WorldWideScience

Sample records for chemical petroleum refining

  1. Steam System Opportunity Assessment for the Pulp and Paper, Chemical Manufacturing, and Petroleum Refining Industries: Main Report

    Energy Technology Data Exchange (ETDEWEB)

    2002-10-01

    This report assesses steam generation and use in the pulp and paper, chemical, and petroleum refining industries, and estimates the potential for energy savings from implementation of steam system performance and efficiency improvements.

  2. Steam system opportunity assessment for the pulp and paper, chemical manufacturing, and petroleum refining industries: Main report

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2002-10-01

    This report assesses steam generation and use in the pulp and paper, chemical, and petroleum refining industries, and estimates the potential for energy savings from implementation of steam system performance and efficiency improvements.

  3. Petroleum refining and the national priorities list: The preemption of CERCLA

    International Nuclear Information System (INIS)

    Hart, D.G.

    1991-01-01

    The petroleum refining industry has preempted aspects of the implementation of CERCLA through a clause in the original legislation that makes the listing of petroleum refining sites on the NPL more difficult than it would be otherwise. The NPL, which was mandated in CERCLA, is a list of sites open-quotes where a hazardous substance has been deposited, stored, disposed of, placed, or otherwise come to be located. The petroleum exclusion clause, Section 101(14)(F) of CERCLA, states that the term hazardous substance open-quotes does not include petroleum, including crude oil or any fraction thereof which is not otherwise specifically listed or designated as a hazardous substance.close quotes This clause has been interpreted to mean that a site where petroleum products are found may not be listed on the NPL on the basis of the petroleum products; a hazardous substance that is not a normal constituent of petroleum products also must be found at the site. Regression analysis shows that the petroleum refining industry is significantly positively correlated with discovered sites (where a possibility exists that hazardous substances may be present) and significantly negatively correlated with sites that are proposed to the NPL. These, findings suggest that sites that meet the technical criteria for NPL listing are not proposed because of the petroleum exclusion clause. Although the chemical industry also produces substances that are considered hazardous, it is significantly correlated only with proposed sites, and that correlation is positive. The purpose of this paper is to present evidence suggesting that this clause was a response by Congress to an organized interest-the petroleum refining industry, which possessed a political power not available to the less-focused chemical industry

  4. Petroleum refining industry in China

    International Nuclear Information System (INIS)

    Walls, W.D.

    2010-01-01

    The oil refining industry in China has faced rapid growth in oil imports of increasingly sour grades of crude with which to satisfy growing domestic demand for a slate of lighter and cleaner finished products sold at subsidized prices. At the same time, the world petroleum refining industry has been moving from one that serves primarily local and regional markets to one that serves global markets for finished products, as world refining capacity utilization has increased. Globally, refined product markets are likely to experience continued globalization until refining investments significantly expand capacity in key demand regions. We survey the oil refining industry in China in the context of the world market for heterogeneous crude oils and growing world trade in refined petroleum products. (author)

  5. Pollution prevention in the petroleum refining industry - bibliography

    International Nuclear Information System (INIS)

    Fournier, M.

    1995-03-01

    The Great Lakes Pollution Prevention Centre has compiled a list of references to assist the petroleum refining industry in adopting pollution prevention as an important environmental management strategy. Items included were divided into 14 categories of pollution types, such as air emissions, alternative fuels, chemical substitution, grounds keeping, leaks and spills, paints, waste management plan and others

  6. Catalysts in petroleum refining and petrochemical industries 1995

    Energy Technology Data Exchange (ETDEWEB)

    Absi-Halabi, M.; Beshara, J.; Qabazard, H.; Stanislaus, A. [eds.] [Petroleum, Petrochemicals and Materials Division, Kuwait Institute of Scientific Research, Kuwait (Kuwait)

    1996-07-01

    Catalysis plays an increasingly critical role in modern petroleum refining and basic petrochemical industries. The market demands for and specifications of petroleum and petrochemical products are continuously changing. They have impacted the industry significantly over the past twenty years. Numerous new refining processes have been developed and significant improvements were made on existing technologies. Catalysts have been instrumental in enabling the industry to meet the continuous challenges posed by the market. As we enter the 21st century, new challenges for catalysis science and technology are anticipated in almost every field. Particularly, better utilization of petroleum resources and demands for cleaner transportation fuels are major items on the agenda. It is against this background that the 2nd International Conference on Catalysts in Petroleum Refining and Petrochemical Industries was organized. The papers from the conference were carefully selected from around 100 submissions. They were a mix of reviews providing an overview of selected areas, original fundamental research results, and industrial experiences. The papers in the proceedings were grouped in the following sections for quick reference: Plenary Papers; Hydroprocessing of Petroleum Residues and Distillates; Fluid Catalytic Cracking; Oxidation Catalysis; Aromatization and Polymerization Catalysis; Catalyst Characterization and Performance. The plenary papers were mostly reviews covering important topics related to the objectives of the conference. The remaining sections cover various topics of major impact on modern petroleum refining and petrochemical industries. A large number of papers dealt with hydroprocessing of petroleum distillates and residues which reflects the concern over meeting future sulfur-level specifications for diesel and fuel oils

  7. The US petroleum refining industry in the 1980's

    Energy Technology Data Exchange (ETDEWEB)

    1990-10-11

    As part of the EIA program on petroleum, The US Petroleum Refining Industry in the 1980's, presents a historical analysis of the changes that took place in the US petroleum refining industry during the 1980's. It is intended to be of interest to analysts in the petroleum industry, state and federal government officials, Congress, and the general public. The report consists of six chapters and four appendices. Included is a detailed description of the major events and factors that affected the domestic refining industry during this period. Some of the changes that took place in the 1980's are the result of events that started in the 1970's. The impact of these events on US refinery configuration, operations, economics, and company ownership are examined. 23 figs., 11 tabs.

  8. Spent solid catalysts of chemical industry and petroleum refining; Les catalyseurs solides uses de l`industrie chimique et du raffinage petrolier

    Energy Technology Data Exchange (ETDEWEB)

    Paillier, A; Briand, Y

    1997-12-31

    The aim of this work is the analysis of the heterogeneous catalysis. In a first part are given the utilizing sectors. There are mainly the petroleum refining, the chemical industry and the environment. A catalyst is chosen according to its selectivity and velocity, its cost and the wastes it induces. Thus are found three main heterogeneous catalysts series: the bulky metals, the supported metals: precious or heavy or their compounds, the zeolites and other silico-aluminates. Their most frequent uses are given. The catalysts used in the main petroleum refining processes (distillation, catalytic hydro-treatment, desulfurization, catalytic reforming, catalytic cracking, catalytic hydrocracking, alkylation) are also detailed. The second part deals with the spent solid catalysts. The reasons of the deactivation (poisons or contaminants, structure modification) are given. The spent catalysts are either regenerated or eliminated. The regeneration methods are described. The solid catalysts cannot be stored without being stabilized (decrease of its water permeability and of its leachable fraction). The stabilization methods are reviewed. The regulations on the spent solid catalysts are given in the last part. (O.M.)

  9. Spent solid catalysts of chemical industry and petroleum refining; Les catalyseurs solides uses de l`industrie chimique et du raffinage petrolier

    Energy Technology Data Exchange (ETDEWEB)

    Paillier, A.; Briand, Y.

    1996-12-31

    The aim of this work is the analysis of the heterogeneous catalysis. In a first part are given the utilizing sectors. There are mainly the petroleum refining, the chemical industry and the environment. A catalyst is chosen according to its selectivity and velocity, its cost and the wastes it induces. Thus are found three main heterogeneous catalysts series: the bulky metals, the supported metals: precious or heavy or their compounds, the zeolites and other silico-aluminates. Their most frequent uses are given. The catalysts used in the main petroleum refining processes (distillation, catalytic hydro-treatment, desulfurization, catalytic reforming, catalytic cracking, catalytic hydrocracking, alkylation) are also detailed. The second part deals with the spent solid catalysts. The reasons of the deactivation (poisons or contaminants, structure modification) are given. The spent catalysts are either regenerated or eliminated. The regeneration methods are described. The solid catalysts cannot be stored without being stabilized (decrease of its water permeability and of its leachable fraction). The stabilization methods are reviewed. The regulations on the spent solid catalysts are given in the last part. (O.M.)

  10. The petroleum refining industry and the implications for the environment

    International Nuclear Information System (INIS)

    Saraiva, Gerardo Jose de Pontes

    2000-01-01

    The petroleum refining industry is basically concerned with the production of oil, lubricants and intermediate petrochemical products, utilizing crude oil as its main raw material. Petroleum refining, a distillation process that breaks hydrocarbons into fractions, eliminating undesired impurities, generates irreducible residues. Until the industrial revolution, the residues were essentially organic, susceptible to the attack of agents of destruction and transformation (bacterium, fungi, etc). Suddenly, due to the intensification of human activities of modern man, nature scattered across the planet more resistant products, many of them with long life times, that produce a deeper impact in the environment. Almost entirely marine is the pollution that results from increasing quantity of hydrocarbons dumped into the sea, a problem that is aggravated by the development of manufacturing and transportation of petroleum products. The expansion of the petroleum commerce, using essentially maritime transportation, has increased considerably the probability of accidents increasing the risks of environment pollution. This work presents suggestions and possible solutions to minimize the problem of environment pollution, caused by refining and transportation of this combustible, essential to present time industry. (author)

  11. Production and refining. Increase of Chinese petroleum imports

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    China produced 156.5 Mt of petroleum in 1996, from which 56 Mt were extracted from the Daqing oil field, exploited since 1960. About 10% of the crude oil comes from offshore fields. Over the 100 Mt refined in 1996, 20 Mt were imported. The Chinese petroleum products demand should increase to 200 Mt/y by the end of the century with respect to 150 Mt/y in 1997. The Dalian refinery, the first Chinese-foreign joint venture, started to work in November 1996 and should reached its full capacity of 100000 b/day in the first quarter of 1997. The Chinese refining activity has now an excess capacity of 206 Mt/y. Several other joint venture projects in petrochemistry are planned in China. Short paper. (J.S.)

  12. Energy conservation potential in China’s petroleum refining industry: Evidence and policy implications

    International Nuclear Information System (INIS)

    Lin, Boqiang; Xie, Xuan

    2015-01-01

    Highlights: • A long-term equilibrium relationship of energy demand in China’s petroleum refining industry is established. • The sectoral energy conservation potential is evaluated by using scenarios analysis. • Energy prices, enterprise scale, R and D investment and ownership structure affect electricity intensity. • Future policy for energy conservation in China’s petroleum refining industry is suggested. - Abstract: China is currently the second largest petroleum refining country in the world due to rapid growth in recent years. Because the petroleum refining industry is energy-intensive, the rapid growth in petroleum refining and development caused massive energy consumption. China’s urbanization process will guarantee sustained growth of the industry for a long time. Therefore, it is necessary to study the energy conservation potential of the petroleum industry. This paper estimates the energy conservation potential of the industry by applying a cointegration model to investigate the long-run equilibrium relationship between energy consumption and some factors such as energy price, enterprise scale, R and D investment and ownership structure. The results show that R and D investment has the greatest reduction impact on energy intensity, and the growth of market participants (i.e. the decline of the share of state-owned companies) can improve energy efficiency of this industry. Under the advanced energy-saving scenario, the accumulated energy conservation potential will reach 230.18 million tons of coal equivalent (tce). Finally, we provide some targeted policy recommendations for industrial energy conservation

  13. Identification of key oil refining technologies for China National Petroleum Co. (CNPC)

    International Nuclear Information System (INIS)

    Liu Haiyan; Yu Jianning; Xu Jian; Fan Yu; Bao Xiaojun

    2007-01-01

    This paper summarizes the results from the project 'Vision of the Key Petroleum Refining Technologies for China National Petroleum Co. (CNPC) in the Early 21st Century' undertaken by the Department of R and D Administration, CNPC, and its affiliate key laboratory, The Key Laboratory of Catalysis operated by China University of Petroleum, Beijing. The objective of the project was to identify the challenges and opportunities of CNPC's petroleum refining business given increasing economy globalization and stricter environmental regulations. Using the modified Delphi method, four key technologies for CNPC's oil refining industry were identified. They are: integrated fluid catalytic cracking (FCC), hydroprocessing, residue hydrocracking, and high-grade lubricant production. The most significant technology will be the integrated FCC technology that can economically increase the yield of light fractions as well as upgrade transportation fuels. In China, FCC units produce about 80% and 30% commercial gasoline and diesel, respectively. To ensure compliance with future environmental legislation, hydroprocessing technologies, including those related to petroleum product hydrorefining and distillate hydrocracking, should be developed. By combining residue hydrocracking and FCC technologies, poorer quality residua can be processed. Supplying high-grade lube oils is one of the main tasks for CNPC's oil refining industry. Development of hydrodewaxing technologies to manufacture API group II/III base oil is the main direction for CNPC's lubricant production business

  14. The economic impact of taxes on refined petroleum products in the Philippines

    International Nuclear Information System (INIS)

    Boyd, R.; Uri, N.D.

    1993-01-01

    This paper uses an aggregate modelling approach to assess the impact of taxes on refined petroleum products on the Philippine economy. The effects of removing the 48% tax on premium and regular gasoline and the 24% tax on other refined petroleum products on prices and quantities are examined. For example, the consequences of a complete elimination of refined petroleum product taxes would be an increase in output by all producing sectors of about 3.7% or about 2.65 hundred billion Philippine pesos, a rise in the consumption of goods and services by about 13.6% or 4.2 hundred billion Philippine pesos, a rise in lower tax revenue for the government of 62.4% or 2.8 hundred billion Philippine pesos. When subjected to sensitivity analyses, the results are reasonably robust. (author)

  15. Comprehensive Data Collected from the Petroleum Refining Sector

    Science.gov (United States)

    On April 1, 2011 EPA sent a comprehensive industry-wide information collection request (ICR) to all facilities in the U.S. petroleum refining industry. EPA has received this ICR data and compiled these data into databases and spreadsheets for the web

  16. Processing (refining) of petroleum and natural gases. Pererabotka neftyanykh i prirodnykh gazov

    Energy Technology Data Exchange (ETDEWEB)

    Berlin, M A; Gorechenkov, V G; Volkov, N P

    1981-01-01

    A discussion is made of the theoretical principles underlying the processes involved in the processing of natural and petroleum gases and gas condensate. Information is given on apparatus, engineering systems, and machine methods for the designing of gas refining plants. The book is intended for engineers and operation personnel of gas refining plants, and might also be useful to senior undergraduates at chemistry and petroleum institutes of higher learning. 278 references, 54 tables.

  17. The Development of Petroleum Refining in the World Market Dimensions of Sustainable Development

    Directory of Open Access Journals (Sweden)

    Alexey S. Shapran

    2015-11-01

    Full Text Available The development of petroleum refining in the world market dimensions of sustainable development investigated by the author's interpretation of the OECD model "pressure – state – response", where the pressure parameters proposed use – CO2 emissions, the state parameters – indicators of output and foreign trade refining sector; indicators to community response – (GDP eco-intensity. On the basis of economic and mathematical modeling performed of the adaptation and their value for use in the model parameters, performed a quantitative assessment of the relationship between the key requirements for sustainable development and development of the world petroleum refining market. This approach gave to perform a quantitative assessment of the level and impact of individual factors on the development of world petroleum market in countries with different technological structures.

  18. World petroleum refining capacity: Present and forecasted situation

    International Nuclear Information System (INIS)

    Tabarelli, D.

    1991-01-01

    World petroleum demand is expected to increase from about 15 million barrels to 80 million after the year 2000. The resulting necessity to increase the currently over-extended global refining capacity will put a significant burden on financial resources within the industry. This article examines the developments, after a decade of restructuring, which have led to the present situation of the petroleum industry described as having greatly improved operational conditions but beset by worrisome problems with regard not only to capacity, but also to the costly constraints being imposed by new air pollution regulations, especially those relevant to desulfurization in refinery processes

  19. CITGO Petroleum Corporation and PDV Midwest Refining, LLC Settlement

    Science.gov (United States)

    CITGO Petroleum Corporation and PDV Midwest Refining, LLC (collectively, CITGO) have agreed to pay a $1,955,000 civil penalty, perform environmental projects totaling more than $2 million, and spend an estimated $42 million in injunctive relief to resolve.

  20. Control and Prevention of Wastewater Pollution From Amerya Petroleum Refining Company

    International Nuclear Information System (INIS)

    Bakry, A.A.

    2004-01-01

    An oil refinery normally uses large quantities of water, for cooling and other process purpose. This water is treated from contaminants and finally returned to a lake or sea, outside the refinery. Amerya Petroleum Refining Company (APRC) uses conventional and special treatment methods for wastewater to remove all pollutants and to reduce the oil content in refinery final effluent water to a limit of 10 ppm , as the maximum permissible limit for environmental protection as designated by the Egyptian Act No.4 for the year 1994 . About 80% of oil in wastewater is separated by API (American Petroleum Institute) separator method and returned to refinery. Small oil droplets, emulsion and suspended matter escaped from API separator but were removed successfully in the dissolved air flotation (DAF) with chemical additives as the secondary treatment stage for wastewater. The flotation method with chemical additives and filtration were used to reduce the suspended solids and oil content to permissible levels (10 ppm) Furthermore, biological treatment unit was constructed to remove the dissolved oxygen consuming contaminates, e.g. phenolic compounds and traces of hydrocarbon derivatives. It was found that the BOD and COD of the effluent were reduced, and 100% removal of the trace amount of phenol was achieved in effluent

  1. Chemical and physical aspects of refining coal liquids

    Science.gov (United States)

    Shah, Y. T.; Stiegel, G. J.; Krishnamurthy, S.

    1981-02-01

    Increasing costs and declining reserves of petroleum are forcing oil importing countries to develop alternate energy sources. The direct liquefaction of coal is currently being investigated as a viable means of producing substitute liquid fuels. The coal liquids derived from such processes are typically high in nitrogen, oxygen and sulfur besides having a high aromatic and metals content. It is therefore envisaged that modifications to existing petroleum refining technology will be necessary in order to economically upgrade coal liquids. In this review, compositional data for various coal liquids are presented and compared with those for petroleum fuels. Studies reported on the stability of coal liquids are discussed. The feasibility of processing blends of coal liquids with petroleum feedstocks in existing refineries is evaluated. The chemistry of hydroprocessing is discussed through kinetic and mechanistic studies using compounds which are commonly detected in coal liquids. The pros and cons of using conventional petroleum refining catalysts for upgrading coal liquids are discussed.

  2. BioDegradation of Refined Petroleum Hydrocarbons in Soil | Obire ...

    African Journals Online (AJOL)

    Carbon-dioxide production and hydrocarbon degradation of refined petroleum hydrocarbon in soils treated with 5% gasoline, kerosene and diesel oil were investigated. Soil for study was bulked from around a car park in Port Harcourt. Soil samples were collected at weekly intervals for four weeks and subsequently at ...

  3. Improvement of hydrodenitrogenation (HDN) in co-refining of coal-derived liquid and petroleum fraction

    Energy Technology Data Exchange (ETDEWEB)

    Machida, M.; Ono, S. [Idemitsu Kosan Co. Ltd., Tokyo (Japan); Hattori, H. [Hokkaido University, Sapporo (Japan). Center for Advanced Research of Energy Technology

    1997-09-01

    The improvement in hydrodenitrogenation (HDN) of coal-derived liquids by co-refining with a petroleum fraction results principally from lowering the nitrogen content of the feedstock (coal-derived liquid) by blending with a nitrogen-free petroleum fraction. Effects of different fractions of coal-derived liquids on HDN and hydrodeoxygenation (HDO) were also examined. The HDN improvement by co-refining could be interpreted in terms of Langmuir-Hinshelwood mechanism. 38 refs., 3 figs., 3 tabs.

  4. Fundamentals of Petroleum.

    Science.gov (United States)

    Bureau of Naval Personnel, Washington, DC.

    Basic information on petroleum is presented in this book prepared for naval logistics officers. Petroleum in national defense is discussed in connection with consumption statistics, productive capacity, world's resources, and steps in logistics. Chemical and geological analyses are made in efforts to familiarize methods of refining, measuring,…

  5. Energy and Environmental Profile of the U.S. Petroleum Refining Industry

    Energy Technology Data Exchange (ETDEWEB)

    Pellegrino, Joan [Energetics, Inc., Columbia, MD (United States); Brueske, Sabine [Energetics, Inc., Columbia, MD (United States); Carole, Tracy [Energetics, Inc., Columbia, MD (United States); Andres, Howard [Energetics, Inc., Columbia, MD (United States)

    2007-11-01

    This 2007 report provides an overview of the U.S. petroleum refining industry, including new data on market trends and energy and material consumption, as well as information on environmental performance.

  6. The demand for refined petroleum products in Iran: Estimation and projection

    International Nuclear Information System (INIS)

    Kianian, A.M.

    1990-01-01

    The estimation and projection of the demand for refined petroleum products of the OPEC states, are important for the world petroleum market from both the demand and supply sides. In this context, this study forms an econometric model to estimte the demand for the total and four major refined petroleum products (RPPs) in Iran and project their future trends into the year 2000. The fact that Iran has the largest domestic demand for RPPs among all the OPEC members has motivated some research primarily to study the structure of the demand for such products. None, however, has utilized econometric models to estimate or project the demand for RPPs. The first section of this study discusses the structure of the Iranian energy market. Next, the demand functions for gasoline, kerosine, gas oil, fuel oil, and the total RPPs in Iran are estimated. The third section puts together the demand functions to form a model used to project the demand for RPPs up to the year 2000 under an historical scenario. Finally, some condlusions are offered. 7 tabs

  7. 40 CFR 268.35 - Waste specific prohibitions-petroleum refining wastes.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Waste specific prohibitions-petroleum refining wastes. 268.35 Section 268.35 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... generator may use knowledge of the waste. If the waste contains constituents in excess of the applicable...

  8. Air Quality Impacts of Petroleum Refining and Petrochemical Industries

    Directory of Open Access Journals (Sweden)

    Aiswarya Ragothaman

    2017-09-01

    Full Text Available Though refineries and petrochemical industries meet society’s energy demands and produce a range of useful chemicals, they can also affect air quality. The World Health Organization (WHO has identified polluted air as the single largest environmental risk, and hence it is necessary to strive for and maintain good air quality. To manage potential health impacts, it is important to implement proper air quality management by understanding the link between specific pollutant sources and resulting population exposures. These industries release pollutants such as Volatile Organic Compounds, greenhouse gases and particulate matter, from various parts of their operations. Air quality should be monitored and controlled more meticulously in developing nations where increased energy demands, industrialization and overpopulation has led to more emissions and lower air quality. This paper presents a review of findings and highlights from various studies on air quality impacts of petroleum refining and petrochemical plants in many regions in the world.

  9. Evaluation of the acute toxicity of refined petroleum products against ...

    African Journals Online (AJOL)

    Static and static-renewal evaluation of the acute toxicity of three refined petroleum products — petrol, kerosene and diesel — against two freshwater animals, the mollusc Pila ovata and the fish Poecilia reticulata, was conducted in the laboratory. Petrol, kerosene and diesel were found to be moderately toxic to the test ...

  10. Desulfurization of waste gases of the incinerator after petroleum refining

    International Nuclear Information System (INIS)

    Samesova, D.; Ladomersky, J.

    2001-01-01

    Desulfurization of waste gases of the incinerator after petroleum refining was developed. Mixing of wastes with lime (10% of additive of total volume of waste) was proved before introduction into incinerator. Concentrations of CO, CO 2 , O 2 , NO 2 , SO 2 and temperature of combustion products were measured by automatic analyser

  11. Canadian retail petroleum markets study : a review of competitiveness in the Canadian refined petroleum marketing industry

    International Nuclear Information System (INIS)

    Ervin, M.J.

    1997-01-01

    A retail petroleum market study was conducted to provide a comprehensive overview of the competitiveness of the downstream petroleum industry in Canada, as well as to provide a foundation for effective policy development. A model which illustrates the interrelationships between the many stakeholders who receive revenue from the sale of gasoline was presented. It was shown that although there has been an upward trend in world crude prices since 1991, both refiners and marketers have experienced a decline in margins due to price competition at the rack and at the retail pump. Government intervention into petroleum marketing was considered to be of questionable value and a poor alternative to market-based regulation. In this study, 19 markets representing a broad range of conditions, were chosen for a detailed review of outlet economics. Market-by-market and regional comparisons of key competitiveness indicators were reviewed and discussed. Improving public understanding and awareness of competition in the petroleum marketing sector and developing cooperative industry research into marketing sector competitive issues were recommended. 7 refs., 15 tabs., 37 figs

  12. Application of the exergy concept in the petroleum refining and petrochemical industry

    Energy Technology Data Exchange (ETDEWEB)

    Rivero, Ricardo [Instituto Mexicano del Petroleo, Grupo de Exergia, Mexico City (Mexico)

    2002-08-01

    In this paper, the past, present and future applications of the exergy concept in applied process research, development and engineering projects in the petroleum refining and petrochemical industry, conducted at the Mexican Petroleum Institute (IMP), are described. These applications are the result of a clear recognition of the challenge represented by the reduction of energy degradation, i.e. the application of the second law of thermodynamics, through the exergy concept, which allows to simultaneously consider the three E's model: energy-economy-ecology. Applications can be grouped in two complementary directions: the first, methodological, direction consists in integrating within general simulation, analysis and optimization programs, the subroutines required to conduct exergy analyses, in order to get a quick and precise manner, all information required to integrally optimize chemical processes through detailed exergoeconomic and exergoecologic studies. The second direction refers to research and technological development of specific systems and processes, integrally optimum, of which the justification lies on the exergy analysis, i.e. on its capacity to simultaneously consider energy, economy and ecology aspects, such as diabatic distillation, absorption heat pumps, coking-gasification-combined cycle co- and tri-generation, fuel cells, etc. (Author)

  13. Petroleum refining and air quality

    International Nuclear Information System (INIS)

    Raimbault, C.

    1992-01-01

    This paper studies the methods which may be developed in petroleum refineries or during petroleum products using for air pollution abatement: petroleum products desulfurization, lead elimination in gasoline and catalytic converters to reduce sulfur dioxide and nitrogen oxides in exhaust gases. Investments and costs estimation to adapt petroleum refineries for environment protection is also given. 1 ref., 6 figs., 6 tabs

  14. Petroleum refining. Separation processes; Le raffinage du petrole. Procedes de separation

    Energy Technology Data Exchange (ETDEWEB)

    Wauquier, J.P. [Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France); Bonfils, P. [AB Industries (France); Company, J.P. [Compagnie de Raffinage et de Distribution TOTAL France, 75 - Paris (France); Deschamps, A. [Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France); Gourlia, J.P. [Elf Aquitaine (France); Gouzien, L. [Compagnie de Raffinage et de Distribution TOTAL France, 75 - Paris (France); Hombourger, T. [Mobil (France); Jullian, S. [Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France); Marty, C. [Compagnie de Raffinage et de Distribution TOTAL France, 75 - Paris (France); Mikitenko, P. [Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France); Ptak, C. [Technip, 92 - Rueil-Malmaison (France); Rojey, A.; Streicher, C.; Vidal, J. [Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France)

    1998-12-01

    After having given into details the conventional separation processes used in petroleum refining, the author describes the development future prospects: improvement of the existing technologies, introduction of new techniques or separation processes still not used today in this industry. This book is particularly devoted to students and to engineers and technical men who work in refineries. (O.M.) 308 refs.

  15. Petroleum refining. 5, refinery operation and management; Le raffinage du petrole. 5. Exploitation et gestion de la raffinerie

    Energy Technology Data Exchange (ETDEWEB)

    Favennec, J.P. (ed.)

    2001-07-01

    In this volume, the reader will find: an analysis of the refining industry's current environment and economics, including the importance of crude oil, the demand for petroleum products, markets and price setting mechanisms for crude oil and oil products, refining costs and margins, the evolution of the refining capacity and of constraints on the industry; a review of the tools available for optimising and controlling operations; an explanation of material balance management and a description of refinery management and organisation. Contents: I. Background to refining. 1. Oil and Energy. 2. Petroleum products applications, characteristics, markets. 3. International oil markets. 4. Refining: a technical summary investments, margins, costs probable future developments. II. Refining tools. 5. Introduction to linear programming as used in the refining industry. 6. Application of linear programming to refining. 7. Automation, process control and information technology. 8. Applications and their implementation. III. Management and organisation. 9. Management and optimisation of refinery operations. 10. Logistics: transport and dispatch. 11. Functional and organisational analysis. 12. Managerial aspects. Glossary. Index. (author)

  16. Petroleum marketing monthly

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  17. Petroleum marketing monthly

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    Petroleum Marketing Monthly (PPM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o. b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  18. Petroleum marketing monthly

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  19. Petroleum marketing monthly

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data.

  20. Identification of refined petroleum products in contaminated soils using an identification index for GC chromatograms.

    Science.gov (United States)

    Kwon, Dongwook; Ko, Myoung-Soo; Yang, Jung-Seok; Kwon, Man Jae; Lee, Seung-Woo; Lee, Seunghak

    2015-08-01

    Hydrocarbons found in the environment are typically characterized by gas chromatography (GC). The shape of the GC chromatogram has been used to identify the source of petroleum contamination. However, the conventional practice of simply comparing the peak patterns of source products to those of environmental samples is dependent on the subjective decisions of individual analysts. We have developed and verified a quantitative analytical method for interpreting GC chromatograms to distinguish refined petroleum products in contaminated soils. We found that chromatograms for gasoline, kerosene, and diesel could be divided into three ranges with boundaries at C6, C8, C16, and C26. In addition, the relative peak area (RPA(GC)) of each range, a dimensionless ratio of the peak area within each range to that of the total range (C6-C26), had a unique value for each petroleum product. An identification index for GC chromatograms (ID(GC)), defined as the ratio of RPA(GC) of C8-C16 to that of C16-C26, was able to identify diesel and kerosene sources in samples extracted from artificially contaminated soils even after weathering. Thus, the ID(GC) can be used to effectively distinguish between refined petroleum products in contaminated soils.

  1. An evaluation of the effects of the tax on refined petroleum products in the Philippines

    International Nuclear Information System (INIS)

    Uri, N.D.; Boyd, R.

    1993-01-01

    This paper uses an aggregate modelling approach to assess the effect of taxes on refined petroleum products on the Philippine economy. The approach used in the analysis consists of a general equilibrium model comprising 14 producing sectors, 14 consuming sectors, 3 household categories classified by income and government. The effects of removing the 48% tax on premium and regular gasoline and the 24% tax on other refined petroleum products on prices and quantities are examined. The results are revealing. For example, the consequences of a complete elimination of refined petroleum product taxes would be an increase in output by all producing sectors of about 3.7% or about 2.65 hundred billion Philippine pesos, a rise in the consumption of goods and services by about 13.6% or 4.2 hundred billion Philippine pesos, a rise in total utility by 14.3% or 4.5 hundred billion Philippine pesos and lower tax revenue for the government of 62.4% or 2.8 hundred billion Philippine pesos. When subjected to a sensitivity analysis, the results are reasonably robust with regard to the assumption of the values of the substitution elasticities. That is, while the model's equilibrium values do vary in response to different assumptions of the values of these elasticities, the fluctuations are not so enormous to suggest that the model is unrealistically sensitive to these parameters. (Author)

  2. Carcinogenicity of petroleum lubricating oil distillates: effects of solvent refining, hydroprocessing, and blending.

    Science.gov (United States)

    Halder, C A; Warne, T M; Little, R Q; Garvin, P J

    1984-01-01

    Certain refining processes were investigated to determine their influence on the dermal carcinogenic activity of petroleum-derived lubricating oil distillates. Specifically, the effects of solvent refining, hydroprocessing, a combination of both processes, and the blending of oils processed using each technique were evaluated in standard mouse skin-painting bioassays. The refining process used as well as the level or severity of treatment greatly influenced the carcinogenic outcome of processed lubricating oils. Solvent refining at severities normally used appeared to eliminate carcinogenicity. In contrast, hydroprocessing alone at mild levels of treatment was successful only in reducing the carcinogenic potency; severe hydroprocessing conditions were necessary to eliminate carcinogenic activity without the use of additional refining processes. Carcinogenic activity could also be eliminated by following moderate solvent refining with mild hydroprocessing. Blending of hydroprocessed oils with solvent-refined oils resulted in a substantial reduction or even elimination of carcinogenic activity. However, the degree of protection obtained varied with the particular distillates used and appeared largely dependent on the inherent biological activity of the hydroprocessed oil.

  3. Assessment of the impact of the tax on refined petroleum products in the Philippines

    International Nuclear Information System (INIS)

    Uri, N.D.; Boyd, R.

    1993-01-01

    This paper uses an aggregate modelling approach to assess the impact of taxes on refined-petroleum products on the Philippine's economy. The approach used in the analysis consists of a general equilibrium model composed of 14 producing sectors, 14 consuming sectors, three household categories classified by income, and a government. The effects of removing the 48% tax on premium and regular gasoline and the 24% tax on other refined petroleum products on prices and quantities are examined. The results are revealing. For example, the consequences of a complete elimination of refined petroleum product taxes would be an increase in output by all producing sectors of about 3.7% or about 2.65 hundred billion (2.65 x 10 11 ) Philippine pesos, a rise in the consumption of goods and services by about 13.6% or 4.2 hundred billion (4.2 x 10 11 ) Philippine pesos, a rise in total utility by 14.3% or 4.5 hundred billion (4.5 x 10 11 ) Philippine pesos and a lower tax revenue for the government of 62.4% and 2.8 hundred billion (2.8 x 10 11 ) Philippine pesos. When subjected to a sensitivity analysis, the results are reasonably robust with regard to the assumption of the values of the substitution elasticities. That is, while the model's equilibrium values do vary in response to different assumptions of the values of these elasticities, the fluctuations are not so large as to suggest that the model is unrealistically sensitive to these parameters. (Author)

  4. Petroleum marketing monthly, July 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  5. Petroleum marketing annual 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-24

    The Petroleum Marketing Annual (PMA) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysis, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the fob and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Annual. For this production, all estimates have been recalculated since their earlier publication in the Petroleum Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication date.

  6. Petroleum marketing annual 1994

    International Nuclear Information System (INIS)

    1995-01-01

    The Petroleum Marketing Annual (PMA) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysis, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the fob and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Annual. For this production, all estimates have been recalculated since their earlier publication in the Petroleum Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication date

  7. U.S. petroleum refining: Meeting requirements for cleaner fuels and refineries

    International Nuclear Information System (INIS)

    Warden, R.B.

    1993-01-01

    A review is presented of a study carried out by the National Petroleum Council that assessed the ability of the U.S. oil industry to manufacture and supply the quantity and quality of products required in the 1990s and beyond. The competitiveness of domestic supply vs product imports was analyzed and the investment requirements and other costs associated with meeting new environmental legislation and regulations on petroleum products and refineries were addressed. In particular, the requirements of the 1990 Clean Air Act Amendments and other environmental, health, and safety initiatives, both current and prospective, were evaluated. Refineries and the logistics system were studied but not crude oil supply or service stations. The costs of stationary source health, safety and environmental regulations and requirements were evaluated for the years 1995, 2000 and 2010, and sources of U.S. light products and U.S. refinery utilization were modelled for these years. Three demand scenarios were considered: growth, no-growth, and decline. Annual expenditures for health, safety and environment programs inside refineries are expected to double in the 1990s. Expenditures of $106 billion are projected over the period 1990-2010 for new facilities and programs necessary for current and anticipated stationary source regulations. Refining and logistics costs will increase substantially. Other conclusions related to capital expenditures, refining capability, product compatibility, oxygenates and foreign product supply cost are drawn. 26 figs

  8. Petroleum marketing monthly, August 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-15

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product Sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  9. Petroleum marketing monthly, September 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum product sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  10. Grouping of Petroleum Substances as Example UVCBs by Ion Mobility-Mass Spectrometry to Enable Chemical Composition-Based Read-Across.

    Science.gov (United States)

    Grimm, Fabian A; Russell, William K; Luo, Yu-Syuan; Iwata, Yasuhiro; Chiu, Weihsueh A; Roy, Tim; Boogaard, Peter J; Ketelslegers, Hans B; Rusyn, Ivan

    2017-06-20

    Substances of Unknown or Variable composition, Complex reaction products, and Biological materials (UVCBs), including many refined petroleum products, present a major challenge in regulatory submissions under the EU Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) and US High Production Volume regulatory regimes. The inherent complexity of these substances, as well as variability in composition obfuscates detailed chemical characterization of each individual substance and their grouping for human and environmental health evaluation through read-across. In this study, we applied ion mobility mass spectrometry in conjunction with cheminformatics-based data integration and visualization to derive substance-specific signatures based on the distribution and abundance of various heteroatom classes. We used petroleum substances from four petroleum substance manufacturing streams and evaluated their chemical composition similarity based on high-dimensional substance-specific quantitative parameters including m/z distribution, drift time, carbon number range, and associated double bond equivalents and hydrogen-to-carbon ratios. Data integration and visualization revealed group-specific similarities for petroleum substances. Observed differences within a product group were indicative of batch- or manufacturer-dependent variation. We demonstrate how high-resolution analytical chemistry approaches can be used effectively to support categorization of UVCBs based on their heteroatom composition and how such data can be used in regulatory decision-making.

  11. Petroleum marketing monthly, June 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in five sections: Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. The feature article is entitled ``The Second Oxygenated Gasoline Season.`` 7 figs., 50 tabs.

  12. EFFECT OF REFINED PETROLEUM PRODUCTS CONTAMINATION ON BACTERIAL POPULATION AND PHYSICOCHEMICAL CHARACTERISTICS OF CULTIVATED AGRICULTURAL SOIL

    Directory of Open Access Journals (Sweden)

    Adewale Sogo Olalemi

    2012-10-01

    Full Text Available An investigation into the effect of refined petroleum products contamination on bacterial population and physicochemical characteristics of cultivated agricultural soil was carried out. The soil samples obtained from the Teaching and Research Farm, Obakekere, Federal University of Technology, Akure, Ondo State were contaminated with varying volumes of petrol, diesel and kerosene. The results revealed higher bacterial populations in uncontaminated soils than contaminated soils. The counts of bacteria ranged from 3.0 × 105 to 5.0 × 105 cfu/g in uncontaminated soils and 1.0 × 105 to 3.0 × 105 cfu/g in contaminated soils. The isolated bacteria were identified as Bacillus subtilis, Flavobacterium lutescens, Micrococcus luteus, Corynebacterium variabilis, Pseudomonas fluorescens. The contamination had no significant effect on pH, potassium, sodium, organic carbon and nitrogen content of the soils, while the moisture, calcium, phosphorus and magnesium content of the contaminated soils were significantly different (P < 0.05 compared with the uncontaminated soils. The ability of Bacillus subtilis, Flavobacterium lutescens, Micrococcus luteus, and Pseudomonas fluorescens to utilize the refined petroleum products suggest that these bacteria had potential to bioremediate petroleum contaminated soils.

  13. Assessment of Energy Efficiency Improvement in the United States Petroleum Refining Industry

    Energy Technology Data Exchange (ETDEWEB)

    Morrow, William R. [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Marano, John [JM Energy Consulting, Inc.; Sathaye, Jayant [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Hasanbeigi, Ali [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Xu, Tengfang [Ernest Orlando Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)

    2013-02-01

    Adoption of efficient process technologies is an important approach to reducing CO2 emissions, in particular those associated with combustion. In many cases, implementing energy efficiency measures is among the most cost-effective approaches that any refiner can take, improving productivity while reducing emissions. Therefore, careful analysis of the options and costs associated with efficiency measures is required to establish sound carbon policies addressing global climate change, and is the primary focus of LBNL’s current petroleum refining sector analysis for the U.S. Environmental Protection Agency. The analysis is aimed at identifying energy efficiency-related measures and developing energy abatement supply curves and CO2 emissions reduction potential for the U.S. refining industry. A refinery model has been developed for this purpose that is a notional aggregation of the U.S. petroleum refining sector. It consists of twelve processing units and account s for the additional energy requirements from steam generation, hydrogen production and water utilities required by each of the twelve processing units. The model is carbon and energy balanced such that crud e oil inputs and major refinery sector outputs (fuels) are benchmarked to 2010 data. Estimates of the current penetration for the identified energy efficiency measures benchmark the energy requirements to those reported in U.S. DOE 2010 data. The remaining energy efficiency potential for each of the measures is estimated and compared to U.S. DOE fuel prices resulting in estimates of cost- effective energy efficiency opportunities for each of the twelve major processes. A combined cost of conserved energy supply curve is also presented along with the CO2 emissions abatement opportunities that exist in the U.S. petroleum refinery sector. Roughly 1,200 PJ per year of primary fuels savings and close to 500 GWh per y ear of electricity savings are potentially cost

  14. Petroleum marketing monthly, March 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-10

    This report for March 1995, provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly. A glossary is included.

  15. Petroleum industry 1996

    International Nuclear Information System (INIS)

    1997-01-01

    A survey on petroleum industry activities in France and in the world in 1996 is presented. The different parts and themes of the study are: evolution of the petroleum market (international and French markets, supply and demand, prices, mark-up and taxation in France and in Europe); activities in the petroleum industries (exploration and production, maritime transportation, inland transportation and storage, refining, quality of petroleum products and substitution fuels, oil distribution); environment and safety (refining, distribution and evolution of products, pipeline and maritime transportation, exploration and production); situation of the sector's companies (oil groups, para-petroleum French industry, scientific and technical research)

  16. Industry of petroleum and its by-products

    International Nuclear Information System (INIS)

    Haddad, Antoine

    1989-01-01

    A comprehensive study of petroleum industry and its by-products is presented. Petroleum, since its origin and all steps of its industry including its detection, production and transportation is described. A historical description of the production and formation of fuels under the ground strates through million of years, as well as its chemical composition are presented. A full description of refining petrol and all by-products derived is given. Pictures and tables enhance the explanation

  17. Petroleum marketing monthly, December 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-05

    This publication provides information and statistical data on a variety of crude oils and refined petroleum products. It presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include domestic first purchase price, f.o.b. and landed cost of imported crude, and refiners` acquisition cost of crude. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane.

  18. Petroleum marketing annual, 1990

    International Nuclear Information System (INIS)

    1991-01-01

    The Petroleum Marketing Annual contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. (VC)

  19. Petroleum marketing monthly, November 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-09

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed costs of imported crude oil, and the refiner`s acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  20. Petroleum marketing monthly, February 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-25

    The Petroleum Marketing Monthly is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiner`s acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  1. Petroleum marketing monthly, March 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-22

    The Petroleum Marketing Monthly is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, education institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiner`s acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  2. Environmental hazard and risk characterisation of petroleum substances: a guided "walking tour" of petroleum hydrocarbons.

    Science.gov (United States)

    Bierkens, Johan; Geerts, Lieve

    2014-05-01

    Petroleum substances are used in large quantities, primarily as fuels. They are complex mixtures whose major constituents are hydrocarbons derived from crude oil by distillation and fractionation. Determining the complete molecular composition of petroleum and its refined products is not feasible with current analytical techniques because of the huge number of molecular components. This complex nature of petroleum products, with their varied number of constituents, all of them exhibiting different fate and effect characteristics, merits a dedicated hazard and risk assessment approach. From a regulatory perspective they pose a great challenge in a number of REACH processes, in particular in the context of dossier and substance evaluation but also for priority setting activities. In order to facilitate the performance of hazard and risk assessment for petroleum substances the European oil company association, CONCAWE, has developed the PETROTOX and PETRORISK spreadsheet models. Since the exact composition of many petroleum products is not known, an underlying assumption of the PETROTOX and PETRORISK tools is that the behaviour and fate of a total petroleum substance can be simulated based on the physical-chemical properties of representative structures mapped to hydrocarbon blocks (HBs) and on the relative share of each HB in the total mass of the product. To assess how differing chemical compositions affect the simulated chemical fate and toxicity of hydrocarbon mixtures, a series of model simulations were run using an artificial petroleum substance, containing 386 (PETROTOX) or 160 (PETRORISK) HBs belonging to different chemical classes and molecular weight ranges, but with equal mass assigned to each of them. To this artificial petroleum substance a guided series of subsequent modifications in mass allocation to a delineated number of HBs belonging to different chemical classes and carbon ranges was performed, in what we perceived as a guided "walking tour

  3. PETROLEUM-COLLECTING AND DISPERSING CHEMICALS FOR ...

    African Journals Online (AJOL)

    Preferred Customer

    Films of petroleum origin reflecting sunlight rays hinder absorption of energy by water necessary for life ... Dispersing chemicals like mechanical clean-up methods have their own place in fighting oil spills. They are ... yellow color, and filtered.

  4. Application of neural networks to the petroleum refining industry; Aplicando redes neurais a industria de refino de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Silva, R M.C.F. da [PETROBRAS, Rio de Janeiro, RJ (Brazil); Chaves, C. [Fundacao Gorceix, Belo Horizonte, MG (Brazil)

    2000-07-01

    Neural Network technology is an approach for describing behavior from process data, using mathematical algorithms and statistical techniques. The use of Neural Network in industrial process modeling and property estimation of feedstocks or products, is increasing in several kinds of chemical industries. This paper comments about critical successful factors, advantages and disadvantages of this methodology. Moreover, it presents some applications in Hydrotreating Process of the petroleum refining industry. In Hydrotreating of feedstocks, knowledge about characteristics of process regarding product property estimation, hydrogen consumption and removal of contaminants (sulfur, nitrogen, aromatics), are very important to process optimization, product specification and environment protection. The Neural Network technique has been used to model the behaviour of the chemical hydrogen consumption, the conversions of the hydrogenation of aromatic hydrocarbons, hydrodesulfurization and hydro denitrogenation reactions and the physical properties of product with operational conditions and feedstock properties. In addition, Neural Networks have been built to predict the cetane number of feedstocks. (author)

  5. Petroleum marketing monthly with data for April 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-05

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data on the Petroleum Marketing Monthly. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption.

  6. Developing human health exposure scenarios for petroleum substances under REACH

    Energy Technology Data Exchange (ETDEWEB)

    Carter, M.; De Wilde, P.; Maksimainen, K.; Margary, A.; Money, C.; Pizzella, G.; Svanehav, T.; Tsang, W.; Urbanus, J.; Rohde, A.

    2012-12-15

    This report describes the approaches that were adopted by CONCAWE to prepare the human exposure estimates in the chemical safety assessments of the REACH registration dossiers for petroleum substances based on all applicable regulatory guidance. Separate exposure estimates were developed for workers and for consumers and included inhalation and dermal routes. The complex nature of petroleum substances required various scientifically justified refinements of the regulatory guidance.

  7. Petroleum marketing annual, 1991

    International Nuclear Information System (INIS)

    1992-08-01

    The Petroleum Marketing Annual contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. For this publication, all estimates have been recalculated since their earlier publication in the Petroleum Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication dates

  8. Petroleum marketing annual 1993

    International Nuclear Information System (INIS)

    1995-01-01

    The Petroleum Marketing Annual (PMA) contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board (f.o.b.) and landed cost of imported crude oil, and the refiners acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. For this publication, all estimates have been recalculated since their earlier publication in the Petroleum Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication dates

  9. Petroleum marketing annual 1993

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    The Petroleum Marketing Annual (PMA) contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board (f.o.b.) and landed cost of imported crude oil, and the refiners acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. For this publication, all estimates have been recalculated since their earlier publication in the Petroleum Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication dates.

  10. Petroleum 2006. Statistical elements

    International Nuclear Information System (INIS)

    2007-06-01

    This document gathers in 5 parts, the main existing statistical data about petroleum industry in France and in the rest of the world, together with an insight on other energy sources: 1 - petroleum in the French economy (petroleum and other energies, petroleum and transports, petroleum and energy in the industry, the residential and tertiary sectors, environment: 42 pages); 2 - the French petroleum industry (exploration, production, foreign trade, transports, refining, storage, petrochemistry: 66 pages); 3 - the French market of petroleum products (evolution of sales by product and detail by region for the past year: 38 pages); 4 - prices and taxes of petroleum products (world prices and rates for crude and refined products, evolution of fret rates, retail prices and French taxes: 28 pages); 5 - petroleum in the world (world energy production and consumption, detailed petroleum activity by main areas and for the main countries: 112 pages). (J.S.)

  11. Petroleum marketing monthly with data for January 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    This publication provides information and statistical data on a variety of crude oils and refined petroleum products. Statistics on crude oil costs and refined petroleum products sales are presented. Data on crude oil include the domestic purchase price, the free on board and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oils and sales of petroleum products are presented in five sections: (1) summary statistics, (2) crude oil prices, (3) prices of petroleum products, (4) volumes of petroleum products, and (5) prime supplier sales volumes of petroleum products for local consumption. 50 tabs.

  12. Processes subject to integrated pollution control. Petroleum processes: oil refining and associated processes

    International Nuclear Information System (INIS)

    1995-01-01

    This document, part of a series offering guidance on pollution control regulations issued by Her Majesty's Inspectorate of Pollution, (HMIP) focuses on petroleum processes such as oil refining and other associated processes. The various industrial processes used, their associated pollution release routes into the environment and techniques for controlling these releases are all discussed. Environmental quality standards are related to national and international agreements on pollution control and abatement. HMIP's work on air, water and land pollution monitoring is also reported. (UK)

  13. Petroleum marketing monthly with data for May 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  14. Petroleum marketing monthly with data for September 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures and accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  15. North American refining

    International Nuclear Information System (INIS)

    Osten, James; Haltmaier, Susan

    2000-01-01

    This article examines the current status of the North American refining industry, and considers the North American economy and the growth in demand in the petroleum industry, petroleum product demand and quality, crude oil upgrading to meet product standards, and changes in crude oil feedstocks such as the use of heavier crudes and bitumens. Refining expansion, the declining profits in refining, and changes due to environmental standards are discussed. The Gross Domestic Product and oil demand for the USA, Canada, Mexico, and Venezuela for the years 1995-2020 are tabulated

  16. Petroleum movements and investments in the refining industry: The impact of worldwide environmental regulations

    International Nuclear Information System (INIS)

    Guariguata U., G.

    1995-01-01

    Since the enactment of the US Clean Air Act Amendments of 1990, the worldwide refining industry has aligned itself to become increasing attuned to the future well-being of the environment. Refiners must now develop strategies which address careful selection of crude slates, significant increases and changes in product movements, and upgrading of facilities to meet growing demand--in short, strategies which allow them to make substantial increases in capital investments. The objective of this paper is to determine the regional capital investments refiners must make in order to comply with environmental legislation. The methodology in making this determination was founded on a comprehensive analysis of worldwide petroleum supply/demand and distribution patterns for the coming five years, and included evaluation of a set of linear programming (LP) models based on forecasts for regional product demands and projections of regional specifications. The models considered two scenarios, in which either (1) refinery expansion occurs chiefly in the market consuming regions, or (2) crude producers take control of incremental crude volumes and further expand their planned refining projects and the marketing of refined products. The results of these models, coupled with an understanding of geopolitical situations and economic analyses, provided estimates for capital expenditures for the coming decade. In specific, the following issues were addressed, and are discussed in this paper: refined product trade outlook; crude supply; crude quality; shipping; and capital investments

  17. Comparison of the composition between coal-liquid naphtha and petroleum gasoline

    Energy Technology Data Exchange (ETDEWEB)

    Miki, Y.; Sugimoto, Y.; Ono, S.; Machida, M. [National Chemical Laboratory for Industry, Tsukuba (Japan)

    1997-08-01

    Compositional characterization was performed using a gas chromatography-mass spectrometry-atomic emission detector technique on coal-liquid raw naphtha, coal-liquid refined naphtha, coal-liquid reformate and commercial petroleum gasoline. The chemical composition of these oils are divided into five groups: chain hydrocarbons, monocyclic hydrocarbons, bicyclic hydrocarbons, oxygen-containing compounds and other compounds (containing unidentified compounds). Compared to petroleum gasoline, the coal-liquid raw naphtha contains higher concentrations of straight paraffins, cycloparaffins, cycloolefins, bicycloparaffins and oxygen-containing compounds, and contains lower concentrations of brached paraffins and monocyclic aromatic compounds. Phenols and ketones are the major components of oxygen-containing compounds. The total concentration of paraffins and cycloparaffins increased after refining. The hydrogenation of olefins and the hydrodeoxygenation of oxygen-containing compounds are suggested to proceed during the refining process. The reforming treatment increased the concentrations of branched paraffins and monocyclic aromatic compounds; this suggests that coal-liquid reformat could be used as a major blending substance with petroleum gasoline.

  18. Concerning problems of petroleum refining facilities. ; Promote international lateral work sharing, and strengthening of infrastructures in petroleum industry. Sekiyu seisei setsubi mondai ni tsuite. ; Kokusei suihei bungyo no suishin to sekiyu sangyo no kiban kyoka wo

    Energy Technology Data Exchange (ETDEWEB)

    1991-06-05

    This paper discusses how to promote international lateral work sharing and how to strengthen infrastructures in the petroleum industry, as a problem prevailing over the petroleum refining facilities in Japan. Excess distillation facilities have been applied with the disposition policy. However, in view of the supply and demand situation in petroleum products for medium to long term span in the world with the pan-Pacific region as the main concern, that applicable to Japan, and that experienced during the Persian Gulf crisis, the excess facility disposition policy was revised, particularly on white kerosene, of which supply and demand tightness is concerned about, so that production capacities may be increased as required. Japan, a large presence in the international economics, is required to work more positively on petroleum refining facilities located in the oil producing countries and intermediate locations to promote the international lateral work sharing. On the one hand, in order to strengthen the infrastructures in the Japanese petroleum industry, it is necessary to promote rationalization and use at higher efficiency of the oil supply system, and convergence of the the petroleum industry, including joint investments for projects exceeding capabilities of individual enterprises. 3 tabs.

  19. Petroleum marketing monthly, July 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-15

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  20. Petroleum marketing monthly, January 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  1. Petroleum marketing monthly, August 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-10

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  2. Petroleum marketing monthly, April 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-12

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  3. Petroleum marketing monthly, October 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-07

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase prices, the f.o b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Sales data for motor gasoline, distillates residuals, aviation fuels, kerosene, and propane are presented.

  4. Petroleum marketing monthly, May 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-26

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  5. Study of sulfur and vanadium in heavy petroleum products

    Energy Technology Data Exchange (ETDEWEB)

    Novelli, J.M.

    1982-10-01

    Sulfur compounds in heavy oil fractions (>450/sup 0/C) are studied in the first part of this work. After chemical oxidation by metachloroperbenzoic acid to obtain sulfones, sulfur compounds are analyzed by infrared spectroscopy for their qualitative and quantitative repartition. The method can be applied for the study of sulfur containing molecules before and after structural modifications of petroleum fractions by any chemical refining processes. In a second part vanadium is characterized in asphalt by physicochemical and chemical methods. 80% of the vanadium in a Boscan asphalt is under the form of porphyrins. Different associations are evidenced in petroleum fractions and metalloporphyrins, but the liaison between the vanadyl group and heterocondensate from asphalts is the more frequent.

  6. South Korea - oil refining overview

    International Nuclear Information System (INIS)

    Hayes, D.

    1999-01-01

    Following the economic problems of the 1990s, the petroleum refining industry of South Korea underwent much involuntary restructuring in 1999 with respect to takeovers and mergers and these are discussed. The demand for petroleum has now pretty well recovered. The reasons for fluctuating prices in the 1990s, how the new structure should be cushioned against changes in the future, and the potential for South Korea to export refined petroleum, are all discussed

  7. Petroleum marketing monthly, August 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-11-07

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 49 tabs.

  8. Petroleum price

    International Nuclear Information System (INIS)

    Chevallier, B.

    2009-01-01

    The 'AFTP' conference on 'petroleum prices' organized by Total last March, tries to explain the different aspects of the crisis we undergo for July 2007 and its consequential effects on the petroleum markets (supply, demand evolvements, impacts on reserves, prices, refining...). (O.M.)

  9. Assessment of chemical loadings to Newark Bay, New Jersey from petroleum and hazardous chemical accidents occurring from 1986 to 1991

    International Nuclear Information System (INIS)

    Gunster, D.G.; Bonnevie, N.L.; Gillis, C.A.; Wenning, R.J.

    1993-01-01

    Newark Bay, New Jersey, is particularly vulnerable to ecological damage from accidental petroleum and chemical spills due to the enclosed nature of the bay and the large volume of chemical and petroleum commerce within the region. A review of the New Jersey Department of Environmental Protection and Energy's database of hazardous chemical spills in New Jersey waterways was conducted to determine the frequency and volume of chemical and petroleum spills in Newark Bay and its major tributaries. Accidents reported from 1986 to 1991 were extracted from the database and summarized. The compilation of records indicated that 1400 incidents, resulting in the release of more than 18 million gallons of hazardous materials to the estuary had been reported to state officials. The bulk of the chemicals released to the aquatic environment were petroleum products, specifically No. 2 Fuel Oil (4,636,512 gallons) and No. 6 Fuel Oil (12,600,683 gallons). The majority of the reported incidents occurred in the Arthur Kill and its tributaries. The results indicate that accidental discharge of petroleum and other hazardous chemicals to Newark Bay represents a significant ongoing source of chemical pollution

  10. Petroleum marketing monthly, May 1999, with data for February 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Initial Estimates; Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. 7 figs., 50 tabs.

  11. Petroleum marketing monthly, May 1998, with data for February 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    The Petroleum Marketing Monthly (PMM) provides Information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  12. Petroleum marketing monthly, July 1998 with data for April 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  13. Petroleum marketing monthly: August 1998, with data for May 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-08-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. 7 figs., 50 tabs.

  14. Petroleum marketing monthly, September 1998, with data for June 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  15. Petroleum marketing monthly, December 1998 with data for September 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  16. Petroleum marketing monthly, June 1999, with data for March 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-06-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Initial Estimates; Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. 7 figs., 50 tabs.

  17. Petroleum marketing monthly, January 1999 with data for October 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-01-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  18. Petroleum marketing monthly, July 1999, with data for April 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: initial estimates; summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 70 tabs.

  19. Petroleum marketing monthly, November 1998, with data for August 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Summary statistics; Crude oil prices; Prices of petroleum products; Volumes of petroleum products; and Prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  20. Petroleum marketing monthly, October 1998, with data for July 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Summary statistics; Crude oil prices; Prices of petroleum products; Volumes of petroleum products; and Prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  1. Petroleum marketing monthly, June 1998, with data from March 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-06-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  2. Petroleum marketing monthly, March 1999 with data for December 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: summary statistics; crude oil prices; prices of petroleum products; volumes of petroleum products; and prime supplier sales volumes of petroleum products for local consumption. 7 figs., 50 tabs.

  3. Petroleum marketing monthly, February 1999 with data for November 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in six sections: Initial Estimates; Summary Statistics; Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption. 7 figs., 50 tabs.

  4. Petroleum marketing monthly, June 1995 with data for March 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-16

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly. Monthly statistics on purchases of crude oil and sales of petroleum products are presented in the Petroleum Marketing Monthly in five sections: Summary Statistics Crude Oil Prices; Prices of Petroleum Products; Volumes of Petroleum Products; and Prime Supplier Sales Volumes of Petroleum Products for Local Consumption.

  5. Petroleum marketing monthly, June 1996: With data for March 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-04

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o. b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  6. Petroleum marketing monthly, May 1996 with data for February 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-02

    The Petroleum Marketing Monthly provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  7. Petroleum marketing monthly, May 1995 with data for February 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-09

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  8. Petroleum marketing monthly, April 1999, with data for January 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly. 56 tabs.

  9. Petroleum marketing monthly, October 1995 with data for July 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-03

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost Of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  10. Petroleum marketing monthly, September 1995 with data for June 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-31

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the fob and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Monthly.

  11. An empirical analysis of lumpy investment. The case of US petroleum refining industry

    International Nuclear Information System (INIS)

    Asano, Hirokatsu

    2002-01-01

    This paper employs five econometric models to examine lumpy investment and investigates the investment behavior of the US petroleum refining industry. Firms in the industry are classified into three groups by their size. All three groups show zero investment, disinvestment and investment in accordance with economic conditions. The analysis finds the minimum amount of investment and disinvestment for each group, which suggests that the size of fixed costs of investment is substantial, regardless of firm size. However, small firms adjust capital stock more slowly than medium or large firms. The analysis also suggests the existence of a convex adjustment cost

  12. Petroleum marketing monthly, January 1996 with data for October 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-04

    The Petroleum Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane.

  13. Petroleum Marketing Annual, 1989

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-18

    This report contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for us by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board (f.o.b.) and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 13 figs., 51 tabs.

  14. Petroleum marketing monthly, June 1997 with data for March 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  15. Petroleum marketing monthly, March 1998, with data for December 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  16. Petroleum marketing monthly, September 1997 with data for June 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  17. Petroleum marketing monthly, January 1998 with data for October 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  18. Petroleum marketing monthly, April 1996 with data for January 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-02

    The Petroleum Marketing Monthly provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane.

  19. Petroleum marketing monthly, March 1996 with data for December 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-08

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane.

  20. Petroleum marketing monthly, May 1997 with data for February 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  1. Petroleum marketing monthly, November 1997 with data for August 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  2. Petroleum marketing monthly, April 1997 with data for January 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  3. Petroleum marketing monthly, February 1997 with data for November 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  4. Petroleum marketing monthly, October 1997 with data for July 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    The Petroleum Marketing Monthly (PMM) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  5. Petroleum Refinery Effluents Treatment by Advanced Oxidation Process with Methanol

    Energy Technology Data Exchange (ETDEWEB)

    Shoucheng, Wen [Yangtze Univ., HuBei Jingzhou (China)

    2014-02-15

    Petroleum refinery effluents are waste originating from industries primarily engaged in refining crude oil. It is a very complex compound of various oily wastes, water, heavy metals and so on. Conventional processes are unable to effectively remove the chemical oxygen demand (COD) of petroleum refinery effluents. Supercritical water oxidation (SCWO) was proposed to treat petroleum refinery effluents. In this paper, methanol was used to investigate co-oxidative effect of methanol on petroleum refinery effluents treatment. The results indicated that supercritical water oxidation is an effective process for petroleum refinery effluents treatment. Adding methanol caused an increase in COD removal. When reaction temperature is 440 .deg. C, residence time is 20 min, OE is 0.5 and initial COD is 40000 mg/L, and COD removal increases 8.5%.

  6. Petroleum Refinery Effluents Treatment by Advanced Oxidation Process with Methanol

    International Nuclear Information System (INIS)

    Shoucheng, Wen

    2014-01-01

    Petroleum refinery effluents are waste originating from industries primarily engaged in refining crude oil. It is a very complex compound of various oily wastes, water, heavy metals and so on. Conventional processes are unable to effectively remove the chemical oxygen demand (COD) of petroleum refinery effluents. Supercritical water oxidation (SCWO) was proposed to treat petroleum refinery effluents. In this paper, methanol was used to investigate co-oxidative effect of methanol on petroleum refinery effluents treatment. The results indicated that supercritical water oxidation is an effective process for petroleum refinery effluents treatment. Adding methanol caused an increase in COD removal. When reaction temperature is 440 .deg. C, residence time is 20 min, OE is 0.5 and initial COD is 40000 mg/L, and COD removal increases 8.5%

  7. The petroleum industry in 2003

    International Nuclear Information System (INIS)

    2004-01-01

    This 2004 edition of the petroleum industry activities presents results and data concerning the crude oil prices evolution, the petroleum exploration and production in france and in the world, the para-petroleum industry, the hydrocarbons supplies, the refining, the quality evolution of the substitution products and fuels, the internal transports of petroleum products, the petroleum products storage, the petroleum products consumption, the petroleum products prices and taxation, the petroleum products distribution. (A.L.B.)

  8. Petroleum industry in 2004

    International Nuclear Information System (INIS)

    2005-01-01

    This document presents a detailed outlook of the petroleum industry in the world and more particularly in France in 2005: evolution of crude oil prices; petroleum exploration and production in the world and in France; the French para-petroleum and petroleum industry; the oil supplies; the refining activities; the evolution of products quality and the substitution fuels; the domestic transports, the storage and consumption of petroleum products; the fiscality, prices and distribution of petroleum products. (J.S.)

  9. Proceedings of the 1. Brazilian congress on R and D in petroleum and gas. Abstracts

    International Nuclear Information System (INIS)

    2001-01-01

    Some works on new perspectives in petroleum industry and the application of the developed methodology that allow an increase in the petroleum production are presented. Technical aspects on equipment for drilling in deep waters as well as offshore exploration are discussed. The petroleum and natural gas transportation system storage and risks are evaluated. Studies about ecological aspects like wells drilling, simulation and modeling for petroleum and gas production, refining pipelines and chemical determination of fuels are analyzed. Some environmental aspects, natural resources, pollution caused by uses of fuels are showed

  10. Proceedings of the 3. NCUT meeting on upgrading and refining of heavy oil, bitumen and synthetic crude oil and the 2. symposium on stability and compatibility during the production, transportation and refining of petroleum

    International Nuclear Information System (INIS)

    2003-01-01

    This conference highlights new developments in refining processes for heavy oil, bitumen, and synthetic crudes. The oil sands/heavy oil industry in Canada has grown significantly in the last decade and could triple by 2012 to reach 2.6 million barrels per day. Experts from the petroleum industry, government organizations and technology providers attended this conference which identified technology gaps and areas where improvements are needed. The presentations demonstrated that many new technologies associated with heavy oil bitumen upgrading and refining have posed compatibility and stability challenges for pipeliners, upgraders and refiners. One of the issues addressed at the conference was the effect of upgrading technologies on market price due to the expected increase in production. Another important issue is how production of bitumen can be increased without significantly increasing greenhouse gas emissions from the refineries and upgrading facilities. The sessions of the conference were entitled: new technology developments in bitumen upgrading; secondary upgrading developments and expanded product opportunities; environmental issues and expanded oil sands development; and, stability and compatibility during the production, transportation and refining of petroleum. Twenty six presentations were indexed separately for inclusion in this database. tabs., figs

  11. Canadian Petroleum Products Inst. annual report, 1991

    International Nuclear Information System (INIS)

    1992-01-01

    The Canadian Petroleum Products Institute (CPPI) was created in 1989 as a nonprofit association of Canadian refiners and marketers of petroleum products. In 1991, the Atlantic Petroleum Association, the Quebec Petroleum Association, the Ontario Petroleum Association, the Canada West Petroleum Association, and the Petroleum Association for Conservation of the Canadian Environment (PACE) were integrated into the CPPI. The objective of the CPPI is to serve and represent the refining and marketing sectors of the petroleum industry with respect to environment, health and safety, and business issues. An industry overview is provided, as well as highlights of environmental achievements and challenges, and economics and operations for the year. Lists of CPPI publications, standing committees, and officers are also included. 9 figs

  12. Petroleum marketing monthly, November 1991. [Contains glossary

    Energy Technology Data Exchange (ETDEWEB)

    1991-11-07

    The Petroleum Marketing Monthly is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 53 tabs.

  13. Petroleum marketing monthly with data for October 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This publication presents statistical data on crude oil costs and refined petroleum products sales. Data on petroleum include the domestic first purchase price, landed cost of imported crude oil, and the refiner`s acquisition cost of crude oil. Sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane.

  14. Ex-USSR: petroleum activities in 1991

    International Nuclear Information System (INIS)

    1992-01-01

    This paper gives statistical data on economy and petroleum industry in ex-USSR: Primary energy production and consumption (coal, petroleum, natural gas, primary power), petroleum and natural gas reserves, drilling activity, exports and imports of petroleum products, refining capacity. 2 figs., 14 tabs

  15. Petroleum industry 1996; L`industrie petroliere 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    A survey on petroleum industry activities in France and in the world in 1996 is presented. The different parts and themes of the study are: evolution of the petroleum market (international and French markets, supply and demand, prices, mark-up and taxation in France and in Europe); activities in the petroleum industries (exploration and production, maritime transportation, inland transportation and storage, refining, quality of petroleum products and substitution fuels, oil distribution); environment and safety (refining, distribution and evolution of products, pipeline and maritime transportation, exploration and production); situation of the sector`s companies (oil groups, para-petroleum French industry, scientific and technical research)

  16. Petroleum industry 1996; L`industrie petroliere 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    A survey on petroleum industry activities in France and in the world in 1996 is presented. The different parts and themes of the study are: evolution of the petroleum market (international and French markets, supply and demand, prices, mark-up and taxation in France and in Europe); activities in the petroleum industries (exploration and production, maritime transportation, inland transportation and storage, refining, quality of petroleum products and substitution fuels, oil distribution); environment and safety (refining, distribution and evolution of products, pipeline and maritime transportation, exploration and production); situation of the sector`s companies (oil groups, para-petroleum French industry, scientific and technical research)

  17. The petroleum industry in 2005

    International Nuclear Information System (INIS)

    2006-01-01

    This document provides information on the petroleum industry for the year 2005. It discusses the world gas and petroleum markets, the world and french petroleum exploration and production, the petroleum and byproducts industry in France, the hydrocarbons supplying, the refining in France, the evolution of the products and fuels substitution quality, the internal transports of petroleum products, the storage consumption and taxes of petroleum products, the prices and distribution of the petroleum products. (A.L.B.)

  18. Economic missions. Synthetic file: the petroleum sector in Brazil (exploration and production); the refining activity in Brazil; natural gas in Brazil: a fragile market, inferior to forecasts

    International Nuclear Information System (INIS)

    Anon.

    2002-01-01

    This dossier prepared by the economic mission of the French embassy in Brazil makes a synthesis of the exploration-production and refining activities of the petroleum industry, and of the natural gas distribution market in Brazil: oil reserves and production, Petrobras company, partnership agreements with Petrobras, legal aspects, concessions, projects financing, refining capacity, refinery projects in progress or under study, para-petroleum market perspectives and opportunities, natural gas market development, pipelines network, gas utilities, privatization and foreign participation, lack of expertise and of gas infrastructures and equipments. (J.S.)

  19. Petroleum Marketing Monthly, January 1991. [Contains Glossary

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-09

    The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 55 tabs.

  20. Petroleum marketing monthly, September 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-14

    This document designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and for the refiners` acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  1. Petroleum marketing monthly, June 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-10

    This publication is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented.

  2. Bandwidth Study on Energy Use and Potential Energy Savings Opportunities in U.S. Petroleum Refining

    Energy Technology Data Exchange (ETDEWEB)

    Sabine Brueske, Caroline Kramer, Aaron Fisher

    2015-06-01

    Energy bandwidth studies of U.S. manufacturing sectors can serve as foundational references in framing the range (or bandwidth) of potential energy savings opportunities. This bandwidth study examines energy consumption and potential energy savings opportunities in U.S. petroleum refining. The study relies on multiple sources to estimate the energy used in nine individual process areas, representing 68% of sector-wide energy consumption. Energy savings opportunities for individual processes are based on technologies currently in use or under development; these potential savings are then extrapolated to estimate sector-wide energy savings opportunity.

  3. Report on the analysis of the quality assurance and quality control data for the petroleum refining sector

    International Nuclear Information System (INIS)

    Thorton, N.; Michajluk, S.; Powell, T.; Lee, G.

    1992-07-01

    The Ontario Municipal-Industrial Strategy for Abatement (MISA) program has the ultimate goal of virtual elimination of persistent toxic contaminants from all discharges to provincial waterways. MISA effluent monitoring regulations, first promulgated for the petroleum refining sector, require direct dischargers to monitor their effluents for a specified number of contaminants and a specified frequency over a one-year period. The refineries were also required to carry out a quality control program on all process effluent streams and for specified analytical test groups. Two types of quality assurance/quality control (QA/QC) data were required: field QA/QC, which would indicate problems with field contamination or sampling, and laboratory QA/QC, which would indicate problems with the laboratory. The objectives of QA/QC analysis are to identify the significance of biases, chronic contamination, data variability, and false results, to assess data validity, and to allow data comparability among companies and laboratories. Of the 149 parameters monitored in the petroleum refining sector, 34 qualified as candidates for setting effluent limits. The QA/QC evaluation of monitoring data for the 34 parameters confirmed the presence of 18 parameters at such levels that they could be used to set statistically valid quantitative limits. 50 tabs

  4. Analysis of solvent dyes in refined petroleum products by electrospray ionization mass spectrometry

    Science.gov (United States)

    Rostad, C.E.

    2010-01-01

    Solvent dyes are used to color refined petroleum products to enable differentiation between gasoline, diesel, and jet fuels. Analysis for these dyes in the hydrocarbon product is difficult due to their very low concentrations in such a complex matrix. Flow injection analysis/electrospray ionization/mass spectrometry in both negative and positive mode was used to optimize ionization of ten typical solvent dyes. Samples of hydrocarbon product were analyzed under similar conditions. Positive electrospray ionization produced very complex spectra, which were not suitably specific for targeting only the dyes. Negative electrospray ionization produced simple spectra because aliphatic and aromatic moieties were not ionized. This enabled screening for a target dye in samples of hydrocarbon product from a spill.

  5. Petroleum marketing monthly, December 1996 with data for September 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    This report provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. 7 figs., 50 tabs.

  6. Indian refining industry

    International Nuclear Information System (INIS)

    Singh, I.J.

    2002-01-01

    The author discusses the history of the Indian refining industry and ongoing developments under the headings: the present state; refinery configuration; Indian capabilities for refinery projects; and reforms in the refining industry. Tables lists India's petroleum refineries giving location and capacity; new refinery projects together with location and capacity; and expansion projects of Indian petroleum refineries. The Indian refinery industry has undergone substantial expansion as well as technological changes over the past years. There has been progressive technology upgrading, energy efficiency, better environmental control and improved capacity utilisation. Major reform processes have been set in motion by the government of India: converting the refining industry from a centrally controlled public sector dominated industry to a delicensed regime in a competitive market economy with the introduction of a liberal exploration policy; dismantling the administered price mechanism; and a 25 year hydrocarbon vision. (UK)

  7. Use of absorption spectroscopy for refined petroleum product discrimination

    Science.gov (United States)

    Short, Michael

    1991-07-01

    On-line discrimination between arbitrary petroleum products is necessary for optimal control of petroleum refinery and pipeline operation and process control involving petroleum distillates. There are a number of techniques by which petroleum products can be distinguished from one another. Among these, optical measurements offer fast, non-intrusive, real-time characterization. The application examined here involves optically monitoring the interface between dissimilar batches of fluids in a gasoline pipeline. After examination of near- infrared and mid-infrared absorption spectroscopy and Raman spectroscopy, Fourier transform mid-infrared (FTIR) spectroscopy was chosen as the best candidate for implementation. On- line FTIR data is presented, verifying the applicability of the technique for batch interface detection.

  8. Study of variation grain size in desulfurization process of calcined petroleum coke

    Science.gov (United States)

    Pintowantoro, Sungging; Setiawan, Muhammad Arif; Abdul, Fakhreza

    2018-04-01

    Indonesia is a country with abundant natural resources, such as mineral mining and petroleum. In petroleum processing, crude oil can be processed into a source of fuel energy such as gasoline, diesel, oil, petroleum coke, and others. One of crude oil potentials in Indonesia is petroleum coke. Petroleum coke is a product from oil refining process. Sulfur reducing process in calcined petroleum cokes can be done by desulfurization process. The industries which have potential to become petroleum coke processing consumers are industries of aluminum smelting (anode, graphite block, carbon mortar), iron riser, calcined coke, foundry coke, etc. Sulfur reducing process in calcined petroleum coke can be done by thermal desulfurization process with alkaline substance NaOH. Desulfurization of petroleum coke process can be done in two ways, which are thermal desulfurization and hydrodesulphurization. This study aims to determine the effect of various grain size on sulfur, carbon, and chemical bond which contained by calcined petroleum coke. The raw material use calcined petroleum coke with 0.653% sulfur content. The grain size that used in this research is 50 mesh, then varied to 20 mesh and 100 mesh for each desulfurization process. Desulfurization are tested by ICP, UV-VIS, and FTIR to determine levels of sulfur, carbon, chemical bonding and sulfur dissolved water which contained in the residual washing of calcined petroleum coke. From various grain size that mentioned before, the optimal value is on 100 mesh grain size, where the sulfur content in petroleum coke is 0.24% and carbon content reaches the highest level of 97.8%. Meanwhile for grain size 100 mesh in the desulfurization process is enough to break the chemical bonds of organic sulfur in petroleum coke.

  9. Effect of Chemical Refining on Citrullus Colocynthis and Pongamia ...

    African Journals Online (AJOL)

    Oil from the both plant seeds was evaluated (both before and after refining) for different physico-chemical parameters like free fatty acids, iodine value, peroxide value, saponification value, unsaponifiable matter and fatty acid composition. Oil yield (30-35 %) in both plants was found average. After refining, per cent reduction ...

  10. Antimicrobial properties and chemical compositions of the petroleum ...

    African Journals Online (AJOL)

    The study was designed to investigate the antimicrobial and chemical compositions of the petroleum ether extract of theaerial parts of Rauvolfia vomitoria. The aerial parts of the plant were air dried under shade, pounded using wooden mortar and pestle into coarse powder. The coarse powder was extracted in aSoxhlet ...

  11. Thermal-chemical Mantle Convection Models With Adaptive Mesh Refinement

    Science.gov (United States)

    Leng, W.; Zhong, S.

    2008-12-01

    In numerical modeling of mantle convection, resolution is often crucial for resolving small-scale features. New techniques, adaptive mesh refinement (AMR), allow local mesh refinement wherever high resolution is needed, while leaving other regions with relatively low resolution. Both computational efficiency for large- scale simulation and accuracy for small-scale features can thus be achieved with AMR. Based on the octree data structure [Tu et al. 2005], we implement the AMR techniques into the 2-D mantle convection models. For pure thermal convection models, benchmark tests show that our code can achieve high accuracy with relatively small number of elements both for isoviscous cases (i.e. 7492 AMR elements v.s. 65536 uniform elements) and for temperature-dependent viscosity cases (i.e. 14620 AMR elements v.s. 65536 uniform elements). We further implement tracer-method into the models for simulating thermal-chemical convection. By appropriately adding and removing tracers according to the refinement of the meshes, our code successfully reproduces the benchmark results in van Keken et al. [1997] with much fewer elements and tracers compared with uniform-mesh models (i.e. 7552 AMR elements v.s. 16384 uniform elements, and ~83000 tracers v.s. ~410000 tracers). The boundaries of the chemical piles in our AMR code can be easily refined to the scales of a few kilometers for the Earth's mantle and the tracers are concentrated near the chemical boundaries to precisely trace the evolvement of the boundaries. It is thus very suitable for our AMR code to study the thermal-chemical convection problems which need high resolution to resolve the evolvement of chemical boundaries, such as the entrainment problems [Sleep, 1988].

  12. Odor management in petroleum refining units; Gerenciamento de odores em refinaria de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Gutierres, Ricardo; Evangelho, Mauro Rocha; Moreira, Andrea Cristina de Castro Araujo [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). P e D de Energia e Desenvolvimento Sustentavel (PDEDS)

    2004-07-01

    Odor emissions can cause serious annoyance in the neighbourhood of the emissions sources related to industrial processes and effluent and wastewater treatments. Jointly with the industrial control for reducing the odor, the emissions monitoring becomes convenient for identification and quantification of compounds responsible for the odors. To reach this objective, they are proposed analytical and olfactometric methodologies. The analytical procedures are based on the application of methods of sampling and analysis in gas chromatography-mass spectrometry, accepted for environmental agencies. The olfactometric methodology is based on the use of procedures that consider the subjective manner with that the odors are felt and evaluated by the people. This work describes as these methodologies can be applied in petroleum refining units. (author)

  13. Determination of radioactivity in petroleum products and wastes

    International Nuclear Information System (INIS)

    Hrichi, Hajer

    2009-01-01

    At this end engineering study, we determined the activities of gamma- emitting radionuclides belonging to the families of 238 U, 235 U, 232 Th and 40K in the petroleum products and wastes of the refinery S.T.I.R. The activities of radionuclides which exceed that of crude oil prove that it's a technologically enhanced natural radioactivity since several chemical products were injected during the refining process. (Author)

  14. Petroleum supply monthly, April 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographical regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US.

  15. English-Chinese oil refining dictionary. [English-Chinese

    Energy Technology Data Exchange (ETDEWEB)

    Chou, P; Zing, Z [eds.

    1979-01-01

    The dictionary is a collection of many disciplines but specialized in the terminology related to petroleum refining. It contains terms in areas such as refining, factory equipment and installation, petroleum products and test analysis, and instrument automation. It also contains terms in areas of petrochemistry, oil storage and transport, computer technology, and environmental protection. The total number of terms collected was approximately 53,000.

  16. 13 CFR 121.511 - What is the size standard for buying Government-owned petroleum?

    Science.gov (United States)

    2010-01-01

    ... buying Government-owned petroleum? 121.511 Section 121.511 Business Credit and Assistance SMALL BUSINESS... Government-owned petroleum? A concern is small for this purpose if it is primarily engaged in petroleum refining and meets the size standard for a petroleum refining business. ...

  17. Petroleum supply monthly

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blends, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  18. The European refining and distribution industry at the 2010 vista

    International Nuclear Information System (INIS)

    Lacour, J.J.; Tessmer, G.; Ward, I.

    1998-01-01

    Oil company chairmen belonging to the AFTP, DGMK and IP associations met together to debate about the future of the European refining industry. The following topics were discussed: is it the end of the refining crisis? Which uncertainties will have to be met? What is the situation of petroleum products supply and demand? What are the consumers' expectations? How to face the environmental constraints? Which future for the refining activities in Europe? Seven round-tables took place with the following themes: the factors of uncertainty in the future of refining activities, the petroleum products supply and demand (automotive fuels, fuel oils, lubricants), the refining activities and the supply of consumers (service stations and supermarkets), the situation of the European petroleum policy, the European refining industry and the public regulations (development of more efficient environmental approaches), the impact of environmental constraints and the technical solutions, and the future of the refining industry. (J.S.)

  19. Petroleum industry. 1997 activity report; L`industrie Petroliere. Rapport d`activite 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    This activity report from the direction of hydrocarbons of the French general direction of energy and raw materials (ministry of economy, finances and industry) presents an economic analysis of the activities of the French petroleum industry for 1997. After a recall of the missions of the direction of hydrocarbons, the report analyses successively: 1- the evolution of the petroleum market: the international petroleum market in 1997, the hydrocarbon supplies and external trade (natural gas, crude oil, condensates), the French petroleum market (primary energy consumption, final energy consumption, French petroleum consumption, the petroleum logistics in overseas departments and territories), the prices, margins and fiscal policy in France and Europe (crude oil and refined product prices in the international market, retail prices in France and Europe, the French petroleum fiscal policy, statistics of petroleum prices in France and Europe; 2- the petroleum industry activities: exploration and production in France and worldwide, the maritime and domestic transports and the storage (French commercial fleet, domestic transports, storage facilities, strategic stocks), the refining activity and the quality of products and fuel substitutes (refining, automotive fuels quality, bio-fuels), the distribution of petroleum products (automotive and diesel fuels, LPG, aircraft fuels, lubricants); 3- the environmental and safety aspects of refining, transportation (pipelines, tanker-ships) and exploration-production; 4- the economic situation of the companies: petroleum groups, French para-petroleum industry, scientific and technical research. (J.S.)

  20. Petroleum supply monthly, January 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    Data presented describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States. The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  1. Petroleum marketing monthly with data for April 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    This publication provides information and statistical data on a variety of crude oil costs and refined petroleum products sales. Data on crude oil include the domestic first purchase price, the free on board price and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The data provided are compiled from six Energy Information Administration survey forms. 50 tabs.

  2. Petroleum marketing monthly, September 1990. [Contains Glossary

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-11

    This report is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, education institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 55 tabs.

  3. Petroleum marketing monthly, October 1991. [Contains glossary

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-10

    This report is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiner's acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 55 tabs.

  4. Microbial enhanced separation of oil from a petroleum refinery sludge.

    Science.gov (United States)

    Joseph, P J; Joseph, Ammini

    2009-01-15

    Petroleum refineries around the world have adopted different technological options to manage the solid wastes generated during the refining process and stocking of crude oil. These include physical, chemical and biological treatment methods. In this investigation bacterial mediated oil separation is effected. Two strains of Bacillus were isolated from petroleum-contaminated soils, and inoculated into slurry of sludge, and sludge-sand combinations. The bacteria could effect the separation of oil so as to form a floating scum within 48h with an efficiency of 97% at < or =5% level of sludge in the sludge-sand mixture. The activity was traced to the production of biosurfactants by bacteria.

  5. Petroleum marketing monthly: September 1996, with data for June 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    The Petroleum Marketing Monthly provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. Detailed statistics for crude oil, including the price of imported crude oil by country of origin, by gravity, and by crude stream. To aid the reader in determining the market changes, the majority of the tables show data for the report month and previous months for the current year, and the report month for the previous year. 7 figs., 50 tabs.

  6. Petroleum Supply Monthly, July 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-28

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  7. Petroleum Supply Monthly

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  8. Chemical fingerprinting of petroleum biomakers using time warping and PCA

    DEFF Research Database (Denmark)

    Christensen, Jan H.; Tomasi, Giorgio; Hansen, Asger B.

    2005-01-01

    A new method for chemical fingerprinting of petroleum biomakers is described. The method consists of GC-MS analysis, preprocessing of GC-MS chromatograms, and principal component analysis (PCA) of selected regions. The preprocessing consists of baseline removal by derivatization, normalization...

  9. Causes for an asymmetric relation between the price of crude oil and refined petroleum products

    International Nuclear Information System (INIS)

    Kaufmann, R.K.; Laskowski, C.

    2005-01-01

    We revisit the issue of asymmetries in the relation between the price of crude oil and refined petroleum products in the United States. An econometric analysis of monthly data indicates that the asymmetric relationship between the price of crude oil and motor gasoline is generated by refinery utilization rates and inventory behavior. The asymmetric relation between the price of crude oil and home heating oil probably is generated by contractual arrangements between retailers and consumers. Together, these results imply that price asymmetries may be generated by efficient markets. Under these conditions, there is little justification for policy interventions to reduce or eliminate price asymmetries in motor gasoline and home heating oil markets. (author)

  10. Petroleum supply monthly, August 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-26

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  11. Saudi Arabia: petroleum industry review

    International Nuclear Information System (INIS)

    Shammas, Pierre

    2000-01-01

    A comprehensive review is provided of Saudi Arabia's petroleum industry covering oil and gas exploration and production, refining, oil and gas trade, marketing and Saudi overseas investments. Profiles of key Saudi decision makers are provided. A statistical appendix includes data from the start of oil production in Saudi Arabia in 1938. Part I Geological potential; Part II The Saudi energy economy; Part III Production capacity; Part IV The oil refining sector ; Part V Exports and logistics; Part VI Overseas petroleum industry investments; Part VII The decision makers; Part VIII Statistical Appendix; Reserves, Production, Exports, Prices 1950 to 1999. (Author)

  12. Biodegradation testing of hydrophobic chemicals in mixtures at low concentrations – covering the chemical space of petroleum hydrocarbons

    DEFF Research Database (Denmark)

    Birch, Heidi; Hammershøj, Rikke Høst; Mayer, Philipp

    Petroleum products are complex mixtures of varying composition containing thousands of hydrocarbons each with their own physicochemical properties and degradation kinetics. One approach for risk assessment of these products is therefore to group the hydrocarbons by carbon number and chemical class...... i.e. hydrocarbon blocks. However, the biodegradation kinetic data varies in quantity and quality for the different hydrocarbon blocks, hampering the characterization of their fate properties. In this study, biodegradation kinetics of a large number of hydrocarbons aiming to cover the chemical space...... of petroleum hydrocarbons, were therefore determined at ng/L to µg/L concentrations in surface water, seawater and activated sludge filtrate. Two hydrocarbon mixtures were prepared, comprising a total of 53 chemicals including paraffins, naphthenics and aromatic hydrocarbons from C8 to C20. Passive dosing from...

  13. Southeast Asian oil markets and refining

    Energy Technology Data Exchange (ETDEWEB)

    Yamaguchi, N.D. [FACTS, Inc., Honolulu, Hawaii (United States)

    1999-09-01

    An overview of the Southeast Asian oil markets and refining is presented concentrating on Brunei, Malaysia, the Philippines, Singapore and Thailand refiners. Key statistics of the refiners in this region are tabulated. The demand and the quality of Indonesian, Malaysian, Philippine, Singapore and Thai petroleum products are analysed. Crude distillation unit capacity trends in the Southeastern Asian refining industry are discussed along with cracking to distillation ratios, refining in these countries, and the impact of changes in demand and refining on the product trade.

  14. Southeast Asian oil markets and refining

    International Nuclear Information System (INIS)

    Yamaguchi, N.D.

    1999-01-01

    An overview of the Southeast Asian oil markets and refining is presented concentrating on Brunei, Malaysia, the Philippines, Singapore and Thailand refiners. Key statistics of the refiners in this region are tabulated. The demand and the quality of Indonesian, Malaysian, Philippine, Singapore and Thai petroleum products are analysed. Crude distillation unit capacity trends in the Southeastern Asian refining industry are discussed along with cracking to distillation ratios, refining in these countries, and the impact of changes in demand and refining on the product trade

  15. Modeling and optimization of the european oil refining capacities and structures on the horizons 1995, 2000 and 2010

    International Nuclear Information System (INIS)

    Khebri, S.

    1993-04-01

    This thesis is a study on petroleum refining. In a first part, the author describes the existing refining processes and the structure of refining units, the structure of petroleum consumption and the interfaces with petroleum chemistry industry and gives a retrospect on world and european petroleum refining. In a second part, the author describes the models used to realize the simulation of supplies, market and refining scheme. Four scenarios are developed (conventional wisdom, driving into tensions, sustaining a high economic growth, high prices) and a forecasting on the horizons 1995, 2000 and 2010 is given. 54 refs

  16. Petroleum supply monthly, March 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-30

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas -- the United States (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided from other sources.

  17. Determinants of import demand for non-renewable energy (petroleum) products: Empirical evidence from Nigeria

    International Nuclear Information System (INIS)

    Adewuyi, Adeolu O.

    2016-01-01

    This study estimated determinants of import demand for refined petroleum products in Nigeria for the period 1984–2013. It employed the autoregressive distributed lag (ARDL) bounds test cointegration method and analysed both long-run and short-run determinants of import demand for total and specific petroleum products. In the long-run, aggregate and sectoral incomes are significant determinants of import of refined kerosene. Further, real effective exchange rate (REER), aggregate income (GDP), manufacturing sector's income, domestic energy production (DEP) and population growth rate (PGR) are drivers of import of refined motor spirit Moreover, REER, DEP and manufacturing sector's income are propellers of import of refined distillate fuel. Also, REER and total output of petroleum products are major drivers of total import of refined petroleum products. Short-run results show that previous period GDP, PGR and manufacturing and service sectors' incomes are determinants of import demand for refined kerosene. Moreover, REER, GDP, previous PGR and manufacturing sector's income exert significant effects on the import of refined motor spirit. Further, significant effects of REER, DEP, previous PGR, domestic output of the product and manufacturing and service sectors' incomes on the import demand for distillate fuel were found. Policy implications of the foregoing are articulated in the paper. - Highlights: •Long-run and short-run drivers of import demand for petroleum products were estimated. •kerosene import is income elastic, gasoline import is income and relative price inelastic. •Exchange rate policies may have diverse effects on import of various petroleum product. •Expanding market size has implication for import demand for petroleum product varieties. •Import demand for petroleum products responds differently to various sectoral incomes.

  18. Documentation of the petroleum market model (PMM). Appendix: Model developer's report

    International Nuclear Information System (INIS)

    1994-01-01

    The Office of Integrated Analysis and Forecasting (OIAF) is required to provide complete model documentation to meet the EIA Model Acceptance Standards. The EIA Model Documentation: Petroleum Market Model of the National Energy Modeling System provides a complete description of the Petroleum Market Model's (PMM) methodology, and relation to other modules in the National Energy Modeling System (NEMS). This Model Developer's Report (MDR) serves as an appendix to the methodology documentation and provides an assessment of the sensitivity of PMM results to changes in input data. The MDR analysis for PMM is performed by varying several sets of input variables one-at-a-time and examining the effect on a set of selected output variables. The analysis is based on stand-alone, rather than integrated, National Energy Modeling System (NEMS) runs. This means that other NEMS modules are not responding to PMM outputs. The PMM models petroleum refining and marketing. The purpose of the PMM is to project petroleum product prices, refining activities, and movements of petroleum into the United States and among domestic regions. In addition, the PMM estimates capacity expansion and fuel consumption in, the refining industry. The PMM is also used to analyze a wide variety of petroleum-related issues and policies, in order to foster better understanding of the petroleum refining and marketing industry and the effects of certain policies and regulations. The PMM simulates the operation of petroleum refineries in the United States, including the supply and transportation of crude oil to refineries, the regional processing of these raw materials into petroleum products, and the distribution of petroleum products to meet regional demands. The essential outputs of this model are product prices, a petroleum supply/demand balance, demands for refinery fuel use, and capacity expansion

  19. Canadian retail petroleum markets study

    International Nuclear Information System (INIS)

    Ervin, M.J.

    1998-02-01

    A retail petroleum market study was conducted to provide a comprehensive overview of the competitiveness of the downstream petroleum industry in Canada and to set a foundation for effective policy development. The downstream petroleum industry, which includes the petroleum refining and marketing sectors, faces a poor public image, competitive pressures from U.S. and offshore refiners, and a broad range of environmental challenges. In this study, 19 markets representing a wide range of conditions were chosen for a detailed review of outlet economics. A market-by-market and regional comparisons of key competitiveness indicators was made in order to identify market and regional competitive differences as potential issues or opportunities within the industry. The study also included a pump price/margin model and provided a general overview of the retail gasoline sub-sector in terms of infrastructure. A review of prices, margins and demand patterns over the past several years was also undertaken to show the relationship between consumer demand patterns and pump price fluctuations. The study presented 22 findings which led to several conclusions and recommendations regarding the competitiveness of Canada's petroleum marketing sector. Two of the key conclusions were that taxation is a significant factor in the price of retail gasoline (about 50 per cent) and that government intervention into petroleum marketing is likely to be a poor alternative to market-based regulation. 18 tabs., 37 figs

  20. Reference data about petroleum fiscality

    International Nuclear Information System (INIS)

    2006-01-01

    This paper explains the different taxes existing in France for the petroleum products (domestic tax on petroleum products, added-value tax), the share of taxes in the retail price, the differences with other European countries, the French Government fiscal receipts and budget. Some information forms are attached to this document and concern: the formation of fuel prices (upstream, refining and transport-distribution margins), the evolution of annual average transport-distribution margins, some reference data about world petroleum markets (supply and demand, prices, market data), and some reference data about the role of oil companies on the petroleum market. (J.S.)

  1. Analysis of petroleum oily sludge producing in petroleum field of Rio Grande do Norte, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Cicero de Souza; Lima, Regineide Oliveira; Silva, Edjane Fabiula Buriti da; Castro, Kesia Kelly Vieira de; Chiavone Filho, Osvaldo; Araujo, Antonio Souza de [Universidade Federal do Rio Grande do Norte (UFRN), RN (Brazil)

    2012-07-01

    In exploration and production of petroleum is generated solid waste different and components other. The petroleum oily sludge is a complex mix of components different (water, oil and solid). The petroleum oily sludge generally has other residues and is formed during production and operations, transport, storage and petroleum refining (atmospheric residue, vacuum residue and catalytic cracking residue). However, according to its origin, the compositions can be found quite varied for sludge. Observing the process steps production and refining is possible to locate its main sources and percentage contributions in terms of waste generation. The elemental analysis was performed with oily sludge from region and it showed different composition. For carbon element and hydrogen, small differences was observed, but for was observed greater differences for Oxygen element. The sludge has different inorganic and organic composition. The sludge from oil water separator (OWS) 2 showed a greater amount of oil (94.88%), this may indicate a residue of aggregate high for petroleum industry. In analysis of Saturates, Aromatics, Resins and Asphaltenes (SARA), the sludge from unloading showed amount high of saturates. The inorganic material separated from sludge was characterized and sludge from OWS 2 had high amount sulfur (41.57%). The sludge analyzed showed organic components high values, so it can be treated and reprocessed in process units petroleum industry. The analysis thermal degradation had a better setting for treated oily sludge. (author)

  2. Canadian Petroleum Products Inst. annual report, 1992

    International Nuclear Information System (INIS)

    1993-01-01

    The Canadian Petroleum Products Institute (CPPI) was created in 1989 as a nonprofit association of Canadian refiners and marketers of petroleum products. The objective of the CPPI is to serve and represent the refining and marketing sectors of the petroleum industry with respect to environment, health and safety, and business issues. CPPI conducts research to develop industry policy on a wide variety of environmental, health, safety and business issues. Key activities include: developing guidelines for the safe handling of petroleum products, establishing environmental policies, managing a national environmental protection network of over 100 centers across Canada; providing information on industry activities to the public; and developing working partnerships with government and public interest groups to address issues of common concern. An overview is provided of industry operations, economics and financial performance, and environmental protection and safety. Lists of CPPI publications, awards, standing committees, and officers are also included. 9 figs

  3. Selling petroleum to the military

    International Nuclear Information System (INIS)

    Uscher, R.H.

    1999-01-01

    This article examines what petroleum products and services the US military buys, the contracts awarded to Asian and European refiners for supplies outside the USA, and military specifications and test methods including the specifications of JP-8 battlefield fuel and the JP-8+100 additive package for military aircraft. The way in which the military buys petroleum products is described, and details are given of the types of military contracts, the bidding on Defense Energy Support Center (DESC) petroleum contracts, the performance of military petroleum contracts, socio-economic programmes, the Prompt Payment Act requiring contractors to be paid promptly, and procedures for claims and disputes

  4. Yugoslavian Petroleum Refinery development program

    International Nuclear Information System (INIS)

    Ocic, Ozren

    1999-01-01

    This paper shows the analysis of the world petroleum industry development, being an important factor in planning the development of the Yugoslav petroleum industry and Pancevo Petroleum Refinery, as well. Then Yugoslav petroleum industry development is analysed, including the appropriate balances of crude oil production and crude oil products consumption. The way of realizing the basic targets are also proposed. Likewise, the analysis of the condition within West European refineries has been conducted, from the aspects of technology, energy consumption and environmental protection and the same analysis for Pancevo Petroleum Refinery has been presented, too. The analysis of the condition within the refineries in the European Union countries and comparing it with the condition within Pancevo Petroleum Refinery, makes it mainly possible to recognize the development programmes which should be realized in order that Pancevo Petroleum Refinery could reach the refining level of the EU countries. (Original)

  5. The petroleum industry in 2003; L'industrie petroliere en 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This 2004 edition of the petroleum industry activities presents results and data concerning the crude oil prices evolution, the petroleum exploration and production in france and in the world, the para-petroleum industry, the hydrocarbons supplies, the refining, the quality evolution of the substitution products and fuels, the internal transports of petroleum products, the petroleum products storage, the petroleum products consumption, the petroleum products prices and taxation, the petroleum products distribution. (A.L.B.)

  6. Petroleum supply monthly, April 1990

    Energy Technology Data Exchange (ETDEWEB)

    None

    1990-06-26

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the Petroleum Supply Monthly describe (PSM) the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply.'' Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: (1) the Summary Statistics and (2) the Detailed Statistics.

  7. Petroleum products : part 1 - overview and prospects

    International Nuclear Information System (INIS)

    1996-01-01

    The petroleum products industry represents the downstream (refining and products marketing) portion of the oil industry. It includes companies that refine crude oil into petroleum products, transport them to distribution storage terminals and sell them directly to major users or wholesale and retail outlets. Issues regarding investment and financing, trade and export strategies, technological innovation and adaptation, human resources, the environment and sustainable development within the sector are discussed, illustrating, among other things, how government and industry can commit to mutually beneficial goals and actions. The petroleum industry is a major source of revenue for Canadian governments which collect about $9 billion annually in federal and provincial taxes on gasoline alone. The industry is capital-intensive and very competitive, with a strong domestic focus. Key points relevant to the sector are examined from the global, North American and Canadian perspectives, highlighting changing conditions and industry responses in both the refining and retailing segments of the sector. Growth prospects in terms of profitability and environmental issues were also analyzed. 11 figs

  8. French petroleum demand stable since thirteen years

    International Nuclear Information System (INIS)

    Chauvot, M.

    2005-01-01

    The French union of petroleum industries (Ufip) has presented a globally satisfactory status of the French petroleum situation. However, the refining capacities are not always well adapted to the evolution of the demand and the production of diesel fuels remains insufficient while France exports gasoline. Short paper. (J.S.)

  9. REDUCING POWER PRODUCTION COSTS BY UTILIZING PETROLEUM COKE

    Energy Technology Data Exchange (ETDEWEB)

    Kevin C. Galbreath; Donald L. Toman; Christopher J. Zygarlicke

    1999-09-01

    Petroleum coke, a byproduct of the petroleum-refining process, is an attractive primary or supplemental fuel for power production primarily because of a progressive and predictable increase in the production volumes of petroleum coke (1, 2). Petroleum coke is most commonly blended with coal in proportions suitable to meet sulfur emission compliance. Petroleum coke is generally less reactive than coal; therefore, the cofiring of petroleum coke with coal typically improves ignition, flame stability, and carbon loss relative to the combustion of petroleum coke alone. Although petroleum coke is a desirable fuel for producing relatively inexpensive electrical power, concerns about the effects of petroleum coke blending on combustion and pollution control processes exist in the coal-fired utility industry (3). The Energy & Environmental Research Center (EERC) completed a 2-year technical assessment of petroleum coke as a supplemental fuel. A survey questionnaire was sent to seven electric utility companies that are currently cofiring coal and petroleum coke in an effort to solicit specific suggestions on research needs and fuel selections. An example of the letter and survey questionnaire is presented in Appendix A. Interest was expressed by most utilities in evaluating the effects of petroleum coke blending on grindability, combustion reactivity, fouling, slagging, and fly ash emissions control. Unexpectedly, concern over corrosion was not expressed by the utilities contacted. Although all seven utilities responded to the question, only two utilities, Northern States Power Company (NSP) and Ameren, sent fuels to the EERC for evaluation. Both utilities sent subbituminous coals from the Power River Basin and petroleum shot coke samples. Petroleum shot coke is produced unintentionally during operational upsets in the petroleum refining process. This report evaluates the effects of petroleum shot coke blending on grindability, fuel reactivity, fouling/slagging, and

  10. Petroleum supply monthly, January 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-15

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  11. Petroleum supply monthly, October 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-26

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  12. Petroleum Supply Monthly, August 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-10-30

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) district movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics.

  13. Petroleum supply monthly, September 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-30

    The Petroleum Supply Monthly (PSM) is one of a family of three publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other two publications are the Weekly Petroleum Status Report (WPSR) and the Petroleum Supply Annual (PSA). Data presented in PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administrations for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics. 65 tabs.

  14. Future of French refining

    International Nuclear Information System (INIS)

    Calvet, B.

    1993-01-01

    Over recent years, the refining industry has had to grapple with a growing burden of environmental and safety regulations concerning not only its plants and other facilities, but also its end products. At the same time, it has had to bear the effects of the reduction of the special status that used to apply to petroleum, and the consequences of economic freedom, to which we should add, as specifically concerns the French market, the impact of energy policy and the pro-nuclear option. The result is a drop in heavy fuel oil from 36 million tonnes per year in 1973 to 6.3 million in 1992, and in home-heating fuel from 37 to 18 million per year. This fast-moving market is highly competitive. The French market in particular is wide open to imports, but the refining companies are still heavy exporters for those products with high added-value, like lubricants, jet fuel, and lead-free gasolines. The competition has led the refining companies to commit themselves to quality, and to publicize their efforts in this direction. This is why the long-term perspectives for petroleum fuels are still wide open. This is supported by the probable expectation that the goal of economic efficiency is likely to soften the effects of the energy policy, which penalizes petroleum products, in that they have now become competitive again. In the European context, with the challenge of environmental protection and the decline in heavy fuel outlets, French refining has to keep on improving the quality of its products and plants, which means major investments. The industry absolutely must return to a more normal level of profitability, in order to sustain this financial effort, and generate the prosperity of its high-performance plants and equipment. 1 fig., 5 tabs

  15. Petroleum industry in 2004; L'industrie petroliere en 2004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This document presents a detailed outlook of the petroleum industry in the world and more particularly in France in 2005: evolution of crude oil prices; petroleum exploration and production in the world and in France; the French para-petroleum and petroleum industry; the oil supplies; the refining activities; the evolution of products quality and the substitution fuels; the domestic transports, the storage and consumption of petroleum products; the fiscality, prices and distribution of petroleum products. (J.S.)

  16. Assessment Bioremediation of Contaminated Soils to Petroleum Compounds and Role of Chemical Fertilizers in the Decomposition Process

    Directory of Open Access Journals (Sweden)

    H. Parvizi Mosaed

    2013-06-01

    Full Text Available Today oil removal from contaminated soil by new methods such as bioremediation is necessary.  In this paper, the effect of chemical fertilizers and aeration on bioremediation of oil-contaminated soil has been investigated. Also the control group, (bioremediation of petroleum hydrocarbons in contaminated soil without treatment by chemical fertilizers and aeration treatment was examined. The condition of experiment is as following: those were treated 70 days in glass columns (30×30×30cm dimensions, ambient temperature (25-30 0C, relative humidity 70%, aeration operation with flow 0.7 lit/min.  The total number of heterotrophic bacteria of break down oil and the total of petroleum hydrocarbons were analyzed using gas chromatography analysis. all experiments were replicated three times. The microbial population results for control soil, treated soil by aeration and treated soil by aeration and chemical fertilizers columns are 2.3×105, 1.04×1010, and 1.14×1011 CFU/gr, respectively. The concentrations of total petroleum hydrocarbons of remaining are 46965, 38124, and 22187 mg kg-1respectively. The obtained results show that the aeration operation and chemical fertilizers have effective role on degradation of petroleum hydrocarbon by oil degrading bacteria from soil.

  17. Petroleum Market Model of the National Energy Modeling System. Part 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-18

    The purpose of this report is to define the objectives of the Petroleum Market Model (PMM), describe its basic approach, and provide detail on how it works. This report is intended as a reference document for model analysts, users, and the public. The PMM models petroleum refining activities, the marketing of petroleum products to consumption regions, the production of natural gas liquids in gas processing plants, and domestic methanol production. The PMM projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil, both domestic and imported; other inputs including alcohols and ethers; natural gas plant liquids production; petroleum product imports; and refinery processing gain. In addition, the PMM estimates domestic refinery capacity expansion and fuel consumption. Product prices are estimated at the Census division level and much of the refining activity information is at the Petroleum Administration for Defense (PAD) District level.

  18. Petroleum Supply Monthly, September 1990. [Contains glossary

    Energy Technology Data Exchange (ETDEWEB)

    Whited, D.; Jacobus, P. (eds.)

    1990-11-28

    Data presented in this PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 12 figs., 46 tabs.

  19. Petroleum supply monthly, October 1990. [Contains Glossary

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-27

    Data presented in this report describes the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. 12 figs., 54 tabs.

  20. The petroleum industry in 2002; L'industrie petroliere en 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This document presents the petroleum industry situation in 2002 on the following topics: the evolution of the crude oil prices, the world petroleum exploration and production, the french petroleum exploration and production, the para-petroleum industry, the supplies in hydrocarbons, the refining, the evolution of the products quality and the substitution fuels, the internal transportation of petroleum products, the petroleum products storage and the crisis management, the petroleum products consumption, the taxation of the petroleum products, the prices of the petroleum products, the distribution of the petroleum products. (A.L.B.)

  1. The petroleum industry in 2005; L'industrie petroliere en 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This document provides information on the petroleum industry for the year 2005. It discusses the world gas and petroleum markets, the world and french petroleum exploration and production, the petroleum and byproducts industry in France, the hydrocarbons supplying, the refining in France, the evolution of the products and fuels substitution quality, the internal transports of petroleum products, the storage consumption and taxes of petroleum products, the prices and distribution of the petroleum products. (A.L.B.)

  2. Investigating an effective supply chain for a refinery in a regulated petroleum sector

    Directory of Open Access Journals (Sweden)

    Chris Adendorf

    2012-12-01

    Full Text Available Currently, refined petroleum products are manufactured by six refineries in South Africa. The supply of refined petroleum products is supplemented by imports of refined petroleum products. These refined petroleum products are transported by pipeline, rail, road, sea and a combination thereof to depots across the country. These products are then distributed directly to commercial customers through points of resale in the form of retail service stations. The challenge is that the storage facilities and distribution networks in South Africa are currently utilised to its full capacity. There is a need to expand current storage infrastructure or to erect new storage facilities to facilitate imports. Durban Port that currently handles 70% of the country’s crude oil and 40% of refined products is also utilised to its full capacity. The investigated problem pertains to the limited storage and transport capacity available for the distribution of petroleum products in the country. The interview protocol, which was based on the literature reviewed, was used for compiling the primary data for the case study. Selected findings revealed that the respondents perceived that storage capacity is the most significant constraint militating against adequate supply by the supply chain. The findings also indicated that the respondents were of the opinion that transport rates and routes (cost of logistics are the greatest contributor to the prices of products. As a result, there appears to be a major scope for improvement in terms of the usage of pipelines and rails for the movement of petroleum products. Keywords: Petroleum products, storage facilities, supply chain, transportation, South African energy sector. Disciplines: civil engineering, architecture, business studies, energy studies

  3. Outlook for Canadian refining

    International Nuclear Information System (INIS)

    Boje, G.

    1998-01-01

    The petroleum supply and demand balance was discussed and a comparison between Canadian and U.S. refineries was provided. The impact of changing product specifications on the petroleum industry was also discussed. The major changes include sulphur reductions in gasoline, benzene and MMT additives. These changes have been made in an effort to satisfy environmental needs. Geographic margin variations in refineries between east and west were reviewed. An overview of findings from the Solomon Refining Study of Canadian and American refineries, which has been very complimentary of the Canadian refining industry, was provided. From this writer's point of view refinery utilization has improved but there is a threat from increasing efficiency of US competitors. Environmental issues will continue to impact upon the industry and while the chances for making economic returns on investment are good for the years ahead, it will be a challenge to maintain profitability

  4. Spanish Refining

    International Nuclear Information System (INIS)

    Lores, F.R.

    2001-01-01

    An overview of petroleum refining in Spain is presented (by Repsol YPF) and some views on future trends are discussed. Spain depends heavily on imports. Sub-headings in the article cover: sources of crude imports, investments and logistics and marketing, -detailed data for each are shown diagrammatically. Tables show: (1) economic indicators (e.g. total GDP, vehicle numbers and inflation) for 1998-200; (2) crude oil imports for 1995-2000; (3) oil products balance for 1995-2000; (4) commodities demand, by product; (5) refining in Spain in terms of capacity per region; (6) outlets in Spain and other European countries in 2002 and (7) sales distribution channel by product

  5. The petroleum industry in 2001; L'industrie petroliere en 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This economic analysis presents the 2001 highlights and key-data of the world petroleum industry: evolution of crude prices, exploration and production worldwide, petroleum exploration and production in France, para-petroleum industry, hydrocarbon supplies, refining activity, evolution of quality of products and fuel substitutes, domestic transports, storage, consumption, fiscality, prices and distribution of petroleum products. (J.S.)

  6. Petroleum exclusion under CERCLA: A defense to liability

    International Nuclear Information System (INIS)

    Landreth, L.W.

    1991-01-01

    When CERCLA was originally passed in 1980, the petroleum industry lobbied successfully to exclude the term open-quotes petroleumclose quotes from the definition of a CERCLA section 101 (14) hazardous substance. Under CERCLA section 101 (33), petroleum is also excluded from the definition of a open-quotes pollutant or contaminant.close quotes Exclusion from the designation as a defined hazardous substance has provided a defense to liability under CERCLA section 107 when the release of petroleum occurs. The scope of the petroleum exclusion under CERCLA has been a critical and recurring issue arising in the context of Superfund response activities. Specifically, oil that is contaminated by hazardous substances during the refining process is considered open-quotes petroleumclose quotes under CERCLA and thus excluded from CERCLA response authority and liability unless specifically listed under RCRA or some other statute. The U.S. EPAs position is that contaminants present in used oil, or any other petroleum substance, do not fall within the petroleum exclusion. open-quotes Contaminants,close quotes as discussed here, are substances not normally found in refined petroleum fractions or present at levels which exceed those normally found in such fractions. If these contaminants are CERCLA hazardous substances, they are subject to CERCLA response authority and liability. This paper discusses the parameters of the CERCLA open-quotes Petroleum Exclusion.close quotes It briefly examines selected state laws, RCRA, the Clean Water Act (CWA) and the Safe Drinking Water Act (SDWA) for treatment of petroleum and petroleum products. And, finally, this paper discusses new legislation regarding oil pollution liability and compensation

  7. Prospective of petroleum products 2002-2011

    International Nuclear Information System (INIS)

    2002-01-01

    This prospective provides a complete panorama of the requirements in the refining industry of Mexico at short, medium and long terms. Here subjects such as: fuels quality, historical and expected investments and prices, International situation of the installed refining capacity, the demand and regional balance of petroleum products at year 2001, the regulatory framework and the organization of the petroleum sector, the realized investments in the last nine years, Saving programs and efficient use of energy and the applicable regulations to this sector for its optimum use are treated. At the end of this book there are annexes with the abbreviations, acronyms and, conversion factors as well as the fundamental definitions. (Author)

  8. Petroleum: fate of mankind. [in German]. Oel - Schicksal der Menschheit

    Energy Technology Data Exchange (ETDEWEB)

    Konzelmann, G

    1976-01-01

    The author reports on the history, exploratio, exploitation, transport, and refining of petroleum, and on the policies in the petroleum business, concentrating on the oil-exporting countries. Many impressive color pictures supplement the text.

  9. Petroleum supply monthly, October 1991. [Contains glossary

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-30

    Data presented in this report describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in Primary Supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importer, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data are divided into two sections (1) the Summary Statistics and (2) the Detailed Statistics 14 figs., 56 tabs.

  10. Petroleum supply monthly, December 1995: With data for October 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. 16 figs., 6 tabs.

  11. Metallurgical engineering and inspection practices in the chemical process industries

    International Nuclear Information System (INIS)

    Moller, G.E.

    1987-01-01

    The process industries, in particular the petroleum refining industry, adopted materials engineering and inspection (ME and I) practices years ago and regularly updated them because they were faced with the handling and refining of flammable, toxic, and corrosive feed stocks. These industries have a number of nonproprietary techniques and procedures, some of which may be applicable in the nuclear power generation field. Some specific inspection and engineering techniques used by the process industries within the framework of the guidelines for inspections and worthy of detailed description include the following: (1) sentry drilling or safety drilling of piping subject to relatively uniform corrosion, such as feedwater heater piping, steam piping, and extraction steam piping; (2) on-stream radiography for thickness measurement and detection of unusual conditions - damaged equipment such as valve blockage; (3) critical analysis of the chemical and refining processes for the relative probability of corrosion; (4) communication of valuable experience within the industry; (5) on-stream ultrasonic thickness testing; and (6) on-stream and off-stream crack and flaw detection. The author, trained in the petroleum refining industry but versed in electric utilities, pulp and paper, chemical process, marine, mining, water handling, waste treatment, and geothermal processes, discusses individual practices of these various industries in the paper

  12. Bioremediation of petroleum contaminated soil using vegetation--A technology transfer project

    International Nuclear Information System (INIS)

    Banks, M.K.; Schwab, A.P.; Govindaraju, R.S.; Chen, Z.

    1994-01-01

    A common environmental problem associated with the pumping and refining of crude oil is the disposal of petroleum sludge. Unfortunately, the biodegradation fate of more recalcitrant and potentially toxic contaminants, such as the polynuclear aromatic hydrocarbons (PNAs), is rapid at first but declines quickly. Biodegradation of these compounds is limited by their strong adsorption potential and low solubility. Recent research has suggested that vegetation may play an important role in the biodegradation of toxic organic chemicals, such as PNAs, in soil. The establishment of vegetation on hazardous waste sites may be an economic, effective, low maintenance approach to waste remediation and stabilization. Completed greenhouse studies have indicated that vegetative remediation is a feasible method for clean-up of surface soil contaminated with petroleum products. However, a field demonstration is needed to exhibit this new technology to the industrial community. In this project, several petroleum contaminated field sites will be chosen in collaboration with three industrial partners. These sites will be thoroughly characterized for chemical properties, physical properties, and initial PNA concentrations. A variety of plant species will be established on the sites, including warm and cool season grasses and alfalfa. Soil analyses for the target compounds over time will allow them to assess the efficiency and applicability of this remediation method

  13. Natural gas in 1928: Petroleum in 1928. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, R B

    1931-12-31

    This annual report presents figures for gas consumption in Ontario, gas wells and their production, and leakage. It includes licenses issued for the year and logs of wells. Information is also given on oil production in Ontario, petroleum refining and petroleum imported into Ontario.

  14. Natural gas in 1935: Petroleum in 1935. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, R B

    1938-12-31

    This annual report presents figures for gas consumption in Ontario, gas wells and their production, and leakage. It includes licenses issued for the year and logs of wells. Information is also given on oil production in Ontario, petroleum refining and petroleum imported into Ontario.

  15. Natural gas in 1929: Petroleum in 1929. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, R B

    1931-12-31

    This annual report presents figures for gas consumption in Ontario, gas wells and their production, and leakage. It includes licenses issued for the year and logs of wells. Information is also given on oil production in Ontario, petroleum refining and petroleum imported into Ontario.

  16. The influence of calcination on the physical and chemical properties of petroleum and mixed cokes

    Energy Technology Data Exchange (ETDEWEB)

    Sikora, K; Syrek, H

    1980-01-01

    Freshly prepared petroleum and coal-petroleum cokes, before utilization for the production of various materials, are subjected to calcining--thermal treatment in a neutral or reducing atmosphere without the admission of air at less than or equal to 1400/sup 0/. During calcining, stabilization of the physical and chemical properties of the cokes takes place. The properties of the obtained coke depend chiefly on the calcining time and temperature. During calcining, volatile substances are removed almost completely from the coke; the coke density is increased, and its structure is put in order; the electrical conductivity is improved; the mechanical strength is increased; and the reactivity of the coke is decreased. Laboratory studies were conducted on calcining mixed coal-petroleum cokes of two grades at 1200, 1250, and 1300/sup 0/ for 2-6 h. In the calcining products the content of volatile substances, the ash content, S content, and density were determined. It was ascertained that calcining of mixed coal-petroleum cokes goes analogously to calcining of pure petroleum cokes. Raising the temperature and increasing the time of calcining has a substantial effect on improvement of coke physical and chemical properties. For high-quality coke, calcining is to be carried out at greater than or equal to 1300/sup 0/ for 4-6 h, for ordinary coke at > 1200/sup 0/ and greater than or equal to 4 h. The results are regarded as starting data for an industrial study of the calcining process.

  17. Environmental impact of petroleum products in the soil. Part II: Petroleum products composition and key properties

    International Nuclear Information System (INIS)

    Zerlia, T.

    2001-01-01

    The fate of petroleum hydrocarbons in the soil depends on the chemical-physic properties of each hydrocarbon, as well as on the soil characteristics. The mean composition of various petroleum products, the key chemical compounds and their characteristics are focused in order to outline the environmental behaviour of petroleum hydrocarbons in the soil [it

  18. Protein structure refinement using a quantum mechanics-based chemical shielding predictor

    DEFF Research Database (Denmark)

    Bratholm, Lars Andersen; Jensen, Jan Halborg

    2017-01-01

    The accurate prediction of protein chemical shifts using a quantum mechanics (QM)-based method has been the subject of intense research for more than 20 years but so far empirical methods for chemical shift prediction have proven more accurate. In this paper we show that a QM-based predictor...... of a protein backbone and CB chemical shifts (ProCS15, PeerJ, 2016, 3, e1344) is of comparable accuracy to empirical chemical shift predictors after chemical shift-based structural refinement that removes small structural errors. We present a method by which quantum chemistry based predictions of isotropic...

  19. Refining margins and prospects

    International Nuclear Information System (INIS)

    Baudouin, C.; Favennec, J.P.

    1997-01-01

    Refining margins throughout the world have remained low in 1996. In Europe, in spite of an improvement, particularly during the last few weeks, they are still not high enough to finance new investments. Although the demand for petroleum products is increasing, experts are still sceptical about any rapid recovery due to prevailing overcapacity and to continuing capacity growth. After a historical review of margins and an analysis of margins by regions, we analyse refining over-capacities in Europe and the unbalances between production and demand. Then we discuss the current situation concerning barriers to the rationalization, agreements between oil companies, and the consequences on the future of refining capacities and margins. (author)

  20. Refining's-clean new jingle

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that at a time when profit margins are slim and gasoline demand is down, the U.S. petroleum-refining industry is facing one of its greatest challenges; How to meet new federal and state laws for reformulated gasoline, oxygenated fuels, low-sulfur diesel and other measures to improve the environment. The American Petroleum Institute (API) estimates that industry will spend between $15 and $23 billion by the end of the decade to meet the U.S. Clean Air Act Amendments (CAAA) of 1990, and other legislation. ENSR Consulting and Engineering's capital-spending figure runs to between $70 and 100 billion this decade, including $24 billion to produce reformulated fuels and $10-12 billion to reduce refinery emissions. M.W. Kellogg Co. estimates that refiners may have to spend up to $30 billion this decade to meet the demand for reformulated gasoline. The estimates are wide-ranging because refiners are still studying their options and delaying final decisions as long as they can, to try to ensure they are the best and least-costly decisions. Oxygenated fuels will be required next winter, but federal regulations for reformulated gasoline won't go into effect until 1995, while California's tougher reformulated-fuels law will kick in the following year

  1. Protein structure refinement using a quantum mechanics-based chemical shielding predictor.

    Science.gov (United States)

    Bratholm, Lars A; Jensen, Jan H

    2017-03-01

    The accurate prediction of protein chemical shifts using a quantum mechanics (QM)-based method has been the subject of intense research for more than 20 years but so far empirical methods for chemical shift prediction have proven more accurate. In this paper we show that a QM-based predictor of a protein backbone and CB chemical shifts (ProCS15, PeerJ , 2016, 3, e1344) is of comparable accuracy to empirical chemical shift predictors after chemical shift-based structural refinement that removes small structural errors. We present a method by which quantum chemistry based predictions of isotropic chemical shielding values (ProCS15) can be used to refine protein structures using Markov Chain Monte Carlo (MCMC) simulations, relating the chemical shielding values to the experimental chemical shifts probabilistically. Two kinds of MCMC structural refinement simulations were performed using force field geometry optimized X-ray structures as starting points: simulated annealing of the starting structure and constant temperature MCMC simulation followed by simulated annealing of a representative ensemble structure. Annealing of the CHARMM structure changes the CA-RMSD by an average of 0.4 Å but lowers the chemical shift RMSD by 1.0 and 0.7 ppm for CA and N. Conformational averaging has a relatively small effect (0.1-0.2 ppm) on the overall agreement with carbon chemical shifts but lowers the error for nitrogen chemical shifts by 0.4 ppm. If an amino acid specific offset is included the ProCS15 predicted chemical shifts have RMSD values relative to experiments that are comparable to popular empirical chemical shift predictors. The annealed representative ensemble structures differ in CA-RMSD relative to the initial structures by an average of 2.0 Å, with >2.0 Å difference for six proteins. In four of the cases, the largest structural differences arise in structurally flexible regions of the protein as determined by NMR, and in the remaining two cases, the large structural

  2. Toxicology of oil field wastes. Hazards to livestock associated with the petroleum industry.

    Science.gov (United States)

    Edwards, W C

    1989-07-01

    In oil-producing states, the proximity of livestock to drilling operations and production sites often results in poisoning of animals from ingestion of crude oil, condensate, salt water, heavy metals, and caustic chemicals. The heavy metals encountered most frequently are lead from pipe joint compound and arsenicals and chromates used as corrosion inhibitors. Numerous toxic and caustic chemicals are used in drilling muds and fluids. Crude oil and salt water spills are common occurrences around production sites. Pipeline breaks may result in exposure of livestock to crude oil or refined petroleum hydrocarbons. Ingestion of petroleum hydrocarbons may result in sudden death from peracute bloat. The most common cause of illness or death following exposure to petroleum hydrocarbons is aspiration pneumonia, which may cause a chronic progressive deterioration of health, with death after several days or weeks. Cases in which livestock are exposed to oil, salt water, or caustic chemicals, but do not die acutely or from aspiration pneumonia are more frustrating to diagnose. In these cases, parasitism, poor nutrition, and other debilitating diseases must be considered. Anorexia, weight loss, and decreased rumen motility may be caused by a disruption of normal rumen function. Petroleum hydrocarbons, salt water, and caustic chemicals have the potential of altering rumen flora and enzymatic processes as well as damaging the ruminal and gastrointestinal epithelium. The toxicity of petroleum hydrocarbons appears to be related more closely to the volatility and viscosity of the product than to other factors. The more volatile straight chain and aromatic petroleum hydrocarbons have a greater potential for aspiration pneumonia and may produce an anesthetic-like action if absorbed systemically. The more volatile petroleum hydrocarbons also are more irritating to skin and mucous membranes and appear to be more damaging to rumen flora. Treatment of petroleum hydrocarbon ingestion is

  3. Industry sector analysis, Mexico: Annual petroleum report. Export Trade Information

    International Nuclear Information System (INIS)

    1992-01-01

    The comprehensive appraisal of the Mexican Petroleum industry was completed in July 1991. Some of the topics concerning the Mexican petroleum industry covered in the Annual Petroleum Report include: exploration efforts, oil reserves, pipelines, refining, finances, transportation, alternative energy sources, and others. The report also contains lists of petrochemicals produced in Mexico and extensive statistics on oil production and export prices

  4. Natural gas in 1946: Petroleum in 1946. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, R B

    1949-12-31

    Part III of the annual report consists of two separate reports: Natural gas and petroleum. The natural gas report discusses production and distribution, changes and improvements; consumption and rates; gas wells and their production; and licenses issued. The logs of wells are also included, being presented alphabetically by counties, townships, and owners, respectively. The petroleum report presents information on production and drilling by township; expansion; and petroleum importation and refining operations.

  5. Natural gas in 1934: Petroleum in 1934. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, R B

    1937-12-31

    Part V of this annual report consists of two separate reports: Natural gas and petroleum. The natural gas report discusses production and distribution; changes and improvements; consumption and rates; gas wells and their production; and licenses issued. The logs of wells are also included, being presented alphabetically by counties, townships, and owners, respectively. The petroleum report presents information on production and drilling by township; expansion; and petroleum importation and refining operations.

  6. Natural gas in 1949: Petroleum in 1949. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1952-12-31

    Part III of the annual report consists of two separate reports: Natural gas and petroleum. The natural gas report discusses production and distribution, changes and improvements; consumption and rates; gas wells and their production; and licenses issued. The logs of wells are also included, being presented alphabetically by counties, townships, and owners, respectively. The petroleum report presents information on production and drilling by township; expansion; and petroleum importation and refining operations.

  7. Natural gas in 1937: Petroleum in 1937. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, R B

    1940-12-31

    Part V of this annual report consists of two separate reports, natural gas and petroleum. The natural gas report discusses production and distribution; changes and improvements; consumption and rates; gas wells and their production; and licenses issued. The logs of wells are also included, presented alphabetically by counties, townships, and owners, respectively. The petroleum report presents information on production and drilling by township; expansion; and petroleum importation and refining operations.

  8. Natural gas in 1939: Petroleum in 1939. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, R B

    1942-12-31

    Part V of this annual report consists of two separate reports, natural gas and petroleum. The natural gas report discusses production and distribution; changes and improvements; consumption and rates; gas wells and their production; and licenses issued. The logs of wells are also included, presented alphabetically by counties, townships, and owners, respectively. The petroleum report presents information on production and drilling by township; expansion; and petroleum importation and refining operations.

  9. Natural gas in 1948: Petroleum in 1948. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, R B

    1951-12-31

    Part III of the annual report consists of two separate reports: Natural gas and petroleum. The natural gas report discusses production and distribution, changes and improvements; consumption and rates; gas wells and their production; and licenses issued. The logs of wells are also included, being presented alphabetically by counties, townships, and owners, respectively. The petroleum report presents information on production and drilling by township; expansion; and petroleum importation and refining operations.

  10. Natural gas in 1943: Petroleum in 1943. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, R B

    1946-12-31

    Part V of this annual report consists of two separate reports: Natural gas and petroleum. The natural gas report discusses production and distribution; changes and improvements; consumption and rates; gas wells and their production; and licenses issued. The logs of wells are also included, being presented alphabetically by counties, townships, and owners, respectively. The petroleum report presents information on production and drilling by township; expansion; and petroleum importation and refining operations.

  11. Natural gas in 1940: Petroleum in 1940. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Crozier, A R

    1944-12-31

    Part V of this annual report consists of two separate reports: Natural gas and petroleum. The natural gas report discusses production and distribution; changes and improvements; consumption and rates; gas wells and their production; and licenses issued. The logs of wells are also included, being presented alphabetically by counties, townships, and owners, respectively. The petroleum report presents information on production and drilling by township; expansion; and petroleum importation and refining operations.

  12. Natural gas in 1941: Petroleum in 1941. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Crozier, A R

    1945-12-31

    Part V of this annual report consists of two separate reports: Natural gas and petroleum. The natural gas report discusses production and distribution; changes and improvements; consumption and rates; gas wells and their production; and licenses issued. The logs of wells are also included, being presented alphabetically by counties, townships, and owners, respectively. The petroleum report presents information on production and drilling by township; expansion; and petroleum importation and refining operations.

  13. Petroleum supply monthly with data from January 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  14. Petroleum supply monthly with data for March 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  15. EIA model documentation: Petroleum market model of the national energy modeling system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-28

    The purpose of this report is to define the objectives of the Petroleum Market Model (PMM), describe its basic approach, and provide detail on how it works. This report is intended as a reference document for model analysts, users, and the public. Documentation of the model is in accordance with EIA`s legal obligation to provide adequate documentation in support of its models. The PMM models petroleum refining activities, the marketing of petroleum products to consumption regions, the production of natural gas liquids in gas processing plants, and domestic methanol production. The PMM projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil, both domestic and imported; other inputs including alcohols and ethers; natural gas plant liquids production; petroleum product imports; and refinery processing gain. In addition, the PMM estimates domestic refinery capacity expansion and fuel consumption. Product prices are estimated at the Census division level and much of the refining activity information is at the Petroleum Administration for Defense (PAD) District level.

  16. EIA model documentation: Petroleum market model of the national energy modeling system

    International Nuclear Information System (INIS)

    1995-01-01

    The purpose of this report is to define the objectives of the Petroleum Market Model (PMM), describe its basic approach, and provide detail on how it works. This report is intended as a reference document for model analysts, users, and the public. Documentation of the model is in accordance with EIA's legal obligation to provide adequate documentation in support of its models. The PMM models petroleum refining activities, the marketing of petroleum products to consumption regions, the production of natural gas liquids in gas processing plants, and domestic methanol production. The PMM projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil, both domestic and imported; other inputs including alcohols and ethers; natural gas plant liquids production; petroleum product imports; and refinery processing gain. In addition, the PMM estimates domestic refinery capacity expansion and fuel consumption. Product prices are estimated at the Census division level and much of the refining activity information is at the Petroleum Administration for Defense (PAD) District level

  17. Studies on the origin and transformation of selenium and its chemical species along the process of petroleum refining

    Science.gov (United States)

    Stivanin de Almeida, Cibele M.; Ribeiro, Anderson S.; Saint'Pierre, Tatiana D.; Miekeley, Norbert

    2009-06-01

    Inductively coupled plasma optical emission spectrometry and mass spectrometry (ICPMS), the latter hyphenated to flow injection hydride generation, electrothermal vaporization or ion chromatography, have been applied to the chemical characterization of crude oil, aqueous process stream samples and wastewaters from a petroleum refinery, in order to get information on the behavior of selenium and its chemical species along effluent generation and treatment. Multielemental characterization of these effluents by ICPMS revealed a complex composition of most of them, with high salinity and potential spectral and non-spectral interferents present. For this reason, a critical re-assessment of the analytical techniques for the determination of total selenium and its species was performed. Methane was employed as gas in dynamic reaction cell ICPMS and cell parameters were optimized for a simulated brine matrix and for diluted aqueous solutions to match the expected process and treated wastewaters samples. The signal-to-background ratios for 78Se and 80Se were used as criteria in optimization, the first isotope resulting in better detection limits for the simulated brine matrix ( 78Se: 0.07 μg L - 1 , 80Se: 0.31 μg L - 1 ). A large variability in the concentration of selenium (from crude oil samples in the refinery here investigated, which may explain the pronounced concentrations changes of this element measured in aqueous process stream and wastewater samples. Highest concentrations of total selenium were analyzed in samples from the hydrotreater (up to about 1800 μg L - 1 ). The predominance of selenocyanate (SeCN -) was observed in most of the wastewaters so far investigated, but also other species were detected with retention times different from Se(IV), Se(VI) and SeCN -. Colloidal selenium (Se 0) was the only Se-species observed in samples from the atmospheric distillation unit, but was also identified in other samples, most probably formed by the decomposition of

  18. Energy Saving Separations Technologies for the Petroleum Industry: An Industry-University-National Laboratory Research Partnership

    Energy Technology Data Exchange (ETDEWEB)

    Dorgan, John R.; Stewart, Frederick F.; Way, J. Douglas

    2003-03-28

    This project works to develop technologies capable of replacing traditional energy-intensive distillations so that a 20% improvement in energy efficiency can be realized. Consistent with the DOE sponsored report, Technology Roadmap for the Petroleum Industry, the approach undertaken is to develop and implement entirely new technology to replace existing energy intensive practices. The project directly addresses the top priority issue of developing membranes for hydrocarbon separations. The project is organized to rapidly and effectively advance the state-of-the-art in membranes for hydrocarbon separations. The project team includes ChevronTexaco and BP, major industrial petroleum refiners, who will lead the effort by providing matching resources and real world management perspective. Academic expertise in separation sciences and polymer materials found in the Chemical Engineering and Petroleum Refining Department of the Colorado School of Mines is used to invent, develop, and test new membrane materials. Additional expertise and special facilities available at the Idaho National Engineering and Environmental Laboratory (INEEL) are also exploited in order to effectively meet the goals of the project. The proposed project is truly unique in terms of the strength of the team it brings to bear on the development and commercialization of the proposed technologies.

  19. The chemical industry of Ukraine

    International Nuclear Information System (INIS)

    Novikov, I.N.

    1995-01-01

    This work deals with the chemical industry of Ukraine and more particularly with the restructuring proposed by the Ministry of Industry. After having presented some generalities the author focuses on the restructuring programme which includes the improvement of the fertilizers supply for agriculture, the development of facilities for basic organic synthesis, the increase of petroleum based chemicals production, the increase of consumer products production and the reorientation of the chemical industry to more accessible and alternative sources of raw materials such as black and brown coal, oil shale, coke, oil-refining gases, plant raw materials... (O.L.)

  20. Petroleum Market Model of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    The purpose of this report is to define the objectives of the Petroleum Market Model (PMM), describe its basic approach, and provide detail on how it works. This report is intended as a reference document for model analysts, users, and the public. The PMM models petroleum refining activities, the marketing of petroleum products to consumption regions. The production of natural gas liquids in gas processing plants, and domestic methanol production. The PMM projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil, both domestic and imported; other inputs including alcohols and ethers; natural gas plant liquids production; petroleum product imports; and refinery processing gain. In addition, the PMM estimates domestic refinery capacity expansion and fuel consumption. Product prices are estimated at the Census division level and much of the refining activity information is at the Petroleum Administration for Defense (PAD) District level. This report is organized as follows: Chapter 2, Model Purpose; Chapter 3, Model Overview and Rationale; Chapter 4, Model Structure; Appendix A, Inventory of Input Data, Parameter Estimates, and Model Outputs; Appendix B, Detailed Mathematical Description of the Model; Appendix C, Bibliography; Appendix D, Model Abstract; Appendix E, Data Quality; Appendix F, Estimation methodologies; Appendix G, Matrix Generator documentation; Appendix H, Historical Data Processing; and Appendix I, Biofuels Supply Submodule.

  1. Petroleum Market Model of the National Energy Modeling System

    International Nuclear Information System (INIS)

    1997-01-01

    The purpose of this report is to define the objectives of the Petroleum Market Model (PMM), describe its basic approach, and provide detail on how it works. This report is intended as a reference document for model analysts, users, and the public. The PMM models petroleum refining activities, the marketing of petroleum products to consumption regions. The production of natural gas liquids in gas processing plants, and domestic methanol production. The PMM projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil, both domestic and imported; other inputs including alcohols and ethers; natural gas plant liquids production; petroleum product imports; and refinery processing gain. In addition, the PMM estimates domestic refinery capacity expansion and fuel consumption. Product prices are estimated at the Census division level and much of the refining activity information is at the Petroleum Administration for Defense (PAD) District level. This report is organized as follows: Chapter 2, Model Purpose; Chapter 3, Model Overview and Rationale; Chapter 4, Model Structure; Appendix A, Inventory of Input Data, Parameter Estimates, and Model Outputs; Appendix B, Detailed Mathematical Description of the Model; Appendix C, Bibliography; Appendix D, Model Abstract; Appendix E, Data Quality; Appendix F, Estimation methodologies; Appendix G, Matrix Generator documentation; Appendix H, Historical Data Processing; and Appendix I, Biofuels Supply Submodule

  2. Rare and expensive petroleum: impact on careers

    International Nuclear Information System (INIS)

    Thomas, E.; Krasowski, T.; Kerdraon, Y.; Drevet, R.; Andreis, D.; Pouille, J.P.; Villoslada Prado, P.; Sigaud, J.B.

    2006-01-01

    Oil peak, reserves depletion, greenhouse effect, pollution, uncertain future and international insecurity could be negative arguments to discourage candidates to start up a career in the petroleum industry. This press kit presents testimonies of young professionals who explain their motivations for committing themselves in this way. Testimonies are chosen in various domains of the petroleum industry: geophysics, exploration, processes, refining, and engines technology. (J.S.)

  3. Natural gas in 1924 and petroleum in 1924. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, R B

    1927-12-31

    This annual report presents figures for gas consumption in Ontario, gas wells and their production, and leakage. It includes licenses issued for the year and logs of wells. Information is also given on oil production in Ontario, petroleum refining and petroleum imported into Ontario.

  4. Natural gas in 1925 and petroleum in 1925. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, R B

    1927-12-31

    This annual report presents figures for gas consumption in Ontario, gas wells and their production, and leakage. It includes licenses issued for the year and logs of wells. Information is also given on oil production in Ontario, petroleum refining and petroleum imported into Ontario.

  5. Natural gas in 1923 and petroleum in 1923. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, R B

    1926-12-31

    This annual report presents figures for gas consumption in Ontario, gas wells and their production, and leakage. It includes licenses issued for the year and logs of wells. Information is also given on oil production in Ontario, petroleum refining and petroleum imported into Ontario.

  6. Petroleum industry in 1992

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This book analyses the major facts and the numbers of 1992, in France and in foreign countries. Its purpose is to be as complete as possible and to present especially all the aspects on a national level: supply, domestic market, prices, exploration, production, stocks, petroleum refining, transports, retailing, financial data

  7. Petroleum supply monthly, July 1999, with data for May 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    The Petroleum Supply Monthly (PSM) is one of a family of four petroleum supply publications produced by the Petroleum Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The Detail Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and the District of Columbia), five PAD Districts, and 12 Refining Districts. At the US and PAD District level, the total volume and the daily rate of activities are presented. The statistics are developed from monthly survey forms submitted by respondents to the EIA and from data provided from other sources.

  8. Petroleum supply monthly, April 1998, with data for February 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. Most time series include preliminary estimates for one month based on the Weekly Petroleum Supply Reporting System; statistics based on the most recent data from the Monthly Petroleum Supply Reporting System (MPSRS); and statistics published in prior issues of the PSM and PSA. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. In most cases, the statistics are presented for several geographic areas--the US (50 States and District of Columbia), 5 PAD Districts and 12 Refining Districts. 16 figs., 56 tabs.

  9. Oil industry consolidation and refined product prices. Evidence from US wholesale gasoline terminals

    International Nuclear Information System (INIS)

    Kendix, Michael; Walls, W.D.

    2010-01-01

    Our objective in this paper is to quantify the impact of petroleum industry consolidation on refined product prices, controlling for other important factors that could also impact prices. Our empirical analysis focuses on the US petroleum refining industry using data on industry consolidation and wholesale gasoline prices collected over the interval 2000-2008. We match refinery units to wholesale city-terminal gasoline markets, and then estimate pooled cross-section time-series regressions to quantify the impact of petroleum industry consolidation on wholesale gasoline prices at city-specific terminals. The results of the empirical analysis of mergers are mixed, showing that some petroleum industry mergers resulted in statistically significant increases in refined product prices; others resulted in statistically significant declines and still others had no statistical impact at all. Our analysis of the effects of measures of market concentration - one at the level of city-specific wholesale terminals and another at the level of regional spot markets - found evidence that less concentrated markets are associated with lower price levels. (author)

  10. The installation IGCC power plans in the petroleum refinement: international experiences and lessons for Mexico; La instalacion de plantas IGCC en la refinacion de petroleo: experiencias internacionales y lecciones para Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, Joel [Ecole du Petrole et des Moteurs, Institut Franzais du Petrole, (France)

    2004-06-15

    In this work, are presented the technical and economic elements of the international experience for the installation of IGCC power plants in the petroleum refinement and the lessons for Mexico in the installation of this technology in PEMEX Refinacion are analyzed. The construction of IGCC power plants in the petroleum refinement has grown 14.3 % at worldwide level as of 1996, in which there was already an installed capacity of 160 MW. At the end of 2003 an installed capacity of 2,500 MW was reached. The growth in the installation of IGCC power plants fundamentally appears in Europe, being Italy and Spain leader countries in the construction of this technology in the petroleum refinement. However, countries like Holland, Japan, Singapore and the United States count on IGCC power plants for electricity and hydrogen generation, which take advantage of low value fuels such as vacuum tower residues, petroleum coke, asphalt, liquid fuels, among others. In Mexico, the installation IGCC power plants in the petroleum refinement is null, nevertheless Petroleos Mexicanos counts with the approval of the government for the installation of cogeneration power plants in its facilities. This approval would allow PEMEX to carry out projects for the installation IGCC power plants, specifically in PEMEX Refinacion, for the generation of electricity and hydrogen from the advantage of heavy residues of low economic value. The opportunity that the installation IGCC power plants in the petroleum refinement offers is directed towards the commercialization of the electricity and hydrogen, which would impel PEMEX Refinacion to enter the competition of the electrical market in Mexico. [Spanish] En este trabajo, se presentan los elementos tecnicos y economicos de la experiencia internacional para la instalacion de plantas IGCC en la refinacion de petroleo y se analizan las lecciones para Mexico en la instalacion de esta tecnologia en PEMEX Refinacion. La construccion de plantas IGCC en la

  11. About petroleum-chemical soil pollution and their ecological consequences

    International Nuclear Information System (INIS)

    Faizov, K.Sh; Asanbaev, I.K.

    1997-01-01

    It is reported, that in Kazakhstan 20-25 million t of petroleum have mined every year, 90 % of them are in desert areas of Atyrau and Mangistau regions. There are 160 petroleum and gas deposits on different rate of mastering. In near-time outlook the mastering of richest petroleum stocks in the Caspian Sea shelf zone (3.5 billion t) and the Perm oils is planned, area of petroleum-gas regions will be increased up to 1,7 million km 2 , petroleum production will be increased to up 70 million t in 2010. Influence of pollution by petroleum on genetic properties of soils and its ecological consequences as well as issues of rehabilitation of polluted soils with help carbon-oxidation microorganisms are considered. It is reported, that there are cultures of microbes-destructors for hydrocarbon raw materials are able effectively to utilize raw petroleum, gasoline and diesel fuel (up 94-98 %) recommended by Kazakhstan microbiologists. The Munajbak microbe preparation for water and soil purification is able to utilize petroleum on 31-36 %

  12. Petroleum supply monthly, March 1995 with data for January 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-30

    Data presented in this report for March 1995, describes the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  13. Petroleum supply monthly - with data for May 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. This document contains a glossary.

  14. Petroleum supply monthly with data from April 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.

  15. Climate change issue table : petroleum downstream sector industry foundation paper

    International Nuclear Information System (INIS)

    Crandall, G.R.; Kelly, S.J.; Kromm, R.B.; Prime, M.G.

    1999-01-01

    An analysis of the impact of the Kyoto Protocol on the Canadian downstream petroleum industry is presented. The downstream sector includes petroleum refining, plus all activities regarding distribution, marketing and retailing of petroleum products. In 1990, the carbon dioxide (CO 2 ) emissions resulting from the production and consumption of petroleum products were about 207 megatons which is about 45 per cent of total Canadian CO 2 emissions. This report includes the analysis of the Base Case and the Kyoto Case. The Base Case is premised on the implementation of fuel sulphur reductions to meet cleaner fuels requirements and an enhanced program of refinery efficiency initiatives. Under the Base Case assumptions the CO 2 emissions from refinery operations in 2010 would be about 3.4 below 1990 levels. The Kyoto Case was developed on the basis of reductions in Canadian petroleum product demand that would be sufficient to achieve a 6 per cent reduction in GHG emissions from the production and consumption of petroleum products relative to 1990 levels. The model demonstrates the dramatic economic impact of the Kyoto Case reductions on the Canadian downstream petroleum sector. Investment requirements for capital improvements to further distillate production and to further desulphurization are estimated at $ 1.5 billion between 2005 and 2015. The reduced volume of gasoline sales would be expected to result in rationalization of retail outlets, resulting in the closure of some 2,000 retail outlets with a combined loss of about 12,000 jobs. It is suggested that similar impact in other countries that are signatory to the Kyoto Protocol could result in the shift of refining, refining industry jobs and related economic benefits to countries which are not participants in the Kyoto Protocol. 14 tabs., 6 figs., 5 appendices

  16. Energy use in petroleum refineries

    Energy Technology Data Exchange (ETDEWEB)

    Haynes, V.O.

    1976-09-01

    Refining petroleum accounts for about 4 percent of the total energy consumed in the United States and about 15 percent of all industrial consumption. The kinds of energy used and the manner in which energy is used are discussed on a process-by-process basis. Emphasis is placed on existing processes to identify and quantify process and equipment substitutions which might significantly conserve energy. General industry and process information is given and estimates of potential savings are made. A few research and development opportunities are identified and nontechnical factors are discussed. Nearly one-half the energy consumed by refineries is obtained from by-product refinery gas and coke, and about one-third is supplied by natural gas. On a regional basis, refineries were found to vary by a factor of two in the amount of energy used to refine a unit of crude oil. Refineries in regions traditionally abundant in inexpensive natural gas were found to use relatively more natural gas and energy. About 36 percent of the energy used by petroleum refineries is consumed in the distillation units to separate the refinery streams into their basic components. Including energy for manufacturing hydrogen, about 24 percent of the total is used for cracking of the heavier components. Most of the remainder is used for reforming, hydrogen treating, and alkylation, distributed about 11, 17, and 6 percent respectively. Potential energy savings discussed in this report total 61 x 10/sup 13/ Btu/yr based on 1974 capacities, a figure which represents about 20 percent of the energy consumed to refine petroleum.

  17. Refining capacity in Quebec : the Quebec market, industry viewpoint

    International Nuclear Information System (INIS)

    Trudelle, F.

    2004-01-01

    Canada's second largest oil refinery is operated by Ultramar Ltd. in Levis, Quebec. The refinery, which supplies 45 per cent of all Quebec's petroleum, distributes its products to Quebec, Ontario and the Maritime provinces. The refinery currently produces 215,000 barrels per day. Ultramar is a division of Valero, an American firm which has a total refining capacity of 2.4 million barrels per day. A summary of the company's petroleum energy distribution, consumption, and reserves was presented and compared with the national and global position. It was noted that world demand for petroleum products increases yearly by 1 to 1.5 per cent while the demand for automobile fuel in North America increases by 2.5 to 3.5 per cent. In the last 10 years, world demand has increased by more than 22 per cent but refining capacity has only increased by 12 per cent. The average profitability of the refining industry from 1992 to 2002 was approximately 5.5 per cent, which limited investments in new refinery installations. Much of the industry's profits have been utilized to modify installations in order to reduce the sulphur content in gasoline and diesel fuels. Furthermore, the obtention of permits to construct new refining installations has become a major obstacle and the ratification of the Kyoto Protocol may signify a 30 per cent reduction in automotive fuel demand. Given this, there is currently some hesitation and uncertainty by the refining industry to proceed with new major installations. tabs., figs

  18. A method of refining aromatic hydrocarbons from coal chemical production

    Energy Technology Data Exchange (ETDEWEB)

    Zieborak, K.; Koprowski, A.; Ratajczak, W.

    1979-10-01

    A method is disclosed for refining aromatic hydrocarbons of coal chemical production by contact of liquid aromatic hydrocarbons and their mixtures with a strongly acid macroporous sulfocationite in the H-form at atmospheric pressure and high temperature. The method is distinguished in that the aromatic hydrocarbons and their mixtures, from which alkali compounds have already been removed, are supplied for refinement with the sulfocationite with simultaneous addition of olefin derivatives of aromatic hydrocarbons, followed by separation of pure hydrocarbons by rectification. Styrene or alpha-methylstyrene is used as the olefin derivatives of the aromatic hydrocarbons. The method is performed in several stages with addition of olefin derivatives of aromatic hydrocarbons at each stage.

  19. Petroleum and natural gas economy in Arab Countries, in Angola, Iran, Nigeria, Tanzania and Zaire

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This paper gives informations on petroleum and natural gas industry, petroleum market and prices, trade and contracts, prospection and production. The possible return of Iraq on the petroleum market has an influence on petroleum prices. In Algeria, Sonatrach will deliver 2.5 milliards m 3 to Portugal through the Maghreb-Europe gas pipeline. In Tunisia, a petroleum exploration permit has been attributed to Atlantic Richfield Company and Miskar natural gas field would come into production in 1995. In Saudi Arabia, Saudi Aramco has bought all the petroleum refining and distribution interests of the Saudi Arabian Marketing and Refining Company and Petromin Company and now Saudi Aramco is become a national integrated petroleum company. Petroleum exploration is going on in Caspian sea (Iran), six new oil fields have come into production in the Deir ez-Zor and Ash Sham permits (Syria) and petroleum exploration contracts have been signed in Angola, Nigeria and Zaire. In Egypt, the growth of natural gas consumption gives an indication upon the future growing deficit

  20. Demand and supply of hydrogen as chemical feedstock in USA

    Science.gov (United States)

    Huang, C. J.; Tang, K.; Kelley, J. H.; Berger, B. J.

    1979-01-01

    Projections are made for the demand and supply of hydrogen as chemical feedstock in USA. Industrial sectors considered are petroleum refining, ammonia synthesis, methanol production, isocyanate manufacture, edible oil processing, coal liquefaction, fuel cell electricity generation, and direct iron reduction. Presently, almost all the hydrogen required is produced by reforming of natural gas or petroleum fractions. Specific needs and emphases are recommended for future research and development to produce hydrogen from other sources to meet the requirements of these industrial sectors. The data and the recommendations summarized in this paper are based on the Workshop 'Supply and Demand of Hydrogen as Chemical Feedstock' held at the University of Houston on December 12-14, 1977.

  1. Government subsidies and demand for petroleum products in Iran

    International Nuclear Information System (INIS)

    Salehi-Isfahani, D.

    1996-08-01

    Like most other petroleum-exporting countries Iran subsidizes domestic consumption of refined products. Real product prices have declined for the past 25 years while the rest of the world has adjusted to higher energy prices. In this paper I describe the market for petroleum products in Iran and estimate demand functions for the four main refined petroleum products. My results indicate that price elasticities of demand are larger than previously thought. Particular attention is paid to the kerosene market where price subsidy is the largest, and where rationing in the 1980s requires taking into account the working of the black market. The results indicate that price increases can stem the rise in consumption. Forecasts show that, allowing for modest economic growth, increases that bring domestic prices to the level of world prices in fifteen years, will stabilize consumption at its current level. But increases that merely keep real prices constant will double consumption in the same period. This is significant in light of the fact that Iran's production capacity has stayed constant in the last five years and exports are under increasing pressure from domestic consumers of refined products. (UK)

  2. Trends in heavy oil production and refining in California

    International Nuclear Information System (INIS)

    Olsen, D.K.; Ramzel, E.B.; Pendergrass, R.A. II.

    1992-07-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil production and is part of a study being conducted for the US Department of Energy. This report summarizes trends in oil production and refining in Canada. Heavy oil (10 degrees to 20 degrees API gravity) production in California has increased from 20% of the state's total oil production in the early 1940s to 70% in the late 1980s. In each of the three principal petroleum producing districts (Los Angeles Basin, Coastal Basin, and San Joaquin Valley) oil production has peaked then declined at different times throughout the past 30 years. Thermal production of heavy oil has contributed to making California the largest producer of oil by enhanced oil recovery processes in spite of low oil prices for heavy oil and stringent environmental regulation. Opening of Naval Petroleum Reserve No. 1, Elk Hills (CA) field in 1976, brought about a major new source of light oil at a time when light oil production had greatly declined. Although California is a major petroleum-consuming state, in 1989 the state used 13.3 billion gallons of gasoline or 11.5% of US demand but it contributed substantially to the Nation's energy production and refining capability. California is the recipient and refines most of Alaska's 1.7 million barrel per day oil production. With California production, Alaskan oil, and imports brought into California for refining, California has an excess of oil and refined products and is a net exporter to other states. The local surplus of oil inhibits exploitation of California heavy oil resources even though the heavy oil resources exist. Transportation, refining, and competition in the market limit full development of California heavy oil resources

  3. Real-Time Dispatch of Petroleum Tank Trucks

    OpenAIRE

    Brown, Gerald G.; Graves, Glenn W.

    1981-01-01

    Management Science, 27, 1, pp. 19-32. (1982 International Management Science Achievement Award Finalist). A highly automated, real-time dispatch system is described which uses embedded optimization routines to replace extensive manual operations and to reduce substantially operating costs for a nation-wide fleet of petroleum tank trucks. The system is currently used in daily operations by the Order Entry and Dispatch segment of the Chevron U.S.A. Marketing System. Refined petroleum produ...

  4. Para-petroleum industry. International context and results of the 2004 French inquiry

    International Nuclear Information System (INIS)

    2004-01-01

    This document makes a brief overview of the international petroleum context, and then presents the results of the last inquiry allowing to precise the situation of the French para-petroleum industry in 2003 and to propose some estimations for 2004 according to the data supplied by companies. Content: 1 - international context: exploration-production (investments, investments evolution since 25 years, geophysics sector, drilling sector, sector of construction of offshore production equipments, regional analysis in the exploration-production domain, conclusions), refining and petrochemistry (economic context, refining industry, petrochemical industry, conclusions); 2 - the French para-petroleum industry: evolution of the global turnover, turnover share by sector of activity, offshore activity, foreign activity, manpower, conclusions. (J.S.)

  5. Petroleum supply monthly, December 1998 with data for October 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. 82 tabs.

  6. Petroleum products price interactions on the world markets: an econometric analysis

    International Nuclear Information System (INIS)

    Maack, Laetitia de; Lantz, Frederic

    2012-09-01

    This study examines the relationship between crude oil and petroleum products prices in the European, Asian and North American markets. We develop an econometric model, based on the long term equilibrium between the prices, which takes into account the changes in the oil product demand trends. We explain price behaviors by the impact of the demand trends. Because the refining industry which transforms crude into petroleum products is a joint product industry, petroleum product pricing is affected by demand trends both in terms of quality and quantity. Consequently, the long term equilibrium between prices, estimated through a co-integration approach, are affected by several structural breaks. We also develop a panel econometric model which simultaneously takes into account the relative prices of ail world products towards one crude. Finally, the different results are compared to the marginal costs derived from an oil refining optimization model. This econometric modeling approach enables a better understanding of the long term equilibrium between prices of petroleum products and crude. (authors)

  7. China's petroleum industry

    International Nuclear Information System (INIS)

    Boykiw, A.; Katsuris, D.

    1997-01-01

    Petroleum and natural gas resources, industry organization, production, pipeline construction and other transportation issues, refining and business aspects of the Chinese petroleum and natural gas industries were reviewed. The need for large amounts of foreign capital and western technology to stem the deficit in domestic hydrocarbon supply were emphasized as being responsible for the creation in China of favourable conditions for foreign participation in oil and gas exploration, and for the growing confidence for Western investment in China. The most important considerations for successful participation in the economic development of China include: understanding the roles of networking, cultural affinity and reciprocity; hands-on management; finding an appropriate business partner, agent/distributor, or joint venture partner; and understanding local peculiarities and customs. 3 refs

  8. Petroleum product market outlook

    International Nuclear Information System (INIS)

    2005-09-01

    The influence of petroleum market disturbances on price increases was discussed with particular reference to Hurricane Katrina and the loss of refinery production and damage to oil infrastructure in the United States. The supply of petroleum products in Canada will be very tight heading into the winter of 2006, despite the fact that Canadian refineries are operating at full capacity to ensure an adequate supply of gasoline and diesel fuel for consumers. In addition to refinery production, petroleum supplies are also determined by the adequacy of inventories and the efficiency of the infrastructure in place to deliver products to where they are needed. The lack of spare capacity has reduced the flexibility of the North American refining system to respond to further disruptions. Refiners were asked to provide information on 4 areas of their operations in order for Natural Resources Canada to analyze the short-term outlook for petroleum products markets. The 4 areas included refinery utilization rates and capability to increase production; any planned refinery turnaround that would affect petroleum product supplies; inventory levels compared to levels in previous years; and, any logistical problems that could affect product distribution. A graph depicting the relationship between Canadian production of gasoline and domestic sales clearly illustrated the seasonal nature of gasoline consumption and that production in Canada is much higher than consumption. Canada exports large volumes of gasoline, primarily to the United States eastern seabord from refineries in Atlantic Canada. The trend is similar for diesel fuel. Demand for both gasoline and diesel is expected to continue to grow in 2005 as high prices have had a limited impact on demand growth. In general, the Ontario/Quebec region is short of gasoline and must import gasoline during the summer months to cover the shortfall. It was noted that motorists and homeowners who heat with oil will bear the burden of higher

  9. Real-Time Dispatch of Petroleum Tank Trucks

    OpenAIRE

    Gerald G. Brown; Glenn W. Graves

    1981-01-01

    A highly automated, real-time dispatch system is described which uses embedded optimization routines to replace extensive manual operations and to reduce substantially operating costs for a nation-wide fleet of petroleum tank trucks. The system is currently used in daily operations by the Order Entry and Dispatch segment of the Chevron U.S.A. Marketing System. Refined petroleum products valued at several billion dollars per year are dispatched from more than 80 bulk terminals on a fleet excee...

  10. Petroleum supply monthly, August 1995 with data for June 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-25

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  11. The present state of refining in France

    International Nuclear Information System (INIS)

    1996-01-01

    The european refining industry suffers from a production over-capacity and closures are inevitable; the situation is even worse in France due to the imbalance between gas oil and gasoline prices and the weak margin for distributors. The French refining industry is however an important and essential link for its strategic fuel and petroleum product supply, and represent 17000 jobs. Several measures are introduced by the French Industry department towards restructuring, capacity reduction and fuel price harmonization

  12. Reference data about petroleum fiscality; Reperes sur la fiscalite petroliere

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-01-15

    This paper explains the different taxes existing in France for the petroleum products (domestic tax on petroleum products, added-value tax), the share of taxes in the retail price, the differences with other European countries, the French Government fiscal receipts and budget. Some information forms are attached to this document and concern: the formation of fuel prices (upstream, refining and transport-distribution margins), the evolution of annual average transport-distribution margins, some reference data about world petroleum markets (supply and demand, prices, market data), and some reference data about the role of oil companies on the petroleum market. (J.S.)

  13. Panorama of the petroleum industry

    International Nuclear Information System (INIS)

    2003-05-01

    This document provides tables and charts of statistical data concerning the petroleum industry activity in 2002: supply and demand, prices, consumption, service station number and the market. A second part is devoted to the fuel quality and air quality: the constant improvement of the fuels and the investments refining/distribution. (A.L.B.)

  14. BIOREMEDIATION OF A PETROLEUM-HYDROCARBON

    African Journals Online (AJOL)

    ES OBE

    under field conditions in the bioremediation of a petroleum- hydrocarbon polluted ... an accelerated biodegradation of petroleum hydrocarbons in a polluted agricultural soil ..... 12) Jackson, M.L. Soil chemical analysis. ... biological assay. 3 rd.

  15. Biocide usage in cooling towers in the electric power and petroleum refining industries

    Energy Technology Data Exchange (ETDEWEB)

    Veil, J.; Rice, J.K.; Raivel, M.E.S.

    1997-11-01

    Cooling towers users frequently apply biocides to the circulating cooling water to control growth of microorganisms, algae, and macroorganisms. Because of the toxic properties of biocides, there is a potential for the regulatory controls on their use and discharge to become increasingly more stringent. This report examines the types of biocides used in cooling towers by companies in the electric power and petroleum refining industries, and the experiences those companies have had in dealing with agencies that regulate cooling tower blowdown discharges. Results from a sample of 67 electric power plants indicate that the use of oxidizing biocides (particularly chlorine) is favored. Quaternary ammonia salts (quats), a type of nonoxidizing biocide, are also used in many power plant cooling towers. The experience of dealing with regulators to obtain approval to discharge biocides differs significantly between the two industries. In the electric power industry, discharges of any new biocide typically must be approved in writing by the regulatory agency. The approval process for refineries is less formal. In most cases, the refinery must notify the regulatory agency that it is planning to use a new biocide, but the refinery does not need to get written approval before using it. The conclusion of the report is that few of the surveyed facilities are having any difficulty in using and discharging the biocides they want to use.

  16. Petroleum supply monthly, March 1999, with data for January 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The Petroleum Supply Monthly (PSM) is one of a family of four petroleum supply publications produced by the Petroleum Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  17. State Petroleum Enterprises in developing countries. [Conference highlights

    Energy Technology Data Exchange (ETDEWEB)

    Constantinou, C

    1978-10-01

    The growth in production and consumption of Petroleum in the developing countries has been accompanied by the establishment of State Petroleum Enterprises with the task of undertaking exploration, production, transportation, refining and marketing. Participants at a United Nations Conference exchanged experiences in the organization, management, and activities of State Petroleum Enterprises and reviewed co-operative arrangements among themselves. A central clearinghouse to aid technology transfer and training experience to less-developed countries was proposed. The conference also stressed that cooperation between state enterprises should be expanded in the future at both the bilateral and regional levels. It was felt that the conference provided an impressive demonstration of the growing role of State Petroleum Enterprises as effective instruments of national petroleum and economic development and emphasized the increasing role they must play in the world economy. 10 references. (SAC)

  18. Demand outlook for sulfur and high-sulfur petroleum coke

    Energy Technology Data Exchange (ETDEWEB)

    Koshkarov, V.Ya.; Danil' yan, P.G.; Feotov, V.E.; Gimaev, R.N.; Koshkarova, M.E.; Sadykova, S.R.; Vodovichenko, N.S.

    1980-01-01

    The feasibility of using sulfur and high-sulfur petroleum coke fines in pyrometallurgical processes and also in the chemical and coal-tar chemical industry is examined. Results of industrial tests on briquetting fines of petroleum coke with a petroleum binder are presented. The feasibility of using the obtained briquets in shaft furnace smelting of oxidized nickel ores, production of anode stock, and also in the chemical industry are demonstrated.

  19. Strategic issues and implications for the refining and marketing sector

    International Nuclear Information System (INIS)

    Jeffe, R.A.

    1995-01-01

    Refiners have faced a challenging business environment for the past decade. During this period, the industry has made approximately $25 billion of capital expenditures primarily to comply with increased governmental mandates, faced highly volatile petroleum product prices and garnered a return to equity of only 5%. While worldwide and US refining capacity has been flat in recent years, demand for refined petroleum products has been on the upswing and domestic supplies have also increased due to improved US capacity utilization rates (76% in 1984 and 93% in 1994) and increased imports (gasoline sales up 11% since 1984). The result has been highly volatile and generally weak refining margins (net Gulf Coast crack spread ranging from ($.95)/bbl in 1984 to $1.84/bbl in 1990 and averaging $.81/bbl since 1984). In response to the sustained difficulties in the marketplace, one has recently witnessed some strategic realignment in the industry. Several of the integrated companies, frustrated with the required capital expenditures and meager returns, have decided to shed non-core, non-strategic refining assets. For the most part, these assets have been bought by independents at, by historical measures, very attractive terms. This paper will provide an overview of the economics of the refining business, discuss the recent trends in refinery M and A activity and summarize possible implications of the recent strategic realignment

  20. Petroleum supply monthly, November 1996 with data for September 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    Data presented in this report describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products fin the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section present a time series of selected petroleum data on a US level. The Detailed Statistics tables present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  1. Petroleum supply monthly: September 1996, with data for July 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    Data presented in this report describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 56 tabs.

  2. Satisfaction of the Automotive Fleet Fuel Demand and Its Impact on the Oil Refining Industry

    Science.gov (United States)

    1980-12-01

    Because virtually all transportation fuels are based on petroleum, it is essential to include petroleum refining in any assessment of potential changes in the transportation system. A number of changes in the automotive fleet have been proposed to im...

  3. Anicteric hepatoxicity: a potential health risk of occupational exposures in Nigerian petroleum oil refining and distribution industry.

    Science.gov (United States)

    Ezejiofor, Tobias I Ndubuisi; Ezejiofor, Anthonet N; Orisakwe, Orish E; Nwigwe, Hariet C; Osuala, Ferdinand Ou; Iwuala, Moses Oe

    2014-01-22

    Literature abounds linking one's job to certain unpalatable health outcomes. Since exposures to hazardous conditions in industrial environments often results in sundry health effects among workers, we embarked on this study to investigate the hepatic health effects of occupational activities in the petroleum refining and distribution industry. Biochemical markers of liver functions were assayed in plasma, using Reflotron dry chemistry spectrophotometric system. The study was conducted on randomly selected workers of Port Harcourt Refining Company (PHRC) and Pipelines and Petroleum Product Marketing Company (PPMC) both in Alesa-Eleme near Port Harcourt, Nigeria, as well as non-oil work civil servants serving as control subjects. Results showed that, bilirubin ranged 0.3-1.6 mg/dl with a mean of 0.66±0.20mg/dl among the oil workers as against 0.5-1.00mg/dl with a mean of 0.58±0.13mg/dl in non-oil workers, Alkaline phosphatase ranged 50.00-296.00u/l (mean: 126.21±39.49u/l) in oil workers as against 40.20-111u/l (mean: 66.83±18.54u/l) for non-oil workers, Aspartic transaminases (AST) ranged 5.80-140.20u/l (mean: 21.81±11.49u/l) in oil workers against 18.00-44.00u/l (mean: 26.89±6.99u/l) for non-oil workers, while Alanine transaminases (ALT) ranged 4.90-86.00u/l (mean: 22.14±11.28u/l) in oil workers as against 10.00-86.60u/l (mean: 22.30±10.22u/l) for the non-oil workers. A close study of the results revealed that although the mean values for all the studied parameters were still within the parametric reference ranges, however, relative to the referents, there were significant increases (Pdifferentiation data showed that though the mean values for the parameters were higher in males than females, the increases were not significant in most cases (P>0.05), whereas data for age and exposure period classifications revealed that irrespective of the age of the worker, the effects are likely to start after the first five years, manifesting fully after the first decade

  4. Petroleum refining fitness assessment to the sectoral approaches to address climate change; Analise da aptidao do setor refino de petroleo as abordagens setoriais para lidar com as mudancas climaticas globais

    Energy Technology Data Exchange (ETDEWEB)

    Merschmann, Paulo Roberto de Campos

    2010-03-15

    The climate agreement that will take place from 2013 onwards needs to address some of the concerns that were not considered in the Kyoto Protocol. Such concerns include the absence of emission targets for big emitters developing countries and the impacts of unequal carbon-policies on the competitiveness of Annex 1 energy-intensive sectors. Sectoral approaches for energy-intensive sectors can be a solution to both concerns, mainly if they address climate change issues involving all the countries in which these sectors have a significant participation. A sector is a good candidate to the sectoral approaches if it has some characteristics. Such characteristics are high impact to the competitiveness of Annex 1 enterprises derived of the lack of compromises of enterprises located in non Annex 1 countries, high level of opportunities to mitigate GHG emissions based on the application of sectoral approaches and easy sectoral approaches implementation in the sector. Then, this work assesses the petroleum refining sector fitness to the sectoral approaches to address climate change. Also, this dissertation compares the petroleum refining sector characteristics to the characteristics of well suited sectors to the sectoral approaches. (author)

  5. Refining margins: recent trends

    International Nuclear Information System (INIS)

    Baudoin, C.; Favennec, J.P.

    1999-01-01

    Despite a business environment that was globally mediocre due primarily to the Asian crisis and to a mild winter in the northern hemisphere, the signs of improvement noted in the refining activity in 1996 were borne out in 1997. But the situation is not yet satisfactory in this sector: the low return on invested capital and the financing of environmental protection expenditure are giving cause for concern. In 1998, the drop in crude oil prices and the concomitant fall in petroleum product prices was ultimately rather favorable to margins. Two elements tended to put a damper on this relative optimism. First of all, margins continue to be extremely volatile and, secondly, the worsening of the economic and financial crisis observed during the summer made for a sharp decline in margins in all geographic regions, especially Asia. Since the beginning of 1999, refining margins are weak and utilization rates of refining capacities have decreased. (authors)

  6. Petroleum supply monthly, May 1999, with data for March 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary supplies of petroleum products in the US (50 states and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 72 tabs.

  7. Petroleum supply monthly, June 1999, with data for April 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-06-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  8. Petroleum supply monthly, April 1999, with data for February 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 72 tabs.

  9. Petroleum supply monthly, November 1998, with data for September 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the Unites States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 72 tabs.

  10. Petroleum supply monthly, December 1997 with data from October 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregates, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  11. Petroleum supply monthly, January 1999 with data for November 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-01-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 82 tabs.

  12. Petroleum supply monthly, July 1997 with data from May 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  13. Petroleum supply monthly, February 1999, with data for December 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  14. Petroleum supply monthly, August 1998, with data for June 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-08-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 fig., 66 tabs.

  15. Petroleum supply monthly: July 1998, with data for May 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    Data presented in the Petroleum Supply Monthly (PSM) describes the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 56 tabs.

  16. Petroleum supply monthly, January 1997 with data for November 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    Data presented in the Petroleum Supply Monthly describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section present a time series of selected petroleum data on a US level. The Detailed Statistics tables present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  17. Petroleum supply monthly, May 1996 with data from March 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    Data presented in the Petroleum Supply Monthly (PSM) describe the supply and disposition of petroleum products in the US and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the US (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the US. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. 16 figs., 66 tabs.

  18. Petroleum supply monthly, September 1995 with data for July 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-27

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  19. Petroleum supply monthly, May 1995 with data for March 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-25

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States.Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  20. Petroleum Supply Monthly, March 1996 (with data for January 1996)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-04

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Supply Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report (WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics.

  1. Petroleum Supply Monthly, September 1998, with data for July 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-28

    The Petroleum Supply Monthly (PSM) is one of a family of four publications produced by the Petroleum Division within the Energy Information Administration (EIA) reflecting different levels of data timeliness and completeness. The other publications are the Weekly Petroleum Status Report WPSR), the Winter Fuels Report, and the Petroleum Supply Annual (PSA). Data presented in the PSM describe the suppiy and disposition of petroleum products in the United States and major U.S. geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics

  2. Petroleum electrical properties characterization; Caracterizaco de propriedades eletricas de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Ueti, Edson; Sens, Marcio Antonio [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil)], e-mail: ueti@cepel.br

    2006-07-01

    Presently, petroleum wells consist predominantly of heavy type petroleum, that is submitted to decantation and separation of water, through desalinisation process. If this process is not efficient, the metallic piping will be severely corroded during refining. Hence, the knowledge of petroleum electric properties is essential for optimizing the separation of water from petroleum, by indicating its humidity in laboratory testing conditions. The present work shows an experimental procedure based on disposable cells for electric characterization of liquid polymeric materials. The use of standard cells is unfeasible, due to the petroleum physical characteristics. The procedures for the evaluation of electric properties shown in this work are applied for dielectric constant values up to 200 kHz, as well as for the electric conductivity in direct current and the electrical strength in industrial frequency. (author)

  3. Natural gas in 1951: Petroleum in 1951: Logs of wells for 1951. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1954-12-31

    The first part of this report summarises natural gas exploration activity, well drilling, infrastructure changes and improvements, production, distribution, consumption, and leakage during transmission or distribution of natural gas in Ontario. Includes lists of operators licensed to lease, prospect, drill or bore for, produce, and distribute natural gas in the province. The second part summarises oil industry activities, oil production, well drilling, petroleum and refined products imports, and petroleum refining operations. Relevant statistics are provided throughout both parts of the report. Also includes drillers` logs for oil and gas wells completed during the year.

  4. Did you know? Petroleum industry fast facts: Alberta

    International Nuclear Information System (INIS)

    1999-10-01

    This is part of a series of brochures published by the Petroleum Communication Foundation, a non-profit society established in 1975. The foundation's objective is to stimulate public awareness and understanding of Canada's petroleum industry and its contribution to the economy of each of the provinces where the industry's presence and impact is substantial. This brochure provides brief, but useful, information about Alberta, about its area (661,190 sq.km), capital (Edmonton), population (2.914,918 in 1998) major industries (petroleum and mining, chemical products, agriculture, food, manufacturing, construction), revenue from natural resources (an estimated $ 3.4 billion from oil and natural gas in 1999-2000, or about 15 per cent of total government revenues), some facts about the petroleum industry in Alberta, (production, employment, pipelines, etc.), major exports (petroleum and natural gas, manufactured goods, primary agricultural products, chemicals and chemical products), and upstream industry expenditures in the province (about $ 12 billion in 1998). map, pie-chart, figs

  5. Prospective of petroleum products 2002-2011; Prospectiva de petroliferos 2002-2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This prospective provides a complete panorama of the requirements in the refining industry of Mexico at short, medium and long terms. Here subjects such as: fuels quality, historical and expected investments and prices, International situation of the installed refining capacity, the demand and regional balance of petroleum products at year 2001, the regulatory framework and the organization of the petroleum sector, the realized investments in the last nine years, Saving programs and efficient use of energy and the applicable regulations to this sector for its optimum use are treated. At the end of this book there are annexes with the abbreviations, acronyms and, conversion factors as well as the fundamental definitions. (Author)

  6. Direm prices, prices and margins of petroleum products in France and in the European Union

    International Nuclear Information System (INIS)

    2005-01-01

    This document presents in a series of graphics and tables, the evolution of petroleum products prices and margins in France and in the European Union: crude oil prices, Rotterdam's petroleum products quotation, raw brent refining margin, automotive and domestic fuel prices. (J.S.)

  7. Natural gas in 1950: Petroleum in 1950: Logs of wells in 1950. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1953-12-31

    Part III of this annual report consists of three separate reports on natural gas; petroleum; and logs of wells. The natural gas report discusses production and distribution, changes and improvements; consumption and rates; and gas wells and their production. The petroleum report presents information on production and drilling by township; expansion; and petroleum importation and refining operations. The logs of wells are presented alphabetically by counties, townships, and owners, respectively.

  8. Natural gas in 1952: Petroleum in 1952: Logs of wells for 1952. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1955-12-31

    Part III of this annual report consists of three separate reports on natural gas; petroleum; and logs of wells. The natural gas report discusses production and distribution, changes and improvements; consumption and rates; and gas wells and their production. The petroleum report presents information on production and drilling by township; expansion; and petroleum importation and refining operations. The logs of wells are presented alphabetically by counties, townships, and owners, respectively.

  9. Promise of combined hydrothermal/chemical and mechanical refining for pretreatment of woody and herbaceous biomass.

    Science.gov (United States)

    Kim, Sun Min; Dien, Bruce S; Singh, Vijay

    2016-01-01

    Production of advanced biofuels from woody and herbaceous feedstocks is moving into commercialization. Biomass needs to be pretreated to overcome the physicochemical properties of biomass that hinder enzyme accessibility, impeding the conversion of the plant cell walls to fermentable sugars. Pretreatment also remains one of the most costly unit operations in the process and among the most critical because it is the source of chemicals that inhibit enzymes and microorganisms and largely determines enzyme loading and sugar yields. Pretreatments are categorized into hydrothermal (aqueous)/chemical, physical, and biological pretreatments, and the mechanistic details of which are briefly outlined in this review. To leverage the synergistic effects of different pretreatment methods, conducting two or more pretreatments consecutively has gained attention. Especially, combining hydrothermal/chemical pretreatment and mechanical refining, a type of physical pretreatment, has the potential to be applied to an industrial plant. Here, the effects of the combined pretreatment (combined hydrothermal/chemical pretreatment and mechanical refining) on energy consumption, physical structure, sugar yields, and enzyme dosage are summarized.

  10. Photolysis of petroleum

    International Nuclear Information System (INIS)

    Bobra, M.

    1992-05-01

    A study was conducted to examine the chemical and physical changes that occur in oils as a result of photooxidation. A literature review of recent studies in petroleum photochemistry revealed reported effects of photo-induced reactions in petroleum, including changes in color, polymerization, solidification, increases in solubility and toxicity, and changes in interfacial properties. A list of products reported as a result of photolysis of petroleum is presented, including such compounds as aldehydes, ketones, esters, and lactones. The photoreactivity of various petroleum components is discussed and mechanisms of photooxidation of petroleum are suggested. In the experimental portion of the study, a variety of crude oils and petroleum products were used to determine how different oils are affected by photolysis, and to examine the importance of photolysis as a weathering process. Photooxidation products from several oils were isolated and identified, including aliphatic and aromatic acids, alcohols, and phenols. Some physical manifestations attributed to photolysis included yellowing, formation of precipitates or crusts, increases in density and viscosity with time, increases of asphaltene content in some oils, changes in pH of the surrounding water, and emulsification. 51 refs., 38 figs., 18 tabs

  11. Atlantic Basin refining profitability

    International Nuclear Information System (INIS)

    Jones, R.J.

    1998-01-01

    A review of the profitability margins of oil refining in the Atlantic Basin was presented. Petroleum refiners face the continuous challenge of balancing supply with demand. It would appear that the profitability margins in the Atlantic Basin will increase significantly in the near future because of shrinking supply surpluses. Refinery capacity utilization has reached higher levels than ever before. The American Petroleum Institute reported that in August 1997, U.S. refineries used 99 per cent of their capacity for several weeks in a row. U.S. gasoline inventories have also declined as the industry has focused on reducing capital costs. This is further evidence that supply and demand are tightly balanced. Some of the reasons for tightening supplies were reviewed. It was predicted that U.S. gasoline demand will continue to grow in the near future. Gasoline demand has not declined as expected because new vehicles are not any more fuel efficient today than they were a decade ago. Although federally-mandated fuel efficiency standards were designed to lower gasoline consumption, they may actually have prevented consumption from falling. Atlantic margins were predicted to continue moving up because of the supply and demand evidence: high capacity utilization rates, low operating inventories, limited capacity addition resulting from lower capital spending, continued U.S. gasoline demand growth, and steady total oil demand growth. 11 figs

  12. India's refining prospects linked to economic growth

    International Nuclear Information System (INIS)

    Lewis, E.

    1996-01-01

    International investors assess refining ventures in India the same way they do comparable projects elsewhere in the world: according to their expectations about investment returns. By that standard, India's appeal is mixed, although its need for some measure of additional refining capacity seems certain. The success of future refinery investments will depend heavily on the government's commitment to policies allowing the economy to grow faster than the population. Unless accompanied by economic growth, expected increases in the population will not automatically raise demand for petroleum products. Decisions about investments in India's refining sector, therefore, must carefully weigh market fundamentals, the business environment, and likely investment performance. This paper reviews the market for the various products and predicts new economic trends

  13. US refining reviewed

    International Nuclear Information System (INIS)

    Yamaguchi, N.D.

    1998-01-01

    The paper reviews the history, present position and future prospects of the petroleum industry in the USA. The main focus is on supply and demand, the high quality of the products, refinery capacity and product trade balances. Diagrams show historical trends in output, product demand, demand for transport fuels and oil, refinery capacity, refinery closures, and imports and exports. Some particularly salient points brought out were (i) production of US crude shows a marked downward trend but imports of crude will continue to increase, (ii) product demand will continue to grow even though the levels are already high, (iii) the demand is dominated by those products that typically yield the highest income for the refiner, (i.e. high quality transport fuels for environmental compliance), (iv) refinery capacity has decreased since 1980 and (v) refining will continue to have financial problems but will still be profitable. (UK)

  14. Sustainable future alternatives to petroleum-based polymeric conservation materials

    DEFF Research Database (Denmark)

    Shashoua, Yvonne; Jankova Atanasova, Katja; Curran, Claire

    2017-01-01

    and coating formulations. Bio-polyethylenes, bio-polyesters and bio-cellulose-based products were evaluated against petroleum-based materials. Bio- and petroleum-based polyethylenes shared optical, chemical and thermal properties. Bamboo and sugarcane fibre containers were also chemically stable. Polyester...

  15. Petroleum supply monthly, October 1998, with data for August 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    Data presented in the PSM describe the supply and disposition of petroleum products in the United States and major US geographic regions. The data series describe production, imports and exports, inter-Petroleum Administration for Defense (PAD) District movements, and inventories by the primary suppliers of petroleum products in the United States (50 States and the District of Columbia). The reporting universe includes those petroleum sectors in primary supply. Included are: petroleum refiners, motor gasoline blenders, operators of natural gas processing plants and fractionators, inter-PAD transporters, importers, and major inventory holders of petroleum products and crude oil. When aggregated, the data reported by these sectors approximately represent the consumption of petroleum products in the United States. Data presented in the PSM are divided into two sections: Summary Statistics and Detailed Statistics. The tables and figures in the Summary Statistics section of the PSM present a time series of selected petroleum data on a US level. The Detailed Statistics tables of the PSM present statistics for the most current month available as well as year-to-date. A feature article, Accuracy of petroleum supply data, is also included. 72 tabs.

  16. Effect of crude oil and refined petroleum product imports on the national security. Critical technologies

    International Nuclear Information System (INIS)

    1989-01-01

    The report contains the results of an investigation requested under Section 232 of the Trade Expansion Act to study the effect of oil imports on the domestic petroleum industry and on United States energy security. It reviews previous energy security assessments and resulting initiatives, assesses current US energy security, and studies emergency petroleum requirements. The report finds that there have been substantial improvements in US energy security since the last Section 232 Petroleum finding in 1979. However, declining domestic oil production, rising oil imports, and growing dependence on potentially insecure sources of supply raise concerns of vulnerability to a major supply disruption

  17. [Current status of hearing loss and related influencing factors in workers with noise exposure in refining and chemical industry].

    Science.gov (United States)

    Wu, S S; Yu, J N; He, C H; Mu, H X; Wang, C; Zhang, Y; Zhang, C Y; Yu, S F; Li, X L

    2016-12-20

    Objective: To investigate the current status of hearing loss and related influencing factors in workers with noise exposure in refining and chemical industry. Methods: From August 2015 to March 2016, the investigation method of collecting the data of past occupational health examinations and measuring noise in working environment was used to enroll 8 672 male workers. Results: Of all workers, 11.6% were diagnosed with hearing loss. There were significant differences in the distribution of hearing impairment among workers exposed to noise at different ages, device types and types of work (χ(2)=17.80, 77.80 and 30.53, all P hearing loss in workers with noise exposure in refining and chemical industry. Conclusion: The level of noise exposure and working years with noise exposure are main influencing factors for hearing loss in workers with noise exposure in refining and chemical industry.

  18. The Canadian refining Industry : The circle of influence

    International Nuclear Information System (INIS)

    Burton, W.R.

    1998-01-01

    Examples of how the downstream petroleum industry is influenced by events in the upstream petroleum sector were presented. In order to survive, Canadian refiners (downstream petroleum) must remain competitive with their domestic counterparts, with the U.S. and with offshore refiners who can import products into key Eastern markets. The downstream sector has little choice but to focus on crude costs and flexibility to try to improve the profitability of its operations. In Canada, the supply of both conventional and bitumen crude oil has increased significantly. This change in the supply and demand balance has had a definite impact on prices. Ample Canadian heavy crude supply has caused refiners to adjust their operations to take advantage of lower-cost crude oil. The result has been the announcement of several large-scale projects, such as for example Shell Oil's construction of an upgrader at their Scotsford plant. The North American pipeline system is the link between the upstream supply and the downstream demand. New pipeline projects have allowed increased supplies of Canadian heavy crude to gain access to new markets. It was emphasized that the downstream sector provides feedback to the upstream sector that influences producers when they plan their exploration, development and production activities. The picture in light crude production is the reverse of heavy crude oil production, i.e. Canadian light crude supply declined 4 per cent in 1996 from the average of the previous three years. This decline has given synthetic crude oil facilities like Syncrude and GCOS the chance to expand their production to offset a portion of the inland crude supply shortfall. 5 figs

  19. Biological Remediation of Petroleum Contaminants

    Science.gov (United States)

    Kuhad, Ramesh Chander; Gupta, Rishi

    Large volumes of hazardous wastes are generated in the form of oily sludges and contaminated soils during crude oil transportation and processing. Although many physical, chemical and biological treatment technologies are available for petroleum contaminants petroleum contaminants in soil, biological methods have been considered the most cost-effective. Practical biological remediation methods typically involve direct use of the microbes naturally occurring in the contaminated environment and/or cultured indigenous or modified microorganisms. Environmental and nutritional factors, including the properties of the soil, the chemical structure of the hydrocarbon(s), oxygen, water, nutrient availability, pH, temperature, and contaminant bioavailability, can significantly affect the rate and the extent of hydrocarbon biodegradation hydrocarbon biodegradation by microorganisms in contaminated soils. This chapter concisely discusses the major aspects of bioremediation of petroleum contaminants.

  20. A comparative evaluation of nitrogen compounds in petroleum distillates

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Dheer; Chopra, Anju; Patel, Mitra Bhanu; Sarpal, Amarjit Singh [Indian Oil Corporation Limited, Faridabad (India). Research and Development Centre

    2011-07-15

    Although the concentration of nitrogen compounds in crude oil is relatively low, they can become more concentrated in petroleum distillates and poison the catalysts used in refining processes. They cause undesirable deposits, color formation and odor in products; they also contribute to air pollution and some are highly carcinogenic. The poisoned catalyst becomes deactivated for hydrodesulfurization and unable to remove sulfur from middle distillates. In order to understand the effect on catalytic processes, it is desirable to identify the nitrogen compounds in various petroleum distillates. This paper compares the nitrogen species profiles in different petroleum distillates using a nitrogen chemiluminescence detector. In addition, four different petroleum distillate samples from different refineries were analyzed to find the variation in their nitrogen profiles. The nitrogen compounds in petroleum distillate samples were identified as anilines, quinolines, indoles, and carbazoles and their alkyl derivatives. Quantitation was carried out against known reference standards. The quantitative data were compared to the total nitrogen content determined by elemental analysis. (orig.)

  1. Japan's refiner/marketers headed for major shakeout

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    Japan's downstream oil industry is in a state of crisis and headed for a major shakeout. The major catalyst for this was a dramatic deregulation step during April 1996 that allowed refined petroleum product imports by non-refiners. The move, together with a sharp drop in refining margins, falling retail gasoline prices, and a service station sector on the brink of collapse, are all leading to massive changes in the way the country's refiners and marketers do business. This paper reviews the collapse of corporate profits during this period of deregulation; the development of a new price system geared toward bringing the prices of gasoline, fuel oil, and kerosene into line with each other to offset the fall in gasoline prices; and industry restructuring including mergers, acquisitions, and marketing consolidation. The paper then makes predictions on the outcome of these changes on the Japanese oil industry

  2. Canadian Petroleum Products Institute 1996 annual review

    International Nuclear Information System (INIS)

    1996-01-01

    The Canadian Petroleum Products Institute (CPPI) is an association of Canadian companies involved in the downstream sector of the petroleum industry which includes refining, distributing and marketing of petroleum products. CPPI's mandate includes: (1) establishing environmental policies, (2) establishing working relationships with governments to develop public policy, (3) developing guidelines for the safe handling of petroleum products, and (4) providing information about the petroleum industry to the public. Canada's 19 refineries processed an average of 1.5 million barrels of crude oil per day in 1996. Domestic sources of crude made up 61 per cent of crude oil processed in 1996. Total exports during the year amounted to 105 million barrels. Some of the issues that the CPPI focused on during 1996 included the controversy over the future of the octane enhancing fuel additive MMT, fuel quality standards for transportation fuels and reformulated fuels, gasoline pricing, air quality and workplace safety. CPPI members' participation in the Voluntary Challenge and Registry (VCR) program towards reducing greenhouse gas emissions was also discussed. The industry was also actively involved in seeking to improve its refinery wastewater discharges

  3. Production of a refined biooil derived by fast pyrolysis of chicken manure with chemical and physical characteristics close to those of fossil fuels.

    Science.gov (United States)

    Monreal, Carlos M; Schnitzer, Morris

    2011-01-01

    The chemical and physical properties of raw biooils prevent their direct use in combustion engines. We processed raw pyrolytic biooil derived from chicken manure to yield a colorless refined biooil with diesel qualities. Chemical characterization of the refined biooil involved elemental and several spectroscopic analyses. The physical measurements employed were viscosity, density and heat of combustion. The elemental composition (% wt/wt) of the refined biooil was 82.7 % C, 15.3 % H, 0.2 % N and 1.8 % O, no S. Its viscosity was 0.006 Pa.s and a heat of combustion of 43 MJ kg(-1). The refined biooil fraction contains n-alkanes, ranging from n-C(14) to n-C(27), alkenes varying from C(10:1) to C(22:1), and long-chain alcohols. The refined biooil makes a good diesel fuel due to its chemical and physical properties.

  4. Source identification of underground fuel spills in a petroleum refinery using fingerprinting techniques and chemo-metric analysis. A Case Study

    International Nuclear Information System (INIS)

    Kanellopoulou, G.; Gidarakos, E.; Pasadakis, N.

    2005-01-01

    Crude oil and its refining products are the most frequent contaminants, found in the environment due to spills. The aim of this work was the identification of spill source(s) in the subsurface of a petroleum refinery. Free phase samples were analyzed with gas chromatography and the analytical results were interpreted using Principal Component Analysis (PCA) method. The chemical analysis of groundwater samples from the refinery subsurface was also employed to obtain a comprehensive picture of the spill distribution and origin. (authors)

  5. Petroleum products. Looking back over the past 50 years

    Energy Technology Data Exchange (ETDEWEB)

    Del Castillo, F. [CONCAWE, Brussels (Belgium)

    2013-04-01

    The field of petroleum products in CONCAWE has historically been concerned with product stewardship and chemicals control legislation relating to the production, marketing and use of petroleum substances. In 1977, the Petroleum Products Management Group issued its first report, titled 'An assessment of precautionary labelling systems relating to the movement of petroleum products in bulk', the objective of which was to promote the harmonisation of labelling for dangerous goods. Over the years CONCAWE has continued to provide guidance to its member companies on compliance with emerging and evolving EU legislation related to the control of chemicals.

  6. Modular-block complex on preparation and processing of oil slurry, spilled and raw petroleum

    International Nuclear Information System (INIS)

    Pak, V.V.

    1999-01-01

    The use of non-serial small petroleum equipment for development of remote and low output petroleum deposit, collection and processing of spilled petroleum is urgent issue. Joint-stock company Montazhengineering developed and mastered production of small modular-block complexes for preparation and processing of petroleum. The complex can include the following modules: preparation of raw petroleum for getting commodity petroleum; petroleum processing installation for getting gas, diesel fuel and black oil; installation for refining of nafta; installation for cleaning petroleum products from mercaptans; installation for getting basic oil; installation for getting bitumen and mastic; installation for processing of spilled petroleum and oil slurry. Each of modules can work separately and in various combinations depending on input and necessary assortment of commodity petroleum. One of urgent ecological problem in Kazakhstan petroleum-processing regions is large number barns with spilled petroleum and oil slurry. Their processing will allow to solve the ecological and economical problems. Processing of spilled petroleum and oil slurry in developed installations it's possible to get commodity petroleum and petroleum products

  7. Advances in metabolic pathway and strain engineering paving the way for sustainable production of chemical building blocks

    DEFF Research Database (Denmark)

    Chen, Yun; Nielsen, Jens

    2013-01-01

    Bio-based production of chemical building blocks from renewable resources is an attractive alternative to petroleum-based platform chemicals. Metabolic pathway and strain engineering is the key element in constructing robust microbial chemical factories within the constraints of cost effective...... production. Here we discuss how the development of computational algorithms, novel modules and methods, omics-based techniques combined with modeling refinement are enabling reduction in development time and thus advance the field of industrial biotechnology. We further discuss how recent technological...

  8. Natural gas in 1927: Petroleum in 1927: The oil and gas fields of Ontario. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, R B

    1930-12-31

    This annual report presents figures for gas consumption in Ontario, gas wells and their production, and leakage. It includes licenses issued for the year and logs of wells. Information is also given on oil production in Ontario, petroleum refining and petroleum imported into Ontario.

  9. The oil and petroleum industry. 20. ed.

    International Nuclear Information System (INIS)

    1992-01-01

    This financial survey is a compilation of financial and marketing data on oil and petroleum industry companies in the United Kingdom. It includes quoted companies in the production and distribution industry, unquoted companies in the exploration and production industry, unquoted companies in the refining and distribution industry, a geographical index and an alphabetical index. (UK)

  10. Whether integrating refining and petrochemical business can provide opportunities for development of petrochemical industry in Serbia

    Directory of Open Access Journals (Sweden)

    Popović Zoran M.

    2016-01-01

    Full Text Available Since the beginning of 90s of last century both the petroleum industry and petrochemical industry have operated in difficult circumstances. In particularly, margins of petroleum and petrochemical industry were exacerbated during global economic crisis in 2008-2009 years. At that time, as one option that could be the solution, the global analysts had started to more intense investigate the benefits of Refining-Petrochemical Integration. Shortly afterwards, more and more petroleum refineries and petrochemical manufacturers began to see the future in this kind of operational, managerial, marketing and commercial connection. This paper evaluates, in particular, the achieved level of integration of refinery and petrochemical businesses in Central and South-Eastern Europe. And specifically, the paper identifies current capabilities and future chances of linking this kind of integration between Serbian refining and petrochemical players. The viability of integration between possible actors and benefits of every single refining-petrochemical interface in Serbia depend on many factors, and therefore each integrated system is unique and requires prior serious Cost Benefit Analysis.

  11. Concurrent reduction and distillation: an improved technique for the recovery and chemical refinement of the isotopes of cadmium and zinc

    International Nuclear Information System (INIS)

    Caudill, H.H.; McBride, L.E.; McDaniel, E.W.

    1982-01-01

    The Electromagnetic Isotope Separations Program of the Oak Ridge National Laboratory has been involved in the separation, chemical recovery, and refinement of the stable isotopes of cadmium and zinc since 1946. Traditionally, the chemical refinement procedures for these elements consisted of ion exchange separations using anion exchange resins followed by pH-controlled hydrogen sulfide precipitations. The procedures were quite time-consuming and made it difficult to remove trace quantities of sulfur which interferes in subsequent attempts to prepare rolled metal foils. As demands for 113 Cd and 68 Zn (a precursor for the production of the radiopharmaceutical 67 Ga) increased, it became evident that a quicker, more efficient refinement procedure was needed. Details of an improved method, which employs concurrent hydrogen reduction and distillation in the recovery and refinement of isotopically enriched zinc, are described. Modifications of the procedure suitable for the refinement of cadmium isotopes are also described. 3 figures, 1 table

  12. Mutagenicity and chemical characterization of two petroleum distillates.

    Science.gov (United States)

    Carver, J H; MacGregor, J A; King, R W

    1984-08-01

    To investigate if the Salmonella/microsome assay could reliably screen complex petroleum samples for their carcinogenic potential, two high boiling (700-1070 degrees F) petroleum distillates with known activity in a dermal carcinogenesis bioassay were fully characterized with respect to their hydrocarbon composition and polynuclear aromatic hydrocarbon (PNA) content and assayed for mutagenic activity. Mutagenicity assays were also carried out on the aromatic hydrocarbon aggregates separated from these oils by adsorption chromatography. The composition of the distillates differed substantially, and reflected the fact that they were derived from crude oils that were extremely divergent in hydrocarbon character. Both the distillate and aromatic samples consistently induced a very slight increase in revertant TA98 and TA100 colonies; however, an increase of 2-4-fold over background was observed when the S-9 concentration was increased 5-10 times that of the standard assay. The maximal response was less than that expected from the samples' known PNA content and observed potency in the dermal carcinogenesis bioassay. In the Salmonella/microsome assay, all samples inhibited the mutagenic activity of added benzo[a]pyrene. Discordance between the magnitude of the samples' mutagenic activity and their known PNA content may be related to direct or indirect inhibition of sample PNAs by other components of the complex petroleum fractions. Observed inhibitory effects support the use of elevated S-9 concentration in the in vitro assays assessing the carcinogenic potential of petroleum-derived materials.

  13. National oil companies' presence to hike US refining competition

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that the downstream segment of the U.S. petroleum business is virtually certain to become more competitive because of the growing presence of national oil companies in the country's refining industry. That's a forecast by New York investment firm Kidder Peabody. It cites a plan by Mexico's Petroleos Mexicanos (Pemex) to form a joint venture with Shell Oil Co. covering Shell's 225,000 b/d Deer Park, Tex., refinery as the latest example of national oil companies' movement into U.S. refining

  14. 1991 worldwide refining and gas processing directory

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    This book ia an authority for immediate information on the industry. You can use it to find new business, analyze market trends, and to stay in touch with existing contacts while making new ones. The possibilities for business applications are numerous. Arranged by country, all listings in the directory include address, phone, fax and telex numbers, a description of the company's activities, names of key personnel and their titles, corporate headquarters, branch offices and plant sites. This newly revised edition lists more than 2000 companies and nearly 3000 branch offices and plant locations. This east-to-use reference also includes several of the most vital and informative surveys of the industry, including the U.S. Refining Survey, the Worldwide Construction Survey in Refining, Sulfur, Gas Processing and Related Fuels, the Worldwide Refining and Gas Processing Survey, the Worldwide Catalyst Report, and the U.S. and Canadian Lube and Wax Capacities Report from the National Petroleum Refiner's Association

  15. Assessment Bioremediation of Contaminated Soils to Petroleum Compounds and Role of Chemical Fertilizers in the Decomposition Process

    OpenAIRE

    H. Parvizi Mosaed; S. Sobhan Ardakani; M. Cheraghi

    2013-01-01

    Today oil removal from contaminated soil by new methods such as bioremediation is necessary.  In this paper, the effect of chemical fertilizers and aeration on bioremediation of oil-contaminated soil has been investigated. Also the control group, (bioremediation of petroleum hydrocarbons in contaminated soil without treatment by chemical fertilizers and aeration treatment was examined. The condition of experiment is as following: those were treated 70 days in glass columns (30×30×30cm dimensi...

  16. Petroleum

    Energy Technology Data Exchange (ETDEWEB)

    Lugg, W G

    1967-07-01

    This discussion of the Canadian petroleum industry for the year 1966 includes production statistics and operating procedures, reserve estimates, exploration and development, transportation, refining, and marketing. Most sectors of the Canadian industry had an excellent year in 1966, featured by continued exploration and development successes in the Rainbow Lake-Zama Lake region of northwestern Alberta and a record value of production that exceeded $900 million for all liquid hydrocarbons. Production of crude oil and natural gas liquids exceeded one million bopd. Crude oil producers supplied 58% of the total crude oil requirements for Canadian refineries. Oil reserves increased due primarily to the application of secondary recovery and the discovery of new reserves. Total pipeline construction decreased, and there was a small increase in refinery capacity.

  17. Comparison of analytical methods used to measure petroleum hydrocarbons in soils and their application to bioremediation studies

    International Nuclear Information System (INIS)

    Douglas, G.S.; Wong, W.M.; Rigatti, M.J.; McMillen, S.J.

    1995-01-01

    Chemical measurements provide a means to evaluate crude oil and refined product bioremediation effectiveness in field and laboratory studies. These measurements are used to determine the net decrease in product or target compound concentrations in complex soil systems. The analytical methods used to evaluate these constituents will have a direct impact on the ability of the investigator to; (1) detect losses due to biodegradation, (2) understand the processes responsible for the hydrocarbon degradation and, (3) determine the rates of hydrocarbon degradation. This understanding is critical for the testing and design of bioremediation programs. While standard EPA methods are useful for measuring a wide variety of industrial and agrochemicals, they were not designed for the detection and accurate measurement of petroleum compounds. The chemical data generated with these standard methods are usually of limited utility because they lack the chemical specificity required to evaluate hydrocarbon compositional changes in the oil contamination required to evaluate biodegradation. The applications and limitations of standard EPA methodologies (EPA Methods 418.1, 8270, and modified 8015) will be evaluated and compared to several new analytical methods currently being used by the petroleum industry (e.g., gross compositional analysis, TLC-FID analysis, and enhanced EPA Method 8270) to evaluate bioremediation effectiveness in soils

  18. Petroleum and natural gas economy in Arab countries and in Iran, Angola, Gabon, Nigeria and Chad

    International Nuclear Information System (INIS)

    1993-01-01

    This paper describes briefly main informations on petroleum prices and market trends, trade and contracts, petroleum exploration in Algeria, Chad, Gabon, Libya, Saudi Arabia and Tunisia, new crude oil discoveries in Nigeria. In Iran, a joint venture will be constituted with Gaz de France for natural gas export in Europe. In Egypt, National Bank has financed for the first time a Liquefied Petroleum Gas plant. Statistics on petroleum and natural gas reserves, production, seismic surveys, drilling operations and refining units are also given. 9 tabs

  19. Bioremediation of petroleum hydrocarbons in soil environments. Report No. EE-141

    Energy Technology Data Exchange (ETDEWEB)

    Rowell, M J; Ashworth, J; Qureshi, A A

    1992-01-01

    The bioremediation of petroleum hydrocarbons in soil environments was reviewed by means of a literature survey and also through discussions with workers in relevent disciplines. This report discusses both the impacts of hydrocarbons on soil and a range of methods available to assist in the decomposition by soil microorganisms. The range of petroleum-based materials considered includes conventional and synthetic crude oils, refined oils, oily sludges, asphalts and bitumens, drilling mud residues, creosote tars and some pesticides.

  20. Fitness-for-service and decisions for petroleum and chemical equipment. PVP-Volume 315

    International Nuclear Information System (INIS)

    Prager, M.; Becht, C. IV; Depadova, T.A.; Okazaki, M.; Onyewuenyi, O.A.; Smith, J.P.; Takezono, S.; Weingart, L.J.; Yagi, K.

    1995-01-01

    This volume is part of a series of publications intended to present the technical foundation for broadly accepted practices to establish the mechanical integrity of equipment in service. A focal point for this activity has been a Materials Properties Council program on fitness-for-service (FSS) reported in earlier PVP volumes. Work reported here covers the full range of equipment of interest to petroleum and chemical companies from LNG to creep service and provides a snapshot of current Codes, methods, concerns, and problems. It encompasses crack-like flaws and local thinning situations, welds, clad vessels, storage tanks, and pressure vessels. The work in progress is only a start, and the papers herein should be viewed as part of the process of validating the techniques used. While most of the applications are to petroleum refineries and natural gas processing plants, some papers deal with fossil-fuel power plants, nuclear power plants, synthetic fuels refineries, and materials for high-temperature applications. Papers have been processed separately for inclusion on the data base

  1. Petroleum as a raw material resource for sustainable development

    International Nuclear Information System (INIS)

    Egorov, O.I.

    1996-01-01

    Author notes that for economic and social region development it is necessary has been created large petroleum chemical plants near by Atyrau city (initial raw material - Tengiz, Korolev and other petroleum deposits of this region) and Aktau (Mangistau and Bazuchin petroleum). Realization of projects for structure changes of petroleum and gas region demands a great investments. It is noted that growing scales of petroleum and gas resources mastering calls already a considerable environmental complications because of Caspian Sea's level marking rise

  2. Proceedings of the Canadian International Petroleum Conference 2005 and the 56. Annual Technical Meeting of the Petroleum Society of CIM : Because Technology Changes Everything. CD ed.

    International Nuclear Information System (INIS)

    2005-01-01

    This conference and trade show outlined the latest technologies associated with hydrocarbon exploration, petroleum geology, resource development, and enhanced recovery. It was attended by local and international participants in the petroleum sector. The 31 sessions highlighted the challenges facing the petroleum industry in terms of maturing basins and focused on issues such as business development and risk management; cold production of heavy oil; health, safety and regulatory issues; and environmental concerns regarding oil and gas development. The presentations were targeted for managers, engineers, technologists, geologists, and other petroleum industry specialists dealing with topical issues such as: well completion; well stimulation; well test analysis; thermal recovery; reservoir characterization; fluid characterization; numerical simulation; computerized simulation; emerging technology; thermal field projects; production operations; business development; and refining facilities. A total of 122 papers have been catalogued separately for inclusion in this database. (author)

  3. Statistical handbook for Canada's upstream petroleum industry : technical report

    International Nuclear Information System (INIS)

    2008-01-01

    This document is an up-to-date reference source that summarizes the progress of Canada's petroleum industry. It includes detailed statistical data from 2006 and 2007 in one publication. The handbook features a compilation of key data on major economic sectors of the petroleum industry. It includes real-time drilling, reserves, and production data for crude oil and natural gas along with expenditures by province, revenues, prices, demand, consumption, refining, transportation, imports, and exports. Ethane production was also summarized along with electricity generation capacity in Canada and the status of oil, gas and product pipelines. tabs

  4. Singapore refiners in midst of huge construction campaign

    International Nuclear Information System (INIS)

    Land, R.

    1992-01-01

    This paper reports that Singapore's downstream capacity continues to mushroom. Singapore refiners, upbeat about long term prospects for petroleum products demand in the Asia-Pacific region, and are pressing plans to boost processing capacity. Their plans go beyond capacity expansions. They are proceeding with projects to upgrade refineries to emphasize production of higher value products and to further integrate refining capabilities wit the region's petrochemical industry. Planned expansion and upgrading projects at Singapore refineries call for outlays of more than $1 billion to boost total capacity to about 1.1 million b/d in 1993 and 1.27 million b/d by 1995. That would be the highest level since the mid-1980s, when refiners such as Shell Singapore cut capacity amid an oil glut. Singapore refineries currently are running at effective full capacity of 1.04 million b/d. Meanwhile, Singapore refiners are aggressively courting customers in the Indochina subcontinent, where long isolated centrally planned economies are turning gradually to free markets

  5. Recent Advances in Petroleum Microbiology

    Science.gov (United States)

    Van Hamme, Jonathan D.; Singh, Ajay; Ward, Owen P.

    2003-01-01

    Recent advances in molecular biology have extended our understanding of the metabolic processes related to microbial transformation of petroleum hydrocarbons. The physiological responses of microorganisms to the presence of hydrocarbons, including cell surface alterations and adaptive mechanisms for uptake and efflux of these substrates, have been characterized. New molecular techniques have enhanced our ability to investigate the dynamics of microbial communities in petroleum-impacted ecosystems. By establishing conditions which maximize rates and extents of microbial growth, hydrocarbon access, and transformation, highly accelerated and bioreactor-based petroleum waste degradation processes have been implemented. Biofilters capable of removing and biodegrading volatile petroleum contaminants in air streams with short substrate-microbe contact times (desulfurization processes with biodesulfurization methods through promotion of selective sulfur removal without degradation of associated carbon moieties. However, since microbes require an environment containing some water, a two-phase oil-water system must be established to optimize contact between the microbes and the hydrocarbon, and such an emulsion is not easily created with viscous crude oil. This challenge may be circumvented by application of the technology to more refined gasoline and diesel substrates, where aqueous-hydrocarbon emulsions are more easily generated. Molecular approaches are being used to broaden the substrate specificity and increase the rates and extents of desulfurization. Bacterial processes are being commercialized for removal of H2S and sulfoxides from petrochemical waste streams. Microbes also have potential for use in removal of nitrogen from crude oil leading to reduced nitric oxide emissions provided that technical problems similar to those experienced in biodesulfurization can be solved. Enzymes are being exploited to produce added-value products from petroleum substrates, and

  6. Status of the petroleum pollution in the Wider Caribbean Sea

    Energy Technology Data Exchange (ETDEWEB)

    Botello, Alfonso V; Villanueva F, Susana [Universidad Nacional Autonoma de Mexico, Mexico City (Mexico). Inst. de Ciencias del Mar y Limnologia

    1996-07-01

    In 1976, the IOC-UNESCO and UNEP convened a meeting in Port of Spain to analyze the marine pollution problems in the region and noted that petroleum pollution was of region-wide concern and recommended to initiate a research and monitoring program to determine the severity of the problem and monitor its effects. Actually, the Wider Caribbean is potentially one of the largest oil producing areas in the world. Major production sites include Louisiana and Texas; USA; the Bay of Campeche, Mexico; Lake Maracaibo, Venezuela; and the Gulf of Paria, Trinidad; all which are classified as production accident high-risk zones. Main sources of petroleum pollution in the Wider Caribbean are: production, exploitation, transportation, urban and municipal discharges, refining and chemical wastes, normal loading operations and accidental spills. About 5 million of barrels are transported daily in the Caribbean, thus generating an intense tanker traffic. It has been estimated that oil discharges from tank washings within the Wider Caribbean could be as high as 7 millions barrels/year. The results of the CARIPOL Regional Programme conducted between 1980-1987 pointed out that a significant levels of petroleum pollution exists throughout the Wider Caribbean and include serious tar contamination of windward exposed beaches, high levels of floating tar within the major currents system and very high levels of dissolved/dispersed hydrocarbons in surface waters. Major effects of this petroleum pollution include: high tar level on many beaches that either prevent recreational use or require very expensive clean-up operations, distress and death to marine life and responses in the enzyme systems of marine organisms that have been correlated with declines in reproductive success. Finally the presence of polycyclic aromatic hydrocarbons in tissues of important economic species have been reported with its potential carcinogenic effects. (author)

  7. Status of the petroleum pollution in the Wider Caribbean Sea

    International Nuclear Information System (INIS)

    Botello, Alfonso V.; Villanueva F, Susana

    1996-01-01

    In 1976, the IOC-UNESCO and UNEP convened a meeting in Port of Spain to analyze the marine pollution problems in the region and noted that petroleum pollution was of region-wide concern and recommended to initiate a research and monitoring program to determine the severity of the problem and monitor its effects. Actually, the Wider Caribbean is potentially one of the largest oil producing areas in the world. Major production sites include Louisiana and Texas; USA; the Bay of Campeche, Mexico; Lake Maracaibo, Venezuela; and the Gulf of Paria, Trinidad; all which are classified as production accident high-risk zones. Main sources of petroleum pollution in the Wider Caribbean are: production, exploitation, transportation, urban and municipal discharges, refining and chemical wastes, normal loading operations and accidental spills. About 5 million of barrels are transported daily in the Caribbean, thus generating an intense tanker traffic. It has been estimated that oil discharges from tank washings within the Wider Caribbean could be as high as 7 millions barrels/year. The results of the CARIPOL Regional Programme conducted between 1980-1987 pointed out that a significant levels of petroleum pollution exists throughout the Wider Caribbean and include serious tar contamination of windward exposed beaches, high levels of floating tar within the major currents system and very high levels of dissolved/dispersed hydrocarbons in surface waters. Major effects of this petroleum pollution include: high tar level on many beaches that either prevent recreational use or require very expensive clean-up operations, distress and death to marine life and responses in the enzyme systems of marine organisms that have been correlated with declines in reproductive success. Finally the presence of polycyclic aromatic hydrocarbons in tissues of important economic species have been reported with its potential carcinogenic effects. (author)

  8. Our petroleum challenge : sustainability into the 21. century. 7. ed.

    International Nuclear Information System (INIS)

    Bott, R.D.; Carson, D.M.; Henderson, J.W.

    2004-01-01

    The Canadian Centre for Energy Information provides accurate information on all aspects of Canada's energy sector. This report reviews Canada's petroleum resources and the role they play in society. In particular, it discussed the origins of crude oil and natural gas, exploration, production, processing, transportation, refining, marketing and end-use. The report is intended for a diverse audience interested in hydrocarbons, natural gas, crude oil, bitumen, gasoline, petroleum, natural gas liquids, and liquefied natural gas. The report explains the science and technology of the upstream and downstream petroleum industry. Canada's hydrocarbon legacy was described in the first section, followed by exploration, land use, seismic surveys, drilling, and production issues. The challenges and opportunities facing the industry in the twenty-first century were also discussed with reference to sustainable development. Business aspects were also outlined in terms of revenues, public interest, petroleum prices, and employment. refs., tabs., figs

  9. Oil refining and product market developments in Europe

    International Nuclear Information System (INIS)

    McDonald, P.

    1991-01-01

    One political development in Europe that will affect the petroleum refining industry is the opening of a single market among the European Commission countries. Although the single market officially opens on January 1, 1993, a single market for energy will not happen at that time. Most European countries feel that refining is a strategic industry and adopt some form of protectionism in this sector. Environmental policy in Europe tends to be separate from energy policy, making conflicts in setting standards for emissions and fuel composition somewhat inevitable. For example, both environmental and energy policies favor a carbon tax on fuels; the EC environmental commission does not want to be seen as favoring nuclear power, so it favors penalizing all fuels about the same amount, while the energy commission says the carbon tax should be related to the fuel carbon content. A measure affecting the refining industry is the proposal for reducing sulfur in diesel fuel. By 1994 EC countries will have a common 0.2% standard and by 1996 a 0.05% standard for automotive diesel. To meet the latter standard, refineries will need upgrading at an estimated cost of US$4 billion. Another political consideration for the refining industry is whether eastern Europe should be part of the EC energy community. However, if there is a reluctance in the western European countries for a single western market, there is even less enthusiasm for an energy market that includes eastern Europe as well. In addition, there is a reluctance to accept that there should be a free flow of petroleum products from east to west

  10. Integrated report on the toxicological mitigation of coal liquids by hydrotreatment and other processes. [Petroleum and coal-derived products

    Energy Technology Data Exchange (ETDEWEB)

    Guerin, M.R.; Griest, W.H.; Ho, C.H.; Smith, L.H.; Witschi, H.P.

    1986-06-01

    Research here on the toxicological properties of coal-derived liquids focuses on characterizing the refining process and refined products. Principle attention is given to the potential tumorigenicity of coal-derived fuels and to the identification of means to further reduce tumorigenicity should this be found necessary. Hydrotreatment is studied most extensively because it will be almost certainly required to produce commercial products and because it is likely to also greatly reduce tumorigenic activity relative to that of crude coal-liquid feedstocks. This report presents the results of a lifetime C3H mouse skin tumorigenicity assay of an H-Coal series of oils and considers the relationships between tumorigenicity, chemistry, and processing. Lifetime assay results are reported for an H-Coal syncrude mode light oil/heavy oil blend, a low severity hydrotreatment product, a high severity hydrotreatment product, a naphtha reformate, a heating oil, a petroleum-derived reformate, and a petroleum derived heating oil. Data are compared with those for an earlier study of an SRC-II blend and products of its hydrotreatment. Adequate data are presented to allow an independent qualitative assessment of the conclusions while statistical evaluation of the data is being completed. The report also documents the physical and chemical properties of the oils tested. 33 refs., 14 figs., 53 tabs.

  11. European refining trends to 2030: The advent of multi-area linear programming

    International Nuclear Information System (INIS)

    Saint-Antonin, V.; Marion, P.

    2011-01-01

    The current high degree of uncertainty that pervades the global energy landscape is directly impacting on the oil industry, which is having to integrate growing mobility requirements in the context of energy transition due to the emergence of alternatives to petroleum fuels and restrictions on pollutant emissions. In this context, the study 'Raffinage 2030' (Refining 2030), carried out by IFPEN (the French Institute of Petroleum and New Energy Sources), is a prospective exercise for a better understanding of the balance between global supply and demand of petroleum products in order to shed light on the type and geographical location of necessary investments in refineries, as well as to assess the impact on these of the introduction of new fuels and more and more restrictions, such as environmental regulations. To this end, the refinery model used is one of linear programming, breaking the world down into nine geographical areas. This article introduces the programming model and its basic assumptions, before presenting the main lessons drawn om this study regarding the potential evolutions of the refining industry, in particular the European one, to face the market's long term trends. (authors)

  12. Taking the petroleum out of petrochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, T

    1982-01-01

    It is thought to be inevitable that world production of petroleum will start declining in the not too distant future. When this happens, the only feedstock for the organic chemicals industry and the polymer chemistry industry will be coal. It is emphasized that the best way of substituting coal for petroleum fractions as an alternative energy source is the technologically easy conversion of economic coal to methanol. There are explanations of the problems involved in obtaining fuel methanol as an energy source, as feedstock for the chemical industry, and as a raw material for chemistry. (13 refs.)

  13. Synthesis of Versatile Chemicals through Oxidative Dehydrogenation on Solid Catalysts of Non-Petroleum Resource

    OpenAIRE

    Sugiyama, Shigeru; Nagai, Yuya; Sakamoto, Naotaka; Ohtake, Naotaka; Katoh, Masahiro

    2016-01-01

    To prepare 1,3-butadiene, one of versatile chemicals, from 1-butene, one of the main components in liquefied petroleum gas (LPG), the oxidative dehydrogenation of 1-butene on α-Bi2Mo3O12 doped with cerium was examined. Regardless to the doped amount of cerium, the conversion of 1-butene was constant while the selectivity to 1,3-butadiene decreased with the doped amount of cerium, while the selectivities to 2-butenes, CO and CO2 increased. It is concluded that the introduction of cerium into α...

  14. Chemical Composition and Cytotoxic Activities of Petroleum Ether ...

    African Journals Online (AJOL)

    Methods: The composition of petroleum ether extract was analyzed by gas ... acids, sterides, pregnanones, terpenes, alkaloids, alkenes, alcohols, ketones, aldehydes and other compounds. .... and mass spectra with those obtained from the.

  15. The changing face of U.S. refining: Ominous notes

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    As environmental protection comes of age in the US, a complex series of structural changes is also expected - in enforcement bureaucracy, manufacturing, and in energy consumption. It is already quite obvious in the petroleum refining industry. A side effect may be the export of jobs. Buyouts and closures are expected, as is increased refined product import dependency. This issue updates expected changes in gasoline and distillate product requirements in the US, and reports some ominous statements from some of the oil industry's affected parties. This issue also presented the following: (1) the ED Refining Netback Data Series for the US Gulf and West Coasts, Rotterdam, and Singapore as of Jan. 24, 1992; and (2) the ED Fuel Price Tax Series for countries of the Eastern Hemisphere, Jan. 1992 edition

  16. 40 CFR 721.7020 - Distillates (petroleum), C(3-6), polymers with styrene and mixed terpenes (generic name).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Distillates (petroleum), C(3-6... CHEMICAL SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.7020 Distillates (petroleum... significant new uses subject to reporting. (1) The chemical substance distillates (petroleum), C(3-6...

  17. Use of advanced chemical fingerprinting in PAH source identification and allocation at a coal tar processing site

    International Nuclear Information System (INIS)

    Brown, J.S.; Boehm, P.D.; Douglas, G.S.

    1995-01-01

    Advanced chemical fingerprinting analyses were used to determine source allocation at a former coal tar processing facility which had been converted to a petroleum recycling site. Soil samples from the site had high petroleum hydrocarbon concentrations and elevated levels of polynuclear aromatic hydrocarbons (PAH). Comparisons of PAH distributions were used to differentiate the coal tar hydrocarbons from the petroleum hydrocarbons in soil samples. A more specific technique was needed to accurately allocate the contribution of the two sources to the observed PAH contamination in the soil. Petroleum biomarkers (steranes and triterpanes) which are present in crude oils and many refined petroleum products but are absent in coal tar were used to quantitatively allocate the source of the PAH contamination based on the relative ratio of the PAH to the biomarkers in soil samples. Using the resulting coal tar/petroleum source ratio the contribution of petroleum to the overall PAH contamination at the site was calculated. A multivariate statistical technique (principal component analysis or PCA) was used to provide an independent validation of the source allocation. The results of the source allocation provided a foundation for the site clean-up and remediation costs

  18. Energy and public health: the challenge of peak petroleum.

    Science.gov (United States)

    Frumkin, Howard; Hess, Jeremy; Vindigni, Stephen

    2009-01-01

    Petroleum is a unique and essential energy source, used as the principal fuel for transportation, in producing many chemicals, and for numerous other purposes. Global petroleum production is expected to reach a maximum in the near future and to decline thereafter, a phenomenon known as "peak petroleum." This article reviews petroleum geology and uses, describes the phenomenon of peak petroleum, and reviews the scientific literature on the timing of this transition. It then discusses how peak petroleum may affect public health and health care, by reference to four areas: medical supplies and equipment, transportation, energy generation, and food production. Finally, it suggests strategies for anticipating and preparing for peak petroleum, both general public health preparedness strategies and actions specific to the four expected health system impacts.

  19. EIA model documentation: Petroleum Market Model of the National Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-30

    The purpose of this report is to define the objectives of the Petroleum Market Model (PMM), describe its basic approach, and provide detail on how it works. This report is intended as a reference document for model analysts, users, and the public. Documentation of the model is in accordance with EIA`s legal obligation to provide adequate documentation in support of its models (Public Law 94-385, section 57.b.2). The PMM models petroleum refining activities, the marketing of products, the production of natural gas liquids and domestic methanol, projects petroleum provides and sources of supplies for meeting demand. In addition, the PMM estimates domestic refinery capacity expansion and fuel consumption.

  20. Taxes on petroleum products in western Europe have increased until three times as much as receipts by barrel of OPEC countries

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    If the petroleum prices have increased in Europe and in Japan, that because of costs and profits of refining and distribution and above all because of taxes. In 1984 the part of taxes was 35% ($21/b) and in 1993 the part is 61% ($52.88/b) during this time the petroleum price fell down from 48% ($28.8/b) to 19% ($16.47). The part of costs and profits of companies (refining and distribution) increased from 17% ($10.20/b) to 20% ($17.34/b)

  1. Chemical structure investigation on SFEF fractions of Dagang vacuum residue

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Z.; Yan, G.; Zhao, S.; Guo, S. [China Univ. of Petroleum, Beijing (China). State Key Laboratory of Heavy Oil Processing; Zhang, Z. [Beijing Aeronautical Technology Research Center, Beijing (China)

    2006-07-01

    One of the most important problems in petroleum chemistry is the molecular structure and composition of heavy oil fractions and its importance in applications pertaining to the recovery, refining, and upgrading of petroleum. This paper presented an investigation into the chemical structure on supercritical fluid extraction and fraction (SFEF) factions of Dagang vacuum residue. Dagang vacuum residue was cut into sixteen fractions and a tailing with SFEF instrument. Then, using a chromatography, all SFEF fractions were further separated into four group compositions, notably saturated hydrocarbons, aromatic hydrocarbons, resins and asphaltenes (SARA). Last, the chemical structure was explored through a thorough analysis of the products from the ruthenium ions-catalyzed oxidation (RICO) reaction of those aromatics, resins and asphaltenes. The paper discussed the experiment in terms of samples and chemicals; supercritical fluid extraction and fraction; SARA separation; and RICO. The results and discussions focused on alkyl side chains attached to aromatic carbon; polymethylene bridges connecting two aromatic units; benzenecarboxylic acids an aromatic units; and others. The study has brought to light useful characterization on covalent molecular structure of two typical SFEF fractions, notably the tenth and fifteen fraction. 17 refs., 6 tabs., 16 figs., 1 appendix.

  2. Wood chemical composition as related to properties of handsheets made from loblolly pine refiner groundwood

    Science.gov (United States)

    Charles W. McMillin

    1969-01-01

    Burst and tear strengths of handsheets made from 48 pulps disk-refined from chips of varying chemical composition decreased with incressing extractive content after the independent effects of fiber morphology were specified. This result was attributed to lessened bond strength caused by reduced surface tension forces and blocking of reactive sites on the fiber surfaces...

  3. Comparison of Some Rural Wastewater Refining Systems Considering Chemical Properties and Heavy Metals

    Directory of Open Access Journals (Sweden)

    Najme Yazdanpanah

    2016-02-01

    compared to the value of the same variable at the inlet. Also, the percentage change of wastewater properties at the outlet ratio to the inlet values in the refining systems was calculated. Meanwhile, the efficiency was evaluated using permissible values reported by the Environmental Protection Organization of Iran. Results and Discussion: The results showed that after purification, the amounts of DO, Cd and Mo were not significantly different among the studied systems, while, the other parameters were found to be similar. In almost all the cases, the amounts of pollutants decreased at the outlets, nevertheless considering the permissible standards, just in few cases the pollution was reduced. Moreover, in comparison to the standard values, the amount of TP increased, while Turbidity decreased. Additionally, the amount of DO was higher than the threshold values. As a result of purification in all the studied systems, the concentrations of Cd and Pb were reduced, whereas the concentration of Ni increased. Also, the concentrations of heavy metals, except Mo were less than the standard values. Conclusion: It was concluded that the selected refining systems had limited performance in the purification of wastewater in the studied rural areas. However, the amounts of pollutants showed some reductions at the outlets, based on the permissible standards reported by the Environmental Protection Organization of Iran. In just a few cases the pollution indices were reduced. In fact, the septic tank systems could not remove the chemical pollutants from wastewaters, although the best performance was observed for TSS and Turbidity, which were reduced with respect to permissible levels. The amounts of BOD and COD were higher than the standard values, indicating low efficiency of the refining systems in removal of chemical and biological agents. Also, the concentration of TP was found to be higher than the permissible level. The entrance of phosphorous into the surface runoff and water

  4. Logistics aspects of pipeline transport in the supply of petroleum products

    Directory of Open Access Journals (Sweden)

    Wessel Pienaar

    2008-09-01

    Full Text Available The commercial transportation of crude oil and petroleum products by pipeline is receiving increased attention in South Africa. Transnet Pipeline Transport has recently obtained permission from the National Energy Regulator of South Africa (Nersa to construct and operate a new petroleum products pipeline of 60 cm diameter from Durban to Gauteng. At an operating speed of 10 km/h the proposed 60 cm Transnet pipeline would be able to deliver 3,54 million litres of petroleum product per hour. This is equivalent to 89 deliveries per hour using road tank vehicles with an average carrying capacity of 40 000 litres of fuel per vehicle. This pipeline throughput is also equivalent to two trains departing per hour, each consisting of 42 petroleum tank wagons with an average carrying capacity of 42 500 litres of fuel per wagon. Considering that such road trucks and rail wagons return empty to the upstream refineries in Durban, it is clear that there is no tenable long-term alternative to pipeline transport:pipeline transport is substantially cheaper than road and rail transport;pipeline transport is much safer than rail and especially road transport; andpipeline transport frees up alternative road and rail transport capacity.Pipeline transport is a non-containerised bulk mode of transport for the carriage of suitable liquids (for example, petroleum commodities, which include crude oil, refined fuel products and liquid petro-chemicals, gas, slurrified coal and certain water-suspended ores and minerals. InSouth Africa, petroleum products account for the majority of commercial pipeline traffic, followed by crude oil and natural gas. There are three basic types of petroleum pipeline transport systems:Gathering pipeline systemsCrude oil trunk pipeline systemsRefined products pipeline systems Collectively, these systems provide a continuous link between extraction, processing, distribution, and wholesalers’ depots in areas of consumption. The following

  5. Refining and blending of aviation turbine fuels.

    Science.gov (United States)

    White, R D

    1999-02-01

    Aviation turbine fuels (jet fuels) are similar to other petroleum products that have a boiling range of approximately 300F to 550F. Kerosene and No.1 grades of fuel oil, diesel fuel, and gas turbine oil share many similar physical and chemical properties with jet fuel. The similarity among these products should allow toxicology data on one material to be extrapolated to the others. Refineries in the USA manufacture jet fuel to meet industry standard specifications. Civilian aircraft primarily use Jet A or Jet A-1 fuel as defined by ASTM D 1655. Military aircraft use JP-5 or JP-8 fuel as defined by MIL-T-5624R or MIL-T-83133D respectively. The freezing point and flash point are the principle differences between the finished fuels. Common refinery processes that produce jet fuel include distillation, caustic treatment, hydrotreating, and hydrocracking. Each of these refining processes may be the final step to produce jet fuel. Sometimes blending of two or more of these refinery process streams are needed to produce jet fuel that meets the desired specifications. Chemical additives allowed for use in jet fuel are also defined in the product specifications. In many cases, the customer rather than the refinery will put additives into the fuel to meet their specific storage or flight condition requirements.

  6. 17th International Conference on Petroleum Phase Behavior and Fouling

    DEFF Research Database (Denmark)

    von Solms, Nicolas; Yan, Wei; Andersen, Simon

    2017-01-01

    This special section of Energy & Fuels contains contributedpapers from the 17th International Conference on PetroleumPhase Behavior and Fouling (Petrophase 2016). Petrophase 2016 was organized by the Technical University of Denmark and Schlumberger and took place in Elsinore (Helsingør) Denmark...... from June 19th to 23rd at the Beach Hotel Marienlyst. Petrophase is an international conference aimed at researchers in industry and academia dedicated to the study of the properties and chemistry of petroleum fluids and their effect on producing, processing, and refining in the upstream, midstream......, and downstream industries. The conference started in 1999 as “The International Conference on Petroleum Phase Behavior & Fouling” and has since evolved into an annual event taking place in countries all around the world. Petrophase has been fortunate to have enjoyed financial and organizational support from many...

  7. China's new oil import status underpins world's most dynamic petroleum scene

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    China is poised to become a net importer of oil in 1994--95. That sets the stage for China importing more than 1 million b/d of crude oil and refined products on a net basis by the turn of the century. That development underpins a bigger story -- arguably the biggest story on the petroleum scene today. The turnabout that is seeing the world's fifth biggest oil producer go from significant oil exporter in recent years to major oil importer by the turn of the century points to several other truisms in the petroleum industry: That an oil demand surge in the Asia-Pacific region led by China will fuel overall world oil demand growth for years to come; that a refining and petrochemical boom in a country that accounts for about one fifth of the world's population has dramatic implications for those two industries; that privatization has gathered so much momentum in the global petroleum industry that even Communist China has embraced some form of it; that China's domestic crude supply shortfall is creating unprecedented opportunities for foreign upstream investors in one of the world's most prospective yet underexplored and underexploited regions; and that the same new openness that is distinguishing China's petroleum industry today is turning some of its state owned companies into major competitors to be reckoned with on the international scene, upstream and downstream. The paper discusses China's oil export/import balance, supply/demand outlook, policy changes, and new regulations governing export of crude oil and products

  8. Technological innovation and environmental regulation at the petroleum refining industry: the Paulinia refinery case; Inovacao tecnologica e regulacao ambiental na industria de refino de petroleo: o caso da Refinaria de Paulinia

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Adalberto Mantovani Martiniano de; Pereira, Newton Mueller [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil). Inst. de Geociencias. Dept. de Politica Cientifica e Tecnologica]. E-mails: adalba@ige.unicamp.br; newpe@ige.unicamp.br

    2006-07-01

    This article discusses the influence of environmental regulation on the adoption of new production techniques and on the improvement of existing techniques in the refining petroleum industry, namely at the Paulinia refinery (REPLAN). Describes the techniques adopted in order to fit refining processes into the regulation about environmental impacts (related to the protection of resources like water, air and soil), and also techniques adopted in order to produce less pollutant diesel and gasoline. This article has support on bibliographic research and data collected in REPLAN and CENPES, which permit characterize technologies adopted in REPLAN at the end of the 90s and the regulatory rules that drive them. The regulation is presented under an evolutionary approach, considering that technology develops along whit the socio-economic context, the environmental regulation is a related element which determines the search and selection of technologies able to comply with regulation ensuring economic viability. Regulation is also a determinant factor for the adoption of innovations in the refining industry. Specifically in REPLAN, the environmental regulation has required large investments in order to comply processes and products with the established standards. (author)

  9. Need for refining capacity creates opportunities for producers in Middle East

    International Nuclear Information System (INIS)

    Ali, M.S.S.

    1994-01-01

    Oil industry interest in refining has revived in the past few years in response to rising oil consumption. The trend creates opportunities, for countries in the Middle East, which do not own refining assets nearly in proportion to their crude oil reserved. By closing this gap between reserves and refining capacity, the countries can ease some of the instability now characteristic of the oil market. Some major oil producing countries have begun to move downstream. During the 1980s, Venezuela, Kuwait, Saudi Arabia, Libya, and other members of the Organization of Petroleum Exporting Countries acquired refining assets through direct total purchase or joint ventures. Nevertheless, the oil industry remains largely unintegrated, with the Middle East holding two thirds of worldwide oil reserves but only a small share downstream. As worldwide refining capacity swings from a period of surplus toward one in which the need for new capacity will be built. The paper discusses background of the situation, shrinking surplus, investment requirements, sources of capital, and shipping concerns

  10. Impact of petroleum products on soil composition and physical-chemical properties

    Science.gov (United States)

    Brakorenko, N. N.; Korotchenko, T. V.

    2016-03-01

    The article describes the grain-size distribution, physical and mechanical properties, swelling and specific electrical resistivity of soils before and after the contact with petroleum products. The changes in mechanical properties of soils contaminated with petroleum products have been stated. It leads to the increase in compressibility values, decline in internal friction angle and cohesion.

  11. Impact of petroleum products on soil composition and physical-chemical properties

    OpenAIRE

    Brakorenko, Nataliya Nikolaevna; Korotchenko, Tatiana Valerievna

    2016-01-01

    The article describes the grain-size distribution, physical and mechanical properties, swelling and specific electrical resistivity of soils before and after the contact with petroleum products. The changes in mechanical properties of soils contaminated with petroleum products have been stated. It leads to the increase in compressibility values, decline in internal friction angle and cohesion.

  12. A review of metal recovery from spent petroleum catalysts and ash.

    Science.gov (United States)

    Akcil, Ata; Vegliò, Francesco; Ferella, Francesco; Okudan, Mediha Demet; Tuncuk, Aysenur

    2015-11-01

    With the increase in environmental awareness, the disposal of any form of hazardous waste has become a great concern for the industrial sector. Spent catalysts contribute to a significant amount of the solid waste generated by the petrochemical and petroleum refining industry. Hydro-cracking and hydrodesulfurization (HDS) catalysts are extensively used in the petroleum refining and petrochemical industries. The catalysts used in the refining processes lose their effectiveness over time. When the activity of catalysts decline below the acceptable level, they are usually regenerated and reused but regeneration is not possible every time. Recycling of some industrial waste containing base metals (such as V, Ni, Co, Mo) is estimated as an economical opportunity in the exploitation of these wastes. Alkali roasted catalysts can be leached in water to get the Mo and V in solution (in which temperature plays an important role during leaching). Several techniques are possible to separate the different metals, among those selective precipitation and solvent extraction are the most used. Pyrometallurgical treatment and bio-hydrometallurgical leaching were also proposed in the scientific literature but up to now they did not have any industrial application. An overview on patented and commercial processes was also presented. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Toxicity of oils and petroleum hydrocarbons to estuarine crustaceans

    Energy Technology Data Exchange (ETDEWEB)

    Tatem, H.E. (Army Engineer Waterways Experiment Station, Vicksburg, MS); Cox, B.A.; Anderson, J.W.

    1978-04-01

    Bioassay experiments with various life stages of three estuarine shrimp and soluble petroleum hydrocarbons (PH) revealed residual Bunker C oil and refined No. 2 fuel oil to be more toxic than two crude oils tested. Larvae of Palaemonetes pugio were slightly more sensitive to the PH than adults, while young penaeid shrimp were shown to be more resistant than older, larger individuals. Shrimp exposed to PH in conjunction with temperature and salinity changes were more susceptible to the PH. Some common aromatic and diaromatic PH, including three naphthalene compounds, were utilized in bioassays. Naphthalenes were highly toxic. The toxicity of petroleum products is closely related to aromatic hydrocarbon content, especially the naphthalenes and related hydrocarbons.

  14. China's oil market and refining sector

    International Nuclear Information System (INIS)

    Yamaguchi, N.D.; Fridley, D.G.

    2000-01-01

    The article assesses the future for China's oil industry as the country makes the transition from a command economy to an international market. China has one of the world's biggest oil industries and recent years have seen much growth in exploration and development, refining capacity and trade. China is more and more dependent on oil imports and is now a major international player; it has attracted much outside investment. Diagrams show (i) how coal dominates other sources of energy in China; (ii) crude production 1977-1998; (iii) how Middle East crudes now dominate Chinese crude imports; (iv) the growth of petroleum demand in China; (v) the Chinese demand for petroleum products; (vi) the growth in transport fuels; (vii) Chinese product imports: import ban targeted diesel; (viii) crude imports favoured over product imports and (ix) refinery capacity and throughput. The changes are expected to result in further integration into international markets, increased transparency and a healthier oil business

  15. Privatization of Brazil's petroleum sector on track despite scandal

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that the push to privatize Brazil's petroleum sector remains on track despite the taint of scandal that hit state oil company Petroleos Brasileiro SA and the ensuing political crisis for the administration of President Fernando Collor de Mello. Collor's efforts to reform Brazil's beleaguered economy have focused heavily on privatizing state-owned companies by selling assets or ending monopolies. Nowhere is that task more daunting than with Petrobras, one of the world's biggest petroleum companies, which has an entrenched monopoly over most upstream and downstream operations in the country. Collor and the energy ministers and chiefs of Petrobras during his administration have pressed measured to inject free market principles in Brazil's petroleum sector. The Collor administration earlier this year sent a bill to Brazil's Congress calling for a constitutional amendment to end Petrobras monopoly over exploration, production, transportation, refining, and exports and imports of oil and gas. The amendment is expected to be voted upon in 1993

  16. PEMEX: The Mexican state petroleum agency

    International Nuclear Information System (INIS)

    1993-03-01

    An overview is presented of the Mexican state petroleum company PEMEX. The Mexican government created PEMEX through the expropriation of the largely foreign-dominated industry. Mexico is the world's fifth largest crude oil producer, and in 1992 PEMEX had proven reserves of 65.5 billion bbl, crude production of 2.668 million bbl/d, gas production of 3.6 billion cubic feet per day, refined product production of 1.57 million bbl/d and 18 million tonnes of petrochemical production per year. A background is presented of Mexico's economy, followed by discussion of PEMEX's market, the best sales prospects for foreign suppliers, a company profile, financial structure, exploration and production, refining, gas and basic petrochemicals, petrochemicals, transportation and distribution, research and development, recent activities, planned future activities, procurement, and market access. Extensive appendices supply relevant contacts and information. 30 tabs

  17. Chinese refining capacity for Canadian heavy oil

    International Nuclear Information System (INIS)

    Bruce, G.W.

    2006-01-01

    This paper discussed China's refining capacity in relation to exports of Canadian heavy oil. Demand for oil is increasing throughout the world, and China is expected to consume 25 per cent of the projected yearly oil supplies. Alberta currently has an estimated 174 billion barrels of recoverable bitumen, and produces 1.06 million barrels per day. Production is expected to increase to 4.5 million barrels per day by the year 2020. Currently bitumen blends are refined and diluted with naphtha and sweet synthetic crude oil. Bitumen is a challenging feedstock for refineries, and requires thermal production methods or gasification processes. Primary conversion into sour synthetic crude is typically followed by hydrocracking and further refining into finished petroleum products. There are currently 50 refineries in China with a 7.4 million barrel per day capacity. Coastal refineries using imported crude oil have a 4 million barrel per day capacity. New facilities are being constructed and existing plants are being upgraded in order to process heavier and more sour crude oils. However, current refining capabilities in Chinese refineries have a limited ability for resid conversion. It was concluded that while China has a refining infrastructure, only refineries on the coast will use oil sands-derived feedstocks. However, there are currently opportunities to design refineries to match future feedstocks. tabs., figs

  18. Acoustic-wave sensor apparatus for analyzing a petroleum-based composition and sensing solidification of constituents therein

    Science.gov (United States)

    Spates, J.J.; Martin, S.J.; Mansure, A.J.

    1997-08-26

    An acoustic-wave sensor apparatus and method are disclosed. The apparatus for analyzing a normally liquid petroleum-based composition includes at least one acoustic-wave device in contact with the petroleum-based composition for sensing or detecting the presence of constituents (e.g. paraffins or petroleum waxes) therein which solidify upon cooling of the petroleum-based composition below a cloud-point temperature. The acoustic-wave device can be a thickness-shear-mode device (also termed a quartz crystal microbalance), a surface-acoustic-wave device, an acoustic-plate-mode device or a flexural plate-wave device. Embodiments of the present invention can be used for measuring a cloud point, a pour point and/or a freeze point of the petroleum-based composition, and for determining a temperature characteristic of each point. Furthermore, measurements with the acoustic-wave sensor apparatus can be made off-line by using a sample having a particular petroleum-based composition; or in-situ with the petroleum-based composition contained within a pipeline or storage tank. The acoustic-wave sensor apparatus has uses in many different petroleum technology areas, including the recovery, transport, storage, refining and use of petroleum and petroleum-based products. 7 figs.

  19. Wavelet-based Adaptive Mesh Refinement Method for Global Atmospheric Chemical Transport Modeling

    Science.gov (United States)

    Rastigejev, Y.

    2011-12-01

    Numerical modeling of global atmospheric chemical transport presents enormous computational difficulties, associated with simulating a wide range of time and spatial scales. The described difficulties are exacerbated by the fact that hundreds of chemical species and thousands of chemical reactions typically are used for chemical kinetic mechanism description. These computational requirements very often forces researches to use relatively crude quasi-uniform numerical grids with inadequate spatial resolution that introduces significant numerical diffusion into the system. It was shown that this spurious diffusion significantly distorts the pollutant mixing and transport dynamics for typically used grid resolution. The described numerical difficulties have to be systematically addressed considering that the demand for fast, high-resolution chemical transport models will be exacerbated over the next decade by the need to interpret satellite observations of tropospheric ozone and related species. In this study we offer dynamically adaptive multilevel Wavelet-based Adaptive Mesh Refinement (WAMR) method for numerical modeling of atmospheric chemical evolution equations. The adaptive mesh refinement is performed by adding and removing finer levels of resolution in the locations of fine scale development and in the locations of smooth solution behavior accordingly. The algorithm is based on the mathematically well established wavelet theory. This allows us to provide error estimates of the solution that are used in conjunction with an appropriate threshold criteria to adapt the non-uniform grid. Other essential features of the numerical algorithm include: an efficient wavelet spatial discretization that allows to minimize the number of degrees of freedom for a prescribed accuracy, a fast algorithm for computing wavelet amplitudes, and efficient and accurate derivative approximations on an irregular grid. The method has been tested for a variety of benchmark problems

  20. Panorama of the petroleum industry; Panorama de l'industrie petroliere

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-05-15

    This document provides tables and charts of statistical data concerning the petroleum industry activity in 2002: supply and demand, prices, consumption, service station number and the market. A second part is devoted to the fuel quality and air quality: the constant improvement of the fuels and the investments refining/distribution. (A.L.B.)

  1. Petroleum Oils

    Science.gov (United States)

    Different types of crude oil and refined product, of all different chemical compositions, have distinct physical properties. These properties affect the way oil spreads and breaks down, its hazard to marine and human life, and the likelihood of threat.

  2. Advances in metabolic pathway and strain engineering paving the way for sustainable production of chemical building blocks.

    Science.gov (United States)

    Chen, Yun; Nielsen, Jens

    2013-12-01

    Bio-based production of chemical building blocks from renewable resources is an attractive alternative to petroleum-based platform chemicals. Metabolic pathway and strain engineering is the key element in constructing robust microbial chemical factories within the constraints of cost effective production. Here we discuss how the development of computational algorithms, novel modules and methods, omics-based techniques combined with modeling refinement are enabling reduction in development time and thus advance the field of industrial biotechnology. We further discuss how recent technological developments contribute to the development of novel cell factories for the production of the building block chemicals: adipic acid, succinic acid and 3-hydroxypropionic acid. Copyright © 2013 Elsevier Ltd. All rights reserved.

  3. Surface active agents from Egyptian petroleum distillates

    Energy Technology Data Exchange (ETDEWEB)

    Kassem, T.M.

    Kerosene and solar distillates from local crude petroleum 'Morgan' were fractionated. These fractions were refined with oleum and then distilled. The normal paraffins were separated from the refined fractions by the urea adduction technique. These paraffin cuts were subjected to 50% chlorination and the obtained monochlorinated paraffins were used in the synthesis of alkylbenzenes and alkyldiphenyls which were converted to anionic surfactants by sulphonation with 95% sulphuric acid. The sulphonyl chlorides of alkylbenzenes and of alkyldiphenyls were prepared and then converted to the corresponding sulphonamides. The prepared sulphonamides were then processed to nonionic surfactants through condensation with ethylene oxide. The ethoxylates were sulphated with chlorosulphonic acid and phosphated with phosphorus pentoxide to anionic surfactants. The surface active properties and the biodegradability of all the prepared surfactants were determined.

  4. Solid wastes management in petroleum refineries; Gerenciamento de residuos solidos em refinarias de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Lizabela Souza de [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica]|[Agencia Nacional de Petroleo, Brasilia, DF (Brazil)]. E-mail: lizabela@eq.ufrj.br; Nicolaiewsky, Elioni [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica. Dept. de Engenharia Quimica]. E-mail: elioni@eq.ufrj.br; Freire, Denize Dias de Carvalho [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica. Dept. de Engenharia Bioquimica]. E-mail: denize@eq.ufrj.br

    2002-07-01

    This work performs a survey on the solid wastes generated from petroleum refining activities. The possible environmental impacts are analysed and procedures for disposal and treatment are suggested. The treatment techniques are detached: minimization, incineration, co-processing, bioremediation and industrial embankments.

  5. Gamma-ray scanning for troubleshooting and optimisation of distillation columns in petroleum refineries and chemical plants

    International Nuclear Information System (INIS)

    Jaafar Abdullah

    2001-01-01

    The technique and facilities for gamma-ray scanning have been developed by the Plant Assessment Technology (PAT) Group at the Malaysian Institute for Nuclear Technology Research (MINT). The technology has been successfully used for on-line troubleshooting and investigation of various types of distillation columns in petroleum refineries, gas processing installations and chemical plants in the country and the region. This paper outlines the basic principle of the technology and describes the inspection procedures, and in addition, a few case studies are presented. (Author)

  6. Niobium-base grain refiner for aluminium

    International Nuclear Information System (INIS)

    Silva Pontes, P. da; Robert, M.H.; Cupini, N.L.

    1980-01-01

    A new chemical grain refiner for aluminium has been developed, using inoculation of a niobium-base compound. When a bath of molten aluminium is inoculated whith this refiner, an intermetallic aluminium-niobium compound is formed which acts as a powerful nucleant, producing extremely fine structure comparable to those obtained by means of the traditional grain refiner based on titanium and boron. It was found that the refinement of the structure depends upon the weight percentage of the new refiner inoculated as well as the time of holding the bath after inoculation and before pouring, but mainly on the inoculating temperature. (Author) [pt

  7. Middle East oil refining in the World context

    International Nuclear Information System (INIS)

    Jenkins, Gilbert

    1998-01-01

    The building of new refining capacity in the Middle East which will operate in the early part of the next century will be the decision of just a few men. They will include the heads of the state petroleum agencies in Iran, Iraq and Saudi Arabia and the CEOs of BP, Exxon and Shell. They will not want for advice from their corporate planners and external consultants, but the key decisions will be in the hands of just a few people. There is nothing new in this decision-making process. The oil consuming countries will react in a similar way to their common environment. In a paper such as this, it is possible to examine the present environment and to extrapolate that environment into the next decade. This is what planners and forecasters are doing everywhere in the petroleum industry. (author)

  8. India's petroleum privatization gathering speed

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    Privatization of India's petroleum industry is seen as inevitable, even by the staunchest supporters of the state owned sector there. What has become clear is that the huge investments required for Indian exploration, refining, and marketing are beyond the scope of even the biggest state owned firms, such as Oil and Natural Gas Commission (ONGC) and Indian Oil Corp. (IOC). A proposal was put forth last fall to offer Bombay High offshore oil fields to leading multinationals for redevelopment to stem the production slide in India's mainstay producing area. Some of those projects could entail capital outlays of as much as $1 billion. In another step to attract foreign investment to the petroleum sector, India last month decided to take steps for phased decontrol of domestic crude oil prices to bring them in line with world market levels and help set the stage for privatization of ONGC. The paper describes major projects, the slide in oil production, price changes, the need for privatization, and the lukewarm interest in exploration

  9. Bernard Pons wants to make the petroleum harbour dues reduced

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    The petroleum activity of the Bordeaux and Nantes-Saint-Nazaire autonomous harbors shows a slight decay in 1996 while the overall trading shows a slight increase. The development of the freight trading is encouraged by attractive tariffs partially financed by the over-charging of the hydrocarbons and crude oil. This situation has penalized the French refining activities. Short paper. (J.S.)

  10. Petroleum Refineries for South Louisiana, UTM Zone 15N NAD83, Louisiana Recovery Authority (2007) [petro_refineries_2000

    Data.gov (United States)

    Louisiana Geographic Information Center — This is a data set of point emission sources of volatiles from operations that have Standard Industrial Classification (SIC) code 2911, Petroleum Refining....

  11. Toxicity of vapor phase petroleum contaminants to microbial degrader communities

    International Nuclear Information System (INIS)

    Long, S.C.; Davey, C.A.

    1994-01-01

    Petroleum products constitute the largest quantity of synthetic organic chemical products produced in the US. They are comprised of mostly hydrocarbon constituents from many different chemical classes including alkenes, cycloalkanes, aromatic compounds, and polyaromatic hydrocarbons. Many petroleum constituents are classified as volatile organic compounds or VOCs. Petroleum products also constitute a major portion of environmental pollution. One emerging technology, with promise for applications to VOCs in subsurface soil environments, is bioventing coupled with soil vapor extraction. These technologies involve volatilization of contaminants into the soil gas phase by injection and withdrawal of air. This air movement causes enhancement of the aerobic microbial degradation of the mobilized vapors by the indigenous populations. This study investigated the effects of exposure of mixed, subsurface microbial communities to vapor phase petroleum constituents or vapors of petroleum mixtures. Soil slurries were prepared and plated onto mineral salts agar plates and exposed to vapor phase contaminants at equilibrium with pure product. Representative n-alkane, branched alkane, cycloalkane, and aromatic compounds were tested as well as petroleum product mixtures. Vapor exposure altered the numbers and morphologies of the colonies enumerated when compared to controls. However, even at high, equilibrium vapor concentrations, microbial degrader populations were not completely inhibited

  12. Price Relationships in the Petroleum Market: An Analysis of Crude Oil and Refined Product Prices

    International Nuclear Information System (INIS)

    Asche, Frank; Gjoelberg, Ole; Voelker, Teresa

    2001-08-01

    In this paper the relationships between crude oil and refined product prices are investigated in a multivariate framework. This allows us to test several (partly competing) assumptions of earlier studies. In particular, we find that the crude oil price is weakly exogenous and that the spread is constant in some but not all relationships. Moreover, the multivariate analysis shows that the link between crude oil prices and several refined product prices implies market integration for these refined products. This is an example of supply driven market integration and producers will change the output mix in response to price changes. (author)

  13. Price relationships in the petroleum market. An analysis of crude oil and refined product prices

    International Nuclear Information System (INIS)

    Asche, Frank; Gjoelberg, Ole; Volker, Teresa

    2003-01-01

    In this paper the relationships between crude oil and refined product prices are investigated in a multivariate framework. This allows us to test several (partly competing) assumptions of earlier studies. In particular, we find that the crude oil price is weakly exogenous and that the spread is constant in some but not all relationships. Moreover, the multivariate analysis shows that the link between crude oil prices and several refined product prices implies market integration for these refined products. This is an example of supply driven market integration and producers will change the output mix in response to price changes

  14. Price relationships in the petroleum market: an analysis of crude oil and refined product prices

    International Nuclear Information System (INIS)

    Asche, F.; Gjoelberg, O.; Voelker, T.

    2003-01-01

    In this paper the relationships between crude oil and refined product prices are investigated in a multivariate framework. This allows us to test several (partly competing) assumptions of earlier studies. In particular, we find that the crude oil price is weakly exogenous and that the spread is constant in some but not all relationships. Moreover, the multivariate analysis shows that the link between crude oil prices and several refined product prices implies market integration for these refined products. This is an example of supply driven market integration and producers will change the output mix in response to price changes. (author)

  15. Application of the Salmonella mutagenicity assay and determination of polycyclic aromatic hydrocarbons in workplaces exposed to petroleum pitch and petroleum coke

    Energy Technology Data Exchange (ETDEWEB)

    Monarca, S; Pasquini, R; Sforzolini, G S; Viola, V; Fagioli, F

    1982-02-01

    Workplaces of an Italian carbon electrode factory, exposed to petroleum pitch and petroleum coke, were studied using a coupled chemical and biological approach to evaluate occupational mutagenic/carcinogenic hazards. Analytical procedures for the determination of polycyclic aromatic hydrocarbons (PAH) and Salmonella/microsome mutagenicity tests were performed on both industrial ingredients and airborne particulate matter of the working environment, after fractionating by sequential Soxhlet extractions with four organic solvents of increasing polarity. The results showed: the presence of extraordinarily high PAH contents in the benzene extracts of petroleum pitch and of airborne particulate samples, in correlation with very high indirect (after metabolic activation) mutagenic responses of benzene extracts with strain TA98; very high indirect mutagenic responses in the other extracts of the airborne particulate samples; the production during the processing at high temperatures of directly acting mutaggens which were absent in the starting materials and their release in the air of workplaces. The comparison of chemical analytical and mutagenicity data has proved to be an interesting approach for better defining the relative health hazards due to occupational exposure to potentially mutagenic/carcinogenic petroleum products.

  16. Petroleum contamination impact on macrobenthic communities under the influence of an oil refinery: Integrating chemical and biological multivariate data

    Science.gov (United States)

    Venturini, Natalia; Muniz, Pablo; Bícego, Márcia C.; Martins, César C.; Tommasi, Luiz Roberto

    2008-07-01

    Petroleum contamination impact on macrobenthic communities in the northeast portion of Todos os Santos Bay was assessed combining in multivariate analyses, chemical parameters such as aliphatic and polycyclic aromatic hydrocarbon indices and concentration ratios with benthic ecological parameters. Sediment samples were taken in August 2000 with a 0.05 m 2 van Veen grab at 28 sampling locations. The predominance of n-alkanes with more than 24 carbons, together with CPI values close to one, and the fact that most of the stations showed UCM/resolved aliphatic hydrocarbons ratios (UCM:R) higher than two, indicated a high degree of anthropogenic contribution, the presence of terrestrial plant detritus, petroleum products and evidence of chronic oil pollution. The indices used to determine the origin of PAH indicated the occurrence of a petrogenic contribution. A pyrolytic contribution constituted mainly by fossil fuel combustion derived PAH was also observed. The results of the stepwise multiple regression analysis performed with chemical data and benthic ecological descriptors demonstrated that not only total PAH concentrations but also specific concentration ratios or indices such as ≥C24:petroleum related variables seemed to have a main influence on macrofauna community structure. The PCA ordination performed with the chemical data resulted in the formation of three groups of stations. The decrease in macrofauna density, number of species and diversity from groups III to I seemed to be related to the occurrence of high aliphatic hydrocarbon and PAH concentrations associated with fine sediments. Our results showed that macrobenthic communities in the northeast portion of Todos os Santos Bay are subjected to the impact of chronic oil pollution as was reflected by the reduction in the number of species and diversity. These results emphasise the importance to combine in multivariate approaches not only total hydrocarbon concentrations but also indices, isomer pair

  17. A refined approach: Saudi Arabia moves beyond crude

    International Nuclear Information System (INIS)

    Krane, Jim

    2015-01-01

    Saudi Arabia's role in global energy markets is changing. The kingdom is reshaping itself as a supplier of refined petroleum products while moving beyond its long-held role as a simple exporter of crude oil. This change is commensurate with the typical development trajectory of a state progressing to a more advanced stage of global economic integration. Gains from increased refining include reducing fuel imports and capturing margins now bequeathed to competitors. Refining also allows the kingdom to export its heavy crude oil to a wider array of customers, beyond select importers configured to handle heavy crudes. However, the move also presents strategic complications. The world's 'swing supplier' of oil may grow less willing or able to adjust supply to suit market demands. In the process, Saudi Arabia may have to update the old “oil for security” relationship that links it with Washington, augmenting it with a more diverse set of economic and investment ties with individual companies and countries, including China. -- Highlights: •Saudi Arabia is diverting crude oil into an expanding refining sector. •In doing so, the kingdom is moving beyond its role as global “swing supplier” of crude oil. •The kingdom will benefit from increased refining, including enhanced demand for heavy crude. •Strategic complications may force it to seek security partners beyond Washington

  18. The future of refining industry is in Asia

    International Nuclear Information System (INIS)

    Dupin, L.

    2010-01-01

    The decision of Total Group to close down the refining activity of its Flandres' site at Dunkerque (France) is a testimony of the deep restructuring that is affecting this sector. The migration of the refining activity towards Middle-East and Asia has started several years ago. The World capacities are increasing: in 2009 4.36 billion tons of petroleum products were refined in the world, representing a 1.9% rise with respect to 2008. 661 refineries exist in the world, among which 6 were inaugurated in 2009, 115 are located in Europe and 12 in France. The bad health of the European refining activity is beneficial to Middle and Asia where investments in new production capacities follow on from one another. From now to 2030, these areas will benefit from 70% of the worldwide investments compared to 11% only for Europe and North America. The decline of the European refining industry is directly linked to decay of the automotive fuel consumption and to the increase of the diesel fuel share with respect to gasoline. On the other hand, Asia, and in particular China and India, follow the exactly opposite trend thanks to their population and economic growths. Therefore, European oil companies try to invest in Asia and are looking for new production capacities in China and India. (J.S.)

  19. Carcinogenic effect of petroleum and its by-products

    Energy Technology Data Exchange (ETDEWEB)

    Gimadeev, M M

    1962-01-01

    A review of literature on the carcinogenic effect of petroleum and its by-products are briefly discussed. Many of the products can induce hyperkeratosis, folliculitis, verruca, pulmonary adenoma, skin cancer, etc. Their action is mainly local but they can also be multicentric. Although a number of groups have made chemical analyses of various petroleums and peroleum products, results were generally negative with respect to 3,4-benzypyrene, although 40 to 68 microg/g was found in 1 crude petroleum. At present it appears that much of the carcinogenic action of these materials resides in polycyclic hydrocarbons about which little is known.

  20. Canadian petroleum industry: 1988 monitoring report. First six months

    International Nuclear Information System (INIS)

    1988-01-01

    The Petroleum Monitoring Agency was established in 1980 to provide the federal government with comprehensive and objective information on and analysis of the financial performance of the petroleum industry in Canada. The Agency publishes a semi-annual and an annual report based on information received directly from all but the smallest oil and gas companies. Data published are mainly aggregate data derived from survey schedules prescribed by regulations. This report presents a summary and highlights of the activities of the first half of 1988. Information is presented on corporate mergers and acquisitions; financial performance by sector (upstream, downstream, foreign) and total operations as seen by net income and cash flow; sources and uses of funds; a comparative performance by the petroleum and other industries as seen by net income and capital expenditures; ownership and control trends; international flows of funds; capital structures; and data related to income taxes. New features added in this report include expansion of the table representing the financial performance and profit margins of the refining/marketing segment to incorporate net income as a component of the analysis; analysis of the industry's use of exploration and investment tax credits; and a chart showing Canadian crude oil acquisition costs vs petroleum product prices. 12 figs., 63 tabs

  1. The influence of petroleum products on the methane fermentation process.

    Science.gov (United States)

    Choromański, Paweł; Karwowska, Ewa; Łebkowska, Maria

    2016-01-15

    In this study the influence of the petroleum products: diesel fuel and spent engine oil on the sewage sludge digestion process and biogas production efficiency was investigated. Microbiological, chemical and enzymatic analyses were applied in the survey. It was revealed that the influence of the petroleum derivatives on the effectiveness of the methane fermentation of sewage sludge depends on the type of the petroleum product. Diesel fuel did not limit the biogas production and the methane concentration in the biogas, while spent engine oil significantly reduced the process efficacy. The changes in physical-chemical parameters, excluding COD, did not reflect the effect of the tested substances. The negative influence of petroleum products on individual bacterial groups was observed after 7 days of the process, while after 14 days probably some adaptive mechanisms appeared. The dehydrogenase activity assessment was the most relevant parameter to evaluate the effect of petroleum products contamination. Diesel fuel was probably used as a source of carbon and energy in the process, while the toxic influence was observed in case of spent engine oil. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Challenges of the refining and bio-refining integration: a future view; O desafio da integracao refino-bio-refino: uma visao do futuro

    Energy Technology Data Exchange (ETDEWEB)

    Baptista, Claudia Alvarenga; Oliveira, Sandra Lima de [PETROBRAS S. A., Rio de de Janeiro, RJ (Brazil); Silva, Suely Coutinho da [Hope Consultoria Ltda., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    As the world economy growths, it is expected an increase in the fuels demand. In the other hand, there is a public denounce against the harmful of gas emissions from the mineral fuels, especial the emission of greenhouse gases. Based on this scenario, there is a growing search for renewable fuels as an alternative for the present world energetic matrix. Therefore the biofuel has conquered more and more participation in the economy as a clean grow-your-own fuel. It is not only a renewable fuel but also a way to reduces Co2 emission. The use of this kind of fuel can bring environmental, social and economic advantages. So, a feasible proposal for the near future could be the performance of a binomial and dynamic model that takes place in the integration between biorefining and conventional refining. Biorefining is similar in concept to the petroleum refining industry, except that renewable biomass materials or vegetable oil are the feedstocks rather than crude oil. An important incentive to the integration of these two concepts is the alternative to process the majority of the conventional refining residue or by products in the biorefining. It is possible to produce high quality low emission fuel from co-conversion of biomass and petroleum residue. There are important processes that can be used to carry out this object, such as gasification coupled with Fischer-Tropsch. Besides the production of PREMIUM quality fuel, the energy and the hydrogen obtained in the gasification process can be used in the conventional refining. Biomass can also be turned into alcohol fuel by enzymatic hydrolysis and can be mixed in the refinery gasoline pool for emissions reduction. Another possibility is to process vegetable oil together with middle distillate in the conventional hydrotreating unity. Although the optimized integration involves technical and economic challenges, it is known that this is an important opportunity to mitigate the environmental problems and to allow the world

  3. Price and inventory dynamics in petroleum product markets

    International Nuclear Information System (INIS)

    Considine, T.J.; Heo, Eunnyeong

    2000-01-01

    Unlike many studies of commodity inventory behavior, this paper estimates a model with endogenous spot and forward prices, inventories, production, and net imports. Our application involves markets for refined petroleum products in the United States. Our model is built around the supply and demand for storage. We estimate the model using Generalized Method of Moments and perform dynamic, simultaneous simulations to estimate the impacts of supply and demand shocks. Supply curves for the industry are inelastic and upward sloping. High inventory levels depress prices. Inventories fall in response to higher sales, consistent with production smoothing. Under higher input prices, refiners reduce their stocks of crude oil but increase their product inventories, consistent with cost smoothing. In some cases, imports of products are more variable than production or inventories. 25 refs

  4. Petroleum product refining: plant level analysis of costs and competitiveness. Implications of greenhouse gas emission reductions. Vol 1

    International Nuclear Information System (INIS)

    Kelly, S.J.; Crandall, G.R.; Houlton, G.A.; Kromm, R.B.

    1999-01-01

    Implications on the Canadian refining industry of reducing greenhouse gas (GHG) emissions to meet Canada's Kyoto commitment are assessed, based on a plant-level analysis of costs, benefits and economic and competitive impacts. It was determined on the basis of demand estimates prepared by Natural Resources Canada that refining industry carbon dioxide emissions could be as much a 38 per cent higher than 1990 levels in 2010. Achieving a six per cent reduction below 1990 levels from this business-as-usual case is considered a very difficult target to achieve, unless refinery shutdowns occur. This would require higher imports to meet Canada's petroleum products demand, leaving total carbon dioxide emissions virtually unchanged. A range of options, classified as (1) low capital, operating efficiency projects, (2) medium capital, process/utility optimization projects, (3) high capital, refinery specific projects, and (4) high operating cost GHG projects, were evaluated. Of these four alternatives, the low capital or operating efficiency projects were the only ones judged to have the potential to be economically viable. Energy efficiency projects in these four groups were evaluated under several policy initiatives including accelerated depreciation and a $200 per tonne of carbon tax. Result showed that an accelerated depreciation policy would lower the hurdle rate for refinery investments, and could achieve a four per cent reduction in GHG emissions below 1990 levels, assuming no further shutdown of refinery capacity. The carbon tax was judged to be potentially damaging to the Canadian refinery industry since it would penalize cracking refineries (most Canadian refineries are of this type); it would provide further uncertainty and risk, such that industry might not be able to justify investments to reduce emissions. The overall assessment is that the Canadian refinery industry could not meet the pro-rata Kyoto GHG reduction target through implementation of economically

  5. The evaporation of crude oil and petroleum products

    International Nuclear Information System (INIS)

    Fingas, M. F.

    1996-01-01

    The physics of oil and petroleum evaporation was studied by means of an experimental apparatus. The evaporation was determined by weight loss and recorded on a computer. Examination of the data showed that most oil and petroleum products (those with seven to ten components) evaporate at a logarithmic rate with respect to time, while other petroleum products (those with fewer chemical components) evaporate at a rate which is square root with respect to time. Evaporation of oil and petroleum was not strictly boundary-layer regulated because the typical oil evaporation rate rates do not exceed that of molecular diffusion and thus turbulent diffusion does not increase the evaporation rates. Overall, boundary layer regulation can be ignored in the prediction of oil and petroleum evaporation. The simple equation relating only the logarithm of time (or the square root of time in the case of narrow-cut products) and temperature are sufficient to accurately describe oil evaporation. refs., figs

  6. Identifying the source of petroleum pollution in sediment cores of southwest of the Caspian Sea using chemical fingerprinting of aliphatic and alicyclic hydrocarbons.

    Science.gov (United States)

    Shirneshan, Golshan; Bakhtiari, Alireza Riyahi; Memariani, Mahmoud

    2017-02-15

    In this study, the concentration and sources of aliphatic and petroleum markers were investigated in 105 samples of Anzali, Rezvanshahr and Astara cores from the southwest of Caspian Sea. Petroleum importation was diagnosed as a main source in most depths of cores by the results of unresolved complex mixture, carbon preference index and hopanes and steranes. From the chemical diagnostic parameters, petroleum inputs in sediment of cores were determined to be different during years and the sources of hydrocarbons in some sections differed than Anzali and Turkmenistan and Azerbaijan oils. Diagenic ratios in most sediments of upper and middle sections in Astara core were determined to be highly similar to those of Azerbaijan oil, while the presence of Turkmenistan and Anzali oils were detected in a few sections of Anzali and Rezvanshahr cores and only five layers of downer section in Anzali core, respectively. Copyright © 2016. Published by Elsevier Ltd.

  7. The potential impact of proposed hazardous air pollutant legislation on the US refining industry

    International Nuclear Information System (INIS)

    1989-11-01

    The Administration has recently submitted a Clean Air Act Bill to Congress which would significantly modify the regulatory treatment of industrial hazardous air pollutants (air toxics). The adverse economic impacts of this legislation on the petroleum refining industry could be substantial. Depending on how EPA interprets the legislative language, the capital costs of compliance for the proposed bill could range from $1.3 to $15.0 billion. At the upper end of the range, costs of this order of magnitude would be over 2.5 times larger than the combined estimated cost of EPAs gasoline volatility (RVP) regulations and the proposed diesel sulfur content regulations. Potential compliance costs could be as much as $0.40 per barrel processed for large, complex refineries and as much as $0.50 per barrel for some small, simple refineries. For perspective, total refining costs, including a normal return on investment, are $4--5 per barrel. Because foreign refineries supplying the US will not be affected by the US air toxics regulations, US refineries may not be able to raise prices sufficiently to recover their compliance costs. For this reason, the air toxic legislation may put US refineries at an economic disadvantage relative to foreign competitors. Even under the best petroleum product market conditions, costs of $0.40 to $0.50 per barrel processed could reduce US Gulf refiner cash operating margins by as much as 29 percent. Under less favorable market conditions, such as the mid-80's when refiners were losing money, the hazardous air pollutant regulations could greatly increase US refiner operating losses and potentially lead to closure of some marginal refineries

  8. Optimization of control parameters for petroleum waste composting

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Composting is being widely employed in the treatment of petroleum waste. The purpose of this study was to find the optimum control parameters for petroleum waste in-vessel composting. Various physical and chemical parameters were monitored to evaluate their influence on the microbial communities present in composting. The CO2 evolution and the number of microorganisms were measured as theactivity of composting. The results demonstrated that the optimum temperature, pH and moisture content were 56.5-59.5, 7.0-8.5 and 55%-60%, respectively. Under the optimum conditions, the removal efficiency of petroleum hydrocarbon reached 83.29% after 30 days composting.

  9. [Recent advances in analysis of petroleum geological samples by comprehensive two-dimensional gas chromatography].

    Science.gov (United States)

    Gao, Xuanbo; Chang, Zhenyang; Dai, Wei; Tong, Ting; Zhang, Wanfeng; He, Sheng; Zhu, Shukui

    2014-10-01

    Abundant geochemical information can be acquired by analyzing the chemical compositions of petroleum geological samples. The information obtained from the analysis provides scientifical evidences for petroleum exploration. However, these samples are complicated and can be easily influenced by physical (e. g. evaporation, emulsification, natural dispersion, dissolution and sorption), chemical (photodegradation) and biological (mainly microbial degradation) weathering processes. Therefore, it is very difficult to analyze the petroleum geological samples and they cannot be effectively separated by traditional gas chromatography/mass spectrometry. A newly developed separation technique, comprehensive two-dimensional gas chromatography (GC x GC), has unique advantages in complex sample analysis, and recently it has been applied to petroleum geological samples. This article mainly reviews the research progres- ses in the last five years, the main problems and the future research about GC x GC applied in the area of petroleum geology.

  10. Application of the salmonella mutagenicity assay and determination of polycyclic aromatic hydrocarbons in workplaces exposed to petroleum pitch and petroleum coke

    Energy Technology Data Exchange (ETDEWEB)

    Monarca, S; Pasquini, R; Sforzolini, G S; Fagioli, F; Viola, V

    1982-02-01

    Workplaces of an Italian carbon electrode factory, exposed to petroleum pitch and petroleum coke, were studied using a coupled chemical and biological approach to evaluate occupational mutagenic/carcinogenic hazards. Analytical procedures for the determination of polycyclic aromatic hydrocarbons (PAH) and Salmonella/microsome mutagenicity tests were performed on pitch and coke and airborne particulate matter of the working environment, after fractionating by sequential Soxhlet extractions with four organic solvents of increasing polarity (benzene, chloroform, methanol and acetone). The results showed: (a) the presence of extraordinarily high PAH (carcinogenic and noncarcinogenic) contents in the benzene extracts of petroleum pitch (3.6 wt% of total PAH) and of airborne particulate samples (up to 0.35 wt% of total PAH), in correlation with very high indirect mutagenic responses of benzene extracts; (b) very high indirect mutagenic responses in the other extracts of the airborne particulate samples; (c) the production during the processing at high temperatures of directly acting mutagens which were absent in the starting materials and their release in the air of workplaces. The comparison of chemical analytical and mutagenicity data has proved to be an interesting approach for better defining the relative health hazards due to occupational exposure to potentially mutagenic/carcinogenic petroleum products.

  11. Preparative separation of C19-diterpenoid alkaloids from Aconitum carmichaelii Debx by pH‑zone-refining counter-current chromatography

    Directory of Open Access Journals (Sweden)

    Dahui Liu

    2013-01-01

    Full Text Available The technique of pH-zone-refining counter-current chromatography was successfully applied to preparatively separate three C19-diterpenoid alkaloids from the crude extracts of Aconitum carmichaelii for the first time using a two-phase solvent system of petroleum ether-ethyl acetate-methanol-water (5:5:1:9, v/v/v/v. Mesaconitine (I, hypaconitine (II, and deoxyaconitine (III were obtained from 2.5 g of the crude alkaloids in a one-step separation; the yields were 4.16%, 16.96%, and 5.05%, respectively. The purities of compounds I, II, and III were 93.0%, 95%, and 96%, respectively, as determined by HPLC. The chemical structures of the three compounds were identified by electrospray ionization mass spectrometry (ESI-MS and NMR.

  12. Use of chemically synthesized ZnO thin film as a liquefied petroleum gas sensor

    International Nuclear Information System (INIS)

    Shinde, V.R.; Gujar, T.P.; Lokhande, C.D.; Mane, R.S.; Han, Sung-Hwan

    2007-01-01

    Liquefied petroleum gas (LPG) sensing properties of ZnO thin films consisting of sub-micron rods synthesized by chemical bath deposition (CBD) method are presented in depth. The scanning electron microscopy observation reveals that ZnO sub-micron rods are of hexagonal in phase grown perpendicular to the substrate surface. Due to large surface area, the ZnO thin films of sub-micron rods were sensitive to the explosive LPG, which was studied for different time depositions and for different operating temperatures. The maximum response of 28% at 673 K was recorded under the exposure of 10% of lower explosive level (LEL) of LPG. The ZnO thin films of sub-micron rods exhibited good sensitivity and rapid response-recovery characteristics towards LPG

  13. Zeolites as Catalysts for Fuels Refining after Indirect Liquefaction Processes

    Directory of Open Access Journals (Sweden)

    Arno de Klerk

    2018-01-01

    Full Text Available The use of zeolite catalysts for the refining of products from methanol synthesis and Fisher–Tropsch synthesis was reviewed. The focus was on fuels refining processes and differences in the application to indirect liquefaction products was compared to petroleum, which is often a case of managing different molecules. Processes covered were skeletal isomerisation of n-butenes, hydroisomerisation of n-butane, aliphatic alkylation, alkene oligomerisation, methanol to hydrocarbons, ethanol and heavier alcohols to hydrocarbons, carbonyls to hydrocarbons, etherification of alkenes with alcohols, light naphtha hydroisomerisation, catalytic naphtha reforming, hydroisomerisation of distillate, hydrocracking and fluid catalytic cracking. The zeolite types that are already industrially used were pointed out, as well as zeolite types that have future promise for specific conversion processes.

  14. Petroleum Characterisation and Reservoir Dynamics - The Froey Field and the Rind Discovery, Norwegian Continental Shelf

    Energy Technology Data Exchange (ETDEWEB)

    Bhullar, Abid G.

    1999-07-01

    The objective of this thesis is to apply the fundamental principles of petroleum geochemistry integrated with petroleum/reservoir engineering and geological concepts to the dynamics and characterisation of petroleum reservoirs. The study is based on 600 core samples and 9 DST oils from 11 wells in the Froey Field and the Rind Discovery. The work is presented in five papers. Paper 1 is a detailed characterisation of the reservoirs using a petroleum geochemical approach. Paper 2 describes the application of a single reservoir geochemical screening technique to exploration, appraisal and production geology and reservoir/petroleum engineering. Paper 3 compares the Iatroscan TLC-FID screening technique and the extraction efficiency of micro-extraction used in this work with the well-established Rock-Eval geochemical screening method and with the Soxtec extraction method. Paper 4 refines the migration and filling models of Paper 1, and Paper 5 presents a comparison of models of petroleum generation, migration and accumulation based on geochemical data with 1D burial history, a ''pseudo well'' based on actual well data and regional seismic analysis representing the hydrocarbon generative basin conditions.

  15. Orbital compressed air and petroleum injury mimicking necrotizing fasciitis.

    Science.gov (United States)

    Mellington, Faye E; Bacon, Annette S; Abu-Bakra, Mohammed A J; Martinez-Devesa, Pablo; Norris, Jonathan H

    2014-09-01

    Orbital injury secondary to petroleum-based products is rare. We report the first case, to our knowledge, of a combined compressed air and chemical orbital injury, which mimicked necrotizing fasciitis. A 58-year-old man was repairing his motorcycle engine when a piston inadvertently fired, discharging compressed air and petroleum-based carburetor cleaner into his left eye. He developed surgical emphysema, skin necrosis, and a chemical cellulitis, causing an orbital compartment syndrome. He was treated initially with antibiotics and subsequently with intravenous steroid and orbital decompression surgery. There was almost complete recovery by 4 weeks postsurgery. WHY SHOULD AN EMERGENCY PHYSICIAN BE AWARE OF THIS?: Petroleum-based products can cause severe skin irritation and necrosis. Compressed air injury can cause surgical emphysema. When these two mechanisms of injury are combined, the resulting orbitopathy and skin necrosis can mimic necrotizing fasciitis and cause diagnostic confusion. A favorable outcome is achievable with aggressive timely management. Copyright © 2014 Elsevier Inc. All rights reserved.

  16. The harm of petroleum-polluted soil and its remediation research

    Science.gov (United States)

    Wang, Shuguang; Xu, Yan; Lin, Zhaofeng; Zhang, Jishi; Norbu, Namkha; Liu, Wei

    2017-08-01

    Land resources are the foundation of human's survival and development, and it's one of the most valuable natural resources of each country. In view of the serious problems of petroleum pollution to soil caused during the exploration and development processes, this article based on a large number of literature researches, firstly discussed the compositions and properties of petroleum contaminants, secondly investigated some restoration methods for the current situation of petroleum polluted soil, compared and analyzed the advantages and disadvantages of three kinds of bioremediation technologies. Finally, according to the deficiencies of previous research and existing problems, made an outlook of the physical and chemical remediation, bioremediation, and microbe-plant remediation, to provide some enlightenments for petroleum-contaminated soil remediation.

  17. Methods for differentiating identity and sources of mixed petroleum pollutants in the environment

    International Nuclear Information System (INIS)

    Kaplan, I.R.; Alimi, H.; Lee, R.P.

    1993-01-01

    When crude or refined oil products enter the environment they begin to degrade by numerous microbiological or physical processes. The result of such changes is to alter the molecular composition of the product so that its source is unrecognizable by application of conventional EPA-type methodology. Numerous methods have been devised in the petroleum exploration industry to characterize source rock bitumens and reservoir hydrocarbons. A modification of these methods has been successfully applied at the authors company to identify the source of the fugitive hydrocarbons. For mildly altered products a statistical comparison is made using pattern recognition of the n-alkane distribution between C 10 -C 35 for heavy products and C 3 -C 10 for the gasoline range products. For highly altered products, a search is made for complex organic molecules that have undergone the least alteration, which include long chain polynuclear aromatic hydrocarbons and the polycyclic paraffinic hydrocarbons. These biomarker compounds have many isomeric forms which help characterize their sources. Elemental composition; especially sulfur, vanadium and nickel, and other transition and base metals help differentiate crude oil from refined products. Lead alkyls and MTBE are especially useful in determining residence time of gasoline products in soil and ground water. Petroporphyrin characterization can help differentiate crude oil from heavy refined oils or fluids. Stable isotope ratios are particularly useful for differentiating sources of highly altered petroleum products

  18. A study of the effects of enhanced oil recovery agents on the quality of Strategic Petroleum Reserves crude oil. [Physical and chemical interactions of Enhanced Oil Recovery reagents with hydrocarbons present in petroleum

    Energy Technology Data Exchange (ETDEWEB)

    Kabadi, V.N.

    1992-10-01

    The project was initiated on September 1, 1990. The objective of the project was to carry out a literature search to estimate the types and extents of long time interactions of enhanced oil recovery (EOR) agents, such as surfactants, caustics and polymers, with crude oil. This information is necessary to make recommendations about mixing EOR crude oil with crude oils from primary and secondary recovery processes in the Strategic Petroleum Reserve (SPR). Data were sought on both adverse and beneficial effects of EOR agents that would impact handling, transportation and refining of crude oil. An extensive literature search has been completed, and the following informations has been compiled: (1) a listing of existing EOR test and field projects; (2) a listing of currently used EOR agents; and (3) evidence of short and long term physical and chemical interactions of these EOR-agents with hydrocarbons, and their effects on the quality of crude oil at long times. This information is presented in this report. Finally some conclusions are derived and recommendations are made. Although the conclusions are based mostly on extrapolations because of lack of specific data, it is recommended that the enhancement of the rates of biodegradation of oil catalyzed by the EOR agents needs to be further studied. There is no evidence of substantial long term effects on crude oil because of other interactions. Some recommendations are also made regarding the types of studies that would be necessary to determine the effect of certain EOR agents on the rates of biodegradation of crude oil.

  19. Fabrication and study of stability of Ca2AlWO5,5 ceramic in crude petroleum for applications in petroleum industry

    International Nuclear Information System (INIS)

    Yadava, Y.P.; Silva, N.D.G.; Sousa, A.G. de; Sanguinetti Ferreira, R.A.

    2010-01-01

    Perovskite-type ceramic oxides or their derivatives are used for applications in high technology because of their enormous range of physic-chemical properties with little change in structural characteristics. In this paper we report manufacture ceramic components of a new ceramic Ca 2 AlWO 5,5 by thermo-mechanical process. Stoichiometric amounts of chemical constituents with high degree of purity, were homogenized using a ball mill and high purity alumina balls, compacted by uniaxial pressing and annealed at 1200 deg C for 48 hours. The structural characterization studied by x-ray diffraction that this material has a typical complex ordered cubic perovskite structure. For the study the stability of these ceramics in crude petroleum circular discs of 20 mm diameter and 2 mm thickness were produced and sintering. These discs were submerged in crude petroleum for 15, 30 and 45 days and were examined at each stage by X-ray diffraction, optical microscopy and hardness testing and these results show that Ca 2 AlWO 5,5 are stable in crude petroleum environment. (author)

  20. Preparative separation of C{sub 19}-diterpenoid alkaloids from Aconitum carmichaelii Debx by pH zone-refining counter-current chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Dahui [Institute of Medicinal Plants, Yunnan Academy of Agricultural Sciences, Kunming (China); Shu, Xikai; Wang, Xiao; Fang, Lei; Huang, Luqi, E-mail: wxjn1998@126.com [Shandong Analysis and Test Center, Shandong Academy of Sciences, Jinan, Shandong (China); Xi, Xingjun; Zheng, Zhenjia [China National institute of Standardization, Beijing (China)

    2013-11-01

    The technique of pH-zone-refining counter-current chromatography was successfully applied to preparatively separate three C{sub 19}-diterpenoid alkaloids from the crude extracts of Aconitum carmichaelii for the first time using a two-phase solvent system of petroleum ether-ethyl acetate-methanol-water (5:5:1:9, v/v/v/v). Mesaconitine (I), hypaconitine (II), and deoxyaconitine (III) were obtained from 2.5 g of the crude alkaloids in a one-step separation; the yields were 4.16%, 16.96%, and 5.05%, respectively. The purities of compounds I, II, and III were 93.0%, 95%, and 96%, respectively, as determined by HPLC. The chemical structures of the three compounds were identified by electrospray ionization mass spectrometry (ESI-MS) and NMR. (author)

  1. Iran's petroleum policy: Current trends and the future outlook

    International Nuclear Information System (INIS)

    Pezeshki, S.; Fesharaki, F.

    1994-12-01

    The Iranian economy and political situation have undergone radical changes since the 1979 Islamic revolution. The excesses of the early years of the revolution have gradually given way to moderation and a more pragmatic economic policy--based on the principles of the free market. The petroleum policy, as a subset of the economic policies, has been somewhat affected by the political and economic developments in Iran. The petroleum policy has changed from a position of no foreign participation to a position that includes a desire for foreign participation, the text of a model contract, and an attempt to introduce new technologies in the upstream sector. This report provides an overview of the key issues facing the Iranian oil industry and the economic context in which the oil industry is operating in Iran. It describes the evolution of policies meant to move the oil industry toward the free market; it discusses Iran's oil trading partners, the outlook for refining and project investments, and current and likely future developments in the natural gas and petrochemical sectors. In short, the report provides an up-to-date assessment of the Iranian petroleum sector and its likely evolution in the future

  2. Boom times : Canada's crude petroleum industry : analysis in brief

    International Nuclear Information System (INIS)

    Rowat, M.R.

    2006-01-01

    This document examined the trends in crude oil prices, the production and exports of Canada's crude petroleum industry, and Canada's imports of crude petroleum. As an exporter and importer of crude oil, Canada's petroleum industry is currently experiencing economic prosperity as a result of high oil prices combined with high global demand for oil. This document reviewed industry activity for 2005 and addressed the reasons for the first decline in Canadian crude oil production in 6 years. A quick review of soaring crude oil prices, supply and shortages was also presented. A review of exports revealed that since 1995, the United States has received 99 per cent of Canadian exports. Although production activity is occurring in 7 provinces, the biggest participant is Alberta, followed by Saskatchewan. In 2005, Canada produced 136.4 million cubic metres of crude petroleum, of which two-thirds came from Alberta. Saskatchewan contributed 18 per cent of total Canadian crude oil production, while offshore oil rigs in Newfoundland and Labrador contributed 13 per cent. The vast oil sands resource accounted for 42 per cent of the province's total production. Alberta oil export is piped entirely into the United States. In 2005, even with a slight drop in exports, Canadian oil exporters received $30 billion for their products, up from $25 billion the year before. Canada also supplied nearly 10 per cent of the American crude oil needs. According to the National Energy Board, Canadian refineries are approaching capacity. Canada's 19 refineries, which have a capacity of 320,000 cubic metres per day, operated at 92 per cent of capacity in 2005 to meet the needs of the domestic market. More imported petroleum was refined than Canadian sourced petroleum. In 2005, the gas and oil industry saw historically high profits, taxes paid and investments. 6 refs., 5 figs

  3. Characterization of crude oils and petroleum products: (I Elution liquid chromatographic separation and gas chromatographic analysis of crude oils and petroleum products

    Directory of Open Access Journals (Sweden)

    E.O. Odebunmi

    2002-12-01

    Full Text Available Some physical and chemical properties of samples of light, medium and heavy Nigerian crude oils and petroleum products including gasoline, kerosene and engine oil have been measured and are reported in this paper. The crude oils and petroleum products have also been characterized by fractional distillation and elution liquid chromatography. The fractions obtained from elution liquid chromatography were analyzed using gas chromatography (GC. The GC fractions were identified by comparing the retention time of peaks in the unknown samples with those of components of calibration standard mixtures. The importance of the physico-chemical properties and the significance of the fractional distillation and chromatographic separation methods to industrial process operations have been discussed.

  4. Chemistry of fossil fuels and biofuels (cambridge series in chemical engineering)

    CERN Document Server

    Schobert, Harold

    2013-01-01

    Focusing on today's major fuel resources - ethanol, biodiesel, wood, natural gas, petroleum products and coal - this book discusses the formation, composition and properties of the fuels, and the ways in which they are processed for commercial use. The book examines the origin of fuels through natural processes such as photosynthesis and the geological transformation of ancient plant material; the relationships between their composition, molecular structures, and physical properties; and the various processes by which they are converted or refined into the fuel products appearing on today's market. Fundamental chemical aspects such as catalysis and the behaviour of reactive intermediates are presented, and global warming and anthropogenic carbon dioxide emissions are also discussed. The book is suitable for graduate students in energy engineering, chemical engineering, mechanical engineering and chemistry, as well as professional scientists and engineers.

  5. China expands refining sector to handle booming oil demand

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    China's refining sector is in the midst of a major expansion and reorganization in response to booming domestic demand for petroleum products. Plans call for hiking crude processing capacity to 3.9 million b/d in 1995 from the current 3.085 million b/d. Much of that 26% increase will come where the products demand growth is the strongest: China's coastal provinces, notably those in the southeast. Despite the demand surge, China's refineries operated at only 74% of capacity in 1991, and projections for 1992 weren't much better. Domestic crude supply is limited because of Beijing's insistence on maintaining crude export levels, a major source of hard currency foreign exchange. The paper discusses the superheated demand; exports and imports; the refining infrastructure; the Shenzhen refinery; Hong Kong demand; southeast coast demand; 1993 plans; and foreign investment

  6. Fiscal 1975 Sunshine Project research report. General research on hydrogen energy subsystems and their peripheral technologies (Research on chemical use); 1975 nendo suiso riyo subsystem no sogoteki kento to shuhen gijutsu ni kansuru kenkyu seika hokokusho. Kagaku riyo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1976-04-15

    The whole amount of hydrogen consumption for chemical industries all over the world is estimated to be 249.7 billion Nm{sup 3} in 1974, while 367.2 billion Nm{sup 3} in 1980 roughly under a bold assumption, based on 3 current big consumption fields of ammonia production, methanol production and petroleum refining, and some promising fields in the future such as reduced iron and synthetic protein. Consumption ratios for every field are probably 54.9% in ammonia production, 30% in petroleum refining, 9.5% in methanol production and 5.6% in others in 1974, and nearly similar in 1980. However, although there are various troubles, if a large amount of methanol is used as fuel in the future, and its production plan is promoted to satisfy the demand of methanol fuel, hydrogen consumption for methanol production will increase drastically. In the future, if the production process of hydrogen as secondary fuel is established, such hydrogen also will be used for various chemical industries naturally. Research was thus made on use of oxygen as byproduct inevitably. (NEDO)

  7. Refining and end use study of coal liquids

    International Nuclear Information System (INIS)

    1998-01-01

    Two direct coal liquids were evaluated by linear programming analysis to determine their value as petroleum refinery feedstock. The first liquid, DL1, was produced from bitiuminous coal using the Hydrocarbon Technologies, Inc.(HTI) two-stage hydrogenation process in Proof of Concept Run No.1, POC-1. The second liquid, DL2,was produced from sub-bituminous coal using a three-stage HTI process in Proof of Concept Run No. 2, POC-2; the third stage being a severe hydrogenation process. A linear programming (LP) model was developed which simulates a generic 150,000 barrel per day refinery in the Midwest U.S. Data from upgrading tests conducted on the coal liquids and related petroleum fractions in the pilot plant testing phase of the Refining and End Use Study was inputed into the model. The coal liquids were compared against a generic petroleum crude feedstock. under two scenarios. In the first scenario, it was assumed that the refinery capacity and product slate/volumes were fixed. The coal liquids would be used to replace a portion of the generic crude. The LP results showed that the DL1 material had essentially the same value as the generic crude. Due to its higher quality, the DL2 material had a value of approximately 0.60 $/barrel higher than the petroleum crude. In the second scenario, it was assumed that a market opportunity exists to increase production by one-third. This requires a refinery expansion. The feedstock for this scenario could be either 100% petroleum crude or a combination of petroleum crude and the direct coal liquids. Linear programming analysis showed that the capital cost of the refinery expansion was significantly less when coal liquids are utilized. In addition, the pilot plant testing showed that both of the direct coal liquids demonstrated superior catalytic cracking and naphtha reforming yields. Depending on the coal liquid flow rate, the value of the DL1 material was 2.5-4.0 $/barrel greater than the base petroleum crude, while the DL2

  8. Proposal for refining business rules for petroleum and natural gas tenure in Alberta 1999 : attachment to Mineral Rights Information Bulletin 99-2

    International Nuclear Information System (INIS)

    1999-01-01

    The position taken by Alberta Energy regarding petroleum and natural gas tenure is discussed. In September 1995, the Petroleum and Natural Gas Tenure Review Advisory Committee was established with representation from the Ministry of Energy and five industry associations. Since then, the Committee has published 10 proposals for industry review. The review resulted in the Mines and Minerals Amendment Act 1997, the Petroleum and Natural Gas Tenure Regulation, the Mines and Minerals Administration Regulation and the Crown Minerals Registration Regulation. The Alberta Department of Energy is committed to introducing further changes where necessary. Some of these changes are described in this proposal. They are: (1) changes to the mission of the the Department of Energy, (2) changes to the mission of the Mineral Operations Division, (3) changes to petroleum and natural gas tenure philosophies, (4) petroleum and natural gas licence administration, (5) petroleum and natural gas tenure regulations, (6) off-location wells, (7) continuations based on the Energy and Utilities Board's (EUB) approved projects, (8) changes to offset notices within the EUB approved projects, (9) serving notices on diagonally cornering spacing units, (10) offset compensation, (11) changes to applications where minister disagrees, (12) trespassing, and (13) water injection, water disposal, waster source and observation wells

  9. Kinetic Modeling of a Heterogeneous Fenton Oxidative Treatment of Petroleum Refining Wastewater

    Science.gov (United States)

    Basheer Hasan, Diya'uddeen; Abdul Raman, Abdul Aziz; Wan Daud, Wan Mohd Ashri

    2014-01-01

    The mineralisation kinetics of petroleum refinery effluent (PRE) by Fenton oxidation were evaluated. Within the ambit of the experimental data generated, first-order kinetic model (FKM), generalised lumped kinetic model (GLKM), and generalized kinetic model (GKM) were tested. The obtained apparent kinetic rate constants for the initial oxidation step (k 2′), their final oxidation step (k 1′), and the direct conversion to endproducts step (k 3′) were 10.12, 3.78, and 0.24 min−1 for GKM; 0.98, 0.98, and nil min−1 for GLKM; and nil, nil, and >0.005 min−1 for FKM. The findings showed that GKM is superior in estimating the mineralization kinetics. PMID:24592152

  10. DIREM's prices. Prices and margins of petroleum products in France and in the European Union

    International Nuclear Information System (INIS)

    2002-08-01

    This report presents in a series of graphs and tables the prices and margins of petroleum products in France and in the European Union (EU) according to the data compiled by the Direction of energy and mineral resources (DIREM) of the French general direction of energy and raw materials (DGEMP, Ministry of economy, finances and industry): evolution of crude prices, evolution of Rotterdam's quotation of petroleum products, raw margin of brent refining, French fuel prices (automotive and domestic fuels, evolution, comparison with EU and Rotterdam's prices), comparison with prices in other European countries, evolution of average retail prices in France. (J.S.)

  11. The role of the University of Calgary in the development of a centre of excellence in petroleum technology

    International Nuclear Information System (INIS)

    Moore, G.; Chakma, A.

    1996-01-01

    The role of the University of Calgary's Department of Chemical and Petroleum Engineering in developing a world centre of excellence in petroleum engineering in Calgary, was discussed. Reasons for the failure of previous efforts to establish a Department of Petroleum Engineering at the University were explained. High participation levels in the existing Department of Chemical and Petroleum Reservoir Engineering's water-flooding, and reservoir engineering programs were noted. Support for the development of a centre of excellence in petroleum engineering from government and industry, with specific reference to the the recently instituted, government sponsored, ACCESS program, was described. Problems in maintaining a University Faculty with a wide range of petroleum expertise were noted. Current plans for the development of a Conjoint Centre of Applied Petroleum Technology in conjunction with the Southern Alberta Institute of Technology were described. The joint effort between the two institutions appeared to be the most promising avenue to date to realize the dream of Calgary as a world center of excellence in petroleum engineering, preparing future workers in the petroleum industry at all levels, from technologists to post-doctoral fellows

  12. Optimisation of petroleum refinery water network systems retrofit incorporating reuse, regeneration and recycle strategies

    Energy Technology Data Exchange (ETDEWEB)

    Khor, Cheng Seong; Shah, Nilay [Imperial College London (United Kingdom); Mahadzir, Shuhaimi [Universiti Teknologi Petronas (Malaysia); Elkamel, Ali [University of Waterloo (Canada)

    2012-02-15

    Increasingly strict environmental regulations have given rise to higher requirements for operating efficiency and optimization and water has become a vital resource in the refining process and allied industries. Due to this high demand for water, plants may be exposed to supply interruptions and shortages in the future. Major concerns in the petroleum refining industry are the scarcity of fresh water supply and increasingly rigid rules on wastewater discharge, which have resulted from concerns over the environmental impact. This paper presents the efforts made to develop an optimization framework for design of petroleum refinery water network systems and retrofitting that incorporates reuse, regeneration, and recycling strategies. This framework includes the complementary advantage of water pinch analysis (WPA). Water minimization strategies were incorporated as first postulates in a superstructural representation that includes all feasible flow-sheet options for taking advantage of water reuse, regeneration and recycling opportunities. Additionally, a post-optimization analysis was carried out to evaluate the repeated treatment processes required to identify the most efficient retrofit option.

  13. Biodegradation and chemical characterization of petroleum diesel hydrocarbons in seawater at low temperatures

    OpenAIRE

    Bausch, Alexandre Renee

    2010-01-01

    Master's thesis in Environmental engineering Petroleum hydrocarbons are a major source of marine contamination. Biodegradation, which is fundamental for the natural attenuation of these hydrocarbons in nature, involves mineralization or transformation of organic compounds by autochthonous microorganism communities. Various limiting factors characteristic of the petroleum, the external environment, and the microbial community determine the fate of oil (e.g., diesel) in the marine environmen...

  14. [Chemical constituents from petroleum ether fraction of Swertia chirayita and their activities in vitro].

    Science.gov (United States)

    You, Rong-Rong; Chen, Xue-Qing; He, Dan-Dan; Huang, Chang-Gao; Jin, Yang; Qian, Shi-Hui; Ju, Jian-Ming; Fan, Jun-Ting

    2017-10-01

    The present work is to study the chemical constituents from petroleum ether fraction of Tibetan medicine Swertia chirayita by column chromatography and recrystallization. The structures were identified by physical and chemical properties and spectral data as swerchirin (1), decussatin (2), 1,8-dihydroxy-3,5,7-trimethoxyxanthone (3), 1-hydroxy-3,5,7,8-tetramethoxyxanthone (4), bellidifolin (5), 1-hydroxy-3, 7-dimethoxyxanthone (6), methylswertianin (7), 1-hydroxy-3,5-dimethoxyxanthone (8), erythrodiol (9), oleanolic acid (10), gnetiolactone (11), scopoletin (12), sinapaldehyde (13), syringaldehyde (14), and β-sitosterol (15). Compounds 3, 4, 9, 11-14 were isolated from S. chirayita for the first time. Compounds 9 and 12 were firstly isolated from the genus Swertia. The cytotoxic activities of compounds 1, 2, 5, 7 and 8 against human pancreatic cancer cell lines SW1990 and BxPC-3,and the protective effects of these compounds against hydrogen peroxide (H2O2)-induced oxidative stress in human endothelium-derived EA.hy926 were investigated in vitro. The results showed no obvious effect at the high concentration of 50 μmol•L⁻¹. Copyright© by the Chinese Pharmaceutical Association.

  15. Natural gas in 1942: Petroleum in 1942: Gravimetric and magnetic geophysical surveys in the gas fields of southwestern Ontario, 1941 and 1942. Annual publication

    Energy Technology Data Exchange (ETDEWEB)

    Crozier, A R; Brant, A A

    1946-12-31

    Part V of this annual report consists of three separate reports: Natural gas; petroleum; and gravimetric and magnetic geophysical surveys in the gas fields of southwestern Ontario. The natural gas report discusses production and distribution; changes and improvements; consumption and rates; and gas wells and their production. The petroleum report presents information on production and drilling by township; expansion; and petroleum importation and refining operations. The final report discusses causes of anomalies; a discussion of the gravitational results and a discussion of the magnetic results.

  16. Ozone using outlook for efficiency increasing of transportation and processing of high viscous petroleum raw materials

    International Nuclear Information System (INIS)

    Nadirov, N.K.; Zajkina, R.F.; Mamonova, T.B.

    1997-01-01

    Main types of oxidation reactions preceding during petroleum feedstock ozonization are generalized. The slight ozone high paraffin-content petroleum processing sites in shown on the example will make possible to rise the pipe transport efficiency and to increase the light fraction contents in petroleums. The prospects are discussed to application of ozone forming as a by-product of radiation-chemical facilities action for petroleum feedstock processing. (author)

  17. Preparative Separation of Six Rhynchophylla Alkaloids from Uncaria macrophylla Wall by pH-Zone Refining Counter-Current Chromatography

    OpenAIRE

    Zhang, Qinghai; Lin, Changhu; Duan, Wenjuan; Wang, Xiao; Luo, Aiqin

    2013-01-01

    pH-Zone refining counter-current chromatography was successfully applied to the preparative isolation and purification of six alkaloids from the ethanol extracts of Uncaria macrophylla Wall. Because of the low content of alkaloids (about 0.2%, w/w) in U. macrophylla Wall, the target compounds were enriched by pH-zone refining counter-current chromatography using a two-phase solvent system composed of petroleum ether–ethyl acetate–isopropanol–water (2:6:3:9, v/v), adding 10 mM triethylamine ...

  18. The role of the national petroleum company in petroleum development market

    Energy Technology Data Exchange (ETDEWEB)

    Lee, B J [Korea Energy Economics Institute, Euiwang (Korea, Republic of)

    1997-08-01

    The present century started with the creation of national petroleum companies, and it ends with those national petroleum companies exerting various types of efforts to increase the efficiency of their management. Especially, the efforts of these national petroleum companies are ever intensifying to adapt to new trends in the world petroleum market such as intensified competition, ever-deepening price unstableness, separation of structure between upstream and downstream portions, rapid development of petroleum development technologies, change of political systems and the demise of national borders, ever-increasing consciousness of environmental preservation, etc. Korea cannot be exempt from management rationalization efforts of national petroleum companies. Especially, Korea established its own national petroleum company in order to actively deal with these as its supply system is very weak. Therefore, the national petroleum company should create as many successful petroleum development businesses by actively carrying out petroleum development businesses domestically and overseas in order to establish a stable supply system of petroleum and to support the petroleum development businesses of civilian enterprises more effectively. The national petroleum company must, first of all, replace the bureaucracy with entrepreneurship. Esp., in order to enhance the efficiency of management, short- term outcome should not be emphasized over long-term tenure of petroleum development businesses, and excessive interference of government on the national petroleum company should be excluded. The entrepreneurship of the national petroleum company should be pursued in Positive-sum way, and its public image should be actively promoted through this. 35 refs., 11 figs., 32 tabs.

  19. Prediction of proton chemical shifts in RNA - Their use in structure refinement and validation

    International Nuclear Information System (INIS)

    Cromsigt, Jenny A.M.T.C.; Hilbers, Cees W.; Wijmenga, Sybren S.

    2001-01-01

    An analysis is presented of experimental versus calculated chemical shifts of the non-exchangeable protons for 28 RNA structures deposited in the Protein Data Bank, covering a wide range of structural building blocks. We have used existing models for ring-current and magnetic-anisotropy contributions to calculate the proton chemical shifts from the structures. Two different parameter sets were tried: (i) parameters derived by Ribas-Prado and Giessner-Prettre (GP set) [(1981) J. Mol. Struct.,76, 81-92.]; (ii) parameters derived by Case [(1995) J. Biomol. NMR, 6, 341-346]. Both sets lead to similar results. The detailed analysis was carried using the GP set. The root-mean-square-deviation between the predicted and observed chemical shifts of the complete database is 0.16 ppm with a Pearson correlation coefficient of 0.79. For protons in the usually well-defined A-helix environment these numbers are, 0.08 ppm and 0.96, respectively. As a result of this good correspondence, a reliable analysis could be made of the structural dependencies of the 1 H chemical shifts revealing their physical origin. For example, a down-field shift of either H2' or H3' or both indicates a high-syn/syn χ-angle. In an A-helix it is essentially the 5'-neighbor that affects the chemical shifts of H5, H6 and H8 protons. The H5, H6 and H8 resonances can therefore be assigned in an A-helix on the basis of their observed chemical shifts. In general, the chemical shifts were found to be quite sensitive to structural changes. We therefore propose that a comparison between calculated and observed 1 H chemical shifts is a good tool for validation and refinement of structures derived from NOEs and J-couplings

  20. Refinery production planning and scheduling: the refining core business

    Directory of Open Access Journals (Sweden)

    M. Joly

    2012-06-01

    Full Text Available Intelligent production planning and scheduling are of paramount importance to ensure refinery profitability, logistic reliability and safety at the local and corporate levels. In Brazil, such activities play a particularly critical role, since the Brazilian downstream model is moving towards a demand-driven model rather than a supply-driven one. Moreover, new and specialized non-linear constraints are continuously being incorporated into these large-scale problems: increases in oil prices implying the need for processing poor quality crudes, increasing demand and new demand patterns for petroleum products, new stringent environmental regulations related to clean fuels and start-up of new production technologies embedded into more complex refining schemes. This paper aims at clarifying the central role of refinery planning and scheduling activities in the Petrobras refining business. Major past and present results are outlined and corporate long-term strategies to deal with present and future challenges are presented.

  1. Iran`s petroleum policy: Current trends and the future outlook

    Energy Technology Data Exchange (ETDEWEB)

    Pezeshki, S.; Fesharaki, F.

    1994-12-01

    The Iranian economy and political situation have undergone radical changes since the 1979 Islamic revolution. The excesses of the early years of the revolution have gradually given way to moderation and a more pragmatic economic policy--based on the principles of the free market. The petroleum policy, as a subset of the economic policies, has been somewhat affected by the political and economic developments in Iran. The petroleum policy has changed from a position of no foreign participation to a position that includes a desire for foreign participation, the text of a model contract, and an attempt to introduce new technologies in the upstream sector. This report provides an overview of the key issues facing the Iranian oil industry and the economic context in which the oil industry is operating in Iran. It describes the evolution of policies meant to move the oil industry toward the free market; it discusses Iran`s oil trading partners, the outlook for refining and project investments, and current and likely future developments in the natural gas and petrochemical sectors. In short, the report provides an up-to-date assessment of the Iranian petroleum sector and its likely evolution in the future.

  2. Crude petroleum

    International Nuclear Information System (INIS)

    1990-01-01

    Crude petroleum statistics by country of production, export values and import values from 1983 to 1988 are given. Table A.1 of the Annex includes free market prices and price indices for crude petroleum based on average of Dubai, United Kingdom Brent and Alaska N Slope crude prices (price expressed in dollars/barrel). The data sources are: Crude petroleum United Nations Statistical Office; OPEC Annual Statistical Bulletin, and Petroleum Economist. For trade the sources of data are: National trade statistics; United Nations international trade statistics; International Moneytary Fund (IMF); Organization of the Petroleum Exporting Countries (OPEC); UNCTAD secretariat estimates. Tabs

  3. Petroleum

    International Nuclear Information System (INIS)

    Anon.

    2000-01-01

    Here are gathered the results of the year 1999 concerning the petroleum industry in France ('UFIP' data), the market quotations of crude oil, the prices of fuels in France and in Portugal and some news about the petroleum industry in Algeria (privatization, exploration-offshore, repurchase), in Iraq (exports, contracts with foreign companies), in Russian Federation (petroleum pipelines and oil ports constructions) and in Chad (production sharing, offshore sites discoveries). (O.M.)

  4. Para-petroleum industry: international context. Results of the 2002 inquiry carried out by GEP, CEP and M and IFP (part. 2)

    International Nuclear Information System (INIS)

    Bensaid, B.; Fraysse, S.; Saniere, A.

    2003-01-01

    This article is the 2. part of the presentation of the inquiry about the 2002 economic results of the world para-petroleum industry: 1 - exploration-production: investments, geophysical activity (number of seismic survey teams, geophysical services market), drilling activity, construction of offshore production facilities (platforms construction, production equipments engineering), regional analysis (North America, North Sea, Latin America, Africa, Commonwealth of Independent States, Middle-East, Asia-Pacific). 2 - Refining and petrochemistry: economic context, refining industry expenses, fusions and results of refining companies, world petrochemical expenses, fusion and results of petrochemical companies. (J.S.)

  5. Total petroleum hydrocarbons: Characterization of physico-chemical behaviour and risks

    Energy Technology Data Exchange (ETDEWEB)

    Gemoets, J.; Lookman, R.; Vanermen, G.; Houtven, D. van; Bertels, D.; Weltens, R.; Cornelis, C. [VITO, Mol (Belgium); Vries, P. de; Sterren, G. van der; Alphenaar, A. [TTE, Deventer (Netherlands)

    2003-07-01

    Several methods are available for the characterization of petroleum hydrocarbons. Recently, the TPHCWG (Total Petroleum Hydrocarbon Criteria Working Group) developed a method based upon a silica column separation of aromatics and aliphatics and a GC-FID subdivision into equivalent-carbon fractions (EC) ('TPH-method'). Within NOBIS (Dutch Research program Biological I-situ Remediation), another method was developed based upon an equilibrium-experiment of the oil-polluted soil with water (column recirculation), which was further developed by TTE ('TTE-method'). This method uses measured water solubilities of individual oil components and GC-retention times yielding a subdivision of the hydrocarbons into compound classes. The present study aims at a verification (reproducibility; accuracy) and optimization of both methods and a critical review on the relevance of the proposed fractions for the prediction of human health risks. Two 'umpire' methods were selected for reference: GS-MS in full scan mode and liquid state NMR. (orig.)

  6. A case study: Residue reduction at Deer Park Refining Limited Partnership

    International Nuclear Information System (INIS)

    Geehan, D.M.

    1996-01-01

    With input from Shell Synthetic Fuels Inc. (SSFI), Deer Park Refining Limited Partnership (DPRLP) analyzed options for managing the bottom of the barrel to extinction, with an objective of high return on investment. DPRLP is a joint venture of PEMEX and Shell Oil Company. This Gulf Coast refiner processes 227M BBL/D of heavy, high sulfur crude. This paper discusses the process options considered, their advantages and disadvantages, and the option selected as well as the options still open. Recent modernization projects at DPRLP are now on stream with high yield of clean products.There remains one by-product, petroleum coke, which presents opportunity as a low cost feed for one or more process options yielding attractive products. The Shell Coke (or Coal) Gasification Process is one of the options now being considered

  7. Description of the global petroleum supply and demand outlook

    International Nuclear Information System (INIS)

    Dreyfus, D.A.; Koklauner, A.B.

    1992-12-01

    Strategic planning of the research and development program carried out by Gas Research Institute (GRI) is supported by an annual GRI baseline projection of US energy supply and demand. Because petroleum products compete in a wide variety of energy uses, oil prices serve as a market clearing force for the entire energy system. A significant portion of the US petroleum supply is imported, and the price of crude oil to US refiners is determined by the international oil trade. Any projection of a US energy situation, therefore, requires the evaluation of the global oil market and the impact of oil price changes on the supply/demand balances of market participants. The 1992 edition of the projection, which was completed in August 1991, assumed that, in the aftermath of the war in the Middle East, the fundamentals of the oil trade would reassert their influence. This did indeed occur and with astonishing rapidity

  8. Report to Congress on the feasibility of establishing a heating oil component to the Strategic Petroleum Reserve. Volume 2: Appendices

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-06-01

    Nine appendices to the main report are included in this volume. They are: Northeastern US distillate supply systems; New England fuel oil storage capacities and inventories; Characteristics of the northeast natural gas market; Documentation of statistical models and calculation of benefits; Regional product reserve study; Other countries` experience with refined product storage; Global refining supply demand appraisal; Summary of federal authorities relevant to the establishment of petroleum product reserves; Product stability and turnover requirements.

  9. Chemical Technology Division annual technical report, 2001

    International Nuclear Information System (INIS)

    Lewis, D.; Gay, E. C.; Miller, J. C.; Boparai, A. S.

    2002-01-01

    The Chemical Technology Division (CMT) is one of eight engineering research divisions within Argonne National Laboratory, one of the U.S. government's oldest and largest research laboratories. The University of Chicago oversees the laboratory on behalf of the U.S. Department of Energy (DOE). Argonne's mission is to conduct basic scientific research, to operate national scientific facilities, to enhance the nation's energy resources, and to develop better ways to manage environmental problems. Argonne has the further responsibility of strengthening the nation's technology base by developing innovative technology and transferring it to industry. CMT is a diverse early-stage engineering organization, specializing in the treatment of spent nuclear fuel, development of advanced electrochemical power sources, and management of both high- and low-level nuclear wastes. Although this work is often indistinguishable from basic research, our efforts are directed toward the practical devices and processes that are covered by Argonne's mission. Additionally, the Division operates the Analytical Chemistry Laboratory and Environment, Safety, and Health Analytical Chemistry services, which provide a broad range of analytical services to Argonne and other organizations. The Division is multidisciplinary. Its people have formal training as ceramists; physicists; material scientists; electrical, mechanical, chemical, and nuclear engineers; and chemists. They have experience working in academia; urban planning; and the petroleum, aluminum, and automotive industries. Their skills include catalysis, ceramics, electrochemistry, metallurgy, nuclear magnetic resonance spectroscopy, and petroleum refining, as well as the development of nuclear waste forms, batteries, and high-temperature superconductors

  10. Beyond petrochemicals: The renewable chemicals industry

    DEFF Research Database (Denmark)

    Vennestrøm, P.N.R.; Osmundsen, Christian Mårup; Christensen, C.H.

    2011-01-01

    From petroleum to bioleum: Since biomass is a limited resource, it is necessary to consider its best use. The production of select chemicals from biomass, rather than its use as fuel, could effectively replace the use of petroleum in the chemical industry, but the inherent functionality of biomas...

  11. Simultaneous application of chemical oxidation and extraction processes is effective at remediating soil Co-contaminated with petroleum and heavy metals.

    Science.gov (United States)

    Yoo, Jong-Chan; Lee, Chadol; Lee, Jeung-Sun; Baek, Kitae

    2017-01-15

    Chemical extraction and oxidation processes to clean up heavy metals and hydrocarbon from soil have a higher remediation efficiency and take less time than other remediation processes. In batch extraction/oxidation process, 3% hydrogen peroxide (H 2 O 2 ) and 0.1 M ethylenediaminetetraacetic acid (EDTA) could remove approximately 70% of the petroleum and 60% of the Cu and Pb in the soil, respectively. In particular, petroleum was effectively oxidized by H 2 O 2 without addition of any catalysts through dissolution of Fe oxides in natural soils. Furthermore, heavy metals bound to Fe-Mn oxyhydroxides could be extracted by metal-EDTA as well as Fe-EDTA complexation due to the high affinity of EDTA for metals. However, the strong binding of Fe-EDTA inhibited the oxidation of petroleum in the extraction-oxidation sequential process because Fe was removed during the extraction process with EDTA. The oxidation-extraction sequential process did not significantly enhance the extraction of heavy metals from soil, because a small portion of heavy metals remained bound to organic matter. Overall, simultaneous application of oxidation and extraction processes resulted in highly efficient removal of both contaminants; this approach can be used to remove co-contaminants from soil in a short amount of time at a reasonable cost. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Panorama 2001 energy and petroleum, the new international deal

    International Nuclear Information System (INIS)

    Brodhag, Ch.

    2001-01-01

    For the industrialized countries, the rapid economic growth presents constraints stemming from public concern over questions of environment and safety. In response to these changes the petroleum industry and the petrochemistry are confronted to a double challenge which is discussed in this document: from the technical point of view, the carbon emissions decrease and the refining; from an economic point of view, the Kyoto negotiation, the geo-political stakes, the OPEC the United States and the European positions and the benefit of allowance stemming from the expensive energy prices. (A.L.B.)

  13. Rationalization of imports, refineries and distribution of petroleum in Sub-Saharan Africa

    International Nuclear Information System (INIS)

    Mayorga Alba, E.

    1993-01-01

    This paper outlines policies to secure and reduce the cost of oil supplies in Sub-Saharan Africa (SSA), taking into account the existing forces at play: limited foreign exchange, competition for increasingly scarce funds, and the likely emergence of Africa as the fastest growing centre of energy demand over the coming decade. It identifies major inefficiencies in petroleum procurement, refining and distribution, and analyses the specific bottlenecks at each stage of the supply chain. Many of the diseconomies, estimated to yield savings of US$ 1.4 per year, are traced to an inefficient regulatory set-up in SSA countries, as well as unnecessary government interference in the downstream petroleum sector. In particular, price controls, small topping refineries, monopolistic agencies, government subsidies and opaque management structures prevent the working of efficient market mechanisms. The paper discusses the importance of policy reform, outlining what changes need to be implemented on the levels of institutional arrangements, closing of inefficient units, petroleum pricing and encouraging foreign investment in the sector. (author). 1 ref., 7 figs

  14. Petroleum

    International Nuclear Information System (INIS)

    Anon.

    2000-01-01

    Here are briefly summarized 1)the OPEC decisions and their consequences concerning the production of petroleum in the world 2)some news about the petroleum industry in Chad and in Iraq 3)some news about the new pipelines constructed or to be constructed in the world 4)some news about the LPG industry (start of a LPG extraction unit in Argentina, legislation in France for LPG vehicles) 4)and some news about the petroleum distribution in France. (O.M.)

  15. Natural gas to buoy Trinidad and Tobago petroleum sector

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Trinidad and Tobago's petroleum sector remains at a crossroads. While heavily reliant on oil and gas for domestic energy consumption and hard currency export earnings, the small Caribbean island nation faces some tough choices in reviving its hydrocarbon sector in the 1990s. Exploration and production of crude oil have stagnated in recent years, and domestic refinery utilization remains low at 36%. However, substantial natural gas reserves in Trinidad and Tobago offer the promise of a burgeoning natural gas based economy with an eye to liquefied natural gas and gas based petrochemical exports. Any solutions will involve considerable outlays by the government as well as a sizable infusion of capital by foreign companies. Therein lie some of the hard choices. The article describes the roles of oil and gas, foreign investment prospects, refining status, refining problems, gas sector foreign investment, and outlook for the rest of the 1990's

  16. CG/MS quantitation of diamondoid compounds in crude oils and petroleum products

    International Nuclear Information System (INIS)

    Yang, C.; Wang, Z.D.; Hollebone, B.P.; Fingas, M.; Peng, X.; Landriault, M.

    2006-01-01

    Diamondoids are a class of saturated hydrocarbons that consist of 3-dimensionally fused cyclohexane rings. Diamondoid compounds in petroleum are the result of carbonium ion rearrangements of cyclic precursors on clay superacids in the source rock during oil generation. They are considered to be a problem due to their deposition during production of reservoir fluids and transportation of natural gas, gas condensates and light crude oils. At high concentrations, and with changes in pressure and temperature, diamondoid compounds can segregate out of reservoir fluids during production. Environmental scientists have considered fingerprinting the diamondoid hydrocarbons as a forensic method for oil spill studies. Since diamondoid compounds are thermodynamically stable, they have potential applications in oil-source correlation and differentiation for cases where traditional biomarker terpanes and steranes are absent because of environmental weathering or refining of petroleum products. Although there is increased awareness of possible use of diamondoid compounds for source identification, there is no systematic approach for using these compounds. Quantitative surveys of the abundances of diamondoids are not available. Therefore, this study developed a reliable analytical method for quantitative diamondoid analysis. Gas chromatography/mass spectrometry (GC/MS) was used to quantitatively determine diamondoid compounds (adamantane, diamantane and their alkylated homologues) in 14 fresh crude oils and 23 refined petroleum products, including light and mid-range distillate fuels, residual fuels and lubricating oils collected from different sources. Results were compared with 2 types of biomarker compounds in oil saturated hydrocarbon fractions. Several diagnostic ratios of diamondoids were developed based on their concentrations. Their potential use for forensic oil spill source identification was evaluated. 24 refs., 8 tabs., 4 figs

  17. A Comparative Study of Chemically and Biologically Synthesized MgO Nanomaterial for Liquefied Petroleum Gas Detection

    Science.gov (United States)

    Thirupathi, Rampelly; Solleti, Goutham; Sreekanth, Tirumala; Sadasivuni, Kishor Kumar; Venkateswara Rao, Kalagadda

    2018-03-01

    The exceptional chemical and physical properties of nanostructured materials are extremely suitable for designing new and enhanced sensing devices, particularly gas sensors and biosensors. The present work describes the synthesis of magnesium oxide (MgO) nanoparticles through two methods: a green synthesis using aloe vera plant extract and a chemical method using a glycine-based solution combustion route. In a single step, the extracted organic molecules from aloe vera plants were used to reduce metal ions by the green method. MgO nanoparticles were coated onto the interdigital electrode using the drop-drying method. The dynamic gas-sensing characteristics were measured for liquefied petroleum gas (LPG) at different concentrations and various temperatures. The MgO nanoparticles were characterized by using x-ray diffraction, field emission scanning electron microscopy, and high-resolution transmission electron microscopy to determine the size and structure of the particles. The product's functional properties were analyzed by Fourier transform-infrared spectroscopy and UV-visible spectroscopy. We found that the LPG sensing behavior of biologically synthesized MgO registers excellent sensitivity at various operating temperatures.

  18. Creating a simplified model of oil refining and solution of the model using a linear programming method. Part 1, Model presentation

    Energy Technology Data Exchange (ETDEWEB)

    Duric, M; Novakovic, M; Stojkanovic, L

    1983-01-01

    Based on a detailed analysis of technological limitations in oil refining at an oil refinery (NPZ) in the separation of petroleum products, specifications with regard to quality and market limitations, a general model is created of oil refining. The number of actual variables is reduced to a minimum, while the number of linear limitations is adapted to the selected technology and raw material quality. The nonlinearity of certain characteristics is overcome using the so called movement factor.

  19. Linkages between the markets for crude oil and the markets for refined products

    International Nuclear Information System (INIS)

    Didziulis, V.S.

    1990-01-01

    To understand the crude oil price determination process it is necessary to extend the analysis beyond the markets for petroleum. Crude oil prices are determined in two closely related markets: the markets for crude oil and the markets for refined products. An econometric-linear programming model was developed to capture the linkages between the markets for crude oil and refined products. In the LP refiners maximize profits given crude oil supplies, refining capacities, and prices of refined products. The objective function is profit maximization net of crude oil prices. The shadow price on crude oil gives the netback price. Refined product prices are obtained from the econometric models. The model covers the free world divided in five regions. The model is used to analyze the impacts on the markets of policies that affect crude oil supplies, the demands for refined products, and the refining industry. For each scenario analyzed the demand for crude oil is derived from the equilibrium conditions in the markets for products. The demand curve is confronted with a supply curve which maximizes revenues providing an equilibrium solution for both crude oil and product markets. The model also captures crude oil price differentials by quality. The results show that the demands for crude oil are different across regions due to the structure of the refining industries and the characteristics of the demands for refined products. Changes in the demands for products have a larger impact on the markets than changes in the refining industry. Since markets for refined products and crude oil are interrelated they can't be analyzed individually if an accurate and complete assessment of a policy is to be made. Changes in only one product market in one region affect the other product markets and the prices of crude oil

  20. Association models for petroleum applications

    DEFF Research Database (Denmark)

    Kontogeorgis, Georgios

    2013-01-01

    Thermodynamics plays an important role in many applications in the petroleum industry, both upstream and downstream, ranging from flow assurance, (enhanced) oil recovery and control of chemicals to meet production and environmental regulations. There are many different applications in the oil & gas...... industry, thus thermodynamic data (phase behaviour, densities, speed of sound, etc) are needed to study a very diverse range of compounds in addition to the petroleum ones (CO2, H2S, water, alcohols, glycols, mercaptans, mercury, asphaltenes, waxes, polymers, electrolytes, biofuels, etc) within a very....... Such association models have been, especially over the last 20 years, proved to be very successful in predicting many thermodynamic properties in the oil & gas industry. They have not so far replaced cubic equations of state, but the results obtained by using these models are very impressive in many cases, e...

  1. Method for quantifying the fate of petroleum in the environment

    International Nuclear Information System (INIS)

    Mills, M.A.; McDonald, T.J.; Bonner, J.S.; Simon, M.A.; Autenrieth, R.L.

    1999-01-01

    Petroleum is a complex mixture of a wide range of hydrocarbon and non-hydrocarbon compounds of various physical and chemical properties. In recent years, the research on the fate of petroleum in the environment has required analytical methods that can provide more detailed information on the components of petroleum than traditional standard methods. The analytical method presented for aqueous, sediment, and soil samples provides several levels of information on petroleum in the environment. The Total Extractable Materials (TEM) analysis provides a gross measure of petroleum in the environment using methylene chloride extraction and gravimetric analysis. Gross composition analysis separates the methylene chloride extract into a saturate hydrocarbon, an aromatic hydrocarbon, and a polar fraction each measured gravimetrically. In contrast, the target compound analysis provides a detailed measure by GC-MS of 62 specific compounds. Normalization to the conservative compound, 17α, 21β-(H)Hopane, is incorporated into the method to reduce the effects of sample and site heterogeneity. Quality control and quality assurance procedures are integral parts of these analyses to assure the validity of the resulting data. (author)

  2. Chemical Technology Division Annual Report 2000

    International Nuclear Information System (INIS)

    Lewis, D.; Gay, E. C.; Miller, J. F.; Einziger, R. E.; Green, D. W.

    2001-01-01

    The Chemical Technology Division (CMT) is one of eight engineering research divisions within Argonne National Laboratory (ANL), one of the U.S. government's oldest and largest research laboratories. The University of Chicago oversees the laboratory on behalf of the U.S. Department of Energy (DOE). Argonne's mission is to conduct basic scientific research, to operate national scientific facilities, to enhance the nation's energy resources, and to develop better ways to manage environmental problems. Argonne has the further responsibility of strengthening the nation's technology base through developing industrial technology and transferring that technology to industry. The Chemical Technology Division is a diverse early-stage engineering organization, specializing in the treatment of spent nuclear fuel, development of advanced power sources, and management of both high- and low-level nuclear wastes. Although this work is often indistinguishable from basic research, our efforts are directed toward the practical devices and processes that are covered by ANL's mission. Additionally, the Division operates the Analytical Chemistry Laboratory, which provides a broad range of analytical services to ANL and other organizations. The Division is multi-disciplinary. Its people have formal training as ceramists; physicists; material scientists; electrical, mechanical, chemical, and nuclear engineers; and chemists. They have experience working in academia, urban planning, and the petroleum, aluminum, and automotive industries. Their skills include catalysis, ceramics, electrochemistry, metallurgy, nuclear magnetic resonance spectroscopy, and petroleum refining, as well as the development of nuclear waste forms, batteries, and high-temperature superconductors. In this annual report we present an overview of the technical programs together with representative highlights. The report is not intended to be comprehensive or encyclopedic, but to serve as an indication of the condition

  3. Cooperation needed for securing Japan's imports of refined products from neighbors

    International Nuclear Information System (INIS)

    Koyama, Yasuo; Ogawa, Yoshike

    1996-01-01

    As of April 1996, Japan repealed the Provisional Law on Importation of Specified Petroleum Products (Plispp), thus further freeing imports from regulation. Since the dawn of the 1990s, Asia has suffered an imbalance of soaring oil demand and lack of refining capacity. In addition, to intraregional trade, product imports from outside the region, such as the US West Coast and the Mediterranean Sea, have expanded. Given such conditions in Asia, as well as japan's stringent product specifications for environmental reasons, potential exporters of the three specified products (gasoline, diesel, and kerosene) in Asia should virtually be limited to the Republic of Korea (ROK), Taiwan, and Singapore. This study is designed to make an in-depth examination of the current and future supply/demand and trade for refined products of the three countries with respect to Japan's potential import needs

  4. Content of nitrogen in waste petroleum carbon for steel industries

    International Nuclear Information System (INIS)

    Rios, R.O; Jimenez, A.F; Szieber, C.W; Banchik, A.D

    2004-01-01

    Steel industries use refined carbon as an alloy for steel production. This alloy is produced from waste carbon from the distillation of the petroleum. The refined carbon, called recarburizer, is obtained by calcination at high temperature. Under these thermal conditions the organic molecules decompose and a fraction of the N 2 , S and H 2 , volatile material and moisture are released; while the carbon tends to develop a crystalline structure similar to graphite's. The right combination of calcinations temperature and time in the furnace can optimize the quality of the resulting product. The content of S and N 2 has to be minimized for the use of calcined carbon in the steel industry. Nitrogen content should be reduced by two orders of magnitude, from 1% - 2% down to hundreds of ppm by weight. This work describes the activities undertaken to obtain calcined coke from petroleum from crude oil carbon that satisfies the requirements of the Mercosur standard 02:00-169 (Pending) for use as a carborizer in steels industries. To satisfy the requirements of the Mercosur standards NM 236:00 IRAM-IAS-NM so that graphite is used as a carburizer a content of 300 ppm maximum weight of nitrogen has to be obtained. So the first stage in this development is to define a production process for supplying calcined coke in the range of nitrogen concentrations required by the Mercosur standards (CW)

  5. Chemical modification of cobalt ferrite nanoparticles with possible application as asphaltene flocculant agent

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, G.E.; Clarindo, J.E.S.; Santo, K.S.E., E-mail: geiza.oliveira@ufes.br [Universidade Federal do Espirito Santo (CCE/DQUI/UFES), Vitoria, ES (Brazil). Centro de Ciencias Exatas. Dept. de Quimica; Souza Junior, F.G. [Universidade Federal do Rio de Janeiro (IMA/UFRJ), Rio de Janeiro, RJ (Brazil). Instituto de Macromoleculas

    2013-11-01

    Asphaltenes can cause enormous losses in the oil industry, because they are soluble only in aromatic solvents. Therefore, they must be removed from the petroleum before it is refined, using flocculant agents. Aiming to find new materials that can work as flocculant agents to asphaltenes, cobalt ferrite nanoparticles were chemically modified through acid-base reactions using dodecylbenzene sulfonic acid (DBSA) to increase their lipophilicity. Nanoparticle synthesis was performed using the co-precipitation method followed by annealing of these nanoparticles, aiming to change the structural phase. Modified and unmodified nanoparticles were tested by FTIR-ATR, XRD and TGA/DTA. In addition, precipitation onset of the asphaltenes was performed using modified and unmodified nanoparticles. These tests showed that modified nanoparticles have a potential application as flocculant agents used to remove asphaltenes before oil refining, since the presence of nanoparticles promotes the asphaltene precipitation onset with the addition of a small amount of non-solvent (author)

  6. Chemical modification of cobalt ferrite nanoparticles with possible application as asphaltene flocculant agent

    International Nuclear Information System (INIS)

    Oliveira, G.E.; Clarindo, J.E.S.; Santo, K.S.E.; Souza Junior, F.G.

    2013-01-01

    Asphaltenes can cause enormous losses in the oil industry, because they are soluble only in aromatic solvents. Therefore, they must be removed from the petroleum before it is refined, using flocculant agents. Aiming to find new materials that can work as flocculant agents to asphaltenes, cobalt ferrite nanoparticles were chemically modified through acid-base reactions using dodecylbenzene sulfonic acid (DBSA) to increase their lipophilicity. Nanoparticle synthesis was performed using the co-precipitation method followed by annealing of these nanoparticles, aiming to change the structural phase. Modified and unmodified nanoparticles were tested by FTIR-ATR, XRD and TGA/DTA. In addition, precipitation onset of the asphaltenes was performed using modified and unmodified nanoparticles. These tests showed that modified nanoparticles have a potential application as flocculant agents used to remove asphaltenes before oil refining, since the presence of nanoparticles promotes the asphaltene precipitation onset with the addition of a small amount of non-solvent (author)

  7. PETRORISK: a risk assessment framework for petroleum substances.

    Science.gov (United States)

    Redman, Aaron D; Parkerton, Thomas F; Comber, Mike H I; Paumen, Miriam Leon; Eadsforth, Charles V; Dmytrasz, Bhodan; King, Duncan; Warren, Christopher S; den Haan, Klaas; Djemel, Nadia

    2014-07-01

    PETRORISK is a modeling framework used to evaluate environmental risk of petroleum substances and human exposure through these routes due to emissions under typical use conditions as required by the European regulation for the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH). Petroleum substances are often complex substances comprised of hundreds to thousands of individual hydrocarbons. The physicochemical, fate, and effects properties of the individual constituents within a petroleum substance can vary over several orders of magnitude, complicating risk assessment. PETRORISK combines the risk assessment strategies used on single chemicals with the hydrocarbon block approach to model complex substances. Blocks are usually defined by available analytical characterization data on substances that are expressed in terms of mass fractions for different structural chemical classes that are specified as a function of C number or boiling point range. The physicochemical and degradation properties of the blocks are determined by the properties of representative constituents in that block. Emissions and predicted exposure concentrations (PEC) are then modeled using mass-weighted individual representative constituents. Overall risk for various environmental compartments at the regional and local level is evaluated by comparing the PECs for individual representative constituents to corresponding predicted no-effect concentrations (PNEC) derived using the Target Lipid Model. Risks to human health are evaluated using the overall predicted human dose resulting from multimedia environmental exposure to a substance-specific derived no-effect level (DNEL). A case study is provided to illustrate how this modeling approach has been applied to assess the risks of kerosene manufacture and use as a fuel. © 2014 SETAC.

  8. Treatment of paraffin problems in petroleum production with chemicals; Tratamento de problemas parafinicos com agentes quimicos na producao de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Jennings, David; Yin, Ralph; Weispfennig, Klaus; Newberry, Mike [Baker Petrolite, Sugar Land, TX (United States)

    2004-07-01

    Paraffin problems can greatly reduce production of certain crude oils, if correct methods to control the problems are not used. These problems are primarily related to flow line deposition and reduction in crude oil flow properties caused by wax network growth. Deep water production and production of high-wax content crude oils can be especially problematic. Much of the petroleum production in Brazil falls in these categories: in the Campos Basin and in Bahia. Paraffin problems can be controlled with diverse methods. These methods include use of: pigging, insulation, heating, and chemicals. Sometimes, the use of chemicals can be very practical, alone or in combination with other methods. This paper discusses the use of chemicals for the treatment of paraffin problems. Three types of treatments are discussed: prevention of deposition in flow lines with paraffin inhibitors; improvement in flow properties of crude oils with pour point depressants, and removal of paraffin deposits with dispersants. The discussion includes the physical effects of the treatment chemicals and field examples. (author)

  9. Bioremediation of petroleum wastes from the refining of lubricant oils

    International Nuclear Information System (INIS)

    Prince, M.; Sambasivam, Y.

    1993-01-01

    The results of an initial feasibility study on the bioremediation of sludge are presented. The sludge used in the study was taken from a site containing waste produced during the refining of lubricant oils to which sulfuric acid had been added. The effectiveness of bioremediation was examined using shake flask experiments with indigenous and other bacteria sources and nutrient supplementation. The initial results show limited effectiveness of biological treatment at conditions employing indigenous bacteria and low (2%) sludge concentrations in Bushnell-Haas media. In addition, the indigenous bacteria were seen to degrade the polycyclic aromatic hydrocarbons naphthalene, penanthrene and pyrene which are present at some locations at the site. No apparent degradation of material was seen using conditions of high (30%) sludge concentrations in Bushnell-Haas medium under a variety of conditions. In addition, nutrients were rapidly depleted at these sludge concentrations, with the exception of sulfates which were produced when high sludge concentrations were used. 23 refs., 8 figs., 3 tabs

  10. A method for predicting the extent of petroleum hydrocarbon biodegradation in contaminated soils

    International Nuclear Information System (INIS)

    Huesemann, M.H.

    1994-01-01

    A series of solid- and slurry-phase soil bioremediation experiments involving different crude oils and refined petroleum products were performed to investigate the factors which affect the maximum extent of total petroleum hydrocarbon (TPH) biodegradation. The authors used a comprehensive petroleum hydrocarbon characterization procedure involving group-type separation analyses, boiling-point distributions, and hydrocarbon typing by field ionization mass spectroscopy. Initial and final concentrations of specified hydrocarbon classes were determined in each of seven different bioremediation treatments. Generally, they found that the degree of TPH biodegradation was affected mainly by the type of hydrocarbons in the contaminant matrix. In contrast, the influence of experimental variables such as soil type, fertilizer concentrations, microbial plate counts, and treatment type (slurry versus landfarming) on the overall extent of TPH biodegradation was insignificant. Based on these findings, a predictive algorithm was developed to estimate the extent of TPH biodegradation from the average reduction of 86 individual hydrocarbon classes and their respective initial concentrations. Model predictions for gravimetric TPH removals were in close agreement with analytical results from two independent laboratories

  11. U.S. petroleum strategies in the decade of the environment

    International Nuclear Information System (INIS)

    Williams, B.

    1991-01-01

    The book offer guidance and recommendations for strategies in the coming decade, based on research, interviews, and almost a decade of specializing in reporting on environmental issues in the petroleum industry. Included will be a chapter on crisis management. This book contains the catalyst: Exxon Valdez spill; The More things change; The new consciousness; Government leads the way; New approaches; Natural gas: fuel of the future; Strategies for U.S. explorationists; Drilling production strategies; Transportation strategies; Strategies for refiners marketers; Petrochemicals and gas processing strategies; The public, media, and crisis management; Battle plans

  12. Bauxite Mining and Alumina Refining

    Science.gov (United States)

    Frisch, Neale; Olney, David

    2014-01-01

    Objective: To describe bauxite mining and alumina refining processes and to outline the relevant physical, chemical, biological, ergonomic, and psychosocial health risks. Methods: Review article. Results: The most important risks relate to noise, ergonomics, trauma, and caustic soda splashes of the skin/eyes. Other risks of note relate to fatigue, heat, and solar ultraviolet and for some operations tropical diseases, venomous/dangerous animals, and remote locations. Exposures to bauxite dust, alumina dust, and caustic mist in contemporary best-practice bauxite mining and alumina refining operations have not been demonstrated to be associated with clinically significant decrements in lung function. Exposures to bauxite dust and alumina dust at such operations are also not associated with the incidence of cancer. Conclusions: A range of occupational health risks in bauxite mining and alumina refining require the maintenance of effective control measures. PMID:24806720

  13. Petroleum and natural gas economy in Arab countries and in Angola, Gabon, Iran, Nigeria

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This paper gives informations about petroleum and natural gas industry, petroleum market and prices, trade and contracts, prospection and production. In Saudi Arabia, the debate about the price reduction of butane used to produce methyl tertiary butyl ether (MTBE) is responsible of the cancellation of joint venture project between Mobil and Arabian Chemical Investment Corp. In Algeria, Japan brings its support to the development of Liquefied Petroleum Gases industry and has signed two exports contracts. New petroleum discoveries have been made in Oman, near Suneinah and in Egypt near Belayim offshore oil field. Petroleum production has reached 3.6 millions barrels per day in Iran, 0.35 millions barrels per day in Gabon and 0.177 millions barrels per day in Nigeria

  14. Treatment of products from petroleum, shale, coal, lignite, etc

    Energy Technology Data Exchange (ETDEWEB)

    Jevanoff, V

    1952-06-20

    An improved process is described for treating with sodium plumbite all the products derived from crude petroleum, bituminous shale, coal, lignite, peat, etc., such as gasoline, solvents, lamp oil, gas oil, fuels, etc; the process being essentially characterized by the fact that it consists first in washing the product to be refined with a soda wash; submitting it to a treatment with sodium plumbite, without addition of sulfur, then to eliminate the sulfur plumbite compounds resulting in the treated product, using either redistillation to eliminate products remaining in the residue or filtration over an absorbing material such as active carbon, decolorizing earths.

  15. Ecological risk assessment of a site contaminated with petroleum hydrocarbons

    International Nuclear Information System (INIS)

    Starodub, M.E.; Feniak, N.A.; Willes, R.F.; Moore, C.E.; Mucklow, L.

    1995-01-01

    The aquatic and terrestrial health risks associated with petroleum contamination on a decommissioned military base, contaminated with products ranging from Bunker C oil to aviation fuel, were assessed using a methodology whereby an analytical measurement of total petroleum hydrocarbons (TPH) could be correlated with compositional characterization and thus with toxicity. The constituents of petroleum hydrocarbon contamination represent wide ranges of physical-chemical properties, environmental fate, and toxicity. The composition of TPH can vary greatly, dependent on the sources or fuel types and the interaction of age as well as site- and chemical-specific characteristics in determining the impact of weathering processes. Therefore, a bulk sum analysis of TPH cannot be related to toxicity without characterization of its composition and association of the constituents, and therefore composition, with actual toxicity data. To address this need, the constituents of TPH were represented by surrogate chemicals, with selection based on structure-activity relationships and available toxicity data. Toxicological profiles were developed from governmental regulations and on the published literature for both the aquatic and terrestrial media. Risk characterization consisted of a comparison of water concentration limits and exposure limits, developed for each surrogate, to estimated surrogate concentrations throughout the site. The concentrations of surrogates were extrapolated from TPH composition characterization analyses, conducted at a select number of sampling locations, to bulk sum analyses of TPH at related sampling locations

  16. Resistance and Resilience of Soil Microbial Communities Exposed to Petroleum-Derived Compounds

    DEFF Research Database (Denmark)

    Modrzynski, Jakub Jan

    Functioning of soil microbial communities is generally considered resilient to disturbance, including chemical stress. Activities of soil microbial communities are often sustained in polluted environments due to exceptional plasticity of microbial communities and functional redundancy. Pollution......-induced community tolerance (PICT) often develops following chemical stress. Nonetheless, environmental pollution may severely disturb functioning of soil microbial communities, thereby threatening provision of important ecosystem services provided by microorganisms. Pollution with petroleum and petroleum......-derived compounds (PDCs) is a significant environmental problem on a global scale. Research addressing interactions between microorganisms and PDC pollution is dominated by studies of biodegradation, with less emphasis on microbial ecotoxicology. Soil microbial communities are generally considered highly resilient...

  17. Compatibility of agriculture and petroleum industry

    International Nuclear Information System (INIS)

    Edwards, W.C.

    1992-01-01

    Problems observed in the interaction of agriculture and the petroleum industry are discussed. A wide variety of chemicals are used at drill sites. Caustic soda, chromates, asbestos, crude oil, and thread collar compound (30-50% lead) can all cause cattle poisoning. Cattle can fall into mud pits and drown. Well fracking can lead to spillage of acids onto pasture or crop land. After well production, animal poisonings can occur from salt water or lead from oil and grease, and injuries can be caused by the moving parts of the pumper unit. Salt water ingestion is a common problem, and salt concentrations >1% in drinking water can cause salt poisoning. Arsenic- and chromate-based corrosion inhibitors can cause poisoning of cattle. Broken transmission lines and leakage of petroleums allow cattle access to these substances

  18. Development of a security vulnerability assessment process for the RAMCAP chemical sector.

    Science.gov (United States)

    Moore, David A; Fuller, Brad; Hazzan, Michael; Jones, J William

    2007-04-11

    The Department of Homeland Security (DHS), Directorate of Information Analysis & Infrastructure Protection (IAIP), Protective Services Division (PSD), contracted the American Society of Mechanical Engineers Innovative Technologies Institute, LLC (ASME ITI, LLC) to develop guidance on Risk Analysis and Management for Critical Asset Protection (RAMCAP). AcuTech Consulting Group (AcuTech) has been contracted by ASME ITI, LLC, to provide assistance by facilitating the development of sector-specific guidance on vulnerability analysis and management for critical asset protection for the chemical manufacturing, petroleum refining, and liquefied natural gas (LNG) sectors. This activity involves two key tasks for these three sectors: Development of a screening to supplement DHS understanding of the assets that are important to protect against terrorist attack and to prioritize the activities. Development of a standard security vulnerability analysis (SVA) framework for the analysis of consequences, vulnerabilities, and threats. This project involves the cooperative effort of numerous leading industrial companies, industry trade associations, professional societies, and security and safety consultants representative of those sectors. Since RAMCAP is a voluntary program for ongoing risk management for homeland security, sector coordinating councils are being asked to assist in communicating the goals of the program and in encouraging participation. The RAMCAP project will have a profound and positive impact on all sectors as it is fully developed, rolled-out and implemented. It will help define the facilities and operations of national and regional interest for the threat of terrorism, define standardized methods for analyzing consequences, vulnerabilities, and threats, and describe best security practices of the industry. This paper will describe the results of the security vulnerability analysis process that was developed and field tested for the chemical manufacturing

  19. Development of a security vulnerability assessment process for the RAMCAP chemical sector

    International Nuclear Information System (INIS)

    Moore, David A.; Fuller, Brad; Hazzan, Michael; Jones, J. William

    2007-01-01

    The Department of Homeland Security (DHS), Directorate of Information Analysis and Infrastructure Protection (IAIP), Protective Services Division (PSD), contracted the American Society of Mechanical Engineers Innovative Technologies Institute, LLC (ASME ITI, LLC) to develop guidance on Risk Analysis and Management for Critical Asset Protection (RAMCAP). AcuTech Consulting Group (AcuTech) has been contracted by ASME ITI, LLC, to provide assistance by facilitating the development of sector-specific guidance on vulnerability analysis and management for critical asset protection for the chemical manufacturing, petroleum refining, and liquefied natural gas (LNG) sectors. This activity involves two key tasks for these three sectors:*Development of a screening to supplement DHS understanding of the assets that are important to protect against terrorist attack and to prioritize the activities. *Development of a standard security vulnerability analysis (SVA) framework for the analysis of consequences, vulnerabilities, and threats. This project involves the cooperative effort of numerous leading industrial companies, industry trade associations, professional societies, and security and safety consultants representative of those sectors. Since RAMCAP is a voluntary program for ongoing risk management for homeland security, sector coordinating councils are being asked to assist in communicating the goals of the program and in encouraging participation. The RAMCAP project will have a profound and positive impact on all sectors as it is fully developed, rolled-out and implemented. It will help define the facilities and operations of national and regional interest for the threat of terrorism, define standardized methods for analyzing consequences, vulnerabilities, and threats, and describe best security practices of the industry. This paper will describe the results of the security vulnerability analysis process that was developed and field tested for the chemical manufacturing

  20. Petroleum fiscality indicators

    International Nuclear Information System (INIS)

    2008-02-01

    This document presents the different taxes imposed to petroleum products in France: domestic tax on petroleum products (TIPP) and added value tax (TVA). A comparison is made with the fiscality into effect in other European countries for some petroleum products. Then, the fiscality is detailed for the different petroleum products and automotive fuels with its regional modulations. Finally, the fiscal measures adopted in 2007 are detailed. They concern the transposition of the European directive 2003-96/CE into French right and some fiscal regime changes given to some economical sectors particularly penalized by the rise of petroleum energy prices in 2007. (J.S.)

  1. The Use of encapsulation techniques as an alternative to employment of soil contaminated by petroleum products in base and sub-base of pavement layers

    OpenAIRE

    Francisco das Chagas Isael Teixeira Cavalcante

    2013-01-01

    The petrochemical industry or petroleum deserves special attention because, in practically all stages (drilling, refining, storage and distribution), residues that harm the environment and is a challenge to those responsible for their management are generated. Among the various wastes generated by the oil industry, are the Soils Contaminated by Petroleum Products (SCPD). In Cearà state, the generation of this type of waste is coming from a refinery that is located in Fortaleza city. During ma...

  2. Studies on the effect of petroleum hydrocarbon on the microbial and ...

    African Journals Online (AJOL)

    SERVER

    2007-08-20

    Aug 20, 2007 ... Key words: Hydrocarbon, microbial counts, physico-chemical characteristics. INTRODUCTION. Petroleum ... carbons, whose composition also varies with the source. ... hydrocarbons into aquifers can lead to concentrations of.

  3. Comparative study on sulphur reduction from heavy petroleum - Solvent extraction and microwave irradiation approach

    Energy Technology Data Exchange (ETDEWEB)

    Mohammed, Abdullahi Dyadya; Isah, Abubakar Garba; Umaru, Musa; Ahmed, Shehu [Department of Chemical Engineering, Federal University of Technology, P.M.B 65, Minna (Nigeria); Abdullahi, Yababa Nma [National Petroleum Investment Management Services (Nigeria National Petroleum Corporation), Lagos (Nigeria)

    2012-07-01

    Sulphur- containing compounds in heavy crude oils are undesirable in refining process as they affect the quality of the final product, cause catalyst poisoning and deactivation in catalytic converters as well as causing corrosion problems in oil pipelines, pumps and refining equipment aside environmental pollution from their combustion and high processing cost. Sulphur reduction has being studied using microwave irradiation set at 300W for 10 and 15minutes and oxidative- solvent extraction method using n- heptane and methanol by 1:1, 1:2 and 1:3 crude- solvent ratios after being oxidized with hydrogen peroxide, H2O2 oxidants. Percentage sulphur removal with n- heptane solvent by 1:1 and 1:2 are 81.73 and 85.47%; but extraction using methanol by different observed ratios gave less sulphur reduction. Indeed when microwave irradiated at 300W for 10 and 15minutes, 53.68 and 78.45% reduction were achieved. This indicates that microwave irradiation had caused oxidation by air in the oven cavity and results to formation of alkyl radicals and sulphoxide from sulphur compound in the petroleum. The prevailing sulphur found in the crude going by FT-IR results is sulphides which oxidized to sulphoxide or sulphones. It is clear that sulphur extraction with heptane is more efficient than microwave irradiation but economically due to demands for solvent and its industrial usage microwave irradiation can serve as alternative substitute for sulphur reduction in petroleum. Sulphur reduction by microwave radiation should be up- scaled from laboratory to a pilot plant without involving extraction column in the refining.

  4. The effect of refining step on the changes in viscosity values of vegetable oils

    International Nuclear Information System (INIS)

    Ergonul, P.G.

    2013-01-01

    In this work, the viscosity values of chemically refined vegetable oils (sunflower, corn, soybean and rapeseed) and physically refined vegetable oils (olive and palm) were determined during refining processes. At this point of view, fatty acid compositions and viscosity values of oil samples were determined. The edible vegetable oils presented Newtonian behavior in shear rates at ranges 6.28-20.93 s/sup -1/. It was observed that palm oil is more viscous than the others. During physical refining, the effect of both oil type and refining steps were significantly important, whereas in chemical refining only the effect of oil type was found statistically important (p<0.01). It was observed that correlation among fatty acid compositions and viscosity values of the samples showed differences according to oil type. (author)

  5. 19 CFR 151.47 - Optional entry of net quantity of petroleum or petroleum products.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Optional entry of net quantity of petroleum or petroleum products. 151.47 Section 151.47 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... Petroleum and Petroleum Products § 151.47 Optional entry of net quantity of petroleum or petroleum products...

  6. HFRR investigation of biobased and petroleum based oils

    Science.gov (United States)

    Biobased oils come in a wide range of chemical structures as do petroleum based oils. In addition, a distinct structural difference exists between these two broad categories of oils. Previous work has shown that, in spite of the structural differences, these two categories of oils display similar pr...

  7. Do we have to fear a forth petroleum crash?

    International Nuclear Information System (INIS)

    Jestin-Fleury, N.

    1998-01-01

    This paper analyses the worldwide energy scenarios for the forecasting of petroleum supply and demand in the year 2020: competition with natural gas industry, oil reserves, resources, production, development of new technologies, investments, fields development, drop of production costs, exploitation of tar sands, extra-heavy crudes, bituminous shales, reduction of the petroleum consumption in the transportation sector (development of LPG and electric powered vehicles, chemical conversion of natural gas, fuel cells), increase of the OPEC countries production, evolution of nuclear energy and economical impact of a serious fight against greenhouse gases emission and climate changes. (J.S.)

  8. Photoenhanced Toxicity of Petroleum to Aquatic Invertebrates and Fish

    Science.gov (United States)

    Photoenhanced toxicity is a distinct mechanism of petroleum toxicity that is mediated by the interaction of solar radiation with specific polycyclic aromatic compounds in oil. Phototoxicity is observed as a twofold to greater than 1000-fold increase in chemical toxicity to aquati...

  9. Environmental protection systems for the petroleum industry

    International Nuclear Information System (INIS)

    Lowe, G.B.

    1996-01-01

    The transportation of petroleum products and other chemicals can involve spillage and leaks despite being closely controlled. Human error in the loading of road tankers or consumers refuelling their vehicles at service stations can lead to spillage accidents. Seepage through permeable concrete and its expansion joints can occur for diesel underground tanks with serious environmental consequences. This article describes methods which could be adopted by the petroleum industry to prevent these accidental incidents from causing environmental pollution. Service station forecourts could be constructed, using precast concrete hexagonal blocks with dry sand between them and then have a coating of sealant to prevent spills from seeping into ground water. Secondary containment for underground tanks should be given an elastomeric membrane coating. (UK)

  10. Petroleum Refining and its Economic and Technological Impact for the Production of Gasoline in Mexico to 2030

    Directory of Open Access Journals (Sweden)

    Granados-Hernández Elías

    2013-10-01

    Full Text Available Gas imports in Mexico have increased in the last few years. Nowadays Mexico has no capacity to meet the demands of this fuel in the next twenty years. In this paper we analyze several oil refining projections that enable the oil supply in Mexico until year 2030, taking into consideration four types of refineries, processing the produc- tion of pure oils in the country, using four mixtures of the higher reserve, consider- ing an import to meet the demand of fuel and once met consider exportation. Modeling was carried out analyzing the volume of refined oil and the required in- vestment, based on the kind of refinery and on the processing units that characterize it. As it was mentioned before, there are different refining projections to meet the demand of gas, but considering that the main oil production in Mexico is heavy. The simulated projection with this type of oil would require a higher volume in the exis- tent refineries in the country to meet that demand. Besides, considering the kind of refinery (out of four, the volumes to refine will be less, if very complex refineries are used. However, the cost of investment in this technology would be higher, consider- ing that new refineries will be built in a near future to meet the fuel demands.

  11. Basic effects of pulp refining on fiber properties--a review.

    Science.gov (United States)

    Gharehkhani, Samira; Sadeghinezhad, Emad; Kazi, Salim Newaz; Yarmand, Hooman; Badarudin, Ahmad; Safaei, Mohammad Reza; Zubir, Mohd Nashrul Mohd

    2015-01-22

    The requirement for high quality pulps which are widely used in paper industries has increased the demand for pulp refining (beating) process. Pulp refining is a promising approach to improve the pulp quality by changing the fiber characteristics. The diversity of research on the effect of refining on fiber properties which is due to the different pulp sources, pulp consistency and refining equipment has interested us to provide a review on the studies over the last decade. In this article, the influence of pulp refining on structural properties i.e., fibrillations, fine formation, fiber length, fiber curl, crystallinity and distribution of surface chemical compositions is reviewed. The effect of pulp refining on electrokinetic properties of fiber e.g., surface and total charges of pulps is discussed. In addition, an overview of different refining theories, refiners as well as some tests for assessing the pulp refining is presented. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Refining prices and margins in 1998

    International Nuclear Information System (INIS)

    Favennec, J.P.; Baudoin, C.

    1999-01-01

    Despite a business environment that was globally mediocre due primarily to the Asian crisis and to a mild winter in the northern hemisphere, the signs of improvement noted in the refining activity in 1996 were borne out in 1997. But the situation is not yet satisfactory in this sector: the low return on invested capital and the financing of environmental protection expenditure are giving cause for concern. In 1998, the drop in crude oil prices and the concomitant fall in petroleum product prices was ultimately rather favorable to margins. Two elements tended to put a damper on this relative optimism. First of all, margins continue to be extremely volatile and, secondly, the worsening of the economic and financial crisis observed during the summer made for a sharp decline in margins in all geographic regions, especially Asia

  13. Interpreting residues of petroleum hydrocarbons in wildlife tissues

    International Nuclear Information System (INIS)

    Hall, R.J.; Coon, N.C.

    1988-08-01

    This report is the first publication in the field of environmental-contaminant effects on wildlife to tell the reader how to interpret the results of analytical chemical results. Specifically, the publication describes how to interpret residues of petroleum hydrocarbons in wildlife tissues. Pollutant oil residues in avian species are emphasized

  14. The hydrogen market in refining and petrochemicals in France

    International Nuclear Information System (INIS)

    Lutz, P.; Borel, P.

    1991-11-01

    The french hydrogen market on industrial sites can be divided into three main parts. Captive hydrogen is produced by thermofor catalytic reforming, catalytic cracking and hydrotreating of vacuum distillates, and is consumed in hydrotreating of petrol, hydrodesulfurization of gasoil and domestic fuel oil, hydrocracking and hydrofining of lubricants. By-product hydrogen is burnt in boilers and flare stacks. Merchant hydrogen is sold to users on the open market. Currently, thirteen refineries belonging to six companies produce 73 million tonnes of petroleum products each year in France and release annually a surplus of some 100,000 tonnes of hydrogen. The future of refining industry in France depends on the quality of the crude oil, the specific characteristics of the end products, and the developments in user markets. The refining process is likely to become more complex by 2005 with an increase in hydrogen requirements. Refineries could then undergo an annual deficit between 140,000 and 230,000 tonnes of hydrogen. The choice of the appropriate process to cover this shortfall depends mostly on oil companies strategy. (author). 1 fig., 3 tabs., 3 diagrams

  15. Panorama 2010: Refining: Adjusting to a changing business environment

    International Nuclear Information System (INIS)

    Silva, C.

    2010-01-01

    During the latter half of 2008, the sharp deterioration in the economic situation translated into a decline in world oil demand and, after a certain time lag, a collapse in refining margins. In 2009, this downtrend continued and was aggravated by the emergence of large amounts of surplus capacity. For one thing, the investment programs undertaken in recent years to cover growing demand for petroleum products cannot be discontinued in an abrupt manner. For another, the growth rate in 2009 was obviously flagging and inertia was strong, contributing to the accumulation of excess capacity. In the OECD countries, the current slump is expected to persist. In the medium term, a reorganization of the sector is anticipated, especially in Europe and in the United States: refining capacity will be scaled back and more stringent refinery emissions standards (SO 2 , CO 2 quota) and fuel specifications (sulfur content in bunker fuels) will be enforced. Projects will gravitate even more towards the regions of high-growth demand: the bulk of new capacity will be located in Asia. (author)

  16. Bioremediation of petroleum hydrocarbons in soil environments

    International Nuclear Information System (INIS)

    Rowell, M.J.; Ashworth, J.; Qureshi, A.A.

    1992-12-01

    The bioremediation of petroleum hydrocarbons in soil environments was reviewed via a literature survey and discussions with workers in relevant disciplines. The impacts of hydrocarbons on soil are discussed along with a range of methods available to assist in their decomposition by soil microorganisms. The range of petroleum-based materials considered includes conventional and synthetic crude oils, refined oils, sludges, asphalts and bitumens, drilling mud residues, creosote tars, and some pesticides. The degradability of hydrocarbons largely depends upon their aqueous solubility and their adsorption on soil surfaces and, therefore, is related to their molecular structures. The ease of decomposition decreases with increasing complexity of structure, in the order aliphatics > aromatics > heterocyclics and asphaltenes (most recalcitrant). Most soils contain an adequate population of microorganisms and hence bioaugmentation may only be needed in special circumstances. Decomposition is fastest in soils where the hydrocarbon loading rate, aeration, nutrition, moisture, and pH are all optimized. At spill sites there is little control over the application rate, although containment measures can assist in either limiting contamination or distributing it more evenly. The enhancement of bioremediation is discussed in light of all these factors. Other techniques such as enhanced aeration, hydrocarbon decomposition by anaerobic processes, surfactants, and burning are also discussed. 211 refs., 11 figs., 10 tabs

  17. Bioremediation of petroleum hydrocarbons in soil environments

    Energy Technology Data Exchange (ETDEWEB)

    Rowell, M J; Ashworth, J; Qureshi, A A

    1992-12-01

    The bioremediation of petroleum hydrocarbons in soil environments was reviewed via a literature survey and discussions with workers in relevant disciplines. The impacts of hydrocarbons on soil are discussed along with a range of methods available to assist in their decomposition by soil microorganisms. The range of petroleum-based materials considered includes conventional and synthetic crude oils, refined oils, sludges, asphalts and bitumens, drilling mud residues, creosote tars, and some pesticides. The degradability of hydrocarbons largely depends upon their aqueous solubility and their adsorption on soil surfaces and, therefore, is related to their molecular structures. The ease of decomposition decreases with increasing complexity of structure, in the order aliphatics > aromatics > heterocyclics and asphaltenes (most recalcitrant). Most soils contain an adequate population of microorganisms and hence bioaugmentation may only be needed in special circumstances. Decomposition is fastest in soils where the hydrocarbon loading rate, aeration, nutrition, moisture, and pH are all optimized. At spill sites there is little control over the application rate, although containment measures can assist in either limiting contamination or distributing it more evenly. The enhancement of bioremediation is discussed in light of all these factors. Other techniques such as enhanced aeration, hydrocarbon decomposition by anaerobic processes, surfactants, and burning are also discussed. 211 refs., 11 figs., 10 tabs.

  18. Business is business : China's petroleum companies come of age

    International Nuclear Information System (INIS)

    Gault, S.

    2006-01-01

    An overview of the Chinese oil and gas industry was presented. The Chinese oil and gas sector has undergone massive changes since the monolithic Chinese Ministry of Petroleum Industry (MPI) organized large-scale oil and gas projects in the form of massive campaigns during the revolutionary period. During the 1980s, the MPI was divided into 4 sectors: (1) the China National Petroleum Company (CNPC) which controlled exploration and production onshore; (2) the China National Offshore Oil Company; (3) Sinopec, which acquired control over refining processes; and (4) Sinochem, which was responsible for importing and exporting crude oil. Although many of the production units of these companies went public on the Shanghai and Shenzhen stock exchanges, the president of CNPC is still appointed by the State Council. China recognized that a fundamental overhaul of the industry would be necessary to withstand international competition after it applied for WTO membership in 2001. Various national oil companies were dismantled and core businesses were consolidated. Three vertically integrated oil companies emerged : PetroChina International; Sinopec; and CNOOOC Ltd. The Chinese government has maintained majority ownership in all cases, which has led to significant financial advantages for the 3 companies. The political imperative to maintain social stability has prevented China's government from lifting pricing controls on many refined products. A failed takeover bid of Unocal that failed has caused China to lose faith in America's commitment to free market principles. China began buying oil reserves in Alberta in 1992, and made a number of important acquisitions in 2005. China is now considering purchasing an equity stake in an oil sands project, but has had difficulties in finding Canadian partners. 1 fig

  19. Micro-encapsulation of refined olive oil: influence of capsule wall components and the addition of antioxidant additives on the shelf life and chemical alteration.

    Science.gov (United States)

    Calvo, Patricia; Castaño, Angel Luís; Lozano, Mercedes; González-Gómez, David

    2012-10-01

    Although refined olive oils (ROOs) exhibit lower quality and less stability toward thermal stress than extra-virgin olive oils, these types of oil are gaining importance in the food industry. The inclusion of ROOs in processed food may alter the oxidative stability of the manufactured products, and therefore having technological alternatives to increase oil stability will be an important achievement. For this reason the main goal of this study was to assess the influence of the micro-encapsulation process on the ROO chemical composition and its oxidative stability. Factors such as microcapsule wall constituents and the addition of the antioxidant butyl hydroxytoluene were investigated in order to establish the most appropriate conditions to ensure no alteration of the refined olive oil chemical characteristics. The optimised methodology exhibited high encapsulation yield (>98%), with micro-encapsulation efficiency ranging from 35 to 69% according to the nature of the wall components. The encapsulation process slightly altered the chemical composition of the olive oil and protected the oxidative stability for at least 11 months when protein components were included as wall components. It was concluded that the presence of proteins constituents in the microcapsule wall material extended the shelf life of the micro-encapsulated olive oil regardless the use of antioxidant additives. Copyright © 2012 Society of Chemical Industry.

  20. Investigation on the fates of vanadium and nickel during co-gasification of petroleum coke with biomass.

    Science.gov (United States)

    Li, Jiazhou; Wang, Xiaoyu; Wang, Bing; Zhao, Jiantao; Fang, Yitian

    2018-06-01

    This study investigates the volatilization behaviors and mineral transformation of vanadium and nickel during co-gasification of petroleum coke with biomass. Moreover, the evolution of occurrence modes of vanadium and nickel was also determined by the method of sequential chemical extraction. The results show that the volatilities of vanadium and nickel in petroleum coke have a certain level of growth with an increase in the temperature. With the addition of biomass, their volatilities both show an obvious decrease. Organic matter and stable forms are the dominant chemical forms of vanadium and nickel. After gasification, organic-bound vanadium and nickel decompose completely and convert into other chemical forms. The crystalline phases of vanadium trioxide, coulsonite, nickel sulfide, and elemental nickel are clearly present in petroleum coke and biomass gasification ashes. When the addition of biomass reaches 60 wt%, the diffraction peaks of orthovanadate are found while that of vanadium trioxide disappear. Copyright © 2018 Elsevier Ltd. All rights reserved.