WorldWideScience

Sample records for chemical process industry

  1. Chemicals Industry New Process Chemistry Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2000-08-01

    The Materials Technology I workshop was held in November 1998 to address future research needs for materials technology that will support the chemical industry. Areas covered included disassembly, recovery, reuse and renewable technology; new materials; and materials measurement and characterization. The Materials Technology II workshop was held in September 1999 and covered additives, modeling and prediction and an additional segment on new materials. Materials Technology Institute (MTI) for the Chemical Process Industries, Inc. and Air Products & Chemicals lead the workshops. The Materials Technology Roadmap presents the results from both workshops.

  2. Safety Considerations in the Chemical Process Industries

    Science.gov (United States)

    Englund, Stanley M.

    There is an increased emphasis on chemical process safety as a result of highly publicized accidents. Public awareness of these accidents has provided a driving force for industry to improve its safety record. There has been an increasing amount of government regulation.

  3. A Course in Project Evaluation in the Chemical Process Industries.

    Science.gov (United States)

    Valle-Riestra, J. Frank

    1983-01-01

    Describes a course designed to expose neophytes to methodology used in chemical process industries to evaluate commercial feasibility of proposed projects. Previously acquired disciplines are integrated to facilitate process synthesis, gain appreciation of nature of industrial projects and industrial viewpoint in managing them, and to become adept…

  4. Process Control Systems in the Chemical Industry: Safety vs. Security

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey Hahn; Thomas Anderson

    2005-04-01

    Traditionally, the primary focus of the chemical industry has been safety and productivity. However, recent threats to our nation’s critical infrastructure have prompted a tightening of security measures across many different industry sectors. Reducing vulnerabilities of control systems against physical and cyber attack is necessary to ensure the safety, security and effective functioning of these systems. The U.S. Department of Homeland Security has developed a strategy to secure these vulnerabilities. Crucial to this strategy is the Control Systems Security and Test Center (CSSTC) established to test and analyze control systems equipment. In addition, the CSSTC promotes a proactive, collaborative approach to increase industry's awareness of standards, products and processes that can enhance the security of control systems. This paper outlines measures that can be taken to enhance the cybersecurity of process control systems in the chemical sector.

  5. Chemical dehumidification and thermal regeneration: Applications in industrial processes

    Energy Technology Data Exchange (ETDEWEB)

    Lazzarin, R.; Longo, G.A.; Piccininni, F.

    1991-11-01

    Chemical dehumidification may be used in industrial dessiccation treatments operating with new air or closed cycle. The authors suggest a few schemes and analyze operation parameters and performance. Finally, comparisons are made with the most efficient systems that have been used so far: energy savings are between 25 and 40 per cent.

  6. Essentials of water systems design in the oil, gas, and chemical processing industries

    CERN Document Server

    Bahadori, Alireza; Boyd, Bill

    2013-01-01

    Essentials of Water Systems Design in the Oil, Gas and Chemical Processing Industries provides valuable insight for decision makers by outlining key technical considerations and requirements of four critical systems in industrial processing plants—water treatment systems, raw water and plant water systems, cooling water distribution and return systems, and fire water distribution and storage facilities. The authors identify the key technical issues and minimum requirements related to the process design and selection of various water supply systems used in the oil, gas, and chemical processing industries. This book is an ideal, multidisciplinary work for mechanical engineers, environmental scientists, and oil and gas process engineers.

  7. Process chemicals in the oil and gas industry: potential occupational hazards.

    Science.gov (United States)

    Cottle, M K; Guidotti, T L

    1990-01-01

    Numerous chemicals are used in various processes of the oil and gas industry: drilling, cementing, completion, stimulation, and production. The number and the complexity of composition of process chemicals has increased greatly over the last three decades. The occupational hazards of exposure to these agents has received little attention. We reviewed the various processes in the industry, the type of chemicals used in each process, and some of their characteristics. We placed emphasis on those for which significant toxicity has been established or is suspected, and those for which there is incomplete information on their chemistry and health hazards. This report is intended to form a basis for a more complete survey of the process chemicals, and to draw attention to the possibilities for toxic exposure resulting from use of these agents in the oil and gas industry. The ultimate objective is to promote the safe use of these agents in the industry. PMID:2190356

  8. Chemical industrial wastewater treated by combined biological and chemical oxidation process.

    Science.gov (United States)

    Guomin, Cao; Guoping, Yang; Mei, Sheng; Yongjian, Wang

    2009-01-01

    Wastewaters from phenol and rubber synthesis were treated by the activated sludge process in a large-scale chemical factory in Shanghai, but the final effluent quality cannot conform with the local discharge limit without using river water for dilution. Therefore, this chemical factory had to upgrade its wastewater treatment plant. To fully use the present buildings and equipment during upgrading of the chemical factory's wastewater treatment plant and to save operation costs, a sequential biological pre-treatement, chemical oxidation, and biological post-treatment (or BCB for short) process had been proposed and investigated in a pilot trial. The pilot trial results showed that about 80% COD in the chemical wastewater could be removed through anoxic and aerobic degradation in the biological pre-treatement section, and the residual COD in the effluent of the biological pre-treatment section belongs to refractory chemicals which cannot be removed by the normal biological process. The refractory chemicals were partial oxidized using Fenton's reagent in the chemical oxidation section to improve their biodegradability; subsequently the wastewater was treated by the SBR process in the biological post-treatment section. The final effluent COD reached the first grade discharge limit (process, the operation cost of the BCB process increased by about 0.5 yuan (RMB) per cubic metre wastewater, but about 1,240,000 m(3) a(-1) dilution water could be saved and the COD emission could be cut down by 112 tonne each year.

  9. Technology Roadmap: Energy and GHG reductions in the chemical industry via catalytic processes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-06-01

    The chemical industry is a large energy user; but chemical products and technologies also are used in a wide array of energy saving and/or renewable energy applications so the industry has also an energy saving role. The chemical and petrochemical sector is by far the largest industrial energy user, accounting for roughly 10% of total worldwide final energy demand and 7% of global GHG emissions. The International Council of Chemical Associations (ICCA) has partnered with the IEA and DECHEMA (Society for Chemical Engineering and Biotechnology) to describe the path toward further improvements in energy efficiency and GHG reductions in the chemical sector. The roadmap looks at measures needed from the chemical industry, policymakers, investors and academia to press on with catalysis technology and unleash its potential around the globe. The report uncovers findings and best practice opportunities that illustrate how continuous improvements and breakthrough technology options can cut energy use and bring down greenhouse gas (GHG) emission rates. Around 90% of chemical processes involve the use of catalysts – such as added substances that increase the rate of reaction without being consumed by it – and related processes to enhance production efficiency and reduce energy use, thereby curtailing GHG emission levels. This work shows an energy savings potential approaching 13 exajoules (EJ) by 2050 – equivalent to the current annual primary energy use of Germany.

  10. The renewable chemicals industry

    DEFF Research Database (Denmark)

    Christensen, Claus H.; Rass-Hansen, J.; Marsden, Charlotte Clare;

    2008-01-01

    per kilogram of desired product to illustrate in which processes the use of renewable resources lead to the most substantial reduction of CO2 emissions. The steps towards a renewable chemicals industry will most likely involve intimate integration of biocatalytic and conventional catalytic processes...

  11. Chemicals Industry Vision

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1996-12-01

    Chemical industry leaders articulated a long-term vision for the industry, its markets, and its technology in the groundbreaking 1996 document Technology Vision 2020 - The U.S. Chemical Industry. (PDF 310 KB).

  12. Applications for Solid-State Joints in the chemical process industry

    Science.gov (United States)

    Goin, R. David

    2008-11-01

    Two forms of solid-state joining of tubing are explored here for use in the chemical process industry and other applications. Extrusion bonding consists of diffusion bonding an inner seamless tube of one material to an outer seamless tube of another material. Inertia welding consists of rotating one tube while pressing a second stationary tube into the first. In both cases, a very strong and robust metallurgical bond can result. This paper explores the testing and properties of such metallurgical bonds.

  13. Multivariate Statistical Process Monitoring and Control:Recent Developments and Applications to Chemical Industry

    Institute of Scientific and Technical Information of China (English)

    梁军; 钱积新

    2003-01-01

    Multivariate statistical process monitoring and control (MSPM& C) methods for chemical process monitoring with statistical projection techniques such as principal component analysis (PCA) and partial least squares (PLS) are surveyed in this paper,The four-step procedure of performing MSPM &C for chemical process ,modeling of processes ,detecting abnormal events or faults,identifying the variable(s) responible for the faults and diagnosing the source cause for the abnormal behavior,is analyzed,Several main research directions of MSPM&C reported in the literature are discussed,such as multi-way principal component analysis (MPCA) for batch process ,statistical monitoring and control for nonlinear process,dynamic PCA and dynamic PLS,and on -line quality control by infer-ential models,Industrial applications of MSPM&C to several typical chemical processes ,such as chemical reactor,distillation column,polymeriztion process ,petroleum refinery units,are summarized,Finally,some concluding remarks and future considerations are made.

  14. Management of change: Lessons learned from staff reductions in the chemical process industry

    NARCIS (Netherlands)

    Zwetsloot, G.I.J.M.; Gort, J.; Steijger, N.; Moonen, C.

    2007-01-01

    Increasing global competition and shareholder pressure are causing major changes in the chemical industry. Over the last decade companies have been continuously improving staff efficiency. As a result, most modern chemical plants can be regarded as lean. Plans to further reduce the number of staff h

  15. An integrated approach towards safety during change in the chemical process industry

    NARCIS (Netherlands)

    Gort, J.; Zwetsloot, G.I.J.M.; Lemkowitz, S.; Steijger, N.; Moonen, C.

    2004-01-01

    Increasing global competition and shareholder pressure cause major changes in the chemical industry. Over the last decade companies continuously improve their manpower efficiency. As a result most chemical plants of today can be regarded as lean plants. Plans to further reduce the number of staff ar

  16. Environmental Cracking of Corrosion Resistant Alloys in the Chemical Process Industry - A Review

    Energy Technology Data Exchange (ETDEWEB)

    Rebak, R B

    2006-12-04

    A large variety of corrosion resistant alloys are used regularly in the chemical process industry (CPI). The most common family of alloys include the iron (Fe)-based stainless steels, nickel (Ni) alloys and titanium (Ti) alloys. There also other corrosion resistant alloys but their family of alloys is not as large as for the three groups mentioned above. All ranges of corrosive environments can be found in the CPI, from caustic solutions to hot acidic environments, from highly reducing to highly oxidizing. Stainless steels are ubiquitous since numerous types of stainless steels exist, each type tailored for specific applications. In general, stainless steels suffer stress corrosion cracking (SCC) in hot chloride environments while high Ni alloys are practically immune to this type of attack. High nickel alloys are also resistant to caustic cracking. Ti alloys find application in highly oxidizing solutions. Solutions containing fluoride ions, especially acid, seem to be aggressive to almost all corrosion resistant alloys.

  17. Use of wastes in high-temperature processes of the chemical industry; Verwertung von Abfaellen in Hochtemperaturprozessen der chemischen Industrie

    Energy Technology Data Exchange (ETDEWEB)

    Seifert, H. [Forschungszentrum Karlsruhe GmbH Technik und Umwelt (Germany); Domschke, T.; Steinebrunner, K. [BASF AG, Ludwigshafen am Rhein (Germany)

    1998-09-01

    The examples presented in this paper from diverse application areas of the chemical industry serve as an illustration of the many different ways in which wastes can be used for high-temperature processes in this branch. A review of the environmentally friendly concepts implemented at BASF AG in Ludwigshafen in the course of the past five years gives an idea of the immense potential opened up by a consistent application of the four-stage model for the prevention, reduction, and utilisation of wastes. In this period it was possible to reduce waste arisings by 34%, down from a potential 2 million tons, physically recycle 51%, and convert 11.5% to energy. This left a comparatively small fraction of 3.5%, or 70,000 tons, to be disposed of in an environmentally acceptable way. Furthermore, the amount of pollutants produced per tonne of products sold fell from 40.6 kg in 1987 to 6.7 kg in 1997. [Deutsch] Die Beispiele aus den unterschiedlichsten Anwendungsbereichen der chemischen Industrie koennen als Auswahl der vielfaeltigen Verwertungsmoeglichkeiten von Abfaellen in Hochtemperaturprozessen der Chemie betrachtet werden. Das immense Potential, das sich durch konsequente Anwendung des 4-Stufen-Modells zur Vermeidung, Verminderung und Verwertung von Abfaellen eroeffnet, zeigt sich in einer Fuenfjahresbilanz der umgesetzten Umweltschutzbetrachtungen in der BASF AG in Ludwigshafen. So konnten in diesem Zeitraum von potentiellen 2 Mio t Abfall/a ca. 34% vermieden und vermindert, 51% stofflich und 11,5% energetisch verwertet werden, so dass nur noch ein geringer Anteil von 3,5%, entsprechend ca. 70000 t/a, umweltgerecht entsorgt werden musste. Dies fuehrte auch zu einer drastischen Reduktion der auf der Tonne Verkaufsprodukt bezogenen Menge an umweltbelastenden Stoffen von 40,6 kg im Jahre 1987 auf 6,7 kg im Jahre 1997. (orig.)

  18. Development and Field Trial of Dimpled-Tube Technology for Chemical Industry Process Heaters

    Energy Technology Data Exchange (ETDEWEB)

    Yaroslav Chudnovsky; Aleksandr Kozlov

    2006-10-12

    Most approaches to increasing heat transfer rates in the convection sections of gas-fired process heaters involve the incorporation of fins, baffles, turbulizers, etc. to increase either the heat transfer surface area or turbulence or both. Although these approaches are effective in increasing the heat transfer rates, this increase is invariably accompanied by an associated increase in convection section pressure drop as well as, for heaters firing ‘dirty’ fuel mixtures, increased fouling of the tubes – both of which are highly undesirable. GTI has identified an approach that will increase heat transfer rates without a significant increase in pressure drop or fouling rate. Compared to other types of heat transfer enhancement approaches, the proposed dimpled tube approach achieves very high heat transfer rates at the lowest pressure drops. Incorporating this approach into convection sections of chemical industry fired process heaters may increase energy efficiency by 3-5%. The energy efficiency increase will allow reducing firing rates to provide the required heating duty while reducing the emissions of CO2 and NOx.

  19. Chemical process control : present status and future needs ; the view from European industry

    OpenAIRE

    Schuler, Hans; Allgöwer, Frank; Gilles, Ernst Dieter

    1991-01-01

    Not only in Europe, chemical process control is characterized by a broad invasion of distributed control systems into chemical plants. The information integration from process control up to business management is a great challenge of today which follows from the overall computerization of production. Most of the recent progress in process automation results from the application of computer science paradigms to control systems, and of advanced developments in field instrumentation. Despite the...

  20. Evaluating exposures to complex mixtures of chemicals during a new production process in the plastics industry

    NARCIS (Netherlands)

    Meijster, T.; Burstyn, I.; Wendel de Joode, B. van; Posthumus, M.A.; Kromhout, H.

    2004-01-01

    The goal of this study was to monitor emission of chemicals at a factory where plastics products were fabricated by a new robotic (impregnated tape winding) production process. Stationary and personal air measurements were taken to determine which chemicals were released and at what concentrations.

  1. Integrated Environmental Risk Assessment and Whole-Process Management System in Chemical Industry Parks

    OpenAIRE

    Lei Huang; Meiting Ju; Juan Yang; Xiaogang Tian; Chaofeng Shao

    2013-01-01

    Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF) using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was develope...

  2. Integrated Environmental Risk Assessment and Whole-Process Management System in Chemical Industry Parks

    Directory of Open Access Journals (Sweden)

    Lei Huang

    2013-04-01

    Full Text Available Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was developed to determine risk-acceptable, risk-warning, and risk-mitigation zones, which can provide a risk source layout for chemical industry parks. In accordance with the environmental risk control requirements, this study focused on the three stages of control and management of environmental risk and established an environmental risk management system including risk source identification and assessment, environmental safety planning, early risk warning, emergency management, assessment of environmental effects, and environmental remediation of pollution accidents. By using this model, the environmental risks in Tianjin Binhai New Area, the largest chemical industry park in China, were assessed and the environmental risk zoning map was drawn, which suggested the existence of many unacceptable environmental risks in this area. Thus, relevant suggestions have been proposed from the perspective of the adjustment of risk source layout, intensified management of environmental risk control and so on.

  3. Integrated environmental risk assessment and whole-process management system in chemical industry parks.

    Science.gov (United States)

    Shao, Chaofeng; Yang, Juan; Tian, Xiaogang; Ju, Meiting; Huang, Lei

    2013-04-19

    Chemical industry parks in China are considered high-risk areas because they present numerous risks that can damage the environment, such as pollution incidents. In order to identify the environmental risks and the principal risk factors in these areas, we have developed a simple physical model of a regional environmental risk field (ERF) using existing dispersal patterns and migration models. The regional ERF zoning was also conducted and a reference value for diagnostic methods was developed to determine risk-acceptable, risk-warning, and risk-mitigation zones, which can provide a risk source layout for chemical industry parks. In accordance with the environmental risk control requirements, this study focused on the three stages of control and management of environmental risk and established an environmental risk management system including risk source identification and assessment, environmental safety planning, early risk warning, emergency management, assessment of environmental effects, and environmental remediation of pollution accidents. By using this model, the environmental risks in Tianjin Binhai New Area, the largest chemical industry park in China, were assessed and the environmental risk zoning map was drawn, which suggested the existence of many unacceptable environmental risks in this area. Thus, relevant suggestions have been proposed from the perspective of the adjustment of risk source layout, intensified management of environmental risk control and so on.

  4. Recent advances of pore system construction in zeolite-catalyzed chemical industry processes.

    Science.gov (United States)

    Shi, Jing; Wang, Yangdong; Yang, Weimin; Tang, Yi; Xie, Zaiku

    2015-12-21

    The kaleidoscopic applications of zeolite catalysts (zeo-catalysts) in petrochemical processes has been considered as one of the major accomplishments in recent decades. About twenty types of zeolite have been industrially applied so far, and their versatile porous architectures have contributed their most essential features to affect the catalytic efficiency. This review depicts the evolution of pore models in zeolite catalysts accompanied by the increase in industrial and environmental demands. The indispensable roles of modulating pore models are outlined for zeo-catalysts for the enhancement of their catalytic performances in various industrial processes. The zeolites and related industrial processes discussed range from the uni-modal micropore system of zeolite Y (12-ring micropore, 12-R) in fluid catalytic cracking (FCC), zeolite ZSM-5 (10-R) in xylene isomerization and SAPO-34 (8-R) in olefin production to the multi-modal micropore system of MCM-22 (10-R and 12-R pocket) in aromatic alkylation and the hierarchical pores in FCC and catalytic cracking of C4 olefins. The rational construction of pore models, especially hierarchical features, is highlighted with a careful classification from an industrial perspective accompanied by a detailed analysis of the theoretical mechanisms.

  5. Development and Scale Up Of a Chemical Process in Pharmaceutical Industry: A Case Study

    Directory of Open Access Journals (Sweden)

    Savita Belwal

    2016-07-01

    Full Text Available Every process has its own significance and one has to study factors which impact to the process and its procedure to be followed. This paper is more concerned of how a process is scaled up from lab scale to pilot plant scale, which is the major step in any industry because moving directly towards manufacturing level consumes time and money. The report introduces about pharmaceutical industry and how it is different from the other industries and provides firsthand experience for all the engineers to explore the equipment, process and unit operations included in it. First aspect of scale up is safety and then comes economy, purity and optimums. It includes the process and its unit operations such as reactors, distillation, filtration, crystallization, drying and the equipment involving these operations. Consequently, the scale up rules, factors influenced strategies and other considerations are observed. To learn and understand the unit process and operations with their importance, a case study taking one of the stages of production is discussed here

  6. Analysis and treatment of industrial wastewater through chemical coagulation-adsorption process-A case study of Clariant Pakistan limited

    Science.gov (United States)

    Ali Shah, Syed Farman; Shah, Abdul Karim; Mehdi, Ahmad; Memon, Aziza Aftab; Harijan, Khanji; Ali, Zeenat M.

    2012-05-01

    Textile dye manufacture processes are known as the most polluting chemical processes of industrial sectors of the world. Colored wastewaters along with many polluting agents are troublesome. They are heavily polluted with dyes, textile auxiliaries and chemicals. Current study applies a coupled technology for wastewater treatment. Combined coagulation-adsorption process was utilized for treatment of complex nature effluents of dyes, binder emulsion, pigments and textile chemicals plants at Clariant Pakistan. Cost effective coagulant and adsorbent was selected by using waste material from a power generation unit of Water and Power Development Authority (WAPDA), Pakistan. The treated effluent could be reused. Alum+ Activated Carbon, Ferrous sulfate+ Activated Carbon, Ferric chloride + Activated Carbon. Almost complete decolourization was achieved along with reduction in COD up to 65%. Pre and post treatment, TDS, COD, Turbidity and suspended solids were improved.

  7. Aspects of optical fibers and spectrometric sensors in chemical process and industrial environments

    International Nuclear Information System (INIS)

    For on-line control, the two alternatives of automatic sample transfer and in situ remote analysis are discussed. New concepts are emerging from the possibilities offered by optical fibers. Absorption in the visible, UV and IR, fluorescence and Raman spectrometric techniques are examined. The state of the art of optodes and devices in chemical process control are given, with some examples of applications in nuclear plants

  8. Conversion of bioprocess ethanol to industrial chemical products - Applications of process models for energy-economic assessments

    Science.gov (United States)

    Rohatgi, Naresh K.; Ingham, John D.

    1992-01-01

    An assessment approach for accurate evaluation of bioprocesses for large-scale production of industrial chemicals is presented. Detailed energy-economic assessments of a potential esterification process were performed, where ethanol vapor in the presence of water from a bioreactor is catalytically converted to ethyl acetate. Results show that such processes are likely to become more competitive as the cost of substrates decreases relative to petrolium costs. A commercial ASPEN process simulation provided a reasonably consistent comparison with energy economics calculated using JPL developed software. Detailed evaluations of the sensitivity of production cost to material costs and annual production rates are discussed.

  9. [AOX Pollution in Wastewater Treatment Process of Dyeing and Dyestuff Chemical Industries].

    Science.gov (United States)

    Shen, Yang-yang; Liu, Rui; Xu, Can-can; Shu, Xiao-ming; Xu, Jiang-jun; Lan, Ya-qiong; Chen, Lü-jun

    2015-09-01

    Selecting six large-scale dyeing factories and four large-scale dyestuff chemical factories in the well-developed Yangtze River Delta region, this study aimed to investigate the AOX pollution status in the raw wastewater as well as in the activated sludge treatment system. The components of AOX were characterized by GC-MS. Results showed that AOX concentration was low in wastewater from the six dyeing enterprises, ranging 0. 15-1. 62 mg.L-1 in the raw wastewater and 0. 06-1. 30 mg.L-1 in the biologically treated effluent. All the biologically treated effluent met the emission limits of 8 mg.L-1 in the Discharge Standard of Water Pollutants for Dyeing and Finishing of Textile Industry. Sludge in five factories with AOX was below 621 mg.kg-1, only one factory was with high AOX concentration of 3 280 mg.kg-1. By comparison, AOX concentration greatly varied between the wastewater from dyestuff chemical factories, was 1. 70 mg.L-1 to 78. 72 mg.L-1 in the raw wastewater and was 1. 88 mg.L-1 to 33. 11 mg.L-1 in the biologically treated effluent. AOX concentration in the activated sludge was as high as 960-2,297 mg.kg-1. Chlorobenzenes, chloronitrobenzenes, chloroanilines, chlorine nitroanilines and halophenols were typical TOX components detectable in the dyestuff chemical wastewater. Halophenols and chlorine nitroanilines could be efficiently removed. Single chloroanilines and single chloronitrobenzenes seemed to be easier removable than polychlorinated anilines and polychlorinated nitrobenzenes. Polychlorinated benzenes were also easily removal but the products chlorobenzene was hard to remove. PMID:26717692

  10. Chemical Process R&D for Pharmaceutical Industry in the New Millennium, Challenges and Opportunities

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Tony; Yantao

    2001-01-01

    The genomic revolution has offered scientists in the world with unprecedented number of targets and opportunities to eradicate human diseases. High throughput screening technology using enzymatic and receptor binding assays has shifted the bottleneck in drug discovery to the laboratories of chemistry. Recent upsurge of interest in combinatorial chemistry is a testimony to the urgency of increasing the efficiency of how drug-like molecules are made. What the implication of all these on chemical process research? If the Internet has revolutionized the distribution and of data, information, and knowledge, how can this powerful tool be utilized to harness the collective intellect of chemists all across the world? If the effort of a few thousands people was able to send men to the moon, can the cross-pollination of ideas from chemists all over the world, each of them thinking in his or her unique way, produce the most cost effective way of making a particular molecule, reduce pollution of a current process, or deliver a cure for cancer? We will examine the brief history of modern organic chemistry and provide some personal musings on different course one can take in the area of chemical process R&D.  ……

  11. Chemical Process R&D for Pharmaceutical Industry in the New Millennium, Challenges and Opportunities

    Institute of Scientific and Technical Information of China (English)

    ZHANG Tony Yantao; BINGHAM Alphus

    2001-01-01

    @@ The genomic revolution has offered scientists in the world with unprecedented number of targets and opportunities to eradicate human diseases. High throughput screening technology using enzymatic and receptor binding assays has shifted the bottleneck in drug discovery to the laboratories of chemistry. Recent upsurge of interest in combinatorial chemistry is a testimony to the urgency of increasing the efficiency of how drug-like molecules are made. What the implication of all these on chemical process research? If the Internet has revolutionized the distribution and of data, information, and knowledge, how can this powerful tool be utilized to harness the collective intellect of chemists all across the world? If the effort of a few thousands people was able to send men to the moon, can the cross-pollination of ideas from chemists all over the world, each of them thinking in his or her unique way, produce the most cost effective way of making a particular molecule, reduce pollution of a current process, or deliver a cure for cancer? We will examine the brief history of modern organic chemistry and provide some personal musings on different course one can take in the area of chemical process R&D.

  12. Sequential chemical-biological processes for the treatment of industrial wastewaters: review of recent progresses and critical assessment.

    Science.gov (United States)

    Guieysse, Benoit; Norvill, Zane N

    2014-02-28

    When direct wastewater biological treatment is unfeasible, a cost- and resource-efficient alternative to direct chemical treatment consists of combining biological treatment with a chemical pre-treatment aiming to convert the hazardous pollutants into more biodegradable compounds. Whereas the principles and advantages of sequential treatment have been demonstrated for a broad range of pollutants and process configurations, recent progresses (2011-present) in the field provide the basis for refining assessment of feasibility, costs, and environmental impacts. This paper thus reviews recent real wastewater demonstrations at pilot and full scale as well as new process configurations. It also discusses new insights on the potential impacts of microbial community dynamics on process feasibility, design and operation. Finally, it sheds light on a critical issue that has not yet been properly addressed in the field: integration requires complex and tailored optimization and, of paramount importance to full-scale application, is sensitive to uncertainty and variability in the inputs used for process design and operation. Future research is therefore critically needed to improve process control and better assess the real potential of sequential chemical-biological processes for industrial wastewater treatment.

  13. Evaluation Of Air Separator For Processing Particulate Chemical Industry Gas Streams

    Directory of Open Access Journals (Sweden)

    F. W. Ntengwe

    2015-08-01

    Full Text Available ABSTRACT The evaluations of an air separator for processing chemical engineering particulate gas streams was carried out with a view to investigate the performance for different flow rates and other characteristics. A louver LV air separator was used as a case study. The evaluations indicated that for various set points of characteristics the prediction of operating efficiencies could be made for different variations of louver gap LVG with area ratio AR length of separator at particular angles of LV inclination and the number of LV with flow rates. It was observed that efficiencies ranging from 40 to 60 on one hand were obtained for high values of LVG and gas flow rate. On the other hand efficiencies of 61 to 99 were obtained for lower values of LVG and gas flow rate. It was noted therefore that in order to produce high efficiencies the values of LVG and flow rates have to be low and vice versa. The evaluation indicates also that plant operators can quickly predict from the results the operating efficiency for the desired dimensions and or flow rates of particulate gas streams. The methodology for the determination of operating data can be used in minimum-time frame to optimize the operations of the plant.

  14. Characterization of chemical compounds for dosimetry of the radiation in industrial processes

    International Nuclear Information System (INIS)

    Different chemical compounds have been studied to optimize dosimetric systems in irradiation processes. In this study 2,3,5 Triphenyl -2H- Tetrazolium Chloride, Brilliant Cresyl Blue, Bromocresol Green and Potassium Nitrate were investigated for their merits or faults, for 60 Co gamma field, in order to verify if can be considered as dosimeters. Fricke solution was used as reference dosimeter to determine absorption dose rates at the gamma facilities.Only Bromocresol Green and Potassium Nitrate are recommended for dosimetry purposes since the main characteristics were achieved. The other two compounds could be used in dosimetry with changes in their formulation. Bromocresol Green and potassium Nitrate are reproducible and radiation sensitive for absorbed doses from 300 Gy to 150 kGy Bromocresol Green was used in liquid form and Potassium Nitrate was prepared in solid pellets form. Spectrophotometry in the visible region was used as the main detection technique, which allows relating optical absorption, before and after irradiation, with the absorbed dose. The maximum absorption wavelength for each compound was observed at 450-460nm for bromocresol Green and 546nm for Potassium Nitrate. Dose calibration curves are linear for both compounds in all dose intervals. When irradiated with accelerated electrons, with energies between o,9 MeV and 1,5MeV, optical absorption intensification, of about 2,6 times, was observed when comparing results for Potassium Nitrate, with those for gamma rays. All the evaluations are presented in this work. (author)

  15. Bioelectrochemical Integration of Waste Heat Recovery, Waste-to- Energy Conversion, and Waste-to-Chemical Conversion with Industrial Gas and Chemical Manufacturing Processes

    Energy Technology Data Exchange (ETDEWEB)

    Mac Dougall, James [Air Products and Chemicals, Inc., Allentown, PA (United States)

    2016-02-05

    Many U.S. manufacturing facilities generate unrecovered, low-grade waste heat, and also generate or are located near organic-content waste effluents. Bioelectrochemical systems, such as microbial fuel cells and microbial electrolysis cells, provide a means to convert organic-content effluents into electric power and useful chemical products. A novel biochemical electrical system for industrial manufacturing processes uniquely integrates both waste heat recovery and waste effluent conversion, thereby significantly reducing manufacturing energy requirements. This project will enable the further development of this technology so that it can be applied across a wide variety of US manufacturing segments, including the chemical, food, pharmaceutical, refinery, and pulp and paper industries. It is conservatively estimated that adoption of this technology could provide nearly 40 TBtu/yr of energy, or more than 1% of the U.S. total industrial electricity use, while reducing CO2 emissions by more than 6 million tons per year. Commercialization of this technology will make a significant contribution to DOE’s Industrial Technology Program goals for doubling energy efficiency and providing a more robust and competitive domestic manufacturing base.

  16. Chemical Industry Bandwidth Study

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2006-12-01

    The Chemical Bandwidth Study provides a snapshot of potentially recoverable energy losses during chemical manufacturing. The advantage of this study is the use of "exergy" analysis as a tool for pinpointing inefficiencies.

  17. The use of physico-chemical processes in order to achieve the required parameters of industrial wastewater before connecting to the municipal system

    OpenAIRE

    Miroševič, Samo

    2015-01-01

    The development of industrial facilities is causing increased discharge of industrial wastewater in municipal system. This represents a severe burden on the environment. Sustainable water management is so inevitable, that it is necessary to process polluted wastewater in a suitable treatment plant. The graduation thesis discusses an area of the physico-chemical treatment of industrial wastewater. Mentioned processes are used to ensure appropriate limit values for a connection to municipal sys...

  18. China's Chemical Pharmaceutical Industry Rebounding

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ After reorganization in 2006, China's chemical pharmaceutical industry began to pick up in 2007. According to the China Pharmaceutical Industry Association,China's chemical pharmaceutical industry achieved sales revenues of RMB202.5 billion in the first eight months this year, a growth of 24.6% - 5.6 percentage points faster than January to May this year. The net profit was RMB17.4 billion, an increase of 50.8% over the same period of 2006.

  19. Comparison the Physico-Chemical Model of Ferrosilicon Smelting Process with Results Observations of the Process under the Industrial Conditions

    Directory of Open Access Journals (Sweden)

    Machulec B.

    2016-03-01

    Full Text Available Based on the minimum Gibbs Free Enthalpy algorithm (FEM, model of the ferrosilicon smelting process has been presented. It is a system of two closed isothermal reactors: an upper one with a lower temperature T1, and a lower one with a higher temperature T2. Between the reactors and the environment as well as between the reactors inside the system, a periodical exchange of mass occurs at the moments when the equilibrium state is reached. The condensed products of chemical reactions move from the top to the bottom, and the gas phase components move in the opposite direction. It can be assumed that in the model, the Reactor 1 corresponds to the charge zone of submerged arc furnace where heat is released as a result of resistive heating, and the Reactor 2 corresponds to the zones of the furnace where heat is produced by electric arc. Using the model, a series of calculations was performed for the Fe-Si-O-C system and was determined the influence of temperatures T1, T2 on the process. The calculation results show a good agreement model with the real ferrosilicon process. It allows for the determination of the effects of temperature conditions in charge zones and arc zones of the ferrosilicon furnace on the carbothermic silica reduction process. This allows for an explanation of many characteristic states in the ferrosilicon smelting process.

  20. Radioactive tracer technique in process optimization: applications in the chemical industry

    International Nuclear Information System (INIS)

    Process optimization is concerned with the selection of the most appropriate technological design of the process and with controlling its operation to obtain maximum benefit. The role of radioactive tracers in process optimization is discussed and the various circumstances under which such techniques may be beneficially applied are identified. Case studies are presented which illustrate how radioisotopes may be used to monitor plant performance under dynamic conditions to improve production efficiency and to investigate the cause of production limitations. In addition, the use of sealed sources to provide information complementary to the tracer study is described. (author)

  1. Utilization of process heat from the HTR in the chemical and related industries

    International Nuclear Information System (INIS)

    The wide introduction of the HTRI as heat and energy sources would be beneficial when the HTRI operating parameters were more suitable for flexible adaptation to the wide possible field of applications and requirements of the potential customer. Here of importance are: Guaranteed reliable, easily adaptable as well as effective process heat provision; a small HTRI size, under 100 MW if possible, for economic process plant operation never negatively influenced by the operational behaviour of the individual HTRI; avoidance of a secondary heat transfer circulation system for economic reasons by an extremely clean primary helium at all times and under all circumstances; greater flexibility in the HTRI helium inlet and outlet temperatures. Initially at least a helium inlet temperature of 300deg C or better 350deg C. At 250deg C too much heat is often offered in the low-temperature range which can in the main be used for domestic heating and power export only. The processes technically and economically interesting which could be provided with heat from the HTRI cover the field of mineral oil technology. Their process temperatures are below 600deg C, a temperature range demanding conventional technology. Thus, for this purpose it is only necessary to: Test the heat exchangers to be designed new; find the most effective combined plant concept in each case; carry out the necessary safety examinations into the combined operation of the two plant sections - HTRI and process plant. In addition, the market for the process heat supply in mineral oil technology has a considerable potential. (orig./GL)

  2. Industrial processes influenced by gravity

    Science.gov (United States)

    Ostrach, Simon

    1988-01-01

    In considering new directions for low gravity research with particular regard to broadening the number and types of industrial involvements, it is noted that transport phenomena play a vital role in diverse processes in the chemical, pharmaceutical, food, and biotech industries. Relatively little attention has been given to the role of gravity in such processes. Accordingly, numerous industrial processes and phenomena are identified which involve gravity and/or surface tension forces. Phase separations and mixing are examples that will be significantly different in low gravity conditions. A basis is presented for expanding the scope of the low gravity research program and the potential benefits of such research is indicated.

  3. Waste processing and pollution in the chemical and petrochemical industries. 1978-June 1980 (citations from the NTIS Data Base). Report for 1978-June 1980

    Energy Technology Data Exchange (ETDEWEB)

    Cavagnaro, D.M.

    1980-07-01

    These citations from Federally funded research cover many aspects of waste processing and pollution in the chemical and petrochemical industries. The bibliography includes emissions, economics, control processes, pollution effects, and abatement strategies. (This updated bibliography contains 280 citations, 89 of which are new entries to the previous edition.)

  4. Wireless sensor networks in chemical industry

    International Nuclear Information System (INIS)

    Recent advances in wireless technology are a clear indication of the commercial promise of wireless networks. Industrial wireless sensing has now become more economical, efficient and secure as compared to traditional wired sensing. Wireless Sensor Networks (WSN) are successfully being used for process monitoring and control of many industrial plants. This paper explores how Chemical Industry in particular can benefit from the application of WSN technology. Various examples of successful implementation are cited. In order to address the industrial requirements, we propose a low power and low cost solution for process monitoring by implementing WSN. (author)

  5. Assessment of the toxicity of wastewater from the metalworking industry treated using a conventional physico-chemical process.

    Science.gov (United States)

    Machado, Rodrigo Matuella; Monteggia, Luiz Olinto; Arenzon, Alexandre; Curia, Ana Cristina

    2016-06-01

    This article presents results from a toxicity reduction evaluation program intended to describe wastewater from the metalworking industry that was treated using a conventional physico-chemical process. The toxicity of the wastewater for the microcrustacean Daphnia magna was predominantly expressive. Alkaline cyanide wastewater generated from electroplating accounted for the largest number of samples with expressive toxicity. When the raw wastewater concentrations in the batches were repeated, inexpressive toxicity variations were observed more frequently among the coagulated-flocculated samples. At the coagulation-flocculation step, 22.2 % of the treatments had reduced acute toxicity, 30.6 % showed increased toxicity, and 47.2 % remained unchanged. The conductivity and total dissolved solids contents of the wastewater indicated the presence of salts with charges that were inappropriate for the survival of daphnid. The wastewaters treated by neutralization and coagulation-flocculation had average metallic compound contents that were greater than the reference toxic concentrations reported in other studies, suggesting that metals likely contributed to the toxic effects of the wastewater on freshwater microcrustaceans. Thus, alternative coagulants and flocculants should be assessed, and feasible doses should be determined to improve wastewater treatment. In addition, advanced treatment processes should be assessed for their abilities to remove dissolved toxic salts and ions. PMID:27230425

  6. Radiation in industrial processes

    International Nuclear Information System (INIS)

    The uses of ionizing radiation can be divided into two broad categories. First, it can be used as a tool of investigation, measurement and testing, and secondly, it can be a direct agent in inducing chemical processes. For example, radiation can help in the detecting and locating of malignant tumours, and it can be employed also for the destruction of those tumours. Again, it can reveal intricate processes of plant growth and, at the same time, can initiate certain processes which result in the growth of new varieties of plants. Similarly in industry, radiation is both a tool of detection, testing and measurement and an active agent for the initiation of useful chemical reactions. The initiation of chemical reactions usually requires larger and more powerful sources of radiation. Such radiation can be provided by substances like cobalt 60 and caesium 137 or by machines which accelerate nuclear particles to very high energies. Of the particle-accelerating machines, the most useful in this field are those which accelerate electrons to energies considerably higher than those possessed by the electrons (beta particles) emitted by radioactive substances. These high-energy radiations produce interesting reactions both in organic life and in materials for industry. Several of the papers presented at the Warsaw conference were devoted to the application of ionizing radiation to polymerization and other useful reactions in the manufacture and treatment of plastics. The polymerization of the ethylene series of hydro-carbons was discussed from various angles and the technical characteristics and requirements were described. It was pointed out by some experts that the cross-linking effect of radiation resulted in a superior product, opening the way to new applications of polyethylene. Irradiated polyethylene film has been sold for several years, and electrical wire has been made with irradiated polyethylene as the insulating jacket. Other reactions discussed included the cross

  7. Continuous intensified separations for the chemicals industry

    NARCIS (Netherlands)

    Ngene, I.S.; Roelands, C.P.M.

    2012-01-01

    Today, a lot of effort is going into intensifying reactions within the chemicals industry. Intensified processes are expected to delìver significant improvements in manufacturing processes, reducing equipment size and waste streams and increasing product yields and thereby delivering more sustainabl

  8. Chemical sensors for nuclear industry

    International Nuclear Information System (INIS)

    Development of chemical sensors for detection of gases at trace levels for applications in nuclear industry will be highlighted. The sensors have to be highly sensitive, reliable and rugged with long term stability to operate in harsh industrial environment. Semiconductor and solid electrolyte based electrochemical sensors satisfy the requirements. Physico-chemical aspects underlying the development of H2 sensors in sodium and in cover gas circuit of the Fast breeder reactors for its smooth functioning, NH3 and H2S sensors for use in Heavy water production industries and NOx sensors for spent fuel reprocessing plants will be presented. Development of oxygen sensors to monitor the oxygen level in the reactor containments and sodium sensors for detection of sodium leakages will also be discussed. The talk will focus the general aspects of identification of the sensing material for the respective analyte species, development of suitable chemical route for preparing them as fine powders, the need for configuring them in thick film or thin film geometries and their performance. Pulsed laser deposition method, an elegant technique to prepare the high quality thin films of multicomponent oxides is demonstrated for preparation of nanostructured thin films of complex oxides and its use in tailoring the morphology of the complex sensing material in the desired form by optimizing the in-situ growth conditions. (author)

  9. Solar industrial process heat

    Energy Technology Data Exchange (ETDEWEB)

    Lumsdaine, E.

    1981-04-01

    The aim of the assessment reported is to candidly examine the contribution that solar industrial process heat (SIPH) is realistically able to make in the near and long-term energy futures of the United States. The performance history of government and privately funded SIPH demonstration programs, 15 of which are briefly summarized, and the present status of SIPH technology are discussed. The technical and performance characteristics of solar industrial process heat plants and equipment are reviewed, as well as evaluating how the operating experience of over a dozen SIPH demonstration projects is influencing institutional acceptance and economoc projections. Implications for domestic energy policy and international implications are briefly discussed. (LEW)

  10. Significant Breakthrough in Industrial Test of the "Methanol to Olefins" Process Developed by Dalian Institute of Chemical Physics, Chinese Academy of Sciences

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ A process of "Methanol or Dimethylether to Olefins" developed by Dalian Institute of Chemical Physics (DICP), designated as the DMTO process, has attained great success in industrial scaling up testing. DICP, by collaborating with the Xinxing Coal Chemical Co., Ltd. of Shaanxi Province and the Luoyang Petrochemical Engineering Co. of the SINOPEC Group, operated successfully a 50t(methanol)/d unit for the conversion of methanol to lower olefins, with a methanol conversion of close to 100%, and a selectivity to lower olefins(ethylene, propylene and butylenes) of higher than 90%. On 23rd August, the industrial test project has passed a state appraisal. The experts of the Appraisal Group, headed by Prof.

  11. Research and chemical industry in 90's

    International Nuclear Information System (INIS)

    This paper examines the importance of research with respect to changes taking place within the chemical industry. Specific areas having a significant impact on the future evolution of the industry are identified. The chemical industry is highly R ampersand D intensive with respect to its overall sales volume, as well as, to R ampersand D levels in other industries; and R ampersand D has been a dominant factor influencing the restructuring, on a global scale, of this industry. In the 90's, the industry is expected to have a supply model which is based on the production of marketable high-technology products and integrated systems, developed through coordinated research in multi-disciplinary scientific fields. The optimum strategic and organizational strategies which are to be adopted by the industry during this decade are discussed with reference to the directions being taken by a large multi-national firm in developing strategies in various areas, e.g., new prime materials, environmental protection, pharmacology, and biotechnology. A look is given at recent developments in the sector of advanced polymers, with attention given to processes involving polymer genetics, new products with a wide range of applications and those offering a high level of environmental compatibility. A review of new materials development includes an assessment of prospects for biodegradable plastics based on natural carbohydrates

  12. Controle químico da mancha-bacteriana do tomate para processamento industrial em campo Field chemical control of bacterial spot on tomato for industrial processing

    Directory of Open Access Journals (Sweden)

    Abadia dos R Nascimento

    2013-03-01

    cloretos de benzalcônio. ASM e famoxadona + mancozebe foram os que promoveram uma relação benefício/custo superior a 1.In order to evaluate chemical control of bacterial spot on tomato for industrial processing, two field trials were carried out at the Unilever Bestfoods experimental station, in Goiânia, Goias state, Brazil. The first trial was in a randomized complete block design, with 15 treatments and three replications, using the hybrid Heinz 9992 inoculated with Xanthomonas perforans. The second trial was in a split-plot randomized complete block design with chemical foliar applications (10 treatments and hybrids (Hypeel 108 and U2006 as factors. Plants were inoculated with X. perforans and X. gardneri. In both trials the chemicals, in different number of applications and combinations, were: acibenzolar-S-methyl (ASM; famoxadone + mancozeb; metiram + pyraclostrobin; phosphite PK; benzalkonium chlorides; cuprous oxide, and copper hydroxide (SC, WP and WG. For both trials, disease severity on leaves, number of fruits with symptoms and yield were evaluated. In the second one, sunscald was also evaluated. For the first trial, significant severity differences (p>0.05 among treatments were observed only in the first two evaluations, but none of them differed from the water check control. In the second trial, significant differences were detected only in foliar severity in first evaluation for hybrids. For number of fruits with symptoms and sunscald, besides hybrids, interaction among factors was also significant. 'U2006' was more resistant than 'Hypeel 108', which also had highest sunscald values, but concerning fruits with symptoms, the opposite was observed. The two factors were significant for yield data, 'U2006' yielded better than 'Hypeel 108'. Despite none of the treatments have differed in yield from the water control, famoxadone + mancozeb, which resulted in the highest yield, differed from copper hydroxide, ASM - famoxadone + mancozeb, and benzalkonium

  13. 化学工业发展与化工过程强化的内在关系分析%Development of Chemical Industry and Chemical Process Intensification of Internal Relation

    Institute of Scientific and Technical Information of China (English)

    肖素光

    2013-01-01

    In recent years, with the in-depth study of chemistry, chemical industry has been rapid development of fast. Chemical industry in today's society applications continue to increase, is the development of future society mainstream industry. Industry development in addition to technical theory support, the production process is also very important. However, with the current environmental protection and energy saving of the mainstream of the world, the development of chemical industry still faces a challenge. The intensification of chemical engineering process, to a certain extent in the solution of chemical industry of high pollution, high energy consumption, high material consumption and abuse. Therefore, for the development of chemical industry, chemical process intensification will play a very big role in promoting. This article will focus on development of chemical industry and chemical strengthening inner relationship.%近年来,随着化学研究的不断深入,化学工业得以快速迅猛的发展。化学工业在当今社会应用领域不断加大,是未来社会发展的主流工业。行业发展除了需要技术理论的支持,对于其生产加工过程也是非常重要的。但是,伴随着当前环保节能的世界主流,化学工业发展还是面临着一定的挑战。化工过程强化,能够在一定程度上解决化学工业中高污染、高能耗以及高物耗等弊端。因此,对于化学工业发展而言,化工过程强化必然会起到非常大的推动作用。文章就将重点谈论化学工业发展与化工强化的内在关系。

  14. Application of chemical, biological and membrane separation processes in textile industry with recourse to zero effluent discharge--a case study.

    Science.gov (United States)

    Nandy, T; Dhodapkar, R S; Pophali, G R; Kaul, S N; Devotta, S

    2005-09-01

    Environmental concerns associated with textile processing had placed the textile sector in a Southern State of India under serious threat of survival. The textile industries were closed under the orders of the Statutory Board for reason of inadequate compliance to environmental discharge norms of the State for the protection of the drinking water source of the State capital. In compliance with the direction of the Board for zero effluent discharge, advanced treatment process have been implemented for recovery of boiler feed quality water with recourse to effluent recycling/reuse. The paper describes to a case study on the adequacy assessment of the full scale effluent treatment plant comprising chemical, biological and filtration processes in a small scale textile industry. In addition, implementation of measures for discernable improvement in the performance of the existing units through effective operation & maintenance, and application of membrane separation processes leading to zero effluent discharge is also highlighted. PMID:16196413

  15. Chemical process hazards analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The Office of Worker Health and Safety (EH-5) under the Assistant Secretary for the Environment, Safety and Health of the US Department (DOE) has published two handbooks for use by DOE contractors managing facilities and processes covered by the Occupational Safety and Health Administration (OSHA) Rule for Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119), herein referred to as the PSM Rule. The PSM Rule contains an integrated set of chemical process safety management elements designed to prevent chemical releases that can lead to catastrophic fires, explosions, or toxic exposures. The purpose of the two handbooks, ``Process Safety Management for Highly Hazardous Chemicals`` and ``Chemical Process Hazards Analysis,`` is to facilitate implementation of the provisions of the PSM Rule within the DOE. The purpose of this handbook ``Chemical Process Hazards Analysis,`` is to facilitate, within the DOE, the performance of chemical process hazards analyses (PrHAs) as required under the PSM Rule. It provides basic information for the performance of PrHAs, and should not be considered a complete resource on PrHA methods. Likewise, to determine if a facility is covered by the PSM rule, the reader should refer to the handbook, ``Process Safety Management for Highly Hazardous Chemicals`` (DOE- HDBK-1101-96). Promulgation of the PSM Rule has heightened the awareness of chemical safety management issues within the DOE. This handbook is intended for use by DOE facilities and processes covered by the PSM rule to facilitate contractor implementation of the PrHA element of the PSM Rule. However, contractors whose facilities and processes not covered by the PSM Rule may also use this handbook as a basis for conducting process hazards analyses as part of their good management practices. This handbook explains the minimum requirements for PrHAs outlined in the PSM Rule. Nowhere have requirements been added beyond what is specifically required by the rule.

  16. Industrial best practices of conceptual process design

    NARCIS (Netherlands)

    Harmsen, G.J.

    2004-01-01

    The chemical process industry aims particularly at energy, capital expenditure and variable feedstock cost savings due to fierce global competition, the Kyoto Protocol and requirements for sustainable development. Increasingly conceptual process design methods are used in the industry to achieve the

  17. Chemical fractionation and speciation modelling for optimization of ion-exchange processes to recover palladium from industrial wastewater.

    Science.gov (United States)

    Folens, K; Van Hulle, S; Vanhaecke, F; Du Laing, G

    2016-01-01

    Palladium is used in several industrial applications and, given its high intrinsic value, intense efforts are made to recover the element. In this hydrometallurgic perspective, ion-exchange (IEX) technologies are principal means. Yet, without incorporating the chemical and physical properties of the Pd present in real, plant-specific conditions, the recovery cannot reach its technical nor economic optimum. This study characterized a relevant Pd-containing waste stream of a mirror manufacturer to provide input for a speciation model, predicting the Pd speciation as a function of pH and chloride concentration. Besides the administered neutral PdCl2 form, both positively and negatively charged [PdCln](2-n) species occur depending on the chloride concentration in solution. Purolite C100 and Relite 2AS IEX resins were selected and applied in combination with other treatment steps to optimize the Pd recovery. A combination of the cation and anion exchange resins was found successful to quantitatively recover Pd. Given the fact that Pd was also primarily associated with particles, laboratory-scale experiments focused on physical removal of the Pd-containing flow were conducted, which showed that particle-bound Pd can already be removed by physical pre-treatment prior to IEX, while the ionic fraction remains fully susceptible to the IEX mechanism.

  18. Nuclear industry - challenges in chemical engineering

    International Nuclear Information System (INIS)

    Chemical engineering processes and operations are closely involved in every step of the nuclear fuel cycle. Starting from mining and milling of the ore through the production of fuel and other materials and their use in nuclear reactors, fuel reprocessing, fissile material recycle and treatment and disposal of fission product wastes, each step presents a challenge to the chemical engineer to evolve and innovate processes and techniques for more efficient utilization of the energy in the atom. The requirement of high recovery of the desired components at high purity levels is in itself a challenge. ''Nuclear Grade'' specifications for materials put a requirement which very few industries can satisfy. Recovery of uranium and thorium from low grade ores, of heavy water from raw water, etc. are examples. Economical and large scale separation of isotopes particularly those of heavy elements is a task for which processess are under various stages of development. Further design of chemical plants such as fuel reprocessing plants and high level waste treatment plants, which are to be operated and maintained remotely due to the high levels of radio-activity call for engineering skills which are being continually evolved. In the reactor, analysis of the fluid mechanics and optimum design of heat removal system are other examples where a chemical engineer can play a useful role. In addition to the above, the activities in the nuclear industry cover a very wide range of chemical engineering applications, such as desalination and other energy intensive processes, radioisotope and radiation applications in industry, medicine and agriculture. (auth.)

  19. EDITORIAL: Industrial Process Tomography

    Science.gov (United States)

    West, Robert M.

    2004-07-01

    Industrial process tomography remains a multidisciplinary field with considerable interest for many varied participants. Indeed this adds greatly to its appeal. It is a pleasure and a privilege to once again act as guest editor for a special feature issue of Measurement Science and Technology on industrial process tomography, the last being in December 2002. Those involved in the subject appreciate the efforts of Measurement Science and Technology in producing another issue and I thank the journal on their behalf. It can be seen that there are considerable differences in the composition of material covered in this issue compared with previous publications. The dominance of electrical impedance and electrical capacitance techniques is reduced and there is increased emphasis on general utility of tomographic methods. This is encompassed in the papers of Hoyle and Jia (visualization) and Dierick et al (Octopus). Electrical capacitance tomography has been a core modality for industrial applications. This issue includes new work in two very interesting aspects of image reconstruction: pattern matching (Takei and Saito) and simulated annealing (Ortiz-Aleman et al). It is important to take advantage of knowledge of the process such as the presence of only two components, and then to have robust reconstruction methods provided by pattern matching and by simulated annealing. Although crude reconstruction methods such as approximation by linear back projection were utilized for initial work on electrical impedance tomography, the techniques published here are much more advanced. The paper by Kim et al includes modelling of a two-component system permitting an adaption-related approach; the paper by Tossavainen et al models free surface boundaries to enable the estimation of shapes of objects within the target. There are clear improvements on the previous crude and blurred reconstructions where boundaries were merely inferred rather than estimated as in these new developments

  20. Pollutant removal from industrial discharge water using individual and combined effects of adsorption and ion-exchange processes: Chemical abatement

    Directory of Open Access Journals (Sweden)

    Jérémie Charles

    2016-03-01

    Full Text Available In this study, adsorption-oriented processes for pollutant removal from metal polycontaminated surface-finishing discharge water were applied individually as well as in combination with ion-exchange treatment to remove the remaining metal ions and organic load. Several materials were compared using batch experiments, namely an activated carbon, three ion-exchange resins (IRA 402Cl, IR 120H and TP 207, and two non-conventional cross-linked polysaccharide-based biosorbents (starch and cyclodextrin. This article presents the abatements obtained in chemical pollution as monitored by complete chemical analysis. For the same experimental conditions (similar discharge water, pollutant concentrations, stirring rate, contact time, and initial pH, the highest levels of pollutant removal were attained with the combined use of two materials, an activated carbon and a mixture of two ion-exchange resins. This physicochemical treatment effectively lowered the main pollutants present in the discharge water such as Cu, Ni and COD, by more than 96%, 79% and 74% respectively (average values for three samples, while the treatment with carbon alone lowered them by 58%, 9% and 70%, and resins alone by 85%, 61% and 16%. Similar interesting results were obtained with the cyclodextrin-based adsorbent and its use alone was sufficient to obtain decreases in Cu, Ni and COD of more than 94%, 77% and 67% respectively. The adsorption-oriented process using cyclodextrin polymer could be an advantageous approach for removing organic and metallic pollutants from metal surface-finishing discharge water due to the non-toxic character of CD to humans and the environment.

  1. Using game theory to improve safety within chemical industrial parks

    CERN Document Server

    Reniers, Genserik

    2013-01-01

    Though the game-theoretic approach has been vastly studied and utilized in relation to economics of industrial organizations, it has hardly been used to tackle safety management in multi-plant chemical industrial settings. Using Game Theory for Improving Safety within Chemical Industrial Parks presents an in-depth discussion of game-theoretic modelling which may be applied to improve cross-company prevention and -safety management in a chemical industrial park.   By systematically analyzing game-theoretic models and approaches in relation to managing safety in chemical industrial parks, Using Game Theory for Improving Safety within Chemical Industrial Parks explores the ways game theory can predict the outcome of complex strategic investment decision making processes involving several adjacent chemical plants. A number of game-theoretic decision models are discussed to provide strategic tools for decision-making situations.   Offering clear and straightforward explanations of methodologies, Using Game Theor...

  2. Vacuum technology in the chemical industry

    CERN Document Server

    Jorisch, Wolfgang

    2015-01-01

    Based on the very successful German edition and a seminar held by the German Engineers` Association (VDI) on a regular basis for years now, this English edition has been thoroughly updated and revised to reflect the latest developments. It supplies in particular the special aspects of vacuum technology, applied vacuum pump types and vacuum engineering in the chemical, pharmaceutical and process industry application-segments. The text includes chapters dedicated to latest European regulations for operating in hazardous zones with vacuum systems, methods for process pressure control and regulati

  3. Processo químico industrial de extração de óleo vegetal: um experimento de química geral Chemical industrial process of vegetable oil extraction: an experiment for teaching general chemistry

    Directory of Open Access Journals (Sweden)

    José Francisco Vianna

    1999-09-01

    Full Text Available In this study we describe an experimental procedure based on a chemical industrial process of soya-bean oil extraction applied in general chemistry for undergraduate students. The experiment was planned according to the Science, Technology and Society (STS approach to teach basic chemical concepts and provide grounding in the management of environmental care. The use of real life chemistry problems seems to salient the relevance of chemistry to our students and enhances their motivation to learn both the practical and theoretical components of the discipline.

  4. Economic Aspects of the Chemical Industry

    Science.gov (United States)

    Koleske, Joseph V.

    Within the formal disciplines of science at traditional universities, through the years, chemistry has grown to have a unique status because of its close correspondence with an industry and with a branch of engineering—the chemical industry and chemical engineering. There is no biology industry, but aspects of biology have closely related disciplines such as fish raising and other aquaculture, animal cloning and other facets of agriculture, ethical drugs of pharmaceutical manufacture, genomics, water quality and conservation, and the like. Although there is no physics industry, there are power generation, electricity, computers, optics, magnetic media, and electronics that exist as industries. However, in the case of chemistry, there is a named industry. This unusual correspondence no doubt came about because in the chemical industry one makes things from raw materials—chemicals—and the science, manufacture, and use of chemicals grew up together during the past century or so.

  5. Better Tomorrow of China Rubber Chemicals Industry

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    I. Development of China Rubber Chemicals Industry During the "11th Five-Year Plan" period, China rubber Chemicals industry fully implemented the development guideline of "Adhering to science and technology development, developing green chemistry with environmental protection, safety and energy conservation as the core, and building enterprise and world brands". With the great support of the state,

  6. New Prospects for Chemical Fiber industry

    Institute of Scientific and Technical Information of China (English)

    Zhao Zihan

    2012-01-01

    The 12th five years' planning is thoroughly implemented this year, chemical fiber industry in our country including the standardization work, fast and efficiently developing, and achieving a number of significant gains, which contribute significantly to the prosperity of economic in nation, industry and location, as well as the economic revival of the global industrial chain.

  7. Methods in industrial biotechnology for chemical engineers

    CERN Document Server

    Kandasamy, W B Vasantha

    2008-01-01

    In keeping with the definition that biotechnology is really no more than a name given to a set of techniques and processes, the authors apply some set of fuzzy techniques to chemical industry problems such as finding the proper proportion of raw mix to control pollution, to study flow rates, to find out the better quality of products. We use fuzzy control theory, fuzzy neural networks, fuzzy relational equations, genetic algorithms to these problems for solutions. When the solution to the problem can have certain concepts or attributes as indeterminate, the only model that can tackle such a situation is the neutrosophic model. The authors have also used these models in this book to study the use of biotechnology in chemical industries. This book has six chapters. First chapter gives a brief description of biotechnology. Second chapter deals will proper proportion of mix of raw materials in cement industries to minimize pollution using fuzzy control theory. Chapter three gives the method of determination of te...

  8. Sustainable Development in Chemical Fiber Industry

    Institute of Scientific and Technical Information of China (English)

    Flora Zhao

    2012-01-01

    The 18th China International Man-Made Fiber Conference (Xiaoshan 2012), themed on "How does Chemical Fiber Industry to Realize Sustainable Development against the Background of High-cost Era?", kicked off in Hangzhou on September 6th, 2012. More than 600 representatives from nearly 20 major chemical fiber manufacturing countries and regions all over the world were gathered together to discuss the sustainable development strategies of international chemical fiber industry in the context of the current compficated environment from different perspectives.

  9. Lasers in chemical processing

    International Nuclear Information System (INIS)

    The high cost of laser energy is the crucial issue in any potential laser-processing application. It is expensive relative to other forms of energy and to most bulk chemicals. We show those factors that have previously frustrated attempts to find commercially viable laser-induced processes for the production of materials. Having identified the general criteria to be satisfied by an economically successful laser process and shown how these imply the laser-system requirements, we present a status report on the uranium laser isotope separation (LIS) program at the Lawrence Livermore National Laboratory

  10. ANALYTICAL REPRESENTATION OF INDUSTRIAL PROCESSES

    Directory of Open Access Journals (Sweden)

    T. I. Chepeleva

    2009-01-01

    Full Text Available Investigation of mathematical models and problems of optimum industrial process has been carried out with the help of operational calculus theory, impulse function theory, set theory, time-tables, combinatory optimization. Analytical expressions describing discontinuous industrial process have been obtained and their geometrical interpretation is also given in the paper.

  11. Beyond petrochemicals: The renewable chemicals industry

    DEFF Research Database (Denmark)

    Vennestrøm, P.N.R.; Osmundsen, Christian Mårup; Christensen, C.H.;

    2011-01-01

    From petroleum to bioleum: Since biomass is a limited resource, it is necessary to consider its best use. The production of select chemicals from biomass, rather than its use as fuel, could effectively replace the use of petroleum in the chemical industry, but the inherent functionality of biomass...

  12. The modern alchemy: The chemical industry

    International Nuclear Information System (INIS)

    A brief history is presented on the development of chemistry from the antiquity, through alchemy, iatrochemistry, electrochemistry, atomic theory and the XVII, XVIII, XIX and X X centuries discoveries up to modern chemistry, fine chemistry, chemical engineering and the modern chemical industry with all of its consequences

  13. Hygienic Design in the Food Processing Industry

    DEFF Research Database (Denmark)

    Hilbert, Lisbeth Rischel; Hjelm, M.

    2001-01-01

    Bacterial adhesion and biofilm formation are of major concern in food production and processing industry. In 1998 a Danish co-operation programme under the title Centre for Hygienic Design was funded to combine the skills of universities, research institutes and industry to focus on the following...... with cleaning chemicals and cleaning procedures • Optimising design of production equipment • Development of environmentally friendly cleaning procedures for removal of biofilm The partners include food production/processing companies and producers of equipment for the food industry, cleaning chemicals...... approach is to focus on surface material hygienic lifetime. Test of this is made in an industrial test loop run by biotechnology researchers in co-operation with materials producers and a food producer to compare biofilm formation, cleanability and deterioration of different rubber and plastic materials...

  14. Renewable raw materials new feedstocks for the chemical industry

    CERN Document Server

    Ulber, Roland; Hirth, Thomas

    2011-01-01

    One of the main challenges facing the chemical industry is the transition to sustainable operations. Industries are taking initiatives to reduce resource intensities or footprints, and by adopting safer materials and processes. Such efforts need to be supported by techniques that can quantify the broad economic and environmental implications of industrial operations, retrofi t options and provide new design alternatives. This contemporary overview focuses on cradle-to-grave life cycle assessments of existing or conceptual processes for producing valueadded fuels, chemicals, and/or material

  15. Treatment of wastewater from a low-temperature carbonization process industry through biological and chemical oxidation processes for recycle/reuse: a case study.

    Science.gov (United States)

    Biswas, R; Bagchi, S; Urewar, C; Gupta, D; Nandy, T

    2010-01-01

    Low-temperature carbonization (LTC) of coal generates highly complex wastewater warranting stringent treatment. Developing a techno-economically viable treatment facility for such wastewaters is a challenging task. The paper discusses a case study pertaining to an existing non-performing effluent treatment plant (ETP). The existing ETP comprising an ammonia stripper followed by a single stage biological oxidation was unable to treat 1,050 m(3)/d of effluent as per the stipulated discharge norms. The treated effluent from the existing ETP was characterized with high concentrations of ammonia (75-345 mg N/l), COD (313-1,422 mg/l) and cyanide (0.5-4 mg/l). Studies were undertaken to facilitate recycling/reuse of the treated effluent within the plant. A second stage biooxidation process was investigated at pilot scale for the treatment of the effluent from the ETP. This was further subjected to tertiary treatment with 0.5% dose of 4% hypochlorite which resulted in effluent with pH: 6.6-6.8, COD: 73-121 mg/l, and BOD(5):recycle and reuse. Thus, a modified treatment scheme comprising ammonia pre-stripping followed by two-stage biooxidation process and a chemical oxidation step with hypochlorite at tertiary stage was proposed for recycle/reuse of LTC wastewater.

  16. Design of Industrial Quenching Processes

    Institute of Scientific and Technical Information of China (English)

    Nikolai. I. KOBASKO; George .E. TOTTEN

    2004-01-01

    The method of designing industrial processes of quench cooling, in particular, the speed of the conveyor movement with regard to shape and sizes of parts to be quenched, thermal and physical properties of material and cooling capacity of quenchants has been developed. The suggested designing method and databases are the basis for the complete automation of industrial processes of quench cooling, especially for continuous conveyor lines, with the purpose of making high-strength materials. The process is controlled by infrared technique.

  17. 多变量统计过程监控:进展及其在化学工业的应用%Multivariate Statistical Process Monitoring and Control: Recent Developments and Applications to Chemical Industry

    Institute of Scientific and Technical Information of China (English)

    梁军; 钱积新

    2003-01-01

    Multivariate statistical process monitoring and control (MSPM&C) methods for chemical process monitoring with statistical projection techniques such as principal component analysis (PCA) and partial least squares (PLS) are surveyed in this paper. The four-step procedure of performing MSPM&C for chemical process, modeling of processes, detecting abnormal events or faults, identifying the variable(s) responsible for the faults and diagnosing the source cause for the abnormal behavior, is analyzed. Several main research directions of MSPM&C reported in the literature are discussed, such as multi-way principal component analysis (MPCA) for batch process, statistical monitoring and control for nonlinear process, dynamic PCA and dynamic PLS, and on-line quality control by inferential models. Industrial applications of MSPM&C to several typical chemical processes, such as chemical reactor, distillation column, polymerization process, petroleum refinery units, are summarized. Finally, some concluding remarks and future considerations are made.

  18. Caracterização físico-química da erva mate: influência das etapas do processamento industrial Effects of industrial processing steps on the physico-chemical characteristics of mate tea leaves

    Directory of Open Access Journals (Sweden)

    Maria Carolina Esmelindro

    2002-08-01

    Full Text Available A erva-mate é uma matéria-prima de grande importância para a região Sul do Brasil, sendo que a produção anual é de aproximadamente 650.000 toneladas de folhas. Atualmente, problemas com o excesso de oferta têm incentivado pesquisadores e empresários a buscar alternativas para a utilização da erva-mate como matéria-prima para o desenvolvimento de novos produtos bem como promover melhorias no processamento industrial visando a obtenção de características organolépticas desejáveis. Neste sentido, o presente trabalho teve por objetivo realizar a caracterização físico-química da erva-mate em função das etapas do processamento industrial (sapeco, secagem e tempo de cancheamento e verificar como estas etapas influem nos teores de cinzas, fibras, gorduras, proteínas, glicose, sacarose e cafeína presentes na matéria-prima. Os resultados obtidos permitiram verificar que as etapas do processamento industrial influem diretamente nos teores dos compostos citados, mostrando a relevância em se analisar estes resultados quando o objetivo é utilizar esta matéria-prima para o desenvolvimento de novos produtos alimentícios que podem exigir características específicas.Mate tea leaves is a raw material of great importance to Southern Brazil, considering its annual production of approximately 650,000 tons of leaves. Currently the excess of mate tea leaves supply in the market has encouraged researchers and entrepreneurs to search for alternatives involving the application of this raw material in the development of new products, as well as the improvement the industrial process, seeking to obtain desirable organoleptic properties. Thus, the present work performed the physical-chemical characterization of mate tea leaves, correlating its qualities to the industrial processing steps ("sapeco", drying and time of "cancheamento". The effect of these steps on the content of ash, fiber, fat, protein, glucose, sucrose and caffeine in the raw

  19. COD Removal of Different Industrial Wastewater by Fenton Oxidation Process

    OpenAIRE

    Yogita Sindhi*1

    2014-01-01

    Advanced oxidation processes are possibly one of the most effective methods for the treatment of wastewater containing organic products (effluents from chemical and agrochemical industries, the textile industry, paints, dyes, etc.).Fenton process is a one of advanced oxidation process. Fenton’s process have been extensively used for the removal of COD, TOC, dyes, phenolic compounds other organic chemicals from industrial and municipal wastewater. In this study, the laboratory s...

  20. The chemical industry - friend to the environment?

    International Nuclear Information System (INIS)

    ''The Chemical Industry - Friend to the Environment?'' was a symposium organised by the North East Region committee of the Industrial Division of the Royal Society of Chemistry. This volume contains typescripts from all the lectures given at the symposium. The general public appreciate the material comforts the Chemical Industry provides, for example textiles, ceramics, steel, speciality chemicals, drugs, prosthetics etc. However, for many their comfort is spoiled by the chemical poisoning of the environment through slag heaps, beaches and countryside littered with non-biodegradable unsightly plastic containers, poor air quality through NOx, CO2 and chlorofluorocarbon emissions, and of course, nuclear waste. The occasional spillage of hazardous chemicals through road, rail and sea accidents do nothing to improve the Industry's image. The majority of these topics were discussed, though no one presumed to know how to remove the problems entirely but many suggestions were put forward as to how this might be achieved. Of the 13 papers presented three were specifically concerned with recycling of plastics, 9 with the environmental impacts of chemicals and one, which is indexed separately, was concerned with radioactive discharges into the environment from the Sellafield reprocessing plant. (Author)

  1. 100 years of refrigeration engineering in the chemical industry

    Energy Technology Data Exchange (ETDEWEB)

    Dietrich, K.

    1987-11-01

    The report reviews the many uses of cold in the chemical industry. As an example, the development of the refrigeration system of a large chemical plant is described which distributes cold nearly without losses from a central refrigeration unit and can be controlled for optimum adaptation to the various chemical production processes. The contribution of refrigeration to higher product quality, higher product yield, materials recycling to save feedstocks, energy conservation by means of heat pumps, and environmental protection is pointed out.

  2. Industrial Information Processing

    DEFF Research Database (Denmark)

    Svensson, Carsten

    2002-01-01

    This paper demonstrates, how cross-functional business processes may be aligned with product specification systems in an intra-organizational environment by integrating planning systems and expert systems, thereby providing an end-to-end integrated and an automated solution to the “build-to-order...

  3. Agricultural and industrial process heat

    Science.gov (United States)

    Dollard, J.

    1978-01-01

    The application of solar energy to agricultural and industrial process heat requirements is discussed. This energy end use sector has been the largest and it appears that solar energy can, when fully developed and commercialized, displace from three to eight or more quads of oil and natural gas in U.S. industry. This potential for fossil fuel displacement in the agricultural and industrial process heat area sector represents a possible savings of 1.4 to 3.8 million barrels of oil daily.

  4. The Influence of Industrial Processing on the Physico-Chemical Characteristics and Lipid and Antioxidant Contents of Rice Bran; Influencia del procesado industrial sobre las caracteristicas quimico-fisicas y contenido en lipidos y antioxidantes del salvado de arroz

    Energy Technology Data Exchange (ETDEWEB)

    Pestana, V. R.; Zambiazi, R.; Mendonca, C. R. B.; Bruscatto, M. H.; Ramis-Ramos, G.

    2009-07-01

    A comparative study of the physico-chemical characteristics of rice bran during the successive steps of its industrial processing was carried out and included white and parboiled rice brans and pelletized and defatted rice brans. Moisture, acidity and peroxide index were determined. Using extracts in petroleum ether and gas chromatography, the total fat contents and the profiles of the fatty acids were established. The tocopherols and {gamma}-oryzanol were determined using high performance liquid chromatography. The bran of parboiled rice showed the largest fat content and the lowest acidity, indicating that parboiling is the most effective process for bran stabilization. Oleic, linoleic and palmitic acids predominated in all the samples. Pelletization did not produce a loss in lipids, tocopherols or {gamma}-oryzanol. All the samples showed higher contents of {alpha}-tocopherol, intermediate contents of {gamma}-tocopherol and much lower concentrations of {delta}-tocopherol. Nine components of {gamma}- oryzanol were detected, with a major proportion of the component that eluted in the fourth position, probably ferulate of 24-methylene cycloartenol. Pelletized rice bran showed the highest tocopherol content, whereas parboiled rice bran yielded the largest {gamma}-oryzanol content. (Author) 31 refs.

  5. Spectral Data Processing for Steel Industry

    OpenAIRE

    Bisot, Clémence

    2015-01-01

    For steel industry, knowing and understanding characteristics of a steel strip surface at every steps of the production process is a key element to control final product quality. Today as the quality requirements increase this task gets more and more important. The surface of new steel grades with complex chemical compositions has behaviors especially hard to master. For those grades in particular, surface control is critical and difficult. One of the promising technics to assess the problem ...

  6. Nylon and Chemical Fiber Industry of Shifeng Developing Synchronously

    Institute of Scientific and Technical Information of China (English)

    Du Yinshi

    2012-01-01

    Recently, over 40 people of the investigation group of the 10th Chinese Caprolactam and Nylon Market Forum went to Shifeng Group for visitation and investigation. They learnt the overall general situation of Shifeng Group in details, visited the factory areas such as chemical fiber & tire industrial park and agricultural automobile industrial park, and listened to the development process of Shifeng Group, the present production and future development of such products as nylon chip, nylon yarn and flat chafer fabric under nylon and chemical fiber project, and the market growth in recent two years. The investigation group showed great cooperation intention on the caprolactam project of Shifeng Group.

  7. Industrial emerging chemicals in the environment

    Directory of Open Access Journals (Sweden)

    Vojinović-Miloradov Mirjana B.

    2014-01-01

    Full Text Available In the recent time, considerable interest has grown concerning the presence of the emerging industrial chemicals, EmIC. They are contaminants that have possible pathway to enter to the environment and they are dominantly released by industrial and anthropogenic activities. EmIC are applied in different fields using as industrial chemicals (new and recently recognized, global organic contaminants (flame retardant chemicals, pharmaceuticals (for both human and animal uses, endocrine-modulating compounds, biological metabolites, personal care products, household chemicals, nanomaterial (energy storage products, lubricants, anticorrosive and agriculture chemicals and others that are applied to a wide variety of everyday items such as clothing, upholstery, electronics and automobile interiors. NORMAN (Network of reference laboratories for monitoring of emerging environmental pollutants has established an open, dynamic, list of emerging substances and pollutants. EmIC have been recently detected in the environment due to their long-term presence, pseudo-persistence and increased use. Improvements in sophisticated analytical methods and time integrative passive sampling have enabled the identification and quantification of EmIC, in very low concentrations (ppb, ppt and lower, which likely have been present in all environmental mediums for decades. Passive technology is an innovative technique for the time-integrated measurement of emerging contaminants in water, sediment, soil and air. Passive samplers are simple handling cost-effective tool that could be used in environmental monitoring programmes. These devices are now being considered as a part of an emerging strategy for monitoring a range of emerging industrial chemicals and priority pollutants in the aquatic environment. EmIC are substances that are not included in the routine monitoring programmes and whose fate, behaviour and (ecotoxicological effects are still not well understood. Emerging

  8. Coal chemical industry and its sustainable development in China

    International Nuclear Information System (INIS)

    China is rich in coal resource, which is vital for energy security in this country. In early 21st century, the coal chemical industry in China will be oriented to the development of high efficiency, safety, cleanliness, and optimum utilization. In this review, the authors present an introduction to the utilization status of primary energy production and consumption in China. Since 2005, fundamental research studies, supported by the Ministry of Science and Technology of Chinese National Basic Research Program, have been carried out at Taiyuan University of Technology. The Ministry stresses that the new coal chemical industry should be developed in a sustainable manner to realize effective utilization of energy. Moreover, upgrading the high technology to improve actively the recycling processes of coal chemical engineering is of strategic importance to realize the modern coal chemical engineering.

  9. Lyophilization: The process and industrial use

    Directory of Open Access Journals (Sweden)

    Pržić Dejan S.

    2004-01-01

    Full Text Available This article presents a general overview of lyophilization and discusses the underlying principles of the process through the basics of: formulation, freezing, primary drying and secondary drying. In this article lyophilization is defined as a stabilizing process in which the substance is first frozen and then the quantity of the solvent is reduced first by sublimation (primary drying and then by desorption (secondary drying to values that will no longer support biological growth or chemical reactions. Special mention was made of the industrial use of the process and emphasis was placed on the lyophilization of pharmaceutical products and food industry products. Lyophilization equipment, as well as the formulation of materials that can be lyophilized, are described in sufficient detail to give information on the restrictions and advantages of lyophlization. Processing economics and comparison with conventional drying methods are presented. A historical overview of the process and future developments presented from the industrial viewpoint give an insight on the previous application of lyophilization and the prospects of its broad industrial use.

  10. Radiation processing: a versatile technology for industry

    International Nuclear Information System (INIS)

    Soon after the discovery of x-ray in 1895 and radioactivity in 1896, it was recognized that ionizing radiation can modify the chemical, physical and/or biological properties of materials. However, it was only in the late 50's, when large radiation sources become available, has this unique property of radiation found industrial applications in radiation processing. Today, radiation processing has been used by industry in such diverse applications, such as radiation sterilization/decontamination of medical products, pharmaceuticals, cosmetics and their raw materials; radiation cross-linking of wire and cable insulation; production of heat shrinkable materials and polymer foam; and radiation curing of coatings, adhesives and inks on a wide variety of substrates. In addition to being a clean environment-friendly technology, radiation processing can also be used for the conservation of the environment by such processes as radiation treatment of flue gases to remove SO2 and NOx and disinfection of sewage sludge. Because of the many advantages offered by radiation processing, industry is showing strong interest in the technology as evidenced by the growing number of industrial radiation facilities in many countries. (author)

  11. Desulphurization of exhaust gases in chemical processes

    Energy Technology Data Exchange (ETDEWEB)

    Asperger, K.; Wischnewski, W.

    1981-01-01

    The sulfur content of exhaust gases can be reduced by: desulphurization of fuels; modification of processes; or treatment of resultant gases. In this paper a few selected examples from the chemical industry in the German Democratic Republic are presented. Using modified processes and treating the resultant gases, the sulphuric content of exhaust gases is effectively reduced. Methods to reduce the sulfur content of exhaust gases are described in the field of production of: sulphuric acid; viscose; fertilizers; and paraffin.

  12. Industrial Materials Processing Laser Markets

    Science.gov (United States)

    Followwill, Dorman

    1989-03-01

    The way I would like to handle this morning is first, to give you an overview before I put anything up in terms of slides. An overview of the study that we produced a couple of months ago. It is entitled "Industrial Materials Processing Laser Markets", and if you want information on that particular study, then you can speak with me at the coffee break.

  13. 40 CFR Table 1 to Subpart F of... - Synthetic Organic Chemical Manufacturing Industry Chemicals

    Science.gov (United States)

    2010-07-01

    ... Manufacturing Industry Chemicals 1 Table 1 to Subpart F of Part 63 Protection of Environment ENVIRONMENTAL... Synthetic Organic Chemical Manufacturing Industry Pt. 63, Subpt. F, Table 1 Table 1 to Subpart F of Part 63—Synthetic Organic Chemical Manufacturing Industry Chemicals Chemical name a CAS No. b Group...

  14. Technologies to support industrial processes

    International Nuclear Information System (INIS)

    Control and measuring techniques applied to industry have the common aim of increasing safety, reliability and plant availability. The industrial monitoring system needs a lot of sensors, whose signals, elaborated and interpreted, allow one to define the best working condition; moreover control instruments perform a diagnosis related to damages and breakages. The Experimental Engineering Division of ENEA's Thermal Reactor Department has developed sensors and measuring apparatus and has acquired advanced control techniques. All these systems, containing an original software, have been applied to industrial process problems and/or to experimental facilities both to increase reliability and to understand better process physics. Division activities are grouped in four sectors: non-destructive examinations (ultrasonic, eddy current, thermography, holographic interpherometry, penetrant liquids and magnetoscopy); innovative sensors (heated thermocouples, optical fiber sensors); advanced measuring systems (laser technology for fluidodynamic measures, nuclear radiation techniques, infrared measuring, mass spectrometer, hot-film anemometer, chromatographic apparatus); advanced technologies for diagnosis and signal analysis (digital image processing, statistical analysis). (author)

  15. A indústria de processamento químico no Brasil: suas motivações para pesquisa e desenvolvimento e suas interfaces com as políticas governamentais The chemical process industry in Brazil: its motivations for research and development and its interfaces with public policies

    Directory of Open Access Journals (Sweden)

    Alberto Ramy Mansur

    2005-12-01

    Full Text Available As the Chemical Science is an experimental one a Chemical Industry require technical people in all its staff level: from Directors and Managers to Operators. This chemical and chemical engineering based education is the foundation of the innovate process and motivation. The paper discusses this and the role of Public Policies to improve the R&D and innovation in the Brazilian Chemical Industry.

  16. Valorization of GaN based metal-organic chemical vapor deposition dust a semiconductor power device industry waste through mechanochemical oxidation and leaching: A sustainable green process.

    Science.gov (United States)

    Swain, Basudev; Mishra, Chinmayee; Lee, Chan Gi; Park, Kyung-Soo; Lee, Kun-Jae

    2015-07-01

    Dust generated during metal organic vapor deposition (MOCVD) process of GaN based semiconductor power device industry contains significant amounts of gallium and indium. These semiconductor power device industry wastes contain gallium as GaN and Ga0.97N0.9O0.09 is a concern for the environment which can add value through recycling. In the present study, this waste is recycled through mechanochemical oxidation and leaching. For quantitative recovery of gallium, two different mechanochemical oxidation leaching process flow sheets are proposed. In one process, first the Ga0.97N0.9O0.09 of the MOCVD dust is leached at the optimum condition. Subsequently, the leach residue is mechanochemically treated, followed by oxidative annealing and finally re-leached. In the second process, the MOCVD waste dust is mechanochemically treated, followed by oxidative annealing and finally leached. Both of these treatment processes are competitive with each other, appropriate for gallium leaching and treatment of the waste MOCVD dust. Without mechanochemical oxidation, 40.11 and 1.86 w/w% of gallium and Indium are leached using 4M HCl, 100°C and pulp density of 100 kg/m(3,) respectively. After mechanochemical oxidation, both these processes achieved 90 w/w% of gallium and 1.86 w/w% of indium leaching at their optimum condition.

  17. [Arsine: an unknown industrial chemical toxic].

    Science.gov (United States)

    Plantamura, J; Dorandeu, F; Burnat, P; Renard, C

    2011-07-01

    Arsines family includes many compounds with various toxicities. Arsenic trihydride or arsine is the most toxic form of arsenic. Powerful haemolytic gas, it has never been used as a chemical weapon because its toxicity is not immediate and it is non persistent. However, cases of industrial poisoning with arsine are still identified in spite of a strict regulation at work. It is also identified as a potential toxic of chemical terrorism. This agent, of which the mechanism of action is still not well defined, is badly recognized because of intoxications rarity. However, fast detection means are available. Health professionals and especially those who are involved in piratox plan need to learn to recognize arsine intoxication (hematuria, oliguria, haemolytic anemia) in order to provide early, specific treatment and avoid damages. PMID:21840437

  18. Valorization of GaN based metal-organic chemical vapor deposition dust a semiconductor power device industry waste through mechanochemical oxidation and leaching: A sustainable green process

    International Nuclear Information System (INIS)

    Dust generated during metal organic vapor deposition (MOCVD) process of GaN based semiconductor power device industry contains significant amounts of gallium and indium. These semiconductor power device industry wastes contain gallium as GaN and Ga0.97N0.9O0.09 is a concern for the environment which can add value through recycling. In the present study, this waste is recycled through mechanochemical oxidation and leaching. For quantitative recovery of gallium, two different mechanochemical oxidation leaching process flow sheets are proposed. In one process, first the Ga0.97N0.9O0.09 of the MOCVD dust is leached at the optimum condition. Subsequently, the leach residue is mechanochemically treated, followed by oxidative annealing and finally re-leached. In the second process, the MOCVD waste dust is mechanochemically treated, followed by oxidative annealing and finally leached. Both of these treatment processes are competitive with each other, appropriate for gallium leaching and treatment of the waste MOCVD dust. Without mechanochemical oxidation, 40.11 and 1.86 w/w% of gallium and Indium are leached using 4 M HCl, 100 °C and pulp density of 100 kg/m3, respectively. After mechanochemical oxidation, both these processes achieved 90 w/w% of gallium and 1.86 w/w% of indium leaching at their optimum condition. - Highlights: • Waste MOCVD dust is treated through mechanochemical leaching. • GaN is hardly leached, and converted to NaGaO2 through ball milling and annealing. • Process for gallium recovery from waste MOCVD dust has been developed. • Thermal analysis and phase properties of GaN to Ga2O3 and GaN to NaGaO2 is revealed. • Solid-state chemistry involved in this process is reported

  19. [Occupational digestive diseases in chemical industry workers of West Siberia].

    Science.gov (United States)

    Pomytkina, T E; Pershin, A N

    2010-01-01

    The high incidence of chronic digestive diseases is recorded in chemical industry workers exposed to the isolated action of noxious substances. The aim of the investigation was to make a hygienic assessment of the risk for occupational digestive diseases in chemical industry workers exposed to a combination of noxious drugs. The working conditions and the prevalence of digestive diseases were studied in 4120 workers engaged in chemical and auxiliary processes. Under the isolated action of noxious substances, the workers had an average of 35% increase in the incidence of digestive diseases than unexposed ones (p 4.0-11.1 and 3.5-10.7 times higher, respectively (p < 0.05) than in the unexposed subjects.

  20. Energy analysis of 108 industrial processes. Phase 1, industrial applications study

    Energy Technology Data Exchange (ETDEWEB)

    Hamel, B. B.; Brown, H. L.

    1979-06-01

    Extensive data are compiled for energy balances in 108 industrial processes. Specific information on unit operation, material, temperature, unrecoverable losses, along with the process flow diagram is given for each of the industries. The following industries are included: meak packing; milk; canned fruits and vegetables; baked goods; sugar refining; soybean; textiles; wood products; building materials; alkalies and chlorine; inorganic gases; pigments, chemicals; plastic materials and resins; synthetic rubbers; organic fibers; pharmaceutical preparations; organic chemicals; petroleum products; fertilizers; rubber products; glass; blast furnaces and steel mills; metals; farm machinery; motor vehicles; and photographic materials. The SIC's for each industry are identified.

  1. Industrial process heat market assessment

    Energy Technology Data Exchange (ETDEWEB)

    Bresnick, S.

    1981-12-01

    This report is designed to be a reference resource, giving a broad perspective of the potential HTGR market for industrial process heat. It is intended to serve as a briefing document for those wishing to obtain background information and also to serve as a starting point from which more detailed and refined studies may be undertaken. In doing so, the report presents a qualitative and quantitative description of the industrial process heat market in the US, provides a summary discussion of cogeneration experience to date, and outlines the existing institutional and financial framework for cogeneration. The intent is to give the reader an understanding of the current situation and experience in this area. The cogeneration area in particular is an evolving one because of regulations and tax laws, which are still in the process of being developed and interpreted. The report presents the latest developments in regulatory and legislative activities which are associated with that technology. Finally, the report presents a brief description of the three HTGR systems under study during the current fiscal year and describes the specific market characteristics which each application is designed to serve.

  2. Vision Systems Illuminate Industrial Processes

    Science.gov (United States)

    2013-01-01

    When NASA designs a spacecraft to undertake a new mission, innovation does not stop after the design phase. In many cases, these spacecraft are firsts of their kind, requiring not only remarkable imagination and expertise in their conception but new technologies and methods for their manufacture. In the realm of manufacturing, NASA has from necessity worked on the cutting-edge, seeking new techniques and materials for creating unprecedented structures, as well as capabilities for reducing the cost and increasing the efficiency of existing manufacturing technologies. From friction stir welding enhancements (Spinoff 2009) to thermoset composites (Spinoff 2011), NASA s innovations in manufacturing have often transferred to the public in ways that enable the expansion of the Nation s industrial productivity. NASA has long pursued ways of improving upon and ensuring quality results from manufacturing processes ranging from arc welding to thermal coating applications. But many of these processes generate blinding light (hence the need for special eyewear during welding) that obscures the process while it is happening, making it difficult to monitor and evaluate. In the 1980s, NASA partnered with a company to develop technology to address this issue. Today, that collaboration has spawned multiple commercial products that not only support effective manufacturing for private industry but also may support NASA in the use of an exciting, rapidly growing field of manufacturing ideal for long-duration space missions.

  3. Metabolic engineering is key to a sustainable chemical industry.

    Science.gov (United States)

    Murphy, Annabel C

    2011-08-01

    The depletion of fossil fuel stocks will prohibit their use as the main feedstock of future industrial processes. Biocatalysis is being increasingly used to reduce fossil fuel reliance and to improve the sustainability, efficiency and cost of chemical production. Even with their current small market share, biocatalyzed processes already generate approximately US$50 billion and it has been estimated that they could be used to produce up to 20% of fine chemicals by 2020. Until the advent of molecular biological technologies, the compounds that were readily accessible from renewable biomass were restricted to naturally-occurring metabolites. However, metabolic engineering has considerably broadened the range of compounds now accessible, providing access to compounds that cannot be otherwise reliably sourced, as well as replacing established chemical processes. This review presents the case for continued efforts to promote the adoption of biocatalyzed processes, highlighting successful examples of industrial chemical production from biomass and/or via biocatalyzed processes. A selection of emerging technologies that may further extend the potential and sustainability of biocatalysis are also presented. As the field matures, metabolic engineering will be increasingly crucial in maintaining our quality of life into a future where our current resources and feedstocks cannot be relied upon. PMID:21666928

  4. Implementation of high-dose chemical dosimetry for industrial facilities

    International Nuclear Information System (INIS)

    The purpose of this work is the implementation of methodology for high dose measurements using chemical dosimeters in liquid phase, traceable to the international metrology system, and make available in the country, the standard of high-dose to industrial irradiation facilities and research irradiators, trough the quality program with comparative measurements and direct use of the standard dosimeters in routine. The use of these low cost dosimetry systems in industrial irradiation facilities, assists to the certification requirements and it can reduce the costs with dosimetry for approximately 20% of the total dosimetry costs, using these systems in routine measurements and validation process, largely substituting the imported PMMA dosimeters, among others. (author)

  5. Constructing Global Production Activity Indices: The Chemical Industry

    OpenAIRE

    Saswati Mahapatra; Thomas K Swift

    2012-01-01

    This article first presents the challenges involved in constructing consistent, timely, and reliable short-term measures of national, regional, and global industry activity. The chemical industry is used as a case study. Second, this article presents the comparison of the movement or fluctuations in industrial production indices and chemical production indices that aid in determining if production in the chemical industry can be used as a proxy for total production in an economy. The American...

  6. Analysis of the Industrial Biodiesel Production Process

    International Nuclear Information System (INIS)

    The reaction of transesterification is the chemical transformation through which you get biodiesel from vegetable oils. The purpose of this work is to plan carefully all the stages of various biodiesel production processes on the basis of recent results obtained in the experimental research. These results allow defining the proper thermodynamic models to be used, the right interpretation of the phenomena and identifying the parameters which affect the process. The modelling was done with ASPENPLUS (R) defining three possible processes used in industrial purpose. A subsequent sensitivity analysis was done for each process allowing the identification of the optimal configurations. By comparing these solutions it is possible to choose the most efficient one to reduce the costs of the final product.

  7. Lignin as a renewable aromatic resource for the chemical industry

    OpenAIRE

    Gosselink, R.J.A.

    2011-01-01

    Valorization of lignin plays a key role in the further development of lignocellulosic biorefinery processes for biofuels and biobased materials production. Today’s increased demand for alternatives to fossil carbon-based products expands the interest and the need to create added value to the unconverted lignin fraction. The aim of the research was to study the potential of lignin to become a renewable aromatic resource for the chemical industry. Lignin can be considered as an abundantly...

  8. Creative research in the chemical industry - Four decades in retrospect

    Indian Academy of Sciences (India)

    Kuppuswamy Nagarajan

    2006-07-01

    My professional research career spanning more than four decades has been largely devoted to synthetic medicinal chemistry (Ciba, Bombay - now Mumbai - 21 years) followed by an equal number of years in process development of drugs, crop protection chemicals (Searle, Bombay) and drugs and speciality chemicals (Recon and Hikal, Bangalore). These efforts have involved several collaborators including many from other institutions and offered multitudinous challenges calling for continuous creativity in industrial setups. I was fortunate to have had a conducive environment to be able to respond to these challenges. I attempt to offer the readers in the ensuing pages a flavour of the excitement that has marked these years.

  9. ADVANCED OXIDATION PROCESSES FOR FOOD INDUSTRIAL WASTEWATER DECONTAMINATION

    OpenAIRE

    Dorota Krzemińska; Ewa Neczaj; Gabriel Borowski

    2015-01-01

    High organic matter content is a basic problem in food industry wastewaters. Typically, the amount and composition of the effluent varies considerably. In the article four groups of advanced processes and their combination of food industry wastewater treatment have been reviewed: electrochemical oxidation (EC), Fenton’s process, ozonation of water and photocatalytic processes. All advanced oxidation processes (AOP`s) are characterized by a common chemical feature: the capability of exploiting...

  10. Proposal for the development of Emission Scenario Documents on the Chemical Industry

    OpenAIRE

    Poel P van der; Bakker J; MEV; SEC

    2005-01-01

    ESDs are documents describing industrial processes in order to be able to estimate releases to the environment. Such documents are lacking for the chemical industry. For this complex branch of industry, sectors have been prioritised for which ESDs are most urgently needed. Subsequently, key concepts and tools are discussed which are instrumental in the production of ESDs for the chemical industry such as life cycle stages, factors influencing emissions and release quantification methods. As s...

  11. Advances in Chemical Engineering — A Review of Petrochemical Industry in China

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Chemical engineering has played an important role in the development of petrochemical industry. Some important advances in chemical engineering have been discussed in detail, i. e. petroleum refining, organic chemicals, synthetic resin, synthetic fibers and relevant raw materials, synthetic rubber, and process energy integration. The main business targets of China Petroleum & Chemical Corporation (SINOPEC Corp.) and the focus of further researches are also addressed.

  12. NCIP: An Environment-Friendly Chemical Industry Park

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Nanjing Chemical Industry Park (NCIP) was established in October 2001. The planned area of the park is 45 km2 and the development focus includes oil/ gas chemicals, basic organic chemical raw materials, fine chemicals, polymeric materials, life pharmaceuticals and new chemical materials.

  13. Industrial process heat from CANDU reactors

    International Nuclear Information System (INIS)

    It has been demonstrated on a large scale that CANDU reactors can produce industrial process steam as well as electricity, reliably and economically. The advantages of cogeneration have led to the concept of an Industrial Energy Park adjacent to the Bruce Nuclear Power Development in the province of Ontario. For steam demands between 300,000 and 500,00 lb/h (38-63 kg/s) and an annual load factor of 80%, the estimated cost of nuclear steam at the Bruce site boundary is $3.21/MBtu ($3.04GJ), which is at least 30% cheaper than oil-fired steam at the same site. The most promising near term application of nuclear heat is likely to be found within the energy-intensive chemical industry. Nuclear energy can substitute for imported oil and coal in the eastern provinces if the price remains competitive, but low cost coal and gas in the western provinces may induce energy-intensive industries to locate near those sources of energy. In the long term it may be feasible to use nuclear heat for the mining and extraction of oil from the Alberta tar sands. (auth)

  14. A 'Fine' chemical industry for life science products: green solutions to chemical challenges.

    Science.gov (United States)

    Bruggink, A; Straathof, A J J; van der Wielen, L A M

    2003-01-01

    Modern biotechnology, in combination with chemistry and process technology, is crucial for the development of new clean and cost effective manufacturing concepts for fine-chemical, food specialty and pharmaceutical products. The impact of biocatalysis on the fine-chemicals industry is presented, where reduction of process development time, the number of reaction steps and the amount of waste generated per kg of end product are the main targets. Integration of biosynthesis and organic chemistry is seen as a key development. The advances in bioseparation technology need to keep pace with the rate of development of novel bio- or chemocatalytic process routes with revised demands on process technology. The need for novel integrated reactors is also presented. The necessary acceleration of process development and reduction of the time-to-market seem well possible, particularly by integrating high-speed experimental techniques and predictive modelling tools. This is crucial for the development of a more sustainable fine-chemicals industry. The evolution of novel 'green' production routes for semi-synthetic antibiotics (SSAs) that are replacing existing chemical processes serves as a recent and relevant case study of this ongoing integration of disciplines. We will also show some challenges in this specific field. PMID:12747542

  15. Comparison between conventional chemical processes and bioprocesses in cotton fabrics

    OpenAIRE

    Mojsov, Kiro

    2015-01-01

    Textile processing is a growing industry that traditionally has used a lot of water, energy and harsh chemicals. They are also not easily biodegradable. Biotechnology in textiles is one of the revolutionary ways to promote the textile field. Bio-processing were accompanied by a significant lower demand of energy, water, chemicals, time and costs. Due to the ever growing costs for water and energy worldwide investigations are carried out to substitute conventional chemical textile processes by...

  16. A future perspective on the role of industrial biotechnology for chemicals production

    DEFF Research Database (Denmark)

    Woodley, John; Breuer, Michael; Mink, Daniel

    2013-01-01

    established in the pharmaceutical industry but is moving down the value chain toward bulk chemicals. Chemical engineers will have an essential role in the development of new processes where the need is for new design methods for effective implementation, just as much as new technology. Most interesting......The development of recombinant DNA technology, the need for renewable raw materials and a green, sustainable profile for future chemical processes have been major drivers in the implementation of industrial biotechnology. The use of industrial biotechnology for the production of chemicals is well...

  17. Energy conversion technology by chemical processes

    Energy Technology Data Exchange (ETDEWEB)

    Oh, I.W.; Yoon, K.S.; Cho, B.W. [Korea Inst. of Science and Technology, Seoul (Korea, Republic of)] [and others

    1996-12-01

    The sharp increase in energy usage according to the industry development has resulted in deficiency of energy resources and severe pollution problems. Therefore, development of the effective way of energy usage and energy resources of low pollution is needed. Development of the energy conversion technology by chemical processes is also indispensable, which will replace the pollutant-producing and inefficient mechanical energy conversion technologies. Energy conversion technology by chemical processes directly converts chemical energy to electrical one, or converts heat energy to chemical one followed by heat storage. The technology includes batteries, fuel cells, and energy storage system. The are still many problems on performance, safety, and manufacturing of the secondary battery which is highly demanded in electronics, communication, and computer industries. To overcome these problems, key components such as carbon electrode, metal oxide electrode, and solid polymer electrolyte are developed in this study, followed by the fabrication of the lithium secondary battery. Polymer electrolyte fuel cell, as an advanced power generating apparatus with high efficiency, no pollution, and no noise, has many applications such as zero-emission vehicles, on-site power plants, and military purposes. After fabricating the cell components and operating the single cells, the fundamental technologies in polymer electrolyte fuel cell are established in this study. Energy storage technology provides the safe and regular heat energy, irrespective of the change of the heat energy sources, adjusts time gap between consumption and supply, and upgrades and concentrates low grade heat energy. In this study, useful chemical reactions for efficient storage and transport are investigated and the chemical heat storage technology are developed. (author) 41 refs., 90 figs., 20 tabs.

  18. Review of Petroleum and Chemical Industry in 2006

    Institute of Scientific and Technical Information of China (English)

    Feng Shiliang

    2007-01-01

    @@ 1 Economic functioning of the petroleum and chemical industry in 2006 (1)Rapid growth of production With the completion of new and expanded facilities, petroleum and chemical production in China grew rapidly in 2006.

  19. Occupational health surveillance in the chemical industry.

    Science.gov (United States)

    Flueckiger, A

    2000-08-01

    Health surveillance has its well defined place within occupational health care. Only a few functions are specific to the chemical industry. Occupational health surveillance used to be targeted at the early detection of occupational illnesses (secondary prevention) but other purposes have gained importance in recent years: ensuring the fitness of every worker for his or her job, promoting workers' health in general, contributing to the safety of the plant operation by identifying workers whose behaviour is likely to endanger others, contributing to product quality by assisting in the fulfilment of good manufacturing practice requirements, etc. If the occupational physician wants to maintain his role as key player in protecting workers' health, he must get involved in the important activities of primary prevention contributing directly to workplace improvements. Such improvements can only be based on systematic assessments of the workplaces. These assessments again provide the necessary objective basis to structure health surveillance in a way that takes into account the possible adverse effects coming from the workplace. PMID:11294324

  20. Financial Crisis 2008 Impact on China Chemical Fiber Industry

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    On Jun. 10-12, 2009, The 15th China’s International Chemical Fiber Conference, with the theme of "Financial Crisis and Chemical Fiber Industry", was held at Hangzhou, Zhejiang Province. During the conference, the China Chemical Fiber Association released a speech on "The Impact of Global Financial Crisis on China Chemical Fiber Industry and Response Strategies". Here in the following part, we will focus on the part of the impact of financial crisis on Chinese chemical fiber industry. In our next issue, we will go on with the part of Response Strategies.

  1. Proposal for the development of Emission Scenario Documents on the Chemical Industry

    NARCIS (Netherlands)

    Poel P van der; Bakker J; MEV; SEC

    2005-01-01

    ESDs are documents describing industrial processes in order to be able to estimate releases to the environment. Such documents are lacking for the chemical industry. For this complex branch of industry, sectors have been prioritised for which ESDs are most urgently needed. Subsequently, key concepts

  2. Idaho Chemical Processing Plant Process Efficiency improvements

    Energy Technology Data Exchange (ETDEWEB)

    Griebenow, B.

    1996-03-01

    In response to decreasing funding levels available to support activities at the Idaho Chemical Processing Plant (ICPP) and a desire to be cost competitive, the Department of Energy Idaho Operations Office (DOE-ID) and Lockheed Idaho Technologies Company have increased their emphasis on cost-saving measures. The ICPP Effectiveness Improvement Initiative involves many activities to improve cost effectiveness and competitiveness. This report documents the methodology and results of one of those cost cutting measures, the Process Efficiency Improvement Activity. The Process Efficiency Improvement Activity performed a systematic review of major work processes at the ICPP to increase productivity and to identify nonvalue-added requirements. A two-phase approach was selected for the activity to allow for near-term implementation of relatively easy process modifications in the first phase while obtaining long-term continuous improvement in the second phase and beyond. Phase I of the initiative included a concentrated review of processes that had a high potential for cost savings with the intent of realizing savings in Fiscal Year 1996 (FY-96.) Phase II consists of implementing long-term strategies too complex for Phase I implementation and evaluation of processes not targeted for Phase I review. The Phase II effort is targeted for realizing cost savings in FY-97 and beyond.

  3. Idaho Chemical Processing Plant Process Efficiency improvements

    International Nuclear Information System (INIS)

    In response to decreasing funding levels available to support activities at the Idaho Chemical Processing Plant (ICPP) and a desire to be cost competitive, the Department of Energy Idaho Operations Office (DOE-ID) and Lockheed Idaho Technologies Company have increased their emphasis on cost-saving measures. The ICPP Effectiveness Improvement Initiative involves many activities to improve cost effectiveness and competitiveness. This report documents the methodology and results of one of those cost cutting measures, the Process Efficiency Improvement Activity. The Process Efficiency Improvement Activity performed a systematic review of major work processes at the ICPP to increase productivity and to identify nonvalue-added requirements. A two-phase approach was selected for the activity to allow for near-term implementation of relatively easy process modifications in the first phase while obtaining long-term continuous improvement in the second phase and beyond. Phase I of the initiative included a concentrated review of processes that had a high potential for cost savings with the intent of realizing savings in Fiscal Year 1996 (FY-96.) Phase II consists of implementing long-term strategies too complex for Phase I implementation and evaluation of processes not targeted for Phase I review. The Phase II effort is targeted for realizing cost savings in FY-97 and beyond

  4. Characterization of chemical compounds for dosimetry of the radiation in industrial processes; Caracterizacao de compostos quimicos para dosimetria das radiacaoes em processos industriais

    Energy Technology Data Exchange (ETDEWEB)

    Galante, Ana Maria Sisti

    1999-07-01

    Different chemical compounds have been studied to optimize dosimetric systems in irradiation processes. In this study 2,3,5 Triphenyl -2H- Tetrazolium Chloride, Brilliant Cresyl Blue, Bromocresol Green and Potassium Nitrate were investigated for their merits or faults, for {sup 60} Co gamma field, in order to verify if can be considered as dosimeters. Fricke solution was used as reference dosimeter to determine absorption dose rates at the gamma facilities.Only Bromocresol Green and Potassium Nitrate are recommended for dosimetry purposes since the main characteristics were achieved. The other two compounds could be used in dosimetry with changes in their formulation. Bromocresol Green and potassium Nitrate are reproducible and radiation sensitive for absorbed doses from 300 Gy to 150 kGy Bromocresol Green was used in liquid form and Potassium Nitrate was prepared in solid pellets form. Spectrophotometry in the visible region was used as the main detection technique, which allows relating optical absorption, before and after irradiation, with the absorbed dose. The maximum absorption wavelength for each compound was observed at 450-460nm for bromocresol Green and 546nm for Potassium Nitrate. Dose calibration curves are linear for both compounds in all dose intervals. When irradiated with accelerated electrons, with energies between o,9 MeV and 1,5MeV, optical absorption intensification, of about 2,6 times, was observed when comparing results for Potassium Nitrate, with those for gamma rays. All the evaluations are presented in this work. (author)

  5. Pollution prevention studies in the textile wet processing industry

    OpenAIRE

    Hendrickx, Ilse

    1995-01-01

    The objective of this study was to investigate pollution prevention (PP) opportunities in the textile wet processing industry. This industry uses vast amounts of water, energy and chemicals. PP audits were conducted at four textile companies. The companies were located in Virginia and included: a denim and soft wash laundry- a fiberglass yam processing plant; a plant dyeing and printing cotton fabric; and a nylon yam dyeing and finishing plant. Each company was visited sever...

  6. The changing landscape of careers in the chemical industry

    Science.gov (United States)

    Watson, Keith J.

    2011-09-01

    Changes in the chemical industry over the past decade -- ranging from globalization to an increased focus on speciality chemicals -- threaten to leave the aspiring industrial chemist unprepared. This Commentary discusses those changes and outlines strategies to enter the job market as well equipped as possible.

  7. Biobased chemicals: the convergence of green chemistry with industrial biotechnology.

    Science.gov (United States)

    Philp, Jim C; Ritchie, Rachael J; Allan, Jacqueline E M

    2013-04-01

    Policy issues around biobased chemicals are similar to those for biobased plastics. However, there are significant differences that arise from differences in production volumes and the more specific applications of most chemicals. The drivers for biobased chemicals production are similar to those for biobased plastics, particularly the environmental drivers. However, in Europe, biobased chemical production is further driven by the need to improve the competitiveness of the chemicals industry. PMID:23394962

  8. Personal Simulator of Chemical Process

    Institute of Scientific and Technical Information of China (English)

    吴重光

    2002-01-01

    The Personal Simulator of chemical process (PS) means that fully simulationsoftware can be run on one personal computer. This paper describes the kinds of PSprograms, its features, the graphic functions and three examples. PS programs are allbased on one object-oriented and real-time simulation software environment. Authordevelops this simulation software environment. An example of the batch reaction kineticsmodel is also described. Up to now a lot of students in technical schools and universitieshave trained on PS. The training results are very successful.

  9. Meeting the challenges related to material issues in chemical industries

    Indian Academy of Sciences (India)

    Baldev Raj; U Kamachi Mudali; T Jayakumar; K V Kasiviswanathn; K Natarajan

    2000-12-01

    Reliable performance and profitability are two important requirements for any chemical industry. In order to achieve high level of reliability and excellent performance, several issues related to design, materials selection, fabrication, quality assurance, transport, storage, inputs from condition monitoring, failure analysis etc. have to be adequately addressed and implemented. Technology related to nondestructive testing and monitoring of the plant is also essential for precise identification of defect sites and to take appropriate remedial decision regarding repair, replacement or modification of process conditions. The interdisciplinary holistic approach enhances the life of critical engineering components in chemical plants. Further, understanding the failure modes of the components through the analysis of failed components throws light on the choice of appropriate preventive measures to be taken well in advance, to have a control over the overall health of the plant. The failure analysis also leads to better design modification and condition monitoring methodologies, for the next generation components and plants. At the Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam, a unique combination of the expertise in design, materials selection, fabrication, NDT development, condition monitoring, life prediction and failure analysis exists to obtain desired results for achieving high levels of reliability and performance assessment of critical engineering components in chemical industries. Case studies related to design, materials selection and fabrication aspects of critical components in nuclear fuel reprocessing plants, NDT development and condition monitoring of various components of nuclear power plants, and important failure investigations on critical engineering components in chemical and allied industries are discussed in this paper. Future directions are identified and planned approaches are briefly described.

  10. Chemical sensors and gas sensors for process control in biotechnology

    International Nuclear Information System (INIS)

    This paper is concerned with the possibilities for chemical measurement of the progress of biotechnological processes which are offered by devices already developed for other demanding applications. It considers the potential use of ultrasonic instrumentation originally developed for the nuclear industry, gas measurement methods from the fields of environmental monitoring and combustion control, nuclear instruments developed for the oil, mining and chemical industries, robotic systems and advanced control techniques. (author)

  11. ADVANCED OXIDATION PROCESSES FOR FOOD INDUSTRIAL WASTEWATER DECONTAMINATION

    Directory of Open Access Journals (Sweden)

    Dorota Krzemińska

    2015-02-01

    Full Text Available High organic matter content is a basic problem in food industry wastewaters. Typically, the amount and composition of the effluent varies considerably. In the article four groups of advanced processes and their combination of food industry wastewater treatment have been reviewed: electrochemical oxidation (EC, Fenton’s process, ozonation of water and photocatalytic processes. All advanced oxidation processes (AOP`s are characterized by a common chemical feature: the capability of exploiting high reactivity of HO• radicals in driving oxidation processes which are suitable for achieving decolonization and odour reduction, and the complete mineralization or increase of bioavailability of recalcitrant organic pollutants.

  12. Preliminary overview of innovative industrial-materials processes

    Energy Technology Data Exchange (ETDEWEB)

    Hane, G.J.; Hauser, S.G.; Blahnik, D.E.; Eakin, D.E.; Gurwell, W.E.; Williams, T.A.; Abarcar, R.; Szekely, J.; Ashton, W.B.

    1983-09-01

    In evaluating the potential for industrial energy conservation, 45 candidate processes were identified. The chemical and the iron and steel industries presented the most well-developed candidates, whereas those processes identified in the pulp and paper and textiles industries were the most speculative. Examples of the candidate processes identified include direct steelmaking and ore-to-powder systems, which potentially require 30 to 40% less energy, respectively, than conventional steelmaking systems; membrane separations and freeze crystallization, which offer up to 90% reductions in energy use when compared with distillation; the cold processing of cement, which offers a 50% reduction in energy requirements; and the dry forming of paper, which offers a 25% reduction in the energy needed for papermaking. A review of all the industries revealed that the revolutionary alternatives often use similar concepts in avoiding current process inefficiencies. These concepts include using chemical, physical, or biological processes to replace thermally intensive processes; using specific forms of energy to minimize wasteful thermal diffusion; using chemical, biological, or ultrasonic processes to replace physical reduction; combining multiple processing steps into a single reactor; using a dry processing to eliminate energy needed for evaporation; and using sterilization or biotechnology to reduce the need for refrigeration.

  13. Sustainability Indicators for Chemical Processes: III. Biodiesel Case Study

    Science.gov (United States)

    The chemical industry is one of the most important business sectors, not only economically, but also societally; as it allows humanity to attain higher standards and quality of life. Simultaneously, chemical products and processes can be the origin of potential human health and ...

  14. Radiation processing in the plastics industry

    International Nuclear Information System (INIS)

    The interaction of ionizing radiation with organic substrates to produce useful physical and chemical changes is the basis of the radiation processing industry for plastics. Electron beam (EB) accelerators dominate the industry; however, there are a few small applications that use gamma radiation. The five general product categories that account for over 95% of the worldwide EB capacity used for plastics production are the following: wire and cable insulation; heat-shrinkable film, tubes and pipes; radiation-curable coatings; rubber products; and polyolefin foam. A total of 6.1% of the yearly production of these products in the United States is EB treated. The United States accounts for 59% of the total worldwide EB capacity of 20.5 MW (1984), followed by Europe (16%) and Japan (15%). There are 469 to 479 individual EB units worldwide used for the production of plastics and rubber. The average annual rate of growth (AARG) for the EB processing of plastics in Japan, from 1977 to 1987, was 13.3%. The AARG for Japan has decreased from 20% for 1977 to 198, to 6.4% for 1984 to 1987. Radiation cross-linking, of power cable insulation (cable rating ≥75 kV), thick polyolefin and rubber sheet (≥15 mm), and thick-walled tubing is one fo the potential applications for a 5- to 10-MeV EB system. Other products such as coatings, films and wire insulation may be economically EB-treated using a 5 to 10 MeV accelerator, if several layers of the product could be irradiated simultaneously. Two general product categories that require more study to determine the potential of high-energy EB processing are moulded plastics and composite materials. 32 refs

  15. Advances in Chemical Engineering A Review of Petrochemical Industry in China

    Institute of Scientific and Technical Information of China (English)

    洪定一

    2001-01-01

    Chemical engineering has played an important role in the development of petrochemical industry. Some important advances in chemical engineering have been discussed in detail, i. e. petroleum refining, organic chemicals,synthetic resin, synthetic fibers and relevant raw materials, synthetic rubber, and process energy integration. The main business targets of China Petroleum & Chemical Corporation (SINOPEC Corp.) and the focus of further researches axe also addressed.

  16. Stochastic processes in chemical physics

    CERN Document Server

    Shuler, K E

    2009-01-01

    The Advances in Chemical Physics series provides the chemical physics and physical chemistry fields with a forum for critical, authoritative evaluations of advances in every area of the discipline. Filled with cutting-edge research reported in a cohesive manner not found elsewhere in the literature, each volume of the Advances in Chemical Physics series serves as the perfect supplement to any advanced graduate class devoted to the study of chemical physics.

  17. Recent Development and Status of CNPC's Refining and Chemical Industry

    Institute of Scientific and Technical Information of China (English)

    Zhou Weiyong

    1997-01-01

    @@ In the past one and halfyear since carrying China National Petroleum Corporation's (CNPC) Ninth Five-Year Plan (1996-2000), CNPC's oil refining and chemical industry has made considerable progress.

  18. Adapting SimpleTreat for simulating behaviour of chemical substances during industrial sewage treatment.

    Science.gov (United States)

    Struijs, J; van de Meent, D; Schowanek, D; Buchholz, H; Patoux, R; Wolf, T; Austin, T; Tolls, J; van Leeuwen, K; Galay-Burgos, M

    2016-09-01

    The multimedia model SimpleTreat, evaluates the distribution and elimination of chemicals by municipal sewage treatment plants (STP). It is applied in the framework of REACH (Registration, Evaluation, Authorization and Restriction of Chemicals). This article describes an adaptation of this model for application to industrial sewage treatment plants (I-STP). The intended use of this re-parametrized model is focused on risk assessment during manufacture and subsequent uses of chemicals, also in the framework of REACH. The results of an inquiry on the operational characteristics of industrial sewage treatment installations were used to re-parameterize the model. It appeared that one property of industrial sewage, i.e. Biological Oxygen Demand (BOD) in combination with one parameter of the activated sludge process, the hydraulic retention time (HRT) is satisfactory to define treatment of industrial wastewater by means of the activated sludge process. The adapted model was compared to the original municipal version, SimpleTreat 4.0, by means of a sensitivity analysis. The consistency of the model output was assessed by computing the emission to water from an I-STP of a set of fictitious chemicals. This set of chemicals exhibit a range of physico-chemical and biodegradability properties occurring in industrial wastewater. Predicted removal rates of a chemical from raw sewage are higher in industrial than in municipal STPs. The latter have typically shorter hydraulic retention times with diminished opportunity for elimination of the chemical due to volatilization and biodegradation. PMID:27344605

  19. Chemical exposure and lung function in fragrance industry employees

    OpenAIRE

    Dix, Garry R.

    2012-01-01

    Introduction Production employees within the UK fragrance industry are exposed to large quantities of chemical substances and mixtures over working shifts. Occupational respiratory exposure within this industry is managed in line with relevant legislation and guidelines. There is a lack, however, of published literature studying the effects of respiratory exposure to chemicals on fragrance production employees. A multi-site cross-sectional study was conducted using employees from the ...

  20. Industrial processes of olefin metathesis. Pt. 1

    Energy Technology Data Exchange (ETDEWEB)

    Warwel, S.

    1987-05-01

    Olefin metathesis opens new synthetic routes to typical petrochemicals (ethylene, propylene, n-butenes), special olefins (neohexene, higher molecular linear olefins, , -dienes) and unsaturated polymers (polynorbornene, -cyclooctene, -dicyclopentadiene) in an industrial scale. The 8 metathesis processes used in industry and further possible applications of olefin metathesis are reviewed.

  1. SAPHYR: A new chemical stabilisation process

    Energy Technology Data Exchange (ETDEWEB)

    Baratto, Gilles; Fernandes, Paulo; Patria; Lucie; Cretenot, Didier

    2003-07-01

    Odour control and dewaterability are the key criteria during biosolids storage either for use on land or incineration. In the case of use on land, stabilisation/sanitisation are also part of the key criteria. Vivendi Water Systems developed the SAPHYR process to answer those three requirements. The SAPHYR process principle is based on an acidification of biosolids associated to the addition of nitrite. The main results are a noticeable odour control lasting other periods of 6 to 9 months, an improved dewaterability (2 to 4 points of dryness) and depending on chemical dosages a stabilisation or a sanitisation of biosolids. Another characteristic is that biosolids conditioned with the Saphyr process can be used both on land or for incineration. After several demonstrations on more than 5 different plants throughout France on a 10 000 p.e. unit, the first industrial reference of the process was installed on a 50 000 population equivalent wastewater treatment plant in 2002 and has been in operation since december 2002. A close monitoring of the process operation, the biosolids quality and its storage and spreading on land is planned from November 2002 to spring 2003. A comparison with lime addition will take place on the same plant. The present paper will produce a presentation of the SAPHYR process, its operation on a 50 000 pe WWTP and its different applications for biosolids storage.

  2. Environmental challenges for the Egg Processing Industry

    DEFF Research Database (Denmark)

    Mortensen, Bent Ole Gram; Hald, Mie

    Environmental regulation within the European Union and its Member States has evolved from command-and-control regulation to more complex ways of regulation. Different industries may be more or less ‘vulnerable’ towards an increased level of environmental regulation. The food industry is among those...... industries having a large consumption of natural resources (water and energy) and produces significantly amounts of residue (waste water, carbon dioxide and biodegradable waste). As such it is only natural that the food industry is governed by environmental regulation. In this book the Egg......-processing industry has been selected as a case study in order to be capable of illustrating the impact of such regulation on industry...

  3. Industrial processing versus home processing of tomato sauce

    NARCIS (Netherlands)

    Tomas, Merve; Beekwilder, Jules; Hall, Robert D.; Sagdic, Osman; Boyacioglu, Dilek; Capanoglu, Esra

    2017-01-01

    The effect of industrial and home processing, in vitro gastrointestinal digestion, individual phenolic content, and antioxidant capacity of tomato into tomato sauce were investigated. Industrial processing of tomato fruit into sauce had an overall positive effect on the total antioxidant capacity

  4. Expert systems in the process industries

    Science.gov (United States)

    Stanley, G. M.

    1992-01-01

    This paper gives an overview of industrial applications of real-time knowledge based expert systems (KBES's) in the process industries. After a brief overview of the features of a KBES useful in process applications, the general roles of KBES's are covered. A particular focus is diagnostic applications, one of the major applications areas. Many applications are seen as an expansion of supervisory control. The lessons learned from numerous online applications are summarized.

  5. Enhancing probiotic stability in industrial processes

    OpenAIRE

    Gueimonde, Miguel; Sánchez, Borja

    2012-01-01

    Background: Manufacture of probiotic products involves industrial processes that reduce the viability of the strains. This lost of viability constitutes an economic burden for manufacturers, compromising the efficacy of the product and preventing the inclusion of probiotics in many product categories. Different strategies have been used to improve probiotic stability during industrial processes. These include technological approaches, such as the modification of production parameters or the r...

  6. NEED OF FOOD PROCESSING INDUSTRY IN INDIA

    OpenAIRE

    D. D. Kadam; Shrikrishna Chandanshiv

    2015-01-01

    Food processing industry is of enormous significance for India's development because of the vital linkages and synergies it promotes between the two pillars of our economy, industry and agriculture. India produces about 450 million tons of raw food materials of plant and animal origin which are refined, stored and transformed into various usable products using c o nv e n ti o n a l a n d mo d e r n postharvest and food processing technology. Estimated va...

  7. Application and industrialization of irradiation processing technique

    International Nuclear Information System (INIS)

    Irradiation processing technique is a new processing technique. At present, there are 40 sets of electron accelerators have been built or are building for industry are, total power comes to 1436 kw. The products provided have been 8 types and several ten kinds. Current status of radiation processing technique at home and abroad are reviewed

  8. Profile of the chemicals industry in California: Californiaindustries of the future program

    Energy Technology Data Exchange (ETDEWEB)

    Galitsky, Christina; Worrell, Ernst

    2004-06-01

    The U.S. Department of Energy (DOE) Office of Industrial Technologies (OIT) established the Industries of the Future (IOF) program to increase energy efficiency, reduce waste production and to improve competitiveness, currently focusing on nine sectors. The IOF is a partnership strategy involving industry, the research community and the government, working together to identify technology needs, promote industrial partnerships and implement joint measures with all partners involved. The State Industries of the Future (SIOF) program delivers the accomplishments of the national Industries of the Future strategy to the local level, to expand the technology opportunities to a larger number of partners and reach smaller businesses and manufacturers that were not initially involved in the IOF effort. The state programs bring together industry, academia, and state agencies to address the important issues confronting industry in the state. These public-private coalitions facilitate industry solutions locally and enhance economic development. California has started a State Industries of the Future effort, in collaboration with the U.S. Department of Energy. The California Energy Commission (CEC) is leading the SIOF program in California, as part of many other programs to improve the energy efficiency and performance of industries in California. The California State IOF program aims to build a network of participants from industry, academia and government in four selected industrial sectors as a basis for the development of a strategic partnership for industrial energy efficient technology in the state. In California the IOF effort focuses petroleum refining, chemical processing, food processing and electronics. As part of this effort, the SIOF program will develop roadmaps for technology development for the selected sectors. On the basis of the roadmap, the program will develop successful projects with co-funding from state and federal government, and promote industry

  9. Profile of the chemicals industry in California: Californiaindustries of the future program

    Energy Technology Data Exchange (ETDEWEB)

    Galitsky, Christina; Worrell, Ernst

    2004-06-01

    The U.S. Department of Energy (DOE) Office of Industrial Technologies (OIT) established the Industries of the Future (IOF) program to increase energy efficiency, reduce waste production and to improve competitiveness, currently focusing on nine sectors. The IOF is a partnership strategy involving industry, the research community and the government, working together to identify technology needs, promote industrial partnerships and implement joint measures with all partners involved. The State Industries of the Future (SIOF) program delivers the accomplishments of the national Industries of the Future strategy to the local level, to expand the technology opportunities to a larger number of partners and reach smaller businesses and manufacturers that were not initially involved in the IOF effort. The state programs bring together industry, academia, and state agencies to address the important issues confronting industry in the state. These public-private coalitions facilitate industry solutions locally and enhance economic development. California has started a State Industries of the Future effort, in collaboration with the U.S. Department of Energy. The California Energy Commission (CEC) is leading the SIOF program in California, as part of many other programs to improve the energy efficiency and performance of industries in California. The California State IOF program aims to build a network of participants from industry, academia and government in four selected industrial sectors as a basis for the development of a strategic partnership for industrial energy efficient technology in the state. In California the IOF effort focuses petroleum refining, chemical processing, food processing and electronics. As part of this effort, the SIOF program will develop roadmaps for technology development for the selected sectors. On the basis of the roadmap, the program will develop successful projects with co-funding from state and federal government, and promote industry

  10. Experiments To Demonstrate Chemical Process Safety Principles.

    Science.gov (United States)

    Dorathy, Brian D.; Mooers, Jamisue A.; Warren, Matthew M.; Mich, Jennifer L.; Murhammer, David W.

    2001-01-01

    Points out the need to educate undergraduate chemical engineering students on chemical process safety and introduces the content of a chemical process safety course offered at the University of Iowa. Presents laboratory experiments demonstrating flammability limits, flash points, electrostatic, runaway reactions, explosions, and relief design.…

  11. Application of activated sludge process followed by physical-chemical processes in the treatment of industrial saline effluent for reuse - doi: 10.4025/actascitechnol.v35i2.13006

    OpenAIRE

    Milene Carvalho Bongiovani; Márcia Dezotti; Geraldo André Thurler Fontoura

    2013-01-01

    The treatment of complex effluent with high salinity and sometimes with toxicity rates from a chemical plant is investigated. Two reactors were monitored continuously: control reactor R1 and reactor R2 adapted for saline effluent with 25h-HRT. The adaptation process to saline effluent (0 - 100%) was effective in removing COD and N-NH4+, respectively with 70 and 85% efficiency. After adaptation, the sequence coagulation/flocculation (40 mg L-1 PAC coagulant and 0.3 mg L-1 cationic polymer), ra...

  12. Chemical reagent and process for refuse disposal

    International Nuclear Information System (INIS)

    A process for treating refuse by mixing them with a reactive chemical and a puzzolana-type material. Said chemical includes a retarding agent which modifies the viscosity and an accelerating agent. (author)

  13. Safety- and Risk Analysis Activities in Chemical Industry in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Kozine, Igor; Duijm, Nijs Jan; Lauridsen Kurt [Risoe National Laboratory, Roskilde (Denmark). Systems Analysis Department

    2001-07-01

    The current paper gives an overview of the legislation and the methods used in safety and risk management in the chemical industry within Europe and in particular within the European Union. The paper is based on a report that has been written for the SOS-1 project under the Nordic nuclear safety research (NKS). Safety- and risk-related matters in the process industry, in particular, in chemical, within the EU are subject to consideration at three levels: (1) EU legislation, (2) European/intemational standardisation, and (3) socio-economic analysis. EC Directives define the 'essential requirements', e.g., protection of health and safety, that must be fulfilled when goods are placed on the market or some industry is put into operation. The European standards bodies (CEN, CENELEC and ETSI) have the task of establishing the corresponding technical specifications, meeting the essential requirements of the Directives, compliance with which will provide a presumption of conformity with the essential requirements. Such specifications are referred to as 'harmonised standards'. Compliance with harmonised standards remains voluntary, and manufacturers are free to choose any other technical solution that provides compliance with the essential requirements. This view is stated in the 'New Approach' to technical harmonisation and standardisation (details can be found on the web page: http://europe.eu.int/comm/enterprise/newapproach/standardization/index .html). Standardisation as well as the regulation of technical risks is increasingly being undertaken at European or international level. The European legislator limits its role to the affirmation of overall objectives, and leaves it to the economic players to draw up the technical procedures and standards to specify in detail the ways and means of attaining them. Many countries have introduced requirements that new legislation and/or administrative regulations be subject to socio-economic analysis

  14. Recovery Processes of Organic Acids from Fermentation Broths in the Biomass-Based Industry.

    Science.gov (United States)

    Li, Qian-Zhu; Jiang, Xing-Lin; Feng, Xin-Jun; Wang, Ji-Ming; Sun, Chao; Zhang, Hai-Bo; Xian, Mo; Liu, Hui-Zhou

    2016-01-01

    The new movement towards green chemistry and renewable feedstocks makes microbial production of chemicals more competitive. Among the numerous chemicals, organic acids are more attractive targets for process development efforts in the renewable-based biorefinery industry. However, most of the production costs in microbial processes are higher than that in chemical processes, among which over 60% are generated by separation processes. Therefore, the research of separation and purification processes is important for a promising biorefinery industry. This review highlights the progress of recovery processes in the separation and purification of organic acids, including their advantages and disadvantages, current situation, and future prospects in terms of recovery yields and industrial application.

  15. Recovery Processes of Organic Acids from Fermentation Broths in the Biomass-Based Industry.

    Science.gov (United States)

    Li, Qian-Zhu; Jiang, Xing-Lin; Feng, Xin-Jun; Wang, Ji-Ming; Sun, Chao; Zhang, Hai-Bo; Xian, Mo; Liu, Hui-Zhou

    2016-01-01

    The new movement towards green chemistry and renewable feedstocks makes microbial production of chemicals more competitive. Among the numerous chemicals, organic acids are more attractive targets for process development efforts in the renewable-based biorefinery industry. However, most of the production costs in microbial processes are higher than that in chemical processes, among which over 60% are generated by separation processes. Therefore, the research of separation and purification processes is important for a promising biorefinery industry. This review highlights the progress of recovery processes in the separation and purification of organic acids, including their advantages and disadvantages, current situation, and future prospects in terms of recovery yields and industrial application. PMID:26403818

  16. Interface design in the process industries

    Science.gov (United States)

    Beaverstock, M. C.; Stassen, H. G.; Williamson, R. A.

    1977-01-01

    Every operator runs his plant in accord with his own mental model of the process. In this sense, one characteristic of an ideal man-machine interface is that it be in harmony with that model. With this theme in mind, the paper first reviews the functions of the process operator and compares them with human operators involved in control situations previously studied outside the industrial environment (pilots, air traffic controllers, helmsmen, etc.). A brief history of the operator interface in the process industry and the traditional methodology employed in its design is then presented. Finally, a much more fundamental approach utilizing a model definition of the human operator's behavior is presented.

  17. Geothermal energy market potential in industrial processing

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, R.J.; Hanny, J.A.; Knuth, W.H.

    1978-11-01

    Geothermal energy is currently being used for a number of industrial processes in countries throughout the world. Its application in the United States is mainly limited to space heating even though the temperature of the geothermal fluid is sufficient for process uses, and could be sold at attractive prices while maintaining a high return on investment. The temperature span for industrial use ranges from 40 to 275/sup 0/C, thus encompassing both the abundant low temperature and the less available high temperature resources. Hydrothermal fluids can be used either directly or indirectly dependent upon fluid quality and process needs. The barriers facing hydrothermal industrial process development are (a) the development infrastructure does not exist, (b) energy users are not aware of hydrothermal energy and its advantages, (c) federal incentives are limited, (d) resources are not fully defined.

  18. Solar energy for industrial process heat

    Science.gov (United States)

    Barbieri, R. H.; Pivirotto, D. L.

    1979-01-01

    Findings of study of potential use for solar energy utilization by California dairy industry, prove that applicable solar energy system furnish much of heat needed for milk processing with large savings in expenditures for oil and gas and ensurance of adequate readily available sources of process heat.

  19. Radioisotopes and radiation processing in industry

    International Nuclear Information System (INIS)

    Types of radiation technology and labelled atom application which are not widely known but are widely used in industry are considered. Attention is paid to 60Co radiation sources and electron accelerators used in commercial plants for irradiation. Industrial sterilization of single application medical products and pharmaceuticals, spices and other products, food-stuff irradiation, sewage disinfection, polymerization, fabrication of wood-plastic composites, vulcanization etc. are indicated as radiation technolgy application spheres. Attention is paid to radiation technology in the developing countries. Tracer techniques are applied practically in all industrial fields, in paricular, in chemical technology, metallurgy, mineral exploration, environmental protection and sanitation. The IAEA activity in the field of tracer technique and radiation technology application is stressed

  20. Sequential anaerobic-adsorption treatment of chemical industry wastewater.

    Science.gov (United States)

    Daga, Kailash; Pallavi, V; Patel, Dharmendra

    2011-10-01

    Treatment technologies needed to reduce the pollutant load of chemical industry effluent have been found to involve exorbitantly high costs. The present investigation aimed to treat the wastewater from chemical industry by cost effective sequential anaerobic-adsorption treatment. Wastewaters from chemical industry that are rich in biodegradable organics are tested for anaerobic treatability. The efficiency of anaerobic reactor is relatively lower 79.3%, and therefore post treatment of effluent was done by adsorption using Poly vinyl alcohol coated Datura stramonium (PVAC-DS) as an adsorbent. An overall COD removal of 93.8 % was achieved after sequential Anaerobic-Adsorption treatment, which lead to a better final effluent and a more economical treatment system.

  1. Industrial Holography Combined With Image Processing

    Science.gov (United States)

    Schorner, J.; Rottenkolber, H.; Roid, W.; Hinsch, K.

    1988-01-01

    Holographic test methods have gained to become a valuable tool for the engineer in research and development. But also in the field of non-destructive quality control holographic test equipment is now accepted for tests within the production line. The producer of aircraft tyres e. g. are using holographic tests to prove the guarantee of their tyres. Together with image processing the whole test cycle is automatisized. The defects within the tyre are found automatically and are listed on an outprint. The power engine industry is using holographic vibration tests for the optimization of their constructions. In the plastics industry tanks, wheels, seats and fans are tested holographically to find the optimum of shape. The automotive industry makes holography a tool for noise reduction. Instant holography and image processing techniques for quantitative analysis have led to an economic application of holographic test methods. New developments of holographic units in combination with image processing are presented.

  2. Integrating sustainability with business strategy – the Swedish chemical industry

    OpenAIRE

    Larsson, Robert

    2008-01-01

    This thesis aims to investigate perceptions of sustainability in relation to business strategy within the Swedish chemical industry. To this end, a survey was distributed with the assistance of industry organization Plast- och Kemiföretagen to companies that are part of the Responsible Care® program. A second purpose of the study is to explore critical factors when implementing an integration of sustainability with business strategy. To do this as well as dig deeper into a couple of questions...

  3. An Exploratory Study of The Malaysian Chemical Industry

    OpenAIRE

    Lee, Chun Hooi

    2008-01-01

    With the force of globalization and huge product commoditization pressure in the Business-To-Business (B2B) markets, the B2B marketers have turn their attention to branding in order to tap the brand potential from their product and corporate name. The main objective of this dissertation is to explore the industrial brand value and B2B brand equity in the context of the Malaysian chemical industry. The industrial brand value is explored by using the pinwheel model proposed by Mudambi et al (19...

  4. Research on the Complexity of MMES in Chemical Process Industry%化工过程工业中人-机-环境系统的复杂性研究

    Institute of Scientific and Technical Information of China (English)

    沈小平; 孙东川; 张振刚

    2002-01-01

    This paper, applying the idea of system and the thought of metasynthesis, researches on the manmachineenvironment system (MMES) that makes up of three elements of man, machine and environment in chemical process industry. The token of the complexity of MMES is discussed from its composing, framework, function, and characteristic. At the same time, the methodology of researching on the MMES is discussed based on Humachine.%用系统的观念和综合集成的思想研究了化工过程工业中人、机、环境三要素构成的人-机-环境系统,从系统的组成、结构、功能和特性方面探讨了人-机-环境系统的复杂性表征,同时,基于人机一体化的思想讨论了人-机-环境系统的研究方法论.

  5. Microprocessor systems for industrial process control

    Science.gov (United States)

    Lesh, F. H.

    1980-01-01

    Six computers operate synchronously and are interconnected by three independent data buses. Processors control one subsystem. Some can control buses to transfer data at 1 megabit per second. Every 2.5 msec each processor examines list of things to do during next interval. This spacecraft control system could be adapted for controlling complex industrial processes.

  6. Exergy analysis in industrial food processing

    NARCIS (Netherlands)

    Zisopoulos, F.K.

    2016-01-01

    The sustainable provision of food on a global scale in the near future is a very serious challenge. This thesis focuses on the assessment and design of sustainable industrial food production chains and processes by using the concept of exergy which is an objective metric based on the first and secon

  7. New Developments in Thermo-Chemical Diffusion Processes

    Institute of Scientific and Technical Information of China (English)

    Bernd Edenhofer

    2004-01-01

    Thermo-chemical diffusion processes like carburising, nitriding and boronizing play an important part in modern manufacturing technologies. They exist in many varieties depending on the type of diffusing element used and the respective process procedure. The most important industrial heat treatment process is case-hardening, which consists of thermochemical diffusion process carburising or its variation carbonitriding, followed by a subsequent quench. The latest developments of using different gaseous carburising agents and increasing the carburising temperature are one main area of this paper. The other area is the evolvement of nitriding and especially the ferritic nitrocarburising process by improved process control and newly developed process variations using carbon, nitrogen and oxygen as diffusing elements in various process steps. Also boronizing and special thermo-chemical processes for stainless steels are discussed.

  8. Polymers used in papermaking industry process

    OpenAIRE

    Guo, Rui; Wang, Yang

    2014-01-01

    This thesis is accomplished in Tampere University of Applied Sciences. Polymers used in paper making process are discussed in this thesis. This thesis is divided into two parts. One part lists polymers applied in different sections on a paper machine. Another part is about polymers in paper grades. Mainly used polymers in papermaking industry process are listed below: Polyethylene, known as PE, is used in extrusion coating and lamination. Products like film, packaging bags, containers ...

  9. Local learning processes in Malaysian industry

    DEFF Research Database (Denmark)

    Wangel, Arne

    1999-01-01

    Local learning processes are a vital part of any dynamic assimilation of transferred technology. The paper raises the question about the interaction between the training paradigms, which transnational corporations introduce in their subsidiaries in Malaysia and the specific basis for learning...... of Malaysian labour. Experiences from Malaysian industry indicate that local learning processes are shaped, among other things, by the concept of knowledge in a particular training programme, labour market structures, and learning cultures....

  10. Top 100 of China's Petroleum and Chemical Industry

    Institute of Scientific and Technical Information of China (English)

    CPCIA

    2007-01-01

    @@ According to the statistic report of the National Bureau of Statistics of China, there are 24 159 scaled companies (all state-owned companies, and non-state-owned companies those have achieved a main business revenue of over RMB5 million for the fiscal 2005) nationwide majored in petroleum and chemical industry in 2006.

  11. Estimation of competitiveness of enterprises of chemical industry: methodical aspects

    Directory of Open Access Journals (Sweden)

    M.V. Kasatkina

    2011-10-01

    Full Text Available Existent approaches and methods of estimation of competitiveness of enterprise are considered. Thrown out suggestions about level classification of descriptions of competitiveness. Offered to recommendation on perfection of estimation of competitiveness of enterprises of chemical industry taking into account the specific of their activity.

  12. Radiation protection in the pharmaceutical-chemical industry

    International Nuclear Information System (INIS)

    Some aspects of the use of ionizing radiation in research in the pharmaceutical and chemical industries will be discussed, the emphasis being placed on the handling of open radioactive materials in research laboratories. The compliance with official regulations and the preparation of company internal radiation protection regulations are described. 1 tab., 9 refs

  13. Process integration and opportunity for heat pumps in industrial processes

    OpenAIRE

    Becker, Helen; Maréchal, François; Vuillermoz, Aurélie

    2009-01-01

    Process integration methods allow one optimizing industrial processes. The main goals are decreasing energy demand and operating costs as well as reduction of pollutants emissions. High fuel costs promote installation of heat pumps. In a heat pump process waste energy is valorized by electrical power to produce higher quality energy. That is used to satisfy a part of the process demand so that less fuel is required and CO2 emission will decrease. This paper presents a methodology, based...

  14. Application of activated sludge process followed by physical-chemical processes in the treatment of industrial saline effluent for reuse - doi: 10.4025/actascitechnol.v35i2.13006

    Directory of Open Access Journals (Sweden)

    Milene Carvalho Bongiovani

    2013-04-01

    Full Text Available The treatment of complex effluent with high salinity and sometimes with toxicity rates from a chemical plant is investigated. Two reactors were monitored continuously: control reactor R1 and reactor R2 adapted for saline effluent with 25h-HRT. The adaptation process to saline effluent (0 - 100% was effective in removing COD and N-NH4+, respectively with 70 and 85% efficiency. After adaptation, the sequence coagulation/flocculation (40 mg L-1 PAC coagulant and 0.3 mg L-1 cationic polymer, rapid downflow sand filter (120 m3 m-2 day and reverse osmosis to obtain water for reuse was analyzed. Results obtained by coagulation/flocculation and sand filter sequence were satisfactory, mainly with the removal rates of turbidity at 50-65 and 98%, respectively. Average removals of 91, 87, 98 and 98% were obtained for COD, N-NH4+, TOC and Cl-, respectively, in reverse osmosis, with all parameters below the limits for reuse in cooling towers. However, membrane fouling was detected.  

  15. Industrialization of radiation-induced emulsion polymerization - technological process and its advantages

    International Nuclear Information System (INIS)

    A technological process for industrialization of radiation induced emulsion polymerization was introduced briefly. A batch process rather than a continuous one was adopted in the industrial-scale production. The advantages of radiation induced emulsion polymerization were described in comparison with chemical initiated process. (author)

  16. Fuzzy Control in the Process Industry

    DEFF Research Database (Denmark)

    Jantzen, Jan; Verbruggen, Henk; Østergaard, Jens-Jørgen

    1999-01-01

    Control problems in the process industry are dominated by non-linear and time-varying behaviour, many inner loops, and much interaction between the control loops. Fuzzy controllers have in some cases nevertheless mimicked the control actions of a human operator. Simple fuzzy controllers can...... be designed starting from PID controllers, and in more complex cases these can be used in connection with model-based predictive control. For high level control and supervisory control several simple controllers can be combined in a priority hierarchy such as the one developed in the cement industry...

  17. Impact of synthetic biology and metabolic engineering on industrial production of fine chemicals.

    Science.gov (United States)

    Jullesson, David; David, Florian; Pfleger, Brian; Nielsen, Jens

    2015-11-15

    Industrial bio-processes for fine chemical production are increasingly relying on cell factories developed through metabolic engineering and synthetic biology. The use of high throughput techniques and automation for the design of cell factories, and especially platform strains, has played an important role in the transition from laboratory research to industrial production. Model organisms such as Saccharomyces cerevisiae and Escherichia coli remain widely used host strains for industrial production due to their robust and desirable traits. This review describes some of the bio-based fine chemicals that have reached the market, key metabolic engineering tools that have allowed this to happen and some of the companies that are currently utilizing these technologies for developing industrial production processes.

  18. Impact of synthetic biology and metabolic engineering on industrial production of fine chemicals

    DEFF Research Database (Denmark)

    Jullesson, David; David, Florian; Pfleger, Brian;

    2015-01-01

    Industrial bio-processes for fine chemical production are increasingly relying on cell factories developed through metabolic engineering and synthetic biology. The use of high throughput techniques and automation for the design of cell factories, and especially platform strains, has played...... chemicals that have reached the market, key metabolic engineering tools that have allowed this to happen and some of the companies that are currently utilizing these technologies for developing industrial production processes....... an important role in the transition from laboratory research to industrial production. Model organisms such as Saccharomyces cerevisiae and Escherichia coli remain widely used host strains for industrial production due to their robust and desirable traits. This review describes some of the bio-based fine...

  19. CHALLENGES FOR PROCESS INDUSTRIES IN RECYCLING

    Institute of Scientific and Technical Information of China (English)

    Lothar Reh

    2006-01-01

    Increasing population and individual wealth have led to a higher demand for energy and raw material resources as well as for steady improvement of processing technology in view of efficient use of resources and avoiding emissions in production and recycling processes. Present situation and future trend of recycling processing are discussed by examples from the aluminium and steel industries, recycling of cars and post-consumer municipal recovery.The importance of more intense observance of thermodynamic laws and of a 4E strategy "Economy, Energy, Environment and Education" is outlined.

  20. A methodology for overall consequence modeling in chemical industry

    International Nuclear Information System (INIS)

    Risk assessment in chemical process industry is a very important issue for safeguarding human and the ecosystem from damages caused to them. Consequence assessment is an integral part of risk assessment. However, the commonly used consequence estimation methods involve time-consuming complex mathematical models and simple assimilation of losses without considering all the consequence factors. This lead to the deterioration of quality of estimated risk value. So, the consequence modeling has to be performed in detail considering all major losses with optimal time to improve the decisive value of risk. The losses can be broadly categorized into production loss, assets loss, human health and safety loss, and environment loss. In this paper, a conceptual framework is developed to assess the overall consequence considering all the important components of major losses. Secondly, a methodology is developed for the calculation of all the major losses, which are normalized to yield the overall consequence. Finally, as an illustration, the proposed methodology is applied to a case study plant involving benzene extraction. The case study result using the proposed consequence assessment scheme is compared with that from the existing methodologies.

  1. Evolution of the radiation processing industry

    Energy Technology Data Exchange (ETDEWEB)

    Cleland, Marshall R. [IBA Industrial, Inc., 151 Heartland Boulevard, Edgewood, NY 11717 (United States)

    2013-04-19

    Early investigations of the effects of treating materials with ionizing radiations began in 1894 with the irradiation of gases at atmospheric pressure using cathode rays from a Crookes gas-discharge tube, in 1895 with the discovery of X-rays emitted from a Crookes tube, and in 1896 with the discovery of radioactivity in uranium. In 1897, small electrically charged particles were detected and identified in the gas discharges inside Crookes tubes. These particles were then named electrons. During the next three decades, it was found that these novel forms of energy could produce ions to initiate chemical reactions in some gases and liquids. By 1921, it had also been shown that insects, parasites and bacteria could be killed by treatment with ionizing radiation. In 1925, a high-vacuum tube with a thermionic cathode and a thin metallic anode was developed to produce electron beams in air by using accelerating potentials up to 250 kilovolts. That unique apparatus was the precursor of the many types of electron accelerators that have been developed since then for a variety of industrial applications. In 1929, the vulcanization of natural rubber without using any chemical additives was achieved by irradiation with electrons from a 250 kilovolt accelerator. In 1939, several liquid monomers were polymerized by treatment with gamma rays from radioactive nuclides. These early results were not exploited before the end of World War II because intense sources of ionizing radiation were not available then. Shortly after that war, there was increased interest in developing the peaceful uses of atomic energy, which included the chemical and biological effects of radiation exposures. Many uses that have been developed since then are described briefly in this paper. These industrial applications are now producing billions of US dollars in revenue every year.

  2. China Aluminum Processing Industry Development Report 2011

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>In 2011,China’s aluminum processing industry maintained a high growth rate,with the aluminum output reaching 23,456,000tons,up 20.6% y-o-y.Overshadowed by complicated situation both at home and abroad,China’seconomy slowed down and declined by2.2% y-o-y.In 2011,China’s aluminum processing industry showed a downward tendency,that is,it grew at a high speed before the3rd quarter,but suffered from a shortage of orders in the remaining time of the year and the growth rate fell increasingly.Between January and August,China’s aluminum output rose by 26% y-o-y;

  3. Conceptual Design of Industrial Process Displays

    DEFF Research Database (Denmark)

    Pedersen, C.R.; Lind, Morten

    1999-01-01

    by a simple example from a plant with batch processes. Later the method is applied to develop a supervisory display for a condenser system in a nuclear power plant. The differences between the continuous plant domain of power production and the batch processes from the example are analysed and broad...... design method that matches the industrial practice of modular plant design and satisfies the needs of reusability of display design solutions. The main considerations in display design in the industry are to specify the operator's activities in detail, to extract the information the operators need from...... the plant design specification and documentation, and finally to present this information. The form of the display is selected from existing standardized display elements such as trend curves, mimic diagrams, ecological interfaces, etc. Further knowledge is required to invent new display elements. That is...

  4. Chemical production processes and systems

    Science.gov (United States)

    Holladay, Johnathan E.; Muzatko, Danielle S.; White, James F.; Zacher, Alan H.

    2014-06-17

    Hydrogenolysis systems are provided that can include a reactor housing an Ru-comprising hydrogenolysis catalyst and wherein the contents of the reactor is maintained at a neutral or acidic pH. Reactant reservoirs within the system can include a polyhydric alcohol compound and a base, wherein a weight ratio of the base to the compound is less than 0.05. Systems also include the product reservoir comprising a hydrogenolyzed polyhydric alcohol compound and salts of organic acids, and wherein the moles of base are substantially equivalent to the moles of salts or organic acids. Processes are provided that can include an Ru-comprising catalyst within a mixture having a neutral or acidic pH. A weight ratio of the base to the compound can be between 0.01 and 0.05 during exposing.

  5. Enhanced formulations for neutralization of chemical, biological and industrial toxants

    Science.gov (United States)

    Tucker, Mark D [Albuqueque, NM

    2008-06-24

    An enhanced formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The enhanced formulation according to the present invention is non-toxic and non-corrosive and can be delivered by a variety of means and in different phases. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator and water.

  6. Technical evaluation on some chemical exchange process for uranium enrichment

    International Nuclear Information System (INIS)

    In CEA in France, Asahi Chemical Industry Co., Ltd., in Japan and others, the industrialization of the uranium enrichment by chemical processes has been studied independently for ten years, using large amount of research expenses. In this study, technological examination was carried out on such processes and their separation characteristics, based on the published literatures. As the results, it was recognized that they have sufficient separation capability to aim at the industrialization, and the power required can be limited relatively low. However, very precise plant design and operation control system are required for them, and it is necessary to watch the future course to carry out the objective evaluation of the economic efficiency. The electric power has become a dominant factor in the production cost of enriched uranium. The separation of uranium isotopes with anion exchange resin being developed by Asahi Chemical Industry Co., Ltd., and the isotope separation by electron exchange using solvent extraction method being developed by CEA in France are introduced. Though the equilibrium separation factor is very small, they utilize reversible processes, and have the possibility of large power reduction and the cost reduction due to scaling-up. (Kako, I.)

  7. Chemical Processing Department monthly report, October 1965

    Energy Technology Data Exchange (ETDEWEB)

    1965-11-22

    This report, from the Chemical Processing Department at HAPO, discusses the following: production operation; purex and redox operation; finished products operation; maintenance; financial operations; facilities engineering; research; and employee relations.

  8. Chemical Processing Department monthly report, February 1963

    Energy Technology Data Exchange (ETDEWEB)

    1963-03-21

    This report, for February 1963 from the Chemical Processing Department at HAPO, discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations; facilities engineering; research; employee relations; weapons manufacturing operation; and safety and security.

  9. Chemical Processing Department monthly report, December 1963

    Energy Technology Data Exchange (ETDEWEB)

    1964-01-22

    This report, for December 1963 from the Chemical Processing Department at HAPO, discusses the following: Production operation; Purex and Redox operation; Financial operations; facilities engineering; research; and employee relations. Weapons manufacturing operation; and safety and security.

  10. Chemical Processing Department monthly report, June 1958

    Energy Technology Data Exchange (ETDEWEB)

    1958-07-22

    This report for June 1958, from the Chemical Processing Department at HAPO, discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations; facilities engineering; research; and employee relations.

  11. Chemical Processing Department monthly report, October 1962

    Energy Technology Data Exchange (ETDEWEB)

    1962-11-21

    This report, from the Chemical Processing Department at HAPO, for October, 1962 discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations; facilities engineering; research; employee relations; and weapons manufacturing operation.

  12. Chemical Processing Division monthly report, September 1966

    Energy Technology Data Exchange (ETDEWEB)

    Warren, J.H.

    1966-10-21

    This report, from the Chemical Processing Department at HAPO for September 1966, discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations; facilities engineering; research; and employee-relations, and waste management.

  13. Chemical Processing Department monthly report, October 1963

    Energy Technology Data Exchange (ETDEWEB)

    Young, J. F.; Johnson, W. E.; Reinker, P. H.; Warren, J. H.; McCullugh, R. W.; Harmon, M. K.; Gartin, W. J.; LaFollette, T. G.; Shaw, H. P.; Frank, W. S.; Grim, K. G.; Warren, J. H.

    1963-11-21

    This report, for October 1963 from the Chemical Processing Department at HAPO, discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations; facilities engineering; research; employee relations; weapons manufacturing operation; and safety and security.

  14. The National Toxicology Program chemical nomination selection and testing process.

    Science.gov (United States)

    Heindel, J J

    1988-01-01

    The NTP is an interagency program of the Federal Government which coordinates toxicological programs at the NIH (NIEHS), FDA (NCTR), and CDC (NIOSH) with input from NCI, NIH, OSHA, CPSC, EPA, and ATSDR. The NTP has the capability to completely characterize the toxicologic profile of a chemical, including studies of chemical disposition, genetic toxicity, immunotoxicity, teratology, reproductive toxicity, carcinogenicity, neurotoxicity, and specific organ toxicity. The NTP encourages nominations of chemicals of human health concern from all sectors of the public, including industry, labor, and the general public. The specific process of nomination, evaluation, and selection of chemicals for testing by the NTP is described. It is a multicomponent system with several evaluations and a public peer review step to assure adequate consideration of all nominated chemicals. The results of NTP studies are all peer reviewed and available to the general public as well as to the scientific community. PMID:2980357

  15. EDITORIAL: Sixth World Congress on Industrial Process Tomography (WCIPT6) Sixth World Congress on Industrial Process Tomography (WCIPT6)

    Science.gov (United States)

    Takei, Masahiro; Xu, Lijun

    2011-10-01

    We are pleased to publish this special feature on the Sixth World Congress on Industrial Process Tomography (WCIPT6) in Measurement Science and Technology. The international congress was successfully held in the campus of Beihang University, Beijing, China, from 6-9 September 2010. It was jointly organized by International Society for Industrial Process Tomography (ISIPT), North China Electric Power University (NCEPU) and Beihang University (BUAA). Process tomography is a tangible tool to visualize and determine the material distribution inside a process non-intrusively in real time. The internal features that can be monitored by process tomography are frequently encountered and required in the design of processes and industrial plants in the fields of chemical, oil, power and metallurgical engineering as well as many other activities such as food, material handling and combustion systems. One of the key characteristics of process tomography is to provide a direct impression and instant and clear understanding of a complex phenomenon. From the viewpoint of practical applications, industries all over the world are currently facing a number of daunting challenges including many wide-range and complex technical problems. The innovative technology of process tomography consistently contributes to providing better and better solutions to the problems as 'seeing is believing'. As a regular event, WCIPT is playing a more and more important role in addressing the challenges to overcome these problems. We are glad to see that this special feature provides a great opportunity for world-wide top-level researchers to discuss and make further developments in process tomography and its applications. The 20 articles included in this issue cover a wide range of relevant topics including sensors and sensing mechanisms, data acquisition systems and instrumentation, electrical, optical, acoustic and hybrid systems, image reconstruction and system evaluation, data and sensor fusion

  16. Modeling heterogeneous chemical processes on aerosol surface

    Institute of Scientific and Technical Information of China (English)

    Junjun Deng; Tijian Wang; Li Liu; Fei Jiang

    2010-01-01

    To explore the possible impact of heterogeneous chemical processes on atmospheric trace components,a coupled box model including gas-phase chemical processes,aerosol thermodynamic equilibrium processes,and heterogeneous chemical processes on the surface of dust,black carbon(BC)and sea salt is set up to simulate the effects of heterogeneous chemistry on the aerosol surface,and analyze the primary factors affecting the heterogeneous processes.Results indicate that heterogeneous chemical processes on the aerosol surface in the atmosphere will affect the concentrations of trace gases such as H2O2,HO2,O3,NO2,NO3,HNO3 and SO2,and aerosols such as SO42-,NO3-and NH4+.Sensitivity tests suggest that the magnitude of the impact of heterogeneous processes strongly depends on aerosol concentration and the surface uptake coefficients used in the box model.However,the impact of temperature on heterogeneous chemical processes is considerably less.The"renoxification"of HNO3 will affect the components of the troposphere such as nitrogen oxide and ozone.

  17. Gas Turbine Ontology for the Industrial Processes

    Directory of Open Access Journals (Sweden)

    F. Z. Laallam

    2007-01-01

    Full Text Available The activity of supervision and control of the industrial processes is a very complex spot and require a great experiment because of the dynamic characteristics of the process. This experiment was acquired with the passing of years. What makes departure of an expert in retirement a great loss of the know-how. The problem thus consists to capture this know-how and allows experiment to be cumulate with an aim of construction of an enterprise memory. We propose an approach based on ontology to capture this know-how. In the dynamic situations are distinguished three classes from situations: situations of normal walk, situations of degraded walk and situations of incidental walk. The work presented in this article, was developed in the division of production at SONATRACH. It relates to the supervision and the control of the industrial process of a compressor station witch constitutes a typical case of dynamic situation. Among the three classes of quoted dynamic situations, we concentrate on the situations of degraded walk. These situations of nature different compared to the usual situations from normal walk, subject the operator to a workload at the same time complex and stressing. The work presented in this article enters within the framework of a doctoral project whose the principal objective was the development of an intelligent system of expertise and of decision-making aid in the domain of the industrial maintenance for the compression stations. It relates to ontological engineering and more particularly the use of ontologies in the knowledge-based systems. We try in this work to build an ontology concerning the domain of the industrial maintenance. This ontology was not operational yet because it does not included mechanisms of reasoning. It was independent of any context of use.

  18. Probabilistic safety assessment in the chemical and nuclear industries

    CERN Document Server

    Fullwood, Ralph R

    2000-01-01

    Probabilistic Safety Analysis (PSA) determines the probability and consequences of accidents, hence, the risk. This subject concerns policy makers, regulators, designers, educators and engineers working to achieve maximum safety with operational efficiency. Risk is analyzed using methods for achieving reliability in the space program. The first major application was to the nuclear power industry, followed by applications to the chemical industry. It has also been applied to space, aviation, defense, ground, and water transportation. This book is unique in its treatment of chemical and nuclear risk. Problems are included at the end of many chapters, and answers are in the back of the book. Computer files are provided (via the internet), containing reliability data, a calculator that determines failure rate and uncertainty based on field experience, pipe break calculator, event tree calculator, FTAP and associated programs for fault tree analysis, and a units conversion code. It contains 540 references and many...

  19. Reactive formulations for a neutralization of toxic industrial chemicals

    Science.gov (United States)

    Tucker, Mark D.; Betty, Rita G.

    2006-10-24

    Decontamination formulations for neutralization of toxic industrial chemicals, and methods of making and using same. The formulations are effective for neutralizing malathion, hydrogen cyanide, sodium cyanide, butyl isocyanate, carbon disulfide, phosgene gas, capsaicin in commercial pepper spray, chlorine gas, anhydrous ammonia gas; and may be effective at neutralizing hydrogen sulfide, sulfur dioxide, formaldehyde, ethylene oxide, methyl bromide, boron trichloride, fluorine, tetraethyl pyrophosphate, phosphorous trichloride, arsine, and tungsten hexafluoride.

  20. Reproductive effects in birds exposed to pesticides and industrial chemicals.

    OpenAIRE

    Fry, D M

    1995-01-01

    Environmental contamination by agricultural chemicals and industrial waste disposal results in adverse effects on reproduction of exposed birds. The diversity of pollutants results in physiological effects at several levels, including direct effects on breeding adults as well as developmental effects on embryos. The effects on embryos include mortality or reduced hatchability, failure of chicks to thrive (wasting syndrome), and teratological effects producing skeletal abnormalities and impair...

  1. Profit of Chemical Fibre Industry Surges on Efficiency Improvement

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    According to data collected from 1935 statistics-worthy Chinese chemical fibre enterprises surveyed by National Bureau of Statistics of China, the total profits reached CNY8.066 billion in Jan. -May, 2010, up 200.08 per cent y/y, 234.78 percentage points higher than the Jan.-May 2009 period. Technology improvement and industrial structural adjustment played a very major role on profi t growth.

  2. Hierarchical Nanoceramics for Industrial Process Sensors

    Energy Technology Data Exchange (ETDEWEB)

    Ruud, James, A.; Brosnan, Kristen, H.; Striker, Todd; Ramaswamy, Vidya; Aceto, Steven, C.; Gao, Yan; Willson, Patrick, D.; Manoharan, Mohan; Armstrong, Eric, N., Wachsman, Eric, D.; Kao, Chi-Chang

    2011-07-15

    This project developed a robust, tunable, hierarchical nanoceramics materials platform for industrial process sensors in harsh-environments. Control of material structure at multiple length scales from nano to macro increased the sensing response of the materials to combustion gases. These materials operated at relatively high temperatures, enabling detection close to the source of combustion. It is anticipated that these materials can form the basis for a new class of sensors enabling widespread use of efficient combustion processes with closed loop feedback control in the energy-intensive industries. The first phase of the project focused on materials selection and process development, leading to hierarchical nanoceramics that were evaluated for sensing performance. The second phase focused on optimizing the materials processes and microstructures, followed by validation of performance of a prototype sensor in a laboratory combustion environment. The objectives of this project were achieved by: (1) synthesizing and optimizing hierarchical nanostructures; (2) synthesizing and optimizing sensing nanomaterials; (3) integrating sensing functionality into hierarchical nanostructures; (4) demonstrating material performance in a sensing element; and (5) validating material performance in a simulated service environment. The project developed hierarchical nanoceramic electrodes for mixed potential zirconia gas sensors with increased surface area and demonstrated tailored electrocatalytic activity operable at high temperatures enabling detection of products of combustion such as NOx close to the source of combustion. Methods were developed for synthesis of hierarchical nanostructures with high, stable surface area, integrated catalytic functionality within the structures for gas sensing, and demonstrated materials performance in harsh lab and combustion gas environments.

  3. The JMB Applied Chemistry Syllabus--the Place of Case Studies and Industrial Processes

    Science.gov (United States)

    Hallas, G.; Hughes, W. J.

    1974-01-01

    Describes two novel topics in the JMB Applied Chemistry Core Syllabus. These are the social and economic aspects of chemical technology, involving the use of six case studies, and industrial processes. (Author/GS)

  4. Undisclosed chemicals--implications for risk assessment: a case study from the mining industry.

    Science.gov (United States)

    Singh, Khareen; Oates, Christopher; Plant, Jane; Voulvoulis, Nikolaos

    2014-07-01

    Many of the chemicals used in industry can be hazardous to human health and the environment, and some formulations can have undisclosed ingredients and hazards, increasing the uncertainty of the risks posed by their use. The need for a better understanding of the extent of undisclosed information in chemicals arose from collecting data on the hazards and exposures of chemicals used in typical mining operations (copper, platinum and coal). Four main categories of undisclosed chemicals were defined (incomplete disclosure; chemicals with unspecific identities; relative quantities of ingredients not stated; and trade secret ingredients) by reviewing material safety data sheet (MSDS) omissions in previous studies. A significant number of chemicals (20% of 957 different chemicals) across the three sites had a range of undisclosed information, with majority of the chemicals (39%) having unspecific identities. The majority of undisclosed information was found in commercially available motor oils followed by cleaning products and mechanical maintenance products, as opposed to reagents critical to the main mining processes. All three types of chemicals had trade secrets, unspecific chemical identities and incomplete disclosures. These types of undisclosed information pose a hindrance to a full understanding of the hazards, which is made worse when combined with additional MSDS omissions such as acute toxicity endpoints (LD50) and/or acute aquatic toxicity endpoints (LC50), as well as inadequate hazard classifications of ingredients. The communication of the hazard information in the MSDSs varied according to the chemical type, the manufacturer and the regulations governing the MSDSs. Undisclosed information can undermine occupational health protection, compromise the safety of workers in industry, hinder risk assessment procedures and cause uncertainty about future health. It comes down to the duty of care that industries have towards their employees. With a wide range of

  5. Solar energy for agricultural and industrial process heat

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-22

    A state-of-the-art review of solar process heat is given; near term prospects are discussed; and the federal solar industrial process heat program is reviewed. Existing solar industrial process heat projects are tabulated. (WHK)

  6. An Empirical Analysis of Process Industry Transformation Systems

    OpenAIRE

    Daina Dennis; Jack Meredith

    2000-01-01

    Process industries share many characteristics because their transformation systems are designed for nondiscrete materials. Hence, the process industries typically are lumped together in a general group and contrasted from the discrete industries as a whole. The result is a poor understanding of the differences between distinct types of process industries. In this article, 19 different process industry sites are analyzed for the purpose of identifying the key differences between their transfor...

  7. Chemical Processing Department monthly report, November 1956

    Energy Technology Data Exchange (ETDEWEB)

    1956-12-21

    The November 1956 monthly report for the Chemical Processing Department of Hanford Atomic Products Operation includes information regarding research and engineering efforts with respect to the Purex and Redox process technology. Also discussed was the production operation, finished product operation, power and general maintenance, financial operation, engineering and research operations, and employee operations. (MB)

  8. Chemical Processing Department monthly report, July 1958

    Energy Technology Data Exchange (ETDEWEB)

    1958-08-22

    The July, 1958 monthly report for the Chemical Processing Department of the Hanford Atomic Products Operation includes information regarding research and engineering efforts with respect to the Purex and Redox process technology. Also discussed is the production operation, finished product operation, power and general maintenance, financial operation, engineering and research operations, and employee operation. (MB)

  9. Chemical Processing Department monthly report, May 1958

    Energy Technology Data Exchange (ETDEWEB)

    1958-06-20

    The May, 1956 monthly report for the Chemical Processing Department of Hanford Atomic Products Operation includes information regarding research and engineering efforts with respect to the Purex and Redox process technology. Also discussed is the production operation, finished products operation, power and general maintenance, financial operation, engineering and research operations, and employee operations. (MB)

  10. Chemical Processing Department monthly report, February 1958

    Energy Technology Data Exchange (ETDEWEB)

    1958-03-21

    The February, 1958 monthly report for the Chemical Processing Department of the Hanford Atomic Products Operation includes information regarding research and engineering efforts with respect to the Purex and Redox process technology. Also discussed is the production operation, finished product operation, power and general maintenance, financial operation, engineering and research operations, and employee operation. (MB)

  11. Chemical Processing Department monthly report, May 1957

    Energy Technology Data Exchange (ETDEWEB)

    1957-06-21

    The May, 1957 monthly report for the Chemical Processing Department of the Hanford Atomic Products Operation includes information regarding research and engineering efforts with respect to the Purex and Redox process technology. Also discussed is the production operation, finished product operation, power and general maintenance, financial operation, engineering and research operations, and employee operation.(MB)

  12. Process safety management for highly hazardous chemicals

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    Purpose of this document is to assist US DOE contractors who work with threshold quantities of highly hazardous chemicals (HHCs), flammable liquids or gases, or explosives in successfully implementing the requirements of OSHA Rule for Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119). Purpose of this rule is to prevent releases of HHCs that have the potential to cause catastrophic fires, explosions, or toxic exposures.

  13. Prospects of Applying Feed Processing Technologies Based on Industrial Plantation

    Directory of Open Access Journals (Sweden)

    Simon Petrus Ginting

    2012-06-01

    Full Text Available The potency of plantation sectors (palm oil, sugar cane and cacao as alternative feed resources for ruminants has been acknowledged since 20 – 25 years ago. However, the level of utilization of these feeds in small ruminant production system has been very low and sporadic. The typical chemical and physical characteristics of most of those feedstuffs required some steps of processing in order to improve their nutritional quality and to ease their handling. Small ruminants, like sheep and goats have relatively higher metabolic energy requirement per kg BW and anatomically have lower gut capacity to process lignocelluose materials compared to large ruminants. It is, therefore, these animals nutritionally face more constraints in handling lignocellulose and bulky materials mostly found in industrial by products or crop-residues from plantations. Physical processes (chopping, phyiscal separation, hydrothermal, chemical processes (ammoniation, hydrolyses and oxidative treatments and bio-conversions (fermentation, ensiling have been recommended as alternative technologies in maximizing the utilization of those feedstuffs for small ruminant animals. The principal mechanisms of those treatments are: (i breaking the linkages between structural carbohydrate and lignin so that it could be easily digested by the animal enzyme systems and (ii preserving the material from being spoilage due to its high moisture content or for feed stocking purposes. Priorities for choosing the most effective processing technology for implementation or adoption is depent largely on the scale of feed production. Ammoniation, chopping, physical separation, ensiling or bio-conversion are several technologies mostly recommended for small scale operation in situ. These alternative technologies should be able to be adopted by small-holders living around the plantation area. The commercial or large scale feed production could be implemented by the plantation industry by giving high

  14. Gravity-Dependent Transport in Industrial Processes

    Science.gov (United States)

    Ostrach, Simon; Kamotani, Yasuhiro

    1996-01-01

    Gravity dependent transport phenomena in various industrial processes are investigated in order to indicate new directions for micro-gravity research that enhance the commercial success of the space program. The present article describes the commercialization possibilities of such topics associated with physicochemical transport phenomena. The topics are: coating flow, rotating electrochemical system, and convection in low Plandtl number fluids. The present study is directed to understand these phenomena, and to develop a knowledge base for their applications with emphasis to a micro-gravity environment.

  15. [The pharmaceutical industry in the industrial chemical group: the National Union of Chemical-Pharmaceutical Laboratories (1919-1936)].

    Science.gov (United States)

    Nozal, Raúl Rodríquez

    2011-01-01

    The pharmaceutical industry associations, as it happened with other businesses, had a significant rise during the dictatorship of Primo de Rivera and II Republic. The 'Cámara Nacional de Industrias Químicas', in Barcelona, represented the national chemical industry to its ultimate assimilation by the 'Organización Sindical' in 1939. In this association, matters relating to pharmaceutical products -- which we will especially deal with in this work -- were managed by the 'Unión Nacional de Laboratorios Químico-Farmacéuticos', which defended the interests of pharmaceutical companies in the presence of government authorities, using the resources and mechanisms also managed by business pressure groups. The inclusion of industrial pharmacy in the Chemical lobby separated the pharmaceutical industry from traditional exercise and its corporate environment. this created ups and downs, conflicts of interests and finally, love and hate relationships with their colleagues of the pharmacy work placement and, of course, with the association that represented them: the 'Unión Farmacéutica Nacional'.

  16. BIOMASS AS A RENEWABLE SOURCE OF CHEMICALS FOR INDUSTRIAL APPLICATIONS

    Directory of Open Access Journals (Sweden)

    Ahmed, M. Murtala

    2012-02-01

    Full Text Available Worldwide demand for cleaner burning fuels and ‘clean’ chemicals has been increasing from the global issues of environmental concern. This lead to a greater utilization of renewable resources to replace the old and existing fossil based feedstock for liquid fuels and chemicals. The ability to re-grow harvested biomass and recapture the carbon emitted to the atmosphere through photosynthesis allows the possibility of carbon neutrality encouraged the use of biomass. Moreso, the unstable rise of oil prices, the negative effects of petroleum on the environment and the advantages of biomass towards sustainability of resources accelerated the development and utilization of unused biomass. This paper reviewed some of the potentials of biomass as a source of chemicals for industrial applications. Pyrolysis is considered to be one of the most employed technologies for the conversion of biomass into bio-oil, char and gases. The utilization of biomass for chemical manufacture can significantly eliminate the harmful effects of fossil based chemicals on the environment.

  17. Chemical production from industrial by-product gases: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lyke, S.E.; Moore, R.H.

    1981-04-01

    The potential for conservation of natural gas is studied and the technical and economic feasibility and the implementation of ventures to produce such chemicals using carbon monoxide and hydrogen from byproduct gases are determined. A survey was performed of potential chemical products and byproduct gas sources. Byproduct gases from the elemental phosphorus and the iron and steel industries were selected for detailed study. Gas sampling, preliminary design, market surveys, and economic analyses were performed for specific sources in the selected industries. The study showed that production of methanol or ammonia from byproduct gas at the sites studied in the elemental phosphorus and the iron and steel industries is technically feasible but not economically viable under current conditions. Several other applications are identified as having the potential for better economics. The survey performed identified a need for an improved method of recovering carbon monoxide from dilute gases. A modest experimental program was directed toward the development of a permselective membrane to fulfill that need. A practical membrane was not developed but further investigation along the same lines is recommended. (MCW)

  18. Public relations and the radiation processing industry

    Energy Technology Data Exchange (ETDEWEB)

    Coates, T.D. (Nordion International Inc., Kanata, Ontario (Canada))

    1990-01-01

    The world's uneasiness and mistrust regarding anything nuclear has heightened in recent years due to events such as Chernobyl and Three Mile Island. Opinion polls and attitude surveys document the public's growing concern about issues such as the depletion of the ozone layer, the resulting greenhouse effect and exposure of our planet to cosmic radiation. Ultimately, such research reveals an underlying fear regarding the unseen impacts of modern technology on the environment and on human health. These concerns have obvious implications for the radiation processing industry, whose technology is nuclear based and not easily understood by the public. We have already seen organized nuclear opponents mobilize public anxiety, fear and misunderstanding in order to oppose the installation of radiation processing facilities and applications such as food irradiation. These opponents will no doubt try to strengthen resistance to our technology in the future. Opponents will attempt to convince the public that the risks to public and personal health and safety outweigh the benefits of our technology. We in the industry must head off any tendency for the public to see us as the ''enemy''. Our challenge is to counter public uneasiness and misunderstanding by effectively communicating the human benefits of our technology. (author).

  19. Public relations and the radiation processing industry

    Science.gov (United States)

    Coates, T. Donna

    The world's uneasiness and mistrust regarding anything nuclear has heightened in recent years due to events such as Chernobyl and Three Mile Island. Opinion polls and attitude surveys document the public's growing concern about issues such as the depletion of the ozone layer, the resulting greenhouse effect and exposure of our planet to cosmic radiation. Ultimately, such research reveals an underlying fear regarding the unseen impacts of modern technology on the environment and on human health. These concerns have obvious implications for the radiation processing industry, whose technology is nuclear based and not easily understood by the public. We have already seen organized nuclear opponents mobilize public anxiety, fear and misunderstanding in order to oppose the installation of radiation processing facilities and applications such as food irradiation. These opponents will no doubt try to strengthen resistance to our technology in the future. Opponents will attempt to convince the public that the risks to public and personal health and safety outweigh the benefits of our technology. We in the industry must head off any tendency for the public to see us as the "enemy". Our challenge is to counter public uneasiness and misunderstanding by effectively communicating the human benefits of our technology. Clearly it is a challenge we cannot afford to ignore.

  20. Laser isotope separation - a new class of chemical process

    International Nuclear Information System (INIS)

    Lasers may soon find several applications in chemical processing. The applications that have attracted the most research funding to date involve isotope separation for the nuclear industry. These isotopes have an unusually high value (≥$1000/kg) compared to bulk chemicals (∼$1/kg) and are generally required in very large quantities. In a laser isotope separation process, light is used to convert a separation that is very difficult or even impossible by conventional chemical engineering techniques to one that is readily handled by conventional separation technology. For some isotopes this can result in substantial capital and energy savings. A uranium enrichment process developed at the Lawrence Livermore National Laboratory is the closest to commercialization of the large scale laser isotope separation processes. Of particular interest to the Canadian nuclear industry are the laser separation of deuterium, tritium, zirconium-90 and carbon-14. In this paper, the basic principles behind laser isotope separation are reviewed and brief dscriptions of the more developed processes are given

  1. THE INDUSTRIAL UTILIZATION OF CHEMICAL MODIFIED AGRICULTURAL RESIDUES

    Institute of Scientific and Technical Information of China (English)

    Feng Xu; Runcang Sun; Huaiyu Zhan

    2004-01-01

    Various lignocellulosic materials such as wood,agricultural and forest residues has the potential to be valuable substitute for, or complement to,commercial sorbents for removing heavy metal ions or dyes from waste water or spilled oil from inland water or sea. More than 9 million tons of straw pulp are produced annually in china, which account for about 90% of the world′s total straw pulp. However,huge quantity of remain straw is not used as industrial raw material and is burnt in the fields or on the side of road. These resources can be chemical modified such as acetylation. Modified straws have the characteristics of low cost, high capacity, quick uptake, and easy to desorb. This paper reviews the current status of the technology for modified agricultural residues, which focus on hemicellulose and cellulose. The potential of these natural sorbents in main industry is also indicated.

  2. THE INDUSTRIAL UTILIZATION OF CHEMICAL MODIFIED AGRICULTURAL RESIDUES

    Institute of Scientific and Technical Information of China (English)

    FengXu; RuncangSun; HuaiyuZhan

    2004-01-01

    Various lignocellulosic materials such as wood, agricultural and forest residues has the potential to be valuable substitute for, or complement to, commercial sorbents for removing heavy metal ions or dyes from waste water or spilled oil from inland water or sea. More than 9 million tons of straw pulp are produced annually in china, which account for about 90% of the world's total straw pulp. However, huge quantity of remain straw is not used as industrial raw material and is burnt in the fields or on the side of road. These resources can be chemical modified such as acetylation. Modified straws have the characteristics of low cost, high capacity, quick uptake, and easy to desorb. This paper reviews the current status of the technology for modified agricultural residues, which focus on hemicellulose and cellulose. The potential of these natural sorbents in main industry is also indicated.

  3. Co-exposure with fullerene may strengthen health effects of organic industrial chemicals.

    Directory of Open Access Journals (Sweden)

    Maili Lehto

    Full Text Available In vitro toxicological studies together with atomistic molecular dynamics simulations show that occupational co-exposure with C60 fullerene may strengthen the health effects of organic industrial chemicals. The chemicals studied are acetophenone, benzaldehyde, benzyl alcohol, m-cresol, and toluene which can be used with fullerene as reagents or solvents in industrial processes. Potential co-exposure scenarios include a fullerene dust and organic chemical vapor, or a fullerene solution aerosolized in workplace air. Unfiltered and filtered mixtures of C60 and organic chemicals represent different co-exposure scenarios in in vitro studies where acute cytotoxicity and immunotoxicity of C60 and organic chemicals are tested together and alone by using human THP-1-derived macrophages. Statistically significant co-effects are observed for an unfiltered mixture of benzaldehyde and C60 that is more cytotoxic than benzaldehyde alone, and for a filtered mixture of m-cresol and C60 that is slightly less cytotoxic than m-cresol. Hydrophobicity of chemicals correlates with co-effects when secretion of pro-inflammatory cytokines IL-1β and TNF-α is considered. Complementary atomistic molecular dynamics simulations reveal that C60 co-aggregates with all chemicals in aqueous environment. Stable aggregates have a fullerene-rich core and a chemical-rich surface layer, and while essentially all C60 molecules aggregate together, a portion of organic molecules remains in water.

  4. Effects of gypsum ceramics industries residues on soil chemical propierties

    Directory of Open Access Journals (Sweden)

    Carlos Antonio Centurión Maciel

    2006-08-01

    Full Text Available Gypsum used as molds in ceramics industry must be replaced after some time of utilization becoming, thus, a waste product, a difficult final destination residue. This residue, however, is shown to be an industrial by-product with potential to be employed in agricultural acid soils as acidity amendment and nutrients source, especially of calcium, sulfur, magnesium and, in smaller degree, of potassium. This issue proposes to evaluate its utilization in agricultural soils as sustainable form out of environment aggressions. Increasing quantities of this gypsum waste were mixed to some acid soil, moistened and left in incubation during 15 days. After that, samples were air dried, sifted and analyzed in its chemical qualities. By the results, a quick and efficient reaction on soil acidity correction and growing liberation of his components (Ca, S, Mg and K could be inferred. It can be concluded that, whenever it is not possible its reutilization in ceramics industry, this residue can be placed in agricultural soils, since recommended quantities for soil acidity amendment are followed. Considering the modifications in soil chemical quality as acidity corrective and nutrients contents, this issue chose to verify some possible fitotoxic effects that may occur in the residue during the several industrial trials to which it is submitted, mainly when in contact with components that originated the ceramics pieces, responsible by loading it amendment action and Mg and K source. For such, lettuce was used as a plant test because of its sensitiveness to the presence of fitotoxic substances. They were put in pot tests with gypsum waste increasing quantities. A positive answer of vegetable production mass corresponding to 10 t ha-1 out of visual fitotoxic symptoms was evident.

  5. Chemical industry: Government regulations. (Latest citations from the NTIS bibliographic database). Published Search

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    The bibliography contains citations concerning government regulation effects on the chemical industry. Regulations pertaining to industrial wastes, energy consumption and conservation, and industrial emissions are discussed. Emission standards and control, toxic substances control, and economic impacts of regulations affecting the chemical industry are considered.(Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  6. A Novel Chemical Nitrate Destruction Process

    Energy Technology Data Exchange (ETDEWEB)

    Dziewinski, J.; Marczak, S.

    1999-03-01

    Nitrates represent one of the most significant pollutant discharged to the Baltic Sea by the Sliiamae hydrometallurgical plant. This article contains a brief overview of the existing nitrate destruction technologies followed by the description of a new process developed by the authors. The new chemical process for nitrate destruction is cost effective and simple to operate. It converts the nitrate to nitrogen gas which goes to the atmosphere.

  7. Synthesis and optimization of integrated chemical processes

    Energy Technology Data Exchange (ETDEWEB)

    Barton, Paul I.; Evans, Lawrence B.

    2002-04-26

    This is the final technical report for the project titled ''Synthesis and optimization of integrated chemical processes''. Progress is reported on novel algorithms for the computation of all heteroazeotropic compositions present in complex liquid mixtures; the design of novel flexible azeotropic separation processes using middle vessel batch distillation columns; and theory and algorithms for sensitivity analysis and numerical optimization of hybrid discrete/continuous dynamic systems.

  8. Advances in statistical monitoring of complex multivariate processes with applications in industrial process control

    CERN Document Server

    Kruger, Uwe

    2012-01-01

    The development and application of multivariate statistical techniques in process monitoring has gained substantial interest over the past two decades in academia and industry alike.  Initially developed for monitoring and fault diagnosis in complex systems, such techniques have been refined and applied in various engineering areas, for example mechanical and manufacturing, chemical, electrical and electronic, and power engineering.  The recipe for the tremendous interest in multivariate statistical techniques lies in its simplicity and adaptability for developing monitoring applica

  9. BRANDING PROCESS - FUNDAMENTAL PROCESS IN THE TEXTI LE INDUSTRY ORGANIZATIONS

    Directory of Open Access Journals (Sweden)

    PURCAREA Anca Alexandra

    2014-05-01

    Full Text Available More companies in textile industry organizations understand that in making a decision a key factor is the performance of organizational processes. Products are becoming more numerous and increasingly resemble each other.In this conditions the brand can make the difference in a highly competitive market. Both academic specialists and professionals believes that the brand has become an intangible capital of a company which ensures its long-term profitability. In a globalized economy brand break the barriers of space enabling the company to have a great vision, far beyond its reach. Methodology was based on a bibliographical research. The research has identified the major role that brands can play both for customers and manufacturers in the textile Industry organizations. In conclusion literature and experience has shown that large companies both brands operating in B2B markets and the B2C markets, have an increasingly higher for long-term competitive advantage.

  10. Improving industrial process control systems security

    CERN Document Server

    Epting, U; CERN. Geneva. TS Department

    2004-01-01

    System providers are today creating process control systems based on remote connectivity using internet technology, effectively exposing these systems to the same threats as corporate computers. It is becoming increasingly difficult and costly to patch/maintain the technical infrastructure monitoring and control systems to remove these vulnerabilities. A strategy including risk assessment, security policy issues, service level agreements between the IT department and the controls engineering groups must be defined. In addition an increased awareness of IT security in the controls system engineering domain is needed. As consequence of these new factors the control system architectures have to take into account security requirements, that often have an impact on both operational aspects as well as on the project and maintenance cost. Manufacturers of industrial control system equipment do however also propose progressively security related solutions that can be used for our active projects. The paper discusses ...

  11. Industry Operating Experience Process at Krsko NPP

    International Nuclear Information System (INIS)

    according to Corrective Action Program, which establishes guidance on the effective and efficient use of operating experience information to improve plant/personnel safety, plant reliability and commercial performance. The primary objectives of the Operating Experience Program are to promote the identification and transfer of lessons learned from internal and industry events to the plant personnel, and assure that such lessons are shared between Krsko NPP and the nuclear industry. The Operating Experience Program expects to prevent similar events from occurring at Krsko NPP by increasing plant personnel awareness of previous on-site and industry events and issues. Operating Experience Program should also identify and analyze weaknesses of the minor events and near misses in order to prevent occurrence of significant events. The purpose of this article is to present part of the Krsko NPP Operating Experience Program regarding to industry events. It will describe the methodology for receiving, processing, screening, reviewing, evaluating, status reporting, defining and implementing preventive/corrective actions in response to operating experience information of the events occurring off-site.(author).

  12. 27 CFR 19.67 - Spirits produced in industrial processes.

    Science.gov (United States)

    2010-04-01

    ... industrial processes. 19.67 Section 19.67 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Miscellaneous Provisions Activities Not Subject to This Part § 19.67 Spirits produced in industrial processes. (a) Applicability. (1) Persons who produce spirits in industrial processes (including...

  13. 滨海化工区废水预处理去毒技术耦合工艺研究%Study on Coupling Processes of Pre-treatment Techniques for Detoxification of Wastewater from Chemical Industry Park in Binhai New Area

    Institute of Scientific and Technical Information of China (English)

    王松; 郑先强; 石岩; 侯霙; 曾猛; 许丹宇

    2012-01-01

    Chemical industry is an important pillar industry in Tianjin Binhai New Area,wastewater from that industry is main threat to pollution control in that area,as it has non-biodegradable and other characteristics.To solve the problem in single conventional method,actual wastewater from a chemical industry park in Binhai New Area was selected,4 coupling pretreatment processes for detoxication,namely Internal Electrolysis-Fenton(IEF),Internal Electrolysis-Coagulation(IEC),Internal Electrolysis-Ultrasonic(IEU) and Microwave-enhanced Oxidation-Photocatalysis(MOP) process,were studied.Through those experiments,effect was verified and characteristic was known,the foundation was laid for the follow-up demonstration project application.It was shown that,comparing with conventional method,IEF process promoted removal rate of pollutants and saved dosage of chemical agent as H2O2 was added,its biotoxicity removal was 80%.IEC process has good removal to biotoxicity of pharmaceutical wastewater,although all B/C were improved,the result without PAM or Ca(OH)2 was best.IEU process has 92% removal rate to biotoxicity of pharmaceutical wastewater,and its biodegradability was increased 45%.MOP process was effective Abstract:Chemical industry is an important pillar industry in Tianjin Binhai New Area,wastewater from that industry is main threat to pollution control in that area,as it has non-biodegradable and other characteristics.To solve the problem in single conventional method,actual wastewater from a chemical industry park in Binhai New Area was selected,4 coupling pretreatment processes for detoxication,namely Internal Electrolysis-Fenton(IEF),Internal Electrolysis-Coagulation(IEC),Internal Electrolysis-Ultrasonic(IEU) and Microwave-enhanced Oxidation-Photocatalysis(MOP) process,were studied.Through those experiments,effect was verified and characteristic was known,the foundation was laid for the follow-up demonstration project application

  14. Chemical computing with reaction-diffusion processes.

    Science.gov (United States)

    Gorecki, J; Gizynski, K; Guzowski, J; Gorecka, J N; Garstecki, P; Gruenert, G; Dittrich, P

    2015-07-28

    Chemical reactions are responsible for information processing in living organisms. It is believed that the basic features of biological computing activity are reflected by a reaction-diffusion medium. We illustrate the ideas of chemical information processing considering the Belousov-Zhabotinsky (BZ) reaction and its photosensitive variant. The computational universality of information processing is demonstrated. For different methods of information coding constructions of the simplest signal processing devices are described. The function performed by a particular device is determined by the geometrical structure of oscillatory (or of excitable) and non-excitable regions of the medium. In a living organism, the brain is created as a self-grown structure of interacting nonlinear elements and reaches its functionality as the result of learning. We discuss whether such a strategy can be adopted for generation of chemical information processing devices. Recent studies have shown that lipid-covered droplets containing solution of reagents of BZ reaction can be transported by a flowing oil. Therefore, structures of droplets can be spontaneously formed at specific non-equilibrium conditions, for example forced by flows in a microfluidic reactor. We describe how to introduce information to a droplet structure, track the information flow inside it and optimize medium evolution to achieve the maximum reliability. Applications of droplet structures for classification tasks are discussed. PMID:26078345

  15. Study on microwave assisted process in chemical extraction

    International Nuclear Information System (INIS)

    The microwave assisted process is a revolutionary method of extraction that reduces the extraction time to as little as a few seconds, with up to a ten-fold decrease in the use of solvents. The target material is immersed in solvent that is transparent to microwaves, so only the target material is heated, and because of the microwaves tend to heat the inside of the material quickly, the target chemical are expelled in a few seconds. benefits from this process include significant reductions in the amount of energy required and substantial reductions in the cost and dispose of hazardous solvents. A thorough review has been displayed on: using the microwave in extraction, applications of microwave in industry, process flow diagram, mechanism of the process and comparison between microwave process and other extraction techniques (soxhlet, steam distillation and supercritical fluid). This review attempts to summarize the studies about microwave assisted process as a very promising technique. (Author)

  16. Rock fracture processes in chemically reactive environments

    Science.gov (United States)

    Eichhubl, P.

    2015-12-01

    Rock fracture is traditionally viewed as a brittle process involving damage nucleation and growth in a zone ahead of a larger fracture, resulting in fracture propagation once a threshold loading stress is exceeded. It is now increasingly recognized that coupled chemical-mechanical processes influence fracture growth in wide range of subsurface conditions that include igneous, metamorphic, and geothermal systems, and diagenetically reactive sedimentary systems with possible applications to hydrocarbon extraction and CO2 sequestration. Fracture processes aided or driven by chemical change can affect the onset of fracture, fracture shape and branching characteristics, and fracture network geometry, thus influencing mechanical strength and flow properties of rock systems. We are investigating two fundamental modes of chemical-mechanical interactions associated with fracture growth: 1. Fracture propagation may be aided by chemical dissolution or hydration reactions at the fracture tip allowing fracture propagation under subcritical stress loading conditions. We are evaluating effects of environmental conditions on critical (fracture toughness KIc) and subcritical (subcritical index) fracture properties using double torsion fracture mechanics tests on shale and sandstone. Depending on rock composition, the presence of reactive aqueous fluids can increase or decrease KIc and/or subcritical index. 2. Fracture may be concurrent with distributed dissolution-precipitation reactions in the hostrock beyond the immediate vicinity of the fracture tip. Reconstructing the fracture opening history recorded in crack-seal fracture cement of deeply buried sandstone we find that fracture length growth and fracture opening can be decoupled, with a phase of initial length growth followed by a phase of dominant fracture opening. This suggests that mechanical crack-tip failure processes, possibly aided by chemical crack-tip weakening, and distributed solution-precipitation creep in the

  17. Supporting chemical process design under uncertainty

    Directory of Open Access Journals (Sweden)

    A. Wechsung

    2010-09-01

    Full Text Available A major challenge in chemical process design is to make design decisions based on partly incomplete or imperfect design input data. Still, process engineers are expected to design safe, dependable and cost-efficient processes under these conditions. The complexity of typical process models limits intuitive engineering estimates to judge the impact of uncertain parameters on the proposed design. In this work, an approach to quantify the effect of uncertainty on a process design in order to enhance comparisons among different designs is presented. To facilitate automation, a novel relaxation-based heuristic to differentiate between numerical and physical infeasibility when simulations do not converge is introduced. It is shown how this methodology yields more details about limitations of a studied process design.

  18. The pharmaceutical industry in the industrial chemical group: The National Union of Chemical-Pharmaceutical Laboratories (1919-1936

    Directory of Open Access Journals (Sweden)

    Rodríguez Nozal, Raúl

    2011-12-01

    Full Text Available The pharmaceutical industry associations, as it happened with other businesses, had a significant rise during the dictatorship of Primo de Rivera and II Republic. The Cámara Nacional de Industrias Químicas, in Barcelona, represented the national chemical industry to its ultimate assimilation by the Organización Sindical in 1939. In this association, matters relating to pharmaceutical products —which we will specially deal with in this work— were managed by the Unión Nacional de Laboratorios Químico-Farmacéuticos, which defended the interests of pharmaceutical companies in the presence of government authorities, using the resources and mechanisms also managed by business pressure groups. The inclusion of industrial pharmacy in the Chemical lobby separated the pharmaceutical industry from traditional exercise and its corporate environment. This created ups and downs, conflicts of interests and finally, love and hate relationships with their colleagues of the pharmacy work placement and, of course, with the association that represented them: the Unión Farmacéutica Nacional.

    El asociacionismo farmacéutico industrial, al igual que ocurriera con otras actividades empresariales, experimentó un notable auge durante la Dictadura de Primo de Rivera y la II República. La Cámara Nacional de Industrias Químicas, desde Barcelona, representó a la industria química nacional hasta su asimilación definitiva por la Organización Sindical franquista, en 1939. Dentro de esta asociación, los asuntos relacionados con los productos farmacéuticos, a los que prestaremos especial atención en este trabajo, fueron gestionados por la Unión Nacional de Laboratorios Químico- Farmacéuticos, que defendió los intereses de los productores de medicamentos industriales ante las autoridades gubernamentales, utilizando para ello recursos y mecanismos también manejados por otros grupos empresariales de presión. La inclusión de la farmacia industrial

  19. Comparison of acute toxicity of process chemicals used in the oil refinery industry, tested with the diatom Chaetoceros gracilis, the flagellate Isochrysis galbana, and the zebra fish, Brachydanio rerio

    Energy Technology Data Exchange (ETDEWEB)

    Roseth, S.; Edvardsson, T.; Botten, T.M.; Fuglestad, J.; Fonnum, F.; Stenersen, J. [Univ. of Oslo (Norway)

    1996-07-01

    Chemicals under the trade names Nalco 537-DA, Nalco 625, Nalco 7607, Nalco 5165, Ivamin, and technical monoethanolamine are used extensively in the oil refinery industry. Aquatic toxicity tests were conducted using zebra fish fry (Brachydanio rerio) and the unicellular algae Isochrysis galbana (a flagellate) and Chaetoceros gracilis (a diatom). Inhibition of cell division, chlorophyll content, and {sup 14}CO{sub 2} uptake in the algae were sensitive end points. The effective concentrations (EC50s) of growth inhibition were 0.1 mg/L (Ivamin; I. galbana), 0.8 mg/L (Nalco 7607; I. galbana), 6 mg/L (Nalco 625; I. galbana), 10 mg/L (Nalco 5165; C. gracilis), and 15 mg/L (Nalco 537-DA; C. gracilis). The lethal concentrations (LC50s) (96 h) toward zebra fish fry was 1 mg/L for Nalco 7607, 6.5 mg/L for Nalco 537-DA, 7.1 mg/L for Nalco 625, and 20 mg/L for Ivamin 803. Monoethanolamine had an LC50 higher than 5,000 mg/L. Nalco 5165 was not tested on fish fry. The heartbeat frequency of fish embryos was reduced by 2.5 mg/L Nalco 537-DA, but this was an insensitive end point for the other chemicals.

  20. Comparison of acute toxicity of process chemicals used in the oil refinery industry, tested with the diatom Chaetoceros gracilis, the flagellate Isochrysis galbana, and the zebra fish, Brachydanio rerio

    International Nuclear Information System (INIS)

    Chemicals under the trade names Nalco 537-DA, Nalco 625, Nalco 7607, Nalco 5165, Ivamin, and technical monoethanolamine are used extensively in the oil refinery industry. Aquatic toxicity tests were conducted using zebra fish fry (Brachydanio rerio) and the unicellular algae Isochrysis galbana (a flagellate) and Chaetoceros gracilis (a diatom). Inhibition of cell division, chlorophyll content, and 14CO2 uptake in the algae were sensitive end points. The effective concentrations (EC50s) of growth inhibition were 0.1 mg/L (Ivamin; I. galbana), 0.8 mg/L (Nalco 7607; I. galbana), 6 mg/L (Nalco 625; I. galbana), 10 mg/L (Nalco 5165; C. gracilis), and 15 mg/L (Nalco 537-DA; C. gracilis). The lethal concentrations (LC50s) (96 h) toward zebra fish fry was 1 mg/L for Nalco 7607, 6.5 mg/L for Nalco 537-DA, 7.1 mg/L for Nalco 625, and 20 mg/L for Ivamin 803. Monoethanolamine had an LC50 higher than 5,000 mg/L. Nalco 5165 was not tested on fish fry. The heartbeat frequency of fish embryos was reduced by 2.5 mg/L Nalco 537-DA, but this was an insensitive end point for the other chemicals

  1. A Survey of Industrial Organic Chemists: Understanding the Chemical Industry's Needs of Current Bachelor-Level Graduates

    Science.gov (United States)

    Fair, Justin D.; Kleist, Elyse M.; Stoy, Dylan M.

    2014-01-01

    A survey was conducted of companies from the chemical industry with an emphasis on the organic division. The data include results from 377 respondents from more than 100 different companies. More than half of all undergraduates gain fulltime work in the chemical industry or government after graduating with a bachelor's degree in chemistry.…

  2. European Union-Emission Trading Scheme: outlook for the chemical industry

    International Nuclear Information System (INIS)

    From 2013, under the European Union Emissions Trading Scheme (EU-ETS), Europe will cap its emissions of nitrous oxide (N2O) and per-fluorocarbons (PFC) from the chemical industry. Besides, 336 chemical industry facilities will be forced to limit their emissions at 45.8 million tons of CO2 per year from 2013 to 2020. At date August 1, 2012, almost 70% of the carbon credits issued by the clean development mechanism (CDM) were carried out mainly through the destruction of hydro-fluorocarbons (HFC-23) (42%) and N2O (22%). The contribution of emission reductions through chemical processes in the Joint Implementation (JI) projects is smaller but still amounted to 32% of all projects. From 1 May 2013 the European Union will refuse CDM and JI credits from emission reductions of HFC-23 and N2O. The issues of the introduction of the chemical industry in the EU-ETS in the context of low CO2 prices and limited validity of CDM and JI chemical projects are high. Therefore, domestic CO2 emissions reductions from energy consumption of the chemistry sector will take a larger share. (authors)

  3. Differences in morphological properties between the olivine group minerals formed in natural and industrial processes

    OpenAIRE

    Dević S.; Marčeta L.

    2007-01-01

    Olivines are a large isomorphic series of minerals, belonging to silicates group. Regardless of their chemical composition, any of these minerals can be formed both in natural and industrial processes. The aim of this work is to describe these minerals and differences of morphological properties between the olivines formed in nature, and those formed as byproducts of some industrial processes , as Process Metalurgy-Ironmaking. The olivines whose formation is tied to rock masses (natural proce...

  4. Smelting-reduction export gas as syngas in the chemical industry

    Energy Technology Data Exchange (ETDEWEB)

    Wall, Doris; Kepplinger, Werner [Institute of Process Technology, Montanuniversitaet Leoben (Austria); Millner, Robert [Siemens VAI, Linz (Austria)

    2011-08-15

    Export gases from iron-making processes are typically used as an energy source for heat and power generation within the iron and steel industry, although their calorific value is comparatively low. The fact that COREX {sup registered} and FINEX {sup registered} smelting-reduction export gases typically consist of the major syngas-components CO and H{sub 2} (approx. 50% of gas composition), makes them attractive for utilization in the direct reduction of iron ores and in the chemical synthesis industry. This paper will discuss the required process steps for converting smelting-reduction export gases into synthesis gas (syngas) using the example of methanol production. The calculated CO{sub 2}-balance shows promising results for chemical utilization of COREX {sup registered} export gas compared to energy utilization in conventional or combined power plants. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  5. 主要煤化工行业原料煤利用 NOx 产排污系数研究%Coefficient research of NOx generation and discharge in Raw material coal utilization process of main coal chemical industry

    Institute of Scientific and Technical Information of China (English)

    卢立栋; 李媛媛; 梁俊宁; 栁玲; 宋丽娜

    2013-01-01

    For the five coal industries: synthesis ammonia , methanol , dimethyle ether , urea and semi coke , the handbook , named“《The First National Census of Industrial Pollution Sources Producing Sewage Coefficient Handbook 》”, is not clearly mentioned the coeffi-cient of sewage for Nitrogen Oxide (NOx) generated by the process of feed coal.In this paper, Emission coefficient of NOx has been calcu-lated and kept statistic through field monitoring and laboratory simulating studies , which can calculate accurately the coefficient in above five coal industries .This study has provided necessary ideas and methods for consummating the emission coefficient .%针对《第一次全国污染源普查工业源产排污系数手册》中尚未确定合成氨、甲醇、二甲醚、尿素以及兰炭行业原料煤利用过程中氮氧化物产排污系数的现状,课题通过现场监测与实验模拟法对其进行测算与统计,较为准确的测算出以上行业原料煤利用过程中氮氧化物的产排污系数,为完善我国产排污系数提供了必要的思路与方法。

  6. Cogeneration Technology Alternatives Study (CTAS). Volume 3: Industrial processes

    Science.gov (United States)

    Palmer, W. B.; Gerlaugh, H. E.; Priestley, R. R.

    1980-01-01

    Cogenerating electric power and process heat in single energy conversion systems rather than separately in utility plants and in process boilers is examined in terms of cost savings. The use of various advanced energy conversion systems are examined and compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the target energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules specified by NASA for determining performance and cost. Data and narrative descriptions of the industrial processes are given.

  7. Utilization of chemical looping strategy in coal gasification processes

    Institute of Scientific and Technical Information of China (English)

    Liangshih Fan; Fanxing Li; Shwetha Ramkumar

    2008-01-01

    Three chemical looping gasification processes, i. e. Syngas Chemical Looping (SCL) process, Coal Direct Chemical Looping (CDCL) process, and Calcium Looping process (CLP), are being developed at the Ohio State University (OSU). These processes utilize simple reaction schemes to convert carbonaceous fuels into products such as hydrogen, electricity, and synthetic fuels through the transformation of a highly reactive, highly recyclable chemical intermediate. In this paper, these novel chemical looping gasification processes are described and their advantages and potential challenges for commercialization are discussed.

  8. The Managerial Process in the Media Industry

    Directory of Open Access Journals (Sweden)

    Andrei NICULESCU

    2011-06-01

    Full Text Available Managing an organisation from the media industry has a series of particularities that are the object of this analysis. The main functions of management are studied with the help of relevant examples and case studies taken from the specialized literature. For such a complex, dynamic and versatile industry such as media, with the electronic sector evolving perhaps more rapidly than in any other industry, the challenges facing managers are multiple.

  9. Fundamentals of cleaner technology in the chemicals industry.

    Science.gov (United States)

    Simmler, W

    1982-10-01

    Basic synthetic processes start with more or less inert material of natural origin, both inorganic and organic matter. Process energy is the agent for converting starting material of low reactivity into highly reactive derivatives or elements. The principles of chemical reactions as first steps of synthesis are explained along with the formation of by-products. The second steps of applying separation techniques for purposes of concentration and purification of products desired and of extracting unwanted and harmful products to be reused or eliminated are presented as critical examples. Reuse of by-products within the limits of chemical recycling, as well as degradation or final waste disposal, are shown as third steps. A concept of cleaner technology is outlined as an unachievable aim due to natural limitations of both entropy and energy. PMID:7169033

  10. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  11. A Framework to Design and Optimize Chemical Flooding Processes

    Energy Technology Data Exchange (ETDEWEB)

    Mojdeh Delshad; Gary A. Pope Kamy Sepehrnoori

    2006-08-31

    The goal of this proposed research is to provide an efficient and user friendly simulation framework for screening and optimizing chemical/microbial enhanced oil recovery processes. The framework will include (1) a user friendly interface to identify the variables that have the most impact on oil recovery using the concept of experimental design and response surface maps, (2) UTCHEM reservoir simulator to perform the numerical simulations, and (3) an economic model that automatically imports the simulation production data to evaluate the profitability of a particular design. Such a reservoir simulation framework is not currently available to the oil industry. The objectives of Task 1 are to develop three primary modules representing reservoir, chemical, and well data. The modules will be interfaced with an already available experimental design model. The objective of the Task 2 is to incorporate UTCHEM reservoir simulator and the modules with the strategic variables and developing the response surface maps to identify the significant variables from each module. The objective of the Task 3 is to develop the economic model designed specifically for the chemical processes targeted in this proposal and interface the economic model with UTCHEM production output. Task 4 is on the validation of the framework and performing simulations of oil reservoirs to screen, design and optimize the chemical processes.

  12. A FRAMEWORK TO DESIGN AND OPTIMIZE CHEMICAL FLOODING PROCESSES

    Energy Technology Data Exchange (ETDEWEB)

    Mojdeh Delshad; Gary A. Pope; Kamy Sepehrnoori

    2005-07-01

    The goal of this proposed research is to provide an efficient and user friendly simulation framework for screening and optimizing chemical/microbial enhanced oil recovery processes. The framework will include (1) a user friendly interface to identify the variables that have the most impact on oil recovery using the concept of experimental design and response surface maps, (2) UTCHEM reservoir simulator to perform the numerical simulations, and (3) an economic model that automatically imports the simulation production data to evaluate the profitability of a particular design. Such a reservoir simulation framework is not currently available to the oil industry. The objectives of Task 1 are to develop three primary modules representing reservoir, chemical, and well data. The modules will be interfaced with an already available experimental design model. The objective of the Task 2 is to incorporate UTCHEM reservoir simulator and the modules with the strategic variables and developing the response surface maps to identify the significant variables from each module. The objective of the Task 3 is to develop the economic model designed specifically for the chemical processes targeted in this proposal and interface the economic model with UTCHEM production output. Task 4 is on the validation of the framework and performing simulations of oil reservoirs to screen, design and optimize the chemical processes.

  13. THE INTEGRATED PROCESS OF QUALITY MANAGEMENT FOR INDUSTRIAL PRODUCTS

    OpenAIRE

    Chala, O.

    2010-01-01

    In the article the problem of quality management of products is examined on an industrial enterprise. The integrated process of quality management of products is offered. Generalized and complemented list of factors which influence on quality of industrial products.

  14. CO{sub 2} emissions and reduction potential in China's chemical industry

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Bing [Department of Chemical Engineering, Tsinghua University, Beijing 100084 (China); International Institute for Applied Systems Analysis, Schlossplatz 1, A-2361 Laxenburg (Austria); Zhou, Wenji; Hu, Shanying; Li, Qiang; Jin, Yong [Department of Chemical Engineering, Tsinghua University, Beijing 100084 (China); Griffy-Brown, Charla [Graziadio School of Business, Pepperdine University, Los Angeles, CA 90045 (United States)

    2010-12-15

    GHG (Increasing greenhouse gas) emissions in China imposes enormous pressure on China's government and society. The increasing GHG trend is primarily driven by the fast expansion of high energy-intensive sectors including the chemical industry. This study investigates energy consumption and CO{sub 2} emissions in the processes of chemical production in China through calculating the amounts of CO{sub 2} emissions and estimating the reduction potential in the near future. The research is based on a two-level perspective which treats the entire industry as Level one and six key sub-sectors as Level two, including coal-based ammonia, calcium carbide, caustic soda, coal-based methanol, sodium carbonate, and yellow phosphorus. These two levels are used in order to address the complexity caused by the fact that there are more than 40 thousand chemical products in this industry and the performance levels of the technologies employed are extremely uneven. Three scenarios with different technological improvements are defined to estimate the emissions of the six sub-sectors and analyze the implied reduction potential in the near future. The results highlight the pivotal role that regulation and policy administration could play in controlling the CO{sub 2} emissions by promoting average technology performances in this industry. (author)

  15. Electronic dissipation processes during chemical reactions on surfaces

    CERN Document Server

    Stella, Kevin

    2012-01-01

    Hauptbeschreibung Every day in our life is larded with a huge number of chemical reactions on surfaces. Some reactions occur immediately, for others an activation energy has to be supplied. Thus it happens that though a reaction should thermodynamically run off, it is kinetically hindered. Meaning the partners react only to the thermodynamically more stable product state within a mentionable time if the activation energy of the reaction is supplied. With the help of catalysts the activation energy of a reaction can be lowered. Such catalytic processes on surfaces are widely used in industry. A

  16. Materials of 44. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    Scientific assemblies of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry are the most important chemical meeting organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects was proposed as scientific sessions and symposia topics: solid state chemistry; didactics of chemistry; electrochemistry; biologically active compounds; geochemistry; organic chemistry; physical chemistry; environment quality and protection; coordination chemistry; chemical technology; polymers; explosive materials; analytical chemistry; theoretical chemistry

  17. Energy use and energy intensity of the U.S. chemical industry

    Energy Technology Data Exchange (ETDEWEB)

    Worrell, E.; Phylipsen, D.; Einstein, D.; Martin, N.

    2000-04-01

    the main electricity consuming process in the chemical industry, next to oxygen and nitrogen production. We estimate final electricity use at 173 PJ (48 TWh) and fuel use of 38 PJ. Total primary energy consumption is estimated at 526 PJ (including credits for hydrogen export). The energy intensity is estimated at an electricity consumption of 4380 kWh/tonne chlorine and fuel consumption of 3.45 GJ/tonne chlorine, where all energy use is allocated to chlorine production. Assuming an average power generation efficiency of 33% the primary energy consumption is estimated at 47.8 GJ/tonne chlorine (allocating all energy use to chlorine).

  18. Chemical and Microbiological Analysis of Certain Water Sources and Industrial Wastewater Samples in Dakahlia Governorate

    International Nuclear Information System (INIS)

    The chemical analysis included quantitative measurement of electrical conductivity, alkalinity , hardness sulphate, ph, total dissolved solids, chloride, as well as dissolved oxygen was carried out. The microbiological examination for different water sources and industrial wastewater samples was also conducted. some of heavy metals, Co2+ Cu2+ Fe3+ and Mn2+ were determined in fresh water, while other metals, such as Cr6+ , Co2+ , Zn2+ and Ni2+ were measured in industrial wastewater. Results of the chemical analysis showed that all measured parameters were found within the limitation either national or international law, except some samples which showed higher values than the permissible limits for some measured parameters. The microbiological analysis exhibited presence of yeasts, fungi and bacteria. Most bacterial isolates were short rod, spore formers as well as coccoid shaped bacteria. The efficiency of water treatment process on the reduction of microbial load was also calculated. Regarding the pathogenic bacteria, data showed that neither water samples nor industrial wastewater contain pathogens when using specific cultivation media for the examination. Furthermore, data proved the possibility of recycling of the tested industrial wastewater on which some microorganisms can grow. Data showed that the percent of heavy metals removal can reach to more than 70% in some cases as a result to bacterial treatment of industrial wastewater

  19. Valorization of rendering industry wastes and co-products for industrial chemicals, materials and energy: review.

    Science.gov (United States)

    Mekonnen, Tizazu; Mussone, Paolo; Bressler, David

    2016-01-01

    Over the past decades, strong global demand for industrial chemicals, raw materials and energy has been driven by rapid industrialization and population growth across the world. In this context, long-term environmental sustainability demands the development of sustainable strategies of resource utilization. The agricultural sector is a major source of underutilized or low-value streams that accompany the production of food and other biomass commodities. Animal agriculture in particular constitutes a substantial portion of the overall agricultural sector, with wastes being generated along the supply chain of slaughtering, handling, catering and rendering. The recent emergence of bovine spongiform encephalopathy (BSE) resulted in the elimination of most of the traditional uses of rendered animal meals such as blood meal, meat and bone meal (MBM) as animal feed with significant economic losses for the entire sector. The focus of this review is on the valorization progress achieved on converting protein feedstock into bio-based plastics, flocculants, surfactants and adhesives. The utilization of other rendering streams such as fat and ash rich biomass for the production of renewable fuels, solvents, drop-in chemicals, minerals and fertilizers is also critically reviewed. PMID:25163531

  20. Predictive maintenance of critical equipment in industrial processes

    Science.gov (United States)

    Hashemian, Hashem M.

    This dissertation is an account of present and past research and development (R&D) efforts conducted by the author to develop and implement new technology for predictive maintenance and equipment condition monitoring in industrial processes. In particular, this dissertation presents the design of an integrated condition-monitoring system that incorporates the results of three current R&D projects with a combined funding of $2.8 million awarded to the author by the U.S. Department of Energy (DOE). This system will improve the state of the art in equipment condition monitoring and has applications in numerous industries including chemical and petrochemical plants, aviation and aerospace, electric power production and distribution, and a variety of manufacturing processes. The work that is presented in this dissertation is unique in that it introduces a new class of condition-monitoring methods that depend predominantly on the normal output of existing process sensors. It also describes current R&D efforts to develop data acquisition systems and data analysis algorithms and software packages that use the output of these sensors to determine the condition and health of industrial processes and their equipment. For example, the output of a pressure sensor in an operating plant can be used not only to indicate the pressure, but also to verify the calibration and response time of the sensor itself and identify anomalies in the process such as blockages, voids, and leaks that can interfere with accurate measurement of process parameters or disturb the plant's operation, safety, or reliability. Today, process data are typically collected at a rate of one sample per second (1 Hz) or slower. If this sampling rate is increased to 100 samples per second or higher, much more information can be extracted from the normal output of a process sensor and then used for condition monitoring, equipment performance measurements, and predictive maintenance. A fast analog-to-digital (A

  1. Refractories for Industrial Processing. Opportunities for Improved Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Hemrick, James G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hayden, H. Wayne [Metals Manufacture Process and Controls Technology, Inc., Oak Ridge, TN (United States); Angelini, Peter [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Moore, Robert E. [R.E. Moore Associates, Maricopa, AZ (United States); Headrick, William L. [R.E. Moore Associates, Maricopa, AZ (United States)

    2005-01-01

    Refractories are a class of materials of critical importance to manufacturing industries with high-temperature unit processes. This study describes industrial refractory applications and identifies refractory performance barriers to energy efficiency for processing. The report provides recommendations for R&D pathways leading to improved refractories for energy-efficient manufacturing and processing.

  2. Intelligent Controller Design for a Chemical Process

    Directory of Open Access Journals (Sweden)

    Mr. Glan Devadhas G

    2010-12-01

    Full Text Available Chemical process control is a challenging problem due to the strong on*line non*linearity and extreme sensitivity to disturbances of the process. Ziegler – Nichols tuned PI and PID controllers are found to provide poor performances for higher*order and non–linear systems. This paper presents an application of one*step*ahead fuzzy as well as ANFIS (adaptive*network*based fuzzy inference system tuning scheme for an Continuous Stirred Tank Reactor CSTR process. The controller is designed based on a Mamdani type and Sugeno type fuzzy system constructed to model the dynamics of the process. The fuzzy system model can take advantage of both a priori linguistic human knowledge through parameter initialization, and process measurements through on* line parameter adjustment. The ANFIS, which is a fuzzy inference system, is implemented in the framework of adaptive networks. The proposed ANFIS can construct an input*output mapping based on both human knowledge (in the form of fuzzy if*then rules and stipulated input*output data pairs. In this method, a novel approach based on tuning of fuzzy logic control as well as ANFIS for a CSTR process, capable of providing an optimal performance over the entire operating range of process are given. Here Fuzzy logic control as well as ANFIS for obtaining the optimal design of the CSTR process is explained. In this approach, the development of rule based and the formation of the membership function are evolved simultaneously. The performance of the algorithm in obtaining the optimal tuning values has been analyzed in CSTR process through computer simulation.

  3. Polychlorinated Biphenyls in the Centralized Wastewater Treatment Plant in a Chemical Industry Zone: Source, Distribution, and Removal

    OpenAIRE

    Min Yao; Zhongjian Li; Xingwang Zhang; Lecheng Lei

    2014-01-01

    Polychlorinated biphenyls (PCBs) could be dissolved in wastewater or adsorbed on particulate. The fate of PCBs in wastewater is essential to evaluate the feasibility of wastewater treatment processes and the environmental risk. Here dissolved and adsorbed concentrations of twenty concerned PCB congeners and total PCBs have been measured in the centralized wastewater treatment plant of a chemical industry zone in Zhejiang, China. It was found that the dyeing chemical processes were the main so...

  4. The strategic value of industrial radiation manufacturing and processing technologies

    International Nuclear Information System (INIS)

    Planned and projected budget cuts over the next many years will reduce the number of Department of Defense (DoD) personnel and the diversity and quantity of their armaments and systems. Consequently, there is a requirement for the deployment of more effective defense equipment and their more efficient operation. Concomitant with this challenge is an opportunity for innovative technologies that can, at a lower cost, produce new, stronger, more durable materials-and do so with less environmental impact. Radiation processing offers this potential for (a) creating significant cost savings and performance advantages in a broad range of defense materials; (b) destroying and detoxifying dangerous chemicals, ordnance, and rocket propellants; (c) cleaning noxious gaseous effluents; and (d) purifying contaminated water. Radiation technology has the potential to immediately affect defense materials and, in the short and long terms, US industrial international competitiveness

  5. The Technology for Intensification of Chemical Reaction Process Envisaged in the "863" Plan

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ It is learned from the Ministry of Science and Technology that in order to promote the shift of China's chemical industry toward an energy efficient and environmentally friendly product mode, the technology for intensification of chemical reaction processes has been included in the National "863" Project of the "Eleventh Five-Year Plan", and the application for research project proposals is to be accepted.

  6. Idaho Chemical Processing Plant Site Development Plan

    International Nuclear Information System (INIS)

    The Idaho Chemical Processing Plant (ICPP) mission is to receive and store spent nuclear fuels and radioactive wastes for disposition for Department of Energy (DOE) in a cost-effective manner that protects the safety of Idaho National Engineering Laboratory (INEL) employees, the public, and the environment by: Developing advanced technologies to process spent nuclear fuel for permanent offsite disposition and to achieve waste minimization. Receiving and storing Navy and other DOE assigned spent nuclear fuels. Managing all wastes in compliance with applicable laws and regulations. Identifying and conducting site remediation consistent with facility transition activities. Seeking out and implementing private sector technology transfer and cooperative development agreements. Prior to April 1992, the ICPP mission included fuel reprocessing. With the recent phaseout of fuel reprocessing, some parts of the ICPP mission have changed. Others have remained the same or increased in scope

  7. Technology Development Road for Chemical Fiber Industry in Ghina [Part Two

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Ⅲ.Technology development direction for China's chemical fiber industry in the"11th Five-year Plan" period and the longer run Presently,China's chemical fiber industry is in a critical period for development,or important transition period.Fully implement and fulfill the "'scientific development concept"put forward by the nation,and take a sustainable development road.The growth model of chemical fiber industry must undergo fundamental transformation from "quantitative"development into "qualitative" development.

  8. Chemical Industry R&D Roadmap for Nanomaterials By Design. From Fundamentals to Function

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2003-12-01

    Vision2020 agreed to join NNI and the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (DOE/EERE) in sponsoring the "Nanomaterials and the Chemical Industry Roadmap Workshop" on September 30-October 2, 2002. This roadmap, Chemical Industry R&D Roadmap for Nanomaterials By Design: From Fundamentals to Function, is based on the scientific priorities expressed by workshop participants from the chemical industry, universities, and government laboratories.

  9. Energy use and energy intensity of the U.S. chemical industry

    OpenAIRE

    Worrell, Ernst; Phylipsen, Dian; Einstein, Dan; Martin, Nathan

    2000-01-01

    The U.S. chemical industry is the largest in the world, and responsible for about 11 percent of the U.S. industrial production measured as value added. It consumes approximately 20 percent of total industrial energy consumption in the U.S. (1994), and contributes in similar proportions to U.S. greenhouse gas emissions. Surprisingly, there is not much information on energy use and energy intensity in the chemical industry available in the public domain. This report provides detailed info...

  10. Industrial Technologies Program Research Plan for Energy-Intensive Process Industries

    Energy Technology Data Exchange (ETDEWEB)

    Chapas, Richard B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Colwell, Jeffery A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2007-10-01

    In this plan, the Industrial Technologies Program (ITP) identifies the objectives of its cross-cutting strategy for conducting research in collaboration with industry and U.S. Department of Energy national laboratories to develop technologies that improve the efficiencies of energy-intensive process industries.

  11. 21 CFR 170.19 - Pesticide chemicals in processed foods.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Pesticide chemicals in processed foods. 170.19... chemicals in processed foods. When pesticide chemical residues occur in processed foods due to the use of... exemption granted or a tolerance prescribed under section 408 of the Act, the processed food will not...

  12. 21 CFR 570.19 - Pesticide chemicals in processed foods.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Pesticide chemicals in processed foods. 570.19... chemicals in processed foods. When pesticide chemical residues occur in processed foods due to the use of... exemption granted or a tolerance prescribed under section 408 of the act, the processed food will not...

  13. DETERMINANTS OF AN EFFECTIVE PRODUCT DEVELOPMENT PROCESS: TOWARDS A CONCEPTUAL FRAMEWORK FOR PROCESS INDUSTRY

    OpenAIRE

    DIANA CHRONÉER; KRISTINA LAURELL-STENLUND

    2006-01-01

    Organisation and management of the product development process have been an issue in both academia and industry for over three decades. The literature on product development is growing, but Process Industry is often lacking in these discussions. Therefore, this paper focuses on linking the determinants of an effective product development process to Process Industry and the implication this may have on a traditionally very process-oriented industry by nature. Further, the paper organises the b...

  14. 76 FR 63304 - Guidance for Industry on Incorporation of Physical-Chemical Identifiers Into Solid Oral Dosage...

    Science.gov (United States)

    2011-10-12

    ... the availability of a guidance for industry entitled ``Incorporation of Physical-Chemical Identifiers... announcing the availability of a guidance for industry entitled ``Incorporation of Physical-Chemical... HUMAN SERVICES Food and Drug Administration Guidance for Industry on Incorporation of...

  15. The removal of dinitrochlorobenzene from industrial residuals by liquid-liquid extraction with chemical reaction

    Directory of Open Access Journals (Sweden)

    G. C. M. Ferreira

    2007-09-01

    Full Text Available Nitrochlorobenzenes (NCBs are very important in the chemical industry since they have been used as raw material for the manufacture of crop protection products, as active ingredients in the pharmaceutical industry, as pigments and as antioxidants as well as for other uses. In industrial processes, NCBs are produced by monochlorobenzene (MCB nitration reactions and one of the main residuals formed is dinitrochlorobenzene (DNCB, which is mainly composed of the isomer 2,4DNCB. This subproduct, although of commercial interest when in its pure state, is generally incinerated due to the high costs of recovery treatment and purification. The objective of this study is to present an alternative to the treatment of industrial residuals containing DNCB. The technique consists of converting DNCB into sodium dinitrophenolate, which is very soluble in water and is also easy to reuse. For this purpose, liquid-liquid extraction with chemical reaction (alkaline hydrolysis with a rotating disc contactor (RDC is used. Experimental data on MCB nitration reactions as well as alkaline hydrolysis using a rotating disc contactor are presented.

  16. Application of repetitive pulsed power technology to chemical processing

    International Nuclear Information System (INIS)

    The numerous sites of soil and water contaminated with organic chemicals present an urgent environmental concern that continues to grow. Electron and x-ray irradiation have been shown to be effective methods to destroy a wide spectrum of organic chemicals, nitrates, nitrites, and cyanide in water by breaking molecules to non-toxic products or entirely mineralizing the by-products to gas, water, and salts. Sandia National Laboratories is developing Repetitive High Energy Pulsed Power (RHEPP) technology capable of producing high average power, broad area electron or x-ray beams. The 300 kW RHEPP-II facility accelerates electrons to 2.5 MeV at 25 kA over 1,000 cm2 in 60 ns pulses at repetition rates of over 100 Hz. Linking this modular treatment capability with the rapid optical-sensing diagnostics and neutral network characterization software algorithms will provide a Smart Waste Treatment (SWaT) system. Such a system would also be applicable for chemical manufacture and processing of industrial waste for reuse or disposal. This talk describes both the HREPP treatment capability and sensing technologies. Measurements of the propagated RHEPP-II beam and dose profiles are presented. Sensors and rapid detection software are discussed with application toward chemical treatment

  17. Education in petrochemical industry as prevention from chemical terrorism

    International Nuclear Information System (INIS)

    Technical and technological accidents in petrochemical industry, with possible catastrophic consequences, caused by anthropogenic activity (technical or technological malfunction, terror, or war destruction ), usually accompanied by great human losses and material damage and high intensity of events in a relatively short period of time, which requires a quick action of emergency responders, process personnel and the high degree of self-organized endangered population for treatment in these kind of accidents. This implies a high qualification and skills for the treatment of accidents of all factors of rescue and protection such as: process personnel, emergency responders (fire-fighters, technical services), other workers as well as the endangered population. Managing the system of protection and rescue in communities with such risks requires maximum responsibility of local authorities and management of petrochemical plants. Petrokemija Kutina, with its many years of experience as a target for military and terrorist attacks, actively participated in the creation of laws and systems of protection and rescue in the Republic of Croatia, and also in creating standard operating procedures on local and regional level, and is also ready to share its own experiences with other similar factories using toxic substances in the production processes.(author)

  18. Science, technology, and the industrialization of laser-driven processes

    International Nuclear Information System (INIS)

    Members of the laser program at Lawrence Livermore National Laboratory (LLNL) reviewed potential applications of lasers in industry, some of which are: isotope separation; cleanup of radioactive waste; trace impurity removal; selective chemical reactions; photochemical activation or dissociation of gases; control of combustion particulates; crystal and powder chemistry; and laser induced biochemistry. Many of these areas are currently under active study in the community. The investigation at LLNL focused on laser isotope separation of atomic uranium because of the large demand (> 1000 tonnes/year) and high product enrichment price (> $600/kg of product) for material used as fuel in commercial light-water nuclear power reactors. They also believed that once the technology was fully developed and deployed, it could be applied directly to separating many elements economically on an industrial scale. The Atomic Vapor Laser Isotope Separation (AVLIS) program at LLNL has an extensive uranium and plutonium program of >$100 M in FY85 and a minor research program for other elements. This report describes the AVLIS program conducted covering the following topics; candidate elements; separative work units; spectroscopic selectivety; major systems; facilities; integrated process model;multivariable sensitivety studies; world market; and US enrichment enterprise. 23 figs. (AT)

  19. Summaries of the 40. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    Annual 40. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry has been held in Gdansk on 22-26 September 1997. The most valuable scientific results obtained in Polish Laboratories have been presented in 22 main sections and 7 symposia directed especially at following subjects: analytical chemistry, biochemistry, solid state chemistry and material science, physical chemistry, heteroorganic and coordination chemistry, medical and pharmaceutical chemistry, metalorganic chemistry, inorganic and organic chemistry, polymers chemistry, chemistry and environment protection, theoretical chemistry, chemical didactics, photochemistry, radiation chemistry and chemical kinetics, chemical engineering, catalysis, crystallochemistry, chemical technology, electrochemistry, and instrumental methods

  20. Institute of Plastics Processing and Application of Light Industry

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Institute of Plastics Processing and processing center sponsored by UNDP. University. Application of Light Industry was Since 1999, it has been attached set up in 1983, based on the plastics to Beijing Technology and Business

  1. Thermal storage technologies for solar industrial process heat applications

    Science.gov (United States)

    Gordon, L. H.

    1979-01-01

    The state-of-the-art of thermal storage subsystems for the intermediate and high temperature (100 C to 600 C) solar industrial process heat generation is presented. Primary emphasis is focused on buffering and diurnal storage as well as total energy transport. In addition, advanced thermal storage concepts which appear promising for future solar industrial process heat applications are discussed.

  2. Thermodynamics principles characterizing physical and chemical processes

    CERN Document Server

    Honig, Jurgen M

    1999-01-01

    This book provides a concise overview of thermodynamics, and is written in a manner which makes the difficult subject matter understandable. Thermodynamics is systematic in its presentation and covers many subjects that are generally not dealt with in competing books such as: Carathéodory''s approach to the Second Law, the general theory of phase transitions, the origin of phase diagrams, the treatment of matter subjected to a variety of external fields, and the subject of irreversible thermodynamics.The book provides a first-principles, postulational, self-contained description of physical and chemical processes. Designed both as a textbook and as a monograph, the book stresses the fundamental principles, the logical development of the subject matter, and the applications in a variety of disciplines. This revised edition is based on teaching experience in the classroom, and incorporates many exercises in varying degrees of sophistication. The stress laid on a didactic, logical presentation, and on the relat...

  3. Interfacing industrial process control systems to LEP/LHC

    International Nuclear Information System (INIS)

    Modern industrial process control systems have developed to meet the needs of industry to increase the production while decreasing the costs. Although particle accelerators designers have pioneered in control systems during the seventies, it has now become possible to them to profit of industrial solutions in substitution of, or in complement with the more traditional home made ones. Adapting and integrating such industrial systems to the accelerator control area will certainly benefit to the field in terms of finance, human resources and technical facilities offered off-the-shelf by the widely experienced industrial controls community; however this cannot be done without slightly affecting the overall accelerator control architecture. The paper briefly describes the industrial controls arena and takes example on an industrial process control system recently installed at CERN to discuss in detail the related choices and issues. (author)

  4. Greening Food Processing Industry in Vietnam: Putting Industrial Ecology to Work

    OpenAIRE

    Tran Thi My Dieu

    2003-01-01

    The significant contribution to Vietnam's gross domestic product over the years give evidence of the important role of food processing industry in the economic and industrial development of the country. This is even more relevant from now onwards, as it is Vietnam's development strategy to become one of the top agricultural countries in the world by the year 2010. However, it is not difficult to recognize that the rapid growth of food processing industry in Vietnam goes together with environm...

  5. Microbiological and Chemical Quality of Water in Food Industries with Low Content of Water at End Products

    Directory of Open Access Journals (Sweden)

    Sh Nazmara

    2009-03-01

    Full Text Available "n "nBackground and Objectives: In the production of some high-consumed food products like cake, biscuit, chocolate and spaghetti water is used in the preparing of primary material and in the kneading processes. At the present study microbiological and chemical quality of consumed water in food industries of East Azerbaijan Province were studied."nMaterials and Methods: Eleven factories with different products were selected. Water samples were collected and analyzed regarding the microbiological contamination and chemical parameters, and heavy metals. In addition, condition of water quality in selected industry was surveyed during the summer."nResults: According to the results, monitoring of water quality in the studied industries is not suitable. The chemical characteristics of consumed water in those industries had major differences. Ni, Cr, Zn, Fe and Mn were present in all analyzed water but in lower concentration than national Maximum Contaminant Level (MCL. Pb was measured in higher concentration than MCL in spaghetti factory no. 2 and close to MCL in wiener and frankfurter and sugar industries. Cd was close to MCL in spaghetti factory no. 2 and wiener and frankfurter industries."nConclusion: It was concluded that for the safety and health of food products the food industries should use the public water supply system as water source at least in food processing units or in the units of preparing of primary materials. Also for the preventing of chemical pollution of food products it is necessary, pay more attention to the subject of water quality control according to the special water standard of food industries, and using less volume of water in some food industry isn.t acceptable reason for neglecting of water quality monitoring and assessing. In addition it is required to analyze heavy metals in the final products of those industries.

  6. Study on Industrial Integration Development of the Energy Chemical Industry in Urumqi-Changji-Shihezi Urban Agglomeration, Xinjiang, NW China

    Directory of Open Access Journals (Sweden)

    Guiling Wang

    2016-07-01

    Full Text Available With industrial integration accelerating in domestic and foreign enterprise, industrial integration is becoming the only way for regional development to break through its bottleneck. Compared with advanced foreign enterprises, there exists a significant gap in regional industrial integration, especially in the urban agglomeration of the energy chemical industries of Urumqi-Changji-Shihezi in Xinjiang. Findings from field visits and quantitative analysis show that the energy chemical industry in urban agglomeration is in a state of dispersed distribution, serious convergence in industrial structure, low level of specialization, and weak collaborative relationships. These issues seriously hamper the sustainable development of urban agglomeration. Specific actions aimed at these problems and the development bottleneck mainly include the integration of industrial parks in the central city and integration orientation on the level of urban agglomeration. Only by speeding up the pace of industry integration can Urumqi-Changji-Shihezi’s urban agglomeration maintain and improve its market competitiveness. Accordingly, it can promote innovation and sustainability in the energy chemical industry and improve the overall level of development.

  7. Analysis of the comprehensibility of chemical hazard communication tools at the industrial workplace.

    Science.gov (United States)

    Ta, Goh Choo; Mokhtar, Mazlin Bin; Mohd Mokhtar, Hj Anuar Bin; Ismail, Azmir Bin; Abu Yazid, Mohd Fadhil Bin Hj

    2010-01-01

    Chemical classification and labelling systems may be roughly similar from one country to another but there are significant differences too. In order to harmonize various chemical classification systems and ultimately provide consistent chemical hazard communication tools worldwide, the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) was endorsed by the United Nations Economic and Social Council (ECOSOC). Several countries, including Japan, Taiwan, Korea and Malaysia, are now in the process of implementing GHS. It is essential to ascertain the comprehensibility of chemical hazard communication tools that are described in the GHS documents, namely the chemical labels and Safety Data Sheets (SDS). Comprehensibility Testing (CT) was carried out with a mixed group of industrial workers in Malaysia (n=150) and factors that influence the comprehensibility were analysed using one-way ANOVA. The ability of the respondents to retrieve information from the SDS was also tested in this study. The findings show that almost all the GHS pictograms meet the ISO comprehension criteria and it is concluded that the underlying core elements that enhance comprehension of GHS pictograms and which are also essential in developing competent persons in the use of SDS are training and education. PMID:20616463

  8. Anaerobic baffled reactor coupled with chemical precipitation for treatment and toxicity reduction of industrial wastewater.

    Science.gov (United States)

    Laohaprapanona, Sawanya; Marquesa, Marcia; Hogland, William

    2014-01-01

    This study describes the reduction of soluble chemical oxygen demand (CODs) and the removal of dissolved organic carbon (DOC), formaldehyde (FA) and nitrogen from highly polluted wastewater generated during cleaning procedures in wood floor manufacturing using a laboratory-scale biological anaerobic baffled reactor followed by chemical precipitation using MgCI2 .6H20 + Na2HPO4. By increasing the hydraulic retention time from 2.5 to 3.7 and 5 days, the reduction rates of FA, DOC and CODs of nearly 100%, 90% and 83%, respectively, were achieved. When the Mg:N:P molar ratio in the chemical treatment was changed from 1:1:1 to 1.3:1:1.3 at pH 8, the NH4+ removal rate increased from 80% to 98%. Biologically and chemically treated wastewater had no toxic effects on Vibrio fischeri and Artemia salina whereas chemically treated wastewater inhibited germination of Lactuca sativa owing to a high salt content. Regardless of the high conductivity of the treated wastewater, combined biological and chemical treatment was found to be effective for the removal of the organic load and nitrogen, and to be simple to operate and to maintain. A combined process such as that investigated could be useful for on-site treatment of low volumes of highly polluted wastewater generated by the wood floor and wood furniture industries, for which there is no suitable on-site treatment option available today.

  9. Long-term energy efficiency analysis requires solid energy statistics. The case of the German basic chemical industry

    Energy Technology Data Exchange (ETDEWEB)

    Saygin, D.; Worrell, E.; Weiss, M.; Patela, M.K. [Utrecht University, Copernicus Institute of Sustainable Development, Faculty of Geosciences, Heidelberglaan 2, 3584 CS Utrecht (Netherlands); Tam, C.; Trudeau, N. [International Energy Agency IEA, 9 rue de la Federation, 75739 Paris Cedex 15 (France); Gielen, D.J. [International Renewable Energy Agency IRENA, IITC, Robert-Schuman-Platz 3, 53175 Bonn (Germany)

    2012-08-15

    Analyzing the chemical industry's energy use is challenging because of the sector's complexity and the prevailing uncertainty in energy use and production data. We develop an advanced bottom-up model (PIE-Plus) which encompasses the energy use of the 139 most important chemical processes. We apply this model in a case study to analyze the German basic chemical industry's energy use and energy efficiency improvements in the period between 1995 and 2008. We compare our results with data from the German Energy Balances and with data published by the International Energy Agency (IEA). We find that our model covers 88% of the basic chemical industry's total final energy use (including non-energy use) as reported in the German Energy Balances. The observed energy efficiency improvements range between 2.2 and 3.5% per year, i.e., they are on the higher side of the values typically reported in literature. Our results point to uncertainties in the basic chemical industry's final energy use as reported in the energy statistics and the specific energy consumption values. More efforts are required to improve the quality of the national and international energy statistics to make them usable for reliable monitoring of energy efficiency improvements of the chemical industry.

  10. Offshoring trends in the manufacturing process within the automotive industry

    DEFF Research Database (Denmark)

    Simplay, S.; Hansen, Zaza Nadja Lee

    2014-01-01

    consisting of original equipment manufacturers and engineering service providers. The findings indicated some offshoring trends in the automotive industry. Offshoring in this industry is moving from a manufacturing focus to incorporate large parts of the process, including high-level product development......This paper investigates offshoring trends in the automotive industry. The research approach consisted of combining empirical findings from case companies with latest research from the field. Empirical data was collected through case studies from 15 automotive organisations based in Europe...... with a focus on offshoring in the automotive industry and provides practitioners with information on a cutting-edge trend to the industry...

  11. Utility Disturbance Management in the Process Industry

    OpenAIRE

    Lindholm, Anna

    2011-01-01

    Use of utilities, such as steam and cooling water, is very common at industrial sites. Utilities are often shared between several production areas, and a disturbance in the supply of a utility is therefore likely to affect a large part of the production site, and cause great loss of revenue. In order to minimize the loss of revenue due to disturbances in utilities, the optimal supply of utilities to different areas has to be determined. It is not evident how utility resources should be divide...

  12. Multivariate statistical analysis of a multi-step industrial processes

    DEFF Research Database (Denmark)

    Reinikainen, S.P.; Høskuldsson, Agnar

    2007-01-01

    Monitoring and quality control of industrial processes often produce information on how the data have been obtained. In batch processes, for instance, the process is carried out in stages; some process or control parameters are set at each stage. However, the obtained data might not be utilized e....... This approach will show how the process develops from a data point of view. The procedure is illustrated on a relatively simple industrial batch process, but it is also applicable in a general context, where knowledge about the variables is available.......Monitoring and quality control of industrial processes often produce information on how the data have been obtained. In batch processes, for instance, the process is carried out in stages; some process or control parameters are set at each stage. However, the obtained data might not be utilized...

  13. Emission inventory of primary air pollutants in 2010 from industrial processes in Turkey.

    Science.gov (United States)

    Alyuz, Ummugulsum; Alp, Kadir

    2014-08-01

    The broad objective of this study was to develop CO2, PM, SOx, CO, NOx, VOC, NH3 and N2O emission inventory of organic and inorganic chemicals, mineral products, metallurgical, petroleum refining, wood products, food industries of Turkey for 2010 for both co]ntrolled and uncontrolled conditions. In this study, industries were investigated in 7 main categories and 53 sub-sectors and a representative number of pollutants per sub-sector were considered. Each industry was evaluated in terms of emitted emissions only from industrial processes, and fuel combustion activities were excluded (except cement industry). The study employed an approach designed in four stages; identification of key categories; activity data & emission factor search; emission factor analyzing; calculation of emissions. Emission factor analyzing required aggregate and firm analysis of sectors and sub-sectors and deeper insights into underlying specific production methods used in the industry to decide on the most representative emission factor. Industry specific abatement technologies were considered by using open-source documents and industry specific reports. Regarding results of this study, mineral industry and iron & steel industry were determined as important contributors of industrial emissions in Turkey in 2010. Respectively, organic chemicals, petroleum refining, and pulp & paper industries had serious contributions to Turkey's air pollutant emission inventory from industrial processes. The results showed that calculated CO2 emissions for year 2010 was 55,124,263 t, also other emissions were 48,853 t PM, 24,533 t SOx, 79,943 t NOx, 31,908 t VOC, 454 t NH3 and 2264 t N2O under controlled conditions.

  14. Emission inventory of primary air pollutants in 2010 from industrial processes in Turkey.

    Science.gov (United States)

    Alyuz, Ummugulsum; Alp, Kadir

    2014-08-01

    The broad objective of this study was to develop CO2, PM, SOx, CO, NOx, VOC, NH3 and N2O emission inventory of organic and inorganic chemicals, mineral products, metallurgical, petroleum refining, wood products, food industries of Turkey for 2010 for both co]ntrolled and uncontrolled conditions. In this study, industries were investigated in 7 main categories and 53 sub-sectors and a representative number of pollutants per sub-sector were considered. Each industry was evaluated in terms of emitted emissions only from industrial processes, and fuel combustion activities were excluded (except cement industry). The study employed an approach designed in four stages; identification of key categories; activity data & emission factor search; emission factor analyzing; calculation of emissions. Emission factor analyzing required aggregate and firm analysis of sectors and sub-sectors and deeper insights into underlying specific production methods used in the industry to decide on the most representative emission factor. Industry specific abatement technologies were considered by using open-source documents and industry specific reports. Regarding results of this study, mineral industry and iron & steel industry were determined as important contributors of industrial emissions in Turkey in 2010. Respectively, organic chemicals, petroleum refining, and pulp & paper industries had serious contributions to Turkey's air pollutant emission inventory from industrial processes. The results showed that calculated CO2 emissions for year 2010 was 55,124,263 t, also other emissions were 48,853 t PM, 24,533 t SOx, 79,943 t NOx, 31,908 t VOC, 454 t NH3 and 2264 t N2O under controlled conditions. PMID:24576652

  15. Environmental profiles on chemicals (EPC): A substitution tool i.a. used in the textile industry

    DEFF Research Database (Denmark)

    Larsen, Henrik Fred; Hansen, John; Laursen, Søren E.;

    2002-01-01

    When dealing with cleaner technology and product development within industries using a lot of different chemicals, substitution is essential. In many cases substitution of hazardous chemicals with less hazardous ones will diminish the environmental impact from the industry in question. But among ...

  16. Regional differences and sources of organochlorine pesticides in soils surrounding chemical industrial parks

    OpenAIRE

    Wang, G; Lu, Y. L.; Li, J.; Wang, T. Y.; Han, Jingyi; Luo, W.; Shi, Y.J.; Jiao, W.T.

    2009-01-01

    Concentrations of organochlorine pesticides (OCPs; dichlorodiphenyltrichloroethanes (DDTs), hexachlorocyclohexanes (HCHs), hexachlorobenzene (HCB)) were investigated in 105 soil samples collected in vicinity of the chemical industrial parks in Tianjin, China. OCP concentrations significantly varied in the study area, high HCH and DDT levels were found close to the chemical industrial parks. The intensity of agricultural activity and distance from the potential OCP emitters have important infl...

  17. Chemical, procedural and economical evaluation of carbon dioxide as feedstock in the chemical industry; Chemische, verfahrenstechnische und oekonomische Bewertung von Kohlendioxid als Rohstoff in der chemischen Industrie

    Energy Technology Data Exchange (ETDEWEB)

    Otto, Alexander

    2015-07-01

    The utilisation of CO{sub 2} as feedstock in the chemical industry represents an alternative to the geological storage, which is legally limited and socially debated. Generally, scientific publications about the utilisation of CO{sub 2} in chemical reactions typically address the feasibility of the syntheses without paying attention to the CO{sub 2} reduction potential or the economy in contrast to the conventional process of production. The aim of this doctoral thesis is to identify chemical reactions with CO{sub 2} as feedstock, which have the potential to reduce CO{sub 2} emissions. These reactions are evaluated concerning the industrial realization, CO{sub 2} balance and economy compared to the conventional processes. To achieve this, 123 reactions from the literature were collected and evaluated with the help of selection criteria developed specifically for this application. The criteria consider both, the quantitative potential to reduce CO{sub 2} and possible economical interests in these reactions. Additional to the process of the evaluation of the reactions, a CO{sub 2} reduction potential of 1.33 % of the greenhouse gas emissions within the European Union could be calculated. For the chemicals formic acid, oxalic acid, formaldehyde, methanol, urea and dimethyl ether, which most fully satisfy the selection criteria, a direct comparison of the CO{sub 2} based process with the conventional process is performed. By literature data, process designs, and simulations, it has been shown that the highest reductions of CO{sub 2} emissions can be achieved for methanol with 1.43 kg{sub CO2}/kg{sub MeOH} and dimethyl ether with 2.17 kg{sub CO2}/kg{sub DME}, but only with the assumption that the necessary hydrogen for the CO{sub 2} based reaction is produced by electrolysis operated with renewable energy. Overall, the CO{sub 2} based production processes of methanol and dimethyl ether could reduce 0.059 % of the greenhouse gas emissions of the European Union (EU) if

  18. Asymmetric catalysis in Brazil: development and potential for advancement of Brazilian chemical industry

    International Nuclear Information System (INIS)

    The preparation of enantiomerically pure or enriched substances is of fundamental importance to pharmaceutical, food, agrochemical, and cosmetics industries and involves a growing market of hundreds of billions of dollars. However, most chemical processes used for their production are not environmentally friendly because in most cases, stoichiometric amounts of chiral inductors are used and substantial waste is produced. In this context, asymmetric catalysis has emerged as an efficient tool for the synthesis of enantiomerically enriched compounds using chiral catalysts. More specifically, considering the current scenario in the Brazilian chemical industry, especially that of pharmaceuticals, the immediate prospect for the use of synthetic routes developed in Brazil in an enantioselective fashion or even the discovery of new drugs is practically null. Currently, the industrial production of drugs in Brazil is primarily focused on the production of generic drugs and is basically supported by imports of intermediates from China and India. In order to change this panorama and move forward toward the gradual incorporation of genuinely Brazilian synthetic routes, strong incentive policies, especially those related to continuous funding, will be needed. These incentives could be a breakthrough once we establish several research groups working in the area of organic synthesis and on the development and application of chiral organocatalysts and ligands in asymmetric catalysis, thus contributing to boost the development of the Brazilian chemical industry. Considering these circumstances, Brazil can benefit from this opportunity because we have a wide biodiversity and a large pool of natural resources that can be used as starting materials for the production of new chiral catalysts and are creating competence in asymmetric catalysis and related areas. This may decisively contribute to the growth of chemistry in our country. (author)

  19. Towards an Innovative Service Development Process in the Electricity Industry

    OpenAIRE

    Domigall, Yannic; Albani, Antonia; Winter, Robert, ed.

    2013-01-01

    The electricity industry is currently confronted with regulatory and technological change that leads to fundamental transformation of the value propositions and innovation processes of enterprises. New services are one possibility to compete in the new market environment. This paper proposes a service development process for the electricity industry that builds up on existing approaches. The process model was developed by means of an embedded research framework that combines qualitative and q...

  20. Economic Crisis and Industrial Structure of the Chemical Sector in Italy

    OpenAIRE

    Vitali Giampaolo

    2010-01-01

    The paper aim is to highlight the transformation of the chemical industry in Italy, after the declining of the large companies (Montedison, Enimont, Snia, etc.) and the rising of many medium- sized firms that have a good international competitiveness. The paper explores the characteristics of the sector: large presence of foreign MNEs, strong links between chemical industry and industrial district productions, high company specialization. The focus is on the competitive advantage of the Itali...

  1. Studying chemical vapor deposition processes with theoretical chemistry

    OpenAIRE

    Pedersen, Henrik; Elliott, Simon D.

    2014-01-01

    In a chemical vapor deposition (CVD) process, a thin film of some material is deposited onto a surface via the chemical reactions of gaseous molecules that contain the atoms needed for the film material. These chemical reactions take place on the surface and in many cases also in the gas phase. To fully understand the chemistry in the process and thereby also have the best starting point for optimizing the process, theoretical chemical modeling is an invaluable tool for providing atomic-scale...

  2. Logistic paradigm for industrial solid waste treatment processes

    OpenAIRE

    Janusz Grabara; Ioan Constantin Dima

    2014-01-01

    Due to the fact that industrial waste are a growing problem, both economic and environmental as their number is increasing every year, it is important to take measures to correctly dealing wi th industrial waste. This article presents the descriptive model of logistics processes concerning the management of industrial waste. In this model the flow of waste begins in the place of production and ends at their disposal. The article presents the concept of logistics model in graphical form...

  3. Application showcases for a small scale membrane contactor for fine chemical processes

    NARCIS (Netherlands)

    Roelands, C.P.M.; Ngene, I.S.

    2011-01-01

    The transition from batch to continuous processing in fine-chemicals industries offers many advantages; among these are a high volumetric productivity, improved control over reaction conditions resulting in a higher yield and selectivity, a small footprint and a safer process due to a smaller reacti

  4. RESEARCH ON PROCESSING OPERATIONS PARTS INDUSTRY LEATHER

    OpenAIRE

    P. Cucu; M. Malcoci

    2012-01-01

    The leather manufacturing a product requires going through several stages in the manufacturing process by which materials are made. Stages of their characteristics involving any number of individual orassociated technological changes and differentiates depending on the particular model used equipment, raw material characteristics. Processing component parts of a leather product, includes any number of different technological transformations. Their purpose is to prepare parts for assembly, fin...

  5. Lasers in Industry: Metalworking Processes and Systems

    Science.gov (United States)

    Sona, Alberto

    1988-01-01

    After a brief review of the lasers available for metal-working processes an analysis of the interaction of laser radiation with matter is provided in the power density ranges of practical use namely: (a) High energy density processes (106-107 W/cm2) exploiting focused beams to induce solid to liquid or to vapour state changes to allow the material removal for cutting or the formation of molten an resolidified material channels for welding and joining. (b) Medium energy density processes (104-105 W/cm2) exploiting unfocused beams with a suitable spatial distribution to provide surface treatments without change of state or with surface melting for hardening and cladding. Class (a) processes require a more complex analysis taking into account both the direct energy transfer from the beam to the workpiece by direct absorption and the coupling of the energy via the plasma generated by the interaction. Class (b) processes can be treated with simpler models under the assumption of constant values for the absorption and for the thermal parameters of the target. Temperature dependent parameters can also be considered with added complexity. Finally a short outline will be provided of the systems which can implement in practice the laser metalworking process.

  6. Sustainable processes using heterogeneous acid catalysts. Some examples of industrial interest.

    OpenAIRE

    Gliozzi, Gherardo

    2014-01-01

    In recent years the need for the design of more sustainable processes and the development of alternative reaction routes to reduce the environmental impact of the chemical industry has gained vital importance. Main objectives especially regard the use of renewable raw materials, the exploitation of alternative energy sources, the design of inherently safe processes and of integrated reaction/separation technologies (e.g. microreactors and membranes), the process intensification, the reduction...

  7. Industrial and process furnaces principles, design and operation

    CERN Document Server

    Jenkins, Barrie

    2014-01-01

    Furnaces sit at the core of all branches of manufacture and industry, so it is vital that these are designed and operated safely and effi-ciently. This reference provides all of the furnace theory needed to ensure that this can be executed successfully on an industrial scale. Industrial and Process Furnaces: Principles, 2nd Edition provides comprehensive coverage of all aspects of furnace operation and design, including topics essential for process engineers and operators to better understand furnaces. This includes: the combustion process and its control, furnace fuels, efficiency,

  8. The chemical industry of uranium in France; L'industrie chimique de l'uranium en France

    Energy Technology Data Exchange (ETDEWEB)

    Goldschmidt, B. [Commissariat a l' Energie Atomique, Paris (France). Centre d' Etudes Nucleaires

    1955-07-01

    The actual CEA program is concerned with the construction of two large graphite reactors, each of those containing at least one hundred tons of uranium metal with nuclear purity. The uranium for these two reactors will be regularly supplied by new resources discovered in France and Madagascar in the last five years. The working and treatment of such ore have led to the creation of an important french industry of which the general outline and principle are described. The operated ores have got different natures and concentration, individual characteristics are described for the main ores.The most high-grade ore are transported to a central plant in Bouchet near Paris; the low-grade ore are concentrated by physical methods or chemical processes of which principles and economy are studied with constancy. The acid processes are the only used until now, although the carbonated alkaline processes has been studied in France. The next following steps after the acid process until the obtention of uranium rich concentrate are described. The purification steps of uranium compounds to nuclear purity material are described as well as the steps to elaborate metal of which the purity grade will be specify. Finally, the economic aspects of uranium production difficulty will be considered in relation with technical progresses which we can expect to achieve in the future. (M.P.)

  9. Substitution of Organic Solvents in Selected Industrial Cleaning Processes

    DEFF Research Database (Denmark)

    Jacobsen, Thomas; Rasmussen, Pia Brunn

    1997-01-01

    can be replaced with monoesters of fatty acids from vegetable oils (VOFA). The paper describes the selection of other industrial cleaning or degreasing processes where VOC could be replaced by VOFA. Manual degreasing and cleaning processes in metal industry, maintenance and repair of vehicles......Volatile organic solvents (VOC)are becoming increasingly unwanted in industrial processes. Substitution of VOC with non-volatile, low-toxic compounds is a possibility to reduce VOC-use. It has been successfully demonstrated, that organic solvents used in cleaning processes in sheet offset printing......, and industrial coating processes are likely candidates for substitution of VOC with VOFA. Requirements to the resulting surfaces may, however, hinder the replacement. This is especially important when the surface has to be coated in a subsequent step....

  10. Application of the geothermal energy in the industrial processes

    International Nuclear Information System (INIS)

    In the worldwide practice, the geothermal energy application, as an alternative energy resource, can be of great importance. This is especially case in the countries where exceptional natural geothermal potential exists. Despite using geothermal energy for both greenhouses heating and balneology, the one can be successfully implemented in the heat requiring industrial processes. This kind of use always provides greater annual heat loading factor, since the industrial processes are not seasonal (or not the greater part of them). The quality of the geothermal resources that are available in Europe, dictates the use within the low-temperature range technological processes. However, these processes are significantly engaged in different groups of processing industries. But, beside this fact the industrial application of geothermal energy is at the beginning in the Europe. (Original)

  11. China Plastics Industry (2011) China Plastics Processing Industry Association

    Institute of Scientific and Technical Information of China (English)

    Li Ying

    2012-01-01

    General situation of China plastics industry in 2011 was reviewed, including the output and export/import of plastics products, synthetic resins,and plastics processing machinery, as well as major economic data, such as the total industrial values, sales and profits of plastics products, etc. Analysis of the market of plastics products in 2011 was made, and the developing trend of China plastics industry in 2012 was proposed.

  12. The process matters: cyber security in industrial control systems

    NARCIS (Netherlands)

    Hadžiosmanović, Dina

    2014-01-01

    An industrial control system (ICS) is a computer system that controls industrial processes such as power plants, water and gas distribution, food production, etc. Since cyber-attacks on an ICS may have devastating consequences on human lives and safety in general, the security of ICS is important. I

  13. Geopolymers: Structures, Processing, Properties and Industrial applications

    Energy Technology Data Exchange (ETDEWEB)

    Provis, J.L.; van Deventer, J.S.J. (eds.) [University of Melbourne, Vic. (Australia)

    2009-06-15

    A geopolymer is a solid aluminosilicate material usually formed by alkali hydroxide or alkali silicate activation of a solid precursor such as coal fly ash, calcined clay and/or metallurgical slag. Part one discusses the synthesis and characterisation of geopolymers with chapters on topics such as fly ash chemistry and inorganic polymer cements, geopolymer precursor design, nanostructure/microstructure of metakaolin and fly ash geopolymers, and geopolymer synthesis kinetics. Part two reviews the manufacture and properties of geopolymers including accelerated ageing of geopolymers, chemical durability, engineering properties of geopolymer concrete, producing fire and heat-resistant geopolymers, utilisation of mining wastes and thermal properties of geopolymers. Part three covers applications of geopolymers with coverage of topics such as commercialisation of geopolymers for construction, as well as applications in waste management. Chapters of particular relevance are: Fly ash glass chemistry and inorganic polymer cements by L.M. Keyte, University of Melbourne, Australia; Nanostructure/microstructure of metakaolin geopolymers by A. Fernanez-Jimenez and A. Palomo, Eduardo Torroja Institute, Spain; Utilisation of mining wastes to produce geopolymer binders by F. Pacheco-Torgal and S. Jalali, University of Minho and J.P. Castro-Gomes, University of Beira Interior, Portugal.

  14. Greening Food Processing Industry in Vietnam: Putting Industrial Ecology to Work

    NARCIS (Netherlands)

    Tran Thi My Dieu,

    2003-01-01

    The significant contribution to Vietnam's gross domestic product over the years give evidence of the important role of food processing industry in the economic and industrial development of the country. This is even more relevant from now onwards, as it is Vietnam's development strategy to become on

  15. High-grade use of waste propane streams in the Dutch chemical industry. An exploratory study in the context of the Chemical Industry Roadmap; Hoogwaardig gebruik van reststromen propaan in de Nederlandse chemische industrie. Een verkenning binnen de Routekaart Chemie

    Energy Technology Data Exchange (ETDEWEB)

    De Buck, A.; Afman, M.R.; Croezen, H.J.; Van Lieshout, M.

    2012-09-15

    In the context of the Dutch chemical industry's Roadmap the industry is actively seeking concrete ways of improving the efficiency of its products and processes. One option is to make higher-grade use of current waste streams, as feedstocks for other products, for example. This study focuses on propane waste streams from the oil and gas processing industry. Today these are used partly as fuel (fuel gas) but there are no technical barriers to converting propane to propylene, which can then be used as a feedstock. Higher-grade use of this particular waste stream leads to CO2 emission reductions in the production chain. Given the high market price of propylene, such a move may also be economically attractive. The study focuses on the Rotterdam region, because propane suppliers and companies seeking propylene are in closest proximity there [Dutch] In het kader van de Routekaart Chemie is de chemische industrie actief op zoek naar concrete opties om in haar processen en producten de efficiency te verhogen. Een route is daarbij om reststromen hoogwaardiger te benutten en in te zetten als grondstof voor andere producten. Dit onderzoek richt zich op reststromen propaan uit de olie- en gasverwerkende industrie. Deze worden nu deels als brandstof (stookgas) ingezet maar technisch is het mogelijk propaan om te zetten in propeen, dat als grondstof voor de chemische industrie kan worden gebruikt. Door het hoogwaardiger benutten van deze reststroom wordt in de keten een reductie van CO2 gerealiseerd. Tegelijk kan het economisch interessant zijn, vanwege de hoge marktprijzen van propeen. De studie focust op de regio Rotterdam, omdat leveranciers van propaan en afnemers van propeen daar het meest dichtbij elkaar gevestigd zijn.

  16. Secure VM for Monitoring Industrial Process Controllers

    Energy Technology Data Exchange (ETDEWEB)

    Dasgupta, Dipankar [ORNL; Ali, Mohammad Hassan [University of Memphis; Abercrombie, Robert K [ORNL; Schlicher, Bob G [ORNL; Sheldon, Frederick T [ORNL; Carvalho, Marco [Institute of Human and Machine Cognition

    2011-01-01

    In this paper, we examine the biological immune system as an autonomic system for self-protection, which has evolved over millions of years probably through extensive redesigning, testing, tuning and optimization process. The powerful information processing capabilities of the immune system, such as feature extraction, pattern recognition, learning, memory, and its distributive nature provide rich metaphors for its artificial counterpart. Our study focuses on building an autonomic defense system, using some immunological metaphors for information gathering, analyzing, decision making and launching threat and attack responses. In order to detection Stuxnet like malware, we propose to include a secure VM (or dedicated host) to the SCADA Network to monitor behavior and all software updates. This on-going research effort is not to mimic the nature but to explore and learn valuable lessons useful for self-adaptive cyber defense systems.

  17. Mechanistic, kinetic, and processing aspects of tungsten chemical mechanical polishing

    Science.gov (United States)

    Stein, David

    This dissertation presents an investigation into tungsten chemical mechanical polishing (CMP). CMP is the industrially predominant unit operation that removes excess tungsten after non-selective chemical vapor deposition (CVD) during sub-micron integrated circuit (IC) manufacture. This work explores the CMP process from process engineering and fundamental mechanistic perspectives. The process engineering study optimized an existing CMP process to address issues of polish pad and wafer carrier life. Polish rates, post-CMP metrology of patterned wafers, electrical test data, and synergy with a thermal endpoint technique were used to determine the optimal process. The oxidation rate of tungsten during CMP is significantly lower than the removal rate under identical conditions. Tungsten polished without inhibition during cathodic potentiostatic control. Hertzian indenter model calculations preclude colloids of the size used in tungsten CMP slurries from indenting the tungsten surface. AFM surface topography maps and TEM images of post-CMP tungsten do not show evidence of plow marks or intergranular fracture. Polish rate is dependent on potassium iodate concentration; process temperature is not. The colloid species significantly affects the polish rate and process temperature. Process temperature is not a predictor of polish rate. A process energy balance indicates that the process temperature is predominantly due to shaft work, and that any heat of reaction evolved during the CMP process is negligible. Friction and adhesion between alumina and tungsten were studied using modified AFM techniques. Friction was constant with potassium iodate concentration, but varied with applied pressure. This corroborates the results from the energy balance. Adhesion between the alumina and the tungsten was proportional to the potassium iodate concentration. A heuristic mechanism, which captures the relationship between polish rate, pressure, velocity, and slurry chemistry, is presented

  18. Waste heat utilization in industrial processes

    Science.gov (United States)

    Weichsel, M.; Heitmann, W.

    1978-01-01

    A survey is given of new developments in heat exchangers and heat pumps. With respect to practical applications, internal criteria for plant operation are discussed. Possibilities of government support are pointed out. Waste heat steam generators and waste heat aggregates for hot water generation or in some cases for steam superheating are used. The possibilities of utilization can be classified according to the economic improvements and according to their process applications, for example, gascooling. Examples are presented for a large variety of applications.

  19. Dust exposures in the wood processing industry.

    Science.gov (United States)

    Alwis, U; Mandryk, J; Hocking, A D; Lee, J; Mayhew, T; Baker, W

    1999-01-01

    Workers at four different woodworking processes--two logging sites, four sawmills, one major woodchipping operation, and five joineries situated in the state of New South Wales in Australia--were studied for personal inhalable dust exposures (N = 182). The geometric mean exposure at logging sites was 0.6 mg/m3 (N = 7), sawmills 1.6 mg/m3 (N = 93), woodchipping 1.9 mg/m3 (N = 9), and joineries 3.7 mg/m3 (N = 66). Overall, 62% of the exposures exceeded the current standards. Among joineries, 95% of the hardwood exposures and 35% of the softwood exposures were above the relevant standards. A majority of workers (approximately 90%) did not wear appropriate respirators approved for wood dust, while the ones who did wear them, used them on average less than 50% of the time. The significant determinants of personal wood dust exposures (n = 163) were found to be local exhaust ventilation, job title, use of handheld tools, cleaning method used, use of compressed air, and green or dry wood processed. Type of wood processed (softwood or hardwood) was not found to be statistically significant.

  20. Simplification of Process Integration Studies in Intermediate Size Industries

    DEFF Research Database (Denmark)

    Dalsgård, Henrik; Petersen, P. M.; Qvale, Einar Bjørn

    2002-01-01

    It can be argued that the largest potential for energy savings based on process integration is in the intermediate size industry. But this is also the industrial scale in which it is most difficult to make the introduction of energy saving measures economically interesting. The reasons...... associated with a given process integration study in an intermediate size industry. This is based on the observation that the systems that eventually result from a process integration project and that are economically and operationally most interesting are also quite simple. Four steps that may be used...... separately or in series ahead of or simultaneously with the conventional process integration procedures (for example, the pinch point method) are described and are applied to an industrial case study. It might be feared that the use of preselections and groupings would limit the "freedom of movement...

  1. Industrialization drive of radiation processing for economic growth in China

    International Nuclear Information System (INIS)

    The transfer of research and development achievements of radiation processing to routine industrial applications in China is reviewed. While making a brief survey of historical background, the paper indicates the different roles that various domestic organizations played in the industrialization drive of radiation processing. Among them the Government's role is the most important one. In accordance with recent growth of the number of industrial radiation facilities (e.g. cobalt-60 irradiators and electron beam accelerators) and current application of radiation processing in main fields in different parts of the country, it can be said that a new radiation processing industry is shaping up in its developing stage to satisfy the growing requirements for economic booming in China. (16 refs.)

  2. Integration Processes in Iron and Steel Industry of Ukrain

    OpenAIRE

    Yaldin Igor V.

    2010-01-01

    In article the basic tendencies of development of integration processes in iron and steel industry of Ukraine are considered. Preconditions and stimulus of integration of the enterprises of branch, and also feature of their realization are defined.

  3. Research on the competitiveness and development strategy of china's modern coal chemical industry

    Science.gov (United States)

    Wang, Q.; Han, Y. J.; Yu, Z. F.

    2016-08-01

    China's modern coal chemical industry has grown into a certain scale after over a decade of development, and remarkable progress has been made in key technologies. But as oil price collapsed since 2015, the economic benefit of the industry also slumped, with loud controversies in China over the necessity of modern coal chemical industry. The research believes that the modern coal chemical industry plays a positive role in the clean and sustainable exploitation of coal in China. It makes profit when oil price is no lower than 60/bbl, and outperforms petrochemical in terms of cost effectiveness when the price is between 60/bbl and 80/bbl. Given the low oil price and challenges posed by environmental protection and water restraints, we suggest that the state announce a guideline quickly, with adjusted tax policies and an encouragement to technological innovation, so that the modern coal chemical industry in China can grow sound and stable.

  4. A multi-attribute Systemic Risk Index for comparing and prioritizing chemical industrial areas

    International Nuclear Information System (INIS)

    Measures taken to decrease interdependent risks within chemical industrial areas should be based on quantitative data from a holistic (cluster-based) point of view. Therefore, this paper examines the typology of networks representing industrial areas to formulate recommendations to more effectively protect a chemical cluster against existing systemic risks. Chemical industrial areas are modeled as two distinct complex networks and are prioritized by computing two sub-indices with respect to existing systemic safety and security risks (using Domino Danger Units) and supply chain risks (using units from an ordinal expert scale). Subsequently, a Systemic Risk Index for the industrial area is determined employing the Borda algorithm, whereby the systemic risk index considers both a safety and security network risk index and a supply chain network risk index. The developed method allows decreasing systemic risks within chemical industrial areas from a holistic (inter-organizational and/or inter-cluster) perspective. An illustrative example is given.

  5. Globalization : the challenge of the 1990s for the chemical industry

    International Nuclear Information System (INIS)

    The challenges facing the chemical industry in Canada were discussed. In recent years, Canada has scored low in polls measuring public confidence in the chemical industry. The industry is also suffering from continuing recession, global competition, increased environmental demands and strict legislation. The impact of globalization, total quality management, free trade, environmental concerns, and government policies on the chemical industry were reviewed. In the view of this author (President and CEO of Dow Chemicals) globalization is not a matter of choice, it is an industry imperative. Survival in the globalized economy will require not only to be successful competitors, but even more importantly to be successful cooperators with other stakeholders, and successful in forming partnerships with customers

  6. ADVANCED OXIDATION PROCESSES (AOP'S FOR THE TREATMENT OF CCL CHEMICALS

    Science.gov (United States)

    Research on treatment of Contaminant Candidate List (CCL) chemicals is being conducted. Specific groups of contaminants on the CCL will be evaluated using numerous advanced oxidation processes (AOPs). Initially, these CCL contaminants will be evaluated in groups based on chemical...

  7. Specification process reengineering: concepts and experiences from Danish industry

    DEFF Research Database (Denmark)

    Hansen, Benjamin Loer; Riis, Jesper; Hvam, Lars

    2003-01-01

    This paper presents terminologies and concepts related to the IT automation of specification processes in companies manufacturing custom made products. Based on 11 cases from the Danish industry the most significant development trends are discussed.......This paper presents terminologies and concepts related to the IT automation of specification processes in companies manufacturing custom made products. Based on 11 cases from the Danish industry the most significant development trends are discussed....

  8. Proceedings of the solar industrial process heat symposium

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    The purpose of the symposium was to review the progress of various solar energy systems currently under design for supplying industrial process heat. Formal presentations consisted of a review of solar energy applications in industrial process heat as well as several on-going project reviews. An Open Forum was held to solicit the comments of the participants. The recommendations of this Open Forum are included in these proceedings. Eighteen papers were included. Separate abstracts were prepared for each paper.

  9. Improving industrial designers work process by involving user research

    DEFF Research Database (Denmark)

    Dai, Zheng; Ómarsson, Ólafur

    2011-01-01

    . User research is part of user centered design (UCD). UCD has a reputation for subjective and reflective practice. In this paper there are two example cases. One is conducted by a classical industrial design process, and another is costing half of energy and time in user research. These examples......With changing times, new technologies and more opinionated consumers, the modern industrial designer has found himself in need of fresher and more up to date approaches in his daily work. In a fast moving industry, the designer needs to keep a thinking process of dynamic and subjective attitude...... will give the grounding for believing that the industrial designer needs to adopt user research methods to a level where he can still continue to work under the very nature of industrial design that has made it a successful practice for the last century. The combing of the approaches and attitude will help...

  10. Industrial Process Identification and Control Design Step-test and Relay-experiment-based Methods

    CERN Document Server

    Liu, Tao

    2012-01-01

      Industrial Process Identification and Control Design is devoted to advanced identification and control methods for the operation of continuous-time processes both with and without time delay, in industrial and chemical engineering practice.   The simple and practical step- or relay-feedback test is employed when applying the proposed identification techniques, which are classified in terms of common industrial process type: open-loop stable; integrating; and unstable, respectively. Correspondingly, control system design and tuning models that follow are presented for single-input-single-output processes.   Furthermore, new two-degree-of-freedom control strategies and cascade control system design methods are explored with reference to independently-improving, set-point tracking and load disturbance rejection. Decoupling, multi-loop, and decentralized control techniques for the operation of multiple-input-multiple-output processes are also detailed. Perfect tracking of a desire output trajectory is realiz...

  11. Characterization of industrial process waste heat and input heat streams

    Energy Technology Data Exchange (ETDEWEB)

    Wilfert, G.L.; Huber, H.B.; Dodge, R.E.; Garrett-Price, B.A.; Fassbender, L.L.; Griffin, E.A.; Brown, D.R.; Moore, N.L.

    1984-05-01

    The nature and extent of industrial waste heat associated with the manufacturing sector of the US economy are identified. Industry energy information is reviewed and the energy content in waste heat streams emanating from 108 energy-intensive industrial processes is estimated. Generic types of process equipment are identified and the energy content in gaseous, liquid, and steam waste streams emanating from this equipment is evaluated. Matchups between the energy content of waste heat streams and candidate uses are identified. The resultant matrix identifies 256 source/sink (waste heat/candidate input heat) temperature combinations. (MHR)

  12. Development of the software for energy savings in chemical processes. 3

    Energy Technology Data Exchange (ETDEWEB)

    Cho, S.C.; Kim, K.I.; Park, J.K. [Korea Inst. of Energy Research, Taejon (Korea, Republic of)

    1995-12-01

    Chemical industry is the most energy consuming industry in the nation and the thermal separation processes such as distillation and drying are the major energy consuming processes. Especially, distillation processes consume about 40% of energy in chemical industry. Special interest in energy saving in thermal separation processes is necessary and a software to select appropriate technology is required. On the first year term of this project, energy saving technology was composed. A program for selecting adequate technology was developed based on the algorithm on the second year term of this project. On this year term of the project, soft-wares for optimizing thermal insulation thickness and optimal design of multi-effect mechanical vapor re-compression evaporator were developed. Also, methods to calculate efficiency of distillation feed preheater and optimize feed preheater were introduced. (author). 16 refs., 29 figs., 2 tabs.

  13. Science, technology and the industrialization of laser-driven processes

    Science.gov (United States)

    Davis, J. I.; Paisner, J. A.

    1985-05-01

    Members of the laser program at Lawrence Livermore National Laboratory (LLNL) potential applications of lasers in industry, some of which are: isotope separation, cleanup of radioactive waste, trace impurity removal, selective chemical reactions, photochemical activation or dissociation of gases, control of combustion particulates, crystal and powder chemistry, and laser induced biochemistry are reviewed. Many of these areas are currently under active study in the community. The investigation at LLNL focused on laser isotope separation of atomic uranium because of the large demand and high product enrichment price for material used as fuel in commercial light-water nuclear power reactors. They also believed that once the technology was fully developed and deployed, it could be applied directly to separating many elements economicprogram at LLNL has an extensive uranium and plutonium program of $100 M in Fy85 and a minor research program for other elements. This report describes the AVLIS program conducted covering the following topics: candidate elements, separative work units, sepctroscopic selectivety, major systems, facilities, integrated process model, multivariable sensitivity studies, world market, and US enrichment enterprise.

  14. Advanced processes for minor actinides recycling: studies towards potential industrialization

    International Nuclear Information System (INIS)

    In June 2006, a new act on sustainable management of radioactive waste was voted by the French parliament with a national plan on radioactive materials and radioactive waste management (PNG-MDR). Concerning partitioning and transmutation, the program is connected to 4. generation reactors, in which transmutation of minor actinides could be operated. In this frame, the next important milestone is 2012, with the assessment of the possible transmutation roads, which are either homogeneous recycling of the minor actinides in the whole reactor fleet, with a low content of M.A (∼3%) in all fuel assemblies, or heterogeneous recycling of the minor actinides in about one third of the reactor park, with a higher content of M.A. (∼20%) in dedicated targets dispatched in the periphery of the reactor. Advanced processes for the recycling of minor actinides are being developed to address the challenges of these various management options. An important part of the program consists in getting closer to process implementation conditions. The processes based on liquid-liquid extraction benefit from the experience gained by operating the PUREX process at the La Hague plant. In the field of extracting apparatus, a large experience is available. In the field of extracting apparatus, a large experience is already available. Nevertheless, the processes present specificities which have to be considered more precisely. They have been classified in the following fields: - Evolution of the simulation codes, including phenomenological representations: with such a simulation tool, it will be possible to assess operating tolerances, lead sensitivity studies and calculate transient states; - Definition of the implementation conditions in continuous contactors (such as pulse columns), according to the extractant physico-chemical characteristics; - Scale-up of new extractants, such as malonamides used in the DIAMEX process, facing purity specifications and costs estimation; - Solvent clean

  15. The market for technology in the chemical industry: causes and consequences

    OpenAIRE

    Arora, Ashish; Fosfuri, Andrea

    2000-01-01

    The chemical industry provides a good example of the existence and functioning of a market for technology. This paper suggests that, in chemicals, patents have played a key role in facilitating the purchase and sale of technology. However, patents alone would not be sufficient for the rise of a market for technology. We suggest that the presence of specialized engineering firms has contributed to make chemical technology more widespread and has forced the large chemical corporations ...

  16. Logistic paradigm for industrial solid waste treatment processes

    Directory of Open Access Journals (Sweden)

    Janusz Grabara

    2014-12-01

    Full Text Available Due to the fact that industrial waste are a growing problem, both economic and environmental as their number is increasing every year, it is important to take measures to correctly dealing wi th industrial waste. This article presents the descriptive model of logistics processes concerning the management of industrial waste. In this model the flow of waste begins in the place of production and ends at their disposal. The article presents the concept of logistics model in graphical form together with an analysis of individual processes and their linkages, and opportunities to improve flow of industrial waste streams. Furthermore, the model allows for justification of the relevance of use logistics and its processes for waste management

  17. Considerations about the licensing process of special nuclear industrial facilities

    Energy Technology Data Exchange (ETDEWEB)

    Talarico, M.A., E-mail: talaricomarco@hotmail.com [Marinha do Brasil, Rio de Janeiro, RJ (Brazil). Coordenacao do Porgrama de Submarino com Propulsao Nuclear; Melo, P.F. Frutuoso e [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

    2015-07-01

    This paper brings a discussion about the challenges involved in the development of a new kind of nuclear facility in Brazil, a naval base for nuclear submarines, with attention to the licensing process and considerations about the risk-informed decision making application to the licensing process. Initially, a model of such a naval base, called in this work, special industrial facility, is proposed, with its systems and respective sets of basic requirements, in order to make it possible the accomplishment of the special industrial facility support function to the nuclear submarine. A discussion about current challenges to overcome in this project is presented: the challenges due to the new characteristics of this type of nuclear facility; existence of several interfaces between the special industrial facilities systems and nuclear submarine systems in design activities; lack of specific regulation in Brazil to allow the licensing process of special industrial facilities by the nuclear safety authority; and comments about the lack of information from reference nuclear facilities, as is the case with nuclear power reactors (for example, the German Grafenrheinfeld nuclear plant is the reference plant for the Brazilian Angra 2 nuclear plant). Finally, in view of these challenges, an analysis method of special industrial facility operational scenarios to assist the licensing process is proposed. Also, considerations about the application of risk-informed decision making to the special industrial facility activity and licensing process in Brazil are presented. (author)

  18. Valorization of industrial waste and by-product streams via fermentation for the production of chemicals and biopolymers.

    Science.gov (United States)

    Koutinas, Apostolis A; Vlysidis, Anestis; Pleissner, Daniel; Kopsahelis, Nikolaos; Lopez Garcia, Isabel; Kookos, Ioannis K; Papanikolaou, Seraphim; Kwan, Tsz Him; Lin, Carol Sze Ki

    2014-04-21

    The transition from a fossil fuel-based economy to a bio-based economy necessitates the exploitation of synergies, scientific innovations and breakthroughs, and step changes in the infrastructure of chemical industry. Sustainable production of chemicals and biopolymers should be dependent entirely on renewable carbon. White biotechnology could provide the necessary tools for the evolution of microbial bioconversion into a key unit operation in future biorefineries. Waste and by-product streams from existing industrial sectors (e.g., food industry, pulp and paper industry, biodiesel and bioethanol production) could be used as renewable resources for both biorefinery development and production of nutrient-complete fermentation feedstocks. This review focuses on the potential of utilizing waste and by-product streams from current industrial activities for the production of chemicals and biopolymers via microbial bioconversion. The first part of this review presents the current status and prospects on fermentative production of important platform chemicals (i.e., selected C2-C6 metabolic products and single cell oil) and biopolymers (i.e., polyhydroxyalkanoates and bacterial cellulose). In the second part, the qualitative and quantitative characteristics of waste and by-product streams from existing industrial sectors are presented. In the third part, the techno-economic aspects of bioconversion processes are critically reviewed. Four case studies showing the potential of case-specific waste and by-product streams for the production of succinic acid and polyhydroxyalkanoates are presented. It is evident that fermentative production of chemicals and biopolymers via refining of waste and by-product streams is a highly important research area with significant prospects for industrial applications.

  19. BIOMASS AS A RENEWABLE SOURCE OF CHEMICALS FOR INDUSTRIAL APPLICATIONS

    OpenAIRE

    Ahmed, M. Murtala; Nasri, N. Shawal; Hamza, D. Usman

    2012-01-01

    Worldwide demand for cleaner burning fuels and ‘clean’ chemicals has been increasing from the global issues of environmental concern. This lead to a greater utilization of renewable resources to replace the old and existing fossil based feedstock for liquid fuels and chemicals. The ability to re-grow harvested biomass and recapture the carbon emitted to the atmosphere through photosynthesis allows the possibility of carbon neutrality encouraged the use of biomass. Moreso, the unstable rise of...

  20. Optimization of the extraction process of polyphenols from cashew apple agro-industrial residues

    OpenAIRE

    Renata Araújo Milanez de Sena Andrade; Maria Inês Sucupira Maciel; Andrelina Maria Pinheiro Santos; Enayde de Almeida Melo

    2015-01-01

    The goal of this study was to determine the chemical composition of cashew apples agro-industrial residue and optimize the process of polyphenols extraction in this residue. The extraction process conditions were defined using a 24-1 fractional factorial experimental design using acetone and methanol as solvents. The independent variables were: time (30 to 90 min), temperature (30 to 50 °C), solvent concentrations (50% to 90%), agitation speed (100 to 300 rpm); the dependent variables were: t...

  1. Sorghum as a renewable feedstock for production of fuels and industrial chemicals

    Directory of Open Access Journals (Sweden)

    Nhuan P. Nghiem

    2016-01-01

    Full Text Available Considerable efforts have been made in the USA and other countries to develop renewable feedstocks for production of fuels and chemicals. Among these, sorghum has attracted strong interest because of its many good characteristics such as rapid growth and high sugar accumulation, high biomass production potential, excellent nitrogen usage efficiency, wide adaptability, drought resistance, and water lodging tolerance and salinity resistance. The ability to withstand severe drought conditions and its high water usage efficiency make sorghum a good renewable feedstock suitable for cultivation in arid regions, such as the southern US and many areas in Africa and Asia. Sorghum varieties include grain sorghum, sweet sorghum, and biomass sorghum. Grain sorghum, having starch content equivalent to corn, has been considered as a feedstock for ethanol production. Its tannin content, however, may cause problems during enzyme hydrolysis. Sweet sorghum juice contains sucrose, glucose and fructose, which are readily fermentable by Saccharomyces cerevisiae and hence is a good substrate for ethanol fermentation. The enzyme invertase, however, needs to be added to convert sucrose to glucose and fructose if the juice is used for production of industrial chemicals in fermentation processes that employ microorganisms incapable of metabolizing sucrose. Biomass sorghum requires pretreatment prior to enzymatic hydrolysis to generate fermentable sugars to be used in the subsequent fermentation process. This report reviews the current knowledge on bioconversion of sorghum to fuels and chemicals and identifies areas that deserve further studies.

  2. High-Throughput Industrial Coatings Research at The Dow Chemical Company.

    Science.gov (United States)

    Kuo, Tzu-Chi; Malvadkar, Niranjan A; Drumright, Ray; Cesaretti, Richard; Bishop, Matthew T

    2016-09-12

    At The Dow Chemical Company, high-throughput research is an active area for developing new industrial coatings products. Using the principles of automation (i.e., using robotic instruments), parallel processing (i.e., prepare, process, and evaluate samples in parallel), and miniaturization (i.e., reduce sample size), high-throughput tools for synthesizing, formulating, and applying coating compositions have been developed at Dow. In addition, high-throughput workflows for measuring various coating properties, such as cure speed, hardness development, scratch resistance, impact toughness, resin compatibility, pot-life, surface defects, among others have also been developed in-house. These workflows correlate well with the traditional coatings tests, but they do not necessarily mimic those tests. The use of such high-throughput workflows in combination with smart experimental designs allows accelerated discovery and commercialization.

  3. Total chemical management in photographic processing

    Science.gov (United States)

    Luden, Charles; Schultz, Ronald

    1985-01-01

    The mission of the U. S. Geological Survey's Earth Resources Observation Systems (EROS) Data Center is to produce high-quality photographs of the earth taken from aircraft and Landsat satellite. In order to meet the criteria of producing research-quality photographs, while at the same time meeting strict environmental restrictions, a total photographic chemical management system was installed. This involved a three-part operation consisting of the design of a modern chemical analysis laboratory, the implementation of a chemical regeneration system, and the installation of a waste treatment system, including in-plant pretreatment and outside secondary waste treatment. Over the last ten years the result of this program has yielded high-quality photographs while saving approximately 30,000 per year and meeting all Environmental Protection Agency (EPA) restrictions.

  4. HACCP and quality system in the food processing industry

    OpenAIRE

    Turubatović Lazar; Vranić Vojin; Baras Josip K.

    2002-01-01

    HACCP (Hazard Analysis and Critical Control Points) is an indispensable contemporary system of process control in the food processing industry. In its original meaning this control procedure includes hazard analysis and identification of the points in the production process where the product contamination is reasonably likely to occur resulting in an unsafe product. At the critical points the control of the production process should be severer in order to eliminate or reduce the product safet...

  5. Applications of sonochemistry in Russian food processing industry.

    Science.gov (United States)

    Krasulya, Olga; Shestakov, Sergey; Bogush, Vladimir; Potoroko, Irina; Cherepanov, Pavel; Krasulya, Boris

    2014-11-01

    In food industry, conventional methodologies such as grinding, mixing, and heat treatment are used for food processing and preservation. These processes have been well studied for many centuries and used in the conversion of raw food materials to consumable food products. This report is dedicated to the application of a cost-efficient method of energy transfer caused by acoustic cavitation effects in food processing, overall, having significant impacts on the development of relatively new area of food processing such as food sonochemistry.

  6. Study on the Competitiveness of the Romanian Meat Processing Industry

    Directory of Open Access Journals (Sweden)

    Silvius Stanciu

    2015-11-01

    Full Text Available Meat processing represents a strategic sector that can significantly contribute to local food industry competitiveness and national food security. The generous natural resources available to Romania and the tradition in animal husbandry can provide adequate raw materials for the processing industry in order to cover domestic consumption needs and obtain substantial revenues by export. Currently, Romanian meat market is dependent on the imports of meat, as carcasses or processed products. There have been mainly live animals or semi-finished products which are exported, fact which led to an imbalance of trade and to low revenues for the domestic meat industry. This article proposes an analysis of the local meat processing industry in terms of production, consumption and trade transactions, assessed in the international context of the meat market. The study indicates that in the last few years, Romania has recorded significant progress in the meat processing and production domain; nevertheless, the financial performance of the local companies is inferior to that of the EU companies. Except the poultry meat and mutton sectors, in which the export value exceeds imports, the other sectors show a deficit, the domestic demand not being covered. The low concentration degree of the companies from the meat processing industry show a continued market fragmentation and a growth potential for the existing companies.

  7. New process modeling [sic], design, and control strategies for energy efficiency, high product quality, and improved productivity in the process industries. Final project report

    Energy Technology Data Exchange (ETDEWEB)

    Ray, W. Harmon

    2002-06-05

    This project was concerned with the development of process design and control strategies for improving energy efficiency, product quality, and productivity in the process industries. In particular, (i) the resilient design and control of chemical reactors, and (ii) the operation of complex processing systems, was investigated. Specific topics studied included new process modeling procedures, nonlinear controller designs, and control strategies for multiunit integrated processes. Both fundamental and immediately applicable results were obtained. The new design and operation results from this project were incorporated into computer-aided design software and disseminated to industry. The principles and design procedures have found their way into industrial practice.

  8. Large Radiation Sources for Industrial Processes. Proceedings of a Symposium on the Utilization of Large Radiation Sources and Accelerators in Industrial Processing

    International Nuclear Information System (INIS)

    Chemical industries are progressively recognizing the usefulness of high-energy ionizing radiation for initiating chemical syntheses and polymerization reactions. Intense sources of radiation are now available both from particle accelerators and from radioisotopes produced, in quantity by nuclear reactors. The chemical reactions initiated by radiation are easily controlled: many free-radical reactions may be initiated, and for some ionic reactions, radiation obviates the need for a catalyst. Radiation processing, along with other improvements in technology, has already shown significant economic benefits in such fields as the production of composite materials and surface coatings, the modification of textiles and the processing of plastics. Following two previous meetings on the subject in Warsaw (1959) and in Salzburg (1963), the International Atomic Energy Agency convened a third Symposium, on the Utilization of Large Radiation Sources and Accelerators in Industrial Processing, in Munich from 18 to 22 August 1969. About 190 participants from 29 countries and five international organizations attended the meeting to join the discussion of 50 papers. The four main topics of the Symposium were: Chemical synthesis Polymerization and the modification of polymers Dosimetry Engineering. Many developments were reported in radiation-induced polymerization and in the modification of polymers through grafting and cross-linking. There were descriptions, not only of pilot plants, but also of the design of radiation systems for continuous-flow production. Many papers dealt both with theory and practice and some papers identified areas in which intensive research is likely to bring forth new economic applications of radiation processing. These Proceedings, containing the papers and the discussions, will, it is hoped, help to promote this technology as one of the major contributions of nuclear techniques to modern industry

  9. Implementation Plan for Chemical Industry R&D Roadmap for Nanomaterials by Design

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2006-04-01

    The purpose of this effort is to develop an implementation plan to realize the vision and goals identified in the Chemical Industry R&D Roadmap for Nanomaterials By Design: From Fundamentals to Function.

  10. Factors Influencing the Spatial Distribution of Organochlorine Pesticides in Soils surrounding Chemical Industrial Parks

    NARCIS (Netherlands)

    Wang, G.; Lu, Y.L.; Wang, T.Y.; Zhang, X.; Han, J.Y.; Luo, W.; Shi, Y.J.; Li, J.; Jiao, W.T.

    2009-01-01

    Topsoil samples (n = 105) were collected to Study the distribution of dichlorodiphenyltrichloroethane (DDT) and hexachlorocyclohexane (HCH) residues in the vicinity of chemical industrial parks in Tianjin, China. The occurrence and distribution of target organochlorine pesticides (OCPs) were mapped

  11. Society of the plastic industry process emission initiatives

    Science.gov (United States)

    Mcdermott, Joseph

    1994-01-01

    At first view, plastics process emissions research may not seem to have much bearing on outgassing considerations relative to advanced composite materials; however, several parallel issues and cross currents are of mutual interest. The following topics are discussed: relevance of plastics industry research to aerospace composites; impact of clean air act amendment requirements; scope of the Society of the Plastics Industry, Inc. activities in thermoplastic process emissions and reinforced plastics/composites process emissions; and utility of SPI research for advanced polymer composites audiences.

  12. Advanced Manufacturing Systems in Food Processing and Packaging Industry

    International Nuclear Information System (INIS)

    In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

  13. Advanced Manufacturing Systems in Food Processing and Packaging Industry

    Science.gov (United States)

    Shafie Sani, Mohd; Aziz, Faieza Abdul

    2013-06-01

    In this paper, several advanced manufacturing systems in food processing and packaging industry are reviewed, including: biodegradable smart packaging and Nano composites, advanced automation control system consists of fieldbus technology, distributed control system and food safety inspection features. The main purpose of current technology in food processing and packaging industry is discussed due to major concern on efficiency of the plant process, productivity, quality, as well as safety. These application were chosen because they are robust, flexible, reconfigurable, preserve the quality of the food, and efficient.

  14. Advances toward industrialization of novel molten salt electrochemical processes.

    Science.gov (United States)

    Ito, Yasuhiko; Nishikiori, Tokujiro; Tsujimura, Hiroyuki

    2016-08-15

    We have invented various novel molten salt electrochemical processes, that can be put to practical use in the fields of energy and materials. These processes are promising from both technological and commercial viewpoints, and they are currently under development for industrial application. To showcase current developments in work toward industrialization, we focus here on three of these processes: (1) electrolytic synthesis of ammonia from water and nitrogen under atmospheric pressure, (2) electrochemical formation of carbon film, and (3) plasma-induced discharge electrolysis to produce nanoparticles. PMID:27265244

  15. Chemical composition, mass closure and sources of atmospheric PM10 from industrial sites in Shenzhen, China

    Institute of Scientific and Technical Information of China (English)

    Gang Wu; Xin Du; Xuefang Wu; Xiao Fu; Shaofei Kong; Jianhua Chen; Zongshuang Wang

    2013-01-01

    Concentrations of atmospheric PM10 and chemical components (including twenty-one elements,nine ions,organic carbon (OC) and elemental carbon (EC)) were measured at five sites in a heavily industrial region of Shenzhen,China in 2005.Results showed that PM10 concentrations exhibited the highest values at 264 μg/m3 at the site near a harbor with the influence of harbor activities.Sulfur exhibited the highest concentrations (from 2419 to 3995 ng/m3) of all the studied elements,which may be related to the influence of coal used as fuel in this area for industrial plants.This was verified by the high mass percentages of SO42-,which accounted for 34.3%-39.7% of the total ions.NO3-/SO42-ratios varied from 0.64-0.71,which implies coal combustion was predominant compared with vehicle emission.The anion/cation ratios range was close to 0.95,indicating anion deficiency in this region.The harbor site showed the highest OC and EC concentrations,with the influence of emission from vessels.Secondary organic carbon accounted for about 22.6%-38.7% of OC,with the highest percentage occurring at the site adjacent to a coal-fired power plant and wood plant.The mass closure model performed well in this heavily industrial region,with significant correlation obtained between chemically determined and gravimetrically measured PM10 mass.The main constituents of PM10 were found to be organic materials (30.9%-69.5%),followed by secondary inorganic aerosol (7.9%-25.0%),crustal materials (6.7%-13.8%),elemental carbon (3.5%-10.8%),sea salt (2.4%-6.2%) and trace elements (2.0%-4.9%) in this heavily industrialized region.Principal component analysis indicated that the main sources for particulate matter in this industrial region were crustal materials and coal/wood combustion,oil combustion,secondary aerosols,industrial processes and vehicle emission.

  16. Hybrid membrane operations in water desalination and industrial process rationalisation.

    Science.gov (United States)

    Drioli, E; Di Profio, G; Curcio, E

    2005-01-01

    Membrane science and technology are recognized today as powerful tools in resolving some important global problems, and developing newer industrial processes, needed from the imperative of sustainable industrial growth. In seawater desalination, for resolving the dramatic increase of freshwater demand in many regions of the world, membrane unitary operations or the combination of some of them in integrated systems are already a real means for producing water from the sea, at lower costs and minimum environmental impact, with a very interesting prospective in particular for poor economy countries. However, membranes are used or are becoming used in some important industrial fields, for developing more efficient productive cycles, with reduced waste of raw-material, reducing the polluting charge by controlling byproduct generation, and reducing overall costs. In the present paper, other than for seawater desalination applications, some industrial applications where membrane technology has led already to match the goal of process intensification are discussed.

  17. Hybrid membrane operations in water desalination and industrial process rationalisation.

    Science.gov (United States)

    Drioli, E; Di Profio, G; Curcio, E

    2005-01-01

    Membrane science and technology are recognized today as powerful tools in resolving some important global problems, and developing newer industrial processes, needed from the imperative of sustainable industrial growth. In seawater desalination, for resolving the dramatic increase of freshwater demand in many regions of the world, membrane unitary operations or the combination of some of them in integrated systems are already a real means for producing water from the sea, at lower costs and minimum environmental impact, with a very interesting prospective in particular for poor economy countries. However, membranes are used or are becoming used in some important industrial fields, for developing more efficient productive cycles, with reduced waste of raw-material, reducing the polluting charge by controlling byproduct generation, and reducing overall costs. In the present paper, other than for seawater desalination applications, some industrial applications where membrane technology has led already to match the goal of process intensification are discussed. PMID:16003989

  18. The planning flexibility bottleneck in food processing industries

    NARCIS (Netherlands)

    van Wezel, W.M.C.; van Donk, D.P.; Gaalman, G.J.C.

    2006-01-01

    Production planners in food processing industries must continuously balance efficient production with flexible performance. On the basis of case studies, we state that flexibility is not only restrained by hard-wired production process characteristics, but also by organizational procedures in the pl

  19. [Food processing industry--the salt shock to the consumers].

    Science.gov (United States)

    Doko Jelinić, Jagoda; Nola, Iskra Alexandra; Andabaka, Damir

    2010-05-01

    Industrial food production and processing is necessarily connected with the use of salt. Salt or sodium chloride is used as a preservative, spice, agent for color maintenance, texture, and to regulate fermentation by stopping the growth of bacteria, yeast and mold. Besides kitchen salt, other types of salt that also contain sodium are used in various technological processes in food preparing industry. Most of the "hidden" salt, 70%-75%, can be brought to the body by using industrial food, which, unfortunately, has been increasingly used due to the modern way of life. Bread and bakery products, meat products, various sauces, dried fish, various types of cheese, fast food, conserved vegetables, ready-made soups and food additives are the most common industrial foods rich in sodium. Many actions have been taken all over the world to restrict salt consumption. The World Health Organization recommends the upper limit of salt input of 5 g per day. These actions appeal to food industry to reduce the proportion of salt in their products. Besides lower salt addition during manufacture, food industry can use salt substitutes, in particular potassium chloride (KCl), in combination with additives that can mask the absence of salt, and flavor intensifiers that also enhance the product salinity. However, food industry is still quite resistant to reducing salt in their products for fear from losing profits.

  20. The 'PROCESO' index: a new methodology for the evaluation of operational safety in the chemical industry

    International Nuclear Information System (INIS)

    The acknowledgement of industrial installations as complex systems in the early 1980s outstands as a milestone in the path to operational safety. Process plants are social-technical complex systems of a dynamic nature, whose properties depend not only on their components, but also on the inter-relations among them. A comprehensive assessment of operational safety requires a systemic approach, i.e. an integrated framework that includes all the relevant factors influencing safety. Risk analysis methodologies and safety management systems head the list of methods that point in this direction, but they normally require important plant resources. As a consequence, their use is frequently restricted to especially dangerous processes often driven by compliance with legal requirements. In this work a new safety index for the chemical industry, termed the 'Proceso' Index (standing for the Spanish terms for PROCedure for the Evaluation of Operational Safety), has been developed. PROCESO is based on the principles of systems theory, has a tree-like structure and considers 25 areas to guide the review of plant safety. The method uses indicators whose respective weight values have been obtained via an expert judgement technique. This paper describes the steps followed to develop this new Operational Safety Index, explains its structure and illustrates its application to process plants

  1. Thermal storage for industrial process and reject heat

    Science.gov (United States)

    Duscha, R. A.; Masica, W. J.

    1978-01-01

    Industrial production uses about 40% of the total energy consumed in the United States. The major share of this is derived from fossil fuel. Potential savings of scarce fuel is possible through the use of thermal energy storage (TES) of reject or process heat for subsequent use. Results of study contracts awarded by the Department of Energy (DOE) and managed by the NASA Lewis Research Center have identified three especially significant industries where high temperature TES appears attractive - paper and pulp, iron and steel, and cement. Potential annual fuel savings with large scale implementation of near-term TES systems for these three industries is nearly 9 million bbl of oil.

  2. Cadmium isotope fractionation of materials derived from various industrial processes.

    Science.gov (United States)

    Martinková, Eva; Chrastný, Vladislav; Francová, Michaela; Šípková, Adéla; Čuřík, Jan; Myška, Oldřich; Mižič, Lukáš

    2016-01-25

    Our study represents ϵ(114/110) Cd NIST3108 values of materials resulting from anthropogenic activities such as coal burning, smelting, refining, metal coating, and the glass industry. Additionally, primary sources (ore samples, pigment, coal) processed in the industrial premises were studied. Two sphalerites, galena, coal and pigment samples exhibited ϵ(114/110) CdNIST3108 values of 1.0±0.2, 0.2±0.2, 1.3±0.1, -2.3±0.2 and -0.1±0.3, respectively. In general, all studied industrial processes were accompanied by Cd isotope fractionation. Most of the industrial materials studied were clearly distinguishable from the samples used as a primary source based on ϵ(114/110) Cd NIST3108 values. The heaviest ϵ(114/110) CdNIST3108 value of 58.6±0.9 was found for slag resulting from coal combustion, and the lightest ϵ(114/110) CdNIST3108 value of -23±2.5 was observed for waste material after Pb refinement. It is evident that ϵ(114/110) Cd NIST3108 values depend on technological processes, and in case of incomplete Cd transfer from source to final waste material, every industrial activity creates differences in Cd isotope composition. Our results show that Cd isotope analysis is a promising tool to track the origins of industrial waste products.

  3. Cadmium isotope fractionation of materials derived from various industrial processes.

    Science.gov (United States)

    Martinková, Eva; Chrastný, Vladislav; Francová, Michaela; Šípková, Adéla; Čuřík, Jan; Myška, Oldřich; Mižič, Lukáš

    2016-01-25

    Our study represents ϵ(114/110) Cd NIST3108 values of materials resulting from anthropogenic activities such as coal burning, smelting, refining, metal coating, and the glass industry. Additionally, primary sources (ore samples, pigment, coal) processed in the industrial premises were studied. Two sphalerites, galena, coal and pigment samples exhibited ϵ(114/110) CdNIST3108 values of 1.0±0.2, 0.2±0.2, 1.3±0.1, -2.3±0.2 and -0.1±0.3, respectively. In general, all studied industrial processes were accompanied by Cd isotope fractionation. Most of the industrial materials studied were clearly distinguishable from the samples used as a primary source based on ϵ(114/110) Cd NIST3108 values. The heaviest ϵ(114/110) CdNIST3108 value of 58.6±0.9 was found for slag resulting from coal combustion, and the lightest ϵ(114/110) CdNIST3108 value of -23±2.5 was observed for waste material after Pb refinement. It is evident that ϵ(114/110) Cd NIST3108 values depend on technological processes, and in case of incomplete Cd transfer from source to final waste material, every industrial activity creates differences in Cd isotope composition. Our results show that Cd isotope analysis is a promising tool to track the origins of industrial waste products. PMID:26452089

  4. Proceedings of national symposium on innovative strategies for cost competitiveness in Indian chemical industry

    International Nuclear Information System (INIS)

    The proceedings are structured in such a manner to cover all the facets of the chemical industry and the cost competitiveness. The topics covered also include membrane technology, nuclear desalination, heavy water production and other topics connected with nuclear industry. Papers relevant to INIS are indexed separately

  5. Web based distance education in chemical industrial plants

    OpenAIRE

    De Giusti, Armando Eduardo; Pessacq, Raúl Adolfo

    2005-01-01

    The development of ICTs (Information and Communication Technologies) and their application in Engineering Education (in a knowledge-centered world) is one of the axes of an ongoing educative transformation. In particular, when the objective is updating professionals and training the industrial plant personnel at the work place, the use of Distance Education tools is of utmost importance. The employment of “Web Based” technologies allows using an expert’s know-how, without requiring his/her pr...

  6. Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

    OpenAIRE

    Nogueira, Verónica Inês Jesus Oliveira

    2014-01-01

    Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction ...

  7. Enhanced Chemical Cleaning: A New Process for Chemically Cleaning Savannah River Waste Tanks

    Energy Technology Data Exchange (ETDEWEB)

    Ketusky, Edward; Spires, Renee; Davis, Neil

    2009-02-11

    At the Savannah River Site (SRS) there are 49 High Level Waste (HLW) tanks that eventually must be emptied, cleaned, and closed. The current method of chemically cleaning SRS HLW tanks, commonly referred to as Bulk Oxalic Acid Cleaning (BOAC), requires about a half million liters (130,000 gallons) of 8 weight percent (wt%) oxalic acid to clean a single tank. During the cleaning, the oxalic acid acts as the solvent to digest sludge solids and insoluble salt solids, such that they can be suspended and pumped out of the tank. Because of the volume and concentration of acid used, a significant quantity of oxalate is added to the HLW process. This added oxalate significantly impacts downstream processing. In addition to the oxalate, the volume of liquid added competes for the limited available tank space. A search, therefore, was initiated for a new cleaning process. Using TRIZ (Teoriya Resheniya Izobretatelskikh Zadatch or roughly translated as the Theory of Inventive Problem Solving), Chemical Oxidation Reduction Decontamination with Ultraviolet Light (CORD-UV{reg_sign}), a mature technology used in the commercial nuclear power industry was identified as an alternate technology. Similar to BOAC, CORD-UV{reg_sign} also uses oxalic acid as the solvent to dissolve the metal (hydr)oxide solids. CORD-UV{reg_sign} is different, however, since it uses photo-oxidation (via peroxide/UV or ozone/UV to form hydroxyl radicals) to decompose the spent oxalate into carbon dioxide and water. Since the oxalate is decomposed and off-gassed, CORD-UV{reg_sign} would not have the negative downstream oxalate process impacts of BOAC. With the oxalate destruction occurring physically outside the HLW tank, re-precipitation and transfer of the solids, as well as regeneration of the cleaning solution can be performed without adding additional solids, or a significant volume of liquid to the process. With a draft of the pre-conceptual Enhanced Chemical Cleaning (ECC) flowsheet, taking full

  8. Capturing connectivity and causality in complex industrial processes

    CERN Document Server

    Yang, Fan; Shah, Sirish L; Chen, Tongwen

    2014-01-01

    This brief reviews concepts of inter-relationship in modern industrial processes, biological and social systems. Specifically ideas of connectivity and causality within and between elements of a complex system are treated; these ideas are of great importance in analysing and influencing mechanisms, structural properties and their dynamic behaviour, especially for fault diagnosis and hazard analysis. Fault detection and isolation for industrial processes being concerned with root causes and fault propagation, the brief shows that, process connectivity and causality information can be captured in two ways: ·      from process knowledge: structural modeling based on first-principles structural models can be merged with adjacency/reachability matrices or topology models obtained from process flow-sheets described in standard formats; and ·      from process data: cross-correlation analysis, Granger causality and its extensions, frequency domain methods, information-theoretical methods, and Bayesian ne...

  9. Molecular modeling finds its place in the industry: examples of research aiming at the development of new materials, processes and chemical products in the field of energy and environment

    International Nuclear Information System (INIS)

    Molecular modeling allows today the simulation of materials and fluids at the nanometer scale, if not at the Angstrom scale. It is based on the most fundamental laws of quantum mechanics and statistical mechanics. In physical chemistry, this field takes advantage of the important advances in computer speed at moderate cost, of improved algorithms, of more accurate parametrizations and of the availability of user friendly software. It answers the need for explaining phenomena and experiments at the microscopic level. It is therefore not surprising that it finds increasing industrial applications. The field of energy and environment is selected here to illustrate this approach with several examples: structure of amorphous surfaces in heterogeneous catalysis, synthesis of new zeolitic structures for adsorption and catalysis, the use of hydrogen for fuels and chemistry, the thermodynamic of oxygenated organic compounds, interfacial properties of supercritical CO2, and the viscosity of fuels. These examples allow to consider the diversity of the available methods and of the contributions of this new domain. (authors)

  10. Solutions for the food processing industry; Shokuhin seizogyo solution

    Energy Technology Data Exchange (ETDEWEB)

    Toda, T.; Iwami, N. [Fuji Electric Co. Ltd., Tokyo (Japan)

    1999-09-10

    To improve quality control and maintain stable operation, the food processing industry requires problem solutions in total, including not only processing and operation control divisions but also quality control, design and production technology, and maintenance divisions. This paper describes solutions for HACCP (hazard analysis critical control point) support, quality control, and maintenance, in order to improve the quality level, ensure traceability and realize stable processing operations. (author)

  11. China’s Coal Chemical Industry: In the View of Governance Challenges

    OpenAIRE

    Xu, Xiaoran; Wang, Dong

    2013-01-01

    This paper examines the China’s coal chemical strategy. As a part of national energy strategy, China’s coal chemical industry induces conflicts on technical level, economic level and policy level. The analysis of this paper is under the policy framework and discusses the causes and effects of these conflicts and also proposes some possible solutions.

  12. Forecasting global developments in the basic chemical industry for environmental policy analysis

    NARCIS (Netherlands)

    Broeren, M.L.M.; Saygin, D.; Patel, M.K.

    2014-01-01

    The chemical sector is the largest industrial energy user, but detailed analysis of its energy use developments lags behind other energy-intensive sectors. A cost-driven forecasting model for basic chemicals production is developed, accounting for regional production costs, demand growth and stock t

  13. Value chain management for commodities: a case study from the chemical industry

    NARCIS (Netherlands)

    Kannegiesser, M.; Günther, H.O.; Beek, van P.; Grunow, M.; Habla, C.

    2009-01-01

    We present a planning model for chemical commodities related to an industry case. Commodities are standard chemicals characterized by sales and supply volatility in volume and value. Increasing and volatile prices of crude oil-dependent raw materials require coordination of sales and supply decision

  14. Producing Bio-Based Bulk Chemicals Using Industrial Biotechnology Saves Energy and Combats Climate Change

    NARCIS (Netherlands)

    Hermann, B.G.; Blok, K.; Patel, M.K.

    2007-01-01

    The production of bulk chemicals from biomass can make a significant contribution to solving two of the most urgent environmental problems: climate change and depletion of fossil energy. We analyzed current and future technology routes leading to 15 bulk chemicals using industrial biotechnology and

  15. Stereodynamics: From elementary processes to macroscopic chemical reactions

    Energy Technology Data Exchange (ETDEWEB)

    Kasai, Toshio [Department of Chemistry, National Taiwan University, Taipei 106, Taiwan (China); Graduate School of Science, Department of Chemistry, Osaka University, Toyonaka, 560-0043 Osaka (Japan); Che, Dock-Chil [Graduate School of Science, Department of Chemistry, Osaka University, Toyonaka, 560-0043 Osaka (Japan); Tsai, Po-Yu [Department of Chemistry, National Taiwan University, Taipei 106, Taiwan (China); Department of Chemistry, National Chung Hsing University, Taichung 402, Taiwan (China); Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei 106, Taiwan (China); Lin, King-Chuen [Department of Chemistry, National Taiwan University, Taipei 106, Taiwan (China); Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei 106, Taiwan (China); Palazzetti, Federico [Scuola Normale Superiore, Pisa (Italy); Dipartimento di Chimica Biologia e Biotecnologie, Università di Perugia, 06123 Perugia (Italy); Aquilanti, Vincenzo [Dipartimento di Chimica Biologia e Biotecnologie, Università di Perugia, 06123 Perugia (Italy); Istituto di Struttura della Materia, Consiglio Nazionale delle Ricerche, Roma (Italy); Instituto de Fisica, Universidade Federal da Bahia, Salvador (Brazil)

    2015-12-31

    This paper aims at discussing new facets on stereodynamical behaviors in chemical reactions, i.e. the effects of molecular orientation and alignment on reactive processes. Further topics on macroscopic processes involving deviations from Arrhenius behavior in the temperature dependence of chemical reactions and chirality effects in collisions are also discussed.

  16. Working capital management in the Swiss chemical industry

    OpenAIRE

    Seeger, S.; Locker, A.; Jergen, C

    2011-01-01

    The performance of Swiss based chemical and pharmaceutical companies regarding their working capital management and its underlying components, namely accounts receivable, inventories and accounts payable differs over time and between the single firms. The calculation of a cash potential for the year 2008 shows that 17 billion CHF is tied up in the companies’ balance sheets if they would realise the Swiss best practice performance. It has also been shown that in rece...

  17. 日化行业偶像品牌塑造流程分析与模型构建--借鉴佰草集品牌的经验%A Process Analysis and Model Construction of Icon Brand Building in Daily Chemical Industry-Learning from the Experience of the Herborist Brand

    Institute of Scientific and Technical Information of China (English)

    娄韬; 方元

    2016-01-01

    International brands of daily chemicals flood into the domestic market,resulting in an unprec-edented fierce competition in daily chemical industry.The brand building process of the Herborist brand by Shanghai Jahwa Company was analyzed as a case of the icon brand building in domestic daily chemical in-dustry.Through establishing an icon brand building model,reasons for the Herborist brand becoming an icon brand were analyzed from identity interpretation,concept orientation,social networks operation,identity strat-egies,etc,which had enriched the existing brand building theories and provided reference for the brand build-ing and disseminating in domestic daily chemical enterprises.%国际日化品牌相继进入国内市场导致国内日化行业市场竞争空前激烈。通过对国内日化偶像品牌塑造的成功案例———上海家化联合股份有限公司旗下品牌佰草集的品牌塑造流程的研究分析,建立偶像品牌塑造模型,从身份演绎、概念定位、社会网络运作、认同策略等方面解释佰草集成为偶像品牌的原因,以丰富现有品牌塑造理论,为国内日化企业偶像品牌的塑造与传播提供借鉴。

  18. Analyzing scheduling in the food-processing industry

    DEFF Research Database (Denmark)

    Akkerman, Renzo; van Donk, Dirk Pieter

    2009-01-01

    Production scheduling has been widely studied in several research areas, resulting in a large number of methods, prescriptions, and approaches. However, the impact on scheduling practice seems relatively low. This is also the case in the food-processing industry, where industry-specific character......Production scheduling has been widely studied in several research areas, resulting in a large number of methods, prescriptions, and approaches. However, the impact on scheduling practice seems relatively low. This is also the case in the food-processing industry, where industry......-specific characteristics induce specific and complex scheduling problems. Based on ideas about decomposition of the scheduling task and the production process, we develop an analysis methodology for scheduling problems in food processing. This combines an analysis of structural (technological) elements of the production...... process with an analysis of the tasks of the scheduler. This helps to understand, describe, and structure scheduling problems in food processing, and forms a basis for improving scheduling and applying methods developed in literature. It also helps in evaluating the organisational structures...

  19. News: Good chemical manufacturing process criteria

    Science.gov (United States)

    This news column covers topics relating to manufacturing criteria, machine to machine technology, novel process windows, green chemistry indices, business resilience, immobilized enzymes, and Bt crops.

  20. Fluid flow for chemical and process engineers

    CERN Document Server

    Holland, F

    1995-01-01

    This major new edition of a popular undergraduate text covers topics of interest to chemical engineers taking courses on fluid flow. These topics include non-Newtonian flow, gas-liquid two-phase flow, pumping and mixing. It expands on the explanations of principles given in the first edition and is more self-contained. Two strong features of the first edition were the extensive derivation of equations and worked examples to illustrate calculation procedures. These have been retained. A new extended introductory chapter has been provided to give the student a thorough basis to understand the methods covered in subsequent chapters.

  1. EVALUATION OF CORROSION COST OF CRUDE OIL PROCESSING INDUSTRY

    Directory of Open Access Journals (Sweden)

    ADESANYA A.O.

    2012-08-01

    Full Text Available Crude oil production industry as the hub of Nigeria Economy is not immune to the global financial meltdown being experienced world over which have resulted in a continual fall of oil price. This has necessitated the need to reduce cost of production. One of the major costs of production is corrosion cost, hence, its evaluation. This research work outlined the basic principles of corrosion prevention, monitoring and inspection and attempted to describe ways in which these measures may be adopted in the context of oil production. A wide range of facilities are used in crude oil production making it difficult to evaluate precisely the extent of corrosion and its cost implication. In this study, cost of corrosion per barrel was determined and the annualized value of corrosion cost was also determined using the principles of engineering economy and results analyzed using descriptive statistics. The results showed that among the corrosion prevention methods identified, the use of chemical treatment gave the highest cost contribution (81% of the total cost of prevention while coating added 19%. Cleaning pigging and cathodic protection gave no cost. The contribution of corrosion maintenance methods are 60% for repairs and 40% for replacement. Also among the corrosion monitoring and inspection identified, NDT gave the highest cost contribution of 41% of the total cost, followed by coating survey (34%. Cathodic protection survey and crude analysis gives the lowest cost contribution of 19% and 6% respectively. Corrosion control cost per barrel was found to be 77 cent/barrel. The significance of this cost was not much due to high price of crude oil in the international market. But the effect of corrosion in crude oil processing takes its toll on crude oil production (i.e. deferment.

  2. Quantitative Exposure Assessment of Various Chemical Substances in a Wafer Fabrication Industry Facility

    OpenAIRE

    Park, Hyunhee; Jang, Jae-Kil; Shin, Jung-Ah

    2011-01-01

    Objectives This study was designed to evaluate exposure levels of various chemicals used in wafer fabrication product lines in the semiconductor industry where work-related leukemia has occurred. Methods The research focused on 9 representative wafer fabrication bays among a total of 25 bays in a semiconductor product line. We monitored the chemical substances categorized as human carcinogens with respect to leukemia as well as harmful chemicals used in the bays and substances with hematologi...

  3. 76 FR 28662 - Industrial, Commercial, and Institutional Boilers and Process Heaters and Commercial and...

    Science.gov (United States)

    2011-05-18

    ... and Process Heaters and Commercial and Industrial Solid Waste Incineration Units AGENCY: Environmental... Major Sources: Industrial, Commercial, and Institutional Boilers and Process Heaters'' and ``Standards...: Industrial, Commercial, and Institutional Boilers and Process Heaters'': Mr. Brian Shrager, Energy...

  4. Industrial process heat case studies. [PROSYS/ECONMAT code

    Energy Technology Data Exchange (ETDEWEB)

    Hooker, D.W.; May, E.K.; West, R.E.

    1980-05-01

    Commercially available solar collectors have the potential to provide a large fraction of the energy consumed for industrial process heat (IPH). Detailed case studies of individual industrial plants are required in order to make an accurate assessment of the technical and economic feasibility of applications. This report documents the results of seven such case studies. The objectives of the case study program are to determine the near-term feasibility of solar IPH in selected industries, identify energy conservation measures, identify conditions of IPH systems that affect solar applications, test SERI's IPH analysis software (PROSYS/ECONOMAT), disseminate information to the industrial community, and provide inputs to the SERI research program. The detailed results from the case studies are presented. Although few near-term, economical solar applications were found, the conditions that would enhance the opportunities for solar IPH applications are identified.

  5. Fossils as Key Resources of Hydrocarbons for the Chemical Industry - The Burning Problem of Industrial Development

    OpenAIRE

    Kopytowski, J.A.; Wojtania, J.; Zebrowski, M.

    1981-01-01

    Intensive research is being pursued world-wide to establish a methodology for industrial development. Many types of changes play an important role in the dynamics of the industrial structure in both large and small economies. The global energy supply and future substitution of crude oil are among the most important and widely investigated constraints. With the existing patterns of production and development strongly determined by the specific conditions in a given region, the development of v...

  6. Cogeneration technology alternatives study. Volume 2: Industrial process characteristics

    Science.gov (United States)

    1980-01-01

    Information and data for 26 industrial processes are presented. The following information is given for each process: (1) a description of the process including the annual energy consumption and product production and plant capacity; (2) the energy requirements of the process for each unit of production and the detailed data concerning electrical energy requirements and also hot water, steam, and direct fired thermal requirements; (3) anticipated trends affecting energy requirements with new process or production technologies; and (4) representative plant data including capacity and projected requirements through the year 2000.

  7. Chemical Sensing for Buried Landmines - Fundamental Processes Influencing Trace Chemical Detection

    Energy Technology Data Exchange (ETDEWEB)

    PHELAN, JAMES M.

    2002-05-01

    Mine detection dogs have a demonstrated capability to locate hidden objects by trace chemical detection. Because of this capability, demining activities frequently employ mine detection dogs to locate individual buried landmines or for area reduction. The conditions appropriate for use of mine detection dogs are only beginning to emerge through diligent research that combines dog selection/training, the environmental conditions that impact landmine signature chemical vapors, and vapor sensing performance capability and reliability. This report seeks to address the fundamental soil-chemical interactions, driven by local weather history, that influence the availability of chemical for trace chemical detection. The processes evaluated include: landmine chemical emissions to the soil, chemical distribution in soils, chemical degradation in soils, and weather and chemical transport in soils. Simulation modeling is presented as a method to evaluate the complex interdependencies among these various processes and to establish conditions appropriate for trace chemical detection. Results from chemical analyses on soil samples obtained adjacent to landmines are presented and demonstrate the ultra-trace nature of these residues. Lastly, initial measurements of the vapor sensing performance of mine detection dogs demonstrates the extreme sensitivity of dogs in sensing landmine signature chemicals; however, reliability at these ultra-trace vapor concentrations still needs to be determined. Through this compilation, additional work is suggested that will fill in data gaps to improve the utility of trace chemical detection.

  8. Environmental technology applications: fact file on toxic contaminants in industrial waste process streams

    Energy Technology Data Exchange (ETDEWEB)

    Newkirk, H.W.

    1977-05-11

    This report is a compendium of facts related to chemical materials present in industrial waste process streams which have already been declared or are being evaluated as hazardous under the Toxic Substances Control Act. Since some 400 chemicals are presently covered by consensus standards, the substances reviewed are only those considered to be a major threat to public health and welfare by Federal and State regulatory agencies. For each hazardous material cited, the facts relate, where possible, to an identification of the stationary industrial sources, the kind of waste stream impacted, proposed regulations and established effluent standards, the volume of emissions produced each year, the volume of emissions per unit of industrial product produced, present clean-up capabilities, limitations, and costs. These data should be helpful in providing information for the assessment of potential problems, should be of use to the manufacturers of pollution control equipment or of chemicals for pollution control, should be of use to the operators or potential operators of processes which produce pollutants, and should help to define industry-wide emission practices and magnitudes.

  9. Optical sensors for process control and emissions monitoring in industry

    Energy Technology Data Exchange (ETDEWEB)

    S. W. Alendorf; D. K. Ottensen; D. W. Hahn; T. J. Kulp; U. B. Goers

    1999-01-01

    Sandia National Laboratories has a number of ongoing projects developing optical sensors for industrial environments. Laser-based sensors can be attractive for relatively harsh environments where extractive sampling is difficult, inaccurate, or impractical. Tools developed primarily for laboratory research can often be adapted for the real world and applied to problems far from their original uses. Spectroscopic techniques, appropriately selected, have the potential to impact the bottom line of a number of industries and industrial processes. In this paper the authors discuss three such applications: a laser-based instrument for process control in steelmaking, a laser-induced breakdown method for hazardous metal detection in process streams, and a laser-based imaging sensor for evaluating surface cleanliness. Each has the potential to provide critical, process-related information in a real-time, continuous manner. These sensor techniques encompass process control applications and emissions monitoring for pollution prevention. They also span the range from a field-tested pre-commercial prototype to laboratory instrumentation. Finally, these sensors employ a wide range of sophistication in both the laser source and associated analytical spectroscopy. In the ultimate applications, however, many attributes of the sensors are in common, such as the need for robust operation and hardening for harsh industrial environments.

  10. Sodium waste management: from process development to industrial application

    International Nuclear Information System (INIS)

    Operation and decommissioning of Liquid Metal Fast Reactors (LMFRs) generate various kinds of sodium wastes. Simple methods dealing with such wastes exist and are currently used in the classical industry or for the dismantling of non-radioactive test loops. However radioactivity implies accurate control of the liquid and gaseous effluents generated, which implies more sophisticated methods and design features. Moreover, high sodium reactivity implies the development of safe processes with simple technology. In support to the needs of the LMFRs in operation, and in preparation to the LMFR decommissioning, the CEA has developed particular skills and specific processes with respect to sodium waste management. On its side, FRAMATOME Direction NOVATOME has applied its LMFR and sodium engineering knowledge to the industrialization of such processes. This paper describes the results obtained so far on the development of processes, together with examples or prospects of application in industrial conditions based on the wide diversity of wastes produced by a LMFR. This review shows that, if the contaminated sodium waste treatment requires the greatest care and well-adapted processes, the techniques exist or are being developed, with already satisfactory industrial application records. (authors)

  11. Development of A Flexible System for the Simultaneous Conversion of Biomass to Industrial Chemicals and the Production of Industrial Biocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Johnway; Hooker, Brian S.; Skeen, R S.; Anderson, D B.; Lankey, R. L.; Anastas, P. T.

    2002-01-01

    A flexible system was developed for the simultaneous conversion of biomass to industrial chemicals and the production of industrial biocatalysts. In particular, the expression of a bacterial enzyme, beta-glucuronidase (GUS), was investigated using a genetically modified starch-degrading Saccharomyces strain in suspension cultures in starch media. Different sources of starch including corn and waste potato starch were used for yeast biomass accumulation and GUS expression studies under controls of inducible and constitutive promoters. A thermostable bacterial cellulase, Acidothermus cellulolyticus E1 endoglucanase gene was also cloned into an episomal plasmid expression vector and expressed in the starch-degrading Saccharomyces strain.

  12. High-temperature industrial process heat: technology assessment and introduction rationale

    Energy Technology Data Exchange (ETDEWEB)

    1978-03-03

    Three specific topics of interest to DOE are addressed: to establish the significance and identify the role of high-temperature process heat in the nation's energy economy; to identify the role of solar thermal power in these high-temperature industrial applications in terms of possible markets and economic potential; and to recommend programmatic approaches for these solar thermal high-temperature process heat activities, including proposed content for initial Request for Proposals (RFPs) to accomplish such activities. The scope of the work required to accomplish these three purposes included the following: review of US industrial energy requirements, survey of current DOE low-temperature Agricultural and Industrial Process Heat Program, examination of high-temperature solar thermal electric systems already developed or under development by DOE and industry, and coordination with the high-energy user segments of industry (i.e., cement, chemical and petroleum) to find additional markets for some or all of the systems or components being developed in the DOE solar thermal electric program. Statistical data are presented identifying energy allocations to process heat and defining DOE's involvement. Three current fossil fuel process heat system examples are provided and the corresponding solar potential is identified.

  13. Research, climate, energy : Questions of destiny for the chemical industry

    Energy Technology Data Exchange (ETDEWEB)

    Kastinen, A., email: aimo.kastinen@chemind.fi

    2010-07-01

    Registration for the first phase of Reach finishes at the end of November. Then we will see whether the standard of legislation has been set correctly in respect of the EU's operational ability. If it isn't, significant problems will result for the community's treatment of materials and the EU's competitiveness, and Reach's value as a global model will become questionable. Also, the CLP regulation concerning classification, labelling and packaging of chemicals will start to come into effect as from the beginning of December. In the first phase, the question is one of classification of substances, and gradually the requirements will be applied to mixtures too. At the same time, Safety Data Sheets shall be renewed in accordance with their own transition period. The current product legislation concerning chemicals shall be fully revised by the mid-point of the decade, but before then company safety officers will have to do lots of work to change the previous routines

  14. Survey on alternative energy for industrial processes in Indonesia

    International Nuclear Information System (INIS)

    In consequence of the national industrial development, it is necessary to supply a lot of energy. This paper presented a discussion about the option of supplying nuclear processed heat as alternative energy sources for industry especially in Java island. The electrical energy requirement can be estimated rising. The stock and the requirement of energy in Indonesia is unbalance. If the oil production rate is constant, such as that of today, it can be estimated that the oil stock would be over in 20 years. The country is trying to difertify its source of energy and reduce its dependence on oil. High Temperature Reactor (HTR) produces electric and also heat at various temperature in the form of steam and gas. Heat processes from a high temperature reactor, could be used in industry for supplying heat for coal hidroforming, gasification of coal, metal annealing, petrochemical hydrogenation, distillation, purification of petrochemicals, evaporation, water heat, etc. (author). 8 refs, 1 fig., 5 tabs

  15. Alternative routes for the chemical industry regarding US shale gas

    Energy Technology Data Exchange (ETDEWEB)

    Kneissel, B. [Stratley AG, Koeln (Germany)

    2013-11-01

    Cracking ethane from wet shale gas in North America sets a bench mark to global ethylene production costs. Regarding very attractive ethane prices from extraction of low cost wet shale gas we suggest in North America ethylene production costs will roughly vary between 400 and 600 $/ t. As in other parts of the world, except Middle East, the availability of ethane seems to be more limited other sources for ethylene, such as methane, coal and biomass are investigated. Oxidative coupling of methane (OCM) has its limits and may only lead to competitive production costs for large scale operations. Coal converted to ethylene via calcium carbide and subsequent hydrogenation may hardly be a viable answer. Ethylene derived by dehydration of ethanol from fermentation of corn sugar may be an answer for very low crop prices. Further research on the conversion of methane with emphasis on its industrial implementation as a major carbon resource is recommended. (orig.)

  16. BEHAVIOR OF MERCURY DURING DWPF CHEMICAL PROCESS CELL PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    Zamecnik, J.; Koopman, D.

    2012-04-09

    The Defense Waste Processing Facility has experienced significant issues with the stripping and recovery of mercury in the Chemical Processing Cell (CPC). The stripping rate has been inconsistent, often resulting in extended processing times to remove mercury to the required endpoint concentration. The recovery of mercury in the Mercury Water Wash Tank has never been high, and has decreased significantly since the Mercury Water Wash Tank was replaced after the seventh batch of Sludge Batch 5. Since this time, essentially no recovery of mercury has been seen. Pertinent literature was reviewed, previous lab-scale data on mercury stripping and recovery was examined, and new lab-scale CPC Sludge Receipt and Adjustment Tank (SRAT) runs were conducted. For previous lab-scale data, many of the runs with sufficient mercury recovery data were examined to determine what factors affect the stripping and recovery of mercury and to improve closure of the mercury material balance. Ten new lab-scale SRAT runs (HG runs) were performed to examine the effects of acid stoichiometry, sludge solids concentration, antifoam concentration, form of mercury added to simulant, presence of a SRAT heel, operation of the SRAT condenser at higher than prototypic temperature, varying noble metals from none to very high concentrations, and higher agitation rate. Data from simulant runs from SB6, SB7a, glycolic/formic, and the HG tests showed that a significant amount of Hg metal was found on the vessel bottom at the end of tests. Material balance closure improved from 12-71% to 48-93% when this segregated Hg was considered. The amount of Hg segregated as elemental Hg on the vessel bottom was 4-77% of the amount added. The highest recovery of mercury in the offgas system generally correlated with the highest retention of Hg in the slurry. Low retention in the slurry (high segregation on the vessel bottom) resulted in low recovery in the offgas system. High agitation rates appear to result in lower

  17. BEHAVIOR OF MERCURY DURING DWPF CHEMICAL PROCESS CELL PROCESSING

    Energy Technology Data Exchange (ETDEWEB)

    Zamecnik, J.; Koopman, D.

    2012-04-09

    The Defense Waste Processing Facility has experienced significant issues with the stripping and recovery of mercury in the Chemical Processing Cell (CPC). The stripping rate has been inconsistent, often resulting in extended processing times to remove mercury to the required endpoint concentration. The recovery of mercury in the Mercury Water Wash Tank has never been high, and has decreased significantly since the Mercury Water Wash Tank was replaced after the seventh batch of Sludge Batch 5. Since this time, essentially no recovery of mercury has been seen. Pertinent literature was reviewed, previous lab-scale data on mercury stripping and recovery was examined, and new lab-scale CPC Sludge Receipt and Adjustment Tank (SRAT) runs were conducted. For previous lab-scale data, many of the runs with sufficient mercury recovery data were examined to determine what factors affect the stripping and recovery of mercury and to improve closure of the mercury material balance. Ten new lab-scale SRAT runs (HG runs) were performed to examine the effects of acid stoichiometry, sludge solids concentration, antifoam concentration, form of mercury added to simulant, presence of a SRAT heel, operation of the SRAT condenser at higher than prototypic temperature, varying noble metals from none to very high concentrations, and higher agitation rate. Data from simulant runs from SB6, SB7a, glycolic/formic, and the HG tests showed that a significant amount of Hg metal was found on the vessel bottom at the end of tests. Material balance closure improved from 12-71% to 48-93% when this segregated Hg was considered. The amount of Hg segregated as elemental Hg on the vessel bottom was 4-77% of the amount added. The highest recovery of mercury in the offgas system generally correlated with the highest retention of Hg in the slurry. Low retention in the slurry (high segregation on the vessel bottom) resulted in low recovery in the offgas system. High agitation rates appear to result in lower

  18. Microbial production of bulk chemicals: development of anaerobic processes

    NARCIS (Netherlands)

    Weusthuis, R.A.; Lamot, I.; Oost, van der J.; Sanders, J.P.M.

    2011-01-01

    nnovative fermentation processes are necessary for the cost-effective production of bulk chemicals from renewable resources. Current microbial processes are either anaerobic processes, with high yield and productivity, or less-efficient aerobic processes. Oxygen utilization plays an important role i

  19. Chifeng Strives to Build China’s Nonferrous Metals Industrial Processing Base

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>As the largest pillar industry of Chifeng industrial economy, metallurgical industry offers half of industrial added value and approximately 60% of fiscal revenue of the city. In recent years, Chifeng continues to extend industrial chain and enhance industrial level by relying on nonferrous metals resources, striving to build the nonferrous metals industrial processing base of China.

  20. Proceedings of the 3. International conference on waste management in the chemical and petrochemical industries. Volume 1 and 2.

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Francisco F.; Pereira Filho, Francisco A.; Almeida, Sergio A.S. [eds.

    1993-12-31

    To produce without pollution is today a mandate for the preservation of our society. To produce cleaner means to conserve energy and natural resources, to reduce the use of toxic substances, to invest in the evolution of products and production processes towards a minimum of residues. The Third International Conference on Waste Minimization in the Chemical and Petrochemical Industries addresses these challenging questions regarding waste minimization

  1. Microbiological and Chemical Quality of Water in Food Industries with Low Content of Water at End Products

    OpenAIRE

    Sh Nazmara; A Ostadrahimi; H Taghipour; M Mosaferi

    2009-01-01

    "n "nBackground and Objectives: In the production of some high-consumed food products like cake, biscuit, chocolate and spaghetti water is used in the preparing of primary material and in the kneading processes. At the present study microbiological and chemical quality of consumed water in food industries of East Azerbaijan Province were studied."nMaterials and Methods: Eleven factories with different products were selected. Water samples were collected and analyzed regarding the microbiologi...

  2. Activities of the Institute of Chemical Processing of Coal at Zabrze

    Energy Technology Data Exchange (ETDEWEB)

    Dreszer, K.

    1995-12-31

    The Institute of Chemical Processing of Coal at Zabrze was established in 1955. The works on carbochemical technologies have been, therefore, carried out at the Institute for 40 years. The targets of the Institute`s activities are research, scientific and developing works regarding a sensible utilization of fuels via their processing into more refined forms, safe environment, highly efficient use of energy carriers and technological products of special quality. The Institute of Chemical Processing of Coal has been dealing with the following: optimized use of home hard coals; improvement of classic coal coking technologies, processing and utilization of volatile coking products; production technologies of low emission rate fuels for communal management; analyses of coal processing technologies; new technologies aimed at increasing the efficiency of coal utilization for energy-generating purposes, especially in industry and studies on the ecological aspects of these processes; production technologies of sorbents and carbon activating agents and technologies of the utilization; rationalization of water and wastes management in the metallurgical and chemical industries in connection with removal of pollution especially dangerous to the environment from wastes; utilization technologies of refined materials (electrode cokes, binders, impregnating agents) for making electrodes, refractories and new generation construction carbon materials; production technologies of high quality bituminous and bituminous and resin coating, anti-corrosive and insulation materials; environmentally friendly utilization technologies for power station, mine and other wastes, and dedusting processes in industrial gas streams.

  3. Airborne contamination of forest soils by carbonaceous particles from industrial coal processing

    OpenAIRE

    Schmidt, M. W. I.; Knicker, Heike; Hatcher, Patrick G.; Kögel-Knabner, I.

    2000-01-01

    In the German Ruhr-area industrial coal processing emitted large amounts of carbonaceous particles for a century until 1970. Our objectives were to detect the presence of airborne carbonaceous particles and assess their impact on the chemical structure of soil organic matter in two forest soils (Podzols) with potential sources of carbonaceous particles approximately 10 to 30 km away. Contamination was not visible macroscopicaily. Organic matter was characterized in bulk soils and in particle-...

  4. Practical Use of Operation Data in the Process Industry

    Science.gov (United States)

    Kano, Manabu

    This paper aims to reveal real problems in the process industry and introduce recent development to solve such problems from the viewpoint of effective use of operation data. Two topics are discussed: virtual sensor and process control. First, in order to clarify the present state and problems, a part of our recent questionnaire survey of process control is quoted. It is emphasized that maintenance is a key issue not only for soft-sensors but also for controllers. Then, new techniques are explained. The first one is correlation-based just-in-time modeling (CoJIT), which can realize higher prediction performance than conventional methods and simplify model maintenance. The second is extended fictitious reference iterative tuning (E-FRIT), which can realize data-driven PID control parameter tuning without process modeling. The great usefulness of these techniques are demonstrated through their industrial applications.

  5. Pressurized Recuperator For Heat Recovery In Industrial High Temperature Processes

    Directory of Open Access Journals (Sweden)

    Gil S.

    2015-09-01

    Full Text Available Recuperators and regenerators are important devices for heat recovery systems in technological lines of industrial processes and should have high air preheating temperature, low flow resistance and a long service life. The use of heat recovery systems is particularly important in high-temperature industrial processes (especially in metallurgy where large amounts of thermal energy are lost to the environment. The article presents the process design for a high efficiency recuperator intended to work at high operating parameters: air pressure up to 1.2 MPa and temperature of heating up to 900°C. The results of thermal and gas-dynamic calculations were based on an algorithm developed for determination of the recuperation process parameters. The proposed technical solution of the recuperator and determined recuperation parameters ensure its operation under maximum temperature conditions.

  6. Development of sustainable paper coatings using nanoscale industrial surface processing

    DEFF Research Database (Denmark)

    Markert, Frank; Breedveld, Leo; Lahti, Johanna;

    The term “sustainable production” comprises a weighting of economical, environmental and social considerations. The three categories are mutually dependent and therefore an assessment needs to take a systems analysis approach to make the right decisions by the various stakeholders ranging from...... developers, production industries, consumers and authorities. Part of the consideration is the public perception of the new product and the processes to manufacture it, which is an important aspect for products being developed using nanoscale surface processing. Such considerations are integrated...... to inform the public about the processes and benefits of the prototype products, and partly to give feedback to the project partners on the environmental and safety aspects of the different material, processing, use and waste stages. By that being a link between the industrial project partners developing...

  7. Energy conservation and cost benefits in the dairy processing industry

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-01

    Guidance is given on measuring energy consumption in the plant and pinpointing areas where energy-conservation activities can return the most favorable economics. General energy-conservation techniques applicable to most or all segments of the dairy processing industry, including the fluid milk segment, are emphasized. These general techniques include waste heat recovery, improvements in electric motor efficiency, added insulation, refrigeration improvements, upgrading of evaporators, and increases in boiler efficiency. Specific examples are given in which these techniques are applied to dairy processing plants. The potential for energy savings by cogeneration of process steam and electricity in the dairy industry is also discussed. Process changes primarily applicable to specific milk products which have resulted in significant energy cost savings at some facilities or which promise significant contributions in the future are examined. A summary checklist of plant housekeeping measures for energy conservation and guidelines for economic evaluation of conservation alternatives are provided. (MHR)

  8. Computer simulation program is adaptable to industrial processes

    Science.gov (United States)

    Schultz, F. E.

    1966-01-01

    The Reaction kinetics ablation program /REKAP/, developed to simulate ablation of various materials, provides mathematical formulations for computer programs which can simulate certain industrial processes. The programs are based on the use of nonsymmetrical difference equations that are employed to solve complex partial differential equation systems.

  9. Advantages of Laser Polarimetry Applied to Tequila Industrial Process Control

    Science.gov (United States)

    Fajer, V.; Rodriguez, C.; Flores, R.; Naranjo, S.; Cossio, G.; Lopez, J.

    2002-03-01

    The development of a polarimetric method for crude and cooked agave juice quality control not only by direct polarimetric measurement also by means of laser polarimeter LASERPOL 101M used as a liquid chromatographic detector is presented. The viability and advantage of this method for raw material quality control and during Tequila industrial process is shown.

  10. Intermediate product selection and blending in the food processing industry

    DEFF Research Database (Denmark)

    Kilic, Onur A.; Akkerman, Renzo; van Donk, Dirk Pieter;

    2013-01-01

    This study addresses a capacitated intermediate product selection and blending problem typical for two-stage production systems in the food processing industry. The problem involves the selection of a set of intermediates and end-product recipes characterising how those selected intermediates...

  11. Mini-channel heat exchangers for industrial distillation processes

    NARCIS (Netherlands)

    Van de Bor, D.M.

    2014-01-01

    In this thesis the technical and economic performance of compression-resorption heat pumps has been investigated. The main objective of this thesis was to improve the performance and reduce the investment costs of compression-resorption heat pumps applied in process industry. A model that is able to

  12. How to secure sustainable competitiveness of Chemical Industry Parks:global competitive challenges and a systematic, customer-centric response

    OpenAIRE

    Behrendt, C

    2013-01-01

    The central question of the following paper is how Chemical Industry Park operators could systematically integrate the external investors' perspective into their decisions about the park's future competitive positioning and continuous improvement of operational excellence. In today's chemical industry landscape, Chemical Industry Parks and their operators face great challenges. On the one hand, they have to meet increased and more complex demands of globally-active chemical companies. On the ...

  13. Sustainable catalysis challenges and practices for the pharmaceutical and fine chemical industries

    CERN Document Server

    Dunn, Peter J; Krische, Michael J; Williams, Michael T

    2013-01-01

    Opens the door to the sustainable production of pharmaceuticals and fine chemicals Driven by both public demand and government regulations, pharmaceutical and fine chemical manufacturers are increasingly seeking to replace stoichiometric reagents used in synthetic transformations with catalytic routes in order to develop greener, safer, and more cost-effective chemical processes. This book supports the discovery, development, and implementation of new catalytic methodologies on a process scale, opening the door to the sustainable production of pharmaceuticals and fine chemicals

  14. Opportunities and Challenges Confronting China’s Copper Processing Industry

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Against the macro background of gradually recovering global economy,China’s copper processing industry is facing good opportunities:External environment continues to optimize,key enterprises show improvement in profit earning condition.In 2013 the output of copper processing products was 14.987 million tonnes,up by25.20%on Y-o-Y basis.In 2014,the output of

  15. Application of electrical capacitance tomography for imaging industrial processes

    Institute of Scientific and Technical Information of China (English)

    DYAKOWSKI Tom

    2005-01-01

    Electrical tomography is, in certain cases, the most attractive method for real imaging of industrial processes, because of its inherent simplicity, rugged cons truction of the tomographer and high-speed capability. This paper presents examples illustrating applications of electrical tomography for imaging fluidized beds, bubble columns and pneumatic conveyors. Electrical tomography opens up new ways for processing, imaging and modelling multi-phase flows as shown by 2D and 3D images illustrating the various types of flow morphology.

  16. Market development directory for solar industrial process heat systems

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-02-01

    The purpose of this directory is to provide a basis for market development activities through a location listing of key trade associations, trade periodicals, and key firms for three target groups. Potential industrial users and potential IPH system designers were identified as the prime targets for market development activities. The bulk of the directory is a listing of these two groups. The third group, solar IPH equipment manufacturers, was included to provide an information source for potential industrial users and potential IPH system designers. Trade associates and their publications are listed for selected four-digit Standard Industrial Code (SIC) industries. Since industries requiring relatively lower temperature process heat probably will comprise most of the near-term market for solar IPH systems, the 80 SIC's included in this chapter have process temperature requirements less than 350/sup 0/F. Some key statistics and a location list of the largest plants (according to number of employees) in each state are included for 15 of the 80 SIC's. Architectural/engineering and consulting firms are listed which are known to have solar experience. Professional associated and periodicals to which information on solar IPH sytstems may be directed also are included. Solar equipment manufacturers and their associations are listed. The listing is based on the SERI Solar Energy Information Data Base (SEIDB).

  17. Progress of environmental management and risk assessment of industrial chemicals in China

    International Nuclear Information System (INIS)

    With China’s rapid economic growth, chemical-related environmental issues have become increasingly prominent, and the environmental management of chemicals has garnered increased attention from the government. This review focuses on the current situation and the application of risk assessment in China’s environmental management of industrial chemicals. The related challenges and research needs of the country are also discussed. The Chinese government promulgated regulations for the import and export of toxic chemicals in 1994. Regulations for new chemical substances came into force in 2003, and were revised in 2010 based on the concept of risk management. In order to support the implementation of new regulations, Guidance for Risk Assessment of Chemicals is under development in an attempt to provide the concepts and techniques of risk assessment. With increasing concern and financial support from Chinese government, China is embarking on the fast track of research and development in environmental management of industrial chemicals. - This paper reviews the current situation of industrial chemical management in China, and discusses the application of risk assessment and further research needs in this field.

  18. Business process of reputation management of food industry enterprises

    Directory of Open Access Journals (Sweden)

    Derevianko Olena. H.

    2014-01-01

    Full Text Available The goal of the article is development of the methodical base of reputation management directed at formalisation of theoretical provisions and explanation how to organise reputation management at food industry enterprises. The article shows prospectiveness of use of the Business Process Management concept in reputation management. Using the diagram of the Reputation Management business process environment the article shows its key participants (suppliers and clients of the business process and identifies their place in formation of the enterprise reputation. It also shows that the reputation management should be considered a business process of the highest level of management. Construction of the flow structure of the Reputation Management business process allows uncovering the logic of interrelation of inlets and outlets within the framework of the specified main stages of the business process: assessment of the current state of reputation, collection of information about stakeholders, identification of PR strategy goals, planning of necessary resources, realisation of the PR strategy, assessment of efficiency and process monitoring. The article offers the flow, functional and organisational structures of the Reputation Management business process for food industry enterprises. Moreover, justification of functional and organisational structures of the Reputation Management business process gives a possibility to distribute functions of reputation management between specific executors and establish responsibility for each stage of the business process.

  19. Predicting the future: opportunities and challenges for the chemical industry to apply 21st-century toxicity testing.

    Science.gov (United States)

    Settivari, Raja S; Ball, Nicholas; Murphy, Lynea; Rasoulpour, Reza; Boverhof, Darrell R; Carney, Edward W

    2015-03-01

    Interest in applying 21st-century toxicity testing tools for safety assessment of industrial chemicals is growing. Whereas conventional toxicology uses mainly animal-based, descriptive methods, a paradigm shift is emerging in which computational approaches, systems biology, high-throughput in vitro toxicity assays, and high-throughput exposure assessments are beginning to be applied to mechanism-based risk assessments in a time- and resource-efficient fashion. Here we describe recent advances in predictive safety assessment, with a focus on their strategic application to meet the changing demands of the chemical industry and its stakeholders. The opportunities to apply these new approaches is extensive and include screening of new chemicals, informing the design of safer and more sustainable chemical alternatives, filling information gaps on data-poor chemicals already in commerce, strengthening read-across methodology for categories of chemicals sharing similar modes of action, and optimizing the design of reduced-risk product formulations. Finally, we discuss how these predictive approaches dovetail with in vivo integrated testing strategies within repeated-dose regulatory toxicity studies, which are in line with 3Rs principles to refine, reduce, and replace animal testing. Strategic application of these tools is the foundation for informed and efficient safety assessment testing strategies that can be applied at all stages of the product-development process.

  20. Federal agencies active in chemical industry-related research and development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-29

    The Energy Policy Act of 1992 calls for a program to further the commercialization of renewable energy and energy efficient technologies for the industrial sector.. The primary objective of the Office of Industrial Technologies Chemical Industry Team is to work in partnership with the US chemical industry to maximize economic, energy, and environmental benefits through research and development of innovative technologies. This document was developed to inventory organizations within the federal government on current chemical industry-related research and development. While an amount of funding or number of projects specifically relating to chemical industry research and development was not defined in all organizations, identified were about 60 distinct organizations representing 7 cabinet-level departments and 4 independent agencies, with research efforts exceeding $3.5 billion in fiscal year 1995. Effort were found to range from less than $500 thousand per year at the Departments of Agriculture and the Interior to over $100 million per year at the Departments of Commerce, Defense, Energy, and Health and Human Services and the National Aeronautics and Space Administration. The total number of projects in these programs exceeded 10,000. This document is complete to the extent that agencies volunteered information. Additions, corrections, and changes are encouraged and will be incorporated in future revisions.

  1. A model for reliability analysis and calculation applied in an example from chemical industry

    Directory of Open Access Journals (Sweden)

    Pejović Branko B.

    2010-01-01

    Full Text Available The subject of the paper is reliability design in polymerization processes that occur in reactors of a chemical industry. The designed model is used to determine the characteristics and indicators of reliability, which enabled the determination of basic factors that result in a poor development of a process. This would reduce the anticipated losses through the ability to control them, as well as enabling the improvement of the quality of production, which is the major goal of the paper. The reliability analysis and calculation uses the deductive method based on designing of a scheme for fault tree analysis of a system based on inductive conclusions. It involves the use standard logical symbols and rules of Boolean algebra and mathematical logic. The paper eventually gives the results of the work in the form of quantitative and qualitative reliability analysis of the observed process, which served to obtain complete information on the probability of top event in the process, as well as objective decision making and alternative solutions.

  2. Lignin as a renewable aromatic resource for the chemical industry

    NARCIS (Netherlands)

    Gosselink, R.J.A.

    2011-01-01

    Valorization of lignin plays a key role in the further development of lignocellulosic biorefinery processes for biofuels and biobased materials production. Today’s increased demand for alternatives to fossil carbon-based products expands the interest and the need to create added value to the u

  3. Survey on the Use of LCA in European Chemical Industry

    DEFF Research Database (Denmark)

    Olsen, Stig Irving

    1999-01-01

    's has been undertaken to comply with customers' requirements for LCA data, but also process development and marketing were important purposes of the work. Interestingly, in about 40% of the companies the LCA's actually revealed results that would not have been anticipated without doing the LCA...

  4. Catalytic arylation methods from the academic lab to industrial processes

    CERN Document Server

    Burke, Anthony J

    2014-01-01

    A current view of the challenging field of catalytic arylation reactions. Clearly structured, the chapters in this one-stop resource are arranged according to the reaction type, and focus on novel, efficient and sustainable processes, rather than the well-known and established cross-coupling methods.The entire contents are written by two authors with academic and industrial expertise to ensure consistent coverage of the latest developments in the field, as well as industrial applications, such as C-H activation, iron and gold-catalyzed coupling reactions, cycloadditions or novel methodologies

  5. Operation and design of selected industrial process heat field tests

    Energy Technology Data Exchange (ETDEWEB)

    Kearney, D. W.

    1981-02-01

    The DOE program of solar industrial process heat field tests has shown solar energy to be compatible with numerous industrial needs. Both the operational projects and the detailed designs of systems that are not yet operational have resulted in valuable insights into design and hardware practice. Typical of these insights are the experiences discussed for the four projects reviewed. Future solar IPH systems should benefit greatly not only from the availability of present information, but also from the wealth of operating experience from projects due to start up in 1981.

  6. Industrial and agricultural process heat information user study

    Energy Technology Data Exchange (ETDEWEB)

    Belew, W.W.; Wood, B.L.; Marle, T.L.; Reinhardt, C.L.

    1981-03-01

    The results of a series of telephone interviews with groups of users of information on solar industrial and agricultural process heat (IAPH) are described. These results, part of a larger study on many different solar technologies, identify types of information each group needed and the best ways to get information to each group. In the current study only high-priority groups were examined. Results from 10 IAPH groups of respondents are analyzed in this report: IPH Researchers; APH Researchers; Representatives of Manufacturers of Concentrating and Nonconcentrating Collectors; Plant, Industrial, and Agricultural Engineers; Educators; Representatives of State Agricultural Offices; and County Extension Agents.

  7. Property Modelling for Applications in Chemical Product and Process Design

    DEFF Research Database (Denmark)

    Gani, Rafiqul

    is missing, the atom connectivity based model is employed to predict the missing group interaction. In this way, a wide application range of the property modeling tool is ensured. Based on the property models, targeted computer-aided techniques have been developed for design and analysis of organic chemicals......, polymers, mixtures as well as separation processes. The presentation will highlight the framework (ICAS software) for property modeling, the property models and issues such as prediction accuracy, flexibility, maintenance and updating of the database. Also, application issues related to the use of property......Physical-chemical properties of pure chemicals and their mixtures play an important role in the design of chemicals based products and the processes that manufacture them. Although, the use of experimental data in design and analysis of chemicals based products and their processes is desirable...

  8. Ergonomics and simulation tools for service & industrial process improvement

    Science.gov (United States)

    Sánchez, A.; García, M.

    2012-04-01

    Human interaction within designed processes is a really important factor in how efficiently any process will operate. How a human will function in relation to a process is not easy to predict. All the ergonomic considerations traditionally have been evaluated outside of the 3D product design. Nowadays technologies of 3D process design and simulation tools give us this opportunity from the earliest stages of the design process. Also they can be used to improve current process in order to increase human comfort, productivity and safety. This work shows a methodology using 3D design and simulation tools to improve industrial and service process. This methodology has as an objective the detection, evaluation, control of work-related musculoskeletal disorders (WMSDs).

  9. INDUSTRIAL PROCESS VALIDATION OF TABLET DOSAGE FORM: AN OVERVIEW

    Directory of Open Access Journals (Sweden)

    Gupta Surbhi

    2012-03-01

    Full Text Available In pharmaceutical organizations, validation is a fundamental segment that supports a company commitment to quality assurance. Validation is a tool of quality assurance which provides confirmation of the quality in equipment systems, manufacturing processes, software and testing methods. Validation assures that products with pre-determined quality characteristics and attributes can be reproduced consistently/reproducibly within the established limits of the manufacturing process operation at the manufacturing site. Validation of the individual steps of the manufacturing processes is called the process validation. Different dosage forms have different validation protocols. Here this article concentrates on the process validation of tablet dosage form, protocol preparation and regulatory basis for process validation in industry. It gives in detail the validation of each step of the manufacturing process of tablets through wet granulation.

  10. Industrial irradiation processing of polymers. Status and prospects. Report

    International Nuclear Information System (INIS)

    At the close of the 20th century and now in the beginning of the 21st, several changes have taken place in the businesses marketing radiation source technologies used in industrial radiation processing. Such changes involved more than just transitions in ownership and product line extensions for proven equipment, but also the market successes of new accelerator technologies, the evolution of high intensity X ray processing and the ability of providers and users of isotope sources to cope with heightened security issues involving radioactive materials. Concurrent with this evolution in source technologies, there has been a modest increase in the acceptance of radiation processing for polymeric materials. At the same time, there has been a broadening of polymer options available to formulators and producers of irradiated products. Unfortunately, however, there have been no major market breakthroughs; no adoption of radiation processing on a large scale in some new industrial application. For example, the much proven and long hoped for use of radiation processing by the food industry remains at a very small scale. This is despite the fact that this technology has cleared most regulatory hurdles that call for efficacy and the maintenance of food quality. This brief paper describes some of these changes and outlines some current issues that remain to be addressed

  11. Approximation of theoretical energy-saving potentials for the petrochemical industry using energy balances for 68 key processes

    NARCIS (Netherlands)

    Neelis, M.L.; Patel, M.K.; Bach, P.; Haije, W.G.; Blok, K.

    2007-01-01

    We prepared energy and carbon balances for 68 petrochemical processes in the petrochemical industry for Western Europe, the Netherlands and the world. We analysed the process energy use in relation to the heat effects of the chemical reactions and quantified in this way the sum of all energy inputs

  12. Welcome to Processes—A New Open Access Journal on Chemical and Biological Process Technology

    Directory of Open Access Journals (Sweden)

    Michael A. Henson

    2012-11-01

    Full Text Available As the result of remarkable technological progress, this past decade has witnessed considerable advances in our ability to manipulate natural and engineered systems, particularly at the molecular level. These advancements offer the potential to revolutionize our world through the development of novel soft and hard materials and the construction of new cellular platforms for chemical and pharmaceutical synthesis. For these technologies to truly impact society, the development of process technology that will enable effective large-scale production is essential. Improved processes are also needed for more established technologies in chemical and biochemical manufacturing, as these industries face ever increasing competitive pressure that mandates continuous improvement. [...

  13. Chemical interaction matrix between reagents in a Purex based process

    International Nuclear Information System (INIS)

    The United States Department of Energy (DOE) is the responsible entity for the disposal of the United States excess weapons grade plutonium. DOE selected a PUREX-based process to convert plutonium to low-enriched mixed oxide fuel for use in commercial nuclear power plants. To initiate this process in the United States, a Mixed Oxide (MOX) Fuel Fabrication Facility (MFFF) is under construction and will be operated by Shaw AREVA MOX Services at the Savannah River Site. This facility will be licensed and regulated by the U.S. Nuclear Regulatory Commission (NRC). A PUREX process, similar to the one used at La Hague, France, will purify plutonium feedstock through solvent extraction. MFFF employs two major process operations to manufacture MOX fuel assemblies: (1) the Aqueous Polishing (AP) process to remove gallium and other impurities from plutonium feedstock and (2) the MOX fuel fabrication process (MP), which processes the oxides into pellets and manufactures the MOX fuel assemblies. The AP process consists of three major steps, dissolution, purification, and conversion, and is the center of the primary chemical processing. A study of process hazards controls has been initiated that will provide knowledge and protection against the chemical risks associated from mixing of reagents over the life time of the process. This paper presents a comprehensive chemical interaction matrix evaluation for the reagents used in the PUREX-based process. Chemical interaction matrix supplements the process conditions by providing a checklist of any potential inadvertent chemical reactions that may take place. It also identifies the chemical compatibility/incompatibility of the reagents if mixed by failure of operations or equipment within the process itself or mixed inadvertently by a technician in the laboratories. (authors)

  14. Alternatives to Organic Solvents in Industrial Cleaning Processes

    DEFF Research Database (Denmark)

    Jacobsen, Thomas

    1998-01-01

    industry, and vehicle repair and maintenance. There are, however, other elements that influence the possibility to substitute. The requirements to the resulting surface, depending on the following treatment of the surface. The character of the soilings to be removed. The possible presence of other...... cleaning agents in offset printing companies instead of volatile, toxic organic solvents. The present study is based on a project with the aim of defining other industrial processes, where organic solvents used for cleaning or degreasing can be replaced by non-volatile, low-toxic products, which are based...... on esters from fatty acids of vegetable origin (vegetable esters - VE).The study indicates that industrial cleaning/degreasing with organic solvents may be substituted with VEs on metal surfaces and on some coated surfaces, in manufacture of paints and inks, use of paints, use of inks (printing), metal...

  15. Ergonomic evaluation of cheese production process in dairy industries

    Directory of Open Access Journals (Sweden)

    Luciano Brito Rodrigues

    2008-07-01

    Full Text Available The present work consisted of an analysis of work conditions aspects in small dairy industries from southwest region of Bahia state. The study considered the analysis of environmental variables and the organization of the work in the production process of cheeses. The analysis was performed by means of observations in loco and measurement of the environmental variables related to noise, illumination and temperature. The main problems are related to posture and inadequate illumination. The parameters were evaluated according to the norms and legislation available in order to propose suggestions for the identified problems, objectifying the comfort and safety of workers and the consequent improvement of activities developed in these industries. Keywords: Ergonomics, Dairy industries, Environmental comfort.

  16. LIGNOCELLULOSIC FEEDSTOCK BIOREFINERY—THE FUTURE OF CHEMICAL AND ENERGY INDUSTRY

    Directory of Open Access Journals (Sweden)

    Shengdong Zhu

    2009-05-01

    Full Text Available The sustainable development of the chemical and energy industry is an indispensable component of our sustainable society. However, the traditional chemical and energy industry depends heavily on such non-renewable fossil resources as oil, coal, and natural gas. Its feedstock shortage and the resultant environmental and climatic problems pose a great threat for any type of sustainable development. Lignocellulosic materials are the most abundant renewable resources in the world and their efficient utilization provides a practical route to address these challenges. The lignocellulosic feedstock bio-refinery is an effective model for the comprehensive utilization of lignocellulosic materials, and it will play vital role in the future development of chemical and energy industry.

  17. Evaluation model for safety capacity of chemical industrial park based on acceptable regional risk

    Institute of Scientific and Technical Information of China (English)

    Guohua Chen; Shukun Wang; Xiaoqun Tan

    2015-01-01

    The paper defines the Safety Capacity of Chemical Industrial Park (SCCIP) from the perspective of acceptable regional risk. For the purpose of exploring the evaluation model for the SCCIP, a method based on quantitative risk assessment was adopted for evaluating transport risk and to confirm reasonable safety transport capacity of chemical industrial park, and then by combining with the safety storage capacity, a SCCIP evaluation model was put forward. The SCCIP was decided by the smaller one between the largest safety storage capacity and the maximum safety transport capacity, or else, the regional risk of the park will exceed the acceptable level. The developed method was applied to a chemical industrial park in Guangdong province to obtain the maximum safety transport capacity and the SCCIP. The results can be realized in the regional risk control of the park effectively.

  18. Chemical kinetics, stochastic processes, and irreversible thermodynamics

    CERN Document Server

    Santillán, Moisés

    2014-01-01

    This book brings theories in nonlinear dynamics, stochastic processes, irreversible thermodynamics, physical chemistry, and biochemistry together in an introductory but formal and comprehensive manner.  Coupled with examples, the theories are developed stepwise, starting with the simplest concepts and building upon them into a more general framework.  Furthermore, each new mathematical derivation is immediately applied to one or more biological systems.  The last chapters focus on applying mathematical and physical techniques to study systems such as: gene regulatory networks and ion channels. The target audience of this book are mainly final year undergraduate and graduate students with a solid mathematical background (physicists, mathematicians, and engineers), as well as with basic notions of biochemistry and cellular biology.  This book can also be useful to students with a biological background who are interested in mathematical modeling, and have a working knowledge of calculus, differential equatio...

  19. Chemical Processing Department monthly report for March 1963

    Energy Technology Data Exchange (ETDEWEB)

    1963-04-22

    This report, from the Chemical Processing Department at HAPO for March 1963, discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations; facilities engineering; research; employee relations; and weapons manufacturing operation.

  20. Chemical Processing Department monthly report for September 1963

    Energy Technology Data Exchange (ETDEWEB)

    1963-10-21

    This report, from the Chemical Processing Department at HAPO for September 1963, discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations, facilities engineering; research; employee relations; weapons manufacturing operation; and power and crafts operation.

  1. Chemical Processing Department monthly report for February 1957

    Energy Technology Data Exchange (ETDEWEB)

    1957-03-21

    This report from the Chemical Processing Department at HAPO, discusses the following: Production operation, purex operation, redox operation, finished products operation, power and general maintenance operation, financial operation, facilities engineering operation, research and engineering operation, and employee relations operation.

  2. Chemical Processing Department monthly report for September 1962

    Energy Technology Data Exchange (ETDEWEB)

    1962-10-23

    This report, for September 1962 from the Chemical Processing Department at HAPO, discusses the following; Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations; facilities engineering; research; and employee relations.

  3. Chemical Processing Department monthly report for February 1959

    Energy Technology Data Exchange (ETDEWEB)

    1959-03-20

    This report for February 1959, from the Chemical Processing Department at HAPO, discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance: Financial operations; facilities engineering; research; and employee relations.

  4. Chemical Processing Department monthly report for August 1959

    Energy Technology Data Exchange (ETDEWEB)

    1959-09-21

    This report, from the Chemical Processing Department at HAPO, discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations; facilities engineering; research; and employee relations.

  5. Process Design and Evaluation for Chemicals Based on Renewable Resources

    DEFF Research Database (Denmark)

    Fu, Wenjing

    One of the key steps in process design is choosing between alternative technologies, especially for processes producing bulk and commodity chemicals. Recently, driven by the increasing oil prices and diminishing reserves, the production of bulk and commodity chemicals from renewable feedstocks has...... development of chemicals based on renewable feedstocks. As an example, this thesis especially focuses on applying the methodology in process design and evaluation of the synthesis of 5-hydroxymethylfurfural (HMF) from the renewable feedstock glucose/fructose. The selected example is part of the chemoenzymatic...... gained considerable interest. Renewable feedstocks usually cannot be converted into fuels and chemicals with existing process facilities due to the molecular functionality and variety of the most common renewable feedstock (biomass). Therefore new types of catalytic methods as well as new types...

  6. Chemical Processing Department monthly report for July 1964

    Energy Technology Data Exchange (ETDEWEB)

    1964-08-21

    This report, for July 1964 from the Chemical Processing Department at HAPO, discusses the following: Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations; facilities engineering; research; employee relations; weapons manufacturing operation; and safety and security.

  7. Chemical Processing Department monthly report for July 1957

    Energy Technology Data Exchange (ETDEWEB)

    McCune, F. K.; Johnson, W. E.; MacCready, W. K.; Warren, J. H.; Schroeder, O. C.; Groswith, C. T.; Mobley, W. N.; LaFollette, T. G.; Grim, K. G.; Shaw, H. P.; Richards, R. B.; Roberts, D. S.

    1957-08-22

    This report, for July 1957 from the Chemical Processing Department at HAPO, discusses the following; Production operation; Purex and Redox operation; Finished products operation; maintenance; Financial operations; facilities engineering; research; and employee relations.

  8. Prioritizing substitution of organic solvents in industrial cleaning processes

    DEFF Research Database (Denmark)

    Rasmussen, Pia Brunn; Jacobsen, Thomas

    1997-01-01

    A method for prioritizing the substitution of volatile organic compounds (VOC) used in industrial cleaning processes is developed. The result is a matrix, which, if all information can be obtained, gives a comprehensive description of the effects, exposure and emission of VOC, as well...... as the prospects for performing the substitution with a vegetable ester. It can be a tool for companies to decide which cleaning process has the highest demand for substitution, if there is a choice between several processes, but it may also be a tool to convince companies to use non-volatile, low-toxic cleaning...

  9. Application of Laser Ablation Processing in Electric Power System Industries

    Science.gov (United States)

    Konagai, Chikara; Sano, Yuji; Nittoh, Koichi; Kuwako, Akira

    The present status of laser ablation processing applied in electric power system industries is reviewed. High average power LD-pumped Nd:YAG lasers with Q-switch have been developed and currently introduced into various applications. Optical fiber based laser beam delivery systems for Q-switched pulse laser are also being developed these years. Based on such laser and beam delivery technology, laser ablation processes are gradually introduced in maintenance of nuclear power plant, thermal power plant and electrical power distribution system. Cost effectiveness, robustness and reliability of the process is highly required for wide utilization in these fields.

  10. "A Note on New Product Project Selection Model: Empirical Analysis in Chemical Industry" (in Japanese)

    OpenAIRE

    Kenichi Kuwashima; Junichi Tomita

    2001-01-01

    By focusing its attention on one particular scoring method that is used to evaluate R&D projects, this paper seeks to specify empirically the factors that discriminate successful projects from failed projects in the Japanese chemical industry. Our statistical analysis revealed that when projects are evaluated in this industry, three factors, marketability, technology, and synergistic potential, tend to be valued by practitioners approximately in a 3:2:1 ratio. Although the project evaluations...

  11. Predicting work-related flow in the chemical industry / Erika Maree

    OpenAIRE

    Maree, Erika

    2008-01-01

    In a new world of work characterised by competitiveness, benchmarking, technological innovation and efficiency, the South African chemical industry needs to function at an optimal level to meet the demands of its stakeholders and employees. The industry needs leadership of the highest standard and an efficient, productive workforce. The objective of this study was to determine the relationship between leader empowering behaviour, self-efficacy, job resources and work-related flow for empl...

  12. Towards A Unified HFE Process For The Nuclear Industry

    Energy Technology Data Exchange (ETDEWEB)

    Jacques Hugo

    2012-07-01

    As nuclear power utilities embark on projects to upgrade and modernize power plants, they are likely to discover that traditional engineering methods do not typically make provision for the integration of human considerations. In addition, human factors professionals will find that traditional human performance methods such as function allocation, task analysis, human reliability analysis and human-machine interface design do not scale well to the complexity of a large-scale nuclear power upgrade project. Up-to-date human factors engineering processes, methods, techniques and tools are required to perform these kinds of analyses. This need is recognized widely in industry and an important part of the Department of Energy’s Light Water Reactor Sustainability Program deals with identifying potential impacts of emerging technologies on human performance and the technical bases needed to address them. However, so far no formal initiative has been launched to deal with the lack of integrated processes. Although human factors integration frameworks do exist in industries such as aviation or defense, no formal integrated human factors process exists in the nuclear industry. As a first step towards creating such a process, a “unified human factors engineering process” is proposed as a framework within which engineering organizations, human factors practitioners and regulatory bodies can ensure that human factors requirements are embedded in engineering activities throughout the upgrade project life cycle.

  13. Plasma-chemical treatment of industrial wastewaters from brewery “Brasseries du Cameroun”, Bafoussam factory

    Directory of Open Access Journals (Sweden)

    Estella T. Njoyim

    2016-01-01

    Full Text Available This work focuses on the study of the chemical reactivity of an advanced oxidation process (AOP, called the plasma technique, in order to prevent industrial effluent from pollution and better cope to several damage of environment. The oxidizing and acidifying properties of an electric discharge of the gliding arc plasma and its application to a target which is a real effluent (wastewater from Brasseries du Cameroun -Bafoussam plant fascinated this study. Samples were collected from the central collecting point (CCP of the effluent. The collected effluent samples were analyzed by volumetric and instrumental methods, and then exposed to the gliding discharge during specific time periods of 3-60 min to exhibit the desired decontamination effects. At the end of 60 min of exposure time to the discharge, 52.22% and 50.19% obtained respectively to abatement of turbidity and rate of fall in absorbance. This reduction can be explained by the fact that the coloured compounds were degraded and this degradation gave rise to the transparent appearance observed. After stopping the discharge process, the abatement percentage of BOD5, COD and TOC, were obtained at the same time (60min with values of 52.05%, 68.63% and 69.37% respectively. These results reflect the considerable reduction of the pollution load of the wastewaters collected from CCP of the brewery. These results showed that the effectiveness of the gliding arc plasma depends not only on the physico-chemical parameters of the target, but also on the exposure time and concluded that the non-thermal plasma process alone provides good reduction of organic pollutants in wastewater. Moreover, the phenomenon of post- discharge, even though not studied in details demonstrated that, after switching the discharge, the evolution of parameters such as pH, electrical conductivity and TDS increase.

  14. A Magnetic Induction Tomography System for Prospective Industrial Processing Applications

    Institute of Scientific and Technical Information of China (English)

    Hsin-Yu Wei; Manuchehr Solelmanl

    2012-01-01

    Magnetic induction tomography(MIT) is one of the newest industrial process imaging techniques.Main industrial applications of the MIT imaging are in high conductive flow imaging.However,recently it has been shown that the MIT may be useful for low conductive process imaging.This paper presents a cost effective hardware design for MIT in industrial applications,called Bath-MKI industrial MIT system.The system comprises 8 inductor coils and has the possibility of expansion to 16 coils.The excitation signals and the measured voltages are generated and measured using a LabView based system.Two 16 by 1 multiplexers are used to select between the coils.Measurements,excitation and multiplexing are all controlled by a National Instrument(NI) USB based DAQ:USB-6259 and a signal generator.Using the same electronics,the prototype is tested with two different coil arrays;one is a small scale ferrite core coil and one larger scale air cored coil.Experimental image reconstruction results are shown using both small scale and large scale coil arrays.

  15. IMPLEMENTATION OF A SAFETY PROGRAM FOR THE WORK ACCIDENTS’ CONTROL. A CASE STUDY IN THE CHEMICAL INDUSTRY

    Directory of Open Access Journals (Sweden)

    Edison Cesar de Faria Nogueira

    2015-03-01

    Full Text Available This article presents a case study related to the implementation of a Work Safety Program in a chemical industry, based on the Process Safety Program, PSP, of a huge energy company. The research was applied, exploratory, qualitative and with and data collection method through documentary and bibliographical research. There will be presented the main practices adopted in order to make the Safety Program a reality inside a chemical industry, its results and contributions for its better development. This paper proposes the implementation of a Safety Program must be preceded by a diagnosis of occupational safety and health management system and with constant critical analysis in order to make the necessary adjustments.

  16. Industrial biotechnology for the production of bio-based chemicals--a cradle-to-grave perspective.

    Science.gov (United States)

    Hatti-Kaul, Rajni; Törnvall, Ulrika; Gustafsson, Linda; Börjesson, Pål

    2007-03-01

    Shifting the resource base for chemical production from fossil feedstocks to renewable raw materials provides exciting possibilities for the use of industrial biotechnology-based process tools. This review gives an indication of the current developments in the transition to bio-based production, with a focus on the production of chemicals, and points out some of the challenges that exist in the large-scale implementation of industrial biotechnology. Furthermore, the importance of evaluating the environmental impact of bio-based products with respect to their entire life cycle is highlighted, demonstrating that the choice of the raw material often turns out to be an important parameter influencing the life cycle performance. PMID:17234288

  17. Analysis of chemical coal cleaning processes. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    Six chemical coal cleaning processes were examined. Conceptual designs and costs were prepared for these processes and coal preparation facilities, including physical cleaning and size reduction. Transportation of fine coal in agglomerated and unagglomerated forms was also discussed. Chemical cleaning processes were: Pittsburgh Energy Technology Center, Ledgemont, Ames Laboratory, Jet Propulsion Laboratory (two versions), and Guth Process (KVB). Three of the chemical cleaning processes are similar in concept: PETC, Ledgemont, and Ames. Each of these is based on the reaction of sulfur with pressurized oxygen, with the controlling factor being the partial pressure of oxygen in the reactor. All of the processes appear technically feasible. Economic feasibility is less certain. The recovery of process chemicals is vital to the JPL and Guth processes. All of the processes consume significant amounts of energy in the form of electric power and coal. Energy recovery and increased efficiency are potential areas for study in future more detailed designs. The Guth process (formally designed KVB) appears to be the simplest of the systems evaluated. All of the processes require future engineering to better determine methods for scaling laboratory designs/results to commercial-scale operations. A major area for future engineering is to resolve problems related to handling, feeding, and flow control of the fine and often hot coal.

  18. Chemical Industry Corrosion Management: A Comprehensive Information System (ASSET 2). Final Report

    Energy Technology Data Exchange (ETDEWEB)

    John, Randy C. [Shell Global Solutions, Houston, TX (United States); Young, Arthur L. [Humberside Solutions, Toronto, ON (Canada); Pelton, Arthur D. [CRCT, Ecole Polytechnique de Montreal, Quebec (Canada); Thompson, William T. [Royal Military College of Canada, Kingston, ON (Canada); Wright, Ian G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2008-10-10

    The research sponsored by this project has greatly expanded the ASSET corrosion prediction software system to produce a world-class technology to assess and predict engineering corrosion of metals and alloys corroding by exposure to hot gases. The effort included corrosion data compilation from numerous industrial sources and data generation at Shell Oak Ridge National Laboratory and several other companies for selected conditions. These data were organized into groupings representing various combinations of commercially available alloys and corrosion by various mechanisms after acceptance via a critical screening process to ensure the data were for alloys and conditions, which were adequately well defined, and of sufficient repeatability. ASSET is the largest and most capable, publicly-available technology in the field of corrosion assessment and prediction for alloys corroding by high temperature processes in chemical plants, hydrogen production, energy conversion processes, petroleum refining, power generation, fuels production and pulp/paper processes. The problems addressed by ASSET are: determination of the likely dominant corrosion mechanism based upon information available to the chemical engineers designing and/or operating various processes and prediction of engineering metal losses and lifetimes of commercial alloys used to build structural components. These assessments consider exposure conditions (metal temperatures, gas compositions and pressures), alloy compositions and exposure times. Results of the assessments are determination of the likely dominant corrosion mechanism and prediction of the loss of metal/alloy thickness as a function of time, temperature, gas composition and gas pressure. The uses of these corrosion mechanism assessments and metal loss predictions are that the degradation of processing equipment can be managed for the first time in a way which supports efforts to reduce energy consumption, ensure structural integrity of equipment

  19. Chemical Processes and Thresholds in Hawaiin Soils

    Science.gov (United States)

    Chadwick, O.

    2007-12-01

    The Hawaiian Islands are a useful natural laboratory for studying soil development particularly those that can be understood using a matrix of chonosequences and climosequences. The islands are formed over a stationary mantle plume and then are carried to the northwest on the Pacific Plate. Thus the islands get older with distance from the hotspot; Kauai has remnant shield surfaces whose lavas date to about 4,000 ky. It is possible to sample soils that are developing on different age flows ranging from a few hundred years to a few million years. Additionally, individual volcanoes are impacted by differing amounts of rainfall depending on location with respect to the northeasterly trade winds. Whereas rainfall over the open ocean near Hawaii is about 700 mm, rainfall over the Islands ranges from 150 to 11,000 mm. Hawaii is minimally impacted by mineral aerosol additions compared to continental areas and this has a significant impact on soil development. More than 100 soil profiles have been sampled along the Hawaii time-climate matrix with some surprising results. For example, in arid soils might be expected to develop smectite clays, but they are rich in halloysite and allophane. Importantly, these same soils show a trend from high-Mg calcite to dolomite as carbonates accumulate within the profiles - this is one of the first documented occurrences of pedogenic dolomite that is not associated with high levels of salts. It appears that lack of smectite formation lowers the incorporation of Mg into silicate clays and increases its incorporation into carbonates. This is an unusual pedogenic process that seems to be enhanced by the lack of substantial amounts of mica in the basalt derived soils. The only mica is in surface horizons that receive dust derived from distant continents. Without mica there is no template to allow smectite clay formation under the rapid wetting and drying regimes encountered in the arid soils. At the same time that halloysite is forming, iron

  20. Limitations of mathematical modelling and numerical simulation of industrial and laboratory high-pressure processes

    Science.gov (United States)

    Rauh, Cornelia; Delgado, Antonio

    2011-03-01

    High pressures up to several hundreds of MPa are utilised in a wide range of applications in chemical engineering, bioengineering, and food engineering, aiming at selective control of (bio-)chemical reactions. Non-uniformity of process conditions may threaten the safety and quality of the resulting products as the process conditions such as pressure, temperature, and treatment history are crucial for the course of (bio-)chemical reactions. Therefore, thermofluid dynamical phenomena during the high-pressure process have to be examined, and tools to predict process uniformity and to optimise the processes have to be developed. Recently, mathematical models and numerical simulations of laboratory and industrial scale high-pressure processes have been set up and validated by experimental results. This contribution deals with the assumption of the modelling that relevant (bio-)chemical compounds are ideally dissolved or diluted particles in a continuum flow. By considering the definition of the continuum hypothesis regarding the minimum particle population in a distinct volume, limitations of this modelling and simulation are addressed.

  1. Implementation of Responsible Care in the chemical industry: Evidence from Greece

    Energy Technology Data Exchange (ETDEWEB)

    Evangelinos, K.I. [University of the Aegean, Department of Environment, University Hill, 81100, Mytilini (Greece); Nikolaou, I.E., E-mail: inikol@env.duth.gr [Democritus University of Thrace, Department of Environmental Engineering, Vas. Sofias 12, 67100, Xanthi (Greece); Karagiannis, A. [General Chemical State Laboratory Division of Rhodos, Haritou Square 17, 85100, Rodos (Greece)

    2010-05-15

    The chemical industry can be held accountable for numerous large-scale accidents which have led to the release of dangerous hazardous materials, pollutants and toxic chemicals into the environment, two well-known examples being the Union Carbide Bhopal disaster and the Three Mile Island tragedy). To ensure environmental protection and the Health and Safety (H and S) of communities, the chemical industry has voluntarily adopted integrated management programs such as the Responsible Care Program. The theoretical body of relevant literature attempts to explain the origin of the Responsible Care Program (RCP) through socio-political and economic theories. At the same time, the empirical research examines the ways in which various factors affect the choice of the chemical industry in their adoption of the RCP. This paper contributes to the debate by examining the challenges and barriers faced by the Greek chemical industry when adopting RCP, the environmental and H and S issues that prevail and finally, the extent of participation of stakeholders in the planning of RCP in the sector.

  2. Implementation of Responsible Care in the chemical industry: Evidence from Greece

    International Nuclear Information System (INIS)

    The chemical industry can be held accountable for numerous large-scale accidents which have led to the release of dangerous hazardous materials, pollutants and toxic chemicals into the environment, two well-known examples being the Union Carbide Bhopal disaster and the Three Mile Island tragedy). To ensure environmental protection and the Health and Safety (H and S) of communities, the chemical industry has voluntarily adopted integrated management programs such as the Responsible Care Program. The theoretical body of relevant literature attempts to explain the origin of the Responsible Care Program (RCP) through socio-political and economic theories. At the same time, the empirical research examines the ways in which various factors affect the choice of the chemical industry in their adoption of the RCP. This paper contributes to the debate by examining the challenges and barriers faced by the Greek chemical industry when adopting RCP, the environmental and H and S issues that prevail and finally, the extent of participation of stakeholders in the planning of RCP in the sector.

  3. Chemicals in the process chain from raw material to product

    International Nuclear Information System (INIS)

    As described in this presentation, chemicals are added at various points along the physical flow from oil/gas well to sold products. They have several functions and are added in different amounts. The chemicals may have a negative impact on the environment by emission to sea. But they can also reduce the regularity of the processing equipment and the prices of the products. Therefore, Statoil has begun a research project that aims to develop improved methods and tools for the prediction of the distribution of chemicals in the process chain and the unwanted effects they might have on the environment, on downstream installations and on the products. 4 refs., 11 figs

  4. One year online chemical speciation of submicron particulate matter (PM1) sampled at a French industrial and coastal site

    Science.gov (United States)

    Zhang, Shouwen; Riffault, Véronique; Dusanter, Sébastien; Augustin, Patrick; Fourmentin, Marc; Delbarre, Hervé

    2015-04-01

    The harbor of Dunkirk (Northern France) is surrounded by different industrial plants (metallurgy, petrochemistry, food processing, power plant, etc.), which emit gaseous and particulate pollutants such as Volatile Organic Compounds (VOCs), oxides of nitrogen (NOx) and sulfur (SO2), and submicron particles (PM1). These emissions are poorly characterized and their impact on neighboring urban areas has yet to be assessed. Studies are particularly needed in this type of complex environments to get a better understanding of PM1sources, especially from the industrial sector, their temporal variability, and their transformation. Several instruments, capable of real-time measurements (temporal resolution ≤ 30 min), were deployed at a site located downwind from the industrial area of Dunkirk for a one-year duration (July 2013-September 2014). An Aerosol Chemical Speciation Monitor (ACSM) and an Aethalometer monitored the main chemical species in the non-refractory submicron particles and black carbon, respectively. Concomitant measurements of trace gases and wind speed and direction were also performed. This dataset was analyzed considering four wind sectors, characteristics of marine, industrial, industrial-urban, and urban influences, and the different seasons. We will present a descriptive analysis of PM1, showing strong variations of ambient concentrations, as well as evidences of SO2 to SO4 gas-particle conversion when industrial plumes reached the monitoring site. The organic fraction measured by ACSM (37% of the total mass on average) was analyzed using a source-receptor model based on Positive Matrix Factorization (PMF) to identify chemical signatures of main emission sources and to quantify the contribution of each source to the PM1 budget given the wind sector. Four main factors were identified: hydrocarbon organic aerosol (HOA), oxygenated organic aerosol (OOA), biomass burning organic aerosol (BBOA) and cooking-like organic aerosol (COA). Overall, the total PM

  5. Reducing aquatic hazards of industrial chemicals: probabilistic assessment of sustainable molecular design guidelines.

    Science.gov (United States)

    Connors, Kristin A; Voutchkova-Kostal, Adelina M; Kostal, Jakub; Anastas, Paul; Zimmerman, Julie B; Brooks, Bryan W

    2014-08-01

    Basic toxicological information is lacking for the majority of industrial chemicals. In addition to increasing empirical toxicity data through additional testing, prospective computational approaches to drug development aim to serve as a rational basis for the design of chemicals with reduced toxicity. Recent work has resulted in the derivation of a "rule of 2," wherein chemicals with an octanol-water partition coefficient (log P) less than 2 and a difference between the lowest unoccupied molecular orbital and the highest occupied molecular orbital (ΔE) greater than 9 (log P9 eV) are predicted to be 4 to 5 times less likely to elicit acute or chronic toxicity to model aquatic organisms. The present study examines potential reduction of aquatic toxicity hazards from industrial chemicals if these 2 molecular design guidelines were employed. Probabilistic hazard assessment approaches were used to model the likelihood of encountering industrial chemicals exceeding toxicological categories of concern both with and without the rule of 2. Modeling predicted that utilization of these molecular design guidelines for log P and ΔE would appreciably decrease the number of chemicals that would be designated to be of "high" and "very high" concern for acute and chronic toxicity to standard model aquatic organisms and end points as defined by the US Environmental Protection Agency. For example, 14.5% of chemicals were categorized as having high and very high acute toxicity to the fathead minnow model, whereas only 3.3% of chemicals conforming to the design guidelines were predicted to be in these categories. Considerations of specific chemical classes (e.g., aldehydes), chemical attributes (e.g., ionization), and adverse outcome pathways in representative species (e.g., receptor-mediated responses) could be used to derive future property guidelines for broader classes of contaminants.

  6. Closing the loop: Captured CO2 as a feedstock in the chemical industry

    OpenAIRE

    Otto, Alexander; Grube, Thomas; Schiebahn, Sebastian; Stolten, Detlef

    2015-01-01

    The utilization of ‘captured’ CO2 as a feedstock in the chemical industry for the synthesis of certain chemical products offers an option for preventing several million tons of CO2 emissions each year while increasing independence from fossil fuels. For this reason, interest is increasing in the feasibility of deploying captured CO2 in this manner. Numerous scientific publications describe laboratory experiments in which CO2 has been successfully used as a feedstock for the synthesis of vario...

  7. Producing Bio-Based Bulk Chemicals Using Industrial Biotechnology Saves Energy and Combats Climate Change

    OpenAIRE

    Hermann, B.G.; de Blok, K; Patel, M.K. (Martin)

    2007-01-01

    The production of bulk chemicals from biomass can make a significant contribution to solving two of the most urgent environmental problems: climate change and depletion of fossil energy. We analyzed current and future technology routes leading to 15 bulk chemicals using industrial biotechnology and calculated their CO2 emissions and fossil energy use. Savings of more than 100% in non-renewable energy use and greenhouse gas emissions are already possible with current state of the art biotechno...

  8. Strategic marketing types: Evidence from the European meat processing industry

    DEFF Research Database (Denmark)

    Strandskov, Jesper; Hundahl, Lone; Laursen, Christina

    Executive summary 1. The discovery of a small number of generic strategies or competitive positions that would work equally well across product-markets, businesses and industries, would be an extremely important finding for business practicians. In particular the question of whether or why...... marketing strategies, (2) places these clusters in a strategic typology in order to better understand their position in the marketplace, and (3) analyses these strategic marketing types in terms of performance outcomes and differences in corporate attitudes and goals. 3. The meat processing sector in Europe...... is a mature and relatively stable industry in which consolidation is a continuing process. In spite of the overall trends facing all meat processors, they are confronted by different strategic problems and challenges because of their differences, for example, in terms of product offerings, degrees...

  9. Chemical and Physical Characteristics of Soy Proteins for New Industrial Applications

    Science.gov (United States)

    Arboleda Fernandez, Julio Cesar

    Despite of being environmentally friendly, biocompatible, rich in chemical functionality and abundant as residual materials, soy proteins (SPs) are used for low added value applications. In this work, SPs were studied and used as potentially useful biomacromolecules for different industrial applications with high added value. Initially the effect of acid hydrolysis of soy proteins as a potential route for subsequent surface modification was studied, finding that SP hydrolysates tend to form less aggregates and to adsorb at faster rates compared with unmodified SP; nevertheless, it was also found that the amount of protein adsorbed and water contact angle of the treated surface does not change significantly. Secondly, the gel forming properties of SPs were used to produce aerogels with densities in the order of 0.1 g/cm3. To improve their mechanical properties, the reinforcement of these materials with cellulose nanofibers was studied, obtaining composite aerogels with SP loadings as high as ca. 70% that display a compression modulus of 4.4 MPa, very close to the value obtained from the pure nanofibers aerogels. The composite materials gain moisture (up to 5%) in equilibrium with 50% RH air. Futhermore, their physical integrity is unchanged upon immersion in polar and non-polar solvents, exhibiting sorption rates dependent on the aerogel composition, morphology and swelling abilities. Finally, different soy protein based products and derivatives were used to enhance the dry strength properties of wood fibers in paper production. Experiments using soy flour, soy protein isolate, soy protein isolate hydrolysates, cationized soy flour, and soy flour combined with cationic starch and chitosan were done, obtaining satisfactory results when soy protein flour was utilized in combination with conventional treatments involving cationic polymers. The current results confirm the opportunity to valorize residual soy products that are underutilized today as alternatives to oil

  10. Used solid catalysts from chemical and petrochemical industries; Les catalyseurs solides uses de l`industrie chimique et du raffinage petrolier

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    A comprehensive survey of the solid catalysts used in the chemical and petrochemical industries is presented; information on solid catalyst market demand prospective for 1998, the nature of solid catalysts used in the various industrial sectors and for the various chemical products production, the european catalysts manufacturers, solid catalyst poisons and inhibitors according to the various types of chemical reactions, mean compositions of used solid catalysts, an assessment of the volume of used solid catalysts generated by chemical and petrochemical industries, the various ways of solid catalyst regeneration and disposal, the potential for off-site regeneration of used catalysts, and French and European regulations, is presented

  11. Mini-channel heat exchangers for industrial distillation processes

    OpenAIRE

    Van de Bor, D.M.

    2014-01-01

    In this thesis the technical and economic performance of compression-resorption heat pumps has been investigated. The main objective of this thesis was to improve the performance and reduce the investment costs of compression-resorption heat pumps applied in process industry. A model that is able to capture the performance of most heat pumps based on the Carnot and Lorentz COP by only knowing the temperature driving forces and estimating the compressor isentropic efficiency has been developed...

  12. Alternative Fungicides for the Leather Industry: Application in Various Processes.

    OpenAIRE

    Cuadros Domènech, Sara; Manresa Presas, Mª Angels; Font Vallès, Joaquim; Puig Vidal, Rita; Marsal Monge, Agustí

    2013-01-01

    Increasingly stringent environmental legislation and indispensable use of fungicides in the tanning industry obliges tanners to adapt their processes to alternative technologies with lower environmental impact, including the search for new fungicide systems that comply with those rules. The fungicidal capacities of alternative compounds diiodomethyl p-tolylsulfone (DIMPTS), 3-iodo- 2-propynyl N-butylcarbamate (IPBC) and thiabendazole / 2-thiazol-4-yl-1H-benzo imidazole(TBZ) were compared t...

  13. Development of sustainable paper coatings using nanoscale industrial surface processing

    OpenAIRE

    Markert, Frank; Breedveld, Leo; Lahti, Johanna; Vangeneuenden, Dirk

    2010-01-01

    The term “sustainable production” comprises a weighting of economical, environmental and social considerations. The three categories are mutually dependent and therefore an assessment needs to take a systems analysis approach to make the right decisions by the various stakeholders ranging from developers, production industries, consumers and authorities. Part of the consideration is the public perception of the new product and the processes to manufacture it, which is an important aspect for ...

  14. Rotating thermal flows in natural and industrial processes

    CERN Document Server

    Lappa, Marcello

    2012-01-01

    Rotating Thermal Flows in Natural and Industrial Processes provides the reader with a systematic description of the different types of thermal convection and flow instabilities in rotating systems, as present in materials, crystal growth, thermal engineering, meteorology, oceanography, geophysics and astrophysics. It expressly shows how the isomorphism between small and large scale phenomena becomes beneficial to the definition and ensuing development of an integrated comprehensive framework.  This allows the reader to understand and assimilate the underlying, quintessential mechanisms withou

  15. Tutorial for mixture-process experiments with an industrial application

    Directory of Open Access Journals (Sweden)

    Luiz Henrique Abreu Dal Bello

    2011-12-01

    Full Text Available This article presents a tutorial on mixture-process experiments and a case study of a chemical compound used in the delay mechanism for starting a rocket engine. The compound consists in a three-component mixture. Besides the mixture components, two process variables are considered. For the model selection, the use of an information criterion showed to be efficient in the case under study. A linear regression model was fitted. Through the developed model, the optimal proportions of the mixture components and the levels of the process variables were determined.

  16. Defects quantization in industrial radiographs by image processing

    International Nuclear Information System (INIS)

    This paper refers to the industrial application of image processing using Non Destructive Testing by radiography. The various problems involved by the conception of a numerical tool are described. This tool intends to help radiograph experts to quantify defects and to follow up their evolution, using numerical techniques. The sequences of processings that achieve defect segmentation and quantization are detailed. They are based on the thorough knowledge of radiographs formation techniques. The process uses various methods of image analysis, including textural analysis and morphological mathematics. The interface between the final product and users will occur in an explicit language, using the terms of radiographic expertise without showing any processing details. The problem is thoroughly described: image formation, digitization, processings fitted to flaw morphology and finally product structure in progress. 12 refs

  17. Atmospheric emission of polychlorinated biphenyls from multiple industrial thermal processes.

    Science.gov (United States)

    Liu, Guorui; Zheng, Minghui; Cai, Mingwei; Nie, Zhiqiang; Zhang, Bing; Liu, Wenbin; Du, Bing; Dong, Shujun; Hu, Jicheng; Xiao, Ke

    2013-03-01

    In this study, field measurements were conducted to estimate and characterize the atmospheric emission levels and profiles of polychlorinated biphenyls (PCBs) from multiple industrial thermal processes. The emission levels and profiles of PCBs from five types of thermal processes at twenty-three plants were studied and compared with eight processes reported in our previous studies. Correlation analysis was preformed to identify a marker congener for emission of ΣPCB. A significant correlation was observed between congener CB-118 and ΣPCB (R(2)=0.65 and pprocesses were compared, and this information could be used for studying source-receptor relationships and identifying the specific sources of PCBs. To prioritize the sources for control, the concentrations of PCBs from thirteen industrial thermal sources were compared. The PCB concentrations from secondary zinc smelting and thermal wire reclamation were about one to three order magnitude higher than those of other sources, which suggests that these two sources be given priority in PCB source control. Finally, the atmospheric emission factors of PCBs from the thirteen industrial sources were summarized, and these data will be useful for developing an integrated emission inventory of PCBs.

  18. Public Consultation Processes in Greenland Regarding the Mining Industry

    Directory of Open Access Journals (Sweden)

    Maria Ackrén

    2016-05-01

    Full Text Available Since the Greenland Self-Government Act came into force in 2009, economic development and the right to utilize natural resources in Greenland lies in the hands of the Self-Government. Earlier efforts to establish this authority were made back in the 1970s, when discussions on Home Rule were first on the agenda. Mining industries are not a new activity in Greenland. During the Second World War, Greenlandic cryolite was used to produce aluminum for the North American aircraft industry. Other essential natural resources, such as gold and gemstones, have also received international interest over the years. Greenland's new development aim is to build up a large-scale mining industry. This article elucidates the form of public consultation processes followed in Greenland in connection with two large-scale mining projects and the different views various actors have regarding these events. How did the deliberative democratic process unfold in Greenland regarding these projects? Was the process followed an effective way to manage these kinds of projects? The article shows that two projects that received a lot of media attention: the 2005 iron ore mine project in Isukasia, and the 2001 TANBREEZ-project to extract rare earth elements, used highly different approaches when it comes to deliberative democracy. In the former case, a limited degree of deliberative democracy was used, while in the latter case, the opposite applies.

  19. Investigation of process equipment in petrochemical industry using radioisotope technology

    International Nuclear Information System (INIS)

    Applications of radioisotope technology have proved it self to be an effective techniques for troubleshooting and optimizing industrial process in petrochemical industry. In this study, Khartoum refinery was investigated by gamma scanning technique for better understanding of malfunctions, the scanning were carried out using 60C gamma radiation source with activity of 50 mCi on fractionator and stripper columns, obtained results showed that all trays of the fractionator column were in place but weeping was evident due to fouling or partial tray damage. For the stripper column, results obtained showed that all trays were on their positions and no process anomalies taking place. Heat exchanger was also examined using radiotracer technique with respect to leak detection and residence time distribution. The investigations were carried out using 82Br in the form of di-bromo-para-bensene (C6H4Br2) as a radiotracer. No leak was recorded and the residence time distribution results showed that the process functions were quite normal. Leak was examined using 99mTc as a radiotracer detection to demonstrate the potentials of the technique. The testing was conducted using reflux condenser. Obtained results proved that the technique is sensitive, reliable and can be adopted to investigate heat exchangers in industrial systems.(Author)

  20. Bundle adjustment for data processing of theodolite industrial surveying system

    Institute of Scientific and Technical Information of China (English)

    邹峥嵘; 丁晓利; 曾卓乔; 何凭宗

    2001-01-01

    The photogrammetric bundle adjustment was used in data processing of electronic theodolite industrial surveying system by converting angular observations into virtual photo coordinates. The developed algorithm has ability of precision estimation and data-snooping, do not need initial values of exterior orientation elements and object point coordinates. The form of control condition for the system is quite flexible. Neither centering nor leveling is the theodolite needed and the lay-out of theodolite position is flexible when the system is used for precise survey. Experiments carried out in test field verify the validity of the data processing method.

  1. Difference-based Model Synchronization in an Industrial MDD Process

    DEFF Research Database (Denmark)

    Könemann, Patrick; Kindler, Ekkart; Unland, Ludger

    2009-01-01

    Models play a central role in model-driven software engineering. There are different kinds of models during the development process, which are related to each other and change over time. Therefore, it is difficult to keep the different models consistent with each other. Consistency of different m...... model versions, and for synchronizing other types of models. The main concern is to apply our concepts to an industrial process, in particular keeping usability and performance in mind. Keyword: Model Differencing, Model Merging, Model Synchronization...

  2. Programmatic environmental assessment of the DOE Solar Agricultural and Industrial Process Heat Program

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    The program's potential environmental impacts are evaluated to ensure that environmental issues are considered at the earliest meaningful point in the decision-making process. The existing environment is studied for the following: grain drying; crop drying; livestock shelter heating; food processing; textile products; lumber and wood products; paper products; chemicals; petroleum refining; stone, clay, and glass products; and primary metals industries. Environmental impacts of the proposed action on the following are studied: air quality, water quality, ecosystems, health and safety, land use, esthetics, and social and institutional impacts. (MHR)

  3. Prediction of chemical, physical and sensory data from process parameters for frozen cod using multivariate analysis

    DEFF Research Database (Denmark)

    Bechmann, Iben Ellegaard; Jensen, H.S.; Bøknæs, Niels;

    1998-01-01

    Physical, chemical and sensory quality parameters were determined for 115 cod (Gadus morhua) samples stored under varying frozen storage conditions. Five different process parameters (period of frozen storage, frozen storage. temperature, place of catch, season for catching and state of rigor) were....... PLS models that were able to predict the physical, chemical and sensory quality parameters from the process parameters of the frozen raw material were generated. The prediction abilities of the PLS models were good enough to give reasonable results even when the process parameters were characterised...... by ones and zeroes only. These results illustrate the application of multivariate analysis as an effective strategy for improving the quality of frozen fish products. (C) 1998 Society of Chemical Industry...

  4. Materials Control System for Enriched Uranium Chemical Processing Facility for Irradiated Nuclear Materials

    International Nuclear Information System (INIS)

    Systems for management and control of nuclear material in an enriched uranium chemical processing facility are not too different from those historically used in the chemical industry. The difference is one of degree rather than substance. The monetary and strategic value of the material being processed as well as the potential health and safety hazards inherent in handling nuclear material often dictate a level of effort and system detail above that which might seem reasonable to the casual observer. Among those areas of consideration which are of particular importance in the development of an effective nuclear materials management (NMM) system as based on experience gained at the Idaho Chemical Processing Plant are the following: organizational structure, accounting system, measurement system, implementation and integration of system, records and reports, internal audit, and inventory management. (author)

  5. An Extended Algorithm of Flexibility Analysis in Chemical Engineering Processes

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    An extended algorithm of flexibility analysis with a local adjusting method for flexibility region of chemical processes, which is based on the active constraint strategy, is proposed, which fully exploits the flexibility region of the process system operation. The hyperrectangular flexibility region determined by the extended algorithm is larger than that calculated by the previous algorithms. The limitation of the proposed algorithm due to imperfect convexity and its corresponding verification measure are also discussed. Both numerical and actual chemical process examples are presented to demonstrate the effectiveness of the new algorithm.

  6. Status and direction of waste minimization in the chemical and petrochemical industries

    Energy Technology Data Exchange (ETDEWEB)

    Englande Junior, A.J. [Tulane Univ., New Orleans, LA (United States). School of Public Health and Tropical Medicine

    1993-12-31

    This paper presents an evaluation of the status and direction of toxic/hazardous waste reduction in chemical and petrochemical industries from an international perspective. In almost all cases studied savings have resulted. The importance of pollution prevention by `clean technologies` instead of remediation is stressed. 6 refs., 4 tabs.

  7. Towards consistent and reliable Dutch and international energy statistics for the chemical industry

    NARCIS (Netherlands)

    Neelis, M.L.; Pouwelse, J.W.

    2008-01-01

    Consistent and reliable energy statistics are of vital importance for proper monitoring of energy-efficiency policies. In recent studies, irregularities have been reported in the Dutch energy statistics for the chemical industry. We studied in depth the company data that form the basis of the energy

  8. An Alternative Educational Approach for an Inorganic Chemistry Laboratory Course in Industrial and Chemical Engineering

    Science.gov (United States)

    Garces, Andres; Sanchez-Barba, Luis Fernando

    2011-01-01

    We describe an alternative educational approach for an inorganic chemistry laboratory module named "Experimentation in Chemistry", which is included in Industrial Engineering and Chemical Engineering courses. The main aims of the new approach were to reduce the high levels of failure and dropout on the module and to make the content match the…

  9. Potential Challenges Faced by the U.S. Chemicals Industry under a Carbon Policy

    Directory of Open Access Journals (Sweden)

    Andrea Bassi

    2009-09-01

    Full Text Available Chemicals have become the backbone of manufacturing within industrialized economies. Being energy-intensive materials to produce, this sector is threatened by policies aimed at combating and adapting to climate change. This study examines the worst-case scenario for the U.S. chemicals industry when a medium CO2 price policy is employed. After examining possible industry responses, the study goes on to identify and provide a preliminary evaluation of potential opportunities to mitigate these impacts. If climate regulations are applied only in the United States, and no action is taken to invest in advanced low- and no-carbon technologies to mitigate the impacts of rising energy costs, the examination shows that climate policies that put a price on carbon could have substantial impacts on the competiveness of the U.S. chemicals industry over the next two decades. In the long run, there exist technologies that are available to enable the chemicals sector to achieve sufficient efficiency gains to offset and manage the additional energy costs arising from a climate policy.

  10. Physical, microscopic and chemical characterisation of industrial rye and wheat brans from the Nordic countries

    DEFF Research Database (Denmark)

    Kamal-Eldin, A; Lærke, Helle Nygaard; Bach Knudsen, Knud Erik;

    2009-01-01

    Background: Epidemiological studies show inverse relationship between intake of wholegrain cereals and several chronic diseases. Components and mechanisms behind possible protective effects of wholegrain cereals are poorly understood. Objective: To characterise commercial rye bran preparations, c...... variation in the chemical composition of industrially produced rye brans calls for the need of standardisation of this commodity, especially when used as a functional ingredient in foods....

  11. Communicating CSR and Business Identity in the Chemical Industry through Mission Slogans

    Science.gov (United States)

    Verboven, Hans

    2011-01-01

    This article analyzes the communication of corporate social responsibility (CSR) and corporate image in the chemical industry through mission slogans. Morsing's (2006) CSR communication framework is adapted for a comparative analysis of the strategies behind mission slogans. By grouping rhetorical strategies in a mission slogan into a mission…

  12. MICROSTRUCTURE DEVICES FOR APPLICATIONS IN THERMAL AND CHEMICAL PROCESS ENGINEERING

    OpenAIRE

    Brandner, Juergen; Anurjew, E.; Henning, T.; Schygulla, U.; Schubert, K.

    2006-01-01

    In this publication, an overview of the work dealing with thermal and chemical micro process engineering performed at the Institute for Micro Process Engineering (IMVT) of Forschungszentrum Karlsruhe will be given. The focus will be set on manufacturing of metallic microstructure devices and on microstructure heat exchangers. A brief outlook will describe possible future application fields.

  13. Chemical Processing Department monthly report for October 1956

    Energy Technology Data Exchange (ETDEWEB)

    1956-11-21

    The October, 1956 monthly report for the Chemical Processing Department of the Hanford Atomic Products Operation includes information regarding research and engineering efforts with respect to the Purex and Redox process technology. Also discussed is the production operation, finished product operation, power and general maintenance, financial operation, engineering and research operations, and employee operation. (MB)

  14. Chemical Changes in Carbohydrates Produced by Thermal Processing.

    Science.gov (United States)

    Hoseney, R. Carl

    1984-01-01

    Discusses chemical changes that occur in the carbohydrates found in food products when these products are subjected to thermal processing. Topics considered include browning reactions, starch found in food systems, hydrolysis of carbohydrates, extrusion cooking, processing of cookies and candies, and alterations in gums. (JN)

  15. Chemical Processing Department monthly report for September 1958

    Energy Technology Data Exchange (ETDEWEB)

    1958-10-22

    The September, 1958 monthly report for the Chemical Processing Department of the Hanford Atomic Products Operation includes information regarding research and engineering efforts with respect to the Purex and Redox process technology. Also discussed is the production operation, finished product operation, power and general maintenance, financial operation, engineering and research operations, and employee operation. (MB)

  16. Dust as interstellar catalyst I. Quantifying the chemical desorption process

    CERN Document Server

    Minissale, M; Cazaux, S; Hocuk, S

    2015-01-01

    Context. The presence of dust in the interstellar medium has profound consequences on the chemical composition of regions where stars are forming. Recent observations show that many species formed onto dust are populating the gas phase, especially in cold environments where UV and CR induced photons do not account for such processes. Aims. The aim of this paper is to understand and quantify the process that releases solid species into the gas phase, the so-called chemical desorption process, so that an explicit formula can be derived that can be included into astrochemical models. Methods. We present a collection of experimental results of more than 10 reactive systems. For each reaction, different substrates such as oxidized graphite and compact amorphous water ice are used. We derive a formula to reproduce the efficiencies of the chemical desorption process, which considers the equipartition of the energy of newly formed products, followed by classical bounce on the surface. In part II we extend these resul...

  17. Electron beam accelerator at BARC-BRIT complex - electron beam processing of materials and industrial utilization

    International Nuclear Information System (INIS)

    During the last decade, the 2MeV/20kW electron beam (EB) accelerator located at BARC-BRIT complex, Vashi has been successfully utilised for non-thermal applications to develop speciality products useful for the industry. Polymer materials are exposed to high energy electrons to induce crosslinking and degradation reactions in a number of industrial products without the use of external chemicals and additives. Various EB crosslinked products viz. PE O-rings, automotive components, automobile tyres, electrical insulations, etc have been found to be much superior in quality compared to those produced conventionally. A process has been developed to enhance colours in the polished diamonds and gem stones using EB irradiation at the facility which has attracted much attention in the Indian diamond industry as a value-addition process. Recycling of polymer waste processed under EB to produce microfine PTFE powder, to reuse in automobile industry etc. has shown good potential for the industrial use. The process feasibility both in terms of economics and technology have been amply demonstrated on a technological scale by installing special conveyors at our facility for irradiating various industrial products. Around 100 km cable insulations, 1.5 million PE O-rings and more than 40000 carats of polished diamonds have been processed in our facility over a period of time on commercial scale. Encouraged with the results, Indian private entrepreneurs have set up dedicated EB machines in some of the most significant industries producing wire and cables, electrical gadgets based on polymer composites, automobile tyres and diamonds. The products are unique in properties and are in some cases, became import substitutes. The industry is now fully geared up to adapt the technology by realising the advantages viz ease in adaptability, convenient, safe and environmental-friendly nature. Encouraged by the process demonstrations, while five EB accelerators were setup and are in operation

  18. Treatment of Municipal and Industrial Waste by Radiation Processing

    International Nuclear Information System (INIS)

    In recent years the effort in science and technology is shifting from conventional technologies preventing the pollution of air, water and soil, towards processing by gamma or by electron beam (EB) irradiation in order to prevent pollution, rather than curing the problems caused by production processes, which are not optimized with regard to pollution control. Radiation processing may help to improve the environmental situation in two aspects : It provides alternatives to conventional technologies for the cleaning of air, flue gases and water,...etc, and it also helps to realize clean processes for preventing pollution in the first place. This paper will outline the basic principles of radiation processing for waste streams of environmental relevance, will summarize the state-of -the-art in environmental applications of radiation processing to show both the advantages and the limitations of the radiation processing of waste streams, and to highlight the environmental and economic benefits of clean processes made possible by radiation processing applied to municipal and industrial waste. Reference is made to gamma and EB radiation sources, and description of new technologies is presented

  19. Aerogel-Based Insulation for High-Temperature Industrial Processes

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Owen Evans

    2011-10-13

    Under this program, Aspen Aerogels has developed an industrial insulation called Pyrogel HT, which is 4-5 times more thermally efficient than current non-aerogel technology. Derived from nanoporous silica aerogels, Pyrogel HT was specifically developed to address a high temperature capability gap not currently met with Aspen Aerogels{trademark} flagship product, Pyrogel XT. Pyrogel XT, which was originally developed on a separate DOE contract (DE-FG36-06GO16056), was primarily optimized for use in industrial steam processing systems, where application temperatures typically do not exceed 400 C. At the time, further improvements in thermal performance above 400 C could not be reasonably achieved for Pyrogel XT without significantly affecting other key material properties using the current technology. Cumulative sales of Pyrogel HT into domestic power plants should reach $125MM through 2030, eventually reaching about 10% of the total insulation market share in that space. Global energy savings would be expected to scale similarly. Over the same period, these sales would reduce domestic energy consumption by more than 65 TBtu. Upon branching out into all industrial processes in the 400 C-650 C regime, Pyrogel HT would reach annual sales levels of $150MM, with two-thirds of that being exported.

  20. Waste Reduction of Composite Film Line in Process Industries

    OpenAIRE

    Javid, Hafiz

    2015-01-01

    This research focuses on the waste reduction of polymeric material in a chemical process plant during the manufacturing of film composite line. The case the company is a manufacturing the company where continuous throughput and quality of product plays an important role for the profitability of the company. The new scheduling of maintenance and new techniques were needed to be introduced to reduce waste during the manufacturing of the product. This study is conducted as a case study, div...