On Rational Design of Double Hull Tanker Structures against Collision

DEFF Research Database (Denmark)

Paik, Jeom Kee; Chung, Jang Young; Choe, Ich Hung

1999-01-01

This paper is a summary of recent research and development in areas related to the design technology for double hull tanker structures against low energy collision, jointly undertaken by the Hyundai Heavy Industries, the American Bureau of Shipping, the Technical University of Denmark and the Pusan...... in the present study were (i) developing a framework for the collision design procedure for double hull tanker structures, (ii) experimental investigation of the structural crashworthiness of the collided vessels in collision or stranding, using double skinned structural models, (iii) validation of the special...... investigation of the energy absorption capability characteristics of a collided double hull VLCC side structure in collision, and (vi) development of a new modified Minorsky method for double hull tanker side structures. The tools developed and the results and insights obtained by the present study should...

Aerodynamic Efficiency Analysis on Modified Drag Generator of Tanker-Ship Using Symmetrical Airfoil

Science.gov (United States)

Moranova, Starida; Rahmat Hadiyatul A., S. T.; Indra Permana S., S. T.

2018-04-01

Time reduction of tanker ship spent in the sea should be applied for solving problems occured in oil and gas distribution, such as the unpunctuality of the distribution and oil spilling. The aerodynamic design for some parts that considered as drag generators is presumed to be one of the solution, utilizing our demand of the increasing speed. This paper suggests two examples of the more-aerodynamic design of a part in the tanker that is considered a drag generator, and reports the value of drag generated from the basic and the suggested aerodynamic designs. The new designs are made by adding the NACA airfoil to the cross section of the drag generator. The scenario is assumed with a 39 km/hour speed of tanker, neglecting the hydrodynamic effects occured in the tanker by cutting it at the waterline which separated the drag between air and water. The results of produced drag in each design are calculated by Computational Fluid Dynamic method.

Proteolysis produced within biofilms of bacterial isolates from raw milk tankers.

Science.gov (United States)

Teh, Koon Hoong; Flint, Steve; Palmer, Jon; Andrewes, Paul; Bremer, Phil; Lindsay, Denise

2012-06-15

In this study, six bacterial isolates that produced thermo-resistant enzymes isolated from the internal surfaces of raw milk tankers were evaluated for their ability to produce proteolysis within either single culture biofilms or co-culture biofilms. Biofilms were formed in an in vitro model system that simulated the upper internal surface of a raw milk tanker during a typical summer's day of milk collection in New Zealand. The bacterial isolates were further evaluated for their ability to form biofilms at 25, 30 and 37°C. Mutual and competitive effects were observed in some of the co-culture biofilms, with all isolates being able to form biofilms in either single culture or co-culture at the three temperatures. The proteolysis was also evaluated in both biofilms and corresponding planktonic cultures. The proteolysis per cell decreased as the temperature of incubation (20-37°C) increased. Furthermore, mutualistic interactions in terms of proteolysis were observed when cultures were grown as co-culture biofilms. This is the first study to show that proteolytic enzymes can be produced in biofilms on the internal surfaces of raw milk tankers. This has important implications for the cleaning and the temperature control of raw milk transport tankers. Copyright © 2012 Elsevier B.V. All rights reserved.

Safety at sea: oil spills, the tanker business and international regulations

Energy Technology Data Exchange (ETDEWEB)

Golomer, Olivier

1994-02-01

The tanker industry has been assailed in recent years with regulations, inspections, and many, many criticisms. The official objective of these pressures - the preservation of the environment from oil spills and oil contamination - is praiseworthy. However, many of these measures have proved inefficient or have led to ludicrous situations due in large part to them being targeted on crisis situations. Instead of emergency regulations spurred by sporadic disasters, both the tanker industry and protection of the environment need a set of economic instruments relying on a systematic assessment of risks. This paper focuses on these issues in the Very Large Crude Carrier segment of the tanker business. We start with a description of the industry and the actors in place, and then review the measures and policies adopted so far and their influence on the industry, especially in relation to freight rates. By analogy with other industries, a comprehensive approach to environmental hazards is then proposed. (Author)

Optimum use of air tankers in initial attack: selection, basing, and transfer rules

Science.gov (United States)

Francis E. Greulich; William G. O' Regan

1982-01-01

Fire managers face two interrelated problems in deciding the most efficient use of air tankers: where best to base them, and how best to reallocate them each day in anticipation of fire occurrence. A computerized model based on a mixed integer linear program can help in assigning air tankers throughout the fire season. The model was tested using information from...

Transporting US oil imports: The impact of oil spill legislation on the tanker market

International Nuclear Information System (INIS)

Rowland, P.J.

1992-05-01

The Oil Pollution Act of 1990 (''OPA'') and an even more problematic array of State pollution laws have raised the cost, and risk, of carrying oil into and out of the US. This report, prepared under contract to the US Department of energy's Office of Domestic and International Policy, examines the impact of Federal and State oil spill legislation on the tanker market. It reviews the role of marine transportation in US oil supply, explores the OPA and State oil spill laws, studies reactions to OPA in the tanker and tank barge industries and in related industries such as insurance and ship finance, and finally, discusses the likely developments in the years ahead. US waterborne oil imports amounted to 6.5 million B/D in 1991, three-quarters of which was crude oil. Imports will rise by almost 3 million B/D by 2000 according to US Department of energy forecasts, with most of the crude oil growth after 1995. Tanker demand will grow even faster: most of the US imports and the increased traffic to other world consuming regions will be on long-haul trades. Both the number of US port calls by tankers and the volume of offshore lightering will grow. Every aspect of the tanker industry's behavior is affected by OPA and a variety of State pollution laws

Transporting US oil imports: The impact of oil spill legislation on the tanker market

Energy Technology Data Exchange (ETDEWEB)

Rowland, P.J. (Rowland (P.) Associates (United States))

1992-05-01

The Oil Pollution Act of 1990 ( OPA'') and an even more problematic array of State pollution laws have raised the cost, and risk, of carrying oil into and out of the US. This report, prepared under contract to the US Department of energy's Office of Domestic and International Policy, examines the impact of Federal and State oil spill legislation on the tanker market. It reviews the role of marine transportation in US oil supply, explores the OPA and State oil spill laws, studies reactions to OPA in the tanker and tank barge industries and in related industries such as insurance and ship finance, and finally, discusses the likely developments in the years ahead. US waterborne oil imports amounted to 6.5 million B/D in 1991, three-quarters of which was crude oil. Imports will rise by almost 3 million B/D by 2000 according to US Department of energy forecasts, with most of the crude oil growth after 1995. Tanker demand will grow even faster: most of the US imports and the increased traffic to other world consuming regions will be on long-haul trades. Both the number of US port calls by tankers and the volume of offshore lightering will grow. Every aspect of the tanker industry's behavior is affected by OPA and a variety of State pollution laws.

Trends in oil spills from tanker ships 1995-2004

International Nuclear Information System (INIS)

Huijer, K.

2005-01-01

The trends in oil spills around the world over from 1995 to 2004 were examined and analyzed for possible influences on spill volumes and frequencies for incidents of 3 spill size classes. The International Tanker Owners Pollution Federation (ITOPF) has maintained a database since 1974 of all oil spills from tankers, combined carriers and barges. The number of oil spills has decreased significantly in the last 30 years despite a steady increase in maritime oil trade since the 1980s. The recent trends were identified by causes, locations, oil type, and shipping legislation. The causes include ship loading/discharging, bunkering, collisions, groundings, hull failures and fires. The types of oil spilt include bunker, crude, cargo fuel, white product and some unknowns. It was concluded that the decline in oil spills is due to a range of initiatives taken by governments and the shipping industry rather than any one factor. Some notable influences towards reduced number of spills include: the international convention for the prevention of pollution from ships of 1972, as modified by the Protocol of 1978; the international convention for the safety of life at sea of 1974; and the Oil Pollution Act of 1990. Results of investigations into the causes of spills serve the purpose of informing the international process to further prevent and reduce marine oil pollution due to tankers. 7 refs., 5 tabs., 12 figs

Fuel-cell-propelled submarine-tanker-system study

International Nuclear Information System (INIS)

Court, K.E.; Kumm, W.H.; O'Callaghan, J.E.

1982-06-01

This report provides a systems analysis of a commercial Arctic Ocean submarine tanker system to carry fossil energy to markets. The submarine is to be propelled by a modular Phosphoric Acid Fuel Cell system. The power level is 20 Megawatts. The DOE developed electric utility type fuel cell will be fueled with methanol. Oxidant will be provided from a liquid oxygen tank carried onboard. The twin screw submarine tanker design is sized at 165,000 deadweight tons and the study includes costs and an economic analysis of the transport system of 6 ships. The route will be under the polar icecap from a loading terminal located off Prudhoe Bay, Alaska to a transshipment facility postulated to be in a Norwegian fjord. The system throughput of the gas-fed methanol cargo will be 450,000 barrels per day. The total delivered cost of the methanol including well head purchase price of natural gas, methanol production, and shipping would be $25/bbl from Alaska to the US East Coast. Of this, the shipping cost is $6.80/bbl. All costs in 1981 dollars

Operability Guidelines For Product Tanker In Heavy Weather In The Adriatic Sea

Directory of Open Access Journals (Sweden)

Mudronja Luka

2014-06-01

Full Text Available This paper presents operability guidelines for seafarers on a product tanker which navigates in the Adriatic Sea during heavy weather. Tanker route starts from the Otranto strait in the south to the island Krk in the north of Adriatic Sea. Heavy weather is caused by south wind called jugo (blowing from E-SE to SS-E, sirocco family. Operability guidelines are given based on an operability criteria platform for presenting ship seakeeping characteristics. Operability criteria considered in this paper are propeller emergence, deck wetness and bow acceleration of a product tanker. Limiting values of mentioned criteria determine sustainable speed. Heavy weather is described by extreme sea state of 7.5 m wave height. Wave spectrum used in this paper is Tabain spectrum which is developed specifically for Adriatic Sea. Seafarer's approach of decisions making in extreme weather is also shown and servers as a guideline for further research of the authors.

AN ANALYSIS OF RISK EVENTS IN THE OIL-TANKER MAINTENANCE BUSINESS

Directory of Open Access Journals (Sweden)

Roque Rabechini Junior

2012-12-01

Full Text Available This work presents the results of an investigation into risk events and their respective causes, carried out in ship maintenance undertakings in the logistical sector of the Brazilian oil industry. Its theoretical, conceptual positioning lies in those aspects related to risk management of the undertakings as instruments of support in decision making by executives in the tanker-maintenance business. The case-study method was used as an alternative methodology with a qualitative approach of an exploratory nature and, for the presentation of data, a descriptive format was chosen. Through the analysis of 75 risk events in projects of tanker docking it was possible to extract eight of the greatest relevance. The risk analysis facilitated the identification of actions aimed at their mitigation. As a conclusion it was possible to propose a risk-framework model in four categories, HSE (health, safety and the environment, technicians, externalities and management, designed to provide tanker-docking business executives and administrators, with evidence of actions to assist in their decision-making processes. Finally, the authors identified proposals for further study as well as showing the principal limitations of the study.

Design challenges for large Arctic crude oil tanker

International Nuclear Information System (INIS)

Iyerusalimskiy, A.; Noble, P.

2008-01-01

The Vasily Dinkov vessel was delivered by Samsung Heavy Industries shipyard to Russian ship-owner Sovcomflot. It is the largest icebreaking tanker ever built. The vessel was designed and constructed to transport crude oil from the Varandey offshore terminal in the southeastern Barents Sea to a transshipment location near Murmansk, Russia. The vessel is under long-term charter for Naryanmarneftegas, a joint venture of Lukoil and ConocoPhillips. The new ship was constructed strictly to the requirements, specification, and concept design provided by the charterer. The Varandey oil transportation concept and the vessel operational profile resulted in some conflicting requirements, compromising technical solutions, and assumptions yet to be proven in operation. This paper described the design challenges and selected approach to solve the solution to the tanker key design elements. These included the ice transit and other Arctic environmental challenges; open water performance issues; and icebreaking hull structure design challenges associated with modern shipbuilding technology standards and cost efficiency. The principle characteristics of the Vasily Dinkov were first presented and the Varandey crude oil transportation system was also described. Several features have made the Vasily Dinkov the most advanced icebreaking tanker to date, such as the icebreaking concept which has expanded the capability of both traditional icebreaking ships fitted with the icebreaker bow and double acting ships intended to operate astern only in the ice; the largest azimuthal twin screw propulsion plant for the Arctic with highest ice torque capacity ever specified for cargo vessel; and the first customized, automated, asymmetric steering control system designed to improve open water maneuverability and steering stability of podded vessels. It was concluded that the transportation system, the overall vessel concept and many of the vessel features require validation based on operational

Ultimate strength performance of tankers associated with industry corrosion addition practices

Directory of Open Access Journals (Sweden)

Kim Do Kyun

2014-09-01

Full Text Available In the ship and offshore structure design, age-related problems such as corrosion damage, local denting, and fatigue damage are important factors to be considered in building a reliable structure as they have a significant influence on the residual structural capacity. In shipping, corrosion addition methods are widely adopted in structural design to prevent structural capacity degradation. The present study focuses on the historical trend of corrosion addition rules for ship structural design and investigates their effects on the ultimate strength performance such as hull girder and stiffened panel of double hull oil tankers. Three types of rules based on corrosion addition models, namely historic corrosion rules (pre-CSR, Common Structural Rules (CSR, and harmonised Common Structural Rules (CSRH are considered and compared with two other corrosion models namely UGS model, suggested by the Union of Greek Shipowners (UGS, and Time-Dependent Corrosion Wastage Model (TDCWM. To identify the general trend in the effects of corrosion damage on the ultimate longitudinal strength performance, the corrosion addition rules are applied to four representative sizes of double hull oil tankers namely Panamax, Aframax, Suezmax, and VLCC. The results are helpful in understanding the trend of corrosion additions for tanker structures

Ultimate strength performance of tankers associated with industry corrosion addition practices

Directory of Open Access Journals (Sweden)

Do Kyun Kim

2014-09-01

Full Text Available In the ship and offshore structure design, age-related problems such as corrosion damage, local denting, and fatigue damage are important factors to be considered in building a reliable structure as they have a significant influence on the residual structural capacity. In shipping, corrosion addition methods are widely adopted in structural design to prevent structural capacity degradation. The present study focuses on the historical trend of corrosion addition rules for ship structural design and investigates their effects on the ultimate strength performance such as hull girder and stiffened panel of double hull oil tankers. Three types of rules based on corrosion addition models, namely historic corrosion rules (pre-CSR, Common Structural Rules (CSR, and harmonised Common Structural Rules (CSRH are considered and compared with two other corrosion models namely UGS model, suggested by the Union of Greek Shipowners (UGS, and Time-Dependent Corrosion Wastage Model (TDCWM. To identify the general trend in the effects of corrosion damage on the ultimate longitudinal strength performance, the corrosion addition rules are applied to four representative sizes of double hull oil tankers namely Panamax, Aframax, Suezmax, and VLCC. The results are helpful in understanding the trend of corrosion additions for tanker structures.

Transporting US oil imports: The impact of oil spill legislation on the tanker market. Draft final report

Energy Technology Data Exchange (ETDEWEB)

Rowland, P.J. [Rowland (P.) Associates (United States)

1992-05-01

The Oil Pollution Act of 1990 (``OPA``) and an even more problematic array of State pollution laws have raised the cost, and risk, of carrying oil into and out of the US. This report, prepared under contract to the US Department of energy`s Office of Domestic and International Policy, examines the impact of Federal and State oil spill legislation on the tanker market. It reviews the role of marine transportation in US oil supply, explores the OPA and State oil spill laws, studies reactions to OPA in the tanker and tank barge industries and in related industries such as insurance and ship finance, and finally, discusses the likely developments in the years ahead. US waterborne oil imports amounted to 6.5 million B/D in 1991, three-quarters of which was crude oil. Imports will rise by almost 3 million B/D by 2000 according to US Department of energy forecasts, with most of the crude oil growth after 1995. Tanker demand will grow even faster: most of the US imports and the increased traffic to other world consuming regions will be on long-haul trades. Both the number of US port calls by tankers and the volume of offshore lightering will grow. Every aspect of the tanker industry`s behavior is affected by OPA and a variety of State pollution laws.

33 CFR 165.1709 - Security Zones: Liquefied Natural Gas Tanker Transits and Operations at Phillips Petroleum LNG...

Science.gov (United States)

2010-07-01

... Gas Tanker Transits and Operations at Phillips Petroleum LNG Pier, Cook Inlet, AK. 165.1709 Section...: Liquefied Natural Gas Tanker Transits and Operations at Phillips Petroleum LNG Pier, Cook Inlet, AK. (a... and outbound transits through Cook Inlet, Alaska between the Phillips Petroleum LNG Pier, 60°40′43″ N...

Spatial analysis of private tanker water markets in Jordan: Using a hydroeconomic multi-agent model to simulate non-observed water transfers

Science.gov (United States)

Klassert, Christian; Yoon, Jim; Gawel, Erik; Sigel, Katja; Klauer, Bernd; Talozi, Samer; Lachaut, Thibaut; Selby, Philip; Knox, Stephen; Gorelick, Steven; Tilmant, Amaury; Harou, Julien; Mustafa, Daanish; Medellin-Azuara, Josue; Rajsekhar, Deepthi; Avisse, Nicolas; Zhang, Hua

2017-04-01

The country of Jordan is characterized by severe water scarcity and deficient public water supply networks. To address these issues, Jordan's water sector authorities have adopted a water rationing scheme implemented by interrupting piped water supply for several days per week. As in many arid countries around the world, this has led to the emergence of private markets of small-scale providers, delivering water via tanker trucks. On the one hand, these markets play a crucial role in meeting residential and commercial water demands by balancing the shortcomings of the public supply system. On the other hand, providers partially rely on illegal abstractions from rural ground and surface water sources, thereby circumventing regulatory efforts to conserve these resources. Private tanker water markets, therefore, provide a substantial contribution to consumer welfare while jeopardizing freshwater resource sustainability. Thus, a better understanding of these markets is of great importance for the formulation of policy interventions pursuing freshwater sustainability in a socially acceptable manner. Direct assessments of the size of these markets or their responses to policy interventions are, however, impeded by their partially illegal nature and the resulting lack of available information. To overcome this data collection challenge, we use a hydroeconomic multi-agent model developed in the Jordan Water Project to indirectly simulate country-wide tanker water market activities on the basis of demand and supply estimates. The demand for tanker water is conceptualized as a residual demand, remaining after a water user has depleted all available cheap and qualitatively reliable piped water. It is derived from residential and commercial demand functions on the basis of survey data. Tanker water supply is determined by farm simulation models calculating the groundwater pumping cost and the agricultural opportunity cost of tanker water. Finally, a spatial market algorithm

Simulating partially illegal markets of private tanker water providers on the country level: A multi-agent, hydroeconomic case-study of Jordan

Science.gov (United States)

Klassert, C. J. A.; Yoon, J.; Gawel, E.; Klauer, B.; Sigel, K.; Talozi, S.; Lachaut, T.; Selby, P. D.; Knox, S.; Gorelick, S.; Tilmant, A.; Harou, J. J.; Mustafa, D.; Medellin-Azuara, J.; Rajsekhar, D.; Avisse, N.; Zhang, H.

2016-12-01

In arid countries around the world, markets of private small-scale water providers, mostly delivering water via tanker trucks, have emerged to balance the shortcomings of public water supply systems. While these markets can provide substantial contributions to meeting customers' water demands, they often partially rely on illegal water abstractions, thus imposing an unregulated and unmonitored strain on ground and surface water resources. Despite their important impacts on water users' welfare and resource sustainability, these markets are still poorly understood. We use a multi-agent, hydroeconomic simulation model, developed as part of the Jordan Water Project, to investigate the role of these markets in a country-wide case-study of Jordan. Jordan's water sector is characterized by a severe and growing scarcity of water resources, high intermittency in the public water network, and a strongly increasing demand due to an unprecedented refugee crisis. The tanker water market serves an important role in providing water from rural wells to households and commercial enterprises, especially during supply interruptions. In order to overcome the lack of direct data about this partially illegal market, we simulate demand and supply for tanker water. The demand for tanker water is conceptualized as a residual demand, remaining after a water user has depleted all available cheap and qualitatively reliable piped water. It is derived from residential and commercial demand functions on the basis of survey data. Tanker water supply is determined by farm simulation models calculating the groundwater pumping cost and the agricultural opportunity cost of tanker water. A market algorithm is then used to match rural supplies with users' demands, accounting for survey data on tanker operators' transport costs and profit expectations. The model is used to gain insights into the size of the tanker markets in all 89 subdistricts of Jordan and their responsiveness to various policy

Microbial quality of drinking water from groundtanks and tankers at ...

African Journals Online (AJOL)

Drinking water quality was investigated at source and corresponding point-of-use in 2 peri-urban areas receiving drinking water either by communal water tanker or by delivery directly from the distribution system to household-based groundtanks with taps. Water quality variables measured were heterotrophic bacteria, total ...

KC-46A Tanker Modernization (KC-46A)

Science.gov (United States)

2015-12-01

Program Startup Workshop with the assistance from Defense Acquisition University at Wright-Patterson Air Force Base, Ohio. July 8 - 10, 2013: The KC-46A...Selected Acquisition Report (SAR) RCS: DD-A&T(Q&A)823-387 KC-46A Tanker Modernization (KC-46A) As of FY 2017 President’s Budget Defense Acquisition ...Deliveries and Expenditures 48 Operating and Support Cost 49 Common Acronyms and Abbreviations for MDAP Programs Acq O&M - Acquisition

Tanker self-help spill recovery systems

Energy Technology Data Exchange (ETDEWEB)

Smedley, J B; Wainwright, J G; Ehman, T K

1991-12-01

An investigation was conducted of the circumstances in which oil spills occur from tankers at sea by analyzing available historical oil spill data. A data base of marine oil spills greater than 134 tonnes occurring from 1974 and June 1990, included in an appendix, was among the information analyzed. The analysis showed that marine oil spills of 5,000 tonnes and greater account for 39.4% of the accidents yet 94.7% of the total spilled quantity; 84% of those spills occur in vessels of 20,000 deadweight tonnes and larger. Of spills over 5,000 tonnes, 78.5% occur outside of harbor or pier areas where spill response equipment may not be readily available. Over 50% of spills are caused by groundings or collisions where the vessel crew might be able to respond in mitigating and controlling the outflow of oil. The review suggested that tanker self-help systems warrant serious consideration. Potential self-help systems are described, ranging from additives such as bioremediation, dispersants, and solidifiers to equipment such as portable pumps, booms, and skimmers. Candidate systems were examined in terms of their safety, ease of operation, practicability, and effectiveness. Their possible performance was then assessed for the case of major marine oil spills that have occurred in Canadian waters. Four systems are identified as potential candidates for further evaluation and possible implementation: internal oil transfer, hydrostatic loading, external oil lightering, and contingency planning. A system design is evaluated and its benefits and possible implementation are outlined, based on integration of the preferred attributes of the above four options. Recommendations for implementation are also provided. 28 refs., 6 figs., 33 tabs.

Microbial quality of drinking water from groundtanks and tankers at ...

African Journals Online (AJOL)

2013-09-23

Sep 23, 2013 ... A lack of infrastructure, coupled .... munity tankers and its relationship to health outcomes in light of water quality ... delivery, taps at the eThekwini Water and Sanitation laboratory ... relationship between drinking water quality, health, hygiene ... over a 2-week period from the point-of-use and source of each.

Global Vigilance, Reach, and Power? Made Possible only with a Robust Tanker Capability

National Research Council Canada - National Science Library

Uyehata, Stephen

2005-01-01

...). Therefore, the CCs should place aerial refueling capability and the recapitalization of the multiple tanker fleets at the top of their integrated priority lists and should also take sufficient...

The role of the water tankers market in water stressed semi-arid urban areas:Implications on water quality and economic burden.

Science.gov (United States)

Constantine, Kinda; Massoud, May; Alameddine, Ibrahim; El-Fadel, Mutasem

2017-03-01

Population growth and development are associated with increased water demand that often exceeds the capacity of existing resources, resulting in water shortages, particularly in urban areas, where more than 60% of the world's population resides. In many developing communities, shortages often force households to depend on water tankers amongst other potential sources for the delivery of water for domestic and/or potable use. While water tankers have become an integral part of the water supply system in many countries, the sector is often unregulated and operates with little governmental supervision. Users are invariably unaware of the origin or the quality of purchased water. In an effort to better assess this sector, a field survey of water vending wells and tankers coupled with a water quality sampling and analysis program was implemented in a pilot semi-arid urban area (Beirut, Lebanon) to shed light on the environmental and socio-economic impacts of the water tanker sector. Total dissolved solids (TDS), chloride (Cl - ), and microbial loads exceeded drinking water quality standards. While TDS and Cl - levels were mostly due to saltwater intrusion in coastal wells, tankers were found to be a significant source of total coliforms. Delivered water costs varied depending on the tanker size, the quality of the distributed water, and pre-treatment used, with a markup of nearly 8-24 folds of the public water supply and an equivalent economic burden of 16% of the average household income excluding environmental externalities of water quality. The study concludes with a management framework towards consumer protection under integrated supply and demand side measures. Copyright © 2016 Elsevier Ltd. All rights reserved.

A new arrangement with nonlinear sidewalls for tanker ship storage panels

Science.gov (United States)

Ketabdari, M. J.; Saghi, H.

2013-03-01

Sloshing phenomenon in a moving container is a complicated free surface flow problem. It has a wide range of engineering applications, especially in tanker ships and Liquefied Natural Gas (LNG) carriers. When the tank in these vehicles is partially filled, it is essential to be able to evaluate the fluid dynamic loads on tank perimeter. Different geometric shapes such as rectangular, cylindrical, elliptical, spherical and circular conical have been suggested for ship storage tanks by previous researchers. In this paper a numerical model is developed based on incompressible and inviscid fluid motion for the liquid sloshing phenomenon. The coupled BEM-FEM is used to solve the governing equations and nonlinear free surface boundary conditions. The results are validated for rectangular container using data obtained for a horizontal periodic sway motion. Using the results of this model a new arrangement of trapezoidal shapes with quadratic sidewalls is suggested for tanker ship storage panels. The suggested geometric shape not only has a maximum surrounded tank volume to the constant available volume, but also reduces the sloshing effects more efficiently than the existing geometric shapes.

Effects of Common Structural Rules on hull-girder reliability of an Aframax oil tanker

International Nuclear Information System (INIS)

Parunov, Josko; Guedes Soares, C.

2008-01-01

This paper aims at quantifying the changes in notional reliability levels that result from redesigning an existing Aframax tanker to comply with the Common Structural Rules (CSR) for double-hull oil tankers. The probability of structural failure is calculated using the first-order reliability method. The evaluation of the wave-induced load effects that occur during long-term operation of the ship in the seaway is carried out in accordance with the International Association of Classification Societies (IACS)-recommended procedure, while transfer functions are calculated using the sink-source 3D linear method. The still-water loads are defined on the basis of a statistical analysis of loading conditions from the loading manual. The ultimate collapse bending moment of the midship cross section, which is used as the basis for the reliability formulation, is evaluated by progressive collapse analysis and by a single-step procedure according to CSR. The reliability assessment is performed for 'as-built' and 'corroded' states of the existing ship and a reinforced ship complying with CSR. It is shown that the hull-girder failure probability of an Aframax tanker is reduced several times due to the reinforcements according to CSR. Sensitivity analysis and a parametric study are performed to investigate the variability of results with the change of parameters of pertinent random variables within their plausible ranges. Finally, differences between load combination approaches by Ferry-Borges and Castanheta method and Turkstra's rule are investigated

Low-head air stripper treats oil tanker ballast water

International Nuclear Information System (INIS)

Goldman, M.

1992-01-01

Prototype tests conducted during the winter of 1989/90 have successfully demonstrated an economical design for air stripping volatile hydrocarbons from oily tanker ballast water. The prototype air stripper, developed for Alyeska's Ballast Water Treatment (BWT) facility in Valdez, Alaska, ran continuously for three months with an average removal of 88% of the incoming volatile organics. Initially designed to remove oil and grease compounds from tanker ballast water, the BWT system has been upgraded to a three-step process to comply with new, stringent regulations. The BWT biological oxidation process enhances the growth of bacteria present in the incoming ballast water through nutrient addition, aeration, and recirculation within a complete-mixed bioreactor. The average removal of BETX is over 95%, however, occassional upsets required the placement of a polishing air stripper downstream of the aeration tanks. Packed-tower air stripping was investigated but deemed economically unfeasible for a facility that would only occasionally be used. Twelve feet of excess gravity head in the existing BWT hydraulic gradeline were employed to drive the air stripper feed. This limited the stripper packing depth to 8 feet and imposed constraints on the design of the inlet water and air distributors. Water distribution, air flow, temperature effects, and fouling from constituents in the ballast water were investigated. The prototype was operated under water and air flow conditions similar to those specified for the full-scale unit, and at a range of test conditions above and below the normal design conditions

Tracking an Oil Tanker Collision and Spilled Oils in the East China Sea Using Multisensor Day and Night Satellite Imagery

Science.gov (United States)

Sun, Shaojie; Lu, Yingcheng; Liu, Yongxue; Wang, Mengqiu; Hu, Chuanmin

2018-04-01

Satellite remote sensing is well known to play a critical role in monitoring marine accidents such as oil spills, yet the recent SANCHI oil tanker collision event in January 2018 in the East China Sea indicates that traditional techniques using synthetic aperture radar or daytime optical imagery could not provide timely and adequate coverage. In this study, we show the unprecedented value of Visible Infrared Imaging Radiometer Suite (VIIRS) Nightfire product and Day/Night Band data in tracking the oil tanker's drifting pathway and locations when all other means are not as effective for the same purpose. Such pathway and locations can also be reproduced with a numerical model, with root-mean-square error of days of the tanker's sinking reveals much larger oil spill area (>350 km2) than previous reports, the impact of the spilled condensate oil on the marine environment requires further research.

Oil-tanker waste-disposal practices: A review

International Nuclear Information System (INIS)

1992-01-01

In the spring of 1991, the Environmental Protection Agency, Region 10 (EPA), launched an investigation into tanker waste disposal practices for vessels discharging ballast water at the Alyeska Pipeline Services Company's Ballast Water Treatment (BWT) facility and marine terminal in Valdez, Alaska. It had been alleged that the Exxon Shipping Company was transferring 'toxic wastes originating in California' to Valdez. In response, EPA decided to examine all waste streams generated on board and determine what the fate of these wastes were in addition to investigating the Exxon specific charges. An extensive Information Request was generated and sent to the shipping companies that operate vessels transporting Alaska North Slope Crude. Findings included information on cargo and fuel tank washings, cleaning agents, and engine room waste

Environmental impact of oil transportation by tankers, pipelines, railway

International Nuclear Information System (INIS)

Tsitskishvili, M.S.; Chelidze, M.A.; Kaviladze, I.; Chkhartishvili, A.G.; Tsitskishvili, L.B.; Ninua, T.L.; Kordzaxia, G.I.; Gavasheli, L.; Petriashvili, E.T.; Alania, M.L.; Gigolashvili, Sh.Z.; Kordzakhia, M.O.; Chankotadze, P.

2005-01-01

Full text : Considering all types of risks (technical, operational, natural hazards (e.g. geo-hazards) and third party intrusion), the underground pipelines constructed in accordance with the international standards are the most safe and reliable system for oil transportation. Statistical data provided by CONCAWE and US Department of Transportation confirms that the pipeline related spills are rare and mainly related to the old pipelines. Georgia's experience yet confirms the general sound guess that the situation in our countries is not the same as in western Europe or USA and accordingly the CONCAWE statistical data can not be applied mechanically. Two spills (although small and manageable), during the recent 4 years and some discovered illegal hot-taps on the Baku-Supsa pipeline indicate that the issue of third party intrusion risks is much higher in the region and well organized security system is required to protect the pipeline from intentional damage. Of course the pipeline system can not function isolated and it is integrated with the other systems of oil transportation, mainly with off-shore terminals and tankers. The most significant of the recorded pollution damages are related to the tanker collisions (like Prestige and Exxon Valdez cases). The basic fact, which we would like to stress, is that the environmental risks related to the tanker collisions are much higher for such confined or semi-confined systems as Black and Caspian seas. The overloading of the Black Sea transportation capacity and especially its limiting narrow point - the Bosporus will inevitably lead in future to the implementation of the restrictive measures limiting transportation of oil by tankers in the Black Sea. Therefore, the role of the BTC pipeline as major transportation system will increase significantly. We consider that responsibility of the scientific society is to facilitate this process as soon as the BTC pipeline is functional. The railway transportation of oil is quite

Effect of Baffles on the Sloshing in Road Tankers Carrying LPG: A Comparative Numerical Study

Directory of Open Access Journals (Sweden)

J. L. Bautista-Jacobo

2015-01-01

Full Text Available This work presents a comparative numerical study of the effect of using baffles, and its design, on the behavior of sloshing in a partially filled road tanker carrying LPG. Navier-Stokes equations and standard k-ε turbulence model are used to simulate fluid movement; the Volume of Fluid (VOF method is used to track the liquid-gas interface. Velocity distributions, sloshing stabilization times, and contours of turbulent kinetic energy, which are of high importance in choosing the best design of baffles, are shown. The results show sloshing stabilization times of 22 and 21 s for road tankers with cross-shaped (Type I and X-shaped (Type II baffles, respectively, finding lower values of turbulent kinetic energy for Type II design, being, therefore, the best design of baffles for damping of sloshing and vehicle control among studied ones.

The market and the economics of large oil tankers

International Nuclear Information System (INIS)

Golomer, O.

1996-01-01

The document aims to assist decision makers in the tanker industry to make effective management strategies for the future deployment of Very Large Crude Carriers (VLCC) in a time of financial uncertainty and environmental awareness. The VLCC market is described and the factors influencing decision-makers are discussed. Financial considerations including shipping assets and company financial security are reviewed together with the financial implications of operating VLCCs. Environmental pressures, such as international regulations an oil pollution reduction measures are then discussed. The document closes with a review of decision-making for shipowning companies in this complex milieu. (UK)

Tanker for the transport of very low temperature liquids at atmospheric pressure

Energy Technology Data Exchange (ETDEWEB)

Messer, E S

1968-02-08

This tanker for the transport of very low temperature liquids, especially liquefied methane or natural gas, has a large capacity reservoir insulated on the outside. A second reservoir in the bottom of the hull, below the main reservoir, collects liquid leaking out from the main reservoir and is equipped with a drain pipe. The pipe serving to fill and to empty the main reservoir passes through this second reservoir. (4 claims)

Explosion of a road tanker containing liquefied natural gas

Energy Technology Data Exchange (ETDEWEB)

Planas-Cuchi, E.; Casal, J. [Universitat Politecnica de Catalunya, Catalonia (Spain). CERTEC; Gasulla, N.; Ventosa, A. [Autonomous Government of Catalonia (Spain). General Directorate for Emergencies and Civl Security

2004-07-01

The explosion of a road tanker transporting LNG (one person killed, two injured) is studied. The analysis shows that the explosion, which followed a two-step mode as for the failure of the vessel, could have been a boiling liquid expanding vapor explosion (BLEVE). The overpressure and thermal radiation have been estimated and related to the effects observed. Only a relatively small part of the energy released in the explosion was manifested in the pressure wave. The large fragments (the three pieces into which the tank was broken) and the truck motor were ejected at various distances along the tank's main axis. (author)

Dissolved petroleum hydrocarbons along the oil tanker route in the southern Bay of Bengal

Digital Repository Service at National Institute of Oceanography (India)

Topgi, R; Noronha, R; Fondekar, S.P.; SenGupta, R

Concentrations of dissolved petroleum hydrocarbons during 3 cruises (Nos. 51, 66 and 68) of R V Gaveshani, along the oil tanker route, in the southern Bay of Bengal at 0, 10 and 20 m were 19.95 + or - 3.38, 16.78 + or - 2.53 and 13.45 + or - 2.17 mu...

Risk Assessment in Financial Feasibility of Tanker Project Using Monte Carlo Simulation

Directory of Open Access Journals (Sweden)

Muhammad Badrus Zaman

2017-09-01

Full Text Available Every ship project would not be apart from risk and uncertainty issues. The inappropriate risk assessment process would have long-term impact, such as financial loss. Thus, risk and uncertainties analysis would be a very important process in financial feasibility determination of the project. This study analyzes the financial feasibility of 17,500 LTDW tanker project. Risk and uncertainty are two differentiated terminologies in this study, where risk focuses on operational risk due to shipbuilding process nonconformity to shipowner finance, while uncertainty focuses on variable costs that affect project cash flows. There are three funding scenarios in this study, where the percentage of funding with own capital and bank loan in scenario 1 is 100% : 0%, scenario 2 is 75% : 25%, and scenario 3 is 50% : 50%. Monte Carlo simulation method was applied to simulate the acceptance criteria, such as net present value (NPV, internal rate of return (IRR, payback period (PP, and profitability index (PI. The results of simulation show that 17,500 LTDW tanker project funding by scenario 1, 2 and 3 are feasible to run, where probability of each acceptance criteria was greater than 50%. Charter rate being the most sensitive uncertainty over project's financial feasibility parameters.

Multifractal cross-correlations between crude oil and tanker freight rate

Science.gov (United States)

Chen, Feier; Miao, Yuqi; Tian, Kang; Ding, Xiaoxu; Li, Tingyi

2017-05-01

Analysis of crude oil price and tanker freight rate volatility attract more attention as the mechanism is not only the basis of industrialization but also a vital role in economics, especially after the year 2008 when financial crisis notably blew the maritime transportation. In this paper, we studied the cross-correlations between the West Texas International crude oil (WTI) and Baltic Exchange Dirty Tanker Index (BDTI) employing the Multifractal Detrended Cross-Correlation Analysis (MF-DCCA). Empirical results show that the degree of short-term cross-correlation is higher than that in the long term and that the strength of multifractality after financial crisis is larger than that before. Moreover, the components of multifractal spectrum are quantified with the finite-size effect taken into consideration and an improved method in terms of constructing the surrogated time series provided. Numerical results show that the multifractality is generated mostly from the nonlinear and the fat-tailed probability distribution (PDF) part. Also, it is apparent that the PDF part changes a lot after the financial crisis. The research is contributory to risk management by providing various instructions for participants in shipping markets. Our main contribution is that we investigated both the multifractal features and the origin of multifractality and provided confirming evidence of multifractality through numerical results while applying quantitative analysis based on MF-DCCA; furthermore, the research is contributory to risk management since it provides instructions in both economic market and stock market simultaneously. However, constructing the surrogated series in order to obtain consistence seems less convincing which requires further discussion and attempts.

Leaking tankers: how much oil was spilled?

International Nuclear Information System (INIS)

Simecek-Beatty, D. A.; Lehr, W. J.; Lankford, J. F.

1997-01-01

A model to estimate leak rates from tankers has been developed for use in emergency situations when more direct oil-loss estimation methods are not available. The model includes algorithms for gravity outflow and air and water ingestion. Three laboratory tests were conducted using fresh water and canola oil to evaluate the model output. Comparison with results from the laboratory experiments indicate good correlation of model results with measured data. However, it is not yet possible in the case of very large crude carriers to answer the question 'how much oil was spilled?' Sensitivity analysis and further laboratory testing were suggested to determine the effect of factors such as: pressure vacuum relief valves that prevent cavitation in the event of tank puncture; changing outside water levels due to wave and tidal action; tank and hole dimensions; and the amount and density of the product.10 refs., 4 figs

THESEUS - achieving maximum possible road transport tanker safety by means of experimental accident simulation; THESEUS - Tankfahrzeuge mit hoechsterreichbarer Sicherheit durch experimentelle Unfallsimulation

Energy Technology Data Exchange (ETDEWEB)

Rompe, K.; Heuser, G.

1996-03-01

In spring 1990, the Federal German Minister for Education, Science, Research and Technology (BMBF) commissioned the team from the Federal Institute for Materials Research and Testing (BAM), DEKRA, Daimler-Benz, the Federal Road Research Institute (BASt) with the University of Cologne, Ellinghaus and TUeV Rheinland (project leader) to perform the research project `THESEUS` (the acronym THESEUS comes from the German `Tankfahrzeuge mit hoechst erreichbarer Sicherheit durch experimentelle Unfallsimulation`, which translates as `achieving maximum possible road transport tanker safety by means of experimental accident simulation`). Arting from an analysis of road transport tanker accidents, crash tests and overturn tests were performed and supplemented by investigations of road transport tanker components and accompanying complex calculations of the failure processes. Parallel to this, the static side-tilt stability of road transport tankers was determined on a tilting test platform. The causes of and constructive possibilities for avoiding overturning, which is the most common cause of accidents in which hazardous materials escape, wewre analysed in dynamic driving tests with supplementary computer simulation. Various measures for improving the safety of road transport tankers were determined and subjected to a cost-benefit analysis. (orig.) [Deutsch] Das Bundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie hat seit 1990 das Forschungsproject `THESEUS` (Tankfahrzeuge mit hoechst erreichbarer Sicherheit durch experimentelle Unfallsimulation) der Arbeitsgemeinschaft aus TUeV Rheinland (Federfuehrung), Bundesanstalt fuer Materialforschung und -pruefung (BAM), DEKRA, Daimler Benz, Bundesanstalt fuer Strassenwesen (BASt), Universitaet Koeln und Ellinghaus gefoerdert. Ausgehend von der detaillierten Analyse von 231 Tankfahrzeugunfaellen wurden Tankfahrzeug-Crashversuche und Tankfahrzeug-Umsturzversuche durchgefuehrt. Diese Messungen an kompletten Fahrzeugen

Design for air-to-air refuelling operations; new passenger and tanker aircraft design for AAR scenarios

NARCIS (Netherlands)

Li, M.O.

2014-01-01

Air-to-air refuelling is a way to improve fuel efficiency of the overall transport system without waiting for the improvement of basic aviation technology. To take full advantage of such an operation, both passenger aircraft and tanker aircraft (which deliver required fuel to the passenger aircraft

Comparative analysis among deterministic and stochastic collision damage models for oil tanker and bulk carrier reliability

Directory of Open Access Journals (Sweden)

A. Campanile

2018-01-01

Full Text Available The incidence of collision damage models on oil tanker and bulk carrier reliability is investigated considering the IACS deterministic model against GOALDS/IMO database statistics for collision events, substantiating the probabilistic model. Statistical properties of hull girder residual strength are determined by Monte Carlo simulation, based on random generation of damage dimensions and a modified form of incremental-iterative method, to account for neutral axis rotation and equilibrium of horizontal bending moment, due to cross-section asymmetry after collision events. Reliability analysis is performed, to investigate the incidence of collision penetration depth and height statistical properties on hull girder sagging/hogging failure probabilities. Besides, the incidence of corrosion on hull girder residual strength and reliability is also discussed, focussing on gross, hull girder net and local net scantlings, respectively. The ISSC double hull oil tanker and single side bulk carrier, assumed as test cases in the ISSC 2012 report, are taken as reference ships.

[A review of the firefighting techniques used on the tanker 'Mega Borg' explosion

International Nuclear Information System (INIS)

Driscoll, J.

1992-01-01

This paper reviews the events leading up to the explosion and fire of the Mega Borg, a Norwegian tanker which exploded in the Gulf of Mexico in June of 1990. It briefly discusses the fire fighting strategy used to cool the ship prior to foam application and the types of equipment used. It also briefly discusses the lightering operation and the cargo recovery and dewatering operations which took place after the fire was extinguished

Oil coastal tanker maintenance and availability

Energy Technology Data Exchange (ETDEWEB)

Goldsztejn, Eduardo; Gomez Haedo, Juan Carlos [Government' s Oil Company of Uruguay (ANCAP), Montivideo (Uruguay)

2008-07-01

ANCAP (Government's Oil Company of Uruguay) owns a 4000 DWT oil coastal tanker which is mainly used for oil transport in the River Plate, Uruguay and Parana rivers. Availability of the ship is critical because of shortage of available vessels in the region. Full maximum draught of the vessel is 4m , so it can navigate in very shallow waters as it is the case of some places in the Uruguay and Parana rivers. Although the ship was built in 1979, it is a complete double hull, powered by two twin main engines and propellers. Since 1994, several changes in maintenance management have been introduced, in order to increase the availability, thus increasing the total oil volume yearly transported. These changes affected several maintenance items and they also included a modification in the design of part of the cargo tank floors of the ship. As a result of these changes, an increase of 60% of the oil derivatives volume transported yearly was achieved. In this paper, some of the important improvements on maintenance practises and management are described, together with a quantification of their influence on vessel's availability and overall maintenance costs. (author)

Corrosion testing on crude oil tankers and other product carriers by means of acoustic emission (AE)

Energy Technology Data Exchange (ETDEWEB)

Lackner, Gerald [TUV Austria, Deutschstrasse 10, 1230 Wien (Austria); Tscheliesnig, Peter [TUV Austria, Deutschstrasse 10, 1230 Wien (Austria)

2004-07-01

In the last decades a lot of maritime disasters with crude oil tankers occurred (e.g. Exxon- Valdez, Erika, Prestige). Every accident led to extreme pollution with horrible consequences not only for the environment but also for the life of the inhabitants of the affected coasts. Although most of these accidents were caused by human errors, the material degradation of the ship hull due to corrosion played an important role. Acoustic emission (AE) is already used to detect and discriminate the stage of corrosion of structures located on land. A consortium consisting of experienced partners from the fields of ship building and classification as well as from AE testing and equipment manufacturing started to investigate the feasibility of this testing technique for its application on oil tankers. The aim of the research project funded by the European Commission is to develop an on-line corrosion monitoring technique based on a permanent installation of AE sensors as well as a spot testing technique during stops in harbors or at anchorages using mobile equipment. Since the project was started, a lot of lab tests as well as background measurements were done on different types of tankers up to a size of 35.000 dead weight tons (DWT). The gathered data were evaluated with a frequency domain based pattern recognition system and it was possible to distinguish the AE signals related to corrosion from those signals, which were emitted by the structure due to the harsh environment on sea (background noise). Together with the oncoming developments of the AE equipment and the improvement of the data base, this project will lead to an important breakthrough for the safe shipping of hazardous products like crude oil. (authors)

Privatization by Other Means: Social Power, Tankers and Techno-Assemblages of Water Supply in Amman, Jordan.

Science.gov (United States)

Mustafa, D.

2016-12-01

Combined piped and tanker based water supply systems have become a ubiquitous feature of urban waterscapes in the global South. Jordanian water sector, and Amman in particular has been a recipient of considerable international financial and technical assistance over the past decades. The international assistance has coupled with the Jordanian state's own pro-market ideological stance, and its political compulsions to spawn a techno-social assemblage of water supply that represents a hybrid state and commercial water supply system. I present the results of a field study in Amman, Jordan on water tankers and water users to understand the techno-political underpinnings of the hybrid system and its impact on differential access to water. I explore how Actor Network Theory (ANT) based analysis of tankers, suction pumps and piped water system and their materiality may explain differential access to water. But that exploration is inflected by a larger political ecological concern with questions of power and discourses about citizenship and claim making on the state. I find that ANT based focus on water technologies, while ontologically fertile, and epistemologically innovative, is nevertheless politically barren. Much richer political insights are to be gained from structural and post-structurally based investigations of the discursive and material drivers of the techno-social assemblages of water supply. The technologies don't just neutrally impact water access, but seem to almost intentionally favour the powerful over the powerless. Surely the political agency must not reside in inanimate technologies but in the social actors and structures that fashion those technologies, and configure them such to reinforce geographies of power. I call for a renewed focus on social power and how its impact on lived geographies is mediated by technology.

Structural maintenance planning based on historical data of corroded deck plates of tankers

International Nuclear Information System (INIS)

Garbatov, Y.; Guedes Soares, C.

2009-01-01

A probabilistic maintenance and repair analysis of tanker deck plates subjected to general corrosion is presented. The decisions about when to perform maintenance and repair on the structure are studied. Different practical scenarios are analyzed and optimum repair times are proposed. The optimum repair age and intervals are defined based on the statistical analysis of operational data using the Weibull model and some assumptions about the inspection and time needed for repair. The total cost is calculated in normalized form.

An Investigation of the Bomber and Tanker Mating Process in the Single Integrated Operations Plan.

Science.gov (United States)

1982-03-01

REFUELING C LOCATIONS ARE OPTIMIZED TO MAXIMIZE BOKSER ENTRY POINT C FUEL. BOMBER, TANKER, AND FRI DATA ARE INPUTS TO THlE C PROGRAM, AND THE INDIVIDUAL...NOTluI 50 UEAD(3.,E,1ND=I0)PRULAT(I).PRULONCI),PRICAP(I) COTOSO I$ NOPRlmI-1 TASm4 44. C C FOR EACH BOKSER TRACK, ASSIGN THE APPROPRIATE At mIN 0r C

Economic impacts of oil spills: Spill unit costs for tankers, pipelines, refineries, and offshore facilities

International Nuclear Information System (INIS)

1993-01-01

The impacts of oil spills -- ranging from the large, widely publicized Exxon Valdez tanker incident to smaller pipeline and refinery spills -- have been costly to both the oil industry and the public. For example, the estimated costs to Exxon of the Valdez tanker spill are on the order of $4 billion, including $2.8 billion (in 1993 dollars) for direct cleanup costs and $1.125 billion (in 1992 dollars) for settlement of damages claims caused by the spill. Application of contingent valuation costs and civil lawsuits pending in the State of Alaska could raise these costs appreciably. Even the costs of the much smaller 1991 oil spill at Texaco's refinery near Anacortes, Washington led to costs of $8 to 9 million. As a result, inexpensive waming, response and remediation technologies could lower oil spin costs, helping both the oil industry, the associated marine industries, and the environment. One means for reducing the impact and costs of oil spills is to undertake research and development on key aspects of the oil spill prevention, warming, and response and remediation systems. To target these funds to their best use, it is important to have sound data on the nature and size of spills, their likely occurrence and their unit costs. This information could then allow scarce R ampersand D dollars to be spent on areas and activities having the largest impact. This report is intended to provide the ''unit cost'' portion of this crucial information. The report examines the three key components of the US oil supply system, namely, tankers and barges; pipelines and refineries; and offshore production facilities. The specific purpose of the study was to establish the unit costs of oil spills. By manipulating this key information into a larger matrix that includes the size and frequency of occurrence of oil spills, it will be possible' to estimate the likely future impacts, costs, and sources of oil spills

Nature preservation acceptance model applied to tanker oil spill simulations

DEFF Research Database (Denmark)

Friis-Hansen, Peter; Ditlevsen, Ove Dalager

2003-01-01

is exemplified by a study of oil spills due to simulated tanker collisions in the Danish straits. It is found that the distribution of the oil spill volume per spill is well represented by an exponential distribution both in Oeresund and in Great Belt. When applied in the Poisson model, a risk profile reasonably...... acceptance criterion for the pollution of the environment. This NPWI acceptance criterion is applied to the oil spill example....... be defined in a similar way as the so-called Life Quality Index defined by Nathwani et al [Nathwani JS, Lind NC, Padey MD. Affordable safety by choice: the life quality method. Institute for Risk Research, University of Waterloo; Waterloo (Ontario, Canada):1997], and can be used to quantify the risk...

The Iron Triangle Manifested: U.S. Air Force Tanker Lease 2001-2005 Case Study

Science.gov (United States)

2012-01-01

Simply put, Air Force leaders never said they even needed the tankers until they woke up one morning and saw a pile of money on the table. —Eric Miller...this assessment, stating the KC–135 could fly well past the turn of the century.5 Responding to the GAO report, the Air Force formed a team of its...concerns were manageable.6 The team predicted fleet sustainment costs would grow $20 million each year due to increases in depot maintenance hours and

Tanker milk variability according to farm feeding practices: vitamins A and E, carotenoids, color, and terpenoids.

Science.gov (United States)

Agabriel, C; Cornu, A; Journal, C; Sibra, C; Grolier, P; Martin, B

2007-10-01

The aim of this work was to study the variability in the composition of bulk milk mixtures of fat-soluble compounds (vitamins A and E, carotenoids, and terpenoids) and assess the links with milk production conditions. Milk from 10 collection trips in the French department of the Haute-Loire (10 to 36 herds per trip) was sampled in the tanker twice during the winter period and 3 times during the grazing season. The collection trips differed in their altitude (440 to 1,150 m) and the forage system (grass or based on corn silage). Vitamins A and E, carotenoids, and terpenoids of the 50 tanker loads of milk were analyzed. Data of milk production conditions in the 204 farms made it possible to constitute indicators for the collection trip and to define 50 mean herds. The relationships between mean herd characteristics (breed, stage of lactation, and feed) and milk characteristics were investigated. The constituents of tanker loads of milk were comparable to those observed in milk produced by groups of animals receiving contrasting diets (rich in concentrate or corn silage vs. pasture). The characteristics of the milk differed according to the period; those produced at grazing were more yellow (1.02 +/- 0.4; mean of difference) and richer in beta-carotene, lutein, vitamin E (2.0 +/- 1.2, 0.23 +/- 0.12, and 6.1 +/- 5.0 mug/g of fat, respectively), and sesquiterpenes (2.7 +/- 2.5) than winter. The variations observed for beta-carotene, lutein, and vitamin E were linked to the proportion of grazed grass or grass silage in the forage (r = 0.66, 0.69, and 0.51, respectively), unlike the vitamin A content. During grazing, 20 of the 32 terpenoids identified were associated with the proportion of permanent grassland available for grazing or cut. These results show that feeding is an effective way to modify the quality of dairy products, even in the case of bulk tank milk mixtures. Dairy plants could market different milks, which would contain specific compositions.

The environmental management of oil tanker routes in UK waters

Energy Technology Data Exchange (ETDEWEB)

Owen, J. [University of Wales, Cardiff (United Kingdom). Dept. of Maritime Studies and International Transport

1999-09-01

The recent Haven, Aegean Sea and Sea Empress incidents have highlighted the need for protective measures against the risks posed by the shipping industry to the UK coast. This is particularly the case in the vicinity of environmentally sensitive areas. The principal objectives of this paper are to investigate the state of environmental management of tanker traffic in the UK by putting the geography of shipping into its environmental context. Regional traffic levels, accident rates, oil spills, and their potential consequences upon the environment have been summarised via a risk assessment which also considers coastal sensitivity. An assessment of measures available at international level then sets the scene for a review of marine traffic management schemes in operation around the UK. The state of management and its approaches are also discussed and a number of recommendations put forward during marine conferences in the last twelve months are considered.

The environmental management of oil tanker routes in UK waters

International Nuclear Information System (INIS)

Owen, J.

1999-01-01

The recent Haven, Aegean Sea and Sea Empress incidents have highlighted the need for protective measures against the risks posed by the shipping industry to the UK coast. This is particularly the case in the vicinity of environmentally sensitive areas. The principal objectives of this paper are to investigate the state of environmental management of tanker traffic in the UK by putting the geography of shipping into its environmental context. Regional traffic levels, accident rates, oil spills, and their potential consequences upon the environment have been summarised via a risk assessment which also considers coastal sensitivity. An assessment of measures available at international level then sets the scene for a review of marine traffic management schemes in operation around the UK. The state of management and its approaches are also discussed and a number of recommendations put forward during marine conferences in the last twelve months are considered

From tankers to tissues : tracking the degradation and fate of oil discharges in Port Valdez, Alaska

International Nuclear Information System (INIS)

Payne, J.R.; Braddock, J.F.; Bailey, J.; Ka'aihue, L.; Kuckertz, T.H.; Short, J.W.; Driskell, W.B.

2005-01-01

An average of 9 million gallons per day of oil-contaminated ballast water off loaded from tankers are treated at the Alyeska Pipeline Service Company Ballast Water Treatment Facility at the terminus of the Trans-Alaska Pipeline in Port Valdez, Alaska. This paper focuses on the results of 2 Prince William Sound Regional Citizens' Advisory Council monitoring programs which detail changes in the chemical composition of treated ballast water as it moves from tankers through the facility and subsequently traces the effluent hydrocarbons into the receiving environment of Port Valdez. The treatment facility involves gravity separation tanks, dissolved air flotation cells and biological treatment tanks. Effluent containing traces of volatile aromatics, including benzene, toluene, ethylbenzene and xylenes, low levels of oil, saturated hydrocarbons and polycyclic aromatic hydrocarbons is being continuously discharged to Port Valdez. Because of the extremely large average flow rate, low concentrations in the effluent can add up to a significant mass discharge. Samples from the facility were collected on 3 occasions. In March 2004, a limited pilot series of composite samples were collected from the effluent and the effluent to Port Valdez from a sampling port in the Fan/Meter Building. Second-round samples were collected from a wider suite of locations. A BIORATE assay study was completed during September 2004 and January 2005 field programs to measure degradation rates. The largest hydrocarbon pollution sources detected in samples from Port Valdez stations are correlated with an oil spill mishap at the terminal in 1994 and a sheen event in 1997. Apart from these events, concentrations from petrogenic sources are usually near or below the detection limits of the analytic methods used. However, on a routine basis, oil signals attributed to the facility effluent are detectable in mussel tissues at both Alyeska Marine Terminal and Gold Creek stations, and in sediments at Alyeska

A Model for Prediction of Propulsion Power and Emissions – Tankers and Bulk Carriers

DEFF Research Database (Denmark)

Lützen, Marie; Kristensen, Hans Otto Holmegaard

To get an idea of the reduction in propulsion power and associated emissions by varying the speed and other ship design main parameters, a generic model for parameter studies of tankers and bulk carriers has been developed. With only a few input parameters of which the maximum deadweight capacity...... is the primary input a proposal for the main dimensions is made. Based on these dimensions and other ship particulars which are determined by the program the necessary installed propulsion power can be calculated. By adjusting the vessel design, i.e. the suggested main dimensions, and varying the speed...

Oil and chemical spill research and development in the United Kingdom

International Nuclear Information System (INIS)

Goodman, C.

1992-01-01

The Marine Pollution Control Unit (MPCU) falls within the UK Department of Transport's Marine Directorate and is the lead agency in the UK for the control of marine pollution. The MPCU assumes central government's responsibility for controlling two aspects of marine pollution: at sea response to oil and chemical spills from ships, and coordinating beach cleaning activities. All research funded by the MPCU is therefore directed at these two responsibilities. The MPCU was established in 1978 after a series of major tanker incidents in European waters (notably the AMOCO CADIZ, France) in recognition of the fact that it was not reasonable to expect the owners of tankers which operate on a world-wide basis to make arrangements for dealing with oil spills wherever they may occur. The UK Government therefore decided to set up a response unit, the MPCU, with specific responsibilities for dealing with oil and chemical spills from ships at sea. The responsibility for dealing with pollution once it comes ashore lies with the local authorities. However, to avoid expenditure by individual authorities on specialized equipment which will be rarely required, the government decided to set up stockpiles of such equipment in strategic locations to be drawn on by authorities as and when necessary. The government also provides training in the use of this equipment, offers scientific and technical advice and, for major spills, will coordinate beach cleaning activities

Comparison of Heat Insulations for Cryogenic Tankers Using Analytical and Numerical Analysis

Directory of Open Access Journals (Sweden)

Ramón Miralbés Buil

2013-01-01

Full Text Available This paper presented a methodology for the design of heat insulations used in cryogenic tankers. This insulation usually comprises a combination of vacuum and perlite or vacuum and superinsulation. Concretely, it is a methodology to obtain the temperatures, heat fluxes, and so forth. Using analytical tools has been established, which is based on the equivalence with an electric circuit, and on numerical tools using finite elements. Results obtained with both methods are then compared. In addition, the influence of the outer finish of the external part, due to the effect of the solar radiation, is analyzed too, and the equations to determine the maximum time available to transport the cryogenic liquid have been established. All these aspects are applied to a specific cryogenic commercial vehicle.

Modeling Residential Water Consumption in Amman: The Role of Intermittency, Storage, and Pricing for Piped and Tanker Water

Directory of Open Access Journals (Sweden)

Christian Klassert

2015-07-01

Full Text Available Jordan faces an archetypal combination of high water scarcity, with a per capita water availability of around 150 m3 per year significantly below the absolute scarcity threshold of 500 m3, and strong population growth, especially due to the Syrian refugee crisis. A transition to more sustainable water consumption patterns will likely require Jordan’s water authorities to rely more strongly on water demand management in the future. We conduct a case study of the effects of pricing policies, using an agent-based model of household water consumption in Jordan’s capital Amman, in order to analyze the distribution of burdens imposed by demand-side policies across society. Amman’s households face highly intermittent piped water supply, leading them to supplement it with water from storage tanks and informal private tanker operators. Using a detailed data set of the distribution of supply durations across Amman, our model can derive the demand for additional tanker water. We find that integrating these different supply sources into our model causes demand-side policies to have strongly heterogeneous effects across districts and income groups. This highlights the importance of a disaggregated perspective on water policy impacts in order to identify and potentially mitigate excessive burdens.

Economic impacts of oil spills: Spill unit costs for tankers, pipelines, refineries, and offshore facilities. [Task 1, Final report

Energy Technology Data Exchange (ETDEWEB)

1993-10-15

The impacts of oil spills -- ranging from the large, widely publicized Exxon Valdez tanker incident to smaller pipeline and refinery spills -- have been costly to both the oil industry and the public. For example, the estimated costs to Exxon of the Valdez tanker spill are on the order of $4 billion, including $2.8 billion (in 1993 dollars) for direct cleanup costs and $1.125 billion (in 1992 dollars) for settlement of damages claims caused by the spill. Application of contingent valuation costs and civil lawsuits pending in the State of Alaska could raise these costs appreciably. Even the costs of the much smaller 1991 oil spill at Texaco`s refinery near Anacortes, Washington led to costs of $8 to 9 million. As a result, inexpensive waming, response and remediation technologies could lower oil spin costs, helping both the oil industry, the associated marine industries, and the environment. One means for reducing the impact and costs of oil spills is to undertake research and development on key aspects of the oil spill prevention, warming, and response and remediation systems. To target these funds to their best use, it is important to have sound data on the nature and size of spills, their likely occurrence and their unit costs. This information could then allow scarce R&D dollars to be spent on areas and activities having the largest impact. This report is intended to provide the ``unit cost`` portion of this crucial information. The report examines the three key components of the US oil supply system, namely, tankers and barges; pipelines and refineries; and offshore production facilities. The specific purpose of the study was to establish the unit costs of oil spills. By manipulating this key information into a larger matrix that includes the size and frequency of occurrence of oil spills, it will be possible` to estimate the likely future impacts, costs, and sources of oil spills.

The Erika tanker shipwreck, one year later. synthesis; Naufrage du petrolier Erika, un an apres. synthese

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-12-01

In december 1999 the Erika tanker shipwreck broke along the Brittany coast leading to the most important sea pollution by hydrocarbons, since the Amoco-Cadiz. One year after this accident the Ministry of the territory management and of the environment takes stock on the actions carried on after the shipwreck: the management of the POLMAR fund, the shoreline cleaning, the land and water ecosystems restoration, the wastes storage and processing, the ecological consequences. A special part is devoted to the maritime transport regulations and safety and to the victims compensation. (A.L.B.)

Technical Proposal for Loading 3000 Gallon Crude Oil Samples from Field Terminal to Sandia Pressurized Tanker to Support US DOE/DOT Crude Oil Characterization Research Study

Energy Technology Data Exchange (ETDEWEB)

Lord, David; Allen, Raymond

2016-10-01

Sandia National Laboratories is seeking access to crude oil samples for a research project evaluating crude oil combustion properties in large-scale tests at Sandia National Laboratories in Albuquerque, NM. Samples must be collected from a source location and transported to Albuquerque in a tanker that complies with all applicable regulations for transportation of crude oil over public roadways. Moreover, the samples must not gain or lose any components, to include dissolved gases, from the point of loading through the time of combustion at the Sandia testing facility. In order to achieve this, Sandia designed and is currently procuring a custom tanker that utilizes water displacement in order to achieve these performance requirements. The water displacement procedure is modeled after the GPA 2174 standard “Obtaining Liquid Hydrocarbons Samples for Analysis by Gas Chromatography” (GPA 2014) that is used routinely by crude oil analytical laboratories for capturing and testing condensates and “live” crude oils, though it is practiced at the liter scale in most applications. The Sandia testing requires 3,000 gallons of crude. As such, the water displacement method will be upscaled and implemented in a custom tanker. This report describes the loading process for acquiring a ~3,000 gallon crude oil sample from commercial process piping containing single phase liquid crude oil at nominally 50-100 psig. This document contains a general description of the process (Section 2), detailed loading procedure (Section 3) and associated oil testing protocols (Section 4).

Assessing the damage caused by the oil spill from the tanker Erika

International Nuclear Information System (INIS)

Delache, X.; Erhard-Cassegrain, A.

2001-07-01

In December 1999, France was faced with a large-scale marine and ecological disaster following the accident involving the oil tanker Erika which split in two before sinking off the coast of Brittany (western France). This disaster had significant impacts on the coastal environment, affecting 400 km of shoreline. Very different aspects need to be considered in order to assess the damage caused, for which suitable methodologies must be used. Expenditure incurred on emergency and remedial measures to prepare for the 2000 summer season can easily be identified. The main effect of the disaster was ecological: a wide variety of habitats and species, and in particular many protected areas were affected. In addition, economic activities were seriously disrupted, especially tourism, fishing and shellfish production. However, it is harder to assess the economic losses incurred since a large number of short-term and long-term factors were affected. (author)

Environmental law issues: Offshore oil and gas activities and tanker transportation

International Nuclear Information System (INIS)

Chapman, P.M.

1991-01-01

The environmental law issues that arise from offshore oil/gas activities and petroleum transport are reviewed, focusing on marine oil pollution and especially on the issues surrounding accidental spills. Some observations are offered on the context of these issues, namely on the risks of oil spills, the difficulty of spill response in the ocean and on shorelines, and the possible environmental damage. Environmental control of petroleum operations is discussed with reference to Canadian regulation, the primary source of which is the Oil and Gas Production and Conservation Act. These regulations require developmental approval for offshore operations, formulation of plans for foreseeable spill emergencies, and compensation to those affected by spills, notably those in the fishing industry. Ship-source oil pollution and spill compensation is discussed with reference to international agreements and the Canada Shipping Act. Some problems and trends with oil spill compensation and recovery for environmental damage are noted in such areas as tanker ship standards, cleanup capabilities, and inadequacy of spill penalties and compensation. 18 refs., 1 fig

Development of techniques for tagging precursor and essential chemicals

Energy Technology Data Exchange (ETDEWEB)

Swansiger, W.A.; Shepodd, T.J. [Sandia National Labs., Livermore, CA (United States); Phillips, M.L.F. [Sandia National Labs., Albuquerque, NM (United States)

1994-01-01

The ability to identify the manufacturers and distributors of chemicals seized in raids of illicit drug labs would be of great value in controlling the diversion of these chemicals. We developed a tagging scheme based on the addition of sub-ppM concentrations of various combinations of rare-earth elements to the target chemicals and evaluated a number of techniques for detecting the tags. We developed soluble tags for tagging liquids and selected Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) as the preferred detection technique. We developed insoluble tags for tagging solids and developed methods to analyze them and mix them into solid precursors. We have successfully demonstrated the tagging of several solvents and two of the precursor chemicals used in one of the most popular clandestine methamphetamine syntheses (ephedrine reacting with hydriodic acid/red phosphorus). The tagging scheme is capable of yielding tens of thousands of signatures (using holmium as an internal standard and up to 9 rare-earths at up to 3 concentrations yields 3{sup 9} {minus} 1 = 19,682 signatures) and is applicable to most of the chemicals on the precursor and essential chemicals list. In the concentrations employed, the tags are safe enough to be added to pharmaceuticals and cheap enough to tag tanker loads of chemicals.

Effects of Elevated Soil Carbon dioxide (CO2) Concentrations on ...

African Journals Online (AJOL)

PROF HORSFALL

concentrations on spring wheat and soil chemical properties in the Sutton Bonington Campus, of the University of ... pipeline, marine tanker or road tankers to the storage site. .... Chlorophyll analysis of wheat plant was determined using the ...

Transporting US oil imports: The impact of oil spill legislation on the tanker market

International Nuclear Information System (INIS)

1992-06-01

This report looks at the impact of the Oil Pollution Act of 1990 and the developing State oil spill regulations on the tanker and coastal barge markets, and at the implications for the future of the U.S. seaborne petroleum trades. The analysis relied on a dual approach. Because much of the legislation, both State and Federal, is still evolving--particularly with respect to implementing regulations--as yet there can be no definitive assessment of its impact. Consequently a quantitative analysis of fleets, trades, and vessel movements, was complemented by extensive interviews. Discussions have been held with oil companies large and small, shipowners, charterers, insurance companies, classification societies, and a variety of public and private institutions active in the maritime industry. All interviews were conducted in confidence: no individual views are identified in the report. (AT)

75 FR 10546 - Shipping Coordinating Committee; Notice of Committee Meeting

Science.gov (United States)

2010-03-08

... prevent explosions on oil and chemical tankers transporting low flash point cargoes --Clarification of... on evacuation analysis for new and existing passenger ships --Consideration of IACS unified interpretations --Fixed hydrocarbon gas detection systems on double-hull tankers --Harmonization of the...

Analisis Potensi Kebangkrutan PT. Berlian Laju Tanker, Tbk. dengan Menggunakan Altman’s Z Score

Directory of Open Access Journals (Sweden)

Iswandi Iswandi

2012-11-01

Full Text Available PT. Berlian Laju Tanker, Tbk. (BLTA is a company engaged in the ocean transportation services listed on the Indonesia Stock Exchange and the Singapore Stock Exchange. In 2009 and 2010 BLTA experienced a net loss. At the end of 2011 the company rocked the financial markets in Indonesia and Singapore being unable to meet financial obligations to financial institutions and corporate bondholders. Given such conditions until the end of August 2012 BLTA can not submit audited financial statement of year 2011 to the authorities of stock exchange and public. By using the 2007 to 2010 audited financial statements and June 2011 inhouse financial statement were analyzed using Altman's Z score model can be known that since 2007 BLTA produce a Z score were classified bankruptcy. Investors should analyze the financial condition by using Z Score in order to minimized shareholders and bondholders potential losses.

Treatment of bilge and oily drain water of tankers and current measures against combustible oil gas discharge; Tanker no biruji yudakusui shori oyobi kanensei sekiyu gas haishutsu taiskau no genjo

Energy Technology Data Exchange (ETDEWEB)

Agatsuma, Y.

1996-07-25

This paper describes the current actual conditions on treatment of bilge discharged from engine area and oily drain water from cargo area of tankers. Clean bilge among various bilges discharged from engine area such as vapor drain, fresh water, rainwater, seawater and condensed water is directly dumped into the sea after temporary storage in a clean tank. Oily bilge is produced mainly by mixing of clean bilge and leakage oil from main engines and various auxiliaries. Oily bilge is dumped into the sea under comparative monitoring of the bilge quality with the dumping standard by oil concentration monitoring and control equipment after the primary treatment in a treatment tank and the secondary treatment in a bilge separator. Oily drain water from cargo area contains water ballast for cargo oil tanks, wash water for tanks and lines, and bilge produced in pump room. The oily drain water is dumped under a specific condition. However, water ballast for specific ballast tanks is excluded from the oily drain water. 2 figs.

Unified Tanker Survey and Inspection Regime in Terms of Reducing Psychophysical Strain of the Crew

Directory of Open Access Journals (Sweden)

Toni Bielić

2017-09-01

Full Text Available The paper focuses on analysis of the effect of various surveys and inspections on the psychophysical behaviour of the crew. After analysing the scope and the extent of each regime, the authors identified more than 60% of surveys overlapping each other. Furthermore, the results of the survey conducted among seafarers indicate that the present method of carrying out ship surveys and inspections have a negative effect on the psychophysical condition of the crew. Therefore, a new method of tanker inspections has been proposed in order to reduce the psychophysical strain of the crew. The proposed method would minimise the annual duration of the inspections up to 30% and improve inspection time coordination without compromising quality and safety of the ships.

Influence of Climatic Factors on the Efficiency of Disposal Metal- Hydride Unit for the Double-Fuel Low-Speed Internal Combustion Engine of Gas Tankers

OpenAIRE

Cherednichenko, Oleksandr Costyntunovich; Tkach, Mykhaylo Romanovich

2017-01-01

Contemporary tendencies in the development of ship power engineering have been analyzed. Consideration was given to the specific features of the transportation of liquefied natural gas by gas tankers. The prospects of utilization of the secondary energy resources of marine double-fuel low-speed diesel engines were defined. The metal hydride units of a continuous action were offered for this purpose. The need for the estimation of the influence of climatic factors on the efficiency of disposal...

Treatment of oil spill fire hazards with chemical dispersants: a case history

Energy Technology Data Exchange (ETDEWEB)

Kaufmann, S.

1982-10-01

Federal contingency plans include the use of chemical dispersants to ameliorate hazardous situations caused by spills of flammable or explosive petroleum products. The closing of the Williamsburg Bridge in New York City, when a gasoline tanker exploded and sank under it, was nearly overshadowed by the leakage of 7 750 000 L (2 000 000 gal) of gasoline from a storage facility in Boston. The threat to a densely populated neighborhood of six-family tenement houses and a large racetrack that stabled hundreds of Thoroughbred horses led to the use of a chemical dispersant to neutralize the fire hazard. Favorable results by fire departments in recent years, as a result of training, have established dispersants as the method of choice to handle nonburning spill incidents. Even though the teams that responded to several such emergencies of course held the protection of life and property as paramount, no toxicological environmental effects were noted during subsequent observations.

Production and characterization of ceramic composite Al_2O_3-TiO_2 reinforced with Y_2O_3 and its stability in crude oil for internal coating of petroleum tankers

International Nuclear Information System (INIS)

Yadava, Y.P.; David, N.R.; Sanguinetti Ferreira, R.A.; Shinohara, A.H.

2014-01-01

The internal surfaces of crude petroleum tankers are subjected to corrosive environments, therefore it is of great importance to research coatings for the protection of those structures. Ceramic materials generally exhibit characteristic chemical inertness and are shown as material option for this application. In this study alumina-titania ceramic composites have been produced and reinforced with yttria. These composites were produced by thermo-mechanical process, sintered at 1350 ° C for 24 hours, and left to cool down in the oven. The structural and microstructural characterization of the sintered material was tested by X-ray diffraction and scanning electron microscopy. And its mechanical property was studied by Vickers microhardness test. After this characterization, the samples underwent a stability test where they were immersed in crude oil at room temperature for 60 days, during which were periodically subjected to tests related to stability, which was found found that the material was free from cracks, fissures or fractures, presenting for these reasons characteristics of inertia when subjected to crude oil environment. (author)

Report of the Chief Inspector of Marine Accidents into the grounding of the tanker Sea Empress at Milford Haven between 15 and 21 February 1996

International Nuclear Information System (INIS)

1997-01-01

The motor tanker, Sea Empress, was loaded with cargo of 130,018 tonnes of light crude oil when she went aground while entering the harbour at Milford Haven in the United Kingdom on 15th February 1996. About 2,500 tonnes of crude oil were released from damaged cargo tanks when the vessel first grounded. In preparation for a lightening operation, the Sea Empress was first manoeuvred into deeper water then, on 17th February, turned in order to be re-anchored head to wind in the deteriorating weather conditions. Control was lost and the vessel grounded again. Over the next four days the tanker went aground on a number of occasions before being successfully re-floated, taken to a berth within the Haven and the remainder of the cargo discharged. A further 69,300 tonnes of oil were lost to the sea over the period of salvage. The initial grounding and the salvage operation are analysed. The cause of the initial grounding was found to be pilot error. In addition to the bad weather, the lack of tugs of sufficient power and manoeuvrability, and inadequate understanding of the local tidal currents have been identified as the factors which extended the time taken to carry out the salvage operation. Recommendations are made in the light of the findings. (UK)

Investigation of impact phenomena on the marine structures: Part I - On the behaviour of thin-walled double bottom tanker during rock-structure interaction

Science.gov (United States)

Prabowo, A. R.; Cho, H. J.; Byeon, J. H.; Bae, D. M.; Sohn, J. M.

2018-01-01

Predicted loads, such as crew, cargo, and structure have been applied as main inputs during ship design and analysis. However, unexpected events on the sea has high possibility to deliver remarkable losses for ship, industry, and environment. Previous oil spill incident by the Exxon Valdez in Alaska is the perfect example which an environmental damage and industry loss are initiated by an impact phenomenon on the ship, i.e. grounding. Even though hull arrangement has adopted double hull system, grounding may threaten ship safety in various scenarios. This situation pushes society to demand sustainable investigation for impact phenomena on water transportation mode to update understanding in the phenomenon and ensure structural safety during ship operation. This work aimed to study structural behaviour of chemical tanker as a marine structure under impact, namely ship grounding. Bottom raking case was considered to be calculated by virtual experiment. The study was performed using nonlinear finite element (FE) method and an idealised geometry of seabed rock would be deployed to be hard obstruction. Observation on the selected crashworthiness criteria, i.e. internal energy and crushing force indicated that as advanced penetration occurred on the ship structure, the absorbed strain energy continued to increase, while major fluctuation appeared during the initial contact between obstruction and ship happened. Damage extent of several structural members during the crushing process was shown, which concluded that the bottom plating had the largest severity in forms of tearing mode among of all members on the bottom structure.

Were freak waves involved in the sinking of the Tanker "Prestige"?

Directory of Open Access Journals (Sweden)

A. Lechuga

2006-01-01

Full Text Available This paper deals with the possible involvement of freak, rogue or giant waves in the damage suffered by the Tanker Prestige, which eventually led to its sinking. By reason of their very characteristics, giant waves are hard to record. Their more or less sudden appearance makes them fairly elusive objects, except for the consequences they produce. However, some hints with regard to the probability of their occurrence can be derived from considering how close the maritime weather of the area of interest is to the situation which is optimal for their generation. This paper takes into account the wave field in the area and at the time of the Prestige accident and investigates how near or how far the wave field was to the instability conditions that are favourable to the generation of freak waves in the different approximations. This paper explores mostly the modulation instability which is one of the most common mechanisms to produce freak waves: it leads to the decomposition of an initially homogeneous train of Stokes waves firstly into a series of groups of waves, whose envelope then produces the so-called "solitons", that then collapse in the form of a giant wave. This mechanism mainly occurs in deep waters. Zakharov studied it in 1968 and, independently, Benjamin and Feir analysed it in 1967. This paper proves that the wave field was conspicuously two dimensional with two main wave components travelling in directions almost orthogonal to each other. This means that the wave field was well outside the instability domain. Therefore it is concluded that freak waves were very unlikely generated and it is improbable that they were responsible for the accident.

Assessing the damage caused by the oil spill from the tanker Erika; Erika: elements d'evaluation des dommages

Energy Technology Data Exchange (ETDEWEB)

Delache, X.; Erhard-Cassegrain, A

2001-07-01

In December 1999, France was faced with a large-scale marine and ecological disaster following the accident involving the oil tanker Erika which split in two before sinking off the coast of Brittany (western France). This disaster had significant impacts on the coastal environment, affecting 400 km of shoreline. Very different aspects need to be considered in order to assess the damage caused, for which suitable methodologies must be used. Expenditure incurred on emergency and remedial measures to prepare for the 2000 summer season can easily be identified. The main effect of the disaster was ecological: a wide variety of habitats and species, and in particular many protected areas were affected. In addition, economic activities were seriously disrupted, especially tourism, fishing and shellfish production. However, it is harder to assess the economic losses incurred since a large number of short-term and long-term factors were affected. (author)

Comparison of residual strength-grounding damage index diagrams for tankers produced by the ALPS/HULL ISFEM and design formula method

Directory of Open Access Journals (Sweden)

Do Kyun Kim

2013-03-01

Full Text Available This study compares the Residual ultimate longitudinal strength – grounding Damage index (R-D diagrams produced by two analysis methods: the ALPS/HULL Intelligent Supersize Finite Element Method (ISFEM and the design formula (modified Paik and Mansour method – used to assess the safety of damaged ships. The comparison includes four types of double-hull oil tankers: Panamax, Aframax, Suezmax and VLCC. The R-D diagrams were calculated for a series of 50 grounding scenarios. The diagrams were efficiently sampled using the Latin Hypercube Sampling (LHS technique and comprehensively analysed based on ship size. Finally, the two methods were compared by statistically analysing the differences between their grounding damage indices and ultimate longitudinal strength predictions. The findings provide a useful example of how to apply the ultimate longitudinal strength analysis method to grounded ships.

Utilisation of VOC in Diesel Engines. Ignition and combustion of VOC released in crude oil tankers

International Nuclear Information System (INIS)

Melhus, Oeyvin

2002-01-01

The emission of VOC (Volatile Organic Compound) is a significant source of hydrocarbon pollution. In Norway, the offshore oil industry represents a major source. This emission represents both an energy loss and an environmental problem. Gas tankers have used boil-off gas from the cargo tanks as fuel for some time. However, for the current VOC project a new fuel injection concept is designed for tankers to take advantage of the energy present in the VOC evaporated from crude oil. The VOC is mixed with inert gas in these tankers, and thus the utilisation of this gas represents new challenges. The VOC project uses the concept of ''Condensate Diesel Process'' with pilot ignition. An experimental study of ignition and combustion of VOC Fuels reported here was initiated by the time it was decided to start a pilot project converting propulsion engines in shuttle tankers to use VOC Fuel. It is an experimental study carried out at the Marine Technology Centre (MTS). The objective was to study ignition and combustion of the chosen process in comparison with an ordinary diesel process. The experimental results have been discussed and compared with theoretical considerations of injection, ignition and combustion. For experiments on combustion, a rapid compression machine ''DyFo'' was redesigned to use VOC Fuel. The DyFo test rig was initially designed to study ignition and early combustion of spark ignited homogeneous gas/air charges. To study the ignition and early combustion of VOC Fuel injected at high pressure and ignited by pilot diesel fuel, a redesign was necessary. An important feature of the DyFo, is the visualisation of the combustion. The advantage of the DyFo test rig over an engine, is its simplicity and controllability. In an engine the visualisation would suffer from combustion deposits disturbing the view through the quartz glasses, making the images more difficult to interpret. The simplicity is on the other side a drawback. Correct thermal conditions inside

Behavior of chemicals in the seawater column by shadowscopy

Science.gov (United States)

Fuhrer, Mélanie; Aprin, Laurent; Le Floch, Stéphane; Slangen, Pierre; Dusserre, Gilles

2012-10-01

Ninety percent of the Global Movement of Goods transit by ship. The transportation of HNS (Hazardous and Noxious Substances) in bulk highly increases with the tanker traffic. The huge volume capacities induce a major risk of accident involving chemicals. Among the latest accidents, many have led to vessels sinking (Ievoli Sun, 2000 - ECE, 2006). In case of floating substances, liquid release in depth entails an ascending two phase flow. The visualization of that flow is complex. Indeed, liquid chemicals have mostly a refractive index close to water, causing difficulties for the assessment of the two phase medium behavior. Several physics aspects are points of interest: droplets characterization (shape evolution and velocity), dissolution kinetics and hydrodynamic vortices. Previous works, presented in the 2010 Speckle conference in Brazil, employed Dynamic Speckle Interferometry to study Methyl Ethyl Ketone (MEK) dissolution in a 15 cm high and 1 cm thick water column. This paper deals with experiments achieved with the Cedre Experimental Column (CEC - 5 m high and 0.8 m in diameter). As the water thickness has been increased, Dynamic Speckle Interferometry results are improved by shadowscopic measurements. A laser diode is used to generate parallel light while high speed imaging records the products rising. Two measurements systems are placed at the bottom and the top of the CEC. The chemical class of pollutant like floaters, dissolvers (plume, trails or droplets) has been then identified. Physics of the two phase flow is presented and shows up the dependence on chemicals properties such as interfacial tension, viscosity and density. Furthermore, parallel light propagation through this disturbed medium has revealed trailing edges vortices for some substances (e.g. butanol) presenting low refractive index changes.

Health complaints among subjects involved in oil cleanup operations during oil spillage from a Greek tanker "Tasman Spirit".

Science.gov (United States)

Meo, Sultan Ayoub; Al-Drees, Abdul Majeed; Rasheed, Shahzad; Meo, Imran Mu; Al-Saadi, Muslim M; Ghani, Hamza A; Alkandari, Jasem Ramadan

2009-01-01

Oil spillage in the sea water is a disaster for marine life and humans in the vicinity. The study aimed at investigating health complaints among subjects involved in oil cleanup operations during a spillage from a Greek oil tanker "Tasman Spirit". The project was conducted under the supervision of the Department of Physiology, College of Medicine, King Khalid University Hospital, King Saud University, Riyadh, Saudi Arabia. The study concerned the respiratory and general health complaints in 50 apparently healthy, non-smoking male workers exposed to crude oil during oil cleanup operations. The exposed group was matched with a similar number of male, non-smoking controls. The health complaints were evaluated based on a comprehensive interview. The subjects involved in oil cleanup operations had significantly higher rates of health complaints including cough (38%), runny nose (36%), eye irritation/redness (32%), sore throat (28%), headache (28%), nausea (24%) and general illness (18%), compared to their matched controls. Air pollution due to crude oil spillage into sea water may cause respiratory and general health complaints in workers involved in oil cleanup operations.

Atlantic Canada : recipe for ruin, loophole in Canadian tanker laws questioned

International Nuclear Information System (INIS)

Reid, W.

2001-01-01

During a storm in December 2000, the captain of a leaking supertanker named the Eastern Power requested permission to dock his 339-metre ship at Come by Chance in Newfoundland. The request was denied by Transport Canada and the barge carrying 1.9 million barrels of oil had to ride out the storm just outside Canada's 200-mile limit. The concern was that the hull might split and spill huge amounts of oil. The Eastern Power has only one hull and is twice the age that the Prevention of Pollution from Ships considers reasonable for the lifespan of a vessel. Tankers built after 1993 are required to have an inside and an outside frame in order to enter Canadian waters. Those that are not double hulled and built before 1993 will be phased out by 2015. The spokesman for Transport Canada explained that the concern regarding the Eastern Power was for the Canadian environment. Owners are responsible for making sure that their ships do not risk our environment. An added precaution requires that all ships radio the Canadian Coast Guard 24 hours before reaching the 200-mile limit to report on their course, destination and seaworthiness. While Transport Canada makes the ultimate decision on entry, it shares the information with the Department of National Defense, Environment Canada and the coast guard. In this case, the crew of the Eastern Power was able to pump cargo into a safer tank and repaired the rupture. It was then given permission to dock at Come By Chance, but it instead headed for the Caribbean. Newfoundland is still recovering from the collapse of the cod fishery and is trying to build an eco-tourism industry given that its Atlantic offshore is a marine ecological treasure. Environmentalists view some of the present marine laws, or lack of laws, as a gateway to a disaster which could wipe out some water fowl species and further reduce fish stocks. 1 fig

Actual situation investigation utilizing a crude oil tanker for the air pollution in the Persion Gulf due to Kuwaiti oil field fire. Gen'yu tanker wo riyoshita Kuwait yusei kasai ni yoru Perushawan no taiki osen no jittai chosa

Energy Technology Data Exchange (ETDEWEB)

Tanaka, S. (Keio University, Tokyo (Japan). Faculty of Science and Technology)

1992-01-10

Very serious air pollution was brought about by the fire in oil fields at the end of February, 1991 after the Middle East Gulf War had come to an end. The present report explained the investigation result of actual air pollution situation obtained through measurement by implements mounted on board of the Japan Violet, crude oil tanker which made navigation in the Persian Gulf from 17 to 29 August, 1991. Non-marine salinity sulfate and nitrate in the dust particulates which are representative substances for the air pollution were 10.5 and 3.7[mu]g/m[sup 3], respectively in mean atmospheric content. Such a content level was nearly equal to that in the air-polluted land area and very high for the offshore air. It is judged to be resultant from the particulate formation of non-marine salinity salt from SO2 and NOx which were abundantly emitted, dispersed in the Persian Gulf and oxidized. However as a result of the neutralization by Ca contained in high content sanddust in the atmosphere of the Persian Golf, the acidity of sanddust was not so high. 7 refs., 8 figs., 1 tab.

First Stabilization and Disposal of Radioactive Zinc Bromide at the SRS

International Nuclear Information System (INIS)

Denny, J.K.

2003-01-01

Facilities Disposition Projects (FDP) personnel at Savannah River Site (SRS) implement the Inactive Facility Risk Management Program to drive down risk and costs in SRS inactive facilities. The program includes cost-effective techniques to identify and dispose of hazardous chemicals and radioactive waste from inactive facilities, thereby ensuring adequate protection of the public, workers and the environment. In June 1998, FDP conducted an assessment of the inactive C-Reactor Facility to assure that chemical and radiological hazards had been identified and were being safely managed. The walkdown identified the need to mitigate a significant hazard associated with storing approximately 13,400 gallons of liquid radioactive Zinc Bromide in three aging railcar tankers outside of the facility. No preventive maintenance was being performed on the rusting tankers and a leak could send radioactive Zinc Bromide into an outfall and offsite to the Savannah River. In 2001, DOE-Savannah River (DOE- SR) funded the FDP to eliminate the identified hazard by disposing of the radioactive Zinc Bromide solution and the three contaminated railcar tankers. This paper describes the innovative, cost-effective approaches and technology used to perform the first stabilization and disposal of radioactive Zinc Bromide at SRS

Application of Bayesian Belief networks to the human reliability analysis of an oil tanker operation focusing on collision accidents

International Nuclear Information System (INIS)

Martins, Marcelo Ramos; Maturana, Marcos Coelho

2013-01-01

During the last three decades, several techniques have been developed for the quantitative study of human reliability. In the 1980s, techniques were developed to model systems by means of binary trees, which did not allow for the representation of the context in which human actions occur. Thus, these techniques cannot model the representation of individuals, their interrelationships, and the dynamics of a system. These issues make the improvement of methods for Human Reliability Analysis (HRA) a pressing need. To eliminate or at least attenuate these limitations, some authors have proposed modeling systems using Bayesian Belief Networks (BBNs). The application of these tools is expected to address many of the deficiencies in current approaches to modeling human actions with binary trees. This paper presents a methodology based on BBN for analyzing human reliability and applies this method to the operation of an oil tanker, focusing on the risk of collision accidents. The obtained model was used to determine the most likely sequence of hazardous events and thus isolate critical activities in the operation of the ship to study Internal Factors (IFs), Skills, and Management and Organizational Factors (MOFs) that should receive more attention for risk reduction.

Evidence of Coal-Fly-Ash Toxic Chemical Geoengineering in the Troposphere: Consequences for Public Health.

Science.gov (United States)

Herndon, J Marvin

2015-08-11

The widespread, intentional and increasingly frequent chemical emplacement in the troposphere has gone unidentified and unremarked in the scientific literature for years. The author presents evidence that toxic coal combustion fly ash is the most likely aerosolized particulate sprayed by tanker-jets for geoengineering, weather-modification and climate-modification purposes and describes some of the multifold consequences on public health. Two methods are employed: (1) Comparison of 8 elements analyzed in rainwater, leached from aerosolized particulates, with corresponding elements leached into water from coal fly ash in published laboratory experiments, and (2) Comparison of 14 elements analyzed in dust collected outdoors on a high-efficiency particulate air (HEPA) filter with corresponding elements analyzed in un-leached coal fly ash material. The results show: (1) the assemblage of elements in rainwater and in the corresponding experimental leachate are essentially identical. At a 99% confidence interval, they have identical means (T-test) and identical variances (F-test); and (2) the assemblage of elements in the HEPA dust and in the corresponding average un-leached coal fly ash are likewise essentially identical. The consequences on public health are profound, including exposure to a variety of toxic heavy metals, radioactive elements, and neurologically-implicated chemically mobile aluminum released by body moisture in situ after inhalation or through transdermal induction.

Energy efficiency estimation of a steam powered LNG tanker using normal operating data

Directory of Open Access Journals (Sweden)

Sinha Rajendra Prasad

2016-01-01

Full Text Available A ship’s energy efficiency performance is generally estimated by conducting special sea trials of few hours under very controlled environmental conditions of calm sea, standard draft and optimum trim. This indicator is then used as the benchmark for future reference of the ship’s Energy Efficiency Performance (EEP. In practice, however, for greater part of operating life the ship operates in conditions which are far removed from original sea trial conditions and therefore comparing energy performance with benchmark performance indicator is not truly valid. In such situations a higher fuel consumption reading from the ship fuel meter may not be a true indicator of poor machinery performance or dirty underwater hull. Most likely, the reasons for higher fuel consumption may lie in factors other than the condition of hull and machinery, such as head wind, current, low load operations or incorrect trim [1]. Thus a better and more accurate approach to determine energy efficiency of the ship attributable only to main machinery and underwater hull condition will be to filter out the influence of all spurious and non-standard operating conditions from the ship’s fuel consumption [2]. The author in this paper identifies parameters of a suitable filter to be used on the daily report data of a typical LNG tanker of 33000 kW shaft power to remove effects of spurious and non-standard ship operations on its fuel consumption. The filtered daily report data has been then used to estimate actual fuel efficiency of the ship and compared with the sea trials benchmark performance. Results obtained using data filter show closer agreement with the benchmark EEP than obtained from the monthly mini trials . The data filtering method proposed in this paper has the advantage of using the actual operational data of the ship and thus saving cost of conducting special sea trials to estimate ship EEP. The agreement between estimated results and special sea trials EEP is

Assessment of quality of drinking water in Amasaman, Accra (Ghana)

International Nuclear Information System (INIS)

Quarcoo, G.; Hodgson, I. O. A.; Ampofo, J. A.; Cobbina, S. J.; Koku, J. E.

2014-01-01

The physico-chemical and microbial quality attributes of untreated water samples from hand dug wells and treated water delivered by tankers (mobile services) were assessed to determine the susceptibility of Amasaman community to water borne diseases. The physico-chemical parameters of all the water sources for domestic use were within the World Health Organization (WHO) drinking water guidelines and Ghana Standards (GS), with the exception of turbidity and colour which showed higher values for the well waters. With respect to the microbial quality, the waters from the hand-dug wells and tanker services showed presence of both total and faecal coliforms, at levels higher than WHO and GS values of zero counts per 100 mL for drinking water. The poor microbial quality (presence of coliform bacteria) of all the water samples suggested susceptibility and exposure of the community to waterborne diseases on continuously drinking the available water. (au)

International Clean Energy System Using Hydrogen Conversion (WE-NET). subtask 5. Development of hydrogen transport/storage technology (development of tanker for liquid hydrogen); Suiso riyo kokusai clean energy system gijutsu (WE-NET). subtask 5. Suiso yuso chozo gijutsu no kaihatsu (ekitai suiso yuso tanker no kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

As a part of the WE-NET project, the tanker for liquid hydrogen transport was studied. In fiscal 1996, some experiments and numerical analyses were proposed which are necessary to solve technological issues extracted in fiscal 1995 for heat insulation structure. The issue was roughly classified into vacuum and non-vacuum insulation, and their basic functions and required performance were arranged. Boil-off rate of 0.2-0.4%/d was targeted. The insulation system which applies polyurethane form (PUF) to tank surfaces and injects atmospheric N2 gas into the surrounding hold space, could achieve the targeted insulation performance by PUF of 1m in thickness. The system of vacuum panel insulation and atmospheric N2 gas injection into a hold space required the panel of 500mm in thickness because of the large effect of metallic outer panel material. The system of vacuum hold and PUF panels was faced with the essential issue for realizing and maintaining vacuum hold. The super insulation system featured by layered insulation materials and vacuum layer spaces was also strongly affected by degree of vacuum. 23 figs., 8 tabs.

Changes in the chemical composition of the light crude by short-term weathering

International Nuclear Information System (INIS)

Luo, X.; Ma, Q.M.

2006-01-01

In the event of an oil spill, it is important to unambiguously identify the oil and link it to the known source in order to determine environmental impact and legal liability. The fate and behaviour of spilled oil depends on several physical, chemical and biological factors such as evaporation, dissolution, microbial degradation and photooxidation. The chemical composition of the spilled oil changes with weathering. The changes can have a significant effect on the oil's toxicity and can add to the difficulty of identifying spilled oil. This paper presents the results of changes in chemical composition of light crude oil by weathering under natural environmental conditions. Oil samples were analyzed on a gas chromatograph equipped with a mass selective detector. Light crude oil was obtained from the oil cabin of a tanker which spilled oil near the Dalian Sea near China in April 2005. It was shown that the saturated hydrocarbons of light crude oil distribute between n-C 8 and n-C 23 . The most abundant n-alkanes are found in the n-C 10 to n-C 16 . The main chemical compositions of the light crude oil are the n-alkanes and the isoprenoids. The aromatic compounds are subordinate chemical compositions of the light crude oil. A simulated weathering experiment showed that less than n-C 12 of the n-alkanes, toluene, 1,3-dimethyl benzene is lost after 1 day of weathering. The n-C 13 , n-C 14 , naphthalene and 2-methyl-naphthalene are lost on the fifth day of weathering. N-C 15 alkane composition indicates some weatherproof capability. The ratios of n-C 17 /pristine and n-C 18 /phytane were unchanged and useful in identifying the source of the light crude oil during the first 8-day weathering period. By the twenty-first day of weathering, the chemical composition underwent extreme alteration, and the source of the pollution could not be determined by the ratios of pristine/phytane. 12 refs., 3 tabs., 7 figs

The Use of Simulators in Rules of the Road Training

Science.gov (United States)

2013-12-01

RoAoLMSR s llil>oal yacht s llil>oal yacht Tanker132k Tanker132k T anker!IO< Tug Barge Pushing Sand Tug Barge Pushing Sand on Starbo ... I 40...Boat Pilot Vessel Powe1Boat Cabin Cruiser Sailboat Yacht Sailboat Yacht Smoke Float Smoke Float Smoke Float Smoke Float Tanker 132k Tanker...2 Sailboat Yacht Smoke Float 2 Smoke Float 3 Smoke Float 4 Tanker 132k 2 Tanker 40k Tanker BOk T onker lnlond 2 Trawling trawling 2 Tug3

Evidence of Coal-Fly-Ash Toxic Chemical Geoengineering in the Troposphere: Consequences for Public Health

Directory of Open Access Journals (Sweden)

J. Marvin Herndon

2015-08-01

Full Text Available The widespread, intentional and increasingly frequent chemical emplacement in the troposphere has gone unidentified and unremarked in the scientific literature for years. The author presents evidence that toxic coal combustion fly ash is the most likely aerosolized particulate sprayed by tanker-jets for geoengineering, weather-modification and climate-modification purposes and describes some of the multifold consequences on public health. Two methods are employed: (1 Comparison of 8 elements analyzed in rainwater, leached from aerosolized particulates, with corresponding elements leached into water from coal fly ash in published laboratory experiments, and (2 Comparison of 14 elements analyzed in dust collected outdoors on a high-efficiency particulate air (HEPA filter with corresponding elements analyzed in un-leached coal fly ash material. The results show: (1 the assemblage of elements in rainwater and in the corresponding experimental leachate are essentially identical. At a 99% confidence interval, they have identical means (T-test and identical variances (F-test; and (2 the assemblage of elements in the HEPA dust and in the corresponding average un-leached coal fly ash are likewise essentially identical. The consequences on public health are profound, including exposure to a variety of toxic heavy metals, radioactive elements, and neurologically-implicated chemically mobile aluminum released by body moisture in situ after inhalation or through transdermal induction.

An Optimization Model For Strategy Decision Support to Select Kind of CPO’s Ship

Science.gov (United States)

Suaibah Nst, Siti; Nababan, Esther; Mawengkang, Herman

2018-01-01

The selection of marine transport for the distribution of crude palm oil (CPO) is one of strategy that can be considered in reducing cost of transport. The cost of CPO’s transport from one area to CPO’s factory located at the port of destination may affect the level of CPO’s prices and the number of demands. In order to maintain the availability of CPO a strategy is required to minimize the cost of transporting. In this study, the strategy used to select kind of charter ships as barge or chemical tanker. This study aims to determine an optimization model for strategy decision support in selecting kind of CPO’s ship by minimizing costs of transport. The select of ship was done randomly, so that two-stage stochastic programming model was used to select the kind of ship. Model can help decision makers to select either barge or chemical tanker to distribute CPO.

The oil spill modelling in the Sea of Japan: application to the tanker 'Nakhodka' 1997 incident

International Nuclear Information System (INIS)

Varlamov, S.M.; Yoon, J.-H.; Hirose, N.; Kawamura, H.

1998-01-01

In January 1997 the Russian tanker 'NAKHODKA' spilled into the Sea of Japan about 5000 tons of heavy fuel oil type C. Most of it reached the coast of Japan and damaged the environment. This incident forced the development of the operational system for the prediction of oil spills in the Sea of Japan. As a part of this system the model for oil spill modelling is presented. The modelled climatological sea currents were used in these simulators, generated by the three-dimensional primitive ocean circulation model with 10-minute horizontal resolution and 19 vertical levels. The model was forced by climatological atmospheric winds and heat fluxes. The wind currents in the upper sea layer were estimated by the wind data of ECMWF with 6 hours time and 0.5625-degree spatial resolution. The vertical structure of the total currents was interpolated using both wind driven currents and the climatological model currents data at the model levels. The oil spill was modelled with the particle tracking techniques. The model included the advection by currents, random diffusion, the buoyancy effect and the parameterisation of oil evaporation, biodegradation and beaching. For the deep sea the parameterisation of diffusion depends from the stratification, taken from the ocean circulation model output. The results demonstrated the defined relation with the observed propagation of the oil along the coast of Japan and highlighted the most important directions for the model development. The main is the realisation of the model for the real-time simulations and forecasts of the ocean currents with the fine resolution in the upper layer of the Sea of Japan. (author)

Experiment in democracy: The citizen oversight council as a means of mitigating environmental impacts of terminal and tanker operations

International Nuclear Information System (INIS)

Ginsburg, P.; Sterling, S.; Gottehrer, S.

1993-01-01

In 1987, a handful of people from the small fishing community of Cordova, Alaska, coalesced around concern over the risks of oil-related pollution and oil spills in Prince William Sound posed by the trans-Alaska pipeline terminal and tanker operations in neighboring Valdez. The Cordova group sent an emissary to Alyeska Pipeline Service Company, which operates the Valdez Marine Terminal on behalf of its seven oil company owners. The emissary asked Alyeska to consider forming a citizen group to advise Alyeska on environmental issues of local or regional concern. Alyeska listened but rejected the idea. In March 1989, the Exxon Valdez ran aground on Bligh Reef. Alyeska's owners, acting principally at the behest of majority owner, British Petroleum, soon effected sweeping change in Alyeska's management. The change in management, with Jim Hermiller as president, produced a change in Alyeska's attitude toward the citizen advisory group proposal, and not long afterward Alyeska formed the Alyeska Citizen Advisory Committee. Over the next year that group evolved into what is now called the Prince William Sound Regional Citizens' Advisory Council, or RCAC. The Prince William Sound Regional Citizens' Advisory Council is a national experiment in providing citizens a voice in corporate decisions that affect them and their communities. This paper recounts the story of RCAC's formation and evolution, the group's mission under both federal law and its contract with Alyeska, and the hallmarks of its achievements and challenges to date

Chemical fingerprinting applied to the evaluation of marine oil pollution in the coasts of Canary Islands (Spain).

Science.gov (United States)

Peña-Méndez, E M; Astorga-España, M S; García-Montelongo, F J

2001-01-01

Chemical fingerprinting approach to environmental assessment is illustrated in the evaluation of marine oil pollution in the coasts using two limpet species as bioindicator organisms, and based on profiles and concentrations of n-alkanes and aromatic hydrocarbons in their tissues. Accidental and chronic releases of hydrocarbons can contaminate the marine environment of the Canary Islands not only because of their geographical situation but also because of the very dense tanker traffic around. This situation affects coastal areas, fishing activities, tourism resort, etc. Concentrations of n-alkanes and aromatic hydrocarbons (polycyclic aromatic hydrocarbons and methyl-polycyclic aromatic hydrocarbons) in the soft tissues of the marine intertidal and subtidal limpets, Patella crenata and Patella ullysiponensis aspera, were evaluated. Limpet samples were collected at monthly intervals, at three locations on the southeast coast of Tenerife over a 3-year period (1991-93). Levels of hydrocarbons found in limpets are similar to concentrations found in unpolluted areas around the world. From application of principal component analysis, the interpretation of variable loading plots gives information on variable correlation and can be used to distinguish among potential sources of pollution and the ability of studied molluscs to be used as bioindicator organisms.

Tanks and Tank Troops

Science.gov (United States)

1982-03-01

dis- tance of up to 1,200 meters in moonlight . Effective range is substantially reduced with weaker starlight. Night vision devices with...by purification treatment and employment of corrosion inhibitors; by applying protective films to the vulnerable surface (chemically passive, oil...elaborated dynamic stereotype , tanker efficiency Improves, as do march performance Indicators. The duration of this period Is approximately 24 hours

Method and system for offshore production of liquefied natural gas; Fremgangsmaate og system for fremstilling av flytendegjort naturgass til havs

Energy Technology Data Exchange (ETDEWEB)

Breivik, K.G.; Fredheim, A.O.; Paurola, P.

1996-10-14

The invention relates to an method and a system for offshore production of liquefied natural gas, wherein natural gas is supplied from an underground source to a field installation for gas treatment. The gas is transferred in compressed form from the field installation to an LNG tanker, the transfer taking place via a pipeline surrounded by sea water, and the compressed gas being supplied to a conversion plant which is provided on the LNG tanker and is arranged to convert at least a part of the gas to liquefied form, and the liquefied gas being transferred to storage tanks on board the tanker. When the storage tanks on the LNG tanker are filled up, the pipeline is disconnected from the LNG tanker and connected to another, similar tanker, the pipeline being permanently connected to a submerged buoy which is arranged for introduction and releasable securement in a submerged downwardly open receiving space in the tanker, and which is provided with a swivel unit for transfer of gas under a high pressure. 3 figs.

Trends in CO2 Emissions from China-Oriented International Marine Transportation Activities and Policy Implications

Directory of Open Access Journals (Sweden)

Hualong Yang

2017-07-01

Full Text Available The demand for marine transportation and its associated CO2 emissions are growing rapidly as a result of increasing international trade and economic growth. An activity-based approach is developed for forecasting CO2 emissions from the China-oriented international seaborne trade sector. To accurately estimate the aggregated emissions, CO2 emissions are calculated individually for five categories of vessels: crude oil tanker, product tanker, chemical tanker, bulk carrier, and container. A business-as-usual (BAU scenario was developed to describe the current situation without additional mitigation policies, whilst three alternative scenarios were developed to describe scenarios with various accelerated improvements of the key factors. The aggregated CO2 emissions are predicted to reach 419.97 Mt under the BAU scenario, and 258.47 Mt under the optimal case, AD3. These predictions are 4.5 times and 2.8 times that of the aggregated emissions in 2007. Our analysis suggests that regulations for monitoring, reporting, and verifying the activities of vessels should be proposed, in order to quantify the CO2 emissions of marine transportation activities in Chinese territorial waters. In the long-term future, mitigation policies should be employed to reduce CO2 emissions from the marine trade sector and to address the climatic impact of shipping.

The impact of kidney foundations in alleviating the burden of CKD in India - an example, Tamilnad Kidney Research Foundation.

Science.gov (United States)

Abraham, Georgi; Vijayan, Madhusudan; Ravi, Rajalakshmi; Kumaraswami, Latha; Venkatesan, Malathy

Chronic kidney disease (CKD) is a major public health problem in India. The CKD registry of India has been formed to understand the epidemiology of CKD in India. Due to health economics in India, the majority of CKD-affected patients cannot afford renal replacement therapy (RRT) services. There is an unmet need to improve the awareness of kidney disease in India, and the focus should be on prevention and early detection of CKD by screening high risk populations. The Tamilnad Kidney Research (TANKER) Foundation is a charitable trust established in 1993 with the aim to improve awareness and provide quality affordable treatment to underprivileged patients. TANKER is supported by contributions from well-wishers. It has three arms: i) treatment arm, ii) research arm, and iii) awareness and screening arm. TANKER Foundation offers free and subsidized dialysis twice weekly to 227 underprivileged patients. TANKER dialysis has been supported by state government funding schemes. TANKER actively supports and conducts research in nephrology. More than 100,000 people have benefitted from TANKER's kidney awareness programs. The screening programs have provided for early detection of CKD in both urban and rural areas. TANKER award functions are held annually to recognize research and exemplary service to society. The TANKER Foundation can be used as a model for developing countries to address the unmet needs in CKD management.

Production and characterization of ceramic composite Al{sub 2}O{sub 3}-TiO{sub 2} reinforced with Y{sub 2}O{sub 3} and its stability in crude oil for internal coating of petroleum tankers; Producao e caracterizacao de compositos ceramicos Al{sub 2}O{sub 3}-TiO{sub 2} reforcado com Y{sub 2}O{sub 3} e sua estabilidade em petroleo cru para revestimento interno de navios petroleiros

Energy Technology Data Exchange (ETDEWEB)

Yadava, Y.P.; David, N.R.; Sanguinetti Ferreira, R.A.; Shinohara, A.H., E-mail: yadava@ufpe.br, E-mail: natielle.ramos@hotmail.com [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Departamento de Engenharia Mecanica

2014-07-01

The internal surfaces of crude petroleum tankers are subjected to corrosive environments, therefore it is of great importance to research coatings for the protection of those structures. Ceramic materials generally exhibit characteristic chemical inertness and are shown as material option for this application. In this study alumina-titania ceramic composites have been produced and reinforced with yttria. These composites were produced by thermo-mechanical process, sintered at 1350 ° C for 24 hours, and left to cool down in the oven. The structural and microstructural characterization of the sintered material was tested by X-ray diffraction and scanning electron microscopy. And its mechanical property was studied by Vickers microhardness test. After this characterization, the samples underwent a stability test where they were immersed in crude oil at room temperature for 60 days, during which were periodically subjected to tests related to stability, which was found found that the material was free from cracks, fissures or fractures, presenting for these reasons characteristics of inertia when subjected to crude oil environment. (author)

8 CFR 258.2 - Exceptions.

Science.gov (United States)

2010-01-01

... longshore work at any United States port under the exceptions provided for in paragraphs (a)(2), (b), or (c... hazardous dry bulk cargo. (i) All tankers qualify for the hazardous cargo exception, including parcel tankers, except for a tanker that has been gas-freed to transport non-hazardous dry bulk commodities. (ii...

Analysis on tank truck accidents involved in road hazardous materials transportation in china.

Science.gov (United States)

Shen, Xiaoyan; Yan, Ying; Li, Xiaonan; Xie, Chenjiang; Wang, Lihua

2014-01-01

Due to the sheer size and capacity of the tanker and the properties of cargo transported in the tank, hazmat tanker accidents are more disastrous than other types of vehicle accidents. The aim of this study was to provide a current survey on the situation of accidents involving tankers transporting hazardous materials in China. Detailed descriptions of 708 tanker accidents associated with hazmat transportation in China from 2004 to 2011 were analyzed to identify causes, location, types, time of occurrence, hazard class for materials involved, consequences, and the corresponding probability. Hazmat tanker accidents mainly occurred in eastern (38.1%) and southwest China (12.3%). The most frequent hazmat tanker accidents involved classes 2, 3, and 8. The predominant accident types were rollover (29.10%), run-off-the-road (16.67%), and rear-end collisions (13.28%), with a high likelihood of a large spill occurring. About 55.93% of the accidents occurred on freeways and class 1 roads, with the spill percentage reaching 75.00% and the proportion of spills that occurred in the total accidents amounting to 77.82%, of which 61.72% are considered large spills. The month with the highest accident probability was July (12.29%), and most crashes occurred during the early morning (4:00-6:00 a.m.) and midday (10:00 a.m.-12:00 p.m.) hours, 19.63% versus 16.10%. Human-related errors (73.8%) and vehicle-related defects (19.6%) were the primary reasons for hazmat tanker crashes. The most common outcomes of a hazmat tanker accident was a spill without further events (55.51%), followed by a release with fire (7.77%), and release with an explosion (2.54%). The safety situation of China's hazmat tanker transportation is grim. Such accidents not only have high spill percentages and consistently large spills but they can also cause serious consequences, such as fires and explosions. Improving the training of drivers and the quality of vehicles, deploying roll stability aids, enhancing

Fiscal 1997 survey report. Subtask 5 (hydrogen utilization worldwide clean energy system technology) (WE-NET) (development of hydrogen transportation/storage technology. 2. development of the liquid hydrogen transportation tanker); 1997 nendo seika hokokusho. Suiso riyo kokusai clean energy system gijutsu (WE-NET) subtask 5 suiso yuso chozo gijutsu no kaihatsu dai 2 hen ekitai suiso yuso tanker no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Technology development is being conducted for construction of the long distance transportation tanker of large quantity liquid hydrogen. In fiscal 1997, test pieces of thermal insulating materials to be planned for fiscal 1998 were designed and studied. The purpose of the test is to confirm thermal insulating performance and behaviors of each material under the temperature of liquid hydrogen. The inside of the outer tank of the experimental equipment was held at vacuum of 10{sup -6} to 10{sup -7} Torr to exclude thermal convection effects and evaluate only heat coming from heater through the test piece. The heat from the heater at the lower part of the test piece is through the test piece and makes the liquid hydrogen of the upper tank evaporate. Thermal conductivity of the test piece is calculated from the evaporation quantity. As to PUF (polyurethane foam) panels, studied were reformation preventive measures, influential evaluation of the side transfer heat quantity, and the time required for vacuuming. In the vacuum panel, study subjects were extracted on the selection of core materials, reformation preventive measures, deterioration with age, the practical manufacturing method of experimental panels, etc. As to the super insulation, subjects were studied on the performance measuring method/accuracy, measures against heat transfer from the inside of the experimental equipment, control of the vacuum degree, etc. 10 refs., 45 figs., 6 tabs.

78 FR 11950 - Identification of Entities and Vessels Pursuant to the Iranian Transactions and Sanctions...

Science.gov (United States)

2013-02-20

...; Telephone (356)(21241232) [IRAN] Linked To: NATIONAL IRANIAN TANKER COMPANY. 42. SINA SHIPPING COMPANY...; MMSI 572449210 (vessel) [IRAN] Linked To: NATIONAL IRANIAN TANKER COMPANY. 93. SINA (9HNY9) Crude Oil...

Physical, chemical and biological observations and modeling of oil spills in the Mediterranean Sea

Science.gov (United States)

Ribotti, A.; De Dominicis, M.

2016-11-01

According to a definition of GESAMP, United Nations advisory body on scientific aspects of marine protection, a marine pollution is: "direct or indirect introduction by man of substances or energy into the marine environment … which results in such deleterious effects as harm to living resources, hazard to human health, hindrance to marine activities including fishing, impairment of water quality and reduction of marine attractions". The works presented in this Special Issue stem from the need to manage the problem of marine pollution. The categories of pollutants associated with the maritime traffic are mainly hydrocarbons and chemicals. Hydrocarbon is the oil in all its forms, including the crude oil, the fuel oil, the sludges, debris and other refined products (as defined by MARPOL 73/78 Annex I (MARPOL, 1978)). An oil spill is a release of a liquid petroleum hydrocarbon into the environment due to human activity, and is a form of pollution. The term often refers to marine oil spills, where oil is released into the open ocean or coastal waters. Oil spills include releases of crude oil from tankers, offshore platforms, drilling rigs and wells, as well as spills of refined petroleum products (such as gasoline, diesel) and their by-products, and heavier fuels used by large ships such as bunker fuel, or the spill of any oily refuse or waste oil. Oil spills can have devastating effects on the marine environment and can jeopardize the functional integrity of the marine ecosystem (seabirds populations, fish communities, and marine mammals), as reported in Jackson et al. (1989), Piatt and Anderson (1996), Peterson et al. (2003). While being toxic to marine life, the hydrocarbons are very difficult to clean up, and last for years in the sediment and marine environment. Discharge of cargo residues from bulk carries can pollute ports, waterways and oceans. In many instances vessels intentionally discharge illegal wastes despite foreign and domestic regulation prohibiting

Method and system for offshore production of liquefied natural gas; Fremgangsmaate og system for fremstilling av flytendegjort naturgass til havs

Energy Technology Data Exchange (ETDEWEB)

Breivik, K.G.; Fredheim, A.O.; Paurola, P.

1997-01-13

The invention concerns an method and system for offshore production of liquefied natural gas (LNG), wherein natural gas is supplied from an underground source to a subsea production plant. The gas is transferred under a high pressure directly from the production plant to an LNG tanker through a pipeline underwater causing the temperature of the high pressure gas to be lowered to a desired low temperature. This gas is supplied to a conversion plant provided on the LNG tanker and arranged for converting at least a part of the gas to liquid form, and the liquefied gas is transferred to storage tanks on board the same. When the storage tanks are filled up, the pipeline is disconnected from the LNG tanker and connected to another similar tanker. The pipeline is permanently connected to a submerged buoy which is arranged for introduction and releasable securement in a submerged downwardly open receiving space in the tanker, and which is provided with a swivel unit for transfer of gas under a high pressure. 3 figs.

What can a FabLab Community become?

DEFF Research Database (Denmark)

2017-01-01

Videoen handler om fablab managers i Fablab Berlin og deres tanker om fremtidige muligheder for Fablabs......Videoen handler om fablab managers i Fablab Berlin og deres tanker om fremtidige muligheder for Fablabs...

A logistics professional

International Nuclear Information System (INIS)

Jaeaeskelaeinen, A.

1998-01-01

Finland's oil, chemicals, and energy company, Neste, has achieved an enviable standard of logistics serving the markets around the Baltic Rim. Neste's safe and efficient transportation services are handled by its own fleet of tankers, time-chartered vessels, contract road tankers, and rail. Neste's terminals play an important part in the company's logistics network. The company operates four terminals of its own in Finland, and works with other oil companies at three of their terminals. Neste's own terminals are located at the company's refineries at Porvoo and Naantali, and at Kokkola and Kemi on the Gulf of Bothnia. Outside Finland the completion of a new terminal at Riga in Latvia, to enhance the logistics services provided to Neste's network of service stations and direct sales customers in the Baltic countries. This joins a terminal at Muuga near Tallinn in Estonia, which has been operational for some five years. Construction work began on a terminal in St. Petersburg in December 1997 to serve customers in the St. Petersburg and Vyborg areas. Completion is scheduled for autumn 1999

Comparing sediment quality in Spanish littoral areas affected by acute (Prestige, 2002) and chronic (Bay of Algeciras) oil spills

International Nuclear Information System (INIS)

Morales-Caselles, C.; Kalman, J.; Riba, I.; DelValls, T.A.

2007-01-01

The quality of sediments collected from two areas of the Spanish coast affected by different sources of contaminants has been compared in this study. The areas studied are the coast of Galicia affected by the oil spill from the tanker Prestige (November 2002) and the Gulf of Cadiz which suffers continuous inputs of contaminants from industries located in the area and from oil spills. Contamination by several chemicals (metals, PCBs and PAHs) that bind to sediments was analyzed, and two toxicity tests (Microtox[reg]) and amphipod 10-day bioassay) were conducted. PAHs were identified as the compounds responsible for the toxic effects. Results show differences between an acute impact related to the sinking of the tanker Prestige and the chronic impact associated with continuous oil spills associated with the maritime and industrial activities in the Bay of Algeciras, this being the most polluted part of the two coastal areas studied in this work. - Littoral sediments affected by low or moderated but continuous oil spills are more polluted than those affected by accidental oil spills such as the Prestige

Noget at feste for?

DEFF Research Database (Denmark)

Andersen, Svend

2014-01-01

Tendensen i dansk universitetspolitik diskuteres kritisk i lyset af Wilhelm von Humboldt og K.E. Løgstrups tanker.......Tendensen i dansk universitetspolitik diskuteres kritisk i lyset af Wilhelm von Humboldt og K.E. Løgstrups tanker....

An economic model for seaborne oil trade

OpenAIRE

Hong, Kian-Wah

1996-01-01

This thesis aims to provide some insights as to how oil prices and oil flows might vary with the carrying capacity of the tanker fleet as affected by political events. It provides an econometric analysis of tanker freight rates in the modern era and proposes a mathematical (quadratic) programming economic model that links the crude oil market to the supply elasticity of the world oil tanker fleet based on a competitive economy. The economic model can be considered as a version of the Walras-C...

Introduction to the marine transportation of bulk LNG and the design of LNG carriers

Energy Technology Data Exchange (ETDEWEB)

Wilson, J J

1974-03-01

The marine transportation of bulk LNG is expected to expand considerably in the near future to help supply the continuous and growing demand for energy predicted for the U.S., Japan, and Western Europe. The number of new LNG tankers required to provide for these markets is estimated to be at least 50 new 4.4 million ft/sup 3/ tankers by 1980. The standard LNG tanker size is expected to increase to 7.06 million ft/sup 3/ within 5 yr. In selecting a particular tanker system, prospective ship-owners may have to consider such factors as national and international subsidies, shipyard limitations, and the trend to build certain specialized tanker components in areas other than in the shipyard. This work separation could help reduce tanker construction cost and time--especially important when several ships are to be constructed. Containment techniques available for construction of the cargo tanks include the self-supporting and the integrated designs, with the most economical provided by systems carrying LNG as a bulk cargo slightly subcooled below its boiling temperature at near-atmospheric pressure. All designs must fulfill the requirements for maintaining the approved temperature over the entire hull structure, preventing excess heat leaks into the cargo, providing tight liquid containment of the cargo, controlling the conditions inside and outside, and providing the proper facilities for safe loading and unloading. Materials of construction range from a combination of various grades of mild steel for the hull to the highest grades of aluminum alloys and nickel steels for the tank areas. Insulation includes polyurethane foam, silicon-coated perlite, and balsa wood used with fiberglass, polyurethane foam, or mineral wool. The insulation materials and arrangement must be waterproof, fire-resistant, and suitable to withstand the forces imposed on them. Finally, the tankers must include the proper equipment for LNG handling, pumping, and boiloff control.

Bioremediation: A natural solution

International Nuclear Information System (INIS)

Hicks, B.N.; Caplan, J.A.

1993-01-01

Bioremediation is an attractive remediation alternative because most full-scale bioremediation projects involve cost-effective contaminant treatment on-site. Recently, large scale bioremediation projects have included cleanups of ocean tanker spills, land-based chemical spills, and leaking chemical and petroleum storage tanks. Contaminated matrices have included beaches, soils, groundwater, surface waters (i.e., pits, ponds, lagoons), process waste streams and grease traps. Bioremediation is especially cost-effective when both soil and groundwater matrices are impacted because one remediation treatment system can be design to treat both media simultaneously in place. The primary advantages of in situ bioremediation include: on-site destruction of contaminants; accelerated cleanup time; minimal disruption to operations; lower remediation costs; and reduction of future liability

33 CFR 155.1110 - Purpose and applicability.

Science.gov (United States)

2010-07-01

... response planning requirements for an owner or operator of a tanker loading cargo at a facility permitted... (CONTINUED) POLLUTION OIL OR HAZARDOUS MATERIAL POLLUTION PREVENTION REGULATIONS FOR VESSELS Additional Response Plan Requirements for Tankers Loading Cargo at a Facility Permitted Under the Trans-Alaska...

Evaluation of haematological, hepatic and renal functions of ...

African Journals Online (AJOL)

Method: Twenty-five tanker drivers' and fifteen control subjects were randomly selected based on the selection criteria of not smoking and working for minimum of 5 years as petroleum tanker driver. The liver, renal and haematological parameters were analyzed using automated clinical and haematological analyzers while ...

33 CFR 110.230 - Puget Sound Area, Wash.

Science.gov (United States)

2010-07-01

..., the following hierarchy will be applied for assignment of a berth: tankers conducting lightering operations, then loaded tankers, and then all other vessels. (ii) Tugs and oil barges using the Cap Sante and... the Captain of the Port. (5) Within the Anacortes General Anchorages, lightering operations shall only...

33 CFR 151.19 - International Oil Pollution Prevention (IOPP) Certificates.

Science.gov (United States)

2010-07-01

... International Oil Pollution Prevention (IOPP) Certificates. (a) Each U.S. oil tanker of 150 gross tons and above... Oil Pollution Prevention (IOPP) Certificate. (b) Each oil tanker of 150 gross tons and above and each... construction, equipment, fittings, or arrangements required by the pollution prevention requirements of parts...

33 CFR 148.5 - How are terms used in this subchapter defined?

Science.gov (United States)

2010-07-01

... anchored in calm water free of wind, current, or tide conditions that would cause the tanker to move. Hose... ocean bottom when the tanker is underway, anchored, or moored, and subject to actual wind, waves... submerged turret loading buoys that can pump oil or natural gas and that has one or more of the following...

High freight rates hinder oil markets' return to equilibrium

International Nuclear Information System (INIS)

Anon

2005-01-01

Hurricane damage to refineries in the US has created shortages of refined products there, boosting imports and sending freight rates across the Atlantic to record levels. The situation was made worse for a time by a strike at France's main oil terminals in the Mediterranean, which prevented some oil tankers from being rapidly redeployed to routes across the Atlantic. Worldscale (WS) rates for routes from the UK and Europe to the US Atlantic and Gulf Coasts rose well above WS500 for clean tonnage during October. High rates were nevertheless not simply confined to product tankers crossing the Atlantic. Rates for crude tankers to the US have also risen, and tightness has begun to appear in some other markets as well. The net result has been to slow down the movement of oil from regions of surplus to those of scarcity, depressing prices in the former and keeping them at high levels in the latter. Atlantic tanker markets look like remaining tight for the rest of the year and perhaps beyond. (author)

The LNG Industry - 2008

International Nuclear Information System (INIS)

2009-04-01

Estimates for the marketed production of natural gas in 2008 show a rise of about 3.4% over 2007. The share of LNG in the gas trade accounts for 27% of the total (excluding trade within the Former Soviet Union and United Arab Emirates). This annual report presents: 1 - LNG contracts and trade, 2 - Contracts concluded in 2008, 3 - LNG imports - Sources of imports - Quantities received in 2008, 4 - LNG tankers, 5 - Ships delivered, 6 - Tanker distribution, 7 - Liquefaction plants, 8 - re-gasification plants, 9 - Contracts in force in 2008, 10 - Spot and short term quantities received in 2008, 11 - Sea transportation routes, 12 - Liquefaction plants (table), 13 - re-gasification plants (table), 14 - Delivery date of the LNG tankers

The LNG Industry - 2009

International Nuclear Information System (INIS)

2010-04-01

Estimates for the marketed production of natural gas in 2009 show a decrease of about 3.9% over 2008. The share of LNG in the gas trade accounts for 30% of the total (excluding trade within the Former Soviet Union and United Arab Emirates). This annual report presents: 1 - LNG contracts and trade, 2 - Contracts concluded in 2009, 3 - LNG imports - Sources of imports - Quantities received in 2009, 4 - LNG tankers, 5 - Ships delivered, 6 - Tanker distribution, 7 - Liquefaction plants, 8 - re-gasification plants, 9 - Contracts in force in 2009, 10 - Spot and short term quantities received in 2009, 11 - Sea transportation routes, 12 - Liquefaction plants (table), 13 - re-gasification plants (table), 14 - Delivery date of the LNG tankers

The status of wastewater management in Shokuhieh industrial park (A case study of Qom province

Directory of Open Access Journals (Sweden)

Mohammad Fahiminia

2015-12-01

Full Text Available Background: Water resource management is a strategic issue in Qom city. Water scarcity is one of the most critical concerns of industrial estates. This study aimed to evaluate wastewater management in the Shokuhieh industrial park of Qom province in 2013. Methods: This is a descriptive cross-sectional study done by visiting the industrial units in person, completing questionnaires and analyzing the results. The questionnaire had 25 questions, including general information, the status of water supply, treatment and consumption, wastewater production, reuse or discharge of produced wastewater and the status of wastewater treatment and discharge of effluent. The industrial units evaluated were active with over 50 personnel and numbered 44 in total. Results: The water suppliers in the industries included network (70.5%, network and reverse osmosis (RO (22.5%, network and tanker (2.4% and tanker (4.6%. 63.63% of the industries had water treatment systems. 19.5% reused wastewater and 31.8% performed pretreatment before discharge of wastewater. The discharge sites of water treatment units’ effluent included the absorption well (17%, greenbelt (18% and sewer (65%. Discharge sites of sanitary wastewater in 50% of the industries was sewer and in 50%, it was absorption well. The discharge sites of processed wastewater was reuse (2%, sewer (52% and absorption well (46%. Discharge sites of exiting effluent from pretreatment units in the industrial park, included sewer (85.5%, transport by tanker (7.1% and absorption well (7.1%. The type of pretreatment process in 35.7% of the industries was chemical and in 64.3%, it was septic tank. Conclusion: The results of this study showed that pre-treatment is not done in most industries and wastewater reuse is performed in few industries. The main method of wastewater disposal in industries was by discharge into the sewer and absorbent well.

[Chemical weapons and chemical terrorism].

Science.gov (United States)

Nakamura, Katsumi

2005-10-01

Chemical Weapons are kind of Weapons of Mass Destruction (WMD). They were used large quantities in WWI. Historically, large quantities usage like WWI was not recorded, but small usage has appeared now and then. Chemical weapons are so called "Nuclear weapon for poor countrys" because it's very easy to produce/possession being possible. They are categorized (1) Nerve Agents, (2) Blister Agents, (3) Cyanide (blood) Agents, (4) Pulmonary Agents, (5) Incapacitating Agents (6) Tear Agents from the viewpoint of human body interaction. In 1997 the Chemical Weapons Convention has taken effect. It prohibits chemical weapons development/production, and Organization for the Prohibition of Chemical Weapons (OPCW) verification regime contributes to the chemical weapons disposal. But possibility of possession/use of weapons of mass destruction by terrorist group represented in one by Matsumoto and Tokyo Subway Sarin Attack, So new chemical terrorism countermeasures are necessary.

2013 Tanker Vessel Density

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

The Use of Chemical-Chemical Interaction and Chemical Structure to Identify New Candidate Chemicals Related to Lung Cancer.

Directory of Open Access Journals (Sweden)

Lei Chen

Full Text Available Lung cancer causes over one million deaths every year worldwide. However, prevention and treatment methods for this serious disease are limited. The identification of new chemicals related to lung cancer may aid in disease prevention and the design of more effective treatments. This study employed a weighted network, constructed using chemical-chemical interaction information, to identify new chemicals related to two types of lung cancer: non-small lung cancer and small-cell lung cancer. Then, a randomization test as well as chemical-chemical interaction and chemical structure information were utilized to make further selections. A final analysis of these new chemicals in the context of the current literature indicates that several chemicals are strongly linked to lung cancer.

The LNG Industry - 2007

International Nuclear Information System (INIS)

2008-04-01

Estimates for the marketed production of natural gas in 2007 show a rise of about 1.6% over 2006. The share of LNG in the gas trade accounts for almost 24% of the total. This annual report presents: 1 - LNG contracts and trade, 2 - Contracts concluded in 2007, 3 - LNG imports - Sources of imports - Quantities received in 2007, 4 - LNG tankers, 5 - 35 Ships delivered 10 2007, 6 - Tanker distribution, 7 - Liquefaction plants, 8 - re-gasification plants, 9 - Long-term and medium-term contracts in force in 2007, 10 - Spot and short term quantities received in 2007 by the importing countries from the exporting countries, 11 - Sea transportation routes, 12 - Liquefaction plants (table), 13 - re-gasification plants (table), 14 - Delivery date of the LNG tankers

An outline on the present state of oil pollution combating in Japan

International Nuclear Information System (INIS)

Kuwabara, K.

1992-01-01

Japan is an arcuate island nation extending for some 3,000 kilometers and lying east of the Asian Continent. It comprises four major bodies of land, Honshu, Shikoku, Kyushu and Hokkaido, plus approximately 4,000 smaller islands. As a nation lacking in natural resources, Japan is compelled to import many needed raw materials and depends on imports far more than any other advanced industrial country. Oil figures especially prominent among imports; of the 233,660,000 kiloliters of crude oil supplied domestically each year, as much as of 98.0 percent is imported. The geographical conditions of Japan, as well as those surrounding its natural resources, have made the nation's social and economic activities so highly dependent on shipping that narrow waterways are crowded with all types of vessels; including hugh tankers, freighters, fishing boats, etc. Particularly in Tokyo Bay, Ise Bay and Seto Inland Sea, where many large petrochemical complexes are scattered among surrounding areas and great amounts of not only crude oil, but also liquefied gas and chemical products are seaborne, it is most likely that vessels, including crude tankers, may run aground and collide with one another, causing large-scale oil spill incidents, when navigating the narrow and congested straits and waterways there

LCA of Chemicals and Chemical Products

DEFF Research Database (Denmark)

Fantke, Peter; Ernstoff, Alexi

2018-01-01

This chapter focuses on the application of Life Cycle Assessment (LCA) to evaluate the environmental performance of chemicals as well as of products and processes where chemicals play a key role. The life cycle stages of chemical products, such as pharmaceuticals drugs or plant protection products......, are discussed and differentiated into extraction of abiotic and biotic raw materials, chemical synthesis and processing, material processing, product manufacturing, professional or consumer product use, and finally end-of-life . LCA is discussed in relation to other chemicals management frameworks and concepts...... including risk assessment , green and sustainable chemistry , and chemical alternatives assessment. A large number of LCA studies focus on contrasting different feedstocks or chemical synthesis processes, thereby often conducting a cradle to (factory) gate assessment. While typically a large share...

A system for transportation of hydrocarbons at sea; System for transport av hydrokarboner til havs

Energy Technology Data Exchange (ETDEWEB)

Breivik, K.; Smedal, A.

1997-04-01

To exploit the offshore oil and gas fields economically it is important to use suitable methods and equipment for transporting the oil and gas to the landing sites. The present invention concerns a system for transportation of hydrocarbons to the landing sites. It consists of one or more loading buoys and a number of preferably conventional tankers and at least one offshore loading ship arranged to receive hydrocarbons from the loading buoy to which it is connected by means of a coupling device in the ship`s bow. The tankers have in their sterns arrangements to convey the fluid through flexible tubes from complementary arrangements in the bow of the loading ship. The loading ship and the tanker have a position reference system for mutual dynamical positioning. The entire operation of connecting the tubes and transferring the fluid flow takes place with both ships moving, at least at steerage way. The invention aims to provide efficient use of the expensive special ships that are needed to communicate with the loading buoys. Another aim is to reduce the need for expensive specialized equipment onboard both the loading ships and the tankers. 5 figs.

IMCO: Making the seas safer and cleaner

International Nuclear Information System (INIS)

1979-01-01

Since 1959, when the IMCO Assembly met for the first time, the Organization has had two main objectives: the introduction of measures designed to improve safety at sea and to prevent pollution of the sea from ships. But during its twenty-year history IMCO has also adopted a number of Conventions and other measures which are aimed specifically at tankers and the problem of pollution. The 1954 Oil Pollution Convention (for which IMCO became depositary in 1959) was the first major attempt by the maritime nations to curb the impact of oil pollution, but since then the problem has become even more serious today The amount of oil carried by sea has risen by 700 per cent in 20 years - to around 1,700 million tons. The world tanker fleet has increased from 37 million deadweight tons in 1954 to around 340 million deadweight tons today, and the size of the tankers themselves has also grown amazingly. The second Convention deals with liability of the ship or cargo owner for damage suffered as a result of an oil pollution casualty. The Convention is intended to ensure that adequate compensation is available to victims and places the liability for the damage on the shipowner. As a result, another Conference was convened by IMCO in 1971 which resulted in the adoption of a Convention establishing the International Fund for Compensation for Oil Pollution Damage The Convention came into force in 1978 and the Fund has now been established with its headquarters in London These three Conventions all deal with what one might call the legal aspects of oil pollution. But the continuing boom in the transportation of oil showed that more work needed to be done on the technical side as well: the scale of oil pollution was so great in some areas that there was serious concern for the marine environment, not only as a result of accidents but through normal tanker operations, notably the cleaning of cargo tanks. In 1973 a major conference was called to discuss the whole problem of marine

Alf Ross

DEFF Research Database (Denmark)

Ryberg, Jesper

En (overvejende) ny generation af akademikere møder og prøver Ross' tanker om emner som retfærdighed, demokrati, statsforfatningsret, ytringsfrihed, straf, erkendelsesteori, etik, logik, fri vilje og sygdom.......En (overvejende) ny generation af akademikere møder og prøver Ross' tanker om emner som retfærdighed, demokrati, statsforfatningsret, ytringsfrihed, straf, erkendelsesteori, etik, logik, fri vilje og sygdom....

Keskkonnavolinik viitas mürgile tankeri Probo Koala meeskonna veres / Rasmus Kagge

Index Scriptorium Estoniae

Kagge, Rasmus, 1977-

2006-01-01

Ilmunud ka: Postimees : na russkom jazõke 29. sept. lk. 2-3. Greenpeace'i aktivistide tahtel arestiti Paldiskis Panama lipu all sõitnud Kreeka tanker Probo Koala, mis oli Elevandiluurannikul põhjustanud mürgitusjuhtumeid. Eestisse kiirvisiidi teinud eurovoliniku Stavros Dimase andmetel on ka mürgilaeva meeskonna elud ohus, sest laevnikke ohustav kemikaal on benseeniühend. Prokuratuuri algatatud kriminaalmenetlusest. Lisa: Tanker Probo Koala

Aerial Refueling Boom/Receptacle Guide

Science.gov (United States)

2017-07-28

Collision Beacon 22 9.6.2 Tanker Identity Platform Illumination 22 9.6.3 Formation Lights 22 9.6.4 Tanker/Receiver Aircraft...unlatch the receptacle door lock system, mechanical, electrical or hydraulic. Some airplanes will have a master refuel switch which energizes the...some receiver aircraft, pulling the manual door control handle to the detented “DOOR OPEN” position will release the receptacle door lock and

Short communication: Microbial quality of raw milk following commercial long-distance hauling.

Science.gov (United States)

Darchuk, Emily M; Meunier-Goddik, Lisbeth; Waite-Cusic, Joy

2015-12-01

Hauling is a critical part of the commercial milk supply chain, yet very few studies have aimed to understand its effect on raw milk quality. This study focused on the effect of extended-duration tanker use during hauling on raw milk quality at a commercial facility. Standard tanker use [cleaned-in-place (CIP) once per 24h] served as a control and an incremental between-load water rinse with sanitizer treatment (RS) was evaluated to mitigate any effect from extended duration hauling. During this study, 1 commercial truck with 2 trailers was monitored for 10d. The truck collected milk at a large dairy farm, transported the milk to a manufacturing facility, and then returned to the same farm for a second load. Each round-trip journey took between 10 and 12h, allowing for 2 loads per 24-h use period. Following the second delivery, the truck was cleaned by CIP treatment starting a new treatment day. Producer samples were collected from the raw milk bulk tank on the farm before loading milk into the tanker. The same milk was sampled directly out of the tanker truck before unloading at the manufacturer. Effect on individual bacteria count, thermophilic spore count, and preliminary incubation count was quantified through common industry tests. Surface sponge swabs were also used to monitor tanker sanitation and the efficacy of cleaning treatments. Results did not identify a negative effect on raw milk quality due to extended duration hauling. Whereas the addition of RS did not provide any measurable quality benefits for the microbial milk quality, swab results demonstrated that the RS treatment was able to reduce surface bacteria in the tanker, although not to the same level as the full CIP treatment. Based on this study, current CIP practices for long distance milk hauling appear to be effective in mitigating any measurable effect on raw milk quality. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

The LNG Industry - 2005

International Nuclear Information System (INIS)

2006-04-01

First estimates for the marketed production of natural gas in 2005 show a rise of about 1.5 % over 2004. The share of LNG in the gas trade accounts for almost 21 % of the total. This annual report presents: 1 - LNG contracts and trade, 2 - Contracts concluded in 2005, 3 - LNG imports - Sources of imports - Quantities received in 2005 by the importing countries from the exporting countries, 4 - LNG tankers, 5 - 18 Ships delivered in 2005, 6 - Tanker distribution, 7 - Liquefaction plants, 8 - re-gasification plants, 9 - Long-term and medium-term contracts in force in 2005, 10 - Spot and short term quantities received in 2005 by the importing countries from the exporting countries, 11 - Sea transportation routes, 12 - Liquefaction plants (table), 13 - re-gasification plants (table), 14 - Delivery date of the LNG tankers

Hydrogen utilization international clean energy system technology (WE-NET). Subtask 5. Development of technology of hydrogen transportation/storage (3rd edition, development of liquid hydrogen storage equipment, report on results of Air Liquide); Suiso riyo kokusai clean energy system gijutsu (WE-NET). Subtask 5. Suiso yuso chozo gijutsu no kaihatsu (daisanpen ekitai suiso chozo setsubi no kaihatsu Air Liquide sha seika hokoku)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

In the fiscal 1995 study, items were searched which are keys to the design of a liquid hydrogen tanker of a capacity of 200,000m{sup 3}. Among those, the basic concepts were summarized which are necessary for the design of a liquid hydrogen tanker in terms of safety, and the extraporation of the existing low temperature technology into the large liquid hydrogen tank was studied. When adopting safety conditions of IGC Code applied to LNG to the liquid hydrogen tanker, it is necessary to limit the discharge amount of hydrogen to 3 kg/s. When considering safety at fire, for keeping safety of the same level as that of the LNG tanker, it is not appropriate to adopt the conventional vacuum insulation liquid hydrogen tank. In the fiscal 1995 study, 7 kinds of concept of the insulation structure were assumed, and it was concluded that BOR of 0.04-0.23/d was obtained. Also in fiscal 1996, the large liquid hydrogen tank was studied. For insulation of the large liquid hydrogen tank, the structure is most promising where AEROSIL bag or homogeneous AEROSIL is substituted for a forming heat insulating material of 4 design, but further study is needed for selection of the optimum heat insulating structure. 9 figs., 6 tabs.

The LNG Industry - 2004

International Nuclear Information System (INIS)

2005-04-01

First estimates for the marketed production of natural gas in 2004 show a rise of about 2 % over 2003. The share of LNG in the gas trade accounts for 21.9 % of the total. This annual report presents: 1 - LNG contracts and trade, 2 - Contracts concluded in 2004, 3 - LNG imports - Sources of imports - Quantities received in 2005 by the importing countries from the exporting countries, 4 - LNG tankers, 5 - 21 Ships delivered in 2004, 6 - Tanker distribution (at the end of 2004), 7 - Liquefaction plants, 8 - re-gasification plants, 9 - Long-term and medium-term contracts in force in 2004, 10 - Spot and short term quantities received in 2004 by the importing countries from the exporting countries, 11 - Sea transportation routes, 12 - Liquefaction plants (table), 13 - re-gasification plants (table), 14 - Delivery date of the LNG tankers

Validating a Model of Team Collaboration at the North American Aerospace Defense Command Using Selected Transcripts from September 11, 2001

Science.gov (United States)

2008-06-01

resources. When communications are more efficient, team performance benefits . Communication plays a critical role in a team’s ability to achieve...standard operating procedure (SOP) for NORAD/NEADS is classified and therefore not useful for this thesis. However, it would be of benefit for someone...1221 Speaker 13: Once you get the tanker you’ve bingo to Langley at 1830. COA 1222 Major N: Okay. They’re working tanker support from my

Chemical Peels

Science.gov (United States)

... care Kids’ zone Video library Find a dermatologist Chemical peels Overview Chemical peels: Overview Also called chemexfoliation , derma peeling Do ... Overview Chemical peels: FAQs Chemical peels: Preparation FAQs Chemical peels: FAQs To help you decide whether this ...

Accidental pollution in the ocean: besides crude oil, chemicals and other spills

International Nuclear Information System (INIS)

Marchand, M.

2003-01-01

Accidental pollution of the seas is usually illustrated by the shipwreck of tankers carrying crude oil. We must look beyond this image since such accidents spill substances other than petrochemicals. We need but mention the Levoli Sun's accident near the Cotentin peninsula, France, one year after the Erika went down. And what about spills of agricultural and food products? An accidental spill as apparently harmless as wheat might have serious effects on not just the environment but also human health. In all cases, two major series of questions crop up: 1) Is it necessary to intervene? If so, are we able to? And if we can, how to fight against spills? 2) What are the short- and long-term effects on the environment and on all human activities related to the sea (fishing, fish-farming, salt production, tourism, salt-water cures, etc.)? These two questions have a common denominator: the need to know how spilled products react. This knowledge conditions both the operational response for fighting against pollution and the assessment of the impact on the maritime environment. (author)

Effect of leaving milk trucks empty and idle for 6 h between raw milk loads.

Science.gov (United States)

Kuhn, Eva; Meunier-Goddik, Lisbeth; Waite-Cusic, Joy G

2018-02-01

The US Pasteurized Milk Ordinance (PMO) allows milk tanker trucks to be used repeatedly for 24 h before mandatory clean-in-place cleaning, but no specifications are given for the length of time a tanker can be empty between loads. We defined a worst-case hauling scenario as a hauling vessel left empty and dirty (idle) for extended periods between loads, especially in warm weather. Initial studies were conducted using 5-gallon milk cans (pilot-scale) as a proof-of-concept and to demonstrate that extended idle time intervals could contribute to compromised raw milk quality. Based on pilot-scale results, a commercial hauling study was conducted through partnership with a Pacific Northwest dairy co-op to verify that extended idle times of 6 h between loads have minimal influence on the microbiological populations and enzyme activity in subsequent loads of milk. Milk cans were used to haul raw milk (load 1), emptied, incubated at 30°C for 3, 6, 10, and 20 h, and refilled with commercially pasteurized whole milk (load 2) to measure cross-contamination. For the commercial-scale study, a single tanker was filled with milk from a farm known to have poorer quality milk (farm A, load 1), emptied, and refilled immediately (0 h) or after a delay (6 h) with milk from a farm known to have superior quality milk (farm B, load 2). In both experiments, milk samples were obtained from each farm's bulk tank and from the milk can or tanker before unloading. Each sample was microbiologically assessed for standard plate count (SPC), lactic acid bacteria (LAB), and coliform counts. Selected isolates were assessed for lipolytic and proteolytic activity using spirit blue agar and skim milk agar, respectively. The pilot-scale experiment effectively demonstrated that extended periods of idle (>3 h) of soiled hauling vessels can significantly affect the microbiological quality of raw milk in subsequent loads; however, extended idle times of 6 h or less would not measurably compromise milk

CHEMICALS

CERN Multimedia

Medical Service

2002-01-01

It is reminded that all persons who use chemicals must inform CERN's Chemistry Service (TIS-GS-GC) and the CERN Medical Service (TIS-ME). Information concerning their toxicity or other hazards as well as the necessary individual and collective protection measures will be provided by these two services. Users must be in possession of a material safety data sheet (MSDS) for each chemical used. These can be obtained by one of several means : the manufacturer of the chemical (legally obliged to supply an MSDS for each chemical delivered) ; CERN's Chemistry Service of the General Safety Group of TIS ; for chemicals and gases available in the CERN Stores the MSDS has been made available via EDH either in pdf format or else via a link to the supplier's web site. Training courses in chemical safety are available for registration via HR-TD. CERN Medical Service : TIS-ME :73186 or service.medical@cern.ch Chemistry Service : TIS-GS-GC : 78546

Book of abstracts Chemical Engineering: IV All-Russian Conference on chemical engineering, All-Russian Youth Conference on chemical engineering, All-Russian school on chemical engineering for young scientists and specialists. Chemical engineering of nanomaterials. Energy- and resource-saving chemical-engineering processes and problems of their intensification. Processes and apparatuses of chemical engineering, chemical cybernetics. Ecological problems of chemical engineering and related fields

International Nuclear Information System (INIS)

Zakhodyaeva, Yu.A.; Belova, V.V.

2012-01-01

In the given volume of abstracts of the IV All-Russian Conference on chemical engineering, All-Russian Youth Conference on chemical engineering, All-Russian school on chemical engineering for young scientists and specialists (Moscow, March 18-23, 2012) there are the abstracts of the reports concerning chemical engineering of nanomaterials, energy- and resource-saving chemical-engineering processes, processes and apparatuses of chemical engineering, chemical cybernetics, ecological problems of chemical engineering and related fields. The abstracts deal with state-of-the-art and future development of theoretical and experimental investigations as well as with experience in practical realization of development works in the field of chemical engineering and relative areas [ru

Savannah River Site offsite hazardous waste shipment data validation report. Revision 1

International Nuclear Information System (INIS)

Casey, C.; Kudera, D.E.; Page, L.A.; Rohe, M.J.

1995-05-01

The objective of this data validation is to verify that waste shipments reported in response to the US Department of Energy Headquarters data request are properly categorized according to DOE-HQ definitions. This report documents all findings and actions resulting from the independent review of the Savannah River Site data submittal, and provides a summary of the SRS data submittal and data validation strategy. The overall hazardous waste management and offsite release process from 1987--1991 is documented, along with an identification and description of the hazardous waste generation facilities. SRS did not ship any hazardous waste offsite before 1987. Sampling and analysis and surface surveying procedures and techniques used in determining offsite releasability of the shipments are also described in this report. SRS reported 150 manifested waste shipments from 1984 to 1991 that included 4,755 drums or lab packs and 13 tankers. Of these waste items, this report categorizes 4,251 as clean (including 12 tankers), 326 as likely clean, 138 as likely radioactive, and 55 as radioactive (including one tanker). Although outside the original scope of this report, 14 manifests from 1992 and 1993 are included, covering 393 drums or lab packs and seven tankers. From the 1992--1993 shipments, 58 drums or lab packs are categorized as radioactive and 16 drums are categorized as likely radioactive. The remainder are categorized as clean

Savannah River Site offsite hazardous waste shipment data validation report. Revision 1

Energy Technology Data Exchange (ETDEWEB)

Casey, C.; Kudera, D.E.; Page, L.A.; Rohe, M.J.

1995-05-01

The objective of this data validation is to verify that waste shipments reported in response to the US Department of Energy Headquarters data request are properly categorized according to DOE-HQ definitions. This report documents all findings and actions resulting from the independent review of the Savannah River Site data submittal, and provides a summary of the SRS data submittal and data validation strategy. The overall hazardous waste management and offsite release process from 1987--1991 is documented, along with an identification and description of the hazardous waste generation facilities. SRS did not ship any hazardous waste offsite before 1987. Sampling and analysis and surface surveying procedures and techniques used in determining offsite releasability of the shipments are also described in this report. SRS reported 150 manifested waste shipments from 1984 to 1991 that included 4,755 drums or lab packs and 13 tankers. Of these waste items, this report categorizes 4,251 as clean (including 12 tankers), 326 as likely clean, 138 as likely radioactive, and 55 as radioactive (including one tanker). Although outside the original scope of this report, 14 manifests from 1992 and 1993 are included, covering 393 drums or lab packs and seven tankers. From the 1992--1993 shipments, 58 drums or lab packs are categorized as radioactive and 16 drums are categorized as likely radioactive. The remainder are categorized as clean.

Chemical Emergencies

Science.gov (United States)

When a hazardous chemical has been released, it may harm people's health. Chemical releases can be unintentional, as in the case of an ... the case of a terrorist attack with a chemical weapon. Some hazardous chemicals have been developed by ...

Assessment of the effectiveness of the regulatory regime in controlling the effects of oil pollution on Kenya's coastal and marine environment.

OpenAIRE

Ohowa, Boaz Ogola

2004-01-01

The Kenya coast is part of the major tanker route that stretches along the East African coast, running from the Middle East round the Hom of Africa to other parts of the world. The major Kenyan port, Mombasa, handles a substantial number of ocean-going ships (including oil tankers) and other smaller vessels, in addition to having other installations that deal with oil such as refineries and power generators. This raises the prospect of chronic oil pollution in the coastal and marine environme...

An integrated multi-label classifier with chemical-chemical interactions for prediction of chemical toxicity effects.

Science.gov (United States)

Liu, Tao; Chen, Lei; Pan, Xiaoyong

2018-05-31

Chemical toxicity effect is one of the major reasons for declining candidate drugs. Detecting the toxicity effects of all chemicals can accelerate the procedures of drug discovery. However, it is time-consuming and expensive to identify the toxicity effects of a given chemical through traditional experiments. Designing quick, reliable and non-animal-involved computational methods is an alternative way. In this study, a novel integrated multi-label classifier was proposed. First, based on five types of chemical-chemical interactions retrieved from STITCH, each of which is derived from one aspect of chemicals, five individual classifiers were built. Then, several integrated classifiers were built by integrating some or all individual classifiers. By testing the integrated classifiers on a dataset with chemicals and their toxicity effects in Accelrys Toxicity database and non-toxic chemicals with their performance evaluated by jackknife test, an optimal integrated classifier was selected as the proposed classifier, which provided quite high prediction accuracies and wide applications. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Chemical profiling of chemical warfare agents for forensic purposes

NARCIS (Netherlands)

Noort, D.; Reuver, L.P.J. de; Fidder, A.; Tromp, M.; Verschraagen, M.

2010-01-01

A program has been initiated towards the chemical profiling of chemical warfare agents, in order to support forensic investigations towards synthesis routes, production sites and suspect chemical suppliers. Within the first stage of the project various chemical warfare agents (VX, sulfur mustard,

Oil spill hazard assessment using a reverse trajectory method for the Egadi marine protected area (Central Mediterranean Sea).

Science.gov (United States)

Ciappa, Achille; Costabile, Salvatore

2014-07-15

The Egadi Marine Protected Area (MPA) on the western side of the Sicily Channel (Central Mediterranean) is exposed to a high risk of oil pollution from the tanker routes connecting the eastern and western basins of the Mediterranean Sea. Areas where an oil spill would do most damage, and thus where surveillance should be concentrated, are identified in this study by Lagrangian tracers tracked backwards in time from points along the MPA perimeter using data spanning six years from 2006 to 2011. Results indicate that the areas where oil surveillance would be most beneficial are segments of the tanker routes south of Sicily (highly frequented) and north of Sicily (scarcely frequented), both extending about 150 miles from November to March and 100 miles in the other months. The third route, close to the Tunisian shore, is the most frequented by oil tankers but the threat period is limited to November and December. Copyright © 2014 Elsevier Ltd. All rights reserved.

Analysis of the effects of explosion of a hydrogen cylinder on the transfer of radioactive liquid wastes at nuclear power stations

International Nuclear Information System (INIS)

Lopes, Karina B.; Melo, Paulo Fernando F.F. e

2011-01-01

This work presents a study of explosion effects of a stored hydrogen cylinder on the transfer of radioactive liquid wastes at nuclear power plants. The peak overpressure is calculated, as well as the strength of resulting fragments, thus confirming the main harmful effect of an explosion of flammable vapor cloud, based on the TNT equivalent method. The scenarios identified are calculated and compared with the overpressure ranges of 1%, 50% and 99% of structural damages, which were determined by the Eisenberg's vulnerability model. The results show that the overpressure and the resulting fragments from the explosion of a hydrogen gas cylinder are not able to cause the overturning of the tanker under study, and also show that a minimum distance of 30 meters between the hydrogen cylinder and the tanker can be considered a safe distance to the passage of this tanker during the transfer of radioactive liquid waste, in which the likelihood of occurrence of structural damages is less than 1%. (author)

Identification of Chemical Toxicity Using Ontology Information of Chemicals

Directory of Open Access Journals (Sweden)

Zhanpeng Jiang

2015-01-01

Full Text Available With the advance of the combinatorial chemistry, a large number of synthetic compounds have surged. However, we have limited knowledge about them. On the other hand, the speed of designing new drugs is very slow. One of the key causes is the unacceptable toxicities of chemicals. If one can correctly identify the toxicity of chemicals, the unsuitable chemicals can be discarded in early stage, thereby accelerating the study of new drugs and reducing the R&D costs. In this study, a new prediction method was built for identification of chemical toxicities, which was based on ontology information of chemicals. By comparing to a previous method, our method is quite effective. We hope that the proposed method may give new insights to study chemical toxicity and other attributes of chemicals.

From Chemical Forces to Chemical Rates: A Historical/Philosophical Foundation for the Teaching of Chemical Equilibrium

Science.gov (United States)

Quilez, Juan

2009-01-01

With this paper, our main aim is to contribute to the realisation of the chemical reactivity concept, tracing the historical evolution of the concept of chemical affinity that eventually supported the concept of chemical equilibrium. We will concentrate on searching for the theoretical grounds of three key chemical equilibrium ideas: "incomplete…

Introduktion

DEFF Research Database (Denmark)

Thorup, Mikkel

2017-01-01

En introduktion til egen oversættelse af den amerikanske filosof John Deweys politiske hovedværk Offentligheden og dens problemer (The Public and its Problems), som både udlægger Deweys tanker og demokrati og diskuterer deres nutidige relevans.......En introduktion til egen oversættelse af den amerikanske filosof John Deweys politiske hovedværk Offentligheden og dens problemer (The Public and its Problems), som både udlægger Deweys tanker og demokrati og diskuterer deres nutidige relevans....

Household Chemical Emergencies

Science.gov (United States)

... Content Home Be Informed Household Chemical Emergencies Household Chemical Emergencies Although the risk of a chemical accident ... reduce the risk of injury. Before a Household Chemical Emergency It is critical to store household chemicals ...

SR-71B - in Flight with F-18 Chase Aircraft - View from Air Force Tanker

Science.gov (United States)

1996-01-01

NASA 831, an SR-71B operated by the Dryden Flight Research Center, Edwards, California, cruises over the Mojave Desert with an F/A-18 Hornet flying safety chase. They were photographed on a 1996 mission from an Air Force refueling tanker The F/A-18 Hornet is used primarily as a safety chase and support aircraft at Dryden. As support aircraft, the F-18s are used for safety chase, pilot proficiency and aerial photography. Two SR-71 aircraft have been used by NASA as testbeds for high-speed and high-altitude aeronautical research. The aircraft, an SR-71A and an SR-71B pilot trainer aircraft, have been based here at NASA's Dryden Flight Research Center, Edwards, California. They were transferred to NASA after the U.S. Air Force program was cancelled. As research platforms, the aircraft can cruise at Mach 3 for more than one hour. For thermal experiments, this can produce heat soak temperatures of over 600 degrees Fahrenheit (F). This operating environment makes these aircraft excellent platforms to carry out research and experiments in a variety of areas -- aerodynamics, propulsion, structures, thermal protection materials, high-speed and high-temperature instrumentation, atmospheric studies, and sonic boom characterization. The SR-71 was used in a program to study ways of reducing sonic booms or over pressures that are heard on the ground, much like sharp thunderclaps, when an aircraft exceeds the speed of sound. Data from this Sonic Boom Mitigation Study could eventually lead to aircraft designs that would reduce the 'peak' overpressures of sonic booms and minimize the startling affect they produce on the ground. One of the first major experiments to be flown in the NASA SR-71 program was a laser air data collection system. It used laser light instead of air pressure to produce airspeed and attitude reference data, such as angle of attack and sideslip, which are normally obtained with small tubes and vanes extending into the airstream. One of Dryden's SR-71s was used

chemical safety and chemical security overview

African Journals Online (AJOL)

IICBA01

Wafaa M. Abdou. Chemical Industries Division, National Research Centre, ... substances to attain an acceptably low risk of exposure. Security is: ... Sharing locations of chemicals can publicize targets for theft .... D. Personal Protective Equipments (PPE): ... E. Lighting & Noise Levels ... PPE. ➢ Autoclave or sterilize wastes.

Runaway chemical reaction exposes community to highly toxic chemicals

International Nuclear Information System (INIS)

Kaszniak, Mark; Vorderbrueggen, John

2008-01-01

The U.S. Chemical Safety and Hazard Investigation Board (CSB) conducted a comprehensive investigation of a runaway chemical reaction at MFG Chemical (MFG) in Dalton, Georgia on April 12, 2004 that resulted in the uncontrolled release of a large quantity of highly toxic and flammable allyl alcohol and allyl chloride into the community. Five people were hospitalized and 154 people required decontamination and treatment for exposure to the chemicals. This included police officers attempting to evacuate the community and ambulance personnel who responded to 911 calls from residents exposed to the chemicals. This paper presents the findings of the CSB report (U.S. Chemical Safety and Hazard Investigation Board (CSB), Investigation Report: Toxic Chemical Vapor Cloud Release, Report No. 2004-09-I-GA, Washington DC, April 2006) including a discussion on tolling practices; scale-up of batch reaction processes; Process Safety Management (PSM) and Risk Management Plan (RMP) implementation; emergency planning by the company, county and the city; and emergency response and mitigation actions taken during the incident. The reactive chemical testing and atmospheric dispersion modeling conducted by CSB after the incident and recommendations adopted by the Board are also discussed

TOVALOP and CRISTAL. 2. ed.

International Nuclear Information System (INIS)

1990-01-01

The Torrey Canyon incident in 1967 provided a major stimulus to the development of four international regimes (two voluntary agreements and two international conventions) through which compensation for pollution damage and clean-up costs is available following the escape or discharge of persistent oil from tankers. The two voluntary agreements were set up as a result of the determination of the tanker and oil industries to take constructive action, both to encourage prompt and effective clean-up and to assure adequate and timely compensation, prior to the widespread ratification and acceptance of the two international conventions. The voluntary agreements are the Tanker Owners Voluntary Agreement concerning Liability for Oil Pollution (TOVALOP) and the Contract Regarding a Supplement to Tanker Liability for Oil Pollution (CRISTAL). It should be emphasised from the outset that whilst both TOVALOP and CRISTAL are described as voluntary agreements, it is only the decision on whether or not to participate that is voluntary, since having become a party there is a contractual obligation to meet all the terms and conditions of the applicable agreement. This booklet provides a brief summary of TOVALOP and CRISTAL and their relation to the corresponding international conventions developed under the auspices of the International Maritime Organization (IMO), viz the International Convention on Civil Liability for Oil Pollution Damage, 1969 (CLC) and the International Convention on the Establishment of an International Fund for Compensation for Oil Pollution Damage, 1971 (Fund Convention). (author)

Chemical Function Predictions for Tox21 Chemicals

Data.gov (United States)

U.S. Environmental Protection Agency — Random forest chemical function predictions for Tox21 chemicals in personal care products uses and "other" uses. This dataset is associated with the following...

A Chemical Activity Approach to Exposure and Risk Assessment of Chemicals

DEFF Research Database (Denmark)

Gobas, Frank A. P. C.; Mayer, Philipp; Parkerton, Thomas F.

2018-01-01

activity approach, its strengths and limitations, and provides examples of how this concept may be applied to the management of single chemicals and chemical mixtures. The examples demonstrate that the chemical activity approach provides a useful framework for 1) compiling and evaluating exposure......To support the goals articulated in the vision for exposure and risk assessment in the twenty-first century, we highlight the application of a thermodynamic chemical activity approach for the exposure and risk assessment of chemicals in the environment. The present article describes the chemical...... assessment. The article further illustrates that the chemical activity approach can support an adaptive management strategy for environmental stewardship of chemicals where “safe” chemical activities are established based on toxicological studies and presented as guidelines for environmental quality...

Integrative Chemical-Biological Read-Across Approach for Chemical Hazard Classification

Science.gov (United States)

Low, Yen; Sedykh, Alexander; Fourches, Denis; Golbraikh, Alexander; Whelan, Maurice; Rusyn, Ivan; Tropsha, Alexander

2013-01-01

Traditional read-across approaches typically rely on the chemical similarity principle to predict chemical toxicity; however, the accuracy of such predictions is often inadequate due to the underlying complex mechanisms of toxicity. Here we report on the development of a hazard classification and visualization method that draws upon both chemical structural similarity and comparisons of biological responses to chemicals measured in multiple short-term assays (”biological” similarity). The Chemical-Biological Read-Across (CBRA) approach infers each compound's toxicity from those of both chemical and biological analogs whose similarities are determined by the Tanimoto coefficient. Classification accuracy of CBRA was compared to that of classical RA and other methods using chemical descriptors alone, or in combination with biological data. Different types of adverse effects (hepatotoxicity, hepatocarcinogenicity, mutagenicity, and acute lethality) were classified using several biological data types (gene expression profiling and cytotoxicity screening). CBRA-based hazard classification exhibited consistently high external classification accuracy and applicability to diverse chemicals. Transparency of the CBRA approach is aided by the use of radial plots that show the relative contribution of analogous chemical and biological neighbors. Identification of both chemical and biological features that give rise to the high accuracy of CBRA-based toxicity prediction facilitates mechanistic interpretation of the models. PMID:23848138

Chemical ecotoxicology

International Nuclear Information System (INIS)

Paasivirta, J.

1991-01-01

This book discusses risk assessment, chemical cycles, structure-activity relations, organohalogens, oil residues, mercury, sampling and analysis of trace chemicals, and emissions from the forestry industry. Topics include: Cycles of chemicals in the environment. Rick assessment and management, strucuture and toxicity, sampling and analysis of trace chemicals in environment, interpretation of the environmental analysis results, mercury in the environment, organohalogen compounds in the environment, emissions from forestry industry, oil residues in the environment: oil spills in the marine environment

Chemical composition of Chinese palm fruit and chemical properties ...

African Journals Online (AJOL)

... chemical properties and could be used as edible oils and for industrial applications. ... on it, which can provide useful information for Chinese oil palm industry. Key words: Chemical composition, palm fruit, palm oil, palm kernel oil, chemical ...

CAMEO Chemicals Software

Science.gov (United States)

CAMEO Chemicals is an extensive chemical database, available for download, with critical response information for thousands of chemicals, and a tool that tells you what reactions might occur if chemicals were mixed together.

Chemical systems, chemical contiguity and the emergence of life

DEFF Research Database (Denmark)

Kee, Terrence P.; Monnard, Pierre Alain

2017-01-01

to complex chemical systems over specific isolated functional apparatuses. We will summarize the recent advances in system chemistry and show that chemical systems in the geochemical context imply a form of chemical contiguity in the syntheses of the various molecules that precede modern biomolecules....

Capacitive chemical sensor

Science.gov (United States)

Manginell, Ronald P; Moorman, Matthew W; Wheeler, David R

2014-05-27

A microfabricated capacitive chemical sensor can be used as an autonomous chemical sensor or as an analyte-sensitive chemical preconcentrator in a larger microanalytical system. The capacitive chemical sensor detects changes in sensing film dielectric properties, such as the dielectric constant, conductivity, or dimensionality. These changes result from the interaction of a target analyte with the sensing film. This capability provides a low-power, self-heating chemical sensor suitable for remote and unattended sensing applications. The capacitive chemical sensor also enables a smart, analyte-sensitive chemical preconcentrator. After sorption of the sample by the sensing film, the film can be rapidly heated to release the sample for further analysis. Therefore, the capacitive chemical sensor can optimize the sample collection time prior to release to enable the rapid and accurate analysis of analytes by a microanalytical system.

Chemical Data Reporting Fact Sheet: Chemicals Snapshot

Science.gov (United States)

This fact sheet provides a brief overview of the chemical manufacturing, processing, and use information collected for the 2012 Chemical Data Reporting (CDR) rule. Users do not have access to the complete CDR data set and should draw conclusions with care.

Nuclear and Chemical Weapons and Materiel: Chemical Surety

National Research Council Canada - National Science Library

2001-01-01

.... It has been revised to update responsibilities, Personnel Reliability Program (PRP) procedures, transportation policies, chemical event notification, chemical accident or incident response and assistance (CAIRA...

Atlantic Canada, on watch : Canadian Coast Guard sails to rescue of oiled wildlife

Energy Technology Data Exchange (ETDEWEB)

Reid, W.

1999-08-02

The impact that tanker ships have left on the marine ecosystem on Newfoundland`s south coast was discussed. Tankers and container ships have sometimes discharged leftover bunker-C fuel before entering the St. Lawrence Seaway to save on cleaning services. It is estimated that 60,000 to 100,000 of the 30 million seabirds which reside or migrate through the ecological reserve around St. Mary`s Bay, die each year from the effects of oil. Victims are mostly puffins, seagulls and murres. This paper discussed the involvement of the Canadian Coast Guard in the Prevention of Oiled Wildlife (POW) project. POW has compared British Columbia`s shipping practices with those of Newfoundland. Although crude oil shipments along the B.C. coast exceed 250 million barrels annually, seabirds are not being oiled by passing tankers. It was suggested that in order to change attitudes in Atlantic waters, the maximum fine of $1 million against offenders should be imposed. So far, the highest penalty levied by Transport Canada has been $30,000. It was argued that this is not a significant deterrent for most polluters.

Atlantic Canada, on watch : Canadian Coast Guard sails to rescue of oiled wildlife

International Nuclear Information System (INIS)

Reid, W.

1999-01-01

The impact that tanker ships have left on the marine ecosystem on Newfoundland's south coast was discussed. Tankers and container ships have sometimes discharged leftover bunker-C fuel before entering the St. Lawrence Seaway to save on cleaning services. It is estimated that 60,000 to 100,000 of the 30 million seabirds which reside or migrate through the ecological reserve around St. Mary's Bay, die each year from the effects of oil. Victims are mostly puffins, seagulls and murres. This paper discussed the involvement of the Canadian Coast Guard in the Prevention of Oiled Wildlife (POW) project. POW has compared British Columbia's shipping practices with those of Newfoundland. Although crude oil shipments along the B.C. coast exceed 250 million barrels annually, seabirds are not being oiled by passing tankers. It was suggested that in order to change attitudes in Atlantic waters, the maximum fine of $1 million against offenders should be imposed. So far, the highest penalty levied by Transport Canada has been $30,000. It was argued that this is not a significant deterrent for most polluters

A guidance law for UAV autonomous aerial refueling based on the iterative computation method

Directory of Open Access Journals (Sweden)

Luo Delin

2014-08-01

Full Text Available The rendezvous and formation problem is a significant part for the unmanned aerial vehicle (UAV autonomous aerial refueling (AAR technique. It can be divided into two major phases: the long-range guidance phase and the formation phase. In this paper, an iterative computation guidance law (ICGL is proposed to compute a series of state variables to get the solution of a control variable for a UAV conducting rendezvous with a tanker in AAR. The proposed method can make the control variable converge to zero when the tanker and the UAV receiver come to a formation flight eventually. For the long-range guidance phase, the ICGL divides it into two sub-phases: the correction sub-phase and the guidance sub-phase. The two sub-phases share the same iterative process. As for the formation phase, a velocity coordinate system is created by which control accelerations are designed to make the speed of the UAV consistent with that of the tanker. The simulation results demonstrate that the proposed ICGL is effective and robust against wind disturbance.

The LNG Industry - 2010

International Nuclear Information System (INIS)

2011-04-01

In 2010, global energy demand has recovered. Estimates for World Natural Gas consumption show a 7.3% increase compared with 2009 thanks to the economic rally and the cold winter conditions in Western countries. Due to the decline of indigenous productions in mature markets and to the development of new gas markets, international gas flows continued to expand, and total international gas trade increased by 10.9% compared with 2009. In this context, LNG flows recorded the largest growth with a 21% increase in 2010, the operational start-up of new liquefaction capacity in Qatar being the primary reason. By comparison, pipeline trade increased by 7%. This annual report presents: 1 - LNG contracts and trade, 2 - Contracts concluded in 2010, 3 - LNG imports - Sources of imports - Quantities received in 2010, 4 - LNG tankers, 5 - Ships delivered, 6 - Tanker distribution, 7 - Liquefaction plants, 8 - re-gasification plants, 9 - Contracts in force in 2010, 10 - Spot and short term quantities received in 2010, 11 - Sea transportation routes, 12 - Liquefaction plants (table), 13 - re-gasification plants (table), 14 - Delivery date of the LNG tankers

Hannah Arendt og pædagogikken

DEFF Research Database (Denmark)

Korsgaard, Morten Timmermann

Hannah Arendt er en af det 20. århundredes store politiske tænkere. Hovedværkerne Det totalitære samfundssystems oprindelse, Menneskets vilkår og Eichmann i Jerusalem er centrale skrifter i den politiske filosofi og behandler vigtige emner som totalitarisme, menneskelig handling og ondskab. Derfor...... er Arendts ganske vist få og sporadiske ─ men ikke mindre vigtige ─ tanker om pædagogikken også en smule oversete. Og ikke nok med det: De fleste pædagogiske fortolkere af Arendt læser med Arendt mod Arendt i stedet for at følge Arendts tænkning om skole og opdragelse til ende. Det forsøger dette...... lille skrift at råde bod på. Arendts tanker om pædagogikken udgør nemlig et væsentligt alternativ til de tanker om pædagogik, der er fremherskende i dag, og giver et nyt perspektiv på pædagogikken. Bogen argumenterer bl.a. for, at man med ideerne om læringssamfundet og konkurrencestaten helt glemmer...

Calculation of baryon chemical potential and strangeness chemical potential in resonance matter

International Nuclear Information System (INIS)

Fu Yuanyong; Hu Shouyang; Lu Zhongdao

2006-01-01

Based on the high energy heavy-ion collisions statistical model, the baryon chemical potential and strangeness chemical potential are calculated for resonance matter with net baryon density and net strangeness density under given temperature. Furthermore, the relationship between net baryon density, net strangeness density and baryon chemical potential, strangeness chemical potential are analyzed. The results show that baryon chemical potential and strangeness chemical potential increase with net baryon density and net strangeness density increasing, the change of net baryon density affects baryon chemical potential and strangeness chemical potential more strongly than the change of net strangeness density. (authors)

Environmental protection systems for the petroleum industry

International Nuclear Information System (INIS)

Lowe, G.B.

1996-01-01

The transportation of petroleum products and other chemicals can involve spillage and leaks despite being closely controlled. Human error in the loading of road tankers or consumers refuelling their vehicles at service stations can lead to spillage accidents. Seepage through permeable concrete and its expansion joints can occur for diesel underground tanks with serious environmental consequences. This article describes methods which could be adopted by the petroleum industry to prevent these accidental incidents from causing environmental pollution. Service station forecourts could be constructed, using precast concrete hexagonal blocks with dry sand between them and then have a coating of sealant to prevent spills from seeping into ground water. Secondary containment for underground tanks should be given an elastomeric membrane coating. (UK)

Chemical Emergencies - Multiple Languages

Science.gov (United States)

... Chemical Emergencies - bosanski (Bosnian) PDF Chemical Emergencies - English MP3 Chemical Emergencies - bosanski (Bosnian) MP3 Chemical Emergencies - English MP4 Chemical Emergencies - bosanski (Bosnian) ...

The chemical juggernaut.

Science.gov (United States)

Cadbury, D

1997-01-01

Man-made chemicals pervade and support every aspect of modern living. The chemical industry has become such a powerful force in the global economy, sales of synthetic chemicals and products derived from them constitute well in excess of a third of the world's gross national product. But, these man-made chemicals are also 'elixirs of death,' the symbol of human destruction. Laboratory tests have shown that a number of chemicals in common use possess a remarkable property: they can weakly mimic or modify the action of human hormones. It has been proven that some chemicals found in plastics, pesticides, and industrial products are weakly estrogenic, modifying the action of the female hormone. In addition, other chemicals affect the male hormones, androgens, or anti-androgens; others are thought to target different hormone systems, such as thyroid and adrenal glands. Many research studies are being conducted to establish the impact of chemicals on human health. Of special concern are the rising incidence of testicular cancer, decline in human sperm counts, and the sharp rise of breast cancer. In conclusion, although there is a worldwide debate on the effects of chemical exposure on humans, the significance of findings for human health, concerning testicular and breast cancer, are still unknown. An international treaty is called for to control the use of the persistent hormonally active chemicals.

Evaluation of chromosome aberration and micronucleus frequencies in blood lymphocytes of workers exposed to low concentrations of benzene.

Science.gov (United States)

Lovreglio, Piero; Maffei, Francesca; Carrieri, Mariella; D'Errico, Maria N; Drago, Ignazio; Hrelia, Patrizia; Bartolucci, Giovanni B; Soleo, Leonardo

2014-08-01

The frequency of chromosome aberrations (CA) and micronuclei (MN) was investigated in the peripheral lymphocytes of workers occupationally exposed to low or very low concentrations of benzene. The study included 43 exposed workers (all males), namely 19 fuel-tanker drivers and 24 filling-station attendants, and 31 male subjects with no occupational exposure to the toxicant (controls). Benzene exposure was verified by means of environmental monitoring with passive personal samplers (Radiello(®)), and through biological monitoring, i.e. by measurement of urinary trans,trans-muconic acid, S-phenylmercapturic acid and benzene. The frequency of CA and MN in peripheral lymphocytes was determined according to standard procedures. Exposure to benzene was found to be significantly higher for fuel-tanker drivers (median 246.6 μg/m(3)) than for filling-station attendants (median 19.9 μg/m(3)). Both groups had significantly higher exposure than controls (median 4.3 μg/m(3)). No increased frequency of CA and MN was observed in either fuel-tanker drivers or filling-station attendants compared with controls. In all subjects examined as a single group, the frequency of MN was significantly dependent on age. Only in the fuel-tanker drivers was the frequency of MN found to depend not only on age, but also on exposure to benzene. In conclusion, the frequency of MN, but not of CA, could be influenced by exposure to benzene concentrations of up to one order of magnitude lower than the threshold limit value (time-weighted average). Copyright © 2014 Elsevier B.V. All rights reserved.

Characterizing the relative contributions of large vessels to total ocean noise fields: a case study using the Gerry E. Studds Stellwagen Bank National Marine Sanctuary.

Science.gov (United States)

Hatch, Leila; Clark, Christopher; Merrick, Richard; Van Parijs, Sofie; Ponirakis, Dimitri; Schwehr, Kurt; Thompson, Michael; Wiley, David

2008-11-01

In 2006, we used the U.S. Coast Guard's Automatic Identification System (AIS) to describe patterns of large commercial ship traffic within a U.S. National Marine Sanctuary located off the coast of Massachusetts. We found that 541 large commercial vessels transited the greater sanctuary 3413 times during the year. Cargo ships, tankers, and tug/tows constituted 78% of the vessels and 82% of the total transits. Cargo ships, tankers, and cruise ships predominantly used the designated Boston Traffic Separation Scheme, while tug/tow traffic was concentrated in the western and northern portions of the sanctuary. We combined AIS data with low-frequency acoustic data from an array of nine autonomous recording units analyzed for 2 months in 2006. Analysis of received sound levels (10-1000 Hz, root-mean-square pressure re 1 microPa +/- SE) averaged 119.5 +/- 0.3 dB at high-traffic locations. High-traffic locations experienced double the acoustic power of less trafficked locations for the majority of the time period analyzed. Average source level estimates (71-141 Hz, root-mean-square pressure re 1 microPa +/- SE) for individual vessels ranged from 158 +/- 2 dB (research vessel) to 186 +/- 2 dB (oil tanker). Tankers were estimated to contribute 2 times more acoustic power to the region than cargo ships, and more than 100 times more than research vessels. Our results indicate that noise produced by large commercial vessels was at levels and within frequencies that warrant concern among managers regarding the ability of endangered whales to maintain acoustic contact within greater sanctuary waters.

EIA cites importance of key world shipping routes

International Nuclear Information System (INIS)

Anon.

1994-01-01

A disruption of crude oil or products shipments through any of six world chokepoints would cause a spike in oil prices, the US Energy Information Administration (EIA) warns. The strategic importance of each major shipping lane varies because of differing oil volumes and access to other transportation routes. But nearly half of the 66 million b/d of oil consumed worldwide flows through one or more of these key tanker routes, involving: 14 million b/d through the Strait of Hormuz from the Persian Gulf to the Gulf of Oman and Arabian Sea; 7 million b/d through the Strait of Malacca from the northern Indian Ocean into the South China Sea and Pacific Ocean; 1.6 million b/d through the Bosporus from the Black Sea to the Mediterranean Sea; 900,000 b/d through the Suez Canal from the Red Sea to the Mediterranean Sea; 600,000 b/d through Rotterdam Harbor from the North Sea to Dutch and German refineries on or near the Rhine River; and 500,000 b/d through the Panama Canal from the Pacific Ocean to the Caribbean Sea. In today's highly interdependent oil markets, the mere perception of less secure oil supplies is enough to boost oil prices, EIA said. Growing oil and product tanker traffic is increasing the likelihood of supply disruptions through oil arteries because of bad weather, tanker collisions, or acts of piracy, terrorism, or war. What's more, the increasing age of the world tanker fleet and dependability of navigational equipment could increase chances of accidents and, therefore, oil supply disruptions

Chemical sensor

Science.gov (United States)

Rauh, R. David (Inventor)

1990-01-01

A sensor for detecting a chemical substance includes an insertion element having a structure which enables insertion of the chemical substance with a resulting change in the bulk electrical characteristics of the insertion element under conditions sufficient to permit effective insertion; the change in the bulk electrical characteristics of the insertion element is detected as an indication of the presence of the chemical substance.

Benzene exposure in a Japanese petroleum refinery.

Science.gov (United States)

Kawai, T; Yamaoka, K; Uchida, Y; Ikeda, M

1990-07-01

Time-weighted average (TWA) intensity of exposure of workers to benzene vapor during a shift was monitored by diffusive sampling technique in a Japanese petroleum refinery. The subjects monitored (83 in total) included refinery operators, laboratory personnel and tanker-loading workers. The results showed that the time-weighted average exposures are well below 1 ppm in most cases. The highest exposure was recorded in 1 case involved in bulk loading of tanker ships, in which exposure of over 1 ppm might take place depending on operational conditions. The observation was generally in agreement with levels previously reported.

Hazardous Chemicals

Centers for Disease Control (CDC) Podcasts

Chemicals are a part of our daily lives, providing many products and modern conveniences. With more than three decades of experience, The Centers for Disease Control and Prevention (CDC) has been in the forefront of efforts to protect and assess people's exposure to environmental and hazardous chemicals. This report provides information about hazardous chemicals and useful tips on how to protect you and your family from harmful exposure.

Chemical and non-chemical stressors affecting childhood obesity: a systematic scoping review.

Science.gov (United States)

Lichtveld, Kim; Thomas, Kent; Tulve, Nicolle S

2018-01-01

Childhood obesity in the United States has doubled over the last three decades and currently affects 17% of children and adolescents. While much research has focused on individual behaviors impacting obesity, little research has emphasized the complex interactions of numerous chemical and non-chemical stressors found in a child's environment and how these interactions affect a child's health and well-being. The objectives of this systematic scoping review were to (1) identify potential chemical stressors in the context of non-chemical stressors that impact childhood obesity; and, (2) summarize our observations for chemical and non-chemical stressors in regards to child-specific environments within a community setting. A review was conducted to identify chemical and non-chemical stressors related to childhood obesity for the childhood life stages ranging from prenatal to adolescence. Stressors were identified and grouped into domains: individual behaviors, family/household behaviors, community stressors, and chemical exposures. Stressors were related to the child and the child's everyday environments and used to characterize child health and well-being. This review suggests that the interactions of chemical and non-chemical stressors are important for understanding a child's overall health and well-being. By considering these relationships, the exposure science research community can better design and implement strategies to reduce childhood obesity.

Chemical Emergencies Overview

Science.gov (United States)

... Address What's this? Submit What's this? Submit Button Chemical Emergencies Overview Recommend on Facebook Tweet Share Compartir ... themselves during and after such an event. What chemical emergencies are A chemical emergency occurs when a ...

Physico-chemical, mineralogical and chemical considerations in ...

African Journals Online (AJOL)

... pH (5.17 – 6.90) and EC (16.53 – 149.20ìS/cm). Values from physico-chemical analyses, secondary minerals abundance index (SMAI) and chemical index of alteration (CIA) of the soils were reflective of particles with high potential for sliding. With major contributions from favourable slope, seismic and hydrologic forces, ...

Chemical Oscillations

Indian Academy of Sciences (India)

IMTECH),. Chandigarh. Praveen Kumar is pursuing his PhD in chemical dynamics at. Panjab University,. Chandigarh. Keywords. Chemical oscillations, autoca-. talYSis, Lotka-Volterra model, bistability, hysteresis, Briggs-. Rauscher reaction.

Thermodynamic chemical energy transfer mechanisms of non-equilibrium, quasi-equilibrium, and equilibrium chemical reactions

International Nuclear Information System (INIS)

Roh, Heui-Seol

2015-01-01

Chemical energy transfer mechanisms at finite temperature are explored by a chemical energy transfer theory which is capable of investigating various chemical mechanisms of non-equilibrium, quasi-equilibrium, and equilibrium. Gibbs energy fluxes are obtained as a function of chemical potential, time, and displacement. Diffusion, convection, internal convection, and internal equilibrium chemical energy fluxes are demonstrated. The theory reveals that there are chemical energy flux gaps and broken discrete symmetries at the activation chemical potential, time, and displacement. The statistical, thermodynamic theory is the unification of diffusion and internal convection chemical reactions which reduces to the non-equilibrium generalization beyond the quasi-equilibrium theories of migration and diffusion processes. The relationship between kinetic theories of chemical and electrochemical reactions is also explored. The theory is applied to explore non-equilibrium chemical reactions as an illustration. Three variable separation constants indicate particle number constants and play key roles in describing the distinct chemical reaction mechanisms. The kinetics of chemical energy transfer accounts for the four control mechanisms of chemical reactions such as activation, concentration, transition, and film chemical reactions. - Highlights: • Chemical energy transfer theory is proposed for non-, quasi-, and equilibrium. • Gibbs energy fluxes are expressed by chemical potential, time, and displacement. • Relationship between chemical and electrochemical reactions is discussed. • Theory is applied to explore nonequilibrium energy transfer in chemical reactions. • Kinetics of non-equilibrium chemical reactions shows the four control mechanisms

Leachate storage transport tanker loadout piping

International Nuclear Information System (INIS)

Whitlock, R.W.

1994-01-01

This report shows the modifications to the W-025 Trench No. 31 leachate loadout discharge piping, and also the steps involved in installing the discharge piping, including dimensions and welding information. The installation of the discharge pipe should be done in accordance to current pipe installation standards. Trench No. 31 is a radioactive mixed waste land disposal facility

Tankering Fuel: A Cost Saving Initiative

Science.gov (United States)

2011-05-01

2.41075 RIO DE JANEIRO IAP SBGL OS 3.1867 Riyadh Mil Apt Saudi A OERY OS 2.5587 Riyadh Mil Apt Saudi A OERY OS 2.5396 ROANOKE RGNLWOODRUM FLD KROA...US NGB NORTHCOM Davis Monthan AFB KDMA AF Arizona US ACC NORTHCOM Davision Army Airfield ARMY Virginia US IMCOM NORTHCOM Des Moines ANG KDSM AF...Carolina US NULL NORTHCOM MCAS New River NAVY North Carolina US NULL NORTHCOM MCAS Yuma KYUM NAVY Arizona US NULL NORTHCOM MCB 29 Palms NAVY

Chemical-induced Vitiligo

Science.gov (United States)

Harris, John E.

2016-01-01

Synopsis Chemical-induced depigmentation of the skin has been recognized for over 75 years, first as an occupational hazard but then extending to those using household commercial products as common as hair dyes. Since their discovery, these chemicals have been used therapeutically in patients with severe vitiligo to depigment their remaining skin and improve their appearance. The importance of recognizing this phenomenon was highlighted during an outbreak of vitiligo in Japan during the summer of 2013, when over 16,000 users of a new skin lightening cosmetic cream developed skin depigmentation at the site of contact with the cream and many in remote areas as well. Depigmenting chemicals appear to be analogs of the amino acid tyrosine that disrupt melanogenesis and result in autoimmunity and melanocyte destruction. Because chemical-induced depigmentation is clinically and histologically indistinguishable from non-chemically induced vitiligo, and because these chemicals appear to induce melanocyte autoimmunity, this phenomenon should be known as “chemical-induced vitiligo”, rather than less accurate terms that have been previously used. PMID:28317525

Finding Chemical Structures Corresponding to a Set of Coordinates in Chemical Descriptor Space.

Science.gov (United States)

Miyao, Tomoyuki; Funatsu, Kimito

2017-08-01

When chemical structures are searched based on descriptor values, or descriptors are interpreted based on values, it is important that corresponding chemical structures actually exist. In order to consider the existence of chemical structures located in a specific region in the chemical space, we propose to search them inside training data domains (TDDs), which are dense areas of a training dataset in the chemical space. We investigated TDDs' features using diverse and local datasets, assuming that GDB11 is the chemical universe. These two analyses showed that considering TDDs gives higher chance of finding chemical structures than a random search-based method, and that novel chemical structures actually exist inside TDDs. In addition to those findings, we tested the hypothesis that chemical structures were distributed on the limited areas of chemical space. This hypothesis was confirmed by the fact that distances among chemical structures in several descriptor spaces were much shorter than those among randomly generated coordinates in the training data range. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Braer incident: Dispersion in action

International Nuclear Information System (INIS)

Thomas, D.

1993-01-01

In January 1993, the tanker Braer foundered in the Shetland Islands and pollution from the cargo of 85,000 tonnes of Gullfaks crude oil was reported almost immediately. The tanker was battered by storm winds and finally broke up, spilling the remainder of its cargo into the bay at Garth's Ness. Dispersants were applied to the oil plumes, assisting the significant natural dispersion. Shoreline protection and cleanup activities included construction of spade dams and sorbent barriers. Oil concentrations in water, air, sediment, and fish were monitored. The sampling program undertaken during the spill period is described. Measured hydrocarbon concentrations in salmon farm areas were not observed to rise above 4 ppM. The high rates of dispersion make the Braer incident worthy of detailed study both in terms of understanding the mechanism of the dispersion process and also in assessing the environmental effects following high dispersed oil concentrations. Estimates of the spill's mass balance are provided for the bay at Garth's Ness, where the highest oil concentrations were observed, and along the 26 km of coastline which received the most significant concentrations of dispersed oil. Contrary to laboratory experiments which showed that the Gullfaks crude would emulsify at the high sea states prevailing at the time, the Braer spill did not emulsify and most of the oil released was dispersed naturally into the water column. It appears that it is most appropriate to model the Braer spill as a spillage of floating or dissolved chemical. 4 refs., 4 figs., 6 tabs

Gemi Kazalarına Neden Olan Köprü Üstü Kaynaklı Eksikliklerin İstatistiksel Açıdan İncelemesi

Directory of Open Access Journals (Sweden)

Tuba KEÇECİ

2014-06-01

Full Text Available Denizcilik sektörü için en önemli konulardan biri, insana, çevreye ve eşyaya gelebilecek zararların en aza indirilmesi amaçlanarak, ileride meydana gelecek kazaların önlenmesine çalışılmasıdır. Deniz kazalarının incelenmesi ve gemide emniyeti etkileyen faktörlerin belirlenmesi, bu amaca ulaşmada en önemli adımı oluşturmaktadır. Gemilerin emniyetli şekilde işletilmesi ve yönetilmesi için, gemilerin uluslararası standartlara uygunluğu sürekli olarak bayrak devleti ve liman devleti yetkililerince denetlenmektedir. Tanker şirketleri bu denetimlere ek olarak, yük taşıtan petrol ve kimyasal endüstrisi tarafından da denetime tabi tutulmaktadır. Bu çalışmada, Türk tanker şirketlerinin SIRE (Ship Inspection Report Programme ve CDI (Chemical Distribution Institute kapsamında gerçekleştirilen denetim sonuçları incelenerek, bulunan eksikliklerin ve bunlara ait kök sebeplerin araştırılmasına çalışılmıştır. En sık görülen hatalardan biri olan köprü üstü kaynaklı eksiklikler istatistiksel olarak ortaya konularak, bu hataların oluşmasında rol oynayan kök sebepler tartışılmıştır.

Operation of chemical incinerator for disposal of legacy chemicals

International Nuclear Information System (INIS)

Singhal, R.K.; Basu, H.; Saha, S.; Pimple, M.V.; Naik, P.D.

2017-01-01

For safe disposal of age-old legacy and unused chemicals in BARC, Trombay, oil-fired chemical incinerator with a capacity of 20 kg h"-"1 for solid and liquid chemical is installed adjacent to trash incinerator near RSMS, Gamma Field. The Incinerator was supplied by M/s B. L. Engineering Works, Ahmedabad. Commission of the same at Trombay site was carried out, under the supervision of Civil Engineering (CED), Technical Services Division (TSD) and Analytical Chemistry Division (custodian of the facility)

Chemical Peels

Science.gov (United States)

... for Every Season How to Choose the Best Skin Care Products In This Section Dermatologic Surgery What is dermatologic ... for Every Season How to Choose the Best Skin Care Products Chemical Peels Uses for Chemical Peels Learn more ...

Atlantic Canada, on watch : Canadian Coast Guard sails to rescue of oiled wildlife

Energy Technology Data Exchange (ETDEWEB)

Reid, W

1999-08-02

The impact that tanker ships have left on the marine ecosystem on Newfoundland's south coast was discussed. Tankers and container ships have sometimes discharged leftover bunker-C fuel before entering the St. Lawrence Seaway to save on cleaning services. It is estimated that 60,000 to 100,000 of the 30 million seabirds which reside or migrate through the ecological reserve around St. Mary's Bay, die each year from the effects of oil. Victims are mostly puffins, seagulls and murres. This paper discussed the involvement of the Canadian Coast Guard in the Prevention of Oiled Wildlife (POW) project. POW has compared British Columbia's shipping practices with those of Newfoundland. Although crude oil shipments along the B.C. coast exceed 250 million barrels annually, seabirds are not being oiled by passing tankers. It was suggested that in order to change attitudes in Atlantic waters, the maximum fine of $1 million against offenders should be imposed. So far, the highest penalty levied by Transport Canada has been $30,000. It was argued that this is not a significant deterrent for most polluter00.

Vibration Considerations for Cryogenic Tanks Using Glass Bubbles Insulation

Science.gov (United States)

Werlink, Rudolph J.; Fesmire, James E.; Sass, Jared P.

2011-01-01

The use of glass bubbles as an efficient and practical thermal insulation system has been previously demonstrated in cryogenic storage tanks. One such example is a spherical, vacuum-jacketed liquid hydrogen vessel of 218,000 liter capacity where the boiloff rate has been reduced by approximately 50 percent. Further applications may include non-stationary tanks such as mobile tankers and tanks with extreme duty cycles or exposed to significant vibration environments. Space rocket launch events and mobile tanker life cycles represent two harsh cases of mechanical vibration exposure. A number of bulk fill insulation materials including glass bubbles, perlite powders, and aerogel granules were tested for vibration effects and mechanical behavior using a custom design holding fixture subjected to random vibration on an Electrodynamic Shaker. The settling effects for mixtures of insulation materials were also investigated. The vibration test results and granular particle analysis are presented with considerations and implications for future cryogenic tank applications. A thermal performance update on field demonstration testing of a 218,000 L liquid hydrogen storage tank, retrofitted with glass bubbles, is presented. KEYWORDS: Glass bubble, perlite, aerogel, insulation, liquid hydrogen, storage tank, mobile tanker, vibration.

Arctic Islands LNG

Energy Technology Data Exchange (ETDEWEB)

Hindle, W.

1977-01-01

Trans-Canada Pipe Lines Ltd. made a feasibility study of transporting LNG from the High Arctic Islands to a St. Lawrence River Terminal by means of a specially designed and built 125,000 cu m or 165,000 cu m icebreaking LNG tanker. Studies were made of the climatology and of ice conditions, using available statistical data as well as direct surveys in 1974, 1975, and 1976. For on-schedule and unimpeded (unescorted) passage of the LNG carriers at all times of the year, special navigation and communications systems can be made available. Available icebreaking experience, charting for the proposed tanker routes, and tide tables for the Canadian Arctic were surveyed. Preliminary design of a proposed Arctic LNG icebreaker tanker, including containment system, reliquefaction of boiloff, speed, power, number of trips for 345 day/yr operation, and liquefaction and regasification facilities are discussed. The use of a minimum of three Arctic Class 10 ships would enable delivery of volumes of natural gas averaging 11.3 million cu m/day over a period of a year to Canadian markets. The concept appears to be technically feasible with existing basic technology.

Advances in chemical physics

CERN Document Server

Rice, Stuart A

2012-01-01

The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics field with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series serves as the perfect supplement to any advanced graduate class devoted to the study of chemical physics. This volume explores: Quantum Dynamical Resonances in Ch

Predicting Anatomical Therapeutic Chemical (ATC) Classification of Drugs by Integrating Chemical-Chemical Interactions and Similarities

Science.gov (United States)

Chen, Lei; Zeng, Wei-Ming; Cai, Yu-Dong; Feng, Kai-Yan; Chou, Kuo-Chen

2012-01-01

The Anatomical Therapeutic Chemical (ATC) classification system, recommended by the World Health Organization, categories drugs into different classes according to their therapeutic and chemical characteristics. For a set of query compounds, how can we identify which ATC-class (or classes) they belong to? It is an important and challenging problem because the information thus obtained would be quite useful for drug development and utilization. By hybridizing the informations of chemical-chemical interactions and chemical-chemical similarities, a novel method was developed for such purpose. It was observed by the jackknife test on a benchmark dataset of 3,883 drug compounds that the overall success rate achieved by the prediction method was about 73% in identifying the drugs among the following 14 main ATC-classes: (1) alimentary tract and metabolism; (2) blood and blood forming organs; (3) cardiovascular system; (4) dermatologicals; (5) genitourinary system and sex hormones; (6) systemic hormonal preparations, excluding sex hormones and insulins; (7) anti-infectives for systemic use; (8) antineoplastic and immunomodulating agents; (9) musculoskeletal system; (10) nervous system; (11) antiparasitic products, insecticides and repellents; (12) respiratory system; (13) sensory organs; (14) various. Such a success rate is substantially higher than 7% by the random guess. It has not escaped our notice that the current method can be straightforwardly extended to identify the drugs for their 2nd-level, 3rd-level, 4th-level, and 5th-level ATC-classifications once the statistically significant benchmark data are available for these lower levels. PMID:22514724

Hazardous Chemicals

Centers for Disease Control (CDC) Podcasts

2007-04-10

Chemicals are a part of our daily lives, providing many products and modern conveniences. With more than three decades of experience, The Centers for Disease Control and Prevention (CDC) has been in the forefront of efforts to protect and assess people's exposure to environmental and hazardous chemicals. This report provides information about hazardous chemicals and useful tips on how to protect you and your family from harmful exposure.  Created: 4/10/2007 by CDC National Center for Environmental Health.   Date Released: 4/13/2007.

Chemical Product Design

DEFF Research Database (Denmark)

Gani, Rafiqul

2004-01-01

This paper highlights for a class of chemical products, the design process, their design with respect to the important issues, the need for appropriate tools and finally, lists some of the challenges and opportunities for the process systems engineering (PSE)/computer-aided process engineering...... (CAPE) community. The chemical products considered belong to the following types: chemical/biochemical/agrochemical products, coatings and solvents, food (nutraceuticals), HIM (household, industrial and institutional), personal care, pharmaceuticals and drugs. The challenges and opportunities...... are highlighted in terms of the needs for multi-level modeling with emphasis on property models that are suitable for computer-aided applications, flexible solution strategies that are able to solve a large range of chemical product design problems and finally, a systems chemical product design framework...

Compensation for oil pollution damage caused by oil spills from ships and the International Oil Pollution Compensation Fund

International Nuclear Information System (INIS)

Jacobsson, M.

1994-01-01

Liability and compensation for pollution damage caused by oil spills from laden tankers is governed by two international conventions: the 1969 Civil Liability Convention and the 1971 Fund Convention. The Civil Liability Convention established a system of strict liability for tanker owners and introduced compulsory liability insurance. The Fund Convention created a system of supplementary compensation administered by an intergovernmental organization, the International Oil Pollution Compensation Fund (IOPC Fund), which at present has 56 member states (August 1993). The IOPC Fund pays compensation to victims of oil pollution in member states when the compensation from the ship owner and his insurer is insufficient. (author)

Estimation of the Pollution Level in El Timsah Lake, Egypt

International Nuclear Information System (INIS)

Abd El Samie, S.G.; Hassan, H.B.; Hamza, M.S.

2008-01-01

The wide range of activities surrounding El Timsah Lake and the discharge effluent at the north and eastern parts of the lake led to high level of anthropogenic pollution in lake water more than the navigation activities. Heavy metals concentration increases in low salinity water toward the land from the discharging effluent. Whereas, oil hydrocarbon and water salinity increase toward Suez Canal current water. This indicates some dispersion of oil ballast water of shipping tankers or from petroleum companies during transportation in the Suez Canal. Chemical and isotopic results indicate lake water stratification, low mixing rate due to slow current of lake water. This led to long residence time of the pollution load enhancing accumulation and precipitation of the heavy metals to the bottom sediment near the boundaries of the lake

Persistence, biodegradation and biological impact of Bunker C residues in Black Duck Cove, Nova Scotia

Energy Technology Data Exchange (ETDEWEB)

Lee, K.; Wohlgeschaffen, G. D.; Tremblay, G. H. [Dept. of Fisheries and Oceans of Canada, Inst. Maurice-Lamontagne, Mont Joli, PQ (Canada); Vandermeulen, D. C.; Mossman, K. G. [Dept. of Fisheries and Oceans of Canada, Bedford Inst. of Oceanography, Dartmouth, NS (Canada); Doe, K. G.; Jackman, P. M. [Environment Canada, Environmental Science Center, Moncton, NB (Canada); Prince, R. C.; Garrett, R. M.; Haith, C. E. [Exxon Research and Engineering Company, Annandale, NJ (United States)

1998-12-31

In 1970, approximately 2,045 cubic metres of Bunker C oil impacted on 300 km of Nova Scotia`s coastline following the grounding of the tanker `Arrow`. Only 10 per cent of the coastline was subjected to cleanup, the remainder was left to degrade naturally. Samples of sediments were collected in 1993 and 1997 in order to assess the attenuation processes on the reduction of toxicity within sediments and interstitial waters at Black Duck Cove, one of the untreated sites where residual oil was clearly evident. Detailed chemical analyses showed that the Bunker C oil at this site has undergone substantial biodegradation. Over the 20 plus years since the oil spill the toxicity of the residual oil has been significantly reduced and there is substantial evidence of habitat recovery.

Persistence, biodegradation and biological impact of Bunker C residues in Black Duck Cove, Nova Scotia

Energy Technology Data Exchange (ETDEWEB)

Lee, K.; Wohlgeschaffen, G. D.; Tremblay, G. H. [Dept. of Fisheries and Oceans of Canada, Inst. Maurice-Lamontagne, Mont Joli, PQ (Canada); Vandermeulen, D. C.; Mossman, K. G. [Dept. of Fisheries and Oceans of Canada, Bedford Inst. of Oceanography, Dartmouth, NS (Canada); Doe, K. G.; Jackman, P. M. [Environment Canada, Environmental Science Center, Moncton, NB (Canada); Prince, R. C.; Garrett, R. M.; Haith, C. E. [Exxon Research and Engineering Company, Annandale, NJ (United States)

1998-07-01

In 1970, approximately 2,045 cubic metres of Bunker C oil impacted on 300 km of Nova Scotia's coastline following the grounding of the tanker 'Arrow'. Only 10 per cent of the coastline was subjected to cleanup, the remainder was left to degrade naturally. Samples of sediments were collected in 1993 and 1997 in order to assess the attenuation processes on the reduction of toxicity within sediments and interstitial waters at Black Duck Cove, one of the untreated sites where residual oil was clearly evident. Detailed chemical analyses showed that the Bunker C oil at this site has undergone substantial biodegradation. Over the 20 plus years since the oil spill the toxicity of the residual oil has been significantly reduced and there is substantial evidence of habitat recovery.

Using chemical benchmarking to determine the persistence of chemicals in a Swedish lake.

Science.gov (United States)

Zou, Hongyan; Radke, Michael; Kierkegaard, Amelie; MacLeod, Matthew; McLachlan, Michael S

2015-02-03

It is challenging to measure the persistence of chemicals under field conditions. In this work, two approaches for measuring persistence in the field were compared: the chemical mass balance approach, and a novel chemical benchmarking approach. Ten pharmaceuticals, an X-ray contrast agent, and an artificial sweetener were studied in a Swedish lake. Acesulfame K was selected as a benchmark to quantify persistence using the chemical benchmarking approach. The 95% confidence intervals of the half-life for transformation in the lake system ranged from 780-5700 days for carbamazepine to benchmarking approach agreed well with those from the mass balance approach (1-21% difference), indicating that chemical benchmarking can be a valid and useful method to measure the persistence of chemicals under field conditions. Compared to the mass balance approach, the benchmarking approach partially or completely eliminates the need to quantify mass flow of chemicals, so it is particularly advantageous when the quantification of mass flow of chemicals is difficult. Furthermore, the benchmarking approach allows for ready comparison and ranking of the persistence of different chemicals.

Vulnerability assessment of chemical industry facilities in South Korea based on the chemical accident history

Science.gov (United States)

Heo, S.; Lee, W. K.; Jong-Ryeul, S.; Kim, M. I.

2016-12-01

The use of chemical compounds are keep increasing because of their use in manufacturing industry. Chemical accident is growing as the consequence of the chemical use increment. Devastating damages from chemical accidents are far enough to aware people's cautious about the risk of the chemical accident. In South Korea, Gumi Hydrofluoric acid leaking accident triggered the importance of risk management and emphasized the preventing the accident over the damage reducing process after the accident occurs. Gumi accident encouraged the government data base construction relate to the chemical accident. As the result of this effort Chemical Safety-Clearing-house (CSC) have started to record the chemical accident information and damages according to the Harmful Chemical Substance Control Act (HCSC). CSC provide details information about the chemical accidents from 2002 to present. The detail informations are including title of company, address, business type, accident dates, accident types, accident chemical compounds, human damages inside of the chemical industry facilities, human damage outside of the chemical industry facilities, financial damages inside of the chemical industry facilities, and financial damages outside of the chemical industry facilities, environmental damages and response to the chemical accident. Collected the chemical accident history of South Korea from 2002 to 2015 and provide the spatial information to the each accident records based on their address. With the spatial information, compute the data on ArcGIS for the spatial-temporal analysis. The spatial-temporal information of chemical accident is organized by the chemical accident types, damages, and damages on environment and conduct the spatial proximity with local community and environmental receptors. Find the chemical accident vulnerable area of South Korea from 2002 to 2015 and add the vulnerable area of total period to examine the historically vulnerable area from the chemical accident in

Design of chemical plant

International Nuclear Information System (INIS)

Lee, Dong Il; Kim, Seung Jae; Yang, Jae Ho; Ryu, Hwa Won

1993-01-01

This book describes design of chemical plant, which includes chemical engineer and plan for chemical plant, development of chemical process, cost engineering pattern, design and process development, general plant construction plan, project engineering, foundation for economy on assets and depreciation, estimation for cost on capital investment and manufacturing cost, design with computers optimal design and method like fluid mechanics design chemical device and estimation for cost, such as dispatch of material and device writing on design report and appendixes.

Soil chemical sensor and precision agricultural chemical delivery system and method

Science.gov (United States)

Colburn, Jr., John W.

1991-01-01

A real time soil chemical sensor and precision agricultural chemical delivery system includes a plurality of ground-engaging tools in association with individual soil sensors which measure soil chemical levels. The system includes the addition of a solvent which rapidly saturates the soil/tool interface to form a conductive solution of chemicals leached from the soil. A multivalent electrode, positioned within a multivalent frame of the ground-engaging tool, applies a voltage or impresses a current between the electrode and the tool frame. A real-time soil chemical sensor and controller senses the electrochemical reaction resulting from the application of the voltage or current to the leachate, measures it by resistivity methods, and compares it against pre-set resistivity levels for substances leached by the solvent. Still greater precision is obtained by calibrating for the secondary current impressed through solvent-less soil. The appropriate concentration is then found and the servo-controlled delivery system applies the appropriate amount of fertilizer or agricultural chemicals substantially in the location from which the soil measurement was taken.

Advances in chemical physics

CERN Document Server

Rice, Stuart A

2014-01-01

Advances in Chemical Physics is the only series of volumes available that explores the cutting edge of research in chemical physics. This is the only series of volumes available that presents the cutting edge of research in chemical physics.Includes contributions from experts in this field of research.Contains a representative cross-section of research that questions established thinking on chemical solutions.Structured with an editorial framework that makes the book an excellent supplement to an advanced graduate class in physical chemistry or chemical physics.

Environmental/chemical thesaurus

International Nuclear Information System (INIS)

Shriner, C.R.; Dailey, N.S.; Jordan, A.C.; Miller, K.C.; Owens, E.T.; Rickert, L.W.

1978-06-01

The Environmental/Chemical Thesaurus approaches scientific language control problems from a multidisciplinary view. The Environmental/Biomedical Terminology Index (EBTI) was used as a base for the present thesaurus. The Environmental/Chemical Thesaurus, funded by the Environmental Protection Agency, used as its source of new terms those major terms found in 13 Environmental Protection Agency data bases. The scope of this thesaurus includes not only environmental and biomedical sciences, but also the physical sciences with emphasis placed on chemistry. Specific chemical compounds are not included; only classes of chemicals are given. To adhere to this level of classification, drugs and pesticides are identified by class rather than by specific chemical name. An attempt was also made to expand the areas of sociology and economics. Terminology dealing with law, demography, and geography was expanded. Proper names of languages and races were excluded. Geographic terms were expanded to include proper names for oceans, continents, major lakes, rivers, and islands. Political divisions were added to allow for proper names of countries and states. With such a broad scope, terminology for specific sciences does not provide for indexing to the lowest levels in plant, animal, or chemical classifications

Environmental/chemical thesaurus

Energy Technology Data Exchange (ETDEWEB)

Shriner, C.R.; Dailey, N.S.; Jordan, A.C.; Miller, K.C.; Owens, E.T.; Rickert, L.W.

1978-06-01

The Environmental/Chemical Thesaurus approaches scientific language control problems from a multidisciplinary view. The Environmental/Biomedical Terminology Index (EBTI) was used as a base for the present thesaurus. The Environmental/Chemical Thesaurus, funded by the Environmental Protection Agency, used as its source of new terms those major terms found in 13 Environmental Protection Agency data bases. The scope of this thesaurus includes not only environmental and biomedical sciences, but also the physical sciences with emphasis placed on chemistry. Specific chemical compounds are not included; only classes of chemicals are given. To adhere to this level of classification, drugs and pesticides are identified by class rather than by specific chemical name. An attempt was also made to expand the areas of sociology and economics. Terminology dealing with law, demography, and geography was expanded. Proper names of languages and races were excluded. Geographic terms were expanded to include proper names for oceans, continents, major lakes, rivers, and islands. Political divisions were added to allow for proper names of countries and states. With such a broad scope, terminology for specific sciences does not provide for indexing to the lowest levels in plant, animal, or chemical classifications.

Survey of awareness about hazardous chemicals of residents living near chemical plants in South Korea.

Science.gov (United States)

Han, Don-Hee; Park, Min Soo

2018-02-10

With economic growth, the use of chemicals has continually increased, resulting in an increase of chemical accidents. Chemical accidents pose a life threat and can lead to many health problems among the residents living in close proximity to chemical plants. This study aimed to investigate the awareness of the residents living near chemical plants about hazardous chemicals, as well as to survey the awareness of workers who do not directly handle chemicals at chemical plants (WNHCs). To this end, a questionnaire survey was conducted among a total of 600 residents and 160 WNHCs. The questionnaire was composed of three items: awareness of chemical risk, awareness of countermeasures in chemical accidents, and imperious necessity of PPE (personal protective equipment). Statistical analysis of the data was performed with the Statistical Package for Social Sciences (SPSS) version 18.0. The results show that the government needs to complement the notification system of chemical risk for residents who live close to chemical plants. The highest priority of PPE which residents want to prepare for chemical accidents was respiratory protective equipment (RPE). They responded that, if necessary to purchase PPE, they could bear a portion of the expenses (up to US $30). This study provides basic data for the development of programs and policies on chemical safety relevant for the residents living in close proximity to chemical plants in South Korea.

Advances in chemical Physics

CERN Document Server

Rice, Stuart A

2011-01-01

The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics and physical chemistry fields with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series offers contributions from internationally renowned chemists and serves as the perfect supplement to any advanced graduate class devoted to the study of che

Advances in chemical physics

CERN Document Server

Rice, Stuart A

2011-01-01

The Advances in Chemical Physics series-the cutting edge of research in chemical physics The Advances in Chemical Physics series provides the chemical physics and physical chemistry fields with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series offers contributions from internationally renowned chemists and serves as the perfect supplement to any advanced graduate class devoted to the study of che

Microfluidic chemical reaction circuits

Science.gov (United States)

Lee, Chung-cheng [Irvine, CA; Sui, Guodong [Los Angeles, CA; Elizarov, Arkadij [Valley Village, CA; Kolb, Hartmuth C [Playa del Rey, CA; Huang, Jiang [San Jose, CA; Heath, James R [South Pasadena, CA; Phelps, Michael E [Los Angeles, CA; Quake, Stephen R [Stanford, CA; Tseng, Hsian-rong [Los Angeles, CA; Wyatt, Paul [Tipperary, IE; Daridon, Antoine [Mont-Sur-Rolle, CH

2012-06-26

New microfluidic devices, useful for carrying out chemical reactions, are provided. The devices are adapted for on-chip solvent exchange, chemical processes requiring multiple chemical reactions, and rapid concentration of reagents.

Accessing and using chemical databases

DEFF Research Database (Denmark)

Nikolov, Nikolai Georgiev; Pavlov, Todor; Niemelä, Jay Russell

2013-01-01

Computer-based representation of chemicals makes it possible to organize data in chemical databases-collections of chemical structures and associated properties. Databases are widely used wherever efficient processing of chemical information is needed, including search, storage, retrieval......, and dissemination. Structure and functionality of chemical databases are considered. The typical kinds of information found in a chemical database are considered-identification, structural, and associated data. Functionality of chemical databases is presented, with examples of search and access types. More details...... are included about the OASIS database and platform and the Danish (Q)SAR Database online. Various types of chemical database resources are discussed, together with a list of examples....

Polycyclic aromatic hydrocarbons (PAHs) and hopanes in stranded tar-balls on the coasts of peninsular Malaysia: applications of biomarkers for identifying sources of oil pollution

International Nuclear Information System (INIS)

Zakaria, Mohamad Pauzi; Okuba, Tomoaki; Takada, Hideshige

2001-01-01

Malaysian coasts are subjected to various threats of petroleum pollution including routine and accidental oil spill from tankers, spillage of crude oils from inland and offshore oil fields, and run-off from land-based human activities. Due to its strategic location, the Straits of Malacca serves as a major shipping lane. This paper expands the utility of biomarker compounds, hopanes, in identifying the source of tar-balls stranded on Malaysian coasts. 20 tar-ball samples collected from the east and west coast were analysed for hopanes and polycylic aromatic hydrocarbons (PAHs). Four of the 13 tar-ball samples collected from the west coast of Peninsular Malaysia were identified as the Middle East crude oil (MECO) based on their biomarker signatures, suggesting tanker-derived sources significantly contributing the petroleum pollution in the Straits of Malacca. The tar-balls found on the east cost seem to originate from the offshore oil platforms in the South China Sea. The presence of South East Asian crude oil (SEACO) tar-balls on the west coast carry several plausible explanations. Some of the tar-balls could have been transported via sea currents from the east coast. The tankers carrying SEACO to other countries could have accidentally spilt the oil as well. Furthermore, discharge of tank washings and ballast water from the tankers were suggested based on the abundance in higher molecular weight n-alkanes and the absence of unresolved complex mixture (UCM) in the tar-ball samples. The other possibilities are that the tar-balls may have originated from the Sumatran oil fields and spillage of domestic oil from oil refineries in Port Dickson and Malacca. The results of PAHs analysis suggest that all the tar-ball samples have undergone various extent of weathering through evaporation, dissolution and photo-oxidation. (Author)

Polycyclic aromatic hydrocarbon (PAHs) and hopanes in stranded tar-balls on the coasts of Peninsular Malaysia: applications of biomarkers for identifying sources of oil pollution.

Science.gov (United States)

Zakaria, M P; Okuda, T; Takada, H

2001-12-01

Malaysian coasts are subjected to various threats of petroleum pollution including routine and accidental oil spill from tankers, spillage of crude oils from inland and off-shore oil fields, and run-off from land-based human activities. Due to its strategic location, the Straits of Malacca serves as a major shipping lane. This paper expands the utility of biomarker compounds, hopanes, in identifying the source of tar-balls stranded on Malaysian coasts. 20 tar-ball samples collected from the east and west coast were analyzed for hopanes and polycyclic aromatic hydrocarbons (PAHs). Four of the 13 tar-ball samples collected from the west coast of Peninsular Malaysia were identified as the Middle East crude oil (MECO) based on their biomarker signatures, suggesting tanker-derived sources significantly contributing the petroleum pollution in the Straits of Malacca. The tar-balls found on the east coast seem to originate from the offshore oil platforms in the South China Sea. The presence of South East Asian crude oil (SEACO) tar-balls on the west coast carry several plausible explanations. Some of the tar-balls could have been transported via sea currents from the east coast. The tankers carrying SEACO to other countries could have accidentally spilt the oil as well. Furthermore, discharge of tank washings and ballast water from the tankers were suggested based on the abundance in higher molecular weight n-alkanes and the absence of unresolved complex mixture (UCM) in the tar-ball samples. The other possibilities are that the tar-balls may have been originated from the Sumatran oil fields and spillage of domestic oil from oil refineries in Port Dickson and Malacca. The results of PAHs analysis suggest that all the tar-ball samples have undergone various extent of weathering through evaporation, dissolution and photooxidation.

Mapping Global Flows of Chemicals: From Fossil Fuel Feedstocks to Chemical Products.

Science.gov (United States)

Levi, Peter G; Cullen, Jonathan M

2018-02-20

Chemical products are ubiquitous in modern society. The chemical sector is the largest industrial energy consumer and the third largest industrial emitter of carbon dioxide. The current portfolio of mitigation options for the chemical sector emphasizes upstream "supply side" solutions, whereas downstream mitigation options, such as material efficiency, are given comparatively short shrift. Key reasons for this are the scarcity of data on the sector's material flows, and the highly intertwined nature of its complex supply chains. We provide the most up to date, comprehensive and transparent data set available publicly, on virgin production routes in the chemical sector: from fossil fuel feedstocks to chemical products. We map global mass flows for the year 2013 through a complex network of transformation processes, and by taking account of secondary reactants and by-products, we maintain a full mass balance throughout. The resulting data set partially addresses the dearth of publicly available information on the chemical sector's supply chain, and can be used to prioritise downstream mitigation options.

Chemical warfare agents.

Science.gov (United States)

Kuca, Kamil; Pohanka, Miroslav

2010-01-01

Chemical warfare agents are compounds of different chemical structures. Simple molecules such as chlorine as well as complex structures such as ricin belong to this group. Nerve agents, vesicants, incapacitating agents, blood agents, lung-damaging agents, riot-control agents and several toxins are among chemical warfare agents. Although the use of these compounds is strictly prohibited, the possible misuse by terrorist groups is a reality nowadays. Owing to this fact, knowledge of the basic properties of these substances is of a high importance. This chapter briefly introduces the separate groups of chemical warfare agents together with their members and the potential therapy that should be applied in case someone is intoxicated by these agents.

Computer simulation of chemical nucleation

International Nuclear Information System (INIS)

Turner, J.S.

1979-01-01

The problem of nucleation at chemical instabilities is investigated by means of microscopic computer simulation. The first-order transition of interest involves a new kind of nucleation arising from chemical transformations rather than physical forces. Here it is the chemical state of matter, and not matter itself, which is spatially localized to form the nucleus for transition between different chemical states. First, the concepts of chemical instability, nonequilibrium phase transition, and dissipative structure are reviewed briefly. Then recently developed methods of reactive molecular dynamics are used to study chemical nucleation in a simple model chemical reactions. Finally, the connection of these studies to nucleation and condensation processes involving physical and chemical interactions is explored. (orig.)

Book of abstracts Chemical Engineering: IV All-Russian Conference on chemical engineering, All-Russian Youth Conference on chemical engineering, All-Russian school on chemical engineering for young scientists and specialists. Engineering of polymers and composite materials. Catalysis in chemical engineering

International Nuclear Information System (INIS)

Zakhodyaeva, Yu.A.; Belova, V.V.

2012-01-01

In the given volume of abstracts of the IV All-Russian Conference on chemical engineering, All-Russian Youth Conference on chemical engineering, All-Russian school on chemical engineering for young scientists and specialists (Moscow, March 18-23, 2012) there are the abstracts of the reports concerning polymer and composite materials technology as well as catalysis in chemical engineering. The abstracts deal with state-of-the-art and future development of theoretical and experimental investigations as well as with experience in practical realization of development works in the field of chemical engineering and relative areas [ru

Devices for collecting chemical compounds

Science.gov (United States)

Scott, Jill R; Groenewold, Gary S

2013-12-24

A device for sampling chemical compounds from fixed surfaces and related methods are disclosed. The device may include a vacuum source, a chamber and a sorbent material. The device may utilize vacuum extraction to volatilize the chemical compounds from a fixed surface so that they may be sorbed by the sorbent material. The sorbent material may then be analyzed using conventional thermal desorption/gas chromatography/mass spectrometry (TD/GC/MS) instrumentation to determine presence of the chemical compounds. The methods may include detecting release and presence of one or more chemical compounds and determining the efficacy of decontamination. The device may be useful in collection and analysis of a variety of chemical compounds, such as residual chemical warfare agents, chemical attribution signatures and toxic industrial chemicals.

Chemical bond fundamental aspects of chemical bonding

CERN Document Server

Frenking, Gernot

2014-01-01

This is the perfect complement to ""Chemical Bonding - Across the Periodic Table"" by the same editors, who are two of the top scientists working on this topic, each with extensive experience and important connections within the community. The resulting book is a unique overview of the different approaches used for describing a chemical bond, including molecular-orbital based, valence-bond based, ELF, AIM and density-functional based methods. It takes into account the many developments that have taken place in the field over the past few decades due to the rapid advances in quantum chemica

Endocrine Disrupting Chemicals (EDCs)

Science.gov (United States)

... Center Pacientes y Cuidadores Hormones and Health The Endocrine System Hormones Endocrine Disrupting Chemicals (EDCs) Steroid and Hormone ... Hormones and Health › Endocrine Disrupting Chemicals (EDCs) The Endocrine System Hormones Endocrine Disrupting Chemicals (EDCs) EDCs Myth vs. ...

Chemical Weapons Convention

National Research Council Canada - National Science Library

1997-01-01

On April 29, 1997, the Convention on the Prohibition of the Development, Production, Stockpiling, and Use of Chemical Weapons and on Their Destruction, known as the Chemical Weapons Convention (CWC...

Method for offshore loading of a tanker and construction of said tanker. Fremgangsmte og farty for offshore oljelasting

Energy Technology Data Exchange (ETDEWEB)

Lerstad, A.; Breivik, K.; verli, O.; Egge, T.G.; Smedal, A.

1994-07-04

The invention relates to a vessel for offshore loading. The vessel comprises a number of centre tanks arranged in the longitudinal direction of the vessel, and a number of wing tanks located in pairs on either side of respective centre tanks. A loading line is connected to the centre tanks via respective valves, and adjacent centre tanks are connected to each other via bulkhead valves. The method comprises the steps firstly effecting filling of a desired number of the centre tanks. These are substantially narrower and having a correspondingly smaller volume than the wing tanks. Thereafter opening bulkhead valves between a centre tank and an appurtenant wing tank pair and sluicing out oil from centre tanks into the two wing tanks by means of the static pressure from the centre tank. The bulkhead valves between the centre tanks being open, so that the wing tank pair is filled as quickly as possible by suitable operation of the bulkhead valves between the centre tanks and of the valves of the loading line to the centre tanks. Closing the bulkhead valves to the two wing tanks when these and the appurtenant centre tank are filled to a desired level, and repeating the filling process to the steps and successively for additional wing tank pairs after that all centre tanks have been filled again. 10 figs.

Computing Equilibrium Chemical Compositions

Science.gov (United States)

Mcbride, Bonnie J.; Gordon, Sanford

1995-01-01

Chemical Equilibrium With Transport Properties, 1993 (CET93) computer program provides data on chemical-equilibrium compositions. Aids calculation of thermodynamic properties of chemical systems. Information essential in design and analysis of such equipment as compressors, turbines, nozzles, engines, shock tubes, heat exchangers, and chemical-processing equipment. CET93/PC is version of CET93 specifically designed to run within 640K memory limit of MS-DOS operating system. CET93/PC written in FORTRAN.

77 FR 74685 - Chemical Facility Anti-Terrorism Standards (CFATS) Chemical-Terrorism Vulnerability Information...

Science.gov (United States)

2012-12-17

... DEPARTMENT OF HOMELAND SECURITY [Docket No. DHS-2012-0057] Chemical Facility Anti-Terrorism Standards (CFATS) Chemical- Terrorism Vulnerability Information (CVI) AGENCY: National Protection and...: Comments that include trade secrets, confidential commercial or financial information, Chemical-terrorism...

Islamic State and Chemical Weapons

Directory of Open Access Journals (Sweden)

Lukáš Rafay

2016-09-01

Full Text Available The article deals with topic of Islamic State and chemical weapons. The issue is analysed in three dimensions: origin of used chemical weapons and possibility of independent production; known chemical attacks and tactical regularities in their execution; and traits of future chemical terrorist attacks. By providing a thorough examination of the problem, the article aims at predicting the future development of the group’s chemical program as well as describing any prospective chemical terrorist attacks in Europe

Chemical kinetics of gas reactions

CERN Document Server

Kondrat'Ev, V N

2013-01-01

Chemical Kinetics of Gas Reactions explores the advances in gas kinetics and thermal, photochemical, electrical discharge, and radiation chemical reactions. This book is composed of 10 chapters, and begins with the presentation of general kinetic rules for simple and complex chemical reactions. The next chapters deal with the experimental methods for evaluating chemical reaction mechanisms and some theories of elementary chemical processes. These topics are followed by discussions on certain class of chemical reactions, including unimolecular, bimolecular, and termolecular reactions. The rema

Coupling chemical and biological catalysis: a flexible paradigm for producing biobased chemicals.

Science.gov (United States)

Schwartz, Thomas J; Shanks, Brent H; Dumesic, James A

2016-04-01

Advances in metabolic engineering have allowed for the development of new biological catalysts capable of selectively de-functionalizing biomass to yield platform molecules that can be upgraded to biobased chemicals using high efficiency continuous processing allowed by heterogeneous chemical catalysis. Coupling these disciplines overcomes the difficulties of selectively activating COH bonds by heterogeneous chemical catalysis and producing petroleum analogues by biological catalysis. We show that carboxylic acids, pyrones, and alcohols are highly flexible platforms that can be used to produce biobased chemicals by this approach. More generally, we suggest that molecules with three distinct functionalities may represent a practical upper limit on the extent of functionality present in the platform molecules that serve as the bridge between biological and chemical catalysis. Copyright © 2016 Elsevier Ltd. All rights reserved.

78 FR 16698 - Chemical Facility Anti-Terrorism Standards (CFATS) Chemical-Terrorism Vulnerability Information...

Science.gov (United States)

2013-03-18

... DEPARTMENT OF HOMELAND SECURITY [Docket No. DHS-2012-0057] Chemical Facility Anti-Terrorism Standards (CFATS) Chemical- Terrorism Vulnerability Information (CVI) AGENCY: National Protection and... notice is also soliciting comments concerning the Information Collection Request, Chemical Facility Anti...

Chemical evolutionary games.

Science.gov (United States)

Aristotelous, Andreas C; Durrett, Richard

2014-05-01

Inspired by the use of hybrid cellular automata in modeling cancer, we introduce a generalization of evolutionary games in which cells produce and absorb chemicals, and the chemical concentrations dictate the death rates of cells and their fitnesses. Our long term aim is to understand how the details of the interactions in a system with n species and m chemicals translate into the qualitative behavior of the system. Here, we study two simple 2×2 games with two chemicals and revisit the two and three species versions of the one chemical colicin system studied earlier by Durrett and Levin (1997). We find that in the 2×2 examples, the behavior of our new spatial model can be predicted from that of the mean field differential equation using ideas of Durrett and Levin (1994). However, in the three species colicin model, the system with diffusion does not have the coexistence which occurs in the lattices model in which sites interact with only their nearest neighbors. Copyright © 2014 Elsevier Inc. All rights reserved.

THE USE OF CHEMICALS AS PLANT REGULATORS. AGRICULTURAL CHEMICALS TECHNOLOGY, NUMBER 8.

Science.gov (United States)

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

ONE OF A SERIES DESIGNED TO ASSIST TEACHERS IN PREPARING POST-SECONDARY STUDENTS FOR AGRICULTURAL CHEMICAL OCCUPATIONS, THIS MODULE IS SPECIFICALLY CONCERNED WITH CHEMICALS AS PLANT REGULATORS. IT WAS DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF DATA FROM STATE STUDIES. SECTIONS INCLUDE -- (1) CHEMICALS AS MODIFIERS OF PLANT GROWTH, (2)…

Transport woes threaten California production

International Nuclear Information System (INIS)

Anon.

1994-01-01

California oil producers face a loss of production this year because of constraints on pipeline and tanker transportation to Los Angeles area refineries. The potential bottleneck is occurring at a time when Outer Continental Shelf production is near capacity from Chevron Corp.'s Point Arguello project at the same time production is increasing from Exxon Corp.'s nearby Santa Ynex Unit (SYU) expansion. Both megaprojects must compete for pipeline space with onshore crude producers, notably in California's San Joaquin Valley (SJV). Recent development limiting transportation options include: An indefinite shutdown of Four Corners Pipe Line Co.'s 50,000 b/d Line No. 1, damaged by the Jan. 17 earthquake; Loss of a tanker permit by Chevron and partners for offshore Point Arguello production; Permanent shutdown of Exxon's offshore storage and treatment (OST) facility, which since 1981 has used tankers to transport about 20,000 b/d of SYU production from the Santa Barbara Channel to Los Angeles. The OST, the first commercial floating production system in the US -- placed in the Santa Barbara Channel in 1981 after a decade of precedent setting legal and political battles -- was shut down Apr. 4. The paper discusses these production concerns, available options, the OST shutdown, and the troubled history of the OST

Influences of chemical and non-chemical stressors on childhood obesity

Science.gov (United States)

Background/Aim: Children are exposed to diverse chemical and non-chemical stressors in their built, natural, and social environments; and these are thought to contribute to their health and well-being during each developmental stage throughout life. Here we focus on growing evide...

Chemicals Industry Vision

Energy Technology Data Exchange (ETDEWEB)

none,

1996-12-01

Chemical industry leaders articulated a long-term vision for the industry, its markets, and its technology in the groundbreaking 1996 document Technology Vision 2020 - The U.S. Chemical Industry. (PDF 310 KB).

HF/DF chemical labs

International Nuclear Information System (INIS)

Meinzer, R.A.

1987-01-01

This paper provides the essential details to understand and design HF/DF and related types of chemical lasers. The basic operation of the HF/DF chemical laser is described. The details of the excitation chemistry are presented and the pertinent laser physics is described. A description of the various laser components is given and the analytical models for the HF/DF chemical laser are discussed. A brief description of the chain reaction HF/DF chemical laser is offered

CHEMICAL STORAGE: MYTHS VERSUS REALITY

International Nuclear Information System (INIS)

Simmons, F.

2007-01-01

A large number of resources explaining proper chemical storage are available. These resources include books, databases/tables, and articles that explain various aspects of chemical storage including compatible chemical storage, signage, and regulatory requirements. Another source is the chemical manufacturer or distributor who provides storage information in the form of icons or color coding schemes on container labels. Despite the availability of these resources, chemical accidents stemming from improper storage, according to recent reports (1) (2), make up almost 25% of all chemical accidents. This relatively high percentage of chemical storage accidents suggests that these publications and color coding schemes although helpful, still provide incomplete information that may not completely mitigate storage risks. This manuscript will explore some ways published storage information may be incomplete, examine the associated risks, and suggest methods to help further eliminate chemical storage risks

Improving sustainability of maritime transport through utilization of Liquefied Natural Gas (LNG) for propulsion

International Nuclear Information System (INIS)

Burel, Fabio; Taccani, Rodolfo; Zuliani, Nicola

2013-01-01

Today, most merchant vessels use Heavy Fuel Oils (HFOs) for ship propulsion. These fuels are cost effective but they produce significant amounts of noxious emissions. In order to comply with International Maritime Organization (IMO) rules, Liquefied Natural Gas (LNG) is becoming an interesting option for merchant ships. The aim of the research presented in this paper is to analyse the economic upturn that can result from the use of LNG as fuel for merchant ships and to assess the effects of its utilization in terms of environmental impact. In the first part of the study, a statistical analysis of maritime traffic is carried out in order to identify which merchant ship types could most benefit from using LNG as fuel for ship propulsion. Traffic data of world ships related to the months of May 2008, 2009 and 2010 are analysed. Roll-on/Roll-off vessels (RoRo) and tanker ships spend most of their sailing time in Emission Control Areas (ECA) consequently appear to be the best candidates for LNG use. In particular, the use of LNG is most profitable for tanker ships in the range of 10,000–60,000 DWT (deadweight). In the second part of the study, operational costs and pollutant emission reduction, following LNG implementation, are calculated for a 33,000 DWT tanker ship. Results show that LNG leads to a reduction of 35% of operational costs and 25% of CO 2 emissions. The possibility of improving energy efficiency on board is analysed considering that combustion gases, produced by LNG, are cleaner, thus simplifying the introduction of exhaust gas heat recovery. Two options are considered: simple heat recovery and heat recovery to drive a turbine (ORC). The results show that it is possible to achieve a reduction in fuel consumption of up to 15%. - Highlights: • Ship propulsion accounts for a large amount of noxious emissions in costal/harbour areas. • Today price differential between fuel oil and natural gas is increasing. • The use of Liquefied Natural Gas as fuel

Chemical sensors

International Nuclear Information System (INIS)

Hubbard, C.W.; Gordon, R.L.

1987-05-01

The revolution in analytical chemistry promised by recent developments in the field of chemical sensors has potential for significant positive impact on both research and production activities conducted by and for the Department of Energy. Analyses which were, in the past, performed only with a roomful of expensive equipment can now be performed with miniature solid-state electronic devices or small optical probes. Progress in the development of chemical sensors has been rapid, and the field is currently growing at a great rate. In accordance, Pacific Northwest Laboratory initiated a survey of recent literature so that contributors to active programs in research on analytical methods could be made aware of principles and applications of this new technology. This report presents the results of that survey. The sensors discussed here are divided into three types: micro solid-state devices, optical sensors, and piezoelectric crystal devices. The report is divided into three corresponding sections. The first section, ''Micro Solid-State Devices,'' discusses the design, operation, and application of electronic sensors that are produced in much the same way as standard solid-state electronic devices. The second section, ''Optrodes,'' covers the design and operation of chemical sensors that use fiber optics to detect chemically induced changes in optical properties. The final section, ''Piezoelectric Crystal Detectors,'' discusses two types of chemical sensors that depend on the changes in the properties of an oscillating piezoelectric crystal to detect the presence of certain materials. Advantages and disadvantages of each type of sensor are summarized in each section

Chemical shift imaging: a review

International Nuclear Information System (INIS)

Brateman, L.

1986-01-01

Chemical shift is the phenomenon that is seen when an isotope possessing a nuclear magnetic dipole moment resonates at a spectrum of resonance frequencies in a given magnetic field. These resonance frequencies, or chemical shifts, depend on the chemical environments of particular nuclei. Mapping the spatial distribution of nuclei associated with a particular chemical shift (e.g., hydrogen nuclei associated with water molecules or with lipid groups) is called chemical shift imaging. Several techniques of proton chemical shift imaging that have been applied in vivo are presented, and their clinical findings are reported and summarized. Acquiring high-resolution spectra for large numbers of volume elements in two or three dimensions may be prohibitive because of time constraints, but other methods of imaging lipid of water distributions (i.e., selective excitation, selective saturation, or variations in conventional magnetic resonance imaging pulse sequences) can provide chemical shift information. These techniques require less time, but they lack spectral information. Since fat deposition seen by chemical shift imaging may not be demonstrated by conventional magnetic resonance imaging, certain applications of chemical shift imaging, such as in the determination of fatty liver disease, have greater diagnostic utility than conventional magnetic resonance imaging. Furthermore, edge artifacts caused by chemical shift effects can be eliminated by certain selective methods of data acquisition employed in chemical shift imaging

Environmental Chemicals in Breast Milk

Science.gov (United States)

Most of the information available on environmental chemicals in breast milk is focused on persistent, lipophilic chemicals; the database on levels of these chemicals has expanded substantially since the 1950s. Currently, various types of chemicals are measured in breast milk and ...

Conversion of associated natural gas to liquid hydrocarbons. Final report, June 1, 1995--January 31, 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

The original concept envisioned for the use of Fischer-Tropsch processing (FTP) of United States associated natural gas in this study was to provide a way of utilizing gas which could not be brought to market because a pipeline was not available or for which there was no local use. Conversion of gas by FTP could provide a means of utilizing offshore associated gas which would not require installation of a pipeline or re-injection. The premium quality F-T hydrocarbons produced by conversion of the gas can be transported in the same way as the crude oil or in combination (blended) with it, eliminating the need for a separate gas transport system. FTP will produce a synthetic crude oil, thus increasing the effective size of the resource. The two conventional approaches currently used in US territory for handling of natural gas associated with crude petroleum production are re-injection and pipelining. Conversion of natural gas to a liquid product which can be transported to shore by tanker can be accomplished by FTP to produce hydrocarbons, or by conversion to chemical products such as methanol or ammonia, or by cryogenic liquefaction (LNG). This study considers FTP and briefly compares it to methanol and LNG. The Energy International Corporation cobalt catalyst, ratio adjusted, slurry bubble column F-T process was used as the basis for the study and the comparisons. An offshore F-T plant can best be accommodated by an FPSO (Floating Production, Storage, Offloading vessel) based on a converted surplus tanker, such as have been frequently used around the world recently. Other structure types used in deep water (platforms) are more expensive and cannot handle the required load.

Global Controllability of Chemical Reactions

OpenAIRE

Drexler, Dániel András; Tóth, János

2015-01-01

Controllability of chemical reactions is an important problem in chemical engineering science. In control theory, analysis of the controllability of linear systems is well-founded, however the dynamics of chemical reactions is usually nonlinear. Global controllability properties of chemical reactions are analyzed here based on the Lie-algebra of the vector fields associated to elementary reactions. A chemical reaction is controllable almost everywhere if all the reaction rate coefficients can...

Liquefied Gaseous Fuels Safety and Environmental Control Assessment Program: second status report

Energy Technology Data Exchange (ETDEWEB)

None

1980-10-01

Volume 2 consists of 19 reports describing technical effort performed by Government Contractors in the area of LNG Safety and Environmental Control. Report topics are: simulation of LNG vapor spread and dispersion by finite element methods; modeling of negatively buoyant vapor cloud dispersion; effect of humidity on the energy budget of a liquefied natural gas (LNG) vapor cloud; LNG fire and explosion phenomena research evaluation; modeling of laminar flames in mixtures of vaporized liquefied natural gas (LNG) and air; chemical kinetics in LNG detonations; effects of cellular structure on the behavior of gaseous detonation waves under transient conditions; computer simulation of combustion and fluid dynamics in two and three dimensions; LNG release prevention and control; the feasibility of methods and systems for reducing LNG tanker fire hazards; safety assessment of gelled LNG; and a four band differential radiometer for monitoring LNG vapors.

Apparatus for chemical synthesis

Science.gov (United States)

Kong, Peter C [Idaho Falls, ID; Herring, J Stephen [Idaho Falls, ID; Grandy, Jon D [Idaho Falls, ID

2011-05-10

A method and apparatus for forming a chemical hydride is described and which includes a pseudo-plasma-electrolysis reactor which is operable to receive a solution capable of forming a chemical hydride and which further includes a cathode and a movable anode, and wherein the anode is moved into and out of fluidic, ohmic electrical contact with the solution capable of forming a chemical hydride and which further, when energized produces an oxygen plasma which facilitates the formation of a chemical hydride in the solution.

Introduction to chemical kinetics

CERN Document Server

Soustelle, Michel

2013-01-01

This book is a progressive presentation of kinetics of the chemical reactions. It provides complete coverage of the domain of chemical kinetics, which is necessary for the various future users in the fields of Chemistry, Physical Chemistry, Materials Science, Chemical Engineering, Macromolecular Chemistry and Combustion. It will help them to understand the most sophisticated knowledge of their future job area. Over 15 chapters, this book present the fundamentals of chemical kinetics, its relations with reaction mechanisms and kinetic properties. Two chapters are then devoted to experimental re

Book of abstracts Chemical Engineering: IV All-Russian Conference on chemical engineering, All-Russian Youth Conference on chemical engineering, All-Russian school on chemical engineering for young scientists and specialists. Organic substances and pharmaceuticals engineering. Petrochemistry and chemical processing of alternative feedstock

International Nuclear Information System (INIS)

Zakhodyaeva, Yu.A.; Belova, V.V.

2012-01-01

In the given volume of abstracts of the IV All-Russian Conference on chemical engineering, All-Russian Youth Conference on chemical engineering, All-Russian school on chemical engineering for young scientists and specialists (Moscow, March 18-23, 2012) there are the abstracts of the reports concerning organic substances and pharmaceuticals engineering, petrochemistry and chemical processing of alternative feedstock. The abstracts deal with state-of-the-art and future development of theoretical and experimental investigations as well as with experience in practical realization of development works in the field of chemical engineering and relative areas [ru

Risk assessment of chemicals in foundries: The International Chemical Toolkit pilot-project

International Nuclear Information System (INIS)

Ribeiro, Marcela G.; Filho, Walter R.P.

2006-01-01

In Brazil, problems regarding protection from hazardous substances in small-sized enterprises are similar to those observed in many other countries. Looking for a simple tool to assess and control such exposures, FUNDACENTRO has started in 2005 a pilot-project to implement the International Chemical Control Toolkit. During the series of visits to foundries, it was observed that although many changes have occurred in foundry technology, occupational exposures to silica dust and metal fumes continue to occur, due to a lack of perception of occupational exposure in the work environment. After introducing the Chemical Toolkit concept to the foundry work group, it was possible to show that the activities undertaken to improve the management of chemicals, according to its concept, will support companies in fulfilling government legislations related to chemical management, occupational health and safety, and environmental impact. In the following meetings, the foundry work group and FUNDACENTRO research team will identify 'inadequate work situations'. Based on the Chemical Toolkit, improvement measures will be proposed. Afterwards, a survey will verify the efficency of those measures in the control of hazards and consequently on the management of chemicals. This step is now in course

Chemical Transformation Simulator

Science.gov (United States)

The Chemical Transformation Simulator (CTS) is a web-based, high-throughput screening tool that automates the calculation and collection of physicochemical properties for an organic chemical of interest and its predicted products resulting from transformations in environmental sy...

Metal-organic frameworks for the removal of toxic industrial chemicals and chemical warfare agents.

Science.gov (United States)

Bobbitt, N Scott; Mendonca, Matthew L; Howarth, Ashlee J; Islamoglu, Timur; Hupp, Joseph T; Farha, Omar K; Snurr, Randall Q

2017-06-06

Owing to the vast diversity of linkers, nodes, and topologies, metal-organic frameworks can be tailored for specific tasks, such as chemical separations or catalysis. Accordingly, these materials have attracted significant interest for capture and/or detoxification of toxic industrial chemicals and chemical warfare agents. In this paper, we review recent experimental and computational work pertaining to the capture of several industrially-relevant toxic chemicals, including NH 3 , SO 2 , NO 2 , H 2 S, and some volatile organic compounds, with particular emphasis on the challenging issue of designing materials that selectively adsorb these chemicals in the presence of water. We also examine recent research on the capture and catalytic degradation of chemical warfare agents such as sarin and sulfur mustard using metal-organic frameworks.

Chemical warfare agents

Directory of Open Access Journals (Sweden)

Vijayaraghavan R

2010-01-01

Full Text Available Among the Weapons of Mass Destruction, chemical warfare (CW is probably one of the most brutal created by mankind in comparison with biological and nuclear warfare. Chemical weapons are inexpensive and are relatively easy to produce, even by small terrorist groups, to create mass casualties with small quantities. The characteristics of various CW agents, general information relevant to current physical as well as medical protection methods, detection equipment available and decontamination techniques are discussed in this review article. A brief note on Chemical Weapons Convention is also provided.

Chemical warfare agents

Science.gov (United States)

Ganesan, K.; Raza, S. K.; Vijayaraghavan, R.

2010-01-01

Among the Weapons of Mass Destruction, chemical warfare (CW) is probably one of the most brutal created by mankind in comparison with biological and nuclear warfare. Chemical weapons are inexpensive and are relatively easy to produce, even by small terrorist groups, to create mass casualties with small quantities. The characteristics of various CW agents, general information relevant to current physical as well as medical protection methods, detection equipment available and decontamination techniques are discussed in this review article. A brief note on Chemical Weapons Convention is also provided. PMID:21829312

Multiple chemical sensitivity

DEFF Research Database (Denmark)

Tran, Marie Thi Dao; Arendt-Nielsen, Lars; Kupers, Ron

2013-01-01

BACKGROUND: Multiple Chemical Sensitivity (MCS) is a chronic condition characterized by recurrent, non-specific symptoms in response to chemically unrelated exposures in non-toxic concentrations. Although the pathophysiology of MCS remains unknown, central sensitization may be an important factor...

Chemical cleaning review

International Nuclear Information System (INIS)

Dow, B.L.; Thomas, R.C.

1995-01-01

Three main chemical processes for cleaning steam generators have evolved from the early work of the industry. Of the more than 50 chemical cleanings carried out to date most have been considered a success by the utilities performing them. (author)

Chemical Risk Assessment

Science.gov (United States)

This course is aimed at providing an overview of the fundamental guiding principles and general methods used in chemical risk assessment. Chemical risk assessment is a complex and ever-evolving process. These principles and methods have been organized by the National Research Cou...

Introduction to the Chemical Management System

International Nuclear Information System (INIS)

Sawyer, J.G.

1993-01-01

The CMS, a Laboratory-wide electronic chemical inventory tracking system, will assist PNL by establishing comprehensive, integrated, Laboratory-wide databases supported by consistent and standardized procedures for chemical inventory management. It will provide PNL with the information needed to meet its current chemical management responsibilities and regulatory requirements. Its objectives are to provide an inventory of all chemicals being held at PNL facilities, to provide a specific location for all chemical containers, to ensure that health and safety regulatory codes are being upheld, and to provide PNL staff and managers with hazardous-chemical information for better inventory management. It is composed of 5 modules: chemical purchasing; chemical inventory; chemical names, properties, and hazardous groups; reporting; and system manager

QUIC: a chemical kinetics code for use with the chemical equilibrium code QUIL

International Nuclear Information System (INIS)

Lunsford, J.L.

1977-10-01

A chemical rate kinetics code QUIC is described, along with a support code RATE. QUIC is designed to allow chemical kinetics calculations on a wide variety of chemical environments while operating in the overlay environment of the chemical equilibrium code QUIL. QUIC depends upon a rate-data library called LIBR. This library is maintained by RATE. RATE enters into the library all reactions in a standardized format. The code QUIC, operating in conjunction with QUIL, is interactive and written to be used from a remote terminal, with paging control provided. Plotted output is also available

Toxic industrial chemicals and chemical weapons: exposure, identification, and management by syndrome.

Science.gov (United States)

Tomassoni, Anthony J; French, Robert N E; Walter, Frank G

2015-02-01

Toxidromes aid emergency care providers in the context of the patient presenting with suspected poisoning, unexplained altered mental status, unknown hazardous materials or chemical weapons exposure, or the unknown overdose. The ability to capture an adequate chemical exposure history and to recognize toxidromes may reduce dependence on laboratory tests, speed time to delivery of specific antidote therapy, and improve selection of supportive care practices tailored to the etiologic agent. This article highlights elements of the exposure history and presents selected toxidromes that may be caused by toxic industrial chemicals and chemical weapons. Specific antidotes for toxidromes and points regarding their use, and special supportive measures, are presented. Copyright © 2015 Elsevier Inc. All rights reserved.

A Java Chemical Structure Editor Supporting the Modular Chemical Descriptor Language (MCDL

Directory of Open Access Journals (Sweden)

Andrei A. Gakh

2006-03-01

Full Text Available A compact Modular Chemical Descriptor Language (MCDL chemical structure editor (Java applet is described. The small size (approximately 200 KB of the applet allows its use to display and edit chemical structures in various Internet applications. The editor supports the MCDL format, in which structures are presented in compact canonical form and is capable of restoring bond orders as well as of managing atom and bond drawing overlap. A small database of cage and large cyclic fragment is used for optimal representation of difficult-to-draw molecules. The improved algorithm of the structure diagram generation can be used for other chemical notations that lack atomic coordinates (SMILES, InChI.

Chapter 7. Monitoring of chemical contamination of the environment and analytical-chemical monitoring

International Nuclear Information System (INIS)

Sojak, L.

2006-01-01

This chapter deals with the monitoring of chemical contamination of the environment and analytical-chemical monitoring. There are presented: the concept o monitoring of the environment of the Slovak Republic; unified monitoring system and complex information about state and development of the environment; analytical methods determination of chemical contaminants in the environment

A New Paradigm for Chemical Engineering?

DEFF Research Database (Denmark)

Gani, Rafiqul

evidence of this change comes from the jobs taken by graduating chemical engineering professionals in North America, Europe, and some of the Asian countries. In terms of where the graduating chemical engineers are going to work, a clear shift from the commodity chemical industry to the product oriented...... businesses has been observed. There is an increasing trend within the chemical industry to focus on products and the sustainable processes that can make them. Do these changes point to a paradigm shift in chemical engineering as a discipline? Historically, two previous paradigm shifts in chemical engineering...... corresponded to major shifts in chemical engineering as a discipline, which affected not only the education of chemical engineers, but also the development of chemical engineering as a discipline. Has the time come for a new paradigm shift that will prepare the current and future chemical engineering graduates...

Chemical Gel for Surface Decontamination

International Nuclear Information System (INIS)

Jung, Chong Hun; Moon, J. K.; Won, H. J.; Lee, K. W.; Kim, C. K.

2010-01-01

Many chemical decontamination processes operate by immersing components in aggressive chemical solutions. In these applications chemical decontamination technique produce large amounts of radioactive liquid waste. Therefore it is necessary to develop processes using chemical gels instead of chemical solutions, to avoid the well-known disadvantages of chemical decontamination techniques while retaining their high efficiency. Chemical gels decontamination process consists of applying the gel by spraying it onto the surface of large area components (floors, walls, etc) to be decontaminated. The gel adheres to any vertical or complex surface due to their thixotropic properties and operates by dissolving the radioactive deposit, along with a thin layer of the gel support, so that the radioactivity trapped at the surface can be removed. Important aspects of the gels are that small quantities can be used and they show thixitropic properties : liquid during spraying, and solid when stationary, allowing for strong adherence to surfaces. This work investigates the decontamination behaviors of organic-based chemical gel for SS 304 metallic surfaces contaminated with radioactive materials

Shuttles set for US Gulf lift off

Energy Technology Data Exchange (ETDEWEB)

DeLuca, Marshall

2002-09-01

The author reports on discussions with two US companies about plans for using shuttle tankers to transport oil from platforms in the Gulf of Mexico to US ports as an alternative to pipeline networks. This follows approval by the US Minerals Management Service for FPSOs in the Gulf. The companies are American Shuttle Tankers and Conoco-owned Seahorse Shuttling and Technology. Because the vessels will enter US ports and operate in US waters, they must conform with the US Jones Act: they must be US-built, US-flagged and manned by US crews. They must also be double-hulled. This increases cost and reduces market opportunities for the vessels outside the US. The article also considers the use of articulated tug barges as another option. (UK)

Chemical systems, chemical contiguity and the emergence of life

Directory of Open Access Journals (Sweden)

Terrence P. Kee

2017-08-01

Full Text Available Charting the emergence of living cells from inanimate matter remains an intensely challenging scientific problem. The complexity of the biochemical machinery of cells with its exquisite intricacies hints at cells being the product of a long evolutionary process. Research on the emergence of life has long been focusing on specific, well-defined problems related to one aspect of cellular make-up, such as the formation of membranes or the build-up of information/catalytic apparatus. This approach is being gradually replaced by a more “systemic” approach that privileges processes inherent to complex chemical systems over specific isolated functional apparatuses. We will summarize the recent advances in system chemistry and show that chemical systems in the geochemical context imply a form of chemical contiguity in the syntheses of the various molecules that precede modern biomolecules.

'Jail break' made by Iraqi oil tankers

International Nuclear Information System (INIS)

Lorenz, A.

2000-01-01

The implications of Iran's policy turn-about of allowing ships smuggling Iraqi crude oil to sail through its coastal waters, out of reach of UN and US ships patrolling the Persian Gulf, are discussed. It is suspected that the change in Iranian policy may be due to the fact that an infusion of Iraqi oil on the international markets would suit Iran's purposes by reducing the need for OPEC to raise production quotas. Iran is known to be opposed to an increase of production by OPEC members. At the same time, developments in US-Iranian relations and in the international oil market also have to be considered as factors influencing the Iranian position on this issue

Chemically-functionalized microcantilevers for detection of chemical, biological and explosive material

Science.gov (United States)

Pinnaduwage, Lal A [Knoxville, TN; Thundat, Thomas G [Knoxville, TN; Brown, Gilbert M [Knoxville, TN; Hawk, John Eric [Olive Branch, MS; Boiadjiev, Vassil I [Knoxville, TN

2007-04-24

A chemically functionalized cantilever system has a cantilever coated on one side thereof with a reagent or biological species which binds to an analyte. The system is of particular value when the analyte is a toxic chemical biological warfare agent or an explosive.

Chemical Equation Balancing.

Science.gov (United States)

Blakley, G. R.

1982-01-01

Reviews mathematical techniques for solving systems of homogeneous linear equations and demonstrates that the algebraic method of balancing chemical equations is a matter of solving a system of homogeneous linear equations. FORTRAN programs using this matrix method to chemical equation balancing are available from the author. (JN)

Potential Impacts of Spilled Hydraulic Fracturing Fluid Chemicals on Water Resources: Types, volumes, and physical-chemical properties of chemicals

Science.gov (United States)

Hydraulic fracturing (HF) fluid chemicals spilled on-site may impact drinking water resources. While chemicals generally make up <2% of the total injected fluid composition by mass, spills may have undiluted concentrations. HF fluids typically consist of a mixture of base flui...

Role of the Chemical Weapons Convention (CWC) in Combating Chemical Terrorism

International Nuclear Information System (INIS)

Matousek, J.

2007-01-01

Main reason for concluding the CWC was preventing use of CWs in hostilities by state actors. Chemical terrorism is a broader phenomenon involving not only misuse of CWs but also of non-weaponised toxic compounds and intended strikes on industrial and social infrastructures with release of toxic, liquefied and inflammable chemicals. Nevertheless, the CWC is an important instrument in combating the most dangerous forms of international chemical terrorism. The effort of OPCW and mainly of SPs national authorities ensure that chemicals produced for peaceful purposes are not misused, provide some guarantees that terrorists will not be able to acquire or make their own CWs. That is why universality of the CWC and respective national implementation measures including comprehensive legislation are of utmost importance. The enforcement by all countries of the CWCs requirement to make the development, production, stockpiling, transfers and use of CWs illegal for anyone means that terrorist could be put on trial for violating the CWC. The OPCWs expertise and knowledge of CWs, verification regime and the system of assistance and protection under the CWC as a reflection of international co-operation are being put to use to prevent and respond to chemical terrorist strikes and thus considerably diminish their potential consequences. It can be added that pursuant to the UN SC Resolution 1540, all nations are obliged to take actions ensuring that non-State actors cannot develop, produce, use or trade CWs in the terms of the CWC. Current status of implementing the CWC is analysed with special emphasis on prevention of and response to terrorist chemical attacks.(author)

Keskkonnaministril pole plaani naftareostusega seoses tagasi astuda / Martin Hanson, Kadi Heinsalu

Index Scriptorium Estoniae

Hanson, Martin, 1984-

2006-01-01

Ministrite kommentaare naftareostust puudutava info edastamise kohta. Vt. samas: Piret Reiljan: Top Tankers Inc. polnud midagi kuulnud oma laevaga juhtunud õnnetusest. Lisa: Õnnetusest laeval tuli teade reedel. Sündmuste kronoloogia

Air Force Posture Statement 2008: Department of Air Force Presentation to the House Armed Services Committee, U.S. House of Representatives, Fiscal Year 2009 Air Force Posture Statement

National Research Council Canada - National Science Library

Wynne, Michael W; Moseley, Michael

2008-01-01

...; Taking Care of Our People; and Preparing for Tomorrow's Challenges. The Air Force's top acquisition priorities specifically begin to address our critical recapitalization and modernization needs the new Tanker (KC-X...

Chemical shift homology in proteins

International Nuclear Information System (INIS)

Potts, Barbara C.M.; Chazin, Walter J.

1998-01-01

The degree of chemical shift similarity for homologous proteins has been determined from a chemical shift database of over 50 proteins representing a variety of families and folds, and spanning a wide range of sequence homologies. After sequence alignment, the similarity of the secondary chemical shifts of C α protons was examined as a function of amino acid sequence identity for 37 pairs of structurally homologous proteins. A correlation between sequence identity and secondary chemical shift rmsd was observed. Important insights are provided by examining the sequence identity of homologous proteins versus percentage of secondary chemical shifts that fall within 0.1 and 0.3 ppm thresholds. These results begin to establish practical guidelines for the extent of chemical shift similarity to expect among structurally homologous proteins

Safety in the Chemical Laboratory: Tested Disposal Methods for Chemical Wastes from Academic Laboratories.

Science.gov (United States)

Armour, M. A.; And Others

1985-01-01

Describes procedures for disposing of dichromate cleaning solution, picric acid, organic azides, oxalic acid, chemical spills, and hydroperoxides in ethers and alkenes. These methods have been tested under laboratory conditions and are specific for individual chemicals rather than for groups of chemicals. (JN)

75 FR 8575 - Testing of Certain High Production Volume Chemicals; Third Group of Chemicals

Science.gov (United States)

2010-02-25

...: Beilstein Database, CRC Handbook of Chemistry and Physics, Hawley's Condensed Chemical Dictionary, Illustrated Handbooks of Physical- Chemical Properties and Environmental Fate for Organic Chemicals, Merck... Coefficient: Method A (40 CFR 799.6755--shake flask). Method B (ASTM E 1147-92(2005)--liquid chromatography...

Identification of chemicals related to the chemical weapons convention during an interlaboratory proficiency test

NARCIS (Netherlands)

Hooijschuur, E.W.J.; Hulst, A.G.; Jong, A.L. de; Reuver, L.P. de; Krimpen, S.H. van; Baar, B.L.M. van; Wils, E.R.J.; Kientz, C.E.; Brinkman, U.A.Th

2002-01-01

In order to test the ability of laboratories to detect and identify chemicals related to the Chemical Weapons Convention (CWC), which prohibits the development, production, stockpiling and use of chemical weapons, and to designate laboratories for this task, the Technical Secretariat of the

Temporal Control over Transient Chemical Systems using Structurally Diverse Chemical Fuels.

Science.gov (United States)

Chen, Jack L-Y; Maiti, Subhabrata; Fortunati, Ilaria; Ferrante, Camilla; Prins, Leonard J

2017-08-25

The next generation of adaptive, intelligent chemical systems will rely on a continuous supply of energy to maintain the functional state. Such systems will require chemical methodology that provides precise control over the energy dissipation process, and thus, the lifetime of the transiently activated function. This manuscript reports on the use of structurally diverse chemical fuels to control the lifetime of two different systems under dissipative conditions: transient signal generation and the transient formation of self-assembled aggregates. The energy stored in the fuels is dissipated at different rates by an enzyme, which installs a dependence of the lifetime of the active system on the chemical structure of the fuel. In the case of transient signal generation, it is shown that different chemical fuels can be used to generate a vast range of signal profiles, allowing temporal control over two orders of magnitude. Regarding self-assembly under dissipative conditions, the ability to control the lifetime using different fuels turns out to be particularly important as stable aggregates are formed only at well-defined surfactant/fuel ratios, meaning that temporal control cannot be achieved by simply changing the fuel concentration. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Chemical and biological weapons

International Nuclear Information System (INIS)

Harris, E.D.

1991-01-01

This paper discusses the prospects of the multilateral negotiations aimed at achieving a complete and total ban on chemical weapons the Chemical Weapons convention (CWC). The control of the proliferation of chemical weapons is no longer just on East-West issue; it is also an issue of concern in Third World Countries, and in some of the wealthier middle eastern nations, such as Kuwait

Chemical process hazards analysis

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-02-01

The Office of Worker Health and Safety (EH-5) under the Assistant Secretary for the Environment, Safety and Health of the US Department (DOE) has published two handbooks for use by DOE contractors managing facilities and processes covered by the Occupational Safety and Health Administration (OSHA) Rule for Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119), herein referred to as the PSM Rule. The PSM Rule contains an integrated set of chemical process safety management elements designed to prevent chemical releases that can lead to catastrophic fires, explosions, or toxic exposures. The purpose of the two handbooks, ``Process Safety Management for Highly Hazardous Chemicals`` and ``Chemical Process Hazards Analysis,`` is to facilitate implementation of the provisions of the PSM Rule within the DOE. The purpose of this handbook ``Chemical Process Hazards Analysis,`` is to facilitate, within the DOE, the performance of chemical process hazards analyses (PrHAs) as required under the PSM Rule. It provides basic information for the performance of PrHAs, and should not be considered a complete resource on PrHA methods. Likewise, to determine if a facility is covered by the PSM rule, the reader should refer to the handbook, ``Process Safety Management for Highly Hazardous Chemicals`` (DOE- HDBK-1101-96). Promulgation of the PSM Rule has heightened the awareness of chemical safety management issues within the DOE. This handbook is intended for use by DOE facilities and processes covered by the PSM rule to facilitate contractor implementation of the PrHA element of the PSM Rule. However, contractors whose facilities and processes not covered by the PSM Rule may also use this handbook as a basis for conducting process hazards analyses as part of their good management practices. This handbook explains the minimum requirements for PrHAs outlined in the PSM Rule. Nowhere have requirements been added beyond what is specifically required by the rule.

76 FR 1067 - Testing of Certain High Production Volume Chemicals; Second Group of Chemicals

Science.gov (United States)

2011-01-07

... Mfg & NOES (number based criteria based criteria significant chemicals (lbs) industrial of workers... 2070-AD16 Testing of Certain High Production Volume Chemicals; Second Group of Chemicals AGENCY... section 4(a)(1)(B) of the Toxic Substances Control Act (TSCA) to require manufacturers, importers, and...

Comparison of Chemical and Physical-chemical Wastewater Discoloring Methods

Directory of Open Access Journals (Sweden)

Durašević, V.

2007-11-01

Full Text Available Today's chemical and physical-chemical wastewater discoloration methods do not completely meet demands regarding degree of discoloration. In this paper discoloration was performed using Fenton (FeSO4 . 7 H2O + H2O2 + H2SO4 and Fenton-like (FeCl3 . 6 H2O + H2O2 + HCOOH chemical methods and physical-chemical method of coagulation/flocculation (using poly-electrolyte (POEL combining anion active coagulant (modified poly-acrylamides and cationic flocculant (product of nitrogen compounds in combination with adsorption on activated carbon. Suitability of aforementioned methods was investigated on reactive and acid dyes, regarding their most common use in the textile industry. Also, investigations on dyes of different chromogen (anthraquinone, phthalocyanine, azo and xanthene were carried out in order to determine the importance of molecular spatial structure. Oxidative effect of Fenton and Fenton-like reagents resulted in decomposition of colored chromogen and high degree of discoloration. However, the problem is the inability of adding POEL in stechiometrical ratio (also present in physical-chemical methods, when the phenomenon of overdosing coagulants occurs in order to obtain a higher degree of discoloration, creating a potential danger of burdening water with POEL. Input and output water quality was controlled through spectrophotometric measurements and standard biological parameters. In addition, part of the investigations concerned industrial wastewaters obtained from dyeing cotton materials using reactive dye (C. I. Reactive Blue 19, a process that demands the use of vast amounts of electrolytes. Also, investigations of industrial wastewaters was labeled as a crucial step carried out in order to avoid serious misassumptions and false conclusions, which may arise if dyeing processes are only simulated in the laboratory.

Chemical effects of ionizing radiation and sonic energy in the context of chemical evolution

International Nuclear Information System (INIS)

Negron Mendoza, A.; Albarran, G.

1992-01-01

Ionizing radiation and sonic energy are considered as sources for chemical evolution processes. These sources have still a modest place in the interdisciplinary approach for the prebiological synthesis of organic compounds. Studies in Radiation Chemistry and Sonochemistry can provide a deeper insight into the chemical processes that may have importance for prebiotic chemistry. The present work concerns the analysis of some chemical reactions induced by ionizing radiation or cavitation in aqueous media that may be relevant to chemical evolution studies. (author)

The TSCA interagency testing committee`s approaches to screening and scoring chemicals and chemical groups: 1977-1983

Energy Technology Data Exchange (ETDEWEB)

Walker, J.D. [Environmental Protection Agency, Washington, DC (United States)

1990-12-31

This paper describes the TSCA interagency testing committee`s (ITC) approaches to screening and scoring chemicals and chemical groups between 1977 and 1983. During this time the ITC conducted five scoring exercises to select chemicals and chemical groups for detailed review and to determine which of these chemicals and chemical groups should be added to the TSCA Section 4(e) Priority Testing List. 29 refs., 1 fig., 2 tabs.

Chemical evolution of galaxies

CERN Document Server

Matteucci, Francesca

2012-01-01

The term “chemical evolution of galaxies” refers to the evolution of abundances of chemical species in galaxies, which is due to nuclear processes occurring in stars and to gas flows into and out of galaxies. This book deals with the chemical evolution of galaxies of all morphological types (ellipticals, spirals and irregulars) and stresses the importance of the star formation histories in determining the properties of stellar populations in different galaxies. The topic is approached in a didactical and logical manner via galaxy evolution models which are compared with observational results obtained in the last two decades: The reader is given an introduction to the concept of chemical abundances and learns about the main stellar populations in our Galaxy as well as about the classification of galaxy types and their main observables. In the core of the book, the construction and solution of chemical evolution models are discussed in detail, followed by descriptions and interpretations of observations of ...

Modern Cast Irons in Chemical Engineering

Science.gov (United States)

1934-11-09

fl’ceew. T I SOCIETY OF CHEMICAL INDUSTRY CHEMICAL ENGINEERING GROUP MODERN CAST IRONS IN CHEMICAL ENGINEERING By J. G. PEARCE, M.Sc., F.Inst.P...CAST IRONS IN CHEMICAL ENGINEERING By J. G. PEARCE, M.Sc., F.Inst.P., M.I.E.E.* INTRODUCTION to chemical or thermal resistance. Small blow-holes Any...consideration of modern cast irons in chemical seldom appear to reduce the mechanical strength of engineering should strictly be prefaced by a definition

Combined chemical shift changes and amino acid specific chemical shift mapping of protein-protein interactions

Energy Technology Data Exchange (ETDEWEB)

Schumann, Frank H.; Riepl, Hubert [University of Regensburg, Institute of Biophysics and Physical Biochemistry (Germany); Maurer, Till [Boehringer Ingelheim Pharma GmbH and Co. KG, Analytical Sciences Department (Germany); Gronwald, Wolfram [University of Regensburg, Institute of Biophysics and Physical Biochemistry (Germany); Neidig, Klaus-Peter [Bruker BioSpin GmbH, Software Department (Germany); Kalbitzer, Hans Robert [University of Regensburg, Institute of Biophysics and Physical Biochemistry (Germany)], E-mail: hans-robert.kalbitzer@biologie.uni-regensburg.de

2007-12-15

Protein-protein interactions are often studied by chemical shift mapping using solution NMR spectroscopy. When heteronuclear data are available the interaction interface is usually predicted by combining the chemical shift changes of different nuclei to a single quantity, the combined chemical shift perturbation {delta}{delta}{sub comb}. In this paper different procedures (published and non-published) to calculate {delta}{delta}{sub comb} are examined that include a variety of different functional forms and weighting factors for each nucleus. The predictive power of all shift mapping methods depends on the magnitude of the overlap of the chemical shift distributions of interacting and non-interacting residues and the cut-off criterion used. In general, the quality of the prediction on the basis of chemical shift changes alone is rather unsatisfactory but the combination of chemical shift changes on the basis of the Hamming or the Euclidian distance can improve the result. The corrected standard deviation to zero of the combined chemical shift changes can provide a reasonable cut-off criterion. As we show combined chemical shifts can also be applied for a more reliable quantitative evaluation of titration data.

Stochastic processes in chemical physics

CERN Document Server

Shuler, K E

2009-01-01

The Advances in Chemical Physics series provides the chemical physics and physical chemistry fields with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series serves as the perfect supplement to any advanced graduate class devoted to the study of chemical physics.

Chemical evolution and life

Directory of Open Access Journals (Sweden)

Malaterre Christophe

2015-01-01

Full Text Available In research on the origins of life, the concept of “chemical evolution” aims at explaining the transition from non-living matter to living matter. There is however strong disagreement when it comes to defining this concept more precisely, and in particular with reference to a chemical form of Darwinian evolution: for some, chemical evolution is nothing but Darwinian evolution applied to chemical systems before life appeared; yet, for others, it is the type of evolution that happened before natural selection took place, the latter being the birthmark of living systems. In this contribution, I review the arguments defended by each side and show how both views presuppose a dichotomous definition of “life”.

Three Packets of Minerals of the Periodic Table of Chemical Elements and Chemical Compounds

OpenAIRE

Labushev, Mikhail M.

2013-01-01

The concepts of alpha- and beta-packets of the periodic table of chemical elements and chemical compounds are defined. The first of the 47 minerals alpha-packets is composed. In it all minerals are arranged in increasing Iav index of proportionality of atomic weights of composing chemical elements, the same way as chemical elements are located in increasing atomic weights in the Periodic table. The packet includes 93 known minerals and two compounds - N2O5 and CO2 - being actually minerals. B...

Chemical Security Analysis Center

Data.gov (United States)

Federal Laboratory Consortium — In 2006, by Presidential Directive, DHS established the Chemical Security Analysis Center (CSAC) to identify and assess chemical threats and vulnerabilities in the...

Revisiting the chemical reactivity indices as the state function derivatives. The role of classical chemical hardness

Energy Technology Data Exchange (ETDEWEB)

Malek, Ali; Balawender, Robert, E-mail: rbalawender@ichf.edu.pl [Institute of Physical Chemistry, Polish Academy of Sciences, Kasprzaka 44/52, PL-01-224 Warsaw (Poland)

2015-02-07

The chemical reactivity indices as the equilibrium state-function derivatives are revisited. They are obtained in terms of the central moments (fluctuation formulas). To analyze the role of the chemical hardness introduced by Pearson [J. Am. Chem. Soc. 105, 7512 (1983)], the relations between the derivatives up to the third-order and the central moments are obtained. As shown, the chemical hardness and the chemical potential are really the principal indices of the chemical reactivity theory. It is clear from the results presented here that the chemical hardness is not the derivative of the Mulliken chemical potential (this means also not the second derivative of the energy at zero-temperature limit). The conventional quadratic dependence of energy, observed at finite temperature, reduces to linear dependence on the electron number at zero-temperature limit. The chemical hardness plays a double role in the admixture of ionic states to the reference neutral state energy: it determines the amplitude of the admixture and regulates the damping of its thermal factor.

Revisiting the chemical reactivity indices as the state function derivatives. The role of classical chemical hardness

International Nuclear Information System (INIS)

Malek, Ali; Balawender, Robert

2015-01-01

The chemical reactivity indices as the equilibrium state-function derivatives are revisited. They are obtained in terms of the central moments (fluctuation formulas). To analyze the role of the chemical hardness introduced by Pearson [J. Am. Chem. Soc. 105, 7512 (1983)], the relations between the derivatives up to the third-order and the central moments are obtained. As shown, the chemical hardness and the chemical potential are really the principal indices of the chemical reactivity theory. It is clear from the results presented here that the chemical hardness is not the derivative of the Mulliken chemical potential (this means also not the second derivative of the energy at zero-temperature limit). The conventional quadratic dependence of energy, observed at finite temperature, reduces to linear dependence on the electron number at zero-temperature limit. The chemical hardness plays a double role in the admixture of ionic states to the reference neutral state energy: it determines the amplitude of the admixture and regulates the damping of its thermal factor

Approach to downstream planning for nearshore response and sensitive areas protection outside Prince William Sound, Alaska

International Nuclear Information System (INIS)

DeCola, E.G.; Robertson, T.L.; Robertson, R.; Banta, J.

2004-01-01

This study assessed the need for an oil spill response plan for downstream coastal communities that could be affected by oil spilled from tankers travelling in Prince William Sound, Alaska. For the purpose of oil spill contingency planning, the State of Alaska has been divided into the Kodiak and Cook Inlet sub-areas that are at risk for downstream impacts from a Prince William Sound oil spill. The 1989 Exxon Valdez oil spill provided an example of a worst-case scenario oil spill from a tanker in Prince William Sound, but the oil spill planning system that has evolved in Alaska does not adequately plan for on oil spill that originates in one sub-area of the state, but impacts other sub-areas in the downstream spill path. This study analyzed the gaps that exist in the current response planning system in the Prince William Sound, Cook Inlet and Kodiak sub-areas. A method was proposed to improve the existing response plans so that emergency response teams are better prepared to manage cross-boundary oil spills originating in Prince William Sound. The proposed method focuses on nearshore response and sensitive areas protection for coastlines and communities that are at risk for oil spills from a tanker travelling the Trans-Alaska Pipeline System (TAPS). 11 refs., 3 figs

Traffic at risk in Mediterranean

International Nuclear Information System (INIS)

Bilardo, U.; Mureddu, G.

1993-01-01

The Mediterranean Sea represents only about 0.7% of the planet's total water surface area, yet it is host to as much as one-quarter of the world's total maritime oil traffic. Statistics indicate that from 47 to 77,000 tonnes of crude oil are now being released annually into the Sea through accidental spills; and over the last decade, its tourism dependent coastlines have been fouled by the highest levels of tar contamination in the world. Oil carrier traffic, routed within the Sea's already overcrowded shipping lanes, is intense and this traffic is expected to increase, as a result of rises in world energy demand, to levels of from 7 to 8 million barrels a day. It has been estimated that, at the end of 1992, 90% of all large tankers operating in this area, will have reached a service life of 15-16 years which is very close to the average recommended life cycle limit of 15-20 years. Only 20% of the world's 3,000 tankers are currently equipped with double bottomed hulls. This paper uses these and other facts and figures to argue that the risks of future severe oil tanker accidents in the Mediterranean Sea are high, and that these must be countered with the development of a new set of stricter marine traffic safety regulations at the Italian, national, as well as, European level

Prevention of oil spill from shipping by modelling of dynamic risk.

Science.gov (United States)

Eide, Magnus S; Endresen, Oyvind; Breivik, Oyvind; Brude, Odd Willy; Ellingsen, Ingrid H; Røang, Kjell; Hauge, Jarle; Brett, Per Olaf

2007-10-01

This paper presents a new dynamic environmental risk model, with intended use within a new, dynamical approach for risk based ship traffic prioritisation. The philosophy behind this newly developed approach is that shipping risk can be reduced by directing efforts towards ships and areas that have been identified as high priority (high risk), prior to a potential accident. The risk model proposed in this paper separates itself from previous models by drawing on available information on dynamic factors and by focusing on the ship's surroundings. The model estimates the environmental risk of drift grounding accidents for oil tankers in real time and in forecast mode, combining the probability of grounding with oil spill impact on the coastline. Results show that the inherent dynamic risk introduced by an oil tanker sailing along the North Norwegian coast depends, not surprisingly, significantly upon wind and ocean currents, as well as tug position and cargo oil type. Results of this study indicate that the risk model is well suited for real time risk assessment, and effectively separates low risk and high risk situations. The model is well suited as a tool to prioritise oil tankers and coastal segments. This enables dynamic risk based positioning of tugs, using both real-time and projected risk, for effective support in case of a drifting ship situation.

Ultrasound in chemical processes

International Nuclear Information System (INIS)

Baig, S.; Farooq, R.; Malik, A.H.

2009-01-01

The use of ultrasound to promote chemical reactions or sono chemistry is a field of chemistry which involves the process of acoustic cavitations i.e. the collapse of microscopic bubbles in liquid. There are two essential components for the application of sono chemistry, a liquid medium and a source of high-energy vibrations. The liquid medium is necessary because sono chemistry is driven by acoustic cavitations that can only occur in liquids. The source of the vibrational energy is the transducer. The chemical effects of ultrasound include the enhancement of reaction rates at ambient temperatures and striking advancements in stoichiometric and catalytic reactions In some cases, ultrasonic irradiation can increase reactivities by nearly million fold. The ultrasound has large number of applications not only in emending old chemical processes but also in developing new synthetic strategies. Ultrasound enhances all chemical and physical processes e.g., crystallization, vitamin synthesis, preparation of catalysts, dissolution of chemicals, organometallic reactions, electrochemical processes, etc. High-power ultrasonics is a new powerful technology that is not only safe and environmentally friendly in its application but is also efficient and economical. It can be applied to existing processes to eliminate the need for chemicals and/or heat application in a variety of industrial processes. (author)

Exploring Chemical Space for Drug Discovery Using the Chemical Universe Database

Science.gov (United States)

2012-01-01

Herein we review our recent efforts in searching for bioactive ligands by enumeration and virtual screening of the unknown chemical space of small molecules. Enumeration from first principles shows that almost all small molecules (>99.9%) have never been synthesized and are still available to be prepared and tested. We discuss open access sources of molecules, the classification and representation of chemical space using molecular quantum numbers (MQN), its exhaustive enumeration in form of the chemical universe generated databases (GDB), and examples of using these databases for prospective drug discovery. MQN-searchable GDB, PubChem, and DrugBank are freely accessible at www.gdb.unibe.ch. PMID:23019491

Teaching and Learning in Chemical Product Engineering - an Evolving par of the Chemical Engineering Curriculum

DEFF Research Database (Denmark)

Vigild, Martin Etchells; Kiil, Søren; Wesselingh, Johannes

2007-01-01

Over the last decade Chemical Product Engineering has evolved as part of the Chemical Engineering Curriculum at several universities in Europe and America. At the DTU Chemical Product Engineering was introduced in 2000. This presentation will report on the experiences gained from teaching classes...... and preparing a text book on the subject. [1] Chemical Product Engineering is solidly based on chemical technical and engineering knowledge. Furthermore, the subject naturally calls for a holistic approach to teaching and learning and introduces elements which target transferable and professional engineering...... skills. Such skills are important in Chemical Product Engineering when dealing with open-ended problems, creative problem solutions, operating in a team working environment and exercising project management. In our course we emphasise team activites, formative feed back to the students as well as helping...

48 CFR 752.247-70 - Preference for privately owned U.S.-flag commercial vessels.

Science.gov (United States)

2010-10-01

... (computed separately for dry bulk carriers, dry cargo liners, and tankers) shall be transported in privately... registry. (iv) Date of loading. (v) Port of loading. (vi) Port of final discharge. (vii) Description of...

Laev pooleks / K. Heinmaa

Index Scriptorium Estoniae

Heinmaa, K.

1982-01-01

Melassi vedanud tanker murdus tormis pooleks, nende omavaheline kaugus oli lõpuks u 100 miili. Hukkus üks inimene, laeva pooled pukseeriti sadamasse kuid otsustati maha kanda, kätte saadi osa melassist

Tobacco and chemicals (image)

Science.gov (United States)

Some of the chemicals associated with tobacco smoke include ammonia, carbon dioxide, carbon monoxide, propane, methane, acetone, hydrogen cyanide and various carcinogens. Other chemicals that are associated with chewing ...

The applications of chemical thermodynamics and chemical kinetics to planetary atmospheres research

Science.gov (United States)

Fegley, Bruce, Jr.

1990-01-01

A review of the applications of chemical thermodynamics and chemical kinetics to planetary atmospheres research during the past four decades is presented with an emphasis on chemical equilibrium models and thermochemical kinetics. Several current problems in planetary atmospheres research such as the origin of the atmospheres of the terrestrial planets, atmosphere-surface interactions on Venus and Mars, deep mixing in the atmospheres of the gas giant planets, and the origin of the atmospheres of outer planet satellites all require laboratory data on the kinetics of thermochemical reactions for their solution.

Hazards in the chemical laboratory

International Nuclear Information System (INIS)

Bretherick, L.

1987-01-01

The contents of this book are: Preface; Introduction; Health and Safety at Work Act 1974; Safety Planning and Management; Fire Protection; Reactive Chemical Hazards; Chemical Hazards and Toxicology; Health Care and First Aid; Hazardous Chemicals; Precautions against Radiations; and An American View

Chemical Waste Management and Disposal.

Science.gov (United States)

Armour, Margaret-Ann

1988-01-01

Describes simple, efficient techniques for treating hazardous chemicals so that nontoxic and nonhazardous residues are formed. Discusses general rules for management of waste chemicals from school laboratories and general techniques for the disposal of waste or surplus chemicals. Lists specific disposal reactions. (CW)

LLNL Chemical Kinetics Modeling Group

Energy Technology Data Exchange (ETDEWEB)

Pitz, W J; Westbrook, C K; Mehl, M; Herbinet, O; Curran, H J; Silke, E J

2008-09-24

The LLNL chemical kinetics modeling group has been responsible for much progress in the development of chemical kinetic models for practical fuels. The group began its work in the early 1970s, developing chemical kinetic models for methane, ethane, ethanol and halogenated inhibitors. Most recently, it has been developing chemical kinetic models for large n-alkanes, cycloalkanes, hexenes, and large methyl esters. These component models are needed to represent gasoline, diesel, jet, and oil-sand-derived fuels.

Chemical defences against herbivores

DEFF Research Database (Denmark)

Pavia, Henrik; Baumgartner, Finn; Cervin, Gunnar

2012-01-01

This chapter focuses on the recent and emerging research involving chemical defences against herbivory in aquatic primary producers. It provides an overview of plant chemical defence theories and highlights recent research on aquatic primary producers addressing a number of aspects...... of these theories, concluding with new chemical approaches to tackle the questions and suggestions for future research directions. It explains that aquatic primary producers are a taxonomically and functionally diverse group of organisms that includes macroalgae, microalgae, and vascular plants. It also states...... that despite the fact that aquatic primary producers constitute a large and diverse group of organisms that vary in their evolutionary histories, selection for chemical defences to resist or reduce grazing are commonplace across the phylogenetic boundaries....

Chemical Microsensors For Detection Of Explosives And Chemical Warfare Agents

Science.gov (United States)

Yang, Xiaoguang; Swanson, Basil I.

2001-11-13

An article of manufacture is provided including a substrate having an oxide surface layer and a layer of a cyclodextrin derivative chemically bonded to said substrate, said layer of a cyclodextrin derivative adapted for the inclusion of selected compounds, e.g., nitro-containing organic compounds, therewith. Such an article can be a chemical microsensor capable of detecting a resultant mass change from inclusion of the nitro-containing organic compound.

An extended chemical analysis of gallstone

OpenAIRE

Chandran, P.; Kuchhal, N. K.; Garg, P.; Pundir, C. S.

2007-01-01

Chemical composition of gall stones is essential for aetiopathogensis of gallstone disease. We have reported quantitative chemical analysis of total cholesterol bilirubin, calcium, iron and inorganic phosphate in 120 gallstones from haryana. To extend this chemical analysis of gall stones by studying more cases and by analyzing more chemical constituents. A quantitative chemical analysis of total cholesterol, total bilirubin, fatty acids, triglycerides, phospholipids, bile acids, soluble prot...

Meta-Analysis of the Chemical and Non-Chemical Stressors Affecting Childhood Obesity

Science.gov (United States)

Worldwide, approximately 42 million children under the age of 5 years are considered overweight or obese. While much research has focused on individual behaviors impacting obesity, little research has emphasized the complex interactions of numerous chemical and non-chemical stres...

Identifying the source of tar balls deposited along the beaches of Goa in 2013 and comparing with historical data collected along the West Coast of India

Energy Technology Data Exchange (ETDEWEB)

Suneel, V., E-mail: vasimallas@nio.org [CSIR-National Institute of Oceanography, Dona Paula, Goa 403004 (India); Vethamony, P., E-mail: mony@nio.org [CSIR-National Institute of Oceanography, Dona Paula, Goa 403004 (India); Naik, B.G., E-mail: bgnaik@nio.org [CSIR-National Institute of Oceanography, Dona Paula, Goa 403004 (India); Krishna, M.S., E-mail: moturi@nio.org [CSIR-National Institute of Oceanography, Regional Centre, Visakhapatnam, 530 017 (India); Jadhav, Lakshmikant, E-mail: lakshya87.0@gmail.com [CSIR-National Institute of Oceanography, Dona Paula, Goa 403004 (India)

2015-09-15

Deposition of oil residues, also known as tar balls, is a seasonal phenomenon, and it occurs only in the southwest monsoon season along the west coast of India. This has become a serious environmental issue, as Goa is a global tourist destination. The present work aims at identifying the source oil of the tar balls that consistently depositing along the Goa coast using multi-marker fingerprint technique. In this context, the tar ball samples collected in May 2013 from 9 beaches of Goa coast and crude oils from different oil fields and grounded ship were subject to multi-marker analyses such as n-alkanes, pentacyclic terpanes, regular steranes, compound specific isotope analysis (CSIA) and principle component analysis (PCA). The n-alkane weathering index shows that samples have been weathered to various degrees, and the status of weathering is moderate. Since the international tanker route passes closer to the west coast of India (WCI), it is generally presumed that tanker wash is the source of the tar balls. We found that 2010/2011 tar balls are as tanker wash, but the present study demonstrates that the Bombay High (BH) oil fields can also contribute to oil contamination (tar balls) along ≈ 650 km stretch of the WCI, running from Gujarat in the north to Goa in the south. The simulated trajectories show that all the particles released in April traveled in the southeast direction, and by May, they reached the Goa coast with the influence of circulation of Indian monsoon system. - Highlights: • Multi-marker approach was effective in identifying the source of tar balls. • n-Alkane DRs show weathering effects even within the core of the tar ball. • Tar balls of the west coast of India since 2012 were derived from Bombay High crude. • Tanker-wash is not the only source of tar balls deposited on the beaches of Goa.

Identifying the source of tar balls deposited along the beaches of Goa in 2013 and comparing with historical data collected along the West Coast of India

International Nuclear Information System (INIS)

Suneel, V.; Vethamony, P.; Naik, B.G.; Krishna, M.S.; Jadhav, Lakshmikant

2015-01-01

Deposition of oil residues, also known as tar balls, is a seasonal phenomenon, and it occurs only in the southwest monsoon season along the west coast of India. This has become a serious environmental issue, as Goa is a global tourist destination. The present work aims at identifying the source oil of the tar balls that consistently depositing along the Goa coast using multi-marker fingerprint technique. In this context, the tar ball samples collected in May 2013 from 9 beaches of Goa coast and crude oils from different oil fields and grounded ship were subject to multi-marker analyses such as n-alkanes, pentacyclic terpanes, regular steranes, compound specific isotope analysis (CSIA) and principle component analysis (PCA). The n-alkane weathering index shows that samples have been weathered to various degrees, and the status of weathering is moderate. Since the international tanker route passes closer to the west coast of India (WCI), it is generally presumed that tanker wash is the source of the tar balls. We found that 2010/2011 tar balls are as tanker wash, but the present study demonstrates that the Bombay High (BH) oil fields can also contribute to oil contamination (tar balls) along ≈ 650 km stretch of the WCI, running from Gujarat in the north to Goa in the south. The simulated trajectories show that all the particles released in April traveled in the southeast direction, and by May, they reached the Goa coast with the influence of circulation of Indian monsoon system. - Highlights: • Multi-marker approach was effective in identifying the source of tar balls. • n-Alkane DRs show weathering effects even within the core of the tar ball. • Tar balls of the west coast of India since 2012 were derived from Bombay High crude. • Tanker-wash is not the only source of tar balls deposited on the beaches of Goa

Chlorine leak on Mumbai Port Trust's Sewri yard: A case study

Science.gov (United States)

Sharma, Rakesh Kumar; Chawla, Raman; Kumar, Surendra

2010-01-01

Chemical emergencies involving hazardous chemicals are not uncommon in India. More than 25 incidents have been identified in National Disaster Management Guidelines – Chemical (Industrial) Disaster Management, released in May 2007. In a recent occurrence on the morning of 14 July 2010, nearly at 3:00 a.m., chlorine leak was reported from a gas cylinder referred as turner, weighing about 650 kg, corroding with time at the Haji Bunder hazardous cargo warehouse in Mumbai Port Trust, Sewri, affecting over 120 people in the neighborhood, including students, laborers, port workers and fire fighters, of whom 70 were reported critical. It has been observed to be a blatant case of ignorance and negligence as well as contraventions to the safety and environmental safeguard requirements under existing statues as well as non-maintenance of failsafe conditions at the site requisite for chlorine storage. The analysis revealed significant gaps in the availability of neutralization mechanism and the chlorine stored in open increased the possibility of formation of ingress mixture due to busting of chlorine filled tankers. The Government of India has institutionalized emergency preparedness framework at national, state and district level as envisaged in Disaster Management Act, 2005, to prepare the nation to mitigate such incidences, if all the preventive safety provisions fail. Ministry of Environment and Forests (MoEF) is preparing National Action Plan-Chemical (Industrial) Disaster Management based on National Guidelines to implement all the mechanisms of capacity development across the country. PMID:21829311

Chlorine leak on Mumbai port trust′s Sewri yard: A case study

Directory of Open Access Journals (Sweden)

Rakesh Kumar Sharma

2010-01-01

Full Text Available Chemical emergencies involving hazardous chemicals are not uncommon in India. More than 25 incidents have been identified in National Disaster Management Guidelines - Chemical (Industrial Disaster Management, released in May 2007. In a recent occurrence on the morning of 14 July 2010, nearly at 3:00 a.m., chlorine leak was reported from a gas cylinder referred as turner, weighing about 650 kg, corroding with time at the Haji Bunder hazardous cargo warehouse in Mumbai Port Trust, Sewri, affecting over 120 people in the neighborhood, including students, laborers, port workers and fire fighters, of whom 70 were reported critical. It has been observed to be a blatant case of ignorance and negligence as well as contraventions to the safety and environmental safeguard requirements under existing statues as well as non-maintenance of failsafe conditions at the site requisite for chlorine storage. The analysis revealed significant gaps in the availability of neutralization mechanism and the chlorine stored in open increased the possibility of formation of ingress mixture due to busting of chlorine filled tankers. The Government of India has institutionalized emergency preparedness framework at national, state and district level as envisaged in Disaster Management Act, 2005, to prepare the nation to mitigate such incidences, if all the preventive safety provisions fail. Ministry of Environment and Forests (MoEF is preparing National Action Plan-Chemical (Industrial Disaster Management based on National Guidelines to implement all the mechanisms of capacity development across the country.

Chemical derivatization to enhance chemical/oxidative stability of resorcinol-formaldehyde resin

Energy Technology Data Exchange (ETDEWEB)

Hubler, T.L. [Pacific Northwest National Lab., Richland, WA (United States)

1997-10-01

The goal of this task is to develop modified resorcinol-formaldehyde (R-F) resin to improve the chemical/oxidative stability of the resin. R-F resin is a regenerable organic ion-exchange resin that is selective for cesium ion in highly alkaline, high ionic-strength solutions. R-F resin tends to undergo chemical degradation, reducing its ability to remove cesium ion from waste solutions; the mechanistic details of these decomposition reactions are currently unknown. The approach used for this task is chemical modification of the resin structure, particularly the resorcinol ring unit of the polymer resin. This approach is based on prior characterization studies conducted at Pacific Northwest National Laboratory (PNNL) that indicated the facile chemical degradation of the resin is oxidation of the resorcinol ring to the para-quinone structure, with subsequent loss of ion-exchange sites for cesium ion. R-F resin represents an important alternative to current radiocesium remediation technology for tank wastes at both the Hanford and Savannah River sites, particularly if regenerable resins are needed.

Chemical Industry Bandwidth Study

Energy Technology Data Exchange (ETDEWEB)

none,

2006-12-01

The Chemical Bandwidth Study provides a snapshot of potentially recoverable energy losses during chemical manufacturing. The advantage of this study is the use of "exergy" analysis as a tool for pinpointing inefficiencies.

Chemical cleaning, decontamination and corrosion

International Nuclear Information System (INIS)

Gadiyar, H.S.; Das Chintamani; Gaonkar, K.B.

1991-01-01

Chemical cleaning of process equipments and pipings in chemical/petrochemical industries is necessitated for improving operation, for preventing premature failures and for avoiding contamination. In developing a chemical formulation for cleaning equipments, the important aspects to be considered include (i) effective removal of corrosion products and scales, (ii) minimum corrosion of the base metal, (iii) easy to handle chemicals and (iv) economic viability. As on date, a wide variety of chemical formulations are available, many of them are either proprietory or patented. For evolving an effective formulation, knowledge of the oxides of various metals and alloys on the one hand and acid concentration, complexing agents and inhibitors to be incorporated on the other, is quite essential. Organic acids like citric acid, acetic acid and formic acid are more popular ones, often used with EDTA for effective removal of corrosion products from ferrous components. The report enumerates some of the concepts in developing effective formulations for chemical cleaning of carbon steel components and further, makes an attempt to suggest simple formulations to be developed for chemical decontamination. (author). 6 refs., 3 fi gs., 4 tabs

Incidence and characteristics of chemical burns.

Science.gov (United States)

Koh, Dong-Hee; Lee, Sang-Gil; Kim, Hwan-Cheol

2017-05-01

Chemical burns can lead to serious health outcomes. Previous studies about chemical burns have been performed based on burn center data so these studies have provided limited information about the incidence of chemical burns at the national level. The aim of this study was to evaluate the incidence and characteristics of chemical burns using nationwide databases. A cohort representing the Korean population, which was established using a national health insurance database, and a nationwide workers' compensation database were used to evaluate the incidence and characteristics of chemical burns. Characteristics of the affected body region, depth of burns, industry, task, and causative agents were analyzed from two databases. The incidence of chemical burns was calculated according to employment status. The most common regions involving chemical burns with hospital visits were the skin followed by the eyes. For skin lesions, the hands and wrists were the most commonly affected regions. Second degree burns were the most common in terms of depth of skin lesions. The hospital visit incidence was 1.96 per 10,000 person-year in the general population. The compensated chemical burns incidence was 0.17 per 10,000 person-year. Employees and the self-employed showed a significantly increased risk of chemical burns undergoing hospital visits compared to their dependents. Chemical burns on the skin and eyes are almost equally prevalent. The working environment was associated with increased risk of chemical burns. Our results may aid in estimating the size of the problem and prioritizing prevention of chemical burns. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Chemical Search Web Utility

Data.gov (United States)

U.S. Environmental Protection Agency — The Chemical Search Web Utility is an intuitive web application that allows the public to easily find the chemical that they are interested in using, and which...

Extracting and connecting chemical structures from text sources using chemicalize.org.

Science.gov (United States)

Southan, Christopher; Stracz, Andras

2013-04-23

Exploring bioactive chemistry requires navigating between structures and data from a variety of text-based sources. While PubChem currently includes approximately 16 million document-extracted structures (15 million from patents) the extent of public inter-document and document-to-database links is still well below any estimated total, especially for journal articles. A major expansion in access to text-entombed chemistry is enabled by chemicalize.org. This on-line resource can process IUPAC names, SMILES, InChI strings, CAS numbers and drug names from pasted text, PDFs or URLs to generate structures, calculate properties and launch searches. Here, we explore its utility for answering questions related to chemical structures in documents and where these overlap with database records. These aspects are illustrated using a common theme of Dipeptidyl Peptidase 4 (DPPIV) inhibitors. Full-text open URL sources facilitated the download of over 1400 structures from a DPPIV patent and the alignment of specific examples with IC50 data. Uploading the SMILES to PubChem revealed extensive linking to patents and papers, including prior submissions from chemicalize.org as submitting source. A DPPIV medicinal chemistry paper was completely extracted and structures were aligned to the activity results table, as well as linked to other documents via PubChem. In both cases, key structures with data were partitioned from common chemistry by dividing them into individual new PDFs for conversion. Over 500 structures were also extracted from a batch of PubMed abstracts related to DPPIV inhibition. The drug structures could be stepped through each text occurrence and included some converted MeSH-only IUPAC names not linked in PubChem. Performing set intersections proved effective for detecting compounds-in-common between documents and merged extractions. This work demonstrates the utility of chemicalize.org for the exploration of chemical structure connectivity between documents and

Recommended inorganic chemicals for calibration

International Nuclear Information System (INIS)

Moody, J.R.; Greenberg, R.R.; Pratt, K.W.; Rains, T.C.

1988-01-01

All analytical techniques depend on the use of calibration chemicals to relate analyte concentration to an instrumental parameter. A fundamental component in the preparation of calibration solutions is the weighing of a pure chemical or metal before preparing a solution standard. The analyst must be assured that the purity, stoichiometry, and assay of the chemical are known. These terms have different meanings, and each has an important influence. This report is intended to assist the analyst in the selection and use of chemical standards for instrumental calibration. Purity, stoichiometry, and preparation of solutions for different purposes are discussed, and a critical evaluation of the best materials available for each element is presented for use in preparing solutions or calibration standards. Information on the chemical form, source, purity, drying, and appropriate precautions is given. In some cases, multiple sources or chemical forms are available. Certain radioactive elements, the transuranic elements, and the noble gases are not considered

Biobased chemicals from polyhydroxybutyrate

OpenAIRE

Spekreijse, Jurjen

2016-01-01

Currently, most chemicals and materials are obtained from fossil resources. After use, these chemicals and materials are converted to CO2. As discussed in chapter 1, this causes a build-up of CO2 in the atmosphere, the main driving force of global warming. In order to reach a sustainable system, biomass could be used as a resource for chemicals and materials instead. A biorefinery approach, where all parts of biomass are used to its full potential is essential. Taking this into consideration,...

Rapid chemical separations

CERN Document Server

Trautmann, N

1976-01-01

A survey is given on the progress of fast chemical separation procedures during the last few years. Fast, discontinuous separation techniques are illustrated by a procedure for niobium. The use of such techniques for the chemical characterization of the heaviest known elements is described. Other rapid separation methods from aqueous solutions are summarized. The application of the high speed liquid chromatography to the separation of chemically similar elements is outlined. The use of the gas jet recoil transport method for nuclear reaction products and its combination with a continuous solvent extraction technique and with a thermochromatographic separation is presented. Different separation methods in the gas phase are briefly discussed and the attachment of a thermochromatographic technique to an on-line mass separator is shown. (45 refs).

A complementarity model for the European natural gas market

International Nuclear Information System (INIS)

Egging, Ruud; Gabriel, Steven A.; Holz, Franziska; Zhuang, Jifang

2008-01-01

In this paper, we present a detailed and comprehensive complementarity model for computing market equilibrium values in the European natural gas system. Market players include producers and their marketing arms which we call 'traders', pipeline and storage operators, marketers, LNG liquefiers, regasifiers, tankers, and three end-use consumption sectors. The economic behavior of producers, traders, pipeline and storage operators, liquefiers and regasifiers is modeled via optimization problems whose Karush-Kuhn-Tucker (KKT) optimality conditions in combination with market-clearing conditions form the complementarity system. The LNG tankers, marketers and consumption sectors are modeled implicitly via appropriate cost functions, aggregate demand curves, and ex post calculations, respectively. The model is run on several case studies that highlight its capabilities, including a simulation of a disruption of Russian supplies via Ukraine

Chemical allergy in humans

DEFF Research Database (Denmark)

Kimber, Ian; Basketter, David A; Thyssen, Jacob P

2014-01-01

Abstract There is considerable interest in the immunobiological processes through which the development of allergic sensitization to chemicals is initiated and orchestrated. One of the most intriguing issues is the basis for the elicitation by chemical sensitizers of different forms of allergic...... reaction; that is, allergic contact dermatitis or sensitization of the respiratory tract associated with occupational asthma. Studies in rodents have revealed that differential forms of allergic sensitization to chemicals are, in large part at least, a function of the selective development of discrete...... functional sub-populations of CD4(+) and CD8(+) T-lymphocytes. Evidence for a similar association of chemical allergy in humans with discrete T-lymphocyte populations is, however, limited. It is of some interest, therefore, that two recent articles from different teams of investigators have shed new light...

Revisiting the definition of the electronic chemical potential, chemical hardness, and softness at finite temperatures

International Nuclear Information System (INIS)

Franco-Pérez, Marco; Gázquez, José L.; Ayers, Paul W.; Vela, Alberto

2015-01-01

We extend the definition of the electronic chemical potential (μ e ) and chemical hardness (η e ) to finite temperatures by considering a reactive chemical species as a true open system to the exchange of electrons, working exclusively within the framework of the grand canonical ensemble. As in the zero temperature derivation of these descriptors, the response of a chemical reagent to electron-transfer is determined by the response of the (average) electronic energy of the system, and not by intrinsic thermodynamic properties like the chemical potential of the electron-reservoir which is, in general, different from the electronic chemical potential, μ e . Although the dependence of the electronic energy on electron number qualitatively resembles the piecewise-continuous straight-line profile for low electronic temperatures (up to ca. 5000 K), the introduction of the temperature as a free variable smoothens this profile, so that derivatives (of all orders) of the average electronic energy with respect to the average electron number exist and can be evaluated analytically. Assuming a three-state ensemble, well-known results for the electronic chemical potential at negative (−I), positive (−A), and zero values of the fractional charge (−(I + A)/2) are recovered. Similarly, in the zero temperature limit, the chemical hardness is formally expressed as a Dirac delta function in the particle number and satisfies the well-known reciprocity relation with the global softness

Suicidal Behavior in Chemically Dependent Adolescents.

Science.gov (United States)

Cavaiola, Alan A.; Lavender, Neil

1999-01-01

Study explores distinctions between chemically dependent suicide attempters, chemically dependent nonsuicidal adolescents, and high school students with no history of chemical dependency (N=250). Results reveal that there were significant differences between the chemically dependent groups. It was also found that the majority of suicidal gestures…

Chemical Graph Transformation with Stereo-Information

DEFF Research Database (Denmark)

Andersen, Jakob Lykke; Flamm, Christoph; Merkle, Daniel

2017-01-01

Double Pushout graph transformation naturally facilitates the modelling of chemical reactions: labelled undirected graphs model molecules and direct derivations model chemical reactions. However, the most straightforward modelling approach ignores the relative placement of atoms and their neighbo......Double Pushout graph transformation naturally facilitates the modelling of chemical reactions: labelled undirected graphs model molecules and direct derivations model chemical reactions. However, the most straightforward modelling approach ignores the relative placement of atoms...... and their neighbours in space. Stereoisomers of chemical compounds thus cannot be distinguished, even though their chemical activity may differ substantially. In this contribution we propose an extended chemical graph transformation system with attributes that encode information about local geometry. The modelling...... of graph transformation, but we here propose a framework that also allows for partially specified stereoinformation. While there are several stereochemical configurations to be considered, we focus here on the tetrahedral molecular shape, and suggest general principles for how to treat all other chemically...

Chemical conversion of hemicellulose coproducts from forest biorefineries to polymers and chemicals

Energy Technology Data Exchange (ETDEWEB)

Boluk, Y.; Jost, R. [Alberta Research Council, Edmonton, AB (Canada)

2009-07-01

Raw material is the basis of the chemical industry. This presentation discussed the chemical conversion of hemicellulose coproducts from forest biorefineries to polymers and chemicals. Biorefining pretreatment processes open up the biomass structure, release hemicelluloses and overcome the resistance to enzymatic hydrolysis. Although hemicellulose is the second most abundant carbohydrate, it does not have many industrial applications. The state of released hemicellulose whether polymeric, oligomeric or monosaccharides depends primarily on the pretreatment process conditions. Physical pretreatment methods include high-pressure steaming and steam explosion; milling and grinding; extrusion; and high-energy radiation. The chemical pretreatment methods involve the use of alkali, acid, gas and oxidizing agents as well as solvents. The biological pretreatment methods involve the use of lignin consuming fungi and cellulose consuming fungi. A profitable use of C5 sugars in monomeric, oligomeric and polymeric forms is necessary for a viable wood to bioethanol process. Hemicellulose composition varies depending on the biomass source. It usually has a lower molecular weight than cellulose, contains branching, and is comprised of several different monosaccharides. The existing commercial chemical products include xylitol, mannitol, and furfural. The hemicellulose coproducts from a lignocellulosic biorefinery have the potential to become a feasible replacement for their fossil-based equivalents. tabs., figs.

Diffusion approximations to the chemical master equation only have a consistent stochastic thermodynamics at chemical equilibrium.

Science.gov (United States)

Horowitz, Jordan M

2015-07-28

The stochastic thermodynamics of a dilute, well-stirred mixture of chemically reacting species is built on the stochastic trajectories of reaction events obtained from the chemical master equation. However, when the molecular populations are large, the discrete chemical master equation can be approximated with a continuous diffusion process, like the chemical Langevin equation or low noise approximation. In this paper, we investigate to what extent these diffusion approximations inherit the stochastic thermodynamics of the chemical master equation. We find that a stochastic-thermodynamic description is only valid at a detailed-balanced, equilibrium steady state. Away from equilibrium, where there is no consistent stochastic thermodynamics, we show that one can still use the diffusive solutions to approximate the underlying thermodynamics of the chemical master equation.

A novel approach: chemical relational databases, and the role of the ISSCAN database on assessing chemical carcinogenicity.

Science.gov (United States)

Benigni, Romualdo; Bossa, Cecilia; Richard, Ann M; Yang, Chihae

2008-01-01

Mutagenicity and carcinogenicity databases are crucial resources for toxicologists and regulators involved in chemicals risk assessment. Until recently, existing public toxicity databases have been constructed primarily as "look-up-tables" of existing data, and most often did not contain chemical structures. Concepts and technologies originated from the structure-activity relationships science have provided powerful tools to create new types of databases, where the effective linkage of chemical toxicity with chemical structure can facilitate and greatly enhance data gathering and hypothesis generation, by permitting: a) exploration across both chemical and biological domains; and b) structure-searchability through the data. This paper reviews the main public databases, together with the progress in the field of chemical relational databases, and presents the ISSCAN database on experimental chemical carcinogens.

Mixture toxicity of PBT-like chemicals

DEFF Research Database (Denmark)

Syberg, Kristian; Dai, Lina; Ramskov, Tina

addition is a suitable model for default estimations of mixture effects. One of the major challenges is therefore how to select specific chemicals for actual mixture toxicity assessments. Persistant chemicals are likely to be present in the environment for an extended period of time, thus increasing...... the likelihood of them being present in environmentally found mixtures. Persistant, bioaccumulative and toxic (PBT) chemicals are therefore a highly relevant group of chemicals to consider for mixture toxicity regulation. The present study evaluates to what extent a number of PBT-like chemicals posess concern...... beyond that of the individual components. Firstly, the effects of three chemicals with PBT-like properties (acetyl cedrene, pyrene and triclosan) was examined on the freshwater snail, Potamopyrgus antipodarum. Secondly, mixture bioaccumulation of the same three chemicals were assessed experimentally...

Evaluation of haematological, hepatic and renal functions of ...

African Journals Online (AJOL)

2014-03-01

Mar 1, 2014 ... Method: Twenty-five tanker drivers' and fifteen control subjects were randomly selected based on the selection criteria ... These free radicals subsequently bond with ..... workers that are always over worked with long duration.

MT Lajpatrai blow-out studies at Bombay harbour

Digital Repository Service at National Institute of Oceanography (India)

Fondekar, S.P.

The area around the tanker MT Lajpatrai was monitored for oil pollution studies. Measurements were carried out on the concentration of petroleum hydrocarbons in water and sediment samples along with visual observations on oil slicks...

Ecological catastrophe and economical damages. The problems of assessment from Amoco-Cadiz

International Nuclear Information System (INIS)

Bonnieux, F.; Rainelli, P.

1991-01-01

This book strikes the balance of the accident of the tanker ship Amoco-Cadiz (environmental effects and economic impact) and sets the problem of damages assessment, liabilities, victims compensation. 99 refs., 41 figs., 43 tabs

Chemical peeling in ethnic/dark skin.

Science.gov (United States)

Roberts, Wendy E

2004-01-01

Chemical peeling for skin of color arose in ancient Egypt, Mesopotamia, and other ancient cultures in and around Africa. Our current fund of medical knowledge regarding chemical peeling is a result of centuries of experience and research. The list of agents for chemical peeling is extensive. In ethnic skin, our efforts are focused on superficial and medium-depth peeling agents and techniques. Indications for chemical peeling in darker skin include acne vulgaris, postinflammatory hyperpigmentation, melasma, scarring, photodamage, and pseudofolliculitis barbae. Careful selection of patients for chemical peeling should involve not only identification of Fitzpatrick skin type, but also determining ethnicity. Different ethnicities may respond unpredictably to chemical peeling regardless of skin phenotype. Familiarity with the properties each peeling agent used is critical. New techniques discussed for chemical peeling include spot peeling for postinflammatory hyperpigmentation and combination peels for acne and photodamage. Single- or combination-agent chemical peels are shown to be efficacious and safe. In conclusion, chemical peeling is a treatment of choice for numerous pigmentary and scarring disorders arising in dark skin tones. Familiarity with new peeling agents and techniques will lead to successful outcomes.

Report made on behalf of the inquiry commission for the enforcement of the measures preconized for the safety of the maritime transport of hazardous or polluting products and for the evaluation of their efficiency; Rapport fait au nom de la commission d'enquete sur l'application des mesures preconisees en matiere de securite du transport maritime des produits dangereux ou polluants et l'evaluation de leur efficacite

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

On February 5, 2003, three years after the creation of an inquiry commission about the Erika tanker-ship wreck, the principle of a new inquiry commission about the safety of maritime transports was decided by the French house of commons. Its mission is: to evaluate the efficiency of the existing measures of prevention of marine pollution by hydrocarbons, to examine if the preconized safety measures for the transport of dangerous or polluting products are effectively enforced, and to evaluate the status of the transposition of the European directives relative to the control of hazardous ships. This document is the first tome of the report made on behalf of this inquiry commission. It comprises four parts dealing with: 1 - the Prestige tanker-ship wreck and the pollution of Spanish and French coasts: similarities with the Erika wreck but differences in the conditions of crisis management, diverging accident analyses, problems encountered in Spain, a significantly improved management of the crisis by the French administration, the public opinion and the local economy, the global increase of maritime transport and the reduction of accidents frequency; 2 - the real improvements after the Erika wreck: the significant advances but their partial implementation, the acceleration of actions following the Prestige wreck; 3 - the expected and realistic perspectives: the sustain of the political will at the national scale, the concretizing of the European decisions and the follow up of the retained trends, the need for more outstanding evolutions at the international scale; 4 - the international liability and compensation regime: its limitation to the hydrocarbons pollution, the lack of victims indemnification in the case of chemical pollution, the need for an increase of the liability of all actors of the maritime transport and the improvement of the compensation system, a community compensation fund to compensate the inefficiencies of the international compensation mechanisms

Plasma-chemical processes and systems

International Nuclear Information System (INIS)

Castro B, J.

1987-01-01

The direct applications of plasma technology on chemistry and metallurgy are presented. The physical fundaments of chemically active non-equilibrium plasma, the reaction kinetics, and the physical chemical transformations occuring in the electrical discharges, which are applied in the industry, are analysed. Some plasma chemical systems and processes related to the energy of hydrogen, with the chemical technology and with the metallurgy are described. Emphasis is given to the optimization of the energy effectiveness of these processes to obtain reducers and artificial energetic carriers. (M.C.K.) [pt

Chemical substructure analysis in toxicology

Energy Technology Data Exchange (ETDEWEB)

Beauchamp, R.O. Jr. [Center for Information on Toxicology and Environment, Raleigh, NC (United States)

1990-12-31

A preliminary examination of chemical-substructure analysis (CSA) demonstrates the effective use of the Chemical Abstracts compound connectivity file in conjunction with the bibliographic file for relating chemical structures to biological activity. The importance of considering the role of metabolic intermediates under a variety of conditions is illustrated, suggesting structures that should be examined that may exhibit potential activity. This CSA technique, which utilizes existing large files accessible with online personal computers, is recommended for use as another tool in examining chemicals in drugs. 2 refs., 4 figs.

Chemical Risk Assessment Screening Tool of a Global Chemical Company

OpenAIRE

Evelyn Tjoe-Nij; Christophe Rochin; Nathalie Berne; Alessandro Sassi; Antoine Leplay

2018-01-01

Background: This paper describes a simple-to-use and reliable screening tool called Critical Task Exposure Screening (CTES), developed by a chemical company. The tool assesses if the exposure to a chemical for a task is likely to be within acceptable levels. Methods: CTES is a Microsoft Excel tool, where the inhalation risk score is calculated by relating the exposure estimate to the corresponding occupational exposure limit (OEL) or occupational exposure band (OEB). The inhalation exposure i...

Radiation Dose Measurement Using Chemical Dosimeters

International Nuclear Information System (INIS)

Lee, Min Sun; Kim, Eun Hee; Kim, Yu Ri; Han, Bum Soo

2010-01-01

The radiation dose can be estimated in various ways. Dose estimates can be obtained by either experiment or theoretical analysis. In experiments, radiation impact is assessed by measuring any change caused by energy deposition to the exposed matter, in terms of energy state (physical change), chemical production (chemical change) or biological abnormality (biological change). The chemical dosimetry is based on the implication that the energy deposited to the matter can be inferred from the consequential change in chemical production. The chemical dosimetry usually works on the sample that is an aqueous solution, a biological matter, or an organic substance. In this study, we estimated absorbed doses by quantitating chemical changes in matter caused by radiation exposure. Two different chemical dosimeters, Fricke and ECB (Ethanol-Chlorobenzene) dosimeter, were compared in several features including efficacy as dose indicator and effective dose range

Mechanical characteristics of welded joints between different stainless steels grades

Science.gov (United States)

Topolska, S.; Łabanowski, J.

2017-08-01

Investigation of mechanical characteristics of welded joints is one of the most important tasks that allow determining their functional properties. Due to the very high, still rising, cost of some stainless steels it is justified, on economic grounds, welding austenitic stainless steel with steels that are corrosion-resistant like duplex ones. According to forecasts the price of corrosion resistant steels stil can increase by 26 ÷ 30%. For technical reasons welded joints require appropriate mechanical properties such as: tensile strength, bending, ductility, toughness, and resistance to aggressive media. Such joints are applied in the construction of chemical tankers, apparatus and chemical plants and power steam stations. Using the proper binder makes possible the welds directly between the elements of austenitic stainless steels and duplex ones. It causes that such joits behave satisfactorily in service in such areas like maritime constructions and steam and chemical plants. These steels have high mechanical properties such as: the yield strength, the tensile strength and the ductility as well as the resistance to general corrosion media. They are resistant to both pitting and stress corrosions. The relatively low cost of production of duplex steels, in comparison with standard austenitic steels, is inter alia, the result of a reduced amount of scarce and expensive Nickel, which is seen as a further advantage of these steels.

Chemical equilibration of antihyperons

International Nuclear Information System (INIS)

Greiner, C.

2002-01-01

Rapid chemical equilibration of antihyperons by means of the interplay between strong annihilation on baryons and the corresponding backreactions of multi-mesonic (fusion-type) processes in the later, hadronic stage of an ultrarelativistic heavy ion collision will be discussed. Explicit rate calculations for a dynamical setup are presented. At maximum SPS energies yields of each antihyperon specie are obtained which are consistent with chemical saturated populations of T∼150-160 MeV. The proposed picture supports dynamically the popular chemical freeze-out parameters extracted within thermal models. (orig.)

Green chemistry for chemical synthesis

OpenAIRE

Li, Chao-Jun; Trost, Barry M.

2008-01-01

Green chemistry for chemical synthesis addresses our future challenges in working with chemical processes and products by inventing novel reactions that can maximize the desired products and minimize by-products, designing new synthetic schemes and apparati that can simplify operations in chemical productions, and seeking greener solvents that are inherently environmentally and ecologically benign.

Green chemistry for chemical synthesis.

Science.gov (United States)

Li, Chao-Jun; Trost, Barry M

2008-09-09

Green chemistry for chemical synthesis addresses our future challenges in working with chemical processes and products by inventing novel reactions that can maximize the desired products and minimize by-products, designing new synthetic schemes and apparati that can simplify operations in chemical productions, and seeking greener solvents that are inherently environmentally and ecologically benign.

Revisiting the definition of the electronic chemical potential, chemical hardness, and softness at finite temperatures

Energy Technology Data Exchange (ETDEWEB)

Franco-Pérez, Marco, E-mail: qimfranco@hotmail.com, E-mail: jlgm@xanum.uam.mx [Departamento de Química, Universidad Autónoma Metropolitana-Iztapalapa, Av. San Rafael Atlixco 186, México D. F. 09340 (Mexico); Department of Chemistry, McMaster University, Hamilton, Ontario L8S 4M1 (Canada); Gázquez, José L., E-mail: qimfranco@hotmail.com, E-mail: jlgm@xanum.uam.mx [Departamento de Química, Universidad Autónoma Metropolitana-Iztapalapa, Av. San Rafael Atlixco 186, México D. F. 09340 (Mexico); Ayers, Paul W. [Department of Chemistry, McMaster University, Hamilton, Ontario L8S 4M1 (Canada); Vela, Alberto [Departamento de Química, Centro de Investigación y de Estudios Avanzados (Cinvestav), Av. Instituto Politécnico Nacional 2508, México D. F. 07360 (Mexico)

2015-10-21

We extend the definition of the electronic chemical potential (μ{sub e}) and chemical hardness (η{sub e}) to finite temperatures by considering a reactive chemical species as a true open system to the exchange of electrons, working exclusively within the framework of the grand canonical ensemble. As in the zero temperature derivation of these descriptors, the response of a chemical reagent to electron-transfer is determined by the response of the (average) electronic energy of the system, and not by intrinsic thermodynamic properties like the chemical potential of the electron-reservoir which is, in general, different from the electronic chemical potential, μ{sub e}. Although the dependence of the electronic energy on electron number qualitatively resembles the piecewise-continuous straight-line profile for low electronic temperatures (up to ca. 5000 K), the introduction of the temperature as a free variable smoothens this profile, so that derivatives (of all orders) of the average electronic energy with respect to the average electron number exist and can be evaluated analytically. Assuming a three-state ensemble, well-known results for the electronic chemical potential at negative (−I), positive (−A), and zero values of the fractional charge (−(I + A)/2) are recovered. Similarly, in the zero temperature limit, the chemical hardness is formally expressed as a Dirac delta function in the particle number and satisfies the well-known reciprocity relation with the global softness.

Personal Chemical Exposure informatics

Science.gov (United States)

Chemical Exposure science is the study of human contact with chemicals (from manufacturing facilities, everyday products, waste) occurring in their environments and advances knowledge of the mechanisms and dynamics of events that cause or prevent adverse health outcomes. (adapted...

Chemical Sniffing Instrumentation for Security Applications.

Science.gov (United States)

Giannoukos, Stamatios; Brkić, Boris; Taylor, Stephen; Marshall, Alan; Verbeck, Guido F

2016-07-27

Border control for homeland security faces major challenges worldwide due to chemical threats from national and/or international terrorism as well as organized crime. A wide range of technologies and systems with threat detection and monitoring capabilities has emerged to identify the chemical footprint associated with these illegal activities. This review paper investigates artificial sniffing technologies used as chemical sensors for point-of-use chemical analysis, especially during border security applications. This article presents an overview of (a) the existing available technologies reported in the scientific literature for threat screening, (b) commercially available, portable (hand-held and stand-off) chemical detection systems, and (c) their underlying functional and operational principles. Emphasis is given to technologies that have been developed for in-field security operations, but laboratory developed techniques are also summarized as emerging technologies. The chemical analytes of interest in this review are (a) volatile organic compounds (VOCs) associated with security applications (e.g., illegal, hazardous, and terrorist events), (b) chemical "signatures" associated with human presence, and (c) threat compounds (drugs, explosives, and chemical warfare agents).

Protection Against a Ship as a Weapon

National Research Council Canada - National Science Library

Epp, Christopher D

2008-01-01

.... The purpose of this thesis is to determine systems that constitute architectures of an SoS to stop oil tanker that is hijacked with the intention of running into the oil terminal on Jurong Island, Singapore...

Encoding of Fundamental Chemical Entities of Organic Reactivity Interest using chemical ontology and XML.

Science.gov (United States)

Durairaj, Vijayasarathi; Punnaivanam, Sankar

2015-09-01

Fundamental chemical entities are identified in the context of organic reactivity and classified as appropriate concept classes namely ElectronEntity, AtomEntity, AtomGroupEntity, FunctionalGroupEntity and MolecularEntity. The entity classes and their subclasses are organized into a chemical ontology named "ChemEnt" for the purpose of assertion, restriction and modification of properties through entity relations. Individual instances of entity classes are defined and encoded as a library of chemical entities in XML. The instances of entity classes are distinguished with a unique notation and identification values in order to map them with the ontology definitions. A model GUI named Entity Table is created to view graphical representations of all the entity instances. The detection of chemical entities in chemical structures is achieved through suitable algorithms. The possibility of asserting properties to the entities at different levels and the mechanism of property flow within the hierarchical entity levels is outlined. Copyright © 2015 Elsevier Inc. All rights reserved.

Cα chemical shift tensors in helical peptides by dipolar-modulated chemical shift recoupling NMR

International Nuclear Information System (INIS)

Yao Xiaolan; Yamaguchi, Satoru; Hong Mei

2002-01-01

The Cα chemical shift tensors of proteins contain information on the backbone conformation. We have determined the magnitude and orientation of the Cα chemical shift tensors of two peptides with α-helical torsion angles: the Ala residue in G*AL (φ=-65.7 deg., ψ=-40 deg.), and the Val residue in GG*V (φ=-81.5 deg., ψ=-50.7 deg.). The magnitude of the tensors was determined from quasi-static powder patterns recoupled under magic-angle spinning, while the orientation of the tensors was extracted from Cα-Hα and Cα-N dipolar modulated powder patterns. The helical Ala Cα chemical shift tensor has a span of 36 ppm and an asymmetry parameter of 0.89. Its σ 11 axis is 116 deg. ± 5 deg. from the Cα-Hα bond while the σ 22 axis is 40 deg. ± 5 deg. from the Cα-N bond. The Val tensor has an anisotropic span of 25 ppm and an asymmetry parameter of 0.33, both much smaller than the values for β-sheet Val found recently (Yao and Hong, 2002). The Val σ 33 axis is tilted by 115 deg. ± 5 deg. from the Cα-Hα bond and 98 deg. ± 5 deg. from the Cα-N bond. These represent the first completely experimentally determined Cα chemical shift tensors of helical peptides. Using an icosahedral representation, we compared the experimental chemical shift tensors with quantum chemical calculations and found overall good agreement. These solid-state chemical shift tensors confirm the observation from cross-correlated relaxation experiments that the projection of the Cα chemical shift tensor onto the Cα-Hα bond is much smaller in α-helices than in β-sheets

Book of abstracts Chemical Engineering: IV All-Russian Conference on chemical engineering, All-Russian Youth Conference on chemical engineering, All-Russian school on chemical engineering for young scientists and specialists. Plenary reports. Engineering of inorganic substances and materials

International Nuclear Information System (INIS)

Zakhodyaeva, Yu.A.; Belova, V.V.

2012-01-01

In the given volume of abstracts of the IV All-Russian Conference on chemical engineering, All-Russian Youth Conference on chemical engineering, All-Russian school on chemical engineering for young scientists and specialists (Moscow, March 18-23, 2012) there are the abstracts of the reports concerning chemical engineering of inorganic substances and materials. The abstracts deal with state-of-the-art and future development of theoretical and experimental investigations as well as with experience in practical realization of development works in the field of chemical engineering and relative areas [ru

Sacrificial amphiphiles: Eco-friendly chemical herders as oil spill mitigation chemicals.

Science.gov (United States)

Gupta, Deeksha; Sarker, Bivas; Thadikaran, Keith; John, Vijay; Maldarelli, Charles; John, George

2015-06-01

Crude oil spills are a major threat to marine biota and the environment. When light crude oil spills on water, it forms a thin layer that is difficult to clean by any methods of oil spill response. Under these circumstances, a special type of amphiphile termed as "chemical herder" is sprayed onto the water surrounding the spilled oil. The amphiphile forms a monomolecular layer on the water surface, reducing the air-sea surface tension and causing the oil slick to retract into a thick mass that can be burnt in situ. The current best-known chemical herders are chemically stable and nonbiodegradable, and hence remain in the marine ecosystem for years. We architect an eco-friendly, sacrificial, and effective green herder derived from the plant-based small-molecule phytol, which is abundant in the marine environment, as an alternative to the current chemical herders. Phytol consists of a regularly branched chain of isoprene units that form the hydrophobe of the amphiphile; the chain is esterified to cationic groups to form the polar group. The ester linkage is proximal to an allyl bond in phytol, which facilitates the hydrolysis of the amphiphile after adsorption to the sea surface into the phytol hydrophobic tail, which along with the unhydrolyzed herder, remains on the surface to maintain herding action, and the cationic group, which dissolves into the water column. Eventual degradation of the phytol tail and dilution of the cation make these sacrificial amphiphiles eco-friendly. The herding behavior of phytol-based amphiphiles is evaluated as a function of time, temperature, and water salinity to examine their versatility under different conditions, ranging from ice-cold water to hot water. The green chemical herder retracted oil slicks by up to ~500, 700, and 2500% at 5°, 20°, and 35°C, respectively, during the first 10 min of the experiment, which is on a par with the current best chemical herders in practice.

Characterization of chemical interactions during chemical mechanical polishing (CMP) of copper

Science.gov (United States)

Lee, Seung-Mahn

2003-10-01

Chemical mechanical polishing (CMP) has received much attention as an unique technique to provide a wafer level planarization in semiconductor manufacturing. However, despite the extensive use of CMP, it still remains one of the least understood areas in semiconductor processing. The lack of the fundamental understanding is a significant barrier to further advancements in CMP technology. One critical aspect of metal CMP is the formation of a thin surface layer on the metal surface. The formation and removal of this layer controls all the aspects of the CMP process, including removal rate, surface finish, etc. In this dissertation, we focus on the characterization of the formation and removal of the thin surface layer on the copper surface. The formation dynamics was investigated using static and dynamic electrochemical techniques, including potentiodynamic scans and chronoamperometry. The results were validated using XPS measurements. The mechanical properties of the surface layer were investigated using nanoindentation measurements. The electrochemical investigation showed that the thickness of the surface layer is controlled by the chemicals such as an oxidizer (hydrogen peroxide), a corrosion inhibitor (benzotriazole), a complexing agent (citric acid), and their concentrations. The dynamic electrochemical measurements indicated that the initial layer formation kinetics is unaffected by the corrosion inhibitors. The passivation due to the corrosion inhibitor becomes important only on large time scales (>200 millisecond). The porosity and the density of the chemically modified surface layer can be affected by additives of other chemicals such as citric acid. An optimum density of the surface layer is required for high polishing rate while at the same time maintaining a high degree of surface finish. Nanoindentation measurements indicated that the mechanical properties of the surface layer are strongly dependent on the chemical additives in the slurry. The CMP

Hydraulic fracturing chemicals and fluids technology

CERN Document Server

Fink, Johannes

2013-01-01

When classifying fracturing fluids and their additives, it is important that production, operation, and completion engineers understand which chemical should be utilized in different well environments. A user's guide to the many chemicals and chemical additives used in hydraulic fracturing operations, Hydraulic Fracturing Chemicals and Fluids Technology provides an easy-to-use manual to create fluid formulations that will meet project-specific needs while protecting the environment and the life of the well. Fink creates a concise and comprehensive reference that enables the engineer to logically select and use the appropriate chemicals on any hydraulic fracturing job. The first book devoted entirely to hydraulic fracturing chemicals, Fink eliminates the guesswork so the engineer can select the best chemicals needed on the job while providing the best protection for the well, workers and environment. Pinpoints the specific compounds used in any given fracturing operation Provides a systematic approach to class...

A case of chemical pneumonia

Energy Technology Data Exchange (ETDEWEB)

Lee, Sung Woo; Eun, Choung Ki; Choi, Byung Soo; Park, Soo Sung [Chungang University School of Medicine, Seoul (Korea, Republic of)

1974-10-15

A case of chemical pneumonia due to the fumes of nitric acid and chemical compounds was encountered, and it is reported with a review of the literatures. A 19 year old Korean male working in an electric materials manufacturing factory of poor facilities dealing with chemical compounds showed initial symptoms closely similar to those of pulmonary tuberculosis of hematogenous disseminating type, and a roentgenogram was hardly helpful for differentiating chemical pneumonia from pulmonary tuberculous of hematogenous disseminating type. The clinical course in this case was very favourable as compared with those of pulmonary tuberculosis and bacterial pneumonia.

A case of chemical pneumonia

International Nuclear Information System (INIS)

Lee, Sung Woo; Eun, Choung Ki; Choi, Byung Soo; Park, Soo Sung

1974-01-01

A case of chemical pneumonia due to the fumes of nitric acid and chemical compounds was encountered, and it is reported with a review of the literatures. A 19 year old Korean male working in an electric materials manufacturing factory of poor facilities dealing with chemical compounds showed initial symptoms closely similar to those of pulmonary tuberculosis of hematogenous disseminating type, and a roentgenogram was hardly helpful for differentiating chemical pneumonia from pulmonary tuberculous of hematogenous disseminating type. The clinical course in this case was very favourable as compared with those of pulmonary tuberculosis and bacterial pneumonia

Prioritization methodology for chemical replacement

Science.gov (United States)

Cruit, Wendy; Goldberg, Ben; Schutzenhofer, Scott

1995-01-01

Since United States of America federal legislation has required ozone depleting chemicals (class 1 & 2) to be banned from production, The National Aeronautics and Space Administration (NASA) and industry have been required to find other chemicals and methods to replace these target chemicals. This project was initiated as a development of a prioritization methodology suitable for assessing and ranking existing processes for replacement 'urgency.' The methodology was produced in the form of a workbook (NASA Technical Paper 3421). The final workbook contains two tools, one for evaluation and one for prioritization. The two tools are interconnected in that they were developed from one central theme - chemical replacement due to imposed laws and regulations. This workbook provides matrices, detailed explanations of how to use them, and a detailed methodology for prioritization of replacement technology. The main objective is to provide a GUIDELINE to help direct the research for replacement technology. The approach for prioritization called for a system which would result in a numerical rating for the chemicals and processes being assessed. A Quality Function Deployment (QFD) technique was used in order to determine numerical values which would correspond to the concerns raised and their respective importance to the process. This workbook defines the approach and the application of the QFD matrix. This technique: (1) provides a standard database for technology that can be easily reviewed, and (2) provides a standard format for information when requesting resources for further research for chemical replacement technology. Originally, this workbook was to be used for Class 1 and Class 2 chemicals, but it was specifically designed to be flexible enough to be used for any chemical used in a process (if the chemical and/or process needs to be replaced). The methodology consists of comparison matrices (and the smaller comparison components) which allow replacement technology

Fate of chemical warfare agents and toxic indutrial chemicals in landfills

DEFF Research Database (Denmark)

Bartelt-Hunt, D.L.; Barlaz, M.A.; Knappe, D.R.U.

2006-01-01

One component of preparedness for a chemical attack is planning for the disposal of contaminated debris. To assess the feasibility of contaminated debris disposal in municipal solid waste (MSW) landfills, the fate of selected chemical warfare agents (CWAs) and toxic industrial chemicals (TICs......], and two TICs [furan and carbon disulfide] were studied. The effects of both infiltration (climate) and contaminant biodegradability on fate predictions were assessed. Model results showed that hydrolysis and gas-phase advection were the principal fate pathways for CWAs and TICs, respectively. Apart from...... CX and the TICs, none of the investigated compounds was predicted to persist in a landfill for more than 5 years. Climate had little impact on CWA/TIC fate, and biodegradability was only important for compounds with long hydrolysis halflives. Monte Carlo simulations were performed to assess...

Chemical burn or reaction

Science.gov (United States)

Chemicals that touch skin can lead to a reaction on the skin, throughout the body, or both. ... leave the person alone and watch carefully for reactions affecting the entire body. Note: If a chemical gets into the eyes, the eyes should be ...

Difficult Decisions: Chemical Warfare.

Science.gov (United States)

Slesnick, Irwin L.; Miller, John A.

1988-01-01

Gives the background history and chemistry of modern day chemical warfare from World War I to the present. Provides discussion questions to stimulate deeper thinking on the issue. Contains a discussion activity called "Can New Chemical Weapons Lead to Humane Warfare?" (CW)

Infrared laser-induced chemical reactions

International Nuclear Information System (INIS)

Katayama, Mikio

1978-01-01

The experimental means which clearly distinguishes between infrared ray-induced reactions and thermal reactions has been furnished for the first time when an intense monochromatic light source has been obtained by the development of infrared laser. Consequently, infrared laser-induced chemical reactions have started to develop as one field of chemical reaction researches. Researches of laser-induced chemical reactions have become new means for the researches of chemical reactions since they were highlighted as a new promising technique for isotope separation. Specifically, since the success has been reported in 235 U separation using laser in 1974, comparison of this method with conventional separation techniques from the economic point of view has been conducted, and it was estimated by some people that the laser isotope separation is cheaper. This report briefly describes on the excitation of oscillation and reaction rate, and introduces the chemical reactions induced by CW laser and TEA CO 2 laser. Dependence of reaction yield on laser power, measurement of the absorbed quantity of infrared ray and excitation mechanism are explained. Next, isomerizing reactions are reported, and finally, isotope separation is explained. It was found that infrared laser-induced chemical reactions have the selectivity for isotopes. Since it is evident that there are many examples different from thermal and photo-chemical reactions, future collection of the data is expected. (Wakatsuki, Y.)

The large dictionary on chemical engineering

International Nuclear Information System (INIS)

1995-03-01

This book mentions the large dictionary on chemical engineering. It starts the preface. It mentions introduction for publish committee. It also has signature of publish committee. It introduces explanatory notes. It gives descriptions of glossary on chemical engineering. This has appendixes and index. This book consists of seven part to explain chemical engineering glossary. It was written by chemical engineering dictionary publish committee.

Book of abstracts Chemical Engineering: IV All-Russian Conference on chemical engineering, All-Russian Youth Conference on chemical engineering, All-Russian school on chemical engineering for young scientists and specialists. Materials of All-Russian Symposium on chemistry and extraction engineering. Chemical-metallurgical processes of ore and secondary raw material processing. Analytical control of chemical industries, man-made and natural objects

International Nuclear Information System (INIS)

Zakhodyaeva, Yu.A.; Belova, V.V.

2012-01-01

In the given volume of abstracts of the IV All-Russian Conference on chemical engineering, All-Russian Youth Conference on chemical engineering, All-Russian school on chemical engineering for young scientists and specialists (Moscow, March 18-23, 2012) there are the abstracts of the reports concerning polymer and composite materials technology as well as catalysis in chemical engineering. The abstracts deal with state-of-the-art and future development of theoretical and experimental investigations as well as with experience in practical realization of development works in the field of chemical engineering and relative areas [ru

Characterization and Prediction of Chemical Functions and ...

Science.gov (United States)

Assessing exposures from the thousands of chemicals in commerce requires quantitative information on the chemical constituents of consumer products. Unfortunately, gaps in available composition data prevent assessment of exposure to chemicals in many products. Here we propose filling these gaps via consideration of chemical functional role. We obtained function information for thousands of chemicals from public sources and used a clustering algorithm to assign chemicals into 35 harmonized function categories (e.g., plasticizers, antimicrobials, solvents). We combined these functions with weight fraction data for 4115 personal care products (PCPs) to characterize the composition of 66 different product categories (e.g., shampoos). We analyzed the combined weight fraction/function dataset using machine learning techniques to develop quantitative structure property relationship (QSPR) classifier models for 22 functions and for weight fraction, based on chemical-specific descriptors (including chemical properties). We applied these classifier models to a library of 10196 data-poor chemicals. Our predictions of chemical function and composition will inform exposure-based screening of chemicals in PCPs for combination with hazard data in risk-based evaluation frameworks. As new information becomes available, this approach can be applied to other classes of products and the chemicals they contain in order to provide essential consumer product data for use in exposure-b

Alarms, Chemical

Science.gov (United States)

cited in applicable qualitative materiel requirements, small development requirements, technical characteristics, and other requirements and documentation that pertain to automatic chemical agent alarms.

Bio-based chemicals - green, but also sustainable?

DEFF Research Database (Denmark)

Ögmundarson, Ólafur; Herrgard, Markus; Förster, Jochen

For almost two decades, the chemical industry has put great effort into developing bio-chemicals,among others to fight global warming caused by greenhouse gas emissions, one of the biggest threats that are faced by our society today. To facilitate a growing and versatile bio-based chemical...... production, the US Department of Energy proposed in 2004 a list of 12 building block chemicals which can either be converged through biological or chemical conversions. Moving toward more bio-based chemicals, the chemical industry does not only claim to reduce climate change impacts, but also...... that they are increasing overall sustainability in chemical production. Whether such claims are justifiable is unclear. When sustainability of bio-based polymer production is assessed, various environmental trade-offs occur that need to be considered. It is not enough to claim that a bio-chemical is sustainable...

Source identification of a tar residue from Mumbai Beach

Digital Repository Service at National Institute of Oceanography (India)

Kadam, A; Rokade, M.A

A tar residue from Mumbai Beach, Maharashtra, India was matched with the suspected source sample from a tanker using UV, IR and GLC techniques. Negligible differences in several ratios of UV absorbances and ratios of infrared transmittances...

77 FR 27417 - Foreign-Trade Zone 220-Sioux Falls, SD; Notification of Proposed Production Activity, Rosenbauer...

Science.gov (United States)

2012-05-10

... is used for the production of emergency vehicles and firefighting equipment (pumps, tankers, rescue... drives, DC motors, static converters, rechargeable flashlights, flashlight parts, electrical foam..., LLC, (Emergency Vehicles/Firefighting Equipment), Lyons, SD The Sioux Falls Development Foundation...

At Måle Arkitektur

DEFF Research Database (Denmark)

Ventzel Riis, Nina

2013-01-01

Artiklen er en mere eller mindre personlig beretning om, hvorfor undertegnede har valgt den aktuelle uddannelse samt en beskrivelse af hvorfor dette valg er endt med en forskeruddannelse. Artiklen beskriver inspirationskilder og tanker bag de foretagede valg....

Mürgitanker Probo Koala toob oma heitvee Vaivarasse / Külli Kriis

Index Scriptorium Estoniae

Kriis, Külli, 1961-

2006-01-01

Ilmunud ka: Severnoje Poberezhje 13. okt. lk. 1. Mürgitamiskahtlusega tanker Probo Koala jõudis Sillamäe sadamasse, kus tankeri heitvesi tsisternautodesse pumbatakse ja edasi Vaivara ohtlike jäätmete käitlemise keskusesse viiakse

Reinkarnation er blot én af mange fantasier om et liv efter døden

DEFF Research Database (Denmark)

Aktor, Mikael

2015-01-01

Den tidlige kristendom udviklede sig i et miljø, hvor reinkarnationstanker ikke var ualmindelige. Kun gennem en intern teologisk forhandling i de kristne miljøer udskiltes disse tanker efterhånden som “kætterier”....

Engineering chemical interactions in microbial communities.

Science.gov (United States)

Kenny, Douglas J; Balskus, Emily P

2018-03-05

Microbes living within host-associated microbial communities (microbiotas) rely on chemical communication to interact with surrounding organisms. These interactions serve many purposes, from supplying the multicellular host with nutrients to antagonizing invading pathogens, and breakdown of chemical signaling has potentially negative consequences for both the host and microbiota. Efforts to engineer microbes to take part in chemical interactions represent a promising strategy for modulating chemical signaling within these complex communities. In this review, we discuss prominent examples of chemical interactions found within host-associated microbial communities, with an emphasis on the plant-root microbiota and the intestinal microbiota of animals. We then highlight how an understanding of such interactions has guided efforts to engineer microbes to participate in chemical signaling in these habitats. We discuss engineering efforts in the context of chemical interactions that enable host colonization, promote host health, and exclude pathogens. Finally, we describe prominent challenges facing this field and propose new directions for future engineering efforts.

Chemical Reactivity Test (CRT)

Energy Technology Data Exchange (ETDEWEB)

Zaka, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-12-13

The Chemical Reactivity Test (CRT) is used to determine the thermal stability of High Explosives (HEs) and chemical compatibility between (HEs) and alien materials. The CRT is one of the small-scale safety tests performed on HE at the High Explosives Applications Facility (HEAF).

Chemical ecology of fungi.

Science.gov (United States)

Spiteller, Peter

2015-07-01

Fungi are widespread in nature and have conquered nearly every ecological niche. Fungi occur not only in terrestrial but also in freshwater and marine environments. Moreover, fungi are known as a rich source of secondary metabolites. Despite these facts, the ecological role of many of these metabolites is still unknown and the chemical ecology of fungi has not been investigated systematically so far. This review intends to present examples of the various chemical interactions of fungi with other fungi, plants, bacteria and animals and to give an overview of the current knowledge of fungal chemical ecology.

chemical adjustment chemical adjustment of effluent from cassava

African Journals Online (AJOL)

eobe

Higher degradation and odour removal was achieved faster with. ). Higher ... form of food biotechnology, in which wastewater can ... University of Nigeria, Nsukka, ISSN: 0331-8443 .... Effect of Chemical Treatment ..... Fundacaocarg ill.

Hazardous chemical tracking system (HAZ-TRAC)

International Nuclear Information System (INIS)

Bramlette, J.D.; Ewart, S.M.; Jones, C.E.

1990-07-01

Westinghouse Idaho Nuclear Company, Inc. (WINCO) developed and implemented a computerized hazardous chemical tracking system, referred to as Haz-Trac, for use at the Idaho Chemical Processing Plant (ICPP). Haz-Trac is designed to provide a means to improve the accuracy and reliability of chemical information, which enhances the overall quality and safety of ICPP operations. The system tracks all chemicals and chemical components from the time they enter the ICPP until the chemical changes form, is used, or becomes a waste. The system runs on a Hewlett-Packard (HP) 3000 Series 70 computer. The system is written in COBOL and uses VIEW/3000, TurboIMAGE/DBMS 3000, OMNIDEX, and SPEEDWARE. The HP 3000 may be accessed throughout the ICPP, and from remote locations, using data communication lines. Haz-Trac went into production in October, 1989. Currently, over 1910 chemicals and chemical components are tracked on the system. More than 2500 personnel hours were saved during the first six months of operation. Cost savings have been realized by reducing the time needed to collect and compile reporting information, identifying and disposing of unneeded chemicals, and eliminating duplicate inventories. Haz-Trac maintains information required by the Superfund Amendment Reauthorization Act (SARA), the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) and the Occupational Safety and Health Administration (OSHA)

Board on chemical sciences and technology

International Nuclear Information System (INIS)

1991-01-01

The Board on Chemical Sciences and Technology organizes and provides direction for standing and ad-hoc committees charged with addressing specific issues relevant to the continued health of the chemical sciences and technology community. Studies currently under the oversight of the BCST include a major survey of the chemical sciences, a complementary survey of chemical engineering, an examination of the problems of biohazards in the laboratory, and an analysis of the roots and magnitude of the problem of obsolescent facilities for research and teaching in departments in the chemical sciences and engineering. The Board continues to respond to specific agency requests for program assessments and advice. BCST members are designated to serve as liaison with major federal agencies or departments that support research in order to help identify ways for the Board to assist these organizations. The BCST maintains close contact with professional societies and non-governmental organizations that share the Board's concern for the health of chemical sciences and technology. Individual Board members are assigned responsibility for liaison with the American Chemical Society, the American Institute of Chemical Engineers, the American Society of Biological Chemists, the Council for Chemical Research, the NAS Chemistry and Biochemistry Sections, and the National Academy of Engineering. In the past few years, the Board has served as a focus and a forum for a variety of issues that relate specifically to the health of chemistry

Hazardous chemical tracking system (HAZ-TRAC)

Energy Technology Data Exchange (ETDEWEB)

Bramlette, J D; Ewart, S M; Jones, C E

1990-07-01

Westinghouse Idaho Nuclear Company, Inc. (WINCO) developed and implemented a computerized hazardous chemical tracking system, referred to as Haz-Trac, for use at the Idaho Chemical Processing Plant (ICPP). Haz-Trac is designed to provide a means to improve the accuracy and reliability of chemical information, which enhances the overall quality and safety of ICPP operations. The system tracks all chemicals and chemical components from the time they enter the ICPP until the chemical changes form, is used, or becomes a waste. The system runs on a Hewlett-Packard (HP) 3000 Series 70 computer. The system is written in COBOL and uses VIEW/3000, TurboIMAGE/DBMS 3000, OMNIDEX, and SPEEDWARE. The HP 3000 may be accessed throughout the ICPP, and from remote locations, using data communication lines. Haz-Trac went into production in October, 1989. Currently, over 1910 chemicals and chemical components are tracked on the system. More than 2500 personnel hours were saved during the first six months of operation. Cost savings have been realized by reducing the time needed to collect and compile reporting information, identifying and disposing of unneeded chemicals, and eliminating duplicate inventories. Haz-Trac maintains information required by the Superfund Amendment Reauthorization Act (SARA), the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) and the Occupational Safety and Health Administration (OSHA).

Argonne Chemical Sciences & Engineering - Awards Home

Science.gov (United States)

Argonne National Laboratory Chemical Sciences & Engineering DOE Logo CSE Home About CSE Argonne Home > Chemical Sciences & Engineering > Fundamental Interactions Catalysis & Energy Computational Postdoctoral Fellowships Contact Us CSE Intranet Awards Argonne's Chemical Sciences and

Volatile chemical interaction between undamaged plants

OpenAIRE

Glinwood, Robert

2010-01-01

This chapter discusses whether plant chemical communication is a mechanism by which plant genetic diversity can affect the natural enemies of herbivores. Plant genetic diversity influences natural enemies, and these insects use volatile chemical cues to locate suitable habitats. However, the importance of chemical communication for these interactions has not been considered. In this chapter, the latest research on chemical communication between undamaged plants is reviewed. ...

How to control chemical hazards

CERN Multimedia

2012-01-01

Improving protection against chemical hazards is one of the 2012 CERN safety objectives identified by the Director General. Identifying and drawing up a complete inventory of chemicals, and assessing the associated risks are important steps in this direction.   The HSE Unit has drawn up safety rules, guidelines and forms to help you to meet this objective. We would like to draw your attention to: • safety guidelines C-0-0-1 and C-1-0-2 (now also available in French), which deal with the identification of hazardous chemicals and the assessment of chemical risk; • safety guideline C-1-0-1, which deals with the storage of hazardous chemicals. All safety documents can be consulted at: cern.ch/regles-securite The HSE Unit will be happy to answer any questions you may have. Write to us at: safety-general@cern.ch The HSE Unit

Progress Report for the Chemical and Energy Research Section of the Chemical Technology Division: July-December 1998

Energy Technology Data Exchange (ETDEWEB)

Jubin, R.T.

1999-06-01

This report summarizes the major activities conducted in the Chemical and Energy Research Section of the Chemical Technology Division at Oak Ridge National Laboratory (ORNL) during the period July-December 1998. The section conducts basic and applied research and development in chemical engineering, applied chemistry, and bioprocessing, with an emphasis on energy-driven technologies and advanced chemical separations for nuclear and waste applications.

Interactive design of generic chemical patterns.

Science.gov (United States)

Schomburg, Karen T; Wetzer, Lars; Rarey, Matthias

2013-07-01

Every medicinal chemist has to create chemical patterns occasionally for querying databases, applying filters or describing functional groups. However, the representations of chemical patterns have been so far limited to languages with highly complex syntax, handicapping the application of patterns. Graphic pattern editors similar to chemical editors can facilitate the work with patterns. In this article, we review the interfaces of frequently used web search engines for chemical patterns. We take a look at pattern editing concepts of standalone chemical editors and finally present a completely new, unpublished graphical approach to pattern design, the SMARTSeditor. Copyright © 2013 Elsevier Ltd. All rights reserved.

Studies in Chemical Dynamics

International Nuclear Information System (INIS)

Rabitz, Herschel; Ho, Tak-San

2003-01-01

This final report draws together the research carried from February, 1986 through January, 2003 concerning a series of topics in chemical dynamics. The specific areas of study include molecular collisions, chemical kinetics, data inversion to extract potential energy surfaces, and model reduction of complex kinetic systems

Chemical Engineering in the "BIO" world

DEFF Research Database (Denmark)

Chiarappa, Gianluca; Grassi, Mario; Abrami, Michela

2017-01-01

Modern Chemical Engineering was born around the end of the 19th century in Great Britain, Germany, and the USA, the most industrialized countries at that time. Milton C. Whitaker, in 1914, affirmed that the difference between Chemistry and Chemical Engineering lies in the capability of chemical...... engineers to transfer laboratory findings to the industrial level. Since then, Chemical Engineering underwent huge transformations determining the detachment from the original Chemistry nest. The beginning of the sixties of the 20th century saw the development of a new branch of Chemical Engineering...... baptized Biomedical Engineering by Peppas and Langer and that now we can name Biological Engineering. Interestingly, although Biological Engineering focused on completely different topics from Chemical Engineering ones, it resorted to the same theoretical tools such as, for instance, mass, energy...

Cost-effectiveness criteria for marine oil spill preventive measures

International Nuclear Information System (INIS)

Vanem, Erik; Endresen, Oyvind; Skjong, Rolf

2008-01-01

Oil tanker accidents resulting in large quantities of oil spills and severe pollution have occurred in the past, leading to major public attention and an international focus on finding solutions for minimising the risks related to such events. This paper proposes a novel approach for evaluating measures for prevention and control of marine oil spills, based on considerations of oil spill risk and cost effectiveness. A cost model that incorporates all costs of a shipping accident has been established and oil tanker spill accidents have been further elaborated as a special case of such accidents. Utilising this model, novel implementation criteria, in terms of the Cost of Averting a Tonne of oil Spilt (CATS), for risk control options aiming at mitigating the environmental risk of accidental oil spills, are proposed. The paper presents a review of previous studies on the costs associated with oil spills from shipping, which is a function of many factors such as location of spill, spill amount, type of oil, etc. However, ships are designed for global trade, transporting different oil qualities. Therefore, globally applicable criteria must average over most of these factors, and the spill amount is the remaining factor that will be used to measure cost effectiveness against. A weighted, global average cleanup cost of USD 16,000/tonne of oil spilt has been calculated, considering the distribution of oil tanker traffic densities. Finally, the criteria are compared with some existing regulations for oil spill prevention, response and compensation (OPA 90)

Spatial Pattern and Regional Relevance Analysis of the Maritime Silk Road Shipping Network

Directory of Open Access Journals (Sweden)

Naixia Mou

2018-03-01

Full Text Available Under the strategy of “One Belt and One Road”, this paper explores the spatial pattern and the status quo of regional trade relevance of the Maritime Silk Road shipping network. Based on complex network theory, a topological structure map of shipping networks for containers, tankers, and bulk carriers was constructed, and the spatial characteristics of shipping networks were analyzed. Using the mode of spatial arrangement and the Herfindahl–Hirschman Index, this paper further analyzes the traffic flow pattern of regional trade of three kinds of goods. It is shown that the shipping network of containers, tankers and bulk carriers are unevenly distributed and have regional agglomeration phenomena. There is a strong correlation between the interior of the region and the adjacent areas, and the port competition is fierce. Among them, the container ships network is the most competitive in the region, while the competitiveness of the tankers network is relatively the lowest. The inter-regional correlation is weak, and a few transit hub ports have obvious competitive advantages. The ports in Northeast Asia and Southeast Asia are the most significant. The research results combined with the Maritime Silk Road policy can provide reference for port construction, route optimization, and coordinated development of regional trade, which will help to save time and cost of marine transportation, reduce energy consumption, and promote the sustainable development of marine environment and regional trade on the Maritime Silk Road.

78 FR 55326 - Determinations Regarding Use of Chemical Weapons in Syria Under the Chemical and Biological...

Science.gov (United States)

2013-09-10

... DEPARTMENT OF STATE [Public Notice 8460] Determinations Regarding Use of Chemical Weapons in Syria Under the Chemical and Biological Weapons Control and Warfare Elimination Act of 1991 AGENCY: Bureau of... Government has determined on August 2, pursuant to Section 306(a) of the Chemical and Biological Weapons...

DEFINING THE CHEMICAL SPACE OF PUBLIC GENOMIC ...

Science.gov (United States)

The current project aims to chemically index the genomics content of public genomic databases to make these data accessible in relation to other publicly available, chemically-indexed toxicological information. By defining the chemical space of public genomic data, it is possible to identify classes of chemicals on which to develop methodologies for the integration of chemogenomic data into predictive toxicology. The chemical space of public genomic data will be presented as well as the methodologies and tools developed to identify this chemical space.

Chemical Equilibrium And Transport (CET)

Science.gov (United States)

Mcbride, B. J.

1991-01-01

Powerful, machine-independent program calculates theoretical thermodynamic properties of chemical systems. Aids in design of compressors, turbines, engines, heat exchangers, and chemical processing equipment.

LOOP marine and estuarine monitoring program, 1978-95 : volume 4 : zooplankton and ichthyoplankton.

Science.gov (United States)

1998-01-01

The Louisiana Offshore Oil Port (LOOP) facilities in coastal Louisiana provide the United States with the country's only Superport for off-loading deep draft tankers. The three single-point mooring (SPM) structures connected by pipelines to a platfor...

@iMaersk navigator@@ oil spill in the great channel (Andaman Sea) in January 1993 and its environmental impact

Digital Repository Service at National Institute of Oceanography (India)

SenGupta, R.; Fondekar, S.P.; Shailaja, M.S.; Sankaranarayanan, V.N.

Observations on oil slicks, tar residues and dissolved petroleum hydrocarbons (DPH) shortly after the oil spill resulting from the tanker accident in January 1993 showed negligible impact on the Indian EEZ of the Great Channel (Andaman Sea). DPH...

Maersk navigator oil spill in the great channel (Andaman Sea) in January 1993 and its environmental impact

Digital Repository Service at National Institute of Oceanography (India)

SenGupta, R.; Fondekar, S.P.; Shailaja, M.S.; Sankaranarayanan, V.N.

Observations on oil slicks, tar residues and dissolved petroleum hydrocarbons (DPH) shortly after the oil spill resulting from the tanker accident in January 1993 showed negligible impact on the Indian EEZ of the Great Channel (Andaman Sea). DPH...

Chemical Engineering Education - Current and Future Trends

DEFF Research Database (Denmark)

Gani, Rafiqul

topics (transport phenomena, separations, reaction engineering, etc.) must remain strong, should the applications that currently emphasize commodity chemicals also include new topics such as sustainability, and product design? In Europe, the European Federation of Chemical Engineering (EFCE) has taken...... has a product focus. With this shift of the chemical industry, what should be the curriculum of the chemical engineering degrees at the BSc- and MSc-levels, and, are the skill set of chemical engineers appropriate for this altered chemical industry? While the basic skill set, defined by the core...... a leading role to define the chemical engineering curriculum. The result has been a set of recommendations for the first (BSc), second (MSc) and third (PhD) cycle chemical engineering education aligned to the Bologna Process. They recommend that students studying towards bachelor and masters qualifications...

Global chemical pollution

International Nuclear Information System (INIS)

Travis, C.C.; Hester, S.T.

1991-01-01

Over the past decade, public and governmental awareness of environmental problems has grown steadily, with an accompanying increase in the regulation of point sources of pollution. As a result, great strides have been made in cleaning polluted rivers and decreasing air pollution near factories. However, traditional regulatory approaches to environmental pollution have focused primarily on protecting the maximally exposed individual located in the immediate vicinity of the pollution source. Little attention has been given to the global implications of human production and use of synthetic chemicals. A consensus is emerging that even trace levels of environmental contamination can have potentially devastating environmental consequences. The authors maintain that ambient levels of pollution have risen to the point where human health is being affected on a global scale. Atmospheric transport is recognized as the primary mode of global distribution and entry into the food chain for organic chemicals. The following are examples of global chemical pollutants that result in human exposure of significant proportions: PCBs, dioxins, benzene, mercury and lead. Current regulatory approaches for environmental pollution do not incorporate ways of dealing with global pollution. Instead the major focus has been on protecting the maximally exposed individual. If we do not want to change our standard of living, the only way to reduce global chemical pollution is to make production and consumption processes more efficient and to lower the levels of production of these toxic chemicals. Thus the only reasonable solution to global pollution is not increased regulation of isolated point sources, but rather an increased emphasis on waste reduction and materials recycling. Until we focus on these issues, we will continue to experience background cancer risk in the 10 -3 range

Current Chemical Risk Management Activities

Science.gov (United States)

EPA's existing chemicals programs address pollution prevention, risk assessment, hazard and exposure assessment and/or characterization, and risk management for chemicals substances in commercial use.

Radiological equivalent of chemical pollutants

International Nuclear Information System (INIS)

Medina, V.O.

1982-01-01

The development of the peaceful uses of nuclear energy has caused continued effort toward public safety through radiation health protection measures and nuclear management practices. However, concern has not been focused on the development specifically in the operation of chemical pestrochemical industries as well as other industrial processes brought about by technological advancements. This article presents the comparison of the risk of radiation and chemicals. The methods used for comparing the risks of late effects of radiation and chemicals are considered at three levels. (a) as a frame of reference to give an impression of resolving power of biological tests; (b) as methods to quantify risks; (c) as instruments for an epidemiological survey of human populations. There are marked dissimilarities between chemicals and radiation and efforts to interpret chemical activity may not be achieved. Applicability of the concept of rad equivalence has many restrictions and as pointed out this approach is not an established one. (RTD)

Chemical-text hybrid search engines.

Science.gov (United States)

Zhou, Yingyao; Zhou, Bin; Jiang, Shumei; King, Frederick J

2010-01-01

As the amount of chemical literature increases, it is critical that researchers be enabled to accurately locate documents related to a particular aspect of a given compound. Existing solutions, based on text and chemical search engines alone, suffer from the inclusion of "false negative" and "false positive" results, and cannot accommodate diverse repertoire of formats currently available for chemical documents. To address these concerns, we developed an approach called Entity-Canonical Keyword Indexing (ECKI), which converts a chemical entity embedded in a data source into its canonical keyword representation prior to being indexed by text search engines. We implemented ECKI using Microsoft Office SharePoint Server Search, and the resultant hybrid search engine not only supported complex mixed chemical and keyword queries but also was applied to both intranet and Internet environments. We envision that the adoption of ECKI will empower researchers to pose more complex search questions that were not readily attainable previously and to obtain answers at much improved speed and accuracy.

Chemical influences of the environment

Energy Technology Data Exchange (ETDEWEB)

Carr, D J

1961-01-01

It is possible to consider the chemical effects of the environment in various ways. A distinction can be made, for instance, between chemical and physicochemical effects. The latter would include such phenomena as osmotic pressure, pH, adsorption phenomena and redox potentials. Of these, pH is so universally involved in physiological experiments as to render any treatment of its effects almost superfluous. The measurement and interpretation of redox potentials is so fraught with difficulties that they are of real value only with systems which can be simplified to a few chemical components. In this study of the effects of chemicals on plant growth and development, only such chemicals as occur in natural environments where plants grow will be considered. The effects of synthetic hormones or of fertilizers will, therefore, be neglected, but some attention must be given to certain gases which, as pollutants, must be considered as part of the atmosphere of any industrialized country. They are O/sub 3/, CO, and ethylene.

Predicting degradability of organic chemicals

Energy Technology Data Exchange (ETDEWEB)

Finizio, A; Vighi, M [Milan Univ. (Italy). Ist. di Entomologia Agraria

1992-05-01

Degradability, particularly biodegradability, is one of the most important factors governing the persistence of pollutants in the environment and consequently influencing their behavior and toxicity in aquatic and terrestrial ecosystems. The need for reliable persistence data in order to assess the environmental fate and hazard of chemicals by means of predictive approaches, is evident. Biodegradability tests are requested by the EEC directive on new chemicals. Neverthless, degradation tests are not easy to carry out and data on existing chemicals are very scarce. Therefore, assessing the fate of chemicals in the environment from the simple study of their structure would be a useful tool. Rates of degradation are a function of the rates of a series of processes. Correlation between degradation rates and structural parameters are will be facilitated if one of the processes is rate determining. This review is a survey of studies dealing with relationships between structure and biodegradation of organic chemicals, to identify the value and limitations of this approach.

Reliability Based Ship Structural Design

DEFF Research Database (Denmark)

Dogliani, M.; Østergaard, C.; Parmentier, G.

1996-01-01

This paper deals with the development of different methods that allow the reliability-based design of ship structures to be transferred from the area of research to the systematic application in current design. It summarises the achievements of a three-year collaborative research project dealing...... with developments of models of load effects and of structural collapse adopted in reliability formulations which aim at calibrating partial safety factors for ship structural design. New probabilistic models of still-water load effects are developed both for tankers and for containerships. New results are presented...... structure of several tankers and containerships. The results of the reliability analysis were the basis for the definition of a target safety level which was used to asses the partial safety factors suitable for in a new design rules format to be adopted in modern ship structural design. Finally...

The complex factor of ecological risk and its application for planning the marine transport of crude oil

International Nuclear Information System (INIS)

Goncharov, V.K.

2004-01-01

Computer-controlled methods for scheduling the routes of ships, port calls, and cargo handling are now commonly used for the marine freight transport. This presentation proposed a method for preventing accidents for tanker fleets. The risk of accidental oil spills increases with weather deterioration, particularly in polar waters. It is therefore necessary to correlate the risk of the fixed costs with compensation for environmental damages and repair to facilities. The profits lost while waiting for favourable weather conditions are also considered. The proposed 'complex factor of ecological risk' is intended to improve ecological safety and economic efficiencies of transporting oil by sea in areas with difficult weather conditions. It requires computer simulation which is based on volumes of statistical data of weather in marine areas, emergency incidents with tankers near terminals and the economic aspects of crude oil transportation

Chemical and natural stressors combined:

DEFF Research Database (Denmark)

Gergs, André; Zenker, Armin; Grimm, Volker

2013-01-01

In addition to natural stressors, populations are increasingly exposed to chemical pollutants released into the environment. We experimentally demonstrate the loss of resilience for Daphnia magna populations that are exposed to a combination of natural and chemical stressors even though effects...... demonstrates that population size can be a poor endpoint for risk assessments of chemicals and that ignoring disturbance interactions can lead to severe underestimation of extinction risk...

Special theory on chemical engineering

International Nuclear Information System (INIS)

1987-06-01

This book give a special description about chemical engineering. The contents of this book are special technique for isolation on introduction and separation by membrane, biochemistry engineering, process system engineering, energy engineering, environment engineering, a high molecular new material, election material and research on surface property of catalyst. It has appendixes on history of transition on Korean chemical engineering text contents and history of the activity of Korea chemical engineering institute.

Introduction to chemical reaction engineering

International Nuclear Information System (INIS)

Kim, Yeong Geol

1990-10-01

This deals with chemical reaction engineering with thirteen chapters. The contents of this book are introduction on reaction engineering, chemical kinetics, thermodynamics and chemical reaction, abnormal reactor, non-isothermal reactor, nonideal reactor, catalysis in nonuniform system, diffusion and reaction in porosity catalyst, design catalyst heterogeneous reactor in solid bed, a high molecule polymerization, bio reaction engineering, reaction engineering in material process, control multi-variable reactor process using digital computer.

Chemical Sensors Based on Cyclodextrin Derivatives.

Science.gov (United States)

Ogoshi, Tomoki; Harada, Akira

2008-08-25

This review focuses on chemical sensors based on cyclodextrin (CD) derivatives. This has been a field of classical interest, and is now of current interest for numerous scientists. First, typical chemical sensors using chromophore appended CDs are mentioned. Various "turn-off" and "turn-on" fluorescent chemical sensors, in which fluorescence intensity was decreased or increased by complexation with guest molecules, respectively, were synthesized. Dye modified CDs and photoactive metal ion-ligand complex appended CDs, metallocyclodextrins, were also applied for chemical sensors. Furthermore, recent novel approaches to chemical sensing systems using supramolecular structures such as CD dimers, trimers and cooperative binding systems of CDs with the other macrocycle [2]rotaxane and supramolecular polymers consisting of CD units are mentioned. New chemical sensors using hybrids of CDs with p-conjugated polymers, peptides, DNA, nanocarbons and nanoparticles are also described in this review.

Chemical Thermodynamics Vol. 12 - Chemical Thermodynamics of tin

International Nuclear Information System (INIS)

Gamsjaeger, Heinz; GAJDA, Tamas; Sangster, James; Saxena, Surendra K.; Voigt, Wolfgang; Perrone, Jane

2012-01-01

This is the 12th volume of a series of expert reviews of the chemical thermodynamics of key chemical elements in nuclear technology and waste management. This volume is devoted to the inorganic species and compounds of tin. The tables contained in Chapters III and IV list the currently selected thermodynamic values within the NEA TDB Project. The database system developed at the NEA Data Bank, see Section II.6, assures consistency among all the selected and auxiliary data sets. The recommended thermodynamic data are the result of a critical assessment of published information. The values in the auxiliary data set, see Tables IV-1 and IV-2, have been adopted from CODATA key values or have been critically reviewed in this or earlier volumes of the series

Chemical oceanography

National Research Council Canada - National Science Library

Millero, F.J

1996-01-01

Chemical Oceanography presents a comprehensive examination of the chemistry of oceans through discussions of such topics as descriptive physical oceanography, the composition of seawater and the major...

Culturing Security System of Chemical Laboratory in Indonesia

Directory of Open Access Journals (Sweden)

Eka Dian Pusfitasari

2017-04-01

Full Text Available Indonesia has experiences on the lack of chemical security such as: a number of bombing terrors and hazardous chemicals found in food. Bomb used in terror is a homemade bomb made from chemicals which are widely spread in the research laboratories such as a mixture of pottasium chlorate, sulphur, and alumunium. Therefore, security of chemicals should be implemented to avoid the misused of the chemicals. Although it has experienced many cases of the misuse of chemicals, and many regulations and seminars related to chemical security have been held, but the implementation of chemical security is still a new thing for Indonesian citizens. The evident is coming from the interviews conducted in this study. Questions asked in this interview/survey included: the implementation of chemical safety and chemical security in laboratory; chemical inventory system and its regulation; and training needed for chemical security implementation. Respondents were basically a researcher from Government Research Institutes, University laboratories, senior high school laboratories, and service laboratories were still ambiguous in distinguishing chemical safety and chemical security. Because of this condition, most Indonesia chemical laboratories did not totally apply chemical security system. Education is very important step to raise people awareness and address this problem. Law and regulations should be sustained by all laboratory personnel activities to avoid chemical diversion to be used for harming people and environment. The Indonesia Government could also develop practical guidelines and standards to be applied to all chemical laboratories in Indonesia. These acts can help Government’s efforts to promote chemical security best practices which usually conducted by doing seminars and workshop.

Chemical Soups Around Cool Stars

Science.gov (United States)

2009-01-01

This artist's conception shows a young, hypothetical planet around a cool star. A soupy mix of potentially life-forming chemicals can be seen pooling around the base of the jagged rocks. Observations from NASA's Spitzer Space Telescope hint that planets around cool stars the so-called M-dwarfs and brown dwarfs that are widespread throughout our galaxy might possess a different mix of life-forming, or prebiotic, chemicals than our young Earth. Life on our planet is thought to have arisen out of a pond-scum-like mix of chemicals. Some of these chemicals are thought to have come from a planet-forming disk of gas and dust that swirled around our young sun. Meteorites carrying the chemicals might have crash-landed on Earth. Astronomers don't know if these same life-generating processes are taking place around stars that are cooler than our sun, but the Spitzer observations show their disk chemistry is different. Spitzer detected a prebiotic molecule, called hydrogen cyanide, in the disks around yellow stars like our sun, but found none around cooler, less massive, reddish stars. Hydrogen cyanide is a carbon-containing, or organic compound. Five hydrogen cyanide molecules can join up to make adenine a chemical element of the DNA molecule found in all living organisms on Earth.

Nuclear chemical engineering

International Nuclear Information System (INIS)

Lee, Geon Jae; Shin, Young Jun

1989-08-01

The contents of this book are introduction of chemical engineering and related chemistry on an atomic reactor, foundation of the chemistry nuclear chemical engineering, theory on nuclear engineering, the cycle of uranium and nuclear fuel, a product of nuclear division, nuclear reprocessing, management of spent fuel separation of radioisotope, materials of an atomic reactor, technology and chemistry related water in atomic reactors and utilization of radioisotope and radiation. This book has the exercises and reference books for the each chapter.

Investigations on oil patches around 'M.T.Lajpatrai' Bombay harbour

Digital Repository Service at National Institute of Oceanography (India)

Kadam, A.N.; Zingde, M.D.

Samples from three oil patches observed around the burning tanker 'M. T. Lajpatrai' at Bombay Harbour were characterised using proton magnetic resonance spectroscopy (PMR). Two of them were found to be from used lubricating oils. As indicated by gas...

Materials of 44. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

International Nuclear Information System (INIS)

2001-01-01

Scientific assemblies of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry are the most important chemical meeting organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects was proposed as scientific sessions and symposia topics: solid state chemistry; didactics of chemistry; electrochemistry; biologically active compounds; geochemistry; organic chemistry; physical chemistry; environment quality and protection; coordination chemistry; chemical technology; polymers; explosive materials; analytical chemistry; theoretical chemistry

High-throughput dietary exposure predictions for chemical migrants from food contact substances for use in chemical prioritization.

Science.gov (United States)

Biryol, Derya; Nicolas, Chantel I; Wambaugh, John; Phillips, Katherine; Isaacs, Kristin

2017-11-01

Under the ExpoCast program, United States Environmental Protection Agency (EPA) researchers have developed a high-throughput (HT) framework for estimating aggregate exposures to chemicals from multiple pathways to support rapid prioritization of chemicals. Here, we present methods to estimate HT exposures to chemicals migrating into food from food contact substances (FCS). These methods consisted of combining an empirical model of chemical migration with estimates of daily population food intakes derived from food diaries from the National Health and Nutrition Examination Survey (NHANES). A linear regression model for migration at equilibrium was developed by fitting available migration measurements as a function of temperature, food type (i.e., fatty, aqueous, acidic, alcoholic), initial chemical concentration in the FCS (C 0 ) and chemical properties. The most predictive variables in the resulting model were C 0 , molecular weight, log K ow , and food type (R 2 =0.71, pchemicals identified via publicly-available data sources as being present in polymer FCSs were predicted for 12 food groups (combinations of 3 storage temperatures and food type). The model was parameterized with screening-level estimates of C 0 based on the functional role of chemicals in FCS. By combining these concentrations with daily intakes for food groups derived from NHANES, population ingestion exposures of chemical in mg/kg-bodyweight/day (mg/kg-BW/day) were estimated. Calibrated aggregate exposures were estimated for 1931 chemicals by fitting HT FCS and consumer product exposures to exposures inferred from NHANES biomonitoring (R 2 =0.61, pchemicals), they can provide critical refinement to aggregate exposure predictions used in risk-based chemical priority-setting. Published by Elsevier Ltd.

Biobased chemicals from polyhydroxybutyrate

NARCIS (Netherlands)

Spekreijse, Jurjen

2016-01-01

Currently, most chemicals and materials are obtained from fossil resources. After use, these chemicals and materials are converted to CO2. As discussed in chapter 1, this causes a build-up of CO2 in the atmosphere, the main driving force of global warming. In order to reach a

Wearable bio and chemical sensors

OpenAIRE

Coyle, Shirley; Curto, Vincenzo F.; Benito-Lopez, Fernando; Florea, Larisa; Diamond, Dermot

2014-01-01

Chemical and biochemical sensors have experienced tremendous growth in the past decade due to advances in material chemistry combined with the emergence of digital communication technologies and wireless sensor networks (WSNs) [1]. The emergence of wearable chemical and biochemical sensors is a relatively new concept that poses unique challenges to the field of wearable sensing. This is because chemical sensors have a more complex mode of operation, compared to physical transducers, in that t...

Chemical effects of nuclear transformations

Energy Technology Data Exchange (ETDEWEB)

Bulbulian, S

1982-06-01

A brief survey of the present state of knowledge on the chemical effects of nuclear transformations is presented. The recoil energy produced by these transformations in the nuclide is often sufficiently high to disrupt the chemical ligands between these particular atoms affected by the nuclear transformations, while the rest of their molecules. It also contains a discussion of the different annealing processes that produce the cancellation of the chemical change produced by the nuclear transformation.

Comparison of radiation and chemical risks

International Nuclear Information System (INIS)

Bengtsson, G.

1988-01-01

Injury to living cells is caused by mechanisms which in many cases are similar for radiation and chemicals. It is thus not surprising that radiation and many chemicals can cause similar biological effects, e.g. cancer, fetal injury and hereditary disease. Both radiation and chemicals are always found in our environment. One agent may strengthen or weaken the effect of another, be it radiation in combination with chemicals or one chemical with another. The implications of such synergistic or antagonistic effects are discussed. Intricate mechanisms help the body to defend itself against threats to health from radiation and chemicals, even against cancer risks. In a strategy for health, it might be worth to exploit actively these defense mechanisms, in parallel with decreasing the exposures. On particular interest are the large exposures from commonly known sources such as smoking, sun tanning and high fat contents of food. (author)

A theory of chemicals regulation and testing

NARCIS (Netherlands)

Gabbert, S.G.M.; Weikard, H.P.

2010-01-01

Risk management of chemicals requires information about their adverse effects such as toxicity and persistence, for example. Testing of chemicals allows for improving the information base for regulatory decision-making on chemicals' production and use. Testing a large number of chemicals with

Model tool to describe chemical structures in XML format utilizing structural fragments and chemical ontology.

Science.gov (United States)

Sankar, Punnaivanam; Alain, Krief; Aghila, Gnanasekaran

2010-05-24

We have developed a model structure-editing tool, ChemEd, programmed in JAVA, which allows drawing chemical structures on a graphical user interface (GUI) by selecting appropriate structural fragments defined in a fragment library. The terms representing the structural fragments are organized in fragment ontology to provide a conceptual support. ChemEd describes the chemical structure in an XML document (ChemFul) with rich semantics explicitly encoding the details of the chemical bonding, the hybridization status, and the electron environment around each atom. The document can be further processed through suitable algorithms and with the support of external chemical ontologies to generate understandable reports about the functional groups present in the structure and their specific environment.

Views on chemical safety information and influences on chemical disposal behaviour in the UK

International Nuclear Information System (INIS)

Hinks, J.; Bush, J.; Andras, P.; Garratt, J.; Pigott, G.; Kennedy, A.; Pless-Mulloli, T.

2009-01-01

This study examined how groups representing four tiers in the chemical supply chain (manufacturers, vendors, workers and consumers) understood safety information, and the factors that influenced disposal behaviour. Data from seven, semi-structured, focus groups was analysed both qualitatively (textual analysis) and quantitatively (network analysis). Such combined analytical methods enabled us to achieve both detailed insights into perceptions and behaviour and an objective understanding of the prevailing opinions that occurred within and between the focus group discussions. We found issues around awareness, trust, access and disposal behaviours differed between groups within the supply chain. Participants from the lower tiers perceived chemical safety information to be largely inaccessible. Labels were the main source of information on chemical risks for the middle and bottom tiers of the supply chain. Almost all of the participants were aware of the St Andrew's Cross and skull and crossbones symbols but few were familiar with the Volatile Organic Compound logo or the fish and tree symbol. Both the network and thematic analysis demonstrated that whilst frequent references to health risks associated with chemicals were made environmental risks were usually only articulated after prompting. It is clear that the issues surrounding public understanding of chemical safety labels are highly complex and this is compounded by inconsistencies in the cognitive profiles of chemical users. Substantially different cognitive profiles are likely to contribute towards communication difficulties between different tiers of the supply chain. Further research is needed to examine the most effective ways of communicating chemical hazards information to the public. The findings demonstrate a need to improve and simplify disposal guidance to members of the public, to raise public awareness of the graphic symbols in the CHIP 3.1, 2005 regulations and to improve access to disposal guidance

Local chemical potential, local hardness, and dual descriptors in temperature dependent chemical reactivity theory.

Science.gov (United States)

Franco-Pérez, Marco; Ayers, Paul W; Gázquez, José L; Vela, Alberto

2017-05-31

In this work we establish a new temperature dependent procedure within the grand canonical ensemble, to avoid the Dirac delta function exhibited by some of the second order chemical reactivity descriptors based on density functional theory, at a temperature of 0 K. Through the definition of a local chemical potential designed to integrate to the global temperature dependent electronic chemical potential, the local chemical hardness is expressed in terms of the derivative of this local chemical potential with respect to the average number of electrons. For the three-ground-states ensemble model, this local hardness contains a term that is equal to the one intuitively proposed by Meneses, Tiznado, Contreras and Fuentealba, which integrates to the global hardness given by the difference in the first ionization potential, I, and the electron affinity, A, at any temperature. However, in the present approach one finds an additional temperature-dependent term that introduces changes at the local level and integrates to zero. Additionally, a τ-hard dual descriptor and a τ-soft dual descriptor given in terms of the product of the global hardness and the global softness multiplied by the dual descriptor, respectively, are derived. Since all these reactivity indices are given by expressions composed of terms that correspond to products of the global properties multiplied by the electrophilic or nucleophilic Fukui functions, they may be useful for studying and comparing equivalent sites in different chemical environments.

Chemical Sciences Division: Annual report 1992

International Nuclear Information System (INIS)

1993-10-01

The Chemical Sciences Division (CSD) is one of twelve research Divisions of the Lawrence Berkeley Laboratory, a Department of Energy National Laboratory. The CSD is composed of individual groups and research programs that are organized into five scientific areas: Chemical Physics, Inorganic/Organometallic Chemistry, Actinide Chemistry, Atomic Physics, and Physical Chemistry. This report describes progress by the CSD for 1992. Also included are remarks by the Division Director, a description of work for others (United States Office of Naval Research), and appendices of the Division personnel and an index of investigators. Research reports are grouped as Fundamental Interactions (Photochemical and Radiation Sciences, Chemical Physics, Atomic Physics) or Processes and Techniques (Chemical Energy, Heavy-Element Chemistry, and Chemical Engineering Sciences)

Chemical process safety at fuel cycle facilities

International Nuclear Information System (INIS)

Ayres, D.A.

1997-08-01

This NUREG provides broad guidance on chemical safety issues relevant to fuel cycle facilities. It describes an approach acceptable to the NRC staff, with examples that are not exhaustive, for addressing chemical process safety in the safe storage, handling, and processing of licensed nuclear material. It expounds to license holders and applicants a general philosophy of the role of chemical process safety with respect to NRC-licensed materials; sets forth the basic information needed to properly evaluate chemical process safety; and describes plausible methods of identifying and evaluating chemical hazards and assessing the adequacy of the chemical safety of the proposed equipment and facilities. Examples of equipment and methods commonly used to prevent and/or mitigate the consequences of chemical incidents are discussed in this document

Chemical investigation of the effluents of selected chemical industries in NWFP (Pakistan)

International Nuclear Information System (INIS)

Jan, M.R.; Shah, J.; Shah, H.

2002-01-01

Samples of effluents were collected from the waste water drains of selected chemical industries, located at small industries estate Kohat Road Peshawar on monthly basis from November 1994 to October 1995. These samples were studied for physico chemical properties and heavy metals like Pb, Ag, Cu, Zn, Fe, Cr, Cd, Mn and Ni using spectroscopic techniques. The results of our investigation are presented and discussed. (author)

DECOLORIZATION AND CHEMICAL REGENERATION OF ...

African Journals Online (AJOL)

Preferred Customer

Institute of Chemical Industry of Forest Products, CAF, Nanjing 210042, China ... of chemical method was an attractive economic factor. ... pharmaceutical industries. Today ... enzyme-treated starch. ... liquid, which increases production costs.

Low temperature radio-chemical energy conversion processes

International Nuclear Information System (INIS)

Gomberg, H.J.

1986-01-01

This patent describes a radio-chemical method of converting radiated energy into chemical energy form comprising the steps of: (a) establishing a starting chemical compound in the liquid phase that chemically reacts endothermically to radiation and heat energy to produce a gaseous and a solid constituent of the compound, (b) irradiating the compound in its liquid phase free of solvents to chemically release therefrom in response to the radiation the gaseous and solid constituents, (c) physically separating the solid and gaseous phase constituents from the liquid, and (d) chemically processing the constituents to recover therefrom energy stored therein by the irradiation step (b)

Pesticides: chemicals for survival

International Nuclear Information System (INIS)

Lindquist, D.A.

1981-01-01

Pesticides are chemicals used to control pests such as insects, weeds, plant diseases, nematodes, and rodents. The increased use of pesticides since 1945 has greatly aided the increase in crop production, protected livestock from diseases such as trypanosomiasis, protected man from diseases such as malaria and filarisis, decreased losses of stored grain, and has generally improved man's welfare. Despite the enormous benefits derived from pesticides these chemicals are not problem-free. Many pesticides are toxic to living organisms and interfere with specific biochemical systems. To measure the very small quantities of a pesticide radiolabelled chemicals are frequently essential, particularly to measure changes in the chemical structure of the pesticide, movement of the pesticide in soil, plants, or animals, amounts of pesticide going through various steps in food processing, etc. The use of radiolabelled pesticides is shortly shown for metabolism of the pesticide in crop species, metabolism in ruminant, in chickens and eggs, in soil, and possibly leaching and sorption in soil, hydrolysis, bio-concentration, microbial and photodegradation, and toxicity studies

The Architecture of Chemical Alternatives Assessment.

Science.gov (United States)

Geiser, Kenneth; Tickner, Joel; Edwards, Sally; Rossi, Mark

2015-12-01

Chemical alternatives assessment is a method rapidly developing for use by businesses, governments, and nongovernment organizations seeking to substitute chemicals of concern in production processes and products. Chemical alternatives assessment is defined as a process for identifying, comparing, and selecting safer alternatives to chemicals of concern (including those in materials, processes, or technologies) on the basis of their hazards, performance, and economic viability. The process is intended to provide guidance for assuring that chemicals of concern are replaced with safer alternatives that are not likely to be later regretted. Conceptually, the assessment methods are developed from a set of three foundational pillars and five common principles. Based on a number of emerging alternatives assessment initiatives, in this commentary, we outline a chemical alternatives assessment blueprint structured around three broad steps: Scope, Assessment, and Selection and Implementation. Specific tasks and tools are identified for each of these three steps. While it is recognized that on-going practice will further refine and develop the method and tools, it is important that the structure of the assessment process remain flexible, adaptive, and focused on the substitution of chemicals of concern with safer alternatives. © 2015 Society for Risk Analysis.

DNA adducts-chemical addons

Directory of Open Access Journals (Sweden)

T R Rajalakshmi

2015-01-01

Full Text Available DNA adduct is a piece of DNA covalently bond to a chemical (safrole, benzopyrenediol epoxide, acetaldehyde. This process could be the start of a cancerous cell. When a chemical binds to DNA, it gets damaged resulting in abnormal replication. This could be the start of a mutation and without proper DNA repair, this can lead to cancer. It is this chemical that binds with the DNA is our prime area of concern. Instead of performing the whole body analysis for diagnosing cancer, this test could be carried out for early detection of cancer. When scanning tunneling microscope is used, the DNA results can be obtained earlier. DNA adducts in scientific experiments are used as biomarkers.

Control in the Chemical Industry

Science.gov (United States)

Jones, R. G.

1974-01-01

Discusses various control techniques used in chemical processes, including measuring devices, controller functions, control valves, and feedforward and feedback actions. Applications of control to a real chemical plant are exemplified. (CC)

77 FR 7613 - Dow Chemical Company; Dow Chemical TRIGA Research Reactor; Facility Operating License No. R-108

Science.gov (United States)

2012-02-13

... NUCLEAR REGULATORY COMMISSION [Docket No. 50-264; NRC-2012-0026] Dow Chemical Company; Dow Chemical TRIGA Research Reactor; Facility Operating License No. R-108 AGENCY: Nuclear Regulatory Commission... Facility Operating License No. R-108 (``Application''), which currently authorizes the Dow Chemical Company...

Chemicals regulation and the Porter Hypothesis:a critical review of the new European chemicals regulation

OpenAIRE

Frohwein, T. (Torsten); Hansjürgens, B. (Bernd)

2005-01-01

In this contribution, discussions about the Porter Hypothesis and the pros and cons of the new European chemicals regulation system REACH are tied together. The contribution seeks to apply the Porter Hypothesis to the field of European chemicals regulation. Porter’s claim of positive effects of regulation on innovations seems especially important for the chemicals sector pursuing differentiation. But, understanding Porter’s concept of strategic management indicates that certain segments of th...

Response of macrobenthic communties to oil spills along Goa coast

Digital Repository Service at National Institute of Oceanography (India)

Gregory, A.

burned after the Royal Air Force made a bombing run over the site. Both oil and detergents devastated seabirds and shore invertebrates. It was clear that tanker accidents could have a devastating effect on marine life (Smith, 1968). Amoco Cadiz (1978...

The Marginal Value of the CRAF DC-10-10 Compared to the KC-10A

National Research Council Canada - National Science Library

1981-01-01

...) DC-lO-lO aircraft was provided for HQ USAF review. In light of the modification costs, AF/SA was tasked to examine the marginal value between the proposal and the procurement of additional Air Force KC-1OA tankers...

Some problems and prospects for marine transportation of oil in the 1970s

Science.gov (United States)

Zannetos, Z. S.

1973-01-01

The problems associated with, and the financial resources required for ocean transportation of petroleum in the 1970s are discussed in terms of the energy crisis. Spot rate fluctuations for tankers are examined along with the financial requirements for ocean transportation.

Vessel Monitoring Systems Study. Volume I - Technical Analysis.

Science.gov (United States)

1980-09-01

In the Port and Tanker Safety Act of 1978 the U.S. Conress directed the Department of Transportation to performa a study on the desirability and feasibility of a shore-station system for monitoring vessels (including fishing vessels)offshore within t...

77 FR 70526 - Shipping Coordinating Committee; Notice of Committee Meeting

Science.gov (United States)

2012-11-26

... from machinery spaces --Development of requirements for ships carrying hydrogen and compressed natural gas vehicles --Consideration of IACS unified interpretations --Harmonization of the requirements for the location of entrances, air inlets and openings in the superstructures of tankers --Development of...

Cow Power: A Case Study of Renewable Compressed Natural Gas as a Transportation Fuel

Energy Technology Data Exchange (ETDEWEB)

Mintz, Marianne [Argonne National Lab. (ANL), Argonne, IL (United States); Tomich, Matthew [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-08-01

This case study explores the production and use of renewable compressed natural gas (R-CNG)—derived from the anaerobic digestion (AD) of dairy manure—to fuel 42 heavy-duty milk tanker trucks operating in Indiana, Michigan, Tennessee, and Kentucky.

Marine pollution : progress made to reduce marine pollution by cruise ships, but important issues remain

Science.gov (United States)

2000-02-01

From 1993 through 1998-the most recent year for which data are available-cargo ships, tankers, cruise ships, and other commercial vessels registered, or "flagged," in foreign countries have been involved in almost 2,400 confirmed cases of illegally d...

Mürgitankeri jäätmed võivad minna Ida-Virumaale töötlusse / Ingvar Bärenklau

Index Scriptorium Estoniae

Bärenklau, Ingvar, 1967-

2006-01-01

Mürgitamiskahtlusega tanker Probo Koala võib Paldiski sadamast lahkuda, kui lahendatakse logistikaülesanne, kuidas toimetada ligi 600 kuupmeetrit mürgist vett Paldiskist Ida-Virumaale Vaivara ohtlike jäätmete käitlemise keskusse. Lisa: Probo Koala Eestis

NIF: Impacts of chemical accidents and comparison of chemical/radiological accident approaches

International Nuclear Information System (INIS)

Lazaro, M.A.; Policastro, A.J.; Rhodes, M.

1996-01-01

The US Department of Energy (DOE) proposes to construct and operate the National Ignition Facility (NIF). The goals of the NIF are to (1) achieve fusion ignition in the laboratory for the first time by using inertial confinement fusion (ICF) technology based on an advanced-design neodymium glass solid-state laser, and (2) conduct high-energy-density experiments in support of national security and civilian applications. The primary focus of this paper is worker-public health and safety issues associated with postulated chemical accidents during the operation of NIF. The key findings from the accident analysis will be presented. Although NIF chemical accidents will be emphasized, the important differences between chemical and radiological accident analysis approaches and the metrics for reporting results will be highlighted. These differences are common EIS facility and transportation accident assessments

International Trade of Croatian Chemical Industry Summary

Directory of Open Access Journals (Sweden)

Goran Buturac

2009-07-01

Full Text Available In this paper Croatian chemical industry in international trade is analyzed by applying k-means cluster method. The work is oriented toward the role and contribution of individual product groups in total trade patterns of chemical industry. The RCA indicator, GL index, RUV indicator and the share of individual chemical products in the total export of chemical industry are used as variables. The products at the fourdigit level of the SITC are used as objects. The cluster of chemical products in which Croatia has comparative advantages contributes significantly in export structure. At the same time this cluster consists of a few product types thus indicating strong export concentration of Croatian chemical industry. Regarding of the value of RUV indicator, Croatian chemical industry benefits most in the international trade with antibiotics and medicines that contain antibiotics. Beside fertilizers, these two products have the greatest share in the export structure. The great majority of the chemical products have the low level of intra-industry trade specialization.

Employment in the U.S. Chemical Industry. Chemical Work Force Tops 1.1 Million.

Science.gov (United States)

Chemical and Engineering News, 1990

1990-01-01

The annual census of industrial employment, production workers, women, the workweek, scientists and engineers, chemical employment, wages, and productivity in the chemical industry is presented. Trends in the numbers of workers, productivity, and unit labor costs are illustrated in graphs. (CW)

Management of chemical disposal in BARC

International Nuclear Information System (INIS)

Shenoy, K.T.; Deolekar, Shailesh

2017-01-01

Most of the activities in BARC are of radiological in nature and are regulated as per Atomic Energy Act 1962. The radioactive waste generated is managed safely as per Atomic Energy (Safe Disposal of Radioactive Waste) Rules, 1987. However, many developmental activities related to nuclear fuel cycle and laboratories, which support the quality control aspects, generate inactive chemical waste. In addition, being multidisciplinary in nature, BARC carries out research in frontiers of chemical science for societal benefit and academic interest. All these scientific activities over the decades have resulted in accumulation of many partially used/surplus laboratory chemicals. These chemicals are in large varieties though small in terms of quantity. Although these chemicals do not have any further utility and commercial value, can add to potential hazards and hence require safe disposal. Considering this, BARC Safety Council(BSC) has re-constituted the 'Advisory Committee for Chemical Disposal (ACCD)' on March 18, 2016

Bioinspired Chemical Communication between Synthetic Nanomotors.

Science.gov (United States)

Chen, Chuanrui; Chang, Xiaocong; Teymourian, Hazhir; Ramírez-Herrera, Doris E; Esteban-Fernández de Ávila, Berta; Lu, Xiaolong; Li, Jinxing; He, Sha; Fang, Chengcheng; Liang, Yuyan; Mou, Fangzhi; Guan, Jianguo; Wang, Joseph

2018-01-02

While chemical communication plays a key role in diverse natural processes, the intelligent chemical communication between synthetic nanomotors remains unexplored. The design and operation of bioinspired synthetic nanomotors is presented. Chemical communication between nanomotors is possible and has an influence on propulsion behavior. A chemical "message" is sent from a moving activator motor to a nearby activated (receiver) motor by release of Ag + ions from a Janus polystyrene/Ni/Au/Ag activator motor to the activated Janus SiO 2 /Pt nanomotor. The transmitted silver signal is translated rapidly into a dramatic speed change associated with the enhanced catalytic activity of activated motors. Selective and successive activation of multiple nanomotors is achieved by sequential localized chemical communications. The concept of establishing chemical communication between different synthetic nanomotors paves the way to intelligent nanoscale robotic systems that are capable of cooperating with each other. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Comparative toxicity of chemicals to earthworms

Energy Technology Data Exchange (ETDEWEB)

Callahan, C.A.; Shirazi, M.A. (Environmental Protection Agency, Corvallis, OR (United States)); Neuhauser, E.F. (Niagara Mohawk Power Corp., Syracuse, NY (United States))

1994-02-01

The concentration-response (mortality) relationships of four species of earthworms, Eisenia fetida (Savigny), Allolobophora tuberculata (Eisen), Eudrilus eugeniae (Kinberg), and Perionyx excavatus (Perrier) are summarized for 62 chemicals and two test protocols. A Weibull function is used to summarize these data for each chemical in terms of sensitivity and toxicity, in addition to the LC50. The estimation of the Weibull parameters a and k summarize the entire concentration-response relationship. This technique should be applicable to a variety of testing protocols with different species whenever the goal is summarizing the shape of the concentration-response curves to fully evaluate chemical impact on organisms. In some cases for these data four orders of magnitude separate LC50s of the soil test and the contact test for the same chemical and species. All four species appear to be similar in range of toxicity and tolerance to these chemicals, suggesting that Eisenia fetida and may be representative of these four species and these chemicals.

Nuclear industry - challenges in chemical engineering

International Nuclear Information System (INIS)

Sen, S.; Sunder Rajan, N.S.; Balu, K.; Garg, R.K.; Murthy, L.G.K.; Ramani, M.P.S.; Rao, M.K.; Sadhukhan, H.K.; Venkat Raj, V.

1978-01-01

As chemical engineering processes and operations are closely involved in many areas of nuclear industry, the chemical engineer has a vital role to play in its growth and development. An account of the major achievements of the Indian chemical engineers in this field is given with view of impressing upon the faculty members of the Indian universities the need for taking appropriate steps to prepare chemical engineers suitable for nuclear industry. Some of the major achievements of the Indian chemical engineers in this field are : (1) separation of useful minerals from beach sand, (2) preparation of thorium nitrate of nuclear purity from monazite, (3) processing of zircon sand to obtain nuclear grade zirconium and its separation from hafnium to obtain zirconium metal sponge, (4) recovery of uranium from copper tailings, (5) economic recovery of nuclear grade uranium from low grade uranium ores found in India, (6) fuel reprocessing, (7) chemical processing of both low and high level radioactive wastes. (M.G.B.)

Scaling up of renewable chemicals.

Science.gov (United States)

Sanford, Karl; Chotani, Gopal; Danielson, Nathan; Zahn, James A

2016-04-01

The transition of promising technologies for production of renewable chemicals from a laboratory scale to commercial scale is often difficult and expensive. As a result the timeframe estimated for commercialization is typically underestimated resulting in much slower penetration of these promising new methods and products into the chemical industries. The theme of 'sugar is the next oil' connects biological, chemical, and thermochemical conversions of renewable feedstocks to products that are drop-in replacements for petroleum derived chemicals or are new to market chemicals/materials. The latter typically offer a functionality advantage and can command higher prices that result in less severe scale-up challenges. However, for drop-in replacements, price is of paramount importance and competitive capital and operating expenditures are a prerequisite for success. Hence, scale-up of relevant technologies must be interfaced with effective and efficient management of both cell and steel factories. Details involved in all aspects of manufacturing, such as utilities, sterility, product recovery and purification, regulatory requirements, and emissions must be managed successfully. Copyright © 2016 Elsevier Ltd. All rights reserved.

Wiley guide to chemical incompatibilities

National Research Council Canada - National Science Library

Pohanish, Richard P; Greene, Stanley A

2009-01-01

.... A portable and easy-to-use reference on reactive substances commonly found in commerce, the Wiley Guide to Chemical Incompatibilities, Third Edition compiles hard-to-find data on over 11,000 chemical...

Quarterly Progress Report for the Chemical and Energy Research Section of the Chemical Technology Division: April-June 1998

Energy Technology Data Exchange (ETDEWEB)

Jubin, R.T.

1999-04-01

This report summarizes the major activities conducted in the Chemical and Energy Research Section of the Chemical Technology Division at Oak Ridge National Laboratory (ORNL) during th eperiod April-June 1998. The section conducts basic and applied research and development in chemical engineering, applied chemistry, and bioprocessing, with an emphasis on energy-driven technologies and advanced chemical separations for nuclear and waste applications.

46 CFR 154.1150 - Distribution of dry chemical.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Distribution of dry chemical. 154.1150 Section 154.1150... Firefighting System: Dry Chemical § 154.1150 Distribution of dry chemical. (a) All locations on the above deck... chemical hand hose lines; or (2) At least one dry chemical hand hose line and one dry chemical monitor. (b...

Chemical Safety Vulnerability Working Group report. Volume 1

Energy Technology Data Exchange (ETDEWEB)

1994-09-01

The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 1 contains the Executive summary; Introduction; Summary of vulnerabilities; Management systems weaknesses; Commendable practices; Summary of management response plan; Conclusions; and a Glossary of chemical terms.

Chemical Safety Vulnerability Working Group report. Volume 1

International Nuclear Information System (INIS)

1994-09-01

The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 1 contains the Executive summary; Introduction; Summary of vulnerabilities; Management systems weaknesses; Commendable practices; Summary of management response plan; Conclusions; and a Glossary of chemical terms

Summaries of the 40. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

International Nuclear Information System (INIS)

1997-01-01

Annual 40. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry has been held in Gdansk on 22-26 September 1997. The most valuable scientific results obtained in Polish Laboratories have been presented in 22 main sections and 7 symposia directed especially at following subjects: analytical chemistry, biochemistry, solid state chemistry and material science, physical chemistry, heteroorganic and coordination chemistry, medical and pharmaceutical chemistry, metalorganic chemistry, inorganic and organic chemistry, polymers chemistry, chemistry and environment protection, theoretical chemistry, chemical didactics, photochemistry, radiation chemistry and chemical kinetics, chemical engineering, catalysis, crystallochemistry, chemical technology, electrochemistry, and instrumental methods

40 CFR 720.85 - Chemical identity.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Chemical identity. 720.85 Section 720... PREMANUFACTURE NOTIFICATION Confidentiality and Public Access to Information § 720.85 Chemical identity. (a... submits information to EPA under this part may assert a claim of confidentiality for the chemical identity...

Overall view of chemical and biochemical weapons.

Science.gov (United States)

Pitschmann, Vladimír

2014-06-04

This article describes a brief history of chemical warfare, which culminated in the signing of the Chemical Weapons Convention. It describes the current level of chemical weapons and the risk of using them. Furthermore, some traditional technology for the development of chemical weapons, such as increasing toxicity, methods of overcoming chemical protection, research on natural toxins or the introduction of binary technology, has been described. In accordance with many parameters, chemical weapons based on traditional technologies have achieved the limit of their development. There is, however, a big potential of their further development based on the most recent knowledge of modern scientific and technical disciplines, particularly at the boundary of chemistry and biology. The risk is even higher due to the fact that already, today, there is a general acceptance of the development of non-lethal chemical weapons at a technologically higher level. In the future, the chemical arsenal will be based on the accumulation of important information from the fields of chemical, biological and toxin weapons. Data banks obtained in this way will be hardly accessible and the risk of their materialization will persist.

Overall View of Chemical and Biochemical Weapons

Directory of Open Access Journals (Sweden)

Vladimír Pitschmann

2014-06-01

Full Text Available This article describes a brief history of chemical warfare, which culminated in the signing of the Chemical Weapons Convention. It describes the current level of chemical weapons and the risk of using them. Furthermore, some traditional technology for the development of chemical weapons, such as increasing toxicity, methods of overcoming chemical protection, research on natural toxins or the introduction of binary technology, has been described. In accordance with many parameters, chemical weapons based on traditional technologies have achieved the limit of their development. There is, however, a big potential of their further development based on the most recent knowledge of modern scientific and technical disciplines, particularly at the boundary of chemistry and biology. The risk is even higher due to the fact that already, today, there is a general acceptance of the development of non-lethal chemical weapons at a technologically higher level. In the future, the chemical arsenal will be based on the accumulation of important information from the fields of chemical, biological and toxin weapons. Data banks obtained in this way will be hardly accessible and the risk of their materialization will persist.

Chemical dependency and adolescent self-esteem.

Science.gov (United States)

Wasson, D; Anderson, M A

1995-08-01

The purpose of this descriptive study is to determine whether self-esteem differs between chemically dependent adolescents and adolescents from the general high school population. The Self-Esteem Inventory (Coopersmith, 1987) was completed by 119 adolescents (31 inpatient, 31 aftercare, and 57 general high school students) aged 13 to 18. Findings suggest that inpatient, chemically dependent adolescents have lower self-esteem than the other two groups. For the chemically dependent adolescent, nursing case management with communication among and between health care providers, school professionals, and family may facilitate successful, long-term recovery. For adolescents at risk for development of chemical dependence, nursing health promotion behaviors, such as early assessment and implementation of self-esteem-building activities, may assist in prevention of chemical dependency.

Innovations in Undergraduate Chemical Biology Education.

Science.gov (United States)

Van Dyke, Aaron R; Gatazka, Daniel H; Hanania, Mariah M

2018-01-19

Chemical biology derives intellectual vitality from its scientific interface: applying chemical strategies and perspectives to biological questions. There is a growing need for chemical biologists to synergistically integrate their research programs with their educational activities to become holistic teacher-scholars. This review examines how course-based undergraduate research experiences (CUREs) are an innovative method to achieve this integration. Because CUREs are course-based, the review first offers strategies for creating a student-centered learning environment, which can improve students' outcomes. Exemplars of CUREs in chemical biology are then presented and organized to illustrate the five defining characteristics of CUREs: significance, scientific practices, discovery, collaboration, and iteration. Finally, strategies to overcome common barriers in CUREs are considered as well as future innovations in chemical biology education.

Chemical Engineering in the "BIO" World.

Science.gov (United States)

Chiarappa, Gianluca; Grassi, Mario; Abrami, Michela; Abbiati, Roberto Andrea; Barba, Anna Angela; Boisen, Anja; Brucato, Valerio; Ghersi, Giulio; Caccavo, Diego; Cascone, Sara; Caserta, Sergio; Elvassore, Nicola; Giomo, Monica; Guido, Stefano; Lamberti, Gaetano; Larobina, Domenico; Manca, Davide; Marizza, Paolo; Tomaiuolo, Giovanna; Grassi, Gabriele

2017-01-01

Modern Chemical Engineering was born around the end of the 19th century in Great Britain, Germany, and the USA, the most industrialized countries at that time. Milton C. Whitaker, in 1914, affirmed that the difference between Chemistry and Chemical Engineering lies in the capability of chemical engineers to transfer laboratory findings to the industrial level. Since then, Chemical Engineering underwent huge transformations determining the detachment from the original Chemistry nest. The beginning of the sixties of the 20th century saw the development of a new branch of Chemical Engineering baptized Biomedical Engineering by Peppas and Langer and that now we can name Biological Engineering. Interestingly, although Biological Engineering focused on completely different topics from Chemical Engineering ones, it resorted to the same theoretical tools such as, for instance, mass, energy and momentum balances. Thus, the birth of Biological Engineering may be considered as a Darwinian evolution of Chemical Engineering similar to that experienced by mammals which, returning to water, used legs and arms to swim. From 1960 on, Biological Engineering underwent a considerable evolution as witnessed by the great variety of topics covered such as hemodialysis, release of synthetic drugs, artificial organs and, more recently, delivery of small interfering RNAs (siRNA). This review, based on the activities developed in the frame of our PRIN 2010-11 (20109PLMH2) project, tries to recount origins and evolution of Chemical Engineering illustrating several examples of recent and successful applications in the biological field. This, in turn, may stimulate the discussion about the Chemical Engineering students curriculum studiorum update. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Insights into the mechanisms on chemical reactions: reaction paths for chemical reactions

International Nuclear Information System (INIS)

Dunning, T.H. Jr.; Rosen, E.; Eades, R.A.

1987-01-01

We report reaction paths for two prototypical chemical reactions: Li + HF, an electron transfer reaction, and OH + H 2 , an abstraction reaction. In the first reaction we consider the connection between the energetic terms in the reaction path Hamiltonian and the electronic changes which occur upon reaction. In the second reaction we consider the treatment of vibrational effects in chemical reactions in the reaction path formalism. 30 refs., 9 figs

Improved Optical Fiber Chemical Sensors

Science.gov (United States)

Egalon, Claudio O.; Rogowski, Robert S.

1994-01-01

Calculations, based on exact theory of optical fiber, have shown how to increase optical efficiency sensitivity of active-core, step-index-profile optical-fiber fluorosensor. Calculations result of efforts to improve efficiency of optical-fiber chemical sensor of previous concept described in "Making Optical-Fiber Chemical Sensors More Sensitive" (LAR-14525). Optical fiber chemical detector of enhanced sensitivity made in several configurations. Portion of fluorescence or chemiluminescence generated in core, and launched directly into bound electromagnetic modes that propagate along core to photodetector.

Chemical dynamics in the gas phase: Time-dependent quantum mechanics of chemical reactions

Energy Technology Data Exchange (ETDEWEB)

Gray, S.K. [Argonne National Laboratory, IL (United States)

1993-12-01

A major goal of this research is to obtain an understanding of the molecular reaction dynamics of three and four atom chemical reactions using numerically accurate quantum dynamics. This work involves: (i) the development and/or improvement of accurate quantum mechanical methods for the calculation and analysis of the properties of chemical reactions (e.g., rate constants and product distributions), and (ii) the determination of accurate dynamical results for selected chemical systems, which allow one to compare directly with experiment, determine the reliability of the underlying potential energy surfaces, and test the validity of approximate theories. This research emphasizes the use of recently developed time-dependent quantum mechanical methods, i.e. wave packet methods.

Tier II Chemical Storage Facilities

Data.gov (United States)

Iowa State University GIS Support and Research Facility — Facilities that store hazardous chemicals above certain quantities must submit an annual emergency and hazardous chemical inventory on a Tier II form. This is a...

Chemical Agents: Facts about Evacuation

Science.gov (United States)

... What CDC is Doing Blog: Public Health Matters Chemical Agents: Facts About Evacuation Format: Select One PDF [ ... on Facebook Tweet Share Compartir Some kinds of chemical accidents or attacks, such as a train derailment ...

Endocrine disrupting chemicals

DEFF Research Database (Denmark)

Mandrup, Karen

chemical ethinyl estradiol, only. In studies on exposure to anti-androgens, other endpoints, such as nipple retention showed effects in male rats at dose levels where no effects were observed in male or female mammary glands orfemale external genitals. However, in studies on estrogenic chemicals, marked...... effects on prepubertal female rat mammary glands were observed at lower levels than those affecting other endpoints studied. CONCLUSION: The present findings in rats suggest that EDCs may affect mammary gland development in women and men, although risk assessment including comparison with exposure...

Molecular activation analysis for chemical speciation studies

International Nuclear Information System (INIS)

Chai-Chifang

1998-01-01

The term of Molecular Activation Analysis (MAA) refers to an activation analysis method that is able to provide information about the chemical species of elements in system of interests, though its definition has remained to be assigned. Its development is strongly stimulated by the urgent need to know the chemical species of elements, because the total concentrations are often without any meaning when assessing health or environmental risks of trace elements.In practice, the MAA is a combination of conventional instrumental or radiochemical activation analysis and physical, chemical or biochemical separation techniques. The MAA is able to play a particular role in speciation studies. However, the critical point in the MAA is that it is not permitted to change the primitive chemical species of elements in systems, or the change has to be under control; in the meantime it is not allowed to form the 'new artifact' originally not present in systems. Some practical examples of MAA for chemical species research performed recently in our laboratory will be presented as follows: Chemical species of platinum group elements in sediment; Chemical species of iodine in marine algae; Chemical species of mercury in human tissues; Chemical species of selenium in corn; Chemical species of rare earth elements in natural plant, etc. The merits and limitations of MAA will be described as well. (author)

27 CFR 24.320 - Chemical record.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Chemical record. 24.320... OF THE TREASURY LIQUORS WINE Records and Reports § 24.320 Chemical record. A proprietor who uses chemicals, preservatives, or other such materials shall maintain a record of the purchase, receipt and...

Student Teachers' Knowledge about Chemical Representations

Science.gov (United States)

Taskin, Vahide; Bernholt, Sascha; Parchmann, Ilka

2017-01-01

Chemical representations serve as a communication tool not only in exchanges between scientists but also in chemistry lessons. The goals of the present study were to measure the extent of student teachers' knowledge about chemical representations, focusing on chemical formulae and structures in particular, and to explore which factors related to…

Chemical Safety Vulnerability Working Group report. Volume 3

Energy Technology Data Exchange (ETDEWEB)

1994-09-01

The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 3 consists of eleven appendices containing the following: Field verification reports for Idaho National Engineering Lab., Rocky Flats Plant, Brookhaven National Lab., Los Alamos National Lab., and Sandia National Laboratories (NM); Mini-visits to small DOE sites; Working Group meeting, June 7--8, 1994; Commendable practices; Related chemical safety initiatives at DOE; Regulatory framework and industry initiatives related to chemical safety; and Chemical inventory data from field self-evaluation reports.

Chemical Safety Vulnerability Working Group report. Volume 3

International Nuclear Information System (INIS)

1994-09-01

The Chemical Safety Vulnerability (CSV) Working Group was established to identify adverse conditions involving hazardous chemicals at DOE facilities that might result in fires or explosions, release of hazardous chemicals to the environment, or exposure of workers or the public to chemicals. A CSV Review was conducted in 148 facilities at 29 sites. Eight generic vulnerabilities were documented related to: abandoned chemicals and chemical residuals; past chemical spills and ground releases; characterization of legacy chemicals and wastes; disposition of legacy chemicals; storage facilities and conditions; condition of facilities and support systems; unanalyzed and unaddressed hazards; and inventory control and tracking. Weaknesses in five programmatic areas were also identified related to: management commitment and planning; chemical safety management programs; aging facilities that continue to operate; nonoperating facilities awaiting deactivation; and resource allocations. Volume 3 consists of eleven appendices containing the following: Field verification reports for Idaho National Engineering Lab., Rocky Flats Plant, Brookhaven National Lab., Los Alamos National Lab., and Sandia National Laboratories (NM); Mini-visits to small DOE sites; Working Group meeting, June 7--8, 1994; Commendable practices; Related chemical safety initiatives at DOE; Regulatory framework and industry initiatives related to chemical safety; and Chemical inventory data from field self-evaluation reports

Synthetic Biology for Specialty Chemicals.

Science.gov (United States)

Markham, Kelly A; Alper, Hal S

2015-01-01

In this review, we address recent advances in the field of synthetic biology and describe how those tools have been applied to produce a wide variety of chemicals in microorganisms. Here we classify the expansion of the synthetic biology toolbox into three different categories based on their primary function in strain engineering-for design, for construction, and for optimization. Next, focusing on recent years, we look at how chemicals have been produced using these new synthetic biology tools. Advances in producing fuels are briefly described, followed by a more thorough treatment of commodity chemicals, specialty chemicals, pharmaceuticals, and nutraceuticals. Throughout this review, an emphasis is placed on how synthetic biology tools are applied to strain engineering. Finally, we discuss organism and host strain diversity and provide a future outlook in the field.