WorldWideScience

Sample records for chemical tests

  1. Chemical compatibility screening test results

    International Nuclear Information System (INIS)

    A program for evaluating packaging components that may be used in transporting mixed-waste forms has been developed and the first phase has been completed. This effort involved the screening of ten plastic materials in four simulant mixed-waste types. These plastics were butadiene-acrylonitrile copolymer rubber, cross-linked polyethylene (XLPE), epichlorohydrin rubber, ethylene-propylene rubber (EPDM), fluorocarbon (Viton or Kel-F), polytetrafluoroethylene, high-density polyethylene (HDPE), isobutylene-isoprene copolymer rubber (butyl), polypropylene, and styrene-butadiene rubber (SBR). The selected simulant mixed wastes were (1) an aqueous alkaline mixture of sodium nitrate and sodium nitrite; (2) a chlorinated hydrocarbon mixture; (3) a simulant liquid scintillation fluid; and (4) a mixture of ketones. The testing protocol involved exposing the respective materials to 286,000 rads of gamma radiation followed by 14-day exposures to the waste types at 60 degrees C. The seal materials were tested using vapor transport rate (VTR) measurements while the liner materials were tested using specific gravity as a metric. For these tests, a screening criterion of 0.9 g/hr/m2 for VTR and a specific gravity change of 10% was used. Based on this work, it was concluded that while all seal materials passed exposure to the aqueous simulant mixed waste, EPDM and SBR had the lowest VTRs. In the chlorinated hydrocarbon simulant mixed waste, only Viton passed the screening tests. In both the simulant scintillation fluid mixed waste and the ketone mixture simulant mixed waste, none of the seal materials met the screening criteria. For specific gravity testing of liner materials, the data showed that while all materials with the exception of polypropylene passed the screening criteria, Kel-F, HDPE, and XLPE offered the greatest resistance to the combination of radiation and chemicals

  2. Testing and evaluation of eight decontamination chemicals

    International Nuclear Information System (INIS)

    This report covers experimental work comparing eight different decontamination chemicals. Seven of these chemicals have some novelty, or are not currently in use at the ICPP. The eighth is a common ICPP decontamination reagent used as a baseline for effective comparison. Decontamination factors, waste generation values, and corrosion rates are tabulated for these chemicals. Recommendations are given for effective methods of non-sodium or low-sodium decontamination chemicals. The two most effective chemical for decontamination found in these test were a dilute hydrofluoric and nitric acid (HF/HNO3) mixture and a fluoroboric acid solution. The fluoroboric acid solution (1 molar) was by far the most effective decontamination reagent, but suffered the problem of generating significant final calcine volume. The HF/HNO3 solution performed a very good decontamination of the SIMCON coupons while generating only small amounts of calcine volume. Concentration variables were also tested, and optimized for these two solutions. Several oxidation/reduction decon chemical systems were also tested. These systems were similar to the TURCO 4502 and TURCO 4521 solutions used for general decontamination at the ICPP. A low sodium alternative, nitric acid/potassium permanganate, to the ''high sodium'' TURCO 4502 was tested extensively, optimized and recommended for general ICPP use. A reductive chemical solution, oxalic acid/nitric acid was also shown to have significant advantages

  3. Chemical Compatibility Testing Final Report Including Test Plans and Procedures

    International Nuclear Information System (INIS)

    This report provides an independent assessment of information on mixed waste streams, chemical compatibility information on polymers, and standard test methods for polymer properties. It includes a technology review of mixed low-level waste (LLW) streams and material compatibilities, validation for the plan to test the compatibility of simulated mixed wastes with potential seal and liner materials, and the test plan itself. Potential packaging materials were reviewed and evaluated for compatibility with expected hazardous wastes. The chemical and physical property measurements required for testing container materials were determined. Test methodologies for evaluating compatibility were collected and reviewed for applicability. A test plan to meet US Department of Energy and Environmental Protection Agency requirements was developed. The expected wastes were compared with the chemical resistances of polymers, the top-ranking polymers were selected for testing, and the most applicable test methods for candidate seal and liner materials were determined. Five recommended solutions to simulate mixed LLW streams are described. The test plan includes descriptions of test materials, test procedures, data collection protocols, safety and environmental considerations, and quality assurance procedures. The recommended order of testing to be conducted is specified

  4. Chemical sensing underclothing system for testing PPE

    International Nuclear Information System (INIS)

    Personal protective equipment (PPE) when worn is subjected to pressure differentials across the garment due to ambient wind flow, by body movement and breathing creating the bellows effect, which may force hazardous chemicals vapor or aerosol through the closures, joints, outlet valves and/or clothing protective fabric. Thus the design, fit, size or improper donning of the protective garment will influence chemical-agent penetration. In order to determine penetration of chemical-protective garments by chemical vapor or aerosol, it is necessary to test the entire suit system, including seams, closures, outlet valves and areas of transition with other protective equipment, that is, at the ankles, waist, wrists, neck etc. In order to identify penetration of chemical vapor or aerosol through protective assembly, the Man-in-Simulant Test (MIST) with passive adsorptive devices (PADs) is used, when adsorbed challenging agent (simulant) is desorbed from the PAD and quantified. The current MIST method is failing in complexity of leak detection, due to limited number of passive collection points fixed on human body or a mannequin and very labor extensive work associated with allocation of 20-40 PADs and quantification of adsorbed agent. The Czech approach to detect and quantify penetration/permeation of chemical agent is based on chemical sensing underclothing enable to change the color when exposed with simulant or even with real CW agent. Color intensity and shape of stains on sensing fabric are processed with Laboratory Universal Computer Image Analysis (LUCIA) allowing determining the quantity and the allocation of the penetrating noxious agent(s). This method allows for example calculate individual doses of exposure, the breakthrough coefficient of protective garment as whole and uniquely precise allocation of penetration/permeation shortfalls. Presentation is providing detailed description of imaging system with nickname 'LUCY' in combination with testing mannequin

  5. Chemical reactivity test for thermal stability

    Energy Technology Data Exchange (ETDEWEB)

    Prokosch, D.W.; Garcia, F.

    1994-07-01

    Lawrence Livermore National Laboratory (LLNL) has developed a thermal stability test procedure that is currently being evaluated by the Department of Defense (DOD) Explosives Safety Board as an equivalent alternate test to the DOD Technical Bulletin 700-2 {open_quotes}Thermal Stability Test at 75{degrees}C{close_quotes}. The LLNL Chemical Reactivity Test (CRT) is significantly more severe than the existing {open_quotes}Thermal Stability Test at 75{degrees}C{close_quotes} and is also quantitative in nature. It has been approved by the Department of Energy (DOE) Explosives Safety Committee as an equivalent alternate thermal stability test and has been in use by LLNL for over 30 years. It is currently used by other DOE and DOD organizations as the standard small-scale safety test for determining thermal stability and material compatibility. The LLNL CRT is run on a 0.250 gm sample for 22 hours at 120{degrees}C rather than the 50 gm sample for 48 hours at 75{degrees}C as required for the Thermal Stability Test. Thus the CRT is a much more severe test since it is run at 120{degrees}C rather than 75{degrees}C. Simple Arrhenius kinetics predict a material decomposition rate of approximately 25 times greater at 120{degrees}C than at 75{degrees}C. Any material under test that exhibits gas evolution exceeding 4 cc/gm (approximately 0.8 % decomposition) is considered suspect and additional testing and/or evaluation is then performed to determine if the material is thermally unstable. In addition to the CRT being significantly more severe and quantitative, there are significant other advantages for using the CRT. These include: (1) the increased safety afforded to operating personnel and equipment by using a fraction of the test material, (2) the cost savings associated with reduced sample heating time and the use of less sample material, and (3) the reduced amount of post-test waste produced.

  6. 46 CFR 4.03-7 - Chemical test.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Chemical test. 4.03-7 Section 4.03-7 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PROCEDURES APPLICABLE TO THE PUBLIC MARINE CASUALTIES AND INVESTIGATIONS Definitions § 4.03-7 Chemical test. The term chemical test means a scientifically recognized...

  7. Chemical cleaning specification: few tube test model

    International Nuclear Information System (INIS)

    The specification is for the waterside chemical cleaning of the 2 1/4 Cr - 1 Mo steel steam generator tubes. It describes the reagents and conditions for post-chemical cleaning passivation of the evaporator tubes

  8. Results of Section 4 Chemical Testing

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Toxic Substances Control Act (TSCA) requires that data be developed on the effect of chemical substances and mixtures on health and the environment. This data...

  9. Testing Turing’s theory of morphogenesis in chemical cells

    Science.gov (United States)

    Tompkins, Nathan; Li, Ning; Girabawe, Camille; Heymann, Michael; Ermentrout, G. Bard; Epstein, Irving R.; Fraden, Seth

    2014-01-01

    Alan Turing, in “The Chemical Basis of Morphogenesis” [Turing AM (1952) Philos Trans R Soc Lond 237(641):37–72], described how, in circular arrays of identical biological cells, diffusion can interact with chemical reactions to generate up to six periodic spatiotemporal chemical structures. Turing proposed that one of these structures, a stationary pattern with a chemically determined wavelength, is responsible for differentiation. We quantitatively test Turing’s ideas in a cellular chemical system consisting of an emulsion of aqueous droplets containing the Belousov–Zhabotinsky oscillatory chemical reactants, dispersed in oil, and demonstrate that reaction-diffusion processes lead to chemical differentiation, which drives physical morphogenesis in chemical cells. We observe five of the six structures predicted by Turing. In 2D hexagonal arrays, a seventh structure emerges, incompatible with Turing’s original model, which we explain by modifying the theory to include heterogeneity. PMID:24616508

  10. OECD Guidelines for the Testing of Chemicals, Test No. 232: Collembolan Reproduction Test in Soil

    DEFF Research Database (Denmark)

    Krogh, Paul Henning; Scott-Fordsmand, Janeck James; Ahtianen, Jukka; Tyle, Henrik; Amorim, Mónica João de Barros; Andrés, Pilar; Bakonyi, Gabor; Becker van Slooten, Kristin; Domene, Xavier; Geujin, Ine; Kaneko, Nobuhiro; Knäbe, Silvio; Kocí, Vladimír; Lana, Jan; Moser, Thomas; Princz, Juliska; Schaefer, Maike; Stubberud, Hege; Wilke, Berndt-Michael

    2009-01-01

    This Test Guideline is designed for assessing the effects of chemicals on the reproduction of collembolans in soil. The parthenogenetic Folsomia candida is the recommended species for use, but an alternative species such as sexually reproducing Folsomia fimetaria could also be used if they meet t...

  11. Integrated chemical effects test program for PWR sump performance assessment

    International Nuclear Information System (INIS)

    Products attributable to chemical interactions between the emergency core cooling system (ECCS) containment spray water and exposed materials (such as metal surfaces, paint chips, and fiberglass insulation debris) could impede the performance of ECCS recirculation following a loss-of-coolant accident (LOCA) at a pressurized-water reactor (PWR). Five tests have been conducted in the ICET (Integrated Chemical Effects Test) test loop in order to simulate the chemical environment present inside a PWR containment water pool following a LOCA. The tests were conducted for 30 days at a constant temperature of 60 Celsius degrees. The materials tested within this environment included representative amounts of submerged and un-submerged aluminum, copper, concrete, zinc, carbon steel, and insulation samples (either 100% fiberglass or a combination of 80% calcium-silicate and 20% fiberglass by volume). Representative amounts of concrete dust and latent debris were also added to the test solution. Water was circulated through the bottom portion of the test tank during the entire test to achieve representative flow rates over the submerged specimens. Overall, the ICET program provided some insights and initial understanding regarding solution chemistry, as well as the types and amounts of chemical reaction products that may form in the ECCS containment sump pool. The observed chemical products may potentially contribute to pressure losses across a debris-laden sump screen, as well as performance degradation of ECCS components downstream of the sump screen. The ICET results indicate that: -1) chemical reaction products with varied quantities, consistencies, attributes, and apparent formation mechanisms were found; -2) containment materials (metallic, non-metallic, and insulation debris), pH, buffering agent, temperature, and time are all important variables that influence chemical product formation; and -3) changes to one important environmental variable (e.g., pH adjusting agent

  12. Invertebrates in testing of environmental chemicals: are they alternatives?

    OpenAIRE

    Lagadic, L.; Caquet, T.

    1998-01-01

    An enlarged interpretation of alternatives in toxicology testing includes the replacement of one animal species with another, preferably a nonmammalian species. This paper reviews the potential of invertebrates in testing environmental chemicals and provides evidence of their usefulness in alternative testing methodologies. The first part of this review addresses the use of invertebrates in laboratory toxicology testing. Problems in extrapolating results obtained in invertebrates to those obt...

  13. 76 FR 65385 - Testing of Certain High Production Volume Chemicals; Third Group of Chemicals

    Science.gov (United States)

    2011-10-21

    ... hazard information on HPV chemical substances in use worldwide, including some of those on the 1990 U.S... hazards associated with chemical substances in their environment. Everyone--including industry..., industry, and others, to support adequate risk assessments. EPA uses data from TSCA section 4 test rules...

  14. Evaluation of methods to test chemicals suitability for umbilical applications

    Energy Technology Data Exchange (ETDEWEB)

    Allenson, S. J.; Lindeman, O. E.; Cenegy, L. M.

    2006-03-15

    Offshore deep-water projects are increasingly deploying chemicals to sub-sea wellheads through umbilical lines. There is no margin for error in umbilical chemical treatment programs since any flow blockage in a sub-sea line would result in a multi-million dollar problem. Chemicals for umbilical delivery must also meet strict requirements in their performance and especially their handling properties. Umbilical delivery must be effective at low concentrations in preventing corrosion, scale, hydrates, asphaltenes, paraffin and a host of other problems. Chemical transiting an umbilical can experience pressures as high as 15,000 psi and temperatures ranging from near 0 deg C to greater than 120 deg C. Since some umbilicals are as long as 80 km, a week or more can elapse from the time the chemical is injected at the platform until it reaches the sub-sea well. Therefore, the chemical must not only be stable under all temperature and pressure conditions that it may experience in the umbilical line, it must also be stable under these conditions for a long period of time. Since many umbilical lines actually terminate into sub-sea valves and connectors that are only a few hundred microns in diameter, it is critical that the injected chemical have a low viscosity at sub-sea temperatures and pressures and that it be completely free of particles. These issues present substantial challenges in formulating and manufacturing chemicals for umbilical applications that must be addressed prior to approval of a product for use. Each of these challenges was taken into consideration and a series of tests were developed to assure reliable chemical pump ability through an umbilical line. The tests developed included enhanced formulation stability tests under umbilical temperature and pressure conditions, NAS Class rating, extensive material compatibility testing to include all metals and elastomers that may be used in umbilical injection systems and comprehensive physical property testing

  15. The National Toxicology Program chemical nomination selection and testing process.

    Science.gov (United States)

    Heindel, J J

    1988-01-01

    The NTP is an interagency program of the Federal Government which coordinates toxicological programs at the NIH (NIEHS), FDA (NCTR), and CDC (NIOSH) with input from NCI, NIH, OSHA, CPSC, EPA, and ATSDR. The NTP has the capability to completely characterize the toxicologic profile of a chemical, including studies of chemical disposition, genetic toxicity, immunotoxicity, teratology, reproductive toxicity, carcinogenicity, neurotoxicity, and specific organ toxicity. The NTP encourages nominations of chemicals of human health concern from all sectors of the public, including industry, labor, and the general public. The specific process of nomination, evaluation, and selection of chemicals for testing by the NTP is described. It is a multicomponent system with several evaluations and a public peer review step to assure adequate consideration of all nominated chemicals. The results of NTP studies are all peer reviewed and available to the general public as well as to the scientific community. PMID:2980357

  16. The TSCA interagency testing committee`s approaches to screening and scoring chemicals and chemical groups: 1977-1983

    Energy Technology Data Exchange (ETDEWEB)

    Walker, J.D. [Environmental Protection Agency, Washington, DC (United States)

    1990-12-31

    This paper describes the TSCA interagency testing committee`s (ITC) approaches to screening and scoring chemicals and chemical groups between 1977 and 1983. During this time the ITC conducted five scoring exercises to select chemicals and chemical groups for detailed review and to determine which of these chemicals and chemical groups should be added to the TSCA Section 4(e) Priority Testing List. 29 refs., 1 fig., 2 tabs.

  17. Engineered Barrier Systems Thermal-Hydraulic-Chemical Column Test Report

    Energy Technology Data Exchange (ETDEWEB)

    W.E. Lowry

    2001-12-13

    The Engineered Barrier System (EBS) Thermal-Hydraulic-Chemical (THC) Column Tests provide data needed for model validation. The EBS Degradation, Flow, and Transport Process Modeling Report (PMR) will be based on supporting models for in-drift THC coupled processes, and the in-drift physical and chemical environment. These models describe the complex chemical interaction of EBS materials, including granular materials, with the thermal and hydrologic conditions that will be present in the repository emplacement drifts. Of particular interest are the coupled processes that result in mineral and salt dissolution/precipitation in the EBS environment. Test data are needed for thermal, hydrologic, and geochemical model validation and to support selection of introduced materials (CRWMS M&O 1999c). These column tests evaluated granular crushed tuff as potential invert ballast or backfill material, under accelerated thermal and hydrologic environments. The objectives of the THC column testing are to: (1) Characterize THC coupled processes that could affect performance of EBS components, particularly the magnitude of permeability reduction (increases or decreases), the nature of minerals produced, and chemical fractionation (i.e., concentrative separation of salts and minerals due to boiling-point elevation). (2) Generate data for validating THC predictive models that will support the EBS Degradation, Flow, and Transport PMR, Rev. 01.

  18. Engineered Barrier System Thermal-Hydraulic-Chemical Column Test Report

    International Nuclear Information System (INIS)

    The Engineered Barrier System (EBS) Thermal-Hydraulic-Chemical (THC) Column Tests provide data needed for model validation. The EBS Degradation, Flow, and Transport Process Modeling Report (PMR) will be based on supporting models for in-drift THC coupled processes, and the in-drift physical and chemical environment. These models describe the complex chemical interaction of EBS materials, including granular materials, with the thermal and hydrologic conditions that will be present in the repository emplacement drifts. Of particular interest are the coupled processes that result in mineral and salt dissolution/precipitation in the EBS environment. Test data are needed for thermal, hydrologic, and geochemical model validation and to support selection of introduced materials (CRWMS M and O 1999c). These column tests evaluated granular crushed tuff as potential invert ballast or backfill material, under accelerated thermal and hydrologic environments. The objectives of the THC column testing are to: (1) Characterize THC coupled processes that could affect performance of EBS components, particularly the magnitude of permeability reduction (increases or decreases), the nature of minerals produced, and chemical fractionation (i.e., concentrative separation of salts and minerals due to boiling-point elevation). (2) Generate data for validating THC predictive models that will support the EBS Degradation, Flow, and Transport PMR, Rev. 01

  19. 78 FR 69414 - Toxic Substances Control Act Chemical Testing; Receipt of Test Data

    Science.gov (United States)

    2013-11-19

    ... October 21, 2011 (76 FR 65385) (FRL-8885-5) (docket ID number EPA-HQ-OPPT-2009-0112). The table in this... AGENCY Toxic Substances Control Act Chemical Testing; Receipt of Test Data AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: This notice announces EPA's receipt of test data on...

  20. 76 FR 38170 - Toxic Substances Control Act Chemical Testing; Receipt of Test Data

    Science.gov (United States)

    2011-06-29

    ... issue of March 16, 2006 (71 FR 13708) (FRL-7335-2). Section 4(d) of TSCA (15 U.S.C. 2603(d)) requires... AGENCY Toxic Substances Control Act Chemical Testing; Receipt of Test Data AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: This notice announces EPA's receipt of test data on...

  1. PWR sump screen chemical effect test in FY 2007

    International Nuclear Information System (INIS)

    Corrosion, pressure drop and integrated chemical effect assessment on NPSH (ICAN) test of insulations used in Japanese nuclear power plants were performed in FY 2007. In order to obtain basic data needed for taking into consideration of results of ICAN test, corrosion test was taken in sodium tetraborate (insulation) solution, hydrazine solution and pure water added with hydrochronic acid solution of BWR condition. Concentration of dissolved element of rock wool insulation became higher with increase of PH value while that of calcium sulfate insulation became lower with increase of PH value and showed highest PH value in hydrochronic acid solution, which increased up to 9.2 in 3 hrs after the start of experiment. Pressure drop test was to investigate effects of debris (accumulation of sump screen) state and colloid simulating corrosion products on pressure drop. Colloid particulates were apt to increase pressure drop compared with calcium sulfate. Iron hydroxide and aluminum hydroxide increased pressure drop more than copper oxide. Test using sodium tetraborate as PH control chemical was apt to increase pressure drop while test using hydrazine was difficult to increase. Test using ICAN test solution showed wet glass wool insulation increased pressure drop in short time. ICAN test under PWR containment vessel simulated condition was also performed in sodium tetraborate solution, hydrazine solution and pure water added with hydrochronic acid solution BWR condition. Solubility of aluminum, silicon, iron and copper could be almost calculated from thermodynamics data of each element's oxide or hydroxide. Pressure drop change was so complicated as to reflect respective experimental condition. (T. Tanaka)

  2. Dexterity testing of chemical-defense gloves. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    Robinette, K.M.; Ervin; Zehner, G.F.

    1986-05-01

    Chemical-defense gloves (12.5-mil Epichlorohydron/Butyl, 14-mil Epichlorohydron/Butyl, and 7-mil Butyl with Nomex overgloves) were subjected to four dexterity tests (O'Connor Finger Dexterity Test, Pennsylvania Bi-Manual Worksample-Assembly, Minnesota Rate of Manipulation Turning, and the Crawford Small Test). Results indicated that subjects performances were most impaired by the 7-mil Butyl with Nomex overglove. Though differences between the other three gloved conditions were not always statistically significant, subjects performed silghtly better while wearing the Epichlorohydron/Butyl gloves, no matter which thickness, than they did while wearing the 15-mil butyl gloves. High negative correlation between anthropometry and gloved tests scores of subjects suggested that poor glove fit may also have affected subjects performances.

  3. 76 FR 38169 - Toxic Substances Control Act Chemical Testing; Receipt of Test Data

    Science.gov (United States)

    2011-06-29

    ... FR 22402) (FRL-7312-2), and later amended by a final rule titled ``Revocation of TSCA Section 4... 12, 2006 (71 FR 18650) (FRL-7751-7). Section 4(d) of TSCA (15 U.S.C. 2603(d)) requires EPA to publish... AGENCY Toxic Substances Control Act Chemical Testing; Receipt of Test Data AGENCY:...

  4. Temperature buffer test. Hydro-mechanical and chemical/ mineralogical characterizations

    International Nuclear Information System (INIS)

    The Temperature Buffer Test (TBT) is a joint project between SKB/ANDRA and supported by ENRESA (modeling) and DBE (instrumentation), which aims at improving the understanding and to model the thermo-hydro-mechanical behavior of buffers made of swelling clay submitted to high temperatures (over 100 deg C) during the water saturation process. The test has been carried out in a KBS-3 deposition hole at Aspo HRL. It was installed during the spring of 2003. Two steel heaters (3 m long, 0.6 m diameter) and two buffer arrangements have been investigated: the lower heater was surrounded by rings of compacted Wyoming bentonite only, whereas the upper heater was surrounded by a composite barrier, with a sand shield between the heater and the bentonite. The test was dismantled and sampled during the winter of 2009/2010. This report presents the hydro-mechanical and chemical/mineralogical characterization program which was launched subsequent to the dismantling operation. The main goal has been to investigate if any significant differences could be observed between material from the field experiment and the reference material. The field samples were mainly taken from Ring 4 (located at the mid-section around the lower heater), in which the temperature in the innermost part reached 155 deg C. The following hydro-mechanical properties have been determined for the material (test technique within brackets): hydraulic conductivity (swelling pressure device), swelling pressure (swelling pressure device), unconfined compression strength (mechanical press), shear strength (triaxial cell) and retention properties (jar method). The following chemical/mineralogical properties (methods within brackets) were determined: anion analysis of water leachates (IC), chemical composition (ICP/AES+MS, EGA), cation exchange capacity (CEC, Cu-trien method) and exchangeable cations (exchange with NH4, ICPAES), mineralogical composition (XRD and FTIR), element distribution and microstructure (SEM and

  5. Chemical products toxicological tests performed on lake and river fish

    International Nuclear Information System (INIS)

    The volume and toxical values of industrial and urban effluents are growing higher and therefore acute or chronic pollution hazard is proportionally increased. Hence it is necessary to determine the effluent components minimum lethal dose for fish (one hour or six hours according to applicable standards). The following tests are described in this report: toxicity of some chemical products, tested individually (sodium, sulphate, sodium chloride, sodium fluoride, etc...); toxicity of some metal ions (Al3+, Fe++, Fe3+, Pb++, etc...); toxicity of certain mixed compounds for various fish species (sun perch, tench, gold fish, roach, gudgeon, bleak). The test results obtained represent local values and may be used for reference and as a general basis for other investigation and calculation of the effluents data when released. (author)

  6. Optimizing cyanobacteria growth conditions in a sealed environment to enable chemical inhibition tests with volatile chemicals.

    Science.gov (United States)

    Johnson, Tylor J; Zahler, Jacob D; Baldwin, Emily L; Zhou, Ruanbao; Gibbons, William R

    2016-07-01

    Cyanobacteria are currently being engineered to photosynthetically produce next-generation biofuels and high-value chemicals. Many of these chemicals are highly toxic to cyanobacteria, thus strains with increased tolerance need to be developed. The volatility of these chemicals may necessitate that experiments be conducted in a sealed environment to maintain chemical concentrations. Therefore, carbon sources such as NaHCO3 must be used for supporting cyanobacterial growth instead of CO2 sparging. The primary goal of this study was to determine the optimal initial concentration of NaHCO3 for use in growth trials, as well as if daily supplementation of NaHCO3 would allow for increased growth. The secondary goal was to determine the most accurate method to assess growth of Anabaena sp. PCC 7120 in a sealed environment with low biomass titers and small sample volumes. An initial concentration of 0.5g/L NaHCO3 was found to be optimal for cyanobacteria growth, and fed-batch additions of NaHCO3 marginally improved growth. A separate study determined that a sealed test tube environment is necessary to maintain stable titers of volatile chemicals in solution. This study also showed that a SYTO® 9 fluorescence-based assay for cell viability was superior for monitoring filamentous cyanobacterial growth compared to absorbance, chlorophyll α (chl a) content, and biomass content due to its accuracy, small sampling size (100μL), and high throughput capabilities. Therefore, in future chemical inhibition trials, it is recommended that 0.5g/L NaHCO3 is used as the carbon source, and that culture viability is monitored via the SYTO® 9 fluorescence-based assay that requires minimum sample size. PMID:27196637

  7. Primary rat hepatocytes in chemical testing and QSAR predictive applicability.

    Science.gov (United States)

    Tichý, Milon; Pokorná, Adéla; Hanzlíková, Iveta; Nerudová, Jana; Tumová, Jana; Uzlová, Rút

    2010-02-01

    Primary rat hepatocytes were used to test acute toxicities of 16 neutral aliphatic alcohols, ketones and esters. Their effects on cell viability and metabolic function (ureogenesis, i.e. biotransformation of ornithine to urea) were measured and expressed as EC50 values. Log EC50 values from both tests correlated with the log partition coefficients for the chemicals between n-octanol and water and log P(ow)-based QSAR models were derived. Log EC50 (viability) tightly correlates with log EC50 (ureogenesis): log EC50 (viability)=0.91 log EC50 (ureogenesis)+0.06. Each of these toxic indices can be substituted by the other one. The toxic indices for both cell viability and metabolic disorder can be estimated using log EC50 for movement inhibition in the oligochaete Tubifex tubifex and the respective QSAR equation. It eliminates a usage of rats. Their correlations were proved and justified. PMID:19735719

  8. Test results of chemical reactivity test (CRT) analysis of structural materials and explosives

    Energy Technology Data Exchange (ETDEWEB)

    Back, P.S.; Barnhart, B.V.; Walters, R.R.; Haws, L.D.; Collins, L.W.

    1980-03-21

    The chemical reactivity test, CRT, is a procedure used to screen the compatibility of component structure materials with explosives. This report contains the results of CRT materials evaluations conducted at Mound Facility. Data about materials combinations are catalogued both under the name of the explosive and the nonexplosive.

  9. Temperature buffer test. Hydro-mechanical and chemical/ mineralogical characterizations

    Energy Technology Data Exchange (ETDEWEB)

    Aakesson, Mattias; Olsson, Siv; Dueck, Ann; Nilsson, Ulf; Karnland, Ola [Clay Technology AB, Lund (Sweden); Kiviranta, Leena; Kumpulainen, Sirpa [BandTech Oy, Helsinki (Finland); Linden, Johan [Aabo Akademi, Aabo (Finland)

    2012-01-15

    The Temperature Buffer Test (TBT) is a joint project between SKB/ANDRA and supported by ENRESA (modeling) and DBE (instrumentation), which aims at improving the understanding and to model the thermo-hydro-mechanical behavior of buffers made of swelling clay submitted to high temperatures (over 100 deg C) during the water saturation process. The test has been carried out in a KBS-3 deposition hole at Aspo HRL. It was installed during the spring of 2003. Two steel heaters (3 m long, 0.6 m diameter) and two buffer arrangements have been investigated: the lower heater was surrounded by rings of compacted Wyoming bentonite only, whereas the upper heater was surrounded by a composite barrier, with a sand shield between the heater and the bentonite. The test was dismantled and sampled during the winter of 2009/2010. This report presents the hydro-mechanical and chemical/mineralogical characterization program which was launched subsequent to the dismantling operation. The main goal has been to investigate if any significant differences could be observed between material from the field experiment and the reference material. The field samples were mainly taken from Ring 4 (located at the mid-section around the lower heater), in which the temperature in the innermost part reached 155 deg C. The following hydro-mechanical properties have been determined for the material (test technique within brackets): hydraulic conductivity (swelling pressure device), swelling pressure (swelling pressure device), unconfined compression strength (mechanical press), shear strength (triaxial cell) and retention properties (jar method). The following chemical/mineralogical properties (methods within brackets) were determined: anion analysis of water leachates (IC), chemical composition (ICP/AES+MS, EGA), cation exchange capacity (CEC, Cu-trien method) and exchangeable cations (exchange with NH4, ICPAES), mineralogical composition (XRD and FTIR), element distribution and microstructure (SEM and

  10. Similarity Analysis of Cable Insulations by Chemical Test

    International Nuclear Information System (INIS)

    As result of this experiment, it was found that FT-IR test for material composition, TGA test for aging trend are applicable for similarity analysis of cable materials. OIT is recommended as option if TGA doesn't show good trend. Qualification of new insulation by EQ report of old insulation should be based on higher activation energy of new insulation than that of old one in the consideration of conservatism. In old nuclear power plant, it is easy to find black cable which has no marking of cable information such as manufacturer, material name and voltage. If a type test is required for qualification of these cables, how could I select representative cable? How could I determine the similarity of these cables? If manufacturer has qualified a cable for nuclear power plant more than a decade ago and composition of cable material is changed with similar one, is it acceptable to use the old EQ report for recently manufactured cable? It is well known to use FT-IR method to determine the similarity of cable materials. Infrared ray is easy tool to compare compositions of each material. But, it is not proper to compare aging trend of these materials. Study for similarity analysis of cable insulation by chemical test is described herein. To study a similarity evaluation method for polymer materials, FT-IR, TGA and OIT tests were performed for two cable insulation(old and new) which were supplied from same manufacturer. FT-IR shows good result to compare material compositions while TGA and OIT show good result to compare aging character of materials

  11. Similarity Analysis of Cable Insulations by Chemical Test

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Seog [Central Research Institute of Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

    2013-10-15

    As result of this experiment, it was found that FT-IR test for material composition, TGA test for aging trend are applicable for similarity analysis of cable materials. OIT is recommended as option if TGA doesn't show good trend. Qualification of new insulation by EQ report of old insulation should be based on higher activation energy of new insulation than that of old one in the consideration of conservatism. In old nuclear power plant, it is easy to find black cable which has no marking of cable information such as manufacturer, material name and voltage. If a type test is required for qualification of these cables, how could I select representative cable? How could I determine the similarity of these cables? If manufacturer has qualified a cable for nuclear power plant more than a decade ago and composition of cable material is changed with similar one, is it acceptable to use the old EQ report for recently manufactured cable? It is well known to use FT-IR method to determine the similarity of cable materials. Infrared ray is easy tool to compare compositions of each material. But, it is not proper to compare aging trend of these materials. Study for similarity analysis of cable insulation by chemical test is described herein. To study a similarity evaluation method for polymer materials, FT-IR, TGA and OIT tests were performed for two cable insulation(old and new) which were supplied from same manufacturer. FT-IR shows good result to compare material compositions while TGA and OIT show good result to compare aging character of materials.

  12. DEVELOPMENT OF HAZARDOUS SLUDGE SIMULANTS FOR ENHANCED CHEMICAL CLEANING TESTS

    Energy Technology Data Exchange (ETDEWEB)

    Eibling, R.

    2010-04-12

    An Enhanced Chemical Cleaning (ECC) process is being developed by Savannah River Remediation (SRR) to aid in Savannah River Site (SRS) High-Level Waste (HLW) tank closure. After bulk waste removal, the ECC process can be used to dissolve and remove much of the remaining sludge from HLW tanks. The ECC process uses dilute oxalic acid (1 wt %) with in-line pH monitoring and control. The resulting oxalate is decomposed through hydroxylation using an Advanced Oxidation Process (AOP). Minimizing the amount of oxalic acid used for dissolution and the subsequent oxidative destruction of oxalic acid will minimize the potential for downstream impacts. Initial efficacy tests by AREVA demonstrated that previous tank heel simulants could be dissolved using dilute oxalic acid. The oxalate could be decomposed by an AOP that utilized ozone and ultraviolet (UV) light, and the resultant metal oxides and hydroxides could be separated out of the process.

  13. Endocrine disrupting chemicals: harmful substances and how to test them

    Directory of Open Access Journals (Sweden)

    Olea-Serrano Nicolás

    2002-01-01

    Full Text Available This paper presents an analysis of the opinions of different groups from: scientists, international regulatory bodies, non-governmental organizations and industry; with an interest in the problem of identifying chemical substances with endocrine disrupting activity. There is also discussion of the consequences that exposure to endocrine disruptors may have for human health, considering concrete issues related to: the estimation of risk; the tests that must be used to detect endocrine disruption; the difficulties to establish an association between dose, time of exposure, individual susceptibility, and effect; and the attempts to create a census of endocrine disruptors. Finally, it is proposed that not all hormonal mimics should be included under the single generic denomination of endocrine disruptors.

  14. Effect of test concentration in the ready biodegradability test for chemical substances: Improvement of OECD test guideline 301C.

    Science.gov (United States)

    Nabeoka, Ryosuke; Taruki, Masanori; Kayashima, Takakazu; Yoshida, Tomohiko; Kameya, Takashi

    2016-01-01

    In Japan, understanding the environmental persistence of chemicals is very important for risk assessment, and ready biodegradability tests are mainly conducted according to the Organisation for Economic Co-operation and Development test guideline 301C. However, the highest test concentration specified in test guideline 301C, 100 mg/L, may cause microbial toxicity and incomplete biodegradation. The authors performed test guideline 301C tests at test concentrations of 30 mg/L for 13 substances that were readily biodegradable in ready biodegradability tests but not in test guideline 301C tests. Of the 5 substances with potential to cause microbial toxicity at 100 mg/L, the percentage of biodegradation of sodium dimethyldithiocarbamate, 4-chloro-3-cresol (CC), thymol (THY), and p-tert-butyl-α-methylbenzenepropionaldehyde measured by biochemical oxygen demand (BOD) increased in the test guideline 301C test at 30 mg/L, suggesting a reduction in toxicity effects. Furthermore, CC and THY met the criteria for ready biodegradability, which are more than 60% of biodegradation by BOD and a 10-d window. Of the 8 substances with a low potential for causing microbial toxicity at 100 mg/L, the percentage of biodegradation of only 2-(diethylamino)ethanol increased in the test guideline 301C test at 30 mg/L. Employing a lower test concentration in the standard test guideline 301C test will contribute to improvement of consistency between results of a test guideline 301C test and other ready biodegradability tests. PMID:26211908

  15. Can water quality of tubewells be assessed without chemical testing?

    Science.gov (United States)

    Hoque, Mohammad A.; Butler, Adrian P.

    2016-04-01

    Arsenic is one of the major pollutants found in aquifers on a global scale. The screening of tubewells for arsenic has helped many people to avoid drinking from highly polluted wells in the Bengal Delta (West Bengal and Bangladesh). However, there are still many millions of tubewells in Bangladesh yet to be tested, and a substantial proportion of these are likely to contain excessive arsenic. Due to the level of poverty and lack of infrastructure, it is unlikely that the rest of the tubewells will be tested quickly. However, water quality assessment without needing a chemical testing may be helpful in this case. Studies have found that qualitative factors, such as staining in the tubewell basement and/or on utensils, can indicate subsurface geology and water quality. The science behind this staining is well established, red staining is associated with iron reduction leading to release of arsenic whilst black staining is associated with manganese reduction (any release of arsenic due to manganese reduction is sorbed back on the, yet to be reduced, iron), whereas mixed staining may indicate overlapping manganese and iron reduction at the tubewell screen. Reduction is not uniform everywhere and hence chemical water quality including dissolved arsenic varies from place to place. This is why coupling existing tubewell arsenic information with user derived staining data could be useful in predicting the arsenic status at a particular site. Using well location, depth, along with colour of staining, an assessment of both good (nutrients) and bad (toxins and pathogens) substances in the tubewell could be provided. Social-network technology, combined with increasing use of smartphones, provides a powerful opportunity for both sharing and providing feedback to the user. Here we outline how a simple digital application can couple the reception both qualitative and quantitative tubewell data into a centralised interactive database and provide manipulated feedback to an

  16. Testing the chemical tagging technique with open clusters

    OpenAIRE

    González Hernández, J. I.; Montes Gutiérrez, David; Tabernero Guzmán, Hugo Martín

    2015-01-01

    Context. Stars are born together from giant molecular clouds and, if we assume that the priors were chemically homogeneous and well-mixed, we expect them to share the same chemical composition. Most of the stellar aggregates are disrupted while orbiting the Galaxy and most of the dynamic information is lost, thus the only possibility of reconstructing the stellar formation history is to analyze the chemical abundances that we observe today. Aims. The chemical tagging technique aims to recover...

  17. Acute toxicity testing of chemicals-Opportunities to avoid redundant testing and use alternative approaches.

    Science.gov (United States)

    Creton, Stuart; Dewhurst, Ian C; Earl, Lesley K; Gehen, Sean C; Guest, Robert L; Hotchkiss, Jon A; Indans, Ian; Woolhiser, Michael R; Billington, Richard

    2010-01-01

    Assessment of the acute systemic oral, dermal, and inhalation toxicities, skin and eye irritancy, and skin sensitisation potential of chemicals is required under regulatory schemes worldwide. In vivo studies conducted to assess these endpoints can sometimes be associated with substantial adverse effects in the test animals, and their use should always be scientifically justified. It has been argued that while information obtained from such acute tests provides data needed to meet classification and labelling regulations, it is of limited value for hazard and risk assessments. Inconsistent application of in vitro replacements, protocol requirements across regions, and bridging principles also contribute to unnecessary and redundant animal testing. Assessment of data from acute oral and dermal toxicity testing demonstrates that acute dermal testing rarely provides value for hazard assessment purposes when an acute oral study has been conducted. Options to waive requirements for acute oral and inhalation toxicity testing should be employed to avoid unnecessary in vivo studies. In vitro irritation models should receive wider adoption and be used to meet regulatory needs. Global requirements for sensitisation testing need continued harmonisation for both substance and mixture assessments. This paper highlights where alternative approaches or elimination of tests can reduce and refine animal use for acute toxicity requirements. PMID:20144136

  18. Testing the chemical tagging technique with open clusters

    CERN Document Server

    Blanco-Cuaresma, S; Heiter, U; Asplund, M; Carraro, G; Costado, M T; Feltzing, S; González-Hernández, J I; Jiménez-Esteban, F; Korn, A J; Marino, A F; Montes, D; Roman, I San; Tabernero, H M; Tautvaišienė, G

    2015-01-01

    Context. Stars are born together from giant molecular clouds and, if we assume that the priors were chemically homogeneous and well-mixed, we expect them to share the same chemical composition. Most of the stellar aggregates are disrupted while orbiting the Galaxy and most of the dynamic information is lost, thus the only possibility of reconstructing the stellar formation history is to analyze the chemical abundances that we observe today. Aims. The chemical tagging technique aims to recover disrupted stellar clusters based merely on their chemical composition. We evaluate the viability of this technique to recover co-natal stars that are no longer gravitationally bound. Methods. Open clusters are co-natal aggregates that have managed to survive together. We compiled stellar spectra from 31 old and intermediate-age open clusters, homogeneously derived atmospheric parameters, and 17 abundance species, and applied machine learning algorithms to group the stars based on their chemical composition. This approach...

  19. Testing the chemical tagging technique with open clusters

    Science.gov (United States)

    Blanco-Cuaresma, S.; Soubiran, C.; Heiter, U.; Asplund, M.; Carraro, G.; Costado, M. T.; Feltzing, S.; González-Hernández, J. I.; Jiménez-Esteban, F.; Korn, A. J.; Marino, A. F.; Montes, D.; San Roman, I.; Tabernero, H. M.; Tautvaišienė, G.

    2015-05-01

    Context. Stars are born together from giant molecular clouds and, if we assume that the priors were chemically homogeneous and well-mixed, we expect them to share the same chemical composition. Most of the stellar aggregates are disrupted while orbiting the Galaxy and most of the dynamic information is lost, thus the only possibility of reconstructing the stellar formation history is to analyze the chemical abundances that we observe today. Aims: The chemical tagging technique aims to recover disrupted stellar clusters based merely on their chemical composition. We evaluate the viability of this technique to recover co-natal stars that are no longer gravitationally bound. Methods: Open clusters are co-natal aggregates that have managed to survive together. We compiled stellar spectra from 31 old and intermediate-age open clusters, homogeneously derived atmospheric parameters, and 17 abundance species, and applied machine learning algorithms to group the stars based on their chemical composition. This approach allows us to evaluate the viability and efficiency of the chemical tagging technique. Results: We found that stars at different evolutionary stages have distinct chemical patterns that may be due to NLTE effects, atomic diffusion, mixing, and biases. When separating stars into dwarfs and giants, we observed that a few open clusters show distinct chemical signatures while the majority show a high degree of overlap. This limits the recovery of co-natal aggregates by applying the chemical tagging technique. Nevertheless, there is room for improvement if more elements are included and models are improved. Based on observations obtained at the Telescope Bernard Lyot (USR5026) operated by the Observatoire Midi-Pyrénées, Université de Toulouse (Paul Sabatier), Centre National de la Recherche Scientifique of France, and on public data obtained from the ESO Science Archive Facility under requests number 81252 and 81618.

  20. Testing Turing's Theory of Morphogenesis in Chemical Cells

    Science.gov (United States)

    Tompkins, Nathan; Li, Ning; Girabawe, Camille; Heymann, Michael; Ermentrout, G. Bard; Epstein, Irving; Fraden, Seth

    2015-03-01

    Alan Turing's 1952 paper ``The Chemical Basis of Morphogenesis'' described how reaction-diffusion dynamics could create six spatiotemporal patterns including a stationary pattern that could lead to physical morphogenesis (which now bears his name). This stationary ``Turing pattern'' has been observed in continuous media of various chemical systems but never in diffusively coupled discrete reactors as Turing theorized. We have created a system of microfluidically produced chemical compartments containing the Belousov-Zhabotinsky reaction that are designed to fulfill the assumptions of Turing's theoretical system. This system demonstrates all six spatiotemporal patterns that Turing predicted. In particular, we observe the stationary case that bears Turing's name where the cells create a pattern of oxidized and reduced states. As Turing predicted, this chemical heterogeneity gives rise to physical heterogeneity by driving an osmotic flow, swelling the reduced cells and shrinking the oxidized cells. In addition to the six patterns and physical morphogenesis predicted by Turing we observe a seventh pattern of mixed stationary/oscillatory states that is not predicted by Turing. This seventh pattern requires modifying Turing's theory to include slight heterogeneity to match experiments.

  1. 40 CFR 799.18 - Chemicals subject of test rules or consent orders for which the testing reimbursement period has...

    Science.gov (United States)

    2010-07-01

    ... action under TSCA section 5, 6, or 7 (in addition to final actions under section 4); see 40 CFR part 707... consent orders for which the testing reimbursement period has passed. 799.18 Section 799.18 Protection of... Chemicals subject of test rules or consent orders for which the testing reimbursement period has passed....

  2. Tensile tests of basalt FRP rebars using chemical anchorages

    OpenAIRE

    Neagoe, Catalin Andrei; Gil Espert, Lluís

    2013-01-01

    In the current report are analyzed the experimental results of initial tensile tests of Basalt FRP (BFRP) rebars provided by VSL. The investigation was conducted in the laboratory of CER LITEM. Objectives of the study: to determine the tensile strengths of 6 mm and 8 mm basalt FRP rebars, and to determine what type of test setup and anchorage system is best suited for future tensile tests of BFRP bars.

  3. [Recent development in animal testing to predict the skin and respiratory sensitizing potential of chemicals].

    Science.gov (United States)

    Aoyama, Kohji

    2010-01-01

    The identification of chemicals with skin and/or respiratory sensitizing potential is important for the prevention of allergic diseases in both living and work environments. Although a number of animal models for respiratory allergic diseases have been reported, none of these models meets the goals of broad assessments of chemical sensitizing potential. We are attempting to develop a test for predicting the respiratory sensitization of chemicals. In the evaluation of skin sensitization of chemicals, the mostly used predictive tests are the guinea pig maximization test, Buehler test, and mouse local lymph node assay (LLNA). However, only LLNA has been validated formally and independently. Recent studies have revealed that EC3 estimated by LLNA correlates well with human skin sensitizing potency and the threshold for the induction of skin sensitization in the human repeat patch test. Thus, LLNA can predict the potency of skin sensitizing potential of a chemical and its risk in humans. PMID:20134104

  4. Acute oral toxicity test of chemical compounds in silkworms.

    Science.gov (United States)

    Usui, Kimihito; Nishida, Satoshi; Sugita, Takuya; Ueki, Takuro; Matsumoto, Yasuhiko; Okumura, Hidenobu; Sekimizu, Kazuhisa

    2016-02-01

    This study performed an acute oral toxicity test of 59 compounds in silkworms. These compounds are listed in OECD guidelines as standard substances for a cytotoxicity test, and median lethal dose (LD(50)) werecalculated for each compound. Acute oral LD(50) values in mammals are listed in OECD guidelines and acute oral LD(50) values in silkworms were determined in this study. R(2) for the correlation between LD(50) values in mammals and LD(50) values in silkworms was 0.66. In addition, the acute oral toxicity test in silkworms was performed by two different facilities, and test results from the facilities were highly reproducible. These findings suggest that an acute oral toxicity test in silkworms is a useful way to evaluate the toxicity of compounds in mammals. PMID:26971557

  5. Testing chemical composition of highest energy comic rays

    Czech Academy of Sciences Publication Activity Database

    Nosek, D.; Vícha, Jakub; Nosková, J.; Ebr, Jan

    Singapore : International Union of Pure and Applied Physics (IUPAP), 2013, s. 0472. ISBN 978-85-89064-29-3. [The 33rd International Cosmic Ray Conference (ICRC2013). Rio de Janeiro (BR), 02.07.2013-09.07.2013] R&D Projects: GA MŠk(CZ) LG13007 Institutional support: RVO:68378271 Keywords : ultra-high energy cosmic rays * chemical composition Subject RIV: BF - Elementary Particles and High Energy Physics http://www.cbpf.br/~icrc2013/proc_icrc2013.html

  6. Chemical Characterization and Reactivity Testing of Fuel-Oxidizer Reaction Product (Test Report)

    Science.gov (United States)

    1996-01-01

    The product of incomplete reaction of monomethylhydrazine (MMH) and nitrogen tetroxide (NTO) propellants, or fuel-oxidizer reaction product (FORP), has been hypothesized as a contributory cause of an anomaly which occurred in the chamber pressure (PC) transducer tube on the Reaction Control Subsystem (RCS) aft thruster 467 on flight STS-51. A small hole was found in the titanium-alloy PC tube at the first bend below the pressure transducer. It was surmised that the hole may have been caused by heat and pressure resulting from ignition of FORP. The NASA Johnson Space Center (JSC) White Sands Test Facility (WSTF) was requested to define the chemical characteristics of FORP, characterize its reactivity, and simulate the events in a controlled environment which may have lead to the Pc-tube failure. Samples of FORP were obtained from the gas-phase reaction of MMH with NTO under laboratory conditions, the pulsed firings of RCS thrusters with modified PC tubes using varied oxidizer or fuel lead times, and the nominal RCS thruster firings at WSTF and Kaiser-Marquardt. Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), accelerating rate calorimetry (ARC), ion chromatography (IC), inductively coupled plasma (ICP) spectrometry, thermogravimetric analysis (TGA) coupled to FTIR (TGA/FTIR), and mechanical impact testing were used to qualitatively and quantitatively characterize the chemical, thermal, and ignition properties of FORP. These studies showed that the composition of FORP is variable but falls within a limited range of compositions that depends on the fuel loxidizer ratio at the time of formation, composition of the post-formation atmosphere (reducing or oxidizing), and reaction or postreaction temperature. A typical composition contains methylhydrazinium nitrate (MMHN), ammonium nitrate (AN), methylammonium nitrate (MAN), and trace amounts of hydrazinium nitrate and 1,1-dimethylhydrazinium nitrate. The thermal decomposition

  7. Aquatic toxicity of forty industrial chemicals: Testing in support of hazardous substance spill prevention regulation

    Science.gov (United States)

    Curtis, M. W.; Ward, C. H.

    1981-05-01

    The U.S. Environmental Protection Agency is presently developing hazardous substance spill regulations to help prevent water pollution. Aquatic animal toxicity data are used as criteria for the designation and categorization of substances as hazardous, even though this type of data is not available for many industrial chemicals. Static 96-hr. toxicity tests were conducted with 40 such chemicals to provide basic toxicity data for regulatory decision making. Thirty-two of the 40 chemicals tested were hazardous to aquatic life as determined by 96-hr. LC 50's less than or equal to 500 mg/l. All 40 chemicals were tested with the fresh-water fathead minnow, Pimephales promelas, and ten chemicals were also tested with the salt-water grass shrimp, Palaemonetes pugio.

  8. Results of routine testing of organic food for agro-chemical residues

    OpenAIRE

    Lo, Ming; Matthews, Dave

    2002-01-01

    This report was presented at the UK Organic Research 2002 Conference. Consumers expect organic foods to be free of agro-chemical residues. Organix Brands plc. routinely test organic food ingredients for agrochemical residues using independent test laboratories. In the past year 243 batches of ingredients were tested and low levels of agro-chemical residues were found in 21% of samples. These residues can arise in organic food through environmental contamination, processing contamination or ev...

  9. Aggressive chemical decontamination tests on small valves from the Garigliano BWR

    International Nuclear Information System (INIS)

    In order to check the effectiveness of direct chemical decontamination on small and complex components, usually considered for storage without decontamination because of the small amount, some tests were performed on the DECO experimental loop. Four small stainless steel valves from the primary system of the Garigliano BWR were decontaminated using mainly aggressive chemicals such as HC1, HF, HNO3 and their mixtures. On two valves, before the treatment with aggressive chemicals, a step with soft chemical (oxalic and citric acid mixture) was performed in order to see whether a softening action enhances the following aggressive decontamination. Moreover, in order to increase as much as possible the decontamination effectiveness, a decontamination process using ultrasounds jointly with aggressive chemicals was investigated. After an intensive laboratory testing programme, two smaller stainless steel valves from the primary system of the Garigliano BWR were decontaminated using ultrasounds in aggressive chemical solutions

  10. Project W-314 Polyurea Special Protective Coating (SPC) Test Plan Chemical Compatibility and Physical Characteristics Testing

    International Nuclear Information System (INIS)

    This Test Plan outlines the testing to be done on the Special Protective Coating (SPC) Polyurea which includes: Tank Waste Compatibility, Decontamination Factor Testing, and Adhesion Strength Testing after a sample has been exposed to Radiation

  11. In Vitro Screening of Environmental Chemicals for Targeted Testing Prioritization: The ToxCast Project

    OpenAIRE

    Judson, Richard S.; Houck, Keith A.; Kavlock, Robert J.; Knudsen, Thomas B,; Martin, Matthew T.; Mortensen, Holly M.; Reif, David M.; Rotroff, Daniel M.; Shah, Imran; Richard, Ann M.; Dix, David J.

    2009-01-01

    Background Chemical toxicity testing is being transformed by advances in biology and computer modeling, concerns over animal use, and the thousands of environmental chemicals lacking toxicity data. The U.S. Environmental Protection Agency’s ToxCast program aims to address these concerns by screening and prioritizing chemicals for potential human toxicity using in vitro assays and in silico approaches. Objectives This project aims to evaluate the use of in vitro assays for understanding the ty...

  12. Recommendations for Developing Alternative Test Methods for Screening and Prioritization of Chemicals for Developmental Neurotoxicity

    Science.gov (United States)

    Developmental neurotoxicity testing (DNT) is perceived by many stakeholders to be an area in critical need of alternative methods to current animal testing protocols and gUidelines. An immediate goal is to develop test methods that are capable of screening large numbers of chemic...

  13. 78 FR 66700 - Toxic Substances Control Act Chemical Testing; Receipt of Test Data

    Science.gov (United States)

    2013-11-06

    ... FR 13708) (FRL-7335-2) (docket identification (ID) number EPA-HQ-OPPT-2005-0033). EPA received data... (76 FR 1067) (FRL-8846-9) (docket ID number EPA-HQ-OPPT-2007-0531). EPA received data on 5 chemicals...; Third Group of Chemicals,'' published in the Federal Register issue of October 21, 2011 (76 FR...

  14. 76 FR 1067 - Testing of Certain High Production Volume Chemicals; Second Group of Chemicals

    Science.gov (United States)

    2011-01-07

    ... (Reapproved 2005)--liquid chromatography) (Ref. 24). Method C (40 CFR 799.6756--generator column). Water... castor oil, oxidized (CASRN 68187-84-8). EPA is also not requiring water solubility or log K ow testing for castor oil, sulfated, sodium salt (CASRN 68187-76-8). These changes are further discussed in...

  15. Medium scale test study of chemical cleaning technique for secondary side of SG in PWR

    International Nuclear Information System (INIS)

    The medium scale test study of chemical cleaning technique for removing corrosion product (Fe3O4) in secondary side of SG in PWR has been completed. The test has been carried out in a medium scale test loop. The medium scale test evaluated the effect of the chemical cleaning technique (temperature, flow rate, cleaning time, cleaning process), the state of corrosion product deposition on magnetite (Fe3O4) solubility and safety of materials of SG in cleaning process. The inhibitor component of chemical cleaning agent has been improved by electrochemical linear polarization method, the effect of inhibitor on corrosion resistance of materials have been examined in the medium scale test loop, the most components of chemical cleaning agent have been obtained, the EDTA is main component in cleaning agent. The electrochemical method for monitor corrosion of materials during cleaning process has been completed in the laboratory. The study of the medium scale test of chemical cleaning technique have had the optimum chemical cleaning technique for remove corrosion product in SG secondary side of PWR. (9 refs., 4 figs., 11 tabs.)

  16. Predictive performance of the Vitrigel-eye irritancy test method using 118 chemicals.

    Science.gov (United States)

    Yamaguchi, Hiroyuki; Kojima, Hajime; Takezawa, Toshiaki

    2016-08-01

    We recently developed a novel Vitrigel-eye irritancy test (EIT) method. The Vitrigel-EIT method is composed of two parts, i.e., the construction of a human corneal epithelium (HCE) model in a collagen vitrigel membrane chamber and the prediction of eye irritancy by analyzing the time-dependent profile of transepithelial electrical resistance values for 3 min after exposing a chemical to the HCE model. In this study, we estimated the predictive performance of Vitrigel-EIT method by testing a total of 118 chemicals. The category determined by the Vitrigel-EIT method in comparison to the globally harmonized system classification revealed that the sensitivity, specificity and accuracy were 90.1%, 65.9% and 80.5%, respectively. Here, five of seven false-negative chemicals were acidic chemicals inducing the irregular rising of transepithelial electrical resistance values. In case of eliminating the test chemical solutions showing pH 5 or lower, the sensitivity, specificity and accuracy were improved to 96.8%, 67.4% and 84.4%, respectively. Meanwhile, nine of 16 false-positive chemicals were classified irritant by the US Environmental Protection Agency. In addition, the disappearance of ZO-1, a tight junction-associated protein and MUC1, a cell membrane-spanning mucin was immunohistologically confirmed in the HCE models after exposing not only eye irritant chemicals but also false-positive chemicals, suggesting that such false-positive chemicals have an eye irritant potential. These data demonstrated that the Vitrigel-EIT method could provide excellent predictive performance to judge the widespread eye irritancy, including very mild irritant chemicals. We hope that the Vitrigel-EIT method contributes to the development of safe commodity chemicals. Copyright © 2015 The Authors. Journal of Applied Toxicology published by John Wiley & Sons Ltd. PMID:26472347

  17. Assessment of impacts at the advanced test reactor as a result of chemical releases at the Idaho Chemical Processing Plant

    International Nuclear Information System (INIS)

    This report provides an assessment of potential impacts at the Advanced Test Reactor Facility (ATR) resulting from accidental chemical spill at the Idaho Chemical Processing Plant (ICPP). Spills postulated to occur at the Lincoln Blvd turnoff to ICPP were also evaluated. Peak and time weighted average concentrations were calculated for receptors at the ATR facility and the Test Reactor Area guard station at a height above ground level of 1.0 m. Calculated concentrations were then compared to the 15 minute averaged Threshold Limit Value - Short Term Exposure Limit (TLV-STEL) and the 30 minute averaged Immediately Dangerous to Life and Health (IDLH) limit. Several different methodologies were used to estimate source strength and dispersion. Fifteen minute time weighted averaged concentrations of hydrofluoric acid and anhydrous ammonia exceeded TLV-STEL values for the cases considered. The IDLH value for these chemicals was not exceeded. Calculated concentrations of ammonium hydroxide, hexone, nitric acid, propane, gasoline, chlorine and liquid nitrogen were all below the TLV-STEL value

  18. Buffer Chemical Polishing and RF Testing of the 56 MHz SRF Cavity

    Energy Technology Data Exchange (ETDEWEB)

    Burrill,A.

    2009-01-01

    The 56 MHz cavity presents a unique challenge in preparing it for RF testing prior to construction of the cryomodule. This challenge arises due to the physical dimensions and subsequent weight of the cavity, and is further complicated by the coaxial geometry, and the need to properly chemically etch and high pressure rinse the entire inner surface prior to RF testing. To the best of my knowledge, this is the largest all niobium SRF cavity to be chemically etched and subsequently tested in a vertical dewar at 4K, and these processes will be the topic of this technical note.

  19. Steam generator chemical cleaning demonstration test No. 1 in a pot boiler

    International Nuclear Information System (INIS)

    The effectiveness of the Electric Power Research Institute (EPRI Mark I) chemical cleaning solvent process was tested utilizing a 12 tube pot boiler that had previously been fouled and dented under 30 days of high chloride fault chemistry operation. Specifically, the intent of this chemical cleaning test was to: (1) dissolve sludge from the tubesheet, (2) remove non-protective magnetite from dented tube/support crevice regions, and (3) quantify the extent of corrosion of steam generator material during the test. Two laboratory cleaning demonstrations of 191 and 142 hours were performed

  20. Non-standard tests for process control in chemically bonded sands

    Directory of Open Access Journals (Sweden)

    S. Ramrattan

    2016-01-01

    Full Text Available Chemically bonded sand cores and molds are more commonly referred to as precision sand systems in the high production automotive powertrain sector. Their behavior in contact with molten metal can lead to casting defects. Consequently, the interaction is of great interest and an important part of metal casting technology. The American Foundry Society (AFS sand testing is based on physical, mechanical, thermal and chemical properties of the sand system. Foundry engineers have long known that certain AFS sand tests provide limited information regarding control of molding and casting quality. The inadequacy is due to the fact that sand casting processes are inherently thermo-mechanical, thermo-chemical and thermo-physical. Non-standard foundry sand testing has proven useful for laboratory measurement of these characteristics in foundry sand using a disc-shaped specimen. Similarly, the equivalent disc-shaped specimens are used for casting trials. In order to accomplish near-net-shape casting with minimal defects, it is necessary to understand both the properties of the sand system, as well as the interface of molten metal when different binders, additives and/or refractory coatings are used. The methodology for the following non-standard chemically bonded sand tests is described: (1 disc transverse; (2 impact; (3 modified permeability; (4 abrasion; (5 thermal distortion; (6 quick loss on ignition. The data related to the non-standard sand tests were analyzed and interpreted. The test results indicate that there is relatively lower test-to-test variability with the disc-shaped specimens. The non-standard tests were able to discriminate between the chemically bonded polyurethane cold box sand specimens. Further studies should be conducted on various other sand and binder systems as well as on different specimen thicknesses.

  1. Use of fish embryo toxicity tests for the prediction of acute fish toxicity to chemicals.

    Science.gov (United States)

    Belanger, Scott E; Rawlings, Jane M; Carr, Gregory J

    2013-08-01

    The fish embryo test (FET) is a potential animal alternative for the acute fish toxicity (AFT) test. A comprehensive validation program assessed 20 different chemicals to understand intra- and interlaboratory variability for the FET. The FET had sufficient reproducibility across a range of potencies and modes of action. In the present study, the suitability of the FET as an alternative model is reviewed by relating FET and AFT. In total, 985 FET studies and 1531 AFT studies were summarized. The authors performed FET-AFT regressions to understand potential relationships based on physical-chemical properties, species choices, duration of exposure, chemical classes, chemical functional uses, and modes of action. The FET-AFT relationships are very robust (slopes near 1.0, intercepts near 0) across 9 orders of magnitude in potency. A recommendation for the predictive regression relationship is based on 96-h FET and AFT data: log FET median lethal concentration (LC50) = (0.989 × log fish LC50) - 0.195; n = 72 chemicals, r = 0.95, p acute fish-acute fish toxicity relationships with the following species: fathead minnow, rainbow trout, bluegill sunfish, Japanese medaka, and zebrafish. The FET is scientifically supportable as a rational animal alternative model for ecotoxicological testing of acute toxicity of chemicals to fish. PMID:23606235

  2. Testing Chemical Safety: What Is Needed to Ensure the Widespread Application of Non-animal Approaches?

    Directory of Open Access Journals (Sweden)

    Natalie Burden

    2015-05-01

    Full Text Available Scientists face growing pressure to move away from using traditional animal toxicity tests to determine whether manufactured chemicals are safe. Numerous ethical, scientific, business, and legislative incentives will help to drive this shift. However, a number of hurdles must be overcome in the coming years before non-animal methods are adopted into widespread practice, particularly from regulatory, scientific, and global perspectives. Several initiatives are nevertheless underway that promise to increase the confidence in newer alternative methods, which will support the move towards a future in which less data from animal tests is required in the assessment of chemical safety.

  3. Testing Chemical Safety: What Is Needed to Ensure the Widespread Application of Non-animal Approaches?

    Science.gov (United States)

    Burden, Natalie; Sewell, Fiona; Chapman, Kathryn

    2015-05-01

    Scientists face growing pressure to move away from using traditional animal toxicity tests to determine whether manufactured chemicals are safe. Numerous ethical, scientific, business, and legislative incentives will help to drive this shift. However, a number of hurdles must be overcome in the coming years before non-animal methods are adopted into widespread practice, particularly from regulatory, scientific, and global perspectives. Several initiatives are nevertheless underway that promise to increase the confidence in newer alternative methods, which will support the move towards a future in which less data from animal tests is required in the assessment of chemical safety. PMID:26018957

  4. Interpretation of fish biomarker data for identification, classification, risk assessment and testing of endocrine disrupting chemicals.

    Science.gov (United States)

    Dang, ZhiChao

    2016-01-01

    Chemical induced changes in fish biomarkers vitellogenin (VTG), secondary sex characteristics (SSC), and sex ratio indicate modes/mechanisms of action (MOAs) of EAS (estrogen, androgen and steroidogenesis) pathways. These biomarkers could be used for defining MOAs and the causal link between MOAs and adverse effects in fish for the identification of endocrine disrupting chemicals (EDCs). This paper compiled data sets of 150 chemicals for VTG, 57 chemicals for SSC and 38 chemicals for sex ratio in fathead minnow, medaka and zebrafish. It showed 1) changes in fish biomarkers can indicate the MOAs as anticipated; 2) in addition to EAS pathways, chemicals with non-EAS pathways induced changes in fish biomarkers; 3) responses of fish biomarkers did not always follow the anticipated patterns of EAS pathways. These responses may result from the interaction of chemical-induced multiple MOAs and confounding factors like fish diet, infection, culture conditions, general toxicity and stress response. The complex response of fish biomarkers to a chemical of interest requires EDC testing at multiple biological levels. Interpretation of fish biomarker data should be combined with relevant information at different biological levels, which is critical for defining chemical specific MOAs. The utility of fish biomarker data for identification, classification, PBT assessment, risk assessment, and testing of EDCs in the regulatory context was discussed. This paper emphasizes the importance of fish biomarker data in the regulatory context, a weight of evidence approach for the interpretation of fish biomarker data and the need for defining levels of evidence for the identification of EDCs. PMID:27155823

  5. Project W-314 Polyurea Special Protective Coating (SPC) Test Report Chemical Compatibility and Physical Characteristics Testing

    International Nuclear Information System (INIS)

    This Engineering Test report outlines the results obtained from testing polyurea on its decon factor, tank waste compatibility, and adhesion strength when subjected to a high level of gamma radiation. This report is used in conjunction with RPP-7187 Project W-314 Pit Coatings Repair Requirements Analysis, to document the fact polyurea meets the project W-314 requirements contained in HNF-SD-W314-PDS-005 and is therefore an acceptable SPC for use in W-314 pit refurbishments

  6. A Review on Mutagenicity Testing for Hazard Classification of Chemicals at Work: Focusing on in vivo Micronucleus Test for Allyl Chloride.

    Science.gov (United States)

    Rim, Kyung-Taek; Kim, Soo-Jin

    2015-09-01

    Chemical mutagenicity is a major hazard that is important to workers' health. Despite the use of large amounts of allyl chloride, the available mutagenicity data for this chemical remains controversial. To clarify the mutagenicity of allyl chloride and because a micronucleus (MN) test had not yet been conducted, we screened for MN induction by using male ICR mice bone marrow cells. The test results indicated that this chemical is not mutagenic under the test conditions. In this paper, the regulatory test battery and several assay combinations used to determine the genotoxic potential of chemicals in the workplace have been described. Further application of these assays may prove useful in future development strategies of hazard evaluations of industrial chemicals. This study also should help to improve the testing of this chemical by commonly used mutagenicity testing methods and investigations on the underlying mechanisms and could be applicable for workers' health. PMID:26929826

  7. Closing the gap: from public concerns about health effects to science-based testing of chemicals

    OpenAIRE

    Sergey Shaposhnikov; Gunnar Brunborg; Andrew Collins

    2015-01-01

    The comet assay is a powerful technology for measuring DNA integrity in humans and other organisms at the level of individual cells. The assay is used for research and industrial testing but suffers from a lack of standardisation, which hinders its use on a larger scale, for example as a diagnostic tool in personalised medicine or as a standard industrial testing approach for assessing toxic effects of chemicals and drugs. A variety of comet assay equipment has been used by different rese...

  8. Can vaccinia virus be replaced by MVA virus for testing virucidal activity of chemical disinfectants?

    Directory of Open Access Journals (Sweden)

    Rapp Ingrid

    2010-06-01

    Full Text Available Abstract Background Vaccinia virus strain Lister Elstree (VACV is a test virus in the DVV/RKI guidelines as representative of the stable enveloped viruses. Since the potential risk of laboratory-acquired infections with VACV persists and since the adverse effects of vaccination with VACV are described, the replacement of VACV by the modified vaccinia Ankara strain (MVA was studied by testing the activity of different chemical biocides in three German laboratories. Methods The inactivating properties of different chemical biocides (peracetic acid, aldehydes and alcohols were tested in a quantitative suspension test according to the DVV/RKI guideline. All tests were performed with a protein load of 10% fetal calf serum with both viruses in parallel using different concentrations and contact times. Residual virus was determined by endpoint dilution method. Results The chemical biocides exhibited similar virucidal activity against VACV and MVA. In three cases intra-laboratory differences were determined between VACV and MVA - 40% (v/v ethanol and 30% (v/v isopropanol are more active against MVA, whereas MVA seems more stable than VACV when testing with 0.05% glutardialdehyde. Test accuracy across the three participating laboratories was high. Remarkably inter-laboratory differences in the reduction factor were only observed in two cases. Conclusions Our data provide valuable information for the replacement of VACV by MVA for testing chemical biocides and disinfectants. Because MVA does not replicate in humans this would eliminate the potential risk of inadvertent inoculation with vaccinia virus and disease in non-vaccinated laboratory workers.

  9. Use of genotoxicity tests in a TIE to identify chemicals potentially affecting human health

    International Nuclear Information System (INIS)

    Imperial Oil operates a sour gas processing plant in southern Alberta that has, for the past several years, been the focus of considerable public and regulatory concern over perceived contamination of soils and groundwater on a nearby ranch. Elevated concentrations of DOC (∼140 mg/L) have been received in groundwater underlying the plant site. Two process-related chemicals, sulfolane and diisopropanolamine (DIPA), had been previously identified as the primary components of the DOC plume, although the chemicals associated with 30% of the DOC could not be identified. A risk assessment was initiated in 1994 to determine whether off-site migration of sulfolane and DIPA or of other unidentified contaminants poses a risks to human health and/or ecological receptors. One component of the risk assessment included conducting a TIE to help identify the chemical(s) in contaminated groundwater underlying the gas plant that might adversely affect human health. Three endpoints were utilized in the TIE: MicroTox, SOS-Chromotest and the Ames test. MicroTox was used since it exhibited a response to whole groundwater from the site, while the genotoxicity tests were used because DIPA reportedly causes a response in the Ames test and because of the concern over potential human health affects arising from other unidentified contaminants. Results of the TIE indicated that the chemicals causing the toxicity in the groundwater sample were water soluble compounds, with similar characteristics to the process chemicals used at the gas plant and detected at high concentrations in groundwater from the plant site. These results provided additional evidence to help focus the risk assessment on the chemicals sulfolane and diisopropanolamine

  10. Selection of potential cold water marine species for testing of oil dispersants, and chemically dispersed oil

    International Nuclear Information System (INIS)

    A study regarding marine species for toxicity testing for Alaska conditions was presented and the potential adverse impacts of a large marine oil spill in cold water were discussed with the objective to determine if the spill should be treated by the use of oil dispersants. Without dispersion, the oil can pollute marine epifauna and can deposit on beaches. The decision to apply dispersants to a marine oil spill requires knowledge of the toxicity of the undispersed oil to pelagic marine life occurring via natural dispersion as opposed to the toxicity of the oil-dispersant mixture. Most standard toxicity tests apply to warm water species. This paper discussed the need to have a standard test species relevant to Alaska waters for toxicity testing. In this study, toxicity testing was done according to the methods of the Chemical Response to Oil Spills : Ecological Effects Research Forum (CROSERF). The testing included capturing adult species in the winter and holding them until larval hatching. Toxicity testing was completed in a narrow time frame before hatching ceased. Many chemical samples were tested. Topsmelt, urchins, shellfish, mysids, copepods, pink salmon fry, and tidepool sculpin were considered by the author to be the most useful for certain types of toxicity testing. 29 refs

  11. EPAs DSSTox Chemical Database: A Resource for the Non-Targeted Testing Community (EPA NTA workshop)

    Science.gov (United States)

    EPA’s DSSTox database project, which includes coverage of the ToxCast and Tox21 high-throughput testing inventories, provides high-quality chemical-structure files for inventories of toxicological and environmental relevance. A feature of the DSSTox project, which differentiates ...

  12. Alternatives to in vivo Tests to Detect Endocrine Disrupting Chemicals (EDCs) in Fish and Amphibians

    Science.gov (United States)

    A significant amount of current research in risk assessment of chemicals is targeted to evaluate alternative test methods that may reduce, replace or refine the use of animals, while ensuring human and environmental health and safety. In 2009, the US EPA began implementation of t...

  13. Biological and chemical tests of contaminated soils to determine bioavailability and environmentally acceptable endpoints (EAE)

    International Nuclear Information System (INIS)

    The understanding of the concept of bioavailability of soil contaminants to receptors and its use in supporting the development of EAE is growing but still incomplete. Nonetheless, there is increased awareness of the importance of such data to determine acceptable cleanup levels and achieve timely site closures. This presentation discusses a framework for biological and chemical testing of contaminated soils developed as part of a Gas Research Institute (GRI) project entitled ''Environmentally Acceptable Endpoints in Soil Using a Risk Based Approach to Contaminated Site Management Based on Bioavailability of Chemicals in Soil.'' The presentation reviews the GRI program, and summarizes the findings of the biological and chemical testing section published in the GRI report. The three primary components of the presentation are: (1) defining the concept of bioavailability within the existing risk assessment paradigm, (2) assessing the usefulness of the existing tests to measure bioavailability and test frameworks used to interpret these measurements, and (3) suggesting how a small selection of relevant tests could be incorporated into a flexible testing scheme for soils to address this issue

  14. Selection of reference soils for chemicals testing in the European Community

    International Nuclear Information System (INIS)

    Based on an multivariate statistical evaluation of binary and metric data relating to the soil cover of the European Community five regionally representative reference soils (EURO-Soils) have been identified for chemicals testing in the EC. The soil material sampled at representative localities in Italy, Greece, Great Britain, France and Germany was treated and prepared according to OECD Test Guideline 106 and analysed in detail. The homogenised specimens were subject to an EC-wide ring test to evaluate the feasibility of the modified guideline and to validate the physical-chemical amenability of the reference soils for sorption tests. The results proved the validity of the soils selected for assessing the potential behaviour of new chemicals in soil on the basis of a comparative evaluation of the individual test results obtained. In the light of this parametric assessment potential test soils were subsequently identified in the individual EC Member States which correspond as far as possible to the above reference soils in terms of both taxonomy and sorption-relevant properties. (orig.). 164 refs., 30 tabs., 24 figs

  15. OECD Guidelines for the Testing of Chemicals, Test No. 226: Predatory mite (Hypoaspis (Geolaelaps) aculeifer) reproduction test in soil

    DEFF Research Database (Denmark)

    Römbke, L. Becker, B. Dark, Th. Moser, N. Halsall, W. Powley, A. Ruf, C. Scholer, E. Smit, P. Wege, N. Zenz m.fl., J.; Krogh, Paul Henning

    2008-01-01

    replicates for each test concentrations and six to eight control replicates, of 10 animals each, are recommended. At 20 oC, the test lasts 14 days after introducing the females, which usually allows the control offspring to reach the deutonymph stage. The number of surviving females (mortality < 20% for a...... valid test) and the number of juveniles per test vessel (at least 50 for a valid test) are determined. The fecundity of the mites exposed to the test substance is compared to that of controls in order to determine the ECx (e.g. EC10, EC50) or the No Observed Effect Concentration (NOEC). Any observed......This Test Guideline describes a method to assess the effects of chemical substances in soil on the reproductive output of the soil mite species Hypoaspis (Geolaelaps) aculeifer Canestrini (Acari: Laelapidae). It can be used for water soluble or insoluble substances, but not with volatile substances...

  16. Assessment of chemicals using a battery of neurobehavioral tests: a comparative study.

    Science.gov (United States)

    Pryor, G T; Uyeno, E T; Tilson, H A; Mitchell, C L

    1983-01-01

    Single-dose LD10S and LD50S were determined in male, Fischer-344 rats for acrylamide monomer, arsenic trioxide, chlordecone, lead acetate, methylmercury hydroxide, monosodium salicylate, tetraethyl tin, and triethyl lead chloride. Proportions of the single-dose LD10S were used in a subacute study to estimate the 28-day LD20S for each chemical. Proportions of the 28-day LD20S were used in a subchronic (105 days of dosing) study to determine the effectiveness of a battery of neurobehavioral tests for detecting and characterizing the neurotoxic effects of each chemical. The battery consisted of undifferentiated motor activity, forelimb and hindlimb grip strengths, rotation orientation, thermal sensitivity, startle responsiveness to acoustic and air-puff stimuli, and performance of a multisensory conditioned pole-climb avoidance response task; body weight and rectal temperature were also monitored. The battery of tests was administered on eight occasions, that is, before, at three-week intervals during dosing (PO or IP, five days each week for 15 weeks), and at three and six weeks after dosing. Normative data (controls from each experiment) indicated fair overall stability of the measures over the eight test sessions, but experiment-to-experiment variability in this regard was clearly evident. The inherent statistical sensitivity of the tests varied greatly as estimated by their coefficients of variation, which ranged from 1% (rectal temperature) to over 100% (rotation orientation). Intercorrelations among the various measures were low to moderate indicating relatively little redundancy. The various measures were differentially affected by the eight chemicals: body weight by all eight; rectal temperature by one; undifferentiated motor activity by three; forelimb grip strength by two; hindlimb grip strength by four; rotation orientation by one; thermal sensitivity by one; startle responsiveness by three; and CAR performance by five. A profile analysis using the slopes

  17. Identifying and characterizing chemical skin sensitizers without animal testing: Colipa's research and method development program.

    Science.gov (United States)

    Aeby, P; Ashikaga, T; Bessou-Touya, S; Schepky, A; Gerberick, F; Kern, P; Marrec-Fairley, M; Maxwell, G; Ovigne, J-M; Sakaguchi, H; Reisinger, K; Tailhardat, M; Martinozzi-Teissier, S; Winkler, P

    2010-09-01

    The sensitizing potential of chemicals is usually identified and characterized using one of the available animal test methods, such as the mouse local lymph node assay. Due to the increasing public and political concerns regarding the use of animals for the screening of new chemicals, the Colipa Skin Tolerance Task Force collaborates with and/or funds research groups to increase and apply our understanding of the events occurring during the acquisition of skin sensitization. Knowledge gained from this research is used to support the development and evaluation of novel alternative approaches for the identification and characterization of skin sensitizing chemicals. At present one in chemico (direct peptide reactivity assay (DPRA)) and two in vitro test methods (cell based assays (MUSST and h-CLAT)) have been evaluated within Colipa inter-laboratory ring trials and accepted by the European Centre for the Validation of Alternative Methods (ECVAM) for pre-validation. Data from all three test methods will be used to support the development of testing strategy approaches for skin sensitizer potency prediction. The replacement of the need for animal testing for skin sensitization risk assessment is viewed as ultimately achievable and the next couple of years should set the timeline for this milestone. PMID:20624454

  18. Rat epidermal keratinocyte organotypic culture (ROC) as a model for chemically induced skin irritation testing

    International Nuclear Information System (INIS)

    The potential of rat epidermal keratinocyte (REK) organotypic culture (ROC) with proper stratum corneum barrier as a model for screening skin irritants was evaluated. The test chemicals were selected from ECETOC database (1995) and the observed in vitro irritation potential was compared to ECETOC in vivo primary irritation index (PII), to EU risk phrases, and to the harmonized OECD criteria. Chemicals were applied onto the stratum corneum surface of ROC for 30 min and samples were taken from the underlying medium at 4 and 8 h after exposure. Cell membrane integrity (determined by LDH assay) and pro-inflammatory effect (determined by IL-1α release) were verified at both time points and correlated to PII values. The best correlation (R 2 = 0.831) was seen with LDH leakage test. Based on obtained data, chemicals were classified according to criteria defined by EU and OECD. From 12 chemicals, only two were incorrectly classified according to OECD criteria when using LDH leakage and IL-1α release as irritation markers. At the end of experiment, chemical-treated ROC cultures were fixed and histological changes were assessed. Typical signs for irritation were lightly stained cytoplasm, condensed nuclei, cellular vacuolization, eosinophilic cytoplasms, and blebbing. These irritation effects of chemicals were graded visually into four classes (A-D). The extent of morphological perturbations of the cultures mostly correlated with PII. The present results indicate the validity of the ROC model in predicting skin irritation potential of chemicals and show that the use of set of irritation markers with different mechanistic responses gives more information on irritation than if only one marker was used

  19. A dataset on 145 chemicals tested in alternative assays for skin sensitization undergoing prevalidation.

    Science.gov (United States)

    Natsch, Andreas; Ryan, Cindy A; Foertsch, Leslie; Emter, Roger; Jaworska, Joanna; Gerberick, Frank; Kern, Petra

    2013-11-01

    Skin sensitization is a key endpoint for cosmetic ingredients, with a forthcoming ban for animal testing in Europe. Four alternative tests have so far been submitted to ECVAM prevalidation: (i) MUSST and (ii) h-Clat assess surface markers on dendritic cell lines, (iii) the direct peptide reactivity assay (DPRA) measures reactivity with model peptides and (iv) the KeratinoSens(TM) assay which is based on detection of Nrf2-induced luciferase. It is anticipated that only an integrated testing strategy (ITS) based on a battery of tests might give a full replacement providing also a sensitization potency assessment, but this concept should be tested with a data-driven analysis. Here we report a database on 145 chemicals reporting the quantitative endpoints measured in a U937- test, the DPRA and KeratinoSens(TM) . It can serve to develop data-driven ITS approaches as we show in a parallel paper and provides a view as to the current ability to predict with in vitro tests as we are entering 2013. It may also serve as reference database when benchmarking new molecules with in vitro based read-across and find use as a reference database when evaluating new tests. The tests and combinations thereof were evaluated for predictivity, and overall a similar predictivity was found as before on three-fold smaller datasets. Analysis of the dose-response parameters of the individual tests indicates a correlation to sensitization potency. Detailed analysis of chemicals false-negative and false-positive in two tests helped to define limitations in the tests but also in the database derived from animal studies. PMID:23576290

  20. Development and Testing of a High Capacity Plasma Chemical Reactor in the Ukraine

    Energy Technology Data Exchange (ETDEWEB)

    Reilly, Raymond W.

    2012-07-30

    This project, Development and Testing of a High Capacity Plasma Chemical Reactor in the Ukraine was established at the Kharkiv Institute of Physics and Technology (KIPT). The associated CRADA was established with Campbell Applied Physics (CAP) located in El Dorado Hills, California. This project extends an earlier project involving both CAP and KIPT conducted under a separate CRADA. The initial project developed the basic Plasma Chemical Reactor (PCR) for generation of ozone gas. This project built upon the technology developed in the first project, greatly enhancing the output of the PCR while also improving reliability and system control.

  1. CHEMICALS

    CERN Multimedia

    Medical Service

    2002-01-01

    It is reminded that all persons who use chemicals must inform CERN's Chemistry Service (TIS-GS-GC) and the CERN Medical Service (TIS-ME). Information concerning their toxicity or other hazards as well as the necessary individual and collective protection measures will be provided by these two services. Users must be in possession of a material safety data sheet (MSDS) for each chemical used. These can be obtained by one of several means : the manufacturer of the chemical (legally obliged to supply an MSDS for each chemical delivered) ; CERN's Chemistry Service of the General Safety Group of TIS ; for chemicals and gases available in the CERN Stores the MSDS has been made available via EDH either in pdf format or else via a link to the supplier's web site. Training courses in chemical safety are available for registration via HR-TD. CERN Medical Service : TIS-ME :73186 or service.medical@cern.ch Chemistry Service : TIS-GS-GC : 78546

  2. PWR steam generator chemical cleaning process testing in model steam generators

    International Nuclear Information System (INIS)

    Corrosion related problems in PWR power plant steam generators have caused high maintenance costs, increased radiation exposure to plant personnel, and reduced unit availability. Two cleaning methods were investigated for their ability to clean deposits from steam generators thereby increasing the integrity of the steam generators and reducing personnel radiation exposure, due to reduced maintenance. First, an on-line chemical cleaning process (Chelant Addition) was tested for its ability to prevent corrosion product buildup in a steam generator. Second, an off-line dilute chemical cleaning process was tested to evaluate its ability to remove corrosion product deposits and leave minimal waste for disposal. These two processes were tested in model steam generators which simulated the operating conditions of a typical full size steam generator. Six model steam generators (MSG) were fabricated and qualified for their ability to reproduce denting at tube support plates. The results of six chemical cleaning tests and the post-cleaning destructive metallurgical evaluation of two of the model steam generators are reported

  3. In vitro chemical and cellular tests applied to uranium trioxide with different hydration states

    International Nuclear Information System (INIS)

    A simple and rapid in vitro chemical solubility test applicable to industrial uranium trioxide (UO3) was developed together with two in vitro cellular tests using rat alveolar macrophages maintained either in gas phase or in alginate beads at 37 degrees C. Industrial UO3 was characterized by particle size, X-ray, and IR spectra, and chemical transformation (e.g., aging and hydration of the dust) was also studied. Solvents used for the in vitro chemical solubility study included carbonates, citrates, phosphates, water, Eagle's basal medium, and Gamble's solution (simulated lung fluid), alone, with oxygen, or with superoxide ions. Results, expressed in terms of the half-time of dissolution, according to International Commission on Radiological Protection (ICRP) classification (D,W,Y), varied for different hydration states of UO3, showing a lower solubility of hydrated UO3 in solvents compared to basic UO3 or UO3 heated at 450 degrees C. Two in vitro cellular tests on cultured rat alveolar macrophages (cells maintained in gas phase and cells immobilized in alginate beads) were used on the same UO3 samples and generally showed a lower solution transfer rate in the presence of macrophages than in the culture medium alone. The results of in vitro chemical and cellular tests were compared, with four main conclusions; a good reproducibility of the three tests in Eagle's basal medium of the effect of hydration state on solubility, the classification of UO3 in terms of ICRP solubility criteria, and the ability of macrophoges to decrease uranium solubility in medium. 16 refs., 3 figs., 4 tabs

  4. Chemical decontamination for decommissioning purposes. (Vigorous decontamination tests of steel samples in a special test loop)

    International Nuclear Information System (INIS)

    The aim of the research activities described was to develop vigorous decontamination techniques for decommissioning purposes, taking into account the cost of treatment of the radwaste, to achieve possibly unrestricted release of the treated components, and to obtain know-how for in situ hard decontamination. The decontamination procedures for strong decontamination have been optimized in static and dynamic tests (DECO-loop). The best values have been found for: (i) hydrochloric acid: 4 to 5% vol. at low temperature, 0.7 to 1% vol. at high temperature (800C); (ii) hydrofluoric plus nitric acid: 1.5% vol. HF + 5% vol. HNO3 at low temperature; 0.3 to 0.5% vol. HF + 2.5 to 5% vol. HNO3 at high temperature. High flow rates are not necessary, but a good re-circulation of the solution is needed. The final contamination levels, after total oxide removal, are in accordance with limits indicated for unrestricted release of materials in some countries. The arising of the secondary waste is estimated. Decontamination of a 10 m2 surface would typically produce 0.5 to 3.0 kg of dry waste, corresponding to 1.6 to 10 kg of concrete conditioned waste

  5. [Embryonic stem cell test in screening of medicine and other chemicals].

    Science.gov (United States)

    Zhao, Qing; Xu, Jinsen

    2005-02-01

    The technique of embryonic stem cell test (EST) has been developed and used in vitro to screen new medicines and other chemicals. According to toxicity, such medicines and chemicals can be classified as: non-toxic, weak toxic and/or strong toxic. EST shows merits such as no requirement of the sacrifice of pregnant animals, no side-effects on human or animals for candidate medicines and chemicals, higher sensitivity of embryonic stem cells when compared with the sensitivity of ordinary tissues of adult samples in toxicologic researches, higher accuracy when combined with computing techniques, and possible quantitation based on techniques of molecular biology. Advances in utility of EST technique were reviewed and the prospect of technique was also discussed in this paper. PMID:15762145

  6. The testing of materials within the purview of the laws concerning the control of chemical substances

    International Nuclear Information System (INIS)

    The main approach adopted for this book is the question of whether and to what extent the commercially available chemical products (ranging from foodstuffs and drugs to pesticides and similar pollutants) have been assessed for environmental and health safety prior to release. The relevant existing laws concerning the testing and characterisation of substances are analysed and compared with a view to the major environmental principle, to prevent chemicals-induced hazards to health and the environment. The book reviews the following laws (and their implementing provisions): law on chemical substances, pesticides, fertilisers, drugs, detergents, leaded petrol, food and feedstuffs, explosives, and transport of hazardous materials. Environmentally significant laws reviewed include the waste management act, the atomic energy act (non-recycable wastes, plutonium, tritium), the water management act, and the act for protection against harmful effects on the environment. (orig./HP)

  7. Mixed waste chemical compatibility: A testing program for plastic packaging components

    International Nuclear Information System (INIS)

    The purpose of hazardous and radioactive materials packaging is to enable these materials to be transported without posing a threat to the health or property of the general public. To achieve this aim, regulations in the United States have been written establishing general design requirements for such packagings. While no regulations have been written specifically for mixed waste packaging, regulations for the constituents of mixed wastes, i.e., hazardous and radioactive substances, have been codified by the US Department of Transportation (DOT, 49 CFR 173) and the US Nuclear Regulatory Commission (NRC, 10 CFR 71). The design requirements for both hazardous [49 CFR 173.24 (e)(1)] and radioactive [49 CFR 173.412 (g)] materials packaging specify packaging compatibility, i.e., that the materials of the packaging at sign d any contents be chemically compatible with each other. Furthermore, Type A [49 CFR 173.412 (g)] and Type B (10 CFR 71.43) packaging design requirements stipulate that there be no significant chemical, galvanic, or other reaction between the materials and contents of the package. Based on these requirements, a Chemical Compatibility Testing Program was developed in the Transportation Systems Department at Sandia National Laboratories (SNL). The program attempts to assure any regulatory body that the issue of packaging material compatibility towards hazardous and radioactive materials has been addressed. This program has been described in considerable detail in an internal SNL document, the Chemical Compatibility Test Plan ampersand Procedure Report (Nigrey 1993)

  8. Correlation of Chemical and Physical Test Data for the Environmental Ageing of Tefzel (ETFE). Revised

    Science.gov (United States)

    Morgan, G. J.; Campion, R. P.

    1997-01-01

    In a similar approach to that used for the previously issued correlation report for Coflon (CAPP/M.10), this report aims to identify any correlations between mechanical property changes and chemical/morphological changes for Tefzel, using information supplied in other MERL and TRI project reports. Differences identified with Coflon behaviour will be of scientific interest as well as appropriate to project applications, as Tefzel and Coflon are chemical isomers. Owing to the considerable chemical resistance of Tefzel, much of its testing so far has been based on mechanical properties. Where changes have occurred, chemical analysis can now be targeted more effectively. Relevant test data collated here include: tensile modulus and related properties, permeation coefficients, % crystallinity, some crack growth resistance measurements, and other observations where significant. Fluids based on methanol and amine (Fluid G), a mixture of methane, carbon dioxide and hydrogen sulphide gases plus an aqueous amine solution (Fluid F), and an aromatic oil mix of heptane, cyclohexane, toluene and 1-propanol (Fluid I) have affected Tefzel to varying degrees, and are discussed in some detail herein.

  9. Correlation of Chemical and Physical Test Data for the Environmental Ageing of Tefzel (ETFE)

    Science.gov (United States)

    Morgan, G. J.; Campion, R. P.

    1996-01-01

    In a similar approach to that used for the previously issued correlation report for Coflon (CAPP/M.10), this report aims to identify any correlations between mechanical property changes and chemical/morphological changes for Tefzel, using information supplied in other MERL and TRI project reports (plus latest data which will be included in final reports for Phase 1). Differences identified with Coflon behaviour will be of scientific interest as well as appropriate to project applications, as Tefzel and Coflon are chemical isomers. Owing to the considerable chemical resistance of Tefzel, much of its testing so far has been based on mechanical properties. Where changes have occurred, chemical analysis can now be targeted more effectively. Relevant test data collated here include: tensile modulus and related properties, permeation coefficients, % crystallinity, and other observations where significant. Fluids based on methanol and amine (Fluid G), a mixture of methane, carbon dioxide and hydrogen sulphide gases plus an aqueous amine solution (Fluid F), and an aromatic oil mix of heptane, cyclohexane, toluene and I-propanol (Fluid 1) have affected Tefzel to varying degrees, and are discussed in some detail herein.

  10. TREATABILITY STUDIES USED TO TEST FOR EXOTHERMIC REACTIONS OF PLUTONIUM DECONTAMINATION CHEMICALS

    International Nuclear Information System (INIS)

    Fluor Hanford is decommissioning the Plutonium Finishing Plant (PFP) at the Hanford site in Eastern Washington. Aggressive chemicals are commonly used to remove transuranic contaminants from process equipment to allow disposal as low level waste. Chemicals being considered for decontamination of gloveboxes in PFP include cerium(IV) nitrate in a nitric acid solution, and proprietary commercial solutions that include acids, degreasers, and sequestering agents. Fluor's decontamination procedure involves application of chemical solutions as a spray on the contaminated surfaces, followed by a wipe-down with rags. This process effectively transfers the transuranic materials to the decontamination liquids, which are then absorbed by rags and packaged for disposal as TRU waste. Concerns regarding the safety of this procedure developed following a fire at Rocky Flats in 2003. The fire occurred in a glovebox that had been treated with cerium nitrate, which is one of the decontamination chemicals that Fluor Hanford has proposed to use. The investigation of the event was hampered by the copious use of chemicals and water to extinguish the fire, and was not conclusive regarding the cause. However, the reviewers noted that rags were found in the glovebox, suggesting that the combination of rags and chemicals may have contributed to the fire. With that uncertainty, Fluor began an investigation into the potential for fire when using the chemicals and materials in the decontamination process. The focus of this work has been to develop a disposal strategy that will provide a chemically stable waste form at expected Hanford waste storage temperatures. Treatability tests under CERCLA were used to assess the use of certain chemicals and wipes during the decontamination process. Chemicals being considered for decontamination of gloveboxes at PFP include cerium (IV) nitrate in a nitric acid solution, and proprietary commercial solutions as RadPro(trademark) that include acids, degreasers

  11. Nonclinical reproductive toxicity testing requirements for drugs, pesticides, and industrial chemicals in India and China.

    Science.gov (United States)

    Rao, K S; Dong, Jing

    2013-01-01

    India and China have booming chemical, agrochemical, and pharmaceutical industries. Both countries also represent expanding markets for foreign chemical and healthcare companies. All such products require reproductive toxicity testing before marketing. The ICH testing guidelines for medicinal products are not applicable in China and India. Nonetheless, reproductive toxicity studies designed and run to ICH principles are generally acceptable for submission. The Chinese guidelines take into consideration traditional Chinese medicines, which are usually mixtures. Likewise, the specific recommendations of India and China for the reproductive toxicity testing of chemicals and pesticides differ from those of the OECD and the USEPA. Again, studies performed in accordance with internationally recognized principles are usually acceptable for submission in both countries. The Chinese guideline for the reproductive toxicity testing of agrochemicals is currently under revision; the new version is expected to resemble more closely the requirements of the OECD and the USEPA. As a member of the OECD, India has conducted Good Laboratory Practice (GLP) inspection, accreditation, and monitoring activities since 2004. China has made several attempts to join the Council Decisions on Mutual Acceptance of Data in the Assessment of Chemicals since 2005. Currently 47 laboratories in China have been certified by the national GLP authorities. Several laboratories in China have also been recently been certified by OECD member countries as GLP compliant. In India, there are currently 23 GLP-Certified laboratories; about six of these are also AALAC accredited. The specific study designs specified in the guidelines of China and India for reproductive toxicity studies are described in detail in this chapter. PMID:23138892

  12. Testing Chemical Safety: What Is Needed to Ensure the Widespread Application of Non-animal Approaches?

    OpenAIRE

    Natalie Burden; Fiona Sewell; Kathryn Chapman

    2015-01-01

    Scientists face growing pressure to move away from using traditional animal toxicity tests to determine whether manufactured chemicals are safe. Numerous ethical, scientific, business, and legislative incentives will help to drive this shift. However, a number of hurdles must be overcome in the coming years before non-animal methods are adopted into widespread practice, particularly from regulatory, scientific, and global perspectives. Several initiatives are nevertheless underway that promis...

  13. Towards in vitro DT/DNT testing: Assaying chemical susceptibility in early differentiating NT2 cells.

    Science.gov (United States)

    Menzner, Ann-Katrin; Abolpour Mofrad, Sepideh; Friedrich, Oliver; Gilbert, Daniel F

    2015-12-01

    Human pluripotent embryonal carcinoma (NT2) cells are increasingly considered as a suitable model for in vitro toxicity testing, e.g. developmental toxicity and neurotoxicity (DT/DNT) studies, as they undergo neuronal differentiation upon stimulation with retinoic acid (RA) and permit toxicity testing at different stages of maturation. NT2 cells have recently been reported to show specific changes in dielectric resistance profiles during differentiation which can be observed as early as 24h upon RA-stimulation. These observations suggest altered susceptibility to chemicals at an early stage of differentiation. However, chemical susceptibility of early differentiating NT cells has not yet been studied. To address this question, we have established a cell fitness screening assay based on the analysis of intracellular ATP levels and we applied the assay in a large-scale drug screening experiment in NT2 stem cells and early differentiating NT2 cells. Subsequent analysis of ranked fitness phenotypes revealed 19 chemicals with differential toxicity profile in early differentiating NT2 cells. To evaluate whether any of the identified drugs have previously been associated with DT/DNT, we conducted a literature search on the identified molecules and quantified the fraction of chemicals assigned to the FDA (Food and Drug Administration) pregnancy risk categories (PRC) N, A, B, C, D, and X in the hit list and the small molecule library. While the fractions of the categories N and B were decreased (0.81 and 0.35-fold), the classes C, D and X were increased (1.35, 1.47 and 3.27-fold) in the hit list compared to the chemical library. From these data as well as from the literature review, identifying large fractions of chemicals being directly (∼42%) and indirectly associated with DT/DNT (∼32%), we conclude that our method may be beneficial to systematic in vitro-based primary screening for developmental toxicants and neurotoxicants and we propose cell fitness screening in

  14. 49 CFR Appendix B to Part 173 - Procedure for Testing Chemical Compatibility and Rate of Permeation in Plastic Packaging and...

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Procedure for Testing Chemical Compatibility and..., App. B Appendix B to Part 173—Procedure for Testing Chemical Compatibility and Rate of Permeation in Plastic Packaging and Receptacles 1. The purpose of this procedure is to determine the...

  15. Development and validation of animal-free test methods to predict the skin sensitizing potential of chemicals

    OpenAIRE

    Bauch, Caroline D.

    2013-01-01

    Skin sensitization is the development of the allergic contact dermatitis caused by chemicals. Regulatory accepted methods to assess skin sensitizing potential of chemicals are animal based tests, but increasing interest in animal welfare presses the development of animal-free methods. The aim of this work was the development, establishment and validation of several alternative methods to animal testing to predict the skin sensitizing potential of chemicals. Therefore several methods reflectin...

  16. Comparison of three marine screening tests and four Oslo and Paris Commission procedures to evaluate toxicity of offshore chemicals

    Energy Technology Data Exchange (ETDEWEB)

    Weideborg, M.; Vik, E.A.; Oefjord, G.D.; Kjoennoe, O. [Aquateam-Norwegian Water Technology Centre A/S, Oslo (Norway)

    1997-02-01

    The results from the screening toxicity tests Artemia salina, Microtox{reg_sign}, and Mitochondria RET test were compared with those obtained from OSPAR (Oslo and Paris Commissions)-authorized procedures for testing of offshore chemicals (Skeletonema costatum, Acartia tonsa, Abra alba, and Corophium volutator). In this study 82 test substances (26 non-water soluble) were included. The Microtox test was found to be the most sensitive of the three screening tests. Microtox and Mitochondria RET test results showed good correlation with results from Acartia and Skeletonema testing, and it was concluded that the Microtox test was a suitable screening test as a base for assessment of further testing, especially regarding water-soluble chemicals. Sensitivity of Artemia salina to the tested chemicals was too low for it to be an appropriate bioassay organism for screening testing. A very good correlation was found between the results obtained with the Skeletonema and Acartia tests. The results indicated no need for more than one of the Skeletonema or Acartia tests if the Skeletonema median effective concentration or Acartia median lethal concentration was greater than 200 mg/L. The sediment-reworker tests (A. Alba or C. volutator) for chemicals that are likely to end up in the sediments (non-water soluble or surfactants) should be performed, independent of results from screening tests and other OSPAR species.

  17. Testing for supply-limited and kinetic-limited chemical erosion in field measurements of regolith production and chemical depletion

    Science.gov (United States)

    Ferrier, Ken L.; Riebe, Clifford S.; Jesse Hahm, W.

    2016-06-01

    Chemical erosion contributes solutes to oceans, influencing atmospheric CO2 and thus global climate via the greenhouse effect. Quantifying how chemical erosion rates vary with climate and tectonics is therefore vital to understanding feedbacks that have maintained Earth's environment within a habitable range over geologic time. If chemical erosion rates are strongly influenced by the availability of fresh minerals for dissolution, then there should be strong connections between climate, which is modulated by chemical erosion, and tectonic uplift, which supplies fresh minerals to Earth's surface. This condition, referred to as supply-limited chemical erosion, implies strong tectonic control of chemical erosion rates. It differs from kinetic-limited chemical erosion, in which dissolution kinetics and thus climatic factors are the dominant regulators of chemical erosion rates. Here we present a statistical method for determining whether chemical erosion of silicate-rich bedrock is supply limited or kinetic limited, as an approach for revealing the relative importance of tectonics and climate in Earth's silicate weathering thermostat. We applied this method to published data sets of mineral supply rates and regolith chemical depletion and were unable to reject the null hypothesis that chemical erosion is supply limited in 8 of 16 cases. In seven of the remaining eight cases, we found behavior that is closer to supply limited than kinetic limited, suggesting that tectonics may often dominate over climate in regulating chemical erosion rates. However, statistical power analysis shows that new measurements across a wider range of supply rates are needed to help quantify feedbacks between climate and tectonics in Earth's long-term climatic evolution.

  18. Actual-Waste Testing Of Ultraviolet Light To Augment The Enhanced Chemical Cleaning Of SRS Sludge

    International Nuclear Information System (INIS)

    In support of Savannah River Site (SRS) tank closure efforts, the Savannah River National Laboratory (SRNL) conducted Real Waste Testing (RWT) to evaluate Enhanced Chemical Cleaning (ECC), an alternative to the baseline 8 wt% oxalic acid (OA) chemical cleaning technology for tank sludge heel removal. ECC utilizes a more dilute OA solution (2 wt%) and an oxalate destruction technology using ozonolysis with or without the application of ultraviolet (UV) light. SRNL conducted tests of the ECC process using actual SRS waste material from Tanks 5F and 12H. The previous phase of testing involved testing of all phases of the ECC process (sludge dissolution, OA decomposition, product evaporation, and deposition tank storage) but did not involve the use of UV light in OA decomposition. The new phase of testing documented in this report focused on the use of UV light to assist OA decomposition, but involved only the OA decomposition and deposition tank portions of the process. Compared with the previous testing at analogous conditions without UV light, OA decomposition with the use of UV light generally reduced time required to reach the target of <100 mg/L oxalate. This effect was the most pronounced during the initial part of the decomposition batches, when pH was <4. For the later stages of each OA decomposition batch, the increase in OA decomposition rate with use of the UV light appeared to be minimal. Testing of the deposition tank storage of the ECC product resulted in analogous soluble concentrations regardless of the use or non-use of UV light in the ECC reactor.

  19. ACTUAL-WASTE TESTING OF ULTRAVIOLET LIGHT TO AUGMENT THE ENHANCED CHEMICAL CLEANING OF SRS SLUDGE

    Energy Technology Data Exchange (ETDEWEB)

    Martino, C.; King, W.; Ketusky, E.

    2012-07-10

    In support of Savannah River Site (SRS) tank closure efforts, the Savannah River National Laboratory (SRNL) conducted Real Waste Testing (RWT) to evaluate Enhanced Chemical Cleaning (ECC), an alternative to the baseline 8 wt% oxalic acid (OA) chemical cleaning technology for tank sludge heel removal. ECC utilizes a more dilute OA solution (2 wt%) and an oxalate destruction technology using ozonolysis with or without the application of ultraviolet (UV) light. SRNL conducted tests of the ECC process using actual SRS waste material from Tanks 5F and 12H. The previous phase of testing involved testing of all phases of the ECC process (sludge dissolution, OA decomposition, product evaporation, and deposition tank storage) but did not involve the use of UV light in OA decomposition. The new phase of testing documented in this report focused on the use of UV light to assist OA decomposition, but involved only the OA decomposition and deposition tank portions of the process. Compared with the previous testing at analogous conditions without UV light, OA decomposition with the use of UV light generally reduced time required to reach the target of <100 mg/L oxalate. This effect was the most pronounced during the initial part of the decomposition batches, when pH was <4. For the later stages of each OA decomposition batch, the increase in OA decomposition rate with use of the UV light appeared to be minimal. Testing of the deposition tank storage of the ECC product resulted in analogous soluble concentrations regardless of the use or non-use of UV light in the ECC reactor.

  20. Chemical analysis and biological testing of materials from the EDS coal liquefaction process: a status report

    Energy Technology Data Exchange (ETDEWEB)

    Later, D.W.; Pelroy, R.A.; Wilson, B.W.

    1984-05-01

    Representative process materials were obtained from the EDS pilot plant for chemical and biological analyses. These materials were characterized for biological activity and chemical composition using a microbial mutagenicity assay and chromatographic and mass spectrometric analytical techniques. The two highest boiling distillation cuts, as well as process solvent (PS) obtained from the bottoms recycle mode operation, were tested for initiation of mouse skin tumorigenicity. All three materials were active; the crude 800/sup 0 +/F cut was substantially more potent than the crude bottoms recycle PS or 750 to 800/sup 0/F distillate cut. Results from chemical analyses showed the EDS materials, in general, to be more highly alkylated and have higher hydroaromatic content than analogous SRC II process materials (no in-line process hydrogenation) used for comparison. In the microbial mutagenicity assays the N-PAC fractions showed greater activity than did the aliphatic hydrocarbon, hydroxy-PAH, or PAH fractions, although mutagenicity was detected in certain PAH fractions by a modified version of the standard microbial mutagenicity assay. Mutagenic activities for the EDS materials were lower, overall, than those for the corresponding materials from the SRC II process. The EDS materials produced under different operational modes had distinguishable differences in both their chemical constituency and biological activity. The primary differences between the EDS materials studied here and their SRC II counterparts used for comparison are most likely attributable to the incorporation of catalytic hydrogenation in the EDS process. 27 references, 28 figures, 27 tables.

  1. Correlation of Chemical and Physical Test Data For the Environment Ageing of Coflon (PVDF). Revised

    Science.gov (United States)

    Morgan, G. J.; Campion, R. P.

    1997-01-01

    This report aims to identify correlations between mechanical property changes and chemical/morphological structure changes for Coflon. It is intended both to illustrate the overall methodology and to indicate the testing that needs to be undertaken in order to obtain correlations. Many fluid exposures have now been carried out on Coflon during the project and many data generated as a result. The report summarises the changes observed in mechanical and physical properties and relates these as well as possible to the chemistry thought to be occurring during ageing. For this purpose, data have been collated from already-issued MERL and TRI technical and progress reports. Most of the mechanical testing of aged testpieces has been performed soon after the completion of the exposure; however, there is of necessity a delay in obtaining chemical analysis of the same testpieces, so that more physical than chemical data are shown. Three fluids have so far caused measurable deterioration of Coflon, these being: methanol (Fluid A), a methanol and amine mixture (Fluid G), and a mixture of methane, carbon dioxide gas and hydrogen sulphide gas plus aqueous amine (Fluid F). Only the effects of these fluids will be dealt with in any detail in this report, although other fluids are assessed to give relevant background information. Relevant test data collated here include: tensile modulus and related properties, mode of sample failure at break, fracture toughness, fatigue crack growth rate and resistance, stress relaxation rate, permeation coefficients, % crystallinity and molecular weight distributions together with changes in fluorine levels, and other observations where appropriate. However, not all of these were obtained for every ageing condition. Because of the wide range of tests employed, and the different ways in which their results are obtained, the following section has been included to serve as a background for making comparisons.

  2. Toxicity testing and chemical analyses of recycled fibre-based paper for food contact

    DEFF Research Database (Denmark)

    Binderup, Mona-Lise; Pedersen, Gitte Alsing; Vinggaard, Anne;

    2002-01-01

    Food-contact materials, including paper, have to comply with a basic set of criteria concerning safety. This means that paper for food contact should not give rise to migration of components, which can endanger human health. The objectives of this pilot study were, first, to compare paper of...... different qualities as food-contact materials and to Perform a preliminary evaluation of their suitability from a safety point of view, and, second, to evaluate the use of different in vitro toxicity tests for screening of paper and board. Paper produced from three different categories of recycled fibres (B......-D) and a raw material produced from virgin fibres (A) were obtained from industry, and extracts were examined by chemical analyses and diverse in vitro toxicity test systems. The products tested were either based on different raw materials or different treatments were applied. Paper category B was made...

  3. Test of the universal local pseudopotential for the description of chemical short range order

    International Nuclear Information System (INIS)

    We present the results of a test of the adequacy of the recently proposed universal local electron-ion pseudopotential of Nagueira, Fiolhais and Perdew for the liquid binary alloys with chemical short ran ge order. In order to test, the inter-atomic pair potentials are derived using the second order pseudopotential theory with different electron-ion potentials for liquid Li-Mg all oy as a test ease. The partial structure factors Sij(q) and the concentration-fluctuation structure factor Scc(q) are calculated to analyze the ordering tendencies in this binary alloys. The agreement between theory and experiment is quite good. The results show that the universal version of evanescent pseudopotential predicts a correct description of the structure of liquid Li-Mg alloys

  4. Standard test methods for chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of uranium hexafluoride

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 These test methods cover procedures for subsampling and for chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of uranium hexafluoride UF6. Most of these test methods are in routine use to determine conformance to UF6 specifications in the Enrichment and Conversion Facilities. 1.2 The analytical procedures in this document appear in the following order: Note 1—Subcommittee C26.05 will confer with C26.02 concerning the renumbered section in Test Methods C761 to determine how concerns with renumbering these sections, as analytical methods are replaced with stand-alone analytical methods, are best addressed in subsequent publications. Sections Subsampling of Uranium Hexafluoride 7 - 10 Gravimetric Determination of Uranium 11 - 19 Titrimetric Determination of Uranium 20 Preparation of High-Purity U3O 8 21 Isotopic Analysis 22 Isotopic Analysis by Double-Standard Mass-Spectrometer Method 23 - 29 Determination of Hydrocarbons, Chlorocarbons, and Partially Substitut...

  5. Corrosion test of structural materials for thermo-chemical and electrolytic hybrid hydrogen production cycle

    International Nuclear Information System (INIS)

    Corrosion behavior of structural materials for thermo-chemical and electrolytic hydrogen production cycle was investigated in liquid and gaseous sulfuric acid in the temperature range of 200-500degC. The cycle is one of the hydrogen production methods using sulfuric acid and the maximum temperature through the processes is about 500degC. In this study, corrosion tests of candidate structural materials for equipment of the hydrogen production plant were performed at the conditions each equipment will be used. The concentration of sulfuric acid was 95 mass% in all experiments and maximum test duration was 500 h. Only high Si cast iron had good corrosion resistance in the boiling sulfuric acid, whereas high Si cast iron and Hastelloy C276 had good corrosion resistance in the sulfurous acid gas atmosphere (vaporized sulfuric acid or mixture of sulfur dioxide and water vapor). Furthermore, post test analysis by optical microscope and SEM-EDX were performed. (author)

  6. HRI catalytic two-stage liquefaction (CTSL) process materials: chemical analysis and biological testing

    Energy Technology Data Exchange (ETDEWEB)

    Wright, C.W.; Later, D.W.

    1985-12-01

    This report presents data from the chemical analysis and biological testing of coal liquefaction materials obtained from the Hydrocarbon Research, Incorporated (HRI) catalytic two-stage liquefaction (CTSL) process. Materials from both an experimental run and a 25-day demonstration run were analyzed. Chemical methods of analysis included adsorption column chromatography, high-resolution gas chromatography, gas chromatography/mass spectrometry, low-voltage probe-inlet mass spectrometry, and proton nuclear magnetic resonance spectroscopy. The biological activity was evaluated using the standard microbial mutagenicity assay and an initiation/promotion assay for mouse-skin tumorigenicity. Where applicable, the results obtained from the analyses of the CTSL materials have been compared to those obtained from the integrated and nonintegrated two-stage coal liquefaction processes. 18 refs., 26 figs., 22 tabs.

  7. Group Delphi Workshop on In Silico Methods : successful communication of scientific content on the example of testing chemical substances

    OpenAIRE

    Benighaus, Christina; Renn, Ortwin; Benighaus, Ludger; Hinderer, Nele; Alle, Katrin

    2012-01-01

    The REACH Regulation (Registration, Evaluation, Authorization and Restriction of Chemicals) contains the commitment to minimize the amount of animal testing necessary to achieve its aims. To do this, industry is providing justifications to waive animal tests in preference for in vitro or in silico methods. In silico methods rely on computer simulation or modeling and use results from existing tests to model the ways in which a chemical may be hazardous in the body and/or in the environment. T...

  8. Review and evaluation of literature on testing of chemical additives for scale control in geothermal fluids. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Crane, C.H.; Kenkeremath, D.C.

    1981-01-01

    A selected group of reported tests of chemical additives in actual geothermal fluids are reviewed and evaluated to summarize the status of chemical scale-control testing and identify information and testing needs. The task distinguishes between scale control in the cooling system of a flash plant and elsewhere in the utilization system due to the essentially different operating environments involved. Additives for non-cooling geothermal fluids are discussed by scale type: silica, carbonate, and sulfide.

  9. Significant observations from a PWR steam generator chemical cleaning qualification test program

    International Nuclear Information System (INIS)

    A qualification test program for the chemical cleaning of the secondary side of steam generators was conducted in anticipation of a potential application at Indian Point 2 (IP-2). The sludge removal effectiveness was evaluated using a large-scale test facility and both simulated consolidated sludge samples and sludge removed from IP-2 steam generators during prior sludge lancing. The test also mocked up the weld geometries and locations for an accurate galvanic corrosion assessment. This large-scale test and other preliminary tests had the following three aims: (1) optimize and demonstrate the sludge removal effectiveness of the Electric Power Research Institute/Steam Generator Owners Group (EPRI/SGOG) generic cleaning process for the Westinghouse Model 44 steam generators, (2) determine the corrosion effects of the process on Westinghouse Model 44 steam generator materials that would be exposed to the process, and (3) identify technical issues that should be addressed prior to field implementation of the process. The qualification test program also included the evaluation of an eddy current technique that measures sludge height in the presence of copper (IP-2 sludge contains more than 30 percent copper)

  10. Standard test methods for determining chemical durability of nuclear, hazardous, and mixed waste glasses and multiphase glass ceramics: The product consistency test (PCT)

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2002-01-01

    1.1 These product consistency test methods A and B evaluate the chemical durability of homogeneous glasses, phase separated glasses, devitrified glasses, glass ceramics, and/or multiphase glass ceramic waste forms hereafter collectively referred to as “glass waste forms” by measuring the concentrations of the chemical species released to a test solution. 1.1.1 Test Method A is a seven-day chemical durability test performed at 90 ± 2°C in a leachant of ASTM-Type I water. The test method is static and conducted in stainless steel vessels. Test Method A can specifically be used to evaluate whether the chemical durability and elemental release characteristics of nuclear, hazardous, and mixed glass waste forms have been consistently controlled during production. This test method is applicable to radioactive and simulated glass waste forms as defined above. 1.1.2 Test Method B is a durability test that allows testing at various test durations, test temperatures, mesh size, mass of sample, leachant volume, a...

  11. Chemical Reactivity Testing for the National Spent Nuclear Fuel Program. Quality Assurance Project Plan

    Energy Technology Data Exchange (ETDEWEB)

    Newsom, H.C.

    1999-01-24

    This quality assurance project plan (QAPjP) summarizes requirements used by Lockheed Martin Energy Systems, Incorporated (LMES) Development Division at Y-12 for conducting chemical reactivity testing of Department of Energy (DOE) owned spent nuclear fuel, sponsored by the National Spent Nuclear Fuel Program (NSNFP). The requirements are based on the NSNFP Statement of Work PRO-007 (Statement of Work for Laboratory Determination of Uranium Hydride Oxidation Reaction Kinetics.) This QAPjP will utilize the quality assurance program at Y-12, QA-101PD, revision 1, and existing implementing procedures for the most part in meeting the NSNFP Statement of Work PRO-007 requirements, exceptions will be noted.

  12. Chemical Reactivity Testing for the National Spent Nuclear Fuel Program. Quality Assurance Project Plan

    International Nuclear Information System (INIS)

    This quality assurance project plan (QAPjP) summarizes requirements used by Lockheed Martin Energy Systems, Incorporated (LMES) Development Division at Y-12 for conducting chemical reactivity testing of Department of Energy (DOE) owned spent nuclear fuel, sponsored by the National Spent Nuclear Fuel Program (NSNFP). The requirements are based on the NSNFP Statement of Work PRO-007 (Statement of Work for Laboratory Determination of Uranium Hydride Oxidation Reaction Kinetics.) This QAPjP will utilize the quality assurance program at Y-12, QA-101PD, revision 1, and existing implementing procedures for the most part in meeting the NSNFP Statement of Work PRO-007 requirements, exceptions will be noted

  13. Summer 2012 Testing and Analysis of the Chemical Mixture Methodology -- Part I

    Energy Technology Data Exchange (ETDEWEB)

    Glantz, Clifford S.; Yu, Xiao-Ying; Coggin, Rebekah L.; Ponder, Lashaundra A.; Booth, Alexander E.; Petrocchi, Achille J.; Horn, Sarah M.; Yao, Juan

    2012-07-01

    This report presents the key findings made by the Chemical Mixture Methodology (CMM) project team during the first stage of their summer 2012 testing and analysis of the CMM. The study focused on answering the following questions: o What is the percentage of the chemicals in the CMM Rev 27 database associated with each Health Code Number (HCN)? How does this result influence the relative importance of acute HCNs and chronic HCNs in the CMM data set? o What is the benefit of using the HCN-based approach? Which Modes of Action and Target Organ Effects tend to be important in determining the HCN-based Hazard Index (HI) for a chemical mixture? o What are some of the potential issues associated with the current HCN-based approach? What are the opportunities for improving the performance and/or technical defensibility of the HCN-based approach? How would those improvements increase the benefit of using the HCN-based approach? o What is the Target Organ System Effect approach and how can it be used to improve upon the current HCN-based approach? How does the benefits users would derive from using the Target Organ System Approach compare to the benefits available from the current HCN-based approach?

  14. Animal testing and alternative approaches for the human health risk assessment under the proposed new European chemicals regulation

    Energy Technology Data Exchange (ETDEWEB)

    Hoefer, Thomas; Gerner, Ingrid; Gundert-Remy, Ursula; Liebsch, Manfred; Schulte, Agnes; Spielmann, Horst; Vogel, Richard; Wettig, Klaus [Bundesinstitut fuer Risikobewertung (BfR), Berlin (Germany)

    2004-10-01

    During the past 20 years the EU legislation for the notification of chemicals has focussed on new chemicals and at the same time failed to cover the evaluation of existing chemicals in Europe. Therefore, in a new EU chemicals policy (REACH, Registration, Evaluation and Authorisation of Chemicals) the European Commission proposes to evaluate 30,000 chemicals within a period of 15 years. We are providing estimates of the testing requirements based on our personal experiences during the past 20 years. A realistic scenario based on an in-depth discussion of potential toxicological developments and an optimised ''tailor-made'' testing strategy shows that to meet the goals of the REACH policy, animal numbers may be significantly reduced below 10 million if industry would use in-house data from toxicity testing, which are confidential, if non-animal tests would be used, and if information from quantitative structure activity relationships (QSARs) would be applied in substance-tailored testing schemes. The procedures for evaluating the reproductive toxicity of chemicals have the strongest impact on the total number of animals bred for testing under REACH. We are assuming both an active collaboration with our colleagues in industry and substantial funding of the development and validation of advanced non-animal methods by the EU Commission, specifically in reproductive and developmental toxicity. (orig.)

  15. Animal testing and alternative approaches for the human health risk assessment under the proposed new European chemicals regulation.

    Science.gov (United States)

    Höfer, Thomas; Gerner, Ingrid; Gundert-Remy, Ursula; Liebsch, Manfred; Schulte, Agnes; Spielmann, Horst; Vogel, Richard; Wettig, Klaus

    2004-10-01

    During the past 20 years the EU legislation for the notification of chemicals has focussed on new chemicals and at the same time failed to cover the evaluation of existing chemicals in Europe. Therefore, in a new EU chemicals policy (REACH, Registration, Evaluation and Authorization of Chemicals) the European Commission proposes to evaluate 30,000 chemicals within a period of 15 years. We are providing estimates of the testing requirements based on our personal experiences during the past 20 years. A realistic scenario based on an in-depth discussion of potential toxicological developments and an optimised "tailor-made" testing strategy shows that to meet the goals of the REACH policy, animal numbers may be significantly reduced below 10 million if industry would use in-house data from toxicity testing, which are confidential, if non-animal tests would be used, and if information from quantitative structure activity relationships (QSARs) would be applied in substance-tailored testing schemes. The procedures for evaluating the reproductive toxicity of chemicals have the strongest impact on the total number of animals bred for testing under REACH. We are assuming both an active collaboration with our colleagues in industry and substantial funding of the development and validation of advanced non-animal methods by the EU Commission, specifically in reproductive and developmental toxicity. PMID:15170526

  16. Chemical Kinetics of the TPS and Base Bleeding During Flight Test

    Science.gov (United States)

    Osipov, Viatcheslav; Ponizhovskaya, Ekaterina; Hafiychuck, Halyna; Luchinsky, Dmitry; Smelyanskiy, Vadim; Dagostino, Mark; Canabal, Francisco; Mobley, Brandon L.

    2012-01-01

    The present research deals with thermal degradation of polyurethane foam (PUF) during flight test. Model of thermal decomposition was developed that accounts for polyurethane kinetics parameters extracted from thermogravimetric analyses and radial heat losses to the surrounding environment. The model predicts mass loss of foam, the temperature and kinetic of release of the exhaust gases and char as function of heat and radiation loads. When PUF is heated, urethane bond break into polyol and isocyanate. In the first stage, isocyanate pyrolyses and oxidizes. As a result, the thermo-char and oil droplets (yellow smoke) are released. In the second decomposition stage, pyrolysis and oxidization of liquid polyol occur. Next, the kinetics of chemical compound release and the information about the reactions occurring in the base area are coupled to the CFD simulations of the base flow in a single first stage motor vertically stacked vehicle configuration. The CFD simulations are performed to estimate the contribution of the hot out-gassing, chemical reactions, and char oxidation to the temperature rise of the base flow. The results of simulations are compared with the flight test data.

  17. Enhancing the Benefit of the Chemical Mixture Methodology: A Report on Methodology Testing and Potential Approaches for Improving Performance

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Xiao-Ying; Yao, Juan; He, Hua; Glantz, Clifford S.; Booth, Alexander E.

    2012-01-01

    Extensive testing shows that the current version of the Chemical Mixture Methodology (CMM) is meeting its intended mission to provide conservative estimates of the health effects from exposure to airborne chemical mixtures. However, the current version of the CMM could benefit from several enhancements that are designed to improve its application of Health Code Numbers (HCNs) and employ weighting factors to reduce over conservatism.

  18. Pilot plant SERSE: Description and results of the experimental tests under treatment of simulated chemical liquid waste

    International Nuclear Information System (INIS)

    The chemical processes for the selective separation of the actinides and long lived fission products from aged liquid wastes is described. The SERSE pilot plant is a cold facility which has been designed, by ENEA, for the engineering scale demonstration of the chemical separation processes. The experimental tests carried out in the plant are described and the results confirm the laboratory data. (author)

  19. Standard test methods for chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade plutonium metal

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2004-01-01

    1.1 These test methods cover procedures for the chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade plutonium metal to determine compliance with specifications.

  20. Support to DHS Chemical Detection Field Testing and Countermeasures Studies: Report to Sponsors

    Energy Technology Data Exchange (ETDEWEB)

    Sohn, Michael; Black, Douglas; Delp, William

    2011-09-01

    This document reports on work that Lawrence Berkeley National Laboratory performed to support the Department of Homeland Security's testing of ARFCAM and LACIS systems. In the sections that follow, LBNL lists the scope of work, field analyses conducted, and preliminary results. LBNL developed a model of the Port Gaston building at the Nevada Test Site and calibrated it using data from field experiments, both blower door and tracer gas tests. Model development and comparison to data show very good agreement. The model was developed to (1) support the interpretation of data from field trials performed by Signature Science LLC, (2) support the placement of sampler equipment, and (3) predict if meteorological differences between the Wet-Run/Dry-Run and the Hot-Run might adversely affect the development of the Hot Run Test Plan. LBNL reported its findings on each task to the experiment team at scheduled planning meetings. In the end, we note that the model was used limitedly because the data from the Wet-Run/Dry Run were if such high quality. Lastly, LBNL conducted a research experiment at the end of the Wet-Run/Dry-Run to study if, and to what degree, specific TICs sorb and desorb on indoor surfaces. We found that several of the TICs either sorb onto surfaces or are lost through chemical reactions. These findings may have important implications on determining sheltering-in-place concepts of operation.

  1. Dimethylglycine and chemically related amines tested for mutagenicity under potential nitrosation conditions.

    Science.gov (United States)

    Hoorn, A J

    1989-04-01

    Dimethylglycine (DMG) and the chemically related amino acids glycine, sarcosine (monomethylglycine) and betaine (trimethylglycine) were tested in Salmonella typhimurium strain TA100 after treatment with sodium nitrite under acidic conditions using a modified Ames Salmonella/microsome assay as reported by Colman et al. (1980). The increase in the number of revertants observed both with and without metabolic activation was also induced in the control mixtures without adding the amines. From the subsequent testing of the individual components of the mixtures, we concluded that non-consumed nitrite was responsible for the mutagenic responses observed in the different reaction mixtures, and not the amines themselves. There were no consistent indications of mutagenic activity of the DMG test mixture as compared to the control mixture which exhibited both consistent mutagenic activity and a toxic effect which was not increased by the addition of DMG. In fact, DMG seemed to decrease the toxicity of the control reaction solution to the Salmonella which was clearly observed at the higher doses. DMG cannot be considered mutagenic under the test conditions employed. The same can be said of the other amino acids as well. PMID:2468082

  2. Status Report on the Fabrication of Fuel Cladding Chemical Interaction Test Articles for ATR Irradiations

    International Nuclear Information System (INIS)

    FeCrAl alloys are a promising new class of alloys for light water reactor (LWR) applications due to their superior oxidation and corrosion resistance in high temperature environments. The current R&D efforts have focused on the alloy composition and processing routes to generate nuclear grade FeCrAl alloys with optimized properties for enhanced accident tolerance while maintaining properties needed for normal operation conditions. Therefore, the composition and processing routes must be optimized to maintain the high temperature steam oxidation (typically achieved by increasing the Cr and Al content) while still exhibiting properties conducive to normal operation in a LWR (such as radiation tolerance where reducing Cr content is favorable). Within this balancing act is the addition of understanding the influence on composition and processing routes on the FeCrAl alloys for fuel-cladding chemical interactions (FCCI). Currently, limited knowledge exists on FCCI for the FeCrAl-UO2 clad-fuel system. To overcome the knowledge gaps on the FCCI for the FeCrAl-UO2 clad-fuel system a series of fueled irradiation tests have been developed for irradiation in the Advanced Test Reactor (ATR) housed at the Idaho National Laboratory (INL). The first series of tests has already been reported. These tests used miniaturized 17x17 PWR fuel geometry rodlets of second-generation FeCrAl alloys fueled with industrial Westinghouse UO2 fuel. These rodlets were encapsulated within a stainless steel housing.To provide high fidelity experiments and more robust testing, a new series of rodlets have been developed deemed the Accident Tolerant Fuel Experiment #1 Oak Ridge National Laboratory FCCI test (ATF-1 ORNL FCCI). The main driving factor, which is discussed in detail, was to provide a radiation environment where prototypical fuel-clad interface temperatures are met while still maintaining constant contact between industrial fuel and the candidate cladding alloys, hence promoting FCCI

  3. Status Report on the Fabrication of Fuel Cladding Chemical Interaction Test Articles for ATR Irradiations

    Energy Technology Data Exchange (ETDEWEB)

    Field, Kevin G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Howard, Richard H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-09-28

    FeCrAl alloys are a promising new class of alloys for light water reactor (LWR) applications due to their superior oxidation and corrosion resistance in high temperature environments. The current R&D efforts have focused on the alloy composition and processing routes to generate nuclear grade FeCrAl alloys with optimized properties for enhanced accident tolerance while maintaining properties needed for normal operation conditions. Therefore, the composition and processing routes must be optimized to maintain the high temperature steam oxidation (typically achieved by increasing the Cr and Al content) while still exhibiting properties conducive to normal operation in a LWR (such as radiation tolerance where reducing Cr content is favorable). Within this balancing act is the addition of understanding the influence on composition and processing routes on the FeCrAl alloys for fuel-cladding chemical interactions (FCCI). Currently, limited knowledge exists on FCCI for the FeCrAl-UO2 clad-fuel system. To overcome the knowledge gaps on the FCCI for the FeCrAl-UO2 clad-fuel system a series of fueled irradiation tests have been developed for irradiation in the Advanced Test Reactor (ATR) housed at the Idaho National Laboratory (INL). The first series of tests has already been reported. These tests used miniaturized 17x17 PWR fuel geometry rodlets of second-generation FeCrAl alloys fueled with industrial Westinghouse UO2 fuel. These rodlets were encapsulated within a stainless steel housing.To provide high fidelity experiments and more robust testing, a new series of rodlets have been developed deemed the Accident Tolerant Fuel Experiment #1 Oak Ridge National Laboratory FCCI test (ATF-1 ORNL FCCI). The main driving factor, which is discussed in detail, was to provide a radiation environment where prototypical fuel-clad interface temperatures are met while still maintaining constant contact between industrial fuel and the candidate cladding alloys

  4. Internal Treatment of Process Waters in Paper Production by Dissolved Air Flotation with Newly Developed Chemicals. 1. Laboratory Tests

    OpenAIRE

    Miranda Carreño, Rubén; Negro Álvarez, Carlos Manuel; Blanco Suárez, Ángeles

    2009-01-01

    New chemicals, based on the synergistic effect between inorganic polyaluminium salts and organic cationic polyelectrolytes, have been tested for the chemical optimization of a dissolved air flotation (DAF) unit, used as internal treatment of process waters in a paper mill based on 100% recovered paper. Laboratory tests have demonstrated that polyamine modifications of the aluminum salts are the most efficient in the removal of contaminants, the combination of a polyaluminium nitrate sulfate s...

  5. An evaluation of chemical screening test kits for lead in paint

    Energy Technology Data Exchange (ETDEWEB)

    Oglesby, L.S.

    1996-04-01

    The Residential Lead-Based Paint Hazard Reduction Act (Title X) requires abatement and management of lead-based paint. The purpose of this study was to evaluate three chemical screening test kits using materials and methods from one study and subjecting the results to the statistical analysis of another. The three kits were used to predict the presence of lead in paint at ten weight concentrations from 0.04 to 3.97%. Paint was applied to four wood boards yielding a sample size of 40. Four boards were painted with lead-free paint and used as blanks. All of the boards were tested with the three test kits by an untrained individual having no knowledge of the actual lead content. Sensitivity, specificity, and false positive and negative rates were calculated for the test kit results. The manufactures` detection limits, the observed sensitivity ranged from 1.00 to 0.80, specificity ranged from 1.00 to 0.42, false positive ranged from 0 to 58%, and false negatives ranged from 0 to 20%. At the 0.5% Federal threshold level, the observed sensitivity ranged from 1.00 to 0.94, specificity ranged from 1.00 to 0.5, false positives ranged from 0 to 11.1%, and false negatives ranged from 0 to 20%. The observed false positive and false negative rates for all three kits were found to be significantly lower than those reported in a previous study. These results indicate that the kits perform very well at the Federal threshold, with two of the kits having false negative rates below 12.5% and false positive rates of 3.13%. These results indicate that these two kits would probably be acceptable screening tests for lead in paint.

  6. [Chemical tests with Marrubium species. Official data on Marubii herba in Pharmacopoeia Hungarica VII].

    Science.gov (United States)

    Telek, E; Tõth, L; Botz, L; Máthé, I

    1997-01-01

    About 40 species of the Marrubium genus (Lamiaceae) are known of which 2 species (M. vulgare L. and M. peregrinum L.) and one hybrid (M. x paniculatum Desr.) can be found as native plants in Hungary. The above-ground parts of M. vulgare L. are official in Hungarian Pharmacopoeia VII. Active substances in Marrubii herba are labdane-structured bitter materials. Although the presence of furanic labdane diterpenes in the plant is known, the pharmacopoeia gives only microscopic tests, qualitative tests (for other parts of the plant and foreign organic matter) for the bitter value of Marrubii herba. We have examined the main terpenoid substances isolated with column, gel and preparative layer chromatography. Structure elucidations were performed by means of UV, mass and NMR spectroscopy. We have compared the changes in terpenoid-type compounds (premarrubiin and marrubiin) in plants during the vegetation period; in different Marrubium species and in the different extractions of horehound by means of thin layer chromatography and densitometry. By reason of our results we propose qualitative and quantitative chemical tests for the paragraph of Marrubii herba in Pharmacopoeia Hungarica VII. PMID:9163258

  7. DEPOSITION TANK CORROSION TESTING FOR ENHANCED CHEMICAL CLEANING POST OXALIC ACID DESTRUCTION

    Energy Technology Data Exchange (ETDEWEB)

    Mickalonis, J.

    2011-08-29

    An Enhanced Chemical Cleaning (ECC) process is being developed to aid in the high level waste tank closure at the Savannah River Site. The ECC process uses an advanced oxidation process (AOP) to destroy the oxalic acid that is used to remove residual sludge from a waste tank prior to closure. The AOP process treats the dissolved sludge with ozone to decompose the oxalic acid through reactions with hydroxyl radicals. The effluent from this oxalic acid decomposition is to be sent to a Type III waste tank and may be corrosive to these tanks. As part of the hazardous simulant testing that was conducted at the ECC vendor location, corrosion testing was conducted to determine the general corrosion rate for the deposition tank and to assess the susceptibility to localized corrosion, especially pitting. Both of these factors impact the calculation of hydrogen gas generation and the structural integrity of the tanks, which are considered safety class functions. The testing consisted of immersion and electrochemical testing of A537 carbon steel, the material of construction of Type III tanks, and 304L stainless steel, the material of construction for transfer piping. Tests were conducted in solutions removed from the destruction loop of the prototype ECC set up. Hazardous simulants, which were manufactured at SRNL, were used as representative sludges for F-area and H-area waste tanks. Oxalic acid concentrations of 1 and 2.5% were used to dissolve the sludge as a feed to the ECC process. Test solutions included the uninhibited effluent, as well as the effluent treated for corrosion control. The corrosion control options included mixing with an inhibited supernate and the addition of hydroxide. Evaporation of the uninhibited effluent was also tested since it may have a positive impact on reducing corrosion. All corrosion testing was conducted at 50 C. The uninhibited effluent was found to increase the corrosion rate by an order of magnitude from less than 1 mil per year (mpy

  8. CORROSION TESTING OF CARBON STEEL IN OXALIC ACID CHEMICAL CLEANING SOLUTIONS

    Energy Technology Data Exchange (ETDEWEB)

    Wiersma, B.; Mickalonis, J.; Subramanian, K.; Ketusky, E.

    2011-10-14

    Radioactive liquid waste has been stored in underground carbon steel tanks for nearly 60 years at the Savannah River Site. The site is currently in the process of removing the waste from these tanks in order to place it into vitrified, stable state for longer term storage. The last stage in the removal sequence is a chemical cleaning step that breaks up and dissolves metal oxide solids that cannot be easily pumped out of the tank. Oxalic acid has been selected for this purpose because it is an effective chelating agent for the solids and is not as corrosive as other acids. Electrochemical and immersion studies were conducted to investigate the corrosion behavior of carbon steel in simulated chemical cleaning environments. The effects of temperature, agitation, and the presence of sludge solids in the oxalic acid on the corrosion rate and the likelihood of hydrogen evolution were determined. The testing showed that the corrosion rates decreased significantly in the presence of the sludge solids. Corrosion rates increased with agitation, however, the changes were less noticeable.

  9. Chemical reactivity testing for the National Spent Nuclear Fuel Program. Revision 2

    International Nuclear Information System (INIS)

    This quality assurance project plan (QAPjP) summarizes requirements used by Lockheed Martin Energy Systems, Incorporated (LMES) Development Division at Y-12 for conducting chemical reactivity testing of Department of Energy (DOE) owned spent nuclear fuel, sponsored by the National Spent Nuclear Fuel Program (NSNFP). The requirements are based on the NSNFP Statement of work PRO-007 (Statement of Work for Laboratory Determination of Uranium Hydride Oxidation Reaction Kinetics.) This QAPjP will utilize the quality assurance program at Y-12, Y60-101PD, Quality Program Description, and existing implementing procedures for the most part in meeting the NSNFP Statement of Work PRO-007 requirements, exceptions will be noted. The project consists of conducting three separate series of related experiments, ''Passivation of Uranium Hydride Powder With Oxygen and Water'', ''Passivation of Uranium Hydride Powder with Surface Characterization'', and ''Electrochemical Measure of Uranium Hydride Corrosion Rate''

  10. Principles of Single-Laboratory Validation of Analytical Methods for Testing the Chemical Composition of Pesticides

    International Nuclear Information System (INIS)

    Underlying theoretical and practical approaches towards pesticide formulation analysis are discussed, i.e. general principles, performance characteristics, applicability of validation data, verification of method performance, and adaptation of validated methods by other laboratories. The principles of single laboratory validation of analytical methods for testing the chemical composition of pesticides are outlined. Also the theoretical background is described for performing pesticide formulation analysis as outlined in ISO, CIPAC/AOAC and IUPAC guidelines, including methodological characteristics such as specificity, selectivity, linearity, accuracy, trueness, precision and bias. Appendices I–III hereof give practical and elaborated examples on how to use the Horwitz approach and formulae for estimating the target standard deviation towards acceptable analytical repeatability. The estimation of trueness and the establishment of typical within-laboratory reproducibility are treated in greater detail by means of worked-out examples. (author)

  11. Standard test methods for chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade boron carbide

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2004-01-01

    1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade boron carbide powder and pellets to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Total Carbon by Combustion and Gravimetry 7-17 Total Boron by Titrimetry 18-28 Isotopic Composition by Mass Spectrometry 29-38 Chloride and Fluoride Separation by Pyrohydrolysis 39-45 Chloride by Constant-Current Coulometry 46-54 Fluoride by Ion-Selective Electrode 55-63 Water by Constant-Voltage Coulometry 64-72 Impurities by Spectrochemical Analysis 73-81 Soluble Boron by Titrimetry 82-95 Soluble Carbon by a Manometric Measurement 96-105 Metallic Impurities by a Direct Reader Spectrometric Method 106-114

  12. A field-scale test of in situ chemical oxidation through recirculation

    International Nuclear Information System (INIS)

    In situ chemical oxidation is a developing class of remediation technologies in which organic contaminants are degraded in place by powerful oxidants. Successful implementation of this technology requires an effective means for dispersing the oxidant to contaminated regions in the subsurface. An oxidant delivery technique has been developed wherein the treatment solution is made by adding an oxidant to extracted groundwater. The oxidant-laden groundwater is then injected and recirculated into a contaminated aquifer through multiple horizontal and/or vertical wells. This technique, referred to as in situ chemical oxidation through recirculation (ISCOR), can be applied to saturated and hydraulically conductive formations and used with relatively stable oxidants such as potassium permanganate (KMnO4). A field-scale test of ISCOR was conducted at a site (Portsmouth Gaseous Diffusion Plant) where groundwater in a 5-ft thick silty gravel aquifer is contaminated with trichloroethylene (TCE) at levels that indicate the presence of residual dense non-aqueous phase liquids (DNAPLs). The field test was implemented using a pair of parallel horizontal wells with 200-ft screened sections. For approximately one month, groundwater was extracted from one horizontal well, dosed with crystalline KMnO4, and re-injected into the other horizontal well 90 ft away. Post-treatment characterization showed that ISCOR was effective at removing TCE in the saturated region. Lateral and vertical heterogeneities within the treatment zone impacted the uniform delivery of the oxidant solution. However, TCE was not detected in groundwater samples collected from monitoring wells and soil samples from borings in locations where the oxidant had permeated

  13. A field-scale test of in situ chemical oxidation through recirculation

    Energy Technology Data Exchange (ETDEWEB)

    West, O.R.; Cline, S.R.; Holden, W.L.; Gardner, F.G.; Schlosser, B.M. [Oak Ridge National Lab., TN (United States); Siegrist, R.L. [Colorado School of Mines, Golden, CO (United States); Houk, T.C. [Bechtel-Jacobs, Piketon, OH (United States). Portsmouth Gaseous Diffusion Plant

    1998-09-01

    In situ chemical oxidation is a developing class of remediation technologies in which organic contaminants are degraded in place by powerful oxidants. Successful implementation of this technology requires an effective means for dispersing the oxidant to contaminated regions in the subsurface. An oxidant delivery technique has been developed wherein the treatment solution is made by adding an oxidant to extracted groundwater. The oxidant-laden groundwater is then injected and recirculated into a contaminated aquifer through multiple horizontal and/or vertical wells. This technique, referred to as in situ chemical oxidation through recirculation (ISCOR), can be applied to saturated and hydraulically conductive formations and used with relatively stable oxidants such as potassium permanganate (KMnO{sub 4}). A field-scale test of ISCOR was conducted at a site (Portsmouth Gaseous Diffusion Plant) where groundwater in a 5-ft thick silty gravel aquifer is contaminated with trichloroethylene (TCE) at levels that indicate the presence of residual dense non-aqueous phase liquids (DNAPLs). The field test was implemented using a pair of parallel horizontal wells with 200-ft screened sections. For approximately one month, groundwater was extracted from one horizontal well, dosed with crystalline KMnO{sub 4}, and re-injected into the other horizontal well 90 ft away. Post-treatment characterization showed that ISCOR was effective at removing TCE in the saturated region. Lateral and vertical heterogeneities within the treatment zone impacted the uniform delivery of the oxidant solution. However, TCE was not detected in groundwater samples collected from monitoring wells and soil samples from borings in locations where the oxidant had permeated.

  14. Chemical speciation of U, Fe, and Pu in melt glass from nuclear weapons testing

    Science.gov (United States)

    Pacold, J. I.; Lukens, W. W.; Booth, C. H.; Shuh, D. K.; Knight, K. B.; Eppich, G. R.; Holliday, K. S.

    2016-05-01

    Nuclear weapons testing generates large volumes of glassy materials that influence the transport of dispersed actinides in the environment and may carry information on the composition of the detonated device. We determine the oxidation state of U and Fe (which is known to buffer the oxidation state of actinide elements and to affect the redox state of groundwater) in samples of melt glass collected from three U.S. nuclear weapons tests. For selected samples, we also determine the coordination geometry of U and Fe, and we report the oxidation state of Pu from one melt glass sample. We find significant variations among the melt glass samples and, in particular, find a clear deviation in one sample from the expected buffering effect of Fe(II)/Fe(III) on the oxidation state of uranium. In the first direct measurement of Pu oxidation state in a nuclear test melt glass, we obtain a result consistent with existing literature that proposes Pu is primarily present as Pu(IV) in post-detonation material. In addition, our measurements imply that highly mobile U(VI) may be produced in significant quantities when melt glass is quenched rapidly following a nuclear detonation, though these products may remain immobile in the vitrified matrices. The observed differences in chemical state among the three samples show that redox conditions can vary dramatically across different nuclear test conditions. The local soil composition, associated device materials, and the rate of quenching are all likely to affect the final redox state of the glass. The resulting variations in glass chemistry are significant for understanding and interpreting debris chemistry and the later environmental mobility of dispersed material.

  15. TREATMENT TANK OFF-GAS TESTING FOR THE ENHANCED CHEMICAL CLEANING PROCESS

    Energy Technology Data Exchange (ETDEWEB)

    Wiersma, B.

    2011-08-29

    The purpose of this activity was to provide a bounding estimate of the volume of hydrogen gas generated during Enhanced Chemical Cleaning (ECC) of residual sludge remaining in a Type I or Type II treatment tank as well as to provide results independent of the sludge volume in the waste tank to be cleaned. Previous testing to support Chemical Cleaning was based on a 20:1 oxalic acid to sludge ratio. Hydrogen gas evolution is the primary safety concern. Sealed vessel coupon tests were performed to estimate the hydrogen generation rate due to corrosion of carbon steel by 2.5 wt.% oxalic acid. These tests determined the maximum instantaneous hydrogen generation rate, the rate at which the generation rate decays, and the total hydrogen generated. These values were quantified based on a small scale methodology similar to the one described in WSRC-STI-2007-00209, Rev. 0. The measured rates support identified Safety Class functions. The tests were performed with ASTM A285 Grade C carbon steel coupons. Bounding conditions were determined for the solution environment. The oxalic acid concentration was 2.5 wt.% and the test temperature was 75 C. The test solution was agitated and contained no sludge simulant. Duplicate tests were performed and showed excellent reproducibility for the hydrogen generation rate and total hydrogen generated. The results showed that the hydrogen generation rate was initially high, but decayed rapidly within a couple of days. A statistical model was developed to predict the instantaneous hydrogen generation rate as a function of exposure time by combining both sets of data. An upper bound on the maximum hydrogen generation rate was determined from the upper 95% confidence limit. The upper bound confidence limit for the hydrogen generation rate is represented by the following equation. ln (G{sub v}) = -8.22-0.0584 t + 0.0002 t{sup 2}. This equation should be utilized to estimate the instantaneous hydrogen generation rate per unit surface area, G

  16. Using Alternative Approaches to Prioritize Testing for the Universe of Chemicals with Potential for Human Exposure (WC9)

    Science.gov (United States)

    One use of alternative methods is to target animal use at only those chemicals and tests that are absolutely necessary. We discuss prioritization of testing based on high-throughput screening assays (HTS), QSAR modeling, high-throughput toxicokinetics (HTTK), and exposure modelin...

  17. A scientific and animal welfare assessment of the OECD Health Effects Test Guidelines for the safety testing of chemicals under the European Union REACH system.

    Science.gov (United States)

    Combes, Robert; Gaunt, Ian; Balls, Michael

    2006-03-01

    We have assessed each of the OECD Health Effects Test Guidelines (TGs) that were included in an annex to the Internet consultation issued by the European Commission relating to the Registration, Evaluation and Authorisation of Chemicals (REACH) legislation for the testing of new and existing chemical substances. Each guideline has been analysed with respect to its design and its scientific and animal welfare implications, the extent to which it makes use of modern techniques, and its suitability to be used in the REACH system for the testing of large numbers of chemicals. The scientific basis of the test and its justification are considered, as well as the numbers of animals required, and the potential adverse effects on them. The prospects and possibilities for applying the Three Rs (reduction, refinement and replacement) to each of the TGs are also discussed. We have proposed an overall testing strategy for how these TGs and other methods could best be deployed for chemicals testing, should it be necessary to fill data gaps. Certain TGs have been omitted from the strategy, when we have considered them to be unnecessary for chemicals testing. A series of recommendations has been made for improving the TGs with regard to both their scientific content and ways in which they could be better designed in relation to optimising the use of the animals concerned, and minimising adverse welfare consequences to them. Our investigations show that there is an urgent need to update the TGs to reflect modern techniques and methods, and to use current approaches for applying refinement strategies to improve the scientific and animal welfare aspects of the procedures used. Improvements can and should be made in all aspects of toxicity testing, from sample preparation, and animal housing, care and feeding, to dose formulation, test material administration, and the histopathological and clinical analysis of tissue samples. Opportunities for streamlining individual assays are very

  18. Consequences of New Approach to Chemical Stability Tests to Active Pharmaceutical Ingredients.

    Science.gov (United States)

    Jamrógiewicz, Marzena

    2016-01-01

    There is a great need of broaden look on stability tests of active pharmaceutical ingredients (APIs) in comparison with current requirements contained in pharmacopeia. By usage of many modern analytical methods the conception of monitoring the changes of APIs during initial stage of their exposure to harmful factors has been developed. New knowledge must be acquired in terms of identification of each degradation products, especially volatile ones. Further research as toxicology prediction during in silico studies of determined and identified degradation products is necessary. In silico methods are known as computational toxicology or computer-assisted technologies which are used for predicting toxicology of pharmaceutical substances such as impurities or degradation products. This is a specialized software and databases intended to calculate probability of genotoxicity or mutagenicity of these substances through a chemical structure-based screening process and algorithm specific to a given software program. Applying of new analytical approach is proposed as the usage of PAT tools, XRD, HS-SPME GC-MS/MS, LC-MS/MS for stability testing. Described improvements should be taken into account in case of each drug existing already in the market as well as being implemented as new one. PMID:26955356

  19. Development of high-throughput yeast-cell-based bioreporter assays for specific monitoring of bisphenol A and chemical testing of endocrine disrupting compounds

    OpenAIRE

    RajasÀrkkÀ, Johanna

    2013-01-01

    Chemicalization of the modern society has become a topic of debate in the past few decades. Especially chemicals that affect the human reproduction and hormonal system, the so-called endocrine disrupting compounds, have raised concern in public and regulatory agencies. There is a growing need for suitable testing methods to screen endocrine disrupting potential of new and old chemicals. While the European Union chemical legislation REACH has increased the need of chemical testing methods, one...

  20. Transition towards replacing animal tests in safety assessment of cosmetics and chemicals: a combined TIS-MLP framework

    OpenAIRE

    Kooijman, M.; van der Meer, P.; Moors, E.H.M.; Schellekens, H; Hekkert, M.P.

    2012-01-01

    The urgency of the transition to replace animal tests in safety assessment of chemicals and cosmetics was triggered by societal resistance to animal testing (Rowan, 2007) and the scientific dispute concerning the value of animal testing (Olson et al., 2000). Since the 1980s the European Union (EU) has been developing policies to reduce an-imal studies. However, these policies have not been very successful, since only a few regulatory safety assessments in animals (among which the Draize eye t...

  1. FT-IR Analysis of Urinary Stones: A Helpful Tool for Clinician Comparison with the Chemical Spot Test

    OpenAIRE

    Aniello Primiano; Silvia Persichilli; Giovanni Gambaro; Pietro Manuel Ferraro; Alessandro D’Addessi; Andrea Cocci; Arcangelo Schiattarella; Cecilia Zuppi; Jacopo Gervasoni

    2014-01-01

    Background. Kidney stones are a common illness with multifactorial etiopathogenesis. The determination of crystalline and molecular composition and the quantification of all stone components are important to establish the etiology of stones disease but it is often laborious to obtain using the chemical method. The aim of this paper is to compare chemical spot test with FT-IR spectroscopy, for a possible introduction in our laboratory. Methods. We analyzed 48 calculi using Urinary Calculi Anal...

  2. Materials and boiler rig testing to support chemical cleaning of once-through AGR boilers

    Energy Technology Data Exchange (ETDEWEB)

    Tice, D.R.; Platts, N.; Raffel, A.S. [Serco Assurance (United Kingdom); Rudge, A. [British Energy Generation Ltd. (United Kingdom)

    2002-07-01

    An extensive programme of work has been carried out to evaluate two candidate inhibited cleaning solutions for possible implementation on plant, which would be the first chemical clean of an AGR boiler. The two candidate cleaning solutions considered were a Stannine-inhibited citric acid/formic acid mixture (GOM106) and inhibited hydrofluoric acid. Citric acid-based cleaning processes are widely used within the UK Power Industry. The GOM106 solution, comprising a mixture of 3% citric acid, 0.5% formic acid and 0.05% Stannine LTP inhibitor, buffered with ammonia to pH 3.5, was developed specifically for the AGR boilers during the 1970's. Although a considerable amount of materials testing work was carried out by British Energy's predecessor companies to produce a recommended cleaning procedure there were some remaining concerns with the use of GOM106, from these earlier studies, for example, an increased risk of pitting attack associated with the removal of thick 9Cr oxide deposits and a risk of unacceptable damage in critical locations such as the upper transition joints and other weld locations. Hence, additional testing was still required to validate the solution for use on plant. Inhibited hydrofluoric acid (HFA) was also evaluated as an alternative reagent to GOM106. HFA has been used extensively for cleaning mild and low'alloy steel boiler tubes in fossil-fired plant in the UK and elsewhere in Europe and is known to remove oxide quickly. Waste treatment is also easier than for the GOM106 process and some protection against damage to the boiler tube materials is provided by complexing of fluoride with ferric ion. Validation of the potential reagents and inhibitors was achieved by assessing the rate and effectiveness of oxide removal from specimens of helical boiler tubing and welds, together with establishing the extent of any metal loss or localised damage. The initial materials testing resulted in the inhibited ammoniated citric / formic acid

  3. Materials and boiler rig testing to support chemical cleaning of once-through AGR boilers

    International Nuclear Information System (INIS)

    An extensive programme of work has been carried out to evaluate two candidate inhibited cleaning solutions for possible implementation on plant, which would be the first chemical clean of an AGR boiler. The two candidate cleaning solutions considered were a Stannine-inhibited citric acid/formic acid mixture (GOM106) and inhibited hydrofluoric acid. Citric acid-based cleaning processes are widely used within the UK Power Industry. The GOM106 solution, comprising a mixture of 3% citric acid, 0.5% formic acid and 0.05% Stannine LTP inhibitor, buffered with ammonia to pH 3.5, was developed specifically for the AGR boilers during the 1970's. Although a considerable amount of materials testing work was carried out by British Energy's predecessor companies to produce a recommended cleaning procedure there were some remaining concerns with the use of GOM106, from these earlier studies, for example, an increased risk of pitting attack associated with the removal of thick 9Cr oxide deposits and a risk of unacceptable damage in critical locations such as the upper transition joints and other weld locations. Hence, additional testing was still required to validate the solution for use on plant. Inhibited hydrofluoric acid (HFA) was also evaluated as an alternative reagent to GOM106. HFA has been used extensively for cleaning mild and low'alloy steel boiler tubes in fossil-fired plant in the UK and elsewhere in Europe and is known to remove oxide quickly. Waste treatment is also easier than for the GOM106 process and some protection against damage to the boiler tube materials is provided by complexing of fluoride with ferric ion. Validation of the potential reagents and inhibitors was achieved by assessing the rate and effectiveness of oxide removal from specimens of helical boiler tubing and welds, together with establishing the extent of any metal loss or localised damage. The initial materials testing resulted in the inhibited ammoniated citric / formic acid reagent being

  4. Standard test methods for chemical and mass spectrometric analysis of nuclear-grade gadolinium oxide (Gd2O3) powder

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2006-01-01

    1.1 These test methods cover procedures for the chemical and mass spectrometric analysis of nuclear-grade gadolinium oxide powders to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Carbon by Direct CombustionThermal Conductivity C1408 Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method Total Chlorine and Fluorine by Pyrohydrolysis Ion Selective Electrode C1502 Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide Loss of Weight on Ignition 7-13 Sulfur by CombustionIodometric Titration Impurity Elements by a Spark-Source Mass Spectrographic C761 Test Methods for Chemical, Mass Spectrometric, Spectrochemical,Nuclear, and Radiochemical Analysis of Uranium Hexafluoride C1287 Test Method for Determination of Impurities In Uranium Dioxide By Inductively Coupled Plasma Mass Spectrometry Gadolinium Content in Gadolinium Oxid...

  5. Verifying of endocrine disruptor chemical affect to the mouse testes: can raman spectroscopy support histology study?

    Science.gov (United States)

    Andriana, Bibin B.; Oshima, Yusuke; Takanezawa, Sota; Tay, Tat W.; Rosawati Soeratman, Catherine Linda; Alam, Mohammad S.; Mitsuoka, Hiroki; Zhu, Xiao B.; Suzuki, Toshiaki; Yamamoto, Yuko S.; Tsunekawa, Naoki; Kanai, Yoshiakira; Kurohmaru, Masamichi; Sato, Hidetoshi

    2009-02-01

    One of suspect environmental endocrine disruptors that affect mouse male reproduction by altering the morphology of Sertoli cells and spermatogenic cells is phthalate. The effects of mono(2-ethylhexyl)phthalate (MEHP), one of metabolites of di(2-ethylhexyl)phthalate , on immature mouse testes in vivo were examined. We have recently shown that MEHP induced Sertoli cells necrosis and spermatogenic cells apoptosis in mice by TUNEL method, F-actin staining, and ultrastructural study, but there is no data for biochemical changing of testes due to those methods could not explore. To verify in detail of it, we conducted Raman spectroscopy study with 785 nm wavelength laser line, 50mW of laser power and 3 minutes of exposure time to analysis the MEHP-treated testicular tissue, which has been fixatived by 4% paraformaldehyde (PFA). Five weeks old (5 w.o) male mice were used in this experiment. As the results, the alterations were observed by Raman spectroscopy that there are significantly differences of DNA, actin filament, type IV collagen and amide I between control group (0 μM MEHP) and treatment group (100 μM MEHP). These results significantly support histology staining observation (such as the apoptotic spermatogenic cells which is associated with DNA fragmentation and F-actin disruption) and ultrastructural observation (such as mitochondria rupture and disintegration of nucleus membrane). Raman spectroscopy can be used for 4% PFA-fixatived tissue observation. However, we recommend that Raman spectroscopy may be able to be expanded as an armamentarium not just for the clarification of histology staining and ultrastructural study, but furthermore, it may be as a non-invasion assessment for screening animal tissue toxicity of chemical in future.

  6. Test Methods for Evaluating Solid Waste, Physical/Chemical Methods. First Update. (3rd edition)

    International Nuclear Information System (INIS)

    The proposed Update is for Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846, Third Edition. Attached to the report is a list of methods included in the proposed update indicating whether the method is a new method, a partially revised method, or a totally revised method. Do not discard or replace any of the current pages in the SW-846 manual until the proposed update I package is promulgated. Until promulgation of the update package, the methods in the update package are not officially part of the SW-846 manual and thus do not carry the status of EPA-approved methods. In addition to the proposed Update, six finalized methods are included for immediate inclusion into the Third Edition of SW-846. Four methods, originally proposed October 1, 1984, will be finalized in a soon to be released rulemaking. They are, however, being submitted to subscribers for the first time in the update. These methods are 7211, 7381, 7461, and 7951. Two other methods were finalized in the 2nd Edition of SW-846. They were inadvertantly omitted from the 3rd Edition and are not being proposed as new. These methods are 7081 and 7761

  7. Standard test methods for chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade plutonium nitrate solutions

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 These test methods cover procedures for the chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade plutonium nitrate solutions to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Plutonium by Controlled-Potential Coulometry Plutonium by Amperometric Titration with Iron(II) Plutonium by Diode Array Spectrophotometry Free Acid by Titration in an Oxalate Solution 8 to 15 Free Acid by Iodate Precipitation-Potentiometric Titration Test Method 16 to 22 Uranium by Arsenazo I Spectrophotometric Test Method 23 to 33 Thorium by Thorin Spectrophotometric Test Method 34 to 42 Iron by 1,10-Phenanthroline Spectrophotometric Test Method 43 to 50 Impurities by ICP-AES Chloride by Thiocyanate Spectrophotometric Test Method 51 to 58 Fluoride by Distillation-Spectrophotometric Test Method 59 to 66 Sulfate by Barium Sulfate Turbidimetric Test Method 67 to 74 Isotopic Composition by Mass Spectrom...

  8. Monitoring of surface chemical and underground nuclear explosions with help of ionospheric radio-sounding above test site

    International Nuclear Information System (INIS)

    We describe the basic principles, advantages and disadvantages of ionospheric method to monitor surface chemical and underground nuclear explosions. The ionosphere is 'an apparatus' for the infra-sound measurements immediately above the test site. Using remote radio sounding of the ionosphere you can obtain that information. So you carry out the inspection at the test site. The main disadvantage of the ionospheric method is the necessity to sound the ionosphere with radio waves. (author)

  9. 77 FR 32633 - Approval of Test Marketing Exemptions for Certain New Chemicals

    Science.gov (United States)

    2012-06-01

    ..., 2010 (75 FR 71692) (FRL-8852-1). Applicant: Cytec Industries, Inc. Chemical: (G) Alkyl dioic acid... Receipt: April 15, 2011 (76 FR 21343) (FRL-8869-4). Applicant: Cytec Industries, Inc. Chemical: (G...-0003. Date of Receipt: December 13, 2010. Notice of Receipt: April 15, 2011 (76 FR 21344)...

  10. Developing in silico approaches to chemical prioritization for ED testing within an AOP context

    Science.gov (United States)

    The EPA, ORD aquatic toxicology lab in Duluth has been developing predictive toxicity models for use in risk assessment of data poor industrial chemicals since the 1980s. More recently a QSAR-based expert system was developed to prioritize among thousands of chemicals the EPA mus...

  11. Chemical tracer test to identify main condenser dogbone seal leakage at Peach Bottom Unit 3

    International Nuclear Information System (INIS)

    Peach Bottom Unit 3 is a BWR-4 with electrical and thermal power ratings of 1159 MWe and 3514 MWth, respectively. The three low pressure turbines are connected to the associated condensers with dogbone seals (rubber belt expansion joints). The external surface of each expansion joint is surrounded by a trough that is filled with water to form a seal. The demineralized seal water supply is common to all three troughs. Based on offgas flow rate, it was determined that air in-leakage to the condensers had increased to greater than 70 scfm (119 scmh) during the time leading up to refueling outage (RFO) 17. The dogbone seals on Peach Bottom 3 were demanding about 25 gpm (95 lpm) just to maintain constant seal water level, which indicated significant in-leakage of seal water and air. This was a large operational challenge since in-leakage of demineralized water resulted in a continuous Condensate Storage Tank (CST) level decrease and a demand on the demineralized water plant. Increasing the seal water flow to the expansion joint water seals was found to decrease condenser air in-leakage, confirming that one or more of the expansion joints was allowing air to leak into the condensers. The seals are not accessible for inspection during plant operation. The use of a gas (e.g., helium, sulfur hexafluoride) confirmed air in-leakage, but this technique could not identify which of the individual seals were leaking. The plant was planning to replace the 'A' dogbone, but needed to know if more than one seal was leaking in order to plan and prioritize work and to avoid entering the new operating cycle with continued seal leakage. Uncorrected seal leakage could have resulted in a forced outage due to excessive air in-leakage. A chemical tracer test (potentially a 'first of a kind' in BWRs) was developed and implemented to identify the leaking dogbone seal(s) prior to the RFO. The method consisted of injecting a sodium carbonate solution, using commercially

  12. In vitro OECD test methods applied to screen the estrogenic effect of chemicals, used in Korea.

    Science.gov (United States)

    Lee, Hee-Seok; Park, Eun-Jung; Han, Songyi; Oh, Gyeong-Yong; Kim, Min-Hee; Kang, Hui-Seung; Suh, Jin-Hyang; Oh, Jae-Ho; Lee, Kwang-Soo; Hwang, Myung-Sil; Moon, Guiim; Hong, Jin-Hwan; Hwang, In-Gyun

    2016-09-01

    In this study, 27 chemicals found in household products, which became an issue in Korea were screened for the agonistoc and antagonistic effects against human estrogen receptor using official Organization for Economic Cooperation and Development (OECD) in vitro assays, STTA assay using ERα-HeLa-9903 cell line and BG1Luc ER TA assay. In the case of human ER agonist screening by two assays, all tested chemicals did not show agonist effect against ER. In ER antagonist test by BG1Luc ER TA assay, five surfactants α-dodecyl-ω-hydroxypoly(oxyethylene), alcohols C16-18 ethoxylated, nonylphenol, ethoxylated, 3,6,9,12,15,18,21-heptaoxatritriacontan-1-ol, and α-dodecyl-ω-hydroxypoly(oxy-1,2-ethanediyl)) were found to exhibit weak antagonistic activities. The agonist/antagonist effects against human estrogen receptor of various chemicals, used in Korea by OECD test guideline are reported in this study. These results indicated that two OECD in vitro assays will can be applied in Korea by screening of agonistic/antagonistic effects against human ER of various chemicals. PMID:27317829

  13. Annual report, spring 2015. Alternative chemical cleaning methods for high level waste tanks-corrosion test results

    Energy Technology Data Exchange (ETDEWEB)

    Wyrwas, R. B. [Savannah River Site (SRS), Aiken, SC (United States)

    2015-07-06

    The testing presented in this report is in support of the investigation of the Alternative Chemical Cleaning program to aid in developing strategies and technologies to chemically clean radioactive High Level Waste tanks prior to tank closure. The data and conclusions presented here were the examination of the corrosion rates of A285 carbon steel and 304L stainless steel when interacted with the chemical cleaning solution composed of 0.18 M nitric acid and 0.5 wt. % oxalic acid. This solution has been proposed as a dissolution solution that would be used to remove the remaining hard heel portion of the sludge in the waste tanks. This solution was combined with the HM and PUREX simulated sludge with dilution ratios that represent the bulk oxalic cleaning process (20:1 ratio, acid solution to simulant) and the cumulative volume associated with multiple acid strikes (50:1 ratio). The testing was conducted over 28 days at 50°C and deployed two methods to invest the corrosion conditions; passive weight loss coupon and an active electrochemical probe were used to collect data on the corrosion rate and material performance. In addition to investigating the chemical cleaning solutions, electrochemical corrosion testing was performed on acidic and basic solutions containing sodium permanganate at room temperature to explore the corrosion impacts if these solutions were to be implemented to retrieve remaining actinides that are currently in the sludge of the tank.

  14. Testing Silica Fume-Based Concrete Composites under Chemical and Microbiological Sulfate Attacks

    Directory of Open Access Journals (Sweden)

    Adriana Estokova

    2016-04-01

    Full Text Available Current design practices based on descriptive approaches to concrete specification may not be appropriate for the management of aggressive environments. In this study, the durability of cement-based materials with and without the addition of silica fume, subjected to conditions that leach calcium and silicon, were investigated. Chemical corrosion was simulated by employing various H2SO4 and MgSO4 solutions, and biological corrosion was simulated using Acidithiobacillus sp. bacterial inoculation, leading to disrupted and damaged surfaces; the samples’ mass changes were studied following both chemical and biological attacks. Different leaching trends were observed via X-ray fluorescence when comparing chemical with biological leaching. Lower leaching rates were found for concrete samples fortified with silica fume than those without silica fume. X-ray diffraction and scanning electron microscopy confirmed a massive sulfate precipitate formation on the concrete surface due to bacterial exposure.

  15. Chemical Tagging of FGK Stars: Testing Membership to Young Stellar Kinematics Groups

    CERN Document Server

    Montes, D; Hernandez, J I Gonzalez

    2015-01-01

    In this contribution talk we summarize the results of our ongoing project of detailed analysis of the chemical content (chemical tagging) as a promising powerful method to provide clear constraints on the membership of FGK kinematic candidates to stellar kinematic groups of different ages that can be used as an alternative or complementary to the methods that use kinematics, photometry or age indicators. This membership information is very important to better understand the star formation history in the solar neighborhood discerning between field-like stars (associated with dynamical resonances (bar) or spiral structure) and real physical structures of coeval stars with a common origin (debris of star-forming aggregates in the disk). We have already applied the chemical tagging method to constrain the membership of FGK candidate stars to the Hyades supercluster and the Ursa Major moving group and in this contribution we present the preliminary results of our study of the Castor moving group.

  16. Combining polar organic chemical integrative samplers (POCIS) with toxicity testing to evaluate pesticide mixture effects on natural phototrophic biofilms

    International Nuclear Information System (INIS)

    Polar organic chemical integrative samplers (POCIS) are valuable tools in passive sampling methods for monitoring polar organic pesticides in freshwaters. Pesticides extracted from the environment using such methods can be used to toxicity tests. This study evaluated the acute effects of POCIS extracts on natural phototrophic biofilm communities. Our results demonstrate an effect of POCIS pesticide mixtures on chlorophyll a fluorescence, photosynthetic efficiency and community structure. Nevertheless, the range of biofilm responses differs according to origin of the biofilms tested, revealing spatial variations in the sensitivity of natural communities in the studied stream. Combining passive sampler extracts with community-level toxicity tests offers promising perspectives for ecological risk assessment. - Research highlights: → Polar organic chemical integrative samplers (POCIS) were used for monitoring polar organic pesticides in a contaminated river. → The acute effects of POCIS extracts were tested on natural phototrophic biofilm communities. → POCIS pesticide mixtures affected chlorophyll a fluorescence, photosynthetic efficiency and community structure. → Biofilm responses differed according to origin of the biofilms tested, revealing variations in the sensitivity of natural communities. → Combining passive sampler extracts with community-level toxicity tests offers promising perspectives for ecological risk assessment. - Pesticide mixtures extracted from POCIS can affect chl a fluorescence, photosynthetic efficiency and community structure of natural biofilms.

  17. Use of short-term test systems for the prediction of the hazard represented by potential chemical carcinogens

    International Nuclear Information System (INIS)

    It has been hypothesized that results from short-term bioassays will ultimately provide information that will be useful for human health hazard assessment. Historically, the validity of the short-term tests has been assessed using the framework of the epidemiologic/medical screens. In this context, the results of the carcinogen (long-term) bioassay is generally used as the standard. However, this approach is widely recognized as being biased and, because it employs qualitative data, cannot be used to assist in isolating those compounds which may represent a more significant toxicologic hazard than others. In contrast, the goal of this research is to address the problem of evaluating the utility of the short-term tests for hazard assessment using an alternative method of investigation. Chemicals were selected mostly from the list of carcinogens published by the International Agency for Research on Carcinogens (IARC); a few other chemicals commonly recognized as hazardous were included. Tumorigenicity and mutagenicity data on 52 chemicals were obtained from the Registry of Toxic Effects of Chemical Substances (RTECS) and were analyzed using a relative potency approach. The data were evaluated in a format which allowed for a comparison of the ranking of the mutagenic relative potencies of the compounds (as estimated using short-term data) vs. the ranking of the tumorigenic relative potencies (as estimated from the chronic bioassays). Although this was a preliminary investigation, it offers evidence that the short-term tests systems may be of utility in ranking the hazards represented by chemicals which may contribute to increased carcinogenesis in humans as a result of occupational or environmental exposures. 177 refs., 8 tabs

  18. Use of short-term test systems for the prediction of the hazard represented by potential chemical carcinogens

    Energy Technology Data Exchange (ETDEWEB)

    Glass, L.R.; Jones, T.D.; Easterly, C.E.; Walsh, P.J.

    1990-10-01

    It has been hypothesized that results from short-term bioassays will ultimately provide information that will be useful for human health hazard assessment. Historically, the validity of the short-term tests has been assessed using the framework of the epidemiologic/medical screens. In this context, the results of the carcinogen (long-term) bioassay is generally used as the standard. However, this approach is widely recognized as being biased and, because it employs qualitative data, cannot be used to assist in isolating those compounds which may represent a more significant toxicologic hazard than others. In contrast, the goal of this research is to address the problem of evaluating the utility of the short-term tests for hazard assessment using an alternative method of investigation. Chemicals were selected mostly from the list of carcinogens published by the International Agency for Research on Carcinogens (IARC); a few other chemicals commonly recognized as hazardous were included. Tumorigenicity and mutagenicity data on 52 chemicals were obtained from the Registry of Toxic Effects of Chemical Substances (RTECS) and were analyzed using a relative potency approach. The data were evaluated in a format which allowed for a comparison of the ranking of the mutagenic relative potencies of the compounds (as estimated using short-term data) vs. the ranking of the tumorigenic relative potencies (as estimated from the chronic bioassays). Although this was a preliminary investigation, it offers evidence that the short-term tests systems may be of utility in ranking the hazards represented by chemicals which may contribute to increased carcinogenesis in humans as a result of occupational or environmental exposures. 177 refs., 8 tabs.

  19. Development of test stand for experimental investigation of chemical and physical phenomena in Liquid Rocket Engine

    OpenAIRE

    Emerson Andrade Santos; Wilton Fernandes Alves; André Neves Almeida Prado; Cristiane Aparecida Martins

    2011-01-01

    The main objective of this work was to present the specification of an experimental firing test stand for liquid rocket engines (LRE) and develop a program for control and acquisition of data. It provides conditions to test rocket engines with thrust from 50 to 100 kgf. A methodology for laboratory work implementation using information technology, which will allow the automatic and remote functioning of the test stand, permits users to input the necessary data to conduct tests safely, achieve...

  20. Comparison of sublethal and lethal criteria for nine different chemicals in standardized toxicity tests using the earthworm Eisenia andrei

    Energy Technology Data Exchange (ETDEWEB)

    Van Gestel, C.A.; Dirven-Van Breemen, E.M.; Baerselman, R.; Emans, H.J.; Janssen, J.A.; Postuma, R.; Van Vliet, P.J. (National Institute of Public Health and Environmental Protection, Bilthoven, (Netherlands))

    1992-04-01

    In this study, the effects of nine different chemicals on the survival, growth, and reproduction of the earthworm species Eisenia andrei were determined using a recently developed method. Earthworms were exposed for 3 weeks to the test chemicals in an artificial soil substrate. Additional data on the acute toxicity of these chemicals were derived from the literature. For some chemicals, cocoon production was the most sensitive parameter (cadmium, chromium, paraquat, fentin, benomyl, phenmedipham), while for others cocoon hatchability was most sensitive (pentachlorophenol, parathion, carbendazim). In the case of parathion, growth of the worms seemed to be even more sensitive than reproduction. As an overall parameter for the effect on earthworm reproduction, the total number of juveniles produced per worm appeared to be a useful parameter. Differences between (acute) LC50 values and the lowest NOEC value for effects on growth and reproduction were different for each chemical. Difference was greatest for cadmium (a factor of greater than 100) and smallest for fentin, benomyl, and pentachlorophenol (a factor of 5-6).

  1. 75 FR 77634 - Approval of Test Marketing Exemptions for Certain New Chemicals

    Science.gov (United States)

    2010-12-13

    ...: January 27, 2009. Notice of Receipt: April 13, 2009 (74 FR 16857) (FRL-8406-5). Applicant: Cytec..., 2009. Notice of Receipt: April 17, 2009 FR (74 FR 17856) (FRL-8408-8). Applicant: Cytec Industries, Inc..., 2009 (74 FR 17856) (FRL-8408-8). Applicant: Cytec Industries, Inc. Chemical: (G) Aromatic...

  2. 77 FR 15609 - Revocation of TSCA Section 4 Testing Requirements for Certain High Production Volume Chemical...

    Science.gov (United States)

    2012-03-16

    ..., Substantial Release, and Substantial or Significant Human Exposure; Notice. Federal Register (58 FR 28736, May... chemical substance was based on reports from several companies to the 2002 TSCA Inventory Update Reporting... coefficient and water solubility, and to screen for reproduction/developmental toxicity. Studies responding...

  3. Predicting the Future: Opportunities and Challenges for the Chemical Industry to Apply 21st-Century Toxicity Testing

    OpenAIRE

    Settivari, Raja S; Ball, Nicholas; Murphy, Lynea; Rasoulpour, Reza; Boverhof, Darrell R; Carney, Edward W

    2015-01-01

    Interest in applying 21st-century toxicity testing tools for safety assessment of industrial chemicals is growing. Whereas conventional toxicology uses mainly animal-based, descriptive methods, a paradigm shift is emerging in which computational approaches, systems biology, high-throughput in vitro toxicity assays, and high-throughput exposure assessments are beginning to be applied to mechanism-based risk assessments in a time- and resource-efficient fashion. Here we describe recent advances...

  4. A Conceptual and Numerical Model for Thermal-Hydrological-Chemical Processes in the Yucca Mountain Drift Scale Test

    OpenAIRE

    Sonnenthal, Eric L.; Spycher, Nicolas F.; Conrad, Mark; Apps, John

    2003-01-01

    A numerical model was developed to predict the coupled thermal, hydrological, and chemical (THC) processes accompanying the Drift Scale Test (DST) at Yucca Mountain, NV. The DST has been closely monitored through the collection of gas, water, and mineral samples as well as thermal, hydrological, and mechanical measurements. A two-dimensional dual permeability model was developed to evaluate multiphase, multicomponent, reaction-transport processes in the fractured tuff. Comparisons betwee...

  5. Quick, portable toxicity testing of marine or terrigenous fluids, sediments, or chemicals with bioluminescent organism

    International Nuclear Information System (INIS)

    A hand-held, battery-operated instrument, which measures bioluminescence inhibition of the microscopic marine dinoflagellate Pyrocystis lunula, is capable of field-testing substances for toxicity. The organism is sensitive to ppb of strong toxicants. It tolerates some solvents in concentrations necessary for testing lipophylic samples. A test consumes only micrograms of sample. This method requires no adjustments for salinity, pH, color, or turbidity. It has been used successfully to test oil-well drilling fluids, brines produced with oil, waters and sediments from streams and lakes and petroleum-plant effluents containing contaminants such as benzene. The test is non-specific; however, if the substance is known, the end-point effects a direct measurement of its concentration. One-hour toxicity screening tests in the field produce results comparable to the standard four-hour laboratory test. Keeping the sample in the dark during incubation and testing, together with shortness of the overall procedure, eliminates anomalies from light-sensitive substances. Day-to-day variation, as well as among test replicates, is less than 10%. This quick method yields results comparable with a quick test that uses Photobacterium phosphoria, and with 96-hour tests that use Mysidopsis bahia, Artemia salina, Gonyaulax polyedra, Pimephales promelas, Ceriodaphnia dubia, and Cyprinodon variegatus

  6. A coupled THC model of the FEBEX in situ test with bentonite swelling and chemical and thermal osmosis

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, L.; Samper, J.; Montenegro, L.

    2011-04-01

    The performance assessment of a geological repository for radioactive waste requires quantifying the geochemical evolution of the bentonite engineered barrier. This barrier will be exposed to coupled thermal (T), hydrodynamic (H), mechanical (M) and chemical (C) processes. This paper presents a coupled THC model of the FEBEX (Full-scale Engineered Barrier EXperiment) in situ test which accounts for bentonite swelling and chemical and thermal osmosis. Model results attest the relevance of thermal osmosis and bentonite swelling for the geochemical evolution of the bentonite barrier while chemical osmosis is found to be almost irrelevant. The model has been tested with data collected after the dismantling of heater 1 of the in situ test. The model reproduces reasonably well the measured temperature, relative humidity, water content and inferred geochemical data. However, it fails to mimic the solute concentrations at the heater-bentonite and bentonite-granite interfaces because the model does not account for the volume change of bentonite, the CO{sub 2}(g) degassing and the transport of vapor from the bentonite into the granite. The inferred HCO{sub 3}{sup -} and pH data cannot be explained solely by solute transport, calcite dissolution and protonation/deprotonation by surface complexation, suggesting that such data may be affected also by other reactions.

  7. Coupled Thermal-Hydrologic-Chemical Coupled Model for In-Drift Disposal Test

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, Amy B. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Zyvoloski, George Anthony [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Weaver, Douglas James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Otto, Shawn [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Stauffer, Philip H. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-09-06

    The simulation work presented in this report supports DOE-NE Used Fuel Disposition Campaign (UFDC) goals related to the development of drift scale in-situ field testing of heat generating nuclear waste (HGNW) in salt formations. Numerical code verification and validation is an important part of the lead-up to field testing, allowing exploration of potential heater emplacement designs, monitoring locations, and perhaps most importantly the ability to predict heat and mass transfer around an evolving test. Such predictions are crucial for the design and location of sampling and monitoring that can be used to validate our understanding of a drift scale test that is likely to span several years.

  8. Fluctuations as a test of chemical non-equilibrium at the LHC

    CERN Document Server

    Begun, Viktor

    2016-01-01

    It is shown that large chemical potential leads to the significant increase of multiplicity fluctuations for bosons, and makes the fluctuations infinite in the case of Bose-Einstein condensation. It allows to distinguish between the models that explain the anomalous proton to pion ratio and the low transverse momentum enhancement of pion spectra in Pb+Pb collisions at the LHC within chemical equilibrium or non-equilibrium models. The effects of resonance decays, finite size of the system, requirements to the event statistics, different momentum cuts, and limited detector acceptance are considered. The obtained results show the possibility to observe a substantial increase of the normalized kurtosis for positively or negatively charged pions in the case of non-equilibrium or partial pion condensation using currently measured data.

  9. Initial Test of the Benchmark Chemical Approach for Predicting Microbial Transformation Rates in Aquatic Environments

    OpenAIRE

    Newton, Thomas D.; Gattie, David K.; Lewis, David L

    1990-01-01

    Using 2,4-dichlorophenoxyacetic acid methyl ester (2,4-DME) as a benchmark chemical, we determined relative pseudo-first-order rate coefficients for the butoxyethyl ester of 2,4-dichlorophenoxyacetic acid (2,4-DBE), methyl parathion, and methyl-3-chlorobenzoate in a diversity of microbial samples, including water, sediment, biofilm, and floating microbial mats collected from a laboratory mesocosm as well as from streams, lakes, and wetlands in Georgia and Florida. The decreasing order of reac...

  10. Miniaturized droplets-based microarray of chemical and biological high-throughput tests

    OpenAIRE

    Neto, Ana I.; Correia, Clara R.; Custódio, Catarina A.; Mano, J.F

    2013-01-01

    Publicado em "Journal of Tissue Engineering and Regenerative Medicine, vol. 7, supp. 1 (2013) The development of high-throughput and combinatorial technologies is helping to speed up research that is applicable in many areas of chemistry, engineering and biology. We propose a simple, versatile high-efficient and new superhydrophobic platform, which permits to arrange of quasi-spherical aqueous-based droplets with the capability to support and monitor a series of chemical/biolog...

  11. Chemical Tagging Hyades Supercluster as a consistency test of Stellar Kinematic Groups

    CERN Document Server

    Tabernero, H M; Hernández, J I González

    2010-01-01

    Stellar Kinematic Groups are kinematical coherent groups of stars which may share a common origin. These groups spread through the Galaxy over time due to tidal effects caused by galactic rotation and disk heating, however the chemical information survives. The aim of chemical tagging is to show that abundances of every element in the analysis must be homogeneous between members. We have studied the case of the Hyades Supercluster in order to compile a reliable list of members (FGK stars) based on chemical tagging information and spectroscopic age determinations of this supercluster. This information has been derived from high-resolution echelle spectra obtained during our surveys of late-type stars. For a small subsample of the Hyades Supercluster, stellar atmospheric parameters (T_eff, log g, xi and [Fe/H]) have been determined using an automatic code which takes into account the sensibility of iron EWs measured in the spectra. We have derived absolute abundances consistent with galactic abundance trends re...

  12. Lab-scale feasibility tests for sediment treatment using different physico-chemical techniques

    Energy Technology Data Exchange (ETDEWEB)

    Andreottola, Gianni; Ferrarese, Elisa [Dipt. di Ingegneria Civile e Ambientale, Univ. di Trento (Italy); Bonomo, Luca; Saponaro, Sabrina [Dipt. di Ingegneria Idraulica, Ambientale, Rilevamento, Infrastrutture Viarie, Sezione Ambientale, Politecnico di Milano (Italy); De Gioannis, Giorgia; Muntoni, Aldo [Dipt. di Geoingegneria e Tecnologie Ambientali, Univ. di Cagliari (Italy); Polettini, Alessandra; Pomi, Raffaella [Dipt. di Idraulica, Trasporti e Strade, Univ. degli Studi di Roma ' La Sapienza' (Italy)

    2010-01-15

    The sediment used in this study was similar in composition and contaminant loading to many sediments around the world. It was dredged from the northern canal of the Porto Marghera industrial area (Venice, Italy) and it was homogenized and characterized for the physical properties and chemical composition. The treatments investigated produced a variety of effects in terms of removal of heavy metals and PAHs. For total PAHs, the best results were obtained using H{sub 2}O{sub 2} only as the oxidizing agent (45% removal), and chemically+thermally activated persulfate (up to 72% removal). The kinetics of these chemical oxidation processes was rapid and almost complete in a few hours. Electrooxidation produced up to 44% of total PAHs degradation, whereas no appreciable PAH removal was attained by the electrokinetic treatment. Metal extraction by means of electrokinetics was the highest when both the anodic and the cathodic chambers were conditioned with the complexing agent ethylenediamine tetraacetic acid (EDTA). The following removal yields were obtained: 81% for As, 69% for Cr, 40% for Cu, 33% for Pb, and 22% for Zn. (orig.)

  13. Experimental Investigation Of Microbially Induced Corrosion Of Test Samples And Effect Of Self-assembled Hydrophobic Monolayers. Exposure Of Test Samples To Continuous Microbial Cultures, Chemical Analysis, And Biochemical Studies

    CERN Document Server

    Laurinavichius, K S

    1998-01-01

    Experimental Investigation Of Microbially Induced Corrosion Of Test Samples And Effect Of Self-assembled Hydrophobic Monolayers. Exposure Of Test Samples To Continuous Microbial Cultures, Chemical Analysis, And Biochemical Studies

  14. Comparison of short-term estrogenicity tests for identification of hormone-disrupting chemicals

    DEFF Research Database (Denmark)

    Andersen, H R; Andersson, A M; Arnold, S F;

    1999-01-01

    induced a strong estrogenic response in all test systems. Colchicine caused cytotoxicity only. Bisphenol A induced an estrogenic response in all assays. The results obtained for the remaining test compounds--tamoxifen, ICI 182.780, testosterone, bisphenol A dimethacrylate, 4-n-octylphenol, 4-n...

  15. Comparison of Short-Term Estrogenicity Tests for Identification of Hormone-Disrupting Chemicals

    DEFF Research Database (Denmark)

    Andersen, Helle Raun; Andersson, Anna-Maria; Arnold, Steven F.;

    1999-01-01

    estrogenic response in all test systems. Colchicine caused cytotoxicity only. Bisphenol A induced an estrogenic response in all assays. The results obtained for the remaining test compounds—tamoxifen, ICI 182.780, testosterone, bisphenol A dimethacrylate, 4-n-octylphenol, 4-n-nonylphenol, nonylphenol...

  16. Chemical durability and structural analysis of PbO–B2O3 glasses and testing for simulated radioactive wastes

    International Nuclear Information System (INIS)

    Graphical abstract: Secondary electron SEM images of lead borate glass including 80 mol% PbO before (top) and after chemical durability tests (bottom) - Abstract: Lead borate based glass formulations with high chemical durability and lower melting temperatures compared to the currently used glasses were developed as candidates for the vitrification of radioactive waste. Properties including chemical durability, glass transformation temperature, and melting temperature were analyzed. The chemical durability of PbO–B2O3 glasses with PbO contents ranging from 30 to 80 mol% was determined. An average dissolution rate of 0.2 g m−2 day−1 was obtained for the composition 80PbO⋅20B2O3. These glasses were studied under simulation conditions and showed good potential as a vitrification matrix for radioactive waste management. Clear vitrified waste products containing up to 30 mol% SrO and 25 mol% Cs2O could be obtained. Leaching rates are about hundred times higher in low PbO glasses compared to high PbO glasses. These results are encouraging since they open up new horizons in the development of low melting temperature lead borate glass for waste immobilization applications

  17. Effect of reducing the top concentration used in the in vitro chromosomal aberration test in CHL cells on the evaluation of industrial chemical genotoxicity.

    Science.gov (United States)

    Morita, Takeshi; Honma, Masamitsu; Morikawa, Kaoru

    2012-01-24

    A current concern with in vitro mammalian cell genotoxicity testing is the high frequency of false or misleading positive results caused in part by the past use of excessively high test concentrations. A dataset of 249 industrial chemicals used in Japan and tested for genotoxicity was analyzed. Of these, 116 (46.6%) were positive in the in vitro chromosomal aberration (CA) test, including 6 that were positive only at test concentrations >10mM. There were 59 CA-positive chemicals at test concentrations ≤ 1mM. At >1mM, 51 chemicals were CA-positive, including 13 Ames-positive chemicals, which were therefore not "missed" by the test battery. Thus, 38 potentially positive chemicals would not have been detected in the test battery if the top test concentration was limited to 1mM in CA test. Analysis of the relevance of CA results on the 38 missed chemicals was conducted based on a weight of evidence approach, including evaluations of effects of extreme culture conditions (low pH, high toxicity, or precipitation), in silico structural alert analysis, in vivo genotoxicity and carcinogenicity test data (where available), mode of action, or information from closely related chemicals. After an exhaustive review, there were four chemicals with some concern for human health risk assessment, nine with minimal concern, and the remaining 25 with negligible concern. We apply different top concentrations to the 38 missed chemicals to identify the most accurate approach for predicting the genotoxicity of industrial chemicals. Of these 2mM or 1mg/mL, whichever is higher, was the most effective in detecting these chemicals, i.e., relatively higher (8/13) or lower (17/25) detection among 13 chemicals with some or minimal concern, or 25 with negligible concern, respectively. Lower top concentration limits, 1mM or 0.5mg/mL, whichever is higher, are not as effective (2/13) for detecting these chemicals with concern. Therefore, we conclude 2mM or 1mg/mL, whichever is higher, would be an

  18. Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2001-01-01

    1.1 This test method covers the determination of color change and staining from liquid solutions, such as cleaning or disinfecting chemicals or both, on painted metallic surfaces and nonmetallic surfaces of materials being used inside the aircraft cabin. The effects upon the exposed specimens are measured with the AATCC Gray Scale for Color Change and AATCC Gray Color Scale for Staining. Note 1—This test method is applicable to any colored nonmetallic hard surface in contact with liquids. The selected test specimens are chosen because these materials are present in the majority of aircraft cabin interiors. 1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  19. Chemical Explosion Experiments to Improve Nuclear Test Monitoring - Developing a New Paradigm for Nuclear Test Monitoring with the Source Physics Experiments (SPE)

    International Nuclear Information System (INIS)

    A series of chemical explosions, called the Source Physics Experiments (SPE), is being conducted under the auspices of the U.S. Department of Energy's National Nuclear Security Administration (NNSA) to develop a new more physics-based paradigm for nuclear test monitoring. Currently, monitoring relies on semi-empirical models to discriminate explosions from earthquakes and to estimate key parameters such as yield. While these models have been highly successful monitoring established test sites, there is concern that future tests could occur in media and at scale depths of burial outside of our empirical experience. This is highlighted by North Korean tests, which exhibit poor performance of a reliable discriminant, mb:Ms (Selby et al., 2012), possibly due to source emplacement and differences in seismic responses for nascent and established test sites. The goal of SPE is to replace these semi-empirical relationships with numerical techniques grounded in a physical basis and thus applicable to any geologic setting or depth

  20. Standard test methods for chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade uranium dioxide powders and pellets

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1999-01-01

    1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade uranium dioxide powders and pellets to determine compliance with specifications. 1.2 This test method covers the determination of uranium and the oxygen to uranium atomic ratio in nuclear-grade uranium dioxide powder and pellets. 1.4 This test method covers the determination of chlorine and fluorine in nuclear-grade uranium dioxide. With a 1 to 10-g sample, concentrations of 5 to 200 g/g of chlorine and 1 to 200 μg/g of fluorine are determined without interference. 1.5 This test method covers the determination of moisture in uranium dioxide samples. Detection limits are as low as 10 μg. 1.6 This test method covers the determination of nitride nitrogen in uranium dioxide in the range from 10 to 250 μg. 1.7 This test method covers the spectrographic analysis of nuclear-grade UO2 for the 26 elements in the ranges indicated in Table 2. 1.8 For simultaneous determination of trace ele...

  1. Antimicrobial Activity and Physico-Chemical Properties Test of Radiation Sterilized Hydrogel Wound Dressing Containing Mengkudu Extract (Morinda citrifolia L.)

    International Nuclear Information System (INIS)

    Study on antimicrobial activity and physico-chemical properties of hydrogel wound dressing containing mengkudu extract has been carried out. Hydrogel wound dressing was prepared by irradiating the mixture of polyvinyl pyrrolidone (PVP), agar, poly ethylene glycol (PEG) and mengkudu extract with certain composition using gamma ray at a dose of 25 kGy. The extract concentration used was 0 to 4% w/w. Pseudomonas aeruginosa, Staphylococcus aureus and air microbes isolated from the laboratory at P3TIR-BATAN were used as tested microbe. Water content, water absorption, microbes penetration on hydrogel, water evaporation and tensile strength were determined as physico-chemical parameters. The results show that the minimum concentration of mengkudu extract to eradicate the Pseudomonas aeruginosa, Staphylococcus aureus bacteria is 2%. The results of microbe penetration test show that none of the microbes tested can penetrate the membrane of hydrogel containing mengkudu extract. This mean is the hydrogel membrane is a good barrier against microbe contamination. Water content of Hydrogel with extract concentration of 0, 1, 2 and 4% w/w mengkudu extract is 87%, 85% and 82% respectively. Hydrogel with 4% w/w mengkudu extract shows highest water absorption capacity. Tensile strength of hydrogel depends on concentration of mengkudu extract in the hydrogel. (author)

  2. Ultrathin Gas Permeable Oxide Membranes for Chemical Sensing: Nanoporous Ta2O5 Test Study

    Directory of Open Access Journals (Sweden)

    Alexander Imbault

    2015-09-01

    Full Text Available Conductometric gas sensors made of gas permeable metal oxide ultrathin membranes can combine the functions of a selective filter, preconcentrator, and sensing element and thus can be particularly promising for the active sampling of diluted analytes. Here we report a case study of the electron transport and gas sensing properties of such a membrane made of nanoporous Ta2O5. These membranes demonstrated a noticeable chemical sensitivity toward ammonia, ethanol, and acetone at high temperatures above 400 °C. Different from traditional thin films, such gas permeable, ultrathin gas sensing elements can be made suspended enabling advanced architectures of ultrasensitive analytical systems operating at high temperatures and in harsh environments.

  3. The electro-chemical tests and the programmable autonomous potentiometer; Las pruebas electroquimicas y el potenciostato autonomo programable

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Ochoa, Esteban Miguel; Salazar Cruz, Sergio R.; Aguilar Soto, Armando; Ley Koo, Marcos [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1997-12-31

    The development of a programmable autonomous potentiostat is described as an instrumentation means for voltage and current measurement, considering that one of the main problems to solve is the metallic components corrosion. Also the electro-chemical tests that can be performed with this instrument are described, as well as some possible application [Espanol] Se describe el desarrollo de un potenciostato autonomo programable como medio de instrumentacion para medir voltajes y corrientes, tomando en cuenta que uno de los principales problemas por resolver es la corrosion de sus componentes metalicos. Se describen ademas las pruebas eletcroquimicas que pueden realizarse con este instrumento, asi como alguna posible aplicacion

  4. 46 CFR 4.06-15 - Accessibility of chemical testing devices.

    Science.gov (United States)

    2010-10-01

    ... sufficient number of urine-specimen collection and shipping kits meeting the requirements of 49 CFR part 40... accessible on board the vessel to determine the presence of alcohol in the system of each individual who was... Safety Administration (NHTSA). (3) The alcohol testing devices need not be carried on board each...

  5. 40 CFR 230.61 - Chemical, biological, and physical evaluation and testing.

    Science.gov (United States)

    2010-07-01

    ... for adverse environmental impact at the proposed disposal site, a comparison of the biological... evaluation and testing. 230.61 Section 230.61 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... environmental effects. If the General Evaluation indicates the presence of a sufficiently large number...

  6. Evaluation of a mitochondrial test for the determination of chemical toxicity

    OpenAIRE

    Shannon, Robert David

    1988-01-01

    The feasibility of using rat liver mitochondria respiratory parameters as a short-term toxicity test was investigated. Mitochondrial fractions were exposed to six concentrations of five chlorophenols. Respiratory parameters were measured and compared to control experiments. The toxicity of the chlorophenos, measured by the 50% uncoupling concentration (UC50), increased with increasing chloro substitution. The UC50 values for the five chlorophenols were compared to six phy...

  7. Development of a reference artificial sediment for chemical testing adapted to the MELA sediment contact assay

    OpenAIRE

    Le Bihanic, Florane; Perrichon, Prescilla; Landi, Laure; Clerandeau, Christelle; Le Menach, Karyn; Budzinski, Helene; Cousin, Xavier; Cachot, Jerome

    2014-01-01

    Most persistent organic pollutants, due to their hydrophobic properties, accumulate in aquatic sediments and represent a high risk for sediment quality. To assess the toxicity of hydrophobic pollutants, a novel approach was recently proposed as an alternative to replace, refine and reduce animal experimentation: the medaka embryo–larval sediment contact assay (MELAc). This assay is performed with Japanese medaka embryos incubated on a natural sediment spiked with the compound being tested. Wi...

  8. Novel Weapons Testing: Are Invasive Plants More Chemically Defended than Native Plants?

    OpenAIRE

    Lind, Eric M.; Parker,John D.

    2010-01-01

    Background Exotic species have been hypothesized to successfully invade new habitats by virtue of possessing novel biochemistry that repels native enemies. Despite the pivotal long-term consequences of invasion for native food-webs, to date there are no experimental studies examining directly whether exotic plants are any more or less biochemically deterrent than native plants to native herbivores. Methodology/Principal Findings In a direct test of this hypothesis using herbivore feeding assa...

  9. Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This test method covers determination of the effects of cleaning solutions and liquid cleaner concentrates on painted aircraft surfaces (Note 1). Streaking, discoloration, and blistering may be determined visually. Softening is determined with a series of specially prepared pencils wherein determination of the softest pencil to rupture the paint film is made. Note 1—This test method is applicable to any paint film that is exposed to cleaning materials. MIL-PRF-85285 has been selected as a basic example. When other paint finishes are used, refer to the applicable material specification for panel preparation and system curing prior to testing. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user ...

  10. Experimental terrestrial soil-core microcosm test protocol. A method for measuring the potential ecological effects, fate, and transport of chemicals in terrestrial ecosystems

    Energy Technology Data Exchange (ETDEWEB)

    Van Voris, P.; Tolle, D.A.; Arthur, M.F.

    1985-06-01

    In order to protect the environment properly and have a realistic appraisal of how a chemical will act in the environment, tests of ecological effects and chemical fate must be performed on complex assemblages of biotic and abiotic components (i.e., microcosms) as well as single species. This protocol is one which could be added to a series of tests recently developed as guidelines for Section 4 of the Toxic Substances Control Act (P.L. 94-469; U.S.C., Section 2601-2629). The terrestrial soil-core microcosm is designed to supply site-specific and possibly regional information on the probable chemical fate and ecological effects resulting from release of a chemical substance to a terrestrial ecosystem. The EPA will use the data resulting from this test system to compare the potential hazards of a chemical with others that have been previously evaluated.

  11. Standard test methods for chemical and spectrochemical analysis of nuclear-Grade silver-indium-cadmium alloys

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1990-01-01

    1.1 These test methods cover procedures for the chemical and spectrochemical analysis of nuclear grade silver-indium-cadmium (Ag-In-Cd) alloys to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Silver, Indium, and Cadmium by a Titration Method 7-15 Trace Impurities by Carrier-Distillation Spectro- chemical Method 16-22 1.3 The values stated in SI units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard and precautionary statements, see Section 5 and Practices E50. 7.1 This test method is applicable to the determination of silver, indium, and cadmium in alloys of approximately 80 % silver, 15 % indium, and 5 % cadmium used in nuclear reactor control r...

  12. Field tests of corrosion and chemical sensors for geothermal power plants

    Energy Technology Data Exchange (ETDEWEB)

    Robertus, R.J.; Shannon, D.W.; Sullivan, R.G.; Mackey, D.B.; Koski, O.H.; McBarron, F.O.; Duce, J.L.; Pierce, D.D.

    1986-03-01

    This report summarizes approximately two years of continuous monitoring of corrosion (and other variables that affect corrosion) in a 10-megawatt binary cycle geothermal power plant. The project goal was to develop methods for detecting adverse plant conditions soon enough to prevent equipment failures. The instruments tested were: (1) resistance-type corrosion probes; (2) linear polarization corrosion probes; (3) oxidation/reduction potential (ORP) probes for oxygen detection; (4) high-temperature pH electrodes; and (5) electrodeless conductivity cells for gas bubble detection.

  13. Guidance Document on Standardised Test Guidelines for Evaluating Chemicals for Endocrine Disruption

    DEFF Research Database (Denmark)

    Satya, Sneha; Wade, Mike; Hass, Ulla;

    Assessment). In 2010, the OECD Secretariat presented the objectives and a draft outline of the document at the meeting of the Working Group of National Coordinators of the Test Guidelines Programme (WNT). The document was then developed by two consultants in close cooperation with an advisory group on...... progress report was presented to the WNT at its 2011 meeting. In May 2011, comments were requested from the WNT on the changes made to the draft Guidance Document. In parallel to the finalisation of the draft Guidance document, three case studies were then developed by the consultants to valuate whether...

  14. Inter-well chemical tracer testing at the Rittershoffen geothermal site (Alsace, France)

    OpenAIRE

    Sanjuan, Bernard,; Scheiber, Julia; Gal, Frédérick; Touzelet, Stéphane; Genter, Albert; Villadangos, Guerric

    2016-01-01

    International audience The ECOGI Company develops a project of deep geothermal energy located in the Rittershoffen site, in Alsace, in the Upper Rhine Graben area, 50 km north of Strasbourg and 10 km east from the Soultz EGS site, in order to produce steam for the industrial drying of starch from a well doublet (injection and production wells). The first geothermal well, GRT-1, with a vertical depth of about 2,550 m (drilled length of about 2,580 m) was drilled in 2012, and tested and succ...

  15. Housekeeping Closure Report for Corrective Action Unit 288: Area 25 Engine Maintenance, Assembly, and Disassembly/Treatability Test Facility Chemicals Sites, Nevada Test Site, Nevada

    International Nuclear Information System (INIS)

    The Federal Facility Agreement and Consent Order was entered into by the State of Nevada, U.S. Department of Energy, and U.S. Department of Defense to identify sites of potential historical contamination and implement corrective actions based on public health and environmental considerations. The facilities subject to this agreement include the Nevada Test Site (NTS), parts of the Tonopah Test Range, parts to the Nellis Air Force Range, the Central Nevada Test Area, and the Project Shoal Area. Corrective Action Sites (CASs) are areas potentially requiring corrective actions and may include solid waste management units, individual disposal, or release sites. Based on geography, technical similarity, agency responsibility, or other appropriate reasons, CASs are grouped together into Corrective Action Units (CAUs) for the purposes of determining corrective actions. This report contains the Closure Verification Forms for cleanup activities that were performed at 11 CASs within CAU 288 on the NTS. The Housekeeping Closure Verification Form for each CAS provides the location, directions to the site, general description, and photographs of the site before and after cleanup activities. Housekeeping activities at these sites included removal of debris, crates containing contaminated materials, chemicals, and other material. Based on these activities, no further action is required at these CASs

  16. Report on stages 3 and 4: testing of coupled chemical transport models

    International Nuclear Information System (INIS)

    Chemval is an international exercise aimed at the verification and validation of predictive models describing groundwater speciation and geochemical transport. As a component of the CEC Mirage project (Migration of radionuclides in the geosphere) - second phase, Chemval is being carried out within the framework of the third Community R and D programme on radioactive waste management and storage (1985-89). This report describes the methodology employed and results obtained for 15 verification tests of varying complexity. The outcome of validation studies against two well-characterized experimental systems is also assessed in terms of the requirements for radiological risk assessment. Chemval is funded jointly by the Commission of the European Communities and Her majesty's Inspectorate of Pollution - UK Department of the Environment. 75 refs., 67 figs; 21 tabs

  17. Design and testing of micro fluidic chemical analysis chip integrated with micro valveless pump

    Institute of Scientific and Technical Information of China (English)

    FU; Xin; XIE; Haibo; YANG; Huayong; JIA; Zhijian; FANG; Qun

    2005-01-01

    A new structure and working principle of the chip integrated with micro valveless pump for capillary electrophoresis was proposed in this paper. The micro valveless pump with plane structure has advantages of simple structure, and the process technology is compatible with existing micro chips for capillary electrophoresis. Based upon the mathematical model, simulation study of micro pump was carried out to investigate the influence of structural parameters on flow characteristics, and the performance of the integrated micro pump was also tested with different control parameters. The simulation results agree with the experimental results. Three samples, which are amino acid, fluorescein and buffer solution, have been examined with this chip. The results of the primary experiments showed that the micro valveless pump was promising in the integration and automatization of miniature integrated fluidic systems.

  18. Evaluation of the migration of chemicals from baby bottles under standardised and duration testing conditions.

    Science.gov (United States)

    Onghena, Matthias; Van Hoeck, Els; Negreira, Noelia; Quirynen, Laurent; Van Loco, Joris; Covaci, Adrian

    2016-05-01

    After the prohibition of bisphenol-A-containing polycarbonate baby bottles in the European Union (EU), alternative materials, such as polypropylene, polyethersulphone, Tritan™ copolyester, etc., have appeared on the market. Based on an initial screening and in vitro toxicity assessment, the most toxic migrating compounds were selected to be monitored and quantified using validated GC- and LC-QqQ-MS methods. The effect of several 'real-life-use conditions', such as microwave, sterilisation and dishwasher, on the migration of different contaminants was evaluated by means of duration tests. These results were compared with a reference treatment (filling five times with pre-heated simulant at 40°C) and with the legal EU 'repetitive-use conditions' (three migrations, 2 h at 70°C). Analysis of the third migration step of the EU repetitive-use conditions (which has to comply with the EU legislative migration limits) showed that several non-authorised compounds were observed in some baby bottles exceeding 10 µg kg(-1). However, all authorised compounds were detected well below their respective specific migration limits (SMLs). The reference experiment confirmed the migration of some of the compounds previously detected in the EU repetitive-use experiment, though at lower concentrations. Analysis of extracts from the microwave and dishwasher experiments showed a reduction in the migration during the duration tests. In general, the concentrations found were low and comparable with the reference experiment. Similar observations were made for the two sterilisation types: steam and cooking sterilisation. However, steam sterilisation seems to be more recommended for daily use of baby bottles, since it resulted in a lower release of substances afterwards. Repeated use of baby bottles under 'real-life' conditions showed no increase in the migration of investigated compounds and, after some time, the migration of these compounds even became negligible. PMID:27043734

  19. Introduction and summary of the 13th meeting of the Scientific Group on Methodologies for the Safety Evaluation of Chemicals (SGOMSEC): alternative testing methodologies.

    OpenAIRE

    Stokes, W S; Marafante, E

    1998-01-01

    A workshop on alternative toxicological testing methodologies was convened by the Scientific Group on Methodologies for the Safety Evaluation of Chemicals (SGOMSEC) 26-31 January 1997 in Ispra, Italy, at the European Centre for the Validation of Alternative Methods. The purpose of the workshop was to assess the current status of alternative testing methodologies available to evaluate adverse human health and environmental effects of chemicals. Another objective of the workshop was to identify...

  20. Fluidized-bed and fixed-bed reactor testing of methane chemical looping combustion with MgO-promoted hematite

    International Nuclear Information System (INIS)

    Highlights: • Mg-promoted hematite showed better performance than hematite for methane CLC. • Stable reaction performance was observed during cyclic CH4 CLC fluidized bed tests. • Attrition resistance was better than that with standard FCC catalysts. • 5 wt% MgO increased both the oxygen capacity and reaction rates for CH4 CLC. • Possible mechanisms for the CH4 CLC OC performance enhancement are presented. - Abstract: In this study MgO-promoted Fe2O3 hematite oxygen carriers were synthesized from various Mg sources and evaluated for methane chemical looping combustion. Particles suitable for fluidized bed flow reactor studies were prepared in the lab. Cyclic CLC tests conducted in the fluidized bed with MgO promoted hematite showed better performance than that with hematite. Attrition resistance of laboratory prepared MgO promoted hematite was excellent. Reactivity and stability of the oxygen carrier materials were also tested in the thermogravimetric analyzer and bench-scale reactors. Scanning electron microscopy and energy-dispersive X-ray spectroscopy, and X-ray diffraction were used to study the morphology and elemental compositions present in the hematite and promoted hematite oxygen carriers prior to and following the multi-cycle chemical looping reaction. The incorporation of 5 wt% MgO led to an increased reaction rate and an increase in oxygen utilized as compared to the pure hematite oxygen carrier. Possible reasons for the promotion effect by MgO were evaluated. These studies reveal that the best performing oxygen carrier was the 5 wt% MgO/Fe2O3 which exhibited no observed degradation in the kinetics and conversion performance in the methane step over 15 reduction and oxidation cycles. The Mg promoted oxygen carrier also showed reduced coke formation as compared to the pure hematite carrier

  1. Estimation Source Parameters of Large-Scale Chemical Surface Explosions and Recent Underground Nuclear Tests

    Science.gov (United States)

    Gitterman, Y.; Kim, S.; Hofstetter, R.

    2013-12-01

    's surface. A similar effect was observed before at ISN stations for the Pakistan explosion (28.05.98) at a different frequency 1.7 Hz indicating the source- and not site-effect. Based on the null frequency dependency on the near-surface acoustic velocity and the source depth, the depth of the both North Korea tests was estimated ~2 km, different from the value ~1 km informed by USGS. This depth estimation is based only on several closely placed teleseismic ISN stations and should be verified at other local networks on similar directions and distances from the test site.

  2. Cyanide fishing and cyanide detection in coral reef fish using chemical tests and biosensors.

    Science.gov (United States)

    Mak, Karen K W; Yanase, Hideshi; Renneberg, Reinhard

    2005-06-15

    Sodium cyanide has been used in the Philippines to collect tropical marine fish for aquarium and food trades since the early 1960s. Cyanide fishing is a fast method to stun and collect fish. This practice is damaging the coral reefs irreversibly. In most countries cyanide fishing is illegal, but most of the exporting and importing countries do not have test and certificate systems. Many analytical methods are available for the detection of cyanide in environmental and biological samples. However, most of the techniques are time consuming, and some lack specificity or sensitivity. Besides, an ultra sensitive cyanide detection method is needed due to the rapid detoxification mechanisms in fish. The aim of this review is to give an overview of cyanide fishing problem in the south-east Asia and current strategies to combat this destructive practice, summarise some of the methods for cyanide detection in biological samples and their disadvantages. A novel approach to detect cyanide in marine fish tissues is briefly discussed. PMID:15854827

  3. Thermal and chemical analysis of carbon dioxide reforming of methane using the out-of-pile test facility

    Energy Technology Data Exchange (ETDEWEB)

    Huang Ziyong [Institute of Nuclear Energy Technology, Tsinghua University (China); Ohashi, Hirofumi; Inagaki, Yoshiyuki [Department of Advanced Nuclear Heat Technology, Oarai Research Establishment, Japan Atomic Energy Research Institute, Oarai, Ibaraki (Japan)

    2000-03-01

    In the Japan Atomic Energy Research Institute, a hydrogen production system is being designed to produce hydrogen by means of steam reforming of natural gas (its main composition is methane(CH{sub 4})) using nuclear heat (10 MW, 1178 K) supplied by the High Temperature Engineering Test Reactor (HTTR). Prior to coupling of the steam reforming system with the HTTR, an out-of-pile demonstration test was planned to confirm safety, controllability and performance of the steam reforming system under simulated operational conditions of the prototype. The out-of-pile test facility simulates key components downstream to an intermediate heat exchanger of the HTTR hydrogen production system on a scale of 1 : 30 and has a hydrogen production capacity of 110 Nm{sup 3}/h using an electric heater as a reactor substitute. The test facility is presently under construction. Reforming of natural gas with carbon dioxide CO{sub 2} (CO{sub 2} reforming) using the out-of-pile test facility is also being considered. In recent years, catalytic reforming of natural gas with CO{sub 2} to synthesis gas (CO and H{sub 2}) has been proposed as one of the most promising technologies for utilization of those two greenhouse gases. Numerical analysis on heat and mass balance has practical significance in CO{sub 2} reforming when the steam reforming process is adopted in the out-of-pile test. Numerical analysis of CO{sub 2} reforming and reforming of natural gas with CO{sub 2} and steam (CO{sub 2}+H{sub 2}O reforming) have been carried out using the mathematical model. Results such as the methane conversion rate, product gas composition, and the components temperature distribution considering the effects of helium gas temperature, reforming pressure, molar ratio of process gases and so on have been obtained in the numerical analysis. Heat and mass balance of the out-of-pile test facility considering chemical reactions are evaluated well. The methane conversation rates are about 0.36 and 0.35 which

  4. Thermal and chemical analysis of carbon dioxide reforming of methane using the out-of-pile test facility

    International Nuclear Information System (INIS)

    In the Japan Atomic Energy Research Institute, a hydrogen production system is being designed to produce hydrogen by means of steam reforming of natural gas (its main composition is methane(CH4)) using nuclear heat (10 MW, 1178 K) supplied by the High Temperature Engineering Test Reactor (HTTR). Prior to coupling of the steam reforming system with the HTTR, an out-of-pile demonstration test was planned to confirm safety, controllability and performance of the steam reforming system under simulated operational conditions of the prototype. The out-of-pile test facility simulates key components downstream to an intermediate heat exchanger of the HTTR hydrogen production system on a scale of 1 : 30 and has a hydrogen production capacity of 110 Nm3/h using an electric heater as a reactor substitute. The test facility is presently under construction. Reforming of natural gas with carbon dioxide CO2 (CO2 reforming) using the out-of-pile test facility is also being considered. In recent years, catalytic reforming of natural gas with CO2 to synthesis gas (CO and H2) has been proposed as one of the most promising technologies for utilization of those two greenhouse gases. Numerical analysis on heat and mass balance has practical significance in CO2 reforming when the steam reforming process is adopted in the out-of-pile test. Numerical analysis of CO2 reforming and reforming of natural gas with CO2 and steam (CO2+H2O reforming) have been carried out using the mathematical model. Results such as the methane conversion rate, product gas composition, and the components temperature distribution considering the effects of helium gas temperature, reforming pressure, molar ratio of process gases and so on have been obtained in the numerical analysis. Heat and mass balance of the out-of-pile test facility considering chemical reactions are evaluated well. The methane conversation rates are about 0.36 and 0.35 which correspond to the equilibrium at 1085 and 1100 K for CO2 reforming

  5. Testing Of Enhanced Chemical Cleaning Of SRS Actual Waste Tank 5F And Tank 12H Sludges

    International Nuclear Information System (INIS)

    Forty three of the High Level Waste (HLW) tanks at the Savannah River Site (SRS) have internal structures that hinder removal of the last approximately five thousand gallons of waste sludge solely by mechanical means. Chemical cleaning can be utilized to dissolve the sludge heel with oxalic acid (OA) and pump the material to a separate waste tank in preparation for final disposition. This dissolved sludge material is pH adjusted downstream of the dissolution process, precipitating the sludge components along with sodium oxalate solids. The large quantities of sodium oxalate and other metal oxalates formed impact downstream processes by requiring additional washing during sludge batch preparation and increase the amount of material that must be processed in the tank farm evaporator systems and the Saltstone Processing Facility. Enhanced Chemical Cleaning (ECC) was identified as a potential method for greatly reducing the impact of oxalate additions to the SRS Tank Farms without adding additional components to the waste that would extend processing or increase waste form volumes. In support of Savannah River Site (SRS) tank closure efforts, the Savannah River National Laboratory (SRNL) conducted Real Waste Testing (RWT) to evaluate an alternative to the baseline 8 wt. % OA chemical cleaning technology for tank sludge heel removal. The baseline OA technology results in the addition of significant volumes of oxalate salts to the SRS tank farm and there is insufficient space to accommodate the neutralized streams resulting from the treatment of the multiple remaining waste tanks requiring closure. ECC is a promising alternative to bulk OA cleaning, which utilizes a more dilute OA (nominally 2 wt. % at a pH of around 2) and an oxalate destruction technology. The technology is being adapted by AREVA from their decontamination technology for Nuclear Power Plant secondary side scale removal. This report contains results from the SRNL small scale testing of the ECC process

  6. TESTING OF ENHANCED CHEMICAL CLEANING OF SRS ACTUAL WASTE TANK 5F AND TANK 12H SLUDGES

    Energy Technology Data Exchange (ETDEWEB)

    Martino, C.; King, W.

    2011-08-22

    Forty three of the High Level Waste (HLW) tanks at the Savannah River Site (SRS) have internal structures that hinder removal of the last approximately five thousand gallons of waste sludge solely by mechanical means. Chemical cleaning can be utilized to dissolve the sludge heel with oxalic acid (OA) and pump the material to a separate waste tank in preparation for final disposition. This dissolved sludge material is pH adjusted downstream of the dissolution process, precipitating the sludge components along with sodium oxalate solids. The large quantities of sodium oxalate and other metal oxalates formed impact downstream processes by requiring additional washing during sludge batch preparation and increase the amount of material that must be processed in the tank farm evaporator systems and the Saltstone Processing Facility. Enhanced Chemical Cleaning (ECC) was identified as a potential method for greatly reducing the impact of oxalate additions to the SRS Tank Farms without adding additional components to the waste that would extend processing or increase waste form volumes. In support of Savannah River Site (SRS) tank closure efforts, the Savannah River National Laboratory (SRNL) conducted Real Waste Testing (RWT) to evaluate an alternative to the baseline 8 wt. % OA chemical cleaning technology for tank sludge heel removal. The baseline OA technology results in the addition of significant volumes of oxalate salts to the SRS tank farm and there is insufficient space to accommodate the neutralized streams resulting from the treatment of the multiple remaining waste tanks requiring closure. ECC is a promising alternative to bulk OA cleaning, which utilizes a more dilute OA (nominally 2 wt. % at a pH of around 2) and an oxalate destruction technology. The technology is being adapted by AREVA from their decontamination technology for Nuclear Power Plant secondary side scale removal. This report contains results from the SRNL small scale testing of the ECC process

  7. A Conceptual and Numerical Model for Thermal-Hydrological-Chemical Processes in the Yucca Mountain Drift Scale Test

    International Nuclear Information System (INIS)

    A numerical model was developed to predict the coupled thermal, hydrological, and chemical (THC) processes accompanying the Drift Scale Test (DST) at Yucca Mountain, NV. The DST has been closely monitored through the collection of gas, water, and mineral samples as well as thermal, hydrological, and mechanical measurements. A two-dimensional dual permeability model was developed to evaluate multiphase, multicomponent, reaction-transport processes in the fractured tuff. Comparisons between results using the TOUGHREACT code and measured water (e.g., pH, SiO2(aq), Na+, K+) and gas (CO2) compositions show that the model captures the chemical evolution in the DST. Non-reactive aqueous species (e.g., Cl) show strong dilution in fracture waters, indicating little fracture-matrix interaction. Silica concentrations are higher than in the initial pore water and show a trend of increasing reaction with fracture-lining silicates at higher temperatures. The narrow precipitation zone of predominantly amorphous silica observed above the heaters was also captured

  8. Standard test methods for chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade plutonium dioxide powders and pellets

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade plutonium dioxide powders and pellets to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Plutonium Sample Handling 8 to 10 Plutonium by Controlled-Potential Coulometry Plutonium by Ceric Sulfate Titration Plutonium by Amperometric Titration with Iron(II) Plutonium by Diode Array Spectrophotometry Nitrogen by Distillation Spectrophotometry Using Nessler Reagent 11 to 18 Carbon (Total) by Direct Combustion–Thermal Conductivity 19 to 30 Total Chlorine and Fluorine by Pyrohydrolysis 31 to 38 Sulfur by Distillation Spectrophotometry 39 to 47 Plutonium Isotopic Analysis by Mass Spectrometry Rare Earth Elements by Spectroscopy 48 to 55 Trace Elements by Carrier–Distillation Spectroscopy 56 to 63 Impurities by ICP-AES Impurity Elements by Spark-Source Mass Spectrography 64 to 70 Moisture by the Coulomet...

  9. Final report of the Buffer Mass Test - Volume 3: Chemical and physical stability of the buffer materials

    International Nuclear Information System (INIS)

    The Buffer Mass Test offered a possibility to investigate whether chemical changes took place in the smectite component at heating to 125 degrees C for about one year. The alterations that could possibly take place were a slight charge change in the crystal lattice with an associated precipitation of silica compounds, and a tendency of illite formation. The analysis showed that there were indications of both but to such a slight extent that the processes could not have affected the physical properties, which was also demonstrated by determining the swelling pressure and the hydraulic conductivity. The BMT also showed that the erodibility of bentonite-based buffer materials is less than or about equal to what can be expected on theoretical grounds. (author)

  10. Standard test methods for chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade uranyl nitrate solutions

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1999-01-01

    1.1 These test methods cover procedures for the chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade uranyl nitrate solution to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Determination of Uranium 7 Specific Gravity by Pycnometry 15-20 Free Acid by Oxalate Complexation 21-27 Determination of Thorium 28 Determination of Chromium 29 Determination of Molybdenum 30 Halogens Separation by Steam Distillation 31-35 Fluoride by Specific Ion Electrode 36-42 Halogen Distillate Analysis: Chloride, Bromide, and Iodide by Amperometric Microtitrimetry 43 Determination of Chloride and Bromide 44 Determination of Sulfur by X-Ray Fluorescence 45 Sulfate Sulfur by (Photometric) Turbidimetry 46 Phosphorus by the Molybdenum Blue (Photometric) Method 54-61 Silicon by the Molybdenum Blue (Photometric) Method 62-69 Carbon by Persulfate Oxidation-Acid Titrimetry 70 Conversion to U3O8 71-74 Boron by ...

  11. Development of an in vitro test battery for assessing chemical effects on bovine germ cells under the ReProTect umbrella

    International Nuclear Information System (INIS)

    Current European legislation for the registration and authorisation of chemicals (REACH) will require a dramatic increase in the use of animals for reproductive toxicity testing. Since one objective of REACH is to use vertebrates only as last resort, the development and validation of alternative methods is urgently needed. For this purpose ReProTect, an integrated research project funded by the European Union, joining together 33 partners with complementary expertise in reproductive toxicology, was designed. The study presented here describes a battery of two tests developed within ReProTect. The objective of these tests is the detection of chemical effects during the processes of oocyte maturation and fertilisation in a bovine model. The corresponding toxicological endpoints are the reaching of metaphase II and the formation of the pronuclei respectively. Fifteen chemicals have been tested (Benzo[a]pyrene, Busulfan, Butylparaben, Cadmium Chloride, Carbendazim, Cycloheximide, Diethylstilbestrol, Genistein, Ionomycin, Ketoconazole, Lindane, Methylacetoacetate, Mifepristone, Nocodazole and DMSO as solvent) demonstrating high intra-laboratory reproducibility of the tests. Furthermore, the responses obtained in both tests, for several substances, had a good correlation with the available in vivo and in vitro data. These tests therefore, could predictably become part of an integrated testing strategy that combines the bovine models with additional in vitro tests, in order to predict chemical hazards on mammalian fertility

  12. Evaluation of the L5178Y mouse lymphoma cell mutagenesis assay: intralaboratory results for sixty-three coded chemicals tested at Litton Bionetics, Inc.

    Science.gov (United States)

    Myhr, B C; Caspary, W J

    1988-01-01

    The reliability of the L5178Y TK+/- forward mutation assay as a rapid screen for genotoxicity was evaluated by testing 63 coded chemicals. Replicate treatments were used, and at least two independent experiments were performed for each test condition. The test conditions consisted of no exogenous activation, activation by Aroclor 1254-induced Fischer 344 rat liver S9 homogenate, and in some cases activation by noninduced Fischer 344 rat liver S9. The results were organized into tables that show the mutant colony counts, mutant frequency, and toxicity for each test chemical treatment, positive control treatment, and solvent negative control cultures. The repeat experiments were highly consistent and yielded contradictory evaluations for only a few of the chemicals studied. Fifty-one of the chemicals (81%) were evaluated as mutagenic under one or both of the test conditions. A range in minimum effective concentrations of almost 10(6)-fold (0.008 to 5,000 micrograms/ml) was observed among the mutagenic chemicals. Nine chemicals (14%) were considered to be nonmutagenic. Three chemicals (progesterone, p-rosaniline HCl, and 1,1,1-trichloroethane) gave responses that were not easily evaluated under any test condition: evidence for mutagenesis was obtained in some experiments but not for all repeat studies. Under nonactivation conditions, specifically, the mutagenic activities of 4,4'-bis(dimethylamino)benzophenone, progesterone, and p-rosaniline HCl remained uncertain. With S9 activation, uncertain evidence for mutagenesis was obtained for 2-naphthylamine, progesterone, and 1,1,1-trichloroethane. In some cases, changes in the treatment conditions could lead to different evaluations of the mutagenic activity, and these possibilities are discussed in the descriptive evaluations of each chemical. Comparisons of the observed responses with published results were possible for 29 of the compounds and yielded highly confirmatory evaluations. PMID:3416838

  13. Report on hydro-mechanical and chemical-mineralogical analyses of the bentonite buffer in Canister Retrieval Test

    Energy Technology Data Exchange (ETDEWEB)

    Dueck, Ann; Johannesson, Lars-Erik; Kristensson, Ola; Olsson, Siv [Clay Technology AB (Sweden)

    2011-12-15

    The effect of five years of exposure to repository-like conditions on compacted Wyoming bentonite was determined by comparing the hydraulic, mechanical, and mineralogical properties of samples from the bentonite buffer of the Canister Retrieval Test (CRT) with those of reference material. The CRT, located at the Swedish Aspo Hard Rock Laboratory (HRL), was a full-scale field experiment simulating conditions relevant for the Swedish KBS-3 concept for disposal of high-level radioactive waste in crystalline host rock. The compacted bentonite, surrounding a copper canister equipped with heaters, had been subjected to heating at temperatures up to 95 deg C and hydration by natural Na-Ca-Cl type groundwater for almost five years at the time of retrieval. Under the thermal and hydration gradients that prevailed during the test, sulfate in the bentonite was redistributed and accumulated as anhydrite close to the canister. The major change in the exchangeable cation pool was a loss in Mg in the outer parts of the blocks, suggesting replacement of Mg mainly by Ca along with the hydration with groundwater. Close to the copper canister, small amounts of Cu were incorporated in the bentonite. A reduction of strain at failure was observed in the innermost part of the bentonite buffer, but no influence was seen on the shear strength. No change of the swelling pressure was observed, while a modest decrease in hydraulic conductivity was found for the samples with the highest densities. No coupling was found between these changes in the hydro-mechanical properties and the montmorillonite . the X-ray diffraction characteristics, the cation exchange properties, and the average crystal chemistry of the Na-converted < 1 {mu}m fractions provided no evidence of any chemical/structural changes in the montmorillonite after the 5-year hydrothermal test.

  14. Biological testing and chemical analysis of process materials from an integrated two stage coal liquefaction: a status report

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, B.W.; Buhl, P.; Moroni, E.C.

    1983-07-01

    Samples for chemical characterization and biological testing were obtained from ITSL runs 3LCF7, 3LCF8 and 3LCF9. Chemical analysis of these materials showed that SCT products were composed of fewer compounds than analogous materials from Solvent Refined Coal (SRC) processes. Major components in the SCT materials were three-, four-, five- and six-ring neutral polycyclic aromatic hydrocarbons (PAH). Methyl(C/sub 1/) and C/sub 2/ homologs of these compounds were present in relatively low concentrations, compared to their non-alkylated homologs. Organic nitrogen was primarily in the form of tertiary polycyclic aromatic nitrogen heterocycles and carbazoles. Little or no amino PAH (APAH) or cyano PAH were detected in samples taken during normal PDU operations, however, mutagenic APAH were produced during off-normal operation. Microbial mutagenicity appeared to be due mainly to the presence of APAH which were probably formed in the LC finer due to failure of the catalyst to promote deamination following carbon-nitrogen bond scission of nitrogen-containing hydroaromatics. This failure was observed for the off-normal runs where it was likely that the catalyst had been deactivated. Carcinogenic activity of ITSL materials as assessed by (tumors per animal) in the initiation/promotion mouse skin painting assay was slightly reduced for materials produced with good catalyst under normal operation compared to those collected during recycle of the LC Finer feed. Initiation activity of the latter samples did not appear to be significantly different from that of other coal derived materials with comparable boiling ranges. The observed initiation activity was not unexpected, considering analytical data which showed the presence of four-, five- and six-ring PAH in ITSL materials.

  15. Inter‑laboratory study of human in vitro toxicogenomics‑based tests as alternative methods for evaluating chemical carcinogenicity: a bioinformatics perspective

    OpenAIRE

    Herwig, Ralf; GMUENDER Hans; Corvi, Raffaella; Bloch, K; CASTELL Jose; Ceelen, Liesbeth; Chesne, Christopher; DOKTOROVA Tatyana; Jennen, Danyel G.J.; Jennings, Paul; Limonciel, Alice; LOCK Edward; Mcmorrow, Tara; PHRAKONKHAM Pascal; Radford, R

    2015-01-01

    The assessment of the carcinogenic potential of chemicals with alternative, human-based in vitro systems has become a major goal of toxicogenomics. The central read-out of these assays is the transcriptome and the induced expression changes upon chemical exposure. While many studies exist that describe the transcriptomic responses of such systems, reports on robustness and reproducibility when testing the systems independently in different laboratories are uncommon. Furthermore, there is limi...

  16. Effects of chemical composition and test conditions on the dynamic tensile response of Zr-based metallic glasses

    Science.gov (United States)

    Wang, F.; Laws, K. J.; Trujillo, C. P.; Brown, A. D.; Cerreta, E. K.; Hazell, P. J.; Quadir, M. Z.; Ferry, M.; Escobedo, J. P.

    2015-06-01

    The effects of impact velocity and temperature on the dynamic mechanical behavior of two bulk metallic glasses (BMG) with slightly different elemental compositions (Zr55Cu30Ni5Al30 and Zr46Cu38Ag8Al38) have been investigated. Bullet-shaped samples were accelerated by a gas gun to speeds in the 400 ~ 600m/s range and tested at room temperature and 250 °C. The specimens impacted a steel extrusion die which subjected them to high strains at high strain-rates. The extruded samples were subsequently soft recovered by using low density foams. The deformed specimens were examined by optical and electron microscopy, x-ray diffraction and hardness measurements. The characterization results aided to assess the effect of chemical composition on the microstructural evolution, i.e. phase changes or crystallization, which might influence the ductility on the nominally brittle amorphous BMGs. The most significant results from this study will be presented. School of Engineering and Information Technology, UNSW Canberra.

  17. Evaluation of social competencies in chemical engineering: Application and results of the pilot test (academic year 2012-2013

    Directory of Open Access Journals (Sweden)

    Francisco José Suñé Grande

    2015-06-01

    Full Text Available The Escola Tècnica Superior d’Enginyeria Química has a long tradition in the deployment of social competencies in engineering curricula through Integrated Projects (IP carried out in structured teams. Social competencies are taught and practiced during the development of the IPs. We conceptually introduce a methodology for a 360o assessment of the students’ social competencies, as a tool to foster the improvement of their competency levels. In this article we analyze the results of the pilot test where the aforementioned methodology has been implemented in the Bachelor studies of Chemical Engineering. The results indicate that it is possible to objectively obtain the student’s competency level discriminating among different social competencies, as well as among different students in the same team. The application of this tool fosters the development of specific educative actions to help the students with low competency profile, to reach acceptable levels for a successful insertion in the labor market.

  18. DECOVALEX III PROJECT. Thermal-Chemical Modeling of the Yucca Mountain Project Drift Scale Test. Task 2D Final Report

    International Nuclear Information System (INIS)

    Task 2D concerns numerical simulation of the coupled THC modeling of the DST test at Yucca mountain, with given results for geologic, thermal, hydrologic, mineralogic and petrologic characterization, as-built configuration of the test block of DST, including locations of various sensors and measuring instruments and the plans for heating and cooling, including expected heater powers at various times, and compared with geochemical measurements performed on gas, water, and mineral samples collected from the DST. Two teams of DOE/LBNL (USA) and JNC (Japan) participated the task with different approaches. The LBNL model represented the fractures and rock matrix by a dual-continuum concept, with the mineral-water-gas reactions treated by primarily kinetic and a few equilibrium reactions. The JNC model represented the fractures and matrix as a single effective continuum, with equilibrium mineral-water reactions controlling the chemical evolution (as well as considering aqueous species transport). The JNC team performed the coupled THC simulation of the Yucca Mountain Drift Scale Test by the coupled THM code 'THAMES', mass transport code 'Dtransu' and geochemical code 'PHREEQE' under coupling system code 'COUPLYS'. The LBNL team simulated the THC processes include coupling between heat, water, and vapor flow; aqueous and gaseous species transport; kinetic and equilibrium mineral-water reactions; and feedback of mineral precipitation/dissolution on porosity, permeability, and capillary pressure, with the FDM code TOUGHREACT V3.0. In general, both models capture the temperature evolution in the rock fairly well, although the JNC model yielded a closer match to the initial temperature rise in the rock, probably due to the better site-specific thermal data. Both models showed the contrasting solubility effects of increasing temperature on calcite and silica solubility; yet the dual continuum approach better represented the effects of the boiling and condensation periods on

  19. DECOVALEX III PROJECT. Thermal-Chemical Modeling of the Yucca Mountain Project Drift Scale Test. Task 2D Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Datta, Robin N. [Bechtel SAlC Company, Las Vegas (US)] (comp.)

    2005-02-15

    Task 2D concerns numerical simulation of the coupled THC modeling of the DST test at Yucca mountain, with given results for geologic, thermal, hydrologic, mineralogic and petrologic characterization, as-built configuration of the test block of DST, including locations of various sensors and measuring instruments and the plans for heating and cooling, including expected heater powers at various times, and compared with geochemical measurements performed on gas, water, and mineral samples collected from the DST. Two teams of DOE/LBNL (USA) and JNC (Japan) participated the task with different approaches. The LBNL model represented the fractures and rock matrix by a dual-continuum concept, with the mineral-water-gas reactions treated by primarily kinetic and a few equilibrium reactions. The JNC model represented the fractures and matrix as a single effective continuum, with equilibrium mineral-water reactions controlling the chemical evolution (as well as considering aqueous species transport). The JNC team performed the coupled THC simulation of the Yucca Mountain Drift Scale Test by the coupled THM code 'THAMES', mass transport code 'Dtransu' and geochemical code 'PHREEQE' under coupling system code 'COUPLYS'. The LBNL team simulated the THC processes include coupling between heat, water, and vapor flow; aqueous and gaseous species transport; kinetic and equilibrium mineral-water reactions; and feedback of mineral precipitation/dissolution on porosity, permeability, and capillary pressure, with the FDM code TOUGHREACT V3.0. In general, both models capture the temperature evolution in the rock fairly well, although the JNC model yielded a closer match to the initial temperature rise in the rock, probably due to the better site-specific thermal data. Both models showed the contrasting solubility effects of increasing temperature on calcite and silica solubility; yet the dual continuum approach better represented the effects of

  20. Shake-flask test for determination of biodegradation rates of 14C-labelled chemicals at low concentrations in surface water systems

    DEFF Research Database (Denmark)

    Ingerslev, F.; Nyholm, Niels

    2000-01-01

    ) concentrations in surface water systems. The basic principle of measurement was to determine evolved CO2 indirectly from measurements of total organic activity in subsamples after stripping off their content of CO2, Used with surface water alone the test simulates a pelagic environment and amended with sediments......A simple shake-flask surface water biodegradability die away test with C-14-labeled chemicals added to microgram per liter concentrations (usually 1-100 mu g/L) is described and evaluated. The aim was to provide information on biodegradation behavior and kinetic rates at environmental (low...... (0.1-1 dry weight/L) the test is intended to simulate a water environment with suspended solids (e.g., resuspended sediments). A protocol of the test used with the C-14 technique or with specific chemical analysis was recently developed by the International Organization for Standardization. Practical...

  1. Quality improvement in determination of chemical oxygen demand in samples considered difficult to analyze, through participation in proficiency-testing schemes

    OpenAIRE

    Raposo, Francisco; Fernández-Cegrí, V.; De la Rubia, M.A.; Beltrán, J.; Cavinato, C.; Clinckspoor, M.; Demirer, G.; Diamadopoulos, E.; Frigon, J.C.; Koubova, J.; Launay, M.; Méndez, R.; Menin, G.; Noguerol, J.; Uellendahl, Hinrich

    2010-01-01

    Chemical oxygen demand (COD) is a critical analytical parameter in waste and wastewater treatment, more specifically in anaerobic digestion, although little is known about the quality of measuring COD of anaerobic digestion samples. Proficiency testing (PT) is a powerful tool that can be used to test the performance achievable in the participants laboratories, so we carried out a second PT of COD determination in samples considered ‘‘difficult’’ to analyze (i.e. solid samples and liquid sampl...

  2. 76 FR 65579 - Certain High Production Volume Chemicals; Test Rule and Significant New Use Rule; Fourth Group of...

    Science.gov (United States)

    2011-10-21

    ... bioconcentration factor (BCF) of about 1,000 (Refs. 17, 29, and 30). A chemical substance with a fish BCF value of... are required to show photographic identification, pass through a metal detector, and sign the EPA... there were no other factors that removed the chemical substances from the scope of the HPV Challenge....

  3. Physico-chemical characterization and antibacterial activity of different types of honey tested on strains isolated from hospitalized patients

    Directory of Open Access Journals (Sweden)

    Junie Lia M.

    2016-06-01

    Full Text Available The first aim of the study was to compare the antibacterial activity of several types of honey of different origins, against some bacterial resistant strains. The strains had been isolated from patients. The second aim was to discover the correlations between the antibacterial character of honey and the physico-chemical properties of the honey. Ten honey samples (polyfloral, linden, acacia, manna, and sunflower from the centre of Romania were tested to determine their antibacterial properties against the following bacterial species: Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Staphylococcus epidermidis, Salmonella enterica serovar Typhimurium, Bacillus cereus, Bacillus subtilis, and Listeria monocytogenes. Bacterial cultures in nutrient broth and the culture medium Mueller-Hinton agar were used. The susceptibility to antibiotics was performed using the disk diffusion method. All honey samples showed antibacterial activity on the isolated bacterial strains, in particular polyfloral (inhibition zone 13-21 mm in diameter - because it is the source of several plants, and manna (inhibition zone 13-19.5 mm in diameter, and sunflower (inhibition zone 14-18.5 mm in diameter. Pure honey has a significant antibacterial activity against some bacteria which are resistant to antibiotics. Bacterial strains differed in their sensitivity to honeys. Pseudomonas aeruginosa and Staphylococcus aureus were the most sensitive. The present study revealed that honey antibacterial activity depends on the origin of the honey. We also found that there was a significant correlation between antibacterial activity of honeys and the colour of the honey but not between acidity and pH. The statistical analysis showed that the honey type influences the antibacterial activity (diameter of the bacterial strains inhibition zones.

  4. Chemical and plant tests to assess the viability of amendments to reduce metal availability in mine soils and tailings.

    Science.gov (United States)

    Rodríguez, Luis; Gómez, Rocío; Sánchez, Virtudes; Alonso-Azcárate, Jacinto

    2016-04-01

    The goal of this research was to assess the potential of several industrial wastes to immobilise metals in two polluted soils deriving from an old Pb/Zn mine. Two different approaches were used to assess the performance of different amendments: a chemical one, using extraction by ethylenediaminetetraacetic acid (EDTA), and a biological one, using Lupinus albus as a bio-indicator. Four amendments were used: inorganic sugar production waste (named 'sugar foam', SF), sludge from a drinking water treatment sludge (DWS), organic waste from olive mill waste (OMW) and paper mill sludge (PMS). Amendment to soil ratios ranged from 0.1 to 0.3 (w/w). All the amendments were capable of significantly decreasing (p < 0.05) EDTA-extractable Pb, Zn and Cu concentrations in the two soils used, with decreases in ranges 21-100, 25-100 and 2-100 % for Pb, Zn and Cu, respectively. The amendments tested were also effective in reducing the bioavailability of Pb and Zn for L. albus, which gave rise to a decrease in shoot metal accumulation by the lupine plants compared to that found in the control soil. That decrease reached up to 5.6 and 2.8 times for Pb and Zn, respectively, being statistically significant in most cases. Moreover, application of the OMW, DWS and SF amendments led to higher average values of plant biomass (up to 71 %) than those obtained in the control soil. The results obtained showed the technology put forward to be a viable means of remediating mine soils as it led to a decrease in the availability and toxicity of metals and, thus, facilitated the growth of a vegetation layer. PMID:25772873

  5. A flow-through passive dosing system for continuously supplying aqueous solutions of hydrophobic chemicals to bioconcentration and aquatic toxicity tests

    DEFF Research Database (Denmark)

    Adolfsson-Erici, Margaretha; Åkerman, Gun; Jahnke, Annika;

    2012-01-01

    A continuous supply of water with defined stable concentrations of hydrophobic chemicals is a requirement in a range of laboratory tests such as the OECD 305 protocol for determining the bioconcentration factor in fish. Satisfying this requirement continues to be a challenge, particularly for hyd...

  6. Actual-Waste Tests of Enhanced Chemical Cleaning for Retrieval of SRS HLW Sludge Tank Heels and Decomposition of Oxalic Acid - 12256

    International Nuclear Information System (INIS)

    Savannah River National Laboratory conducted a series of tests on the Enhanced Chemical Cleaning (ECC) process using actual Savannah River Site waste material from Tanks 5F and 12H. Testing involved sludge dissolution with 2 wt% oxalic acid, the decomposition of the oxalates by ozonolysis (with and without the aid of ultraviolet light), the evaporation of water from the product, and tracking the concentrations of key components throughout the process. During ECC actual waste testing, the process was successful in decomposing oxalate to below the target levels without causing substantial physical or chemical changes in the product sludge. During ECC actual waste testing, the introduction of ozone was successful in decomposing oxalate to below the target levels. This testing did not identify physical or chemical changes in the ECC product sludge that would impact downstream processing. The results from these tests confirm observations made by AREVA NP during larger scale testing with waste simulants. This testing, however, had a decreased utilization of ozone, requiring approximately 5 moles of ozone per mole of oxalate decomposed. Decomposition of oxalates in sludge dissolved in 2 wt% OA to levels near 100 ppm oxalate using ECC process conditions required 8 to 12.5 hours without the aid of UV light and 4.5 to 8 hours with the aid of UV light. The pH and ORP were tracked during decomposition testing. Sludge components were tracked during OA decomposition, showing that most components have the highest soluble levels in the initial dissolved sludge and early decomposition samples and exhibit lower soluble levels as OA decomposition progresses. The Deposition Tank storage conditions that included pH adjustment to approximately 1 M free hydroxide tended to bring the soluble concentrations in the ECC product to nearly the same level for each test regardless of storage time, storage temperature, and contact with other tank sludge material. (authors)

  7. 77 FR 41406 - Evaluation of In Vitro Tests for Identifying Eye Injury Hazard Potential of Chemicals and...

    Science.gov (United States)

    2012-07-13

    ... assess the validation status of in vitro tests and integrated non-animal testing strategies proposed for... test and integrated non-animal ] testing strategies proposed for identifying eye injury hazard... ethical human or animal studies or accidental human exposures. DATES: Nominations and test method data...

  8. Laboratory and Field Testing of Commercially Available Detectors for the Identification of Chemicals of Interest in the Nuclear Fuel Cycle for the Detection of Undeclared Activities

    Energy Technology Data Exchange (ETDEWEB)

    Carla Miller; Mary Adamic; Stacey Barker; Barry Siskind; Joe Brady; Warren Stern; Heidi Smartt; Mike McDaniel; Mike Stern; Rollin Lakis

    2014-07-01

    then identified commercial off the shelf (COTS) chemical detectors that may detect the chemicals of interest. Three chemical detectors were selected and tested both in laboratory settings and in field operations settings at Idaho National Laboratory. The instruments selected are: Thermo Scientific TruDefender FT (FTIR), Thermo Scientific FirstDefender RM (Raman), and Bruker Tracer III SD (XRF). Functional specifications, operability, and chemical detectability, selectivity, and limits of detection were determined. Results from the laboratory and field tests will be presented. This work is supported by the Next Generation Safeguards Initiative, Office of Nonproliferation and International Security, National Nuclear Security Administration.

  9. Decommissioning samples from the Ft. Lewis, WA, solvent refined coal pilot plant: chemical analysis and biological testing

    Energy Technology Data Exchange (ETDEWEB)

    Weimer, W.C.; Wright, C.W.

    1985-10-01

    This report presents the results from chemical analyses and limited biological assays of three sets of samples from the Ft. Lewis, WA solvent refined coal (SRC) pilot plant. The samples were collected during the process of decommissioning this facility. Chemical composition was determined for chemical class fractions of the samples by using high-resolution gas chromatography (GC), high-resolution GC/mass spectrometry (MS) and high-resolution MS. Biological activity was measuring using both the histidine reversion microbial mutagenicity assay with Salmonella typhimurium, TA98 and an initiation/promotion mouse-skin tumorigenicity assay. 19 refs., 7 figs., 27 tabs.

  10. Recommended lists of genotoxic and non-genotoxic chemicals for assessment of the performance of new or improved genotoxicity tests: a follow-up to an ECVAM workshop.

    Science.gov (United States)

    Kirkland, David; Kasper, Peter; Müller, Lutz; Corvi, Raffaella; Speit, Günter

    2008-05-31

    At a recent ECVAM workshop considering ways to reduce the frequency of irrelevant positive results in mammalian cell genotoxicity tests [D. Kirkland, S. Pfuhler, D. Tweats, M. Aardema, R. Corvi, F. Darroudi, A. Elhajouji, H.-R. Glatt, P. Hastwell, M. Hayashi, P. Kasper, S. Kirchner, A. Lynch, D. Marzin, D. Maurici, J.-R. Meunier, L. Müller, G. Nohynek, J. Parry, E. Parry, V. Thybaud, R. Tice, J. van Benthem, P. Vanparys, P. White, How to reduce false positive results when undertaking in vitro genotoxicity testing and thus avoid unnecessary followup animal tests: Report of an ECVAM Workshop, Mutat. Res. 628 (2007) 31-55], recommendations for improvements/modifications to existing tests, and suggestions for new assays were made. Following on from this, it was important to identify chemicals that could be used in the evaluation of modified or new assays. An expert panel was therefore convened and recommendations made for chemicals to fit three different sets of characteristics, namely: This paper therefore contains these three recommended lists of chemicals and describes how these should be used for any test-evaluation programme. PMID:18539078

  11. Comparison Study of Manometric Respirometric Test and Common Chemical Methods in the Determination of BOD bold7 in a Pulp and Paper Mill's Wastewaters

    OpenAIRE

    Risto Pöykiö; Hanna Prokkola; Toivo Kuokkanen; Jaakko Rämö; Hannu Nurmesniemi; Katri Roppola

    2006-01-01

    The biological oxygen demand (BOD) test is widely used in many wastewater treatment plants. The conventional BOD tests are usually time-consuming and the results are often out of date for process control purposes. The aim of this research was to compare the manometric respirometric test with common chemical methods in the determination of BOD of wastewater from a pulp and paper mills as well as to evaluate the BOD7 values of both wastewaters from the short-term respirometric measurements. Th...

  12. 薏苡叶化学成分的预试验%The Coix Leaves Chemical Composition of the Pre-test

    Institute of Scientific and Technical Information of China (English)

    谭冰; 黄锁义; 严焕宁; 史柳芝; 吕龙祥

    2014-01-01

    Experimental study on the Guangxi Coix leaves of the chemical composition of pre-test Chemical reaction identification method of production of the Coix leaves water extract , ethanol extract and petroleum ether extract of Guangxi Coix leaves chemical composition of the pretest. Through the pre-test , suggesting that from Guangxi Coix leaves contain flavonoids,Phenolic,Coumarin,Volatile oil,Phytosterol,Carbohydrate,Glycosides, Tannin,Organic acids,Alkaloids and other chemical constituents. This test provided the experimental basis for further biologically active constituents of the plant.%对广西薏苡叶的化学成分进行预试验研究。采用化学反应鉴别法分别对广西产薏苡叶水提取液、乙醇提取液和石油醚提取液进行化学成分预试。通过预试验,提示广西产薏苡叶中可能含有黄酮类、酚类、香豆素类、挥发油、植物甾醇、糖类、苷类、鞣质、有机酸、生物碱等化学成分。此试验为进一步进行该植物的生物活性成分研究提供了实验基础。

  13. Technical note: Validation of a chemical pregnancy test in dairy cows that uses whole blood, shortened incubation times, and visual readout.

    Science.gov (United States)

    Mayo, L M; Moore, S G; Poock, S E; Silvia, W J; Lucy, M C

    2016-09-01

    Chemical pregnancy testing is an alternative to traditional methods of pregnancy diagnosis (either manual palpation or ultrasound) in postpartum dairy cows and heifers. The objective was to validate a chemical pregnancy test that confers the advantages of using whole blood, rapid incubation times, and visual readout. Blood and milk samples were collected from Holstein dairy cows [n=320; 162±62 (mean ± SD) d in milk] on a confinement farm in northeast Missouri at 28 d after artificial insemination (AI). The samples were assayed for pregnancy-associated glycoproteins (PAG) by using a rapid visual test as well as traditional plasma- and milk-based tests. Transrectal ultrasonography diagnosis for pregnancy at 35 to 38 d after AI was the reference (gold) standard for all PAG tests. One hundred fifty-nine cows were diagnosed as pregnant by the reference standard (pregnancies per AI=49.7%). The tests were ELISA and either optical density (OD; measured with a microtiter plate reader; plasma, milk, and rapid visual tests) or visual readout (rapid visual test) were used to diagnose pregnancy. When OD was used, the percentage of pregnant cows classified correctly (sensitivity) for the plasma, milk, and rapid visual tests were 97±1, 96±2, and 95±1% (±SE), respectively. The sensitivity of the rapid visual test when assessed visually was 98±1%. The specificity (proportion of nonpregnant cows classified correctly) for the plasma, milk, and rapid visual was 94±2%, 94±2%, and 93±2% when an OD was used. When read visually, the specificity of the rapid visual test was lesser (85±3%) because some cows with faint visual signals yielded false positive diagnosis. The overall accuracy (proportion of pregnant and nonpregnant cows diagnosed correctly) was similar for all tests (plasma, milk, rapid visual OD, and rapid visual; 96±1, 95±1, 94±1, and 92±2%, respectively). In a second experiment, lactating Holstein cows (n=291) from 4 commercial confinement dairy farms in western

  14. LSENS: A General Chemical Kinetics and Sensitivity Analysis Code for homogeneous gas-phase reactions. Part 3: Illustrative test problems

    Science.gov (United States)

    Bittker, David A.; Radhakrishnan, Krishnan

    1994-01-01

    LSENS, the Lewis General Chemical Kinetics and Sensitivity Analysis Code, has been developed for solving complex, homogeneous, gas-phase chemical kinetics problems and contains sensitivity analysis for a variety of problems, including nonisothermal situations. This report is part 3 of a series of three reference publications that describe LSENS, provide a detailed guide to its usage, and present many example problems. Part 3 explains the kinetics and kinetics-plus-sensitivity analysis problems supplied with LSENS and presents sample results. These problems illustrate the various capabilities of, and reaction models that can be solved by, the code and may provide a convenient starting point for the user to construct the problem data file required to execute LSENS. LSENS is a flexible, convenient, accurate, and efficient solver for chemical reaction problems such as static system; steady, one-dimensional, inviscid flow; reaction behind incident shock wave, including boundary layer correction; and perfectly stirred (highly backmixed) reactor. In addition, the chemical equilibrium state can be computed for the following assigned states: temperature and pressure, enthalpy and pressure, temperature and volume, and internal energy and volume. For static problems the code computes the sensitivity coefficients of the dependent variables and their temporal derivatives with respect to the initial values of the dependent variables and/or the three rate coefficient parameters of the chemical reactions.

  15. Test

    DEFF Research Database (Denmark)

    Bendixen, Carsten

    2014-01-01

    Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers.......Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers....

  16. Significant Breakthrough in Industrial Test of the "Methanol to Olefins" Process Developed by Dalian Institute of Chemical Physics, Chinese Academy of Sciences

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ A process of "Methanol or Dimethylether to Olefins" developed by Dalian Institute of Chemical Physics (DICP), designated as the DMTO process, has attained great success in industrial scaling up testing. DICP, by collaborating with the Xinxing Coal Chemical Co., Ltd. of Shaanxi Province and the Luoyang Petrochemical Engineering Co. of the SINOPEC Group, operated successfully a 50t(methanol)/d unit for the conversion of methanol to lower olefins, with a methanol conversion of close to 100%, and a selectivity to lower olefins(ethylene, propylene and butylenes) of higher than 90%. On 23rd August, the industrial test project has passed a state appraisal. The experts of the Appraisal Group, headed by Prof.

  17. CHEMICAL OIL SPILL DISPERSANTS: UPDATE STATE-OF-THE- ART ON MECHANISM OF ACTION AND LABORATORY TESTING FOR PERFORMANCE

    Science.gov (United States)

    Chemical dispersants are formulations designed to facilitate dispersion of an oil slick into small droplets that disperse to non-problematic concentrations in an underlying water column. This project had two primary objectives: (1) update information on mechanisms of action of ...

  18. Chemical composition analysis and product consistency tests to support enhanced Hanford waste glass models: Results for the January, March, and April 2015 LAW glasses

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Edwards, T. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Riley, W. T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Best, D. R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-09-03

    In this report, the Savannah River National Laboratory provides chemical analyses and Product Consistency Test (PCT) results for several simulated low activity waste (LAW) glasses (designated as the January, March, and April 2015 LAW glasses) fabricated by the Pacific Northwest National Laboratory. The results of these analyses will be used as part of efforts to revise or extend the validation regions of the current Hanford Waste Treatment and Immobilization Plant glass property models to cover a broader span of waste compositions.

  19. Chemical composition analysis and product consistency tests supporting refinement of the Nepheline model for the high aluminum Hanford Glass composition region

    International Nuclear Information System (INIS)

    In this report, SRNL provides chemical analyses and Product Consistency Test (PCT) results for a series of simulated HLW glasses fabricated by Pacific Northwest National Laboratory (PNNL) as part of an ongoing nepheline crystallization study. The results of these analyses will be used to improve the ability to predict crystallization of nepheline as a function of composition and heat treatment for glasses formulated at high alumina concentrations.

  20. Chemical composition analysis and product consistency tests supporting refinement of the Nepheline Model for the high aluminum Hanford glass composition region

    International Nuclear Information System (INIS)

    In this report, Savannah River National Laboratory provides chemical analyses and Product Consistency Test (PCT) results for a series of simulated high level waste (HLW) glasses fabricated by Pacific Northwest National Laboratory (PNNL) as part of an ongoing nepheline crystallization study. The results of these analyses will be used to improve the ability to predict crystallization of nepheline as a function of composition and heat treatment for glasses formulated at high alumina concentrations.

  1. Chemical composition analysis and product consistency tests supporting refinement of the Nepheline model for the high aluminum Hanford Glass composition region

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States); Edwards, T. B. [Savannah River Site (SRS), Aiken, SC (United States); Mcclane, D. L. [Savannah River Site (SRS), Aiken, SC (United States)

    2016-02-17

    In this report, SRNL provides chemical analyses and Product Consistency Test (PCT) results for a series of simulated HLW glasses fabricated by Pacific Northwest National Laboratory (PNNL) as part of an ongoing nepheline crystallization study. The results of these analyses will be used to improve the ability to predict crystallization of nepheline as a function of composition and heat treatment for glasses formulated at high alumina concentrations.

  2. Chemical composition analysis and product consistency tests to support Enhanced Hanford Waste Glass Models. Results for the Augusta and October 2014 LAW Glasses

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Edwards, T. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Best, D. R. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-07-07

    In this report, the Savannah River National Laboratory provides chemical analyses and Product Consistency Test (PCT) results for several simulated low activity waste (LAW) glasses (designated as the August and October 2014 LAW glasses) fabricated by the Pacific Northwest National Laboratory. The results of these analyses will be used as part of efforts to revise or extend the validation regions of the current Hanford Waste Treatment and Immobilization Plant glass property models to cover a broader span of waste compositions.

  3. Chemical composition analysis and product consistency tests supporting refinement of the Nepheline Model for the high aluminum Hanford glass composition region

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Edwards, T. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Mcclane, D. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-03-01

    In this report, Savannah River National Laboratory provides chemical analyses and Product Consistency Test (PCT) results for a series of simulated high level waste (HLW) glasses fabricated by Pacific Northwest National Laboratory (PNNL) as part of an ongoing nepheline crystallization study. The results of these analyses will be used to improve the ability to predict crystallization of nepheline as a function of composition and heat treatment for glasses formulated at high alumina concentrations.

  4. Seismic waves travel-time curve, basing on the results of signal detection from chemical explosions detonated at Semipalatinsk Test Site

    International Nuclear Information System (INIS)

    A large amount of digital seismic data from the permanent and temporary seismic stations was acquired in the result of detonation of large chemical explosions at Semipalatinsk Test Site. All the records were collected, systematized and processed, and databases were created. Travel-time curves for regional Pn, Pg, Sn and Lg waves were created and compared with the ones used in routine earthquake processing practice. (author)

  5. Operational overview of NASA GTE/CITE 1 airborne instrument intercomparisons - Carbon monoxide, nitric oxide, and hydroxyl instrumentation. [Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation

    Science.gov (United States)

    Beck, Sherwin M.; Bendura, Richard J.; Mcdougal, David S.; Hoell, James M., Jr.; Gregory, Gerald L.; Sachse, Glen W.; Hill, Gerald F.; Curfman, Howard J., Jr.; Torres, Arnold L.; Condon, Estelle P.

    1987-01-01

    An overview of the airborne intercomparisons of CO, NO, and OH instrumentation is presented in this first paper of the series on the NASA Global Tropospheric Experiment/Chemical Instrumentation Test and Evaluation (GTE/CITE 1). This paper provides the reader with background information about several important characteristics of the project. These include the overall objectives and approach, the measurements taken, the intercomparison protocol, aircraft platform, profiles of each aircraft flight, and the participants. A synopsis of the overall results of the CO, NO, and OH instrument intercomparisons is also included. Companion papers discuss the detailed results of the CO and NO intercomparison tests as well as pertinent scientific findings.

  6. Quality improvement in determination of chemical oxygen demand in samples considered difficult to analyze, through participation in proficiency-testing schemes

    DEFF Research Database (Denmark)

    Raposo, Francisco; Fernández-Cegrí, V.; De la Rubia, M.A.;

    2010-01-01

    test the performance achievable in the participants laboratories, so we carried out a second PT of COD determination in samples considered ‘‘difficult’’ to analyze (i.e. solid samples and liquid samples with high concentrations of suspended solids). The results obtained (based on acceptable z......Chemical oxygen demand (COD) is a critical analytical parameter in waste and wastewater treatment, more specifically in anaerobic digestion, although little is known about the quality of measuring COD of anaerobic digestion samples. Proficiency testing (PT) is a powerful tool that can be used to...

  7. Chemical compatibility of B-4C/Na/S.S. system. Pt.2: Effects of test period and oxygen content in sodium

    International Nuclear Information System (INIS)

    The simulation specimens of the fast breeder reactor' control rod were put into the thermal convection sodium loop, and the out of pile tests for B4C/Na/S.S. system chemical compatibility were performed at 550 degree C, and the effects of the test period and oxygen content in sodium on the compatibility characters were investigated. The appearance of B4C pellets is integral, and crack or break are not found after compatible test. There is B penetration in cladding inner surface, the amount of B penetration is proportional to the square root of the test period. The depth of B penetration is not changed with the add of the test period. The microhardness at the cladding inner surface increases clearly, its increment is increasing slightly with the add of the test period. The depth of the hardening layers is about 40 μm for different test periods. The reaction products Cr2B, Na4B10O17, B6Fe23, CrB, Nib and NiB12 are formed according to priority at the cladding inner surface for 80 to 400 d. The diffusion of B into the cladding relates to the temperature, test period and the oxygen content, and the oxygen promotes the B diffusion

  8. Eye Irritation Test (EIT) for Hazard Identification of Eye Irritating Chemicals using Reconstructed Human Cornea-like Epithelial (RhCE) Tissue Model.

    Science.gov (United States)

    Kaluzhny, Yulia; Kandárová, Helena; d'Argembeau-Thornton, Laurence; Kearney, Paul; Klausner, Mitchell

    2015-01-01

    To comply with the Seventh Amendment to the EU Cosmetics Directive and EU REACH legislation, validated non-animal alternative methods for reliable and accurate assessment of ocular toxicity in man are needed. To address this need, we have developed an eye irritation test (EIT) which utilizes a three dimensional reconstructed human cornea-like epithelial (RhCE) tissue model that is based on normal human cells. The EIT is able to separate ocular irritants and corrosives (GHS Categories 1 and 2 combined) and those that do not require labeling (GHS No Category). The test utilizes two separate protocols, one designed for liquid chemicals and a second, similar protocol for solid test articles. The EIT prediction model uses a single exposure period (30 min for liquids, 6 hr for solids) and a single tissue viability cut-off (60.0% as determined by the MTT assay). Based on the results for 83 chemicals (44 liquids and 39 solids) EIT achieved 95.5/68.2/ and 81.8% sensitivity/specificity and accuracy (SS&A) for liquids, 100.0/68.4/ and 84.6% SS&A for solids, and 97.6/68.3/ and 83.1% for overall SS&A. The EIT will contribute significantly to classifying the ocular irritation potential of a wide range of liquid and solid chemicals without the use of animals to meet regulatory testing requirements. The EpiOcular EIT method was implemented in 2015 into the OECD Test Guidelines as TG 492. PMID:26325674

  9. Validation and assessment of uncertainty of chemical tests as a tool for the reliability analysis of wastewater IPEN

    International Nuclear Information System (INIS)

    The validation of analytical methods has become an indispensable tool for the analysis in chemical laboratories, including being required for such accreditation. However, even if a laboratory using validated methods of analysis there is the possibility that these methods generate results discrepant with reality by making necessary the addition of a quantitative attribute (a value) which indicates the degree of certainty the extent or the analytical method used. This measure assigned to the result of measurement is called measurement uncertainty. We estimate this uncertainty with a level of confidence both direction, an analytical result has limited significance if not carried out proper assessment of its uncertainty. One of the activities of this work was to elaborate a program to help the validation and evaluation of uncertainty in chemical analysis. The program was developed with Visual Basic programming language and method of evaluation of uncertainty introduced the following concepts based on the GUM (Guide to the Expression of Uncertainty in Measurement). This evaluation program uncertainty measurement will be applied to chemical analysis in support of the characterization of the Nuclear Fuel Cycle developed by IPEN and the study of organic substances in wastewater associated with professional activities of the Institute. In the first case, primarily for the determination of total uranium and the second case for substances that were generated by human activities and that are contained in resolution 357/2005. As strategy for development of this work was considered the PDCA cycle to improve the efficiency of each step and minimize errors while performing the experimental part. The program should be validated to meet requirements of standards such as, for example, the standard ISO/IEC 17025. The application, it is projected to use in other analytical procedures of both the Nuclear Fuel Cycle and in the control program and chemical waste management of IPEN

  10. The added value of the 90-day repeated dose oral toxicity test for industrial chemicals with a low (sub)acute toxicity profile in a high quality dataset.

    Science.gov (United States)

    Taylor, Katy; Andrew, David J; Rego, Laura

    2014-08-01

    A survey conducted on the EU Notification of New Substances (NONS) database suggested that for industrial chemicals with a profile of low toxicity in (sub)acute toxicity tests there is little added value to the conduct of the 90-day repeated dose study. Avoiding unnecessary animal testing is a central aim of the EU REACH chemicals legislation; therefore we sought to verify the profile using additional data. The OECD's eChemPortal was searched for substances that had both a 28-day and a 90-day study and their robust study summaries were then examined from the ECHA CHEM database. Out of 182 substances with high quality 28-day and 90-day study results, only 18 reported no toxicity of any kind in the (sub)acute tests. However, for 16 of these there were also no reported signs of toxicity at or close to the limit dose (1000mg/kgbw/d) in the 90-day study. Restricting the 'low (sub)acute toxicity in a high quality dataset' profile to general industrial chemicals of no known biological activity, whilst allowing irritant substances, increases the data set and improves the prediction to 95% (20 substances out of 21 substances). The low toxicity profile appears to be of low prevalence within industrial chemicals (10-15%), nevertheless, avoidance of the conduct of a redundant 90-day study for this proportion of the remaining REACH phase-in substances would avoid the use of nearly 50,000 animals and save industry 50million Euros, with no impact on the assessment of human health. PMID:24768988

  11. Selection of suitable stainless steels for nuclear reprocessing plants: application of chemical and electrochemical testing methods to austenitic CrNi steel AISI type 304L in various chemical compositions

    International Nuclear Information System (INIS)

    DIN Standard Huey testing has been performed in boiling 14.4n nitric acid during 5-15 periods (240-720 h) for selection of appropriate nitric acid resistant materials for nuclear fuel reprocessing applications. The paper describes the testing process during which the intermediate and final results of metal loss by dissolution are directly transferred from the balance to the computer, stored and activated - besides material properties data - for documentation purposes. Further routine evaluation of these experiments includes metallography in cross-section and surface microscopy to look after uniform and local metal dissolution phenomena and their relationship to the bulk structure. A large variety of materials have been tested this way through the last years. It was shown how sensitively the chosen testing conditions are able to differ between materials of the same nominal composition AISI 304L/Material No. 1.4306 in different contents of residual elements. Especially, for the purest electroslag-molten steel (ESU) results of parameter studies concerning the influence of sensitization, cold deformation, grain size and sheet thickness (in respect to end grain attack) are given. Within an attempt to define faster methods of corrosion testing, e.g. to differ within a group of materials of similar composition, but different corrosion behaviour, electrochemical tests in heated nitric acid were performed under potentiostatic conditions. The necessary electrochemical equipment and the results of its application by potentiostatic tests on AISI 304L in above mentioned three chemical compositions at 1250 mV, 14n HNO3 are presented. The evaluation by light and electron microscopy of the corroded surfaces, supported by measurements of current density, weight change, metallography and surface roughness, proved that within one hour a remarkable differentiation of the corrosion behaviour took place which can serve as a basis of materials preselection and to diminish the extent of

  12. Two-stage coal liquefaction process materials from the Wilsonville Facility operated in the nonintegrated and integrated modes: chemical analyses and biological testing

    Energy Technology Data Exchange (ETDEWEB)

    Later, D.W.

    1985-01-01

    This document reports the results from chemical analyses and biological testing of process materials sampled during operation of the Wilsonville Advanced Coal Liquefaction Research and Development Facility (Wilsonville, Alabama) in both the noncoupled or nonintegrated (NTSL Run 241) and coupled or integrated (ITSL Run 242) two-stage liquefaction operating modes. Mutagenicity and carcinogenicity assays were conducted in conjunction with chromatographic and mass spectrometric analyses to provide detailed, comparative chemical and biological assessments of several NTSL and ITSL process materials. In general, the NTSL process materials were biologically more active and chemically more refractory than analogous ITSL process materials. To provide perspective, the NTSL and ITSL results are compared with those from similar testing and analyses of other direct coal liquefaction materials from the solvent refined coal (SRC) I, SRC II and EDS processes. Comparisons are also made between two-stage coal liquefaction materials from the Wilsonville pilot plant and the C.E. Lummus PDU-ITSL Facility in an effort to assess scale-up effects in these two similar processes. 36 references, 26 figures, 37 tables.

  13. Study on HIx cycling techniques for thermo chemical hydrogen production process. R and D on refractory and corrosion resistant pressure sensor for hydrogen iodide cycling test loop

    International Nuclear Information System (INIS)

    High refractory and corrosion resistant pressure sensor with tantalum/SUS 316 welding type diaphragm has been developed for hydrogen iodide cycling test in thermo chemical hydrogen production process and tested its fatigue and corrosion properties. With these results, the following conclusions were derived. (1) New type of high refractory and corrosion resistant alloy was found in Ta/SUS 316 welding region and its elemental composition was identified as 83Ta-11Fe-2Ni-2Cr-2Mo [wt.%]. (2) This pressure sensor achieved a new record of the longest fatigue life over 107 cycles within 0.44%F.S./degC and (3) No degradation of its mechanical and sensitivity properties was found after 20000 hours hydrogen iodide cycling test. (author)

  14. Test-methods of chemical analysis with visual and scanner indication in ecoanalytical monitoring of nature reservoirs of Kirovograd region

    Directory of Open Access Journals (Sweden)

    Y. V. Bokhan

    2007-03-01

    Full Text Available The features of test analysis with visual and scanner indication for the exposure and semiquantitative determination of general pollutants and indices of water bodies’ quality are considered. Evaluation of some metrological descriptions of the known test-methods of pH determination, concentrations of the dissolved oxygen, nitrate- and phosphate-ions, ions of iron with visual and computer scanner-technologies using is offered.

  15. Design, testing, fabrication and launch support of a liquid chemical barium release payload (utilizing the liquid fluorine-barium salt/hydrazine system)

    Science.gov (United States)

    Stokes, C. S.; Smith, E. W.; Murphy, W. J.

    1972-01-01

    A payload was designed which included a cryogenic oxidizer tank, a fuel tank, and burner section. Release of 30 lb of chemicals was planned to occur in 2 seconds at the optimum oxidizer to fuel ratio. The chemicals consisted of 17 lb of liquid fluorine oxidizer and 13 lb of hydrazine-barium salt fuel mixture. The fuel mixture was 17% barium chloride, 16% barium nitrate, and 67% hydrazine, and contained 2.6 lb of available barium. Two significant problem areas were resolved during the program: explosive valve development and burner operation. The release payload was flight tested, from Wallops Island, Virginia. The release took place at an altitude of approximately 260 km. The release produced a luminous cloud which expanded very rapidly, disappearing to the human eye in about 20 seconds. Barium ion concentration slowly increased over a wide area of sky until measurements were discontinued at sunrise (about 30 minutes).

  16. Chemical Mahjong

    Science.gov (United States)

    Cossairt, Travis J.; Grubbs, W. Tandy

    2011-01-01

    An open-access, Web-based mnemonic game is described whereby introductory chemistry knowledge is tested using mahjong solitaire game play. Several tile sets and board layouts are included that are themed upon different chemical topics. Introductory tile sets can be selected that prompt the player to match element names to symbols and metric…

  17. Chemical Compound Gynecology, ToxinTest (Brine Shrimp Lethality Test) and Antioxidants (1,1-Diphenyl-2-Pikrilhydrazyl) from Saga Leaf Extract (Abrus Precatorius L.)

    OpenAIRE

    Yuhernita; Delvi Osmeli; Juniarti

    2009-01-01

    Cytotoxicity effects and antioxidant activities of saga(Abrus precatorius L.) extract were studied by using Brine Shrimp Lethality Test and 1,1-diphenyl-2-pikrilhydrazylassays. Saga was extracted with different solvents i.e n-hexane, ethyl acetate and methanol. Result showed that themethanolic extract of saga had been potential to be cytotoxic againts Brine Shrimp with LC50 value of 606.736 ppm.However, all the extract of saga did not have antioxidant activities.

  18. Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test. 2. ed.

    International Nuclear Information System (INIS)

    This part of ISO 11140 specifies the requirements for chemical indicators to be used in the steam penetration test for steam sterilizers for wrapped goods, e.g. instruments and porous materials. The indicator for this purpose is a Class 2 indicator as described in ISO 11140-1. Indicators complying with this part of ISO 11140 are intended for use in combination with the standard test pack as described in EN 285. This part of ISO 11140 does not consider the performance of the standard test pack, but does specify the performance of the indicator systems.The paper provides information on scope, normative references, terms and definitions, general requirements, indicator system format, performance requirements, packaging and labelling and quality assurance. 11 annexes report on the determination of strength after steam sterilization, the estimation of visual difference between colour of the substrate and the changed (or unchanged) indicator system by determination of relative reflectance density, the determination of indicator colour change on exposure to dry saturated steam, the determination of indicator colour change on exposure to dry heat, the accelerated ageing of test samples, the determination of transfer of indicator to standard test pack on processing, the determination of shelf life of the product, the steam exposure apparatus, the determination of sensitivity of the indicator to the presence of air, the air injection system and the standard test pack. Finally a bibliography is provided.

  19. Testing insecticidal activity of novel chemically synthesized siRNA against Plutella xylostella under laboratory and field conditions.

    Directory of Open Access Journals (Sweden)

    Liang Gong

    Full Text Available BACKGROUND: Over the last 60 years, synthetic chemical pesticides have served as a main tactic in the field of crop protection, but their availability is now declining as a result of the development of insect resistance. Therefore, alternative pest management agents are needed. However, the demonstration of RNAi gene silencing in insects and its successful usage in disrupting the expression of vital genes opened a door to the development of a variety of novel, environmentally sound approaches for insect pest management. METHODOLOGY/PRINCIPAL FINDINGS: Six small interfering RNAs (siRNAs were chemically synthesized and modified according to the cDNA sequence of P. xylostella acetylcholine esterase genes AChE1 and AChE2. All of them were formulated and used in insecticide activity screening against P. xylostella. Bioassay data suggested that Si-ace1_003 and Si-ace2_001 at a concentration of 3 µg cm(-2 displayed the best insecticidal activity with 73.7% and 89.0%, mortality, respectively. Additional bioassays were used to obtain the acute lethal concentrations of LC50 and LC90 for Si-ace2_001, which were 53.66 µg/ml and 759.71 µg/ml, respectively. Quantitative Real-time PCR was used to confirm silencing and detected that the transcript levels of P. xylostella AChE2 (PxAChE2 were reduced by 5.7-fold compared to the control group. Consequently, AChE activity was also reduced by 1.7-fold. Finally, effects of the siRNAs on treated plants of Brassica oleracea and Brassica alboglabra were investigated with different siRNA doses. Our results showed that Si-ace2_001 had no negative effects on plant morphology, color and growth of vein under our experimental conditions. CONCLUSIONS: The most important finding of this study is the discovery that chemically synthesized and modified siRNA corresponding to P. xylostella AChE genes cause significant mortality of the insect both under laboratory and field conditions, which provides a novel strategy to control P

  20. A pre-validation trial - testing genotoxicity of several chemicals using standard, medium- and high-throughput comet formats.

    Directory of Open Access Journals (Sweden)

    Kristine Bjerve Gutzkow

    2015-06-01

    Results obtained with the three systems (standard, medium- and high-throughput were essentially the same. The 96-minigel format was analysed with the fully automated scoring system IMSTAR and comparable results were achieved with the semi-automated scoring system from Perceptives. The known genotoxic chemicals MNU, B(aP, 4-NQO and cyclophosphamide showed little consistent sign of genotoxicity at concentrations causing limited cytotoxicity. D-mannitol and Triton X-100 were, as expected, non-genotoxic (though Triton X-100, at high concentrations, caused DNA breaks as an apparent secondary effect of cytotoxicity. Etoposide and bleomycin gave significant increase in DNA strand break at borderline cytotoxic concentrations. The limitation of the assay to detect damaged bases by known genotoxins may be overcome by incorporating a DNA repair enzyme, such as formamidopyrimidine-DNA-glycosylase (FPG, to convert damaged bases into breaks as shown by Azqueta A et al., Mutagenesis vol. 28 no. 3 pp. 271–277, 2013 .

  1. Results of performance tests on chemical and radiation measurement systems for use at a dig-face

    International Nuclear Information System (INIS)

    Chemical and radiation measurement systems are being developed for use at a dig-face to provide sensing capability during the excavation of previously buried waste. it is believed that on-line dig-face characterization will reduce environmental, health, and safety risks during the cleanup of buried waste sites as well as improve the efficiency of the cleanup process. This report describes progress in the development of three measurement systems: (a) a γ/neutron monitor that scans the dig-face for high levels of radiation prior to excavation, (b) a Ge spectrometer that identifies specific radionuclides located with the γ/neutron monitor, and (c) a prompt γ neutron activation analysis (PGNAA) system that measures the presence of chlorine and chlorinated compounds often associated with hazardous waste. The Ge spectrometer and PGNAA system also will provide off-line but on-site capability of radionuclide and elemental identification of excavated waste prior to handling, treatment, transportation, or disposal

  2. Patch testing with a new fragrance mix - reactivity to the individual constituents and chemical detection in relevant cosmetic products

    DEFF Research Database (Denmark)

    Frosch, Peter J; Rastogi, Suresh C; Pirker, Claudia;

    2005-01-01

    test (ROAT) of FM II are described. Furthermore, cosmetic products which had caused a contact dermatitis in patients were analysed for the presence of the individual constituents. In 1701 patients, the individual constituents of the medium (14%) and the highest (28%) concentration of FM II were...

  3. Chemical composition analysis and product consistency tests to support enhanced Hanford waste glass models. Results for the third set of high alumina outer layer matrix glasses

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States); Edwards, T. B. [Savannah River Site (SRS), Aiken, SC (United States)

    2015-12-01

    In this report, the Savannah River National Laboratory provides chemical analyses and Product Consistency Test (PCT) results for 14 simulated high level waste glasses fabricated by the Pacific Northwest National Laboratory. The results of these analyses will be used as part of efforts to revise or extend the validation regions of the current Hanford Waste Treatment and Immobilization Plant glass property models to cover a broader span of waste compositions. The measured chemical composition data are reported and compared with the targeted values for each component for each glass. All of the measured sums of oxides for the study glasses fell within the interval of 96.9 to 100.8 wt %, indicating recovery of all components. Comparisons of the targeted and measured chemical compositions showed that the measured values for the glasses met the targeted concentrations within 10% for those components present at more than 5 wt %. The PCT results were normalized to both the targeted and measured compositions of the study glasses. Several of the glasses exhibited increases in normalized concentrations (NCi) after the canister centerline cooled (CCC) heat treatment. Five of the glasses, after the CCC heat treatment, had NCB values that exceeded that of the Environmental Assessment (EA) benchmark glass. These results can be combined with additional characterization, including X-ray diffraction, to determine the cause of the higher release rates.

  4. Chemical composition analysis and product consistency tests to support enhanced Hanford waste glass models. Results for the third set of high alumina outer layer matrix glasses

    International Nuclear Information System (INIS)

    In this report, the Savannah River National Laboratory provides chemical analyses and Product Consistency Test (PCT) results for 14 simulated high level waste glasses fabricated by the Pacific Northwest National Laboratory. The results of these analyses will be used as part of efforts to revise or extend the validation regions of the current Hanford Waste Treatment and Immobilization Plant glass property models to cover a broader span of waste compositions. The measured chemical composition data are reported and compared with the targeted values for each component for each glass. All of the measured sums of oxides for the study glasses fell within the interval of 96.9 to 100.8 wt %, indicating recovery of all components. Comparisons of the targeted and measured chemical compositions showed that the measured values for the glasses met the targeted concentrations within 10% for those components present at more than 5 wt %. The PCT results were normalized to both the targeted and measured compositions of the study glasses. Several of the glasses exhibited increases in normalized concentrations (NCi) after the canister centerline cooled (CCC) heat treatment. Five of the glasses, after the CCC heat treatment, had NCB values that exceeded that of the Environmental Assessment (EA) benchmark glass. These results can be combined with additional characterization, including X-ray diffraction, to determine the cause of the higher release rates.

  5. Study on the correlation of toughness with chemical composition and tensile test results in microalloyed API pipeline steels

    Directory of Open Access Journals (Sweden)

    Pouraliakbar H.

    2015-01-01

    Full Text Available In this investigation, an artificial neural network model with feed forward topology and back propagation algorithm was developed to predict the toughness (area underneath of stress-strain curve of high strength low alloy steels. The inputs of the neural network included the weight percentage of 15 alloying elements and the tensile test results such as yield strength, ultimate tensile strength and elongation. Developing the model, 118 different steels from API X52 to X70 grades were used. The developed model was validated with 26 other steels from the data set that were not used for the model development. Additionally, the model was also employed to predict the toughness of 26 newly tested steels. The predicted values were in very good agreement with the measured ones indicating that the developed model was very accurate and had the great ability for predicting the toughness of pipeline steels.

  6. Improving of the teaching methods of chemical subjects by using of teaching tests in high educational institutions

    Directory of Open Access Journals (Sweden)

    Gulzahira Turebekova

    2015-03-01

    Full Text Available Using the information technologies may cause great pedagogical effect: using of computer opens the opportunity for organization of problem teaching developing the creative thinking, forming research, practical skills of students, creation of the steady positive motivation of the students. Technical facilities of the computer technology allow solving the teaching and research tasks in the chemistry come as original catalyst of creation of different types of information technology systems and projection on their basis the novel ways and methods of their application. Use of computer technology in education helps to support necessary educational level of students and pay attention to their independent work. The article represents that the computer testing can be widely used for control of knowledge and for teaching. Teaching testing arouses interest in subject and develops ability of self-preparation and self – education, provides in-door and out- door work.

  7. Assessment of long term mining waste behavior by a dynamic leaching test : application to contrasted physico-chemical conditions

    OpenAIRE

    Badreddine, Rabia; Brunel, Célia; Munoz, Marguerite; Destrigneville, Christine

    2008-01-01

    Mining activity has generated large amounts of mining wastes abandoned on the site after extraction, concentration or metallurgic processes. In this study assessment of the long term behaviour of mining wastes has been performed by the realisation of a dynamic leaching test performed with a Soxhlet device on mining wastes from two contrasted sites : Bentaillou and Saint-Salvy from south-west France. Sphalerite and galena are the source of heavy metals, (Zn, Cd and Pb) in both sites. Pyrite an...

  8. Standard test method for determining effects of chemical admixtures on corrosion of embedded steel reinforcement in concrete exposed to chloride environments

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 This test method covers a procedure for determining the effects of chemical admixtures on the corrosion of metals in concrete. This test method can be used to evaluate materials intended to inhibit chloride-induced corrosion of steel in concrete. It can also be used to evaluate the corrosivity of admixtures in a chloride environment. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  9. Shake-flask test for determination of biodegradation rates of 14C-labelled chemicals at low concentrations in surface water systems

    DEFF Research Database (Denmark)

    Ingerslev, F.; Nyholm, Niels

    2000-01-01

    A simple shake-flask surface water biodegradability die away test with C-14-labeled chemicals added to microgram per liter concentrations (usually 1-100 mu g/L) is described and evaluated. The aim was to provide information on biodegradation behavior and kinetic rates at environmental (low......) concentrations in surface water systems. The basic principle of measurement was to determine evolved CO2 indirectly from measurements of total organic activity in subsamples after stripping off their content of CO2, Used with surface water alone the test simulates a pelagic environment and amended with sediments...... regular reinoculation with freshly collected surface water could, however, overcome the problems of false-negative results. (C) 2000 Academic Press....

  10. The chemical composition of White Dwarfs as a test of convective efficiency during core He-burning

    CERN Document Server

    Straniero, O; Imbriani, G; Piersanti, L; Straniero, Oscar; Dominguez, Inma; Imbriani, Gianluca; Piersanti, Luciano

    2003-01-01

    Pulsating white dwarfs provide constraints to the evolution of progenitor stars. We revise He-burning stellar models, with particular attention to core convection and to its connection with the nuclear reactions powering energy generation and chemical evolution Theoretical results are compared to the available measurements for the variable white dwarf GD 358, which indicate a rather large abundance of central oxygen. We show that the attempt to constrain the relevant nuclear reaction rate by means of the white dwarf composition is faced with a large degree of uncertainty related to evaluating the efficiency of convection-induced mixing.By combining the uncertainty of the convection theory with the error on the relevant reaction rate we derive that the present theoretical prediction for the central oxygen mass fraction in white dwarfs varies between 0.3 and 0.9. Unlike previous claims, we find that models taking into account semiconvection and a moderate C12(alpha,gamma)O16 reaction rate are able to account fo...

  11. A Roadmap for Hazard Monitoring and Risk Assessment of Marine Biotoxins on the Basis of Chemical and Biological Test Systems

    OpenAIRE

    Daneshian, Mardas; Botana, Luis M.; Dechraoui Bottein, Marie-Yasmine; Buckland, Gemma; Campàs, Mònica; Dennison, Ngaire; Dickey, Robert W.; Diogène, Jorge; Fessard, Valérie; Hartung, Thomas; Humpage, Andrew; Leist, Marcel; Molgó, Jordi; Michael A. Quilliam; Rovida, Costanza

    2013-01-01

    Aquatic food accounts for over 40% of global animal food products, and the potential contamination with toxins of algal origin – marine biotoxins – poses a health threat for consumers. The gold standards to assess toxins in aquatic food have traditionally been in vivo methods, i.e., the mouse as well as the rat bioassay. Besides ethical concerns, there is also a need for more reliable test methods because of low inter-species comparability, high intra-species variability, the high number of f...

  12. An information-rich alternative, chemicals testing strategy using a high definition toxicogenomics and zebrafish (Danio rerio) embryos.

    Science.gov (United States)

    Sawle, Ashley D; Wit, Ernst; Whale, Graham; Cossins, Andrew R

    2010-11-01

    Large-scale toxicogenomic screening approaches offer great promise for generating a bias-free system-wide view of toxicological effects and modes-of-action of chemicals and ecotoxicants. However, early applications of microarray technology have identified relatively small groups of responding genes with which to define new targets for analysis by conventional means. We have trialled a more intensive approach to the design and interpretation of array experiments incorporating a balanced interwoven ANOVA design with higher levels of biological replication, a more thorough analysis of errors and false discovery rates, and an analysis of response patterns using gene network models. Zebrafish embryos were exposed from 1.5 h post-fertilization for 72 h to ecotoxicants representing different classes--2,4-dichlorophenol, 3,4-dichloroaniline, pentachlorophenol, and cadmium chloride--at low concentrations producing a developmental disturbance to 10% of embryos and half of this dose. Extracted whole embryo RNA was then analyzed on microarrays. Analysis revealed responses of 3000-5000 genes, which is 10-1000 times greater than previously reported, with significance at lower levels of fold change. Some gene responses were common to multiple toxicants, and others were restricted to just one or two toxicants. The gene expression profiles for the different toxicants were distinctive, and analysis using network-based models provided a high level of detail of affected processes, some of which were novel. This approach provides a more highly refined view of toxic effects, from which meaningful patterns of response can be discerned and related to functional deficits and from which more reliable indicators of toxicological effect can be predicted. PMID:20702589

  13. Chemical fractionation tests on South African coal sources to obtain species-specific information on ash fusion temperatures (AFT)

    Energy Technology Data Exchange (ETDEWEB)

    J.C. van Dyk; L.L. Baxter; J.H.P. van Heerden; R.L.J. Coetzer [Sasol Technology, Sasolburg (South Africa). Syngas and Coal Technologies, R& amp; D Division

    2005-10-01

    Detailed coal and feedstock characteristics are essential to predict gasification performance when a specific coal source is to be gasified. One property that specifically gives detail information on the suitability of a coal source for gasification purposes is the ash fusion temperature (AFT). The AFT of a coal source indicates the extent to which ash agglomeration and ash clinkering are likely to occur within the gasifier. The principal aim of this paper is to obtain mineral species-specific information on ash properties and the specific affect on AFT. Chemical fractionation treatment resulted in coals having different mineral properties that can be used to explain the affect of specific minerals on the AFT of coal. The highest concentration and species of minerals were removed from the coal by acid leaching (HCl and HNO{sub 3}) where Al, Ca, Mg, Na and Fe were removed in high concentrations from the coal. The AFT of coal after leaching increased to {gt}1600{sup o}C. Based on the 95% confidence intervals depicted the following components can be highlighted as having a statistical significant effect on the AFT: Al{sub 2}O{sub 3}, Fe{sub 2}O{sub 3}, CaO, MgO, P{sub 2}O{sub 5} and SiO{sub 2}-Al{sub 2}O{sub 3} combination. When mineral ratio was used, the best correlation coefficient ) with AFT was obtained with the dolomite ratio. This is in agreement with the results obtained from the correlations between the AFT and the ash composition where CaO and MgO resulted in the best correlation with AFT. Results presented in this paper again highlights the fact and confirmed work from other researchers that ash composition (elemental analyses) on its own does not explain AFT behavior or commercial performance of coal accurately. 14 refs., 6 figs., 6 tabs.

  14. Standard test methods for chemical analysis of ceramic whiteware materials using wavelength dispersive X-Ray fluorescence spectrometry

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2004-01-01

    1.1 These test methods cover the determination of ten major elements (SiO2, Al2O3, Fe2O3, MgO, CaO, Na2O, K2O, TiO2, P2O5, MnO, and LOI in ceramic whitewares clays and minerals using wavelength dispersive X-ray fluorescence spectrometry (WDXRF). The sample is first ignited, then fused with lithium tetraborate and the resultant glass disc is introduced into a wavelength dispersive X-ray spectrometer. The disc is irradiated with X-rays from an X-ray tube. X-ray photons emitted by the elements in the samples are counted and concentrations determined using previously prepared calibration standards. (1) In addition to 10 major elements, the method provides a gravimetric loss-on-ignition. Note 1—Much of the text of this test method is derived directly from Major element analysis by wavelength dispersive X-ray fluorescence spectrometry, included in Ref (1). 1.2 Interferences, with analysis by WDXRF, may result from mineralogical or other structural effects, line overlaps, and matrix effects. The structure of the...

  15. In Situ XPS Chemical Analysis of MnSiO3 Copper Diffusion Barrier Layer Formation and Simultaneous Fabrication of Metal Oxide Semiconductor Electrical Test MOS Structures.

    Science.gov (United States)

    Byrne, Conor; Brennan, Barry; McCoy, Anthony P; Bogan, Justin; Brady, Anita; Hughes, Greg

    2016-02-01

    Copper/SiO2/Si metal-oxide-semiconductor (MOS) devices both with and without a MnSiO3 barrier layer at the Cu/SiO2 interface have been fabricated in an ultrahigh vacuum X-ray photoelectron spectroscopy (XPS) system, which allows interface chemical characterization of the barrier formation process to be directly correlated with electrical testing of barrier layer effectiveness. Capacitance voltage (CV) analysis, before and after tube furnace anneals of the fabricated MOS structures showed that the presence of the MnSiO3 barrier layer significantly improved electric stability of the device structures. Evidence of improved adhesion of the deposited copper layer to the MnSiO3 surface compared to the clean SiO2 surface was apparent both from tape tests and while probing the samples during electrical testing. Secondary ion mass spectroscopy (SIMS) depth profiling measurements of the MOS test structures reveal distinct differences of copper diffusion into the SiO2 dielectric layers following the thermal anneal depending on the presence of the MnSiO3 barrier layer. PMID:26732185

  16. Chemical analyses of soil samples collected from the Sandia National Laboratories/NM, Tonopah Test Range environs, 1994-2005.

    Energy Technology Data Exchange (ETDEWEB)

    Deola, Regina Anne; Oldewage, Hans D.; Herrera, Heidi M.; Miller, Mark Laverne

    2006-05-01

    From 1994 through 2005, the Environmental Management Department of Sandia National Laboratories (SNL) at the Tonopah Test Range (TTR), NV, has collected soil samples at numerous locations on-site, on the perimeter, and off-site for the purpose of determining potential impacts to the environs from operations at TTR. These samples were submitted to an analytical laboratory of metal-in-soil analyses. Intercomparisons of these results were then made to determine if there was any statistical difference between on-site, perimeter, and off-site samples, or if there were increasing or decreasing trends which indicated that further investigation may be warranted. This work provided the SNL Environmental Management Department with a sound baseline data reference against which to compare future operational impacts. In addition, it demonstrates the commitment that the Laboratories have to go beyond mere compliance to achieve excellence in its operations. This data is presented in graphical format with narrative commentaries on particular items of interest.

  17. Ten-year chemical evolution of leachate and municipal solid waste incineration bottom ash used in a test road site.

    Science.gov (United States)

    Dabo, David; Badreddine, Rabia; De Windt, Laurent; Drouadaine, Ivan

    2009-12-30

    The use of municipal solid waste incineration (MSWI) bottom ash for road and car-park construction is an appropriate solution to reduce their disposal and the consumption of natural materials. In addition to leaching tests, the environmental impact assessment of such a waste recycling scenario critically needs for reliable long-term field data. This paper addresses a 10-year pilot site where MSWI bottom ashes have been used as road aggregates in Northern France (oceanic temperate climate). The paper focuses on the long-term evolution of leachate chemistry and the mineralogical transformations of MSWI bottom ash over 10 years. Data interpretation is supported by geochemical modeling in terms of main pH-buffering processes. The leachate pH and concentrations in major elements (Ca, Na and Cl) as well as in Al and heavy metals (Cu, Pb and Zn) quickly drop during the first 2 years to asymptotically reach a set of minimum values over 10 years; similar to those of a reference road built with natural calcareous aggregates. SO(4) release makes exception with a slightly increasing trend over time. Carbonation induced by CO(2) inputs, which leads to the successive dissolution of portlandite, CSH and ettringite, is one of the main phenomenon responsible for the geochemical evolution of leachate. On the other hand, mineralogical observations and batch tests demonstrate a relative stability of the MSWI bottom ash inside the subbase layer. In particular, carbonation may be far to be completed and still in progress after 10 years. This is consistent with preferential rainwater flow and dilution at the road edges combined to diffusion inside the subbase layer. PMID:19733006

  18. Combination of physico-chemical analysis, Allium cepa test system and Oreochromis niloticus erythrocyte based comet assay/nuclear abnormalities tests for cyto-genotoxicity assessments of treated effluents discharged from textile industries.

    Science.gov (United States)

    Hemachandra, Chamini K; Pathiratne, Asoka

    2016-09-01

    Bioassays for cyto-genotoxicity assessments are generally not required in current textile industry effluent discharge management regulations. The present study applied in vivo plant and fish based toxicity tests viz. Allium cepa test system and Oreochromis niloticus erythrocyte based comet assay and nuclear abnormalities tests in combination with physico-chemical analysis for assessing potential cytotoxic/genotoxic impacts of treated textile industry effluents reaching a major river (Kelani River) in Sri Lanka. Of the treated effluents tested from two textile industries, color in the Textile industry 1 effluents occasionally and color, biochemical oxygen demand and chemical oxygen demand in the Textile industry 2 effluents frequently exceeded the specified Sri Lankan tolerance limits for discharge of industrial effluents into inland surface waters. Exposure of A. cepa bulbs to 100% and 12.5% treated effluents from both industries resulted in statistically significant root growth retardation, mito-depression, and induction of chromosomal abnormalities in root meristematic cells in comparison to the dilution water in all cases demonstrating cyto-genotoxicity associated with the treated effluents. Exposure of O. niloticus to the 100% and 12.5% effluents, resulted in erythrocytic genetic damage as shown by elevated total comet scores and induction of nuclear abnormalities confirming the genotoxicity of the treated effluents even with 1:8 dilution. The results provide strong scientific evidence for the crucial necessity of incorporating cyto-genotoxicity impact assessment tools in textile industry effluent management regulations considering human health and ecological health of the receiving water course under chronic exposure. PMID:27209118

  19. Pilot study testing a European human biomonitoring framework for biomarkers of chemical exposure in children and their mothers

    DEFF Research Database (Denmark)

    Exley, Karen; Aerts, Dominique; Biot, Pierre;

    2015-01-01

    tested the biomonitoring guidelines and protocols developed by COPHES. The results from the pilot study in the UK are presented; 21 school children aged 6-11 years old and their mothers provided hair samples to measure mercury and urine samples, to measure cadmium, cotinine and several phthalate...... metabolites: mono(2-ethyl-5-hydroxyhexyl)phthalate (5OH-MEHP), mono(2-ethyl-5-oxo-hexyl)phthalate (5oxo-MEHP) and mono(2-ethylhexyl)phthalate (MEHP), mono-ethyl phthalate (MEP), mono-iso-butyl phthalate (MiBP), mono-benzyl phthalate (MBzP) and mono-n-butyl phthalate (MnBP). Questionnaire data was collected on...... environment, health and lifestyle. Mercury in hair was higher in children who reported frequent consumption of fish (geometric mean 0.35 μg/g) compared to those that ate fish less frequently (0.13 μg/g, p = 0.002). Cadmium accumulates with age as demonstrated by higher levels of urinary cadmium in the mothers...

  20. Chemical stabilization of metals in mine wastes by transformed red mud and other iron compounds: laboratory tests.

    Science.gov (United States)

    Ardau, C; Lattanzi, P; Peretti, R; Zucca, A

    2014-01-01

    A series of static and kinetic laboratory-scale tests were designed in order to evaluate the efficacy of transformed red mud (TRM) from bauxite refining residues, commercial zero-valent iron, and synthetic iron (III) hydroxides as sorbents/reagents to minimize the generation of acid drainage and the release of toxic elements from multi-contaminant-laden mine wastes. In particular, in some column experiments the percolation of meteoric water through a waste pile, alternated with periods of dryness, was simulated. Wastes were placed in columns together with sorbents/reagents in three different set-ups: as blended amendment (mixing method), as a bed at the bottom of the column (filtration method), or as a combination of the two previous methods. The filtration methods, which simulate the creation of a permeable reactive barrier downstream of a waste pile, are the most effective, while the use of sorbents/reagents as amendments leads to unsatisfactory results, because of the selective removal of only some contaminants. The efficacy of the filtration method is not significantly affected by the periods of dryness, except for a temporary rise of metal contents in the leachates due to dissolution of soluble salts formed upon evaporation in the dry periods. These results offer original information on advantages/limits in the use of TRM for the treatment of multi-contaminant-laden mine wastes, and represent the starting point for experimentation at larger scale. PMID:25244134

  1. The Effect and Benefit of Rice Chilo suppressalis Walker Chemical Control Test of Chlorantrani-liprole etc.

    Institute of Scientific and Technical Information of China (English)

    Changjia PENG; Pan DING; Tikun BAI; Libin FENG; Huaizhong YIN; Wanqiu WANG; Zhongyu FU

    2015-01-01

    In this paper, the first generation and second generation of Chilo sup-pressalis Walker were conducted as the test objects to investigate control of a new pesticide (chlorantraniliprole) with preparation of chlorantraniliprole 20% SC, abamectin 1.8% EC and chlorpyrifos 40% EC to Chilo suppressalis Walker. The re-sults showed that chlorantraniliprole 20% SC, abamectin 1.8% EC and chlorpyrifos 40% EC had effective control to Chilo suppressalis Walker for its excel ent control efficacy and long persistence period. Seedling protection efficacies were between 84.2%-100%, 90.1% and 92.1%, and insecticidal efficacies were between 84.6%-100%, 90.7% and 93.8% 36 days after application of chlorantraniliprole 20% SC in treat-ments with abamectin 1.8% EC and chlorpyrifos 40% EC for first generation Chilo suppressalis Walker control. The dead panicles were between 0.2%-1.4%, 0.8%and 0.7%, pest plant rate control in 0.4%-2.2%, 1.1% and 0.9%, and the rates of damaged rice plants were between 82.4%-97.6%, 90.2%-91.2% and 91.4%-92.8%, 30 days after application of chlorantraniliprole 20% SC, abamectin 1.8% EC and chlorpyrifos 40% EC for the second generation Chilo suppressalis Walker control. It can effectively protect seedlings, protect spike, increase grain number and grain weight, which promoting the increase production income effect. The real estate in-creased by 9.7%-12.3%, 10.9% and 11.2% than water treatment (CK) with a very significant level, while the incomes were higher than 1 719.19-1 998.22, 1 956.52 and 2 057.83 yuan.

  2. Metallography and fuel cladding chemical interaction in fast flux test facility irradiated metallic U-10Zr MFF-3 and MFF-5 fuel pins

    Science.gov (United States)

    Carmack, W. J.; Chichester, H. M.; Porter, D. L.; Wootan, D. W.

    2016-05-01

    The Mechanistic Fuel Failure (MFF) series of metal fuel irradiations conducted in the Fast Flux Test Facility (FFTF) provides an important comparison between data generated in the Experimental Breeder Reactor (EBR-II) and that expected in a larger-scale fast reactor. The MFF fuel operated with a peak cladding temperature at the top of the fuel column, but developed peak burnup at the centerline of the core. This places the peak fuel temperature midway between the core center and the top of fuel, lower in the fuel column than in EBR-II experiments. Data from the MFF-3 and MFF-5 assemblies are most comparable to the data obtained from the EBR-II X447 experiment. The two X447 pin breaches were strongly influenced by fuel/cladding chemical interaction (FCCI) at the top of the fuel column. Post irradiation examination data from MFF-3 and MFF-5 are presented and compared to historical EBR-II data.

  3. Standard test methods for chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade mixed oxides ((U, Pu)O2)

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade mixed oxides, (U, Pu)O2, powders and pellets to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Uranium in the Presence of Pu by Potentiometric Titration Plutonium by Controlled-Potential Coulometry Plutonium by Amperometric Titration with Iron (II) Nitrogen by Distillation Spectrophotometry Using Nessler Reagent 7 to 14 Carbon (Total) by Direct Combustion-Thermal Conductivity 15 to 26 Total Chlorine and Fluorine by Pyrohydrolysis 27 to 34 Sulfur by Distillation-Spectrophotometry 35 to 43 Moisture by the Coulometric, Electrolytic Moisture Analyzer 44 to 51 Isotopic Composition by Mass Spectrometry Rare Earths by Copper Spark Spectroscopy 52 to 59 Trace Impurities by Carrier Distillation Spectroscopy 60 to 69 Impurities by Spark-Source Mass Spectrography 70 to 76 Total Gas in Reactor-Grade Mixed Dioxide P...

  4. Mineralogical and chemical characteristics of the bentonite in the A2 test parcel of the LOT field experiments at Aespoe HRL (Sweden))

    International Nuclear Information System (INIS)

    The Long Term Test of Buffer Material (LOT) project at the Aespoe Hard Rock Laboratory (Sweden)), is a series of medium-scale field experiments focused on validating models and hypotheses concerning long term processes in the bentonite buffer of a repository for high-level radioactive waste. The test parcels emplaced in crystalline bedrock consist of blocks of compacted MX80 bentonite embedding a Cu-tube equipped with a heater to simulate the heat generation from radionuclide decay. The A2 test parcel had been subjected to elevated temperature (up to 130 deg. C) and hydration by a Na-Ca-Cl type groundwater for almost 6. years when it was retrieved to be analysed. The analyses included determinations of chemical composition, cation exchange capacity (CEC), exchangeable cations and mineralogy. Both the bulk bentonite and dialysed, homo-ionic Na-clay (<2 μm and <0.2 μm fractions) were analysed when relevant. Sulphate was redistributed in the heated part of the buffer under the thermal and hydration gradients that prevailed during the test period. Anhydrite accumulated in the warmer parts, whereas gypsum was dissolved in the peripheral parts of the buffer where water was supplied. Carbonate dissolution increased with temperature in the warmest parts, whereas chloride behaved conservatively in all blocks. Cu was incorporated in the bentonite matrix at the surface of the Cu-tube indicating some corrosion, which may be explained by reactions in an early stage of the test when trapped oxygen existed in the system. Along with the dissolution/precipitation reactions the pore water composition changed, which resulted in replacement of exchangeable sodium by calcium and magnesium in the warmest zone. Also Mg in the clay (<2 μm and <0.2 μm fractions) displays a clear gradient with peak values at the heater. Because several of the alternative sinks for Mg were eliminated in the sample preparation prior to the chemical analysis (purified clay fractions, removal of carbonates

  5. Results of Water and Sediment Toxicity Tests and Chemical Analyses Conducted at the Central Shops Burning Rubble Pit Waste Unit, January 1999

    Energy Technology Data Exchange (ETDEWEB)

    Specht, W.L.

    1999-06-02

    The Central Shops Burning Rubble Pit Operable Unit consists of two inactive rubble pits (631-1G and 631-3G) that have been capped, and one active burning rubble pit (631-2G), where wooden pallets and other non-hazardous debris are periodically burned. The inactive rubble pits may have received hazardous materials, such as asbestos, batteries, and paint cans, as well as non-hazardous materials, such as ash, paper, and glass. In an effort to determine if long term surface water flows of potentially contaminated water from the 631-1G, 631-3G, and 631-2G areas have resulted in an accumulation of chemical constituents at toxic levels in the vicinity of the settling basin and wetlands area, chemical analyses for significant ecological preliminary constituents of concern (pCOCs) were performed on aqueous and sediment samples. In addition, aquatic and sediment toxicity tests were performed in accordance with U.S. EPA methods (U.S. EPA 1989, 1994). Based on the results of the chemical analyses, unfiltered water samples collected from a wetland and settling basins located adjacent to the CSBRP Operable Unit exceed Toxicity Reference Values (TRVs) for aluminum, barium, chromium, copper, iron, lead, and vanadium at one or more of the four locations that were sampled. The water contained very high concentrations of clay particles that were present as suspended solids. A substantial portion of the metals were present as filterable particulates, bound to the clay particles, and were therefore not biologically available. Based on dissolved metal concentrations, the wetland and settling basin exceeded TRVs for aluminum and barium. However, the background reference location also exceeded the TRV for barium, which suggests that this value may be too low, based on local geochemistry. The detection limits for both total and dissolved mercury were higher than the TRV, so it was not possible to determine if the TRV for mercury was exceeded. Dissolved metal levels of chromium, copper

  6. Using biological and physico-chemical test methods to assess the role of concrete mixture design in resistance to microbially induced corrosion

    Science.gov (United States)

    House, Mitchell Wayne

    Concrete is the most widely used material for construction of wastewater collection, storage, and treatment infrastructure. The chemical and physical characteristics of hydrated portland cement make it susceptible to degradation under highly acidic conditions. As a result, some concrete wastewater infrastructure may be susceptible to a multi-stage degradation process known as microbially induced corrosion, or MIC. MIC begins with the production of aqueous hydrogen sulfide (H2S(aq)) by anaerobic sulfate reducing bacteria present below the waterline. H2S(aq) partitions to the gas phase where it is oxidized to sulfuric acid by the aerobic sulfur oxidizing bacteria Thiobacillus that resides on concrete surfaces above the waterline. Sulfuric acid then attacks the cement paste portion of the concrete matrix through decalcification of calcium hydroxide and calcium silica hydrate coupled with the formation of expansive corrosion products. The attack proceeds inward resulting in reduced service life and potential failure of the concrete structure. There are several challenges associated with assessing a concrete's susceptibility to MIC. First, no standard laboratory tests exist to assess concrete resistance to MIC. Straightforward reproduction of MIC in the laboratory is complicated by the use of microorganisms and hydrogen sulfide gas. Physico-chemical tests simulating MIC by immersing concrete specimens in sulfuric acid offer a convenient alternative, but do not accurately capture the damage mechanisms associated with biological corrosion. Comparison of results between research studies is difficult due to discrepancies that can arise in experimental methods even if current ASTM standards are followed. This thesis presents two experimental methods to evaluate concrete resistance to MIC: one biological and one physico-chemical. Efforts are made to address the critical aspects of each testing method currently absent in the literature. The first method presented is a new test

  7. Chemical flashlamps

    International Nuclear Information System (INIS)

    The authors have characterized the optical output and Nd:glass pumping performance of large-scale (120-cm-long, 1.2-cm-inner-diam), metal-oxidizer chemical flashlamps supplied to us by G.T.E. Sylvania. The experimental results were obtained on the same test bed that was used to study xenon electrical flashlamps, as described in Dependence of Flashlamp Performance on Gas Fill and Bore Size, earlier in this section. The peak Nd inversion levels produced by the chemical lamps were less than or equal to 10% of those generated by a xenon lamp of similar size and energy loading. The Peak Nd levels are in good agreement with predictions for the pumping rates in Nd:glass by a blackbody at the color temperatures of 30000 to 50000C, which they have measured during the burn of the pyrotechnic lamp

  8. Chemical Emergencies

    Science.gov (United States)

    When a hazardous chemical has been released, it may harm people's health. Chemical releases can be unintentional, as in the case of an ... the case of a terrorist attack with a chemical weapon. Some hazardous chemicals have been developed by ...

  9. The EpiOcular Eye Irritation Test (EIT) for hazard identification and labelling of eye irritating chemicals: protocol optimisation for solid materials and the results after extended shipment.

    Science.gov (United States)

    Kaluzhny, Yulia; Kandárová, Helena; Handa, Yuki; DeLuca, Jane; Truong, Thoa; Hunter, Amy; Kearney, Paul; d'Argembeau-Thornton, Laurence; Klausner, Mitchell

    2015-05-01

    The 7th Amendment to the EU Cosmetics Directive and the EU REACH Regulation have reinforced the need for in vitro ocular test methods. Validated in vitro ocular toxicity tests that can predict the human response to chemicals, cosmetics and other consumer products are required for the safety assessment of materials that intentionally, or inadvertently, come into contact with the eye. The EpiOcular Eye Irritation Test (EIT), which uses the normal human cell-based EpiOcular™ tissue model, was developed to address this need. The EpiOcular-EIT is able to discriminate, with high sensitivity and accuracy, between ocular irritant/corrosive materials and those that require no labelling. Although the original EpiOcular-EIT protocol was successfully pre-validated in an international, multicentre study sponsored by COLIPA (the predecessor to Cosmetics Europe), data from two larger studies (the EURL ECVAM-COLIPA validation study and an independent in-house validation at BASF SE) resulted in a sensitivity for the protocol for solids that was below the acceptance criteria set by the Validation Management Group (VMG) for eye irritation, and indicated the need for improvement of the assay's sensitivity for solids. By increasing the exposure time for solid materials from 90 minutes to 6 hours, the optimised EpiOcular-EIT protocol achieved 100% sensitivity, 68.4% specificity and 84.6% accuracy, thereby meeting all the acceptance criteria set by the VMG. In addition, to satisfy the needs of Japan and the Pacific region, the EpiOcular-EIT method was evaluated for its performance after extended shipment and storage of the tissues (4-5 days), and it was confirmed that the assay performs with similar levels of sensitivity, specificity and reproducibility in these circumstances. PMID:25995013

  10. 32P-Postlabeling test for covalent DNA binding of chemicals in vivo: Application to a variety of aromatic carcinogens and methylating agents

    International Nuclear Information System (INIS)

    Carcinogen--DNA adducts were detected and determined by 32P-postlabeling assay after exposure of mouse or rat tissues in vivo to a total of 28 compounds comprising 7 arylamines and derivatives, 3 azo compounds, 2 nitroaromatics, 12 polycyclic aromatic hydrocarbons, and 4 methylating agents. DNA was isolated from mouse skin, mouse liver, and rat liver after treatment with the individual carcinogens, then digested enzymatically to deoxyribonucleoside 3'-monophosphates, which were converted to 5'-32P-labeled deoxyribonucleoside 3',5'-bisphosphates by T4 polynucleotide kinase-catalyzed [32P]phosphate transfer from [gamma-32P]ATP. The nucleotides were resolved by anion-exchange t.l.c. on polyethyleneimine-cellulose and detected by autoradiography. The determination of low levels of DNA binding of the aromatic carcinogens entailed the removal of normal nucleotides prior to the resolution of adduct nucleotides. For this purpose, an alternative procedure employing reversed-phase t.l.c. was devised which offered advantages for the detection of quantitatively minor adducts. The procedures described enabled the detection of 1 aromatic DNA adduct in approximately 10(8) normal nucleotides, while the limit of detection of methylated adducts was 1 adduct in approximately 6 X 10(5) nucleotides. The results show that a great number of carcinogen-DNA adducts of diverse structure are substrates for 32P-labeling by polynucleotide kinase-catalyzed phosphorylation. Because covalent DNA adduct formation in vivo appears to be an essential property of the majority of chemical carcinogens, 32P-postlabeling analysis of carcinogen--DNA adducts in mammalian tissues may serve as a test for the screening of chemicals for potential carcinogenicity

  11. A STATISTICAL REVIEW OF THE CHEMICAL COMPOSITION MEASUREMENTS AND PCT RESULTS FOR THE GLASSES FABRICATED AS PART OF THE US TEST MATRIX

    International Nuclear Information System (INIS)

    The Savannah River National Laboratory (SRNL) is part of a consortium that is looking to improve the retention of aluminum, chromium, and sulfate in high level radioactive waste (HLW) glass. Such glass has been produced by the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) in South Carolina since it began operating in 1996 and is planned to be produced by the River Protection Project-Waste Treatment Plant (WTP) at the Hanford Site in Washington. The consortium conducting this study, which is designated as Task No.6 by the Department of Energy (DOE) Environmental Management (EM) program sponsoring this effort, is made up of personnel from SRNL, the Pacific Northwest National Laboratory (PNNL), and the V.G. Khlopin Radium Institute (KRI). Coordinated glass experimental work will be performed by each member of the consortium. The glasses that are being studied were selected to further the understanding of composition-property relationships within the glass regions of interest to both DWPF and WTP. Forty-five (45) glasses, making up the US test matrix, were batched and fabricated to support the study. The chemical compositions of these glasses were measured by SRNL's Process Science Analytical Laboratory (PSAL) under the auspices of an analytical plan. In addition, two heat treatments (quenched and centerline canister cooled, ccc) of each glass were subjected to the 7-day Product Consistency Test (PCT) to assess their durabilities. More specifically, the Method A of the PCT (ASTM C-1285-2002) was used for these tests. Measurements of the resulting leachate solutions were conducted by PSAL under the auspices of three analytical plans. A statistical review of the PSAL measurements of the chemical compositions and of the PCT results for the glasses making up the US test matrix is provided in this memorandum. Target, measured, and measured bias-corrected compositional views were determined for these glasses. The durability results for the US

  12. Standard test methods for chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade aluminum oxide and aluminum oxide-boron carbide composite pellets

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1994-01-01

    1.1 These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade aluminum oxide and aluminum oxide-boron carbide composite pellets to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Boron by Titrimetry 7 to 13 Separation of Boron for Mass Spectrometry 14 to 19 Isotopic Composition by Mass Spectrometry 20 to 23 Separation of Halides by Pyrohydrolysis 24 to 27 Fluoride by Ion-Selective Electrode 28 to 30 Chloride, Bromide, and Iodide by Amperometric Microtitrimetry 31 to 33 Trace Elements by Emission Spectroscopy 34 to 46 1.3 The values stated in SI units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (F...

  13. Prediction of rodent carcinogenicity using the DEREK system for 30 chemicals currently being tested by the National Toxicology Program. The DEREK Collaborative Group.

    OpenAIRE

    Marchant, C A

    1996-01-01

    DEREK is a knowledge-based expert system for the qualitative prediction of toxicity. The DEREK system has been used to predict the carcinogenicity in rodents of the 30 chemicals in the second National Toxicology Program (NTP) carcinogenicity prediction exercise. Seven of the chemicals were predicted to be carcinogens. For 23 chemicals, there was no evidence in the DEREK knowledge base to suggest carcinogenic activity. Supplementary data from a variety of sources have been evaluated by human e...

  14. Testing and validation of numerical models of groundwater flow, solute transport and chemical reactions in fractured granites: A quantitative study of the hydrogeological and hydrochemical impact produced

    International Nuclear Information System (INIS)

    This work deals with numerical modeling of groundwater flow, solute transport and chemical reactions through fractured media. These models have been developed within the framework of research activities founded by ENRESA , the Spanish Company for Nuclear Waste Management. This project is the result of a collaborative agreement between ENRESA and his equivalent Swedish Company (SKB) through the research project Task Force 5 of the Aspo Underground Laboratory. One of the objectives of this project is to assess quantitatively th hydrogeological and hydrochemical impact produced by the construction of a Deep Geological Repository in fractured granites. This is important because the new conditions altered construction impact will constitute the initial conditions for the repository closure stage. A second goo l of this work deals with testing the ability of current numerical tools to cope simultaneously with the complex hydrogeological and hydrochemical settlings, which are expected to take place in actual nuclear waste underground repositories constructed in crystalline fractured bed racks. This study has been undertaken through the performance of numerical models, which have subsequently been applied to simulate the hydrogeological and hydrochemical behavior of a granite massif, at a kilo metrical scale, during construction of the Aspo Hard Rock Underground Laboratory (Sweden). The Aspo Hard Rock Laboratory is a prototype, full-scale underground facility launched and operated by SKB. The main aim of the laboratory is to provide an opportunity for research, development and demonstration in a realistic rock environment down to the depth planned for the future deep repository. The framework of this underground facility provides a unique opportunity to attempt the objectives of the present dissertation. (Author)

  15. Development testing of the chemical analysis automation polychlorinated biphenyl standard analysis method during surface soils sampling at the David Witherspoon 1630 site

    International Nuclear Information System (INIS)

    The Chemical Analysis Automation (CAA) project is developing standardized, software-driven, site-deployable robotic laboratory systems with the objective of lowering the per-sample analysis cost, decreasing sample turnaround time, and minimizing human exposure to hazardous and radioactive materials associated with DOE remediation projects. The first integrated system developed by the CAA project is designed to determine polychlorinated biphenyls (PCB) content in soil matrices. A demonstration and development testing of this system was conducted in conjuction with surface soil characterization activities at the David Witherspoon 1630 Site in Knoxville, Tennessee. The PCB system consists of five hardware standard laboratory modules (SLMs), one software SLM, the task sequence controller (TSC), and the human-computer interface (HCI). Four of the hardware SLMs included a four-channel Soxhlet extractor, a high-volume concentrator, a column cleanup, and a gas chromatograph. These SLMs performed the sample preparation and measurement steps within the total analysis protocol. The fifth hardware module was a robot that transports samples between the SLMs and the required consumable supplies to the SLMs. The software SLM is an automated data interpretation module that receives raw data from the gas chromatograph SLM and analyzes the data to yield the analyte information. The TSC is a software system that provides the scheduling, management of system resources, and the coordination of all SLM activities. The HCI is a graphical user interface that presents the automated laboratory to the analyst in terms of the analytical procedures and methods. Human control of the automated laboratory is accomplished via the HCI. Sample information required for processing by the automated laboratory is entered through the HCI. Information related to the sample and the system status is presented to the analyst via graphical icons

  16. Testing and validation of numerical models of groundwater flow, solute transport and chemical reactions in fractured granites: A quantitative study of the hydrogeological and hydrochemical impact produced

    Energy Technology Data Exchange (ETDEWEB)

    Molinero Huguet, J.

    2001-07-01

    This work deals with numerical modeling of groundwater flow, solute transport and chemical reactions through fractured media. These models have been developed within the framework of research activities founded by ENRESA , the Spanish Company for Nuclear Waste Management. This project is the result of a collaborative agreement between ENRESA and his equivalent Swedish Company (SKB) through the research project Task Force 5 of the Aspo Underground Laboratory. One of the objectives of this project is to assess quantitatively th hydrogeological and hydrochemical impact produced by the construction of a Deep Geological Repository in fractured granites. This is important because the new conditions altered construction impact will constitute the initial conditions for the repository closure stage. A second goo l of this work deals with testing the ability of current numerical tools to cope simultaneously with the complex hydrogeological and hydrochemical settlings, which are expected to take place in actual nuclear waste underground repositories constructed in crystalline fractured bed racks. This study has been undertaken through the performance of numerical models, which have subsequently been applied to simulate the hydrogeological and hydrochemical behavior of a granite massif, at a kilo metrical scale, during construction of the Aspo Hard Rock Underground Laboratory (Sweden). The Aspo Hard Rock Laboratory is a prototype, full-scale underground facility launched and operated by SKB. The main aim of the laboratory is to provide an opportunity for research, development and demonstration in a realistic rock environment down to the depth planned for the future deep repository. The framework of this underground facility provides a unique opportunity to attempt the objectives of the present dissertation. (Author)

  17. Application of a NAPL partitioning interwell tracer test (PITT) to support DNAPL remediation at the Sandia National Laboratories/New Mexico chemical waste landfill

    International Nuclear Information System (INIS)

    Chlorinated solvents as dense non-aqueous phase liquid (DNAPL) are present at a large number of hazardous waste sites across the U.S. and world. DNAPL is difficult to detect in the subsurface, much less characterize to any degree of accuracy. Without proper site characterization, remedial decisions are often difficult to make and technically effective, cost-efficient remediations are even more difficult to obtain. A new non-aqueous phase liquid (NAPL) characterization technology that is superior to conventional technologies has been developed and applied at full-scale. This technology, referred to as the Partitioning Interwell Tracer Test (PITT), has been adopted from oil-field practices and tailored to environmental application in the vadose and saturated zones. A PITT has been applied for the first time at full-scale to characterize DNAPL in the vadose zone. The PITT was applied in December 1995 beneath two side-by-side organic disposal pits at Sandia National Laboratories/New Mexico (SNL/NM) RCRA Interim Status Chemical Waste Landfill (CWL), located in Albuquerque, New Mexico. DNAPL, consisting of a mixture of chlorinated solvents, aromatic hydrocarbons, and PCE oils, is known to exist in at least one of the two buried pits. The vadose zone PITT was conducted by injecting a slug of non-partitioning and NAPL-partitioning tracers into and through a zone of interest under a controlled forced gradient. The forced gradient was created by a balanced extraction of soil gas at a location 55 feet from the injector. The extracted gas stream was sampled over time to define tracer break-through curves. Soil gas sampling ports from multilevel monitoring installations were sampled to define break-through curves at specific locations and depths. Analytical instrumentation such as gas chromatographs and a photoacoustical analyzers operated autonomously, were used for tracer detection

  18. A review of the status of alternative approaches to animal testing and the development of integrated testing strategies for assessing the toxicity of chemicals under REACH--a summary of a DEFRA-funded project conducted by Liverpool John Moores University and FRAME.

    Science.gov (United States)

    Grindon, Christina; Combes, Robert; Cronin, Mark T D; Roberts, David W; Garrod, John

    2006-03-01

    Liverpool John Moores University and FRAME were recently awarded a DEFRA tender to conduct a review of the status of alternative approaches to animal testing, and to recommend further research with regard to the forthcoming European Union REACH (Registration, Evaluation and Authorisation of Chemicals) system for the safety testing and risk assessment of chemicals. The outcome of the project is summarised, including the prospects for in vitro and in silico testing, areas where reduction and refinement could be applied, and how decision-tree integrated testing strategies could be used to reduce the number of animals needed to fulfil the testing requirements of the REACH system. This paper is a prelude to a series of individual papers on detailed suggestions for applying non-animal methods to each of the major toxicity endpoints in REACH. PMID:16555968

  19. Quality Control of Physical and Chemical Tests on Petrochemical Construction Site%石油化工施工现场理化检验的质量控制

    Institute of Scientific and Technical Information of China (English)

    安祯钰; 岳雷

    2016-01-01

    With the development of national technology and economy,more and more thick wall products were produced,which could bear high temperature and high pressure such as heavy vessels and hydrogenation reactors.Stricter requirements were put forward to keep good quality of the products.Physical and chemical tests of large vessels should be carried out on construction site.Due to the simple facilities and changeable environment of the construction site,the quality control of physical and chemical tests was especially important.Only when each factor of physical and chemical tests on site was accurately controlled,the accurate data of physical and chemical tests on site could be obtained and accurate testing reports could be issued.%随着国家的科技进步和经济发展,大型容器、加氢反应器等厚壁高温高压产品逐渐增多,质量要求也更加严格,一些大型容器需要在施工现场进行理化检验。由于施工现场设施简陋,环境因素变化无常,理化检验的质量控制就显得尤为重要。只有正确地掌控现场理化检验的各个因素,才能得到精确的现场理化检验数据,出具准确的检测报告。

  20. Chemical use

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This is a summary of research and activities related to chemical use on Neal Smith National Wildlife Refuge between 1992 and 2009. The chemicals used on the Refuge...

  1. THE MURINE LOCAL LYMPH NODE ASSAY: AN ALTERNATIVE TEST METHOD FOR THE EVALUATION OF THE POTENTIAL FOR CHEMICALS TO ELICIT ALLERGIC CONTACT DERMATITIS

    Science.gov (United States)

    ABSTRACTThe process that a new toxicology test method must undergo to attain acceptance and regulatory implementation may seem daunting. As the first test method to undergo Interagency Coordinating Committee on the Validation of Alternative Methods (ICCVAM) review, the local...

  2. Chemical sensor

    Science.gov (United States)

    Rauh, R. David (Inventor)

    1990-01-01

    A sensor for detecting a chemical substance includes an insertion element having a structure which enables insertion of the chemical substance with a resulting change in the bulk electrical characteristics of the insertion element under conditions sufficient to permit effective insertion; the change in the bulk electrical characteristics of the insertion element is detected as an indication of the presence of the chemical substance.

  3. Comparison of the Limulus amoebocyte lysate test with plate counts and chemical analyses for assessment of the quality of lean fish.

    OpenAIRE

    Sullivan, J. D.; Ellis, P C; Lee, R. G.; Combs, W S; Watson, S. W.

    1983-01-01

    The quality of lean fish was assessed simply and rapidly with Limulus amoebocyte lysate. The endotoxin levels agreed with aerobic plate counts and chemical indices of spoilage. Correlation between level of endotoxin and level of total volatile bases was found to be highly significant (r = 0.8579; P less than 0.001).

  4. Laboratory Evaluation of In Situ Chemical Oxidation for Groundwater Remediation, Test Area North, Operable Unit 1-07B, Idaho National Engineering and Environmental Laboratory, Volume Three - Appendix F

    Energy Technology Data Exchange (ETDEWEB)

    Cline, S.R.; Denton, D.L.; Giaquinto, J.M.; McCracken, M.K.; Starr, R.C.

    1999-04-01

    This appendix supports the results and discussion of the laboratory work performed to evaluate the feasibility of in situ chemical oxidation for Idaho National Environmental and Engineering Laboratory's (INEEL) Test Area North (TAN) which is contained in ORNL/TM-13711/V1. This volume contains Appendix F. Appendix F is essentially a photocopy of the ORNL researchers' laboratory notebooks from the Environmental Sciences Division (ESD) and the Radioactive Materials Analytical Laboratory (RMAL).

  5. KARAKTERISTIK FISIK, KOMPOSISI KIMIA DAN UJI ORGANOLEPTIK TELUR AYAM MERAWANG DENGAN PEMBERIAN PAKAN BERSUPLEMEN OMEGA-3 [Physical Characteristic, Chemical Composition and Organoleptic Test of Merawang Chicken Egg Fed with Omega-3 Supplementation Diet

    OpenAIRE

    Iman Rahayu HS

    2003-01-01

    Chicken egg is a good quality animal protein source. The quality of the egg can be improved with spesific feeding, such as omega-3 supplemented diet. Merawang chicken is one of local Indonesian chicken domesticated at Bangka Island, South Sumatera, and popular as a layer bird. The aim of this research was to study the effect of omega-3 supplementation on the physical characteristic, chemical composition and organoleptic test of Merawang chicken eggs. One hundred and thirty six eggs (73 eggs w...

  6. 有关食品卫生理化检验分析中强化质量方法探讨%Food Hygiene Quality in Physical and Chemical Test Methods

    Institute of Scientific and Technical Information of China (English)

    王洪莹; 徐皓

    2015-01-01

    对于食品卫生理化检验分析来说,质量的控制是非常重要的,所以应该重视对于中强化质量的方法的进行研究,该文中提出了三种强化食品卫生理化检验分析质量的方法,分别是基础质量控制和仪器设备方面、做好分析和检验过程中的质量控制方面以及加强人才培养建设,希望能更好地为我国的食品卫生理化检验分析工作提供帮助。%For the food hygiene and physical testing and chemical analysis, is very important for quality control, so we should pay attention to the research on strengthening the quality method, this paper puts forward three kinds of method to strengthen food hy-giene quality of physical testing and chemical analysis, respectively, based on quality control and equipment to do the quality con-trol analysis and in the inspection process, strengthen the construction of talent cultivation, hoping to better physical testing and chemical analysis to help China's food hygiene.

  7. Chemical machining

    Directory of Open Access Journals (Sweden)

    A. Yardimeden

    2007-08-01

    Full Text Available Purpose: Nontraditional machining processes are widely used to manufacture geometrically complex and precision parts for aerospace, electronics and automotive industries. There are different geometrically designed parts, such as deep internal cavities, miniaturized microelectronics and fine quality components may only be produced by nontraditional machining processes. This paper is aiming to give details of chemical machining process, industrial applications, applied chemical etchants and machined materials. Advantages and disadvantages of the chemical machining are mentioned.Design/methodology/approach: In this study, chemical machining process was described its importance as nontraditional machining process. The steps of process were discussed in detail. The tolerances of machined parts were examined.Findings: Paper describes the chemical machining process, industrial applications, applied chemical etchants and machined materials.Practical implications: The machining operation should be carried out carefully to produce a desired geometry. Environmental laws have important effects when chemical machining is used.Originality/value: The importance of nontraditional machining processes is very high.

  8. Chemical Leukoderma.

    Science.gov (United States)

    Bonamonte, Domenico; Vestita, Michelangelo; Romita, Paolo; Filoni, Angela; Foti, Caterina; Angelini, Gianni

    2016-01-01

    Chemical leukoderma, often clinically mimicking idiopathic vitiligo and other congenital and acquired hypopigmentation, is an acquired form of cutaneous pigment loss caused by exposure to a variety of chemicals that act through selective melanocytotoxicity. Most of these chemicals are phenols and aromatic or aliphatic catechols derivatives. These chemicals, however, are harmful for melanocytes in individuals with an individual susceptibility. Nowadays, chemical leukoderma is fairly common, caused by common domestic products. The presence of numerous acquired confetti- or pea-sized macules is clinically characteristic of chemical leukoderma, albeit not diagnostic. Other relevant diagnostic elements are a history of repeated exposure to a known or suspected depigmenting agent at the sites of onset and a macules distribution corresponding to sites of chemical exposure. Spontaneous repigmentation has been reported when the causative agent is avoided; the repigmentation process is perifollicular and gradual, taking place for a variable period of weeks to months. PMID:27172302

  9. Profiling of drugs and environmental chemicals for functional impairment of neural crest migration in a novel stem cell-based test battery

    OpenAIRE

    Zimmer, Bastian; Pallocca, Giorgia; Dreser, Nadine; Foerster, Sunniva; Waldmann, Tanja; Westerhout, Joost; Julien, Sylvie; Krause, Karl-Heinz; van Thriel, Christoph; Hengstler, Jan G.; Sachinidis, Agapios; Bosgra, Sieto; Leist, Marcel

    2014-01-01

    Developmental toxicity in vitro assays have hitherto been established as stand-alone systems, based on a limited number of toxicants. Within the embryonic stem cell-based novel alternative tests project, we developed a test battery framework that allows inclusion of any developmental toxicity assay and that explores the responses of such test systems to a wide range of drug-like compounds. We selected 28 compounds, including several biologics (e.g., erythropoietin), classical pharmaceuticals ...

  10. Development of root-symbiosis systems for testing environmental chemicals in their effects in soils; Entwicklung eines Wurzelsymbiosesystems zum Testen von Umweltchemikalien auf ihre Wirkung in Boeden

    Energy Technology Data Exchange (ETDEWEB)

    Werner, D. [Marburg Univ. (Germany). Abt. Angewandte Botanik; Wetzel, A. [Marburg Univ. (Germany). Abt. Angewandte Botanik; Goerge, E. [Marburg Univ. (Germany). Abt. Angewandte Botanik; Brandt, S. [Marburg Univ. (Germany). Abt. Angewandte Botanik; Klante, G. [Marburg Univ. (Germany). Abt. Angewandte Botanik

    1992-03-31

    Root symbiosis of legumes with symbiotic bacteria of the genus Rhizobium and with symbiotic fungi (vesicular-arbuscular mycorrhiza) have been established as sensitive bioindicators for soil environmental chemicals. For different plant species also different transfer rates for those substances have been found. Towards heavy metals (cadmium, lead, arsenite) the symbioses react very differentiated. As environmental chemicals chinoline, fluoranthene, phenanthrene und anthracene have been studied. (orig.) [Deutsch] Die Wurzelsymbiosen von Leguminosen mit symbiotischen Bakterien (Rhizobium) und symbiotischen Pilzen (vesikulaer-arbuskulaere Mycorrhiza) wurden als empfindliche Bioindikatoren gegenueber bodenbelastenden Altstoffen nachgewiesen. Fuer verschiedene Kulturpflanzen wurden unterschiedliche Transferraten aus dem Boden in die Pflanzenmatrix nachgewiesen. Gegenueber Schwermetallen (Cadmium, Blei, Arsenit) reagieren die Symbiosen sehr unterschiedlich. Als Altstoffe wurden modellhaft Chinolin, Fluoranthen, Phenanthren und Anthrazen verwendet. (orig.)

  11. The chemical composition of donors in AM CVn stars and ultra-compact X-ray binaries: observational tests of their formation

    OpenAIRE

    Nelemans, G.A.; Yungelson, L. R.; Van Der Sluys, M. V.; Tout, C. A.

    2009-01-01

    We study the formation of ultra-compact binaries (AM CVn stars and ultra-compact X-ray binaries) with emphasis on the surface chemical abundances of the donors in these systems. Hydrogen is not convincingly detected in the spectra of these systems. Three different proposed formation scenarios involve different donor stars, white dwarfs, helium stars or evolved main-sequence stars. Using detailed evolutionary calculations we show that the abundances of helium WD donors and evolved main-sequenc...

  12. Effect of irradiation and chemical composition on deformation and fracture of steel of OH16N15 type during long-term test

    International Nuclear Information System (INIS)

    Thermal and radiation creep, as well as long-term strength of an austenitic stainless steel were investigated as a function of sulphur content and niobium addition. Interrelation between the grain boundary sleep and the intergranular fracture, and an important role of the surface in the nucleation and propagation of crack were revealed by quantitative structural and fractographic studies. Irradiation and chemical composition were found to influence these processes

  13. Profiling of drugs and environmental chemicals for functional impairment of neural crest migration in a novel stem cell-based test battery

    NARCIS (Netherlands)

    Zimmer, B.; Pallocca, G.; Dreser, N.; Foerster, S.; Waldmann, T.; Westerhout, J.; Julien, S.; Krause, K.H.; Van Thriel, C.; Hengstler, J.G.; Sachinidis, A.; Bosgra, S.; Leist, M.

    2014-01-01

    Developmental toxicity in vitro assays have hitherto been established as stand-alone systems, based on a limited number of toxicants. Within the embryonic stem cell-based novel alternative tests project, we developed a test battery framework that allows inclusion of any developmental toxicity assay

  14. A Two-Tiered-Testing Decision Tree for Assays in the USEPA-EDSP Screening Battery: Using 15 years of experience to improve screening and testing for endocrine active chemicals.@@

    Science.gov (United States)

    In 1996 the Food Quality Protection and Safe Drinking Water Acts instructed the USEPA to determine “…whether the pesticide chemical may have an effect in humans that is similar to an effect produced by a naturally occurring estrogen or other endocrine effects;"*...

  15. Chemical networks*

    OpenAIRE

    Thi Wing-Fai

    2015-01-01

    This chapter discusses the fundamental ideas of how chemical networks are build, their strengths and limitations. The chemical reactions that occur in disks combine the cold phase reactions used to model cold molecular clouds with the hot chemistry applied to planetary atmosphere models. With a general understanding of the different types of reactions that can occur, one can proceed in building a network of chemical reactions and use it to explain the abundance of species seen in disks. One o...

  16. Xenobiotic metabolism capacities of human skin in comparison with a 3D-epidermis model and keratinocyte-based cell culture as in vitro alternatives for chemical testing: phase II enzymes.

    Science.gov (United States)

    Götz, Christine; Pfeiffer, Roland; Tigges, Julia; Ruwiedel, Karsten; Hübenthal, Ulrike; Merk, Hans F; Krutmann, Jean; Edwards, Robert J; Abel, Josef; Pease, Camilla; Goebel, Carsten; Hewitt, Nicola; Fritsche, Ellen

    2012-05-01

    The 7th Amendment to the EU Cosmetics Directive prohibits the use of animals in cosmetic testing for certain endpoints, such as genotoxicity. Therefore, skin in vitro models have to replace chemical testing in vivo. However, the metabolic competence neither of human skin nor of alternative in vitro models has so far been fully characterized, although skin is the first-pass organ for accidentally or purposely (cosmetics and pharmaceuticals) applied chemicals. Thus, there is an urgent need to understand the xenobiotic-metabolizing capacities of human skin and to compare these activities to models developed to replace animal testing. We have measured the activity of the phase II enzymes glutathione S-transferase, UDP-glucuronosyltransferase and N-acetyltransferase in ex vivo human skin, the 3D epidermal model EpiDerm 200 (EPI-200), immortalized keratinocyte-based cell lines (HaCaT and NCTC 2544) and primary normal human epidermal keratinocytes. We show that all three phase II enzymes are present and highly active in skin as compared to phase I. Human skin, therefore, represents a more detoxifying than activating organ. This work systematically compares the activities of three important phase II enzymes in four different in vitro models directly to human skin. We conclude from our studies that 3D epidermal models, like the EPI-200 employed here, are superior over monolayer cultures in mimicking human skin xenobiotic metabolism and thus better suited for dermatotoxicity testing. PMID:22509834

  17. Study of shear wave attenuation field variations in Central Asia region using records of nuclear and chemical explosions at the Semipalatinsk Test Site

    International Nuclear Information System (INIS)

    The temporal variations of amplitude ratio of Lg and Pg, Lg and P waves were studied using the 1964-2000 records of more than 200 underground nuclear and chemical calibration explosions obtained at the Northern Tien Shan TLG station, KURK station (Eastern Kazakhstan), BRVK (Kokchetav Massif), GRM (Southern Tien Shan) located at epicentral distances of 77-1400 km. Variations in this parameter with time are shown to be significantly different for different paths. The spatial-temporal variations of the seismic wave attenuation field are presumably associated with the ascent of juvenile fluids through large deep faults. (author)

  18. Chemical Safety Assessment Using Read-Across: Assessing the Use of Novel Testing Methods to Strengthen the Evidence Base for Decision Making

    OpenAIRE

    BERGGREN ELISABET; Amcoff, Patric; Benigni, Romualdo; Blackburn, Karen; Carney, Edward; Cronin, Mark; DELUYKER Hubert; Gautier, Francoise; JUDSON Richard; KASS George; KELLER Detleff; KNIGHT Derek; LILIENBLUM Werner; Mahony, Catherine; Rusyn, Ivan

    2014-01-01

    Background Safety assessment for repeated dose toxicity is one of the largest challenges in the process to replace animal testing. This is also one of the proof of concept ambitions of SEURAT-1, the largest ever European Union research initiative on alternative testing, co-funded by the European Commission and Cosmetics Europe. This review is based on the discussion and outcome of a workshop organized on initiative of the SEURAT-1 consortium joined by a group of international experts with com...

  19. Chemical machining

    OpenAIRE

    A. Yardimeden; T. Ozben; O. Cakir

    2007-01-01

    Purpose: Nontraditional machining processes are widely used to manufacture geometrically complex and precision parts for aerospace, electronics and automotive industries. There are different geometrically designed parts, such as deep internal cavities, miniaturized microelectronics and fine quality components may only be produced by nontraditional machining processes. This paper is aiming to give details of chemical machining process, industrial applications, applied chemical etchants and mac...

  20. Chemical Radioprotectors

    Directory of Open Access Journals (Sweden)

    S. N. Upadhyay

    2005-10-01

    Full Text Available Protection of biological systems against radiation damage is of paramount importance during accidental and unavoidable exposure to radiation. Several physico-chemical and biological factors collectively contribute to the damage caused by radiation and are, therefore, targets for developing radioprotectors. Work on the development of chemicals capable of protecting biological systemsfrom radiation damage was initiated nearly six decades ago with cysteine being the first molecule to be reported. Chemicals capable of scavenging free radicals, inducing oxygen depletion,antioxidants and modulators of immune response have been some of the radioprotectors extensively investigated with limited success. Mechanism of action of some chemical radioprotectors and their combinations have been elucidated, while further understanding is required in many instances. The present review elaborates on structure-activity relationship of some of the chemical radioprotectors, their evaluation, and assessment, limitation, and future prospects.

  1. Prilliminary test of chemical components for Hedyotis uncinella HooK. et Arn in Guizhou%贵州苗药对坐叶的化学成分预试分析

    Institute of Scientific and Technical Information of China (English)

    干正洋

    2012-01-01

    The paper studies the chemical constituents of Hedyotis uncinella HooK. et Am in Guizhou through preliminary test from petroleum ether, 95% ethanol and purified water. The chemical constituents of Hedyotis uncinella HooK. et Arn was primarily demonstrated by precipitation reaction or color reaction with various indicator. Results: Hedyotis uncinella HooK. et Am may contain chemical constituents such as steroid, tfiterpenoids, volatile oil, fat, flavone, cardiacglycoside, coumarin, lactone, sugar, polysaccharide, saponin, tannin, organic acid. The results of priliminary test provide evidence for further study of the chemical compositions and biological activities of Hedyotis uncinella HooK. et Am.%首次对贵州苗药对坐叶的石油醚、95%乙醇、水提取物进行预试分析研究,通过多种指示剂和显色荆的显色反应或沉淀反应,初步推断对坐叶中可能含有的化学成分。结果显示:对坐叶中可能含甾体、三萜、挥发油、油脂、黄酮、酚、强心苷、香豆素、内酯、糖、多糖、皂苷、糅质、有机酸等化学成分。此试验为进一步研究对坐叶的生物活性成分奠定了基础。

  2. Potential long-term chemical effects of diesel fuel emissions on a mining environment: A preliminary assessment based on data from a deep subsurface tunnel at Rainer Mesa, Nevada test site

    International Nuclear Information System (INIS)

    The general purpose of the Yucca Mountain Site Characterization Project (YMSCP) Introduced Materials Task is to understand and predict potential long-term modifications of natural water chemistry related to the construction and operation of a radioactive waste repository that may significantly affect performance of the waste packages. The present study focuses on diesel exhaust. Although chemical information on diesel exhaust exists in the literature, it is either not explicit or incomplete, and none of it establishes mechanisms that might be used to predict long-term behavior. In addition, the data regarding microbially mediated chemical reactions are not well correlated with the abiotic chemical data. To obtain some of the required long-term information, we chose a historical analog: the U12n tunnel at Rainier Mesa, Nevada Test Site. This choice was based on the tunnel's extended (30-year) history of diesel usage, its geological similarity to Yucca Mountain, and its availability. The sample site within the tunnel was chosen based on visual inspection and on information gathered from miners who were present during tunnel operations. The thick layer of dark deposit at that site was assumed to consist primarily of rock powder and diesel exhaust. Surface samples and core samples were collected with an intent to analyze the deposit and to measure potential migration of chemical components into the rock. X-ray diffraction (XRD), x-ray fluorescence (XRF), scanning electron microscopy (SEM) with energy dispersive spectra (EDS) analysis, secondary-ion mass spectrometry (SIMS), and Fourier transform infrared (FTIR) analysis were used to measure both spatial distribution and concentration for the wide variety of chemical components that were expected based on our literature survey

  3. Potential long-term chemical effects of diesel fuel emissions on a mining environment: A preliminary assessment based on data from a deep subsurface tunnel at Rainer Mesa, Nevada test site

    Energy Technology Data Exchange (ETDEWEB)

    Meike, A.; Bourcier, W.L.; Alai, M. [and others

    1995-09-01

    The general purpose of the Yucca Mountain Site Characterization Project (YMSCP) Introduced Materials Task is to understand and predict potential long-term modifications of natural water chemistry related to the construction and operation of a radioactive waste repository that may significantly affect performance of the waste packages. The present study focuses on diesel exhaust. Although chemical information on diesel exhaust exists in the literature, it is either not explicit or incomplete, and none of it establishes mechanisms that might be used to predict long-term behavior. In addition, the data regarding microbially mediated chemical reactions are not well correlated with the abiotic chemical data. To obtain some of the required long-term information, we chose a historical analog: the U12n tunnel at Rainier Mesa, Nevada Test Site. This choice was based on the tunnel`s extended (30-year) history of diesel usage, its geological similarity to Yucca Mountain, and its availability. The sample site within the tunnel was chosen based on visual inspection and on information gathered from miners who were present during tunnel operations. The thick layer of dark deposit at that site was assumed to consist primarily of rock powder and diesel exhaust. Surface samples and core samples were collected with an intent to analyze the deposit and to measure potential migration of chemical components into the rock. X-ray diffraction (XRD), x-ray fluorescence (XRF), scanning electron microscopy (SEM) with energy dispersive spectra (EDS) analysis, secondary-ion mass spectrometry (SIMS), and Fourier transform infrared (FTIR) analysis were used to measure both spatial distribution and concentration for the wide variety of chemical components that were expected based on our literature survey.

  4. Testing the effects of opacity and the chemical mixture on the excitation of pulsations in B stars of the Magellanic Clouds

    Science.gov (United States)

    Salmon, S.; Montalbán, J.; Morel, T.; Miglio, A.; Dupret, M.-A.; Noels, A.

    2012-06-01

    The B-type pulsators known as β Cephei and slowly pulsating B (SPB) stars present pulsations driven by the κ mechanism, which operates thanks to an opacity bump due to the iron-group elements. In low-metallicity environments such as the Magellanic Clouds, β Cep and SPB pulsations are not expected. Nevertheless, recent observations show evidence for the presence of B-type pulsator candidates in both galaxies. We seek an explanation for the excitation of β Cep and SPB modes in those galaxies by examining basic input physics in stellar modelling: (i) the specific metal mixture of B-type stars in the Magellanic Clouds and (ii) the role of a potential underestimation of stellar opacities. We first derive the present-day chemical mixtures of B-type stars in the Magellanic Clouds. Then, we compute stellar models for that metal mixture and perform a non-adiabatic analysis of these models. In the second approach, we simulate parametric enhancements of stellar opacities due to different iron-group elements. We then study their effects in models of B stars and their stability. We find that adopting a representative chemical mixture of B stars in the Small Magellanic Cloud cannot explain the presence of B-type pulsators there. An increase of the opacity in the region of the iron-group bump could drive B-type pulsations, but only if this increase occurs at the temperature corresponding to the maximum contribution of Ni to this opacity bump. We recommend an accurate computation of the Ni opacity to understand B-type pulsators in the Small Magellanic Cloud, as well as the frequency domain observed in some Galactic hybrid β Cep-SPB stars.

  5. Applicability of lectin histochemistry in a test system with in ovo treatment for detecting androgenic and antiandrogenic effects of chemicals in Japanese quail (Coturnix japonica).

    Science.gov (United States)

    Utsumi, T; Yoshimura, Y

    2011-01-01

    The aim of the current study was to examine whether analysis of the appearance of specific lectin-positive substances in the quail embryonic cloacal gland would be useful for evaluating the androgenic and antiandrogenic effects of chemicals. Fertilized Japanese quail eggs were injected with 0 to 75 µg of cyproterone acetate (CA), an antiandrogenic compound, on d 12 of incubation (d 12), followed by injection of 0 to 300 µg of testosterone propionate (TP) on d 13. Experimental groups consisted of a control group (corn oil injections on d 12 and 13), a TP-L group [corn oil and a low dose (L; 30 µg) of TP], a TP-H group [corn oil and a high dose (H; 300 µg) of TP], a CA-L + TP-H group [a low dose (L;7.5 µg) of CA + TP-H], and a CA-H + TP-H group [a high dose (H; 75 µg) of CA + TP-H]. The cloacal tissues were collected on d 16, processed into paraffin sections, and stained using 14 different biotinylated lectins. The Vicia villosa (VVA) lectin most strongly stained the developing cloacal glandular cells in TP-H. Western blotting analysis showed 1 VVA-positive band of approximately 75 kDa. The ratio of VVA-positive areas per unit square examined microscopically by image analysis was significantly greater in the TP-H group than in the control group in both males and females. The ratio was significantly decreased in the CA-L + TP-H and CA-H + TP-H groups compared with the TP-H group in both males and females. Furthermore, the ratio was smaller in females than in males within a TP-L or TP-H treatment group. These results suggest that lectin histochemistry on quail embryonic cloaca using VVA is useful for evaluating the androgenic and antiandrogenic effects of chemical compounds. PMID:21177456

  6. Hazardous Chemicals

    Centers for Disease Control (CDC) Podcasts

    2007-04-10

    Chemicals are a part of our daily lives, providing many products and modern conveniences. With more than three decades of experience, The Centers for Disease Control and Prevention (CDC) has been in the forefront of efforts to protect and assess people's exposure to environmental and hazardous chemicals. This report provides information about hazardous chemicals and useful tips on how to protect you and your family from harmful exposure.  Created: 4/10/2007 by CDC National Center for Environmental Health.   Date Released: 4/13/2007.

  7. Laboratory Evaluation of In Situ Chemical Oxidation for Groundwater Remediation, Test Area North, Operable Unit 1-07B, Idaho National Engineering and Environmental Laboratory, Volume Four - Appendix G

    Energy Technology Data Exchange (ETDEWEB)

    Cline, S.R.; Denton, D.L.; Giaquinto, J.M.; McCracken, M.K.; Starr, R.C.

    1999-04-01

    This appendix supports the results and discussion of the laboratory work performed to evaluate the feasibility of in situ chemical oxidation for Idaho National Environmental and Engineering Laboratory's (INEEL) Test Area North (TAN) which is contained in ORNL/TM-13711/V1. This volume contains Appendix G. Appendix G is a presentation of VOC chromatography data collected during the study. Information on the calibration curves and calibration checks used as well as the sample GC reports themselves are included here. The concentration values presented on the GC reports are calculation using the data from the applicable calibration curve and any necessary dilutions which were made.

  8. Assessing variability in chemical acute toxicity of unionid mussels: Influence of intra- and inter-laboratory testing, life stage, and species - SETAC Abstract

    Science.gov (United States)

    We developed a toxicity database for unionid mussels to examine the extent of intra- and inter-laboratory variability in acute toxicity tests with mussel larvae (glochidia) and juveniles; the extent of differential sensitivity of the two life stages; and the variation in sensitiv...

  9. Assessing variability in chemical acute toxicity of unionid mussels: Influence of intra- and inter-laboratory testing, life stage, and species

    Science.gov (United States)

    The authors developed a toxicity database for unionid mussels to examine the extent of intra- and interlaboratory variability in acute toxicity tests with mussel larvae (glochidia) and juveniles; the extent of differential sensitivity of the 2 life stages; and the variation in se...

  10. Concrete decontamination scoping tests

    International Nuclear Information System (INIS)

    This report details the research efforts and scoping tests performed at the Idaho Chemical Process Plant using scabbling, chemical, and electro-osmotic decontamination techniques on radiologically contaminated concrete

  11. Chemical Peels

    Science.gov (United States)

    ... pills, who subsequently become pregnant or have a history of brownish facial discoloration. Scarring Reactivation of cold sores What can I expect after having a chemical peel? All peels require some follow-up care: ...

  12. Unnecessary Chemicals

    Science.gov (United States)

    Johnson, Anita

    1978-01-01

    Discusses the health hazards resulting from chemical additions of many common products such as cough syrups, food dyes, and cosmetics. Steps being taken to protect consumers from these health hazards are included. (MDR)

  13. Chemical kinetics

    International Nuclear Information System (INIS)

    This book gives descriptions of chemical kinetics. It starts summary of chemical kinetics and reaction mechanism, and explains basic velocity law, experiment method for determination of reaction velocity, temperature dependence of reaction velocity, theory of reaction velocity, theory on reaction of unimolecular, process of atom and free radical, reaction in solution, catalysis, photochemical reaction, such as experiment and photochemical law and rapid reaction like flame, beam of molecule and shock tube.

  14. Spectro-directional Chris/Proba data over two Swiss test sites for Improved estimation of biophysical and - chemical variables - five years of activities

    OpenAIRE

    Kneubühler, M.; Koetz, B.; Huber, S.; Zimmerman, N.E.; Schaepman, M. E.

    2008-01-01

    The spaceborne ESA-mission CHRIS (Compact High Resolution Imaging Spectrometer) on-board PROBA-1 (Project for On-board Autonomy) delivers multi-directional data sets that contain spectral, directional, spatial and multi-temporal information. CHRIS/PROBA data have been acquired over two well documented test sites in Switzerland (Swiss National Park (SNP) and Vordemwald (VOR) since 2003 and allow for the monitoring of complex and dynamic vegetation canopies of forests and agricultural crops...

  15. Testing the effects of opacity and the chemical mixture on the excitation of pulsations in B stars of the Magellanic Clouds

    CERN Document Server

    Salmon, S; Morel, T; Miglio, A; Dupret, M-A; Noels, A

    2012-01-01

    The B-type pulsators known as \\beta Cephei and Slowly Pulsating B (SPB) stars present pulsations driven by the \\kappa mechanism, which operates thanks to an opacity bump due to the iron group elements. In low-metallicity environments such as the Magellanic Clouds, \\beta Cep and SPB pulsations are not expected. Nevertheless, recent observations show evidence for the presence of B-type pulsator candidates in both galaxies. We seek an explanation for the excitation of \\beta Cep and SPB modes in those galaxies by examining basic input physics in stellar modelling: i) the specific metal mixture of B-type stars in the Magellanic Clouds; ii) the role of a potential underestimation of stellar opacities. We first derive the present-day chemical mixtures of B-type stars in the Magellanic Clouds. Then, we compute stellar models for that metal mixture and perform a non-adiabatic analysis of these models. In a second approach, we simulate parametric enhancements of stellar opacities due to different iron group elements. W...

  16. Preparation and characterization of Pd/Al2O3 and Pd nanoparticles as standardized test material for chemical and biochemical studies of traffic related emissions.

    Science.gov (United States)

    Leopold, K; Maier, M; Schuster, M

    2008-05-01

    Palladium model particles similar to those emitted from catalytic car exhaust converters were prepared and characterized with the intention of providing a standardized material for investigations of the chemical behavior and bioavailability of traffic related Pd emissions. Two series of Pd particles were prepared and characterized in detail: Pd nanoparticles (2-4 nm) dispersed on aluminum oxide particles of a diameter range between 0.1 to 30 microm and "Pd-only" nanoparticles of 5-10 nm in diameter. The Pd/alpha-Al2O3 particles are very similar to particles emitted from catalytic converters by mechanical abrasion. The Pd-only particles are useful e.g. for exposure studies in which the presence of aluminum could lead to interferences when studying biological and biochemical effects. The sample preparation procedure of both series was optimized in order to achieve elemental particles with proper sizes and a narrow size distribution. The obtained particles were characterized by transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selective area diffraction (SAD), laser granulometry and graphite furnace atomic absorption spectrometry (GFAAS) for the measurement of Pd concentrations. PMID:18279916

  17. Risks and Chemical Substances.

    Science.gov (United States)

    Blumberg, Avrom A.

    1994-01-01

    Examines exposure to chemicals within the home and three important ways in which hazardous substances can be identified and evaluated. Suggests a rational picture of human health risks and contains an introductory discussion of reasons for exposure, epidemiology, cancer causes and patterns, animal testing, toxins, and risk. (LZ)

  18. Comparison of acute toxicity of process chemicals used in the oil refinery industry, tested with the diatom Chaetoceros gracilis, the flagellate Isochrysis galbana, and the zebra fish, Brachydanio rerio

    International Nuclear Information System (INIS)

    Chemicals under the trade names Nalco 537-DA, Nalco 625, Nalco 7607, Nalco 5165, Ivamin, and technical monoethanolamine are used extensively in the oil refinery industry. Aquatic toxicity tests were conducted using zebra fish fry (Brachydanio rerio) and the unicellular algae Isochrysis galbana (a flagellate) and Chaetoceros gracilis (a diatom). Inhibition of cell division, chlorophyll content, and 14CO2 uptake in the algae were sensitive end points. The effective concentrations (EC50s) of growth inhibition were 0.1 mg/L (Ivamin; I. galbana), 0.8 mg/L (Nalco 7607; I. galbana), 6 mg/L (Nalco 625; I. galbana), 10 mg/L (Nalco 5165; C. gracilis), and 15 mg/L (Nalco 537-DA; C. gracilis). The lethal concentrations (LC50s) (96 h) toward zebra fish fry was 1 mg/L for Nalco 7607, 6.5 mg/L for Nalco 537-DA, 7.1 mg/L for Nalco 625, and 20 mg/L for Ivamin 803. Monoethanolamine had an LC50 higher than 5,000 mg/L. Nalco 5165 was not tested on fish fry. The heartbeat frequency of fish embryos was reduced by 2.5 mg/L Nalco 537-DA, but this was an insensitive end point for the other chemicals

  19. Test Study on the Qualitative Identification of Chemical Components of Tinospora sinensis(Lour.)Merr.%宽筋藤化学成分定性鉴别的试验研究

    Institute of Scientific and Technical Information of China (English)

    吴凤荣; 曾聪彦; 胡玉良

    2015-01-01

    目的:考察岭南特色药材宽筋藤所含的化学成分。方法采用试管试验法,对宽筋藤的水、95%乙醇、石油醚提取物进行系统化学实验研究,通过多种显色剂和指示剂的颜色反应或沉淀反应,初步推断宽筋藤中可能含有的化学成分。结果经过系统溶剂预试验研究,提示宽筋藤中可能含有氨基酸、鞣质、有机酸、多糖、香豆素、醌类、强心苷、生物碱、甾体类等化学成分。结论宽筋藤中含有多种生物活性成分,值得进深入研究和开发。%Objective To investigate the chemical components of Tinospora sinensis(Lour. )Merr. , the special herbal material in Lingnan region. Methods The tube test method was adopted for the systematic chemical laboratory research on Tinospora sinensis(Lour. )Merr. with water,95% ethyl alcohol and petrole-um ether extract separately. Through the color reaction or precipitation reaction with a variety of chromogenic agents and indicators,the potential chemical components of Tinospora sinensis(Lour. )Merr. were analyzed. Results After solvent preliminary test study,it was suggested that amino acides,tannins,organic acides,pol-ysaccharides,coumarin,quinones,cardiac glycosides,alkaloids and sterioids were probably contained. Con-clusion Tinospora sinensis(Lour. )Merr. contains many biological active components. A deeper study and exploration are required.

  20. 宽筋藤化学成分定性鉴别的试验研究%Test Study on the Qualitative Identification of Chemical Components of Tinospora sinensis(Lour.)Merr.

    Institute of Scientific and Technical Information of China (English)

    吴凤荣; 曾聪彦; 胡玉良

    2015-01-01

    目的:考察岭南特色药材宽筋藤所含的化学成分。方法采用试管试验法,对宽筋藤的水、95%乙醇、石油醚提取物进行系统化学实验研究,通过多种显色剂和指示剂的颜色反应或沉淀反应,初步推断宽筋藤中可能含有的化学成分。结果经过系统溶剂预试验研究,提示宽筋藤中可能含有氨基酸、鞣质、有机酸、多糖、香豆素、醌类、强心苷、生物碱、甾体类等化学成分。结论宽筋藤中含有多种生物活性成分,值得进深入研究和开发。%Objective To investigate the chemical components of Tinospora sinensis(Lour. )Merr. , the special herbal material in Lingnan region. Methods The tube test method was adopted for the systematic chemical laboratory research on Tinospora sinensis(Lour. )Merr. with water,95% ethyl alcohol and petrole-um ether extract separately. Through the color reaction or precipitation reaction with a variety of chromogenic agents and indicators,the potential chemical components of Tinospora sinensis(Lour. )Merr. were analyzed. Results After solvent preliminary test study,it was suggested that amino acides,tannins,organic acides,pol-ysaccharides,coumarin,quinones,cardiac glycosides,alkaloids and sterioids were probably contained. Con-clusion Tinospora sinensis(Lour. )Merr. contains many biological active components. A deeper study and exploration are required.

  1. Eye Irritation Test (EIT) for Hazard Identification of Eye Irritating Chemicals using Reconstructed Human Cornea-like Epithelial (RhCE) Tissue Model

    OpenAIRE

    Kaluzhny, Yulia; Kandárová, Helena; d’Argembeau-Thornton, Laurence; Kearney, Paul; Klausner, Mitchell

    2015-01-01

    To comply with the Seventh Amendment to the EU Cosmetics Directive and EU REACH legislation, validated non-animal alternative methods for reliable and accurate assessment of ocular toxicity in man are needed. To address this need, we have developed an eye irritation test (EIT) which utilizes a three dimensional reconstructed human cornea-like epithelial (RhCE) tissue model that is based on normal human cells. The EIT is able to separate ocular irritants and corrosives (GHS Categories 1 and 2 ...

  2. Pilot test of biological removal of 1,4-dioxane from a chemical factory wastewater by gel carrier entrapping Afipia sp. strain D1.

    Science.gov (United States)

    Isaka, Kazuichi; Udagawa, Makiko; Sei, Kazunari; Ike, Michihiko

    2016-03-01

    A pilot-scale (120 L) bioreactor system using a gel carrier-entrapped pure bacterial strain, Afipia sp. strain D1, capable of degrading 1,4-dioxane as a sole carbon and energy source was constructed and applied to treat real industrial wastewater containing 1,4-dioxane from a chemical factory. Although the wastewater not only contained high concentrations of 1,4-dioxane but also considerable amounts of other organic compounds (73 mg-TOCL(-1) on average), the bioreactor could efficiently remove 1,4-dioxane without significant inhibitory effects. The reactor startup could be completed within approximately 1 month by increasing the 1,4-dioxane loading rate (0.09-0.47 kg-dioxanem(-3)d(-1)) in a stepwise manner. Effective 1,4-dioxane removal was stably maintained for 3 months with an influent 1,4-dioxane of 570-730 mg L(-1), giving an average effluent concentration and removal rate of 3.4 mg L(-1) and 0.46 kg-dioxanem(-3)d(-1), respectively. A 1,4-dioxane loading fluctuation between 0.14 and 0.72 kg-dioxanem(-3)d(-1) did not significantly affect its removal, and more than 99% removal efficiency was constantly maintained. The Monod model could well describe the relationship between the effluent 1,4-dioxane concentration and 1,4-dioxane removal rates of the bioreactors, showing that the half-saturation constant (Ks) was 28 mg L(-1). PMID:26561749

  3. Chemical networks

    Science.gov (United States)

    Thi, Wing-Fai

    2015-09-01

    This chapter discusses the fundamental ideas of how chemical networks are build, their strengths and limitations. The chemical reactions that occur in disks combine the cold phase reactions used to model cold molecular clouds with the hot chemistry applied to planetary atmosphere models. With a general understanding of the different types of reactions that can occur, one can proceed in building a network of chemical reactions and use it to explain the abundance of species seen in disks. One on-going research subject is finding new paths to synthesize species either in the gas-phase or on grain surfaces. Specific formation routes for water or carbon monoxide are discussed in more details. 13th Lecture of the Summer School "Protoplanetary Disks: Theory and Modelling Meet Observations"

  4. TESTING THE ROLE OF SNe Ia FOR GALACTIC CHEMICAL EVOLUTION OF p-NUCLEI WITH TWO-DIMENSIONAL MODELS AND WITH s-PROCESS SEEDS AT DIFFERENT METALLICITIES

    International Nuclear Information System (INIS)

    The bulk of p isotopes is created in the ''gamma processes'' mainly by sequences of photodisintegrations and beta decays in explosive conditions in Type Ia supernovae (SNIa) or in core collapse supernovae (ccSN). The contribution of different stellar sources to the observed distribution of p-nuclei in the solar system is still under debate. We explore single degenerate Type Ia supernovae in the framework of two-dimensional SNIa delayed-detonation explosion models. Travaglio et al. discussed the sensitivity of p-nuclei production to different SNIa models, i.e., delayed detonations of different strength, deflagrations, and the dependence on selected s-process seed distributions. Here we present a detailed study of p-process nucleosynthesis occurring in SNIa with s-process seeds at different metallicities. Based on the delayed-detonation model DDT-a of TRV11, we analyze the dependence of p-nucleosynthesis on the s-seed distribution obtained from different strengths of the 13C pocket. We also demonstrate that 208Pb seed alone changes the p-nuclei production considerably. The heavy-s seeds (140 ≤A < 208) contribute with about 30%-40% to the total light-p nuclei production up to 132Ba (with the exception of 94Mo and 130Ba, to which the heavy-s seeds contribute with about 15% only). Using a Galactic chemical evolution code from Travaglio et al., we study the contribution of SNIa to the solar stable p-nuclei. We find that explosions of Chandrasekhar-mass single degenerate systems produce a large amount of p-nuclei in our Galaxy, both in the range of light (A ≤ 120) and heavy p-nuclei, at almost flat average production factors (within a factor of about three). We discussed in details p-isotopes such as 94Mo with a behavior diverging from the average, which we attribute to uncertainties in the nuclear data or in SNIa modeling. Li et al. find that about 70% of all SNeIa are normal events. If these are explained in the framework of explosions of

  5. CONTRIBUTION TO THE PHYTOCHEMICAL STUDY AND CHEMICAL TESTS OF THE EXTRACTS OF Citrus limonium (LEMON and Capsicum frutescens L. (CHILLI PEPPER

    Directory of Open Access Journals (Sweden)

    Laiza Cristina Carlos Freire

    2015-02-01

    Full Text Available Use of natural medicine has been used by man since time immemorial, and this use has grown considerably in recent times. Thus, this study aims to make a comparator analysis regarding the phytochemical test, antioxidant activity and total phenolic content of the extracts of the leaves in ethanol and their respective fractions of Citrus limonium (lemon and Capsicum frutescens L. (chilli pepper. To compare them was observed that ethanol extract of both plants showed the better antioxidant activity, Capsicum frutescens L. with 204.60 ppm and 99.07 ppm with Citrus limonium. With regard to the phenolic content of the hexane extract and lemon extract in ethanol pepper were those that showed a higher content. Overall, it was noted that Citrus limonium excelled both in relation to their antioxidant activity and the phenolic content.

  6. Chemical pressure

    OpenAIRE

    Hauser, Andreas; Amstutz, Nahid; Delahaye, Sandra; Sadki, Asmaâ; Schenker, Sabine; Sieber, Regula; Zerara, Mohamed

    2002-01-01

    The physical and photophysical properties of three classic transition metal complexes, namely [Fe(bpy)3]2+, [Ru(bpy)3]2+, and [Co(bpy)3]2+, can be tuned by doping them into a variety of inert crystalline host lattices. The underlying guest-host interactions are discussed in terms of a chemical pressure.

  7. Chemical Peels

    Science.gov (United States)

    ... resources Meet our partners Español Donate Diseases and treatments Acne and rosacea Bumps and growths Color problems Contagious skin diseases ... Chemical peels public SPOT Skin Cancer™ Diseases and treatments Acne and rosacea Bumps and growths Color problems Contagious skin diseases ...

  8. Chemical dispersants

    NARCIS (Netherlands)

    Rahsepar, Shokouhalsadat; Smit, Martijn P.J.; Murk, Albertinka J.; Rijnaarts, Huub H.M.; Langenhoff, Alette A.M.

    2016-01-01

    Chemical dispersants were used in response to the Deepwater Horizon oil spill in the Gulf of Mexico, both at the sea surface and the wellhead. Their effect on oil biodegradation is unclear, as studies showed both inhibition and enhancement. This study addresses the effect of Corexit on oil biodeg

  9. MEASURING DETAILED CHEMICAL ABUNDANCES FROM CO-ADDED MEDIUM-RESOLUTION SPECTRA. I. TESTS USING MILKY WAY DWARF SPHEROIDAL GALAXIES AND GLOBULAR CLUSTERS

    International Nuclear Information System (INIS)

    The ability to measure metallicities and α-element abundances in individual red giant branch (RGB) stars using medium-resolution spectra (R ≈ 6000) is a valuable tool for deciphering the nature of Milky Way dwarf satellites and the history of the Galactic halo. Extending such studies to more distant systems like Andromeda is beyond the ability of the current generation of telescopes, but by co-adding the spectra of similar stars, we can attain the necessary signal-to-noise ratio (S/N) to make detailed abundance measurements. In this paper, we present a method to determine metallicities and α-element abundances using the co-addition of medium-resolution spectra. We test the method of spectral co-addition using high-S/N spectra of more than 1300 RGB stars from Milky Way globular clusters and dwarf spheroidal galaxies obtained with the Keck II telescope/DEIMOS spectrograph. We group similar stars using photometric criteria and compare the weighted ensemble average abundances ([Fe/H], [Mg/Fe], [Si/Fe], [Ca/Fe], and [Ti/Fe]) of individual stars in each group with the measurements made on the corresponding co-added spectrum. We find a high level of agreement between the two methods, which permits us to apply this co-added spectra technique to more distant RGB stars, like stars in the M31 satellite galaxies. This paper outlines our spectral co-addition and abundance measurement methodology and describes the potential biases in making these measurements.

  10. Xenobiotic metabolism capacities of human skin in comparison with a 3D epidermis model and keratinocyte-based cell culture as in vitro alternatives for chemical testing: activating enzymes (Phase I).

    Science.gov (United States)

    Götz, Christine; Pfeiffer, Roland; Tigges, Julia; Blatz, Veronika; Jäckh, Christine; Freytag, Eva-Maria; Fabian, Eric; Landsiedel, Robert; Merk, Hans F; Krutmann, Jean; Edwards, Robert J; Pease, Camilla; Goebel, Carsten; Hewitt, Nicola; Fritsche, Ellen

    2012-05-01

    Skin is important for the absorption and metabolism of exposed chemicals such as cosmetics or pharmaceuticals. The Seventh Amendment to the EU Cosmetics Directive prohibits the use of animals for cosmetic testing for certain endpoints, such as genotoxicity; therefore, there is an urgent need to understand the xenobiotic metabolizing capacities of human skin and to compare these activities with reconstructed 3D skin models developed to replace animal testing. We have measured Phase I enzyme activities of cytochrome P450 (CYP) and cyclooxygenase (COX) in ex vivo human skin, the 3D skin model EpiDerm™ (EPI-200), immortalized keratinocyte-based cell lines and primary normal human epidermal keratinocytes. Our data demonstrate that basal CYP enzyme activities are very low in whole human skin and EPI-200 as well as keratinocytes. In addition, activities in monolayer cells differed from organotypic tissues after induction. COX activity was similar in skin, EPI-200 and NHEK cells, but was significantly lower in immortalized keratinocytes. Hence, the 3D model EPI-200 might represent a more suitable model for dermatotoxicological studies. Altogether, these data help to better understand skin metabolism and expand the knowledge of in vitro alternatives used for dermatotoxicity testing. PMID:22509833

  11. Laboratory Evaluation of In Situ Chemical Oxidation for Groundwater Remediation, Test Area North, Operable Unit 1-07B, Idaho National Engineering and Environmental Laboratory, Volume Two, Appendices C, D, and E

    Energy Technology Data Exchange (ETDEWEB)

    Cline, S.R.; Denton, D.L.; Giaquinto, J.M.; McCracken, M.K.; Starr, R.C.

    1999-04-01

    These appendices support the results and discussion of the laboratory work performed to evaluate the feasibility of in situ chemical oxidation for Idaho National Environmental and Engineering Laboratory's (INEEL) Test Area North (TAN) which is contained in ORNL/TM-1371 l/Vol. This volume contains Appendices C-E. Appendix C is a compilation of all recorded data and mathematical calculations made to interpret the data. For the Task 3 and Task 4 work, the spreadsheet column definitions are included immediately before the actual spreadsheet pages and are listed as ''Sample Calculations/Column Definitions'' in the table of contents. Appendix D includes the chronological order in which the experiments were conducted and the final project costs through October 1998. Appendix E is a compilation of the monthly progress reports submitted to INEEL during the course of the project.

  12. Laboratory Evaluation of In Situ Chemical Oxidation for Groundwater Remediation, Test Area North, Operable Unit 1-07B, Idaho National Engineering and Environmental Laboratory, Volume One - Main Text and Appendices A and B

    Energy Technology Data Exchange (ETDEWEB)

    Cline, S.R.; Denton, D.L.; Giaquinto, J.M.; McCracken, M.K.; Starr, R.C.

    1999-04-01

    The laboratory investigation was performed to evaluate the feasibility of utilizing in situ chemical oxidation for remediating the secondary source of groundwater contaminants at the Idaho National Engineering and Environmental Laboratory (INEEL) Test Area North (TAN) Site. The study involved trichloroethene (TCE) contaminated media (groundwater, soil, and sludge) from TAN. The effectiveness of the selected oxidant, potassium permanganate (KMn0(sub4)), was evaluated at multiple oxidant and contaminant concentrations. Experiments were performed to determine the oxidant demand of each medium and the rate of TCE oxidation. The experiments were performed under highly controlled conditions (gas-tight reactors, constant 12C temperature). Multiple parameter were monitored over time including MN0(sub 4) and TCE concentrations and pH.

  13. Urine specific gravity test

    Science.gov (United States)

    Urine specific gravity is a laboratory test that shows the concentration of all chemical particles in the urine. ... changes to will tell the provider the specific gravity of your urine. The dipstick test gives only ...

  14. Chemical inhomogeneities and pulsation

    OpenAIRE

    Turcotte, S.

    2001-01-01

    Major improvements in models of chemically peculiar stars have been achieved in the past few years. With these new models it has been possible to test quantitatively some of the processes involved in the formation of abundance anomalies and their effect on stellar structure. The models of metallic A (Am) stars have shown that a much deeper mixing has to be present to account for observed abundance anomalies. This has implications on their variability, which these models also reproduce qualita...

  15. Micromachined chemical jet dispenser

    Energy Technology Data Exchange (ETDEWEB)

    Swierkowski, S.; Ciarlo, D.

    1996-05-13

    Goal is to develop a multi-channel micromachined chemical fluid jet dispenser that is applicable to prototype tests with biological samples that demonstrate its utility for molecular biology experiments. Objective is to demonstrate a new device capable of ultrasonically ejecting droplets from 10-200 {mu}m diameter capillaries that are arranged in an array that is linear or focused. The device is based on several common fabrication procedures used in MEMS (micro electro mechanical systems) technology: piezoelectric actuators, silicon, etc.

  16. Chemical Carcinogenesis Research Information System (CCRIS)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The CCRIS database contains chemical records with carcinogenicity, mutagenicity, tumor promotion, and tumor inhibition test results. CCRIS provides historical...

  17. Chemical cosmology

    CERN Document Server

    Boeyens, Jan CA

    2010-01-01

    The composition of the most remote objects brought into view by the Hubble telescope can no longer be reconciled with the nucleogenesis of standard cosmology and the alternative explanation, in terms of the LAMBDA-Cold-Dark-Matter model, has no recognizable chemical basis. A more rational scheme, based on the chemistry and periodicity of atomic matter, opens up an exciting new interpretation of the cosmos in terms of projective geometry and general relativity. The response of atomic structure to environmental pressure predicts non-Doppler cosmical redshifts and equilibrium nucleogenesis by alp

  18. Chemical spectroscopy

    International Nuclear Information System (INIS)

    The purpose of chemical spectroscopy with neutrons is to utilize the dependence of neutron scattering cross-sections on isotope and on momentum transfer (which probes the spatial extent of the excitation) to understand fundamental and applied aspects of the dynamics of molecules and fluids. Chemical spectroscopy is divided into three energy ranges: vibrational spectroscopy, 25-500 MeV, for which much of the work is done on Be-filter analyzer instruments; low energy spectroscopy, less than 25 MeV; and high resolution spectroscopy, less than 1 MeV, which typically is performed on backscattering spectrometers. Representative examples of measurements of the Q-depenence of vibrational spectra, higher energy resolution as well as extension of the Q-range to lower values at high energy transfers, and provisions of higher sensitivities in vibrational spectroscopy are discussed. High resolution, high sensitivity, and polarization analysis studies in low energy spectroscopy are discussed. Applications of very high resolution spectroscopy are also discussed

  19. Chemical sputtering

    International Nuclear Information System (INIS)

    In this thesis, the author focuses on chemical sputtering by keV ions, treating two specific examples: the chemical effects occurring when bombarding simple condensed gases and the mechanisms of the ion-assisted etching process. First, however, the mechanism of sputtering of condensed gases in general is discussed. These mechanisms have been investigated using condensed noble gases as target material. The thesis is a compilation of articles published elsewhere. Contents: sputtering of condensed noble gases by keV heavy ions; surface distribution as an observable factor in the energy distribution of sputtered particles; reactive sputtering of simple condensed gases by keV heavy ion bombardment; mass spectra of nozzle-produced small molecular clusters of H2O, NH3, CO and CH4; mass and energy distribution of particles sputter-etched from Si in a XeF2 environment; argon-ion assisted etching of silicon by molecular chlorine; energy distribution of sputtered poly-atomic molecules. (Auth.)

  20. Chemical plume source localization.

    Science.gov (United States)

    Pang, Shuo; Farrell, Jay A

    2006-10-01

    This paper addresses the problem of estimating a likelihood map for the location of the source of a chemical plume using an autonomous vehicle as a sensor probe in a fluid flow. The fluid flow is assumed to have a high Reynolds number. Therefore, the dispersion of the chemical is dominated by turbulence, resulting in an intermittent chemical signal. The vehicle is capable of detecting above-threshold chemical concentration and sensing the fluid flow velocity at the vehicle location. This paper reviews instances of biological plume tracing and reviews previous strategies for a vehicle-based plume tracing. The main contribution is a new source-likelihood mapping approach based on Bayesian inference methods. Using this Bayesian methodology, the source-likelihood map is propagated through time and updated in response to both detection and nondetection events. Examples are included that use data from in-water testing to compare the mapping approach derived herein with the map derived using a previously existing technique. PMID:17036813

  1. Endocrine disrupting chemicals: harmful substances and how to test them Produtos químicos como desreguladores endócrinos: substâncias danosas e como devem ser testadas

    Directory of Open Access Journals (Sweden)

    Nicolás Olea-Serrano

    2002-04-01

    Full Text Available This paper presents an analysis of the opinions of different groups from: scientists, international regulatory bodies, non-governmental organizations and industry; with an interest in the problem of identifying chemical substances with endocrine disrupting activity. There is also discussion of the consequences that exposure to endocrine disruptors may have for human health, considering concrete issues related to: the estimation of risk; the tests that must be used to detect endocrine disruption; the difficulties to establish an association between dose, time of exposure, individual susceptibility, and effect; and the attempts to create a census of endocrine disruptors. Finally, it is proposed that not all hormonal mimics should be included under the single generic denomination of endocrine disruptors.Este artigo apresenta uma análise das opiniões de diferentes grupos, inclusive de cientistas, agências regulatórias internacionais, organizações não-governamentais e indústrias, interessados na questão da identificação de substâncias químicas com atividade desreguladora endócrina. Os autores discutem também o impacto da exposição aos desreguladores endócrinos sobre a saúde humana, considerando as seguintes questões: estimativa de risco; testes utilizados para detectar distúrbios endócrinos; dificuldades na identificação de uma associação entre dose, tempo de exposição, suscetibilidade individual e efeito e tentativas no sentido de mapear os desreguladores endócrinos. Finalmente, os autores argumentam que nem todos os agonistas hormonais devem ser incluídos sob a denominação genérica de desreguladores endócrinos.

  2. KARAKTERISTIK FISIK, KOMPOSISI KIMIA DAN UJI ORGANOLEPTIK TELUR AYAM MERAWANG DENGAN PEMBERIAN PAKAN BERSUPLEMEN OMEGA-3 [Physical Characteristic, Chemical Composition and Organoleptic Test of Merawang Chicken Egg Fed with Omega-3 Supplementation Diet

    Directory of Open Access Journals (Sweden)

    Iman Rahayu HS

    2003-12-01

    Full Text Available Chicken egg is a good quality animal protein source. The quality of the egg can be improved with spesific feeding, such as omega-3 supplemented diet. Merawang chicken is one of local Indonesian chicken domesticated at Bangka Island, South Sumatera, and popular as a layer bird. The aim of this research was to study the effect of omega-3 supplementation on the physical characteristic, chemical composition and organoleptic test of Merawang chicken eggs. One hundred and thirty six eggs (73 eggs were control and 63 eggs was omega-3 suplemented were collected from 64 Merawang chicken for eleven weeks. Feeding were arranged isonitrogenous (15.8% and isocaloric (2650 kkal/kg, and fed ad libitum. Omega-3 feeding was produced from fermentation of soybean waste (ampas tahu and mold (Rhizopus oligosporus, then mixed with sea fish oil waste (1:1, w/w. The result showed that no significant effect of the treatment on physical characteristic parameter. Omega-3 eggs significantly (P<0.05 increased the ratio of width and length of eggs. The score of yolk was increased in omega-3 eggs which indicated increase of omega-3 fatty acids and Æ’Ã’ caroten contents. The total lipid and cholesterol contents were lower (P<0.05 in omega-3 eggs, however, omega-3 fatty acids component (linolenat, EPA and DHA increased 10 and 6 times than control. Organoleptic test of colour, flavor, texture and taste of white portion, yolk portion and whole eggs were generally accepted by the panelis, both in the control and omega-3 eggs.

  3. CHEMICAL EVOLUTION

    Energy Technology Data Exchange (ETDEWEB)

    Calvin, Melvin

    1965-06-01

    How did life come to be on the surface of the earth? Darwin himself recognized that his basic idea of evolution by variation and natural selection must be a continuous process extending backward in time through that period in which the first living things arose and into the period of 'Chemical Evolution' which preceded it. We are approaching the examination of these events by two routes. One is to seek for evidence in the ancient rocks of the earth which were laid down prior to that time in which organisms capable of leaving their skeletons in the rocks to be fossilized were in existence. This period is sometime prior to approximately 600 million years ago. The earth is believed to have taken its present form approximately 4700 million years ago. We have found in rocks whose age is about 1000 million years certain organic molecules which are closely related to the green pigment of plants, chlorophyll. This seems to establish that green plants were already fluorishing prior to that time. We have now found in rocks of still greater age, namely, 2500 million years, the same kinds of molecules mentioned above which can be attributed to the presence of living organisms. If these molecules are as old as the rocks, we have thus shortened the time available for the generation of the complex biosynthetic sequences which give rise to these specific hydrocarbons (polyisoprenoids) to less than 2000 million years.

  4. Management of Instrument and Equipment in Physical and Chemical Analysis and Testing Laboratory%理化分析测试实验室仪器设备的管理

    Institute of Scientific and Technical Information of China (English)

    潘晓飞

    2014-01-01

    仪器设备是实验室的重要资产,仪器设备管理是实验室正常运行的重要组成部分。从仪器设备的管理架构以及仪器设备的采购、验收、量值溯源、维护维修、报废等方面讨论了理化分析测试实验室仪器设备管理工作的重点和注意事项。%Instrument and equipment are important asset in laboratory,and they are important part of the management of laboratory for daily operation. The important issue and notification of instrument and equipment management of physical and chemical analysis and testing laboratory were mainly discussed from the aspect of the instrument and equipment management structure and equipment procurement,acceptance,quantity traceability,maintenance repair and equipment rejection.

  5. Stratigraphy of the unsaturated zone and uppermost part of the Snake River Plain Aquifer at the Idaho Chemical Processing Plant and Test Reactors Area, Idaho National Engineering Laboratory, Idaho

    International Nuclear Information System (INIS)

    A complex sequence of basalt flows and sedimentary interbeds underlies the Idaho Chemical Processing Plant and Test Reactors Area at the Idaho National Engineering Laboratory in eastern Idaho. Wells drilled to a depth of 700 feet penetrate a sequence of 23 basalt-flow groups and 15 to 20 sedimentary interbeds that range in age from 200,000 to 640,000 years. The 23 flow groups consist of about 40 separate basalt flows and flow units. Each flow group is made up of one to three petrographically similar basalt flows that erupted from related source areas during periods of less than 200 years. Sedimentary interbeds consist of fluvial, lacustrine, and eolian deposits of clay, silt, sand, and gravel that accumulated during periods of volcanic inactivity ranging from thousands to hundreds of thousands of years. Multiple flow groups and sedimentary interbeds of similar age and source form seven composite stratigraphic units with distinct upper and lower contacts. Composite units older than 350,000 years were tilted, folded, and fractured by differential subsidence and uplift. Basalt and sediment of this sequence are unsaturated to a depth that ranges from 430 to 480 feet below land surface. Basalt and sediment in the lower part of the sequence are saturated and make up the uppermost part of the Snake River Plain aquifer. Stratigraphic relations in the lowermost part of the aquifer below a depth of 700 feet are uncertain. 23 refs., 22 figs., 1 tab

  6. Chemical durability of zircon

    Science.gov (United States)

    Trocellier, Patrick; Delmas, Robert

    2001-07-01

    Zircon (ZrSiO 4) exhibits a strong structural affinity for uranium and thorium together with a very high chemical durability. This makes it a potential crystalline host matrix to immobilize actinides issued from separation of nuclear wastes. Irradiation induces amorphization of the crystalline structure (the metamictization process) and thus may decrease the chemical durability of the material. Leaching tests have been conducted on natural zircons from Brazil and Madagascar at 96°C for a period of 1 month, using deionized water. Leachates have been analysed by inductively coupled plasma mass spectrometry (ICP-MS) and UV-visible spectrophotometry. Zircon solid surfaces have been investigated by coupling scanning electron microscopy and X-ray microanalysis (SEM-EDX) with nuclear microprobe analysis ( μPIXE, μRBS and μERDA). From the mass balance between leachates and hydrated surfaces, the probable mechanisms of zircon aqueous alteration are presented and discussed.

  7. Chemical durability of zircon

    International Nuclear Information System (INIS)

    Zircon (ZrSiO4) exhibits a strong structural affinity for uranium and thorium together with a very high chemical durability. This makes it a potential crystalline host matrix to immobilize actinides issued from separation of nuclear wastes. Irradiation induces amorphization of the crystalline structure (the metamictization process) and thus may decrease the chemical durability of the material. Leaching tests have been conducted on natural zircons from Brazil and Madagascar at 96 deg. C for a period of 1 month, using deionized water. Leachates have been analysed by inductively coupled plasma mass spectrometry (ICP-MS) and UV-visible spectrophotometry. Zircon solid surfaces have been investigated by coupling scanning electron microscopy and X-ray microanalysis (SEM-EDX) with nuclear microprobe analysis (μPIXE, μRBS and μERDA). From the mass balance between leachates and hydrated surfaces, the probable mechanisms of zircon aqueous alteration are presented and discussed

  8. DNA adducts-chemical addons

    OpenAIRE

    T. R. Rajalakshmi; N AravindhaBabu; Shanmugam, K. T.; Masthan, K. M. K.

    2015-01-01

    DNA adduct is a piece of DNA covalently bond to a chemical (safrole, benzopyrenediol epoxide, acetaldehyde). This process could be the start of a cancerous cell. When a chemical binds to DNA, it gets damaged resulting in abnormal replication. This could be the start of a mutation and without proper DNA repair, this can lead to cancer. It is this chemical that binds with the DNA is our prime area of concern. Instead of performing the whole body analysis for diagnosing cancer, this test could b...

  9. Cosmetics Europe compilation of historical serious eye damage/eye irritation in vivo data analysed by drivers of classification to support the selection of chemicals for development and evaluation of alternative methods/strategies: the Draize eye test Reference Database (DRD)

    OpenAIRE

    VIEGAS BARROSO JOAO FILIPE; PFANNENBECKER Uwe; Adriaens,Els; Alepee, Natalie; CLUZEL Magalie; De Smedt, Ann; HIBATALLAH Jalila; KLARIC Martina; Mewes, Karsten R.; MILLET Marion; TEMPLIER Marie; McNamee, Pauline

    2015-01-01

    A thorough understanding of which of the effects assessed in the in vivo Draize eye test are responsible for driving UN GHS/EU CLP classification is critical for an adequate selection of chemicals to be used in the development and/or evaluation of alternative methods/strategies and for properly assessing their predictive capacity and limitations. For this reason, Cosmetics Europe has compiled a database of Draize data (Draize eye test Reference Database, DRD) from external lists that were cre...

  10. 琼榄不同部位化学成分预试验及总黄酮含量测定%Preliminary Test of Chemical Components and Content Determination of Total Flavonoids in Different Parts of Gonocaryum lobbianum

    Institute of Scientific and Technical Information of China (English)

    孙玉婉; 汪春牛; 韩星; 刘平怀

    2013-01-01

    目的:研究南药琼榄根、茎、叶、果壳不同部位所含的化学成分,并测定琼榄各部位中总黄酮的含量.方法:采用系统预试验法对琼榄各部位的水、95%乙醇、石油醚提取液进行化学成分研究;以芦丁为对照品,采用NaNO2-Al(NO3)3-NaOH比色法测定琼榄不同部位中总黄酮的含量.结果:琼榄根、茎、叶、果壳中均含有糖及多糖类、氨基酸、多肽及蛋白质、黄酮、甾体及三萜类、生物碱、香豆素及内酯、挥发油等成分;均可能含有有机酸.此外,其根、叶中含有酚类、蒽醌、强心苷,茎、果壳中可能含有酚类、蒽醌、强心苷;各部位均不合皂苷.琼榄根、茎、叶、果壳中总黄酮的质量分数分别为0.028%、0.017%、0.033%、0.012%,以叶中总黄酮质量分数最高.结论:本试验初步确定了琼榄各部位的化学成分类型并测定了总黄酮的含量,可为进一步研究琼榄提供依据.%OBJECTIVE: To study the chemical components of root, stem, leaves and nut shell of Gonocaryum lobbianum, and to determine the content of total flavonoids in different parts of G. lobbianum. METHODS: The extraction of every part with water, 95% ethanol and petrol ether was respectively experimented by comprehensive preliminary tests. Using rutin as substance control, the contents of total flavonoids in different parts of G. lobbianum were measured by colorimetric method with sodium nitrite-aluminum nitrate-sodium hydroxide. RESULTS: The different parts of G. lobbianum contained sugar,polysaccharide,amino acid, polypeptide, protein, flavonoids, sterides, triterpene, alkaloids, cumarin, latones, volatile oils, and may contain organic acids. The root and leaves contained phenols, anthraquinone, cardiac glycosides, but stem and nut shell may contain phenols, anthraqui-none, cardiac glycosides. All of them didn't contain saponins. The content of total flavonoids of root, stem, leaves, nut shell were 0.028%, 0

  11. Chemical simulation of greywater.

    Science.gov (United States)

    Abed, Suhail Najem; Scholz, Miklas

    2016-01-01

    Sustainable water resources management attracts considerable attention in today's world. Recycling and reuse of both wastewater and greywater are becoming more attractive. The strategy is to protect ecosystem services by balancing the withdrawal of water and the disposal of wastewater. In the present study, a timely and novel synthetic greywater composition has been proposed with respect to the composition of heavy metals, nutrients and organic matter. The change in water quality of the synthetic greywater due to increasing storage time was monitored to evaluate the stability of the proposed chemical formula. The new greywater is prepared artificially using analytical-grade chemicals to simulate either low (LC) or high (HC) pollutant concentrations. The characteristics of the synthetic greywater were tested (just before starting the experiment, after two days and a week of storage under real weather conditions) and compared to those reported for real greywater. Test results for both synthetic greywater types showed great similarities with the physiochemical properties of published findings concerning real greywater. Furthermore, the synthetic greywater is relatively stable in terms of its characteristics for different storage periods. However, there was a significant (p change was also noted for the reduction (70%) of nitrate-nitrogen (NO3-N) concerning HC greywater after seven days of storage. PMID:26745659

  12. Advanced Chemical Propulsion

    Science.gov (United States)

    Alexander, L.

    2004-11-01

    Improving the performance and reliability characteristics of chemical propulsion systems requires research and testing of higher-performance propellants, higher efficiency thrusters, cryogenics technology, lightweight components and advancements in propulsion system design and assessment. Propellants are being investigated to identify practical combinations with higher efficiencies and better thermal properties to reduce thermal control requirements. This includes combinations with modest increases, such as LOX-hydrazine, as well as a new evaluation of major improvements available from fluorine-bearing oxidizers. Practical ways of implementing cryogenic propulsion to further increase efficiency are also being studied. Some potential advances include small pump-fed engines, and improvements in cryocooler technology and tank pressure control. Gelled propellants will be tested to determine the practicality of letting propellants freeze at low environmental temperatures and thawing them only when required for use. The propellant tank is typically the single highest non-expendable mass in a chemical propulsion system. Lightweight tank designs, materials and methods of fabrication are being investigated. These are projected to offer a 45-50 percent decrease in tank mass, representing the potential inert system mass savings. Mission and systems analyses are being conducted to guide the technology research and set priorities for technology investment, based on estimated gains in payload and mission capabilities. This includes development of advanced assessment tools and analyses of specific missions selected from Science Missions' Directorate. The goal is to mature a suite of reliable advanced propulsion technologies that will promote more cost efficient missions through the reduction of interplanetary trip time, increased scientific payload mass fraction and longer on-station operations. This talk will review the Advanced Chemical technology development roadmap, current

  13. Instroduction of whole technique in chemical environment management

    Institute of Scientific and Technical Information of China (English)

    ShenYW; NieJL

    2002-01-01

    Chemical environmental management is the important works in the environmental protecting regulation of all countries in the world.It mainly includes:chemical testing,testing laboratory quality assurance,good laboratory practices(GLP),chemical inventory,existing chemical risk assessment,new chemical hazardous evaluation,and other administrative management,i.e.chemical risk management,chemical administrative accreditation,chemical decision-making and so on.This paper reviewed the management technical criteria and standards belong to the chemical environmental management in developed countries,and introduced the whole technique in chemical management,described the relationship between those techniques,at last,provided some suggestions about chemical environmental manage ment in China.

  14. Microfluidic chemical reaction circuits

    Science.gov (United States)

    Lee, Chung-cheng; Sui, Guodong; Elizarov, Arkadij; Kolb, Hartmuth C.; Huang, Jiang; Heath, James R.; Phelps, Michael E.; Quake, Stephen R.; Tseng, Hsian-rong; Wyatt, Paul; Daridon, Antoine

    2012-06-26

    New microfluidic devices, useful for carrying out chemical reactions, are provided. The devices are adapted for on-chip solvent exchange, chemical processes requiring multiple chemical reactions, and rapid concentration of reagents.

  15. Chemical Security Analysis Center

    Data.gov (United States)

    Federal Laboratory Consortium — In 2006, by Presidential Directive, DHS established the Chemical Security Analysis Center (CSAC) to identify and assess chemical threats and vulnerabilities in the...

  16. Prediction of cancer drugs by chemical-chemical interactions.

    Directory of Open Access Journals (Sweden)

    Jing Lu

    Full Text Available Cancer, which is a leading cause of death worldwide, places a big burden on health-care system. In this study, an order-prediction model was built to predict a series of cancer drug indications based on chemical-chemical interactions. According to the confidence scores of their interactions, the order from the most likely cancer to the least one was obtained for each query drug. The 1(st order prediction accuracy of the training dataset was 55.93%, evaluated by Jackknife test, while it was 55.56% and 59.09% on a validation test dataset and an independent test dataset, respectively. The proposed method outperformed a popular method based on molecular descriptors. Moreover, it was verified that some drugs were effective to the 'wrong' predicted indications, indicating that some 'wrong' drug indications were actually correct indications. Encouraged by the promising results, the method may become a useful tool to the prediction of drugs indications.

  17. Handbook of mutagenicity test procedures

    International Nuclear Information System (INIS)

    This book consists of 39 chapters. Some of the titles are: Bacillus subtilis repair test, Induced reversion using human adenovirus, The fluctuation test in bacteria, Chemical mutagenesis with diploid human fibroblasts, The specific locus test in the mouse, The bone marrow micronucleus test, and Sperm morphology in testing in mice

  18. Protonation and structural/chemical stability of Ln2NiO4+δ ceramics vs. H2O/CO2: High temperature/water pressure ageing tests

    International Nuclear Information System (INIS)

    Highlights: • High temperature/water pressure autoclave is used to study the reaction/corrosion at SOFC/HTSE electrode. • High stability of Pr2NiO4+δ (PNO) and Nd2NiO4+δ (NNO) dense ceramics vs. water pressure is demonstrated. • Protonated rare-earth nickelates retain the perovskite-type structure and their H-content is determined. • Very low laser illumination power is required to avoid RE nickelate phase transition. • Nickelates show increasing stability from La to Pr/Nd vs. CO2-rich high temperature water vapor. - Abstract: Mixed ionic-electronic conductors (MIEC) such as rare-earth nickelates with a general formula Ln2NiO4+δ (Ln = La, Pr, Nd) appear as potential for energy production and storage systems: fuel cells, electrolysers and CO2 converters. Since a good electrode material should exhibit important stability in operating conditions, the structural and chemical stability of different nickelate-based, well-densified ceramics have been studied using various techniques: TGA, dilatometry, XRD, Raman scattering and IR spectroscopy. Consequently, La2NiO4+δ (LNO), Pr2NiO4+δ (PNO) and Nd2NiO4+δ (NNO) have been exposed during 5 days to high water vapor pressure (40 bar) at intermediate temperature (550 °C) in an autoclave device, the used water being almost free or saturated with CO2. Such protonation process offers an accelerating stability test and allows the choice of the most pertinent composition for industrial applications requiring a selected material with important life-time. In order to understand any eventual change of crystal structure, the ceramics were investigated in as-prepared, pristine state as well as after protonation and deprotonation (due to thermal treatment till 1000 °C under dry atmosphere). The results show the presence of traces or second phases originating from undesirable hydroxylation and carbonation, detected in the near-surface layers. The proton/water insertion modifies the structure symmetry and the unit

  19. Protonation and structural/chemical stability of Ln{sub 2}NiO{sub 4+δ} ceramics vs. H{sub 2}O/CO{sub 2}: High temperature/water pressure ageing tests

    Energy Technology Data Exchange (ETDEWEB)

    Upasen, S. [Sorbonne Universités, UPMC Univ Paris 06, UMR 8233, MONARIS, 75005 Paris (France); CNRS-IP2CT, UMR 8233, MONARIS, F-75005 Paris (France); Batocchi, P.; Mauvy, F. [ICMCB, ICMCB-CNRS-IUT-Université de Bordeaux, 33608 Pessac Cedex (France); Slodczyk, A. [Sorbonne Universités, UPMC Univ Paris 06, UMR 8233, MONARIS, 75005 Paris (France); CNRS-IP2CT, UMR 8233, MONARIS, F-75005 Paris (France); Colomban, Ph., E-mail: philippe.colomban@upmc.fr [Sorbonne Universités, UPMC Univ Paris 06, UMR 8233, MONARIS, 75005 Paris (France); CNRS-IP2CT, UMR 8233, MONARIS, F-75005 Paris (France)

    2015-02-15

    Highlights: • High temperature/water pressure autoclave is used to study the reaction/corrosion at SOFC/HTSE electrode. • High stability of Pr{sub 2}NiO{sub 4+δ} (PNO) and Nd{sub 2}NiO{sub 4+δ} (NNO) dense ceramics vs. water pressure is demonstrated. • Protonated rare-earth nickelates retain the perovskite-type structure and their H-content is determined. • Very low laser illumination power is required to avoid RE nickelate phase transition. • Nickelates show increasing stability from La to Pr/Nd vs. CO{sub 2}-rich high temperature water vapor. - Abstract: Mixed ionic-electronic conductors (MIEC) such as rare-earth nickelates with a general formula Ln{sub 2}NiO{sub 4+δ} (Ln = La, Pr, Nd) appear as potential for energy production and storage systems: fuel cells, electrolysers and CO{sub 2} converters. Since a good electrode material should exhibit important stability in operating conditions, the structural and chemical stability of different nickelate-based, well-densified ceramics have been studied using various techniques: TGA, dilatometry, XRD, Raman scattering and IR spectroscopy. Consequently, La{sub 2}NiO{sub 4+δ} (LNO), Pr{sub 2}NiO{sub 4+δ} (PNO) and Nd{sub 2}NiO{sub 4+δ} (NNO) have been exposed during 5 days to high water vapor pressure (40 bar) at intermediate temperature (550 °C) in an autoclave device, the used water being almost free or saturated with CO{sub 2}. Such protonation process offers an accelerating stability test and allows the choice of the most pertinent composition for industrial applications requiring a selected material with important life-time. In order to understand any eventual change of crystal structure, the ceramics were investigated in as-prepared, pristine state as well as after protonation and deprotonation (due to thermal treatment till 1000 °C under dry atmosphere). The results show the presence of traces or second phases originating from undesirable hydroxylation and carbonation, detected in the near

  20. The in-situ decontamination of sand and gravel aquifers by chemically enhanced solubilization of multiple-compound DNAPLs with surfactant solutions: Phase 1 -- Laboratory and pilot field-scale testing and Phase 2 -- Solubilization test and partitioning and interwell tracer tests. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-24

    Laboratory, numerical simulation, and field studies have been conducted to assess the potential use of micellar-surfactant solutions to solubilize chlorinated solvents contaminating sand and gravel aquifers. Ninety-nine surfactants were screened for their ability to solubilize trichloroethene (TCE), perchloroethylene (PCE), and carbon tetrachloride (CTET). The field test was conducted in the alluvial aquifer which is located 20 to 30 meters beneath a vapor degreasing operation at Paducah Gaseous Diffusion Plant. This aquifer has become contaminated with TCE due to leakage of perhaps 40,000 liters of TCE, which has generated a plume of dissolved TCE extending throughout an area of approximately 3 km{sup 2} in the aquifer. Most of the TCE is believed to be present in the overlying lacustrine deposits and in the aquifer itself as a dense, non-aqueous phase liquid, or DNAPL. The objective of the field test was to assess the efficacy of the surfactant for in situ TCE solubilization. Although the test demonstrated that sorbitan monooleate was unsuitable as a solubilizer in this aquifer, the single-well test was demonstrated to be a viable method for the in situ testing of surfactants or cosolvents prior to proceeding to full-scale remediation.

  1. The in-situ decontamination of sand and gravel aquifers by chemically enhanced solubilization of multiple-compound DNAPLs with surfactant solutions. Phase 1: Laboratory and pilot field-scale testing. Phase 2: Solubilization test and partitioning interwell tracer tests. Final report

    International Nuclear Information System (INIS)

    Laboratory, numerical simulation, and field studies have been conducted to assess the potential use of micellar-surfactant solutions to solubilize chlorinated solvents contaminating sand and gravel aquifers. Ninety-nine surfactants were screened for their ability to solubilize trichloroethene (TCE), perchloroethylene (PCE), and carbon tetrachloride (CTET). The field test was conducted in the alluvial aquifer which is located 20 to 30 meters beneath a vapor degreasing operation at Paducah Gaseous Diffusion Plant. This aquifer has become contaminated with TCE due to leakage of perhaps 40,000 liters of TCE, which has generated a plume of dissolved TCE extending throughout an area of approximately 3 km2 in the aquifer. Most of the TCE is believed to be present in the overlying lacustrine deposits and in the aquifer itself as a dense, non-aqueous phase liquid, or DNAPL. The objective of the field test was to assess the efficacy of the surfactant for in situ TCE solubilization. Although the test demonstrated that sorbitan monooleate was unsuitable as a solubilizer in this aquifer, the single-well test was demonstrated to be a viable method for the in situ testing of surfactants or cosolvents prior to proceeding to full-scale remediation

  2. Thermal Denaturation of Proteins and Chemical Equilibrium

    OpenAIRE

    Moroni, Laura; Gellini, Cristina; Remigio Salvi, Pier

    2015-01-01

    The thermal denaturation of proteins is considered as a process by means of which chemical equilibrium can be introduced to undergraduate students of Chemistry related curricula. In this approach chemical potential μ, Gibbs energy G, degree of advancement ξ and Le Châtelier principle are integrated with chemical equilibrium. With reference to α-Chymotrypsinogen A as a test case, the process is discussed in terms of a simplified two-state model. The activity is addressed to physical chemistry ...

  3. A multivariate chemical map of industrial chemicals--assessment of various protocols for identification of chemicals of potential concern.

    Science.gov (United States)

    Stenberg, Mia; Linusson, Anna; Tysklind, Mats; Andersson, Patrik L

    2009-08-01

    In present study the Industrial chemical map was created, and investigated. Molecular descriptors were calculated for 56072 organic substances from the European inventory of existing commercial chemical substances (EINECS). The resulting multivariate dataset was subjected to principal component analysis (PCA), giving five principal components, mainly reflecting size, hydrophobicity, flexibility, halogenation and electronical properties. It is these five PCs that form the basis of the map of organic, industrial chemicals, the Industrial chemical map. The similarities and diversity in chemical characteristics of the substances in relation to their persistence (P), bioaccumulation (B) and long-range transport potential were then examined, by superimposing five sets of entries obtained from other relevant databases onto the Industrial chemical map. These sets displayed very similar diversity patterns in the map, although with a spread in all five PC vectors. Substances listed by the United Nations Environment Program as persistent organic pollutants (UNEP POPs) were on the other hand clearly grouped with respect to each of the five PCs. Illustrating similarities and differences in chemical properties are one of the strengths of the multivariate data analysis method, and to be able to make predictions of, and investigate new chemicals. Further, the results demonstrate that non-testing methods as read-across, based on molecular similarities, can reduce the requirements to test industrial chemicals, provided that they are applied carefully, in combination with sound chemical knowledge. PMID:19515399

  4. Early recognition of chemical dependence.

    Science.gov (United States)

    Maly, R C

    1993-03-01

    Chemical dependence is a leading cause of morbidity and death in the United States. At least 20% of patients seen by primary care physicians in both the outpatient and inpatient setting are chemically dependent. Up to 90% of these patients go undiagnosed by their primary physicians. Chemical dependence is defined as a chronic, progressive illness characterized by the repeated and persistent use of alcohol or drugs despite negative health, family, work, financial, or legal consequences. Primary care physicians are in an ideal position to detect chemical dependence at its earliest stages, when irreversible medical consequences and death are most likely preventable. Alcohol is the most common drug of abuse. Improving the rate of recognition of chemical dependence depends on being familiar with the constellation of physical, mental, and social indicators. Early medical manifestations of alcoholism common in the primary care setting include: gastric complaints, elevated blood pressure, palpitations, traumatic injuries, headaches, impotence, and gout. Early psychosocial manifestations common in both alcohol and drug dependence include anxiety, depression, insomnia, persistent relationship conflicts, work or school problems, and financial or legal problems. Particularly useful laboratory indicators of alcoholism include elevated levels of GGT and MCV, both displaying high specificity, with the GGT level being the most sensitive. Similarly specific laboratory tests for drug dependence are not available. Any patient presenting with any of the above medical, psychosocial, or laboratory manifestations should be screened for chemical dependence. The CAGE questionnaire for alcoholism, a four-question test, is particularly well suited to the primary care setting, where it can be administered in fewer than 60 seconds. The CAGE has demonstrated high sensitivity (in the 80% range) and specificity (approximately 85%) for alcoholism. Comparably convenient instruments do not yet exist

  5. Testing the Product Test

    OpenAIRE

    Brea, H.; Grifell-Tatjé, Emili; Lovell, C.A. Knox

    2010-01-01

    The product test asks the product of a quantity index number and a price index number to equal the corresponding value change. The literature treats the product test as being so important that it is used to identify acceptable index number pairs, and to construct implicit index numbers when an otherwise desirable pair fails the test. We treat the product test as a hypothesis to be tested, and we provide an empirical application.

  6. Identification numbers for chemical structures

    International Nuclear Information System (INIS)

    Several identification (ID) numbers for chemical structures (connectivity ID number, prime ID number, weighted ID number) are analyzed and tested until a counterexample (a pair of structures with the same ID number) is found. The analysis is carried out for acyclic structures with up to 20 atoms, trees with up to 20 points, benzenoid graphs and polyhexes with up to 10 hexagons, and all connected graphs with up to 6 points. Although all the (chemical) ID numbers studied are highly selective for many families of (molecular) graphs, none of them are unique; in all three cases the counterexamples are found. However, the greatest discriminative power is shown by the weighted ID number

  7. Chemical Modification of Food Proteins

    Institute of Scientific and Technical Information of China (English)

    Allaoua Achouri; Wang Zhang; Xu Shiying

    1999-01-01

    Acylation has been shown to be an effective tool for improving surface functional properties of plant proteins.Soy bean protein has been extensively modified through chemical and enzymatic treatments. Their effectiveness lies in their high nutritional value and low cost, which promote their use as ingredients for the formulation of food products.This paper reports a complete review of chemical modification of various proteins from plant and animal sources. The nutritive and toxicological aspects through in vitro and in vivo tests are also described.

  8. 46 CFR 16.240 - Serious marine incident testing requirements.

    Science.gov (United States)

    2010-10-01

    ... chemically tested for evidence of dangerous drugs and alcohol in accordance with the requirements of 46 CFR 4... 46 Shipping 1 2010-10-01 2010-10-01 false Serious marine incident testing requirements. 16.240... CHEMICAL TESTING Required Chemical Testing § 16.240 Serious marine incident testing requirements....

  9. A summary of chemical and biological testing of proposed disposal of sediment from Richmond Harbor relative to the Deep Off-Shelf Reference Area, the Bay Farm Borrow Area, and the Alcatraz Environs Reference Area

    Energy Technology Data Exchange (ETDEWEB)

    Mayhew, H.L.; Karle, L.M.; Gruendell, B.D.; Pinza, M.R. [Battelle/Marine Sciences Lab., Sequim, WA (United States)

    1993-12-01

    The US Army Corps of Engineers was authorized to dredge Richmond Harbor to accomodate large, deep-draft vessels. An ecological evaluation of the Harbor sediments was performed describing the physical characteristics, toxic substances, effects on aquatic organisms,and potential for bioaccumulation of chemical contaminants. The objective of this report is to compare the sediment chemistry, acute toxicity, and bioaccumulation results of the Richmond Harbor sediments to each of the reference areas; i.e., the Deep Off-Shelf Reference Area, the Bay Farm Borrow Area, and the Alcatraz Environs Reference Area. This report will enable the US Army Corps of Engineers to determine whether disposal at a reference area is appropriate for all or part of the dredged material from Richmond Harbor. Chemical analyses were performed on 30 sediment samples; 28 of those samples were then combined to form 7 composites. The seven composites plus sediment from two additional stations received both chemical and biological evaluations.

  10. Design of chemical plant

    International Nuclear Information System (INIS)

    This book describes design of chemical plant, which includes chemical engineer and plan for chemical plant, development of chemical process, cost engineering pattern, design and process development, general plant construction plan, project engineering, foundation for economy on assets and depreciation, estimation for cost on capital investment and manufacturing cost, design with computers optimal design and method like fluid mechanics design chemical device and estimation for cost, such as dispatch of material and device writing on design report and appendixes.

  11. Produção de brotos de soja utilizando a cultivar BRS 216: caracterização físico-química e teste de aceitabilidade Production of soybean sprouts from the cultivar BRS 216: physical and chemical characterization and acceptability test

    Directory of Open Access Journals (Sweden)

    Marcelo Alvares de Oliveira

    2013-03-01

    Full Text Available O presente trabalho teve por objetivo avaliar os parâmetros físico-químicos e os processos para a produção de brotos de soja a partir de sementes da cultivar BRS 216, bem como sua composição química e aceitabilidade. Foram avaliados o comprimento e o peso dos brotos viáveis, a composição centesimal e os teores de isoflavonas e de inibidor de tripsina. O desenho experimental foi ao acaso com três repetições e os tratamentos foram avaliados num esquema fatorial 3 × 3: três frequências de irrigação (a cada quatro, oito e 12 horas e três períodos de crescimento (cinco, seis e sete dias. O teste de aceitabilidade dos brotos de soja foi realizado utilizando-se a escala hedônica estruturada de nove pontos, avaliando-se cor, aparência, odor, textura, sabor e avaliação global, além da intenção de compra. A frequência de irrigação com intervalos de quatro horas e o período de sete dias de crescimento foram ideais para produção dos brotos de soja, favorecendo maior produtividade, teores mais elevados de proteínas e menores teores de inibidor de tripsina. O índice de aceitabilidade dos brotos de soja foi superior a 70 em todas as características avaliadas, com exceção do odor.The aim of the present study was to evaluate the physical and chemical parameters and process for the production of soybean sprouts from the BRS 216 cultivar, as well as determining their chemical composition and acceptability. The length and weight of viable sprouts, proximate composition, and the isoflavone and trypsin inhibitor contents were evaluated. The experimental design was completely randomized with three replications, and the treatments were evaluated using a 3 × 3 factorial design: three irrigation frequencies (four, eight and 12 hours and three growth periods (five, six and seven days. The soybean sprout acceptability was determined using a nine point structured hedonic scale, evaluating colour, appearance, aroma, texture, flavour

  12. Chlamydia Testing

    Science.gov (United States)

    ... Amplification Test (NAAT); Chlamydia trachomatis Culture; Chlamydia trachomatis DNA Probe Related tests: Gonorrhea Testing , HIV Antibody and HIV Antigen , Syphilis Tests , Herpes Testing , HPV Test , Trichomonas Testing All content on Lab Tests Online has ...

  13. Syphilis Test

    Science.gov (United States)

    ... Gonorrhea Testing , Chlamydia Testing , Herpes Testing , HPV Test , Trichomonas Testing , CSF Analysis All content on Lab Tests ... testing ( polymerase chain reaction, PCR )--this test detects genetic material from the bacteria in the sample from ...

  14. DNA adducts-chemical addons

    Directory of Open Access Journals (Sweden)

    T R Rajalakshmi

    2015-01-01

    Full Text Available DNA adduct is a piece of DNA covalently bond to a chemical (safrole, benzopyrenediol epoxide, acetaldehyde. This process could be the start of a cancerous cell. When a chemical binds to DNA, it gets damaged resulting in abnormal replication. This could be the start of a mutation and without proper DNA repair, this can lead to cancer. It is this chemical that binds with the DNA is our prime area of concern. Instead of performing the whole body analysis for diagnosing cancer, this test could be carried out for early detection of cancer. When scanning tunneling microscope is used, the DNA results can be obtained earlier. DNA adducts in scientific experiments are used as biomarkers.

  15. DNA adducts-chemical addons.

    Science.gov (United States)

    Rajalakshmi, T R; AravindhaBabu, N; Shanmugam, K T; Masthan, K M K

    2015-04-01

    DNA adduct is a piece of DNA covalently bond to a chemical (safrole, benzopyrenediol epoxide, acetaldehyde). This process could be the start of a cancerous cell. When a chemical binds to DNA, it gets damaged resulting in abnormal replication. This could be the start of a mutation and without proper DNA repair, this can lead to cancer. It is this chemical that binds with the DNA is our prime area of concern. Instead of performing the whole body analysis for diagnosing cancer, this test could be carried out for early detection of cancer. When scanning tunneling microscope is used, the DNA results can be obtained earlier. DNA adducts in scientific experiments are used as biomarkers. PMID:26015708

  16. Can chemical structure predict reproductive toxicity?

    OpenAIRE

    Maslankiewicz L; Hulzebos EM; Vermeire TG; Muller JJA; Piersma AH; SEC

    2005-01-01

    Structure-Activity Relationships (SARs), including Quantitative SARs, are applied to the hazard assessment of chemicals. This need is all the more urgent considering the proposed new EU policy on chemicals in REACH, which stresses the need for non-animal testing. DEREKfW and the TSCA Chemical Category List of the New Chemicals Program of the US-EPA were chosen to predict reproductive toxicity for REACH purposes. DEREKfW is a software program predicting the toxicological properties using the l...

  17. Advances in chemical physics

    CERN Document Server

    Rice, Stuart A

    2012-01-01

    The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics field with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series serves as the perfect supplement to any advanced graduate class devoted to the study of chemical physics. This volume explores: Quantum Dynamical Resonances in Ch

  18. Gonorrhea Test

    Science.gov (United States)

    ... gonorrhoeae Culture; Neisseria gonorrhoeae Gram Stain; Neisseria gonorrhoeae DNA Probe Related tests: Chlamydia Testing , HIV Antibody and HIV Antigen , Syphilis Tests , Herpes Testing , HPV Test , Trichomonas Testing All content on Lab Tests Online has ...

  19. Do open clusters have distinguishable chemical signatures?

    CERN Document Server

    Blanco-Cuaresma, S; Heiter, U

    2015-01-01

    Past studies have already shown that stars in open clusters are chemically homogeneous (e.g. De Silva et al. 2006, 2007 and 2009). These results support the idea that stars born from the same giant molecular cloud should have the same chemical composition. In this context, the chemical tagging technique was proposed by Freeman et al. 2002. The principle is to recover disrupted stellar clusters by looking only to the stellar chemical composition. In order to evaluate the feasibility of this approach, it is necessary to test if we can distinguish between stars born from different molecular clouds. For this purpose, we studied the chemical composition of stars in 32 old and intermediate-age open clusters, and we applied machine learning algorithms to recover the original cluster by only considering the chemical signatures.

  20. Chemical Transformation Simulator

    Science.gov (United States)

    The Chemical Transformation Simulator (CTS) is a web-based, high-throughput screening tool that automates the calculation and collection of physicochemical properties for an organic chemical of interest and its predicted products resulting from transformations in environmental sy...

  1. Chemical Industry Bandwidth Study

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2006-12-01

    The Chemical Bandwidth Study provides a snapshot of potentially recoverable energy losses during chemical manufacturing. The advantage of this study is the use of "exergy" analysis as a tool for pinpointing inefficiencies.

  2. Personal Chemical Exposure informatics

    Science.gov (United States)

    Chemical Exposure science is the study of human contact with chemicals (from manufacturing facilities, everyday products, waste) occurring in their environments and advances knowledge of the mechanisms and dynamics of events that cause or prevent adverse health outcomes. (adapted...

  3. Tobacco and chemicals (image)

    Science.gov (United States)

    Some of the chemicals associated with tobacco smoke include ammonia, carbon dioxide, carbon monoxide, propane, methane, acetone, hydrogen cyanide and various carcinogens. Other chemicals that are associated with chewing ...

  4. Chemical Search Web Utility

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Chemical Search Web Utility is an intuitive web application that allows the public to easily find the chemical that they are interested in using, and which...

  5. Capacitive chemical sensor

    Science.gov (United States)

    Manginell, Ronald P; Moorman, Matthew W; Wheeler, David R

    2014-05-27

    A microfabricated capacitive chemical sensor can be used as an autonomous chemical sensor or as an analyte-sensitive chemical preconcentrator in a larger microanalytical system. The capacitive chemical sensor detects changes in sensing film dielectric properties, such as the dielectric constant, conductivity, or dimensionality. These changes result from the interaction of a target analyte with the sensing film. This capability provides a low-power, self-heating chemical sensor suitable for remote and unattended sensing applications. The capacitive chemical sensor also enables a smart, analyte-sensitive chemical preconcentrator. After sorption of the sample by the sensing film, the film can be rapidly heated to release the sample for further analysis. Therefore, the capacitive chemical sensor can optimize the sample collection time prior to release to enable the rapid and accurate analysis of analytes by a microanalytical system.

  6. Chemicals Industry Vision

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1996-12-01

    Chemical industry leaders articulated a long-term vision for the industry, its markets, and its technology in the groundbreaking 1996 document Technology Vision 2020 - The U.S. Chemical Industry. (PDF 310 KB).

  7. Advances in chemical physics

    CERN Document Server

    Prigogine, Ilya

    2009-01-01

    The Advances in Chemical Physics series provides the chemical physics and physical chemistry fields with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series serves as the perfect supplement to any advanced graduate class devoted to the study of chemical physics.

  8. Models of Chemical Evolution

    OpenAIRE

    Matteucci, Francesca

    2003-01-01

    The basic principles underlying galactic chemical evolution and the most important results of chemical evolution models are discussed. In particular, the chemical evolution of the Milky Way galaxy, for which we possess the majority of observational constraints, is described. Then, it is shown how different star formation histories influence the chemical evolution of galaxies of different morphological type. Finally, the role of abundances and abundance ratios as cosmic clocks is emphasized an...

  9. Chemical evolution and life

    OpenAIRE

    Malaterre Christophe

    2015-01-01

    In research on the origins of life, the concept of “chemical evolution” aims at explaining the transition from non-living matter to living matter. There is however strong disagreement when it comes to defining this concept more precisely, and in particular with reference to a chemical form of Darwinian evolution: for some, chemical evolution is nothing but Darwinian evolution applied to chemical systems before life appeared; yet, for others, it is the type of evolution that happened before na...

  10. Computing Equilibrium Chemical Compositions

    Science.gov (United States)

    Mcbride, Bonnie J.; Gordon, Sanford

    1995-01-01

    Chemical Equilibrium With Transport Properties, 1993 (CET93) computer program provides data on chemical-equilibrium compositions. Aids calculation of thermodynamic properties of chemical systems. Information essential in design and analysis of such equipment as compressors, turbines, nozzles, engines, shock tubes, heat exchangers, and chemical-processing equipment. CET93/PC is version of CET93 specifically designed to run within 640K memory limit of MS-DOS operating system. CET93/PC written in FORTRAN.

  11. What Is Chemical Stoichiometry?

    Science.gov (United States)

    Smith, William R.; Missen, Ronald W.

    1979-01-01

    Chemical stoichiometry is discussed free from kinetic or thermodynamic considerations. The means for determining the following are presented: the number of stoichiometric degrees of freedom, the number of components, a permissible set of chemical equations, and a permissible set of components, for a closed system undergoing chemical reaction.…

  12. Chemical Recycle of Plastics

    Directory of Open Access Journals (Sweden)

    Sara Fatima

    2014-11-01

    Full Text Available Various chemical processes currently prevalent in the chemical industry for plastics recycling have been discussed. Possible future scenarios in chemical recycling have also been discussed. Also analyzed are the effects on the environment, the risks, costs and benefits of PVC recycling. Also listed are the various types of plastics and which plastics are safe to use and which not after rcycle

  13. Equilibrium Chemical Engines

    OpenAIRE

    Shibata, Tatsuo; Sasa, Shin-ichi

    1997-01-01

    An equilibrium reversible cycle with a certain engine to transduce the energy of any chemical reaction into mechanical energy is proposed. The efficiency for chemical energy transduction is also defined so as to be compared with Carnot efficiency. Relevance to the study of protein motors is discussed. KEYWORDS: Chemical thermodynamics, Engine, Efficiency, Molecular machine.

  14. Chemical and Environmental Technology.

    Science.gov (United States)

    Sheather, Harry

    The two-year curriculum in chemical technology presented in the document is designed to prepare high school graduates for technical positions in the chemical industry. Course outlines are given for general chemistry, chemical calculations, quantitative analysis, environmental chemistry, organic chemistry 1 and 2, instrumental analysis, and…

  15. Joint chemical agent detector (JCAD): the future of chemical agent detection

    Science.gov (United States)

    Laljer, Charles E.

    2003-08-01

    The Joint Chemical Agent Detector (JCAD) has continued development through 2002. The JCAD has completed Contractor Validation Testing (CVT) that included chemical warfare agent testing, environmental testing, electromagnetic interferent testing, and platform integration validation. The JCAD provides state of the art chemical warfare agent detection capability to military and homeland security operators. Intelligence sources estimate that over twenty countries have active chemical weapons programs. The spread of weapons of mass destruction (and the industrial capability for manufacture of these weapons) to third world nations and terrorist organizations has greatly increased the chemical agent threat to U.S. interests. Coupled with the potential for U.S. involvement in localized conflicts in an operational or support capacity, increases the probability that the military Joint Services may encounter chemical agents anywhere in the world. The JCAD is a small (45 in3), lightweight (2 lb.) chemical agent detector for vehicle interiors, aircraft, individual personnel, shipboard, and fixed site locations. The system provides a common detection component across multi-service platforms. This common detector system will allow the Joint Services to use the same operational and support concept for more efficient utilization of resources. The JCAD detects, identifies, quantifies, and warns of the presence of chemical agents prior to onset of miosis. Upon detection of chemical agents, the detector provides local and remote audible and visual alarms to the operators. Advance warning will provide the vehicle crew and other personnel in the local area with the time necessary to protect themselves from the lethal effects of chemical agents. The JCAD is capable of being upgraded to protect against future chemical agent threats. The JCAD provides the operator with the warning necessary to survive and fight in a chemical warfare agent threat environment.

  16. Chemical Genomics Profiling of Environmental Chemical Modulation of Human Nuclear Receptors

    OpenAIRE

    Huang, Ruili; Xia, Menghang; Cho, Ming-Hsuang; Sakamuru, Srilatha; Shinn, Paul; Houck, Keith A.; Dix, David J; Judson, Richard S.; Witt, Kristine L.; Kavlock, Robert J.; Tice, Raymond R.; Austin, Christopher P.

    2011-01-01

    Background: The large and increasing number of chemicals released into the environment demands more efficient and cost-effective approaches for assessing environmental chemical toxicity. The U.S. Tox21 program has responded to this challenge by proposing alternative strategies for toxicity testing, among which the quantitative high-throughput screening (qHTS) paradigm has been adopted as the primary tool for generating data from screening large chemical libraries using a wide spectrum of assa...

  17. Automatic reaction to a chemical event detected by a low-cost wireless chemical sensing network

    OpenAIRE

    Beirne, Stephen; Lau, King-Tong; Corcoran, Brian; Diamond, Dermot

    2009-01-01

    A test-scale wireless chemical sensor network (WCSN) has been deployed within a controlled Environmental Chamber (EC). The combined signals from the WCSN were used to initiate a controllable response to the detected chemical event. When a particular sensor response pattern was obtained, a purging cycle was initiated. Sensor data were continuously checked against user-defined action limits, to determine if a chemical event had occurred. An acidic contaminant was used to demonstrate the respons...

  18. Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration. 2. ed.

    International Nuclear Information System (INIS)

    This part of ISO 11140 specifies the performance of the indicator system in combination with the test load with which it is intended to be used. The test load may be presented with the indicator system already incorporated and intended for single use, or it may be intended for multiple use with a new indicator system to be inserted prior to each use. The indicator for which the performance is specified in this part of ISO 11140 is intended to indicate when steam penetration has been inadequate. The performance of the indicator specified in this part of ISO 11140 should be equivalent, but not necessarily identical, to the performance obtained in the Bowie and Dick-type test as described in ISO 11140-3. Equivalence should be regarded as providing a similar response to steam penetration with any differences being predictable and such that the necessary level of assurance of satisfactory steam penetration is provided. An indicator meeting this specification is not intended to identify which of the potential causes of poor steam penetration was responsible for the failure indicated by the test. This part of ISO 11140 specifies the performance for a Class 2 indicator to be used as an alternative to the Bowie and Dick-type test for steam sterilizers for wrapped health care goods (instruments, etc., and porous loads). The Bowie and Dick-type test is used for routine testing of steam sterilizers and validation of steam sterilization processes. An indicator complying with this part of ISO 11140 incorporates a specified material which is used as a test load. This test load may, or may not, be re-usable. This part of ISO 11140 does not specify requirements for the test load, but specifies the performance of the indicator in combination with the test load with which it is intended to be used. The indicator specified in this part of ISO 11140 is intended to identify poor steam penetration but does not necessarily indicate the cause of this poor steam penetration. This part of

  19. Advances in chemical physics

    CERN Document Server

    Rice, Stuart A

    2012-01-01

    The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics and physical chemistry fields with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series presents contributions from internationally renowned chemists and serves as the perfect supplement to any advanced graduate class devoted to the study o

  20. Advances in chemical physics

    CERN Document Server

    Rice, Stuart A

    2011-01-01

    The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics and physical chemistry fields with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series offers contributions from internationally renowned chemists and serves as the perfect supplement to any advanced graduate class devoted to the study of che

  1. Advances in chemical physics

    CERN Document Server

    Rice, Stuart A

    2014-01-01

    Advances in Chemical Physics is the only series of volumes available that explores the cutting edge of research in chemical physics. This is the only series of volumes available that presents the cutting edge of research in chemical physics.Includes contributions from experts in this field of research.Contains a representative cross-section of research that questions established thinking on chemical solutions.Structured with an editorial framework that makes the book an excellent supplement to an advanced graduate class in physical chemistry or chemical physics.

  2. Advances in chemical Physics

    CERN Document Server

    Rice, Stuart A

    2011-01-01

    The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics and physical chemistry fields with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series offers contributions from internationally renowned chemists and serves as the perfect supplement to any advanced graduate class devoted to the study of che

  3. Development of chemical dosimeters

    International Nuclear Information System (INIS)

    A chemical dosimeter is a system that measures the energy by virtue of chemical changes from ionizing absorbed radiation produced unit when it is exposed to ionizing radiation. In all chemical dosimeters radiation induced chemical reaction produces at least one, initially absent species, which is properties long lived enough to determine its quantity or the change in the initial systems. Different types of chemical dosimeters were discussed such as aqueous, gaseous and solid, but the great consideration was given to aqueous systems because of their vital role in setting many processes.(Author)

  4. On-line investigation of short-lived Os and Re isotopes as a test for chemical studies of 108 (Hs) and 107 (Bh) elements in HCl solutions by continuous chromatography

    International Nuclear Information System (INIS)

    On-line chemistry studies of short-lived isotopes of Os and Re, as homologs of 108 (Hs) and 107 (Bh), respectively, produced in the nuclear reactions at the (LNR, Dubna) cyclotron have been carried out. It was shown, that Os and Re are not sorbed on cation exchangers, but very strongly sorbed on anion exchangers from diluted HCl solutions. Re is also retained by a TOPO containing sorbent and may be separated from Os. The possibilities of chemical species and oxidation states investigation of short-lived transactinide elements by continuous chromatography have been shown. (author)

  5. Physico-chemical Analysis, Microbial Isolation, Sensitivity Test of the Isolates and Solar Disinfection of Water Running in Community Taps and River Kandutura in Nakuru North Sub-county, Kenya

    OpenAIRE

    Waithaka, Paul N; Maingi, John Muthini; Nyamache, Anthony Kebira

    2015-01-01

    Nakuru North sub-county is a peri-urban area which has both dry and wet seasons. Its residents rely mostly on untreated water sources for daily water needs due to unreliable water supply from the urban council. However, this water has not been evaluated on its quality despite residents solely depending on it. This study was aimed at determining the physico-chemical and bacteriological quality of water drawn from River Kandutura and water taps in Nakuru North sub-county. In addition, the study...

  6. Copper elimination during secondary side chemical cleaning

    International Nuclear Information System (INIS)

    Laboratory tests have been carried out to evaluate the capability of EDF chemical cleaning solution to dissolve copper. If laboratory air bubbling is not efficient, oxygen bubbling was used in these tests with success. The results concerning the copper dissolution capacity of the gluconic-citric solution are very interesting: the copper concentration can reach the value of 15 g/l. (author)

  7. Chemical modeling of waste sludges

    Energy Technology Data Exchange (ETDEWEB)

    Weber, C.F.; Beahm, E.C.

    1996-10-01

    The processing of waste from underground storage tanks at the Oak Ridge National Laboratory (ORNL) and other facilities will require an understanding of the chemical interactions of the waste with process chemicals. Two aspects of sludge treatment should be well delineated and predictable: (1) the distribution of chemical species between aqueous solutions and solids, and (2) potential problems due to chemical interactions that could result in process difficulties or safety concerns. It is likely that the treatment of waste tank sludge will begin with washing, followed by basic or acidic leaching. The dissolved materials will be in a solution that has a high ionic strength where activity coefficients are far from unity. Activity coefficients are needed in order to calculate solubilities. Several techniques are available for calculating these values, and each technique has its advantages and disadvantages. The techniques adopted and described here is the Pitzer method. Like any of the methods, prudent use of this approach requires that it be applied within concentration ranges where the experimental data were fit, and its use in large systems should be preceded by evaluating subsystems. While much attention must be given to the development of activity coefficients, other factors such as coprecipitation of species and Ostwald ripening must also be considered when one aims to interpret results of sludge tests or to predict results of treatment strategies. An understanding of sludge treatment processes begins with the sludge tests themselves and proceeds to a general interpretation with the aid of modeling. One could stop with only data from the sludge tests, in which case the table of data would become an implicit model. However, this would be a perilous approach in situations where processing difficulties could be costly or result in concerns for the environment or health and safety.

  8. Chemical exchange program analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Waffelaert, Pascale

    2007-09-01

    As part of its EMS, Sandia performs an annual environmental aspects/impacts analysis. The purpose of this analysis is to identify the environmental aspects associated with Sandia's activities, products, and services and the potential environmental impacts associated with those aspects. Division and environmental programs established objectives and targets based on the environmental aspects associated with their operations. In 2007 the most significant aspect identified was Hazardous Materials (Use and Storage). The objective for Hazardous Materials (Use and Storage) was to improve chemical handling, storage, and on-site movement of hazardous materials. One of the targets supporting this objective was to develop an effective chemical exchange program, making a business case for it in FY07, and fully implementing a comprehensive chemical exchange program in FY08. A Chemical Exchange Program (CEP) team was formed to implement this target. The team consists of representatives from the Chemical Information System (CIS), Pollution Prevention (P2), the HWMF, Procurement and the Environmental Management System (EMS). The CEP Team performed benchmarking and conducted a life-cycle analysis of the current management of chemicals at SNL/NM and compared it to Chemical Exchange alternatives. Those alternatives are as follows: (1) Revive the 'Virtual' Chemical Exchange Program; (2) Re-implement a 'Physical' Chemical Exchange Program using a Chemical Information System; and (3) Transition to a Chemical Management Services System. The analysis and benchmarking study shows that the present management of chemicals at SNL/NM is significantly disjointed and a life-cycle or 'Cradle-to-Grave' approach to chemical management is needed. This approach must consider the purchasing and maintenance costs as well as the cost of ultimate disposal of the chemicals and materials. A chemical exchange is needed as a mechanism to re-apply chemicals on site. This

  9. Identification and Prioritization of Chemical Mixtures from Environmental Residue Data

    Science.gov (United States)

    High throughput toxicity testing has greatly improved the speed at which single chemicals can be screened using in vitro methods. However, people are not exposed to a single chemical at a time, rather to a mixture of chemicals. Even with the increased speed of these methods, te...

  10. Interim report task 2: performance testing - task 2.4: natural mineral analog studies physical and chemical characteristics of brannerite in natural systems to Lawrence Livermore National Laboratory under contract B345772

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, G R; Colella, M; Leung, S H F

    2000-04-30

    To investigate the long-term alteration behavior of brannerite, we have undertaken a study of 13 natural samples from various geological environments, including granites, granitic pegmatites, quartz veins, and placer deposits. Literature data and U-Th-Pb chemical dating carried out in this work indicate that the samples range in age from approximately 20 Ma to 1580 Ma. Where independent age data or estimates are available for comparison, the U-Th-Pb chemical ages are in reasonable agreement for the younger samples, but the older samples tend to show evidence for Pb loss (up to about 80%), a common feature of metamict Nb, Ta, and Ti oxide minerals. Our results show that many of the samples exhibit only minor alteration, usually within small patches, microfractures, or around the rims of the brannerite crystals. Other samples consist of variable amounts of unaltered and altered brannerite. Heavily altered samples may contain anatase and thorite as fine-grained alteration products. Certain samples exhibited fracturing of the associated rock matrix or mineral phase in the immediate vicinity of the brannerite grains. These fractures contain U bearing material and indicate that some U migrated locally from the source brannerite.

  11. Organophosphorus Pesticide Application in Food Poisoning Goods Fast Food Physical and Chemical Test Box Corroborate the Method of Research%食物中毒检品中有机磷农药应用食品理化检验箱快速确证的方法研究

    Institute of Scientific and Technical Information of China (English)

    徐敏

    2015-01-01

    目的:探讨有机磷农药中毒时使用食品理化检验箱快速确证的方法。方法使用中国人民解放军总后勤部卫生部监制、军事医学科学院环境医学研究所研制的食品理化检验箱对出现有机磷农药中毒时进行有机磷农药的相关检测。结果通过使用食品理化检验箱的方式,快速而准确的将有机磷农药进行了检出。结论在对食物中毒患者进行检验的过程中,使用食品理化检验箱的方式能够快速而准确地将有机磷农药进行检出,从而保证我国人民的身体健康以及生命安全。并能得到及时的救治。%Objective To explore the organic phosphorus pesticide poisoning when using food physical and chemical test case confirmed quickly method. MethodsUses the Chinese people's liberation army general logistics department of the ministry of health supervision, military academy of medical sciences institute of environmental medicine developed food physical and chemical test cases for organophosphorus pesticide poisoning of organophosphorus pesticide and the related test.Results Through the use of food physical and chemical inspection way, rapid and accurate detection is made for the organophosphorus pesticide.Conclusion In the process of testing in patients with food poisoning, the use of food physical and chemical test box way to quickly and accurately wil be organophosphorus pesticide detection, to ensure the life safety and health of our people.

  12. Susceptibility Testing

    Science.gov (United States)

    ... page helpful? Also known as: Sensitivity Testing; Drug Resistance Testing; Culture and Sensitivity; C & S; Antimicrobial Susceptibility Formal name: Bacterial and Fungal Susceptibility Testing Related tests: Urine Culture ; ...

  13. Chemical compounds in teak

    Directory of Open Access Journals (Sweden)

    Fernanda Viana da Silva Leonardo

    2015-09-01

    Full Text Available Quinone compounds are largely generated at extractive fraction of the woods in a complex and variable biological system. The literature has indications for many segments from food industry to pharmaceutical industry. Within the field of industrial use of wood, they are less desirable since they are treated only as incidental substances in production strings of pulp, paper, charcoal, and sawmill. In spite of its small amount, compared to other chemical compounds called essential, these substances have received special attention from researchers revealing a diverse range of offerings to market products textiles, pharmaceuticals, colorants, and other polymers, for which are being tested and employed. Quinones are found in fungi, lichens, and mostly in higher plants. Tectona grandis, usually called teak, is able to biosynthesize anthraquinones, which is a quinone compound, byproduct of secondary metabolism. This species provides wood that is much prized in the furniture sector and can also be exploited for metabolites to supply the market in quinone compounds and commercial development of new technologies, adding value to the plantations of this species within our country.

  14. Chemical protection against ionizing radiation

    International Nuclear Information System (INIS)

    Over 40 years have passed since the research of the Manhattan Project suggested the possibility of chemical protection against ionizing radiation. During that time, much has been learned about the nature of radiation-induced injury and the factors governing the expression of that injury. Thousands of compounds have been tested for radioprotective efficacy, and numerous theories have been proposed to account for these actions. The literature on chemical radioprotection is large. In this article, the authors consider several of the mechanisms by which chemicals may protect against radiation injury. They have chosen to accent this view of radioprotector research as opposed to that research geared toward developing specific molecules as protective agents because they feel that such an approach is more beneficial in stimulating research of general applicability. This paper describes the matrix of biological factors upon which an exogenous radioprotector is superimposed, and examines evidence for and against various mechanisms by which these agents may protect biological systems against ionizing radiation. It concludes with a brief outlook for research in chemical radioprotection

  15. Predicting Anatomical Therapeutic Chemical (ATC classification of drugs by integrating chemical-chemical interactions and similarities.

    Directory of Open Access Journals (Sweden)

    Lei Chen

    Full Text Available The Anatomical Therapeutic Chemical (ATC classification system, recommended by the World Health Organization, categories drugs into different classes according to their therapeutic and chemical characteristics. For a set of query compounds, how can we identify which ATC-class (or classes they belong to? It is an important and challenging problem because the information thus obtained would be quite useful for drug development and utilization. By hybridizing the informations of chemical-chemical interactions and chemical-chemical similarities, a novel method was developed for such purpose. It was observed by the jackknife test on a benchmark dataset of 3,883 drug compounds that the overall success rate achieved by the prediction method was about 73% in identifying the drugs among the following 14 main ATC-classes: (1 alimentary tract and metabolism; (2 blood and blood forming organs; (3 cardiovascular system; (4 dermatologicals; (5 genitourinary system and sex hormones; (6 systemic hormonal preparations, excluding sex hormones and insulins; (7 anti-infectives for systemic use; (8 antineoplastic and immunomodulating agents; (9 musculoskeletal system; (10 nervous system; (11 antiparasitic products, insecticides and repellents; (12 respiratory system; (13 sensory organs; (14 various. Such a success rate is substantially higher than 7% by the random guess. It has not escaped our notice that the current method can be straightforwardly extended to identify the drugs for their 2(nd-level, 3(rd-level, 4(th-level, and 5(th-level ATC-classifications once the statistically significant benchmark data are available for these lower levels.

  16. Radiolabelling of chemicals

    International Nuclear Information System (INIS)

    Labeling of chemical additives with radioactive isotopes can solve numerous problems in geothermal operations. The physical and chemical behavior of many chemicals slated for geothermal operations can be studied with the required detail at the extremely low concentration of the commercially available (non-labeled) compounds. The problems of labeling and the basics of these radioactively labeled chemicals are described in this report. Conclusions of this study are: (1) chemicals labeled with radioactive isotopes can be used to investigate the chemical and physical behavior of chemical additives used in geothermal operations. The high detection limits make this technology superior to conventional analytical and monitoring methods; (2) severe difficulties exist for utilizing of radioactively labeled chemicals in geothermal operations. The labeling itself can cause technical problems. Another host of problems is caused by the reluctance of chemical manufacturers to release the necessary proprietary information on their chemicals required for proper labeling; and (3) previous attempts to manufacture radioactively labeled flocculants and to utilize them in a geothermal operation were prematurely abandoned for a number of reasons

  17. Chemical bond fundamental aspects of chemical bonding

    CERN Document Server

    Frenking, Gernot

    2014-01-01

    This is the perfect complement to ""Chemical Bonding - Across the Periodic Table"" by the same editors, who are two of the top scientists working on this topic, each with extensive experience and important connections within the community. The resulting book is a unique overview of the different approaches used for describing a chemical bond, including molecular-orbital based, valence-bond based, ELF, AIM and density-functional based methods. It takes into account the many developments that have taken place in the field over the past few decades due to the rapid advances in quantum chemica

  18. Paraffin wax deposits and chemical inhibitors

    Energy Technology Data Exchange (ETDEWEB)

    Mendell, J.L.

    1970-01-01

    Solutions to this problem becomes necessary with the advent of extremely deep production, offshore production, and the probability of ocean-floor completions. The reasons for paraffin-wax accumulations are many and difficult to pinpoint. Inhibition of these paraffin deposits appears to be the best solution. Paraffin solvents and inhibitors are as follows: solvents, wetting agents, dispersants, and crystal modifiers. Solvents are effective, but can harm a refinery catalyst and create health hazards. Wetting agents and dispersants comprise the majority of chemicals used as paraffin wax inhibitors. Crystal modifiers are relatively new and may provide the most efficient means of reducing deposition. Evaluations of chemical paraffin inhibitors are outlined. Field test results which consider the various chemicals tested may give satisfactory results in determining which particular chemical can solve the problem of the particular situation. (38 refs.)

  19. Revolutionizing Toxicity Testing For Predicting Developmental Outcomes (DNT4)

    Science.gov (United States)

    Characterizing risk from environmental chemical exposure currently requires extensive animal testing; however, alternative approaches are being researched to increase throughput of chemicals screened, decrease reliance on animal testing, and improve accuracy in predicting adverse...

  20. Ethics of Chemical Synthesis

    OpenAIRE

    Joachim Schummer

    2001-01-01

    Unlike other branches of science, the scientific products of synthetic chemistry are not only ideas but also new substances that change our material world, for the benefit or harm of living beings. This paper provides for the first time a systematical analysis of moral issues arising from chemical synthesis, based on concepts of responsibility and general morality. Topics include the questioning of moral neutrality of chemical synthesis as an end in itself, chemical weapons research, moral ob...

  1. Modelling the chemical evolution

    OpenAIRE

    Hensler, Gerhard; Recchi, Simone

    2010-01-01

    Advanced observational facilities allow to trace back the chemical evolution of the Universe, on the one hand, from local objects of different ages and, secondly, by direct observations of redshifted objects. The chemical enrichment serves as one of the cornerstones of cosmological evolution. In order to understand this chemical evolution in morphologically different astrophysical objects models are constructed based on analytical descriptions or numerical methods. For the comparison of their...

  2. Polymers for chemical sensing

    Directory of Open Access Journals (Sweden)

    Krishna C. Persaud

    2005-04-01

    Full Text Available Chemical sensors play an increasingly important role in monitoring the environment we live in, providing information on industrial manufacturing processes and their emissions, quality control of foods and beverages, and a host of other applications. Electrically conductive plastics are being developed for many useful applications. Improvement in understanding of the physical and chemical mechanisms by which electrical conduction occurs in these materials is now leading to a new generation of chemical sensors, which are reviewed in this article.

  3. Chemical and biological weapons

    International Nuclear Information System (INIS)

    This paper discusses the prospects of the multilateral negotiations aimed at achieving a complete and total ban on chemical weapons the Chemical Weapons convention (CWC). The control of the proliferation of chemical weapons is no longer just on East-West issue; it is also an issue of concern in Third World Countries, and in some of the wealthier middle eastern nations, such as Kuwait

  4. Chemical differentiation of planets: a core issue

    OpenAIRE

    Toulhoat, Herve; Beaumont, Valerie; Zgonnik, Viacheslav; Larin, Nikolay; Larin, Vladimir N.

    2012-01-01

    Prevalent theories of the Solar System formation minimize the role of matter ionization and magnetic field in the Solar nebula. Instead, we propose that a magnetically driven chemical gradient at the scale of the Solar nebula has imprinted chemical differentiation of planets in the further accretion stages. For a given planet, we theoretically relate element abundances relative to Sun to first ionization potentials and distance to Sun. This simple model is successfully tested against availabl...

  5. Laboratory of Chemical Physics

    Data.gov (United States)

    Federal Laboratory Consortium — Current research in the Laboratory of Chemical Physics is primarily concerned with experimental, theoretical, and computational problems in the structure, dynamics,...

  6. Introduction to chemical kinetics

    CERN Document Server

    Soustelle, Michel

    2013-01-01

    This book is a progressive presentation of kinetics of the chemical reactions. It provides complete coverage of the domain of chemical kinetics, which is necessary for the various future users in the fields of Chemistry, Physical Chemistry, Materials Science, Chemical Engineering, Macromolecular Chemistry and Combustion. It will help them to understand the most sophisticated knowledge of their future job area. Over 15 chapters, this book present the fundamentals of chemical kinetics, its relations with reaction mechanisms and kinetic properties. Two chapters are then devoted to experimental re

  7. Prenatal Tests

    Science.gov (United States)

    ... Close X Home > Pregnancy > Prenatal care > Prenatal tests Prenatal tests E-mail to a friend Please fill ... even if you’re feeling fine. What are prenatal tests? Prenatal tests are medical tests you get ...

  8. Trichomonas Testing

    Science.gov (United States)

    ... vaginalis by Direct Fluorescent Antibody (DFA) Related tests: Pap Smear , Chlamydia Testing , Gonorrhea Testing At a Glance Test ... during a routine gynecologic examination that includes a Pap smear . An FDA-cleared PCR test approved for detection ...

  9. Pinworm test

    Science.gov (United States)

    Oxyuriasis test; Enterobiasis test; Tape test ... diagnose this infection is to do a tape test. The best time to do this is in ... to determine if there are eggs. The tape test may need to be done on 3 separate ...

  10. Seismic testing

    International Nuclear Information System (INIS)

    This lecture deals with: qualification methods for seismic testing; objectives of seismic testing; seismic testing standards including examples; main content of standard; testing means; and some important elements of seismic testing

  11. Multicomponent criteria for predicting carcinogenicity: dataset of 30 NTP chemicals.

    OpenAIRE

    Huff, J; Weisburger, E; Fung, V A

    1996-01-01

    This article is in response to the challenge issued to the scientific community by the National Toxicology Program to predict the carcinogenicity potential of 30 chemicals previously selected for long-term carcinogenicity testing. Utilizing the available toxicologic, genetic, and structural information on 30 chemicals previously selected for long-term carcinogenicity testing, we predict that 16 chemicals (53%) would induce some indication of carcinogenic activity in rodents; we further predic...

  12. Test Under Test

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    China’s national college entrance examination, regarded as a make-or-break test by many students, leaves much to be desired “We’ve bribed the exam supervisors, paying each one 20,000 yuan. They will make everything go smooth during the exams,” Li Feng, a teacher from No.2 High School in

  13. Functional Assays for Neurotoxicity Testing

    Science.gov (United States)

    Neurobehavioral and pathological evaluations of the nervous system are complementary components of basic research and toxicity testing of pharmaceutical and environmental chemicals. While neuropathological assessments provide insight as to cellular changes in neurons, behavioral ...

  14. Functional Assays for Neurotoxicity Testing*

    Science.gov (United States)

    Neurobehavioral and pathological evaluations of the nervous system are complementary components of basic research and toxicity testing of pharmaceutical and environmental chemicals. While neuropathological assessments provide insight as to cellular changes in neurons, behavioral ...

  15. Multimedia environmental chemical partitioning from molecular information

    International Nuclear Information System (INIS)

    The prospect of assessing the environmental distribution of chemicals directly from their molecular information was analyzed. Multimedia chemical partitioning of 455 chemicals, expressed in dimensionless compartmental mass ratios, was predicted by SimpleBox 3, a Level III Fugacity model, together with the propagation of reported uncertainty for key physicochemical and transport properties, and degradation rates. Chemicals, some registered in priority lists, were selected according to the availability of experimental property data to minimize the influence of predicted information in model development. Chemicals were emitted in air or water in a fixed geographical scenario representing the Netherlands and characterized by five compartments (air, water, sediments, soil and vegetation). Quantitative structure-fate relationship (QSFR) models to predict mass ratios in different compartments were developed with support vector regression algorithms. A set of molecular descriptors, including the molecular weight and 38 counts of molecular constituents were adopted to characterize the chemical space. Out of the 455 chemicals, 375 were used for training and testing the QSFR models, while 80 were excluded from model development and were used as an external validation set. Training and test chemicals were selected and the domain of applicability (DOA) of the QSFRs established by means of self-organizing maps according to structural similarity. Best results were obtained with QSFR models developed for chemicals belonging to either the class [C] and [C; O], or the class with at least one heteroatom different than oxygen in the structure. These two class-specific models, with respectively 146 and 229 chemicals, showed a predictive squared coefficient of q2 ≥ 0.90 both for air and water, which respectively dropped to q2 ∼ 0.70 and 0.40 for outlying chemicals. Prediction errors were of the same order of magnitude as the deviations associated to the uncertainty of the

  16. Preparation and characterization of Pd/Al{sub 2}O{sub 3} and Pd nanoparticles as standardized test material for chemical and biochemical studies of traffic related emissions

    Energy Technology Data Exchange (ETDEWEB)

    Leopold, K. [Technische Universitaet Muenchen, Arbeitsgruppe fuer Analytische Chemie, Lichtenbergstrasse 4, D-85747 Garching (Germany)], E-mail: kerstin.leopold@lrz.tum.de; Maier, M.; Schuster, M. [Technische Universitaet Muenchen, Arbeitsgruppe fuer Analytische Chemie, Lichtenbergstrasse 4, D-85747 Garching (Germany)

    2008-05-01

    Palladium model particles similar to those emitted from catalytic car exhaust converters were prepared and characterized with the intention of providing a standardized material for investigations of the chemical behavior and bioavailability of traffic related Pd emissions. Two series of Pd particles were prepared and characterized in detail: Pd nanoparticles (2-4 nm) dispersed on aluminum oxide particles of a diameter range between 0.1 to 30 {mu}m and 'Pd-only' nanoparticles of 5-10 nm in diameter. The Pd/{alpha}-Al{sub 2}O{sub 3} particles are very similar to particles emitted from catalytic converters by mechanical abrasion. The Pd-only particles are useful e.g. for exposure studies in which the presence of aluminum could lead to interferences when studying biological and biochemical effects. The sample preparation procedure of both series was optimized in order to achieve elemental particles with proper sizes and a narrow size distribution. The obtained particles were characterized by transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), selective area diffraction (SAD), laser granulometry and graphite furnace atomic absorption spectrometry (GFAAS) for the measurement of Pd concentrations.

  17. Chemical defences against herbivores

    DEFF Research Database (Denmark)

    Pavia, Henrik; Baumgartner, Finn; Cervin, Gunnar;

    2012-01-01

    This chapter focuses on the recent and emerging research involving chemical defences against herbivory in aquatic primary producers. It provides an overview of plant chemical defence theories and highlights recent research on aquatic primary producers addressing a number of aspects of these...

  18. Chemical warfare in freshwater

    NARCIS (Netherlands)

    Mulderij, Gabi

    2006-01-01

    Aquatic macrophytes can excrete chemical substances into their enviroment and these compounds may inhibit the growth of phytoplankton. This process is defined as allelopathy: one organism has effects on another via the excretion of a (mixture of) chemical substance(s). With laboratory and field expe

  19. Multiple chemical sensitivity

    DEFF Research Database (Denmark)

    Tran, Marie Thi Dao; Arendt-Nielsen, Lars; Kupers, Ron;

    2013-01-01

    BACKGROUND: Multiple Chemical Sensitivity (MCS) is a chronic condition characterized by recurrent, non-specific symptoms in response to chemically unrelated exposures in non-toxic concentrations. Although the pathophysiology of MCS remains unknown, central sensitization may be an important factor...

  20. Microorganisms and Chemical Pollution

    Science.gov (United States)

    Alexander, M.

    1973-01-01

    Discusses the importance of microorganisms in chemical pollution and pollution abatement. Selected chemical pollutants are chosen to illustrate that microorganisms synthesize hazardous substances from reasonably innocuous precursors, while others act as excellent environmental decontaminating agents by removing undesirable natural and synthetic…

  1. Chemical Product Design

    DEFF Research Database (Denmark)

    Gani, Rafiqul

    2004-01-01

    This paper highlights for a class of chemical products, the design process, their design with respect to the important issues, the need for appropriate tools and finally, lists some of the challenges and opportunities for the process systems engineering (PSE)/computer-aided process engineering...... (CAPE) community. The chemical products considered belong to the following types: chemical/biochemical/agrochemical products, coatings and solvents, food (nutraceuticals), HIM (household, industrial and institutional), personal care, pharmaceuticals and drugs. The challenges and opportunities are...... highlighted in terms of the needs for multi-level modeling with emphasis on property models that are suitable for computer-aided applications, flexible solution strategies that are able to solve a large range of chemical product design problems and finally, a systems chemical product design framework with the...

  2. Chemical recognition software

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, J.S.; Trahan, M.W.; Nelson, W.E.; Hargis, P.J. Jr.; Tisone, G.C.

    1994-12-01

    We have developed a capability to make real time concentration measurements of individual chemicals in a complex mixture using a multispectral laser remote sensing system. Our chemical recognition and analysis software consists of three parts: (1) a rigorous multivariate analysis package for quantitative concentration and uncertainty estimates, (2) a genetic optimizer which customizes and tailors the multivariate algorithm for a particular application, and (3) an intelligent neural net chemical filter which pre-selects from the chemical database to find the appropriate candidate chemicals for quantitative analyses by the multivariate algorithms, as well as providing a quick-look concentration estimate and consistency check. Detailed simulations using both laboratory fluorescence data and computer synthesized spectra indicate that our software can make accurate concentration estimates from complex multicomponent mixtures. even when the mixture is noisy and contaminated with unknowns.

  3. Chemical recognition software

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, J.S.; Trahan, M.W.; Nelson, W.E.; Hargis, P.H. Jr.; Tisone, G.C.

    1994-06-01

    We have developed a capability to make real time concentration measurements of individual chemicals in a complex mixture using a multispectral laser remote sensing system. Our chemical recognition and analysis software consists of three parts: (1) a rigorous multivariate analysis package for quantitative concentration and uncertainty estimates, (2) a genetic optimizer which customizes and tailors the multivariate algorithm for a particular application, and (3) an intelligent neural net chemical filter which pre-selects from the chemical database to find the appropriate candidate chemicals for quantitative analyses by the multivariate algorithms, as well as providing a quick-look concentration estimate and consistency check. Detailed simulations using both laboratory fluorescence data and computer synthesized spectra indicate that our software can make accurate concentration estimates from complex multicomponent mixtures, even when the mixture is noisy and contaminated with unknowns.

  4. Chemical evolution of galaxies

    CERN Document Server

    Matteucci, Francesca

    2012-01-01

    The term “chemical evolution of galaxies” refers to the evolution of abundances of chemical species in galaxies, which is due to nuclear processes occurring in stars and to gas flows into and out of galaxies. This book deals with the chemical evolution of galaxies of all morphological types (ellipticals, spirals and irregulars) and stresses the importance of the star formation histories in determining the properties of stellar populations in different galaxies. The topic is approached in a didactical and logical manner via galaxy evolution models which are compared with observational results obtained in the last two decades: The reader is given an introduction to the concept of chemical abundances and learns about the main stellar populations in our Galaxy as well as about the classification of galaxy types and their main observables. In the core of the book, the construction and solution of chemical evolution models are discussed in detail, followed by descriptions and interpretations of observations of ...

  5. Mechanical and chemical properties of sewage pipes

    OpenAIRE

    Ł. Wierzbicki; M. Szymiczek

    2012-01-01

    Purpose: The purpose of this paper was to evaluate the compatibility of the physico-chemical properties of sewage pipes with the requirements of PN – EN ISO 1401-01: Plastics piping systems for non-pressure underground drainage and sewerage. This article is based on a research carried out for the water supply company. The article presents the results of mechanical and chemical testing of four pipes of unplasticized polyvinyl chloride and one pipe of polypropylene. All the test pipes were app...

  6. Chemical process hazards analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The Office of Worker Health and Safety (EH-5) under the Assistant Secretary for the Environment, Safety and Health of the US Department (DOE) has published two handbooks for use by DOE contractors managing facilities and processes covered by the Occupational Safety and Health Administration (OSHA) Rule for Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119), herein referred to as the PSM Rule. The PSM Rule contains an integrated set of chemical process safety management elements designed to prevent chemical releases that can lead to catastrophic fires, explosions, or toxic exposures. The purpose of the two handbooks, ``Process Safety Management for Highly Hazardous Chemicals`` and ``Chemical Process Hazards Analysis,`` is to facilitate implementation of the provisions of the PSM Rule within the DOE. The purpose of this handbook ``Chemical Process Hazards Analysis,`` is to facilitate, within the DOE, the performance of chemical process hazards analyses (PrHAs) as required under the PSM Rule. It provides basic information for the performance of PrHAs, and should not be considered a complete resource on PrHA methods. Likewise, to determine if a facility is covered by the PSM rule, the reader should refer to the handbook, ``Process Safety Management for Highly Hazardous Chemicals`` (DOE- HDBK-1101-96). Promulgation of the PSM Rule has heightened the awareness of chemical safety management issues within the DOE. This handbook is intended for use by DOE facilities and processes covered by the PSM rule to facilitate contractor implementation of the PrHA element of the PSM Rule. However, contractors whose facilities and processes not covered by the PSM Rule may also use this handbook as a basis for conducting process hazards analyses as part of their good management practices. This handbook explains the minimum requirements for PrHAs outlined in the PSM Rule. Nowhere have requirements been added beyond what is specifically required by the rule.

  7. Coombs test

    Science.gov (United States)

    Direct antiglobulin test; Indirect antiglobulin test; Anemia - hemolytic ... No special preparation is necessary for this test. ... There are 2 types of the Coombs test: Direct Indirect The direct ... that are stuck to the surface of red blood cells. Many diseases ...

  8. Test Anxiety

    Science.gov (United States)

    ... Can I Help a Friend Who Cuts? Test Anxiety KidsHealth > For Teens > Test Anxiety Print A A ... with their concentration or performance. What Is Test Anxiety? Test anxiety is actually a type of performance ...

  9. Coombs test

    Science.gov (United States)

    Direct antiglobulin test; Indirect antiglobulin test ... No special preparation is necessary for this test. ... There are two types of the Coombs test: Direct Indirect The ... that are stuck to the surface of red blood cells. Many diseases ...

  10. Chemical properties of transactinides

    Science.gov (United States)

    Gäggeler, H. W.

    2005-09-01

    First investigations of chemical properties of bohrium (Z = 107) and hassium (Z = 108) showed an expected behaviour as ordinary members of groups 7 and 8 of the periodic table. Two attempts to study element 112 yielded some indication for a behaviour like a very volatile noble metal. However, a very recent experiment to confirm this preliminary observation failed. Two examples are described how chemical studies may help to support element discovery claims from purely physics experiments. The two examples are the discovery claims of the elements 112 and 115, respectively, where the progenies hassium and dubnium were chemically identified.

  11. Chemical properties of transactinides

    International Nuclear Information System (INIS)

    First investigations of chemical properties of bohrium (Z = 107) and hassium (Z = 108) showed an expected behaviour as ordinary members of groups 7 and 8 of the periodic table. Two attempts to study element 112 yielded some indication for a behaviour like a very volatile noble metal. However, a very recent experiment to confirm this preliminary observation failed. Two examples are described how chemical studies may help to support element discovery claims from purely physics experiments. The two examples are the discovery claims of the elements 112 and 115, respectively, where the progenies hassium and dubnium were chemically identified. (orig.)

  12. Chemical properties of transactinides

    Energy Technology Data Exchange (ETDEWEB)

    Gaeggeler, H.W. [Paul Scherrer Institut, Villigen (Switzerland); University of Bern, Bern (Switzerland)

    2005-09-01

    First investigations of chemical properties of bohrium (Z = 107) and hassium (Z = 108) showed an expected behaviour as ordinary members of groups 7 and 8 of the periodic table. Two attempts to study element 112 yielded some indication for a behaviour like a very volatile noble metal. However, a very recent experiment to confirm this preliminary observation failed. Two examples are described how chemical studies may help to support element discovery claims from purely physics experiments. The two examples are the discovery claims of the elements 112 and 115, respectively, where the progenies hassium and dubnium were chemically identified. (orig.)

  13. Effect of Thermal and Chemical Treatment on the Microstructural, Mechanical and Machining Performance of W319 Al-Si-Cu Cast Alloy Engine Blocks and Directionally Solidified Machinability Test Blocks

    Science.gov (United States)

    Szablewski, Daniel

    The research presented in this work is focused on making a link between casting microstructural, mechanical and machining properties for 319 Al-Si sand cast components. In order to achieve this, a unique Machinability Test Block (MTB) is designed to simulate the Nemak V6 Al-Si engine block solidification behavior. This MTB is then utilized to cast structures with in-situ nano-alumina particle master alloy additions that are Mg based, as well as independent in-situ Mg additions, and Sr additions to the MTB. The Universal Metallurgical Simulator and Analyzer (UMSA) Technology Platform is utilized for characterization of each cast structure at different Secondary Dendrite Arm Spacing (SDAS) levels. The rapid quench method and Jominy testing is used to assess the capability of the nano-alumina master alloy to modify the microstructure at different SDAS levels. Mechanical property assessment of the MTB is done at different SDAS levels on cast structures with master alloy additions described above. Weibull and Quality Index statistical analysis tools are then utilized to assess the mechanical properties. The MTB is also used to study single pass high speed face milling and bi-metallic cutting operations where the Al-Si hypoeutectic structure is combined with hypereutectoid Al-Si liners and cast iron cylinder liners. These studies are utilized to aid the implementation of Al-Si liners into the Nemak V6 engine block and bi-metallic cutting of the head decks. Machining behavior is also quantified for the investigated microstructures, and the Silicon Modification Level (SiML) is utilized for microstructural analysis as it relates to the machining behavior.

  14. Nondestructive testing method

    International Nuclear Information System (INIS)

    Nondestructive testing (NDT) is the use of physical and chemical methods for evaluating material integrity without impairing its intended usefulness or continuing service. Nondestructive tests are used by manufaturer's for the following reasons: 1) to ensure product reliability; 2) to prevent accidents and save human lives; 3) to aid in better product design; 4) to control manufacturing processes; and 5) to maintain a uniform quality level. Nondestructive testing is used extensively on power plants, oil and chemical refineries, offshore oil rigs and pipeline (NDT can even be conducted underwater), welds on tanks, boilers, pressure vessels and heat exchengers. NDT is now being used for testing concrete and composite materials. Because of the criticality of its application, NDT should be performed and the results evaluated by qualified personnel. There are five basic nondestructive examination methods: 1) liquid penetrant testing - method used for detecting surface flaws in materials. This method can be used for metallic and nonmetallic materials, portable and relatively inexpensive. 2) magnetic particle testing - method used to detect surface and subsurface flaws in ferromagnetic materials; 3) radiographic testing - method used to detect internal flaws and significant variation in material composition and thickness; 4) ultrasonic testing - method used to detect internal and external flaws in materials. This method uses ultrasonics to measure thickness of a material or to examine the internal structure for discontinuities. 5) eddy current testing - method used to detect surface and subsurface flaws in conductive materials. Not one nondestructive examination method can find all discontinuities in all of the materials capable of being tested. The most important consideration is for the specifier of the test to be familiar with the test method and its applicability to the type and geometry of the material and the flaws to be detected

  15. Chemical Data Access Tool

    Data.gov (United States)

    U.S. Environmental Protection Agency — This tool is intended to aid individuals interested in learning more about chemicals that are manufactured or imported into the United States. Health and safety...

  16. Ethics of Chemical Synthesis

    Directory of Open Access Journals (Sweden)

    Joachim Schummer

    2001-10-01

    Full Text Available Unlike other branches of science, the scientific products of synthetic chemistry are not only ideas but also new substances that change our material world, for the benefit or harm of living beings. This paper provides for the first time a systematical analysis of moral issues arising from chemical synthesis, based on concepts of responsibility and general morality. Topics include the questioning of moral neutrality of chemical synthesis as an end in itself, chemical weapons research, moral objections against improving material conditions of life by chemical means, and freedom of research. The paper aims at providing both a sound basis for moral judgements of chemistry in a public discourse and a framework for chemists to reflect on the moral relevance of their activity.

  17. Chemical allergy in humans

    DEFF Research Database (Denmark)

    Kimber, Ian; Basketter, David A; Thyssen, Jacob P;

    2014-01-01

    reaction; that is, allergic contact dermatitis or sensitization of the respiratory tract associated with occupational asthma. Studies in rodents have revealed that differential forms of allergic sensitization to chemicals are, in large part at least, a function of the selective development of discrete......Abstract There is considerable interest in the immunobiological processes through which the development of allergic sensitization to chemicals is initiated and orchestrated. One of the most intriguing issues is the basis for the elicitation by chemical sensitizers of different forms of allergic...... functional sub-populations of CD4(+) and CD8(+) T-lymphocytes. Evidence for a similar association of chemical allergy in humans with discrete T-lymphocyte populations is, however, limited. It is of some interest, therefore, that two recent articles from different teams of investigators have shed new light on...

  18. Chemical burn or reaction

    Science.gov (United States)

    ... and buy only as much as needed. Many household products are made of toxic chemicals. It is important ... follow label instructions, including any precautions. Never store household products in food or drink containers. Leave them in ...

  19. Biotechnology for renewable chemicals

    DEFF Research Database (Denmark)

    Borodina, Irina; Kildegaard, Kanchana Rueksomtawin; Jensen, Niels Bjerg;

    2014-01-01

    The majority of the industrial organic chemicals are derived from fossil sources. With the oil and gas resources becoming limiting, biotechnology offers a sustainable alternative for production ofchemicals from renewable feedstocks. Yeast is an attractive cell factory forsustainable production...

  20. Household Chemical Emergencies

    Science.gov (United States)

    ... and disposing of the material according to the manufacturer’s directions. It is critical to store household chemicals in places where children cannot access them. Remember that products such as aerosol cans of hair spray and deodorant, nail polish ...

  1. Chemical Physics Summer School

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-06-28

    The Gordon Research Conference (GRC) on Chemical Physics Summer School was held at Roger Williams University, Bristol, RI. Emphasis was placed on current unpublished research and discussion of the future target areas in this field.

  2. Fiber optic chemical sensors

    Science.gov (United States)

    Jung, Chuck C.; McCrae, David A.; Saaski, Elric W.

    1998-09-01

    This paper provides a broad overview of the field of fiber optic chemical sensors. Several different types of fiber optic sensors and probes are described, and references are cited for each category discussed.

  3. Chemical evolution and life

    Directory of Open Access Journals (Sweden)

    Malaterre Christophe

    2015-01-01

    Full Text Available In research on the origins of life, the concept of “chemical evolution” aims at explaining the transition from non-living matter to living matter. There is however strong disagreement when it comes to defining this concept more precisely, and in particular with reference to a chemical form of Darwinian evolution: for some, chemical evolution is nothing but Darwinian evolution applied to chemical systems before life appeared; yet, for others, it is the type of evolution that happened before natural selection took place, the latter being the birthmark of living systems. In this contribution, I review the arguments defended by each side and show how both views presuppose a dichotomous definition of “life”.

  4. Nonlinear Chemical Dynamics and Synchronization

    Science.gov (United States)

    Li, Ning

    Alan Turing's work on morphogenesis, more than half a century ago, continues to motivate and inspire theoretical and experimental biologists even today. That said, there are very few experimental systems for which Turing's theory is applicable. In this thesis we present an experimental reaction-diffusion system ideally suited for testing Turing's ideas in synthetic "cells" consisting of microfluidically produced surfactant-stabilized emulsions in which droplets containing the Belousov-Zhabotinsky (BZ) oscillatory chemical reactants are dispersed in oil. The BZ reaction has become the prototype of nonlinear dynamics in chemistry and a preferred system for exploring the behavior of coupled nonlinear oscillators. Our system consists of a surfactant stabilized monodisperse emulsion of drops of aqueous BZ solution dispersed in a continuous phase of oil. In contrast to biology, here the chemistry is understood, rate constants are measured and interdrop coupling is purely diffusive. We explore a large set of parameters through control of rate constants, drop size, spacing, and spatial arrangement of the drops in lines and rings in one-dimension (1D) and hexagonal arrays in two-dimensions (2D). The Turing model is regarded as a metaphor for morphogenesis in biology but not for prediction. Here, we develop a quantitative and falsifiable reaction-diffusion model that we experimentally test with synthetic cells. We quantitatively establish the extent to which the Turing model in 1D describes both stationary pattern formation and temporal synchronization of chemical oscillators via reaction-diffusion and in 2D demonstrate that chemical morphogenesis drives physical differentiation in synthetic cells.

  5. [Cutaneous absorption of chemicals].

    Science.gov (United States)

    Schröder, J

    1986-09-01

    Chemicals have become indispensible for the maintenance of health in animals and man. The route of administration of each medicament is decided by factors such as site of desired action, chemistry of the active ingredient, age and species of the patient, and frequency of administration (or desired duration of activity). In situations where the oral and hypodermic routes, which are used most frequently, are inadequate or unsatisfactory, dermal application can provide a valuable alternative method to achieve systemic activity. Examples of formulations currently available for dermal application contain diverse chemicals and are intended for a variety of purposes, such as crufomate against cattle grubs, fenthion against cattle lice, levamisole against gastrointestinal nematodes, nitroglycerine for angina pectoris, and scopolamine for motion sickness. The skin acts as a barrier to penetration by chemicals and micro-organisms by virtue of its morphology and chemical composition. Chemicals which do penetrate, do not necessarily pass through the appendages (hair follicles and gland ducts), but mostly penetrate through the interjacent epidermis, either through the cells, or via the intracellular spaces. These spaces have recently been shown by electron microscopy to be filled by an amorphous substance which exudes on the skin surface in convex ridges. This substance has a lipid nature, but is not hydrophobic as is often accepted. For a chemical to be able to penetrate the skin, it must be partially water and lipid soluble, polar, and weakly ionizing. A variety of factors can possibly affect the permeability of skin for a chemical. These include species differences in morphology (skin thickness, tightness of intercellular junctions, density of hair follicles and other appendages), biochemistry, and physiology; seasonal and climatic variations; and differences between breeds and genders. Species differences in skin permeability are largely unpredictable and inconsistent. An

  6. Computational Systems Chemical Biology

    OpenAIRE

    Oprea, Tudor I.; May, Elebeoba E.; Leitão, Andrei; Tropsha, Alexander

    2011-01-01

    There is a critical need for improving the level of chemistry awareness in systems biology. The data and information related to modulation of genes and proteins by small molecules continue to accumulate at the same time as simulation tools in systems biology and whole body physiologically-based pharmacokinetics (PBPK) continue to evolve. We called this emerging area at the interface between chemical biology and systems biology systems chemical biology, SCB (Oprea et al., 2007).

  7. Chemical functionalization of graphene

    OpenAIRE

    Boukhvalov, D. W.; Katsnelson, M I

    2008-01-01

    Experimental and theoretical results on chemical functionalization of graphene are reviewed. Using hydrogenated graphene as a model system, general principles of the chemical functionalization are formulated and discussed. It is shown that, as a rule, 100% coverage of graphene by complex functional groups (in contrast with hydrogen and fluorine) is unreachable. A possible destruction of graphene nanoribbons by fluorine is considered. The functionalization of infinite graphene and graphene nan...

  8. Chemical effects of radiation

    International Nuclear Information System (INIS)

    Ionizing radiations initiate chemical changes in materials because of the high energy of their quanta. In water, highly reactive free radicals are produced which can initiate secondary changes of solutes, and in chemical of biological molecules in contact with the water. Free radicals can also be directly produced in irradiated medical products. Their fate can be identified and the molecular basis of radiation inactivation clarified. Methods have now been developed to protect and minimise such radiation damage. (author)

  9. Polymers for chemical sensing

    OpenAIRE

    Persaud, Krishna C.

    2005-01-01

    Chemical sensors play an increasingly important role in monitoring the environment we live in, providing information on industrial manufacturing processes and their emissions, quality control of foods and beverages, and a host of other applications. Electrically conductive plastics are being developed for many useful applications. Improvement in understanding of the physical and chemical mechanisms by which electrical conduction occurs in these materials is now leading to a new generation of ...

  10. Chemical warfare in freshwater

    OpenAIRE

    Mulderij, Gabi

    2006-01-01

    Aquatic macrophytes can excrete chemical substances into their enviroment and these compounds may inhibit the growth of phytoplankton. This process is defined as allelopathy: one organism has effects on another via the excretion of a (mixture of) chemical substance(s). With laboratory and field experiments we studied the allelopathic effects of the aquatic macrophytes, Chara and Stratiotes. Laboratory experiments showed that the aquatic macrophytes had allelopathic effects. Phytoplankton grow...

  11. Interactive Chemical Reactivity Exploration

    OpenAIRE

    Haag, Moritz P.; Vaucher, Alain C.; Bosson, Mael; Redon, Stephane; Reiher, Markus

    2014-01-01

    Elucidating chemical reactivity in complex molecular assemblies of a few hundred atoms is, despite the remarkable progress in quantum chemistry, still a major challenge. Black-box search methods to find intermediates and transition-state structures might fail in such situations because of the high-dimensionality of the potential energy surface. Here, we propose the concept of interactive chemical reactivity exploration to effectively introduce the chemist's intuition into the search process. ...

  12. The precautionary principle and chemicals regulation

    DEFF Research Database (Denmark)

    Løkke, Søren

    2006-01-01

    Background, Aim and Scope The paper investigates the development of the institutional basis of the present modes of chemicals regulation and management, with special attention to interrelations with the precautionary principle. Main Features: The paper elucidates on how the precautionary principle...... has been shaped in relation to chemicals regulation and management since Carson's Silent Spring (years before the principle was confirmed as a policy-principle in German and European legislation. Furthermore, it is examined how the precautionary principle interacted with the development of the present...... chemicals regulatory regime, in a complex interplay within the OECD and Member Countries. The present modes of precaution in the new EU chemical legislation – REACH – are investigated with respect to the precautionary principle, and tested against two contemporary problems; brominated flame retardants and...

  13. Possible interrelations among chemical freezeout conditions

    CERN Document Server

    Tawfik, A; Habashy, D M; Mohamed, M T; Abbas, E

    2016-01-01

    At thermal equilibrium, different chemical freezeout conditions have been proposed so far. They have an ultimate aim of proposing a universal description for the chemical freezeout parameters ($T_{ch}$ and $\\mu_b$), which are to be extracted from the statistical fitting of different particle ratios measured at various collision energies with calculations from thermal models. A systematic comparison between these conditions is presented. The physical meaning of each of them and their sensitivity to the hadron mass cuts are discussed. Based on availability, some of them are compared with recent lattice calculations. We found that most of these conditions are thermodynamically equivalent, especially at small baryon chemical potential. We propose that further crucial consistency tests should be performed at low energies. The fireball thermodynamics is another way of guessing conditions describing the chemical freezeout parameters extracted from high-energy experiments. We endorse the possibility that the various ...

  14. Optimization of a chemical identification algorithm

    Science.gov (United States)

    Chyba, Thomas H.; Fisk, Brian; Gunning, Christin; Farley, Kevin; Polizzi, Amber; Baughman, David; Simpson, Steven; Slamani, Mohamed-Adel; Almassy, Robert; Da Re, Ryan; Li, Eunice; MacDonald, Steve; Slamani, Ahmed; Mitchell, Scott A.; Pendell-Jones, Jay; Reed, Timothy L.; Emge, Darren

    2010-04-01

    A procedure to evaluate and optimize the performance of a chemical identification algorithm is presented. The Joint Contaminated Surface Detector (JCSD) employs Raman spectroscopy to detect and identify surface chemical contamination. JCSD measurements of chemical warfare agents, simulants, toxic industrial chemicals, interferents and bare surface backgrounds were made in the laboratory and under realistic field conditions. A test data suite, developed from these measurements, is used to benchmark algorithm performance throughout the improvement process. In any one measurement, one of many possible targets can be present along with interferents and surfaces. The detection results are expressed as a 2-category classification problem so that Receiver Operating Characteristic (ROC) techniques can be applied. The limitations of applying this framework to chemical detection problems are discussed along with means to mitigate them. Algorithmic performance is optimized globally using robust Design of Experiments and Taguchi techniques. These methods require figures of merit to trade off between false alarms and detection probability. Several figures of merit, including the Matthews Correlation Coefficient and the Taguchi Signal-to-Noise Ratio are compared. Following the optimization of global parameters which govern the algorithm behavior across all target chemicals, ROC techniques are employed to optimize chemical-specific parameters to further improve performance.

  15. Environmental/chemical thesaurus

    Energy Technology Data Exchange (ETDEWEB)

    Shriner, C.R.; Dailey, N.S.; Jordan, A.C.; Miller, K.C.; Owens, E.T.; Rickert, L.W.

    1978-06-01

    The Environmental/Chemical Thesaurus approaches scientific language control problems from a multidisciplinary view. The Environmental/Biomedical Terminology Index (EBTI) was used as a base for the present thesaurus. The Environmental/Chemical Thesaurus, funded by the Environmental Protection Agency, used as its source of new terms those major terms found in 13 Environmental Protection Agency data bases. The scope of this thesaurus includes not only environmental and biomedical sciences, but also the physical sciences with emphasis placed on chemistry. Specific chemical compounds are not included; only classes of chemicals are given. To adhere to this level of classification, drugs and pesticides are identified by class rather than by specific chemical name. An attempt was also made to expand the areas of sociology and economics. Terminology dealing with law, demography, and geography was expanded. Proper names of languages and races were excluded. Geographic terms were expanded to include proper names for oceans, continents, major lakes, rivers, and islands. Political divisions were added to allow for proper names of countries and states. With such a broad scope, terminology for specific sciences does not provide for indexing to the lowest levels in plant, animal, or chemical classifications.

  16. Environmental/chemical thesaurus

    International Nuclear Information System (INIS)

    The Environmental/Chemical Thesaurus approaches scientific language control problems from a multidisciplinary view. The Environmental/Biomedical Terminology Index (EBTI) was used as a base for the present thesaurus. The Environmental/Chemical Thesaurus, funded by the Environmental Protection Agency, used as its source of new terms those major terms found in 13 Environmental Protection Agency data bases. The scope of this thesaurus includes not only environmental and biomedical sciences, but also the physical sciences with emphasis placed on chemistry. Specific chemical compounds are not included; only classes of chemicals are given. To adhere to this level of classification, drugs and pesticides are identified by class rather than by specific chemical name. An attempt was also made to expand the areas of sociology and economics. Terminology dealing with law, demography, and geography was expanded. Proper names of languages and races were excluded. Geographic terms were expanded to include proper names for oceans, continents, major lakes, rivers, and islands. Political divisions were added to allow for proper names of countries and states. With such a broad scope, terminology for specific sciences does not provide for indexing to the lowest levels in plant, animal, or chemical classifications

  17. "The Chemicals Project": Connecting General Chemistry to Students' Lives

    Science.gov (United States)

    Stout, Roland

    2000-10-01

    "The Chemicals Project" described here strives to bring freshman chemistry alive for students by emphasizing its connection to the real world and to their own lives and experiences. Its major assignments deal with chemical phobias, recognizing the chemicals found in everyday life and chemical hazards (using Material Data Safety Sheets). The project is described in a cooperative learning format, employs portfolio grading, and includes a significant writing component. Ways of linking this project with the course lecture and student evaluations of the project are described. The bottom line: pre- and post-testing shows that it works. The Chemicals Project brings chemistry alive for students.

  18. Vendor System Vulnerability Testing Test Plan

    Energy Technology Data Exchange (ETDEWEB)

    James R. Davidson

    2005-01-01

    The Idaho National Laboratory (INL) prepared this generic test plan to provide clients (vendors, end users, program sponsors, etc.) with a sense of the scope and depth of vulnerability testing performed at the INL’s Supervisory Control and Data Acquisition (SCADA) Test Bed and to serve as an example of such a plan. Although this test plan specifically addresses vulnerability testing of systems applied to the energy sector (electric/power transmission and distribution and oil and gas systems), it is generic enough to be applied to control systems used in other critical infrastructures such as the transportation sector, water/waste water sector, or hazardous chemical production facilities. The SCADA Test Bed is established at the INL as a testing environment to evaluate the security vulnerabilities of SCADA systems, energy management systems (EMS), and distributed control systems. It now supports multiple programs sponsored by the U.S. Department of Energy, the U.S. Department of Homeland Security, other government agencies, and private sector clients. This particular test plan applies to testing conducted on a SCADA/EMS provided by a vendor. Before performing detailed vulnerability testing of a SCADA/EMS, an as delivered baseline examination of the system is conducted, to establish a starting point for all-subsequent testing. The series of baseline tests document factory delivered defaults, system configuration, and potential configuration changes to aid in the development of a security plan for in depth vulnerability testing. The baseline test document is provided to the System Provider,a who evaluates the baseline report and provides recommendations to the system configuration to enhance the security profile of the baseline system. Vulnerability testing is then conducted at the SCADA Test Bed, which provides an in-depth security analysis of the Vendor’s system.b a. The term System Provider replaces the name of the company/organization providing the system

  19. Cylinder overpack phenolic foam shock testing

    International Nuclear Information System (INIS)

    The mechanical shock absorbability of phenolic foam made from reagent grade chemicals, specified in US Atomic Energy Commission (Department of Energy) Material and Equipment Specification SP-9 is compared to that of foam made from substituted commercial grade chemicals. The testing reported herein compares mechanical properties of the foams. The test results demonstrate the equivalence in the shock absorbability of the two foam types

  20. Application of Physical Testing and Chemical Analysis Technology in the Production of Hot Galvanized Steel Sheet Used for Car%理化检验技术在汽车外用热镀锌钢板生产中的应用

    Institute of Scientific and Technical Information of China (English)

    张全成; 谢珺; 黄神

    2012-01-01

    Defects would be play important influence on the quality of hot galvanized steel sheet used for cars. A method was shared to analyze the defect reason by using electronic scanning technology and micro characterization of the chemical composition in defects. Application methods of physical testing and chemical analysis technology in the production of hot galvanized steel sheet used for car were summarized. Results showed that the defects were generated between galvannealing furnace and skin level section, and the chemical composition analysis determined that the black spots were rubber material. Through investigation on the line, it was found that only a wringer roll on the quench tank was made of rubber material between the galvannealing furnace and skin level section. Finally the defects were removed by changing the roll, which ensured the normal production.%表面缺陷对于汽车外用热镀锌钢板的成材率具有很大影响,以钢板表面的典型缺陷分析方法为例,通过显微组织观察和微区成分分析,判断了缺陷的成因,总结了理化检验技术在汽车外用热镀锌合金化钢板生产中的应用方法。结果表明:缺陷发生的位置在镀锌工位之后、平整工位之前,设备材料属于有机组成;通过现场调研发现缺陷设备为一组挤干辊,通过替换完好的挤干辊保证了生产的顺利进行。