Generation of shrimp waste-based dispersant for oil spill response.

Science.gov (United States)

Zhang, Kedong; Zhang, Baiyu; Song, Xing; Liu, Bo; Jing, Liang; Chen, Bing

2018-04-01

In this study, shrimp waste was enzymatically hydrolyzed to generate a green dispersant and the product was tested for crude oil dispersion in seawater. The hydrolysis process was first optimized based on the dispersant effectiveness (DE) of the product. The functional properties of the product were identified including stability, critical micelle concentration, and emulsification activity. Water was confirmed as a good solvent for dispersant generation when compared with three chemical solvents. The effects of salinity, mixing energy, and temperature on the dispersion of the Alaska North Slope (ANS) crude oil were examined. Microtox acute toxicity test was also conducted to evaluate the toxicity of the produced dispersant. In addition, DE of the product on three different types of crude oil, including ANS crude oil, Prudhoe Bay crude oil (PBC), and Arabian Light crude oil (ALC) was compared with that of the Corexit 9500, respectively. The research output could lead to a promising green solution to the oil spill problem and might result in many other environmental applications.

Dispersion of Louisiana crude oil in salt water environment by Corexit 9500A in the presence of natural coastal materials

Science.gov (United States)

Tansel, Berrin; Lee, Mengshan; Berbakov, Jillian; Tansel, Derya Z.; Koklonis, Urpiana

2014-04-01

Effectiveness of Corexit 9500A for dispersing Louisiana crude oil was evaluated in salt water solutions containing natural materials in relation to salinity and dispersant-to-oil ratio (DOR). Experimental results showed that both salinity and DOR had significant effects on dispersion of Louisiana crude oil in the presence of different natural materials. The natural materials added to the salt water solutions included sea sand (South Beach, Miami, Florida), red mangrove leaves (Rhizophora mangle), seaweed (Sargassum natans), and sea grass (Halodule wrightii). Dispersant effectiveness (amount of oil dispersed into the water) was reduced significantly with increasing salinity with the minimum effectiveness observed in the salinity range between 30 and 50 ppt in all aqueous samples containing natural materials. When significant amounts of floating oil were present, the partially submerged natural materials enhanced the transfer of oil into the water column, which improved the dispersion effectiveness. However, dispersant effectiveness was significantly reduced when the amount of floating oil was relatively small and could not be released back to the water column. Surface tension may not be an adequate parameter for monitoring the effectiveness of dispersants in salt water environment. When distilled water was used (i.e., zero salinity), surface tension was significantly reduced with increasing dispersant concentration. However, there was no clear trend in the surface tension of the salt water solutions (17-51 ppt) containing crude oil and natural materials with increasing dispersant concentration.

Novel insight into the role of heterotrophic dinoflagellates in the fate of crude oil in the sea

DEFF Research Database (Denmark)

Almeda, Rodrigo; Connelly, Tara L.; Buskey, Edward J.

2014-01-01

Although planktonic protozoans are likely to interact with dispersed crude oil after a spill, protozoan-mediated processes affecting crude oil pollution in the sea are still not well known. Here, we present the first evidence of ingestion and defecation of physically or chemically dispersed crude...... to 0.37 mu g-oil mg-C-dino (-1) d(-1), which could represent similar to 17% to 100% of dispersed oil in surface waters when heterotrophic dinoflagellates are abundant or bloom. Egestion of faecal pellets containing crude oil by heterotrophic dinoflagellates could contribute to the sinking and flux...... of toxic petroleum hydrocarbons in coastal waters. Our study indicates that crude oil ingestion by heterotrophic dinoflagellates is a noteworthy route by which petroleum enters marine food webs and a previously overlooked biological process influencing the fate of crude oil in the sea after spills....

The comparative effects of oil dispersants and oil/dispersant conjugates on germination of the marine macroalga Phyllospora comosa (Fucales: Phaeophyta)

International Nuclear Information System (INIS)

Burridge, T.R.; Shir, M.-A.

1995-01-01

Germination inhibition of the marine macrophyte Phyllospora comosa was utilized as a sub-lethal end-point to assess and compare the effects of four oil dispersants and dispersed diesel fuel and crude oil combinations. Inhibition of germination by the water-soluble fraction of diesel fuel increased following the addition of each of the dispersants; the nominal 48-h EC 50 concentration of diesel fuel declined from 6800 to approximately 400 μl 1 -1 nominal for each dispersed combination. This contrasted with crude oil, where the addition of two dispersants resulted in an enhanced germination rate and an increase in nominal EC 50 concentrations from 130 μl 1 -1 for the undispersed crude to 4000 and 2500 μl 1 -1 . The results indicate that, while germination inhibition of P. comosa may be enhanced by the chemical dispersal of oil response varies with type of both oil and oil dispersant. (author)

Induction of hsp60 in the rotifer, Brachionus plicatilis exposed to dispersed and undispersed crude oil

International Nuclear Information System (INIS)

Wheelock, C.; Tjeerdema, R.; Wolfe, M.

1995-01-01

The use of chemical dispersants to treat oil spills remains a controversial area. Questions arise as to whether the dispersed oil is in fact more toxic than the original spill, potentially increasing the exposure of organisms in the water column to the dispersed components. Stress proteins, including hsp60, are a group of highly conserved proteins that are induced in response to a wide variety of environmental agents, including UV light, heavy metals, and xenobiotics. They are constitutively expressed, but Brachionus plicatilis has been used to document increased hsp60 levels in response to different environmental stresses. Hsp60 was therefore selected as a sublethal endpoint for B. plicatilis exposed to a range of concentrations of a water accommodated fraction (WAF) of Prudhoe Bay Crude Oil (PBCO), a PCBO/dispersant (Corexit 9527) fraction and a mixture of Corexit 9527 alone. All exposures were done at concentrations below the no observable effect level (NOEL) and at two different salinities, 22 ppt and 34 ppt. Laemmli SDS-PAGE techniques followed by Western Blotting using hsp60 specific antibodies and chemiluminescent detection were used to isolate, identify and measure induced hsp60 as a percentage of control values. Hsp60 induction exhibited a biphasic response with maximal induction occurring at lower concentrations of all three different mixtures, WAF, PBCO/Corexit 9527, and Corexit 9527 alone. Preliminary data found that the dispersed oil is indeed more toxic in terms of hsp60 induction than both the undispersed oil and the dispersing agent alone

Induction of hsp60 in the rotifer, Brachionus plicatilis exposed to dispersed and undispersed crude oil

Energy Technology Data Exchange (ETDEWEB)

Wheelock, C.; Tjeerdema, R.; Wolfe, M. [Univ. of California, Santa Cruz, CA (United States). Dept. of Chemistry and Biochemistry

1995-12-31

The use of chemical dispersants to treat oil spills remains a controversial area. Questions arise as to whether the dispersed oil is in fact more toxic than the original spill, potentially increasing the exposure of organisms in the water column to the dispersed components. Stress proteins, including hsp60, are a group of highly conserved proteins that are induced in response to a wide variety of environmental agents, including UV light, heavy metals, and xenobiotics. They are constitutively expressed, but Brachionus plicatilis has been used to document increased hsp60 levels in response to different environmental stresses. Hsp60 was therefore selected as a sublethal endpoint for B. plicatilis exposed to a range of concentrations of a water accommodated fraction (WAF) of Prudhoe Bay Crude Oil (PBCO), a PCBO/dispersant (Corexit 9527) fraction and a mixture of Corexit 9527 alone. All exposures were done at concentrations below the no observable effect level (NOEL) and at two different salinities, 22 ppt and 34 ppt. Laemmli SDS-PAGE techniques followed by Western Blotting using hsp60 specific antibodies and chemiluminescent detection were used to isolate, identify and measure induced hsp60 as a percentage of control values. Hsp60 induction exhibited a biphasic response with maximal induction occurring at lower concentrations of all three different mixtures, WAF, PBCO/Corexit 9527, and Corexit 9527 alone. Preliminary data found that the dispersed oil is indeed more toxic in terms of hsp60 induction than both the undispersed oil and the dispersing agent alone.

Effect of dispersants on the growth of indigenous bacterial population and biodegradation of crude oil

Digital Repository Service at National Institute of Oceanography (India)

Bhosle, N.B.; Row, A.

Oil dispersants (5 from Castrol Ltd., Bombay and 2 from British Petroleum, London) were studied individually and in combination with Saudi Arabian crude oil for their effect on the growth of indigenous bacteria and on the biodegradation of oil. None...

Interactions between zooplankton and crude oil: toxic effects and bioaccumulation of polycyclic aromatic hydrocarbons.

Directory of Open Access Journals (Sweden)

Rodrigo Almeda

Full Text Available We conducted ship-, shore- and laboratory-based crude oil exposure experiments to investigate (1 the effects of crude oil (Louisiana light sweet oil on survival and bioaccumulation of polycyclic aromatic hydrocarbons (PAHs in mesozooplankton communities, (2 the lethal effects of dispersant (Corexit 9500A and dispersant-treated oil on mesozooplankton, (3 the influence of UVB radiation/sunlight exposure on the toxicity of dispersed crude oil to mesozooplankton, and (4 the role of marine protozoans on the sublethal effects of crude oil and in the bioaccumulation of PAHs in the copepod Acartia tonsa. Mortality of mesozooplankton increased with increasing oil concentration following a sigmoid model with a median lethal concentration of 32.4 µl L(-1 in 16 h. At the ratio of dispersant to oil commonly used in the treatment of oil spills (i.e. 1∶20, dispersant (0.25 µl L(-1 and dispersant-treated oil were 2.3 and 3.4 times more toxic, respectively, than crude oil alone (5 µl L(-1 to mesozooplankton. UVB radiation increased the lethal effects of dispersed crude oil in mesozooplankton communities by 35%. We observed selective bioaccumulation of five PAHs, fluoranthene, phenanthrene, pyrene, chrysene and benzo[b]fluoranthene in both mesozooplankton communities and in the copepod A. tonsa. The presence of the protozoan Oxyrrhis marina reduced sublethal effects of oil on A. tonsa and was related to lower accumulations of PAHs in tissues and fecal pellets, suggesting that protozoa may be important in mitigating the harmful effects of crude oil exposure in copepods and the transfer of PAHs to higher trophic levels. Overall, our results indicate that the negative impact of oil spills on mesozooplankton may be increased by the use of chemical dispersant and UV radiation, but attenuated by crude oil-microbial food webs interactions, and that both mesozooplankton and protozoans may play an important role in fate of PAHs in marine environments.

Interactions between Zooplankton and Crude Oil: Toxic Effects and Bioaccumulation of Polycyclic Aromatic Hydrocarbons

Science.gov (United States)

Almeda, Rodrigo; Wambaugh, Zoe; Wang, Zucheng; Hyatt, Cammie; Liu, Zhanfei; Buskey, Edward J.

2013-01-01

We conducted ship-, shore- and laboratory-based crude oil exposure experiments to investigate (1) the effects of crude oil (Louisiana light sweet oil) on survival and bioaccumulation of polycyclic aromatic hydrocarbons (PAHs) in mesozooplankton communities, (2) the lethal effects of dispersant (Corexit 9500A) and dispersant-treated oil on mesozooplankton, (3) the influence of UVB radiation/sunlight exposure on the toxicity of dispersed crude oil to mesozooplankton, and (4) the role of marine protozoans on the sublethal effects of crude oil and in the bioaccumulation of PAHs in the copepod Acartia tonsa. Mortality of mesozooplankton increased with increasing oil concentration following a sigmoid model with a median lethal concentration of 32.4 µl L−1 in 16 h. At the ratio of dispersant to oil commonly used in the treatment of oil spills (i.e. 1∶20), dispersant (0.25 µl L−1) and dispersant- treated oil were 2.3 and 3.4 times more toxic, respectively, than crude oil alone (5 µl L−1) to mesozooplankton. UVB radiation increased the lethal effects of dispersed crude oil in mesozooplankton communities by 35%. We observed selective bioaccumulation of five PAHs, fluoranthene, phenanthrene, pyrene, chrysene and benzo[b]fluoranthene in both mesozooplankton communities and in the copepod A. tonsa. The presence of the protozoan Oxyrrhis marina reduced sublethal effects of oil on A. tonsa and was related to lower accumulations of PAHs in tissues and fecal pellets, suggesting that protozoa may be important in mitigating the harmful effects of crude oil exposure in copepods and the transfer of PAHs to higher trophic levels. Overall, our results indicate that the negative impact of oil spills on mesozooplankton may be increased by the use of chemical dispersant and UV radiation, but attenuated by crude oil-microbial food webs interactions, and that both mesozooplankton and protozoans may play an important role in fate of PAHs in marine environments. PMID:23840628

Novel insight into the role of heterotrophic dinoflagellates in the fate of crude oil in the sea

Science.gov (United States)

Almeda, Rodrigo; Connelly, Tara L.; Buskey, Edward J.

2014-12-01

Although planktonic protozoans are likely to interact with dispersed crude oil after a spill, protozoan-mediated processes affecting crude oil pollution in the sea are still not well known. Here, we present the first evidence of ingestion and defecation of physically or chemically dispersed crude oil droplets (1-86 μm in diameter) by heterotrophic dinoflagellates, major components of marine planktonic food webs. At a crude oil concentration commonly found after an oil spill (1 μL L-1), the heterotrophic dinoflagellates Noctiluca scintillans and Gyrodinium spirale grew and ingested ~0.37 μg-oil μg-Cdino-1 d-1, which could represent ~17% to 100% of dispersed oil in surface waters when heterotrophic dinoflagellates are abundant or bloom. Egestion of faecal pellets containing crude oil by heterotrophic dinoflagellates could contribute to the sinking and flux of toxic petroleum hydrocarbons in coastal waters. Our study indicates that crude oil ingestion by heterotrophic dinoflagellates is a noteworthy route by which petroleum enters marine food webs and a previously overlooked biological process influencing the fate of crude oil in the sea after spills.

Changes in the chemical composition of the light crude by short-term weathering

International Nuclear Information System (INIS)

Luo, X.; Ma, Q.M.

2006-01-01

In the event of an oil spill, it is important to unambiguously identify the oil and link it to the known source in order to determine environmental impact and legal liability. The fate and behaviour of spilled oil depends on several physical, chemical and biological factors such as evaporation, dissolution, microbial degradation and photooxidation. The chemical composition of the spilled oil changes with weathering. The changes can have a significant effect on the oil's toxicity and can add to the difficulty of identifying spilled oil. This paper presents the results of changes in chemical composition of light crude oil by weathering under natural environmental conditions. Oil samples were analyzed on a gas chromatograph equipped with a mass selective detector. Light crude oil was obtained from the oil cabin of a tanker which spilled oil near the Dalian Sea near China in April 2005. It was shown that the saturated hydrocarbons of light crude oil distribute between n-C 8 and n-C 23 . The most abundant n-alkanes are found in the n-C 10 to n-C 16 . The main chemical compositions of the light crude oil are the n-alkanes and the isoprenoids. The aromatic compounds are subordinate chemical compositions of the light crude oil. A simulated weathering experiment showed that less than n-C 12 of the n-alkanes, toluene, 1,3-dimethyl benzene is lost after 1 day of weathering. The n-C 13 , n-C 14 , naphthalene and 2-methyl-naphthalene are lost on the fifth day of weathering. N-C 15 alkane composition indicates some weatherproof capability. The ratios of n-C 17 /pristine and n-C 18 /phytane were unchanged and useful in identifying the source of the light crude oil during the first 8-day weathering period. By the twenty-first day of weathering, the chemical composition underwent extreme alteration, and the source of the pollution could not be determined by the ratios of pristine/phytane. 12 refs., 3 tabs., 7 figs

Application of ultraviolet fluorometry and excitation-emission matrix spectroscopy (EEMS) to fingerprint oil and chemically dispersed oil in seawater.

Science.gov (United States)

Bugden, J B C; Yeung, C W; Kepkay, P E; Lee, K

2008-04-01

Excitation-emission matrix spectroscopy (EEMS) was used to characterize the ultra violet fluorescence fingerprints of eight crude oils (with a 14,470-fold range of dynamic viscosity) in seawater. When the chemical dispersant Corexit 9500 was mixed with the oils prior to their dispersion in seawater, the fingerprints of each oil changed primarily as an increase in fluorescence over an emission band centered on 445 nm. In order to simplify the wealth of information available in the excitation-emission matrix spectra (EEMs), two ratios were calculated. A 66-90% decrease in the slope ratio was observed with the addition of Corexit. When the slope ratios were reduced in complexity to intensity ratios, similar trends were apparent. As a result either of the ratios could be used as a simple and rapid means of identifying and monitoring chemically dispersed oil in the open ocean.

Chemical dispersants

NARCIS (Netherlands)

Rahsepar, Shokouhalsadat; Smit, Martijn P.J.; Murk, Albertinka J.; Rijnaarts, Huub H.M.; Langenhoff, Alette A.M.

2016-01-01

Chemical dispersants were used in response to the Deepwater Horizon oil spill in the Gulf of Mexico, both at the sea surface and the wellhead. Their effect on oil biodegradation is unclear, as studies showed both inhibition and enhancement. This study addresses the effect of Corexit on oil

Chemical composition of Pechora Sea crude oil

Directory of Open Access Journals (Sweden)

Derkach S. R.

2017-03-01

Full Text Available The physicochemical properties of the Pechora Sea shelf oil and its chemical composition have been studied using the methods of refractometry, titrimetry, viscometry, rheometry and standard methods for the analysis of oil and petroleum products. The fractionation of oil is held at atmospheric pressure, some fractions boiling at the temperature below and above 211 °C have been received. Chemical structural-group composition of oil and its components has been investigated using a Fourier infrared (IR spectroscopy method. The density of oil has been obtained, it is equal to 24.2 API. The chemical composition analysis shows that water content in the investigated oil sample is about 0.03 % (by weight. The oil sample contains hydrocarbons (including alkanes, naphthenes, arenes and asphaltenes with resins; their content is equal to 89 and 10 % (by weight respectively. Alkane content is about 66 %, including alkanes of normal structure – about 37 %. The solidification temperature of oil sample is equal to –43 °C. This low temperature testifies obliquely low content of solid alkanes (paraffin. Bearing in mind the content of asphaltenes with resins we can refer the investigated oil sample to resinous oils. On the other hand spectral coefficient values (aromaticity quotient and aliphaticity quotient show that oil sample belongs to naphthenic oils. According to the data of Fourier IR spectroscopy contents of naphthenes and arenes are 5.9 and 17.8 % respectively. Thus, the obtained data of chemical structural-group composition of crude oil and its fractions indicate that this oil belongs to the heavy resinous naphthenic oils. The rheological parameters obtained at the shear deformation conditions characterize the crude oil as a visco-plastic medium.

Partitioning of fresh crude oil between floating, dispersed and sediment phases: Effect of exposure order to dispersant and granular materials.

Science.gov (United States)

Boglaienko, Daria; Tansel, Berrin

2016-06-15

When three or more high and low energy substrates are mixed, wetting order can significantly affect the behavior of the mixture. We analyzed the phase distribution of fresh floating Louisiana crude oil into dispersed, settled and floating phases depending on the exposure sequence to Corexit 9500A (dispersant) and granular materials. In the experiments artificial sea water at salinity 34‰ was used. Limestone (2.00-0.300 mm) and quartz sand (0.300-0.075 mm) were used as the natural granular materials. Dispersant Corexit 9500A increased the amount of dispersed oil up to 33.76 ± 7.04%. Addition of granular materials after the dispersant increased dispersion of oil to 47.96 ± 1.96%. When solid particles were applied on the floating oil before the dispersant, oil was captured as oil-particle aggregates and removed from the floating layer. However, dispersant addition led to partial release of the captured oil, removing it from the aggregated form to the dispersed and floating phases. There was no visible oil aggregation with the granular materials when quartz or limestone was at the bottom of the flask before the addition of oil and dispersant. The results show that granular materials can be effective when applied from the surface for aggregating or dispersing oil. However, the granular materials in the sediments are not effective neither for aggregating nor dispersing floating oil. Copyright © 2016 Elsevier Ltd. All rights reserved.

SCREENING OF CHEMICAL COMPOSITIONS OF CRUDE WATER EXTRACT OF DIFFERENT CASSAVA VARIETIES

Directory of Open Access Journals (Sweden)

Olajumoke Oke FAYINMINNU

2013-06-01

Full Text Available Chemical composition of three sources of crude cassava water extract (CCWE was evaluated in different varieties of cassava (MS6 Manihot Selection (local variety, TMS 30555 Tropical Manihot Selection (Improved variety and Bulk (crude cassava water from cassava processing site. Crude cassava water extract from the pulp of cassava fresh roots was prepared and the chemical composition was determined in the analytical laboratory. The result of the analysis showed that, hydrocyanic acid (HCN and with elements such as Magnesium (Mg, Manganese (Mn, Iron (Fe, Sulphur (S, Copper (Cu and Zinc (Zn. Nitrogen (N, Phosphorous (P and Potassium (K were found in the extract. The study showed that due to the presence of hydrocyanic acid in the extract, this waste found around the cassava processing sites possesses phytotoxic effects on weeds/vegetation in form of leaf decoloration (yellowing, wilting and eventually death. Crude cassava water extract showed a probable natural herbicide which can be used by the peasant farmers because it is environmental friendly and easily biodegradable into harmless compounds in the environment

Extraction and characterization of crude oil asphaltenes sub fractions

International Nuclear Information System (INIS)

Ferreira, Silas R.; Calado, Lucas S.; Honse, Siller O.; Mansur, Claudia R.E.; Lucas, Elizabete F.

2011-01-01

Asphaltenes from crude oil have been studied for a long time. However, until today their chemical structures and physical-chemical properties are not well established. Nowadays, it is accepted that asphaltenes are dispersed in the crude oil as macro structures, which are mainly constituted of some condensed aromatic rings (about 6-20), containing aliphatic or naphthenic groups. The asphaltenes are also defined as the crude oil fraction that is insoluble in low molar mass n-alkanes and soluble in aromatic solvents, like benzene and toluene In order to investigate the molecular structure, in this work the asphaltenes were separated by using a different procedure as that normally described in the literature and characterized by infrared spectrometry, nuclear magnetic resonance, x-ray fluorescence, elemental analyses and particle size and size distribution. The difference in subfractions polarity can be attributed not only to the aromaticity changes but also to the content of elements, such as N, O, Fe, V, Si e Ni. (author)

Potentially beneficial spill-related effects of chemicals routinely added to crude oils

International Nuclear Information System (INIS)

Ross, S.; Maharaj, S.

1993-01-01

Amoco Trinidad Oil Company produces 60,000 bbl/d of oil from the Trinidadian offshore. The oil is pipelined ashore where it is processed and returned offshore to a buoy mooring for transport up Trinidad's east coast. Amoco Trinidad has developed comprehensive oil spill contingency plans, starting from computer models of spill scenarios. The models used initially assumed that the oils would emulsify quickly and the spills would become highly viscous and persistent, reaching the shoreline in 15-24 h. Such behavior would render ineffective the use of dispersants as a spill countermeasure. Studies showed a poor potential capability of physical recovery systems for spills off the Trinidad east coast due to high sea states, strong winds, and other factors. These results led to questioning of the spill model's assumptions, and laboratory tests were conducted to study the actual behavior of the crude oils. It was found that the oil was difficult to emulsify and highly prone to breakup and dispersion. These surprising results were explained by the presence of surfactants added during processing. A revised modelling exercise showed that if the surfactants stay with the oil, spills up to 100,000 bbl will dissipate in 15 h or less at average wind conditions. To guard against the possibility that the surfactants may not stay with the spilled oil, and to help accelerate dispersion of oil spills, Amoco Trinidad has developed a dispersant-use capacity for its spill contingency plan. It is suggested that additives normally added to crude oils during production and processing in other areas may also be providing spill cleanup benefits similar to those found in the Trinidad case. 9 refs., 1 fig., 4 tabs

Phototoxic potential of undispersed and dispersed fresh and weathered Macondo crude oils to Gulf of Mexico Marine Organisms.

Science.gov (United States)

Finch, Bryson E; Marzooghi, Solmaz; Di Toro, Dominic M; Stubblefield, William A

2017-10-01

Crude oils contain a mixture of hydrocarbons, including phototoxic polycyclic aromatic hydrocarbons (PAHs) that have the ability to absorb ultraviolet (UV) light. Absorption of UV light by PAHs can substantially increase their toxicity to marine organisms. The objective of the present study was to examine the potential for phototoxicity of fresh and naturally weathered Macondo crude oils alone and in combination with the dispersant Corexit 9500 to mysid shrimp (Americamysis bahia), inland silverside (Menidia beryllina), sheepshead minnow (Cyprinodon variegatus), and Gulf killifish (Fundulus grandis). Acute toxicity tests were conducted using combinations of natural or artificial sunlight and low-energy water-accommodated fractions (WAFs) of fresh and weathered Macondo crude oils collected from the Gulf of Mexico. Studies were also conducted to compare the phototoxicity resulting from natural and artificial sunlight. Fresh Macondo crude oil was more phototoxic than weathered crude oils, both in the presence and in the absence of UV light. Differences in toxicity between fresh and weathered crude oils were likely attributed to lighter-ringed PAHs in fresh crude oils. Phototoxic PAHs were relatively resistant to weathering compared with lighter-ringed PAHs. The addition of Corexit 9500 to crude oil increased toxicity compared with tests with crude oil alone, by increasing phototoxic PAH concentrations in WAFs. Macondo crude oils had the potential to be phototoxic to Gulf of Mexico marine organisms if specific light conditions and PAH concentrations were present during the Deepwater Horizon oil spill. Environ Toxicol Chem 2017;36:2640-2650. © 2017 SETAC. © 2017 SETAC.

Assessment of the use of dispersants on oil spills in California marine waters

International Nuclear Information System (INIS)

Trudel, K.; Ross, S.; Belore, R.; Buffington, S.; Ogawa, C.; Panzer, D.

2002-01-01

The technical issues regarding the use of dispersants to clean up oil spills from offshore production sources and transportation sources in California were assessed in this study which examined both operational and environmental issues. The operational issues included the dispersibility of produced and imported oils, along with the capabilities of California response resources to deal with typical spills and limiting environmental impacts to offshore environments. The environmental issues include the risks associated with typical spills and potential net environmental benefit of chemically dispersing oil spills. Most crude oils produced offshore California are heavy and border on the undispersable range, but the imported crudes are somewhat lighter. Modeling has shown that most produced oils and some imported oils emulsify quickly and weather more quickly to the point where they are no longer dispersible. There is a very narrow window of time for chemical dispersions to be used effectively. The net environmental benefit analysis demonstrates that the use of dispersants lessens the total environmental impact of spill scenarios. It was emphasized that it is necessary to act quickly if chemical dispersion is to be effective. Rapid response strategies are needed, including locally based vessel and helicopter spraying systems. 19 refs., 8 tabs., 1 fig

Influence of chemical surfactants on the biodegradation of crude oil by a mixed bacterial culture

International Nuclear Information System (INIS)

Van Hamme, J.D.; Ward, O.P.

1999-01-01

A study was conducted in which the effects of surfactant physicochemical properties on crude oil biodegradation by a mixed-bacterial culture were examined. The effects of hydrophile-lipophile balance (HLB) and molecular structure on the biodegradation of Bow River crude oil were determined. It was shown that chemical surfactants have the potential to improve crude oil biodegradation in complex microbial systems. Surfactant selection should consider factors such as molecular structure, HLB and surfactant concentration. 26 refs., 4 tabs., 3 figs

The effect of gamma irradiation on the chemical composition and digestible crude protein of poultry excreta

International Nuclear Information System (INIS)

Al-Masri, M.R.

1994-06-01

The changes in the chemical composition, digestible crude protein and cell-wall constituents for two types of excreta of laying hens were studied. In type I, excreta were dried at 170-180 C for 10 minutes whereas in type II dried at 55-60 C for several days. Each type was divided into two parts, the first stored for 3 months with the control. The second part was irradiated by gamma irradiation at 100 KGy and stored for 3 months with the control. The results indicated that here was significant decrease in the crude fibre (CF), NDF and ADF between the samples and the control, for the types I and II where CF, NDF and ADF values, before and after storage, decreased by 12%, 5% and 6%, respectively, ADL values decreased by 8% (I) and 3%(II). Hemicellulose and soluble carbohydrate (NFE) values increased by 5% and 7% for types I and II respectively as a result of irradiation in comparison to the control before and after storage. Gamma irradiation had no effect on crude protein, crude fat, crude ash and digested crude protein for types I and II before and after storage. Drying type I at high temperature in comparison to type II, before and after storage, decreased the crude protein values by 16%. Digested crude protein and CF, decreased 12% and NDF by 7%. Storage of excreta after drying had no effect on the chemical changes due to irradiation for types I and II. (author). 23 refs., 6 figs., 7 tabs

Enhanced Gravitational Drainage of Crude Oil Through Alabama Beach Sand Caused by the Dispersant Corexit 9500A

Science.gov (United States)

Steffy, D. A.; Nichols, A.; Hobbs, K.

2017-12-01

Oil spill material released by the 2010 Deepwater Horizon accident contaminated a majority of the 60 miles of Alabama coastline. In response to the oil spill, BP sprayed a dispersant, Corexit 9500A, as an initial remediation effort. An unforeseen impact of the saltwater-dispersant mixture includes the mobilization of oil-spilled material into the underlying beach sand. This study investigated the effect of the dispersant to promote gravitational drainage by measuring the physical characteristics of the sand, saltwater, crude oil, and the dispersant solution. The saltwater-dispersant mixture promoted the downward movement of oil mass 20 times greater extent than just saltwater. These tests are meant to simulate spill material on the beach being exposed to a low-energy, 1-meter mixed tide occurring along the Alabama coastline. A separate test simulated oilwet sand exposed to saltwater and a saltwater-dispersant mixture. The oil-wet sand impeded the vertical movement of saltwater, but allowed a saltwater-dispersant solution to mobilize the oil to migrate downward. The mobilization of oil in this three phase system of saltwater, oil, and air is controlled by: the pressure-saturation profile of the sand; interfacial tension with saltwater; and its surface tension with air.

Chemical dispersibility testing of fresh and weathered oils

International Nuclear Information System (INIS)

Brandvik, P.J.; Daling, P.S.; Aareskjold, K.

1991-05-01

This activity in the DIspersants on Weathered Oils-project (DIWO) is a continuation and an extended study of the dispersibility study described in DIWO report No. 3. The main objective has been to study the chemical dispersibility of fresh and weathered oils produced or transported in Norwegian waters. Other important aims of this study have been: To correlate the effectiveness results obtained by three different laboratory methods; to determine the relationship between the dispersant effectiveness and the change in the oils' physico-chemical properties due to weathering (topping, photo-oxidation and w/o-emulsification). This study has been performed with 8 different oil types and 12 different weathering degrees of each oil type. The work performed clearly demonstrates that the oil type and especially the weathering properties are essential for the performance of dispersants at sea. 41 figs., 5 tabs., 16 refs

Analysis of soil chemical parameters of an uncleaned crude oil spill ...

African Journals Online (AJOL)

Analysis of soil chemical parameters of an uncleaned crude oil spill site at Biara was carried out. Soil samples were collected at 0 -15 cm and 15 – 30 cm soil depths from both polluted and unpolluted sites for analysis. Significant increase in high total hydrocarbon content (1015±80.5 – 1150±90.1 mg/kg) in polluted site was ...

The Theory of Thermodynamics for Chemical Reactions in Dispersed Heterogeneous Systems

Science.gov (United States)

Yongqiang; Baojiao; Jianfeng

1997-07-01

In this paper, the expressions of Gibbs energy change, enthalpy change, entropy change, and equilibrium constant for chemical reactions in dispersed heterogeneous systems are derived using classical thermodynamics theory. The thermodynamical relations for the same reaction system between the dispersed and the block state are also derived. The effects of degree of dispersion on thermodynamical properties, reaction directions, and chemical equilibria are discussed. The results show that the present equation of thermodynamics for chemical reactions is only a special case of the above-mentioned formulas and that the effect of the dispersity of a heterogeneous system on the chemical reaction obeys the Le Chatelier principle of movement of equilibria.

Chemical countermeasures: Dispersants overview of dispersant use (including application) and research issues

International Nuclear Information System (INIS)

Butler, J.N.

1992-01-01

I will attempt in twenty minutes to summarize the state of research on oil spill dispersants as I perceive it. The expertise I bring to this task includes 20 years of experience with the fate and effects of petroleum in the marine environment, including participation in the 1973 and 1981 NRC studies and three years as chairman of the NRC committee on oil spill dispersants. I More recently I served on a committee of the International Maritime Organization which reviewed the open-quotes Impact of oil and related chemicals and wastes on the marine environment.close quotes That report will be published this year. However, my statements in this paper are not made as a representative of either NRC or IMO. They are my own interpretation of scientific literature cited in the above reviews. Dispersants are chemical formulations, which include surface active agents, designed to decrease the interfacial tension between oil and water. Because the first attempts to disperse oil on a large scale, at the Torrey Canyon spill of 1967, used highly toxic degreasing agents, dispersants have an undeserved reputation for toxicity. In fact, for twenty years dispersant formulations have been developed with an emphasis on reducing their toxicity to marine life. The dispersal of oil in water has been documented in the laboratory by dozens of papers (see references in NRC 1989, pp 70-79), and in the field by dozens of studies (NRC 1989, pp 165- 193). The toxicity of commercial dispersant formulations (NRC 1989, pp 81-123) and dispersed oil (NRC 1989, pp 123-147) has been tested on a wide variety of marine organisms ranging from algae to salmonid fishes. The NRC review has been updated by the IMO/GESAMP (1992) study, but the conclusions remain unchanged

Effects of chemical dispersants on oil-brine interfacial tension and droplet formation

International Nuclear Information System (INIS)

Khelifa, A.; So, L.L.C.

2009-01-01

The dispersion of oil spilled in water is influenced by chemical dispersants via the modification of the interfacial properties of the oil, such as oil-brine interfacial tension (IFT). In this study, the physical properties and dispersion of oil were measured in order to determine the effects of chemical dispersants on IFT and oil viscosity and the effects on oil droplet formation. In theory, the maximum size of oil droplet that forms under turbulent mixing increases with IFT. Therefore, a reduction in IFT reduces the size distribution of oil droplets. This paper presented the results of an ongoing project aimed at providing quantitative understanding the influence that chemical dispersants have on the size distribution of oil droplets and oil dispersion. Findings showed that a valid approach is to separate the direct effects of chemical dispersants on oil properties, specifically oil-brine IFT and the effects of mixing on dispersion of chemically treated oil. Under constant mixing conditions, the reduction of the maximum oil droplet size that overcomes the breakage process is determined by the effects of chemical dispersant on oil properties. This correlates well with the dispersant-to-oil ratio (DOR) up to the critical micelle concentration (CMC). This good agreement can be attributed to the reduction of IFT with DOR. It was concluded that the reduction of IFT with dispersant concentration is an additional signature of oil composition on droplet formation, while mixing energy is an external parameter that is independent of oil properties. 17 refs., 3 tabs., 9 figs

Valorization of crude glycerol from biodiesel production

Directory of Open Access Journals (Sweden)

Konstantinović Sandra S.

2016-01-01

Full Text Available The increased production of biodiesel as an alternative fuel involves the simultaneous growth in production of crude glycerol as its main by-product. Therefore, the feasibility and sustainability of biodiesel production requires the effective utilization of crude glycerol. This review describes various uses of crude glycerol as a potential green solvent for chemical reactions, a starting raw material for chemical and biochemical conversions into value-added chemicals, a substrate or co-substrate in microbial fermentations for synthesis of valuable chemicals and production of biogas and biohydrogen as well as a feedstuff for animal feed. A special attention is paid to various uses of crude glycerol in biodiesel production. [Projekat Ministarstva nauke Republike Srbije, br. III 45001

PETROLEUM-COLLECTING AND DISPERSING CHEMICALS FOR ...

African Journals Online (AJOL)

Preferred Customer

Films of petroleum origin reflecting sunlight rays hinder absorption of energy by water necessary for life ... Dispersing chemicals like mechanical clean-up methods have their own place in fighting oil spills. They are ... yellow color, and filtered.

The Braer incident: Dispersion in action

International Nuclear Information System (INIS)

Thomas, D.

1993-01-01

In January 1993, the tanker Braer foundered in the Shetland Islands and pollution from the cargo of 85,000 tonnes of Gullfaks crude oil was reported almost immediately. The tanker was battered by storm winds and finally broke up, spilling the remainder of its cargo into the bay at Garth's Ness. Dispersants were applied to the oil plumes, assisting the significant natural dispersion. Shoreline protection and cleanup activities included construction of spade dams and sorbent barriers. Oil concentrations in water, air, sediment, and fish were monitored. The sampling program undertaken during the spill period is described. Measured hydrocarbon concentrations in salmon farm areas were not observed to rise above 4 ppM. The high rates of dispersion make the Braer incident worthy of detailed study both in terms of understanding the mechanism of the dispersion process and also in assessing the environmental effects following high dispersed oil concentrations. Estimates of the spill's mass balance are provided for the bay at Garth's Ness, where the highest oil concentrations were observed, and along the 26 km of coastline which received the most significant concentrations of dispersed oil. Contrary to laboratory experiments which showed that the Gullfaks crude would emulsify at the high sea states prevailing at the time, the Braer spill did not emulsify and most of the oil released was dispersed naturally into the water column. It appears that it is most appropriate to model the Braer spill as a spillage of floating or dissolved chemical. 4 refs., 4 figs., 6 tabs

Kaolinite and Silica Dispersions in Low-Salinity Environments: Impact on a Water-in-Crude Oil Emulsion Stability

Directory of Open Access Journals (Sweden)

Vladimir Alvarado

2011-10-01

Full Text Available This research aims at providing evidence of particle suspension contributions to emulsion stability, which has been cited as a contributing factor in crude oil recovery by low-salinity waterflooding. Kaolinite and silica particle dispersions were characterized as functions of brine salinity. A reference aqueous phase, representing reservoir brine, was used and then diluted with distilled water to obtain brines at 10 and 100 times lower Total Dissolved Solid (TDS. Scanning Electron Microscope (SEM and X-ray Diffraction (XRD were used to examine at the morphology and composition of clays. The zeta potential and particle size distribution were also measured. Emulsions were prepared by mixing a crude oil with brine, with and without dispersed particles to investigate emulsion stability. The clay zeta potential as a function of pH was used to investigate the effect of particle charge on emulsion stability. The stability was determined through bottle tests and optical microscopy. Results show that both kaolinite and silica promote emulsion stability. Also, kaolinite, roughly 1 mm in size, stabilizes emulsions better than larger clay particles. Silica particles of larger size (5 µm yielded more stable emulsions than smaller silica particles do. Test results show that clay particles with zero point of charge (ZPC at low pH become less effective at stabilizing emulsions, while silica stabilizes emulsions better at ZPC. These result shed light on emulsion stabilization in low-salinity waterflooding.

Evaluating Chemical Dispersant Efficacy In An Experimental Wave Tank: 1, Dispersant Effectiveness As A Function Of Energy Dissipation Rate

Science.gov (United States)

Numerous laboratory test systems have been developed for the comparison of efficacy between various chemical oil dispersant formulations. However, for the assessment of chemical dispersant effectiveness under realistic sea state, test protocols are required to produce hydrodynam...

Behavioural response of pink salmon Fry Oncorhynchus gorbuscha to fresh, weathered, and dispersed crude oil

International Nuclear Information System (INIS)

Moles, A.

2009-01-01

Very little is known about fish behaviour in relation to oil spill contamination. In this study, out-migrant pink salmon fry Oncorhynchus gorbuscha were subjected to varying concentrations of oil and sea water solutions, or uncontaminated sea water at a temperature of 7 degrees C. Fresh oil, artificially weathered oil, and dispersed oil samples were used. Twenty trials were run for concentrations of 48 aromatic and 30alkane hydrocarbons. The number of minutes spent in the uncontaminated water was significantly higher than sample areas. Fry avoided water-accommodated mixtures of Alaska North Slope crude oil in sea water at concentrations of 960 mg/L total aromatic hydrocarbon fresh oil and 873 mg/L total aromatic hydrocarbon dispersed oil. Concentrations corresponded to 75 per cent and 68 per cent of the median lethal concentration level. However, the fry did not avoid the weathered oil, which indicated that the fry may be sensitive to monoaromatic hydrocarbon components in the oil. It was concluded that oil pollution may alter pink salmon migration behaviour. 28 refs., 1 tab., 2 figs

Extraction and characterization of crude oil asphaltenes sub fractions; Extracao e caracterizacao de subfracoes de asfaltenos de petroleo

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Silas R.; Calado, Lucas S.; Honse, Siller O.; Mansur, Claudia R.E.; Lucas, Elizabete F., E-mail: silas@ima.ufrj.br [Universidade Federal do Rio de Janeiro, Instituto de Macromoleculas, Laboratorio de Macromoleculas e Coloides na Industria de Petroleo, Rio de Janeiro, RJ (Brazil)

2011-07-01

Asphaltenes from crude oil have been studied for a long time. However, until today their chemical structures and physical-chemical properties are not well established. Nowadays, it is accepted that asphaltenes are dispersed in the crude oil as macro structures, which are mainly constituted of some condensed aromatic rings (about 6-20), containing aliphatic or naphthenic groups. The asphaltenes are also defined as the crude oil fraction that is insoluble in low molar mass n-alkanes and soluble in aromatic solvents, like benzene and toluene In order to investigate the molecular structure, in this work the asphaltenes were separated by using a different procedure as that normally described in the literature and characterized by infrared spectrometry, nuclear magnetic resonance, x-ray fluorescence, elemental analyses and particle size and size distribution. The difference in subfractions polarity can be attributed not only to the aromaticity changes but also to the content of elements, such as N, O, Fe, V, Si e Ni. (author)

The use of chromatographic indexes to study the biodegradation of crude oil in cold/icy seawater

International Nuclear Information System (INIS)

Siron, R.; Pelletier, E.

1993-01-01

A group of five protected mesocosms (3.5 m 3 each) was used to study the biodegradation of dispersed crude oil in cold and icy seawater. A wide range of oil concentrations was tested over four experiments lasting two weeks to six months. Various oil treatments were studied with respect to the natural bacterial degradation: chemically dispersed and untreated crude oil; and oil adsorbed on, and released from, an immersed substrate. The study was concerned with oil accommodated in the water column, accumulated in surface (sheens and emulsions), and collected in sediment traps. The oil biodegradation was assessed by means of the following gas chromatographic indexes: C17/pristane; C18/phytane; n-alkanes/isoprenoids; pristane/phytane; naphthalene/phenanthrene; 2-methyl naphthalene/1-methyl naphthalene; and methylnaphthalenes/total substituted naphthalenes. A combined index of biodegradation defined from the most significant hydrocarbon ratios is proposed to evaluate the overall biodegradation of dissolved compounds and oil droplets, involving both aliphatic and aromatic hydrocarbons. Coupled with mesocosm facilities, this approach appears very convenient to determine the potential degradability of crude oils by natural indigenous microflora. 26 refs., 11 figs., 2 tabs

Isolation, fractionation and identification of chemical constituents from the leaves crude extracts of Mentha piperita L grown in Sultanate of Oman

Directory of Open Access Journals (Sweden)

Mohammad Amzad Hossain

2014-05-01

Conclusions: According to the results of the present study, the plant crude extracts could be used as medicine for the treatment of different diseases. The analysis and identification of the chemical compounds in the plant crude extracts by using GC-MS was the first time.

Wax deposition in crude oil pipelines

Energy Technology Data Exchange (ETDEWEB)

Assuncao, Pablo Morelato; Rodrigues, Lorennzo Marrochi Nolding [Universidade Federal do Espirito Santo, Sao Mateus, ES (Brazil). Centro Universitario Norte do Espirito Santo. Engenharia de Petroleo; Romero, Mao Ilich [University of Wyoming, Laramie, WY (United States). Enhanced Oil Recovery Institute], e-mail: mromerov@uwyo.edu

2010-07-01

Crude oil is a complex mixture of hydrocarbons which consists of aromatics, paraffins, naphthenics, resins asphaltenes, etc. When the temperature of crude oil is reduced, the heavy components, like paraffin, will precipitate and deposit on the pipe internal wall in the form of a wax-oil gel. The gel deposit consists of wax crystals that trap some amount of oil. As the temperature gets cooler, more wax will precipitate and the thickness of the wax gel will increase, causing gradual solidification of the crude and eventually the oil stop moving inside the offshore pipeline. Crude oil may not be able to be re-mobilized during re-startup. The effective diameter will be reduced with wax deposition, resulting in several problems, for example, higher pressure drop which means additional pumping energy costs, poor oil quality, use of chemical components like precipitation inhibitors or flowing facilitators, equipment failure, risk of leakage, clogging of the ducts and process equipment. Wax deposition problems can become so sever that the whole pipeline can be completely blocked. It would cost millions of dollars to remediate an offshore pipeline that is blocked by wax. Wax solubility decreases drastically with decreasing temperature. At low temperatures, as encountered in deep water production, is easy to wax precipitate. The highest temperature below which the paraffins begins to precipitate as wax crystals is defined as wax appearance temperature (WAT). Deposition process is a complex free surface problem involving thermodynamics, fluid dynamics, mass and heat transfer. In this work, a numerical analysis of wax deposition by molecular diffusion and shear dispersion mechanisms in crude oil pipeline is studied. Diffusion flux of wax toward the wall is estimated by Fick's law of diffusion, in similar way the shear dispersion; wax concentration gradient at the solid-liquid interface is obtained by the volume fraction conservation equation; and since the wax deposition

Effects of three types of oil dispersants on biodegradation of dispersed crude oil in water surrounding two Persian gulf provinces.

Science.gov (United States)

Zolfaghari-Baghbaderani, Azadeh; Emtyazjoo, Mozhgan; Poursafa, Parinaz; Mehrabian, Sedigheh; Bijani, Samira; Farkhani, Daryoush; Mirmoghtadaee, Parisa

2012-01-01

To determine the most effective and biodegradable dispersant of spilled oil in water surrounding two Persian Gulf provinces. This study compared the effects of three dispersants, Pars 1, Pars 2, and Gamlen OD4000 on removal of oil in two Persian Gulf provinces' water. Overall, 16 stations were selected. Using the Well method, the growth rate of isolated bacteria and fungi was identified. To specify the growth rate of microorganisms and their usage of oil in the presence of the above-mentioned dispersants, as exclusive sources of carbon, the bacteria were grown in culture medium for 28 days at 120 rpm, 30°C, and their optical density was measured by spectrophotometry. Then, we tested biological oxygen demand (BOD) and chemical oxygen demand (COD) in microorganisms. The highest growth rate was documented for the growth of microorganisms on either Pars 1 or Pars 2 dispersants or their mixtures with oil. However, the culture having microorganisms grown on Pars 1 had higher BOD and COD than the other two dispersants (9200 and 16800 versus 500 and 960, P microorganisms grown on Pars 2 had maximum amount of BOD and COD in comparison with Pars 1 and Gamlen dispersants (7100 and 15200 versus 6000 and 10560, P < 0.05). Pars 1 and Pars 2 were the most effective dispersants with highest degradability comparing Gamlen. In each region, the most suitable compound for removing oil spill from offshores with least secondary contamination should be investigated.

Influence of dispersants on trophic transfer of petroleum hydrocarbons in a marine food chain

Energy Technology Data Exchange (ETDEWEB)

Wolfe, M.; Tjeerdema, R. [Univ. of California, Santa Cruz, CA (United States). Dept. of Chemistry and Biochemistry; Sowby, M. [California Dept. of Fish and Game, Sacramento, CA (United States)

1995-12-31

When crude oil is accidentally released into the ocean, it threatens many levels of marine life. Intervention, in the form of chemical dispersing agents, alters the normal behavior of petroleum hydrocarbons (PH) by increasing their functional water solubility and the extent of their exposure to sub-surface organisms. Dispersing agents may modify bioavailability as a result of altered interactions between dispersed PH droplets and organismal cell membranes.The objective of this research was to determine the impact of dispersing agents on PH bioavailability and trophic transfer in primary levels of a marine food chain. Uptake, bioaccumulation, depuration, and metabolic transformation of a model PH, {sup 14}C-naphthalene, were measured and compared for Prudhoe Bay Crude Oil (PBCO) dispersed with Corexit 9527 and undispersed preparations of the water-accommodated fractions (WAF) of PBCO at two salinities and temperatures. The model food chain consisted of Isochrysis galbana and Brachionus plicatilis. Direct aqueous exposure was compared with combined aqueous and dietary exposure. Fractionation and identification of metabolites was done by HPLC co-chromatography with analytical standards, and quantitation was done by liquid scintillation counting. GC-FID characterization of WAF and dispersed oil (DO) preparations shows higher concentrations of petroleum hydrocarbons and a greater number of individual constituents in the dispersed oil preparations.

Influence of dispersants on trophic transfer of petroleum hydrocarbons in a marine food chain

International Nuclear Information System (INIS)

Wolfe, M.; Tjeerdema, R.

1995-01-01

When crude oil is accidentally released into the ocean, it threatens many levels of marine life. Intervention, in the form of chemical dispersing agents, alters the normal behavior of petroleum hydrocarbons (PH) by increasing their functional water solubility and the extent of their exposure to sub-surface organisms. Dispersing agents may modify bioavailability as a result of altered interactions between dispersed PH droplets and organismal cell membranes.The objective of this research was to determine the impact of dispersing agents on PH bioavailability and trophic transfer in primary levels of a marine food chain. Uptake, bioaccumulation, depuration, and metabolic transformation of a model PH, 14 C-naphthalene, were measured and compared for Prudhoe Bay Crude Oil (PBCO) dispersed with Corexit 9527 and undispersed preparations of the water-accommodated fractions (WAF) of PBCO at two salinities and temperatures. The model food chain consisted of Isochrysis galbana and Brachionus plicatilis. Direct aqueous exposure was compared with combined aqueous and dietary exposure. Fractionation and identification of metabolites was done by HPLC co-chromatography with analytical standards, and quantitation was done by liquid scintillation counting. GC-FID characterization of WAF and dispersed oil (DO) preparations shows higher concentrations of petroleum hydrocarbons and a greater number of individual constituents in the dispersed oil preparations

Effects of Three Types of Oil Dispersants on Biodegradation of Dispersed Crude Oil in Water Surrounding Two Persian Gulf Provinces

Directory of Open Access Journals (Sweden)

Azadeh Zolfaghari-Baghbaderani

2012-01-01

Full Text Available Objective. To determine the most effective and biodegradable dispersant of spilled oil in water surrounding two Persian Gulf provinces. Methods. This study compared the effects of three dispersants, Pars 1, Pars 2, and Gamlen OD4000 on removal of oil in two Persian Gulf provinces' water. Overall, 16 stations were selected. Using the Well method, the growth rate of isolated bacteria and fungi was identified. To specify the growth rate of microorganisms and their usage of oil in the presence of the above-mentioned dispersants, as exclusive sources of carbon, the bacteria were grown in culture medium for 28 days at 120 rpm, 30∘C, and their optical density was measured by spectrophotometry. Then, we tested biological oxygen demand (BOD and chemical oxygen demand (COD in microorganisms. Results. The highest growth rate was documented for the growth of microorganisms on either Pars 1 or Pars 2 dispersants or their mixtures with oil. However, the culture having microorganisms grown on Pars 1 had higher BOD and COD than the other two dispersants (9200 and 16800 versus 500 and 960, P<0.05. Mixture of oil and Pars 2 as well as oil and Pars 1 dispersants showed the highest BODs and CODs, respectively. In the Bahregan province, microorganisms grown on Pars 2 had maximum amount of BOD and COD in comparison with Pars 1 and Gamlen dispersants (7100 and 15200 versus 6000 and 10560, P<0.05. Conclusion. Pars 1 and Pars 2 were the most effective dispersants with highest degradability comparing Gamlen. In each region, the most suitable compound for removing oil spill from offshores with least secondary contamination should be investigated.

Effects of Three Types of Oil Dispersants on Biodegradation of Dispersed Crude Oil in Water Surrounding Two Persian Gulf Provinces

International Nuclear Information System (INIS)

Zolfaghari-Baghbaderani, A.; Bijani, S.; Zolfaghari-Baghbaderani, A.; Bijani, S.; Emtyazjoo, M.; Emtyazjoo, M.; Poursafa, P.; Mehrabian, S.; Farkhani, D.; Mirmoghtadaee, P.

2012-01-01

Objective. To determine the most effective and biodegradable dispersant of spilled oil in water surrounding two Persian Gulf provinces. Methods. This study compared the effects of three dispersants, Pars 1, Pars 2, and Gamlen OD4000 on removal of oil in two Persian Gulf provinces' water. Overall, 16 stations were selected. Using the Well method, the growth rate of isolated bacteria and fungi was identified. To specify the growth rate of microorganisms and their usage of oil in the presence of the above-mentioned dispersants, as exclusive sources of carbon, the bacteria were grown in culture medium for 28 days at 120 rpm, 30 C, and their optical density was measured by spectrophotometry. Then, we tested biological oxygen demand (BOD) and chemical oxygen demand (COD) in microorganisms. Results. The highest growth rate was documented for the growth of microorganisms on either Pars 1 or Pars 2 dispersants or their mixtures with oil. However, the culture having microorganisms grown on Pars 1 had higher BOD and COD than the other two dispersants (9200 and 16800 versus 500 and 960, P<0.05). Mixture of oil and Pars 2 as well as oil and Pars 1 dispersants showed the highest BODs and CODs, respectively. In the Bahregan province, microorganisms grown on Pars 2 had maximum amount of BOD and COD in comparison with Pars 1 and Gamlen dispersants (7100 and 15200 versus 6000 and 10560, P<0.05). Conclusion. Pars 1 and Pars 2 were the most effective dispersants with highest degradability comparing Gamlen. In each region, the most suitable compound for removing oil spill from off shores with least secondary contamination should be investigated.

A new approach to model strain change of gelled waxy crude oil under constant stress

DEFF Research Database (Denmark)

Hou, Lei; Song, Changyu; Yan, Wei

2014-01-01

Deformation of gelled waxy crude oil with loaded stress is worthy of research for the flow assurance of pipelining system. A dispersion parameter was introduced to characterize the disruption degree of wax crystal structure in crude oil with shear action. Based on fractional calculus theory, a rh...... monotonously with test temperature. Multiple creep curves of gelled waxy crude oil at a certain temperature can be described with this model......., a rheological model incorporating dispersion parameter was proposed to describe creep of gelled waxy crude. A discrete and numerical algorithm was proposed to solve the model. Combining with the experimental results of five kinds of waxy crude oil, the model parameters were regressed and found to change...

DOE/DOT Crude Oil Characterization Research Study, Task 2 Test Report on Evaluating Crude Oil Sampling and Analysis Methods

Energy Technology Data Exchange (ETDEWEB)

Lord, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Allen, Ray [Allen Energy Services, Inc., Longview, TX (United States); Rudeen, David [GRAM, Inc., Albuquerque, NM (United States)

2017-11-01

The Crude Oil Characterization Research Study is designed to evaluate whether crude oils currently transported in North America, including those produced from "tight" formations, exhibit physical or chemical properties that are distinct from conventional crudes, and how these properties associate with combustion hazards with may be realized during transportation and handling.

Chemical oil-spill dispersants: evaluation of three laboratory procedures for estimating performance

International Nuclear Information System (INIS)

Clayton, J.R.; Marsden, P.

1992-09-01

The report presents data from studies designed to evaluate characteristics of selected bench-scale test methods for estimating performance of chemical agents for dispersing oil from surface slicks into an underlying water column. In order to mitigate the effect of surface slicks with chemical dispersant agents, however, an on-scene coordinator must have information and an understanding of performance characteristics for available dispersant agents. Performance of candidate dispersant agents can be estimated on the basis of laboratory testing procedures that are designed to evaluate performance of different agents. Data presented in the report assist in the evaluation of candidate test methods for estimating performance of candidate dispersant agents. Three test methods were selected for evaluating performance: the currently accepted Revised Standard EPA test, Environmental Canada's Swirling Flask test, and the IFP-Dilution test

用新型活化剂强化原油蒸馏过程的研究%INTENSIFYING DISTILLATION OF CRUDE OIL BY USING NEW ACTIVATOR

Institute of Scientific and Technical Information of China (English)

刘红研; 沙峰; 詹亚力; 朱建华

2001-01-01

By using activator to change the state of crude oil and to diminish the size of dispersed phase,mass transfer in distillation process is intensified and distillate yield is increased.In this work,the new activators R1 and R2 were used as the additives respectively,and the intensifying effects to Daqing crude oil were examined at different concentrations and liquid phase temperatures by means of simple distillation and TBP distillation.The interaction mechanisms between the new activators and the crude oil or residues were analyzed,the intensifying effects by the new activators were also studied.Finally,the conceptual technique of "chemical intensification distillation”was put forward.

Effectiveness of dispersants on thick oil slicks

International Nuclear Information System (INIS)

Ross, S.; Belore, R.

1993-01-01

Experiments were conducted to determine the relationship between dispersant effectiveness and oil slick thickness, and thereby determine the optimum time for applying dispersant onto spilled oil at sea. Tests were completed at a lab-scale level by varying the three parameters of oil type, dispersant application, and oil thickness. The tests were intended to be comparative only. The primary oils used were Alberta sweet mix blend and Hibernia B-27 crude. The dispersant, Corexit 9527, was applied either premixed with the oil, dropwise in one application, or dropwise in multiple applications to simulate a multi-hit aircraft operation. The apparatus used in the experiment was an oscillating hoop tank, with oil-containing rings used to obtain and maintain uniform slick thickness. The results indicate that the effectiveness potential of a chemical dispersant does not decrease as slick thickness increases. In fact, results of the tests involving Hibernia oil suggest that oils that tend to herd easily would be treated more effectively if dispersant were applied when the oil was relatively thick (1 mm or greater) to avoid herding problems. The oil slicks premixed with dispersant did not disperse well in the thick oil tests, not because of dispersant-oil interaction problems but because of reduced mixing energy. 6 refs., 4 figs., 1 tab

Influence of asphaltene aggregation and pressure on crude oil emulsion stability

Energy Technology Data Exchange (ETDEWEB)

Auflem, Inge Harald

2002-07-01

Water-in-crude oil emulsions stabilised by various surface-active components are one of the major problems in relation to petroleum production. This thesis presents results from high-pressure separation experiments on ''live'' crude oil and model oil emulsions, as well as studies of Interactions between various indigenous stabilising materials in crude oil. A high-pressure separation rig was used to study the influence of gas and gas bubbles on the separation of water-in-crude oil emulsions. The results were interpreted as a flotation effect from rising gas bubbles, which led to increased separation efficiency. The separation properties of a ''live'' crude oil were compared to crude oil samples recombined with various gases. The results showed that water-in-oil emulsions produced from the ''live'' crude oil samples, generally separated faster and more complete, than emulsions based on recombined samples of the same crude oil. Adsorption of asphaltenes and resins onto a hydrophilic surface from solutions with varying aromatic/aliphatic character was investigated by a quarts crystal microbalance. The results showed that asphaltenes adsorbed to a larger degree than the resins. The resins were unable to desorb pre-adsorbed asphaltenes from the surface, and neither did they adsorb onto the asphaltene-coated surface. In solutions of both of resins and asphaltenes the two constituents associated in bulk liquid and adsorbed to the surface in the form of mixed aggregates. Near infrared spectroscopy and pulsed field gradient spin echo nuclear magnetic resonance were used to study asphaltene aggregation and the influence of various amphiphiles on the asphaltene aggregate size. The results showed Interactions between the asphaltenes and various chemicals, which were proposed to be due to acid-base interactions. Among the chemicals used were various naphthenic acids. Synthesised monodisperse acids gave a reduction of size of the asphaltene aggregates, whereas polydisperse

Influence of asphaltene aggregation and pressure on crude oil emulsion stability

Energy Technology Data Exchange (ETDEWEB)

Auflem, Inge Harald

2002-07-01

Water-in-crude oil emulsions stabilised by various surface-active components are one of the major problems in relation to petroleum production. This thesis presents results from high-pressure separation experiments on ''live'' crude oil and model oil emulsions, as well as studies of Interactions between various indigenous stabilising materials in crude oil. A high-pressure separation rig was used to study the influence of gas and gas bubbles on the separation of water-in-crude oil emulsions. The results were interpreted as a flotation effect from rising gas bubbles, which led to increased separation efficiency. The separation properties of a ''live'' crude oil were compared to crude oil samples recombined with various gases. The results showed that water-in-oil emulsions produced from the ''live'' crude oil samples, generally separated faster and more complete, than emulsions based on recombined samples of the same crude oil. Adsorption of asphaltenes and resins onto a hydrophilic surface from solutions with varying aromatic/aliphatic character was investigated by a quarts crystal microbalance. The results showed that asphaltenes adsorbed to a larger degree than the resins. The resins were unable to desorb pre-adsorbed asphaltenes from the surface, and neither did they adsorb onto the asphaltene-coated surface. In solutions of both of resins and asphaltenes the two constituents associated in bulk liquid and adsorbed to the surface in the form of mixed aggregates. Near infrared spectroscopy and pulsed field gradient spin echo nuclear magnetic resonance were used to study asphaltene aggregation and the influence of various amphiphiles on the asphaltene aggregate size. The results showed Interactions between the asphaltenes and various chemicals, which were proposed to be due to acid-base interactions. Among the chemicals used were various naphthenic acids. Synthesised monodisperse acids gave a reduction of

Experimental Study on Characteristics of Oil Particle Distribution in Water-Gelled Crude Oil Two-Phase Flow System

Directory of Open Access Journals (Sweden)

Liu Xiaoyan

2014-06-01

Full Text Available The conventional gathering and transportation mode of heating the produced fluid of oil wells with hot water or steam may result in excessive energy consumption. In order to perform the unheated transportation, the idea of hydraulic suspension transport of the gelled crude oil is proposed based on the actual production of Daqing Oilfield, and the experimental system is established to test characteristics of oil particle distribution which have an important effect on the hydraulic suspension transportation. In the experiment, the image of gelled crude oil particle distribution was obtained in a horizontal pipe with inner diameter of 0.053 m, and then the law of particle distribution was investigated by the theoretical model. The results showed that the gelled crude oil hydraulic suspension transport could be achieved without any chemical reagent when the gelled crude oil was transformed into particles and dispersedly suspended in water. The results also showed that the gelled oil particles of 0–4 mm in size accounted for 92% or more of all particles, and the percentage of gelled crude oil particles of a size of 4 mm gradually increased with the increasing mixed flow rate.

Influence of dispersants on petroleum bioavailability in a marine food chain

International Nuclear Information System (INIS)

Wolfe, M.; Tjeerdema, R.

1995-01-01

When crude oil is accidentally released into the ocean it threatens many levels of marine life. Intervention, in the form of chemical dispersing agents, may alter the normal behavior of petroleum hydrocarbons (PH) by increasing their functional water solubility and the extent of their exposure to sub-surface marine organisms. Further, the dispersing agent may modify bioavailability as a result of altered interactions between dispersed PH droplets and organismal cell membranes, To date, little information exists on the sub-lethal effects of dispersants and factors modifying their role in the bioavailability and disposition of PH in marine food chains. The objective of the current research was to determine the impact of dispersing agents on PH bioavailability to primary levels of a marine food chain. Uptake, bioaccumulation, deputation, and metabolic transformation of a model PH, 14 C-naphthalene, were measured and compared for dispersed Prudhoe Bay Crude Oil (PBCO) vs. undispersed preparations of the water-accommodated fractions (WAF) of PBCO at two salinities (22 and 34 ppt) employing Isochrysis galbana, a primary producer, and Brachionus plicatilis, a primary consumer. Fractionation and identification of metabolites was done by HPLC co-chromatography with analytical standards, and quantitation was done by liquid scintillation counting. GC-FID characterization of WAF and dispersed oil preparations shows higher concentrations of petroleum hydrocarbons and a greater number of individual constituents in the dispersed oil preparations. However, short term (eight hour) and long term (two week) static exposure studies indicate the uptake of 14 C-naphthalene from WAF preparations is inhibited by up to 50% from dispersed oil preparations. Results of comparative static and flow-through chamber exposure studies will be presented

Influence of dispersants on petroleum bioavailability in a marine food chain

Energy Technology Data Exchange (ETDEWEB)

Wolfe, M.; Tjeerdema, R. [Univ. of California, Santa Cruz, CA (United States). Dept. of Chemistry and Biochemistry; Sowby, M. [California Dept. of Fish and Game, Sacramento, CA (United States)

1995-12-31

When crude oil is accidentally released into the ocean it threatens many levels of marine life. Intervention, in the form of chemical dispersing agents, may alter the normal behavior of petroleum hydrocarbons (PH) by increasing their functional water solubility and the extent of their exposure to sub-surface marine organisms. Further, the dispersing agent may modify bioavailability as a result of altered interactions between dispersed PH droplets and organismal cell membranes, To date, little information exists on the sub-lethal effects of dispersants and factors modifying their role in the bioavailability and disposition of PH in marine food chains. The objective of the current research was to determine the impact of dispersing agents on PH bioavailability to primary levels of a marine food chain. Uptake, bioaccumulation, deputation, and metabolic transformation of a model PH, {sup 14}C-naphthalene, were measured and compared for dispersed Prudhoe Bay Crude Oil (PBCO) vs. undispersed preparations of the water-accommodated fractions (WAF) of PBCO at two salinities (22 and 34 ppt) employing Isochrysis galbana, a primary producer, and Brachionus plicatilis, a primary consumer. Fractionation and identification of metabolites was done by HPLC co-chromatography with analytical standards, and quantitation was done by liquid scintillation counting. GC-FID characterization of WAF and dispersed oil preparations shows higher concentrations of petroleum hydrocarbons and a greater number of individual constituents in the dispersed oil preparations. However, short term (eight hour) and long term (two week) static exposure studies indicate the uptake of{sup 14}C-naphthalene from WAF preparations is inhibited by up to 50% from dispersed oil preparations. Results of comparative static and flow-through chamber exposure studies will be presented.

Sequential enrichment of microbial population exhibiting enhanced biodegradation of crude oil

International Nuclear Information System (INIS)

Venkateswaran, Kasthuri; Harayama, Shigeaki.

1995-01-01

The distribution of oil-degrading bacteria in the coastal waters and sediments of Hokkaido, Japan, was surveyed. It was found that the potential of mixed microbial populations to degrade weathered crude oil was not confined to any ecological components (water or sediment) nor to the sampling stations. One microbial culture that was stable during repeated subculturing degraded 45% of the saturates and 20% of the aromatics present in crude oil in 10 days during the initial screening. The residual hydrocarbons in this culture were extracted by chloroform and dispersed in a fresh seawater-based medium and subsequently inoculated with microorganisms from the first culture. After full growth of the second culture, the residual hydrocarbons were extracted and dispersed in a fresh medium in which microorganisms from the second culture had been inoculated. This sequential process was carried out six times to enrich those microorganisms that grew on the recalcitrant components of crude oil. After repeated exposure of the residual crude oil to the enriched microorganisms, about 80% of the initially added crude oil was degraded. The cultures obtained after each enrichment cycle were kept, and the degradation of fresh crude oil by the enriched microorganisms was monitored. The degrading activity of the enriched cultures increased as the number of enrichment cycles increased. A microbial population that had been selected six times on the residual crude oil could degrade 70% of the saturates and 30% of the aromatics of crude oil, indicating that growth of a microbial population on residual crude oil improved its ability to biodegrade crude oil. 21 refs., 2 tabs., 7 figs

Effect of Chemical Remediation of Crude-Oil-Polluted Agricultural Land on Soil Properties and Crop Performance

Directory of Open Access Journals (Sweden)

O. E. Essien

2010-06-01

Full Text Available Chemical degreaser with detergent was used to wash crude-oil-polluted agricultural soil and restore it to 83% -93% of the unpolluted soil's status for sustainable productivity. Comparison of reclaimed soil's properties with unpolluted soil sample of the significant differences (p=0.05 between their values for soil moisture content, soil pH, evapotranspiration, root elongation and soil fertility. Root elongation at 1.1 cm/day in the reclaimed soil compared with 1.29 cm/day in unpolluted soil indicated 83% recovery. Saturated hydraulic conductivity also had 83% recovery. However, infiltration rate showed a low recovery of 30%, perhaps, due to the wetness of the reclaimed soil's surface prior to the reclamation process. The soil macro/microspores were unblocked by the degreaser enabling the root pores to overcome the osmotic problem caused by oil-molecules' blockade and conduct moisture through to the phloem and leaves to sustain evapotranspiration, leaves turgidity chemical reclamation by degreaser with detergent is highly recommended for short-duration in-situ remediation of crude-oil-polluted agricultural land.

Include dispersion in quantum chemical modeling of enzymatic reactions: the case of isoaspartyl dipeptidase.

Science.gov (United States)

Zhang, Hai-Mei; Chen, Shi-Lu

2015-06-09

The lack of dispersion in the B3LYP functional has been proposed to be the main origin of big errors in quantum chemical modeling of a few enzymes and transition metal complexes. In this work, the essential dispersion effects that affect quantum chemical modeling are investigated. With binuclear zinc isoaspartyl dipeptidase (IAD) as an example, dispersion is included in the modeling of enzymatic reactions by two different procedures, i.e., (i) geometry optimizations followed by single-point calculations of dispersion (approach I) and (ii) the inclusion of dispersion throughout geometry optimization and energy evaluation (approach II). Based on a 169-atom chemical model, the calculations show a qualitative consistency between approaches I and II in energetics and most key geometries, demonstrating that both approaches are available with the latter preferential since both geometry and energy are dispersion-corrected in approach II. When a smaller model without Arg233 (147 atoms) was used, an inconsistency was observed, indicating that the missing dispersion interactions are essentially responsible for determining equilibrium geometries. Other technical issues and mechanistic characteristics of IAD are also discussed, in particular with respect to the effects of Arg233.

Contributions of chemical and diffusive exchange to T1ρ dispersion.

Science.gov (United States)

Cobb, Jared Guthrie; Xie, Jingping; Gore, John C

2013-05-01

Variations in local magnetic susceptibility may induce magnetic field gradients that affect the signals acquired for MR imaging. Under appropriate diffusion conditions, such fields produce effects similar to slow chemical exchange. These effects may also be found in combination with other chemical exchange processes at multiple time scales. We investigate these effects with simulations and measurements to determine their contributions to rotating frame (R1ρ ) relaxation in model systems. Simulations of diffusive and chemical exchange effects on R1ρ dispersion were performed using the Bloch equations. Additionally, R1ρ dispersion was measured in suspensions of Sephadex and latex beads with varying spin locking fields at 9.4 T. A novel analysis method was used to iteratively fit for apparent chemical and diffusive exchange rates with a model by Chopra et al. Single- and double-inflection points in R1ρ dispersion profiles were observed, respectively, in simulations of slow diffusive exchange alone and when combined with rapid chemical exchange. These simulations were consistent with measurements of R1ρ in latex bead suspensions and small-diameter Sephadex beads that showed single- and double-inflection points, respectively. These observations, along with measurements following changes in temperature and pH, are consistent with the combined effects of slow diffusion and rapid -OH exchange processes. Copyright © 2012 Wiley Periodicals, Inc.

Bacterial degradation of emulsified crude oil and the effects of various surfactants

International Nuclear Information System (INIS)

Bruheim, P.; Bredholt, H.; Eimhjellen, K.

1997-01-01

The effects of surfactants on the oxidation rate of alkanes in crude oil were investigated using a selected bacterial species, Rhodococcus sp., pregrown to various growth stages. Oxidation rates were measured in a three-hour period by Warburg respirometry. Response to emulsified oil was found to be dependent on the physiological state of the bacteria. In the exponential growth phase oxidation rates were negatively affected by surfactant amendment, whereas in the stationary growth phase oxidation rates appear to have been stimulated. The stimulatory effect was attributed to the chemical structure and physico-chemical properties of the surfactants. Surfactants with hydrophilic-lipophilic balance values (HLB) in the intermediate range of 8-12 gave the best values. Neither the commercial dispersants nor the biosurfactants exhibited any stimulative effects. 21 refs., 4 tabs., 1 fig

Recent advances in the production of value added chemicals and lipids utilizing biodiesel industry generated crude glycerol as a substrate - Metabolic aspects, challenges and possibilities: An overview.

Science.gov (United States)

Vivek, Narisetty; Sindhu, Raveendran; Madhavan, Aravind; Anju, Alphonsa Jose; Castro, Eulogio; Faraco, Vincenza; Pandey, Ashok; Binod, Parameswaran

2017-09-01

One of the major ecological concerns associated with biodiesel production is the generation of waste/crude glycerol during the trans-esterification process. Purification of this crude glycerol is not economically viable. In this context, the development of an efficient and economically viable strategy would be biotransformation reactions converting the biodiesel derived crude glycerol into value added chemicals. Hence the process ensures the sustainability and waste management in biodiesel industry, paving a path to integrated biorefineries. This review addresses a waste to wealth approach for utilization of crude glycerol in the production of value added chemicals, current trends, challenges, future perspectives, metabolic approaches and the genetic tools developed for the improved synthesis over wild type microorganisms were described. Copyright © 2017 Elsevier Ltd. All rights reserved.

Chemical Characteristics and Antioxidant Properties of Crude Water Soluble Polysaccharides from Four Common Edible Mushrooms

Directory of Open Access Journals (Sweden)

Pei-Long Sun

2012-04-01

Full Text Available Four crude water soluble polysaccharides, CABP, CAAP, CFVP and CLDP, were isolated from common edible mushrooms, including Agaricus bisporus, Auricularia auricula, Flammulina velutipes and Lentinus edodes, and their chemical characteristics and antioxidant properties were determined. Fourier Transform-infrared analysis showed that the four crude polysaccharides were all composed of β-glycoside linkages. The major monosaccharide compositions were D-galactose, D-glucose and D-mannose for CABP, CAAP and CLDP, while CFVP was found to consist of L-arabinose, D-galactose, D-glucose and D-mannose. The main molecular weight distributions of CABP and the other three polysaccharides were 66.0 × 104 Da, respectively. Antioxidant properties of the four polysaccharides were evaluated in in vitro systems and CABP showed the best antioxidant properties. The studied mushroom species could potentially be used in part of well-balanced diets and as a source of antioxidant compounds.

In vitro crude protein digestibility of Tenebrio molitor and Hermetia illucens insect meals and its correlation with chemical composition traits

Directory of Open Access Journals (Sweden)

Stefania Marono

2015-07-01

Full Text Available The aims of this study were to evaluate the correlation between in vitro crude protein digestibility coefficients of insect meals from Tenebrio molitor (TI and Hermetia illucens (HI and their chemical composition traits as well as to develop regression equations able to estimate the in vitro crude protein digestibility (CPd from proximate analysis of insect meals. Twelve samples of insect meals (6 from TM larvae, TM 1-6 and 6 from HI larvae, HI 1-6 were obtained from different producers and analysed for chemical composition and in vitro crude protein digestibility by a two-step enzymatic method (digestion with pepsin and trypsin-enriched pancreatin. For both insect meal samples, CPd was negatively correlated to ADF and chitin contents, while just for HI there was a positive correlation (P<0.01 between CP percentage of the samples and CPd. For both insect meals the former variable chosen in the stepwise analysis was the chitin, explaining the 79.45% of CPd variability for Tenebrio molitor samples and the 98.30% for Hermetia illucens. In the second step, the amount of protein linked to ADF was added in the model for T. molitor and CP for H. illucens samples. The coefficients chitin is the main constituent of insect body able to affect the crude protein digestibility of Tenebrio molitor and Hermetia illucens larvae meals estimated by an in vitro enzymatic method.

Do oil dispersants make spilled oil more toxic to fish?

International Nuclear Information System (INIS)

Hodson, P.

2010-01-01

The Deepwater Horizon blowout in the Gulf of Mexico was the world's largest oil spill in terms of duration and volume spilled. Clean-up operations, which involved the continuous and wide-spread use of oil dispersant at the surface and at the seabed discharge point at 1500 metres depth, gave rise to public concern about dispersant toxicity. Reports from the United States Environmental Protection Agency (EPA) claimed little difference in acute toxicity to marine fish and invertebrate species among commonly available dispersants and between dispersed and non-dispersed Louisiana Sweet Crude. Technically, the toxicity of waterborne hydrocarbons does not vary with chemical dispersion. However, the EPA omitted any consideration of loading, and misled the public about the risks of dispersant use in oil clean-up. This study examined the chronic toxicity of dispersed oil to fish embryos. The study revealed that toxicity expressed as oil loading increases by a factor of 10 to 1000 times with dispersion, largely because 10 to 1000 times more oil enters the water column. Since the action of dispersant is on the exposure component of the risk equation, not on the potency of the toxic components of oil, then the risk of oil toxicity to fish increases an equivalent amount.

Conserving archaeological sites as biological and historical resources in the Gulf of Mexico: the effects of crude oil and dispersant on the biodiversity and corrosion potential of shipwreck bacterial biofilms

Science.gov (United States)

Salerno, J. L.; Little, B.; Lee, J.; Ray, R.; Hamdan, L. J.

2016-02-01

There are more than 2,000 documented shipwrecks in the Gulf of Mexico. Historic shipwrecks are invaluable cultural resources, but also serve as artificial reefs, enhancing biodiversity in the deep sea. Oil and gas-related activities have the potential to impact shipwreck sites. An estimated 30% of the oil from the Deepwater Horizon spill was deposited in the deep-sea, in areas that contain shipwrecks. We conducted field and laboratory experiments to determine if crude oil, dispersed oil, and/or dispersant affect the community composition, metabolic function, and/or corrosion potential of microorganisms inhabiting shipwrecks. Platforms containing carbon steel coupons (CSC) (n = 34 per platform) were placed at impacted and non-impacted shipwrecks or into four experimental microcosm tanks. After a 2-week acclimation period, tanks were treated with crude oil and/or dispersant or received no treatment. CSC and seawater (SW) samples for bacterial genetic analysis were collected bi-weekly (at 16 wks for field samples). Proteobacteria dominated field and lab CSC bacterial communities (77-97% of sequences). Field CSC bacterial communities differed at each wreck site (P = 0.001), with oil-impacted sites differing from control sites. Lab CSC bacterial communities differed between all treatment groups (P = 0.005) and changed over the course of the experiment (P = 0.001). CSC bacterial species richness, diversity, and dominance increased with time across all treatments indicating the recruitment and establishment of microbial biofilms on CSCs. SW bacterial communities differed between treatment groups (P = 0.001), with the dispersant treatment being most dissimilar from all other treatments (P < 0.01), and changed over time (P = 0.001). Oil- and oil/dispersant-treated CSCs exhibited higher corrosion compared to dispersant and control treatments. These findings indicate that exposure to oil and/or dispersant may alter bacterial community composition and corrosion potential.

Effect of asphaltenes on crude oil wax crystallization

DEFF Research Database (Denmark)

Kriz, Pavel; Andersen, Simon Ivar

2005-01-01

The paper summarizes the experimental work done on asphaltene influenced wax crystallization. Three different asphaltenes (from stable oil, instable oil, and deposit) were mixed at several concentrations or dispersions into the waxy crude oil. These blends were evaluated by viscometry and yield s...

Contributions of chemical exchange to T1ρ dispersion in a tissue model.

Science.gov (United States)

Cobb, Jared G; Xie, Jingping; Gore, John C

2011-12-01

Variations in T(1ρ) with locking-field strength (T(1ρ) dispersion) may be used to estimate proton exchange rates. We developed a novel approach utilizing the second derivative of the dispersion curve to measure exchange in a model system of cross-linked polyacrylamide gels. These gels were varied in relative composition of comonomers, increasing stiffness, and in pH, modifying exchange rates. Magnetic resonance images were recorded with a spin-locking sequence as described by Sepponen et al. These measurements were fit to a mono-exponential decay function yielding values for T(1ρ) at each locking-field measured. These values were then fit to a model by Chopra et al. for estimating exchange rates. For low stiffness gels, the calculated exchange values increased by a factor of 4 as pH increased, consistent with chemical exchange being the dominant contributor to T(1ρ) dispersion. Interestingly, calculated chemical exchange rates also increased with stiffness, likely due to modified side-chain exchange kinetics as the composition varied. This article demonstrates a new method to assess the structural and chemical effects on T(1ρ) relaxation dispersion with a suitable model. These phenomena may be exploited in an imaging context to emphasize the presence of nuclei of specific exchange rates, rather than chemical shifts. Copyright © 2011 Wiley Periodicals, Inc.

Treatment of paraffin problems in petroleum production with chemicals; Tratamento de problemas parafinicos com agentes quimicos na producao de petroleo

Energy Technology Data Exchange (ETDEWEB)

Jennings, David; Yin, Ralph; Weispfennig, Klaus; Newberry, Mike [Baker Petrolite, Sugar Land, TX (United States)

2004-07-01

Paraffin problems can greatly reduce production of certain crude oils, if correct methods to control the problems are not used. These problems are primarily related to flow line deposition and reduction in crude oil flow properties caused by wax network growth. Deep water production and production of high-wax content crude oils can be especially problematic. Much of the petroleum production in Brazil falls in these categories: in the Campos Basin and in Bahia. Paraffin problems can be controlled with diverse methods. These methods include use of: pigging, insulation, heating, and chemicals. Sometimes, the use of chemicals can be very practical, alone or in combination with other methods. This paper discusses the use of chemicals for the treatment of paraffin problems. Three types of treatments are discussed: prevention of deposition in flow lines with paraffin inhibitors; improvement in flow properties of crude oils with pour point depressants, and removal of paraffin deposits with dispersants. The discussion includes the physical effects of the treatment chemicals and field examples. (author)

Physico-chemical characteristics and nutraceutical distribution of crude palm oil and its fractions

Directory of Open Access Journals (Sweden)

Prasanth Kumar, P. K.

2014-06-01

Full Text Available Crude palm oil (CRPO was dry fractionated at 25 °C to get crude palm olein (CRPOL, 77% and crude palm stearin (CRPS, 23%. Low and high melting crude palm stearin (LMCRPS 14.3% and HMCRPS 8.7% were separated by further fractionation of CRPS with acetone. The physico-chemical parameters and nutraceutical distribution showed variation in different fractions. The CRPO contained 514.7 mg·Kg−1 of β-carotene and 82.6%, 16.1%, 12.5% and 3.1% of it was distributed in CRPOL, CRPS, LMCRPS and HMCRPS respectively. The distribution of phytosterols in fraction was 1870.2, 1996.8, 1190.9, 1290.4 and 115.4 mg·Kg−1 for CRPO, CRPOL, CRPS, LMCRPS and HMCRPS respectively. Total tocopherol composition was 535.5, 587.1, 308.0, 305.6 and 36.2 mg·Kg−1 for CRPO, CRPOL, CRPS, LMCRPS and HMCRPS respectively. The results show that the fractionation of CRPO may be helpful in the preparation of nutraceutical-rich fractions.Aceite de palma crudo (CRPO fue fraccionado en seco a 25 °C para obtener oleína de palma cruda (CRPOL, 77% y estearinas de palma cruda (CRPS, el 23%. Estearinas con bajo y alto punto de fusión (LMCRPS 14,3% y HMCRPS 8,7% se separan por fraccionamiento adicional de CRPS con acetona. Los parámetros físico- químicos y la distribución de nutracéuticos muestra diferencias entre las fracciones. El CRPO contenía 514,7 mg·Kg−1 de β-caroteno y el 82,6%, 16,1%, 12,5% y 3,1% de este se distribuye en CRPOL, CRPS, LMCRPS y HMCRPS respectivamente. Los fitosteroles en las fracciones fue de: 1870,2, 1996,8, 1190.9, 1290,4 y 115,4 mg·Kg−1 para CRPO, CRPOL, CRPS, LMCRPS y HMCRPS respectivamente. La composición total de tocoferol fue 535,5, 587,1 308,0, 305,6 y 36,2 mg·Kg−1, para CRPO, CRPOL, CRPS, LMCRPS y HMCRPS respectivamente. Los resultados mostraron que el fraccionamiento de CRPO puede ser útil en la preparación de fracciones ricas en nutracéuticos.

Chemically dispersed oil is cytotoxic and genotoxic to sperm whale skin cells.

Science.gov (United States)

Wise, Catherine F; Wise, James T F; Wise, Sandra S; Wise, John Pierce

2018-06-01

Two major oil crises in United States history, the 1989 Exxon-Valdez oil spill in Alaska and the 2010 Deepwater Horizon Oil Rig explosion in the Gulf of Mexico, drew attention to the need for toxicological experiments on oil and chemically dispersed oil. We are still learning the effects these spills had on wildlife. However, little data is known about the toxicity of these substances in marine mammals. The objective of this study is to determine the toxicity of Alaskan oil, as well as chemically dispersed oil. Oil experiments were performed using the water accommodated fraction of Alaskan oil (WAF) and the chemically enhanced water accommodated fraction of Alaskan oil (CEWAF). The Alaskan WAF is not cytotoxic to sperm whale skin cells though it did induce chromosome damage; S9-mediated metabolism did not affect the cytotoxicity of WAF but did increase the levels of chromosome damage. Alaskan CEWAF is more cytotoxic and genotoxic than the WAF; S9 mediated metabolism increased both cytotoxicity and genotoxicity of CEWAF. Analysis of the PAH content of Alaskan WAF and CEWAF revealed a forty-fold increase in the total levels of PAHs in CEWAF compared to WAF. These findings show that chemically dispersed oil leads to higher levels of PAH exposure which are more toxic and likely to lead to longer and more persistent health effects. Copyright © 2017 Elsevier Inc. All rights reserved.

Chemical composition dispersion in bi-metallic nanoparticles: semi-automated analysis using HAADF-STEM

International Nuclear Information System (INIS)

Epicier, T.; Sato, K.; Tournus, F.; Konno, T.

2012-01-01

We present a method using high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) to determine the chemical composition of bi-metallic nanoparticles. This method, which can be applied in a semi-automated way, allows large scale analysis with a statistical number of particles (several hundreds) in a short time. Once a calibration curve has been obtained, e.g., using energy-dispersive X-ray spectroscopy (EDX) measurements on a few particles, the HAADF integrated intensity of each particle can indeed be directly related to its chemical composition. After a theoretical description, this approach is applied to the case of iron–palladium nanoparticles (expected to be nearly stoichiometric) with a mean size of 8.3 nm. It will be shown that an accurate chemical composition histogram is obtained, i.e., the Fe content has been determined to be 49.0 at.% with a dispersion of 10.4 %. HAADF-STEM analysis represents a powerful alternative to fastidious single particle EDX measurements, for the compositional dispersion in alloy nanoparticles.

Ophthalmic effects of petroleum dispersant exposure on common murres (Uria aalge): An experimental study.

Science.gov (United States)

Fiorello, Christine V; Freeman, Kate; Elias, Becky A; Whitmer, Emily; Ziccardi, Michael H

2016-12-15

The safety of chemical dispersants used during oil spill responses is largely unknown in birds. We captured common murres in Monterey Bay, CA and exposed them to Corexit EC9500a, crude oil, or a combination in artificial seawater. We performed ophthalmic examinations and measured intraocular pressures and tear production before and after exposure. Loglinear analysis found that exposure to oil or dispersant was related to the development of conjunctivitis and corneal ulcers. Odds ratios for birds exposed to oil or dispersant were positive and significant for the development of conjunctivitis, while odds ratios for the development of corneal ulcers were positive and significant only for birds exposed to a high concentration of oil. Ocular exposure to dispersants and petroleum in seabirds may cause conjunctivitis and may play a role in the development of corneal ulcers. These results have implications for policymakers who develop protocols for the use of dispersants during marine oil spills. Copyright © 2016 Elsevier Ltd. All rights reserved.

Procedures in field systems for collecting and demulsifying crude oils

Energy Technology Data Exchange (ETDEWEB)

Vakhitov, G G; Graifer, V I; Tronov, V P; Zakirov, I G

1969-01-01

This microscopic study of crude oil emulsification and demulsification showed that the sooner an emulsion is chemically treated, the less its stability. This finding led to the practice of adding demulsifiers to the crude oil in pipelines. This method of demulsification is now used in Romashkino, Bablinsk, and Elkhovs fields. By this early addition of a chemical, the tendency of the pipeline to form stable, highly viscous emulsions is reduced. This treatment also facilitates separation of water from oil in storage tanks. Repeated tests have shown that pipeline demulsification is a highly effective and economic process. This method reduces crude oil dewatering costs by several hundred percent.

Treatment of oil spill fire hazards with chemical dispersants: a case history

Energy Technology Data Exchange (ETDEWEB)

Kaufmann, S.

1982-10-01

Federal contingency plans include the use of chemical dispersants to ameliorate hazardous situations caused by spills of flammable or explosive petroleum products. The closing of the Williamsburg Bridge in New York City, when a gasoline tanker exploded and sank under it, was nearly overshadowed by the leakage of 7 750 000 L (2 000 000 gal) of gasoline from a storage facility in Boston. The threat to a densely populated neighborhood of six-family tenement houses and a large racetrack that stabled hundreds of Thoroughbred horses led to the use of a chemical dispersant to neutralize the fire hazard. Favorable results by fire departments in recent years, as a result of training, have established dispersants as the method of choice to handle nonburning spill incidents. Even though the teams that responded to several such emergencies of course held the protection of life and property as paramount, no toxicological environmental effects were noted during subsequent observations.

Bacterial consortia for crude oil spill remediation

International Nuclear Information System (INIS)

Chhatre, S.; Purohit, H.; Shanker, R.; Khanna, P.

1996-01-01

Oil spills generate enormous public concern and highlight the need for cost effective ad environmentally acceptable mitigation technologies. Physico-chemical methods are not completely effective after a spill. Hence, there is a need for improved and alternative technologies. Bioremediation is the most environmentally sound technology for clean up. This report intends to determine the potential of a bacterial consortium for degradation of Gulf and Bombay High crude oil. A four membered consortium was designed that could degrade 70% of the crude oil. A member of consortium produced a biosurfactant, rhamnolipid, that emulsified crude oil efficiently for effective degradation by the other members of consortium. The wide range of hydrocarbonoclastic capabilities of the selected members of bacterial consortium leads to the degradation of both aromatic and aliphatic fractions of crude oil in 72 hours. (Author)

Biodegradation of dispersed Macondo crude oil by indigenous Gulf of Mexico microbial communities

Energy Technology Data Exchange (ETDEWEB)

Wang, Jian; Sandoval, Kathia; Ding, Yan [Southeaest Environmental Research Center, Florida International University, North Miami Beach, FL 33181 (United States); Stoeckel, Donald; Minard-Smith, Angela [Battelle 505 King Ave, Columbus, OH 43201 (United States); Andersen, Gary; Dubinsky, Eric A. [Earth Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Atlas, Ronald [Department of Biology, University of Louisville, Louisville, KY 40292 (United States); Gardinali, Piero, E-mail: gardinal@fiu.edu [Southeaest Environmental Research Center, Florida International University, North Miami Beach, FL 33181 (United States); Department of Chemistry & Biochemistry, Florida International University, Miami, FL 33199 (United States)

2016-07-01

Because of the extreme conditions of the Deepwater Horizon (DWH) release (turbulent flow at 1500 m depth and 5 °C water temperature) and the sub-surface application of dispersant, small but neutrally buoyant oil droplets < 70 μm were formed, remained in the water column and were subjected to in-situ biodegradation processes. In order to investigate the biodegradation of Macondo oil components during the release, we designed and performed an experiment to evaluate the interactions of the indigenous microbial communities present in the deep waters of the Gulf of Mexico (GOM) with oil droplets of two representative sizes (10 μm and 30 μm median volume diameter) created with Macondo source oil in the presence of Corexit 9500 using natural seawater collected at the depth of 1100–1300 m in the vicinity of the DWH wellhead. The evolution of the oil was followed in the dark and at 5 °C for 64 days by collecting sacrificial water samples at fixed intervals and analyzing them for a wide range of chemical and biological parameters including volatile components, saturated and aromatic hydrocarbons, dispersant markers, dissolved oxygen, nutrients, microbial cell counts and microbial population dynamics. A one phase exponential decay from a plateau model was used to calculate degradation rates and lag times for more than 150 individual oil components. Calculations were normalized to a conserved petroleum biomarker (30αβ-hopane). Half-lives ranged from about 3 days for easily degradable compounds to about 60 days for higher molecular weight aromatics. Rapid degradation was observed for BTEX, 2–3 ring PAHs, and n-alkanes below n-C23. The results in this experimental study showed good agreement with the n-alkane (n-C13 to n-C26) half-lives (0.6–9.5 days) previously reported for the Deepwater Horizon plume samples and other laboratory studies with chemically dispersed Macondo oil conducted at low temperatures (< 8 °C). The responses of the microbial populations also

Comparative toxicology of four crude oils

Energy Technology Data Exchange (ETDEWEB)

Clarke, L.M.; Hodson, P.V. [Queen' s Univ., Kingston, ON (Canada). Dept. of Biology; Brown, R.S. [Queen' s Univ., Kingston, ON (Canada). Dept. of Chemistry

2003-07-01

Fish that are chronically exposed to polycyclic aromatic hydrocarbons (PAHs) exhibit dioxin-like toxicity characterized by blue sac disease and the induction of cytochrome P4501A (CYP1A). This study compared the relative toxicity of four crude oils (Scotian Shelf, MESA, the synthetic Alberta Sweet Mixed Blend, and Alaskan North Slope Crude Oil), in causing the disease in rainbow trout embryos living in simulated spawning beds with hydrocarbon-contaminated gravel. Each oil had different chemical characteristics and PAH concentrations. The study confirmed the assumption that the Alberta Sweet Mixed Blend would be the most toxic due to its high PAH concentration. The results suggest that the main cause of toxicity in crude oil is due to the presence, concentration, and conformation of specific PAHs.

Noncatalytic transformation of the crude lipid of ChlorellaI vulgaris into fatty acid methyl ester (FAME) with charcoal via a thermo-chemical process.

Science.gov (United States)

Kwon, Eilhann E; Jeon, Young Jae; Yi, Haakrho

2013-02-01

The noncatalytic transformation of the crude lipid of Chlorella vulgaris (C. vulgaris) into fatty acid methyl ester (FAME) via a thermo-chemical process was mainly investigated in this work. The crude lipid of C. vulgaris was recovered by means of solvent extraction from C. vulgaris cultivated in a raceway pond. The conventional catalyzed transesterification of crude lipid of C. vulgaris is notably inhibited by the impurities contained in the crude lipid of C. vulgaris. These impurities are inevitably derived from the solvent extraction process for C. vulgaris. However, this work presents the noncatalytic transesterification of microalgal lipid into FAME, which could be an alternative option. For example, the noncatalytic transformation of microalgal lipid into FAME provides evidence that the esterification of free fatty acids (FFAs) and the transesterification of triglycerides can be combined into a single step less susceptible to the impurities and with a high conversion efficiency (∼97%). Copyright © 2012 Elsevier Ltd. All rights reserved.

Facile Synthesis of Mono-Dispersed Polystyrene (PS/Ag Composite Microspheres via Modified Chemical Reduction

Directory of Open Access Journals (Sweden)

Wen Zhu

2013-12-01

Full Text Available A modified method based on in situ chemical reduction was developed to prepare mono-dispersed polystyrene/silver (PS/Ag composite microspheres. In this approach; mono-dispersed PS microspheres were synthesized through dispersion polymerization using poly-vinylpyrrolidone (PVP as a dispersant at first. Then, poly-dopamine (PDA was fabricated to functionally modify the surfaces of PS microspheres. With the addition of [Ag(NH32]+ to the PS dispersion, [Ag(NH32]+ complex ions were absorbed and reduced to silver nanoparticles on the surfaces of PS-PDA microspheres to form PS/Ag composite microspheres. PVP acted both as a solvent of the metallic precursor and as a reducing agent. PDA also acted both as a chemical protocol to immobilize the silver nanoparticles at the PS surface and as a reducing agent. Therefore, no additional reducing agents were needed. The resulting composite microspheres were characterized by TEM, field emission scanning electron microscopy (FESEM, energy-dispersive X-ray spectroscopy (EDS, XRD, UV-Vis and surface-enhanced Raman spectroscopy (SERS. The results showed that Ag nanoparticles (NPs were homogeneously immobilized onto the PS microspheres’ surface in the presence of PDA and PVP. PS/Ag composite microspheres were well formed with a uniform and compact shell layer and were adjustable in terms of their optical property.

Chemical and phase composition of powders obtained by electroerosion dispersion from alloys WC-Co

International Nuclear Information System (INIS)

Putintseva, M.N.

2004-01-01

A consideration is given to the dependence of chemical and phase compositions of dispersed powders on the conditions, the medium of electroerosion dispersing and the content of cobalt in an initial alloy. It is shown that dissociation of carbon from tungsten carbide proceeds even on dispersing in liquid hydrocarbon-containing media (kerosene and machine oil). The phase composition is determined to a large extent by a medium of dispersing and a cobalt content in the initial alloy. In all powders complex tungsten-cobalt carbides and even Co 7 W 6 intermetallic compounds are found [ru

Chemical and Phase Composition of Powders Obtained by Electroerosion Dispersion from WC - Co Alloys

Science.gov (United States)

Putintseva, M. N.

2004-03-01

The dependence of the chemical and phase composition of dispersed powders on the mode and medium of electroerosion dispersion and the content of cobalt in the initial alloy is considered. It is shown that the dissociation of carbon from tungsten carbide occurs even in dispersion in liquid hydrocarbon-bearing media (kerosene and industrial oils). The phase composition is primarily determined by the dispersion medium and the content of cobalt in the initial alloy. Compound tungsten-cobalt carbides and even a Co7W6 intermetallic are determined in all the powders.

Co-processing potential of HTL bio-crude at petroleum refineries

DEFF Research Database (Denmark)

Hoffmann, Jessica; Jensen, Claus Uhrenholt; Rosendahl, Lasse Aistrup

2016-01-01

assays, adapted from conventional crude oil assays, have been obtained, including fractionation of the bio-crude through 15:5 vacuum distillation. The bio-crude and its fractions have been analyzed with respect to heating value, elemental composition, density and oxygen-containing functional groups....... Results show a highly promising bio-crude quality, with a higher heating value of 40.4 MJ/kg, elemental oxygen content of 5.3 wt.%, a specific gravity of 0.97 and a distillation recovery of ∼53.4 wt.% at an atmospheric equivalent temperature (AET) of 375 °C, . Results show that only minor upgrading......This study presents detailed chemical and thermophysical analysis of bio-crude from a continuous hydrothermal liquefaction research plant. Current research on bio-crude focuses mainly on specific biomass feedstocks and conversion process conditions and resulting yields rather than on bio-crude...

Dispersion of carbon nanotubes in hydroxyapatite powder by in situ chemical vapor deposition

International Nuclear Information System (INIS)

Li Haipeng; Wang Lihui; Liang, Chunyong; Wang Zhifeng; Zhao Weimin

2010-01-01

In the present work, we use chemical vapor deposition of methane to disperse carbon nanotubes (CNTs) within hydroxyapatite (HA) powder. The effect of different catalytic metal particles (Fe, Ni or Co) on the morphological and structural development of the powder and dispersion of CNTs in HA powder was investigated. The results show that the technique is effective in dispersing the nanotubes within HA powder, which simultaneously protects the nanotubes from damage. The results can have important and promising speculations for the processing of CNT-reinforced HA-matrix composites in general.

Detection of DNA damage in mussels and sea urchins exposed to crude oil using comet assay

International Nuclear Information System (INIS)

Taban, I.C.; Bechmann, R.K.; Torgrimsen, S.; Baussant, T.; Sanni, S.

2004-01-01

The single-cell microgel electrophoresis assay or the comet assay was used to evaluate DNA damage of dispersed crude oil on sea urchins (Strongylocentrotus droebachiensis) and mussels (Mytilus edulis L.). Sea urchins were exposed to 0.06 and 0.25 mg/L dispersed crude oil in a continuous flow system, while the mussels were exposed to 0.015, 0.06 and 0.25 mg/L dispersed crude oil. Sea urchin coelomocytes and mussel haemocytes were sampled after 4 and 5 weeks exposure, respectively. In the sea urchin coelomocytes, there was a significant concentration-related increase in the percentage of DNA in comet tail. In mussel haemocytes, there was a significantly higher percentage of DNA in comet tail for all treatments compared to the control. The responses were concentration-related up to 0.06 mg/L oil. The two highest exposure concentrations of mussels were not significantly different from each other. These results indicate that the comet assay can be used for biomonitoring of DNA damage in marine invertebrates following oil contamination. (author)

Heavy crude oil and synthetic crude market outlook

International Nuclear Information System (INIS)

Crandall, G.R.

1997-01-01

This presentation included an outline of the international heavy crude supply and demand versus Canadian heavy crude supply and disposition, and pricing outlook for synthetic crudes. Differences among crude oils such as light sweet, light sour, heavy and bitumen were described and illustrated with respect to their gravity, API, percentage of sulphur, metals and nitrogen. Internationally, heavy and sour crude supplies are forecast to increase significantly over the next four years. Discoveries of light sour crude in offshore Gulf of Mexico will provide a major new source of sour crude to U.S. Gulf Coast refineries. Venezuela's supplies of heavy and sour crude are also expected to increase over the next few years. Mexico and Canada have plans to increase their heavy crude production. All of the crudes will be aimed at the U.S. Gulf Coast and Midwest markets. Pentanes and condensates are also expected to increase based on the growing Canadian natural gas production. Diluent demand will also grow to match Canadian heavy crude/bitumen production. U.S. midwest refiners are proposing expansions to allow them to process more Canadian heavy crude oil. At present, only a few refineries are equipped to process significant amounts of synthetic crude. It was suggested that to absorb available heavy and synthetic production, increased penetration into both Canadian and U.S. markets will be required. Some refineries may have to be modified to process heavy and synthetic oil supplies. Heavy oil and synthetic producers may need to develop relationships with refiners such as joint ventures and term supply agreements to secure markets. 2 tabs., 12 figs

Impact of Crude-Oil Spillage Pollution and Chemical Remediation ...

African Journals Online (AJOL)

Michael Horsfall

significantly (p≤0.01) higher than the level of degradation, except in infiltration rate. Soil pH increased by 26% .... volumes of water were added into the containers on day six. As the days ... crude oil spillage reduced soil moisture availability or.

Influence of dispersants on petroleum bioavailability in a marine food chain

International Nuclear Information System (INIS)

Wolfe, M.F.; Younghans-Haug, C.O.; Tjeerdema, R.S.; Sowby, M.L.

1994-01-01

Oil spills represent a serious threat to marine organisms. Crude oil consists of numerous compounds with a wide range of physicochemical properties critical in determining those organisms at greatest risk. Surface inhabitants may benefit from the application of dispersing agents, yet little is understood of the disposition of the dispersed components of a spill. As the functional water solubility of petroleum hydrocarbons increases in the water column, the portion that is available for uptake may also increase, placing another group of organisms at risk. Potential increases in adsorption and bioaccumulation may extend the threat of oil spills from marine organisms to human consumers. Studies to date have focused on the acute toxicity of oil and dispersants. The objective of this research was to determine the influence of a dispersant on the bioavailability of crude oil components at concentrations below the no observable effect level (NOEL). Flow-through chambers were used to expose the algae, Isochrysis galbana, to ''undispersed'' Prudhoe Bay Crude Oil (PBCO) spiked with 14 C naphthalene and ''dispersed'' spiked PBCO/Corexit 9527 sea water preparations. Bioavailability to Isochrysis was assessed as uptake, bioconcentration, and deputation of 14 C naphthalene and its metabolites. Results of exposure studies will be presented

Influence of physical and chemical dispersion on the biodegradation of oil under simulated marine conditions

International Nuclear Information System (INIS)

Swannell, R. P. J.; Daniel, F.; Croft, B. C.; Engelhardt, M. A.; Wilson, S.; Mitchell, D. J.; Lunel, T.

1997-01-01

Dispersion and biodegradation of oil was studied in marine microcosms designed to simulate oil dispersion at sea. Dispersion was studied using both Phase Doppler Particle Analyser and a Chamber Slide technique. In both natural and artificial seawater, oil addition was observed to encourage the growth of hydrocarbon-degrading bacteria in the presence of sufficient nitrogen and phosphorus. Results showed that microorganisms enhanced oil dispersion by colonizing physically-dispersed oil droplets and preventing re-coalescence with the surface slick. The addition of dispersants increased the rate of colonization as well as the number of degraded droplets. These results suggest that stimulation of physical dispersion by chemical means increase the rate of oil biodegradation under natural conditions. 25 refs., 3 tabs., 14 figs

Large Scale Behavior and Droplet Size Distributions in Crude Oil Jets and Plumes

Science.gov (United States)

Katz, Joseph; Murphy, David; Morra, David

2013-11-01

The 2010 Deepwater Horizon blowout introduced several million barrels of crude oil into the Gulf of Mexico. Injected initially as a turbulent jet containing crude oil and gas, the spill caused formation of a subsurface plume stretching for tens of miles. The behavior of such buoyant multiphase plumes depends on several factors, such as the oil droplet and bubble size distributions, current speed, and ambient stratification. While large droplets quickly rise to the surface, fine ones together with entrained seawater form intrusion layers. Many elements of the physics of droplet formation by an immiscible turbulent jet and their resulting size distribution have not been elucidated, but are known to be significantly influenced by the addition of dispersants, which vary the Weber Number by orders of magnitude. We present experimental high speed visualizations of turbulent jets of sweet petroleum crude oil (MC 252) premixed with Corexit 9500A dispersant at various dispersant to oil ratios. Observations were conducted in a 0.9 m × 0.9 m × 2.5 m towing tank, where large-scale behavior of the jet, both stationary and towed at various speeds to simulate cross-flow, have been recorded at high speed. Preliminary data on oil droplet size and spatial distributions were also measured using a videoscope and pulsed light sheet. Sponsored by Gulf of Mexico Research Initiative (GoMRI).

Sustainable production of hydrogen and chemical commodities from biodiesel waste crude glycerol and cellulose by biological and catalytic processes

OpenAIRE

Maru, Biniam Taddele

2013-01-01

Hydrogen has a significant potential as clean and ‘green’ fuel of the future. Accordingly, this thesis investigated how to generate a sustainable production of hydrogen and other chemical commodities through study of: 1) Fermentative behavior of anaerobichydrogen producing microorganisms from pure glycerol and biodiesel waste crude glycerol; 2) The advantage of using a solid supportimmobilisationof microorganisms 3) The integration of the dark fermentative system with the catalytic hydrolysi...

Meat quality of suckling lambs supplemented with contents of crude glycerin in creep feeding

Directory of Open Access Journals (Sweden)

Ana Carolina Ribeiro Sanquetta de Pellegrin

2014-10-01

Full Text Available The objective of this research was to evaluate the effect of crude glycerin in the supplement provided in creep feeding on the physico-chemical and sensory characteristics of meat from suckling lambs kept in pasture ryegrass. Thirty two suckling lambs, sixteen male and sixteen female, were distributed into 4 diets with different concentrations of crude glycerin: 0, 10, 20 and 30% crude glycerin, in the replacement of corn, in the isoproteic supplement (18% CP provided daily in amounts equivalent to 2% of body weight. The experimental design was randomized blocks, with each variable data submitted to analysis of variance at 5% significance and the significant results subjected to regression analysis. There was no effect (P>0,05 of contents of crude glycerin on the chemical composition and cholesterol content of lamb meat. On the other hand, there was increased linearly (P>0,05 pH and cooking losses by the use of crude glycerin. No influence (P>0,05 of crude glycerin concentration on the texture profile analysis (TPA, sensorial analysis by triangular test and even when was evaluated attributes color, tenderness and juiciness of lamb meat. Up to 30% of crude glycerin in the supplement provided in creep feeding for suckling lambs grazing ryegrass do not compromise the physical-chemical and sensorial quality of the lamb meat.

CFD modeling of fouling in crude oil pre-heaters

International Nuclear Information System (INIS)

Bayat, Mahmoud; Aminian, Javad; Bazmi, Mansour; Shahhosseini, Shahrokh; Sharifi, Khashayar

2012-01-01

Highlights: ► A conceptual CFD-based model to predict fouling in industrial crude oil pre-heaters. ► Tracing fouling formation in the induction and developing continuation periods. ► Effect of chemical components, shell-side HTC and turbulent flow on the fouling rate. - Abstract: In this study, a conceptual procedure based on the computational fluid dynamic (CFD) technique has been developed to predict fouling rate in an industrial crude oil pre-heater. According to the developed CFD concept crude oil was assumed to be composed of three pseudo-components comprising of petroleum, asphaltene and salt. The binary diffusion coefficients were appropriately categorized into five different groups. The species transport model was applied to simulate the mixing and transport of chemical species. The possibility of adherence of reaction products to the wall was taken into account by applying a high viscosity for the products in competition with the shear stress on the wall. Results showed a reasonable agreement between the model predictions and the plant data. The CFD model could be applied to new operating conditions to investigate the details of the crude oil fouling in the industrial pre-heaters.

Both solubility and chemical stability of curcumin are enhanced by solid dispersion in cellulose derivative matrices.

Science.gov (United States)

Li, Bin; Konecke, Stephanie; Wegiel, Lindsay A; Taylor, Lynne S; Edgar, Kevin J

2013-10-15

Amorphous solid dispersions (ASD) of curcumin (Cur) in cellulose derivative matrices, hydroxypropylmethylcellulose acetate succinate (HPMCAS), carboxymethylcellulose acetate butyrate (CMCAB), and cellulose acetate adipate propionate (CAAdP) were prepared in order to investigate the structure-property relationship and identify polymer properties necessary to effectively increase Cur aqueous solution concentration. XRD results indicated that all investigated solid dispersions were amorphous, even at a 9:1 Cur:polymer ratio. Both stability against crystallization and Cur solution concentration from these ASDs were significantly higher than those from physical mixtures and crystalline Cur. Remarkably, curcumin was also stabilized against chemical degradation in solution. Chemical stabilization was polymer-dependent, with stabilization in CAAdP>CMCAB>HPMCAS>PVP, while matrices enhanced solution concentration as PVP>HPMCAS>CMCAB≈CAAdP. HPMCAS/Cur dispersions have useful combinations of pH-triggered release profile, chemical stabilization, and strong enhancement of Cur solution concentration. Copyright © 2013 Elsevier Ltd. All rights reserved.

CHEMICAL OIL SPILL DISPERSANTS: UPDATE STATE-OF-THE- ART ON MECHANISM OF ACTION AND LABORATORY TESTING FOR PERFORMANCE

Science.gov (United States)

Chemical dispersants are formulations designed to facilitate dispersion of an oil slick into small droplets that disperse to non-problematic concentrations in an underlying water column. This project had two primary objectives: (1) update information on mechanisms of action of ...

Evaluation of three oil spill laboratory dispersant effectiveness tests

International Nuclear Information System (INIS)

Sullivan, D.; Farlow, J.; Sahatjian, K.A.

1993-01-01

Chemical dispersants can be used to reduce the interfacial tension of floating oil slicks so that the oils disperse more rapidly into the water column and thus pose less of a threat to shorelines, birds, and marine mammals. The laboratory test currently specified in federal regulations to measure dispersant effectiveness is not especially easy or inexpensive, and generates a rather large quantity of oily waste water. This paper describes the results of an effort by the EPA to identify a more suitable laboratory dispersant effectiveness test. EPA evaluated three laboratory methods: the Revised Standard Dispersant Effectiveness Test currently used (and required by regulation) in the United States, the swirling flask test (developed by Environment Canada), and the IFP-dilution test (used in france and other European countries). Six test oils and three dispersants were evaluated; dispersants were applied to the oil at an average 1:10 ratio (dispersant to oil) for each of the three laboratory methods. Screening efforts were used to focus on the most appropriate oil/dispersant combination for detailed study. A screening criterion was established that required a combination that gave at least 20% effectiveness results. The selected combination turned out to be Prudhoe Bay crude oil and the dispersant Corexit 9527. This combination was also most likely to be encountered in US coastal waters. The EPA evaluation concluded that the three tests gave similar precision results, but that the swirling flask test was fastest, cheapest, simplest, and required least operator skill. Further, EPA is considering conducting the dispersant effectiveness test itself, rather than having data submitted by a dispersant manufacturer, and establishing an acceptability criterion (45% efficiency) which would have to be met before a dispersant could be placed on the Product Schedule of the National Contingency Plan (NCP)

Effects of selected thermophilic microorganisms on crude oils at elevated temperatures and pressures. Final report

Energy Technology Data Exchange (ETDEWEB)

Premuzic, E.T.; Lin, M.S.

1995-07-01

During the past several years, a considerable amount of work has been carried out showing that microbially enhanced oil recovery (MEOR) is promising and the resulting biotechnology may be deliverable. At the Brookhaven National Laboratory (BNL), systematic studies have been conducted which dealt with the effects of thermophilic and thermoadapted bacteria on the chemical and physical properties of selected types of crude oils at elevated temperatures and pressures. Particular attention was paid to heavy crude oils from Venezuela, California, Alabama, Arkansas, Wyoming, Alaska, and other oil producing areas. Current studies indicate that during the biotreatment several chemical and physical properties of crude oils are affected. The oils are (1) emulsified; (2) acidified; (3) there is a qualitative and quantitative change in light and heavy fractions of the crudes; (4) there are chemical changes in fractions containing sulfur compounds; (5) there is an apparent reduction in the concentration of trace metals; (6) the qualitative and quantitative changes appear to be microbial species dependent; and (7) there is a distinction between {open_quotes}biodegraded{close_quotes} and {open_quotes}biotreated{close_quotes} oils. Preliminary results indicate the introduced microorganisms may become the dominant species in the bioconversion of oils. These studies also indicate the biochemical interactions between crude oils and microorganisms follow distinct trends, characterized by a group of chemical markers. Core-flooding experiments have shown significant additional crude oil recoveries are achievable with thermophilic microorganisms at elevated temperatures similar to those found in oil reservoirs. In addition, the biochemical treatment of crude oils has technological applications in downstream processing of crude oils such as in upgrading of low grade oils and the production of hydrocarbon based detergents.

Toxicity of crude oil to early life stages of two fish species

Energy Technology Data Exchange (ETDEWEB)

Clarke, L.M.; Hodson, P.V. [Queen' s Univ., Kingston, ON (Canada). Dept. of Biology; Brown, R.S. [Queen' s Univ., Kingston, ON (Canada). Dept. of Chemistry; King, T.; Lee, K. [Department of Fisheries and Oceans, Dartmouth, NS (Canada). Bedford Inst. of Oceanography

2004-07-01

Fish exposed to crude oil in their early life stages exhibit signs of dioxin-like toxicity which is linked to the presence of alkyl-substituted polycyclic aromatic hydrocarbons (PAHs). Exposure is characterized by the presence of blue-sac disease which manifests itself in edema, hemorrhaging, deformities and induction of CYP1A enzymes. In this study, the extent of CYP1A induction and BSD was compared in the early life stages of rainbow trout and Japanese medaka following exposure to two crude oils (Scotian Shelf and Alaskan North Slope Crude). Embryos were exposed to a broad range of concentrations of chemically enhanced water fractions of both oils which have unique PAH composition and chemical characteristics. It was assumed that Alaskan North Slope Crude would be more toxic than Scotian Shelf because it has a higher PAH concentration. The occurrence and severity of BSD was characterized along with the extent of PAH exposure. Preliminary results confirm that PAH exposure is greater for Alaskan North Slope Crude and that the responses of the two fish species were highly correlated.

Malic acid production by chemically induced Aspergillus niger MTCC 281 mutant from crude glycerol.

Science.gov (United States)

Iyyappan, J; Bharathiraja, B; Baskar, G; Jayamuthunagai, J; Barathkumar, S; Anna Shiny, R

2018-03-01

In the present investigation, crude glycerol derived from transesterification process was utilized to produce the commercially-valuable malic acid. A combined resistant on methanol and malic acid strain of Aspergillus niger MTCC 281 mutant was generated in solid medium containing methanol (1-5%) and malic acid (40-80 g/L) by the adaptation process for 22 weeks. The ability of induced Aspergillus niger MTCC 281 mutant to utilize crude glycerol and pure glycerol to produce malic acid was studied. The yield of malic acid was increased with 4.45 folds compared with that of parent strain from crude glycerol. The highest concentration of malic acid from crude glycerol by using beneficial mutant was found to be 77.38 ± 0.51 g/L after 192 h at 25 °C. This present study specified that crude glycerol by-product from biodiesel production could be used for producing high amount of malic acid without any pretreatment. Copyright © 2017 Elsevier Ltd. All rights reserved.

A role for analytical chemistry in advancing our understanding of the occurrence, fate, and effects of Corexit Oil Dispersants

Science.gov (United States)

Place, Ben; Anderson, Brian; Mekebri, Abdou; Furlong, Edward T.; Gray, James L.; Tjeerdema, Ron; Field, Jennifer

2010-01-01

On April 24, 2010, the sinking of the Deepwater Horizon oil rig resulted in the release of oil into the Gulf of Mexico. As of July 19, 2010, the federal government's Deepwater Horizon Incident Joint Information Center estimates the cumulative range of oil released is 3,067,000 to 5,258,000 barrels, with a relief well to be completed in early August. By comparison, the Exxon Valdez oil spill released a total of 260,000 barrels of crude oil into the environment. As of June 9, BP has used over 1 million gallons of Corexit oil dispersants to solubilize oil and help prevent the development of a surface oil slick. Oil dispersants are mixtures containing solvents and surfactants that can exhibit toxicity toward aquatic life and may enhance the toxicity of components of weathered crude oil. Detailed knowledge of the composition of both Corexit formulations and other dispersants applied in the Gulf will facilitate comprehensive monitoring programs for determining the occurrence, fate, and biological effects of the dispersant chemicals. The lack of information on the potential impacts of oil dispersants has caught industry, federal, and state officials off guard. Until compositions of Corexit 9500 and 9527 were released by the U.S. Environmental Protection Agency online, the only information available consisted of Material Safety Data Sheets (MSDS), patent documentation, and a National Research Council report on oil dispersants. Several trade and common names are used for the components of the Corexits. For example, Tween 80 and Tween 85 are oligomeric mixtures.

Characterization of crude oils and petroleum products: (I Elution liquid chromatographic separation and gas chromatographic analysis of crude oils and petroleum products

Directory of Open Access Journals (Sweden)

E.O. Odebunmi

2002-12-01

Full Text Available Some physical and chemical properties of samples of light, medium and heavy Nigerian crude oils and petroleum products including gasoline, kerosene and engine oil have been measured and are reported in this paper. The crude oils and petroleum products have also been characterized by fractional distillation and elution liquid chromatography. The fractions obtained from elution liquid chromatography were analyzed using gas chromatography (GC. The GC fractions were identified by comparing the retention time of peaks in the unknown samples with those of components of calibration standard mixtures. The importance of the physico-chemical properties and the significance of the fractional distillation and chromatographic separation methods to industrial process operations have been discussed.

Modeling Dispersion of Chemical-Biological Agents in Three Dimensional Living Space

International Nuclear Information System (INIS)

William S. Winters

2002-01-01

This report documents a series of calculations designed to demonstrate Sandia's capability in modeling the dispersal of chemical and biological agents in complex three-dimensional spaces. The transport of particles representing biological agents is modeled in a single room and in several connected rooms. The influence of particle size, particle weight and injection method are studied

Dataset on experimental investigation of gum arabic coated alumina nanoparticles for enhanced recovery of nigerian medium crude oil.

Science.gov (United States)

Orodu, Oyinkepreye D; Orodu, Kale B; Afolabi, Richard O; Dafe, Eboh A

2018-08-01

The dataset in this article are related to an experimental Enhanced Oil Recovery (EOR) scheme involving the use of dispersions containing Gum Arabic coated Alumina Nanoparticles (GCNPs) for Nigerian medium crude oil. The result contained in the dataset showed a 7.18% (5 wt% GCNPs), 7.81% (5 wt% GCNPs), and 5.61% (3 wt% GCNPs) improvement in the recovery oil beyond the water flooding stage for core samples A, B, and C respectively. Also, the improvement in recovery of the medium crude oil by the GCNPs dispersions when compared to Gum Arabic polymer flooding was evident in the dataset.

Ethanol production from biodiesel-derived crude glycerol by newly isolated Kluyvera cryocrescens

Energy Technology Data Exchange (ETDEWEB)

Choi, Won Jae; Hartono, Maria Regina; Chan, Weng Heng; Yeo, Suan Siong [Agency for Science, Technology and Research (A*STAR), Jurong Island (Singapore). Inst. of Chemical and Engineering Sciences

2011-02-15

The rapidly expanding market for biodiesel has increased the supply and reduced the cost of glycerol, making it an attractive sustainable feed stock for the fuel and chemical industry. Glycerol-based biorefinery is the microbial fermentation of crude glycerol to produce fuels and chemicals. A major challenge is to obtain microbes tolerant to inhibitors such as salts and organic solvents present in crude glycerol. Microbial screening was attempted to isolate novel strain capable of growing on crude glycerol as a sole carbon source. The newly isolated bacteria, identified as nonpathogenic Kluyvera cryocrescens S26 could convert biodiesel-derived crude glycerol to ethanol with high yield and productivity. The supplementation of nutrients such as yeast extract resulted in distinguished enhancement in cell growth as well as ethanol productivity under anaerobic condition. When glycerol fermentation is performed under microaerobic condition, there is also a remarkable improvement in cell growth, ethanol productivity and yield, compared with those under strict anaerobic condition. In batch fermentation under microaerobic condition, K. cryocrescens S26 produced 27 g/l of ethanol from crude glycerol with high molar yield of 80% and productivity of 0.61 g/l/h. (orig.)

Evaluation of some chemical and physical parameters of Sudanese crude oil

International Nuclear Information System (INIS)

Mohamed, Elsamoual Hamdn Alla

2001-05-01

In this study crude oil samples were collected from four fields, Higlieg, Alnar, Toma south, and Unity at Elmuglad basin. A total of 20 samples were analyzed for Na, Ca, Mn, Fe, Co, Ni, Zn, Cd, and Pb, using atomic absorption spectrophotometer (Aas). For these samples some physical parameters were determined using standard techniques employed by the American Society for Testing and Materials (Astm). The range of concentration for Na, Mg, Ca, Mn, Fe, Co, Ni, Cu, Zn, Cd, and Pb are 0.33-22.20, 0.0-3.29, 0.56-7.70, 0.13-0.74, 1.70-6.33, 0.43-1.21, 1.02-9.80, 0.16-7.05, 0.12-4.88, 0.09-0.58, 0.15-0.82. μg/g, respectively. The results were subjected to statistical analysis such multivariate regression and principal component analysis. These statistical techniques revealed that the element found in the crude oil can be considered as contributed by two sources the biological precursor of oil and surrounding rocks. Comparison of the data obtained in this work with the data reported in the literature showed that the trace elements contents of Sudanese crude oil in most cases has the lowest concentration of harmful element especially Ni, and Fe.(Author)

Effectiveness and environmental considerations for non-dispersant chemical countermeasures

International Nuclear Information System (INIS)

Walker, A.H.; Kucklick, J.H.; Michel, J.

1999-01-01

Mechanical countermeasures for oil spill response have various effectiveness and operational limitations under certain spill situations. This has led to an interest in and use of alternative treatment methods. This chapter reviews the potential utility of one such group, nondispersant chemical countermeasures, in controlling the adverse impacts from marine oil spills. The types of nondispersant chemical countermeasures presented here include: herding agents, emulsion treating agents, solidifiers, elasticity modifiers, and shoreline cleaning agents. Each countermeasure group is discussed separately to provide a definition, mechanism of action, and effectiveness and environmental considerations for the group. Where ever possible, examples are given of countermeasure use during an actual spill. In addition to the groups mentioned above, a few other treating agents are briefly described under the section 'Miscellaneous Agents' to illustrate other, less prominent types of chemical countermeasures. Non-dispersant chemical countermeasures appear to have discrete response niches, i.e. situations where the countermeasures are well-suited and offer potential benefits. The key is matching conditions for optimal effectiveness with the appropriate incident-specific characteristics and window of opportunity. The practical aspects of logistics are not addressed because, if their potential utility can be demonstrated, the resolution of these issues would follow. (author)

Chemical composition of essential oils and in vitro antioxidant activity of fresh and dry leaves crude extracts of medicinal plant of Lactuca Sativa L. native to Sultanate of Oman.

Science.gov (United States)

Al Nomaani, Rahma Said Salim; Hossain, Mohammad Amzad; Weli, Afaf Mohammed; Al-Riyami, Qasim; Al-Sabahi, Jamal Nasser

2013-05-01

To isolate and analyse the chemical composition in the essential oils and free radical scavenging activity of different crude extracts from the fresh and dry leaves of vegetable plants of Lactuca sativa L. (L. sativa). The essential oils and volatile chemical constituents were isolated from the fresh and dry leaves of L. sativa (lettuce) grown in Sultanate of Oman by hydro distillation method. The antioxidant activity of the crude extracts was carried out by well established free radical scavenging activity (DPPH) method. About 20 chemical compounds of different concentration representing 83.07% and 79.88% respectively were isolated and identified by gas chromatography-mass spectroscopy in the essential oils isolated from the fresh and dry leaves as α-pinene (5.11% and 4.05%), γ-cymene (2.07% and 1.92%), thymol (11.55% and 10.73%), durenol (52.00% and 49.79%), α-terpinene (1.66% and 1.34%), thymol acetate (0.99% and 0.67%), caryophyllene (2.11% and 1.98%), spathulenol (3.09% and 2.98%), camphene (4.11% and 3.65%), limonene (1.28% and 1.11%) representing these major chemical compounds. However, some other minor chemical constituents were also isolated and identified from the essential oil of lettuce including β-pinene, α-terpinolene, linalool, 4-terpineol, α-terpineol, o-methylthymol, L-alloaromadendrene and viridiflorene. The chemical constituents in the essential oils from the locally grown lettuce were identified in the following classes or groups of chemical compounds such as monoterpenes, sesquiterpenes volatile organic compounds and their oxygenated hydrocarbons. Therefore, the essential oils and the crude extracts from Omani vegetable species of lettuce are active candidates which would be used as antioxidant, antifungal or antimicrobial agents in new drugs preparation for therapy of infectious diseases.

Investigation of the Chemical Changes from Crude and Processed Paeoniae Radix Alba-Atractylodis Macrocephalae Rhizoma Herbal Pair Extracts by Using Q Exactive High-Performance Benchtop Quadrupole-Orbitrap LC-MS/MS

Directory of Open Access Journals (Sweden)

Gang Cao

2014-01-01

Full Text Available The Paeoniae Radix Alba-Atractylodis Macrocephalae Rhizoma herbal pair is mainly used for regulating the functions of liver and spleen, benefiting qi, and nourishing blood. However, the bioactive compounds for the pharmacological activities of the crude and processed Paeoniae Radix Alba-Atractylodis Macrocephalae Rhizoma herbal pair extracts are still unclear to date. In the present study, Q Exactive high-performance benchtop quadrupole-Orbitrap LC-MS/MS was applied to identify the complicated components from crude and processed Paeoniae Radix Alba, crude and processed Atractylodis Macrocephalae Rhizoma, and their crude and processed herbal pair extracts. 123 and 101 compounds were identified in crude and processed Paeoniae Radix Alba samples, respectively. Meanwhile, 32 and 26 compounds were identified in crude and processed Atractylodis Macrocephalae Rhizoma samples, respectively. In the crude and processed Paeoniae Radix Alba-Atractylodis Macrocephalae Rhizoma herbal pair extracts, co-decoction could significantly change the chemical composition of Paeoniae Radix Alba and Atractylodis Macrocephalae Rhizoma in solution. The developed method may provide a scientific foundation for deeply elucidating the processing and compatibility mechanism of Paeoniae Radix Alba and Atractylodis Macrocephalae Rhizoma.

Elaboration in the area of low temperature chlorination of rare-metal crude ore

International Nuclear Information System (INIS)

Mirsaidov, U.M.

2002-01-01

The chemical base of low temperature chlorination of rare-metal crude ore was elaborated. The chemical nature of chlorination process which pass at low temperature was decoded and scientifically elaborated

Crude incompatibility problems at heavy crude unit desalter

International Nuclear Information System (INIS)

Kirmani, Z.; Khurshid, A.; Alam, N.; Gul, S.; Ahmed, N.

2009-01-01

Attock Refinery Limited (ARL) is based at Rawalpindi, Pakistan and operates a 40,000 Barrels per Stream Day (BPSD) refinery. The Heavy Crude Unit (HCU) of ARL is a fully integrated two-stage 10,000 BPSD Atmospheric and 5,700 BPSD Vacuum Distillation Unit. A 3-stage desalter designed to reduce salt and BS and W content from 2,000 parts per thousand barrels (PTB) and 2% to less than 5 PTB and 0.1% respectively, is part of HCU. The feedstock is a composite blend of 14 local Heavy Crudes received at the Refinery. Although in the past this desalter had been giving good performance, over the last one year, period since August 2005, at least nine shutdowns of the unit took place due to salt slippage and consequential tube leakages at the overhead Crude-Naphtha vapor Heat Exchanger where partial condensation of naphtha takes place. Final condensation is achieved in trim condenser. High salted water carry-over with the crude caused increased hydrolysis, formation of Hydrochloric acid and increase of tail water chlorides. Salt contents at the outlet of third desalter at times increased up to 400 PTB with 3.2% BS and W during the above mentioned upsets, as compared to normal 5-10 PTB. Fallout from this loss of desalter control was the creation of large quantities of slop due to draining of strong water oil emulsion from the desalters. Individual crudes of the blend were analyzed for affinity of water and emulsion stability. It was observed that 3 of the 14 crudes formed very strong while the remaining crudes formed weak oil water emulsion, which easily separated water from oil in desalter without any operational problem. Study was further narrowed down to one crude evaluation. Alkaline earth metallic naphthenate surfactants were detected and isolated as responsible for the strong water oil and sediments emulsion. The isolated crude was next withdrawn from the Heavy Crude blend. As soon as it was isolated and its ratio in heavy crude tank came down to 0.7 %, the problem began

Crude petroleum

International Nuclear Information System (INIS)

1990-01-01

Crude petroleum statistics by country of production, export values and import values from 1983 to 1988 are given. Table A.1 of the Annex includes free market prices and price indices for crude petroleum based on average of Dubai, United Kingdom Brent and Alaska N Slope crude prices (price expressed in dollars/barrel). The data sources are: Crude petroleum United Nations Statistical Office; OPEC Annual Statistical Bulletin, and Petroleum Economist. For trade the sources of data are: National trade statistics; United Nations international trade statistics; International Moneytary Fund (IMF); Organization of the Petroleum Exporting Countries (OPEC); UNCTAD secretariat estimates. Tabs

Changes of chemical properties of humic acids from crude and fungal transformed lignite

Energy Technology Data Exchange (ETDEWEB)

LianHua Dong; Quan Yuan; HongLi Yuan [China Agricultural University, Beijing (China). College of Biological Science

2006-12-15

The development of biological processes for fossil energy utilization has received increasing attention in recent years. There are abundance of lignite resources in China and the lignite, a low-grade coal, can be transformed by a Penicillium sp. After fungal transformation, the contents of humic acid and water-soluble humic material increased from 38.6% to 55.1%, and from less than 4.0% to 28.2%, respectively. The differences in chemical properties of crude lignite humic acid (aHA), fungal transformed lignite humic acid (bHA) and water-soluble humic material from fungal transformed lignite (WS) were studied. Elemental analysis and size exclusion chromatography showed that the N content of bHA increased by 47.36% compared with aHA, and the molecular mass of bHA was smaller than aHA. And the WS with the smallest molecular mass contained most content of N. The {sup 13}C NMR and FT-IR spectra of aHA and bHA showed that aHA contained more aromatic structure than bHA. 44 refs., 3 figs., 2 tabs.

Measuring 13Cβ chemical shifts of invisible excited states in proteins by relaxation dispersion NMR spectroscopy

International Nuclear Information System (INIS)

Lundstroem, Patrik; Lin Hong; Kay, Lewis E.

2009-01-01

A labeling scheme is introduced that facilitates the measurement of accurate 13 C β chemical shifts of invisible, excited states of proteins by relaxation dispersion NMR spectroscopy. The approach makes use of protein over-expression in a strain of E. coli in which the TCA cycle enzyme succinate dehydrogenase is knocked out, leading to the production of samples with high levels of 13 C enrichment (30-40%) at C β side-chain carbon positions for 15 of the amino acids with little 13 C label at positions one bond removed (∼5%). A pair of samples are produced using [1- 13 C]-glucose/NaH 12 CO 3 or [2- 13 C]-glucose as carbon sources with isolated and enriched (>30%) 13 C β positions for 11 and 4 residues, respectively. The efficacy of the labeling procedure is established by NMR spectroscopy. The utility of such samples for measurement of 13 C β chemical shifts of invisible, excited states in exchange with visible, ground conformations is confirmed by relaxation dispersion studies of a protein-ligand binding exchange reaction in which the extracted chemical shift differences from dispersion profiles compare favorably with those obtained directly from measurements on ligand free and fully bound protein samples

Improving Lowland Rice (O. sativa L. cv. MR219 Plant Growth Variables, Nutrients Uptake, and Nutrients Recovery Using Crude Humic Substances

Directory of Open Access Journals (Sweden)

Perumal Palanivell

2015-01-01

Full Text Available High cation exchange capacity and organic matter content of crude humic substances from compost could be exploited to reduce ammonia loss from urea and to as well improve rice growth and soil chemical properties for efficient nutrients utilization in lowland rice cultivation. Close-dynamic air flow system was used to determine the effects of crude humic substances on ammonia volatilization. A pot experiment was conducted to determine the effects of crude humic substances on rice plant growth, nutrients uptake, nutrients recovery, and soil chemical properties using an acid soil mixed with three rates of crude humic substances (20, 40, and 60 g pot−1. Standard procedures were used to evaluate rice plant dry matter production, nutrients uptake, nutrients recovery, and soil chemical properties. Application of crude humic substances increased ammonia volatilization. However, the lowest rate of crude humic substances (20 g pot−1 significantly improved total dry matter, nutrients uptake, nutrients recovery, and soil nutrients availability compared with crude humic substances (40 and 60 g pot−1 and the normal fertilization. Apart from improving growth of rice plants, crude humic substances can be used to ameliorate acid soils in rice cultivation. The findings of this study are being validated in our ongoing field trials.

Improving Lowland Rice (O. sativa L. cv. MR219) Plant Growth Variables, Nutrients Uptake, and Nutrients Recovery Using Crude Humic Substances.

Science.gov (United States)

Palanivell, Perumal; Ahmed, Osumanu Haruna; Ab Majid, Nik Muhamad; Jalloh, Mohamadu Boyie; Susilawati, Kasim

2015-01-01

High cation exchange capacity and organic matter content of crude humic substances from compost could be exploited to reduce ammonia loss from urea and to as well improve rice growth and soil chemical properties for efficient nutrients utilization in lowland rice cultivation. Close-dynamic air flow system was used to determine the effects of crude humic substances on ammonia volatilization. A pot experiment was conducted to determine the effects of crude humic substances on rice plant growth, nutrients uptake, nutrients recovery, and soil chemical properties using an acid soil mixed with three rates of crude humic substances (20, 40, and 60 g pot(-1)). Standard procedures were used to evaluate rice plant dry matter production, nutrients uptake, nutrients recovery, and soil chemical properties. Application of crude humic substances increased ammonia volatilization. However, the lowest rate of crude humic substances (20 g pot(-1)) significantly improved total dry matter, nutrients uptake, nutrients recovery, and soil nutrients availability compared with crude humic substances (40 and 60 g pot(-1)) and the normal fertilization. Apart from improving growth of rice plants, crude humic substances can be used to ameliorate acid soils in rice cultivation. The findings of this study are being validated in our ongoing field trials.

A Review of Hydrothermal Liquefaction Bio-Crude Properties and Prospects for Upgrading to Transportation Fuels

Directory of Open Access Journals (Sweden)

Jerome A. Ramirez

2015-07-01

Full Text Available Hydrothermal liquefaction (HTL presents a viable route for converting a vast range of materials into liquid fuel, without the need for pre-drying. Currently, HTL studies produce bio-crude with properties that fall short of diesel or biodiesel standards. Upgrading bio-crude improves the physical and chemical properties to produce a fuel corresponding to diesel or biodiesel. Properties such as viscosity, density, heating value, oxygen, nitrogen and sulphur content, and chemical composition can be modified towards meeting fuel standards using strategies such as solvent extraction, distillation, hydrodeoxygenation and catalytic cracking. This article presents a review of the upgrading technologies available, and how they might be used to make HTL bio-crude into a transportation fuel that meets current fuel property standards.

Identification of CYP1A inducing compounds in crude oil

Energy Technology Data Exchange (ETDEWEB)

Khan, C.W.; Hodson, P.V. [Queen' s Univ., Kingston, ON (Canada). Dept. of Biology; Hollebone, B.P.; Wang, Z. [Environment Canada, Ottawa, ON (Canada). Environmental Technology Advancement Directorate; Brown, R.S. [Queen' s Univ., Kingston, ON (Canada). Dept. of Chemistry

2004-07-01

One of the major sources of polycyclic aromatic hydrocarbons (PAHs) in aquatic ecosystems is crude oil. PAHs are responsible for developmental malformations in the early life stages of fish. The induction of CYP1A enzyme is characteristic of developmental toxicity caused by crude oil. As such, it is an effective biomarker of PAH uptake. It is not known which PAHs cause toxicity because of the complex chemical composition of crude oil. In this study, an approach called Toxicity Identification and Evaluation (TIE) was used with different crude oils to separate bioavailable PAHs into petroleum sub-fractions. The extent of CYP1A induction in rainbow trout was measured after 48 hour exposures to each fraction. Low temperature vacuum distillation was used to create white gas, kerosene, coal tar/bitumen and wax fractions. Hepatic CYP1A activity was induced by whole oil and some fractions. The highest PAH concentration was found in the coal tar/bitumen fraction which accounted for most CYP1A induction in whole oil. The wax fraction also caused moderate CYP1A induction, but the white gas fraction did not cause any CYP1A induction. The hypothesis that alkyl PAH may be the most significant source of CYP1A inducers in the coal tar/bitumen fraction was supported by chemical analysis of CYP1A induction potency. Results showed that benzo[a]pyrene accounts for nearly all of the CYP1A induction caused by the wax fraction.

Heavy oils processing materials requirements crude processing

Energy Technology Data Exchange (ETDEWEB)

Sloley, Andrew W. [CH2M Hill, Englewood, CO (United States)

2012-07-01

Over time, recommended best practices for crude unit materials selection have evolved to accommodate new operating requirements, feed qualities, and product qualities. The shift to heavier oil processing is one of the major changes in crude feed quality occurring over the last 20 years. The three major types of crude unit corrosion include sulfidation attack, naphthenic acid attack, and corrosion resulting from hydrolyzable chlorides. Heavy oils processing makes all three areas worse. Heavy oils have higher sulfur content; higher naphthenic acid content; and are more difficult to desalt, leading to higher chloride corrosion rates. Materials selection involves two major criteria, meeting required safety standards, and optimizing economics of the overall plant. Proper materials selection is only one component of a plant integrity approach. Materials selection cannot eliminate all corrosion. Proper materials selection requires appropriate support from other elements of an integrity protection program. The elements of integrity preservation include: materials selection (type and corrosion allowance); management limits on operating conditions allowed; feed quality control; chemical additives for corrosion reduction; and preventive maintenance and inspection (PMI). The following discussion must be taken in the context of the application of required supporting work in all the other areas. Within that context, specific materials recommendations are made to minimize corrosion due to the most common causes in the crude unit. (author)

Developmental toxicity in flounder embryos exposed to crude oils derived from different geographical regions.

Science.gov (United States)

Jung, Jee-Hyun; Lee, Eun-Hee; Choi, Kwang-Min; Yim, Un Hyuk; Ha, Sung Yong; An, Joon Geon; Kim, Moonkoo

2017-06-01

Crude oils from distinct geographical regions have distinct chemical compositions, and, as a result, their toxicity may be different. However, developmental toxicity of crude oils derived from different geographical regions has not been extensively characterized. In this study, flounder embryos were separately exposed to effluents contaminated by three crude oils including: Basrah Light (BLO), Pyrenees (PCO), and Sakhalin Vityaz (SVO), in addition to a processed fuel oil (MFO-380), to measure developmental toxicity and for gene expressions. Each oil possessed a distinct chemical composition. Edema defect was highest in embryos exposed to PCO and MFO-380 that both have a greater fraction of three-ring PAHs (33% and 22%, respectively) compared to BLO and SVO. Observed caudal fin defects were higher in embryos exposed to SVO and MFO-380, which are both dominated by naphthalenes (81% and 52%, respectively). CYP1A gene expressions were also highest in embryos exposed to SVO and MFO-380. Higher incidence of cardiotoxicity and lower nkx 2.5 expression were detected in embryos exposed to PCO. Unique gene expression profiles were observed in embryos exposed to crude oils with distinct compositions. This study demonstrates that crude oils of different geographical origins with different compositional characteristics induce developmental toxicity to different degrees. Copyright © 2017 Elsevier Inc. All rights reserved.

Effect of Prudhoe Bay crude oil on the homing of coho salmon in marine waters

International Nuclear Information System (INIS)

Nakatani, R.E.; Nevissi, A.E.

1991-01-01

Resource managers and the fishing industry have expressed concern that a crude-oil spill occurring in the pathway of a salmon run may destroy the ability of the maturing salmon to reach the home stream. To address this concern, groups of mature 3-year-old and precocious 2-year-old coho salmon Oncorhynchus kisutch were tagged and exposed in seawater for 1 hr to sublethal concentration of Prudhoe Bay crude oil, dispersed oil, or seawater oil dispersant alone, and then were released in seawater about 5 km from their home stream. The results show that the coho salmon's homing success and speed of return to the home stream were not affected by any of the treatments. The longevity or holding tests, in which coho salmon were held in saltwater netpens after experimental treatments, showed that the larger 3-year-old coho salmon were more sensitive to the stress of confinement than the smaller 2-year-old fish

Economic feasibility of biochemical processes for the upgrading of crudes and the removal of sulfur, nitrogen, and trace metals from crude oil -- Benchmark cost establishment of biochemical processes on the basis of conventional downstream technologies. Final report FY95

Energy Technology Data Exchange (ETDEWEB)

Premuzic, E.T.

1996-08-01

During the past several years, a considerable amount of work has been carried out showing that microbially enhanced oil recovery (MEOR) is promising and the resulting biotechnology may be deliverable. At Brookhaven National Laboratory (BNL), systematic studies have been conducted which dealt with the effects of thermophilic and thermoadapted bacteria on the chemical and physical properties of selected types of crude oils at elevated temperatures and pressures. Current studies indicate that during the biotreatment several chemical and physical properties of crude oils are affected. The oils are (1) emulsified; (2) acidified; (3) there is a qualitative and quantitative change in light and heavy fractions of the crudes; (4) there are chemical changes in fractions containing sulfur compounds; (5) there is an apparent reduction in the concentration of trace metals; and (6) the qualitative and quantitative changes appear to be microbial species dependent; and (7) there is a distinction between biodegraded and biotreated oils. The downstream biotechnological crude oil processing research performed thus far is of laboratory scale and has focused on demonstrating the technical feasibility of downstream processing with different types of biocatalysts under a variety of processing conditions. Quantitative economic analysis is the topic of the present project which investigates the economic feasibility of the various biochemical downstream processes which hold promise in upgrading of heavy crudes, such as those found in California, e.g., Monterey-type, Midway Sunset, Honda crudes, and others.

Chemical exchange effects during refocusing pulses in constant-time CPMG relaxation dispersion experiments

International Nuclear Information System (INIS)

Myint, Wazo; Ishima, Rieko

2009-01-01

In the analysis of the constant-time Carr-Purcell-Meiboom-Gill (CT-CPMG) relaxation dispersion experiment, chemical exchange parameters, such as rate of exchange and population of the exchanging species, are typically optimized using equations that predict experimental relaxation rates recorded as a function of effective field strength. In this process, the effect of chemical exchange during the CPMG pulses is typically assumed to be the same as during the free-precession. This approximation may introduce systematic errors into the analysis of data because the number of CPMG pulses is incremented during the constant-time relaxation period, and the total pulse duration therefore varies as a function of the effective field strength. In order to estimate the size of such errors, we simulate the time-dependence of magnetization during the entire constant time period, explicitly taking into account the effect of the CPMG pulses on the spin relaxation rate. We show that in general the difference in the relaxation dispersion profile calculated using a practical pulse width from that calculated using an extremely short pulse width is small, but under certain circumstances can exceed 1 s -1 . The difference increases significantly when CPMG pulses are miscalibrated

Characterization of Petroleum Hydrocarbons in Post-Burn Crude Oil ...

African Journals Online (AJOL)

In the Niger delta, crude oil spilled soils are burned as a means of decontaminating the impacted soils. Gas chromatography - flame ionization detector (GCFID) analyses were performed on oil residues extracted from burnt spilled oil soil samples to facilitate detailed chemical composition and characterization of petroleum ...

Turbidity removal from surface water using Tamarindus indica crude ...

African Journals Online (AJOL)

Plant-based coagulants are potential alternatives to chemical coagulants used in drinking water treatment. This paper examined the turbidity removal efficiency of Tamarindus indica fruit crude pulp extract (CPE) towards evaluating a low-cost option for drinking-water treatment. Laboratory analysis was carried out on high ...

Chromatographic and spectroscopic analysis of heavy crude oil mixtures with emphasis in nuclear magnetic resonance spectroscopy: A review

International Nuclear Information System (INIS)

Silva, Sandra L.; Silva, Artur M.S.; Ribeiro, Jorge C.; Martins, Fernando G.; Da Silva, Francisco A.; Silva, Carlos M.

2011-01-01

Graphical abstract: The chromatographic and spectroscopic techniques used to characterize heavy crude oils, although more focused in the nuclear magnetic resonance spectroscopy as the technique of choice, due to its capability to provide great information on the chemical nature of individual types of proton and carbon atoms in different and complex mixtures of crude oils are described. This review is based on 65 references and describes in a critical and interpretative ways the advantages of the NMR spectroscopy as a main technique to be used in crude oil refining industries that want to characterize crude oil fractions and the obtained refined products. Highlights: ► Chromatogrfaphic and spectroscopic techniques used to characterize heavy crude oils have been reviewed. ► This review describes in a critical and interpretative ways the advantages of the NMR spectroscopy as a main technique to be used in crude oil refining industries. ► The progress in the interpretation of the NMR spectra and of different multivariate data analyses and their potential in the identification and characterization of hydrocarbons and their physical and chemical properties have also been reviewed. - Abstract: The state of the art in the characterization of heavy crude oil mixtures is presented. This characterization can be done by different techniques, such as gas chromatography (GC), high performance liquid chromatography (HPLC), thin layer chromatography (TLC), infrared spectroscopy (IR), Raman spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and mass spectrometry (MS). Nuclear magnetic resonance spectroscopy is the technique of choice due to its capability to provide information on the chemical nature of individual types of hydrogen and carbon atoms in different and complex mixtures of crude oils. The progress made in the interpretation of the NMR spectra with the development of new NMR techniques and different multivariate data analyses could give relevant

A catalogue of crude oil and oil product properties, 1990

International Nuclear Information System (INIS)

Bobra, M.A.; Callaghan, S.

1990-09-01

This catalogue is a compilation of available data on crude oils and petroleum products. The emphasis of the catalogue is upon oils which could potentially impact Canada's environment. Other oils which are unlikely to be of direct Canadian concern are also included because they have been well characterized and used in relevant studies. The properties listed for each oil are those which will provide an indication of a spilled oil's environmental behaviour and effects. The properties on which data is provided include API gravity, density, viscosity, interfacial tension, pour point, flash point, vapor pressure, volatility and component distribution, emulsion formation tendency and stability, weathering, dispersability, major hydrocarbon groups, aqueous solubility, toxicity, sulfur content, fire point, and wax content. Most of the chemical-physical properties listed in this catalogue were measured using standard tests. For certain properties, data are given at different temperatures and for different degrees of oil weathering. An oil's degree of weathering is expresed as the volume or weight percent evaporated from the fresh oil. Weathered oils used for testing were artificially weathered by gas stripping following the method of Mackay and Stiver. 109 refs

A catalogue of crude oil and oil product properties, 1992

International Nuclear Information System (INIS)

Whiticar, S.; Bobra, M.; Liuzzo, P.; Callaghan, S.; Fingas, M.; Jokuty, P.; Ackerman, F.; Cao, J.

1993-02-01

This catalogue is a compilation of available data on crude oils and petroleum products. The emphasis of the catalogue is upon oils which could potentially impact Canada's environment. Other oils which are unlikely to be of direct Canadian concern are also included because they have been well characterized and used in relevant studies. The properties listed for each oil are those which will provide an indication of a spilled oil's environmental behaviour and effects. The properties on which data is provided include API gravity, density, viscosity, interfacial tension, pour point, flash point, vapor pressure, volatility and component distribution, emulsion formation tendency and stability, weathering, dispersability, major hydrocarbon groups, aqueous solubility, toxicity, sulfur content, fire point, and wax content. Most of the chemical-physical properties listed in this catalogue were measured using standard tests. For certain properties, data are given at different temperatures and for different degrees of oil weathering. An oil's degree of weathering is expresed as the volume or weight percent evaporated from the fresh oil. Weathered oils used for testing were artificially weathered by gas stripping following the method of Mackay and Stiver. 140 refs

Canada's crude oil resources : crude oil in our daily lives

International Nuclear Information System (INIS)

Bott, R.

2001-10-01

Created in 1975, the Petroleum Communication Foundation is a not-for-profit organization. The objective of the Foundation is to inform Canadians about the petroleum industry in Canada. It produces educational, fact-based publications and programs, employing a multi-stakeholder review process. The first section of this publication is devoted to crude oil and the benefits that are derived from it. It begins by providing a brief definition of crude oil, then moves to the many uses in our daily lives and the environmental impacts like air pollution, spills, and footprint on the land from exploration and production activities. Section 2 details the many uses of crude oil and identifies the major oil producing regions of Canada. A quick mention is made of non-conventional sources of crude oil. The search for crude oil is the topic of section 3 of the document, providing an overview of the exploration activities, the access rights that must be obtained before gaining access to the resource. The drilling of oil is discussed in section 4. Section 5 deals with issues pertaining to reservoirs within rocks, while section 6 covers the feeding of the refineries, discussing topics from the movement of oil to market to the refining of the crude oil, and the pricing issues. In section 7, the uncertain future is examined with a view of balancing the supply and demand, as crude oil is a non-renewable resource. Supplementary information is provided concerning additional publications published by various organizations and agencies. figs

Use of adsorption and gas chromatographic techniques in estimating biodegradation of indigenous crude oils

International Nuclear Information System (INIS)

Kokub, D.; Allahi, A.; Shafeeq, M.; Khalid, Z.M.; Malik, K.A.; Hussain, A.

1993-01-01

Indigenous crude oils could be degraded and emulsified upto varying degree by locally isolated bacteria. Degradation and emulsification was found to be dependent upon the chemical composition of the crude oils. Tando Alum and Khashkheli crude oils were emulsified in 27 and 33 days of incubation respectively. While Joyamair crude oil and not emulsify even mainly due to high viscosity of this oil. Using adsorption chromatographic technique, oil from control (uninoculated) and bio degraded flasks was fractioned into the deasphaltened oil containing saturate, aromatic, NSO (nitrogen, sulphur, oxygen) containing hydrocarbons) and soluble asphaltenes. Saturate fractions from control and degraded oil were further analysed by gas liquid chromatography. From these analyses, it was observed that saturate fraction was preferentially utilized and the crude oils having greater contents of saturate fraction were better emulsified than those low in this fraction. Utilization of various fractions of crude oils was in the order saturate> aromatic> NSO. (author)

Modeling of crude oil fouling in preheat exchangers of refinery distillation units

Energy Technology Data Exchange (ETDEWEB)

Jafari Nasr, Mohammad Reza; Majidi Givi, Mehdi [National Petrochemical Research and Technology Company (NPC-RT), P.O. Box 14385, Tehran (Iran)

2006-10-15

The aim of this paper is to propose a new model for crude oil fouling in preheat exchangers of crude distillation units. The experimental results of Australian light crude oil with the tube side surface temperature between 200 and 260{sup o}C and fluid velocity ranged 0.25-0.4m/s were used [Z. Saleh, R. Sheikholeslami, A.P. Watkinson, Heat exchanger fouling by a light australian crude oil, in: Heat Exchanger Fouling and Cleaning Fundamentals and Applications, Santa Fe, 2003]. The amount of activation energy depends on the surface temperature has been calculated. A new model including a term for fouling formation and a term for fouling removal due to chemical and tube wall shear stress was proposed, respectively. The main superiority of the model are independent to Pr number, thermal fouling removal and determination of {beta} based on experimental tests. Finally using the proposed model the fouling rate of Australian light crude oil has been calculated and the threshold curves to identify fouling and no fouling formation zones have been drawn. (author)

Comparative toxicity of four crude oils to the early life stages of rainbow trout (Oncorhynchus mykiss)

International Nuclear Information System (INIS)

Clarke, L.M.J.; Khan, C.W.; Akhtar, P.; Hodson, P.V.; Short, J.W.

2004-01-01

Crude oil is a source of polycyclic aromatic hydrocarbons (PAH) in aquatic ecosystems. Fish that are chronically exposed to alkyl PAHs show dioxin-like toxicity characterized by the presence of blue sac disease (BSD) and the induction of cytochrome P4501A (CYP1A). This study compared the relative toxicity of four crude oils (Scotian Light Crude, MESA, the synthetic Federated Crude, and Alaska North Slope Crude) to early life stages of rainbow trout (Oncorhynchus mykiss). The study examined the influence of the four crudes in causing the disease in rainbow trout embryos living in simulated spawning beds with hydrocarbon-contaminated gravel. Each oil had different chemical characteristics and PAH concentrations. Mortality in the direct exposure experiment increased as the oil concentration increased. The same trend was observed for the BSD prevalence. The study showed that Scotian Light Crude was the least toxic, with BSD increasing only at the highest concentration. 7 refs., 2 tabs., 1 fig

Bioaccumulation and subacute toxicity of mechanically and chemically dispersed heavy fuel oil in sea urchin (Glyptocidaris crenulari

Directory of Open Access Journals (Sweden)

Bailin Yang

2015-12-01

Full Text Available Oil spills have a disastrous ecological impact on ecosystems but few data are available for the effects of dispersed oil on benthic marine organisms. In order to provide information for assessment, we analysed the hydrocarbon compositions of the mechanically dispersed water accommodated fraction (MDWAF and the chemically dispersed water accommodated fraction (CDWAF of No. 120 fuel oil, their bioaccumulation, and DNA damage related to oil exposure, using the sea urchin as a sentinel organism. The results show that the concentration of polycyclic aromatic hydrocarbon in the tissues of sea urchin exposed to the CDWAF is higher than that of those exposed to the MDWAF. The single cell gel electrophoresis assay results also indicated higher DNA damage from exposure to the CDWAF of oil. Thus, dispersants should be applied with caution in oil spill accidents.

[Determination of naphthenic acids in distillates of crude oil by gas chromatography/chemical ionization-mass spectrometry].

Science.gov (United States)

Lü, Zhenbo; Tian, Songbai; Zhai, Yuchun; Sun, Yanwei; Zhuang, Lihong

2004-05-01

The petroleum carboxylic acids in 200-420 degrees C distillate of crude oil were separated by the extraction with column chromatography on an anion exchange resin. The effect of the composition and structure of naphthenic acids on separation were studied by the infra-red (IR) spectroscopic techniques. Naphthenic acids and iso-butane reagent gas were introduced into the ion source for chemical ionization, in which the ions represented by [M + C4H9]+ were used to calculate the relative molecular mass for each acid. Based on the mass spectra of pure fatty and naphthenic acids, in combination with the z-series formula CnH(2n + z)O2, the naphthenic acids can be classified into fatty, mono-, bi- ... hexa-cyclic types. The results indicated that the relative molecular mass range of naphthenic acids in this distillates was 170-510, and the carbon number range was C10-C35. The contents of bi-cyclic and tri-cyclic naphthenic acids were higher than others.

Market potential for Canadian crude oil

International Nuclear Information System (INIS)

Heath, M.; Fisher, L.; Golosinski, D.; Luthin, A.; Gill, L.; Raggett, C.

1997-01-01

Future key markets for Canadian crude were evaluated, and probable flow volumes and prices were identified. Key concerns of market participants such as pricing, alternative crude sources, pipeline tariffs and crude quality, were examined. An overview of the competition faced by Canadian crude supply in global markets was presented. World crude oil supply and demand was discussed. US and Canadian crude oil supply (2000 to 2010), refinery demand for light and heavy crudes, existing future crude oil and refined product pipeline infrastructure, and pricing implications of changing crude oil flows were analyzed. The general conclusion was that the US market will continue to provide growing markets for Canadian crude oil, and that the Canadian supply to fulfill increased export requirements will be available due to the combined effects of increasing heavy crude supply, growing production from the east coast offshore, and recent and ongoing pipeline expansions and additions. 20 refs., 64 tabs., 42 figs

1999 Crude oil market outlook

International Nuclear Information System (INIS)

Cochener, J.

1998-01-01

Baseline projection handling of crude oil prices was discussed, based on actual crude oil price trends from 1992 to 1998. Attention was drawn to the lack of correlation between crude oil and natural gas prices. Predictions for crude oil production were extended to the year 2015. As far as the immediate future is concerned the crude oil price for 1999 was predicted to continue to be sluggish due to competitive pressure from refined products at burner tip. tabs., figs

Chemically emulsified crude oil as substrate for bacterial oxidation : differences in species response

International Nuclear Information System (INIS)

Bruheim, P.; Eimhjellen, K.

1998-01-01

The ability of bacterial species to oxidize alkanes in crude oil in water emulsions was studied. Alkanes in crude oil need specific physiological adaptations to the microorganisms. Synthesis of biosurfactants has been considered as a prerequisite for either specific adhesion mechanisms to large oil drops or emulsification of oil followed by uptake of submicron oil droplets. In this study four bacterial species were tested. Emulsions were prepared by nonionic sorbitan ester and polyoxyethylene ether surfactants. The oxidation rates were measured. Both positive and negative effects of surfactant amendments were observed. The same surfactant affected different bacteria in different ways. The response to the surfactant amendment depended on the physiological state of the bacteria. The results showed that surfactants resulted in decreased cell adhesion to the oil phase for all the bacteria. 19 refs., 3 tabs., 4 figs

Studies on free-radical scavenging activity and identification of active ingredients of different plant crude extracts of Mentha piperita collected from Sur, Sultanate of Oman

Institute of Scientific and Technical Information of China (English)

Mohammad Amzad Hossain; Aqeela Said Hamed AL Orimi; Afaf Mohammed Weli; Qasim Al-Riyami; Jamal Nasser Al-Sabahi

2014-01-01

Objective: To determine free radical scavenging activity and active chemical ingredients of different plant crude extracts of Mentha piperita (M. piperita). Methods: The dried powder leaves of M. piperita were extracted with polar organic solvent by Soxhlet extractor. The crude extract and its fractions of hexane, chloroform, ethyl acetate and butanol crude extracts were prepared. The antioxidant activity of different crude extracts from M. piperita was carried out by DPPH method with minor modification, and the active chemical ingredients of different plant crude extracts of M. piperita were analyzed by gas chromatography-mass spectrometry (GC-MS). Results: Qualitative analysis of different polarities crude extracts by GC-MS found different types of active organic compounds. The antioxidant activity of different crude extracts were found to be in the order of chloroform extract> butanol extract> ethyl acetate extract> hexane extract>methanol extract. Majority identified compounds in the plant crude extracts by GC-MS were biologically active. Conclusions: Therefore, the isolation, purification, identification and characterization of bioactive compounds from various crude extracts of M. piperita might have ecological significance.

Prediction of physical-chemical properties of crude oils by 1H NMR analysis of neat samples and chemometrics.

Science.gov (United States)

Masili, Alice; Puligheddu, Sonia; Sassu, Lorenzo; Scano, Paola; Lai, Adolfo

2012-11-01

In this work, we report the feasibility study to predict the properties of neat crude oil samples from 300-MHz NMR spectral data and partial least squares (PLS) regression models. The study was carried out on 64 crude oil samples obtained from 28 different extraction fields and aims at developing a rapid and reliable method for characterizing the crude oil in a fast and cost-effective way. The main properties generally employed for evaluating crudes' quality and behavior during refining were measured and used for calibration and testing of the PLS models. Among these, the UOP characterization factor K (K(UOP)) used to classify crude oils in terms of composition, density (D), total acidity number (TAN), sulfur content (S), and true boiling point (TBP) distillation yields were investigated. Test set validation with an independent set of data was used to evaluate model performance on the basis of standard error of prediction (SEP) statistics. Model performances are particularly good for K(UOP) factor, TAN, and TPB distillation yields, whose standard error of calibration and SEP values match the analytical method precision, while the results obtained for D and S are less accurate but still useful for predictions. Furthermore, a strategy that reduces spectral data preprocessing and sample preparation procedures has been adopted. The models developed with such an ample crude oil set demonstrate that this methodology can be applied with success to modern refining process requirements. Copyright © 2012 John Wiley & Sons, Ltd.

EVALUATION OF CORROSION COST OF CRUDE OIL PROCESSING INDUSTRY

Directory of Open Access Journals (Sweden)

ADESANYA A.O.

2012-08-01

Full Text Available Crude oil production industry as the hub of Nigeria Economy is not immune to the global financial meltdown being experienced world over which have resulted in a continual fall of oil price. This has necessitated the need to reduce cost of production. One of the major costs of production is corrosion cost, hence, its evaluation. This research work outlined the basic principles of corrosion prevention, monitoring and inspection and attempted to describe ways in which these measures may be adopted in the context of oil production. A wide range of facilities are used in crude oil production making it difficult to evaluate precisely the extent of corrosion and its cost implication. In this study, cost of corrosion per barrel was determined and the annualized value of corrosion cost was also determined using the principles of engineering economy and results analyzed using descriptive statistics. The results showed that among the corrosion prevention methods identified, the use of chemical treatment gave the highest cost contribution (81% of the total cost of prevention while coating added 19%. Cleaning pigging and cathodic protection gave no cost. The contribution of corrosion maintenance methods are 60% for repairs and 40% for replacement. Also among the corrosion monitoring and inspection identified, NDT gave the highest cost contribution of 41% of the total cost, followed by coating survey (34%. Cathodic protection survey and crude analysis gives the lowest cost contribution of 19% and 6% respectively. Corrosion control cost per barrel was found to be 77 cent/barrel. The significance of this cost was not much due to high price of crude oil in the international market. But the effect of corrosion in crude oil processing takes its toll on crude oil production (i.e. deferment.

A Canadian refiner's perspective of synthetic crudes

International Nuclear Information System (INIS)

Halford, T.L.; McIntosh, A.P.; Rasmussen

1997-01-01

Some of the factors affecting a refiner's choice of crude oil include refinery hardware, particularly gas oil crackers, products slate and product specifications, crude availability, relative crude price and crude quality. An overview of synthetic crude, the use of synthetic crude combined with other crudes and a comparison of synthetic crude with conventional crude oil was given. The two main users of synthetic crude are basically two groups of refiners, those large groups who use synthetic crude combined with other crudes, and a smaller group who run synthetic crude on specially designed units as a sole feed. The effects of changes in fuel legislation were reviewed. It was predicted that the changes will have a mixed impact on the value of synthetic crude, but low sulphur diesel regulations and gasoline sulphur regulations will make current synthetic crudes attractive. The big future change with a negative impact will be diesel cetane increases to reduce engine emissions. This will reduce synthetic crude attractiveness due to distillate yields and quality and high gas oil yields. Similarly, any legislation limiting aromatics in diesel fuel will also make synthetic crudes less attractive. Problems experienced by refiners with hardware dedicated to synthetic crude (salt, naphthenic acid, fouling, quality variations) were also reviewed. 3 tabs

A new methodology for studying nanoparticle interactions in biological systems: Dispersing titania in biocompatible media using chemical stabilisers

Science.gov (United States)

Ramirez-Garcia, Sonia; Chen, Lan; Morris, Michael A.; Dawson, Kenneth A.

2011-11-01

We report here a highly successful and original protocol for the dispersion of nanoparticles in biocompatible fluids for in vitro and in vivo studies of the nanoparticle-biology interaction. Titania is chosen as a suitable model as it is one of the priority materials listed by the OECD and small particles of the anatase structure are extensively used as e.g. photocatalysts in solar cells. Consequently, its delivery into the environment and its interaction with biological organisms is unavoidable. Therefore, its biological effect needs to be understood. In this work, we prepared stable nanoparticle dispersions of anatase aggregates using citrate stabilisations between 45 and 55 nm at concentrations of up to 10 mg mL-1. The optimum pH for this type of suspension was 7, resulting in ζ-potentials of approximately -50 mV. The stabilised aggregates were the subject of dialysis to produce stable dispersions without the chemical stabiliser, thus allowing studies in the absence of potentially toxic chemicals. Different sizing techniques such as Dynamic Light Scattering (DLS), Nanoparticle Tracking Analysis (NTA) and Differential Centrifuge Sedimentation (DCS) were used to characterise the different suspensions. The results obtained with each of these techniques are compared and a critical analysis of the suitability of each technique is given.We report here a highly successful and original protocol for the dispersion of nanoparticles in biocompatible fluids for in vitro and in vivo studies of the nanoparticle-biology interaction. Titania is chosen as a suitable model as it is one of the priority materials listed by the OECD and small particles of the anatase structure are extensively used as e.g. photocatalysts in solar cells. Consequently, its delivery into the environment and its interaction with biological organisms is unavoidable. Therefore, its biological effect needs to be understood. In this work, we prepared stable nanoparticle dispersions of anatase aggregates

In situ production of bio-surfactants: An alternative method for dispersing and bioremediating marine oil spills

International Nuclear Information System (INIS)

Josefsen, K.D.; Sveum, P.; Ramstad, P.; Markussen, S.; Folkvord, K.; Krigsvoll, K.; Aune, R.; Storroe, I.

1995-01-01

Some oil degrading bacteria are able to produce surfactants. These biosurfactants enhance dispersion of oil droplets into the water column. A large number of surfactant producing bacterial strains have been isolated from seawater samples collected at different sites around the world. Strains isolated from seawater samples collected in cold regions generally had better properties than strains isolated from warm seawater. Many of the isolated strains were able to disperse crude oils with a large variation of composition, as well as the water-in-emulsion (chocolate mousse) formed during weathering of crude oil in the sea. The results show that in situ application of surfactant producing bacteria can be a viable tool in future oil spill contingency, and that dispersion of oil may increase the biodegradation rate. Work is in progress to examine the use of such bacteria in the bioremediation of oil contaminated shorelines. 10 refs., 3 figs., 2 tabs

Ethoxyresorufin-O-deethylase activity and fixed wavelength fluorescence detection of PAHs metabolites in bile in turbot (Scophthalmus maximus L.) exposed to a dispersed topped crude oil in a continuous flow system

International Nuclear Information System (INIS)

Camus, L.; Aas, E.; Borseth, J.F.

1998-01-01

Long term effects of sublethal concentrations of oil on the marine environment have become of general concern. Cytochrome P4501A activity (EROD) in liver and fixed wavelength fluorescence detection of PAHs metabolites (FF) have in this study been used as biomarkers for dispersed oil exposure on a long term period of juvenile turbot (Scophthalmus maximus L.). A Continuous Flow System was used to carry out the study. The fish were continuously exposed to 0.125, 0.5 or 2.0 mg litre -1 dispersed topped crude oil for 6, 15, 24h 4 and 21 days followed by a 9 day recovery period in clean seawater. No induction of the cytochrome P4501A was measured. A maximum level in bile metabolites (4- to 5-fold) was recorded after 24h of exposure revealing thereby a detoxification process, but a decline occurred from day 4 to day 21. This study demonstrated that FF detection of PAHs metabolites in bile could be a more sensitive biomarker than EROD activity in a long term exposure to sublethal concentration of oil. (author)

Role of EPS, Dispersant and Nutrients on the Microbial Response and MOS Formation in the Subarctic Northeast Atlantic

Directory of Open Access Journals (Sweden)

Tony Gutierrez

2017-04-01

Full Text Available In this study we report the formation of marine oil snow (MOS, its associated microbial community, the factors influencing its formation, and the microbial response to crude oil in surface waters of the Faroe-Shetland Channel (FSC. The FSC is a subarctic region that is hydrodynamically complex located in the northeast Atlantic where oil extraction is currently occurring and where exploration is likely to expand into its deeper waters (>500 m. A major oil spill in this region may mirror the aftermath that ensued following the Deepwater Horizon (DWH blowout in the Gulf of Mexico, where the massive influx of Macondo crude oil triggered the formation of copious quantities of rapidly sinking MOS and successional blooms of opportunistic oil-degrading bacteria. In laboratory experiments, we simulated environmental conditions in sea surface waters of the FSC using water collected from this site during the winter of 2015. We demonstrated that the presence of dispersant triggers the formation of MOS, and that nutrient amendments magnify this. Illumina MiSeq sequencing revealed the enrichment on MOS of associated oil-degrading (Cycloclasticus, Thalassolituus, Marinobacter and EPS-producing (Halomonas, Pseudoalteromonas, Alteromonas bacteria, and included major representation by Psychrobacter and Cobetia with putative oil-degrading/EPS-producing qualities. The formation of marine snow, in the absence of crude oil and dispersant, in seawater amended with nutrients alone indicated that the de novo synthesis of bacterial EPS is a key factor in MOS formation, and the glycoprotein composition of the MOS aggregates confirmed that its amorphous biopolymeric matrix was of microbial (likely bacterial origin. The presence of dispersants and crude oil with/without nutrients resulted in distinct microbial responses marked by intermittent, and in some cases short-lived, blooms of opportunistic heterotrophs, principally obligate hydrocarbonoclastic (Alcanivorax

Radiation-induced desulfurization of Arabian crude oil and straight-run diesel

International Nuclear Information System (INIS)

Basfar, A.A.; Mohamed, K.A.

2011-01-01

Radiation-induced desulfurization of four types of Arabian crude oils (heavy, medium, light and extra light) and straight-run diesel (SRD) was investigated over the range of 10-200 kGy. Results show that gamma radiation processing at absorbed doses up to 200 kGy without further treatment is not sufficient for desulfurization. However, the combination of gamma-irradiation with other physical/chemical processes (i.e. L/L extraction, adsorption and oxidation) may be capable of removing considerable levels of sulfur compounds in the investigated products. Currently, this approach of combined radiation/physical/chemical processes is under investigation. The findings of these attempts will be reported in the future. - Highlights: → Irradiation effect on desulfurization in Arabian crude oils and straight-run diesel was investigated. → No noticeable changes in sulfur content after irradiation up to 200 kGy were observed. → Stricter regulations on sulfur levels in fuels motivate search for improved desulfurization processes. → Limited investigations on radiation-induced desulfurization of oil products are conducted.

Effects of surfactants on bacteria and the bacterial degradation of alkanes in crude oil

Energy Technology Data Exchange (ETDEWEB)

Bruheim, Per

1998-12-31

This thesis investigates the effects of surfactants on the bacterial degradation of alkanes in crude oil. Several alkane oxidising Gram positive and Gram negative were tested for their abilities to oxidise alkanes in crude oil emulsified with surfactants. The surfactants used to make the oil in water emulsions were either of microbial or chemical origin. Oxidation rates of resting bacteria oxidising various crude oil in water emulsions were measured by Warburg respirometry. The emulsions were compared with non-emulsified oil to see which was the preferred substrate. The bacteria were pregrown to both the exponential and stationary phase of growth before harvesting and preparation for the Warburg experiments. 123 refs., 4 figs., 14 tabs.

Distillation fraction-specific ecotoxicological evaluation of a paraffin-rich crude oil

International Nuclear Information System (INIS)

Erlacher, Elisabeth; Loibner, Andreas P.; Kendler, Romana; Scherr, Kerstin E.

2013-01-01

Crude oil is a complex mixture of petroleum hydrocarbons (PHC) with distinct chemical, physical and toxicological properties relevant for contaminated site risk assessment. Ecotoxicological effects of crude oil distillation fractions on luminescent bacteria (Vibrio fischeri), earthworms (Dendrobaena hortensis) and invertebrates (Heterocypris incongruens) were tested using two spiked soils and their elutriates. Fraction 2 (F2) had an equivalent carbon number (ECN) range of >10 to 16, and F3 from >16 to 39. F2 showed a substantially higher ecotoxicological effect than F3 for Vibrio and Dendrobaena. In contrast, severe inhibition of Heterocypris by the poorly soluble F3 is attributed to mechanical organ blockage. Immediate sequestration of PHC to the organic matter-rich soil effected reduced toxicity for all organisms. This study indicates that a more differentiated consideration (i) of PHC mixtures based on ECN range and (ii) of model soil properties employed for ecotoxicity testing should be included into PHC-contaminated site risk assessment. -- Highlights: ► Crude oil distillates show distinctly different effects on receptor organisms. ► Toxicity of the higher boiling point Fraction is attributed to physical effects. ► TPH sorption to the organic-matter rich soil occurred immediately after spiking. -- A differentiated consideration of the prevailing crude oil distillation fractions and of model soil properties employed for ecotoxicity testing should be included into the risk assessment of crude oil contaminated sites

Comparison of reduced sugar high quality chocolates sweetened with stevioside and crude stevia 'green' extract.

Science.gov (United States)

Torri, Luisa; Frati, Alessandra; Ninfali, Paolino; Mantegna, Stefano; Cravotto, Giancarlo; Morini, Gabriella

2017-06-01

The demand for zero and reduced-sugar food products containing cocoa is expanding continuously. The present study was designed to evaluate the feasibility of producing high-quality chocolate sweetened with a crude extract of Stevia rebaudiana (Bertoni) prepared by a green microwave-assisted water-steam extraction procedure. Seven approximately isosweet chocolate formulations were developed, mixing cocoa paste, sucrose, commercial stevioside, crude green extract and maltitol in different proportions. All samples were analyzed for the determination of polyphenol and flavonoid content, antioxidant activity, and sensory acceptability. The use of a crude stevia extract allowed low-sugar, high-quality chocolates to be obtained that were also acceptable by consumers and had a significant increased antioxidant activity. Moreover, consumers' segmentation revealed a cluster of consumers showing the same overall liking for the sample with 50% sucrose replaced by the stevia crude extract as that obtained with the commercial stevioside and the control sample (without sucrose replacement). The results provide information that can contribute to promoting the development of sweet food products, with advantages in terms of an improved nutritional value (reduced sugar content and increased antioxidant activity) and a reduced impact of the production process on the environment. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

A study of the effects of enhanced oil recovery agents on the quality of Strategic Petroleum Reserves crude oil. [Physical and chemical interactions of Enhanced Oil Recovery reagents with hydrocarbons present in petroleum

Energy Technology Data Exchange (ETDEWEB)

Kabadi, V.N.

1992-10-01

The project was initiated on September 1, 1990. The objective of the project was to carry out a literature search to estimate the types and extents of long time interactions of enhanced oil recovery (EOR) agents, such as surfactants, caustics and polymers, with crude oil. This information is necessary to make recommendations about mixing EOR crude oil with crude oils from primary and secondary recovery processes in the Strategic Petroleum Reserve (SPR). Data were sought on both adverse and beneficial effects of EOR agents that would impact handling, transportation and refining of crude oil. An extensive literature search has been completed, and the following informations has been compiled: (1) a listing of existing EOR test and field projects; (2) a listing of currently used EOR agents; and (3) evidence of short and long term physical and chemical interactions of these EOR-agents with hydrocarbons, and their effects on the quality of crude oil at long times. This information is presented in this report. Finally some conclusions are derived and recommendations are made. Although the conclusions are based mostly on extrapolations because of lack of specific data, it is recommended that the enhancement of the rates of biodegradation of oil catalyzed by the EOR agents needs to be further studied. There is no evidence of substantial long term effects on crude oil because of other interactions. Some recommendations are also made regarding the types of studies that would be necessary to determine the effect of certain EOR agents on the rates of biodegradation of crude oil.

Dispersing powders in liquids

CERN Document Server

Nelson, RD

1988-01-01

This book provides powder technologists with laboratory procedures for selecting dispersing agents and preparing stable dispersions that can then be used in particle size characterization instruments. Its broader goal is to introduce industrial chemists and engineers to the phenomena, terminology, physical principles, and chemical considerations involved in preparing and handling dispersions on a commercial scale. The book introduces novices to: - industrial problems due to improper degree of dispersion; - the nomenclature used in describing particles; - the basic physica

Utilization of oleo-chemical industry by-products for biosurfactant production

Science.gov (United States)

2013-01-01

Biosurfactants are the surface active compounds produced by micro-organisms. The eco-friendly and biodegradable nature of biosurfactants makes their usage more advantageous over chemical surfactants. Biosurfactants encompass the properties of dropping surface tension, stabilizing emulsions, promoting foaming and are usually non- toxic and biodegradable. Biosurfactants offer advantages over their synthetic counterparts in many applications ranging from environmental, food, and biomedical, cosmetic and pharmaceutical industries. The important environmental applications of biosurfactants include bioremediation and dispersion of oil spills, enhanced oil recovery and transfer of crude oil. The emphasis of present review shall be with reference to the commercial production, current developments and future perspectives of a variety of approaches of biosurfactant production from the micro-organisms isolated from various oil- contaminated sites and from the by-products of oleo-chemical industry wastes/ by-products viz. used edible oil, industrial residues, acid oil, deodorizer distillate, soap-stock etc. PMID:24262384

Crude oil burning mechanisms

DEFF Research Database (Denmark)

van Gelderen, Laurens; Malmquist, L.M.V.; Jomaas, Grunde

2015-01-01

In order to improve predictions for the burning efficiency and the residue composition of in-situ burning of crude oil, the burning mechanism of crude oil was studied in relation to the composition of its hydrocarbon mixture, before, during and after the burning. The surface temperature, flame...... height, mass loss rate and residues of three hydrocarbon liquids (n-octane, dodecane and hexadecane), two crude oils (DUC and REBCO) and one hydrocarbon liquid mixture of the aforementioned hydrocarbon liquids were studied using the Crude Oil Flammability Apparatus. The experimental results were compared...... on the highest achievable oil slick temperature. Based on this mechanism, predictions can then be made depending on the hydrocarbon composition of the fuel and the measured surface temperature....

Methods of analyzing crude oil

Science.gov (United States)

Cooks, Robert Graham; Jjunju, Fred Paul Mark; Li, Anyin; Rogan, Iman S.

2017-08-15

The invention generally relates to methods of analyzing crude oil. In certain embodiments, methods of the invention involve obtaining a crude oil sample, and subjecting the crude oil sample to mass spectrometry analysis. In certain embodiments, the method is performed without any sample pre-purification steps.

7 CFR 29.3015 - Crude.

Science.gov (United States)

2010-01-01

... of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Crude. A subdegree of maturity. Crude leaves are usually hard and slick as a result of extreme immaturity. A similar condition may result from sunburn or sunscald. Any leaf which is crude to the extent of...

Benchmark West Texas Intermediate crude assayed

International Nuclear Information System (INIS)

Rhodes, A.K.

1994-01-01

The paper gives an assay of West Texas Intermediate, one of the world's market crudes. The price of this crude, known as WTI, is followed by market analysts, investors, traders, and industry managers around the world. WTI price is used as a benchmark for pricing all other US crude oils. The 41 degree API < 0.34 wt % sulfur crude is gathered in West Texas and moved to Cushing, Okla., for distribution. The WTI posted prices is the price paid for the crude at the wellhead in West Texas and is the true benchmark on which other US crudes are priced. The spot price is the negotiated price for short-term trades of the crude. And the New York Mercantile Exchange, or Nymex, price is a futures price for barrels delivered at Cushing

Effects of dietary inclusion of high concentrations of crude glycerin on meat quality and fatty acid profile of feedlot fed Nellore bulls.

Directory of Open Access Journals (Sweden)

Eric H C B van Cleef

Full Text Available Crude glycerin, the main by-product of biodiesel production, can replace dietary energy sources, such as corn. The objective of this study was to evaluate the inclusion of up to 30% of crude glycerin in dry matter (DM of the total diets, and its effects on meat quality parameters of feedlot Nellore bulls. Thirty animals (227.7 ± 23.8 kg body weight; 18 months old were housed in individual pens and fed 5 experimental diets, containing 0, 7.5, 15, 22.5 or 30% crude glycerin (DM basis. After 103 d (21 d adaptation animals were slaughtered and the Longissimus muscle was collected. The characteristics assessed were chemical composition, fatty acid profile, cholesterol, shear force, pH, color, water-holding capacity, cooking loss and sensory properties. The increasing inclusion of crude glycerin in the diets did not affect the chemical composition of the Longissimus muscle (P > 0.10. A quadratic effect was observed when levels of crude glycerin were increased, on the concentration of pentadecanoic, palmitoleic and eicosenoic fatty acids in meat (P < 0.05, and on the activity of the delta-9 desaturase 16 and delta-9 desaturase 18 enzymes (P < 0.05. The addition of crude glycerin increased the gamma linolenic fatty acid concentration (P < 0.01, and altered the monounsaturated fatty acids in Longissimus muscle of animals (Pquad. < 0.05. Crude glycerin decreased cholesterol content in meat (P < 0.05, and promoted higher flavor score and greasy intensity perception of the meat (P < 0.01. The inclusion of up to 30% crude glycerin in Nellore cattle bulls`diets (DM basis improves meat cholesterol and sensory attributes, such as flavor, without affecting significantly the physical traits, the main fatty acid concentrations and the chemical composition.

Crude value management through pipeline systems

Energy Technology Data Exchange (ETDEWEB)

Segato, R. [Suncor Energy Marketing Inc., Calgary, AB (Canada)

2009-07-01

This presentation reviewed Suncor's integrated oil flow operations with particular focus on the best practices in crude oil quality management from source rocks to refineries. Suncor produces synthetic crude at its operations in Fort McMurray, Alberta. The crude reaches destinations across North America. The quality of injected and delivered crude varies because of pipeline and terminal logistics, which implies changes in valuation. Refinery planners, engineers and crude traders are faced with the challenge of maximizing profitability while minimizing risk. Refiners face a continuously changing landscape in terms of crude classifications, new commodity developments, batch interferences, shared tank bottoms and sampling limitations. tabs., figs.

15 CFR 754.2 - Crude oil.

Science.gov (United States)

2010-01-01

... processed through a crude oil distillation tower. Included are reconstituted crude petroleum, and lease... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Crude oil. 754.2 Section 754.2....2 Crude oil. (a) License requirement. As indicated by the SS notation in the “License Requirements...

A laboratory dispersant effectiveness test which reflects dispersant efficiency in the field

International Nuclear Information System (INIS)

Lunel, T.; Wood, P.

1996-01-01

Oil dispersion efficiencies of surfactants, from laboratory dispersion tests and field data were compared and calibrated. Data from an oil spill, where dispersants were used as a major part of the response, was analysed. The data was accumulated through the monitoring of the dispersant operation of the Sea Empress spill incident, in which Forties Blend oil was spilled at sea. This detailed data set was used to calibrate existing laboratory dispersant tests, and to devise a new International Dispersant Effectiveness Test. The objective was to create a comprehensive guide to decision making on whether and when to start a dispersant spraying operation. The dispersion efficiencies obtained from the laboratory dispersant tests were compared with field data. Flume tests produced the highest percentage of dispersed oil for all the dispersal tests. However, it was emphasised that the total percentage of oil dispersed should not be the only measure of dispersant effectiveness, since it does not distinguish between the contribution of natural and chemically enhanced dispersion. 9 refs., 1 tab., 9 figs

Nutritional and chemical value of Amaranthus hybridus L. leaves ...

African Journals Online (AJOL)

The nutritional and chemical value of Amaranthus hybridus were investigated using standard analytical methods in order to assess the numerous potential of the plant leaves. The Proximate analysis showed the percentage moisture content, ash content, crude protein, crude lipid, crude fibre and carbohydrate of the leaves ...

De-emulsifiers for water-in-crude oil-emulsions

Energy Technology Data Exchange (ETDEWEB)

Zaki, N. [Egyptian Petroleum Research Inst. (EPRI), Cairo (Egypt); Al-Sabagh, A. [Egyptian Petroleum Research Inst. (EPRI), Cairo (Egypt)

1997-01-01

The efficiency of 18 different polyalkylphenols-polyalkylene-polyamines-formaldehyde ethoxylates (PAPAFE) in the deemulsification of water-in-crude oil-emulsion were studied. In this respect, two naturally occurring Egyptian water-in-curde oil-emulsions were used to test the investigated de-emulsifiers. The effect of the variation in the molecular structure of the (PAPAFE) on their de-emulsification potency is investigated. The investigation reveals that de-emulsifiers containing nonyl phenol reduce crude oil-water interfacial tension (IFT) and are more efficient than those containing dodecyl phenol. PAPAFE containing more amino groups are found to have better emulsion breaking ability. This is attributed to their enhanced ability to solubilize asphaltenes, which are the prime motivators for crude oil-water emulsion stability. They drag asphaltenes crosslinked at the water-crude oil interface and consequently, resulting in a substantial decrease in emulsion stability. There exists an optimum hydrophilic-lipophilic balance (HLB) for the investigated PAPAFE, ranging from 12 to 13.5 at which their maximum de-emulsification ability is attained. All studied PAPAFE showed increased de-emulsification performance by increasing the temperature from 50 to 70 C. Increasing the temperature reduces the viscosity of the crude oil continuous phase and increases the rate of diffusion of both the surfactant molecules and the dispersed water droplets. This will cause an increase in the rate of coalescence of the water droplets. (orig.) [Deutsch] Es wurde die Wirkung von 18 verschiedenen Polyalkylphenolpolyalkylenpolyamine-formaldehydethoxylaten (PAPAFE) bei der Demulgierung von Wasser-in-Rohoel-Emulsionen untersucht. Zwei in Aegypten natuerlich vorkommende Wasser-in-Rohoel-Emulsionen wurden fuer die Versuche eingesetzt, dabei wurde der Einfluss der molekularen Struktur der PAPAFEs auf das Demulgiervermoegen untersucht. Es zeigte sich, dass Demulgatoren mit Nonylphenol die

Experimental studies of thermal and chemical interactions between molten aluminum and nuclear dispersion fuels with water

International Nuclear Information System (INIS)

Farahani, A.A.

1997-01-01

Because of the possibility of rapid physical and chemical molten fuel-water interactions during a core melt accident in noncommercial or experimental reactors, it is important to understand the interactions that might occur if these materials were to contact water. An existing vertical 1-D shock tube facility was improved and a gas sampling device to measure the gaseous hydrogen in the upper chamber of the shock tube was designed and built to study the impact of a water column driven downward by a pressurized gas onto both molten aluminum (6061 alloy) and oxide and silicide depleted nuclear dispersion fuels in aluminum matrices. The experiments were carried out with melt temperatures initially at 750 to 1,000 C and water at room temperature and driving pressures of 0.5 and 1 MPa. Very high transient pressures, in many cases even larger than the thermodynamic critical pressure of the water (∼ 20 MPa), were generated due to the interactions between the water and the crucible and its contents. The molten aluminum always reacted chemically with the water but the reaction did not increase consistently with increasing melt temperature. An aluminum ignition occurred when water at room temperature impacted 28.48 grams of molten aluminum at 980.3 C causing transient pressures greater than 69 MPa. No signs of aluminum ignition were observed in any of the experiments with the depleted nuclear dispersion fuels, U 3 O 8 -Al and U 3 Si 2 -Al. The greater was the molten aluminum-water chemical reaction, the finer was the debris recovered for a given set of initial conditions. Larger coolant velocities (larger driving pressures) resulted in more melt fragmentation but did not result in more molten aluminum-water chemical reaction. Decreasing the water temperature also resulted in more melt fragmentation and did not suppress the molten aluminum-water chemical reaction

A laboratory approach for determining the effect of oils and dispersants on mangroves

Energy Technology Data Exchange (ETDEWEB)

Baca, B.J.

1982-10-01

An experimental approach was developed and applied to testing the effects of oil and dispersant combinations on the growth of mangrove seedlings (trees of the intertidal tropics). A controlled growth chamber was employed to test the effects of different oils and dispersed oils in an array of dosages applied to different parts of the plants. Preliminary test results are reported for two species of mangroves collected from five localities, including both oiled and unoiled estuaries. Differences occurred between species, substances, dosages, the part of the plant dosed, and the presence of chronic oil pollution at localities from which the stocks were collected. Avicennia germinans (L.) L. (black mangrove) was more sensitive than Rhizophora mangle L. (red mangrove) when exposed to almost all substances tested. Light Arabian crude oil (LA) and light Arabian crude oil dispersed (LAD) were the most toxic substances tested. No. 2 fuel oil (N2) and No. 2 fuel oil dispersed (N2D) were as toxic as LA and LAD, except for an increase (an enhancement effect) in foliage and stem growth in Avicennia at lower dosages. Bunker C oil (BC) was the least toxic of the oils tested, resulting in the reduction of foliage and stem growth only at the highest dosage tested in Avicennia. Bunker C oil dispersed (BCD) failed to show effects in either species at any dosage tested. The leaves of Rhizophora were the most sensitive part of the plant tested.

Research on a dispersing solution for burnt crude oils: Aegean Sea oil spill

International Nuclear Information System (INIS)

Bergueiro, J.R.; Morales, N.; Dominguez, F.

1993-01-01

The oil tanker Aegean Sea spilled oil when it grounded during severe storm conditions near La Coruna, Spain. Much of the oil burned after an explosion was caused by the hull breaking apart. Oil which contaminated several beaches was affected by both combustion and weathering. Experiments were conducted on oil sampled from the beaches to investigate dispersion of the oil using Beep Enersperse 1990 at different shaking speeds. Biodegradation experiments were also conducted in the presence of Beep Enersperse 1990 but with seawater absent. Although emulsification of the burnt and weathered oil was very difficult, good dispersion and biodegradation were obtained. After 42 d in a stirred reactor, biodegradation of the oil reached at least 80%. 3 refs., 3 figs., 4 tabs

Comparison of crude oil interfacial behavior

Energy Technology Data Exchange (ETDEWEB)

Beetge, J.H.; Panchev, N. [Champion Technologies Inc., Fresno, TX (United States)

2008-07-01

The bulk properties of crude oil are used to predict its behaviour with regards to treatment, transport and processing. Surface active components, such as asphaltenes, are often used to study or explain critical interfacial behaviour of crude oil. This study investigated the differences and similarities in the interfacial behaviour of the collective surface active component in various crude oils from different sources. The properties of interfaces between crude oil and water were compared using a Teclis drop shape tensiometer. A portion of a crude oil sample was diluted in toluene and contacted with water in a rising drop configuration. Dynamic surface tension and interfacial rheology was examined as a function of time from the early stages of interface formation. Sinusoidal oscillation of the drop volume allowed for the evaluation of visco-elastic behaviour of the crude oil/water interface as it developed with time. The Gibbs elastic modulus, as well as its elastic and viscose components were calculated from the drop shape. The interfacial behaviour was expressed in terms of concentration, oscillation frequency and interface age. It was concluded that knowledge of crude oil interfacial character could be of value in the treatment, transport and processing of crude oils because the its behaviour may play a significant role in crude oil production and processing.

Hydrothermal Liquefaction Biocrude Compositions Compared to Petroleum Crude and Shale Oil

Energy Technology Data Exchange (ETDEWEB)

Jarvis, Jacqueline M.; Billing, Justin M.; Hallen, Richard T.; Schmidt, Andrew J.; Schaub, Tanner M.

2017-02-17

We provide a direct and detailed comparison of the chemical composition of petroleum crude oil (from the Gulf of Mexico), shale oil, and three biocrudes (i.e., clean pine, microalgae Chlorella sp., and sewage sludge feedstocks) generated by hydrothermal liquefaction (HTL). Ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) reveals that HTL biocrudes are compositionally more similar to shale oil than petroleum crude oil and that only a few heteroatom classes (e.g., N1, N2, N1O1, and O1) are common to organic sediment- and biomass-derived oils. All HTL biocrudes contain a diverse range of oxygen-containing compounds when compared to either petroleum crude or shale oil. Overall, petroleum crude and shale oil are compositionally dissimilar to HTL oils, and >85% of the elemental compositions identified within the positive-ion electrospray (ESI) mass spectra of the HTL biocrudes were not present in either the petroleum crude or shale oil (>43% for negative-ion ESI). Direct comparison of the heteroatom classes that are common to both organic sedimentand biomass-derived oils shows that HTL biocrudes generally contain species with both smaller core structures and a lower degree of alkylation relative to either the petroleum crude or the shale oil. Three-dimensional plots of carbon number versus molecular double bond equivalents (with observed abundance as the third dimension) for abundant molecular classes reveal the specific relationship of the composition of HTL biocrudes to petroleum and shale oils to inform the possible incorporation of these oils into refinery operations as a partial amendment to conventional petroleum feeds.

Hopane, a new chemical tool for measuring oil biodegradation

International Nuclear Information System (INIS)

Butler, E.L.; Douglas, G.S.; Steinhauer, W.G.; Prince, R.C.; Aczel, T.; Hsu, C.S.; Bronson, M.T.; Clark, J.R.; Lindstrom, J.E.

1991-01-01

The ability to determine the fate of spilled oil in the environment is critically dependent on an understanding of natural oil degradation processes. Immediately after an oil spill, physical weathering such as evaporation, dispersion and solubilization alter the chemical, physical, and toxicological properties of the spilled product. After this initial weathering, microbial degradation is the principal route for the eventual removal of oil from the environment. A joint Bioremediation Monitoring Program employed a novel approach in characterizing and quantifying the rate of oil biodegradation on selected beaches of Prince William Sound. Hopanes, a class of polycyclic alkanes that are water-insoluble and extremely resistant to biodegradation, were used as an internal oil reference to quantify the depletion of crude oil and its individual components in oiled beach sediments. The depletions of total oil and individual oil components were calculated relative to 30 percent depleted Prudhoe Bay crude oil, a reference material that approximates the composition of the spilled oil that landed on the beaches. In this paper, traditional weathering indicators such as C 18 /phytane, C 17 /pristane, and the aromatic weathering ratio were compared to the hopane oil degradation indicator

Exports of crude oil, 1988

International Nuclear Information System (INIS)

1989-06-01

Effective June 1, 1985, licensing and charging of oil exports ended. The Board now issues export orders specifying neither volumes nor prices and covering an exportation period of up to 1 year for light crude oil and up to 2 years for heavy crude oil, available on request to both Canadian and foreign companies. The Board has assumed a monitoring role, and export prices and volumes are reported monthly by exporters. This annual report provides a review of the volumes and prices associated with the supply and disposition of Canadian crude oil during 1988. Highlights are given with detailed information on prices, both internationally, in Canada, and the Chicago posted price by light or heavy crude, and on volumes including capacity and disposition in both domestic and export markets. A short description of the import market is included. Comparisons are made with the previous year. Export volumes of light crude oil in 1988 increased by 13% to average 50,200 m 3 /d. Export volumes of heavy crude also increased by ca 13% to 62,600 m 3 /d. 15 figs., 2 tabs

Effect of mechanical and chemical clay removals by hydrocyclone and dispersants on coal flotation

Energy Technology Data Exchange (ETDEWEB)

Oats, W.J.; Ozdemir, O.; Nguyen, A.V. [University of Queensland, Brisbane, Qld. (Australia). School of Chemical Engineering

2010-04-15

Fine minerals, mostly clays, are known to have a detrimental effect on coal flotation. This paper focuses on the effect of mechanical and chemical removals of fine minerals by hydrocyclone and dispersants on coal flotation. The experimental results showed that the flotation recovery slightly increased from medium acidic to medium alkaline ranges. The flotation experiments carried out with dispersants at different dosages showed that the dispersants did not enhance the flotation recovery significantly. However, the removal of the fine fraction from the feed using a hydrocyclone significantly increased the flotation recovery. The bubble-particle attachment tests also indicated that the attachment time between an air bubble and the coal particles increased in the presence of clay particles. These attachment time results clearly showed that the clay particles adversely affected the flotation of coal particles by covering the coal surfaces which reduced the efficiency of bubble-coal attachment. An analysis based on the colloid stability theory showed that the clay coating was governed by the van der Waals attraction and that the double-layer interaction played a secondary role. It was also concluded that the best way to increase the flotation recovery in the presence of clays was to remove these fine minerals by mechanical means such as hydrocylones.

Formulation of best-fit hydrophile/lipophile balance-dielectric permittivity demulsifiers for treatment of crude oil emulsions

Directory of Open Access Journals (Sweden)

C.M. Ojinnaka

2016-12-01

Full Text Available The commerce of crude oil depends heavily on its water and salt contents usually referred to as Basic Sediments and Water (BS&W, which is co-produced with the crude oil in the form of emulsion. The lower the BS&W, the higher the market value of the crude. The presence of water in crude oil causes corrosion, lowers capacity utilization of production and processing plant parts and pipelines, reduces oil recovery and increases the oil content of the effluent water. The stabilizing factors of crude oil emulsions vary from one oil field to the other and with time in the same well as co-produced water increases, or after a well treatment and Enhanced Oil Recovery Operations (EOR. Periodical assessment and possible change of demulsifiers employed is therefore necessary at certain stages of crude oil productions, but this is not encouraged due to lack of general formulation procedures and the rigorous nature of bottle test method that is currently being used for assessment and selection. In this paper, the factors that affect the stability of crude oil emulsions are presented. Efforts of researchers in formulating demulsifiers based on these factors and their screening methods were reviewed. The context sets the stage for further exploration of possible relationship(s between the physical parameters of the crude oil and the demulsifiers, and exploiting same in the formulation of new demulsifiers capable of resolving crude oil emulsions using chemicals with improved surface activity and crude extracts of indigenous plants.

NUMERICAL SIMULATION OF TOXIC CHEMICAL DISPERSION AFTER ACCIDENT AT RAILWAY

Directory of Open Access Journals (Sweden)

M. M. Biliaiev

2016-04-01

Full Text Available Purpose. This research focuses on the development of an applied numerical model to calculate the dynamics of atmospheric pollution in the emission of dangerous chemical substances in the event of transportation by railway. Methodology. For the numerical simulation of transport process of the dangerous chemical substance in the atmosphere the equation of convection-diffusion pollutant transport is used. This equation takes into account the effect of wind, atmospheric diffusion, the power of emission source, as well as the movement of the source of emission (depressurized tank on the process of pollutant dispersion. When carrying out computing experiment one also takes into account the profile of the speed of the wind flow. For the numerical integration of pollutant transport in the atmosphere implicit finite-difference splitting scheme is used. The numerical calculation is divided into four steps of splitting and at each step of splitting the unknown value of the concentration of hazardous substance is determined by the explicit running account scheme. On the basis of the numerical model it was created the code using the algorithmic language FORTRAN. One conducted the computational experiments to assess the level of air pollution near the railway station «Illarionovo» in the event of a possible accident during transportation of ammonia. Findings. The proposed model allows you to quickly calculate the air pollution after the emission of chemically hazardous substance, taking into account the motion of the emission source. The model makes it possible to determine the size of the land surface pollution zones and the amount of pollutants deposited on a specific area. Using the developed numerical model it was estimated the environmental damage near the railway station «Illarionovo». Originality. One can use the numerical model to calculate the size and intensity of the chemical contamination zones after accidents on transport. Practical value

Effects of temperature and wave conditions on chemical dispersion efficacy of heavy fuel oil in an experimental flow-through wave tank.

Science.gov (United States)

Li, Zhengkai; Lee, Kenneth; King, Thomas; Boufadel, Michel C; Venosa, Albert D

2010-09-01

The effectiveness of chemical dispersants (Corexit 9500 and SPC 1000) on heavy fuel oil (IFO180 as test oil) has been evaluated under different wave conditions in a flow-through wave tank. The dispersant effectiveness was determined by measuring oil concentrations and droplet size distributions. An analysis of covariance (ANCOVA) model indicated that wave type and temperature significantly (p or = 400 microm). Copyright 2010 Elsevier Ltd. All rights reserved.

Dispersibility and chemical bonds between multi-walled carbon nanotubes and poly(ether ether ketone) in nanocomposite fibers

International Nuclear Information System (INIS)

Yanmei, Jin; Haihui, Liu; Ning, Wang; Lichen, Hou; Xing-Xiang, Zhang

2012-01-01

A series of multi-walled carbon nanotubes (MWNTs)/poly(ether ether ketone)(PEEK) nanocomposite fibers were fabricated by mixing, melt extruding PEEK with different loadings and species of MWNTs, and melt-spun the blended chips. Nanocomposite fibers were heat-stretched and heat-treated. The morphology and dispersibility of MWNTs in nanocomposite fibers were observed using a field emission environmental scanning electron microscope (FESEM) and a transmission electron microscope (TEM). The thermal and crystallization behavior of nanocomposite fibers were characterized using differential scanning calorimetry (DSC) and an X-ray diffractometer (XRD). Mechanical properties were tested using a tensile strength tester. MWNTs tend to aggregate when the loading exceeds 0.8 wt%. Functional groups on MWNTs improve the hydrophobicity and the dispersibility of MWNTs in PEEK matrix. The enhancement of mechanical properties depends on the loading and species of functional groups. The most effectively reinforced effect is in the sequence, carboxylic MWNTs (MWNT–COOH) > hydroxyl MWNTs (MWNT–OH) > MWNTs, which can be explained by the strong hydrogen bonding and the affinity between MWNT–COOH and PEEK, MWNT–OH and PEEK, and possible formation of a chemical bond between MWNT–COOH and PEEK. A nanocomposite fiber with excellent mechanical property was fabricated using 0.8 wt% MWNT–COOH as filler. The Young's modulus is 1.7 GPa; and the stress is 648 MPa. -- Highlights: ► Functional groups on MWNTs improve their hydrophobility and dispersability. ► Mechanical properties depend on the content and species of the functional groups. ► The reinforced effect is in the sequence, carboxylic MWNTs > hydroxyl MWNTs > MWNTs. ► The strength behavior was result of hydrogen bond, affinity and chemical bond. ► Dispersability of MWNTs in matrix was analyzed by calculating solubility parameter.

Crude oil market report

Energy Technology Data Exchange (ETDEWEB)

1985-01-01

Falling demand for refined products and an excess of production capacity are driving world oil prices down further. Competitive price cutting, notably by Mexico, Britain, and the Soviet Union, has left Saudi Arabia the only guardian of a costly pricing discipline in terms of crude oil sales. The current crisis is limited to the producers of crude oil. Refineries are now deciding what, where, and how to buy crude in order to meet the requirements of a slack market place. Saudi Arabia could precipitate a price collapse below $20 per barrel by increasing production volume, but that seems unlikely. 1 figure, 2 tables.

Error estimation and global fitting in transverse-relaxation dispersion experiments to determine chemical-exchange parameters

International Nuclear Information System (INIS)

Ishima, Rieko; Torchia, Dennis A.

2005-01-01

Off-resonance effects can introduce significant systematic errors in R 2 measurements in constant-time Carr-Purcell-Meiboom-Gill (CPMG) transverse relaxation dispersion experiments. For an off-resonance chemical shift of 500 Hz, 15 N relaxation dispersion profiles obtained from experiment and computer simulation indicated a systematic error of ca. 3%. This error is three- to five-fold larger than the random error in R 2 caused by noise. Good estimates of total R 2 uncertainty are critical in order to obtain accurate estimates in optimized chemical exchange parameters and their uncertainties derived from χ 2 minimization of a target function. Here, we present a simple empirical approach that provides a good estimate of the total error (systematic + random) in 15 N R 2 values measured for the HIV protease. The advantage of this empirical error estimate is that it is applicable even when some of the factors that contribute to the off-resonance error are not known. These errors are incorporated into a χ 2 minimization protocol, in which the Carver-Richards equation is used fit the observed R 2 dispersion profiles, that yields optimized chemical exchange parameters and their confidence limits. Optimized parameters are also derived, using the same protein sample and data-fitting protocol, from 1 H R 2 measurements in which systematic errors are negligible. Although 1 H and 15 N relaxation profiles of individual residues were well fit, the optimized exchange parameters had large uncertainties (confidence limits). In contrast, when a single pair of exchange parameters (the exchange lifetime, τ ex , and the fractional population, p a ), were constrained to globally fit all R 2 profiles for residues in the dimer interface of the protein, confidence limits were less than 8% for all optimized exchange parameters. In addition, F-tests showed that quality of the fits obtained using τ ex , p a as global parameters were not improved when these parameters were free to fit the R

Crude oil spot market pricing: Pearsonian analysis of crude oil spot market prices

International Nuclear Information System (INIS)

Akinnusi, Ayo

1994-01-01

This paper presents a brief overview of crude oil pricing before describing a study of sets of 1991 spot market prices, and examining Pearson's model. Empirical distribution characteristics for 14 crude oils are tabulated, and skewness-kurtosis relationship and implication are considered. (UK)

Classification of weathered crude oils

International Nuclear Information System (INIS)

Vogt, N.B.; Sjoegren, C.E.; Lichtenthaler, G.

1987-01-01

The NORDTEST procedure (1) for oil spill identification has been applied successfully at several occasions. The NORDTEST procedure includes analyses of sulfur (XRF), vanadium and nickel (ICP/AAS), GC, HPLC and UV-fluorescence. The NORDTEST procedure does not include GC-MS as an analytical method. As part of a joint Nordic to evaluate the NORDTEST procedure for oil identification, with participants from Denmark, Sweden, Finland and Norway, thirty artificially weathered crude oils from four geographical regions have been analyzed (2). The analytical methods evaluated include sulfur analysis, vanadium and nickel analysis, infrared analysis, UV-fluorescence, gas chromatography, high pressure liquid chromatography and high resolution GC-mass spectrometry. Figure 1 shows the distribution of variables analyzed in each analytical method. The 190 variables from GC-MS were split into 7 groups according to chemical considerations. These were steranes (25 var.), triterpanes (16 var.), di(+)aromatics (63 var.), sulf. aromatics (30 var.), monoaromatics (19 var.), cycloalkanes (15 var.) and n-alkanes (22) variables. The data from these chemical analyses have been evaluated for use in oil spill identification purposes

Characterisation of crude oil components, asphaltene aggregation and emulsion stability by means of near infrared spectroscopy and multivariate analysis

Energy Technology Data Exchange (ETDEWEB)

Aske, Narve

2002-06-01

Effective separation of water-in-crude oil emulsions is a central challenge for the oil industry on the Norwegian Continental Shelf, especially with the future increase in subsea and even down-hole processing of well fluids. The mechanisms and properties governing emulsion stability are far from fully understood but the indigenous surface active crude oil components are believed to play a major role. In this work a thorough physico-chemical characterisation of a set of crude oils originating from a variety of production fields has been performed. Crude oil properties responsible for emulsion stability were identified by use of multivariate analysis techniques like partial least squares regression (PLS) and principal component analysis (PCA). Interfacial elasticity along with both asphaltene content and asphaltene aggregation state were found to be main contributors to emulsion stability. Information on a crude oils ability to form elastic crude oil-water interfaces was found to be especially crucial when discussing emulsion stability. However, measured values of interfacial elasticity were highly dependent on asphaltene aggregation state. Several experimental techniques was utilised and partly developed for the crude oil characterisation. A high-pressure liquid chromatography (HPLC) scheme was developed for SARA-fractionation of crude oils and an oscillating pendant drop tensiometer was used for characterisation of interfacial rheological properties. For emulsion stability a cell for determining the stability as a function of applied electric fields was used. In addition, near infrared spectroscopy (NIR) was used throughout the work both for chemical and physical characterisation of crude oils and model systems. High pressure NIR was used to study the aggregation of asphaltenes by pressure depletion. A new technique for detection of asphaltene aggregation onset pressures based on NIR combined with PCA was developed. It was also found that asphaltene aggregation is

Main points of research in crude oil processing and petrochemistry. [German Democratic Republic

Energy Technology Data Exchange (ETDEWEB)

Keil, G.; Nowak, S.; Fiedrich, G.; Klare, H.; Apelt, E.

1982-04-01

This article analyzes general aspects in the development of petrochemistry and carbochemistry on a global scale and for industry in the German Democratic Republic. Diagrams are given for liquid and solid carbon resources and their natural hydrogen content showing the increasing hydrogen demand for chemical fuel conversion processes. The petrochemical and carbochemical industry must take a growing level of hydrogen demand into account, which is at present 25 Mt/a on a global scale and which increases by 7% annually. Various methods for chemical processing of crude oil and crude oil residues are outlined. Advanced coal conversion processes with prospects for future application in the GDR are also explained, including the methanol carbonylation process, which achieves 90% selectivity and which is based on carbon monoxide hydrogenation, further the Transcat process, using ethane for vinyl chloride production. Acetylene and carbide carbochemistry in the GDR is a further major line in research and development. Technological processes for the pyrolysis of vacuum gas oil are also evaluated. (27 refs.)

Enzymatic lipophilization of epicatechin with free fatty acids and its effect on antioxidative capacity in crude camellia seed oil.

Science.gov (United States)

Chen, Sa-Sa; Luo, Shui-Zhong; Zheng, Zhi; Zhao, Yan-Yan; Pang, Min; Jiang, Shao-Tong

2017-02-01

Crude camellia seed oil is rich in free fatty acids, which must be removed to produce an oil of acceptable quality. In the present study, we reduced the free fatty acid content of crude camellia seed oil by lipophilization of epicatechin with these free fatty acids in the presence of Candida antarctica lipase B (Novozym 435), and this may enhance the oxidative stability of the oil at the same time. The acid value of crude camellia seed oil reduced from 3.7 to 2.5 mgKOH g -1 after lipophilization. Gas chomatography-mass spectrometry analysis revealed that epicatechin oleate and epicatechin palmitate were synthesized in the lipophilized oil. The peroxide, p-anisidine, and total oxidation values during heating of the lipophilized oil were much lower than that of the crude oil and commercially available camellia seed oil, suggesting that lipophilized epicatechin derivatives could help enhance the oxidative stability of edible oil. The enzymatic process to lipophilize epicatechin with the free fatty acids in crude camellia seed oil described in the present study could decrease the acid value to meet the quality standards for commercial camellia seed oil and, at the same time, obtain a new edible camellia seed oil product with good oxidative stability. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

THE STUDYING OF COLLOIDAL-CHEMICAL PROPERTIES OF CLAY MINERALS DISPERSIONS

Directory of Open Access Journals (Sweden)

A. F. Tymchuk

2015-02-01

Full Text Available The element structure is studied, the microscopic analysis of fine-dispersed min­eral systems (ground sediments of a mouth of the river Danube is carried out. The sedimentation process of clay minerals dispersions in solutions of surfactants and macromolecular substances is studied. Concentration intervals of stabilization of investigating dispersions were defined.

Emissions of polycyclic aromatic hydrocarbons from the combustion of crude oil on water

International Nuclear Information System (INIS)

Benner, B.A. Jr.; Bryner, N. P.; Wise, S.A.; Mulholland, G.W.; Evans, D.D.; Fingas, M.F.; Li, K.

1991-01-01

A study was conducted to examine some of the factors necessary to assess the environmental impact of an in-situ burn of an oil spill on water. These factors include the fraction of an oil layer which can be burned, the quantity of smoke emitted, and the concentrations of 18 polycyclic aromatic hydrocarbons (PAHs) in the smoke, crude oil, and burn residue. Alberta sweet mixed blend crude in 1, 3, 5, 10, and 30 mm layers on water was burned in the laboratory and smoke samples were collected at elevated and ambient temperatures and analyzed by two independent laboratories. While burning the crude oil produced less total PAHs than was in the original crude, the concentrations of PAHs with 5 or more rings were 10-20 times greater in the smoke than in the oil. The organic carbon fraction of the smoke was in the 14-21% range. As the fuel layer thickness was increased from 2 to 10 mm, the smoke yield increased from 0.035 g smoke/g fuel and the percentage of oil residue decreased from 46% to 17%. By consuming much of the oil spill and reducing the amount of PAHs in the water, and by dispersing the combustion products over a larger area, in-situ burning can mitigate the local environmental impact of an oil spill. There appears to be a range of situations, such as in Arctic ice fields, where in-situ burning might be the most viable cleanup method. 25 refs., 6 figs., 6 tabs

Discobiol program : investigation of dispersant use in coastal and estuarine waters

Energy Technology Data Exchange (ETDEWEB)

Merlin, F.X.; Le Floch, S.; Dussauze, M. [Cedre, Brest Cedex (France); Theron, M. [Brest Univ., European University of Britanny, Rennes (France); Quentel, C. [AFSSA, French Food Safety Agency, Paris (France); Thomas, H. [LIENS, CNRS-Univ. of La Rochelle, La Rochelle Cedex (France)

2009-07-01

This paper reported on the Discobiol work program designed to acquire comparable information on the impact of mechanically and chemically dispersed oil on different habitats and resources, particularly in estuaries or close to bays. The study involved 3 phases for the analysis of lethal and sub-lethal effects in pelagic and benthic communities, notably organisms in the water column, mudflats and salt marshes. The ultimate objective was to use the information to make recommendations regarding the use of dispersants in these 3 areas. Dispersants are known to be effective for offshore oil spill response when dilution conditions are high and dispersed oil concentrations decrease rapidly below levels that could harm the environment. However, dilution can be restricted in coastal areas, thus limiting the use of dispersant. All the tests conducted in this study were conducted using brut Arabian light oil that was pre-evaporated to simulate realistic conditions. The study examined whether the presence of oil leads to different effects than the control and whether the chemically dispersed oil gave different effects than the mechanical dispersion. The comparison with chemical dispersion in clear sea water examined whether the presence of suspended materials change the effect of the chemical dispersion. Results for the different phases of the project were presented. The preliminary results tend to open the use of chemical dispersion of oil slicks in coastal areas. The mixture of dispersant plus oil seems to be less detrimental than oil alone, particularly for turbot. The final conclusion regarding chemical dispersion of oil slicks in coastal areas will have to be formulated at the end of the project because coastal ecosystems depend on biotic and abiotic factors. The final phase will take place in a realistic environment in a salt marsh ecosystem at La Rochelle, France. 6 refs., 6 tabs., 6 figs.

Discobiol program : investigation of dispersant use in coastal and estuarine waters

International Nuclear Information System (INIS)

Merlin, F.X.; Le Floch, S.; Dussauze, M.; Theron, M.; Quentel, C.; Thomas, H.

2009-01-01

This paper reported on the Discobiol work program designed to acquire comparable information on the impact of mechanically and chemically dispersed oil on different habitats and resources, particularly in estuaries or close to bays. The study involved 3 phases for the analysis of lethal and sub-lethal effects in pelagic and benthic communities, notably organisms in the water column, mudflats and salt marshes. The ultimate objective was to use the information to make recommendations regarding the use of dispersants in these 3 areas. Dispersants are known to be effective for offshore oil spill response when dilution conditions are high and dispersed oil concentrations decrease rapidly below levels that could harm the environment. However, dilution can be restricted in coastal areas, thus limiting the use of dispersant. All the tests conducted in this study were conducted using brut Arabian light oil that was pre-evaporated to simulate realistic conditions. The study examined whether the presence of oil leads to different effects than the control and whether the chemically dispersed oil gave different effects than the mechanical dispersion. The comparison with chemical dispersion in clear sea water examined whether the presence of suspended materials change the effect of the chemical dispersion. Results for the different phases of the project were presented. The preliminary results tend to open the use of chemical dispersion of oil slicks in coastal areas. The mixture of dispersant plus oil seems to be less detrimental than oil alone, particularly for turbot. The final conclusion regarding chemical dispersion of oil slicks in coastal areas will have to be formulated at the end of the project because coastal ecosystems depend on biotic and abiotic factors. The final phase will take place in a realistic environment in a salt marsh ecosystem at La Rochelle, France. 6 refs., 6 tabs., 6 figs.

Quantification of isomerically summed hydrocarbon contributions to crude oil by carbon number, double bond equivalent, and aromaticity using gas chromatography with tunable vacuum ultraviolet ionization.

Science.gov (United States)

Nowak, Jeremy A; Weber, Robert J; Goldstein, Allen H

2018-03-12

The ability to structurally characterize and isomerically quantify crude oil hydrocarbons relevant to refined fuels such as motor oil, diesel, and gasoline represents an extreme challenge for chromatographic and mass spectrometric techniques. This work incorporates two-dimensional gas chromatography coupled to a tunable vacuum ultraviolet soft photoionization source, the Chemical Dynamics Beamline 9.0.2 of the Advanced Light Source at the Lawrence Berkeley National Laboratory, with a time-of-flight mass spectrometer (GC × GC-VUV-TOF) to directly characterize and isomerically sum the contributions of aromatic and aliphatic species to hydrocarbon classes of four crude oils. When the VUV beam is tuned to 10.5 ± 0.2 eV, both aromatic and aliphatic crude oil hydrocarbons are ionized to reveal the complete chemical abundance of C 9 -C 30 hydrocarbons. When the VUV beam is tuned to 9.0 ± 0.2 eV only aromatic hydrocarbons are ionized, allowing separation of the aliphatic and aromatic fractions of the crude oil hydrocarbon chemical classes in an efficient manner while maintaining isomeric quantification. This technique provides an effective tool to determine the isomerically summed aromatic and aliphatic hydrocarbon compositions of crude oil, providing information that goes beyond typical GC × GC separations of the most dominant hydrocarbon isomers.

Implications of globalization on pricing for Canadian crudes

Energy Technology Data Exchange (ETDEWEB)

Black, R. [Canadian Occidental Petroleum Ltd., Calgary, AB (Canada)

1998-05-01

The effects of globalization on Canadian crude oil prices was discussed. Since deregulation in October 1985, Canadian crude oil has competed directly against international crude oil through the use of the NYMEX contract price for light sweet crude oil as the base for establishing the price for Canadian crudes. Prior to that date, Alberta crude was marketed by the Alberta Petroleum Marketing Commission using the old block matrix which was loosely tied to the world market price. In addition to world crude oil prices other factors that affect the price of Canadian crude oil include technology impacts and global integration. Also, when the Sarnia to Montreal pipeline (Line 9) is reversed to bring offshore crude oil into the Ontario refining community, Canadian producers can expect some adverse effects on the price they are paid for their products leading up to the reversal as refiners start to swing over to their alternate suppliers. The offshore supply is expected to be about 140,000 barrels/day of light sweet crude oil, but all grades of Canadian crude oil will be affected.

Naphthenic acids hydrates of gases: influence of the water/oil interface on the dispersing properties of an acidic crude oil; Acides naphteniques hydrates de gaz de l'interface eau/huile sur les proprietes dispersantes d'un brut acide

Energy Technology Data Exchange (ETDEWEB)

Arla, D.

2006-01-15

Nowadays, the development of offshore oil production under increasing water depths (high pressures and low temperatures) has led oil companies to focus on gas hydrates risks. Hydrates are crystals containing gas and water molecules which can plug offshore pipelines. It has been shown that some asphaltenic crude oils stabilize water-in-oil emulsions (W/O) during several months and exhibit very good anti-agglomerant properties avoiding hydrate plugs formation. In this work, we have studied the 'anti-hydrate' properties of a West African acidic crude oil called crude AH. This oil contains naphthenic acids, RCOOH hydrocarbons which are sensitive to both the pH and the salinity of the water phase.The emulsifying properties of the crude AH have firstly been explored. It has been shown that heavy resins and asphaltenes are the main compounds of the crude AH responsible for the long term stability of the W/O emulsions whereas the napthenates RCOO{sup -} lead to less stable W/O emulsions. Dealing with hydrates, the crude AH exhibits moderate anti-agglomerant properties due to the presence of heavy resins and asphaltenes. However, the naphthenates RCOO{sup -} drastically increase the formation of hydrate plugs. Moreover, it has been pointed out that hydrate particles agglomeration accelerates the kinetics of hydrate formation and enhances the water/oil separation. In order to explain these behaviours, a mechanism of agglomeration by 'sticking' between a hydrate particle and a water droplet has been proposed. Finally, we have developed a model which describes the physico-chemical equilibria of the naphthenic acids in the binary system water/crude AH, in order to transpose the results obtained in the laboratory to the real oil field conditions. (author)

Compost and Crude Humic Substances Produced from Selected Wastes and Their Effects on Zea mays L. Nutrient Uptake and Growth

Science.gov (United States)

Palanivell, Perumal; Susilawati, Kasim; Ahmed, Osumanu Haruna; Majid, Nik Muhamad

2013-01-01

Production of agriculture and timber commodities leads generation of enormous quantity of wastes. Improper disposal of these agroindustrial wastes pollutes the environment. This problem could be reduced by adding value to them. Therefore, a study was carried out to analyse and compare the nutrients content of RS, RH, SD, and EFB of composts and crude humic substances; furthermore, their effect on growth, dry matter production, and nutrient uptake for Zea mays L., and selected soil chemical properties were evaluated. Standard procedures were used to analyze humic acids (HA), crude fulvic acids (CFA), crude humin (CH), soil, dry matter production and nutrient uptake. Sawdust and RS compost matured at 42 and 47 days, respectively, while RH and EFB composts were less matured at 49th day of composting. Rice straw compost had higher ash, N, P, CEC, HA, K, and Fe contents with lower organic matter, total organic carbon, and C/N and C/P ratios. The HA of sawdust compost showed higher carbon, carboxylic, K, and Ca contents compared to those of RS, RH, and EFB. Crude FA of RS compost showed highest pH, total K, Ca, Mg, and Na contents. Crude humin from RS compost had higher contents of ash, N, P, and CEC. Rice straw was superior in compost, CFA, and CH, while sawdust compost was superior in HA. Application of sawdust compost significantly increased maize plants' diameter, height, dry matter production, N, P, and cations uptake. It also reduced N, P, and K based chemical fertilizer use by 90%. Application of CH and the composts evaluated in this study could be used as an alternative for chemical fertilizers in maize cultivation. PMID:24319353

Improved new generation dispersants

International Nuclear Information System (INIS)

Anon.

1993-01-01

The use of dispersants to combat oil spills has attracted controversy over the years, and there has been a number of accusations of the chemicals involved doing more harm than good. A new study by the International Petroleum Industry Environmental Conservation Association discusses the positive and the negatives of dispersant use to be considered when drawing up spill contingency plans. (author)

Production of Flocculants, Adsorbents, and Dispersants from Lignin.

Science.gov (United States)

Chen, Jiachuan; Eraghi Kazzaz, Armin; AlipoorMazandarani, Niloofar; Hosseinpour Feizi, Zahra; Fatehi, Pedram

2018-04-10

Currently, lignin is mainly produced in pulping processes, but it is considered as an under-utilized chemical since it is being mainly used as a fuel source. Lignin contains many hydroxyl groups that can participate in chemical reactions to produce value-added products. Flocculants, adsorbents, and dispersants have a wide range of applications in industry, but they are mainly oil-based chemicals and expensive. This paper reviews the pathways to produce water soluble lignin-based flocculants, adsorbents, and dispersants. It provides information on the recent progress in the possible use of these lignin-based flocculants, adsorbents, and dispersants. It also critically discusses the advantages and disadvantages of various approaches to produce such products. The challenges present in the production of lignin-based flocculants, adsorbents, and dispersants and possible scenarios to overcome these challenges for commercial use of these products in industry are discussed.

Demulsification of crude oil-in-water emulsions by means of fungal spores.

Directory of Open Access Journals (Sweden)

Alba Adriana Vallejo-Cardona

Full Text Available The present feature describes for the first time the application of spores from Aspergillus sp. IMPMS7 to break out crude oil-in-water emulsions (O/W. The fungal spores were isolated from marine sediments polluted with petroleum hydrocarbons. The spores exhibited the ability to destabilize different O/W emulsions prepared with medium, heavy or extra-heavy Mexican crude oils with specific gravities between 10.1 and 21.2°API. The isolated fungal spores showed a high hydrophobic power of 89.3 ± 1.9% and with 2 g of spores per liter of emulsion, the half-life for emulsion destabilization was roughly 3.5 and 0.7 h for extra-heavy and medium crude oil, respectively. Then, the kinetics of water separation and the breaking of the O/W emulsion prepared with heavy oil through a spectrofluorometric technique were studied. A decrease in the fluorescence ratio at 339 and 326 nm (I339/I326 was observed in emulsions treated with spores, which is similar to previously reported results using chemical demulsifiers.

Co-digestion of swine excreta associated with increasing levels of crude glycerin

Directory of Open Access Journals (Sweden)

Marco Antonio Previdelli Orrico Junior

2016-03-01

Full Text Available ABSTRACT The objective of this research was to evaluate the performance of anaerobic co-digestion of swine excreta associated with increasing doses of crude glycerin and different hydraulic retention times (HRT. A completely randomized design was adopted in a 3 × 4 factorial arrangement composed of three HRT (10, 17, and 24 days and four crude glycerin doses (0, 5, 10, and 15 g/100 g of total solids [TS], with four replications per treatment. The assessed parameters were: biogas production potential, reductions of volatile solids (VS, chemical oxygen demand (COD, and most probable number of total and thermotolerant coliforms. The biogas production per added VS presented quadratic effect at 17 and 24 days of HRT, with ideal doses of 5.5 and 5.9 g of crude glycerin/100 g TS, respectively. There was no difference among glycerin doses at 10-day HRT for VS reductions; however, at HRT of 17 and 24 days, there were differences, with greater reduction of 61.1% for 5 g of crude glycerin/100 g TS at 24-day HRT. The COD reduction values showed an effect among retention times, in which the 24-day HRT provided the best results. Reductions in coliforms were greater than 99%, with no difference among treatments. Addition of 5 to 6 g of crude glycerin/100 g TS with a 24-day HRT is more effective in biogas production and reduction of VS, COD, and coliforms from co-digestion of swine excreta.

Iron oxide functionalized graphene nano-composite for dispersive solid phase extraction of chemical warfare agents from aqueous samples.

Science.gov (United States)

Chinthakindi, Sridhar; Purohit, Ajay; Singh, Varoon; Tak, Vijay; Goud, D Raghavender; Dubey, D K; Pardasani, Deepak

2015-05-15

Present study deals with the preparation and evaluation of graphene based magnetic nano-composite for dispersive solid phase extraction of Chemical Weapons Convention (CWC) relevant chemicals from aqueous samples. Nano-composite, Fe3O4@SiO2-G was synthesized by covalently bonding silica coated Fe3O4 onto the graphene sheets. Nerve agents (NA), Sulfur mustard (SM) and their non-toxic environmental markers were the target analytes. Extraction parameters like amount of sorbent, extraction time and desorption conditions were optimized. Dispersion of 20 milligram of sorbent in 200mL of water sample for 20min. followed by methanol/chloroform extraction produced average to good recoveries (27-94%) of targeted analytes. Recoveries of real agents exhibited great dependency upon sample pH and ionic strength. Sarin produced maximum recovery under mild acidic conditions (56% at pH 5) while VX demanded alkaline media (83% at pH 9). Salts presence in the aqueous samples was found to be advantageous, raising the recoveries to as high as 94% for SM. Excellent limits of detection (LOD) for sulphur mustard and VX (0.11ngmL(-1) and 0.19ngmL(-1) respectively) proved the utility of the developed method for the off-site analysis of CWC relevant chemicals. Copyright © 2015 Elsevier B.V. All rights reserved.

Fat, meat quality and sensory attributes of Large White × Landrace barrows fed with crude glycerine

Directory of Open Access Journals (Sweden)

M. Belen Linares

2014-07-01

Full Text Available The use of alternative raw materials like crude glycerine in animal feed to reduce final costs could be of interest as the sector seeks to increase its competitiveness. The aims of the present work were to evaluate the effect of crude glycerine on back-fat thickness and the proximate composition of pork and to examine the effect on pork quality of using growing-finishing feeds with different percentages of crude glycerine added. For this purpose 60 crossbreed (Large White × Landrace barrows were subdivided into three groups according to the crude glycerine concentration administered in feed: C, control diet, no crude glycerine; and G2.5 and G5 with 2.5% and 5% added crude glycerine, respectively. This study evaluated proximate composition, pH, cooking losses, texture, colour coordinates, fatty acid profile, and sensorial analysis. No differences were found in any of the three groups studied (C, G2.5, G5 for measurements performed both before (with ultrasound equipment and after slaughter (millimetre ruler. The proximate composition and the physical-chemical parameters of longissimus dorsi were similar between groups. There were no differences detected (p>0.05 between the three groups as regards the CIELab coordinates, textural profile and sensory attributes. Therefore, 5% crude glycerine to replace corn could be used as an ingredient in pig feed without appreciably affecting the back-fat and meat quality characteristics.

Dispersed oil disrupts microbial pathways in pelagic food webs.

Science.gov (United States)

Ortmann, Alice C; Anders, Jennifer; Shelton, Naomi; Gong, Limin; Moss, Anthony G; Condon, Robert H

2012-01-01

Most of the studies of microbial processes in response to the Deepwater Horizon oil spill focused on the deep water plume, and not on the surface communities. The effects of the crude oil and the application of dispersants on the coastal microbial food web in the northern Gulf of Mexico have not been well characterized even though these regions support much of the fisheries production in the Gulf. A mesocosm experiment was carried out to determine how the microbial community off the coast of Alabama may have responded to the influx of surface oil and dispersants. While the addition of glucose or oil alone resulted in an increase in the biomass of ciliates, suggesting transfer of carbon to higher trophic levels was likely; a different effect was seen in the presence of dispersant. The addition of dispersant or dispersed oil resulted in an increase in the biomass of heterotrophic prokaryotes, but a significant inhibition of ciliates, suggesting a reduction in grazing and decrease in transfer of carbon to higher trophic levels. Similar patterns were observed in two separate experiments with different starting nutrient regimes and microbial communities suggesting that the addition of dispersant and dispersed oil to the northern Gulf of Mexico waters in 2010 may have reduced the flow of carbon to higher trophic levels, leading to a decrease in the production of zooplankton and fish on the Alabama shelf.

UV curable aqueous dispersions for wood coatings

International Nuclear Information System (INIS)

Peeters, S.; Bleus, J.P.; Wang, Z.J.; Arceneaux, J. A.; Hall, J.

1999-01-01

In this paper the characterisation of aqueous dispersions of UV curable resins is described. Two types of dispersions were used: dispersions that are tacky after water evaporation and tack - free before cure dispersions. The physical and rheological properties of these products have been determined and the performance of these dispersions in various formulations, especially for wood applications has been studied. With these dispersions, it is possible to produce coatings having a good cure speed, good surface hardness and good solvent -, chemical - and water resistance

Toxicity of crude oils and a dispersant to the stony coral Madracis mirabilis

Energy Technology Data Exchange (ETDEWEB)

Elgershuizen, J H.B.W.; De Kruijf, H A.M.

1976-02-01

Coral reefs play a crucial role in the ecology of coastal tropical waters. In many areas they are now exposed to pollution hazards which have sometimes caused severe damage. Increasingly they are exposed to oil and, where clean-up methods are used, to dispersants. The report shows that the clean-up may be more damaging than the oil. (auth)

Characterization of Chemical Exchange Using Relaxation Dispersion of Hyperpolarized Nuclear Spins.

Science.gov (United States)

Liu, Mengxiao; Kim, Yaewon; Hilty, Christian

2017-09-05

Chemical exchange phenomena are ubiquitous in macromolecules, which undergo conformational change or ligand complexation. NMR relaxation dispersion (RD) spectroscopy based on a Carr-Purcell-Meiboom-Gill pulse sequence is widely applied to identify the exchange and measure the lifetime of intermediate states on the millisecond time scale. Advances in hyperpolarization methods improve the applicability of NMR spectroscopy when rapid acquisitions or low concentrations are required, through an increase in signal strength by several orders of magnitude. Here, we demonstrate the measurement of chemical exchange from a single aliquot of a ligand hyperpolarized by dissolution dynamic nuclear polarization (D-DNP). Transverse relaxation rates are measured simultaneously at different pulsing delays by dual-channel 19 F NMR spectroscopy. This two-point measurement is shown to allow the determination of the exchange term in the relaxation rate expression. For the ligand 4-(trifluoromethyl)benzene-1-carboximidamide binding to the protein trypsin, the exchange term is found to be equal within error limits in neutral and acidic environments from D-DNP NMR spectroscopy, corresponding to a pre-equilibrium of trypsin deprotonation. This finding illustrates the capability for determination of binding mechanisms using D-DNP RD. Taking advantage of hyperpolarization, the ligand concentration in the exchange measurements can reach on the order of tens of μM and protein concentration can be below 1 μM, i.e., conditions typically accessible in drug discovery.

Evaporation of Arabian light crude oil spilled on sea and on beach sands : influence of solar radiation and wind velocity

International Nuclear Information System (INIS)

Bergueiro, J.R.; Marti, A.; Fuertes, A.; Moreno, S.; Guijarro, S.

1998-01-01

The evaporation of crude oil resulting from a spill on sea water was studied to develop a simulation model. Evaporation takes place within a complex process of mass and energy transfer. The effects of physical and chemical variables (such as wind velocity and direct and diffused solar radiation) and the environmental conditions of the spillage were also considered. Arabian crude oil was used in the simulation model for crude oil spillage on sea water. An equation for the evaporation process was used to correlate the evaporated fraction of oil as a function of time. The area of spreading was determined as a function of the dominant stage at each moment of spreading. The evaporation of spilled crude oil on beach sand consisting of three different particle sizes was also studied and used for a simulation model for crude oil spillage on a polluted beach. 7 refs., 6 tabs., 10 figs

Effect of crude oil contamination on the engineering behavior of clay soils

International Nuclear Information System (INIS)

Rehman, H.; Abdoljaowad, S.N.

2005-01-01

Humans are, unintentionally or intentionally contaminating soil from different sources. The contaminated soil are not only a challenge for the environmentalists but also for geotechnical engineers. When contaminated by crude oil, the soil is subjected to a change in its engineering properties. The soil, which is mostly affected by its environment, is clay, being active electro-chemically. So, a comprehensive laboratory-testing program was performed to compare the engineering properties of an uncontaminated and a contaminated clay. Laboratory tests included all basic and advanced geotechnical tests along with Scanning Electron Microscope (SEM). Crude oil was chosen as the contaminant. The clay was taken from the Al-Qatif area of the Eastern province of Saudi Arabia. The selected soil is considered to be highly expansive in nature. The comparison between uncontaminated and crude oil contaminated clay showed that there would be a significant change in the engineering behavior of the clay if it were contaminated by crude oil. The contaminated clay behaves more like sand, owing to the formation of agglomerates. The coarse-grained soil-like behavior was observed in the strength of the oil-contaminated clay. The contamination has affected the plasticity and the cation exchange capacity of the investigated clay. The swelling pressure of the contaminated clay is 1/3 of that of the uncontaminated clay while the swelling is almost the same. (author)

Crude oil growth impact on pipelines

International Nuclear Information System (INIS)

Devries, O.

2005-01-01

This paper provided an outline of crude oil production and supply in Canada. Details of oil sands projects in Athabasca, Cold Lake and Peace River were presented. A chart of oil sands growth by major project was provided. A list of new emerging oil sands crude types was also presented along with details of a synthetic bitumen blending synergy. Maps of Western Canadian crude oil markets were provided, along with details of refinery and market demand by crude type. Various pipeline alternatives to new markets were examined, with reference to Enbridge Pipeline's supply and capacity. Details of the Hardisty to U.S Gulf Coast Pipeline and the Edmonton to Prince Rupert Pipeline and its terminal and dock facilities were presented. It was concluded that pipeline capacity and seasonal factors will influence market demand, while linefill, crude types and the quality of the product will influence operational strategies. tabs., figs

Production of Flocculants, Adsorbents, and Dispersants from Lignin

Directory of Open Access Journals (Sweden)

Jiachuan Chen

2018-04-01

Full Text Available Currently, lignin is mainly produced in pulping processes, but it is considered as an under-utilized chemical since it is being mainly used as a fuel source. Lignin contains many hydroxyl groups that can participate in chemical reactions to produce value-added products. Flocculants, adsorbents, and dispersants have a wide range of applications in industry, but they are mainly oil-based chemicals and expensive. This paper reviews the pathways to produce water soluble lignin-based flocculants, adsorbents, and dispersants. It provides information on the recent progress in the possible use of these lignin-based flocculants, adsorbents, and dispersants. It also critically discusses the advantages and disadvantages of various approaches to produce such products. The challenges present in the production of lignin-based flocculants, adsorbents, and dispersants and possible scenarios to overcome these challenges for commercial use of these products in industry are discussed.

EVALUATING THE SHORT RUN EFFECTS OF U.S. CRUDE OIL INVENTORY LEVELS ON WTI CRUDE OIL PRICE FROM 1993 - 2013

Directory of Open Access Journals (Sweden)

Tobi Olasojiand

2016-07-01

Full Text Available The focus of this research was to investigate the short-term influence of U.S. crude oil inventories on WTI crude oil prices from 1993 to 2013. This study is important for policy makers who wish to reduce the persistent and growing price volatility of crude oil and its related products as well as businesses such as airline companies who wish to make annual budgetary sales decisions. Using OLS multiple regression, cointegration, VECM and Ex-post forecast techniques; we provide evidence of an inelastic relationship in which a 1% increase in U.S. crude oil inventories is associated with 0.46% decrease in WTI crude oil prices; however this was only valid for 22% of WTI crude oil price variation. We also find that past data on U.S. crude oil inventories could be used to predict future WTI crude oil prices movement. Contrary to literature, the results of the VECM analysis indicate there is no short-run relationship between both variables over the trajectory.

Gas chromatographic simulated distillation-mass spectrometry for the determination of the boiling point distributions of crude oils

Science.gov (United States)

Roussis; Fitzgerald

2000-04-01

The coupling of gas chromatographic simulated distillation with mass spectrometry for the determination of the distillation profiles of crude oils is reported. The method provides the boiling point distributions of both weight and volume percent amounts. The weight percent distribution is obtained from the measured total ion current signal. The total ion current signal is converted to weight percent amount by calibration with a reference crude oil of a known distillation profile. Knowledge of the chemical composition of the crude oil across the boiling range permits the determination of the volume percent distribution. The long-term repeatability is equivalent to or better than the short-term repeatability of the currently available American Society for Testing and Materials (ASTM) gas chromatographic method for simulated distillation. Results obtained by the mass spectrometric method are in very good agreement with results obtained by conventional methods of physical distillation. The compositional information supplied by the method can be used to extensively characterize crude oils.

Evaluation of behavioral parameters, hematological markers, liver and kidney functions in rodents exposed to Deepwater Horizon crude oil and Corexit.

Science.gov (United States)

Ramesh, Sindhu; Bhattacharya, Dwipayan; Majrashi, Mohammed; Morgan, Marlee; Prabhakar Clement, T; Dhanasekaran, Muralikrishnan

2018-04-15

The 2010 Deepwater Horizon (DWH) oil spill is the largest marine oil spill in US history. In the aftermath of the spill, the response efforts used a chemical dispersant, Corexit, to disperse the oil spill. The health impacts of crude oil and Corexit mixture to humans, mammals, fishes, and birds are mostly unknown. The purpose of this study is to investigate the in vivo effects of DWH oil, Corexit, and oil-Corexit mixture on the general behavior, hematological markers, and liver and kidney functions of rodents. C57 Bl6 mice were treated with DWH oil (80 mg/kg) and/or Corexit (95 mg/kg), and several hematological markers, lipid profile, liver and kidney functions were monitored. The results show that both DWH oil and Corexit altered the white blood cells and platelet counts. Moreover, they also impacted the lipid profile and induced toxic effects on the liver and kidney functions. The impacts were more pronounced when the mice were treated with a mixture of DWH-oil and Corexit. This study provides preliminary data to elucidate the potential toxicological effects of DWH oil, Corexit, and their mixtures on mammalian health. Residues from the DWH spill continue to remain trapped along various Gulf Coast beaches and therefore further studies are needed to fully understand their long-term impacts on coastal ecosystems. Copyright © 2018. Published by Elsevier Inc.

Dispersant affects the cellular influences of single-wall carbon nanotube: the role of CNT as carrier of dispersants.

Science.gov (United States)

Horie, Masanori; Stowe, Mayumi; Tabei, Miki; Kato, Haruhisa; Nakamura, Ayako; Endoh, Shigehisa; Morimoto, Yasuo; Fujita, Katsuhide

2013-06-01

The application of carbon nanotube (CNT) as a functional material to engineering and life sciences is advanced. In order to evaluate the cytotoxicity of CNT in vitro, some chemical and biological reagents are used for dispersants. In the present study, the cellular influences of six kinds of chemical or biological reagents used as dispersants were examined. Pluronic F-127, Pluronic F-68, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), pulmonary surfactant preparation Surfacten®, bovine serum albumin (BSA) and Tween 80 were used in the preparation of CNT-medium dispersants. The influences of each reagent on cell viability in human lung carcinoma A549 cells were small. However, Pluronic F-127, DPPC, Surfacten® and Tween 80 induced an increase of intracellular reactive oxygen species (ROS) level. Next, CNT-medium dispersions were prepared, using each reagent as a dispersant and applied to A549 cells. The cellular influences depended on the kind of dispersant. Cells exposed to CNT dispersion including Pluronic® F-127, Surfacten®, DPPC and Tween 80 showed LDH release to the culture supernatant. Induction of intracellular ROS level was observed in cells exposed to CNT dispersion including each reagent except BSA. These results suggest that the adsorbed dispersant reagents on the surface of the CNT affect its cellular influences, particularly the induction of oxidative stress.

7 CFR 30.20 - Crude.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Crude. 30.20 Section 30.20 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... unfinished as a result of extreme immaturity. Crude tobacco ordinarily has a characteristic green color. ...

Optimization of combined in-vessel composting process and chemical oxidation for remediation of bottom sludge of crude oil storage tanks.

Science.gov (United States)

Koolivand, Ali; Naddafi, Kazem; Nabizadeh, Ramin; Saeedi, Reza

2017-07-31

In this research, removal of petroleum hydrocarbons from oily sludge of crude oil storage tanks was investigated under the optimized conditions of in-vessel composting process and chemical oxidation with H 2 O 2 and Fenton. After determining the optimum conditions, the sludge was pre-treated with the optimum state of the oxidation process. Then, the determined optimum ratios of the sludge to immature compost were composted at a C:N:P ratio of 100:5:1 and moisture content of 55% for a period of 10 weeks. Finally, both pre-treated and composted mixtures were again oxidized with the optimum conditions of the oxidants. Results showed that total petroleum hydrocarbons (TPH) removal of the 1:8 and 1:10 composting reactors which were pre-treated with H 2 O 2 were 88.34% and 90.4%, respectively. In addition, reduction of TPH in 1:8 and 1:10 composting reactors which were pre-treated with Fenton were 83.90% and 84.40%, respectively. Without applying the pre-treatment step, the composting reactors had a removal rate of about 80%. Therefore, pre-treatment of the reactors increased the TPH removal. However, post-oxidation of both pre-treated and composted mixtures reduced only 13-16% of TPH. Based on the results, remarkable overall removal of TPH (about 99%) was achieved by using chemical oxidation and subsequent composting process. The study showed that chemical oxidation with H 2 O 2 followed by in-vessel composting is a viable choice for the remediation of the sludge.

Gas chromatography-mass spectrometry analysis of different organic crude extracts from the local medicinal plant of Thymus vulgaris L

Institute of Scientific and Technical Information of China (English)

Laila Salim Al Hashmi; Mohammad Amzad Hossain; Afaf Mohammed Weli; Qasim Al-Riyami; Jamal Nasser Al-Sabahi

2013-01-01

Objective: To isolate and analyze the chemical composition in different crude extracts of from the leaves of locally grown of Thymus vulgaris L (T. vulgaris) by gas chromatography-mass spectrometry (GC-MS). Methods: The shade dried leaves powder was extracted with methanol by using Soxhlet extractor. Methanol crude extracts of T. vulgaris and the derived fractions of hexane, chloroform, ethyl acetate and butanol were obtained. Results: Qualitative analyses of various organic crude extracts of T. vulgaris by using GC-MS showed that there were different types of high and low molecular weight compounds. Most of the isolated and identified compounds by GC-MS in the crude extracts are basically biologically important. Further, the T. vulgaris leaf possessed certain characteristics that can be ascribed to cultivation on a domestic plantation. The crude extracts were prepared from the powder leaves of T. vulgaris for respective compounds can be chosen on the basis of above GC-MS analysis. Conclusions: All the major compounds were identified and characterized by spectroscopic method in different organic crude extracts of T. vulgaris are biologically active molecules. Thus the identification of a good number of compounds in various crude extracts of T. vulgaris might have some ecological role.

Gas chromatography-mass spectrometry analysis of different organic crude extracts from the local medicinal plant of Thymus vulgaris L

Institute of Scientific and Technical Information of China (English)

Laila; Salim; Al; Hashmi; Mohammad; Amzad; Hossain; Afaf; Mohammed; Weli; Qasim; Al-Riyami; Jamal; Nasser; Al-Sabahi

2013-01-01

Objective:To isolate and analyze the chemical composition in different crude extracts of from the leaves of locally grown of Thymus vulgaris L(T.vulgaris)by gas chromatography-mass spectrometry(GC-MS).Methods:The shade dried leaves powder was extracted with methanol by using Soxhlet extractor.Methanol crude extracts of T.vulgaris and the derived fractions of hexane,chloroform,ethyl acetate and butanol were obtained.Results:Qualitative analyses of various organic crude extracts of T.vulgaris by using GC-MS showed that there were different types of high and low molecular weight compounds.Most of the isolated and identified compounds by GC-MS in the crude extracts are basically biologically important.Further,the T.vulgaris leaf possessed certain characteristics that can be ascribed to cultivation on a domestic plantation.The crude extracts were prepared from the powder leaves of T.vulgaris for respective compounds can be chosen on the basis of above GC-MS analysis.Conclusions:All the major compounds were identified and characterized by spectroscopic method in different organic crude extracts of T.vulgaris are biologically active molecules.Thus the identification of a good number of compounds in various crude extracts of T.vulgaris might have some ecological role.

Influence of dispersants on trophic transfer of petroleum hydrocarbons in a marine food chain

International Nuclear Information System (INIS)

Wolfe, M. F.; Schwartz, G. J. B.; Singaram, S.; Tjeerdema, R. S.

1997-01-01

Experiments were conducted to determine the impact of dispersing agents on petroleum hydrocarbons (PH) bioavailability and trophic transfer in primary levels of a marine food chain. Uptake, bioaccumulation and metabolic transformation of a model PH, ( 1 4C)naphthalene, were measured and compared with Prudhoe Bay Crude Oil (PBCO) dispersed with Corexit 9527, and undispersed preparations of PBCO. The model food chain consisted of a primary algae producer and a primary rotifer consumer. Results showed that uptake of naphthalene increased significantly in the presence of a dispersant in algae. A significant increase in uptake was also recorded in rotifers via trophic transfer. Trophic transfer played a significant, sometimes even dominant, role in uptake and bioaccumulation. 27 refs., 6 figs

7 CFR 29.1010 - Crude.

Science.gov (United States)

2010-01-01

... of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 92) § 29.1010 Crude. A subdegree of maturity. Crude leaves are usually hard and slick as a result of extreme immaturity. A similar condition may result from fire-kill, sunburn, or sunscald. Any leaf...

7 CFR 29.3512 - Crude.

Science.gov (United States)

2010-01-01

... of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Type 95) § 29.3512 Crude. A subdegree of maturity. Crude leaves are usually hard and slick as a result of extreme immaturity. A similar condition may result from firekill, sunburn, or sunscald. Any leaf...

7 CFR 29.2261 - Crude.

Science.gov (United States)

2010-01-01

... of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing.... A subdegree of maturity. Crude leaves are usually hard and slick as a result of extreme immaturity. A similar condition may result from fire-kill, sunburn, or sunscald. Any leaf which is crude to the...

Radiation-induced desulfurization of Arabian crude oil and straight-run diesel

Science.gov (United States)

Basfar, A. A.; Mohamed, K. A.

2011-11-01

Radiation-induced desulfurization of four types of Arabian crude oils (heavy, medium, light and extra light) and straight-run diesel (SRD) was investigated over the range of 10-200 kGy. Results show that gamma radiation processing at absorbed doses up to 200 kGy without further treatment is not sufficient for desulfurization. However, the combination of gamma-irradiation with other physical/chemical processes (i.e. L/L extraction, adsorption and oxidation) may be capable of removing considerable levels of sulfur compounds in the investigated products. Currently, this approach of combined radiation/physical/chemical processes is under investigation. The findings of these attempts will be reported in the future.

Efficient way of importing crude oil from oil producing countries - A review on diversification policy of crude oil import

Energy Technology Data Exchange (ETDEWEB)

Lee, Dal Sok [Korea Energy Economics Institute, Euiwang (Korea)

1999-03-01

Since the second oil crisis, the government has operated the import diversification support program to reduce the risk of crude oil import from Middle-East region and to raise the ability of dealing with the risk. This study tried to seek policy trends in future through reviewing the market environment related to the crude oil import diversification policy and the goal, instrument and effect of the policy. The supply and demand of crude oil and the price are influenced by market system in the world oil market and there are various types of crude oil trading available to both sellers and buyers. There is a probability that the suspension of supply in a certain area could be led to the price issue rather than the physical use of crude oil. In addition, the advantage of price with long-term contract of crude oil was abolished since the price of crude oil imported by term contract has been linked to spot prices. As a result, it is shown that the potential benefit from crude oil import diversification policy is reduced although political and social insecurity still exists in Middle-East region. Therefore, it is desirable to maintain the existing support program until the amount of stored oil reaches the optimum level and to help private enterprises determine the import considering economical efficiency and risk. (author). 36 refs., 5 figs., 23 tabs.

Systemic toxicity of dermally applied crude oils in rats

Energy Technology Data Exchange (ETDEWEB)

Feuston, M.H.; Mackerer, C.R.; Schreiner, C.A.; Hamilton, C.E. [Stonybrook Labs., Inc., Princeton, NJ (United States)

1997-12-31

Two crude oils, differing in viscosity (V) and nitrogen (N) and sulfur (S) content, were evaluated for systemic toxicity, In the Crude I (low V, low N, low S) study, the material was applied to the clipped backs of rats at dose levels of 0, 30, 125, and 500 mg/kg. In the Crude II (high V, high N, moderate S) study, the oil was applied similarly at the same dose levels. The crude oils were applied for 13 wk, 5 d/wk. Exposure sites were not occluded. Mean body weight gain (wk 1-14) was significantly reduced in male rats exposed to Crude II; body weight gain of all other animals was not adversely affected by treatment. An increase in absolute (A) and relative (R) liver weights and a decrease in A and R thymus weights were observed in male and female rats exposed to Crude II at 500 mg/kg; only liver weights (A and R) were adversely affected in male and female rats exposed to Crude I. In general, there was no consistent pattern of toxicity for serum chemistry endpoints; however, more parameters were adversely affected in Crude II-exposed female rats than in the other exposed groups. A consistent pattern of toxicity for hematology endpoints was observed among male rats exposed to Crude I and male and female rats exposed to Crude II. Parameters affected included: Crudes I and II, red blood cell count, hemoglobin, and hematocrit, Crude II, platelet count. Microscopic evaluation of tissues revealed the following treatment-related findings: Crude I, treated skin, thymus, and thyroid; Crude II, bone marrow, treated skin, thymus, and thyroid. The LOEL (lowest observable effect level) for skin irritation and systemic toxicity (based on marginal effects on the thyroid) for both crude oils was 30 mg/kg; effects were more numerous and more pronounced in animals exposed to Crude II. Systemic effects are probably related to concentrations of polycyclic aromatic compounds (PAC) found in crude oil.

Qualitative characteristics of meat from young bulls fed different levels of crude glycerin.

Science.gov (United States)

Carvalho, J R R; Chizzotti, M L; Ramos, E M; Machado Neto, O R; Lanna, D P D; Lopes, L S; Teixeira, P D; Ladeira, M M

2014-02-01

The objective was to evaluate the fatty acid profile and qualitative characteristics of meat from young bulls fed crude glycerin. Forty-four animals with an initial live weight of 368 ± 4 kg were used in a completely randomized design, with four treatments: no glycerin or addition of 6, 12 or 18% glycerin. The animals were slaughtered with 519.5 ± 14.9 kg of live weight. The meat characteristics assessed were chemical composition, shear force, fatty acid concentration, color and lipid oxidation. The addition of glycerin increased the content of ether extract (P<0.05) in the muscle. A linear increase was observed (P<0.05) in the oleic acid contents (C18:1 cis 9). The saturated fatty acid (SFA) contents linearly decreased in the muscle as a function of glycerin addition. The lightness (L*) and yellowness (b*) indices increased with the use of crude glycerin (P<0.05). The crude glycerin increased the intramuscular fat and oleic acid content in the longissimus dorsi muscle. © 2013.

Alkyl PAH in crude oil cause chronic toxicity to early life stages of fish

Energy Technology Data Exchange (ETDEWEB)

Hodson, P.V.; Khan, C.W.; Saravanabhavan, G.; Clarke, L.; Brown, R.S. [Queen' s Univ., Kingston, ON (Canada). School of Environmental Studies; Hollebone, B.; Wang, Z. [Environment Canada, Ottawa, ON (Canada). ; Short, J. [National Oceanic and Atmospheric Administration, Juneau, AK (United States). Auke Bay Lab; Lee, K.; King, T. [Fisheries and Oceans Canada, Dartmouth, NS (Canada). Centre for Offshore Oil and Gas Environmental Research

2007-07-01

In order to mitigate the risk to fisheries following an offshore oil spill, it is necessary to know the components of crude oil that are toxic. Chronic exposure of early life stages of fish to crude oil causes Blue Sac Disease, a syndrome characterized by induction of the cytochrome P450 (CYP1A) enzyme. In this study, effects-driven fractionation of Alaska North Slope Crude was used to identify the classes of compounds that cause CYP1A induction in juvenile rainbow trout and chronic toxicity to developing stages of Japanese medaka. Four fractions of compounds were created by low temperature vacuum distillation. This separated the constituents of oil according to their volatility within defined temperature ranges. The fractions were separated according to their boiling points. With a temperature range of 287-481 degrees C, fraction F3 was the only fraction as toxic as whole oil and induced CYPP1A enzymes of fish. Fractions containing specific classes of alkyl PAH were also collected. For all separations, the performance of the method was evaluated by the extent to which PAH were separated from aliphatics, resins and waxes, as well as by the quantitative recovery of mass in fractions and subfractions. The induction of CYP1A enzymes showed that PAH was present in all fractions that were highly toxic, but the toxicity tests indicated that not all fractions containing PAH were toxic. This research provided a scientific basis for comparing the risks of different crude oils based on chemical analyses that show the different proportions or amounts of PAH present. The results indicate which compounds of concern should be used to determine the extent and success of oil spill remediation, and provide a biological interpretation of chemical fingerprinting used to discriminate the sources of oil pollution. 15 refs., 1 tab.

Designing and testing a chemical demulsifier dosage controller in a crude oil desalting plant: an artificial Intelligence-Based network approach

Energy Technology Data Exchange (ETDEWEB)

Alshehri, A.K.; Ricardez-Sandoval, L.A.; Elkamel, A. [Department of Chemical Engineering, University of Waterloo, Waterloo (Canada)

2010-06-15

The aim of this paper is to present an artificial neural network (ANN) controller trained on a historical data set that covers a wide operating range of the fundamental parameters that affect the demulsifier dosage in a crude oil desalting process. The designed controller was tested and implemented on-line in a gas-oil separation plant. The results indicate that the current control strategy overinjects chemical demulsifier into the desalting process whereas the proposed ANN controller predicts a lower demulsifier dosage while keeping the salt content within its specification targets. Since an on-line salt analyzer is not available in the desalting plant, an ANN based on historical measurements of the salt content in the desalting process was also developed. The results show that the predictions made by this ANN controller can be used as an on-line strategy to predict and control the salt concentration in the treated oil. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

Effects of Different Pretreatments to Fresh Fruit on Chemical and Thermal Characteristics of Crude Palm Oil.

Science.gov (United States)

Tang, Minmin; Xia, Qiuyu; Holland, Brendan J; Wang, Hui; Zhang, Yufeng; Li, Rui; Cao, Hongxing

2017-12-01

This study selected 5 methods, including boiling, hot air drying, high-pressurized steam, freezing, and microwave radiation to pretreat fresh oil palm fruit before solvent extraction of the oil. Using fresh fruit as a control, the pretreatment methods were compared for the effects on the activity of the 2 main enzymes in the fruit and some physicochemical properties of the crude palm oil. The results indicated, although all the 5 pretreatments could inactivate lipase and peroxidase in the treated flesh significantly (P oils. The crude oil from frozen fruit contained significantly more vitamin E (37829.33 ppm) than previously reported. Microwave radiation was shown to significantly decrease the free fatty acid content and the peroxide value, while increasing the oxidative stability index. Thermal behaviors of the oils were significantly different to each other with the exception a few parameters (P < 0.05). © 2017 Institute of Food Technologists®.

Operational problems related to the preparation of the seawater soluble fraction of crude oil.

Science.gov (United States)

Ziolli, Roberta L; Jardim, Wilson F

2002-02-01

Owing to the importance of dissolution and weathering processes following oil spills, this work focused on the operational (quantitative) aspects related to the dissolution of petroleum-derived products, as well as the influence of solar light on both dissolution and the photoproduction of hydrogen peroxide. Four Brazilian crude oil samples were used to study the transfer process of organic compounds from the crude oil film to the aqueous phase (natural seawater) over a period of up to 45 days. Dissolved organic carbon (DOC), measured by non-dispersive infrared spectroscopy followed by high temperature catalytic combustion, was used to follow the partitioning between the two phases. Aqueous DOC values increased as a function of time (up to 15 days) until equilibrium was reached at concentrations ranging from 5 to 45 mg C L(-1). The final DOC concentration as well as the rate of dissolution depends on the nature of the crude oil. When exposed to sunlight, the dissolution was enhanced by up to 67.3%, and inorganic peroxides were generated in the concentration range from 4.5 up to 8.0 micromol L(-1) after 7.3 h irradiation. These results indicate that there is a need for a standard procedure for the production of the WSF in order to generate a more reliable tool to assess the impact of oil spills on the marine environment.

Dispersant testing : a study on analytical test procedures

International Nuclear Information System (INIS)

Fingas, M.F.; Fieldhouse, B.; Wang, Z.; Environment Canada, Ottawa, ON

2004-01-01

Crude oil is a complex mixture of hydrocarbons, ranging from small, volatile compounds to very large, non-volatile compounds. Analysis of the dispersed oil is crucial. This paper described Environment Canada's ongoing studies on various traits of dispersants. In particular, it describes small studies related to dispersant effectiveness and methods to improve analytical procedures. The study also re-evaluated the analytical procedure for the Swirling Flask Test, which is now part of the ASTM standard procedure. There are new and improved methods for analyzing oil-in-water using gas chromatography (GC). The methods could be further enhanced by integrating the entire chromatogram rather than just peaks. This would result in a decrease in maximum variation from 5 per cent to about 2 per cent. For oil-dispersant studies, the surfactant-dispersed oil hydrocarbons consist of two parts: GC-resolved hydrocarbons and GC-unresolved hydrocarbons. This study also tested a second feature of the Swirling Flask Test in which the side spout was tested and compared with a new vessel with a septum port instead of a side spout. This decreased the variability as well as the energy and mixing in the vessel. Rather than being a variation of the Swirling Flask Test, it was suggested that a spoutless vessel might be considered as a completely separate test. 7 refs., 2 tabs., 4 figs

Dispersed oil disrupts microbial pathways in pelagic food webs.

Directory of Open Access Journals (Sweden)

Alice C Ortmann

Full Text Available Most of the studies of microbial processes in response to the Deepwater Horizon oil spill focused on the deep water plume, and not on the surface communities. The effects of the crude oil and the application of dispersants on the coastal microbial food web in the northern Gulf of Mexico have not been well characterized even though these regions support much of the fisheries production in the Gulf. A mesocosm experiment was carried out to determine how the microbial community off the coast of Alabama may have responded to the influx of surface oil and dispersants. While the addition of glucose or oil alone resulted in an increase in the biomass of ciliates, suggesting transfer of carbon to higher trophic levels was likely; a different effect was seen in the presence of dispersant. The addition of dispersant or dispersed oil resulted in an increase in the biomass of heterotrophic prokaryotes, but a significant inhibition of ciliates, suggesting a reduction in grazing and decrease in transfer of carbon to higher trophic levels. Similar patterns were observed in two separate experiments with different starting nutrient regimes and microbial communities suggesting that the addition of dispersant and dispersed oil to the northern Gulf of Mexico waters in 2010 may have reduced the flow of carbon to higher trophic levels, leading to a decrease in the production of zooplankton and fish on the Alabama shelf.

Quality in the chemical analysis of biological matrices by fluorescence X-ray by energy dispersive

International Nuclear Information System (INIS)

Sousa, Evely E. de; Paiva, Jose Daniel S. de; Franca, Elvis J. de; Almeida, Macio E.S.; Cantinha, Rebeca S.; Hazin, Clovis A.

2013-01-01

The aim of this study was to obtain multielement analytical curves of high analytical rigor to the analysis of biological matrices by the technique of fluorescence x-ray energy dispersive - EDXRF. Calibration curves were constructed from the reference materials IAEA 140, IAEA 155, IAEA V8, V10 to the International Atomic Energy Agency - IAEA, and SRM1515, SRM 1547, SRM 1570a, SRM 1573a, SEM 1567a, to the National Institute of Standards and Technology - NIST. After energy calibration, all samples were subjected to vacuum to the analyzes by 100 seconds for each group of chemical elements. The voltages used were respectively 15 keV for chemical elements with less than atomic number 22 and 50 keV for the others. After the construction of the curves, the analytical quality was assessed by the analysis of a portion-test of the reference material SRM 2976, also produced by NIST. Based on the number of certified reference materials used for construction of calibration curves in this work, quality analytical protocol was originated with considerable reliability for quantification of chemical elements in biological samples by EDXR

Crude oil pipeline expansion summary

International Nuclear Information System (INIS)

2005-02-01

The Canadian Association of Petroleum Producers has been working with producers to address issues associated with the development of new pipeline capacity from western Canada. This document presents an assessment of the need for additional oil pipeline capacity given the changing mix of crude oil types and forecasted supply growth. It is of particular interest to crude oil producers and contributes to current available information for market participants. While detailed, the underlying analysis does not account for all the factors that may come into play when individual market participants make choices about which expansions they may support. The key focus is on the importance of timely expansion. It was emphasized that if pipeline expansions lags the crude supply growth, then the consequences would be both significant and unacceptable. Obstacles to timely expansion are also discussed. The report reviews the production and supply forecasts, the existing crude oil pipeline infrastructure, opportunities for new market development, requirements for new pipeline capacity and tolling options for pipeline development. tabs., figs., 1 appendix

In-situ production of biosurfactants: An alternative method for dispersing and bioremediating marine oil spills

International Nuclear Information System (INIS)

Josefsen, K.; Sveum, P.; Ramstad, S.; Markussen, S.; Folkvord, K.; Krigsvoll, S.; Aune, R.; Storroe, I.

1995-01-01

A study of surfactant producing bacteria for the dispersion of oil spills was conducted. Isolation procedures, shoreline experiments, flume basin experiments, and simulated open sea meso-scale experiments and results were described. Bacteria strains were obtained from several locations world-wide, though more success was experienced with strains from colder regions. Two strains were used in the meso-scale experiment. A rapid reduction in the aliphatic fraction of the dispersed oil was observed. Most strains were found to be capable of dispersing crude oils with differing compositions. Efforts to emulsify oil-in-water on an artificial shoreline with biosurfactants producing bacteria showed only limited success in mobilizing the oil. 8 figs., 2 tabs., 14 refs

Sensitivity of the deep-sea amphipod Eurythenes gryllus to chemically dispersed oil.

Science.gov (United States)

Olsen, Gro Harlaug; Coquillé, Nathalie; Le Floch, Stephane; Geraudie, Perrine; Dussauze, Matthieu; Lemaire, Philippe; Camus, Lionel

2016-04-01

In the context of an oil spill accident and the following oil spill response, much attention is given to the use of dispersants. Dispersants are used to disperse an oil slick from the sea surface into the water column generating a cloud of dispersed oil droplets. The main consequence is an increasing of the sea water-oil interface which induces an increase of the oil biodegradation. Hence, the use of dispersants can be effective in preventing oiling of sensitive coastal environments. Also, in case of an oil blowout from the seabed, subsea injection of dispersants may offer some benefits compared to containment and recovery of the oil or in situ burning operation at the sea surface. However, biological effects of dispersed oil are poorly understood for deep-sea species. Most effects studies on dispersed oil and also other oil-related compounds have been focusing on more shallow water species. This is the first approach to assess the sensitivity of a macro-benthic deep-sea organism to dispersed oil. This paper describes a toxicity test which was performed on the macro-benthic deep-sea amphipod (Eurythenes gryllus) to determine the concentration causing lethality to 50% of test individuals (LC50) after an exposure to dispersed Brut Arabian Light (BAL) oil. The LC50 (24 h) was 101 and 24 mg L(-1) after 72 h and 12 mg L(-1) at 96 h. Based on EPA scale of toxicity categories to aquatic organisms, an LC50 (96 h) of 12 mg L(-1) indicates that the dispersed oil was slightly to moderately toxic to E. gryllus. As an attempt to compare our results to others, a literature study was performed. Due to limited amount of data available for dispersed oil and amphipods, information on other crustacean species and other oil-related compounds was also collected. Only one study on dispersed oil and amphipods was found, the LC50 value in this study was similar to the LC50 value of E. gryllus in our study. Since toxicity data are important input to risk assessment and net environmental

Morphological classification of coke formed from the Castilla and Jazmin crude oils

International Nuclear Information System (INIS)

Picon Hernandez, Hector Julio; Centeno Hurtado, Aristobulo; Pantoja Agreda, Edgar Francisco

2008-01-01

A morphological classification of cokes from the Castilla and Jazmin Colombian crude oils was completed. These heavy-nature crude oils, after being fractioned during the refining stages, were physicochemical characterized and submitted to the coking process. The conclusions of this work are based on the characterization of the feedstock chemical composition according to the type of aromatic carbon. UV visible spectrophotometry and the corresponding micrographs obtained by a Scan Electron Microscope (SEM), in amplification intervals from 100X to 5000X for the samples of formed cokes, were analyzed. Results of this work allowed the determination of the morphological classification intervals in function of the polyaromatic compound concentration ratio (tetraromatic/triaromatic, and diaromatic/triaromatic) of the different coked feedstock. Furthermore, high content of calcium and sulfur in the feedstock promotes morphologies of the associated - shot type

Application of Markov Model in Crude Oil Price Forecasting

Directory of Open Access Journals (Sweden)

Nuhu Isah

2017-08-01

Full Text Available Crude oil is an important energy commodity to mankind. Several causes have made crude oil prices to be volatile. The fluctuation of crude oil prices has affected many related sectors and stock market indices. Hence, forecasting the crude oil prices is essential to avoid the future prices of the non-renewable natural resources to rise. In this study, daily crude oil prices data was obtained from WTI dated 2 January to 29 May 2015. We used Markov Model (MM approach in forecasting the crude oil prices. In this study, the analyses were done using EViews and Maple software where the potential of this software in forecasting daily crude oil prices time series data was explored. Based on the study, we concluded that MM model is able to produce accurate forecast based on a description of history patterns in crude oil prices.

Spectral signatures of fluorescence and light absorption to identify crude oils found in the marine environment

Science.gov (United States)

Baszanowska, E.; Otremba, Z.

2014-08-01

To protect the natural marine ecosystem, it is necessary to continuously enhance knowledge of environmental contamination, including oil pollution. Therefore, to properly track the qualitative and quantitative changes in the natural components of seawater, a description of the essential spectral features describing petroleum products is necessary. This study characterises two optically-different types of crude oils (Petrobaltic and Romashkino) - substances belonging to multi-fluorophoric systems. To obtain the spectral features of crude oils, the excitation-emission spectroscopy technique was applied. The fluorescence and light absorption properties for various concentrations of oils at a stabilised temperature are described. Both excitation-emission spectra (EEMs) and absorption spectra of crude oils are discussed. Based on the EEM spectra, both excitation end emission peaks for the wavelengthindependent fluorescence maximum (Exmax/ Emmax) - characteristic points for each type of oil - were identified and compared with the literature data concerning typical marine chemical structures.

Expanding U.S. markets for Canadian crude oil

International Nuclear Information System (INIS)

Heath, M.; Angevine, G.; Chan, K.; Renne, G.; Stariha, J.; MacKay, E.

1993-01-01

The quantities and types of Canadian, U.S. and competing foreign crudes flowing into U.S. market regions and the potential to retain and/or expand Canadian crude oil sales in each of those markets, was studied. The various pipeline system expansion/construction proposals were reviewed. Findings of the study with respect to prospects for crude oil sales into each of the U.S. market regions were presented. Opportunities and constraints with regard to the potential for incremental crude oil sales into each of the U.S. market regions were detailed. The study concluded that there was a substantial market in the U.S. for incremental sales of Canadian crudes. Most of the refineries in the U.S. market regions were more flexible in terms of their crude diet than they were before the rationalization and restructuring of the industry began. The market for crude oil in the U.S. was shown to be one of the most competitive in the world and the most volatile. The study also revealed that there were risks associated with large additions to the capacity to ship crude oil by pipeline from Western Canada, given the uncertainties surrounding future supply. 4 refs., figs., tabs

Weathering of hydrocarbons in mangrove sediments: testing the effects of using dispersants to treat oil spills

International Nuclear Information System (INIS)

Burns, K.A.; Codi, S.; Pratt, C.; Duke, N.C.

1999-01-01

This field study was a combined chemical and biological investigation of the relative effects of using dispersants to treat oil spills impacting mangrove habitats. The aim of the chemistry was to determine whether dispersant affected the short- or long-term composition of a medium range crude oil (Gippsland) stranded in a tropical mangrove environment in Queensland, Australia. Sediment cores from three replicate plots of each treatment (oil only and oil plus dispersant) were analyzed for total hydrocarbons and for individual molecular markers (alkanes, aromatics, triterpanes, and steranes). Sediments were collected at 2 days, then 1, 7, 13 and 22 months post-spill. Over this time, oil in the six treated plots decreased exponentially from 36.6 ± 16.5 to 1.2 ± 0.8 mg/g dry wt. There was no statistical difference in initial oil concentrations, penetration of oil to depth, or in the rates of oil dissipation between oiled or dispersed oil plots. At 13 months, alkanes were > 50% degraded, aromatics were ∼30% degraded based upon ratios of labile to resistant markers. However, there was no change in the triterpane or sterane biomarker signatures of the retained oil. This is of general forensic interest for pollution events. The predominant removal processes were evaporation (≤27%) and dissolution (≥56%), with a lag-phase of 1 month before the start of significant microbial degradation (≤17%). The most resistant fraction of the oil that remained after 7 months (the higher molecular weight hydrocarbons) correlated with the initial total organic carbon content of the soil. Removal rate in the Queensland mangroves was significantly faster than that observed in the Caribbean and was related to tidal flushing. (author)

Chemical and nutritional content of Opuntia ficus-indica (L ...

African Journals Online (AJOL)

Opuntia ficus-indica (L.) fruit pulp was analyzed for its chemical and nutritional content and the results compared with those of the same species from other parts of the world. The analysis included those for: Moisture and ash contents, crude fibre, energy values, non-reducing sugars, crude protein and vitamin C. Total ...

Toxicity of dispersant application: Biomarkers responses in gills of juvenile golden grey mullet (Liza aurata)

International Nuclear Information System (INIS)

Milinkovitch, Thomas; Godefroy, Joachim; Theron, Michael; Thomas-Guyon, Helene

2011-01-01

Dispersant use in nearshore areas is likely to increase the exposure of aquatic organisms to petroleum. To measure the toxicity of this controversial response technique, golden grey mullets (Liza aurata) were exposed to mechanically dispersed oil, chemically dispersed oil, dispersant alone in seawater, water-soluble fraction of oil and to seawater as a control treatment. Several biomarkers were assessed in the gills (enzymatic antioxidant activities, glutathione content, lipid peroxidation) and in the gallbladder (polycylic aromatic hydrocarbons metabolites). The significant differences between chemically dispersed oil and water soluble fraction of oil highlight the environmental risk to disperse an oil slick when containment and recovery can be conducted. The lack of significance between chemically and mechanically dispersed oil suggests that dispersant application is no more toxic than the natural dispersion of the oil slick. The results of this study are of interest in order to establish dispersant use policies in nearshore areas. - Highlights: → This study simulates and evaluates the toxicity of dispersant use in nearshore area. → Dispersant use toxicity is assessed through biomarkers measurement in a fish species. → Chemical dispersion of an oil slick increases the petroleum toxicity. → Dispersant use does not enhance the toxicity of a mechanically dispersed oil slick. → This work leads to conclusions concerning dispersant use policies in nearshore area. - When the meteorological conditions induce the dispersion of the oil slick (e.g. wave), the application of dispersant does not increase the toxicity of petroleum.

Field-scale variation in colloid dispersibility and transport

DEFF Research Database (Denmark)

Nørgaard, Trine; Møldrup, Per; Ferré, T. P. A.

2014-01-01

comparison parameters including textural, chemical, and structural (e.g. air permeability) 8 soil properties. The soil dispersibility was determined (i) using a laser diffraction method on 1-2 mm aggregates equilibrated to an initial matric potential of -100 cm H2O, (ii) using an end-over-end shaking on 6......Colloids are potential carriers for strongly sorbing chemicals in macroporous soils, but predicting the amount of colloids readily available for facilitated chemical transport is an unsolved challenge. This study addresses potential key parameters and predictive indicators when assessing colloid....... Predictions of soil dispersibility and the risk of colloid-facilitated chemical transport will therefore need to be highly scale- and area-specific....

Distillation fraction-specific ecotoxicological evaluation of a paraffin-rich crude oil.

Science.gov (United States)

Erlacher, Elisabeth; Loibner, Andreas P; Kendler, Romana; Scherr, Kerstin E

2013-03-01

Crude oil is a complex mixture of petroleum hydrocarbons (PHC) with distinct chemical, physical and toxicological properties relevant for contaminated site risk assessment. Ecotoxicological effects of crude oil distillation fractions on luminescent bacteria (Vibrio fischeri), earthworms (Dendrobaena hortensis) and invertebrates (Heterocypris incongruens) were tested using two spiked soils and their elutriates. Fraction 2 (F2) had an equivalent carbon number (ECN) range of >10 to 16, and F3 from >16 to 39. F2 showed a substantially higher ecotoxicological effect than F3 for Vibrio and Dendrobaena. In contrast, severe inhibition of Heterocypris by the poorly soluble F3 is attributed to mechanical organ blockage. Immediate sequestration of PHC to the organic matter-rich soil effected reduced toxicity for all organisms. This study indicates that a more differentiated consideration (i) of PHC mixtures based on ECN range and (ii) of model soil properties employed for ecotoxicity testing should be included into PHC-contaminated site risk assessment. Copyright © 2012 Elsevier Ltd. All rights reserved.

Antiviral Activity of Crude Hydroethanolic Extract from Schinus terebinthifolia against Herpes simplex Virus Type 1.

Science.gov (United States)

Nocchi, Samara Requena; Companhoni, Mychelle Vianna Pereira; de Mello, João Carlos Palazzo; Dias Filho, Benedito Prado; Nakamura, Celso Vataru; Carollo, Carlos Alexandre; Silva, Denise Brentan; Ueda-Nakamura, Tânia

2017-04-01

Herpes simplex virus infections persist throughout the lifetime of the host and affect more than 80 % of the humans worldwide. The intensive use of available therapeutic drugs has led to undesirable effects, such as drug-resistant strains, prompting the search for new antiherpetic agents. Although diverse bioactivities have been identified in Schinus terebinthifolia , its antiviral activity has not attracted much attention. The present study evaluated the antiherpetic effects of a crude hydroethanolic extract from the stem bark of S. terebinthifolia against Herpes simplex virus type 1 in vitro and in vivo as well as its genotoxicity in bone marrow in mammals and established the chemical composition of the crude hydroethanolic extract based on liquid chromatography-diode array detector-mass spectrometry and MS/MS. The crude hydroethanolic extract inhibited all of the tested Herpes simplex virus type 1 strains in vitro and was effective in the attachment and penetration stages, and showed virucidal activity, which was confirmed by transmission electron microscopy. The micronucleus test showed that the crude hydroethanolic extract had no genotoxic effect at the concentrations tested. The crude hydroethanolic extract afforded protection against lesions that were caused by Herpes simplex virus type 1 in vivo . Liquid chromatography-diode array detector-mass spectrometry and MS/MS identified 25 substances, which are condensed tannins mainly produced by a B-type linkage and prodelphinidin and procyanidin units. Georg Thieme Verlag KG Stuttgart · New York.

Biodegradability of northern crude oil

Energy Technology Data Exchange (ETDEWEB)

Cook, F D; Westlake, D W.S.

1976-01-01

Field studies on the microbiological degradation of crude oils encompassed the placing of oil-soaked plots in two areas in the Northwest Territories and Alberta. Replicate plots received amendments of fertilizer, oil-utilizing bacteria, fertilizer plus bacteria or were untreated except for the oil. Changes in microbial numbers and chemical composition of recovered oil were determined periodically. The initial stimulatory effect on bacterial numbers brought about by the addition of fertilizers to oil-soaked plots diminished two years after the application to a point where the differences were no longer significant. Experiments carried out in the Norman Wells area to determine the effect of the amount of fertilizer applied on oil degradation have yielded inconclusive results. The data suggest that at least 2.7 kg of urea-phosphate fertilizer per kl of oil is required to maintain a reasonable oil degradation rate. Preliminary studies on the use of fertilizer coated with chemicals to increase its hydrophobic character indicate that they could be useful in treating wet-land oil spills. Soils from the McKenzie River drainage basin indicate that bacteria are present which can use oil under mesophilic conditions. However, the ability to use the same oil under psychrophilic conditions is more restricted. At least one bacterial species from each mixed population studied was capable of bringing about chemical changes in oil similar to those observed for the original mixed culture. The potential hazards and uses of the seeding of oil spills is discussed relative to the environmental conditions found in the northern part of Canada. 35 refs., 2 figs., 15 tabs.

A dispersion model of transport media in radiotracer investigations on selected chemical installations

International Nuclear Information System (INIS)

Iller, E.

1999-01-01

Tracer investigations of media transport through chemical reactors play a significant role in the chemical technology. They provide the basis for the determination of some important process parameters, such as flow character of the transported medium, degree of utilisation of the reactor volume during chemical transitions of substrates or even indicate possible mechanisms of chemical reactions. Determination of the medium flow characteristics is closely connected with the mathematical description of the process - a mathematical model of transport. The method of assessment of radiotracers suitability for the investigation of distillation processes presented in this paper allows to determine, in a simple manner, the parameters of distillation characteristics of the radionuclides, the average distillation temperature, the range of distillation temperatures, a suitable radiochemical purity. These parameters precisely determine the behavior of tracers to be expected in a wide range of variable conditions of the distillation process. Applications of tracer tested in such a manner to the investigations of dynamics of media in the industrial rectification columns has resulted in obtaining a dependable evaluation of the performance of these columns in a wide range of changes of their operational parameters. Particular attention has been paid to dynamics of the liquid [phase on the column plate. A dispersion model of liquid flow with hold-up zones has been proposed for the description of the liquid phase transport in the plate - overall assembly.The model consists of a number of flow and stagnant zones, with mass transfer between them. Another example of practical application of results from radiotracer investigation is an analysis of of phase dynamics in the installations designed for the process of liquefaction of Polish coals by means of their catalytic hydrogenation. For the analysis of phase transport in a reaction vessel various mathematical models were applied with

Enbridge system : crude types, transportation and handling systems

Energy Technology Data Exchange (ETDEWEB)

Anand, A. [Enbridge Corp., Edmonton, AB (Canada)

2009-07-01

The supply of crude oil from the Western Canada Sedimentary Basin is expected to increase by approximately 2.1 million barrels per day by 2015. The crudes that Enbridge handles range from 19 API to 40 API and 0.1 per cent sulphur to 4.7 per cent sulphur. The diverse supply of crude oil that the Enbridge system handles includes conventional heavy, synthetic heavy, heavy high tan, heavy low residual, medium, light sour, heavy sour, light sweet, light sweet synthetic, condensate and olefinic crudes. This presentation discussed Enbridge's plans for infrastructure expansion, crude types and quality assurance program. The company's infrastructure plans include the expansion of regional pipelines to bring more supplies to the mainline; expansion of the mainline capacity to existing markets; and providing pipeline access to new markets. Merchant storage terminals will be provided in some locations. The quality of various crude types will be maintained through judicious sequencing and tank bottoms crossings. tabs., figs.

Deep hydrotreating of middle distillates from crude and shale oils

Energy Technology Data Exchange (ETDEWEB)

Landau, M.V. [The Blechner Center for Industrial Catalysis and Process Development, Ben-Gurion University of the Negev, Beer-Sheva (Israel)

1997-06-20

The potential scientific and technological solutions to the problems that appear as a result of shifting the hydrotreating of crude oil middle distillates and shale oils from the `normal` to the `deep` mode are considered on the basis of the reactivities and transformation routes of the least-reactive sulfur-, nitrogen-, and oxygen-containing compounds. The efficiency of selecting the optimal feedstock, increasing the process severity, improving the catalysts activity, and using alternative catalytic routes are compared, taking into account the specific issues related to deep hydrodesulfurization/hydrodenitrogenation/hydrodeoxygenation, i.e., chemical aspects, kinetics and catalysts

The dynamics of crude oil price differentials

International Nuclear Information System (INIS)

Fattouh, Bassam

2010-01-01

Crude oil price differentials are modelled as a two-regime threshold autoregressive (TAR) process using the method proposed by Caner and Hansen [Caner, M., Hansen, B.E. Threshold autoregression with a unit root. Econometrica 2001; 69; 1555-1596.]. While standard unit root tests suggest that the prices of crude oil of different varieties move closely together such that their price differential is stationary, the TAR results indicate strong evidence of threshold effects in the adjustment process to the long-run equilibrium. These findings suggest that crude oil prices are linked and thus at the very general level, the oil market is 'one great pool' (Adelman, M.A. International oil agreements. The Energy Journal 1984; 5; 1-9.). However, differences in the dynamics of adjustment suggest that within this one pool, oil markets are not necessarily integrated in every time period and hence the dynamics of crude oil price differentials may not follow a stationary process at all times. Although the development of a liquid futures market around the crude oil benchmarks has helped make some distant markets more unified, arbitrage is not costless or risk-free and temporary breakdowns in the benchmarks can lead to decoupling of crude oil prices. (author)

Fabrication and study of stability of Ca2AlWO5,5 ceramic in crude petroleum for applications in petroleum industry

International Nuclear Information System (INIS)

Yadava, Y.P.; Silva, N.D.G.; Sousa, A.G. de; Sanguinetti Ferreira, R.A.

2010-01-01

Perovskite-type ceramic oxides or their derivatives are used for applications in high technology because of their enormous range of physic-chemical properties with little change in structural characteristics. In this paper we report manufacture ceramic components of a new ceramic Ca 2 AlWO 5,5 by thermo-mechanical process. Stoichiometric amounts of chemical constituents with high degree of purity, were homogenized using a ball mill and high purity alumina balls, compacted by uniaxial pressing and annealed at 1200 deg C for 48 hours. The structural characterization studied by x-ray diffraction that this material has a typical complex ordered cubic perovskite structure. For the study the stability of these ceramics in crude petroleum circular discs of 20 mm diameter and 2 mm thickness were produced and sintering. These discs were submerged in crude petroleum for 15, 30 and 45 days and were examined at each stage by X-ray diffraction, optical microscopy and hardness testing and these results show that Ca 2 AlWO 5,5 are stable in crude petroleum environment. (author)

Anti-microorganism contamination measures for crude drugs utilizing radiation sterilization

International Nuclear Information System (INIS)

Kimura, Syojiro

1998-01-01

Crude drugs are manufactured by simple processing of natural mineral, animal or plant part materials, and are used in Chinese medicine. Because these components are originated by nature, they tend to have a much higher level of contaminating microorganisms than chemically synthesized compound. Many plant-derived crude drugs contain bacteria; 10 3 -10 5 cells/g and fungi; 10 2 -10 4 spores/g. Some animal-derived crude drugs contain bacteria levels of up to 10 8 cells/g, including dangerous varieties like E. coli or Salmonella. The survival rate and the required dose can be quantified as follows: N/No=e -kD and SD=D 10 x log (No/SAL), respectively. Where, k is the sterilization constant of microorganism, No is the initial count of bacteria, D is the absorbed dose, D 10 is the dose required to decrease the count to 1/10 and SAL is the count limit or sterilization assurance. The D 10 value for general microorganism is approximately 2 kGy for bacteria, 1 kGy for fungi, and 3-4 kGy for spore-forming bacteria. The results of our past studies have shown that the dose of 5-7 kGy is necessary to sterilize general microorganism that are attached to crude drugs. Besides, the D 10 value of specific bacteria ranges from 0.1 to 0.8 kGy, so the above dose should be sufficient for sterilizing the specific microorganism (SAL; 10 -6 ). The stability of crude drugs can be quantified be the following formula, C/Co=e -k'D . Where, C/Co is the residual rate of drug components, and k' is the loss coefficient. The value of k is 1-2, but that of k' is three to four figures smaller. The C/Co ratio of most drug components is more than 0.99 with a dose of 5-7 kGy. Furthermore, radiolysis materials that are decomposed by radiation are similar to compounds that are decomposed by ultraviolet rays or sunlight. 60 Co ray are suitable for sterilizing raw materials. On the other hand, electron beams are used to sterilize a thin layer of pulverized specimens, and can be incorporated into the

Oil spill dispersants. Risk assessment for Swedish waters

International Nuclear Information System (INIS)

Lindgren, C.; Lager, H.; Fejes, J.

2001-12-01

IVL has compiled a list of the international usage of oil spill dispersants and presents the technical limitations with the use of such agents as well as the biological effects of these chemical products. IVL, has also conducted an analysis of the pros and cons to using dispersants against oil spills in waters and has applied this with a risk assessment of chemical methods to combat oil spills in the Kattegat and Skagerrak and the Baltic Sea

Study of crude and plasma-treated heavy oil by low- and high-field 1H NMR

Energy Technology Data Exchange (ETDEWEB)

Honorato, Hercilio D. A.; Silva, Renzo C.; Junior, Valdemar Lacerda; Castro, Eustaquio V. R. de; Freitas, Jair C. C. [Research and Methodology Development Laboratory for Crude Oil Analysis - LabPetro, Department of Chemistry, Federal University of Espirito Santo (Brazil)], email: jairccfreitas@yahoo.com.br; Piumbini, Cleiton K.; Cunha, Alfredo G.; Emmerich, Francisco G. [Department of Physics, Federal University of Espirito Santo (Brazil); Souza, Andre A. de; Bonagamba, Tito J. [Institute of Physics of Sao Carlos, University of Sao Paulo (Brazil)

2010-07-01

This document is intended to describe the combination of H low-field NMR and thermogravimetry (TG), rheological measurement and H high-field NMR to assess the physical and chemical changes that can occur in a heavy crude oil from treatment in a plasma reactor. This research was done using a heavy crude oil, API gravity of 10.1, which was treated in a double dielectric barrier (DDB) plasma reactor using different plasma gases: natural gas (NG), C02 or H2. The low-field HNMR experiments were conducted in a Maran Ultra spectrometer, from Oxford Instruments, at 27.5? C. After rheological analysis, a reduction in the viscosity of the plasma-treated oils in comparison to that of the crude oil was observed. Finally, it was confirmed that the use of H low-field NMR relaxometry and H high-field NMR spectroscopy allowed a separate analysis of the effects of the plasma treatment on the water and oil fractions to be made.

Pengaruh Penambahan Kosubstrat pada Biodegradasi Crude Oil

Directory of Open Access Journals (Sweden)

Any Juliani

2016-06-01

Full Text Available Kegiatan penambangan minyak bumi tidak hanya dilakukan oleh perusahaan-perusahaan besar, tetapi juga oleh masyarakat secara tradisional. Potensi pencemaran lingkungan yang ditimbulkan oleh kegiatan penambangan rakyat ini menjadi lebih tinggi karena pengelolaannya yang tradisional. Salah satu jenis pencemaran yang ditimbulkannya misalnya adalah tanah atau perairan yang tercemar oleh minyak bumi (crude oil pada saat berlangsungnya kegiatan penambangan. Salah satu upaya untuk dapat mengatasinya adalah dengan bioremediasi. Bioremediasi merupakan teknologi pengolahan pencemar dengan memanfaatkan aktivitas mikroba, terutama dari golongan bakteri. Bioremediasi tersebut harus melibatkan bakteri yang memiliki kapasitas metabolic untuk melakukan biodegradasi terhadap crude oil tersebut. Crude oil sendiri pada dasarnya merupakan senyawa hidrokarbon yang merupakan sumber karbon yang kaya bagi mikroba. Namun demikian, biodegradasi crude oil relative lebih sulit dilakukan karena karakteristiknya yang merupakan senyawa dengan berat molekul dan ukuran yang besar. Oleh karena itu penambahan kosubstrat yang lebih sederhana dapat dilakukan untuk membantu biodegradasi terutama pada tahap awal proses. Penelitian ini dilakukan untuk mengetahui pengaruh penambahan kosubstrat dalam hal ini glukosa terhadap biodegradasi crude oil. Penelitian dilakukan dalam media cair dengan bioaugmentasi melalui penambahan inoculum bakteri yang diisolasi dari tanah yang dikondisikan terhadap crude oil dalam beberapa variasi reactor. Indikasi terjadinya biodegradasi diperiksa melalui pengukuran terhadap parameter Total Petroleum Hydrocarbon (TPH dan Total Plate Count (TPC. Hasil penelitian menunjukkan bahwa penambahan kosubstrat glukosa memberikan pengaruh positif terhadap penurunan TPH. Penurunan TPH tertinggi setelah 28 hari adalah sebesar 25,3 % yang diberikan oleh reactor dengan penambahan kosubstrat serta konsentrasi crude oil awal sebesar 8.1 %. Sementara itu reactor tanpa

Evolution of the Macondo well blowout: simulating the effects of the circulation and synthetic dispersants on the subsea oil transport.

Science.gov (United States)

Paris, Claire B; Hénaff, Matthieu Le; Aman, Zachary M; Subramaniam, Ajit; Helgers, Judith; Wang, Dong-Ping; Kourafalou, Vassiliki H; Srinivasan, Ashwanth

2012-12-18

During the Deepwater Horizon incident, crude oil flowed into the Gulf of Mexico from 1522 m underwater. In an effort to prevent the oil from rising to the surface, synthetic dispersants were applied at the wellhead. However, uncertainties in the formation of oil droplets and difficulties in measuring their size in the water column, complicated further assessment of the potential effect of the dispersant on the subsea-to-surface oil partition. We adapted a coupled hydrodynamic and stochastic buoyant particle-tracking model to the transport and fate of hydrocarbon fractions and simulated the far-field transport of the oil from the intrusion depth. The evaluated model represented a baseline for numerical experiments where we varied the distributions of particle sizes and thus oil mass. The experiments allowed to quantify the relative effects of chemical dispersion, vertical currents, and inertial buoyancy motion on oil rise velocities. We present a plausible model scenario, where some oil is trapped at depth through shear emulsification due to the particular conditions of the Macondo blowout. Assuming effective mixing of the synthetic dispersants at the wellhead, the model indicates that the submerged oil mass is shifted deeper, decreasing only marginally the amount of oil surfacing. In this scenario, the oil rises slowly to the surface or stays immersed. This suggests that other mechanisms may have contributed to the rapid surfacing of oil-gas mixture observed initially. The study also reveals local topographic and hydrodynamic processes that influence the oil transport in eddies and multiple layers. This numerical approach provides novel insights on oil transport mechanisms from deep blowouts and on gauging the subsea use of synthetic dispersant in mitigating coastal damage.

Reducing the cadmium content of crude phosphates and mineral fertilizers

Energy Technology Data Exchange (ETDEWEB)

Plessen, H von; Schimmel, G

1987-10-01

Crude sedimentary phosphates generally contain cadmium together with traces of other heavy metals. These Cd traces generally end up in fertilizers produced from the crude phosphates. Processes have therefore been developed to separate the Cd from the crude phosphate or from the crude phosphoric acids arising therefrom as intermediates. In this way, the Cd content of the crude phosphate can be reduced to less the 10% of its original value, and to 50% thereof by extractive treatment with acidic calcium nitrate solution. Older calcination processes for crude phosphate have been improved to give residual Cd contents of 10 to 50% at temperatures of 800 to 1000/sup 0/C. Cadmium can be removed almost quantitatively from crude phosphate by means of dialkyl dithiophosphoric acid esters by extraction, binding to adsorbents, or ion flotation. Cadmium can be extracted from crude acids in high yield by long-chained amines. After partial neutralization of the crude acids, precipitation as cadmium sulphide is also possible.

Toxicity of dispersant application: Biomarkers responses in gills of juvenile golden grey mullet (Liza aurata).

Science.gov (United States)

Milinkovitch, Thomas; Godefroy, Joachim; Théron, Michaël; Thomas-Guyon, Hélène

2011-10-01

Dispersant use in nearshore areas is likely to increase the exposure of aquatic organisms to petroleum. To measure the toxicity of this controversial response technique, golden grey mullets (Liza aurata) were exposed to mechanically dispersed oil, chemically dispersed oil, dispersant alone in seawater, water-soluble fraction of oil and to seawater as a control treatment. Several biomarkers were assessed in the gills (enzymatic antioxidant activities, glutathione content, lipid peroxidation) and in the gallbladder (polycylic aromatic hydrocarbons metabolites). The significant differences between chemically dispersed oil and water soluble fraction of oil highlight the environmental risk to disperse an oil slick when containment and recovery can be conducted. The lack of significance between chemically and mechanically dispersed oil suggests that dispersant application is no more toxic than the natural dispersion of the oil slick. The results of this study are of interest in order to establish dispersant use policies in nearshore areas. Copyright © 2011 Elsevier Ltd. All rights reserved.

Crude oil pricing report, issue 89, December 1992

International Nuclear Information System (INIS)

1992-01-01

This report is prepared by the Canadian Oil Markets and Emergency Planning Division (COMEP), Energy, Mines and Resources Canada. It provides a reference for domestic and imported crude oil prices in Canadian markets and illustrates the competitive position of Canadian crude in the U.S. market. The information in this report is in part based on the Crude Oil Pricing Survey (COPS), conducted by COMEP, of Canadian refiners' domestic crude oil purchases, refinery receipts, imports and data from trade publications as well as industry pricing bulletins. 8 tabs

Effect of incubation time of sago (metroxylon sago) waste by local microorganism ″ginta″ on ph, crude protein, and crude fiber content

Science.gov (United States)

Ginting, Nurzainah; Pase, E.

2018-03-01

This study aims to examine the effect of incubation times of sago waste by local microorganism (MOL) “Ginta” to the crude protein and crude fiber content in relation to finding a cheap and good quality ruminants feed alternative. Incubation times were 0 hours to 144 hours. The data obtained were analyzed using Completely Randomize Design consisting of seven treatments and three replications. The result showed that the duration of incubation of sago waste by local microorganism (MOL) “Ginta” caused pH reduction, improved crude protein and crude fiber content. pH reduction was from 7.03 at 0 hour to 4.05 at 144 hours incubation. The highest increased in crude protein was H6U3 (5.58%) : 144 hours incubation and the lowest was H0U2 (3.22%) : 0 hour incubation while the highest crude fiber was H0U1 (19.99%) : 0 hour incubation and the lowest was H6U3 (18.23%) : 144 hours incubation. It can be concluded that incubation of sago waste triggered lower pH, higher crude protein and lower crude fiber than uninoculated. A recommendation could be given on using MOL ‘Ginta” in order to produce a cheap and good quality ruminans feed alternative.

Microwave-gamma ray water in crude monitor

International Nuclear Information System (INIS)

Paap, H.J.

1984-01-01

A microwave-gamma ray water-in-crude monitoring system measures the percent quantity of fresh water or salt water in crude oil flowing in a pipe line. The system includes a measuring cell arranged with the pipe line so that the crude oil flows through the measuring cell. A microwave transmitter subsystem and a gamma ray source are arranged with the measuring cell so that microwave energy and gamma rays are transmitted through the measuring cell. A microwave receiving subsystem and a gamma ray detector provide signals corresponding to received microwave energy and to the received gamma rays, respectively. Apparatus connected to the microwave receiver and to the gamma ray detector provides an indication of the percentage of water in the crude oil

Crude glycerin in diets for feedlot Nellore cattle

Directory of Open Access Journals (Sweden)

Eric Haydt Castello Branco van Cleef

2014-02-01

Full Text Available Two studies were conducted to evaluate the effects of crude glycerin on feed intake, performance, carcass characteristics, and total digestibility of Nellore bulls. In experiment 1, cattle (n = 30 were fed a control diet without crude glycerin and diets containing 7.5, 15, 22.5, and 30% crude glycerin, for 103 d. Animals were harvested and data of carcass characteristics were collected. In experiment 2, a digestibility trial was performed using indigestible acid detergent fiber (iADF as internal marker, and five rumen-cannulated steers. Both experiments were conducted as a randomized complete block design and data were analyzed using mixed procedures. In experiment 1 no differences were observed among treatments on dry matter intake, and performance variables. Regarding carcass characteristics, no effect was observed, except for carcass fat estimates, which were greater in treatments with crude glycerin. In experiment 2, crude glycerin promoted a decrease in digestibility of fibrous fractions NDF and HEM, and increased digestibility of crude protein by 6%. Although it caused negative effect on digestibility of fibrous fraction of diets, crude glycerin can be a good energy source for Nellore bulls, since no losses are observed on performance and carcass characteristics when animals are fed up to 30% of this by-product.

10 CFR 212.78 - Tertiary incentive crude oil.

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Tertiary incentive crude oil. 212.78 Section 212.78 Energy DEPARTMENT OF ENERGY OIL MANDATORY PETROLEUM PRICE REGULATIONS Producers of Crude Oil § 212.78 Tertiary incentive crude oil. Annual prepaid expenses report. By January 31 of each year after 1980, the project...

Mercury in Canadian crude oil

International Nuclear Information System (INIS)

Hollebone, B.P.

2005-01-01

Estimates for average mercury concentrations in crude oil range widely from 10 ng/g of oil to 3,500 ng/g of oil. With such a broad range of estimates, it is difficult to determine the contributions of the petroleum sector to the total budget of mercury emissions. In response to concerns that the combustion of petroleum products may be a major source of air-borne mercury pollution, Environment Canada and the Canadian Petroleum Products Institute has undertaken a survey of the average total mercury concentration in crude oil processed in Canadian refineries. In order to calculate the potential upper limit of total mercury in all refined products, samples of more than 30 different types of crude oil collected from refineries were measured for their concentration of mercury as it enters into a refinery before processing. High temperature combustion, cold vapour atomic absorption and cold vapour atomic fluorescence were the techniques used to quantify mercury in the samples. The results of the study provide information on the total mass of mercury present in crude oil processed in Canada each year. Results can be used to determine the impact of vehicle exhaust emissions to the overall Canadian mercury emission budget. 17 refs., 2 tabs., 2 figs

Fuel oil and dispersant toxicity to the Antarctic sea urchin (Sterechinus neumayeri).

Science.gov (United States)

Alexander, Frances J; King, Catherine K; Reichelt-Brushett, Amanda J; Harrison, Peter L

2017-06-01

The risk of a major marine fuel spill in Antarctic waters is increasing, yet there are currently no standard or suitable response methods under extreme Antarctic conditions. Fuel dispersants may present a possible solution; however, little data exist on the toxicity of dispersants or fuels to Antarctic species, thereby preventing informed management decisions. Larval development toxicity tests using 3 life history stages of the Antarctic sea urchin (Sterechinus neumayeri) were completed to assess the toxicity of physically dispersed, chemically dispersed, and dispersant-only water-accommodated fractions (WAFs) of an intermediate fuel oil (IFO 180, BP) and the chemical dispersant Slickgone NS (Dasic International). Despite much lower total petroleum hydrocarbon concentrations, physically dispersed fuels contained higher proportions of low-to-intermediate weight carbon compounds and were generally at least an order of magnitude more toxic than chemically dispersed fuels. Based on concentrations that caused 50% abnormality (EC50) values, the embryonic unhatched blastula life stage was the least affected by fuels and dispersants, whereas the larval 4-armed pluteus stage was the most sensitive. The present study is the first to investigate the possible implications of the use of fuel dispersants for fuel spill response in Antarctica. The results indicate that the use of a fuel dispersant did not increase the hydrocarbon toxicity of IFO 180 to the early life stages of Antarctic sea urchins, relative to physical dispersal. Environ Toxicol Chem 2017;36:1563-1571. © 2016 SETAC. © 2016 SETAC.

ORGANIC MATTER AND CRUDE PROTEIN DEGRADATION SYNCHRONY IN DIETS SELECTED BY RANGE GOATS.

Directory of Open Access Journals (Sweden)

Rafael Ramírez Orduña

2010-09-01

Full Text Available The study was carried out with the aim to asses the synchrony of organic matter and crude protein degradation in the rumen of diets selected by range goats through two years. Five esophageal cannulated adult male goats were used to collect extrusa samples during summer (August 9–13 and autumn (November 29 –December 3 of 2006, winter (February 20 – 24, spring (April 29 –May 5, summer (September 10–15 and autumn (December 4–8 of 2007 and winter (February 20 – 25 and spring (May 9 –13 of 2008. Extrusa samples were subjected to chemical analysis to determine organic matter (OM, crude protein (CP in situ and in vitro true digestibility of dry matter. OM and CP intake were estimated by total fecal collection. Effective extent of degradation of the OM and CP was calculated hourly and total 24 hours. From the hourly quantity of OM and CP degraded, a synchrony index of CP to OM was calculated, and from the total 24 hours degradation, degraded organic matter intake and crude protein intake were also estimated. Sampling date was the main effect that determined the variation of diet OM and CP degradation parameters. Degraded crude protein intake as a proportion of degraded OM was affected by sampling date and was correlated to rainfall. During winter of the first year degraded crude protein intake was below the requirements for maintenance or to promote growth for range goats weighing 40 kg. Even though, synchrony index between OM and CP degradation was affected by sampling date goats maintained a high synchrony index throughout the years.

Improving Aspergillus carbonarius crude enzymes for lignocellulose hydrolysis

DEFF Research Database (Denmark)

Hansen, Gustav Hammerich

and single enzyme supplementation. Fungal strains were screened in order to determine crude enzyme extracts that could be supplemented as boosters of A. carbonarius own crude enzyme extract, when applied in lignocellulose hydrolysis. The fungi originated from different environmental niches, which all had...... for their potential in hydrolysis of wheat straw both by application of monocultures and by supplementing to crude enzymes of A. carbonarius. For the crude enzymes from solid cultivations there were eight isolates that showed synergistic interaction resulting in doubling and tripling of the glucose release in wheat...... straw hydrolysis. A completely different profile of synergy was observed for crude enzymes from liquid cultivations, as there were only three isolates that enhanced glucose release. Only one of these three isolates had shown synergistic effects when cultivated in a solid medium. The screening...

Alkyl PAH in crude oil cause chronic toxicity to early life stages of fish. Volume 1

Energy Technology Data Exchange (ETDEWEB)

Hodson, P.V.; Khan, C.W.; Saravanabhavan, G.; Clarke, L.; Brown, R.S. [Queen' s Univ., Kingston, ON (Canada). School of Environmental Studies; Hollebone, B.; Wang, Z. [Environment Canada, Ottawa, ON (Canada). ; Short, J. [National Oceanic and Atmospheric Administration, Juneau, AK (United States). Auke Bay Lab; Lee, K.; King, T. [Fisheries and Oceans Canada, Dartmouth, NS (Canada). Centre for Offshore Oil and Gas Environmental Research

2007-07-01

In order to mitigate the risk to fisheries following an offshore oil spill, it is necessary to know the components of crude oil that are toxic. Chronic exposure of early life stages of fish to crude oil causes Blue Sac Disease, a syndrome characterized by induction of the cytochrome P450 (CYP1A) enzyme. In this study, effects-driven fractionation of Alaska North Slope Crude was used to identify the classes of compounds that cause CYP1A induction in juvenile rainbow trout and chronic toxicity to developing stages of Japanese medaka. Four fractions of compounds were created by low temperature vacuum distillation. This separated the constituents of oil according to their volatility within defined temperature ranges. The fractions were separated according to their boiling points. With a temperature range of 287-481 degrees C, fraction F3 was the only fraction as toxic as whole oil and induced CYPP1A enzymes of fish. Fractions containing specific classes of alkyl PAH were also collected. For all separations, the performance of the method was evaluated by the extent to which PAH were separated from aliphatics, resins and waxes, as well as by the quantitative recovery of mass in fractions and subfractions. The induction of CYP1A enzymes showed that PAH was present in all fractions that were highly toxic, but the toxicity tests indicated that not all fractions containing PAH were toxic. This research provided a scientific basis for comparing the risks of different crude oils based on chemical analyses that show the different proportions or amounts of PAH present. The results indicate which compounds of concern should be used to determine the extent and success of oil spill remediation, and provide a biological interpretation of chemical fingerprinting used to discriminate the sources of oil pollution. 15 refs., 1 tab.

Micro energy-dispersive X-ray fluoresence mapping of enamel and dental materials after chemical erosion.

Science.gov (United States)

Soares, Luís Eduardo Silva; de Oliveira, Rodrigo; Nahórny, Sídnei; Santo, Ana Maria do Espírito; Martin, Airton Abrahão

2012-10-01

Energy-dispersive X-ray fluorescence was employed to test the hypothesis that beverage consumption or mouthwash utilization will change the chemical properties of dental materials and enamel mineral content. Bovine enamel samples (n = 45) each received two cavity preparations (n = 90), each pair filled with one of three dental materials (R: nanofilled composite resin; GIC: glass-ionomer cement; RMGIC: resin-modified GIC). Furthermore, they were treated with three different solutions (S: saliva; E: erosion/Pepsi Twist®; or EM: erosion+mouthwash/Colgate Plax®). It was found that mineral loss in enamel was greater in GICE samples than in RE > RMGICE > RMGICEM > REM > GICEM. An increased percentage of Zr was found in REM indicating organic matrix degradation. Dental materials tested (R, GIC, and RMGIC) were not able to protect adjacent enamel from acid erosion by the soft drink tested. The use of mouthwash promoted protection of enamel after erosion by the soft drink. To avoid chemical dissolution by mouthwashes, protection by resin composites with surface sealants is recommended.

Towards an understanding of the role of clay minerals in crude oil formation, migration and accumulation

Science.gov (United States)

Wu, Lin Mei; Zhou, Chun Hui; Keeling, John; Tong, Dong Shen; Yu, Wei Hua

2012-12-01

This article reviews progress in the understanding of the role of clay minerals in crude oil formation, migration and accumulation. Clay minerals are involved in the formation of kerogen, catalytic cracking of kerogen into petroleum hydrocarbon, the migration of crude oil, and the continued change to hydrocarbon composition in underground petroleum reservoirs. In kerogen formation, clay minerals act as catalysts and sorbents to immobilize organic matter through ligand exchange, hydrophobic interactions and cation bridges by the mechanisms of Maillard reactions, polyphenol theory, selective preservation and sorptive protection. Clay minerals also serve as catalysts in acid-catalyzed cracking of kerogen into petroleum hydrocarbon through Lewis and Brønsted acid sites on the clay surface. The amount and type of clay mineral affect the composition of the petroleum. Brønsted acidity of clay minerals is affected by the presence and state of interlayer water, and displacement of this water is a probable driver in crude oil migration from source rocks. During crude oil migration and accumulation in reservoirs, the composition of petroleum is continually modified by interaction with clay minerals. The clays continue to function as sorbents and catalysts even while they are being transformed by diagenetic processes. The detail of chemical interactions and reaction mechanisms between clay minerals and crude oil formation remains to be fully explained but promises to provide insights with broader application, including catalytic conversion of biomass as a source of sustainable energy into the future.

Molluscicidal activity of crude water leaf extracts of Alternanthera ...

African Journals Online (AJOL)

mortality figures by the use of probit gave LC50 of 40.42 (35.15 – 46.47) for the unevaporated crude water while the evaporated crude water extract had LC50 of 48.07 (42.81 – 54.28) for the dried leaf extract. For the fresh leaves the unevaporated crude water extract had LC50 of 32.57 (27.15 – 39.08) and evaporated crude ...

Biodegradation of chlorobenzene using immobilized crude extracts ...

African Journals Online (AJOL)

SERVER

2007-10-04

Oct 4, 2007 ... immobilized crude extracts were reused for all other experiments and found that immobilization .... India which are of analytical reagent grade. .... 9. 60. 3. 1. Figure 3. Degradation of chlorobenzene by immobilized crude.

Implicit coupling of turbulent diffusion with chemical reaction mechanisms for prognostic atmospheric dispersion models

Energy Technology Data Exchange (ETDEWEB)

Berlowitz, D.R.

1996-11-01

In the last few decades the negative impact by humans on the thin atmospheric layer enveloping the earth, the basis for life on this planet, has increased steadily. In order to halt, or at least slow down this development, the knowledge and study of these anthropogenic influence has to be increased and possible remedies have to be suggested. An important tool for these studies are computer models. With their help the atmospheric system can be approximated and the various processes, which have led to the current situation can be quantified. They also serve as an instrument to assess short or medium term strategies to reduce this human impact. However, to assure efficiency as well as accuracy, a careful analysis of the numerous processes involved in the dispersion of pollutants in the atmosphere is called for. This should help to concentrate on the essentials and also prevent excessive usage of sometimes scarce computing resources. The basis of the presented work is the EUMAC Zooming Model (ETM), and particularly the component calculating the dispersion of pollutants in the atmosphere, the model MARS. The model has two main parts: an explicit solver, where the advection and the horizontal diffusion of pollutants are calculated, and an implicit solution mechanism, allowing the joint computation of the change of concentration due to chemical reactions, coupled with the respective influence of the vertical diffusion of the species. The aim of this thesis is to determine particularly the influence of the horizontal components of the turbulent diffusion on the existing implicit solver of the model. Suggestions for a more comprehensive inclusion of the full three dimensional diffusion operator in the implicit solver are made. This is achieved by an appropriate operator splitting. A selection of numerical approaches to tighten the coupling of the diffusion processes with the calculation of the applied chemical reaction mechanisms are examined. (author) figs., tabs., refs.

Crude oil–corn–ethanol – nexus: A contextual approach

International Nuclear Information System (INIS)

Natanelov, Valeri; McKenzie, Andrew M.; Van Huylenbroeck, Guido

2013-01-01

This paper offers a holistic study on the complex relationships between crude oil, corn and ethanol during a turbulent period between 2006 and end of 2011. Through a holistic mapping of the current market situation and a contextual analytical design we show that there exists a strong relationship between crude oil and corn markets on one side, and crude oil and ethanol on the other. However, the price relationship between corn and ethanol was revealed to be less straightforward, and is driven by the US government fuel policy. Furthermore the study indicates that corn markets have became more prone to volatility due to ethanol production, especially when the demand for corn is high and/or the crude oil prices are high enough to create a competitive market for ethanol. - Highlights: • Strong relationship between crude oil–corn and crude oil–ethanol. • Corn–ethanol connected through a by-pass of crude oil markets. • Ethanol market has no direct impact on the price levels of corn. • Corn markets became more prone to volatility due to ethanol production

Impact of Expanded North Slope of Alaska Crude Oil Production on Crude Oil Flows in the Contiguous United States

Energy Technology Data Exchange (ETDEWEB)

DeRosa, Sean E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Flanagan, Tatiana Paz [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-05-01

The National Transportation Fuels Model was used to simulate a hypothetical increase in North Slope of Alaska crude oil production. The results show that the magnitude of production utilized depends in part on the ability of crude oil and refined products infrastructure in the contiguous United States to absorb and adjust to the additional supply. Decisions about expanding North Slope production can use the National Transportation Fuels Model take into account the effects on crude oil flows in the contiguous United States.

DOE turns down all bids for Elk Hills crude

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that the U.S. Department of Energy has rejected all bids submitted in the Mar. 5 semiannual sale of crude oil from Elk Hills Naval Petroleum Reserve (NPR-1) in California. DOE the all 19 bids for the 53,740 b/d of crude were too low. The bids ranged from $11.71 to $14.06/bbl, with the top bids for the highest quality Stevens zone crude averaging $13.25/bbl. California oil companies the they bid what the market would bear, explaining a surplus of Alaskan crude on the West Coast has driven down the price of local crudes, notably heavy crudes. DOE will extend the current oil purchase contracts through April while it issues a new request for bids. It planned to issue the solicitation Mar. 23 and receive bids Apr. 15

Forecasting volatility of crude oil markets

International Nuclear Information System (INIS)

Kang, Sang Hoon; Kang, Sang-Mok; Yoon, Seong-Min

2009-01-01

This article investigates the efficacy of a volatility model for three crude oil markets - Brent, Dubai, and West Texas Intermediate (WTI) - with regard to its ability to forecast and identify volatility stylized facts, in particular volatility persistence or long memory. In this context, we assess persistence in the volatility of the three crude oil prices using conditional volatility models. The CGARCH and FIGARCH models are better equipped to capture persistence than are the GARCH and IGARCH models. The CGARCH and FIGARCH models also provide superior performance in out-of-sample volatility forecasts. We conclude that the CGARCH and FIGARCH models are useful for modeling and forecasting persistence in the volatility of crude oil prices. (author)

Forecasting volatility of crude oil markets

Energy Technology Data Exchange (ETDEWEB)

Kang, Sang Hoon [Department of Business Administration, Gyeongsang National University, Jinju, 660-701 (Korea); Kang, Sang-Mok; Yoon, Seong-Min [Department of Economics, Pusan National University, Busan, 609-735 (Korea)

2009-01-15

This article investigates the efficacy of a volatility model for three crude oil markets - Brent, Dubai, and West Texas Intermediate (WTI) - with regard to its ability to forecast and identify volatility stylized facts, in particular volatility persistence or long memory. In this context, we assess persistence in the volatility of the three crude oil prices using conditional volatility models. The CGARCH and FIGARCH models are better equipped to capture persistence than are the GARCH and IGARCH models. The CGARCH and FIGARCH models also provide superior performance in out-of-sample volatility forecasts. We conclude that the CGARCH and FIGARCH models are useful for modeling and forecasting persistence in the volatility of crude oil prices. (author)

A study of relations between physicochemical properties of crude oils and microbiological characteristics of reservoir microflora

Science.gov (United States)

Yashchenko, I. G.; Polishchuk, Yu. M.; Peremitina, T. O.

2015-10-01

The dependence of the population and activity of reservoir microflora upon the chemical composition and viscosity of crude oils has been investigated, since it allows the problem of improvement in the technologies and enhancement of oil recovery as applied to production of difficult types of oils with anomalous properties (viscous, heavy, waxy, high resin) to be solved. The effect of the chemical composition of the oil on the number, distribution, and activity of reservoir microflora has been studied using data on the microbiological properties of reservoir water of 16 different fields in oil and gas basins of Russia, Mongolia, China, and Vietnam. Information on the physicochemical properties of crude oils of these fields has been obtained from the database created at the Institute of Petroleum Chemistry, Siberian Branch on the physicochemical properties of oils throughout the world. It has been found that formation water in viscous oil reservoirs is char acterized by a large population of heterotrophic and sulfate reducing bacteria and the water of oil fields with a high paraffin content, by population of denitrifying bacteria.

Rate of biodegradation of crude oil by microorganisms isolated from ...

African Journals Online (AJOL)

The rate of biodegradation of crude oil by micro-organisms isolated from crude oil sludge environment in Eket, Akwa Ibom State of Nigeria was studied. Mineral salt medium supplemented with crude oil was used and three most abundant species isolated from a crude oil sludged soil - Micrococcus varians, Bacillus subtilis ...

The effect of several crude oils and some petroleum distillation fractions on intestinal absorption in ducklings (Anas platyhynchos).

Science.gov (United States)

Crocker, A D; Cronshaw, J; Holmes, W N

1975-01-01

Ducklings given hypertonic saline drinking water show significant increases in the rates of Na+ and water transfer across the intestinal mucosa. These increased rates of transfer are maintained as long as the birds are fed dypertonic saline. Oral administration of a single small dose of crude oil had no effect on the basal rate of mucosal transfer in freshwater-maintained ducklings but the adaptive response of the mucosa is suppressed in birds given hypertonic saline. When crude oils from eight different geographical locations were tested, the degree of inhibition varied between them; the greatest and smallest degrees of inhibition being observed following administration of Kuwait and North Slope, Alaska, crude oils respectively. The effects of distallation fractions derived from two chemically different crude oils were also examined. The volume of each distallation fraction administered corresponded to its relative abundance in the crude oil from which it was derived. The inhibitory effect was not associated exclusively with the same distallation fractions from each oil. A highly naphthenic crude oil from the San Joaquin Valley, California, showed the greatest inhibitory activity in the least abundant (2%), low boiling point (smaller than 245 degrees C) fraction and the least inhibitory activity in the highest boiling point (greater than 482 degrees C) most abundant (47%) fraction. In contrast, a highly paraffinic crude oil from Paradox Basin, Utah, showed the greatest inhibitory effect with the highest boiling point fraction and a minimal effect with the lowest boiling point fraction; the relative abundances of these two fractions in the crude oil represented 27 and 28% respectively. Water-soluble extracts of both crude oils also had inhibitory effects on mucosal transfer rates and these roughly proportionate to the inhibitory potency of the low boiling point fraction of each oil. Weathered samples of San Joaquin Valley, California, and the Paradox Basin, Utah

Effect of biosurfactants on crude oil desorption and mobilization in a soil system

Energy Technology Data Exchange (ETDEWEB)

Kuyukina, M.S.; Ivshina, I.B. [Ural Branch of the Russian Academy of Sciences, Perm (Russian Federation). Institute of Ecology and Genetics of Microorganisms; Makarov, S.O.; Litvinenko, L.V. [Perm State University, Perm (Russian Federation); Cunningham, C.J. [University of Edinburgh (United Kingdom). Contaminated Land Assessment and Remediation Research Centre; Philp, J.C. [Napier University, Edinburgh (United Kingdom). School of Life Sciences

2005-02-01

Microbially produced biosurfactants were studied to enhance crude oil desorption and mobilization in model soil column systems. The ability of biosurfactants from Rhodococcus ruber to remove the oil from the soil core was 1.4-2.3 times greater than that of a synthetic surfactant of suitable properties, Tween 60. Biosurfactant-enhanced oil mobilization was temperature-related, and it was slower at 15{sup o}C than at 22-28{sup o}C. Mathematical modelling using a one-dimensional filtration model was applied to simulate the process of oil penetration through a soil column in the presence of (bio)surfactants. A strong positive correlation (R{sup 2} = 0.99) was found between surfactant penetration through oil-contaminated soil and oil removal activity. Biosurfactant was less adsorbed to soil components than synthetic surfactant, thus rapidly penetrating through the soil column and effectively removing 65-82% of crude oil. Chemical analysis showed that crude oil removed by biosurfactant contained a lower proportion of high-molecular-weight paraffins and asphaltenes, the most nonbiodegradable compounds, compared to initial oil composition. This result suggests that oil mobilized by biosurfactants could be easily biodegraded by soil bacteria. Rhodococcus biosurfactants can be used for in situ remediation of oil-contaminated soils. (author)

Microbial activity in Alaskan taiga soils contaminated by crude oil in 1976

International Nuclear Information System (INIS)

Monroe, E.M.; Lindstrom, J.E.; Brown, E.J.; Raddock, J.F.

1995-01-01

Biodegradation, often measured via microbial activity, includes destruction of environmental pollutants by living microorganisms and is dependent upon many physical and chemical factors. Effects of mineral nutrients and organic matter on biodegradation of Prudhoe Bay crude oil were investigated at a nineteen-year-old oil spill site in Alaskan taiga. Microcosms of two different soil types from the spill site; one undeveloped soil with forest litter and detritus (O horizon) and one more developed with lower organic content (A horizon), were treated with various nitrogen and phosphorus amendments, and incubated for up to six weeks. Each microcosm was sampled periodically and assayed for hydrocarbon mineralization potential using radiorespirometry, for total carbon dioxide respired using gas chromatography, and for numbers of hydrocarbon-degrading bacteria and heterotrophic bacteria using most probable number counting techniques. Organic matter in the O horizon soil along with combinations of mineral nutrients were found to stimulate microbial activity. No combination of mineral nutrient additions to the A horizon soil stimulated any of the parameters above those measured in control microcosms. The results of this study indicate that adding mineral nutrients and tilling the O horizon into the A horizon of subarctic soils contaminated with crude oil, would stimulate microbial activity, and therefore the biodegradation potential, ultimately increasing the rate of destruction of crude oil in these soils

Crude oil options market found to be efficient

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that the U.S. crude oil options market operates efficiently and does not overreact. The authors, with the JFK School of Government, studied the crude oil options market under a Department of Energy grant. The current market was created in November 1986 when the New York Mercantile Exchange introduced an options contract for delivery of West Texas intermediate crude futures. it has grown greatly since then

Aqueous solubility, dispersibility and toxicity of biodiesels

International Nuclear Information System (INIS)

Hollebone, B.P.; Fieldhouse, B.; Lumley, T.C.; Landriault, M.; Doe, K.; Jackman, P.

2007-01-01

The renewed interest in the use of biological fuels can be attributed to that fact that feedstocks for fatty-acid ester biodiesels are renewable and can be reclaimed from waste. Although there are significant benefits to using biodiesels, their increased use leaves potential for accidental release to the environment. Therefore, their environmental behaviours and impacts must be evaluated along with the risk associated with their use. Biodiesel fuels may be made from soy oil, canola oil, reclaimed restaurant grease, fish oil and animal fat. The toxicological fate of biofuel depends on the variability of its chemical composition. This study provided an initial assessment of the aqueous fate and effects of biodiesel from a broad range of commonly available feedstocks and their blends with petroleum diesels. The study focused primarily on the fate and impact of these fuels in fresh-water. The use of chemical dispersion as a countermeasure for saltwater was also investigated. The exposure of aquatic ecosystems to biodiesels and petroleum diesel occurs via the transfer of material from the non-aqueous phase liquid (NAPL) into the aqueous phase, as both soluble and dispersed components. The aqueous solubilities of the fuels were determined from the equilibrium water-accommodated fraction concentrations. The acute toxicities of many biodiesels were reported for 3 test species used by Environment Canada for toxicological evaluation, namely rainbow trout, the water flea and a luminescent bacterium. This study also evaluated the natural potential for dispersion of the fuels in the water column in both low and high-energy wave conditions. Chemical dispersion as a potential countermeasure for biodiesel spills was also evaluated using solubility testing, acute toxicity testing, and dispersibility testing. It was shown that biodiesels have much different fates and impacts from petroleum diesels. The compounds partitioning into the water column are also very different for each

The crude petroleum and natural gas industry, 1995

International Nuclear Information System (INIS)

1996-01-01

A compilation of data regarding the crude petroleum and natural gas industry was presented. This industry includes establishments engaged in exploration for, or production of petroleum or natural gas from wells or tar sands. Data presented in this publication include: the supply and disposition of crude oil and natural gas, operating and capital expenditures of approximately 500 companies of the oil and natural gas industry, drilling completions, and crude oil and natural gas reserves. Data about the oil sands industry is reported in another volume. Much of the data was obtained from the Canadian Association of Petroleum Producers. Overall, in 1995 Canadian natural gas production rose 6.7%; exports of crude oil rose 7.7%. 8 tabs., 2 figs

Study of the phenomena of crystallization of paraffin in the fluid-dynamic behavior of paraffinic crude - Phase 1

International Nuclear Information System (INIS)

Rodriguez, L; Castaneda, M

2001-01-01

The results obtained by relating the formation of wax crystals using traditional measurements such as cloud point, pour point and viscosity show the importance of analyzing the interactions among the chemical nature of crude oils, the physical-chemical variables and the fluid dynamics that cause different shapes and rates of crystallization. In addition, the specific value of viscosity should be measured at a certain temperature, as well as the rheological behavior of the crude oils during the process of formation and destruction of crystals due to shear rate. In order to carry out this study, a group of waxy crude oils was chosen. They were characterized considering the parameters mentioned above, and they were subjected to different cooling rates to microscopically observe the resulting morphologies, and to relate them to rheological behavior in a range of similar conditions that are obtained during hydrocarbon transport through pipelines. For this effect, laboratory tests were carried out, in addition to the scaling of results at the pilot plant level in a simulator to analyze the behavior of the fluids in dynamic or static conditions, in relation to prolonged pipeline downtime. This type of studies improves operational safety, offers considerable savings on additives, power, an increase in pumping capacity, and it also facilitates the selection of the most appropriate technology to control wax deposition

Liquid agents for dispersion of hard alloys

International Nuclear Information System (INIS)

Putintseva, M.N.

2006-01-01

Effects of dispersant properties on granulometric, chemical, and phase composition of the products of WC hard alloy electroerosion are considered. It is established that an increase of liquid dispersant permittivity results in enhanced powder dispersity, and an increase of boiling temperature and kinematic viscosity of a hydrocarbon liquid promotes a carbon loss from WC and intensifies pyrolysis of the liquid.On electroerosion of WC base hard alloy in oil a powder particle consists of b-WC+W 2 C phases, in kerosine - of a-WC+b-WC, in distilled water - of W+W 2 C. The viscosity of liquid dispersants practically has no effect on powder particle size [ru

Separation and characterization of resins and asphaltenes coming from Castilla crude Evaluation of their molecular interaction

International Nuclear Information System (INIS)

Navarro, Lina; Alvarez, Mario; Grosso, Jorge Luis; Navarro, Uriel

2004-01-01

The study of resins and asphaltenes, the heaviest fractions of oil, has become an area of interest due to the abundance of heavy crude oils in Colombia and Latin America. We studied the chemical composition of the heavy fractions of Castilla crude oil, evaluated some of its molecular parameters and found evidence of the interaction between the resins extracted from the crude with the asphaltenes of the original crude. With this objective, we carried out at the pilot plant level precipitation of the resin-asphaltene (R-A) aggregate by adding and mixing under controlled conditions, a paraffin solvent, from the Apiay refinery, called Apiasol. By extracting Soxhlet with the same solvent, resin 1 of aggregate R-A was separated. Resin ll defined as the soluble fraction that is part of the maltenes, was separated from the deasphalted crude by open column chromatography, using alumina as support, according to the SAR method (Saturated, Aromatics, Resins). The fractions of resins and the asphaltenes obtained, were characterized by: Nuclear Magnetic Resonance (NMR), FT-lR, DRX, elementary analysis (C, H, N, S), metal content (Ni and V), distribution of molecular weight by GPC, and average molecular weight by VPO. The results obtained show evidence that resin l which is part of the aggregate has less average molecular weight than resin ll which is present in the fraction of maltenes. In addition, some changes were found in the elementary analysis of among the resins. On the one hand, and taking into account the existing theories of molecular interactions among these fractions, it was found that the resins l separated from the R-A aggregate, when added to the crude, they stabilize their asphaltenes. This evaluation was carried out by analyzing the flocculation point of the crude and its mixtures with 1,9% and 3,8% of resin l, when they are titrated with a precipitating agent in an NIR cell that works with high pressure and temperature

Contents of lecithin and choline in crude drugs.

Science.gov (United States)

Yamasaki, K; Kikuoka, M; Nishi, H; Kokusenya, Y; Miyamoto, T; Matsuo, M; Sato, T

1994-01-01

The determination of lecithin and choline in crude drugs was established by a combination of high performance liquid chromatography (HPLC) with electrochemical detector (ECD) and enzyme reaction. Lecithin in crude drugs extracted with a mixture of chloroform-methanol (2:1) at room temperature was hydrolyzed by phospholipase D. The hydrolyzate was injected to HPLC, and choline was separated from impurities by reverse phase column. The choline was converted to betaine and hydrogen peroxide by passing through column packed with immobilized choline oxidase. This hydrogen peroxide was detected by ECD. The peak area of hydrogen peroxide derived from lecithin was proportional to the concentration of lecithin from 0.10 to 1.52 microgram/ml. Choline in crude drugs was extracted with ethanol under reflux and determined under the same HPLC conditions as lecithin. The peak area of hydrogen peroxide derived from choline was proportional to the concentration of choline from 0.01 to 0.45 microgram/ml. The contents of lecithin and choline in 31 kinds of crude drugs were determined by these established methods. The results showed that Cervi Parvum Cornu, Kokurozin, Foenigraeci Semen and Psoraleae Semen contained more lecithin than other crude drugs, while Angelicae Radix, Foenigraeci Semen, Psoraleae Semen, and especially Hippocampus were found to contain more choline than other crude drugs.

When Will Occur the Crude Oil Bubbles?

International Nuclear Information System (INIS)

Su, Chi-Wei; Li, Zheng-Zheng; Chang, Hsu-Ling; Lobonţ, Oana-Ramona

2017-01-01

In this paper, we apply a recursive unit root test to investigate whether there exist multiple bubbles in crude oil price. The method is best suited for a practical implementation of a time series and delivers a consistent date-stamping strategy for the origination and termination of multiple bubbles. The empirical result indicates that there exist six bubbles during 1986–2016 when the oil price deviate from its intrinsic value based on market fundamentals. Specifically, oil price contains the fundamentals and bubble components. The dates of the bubbles correspond to specific events in the politics and financial markets. The authorities should actively fight speculative bubbles or just observe their evolutions and speculation activities may decrease, which is favour of the stabilisation of the staple commodities including crude oil price. These findings have important economic and policy implications to recognise the cause of bubbles and take corresponding measures to reduce the impact on the real economy cause of the fluctuation of crude oil price. - Highlights: • Investigate multiple bubbles in crude oil price. • Indicate six bubbles deviate from its intrinsic value based on market fundamentals. • The bubbles correspond to specific events in the politics and financial markets. • Reduce the impact on the real economy cause of the fluctuation of crude oil price.

Volatility persistence in crude oil markets

International Nuclear Information System (INIS)

Charles, Amélie; Darné, Olivier

2014-01-01

Financial market participants and policy-makers can benefit from a better understanding of how shocks can affect volatility over time. This study assesses the impact of structural changes and outliers on volatility persistence of three crude oil markets – Brent, West Texas Intermediate (WTI) and Organization of Petroleum Exporting Countries (OPEC) – between January 2, 1985 and June 17, 2011. We identify outliers using a new semi-parametric test based on conditional heteroscedasticity models. These large shocks can be associated with particular event patterns, such as the invasion of Kuwait by Iraq, the Operation Desert Storm, the Operation Desert Fox, and the Global Financial Crisis as well as OPEC announcements on production reduction or US announcements on crude inventories. We show that outliers can bias (i) the estimates of the parameters of the equation governing volatility dynamics; (ii) the regularity and non-negativity conditions of GARCH-type models (GARCH, IGARCH, FIGARCH and HYGARCH); and (iii) the detection of structural breaks in volatility, and thus the estimation of the persistence of the volatility. Therefore, taking into account the outliers on the volatility modelling process may improve the understanding of volatility in crude oil markets. - Highlights: • We study the impact of outliers on volatility persistence of crude oil markets. • We identify outliers and patches of outliers due to specific events. • We show that outliers can bias (i) the estimates of the parameters of GARCH models, (ii) the regularity and non-negativity conditions of GARCH-type models, (iii) the detection of structural breaks in volatility of crude oil markets

Bioremediation of crude oil contaminated tea plantation soil using ...

African Journals Online (AJOL)

Crude oil contamination of soil is a major concern for tea industry in Assam, India. Crude oil is a persistent organic contaminant which alters soil physical and biochemical characteristics and makes tea plants more susceptible against crude oil contamination. Therefore, two native bacterial strains designated as AS 03 and ...

A New Model for Describing the Rheological Behavior of Heavy and Extra Heavy Crude Oils in the Presence of Nanoparticles

Directory of Open Access Journals (Sweden)

Esteban A. Taborda

2017-12-01

Full Text Available The present work proposes for the first time a mathematical model for describing the rheological behavior of heavy and extra-heavy crude oils in the presence of nanoparticles. This model results from the combination of two existing mathematical models. The first one applies to the rheology of pseudoplastic substances, i.e., the Herschel-Bulkley model. The second one was previously developed by our research group to model the rheology of suspensions, namely the modified Pal and Rhodes model. The proposed model is applied to heavy and extra heavy crude oils in the presence of nanoparticles, considering the effects of nanoparticles concentration and surface chemical nature, temperature, and crude oil type. All the experimental data evaluated exhibited compelling goodness of fitting, and the physical parameters in the model follow correlate well with variations in viscosity. The new model is dependent of share rate and opens new possibilities for phenomenologically understanding viscosity reduction in heavy crude by adding solid nanoparticles and favoring the scale-up in enhanced oil recovery (EOR and/or improved oil recovery (IOR process.

Uptake of Total Petroleum Hydrocarbon (TPH) and Polycyclic Aromatic Hydrocarbons (PAHs) by Oryza sativa L. Grown in Soil Contaminated with Crude Oil.

Science.gov (United States)

Patowary, Rupshikha; Patowary, Kaustuvmani; Devi, Arundhuti; Kalita, Mohan Chandra; Deka, Suresh

2017-01-01

The purpose of this study was to determine whether total petroleum hydrocarbon (TPH) and polycyclic aromatic hydrocarbons (PAHs) present in crude oil contaminated sites are transferred to roots, shoots and finally the grains of rice crops (Oryza sativa L.) grown in those sites. Soil was artificially contaminated with crude oil at concentrations of 0, 1000, 5000, 10,000, and 15,000 mg/kg, followed by planting of rice seedlings. After harvest, TPH in plant samples were measured, and it was determined that the uptake of TPH by the plants gradually increased as the concentration of oil in soil increased. Further, from GC-MS analysis, it was observed that PAHs including naphthalene and phenanthrene bioaccumulated in rice plant parts. Vital physico-chemical properties of soil were also altered due to crude oil contamination. Our study revealed that rice plants grown in crude oil polluted sites can uptake TPH including PAHs, thus emphasising the importance of prior investigation of soil condition before cultivation of crops.

Chemical and biological characterization of a crude venom extract ...

African Journals Online (AJOL)

Background: Sea-anemones, in common with other members of the phylum cnidaria (coelenterate) possess numerous tentacles containing specialized stinging cells of cnidocysts. Our main objective is to elucidate the chemical character and biological properties of this Nigerian species of sea anemone Bunodosoma ...

Boom times : Canada's crude petroleum industry : analysis in brief

International Nuclear Information System (INIS)

Rowat, M.R.

2006-01-01

This document examined the trends in crude oil prices, the production and exports of Canada's crude petroleum industry, and Canada's imports of crude petroleum. As an exporter and importer of crude oil, Canada's petroleum industry is currently experiencing economic prosperity as a result of high oil prices combined with high global demand for oil. This document reviewed industry activity for 2005 and addressed the reasons for the first decline in Canadian crude oil production in 6 years. A quick review of soaring crude oil prices, supply and shortages was also presented. A review of exports revealed that since 1995, the United States has received 99 per cent of Canadian exports. Although production activity is occurring in 7 provinces, the biggest participant is Alberta, followed by Saskatchewan. In 2005, Canada produced 136.4 million cubic metres of crude petroleum, of which two-thirds came from Alberta. Saskatchewan contributed 18 per cent of total Canadian crude oil production, while offshore oil rigs in Newfoundland and Labrador contributed 13 per cent. The vast oil sands resource accounted for 42 per cent of the province's total production. Alberta oil export is piped entirely into the United States. In 2005, even with a slight drop in exports, Canadian oil exporters received $30 billion for their products, up from $25 billion the year before. Canada also supplied nearly 10 per cent of the American crude oil needs. According to the National Energy Board, Canadian refineries are approaching capacity. Canada's 19 refineries, which have a capacity of 320,000 cubic metres per day, operated at 92 per cent of capacity in 2005 to meet the needs of the domestic market. More imported petroleum was refined than Canadian sourced petroleum. In 2005, the gas and oil industry saw historically high profits, taxes paid and investments. 6 refs., 5 figs

Soil water repellency at old crude oil spill sites

International Nuclear Information System (INIS)

Roy, J.L.

1999-08-01

This thesis presents the current state of knowledge regarding the cause of soil water repellency and characterizes disaggregated nonwettable surface soils found at old crude oil spill sites. Pollution-induced water repellency generally develops following prolonged exposures of soil to liquid- or vapour-phase petroleum hydrocarbons. The condition varies significantly in terms of severity and persistence. Soil water repellency retards plant growth and disturbs the hydrological balance of ecosystems. Disaggregated water-repellent soils are also very susceptible to dispersal by erosion, posing a threat to the productivity of surrounding soils. The author described the probable causes of soil water repellency under the following three main themes: (1) accumulation of hydrophobic organic material in soil, (2) redistribution and re-organisation of this material in soil, and (3) stabilisation of the hydrophobic organic material. This final process is necessary to ensure persistence of induced water repellency symptoms. Petroleum residues as water-repellent substances in weathered nonwettable oil-contaminated soils were also discussed and a hypothesis about soil water repellency was presented which deals with flexible conformation in organic matter coatings. Processes leading to the development of soil water repellency following crude oil contamination were also described. It was determined that soil water repellency is a function of the packing density and the chain conformation of amphiphilic organic molecules in the outermost layer of soil organic matter coatings. This research suggests that the fractional coverage of alkyl chains on soil particle surfaces determines the degree of water repellency that is displayed by soil. It was shown that prompt remediation of some oil-contaminated plots can effectively prevent the development of soil water repellency. 4 refs., 32 tabs., 22 figs., 5 appendices

Standard guide for determining corrosivity of crude oils

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This guide presents some generally accepted laboratory methodologies that are used for determining the corrosivity of crude oil. 1.2 This guide does not cover detailed calculations and methods, but rather a range of approaches that have found application in evaluating the corrosivity of crude oil. 1.3 Only those methodologies that have found wide acceptance in crude oil corrosivity evaluation are considered in this guide. 1.4 This guide does not address the change in oil/water ratio caused by accumulation of water at low points in a pipeline system. 1.5 This guide is intended to assist in the selection of methodologies that can be used for determining the corrosivity of crude oil under conditions in which water is present in the liquid state (typically up to 100°C). These conditions normally occur during oil and gas production, storage, and transportation in the pipelines. 1.6 This guide does not cover the evaluation of corrosivity of crude oil at higher temperatures (typically above 300°C) that oc...

Enhanced crude oil biodegradation in soil via biostimulation.

Science.gov (United States)

Al-Saleh, Esmaeil; Hassan, Ali

2016-08-02

Research on feasible methods for the enhancement of bioremediation in soil contaminated by crude oil is vital in oil-exporting countries such as Kuwait, where crude oil is a major pollutant and the environment is hostile to biodegradation. This study investigated the possibility of enhancing crude oil bioremediation by supplementing soil with cost-effective organic materials derived from two widespread locally grown trees, Conocarpus and Tamarix. Amendments in soils increased the counts of soil microbiota by up to 98% and enhanced their activity by up to 95.5%. The increase in the biodegradation of crude oil (75%) and high levels of alkB expression substantiated the efficiency of the proposed amendment technology for the bioremediation of hydrocarbon-contaminated sites. The identification of crude-oil-degrading bacteria revealed the dominance of the genus Microbacterium (39.6%), Sphingopyxis soli (19.3%), and Bordetella petrii (19.6%) in unamended, Conocarpus-amended, and Tamarix-amended contaminated soils, respectively. Although soil amendments favored the growth of Gram-negative bacteria and reduced bacterial diversity, the structures of bacterial communities were not significantly altered.

Electrochemical lithium insertion in graphite containing dispersed tin-antimony alloys

Energy Technology Data Exchange (ETDEWEB)

Billaud, Denis; Nabais, Catarina; Mercier, Cedric [LCSM, Laboratoire de Chimie du Solide Mineral, Nancy University, BP 239, 54506 Vandoeuvre les Nancy Cedex (France); Schneider, Raphael [LCPME, Laboratoire de Chimie Physique et Microbiologie pour l' Environnement, Nancy University, Faculte de Pharmacie, BP 80 403, 54001 Nancy Cedex (France); Willmann, Patrick [CNES, Centre National d' Etudes Spatiales, 18, Avenue E. Belin, 31055 Toulouse Cedex (France)

2008-09-15

Graphite/SnSb composites were prepared by solution-phase reduction of SnCl{sub 2} and SbCl{sub 5} in the presence of graphite powder using either t-BuONa-activated NaH or t-BuOLi-activated LiH. Crude and washed materials were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and field emission gun-scanning electron microscopy (FEG-SEM). Electrochemical lithium insertion was carried out in both types of composites using voltammetry or galvanostatic charge/discharge techniques. It appeared that graphite-SnSb composites prepared using t-BuOLi-activated LiH as reductant displayed the highest reversible capacity (ca. 500 mA h g{sup -1}). This phenomenon is likely in relation with a better dispersion and grafting of metal particles on graphite, as suggested by FEG-SEM and TEM analyses. However, such dispersion appeared to increase significantly the irreversible capacity. (author)

Enhancing the functional and economical efficiency of a novel combined thermo chemical disperser disintegration of waste activated sludge for biogas production.

Science.gov (United States)

Kavitha, S; Jayashree, C; Adish Kumar, S; Kaliappan, S; Rajesh Banu, J

2014-12-01

In this investigation, an effort was made to pretreat surplus waste activated sludge (WAS) inexpensively by a novel combined process involving thermo chemical disperser pretreatment. This pretreatment was found to be efficient at a specific energy (SE) consumption of 3360.94 kJ/kg TS, with the chemical oxygen demand (COD) solubilization of 20%. This was comparatively higher than thermo chemically treated sludge where the solubilization was found to be 15.5% at a specific energy consumption of 10,330 kJ/kg TS respectively. Higher production of volatile fatty acids (VFA) (675 mg/L) in anaerobic fermentation of pretreated WAS indicates better hydrolysis performance. The biogas production potential of sludge pretreated through this combined technique was found to be 0.455 (L/gVS) and comparatively higher than thermo chemically pretreated sludge. Economic investigation provides 90% net energy savings in this combined pretreatment. Therefore, this combined process was considered to be potentially effective and economical in sludge disintegration. Copyright © 2014 Elsevier Ltd. All rights reserved.

A refined approach: Saudi Arabia moves beyond crude

International Nuclear Information System (INIS)

Krane, Jim

2015-01-01

Saudi Arabia's role in global energy markets is changing. The kingdom is reshaping itself as a supplier of refined petroleum products while moving beyond its long-held role as a simple exporter of crude oil. This change is commensurate with the typical development trajectory of a state progressing to a more advanced stage of global economic integration. Gains from increased refining include reducing fuel imports and capturing margins now bequeathed to competitors. Refining also allows the kingdom to export its heavy crude oil to a wider array of customers, beyond select importers configured to handle heavy crudes. However, the move also presents strategic complications. The world's 'swing supplier' of oil may grow less willing or able to adjust supply to suit market demands. In the process, Saudi Arabia may have to update the old “oil for security” relationship that links it with Washington, augmenting it with a more diverse set of economic and investment ties with individual companies and countries, including China. -- Highlights: •Saudi Arabia is diverting crude oil into an expanding refining sector. •In doing so, the kingdom is moving beyond its role as global “swing supplier” of crude oil. •The kingdom will benefit from increased refining, including enhanced demand for heavy crude. •Strategic complications may force it to seek security partners beyond Washington

Assessment of Antioxidant Indices after incorporating Crude Oil ...

African Journals Online (AJOL)

ADOWIE PERE

Exposure to crude oil pollution leads to the formation ... vitamin/mineral mixture (5 %). The food ..... hepatic antioxidant enzymes against cadmium induced liver ... Interaction of crude oil with alpha-tocopherol: ... Essential oil from Monodora.

Unusually high dispersion of nitrogen-doped carbon nanotubes in DNA solution.

Science.gov (United States)

Kim, Jin Hee; Kataoka, Masakazu; Fujisawa, Kazunori; Tojo, Tomohiro; Muramatsu, Hiroyuki; Vega-Díaz, Sofía M; Tristán-López, F; Hayashi, Takuya; Kim, Yoong Ahm; Endo, Morinobu; Terrones, Mauricio; Dresselhaus, Mildred S

2011-12-08

The dispersibility in a DNA solution of bundled multiwalled carbon nanotubes (MWCNTs), having different chemical functional groups on the CNT sidewall, was investigated by optical spectroscopy. We observed that the dispersibility of nitrogen (N)-doped MWCNTs was significantly higher than that of pure MWCNTs and MWCNTs synthesized in the presence of ethanol. This result is supported by the larger amount of adsorbed DNA on N-doped MWCNTs, as well as by the higher binding energy established between nucleobases and the N-doped CNTs. Pure MWCNTs are dispersed in DNA solution via van der Waals and hydrophobic interactions; in contrast, the nitrogenated sites within N-doped MWCNTs provided additional sites for interactions that are important to disperse nanotubes in DNA solutions. © 2011 American Chemical Society

Enzymatic decolourisation of Methyl Orange and Bismarck Brown using crude peroxidase from Armoracia rusticana

Science.gov (United States)

Ambatkar, Mugdha; Mukundan, Usha

2015-12-01

The decolourisation of Methyl Orange (MO) and Bismarck Brown (BB) by crude peroxidase from Armoracia rusticana (Horseradish) was studied by varying different reaction parameters. The pH of the reaction mixture, initial dye concentration, amount of enzyme and hydrogen peroxide concentration were optimised for ambient temperatures (30 ± 2 °C). The optimum pH for decolourisation was 4.0 (72.95 %) and 3.0 (79.24 %) for MO and BB, respectively. Also it was found that the Chemical Oxygen Demand of the enzyme-treated sample was significantly lower than that of the untreated controls for both dyes. The addition of a complex iron salt like Ferric EDTA was found to enhance the decolourisation of both dyes at pH 6.0, showing an increase of 8.69 % and 14.17 % in the decolourisation of MO and of BB, respectively. The present study explores the potential of crude peroxidase from horseradish to decolourise representative monoazo and diazo dyes, MO and BB, respectively. An attempt has been made to utilise a crude enzyme with appreciable activity obtained after minimal processing for the decolourisation of the aforesaid dyes. The findings of this study would find application in the enzymatic treatment of wastewater containing azo dyes.

Waxy crude oil flow restart ability

Energy Technology Data Exchange (ETDEWEB)

Sierra, Andre Gaona; Varges, Priscilla Ribeiro; Mendes, Paulo Roberto de Souza [Dept. of Mechanical Engineering. Pontificia Universidade Catolica do Rio de Janeiro, RJ (Brazil)], e-mails: prvarges@puc-rio.br, pmendes@puc-rio.br; Ziglio, Claudio [PETROBRAS S.A, R.J., Rio de Janeiro, RJ (Brazil)], e-mail: ziglio@petrobras.com.br

2010-07-01

Under the hot reservoir conditions, waxy crudes behave like Newtonian fluids but once they experience very cold temperatures on the sea floor, the heavy paraffin's begin to precipitate from the solution impacting non- Newtonian flow behavior to the crude (Chang 2000, Lee 2009, Davidson 2004) and begin to deposit on the pipe wall leave blocked of pipeline. This gel cannot be broken with the original steady state flow operating pressure applied before gelation (Chang 1998). Restarting waxy crude oil flows in pipelines is a difficult issue because of the complex rheological behavior of the gelled oil. Indeed, below the WAT, the gelled oil exhibits viscoplastic, thixotropic, temperature-dependent, and compressible properties due to the interlocking gel-like structure formed by the crystallized paraffin compounds and the thermal shrinkage of the oil. The main objective of this work is to determine the minimal pressure to restart the flow, and the relationship between the fluid rheology , pipe geometry and the restart pressure of the flow. Experiments will be performed to investigate the displacement of carbopol aqueous solutions (viscoplastic fluid without thixotropic effects) by Newtonian oil flowing through a strait pipe to validate the experimental apparatus. Therefore, tests will be made with different fluids, like Laponite and waxy crude oils. (author)

Crude Oil Remote Sensing, Characterization and Cleaning with CW and Pulsed Lasers

Science.gov (United States)

Kukhtareva, Tatiana; Chirita, Arc; Gallegos, Sonia C.

2014-01-01

For detection, identification and characterization of crude oil we combine several optical methods of remote sensing of crude oil films and emulsions (coherent fringe projection illumination (CFP), holographic in-line interferometry (HILI), and laser induced fluorescence). These methods allow the three-dimensional characterization of oil spills, important for practical applications. Combined methods of CFP and HILI are described in the frame of coherent superposition of partial interference patterns. It is shown, that in addition to detection/identification laser illumination in the green-blue region can also degrade oil slicks. Different types of surfaces contaminated by oil spills are tested: oil on the water, oil on the flat solid surfaces and oil on the curved surfaces of pipes. For the detection and monitoring of the laser-induced oil degradation in pipes, coherent fiber bundles were used. Both continuous-wave (CW) and pulsed lasers are tested using pump-probe schemes. This finding suggests that properly structured laser clean-up can be an alternative environmentally-friendly method of decontamination, as compared to the currently used chemical methods that are dangerous to environment.

The effects of short term exposure to Bass Strait crude oil and Corexit 8667 on benthic community metabolism in Posidonia australis Hook. f. dominated microcosms

Energy Technology Data Exchange (ETDEWEB)

Hatcher, A.I.; Larkum, A.W.D.

1982-03-01

Microcosms consisting of a sublittoral seagrass meadow from Botany Bay, N.S.W. were maintained in aquaria in a controlled environment room from March to August 1979. Oxygen production and consumption in the microcosms and leaf turnover of the seagrass, Posidonia australis Hook.f. were measured before, during and after a 7-day treatment in June with Bass Strait crude oil and the dispersant Corexit 8667. Four microcosms received oil and two of these received dispersant. The leaf turnover of P. australis was not significantly affected by the addition of oil and dispersant. Photosynthetic oxygen production decreased and respiration increased in the microcosms during treatment. In August, 40 days after treatment, oxygen production rates and P/R ratios in the oil-treated microcosms were higher than rates measured before treatment. The oil-and-dispersant-treated microcosms did not show this trend. The results of this study indicate that a more severe stress is placed on the P. australis dominated benthic community by oil and dispersant than by oil alone.

Application of Biosurfactants Produced by Pseudomonas putida using Crude Palm Oil (CPO) as Substrate for Crude Oil Recovery using Batch Method

Science.gov (United States)

Suryanti, V.; Handayani, D. S.; Masykur, A.; Septyaningsih, I.

2018-03-01

The application of biosurfactants which have been produced by Pseudomonas putida in nutrient broth medium supplemented with NaCl and crude palm oil (CPO) for oil recovery has been evaluated. The crude and purified biosurfactants have been examined for oil recovery from a laboratory oil-contaminated sand in agitated flask (batch method). Two synthetic surfactants and water as control was also performed for oil recovery as comparisons. Using batch method, the results showed that removing ability of crude oil from the oil-contaminated sand by purified and crude biosurfactants were 79.40±3.10 and 46.84±2.23 %, respectively. On other hand, the recoveries obtained with the SDS, Triton X-100 and water were 94.33±0.47, 74.84±7.39 and 34.42±1.21%respectively.

Biodiesel biorefinery: opportunities and challenges for microbial production of fuels and chemicals from glycerol waste.

Science.gov (United States)

Almeida, João R M; Fávaro, Léia C L; Quirino, Betania F

2012-07-18

The considerable increase in biodiesel production worldwide in the last 5 years resulted in a stoichiometric increased coproduction of crude glycerol. As an excess of crude glycerol has been produced, its value on market was reduced and it is becoming a "waste-stream" instead of a valuable "coproduct". The development of biorefineries, i.e. production of chemicals and power integrated with conversion processes of biomass into biofuels, has been singled out as a way to achieve economically viable production chains, valorize residues and coproducts, and reduce industrial waste disposal. In this sense, several alternatives aimed at the use of crude glycerol to produce fuels and chemicals by microbial fermentation have been evaluated. This review summarizes different strategies employed to produce biofuels and chemicals (1,3-propanediol, 2,3-butanediol, ethanol, n-butanol, organic acids, polyols and others) by microbial fermentation of glycerol. Initially, the industrial use of each chemical is briefly presented; then we systematically summarize and discuss the different strategies to produce each chemical, including selection and genetic engineering of producers, and optimization of process conditions to improve yield and productivity. Finally, the impact of the developments obtained until now are placed in perspective and opportunities and challenges for using crude glycerol to the development of biodiesel-based biorefineries are considered. In conclusion, the microbial fermentation of glycerol represents a remarkable alternative to add value to the biodiesel production chain helping the development of biorefineries, which will allow this biofuel to be more competitive.

The Role of Shearing Energy and Interfacial Gibbs Free Energy in the Emulsification Mechanism of Waxy Crude Oil

Directory of Open Access Journals (Sweden)

Zhihua Wang

2017-05-01

Full Text Available Crude oil is generally produced with water, and the water cut produced by oil wells is increasingly common over their lifetime, so it is inevitable to create emulsions during oil production. However, the formation of emulsions presents a costly problem in surface process particularly, both in terms of transportation energy consumption and separation efficiency. To deal with the production and operational problems which are related to crude oil emulsions, especially to ensure the separation and transportation of crude oil-water systems, it is necessary to better understand the emulsification mechanism of crude oil under different conditions from the aspects of bulk and interfacial properties. The concept of shearing energy was introduced in this study to reveal the driving force for emulsification. The relationship between shearing stress in the flow field and interfacial tension (IFT was established, and the correlation between shearing energy and interfacial Gibbs free energy was developed. The potential of the developed correlation model was validated using the experimental and field data on emulsification behavior. It was also shown how droplet deformation could be predicted from a random deformation degree and orientation angle. The results indicated that shearing energy as the energy produced by shearing stress working in the flow field is the driving force activating the emulsification behavior. The deformation degree and orientation angle of dispersed phase droplet are associated with the interfacial properties, rheological properties and the experienced turbulence degree. The correlation between shearing stress and IFT can be quantified if droplet deformation degree vs. droplet orientation angle data is available. When the water cut is close to the inversion point of waxy crude oil emulsion, the interfacial Gibbs free energy change decreased and the shearing energy increased. This feature is also presented in the special regions where

Optimization of Crude Oil and PAHs Degradation by Stenotrophomonas rhizophila KX082814 Strain through Response Surface Methodology Using Box-Behnken Design

Science.gov (United States)

Virupakshappa, Praveen Kumar Siddalingappa; Mishra, Gaurav; Mehkri, Mohammed Ameenuddin

2016-01-01

The present paper describes the process optimization study for crude oil degradation which is a continuation of our earlier work on hydrocarbon degradation study of the isolate Stenotrophomonas rhizophila (PM-1) with GenBank accession number KX082814. Response Surface Methodology with Box-Behnken Design was used to optimize the process wherein temperature, pH, salinity, and inoculum size (at three levels) were used as independent variables and Total Petroleum Hydrocarbon, Biological Oxygen Demand, and Chemical Oxygen Demand of crude oil and PAHs as dependent variables (response). The statistical analysis, via ANOVA, showed coefficient of determination R 2 as 0.7678 with statistically significant P value 0.0163 fitting in second-order quadratic regression model for crude oil removal. The predicted optimum parameters, namely, temperature, pH, salinity, and inoculum size, were found to be 32.5°C, 9, 12.5, and 12.5 mL, respectively. At this optimum condition, the observed and predicted PAHs and crude oil removal were found to be 71.82% and 79.53% in validation experiments, respectively. The % TPH results correlate with GC/MS studies, BOD, COD, and TPC. The validation of numerical optimization was done through GC/MS studies and % removal of crude oil. PMID:28116165

Physico-chemical and microstructural properties of food dispersions

OpenAIRE

Glicerina, Virginia Teresa

2014-01-01

The macroscopic properties of oily food dispersions, such as rheology, mechanical strength, sensory attributes (e.g. mouth feel, texture and even flavour release) and as well as engineering properties are strongly determined by their microstructure, that is considered a key parameter in the understanding of the foods behaviour . In particular the rheological properties of these matrices are largely influenced by their processing techniques, particle size distribution and composition of ingred...

Characterization and Catalytic Upgrading of Crude Bio-oil Produced by Hydrothermal Liquefaction of Swine Manure and Pyrolysis of Biomass

Science.gov (United States)

Cheng, Dan

The distillation curve of crude bio-oil from glycerol-assisted hydrothermal liquefaction of swine manure was measured using an advanced distillation apparatus. The crude bio-oil had much higher distillation temperatures than diesel and gasoline and was more distillable than the bio-oil produced by the traditional liquefaction of swine manure and the pyrolysis of corn stover. Each 10% volumetric fraction was analyzed from aspects of its chemical compositions, chemical and physical properties. The appearance of hydrocarbons in the distillates collected at the temperature of 410.9°C and above indicated that the thermal cracking at a temperature from 410°C to 500°C may be a proper approach to upgrade the crude bio-oil produced from the glycerol-assisted liquefaction of swine manure. The effects of thermal cracking conditions including reaction temperature (350-425°C), retention time (15-60 min) and catalyst loadings (0-10 wt%) on the yield and quality of the upgraded oil were analyzed. Under the optimum thermal cracking conditions at 400°C, a catalyst loading of 5% by mass and the reaction time of 30 min, the yield of bio-oil was 46.14% of the mass of the crude bio-oil and 62.5% of the energy stored in the crude bio-oil was recovered in the upgraded bio-oil. The upgraded bio-oil with a heating value of 41.4 MJ/kg and viscosity of 3.6 cP was comparable to commercial diesel. In upgrading crude bio-oil from fast pyrolysis, converting organic acids into neutral esters is significant and can be achieved by sulfonated activated carbon/bio-char developed from fermentation residues. Acitivated carbon and bio-char were sulfonated by concentrated sulfuric acid at 150°C for 18 h. Sulfonation helped activated carbon/bio-char develop acid functional groups. Sulfonated activated carbon with BET surface area of 349.8 m2/g, was effective in converting acetic acid. Acetic acid can be effectively esterified by sulfonated activated carbon (5 wt%) at 78°C for 60 min with the

The impacts of the export ban on Alaskan crude oil trade

International Nuclear Information System (INIS)

Farah, P.G.; Bausell, C.W.; Vogelsang, A.

1990-01-01

The authors investigated the petroleum markets impacts of lifting the ban on Alaska North Slope (ANS) crude oil exports. This paper reports on some aspects of this investigation. The economic analysis relied heavily on the modeling of the ANS crude trade conducted on behalf of GAO by the Energy Information Administration (EIA) using the Transportation and Refining of International Petroleum model (TRIP). In contrast to previous studies, this one suggests that transportation costs may not be the only major factor in the realignment of ANS crude trade in response to lifting the ban. The differences in the yields of ANS crude and various crudes used by refiners in Pacific Rim countries on the one hand, and the product demand slates of the US West Coast and the potential buyers of ANS crude in Pacific Rim may also figure prominently in determining the reallocation of ANS crude if exports are permitted

Development of a method for environmentally friendly chemical peptide synthesis in water using water-dispersible amino acid nanoparticles

Directory of Open Access Journals (Sweden)

Fukumori Yoshinobu

2011-08-01

Full Text Available Abstract Due to the vast importance of peptides in biological processes, there is an escalating need for synthetic peptides to be used in a wide variety of applications. However, the consumption of organic solvent is extremely large in chemical peptide syntheses because of the multiple condensation steps in organic solvents. That is, the current synthesis method is not environmentally friendly. From the viewpoint of green sustainable chemistry, we focused on developing an organic solvent-free synthetic method using water, an environmentally friendly solvent. Here we described in-water synthesis technology using water-dispersible protected amino acids.

Does China factor matter? An econometric analysis of international crude oil prices

International Nuclear Information System (INIS)

Wu, Gang; Zhang, Yue-Jun

2014-01-01

Whether China’s crude oil imports are the culprit of oil price volatility these years has not been quantitatively confirmed. Therefore, this paper empirically investigates the role of China’s crude oil net imports in Brent price changes from October 2005 to November 2013 based on an econometric analysis. The results indicate that, during the sample period, China’s crude oil imports do not significantly affect Brent price changes, no matter in the long run or short run. Therefore, the blame for China’s crude oil imports to cause the dramatic fluctuations of international oil price has no solid evidence. Also, there exists significant uni-directional causality running from the Brent price to China's crude oil imports at the 5% level. Besides, the response of the Brent price to China's crude oil imports is found positive but slight, and the Brent price responds more significantly to US dollar exchange rate and OECD commercial inventory than to China’s crude oil imports in the short run. Finally, the contribution of China's crude oil imports to Brent price movement is about 10%, which is less than that of US dollar exchange rate but larger than that of Indian crude oil imports or OECD commercial inventory. - Highlights: • The paper detects the role of China’s crude oil imports in Brent oil price changes. • China’s crude imports do not matter for oil prices in the long run or short run. • The blame for China’s crude imports on oil price changes has no solid evidence. • Significant causality runs from Brent prices to China's crude oil net imports. • China's crude imports contribute less to Brent prices than US dollar exchange rate

E3 analysis for crude and vacuum distillation system

Energy Technology Data Exchange (ETDEWEB)

Mittal, V; Zhang, J; Yang, X; Xu, Q [Dan F. Smith Department of Chemical Engineering, Lamar University, Beaumont, Texas (United States)

2011-11-15

Crude oil blending is a very common practice in petroleum refineries, where the main focus is to minimize the total purchase cost of crude oils under specified blending oil properties. Crude oil blending actually has significant impacts on energy consumption from heating furnaces during crude oil processing. Conceivably, furnace energy consumption from burning fuels such as natural gas, fuel oil, or propane causes huge amounts of CO{sub 2} emissions. In this paper, a methodology framework for crude oil blending and processing with simultaneous consideration of energy, emission, and economic profit (E3) is developed. It includes four stages of work: steady-state modeling, heating energy consumption calculation, emission model development, and economic evaluation. With Aspen HYSYS simulation, the developed methodology provides a quantitative support for refinery to identify an optimal E3 operating strategy. A case study is implemented to demonstrate the efficacy of this methodology. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Lyondell plans to hike heavy crude runs at Houston

International Nuclear Information System (INIS)

Land, R.

1992-01-01

Lyondell Petrochemical Co. has outlined a venture that would allow increased runs of heavy crude oil at its 265,000 b/cd Houston refiner. Preliminary plans call for Lyondell, Houston, to ally with subsidiaries of Venezuela's Petroleos de Venezuela SA to upgrade heavy crude processing capabilities of the refiner and obtain supplies of heavy crude feedstock. Lyondell proposes to form a jointly owned company with Pdvsa's Citgo Petroleum Corp. subsidiary to take over ownership of the Houston plant. This paper reports that upgrades would not significantly change the plant's crude capacity but would allow the refiner to process as much as 200,000 b/d of heavy crude feedstock, up from 120,000 b/d at present. Following completion of the upgrade, Citgo could increase its interest to 50% with Lyondell retaining remaining venture interest. Upgrade design and engineering are to begin immediately, with regulatory permitting and construction expected to be complete in 3-4 years

Dispersive effects on multicomponent transport through porous media

Science.gov (United States)

Dutta, Sourav; Daripa, Prabir

2017-11-01

We use a hybrid numerical method to solve a global pressure based porous media flow model of chemical enhanced oil recovery. This is an extension of our recent work. The numerical method is based on the use of a discontinuous finite element method and the modified method of characteristics. The impact of molecular diffusion and mechanical dispersion on the evolution of scalar concentration distributions are studied through numerical simulations of various flooding schemes. The relative importance of the advective, capillary diffusive and dispersive fluxes are compared over different flow regimes defined in the parameter space of Capillary number, Peclet number, longitudinal and transverse dispersion coefficients. Such studies are relevant for the design of effective injection policies and determining optimal combinations of chemical components for improving recovery. This work has been possible due to financial support from the U.S. National Science Foundation Grant DMS-1522782.

15 CFR 754.3 - Petroleum products not including crude oil.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Petroleum products not including crude... SUPPLY CONTROLS § 754.3 Petroleum products not including crude oil. (a) License requirement. As indicated... required to all destinations, including Canada, for the export of petroleum products, excluding crude oil...

Bridging the Gap between Chemical Flooding and Independent Oil Producers

Energy Technology Data Exchange (ETDEWEB)

Stan McCool; Tony Walton; Paul Whillhite; Mark Ballard; Miguel Rondon; Kaixu Song; Zhijun Liu; Shahab Ahmed; Peter Senior

2012-03-31

Ten Kanas oil reservoirs/leases were studied through geological and engineering analysis to assess the potential performance of chemical flooding to recover oil. Reservoirs/leases that have been efficiently waterflooded have the highest performance potential for chemical flooding. Laboratory work to identify efficient chemical systems and to test the oil recovery performance of the systems was the major effort of the project. Efficient chemical systems were identified for crude oils from nine of the reservoirs/leases. Oil recovery performance of the identified chemical systems in Berea sandstone rocks showed 90+ % recoveries of waterflood residual oil for seven crude oils. Oil recoveries increased with the amount of chemical injected. Recoveries were less in Indiana limestone cores. One formulation recovered 80% of the tertiary oil in the limestone rock. Geological studies for nine of the oil reservoirs are presented. Pleasant Prairie, Trembley, Vinland and Stewart Oilfields in Kansas were the most favorable of the studied reservoirs for a pilot chemical flood from geological considerations. Computer simulations of the performance of a laboratory coreflood were used to predict a field application of chemical flooding for the Trembley Oilfield. Estimates of field applications indicated chemical flooding is an economically viable technology for oil recovery.

Dispersed oil decreases the ability of a model fish (Dicentrarchus labrax) to cope with hydrostatic pressure.

Science.gov (United States)

Dussauze, Matthieu; Pichavant-Rafini, Karine; Belhomme, Marc; Buzzacott, Peter; Privat, Killian; Le Floch, Stéphane; Lemaire, Philippe; Theron, Michaël

2017-01-01

Data on the biological impact of oil dispersion in deep-sea environment are scarce. Hence, the aim of this study was to evaluate the potential interest of a pressure challenge as a new experimental approach for the assessment of consequences of chemically dispersed oil, followed by a high hydrostatic pressure challenge. This work was conducted on a model fish: juvenile Dicentrarchus labrax. Seabass were exposed for 48 h to dispersant alone (nominal concentration (NC) = 4 mg L -1 ), mechanically dispersed oil (NC = 80 mg L -1 ), two chemically dispersed types of oil (NC = 50 and 80 mg L -1 with a dispersant/oil ratio of 1/20), or kept in clean seawater. Fish were then exposed for 30 min at a simulated depth of 1350 m, corresponding to pressure of 136 absolute atmospheres (ATA). The probability of fish exhibiting normal activity after the pressure challenge significantly increased from 0.40 to 0.55 when they were exposed to the dispersant but decreased to 0.26 and 0.11 in the case of chemical dispersion of oil (at 50 and 80 mg L -1 , respectively). The chemical dispersion at 80 mg L -1 also induced an increase in probability of death after the pressure challenge (from 0.08 to 0.26). This study clearly demonstrates the ability of a pressure challenge test to give evidence of the effects of a contaminant on the capacity of fish to face hydrostatic pressure. It opens new perspectives on the analysis of the biological impact of chemical dispersion of oil at depth, especially on marine species performing vertical migrations.

Interactions between crude drug extracts used in Japanese traditional Kampo medicines and organic anion-transporting polypeptide 2B1.

Science.gov (United States)

Iijima, Rie; Watanabe, Tomoki; Ishiuchi, Kan'ichiro; Matsumoto, Takashi; Watanabe, Junko; Makino, Toshiaki

2018-03-25

The use of herbal medicines has become popular worldwide, and the information on drug interactions between herbal medicines and chemical drugs is needed. We screened the inhibitory effects of crude drugs used in Kampo medicines used in Japan on organic anion-transporting polypeptide (OATP) 2B1 to predict potential interactions between Kampo medicines and chemical drugs used together. We chose 98 kinds of crude drugs frequently used as ingredients of Kampo formulations in Japan and prepared their boiling water extracts. We then screened their inhibitory effects on OATP2B1 by measuring the uptake of estrone 3-sulphate (E3S) by HEK293 cells stably expressing OATP2B1. At the concentration of 100µg/ml, the extracts prepared from 12 kinds of crude drugs, Scuteralliae Radix, Arecae Semen, Aurantii Fructus Immaturus, Perillae Herba, Panacis Japonici Rhizoma, Moutan Cortex, Polygalae Radix, Rhei Rhizoma, Cannabis Fructus, Chrysanthemi Flos, Eriobotryae Folium, and Querci Cortex, suppressed the function of OATP2B1 by less than 20%. The extract of bofutsushosan, a representative Kampo formulation, inhibited OATP2B1 function with sufficient levels to suppress absorption of OATP2B1 substrates in clinics. We further evaluated the inhibitory effects of several ingredients containing Rhei Rhizoma, Perillae Herba, and Moutan Cortex on OATP2B1. Because of crude drugs used in Kampo medicines might suppress absorption of OATP2B1 substrates, these results may contribute to the safe and effective use of Kampo medicine in clinics. A list of abbreviations: EC, (-)-epicatechin; ECG, epicatechin gallate; EGC, epigallocatechin; EGCG, Epigallocatechin gallate; FBS, fetal bovine serum; grapefruit juice; HEK293, Human embryonic kidney; IC 50, The half inhibitory concentration; OATP, organic anion-transporting polypeptide; β-PGG, penta-O-galloyl-β-D-glucose; t.i.d, 3 times a day. Copyright © 2017 Elsevier B.V. All rights reserved.

Study of the gelation behaviour of Brazilian waxy crude oils

Energy Technology Data Exchange (ETDEWEB)

Ziglio, C.M.; Sant' Ana, D.F. [Petroleo Brasileiro S.A., Petrobras, Rio de Janeiro (Brazil)

2008-07-01

The precipitation of wax from crude oil results in the formation of a paraffin network which evolves into a gel structure, causing a major operating issue for the petroleum industry. A gelled oil in a pipeline may need a very high re-start pressure that is beyond the capacity of the pump. The gelation of the oil can also develop into a wax deposit on the pipeline wall that restricts the flow of crude oil. Rheometry tests were used in this study to determine the yielding process of wax gels formed by the cooling of Brazilian crude oils. The effect of selected chemical additives on the gel strength was also examined. Dynamic rheology was used to study the oil-gel transition under quiescent conditions. Two rheological methods were used to study the gel yield stress, which is related to the gel strength. In the Creep and Recovery method, a stress was applied to the sample for a short period while the resulting deformation was measured. The stress was then removed to allow the sample to recover the gel structure. The steps of creep and recovery were repeated with an increasing stress value. The yield stress was identified as the minimum stress to cause an irreversible deformation in the sample. The yield stress of the gelled oil was estimated through dynamic measurements. Gel breakdown occurred when the sample was submitted to a critical strain, which is related to the yield stress value. This study showed that the gelation temperature can be reduced considerably by adding small amounts of readily available additives. These additives have an influence on yield stress values. In a cold re-start situation, they can reduce the pump pressure.

Accidental pollution in the ocean: besides crude oil, chemicals and other spills

International Nuclear Information System (INIS)

Marchand, M.

2003-01-01

Accidental pollution of the seas is usually illustrated by the shipwreck of tankers carrying crude oil. We must look beyond this image since such accidents spill substances other than petrochemicals. We need but mention the Levoli Sun's accident near the Cotentin peninsula, France, one year after the Erika went down. And what about spills of agricultural and food products? An accidental spill as apparently harmless as wheat might have serious effects on not just the environment but also human health. In all cases, two major series of questions crop up: 1) Is it necessary to intervene? If so, are we able to? And if we can, how to fight against spills? 2) What are the short- and long-term effects on the environment and on all human activities related to the sea (fishing, fish-farming, salt production, tourism, salt-water cures, etc.)? These two questions have a common denominator: the need to know how spilled products react. This knowledge conditions both the operational response for fighting against pollution and the assessment of the impact on the maritime environment. (author)

Summary of breakout Session C1: C1, chemical countermeasures; dispersants

International Nuclear Information System (INIS)

Anon.

1992-01-01

The discussions in breakout session C1 are summarized. The topics discussed include the pros and cons of dispersant use. Many of the positions which have been heard for the last twenty years were restated. Neither group convinced the other of the advisability of easing the use of dispersants. There was better agreement on the need for research and development programs to get a better handle on some of the questions being raised. The R ampersand D needs on which the participants could agree are summarized

Efficiency of crude oil markets: Evidences from informational entropy analysis

International Nuclear Information System (INIS)

Ortiz-Cruz, Alejandro; Rodriguez, Eduardo; Ibarra-Valdez, Carlos; Alvarez-Ramirez, Jose

2012-01-01

The role of crude oil as the main energy source for the global economic activity has motivated the discussion about the dynamics and causes of crude oil price changes. An accurate understanding of the issue should provide important guidelines for the design of optimal policies and government budget planning. Using daily data for WTI over the period January 1986–March 2011, we analyze the evolution of the informational complexity and efficiency for the crude oil market through multiscale entropy analysis. The results indicated that the crude oil market is informationally efficient over the scrutinized period except for two periods that correspond to the early 1990s and late 2000s US recessions. Overall, the results showed that deregulation has improved the operation of the market in the sense of making returns less predictable. On the other hand, there is some evidence that the probability of having a severe US economic recession increases as the informational efficiency decreases, which indicates that returns from crude oil markets are less uncertain during economic downturns. - Highlights: ► Entropy concepts are used to characterize crude oil prices. ► An index of market efficiency is introduced. ► Except for periods of economic recession, the crude oil market is informationally efficient.

A study of the effects of enhanced oil recovery agents on the quality of Strategic Petroleum Reserves crude oil. Final technical report

Energy Technology Data Exchange (ETDEWEB)

Kabadi, V.N.

1992-10-01

The project was initiated on September 1, 1990. The objective of the project was to carry out a literature search to estimate the types and extents of long time interactions of enhanced oil recovery (EOR) agents, such as surfactants, caustics and polymers, with crude oil. This information is necessary to make recommendations about mixing EOR crude oil with crude oils from primary and secondary recovery processes in the Strategic Petroleum Reserve (SPR). Data were sought on both adverse and beneficial effects of EOR agents that would impact handling, transportation and refining of crude oil. An extensive literature search has been completed, and the following informations has been compiled: (1) a listing of existing EOR test and field projects; (2) a listing of currently used EOR agents; and (3) evidence of short and long term physical and chemical interactions of these EOR-agents with hydrocarbons, and their effects on the quality of crude oil at long times. This information is presented in this report. Finally some conclusions are derived and recommendations are made. Although the conclusions are based mostly on extrapolations because of lack of specific data, it is recommended that the enhancement of the rates of biodegradation of oil catalyzed by the EOR agents needs to be further studied. There is no evidence of substantial long term effects on crude oil because of other interactions. Some recommendations are also made regarding the types of studies that would be necessary to determine the effect of certain EOR agents on the rates of biodegradation of crude oil.

Conversion of yellow crude sugar into alcohol. Conversion of yellow crude sugar in a mixture with sugar beet molasses

Energy Technology Data Exchange (ETDEWEB)

Krishtul, F B; Malchenko, A L; Poluyanova, M T; Gromovich, V F; Maskimova, E A; Golodovskaya, A I; Pal' gova, L S

1963-01-01

Crude sugar (96.5 to 98.4% sucrose) in a mixture with molasses can be converted into alcohol by either batchwise or continuous fermentation processes with good process characteristics. Best yields are obtained when the amount of crude sugar is not more than 50% of the total weight of fermenting material. The bakers' yeast and alcohol produced are of good quality.

Optimization of wind speed on dispersion of pollutants using ...

Indian Academy of Sciences (India)

Department of Chemical Engineering, National Institute of Technology Calicut, ... The classical approaches of dispersion model (Qian & Venkatram 2001; ..... of ambient fine organic carbon particles and source apportionment of PM2.5 in Indian ... matrix factorization and chemical mass balance applied to receptor modeling.

The impact of energy derivatives on the crude oil market

Energy Technology Data Exchange (ETDEWEB)

Fleming, J.; Ostdiek, B. [Jones Graduate School of Management, Rice University, MS 531, P.O. Box 1892 Houston, TX (United States)

1999-04-01

We examine the effects of energy derivatives trading on the crude oil market. There is a common public and regulatory perception that derivative securities increase volatility and can have a destabilizing effect on the underlying market. Consistent with this view, we find an abnormal increase in volatility for three consecutive weeks following the introduction of NYMEX crude oil futures. While there is also evidence of a longer-term volatility increase, this is likely due to exogenous factors, such as the continuing deregulation of the energy markets. Subsequent introductions of crude oil options and derivatives on other energy commodities have no effect on crude oil volatility. We also examine the effects of derivatives trading on the depth and liquidity of the crude oil market. This analysis reveals a strong inverse relation between the open interest in crude oil futures and spot market volatility. Specifically, when open interest is greater, the volatility shock associated with a given unexpected increase in volume is much smaller. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

The impact of energy derivatives on the crude oil market

International Nuclear Information System (INIS)

Fleming, J.; Ostdiek, B.

1999-01-01

We examine the effects of energy derivatives trading on the crude oil market. There is a common public and regulatory perception that derivative securities increase volatility and can have a destabilizing effect on the underlying market. Consistent with this view, we find an abnormal increase in volatility for three consecutive weeks following the introduction of NYMEX crude oil futures. While there is also evidence of a longer-term volatility increase, this is likely due to exogenous factors, such as the continuing deregulation of the energy markets. Subsequent introductions of crude oil options and derivatives on other energy commodities have no effect on crude oil volatility. We also examine the effects of derivatives trading on the depth and liquidity of the crude oil market. This analysis reveals a strong inverse relation between the open interest in crude oil futures and spot market volatility. Specifically, when open interest is greater, the volatility shock associated with a given unexpected increase in volume is much smaller. (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

The relationship between SARA fractions and crude oil stability

Directory of Open Access Journals (Sweden)

Siavash Ashoori

2017-03-01

Full Text Available Asphaltene precipitation and deposition are drastic issues in the petroleum industry. Monitoring the asphaltene stability in crude oil is still a serious problem and has been subject of many studies. To investigate crude oil stability by saturate, aromatic, resin and asphaltene (SARA analysis seven types of crudes with different components were used. The applied methods for SARA quantification are IP-143 and ASTM D893-69 and the colloidal instability index (CII is computed from the SARA values as well. In comparison between CII results, the values of oil compositions demonstrated that the stability of asphaltenes in crude oils is a phenomenon that is related to all these components and it cannot be associated only with one of them, individually.

Pricing and crude oil self-sufficiency. [Canada

Energy Technology Data Exchange (ETDEWEB)

1979-11-01

How Canada should go about achieving crude oil self-sufficiency and who should develop Canada's petroleum resources are discussed. The degree of urgency and the level of commitment required by government, industry, and consumers are evaluated. What the price should be of Canadian crude oil and who should establish this price are also discussed. The economic aspects of investment, return, and taxation are also included. (DC)

THE CHEMICAL COMPOSITION ASSESSMENT OF THE FETEASCĂ NEAGRĂ GRAPE POMACE AND ITS FRACTIONS OBTAINED FROM WINE INDUSTRY IN DIFFERENT YEARS

Directory of Open Access Journals (Sweden)

Pascariu Mariana Silvia

2015-12-01

Full Text Available The aim of the hereby study was to analyze and to compare the chemical content of the grape pomace and its fractions: skins and seeds from the red grape variety Fetească neagră (from Iași area, obtained in different years 2013 and 2014 respectively, from the winemaking process. Measurements targeted the dry matter content (DM%, organic matter (OM%, crude ash (CA%, crude protein (CP%, crude fat (EE%, crude fiber (CF%, neazotate extractive substances (SEN%, total polyphenols (TP% and tannins (Ta%. The results obtained showed significant differences in the chemical composition in favour of the grape pomace obtained in the 2014 climatic conditions: in the case of the seed for the content of DM%, SEN%, TP% and Ta%, in the case of the skins for the content of DM%, OM%, CF%, TP%, Ta% and in the case of the grape pomace for the content of DM%, OM%, CF%, SEN%, TP%, and Ta%. Comparative analysis of the chemical composition showed an annual variation of the chemical components, which may be due to climatic conditions and winemaking process. Therefore, an annual chemical quality assessment of the grape pomace is necessary, for the efficient use in the animal feed.

mc1r Pathway regulation of zebrafish melanosome dispersion

DEFF Research Database (Denmark)

Richardson, Jennifer; Lundegaard, Pia Rengtved; Reynolds, Natalie L

2008-01-01

Zebrafish rapidly alter their pigmentation in response to environmental changes. For black melanocytes, this change is due to aggregation or dispersion of melanin in the cell. Dispersion and aggregation are controlled by intracellular cyclic adenosine monophosphate (cAMP) levels, which increase...... in mammals, and melanosome dispersal in cold-blood vertebrates, the pathway components are highly conserved. However, it has only been assumed that mc1r mediates melanosome dispersal in fish. Here, using morpholino oligonucleotides designed to knockdown mc1r expression, we find that mc1r morphants are unable...... to disperse melanosomes when grown in dark conditions. We also use chemical modifiers of the cAMP pathway, and find an unexpected response to the specific phosphodiesterase 4 (PDE4) inhibitor, rolipram, in melanosome dispersal. When treated with the drug, melanosomes fail to fully disperse in dark conditions...

Bioremediation potential of crude oil spilled on soil

International Nuclear Information System (INIS)

McMillen, S.J.; Young, G.N.; Davis, P.S.; Cook, P.D.; Kerr, J.M.; Gray, N.R.; Requejo, A.G.

1995-01-01

Spills sometimes occur during routine operations associated with exploration and production (E and P) of crude oil. These spills at E and P sites typically are small, less than 1 acre (0.4 ha), and the spill may be in remote locations. As a result, bioremediation often represents a cost-effective alternative to other cleanup technologies. The goal of this study was to determine the potential for biodegrading a range of crude oil types and determining the effect of process variables such as soil texture and soil salinity. Crude oils evaluated ranged in American Petroleum institute (API) gravity from 14 degree to 45 degree. The extent of biodegradation was calculated from oxygen uptake data and the total extractable material (TEM) concentration. Based on the data collected, a simple model was developed for predicting the bioremediation potential of a range of crude oil types. Biodegradation rates were significantly lower in sandy soils. Soil salinities greater than approximately 40 mmhos/cm adversely impacted soil microbial activity and biodegradation rate

The crude petroleum and natural gas industry : 1996

International Nuclear Information System (INIS)

1997-01-01

Statistics regarding Canada's crude oil and natural gas industry for 1996 were presented. Data presentation was in tabular form, the topics being exploration and development, synthetic crude oil reserves, crude oil production and movements by source, natural gas production, drilling completions, net cash expenditures of the petroleum industry, and total sales of natural gas by province. Some of the noteworthy highlights for 1996 were: (1) 14,600 new wells were drilled, the highest number ever recorded, (2) capital investment was over $13 billion, (3) 148 companies were involved in mergers and acquisitions, (4) value of marketable production of oil, natural gas and natural gas by-products topped $30 billion, (5) Empress pipelines began operations of the first new major oil pipeline from Western Canada in 45 years, (6) the Hibernia offshore crude oil facility was completed, (7) Sable Island offshore energy projects applications were filed, and (8) the development of the Terra Nova, Whitehorse and Hebron fields was announced. 8 tabs

Influence of the crude oil type to platforming effects

International Nuclear Information System (INIS)

Kafedzhiski, Branko; Crvenkova, Suzana; Zikovski, Toni

1999-01-01

Platforming is one of the most subtleties processing in refinery industry and it is permanent source for research and finding out the higher optimum degree. Optimum of the last effects of platforming directly depends on many parameters. One of the more important parameters is the type of the crude. The purpose of this work is presenting positive and negative effect to the platforming parameters caused by different types of crude in OCTA Crude Oil Refinery - Skopje (Macedonia). (Author)

Biodiesel biorefinery: opportunities and challenges for microbial production of fuels and chemicals from glycerol waste

Directory of Open Access Journals (Sweden)

Almeida João R M

2012-07-01

Full Text Available Abstract The considerable increase in biodiesel production worldwide in the last 5 years resulted in a stoichiometric increased coproduction of crude glycerol. As an excess of crude glycerol has been produced, its value on market was reduced and it is becoming a “waste-stream” instead of a valuable “coproduct”. The development of biorefineries, i.e. production of chemicals and power integrated with conversion processes of biomass into biofuels, has been singled out as a way to achieve economically viable production chains, valorize residues and coproducts, and reduce industrial waste disposal. In this sense, several alternatives aimed at the use of crude glycerol to produce fuels and chemicals by microbial fermentation have been evaluated. This review summarizes different strategies employed to produce biofuels and chemicals (1,3-propanediol, 2,3-butanediol, ethanol, n-butanol, organic acids, polyols and others by microbial fermentation of glycerol. Initially, the industrial use of each chemical is briefly presented; then we systematically summarize and discuss the different strategies to produce each chemical, including selection and genetic engineering of producers, and optimization of process conditions to improve yield and productivity. Finally, the impact of the developments obtained until now are placed in perspective and opportunities and challenges for using crude glycerol to the development of biodiesel-based biorefineries are considered. In conclusion, the microbial fermentation of glycerol represents a remarkable alternative to add value to the biodiesel production chain helping the development of biorefineries, which will allow this biofuel to be more competitive.

Biogeochemistry of anaerobic crude oil biodegradation

Science.gov (United States)

Head, Ian; Gray, Neil; Aitken, Caroline; Sherry, Angela; Jones, Martin; Larter, Stephen

2010-05-01

Anaerobic degradation of crude oil and petroleum hydrocarbons is widely recognized as a globally significant process both in the formation of the world's vast heavy oil deposits and for the dissipation of hydrocarbon pollution in anoxic contaminated environments. Comparative analysis of crude oil biodegradation under methanogenic and sulfate-reducing conditions has revealed differences not only in the patterns of compound class removal but also in the microbial communities responsible. Under methanogenic conditions syntrophic associations dominated by bacteria from the Syntropheaceae are prevalent and these are likely key players in the initial anaerobic degradation of crude oil alkanes to intermediates such as hydrogen and acetate. Syntrophic acetate oxidation plays an important role in these systems and often results in methanogenesis dominated by CO2 reduction by members of the Methanomicrobiales. By contrast the bacterial communities from sulfate-reducing crude oil-degrading systems were more diverse and no single taxon dominated the oil-degrading sulfate-reducing systems. All five proteobacterial subdivisions were represented with Delta- and Gammaproteobacteria being detected most consistently. In sediments which were pasteurized hydrocarbon degradation continued at a relatively low rate. Nevertheless, alkylsuccinates characteristic of anaerobic hydrocarbon degradation accumulated to high concentrations. This suggested that the sediments harbour heat resistant, possibly spore-forming alkane degrading sulfate-reducers. This is particularly interesting since it has been proposed recently, that spore-forming sulfate-reducing bacteria found in cold arctic sediments may have originated from seepage of geofluids from deep subsurface hydrocarbon reservoirs.

77 FR 55817 - Delek Crude Logistics, LLC; Notice of Petition for Waiver

Science.gov (United States)

2012-09-11

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. OR12-19-000] Delek Crude Logistics, LLC; Notice of Petition for Waiver Take notice that on June 11, 2012, Delek Crude Logistics, LLC... East Texas Crude Logistics crude oil pipeline system. Any person desiring to intervene or to protest in...

Atmospheric dispersion models help to improve air quality; Los modelos de dispersion atmosferica ayudan a mejorar la calidad del aire

Energy Technology Data Exchange (ETDEWEB)

Martin, F.

2013-07-01

One of the main challenges of the atmospheric sciences is to reproduce as well as possible the phenomena and processes of pollutants in the atmosphere. To do it, mathematical models based in this case on fluid dynamics and mass and energy conservation equations, equations that govern the atmospheric chemistry, etc., adapted to the spatial scales to be simulated, are developed. The dispersion models simulate the processes of transport, dispersion, chemical transformation and elimination by deposition that air pollutants undergo once they are emitted. Atmospheric dispersion models with their multiple applications have become essential tools for the air quality management. (Author)

Characterization of CRUDE OILS and petroleum products: (i) elution ...

African Journals Online (AJOL)

Characterization of CRUDE OILS and petroleum products: (i) elution liquid chromatographic separation and gas chromatographic analysis of crude oils and petroleum products. E.O. Odebunmi, E.A. Ogunsakin, P.E.P. Ilukhor ...

The influence of magnetic fields on crude oils viscosity

Energy Technology Data Exchange (ETDEWEB)

Goncalves, Jose L.; Bombard, Antonio J. F. [Universidade Federal de Itajuba (UNIFEI), Itajuba, MG (Brazil). Instituto de Ciencias Exatas. Lab. de Reologia

2009-07-01

The crystallization of paraffin causes serious problems in the process of transportation of petroleum. This phenomenon increases the crude oil viscosity and implies an organic resin accumulation on pipeline wall, resulting in a reduced flux area or totally blocked pipes. One of the most challenging tasks for pipeline maintenance is solving this problem at low cost. Therefore, a method that inhibits the crystallization of paraffin and reduces the viscosity of crude oil could have many useful applications within the petroleum industry. Recent studies showed that magnetic fields reduce the Wax Appearance Temperature (WAT) and the viscosity of paraffin-based crude oil. For better understanding of this discovery, a series of tests was performed. This paper will show the influence of a DC magnetic field on rheological proprieties of three crude oils with different paraffin concentrations: a crude oil sample with 11 % p/p of paraffin concentration (sample 1); a crude oil sample with 6 % p/p of paraffin concentration (sample 2); a mixture of paraffin plus light crude oil with a total of 11 % p/p of paraffin concentration. These samples were placed in an electromagnet that generates a magnetic field of 1.3 Tesla. The samples' temperatures were conditioned around their Wax Appearance Temperature (WAT), and they were exposed to the field. As the viscosity of crude oil is very sensitive to the changes in temperature, it was ensured that the temperature has remained constant throughout the process. The sample 1 revealed a considerable reduction of viscosity: its original viscosity was 66 cP before magnetic field exposure, after that its viscosity was reduced to 39 cP. The other samples showed the same viscosity, before and after the magnetic field exposure. Since the samples 1 and 3 have the same paraffin concentrations, the viscosity reduction is not due only to the presence of paraffin; there must be other factors responsible for the interaction of sample 1 with the

Induction of reactive oxygen species in marine phytoplankton under crude oil exposure.

Science.gov (United States)

Ozhan, Koray; Zahraeifard, Sara; Smith, Aaron P; Bargu, Sibel

2015-12-01

Exposure of phytoplankton to the water-accommodated fraction of crude oil can elicit a number of stress responses, but the mechanisms that drive these responses are unclear. South Louisiana crude oil was selected to investigate its effects on population growth, chlorophyll a (Chl a) content, antioxidative defense, and lipid peroxidation, for the marine diatom, Ditylum brightwellii, and the dinoflagellate, Heterocapsa triquetra, in laboratory-based microcosm experiments. The transcript levels of several possible stress-responsive genes in D. brightwellii were also measured. The microalgae were exposed to crude oil for up to 96 h, and Chl a content, superoxide dismutase (SOD), the glutathione pool (GSH and GSSG), and lipid peroxidation content were analyzed. The cell growth of both phytoplankton species was inhibited with increasing crude oil concentrations. Crude oil exposure did not affect Chl a content significantly in cells. SOD activities showed similar responses in both species, being enhanced at 4- and 8-mg/L crude oil exposure. Only H. triquetra demonstrated enhanced activity in GSSG pool and lipid peroxidation at 8-mg/L crude oil exposure, suggesting that phytoplankton species have distinct physiological responses and tolerance levels to crude oil exposure. This study indicated the activation of reactive oxygen species (ROS) in phytoplankton under crude oil exposure; however, the progressive damage in cells is still unknown. Thus, ROS-related damage in nucleic acid, lipids, proteins, and DNA, due to crude oil exposure could be a worthwhile subject of study to better understand crude oil toxicity at the base of the food web.

Effect on molecular interactions of chemical alteration of petroleum asphaltenes. I

DEFF Research Database (Denmark)

Juyal, Priyanka; Garcia, Daniel Merino; Andersen, Simon Ivar

2005-01-01

Asphaltenes are naturally occurring components of crude oil and have been the subject of many studies that have involved a variety of methods to determine their complex structure, their association in crude oil with resins, and their agglomeration phenomena. Yet, the molecular structures of aspha......Asphaltenes are naturally occurring components of crude oil and have been the subject of many studies that have involved a variety of methods to determine their complex structure, their association in crude oil with resins, and their agglomeration phenomena. Yet, the molecular structures...... of asphaltenes have not been fully elucidated. It is especially important to characterize the polar functionalities of these fractions, because they participate in the intermolecular aggregation by means of hydrogen bonds. The chemical derivatization of asphaltenes has been used, in combination with suitable...

Electrical desalting - preparing of the crude oil for further processing

International Nuclear Information System (INIS)

Asadi, Nadija; Minovski, Mino; Sokolovski, Aleksandar

1999-01-01

Desalting as well as dewatering of the crude oil is important preparing process, which takes place in crude units on the refinery plants. One of the most efficient ways of desalting is use of high voltage electricity. In this work attention is paid on the principals of this process, illustrated with practically gained results from the OKTA Crude Oil Refinery in Macedonia. (Original)

Value chain management for commodities: a case study from the chemical industry

NARCIS (Netherlands)

Kannegiesser, M.; Günther, H.O.; Beek, van P.; Grunow, M.; Habla, C.

2009-01-01

We present a planning model for chemical commodities related to an industry case. Commodities are standard chemicals characterized by sales and supply volatility in volume and value. Increasing and volatile prices of crude oil-dependent raw materials require coordination of sales and supply

Effect of temperature on biodegradation of crude oil

International Nuclear Information System (INIS)

Zekri, A.; Chaalal, O.

2005-01-01

An active strain of anaerobic thermophilic bacteria was isolated from the environment of the United Arab Emirates. This project studied the effect of temperature, salinity and oil concentration on biodegradation of crude oil. Oil weight loss, microbial growth and the changes of the crude oil asphaltene concentration are used to evaluate the oil degradation by this strain. A series of batch experiments was performed to study the effects of bacteria on the degradation of crude oil. The effects of oil concentration, bacteria concentration, temperature and salinity on the biodegradation were investigated. The temperatures of the studied systems were varied between 35 and 75 o C and the salt concentrations were varied between 0 and 10%. Oil concentrations were ranged from 5 to 50% by volume. Experimental work showed the bacteria employed in this project were capable of surviving the harsh environment and degrading the crude oil at various conditions. Increasing the temperature increases the rate of oil degradation by bacteria. Increasing the oil concentration in general decreases the rate of bacteria oil degradation. Salinity plays a major role on the acceleration of biodegradation process of crude oil. An optimum salinity should be determined for every studied system. The finding of this project could be used in either the treatment of oil spill or in-situ stimulation of heavy oil wells. (author)

Fate of dispersed marine fuel oil in sediment under pre-spill application strategy

International Nuclear Information System (INIS)

Jian Hua

2004-01-01

A comparison of the movement of dispersed oil in marine sediment under two dispersant application scenarios, applied prior to and after oil being spilled overboard, was examined. The pre-spill application scenario caused much less oil to be retained in the top sediment than post-spill scenario. The difference in oil retention in the top sediment between pre- and post-spill application scenario increased with increase in fuel oil temperature. For fuel oil above 40 o C, the difference in the effect of pre-spill application strategy under various water temperatures was negligible. When soap water was used as replacement for chemical dispersant, almost one-half as much oil was retained in the top sediment as that when using chemical dispersant. The adsorption of dispersed oil to the top sediment was almost proportionally decreased with doubling of soap dosage. (Author)

Biotransformation of petroleum hydrocarbons and microbial communities in seawater with oil dispersions and copepod feces.

Science.gov (United States)

Størdal, Ingvild Fladvad; Olsen, Anders Johny; Jenssen, Bjørn Munro; Netzer, Roman; Altin, Dag; Brakstad, Odd Gunnar

2015-12-30

To determine biotransformation of components in crude oil dispersions in the presence of feces from marine copepods, dispersed oil was incubated alone, with the addition of clean or oil-containing feces. We hypothesized that the feces would contribute with nutrients to bacteria, and higher concentrations of oil-degrading bacteria, respectively. Presence of clean feces resulted in higher degradation of aromatic oil compounds, but lower degradation of n-alkanes. Presence of oil-containing feces resulted in higher degradation of n-alkanes. The effect of clean feces on aromatic compounds are suggested to be due to higher concentrations of nutrients in the seawater where aromatic degradation takes place, while the lower degradation of n-alkanes are suggested to be due to a preference by bacteria for feces over these compounds. Large aggregates were observed in oil dispersions with clean feces, which may cause sedimentation of un-weathered lipophilic oil compounds towards the seafloor if formed during oil spills. Copyright © 2015 Elsevier Ltd. All rights reserved.

Maximising profitability through the use of simulation for new market crudes evaluation

Energy Technology Data Exchange (ETDEWEB)

Mendez, Maryro P. [KBC Advanced Technologies, Surrey (United Kingdom)

2012-07-01

There is nothing that contributes more to the cost of production for a refinery than the cost of crude oil and other feedstocks. The efficient and effective evaluation and selection of crude oil to a refinery will have a very significant impact on its profitability. The crude oil selected will impact the utilization and output from different process units, has the potential to impact maintenance and energy costs, and will impact product properties from the refinery. The tools and knowledge necessary for a good new crude evaluation program are addressed as part of this paper. The work process is outlined in detail. Finally, we address some of the risk management issues inherent in processing high margin crudes. Innovative simulation tools like Petro-SIM offer the platform to evaluate opportunities to capture the value that the sour/sweet crude differential and that the new crudes coming in to the market have to offer for a given refinery configuration. The paper provides comments on how KBC's methodology has helped refiners to check their ability to run new challenging crudes. (author)

The case for using vessel-based systems to apply oil-spill dispersants

International Nuclear Information System (INIS)

Ross, S.

1998-01-01

Most emergency plans for dealing with marine oil spills include the use of chemical dispersants. This paper presents a comparison between the capabilities of aircraft-based dispersant application systems and vessel-based systems. The comparison was presented in terms of the logistics of treating offshore spills. Vessel-based systems have certain advantages in terms of their availability and cost. They have better spray control and accuracy and can dose thick slicks in one pass. However, this advantage is lost if the dispersant payload on the vessel is relatively small and the spill is located very far from the base of operations. Under certain conditions, vessel-based dispersant application systems can treat spills as quickly as aircraft-based systems. Most marine spills tend to occur in restricted waters near ports where dispersant stockpiles could be stored for ready use by vessels in the area. Development of a modern vessel-based, fire-monitor system for applying chemical dispersant onto marine oil spills was one of the recommendations emerging from the study. 32 refs., 6 tabs., 1 fig

The Cytotoxic, Antibacterial and Free Radical Scavenging Activities of Crude Extracts of Matricaria chamomilla, Salvadora persica and Artemisia annua

KAUST Repository

Seddek, Ahmed

2011-12-01

The discovery of drugs from natural sources has been a rapidly growing science in this era. Plants used for medicinal purposes have been usually studied as rich sources of bioactive chemical compounds that can be used as medications. Several plant-derived drugs have been approved so far. Cancer and infectious diseases have been common targets for the science of drug discovery, due to the high mortality rates caused by these diseases all over the world. Several plant-derived compounds are being marketed now as anti-cancer agents. However, finding novel antimicrobial and anti-cancer compounds has become an important goal to overcome the problems of existing anti-cancer and antimicrobial agents, such as resistance and non-selectivity. In this thesis project, an attempt to find out useful biological activities of the crude extracts of some plants used traditionally for medicinal purposes in Saudi Arabia has been made. Matricaria chamomilla, Salvadora persica and Artemisia annua have been selected for study, based on the literature review performed. These plants were screened for three biological activities; anti-cancer, anti-bacterial and free radical scavenging activities. The experimental part of the study consisted of some common in-vitro techniques, such as cytotoxicity and cell viability assays, disk diffusion assay and 1,1-diphenyl-2-picryl-hydrazyl assay. In addition, the crude extract of Matricaria chamomilla has undergone chemical fractionation and four solvent fractions were obtained using column chromatography. The crude extract of Matricaria chamomilla showed a promising anti-bacterial activity against Escherichia coli and a very promising free radical scavenging activity that was comparable to ascorbic acid, an important anti-oxidant. The four solvent fractions obtained from that extract showed that these activities were produced by more than one compound belonging to different solvent fractions. In addition, the crude extract of Artemisia annua showed

Modifying Silicates for Better Dispersion in Nanocomposites

Science.gov (United States)

Campbell, Sandi

2005-01-01

An improved chemical modification has been developed to enhance the dispersion of layered silicate particles in the formulation of a polymer/silicate nanocomposite material. The modification involves, among other things, the co-exchange of an alkyl ammonium ion and a monoprotonated diamine with interlayer cations of the silicate. The net overall effects of the improved chemical modification are to improve processability of the nanocomposite and maximize the benefits of dispersing the silicate particles into the polymer. Some background discussion is necessary to give meaning to a description of this development. Polymer/silicate nanocomposites are also denoted polymer/clay composites because the silicate particles in them are typically derived from clay particles. Particles of clay comprise layers of silicate platelets separated by gaps called "galleries." The platelet thickness is 1 nm. The length varies from 30 nm to 1 m, depending on the silicate. In order to fully realize the benefits of polymer/silicate nanocomposites, it is necessary to ensure that the platelets become dispersed in the polymer matrices. Proper dispersion can impart physical and chemical properties that make nanocomposites attractive for a variety of applications. In order to achieve nanometer-level dispersion of a layered silicate into a polymer matrix, it is typically necessary to modify the interlayer silicate surfaces by attaching organic functional groups. This modification can be achieved easily by ion exchange between the interlayer metal cations found naturally in the silicate and protonated organic cations - typically protonated amines. Long-chain alkyl ammonium ions are commonly chosen as the ion-exchange materials because they effectively lower the surface energies of the silicates and ease the incorporation of organic monomers or polymers into the silicate galleries. This completes the background discussion. In the present improved modification of the interlayer silicate surfaces

Technical Proposal for Loading 3000 Gallon Crude Oil Samples from Field Terminal to Sandia Pressurized Tanker to Support US DOE/DOT Crude Oil Characterization Research Study

Energy Technology Data Exchange (ETDEWEB)

Lord, David; Allen, Raymond

2016-10-01

Sandia National Laboratories is seeking access to crude oil samples for a research project evaluating crude oil combustion properties in large-scale tests at Sandia National Laboratories in Albuquerque, NM. Samples must be collected from a source location and transported to Albuquerque in a tanker that complies with all applicable regulations for transportation of crude oil over public roadways. Moreover, the samples must not gain or lose any components, to include dissolved gases, from the point of loading through the time of combustion at the Sandia testing facility. In order to achieve this, Sandia designed and is currently procuring a custom tanker that utilizes water displacement in order to achieve these performance requirements. The water displacement procedure is modeled after the GPA 2174 standard “Obtaining Liquid Hydrocarbons Samples for Analysis by Gas Chromatography” (GPA 2014) that is used routinely by crude oil analytical laboratories for capturing and testing condensates and “live” crude oils, though it is practiced at the liter scale in most applications. The Sandia testing requires 3,000 gallons of crude. As such, the water displacement method will be upscaled and implemented in a custom tanker. This report describes the loading process for acquiring a ~3,000 gallon crude oil sample from commercial process piping containing single phase liquid crude oil at nominally 50-100 psig. This document contains a general description of the process (Section 2), detailed loading procedure (Section 3) and associated oil testing protocols (Section 4).

California demand and supply of crude oil: An econometric analysis with projections to 2000

International Nuclear Information System (INIS)

Ibegbulam, B.N.

1991-01-01

Forecast of California domestic crude oil supply requires the forecasts of California crude oil production and supply from Alaska. Future California crude oil production is forecast with an econometric model that postulates production as a function of reserves and reserves as a function of crude oil prices and exploration and development costs. Future supplies from Alaska are obtained by subtracting forecasts of Alaskan crude oil demand and shipments to the States of Hawaii, Oregon, and Washington from Alaskan North Slope crude oil production forecasts. A two-stage process was used to forecast future California crude oil demand. In the first stage, the demand for refined crude oil products was predicted with a single-equation double logarithmic rational-expectations dynamic model. In the second stage, the total demands obtained in the first stage were converted into a crude oil equivalent. It was found that the current surplus of domestic crude oil in California will end in 1994. Thereafter, California crude oil imports will sharply increase

Gambaran Gejala Pernafasan Pada Pekerja Bagian Quality Control Pabrik Pengolahan Crude Palm Oil (Cpo) Pt.smart,tbk Di Belawan Tahun 2013

OpenAIRE

Wita, Rizka; Tarigan, Lina; Lubis, Halinda Sari

2013-01-01

Respiratory symptom description of Quality Control workers in crude palm oil processing plant PT. Smart Tbk Belawan on 2013. Occupational disease can decrease the health and welfare degree of workers, one of causes factor is chemical. The quality control workers always use chemical which corrosive and irritant to the respiratory system. The method of this research is descriptive survey research. Population is all of quality control workers totaling 36 person. Sample used is the total populati...

Dispersant effectiveness in the field on fresh oils and emulsions

International Nuclear Information System (INIS)

Lunel, T.; Davies, L.

1996-01-01

A detailed data set on the effectiveness of dispersants on fresh oils and emulsions, was presented. The data set could be used to calibrate laboratory dispersant tests and dispersion models so that oil spill response teams would have accurate information to make decisions regarding remediation processes. AEA Technology developed steady state continuous release experiments to provide a data set with quantitative measures of dispersant effectiveness in the field. The Sea Empress incident was closely monitored in order to compare the quantification obtained through field trials. It was noted that the prediction of the percentage of oil dispersed chemically is not the only indication of whether or not to use a dispersant. The important determinant to consider should be the extent to which the natural dispersion process would be enhanced by dispersant application. 17 refs., 5 tabs., 18 figs

Microbial degradation of resins fractionated from Arabian light crude oil

International Nuclear Information System (INIS)

Venkateswaran, K.; Hoaki, T.; Kato, M.; Maruyama, T.

1995-01-01

Sediment samples from the Japanese coasts were screened for microorganisms able to degrade resin components of crude oil. A mixed population that could degrade 35% of 5000 ppm resin in 15 days was obtained. This population also metabolized 50% of saturates and aromatics present in crude oil (5000 ppm) in 7 days. A Pseudomonas sp., isolated from the mixed population, emulsified and degraded 30% of resins. It also degraded saturates and aromatics (30%) present in crude oil (5000 ppm). These results were obtained from Iatroscan analysis. Degradation of crude oil was also analyzed by gas chromatography (GC). The peaks corresponding to known aliphatic hydrocarbons in crude oil greatly decreased within the first two days of incubation in the cultures of the RY-mixed population and of Pseudomonas strain UN3. Aromatic compounds detected as a broad peak by GC were significantly degraded at day 7 by Pseudomonas strain UN3, and at day 15 by the RY-mixed population. Investigations are ongoing to determine the genetic basis for the ability of these organisms to grow on the resin fractions of crude oil as a sole source of carbon and energy. 28 refs., 4 figs., 1 tab

Effect of crude oil and palm bunch ash on maize growth

Institute of Scientific and Technical Information of China (English)

Emmanue Ogboma Dania; Temitayo Fayehun; Osemhengbe Ruth Akhabue

2016-01-01

Objective:To investigate the effect of different crude oil fractions (whole crude and water soluble fraction) at 2% contamination (98% distilled water) and the effect of 2 g of palm bunch ash (PBA) on the phytotoxicity of crude oil fraction on growth parameters such as percentage of seedling emergence, plant height, number of leaves, length of root, length of radical and leaf area in maize (Zea mays). Methods: A total of 180 bags containing 500 g of loamy soil each were used for this study, of which 30 bags containing loamy soil each served as control, 60 bags of soil were added each 2% crude oil fraction and 60 bags of soil were added each 2% crude oil fraction and 2 gPBA each, while 30 bags of soil contained each 2 g ofPBA only. The maize grown on the soil was harvested after 7, 14 and 21 days of seedling emergence and assessed for growth parameters. Results: The growth parameters (plant height, length of root, length of radicle, number of leaves, and leaf area) in maize were significantly reduced in the crude oil fraction treatment (P≤0.05). The treatment containingPBA was found to have significant improvement compared to the crude oil fraction contaminated treatment. Conclusions: The study has revealed the deleterious effect of crude oil at 2% on maize and its effect was ameliorated usingPBA.

Essential oils and crude extracts from Chrysanthemum trifurcatum leaves, stems and roots: chemical composition and antibacterial activity.

Science.gov (United States)

Sassi, Ahlem Ben; Skhiri, Fethia Harzallah; Chraief, Imed; Bourgougnon, Nathalie; Hammami, Mohamed; Aouni, Mahjoub

2014-01-01

The essential oils from the leaves, stems and roots of Chrysanthemum trifurcatum (Desf.) Batt. and Trab. var. macrocephalum (viv.) were obtained by hydrodistillation and their chemical compositions were analysed by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS), in order to get insight into similarities and differences as to their active composition. A total of fifty compounds were identified, constituting 97.84%, 99.02% and 98.20% of total oil composition of the leaves, stems and roots, respectively. Monoterpene hydrocarbons were shown to be the main group of constituents of the leaves and stems parts in the ratio of 67.88% and 51.29%, respectively. But, the major group in the roots oil was found to be sesquiterpene hydrocarbons (70.30%). The main compounds in leaves oil were limonene (26.83%), γ-terpinene (19.68%), α-pinene (9.7%) and α-terpenyl acetate (7.16%). The stems oil, contains mainly limonene (32.91%), 4-terpenyl acetate (16.33%) and γ-terpinene (5.93%), whereas the main compounds in roots oil were α-calacorene (25.98%), α-cedrene (16.55%), β-bourbobene (14.91%), elemol (7.45%) and 2-hexenal (6.88%). The crude organic extracts of leaves, stems and roots, obtained by maceration with solvents of increasing polarity: petroleum ether, ethyl acetate and methanol, contained tannins, flavonoids and alkaloids. Meanwhile, essential oils and organic extracts were tested for antibacterial activities against eight Gram-positive and Gram-negative strains, using a microdilution method. The oil and methanolic extact from C. trifurcatum leaves showed a great potential of antibacterial effect against Bacillus subtilis and Staphylococcus epidermidis, with an IC50 range of 31.25-62.5 µg/ml.

Large-eddy simulation of pollutant dispersion from a ground-level area source over urban street canyons with irreversible chemical reactions

Science.gov (United States)

Du, T. Z.; Liu, C.-H.; Zhao, Y. B.

2014-10-01

In this study, the dispersion of chemically reactive pollutants is calculated by large-eddy simulation (LES) in a neutrally stratified urban canopy layer (UCL) over urban areas. As a pilot attempt, idealized street canyons of unity building-height-to-street-width (aspect) ratio are used. Nitric oxide (NO) is emitted from the ground surface of the first street canyon into the domain doped with ozone (O3). In the absence of ultraviolet radiation, this irreversible chemistry produces nitrogen dioxide (NO2), developing a reactive plume over the rough urban surface. A range of timescales of turbulence and chemistry are utilized to examine the mechanism of turbulent mixing and chemical reactions in the UCL. The Damköhler number (Da) and the reaction rate (r) are analyzed along the vertical direction on the plane normal to the prevailing flow at 10 m after the source. The maximum reaction rate peaks at an elevation where Damköhler number Da is equal or close to unity. Hence, comparable timescales of turbulence and reaction could enhance the chemical reactions in the plume.

Leadership Strategies for Maintaining Profitability in a Volatile Crude Oil Market

Science.gov (United States)

Braimoh, Lucky Anderson

Volatile crude oil prices significantly affect the profitability of crude oil firms. The purpose of this single case study was to explore strategies some crude oil and gas business leaders used to remain profitable during periods of crude oil price volatility. The target population comprised 8 crude oil and gas business leaders located in Calgary, Canada, whose company remained profitable despite crude oil price volatility. The transformational leadership theory formed the conceptual framework for the study. Data were collected through the use of semistructured face-to-face interviews, company reports, and field notes. Data analysis involved a modified Van Kamm method, which included descriptive coding, a sequential review of the interview transcripts, and member checking. Based on methodological triangulation and thematic analysis, 5 themes emerged from the study, including communication and engagement; motivation and empowerment; measurement, monitoring, and control; self-awareness and humility; and efficiency and optimization. The implications for social change include the potential for crude oil and gas companies in Calgary, Canada to manage production costs, ensure earnings and profitability, and thus improve the socioeconomic well-being of Calgary indigenes through improved employment opportunities.

Linkages between the markets for crude oil and the markets for refined products

International Nuclear Information System (INIS)

Didziulis, V.S.

1990-01-01

To understand the crude oil price determination process it is necessary to extend the analysis beyond the markets for petroleum. Crude oil prices are determined in two closely related markets: the markets for crude oil and the markets for refined products. An econometric-linear programming model was developed to capture the linkages between the markets for crude oil and refined products. In the LP refiners maximize profits given crude oil supplies, refining capacities, and prices of refined products. The objective function is profit maximization net of crude oil prices. The shadow price on crude oil gives the netback price. Refined product prices are obtained from the econometric models. The model covers the free world divided in five regions. The model is used to analyze the impacts on the markets of policies that affect crude oil supplies, the demands for refined products, and the refining industry. For each scenario analyzed the demand for crude oil is derived from the equilibrium conditions in the markets for products. The demand curve is confronted with a supply curve which maximizes revenues providing an equilibrium solution for both crude oil and product markets. The model also captures crude oil price differentials by quality. The results show that the demands for crude oil are different across regions due to the structure of the refining industries and the characteristics of the demands for refined products. Changes in the demands for products have a larger impact on the markets than changes in the refining industry. Since markets for refined products and crude oil are interrelated they can't be analyzed individually if an accurate and complete assessment of a policy is to be made. Changes in only one product market in one region affect the other product markets and the prices of crude oil

Mitigation of naphthenate related production upsets in high TAN (Total Acid Number) crude oil

Energy Technology Data Exchange (ETDEWEB)

Ostojic, Nik [Maersk Oil, Copenhagen (Denmark); Vijn, Pieter; Reiners, Robert [Champion Technologies Europe BV, Delden (Netherlands)

2012-07-01

This paper describes a strategy for prediction, evaluation and mitigation of calcium naphthenate related production problems. Developing fields with acidic crude in the North Sea, West Africa, Bohai Bay (China) and Brazil is becoming more common in recent years. The high acid crude contains a considerable amount of naphthenic acids, typically having a Total Acid Number (TAN) higher than 0.5 mg KOH/g. Formation of either hard type 'calcium naphthenate precipitates' or soft type 'sodium carboxylate/emulsions' during crude oil production can lead to severe flow assurance and separation problems. In severe cases this may lead to production shutdowns to clean-up the equipment. A number of different naphthenate mitigation approaches have been published but no one particular approach is considered to be the most efficient as it depends significantly on the particular field conditions. Initially, this problem was addressed by deploying large volumes of (usually organic) acid, but more recently high efficiency low dose naphthenate inhibitors have been introduced. For predicting naphthenate scaling potential, methods were developed to determine the concentration of 1230 Dalton naphthenic tetra acid (ARN acids) in either deposit or crude oil and this information can be used to locate and potentially isolate the problem to a certain reservoir. Also, methods were developed to design suitable low dose naphthenate inhibitors. As these inhibitors are field tested, monitoring is required to ensure the product is performing most efficiently. In cases of tight emulsions however, this is less difficult as the oil dehydration and water quality is affected instantly. Methods were developed to allow monitoring of the calcium naphthenate deposition in field trails, thus allow trending and evaluation of the chemicals performance. After detailed analyses and discussions of the developed methods, a North Sea case history is presented reviewing several years of treating

Liquid ultrasonic flow meters for crude oil measurement

Energy Technology Data Exchange (ETDEWEB)

Kalivoda, Raymond J.; Lunde, Per

2005-07-01

Liquid ultrasonic flow meters (LUFMs) are gaining popularity for the accurate measurement of petroleum products. In North America the first edition of the API standard ''Measurement of liquid hydrocarbons by ultrasonic flow meters using transit time technology'' was issued in February 2005. It addresses both refined petroleum products and crude oil applications. Its field of application is mainly custody transfer applications but it does provide general guidelines for the installation and operation of LUFM's other applications such as allocation, check meters and leak detection. As with all new technologies performance claims are at times exaggerated or misunderstood and application knowledge is limited. Since ultrasonic meters have no moving parts they appear to have fewer limitations than other liquid flow meters. Liquids ultrasonic flow meters, like turbine meters, are sensitive to fluid properties. It is increasingly more difficult to apply on high viscosity products then on lighter hydrocarbon products. Therefore application data or experience on the measurement of refined or light crude oil may not necessarily be transferred to measuring medium to heavy crude oils. Before better and more quantitative knowledge is available on how LUFMs react on different fluids, the arguments advocating reduced need for in-situ proving and increased dependency on laboratory flow calibration (e.g. using water instead of hydrocarbons) may be questionable. The present paper explores the accurate measurement of crude oil with liquid ultrasonic meters. It defines the unique characteristics of the different API grades of crude oils and how they can affect the accuracy of the liquid ultrasonic measurement. Flow testing results using a new LUFM design are discussed. The paper is intended to provide increased insight into the potentials and limitations of crude oil measurement using ultrasonic flow meters. (author) (tk)

[Studies on chemical protectors against radiation. XXXII. Protective effects of methanol extracts of various Taiwan crude drugs on radiation injuries].

Science.gov (United States)

Wang, C M; Ohta, S; Shinoda, M

1990-11-01

This study is to investigate radioprotective effects of 23 Taiwan crude drugs on X-ray induced bone marrow death and skin injury in mice. Each methanol extract of these Taiwan crude drugs was injected intraperitoneally into ICR male mice at 6 weeks of age before irradiation. Mice were whole-body irradiated with a soft X-ray generator. Radiation factors of the two screening tests used were as follows: 70 kVp, 10 mA, 10 mm acrylate filter, 70R/min, 2100R for survival test, and 30 kVp, 10 mA, 190R/min, 1100R for protective test on skin injury. As a result of these studies, the survival effect was recognized in Solani Incani Herba and Orthosiphi Aristati Herba. On the other hand, Mimosae Herba, Canarii Radix, Bombacis Radix, Arecae Fructus, Hedyotidis Diffusae Herba and Cynomorii Caulis were shown to have significant protective potency on skin injury.

New contact system in crude oil desalting process

International Nuclear Information System (INIS)

Forero, J; Duque; Diaz, J; Nunez, A; Guarin, F; Carvajal, F

2001-01-01

The effect of the ICP contactor and the mixture valve on the desalting process was evaluated as a contact system in the crude oil washing process. The evaluation was carried out in the two desalters at the Cartagena refinery (GRC) and a desalter at the Barrancabermeja refinery (GCB) of ECOPETROL. The pressure drop was measured and the efficiency of the desalting processes, dehydration and hydrocarbon crude intake in the water was calculated based on the BS and W measurement, salt content and hydrocarbon concentration in the water. Results showed that the contactor improved desalting, water in the crude oil was reduced and crude carry-over in the wastewater was reduced between 50 and 92% at the Barrancabermeja refinery, and between 40 and 95% at the Cartagena refinery, which mean savings of approximately us$ 373.000 dollars per year at both refineries, due to the fact that less water is loaded into the process. Furthermore, hydrocarbon 1055 in wastewater was reduced by about 3650 barrels per year. The pressure drop was reduced between 88 and 94 % in relation to the mixing valve

Chemical composition, true metabolisable energy content and ...

African Journals Online (AJOL)

The physical characteristics (thousand seed and hectolitre mass), chemical composition (dry matter, ash, crude protein (CP), ether extract, acid detergent fibre, neutral detergent fibre and mineral content), energy values (nitrogen corrected true metabolisable energy content (TMEn for roosters)) as well as the lysine and ...

Sacrificial amphiphiles: Eco-friendly chemical herders as oil spill mitigation chemicals.

Science.gov (United States)

Gupta, Deeksha; Sarker, Bivas; Thadikaran, Keith; John, Vijay; Maldarelli, Charles; John, George

2015-06-01

Crude oil spills are a major threat to marine biota and the environment. When light crude oil spills on water, it forms a thin layer that is difficult to clean by any methods of oil spill response. Under these circumstances, a special type of amphiphile termed as "chemical herder" is sprayed onto the water surrounding the spilled oil. The amphiphile forms a monomolecular layer on the water surface, reducing the air-sea surface tension and causing the oil slick to retract into a thick mass that can be burnt in situ. The current best-known chemical herders are chemically stable and nonbiodegradable, and hence remain in the marine ecosystem for years. We architect an eco-friendly, sacrificial, and effective green herder derived from the plant-based small-molecule phytol, which is abundant in the marine environment, as an alternative to the current chemical herders. Phytol consists of a regularly branched chain of isoprene units that form the hydrophobe of the amphiphile; the chain is esterified to cationic groups to form the polar group. The ester linkage is proximal to an allyl bond in phytol, which facilitates the hydrolysis of the amphiphile after adsorption to the sea surface into the phytol hydrophobic tail, which along with the unhydrolyzed herder, remains on the surface to maintain herding action, and the cationic group, which dissolves into the water column. Eventual degradation of the phytol tail and dilution of the cation make these sacrificial amphiphiles eco-friendly. The herding behavior of phytol-based amphiphiles is evaluated as a function of time, temperature, and water salinity to examine their versatility under different conditions, ranging from ice-cold water to hot water. The green chemical herder retracted oil slicks by up to ~500, 700, and 2500% at 5°, 20°, and 35°C, respectively, during the first 10 min of the experiment, which is on a par with the current best chemical herders in practice.

Eastern Canadian crude oil supply and its implications for regional energy security

International Nuclear Information System (INIS)

Hughes, Larry

2010-01-01

Canada has been blessed with immense energy resources; however, their distribution is not uniform. One such example is crude oil, which is found primarily in western Canada. Eastern Canada, consisting of the six eastern-most provinces (Newfoundland and Labrador, New Brunswick, Nova Scotia, Ontario, Prince Edward Island, and Quebec), produce limited quantities of crude oil, most of which is exported to the United States. Ideally, western Canadian crude oil would meet the demands of eastern Canada; however, the North American Free Trade Agreement (NAFTA) and the absence of oil pipelines means that eastern Canada increasingly relies on supplies of crude oil from a small number of oil exporting countries, many with declining production. This paper examines crude oil production, supply, and its refining in eastern Canada. It shows that crude production in the region has reached its peak and that increasing global competition for crude oil will affect energy security in eastern Canada, either through price increases or supply shortages, or both. (author)

Adsorption of an anionic dispersant on lignite

Energy Technology Data Exchange (ETDEWEB)

Yavuz, R.; Kucukbayrak, S. [Istanbul Technical University, Istanbul (Turkey). Dept. of Chemical Engineering, Chemical & Metallurgical Engineering Faculty

2001-12-01

Since coal is not a homogeneous substance but a mixture of carbonaceous materials and mineral matter, it has a variety of surface properties. Therefore, it is not easy to control the properties of coal suspensions by simply adjusting variables, such as pH and/or electrolyte. A chemical agent needs to be added to control the properties of the coal suspensions. The adsorption behavior of an anionic dispersant in the presence of a wetting agent using some Turkish lignite samples was investigated. The effects of dispersant concentration, temperature and pH on the dispersant adsorption were studied systematically, and the experimental results are presented. Pellupur B69 as a dispersant, commercial mixture of formaldehyde condensate sodium salt of naphthalene sulphonic acid, and Texapon N{sub 2}5 as a wetting agent, a sodium lauryl ether sulfate, have been used.

Bioremediation Potential of Native Hydrocarbons Degrading Bacteria in Crude Oil Polluted Soil

Directory of Open Access Journals (Sweden)

Mariana MARINESCU

2017-05-01

Full Text Available Bioremediation of crude oil contaminated soil is an effective process to clean petroleum pollutants from the environment. Crude oil bioremediation of soils is limited by the bacteria activity in degrading the spills hydrocarbons. Native crude oil degrading bacteria were isolated from different crude oil polluted soils. The isolated bacteria belong to the genera Pseudomonas, Mycobacterium, Arthrobacter and Bacillus. A natural biodegradable product and bacterial inoculum were used for total petroleum hydrocarbon (TPH removal from an artificial polluted soil. For soil polluted with 5% crude oil, the bacterial top, including those placed in the soil by inoculation was 30 days after impact, respectively 7 days after inoculum application, while in soil polluted with 10% crude oil,  multiplication top of bacteria was observed in the determination made at 45 days after impact and 21 days after inoculum application, showing once again how necessary is for microorganisms habituation and adaptation to environment being a function of pollutant concentration. The microorganisms inoculated showed a slight adaptability in soil polluted with 5% crude oil, but complete inhibition in the first 30 days of experiment at 10% crude oil.

Refinery plugging by residual oil gellant chemicals in crude : understanding and preventing the problem through new oil gellant chemistry

Energy Technology Data Exchange (ETDEWEB)

Taylor, R.S.; Cheng, A.; Tamayo, C.; Funkhouser, G.P. [Halliburton, Calgary, AB (Canada); Stemler, P. [Petro-Canada Oil and Gas, Inc., Calgary, AB (Canada); Lemieux, A. [Omnicon Consultants Inc., Edmonton, AB (Canada)

2004-07-01

Phosphate ester oil gellants are the most prevalent oil gellant technology in use by service companies. However, in 1995, they were found to be responsible for plugging distillation trays at 3 refineries across Canada including Imperial Oil's Strathcona refinery in Edmonton, Petro-Canada's refinery in Oakville, Ontario and Chevron's refinery in Burnaby, British Columbia. Since 1998, additional fouling has occurred in Canada, and in 2002, fouling was detected at a refinery in Pennsylvania while processing Canadian sweet, light crude. Since refiners pay a high cost for unscheduled refinery shutdowns, much effort has gone into solving this problem and to maintain the value of Canadian sweet, light crude. Studies by the Canadian Crude Quality Technical Association (CCQTA) have shown that phosphate esters begin to decompose through hydrolysis of the ester linkage at approximately 240 degrees. Gases cool as they move up the tower through distillation trays. Trays in the temperature range of 230 to 290 degrees C produce most of the volatile phosphorous compounds that condense out of the gas phase and cause plugging, thereby reducing the efficiency of distillation. Phosphate esters are often used with a metal crosslinker such as ferric iron or aluminium to gel hydrocarbons for use as a fracturing fluid. This paper described the advantages of existing ferric iron-crosslinked phosphate ester oil gels over the older, alternative oil gellant chemistries. Carbon dioxide-miscible, gelled hydrocarbon fracturing fluids provide better well stimulation by avoiding capillary pressure effects associated with water-based fluids. The fluid properties of the new phosphonate ester system were compared to those of a conventional phosphate ester system. Field tests from two fracturing treatments were also presented. Plugging did not occur with the new phosphonate ester treatment. 6 refs., 1 tab., 12 figs.

Spill-of-opportunity testing of dispersant effectiveness at the Mega Borg oil spill

International Nuclear Information System (INIS)

Payne, J.R.; Martrano, R.J.; Reilly, T.J.; Lindblom, G.P.; Kennicutt, M.C. II; Brooks, J.M.

1993-01-01

The release of 3.9 million gallons of Angola Planca crude oil from the stricken tanker Mega Borg 57 miles offshore of Galveston, Texas in June 1990 provided a valuable opportunity to document dispersant effectiveness under field conditions. Aerial application of Corexit 9527 (968 gallons total in four adjacent passes) onto an identified test portion of the slick was evaluated by concurrent observations from a command-and-control aircraft and surface vessels (with videotape and 35-mm photographic documentation) and ground truth measurements, including continuous 4-meter-depth ultraviolet/fluorescence and a discrete water sampling program. Using the study plan outlined by Payne and colleagues, target and control areas were designated before dispersant application by deployment of smoke bombs and coded three-meter drogues. Postdispersant surface vessel placement and 30 liter water sampling activities from the Texas A ampersand M research vessel HOS Citation were aided by the smoke bombs, the free-drifting drogues, and directions from the command-and-control aircraft. Subsequent FID GC and GC/MS analyses of water sample extracts allowed quantitation of the dispersed oil concentrations under both treated and control areas. Although the spilled oil was extremely light (API gravity 39.0) and subject to significant natural dispersion, the field observations, filmed documentation, and water column data clearly demonstrated an increase in dispersed oil concentrations beneath the treated slick. The distribution of dispersed oil droplets was very heterogeneous and reflected the patchy distribution of oil on the water surface before dispersant application. Maximum concentrations of dispersed hydrocarbons in the center of the treated zone were 22,000 μg/L (22 ppm) for total aliphatic and 5.6 μg/L (5.6 ppb) for total aromatics 60 to 90 minutes after dispersant application. Elevated levels were generally limited to the upper 1 to 3 meters of the water column

Feasibility Process for Remediation of the Crude Oil Contaminated Soil

Science.gov (United States)

Keum, H.; Choi, H.; Heo, H.; Lee, S.; Kang, G.

2015-12-01

More than 600 oil wells were destroyed in Kuwait by Iraqi in 1991. During the war, over 300 oil lakes with depth of up to 2m at more than 500 different locations which has been over 49km2. Therefore, approximately 22 million m3was crude oil contaminated. As exposure of more than 20 years under atmospheric conditions of Kuwait, the crude oil has volatile hydrocarbons and covered heavy oily sludge under the crude oil lake. One of crude oil contaminated soil which located Burgan Oilfield area was collected by Kuwait Oil Company and got by H-plus Company. This contaminated soil has about 42% crude oil and could not biodegraded itself due to the extremely high toxicity. This contaminated soil was separated by 2mm sieve for removal oil sludge ball. Total petroleum hydrocarbons (TPH) was analysis by GC FID and initial TPH concentration was average 48,783 mg/kg. Ten grams of the contaminated soil replaced in two micro reactors with 20mL of bio surfactant produce microorganism. Reactor 1 was added 0.1g powder hemoglobin and other reactor was not added hemoglobin at time 0 day. Those reactors shake 120 rpm on the shaker for 7 days and CO2 produced about 150mg/L per day. After 7 days under the slurry systems, the rest days operated by hemoglobin as primary carbon source for enhanced biodegradation. The crude oil contaminated soil was degraded from 48,783mg/kg to 20,234mg/kg by slurry process and final TPH concentration degraded 11,324mg/kg for 21days. Therefore, highly contaminated soil by crude oil will be combined bio slurry process and biodegradation process with hemoglobin as bio catalytic source. Keywords: crude-oil contaminated soil, bio slurry, biodegradation, hemoglobin ACKOWLEDGEMENTS This project was supported by the Korea Ministry of Environment (MOE) GAIA Program

Phytochemical and anti-fungal activity of crude extracts, fractions ...

African Journals Online (AJOL)

The Minimum Inhibitory Concentrations (MIC) of the crude extracts, fractions and isolated compound were determined by agardilution. Bioassay-guided fractionation of the crude extracts was carried out using column chromatography. Results: The phytochemical screening revealed the presence of alkaloids, cardenolides, ...

Implications of lifting the ban on the export of Alaskan crude oil

Energy Technology Data Exchange (ETDEWEB)

1990-03-26

Present legislation effectively bans the export of crude oil produced in the United States. The ban has been in effect for years and is particularly stringent with respect to crude oil produced in Alaska, particularly on the North Slope. The Alaska crude export ban is specifically provided for in the Trans-Alaska Pipeline Authorization Act of 1973 and in other legislation. It was imposed for two reasons. The first was to reduce US dependence on imported crude oil. The Arab oil embargo had been imposed shortly before the Act was passed and a greater measure of energy independence was considered imperative at that time. The second reason was to assure that funds expended in building an Alaskan pipeline would benefit domestic users rather than simply employed to facilitate shipments to other countries. The main objective of this report is to estimate the potential impacts on crude oil prices that would result from lifting the export ban Alaskan crude oil. The report focuses on the Japanese market and the US West Coast market. Japan is the principal potential export market for Alaskan crude oil. Exports to that market would also affect the price of Alaskan crude oil as well as crude oil and product prices on the West Coast and the volume of petroleum imported in that area. 3 figs., 8 tabs.

Comparison of the mopping ability of chemically modified and unmodified biological wastes on crude oil and its lower fractions.

Science.gov (United States)

Nduka, John Kanayochukwu; Ezenweke, Linus Obi; Ezenwa, Emmanuel Tagbo

2008-11-01

Activated and unactivated powders of goat hair and coir (coconut husk) separated into two particle sizes were used to mop up spills of crude oil, diesel, kerosene and petrol. It was observed that the materials (sorbents) mopped up appreciable volumes of the hydrocarbon liquids (sorbates) within 90 min of contact. Activation, particle size of sorbents and molecular weight (chain length) of sorbates (hydrocarbon) are major determining factors. Carbonization and particle size enhanced the mopping ability as follows--carbonized 325 microm > uncarbonized 325 microm > carbonized 625 microm > uncarbonized 625 microm, thus activated sorbents with large surface area (small particle size) mopped more hydrocarbons than unactivated of the same particle size. The sorbates were mopped in the order--crude oil > diesel > kerosene > petrol. It was further observed that goat hair (keratin protein) with oleophilic and aquaphobic properties adsorbed more of all the hydrocarbons than coir at all sizes and treatment. Large quantities of the mopped oils were recovered by mere pressing while the waste sorbents with 0.5-2.0% leachable residual oil could be utilized as alternative to fire wood.

Comparative Study of Crude Oil Contamination Effect on Industrial and Forest Soil Microbial Community

Directory of Open Access Journals (Sweden)

Nasrin Ansari

2017-02-01

Full Text Available Introduction: Petroleum hydrocarbons are widespread pollutant that enters to soil by some pathwayssuch as: Transportation of crude oil, conservation of oil compounds, crude oil spill and treatment process on refineries. Oil pollution has some ecological effect on soil that disturbed composition and diversity of microbial community. Also this pollution has some effects on microbial activity and enzymes of soil. Forests ecosystems may be polluted with petroleum hydrocarbons via different ways such as transportation and spill of crude oil from resource of petroleum storage. Industrial soil defined as the soils that located in industrial area such as petrochemical plant, mine, chemical factories and etc. These soils always contaminated to many pollutant such as: oil, diesel and heavy metals. These pollutants have some effects on the texture of the soil and microbial community. The aim of this research is to understand the effect of oil pollution on two different soils. Material and Methods: In order to evaluate the effect of crude oil on soil microbial community, two different soil samples were collected from industrial and forest soils. Six microcosms were designed in this experiment. Indeed each soil sample examined inthree microcosms asunpolluted microcosm, polluted microcosm, and polluted microcosm with nutrient supply of Nitrogen and PhosphorusSome factors were assayed in each microcosm during 120 days of experiment. The included study factors were: total heterotrophic bacteria, total crude oil degrading bacteria, dehydrogenase enzyme and crude oil biodegradation. For enumeration of heterotrophic bacteria nutrient agar medium was used. In this method serial dilutions were done from each soil and spread on nutrient agar medium then different colonies were counted. For enumeration of degrading bacteria Bushnel-Hass (BH medium were used. The composition of this medium was (g/lit: 1 gr KH2PO4, 1gr K2HPO4, 0.2 gr MgSO4.7H2O, 0.02 gr CaCl2, 1 gr NH4

Lifting the US crude oil export ban: A numerical partial equilibrium analysis

International Nuclear Information System (INIS)

Langer, Lissy; Huppmann, Daniel; Holz, Franziska

2016-01-01

The upheaval in global crude oil markets and the boom in shale oil production in North America brought scrutiny on the US export ban for crude oil from 1975. The ban was eventually lifted in early 2016. This paper examines the shifts of global trade flows and strategic refinery investments in a spatial, game-theoretic partial equilibrium model. We consider detailed oil supply chain infrastructure with multiple crude oil types, distinct oil products, as well as specific refinery configurations and modes of transport. Prices, quantities produced and consumed, as well as infrastructure and refining capacity investments are endogenous to the model. We compare two scenarios: an insulated US crude oil market, and a counter-factual with lifted export restrictions. We find a significant expansion of US sweet crude exports with the lift of the export ban. In the US refinery sector, more (imported) heavy sour crude is transformed. Countries importing US sweet crude gain from higher product output, while avoiding costly refinery investments. Producers of heavy sour crude (e.g. the Middle East) are incentivised to climb up the value chain to defend their market share and maintain their dominant position. - Highlights: • We study the impacts of lifting the US crude ban on global oil flows and investments. • We find massive expansion of US sweet crude oil exports. • We analyze the resulting welfare effects for US producers, refiners and consumers. • We indicate the changes on global trade patterns. • We conclude that lifting the ban is the right policy for the US and the global economy.

How is the international price of a particular crude determined?

International Nuclear Information System (INIS)

Hagen, Ronald

1994-01-01

If crude oil or oil products are not the final item of consumption, then oil is not bought or sold on any basis other than its contribution to the final product. The markets of oil products are thus 'derived' from more basic demands, and prices are determined by what they contribute to the costs of producing final products or commodities. Similarly, the value of a crude oil is derived from the value of the petroleum products it yields. This paper attempts to show how differences in crude oil prices seem to occur. The results should be of interest to producers of crude oil, since they will demonstrate how the marketability of their products might vary. (author)

High temperature corrosion control and monitoring for processing acidic crudes

Energy Technology Data Exchange (ETDEWEB)

Cross, C. [Betz/GE Water and Process Technologies, Woodlands, TX (United States)

2009-07-01

The challenge of processing heavy crudes and bitumen in a reliable and economical way was discussed. Many refiners use a conservative approach regarding the rate at which they use discounted crudes or depend upon capital-intensive upgrades to equipment. New strategies based on data-driven decisions are needed in order to obtain the greatest benefit from heavy feedstock. The feasibility of successfully processing more challenging feed can be estimated more accurately by better understanding the interactions between a particular feed and a particular crude unit. This presentation reviewed newly developed techniques that refiners can use to determine the feeds corrosion potential and the probability for this potential to manifest itself in a given crude unit. tabs., figs.

High-fiber diets with reduced crude protein for commercial layers

Directory of Open Access Journals (Sweden)

MFFM Praes

2014-06-01

Full Text Available This study aimed at evaluating diets containing different fiber sources and two crude protein levels on the performance, egg quality, and nitrogen metabolism of commercial layers. In total, 392 48-wk-old Isa Brown layers were distributed according to a completely randomized experimental design in a 3x2+1 (control factorial arrangement, resulting in seven treatments with seven replicates of eight birds each. Treatments consisted of three fiber feedstuffs (cottonseed hulls, soybean hulls, and rice hulls and two dietary crude protein levels (12% and 16%. Cottonseed hulls associated with the high crude protein level (16% resulted in the worst feed conversion ratio per dozen eggs. Diets with 16% crude protein resulted in the highest feed intake, egg production, egg weight, egg mass values, and improved feed conversion ratio (kg eggs/kg feed. The dietary inclusion of soybean hulls determined low yolk pigmentation, and of rice hulls, low egg specific gravity. The 16% crude protein diet with rice hulls promoted the best feed conversion ratio. Hens fed the reference diet presented higher egg mass and better feed conversion ratio per kg eggs and per dozen eggs. Hens fed the diets with low crude protein level (12% had reduced nitrogen excretion, but presented worse egg production.

A new continuous-time formulation for scheduling crude oil operations

International Nuclear Information System (INIS)

Reddy, P. Chandra Prakash; Karimi, I.A.; Srinivasan, R.

2004-01-01

In today's competitive business climate characterized by uncertain oil markets, responding effectively and speedily to market forces, while maintaining reliable operations, is crucial to a refinery's bottom line. Optimal crude oil scheduling enables cost reduction by using cheaper crudes intelligently, minimizing crude changeovers, and avoiding ship demurrage. So far, only discrete-time formulations have stood up to the challenge of this important, nonlinear problem. A continuous-time formulation would portend numerous advantages, however, existing work in this area has just begun to scratch the surface. In this paper, we present the first complete continuous-time mixed integer linear programming (MILP) formulation for the short-term scheduling of operations in a refinery that receives crude from very large crude carriers via a high-volume single buoy mooring pipeline. This novel formulation accounts for real-world operational practices. We use an iterative algorithm to eliminate the crude composition discrepancy that has proven to be the Achilles heel for existing formulations. While it does not guarantee global optimality, the algorithm needs only MILP solutions and obtains excellent maximum-profit schedules for industrial problems with up to 7 days of scheduling horizon. We also report the first comparison of discrete- vs. continuous-time formulations for this complex problem. (Author)

Modeling of well drilling heating on crude oil using microwave

Energy Technology Data Exchange (ETDEWEB)

Muntini, Melania Suweni, E-mail: melania@physics.its.ac.id; Pramono, Yono Hadi; Yustiana [Physics Department, Institut Teknologi Sepuluh Nopember, Surabaya Kampus ITS, Sukolilo, Surabaya 60111 (Indonesia)

2016-03-11

As the world’s oil reserves are dwindling, some researchers have been prompted to make a breakthrough to further improve the efficiency of exploration and production. One of the technologies used is heating the crude oil. This paper presents the modeling results of heat treatment on crude oil using microwave energy. Modeling is conducted by assuming that the diameter of the well is 11,16 cm, the heat source is applied on the surface of the well, and the cut-off frequency in the air and on crude oil are 1,56 GHz. and 0.91 GHz, respectively. The energy generated by the microwave radiation is converted into heat energy which is absorbed by the crude oil. Consequently, this energy increases the temperature of crude oil through a heat transfer mechanism. The results obtained showed that the temperature of crude oil is about 200°C at a depth of 62.5cm, and at a distance of 3 cm from the center of the well. Temperature along the well follows an exponential function, which is from the center of the well in the direction radially outward from the cylinder axis. It has been observed that the temperature decreases as measured from the well surface along the cylinder.

Reactive dispersive contaminant transport in coastal aquifers: Numerical simulation of a reactive Henry problem

KAUST Repository

Nick, H.M.

2013-02-01

The reactive mixing between seawater and terrestrial water in coastal aquifers influences the water quality of submarine groundwater discharge. While these waters come into contact at the seawater groundwater interface by density driven flow, their chemical components dilute and react through dispersion. A larger interface and wider mixing zone may provide favorable conditions for the natural attenuation of contaminant plumes. It has been claimed that the extent of this mixing is controlled by both, porous media properties and flow conditions. In this study, the interplay between dispersion and reactive processes in coastal aquifers is investigated by means of numerical experiments. Particularly, the impact of dispersion coefficients, the velocity field induced by density driven flow and chemical component reactivities on reactive transport in such aquifers is studied. To do this, a hybrid finite-element finite-volume method and a reactive simulator are coupled, and model accuracy and applicability are assessed. A simple redox reaction is considered to describe the degradation of a contaminant which requires mixing of the contaminated groundwater and the seawater containing the terminal electron acceptor. The resulting degradation is observed for different scenarios considering different magnitudes of dispersion and chemical reactivity. Three reactive transport regimes are found: reaction controlled, reaction-dispersion controlled and dispersion controlled. Computational results suggest that the chemical components\\' reactivity as well as dispersion coefficients play a significant role on controlling reactive mixing zones and extent of contaminant removal in coastal aquifers. Further, our results confirm that the dilution index is a better alternative to the second central spatial moment of a plume to describe the mixing of reactive solutes in coastal aquifers. © 2012 Elsevier B.V.

Chemical composition and microbial load of cheese produced using ...

African Journals Online (AJOL)

Aframomum sceptrum) on the chemical composition and microbial load of cheese was evaluated in a Completely Randomized Design. Cheese produced with 1% bear berry (Aframomum sceptrum) had the highest (P < 0.05) crude protein content ...

Experimental study on yield behavior of Daqing crude oil

Energy Technology Data Exchange (ETDEWEB)

Hou, Lei [China University of Petroleum, College of Mechanical and Transportation Engineering, Beijing (China)

2012-07-15

The yield behavior of Daqing crude oil was studied by means of multi-mode controlled-stress tests with a high-precision stress controlled rheometer. Two experiments of creep and constant stress loading rate were performed. The yield stress of gelled crude oil was dependent on the test conditions such as the stress loading time and the stress loading rate, but the yield strain did not change with test conditions. The yield strain did exist objectively and it can be used as the criterion for the yielding of the structure of gelled crude oil. The yield strain of gelled oil was studied through experiments of creep, constant stress loading rate, oscillatory shear stress increase, and constant shear rate. The yield strain of gelled crude oil decreased with the increasing gel strength. The experiment of constant speed increase of stress showed the strain softening phenomena for low gel strength oil. (orig.)

Chemical characteristics and thickness of Podocnemis expansa post-hatching eggshells (Testudines, Podocnemididae

Directory of Open Access Journals (Sweden)

Caio Henrique Ferreira

2016-10-01

Full Text Available Knowledge on chemical components of the post-hatching eggshell of reptiles may provide indicators of the quality of the diet offered to females kept in captivity. Therefore, the objective of this study was to investigate the chemical characteristics of the calcareous layer, as well as the thickness of Podocnemis expansa post-hatching eggshells. Eggshell thickness was 183±1.405 µm. This value is similar to that of the eggs of other Testudines with flexible eggshells. As for the chemical composition, the following percentages were observed: nitrogen 7.983 ± 0.054; crude protein 49.91 ± 0.324; crude fat 0.068 ± 0.002; mineral matter 20.302 ± 0.807; calcium 13.374 ± 0.647; and phosphorus 0.176 ± 0.003. Knowledge on chemical composition of the eggshell may aid the nutrition of P. expansa raised in commercial facilities, once this species is an alternative and promising source of exotic meat.

Daily Crude Oil Price Forecasting Using Hybridizing Wavelet and Artificial Neural Network Model

Directory of Open Access Journals (Sweden)

Ani Shabri

2014-01-01

Full Text Available A new method based on integrating discrete wavelet transform and artificial neural networks (WANN model for daily crude oil price forecasting is proposed. The discrete Mallat wavelet transform is used to decompose the crude price series into one approximation series and some details series (DS. The new series obtained by adding the effective one approximation series and DS component is then used as input into the ANN model to forecast crude oil price. The relative performance of WANN model was compared to regular ANN model for crude oil forecasting at lead times of 1 day for two main crude oil price series, West Texas Intermediate (WTI and Brent crude oil spot prices. In both cases, WANN model was found to provide more accurate crude oil prices forecasts than individual ANN model.

Results of experiments with flare type igniters on diesel fuel and crude oil emulsions

International Nuclear Information System (INIS)

Moffat, C.; Hankins, P.

1997-01-01

Development of a hand-deployable igniter that could ignite contained diesel fuel and crude oil emulsions on water was described. The igniter was developed as part of the U.S. Navy Supervisor of Salvage (SUPSALV) In-Situ Burn (ISB) system. It is a manually operated, electrically fired, high temperature flare type igniter. It is 41 cm long, 10 cm in diameter, weighs 1.5 kg, and is packaged and shipped with the ISB system. The chemical and mineral composition of the flair allows for a three minute burn of up to 1370 degrees C (2500 degrees F) at the center. The flare is most effective when used in conjunction with a shroud of sorbent material which traps and holds oil around the burning flare aiding the ignition process by increasing the initial propagation area. In small-scale tank experiments the flare ignited diesel fuel in ambient temperatures of 3 degrees C, with winds of 8 to 10 m/sec. The flare also ignited 22.5 per cent water-in crude oil emulsion in 3 degrees C temperatures. 4 refs., 3 tabs

Valorisation of chicken feathers: Characterisation of chemical properties.

Science.gov (United States)

Tesfaye, Tamrat; Sithole, Bruce; Ramjugernath, Deresh; Chunilall, Viren

2017-10-01

The characterisation of the chemical properties of the whole chicken feather and its fractions (barb and rachis), was undertaken to identify opportunities for valorizing this waste product. The authors have described the physical, morphological, mechanical, electrical and thermal properties of the chicken feathers and related them to potential valorisation routes of the waste. However, identification of their chemical properties is necessary to complete a comprehensive description of chicken feather fractions. Hence, the chicken feathers were thoroughly characterised by proximate and ultimate analyses, elemental composition, spectroscopic analyses, durability in different solvents, burning test, and hydrophobicity. The proximate analysis of chicken feathers revealed the following compositions: crude lipid (0.83%), crude fibre (2.15%), crude protein (82.36%), ash (1.49%), NFE (1.02%) and moisture content (12.33%) whereas the ultimate analyses showed: carbon (64.47%), nitrogen (10.41%), oxygen (22.34%), and sulphur (2.64%). FTIR analysis revealed that the chicken feather fractions contain amide and carboxylic groups indicative of proteinious functional groups; XRD showed a crystallinity index of 22. Durability and burning tests confirmed that feathers behaved similarly to animal fibre. This reveals that chicken feather can be a valuable raw material in textile, plastic, cosmetics, pharmaceuticals, biomedical and bioenergy industries. Copyright © 2017 Elsevier Ltd. All rights reserved.

Fungitoxic properties of four crude plant extacts on fusarium ...

African Journals Online (AJOL)

Fungitoxic properties of four crude plant extacts on fusarium oxysporum schl. F. sp phaseoli. ... African Journal of Food, Agriculture, Nutrition and Development ... Crude plant extracts from Azadirachta indica, Tagetes minuta, Nicotiana tobacum and Vinca rosea were tested against Fusarium oxysporum Schl. F. sp. phaseoli.

Effects of the organic solvents addition about crude oil rheological behavior from 'Reconcavo Baiano' (Brazil); Efeito da adicao de solventes organicos sobre o comportamento reologico do petroleo cru oriundo do 'Reconcavo Baiano' (Brasil)

Energy Technology Data Exchange (ETDEWEB)

Cavalcanti, Luis A.P. [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Faculdade de Engenharia Quimica; Vieira, Jacyara M.A. [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Faculdade de Engenharia de Minas; Almeida, Yeda M.B.; Sarmento, Sandra M. [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil)

2004-07-01

The crude oil rheological properties are quite important in its transport and refining processes. They can affect the head losses and, thus, the pressure within a refining unit. These properties can be affected by the temperature and the chemical composition as well as by solvents added to the crude oil. The current work studied the rheological behaviour of both a crude oil from the Reconcavo Baiano (Brazil) and mixture of this crude oil with organic solvents (toluene and xylene). The solvent type and concentration effects on the rheological parameters, were studied. The Brookfield viscometer, model LDVD-II, was used. The results brought to light that the crude oil and the crude oil-solvent mixtures behaved, discretely, as thixotropic fluids. The model of Herschel-Bulkley for viscoplastic fluid was the best in fitting the experimental data for both crude oil and crude oil - solvent mixture. The toluene was found to be more efficient in reducing both the apparent viscosity and apparent yield stress of the crude oil than the xylene for a given concentration. The solvent concentration affects indirectly the rheological properties of the crude oil. (author)

Synthesis and characterization of M-type barium hexferrite by ultrasonic inter-dispersion of chemical precipitate

International Nuclear Information System (INIS)

Garcia Junior, E.S.; Gomes Junior, G.G.; Ogasawara, T.

2010-01-01

This work is concerned with the study the synthesis and characterization of M-type barium hexaferrite powder by chemical precipitation type and ultrasonic interdispersion of precursor materials Fe(OH) 3 and Ba(OH) 2 ,separately and ultrasonic inter-dispersion, followed by drying and calcining. In order to guide the experimental work was carried out a preliminary thermodynamic analysis of the system Ba-Fe-H 2 O at 25 deg C. The study shows that the phase formation of M-type barium hexaferrite is obtained at a calcination at 1000 deg C, characterized by X-ray diffraction, the grain growth of the final product of synthesis depending on the calcination temperature is visible by SEM. The synthesis method developed in this research is an option to achieve the results that would be obtained if the co-precipitation of ferric and barium hydroxide was thermodynamically possible, where you can get crystallization of barium hexaferrite in a calcination at 1000 deg C. (author)

Influence of the type of crude oil to platforming effects

International Nuclear Information System (INIS)

Kafedzhiski, Branko; Crvenkova, Suzana; Zikovski, Toni

1999-01-01

Platforming in one of the most subtleties processing in refinery industry and it is permanent source for research and finding out the higher optimum degree. Optimum of the last effects of platforming directly depends on many parameters. One of more important parameters is the type of crude. The purpose of this work is presenting positive and negative effect to the platforming parameters caused by different types of crude in OCTA-Crude Oil Refinery -Skopje, Macedonia. (Original)

Well-dispersed gold nanowire suspension for assembly application

International Nuclear Information System (INIS)

Xu Cailing; Zhang Li; Zhang Haoli; Li Hulin

2005-01-01

A method for fabricating well-dispersed nanowire suspension has been demonstrated in the paper. Thin gold nanowires were prepared by template synthesis, and then functionalized with sulphonate group-terminated thiols before suspended in different solvents. The degree of aggregation of the obtained suspension was evaluated with transmission electron microscopy (TEM) and UV-vis spectroscopy. It was found that the degree of aggregation was predominated by the solvents, and the best degree of dispersion was obtained when isopropyl alcohol (IPA) was used as the solvent. The gold nanowires from the suspension can be selectively assembled onto chemically patterned substrates. This well-dispersed nanowire suspension is potentially useful for fabricating novel nanodevices

Utilization of microbial oil obtained from crude glycerol for the production of polyol and its subsequent conversion to polyurethane foams.

Science.gov (United States)

Uprety, Bijaya K; Reddy, Jayanth Venkatarama; Dalli, Sai Swaroop; Rakshit, Sudip K

2017-07-01

We have demonstrated possible use of microbial oil in biopolymer industries. Microbial oil was produced from biodiesel based crude glycerol and subsequently converted into polyol. Fermentation of crude glycerol in a batch bioreactor using Rhodosporidium toruloides ATCC 10788 produced 18.69g/L of lipid at the end of 7days. The microbial oil was then chemically converted to polyol and characterized using FT-IR and 1 H NMR. For comparison, canola oil and palm oil were also converted into their respective polyols. The hydroxyl numbers of polyols from canola, palm and microbial oil were found to be 266.86, 222.32 and 230.30 (mgKOH/g of sample) respectively. All the polyols were further converted into rigid and semi-rigid polyurethanes (maintaining the molar -NCO/-OH ratio of 1.1) to examine their suitability in polymer applications. Conversion of microbial lipid to polyurethane foam also provides a new route for the production of polymers using biodiesel based crude glycerol. Copyright © 2017 Elsevier Ltd. All rights reserved.

Some technological aspects for functioning of crude oil pipeline Solun-OKTA

International Nuclear Information System (INIS)

Zikovski, Toni

2005-01-01

Crude oil pipeline Solun-Okta was built according to international technical, ecological and safety standards and enables quick, optimal and continuity supply of OKTA Refinery with crude oil. The building of the pipeline began in 1999 and finished in 2002 with official start-up operation by pumping of first quantity crude oil. After the activation, human environment protection has an important place. A lot of instructions and procedures are prepared specially for this purpose. With a total length about 212 km, pipeline enables transport of crude oil from ECO Refinery to OKTA with a capacity of 2.5 million tons per year. The pipeline is designed for transport of few types crude oil and their mixtures. The pipeline system has been equipped with sophisticated and modern equipment, which will enable quality of the work by controlling and monitoring of the system. (Author)

Some technological aspects for functioning of crude oil pipeline Solun-Okta

International Nuclear Information System (INIS)

Zikovski, Toni

2005-01-01

Crude oil pipeline Solun-Okta was built according to international technical, ecological and safety standards and enables quick, optimal and continuity supply of OKTA Refinery with crude oil. The building of the pipeline began in 1999 and finished in 2002 with official start-up operation by pumping of first quantity crude oil. After the activation, human environment protection has an important place. A lot of instructions and procedures are prepared specially for this purpose. With a total length about 212 km, pipeline enables transport of crude oil from ECO Refinery to OKTA with a capacity of 2.5 million tons per year. The pipeline is designed for transport of few types crude oil and their mixtures. The pipeline system has been equipped with sophisticated and modern equipment, which will enable quality of the work by controlling and monitoring of the system. (Author)

Import demand of crude oil and economic growth. Evidence from India

International Nuclear Information System (INIS)

Ghosh, Sajal

2009-01-01

This study establishes a long-run equilibrium relationship among quantity of crude oil import, income and price of the imported crude in India for the time span 1970-1971 to 2005-2006 using autoregressive distributed lag (ARDL) bounds testing approach of cointegration. Empirical results show that the long-term income elasticity of imported crude in India is 1.97 and there exists a unidirectional long-run causality running from economic growth to crude oil import. So reduction of crude oil import will not affect the future economic growth in India in the long-run. India should take various energy efficiency and demand side management measures in transport sector along with other measures like expanding and strengthening indigenous resource-base, substituting imported fuels by domestic fuels and de-controlling the price of petroleum products to reduce its import dependence. (author)

Working document dispersion models

International Nuclear Information System (INIS)

Dop, H. van

1988-01-01

This report is a summary of the most important results from June 1985 of the collaboration of the RIVM (Dutch National Institute for Public Health and Environment Hygiene) and KNMI (Royal Dutch Meteorologic Institute) on the domain of dispersion models. It contains a short description of the actual SO x /NO x -model. Furthermore it contains recommendations for modifications of some numerical-mathematical aspects and an impulse to a more complete description of chemical processes in the atmosphere and the (wet) deposition process. A separate chapter is devoted to the preparation of meteorologic data which are relevant for dispersion as well as atmospheric chemistry and deposition. This report serves as working document for the final formulation of a acidifying- and oxidant-model. (H.W.). 69 refs.; 51 figs.; 13 tabs.; 3 schemes

A numerical study of air pollutant dispersion with bimolecular chemical reactions in an urban street canyon using large-eddy simulation

Science.gov (United States)

Kikumoto, Hideki; Ooka, Ryozo

2012-07-01

A large-eddy simulation is performed on a turbulent dispersion of chemically reactive air pollutants in a two-dimensional urban street canyon with an aspect ratio of 1.0. Nitrogen monoxide emitted from a line-source set on the bottom of the street canyon disperses and reacts with Ozone included in a free stream. The reactions have significant influences on the concentrations of pollutants in the canyon space, and they increase the concentrations of the reaction products relative to of the concentrations of the reactants. The transport of air pollutants through a free shear layer above the canyon is closely related to the structure of the turbulence. Gases in the canyon are mainly exhausted when low-speed regions appear above the canyon. In contrast, pollutants in the free stream flow into the canyon with high-speed fluid bodies. Consequently, the correlation between the time fluctuations of the reactants' concentrations strongly affects the reaction rates in the region near the free shear layer. In this calculation, the correlation term reaches to a value of 20% of the mean reaction rate at a maximum there.

Investigation of Heavy Organics Precipitation from Nigerian Crude ...

African Journals Online (AJOL)

ADOWIE PERE

ABSTRACT: The effects of mixing two n-alkane solvents on the precipitation of heavy organics in crude oil were carried out. The crude oil sample sourced from a major operative in Nigeria was distilled at 240oC and used for the precipitation experiment. The binary mixture of n-alkane solvents (C6: C10, C6: C16, C10: C14, ...

Chemical Composition and Bioactive Compounds of Some Wild Edible Mushrooms

Directory of Open Access Journals (Sweden)

Melinda NAGY

2017-05-01

Full Text Available Over the last decades, the consumption of mushrooms has significantly increased due to the scientific evidence of their ability to help the organism in the combat and prevention of several diseases (Kalac, 2009. Fruiting bodies of mushrooms are consumed as a delicacy for their texture and flavour, but also for their nutritional properties that makes them even more attractable (Heleno S. 2015. In this paper data were collected from several scientific studies with the aim to characterize the chemical composition and content of bioactive compounds of various mushrooms species: Agaricus bisporus, Boletus edulis, Cantharellus cibarius, Pleurotus ostreatus, Lactarius piperatus. The chemical composition of 5 wild edible studied mushrooms, including moisture, ash, total carbohydrates, total sugars, crude fat, crude protein and energy were determined according to AOAC procedures.

Crude oil degradation by Bacillus and Micrococcus species isolated ...

African Journals Online (AJOL)

Microorganisms capable of degrading crude oil were isolated from soil compost in Kano, northwestern Nigeria. The work was carried out with the aim of determining crude-oil biodegradation potentials of Bacillus and Micrococcus species isolated from the soil compost as well as the assessment of the applicability of ...

Comparative ovulation in clariidae using crude HCG from early ...

African Journals Online (AJOL)

This paper used purified crude HCG from early pregnancy urine to assay ovulation in three species of Clariidae. Purification and extraction of crude HCG was carried out by the techniques involving alcohol precipitation, ion exchange chromatography and gel filtration. Biological activity of the purified homogenate was tested ...

Characterization of chemical elements in soil submitted to different systems use and management by energy dispersive x-ray fluorescence spectrometry (EDXRF)

International Nuclear Information System (INIS)

Wastowski, Arci Dirceu; Rosa, Genesio Mario da; Cherubin, Mauricio Roberto; Rigon, Joao Paulo Gonsiorkiewicz

2010-01-01

This study aimed to evaluate the chemical elements levels in soil, submitted to different management systems and use by the Energy Dispersive X-Ray Fluorescence Spectrometry - EDXRF. The systems were T1 - agroforestry (SAF), T2 - native field (CN), T3 - native forest (NM), T4 - tillage forest (PF); T5 - conventional tillage system (SPC) and T6 - system tillage (NT). Samples were collected at 0-10 and 10-20 cm, dried and ground for analysis in EDX-720. The soil showed no difference in the average concentrations of chemical elements analyzed in the profiles, but the systems presented different concentrations of metal elements, and T3 had the highest K, Ca and Zn at 0-10 cm and higher contents of K, Ca, Cu, Zn and Mn in the layer of 10-20 cm. (author)

Exploring crude oil production and export capacity of the OPEC Middle East countries

International Nuclear Information System (INIS)

Matsumoto, Ken'ichi; Voudouris, Vlasios; Stasinopoulos, Dimitrios; Rigby, Robert; Di Maio, Carlo

2012-01-01

As the world economy highly depends on crude oil, it is important to understand the dynamics of crude oil production and export capacity of major oil-exporting countries. Since crude oil resources are predominately located in the OPEC Middle East, these countries are expected to have significant leverage in the world crude oil markets by taking into account a range of uncertainties. In this study, we develop a scenario for crude oil export and production using the ACEGES model considering uncertainties in the resource limits, demand growth, production growth, and peak/decline point. The results indicate that the country-specific peak of both crude oil export and production comes in the early this century in the OPEC Middle East countries. On the other hand, they occupy most of the world export and production before and after the peak points. Consequently, these countries are expected to be the key group in the world crude oil markets. We also find that the gap between the world crude oil demand and production broadens over time, meaning that the acceleration of the development of ultra-deep-water oil, oil sands, and extra-heavy oil will be required if the world continuous to heavily rely on oil products. - Highlights: ► We simulate the future scenario of crude oil export and production using ACEGES. ► The simulated results are analyzed using the GAMLSS framework. ► The peak points of oil export and production will come early in this century. ► The OPCE Middle East will produce most of the world crude oil in the near future. ► These countries will continuously be the key players in the crude oil markets.

Western Canadian crude oil supply and markets 2002-2010 : Executive summary

International Nuclear Information System (INIS)

2003-08-01

The forecast of crude supply developed by the Canadian Association of Petroleum Producers (CAPP) indicates that additional pipeline capacity from western Canada to existing new markets will be required. A crude market study was undertaken to investigate and assess the potential development of the North American crude markets along with expected western Canadian crude supply growth. The results revealed that additional crude export capacity from Alberta will be required by 2006 or 2007. An analysis of three export pipeline scenarios was carried out: (1) Hardisty to Chicago, with a further extension to Cushing, Oklahoma, (2) Edmonton to the west coast of British Columbia, Prince Rupert, and (3) Hardisty to California. The most attractive aggregate benefits to heavy crude producers would result from a western export pipeline to British Columbia or California. A superior alternative is a pipeline to a deepwater tanker terminal on the coast of British Columbia. The Chicago pipeline option would become more attractive if Midwestern refiners were to expand their capacity to process heavy oil. Declining netbacks associated with sustained growth that is introduced into the market place are reflected in all scenarios over the forecast period until 2010. 1 tab., 23 figs

Volatility spillovers in China’s crude oil, corn and fuel ethanol markets

International Nuclear Information System (INIS)

Haixia, Wu; Shiping, Li

2013-01-01

Price volatility spillovers among China’s crude oil, corn and fuel ethanol markets are analyzed based on weekly price data from September 5, 2003 to August 31, 2012, employing the univariate EGARCH model and the BEKK-MVGARCH model, respectively. The empirical results indicate a higher interaction among crude oil, corn and fuel ethanol markets after September, 2008. In the overall sample period, the results simultaneously provide strong evidence that there exist unidirectional spillover effects from the crude oil market to the corn and fuel ethanol markets, and double-directional spillovers between the corn market and the fuel ethanol market. However, the spillover effects from the corn and fuel ethanol markets to the crude oil market are not significant. -- Highlights: •Employing univariate EGARCH model and BEKK-MVGARCH model, respectively. Unidirectional spillover effects from crude oil market to corn and fuel ethanol markets. •Double-directional spillovers between corn market and fuel ethanol market. •The spillover effects from corn and fuel ethanol markets to crude oil market are not significant. •The empirical results indicate a higher interaction among crude oil, corn and fuel ethanol markets after September, 2008

Some Neuropharmacological Effects of the Crude Venom Extract of ...

African Journals Online (AJOL)

This study reports some neuropharmacological effects of the crude venom extract of Conus musicus (family Conidae) in mice using various experimental models. The crude venom was found to significantly increase tail flick reaction time in mice. The effects of the venom on the central nervous system were studied by ...

Biochemical and phyto chemical analysis of dipterygium glaucum collected from Cholistan desert

International Nuclear Information System (INIS)

Mehmood, K.; Mehmood, S.; Ramzan, M.

2010-01-01

The present study evaluates the Biochemical and phyto chemical analysis of Dipterygium Glaucum from Cholistan desert. Ash contents, carbohydrates, crude fibers, crude fats, were carried out along with the estimation of minerals. Determination of biochemical constituents indicate the presence of total carbohydrates 0.156% (0.174 reducing sugars and O.041 % non reducing),starch contents 0.053%, crude fibers 26.83%, crude fats 13.30% and nitrogen contents 0.0 14%. Concentration of sodium was 3.3%,Potassium 37.6%, lithium 0.1 %, Calcium 0.01 %, Magnesium 0.022%, nickel 0.764%, copper 2.372%, manganese 0.003%, sulphur 0.8%, Phosphorous 1.60%. Moisture and ash contents were 5.60% and 4.75% respectively. alkaloids, glycoside, cardiac glycoside, bound anthraquinones and saponins were present while flavonoids and unbound anthraquinones were absent. no anti bacterial activity was found in this plant extract. (author)

Natural gas, NGL's and crude: supply, demand and price forecasts

International Nuclear Information System (INIS)

Stauft, T.L.

2003-01-01

This paper presents an overview of the major issues to watch in the crude oil, natural gas, and natural gas liquids (NGL) markets in North America. The presentation began with background information concerning Purvin and Gertz, an employee-owned consulting firm whose employees are chemical engineers, holders of a Master of Business Administration (MBA), or economists. They specialize in providing strategic, commercial, and technical advice to the international energy industry. A closer look at each individual market was provided, looking at demand, supply, price drivers and others. The author concluded that world oil prices continue to be influenced by a war premium. Oil prices support natural gas, as well as the possibility of a supply issue. The gas processing margins have remained strong. The unknown quantities are the weather and economic recovery. figs

Manihot esculenta crantz in crude oil contaminated soil amended ...

African Journals Online (AJOL)

Studies on the performance of Manihot esculenta, Crantz (TMS 30572) in a crude oil polluted soil was investigated in the Botanic Garden of University of Port Harcourt. The soil samples were polluted at four different levels (0%, 2%, 4% and 6%) with crude oil and amended with organic supplement (decomposed Centrosem ...

Effect of Bawang Dayak (Eleutherine palmifolia (L) Merr) crude extract towards bacteria inhibition zone and carp (Cyprinus carpio) hematology

Science.gov (United States)

Maftuch

2017-05-01