Assessment of Student Music Performances Using Deep Neural Networks

Directory of Open Access Journals (Sweden)

Kumar Ashis Pati

2018-03-01

Full Text Available Music performance assessment is a highly subjective task often relying on experts to gauge both the technical and aesthetic aspects of the performance from the audio signal. This article explores the task of building computational models for music performance assessment, i.e., analyzing an audio recording of a performance and rating it along several criteria such as musicality, note accuracy, etc. Much of the earlier work in this area has been centered around using hand-crafted features intended to capture relevant aspects of a performance. However, such features are based on our limited understanding of music perception and may not be optimal. In this article, we propose using Deep Neural Networks (DNNs for the task and compare their performance against a baseline model using standard and hand-crafted features. We show that, using input representations at different levels of abstraction, DNNs can outperform the baseline models across all assessment criteria. In addition, we use model analysis techniques to further explain the model predictions in an attempt to gain useful insights into the assessment process. The results demonstrate the potential of using supervised feature learning techniques to better characterize music performances.

The Waste Isolation Pilot Plant Performance Assessment Program

International Nuclear Information System (INIS)

Myers, J.; Coons, W.E.; Eastmond, R.; Morse, J.; Chakrabarti, S.; Zurkoff, J.; Colton, I.D.; Banz, I.

1986-01-01

The Waste Isolation Pilot Plant (WIPP) Performance Assessment Program involves a comprehensive analysis of the WIPP project with respect to the recently finalized Environmental Protection Agency regulations regarding the long-term geologic isolation of radioactive wastes. The performance assessment brings together the results of site characterization, underground experimental, and environmental studies into a rigorous determination of the performance of WIPP as a disposal system for transuranic radioactive waste. The Program consists of scenario development, geochemical, hydrologic, and thermomechanical support analyses and will address the specific containment and individual protection requirements specified in 40 CFR 191 sub-part B. Calculated releases from these interrelated analyses will be reported as an overall probability distribution of cumulative release resulting from all processes and events occurring over the 10,000 year post-closure period. In addition, results will include any doses to the public resulting from natural processes occurring over the 1,000 year post-closure period. The overall plan for the WIPP Performance Assessment Program is presented along with approaches to issues specific to the WIPP project

Comparative diagnostic performance of multidetector computed tomography and MRI for characterization of pancreatic cystic lesions

International Nuclear Information System (INIS)

Moon, Sung Min; Shin, Sang Soo; Park, Jin Gyoon; Jeong, Yong Yeon

2015-01-01

To compare the diagnostic performance of multidetector computed tomography (MDCT) and magnetic resonance imaging (MRI) in characterization of pancreatic cystic lesions. We conducted a retrospective study on 34 patients with histopathologically proven cystic pancreatic lesions who underwent both preoperative MDCT and MRI. CT and MRI were independently evaluated for differentiating mucinous vs. non-mucinous lesions, differentiating aggressive vs. non-aggressive lesion, analyzing morphological features, and evaluating specific leading diagnoses. Sensitivity, specificity, and accuracy were determined. Competency assessment of lesional morphology analysis was performed using the kappa values of the 2 tests. The sensitivity, specificity, and accuracy of MRI for differentiating mucinous vs. non-mucinous lesions were higher than CT (p = 0.03). For differentiating aggressiveness, the sensitivity of MRI was better than CT, but the specificity of CT was better than MRI. In evaluation of morphologic features, MRI showed better performance in characterization of septa and wall. Otherwise, the 2 modalities showed similarly good performance. MRI was better than CT in determining a specific diagnosis (58.8% vs. 47.2%, respectively). CT and MRI are reasonable diagnostic methods for characterization of pancreatic cystic lesions. However, MRI enables more confident assessment than CT in differentiating mucinous vs. non-mucinous lesions and characterization of the septa and wall

Use of Historical Pump-and-Treat Data to Enhance Site Characterization and Remediation Performance Assessment.

Science.gov (United States)

Brusseau, Mark L

2013-10-01

Groundwater withdrawal and contaminant concentration data are routinely collected for pump-and-treat operations conducted at hazardous waste sites. These data sets can be mined to produce a wealth of information to support enhanced site characterization, optimization of remedial system operations, and improved decision making regarding long-term site management and closure. Methods that may be used to analyze and interpret pump-and-treat data to produce such assessments are presented, along with a brief illustration of their application to a site. The results presented herein illustrate that comprehensive analysis of pump-and-treat data is a powerful, cost-effective method for providing higher-resolution, value-added characterization of contaminated sites.

Characterizing the performance of the Conway-Maxwell Poisson generalized linear model.

Science.gov (United States)

Francis, Royce A; Geedipally, Srinivas Reddy; Guikema, Seth D; Dhavala, Soma Sekhar; Lord, Dominique; LaRocca, Sarah

2012-01-01

Count data are pervasive in many areas of risk analysis; deaths, adverse health outcomes, infrastructure system failures, and traffic accidents are all recorded as count events, for example. Risk analysts often wish to estimate the probability distribution for the number of discrete events as part of doing a risk assessment. Traditional count data regression models of the type often used in risk assessment for this problem suffer from limitations due to the assumed variance structure. A more flexible model based on the Conway-Maxwell Poisson (COM-Poisson) distribution was recently proposed, a model that has the potential to overcome the limitations of the traditional model. However, the statistical performance of this new model has not yet been fully characterized. This article assesses the performance of a maximum likelihood estimation method for fitting the COM-Poisson generalized linear model (GLM). The objectives of this article are to (1) characterize the parameter estimation accuracy of the MLE implementation of the COM-Poisson GLM, and (2) estimate the prediction accuracy of the COM-Poisson GLM using simulated data sets. The results of the study indicate that the COM-Poisson GLM is flexible enough to model under-, equi-, and overdispersed data sets with different sample mean values. The results also show that the COM-Poisson GLM yields accurate parameter estimates. The COM-Poisson GLM provides a promising and flexible approach for performing count data regression. © 2011 Society for Risk Analysis.

Performance Demonstration Program Plan for the WIPP Experimental-Waste Characterization Program

International Nuclear Information System (INIS)

1991-02-01

The Performance Demonstration Program is designed to ensure that compliance with the Quality Assurance Objective, identified in the Quality Assurance Program Plan for the WIPP Experimental-Waste Characterization Program (QAPP), is achieved. This Program Plan is intended for use by the WPO to assess the laboratory support provided for the characterization of WIPP TRU waste by the storage/generator sites. Phase 0 of the Performance Demonstration Program encompasses the analysis of headspace gas samples for inorganic and organic components. The WPO will ensure the implementation of this plan by designating an independent organization to coordinate and provide technical oversight for the program (Program Coordinator). Initial program support, regarding the technical oversight and coordination functions, shall be provided by the USEPA-ORP. This plan identifies the criteria that will be used for the evaluation of laboratory performance, the responsibilities of the Program Coordinator, and the responsibilities of the participating laboratories. 5 tabs

Characterizing and Measuring Maliciousness for Cybersecurity Risk Assessment

Directory of Open Access Journals (Sweden)

Zoe M. King

2018-02-01

Full Text Available Cyber attacks have been increasingly detrimental to networks, systems, and users, and are increasing in number and severity globally. To better predict system vulnerabilities, cybersecurity researchers are developing new and more holistic approaches to characterizing cybersecurity system risk. The process must include characterizing the human factors that contribute to cyber security vulnerabilities and risk. Rationality, expertise, and maliciousness are key human characteristics influencing cyber risk within this context, yet maliciousness is poorly characterized in the literature. There is a clear absence of literature pertaining to human factor maliciousness as it relates to cybersecurity and only limited literature relating to aspects of maliciousness in other disciplinary literatures, such as psychology, sociology, and law. In an attempt to characterize human factors as a contribution to cybersecurity risk, the Cybersecurity Collaborative Research Alliance (CSec-CRA has developed a Human Factors risk framework. This framework identifies the characteristics of an attacker, user, or defender, all of whom may be adding to or mitigating against cyber risk. The maliciousness literature and the proposed maliciousness assessment metrics are discussed within the context of the Human Factors Framework and Ontology. Maliciousness is defined as the intent to harm. Most maliciousness cyber research to date has focused on detecting malicious software but fails to analyze an individual’s intent to do harm to others by deploying malware or performing malicious attacks. Recent efforts to identify malicious human behavior as it relates to cybersecurity, include analyzing motives driving insider threats as well as user profiling analyses. However, cyber-related maliciousness is neither well-studied nor is it well understood because individuals are not forced to expose their true selves to others while performing malicious attacks. Given the difficulty of

Characterizing and Measuring Maliciousness for Cybersecurity Risk Assessment.

Science.gov (United States)

King, Zoe M; Henshel, Diane S; Flora, Liberty; Cains, Mariana G; Hoffman, Blaine; Sample, Char

2018-01-01

Cyber attacks have been increasingly detrimental to networks, systems, and users, and are increasing in number and severity globally. To better predict system vulnerabilities, cybersecurity researchers are developing new and more holistic approaches to characterizing cybersecurity system risk. The process must include characterizing the human factors that contribute to cyber security vulnerabilities and risk. Rationality, expertise, and maliciousness are key human characteristics influencing cyber risk within this context, yet maliciousness is poorly characterized in the literature. There is a clear absence of literature pertaining to human factor maliciousness as it relates to cybersecurity and only limited literature relating to aspects of maliciousness in other disciplinary literatures, such as psychology, sociology, and law. In an attempt to characterize human factors as a contribution to cybersecurity risk, the Cybersecurity Collaborative Research Alliance (CSec-CRA) has developed a Human Factors risk framework. This framework identifies the characteristics of an attacker, user, or defender, all of whom may be adding to or mitigating against cyber risk. The maliciousness literature and the proposed maliciousness assessment metrics are discussed within the context of the Human Factors Framework and Ontology. Maliciousness is defined as the intent to harm. Most maliciousness cyber research to date has focused on detecting malicious software but fails to analyze an individual's intent to do harm to others by deploying malware or performing malicious attacks. Recent efforts to identify malicious human behavior as it relates to cybersecurity, include analyzing motives driving insider threats as well as user profiling analyses. However, cyber-related maliciousness is neither well-studied nor is it well understood because individuals are not forced to expose their true selves to others while performing malicious attacks. Given the difficulty of interviewing malicious

Characterizing and Measuring Maliciousness for Cybersecurity Risk Assessment

Science.gov (United States)

King, Zoe M.; Henshel, Diane S.; Flora, Liberty; Cains, Mariana G.; Hoffman, Blaine; Sample, Char

2018-01-01

Cyber attacks have been increasingly detrimental to networks, systems, and users, and are increasing in number and severity globally. To better predict system vulnerabilities, cybersecurity researchers are developing new and more holistic approaches to characterizing cybersecurity system risk. The process must include characterizing the human factors that contribute to cyber security vulnerabilities and risk. Rationality, expertise, and maliciousness are key human characteristics influencing cyber risk within this context, yet maliciousness is poorly characterized in the literature. There is a clear absence of literature pertaining to human factor maliciousness as it relates to cybersecurity and only limited literature relating to aspects of maliciousness in other disciplinary literatures, such as psychology, sociology, and law. In an attempt to characterize human factors as a contribution to cybersecurity risk, the Cybersecurity Collaborative Research Alliance (CSec-CRA) has developed a Human Factors risk framework. This framework identifies the characteristics of an attacker, user, or defender, all of whom may be adding to or mitigating against cyber risk. The maliciousness literature and the proposed maliciousness assessment metrics are discussed within the context of the Human Factors Framework and Ontology. Maliciousness is defined as the intent to harm. Most maliciousness cyber research to date has focused on detecting malicious software but fails to analyze an individual’s intent to do harm to others by deploying malware or performing malicious attacks. Recent efforts to identify malicious human behavior as it relates to cybersecurity, include analyzing motives driving insider threats as well as user profiling analyses. However, cyber-related maliciousness is neither well-studied nor is it well understood because individuals are not forced to expose their true selves to others while performing malicious attacks. Given the difficulty of interviewing

Using performance assessment for radioactive waste disposal decision making -- implementation of the methodology into the third performance assessment iteration of the Greater Confinement Disposal site

International Nuclear Information System (INIS)

Gallegos, D.P.; Conrad, S.H.; Baer, T.A.

1993-01-01

The US Department of Energy is responsible for the disposal of a variety of radioactive wastes. Some of these wastes are prohibited from shallow land burial and also do not meet the waste acceptance criteria for proposed waste repositories at the Waste Isolation Pilot Plant (WIPP) and Yucca Mountain. These have been termed ''special-case'' waste and require an alternative disposal method. From 1984 to 1989, the Department of Energy disposed of a small quantity of special-case transuranic wastes at the Greater Confinement Disposal (GCD) site at the Nevada Test Site. In this paper, an iterative performance assessment is demonstrated as a useful decision making tool in the overall compliance assessment process for waste disposal. The GCD site has been used as the real-site implementation and test of the performance assessment approach. Through the first two performance assessment iterations for the GCD site, and the transition into the third, we demonstrate how the performance assessment methodology uses probabilistic risk concepts to guide affective decisions about site characterization activities and how it can be used as a powerful tool in bringing compliance decisions to closure

Identifying best existing practice for characterization modeling in life cycle impact assessment

DEFF Research Database (Denmark)

Hauschild, Michael Zwicky; Goedkoop, Mark; Guinée, Jeroen

2013-01-01

Purpose: Life cycle impact assessment (LCIA) is a field of active development. The last decade has seen prolific publication of new impact assessment methods covering many different impact categories and providing characterization factors that often deviate from each other for the same substance...... and impact. The LCA standard ISO 14044 is rather general and unspecific in its requirements and offers little help to the LCA practitioner who needs to make a choice. With the aim to identify the best among existing characterization models and provide recommendations to the LCA practitioner, a study...... was performed for the Joint Research Centre of the European Commission (JRC). Methods Existing LCIA methods were collected and their individual characterization models identified at both midpoint and endpoint levels and supplemented with other environmental models of potential use for LCIA. No new developments...

Process of performance assessment

International Nuclear Information System (INIS)

King, C.M.; Halford, D.K.

1987-01-01

Performance assessment is the process used to evaluate the environmental consequences of disposal of radioactive waste in the biosphere. An introductory review of the subject is presented. Emphasis is placed on the process of performance assessment from the standpoint of defining the process. Performance assessment, from evolving experience at DOE sites, has short-term and long-term subprograms, the components of which are discussed. The role of mathematical modeling in performance assessment is addressed including the pros and cons of current approaches. Finally, the system/site/technology issues as the focal point of this symposium are reviewed

MODERN APPROACHES REGARDING THE ASSESSMENT OF THE COMPANY’S OVERALL PERFORMANCES

Directory of Open Access Journals (Sweden)

Pintea Mirela-Oana

2010-07-01

Full Text Available The importance of this research can be supported by ambitious goals that are attributed to performance measurement / assessment of a company such as: improving company performance, optimization of company’s management and motivating staff. In the current context of sustainable development, the performance definition, measurement and maximizing system of companies becomes a complex one. The modern business environment demands a multi-goal orientation. Profit theory is no longer a valid measure of organizational performance and neither are other approaches that only take the interests of shareholders (owners of a company into account. Today’s business environment is characterized by the increasing importance and strength of various stakeholder groups. This paper captures the current mutations brought on the line of developing a modern system of assessment of company’s performance.

Performance assessment techniques for groundwater recovery and treatment systems

Energy Technology Data Exchange (ETDEWEB)

Kirkpatrick, G.L. [Environmental Resources Management, Inc., Exton, PA (United States)

1993-03-01

Groundwater recovery and treatment (pump and treat systems) continue to be the most commonly selected remedial technology for groundwater restoration and protection programs at hazardous waste sites and RCRA facilities nationwide. Implementing a typical groundwater recovery and treatment system includes the initial assessment of groundwater quality, characterizing aquifer hydrodynamics, recovery system design, system installation, testing, permitting, and operation and maintenance. This paper focuses on methods used to assess the long-term efficiency of a pump and treat system. Regulatory agencies and industry alike are sensitive to the need for accurate assessment of the performance and success of groundwater recovery systems for contaminant plume abatement and aquifer restoration. Several assessment methods are available to measure the long-term performance of a groundwater recovery system. This paper presents six assessment techniques: degree of compliance with regulatory agency agreement (Consent Order of Record of Decision), hydraulic demonstration of system performance, contaminant mass recovery calculation, system design and performance comparison, statistical evaluation of groundwater quality and preferably, integration of the assessment methods. Applying specific recovery system assessment methods depends upon the type, amount, and quality of data available. Use of an integrated approach is encouraged to evaluate the success of a groundwater recovery and treatment system. The methods presented in this paper are for engineers and corporate management to use when discussing the effectiveness of groundwater remediation systems with their environmental consultant. In addition, an independent (third party) system evaluation is recommended to be sure that a recovery system operates efficiently and with minimum expense.

The Effects of Performance-Based Assessment Criteria on Student Performance and Self-Assessment Skills

Science.gov (United States)

Fastre, Greet Mia Jos; van der Klink, Marcel R.; van Merrienboer, Jeroen J. G.

2010-01-01

This study investigated the effect of performance-based versus competence-based assessment criteria on task performance and self-assessment skills among 39 novice secondary vocational education students in the domain of nursing and care. In a performance-based assessment group students are provided with a preset list of performance-based…

A formalism to generate probability distributions for performance-assessment modeling

International Nuclear Information System (INIS)

Kaplan, P.G.

1990-01-01

A formalism is presented for generating probability distributions of parameters used in performance-assessment modeling. The formalism is used when data are either sparse or nonexistent. The appropriate distribution is a function of the known or estimated constraints and is chosen to maximize a quantity known as Shannon's informational entropy. The formalism is applied to a parameter used in performance-assessment modeling. The functional form of the model that defines the parameter, data from the actual field site, and natural analog data are analyzed to estimate the constraints. A beta probability distribution of the example parameter is generated after finding four constraints. As an example of how the formalism is applied to the site characterization studies of Yucca Mountain, the distribution is generated for an input parameter in a performance-assessment model currently used to estimate compliance with disposal of high-level radioactive waste in geologic repositories, 10 CFR 60.113(a)(2), commonly known as the ground water travel time criterion. 8 refs., 2 figs

24 CFR 115.206 - Performance assessments; Performance standards.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Performance assessments; Performance standards. 115.206 Section 115.206 Housing and Urban Development Regulations Relating to Housing... AGENCIES Certification of Substantially Equivalent Agencies § 115.206 Performance assessments; Performance...

Regulatory compliance for a Yucca Mountain Repository: A performance assessment perspective

International Nuclear Information System (INIS)

Dyer, J.R.; Van Luik, A.E.; Gil, A.V.; Brocoum, S.J.

1997-01-01

The U.S. Department of Energy's Yucca Mountain Site Characterization Project is scheduled to submit a License Application in the year 2002. The License Application is to show compliance with the regulations promulgated by the U.S. Nuclear Regulatory Commission which implement standards promulgated by the U.S. Environmental Protection Agency. These standards are being revised, and it is not certain what their exact nature will be in term of either the performance measure(s) or the time frames that are to be addressed. This paper provides some insights pertaining to this regulatory history, an update on Yucca Mountain performance assessments, and a Yucca Mountain Site Characterization Project perspective on proper standards based on Project experience in performance assessment for its proposed Yucca Mountain Repository system. The Project's performance assessment based perspective on a proper standard applicable to Yucca Mountain may be summarized as follows: a proper standard should be straight forward and understandable; should be consistent with other standards and regulations; and should require a degree of proof that is scientifically supportable in a licensing setting. A proper standard should have several attributes: (1) propose a reasonable risk level as its basis, whatever the quantitative performance measure is chosen to be, (2) state a definite regulatory time frame for showing compliance with quantitative requirements, (3) explicitly recognize that the compliance calculations are not predictions of actual future risks, (4) define the biosphere to which risk needs to be calculated in such a way as to constrain potentially endless speculation about future societies and future human actions, and (5) have as its only quantitative requirement the risk limit (or surrogate performance measure keyed to risk) for the total system

Organizational Performance Assessment: Overview of Publications in National Journals

Directory of Open Access Journals (Sweden)

Sandra Mara Iesbik Valmorbida

2012-12-01

Full Text Available In the literature there are several tools that aim to assess organizational performance, such as Balanced Scorecard (BSC, National Quality Award (PNQ, Multicriteria Methodology for Decision Aiding (MCDA, Data envelopment analysis (DEA, Analytic Hierarchy Process (AHP, among others. However, it is perceived in practice doubts as to choose the most appropriate for each organizational context. In this sense, it is argued that to measure the performance of the organization it is necessary that this measure is based on an instrument that allows transparency in the evaluation form, and insert those interested in the evaluation process. The credibility of an evaluation therefore depends on the ability to produce consistent information for all subjects involved in the intervention. The search for tools to improve the way to evaluate organizational performance it is increasingly necessary. The objective of this study is to identify the main tools of organizational performance assessment published in national journals in the area of Administration, Accounting and Tourism, classified by CAPES Qualis A1 to B5. The study is characterized as descriptive and qualitative documentation. We analyzed 489 articles, which resulted in the following results:(i identified the main theme of the authors and regular assessment of organizational performance, (ii from the year 2000 publications on the subject grew substantially, (iii Data Envelopment Analysis (DEA, Balanced Scorecard (BSC and Multicriteria for decision aiding methodology(MCDA-C are the most commonly used tools for evaluating performance, (iv most of the tools found in the literature are multiple criteria, (v described the process used by the tools to assess organizational performance.

Conceptual, experimental and computational approaches to support performance assessment of hydrology and chemical transport at Yucca Mountain; Yucca Mountain Site Characterization Project

Energy Technology Data Exchange (ETDEWEB)

Narasimhan, T.N.; Wang, J.S.Y. [Lawrence Berkeley Lab., CA (United States)

1992-07-01

The authors of this report have been participating in the Sandia National Laboratory`s hydrologic performance assessment of the Yucca Mountain, Nevada, since 1983. The scope of this work is restricted to the unsaturated zone at Yucca Mountain and to technical questions about hydrology and chemical transport. The issues defined here are not to be confused with the elaborate hierarchy of issues that forms the framework of the US Department of Energy plans for characterizing the site (DOE, 1989). The overall task of hydrologic performance assessment involves issues related to hydrology, geochemistry, and energy transport in a highly heterogeneous natural geologic system which will be perturbed in a major way by the disposal activity. Therefore, a rational evaluation of the performance assessment issues must be based on an integrated appreciation of the aforesaid interacting processes. Accordingly, a hierarchical approach is taken in this report, proceeding from the statement of the broad features of the site that make it the site for intensive studies and the rationale for disposal strategy, through the statement of the fundamental questions that need to be answered, to the identification of the issues that need resolution. Having identified the questions and issues, the report then outlines the tasks to be undertaken to resolve the issues. The report consists essentially of two parts. The first part deals with the definition of issues summarized above. The second part summarizes the findings of the authors between 1983 and 1989 under the activities of the former Nevada Nuclear Waste Storage Investigations (NNWSI) and the current YMP.

Obtaining reasonable assurance on geochemical aspects of performance assessment of deep geologic repositories

International Nuclear Information System (INIS)

Van Luik, A.E.; Serne, R.J.

1986-01-01

Providing reasonable assurance that a deep geologic disposal system will perform as required by regulation involves, in part, the building of confidence by providing a sound scientific basis for the site characterization, engineered system design, and system performance modeling efforts. Geochemistry plays a role in each of these activities. Site characterization must result in a description of the in situ geochemical environment that will support the design of the engineered system and the modeling of the transport of specific radionuclides to the accessible environment. Judging the adequacy of this site characterization effort is a major aspect of providing reasonable assurance. Within site characterization, there are a number of geochemical issues that need to be addressed such as the usefulness of natural analog studies, and assessing the very long-term stability of the site geochemistry, given expected temperature and radiation conditions

Self-assessed performance improves statistical fusion of image labels

Energy Technology Data Exchange (ETDEWEB)

Bryan, Frederick W., E-mail: frederick.w.bryan@vanderbilt.edu; Xu, Zhoubing; Asman, Andrew J.; Allen, Wade M. [Electrical Engineering, Vanderbilt University, Nashville, Tennessee 37235 (United States); Reich, Daniel S. [Translational Neuroradiology Unit, National Institute of Neurological Disorders and Stroke, National Institutes of Health, Bethesda, Maryland 20892 (United States); Landman, Bennett A. [Electrical Engineering, Vanderbilt University, Nashville, Tennessee 37235 (United States); Biomedical Engineering, Vanderbilt University, Nashville, Tennessee 37235 (United States); and Radiology and Radiological Sciences, Vanderbilt University, Nashville, Tennessee 37235 (United States)

2014-03-15

. Statistical fusion resulted in statistically indistinguishable performance from self-assessed weighted voting. The authors developed a new theoretical basis for using self-assessed performance in the framework of statistical fusion and demonstrated that the combined sources of information (both statistical assessment and self-assessment) yielded statistically significant improvement over the methods considered separately. Conclusions: The authors present the first systematic characterization of self-assessed performance in manual labeling. The authors demonstrate that self-assessment and statistical fusion yield similar, but complementary, benefits for label fusion. Finally, the authors present a new theoretical basis for combining self-assessments with statistical label fusion.

Self-assessed performance improves statistical fusion of image labels

International Nuclear Information System (INIS)

Bryan, Frederick W.; Xu, Zhoubing; Asman, Andrew J.; Allen, Wade M.; Reich, Daniel S.; Landman, Bennett A.

2014-01-01

. Statistical fusion resulted in statistically indistinguishable performance from self-assessed weighted voting. The authors developed a new theoretical basis for using self-assessed performance in the framework of statistical fusion and demonstrated that the combined sources of information (both statistical assessment and self-assessment) yielded statistically significant improvement over the methods considered separately. Conclusions: The authors present the first systematic characterization of self-assessed performance in manual labeling. The authors demonstrate that self-assessment and statistical fusion yield similar, but complementary, benefits for label fusion. Finally, the authors present a new theoretical basis for combining self-assessments with statistical label fusion

A systematic method for characterizing the time-range performance of ground penetrating radar

International Nuclear Information System (INIS)

Strange, A D

2013-01-01

The fundamental performance of ground penetrating radar (GPR) is linked to the ability to measure the signal time-of-flight in order to provide an accurate radar-to-target range estimate. Having knowledge of the actual time range and timing nonlinearities of a trace is therefore important when seeking to make quantitative range estimates. However, very few practical methods have been formally reported in the literature to characterize GPR time-range performance. This paper describes a method to accurately measure the true time range of a GPR to provide a quantitative assessment of the timing system performance and detect and quantify the effects of timing nonlinearity due to timing jitter. The effect of varying the number of samples per trace on the true time range has also been investigated and recommendations on how to minimize the effects of timing errors are described. The approach has been practically applied to characterize the timing performance of two commercial GPR systems. The importance of the method is that it provides the GPR community with a practical method to readily characterize the underlying accuracy of GPR systems. This in turn leads to enhanced target depth estimation as well as facilitating the accuracy of more sophisticated GPR signal processing methods. (paper)

The process of performance assessment

International Nuclear Information System (INIS)

King, C.M.; Halford, D.K.

1986-01-01

An introductory review of the subject of ''Performance Assessment'' will be presented. Emphasis will be placed on the process of performance assessment from the standpoint of defining the process. Performance assessment, from evolving experience at DOE sites, has short-term and long-term subprograms, the components of which will be discussed. The role of mathematical modeling in performance assessment will be addressed including the pros and cons of current approaches. Finally, the ''system/site/technology'' issues as the focal point of this symposium will be reviewed

Total System Performance Assessment, 1993: An evaluation of the potential Yucca Mountain repository

International Nuclear Information System (INIS)

Andrews, R.W.; Dale, T.F.; McNeish, J.A.

1994-03-01

Total System Performance Assessments are an important component in the evaluation of the suitability of Yucca Mountain, Nevada as a potential site for a mined geologic repository for the permanent disposal of high-level radioactive wastes in the United States. The Total System Performance Assessments are conducted iteratively during site characterization to identify issues which should be addressed by the characterization and design activities as well as providing input to regulatory/licensing and programmatic decisions. During fiscal years 1991 and 1992, the first iteration of Total System Performance Assessment (hereafter referred to as TSPA 1991) was completed by Sandia National Laboratories and Pacific Northwest Laboratory. Beginning in fiscal year 1993, the Civilian Radioactive Waste Management System Management and Operating Contractor was assigned the responsibility to plan, coordinate, and contribute to the second iteration of Total System Performance Assessment (hereafter referred to as TSPA 1993). This document presents the objectives, approach, assumptions, input, results, conclusions, and recommendations associated with the Management and Operating Contractor contribution to TSPA 1993. The new information incorporated in TSPA 1993 includes (1) revised estimates of radionuclide solubilities (and their thermal and geochemical dependency), (2) thermal and geochemical dependency of spent fuel waste alteration and glass dissolution rates, (3) new distribution coefficient (k d ) estimates, (4) revised estimates of gas-phase velocities and travel times, and (5) revised hydrologic modeling of the saturated zone which provides updated estimates of the advective flux through the saturated zone

Total System Performance Assessment, 1993: An evaluation of the potential Yucca Mountain repository

Energy Technology Data Exchange (ETDEWEB)

Andrews, R.W.; Dale, T.F.; McNeish, J.A.

1994-03-01

Total System Performance Assessments are an important component in the evaluation of the suitability of Yucca Mountain, Nevada as a potential site for a mined geologic repository for the permanent disposal of high-level radioactive wastes in the United States. The Total System Performance Assessments are conducted iteratively during site characterization to identify issues which should be addressed by the characterization and design activities as well as providing input to regulatory/licensing and programmatic decisions. During fiscal years 1991 and 1992, the first iteration of Total System Performance Assessment (hereafter referred to as TSPA 1991) was completed by Sandia National Laboratories and Pacific Northwest Laboratory. Beginning in fiscal year 1993, the Civilian Radioactive Waste Management System Management and Operating Contractor was assigned the responsibility to plan, coordinate, and contribute to the second iteration of Total System Performance Assessment (hereafter referred to as TSPA 1993). This document presents the objectives, approach, assumptions, input, results, conclusions, and recommendations associated with the Management and Operating Contractor contribution to TSPA 1993. The new information incorporated in TSPA 1993 includes (1) revised estimates of radionuclide solubilities (and their thermal and geochemical dependency), (2) thermal and geochemical dependency of spent fuel waste alteration and glass dissolution rates, (3) new distribution coefficient (k{sub d}) estimates, (4) revised estimates of gas-phase velocities and travel times, and (5) revised hydrologic modeling of the saturated zone which provides updated estimates of the advective flux through the saturated zone.

Technology Performance Level Assessment Methodology.

Energy Technology Data Exchange (ETDEWEB)

Roberts, Jesse D.; Bull, Diana L; Malins, Robert Joseph; Costello, Ronan Patrick; Aurelien Babarit; Kim Nielsen; Claudio Bittencourt Ferreira; Ben Kennedy; Kathryn Dykes; Jochem Weber

2017-04-01

The technology performance level (TPL) assessments can be applied at all technology development stages and associated technology readiness levels (TRLs). Even, and particularly, at low TRLs the TPL assessment is very effective as it, holistically, considers a wide range of WEC attributes that determine the techno-economic performance potential of the WEC farm when fully developed for commercial operation. The TPL assessment also highlights potential showstoppers at the earliest possible stage of the WEC technology development. Hence, the TPL assessment identifies the technology independent “performance requirements.” In order to achieve a successful solution, the entirety of the performance requirements within the TPL must be considered because, in the end, all the stakeholder needs must be achieved. The basis for performing a TPL assessment comes from the information provided in a dedicated format, the Technical Submission Form (TSF). The TSF requests information from the WEC developer that is required to answer the questions posed in the TPL assessment document.

Radionuclide release rates from spent fuel for performance assessment modeling

International Nuclear Information System (INIS)

Curtis, D.B.

1994-01-01

In a scenario of aqueous transport from a high-level radioactive waste repository, the concentration of radionuclides in water in contact with the waste constitutes the source term for transport models, and as such represents a fundamental component of all performance assessment models. Many laboratory experiments have been done to characterize release rates and understand processes influencing radionuclide release rates from irradiated nuclear fuel. Natural analogues of these waste forms have been studied to obtain information regarding the long-term stability of potential waste forms in complex natural systems. This information from diverse sources must be brought together to develop and defend methods used to define source terms for performance assessment models. In this manuscript examples of measures of radionuclide release rates from spent nuclear fuel or analogues of nuclear fuel are presented. Each example represents a very different approach to obtaining a numerical measure and each has its limitations. There is no way to obtain an unambiguous measure of this or any parameter used in performance assessment codes for evaluating the effects of processes operative over many millennia. The examples are intended to suggest by example that in the absence of the ability to evaluate accuracy and precision, consistency of a broadly based set of data can be used as circumstantial evidence to defend the choice of parameters used in performance assessments

Total System Performance Assessment for the Site Recommendation

Energy Technology Data Exchange (ETDEWEB)

None

2000-10-02

As mandated in the Nuclear Waste Policy Act of 1982, the U.S. Department of Energy (DOE) has been investigating a candidate site at Yucca Mountain, Nevada, to determine whether it is suitable for development of the nation's first repository for permanent geologic disposal of spent nuclear fuel (SNF) and high-level radioactive waste (HLW). The Nuclear Waste Policy Amendments Act of 1987 directed that only Yucca Mountain be characterized to evaluate the site's suitability. Three main components of the DOE site characterization program are testing, design, and performance assessment. These program components consist of: Investigation of natural features and processes by analyzing data collected from field tests conducted above and below ground and from laboratory tests of rock, gas, and water samples Design of a repository and waste packages tailored to the site features, supported by laboratory testing of candidate materials for waste packages and design related testing in the underground tunnels where waste would be emplaced Quantitative estimates of the performance of the total repository system, over a range of possible conditions and for different repository configurations, by means of computer modeling techniques that are based on site and materials testing data and accepted principles of physics and chemistry. To date, DOE has completed and documented four major iterations of total system performance assessment (TSPA) for the Yucca Mountain site: TSPA-91 (Barnard et al. 1992), TSPA-93 (Wilson et al. 1994; CRWMS M and O 1994), TSPA-95 (CRWMS M and O 1995), and the Total System Performance Assessment-Viability Assessment (TSPA-VA) (DOE 1998a, Volume 3). Each successive TSPA iteration has advanced the technical understanding of the performance attributes of the natural features and processes and enhanced engineering designs. The next major iteration of TSPA is to be conducted in support of the next major programmatic milestone for the DOE, namely the

Technical Overview of Ecological Risk Assessment - Analysis Phase: Exposure Characterization

Science.gov (United States)

Exposure Characterization is the second major component of the analysis phase of a risk assessment. For a pesticide risk assessment, the exposure characterization describes the potential or actual contact of a pesticide with a plant, animal, or media.

Atmospheric Characterization of the US Offshore Sites and Impact on Turbine Performance (Poster)

Energy Technology Data Exchange (ETDEWEB)

Arora, Dhiraj [Alstom Renewable US LLC; Ehrmann, Robert [Alstom Renewable US LLC; Zuo, Delong [Texas Tech University; Xiao, Jingting [Texas Tech University

2016-10-25

Reliable, long term offshore atmospheric data is critical to development of the US offshore wind industry. There exists significant lack of meteorological, oceanographic, and geological data at potential US offshore sites. Assessment of wind resources at heights in the range of 25-200m is needed to understand and characterize offshore wind turbine performance. Data from the US Department of Energy owned WindSentinel buoy from two US offshore sites and one European site is analyzed. Low Level Jet (LLJ) phenomena and its potential impact on the performance of an offshore wind turbine is investigated.

Comment Response on the Final Report: Peer Review of the Total System Performance Assessment-Viability Assessment (TSPA-VA)

International Nuclear Information System (INIS)

Pendleton, M. W.

1999-01-01

The Management and Operating Contractor established a Performance Assessment Peer Review Panel (hereinafter ''the Panel'') at the request of the U.S. Department of Energy Yucca Mountain Site Characterization Office. The objectives of the peer review were to provide: (1) A formal, independent evaluation and critique of Viability Assessment of a Repository at Yucca Mountain: Total System Performance Assessment, Volume 3 (DOE 1998a; hereinafter ''Total System Performance Assessment-Viability Assessment'') that was conducted in support of the Viability Assessment of a Repository at Yucca Mountain (DOE 1998b). (2) Suggestions for improvements as the U.S. Department of Energy prepares to develop the documentation for a Total System Performance Assessment to support a potential License Application. The Panel conducted a phased review over a two-year period to observe the development and, ultimately, to review the Total System Performance Assessment-Viability Assessment (DOE 1998a). During the development of the Total System Performance Assessment-Viability Assessment (DOE 1998a), the Panel submitted three Interim Reports (Whipple et al., 1997a, 1997b, and 1998) to the Management and Operating Contractor with recommendations and comments on the process models, model abstractions, and draft documentation for the Total System Performance Assessment-Viability Assessment (DOE 1998a). The Panel's Final Report Total System Performance Assessment Peer Review Panel (Whipple et al. 1999; hereinafter ''Final Report'') on the Total System Performance Assessment-Viability Assessment (DOE 1998a) is based primarily on the completed Total System Performance Assessment-Viability Assessment (DOE 1998a), the Total System Performance Assessment-Viability Assessment (TSPA-VA) Analyses Technical Basis Document (CRWMS M and O 1998), and the cited references. The Final Report (Whipple et al. 1999) includes the major points from the three Interim Reports (Whipple et al. 1997a, 1997b, and 1998

Characterization and diversity assessment in coconut collections of ...

African Journals Online (AJOL)

Characterization and genetic diversity assessment among 30 conserved coconut accessions collected from Pacific Ocean Islands and Nicobar Islands for morphological traits, physico-chemical traits of tender nut water, leaf biochemical parameters and molecular characterization by using random amplified polymorphic ...

Iterative performance assessments as a regulatory tool for evaluating repository safety: How experiences from SKI Project-90 were used in formulating the new performance assessment project SITE-94

International Nuclear Information System (INIS)

Andersson, J.

1993-01-01

The Swedish Nuclear Power Inspectorate, SKI, regulatory research program has to prepare for the process of licensing a repository for spent nuclear fuel, by building up the necessary knowledge and review capacity. SKIs main strategy for meeting this demand is to develop an independent performance assessment capability. SKIs first own performance assessment project, Project-90, was completed in 1991 and is now followed by a new project, SITE-94. SITE-94 is based on conclusions reached within Project-90. An independent review of Project-90, carried out by a NEA team of experts, has also contributed to the formation of the project. Another important reason for the project is that the implementing organization in Sweden, SKB, has proposed to submit an application to start detailed investigation of a repository candidate site around 1997. SITE-94 is a performance assessment of a hypothetical repository at a real site. The main objective of the project is to determine how site specific data should be assimilated into the performance assessment process, and to evaluate how uncertainties inherent in site characterization will influence performance assessment results. This will be addressed by exploring multiple interpretations, conceptual models, and parameters consistent with the site data. The site evaluation will strive for consistency between geological, hydrological, rock mechanical, and geochemical descriptions. Other important elements of SITE-94 are the development of a practical and defensible methodology for defining, constructing and analyzing scenarios, the development of approaches for treatment of uncertainties, evaluation of canister integrity, and the development and application of an appropriate quality assurance plan for performance assessments

The effects of performance-based assessment criteria on student performance and self-assessment skills

NARCIS (Netherlands)

Fastré, Greet; Van der Klink, Marcel; Van Merriënboer, Jeroen

2010-01-01

Fastré, G. M. J., Van der Klink, M. R., & Van Merriënboer, J. J. G. (2010). The effects of performance-based assessment criteria on student performance and self-assessment skills. Advances in Health Science Education, 15(4), 517-532.

Optical Thermal Characterization Enables High-Performance Electronics Applications

Energy Technology Data Exchange (ETDEWEB)

2016-02-01

NREL developed a modeling and experimental strategy to characterize thermal performance of materials. The technique provides critical data on thermal properties with relevance for electronics packaging applications. Thermal contact resistance and bulk thermal conductivity were characterized for new high-performance materials such as thermoplastics, boron-nitride nanosheets, copper nanowires, and atomically bonded layers. The technique is an important tool for developing designs and materials that enable power electronics packaging with small footprint, high power density, and low cost for numerous applications.

Performance assessment calculational exercises

International Nuclear Information System (INIS)

Barnard, R.W.; Dockery, H.A.

1990-01-01

The Performance Assessment Calculational Exercises (PACE) are an ongoing effort coordinated by Yucca Mountain Project Office. The objectives of fiscal year 1990 work, termed PACE-90, as outlined in the Department of Energy Performance Assessment (PA) Implementation Plan were to develop PA capabilities among Yucca Mountain Project (YMP) participants by calculating performance of a Yucca Mountain (YM) repository under ''expected'' and also ''disturbed'' conditions, to identify critical elements and processes necessary to assess the performance of YM, and to perform sensitivity studies on key parameters. It was expected that the PACE problems would aid in development of conceptual models and eventual evaluation of site data. The PACE-90 participants calculated transport of a selected set of radionuclides through a portion of Yucca Mountain for a period of 100,000 years. Results include analyses of fluid-flow profiles, development of a source term for radionuclide release, and simulations of contaminant transport in the fluid-flow field. Later work included development of a problem definition for perturbations to the originally modeled conditions and for some parametric sensitivity studies. 3 refs

Lessons Learned from Characterization, Performance Assessment, and EPA Regulatory Review of the 1996 Actinide Source Term for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Larson, K.W.; Moore, R.C.; Nowak, E.J.; Papenguth, H.W.; Jow, H.

1999-01-01

The Waste Isolation Pilot Plant (WIPP) is a US Department of Energy (DOE) facility for the permanent disposal of transuranic waste from defense activities. In 1996, the DOE submitted the Title 40 CFR Part 191 Compliance Certification Application for the Waste Isolation Pilot Plant (CCA) to the US Environmental Protection Agency (EPA). The CCA included a probabilistic performance assessment (PA) conducted by Sandia National Laboratories to establish compliance with the quantitative release limits defined in 40 CFR 191.13. An experimental program to collect data relevant to the actinide source term began around 1989, which eventually supported the 1996 CCA PA actinide source term model. The actinide source term provided an estimate of mobile dissolved and colloidal Pu, Am, U, Th, and Np concentrations in their stable oxidation states, and accounted for effects of uncertainty in the chemistry of brines in waste disposal areas. The experimental program and the actinide source term included in the CCA PA underwent EPA review lasting more than 1 year. Experiments were initially conducted to develop data relevant to the wide range of potential future conditions in waste disposal areas. Interim, preliminary performance assessments and actinide source term models provided insight allowing refinement of experiments and models. Expert peer review provided additional feedback and confidence in the evolving experimental program. By 1995, the chemical database and PA predictions of WIPP performance were considered reliable enough to support the decision to add an MgO backfill to waste rooms to control chemical conditions and reduce uncertainty in actinide concentrations, especially for Pu and Am. Important lessons learned through the characterization, PA modeling, and regulatory review of the actinide source term are (1) experimental characterization and PA should evolve together, with neither activity completely dominating the other, (2) the understanding of physical processes

Performance Demonstration Program Plan for Nondestructive Assay of Drummed Wastes for the TRU Waste Characterization Program

International Nuclear Information System (INIS)

2005-01-01

The Performance Demonstration Program (PDP) for Nondestructive Assay (NDA) is a test program designed to yield data on measurement system capability to characterize drummed transuranic (TRU) waste generated throughout the Department of Energy (DOE) complex. The tests are conducted periodically and provide a mechanism for the independent and objective assessment of NDA system performance and capability relative to the radiological characterization objectives and criteria of the Office of Characterization and Transportation (OCT). The primary documents requiring an NDA PDP are the Waste Acceptance Criteria for the Waste Isolation Pilot Plant (WAC), which requires annual characterization facility participation in the PDP, and the Quality Assurance Program Document (QAPD). This NDA PDP implements the general requirements of the QAPD and applicable requirements of the WAC. Measurement facilities must demonstrate acceptable radiological characterization performance through measurement of test samples comprised of pre-specified PDP matrix drum/radioactive source configurations. Measurement facilities are required to analyze the NDA PDP drum samples using the same procedures approved and implemented for routine operational waste characterization activities. The test samples provide an independent means to assess NDA measurement system performance and compliance per criteria delineated in the NDA PDP Plan. General inter-comparison of NDA measurement system performance among DOE measurement facilities and commercial NDA services can also be evaluated using measurement results on similar NDA PDP test samples. A PDP test sample consists of a 55-gallon matrix drum containing a waste matrix type representative of a particular category of the DOE waste inventory and nuclear material standards of known radionuclide and isotopic composition typical of DOE radioactive material. The PDP sample components are made available to participating measurement facilities as designated by the

DOE site performance assessment activities

International Nuclear Information System (INIS)

1990-07-01

Information on performance assessment capabilities and activities was collected from eight DOE sites. All eight sites either currently dispose of low-level radioactive waste (LLW) or plan to dispose of LLW in the near future. A survey questionnaire was developed and sent to key individuals involved in DOE Order 5820.2A performance assessment activities at each site. The sites surveyed included: Hanford Site (Hanford), Idaho National Engineering Laboratory (INEL), Los Alamos National Laboratory (LANL), Nevada Test Site (NTS), Oak Ridge National Laboratory (ORNL), Paducah Gaseous Diffusion Plant (Paducah), Portsmouth Gaseous Diffusion Plant (Portsmouth), and Savannah River Site (SRS). The questionnaire addressed all aspects of the performance assessment process; from waste source term to dose conversion factors. This report presents the information developed from the site questionnaire and provides a comparison of site-specific performance assessment approaches, data needs, and ongoing and planned activities. All sites are engaged in completing the radioactive waste disposal facility performance assessment required by DOE Order 5820.2A. Each site has achieved various degrees of progress and have identified a set of critical needs. Within several areas, however, the sites identified common needs and questions

Texas' performance assessment work

International Nuclear Information System (INIS)

Charbeneau, R.J.; Hertel, N.E.; Pollard, C.G.

1990-01-01

The Texas Low-Level Radioactive Waste Disposal Authority is completing two years of detailed on-site suitability studies of a potential low-level radioactive waste disposal site in Hudspeth County, Texas. The data from these studies have been used to estimate site specific parameters needed to do a performance assessment of the site. The radiological impacts of the site have been analyzed as required for a license application. The approach adopted for the performance assessment was to use simplified and yet conservative assumptions with regard to releases, radionuclide transport, and dose calculations. The methodologies employed in the performance assessment are reviewed in the paper. Rather than rely on a single computer code, a modular approach to the performance assessment was selected. The HELP code was used to calculate the infiltration rate through the trench covers and the amount of leachate released from this arid site. Individual pathway analyses used spreadsheet calculations. These calculations were compared with those from other computer models including CRRIS, INGDOS, PATHRAE, and MICROSHIELD copyright, and found to yield conservative estimates of the effective whole body dose. The greatest difficulty in performing the radiological assessment of the site was the selection of reasonable source terms for release into the environment. A surface water pathway is unreasonable for the site. Though also unlikely, the groundwater pathway with exposure through a site boundary well was found to yield the largest calculated dose. The more likely pathway including transport of leachate from the facility through the unsaturated zone and returning to the ground surface yields small doses. All calculated doses associated with normal releases of radioactivity are below the regulatory limits

Characterization and improvement of the nuclear safety culture through self-assessment

International Nuclear Information System (INIS)

Levin, H.A.; McGehee, R.B.; Cottle, W.T.

1996-01-01

Organizational culture has a powerful influence on overall corporate performance. The ability to sustain superior results in ensuring the public's health and safety is predicated on an organization's deeply embedded values and behavioral norms and how these affect the ability to change and seek continuous improvement. The nuclear industry is developing increased recognition of the relationship of culture to nuclear safety performance as a critical element of corporate strategy. This paper describes a self-assessment methodology designed to characterize and improve the nuclear safety culture, including processes for addressing employee concerns. This methodology has been successfully applied on more than 30 occasions in the last several years, resulting in measurable improvements in safety performance and quality and employee motivation, productivity, and morale. Benefits and lessons learned are also presented

Designing Second Language Performance Assessments. Technical Report.

Science.gov (United States)

Norris, John M.; Brown, James Dean; Hudson, Thom; Yoshioka, Jim

This technical report focuses on the decision-making potential provided by second language performance assessments. First, performance assessment is situated within the broader discussion of alternatives in language assessment and in educational assessment in general. Next, issues in performance assessment design, implementation, reliability, and…

Proceedings of the tenth annual DOE low-level waste management conference: Session 2: Site performance assessment

International Nuclear Information System (INIS)

1988-12-01

This document contains twelve papers on various aspects of low-level radioactive waste management. Topics of this volume include: performance assessment methodology; remedial action alternatives; site selection and site characterization procedures; intruder scenarios; sensitivity analysis procedures; mathematical models for mixed waste environmental transport; and risk assessment methodology. Individual papers were processed separately for the database

Performance Assessment in Courts - The Swiss Case

Directory of Open Access Journals (Sweden)

Andreas Lienhard

2014-12-01

Full Text Available Abstract Performance assessments have become commonplace in management, even in the public sector. With the increasing pressure on courts to perform while making efficient use of resources, performance assessments in the justice system are also gaining in importance. However, the need for judicial independence poses special challenges for performance assessments in courts. Against this background, this article conducts a constitutional appraisal, and contrasts the need for judicial independence with the principles governing effectiveness and efficiency, self-government and supervision, and appointment and re-appointment. A duty to guarantee justice can be derived from this that does not in principle exclude the performance assessment of judges, but even renders it essential, subject to compliance with certain requirements. In these circumstances, it seems hardly surprising that numerous countries conduct performance assessments of judges and also that various international institutions have developed principles for this purpose, a summary of which is presented – in Switzerland’s case based on a recently conducted survey. In the field of conflict between the guaranteeing justice and protecting the judiciary, the following key questions arise in particular: What is the purpose of performance assessments and what are the consequences?What is subjected to a performance assessment and what are the assessment criteria?How is performance recorded as the basis for the performance assessment?Who is subjected to a performance assessment, and must a distinction be made between judges in higher and lower courts?Who carries out the performance assessment and what methods of protecting one’s rights are available?Who should receive the results of the performance assessment?The contribution sketches out possible answers to these key questions and aims to encourage academics and practitioners to give further consideration to this subject.

Performance Assessment National Review Group

International Nuclear Information System (INIS)

Lieberman, J.A.; Davis, S.N.; Harleman, D.R.F.

1985-02-01

Performance assessment involves predicting the potential radiological impact of a nuclear waste disposal system, taking into account all of the natural and engineered components of the system. It includes the analysis and evaluation of predicted system and component performance to determine compliance with regulatory performance criteria. In the context of the nuclear waste management program, performance assessment has five major purposes: to assist in the evaluation and selection of repository sites; to guide the research, development, and testing programs; to assist in the evaluation of repository designs; to assist in the evaluation of the design and performance of engineered barriers; and to show regulatory compliance and support repository licensing. Current performance assessment methodologies are still in the developmental stage. Only the simplest of bounding calculations have produced quantitative predictions of radionuclide releases. The methodologies require considerable extension and validation before they can provide answers suitable for project decisions and licensing. 135 refs., 9 figs., 1 tab

Context for performance assessment

International Nuclear Information System (INIS)

Kocher, D.C.

1997-01-01

In developing its recommendations on performance assessment for disposal of low-level radioactive waste, Scientific committee 87-3 of the National Council on Radiation Protection and Measurements (NCRP) has considered a number of topics that provide a context for the development of suitable approaches to performance assessment. This paper summarizes the Committee' discussions on these topics, including (1) the definition of low-level waste and its sources and properties, as they affect the variety of wastes that must be considered, (2) fundamental objectives and principles of radioactive waste disposal and their application to low-level waste, (3) current performance objectives for low-level waste disposal in the US, with particular emphasis on such unresolved issues of importance to performance assessment as the time frame for compliance, requirements for protection of groundwater and surface water, inclusion of doses from radon, demonstrating compliance with fixed performance objectives using highly uncertain model projections, and application of the principle that releases to the environment should be maintained as low as reasonably achievable (ALARA), (4) the role of active and passive institutional controls over disposal sites, (5) the role of the inadvertent human intruder in low-level waste disposal, (6) model validation and confidence in model outcomes, and (7) the concept of reasonable assurance of compliance

Operational human performance reliability assessment (OHPRA)

International Nuclear Information System (INIS)

Haas, P.M.; Swanson, P.J.; Connelly, E.M.

1993-01-01

Operational Human Performance Reliability Assessment (OHPRA) is an approach for assessing human performance that is being developed in response to demands from modern process industries for practical and effective tools to assess and improve human performance, and therefore overall system performance and safety. The single most distinguishing feature of the approach is that is defines human performance in open-quotes operationalclose quotes terms. OHPRA is focused not on generation of human error probabilities, but on practical analysis of human performance to aid management in (1) identifying open-quotes fixableclose quotes problems and (2) providing input on the importance and nature of potential improvements. Development of the model in progress uses a unique approach for eliciting expert strategies for assessing performance. A PC-based model incorporating this expertise is planned. A preliminary version of the approach has already been used successfully to identify practical human performance problems in reactor and chemical process plant operations

Performance assessment plans and methods for the Salt Repository Project

International Nuclear Information System (INIS)

1984-08-01

This document presents the preliminary plans and anticipated methods of the Salt Repository Project (SRP) for assessing the postclosure and radiological aspects of preclosure performance of a nuclear waste repository in salt. This plan is intended to be revised on an annual basis. The emphasis in this preliminary effort is on the method of conceptually dividing the system into three subsystems (the very near field, the near field, and the far field) and applying models to analyze the behavior of each subsystem and its individual components. The next revision will contain more detailed plans being developed as part of Site Characterization Plan (SCP) activities. After a brief system description, this plan presents the performance targets which have been established for nuclear waste repositories by regulatory agencies (Chapter 3). The SRP approach to modeling, including sensitivity and uncertainty techniques is then presented (Chapter 4). This is followed by a discussion of scenario analysis (Chapter 5), a presentation of preliminary data needs as anticipated by the SRP (Chapter 6), and a presentation of the SRP approach to postclosure assessment of the very near field, the near field, and the far field (Chapters 7, 8, and 9, respectively). Preclosure radiological assessment is discussed in Chapter 10. Chapter 11 presents the SRP approach to code verification and validation. Finally, the Appendix lists all computer codes anticipated for use in performance assessments. The list of codes will be updated as plans are revised

Proceedings of the tenth annual DOE low-level waste management conference: Session 2: Site performance assessment

Energy Technology Data Exchange (ETDEWEB)

1988-12-01

This document contains twelve papers on various aspects of low-level radioactive waste management. Topics of this volume include: performance assessment methodology; remedial action alternatives; site selection and site characterization procedures; intruder scenarios; sensitivity analysis procedures; mathematical models for mixed waste environmental transport; and risk assessment methodology. Individual papers were processed separately for the database. (TEM)

Hardware performance assessment recommendations and tools for baropodometric sensor systems

Directory of Open Access Journals (Sweden)

Claudia Giacomozzi

2010-06-01

Full Text Available Accurate plantar pressure measurements are mandatory in both clinical and research contexts. Differences in accuracy, precision, reliability of pressure measurement devices (PMDs prevented so far the onset of standardization processes and of reliable reference datasets. The Italian National Institute of Health (ISS approved and conducted a scientific project aimed to design, validate and implement dedicated testing methods for both in-factory and on-the-field PMD assessment. A general-purpose experimental set-up was built, complete and suitable for the assessment of PMDs based on different sensor technology, electronic conditioning and mechanical solutions. Preliminary assessments have been conducted on 5 commercial PMDs. The study lead to the definition of: i an appropriate set of instruments and procedures for PMD technical assessment; ii a minimum set of significant parameters for the technical characterization of the PMD performance; iii some recommendations to both manufacturers and end users for an appropriate use in clinics and in research context

Performance assessment in algebra learning process

Science.gov (United States)

Lestariani, Ida; Sujadi, Imam; Pramudya, Ikrar

2017-12-01

The purpose of research to describe the implementation of performance assessment on algebra learning process. The subject in this research is math educator of SMAN 1 Ngawi class X. This research includes descriptive qualitative research type. Techniques of data collecting are done by observation method, interview, and documentation. Data analysis technique is done by data reduction, data presentation, and conclusion. The results showed any indication that the steps taken by the educator in applying the performance assessment are 1) preparing individual worksheets and group worksheets, 2) preparing rubric assessments for independent worksheets and groups and 3) making performance assessments rubric to learners’ performance results with individual or groups task.

Sensitivity of hydrological performance assessment analysis to variations in material properties, conceptual models, and ventilation models

Energy Technology Data Exchange (ETDEWEB)

Sobolik, S.R.; Ho, C.K.; Dunn, E. [Sandia National Labs., Albuquerque, NM (United States); Robey, T.H. [Spectra Research Inst., Albuquerque, NM (United States); Cruz, W.T. [Univ. del Turabo, Gurabo (Puerto Rico)

1996-07-01

The Yucca Mountain Site Characterization Project is studying Yucca Mountain in southwestern Nevada as a potential site for a high-level nuclear waste repository. Site characterization includes surface- based and underground testing. Analyses have been performed to support the design of an Exploratory Studies Facility (ESF) and the design of the tests performed as part of the characterization process, in order to ascertain that they have minimal impact on the natural ability of the site to isolate waste. The information in this report pertains to sensitivity studies evaluating previous hydrological performance assessment analyses to variation in the material properties, conceptual models, and ventilation models, and the implications of this sensitivity on previous recommendations supporting ESF design. This document contains information that has been used in preparing recommendations for Appendix I of the Exploratory Studies Facility Design Requirements document.

Sensitivity of hydrological performance assessment analysis to variations in material properties, conceptual models, and ventilation models

International Nuclear Information System (INIS)

Sobolik, S.R.; Ho, C.K.; Dunn, E.; Robey, T.H.; Cruz, W.T.

1996-07-01

The Yucca Mountain Site Characterization Project is studying Yucca Mountain in southwestern Nevada as a potential site for a high-level nuclear waste repository. Site characterization includes surface- based and underground testing. Analyses have been performed to support the design of an Exploratory Studies Facility (ESF) and the design of the tests performed as part of the characterization process, in order to ascertain that they have minimal impact on the natural ability of the site to isolate waste. The information in this report pertains to sensitivity studies evaluating previous hydrological performance assessment analyses to variation in the material properties, conceptual models, and ventilation models, and the implications of this sensitivity on previous recommendations supporting ESF design. This document contains information that has been used in preparing recommendations for Appendix I of the Exploratory Studies Facility Design Requirements document

Review of SR 97 performance assessment

International Nuclear Information System (INIS)

Glynn, P.D.

2000-01-01

This review has identified many technical problems in the SR 97 performance assessment. The general impression of this reviewer is that SKB has been disingenuous in its performance assessment effort. It has not cited important differences of opinion with its own views. Furthermore, there are many inconsistencies in the SR 97 report that all together leave the impression that there are many more uncertainties in the SR 97 performance assessment than SKB would perhaps care to admit. Additionally, despite SKB's statements to the contrary, many of the analyses conducted for the SR 97 performance assessment can be clearly shown not to have been based on 'conservative' assumptions. Finally, SKB has made little effort to consider possible coupling effects between their different scenarios in SR 97. This is a serious flaw in the SR 97 performance assessment. The comments in this review should not be taken to imply that the KBS-3 nuclear waste disposal method will not be able to meet the safety and radiation protection requirements which SKI and SSI have specified in recent years. Instead, my conclusion is simply that the SR 97 performance assessment of the KBS-3 method would have been more believable had it been based on a forthright and comprehensive discussion of facts, uncertainties and opinions, and on a more conservative choice of assumptions. As it stands, the SR 97 performance assessment is not very credible

Technical summary of the Performance Assessment Calculational Exercises for 1990 (PACE-90)

International Nuclear Information System (INIS)

Barnard, R.W.; Dockery, H.A.

1991-06-01

A Performance Assessment Calculational Exercise for 1990 (PACE-90) was coordinated by the Yucca Mountain Site Characterization Project Office for a total-system performance-assessment problem. The primary objectives of the exercise were to develop performance-assessment computational capabilities of the Yucca Mountain Project participates and to aid in identifying critical elements and processes associated with the calculation. The problem defined for PACE-90 was simulation of a ''nominal case'' groundwater flow and transport of a selected group of radionuclides through a portion of Yucca Mountain. Both 1-D and 2-D calculations were run for a modeling period of 100,000 years. The nuclides used, 99 Tc, 135 Cs, 129 I, and 237 Np, were representative of ''classes'' of long-lived nuclides expected to be present in the waste inventory. Movement of the radionuclides was simulated through a detailed hydrostratigraphy developed from Yucca Mountain data specifically for this exercise. The results showed that, for the specified conditions with the conceptual models used in the problem, no radioactive contamination reached the water table, 230 m below the repository. However, due to the unavailability of sufficient site-specific data, the results of this exercise cannot be considered a comprehensive total-system- performance assessment of the Yucca Mountain site as a high-level- waste repository. 46 refs., 94 figs., 19 tabs

Simulation-based Assessment to Reliably Identify Key Resident Performance Attributes.

Science.gov (United States)

Blum, Richard H; Muret-Wagstaff, Sharon L; Boulet, John R; Cooper, Jeffrey B; Petrusa, Emil R; Baker, Keith H; Davidyuk, Galina; Dearden, Jennifer L; Feinstein, David M; Jones, Stephanie B; Kimball, William R; Mitchell, John D; Nadelberg, Robert L; Wiser, Sarah H; Albrecht, Meredith A; Anastasi, Amanda K; Bose, Ruma R; Chang, Laura Y; Culley, Deborah J; Fisher, Lauren J; Grover, Meera; Klainer, Suzanne B; Kveraga, Rikante; Martel, Jeffrey P; McKenna, Shannon S; Minehart, Rebecca D; Mitchell, John D; Mountjoy, Jeremi R; Pawlowski, John B; Pilon, Robert N; Shook, Douglas C; Silver, David A; Warfield, Carol A; Zaleski, Katherine L

2018-04-01

Obtaining reliable and valid information on resident performance is critical to patient safety and training program improvement. The goals were to characterize important anesthesia resident performance gaps that are not typically evaluated, and to further validate scores from a multiscenario simulation-based assessment. Seven high-fidelity scenarios reflecting core anesthesiology skills were administered to 51 first-year residents (CA-1s) and 16 third-year residents (CA-3s) from three residency programs. Twenty trained attending anesthesiologists rated resident performances using a seven-point behaviorally anchored rating scale for five domains: (1) formulate a clear plan, (2) modify the plan under changing conditions, (3) communicate effectively, (4) identify performance improvement opportunities, and (5) recognize limits. A second rater assessed 10% of encounters. Scores and variances for each domain, each scenario, and the total were compared. Low domain ratings (1, 2) were examined in detail. Interrater agreement was 0.76; reliability of the seven-scenario assessment was r = 0.70. CA-3s had a significantly higher average total score (4.9 ± 1.1 vs. 4.6 ± 1.1, P = 0.01, effect size = 0.33). CA-3s significantly outscored CA-1s for five of seven scenarios and domains 1, 2, and 3. CA-1s had a significantly higher proportion of worrisome ratings than CA-3s (chi-square = 24.1, P < 0.01, effect size = 1.50). Ninety-eight percent of residents rated the simulations more educational than an average day in the operating room. Sensitivity of the assessment to CA-1 versus CA-3 performance differences for most scenarios and domains supports validity. No differences, by experience level, were detected for two domains associated with reflective practice. Smaller score variances for CA-3s likely reflect a training effect; however, worrisome performance scores for both CA-1s and CA-3s suggest room for improvement.

PERFORMANCE ASSESSMENT FOR FIELD SPORTS

Directory of Open Access Journals (Sweden)

Christopher Carling

2009-03-01

Full Text Available DESCRIPTION The book covers the various sport science assessment procedures for sports such as soccer, rugby, field hockey and lacrosse. It provides detailed and clear information about laboratory and field-based methods that can be used to assess and improve both individual and team performance. PURPOSE The book aims to provide a contemporary reference tool for selection of appropriate testing procedures for sports across a range of scientific disciplines. FEATURES The text begins with a chapter on the rationales for performance assessments, the use of technology and the necessity for procedures to conform to scientific rigor, explaining the importance of test criteria. This chapter ends by emphasizing the importance of the feedback process and vital considerations for the practitioner when interpreting the data, selecting which information is most important and how to deliver this back to the athlete or coach in order to deliver a positive performance outcome. The next two chapters focus on psychological assessments with respect to skill acquisition, retention and execution providing a variety of qualitative and quantitative options, underpinned with scientific theory and contextualized in order to improve the understanding of the application of these methods to improve anticipation and decision-making to enhance game intelligence.Chapter 4 provides coverage of match analysis techniques in order to make assessments of technical, tactical and physical performances. Readers learn about a series of methodologies ranging from simplistic pen and paper options through to sophisticated technological systems with some exemplar data also provided. Chapters 5 through 7 cover the physiological based assessments, including aerobic, anaerobic and anthropometric procedures. Each chapter delivers a theoretical opening section before progressing to various assessment options and the authors make great efforts to relate to sport-specific settings. The final

Performance assessment: a peer review

International Nuclear Information System (INIS)

Lieberman, J.A.; Lee, W.W.L.

1986-01-01

This paper describes the rationale, membership, operation and major observations of the Performance Assessment National Review Group. The Group was assembled by Weston at the request of the US Department of Energy Office of Civilian Radioactive Waste Management to review performance assessment work in the US basalt, salt and tuff repository projects. The purposes were to evaluate the adequacy of the current methods, identify deficiencies, and suggest potential improvement on repository performance assessment. To perform the review, Weston retained a group of distinguished consultants who have had extensive experience in disciplines pertinent to management of radioactive wastes including mathematical modeling of fluid transport. Topics reviewed included flow and transport, source term and uncertainty analysis. While the emphasis was on methodologies, the Projects were specifically requested to show currently available results so that the way they utilized familiar methodologies could be evaluated. This paper will highlight some of the technical observations of the Group as well as some managerial and institutional issues

Making Performance Assessments a Part of Accountability

Science.gov (United States)

Haun, Billy

2018-01-01

The purpose of this commentary is to describe recent efforts in Virginia to develop and use performance assessments, including the challenges that emerged during this process and key considerations for states that integrate performance assessment into their systems. Performance assessments can play an important role in preparing students for…

Performance Assessment of Mergers and Acquisitions

DEFF Research Database (Denmark)

Wang, Daojuan; Moini, Hamid

2012-01-01

on the performance measures and benchmarks adopted in M&A research field and the relevant empirical results. We find that the definitions of performance varied in terms of accounting, financial, operational and perceptual metrics. And performance assessment is sensitive to the definition of performance, methodology......Corporate mergers and acquisitions (M&As) have been increasing popular during these decades. However, a majority of research show failure rate (40% - 80%) has not significantly changed. This “success paradox” triggers us to reflect on performance assessment of M&As: how the performance of M...

A Framework for Treating Uncertainty to Facilitate Waste Disposal Decision Making - Application of the Approach to GCD Performance Assessment

International Nuclear Information System (INIS)

Brown, T.J.; Cochran, J.R.; Gallegos, D.P.

1999-01-01

This paper presents an approach for treating uncertainty in the performance assessment process to efficiently address regulatory performance objectives for radioactive waste disposal and discusses the application of the approach at the Greater Confinement Disposal site. In this approach, the performance assessment methodology uses probabilistic risk assessment concepts to guide effective decisions about site characterization activities and provides a path toward reasonable assurance regarding regulatory compliance decisions. Although the approach is particularly amenable to requirements that are probabilistic in nature, the approach is also applicable to deterministic standards such as the dose-based and concentration-based requirements

Power performance assessment. Final report

International Nuclear Information System (INIS)

Frandsen, S.

1998-12-01

In the increasingly commercialised wind power marketplace, the lack of precise assessment methods for the output of an investment is becoming a barrier for wider penetration of wind power. Thus, addressing this problem, the overall objectives of the project are to reduce the financial risk in investment in wind power projects by significantly improving the power performance assessment methods. Ultimately, if this objective is successfully met, the project may also result in improved tuning of the individual wind turbines and in optimisation methods for wind farm operation. The immediate, measurable objectives of the project are: To prepare a review of existing contractual aspects of power performance verification procedures of wind farms; to provide information on production sensitivity to specific terrain characteristics and wind turbine parameters by analyses of a larger number of wind farm power performance data available to the proposers; to improve the understanding of the physical parameters connected to power performance in complex environment by comparing real-life wind farm power performance data with 3D computational flow models and 3D-turbulence wind turbine models; to develop the statistical framework including uncertainty analysis for power performance assessment in complex environments; and to propose one or more procedures for power performance evaluation of wind power plants in complex environments to be applied in contractual agreements between purchasers and manufacturers on production warranties. Although the focus in this project is on power performance assessment the possible results will also be of benefit to energy yield forecasting, since the two tasks are strongly related. (au) JOULE III. 66 refs.; In Co-operation Renewable Energy System Ltd. (GB); Centre for Renewable Energy (GR); Aeronautic Research Centre (SE); National Engineering Lab. (GB); Public Power Cooperation (GR)

Conceptual framework for performance assessment: competency, competence and performance in the context of assessments in healthcare--deciphering the terminology.

Science.gov (United States)

Khan, Kamran; Ramachandran, Sankaranarayanan

2012-01-01

The definitions of performance, competence and competency are not very clear in the literature. The assessment of performance and the selection of tools for this purpose depend upon a deep understanding of each of the above terms and the factors influencing performance. In this article, we distinguish between competence and competency and explain the relationship of competence and performance in the light of the Dreyfus model of skills acquisition. We briefly critique the application of the principles described by Miller to the modern assessment tools and distinguish between assessment of actual performance in workplace settings and the observed performance, demonstrated by the candidates in the workplace or simulated settings. We describe a modification of the Dreyfus model applicable to assessments in healthcare and propose a new model for the assessment of performance and performance rating scale (PRS) based on this model. We propose that the use of adapted versions of this PRS will result in benchmarking of performance and allowing the candidates to track their progression of skills in various areas of clinical practice.

Competency Assessment Using Key Performance Indicators

OpenAIRE

Elena Alexandra Toader; Laura Brad

2015-01-01

The paper proposes a method for computing the scores of the key performance indicators resulted in the competency assessment process. The key performance indicators are estimated considering four performance levels that an IT professional can obtain at the end of the assessment process. We suggest as the best approach for estimating the performance key indicators an online questionnaire filled by 60 employees that work in IT Romanian companies. The results provide evidence that the difference...

Integration of Probabilistic Exposure Assessment and Probabilistic Hazard Characterization

NARCIS (Netherlands)

Voet, van der H.; Slob, W.

2007-01-01

A method is proposed for integrated probabilistic risk assessment where exposure assessment and hazard characterization are both included in a probabilistic way. The aim is to specify the probability that a random individual from a defined (sub)population will have an exposure high enough to cause a

Assessing Scientific Performance.

Science.gov (United States)

Weiner, John M.; And Others

1984-01-01

A method for assessing scientific performance based on relationships displayed numerically in published documents is proposed and illustrated using published documents in pediatric oncology for the period 1979-1982. Contributions of a major clinical investigations group, the Childrens Cancer Study Group, are analyzed. Twenty-nine references are…

Total System Performance Assessment, 1993: An evaluation of the potential Yucca Mountain repository, B00000000-01717-2200-00099, Rev. 01

International Nuclear Information System (INIS)

Andrews, R.W.; Dale, T.F.; McNeish, J.A.

1994-03-01

Total System Performance Assessments are an important component in the evaluation of the suitability of Yucca Mountain, Nevada as a potential site for a mined geologic repository for the permanent disposal of high-level radioactive wastes in the United States. The Total System Performance Assessments are conducted iteratively during the site characterization to identify issues which should be addressed by the characterization and design activities as well as providing input to regulatory/licensing and programmatic decisions. During fiscal years 1991 and 1992, the first iteration of Total System Performance Assessment (hereafter referred to as TSPA 1991) was completed by Sandia National Laboratories and Pacific Northwest Laboratory. Beginning in fiscal year 1993, the Civilian Radioactive Waste Management System Management and Operating Contractor was assigned the responsibility to plan, coordinate, and contribute to the second iteration of Total System Performance Assessment (hereafter referred to as TSPA 1993). This document presents the objectives, approach, assumptions, input, results, conclusions, and recommendations associated with the Management and Operating Contractor contribution to TSPA 1993. A parallel effort was conducted by Sandia National Laboratories and is reported in Wilson et al. (1994, in press)

Scientific investigation plan for NNWSI WBS element 1.2.2.5.L: NNWSI waste package performance assessment: Revision 1

International Nuclear Information System (INIS)

Eggert, K.G.; O'Connell, W.J.; Lappa, D.A.

1986-01-01

Waste package performance assessment contains three broad categories of activities. These activities are: (1) development of a hydrothermal flow and transport model to test concepts to be used in establishing boundary conditions for performance calculations, and to interface EBS release calculations with total system performance calculations; (2) development of a waste package systems model to provide integrated deterministic assessments of performance and analyses of waste package designs; and (3) development of an uncertainty methodology for combination with the system model to perform probabilistic reliability and performance analysis waste package designs. The first category contains activities that aid in determining the scope of a separate, simplified set of hydrologic calculations needed to characterize the waste package environment for performance assessment calculations. The last two activity categories are directly concerned with waste package performance calculations. A rationale for each activity under these groups is presented. All of the activities of performance assessment are either code development or analyses of waste package problems

Characterization of alternative electric generation technologies for the SPS comparative assessment: volume 2, central-station technologies

International Nuclear Information System (INIS)

1980-08-01

The SPS Concept Development and Evaluation Program includes a comparative assessment. An early first step in the assessment process is the selection and characterization of alternative technologies. This document describes the cost and performance (i.e., technical and environmental) characteristics of six central station energy alternatives: (1) conventional coal-fired powerplant; (2) conventional light water reactor (LWR); (3) combined cycle powerplant with low-Btu gasifiers; (4) liquid metal fast breeder reactor (LMFBR); (5) photovoltaic system without storage; and (6) fusion reactor

Octalithium plumbate as breeding blanket ceramic: Neutronic performances, synthesis and partial characterization

International Nuclear Information System (INIS)

Colominas, S.; Palermo, I.; Abellà, J.; Gómez-Ros, J.M.; Sanz, J.; Sedano, L.

2012-01-01

Highlights: ► Definition of a suitable configuration for the Li 8 PbO 6 breeding blanket design. ► Demonstration of the feasibility of Li 8 PbO 6 as a breeding material. ► Synthesis optimization in the Li 8 PbO 6 production. ► Characterization of Li 8 PbO 6 by X-ray phase analysis is discussed. - Abstract: A neutronic assessment of the performances of a helium-cooled Li 8 PbO 6 breeding blanket (BB) for the conceptual design of a DEMO fusion reactor is given. Different BB configurations have been considered in order to minimize the amount of beryllium required for neutron multiplication, including the use of graphite as reflector material. The calculated neutronic responses: tritium breeding ratio (TBR), power deposition in TF coils and power amplification factor, indicate the feasibility of Li 8 PbO 6 as breeding material. Furthermore, the synthesis and characterization of Li 8 PbO 6 by X-ray phase analysis are also discussed.

How Do States Integrate Performance Assessment in Their Systems of Assessment?

Science.gov (United States)

Stosich, Elizabeth Leisy; Snyder, Jon; Wilczak, Katie

2018-01-01

This paper reviews state strategies for incorporating performance assessment in policy and practice. Specifically, the paper reviews the use of performance assessment in 12 states in the Innovation Lab Network, a group committed to developing systems of assessment that provide meaningful measures of college and career readiness. This review…

Validation of geotechnical software for repository performance assessment

International Nuclear Information System (INIS)

LeGore, T.; Hoover, J.D.; Khaleel, R.; Thornton, E.C.; Anantatmula, R.P.; Lanigan, D.C.

1989-01-01

An important step in the characterization of a high level nuclear waste repository is to demonstrate that geotechnical software, used in performance assessment, correctly models validation. There is another type of validation, called software validation. It is based on meeting the requirements of specifications documents (e.g. IEEE specifications) and does not directly address the correctness of the specifications. The process of comparing physical experimental results with the predicted results should incorporate an objective measure of the level of confidence regarding correctness. This paper reports on a methodology developed that allows the experimental uncertainties to be explicitly included in the comparison process. The methodology also allows objective confidence levels to be associated with the software. In the event of a poor comparison, the method also lays the foundation for improving the software

Performance assessment review for DOE LLW disposal facilities

International Nuclear Information System (INIS)

Wilhite, Elmer L.

1992-01-01

The United States Department of Energy (US DOE) disposes of low-level radioactive waste in near-surface disposal facilities. Safety of the disposal operations is evaluated for operational safety as well as long-term safety. Operational safety is evaluated based on the perceived level of hazard of the operation and may vary from a simple safety assessment to a safety analysis report. Long-term safety of all low-level waste disposal systems is evaluated through the conduct of a radiological performance assessment. The US DOE has established radiological performance objectives for disposal of low-level waste. They are to protect a member of the general public from receiving over 25 mrem/y, and an inadvertent intruder into the waste from receiving over 100 mrem/y continuous exposure or 500 mrem from a single exposure. For a disposal system to be acceptable, a performance assessment must be prepared which must be technically accurate and provide reasonable assurance that these performance objectives are met. Technical quality of the performance assessments is reviewed by a panel of experts. The panel of experts is used in two ways to assure the technical quality of performance assessment. A preliminary (generally 2 day) review by the panel is employed in the late stages of development to provide guidance on finalizing the performance assessment. The comments from this review are communicated to the personnel responsible for the performance assessment for consideration and incorporation. After finalizing the performance assessment, it is submitted for a formal review. The formal review is accomplished by a much more thorough analysis of the performance assessment over a multi-week time period. The panel then formally reports their recommendations to the US DOE waste management senior staff who make the final determination on acceptability of the performance assessment. A number of lessons have been learned from conducting several preliminary reviews of performance

Instruction-level performance modeling and characterization of multimedia applications

Energy Technology Data Exchange (ETDEWEB)

Luo, Y. [Los Alamos National Lab., NM (United States). Scientific Computing Group; Cameron, K.W. [Louisiana State Univ., Baton Rouge, LA (United States). Dept. of Computer Science

1999-06-01

One of the challenges for characterizing and modeling realistic multimedia applications is the lack of access to source codes. On-chip performance counters effectively resolve this problem by monitoring run-time behaviors at the instruction-level. This paper presents a novel technique of characterizing and modeling workloads at the instruction level for realistic multimedia applications using hardware performance counters. A variety of instruction counts are collected from some multimedia applications, such as RealPlayer, GSM Vocoder, MPEG encoder/decoder, and speech synthesizer. These instruction counts can be used to form a set of abstract characteristic parameters directly related to a processor`s architectural features. Based on microprocessor architectural constraints and these calculated abstract parameters, the architectural performance bottleneck for a specific application can be estimated. Meanwhile, the bottleneck estimation can provide suggestions about viable architectural/functional improvement for certain workloads. The biggest advantage of this new characterization technique is a better understanding of processor utilization efficiency and architectural bottleneck for each application. This technique also provides predictive insight of future architectural enhancements and their affect on current codes. In this paper the authors also attempt to model architectural effect on processor utilization without memory influence. They derive formulas for calculating CPI{sub 0}, CPI without memory effect, and they quantify utilization of architectural parameters. These equations are architecturally diagnostic and predictive in nature. Results provide promise in code characterization, and empirical/analytical modeling.

Performance Characterization and Auto-Ignition Performance of a Rapid Compression Machine

OpenAIRE

Hao Liu; Hongguang Zhang; Zhicheng Shi; Haitao Lu; Guangyao Zhao; Baofeng Yao

2014-01-01

A rapid compression machine (RCM) test bench is developed in this study. The performance characterization and auto-ignition performance tests are conducted at an initial temperature of 293 K, a compression ratio of 9.5 to 16.5, a compressed temperature of 650 K to 850 K, a driving gas pressure range of 0.25 MPa to 0.7 MPa, an initial pressure of 0.04 MPa to 0.09 MPa, and a nitrogen dilution ratio of 35% to 65%. A new type of hydraulic piston is used to address the problem in which the hydraul...

Site characterization at the Rabbit Valley Geophysical Performance Evaluation Range

International Nuclear Information System (INIS)

Koppenjan, S.; Martinez, M.

1994-01-01

The United States Department of Energy (US DOE) is developing a Geophysical Performance Evaluation Range (GPER) at Rabbit Valley located 30 miles west of Grand Junction, Colorado. The purpose of the range is to provide a test area for geophysical instruments and survey procedures. Assessment of equipment accuracy and resolution is accomplished through the use of static and dynamic physical models. These models include targets with fixed configurations and targets that can be re-configured to simulate specific specifications. Initial testing (1991) combined with the current tests at the Rabbit Valley GPER will establish baseline data and will provide performance criteria for the development of geophysical technologies and techniques. The US DOE's Special Technologies Laboratory (STL) staff has conducted a Ground Penetrating Radar (GPR) survey of the site with its stepped FM-CW GPR. Additionally, STL contracted several other geophysical tests. These include an airborne GPR survey incorporating a ''chirped'' FM-CW GPR system and a magnetic survey with a surfaced-towed magnetometer array unit Ground-based and aerial video and still frame pictures were also acquired. STL compiled and analyzed all of the geophysical maps and created a site characterization database. This paper discusses the results of the multi-sensor geophysical studies performed at Rabbit Valley and the future plans for the site

Characterizing College Science Assessments: The Three-Dimensional Learning Assessment Protocol

Science.gov (United States)

Underwood, Sonia M.; Matz, Rebecca L.; Posey, Lynmarie A.; Carmel, Justin H.; Caballero, Marcos D.; Fata-Hartley, Cori L.; Ebert-May, Diane; Jardeleza, Sarah E.; Cooper, Melanie M.

2016-01-01

Many calls to improve science education in college and university settings have focused on improving instructor pedagogy. Meanwhile, science education at the K-12 level is undergoing significant changes as a result of the emphasis on scientific and engineering practices, crosscutting concepts, and disciplinary core ideas. This framework of “three-dimensional learning” is based on the literature about how people learn science and how we can help students put their knowledge to use. Recently, similar changes are underway in higher education by incorporating three-dimensional learning into college science courses. As these transformations move forward, it will become important to assess three-dimensional learning both to align assessments with the learning environment, and to assess the extent of the transformations. In this paper we introduce the Three-Dimensional Learning Assessment Protocol (3D-LAP), which is designed to characterize and support the development of assessment tasks in biology, chemistry, and physics that align with transformation efforts. We describe the development process used by our interdisciplinary team, discuss the validity and reliability of the protocol, and provide evidence that the protocol can distinguish between assessments that have the potential to elicit evidence of three-dimensional learning and those that do not. PMID:27606671

Characterizing College Science Assessments: The Three-Dimensional Learning Assessment Protocol.

Science.gov (United States)

Laverty, James T; Underwood, Sonia M; Matz, Rebecca L; Posey, Lynmarie A; Carmel, Justin H; Caballero, Marcos D; Fata-Hartley, Cori L; Ebert-May, Diane; Jardeleza, Sarah E; Cooper, Melanie M

2016-01-01

Many calls to improve science education in college and university settings have focused on improving instructor pedagogy. Meanwhile, science education at the K-12 level is undergoing significant changes as a result of the emphasis on scientific and engineering practices, crosscutting concepts, and disciplinary core ideas. This framework of "three-dimensional learning" is based on the literature about how people learn science and how we can help students put their knowledge to use. Recently, similar changes are underway in higher education by incorporating three-dimensional learning into college science courses. As these transformations move forward, it will become important to assess three-dimensional learning both to align assessments with the learning environment, and to assess the extent of the transformations. In this paper we introduce the Three-Dimensional Learning Assessment Protocol (3D-LAP), which is designed to characterize and support the development of assessment tasks in biology, chemistry, and physics that align with transformation efforts. We describe the development process used by our interdisciplinary team, discuss the validity and reliability of the protocol, and provide evidence that the protocol can distinguish between assessments that have the potential to elicit evidence of three-dimensional learning and those that do not.

HVI Ballistic Performance Characterization of Non-Parallel Walls

Science.gov (United States)

Bohl, William; Miller, Joshua; Christiansen, Eric

2012-01-01

The Double-Wall, "Whipple" Shield [1] has been the subject of many hypervelocity impact studies and has proven to be an effective shield system for Micro-Meteoroid and Orbital Debris (MMOD) impacts for spacecraft. The US modules of the International Space Station (ISS), with their "bumper shields" offset from their pressure holding rear walls provide good examples of effective on-orbit use of the double wall shield. The concentric cylinder shield configuration with its large radius of curvature relative to separation distance is easily and effectively represented for testing and analysis as a system of two parallel plates. The parallel plate double wall configuration has been heavily tested and characterized for shield performance for normal and oblique impacts for the ISS and other programs. The double wall shield and principally similar Stuffed Whipple Shield are very common shield types for MMOD protection. However, in some locations with many spacecraft designs, the rear wall cannot be modeled as being parallel or concentric with the outer bumper wall. As represented in Figure 1, there is an included angle between the two walls. And, with a cylindrical outer wall, the effective included angle constantly changes. This complicates assessment of critical spacecraft components located within outer spacecraft walls when using software tools such as NASA's BumperII. In addition, the validity of the risk assessment comes into question when using the standard double wall shield equations, especially since verification testing of every set of double wall included angles is impossible.

Promise assessment: A corollary to risk assessment for characterizing benefits

International Nuclear Information System (INIS)

Sholtis, J.A. Jr.

1993-01-01

Decisions involving the use of hazardous technologies are often made based on risk-benefit considerations. This is the case for U.S. space mission use of nuclear power and propulsion systems, where launch decisions are made within the office of the President. A great deal of time and effort is spent characterizing the risk for each nuclear-powered space mission. However, this is not so for benefits, even though they are no less important. To correct this situation, a new technical term--promise--is defined, and a new methodology--promise assessment--is proposed. This paper introduces and advances this concept, addresses its future application, as a tool, can be developed sufficiently and applied to methodically identify and characterized benefits. Further, it can introduce a degree of balance when judgments concerning the use of hazardous technologies are involved

Characterizing on-road driving performance in individuals with traumatic brain injury who pass or fail an on-road driving assessment.

Science.gov (United States)

Stolwyk, Renerus J; Charlton, Judith L; Ross, Pamela E; Bédard, Michel; Marshall, Shawn; Gagnon, Sylvain; Gooden, James R; Ponsford, Jennie L

2018-01-15

To characterise on-road driving performance in individuals with traumatic brain injury who fail on-road driving assessment, compared with both those who pass assessment and healthy controls, and the injury and cognitive factors associated with driving performance. Cross-sectional. Forty eight participants with traumatic brain injury (Age M = 40.50 SD = 14.62, 77% male, post-traumatic amnesia days M = 28.74 SD =27.68) and 48 healthy matched controls completed a standardised on-road driving assessment in addition to cognitive measures. Individuals with traumatic brain injury who passed on-road driving assessment performed no differently from controls while individuals with traumatic brain injury who failed the assessment demonstrated significantly worse driving performance relative to controls across a range of driving manoeuvres and error types including observation of on-road environment, speed control, gap selection, lane position, following distance and basic car control. Longer time post-injury and reduced visual perception were both significantly correlated with reduced driving skills. This exploratory study indicated that drivers with traumatic brain injury who failed on-road assessment demonstrated a heterogeneous pattern of impaired driving manoeuvres, characterised by skill deficits across both operational (e.g., basic car control and lane position) and tactical domains (e.g., following distance, gap selection, and observation) of driving. These preliminary findings can be used for implementation of future driving assessments and rehabilitation programs. Implications for rehabilitation Clinicians should be aware that the majority of individuals with traumatic brain injury were deemed fit to resume driving following formal on-road assessment, despite having moderate to very severe traumatic brain injuries. Drivers with traumatic brain injury who failed an on-road assessment demonstrated a heterogeneous pattern of impaired skills including errors

Gas condensate reservoir performance : part 1 : fluid characterization

Energy Technology Data Exchange (ETDEWEB)

Thomas, F.B.; Bennion, D.B. [Hycal Energy Research Laboratories Ltd., Calgary, AB (Canada); Andersen, G. [ChevronTexaco, Calgary, AB (Canada)

2006-07-01

Phase behaviour in gas condensate reservoirs is sensitive to changes in pressure and temperature, which can lead to significant errors in fluid characterization. The challenging task of characterizing in situ fluids in gas condensate reservoirs was discussed with reference to the errors that occur as a result of the complex coupling between phase behavior and geology. This paper presented techniques for reservoir sampling and characterization and proposed methods for minimizing errors. Errors are often made in the classification of dew point systems because engineering criteria does not accurately represent the phase behavior of the reservoir. For example, the fluid of a certain condensate yield may be categorized as a wet gas rather than a retrograde condensate fluid. It was noted that the liquid yield does not dictate whether the fluid is condensate or wet gas, but rather where the reservoir temperature is situated in the pressure temperature phase loop. In order to proceed with a viable field development plan and optimization, the reservoir fluid must be understood. Given that gas productivity decreases with liquid drop out in the near wellbore region, capillary pressure plays a significant role in retrograde reservoirs. It was noted that well understood parameters will lead to a better assessment of the amount of hydrocarbon in place, the rate at which the resource can be produced and optimization strategies as the reservoir matures. It was concluded that multi-rate sampling is the best method to use in sampling fluids since the liquid yield changes as a function of rate. Although bottom-hole sampling in gas condensate reservoirs may be problematic, it should always be performed to address any concerns for liquid-solid separation. Produced fluids typically reveal a specific signature that informs the operator of in situ properties. This paper presented examples that pertain to wet versus retrograde condensate behavior and the presence of an oil zone. The

Performance Objective for Tank Farm Closure Risk Assessments

International Nuclear Information System (INIS)

MANN, F.M.; KNEPP, A.J.; BADDEN, J.

2003-01-01

To be meaningful, results from a numeric risk assessment of the consequences of an action must be compared against the standards for such an action. That is, before one disposes of waste or closes a facility with waste, one must show that the disposal or closure action protects the public health and safety and the environment. These standards are called performance objectives. Regulations requiring performing performance assessments, (whether federal ones like the Department of Energy [DOE] Order 435.1, Radioactive Waste Management and its implementing guides or Washington State ones like the regulations implementing the Washington Administrative Code [WAC] 173-340 ''Model Toxics Control Act - Cleanup''), usually require that the determination of performance objectives be one of the first steps performed. These performance objectives not only set comparison level for the numeric results, but also define the media, pathways, exposure scenarios (receptors), spatial locations, and times that the performance assessment must consider. Thus, a performance objective consists of a compliance level, place(s) of compliance, and time(s) of compliance. Performance objectives are not the levels that a regulatory agency will enforce in a permit or authorization. Those levels, often called enforcement levels, will be set in the permit or authorization. Rather, performance objectives are those levels against which the results of the numeric simulation will be compared to judge the success of the proposed cleanup or disposal actions. Additional comparison levels may be requested for information purposes, but are not officially part of the decision on the adequacy of the proposed action. To emphasize that the performance objectives discussed in this document are not regulatory performance objectives, the three components of the performance objective will be renamed in this document as assessment standard, point(s) of assessment, and time(s) of assessment. However, whenever

Exploring the use of internal and externalcontrols for assessing microarray technical performance

Directory of Open Access Journals (Sweden)

Game Laurence

2010-12-01

Full Text Available Abstract Background The maturing of gene expression microarray technology and interest in the use of microarray-based applications for clinical and diagnostic applications calls for quantitative measures of quality. This manuscript presents a retrospective study characterizing several approaches to assess technical performance of microarray data measured on the Affymetrix GeneChip platform, including whole-array metrics and information from a standard mixture of external spike-in and endogenous internal controls. Spike-in controls were found to carry the same information about technical performance as whole-array metrics and endogenous "housekeeping" genes. These results support the use of spike-in controls as general tools for performance assessment across time, experimenters and array batches, suggesting that they have potential for comparison of microarray data generated across species using different technologies. Results A layered PCA modeling methodology that uses data from a number of classes of controls (spike-in hybridization, spike-in polyA+, internal RNA degradation, endogenous or "housekeeping genes" was used for the assessment of microarray data quality. The controls provide information on multiple stages of the experimental protocol (e.g., hybridization, RNA amplification. External spike-in, hybridization and RNA labeling controls provide information related to both assay and hybridization performance whereas internal endogenous controls provide quality information on the biological sample. We find that the variance of the data generated from the external and internal controls carries critical information about technical performance; the PCA dissection of this variance is consistent with whole-array quality assessment based on a number of quality assurance/quality control (QA/QC metrics. Conclusions These results provide support for the use of both external and internal RNA control data to assess the technical quality of microarray

Performance assessment - risk assessment vive la differences

International Nuclear Information System (INIS)

Nitschke, R.L.

1997-01-01

In the sister worlds of radioactive waste management disposal and environmental restoration, there are two similar processes and computational approaches for determining the acceptability of the proposed activities. While similar, these two techniques can lead to confusion and misunderstanding if the differences are not recognized and appreciated. In the case of radioactive waste management, the performance assessment process is used to determine compliance with certain prescribed 'performance objectives'. These objectives are designed to ensure that the disposal of radioactive (high-level, low-level, and/or transuranic) waste will be protective of human health and the environment. The environmental link is primarily through assuring protection of the groundwater as a resource. In the case of environmental restoration, the risk assessment process is used to determine the proper remedial action response, if any, for a past hazardous waste release. The process compares the 'no action' or 'leave as is' option with both carcinogenic and noncarcinogenic values for human health to determine the need for any action and to help to help determine just what the appropriate action would need to be. The impacts to the ecological system are evaluated in a slightly, different but similar fashion. Now the common objectives between these two processes notwithstanding. There are some key and fundamental differences that need to be answered that make direct comparisons or a common approach inappropriate. Failure to recognize this can lead to confusion and misunderstanding. This can be particularly problematic when one is faced with an active disposal facility located within the boundaries of an environmental restoration site as is the case at the Idaho National Engineering Laboratory (INEL). Through a critical evaluation of the performance assessment and risk assessment processes, highlighting both similarities and differences, it is hoped that greater understanding and appreciation

The Use of Numerical Models in Support of Site Characterization and Performance Assessment Studies of Geological Repositories. Results of an IAEA Coordinated Research Project 2005-2010

International Nuclear Information System (INIS)

2013-10-01

The siting, development and operation of waste disposal facilities, and the related safety issues, have been described in many IAEA publications. The safe management and disposal of radioactive waste from the nuclear fuel cycle remains a necessary condition for future development of nuclear energy. In particular, the disposal of high level waste and spent nuclear fuel in geological repositories, despite having been studied worldwide over the past several decades, still requires full scale demonstration through safe implementation, as planned at the national level in Finland and Sweden by 2020 and 2023, respectively, and in France by 2025. Safety assessment techniques are currently applicable to potential facility location and development through a quite large range of approaches and methodologies. By implementing research activities through coordinated research projects (CRPs), the IAEA enables research institutes in both developing and developed Member States to collaborate on research topics of common interest. In response to requests by several Member States in different networks and platforms dealing with waste disposal, in 2005 a CRP on The Use of Numerical Models in Support of Site Characterization and Performance Assessment Studies of Geological Repositories was proposed and developed to transfer modelling expertise and numerical simulation technology to countries needing them for their national nuclear waste management programmes. All Member States involved in this CRP have acquired the scientific basis for, and expertise in, the site characterization process, including test design, data analysis, model calibration, model validation, predictive modelling, sensitivity analysis and uncertainty propagation analysis. This expertise is documented in this publication, in which numerical modelling is used to address the pertinent issue of site characterization and its impact on safety, using data and information from a potential repository site

Performance objectives for the Hanford Immobilized Low-Activity Waste (ILAW) performance assessment

International Nuclear Information System (INIS)

MANN, F.M.

1999-01-01

Performance objectives for the disposal of low activity waste from Hanford Waste Tanks have been developed. These objectives have been based on DOE requirements, programmatic requirements, and public involvement. The DOE requirements include regulations that direct the performance assessment and are cited within the Radioactive Waste Management Order (DOE Order 435.1). Performance objectives for other DOE complex performance assessments have been included

Spent fuel as a waste form: Data needs to allow long term performance assessment under repository disposal conditions

International Nuclear Information System (INIS)

Oversby, V.M.

1986-12-01

Performance assessment calculations are required for high level waste repositories for a period of 10,000 years. The Siting Guidelines require a comparison of sites following site characterization and prior to final site selection to be made over a 100,000 year period. To perform the required calculations, a detailed knowledge of the physical and chemical processes that affect waste form performance will be needed for each site. This paper will review the factors that affect the release of radionuclides from spent fuel under repository conditions, summarize our present state of knowledge, and suggest areas where more work is needed to support the performance assessment calculations. 17 refs., 5 figs., 3 tabs

Characterization of beef cattle breeds by virtue of their performances ...

African Journals Online (AJOL)

young bulls of l6 breeds were obtained fiorn the National Beef Cattle Performance and Progeny Testing Scheme and used in this re-analysis to characterize ... breeds for their effective use in either straight breeding or cross- breeding programmes. ... Scheme as the only data source for breed characterization pur- poses.

Long-term characterization of residential runoff and assessing potential surrogates of fecal indicator organisms.

Science.gov (United States)

Reano, Dane C; Haver, Darren L; Oki, Lorence R; Yates, Marylynn V

2015-05-01

Investigations into the microbiological impacts of urban runoff on receiving water bodies, especially during storm conditions, have yielded general paradigms that influence runoff abatement and control management strategies. To determine whether these trends are present in other runoff sources, the physical, chemical, and microbiological components of residential runoff from eight neighborhoods in Northern and Southern California were characterized over the course of five years. Sampling occurred regularly and during storm events, resulting in 833 data sets. Analysis of runoff data assisted in characterizing residential runoff, elucidating differences between dry and storm conditions, and identifying surrogates capable of assessing microbiological quality. Results indicate that although microbial loading increases during storm events similar to urban runoff, annual microbial loading in these study sites principally occurs during dry conditions (24% storm, 76% dry). Generated artificial neural network and multiple linear regression models assessed surrogate performance by accurately predicting Escherichia coli concentrations from validation data sets (R(2) = 0.74 and 0.77, respectively), but required input from other fecal indicator organism (FIO) variables to maintain performance (R(2) = 0.27 and 0.18, respectively, without FIO). This long-term analysis of residential runoff highlights characteristics distinct from urban runoff and establishes necessary variables for determining microbiological quality, thus better informing future management strategies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Performance Assessment Strategy Plan for the Geologic Repository Program

International Nuclear Information System (INIS)

1990-01-01

Performance assessment is a major constituent of the program being conducted by the US Department of Energy (DOE) to develop a geologic repository. Performance assessment is the set of activities needed for quantitative evaluations to assess compliance with the performance requirements in the regulations for a geologic repository and to support the development of the repository. The strategy for these evaluations has been documented in the Performance Assessment Strategy Plan (DOE, 1989). The implementation of the performance assessment strategy is defined in this document. This paper discusses the scope and objectives of the implementation plan, the relationship of the plan to other program plans, summarizes the performance assessment areas and the integrated strategy of the performance assessment program. 1 fig., 3 tabs

Characterization and diversity assessment in coconut collections of ...

African Journals Online (AJOL)

SUBDIC

conservation. Therefore, the present study was undertaken with the aim to characterize morphological, biochemical and nut component traits and to assess the diversity among 24 exotic and six indigenous in coconut accessions conserved at World Coconut Germplasm. Centre (WCGC) in Andaman and Nicobar Islands ...

Preliminary melter performance assessment report

International Nuclear Information System (INIS)

Elliott, M.L.; Eyler, L.L.; Mahoney, L.A.; Cooper, M.F.; Whitney, L.D.; Shafer, P.J.

1994-08-01

The Melter Performance Assessment activity, a component of the Pacific Northwest Laboratory's (PNL) Vitrification Technology Development (PVTD) effort, was designed to determine the impact of noble metals on the operational life of the reference Hanford Waste Vitrification Plant (HWVP) melter. The melter performance assessment consisted of several activities, including a literature review of all work done with noble metals in glass, gradient furnace testing to study the behavior of noble metals during the melting process, research-scale and engineering-scale melter testing to evaluate effects of noble metals on melter operation, and computer modeling that used the experimental data to predict effects of noble metals on the full-scale melter. Feed used in these tests simulated neutralized current acid waste (NCAW) feed. This report summarizes the results of the melter performance assessment and predicts the lifetime of the HWVP melter. It should be noted that this work was conducted before the recent Tri-Party Agreement changes, so the reference melter referred to here is the Defense Waste Processing Facility (DWPF) melter design

Performance Assessment Institute-NV

Energy Technology Data Exchange (ETDEWEB)

Lombardo, Joesph [Univ. of Nevada, Las Vegas, NV (United States)

2012-12-31

The National Supercomputing Center for Energy and the Environment’s intention is to purchase a multi-purpose computer cluster in support of the Performance Assessment Institute (PA Institute). The PA Institute will serve as a research consortium located in Las Vegas Nevada with membership that includes: national laboratories, universities, industry partners, and domestic and international governments. This center will provide a one-of-a-kind centralized facility for the accumulation of information for use by Institutions of Higher Learning, the U.S. Government, and Regulatory Agencies and approved users. This initiative will enhance and extend High Performance Computing (HPC) resources in Nevada to support critical national and international needs in "scientific confirmation". The PA Institute will be promoted as the leading Modeling, Learning and Research Center worldwide. The program proposes to utilize the existing supercomputing capabilities and alliances of the University of Nevada Las Vegas as a base, and to extend these resource and capabilities through a collaborative relationship with its membership. The PA Institute will provide an academic setting for interactive sharing, learning, mentoring and monitoring of multi-disciplinary performance assessment and performance confirmation information. The role of the PA Institute is to facilitate research, knowledge-increase, and knowledge-sharing among users.

Energy performance assessment methodology

Energy Technology Data Exchange (ETDEWEB)

Platzer, W.J. [Fraunhofer Inst. for Solar Energy Systems, Freiburg (Germany)

2006-01-15

The energy performance of buildings are intimately connected to the energy performance of building envelopes. The better we understand the relation between the quality of the envelope and the energy consumption of the building, the better we can improve both. We have to consider not only heating but all service energies related to the human comfort in the building, such as cooling, ventilation, lighting as well. The complexity coming from this embracing approach is not to be underestimated. It is less and less possible to realted simple characteristic performance indicators of building envelopes (such as the U-value) to the overall energy performance. On the one hand much more paramters (e.g. light transmittance) come into the picture we have to assess the product quality in a multidimensional world. Secondly buildings more and more have to work on a narrow optimum: For an old, badly insulated building all solar gains are useful for a high-performance building with very good insulation and heat recovery systems in the ventilation overheating becomes more likely. Thus we have to control the solar gains, and sometimes we need high gains, sometimes low ones. And thirdly we see that the technology within the building and the user patterns and interactions as well influence the performance of a building envelope. The aim of this project within IEA Task27 was to improve our knowledge on the complex situation and also to give a principal approach how to assess the performance of the building envelope. The participants have contributed to this aim not pretending that we have reached the end. (au)

Subjective and objective performance assessment : Performance pay at Trelleborg Forsheda AB

OpenAIRE

Luotonen, David; Hasselström, Markus

2009-01-01

  The purpose of this thesis is to understand the opinions and potential effects of objective and subjective assessments of performance as a basis for performance pay for blue-collar workers. The study takes a qualitative approach to find out how and why four companies - Trelleborg Forsheda, Finnveden Powertrain, Isaberg Rapid and Parker Hannifin- work with salaries, incentive system and performance assessment the way they do. The concept of individual salary is central in this thesis, and in...

Gamma camera performance: technical assessment protocol

International Nuclear Information System (INIS)

Bolster, A.A.; Waddington, W.A.

1996-01-01

This protocol addresses the performance assessment of single and dual headed gamma cameras. No attempt is made to assess the performance of any associated computing systems. Evaluations are usually performed on a gamma camera commercially available within the United Kingdom and recently installed at a clinical site. In consultation with the manufacturer, GCAT selects the site and liaises with local staff to arrange a mutually convenient time for assessment. The manufacturer is encouraged to have a representative present during the evaluation. Three to four days are typically required for the evaluation team to perform the necessary measurements. When access time is limited, the team will modify the protocol to test the camera as thoroughly as possible. Data are acquired on the camera's computer system and are subsequently transferred to the independent GCAT computer system for analysis. This transfer from site computer to the independent system is effected via a hardware interface and Interfile data transfer. (author)

Gamma camera performance: technical assessment protocol

Energy Technology Data Exchange (ETDEWEB)

Bolster, A.A. [West Glasgow Hospitals NHS Trust, London (United Kingdom). Dept. of Clinical Physics; Waddington, W.A. [University College London Hospitals NHS Trust, London (United Kingdom). Inst. of Nuclear Medicine

1996-12-31

This protocol addresses the performance assessment of single and dual headed gamma cameras. No attempt is made to assess the performance of any associated computing systems. Evaluations are usually performed on a gamma camera commercially available within the United Kingdom and recently installed at a clinical site. In consultation with the manufacturer, GCAT selects the site and liaises with local staff to arrange a mutually convenient time for assessment. The manufacturer is encouraged to have a representative present during the evaluation. Three to four days are typically required for the evaluation team to perform the necessary measurements. When access time is limited, the team will modify the protocol to test the camera as thoroughly as possible. Data are acquired on the camera`s computer system and are subsequently transferred to the independent GCAT computer system for analysis. This transfer from site computer to the independent system is effected via a hardware interface and Interfile data transfer. (author).

Practical session assessments in human anatomy: Weightings and performance.

Science.gov (United States)

McDonald, Aaron C; Chan, Siew-Pang; Schuijers, Johannes A

2016-07-08

Assessment weighting within a given module can be a motivating factor for students when deciding on their commitment level and time given to study a specific topic. In this study, an analysis of assessment performances of second year anatomy students was performed over four years to determine if (1) students performed better when a higher weighting was given to a set of practical session assessments and (2) whether an improved performance in the practical session assessments had a carry-over effect on other assessment tasks within that anatomy module and/or other anatomy modules that follow. Results showed that increasing the weighting of practical session assessments improved the average mark in that assessment and also improved the percentage of students passing that assessment. Further, it significantly improved performance in the written end-semester examination within the same module and had a carry-over effect on the anatomy module taught in the next teaching period, as students performed better in subsequent practical session assessments as well as subsequent end-semester examinations. It was concluded that the weighting of assessments had significant influences on a student's performance in that, and subsequent, assessments. It is postulated that practical session assessments, designed to develop deep learning skills in anatomy, improved efficacy in student performance in assessments undertaken in that and subsequent anatomy modules when the weighting of these assessments was greater. These deep learning skills were also transferable to other methods of assessing anatomy. Anat Sci Educ 9: 330-336. © 2015 American Association of Anatomists. © 2015 American Association of Anatomists.

Site characterization and performance assessment for a low-level radioactive waste management site in the American Southwest

International Nuclear Information System (INIS)

Shott, G.J.; Sully, M.J.; Muller, C.J.; Hammermeister, D.P.; Ginanni, J.M.

1995-01-01

The Area 5 Radioactive Waste Management Site located in southern Nevada, has been used for the disposal of low-level radioactive waste since 1961. The site is located in the Mohave Desert of the American Southwest, an extremely arid region receiving as little as 0.1 m/yr of precipitation. Site characterization studies have measured the physical, hydrologic, and geochemical properties of core samples collected from 10 shallow boreholes and 3 deep boreholes that extend through the unsaturated zone to the uppermost aquifer. Results indicate that the unsaturated zone consists of 240 m of dry alluvial sediments and is remarkably uniform with respect to most physical parameters. Measurements of saturated hydraulic conductivity with depth showed no evidence of trends, layering, or anisotropy. Parameters for hydraulic functions were not highly variable and exhibited little trend with depth. Water potential profiles indicate that water movement in the upper alluvium is upward, except immediately following a precipitation event. Below the evaporative zone, the liquid flux was downward and of the same order of magnitude as the upward thermal vapor flux induced by the geothermal gradient. The extreme climatic conditions at the site reduce or eliminate many radionuclide release and transport mechanisms. Downward transport of radionuclides to the uppermost aquifer appears unlikely under current climatic conditions. Important radionuclide transport pathways appear to be limited to upward diffusion and advection of gases and biologically-mediated transport. Conceptual models of disposal site performance have been developed based on site characterization studies. The limited transport pathways and limited land use potential of the site provide reasonable assurance that regulatory performance objectives can be met

Performance assessment studies for the long-term safety evaluation of radioactive waste disposal facility

International Nuclear Information System (INIS)

Bujoreanu, D.; Olteanu, M.; Bujoreanu, L.

2008-01-01

Especially during the last ten years, a part of Romanian research program 'Management of Radioactive Waste and Spent Fuel' was focused mainly on applicative research for the design of near-surface disposal facility, which intends to accommodate the low and intermediate radioactive waste generated from Cernavoda NPP. In this frame, our contribution was at the acquisition of technical data for the characterization of the future disposal facility. In the present, the project of the disposal facility, located on the Saligny site, near Cernavoda NPP, must be licensed. As regards to the safe disposal, the location of final disposal, the Saligny site, has been characterized through the five geological formations which contain potential routes for transport of radionuclide released from disposal facility, in the receiving zones(potential receiving zones), into liquid and gaseous phases. The technical characteristics of the disposal facility were adapted at the Romanian disposal concept using the reference data from IAEA technical report (IAEA,1999). Input parameters which characterized from physical and chemical point of view the disposal system, were partially taken from literature. The performance assessment studies, which follows the preliminary design development phases and the selection, describes how the source term is affected by the infiltration of water through the disposal facility, degradation process of engineering barriers (reflected in the distribution coefficient values) and solubility limit. The studies regard the evaluation of the source term, sensitivity and uncertainty analysis provide the information on 'how' and 'why' were evaluated, following: (i) radiological safety assessment of near-surface disposal facility on Saligny site; (ii) complexity standard assessment of the Engineering Barriers Systems (EBS); (iii) identification of the elements which must be elaborated for the increase of the disposal safety and the necessity for new technical data for

Procedure for the characterization of radon potential in existing dwellings and to assess the annual average indoor radon concentration

International Nuclear Information System (INIS)

Collignan, Bernard; Powaga, Emilie

2014-01-01

Risk assessment due to radon exposure indoors is based on annual average indoor radon activity concentration. To assess the radon exposure in a building, measurement is generally performed during at least two months during heating period in order to be representative of the annual average value. This is because radon presence indoors could be very variable during time. This measurement protocol is fairly reliable but may be a limiting in the radon risk management, particularly during a real estate transaction due to the duration of the measurement and the limitation of the measurement period. A previous field study defined a rapid methodology to characterize radon entry in dwellings. The objective of this study was at first, to test this methodology in various dwellings to assess its relevance with a daily test. At second, a ventilation model was used to assess numerically the air renewal of a building, the indoor air quality all along the year and the annual average indoor radon activity concentration, based on local meteorological conditions, some building characteristics and in-situ characterization of indoor pollutant emission laws. Experimental results obtained on thirteen individual dwellings showed that it is generally possible to obtain a representative characterization of radon entry into homes. It was also possible to refine the methodology defined in the previous study. In addition, numerical assessments of annual average indoor radon activity concentration showed generally a good agreement with measured values. These results are encouraging to allow a procedure with a short measurement time to be used to characterize long-term radon potential in dwellings. - Highlights: • Test of a daily procedure to characterize radon potential in dwellings. • Numerical assessment of the annual radon concentration. • Procedure applied on thirteen dwellings, characterization generally satisfactory. • Procedure useful to manage radon risk in dwellings, for real

Enabling performance skills: Assessment in engineering education

Science.gov (United States)

Ferrone, Jenny Kristina

Current reform in engineering education is part of a national trend emphasizing student learning as well as accountability in instruction. Assessing student performance to demonstrate accountability has become a necessity in academia. In newly adopted criterion proposed by the Accreditation Board for Engineering and Technology (ABET), undergraduates are expected to demonstrate proficiency in outcomes considered essential for graduating engineers. The case study was designed as a formative evaluation of freshman engineering students to assess the perceived effectiveness of performance skills in a design laboratory environment. The mixed methodology used both quantitative and qualitative approaches to assess students' performance skills and congruency among the respondents, based on individual, team, and faculty perceptions of team effectiveness in three ABET areas: Communications Skills. Design Skills, and Teamwork. The findings of the research were used to address future use of the assessment tool and process. The results of the study found statistically significant differences in perceptions of Teamwork Skills (p performance skills, such as teamwork, among freshman engineering students; (2) incorporate feedback into the learning process; (3) strengthen the assessment process with a follow-up plan that specifically targets performance skill deficiencies, and (4) integrate the assessment instrument and practice with ongoing curriculum development. The findings generated by this study provides engineering departments engaged in assessment activity, opportunity to reflect, refine, and develop their programs as it continues. It also extends research on ABET competencies of engineering students in an under-investigated topic of factors correlated with team processes, behavior, and student learning.

Assessing Vocal Performances Using Analytical Assessment: A Case Study

Science.gov (United States)

Gynnild, Vidar

2016-01-01

This study investigated ways to improve the appraisal of vocal performances within a national academy of music. Since a criterion-based assessment framework had already been adopted, the conceptual foundation of an assessment rubric was used as a guide in an action research project. The group of teachers involved wanted to explore thinking…

Performance Assessment as a Diagnostic Tool for Science Teachers

Science.gov (United States)

Kruit, Patricia; Oostdam, Ron; van den Berg, Ed; Schuitema, Jaap

2018-04-01

Information on students' development of science skills is essential for teachers to evaluate and improve their own education, as well as to provide adequate support and feedback to the learning process of individual students. The present study explores and discusses the use of performance assessments as a diagnostic tool for formative assessment to inform teachers and guide instruction of science skills in primary education. Three performance assessments were administered to more than 400 students in grades 5 and 6 of primary education. Students performed small experiments using real materials while following the different steps of the empirical cycle. The mutual relationship between the three performance assessments is examined to provide evidence for the value of performance assessments as useful tools for formative evaluation. Differences in response patterns are discussed, and the diagnostic value of performance assessments is illustrated with examples of individual student performances. Findings show that the performance assessments were difficult for grades 5 and 6 students but that much individual variation exists regarding the different steps of the empirical cycle. Evaluation of scores as well as a more substantive analysis of students' responses provided insight into typical errors that students make. It is concluded that performance assessments can be used as a diagnostic tool for monitoring students' skill performance as well as to support teachers in evaluating and improving their science lessons.

Assigning probability distributions to input parameters of performance assessment models

Energy Technology Data Exchange (ETDEWEB)

Mishra, Srikanta [INTERA Inc., Austin, TX (United States)

2002-02-01

This study presents an overview of various approaches for assigning probability distributions to input parameters and/or future states of performance assessment models. Specifically,three broad approaches are discussed for developing input distributions: (a) fitting continuous distributions to data, (b) subjective assessment of probabilities, and (c) Bayesian updating of prior knowledge based on new information. The report begins with a summary of the nature of data and distributions, followed by a discussion of several common theoretical parametric models for characterizing distributions. Next, various techniques are presented for fitting continuous distributions to data. These include probability plotting, method of moments, maximum likelihood estimation and nonlinear least squares analysis. The techniques are demonstrated using data from a recent performance assessment study for the Yucca Mountain project. Goodness of fit techniques are also discussed, followed by an overview of how distribution fitting is accomplished in commercial software packages. The issue of subjective assessment of probabilities is dealt with in terms of the maximum entropy distribution selection approach, as well as some common rules for codifying informal expert judgment. Formal expert elicitation protocols are discussed next, and are based primarily on the guidance provided by the US NRC. The Bayesian framework for updating prior distributions (beliefs) when new information becomes available is discussed. A simple numerical approach is presented for facilitating practical applications of the Bayes theorem. Finally, a systematic framework for assigning distributions is presented: (a) for the situation where enough data are available to define an empirical CDF or fit a parametric model to the data, and (b) to deal with the situation where only a limited amount of information is available.

Assigning probability distributions to input parameters of performance assessment models

International Nuclear Information System (INIS)

Mishra, Srikanta

2002-02-01

This study presents an overview of various approaches for assigning probability distributions to input parameters and/or future states of performance assessment models. Specifically,three broad approaches are discussed for developing input distributions: (a) fitting continuous distributions to data, (b) subjective assessment of probabilities, and (c) Bayesian updating of prior knowledge based on new information. The report begins with a summary of the nature of data and distributions, followed by a discussion of several common theoretical parametric models for characterizing distributions. Next, various techniques are presented for fitting continuous distributions to data. These include probability plotting, method of moments, maximum likelihood estimation and nonlinear least squares analysis. The techniques are demonstrated using data from a recent performance assessment study for the Yucca Mountain project. Goodness of fit techniques are also discussed, followed by an overview of how distribution fitting is accomplished in commercial software packages. The issue of subjective assessment of probabilities is dealt with in terms of the maximum entropy distribution selection approach, as well as some common rules for codifying informal expert judgment. Formal expert elicitation protocols are discussed next, and are based primarily on the guidance provided by the US NRC. The Bayesian framework for updating prior distributions (beliefs) when new information becomes available is discussed. A simple numerical approach is presented for facilitating practical applications of the Bayes theorem. Finally, a systematic framework for assigning distributions is presented: (a) for the situation where enough data are available to define an empirical CDF or fit a parametric model to the data, and (b) to deal with the situation where only a limited amount of information is available

VISUAL ART TEACHERS AND PERFORMANCE ASSESSMENT ...

African Journals Online (AJOL)

Charles

qualitative research design; an aspect of descriptive survey research aiming at ... the competence and use of assessment strategies is determined by the type of ... Visual Art Teachers and Performance Assessment Methods in Nigerian Senior ...

Reduction of Specimen Size for the Full Simultaneous Characterization of Thermoelectric Performance

Science.gov (United States)

Vasilevskiy, D.; Simard, J.-M.; Masut, R. A.; Turenne, S.

2017-05-01

The successful implementation of thermoelectric (TE) materials for waste heat recovery depends strongly on our ability to increase their performance. This challenge continues to generate a renewed interest in novel high TE performance compounds. The technological difficulties in producing homogeneous ingots of new compounds or alloys with regular shape and a size sufficiently large to prepare several samples that are usually needed for a separate measurement of all TE parameters are well known. It creates a situation whereby material performance could be critically over- or under-evaluated at the first stages of the research process of a new material. Both cases would equally lead to negative consequences. Thus, minimizing the specimen size yet keeping it adequate for accurate material characterization becomes extremely important. In this work we report the experimental validation of reliable simultaneous measurements of the four most relevant TE parameters on a single bismuth telluride alloy based specimen of 4 mm × 4 mm × 1.4 mm in size. This translates in roughly 140 mg in weight for one of the heaviest TE materials, as was used in this study, and coefficient, electrical resistivity, thermal conductivity and the figure of merit were simultaneously assessed from 300 K to 440 K with increments of 20 K, 15 K, 10 K, 5 K, and 1 K. Our choice of a well-known homogeneous material has been made to increase measurement reliability and accuracy, but the results are expected to be valid for the full TE characterization of any unknown material. These results show a way to significantly decrease specimen sizes which has the potential to accelerate investigation of novel TE materials for large scale waste heat recovery.

Performance assessment strategy for low-level waste disposal sites

International Nuclear Information System (INIS)

Starmer, R.J.; Deering, L.G.; Weber, M.F.

1988-01-01

This paper describes US Nuclear Regulatory Commission (NRC) staff views on predicting the performance of low-level radioactive waste disposal facilities. Under the Atomic Energy Act, as amended, and the Low Level Radioactive Waste Policy Act, as amended, the NRC and Agreement States license land disposal of low-level radioactive waste (LLW) using the requirements in 10 CFR Part 61 or comparable state requirements. The purpose of this paper is to briefly describe regulatory requirements for performance assessment in low-level waste licensing, a strategy for performance assessments to support license applications, and NRC staff licensing evaluation of performance assessments. NRC's current activities in developing a performance assessment methodology will provide an overall systems modeling approach for assessing the performance of LLW disposal facilities. NRC staff will use the methodology to evaluate performance assessments conducted by applicants for LLW disposal facilities. The methodology will be made available to states and other interested parties

Probabilistic assessment of light water reactor fuel performance

International Nuclear Information System (INIS)

Misfeldt, I.

1978-10-01

A computer system for the statistical evaluation of LWR fuel performance has been developed. The computer code FRP, Fuel Reliability Predictor, calculates the distributions for parameters characterizing the fuel performance and failure probability. The statistical methods employed are either Monte Carlo simulations or low order Taylor approximation. Included in the computer system is a deterministic fuel performance code, which has been verified by comparison with data from irradiation experiments. The distributions for all material data utilized in the fuel simulations are estimations from the best available information in the literature. For the failure prediction, a stress corrosion failure criterion has been derived. The failure criterion is based on data from out-of-reactor stress corrosion experiments performed on unirradiated and irradiated zircaloy with iodine present. By means of an example the typical distributions of the variables characterizing the fuel performance and the accuracy of the methods themselves have been investigated. The application of the computer system is illustrated by a number of examples, these include the evaluation of irradiation experiments, design comparisons, and analyses of minor accidents. (author)

An overview of performance assessment methodology

International Nuclear Information System (INIS)

Hongnian Jow

2010-01-01

The definition of performance assessment (PA) within the context of a geologic repository program is a post-closure safety assessment; a system analysis of hazards associated with the facility and the ability of the site and the design of the facility to provide for the safety functions. For the last few decades, PA methodology bas been developed and applied to different waste disposal programs around the world. PA has been used in the safety analyses for waste disposal repositories for low-level waste, intermediate level waste, and high-level waste including spent nuclear fuels. This paper provides an overview of the performance assessment methodology and gives examples of its applications for the Yucca Mountain Project. (authors)

Performance success from self-assessments

International Nuclear Information System (INIS)

Hughes, G.

1996-01-01

This paper provides information on and successes of self-assessments completed at the Callaway plant. It stresses the vital needs and substantial benefits from these continual self-improvement efforts. The Callaway plant staff use a variety of methods and techniques to do self-assessments with the focus on performance outcomes. Self-assessments help Callaway focus on the priority issues and direct resources properly. Callaway's success has been due to this learning culture. The Callaway plant is a Westinghouse four-loop plant in the state of Missouri and has been operational since 1984

The implications of heterogeneity for repository performance assessments

International Nuclear Information System (INIS)

Jackson, C.P.; Porter, J.D.; Morris, S.T.; Herbert, A.W.

1991-01-01

We outline the current views of the Nirex Disposal Safety Assessment Team on heterogeneity, we describe the pragmatic approach to modelling the consequences of heterogeneity that is being currently used, we present work that is being undertaken in the Nirex Safety Assessment Research Programme to develop improved models and we discuss the implications of heterogeneity for site investigation. We point out the need to develop simple models for use in probabilistic analyses. Heterogeneity leads to dispersion, which is currently modelled using a simple diffusion-like model. We discuss the differences between structured heterogeneity, such as fracture zones, and random heterogeneity. We consider that the geostatistical approach to modelling random heterogeneity is probably that most suitable for the needs of Nirex. More measurements are needed in order to characterize heterogeneous media than to characterize homogeneous media. 18 refs., 4 figs

Performance assessment handbook for low-level radioactive waste disposal facilities

International Nuclear Information System (INIS)

Seitz, R.R.; Garcia, R.S.; Kostelnik, K.M.; Starmer, R.J.

1992-02-01

Performance assessments of proposed low-level radioactive waste disposal facilities must be conducted to support licensing. This handbook provides a reference document that can be used as a resource by management and staff responsible for performance assessments. Brief discussions describe the performance assessment process and emphasize selected critical aspects of the process. References are also provided for additional information on many aspects of the performance assessment process. The user's manual for the National Low-Level Waste Management Program's Performance Assessment Center (PAC) on the Idaho National Engineering Laboratory Cray computer is included as Appendix A. The PAC provides users an opportunity to experiment with a number of performance assessment computer codes on a Cray computer. Appendix B describes input data required for 22 performance assessment codes

Policy and Validity Prospects for Performance-Based Assessment.

Science.gov (United States)

Baker, Eva L.; And Others

1994-01-01

This article describes performance-based assessment as expounded by its proponents, comments on these conceptions, reviews evidence regarding the technical quality of performance-based assessment, and considers its validity under various policy options. (JDD)

Statistical multi-model approach for performance assessment of cooling tower

International Nuclear Information System (INIS)

Pan, Tian-Hong; Shieh, Shyan-Shu; Jang, Shi-Shang; Tseng, Wen-Hung; Wu, Chan-Wei; Ou, Jenq-Jang

2011-01-01

This paper presents a data-driven model-based assessment strategy to investigate the performance of a cooling tower. In order to achieve this objective, the operations of a cooling tower are first characterized using a data-driven method, multiple models, which presents a set of local models in the format of linear equations. Satisfactory fuzzy c-mean clustering algorithm is used to classify operating data into several groups to build local models. The developed models are then applied to predict the performance of the system based on design input parameters provided by the manufacturer. The tower characteristics are also investigated using the proposed models via the effects of the water/air flow ratio. The predicted results tend to agree well with the calculated tower characteristics using actual measured operating data from an industrial plant. By comparison with the design characteristic curve provided by the manufacturer, the effectiveness of cooling tower can be obtained in the end. A case study conducted in a commercial plant demonstrates the validity of proposed approach. It should be noted that this is the first attempt to assess the cooling efficiency which is deviated from the original design value using operating data for an industrial scale process. Moreover, the evaluated process need not interrupt the normal operation of the cooling tower. This should be of particular interest in industrial applications.

Organic migration forms of radionuclides and performance assessment

International Nuclear Information System (INIS)

Xu Gouqing

2010-01-01

Much attention is paid to inorganic migration forms of radionuclides in groundwater during performance assessment before and organic migration forms, are seldom noted. Therefore some question may come into confidence level in performance assessment. This paper mainly discusses the distribution of organic substances in groundwater and their potential effect on performance assessment. The results obtained in recent years show that clay rocks are generally impermeable to water, but in some cases the interstitial water may be observed in them and the concentration of DOC, HA and FA is rather higher than that in granitic groundwater. The concentration of DOC is relatively low in granitic groundwater, but up to now the effect of organic migration forms of radionuclides in granitic groundwater on performance assessment is not finally determined, it is necessary to make further investigations. (authors)

Diagnostic performance of digital breast tomosynthesis with a wide scan angle compared to full-field digital mammography for the detection and characterization of microcalcifications

International Nuclear Information System (INIS)

Clauser, Paola; Nagl, Georg; Helbich, Thomas H.; Pinker-Domenig, Katja; Weber, Michael; Kapetas, Panagiotis; Bernathova, Maria; Baltzer, Pascal A.T.

2016-01-01

Highlights: • Wide scan-angle DBT alone shows a high detection rate for microcalcifications. • DBT and FFDM can characterize microcalcifications at a comparable level. • Characterization is influenced by reader and by lesion type (benign vs malignant). • DBT might be used as a stand-alone technique for the assessment of microcalcifications. - Abstract: Objectives: To assess the diagnostic performance of digital breast tomosynthesis (DBT), with a wide scan-angle, compared to full-field digital mammography (FFDM), for the detection and characterization of microcalcifications. Methods: IRB approval was obtained for this retrospective study. We selected 150 FFDM and DBT (50 benign and 50 malignant histologically verified microcalcifications, 50 cases classified as BI-RADS 1). Four radiologists evaluated, in separate sessions and blinded to patients’ history and histology, the presence of microcalcifications. Cases with microcalcifications were assessed for visibility, characteristics, and grade of suspicion using BI-RADS categories. Detection rate and diagnostic performance were calculated. Visibility, lesions’ characteristics and reading time were analysed. Results: Detection rate and visibility were good for both FFDM and DBT, without intra-reader differences (P = 0.510). Inter-reader differences were detected (P < 0.018). Only two lesions were not detected by any reader on either FFDM or DBT. Diagnostic performance with DBT was as good as that of FFDM, but a significant inter-reader difference was found (P = 0.041). High inter-reader variability in the use of the descriptors was found. Reading time for DBT was almost twice that for FFDM (44 and 25 s, respectively). Conclusion: Wide scan-angle DBT enabled the detection and characterization of microcalcifications with no significant differences from FFDM. Inter-reader variability was seen.

Diagnostic performance of digital breast tomosynthesis with a wide scan angle compared to full-field digital mammography for the detection and characterization of microcalcifications

Energy Technology Data Exchange (ETDEWEB)

Clauser, Paola, E-mail: paola.clauser@meduniwien.ac.at [Department of Biomedical Imaging and Image-Guided Therapy, Division of Molecular and Gender Imaging, Medical University of Vienna, Waehringer Guertel 18-20, 1090 Vienna (Austria); Nagl, Georg [Department for Radiology and Interventional Radiology, Landesklinikum Horn, Spitalgasse 10, 3580 Horn (Austria); Helbich, Thomas H., E-mail: thomas.helbich@meduniwien.ac.at [Department of Biomedical Imaging and Image-Guided Therapy, Division of Molecular and Gender Imaging, Medical University of Vienna, Waehringer Guertel 18-20, 1090 Vienna (Austria); Pinker-Domenig, Katja [Department of Biomedical Imaging and Image-Guided Therapy, Division of Molecular and Gender Imaging, Medical University of Vienna, Waehringer Guertel 18-20, 1090 Vienna (Austria); Weber, Michael [Department of Biomedical Imaging and Image-Guided Therapy, Division of General and Pediatric Radiology, Medical University of Vienna, Waehringer Guertel 18-20, 1090 Vienna (Austria); Kapetas, Panagiotis; Bernathova, Maria; Baltzer, Pascal A.T. [Department of Biomedical Imaging and Image-Guided Therapy, Division of Molecular and Gender Imaging, Medical University of Vienna, Waehringer Guertel 18-20, 1090 Vienna (Austria)

2016-12-15

Highlights: • Wide scan-angle DBT alone shows a high detection rate for microcalcifications. • DBT and FFDM can characterize microcalcifications at a comparable level. • Characterization is influenced by reader and by lesion type (benign vs malignant). • DBT might be used as a stand-alone technique for the assessment of microcalcifications. - Abstract: Objectives: To assess the diagnostic performance of digital breast tomosynthesis (DBT), with a wide scan-angle, compared to full-field digital mammography (FFDM), for the detection and characterization of microcalcifications. Methods: IRB approval was obtained for this retrospective study. We selected 150 FFDM and DBT (50 benign and 50 malignant histologically verified microcalcifications, 50 cases classified as BI-RADS 1). Four radiologists evaluated, in separate sessions and blinded to patients’ history and histology, the presence of microcalcifications. Cases with microcalcifications were assessed for visibility, characteristics, and grade of suspicion using BI-RADS categories. Detection rate and diagnostic performance were calculated. Visibility, lesions’ characteristics and reading time were analysed. Results: Detection rate and visibility were good for both FFDM and DBT, without intra-reader differences (P = 0.510). Inter-reader differences were detected (P < 0.018). Only two lesions were not detected by any reader on either FFDM or DBT. Diagnostic performance with DBT was as good as that of FFDM, but a significant inter-reader difference was found (P = 0.041). High inter-reader variability in the use of the descriptors was found. Reading time for DBT was almost twice that for FFDM (44 and 25 s, respectively). Conclusion: Wide scan-angle DBT enabled the detection and characterization of microcalcifications with no significant differences from FFDM. Inter-reader variability was seen.

Personality, Assessment Methods and Academic Performance

Science.gov (United States)

Furnham, Adrian; Nuygards, Sarah; Chamorro-Premuzic, Tomas

2013-01-01

This study examines the relationship between personality and two different academic performance (AP) assessment methods, namely exams and coursework. It aimed to examine whether the relationship between traits and AP was consistent across self-reported versus documented exam results, two different assessment techniques and across different…

Integrated performance assessment model for waste package behavior and radionuclide release

International Nuclear Information System (INIS)

Kossik, R.; Miller, I.; Cunnane, M.

1992-01-01

Golder Associates Inc. (GAI) has developed a probabilistic total system performance assessment and strategy evaluation model (RIP) which can be applied in an iterative manner to evaluate repository site suitability and guide site characterization. This paper describes one component of the RIP software, the waste package behavior and radionuclide release model. The waste package component model considers waste package failure by various modes, matrix alteration/dissolution, and radionuclide mass transfer. Model parameters can be described as functions of local environmental conditions. The waste package component model is coupled to component models for far-field radionuclide transport and disruptive events. The model has recently been applied to the proposed repository at Yucca Mountain

Dehydration: physiology, assessment, and performance effects.

Science.gov (United States)

Cheuvront, Samuel N; Kenefick, Robert W

2014-01-01

This article provides a comprehensive review of dehydration assessment and presents a unique evaluation of the dehydration and performance literature. The importance of osmolality and volume are emphasized when discussing the physiology, assessment, and performance effects of dehydration. The underappreciated physiologic distinction between a loss of hypo-osmotic body water (intracellular dehydration) and an iso-osmotic loss of body water (extracellular dehydration) is presented and argued as the single most essential aspect of dehydration assessment. The importance of diagnostic and biological variation analyses to dehydration assessment methods is reviewed and their use in gauging the true potential of any dehydration assessment method highlighted. The necessity for establishing proper baselines is discussed, as is the magnitude of dehydration required to elicit reliable and detectable osmotic or volume-mediated compensatory physiologic responses. The discussion of physiologic responses further helps inform and explain our analysis of the literature suggesting a ≥ 2% dehydration threshold for impaired endurance exercise performance mediated by volume loss. In contrast, no clear threshold or plausible mechanism(s) support the marginal, but potentially important, impairment in strength, and power observed with dehydration. Similarly, the potential for dehydration to impair cognition appears small and related primarily to distraction or discomfort. The impact of dehydration on any particular sport skill or task is therefore likely dependent upon the makeup of the task itself (e.g., endurance, strength, cognitive, and motor skill). © 2014 American Physiological Society.

Performing the lockout/tagout risk assessment.

Science.gov (United States)

Wallace, W Jon

2007-03-01

Lockout/tagout provides the greatest level routine, repetitive, and integral to the production process, a risk assessment should be performed. If the task performed poses an unacceptable risk, acceptable risk reduction methods should be implemented to reduce the risk to acceptable levels.

Assessing Performance of Botswana’s Public Hospital System: The Use of the World Health Organization Health System Performance Assessment Framework

Directory of Open Access Journals (Sweden)

Onalenna Seitio-Kgokgwe

2014-09-01

Full Text Available Background Very few studies have assessed performance of Botswana public hospitals. We draw from a large research study assessing performance of the Botswana Ministry of Health (MoH to evaluate the performance of public hospital system using the World Health Organization Health Systems Performance Assessment Framework (WHO HSPAF. We aimed to evaluate performance of Botswana public hospital system; relate findings of the assessment to the potential for improvements in hospital performance; and determine the usefulness of the WHO HSPAF in assessing performance of hospital systems in a developing country. Methods This article is based on data collected from document analysis, 54 key informants comprising senior managers and staff of the MoH (N= 40 and senior officers from stakeholder organizations (N= 14, and surveys of 42 hospital managers and 389 health workers. Data from documents and transcripts were analyzed using content and thematic analysis while data analysis for surveys was descriptive determining proportions and percentages. Results The organizational structure of the Botswana’s public hospital system, authority and decision-making are highly centralized. Overall physical access to health services is high. However, challenges in the distribution of facilities and inpatient beds create inequities and inefficiencies. Capacity of the hospitals to deliver services is limited by inadequate resources. There are significant challenges with the quality of care. Conclusion While Botswana invested considerably in building hospitals around the country resulting in high physical access to services, the organization and governance of the hospital system, and inadequate resources limit service delivery. The ongoing efforts to decentralize management of hospitals to district level entities should be expedited. The WHO HSPAF enabled us to conduct a comprehensive assessment of the public hospital system. Though relatively new, this approach proved

Performance characterization of active fiber-composite actuators for helicopter rotor blade applications

Science.gov (United States)

Wickramasinghe, Viresh K.; Hagood, Nesbitt W.

2002-07-01

The primary objective of this work was to characterize the performance of the Active Fiber Composite (AFC) actuator material system for the Boeing Active Material Rotor (AMR) blade application. The AFCs were a new structural actuator system consisting of piezoceramic fibers embedded in an epoxy matrix and sandwiched between interdigitated electrodes to orient the driving electric field in the fiber direction to use the primary piezoelectric effect. These actuators were integrated directly into the blade spar laminate as active plies within the composite structure to perform structural actuation for vibration control in helicopters. Therefore, it was necessary to conduct extensive electromechanical material characterization to evaluate AFCs both as actuators and as structural components of the rotor blade. The characterization tests designed to extract important electromechanical properties under simulated blade operating conditions included stress-strain tests, free strain tests and actuation under tensile load tests. This paper presents the test results as well as the comprehensive testing process developed to evaluate the relevant AFC material properties. The results from this comprehensive performance characterization of the AFC material system supported the design and operation of the Boeing AMR blade scheduled for hover and forward flight wind tunnel tests.

Performance assessment for low-level radioactive waste disposal

International Nuclear Information System (INIS)

Cook, J.R.; Hsu, R.H.; Wilhite, E.L.; Yu, A.D.

1996-01-01

In October 1994 the Savannah River Site became the first US DOE complex to use concrete vaults to dispose of low-level radioactive solid waste and better prevent soil and groundwater contamination. This article describes the design and gives a performance assessment of the vaults. Topics include the following: Performance objectives; scope; the performance assessment process-assemble a multidisciplinary working group; collect available data; define credible pathways/scenarios; develop conceptual models; conduct screening and detailed model calculations; assess sensitivity/uncertainty; integrate and interpret results; report. 9 figs., 3 tabs

Conceptual structure of the 1996 performance assessment for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

HELTON, JON CRAIG; ANDERSON, D. RICHARD; BASABILVAZO, G.; JOW, HONG-NIAN; MARIETTA, MELVIN G.

2000-01-01

The conceptual structure of the 1996 performance assessment (PA) for the Waste Isolation Pilot Plant (WIPP) is described. This structure involves three basic entities (EN1, EN2, EN3): (1) EN1, a probabilistic characterization of the likelihood of different futures occurring at the WIPP site over the next 10,000 yr, (2) EN2, a procedure for estimating the radionuclide releases to the accessible environment associated with each of the possible futures that could occur at the WIPP site over the next 10,000 yr, and (3) EN3, a probabilistic characterization of the uncertainty in the parameters used in the definition of EN1 and EN2. In the formal development of the 1996 WIPP PA, EN1 is characterized by a probability space (S st , P st , p st ) for stochastic (i.e., aleatory) uncertainly; EN2 is characterized by a function (line i ntegral) that corresponds to the models and associated computer programs used to estimate radionuclide releases; and EN3 is characterized by a probability space (S su , P su , p su ) for subjective (i.e., epistemic) uncertainty. A high-level overview of the 1996 WIPP PA and references to additional sources of information are given in the context of (S st , P st , p st ), (line i ntegral) and (S su , P su , p su )

Site characterization in fractured crystalline rock

International Nuclear Information System (INIS)

Andersson, Peter; Andersson, J.E.; Gustafsson, E.; Nordqvist, R.; Voss, C.

1993-03-01

This report concerns a study which is part of the SKI performance assessment project SITE-94. SITE-94 is a performance assessment of a hypothetical repository at a real site. The main objective of the project is to determine how site specific data should be assimilated into the performance assessment process and to evaluate how uncertainties inherent in site characterization will influence performance assessment results. Other important elements of SITE-94 are the development of a practical and defensible methodology for defining, constructing and analyzing scenarios, the development of approaches for treatment of uncertainties, evaluation of canister integrity, and the development and application of an appropriate Quality Assurance plan for Performance Assessments. (111 refs.)

Development of a Risk-Based Probabilistic Performance-Assessment Method for Long-Term Cover Systems - 2nd Edition

International Nuclear Information System (INIS)

HO, CLIFFORD K.; ARNOLD, BILL W.; COCHRAN, JOHN R.; TAIRA, RANDAL Y.

2002-01-01

A probabilistic, risk-based performance-assessment methodology has been developed to assist designers, regulators, and stakeholders in the selection, design, and monitoring of long-term covers for contaminated subsurface sites. This report describes the method, the software tools that were developed, and an example that illustrates the probabilistic performance-assessment method using a repository site in Monticello, Utah. At the Monticello site, a long-term cover system is being used to isolate long-lived uranium mill tailings from the biosphere. Computer models were developed to simulate relevant features, events, and processes that include water flux through the cover, source-term release, vadose-zone transport, saturated-zone transport, gas transport, and exposure pathways. The component models were then integrated into a total-system performance-assessment model, and uncertainty distributions of important input parameters were constructed and sampled in a stochastic Monte Carlo analysis. Multiple realizations were simulated using the integrated model to produce cumulative distribution functions of the performance metrics, which were used to assess cover performance for both present- and long-term future conditions. Performance metrics for this study included the water percolation reaching the uranium mill tailings, radon gas flux at the surface, groundwater concentrations, and dose. Results from uncertainty analyses, sensitivity analyses, and alternative design comparisons are presented for each of the performance metrics. The benefits from this methodology include a quantification of uncertainty, the identification of parameters most important to performance (to prioritize site characterization and monitoring activities), and the ability to compare alternative designs using probabilistic evaluations of performance (for cost savings)

Assessment Training Effects on Student Assessment Skills and Task Performance in a Technology-Facilitated Peer Assessment

Science.gov (United States)

Liu, Xiongyi; Li, Lan

2014-01-01

This study examines the impact of an assessment training module on student assessment skills and task performance in a technology-facilitated peer assessment. Seventy-eight undergraduate students participated in the study. The participants completed an assessment training exercise, prior to engaging in peer-assessment activities. During the…

Total-system performance assessment for Yucca Mountain -- SNL second iteration (TSPA-1993)

International Nuclear Information System (INIS)

Wilson, M.L.; Barnard, R.W.; Gauthier, J.H.

1994-04-01

Sandia National Laboratories has completed the second iteration of the periodic total-system performance assessments (TSPA-93) for the Yucca Mountain Site Characterization Project (YMP). Scenarios describing expected conditions (aqueous and gaseous transport of contaminants) and low-probability events (human-intrusion drilling and volcanic intrusion) are modeled. The hydrologic processes modeled include estimates of the perturbations to ambient conditions caused by heating of the repository resulting from radioactive decay of the waste. TSPA-93 incorporates significant new detailed process modeling, including two- and three-dimensional modeling of thermal effects, groundwater flow in the saturated-zone aquifers, and gas flow in the unsaturated zone. Probabilistic analyses are performed for aqueous and gaseous flow and transport, human intrusion, and basaltic magmatic activity. Results of the calculations lead to a number of recommendations concerning studies related to site characterization. Primary among these are the recommendations to obtain better information on percolation flux at Yucca Mountain, on the presence or absence of flowing fractures, and on physical and chemical processes influencing gaseous flow. Near-field thermal and chemical processes, and waste-container degradation are also areas where additional investigations may reduce important uncertainties. Recommendations for repository and waste-package design studies are: (1) to evaluate the performance implications of large-size containers, and (2) to investigate in more detail the implications of high repository thermal power output on the adjacent host rock and on the spent fuel

Characterization uncertainty and its effects on models and performance

International Nuclear Information System (INIS)

Rautman, C.A.; Treadway, A.H.

1991-01-01

Geostatistical simulation is being used to develop multiple geologic models of rock properties at the proposed Yucca Mountain repository site. Because each replicate model contains the same known information, and is thus essentially indistinguishable statistically from others, the differences between models may be thought of as representing the uncertainty in the site description. The variability among performance measures, such as ground water travel time, calculated using these replicate models therefore quantifies the uncertainty in performance that arises from uncertainty in site characterization

The role of performance assessment in radioactive waste disposal

International Nuclear Information System (INIS)

Stenhouse, M.J.

1998-01-01

Performance assessment has many applications in the field of radioactive waste management, none more important than demonstrating the suitability of a particular repository system for waste disposal. The role of performance assessment in radioactive waste disposal is discussed with reference to assessments performed in civilian waste management programmes. The process is, however, relevant, and may be applied directly to the disposal of defence-related wastes. When used in an open and transparent manner, performance assessment is a powerful methodology not only for convincing the authorities of the safety of a disposal concept, but also for gaining the wider acceptance of the general public for repository siting. 26 refs

Small animal PET: aspects of performance assessment

International Nuclear Information System (INIS)

Weber, Simone; Bauer, Andreas

2004-01-01

Dedicated small animal positron emission tomography (PET) systems are increasingly prevalent in industry (e.g. for preclinical drug development) and biological research. Such systems permit researchers to perform animal studies of a longitudinal design characterised by repeated measurements in single animals. With the advent of commercial systems, scanners have become readily available and increasingly popular. As a consequence, technical specifications are becoming more diverse, making scanner systems less broadly applicable. The investigator has, therefore, to make a decision regarding which type of scanner is most suitable for the intended experiments. This decision should be based on gantry characteristics and the physical performance. The first few steps have been taken towards standardisation of the assessment of performance characteristics of dedicated animal PET systems, though such assessment is not yet routinely implemented. In this review, we describe current methods of evaluation of physical performance parameters of small animal PET scanners. Effects of methodologically different approaches on the results are assessed. It is underscored that particular attention has to be paid to spatial resolution, sensitivity, scatter fraction and count rate performance. Differences in performance measurement methods are described with regard to commercially available systems, namely the Concorde MicroPET systems P4 and R4 and the quad-HIDAC. Lastly, consequences of differences in scanner performance parameters are rated with respect to applications of small animal PET. (orig.)

Standardized assessment of infrared thermographic fever screening system performance

Science.gov (United States)

Ghassemi, Pejhman; Pfefer, Joshua; Casamento, Jon; Wang, Quanzeng

2017-03-01

Thermal modalities represent the only currently viable mass fever screening approach for outbreaks of infectious disease pandemics such as Ebola and SARS. Non-contact infrared thermometers (NCITs) and infrared thermographs (IRTs) have been previously used for mass fever screening in transportation hubs such as airports to reduce the spread of disease. While NCITs remain a more popular choice for fever screening in the field and at fixed locations, there has been increasing evidence in the literature that IRTs can provide greater accuracy in estimating core body temperature if appropriate measurement practices are applied - including the use of technically suitable thermographs. Therefore, the purpose of this study was to develop a battery of evaluation test methods for standardized, objective and quantitative assessment of thermograph performance characteristics critical to assessing suitability for clinical use. These factors include stability, drift, uniformity, minimum resolvable temperature difference, and accuracy. Two commercial IRT models were characterized. An external temperature reference source with high temperature accuracy was utilized as part of the screening thermograph. Results showed that both IRTs are relatively accurate and stable (<1% error of reading with stability of +/-0.05°C). Overall, results of this study may facilitate development of standardized consensus test methods to enable consistent and accurate use of IRTs for fever screening.

[Software for performing a global phenotypic and genotypic nutritional assessment].

Science.gov (United States)

García de Diego, L; Cuervo, M; Martínez, J A

2013-01-01

The nutritional assessment of a patient needs the simultaneous managing a extensive information and a great number of databases, as both aspects of the process of nutrition and the clinical situation of the patient are analyzed. The introduction of computers in the nutritional area constitutes an extraordinary advance in the administration of nutrition information, providing a complete assessment of nutritional aspects in a quick and easy way. To develop a computer program that can be used as a tool for assessing the nutritional status of the patient, the education of clinical staff, for epidemiological studies and for educational purposes. Based on a computer program which assists the health specialist to perform a full nutritional evaluation of the patient, through the registration and assessment of the phenotypic and genotypic features. The application provides nutritional prognosis based on anthropometric and biochemical parameters, images of states of malnutrition, questionnaires to characterize diseases, diagnostic criteria, identification of alleles associated with the development of specific metabolic illnesses and questionnaires of quality of life, for a custom actuation. The program includes, as part of the nutritional assessment of the patient, food intake analysis, design of diets and promotion of physical activity, introducing food frequency questionnaires, dietary recalls, healthy eating indexes, model diets, fitness tests, and recommendations, recalls and questionnaires of physical activity. A computer program performed under Java Swing, using SQLite database and some external libraries such as JfreeChart for plotting graphs. This brand new designed software is composed of five blocks categorized into ten modules named: Patients, Anthropometry, Clinical History, Biochemistry, Dietary History, Diagnostic (with genetic make up), Quality of life, Physical activity, Energy expenditure and Diets. Each module has a specific function which evaluates a

Development of Integrated Assessment Technology of Risk and Performance

International Nuclear Information System (INIS)

Yang, Jun Eon; Kang, Dae Il; Kang, Hyun Gook

2010-04-01

The main idea and contents are summarized as below 1) Development of new risk/performance assessment system innovating old labor-intensive risk assessment structure - New consolidated risk assessment technology from various hazard(flood, fire, seismic in NPP) - BOP model development for performance monitoring - Consolidated risk/performance management system for consistency and efficiency of NPP 2) Resolution technology for pending issues in PSA - Base technology for PSA of digital I and C system - Base technology for seismic PSA reflecting domestic seismic characteristics and aging effect - Uncertainty reduction technology for level 2 PSA and best estimation of containment failure frequency 3) Next generation risk/performance assessment technology - Human-induced error reduction technology for efficient operation of a NPP

Plans for characterization of salt sites

International Nuclear Information System (INIS)

Heim, G.E.; Matthews, S.C.; Kircher, J.F.; Kennedy, R.K.

1983-01-01

This basic salt site characterization program has been designed to provide the data required to support the design, performance assessment, and licensing of each of the principal project elements: the repository, the shafts, and the surface facilities. The work has been sequenced to meet the design and licensing schedule. It is anticipated that additional characterization activities will be performed to address site-specific considerations and to provide additional information to address questions which arise during the evaluation of characterization data. 3 figures, 3 tables

Comparative Assessment of Health Workers Performance and The ...

African Journals Online (AJOL)

Comparative Assessment of Health Workers Performance and The Performance ... had very high significant effect on performance of health workers which was independent of ... Keywords: Health Worker Performance Factors Hospitals Nigeria ...

Methodology for NDA performance assessment

International Nuclear Information System (INIS)

Cuypers, M.; Franklin, M.; Guardini, S.

1986-01-01

In the framework of the RandD programme of the Joint Research Centre of the Commission of the European Communities, a considerable effort is being dedicated to performance assessment of NDA techniques taking account of field conditions. By taking account of field conditions is meant measurement samples of the size encountered in practice and training which allows inspectors to design cost efficient verification plans for the real situations encountered in the field. Special laboratory facilities referred to as PERLA are being constructed for this purpose. These facilities will be used for measurement experiments and for training. In this paper, performance assessment is discussed under the headings of measurement capability and in-field effectiveness. Considerable emphasis is given to the role of method specific measurement error models. The authors outline the advantages of giving statistical error models a sounder basis in the physical phenomenology of the measurement method

Current perspectives on performance assessment at the NRC

International Nuclear Information System (INIS)

Coplan, S.M.; Eisenberg, N.A.; Federline, M.V.; Randall, J.D.

1992-01-01

The Nuclear Regulatory Commission (NRC) staff is engaging in a number of activities involving performance assessment in order to support NRC's program in high-level waste management. Broad areas of activity include: (1) reactive work responding to products and activities of the Department of Energy (DOE), (2) proactive work, including development of an independent performance assessment capability, development of guidance for DOE, support for technical and programmatic integration, (3) a program of regulatory research, and (4) participation in a number of international activities. As the U.S. high-level waste program continues to mature, performance assessment is seen as playing a more prominent role in evaluating safety and focussing technical activities

Fuel Aging in Storage and Transportation (FAST): Accelerated Characterization and Performance Assessment of the Used Nuclear Fuel Storage System

International Nuclear Information System (INIS)

McDeavitt, Sean

2016-01-01

This Integrated Research Project (IRP) was established to characterize key limiting phenomena related to the performance of used nuclear fuel (UNF) storage systems. This was an applied engineering project with a specific application in view (i.e., UNF dry storage). The completed tasks made use of a mixture of basic science and engineering methods. The overall objective was to create, or enable the creation of, predictive tools in the form of observation methods, phenomenological models, and databases that will enable the design, installation, and licensing of dry UNF storage systems that will be capable of containing UNF for extended period of time.

Fuel Aging in Storage and Transportation (FAST): Accelerated Characterization and Performance Assessment of the Used Nuclear Fuel Storage System

Energy Technology Data Exchange (ETDEWEB)

McDeavitt, Sean [Texas A & M Univ., College Station, TX (United States). Dept. of Nuclear Engineering

2016-08-02

This Integrated Research Project (IRP) was established to characterize key limiting phenomena related to the performance of used nuclear fuel (UNF) storage systems. This was an applied engineering project with a specific application in view (i.e., UNF dry storage). The completed tasks made use of a mixture of basic science and engineering methods. The overall objective was to create, or enable the creation of, predictive tools in the form of observation methods, phenomenological models, and databases that will enable the design, installation, and licensing of dry UNF storage systems that will be capable of containing UNF for extended period of time.

Some viewpoints on reference biospheres in Finnish performance assessments

International Nuclear Information System (INIS)

Rasilainen, K.; Kattilakoski, E.; Suolanen, V.; Vieno, T.; Vuori, S.

2002-01-01

Viewpoints are presented concerning biosphere studies in performance assessments of nuclear waste disposal. The points are based on experiences from several Finnish performance assessments. The latest performance assessment for spent fuel disposal, TILA-99, was considered in the Decision in Principle process for the site selection of the repository. The points given are also based on experiences from participation in international projects dealing with biosphere modelling, for instance BIOMOVS and BIOMASS. (author)

Hanford low-level tank waste interim performance assessment

International Nuclear Information System (INIS)

Mann, F.M.

1997-01-01

The Hanford Low-Level Tank Waste Interim Performance Assessment examines the long-term environmental and human health effects associated with the disposal of the low-level fraction of the Hanford single and double-shell tank waste in the Hanford Site 200 East Area. This report was prepared as a good management practice to provide needed information about the relationship between the disposal system design and performance early in the disposal system project cycle. The calculations in this performance assessment show that the disposal of the low-level fraction can meet environmental and health performance objectives

Assessing the Performance of Natural Resource Systems

Directory of Open Access Journals (Sweden)

Bruce Campbell

2002-01-01

Full Text Available Assessing the performance of management is central to natural resource management, in terms of improving the efficiency of interventions in an adaptive-learning cycle. This is not simple, given that such systems generally have multiple scales of interaction and response; high frequency of nonlinearity, uncertainty, and time lags; multiple stakeholders with contrasting objectives; and a high degree of context specificity. The importance of bounding the problem and preparing a conceptual model of the system is highlighted. We suggest that the capital assets approach to livelihoods may be an appropriate organizing principle for the selection of indicators of system performance. In this approach, five capital assets are recognized: physical, financial, social, natural, and human. A number of principles can be derived for each capital asset; indicators for assessing system performance should cover all of the principles. To cater for multiple stakeholders, participatory selection of indicators is appropriate, although when cross-site comparability is required, some generic indicators are suitable. Because of the high degree of context specificity of natural resource management systems, a typology of landscapes or resource management domains may be useful to allow extrapolation to broader systems. The problems of nonlinearities, uncertainty, and time lags in natural resource management systems suggest that systems modeling is crucial for performance assessment, in terms of deriving "what would have happened anyway" scenarios for comparison to the measured trajectory of systems. Given that a number of indicators are necessary for assessing performance, the question becomes whether these can be combined to give an integrative assessment. We explore five possible approaches: (1 simple additive index, as used for the Human Development Index; (2 derived variables (e.g., principal components as the indices of performance; (3 two-dimensional plots of

Performance Assessment Framework for Private Finance Initiative Projects in Malaysia

Directory of Open Access Journals (Sweden)

Lop Nor Suzila

2016-01-01

Full Text Available Private Finance Initiative (PFI is viewed as restructuring the previous privatisation concept in delivering value for money for the Malaysian public infrastructure. Among the restructuring efforts in the privatisation is specifying the standard assessment of private concessionaires’ performance through the execution of key performance indicators (KPIs where the private concessionaires’ performance is benchmarked against the government’s standard. KPIs have served as useful tools in assessing performance of PFI projects. However, there is still lacking on determination methods performed to define and measure this KPIs and the absence of guidelines or a framework is also an issue in the implementation of the PFI procurement in Malaysia. Therefore, the objectives of this paper is to investigate the notion of performance assessment model approaches globally (i.e. UK, China, Australia, Serbia and Malaysia and to identify direction for PFI performance assessment tools (KPIs to be practiced in Malaysia. Based on the consideration of these models, this research paper propose an initial framework of performance assessment for PFI projects in Malaysia. The framework is deliberate to cover the performance of PFI at the operation and maintenance phase. The outcomes of this paper can serve as a theoretical base for the development of comprehensive and effective performance assessment for PFI projects in Malaysia.

Performance Assessment for Pump-and-Treat Closure or Transition

Energy Technology Data Exchange (ETDEWEB)

Truex, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Christian D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Becker, Dave J. [U.S. Army Corps of Engineers Environmental and Munitions Center of Expertise, Huntsville, AL (United States); Lee, Michelle H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Nimmons, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-09-29

A structured performance assessment approach is useful to evaluate pump-and-treat (P&T) groundwater remediation, which has been applied at numerous sites. Consistent with the U.S. Environmental Protection Agency’s Groundwater Road Map, performance assessment during remedy implementation may be needed, and should consider remedy optimization, transition to alternative remedies, or remedy closure. In addition, a recent National Research Council study examined groundwater remediation at complex contaminated sites and concluded that it may be beneficial to evaluate remedy performance and the potential need for transition to alternative approaches at these sites. The intent of this document is to provide a structured approach for assessing P&T performance to support a decision to optimize, transition, or close a P&T remedy. The process presented in this document for gathering information and performing evaluations to support P&T remedy decisions includes use of decision elements to distinguish between potential outcomes of a remedy decision. Case studies are used to augment descriptions of decision elements and to illustrate each type of outcome identified in the performance assessment approach. The document provides references to resources for tools and other guidance relevant to conducting the P&T assessment.

Wetlands Assessment for site characterization, Advanced Neutron Source (ANS)

International Nuclear Information System (INIS)

Wade, M.C.; Socolof, M.L.

1994-10-01

This Wetlands Assessment has been prepared in accordance with the Department of Energy's (DOE) Code of Federal Regulations (CFR) 10 CFR 1022, Compliance with Floodplain/Wetlands Environmental Review Requirements, which established the policy and procedure for implementing Executive Order 11990, Protection of Wetlands. The proposed action is to conduct characterization activities in or near wetlands at the ANS site. The proposed action will covered under a Categorical Exclusion, therefore this assessment is being prepared as a separate document [10 CFR 1022.12(c)]. The purpose of this Wetlands Assessment is to fulfill the requirements of 10 CFR 1022.12(a) by describing the project, discussing the effects of the proposed action upon the wetlands, and considering alternatives to the proposed action

Strategic characterization of anti-drug antibody responses for the assessment of clinical relevance and impact.

Science.gov (United States)

Tatarewicz, Suzanna M; Mytych, Daniel T; Manning, Marta Starcevic; Swanson, Steven J; Moxness, Michael S; Chirmule, Narendra

2014-06-01

All therapeutic proteins have the potential to induce anti-drug antibodies (ADA). Clinically relevant ADA can impact efficacy and/or safety of a biological therapeutic. Immunogenicity assessment strategy evaluates binding and neutralizing ADA, and the need for additional characterization (e.g., epitope, titer and so on) is determined using a risk-based approach. The choice of characterization assays depends on the type, application and immunogenicity of the therapeutic. ADA characterization can impact the interpretation of the risk profile of a given therapeutic, and offers insight into opportunities for risk mitigation and management. This article describes common ADA characterization methods. Strategic assessment and characterization of clinically relevant ADA are discussed, in order to support clinical options for safe and effective patient care and disease management.

42 CFR 460.132 - Quality assessment and performance improvement plan.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Quality assessment and performance improvement plan... assessment and performance improvement plan. (a) Basic rule. A PACE organization must have a written quality assessment and performance improvement plan. (b) Annual review. The PACE governing body must review the plan...

Final Technical Report: Characterizing Emerging Technologies.

Energy Technology Data Exchange (ETDEWEB)

King, Bruce Hardison [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hansen, Clifford [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Stein, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Riley, Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gonzalez, Sigifredo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-12-01

The Characterizing Emerging Technologies project focuses on developing, improving and validating characterization methods for PV modules, inverters and embedded power electronics. Characterization methods and associated analysis techniques are at the heart of technology assessments and accurate component and system modeling. Outputs of the project include measurement and analysis procedures that industry can use to accurately model performance of PV system components, in order to better distinguish and understand the performance differences between competing products (module and inverters) and new component designs and technologies (e.g., new PV cell designs, inverter topologies, etc.).

DOE progress in assessing the long term performance of waste package materials

International Nuclear Information System (INIS)

Berusch, A.; Gause, E.

1987-01-01

Under the Nuclear Waste Policy Act of 1982 (NWPA)[1], the US Dept. of Energy (DOE) is conducting activities to select and characterize candidate sites suitable for the construction and operation of a geologic repository for the disposal of high-level nuclear wastes. DOE is funding three first repository projects: Basalt Waste Isolation Project, BWIP; Nevada Nuclear Waste Isolation Project, NNWSI; and Salt Repository Project Office, SRPO. It is essential in the licensing process that DOE demonstrate to the NRC that the long-term performance of the materials and design will be in compliance with the requirements of 10 CFR 60.113 on substantially complete containment within the waste packages for 300 to 1000 years and a controlled release rate from the engineered barrier system (EBS) for 10,000 years of 1 part in 10 5 per year for radionuclides present in defined quantities 100 years after permanent closure. Obviously, the time spans involved make it impractical to base the assessment of the long term performance of waste package materials on real time, prototypical testing. The assessment of performance will be implemented by the use of models that are supported by real time field and laboratory tests, monitoring, and natural analog studies. Each of the repository projects is developing a plan for demonstrating long-term waste package material performance depending on the particular materials and the package-perturbed, time-dependent environment under which the materials must function. An overview of progress in each of these activities for each of the projects is provided in the following

[Teaching performance assessment in Public Health employing three different strategies].

Science.gov (United States)

Martínez-González, Adrián; Moreno-Altamirano, Laura; Ponce-Rosas, Efrén Raúl; Martínez-Franco, Adrián Israel; Urrutia-Aguilar, María Esther

2011-01-01

The educational system depends upon the quality and performance of their faculty and should therefore be process of continuous improvement. To assess the teaching performance of the Public Health professors, at the Faculty of Medicine, UNAM through three strategies. Justification study. The evaluation was conducted under a mediational model through three strategies: students' opinion assessment, self-assessment and students' academic achievement. We applied descriptive statistics, Student t test, ANOVA and Pearson correlation. Twenty professors were evaluated from the Public Health department, representing 57% of all them who teach the subject. The professor's performance was highly valued self-assessment compared with assessment of student opinion, was confirmed by statistical analysis the difference was significant. The difference amongst the three evaluation strategies became more evident between self-assessment and the scores obtained by students in their academic achievement. The integration of these three strategies offers a more complete view of the teacher's performance quality. Academic achievement appears to be a more objective strategy for teaching performance assessment than students' opinion and self-assessment.

Integrated performance assessment model for waste policy package behavior and radionuclide release

International Nuclear Information System (INIS)

Kossik, R.; Miller, I.; Cunnane, M.

1992-01-01

Golder Associates Inc. (GAI) has developed a probabilistic total system performance assessment and strategy evaluation model (RIP) which can be applied in an iterative manner to evaluate repository site suitability and guide site characterization. This paper describes one component of the RIP software, the waste package behavior and radionuclide release model. The waste package component model considers waste package failure by various modes, matrix alteration/dissolution, and radionuclide mass transfer. Model parameters can be described as functions of local environmental conditions. The waste package component model is coupled to component models for far-field radionuclide transport and disruptive events. The model has recently been applied to the proposed repository at Yucca Mountain

ASSESSING STUDENT PERFORMANCE ON INTERPRETING THROUGH PEER-ASSESSMENT

Directory of Open Access Journals (Sweden)

Titik Ismailia

2017-12-01

Full Text Available As a part of translation interpreting is translating spoken discourse orally. It needs some requirements like ability to speak clearly, clarity, fluency, eye contact, and self-confidence. It also needs linguistic proficiency, analytical skill, listening and recall, interpersonal skills, ethical behaviour, speaking skills, cultural knowledge, and subject knowledge. Evaluating students performance on interpreting can be done through peer assessment. Peer- assessment is one of alternative assessment to grade the peers in group or individuals by commenting on and judging other students work. To do this process there is a join work between listening and speaking, and two students. The first student as a speaker and the second student as an interpreter. Both of them should do the same quality on speak clearly as a speaker and as an interpreter should able to listen and translating the spoken discourse orally. Evaluation can use analytical grade that allows teacher to set clear criteria for correction like fluency, grammar, terminology, general content, and mechanics. Students and teacher can give comment on every criteria based on their own competency. During the process on making criteria, students and teacher can discuss and give reasonable suggestion to make the assessment suitable to the students competency. At the end, a rubric of assessment with the score from 0 to 100 and criteria and also the comment included in the paper of assessment.

Waste package performance assessment

International Nuclear Information System (INIS)

Lester, D.H.

1981-01-01

This paper describes work undertaken to assess the life-expectancy and post-failure nuclide release behavior of high-level and waste packages in a geologic repository. The work involved integrating models of individual phenomena (such as heat transfer, corrosion, package deformation, and nuclide transport) and using existing data to make estimates of post-emplacement behavior of waste packages. A package performance assessment code was developed to predict time to package failure in a flooded repository and subsequent transport of nuclides out of the leaking package. The model has been used to evaluate preliminary package designs. The results indicate, that within the limitation of model assumptions and data base, packages lasting a few hundreds of years could be developed. Very long lived packages may be possible but more comprehensive data are needed to confirm this

Characterization of the Effect of Wing Surface Instrumentation on UAV Airfoil Performance

Science.gov (United States)

Ratnayake, Nalin A.

2009-01-01

Recently proposed flight research at NASA Dryden Flight Research Center (DFRC) has prompted study into the aerodynamic effects of modifications made to the surfaces of laminar airfoils. The research is focused on the high-aspect ratio, laminar-flow type wings commonly found on UAVs and other aircraft with a high endurance requirement. A broad range of instrumentation possibilities, such as structural, pressure, and temperature sensing devices may require the alteration of the airfoil outer mold line as part of the installation process. This study attempts to characterize the effect of installing this additiona1 instrumentation on key airfoil performance factors, such as transition location, lift and drag curves, and stall point. In particular, the general case of an airfoil that is channeled in the spanwise direction is considered, and the impact on key performance characteristics is assessed. Particular attention is focused on exploring the limits of channel depth and low-Reynolds number on performance and stall characteristics. To quantify the effect of increased skin friction due to premature transition caused by protruding or recessed instrumentation, two simplified, conservative scenarios are used to consider two potential sources of diaturbance: A) that leading edge alterations would cause linearly expanding areas (triangles) of turbulent flow on both surfaces of the wing upstream of the natural transition point, and B) that a channel or bump on the upper surface would trip turbulent flow across the whole upper surface upstream of the natural transition point. A potentially more important consideration than the skin friction drag increment is the change in overall airfoil performance due to the installation of instrumentation along most of the wingspan. To quantify this effect, 2D CFD simulations of the flow over a representative mid-span airfoil section were conducted in order to assess the change in lift and drag curves for the airfoil in the presence of

Stochastic hydrogeologic units and hydrogeologic properties development for total-system performance assessments. Yucca Mountain Site Characterization Project

International Nuclear Information System (INIS)

Schenker, A.R.; Guerin, D.C.; Robey, T.H.; Rautman, C.A.; Barnard, R.W.

1995-09-01

A stochastic representation of the lithologic units and associated hydrogeologic parameters of the potential high-level nuclear waste repository are developed for use in performance-assessment calculations, including the Total-System Performance Assessment for Yucca Mountain-SNL Second Iteration (TSPA-1993). A simplified lithologic model has been developed based on the physical characteristics of the welded and nonwelded units at Yucca Mountain. Ten hydrogeologic units are developed from site-specific data (lithologic and geophysical logs and core photographs) obtained from the unsaturated and saturated zones. The three-dimensional geostatistical model of the ten hydrogeologic units is based on indicator-coding techniques and improves on the two-dimensional model developed for TSPA91. The hydrogeologic properties (statistics and probability distribution functions) are developed from the results of laboratory tests and in-situ aquifer tests or are derived through fundamental relationships. Hydrogeologic properties for matrix properties, bulk conductivities, and fractures are developed from existing site specific data. Extensive data are available for matrix porosity, bulk density, and matrix saturated conductivity. For other hydrogeologic properties, the data are minimal or nonexistent. Parameters for the properties are developed as beta probability distribution functions. For the model units without enough data for analysis, parameters are developed as analogs to existing units. A relational, analytic approach coupled with bulk conductivity parameters is used to develop fracture parameters based on the smooth-wall-parallel-plate theory. An analytic method is introduced for scaling small-core matrix properties to the hydrogeologic unit scales

Preliminary plan for disposal-system characterization and long-term performance evaluation of the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Bertram-Howery, S.G.; Hunter, R.L.

1989-04-01

The US Department of Energy is planning to dispose of transuranic wastes at the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico. Sandia National Laboratories is responsible for evaluating the compliance of the WIPP with the Environmental Protection Agency's Environmental Standards for the Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes (40 CFR 191, Subpart B). This plan has been developed to present the issues that will be addressed before compliance can be evaluated. These issues examine the procedural nature of the Standard, and the technical requirements for further characterizing the behavior of the disposal system, including uncertainties, to support the compliance assessment. The plan briefly describes the activities that will be conducted prior to 1993 by Sandia to characterize the WIPP disposal system's behavior and predict its performance. 41 refs., 35 figs., 21 tabs

ASPECT (Automated System-level Performance Evaluation and Characterization Tool), Phase II

Data.gov (United States)

National Aeronautics and Space Administration — SSCI has developed a suite of SAA tools and an analysis capability referred to as ASPECT (Automated System-level Performance Evaluation and Characterization Tool)....

Initial performance assessment of the disposal of spent nuclear fuel and high-level waste stored at Idaho National Engineering Laboratory

International Nuclear Information System (INIS)

Rechard, R.P.

1993-12-01

This performance assessment characterized plausible treatment options conceived by the Idaho National Engineering Laboratory (INEL) for its spent fuel and high-level radioactive waste and then modeled the performance of the resulting waste forms in two hypothetical, deep, geologic repositories: one in bedded salt and the other in granite. The results of the performance assessment are intended to help guide INEL in its study of how to prepare wastes and spent fuel for eventual permanent disposal. This assessment was part of the Waste Management Technology Development Program designed to help the US Department of Energy develop and demonstrate the capability to dispose of its nuclear waste. Although numerous caveats must be placed on the results, the general findings were as follows: Though the waste form behavior depended upon the repository type, all current and proposed waste forms provided acceptable behavior in the salt and granite repositories

Characterization of Dentine to Assess Bond Strength of Dental Composites

Directory of Open Access Journals (Sweden)

Saad Liaqat

2015-04-01

Full Text Available This study was performed to develop alternating dentine adhesion models that could help in the evaluation of a self-bonding dental composite. For this purpose dentine from human and ivory was characterized chemically and microscopically before and after acid etching using Raman and SEM. Mechanical properties of dentine were determined using 3 point bend test. Composite bonding to dentine, with and without use of acid pre-treatment and/or the adhesive, were assessed using a shear bond test. Furthermore, micro gap formation after restoration of 3 mm diameter cavities in dentine was assessed by SEM. Initial hydroxyapatite level in ivory was half that in human dentine. Surface hydroxyapatites decreased by approximately half with every 23 s of acid etch. The human dentine strength (56 MPa was approximately double that of ivory, while the modulus was almost comparable to that of ivory. With adhesive use, average shear bond strengths were 30 and 26 MPa with and without acid etching. With no adhesive, average bond strength was 6 MPa for conventional composites. This, however, increased to 14 MPa with a commercial flowable “self–bonding” composite or upon addition of low levels of an acidic monomer to the experimental composite. The acidic monomer additionally reduced micro-gap formation with the experimental composite. Improved bonding and mechanical properties should reduce composite failures due to recurrent caries or fracture respectively.

Repository Integration Program: RIP performance assessment and strategy evaluation model theory manual and user's guide

International Nuclear Information System (INIS)

1995-11-01

This report describes the theory and capabilities of RIP (Repository Integration Program). RIP is a powerful and flexible computational tool for carrying out probabilistic integrated total system performance assessments for geologic repositories. The primary purpose of RIP is to provide a management tool for guiding system design and site characterization. In addition, the performance assessment model (and the process of eliciting model input) can act as a mechanism for integrating the large amount of available information into a meaningful whole (in a sense, allowing one to keep the ''big picture'' and the ultimate aims of the project clearly in focus). Such an integration is useful both for project managers and project scientists. RIP is based on a '' top down'' approach to performance assessment that concentrates on the integration of the entire system, and utilizes relatively high-level descriptive models and parameters. The key point in the application of such a ''top down'' approach is that the simplified models and associated high-level parameters must incorporate an accurate representation of their uncertainty. RIP is designed in a very flexible manner such that details can be readily added to various components of the model without modifying the computer code. Uncertainty is also handled in a very flexible manner, and both parameter and model (process) uncertainty can be explicitly considered. Uncertainty is propagated through the integrated PA model using an enhanced Monte Carlo method. RIP must rely heavily on subjective assessment (expert opinion) for much of its input. The process of eliciting the high-level input parameters required for RIP is critical to its successful application. As a result, in order for any project to successfully apply a tool such as RIP, an enormous amount of communication and cooperation must exist between the data collectors, the process modelers, and the performance. assessment modelers

VISUAL ART TEACHERS AND PERFORMANCE ASSESSMENT ...

African Journals Online (AJOL)

Charles

Senior Secondary school visual art teachers constituted the sample of this ... and Performance Assessment Methods in Nigerian Senior Secondary Schools – Bello .... definition includes knowledge, skills, attitudes, metacognition and strategic ...

ANALYSING PERFORMANCE ASSESSMENT IN PUBLIC SERVICES: HOW USEFUL IS THE CONCEPT OF A PERFORMANCE REGIME?

Science.gov (United States)

Martin, Steve; Nutley, Sandra; Downe, James; Grace, Clive

2016-03-01

Approaches to performance assessment have been described as 'performance regimes', but there has been little analysis of what is meant by this concept and whether it has any real value. We draw on four perspectives on regimes - 'institutions and instruments', 'risk regulation regimes', 'internal logics and effects' and 'analytics of government' - to explore how the concept of a multi-dimensional regime can be applied to performance assessment in public services. We conclude that the concept is valuable. It helps to frame comparative and longitudinal analyses of approaches to performance assessment and draws attention to the ways in which public service performance regimes operate at different levels, how they change over time and what drives their development. Areas for future research include analysis of the impacts of performance regimes and interactions between their visible features (such as inspections, performance indicators and star ratings) and the veiled rationalities which underpin them.

Consideration of liners and covers in performance assessments

Energy Technology Data Exchange (ETDEWEB)

Phifer, Mark A. [Savannah River National Laboratory, Aiken, SC (United States); Seitz, Robert R. [Savannah River National Laboratory, Aiken, SC (United States); Suttora, Linda C. [USDOE Enviromental Management, Washington, DC (United States)

2014-09-18

On-site disposal cells are in use and being considered at several United States Department of Energy (USDOE) sites as the final disposition for large amounts of waste associated with cleanup of contaminated areas and facilities. These disposal cells are typically regulated by States and/or the U.S. Environmental Protection Agency under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) in addition to having to comply with requirements in DOE Order 435.1, Radioactive Waste Management due to the radioactive waste. The USDOE-Environmental Management Office of Site Restoration formed a working group to foster improved communication and sharing of information for personnel associated with these CERCLA disposal cells and work towards more consistent assumptions, as appropriate, for technical and policy considerations related to CERCLA risk assessments and DOE Order 435.1 performance assessments in support of a Record of Decision and Disposal Authorization Statement, respectively. One of the issues considered by the working group, which is addressed in this report, was how to appropriately consider the performance of covers and liners/leachate collections systems in the context of a DOE Order 435.1 performance assessment (PA). This same information may be appropriate for consideration within CERCLA risk assessments for these facilities. These OSDCs are generally developed to meet hazardous waste (HW) disposal design standards under the Resource Conservation and Recovery Act (RCRA) as well as the DOE Order 435.1 performance based standards for disposal of radioactive waste. To meet the standards for HW, the facilities typically include engineered covers and liner/leachate collection systems. Thus, when considering such facilities in the context of a DOE Order 435.1 PA, there is a need to address the evolution of performance of covers and liner/leachate collection systems in the context of meeting a performance standard considering time

Quantitative assessment of safety barrier performance in the prevention of domino scenarios triggered by fire

International Nuclear Information System (INIS)

Landucci, Gabriele; Argenti, Francesca; Tugnoli, Alessandro; Cozzani, Valerio

2015-01-01

The evolution of domino scenarios triggered by fire critically depends on the presence and the performance of safety barriers that may have the potential to prevent escalation, delaying or avoiding the heat-up of secondary targets. The aim of the present study is the quantitative assessment of safety barrier performance in preventing the escalation of fired domino scenarios. A LOPA (layer of protection analysis) based methodology, aimed at the definition and quantification of safety barrier performance in the prevention of escalation was developed. Data on the more common types of safety barriers were obtained in order to characterize the effectiveness and probability of failure on demand of relevant safety barriers. The methodology was exemplified with a case study. The results obtained define a procedure for the estimation of safety barrier performance in the prevention of fire escalation in domino scenarios. - Highlights: • We developed a methodology for the quantitative assessment of safety barriers. • We focused on safety barriers aimed at preventing domino effect triggered by fire. • We obtained data on effectiveness and availability of the safety barriers. • The methodology was exemplified with a case study of industrial interest. • The results showed the role of safety barriers in preventing fired domino escalation

TURVA-2012: Performance assessment

International Nuclear Information System (INIS)

Hellae, Pirjo; Snellman, Margit; Marcos, Nuria; Pastina, Barbara; Smith, Paul; Koskinen, Kari

2014-01-01

TURVA-2012 is Posiva's safety case in support of the Preliminary Safety Analysis Report (PSAR) and application for a construction licence for a repository for disposal of spent nuclear fuel at the Olkiluoto site in south-western Finland. Posiva's safety concept is based on long-term isolation and containment, which is achieved through a robust engineered barrier system (EBS) design and favourable geological conditions at the repository site. The reference design considered in the TURVA-2012 safety case is the KBS-3V design, with the EBS consisting of a copper-iron canister, a buffer of swelling clay material, a backfill in the deposition tunnels of low-permeability material and closure of the central tunnels and other underground openings. The host rock acts as a natural barrier. Each barrier contributes to safety through one or more safety function. The conditions needed for the barriers to fulfil their respective safety functions are expressed in terms of performance targets for the EBS and the target properties for the host rock. The performance assessment (Posiva, 2013), which is a key component of TURVA-2012, analyses the ability of the repository system to provide containment and isolation of the spent nuclear fuel during the long-term evolution of the system and the site. The conditions needed for the barriers to fulfil their respective safety functions are expressed in terms of performance targets for the engineered barriers and target properties for the host rock, for example properties related to the corrosion resistance and mechanical strength of the canister as well as groundwater flow and composition. The analyses take into account the uncertainties in the initial state, the subsequent thermal, hydraulic, mechanical and chemical evolution of the repository system and uncertainties in the evolution. The conclusions of the performance assessment are based mostly on the output of key modelling activities. Whenever modelling is not possible the conclusions

Assessing irrigation performance by using remote sensing

NARCIS (Netherlands)

Bandara, K.M.P.S.

2006-01-01

Keywords: Performance indicators, performance assessment, diagnostic approach, SEBAL, target level, grain yield, water productivity, error estimation, spatio-temporal resolution.

In

Incorrect Weighting of Absolute Performance in Self-Assessment

Science.gov (United States)

Jeffrey, Scott A.; Cozzarin, Brian

Students spend much of their life in an attempt to assess their aptitude for numerous tasks. For example, they expend a great deal of effort to determine their academic standing given a distribution of grades. This research finds that students use their absolute performance, or percentage correct as a yardstick for their self-assessment, even when relative standing is much more informative. An experiment shows that this reliance on absolute performance for self-evaluation causes a misallocation of time and financial resources. Reasons for this inappropriate responsiveness to absolute performance are explored.

Performance assessment for underground radioactive waste disposal systems

International Nuclear Information System (INIS)

1985-01-01

A waste disposal system comprises a number of subsystems and components. The performance of most systems can be demonstrated only indirectly because of the long period that would be required to test them. This report gives special attention to performance assessment of subsystems within the total waste disposal system, and is an extension of an IAEA report on Safety Assessment for the Underground Disposal of Radioactive Wastes

Uncertainty characterization approaches for risk assessment of DBPs in drinking water: a review.

Science.gov (United States)

Chowdhury, Shakhawat; Champagne, Pascale; McLellan, P James

2009-04-01

The management of risk from disinfection by-products (DBPs) in drinking water has become a critical issue over the last three decades. The areas of concern for risk management studies include (i) human health risk from DBPs, (ii) disinfection performance, (iii) technical feasibility (maintenance, management and operation) of treatment and disinfection approaches, and (iv) cost. Human health risk assessment is typically considered to be the most important phase of the risk-based decision-making or risk management studies. The factors associated with health risk assessment and other attributes are generally prone to considerable uncertainty. Probabilistic and non-probabilistic approaches have both been employed to characterize uncertainties associated with risk assessment. The probabilistic approaches include sampling-based methods (typically Monte Carlo simulation and stratified sampling) and asymptotic (approximate) reliability analysis (first- and second-order reliability methods). Non-probabilistic approaches include interval analysis, fuzzy set theory and possibility theory. However, it is generally accepted that no single method is suitable for the entire spectrum of problems encountered in uncertainty analyses for risk assessment. Each method has its own set of advantages and limitations. In this paper, the feasibility and limitations of different uncertainty analysis approaches are outlined for risk management studies of drinking water supply systems. The findings assist in the selection of suitable approaches for uncertainty analysis in risk management studies associated with DBPs and human health risk.

Assessment of NDE Technologies for Detection and Characterization of Stress Corrosion Cracking in LWRs

Energy Technology Data Exchange (ETDEWEB)

Meyer, Ryan M.; Ramuhalli, Pradeep; Toloczko, Mychailo B.; Bond, Leonard J.; Montgomery, Robert O.

2012-12-31

Stress corrosion cracking (SCC) in light water reactors (LWRs) has been a persistent form of degradation in the nuclear industry. Examples of SCC can be found for a range of materials in boiling and pressurized water reactor environments, including carbon steels, stainless steels, and nickel-base stainless alloys. The evolution of SCC is often characterized by a long initiation stage followed by a phase of more rapid crack growth to failure. This provides a relatively short window of opportunity to detect the start of observable SCC, and it is conceivable that SCC could progress from initiation to failure between subsequent examinations when managed by applying periodic in-service inspection techniques. Implementation of advanced aging management paradigms in the current fleet of LWRs will require adaptation of existing measurement technologies and development of new technologies to perform on-line measurements during reactor operation to ensure timely detection of material degradation and to support the implementation of advanced diagnostics and prognostics. This paper considers several non-destructive examination (NDE) technologies with known sensitivity to detection of indicators for SCC initiation and/or propagation, and assesses these technologies with respect to their ability to detect and accurately characterize the significance of an SCC flaw. Potential strategies to improve SCC inspection or monitoring performance are offered to benefit management of SCC degradation in LWRs.

Assessment of NDE technologies for detection and characterization of stress corrosion cracking in LWRs

International Nuclear Information System (INIS)

Meyer, R.M.; Ramuhalli, P.; Toloczko, M.B.; Bond, L.J.; Montgomery, R.O.

2012-01-01

Stress corrosion cracking (SCC) in light water reactors (LWRs) has been a persistent form of degradation in the nuclear industry. Examples of SCC can be found for a range of materials in boiling and pressurized water reactor environments, including carbon steels, stainless steels, and nickel-base alloys. The evolution of SCC is often characterized by a long initiation stage followed by a phase of more rapid crack growth to failure. This provides a relatively short window of opportunity to detect the start of observable SCC, and it is conceivable that SCC could progress from initiation to failure between subsequent examinations when managed by applying periodic in-service inspection techniques. Implementation of advanced aging management paradigms in the current fleet of LWRs will require adaptation of existing measurement technologies and development of new technologies to perform on-line measurements during reactor operation to ensure timely detection of material degradation and to support the implementation of advanced diagnostics and prognostics. This paper considers several non-destructive examination (NDE) technologies with known sensitivity to detection of indicators for SCC initiation and/or propagation, and assesses these technologies with respect to their ability to detect and accurately characterize the significance of an SCC flaw. Potential strategies to improve SCC inspection or monitoring performance are offered to benefit management of SCC degradation in LWRs. (author)

Workplace-based assessment: raters' performance theories and constructs.

Science.gov (United States)

Govaerts, M J B; Van de Wiel, M W J; Schuwirth, L W T; Van der Vleuten, C P M; Muijtjens, A M M

2013-08-01

Weaknesses in the nature of rater judgments are generally considered to compromise the utility of workplace-based assessment (WBA). In order to gain insight into the underpinnings of rater behaviours, we investigated how raters form impressions of and make judgments on trainee performance. Using theoretical frameworks of social cognition and person perception, we explored raters' implicit performance theories, use of task-specific performance schemas and the formation of person schemas during WBA. We used think-aloud procedures and verbal protocol analysis to investigate schema-based processing by experienced (N = 18) and inexperienced (N = 16) raters (supervisor-raters in general practice residency training). Qualitative data analysis was used to explore schema content and usage. We quantitatively assessed rater idiosyncrasy in the use of performance schemas and we investigated effects of rater expertise on the use of (task-specific) performance schemas. Raters used different schemas in judging trainee performance. We developed a normative performance theory comprising seventeen inter-related performance dimensions. Levels of rater idiosyncrasy were substantial and unrelated to rater expertise. Experienced raters made significantly more use of task-specific performance schemas compared to inexperienced raters, suggesting more differentiated performance schemas in experienced raters. Most raters started to develop person schemas the moment they began to observe trainee performance. The findings further our understanding of processes underpinning judgment and decision making in WBA. Raters make and justify judgments based on personal theories and performance constructs. Raters' information processing seems to be affected by differences in rater expertise. The results of this study can help to improve rater training, the design of assessment instruments and decision making in WBA.

Functional Performance and Associations between Performance Tests and Neurological Assessment Differ in Men and Women with Parkinson's Disease.

Science.gov (United States)

Medijainen, Kadri; Pääsuke, Mati; Lukmann, Aet; Taba, Pille

2015-01-01

Neurological assessment of a patient with Parkinson's disease (PD) is expected to reflect upon functional performance. As women are known to report more limitations even for same observed functional performance level, present study was designed to examine whether associations between neurological assessments and functional performance differ across genders. 14 men and 14 women with PD participated. Functional performance was assessed by measuring walking speeds on 10-meter walk test (10MWT) and by performing timed-up-and-go-test (TUG). Neurological assessment included Hoehn and Yahr Scale (HY), Movement Disorders Society Unified Parkinson's Disease Rating Scale (MDS-UPDRS), Schwab and England Activities of Daily Living Scale (S-E), and Mini Mental State Examination (MMSE). In women with PD, Kendall's tau-b correlation analyses revealed significant correlations between functional performance tests and neurological assessment measures, with the exception in MMSE. No corresponding associations were found for men, although they demonstrated better functional performance, as expected. Men in similar clinical stage of the PD perform better on functional tests than women. Disease severity reflects upon functional performance differently in men and women with PD. Results indicate that when interpreting the assessment results of both functional performance and neurological assessment tests, the gender of the patient should be taken into consideration.

The use of expert elicitation to quantify uncertainty in incomplete sorption data bases for Waste Isolation Pilot Plant performance assessment

International Nuclear Information System (INIS)

Anderson, D.R.; Trauth, K.M.; Hora, S.C.

1991-01-01

Iterative, annual performance-assessment calculations are being performed for the Waste Isolation Pilot Plant (WIPP), a planned underground repository in southeastern New Mexico, USA for the disposal of transuranic waste. The performance-assessment calculations estimate the long-term radionuclide releases from the disposal system to the accessible environment. Because direct experimental data in some areas are presently of insufficient quantity to form the basis for the required distributions. Expert judgment was used to estimate the concentrations of specific radionuclides in a brine exiting a repository room or drift as it migrates up an intruding borehole, and also the distribution coefficients that describe the retardation of radionuclides in the overlying Culebra Dolomite. The variables representing these concentrations and coefficients have been shown by 1990 sensitivity analyses to be among the set of parameters making the greatest contribution to the uncertainty in WIPP performance-assessment predictions. Utilizing available information, the experts (one expert panel addressed concentrations and a second panel addressed retardation) developed an understanding of the problem and were formally elicited to obtain probability distributions that characterize the uncertainty in fixed, but unknown, quantities. The probability distributions developed by the experts are being incorporated into the 1991 performance-assessment calculations. 16 refs., 4 tabs

Coordinated site characterization and performance assessment - an iterative approach for the site evaluation

International Nuclear Information System (INIS)

Papp, T.; Ericsson, L.O.; Thegerstroem, C.; Almen, K.E.

1995-01-01

SKB planning for siting a deep repository involves feasibility studies in 5-10 municipalities surface based characterization and drilling on two candidate sites and detailed characterization of one site including a shaft to proposed repository depth. The selection of a site or the detailed layout of the repository defines characteristics that might influence safety in a broad sense. There is a strong ling between the safety, technical (engineering) and functional aspects. The site selection will be based on general geoscientific information, i.e. mechanical stability, ground-water chemistry, slow ground-water movements and complicating factors like high potential for mineralization. The general layout of the repository in the actual geological structure of the site must be done with regard to a number of guidelines, e.g. to hydraulically separate the parts of the repository containing the spent nuclear fuel from those for other types of long lived waste and to separate the two stages of the spent fuel repository so they can be handled separately in the licensing process. When the various parts of the repository have been tentatively located the consequence of the multiple barrier principle is that the layout of the various parts should be made with the aim to utilize the available natural barrier system at the site as well as possible. (authors). 2 refs., 3 figs., 2 tabs

Physician Performance Assessment: Prevention of Cardiovascular Disease

Science.gov (United States)

Lipner, Rebecca S.; Weng, Weifeng; Caverzagie, Kelly J.; Hess, Brian J.

2013-01-01

Given the rising burden of healthcare costs, both patients and healthcare purchasers are interested in discerning which physicians deliver quality care. We proposed a methodology to assess physician clinical performance in preventive cardiology care, and determined a benchmark for minimally acceptable performance. We used data on eight…

Radioactive Waste Management Complex performance assessment: Draft

Energy Technology Data Exchange (ETDEWEB)

Case, M.J.; Maheras, S.J.; McKenzie-Carter, M.A.; Sussman, M.E.; Voilleque, P.

1990-06-01

A radiological performance assessment of the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory was conducted to demonstrate compliance with appropriate radiological criteria of the US Department of Energy and the US Environmental Protection Agency for protection of the general public. The calculations involved modeling the transport of radionuclides from buried waste, to surface soil and subsurface media, and eventually to members of the general public via air, ground water, and food chain pathways. Projections of doses were made for both offsite receptors and individuals intruding onto the site after closure. In addition, uncertainty analyses were performed. Results of calculations made using nominal data indicate that the radiological doses will be below appropriate radiological criteria throughout operations and after closure of the facility. Recommendations were made for future performance assessment calculations.

Radioactive Waste Management Complex performance assessment: Draft

International Nuclear Information System (INIS)

Case, M.J.; Maheras, S.J.; McKenzie-Carter, M.A.; Sussman, M.E.; Voilleque, P.

1990-06-01

A radiological performance assessment of the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory was conducted to demonstrate compliance with appropriate radiological criteria of the US Department of Energy and the US Environmental Protection Agency for protection of the general public. The calculations involved modeling the transport of radionuclides from buried waste, to surface soil and subsurface media, and eventually to members of the general public via air, ground water, and food chain pathways. Projections of doses were made for both offsite receptors and individuals intruding onto the site after closure. In addition, uncertainty analyses were performed. Results of calculations made using nominal data indicate that the radiological doses will be below appropriate radiological criteria throughout operations and after closure of the facility. Recommendations were made for future performance assessment calculations

Self- and peer-assessments of ambulance drivers' driving performance

Directory of Open Access Journals (Sweden)

Anna Sundström

2012-07-01

Full Text Available The aim of the present study was to develop and examine the quality of the Ambulance Driver Self-assessment Questionnaire (ADSQ and the Ambulance Driver Peer-assessment Questionnaire (ADPQ measuring aspects of, driving performance, driving style and driving competence. In addition the ADSQ measures self-reflection and safety-attitudes. The aim of the study was also to examine ambulance drivers' self- and peer-assessments as well as to examine the accuracy of self-assessments by comparing self-assessed and peer-assessed driving performance, driving style and competence. 76 ambulance drivers employed at two ambulance stations in northern Sweden completed ADSQ and ADPQ. Item analyses were conducted to examine the psychometric properties of the items, and based on the results some revisions were made to improve the questionnaires. The revised questionnaires were functioning rather well, although some subscale demonstrated low internal consistency. Subscale inter-correlations provided support for construct validity. Self- and peer-assessments indicated safe driving performance and good driver competence, which is positive from a traffic safety perspective. A comparison of mean self- and peer-assessment ratings, controlling for age, gender and driving experience showed no significant differences, except for the subscale overtaking. This indicates that ambulance drivers' self-assessments are realistic in most areas.

Performance assessment for future low-level waste disposal facilities at ORNL

International Nuclear Information System (INIS)

Lee, D.W.; Kocher, D.C.

1989-01-01

This paper discusses the strategy for waste management on the Oak Ridge Reservation (ORR) and the approach to preparing future performance assessments that has evolved from previous performance assessment studies of low-level radioactive waste disposal on the ORR. The strategy for waste management is based on the concept that waste classification should be determined by performance assessment other than the sources of waste. This dose-based strategy for waste classification and management places special importance on the preparation and interpretation of waste disposal performance assessments for selecting appropriate disposal technologies and developing waste acceptance criteria. Additionally, the challenges to be overcome in the preparation of performance assessments are discussed. 7 refs

Geodiversity characterization and assessment of the Morainic Amphitheatre of Rivoli -Avigliana (NW-Italy)

Science.gov (United States)

Giordano, Enrico; Lucchesi, Stefania; Perotti, Luigi; Giardino, Marco

2014-05-01

The concept of Geodiversity in its wide sense refers specifically to particular geosystems that are in themselves complex (e.g diverse) assemblages of bedrock, landform, and soil features. Therefore, geodiversity assessment is strictly related to landscape structure, whose studies are in the field of complex Physical Geography. Moreover, Geodiversity studies provide a fundamental base for geoconservation and environmental management in a holistic way. This is particularly true within complex geomorphological environments, where many intrinsic and extrinsic factors are interconnected. Various procedures has been already applied for the creation of geodiversity maps in different geomorphological context, but especially in wide areas with a large geodiversity of landforms. Pleistocene morainic amphitheatres of the Alpine piedmont regions are indeed particular and complex environments: not only for the geological and geomorphological points of view, but also for their relationships with biotic components and human life. The aim of this study is to carry out a geodiversity characterization of the Rivoli-Avigliana Morainic Amphitheatre (AMRA; NW Italy). The AMRA separates the lower Susa Valley from the middle course of the Sangone River; it is a set of low hills and depressions related to glacial pulsations aged between 750,000 and 12,000 years ago. Earth Sciences knowledge of the area has been compared to detailed field geomorphological and territorial data in order to determine qualitative and quantitative landscape parameters and to evaluate their validity for geodiversity assessment. A first qualitative characterization of the AMRA and an estimation of its geodiversity have been performed by means of geomorphological mapping and stratigraphic studies, including geomorphosites assessment for the same area. Then, geodiversity characterization and evaluation have been performed through the definition and application of quantitative parameters (landform energy, slope

Final Report for the Restart of the Waste Characterization, Reduction and Repackaging Facility (WCRRF) Contractor Readiness Assessment (CRA)

Energy Technology Data Exchange (ETDEWEB)

Stephens, Gregory Mark [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-02-22

The Los Alamos National Laboratory (LANL or Laboratory) Contractor Readiness Assessment (CRA) required for restart of the Technical Area (TA) 50 Waste Characterization, Reduction, and Repackaging Facility (WCRRF) for remediated nitrate salt (RNS) waste operations was performed in compliance with the requirements of Department of Energy (DOE) Order (O) 425.1D, Verification of Readiness to Start Up or Restart Nuclear Facilities, and LANL procedure FSD-115-001, Verification of Readiness to Start Up or Restart LANL Nuclear Facilities, Activities, and Operations.

ARNICA, the Arcetri near-infrared camera: Astronomical performance assessment.

Science.gov (United States)

Hunt, L. K.; Lisi, F.; Testi, L.; Baffa, C.; Borelli, S.; Maiolino, R.; Moriondo, G.; Stanga, R. M.

1996-01-01

The Arcetri near-infrared camera ARNICA was built as a users' instrument for the Infrared Telescope at Gornergrat (TIRGO), and is based on a 256x256 NICMOS 3 detector. In this paper, we discuss ARNICA's optical and astronomical performance at the TIRGO and at the William Herschel Telescope on La Palma. Optical performance is evaluated in terms of plate scale, distortion, point spread function, and ghosting. Astronomical performance is characterized by camera efficiency, sensitivity, and spatial uniformity of the photometry.

Machine performance assessment and enhancement for a hexapod machine

Energy Technology Data Exchange (ETDEWEB)

Mou, J.I. [Arizona State Univ., Tempe, AZ (United States); King, C. [Sandia National Labs., Livermore, CA (United States). Integrated Manufacturing Systems Center

1998-03-19

The focus of this study is to develop a sensor fused process modeling and control methodology to model, assess, and then enhance the performance of a hexapod machine for precision product realization. Deterministic modeling technique was used to derive models for machine performance assessment and enhancement. Sensor fusion methodology was adopted to identify the parameters of the derived models. Empirical models and computational algorithms were also derived and implemented to model, assess, and then enhance the machine performance. The developed sensor fusion algorithms can be implemented on a PC-based open architecture controller to receive information from various sensors, assess the status of the process, determine the proper action, and deliver the command to actuators for task execution. This will enhance a hexapod machine`s capability to produce workpieces within the imposed dimensional tolerances.

Assessment and evaluation of the performance of nuclear medicine and ultrasound imaging instrumentation

International Nuclear Information System (INIS)

Bergmann, Helmar; Kollmann, Christian

1996-01-01

The purpose of this work has been to assess the quality of instrumentation used for the collection of representative patient images during the coordinated research program entitled ''Evaluation of Imaging Procedures for the Diagnosis of Liver Diseases''. Previous work carried out during earlier phases of the project was concerned with the establishment of methods for comparison of the quality of such instrumentation. In this stage the quality of both gamma cameras and ultrasound scanners were assessed using the previously established methods. The evaluation was partly used to validate acceptable working conditions of the equipment during the collection of patient studies, partly to obtain basic data in order to be able to characterize the imaging quality of the devices. This would permit to both identify equipment unsuitable to be used in the study and to take into account the imaging quality token performing the ROC analysis of the evaluation of the patient images

Assessing the Value of UAV Photogrammetry for Characterizing Terrain in Complex Peatlands

Directory of Open Access Journals (Sweden)

Julie Lovitt

2017-07-01

Full Text Available Microtopographic variability in peatlands has a strong influence on greenhouse gas fluxes, but we lack the ability to characterize terrain in these environments efficiently over large areas. To address this, we assessed the capacity of photogrammetric data acquired from an unmanned aerial vehicle (UAV or drone to reproduce ground elevations measured in the field. In particular, we set out to evaluate the role of (i vegetation/surface complexity and (ii supplementary LiDAR data on results. We compared remote-sensing observations to reference measurements acquired with survey grade GPS equipment at 678 sample points, distributed across a 61-hectare treed bog in northwestern Alberta, Canada. UAV photogrammetric data were found to capture elevation with accuracies, by root mean squares error, ranging from 14–42 cm, depending on the state of vegetation/surface complexity. We judge the technology to perform well under all but the most-complex conditions, where ground visibility is hindered by thick vegetation. Supplementary LiDAR data did not improve results significantly, nor did it perform well as a stand-alone technology at the low densities typically available to researchers.

Performance objectives for the Hanford immobilized low-activity waste (ILAW) performance assessment

International Nuclear Information System (INIS)

MANN, F.M.

1999-01-01

Before low-level waste may be disposed of, a performance assessment must be written and then approved by the DOE (DOE 1988a, DOE 1999a). The performance assessment is to determine whether ''reasonable assurance'' exists that the performance objectives of the disposal facility will be met. The DOE requirements for waste disposal (DOE 1988a, DOE 1999a) require (see Appendix B): The protection of public health and safety; and The protection of the environment. Although quantitative limits are sometimes stated (for example, the all-pathways exposure limit is 25 mredyear), usually the requirements are stated in a general nature. Quantitative limits were established by: investigating all potentially applicable regulations as well as interpretations of the review panels which DOE has established to review performance assessments; interacting with program management to establish the additional requirements of the program; and interacting with the public (i.e., the Hanford Advisory Board members; as well as affected Tribal Governments) to understand the values of residents in the Pacific Northwest. Because of space considerations, not all radionuclides and dangerous chemicals are listed in this document. The radionuclides listed here are those which were explicitly treated in the ILAW PA (Mann 1998). The dangerous chemicals listed here are those most often detected in Hanford tank waste as documented in the Regulatory Data Quality Objectives Supporting Tank Waste Remediation System Privatization Project (Wiemers 1998)

Repository Integration Program: RIP performance assessment and strategy evaluation model theory manual and user`s guide

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-11-01

This report describes the theory and capabilities of RIP (Repository Integration Program). RIP is a powerful and flexible computational tool for carrying out probabilistic integrated total system performance assessments for geologic repositories. The primary purpose of RIP is to provide a management tool for guiding system design and site characterization. In addition, the performance assessment model (and the process of eliciting model input) can act as a mechanism for integrating the large amount of available information into a meaningful whole (in a sense, allowing one to keep the ``big picture`` and the ultimate aims of the project clearly in focus). Such an integration is useful both for project managers and project scientists. RIP is based on a `` top down`` approach to performance assessment that concentrates on the integration of the entire system, and utilizes relatively high-level descriptive models and parameters. The key point in the application of such a ``top down`` approach is that the simplified models and associated high-level parameters must incorporate an accurate representation of their uncertainty. RIP is designed in a very flexible manner such that details can be readily added to various components of the model without modifying the computer code. Uncertainty is also handled in a very flexible manner, and both parameter and model (process) uncertainty can be explicitly considered. Uncertainty is propagated through the integrated PA model using an enhanced Monte Carlo method. RIP must rely heavily on subjective assessment (expert opinion) for much of its input. The process of eliciting the high-level input parameters required for RIP is critical to its successful application. As a result, in order for any project to successfully apply a tool such as RIP, an enormous amount of communication and cooperation must exist between the data collectors, the process modelers, and the performance. assessment modelers.

Improved thermal source term generation capability for use in performance assessment and system studies

International Nuclear Information System (INIS)

King, J.; Rhodes, C.

1994-01-01

This paper describes work performed by the Civilian Radioactive Waste Management System (CRWMS) Management and Operating (M ampersand O) Contractor to improve spent nuclear fuel (SNF) waste stream characterization for system studies. It discusses how these new capabilities may be exploited for thermal source term generation for use in repository performance assessment modeling. SNF historical discharges have been exhaustively tracked, and significant effort has gone into capturing, verifying, and electronically managing spent fuel inventory data. Future discharge projections are produced annually by the Energy Information Administration (EIA) using sophisticated computer models. The output of these models is coupled with annually updated SNF historical discharges to produce what is referred to as the open-quotes reactor database.close quotes This database and related data are published in a variety of ways including on magnetic media for consistent use by analysts or other interested parties

Synthesis, characterization and gas sensing performance of SnO2 ...

Indian Academy of Sciences (India)

Synthesis, characterization and gas sensing performance of SnO2 thin films prepared by spray pyrolysis. GANESH E PATIL, D D KAJALE, D N CHAVAN†, N K PAWAR††, P T AHIRE, S D SHINDE#,. V B GAIKWAD# and G H JAIN. ∗. Materials Research Laboratory, Arts, Commerce and Science College, Nandgaon 423 106, ...

Characterization of materials for a reactive transport model validation experiment: Interim report on the caisson experiment. Yucca Mountain Site Characterization Project

International Nuclear Information System (INIS)

Siegel, M.D.; Cheng, W.C.; Ward, D.B.; Bryan, C.R.

1995-08-01

Models used in performance assessment and site characterization activities related to nuclear waste disposal rely on simplified representations of solute/rock interactions, hydrologic flow field and the material properties of the rock layers surrounding the repository. A crucial element in the design of these models is the validity of these simplifying assumptions. An intermediate-scale experiment is being carried out at the Experimental Engineered Test Facility at Los Alamos Laboratory by the Los Alamos and Sandia National Laboratories to develop a strategy to validate key geochemical and hydrological assumptions in performance assessment models used by the Yucca Mountain Site Characterization Project

Characterization of materials for a reactive transport model validation experiment: Interim report on the caisson experiment. Yucca Mountain Site Characterization Project

Energy Technology Data Exchange (ETDEWEB)

Siegel, M.D.; Cheng, W.C. [Sandia National Labs., Albuquerque, NM (United States); Ward, D.B.; Bryan, C.R. [Univ. of New Mexico, Albuquerque, NM (United States). Dept. of Earth and Planetary Sciences

1995-08-01

Models used in performance assessment and site characterization activities related to nuclear waste disposal rely on simplified representations of solute/rock interactions, hydrologic flow field and the material properties of the rock layers surrounding the repository. A crucial element in the design of these models is the validity of these simplifying assumptions. An intermediate-scale experiment is being carried out at the Experimental Engineered Test Facility at Los Alamos Laboratory by the Los Alamos and Sandia National Laboratories to develop a strategy to validate key geochemical and hydrological assumptions in performance assessment models used by the Yucca Mountain Site Characterization Project.

Low-level waste disposal performance assessments - Total source-term analysis

Energy Technology Data Exchange (ETDEWEB)

Wilhite, E.L.

1995-12-31

Disposal of low-level radioactive waste at Department of Energy (DOE) facilities is regulated by DOE. DOE Order 5820.2A establishes policies, guidelines, and minimum requirements for managing radioactive waste. Requirements for disposal of low-level waste emplaced after September 1988 include providing reasonable assurance of meeting stated performance objectives by completing a radiological performance assessment. Recently, the Defense Nuclear Facilities Safety Board issued Recommendation 94-2, {open_quotes}Conformance with Safety Standards at Department of Energy Low-Level Nuclear Waste and Disposal Sites.{close_quotes} One of the elements of the recommendation is that low-level waste performance assessments do not include the entire source term because low-level waste emplaced prior to September 1988, as well as other DOE sources of radioactivity in the ground, are excluded. DOE has developed and issued guidance for preliminary assessments of the impact of including the total source term in performance assessments. This paper will present issues resulting from the inclusion of all DOE sources of radioactivity in performance assessments of low-level waste disposal facilities.

Total-system performance assessment for Yucca Mountain -- SNL second iteration (TSPA-1993); Executive summary

Energy Technology Data Exchange (ETDEWEB)

Wilson, M.L.; Barnard, R.W. [Sandia National Labs., Albuquerque, NM (United States); Gauthier, J.H. [Sandia National Labs., Albuquerque, NM (United States)]|[Spectra Research, Inc. (United States)] [and others

1994-04-01

Sandia National Laboratories has completed the second iteration of the periodic total-system performance assessments (TSPA-93) for the Yucca Mountain Site Characterization Project (YMP). Scenarios describing expected conditions (aqueous and gaseous transport of contaminants) and low-probability events (human-intrusion drilling and volcanic intrusion) are modeled. The hydrologic processes modeled include estimates of the perturbations to ambient conditions caused by heating of the repository resulting from radioactive decay of the waste. TSPA-93 incorporates significant new detailed process modeling, including two- and three-dimensional modeling of thermal effects, groundwater flow in the saturated-zone aquifers, and gas flow in the unsaturated zone. Probabilistic analyses are performed for aqueous and gaseous flow and transport, human intrusion, and basaltic magmatic activity. Results of the calculations lead to a number of recommendations concerning studies related to site characterization. Primary among these are the recommendations to obtain better information on percolation flux at Yucca Mountain, on the presence or absence of flowing fractures, and on physical and chemical processes influencing gaseous flow. Near-field thermal and chemical processes, and waste-container degradation are also areas where additional investigations may reduce important uncertainties. Recommendations for repository and waste-package design studies are: (1) to evaluate the performance implications of large-size containers, and (2) to investigate in more detail the implications of high repository thermal power output on the adjacent host rock and on the spent fuel.

Methodology for assessing performance of waste management systems

International Nuclear Information System (INIS)

Meshkov, N.K.; Herzenberg, C.L.; Camasta, S.F.

1988-01-01

The newly revised draft DOE Order 5820.2, Chapter 3, requires that DOE low-level waste shall be managed on a systematic basis using the most appropriate combination of waste generation reduction, segregation, treatment, and disposal practices so that the radioactive components are contained and the overall cost effectiveness is minimized. This order expects each site to prepare and maintain an overall waste management systems performance assessment supporting the combination of waste management practices used in generation reduction segregation, treatment, packaging, storage, and disposal. A document prepared by EG and G Idaho, Inc. for the Department of Energy called Guidance for Conduct of Waste Management Systems Performance Assessment is specifically intended to provide the approach necessary to meet the systems performance assessment requirement of DOE Order 5820.2, Chapter 3, and other applicable state regulations dealing with LLW (low-level radioactive wastes). Methods and procedures are needed for assessing the performance of a waste management system. This report addresses this need. The purpose of the methodology provided in this report is to select the optimal way to manage particular sets of waste streams from generation to disposal in a safe and cost-effective manner, and thereby assist the DOE LLW mangers in complying with the DOE Order 5820.2, Chapter 3, and the associated guidance document

Generalized Characterization Methodology for Performance Modelling of Lithium-Ion Batteries

DEFF Research Database (Denmark)

Stroe, Daniel Loan; Swierczynski, Maciej Jozef; Stroe, Ana-Irina

2016-01-01

Lithium-ion (Li-ion) batteries are complex energy storage devices with their performance behavior highly dependent on the operating conditions (i.e., temperature, load current, and state-of-charge (SOC)). Thus, in order to evaluate their techno-economic viability for a certain application, detailed...... information about Li-ion battery performance behavior becomes necessary. This paper proposes a comprehensive seven-step methodology for laboratory characterization of Li-ion batteries, in which the battery’s performance parameters (i.e., capacity, open-circuit voltage (OCV), and impedance) are determined...... and their dependence on the operating conditions are obtained. Furthermore, this paper proposes a novel hybrid procedure for parameterizing the batteries’ equivalent electrical circuit (EEC), which is used to emulate the batteries’ dynamic behavior. Based on this novel parameterization procedure, the performance model...

Device Characterization of High Performance Quantum Dot Comb Laser

KAUST Repository

Rafi, Kazi

2012-02-01

The cost effective comb based laser sources are considered to be one of the prominent emitters used in optical communication (OC) and photonic integrated circuits (PIC). With the rising demand for delivering triple-play services (voice, data and video) in FTTH and FTTP-based WDM-PON networks, metropolitan area network (MAN), and short-reach rack-to-rack optical computer communications, a versatile and cost effective WDM transmitter design is required, where several DFB lasers can be replaced by a cost effective broadband comb laser to support on-chip optical signaling. Therefore, high performance quantum dot (Q.Dot) comb lasers need to satisfy several challenges before real system implementations. These challenges include a high uniform broadband gain spectrum from the active layer, small relative intensity noise with lower bit error rate (BER) and better temperature stability. Thus, such short wavelength comb lasers offering higher bandwidth can be a feasible solution to address these challenges. However, they still require thorough characterization before implementation. In this project, we briefly characterized the novel quantum dot comb laser using duty cycle based electrical injection and temperature variations where we have observed the presence of reduced thermal conductivity in the active layer. This phenomenon is responsible for the degradation of device performance. Hence, different performance trends, such as broadband emission and spectrum stability were studied with pulse and continuous electrical pumping. The tested comb laser is found to be an attractive solution for several applications but requires further experiments in order to be considered for photonic intergraded circuits and to support next generation computer-communications.

Web-based application on employee performance assessment using exponential comparison method

Science.gov (United States)

Maryana, S.; Kurnia, E.; Ruyani, A.

2017-02-01

Employee performance assessment is also called a performance review, performance evaluation, or assessment of employees, is an effort to assess the achievements of staffing performance with the aim to increase productivity of employees and companies. This application helps in the assessment of employee performance using five criteria: Presence, Quality of Work, Quantity of Work, Discipline, and Teamwork. The system uses the Exponential Comparative Method and Weighting Eckenrode. Calculation results using graphs were provided to see the assessment of each employee. Programming language used in this system is written in Notepad++ and MySQL database. The testing result on the system can be concluded that this application is correspond with the design and running properly. The test conducted is structural test, functional test, and validation, sensitivity analysis, and SUMI testing.

Survey and review of near-field performance assessment

International Nuclear Information System (INIS)

Apted, M.J.

1993-01-01

The aim of this chapter is to describe the performance assessment (PA) context in which near-field models have been developed and applied. An overview is given of a number of PA studies. Although the focus is on near-field models, the overview covers the full context in which the PAs have been performed, including the purpose of the studies and regulatory context. Special emphasis has been given to the scenarios analyzed in the assessments; the scenarios set the framework for model development and application. Another aspect to consider in a study of near-field modeling from the perspective of total PA is the linking between near-field and far-field assessment. (R.P.) 6 tabs

5th Total System Performance Assessment Workshop

International Nuclear Information System (INIS)

Hwang, Yong Soo; Lee, Youn Myoung; Kang, Chul Hyung; Lee, Sung Ho

2009-07-01

Research items on safety assessment of high-level waste repository have been proposed by external invited experts outside KAERI and discussed extensively during the annual 5th performance assessment workshop prepared by safety assessment group in KAERI. This could be useful to set up R and D plans necessary for the next phase of mid- and long-term reaserch area regarding the safety assessment of high-level waste repository. Through the research and the presentation, HLW-related research and development area including such specific research items as current status of HLW safety assessment research, current requirement for the licensing of the repository system, priority on research area, data base building for the safety assessment, source-term modeling as well as safety case, among many others, have been discussed and summarized

Performance Demonstration Program Plan for Nondestructive Assay for the TRU Waste Characterization Program. Revision 1

International Nuclear Information System (INIS)

1997-01-01

The Performance Demonstration Program (PDP) for Nondestructive Assay (NDA) consists of a series of tests conducted on a regular frequency to evaluate the capability for nondestructive assay of transuranic (TRU) waste throughout the Department of Energy (DOE) complex. Each test is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements performed with TRU waste characterization systems. Measurement facility performance will be demonstrated by the successful analysis of blind audit samples according to the criteria set by this Program Plan. Intercomparison between measurement groups of the DOE complex will be achieved by comparing the results of measurements on similar or identical blind samples reported by the different measurement facilities. Blind audit samples (hereinafter referred to as PDP samples) will be used as an independent means to assess the performance of measurement groups regarding compliance with established Quality Assurance Objectives (QAOs). As defined for this program, a PDP sample consists of a 55-gallon matrix drum emplaced with radioactive standards and fabricated matrix inserts. These PDP sample components, once manufactured, will be secured and stored at each participating measurement facility designated and authorized by Carlsbad Area Office (CAO) under secure conditions to protect them from loss, tampering, or accidental damage

Development of self and peer performance assessment on iodometric titration experiment

Science.gov (United States)

Nahadi; Siswaningsih, W.; Kusumaningtyas, H.

2018-05-01

This study aims to describe the process in developing of reliable and valid assessment to measure students’ performance on iodometric titration and the effect of the self and peer assessment on students’ performance. The self and peer-instrument provides valuable feedback for the student performance improvement. The developed assessment contains rubric and task for facilitating self and peer assessment. The participants are 24 students at the second-grade student in certain vocational high school in Bandung. The participants divided into two groups. The first 12 students involved in the validity test of the developed assessment, while the remain 12 students participated for the reliability test. The content validity was evaluated based on the judgment experts. Test result of content validity based on judgment expert show that the developed performance assessment instrument categorized as valid on each task with the realibity classified as very good. Analysis of the impact of the self and peer assessment implementation showed that the peer instrument supported the self assessment.

Interaction of phosphorylcholine with fibronectin coatings: Surface characterization and biological performances

Energy Technology Data Exchange (ETDEWEB)

Montaño-Machado, Vanessa, E-mail: vanessa.montano-machado.1@ulaval.ca [Laboratory for Biomaterials and Bioengineering, Dept. of Min-Met-Materials Eng., & University Hospital Research Center, Laval University, University Campus, PLT-1745G, Québec, Québec, G1 V 0A6 (Canada); ERRMECe, University of Cergy-Pontoise, Site Saint-Martin, 2 Avenue Adolphe Chauvin, 95302 Cergy-Pontoise Cedex (France); Noël, Céline, E-mail: celine.noel@unamur.be [Research Centre in Physics of Matter and Radiation (PMR), Université de Namur, 61 rue de Bruxelles, B-5000 Namur (Belgium); Chevallier, Pascale, E-mail: pascale.chevallier@crchudequebec.ulaval.ca [Laboratory for Biomaterials and Bioengineering, Dept. of Min-Met-Materials Eng., & University Hospital Research Center, Laval University, University Campus, PLT-1745G, Québec, Québec, G1 V 0A6 (Canada); Turgeon, Stéphane, E-mail: stephane.turgeon@crchudequebec.ulaval.ca [Laboratory for Biomaterials and Bioengineering, Dept. of Min-Met-Materials Eng., & University Hospital Research Center, Laval University, University Campus, PLT-1745G, Québec, Québec, G1 V 0A6 (Canada); Houssiau, Laurent, E-mail: laurent.houssiau@unamur.be [Research Centre in Physics of Matter and Radiation (PMR), Université de Namur, 61 rue de Bruxelles, B-5000 Namur (Belgium); Pauthe, Emmanuel, E-mail: emmanuel.pauthe@u-cergy.fr [ERRMECe, University of Cergy-Pontoise, Site Saint-Martin, 2 Avenue Adolphe Chauvin, 95302 Cergy-Pontoise Cedex (France); and others

2017-02-28

Highlights: • Fibronectin/phosphorylcholine coatings on plasma deposited fluorocarbon films were created. • The effect of several coating techniques on the surface biological performances was evaluated. • XPS, DWCA, immunostaining and ToF-SIMS (imaging and depth profiling) techniques were applied. • Potential for cardiovascular applications was showed by endothelial cell and blood interactions. - Abstract: Coating medical devices with several bioactive molecules is an interesting approach to achieve specific biological targets upon the interaction of the biomaterial with the living environment. In this work, a fluorocarbon polymer (CF{sub x}) was first deposited by plasma treatment on stainless steel (SS) substrate and thereafter, coatings containing fibronectin (FN) and phosphorylcholine (PRC) were created for cardiovascular applications. These two biomolecules were chosen to promote endothelialization and to avoid thrombus formation, respectively. Adsorption and grafting techniques were applied – and combined – to accomplish 4 different coatings containing both molecules. However, big challenge was found to characterize a small molecule (PRC: 184 g/mol) interacting with a protein (FN: 450 kD). For the first time XPS, dynamic water contact angle, immunostaining and ToF-SIMS (imaging and depth profiling) analyses were combined to accomplish the characterization of such a coating. The most encouraging biological performances were obtained for samples where FN was grafted to the CF{sub x} film followed by the adsorption of PRC: proliferation of endothelial cells and hemocompatibility properties were observed. Promising coatings for cardiovascular applications were developed. The relevance of characterizing the coatings with high sensitive techniques and the further correlation with their biological performances were evidenced.

Feedback from performance assessment to site characterisation. The SITE-94 example

International Nuclear Information System (INIS)

Dverstorp, B.; Geier, J.

1999-01-01

Interaction and information exchange between site characterisation and performance assessment are key features of any successful radioactive waste management programme. Some examples are presented of the types of feedback that can be offered from performance assessment to site characterisation, based on SKI's most recent performance assessment project, SITE-94. SITE-94 in Sweden was an assessment of a hypothetical repository for spent nuclear fuel, based on real data gathered in the surface-based investigation of the Aespoe Hard Rock Laboratory site. Examples of feedback are given concerning quality control of data and site investigation procedures, identification of key parameters for the performance assessment, use of models for planning and evaluation of a site investigation, data sampling strategies, and guidance on future priorities for further development of site investigation methods. Because site characterisation serves multiple purposes, including provision of data for repository design and construction, it must account for and compromise among requirements from several lines of analyses in the performance assessment. (author)

Statistical analysis in MSW collection performance assessment.

Science.gov (United States)

Teixeira, Carlos Afonso; Avelino, Catarina; Ferreira, Fátima; Bentes, Isabel

2014-09-01

The increase of Municipal Solid Waste (MSW) generated over the last years forces waste managers pursuing more effective collection schemes, technically viable, environmentally effective and economically sustainable. The assessment of MSW services using performance indicators plays a crucial role for improving service quality. In this work, we focus on the relevance of regular system monitoring as a service assessment tool. In particular, we select and test a core-set of MSW collection performance indicators (effective collection distance, effective collection time and effective fuel consumption) that highlights collection system strengths and weaknesses and supports pro-active management decision-making and strategic planning. A statistical analysis was conducted with data collected in mixed collection system of Oporto Municipality, Portugal, during one year, a week per month. This analysis provides collection circuits' operational assessment and supports effective short-term municipality collection strategies at the level of, e.g., collection frequency and timetables, and type of containers. Copyright © 2014 Elsevier Ltd. All rights reserved.

Assessment of Innovation and Performance in the Fruit Chain; The Innovation-Performance Matrix

NARCIS (Netherlands)

Trienekens, J.H.; Uffelen, van R.L.M.; Debaire, J.; Omta, S.W.F.

2008-01-01

Purpose - This paper aims to bridge the concepts of innovation and performance and to develop a framework to assess innovation and performance in food chains. Design/methodology/approach - Based on an extensive literature search the paper identifies critical success factors (CSFs) and related

Improvement of biosphere assessment methodology for performance assessment of geological disposal facility. 2

International Nuclear Information System (INIS)

Miki, Takahito; Yoshida, Hideji; Ikeda, Takao

2002-02-01

This report contains results on study of Geosphere-Biosphere Interface (GBI), development of biosphere assessment model for gaseous and volatile radionuclides, review of biosphere assessment and research on safety indicators. Regarding study of Geosphere-Biosphere Interface (GBI), FEP database for the Geosphere-Biosphere Transitions Zone (GBTZ) were compiled. Furthermore, release scenarios were identified from the FEP database, and review of conservativeness and robustness of the conceptual and mathematical models developed previously by JNC were undertaken. Regarding development of biosphere assessment model for gaseous and volatile radionuclides, the conceptual and mathematical models were developed, and it was confirmed that the impact of the exposure pathway regarding gas release to flux-to-dose conversion factor is small. Regarding review of biosphere assessment data, the parameters which were used on JNC second progress report were reviewed and classified using the biosphere data protocol categories. Furthermore, the data for key parameter (important but poorly characterized parameters) were revised. Regarding research on safety indicator, some kinds of safety indicators, especially for the non-radioactive contaminant and for the non-human biota, are reviewed. (author)

Noise Characterization and Performance of MODIS Thermal Emissive Bands

Science.gov (United States)

Madhavan, Sriharsha; Xiong, Xiaoxiong; Wu, Aisheng; Wenny, Brian; Chiang, Kwofu; Chen, Na; Wang, Zhipeng; Li, Yonghong

2016-01-01

The MODerate-resolution Imaging Spectroradiometer (MODIS) is a premier Earth-observing sensor of the early 21st century, flying onboard the Terra (T) and Aqua (A) spacecraft. Both instruments far exceeded their six-year design life and continue to operate satisfactorily for more than 15 and 13 years, respectively. The MODIS instrument is designed to make observations at nearly a 100% duty cycle covering the entire Earth in less than two days. The MODIS sensor characteristics include a spectral coverage from 0.41micrometers to 14.4 micrometers, of which those wavelengths ranging from 3.7 micrometers to 14.4 micrometers cover the thermal infrared region which is interspaced in 16 thermal emissive bands (TEBs). Each of the TEB contains ten detectors which record samples at a spatial resolution of 1 km. In order to ensure a high level of accuracy for the TEB-measured top-of-atmosphere radiances, an onboard blackbody (BB) is used as the calibration source. This paper reports the noise characterization and performance of the TEB on various counts. First, the stability of the onboard BB is evaluated to understand the effectiveness of the calibration source. Next, key noise metrics such as the noise equivalent temperature difference and the noise equivalent dn difference (NEdN) for the various TEBs are determined from multiple temperature sources. These sources include the nominally controlled BB temperature of 290 K for T-MODIS and 285 K for A-MODIS, as well as a BB warm up-cool down cycle that is performed over a temperature range from roughly 270 to 315 K. The space-view port that measures the background signal serves as a viable cold temperature source for measuring noise. In addition, a well characterized Earth-view target, the Dome Concordia site located in the Antarctic plateau, is used for characterizing the stability of the sensor, indirectly providing a measure of the NEdN. Based on this rigorous characterization, a list of the noisy and inoperable detectors for

Performance characterization of pneumatic single pellet injection system

International Nuclear Information System (INIS)

Schuresko, D.D.; Milora, S.L.; Hogan, J.T.; Foster, C.A.; Combs, S.K.

1982-01-01

The Oak Ridge National Laboratory single-shot pellet injector, which has been used in plasma fueling experiments on ISX and PDX, has been upgraded and extensively instrumented in order to study the gas dynamics of pneumatic pellet injection. An improved pellet transport line was developed which utilizes a 0.3-cm-diam by 100-cm-long guide tube. Pellet gun performance was characterized by measurements of breech and muzzle dynamic pressures and by pellet velocity and mass determinations. Velocities up to 1.4 km/s were achieved for intact hydrogen pellets using hydrogen propellant at 5-MPa breech pressure. These data have been compared with new pellet acceleration calculations which include the effects of propellant friction, heat transfer, time-dependent boundary conditions, and finite gun geometry. These results provide a basis for the extrapolation of present-day pneumatic injection system performance to velocities in excess of 2 km/s

Performance characterization of pneumatic single pellet injection system

International Nuclear Information System (INIS)

Schuresko, D.D.; Milora, S.L.; Hogan, J.T.; Foster, C.A.; Combs, S.K.

1983-01-01

The Oak Ridge National Laboratory single-shot pellet injector, which has been used in plasma fueling experiments on ISX and PDX, has been upgraded and extensively instrumented in order to study the gas dyamics of pneumatic pellet injection. An improved pellet transport line was developed which utilizes a 0.3-cm-diam by 100-cm-long guide tube. Pellet gun performance was characterized by measurements of breech and muzzle dynamic pressures and by pellet velocity and mass determinations. Velocities of up to 1.4 km/s were achieved for intact hydrogen pellets using hydrogen propellant at 5-MPa breech pressure. These data have been compared with new pellet acceleration calculations which include the effects of propellant friction, heat transfer, time-dependent boundary conditions, and finite gun geometry. These results provide a basis for the extrapolation of present-day pneumatic injection system performance to velocities in excess of 2 km/s

Principal elements of the Basalt Waste Isolation Project performance assessment studies

International Nuclear Information System (INIS)

Baca, R.G.; Wilde, R.T.

1983-12-01

In this paper, three of the principal elements of the Basalt Waste Isolation Project (BWIP) performance assessment studies are focused on: (1) development of a methodology for probabilistic risk assessment, (2) performance analyses of repository subsystems, and (3) selection and ranking of disruptive event scenarios. Other elements of the BWIP performance assessment studies are briefly outlined. 12 references, 5 figures

Performance Model for High-Power Lithium Titanate Oxide Batteries based on Extended Characterization Tests

DEFF Research Database (Denmark)

Stroe, Ana-Irina; Swierczynski, Maciej Jozef; Stroe, Daniel Ioan

2015-01-01

Lithium-ion (Li-ion) batteries are found nowadays not only in portable/consumer electronics but also in more power demanding applications, such as stationary renewable energy storage, automotive and back-up power supply, because of their superior characteristics in comparison to other energy...... storage technologies. Nevertheless, prior to be used in any of the aforementioned application, a Li-ion battery cell must be intensively characterized and its behavior needs to be understood. This can be realized by performing extended laboratory characterization tests and developing Li-ion battery...... performance models. Furthermore, accurate performance models are necessary in order to analyze the behavior of the battery cell under different mission profiles, by simulation; thus, avoiding time and cost demanding real life tests. This paper presents the development and the parametrization of a performance...

Performance Assessment Position Paper: Time for Compliance

International Nuclear Information System (INIS)

Wilhite, E.L.

2003-01-01

This study lays out the historical development of the time frame for a low-level waste disposal facility to demonstrate compliance with the DOE performance objectives and requirements. The study recommends that 1,000 years should be used as the time for compliance for all of the performance objectives and requirements (i.e., for the all-pathways, air pathway, radon emanation, water resource protection and inadvertent intruder analyses) for all low-level waste disposal facility performance assessments at the Savannah River Site

Functional Performance and Associations between Performance Tests and Neurological Assessment Differ in Men and Women with Parkinson’s Disease

Directory of Open Access Journals (Sweden)

Kadri Medijainen

2015-01-01

Full Text Available Background. Neurological assessment of a patient with Parkinson’s disease (PD is expected to reflect upon functional performance. As women are known to report more limitations even for same observed functional performance level, present study was designed to examine whether associations between neurological assessments and functional performance differ across genders. Methods. 14 men and 14 women with PD participated. Functional performance was assessed by measuring walking speeds on 10-meter walk test (10MWT and by performing timed-up-and-go-test (TUG. Neurological assessment included Hoehn and Yahr Scale (HY, Movement Disorders Society Unified Parkinson’s Disease Rating Scale (MDS-UPDRS, Schwab and England Activities of Daily Living Scale (S-E, and Mini Mental State Examination (MMSE. Results. In women with PD, Kendall’s tau-b correlation analyses revealed significant correlations between functional performance tests and neurological assessment measures, with the exception in MMSE. No corresponding associations were found for men, although they demonstrated better functional performance, as expected. Conclusion. Men in similar clinical stage of the PD perform better on functional tests than women. Disease severity reflects upon functional performance differently in men and women with PD. Results indicate that when interpreting the assessment results of both functional performance and neurological assessment tests, the gender of the patient should be taken into consideration.

Input data required for specific performance assessment codes

International Nuclear Information System (INIS)

Seitz, R.R.; Garcia, R.S.; Starmer, R.J.; Dicke, C.A.; Leonard, P.R.; Maheras, S.J.; Rood, A.S.; Smith, R.W.

1992-02-01

The Department of Energy's National Low-Level Waste Management Program at the Idaho National Engineering Laboratory generated this report on input data requirements for computer codes to assist States and compacts in their performance assessments. This report gives generators, developers, operators, and users some guidelines on what input data is required to satisfy 22 common performance assessment codes. Each of the codes is summarized and a matrix table is provided to allow comparison of the various input required by the codes. This report does not determine or recommend which codes are preferable

Prediction of filamentous process performance attributes by CSL quality assessment using mid-infrared spectroscopy and chemometrics.

Science.gov (United States)

Hofer, Alexandra; Kamravamanesh, Donya; Bona-Lovasz, Judit; Limbeck, Andreas; Lendl, Bernhard; Herwig, Christoph; Fricke, Jens

2018-01-10

Every biopharmaceutical production process aims for control strategies to achieve process robustness in order to ensure consistent product quality. Process variability can origin from process parameters, the biological nature as well as from high lot-to-lot variability of raw materials. In filamentous processes raw materials with very complex matrices, such as corn steep liquor (CSL), are used, which are especially challenging to characterize. In this study, CSL was characterized in detail for its ingredients presenting an overall composition of its matrix of 50 analyzed components (19 amino acids, 5 organic acids, 8 reducing sugars, 7 water-soluble vitamins and 11 trace elements/minerals) in order to facilitate analytical reduction to fingerprinting methods FT-MIR was evaluated as fast and non-destructive spectroscopic fingerprinting method for adequate assessment of CSL quality. Feasibility of this method was shown by the correlation of certain bands in the spectra to substance groups present in CSL, such as the Amide I and II band and amino acids, respectively. Additionally, applicability of FT-MIR could be shown for classification of different CSL lots differing in provider and corn quality as well as for predictability of process performance attributes. The latter was demonstrated on a fed-batch filamentous fungi process for the production of antibiotics. By multivariate data analysis, it could be shown that CSL quality assessment via FT-MIR can be used for the prediction of maximal biomass generated in the process, with a correlation coefficient R 2 of 0.964, as well as for the prediction of an unwanted impurity. The combination of a fast and easy method for CSL quality assessment and correlations of this quality with process performance attributes may facilitate the establishment of a risk-based acceptance criteria for raw material quality release of CSL. As CSL is a frequent used raw material, we believe that this method will also be useful for other

Treatment of uncertainty in low-level waste performance assessment

International Nuclear Information System (INIS)

Kozak, M.W.; Olague, N.E.; Gallegos, D.P.; Rao, R.R.

1991-01-01

Uncertainties arise from a number of different sources in low-level waste performance assessment. In this paper the types of uncertainty are reviewed, and existing methods for quantifying and reducing each type of uncertainty are discussed. These approaches are examined in the context of the current low-level radioactive waste regulatory performance objectives, which are deterministic. The types of uncertainty discussed in this paper are model uncertainty, uncertainty about future conditions, and parameter uncertainty. The advantages and disadvantages of available methods for addressing uncertainty in low-level waste performance assessment are presented. 25 refs

Putting HLW performance assessment results in perspective

International Nuclear Information System (INIS)

Neall, F.; Smith, P.; Sumerling, T.; Umeki, H.

1995-01-01

According to performance assessment results for the different disposal concepts investigated, the maximum radiation doses to the population lie well below the limit set in the official Swiss Protection Objective and below the level of present-day natural background radiation. A comparison of different performance assessments has shown that the following key factors determine radionuclide release from a repository: radionuclide inventory, canister material and failure mode, nuclide solubility limits, the permeability of the buffer material, retardation during transport through the near-field, the presence of an excavation disturbed zone in the rock, the distance to the nearest major water-bearing fracture zone, the conceptual model for transport in fractured rock and near-surface dilution and dose factors. (author) 2 figs., 2 tabs

Peer mentoring in doctor performance assessment: strategies, obstacles and benefits.

NARCIS (Netherlands)

Overeem, K.; Driessen, E.W.; Arah, O.A.; Lombarts, K.M.; Wollersheim, H.C.H.; Grol, R.P.T.M.

2010-01-01

CONTEXT: Mentors are increasingly involved in doctor performance assessments. Mentoring seems to be a key determinant in achieving the ultimate goal of those assessments, namely, improving doctor performance. Little is known, however, about how mentors perceive and fulfil this role. OBJECTIVE: The

Peer mentoring in doctor performance assessment: strategies, obstacles and benefits

NARCIS (Netherlands)

Overeem, Karlijn; Driessen, Erik W.; Arah, Onyebuchi A.; Lombarts, Kiki M. J. M. H.; Wollersheim, Hub C.; Grol, Richard P. T. M.

2010-01-01

CONTEXT: Mentors are increasingly involved in doctor performance assessments. Mentoring seems to be a key determinant in achieving the ultimate goal of those assessments, namely, improving doctor performance. Little is known, however, about how mentors perceive and fulfil this role. OBJECTIVE: The

Multi-criteria decision making under uncertainty in building performance assessment

NARCIS (Netherlands)

Hopfe, C.J.; Augenbroe, G.; Hensen, J.L.M.

2013-01-01

Building performance assessment is complex, as it has to respond to multiple criteria. Objectives originating from the demands that are put on energy consumption, acoustical performance, thermal occupant comfort, indoor air quality and many other issues must all be reconciled. An assessment requires

42 CFR 460.136 - Internal quality assessment and performance improvement activities.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Internal quality assessment and performance improvement activities. 460.136 Section 460.136 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES....136 Internal quality assessment and performance improvement activities. (a) Quality assessment and...

Visual art teachers and performance assessment methods in ...

African Journals Online (AJOL)

This paper examines the competencies of visual arts teachers in using performance assessment methods, and to ascertain the extent to which the knowledge, skills and experiences of teachers affect their competence in using assessment strategies in their classroom. The study employs a qualitative research design; ...

42 CFR 486.348 - Condition: Quality assessment and performance improvement (QAPI).

Science.gov (United States)

2010-10-01

... Coverage: Organ Procurement Organizations Organ Procurement Organization Process Performance Measures § 486.348 Condition: Quality assessment and performance improvement (QAPI). The OPO must develop, implement... 42 Public Health 5 2010-10-01 2010-10-01 false Condition: Quality assessment and performance...

Twelve tips for assessing surgical performance and use of technical assessment scales

DEFF Research Database (Denmark)

Strandbygaard, Jeanett; Scheele, Fedde; Sørensen, Jette Led

2017-01-01

Using validated assessment scales for technical competence can help structure and standardize assessment and feedback for both the trainee and the supervisor and thereby avoid bias and drive learning. Correct assessment of operative skills can establish learning curves and allow adequate monitoring....... However, the assessment of surgical performance is not an easy task, since it includes many proxy parameters, which are hard to measure. Although numerous technical assessment scales exist, both within laparoscopic and open surgery, the validity evidence is often sparse, and this can raise doubts about...... reliability and educational outcome. Furthermore, the implementation of technical assessment scales varies due to several obstacles and doubts about accurate use. In this 12-tips article, we aim to give the readers a critical and useful appraisal of some of the common questions and misunderstandings regarding...

10 CFR 63.114 - Requirements for performance assessment.

Science.gov (United States)

2010-01-01

... processes of engineered barriers in the performance assessment, including those processes that would adversely affect the performance of natural barriers. Degradation, deterioration, or alteration processes of... surrounding region to the extent necessary, and information on the design of the engineered barrier system...

Performance Assessment of Communication Enhancement Devices TEA HI Threat Headset

Science.gov (United States)

2015-08-01

AFRL-RH-WP-TR-2015-0076 Performance Assessment of Communication Enhancement Devices: TEA HI Threat Headset Hilary L. Gallagher...of Communication Enhancement Devices: TEA HI Threat Headset 5a. CONTRACT NUMBER FA8650-14-D-6501 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER...technology in military applications. Objective performance data provided an assessment of the performance of these devices. The TEA HI Threat headset

Tax Performance Assessment in Scandinavian Countries

Directory of Open Access Journals (Sweden)

Bunescu Liliana

2015-04-01

Full Text Available The aim of this paper is to evaluate fiscal policy performance level in Nordic countries of Europe by quantifying the gap between their performance and an optimum benchmark value. In this study it was selected Denmark, Finland, Sweden and Norway. These countries occupy the first places in the ranking of countries with the highest rate of tax burden in Europe. The first part of paper contains general aspects of fiscal performance in international research and an overview of the Nordic tax systems model. The second part of paper focuses on evaluation of tax policy performance in these countries by using OptimTax scoring analysis. The research is based on a multivariate analysis instrument that uses quantitative data on various aspects of tax policy. OptimTax achieves a score for assessing the degree of optimization of fiscal policy. The results reveal high levels of tax performance in Scandinavian countries and a trend that seems to be more constant than ascending, except Norway.

Assessing students' performance in software requirements engineering education using scoring rubrics

Science.gov (United States)

Mkpojiogu, Emmanuel O. C.; Hussain, Azham

2017-10-01

The study investigates how helpful the use of scoring rubrics is, in the performance assessment of software requirements engineering students and whether its use can lead to students' performance improvement in the development of software requirements artifacts and models. Scoring rubrics were used by two instructors to assess the cognitive performance of a student in the design and development of software requirements artifacts. The study results indicate that the use of scoring rubrics is very helpful in objectively assessing the performance of software requirements or software engineering students. Furthermore, the results revealed that the use of scoring rubrics can also produce a good achievement assessments direction showing whether a student is either improving or not in a repeated or iterative assessment. In a nutshell, its use leads to the performance improvement of students. The results provided some insights for further investigation and will be beneficial to researchers, requirements engineers, system designers, developers and project managers.

An Empirical Study of a Solo Performance Assessment Model

Science.gov (United States)

Russell, Brian E.

2015-01-01

The purpose of this study was to test a hypothesized model of solo music performance assessment. Specifically, this study investigates the influence of technique and musical expression on perceptions of overall performance quality. The Aural Musical Performance Quality (AMPQ) measure was created to measure overall performance quality, technique,…

Quality assurance in performance assessments

Energy Technology Data Exchange (ETDEWEB)

Maul, P.R.; Watkins, B.M.; Salter, P.; Mcleod, R [QuantiSci Ltd, Henley-on-Thames (United Kingdom)

1999-01-01

Following publication of the Site-94 report, SKI wishes to review how Quality Assurance (QA) issues could be treated in future work both in undertaking their own Performance Assessment (PA) calculations and in scrutinising documents supplied by SKB (on planning a repository for spent fuels in Sweden). The aim of this report is to identify the key QA issues and to outline the nature and content of a QA plan which would be suitable for SKI, bearing in mind the requirements and recommendations of relevant standards. Emphasis is on issues which are specific to Performance Assessments for deep repositories for radioactive wastes, but consideration is also given to issues which need to be addressed in all large projects. Given the long time over which the performance of a deep repository system must be evaluated, the demonstration that a repository is likely to perform satisfactorily relies on the use of computer-generated model predictions of system performance. This raises particular QA issues which are generally not encountered in other technical areas (for instance, power station operations). The traceability of the arguments used is a key QA issue, as are conceptual model uncertainty, and code verification and validation; these were all included in the consideration of overall uncertainties in the Site-94 project. Additionally, issues which are particularly relevant to SKI include: How QA in a PA fits in with the general QA procedures of the organisation undertaking the work. The relationship between QA as applied by the regulator and the implementor of a repository development programme. Section 2 introduces the discussion of these issues by reviewing the standards and guidance which are available from national and international organisations. This is followed in Section 3 by a review of specific issues which arise from the Site-94 exercise. An outline procedure for managing QA issues in SKI is put forward as a basis for discussion in Section 4. It is hoped that

Quality assurance in performance assessments

International Nuclear Information System (INIS)

Maul, P.R.; Watkins, B.M.; Salter, P.; Mcleod, R

1999-01-01

Following publication of the Site-94 report, SKI wishes to review how Quality Assurance (QA) issues could be treated in future work both in undertaking their own Performance Assessment (PA) calculations and in scrutinising documents supplied by SKB (on planning a repository for spent fuels in Sweden). The aim of this report is to identify the key QA issues and to outline the nature and content of a QA plan which would be suitable for SKI, bearing in mind the requirements and recommendations of relevant standards. Emphasis is on issues which are specific to Performance Assessments for deep repositories for radioactive wastes, but consideration is also given to issues which need to be addressed in all large projects. Given the long time over which the performance of a deep repository system must be evaluated, the demonstration that a repository is likely to perform satisfactorily relies on the use of computer-generated model predictions of system performance. This raises particular QA issues which are generally not encountered in other technical areas (for instance, power station operations). The traceability of the arguments used is a key QA issue, as are conceptual model uncertainty, and code verification and validation; these were all included in the consideration of overall uncertainties in the Site-94 project. Additionally, issues which are particularly relevant to SKI include: How QA in a PA fits in with the general QA procedures of the organisation undertaking the work. The relationship between QA as applied by the regulator and the implementor of a repository development programme. Section 2 introduces the discussion of these issues by reviewing the standards and guidance which are available from national and international organisations. This is followed in Section 3 by a review of specific issues which arise from the Site-94 exercise. An outline procedure for managing QA issues in SKI is put forward as a basis for discussion in Section 4. It is hoped that

Performance Characterization and Auto-Ignition Performance of a Rapid Compression Machine

Directory of Open Access Journals (Sweden)

Hao Liu

2014-09-01

Full Text Available A rapid compression machine (RCM test bench is developed in this study. The performance characterization and auto-ignition performance tests are conducted at an initial temperature of 293 K, a compression ratio of 9.5 to 16.5, a compressed temperature of 650 K to 850 K, a driving gas pressure range of 0.25 MPa to 0.7 MPa, an initial pressure of 0.04 MPa to 0.09 MPa, and a nitrogen dilution ratio of 35% to 65%. A new type of hydraulic piston is used to address the problem in which the hydraulic buffer adversely affects the rapid compression process. Auto-ignition performance tests of the RCM are then performed using a DME–O2–N2 mixture. The two-stage ignition delay and negative temperature coefficient (NTC behavior of the mixture are observed. The effects of driving gas pressure, compression ratio, initial pressure, and nitrogen dilution ratio on the two-stage ignition delay are investigated. Results show that both the first-stage and overall ignition delays tend to increase with increasing driving gas pressure. The driving gas pressure within a certain range does not significantly influence the compressed pressure. With increasing compression ratio, the first-stage ignition delay is shortened, whereas the second-stage ignition delay is extended. With increasing initial pressure, both the first-stage and second-stage ignition delays are shortened. The second-stage ignition delay is shortened to a greater extent than that of the first-stage. With increasing nitrogen dilution ratio, the first-stage ignition delay is shortened, whereas the second-stage is extended. Thus, overall ignition delay presents different trends under various compression ratios and compressed pressure conditions.

Sorption databases for increasing confidence in performance assessment - 16053

International Nuclear Information System (INIS)

Richter, Anke; Brendler, Vinzenz; Nebelung, Cordula; Payne, Timothy E.; Brasser, Thomas

2009-01-01

requires that all mineral constituents of the solid phase are characterized. Another issue is the large number of required parameters combined with time-consuming iterations. Addressing both approaches, we present two sorption databases, developed mainly by or under participation of the Forschungszentrum Dresden-Rossendorf (FZD). Both databases are implemented as relational databases, assist identification of critical data gaps and the evaluation of existing parameter sets, provide web based data search and analyses and permit the comparison of SCM predictions with K d values. RES 3 T (Rossendorf Expert System for Surface and Sorption Thermodynamics) is a digitized thermodynamic sorption database (see www.fzd.de/db/RES3T.login) and free of charge. It is mineral-specific and can therefore also be used for additive models of more complex solid phases. ISDA (Integrated Sorption Database System) connects SCM with the K d concept but focuses on conventional K d . The integrated datasets are accessible through a unified user interface. An application case, K d values in Performance Assessment, is given. (authors)

Assessment of Work Performance (AWP)--development of an instrument.

Science.gov (United States)

Sandqvist, Jan L; Törnquist, Kristina B; Henriksson, Chris M

2006-01-01

Adequate work assessments are a matter of importance both for individuals and society [5,29,31,38,40,46,52]. However, there is a lack of adequate and reliable instruments for use in work rehabilitation [14,15,20,21,31,44]. The purpose of this study was to develop and evaluate an observation instrument for assessing work performance, the AWP (Assessment of Work Performance). The purpose of the 14-item instrument is to assess the individual's observable working skills in three different areas: motor skills, process skills, and communication and interaction skills. This article describes the development and results of preliminary testing of the AWP. The testing indicates a satisfactory face validity and utility for the AWP and supports further research and testing of the instrument.

Factors for Consideration in an Open-Flame Test for Assessing Fire Blocking Performance of Barrier Fabrics

Directory of Open Access Journals (Sweden)

Shonali Nazaré

2016-09-01

Full Text Available The main objective of the work reported here is to assess factors that could affect the outcome of a proposed open flame test for barrier fabrics (BF-open flame test. The BF-open flame test characterizes barrier effectiveness by monitoring the ignition of a flexible polyurethane foam (FPUF layer placed in contact with the upper side of the barrier fabric, exposed to a burner flame from below. Particular attention is given to the factors that influence the ignitibility of the FPUF, including thermal resistance, permeability, and structural integrity of the barrier fabrics (BFs. A number of barrier fabrics, displaying a wide range of the properties, are tested with the BF-open flame test. Visual observations of the FPUF burning behavior and BF char patterns, in addition to heat flux measurements on the unexposed side of the barrier fabrics, are used to assess the protective performance of the BF specimen under the open flame test conditions. The temperature and heat transfer measurements on the unexposed side of the BF and subsequent ranking of BFs for their thermal protective performance suggest that the BF-open flame test does not differentiate barrier fabrics based on their heat transfer properties. A similar conclusion is reached with regard to BF permeability characterized at room temperature. However, the outcome of this BF-open flame test is found to be heavily influenced by the structural integrity of thermally degraded BF. The BF-open flame test, in its current form, only ignited FPUF when structural failure of the barrier was observed.

Performance assessment of gamma cameras. Part 1

International Nuclear Information System (INIS)

Elliot, A.T.; Short, M.D.; Potter, D.C.; Barnes, K.J.

1980-11-01

The Dept. of Health and Social Security and the Scottish Home and Health Dept. has sponsored a programme of measurements of the important performance characteristics of 15 leading types of gamma cameras providing a routine radionuclide imaging service in hospitals throughout the UK. Measurements have been made of intrinsic resolution, system resolution, non-uniformity, spatial distortion, count rate performance, sensitivity, energy resolution and shield leakage. The main aim of this performance assessment was to provide sound information to the NHS to ease the task of those responsible for the purchase of gamma cameras. (U.K.)

Hanford immobilized low-activity tank waste performance assessment

International Nuclear Information System (INIS)

Mann, F.M.

1998-01-01

The Hanford Immobilized Low-Activity Tank Waste Performance Assessment examines the long-term environmental and human health effects associated with the planned disposal of the vitrified low-level fraction of waste presently contained in Hanford Site tanks. The tank waste is the by-product of separating special nuclear materials from irradiated nuclear fuels over the past 50 years. This waste has been stored in underground single and double-shell tanks. The tank waste is to be retrieved, separated into low and high-activity fractions, and then immobilized by private vendors. The US Department of Energy (DOE) will receive the vitrified waste from private vendors and plans to dispose of the low-activity fraction in the Hanford Site 200 East Area. The high-level fraction will be stored at Hanford until a national repository is approved. This report provides the site-specific long-term environmental information needed by the DOE to issue a Disposal Authorization Statement that would allow the modification of the four existing concrete disposal vaults to provide better access for emplacement of the immobilized low-activity waste (ILAW) containers; filling of the modified vaults with the approximately 5,000 ILAW containers and filler material with the intent to dispose of the containers; construction of the first set of next-generation disposal facilities. The performance assessment activity will continue beyond this assessment. The activity will collect additional data on the geotechnical features of the disposal sites, the disposal facility design and construction, and the long-term performance of the waste. Better estimates of long-term performance will be produced and reviewed on a regular basis. Performance assessments supporting closure of filled facilities will be issued seeking approval of those actions necessary to conclude active disposal facility operations. This report also analyzes the long-term performance of the currently planned disposal system as a basis

Hanford immobilized low-activity tank waste performance assessment

Energy Technology Data Exchange (ETDEWEB)

Mann, F.M.

1998-03-26

The Hanford Immobilized Low-Activity Tank Waste Performance Assessment examines the long-term environmental and human health effects associated with the planned disposal of the vitrified low-level fraction of waste presently contained in Hanford Site tanks. The tank waste is the by-product of separating special nuclear materials from irradiated nuclear fuels over the past 50 years. This waste has been stored in underground single and double-shell tanks. The tank waste is to be retrieved, separated into low and high-activity fractions, and then immobilized by private vendors. The US Department of Energy (DOE) will receive the vitrified waste from private vendors and plans to dispose of the low-activity fraction in the Hanford Site 200 East Area. The high-level fraction will be stored at Hanford until a national repository is approved. This report provides the site-specific long-term environmental information needed by the DOE to issue a Disposal Authorization Statement that would allow the modification of the four existing concrete disposal vaults to provide better access for emplacement of the immobilized low-activity waste (ILAW) containers; filling of the modified vaults with the approximately 5,000 ILAW containers and filler material with the intent to dispose of the containers; construction of the first set of next-generation disposal facilities. The performance assessment activity will continue beyond this assessment. The activity will collect additional data on the geotechnical features of the disposal sites, the disposal facility design and construction, and the long-term performance of the waste. Better estimates of long-term performance will be produced and reviewed on a regular basis. Performance assessments supporting closure of filled facilities will be issued seeking approval of those actions necessary to conclude active disposal facility operations. This report also analyzes the long-term performance of the currently planned disposal system as a basis

Assessing vocal performance in complex birdsong: a novel approach.

Science.gov (United States)

Geberzahn, Nicole; Aubin, Thierry

2014-08-06

Vocal performance refers to the ability to produce vocal signals close to physical limits. Such motor skills can be used by conspecifics to assess a signaller's competitive potential. For example it is difficult for birds to produce repeated syllables both rapidly and with a broad frequency bandwidth. Deviation from an upper-bound regression of frequency bandwidth on trill rate has been widely used to assess vocal performance. This approach is, however, only applicable to simple trilled songs, and even then may be affected by differences in syllable complexity. Using skylarks (Alauda arvensis) as a birdsong model with a very complex song structure, we detected another performance trade-off: minimum gap duration between syllables was longer when the frequency ratio between the end of one syllable and the start of the next syllable (inter-syllable frequency shift) was large. This allowed us to apply a novel measure of vocal performance ¿ vocal gap deviation: the deviation from a lower-bound regression of gap duration on inter-syllable frequency shift. We show that skylarks increase vocal performance in an aggressive context suggesting that this trait might serve as a signal for competitive potential. We suggest using vocal gap deviation in future studies to assess vocal performance in songbird species with complex structure.

Performance and Cognitive Assessment in 3-D Modeling

Science.gov (United States)

Fahrer, Nolan E.; Ernst, Jeremy V.; Branoff, Theodore J.; Clark, Aaron C.

2011-01-01

The purpose of this study was to investigate identifiable differences between performance and cognitive assessment scores in a 3-D modeling unit of an engineering drafting course curriculum. The study aimed to provide further investigation of the need of skill-based assessments in engineering/technical graphics courses to potentially increase…

Tajikistan - Public Expenditure and Financial Accountability Assessment : Performance Report

OpenAIRE

World Bank

2007-01-01

This assessment is based on work undertaken between October 2006 and May 2007. The summary assessment covers the following three areas: an integrated assessment of PFM performance based on the 28+3 PEFA indicators, an assessment of the impact of PFM weaknesses, and the prospects for reform planning and implementation. The main report consists of four sections: an introduction, the country ...

Predictors of student performance on the Pharmacy Curriculum Outcomes Assessment at a new school of pharmacy using admissions and demographic data.

Science.gov (United States)

Gillette, Chris; Rudolph, Michael; Rockich-Winston, Nicole; Blough, Eric R; Sizemore, James A; Hao, Jinsong; Booth, Chris; Broedel-Zaugg, Kimberly; Peterson, Megan; Anderson, Stephanie; Riley, Brittany; Train, Brian C; Stanton, Robert B; Anderson, H Glenn

To characterize student performance on the Pharmacy Curriculum Outcomes Assessment (PCOA) and to determine the significance of specific admissions criteria and pharmacy school performance to predict student performance on the PCOA during the first through third professional years. Multivariate linear regression models were developed to study the relationships between various independent variables and students' PCOA total scores during the first through third professional years. To date, four cohorts have successfully taken the PCOA examination. Results indicate that the Pharmacy College Admissions Test (PCAT), the Health Science Reasoning Test (HSRT), and cumulative pharmacy grade point average were the only consistent significant predictors of higher PCOA total scores across all students who have taken the exam at our school of pharmacy. The school should examine and clarify the role of PCOA within its curricular assessment program. Results suggest that certain admissions criteria and performance in pharmacy school are associated with higher PCOA scores. Copyright © 2016 Elsevier Inc. All rights reserved.

A Valid and Reliable Tool to Assess Nursing Students` Clinical Performance

OpenAIRE

Mehrnoosh Pazargadi; Tahereh Ashktorab; Sharareh Khosravi; Hamid Alavi majd

2013-01-01

Background: The necessity of a valid and reliable assessment tool is one of the most repeated issues in nursing students` clinical evaluation. But it is believed that present tools are not mostly valid and can not assess students` performance properly.Objectives: This study was conducted to design a valid and reliable assessment tool for evaluating nursing students` performance in clinical education.Methods: In this methodological study considering nursing students` performance definition; th...

Hydrological performance assessment on siting the high level radioactive waste repository

International Nuclear Information System (INIS)

Guo Yonghai; Liu Shufen; Wang Ju; Wang Zhiming; Su Rui; Lv Chuanhe; Zong Zihua

2007-01-01

Based on the research experiences in China and some developed countries in the world, the processes and methods on hydrological performance assessment for the siting of high radioactive repository are discussed in this paper. The methods and contents of hydrological performance assessment are discussed respectively for region, area and site hydrological investigation stages. At the same time, the hydrological performance assessment of the potential site for high level radioactive waste in China is introduced. (authors)

Performance assessment of diffuse optical spectroscopic imaging instruments in a 2-year multicenter breast cancer trial

Science.gov (United States)

Leproux, Anaïs; O'Sullivan, Thomas D.; Cerussi, Albert; Durkin, Amanda; Hill, Brian; Hylton, Nola; Yodh, Arjun G.; Carp, Stefan A.; Boas, David; Jiang, Shudong; Paulsen, Keith D.; Pogue, Brian; Roblyer, Darren; Yang, Wei; Tromberg, Bruce J.

2017-12-01

We present a framework for characterizing the performance of an experimental imaging technology, diffuse optical spectroscopic imaging (DOSI), in a 2-year multicenter American College of Radiology Imaging Network (ACRIN) breast cancer study (ACRIN-6691). DOSI instruments combine broadband frequency-domain photon migration with time-independent near-infrared (650 to 1000 nm) spectroscopy to measure tissue absorption and reduced scattering spectra and tissue hemoglobin, water, and lipid composition. The goal of ACRIN-6691 was to test the effectiveness of optically derived imaging endpoints in predicting the final pathologic response of neoadjuvant chemotherapy (NAC). Sixty patients were enrolled over a 2-year period at participating sites and received multiple DOSI scans prior to and during 3- to 6-month NAC. The impact of three sources of error on accuracy and precision, including different operators, instruments, and calibration standards, was evaluated using a broadband reflectance standard and two different solid tissue-simulating optical phantoms. Instruments showed <0.0010 mm-1 (10.3%) and 0.06 mm-1 (4.7%) deviation in broadband absorption and reduced scattering, respectively, over the 2-year duration of ACRIN-6691. These variations establish a useful performance criterion for assessing instrument stability. The proposed procedures and tests are not limited to DOSI; rather, they are intended to provide methods to characterize performance of any instrument used in translational optical imaging.

Student Self-Assessment and Faculty Assessment of Performance in an Interprofessional Error Disclosure Simulation Training Program.

Science.gov (United States)

Poirier, Therese I; Pailden, Junvie; Jhala, Ray; Ronald, Katie; Wilhelm, Miranda; Fan, Jingyang

2017-04-01

Objectives. To conduct a prospective evaluation for effectiveness of an error disclosure assessment tool and video recordings to enhance student learning and metacognitive skills while assessing the IPEC competencies. Design. The instruments for assessing performance (planning, communication, process, and team dynamics) in interprofessional error disclosure were developed. Student self-assessment of performance before and after viewing the recordings of their encounters were obtained. Faculty used a similar instrument to conduct real-time assessments. An instrument to assess achievement of the Interprofessional Education Collaborative (IPEC) core competencies was developed. Qualitative data was reviewed to determine student and faculty perceptions of the simulation. Assessment. The interprofessional simulation training involved a total of 233 students (50 dental, 109 nursing and 74 pharmacy). Use of video recordings made a significant difference in student self-assessment for communication and process categories of error disclosure. No differences in student self-assessments were noted among the different professions. There were differences among the family member affects for planning and communication for both pre-video and post-video data. There were significant differences between student self-assessment and faculty assessment for all paired comparisons, except communication in student post-video self-assessment. Students' perceptions of achievement of the IPEC core competencies were positive. Conclusion. The use of assessment instruments and video recordings may have enhanced students' metacognitive skills for assessing performance in interprofessional error disclosure. The simulation training was effective in enhancing perceptions on achievement of IPEC core competencies. This enhanced assessment process appeared to enhance learning about the skills needed for interprofessional error disclosure.

Functional Performance and Associations between Performance Tests and Neurological Assessment Differ in Men and Women with Parkinson’s Disease

OpenAIRE

Medijainen, Kadri; Pääsuke, Mati; Lukmann, Aet; Taba, Pille

2015-01-01

Background. Neurological assessment of a patient with Parkinson's disease (PD) is expected to reflect upon functional performance. As women are known to report more limitations even for same observed functional performance level, present study was designed to examine whether associations between neurological assessments and functional performance differ across genders. Methods. 14 men and 14 women with PD participated. Functional performance was assessed by measuring walking speeds on 10-mete...

Radiological performance assessment for the E-Area Vaults Disposal Facility

International Nuclear Information System (INIS)

Cook, J.R.

1994-01-01

These document contains appendices A-M for the performance assessment. They are A: details of models and assumptions, B: computer codes, C: data tabulation, D: geochemical interactions, E: hydrogeology of the Savannah River Site, F: software QA plans, G: completeness review guide, H: performance assessment peer review panel recommendations, I: suspect soil performance analysis, J: sensitivity/uncertainty analysis, K: vault degradation study, L: description of naval reactor waste disposal, M: porflow input file

Performance Analysis of the Capability Assessment Tool for Sustainable Manufacturing

Directory of Open Access Journals (Sweden)

Enda Crossin

2013-08-01

Full Text Available This paper explores the performance of a novel capability assessment tool, developed to identify capability gaps and associated training and development requirements across the supply chain for environmentally-sustainable manufacturing. The tool was developed to assess 170 capabilities that have been clustered with respect to key areas of concern such as managing energy, water, material resources, carbon emissions and waste as well as environmental management practices for sustainability. Two independent expert teams used the tool to assess a sample group of five first and second tier sports apparel and footwear suppliers within the supply chain of a global sporting goods manufacturer in Asia. The paper addresses the reliability and robustness of the developed assessment method by formulating the expected links between the assessment results. The management practices of the participating suppliers were shown to be closely connected to their performance in managing their resources and emissions. The companies’ initiatives in implementing energy efficiency measures were found to be generally related to their performance in carbon emissions management. The suppliers were also asked to undertake a self-assessment by using a short questionnaire. The large gap between the comprehensive assessment and these in-house self-assessments revealed the suppliers’ misconceptions about their capabilities.

Whole-body MRI for full assessment and characterization of diffuse inflammatory myopathy

Directory of Open Access Journals (Sweden)

Saleh Saleh Elessawy

2016-09-01

Full Text Available Background Conventional magnetic resonance imaging (MRI is a highly valuable tool for full assessment of the extent of bilateral symmetrical diffuse inflammatory myopathy, owing to its high sensitivity in the detection of edema which correlates with, and sometimes precedes, clinical findings. Purpose To evaluate the use of whole-body (WB-MRI in characterization and full assessment of the extent and distribution of diffuse inflammatory myopathy. Material and Methods A prospective study on 15 patients presenting with clinical evidence of inflammatory myopathy. It included 4 boys/men and 11 girls/women (age range, 6–44 years; mean age, 25.5 years. 1.5 T WB-MRI was performed and the distribution and extent of disease severity was assessed according to muscle edema on STIR images. Results Four cases of dermatomyositis showed lower limb disease predilection with edema in gluteal, thigh, and calf muscles. The same finding was seen in one case with recurrent polymyositis and three cases with overlap myositis with systemic lupus erythematosus (SLE. Bilateral upper and lower limb myositis was demonstrated in three cases of polymyositis and one case of overlap myositis with scleroderma. Bilateral edema involving all scanned muscle groups was detected in three cases of polymyositis with paraneoplastic syndrome, SLE, and severe active dermatomyositis (including the neck muscles. Conclusion WB-MRI is the diagnostic modality of choice for cases of inflammatory myopathy. It accurately detects the most severely affected muscles candidate for biopsy and provides a reliable baseline study for follow-up of disease progression as well as response to treatment.

Performance Demonstration Program Plan for Nondestructive Assay of Drummed Wastes for the TRU Waste Characterization Program

International Nuclear Information System (INIS)

DOE Carlsbad Field Office

2001-01-01

The Performance Demonstration Program (PDP) for nondestructive assay (NDA) consists of a series of tests to evaluate the capability for NDA of transuranic (TRU) waste throughout the Department of Energy (DOE) complex. Each test is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements obtained from NDA systems used to characterize the radiological constituents of TRU waste. The primary documents governing the conduct of the PDP are the Waste Acceptance Criteria for the Waste Isolation Pilot Plant (WAC; DOE 1999a) and the Quality Assurance Program Document (QAPD; DOE 1999b). The WAC requires participation in the PDP; the PDP must comply with the QAPD and the WAC. The WAC contains technical and quality requirements for acceptable NDA. This plan implements the general requirements of the QAPD and applicable requirements of the WAC for the NDA PDP. Measurement facilities demonstrate acceptable performance by the successful testing of simulated waste containers according to the criteria set by this PDP Plan. Comparison among DOE measurement groups and commercial assay services is achieved by comparing the results of measurements on similar simulated waste containers reported by the different measurement facilities. These tests are used as an independent means to assess the performance of measurement groups regarding compliance with established quality assurance objectives (QAO's). Measurement facilities must analyze the simulated waste containers using the same procedures used for normal waste characterization activities. For the drummed waste PDP, a simulated waste container consists of a 55-gallon matrix drum emplaced with radioactive standards and fabricated matrix inserts. These PDP sample components are distributed to the participating measurement facilities that have been designated and authorized by the Carlsbad Field Office (CBFO). The NDA Drum PDP materials are stored at these sites under secure conditions to

Performance of upper gastrointestinal bleeding risk assessment scores in variceal bleeding

DEFF Research Database (Denmark)

Ngu, JH; Laursen, Stig Borbjerg; Chin, YK

2017-01-01

Performance of upper gastrointestinal bleeding risk assessment scores in variceal bleeding: a prospective international multicenter study.......Performance of upper gastrointestinal bleeding risk assessment scores in variceal bleeding: a prospective international multicenter study....

Peer assessment of aviation performance: inconsistent for good reasons.

Science.gov (United States)

Roth, Wolff-Michael; Mavin, Timothy J

2015-03-01

Research into expertise is relatively common in cognitive science concerning expertise existing across many domains. However, much less research has examined how experts within the same domain assess the performance of their peer experts. We report the results of a modified think-aloud study conducted with 18 pilots (6 first officers, 6 captains, and 6 flight examiners). Pairs of same-ranked pilots were asked to rate the performance of a captain flying in a critical pre-recorded simulator scenario. Findings reveal (a) considerable variance within performance categories, (b) differences in the process used as evidence in support of a performance rating, (c) different numbers and types of facts (cues) identified, and (d) differences in how specific performance events affect choice of performance category and gravity of performance assessment. Such variance is consistent with low inter-rater reliability. Because raters exhibited good, albeit imprecise, reasons and facts, a fuzzy mathematical model of performance rating was developed. The model provides good agreement with observed variations. Copyright © 2014 Cognitive Science Society, Inc.

Biological assessment for rare and endangered plant species: Related to CERCLA characterization activities

International Nuclear Information System (INIS)

Sackschewsky, M.R.

1992-04-01

Environmental characterization in support of hazardous, radioactive, and mixed waste cleanup (in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act of 1980) can involve a large number of both nonintrusive and intrusive activities. Many of these activities could have a detrimental impact on listed plant species. These impacts can be minimized by following simple conservation policies while conducting the various field activities. For instance, frequent off-road vehicular traffic and have a severe impact on native habitats and, therefore, should be kept to a minimum. Personnel performing the field activities should be trained to preserve, respect, and minimize their impact on native habitat while performing work in the field. In addition, areas where sampling is planned should be surveyed for the presence of listed plant species before the initiation of the field activities. Extremely distributed areas could be exempted from this requirement provided adequate habitat assessments have been performed by qualified personnel. Twelve special status plant species are known to survive on or very near the Hanford Site. None of these species currently are listed as Federal Threatened or Endangered Species. However, four local species currently are candidates for federal protection. These species are the Northern Wormwood (Artemisia campestris ssp. borealis var. wormskioldii), Persistantsepal Yellowcress (Rorippa columbiae), Hoover's Desert Parsley (Lomatium tuberosum), and Columbia Milkvetch (Astragalus columbianus)

Competency-based assessment in surgeon-performed head and neck ultrasonography

DEFF Research Database (Denmark)

Todsen, Tobias; Melchiors, Jacob; Charabi, Birgitte

2017-01-01

and to establish validity evidence for an objective structured assessment of ultrasound skills (OSAUS) used for competency-based assessment. STUDY DESIGN: A prospective experimental study. METHODS: Six otolaryngologists and 11 US novices were included in a standardized test setup for which they had to perform...... and the diagnostic accuracy was found (Spearman's ρ, 0.85; P competence with good reliability, significant discrimination between US competence levels, and a strong...... correlation of assessment score to diagnostic accuracy. An OSAUS pass/fail score was established and could be used for competence-based assessment in surgeon-performed HNUS. LEVEL OF EVIDENCE: NA. Laryngoscope, 2017....

Relationship Between Academic Performance and Student Self-Assessment of Clinical Performance in the College of Podiatric Medicine and Surgery.

Science.gov (United States)

Yoho, Robert M; Vardaxis, Vassilios; Millonig, Kelsey

2016-05-01

Student self-assessment is viewed as an important tool in medical education. We sought to identify the relationship between student academic performance and third-year clinical performance self-assessment. No such study exists in podiatric medical education. Third-year podiatric medical students from the classes of 2012 through 2014 completed a self-assessment of their performance for each of five broad clinical podiatric medical domains (Professionalism, Medicine, Radiology, Surgery, and Biomechanics/Orthopedics). The assessment was completed after students finished the first 12 weeks of their third-year clinical rotations (PRE) and a second time at the conclusion of the third year (POST). The mean self-assessment score for PRE and POST surveys for all combined domains was determined for each student. This mean was compared with the student's 3-year cumulative grade point average (GPA). Students' clinical experiences for the year were essentially identical. No statistically significant correlation was identified between cumulative GPA and the PRE and POST clinical self-assessments or with the change between PRE and POST assessments based on the Pearson correlation test for each class separately or on the pooled data. Published studies in allopathic medical education have shown that students with lower GPAs tend to rate their clinical performance higher in initial clinical performance self-assessment. Our results show that student academic performance was not correlated with clinical performance self-assessment. These findings may be due to the explicit description of successful clinical competency completion, the orientation students receive before the start of clinical training, and the continuous feedback received from clinical preceptors.

The Empirical Testing of a Musical Performance Assessment Paradigm

Science.gov (United States)

Russell, Brian E.

2010-01-01

The purpose of this study was to test a hypothesized model of aurally perceived performer-controlled musical factors that influence assessments of performance quality. Previous research studies on musical performance constructs, musical achievement, musical expression, and scale construction were examined to identify the factors that influence…

Cluster Detection Tests in Spatial Epidemiology: A Global Indicator for Performance Assessment.

Directory of Open Access Journals (Sweden)

Aline Guttmann

Full Text Available In cluster detection of disease, the use of local cluster detection tests (CDTs is current. These methods aim both at locating likely clusters and testing for their statistical significance. New or improved CDTs are regularly proposed to epidemiologists and must be subjected to performance assessment. Because location accuracy has to be considered, performance assessment goes beyond the raw estimation of type I or II errors. As no consensus exists for performance evaluations, heterogeneous methods are used, and therefore studies are rarely comparable. A global indicator of performance, which assesses both spatial accuracy and usual power, would facilitate the exploration of CDTs behaviour and help between-studies comparisons. The Tanimoto coefficient (TC is a well-known measure of similarity that can assess location accuracy but only for one detected cluster. In a simulation study, performance is measured for many tests. From the TC, we here propose two statistics, the averaged TC and the cumulated TC, as indicators able to provide a global overview of CDTs performance for both usual power and location accuracy. We evidence the properties of these two indicators and the superiority of the cumulated TC to assess performance. We tested these indicators to conduct a systematic spatial assessment displayed through performance maps.

Cluster Detection Tests in Spatial Epidemiology: A Global Indicator for Performance Assessment

Science.gov (United States)

Guttmann, Aline; Li, Xinran; Feschet, Fabien; Gaudart, Jean; Demongeot, Jacques; Boire, Jean-Yves; Ouchchane, Lemlih

2015-01-01

In cluster detection of disease, the use of local cluster detection tests (CDTs) is current. These methods aim both at locating likely clusters and testing for their statistical significance. New or improved CDTs are regularly proposed to epidemiologists and must be subjected to performance assessment. Because location accuracy has to be considered, performance assessment goes beyond the raw estimation of type I or II errors. As no consensus exists for performance evaluations, heterogeneous methods are used, and therefore studies are rarely comparable. A global indicator of performance, which assesses both spatial accuracy and usual power, would facilitate the exploration of CDTs behaviour and help between-studies comparisons. The Tanimoto coefficient (TC) is a well-known measure of similarity that can assess location accuracy but only for one detected cluster. In a simulation study, performance is measured for many tests. From the TC, we here propose two statistics, the averaged TC and the cumulated TC, as indicators able to provide a global overview of CDTs performance for both usual power and location accuracy. We evidence the properties of these two indicators and the superiority of the cumulated TC to assess performance. We tested these indicators to conduct a systematic spatial assessment displayed through performance maps. PMID:26086911

Assessing the performance of dynamical trajectory estimates

Science.gov (United States)

Bröcker, Jochen

2014-06-01

Estimating trajectories and parameters of dynamical systems from observations is a problem frequently encountered in various branches of science; geophysicists for example refer to this problem as data assimilation. Unlike as in estimation problems with exchangeable observations, in data assimilation the observations cannot easily be divided into separate sets for estimation and validation; this creates serious problems, since simply using the same observations for estimation and validation might result in overly optimistic performance assessments. To circumvent this problem, a result is presented which allows us to estimate this optimism, thus allowing for a more realistic performance assessment in data assimilation. The presented approach becomes particularly simple for data assimilation methods employing a linear error feedback (such as synchronization schemes, nudging, incremental 3DVAR and 4DVar, and various Kalman filter approaches). Numerical examples considering a high gain observer confirm the theory.

Improvement of biosphere assessment methodology for performance assessment of geological disposal facility. 2. Outline

International Nuclear Information System (INIS)

Miki, Takahito; Yoshida, Hideji; Ikeda, Takao

2002-02-01

This report contains results on study of Geosphere-Biosphere Interface (GBI), development of biosphere assessment model for gaseous and volatile radionuclides, review of biosphere assessment and research on safety indicators. Regarding study of Geosphere-Biosphere Interface (GBI), FEP database for the Geosphere-Biosphere Transitions Zone (GBTZ) were compiled. Furthermore, release scenarios were identified from the FEP database, and review of conservativeness and robustness of the conceptual and mathematical models developed previously by JNC were undertaken. Regarding development of biosphere assessment model for gaseous and volatile radionuclides, the conceptual and mathematical models were developed, and it was confirmed that the impact of the exposure pathway regarding gas release to flux-to-dose conversion factor is small. Regarding review of biosphere assessment data, the parameters which were used on JNC second progress report were reviewed and classified using the biosphere data protocol categories. Furthermore, the data for key parameter (important but poorly characterized parameters) were revised. Regarding research on safety indicator, some kinds of safety indicators, especially for the non-radioactive contaminant and for the non-human biota, are reviewed. (author)

Building quality into performance and safety assessment software

International Nuclear Information System (INIS)

Wojciechowski, L.C.

2011-01-01

Quality assurance is integrated throughout the development lifecycle for performance and safety assessment software. The software used in the performance and safety assessment of a Canadian deep geological repository (DGR) follows the CSA quality assurance standard CSA-N286.7 [1], Quality Assurance of Analytical, Scientific and Design Computer Programs for Nuclear Power Plants. Quality assurance activities in this standard include tasks such as verification and inspection; however, much more is involved in producing a quality software computer program. The types of errors found with different verification methods are described. The integrated quality process ensures that defects are found and corrected as early as possible. (author)

Assessing does not mean threatening: the purpose of assessment as a key determinant of girls' and boys' performance in a science class.

Science.gov (United States)

Souchal, Carine; Toczek, Marie-Christine; Darnon, Céline; Smeding, Annique; Butera, Fabrizio; Martinot, Delphine

2014-03-01

Is it possible to reach performance equality between boys and girls in a science class? Given the stereotypes targeting their groups in scientific domains, diagnostic contexts generally lower girls' performance and non-diagnostic contexts may harm boys' performance. The present study tested the effectiveness of a mastery-oriented assessment, allowing both boys and girls to perform at an optimal level in a science class. Participants were 120 boys and 72 girls (all high-school students). Participants attended a science lesson while expecting a performance-oriented assessment (i.e., an assessment designed to compare and select students), a mastery-oriented assessment (i.e., an assessment designed to help students in their learning), or no assessment of this lesson. In the mastery-oriented assessment condition, both boys and girls performed at a similarly high level, whereas the performance-oriented assessment condition reduced girls' performance and the no-assessment condition reduced boys' performance. One way to increase girls' performance on a science test without harming boys' performance is to present assessment as a tool for improving mastery rather than as a tool for comparing performances. © 2013 The British Psychological Society.

Performance assessment development for a LILW repository in Slovenia

International Nuclear Information System (INIS)

Zeleznik, N.; Mele, I.

2001-01-01

Simultaneously with the site selection process for a low and intermediate level radioactive waste (LILW) repository, the preliminary assessment of the influence of the specific disposal concept on the environment and on the population was developed. The performance assessment team, organized in 1997 by ARAO, prepared several basic studies in order to clarify the objectives of the performance and safety assessment (PA/SA) procedure. In 1999 also the first performance assessment of two safety cases (surface and underground) for generic site for a LILW repository was realized. In the year 2000 activities on PA/SA analyses continued. A systematic, generic list was prepared of all possible features, events and processes (FEP list) predictable for surface or underground LILW disposal in Slovenia. Recommended and selected were the most reliable scenarios with conceptual models for LILW disposal in normal and altered evolution conditions. New verification of the obtained results was done with more powerful and accurate models for the surface repository over an aquifer of lower water permeability and an underground repository in a plastic rock. The results for both generic cases under normal evolution scenarios showed that there is a negligible dose influence on members of the critical population due to the migration of radionuclides from the foreseen LILW repository. The results of the already performed work as well as plans for the future activities are presented in the paper.(author)

A strategy for the derivation and use of sorption coefficients in performance assessment calculations for the Yucca Mountain site

International Nuclear Information System (INIS)

Meijer, A.

1990-01-01

The chemical interactions of dissolved radionuclides with mineral surfaces along flowpaths from the proposed repository to the accessible environment around Yucca Mountain constitute one of the potential barriers to radionuclide migration at the site. Our limited understanding of these interactions suggests their details will be complex and will involve control by numerous chemical and physical parameters. It appears unlikely that we will understand all the details of these reactions or obtain all the site data required to evaluate each of them in the time available for site characterization. Yet, performance assessment calculations will require some form of coupling of chemical interaction models will hydrologic flow models for the site. Clearly, strategies will be needed to bound the problem without compromising the reliability of the performance assessment calculations required for site suitability analysis. The main purpose of this paper is to describe such a strategy. 39 refs., 7 figs., 5 tabs

THE PENA BLANCA NATURAL ANALOGUE PERFORMANCE ASSESSMENT MODEL

Energy Technology Data Exchange (ETDEWEB)

G.J. Saulnier Jr; W. Statham

2006-03-10

The Nopal I uranium mine in the Sierra Pena Blanca, Chihuahua, Mexico serves as a natural analogue to the Yucca Mountain repository. The Pena Blanca Natural Analogue Performance Assessment Model simulates the mobilization and transport of radionuclides that are released from the mine and transported to the saturated zone. the Pena Blanca Natural Analogue Model uses probabilistic simulations of hydrogeologic processes that are analogous to the processes that occur at the Yucca Mountain site. The Nopal I uranium deposit lies in fractured, welded, and altered rhyolitic ash flow tuffs that overlie carbonate rocks, a setting analogous to the geologic formations at the Yucca Mountain site. The Nopal I mine site has the following characteristics as compared to the Yucca Mountain repository site. (1) Analogous source: UO{sub 2} uranium ore deposit = spent nuclear fuel in the repository; (2) Analogous geologic setting: fractured, welded, and altered rhyolitic ash flow tuffs overlying carbonate rocks; (3) Analogous climate: Semiarid to arid; (4) Analogous geochemistry: Oxidizing conditions; and (5) Analogous hydrogeology: The ore deposit lies in the unsaturated zone above the water table. The Nopal I deposit is approximately 8 {+-} 0.5 million years old and has been exposed to oxidizing conditions during the last 3.2 to 3.4 million years. The Pena Blanca Natural Analogue Model considers that the uranium oxide and uranium silicates in the ore deposit were originally analogous to uranium-oxide spent nuclear fuel. The Pena Blanca site has been characterized using field and laboratory investigations of its fault and fracture distribution, mineralogy, fracture fillings, seepage into the mine adits, regional hydrology, and mineralization that shows the extent of radionuclide migration. Three boreholes were drilled at the Nopal I mine site in 2003 and these boreholes have provided samples for lithologic characterization, water-level measurements, and water samples for laboratory

THE PENA BLANCA NATURAL ANALOGUE PERFORMANCE ASSESSMENT MODEL

International Nuclear Information System (INIS)

G.J. Saulnier Jr; W. Statham

2006-01-01

The Nopal I uranium mine in the Sierra Pena Blanca, Chihuahua, Mexico serves as a natural analogue to the Yucca Mountain repository. The Pena Blanca Natural Analogue Performance Assessment Model simulates the mobilization and transport of radionuclides that are released from the mine and transported to the saturated zone. the Pena Blanca Natural Analogue Model uses probabilistic simulations of hydrogeologic processes that are analogous to the processes that occur at the Yucca Mountain site. The Nopal I uranium deposit lies in fractured, welded, and altered rhyolitic ash flow tuffs that overlie carbonate rocks, a setting analogous to the geologic formations at the Yucca Mountain site. The Nopal I mine site has the following characteristics as compared to the Yucca Mountain repository site. (1) Analogous source: UO 2 uranium ore deposit = spent nuclear fuel in the repository; (2) Analogous geologic setting: fractured, welded, and altered rhyolitic ash flow tuffs overlying carbonate rocks; (3) Analogous climate: Semiarid to arid; (4) Analogous geochemistry: Oxidizing conditions; and (5) Analogous hydrogeology: The ore deposit lies in the unsaturated zone above the water table. The Nopal I deposit is approximately 8 ± 0.5 million years old and has been exposed to oxidizing conditions during the last 3.2 to 3.4 million years. The Pena Blanca Natural Analogue Model considers that the uranium oxide and uranium silicates in the ore deposit were originally analogous to uranium-oxide spent nuclear fuel. The Pena Blanca site has been characterized using field and laboratory investigations of its fault and fracture distribution, mineralogy, fracture fillings, seepage into the mine adits, regional hydrology, and mineralization that shows the extent of radionuclide migration. Three boreholes were drilled at the Nopal I mine site in 2003 and these boreholes have provided samples for lithologic characterization, water-level measurements, and water samples for laboratory analysis

Spectroradiometer Intercomparison and Impact on Characterizing Photovoltaic Device Performance: Preprint

Energy Technology Data Exchange (ETDEWEB)

Habte, A.; Andreas, A.; Ottoson, L.; Gueymard, C.; Fedor, G.; Fowler, S.; Peterson, J.; Naranen, E.; Kobashi, T.; Akiyama, A.; Takagi, S.

2014-11-01

Indoor and outdoor testing of photovoltaic (PV) device performance requires the use of solar simulators and natural solar radiation, respectively. This performance characterization requires accurate knowledge of spectral irradiance distribution that is incident on the devices. Spectroradiometers are used to measure the spectral distribution of solar simulators and solar radiation. On September 17, 2013, a global spectral irradiance intercomparison using spectroradiometers was organized by the Solar Radiation Research Laboratory (SRRL) at the National Renewable Energy Laboratory (NREL). This paper presents highlights of the results of this first intercomparison, which will help to decrease systematic inter-laboratory differences in the measurements of the outputs or efficiencies of PV devices and harmonize laboratory experimental procedures.

SKI SITE-94. Deep Repository Performance Assessment Project. Summary

International Nuclear Information System (INIS)

1997-02-01

The function of SITE-94 is to provide the Swedish Nuclear Power Inspectorate (SKI) with the capacity and supporting knowledge needed for reviewing the Swedish nuclear industry's R and D programs and for reviewing license applications, as stipulated in Swedish legislation. The report is structured as a Performance Assessment exercise needed for input to decisions regarding repository safety, but the SITE-94 is neither a safety assessment nor a model for future assessments to be undertaken by the prospective licensee. The specific project objectives of SITE-94 comprise site evaluation, performance assessment methodology, canister integrity and radionuclide release and transport calculations. The main report (SKI-R--96-36) gives a detailed description of the many inter-related studies undertaken as part of the research project, while the present report presents a condensed summary of the main report. 46 refs

Impact Assessment of Abiotic Resources in LCA: Quantitative Comparison of Selected Characterization Models

DEFF Research Database (Denmark)

Rørbech, Jakob Thaysen; Vadenbo, Carl; Hellweg, Stefanie

2014-01-01

Resources have received significant attention in recent years resulting in development of a wide range of resource depletion indicators within life cycle assessment (LCA). Understanding the differences in assessment principles used to derive these indicators and the effects on the impact assessment...... results is critical for indicator selection and interpretation of the results. Eleven resource depletion methods were evaluated quantitatively with respect to resource coverage, characterization factors (CF), impact contributions from individual resources, and total impact scores. We included 2247...... groups, according to method focus and modeling approach, to aid method selection within LCA....

Performance Assessment of Low-Noise Road Surfaces in the Leopoldo Project: Comparison and Validation of Different Measurement Methods

Directory of Open Access Journals (Sweden)

Gaetano Licitra

2015-01-01

Full Text Available In almost all urban contexts and in many extra-urban conurbations, where road traffic is the main noise pollution source, the use of barriers is not allowed. In these cases, low-noise road surfaces are the most used mitigation action together with traffic flow reduction. Selecting the optimal surface is only the first problem that the public administration has to face. In the second place, it has to consider the issue of assessing the efficacy of the mitigation action. The purpose of the LEOPOLDO project was to improve the knowledge in the design and the characterization of low-noise road surfaces, producing guidelines helpful to the public administrations. Several experimental road surfaces were tested. Moreover, several measurement methods were implemented aiming to select those that are suitable for a correct assessment of the pavement performances laid as mitigation planning. In this paper, the experience gained in the LEOPOLDO project will be described, focusing on both the measurement methods adopted to assess the performance of a low-noise road surface and the criteria by which the experimental results have to be evaluated, presenting a comparison of the obtained results and their monitoring along time.

Tailored model abstraction in performance assessments

International Nuclear Information System (INIS)

Kessler, J.H.

1995-01-01

Total System Performance Assessments (TSPAs) are likely to be one of the most significant parts of making safety cases for the continued development and licensing of geologic repositories for the disposal of spent fuel and HLW. Thus, it is critical that the TSPA model capture the 'essence' of the physical processes relevant to demonstrating the appropriate regulation is met. But how much detail about the physical processes must be modeled and understood before there is enough confidence that the appropriate essence has been captured? In this summary the level of model abstraction that is required is discussed. Approaches for subsystem and total system performance analyses are outlined, and the role of best estimate models is examined. It is concluded that a conservative approach for repository performance, based on limited amount of field and laboratory data, can provide sufficient confidence for a regulatory decision

Assessment of the excitelet algorithm for in-situ mechanical characterization of orthotropic structures

Science.gov (United States)

Ostiguy, Pierre-Claude; Quaegebeur, Nicolas; Masson, Patrice

2012-04-01

Damage detection and localization on composites can be impaired by inaccurate knowledge of the mechanical properties of the structure. This paper demonstrates the feasibility of using a chirplet-based correlation technique, called Excitelet, to evaluate the mechanical properties of orthotropic carbon fibre-based composite laminates. The method relies on the identification of an optimal correlation coefficient between measured and simulated dispersed signals measured on a structure using piezoceramic (PZT) transducers. Finite Element Model (FEM) is first conducted to demonstrate the capability of the approach to evaluate the mechanical properties of a composite structure. Experimental validation is then conducted on a unidirectionnal 2.30 mm thick laminate composed of unidirectional plies and a 2.35 mm thick laminate composed of unidirectional plies oriented at [0, 90]4s. Surface bonded PZT transducers were used both for actuation and sensing of guided waves bursts measured at 0° and 90° with respect to upper ply fibre orientation. The characterization is performed at various frequencies below 100 kHz using A0 or S0 modes and comparison with the material properties measured following ASTM standard testing is presented. The results indicate that large correlation coefficients are obtained between the measurements and simulated signals for both A0 and S0 modes when accurate properties are used as inputs for the model. Strategies based on multiple modes correlation are also assessed in order to improve the accuracy of the characterization approach. The results obtained using the proposed approach for the unidirectional plate and most of the results obtained using the proposed approach for the [0, 90]4s laminate are in agreement with the uncertainty associated with ASTM tests results while the proposed method is non destructive and can be performed prior to each imaging processing.

Branch technical position for performance assessment of low-level radioactive waste disposal facilities

International Nuclear Information System (INIS)

Campbell, A.C.; Abramson, L.; Byrne, R.M.

1994-01-01

The U.S. Nuclear Regulatory Commission has developed a Draft Branch Technical Position on Performance Assessment of Low-Level Radioactive Waste Disposal Facilities. The draft technical position addresses important issues in performance assessment modeling and provides a framework and technical basis for conducting and evaluating performance assessments in a disposal facility license application. The technical position also addresses specific technical policy issues and augments existing NRC guidance pertaining to LLW performance assessment

Performance assessment task team progress report

International Nuclear Information System (INIS)

Wood, D.E.; Curl, R.U.; Armstrong, D.R.; Cook, J.R.; Dolenc, M.R.; Kocher, D.C.; Owens, K.W.; Regnier, E.P.; Roles, G.W.; Seitz, R.R.

1994-05-01

The U.S. Department of Energy (DOE) Headquarters EM-35, established a Performance Assessment Task Team (referred to as the Team) to integrate the activities of the sites that are preparing performance assessments (PAs) for disposal of new low-level waste, as required by Chapter III of DOE Order 5820.2A, open-quotes Low-Level Waste Managementclose quotes. The intent of the Team is to achieve a degree of consistency among these PAs as the analyses proceed at the disposal sites. The Team's purpose is to recommend policy and guidance to the DOE on issues that impact the PAs, including release scenarios and parameters, so that the approaches are as consistent as possible across the DOE complex. The Team has identified issues requiring attention and developed discussion papers for those issues. Some issues have been completed, and the recommendations are provided in this document. Other issues are still being discussed, and the status summaries are provided in this document. A major initiative was to establish a subteam to develop a set of test scenarios and parameters for benchmarking codes in use at the various sites. The activities of the Team are reported here through December 1993

Engaging the expert in public dialogue: Developing the role of performance assessment

International Nuclear Information System (INIS)

Littleboy, Anna; Hodgkinson, David

2001-01-01

Participatory approaches to decision-making call for two-way dialogue with a wide range of stakeholders. In the United Kingdom, probabilistic performance assessments of a potential deep geological disposal facility have typically been undertaken by experts to meet regulations set by other experts. However, there is potential for performance assessments to fulfil the additional role of enabling dialogue with other stakeholder groups. This paper suggests developments in the focus and presentation of performance assessments to foster such dialogue. It reflects issues relevant to performance assessment that arise as waste management organisations consider the consequences of involving wider stakeholder groups in decision making about repository development

Engaging the expert in public dialogue: Developing the role of performance assessment

Energy Technology Data Exchange (ETDEWEB)

Littleboy, Anna [United Kingdom Nirex Ltd., Harwell (United Kingdom); Hodgkinson, David [Quintessa Ltd., Henley-on-Thames (United Kingdom)

2001-07-01

Participatory approaches to decision-making call for two-way dialogue with a wide range of stakeholders. In the United Kingdom, probabilistic performance assessments of a potential deep geological disposal facility have typically been undertaken by experts to meet regulations set by other experts. However, there is potential for performance assessments to fulfil the additional role of enabling dialogue with other stakeholder groups. This paper suggests developments in the focus and presentation of performance assessments to foster such dialogue. It reflects issues relevant to performance assessment that arise as waste management organisations consider the consequences of involving wider stakeholder groups in decision making about repository development.

Revised Methods for Characterizing Stream Habitat in the National Water-Quality Assessment Program

Science.gov (United States)

Fitzpatrick, Faith A.; Waite, Ian R.; D'Arconte, Patricia J.; Meador, Michael R.; Maupin, Molly A.; Gurtz, Martin E.

1998-01-01

Stream habitat is characterized in the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program as part of an integrated physical, chemical, and biological assessment of the Nation's water quality. The goal of stream habitat characterization is to relate habitat to other physical, chemical, and biological factors that describe water-quality conditions. To accomplish this goal, environmental settings are described at sites selected for water-quality assessment. In addition, spatial and temporal patterns in habitat are examined at local, regional, and national scales. This habitat protocol contains updated methods for evaluating habitat in NAWQA Study Units. Revisions are based on lessons learned after 6 years of applying the original NAWQA habitat protocol to NAWQA Study Unit ecological surveys. Similar to the original protocol, these revised methods for evaluating stream habitat are based on a spatially hierarchical framework that incorporates habitat data at basin, segment, reach, and microhabitat scales. This framework provides a basis for national consistency in collection techniques while allowing flexibility in habitat assessment within individual Study Units. Procedures are described for collecting habitat data at basin and segment scales; these procedures include use of geographic information system data bases, topographic maps, and aerial photographs. Data collected at the reach scale include channel, bank, and riparian characteristics.

TSPA 1991: An initial total-system performance assessment for Yucca Mountain; Yucca Mountain Site Characterization Project

Energy Technology Data Exchange (ETDEWEB)

Barnard, R.W.; Wilson, M.L.; Dockery, H.A.; Kaplan, P.G.; Eaton, R.R.; Bingham, F.W. [Sandia National Labs., Albuquerque, NM (United States); Gauthier, J.H.; Robey, T.H. [Spectra Research Inst., Albuquerque, NM (United States)

1992-07-01

This report describes an assessment of the long-term performance of a repository system that contains deeply buried highly radioactive waste; the system is assumed to be located at the potential site at Yucca Mountain, Nevada. The study includes an identification of features, events, and processes that might affect the potential repository, a construction of scenarios based on this identification, a selection of models describing these scenarios (including abstraction of appropriate models from detailed models), a selection of probability distributions for the parameters in the models, a stochastic calculation of radionuclide releases for the scenarios, and a derivation of complementary cumulative distribution functions (CCDFs) for the releases. Releases and CCDFs are calculated for four categories of scenarios: aqueous flow (modeling primarily the existing conditions at the site, with allowances for climate change), gaseous flow, basaltic igneous activity, and human intrusion. The study shows that models of complex processes can be abstracted into more simplified representations that preserve the understanding of the processes and produce results consistent with those of more complex models.

Assessing Performance and Learning in Interprofessional Health Care Teams.

Science.gov (United States)

Ekmekci, Ozgur; Sheingold, Brenda; Plack, Margaret; LeLacheur, Susan; Halvaksz, Jennifer; Lewis, Karen; Schlumpf, Karen; Greenberg, Larrie

2015-01-01

Teamwork has become an integral part of health care delivery. Such emphasis on teamwork has generated the need to systematically measure and improve the learning and performance of health care teams. The purpose of this study was to develop a comprehensive assessment instrument, the Interprofessional Education and Practice Inventory (IPEPI), to evaluate learning and performance in interprofessional health care teams. The 12-month study commenced in three 4-month phases: (1) a panel of 25 national and international experts participated in the Delphi process to identify factors influencing team learning and team performance; (2) the research team analyzed the findings from the two Delphi rounds to develop the IPEPI; and (3) a cohort of 27 students at the university engaged in clinical simulations to test and refine the IPEPI. Findings suggest key factors that significantly influence team learning and performance include whether the group is able to foster a climate of mutual respect, adopt effective communication strategies, develop a sense of trust, and invite contributions from others. Additionally, in assessing organizational factors, participants indicated those factors that significantly influence team learning and performance include whether the organization is patient-centered, creates a culture of safety (not blame), and supports individual and team learning. These findings highlight the critical role assessment plays in enhancing not just interprofessional education or interprofessional practice, but in essence advancing interprofessional education and practice--which requires an integrated examination of how health care professionals learn and perform in teams.

Drawing students' attention to relevant assessment criteria: effects on self-assessment skills and performance

NARCIS (Netherlands)

Fastré, Greet; Van der Klink, Marcel; Sluijsmans, Dominique; Van Merriënboer, Jeroen

2012-01-01

Fastré, G. M. J., Van der Klink, M. R., Sluijsmans, D., & Van Merriënboer, J. J. G. (2012). Drawing students’ attention to relevant assessment criteria: effects on self-assessment skills and performance. Journal of Vocational Education & Training, 64(2), 185-198. doi:10.1080/13636820.2011.630537

DEVELOPMENT OF PERFORMANCE ASSESSMENT INSTRUMENT FOR NURSES BASED ON WEB IN INPATIENT UNIT

Directory of Open Access Journals (Sweden)

Aprilia Nuryanti

2017-06-01

Full Text Available Introduction: Performance assessment instrument will be problematic when it is not representative in describing the competency because it is not obvious indicators and inappropriate performance standard to nursing’s task. The purpose of this study is to develop nurses’ performance assessment instrument based on the web from multi sources assessment inpatient unit at SMC Hospital. Methods: This study had two phases. The first phase was an explanatory overview of the performance assessment system using questionnaires completed by 53 respondents of nurses, selected by purposive sampling. Instrument development based on FGD with six decision makers in the hospital. Validity was tested by Pearson Product Moment Correlation and reliability of instrument’s was tested by alpha Cronbach. The second phase was socialization and instrument test to observe the quality of instrument using a questionnaire by 47 respondents and recommendations made by 8 participants of FGD. The samples were selected by purposive sampling technique. Performance assessment system was moderate at 58.49%. All questions which aimed to measure the performance of nurses were valid and reliable. The quality of nurses’ performance assessment instruments based on the web was a good category, which was functionality: 81.60; reliability: 78.16; efficiency: 80.85; usability: 81.70 and portability: 81.70. Results: The result was a web-based assessment format, scoring with Likert scale, resource assessment by the direct supervisor which was a multisource evaluator, the development of performance graph, and confidentiality of data on the database server. Discussion: Recommendations for hospital is to make policy based on the final value of the performance assessment by the supervisor which was multisource feedback and it needs a global writing on a form of performance assessment result.

Pretest characterization of WIPP experimental waste

International Nuclear Information System (INIS)

Johnson, J.; Davis, H.

1991-01-01

The Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico, is an underground repository designed for the storage and disposal of transuranic (TRU) wastes from US Department of Energy (DOE) facilities across the country. The Performance Assessment (PA) studies for WIPP address compliance of the repository with applicable regulations, and include full-scale experiments to be performed at the WIPP site. These experiments are the bin-scale and alcove tests to be conducted by Sandia National Laboratories (SNL). Prior to conducting these experiments, the waste to be used in these tests needs to be characterized to provide data on the initial conditions for these experiments. This characterization is referred to as the Pretest Characterization of WIPP Experimental Waste, and is also expected to provide input to other programmatic efforts related to waste characterization. The purpose of this paper is to describe the pretest waste characterization activities currently in progress for the WIPP bin-scale waste, and to discuss the program plan and specific analytical protocols being developed for this characterization. The relationship between different programs and documents related to waste characterization efforts is also highlighted in this paper

Comparative values of medical school assessments in the prediction of internship performance.

Science.gov (United States)

Lee, Ming; Vermillion, Michelle

2018-02-01

Multiple undergraduate achievements have been used for graduate admission consideration. Their relative values in the prediction of residency performance are not clear. This study compared the contributions of major undergraduate assessments to the prediction of internship performance. Internship performance ratings of the graduates of a medical school were collected from 2012 to 2015. Hierarchical multiple regression analyses were used to examine the predictive values of undergraduate measures assessing basic and clinical sciences knowledge and clinical performances, after controlling for differences in the Medical College Admission Test (MCAT). Four hundred eighty (75%) graduates' archived data were used in the study. Analyses revealed that clinical competencies, assessed by the USMLE Step 2 CK, NBME medicine exam, and an eight-station objective structured clinical examination (OSCE), were strong predictors of internship performance. Neither the USMLE Step 1 nor the inpatient internal medicine clerkship evaluation predicted internship performance. The undergraduate assessments as a whole showed a significant collective relationship with internship performance (ΔR 2  = 0.12, p < 0.001). The study supports the use of clinical competency assessments, instead of pre-clinical measures, in graduate admission consideration. It also provides validity evidence for OSCE scores in the prediction of workplace performance.

The development and status of performance assessment in radioactive waste disposal

International Nuclear Information System (INIS)

McCombie, C.; Papp, T.; Coplan, S.

1990-01-01

The development of formal performance assessment in radioactive waste disposal has been in progress for around 10-15 years now. The time is particularly opportune for a review of the state-of-the-art because of current changes in the status of repository planning and implementation world-wide. Several major feasibility-type studies have been completed, the first full site-specific safety analyses are being performed for engineered underground disposal facilities for L/ILW, and - for HLW - the die are now being cast by implementers and regulators determining how the safety analyses for licensing are to be performed and assessed. This introductory paper reviews the development of performance assessment, including a reiteration of the aims and a recapitulation of the technical progress and achievements to date. The most important purpose, however, is to identify some key issues occupying safety analysts and regulatory reviewers involved in waste disposal today. The objective is to present the generally accepted consensus on the state of the art in performance assessment. 40 refs., 2 figs

Performance of GPS-devices for environmental exposure assessment.

Science.gov (United States)

Beekhuizen, Johan; Kromhout, Hans; Huss, Anke; Vermeulen, Roel

2013-01-01

Integration of individual time-location patterns with spatially resolved exposure maps enables a more accurate estimation of personal exposures to environmental pollutants than using estimates at fixed locations. Current global positioning system (GPS) devices can be used to track an individual's location. However, information on GPS-performance in environmental exposure assessment is largely missing. We therefore performed two studies. First, a commute-study, where the commute of 12 individuals was tracked twice, testing GPS-performance for five transport modes and two wearing modes. Second, an urban-tracking study, where one individual was tracked repeatedly through different areas, focused on the effect of building obstruction on GPS-performance. The median error from the true path for walking was 3.7 m, biking 2.9 m, train 4.8 m, bus 4.9 m, and car 3.3 m. Errors were larger in a high-rise commercial area (median error=7.1 m) compared with a low-rise residential area (median error=2.2 m). Thus, GPS-performance largely depends on the transport mode and urban built-up. Although ~85% of all errors were 50 m. Modern GPS-devices are useful tools for environmental exposure assessment, but large GPS-errors might affect estimates of exposures with high spatial variability.

Total System Performance Assessment: Enhanced Design Alternative V

International Nuclear Information System (INIS)

N. Erb; S. Miller; V. Vallikat

1999-01-01

This calculation documents the total system performance assessment modeling of Enhanced Design Analysis (EDA) V. EDA V is based on the TSPA-VA base design which has been modified with higher thermal loading, a quartz sand invert, and line loading with 21 PWR waste packages that have 2-cm thick titanium grade 7 corrosion resistance material (CRM) drip shields placed over dual-layer waste packages composed of 'inside out' VA reference material (CRWMS M and O 1999a). This document details the changes and assumptions made to the VA reference Performance Assessment Model (CRWMS M and O 1998a) to incorporate the design changes detailed for EDA V. The performance measure for this evaluation is expected value dose-rate history. Time histories of dose rate are presented for EDA V and a Defense in Depth (DID) analysis base on EDA V. Additional details concerning the Enhanced Design Alternative II are provided in the 'LADS 3-12 Requests' interoffice correspondence (CRWMS M and O 1999a)

Performance assessment experience at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Lee, D.W.

1994-01-01

The development of a performance assessment (PA) for low-level radioactive waste disposal operations at Oak Ridge National Laboratory (ORNL) was initiated in 1989 and is continuing. A draft PA was prepared in September 1990 and submitted to the DOE Peer Review Panel for review and comment. Recommendations were received that formed the basis for a revised PA that was completed in December 1993. The review of the revised PA is continuing. This paper reviews the experience gained in the preparation of the PA including the technical difficulties associated with performance assessment in Oak Ridge and an overview of the methods used in the PA. Changes in waste operations that resulted from the findings in the PA include improved waste acceptance criteria, waste certification, and waste management practices. The discussion includes issues that relate to the application of current performance objectives to older disposal facilities, which are being addressed as part of the CERCLA process

Performance evaluations of continuous glucose monitoring systems: precision absolute relative deviation is part of the assessment.

Science.gov (United States)

Obermaier, Karin; Schmelzeisen-Redeker, Günther; Schoemaker, Michael; Klötzer, Hans-Martin; Kirchsteiger, Harald; Eikmeier, Heino; del Re, Luigi

2013-07-01

Even though a Clinical and Laboratory Standards Institute proposal exists on the design of studies and performance criteria for continuous glucose monitoring (CGM) systems, it has not yet led to a consistent evaluation of different systems, as no consensus has been reached on the reference method to evaluate them or on acceptance levels. As a consequence, performance assessment of CGM systems tends to be inconclusive, and a comparison of the outcome of different studies is difficult. Published information and available data (as presented in this issue of Journal of Diabetes Science and Technology by Freckmann and coauthors) are used to assess the suitability of several frequently used methods [International Organization for Standardization, continuous glucose error grid analysis, mean absolute relative deviation (MARD), precision absolute relative deviation (PARD)] when assessing performance of CGM systems in terms of accuracy and precision. The combined use of MARD and PARD seems to allow for better characterization of sensor performance. The use of different quantities for calibration and evaluation, e.g., capillary blood using a blood glucose (BG) meter versus venous blood using a laboratory measurement, introduces an additional error source. Using BG values measured in more or less large intervals as the only reference leads to a significant loss of information in comparison with the continuous sensor signal and possibly to an erroneous estimation of sensor performance during swings. Both can be improved using data from two identical CGM sensors worn by the same patient in parallel. Evaluation of CGM performance studies should follow an identical study design, including sufficient swings in glycemia. At least a part of the study participants should wear two identical CGM sensors in parallel. All data available should be used for evaluation, both by MARD and PARD, a good PARD value being a precondition to trust a good MARD value. Results should be analyzed and

Assessing the Performance of Business Unit Managers

NARCIS (Netherlands)

Bouwens, J.F.M.G.; van Lent, L.A.G.M.

2006-01-01

Using a sample of 140 managers, we investigate the use of various performance metrics in determining the periodic assessment, bonus decisions, and career paths of business unit managers.We show that the weight on accounting return measures is associated with the authority of these managers, and we

An importance-performance assessment of delegates' satisfaction ...

African Journals Online (AJOL)

An importance-performance assessment of delegates' satisfaction with the catering component of courses offered by continuing education at the University of ... of its catering component, a company would be able to make appropriate and necessary managerial decisions in order to retain and expand its customer base.

Assessment of uncertainties associated with characterization of geological environment in the Tono area. Japanese fiscal year, 2006 (Contract research)

International Nuclear Information System (INIS)

Toida, Masaru; Suyama, Yasuhiro; Seno, Shoji; Atsumi, Hiroyuki; Ogata, Nobuhisa

2008-03-01

'Geoscientific research' performed at the Tono Geoscience Center is developing site investigation, characterization and assessment techniques for understanding of geological environment. Their important themes are to establish a methodology for analyzing uncertainties in heterogeneous geological environment, and to develop investigation techniques for reducing the uncertainties efficiently. This study proposes a new approach where all the possible options in the models and data-sets that cannot be excluded in the light of the evidence available, are identified. This approach enables uncertainties associated with the understanding at a given stage of the site characterization to be made explicitly using an uncertainty analysis technique based on Fuzzy geostatistics. This, in turn, supports the design of the following investigation stage to reduce the uncertainties efficiently. In the study, current knowledge had been compiled, and the technique had been advanced through geological modeling and groundwater analyses in the Tono area. This report systematized the uncertainty analysis methodology associated with the characterization of the geological environment, and organized the procedure of the methodology with the application examples in the study. This report also dealt with investigation techniques for reducing the uncertainties efficiently, and underground facility design options for handling geological uncertainties based on the characterization of the geological environment. (author)

Exploring REACH as a potential data source for characterizing ecotoxicity in life cycle assessment

DEFF Research Database (Denmark)

Müller, Nienke; de Zwart, Dick; Hauschild, Michael Zwicky

2017-01-01

Toxicity models in life cycle impact assessment (LCIA) currently only characterize a small fraction of marketed substances, mostly because of limitations in the underlying ecotoxicity data. One approach to improve the current data situation in LCIA is to identify new data sources, such as the Eur......Toxicity models in life cycle impact assessment (LCIA) currently only characterize a small fraction of marketed substances, mostly because of limitations in the underlying ecotoxicity data. One approach to improve the current data situation in LCIA is to identify new data sources......, such as the European Registration, Evaluation, Authorisation, and Restriction of Chemicals (REACH) database. The present study explored REACH as a potential data source for LCIA based on matching reported ecotoxicity data for substances that are currently also included in the United Nations Environment Programme....../Society for Environmental Toxicology and Chemistry (UNEP/SETAC) scientific consensus model USEtox for characterizing toxicity impacts. Data are evaluated with respect to number of data points, reported reliability, and test duration, and are compared with data listed in USEtox at the level of hazardous concentration for 50...

The application of GIS and remote sensing technologies for site characterization and environmental assessment

International Nuclear Information System (INIS)

Durfee, R.C.; McCord, R.A.; Dobson, J.E.

1993-01-01

Environmental cleanup and restoration of hazardous waste sites are major activities at federal facilities around the US. Geographic information systems (GIS) and remote sensing technologies are very useful computer tools to aid in site characterization, monitoring, assessment, and remediation efforts. Results from applying three technologies are presented to demonstrate examples of site characterization and environmental assessment for a federal facility. The first technology involves the development and use of GIS within the comprehensive Oak Ridge Environmental Information System (OREIS) to integrate facility data, terrain models, aerial and satellite imagery, demographics, waste area information, and geographic data bases. The second technology presents 3-D subsurface analyses and displays of groundwater and contaminant measurements within waste areas. In the third application, aerial survey information is being used to characterize land cover and vegetative patterns, detect change, and study areas of previous waste activities and possible transport pathways. These computer technologies are required to manage, analyze, and display the large amounts of environmental and geographic data that must be handled in carrying out effective environmental restoration

Guidelines for radiological performance assessment of DOE low-level radioactive waste disposal sites

International Nuclear Information System (INIS)

Case, M.J.; Otis, M.D.

1988-07-01

This document provides guidance for conducting radiological performance assessments of Department of Energy (DOE) low-level radioactive waste (LLW) disposal facilities. The guidance is specifically intended to provide the fundamental approach necessary to meet the performance assessment requirements. The document is written for LLW facility operators or other personnel who will manage the performance assessment task. The document is meant to provide guidance for conducting performance assessments in a generally consistent manner at all DOE LLW disposal facilities. The guidance includes a summary of performance objectives to be met by LLW disposal facilities (these objectives are derived from current DOE and other applicable federal regulatory guidelines); specific criteria for an adequate performance assessment and from which a minimum set of required calculations may be determined; recommendations of methods for screening critical components of the analysis system so that these components can be addressed in detail; recommendations for the selection of existing models and the development of site-specific models; recommendations of techniques for comparison of assessment results with performance objectives; and a summary of reporting requirements

Effect of Engaging Trainees by Assessing Peer Performance

DEFF Research Database (Denmark)

Loumann Krogh, Charlotte; Ringsted, Charlotte; Kromann, Charles B

2014-01-01

during training. Outcome measures were in-training performance and performance, both of which were measured two weeks after the course. Trainees' performances were videotaped and assessed by two expert raters using a checklist that included a global rating. Trainees' satisfaction with the training...... was also evaluated. RESULTS: The intervention group obtained a significantly higher overall in-training performance score than the control group: mean checklist score 20.87 (SD 2.51) versus 19.14 (SD 2.65) P = 0.003 and mean global rating 3.25 SD (0.99) versus 2.95 (SD 1.09) P = 0.014. Postcourse...

Initial performance assessment of the disposal of spent nuclear fuel and high-level waste stored at Idaho National Engineering Laboratory. Volume 1, Methodology and results

Energy Technology Data Exchange (ETDEWEB)

Rechard, R.P. [ed.

1993-12-01

This performance assessment characterized plausible treatment options conceived by the Idaho National Engineering Laboratory (INEL) for its spent fuel and high-level radioactive waste and then modeled the performance of the resulting waste forms in two hypothetical, deep, geologic repositories: one in bedded salt and the other in granite. The results of the performance assessment are intended to help guide INEL in its study of how to prepare wastes and spent fuel for eventual permanent disposal. This assessment was part of the Waste Management Technology Development Program designed to help the US Department of Energy develop and demonstrate the capability to dispose of its nuclear waste. Although numerous caveats must be placed on the results, the general findings were as follows: Though the waste form behavior depended upon the repository type, all current and proposed waste forms provided acceptable behavior in the salt and granite repositories.

Development of performance assessment instrument based contextual learning for measuring students laboratory skills

Science.gov (United States)

Susilaningsih, E.; Khotimah, K.; Nurhayati, S.

2018-04-01

The assessment of laboratory skill in general hasn’t specific guideline in assessment, while the individual assessment of students during a performance and skill in performing laboratory is still not been observed and measured properly. Alternative assessment that can be used to measure student laboratory skill is use performance assessment. The purpose of this study was to determine whether the performance assessment instrument that the result of research can be used to assess basic skills student laboratory. This research was conducted by the Research and Development. The result of the data analysis performance assessment instruments developed feasible to implement and validation result 62.5 with very good categories for observation sheets laboratory skills and all of the components with the very good category. The procedure is the preliminary stages of research and development stages. Preliminary stages are divided in two, namely the field studies and literature studies. The development stages are divided into several parts, namely 1) development of the type instrument, 2) validation by an expert, 3) a limited scale trial, 4) large-scale trials and 5) implementation of the product. The instrument included in the category of effective because 26 from 29 students have very high laboratory skill and high laboratory skill. The research of performance assessment instrument is standard and can be used to assess basic skill student laboratory.

The assessment and treatment of performance anxiety in musicians.

Science.gov (United States)

Clark, D B; Agras, W S

1991-05-01

Performance anxiety in musicians may be severe enough to require intervention but has been the subject of relatively little clinical research. The authors' objectives were to describe the results of a comprehensive clinical and laboratory assessment and to perform a double-blind, placebo-controlled study comparing buspirone, cognitive-behavior therapy, and the combination of these treatments for performance anxiety. Ninety-four subjects were recruited by mass media announcements and were seen in a university-based outpatient psychiatric clinic. Assessments were 1) questionnaires for all 94 subjects, 2) diagnostic interview of 50 subjects, and 3) laboratory performance of 34 subjects. Treatment conditions were 1) 6 weeks of buspirone, 2) 6 weeks of placebo, 3) a five-session, group cognitive-behavior therapy program with buspirone, or 4) the cognitive-behavior therapy program with placebo. Treatment outcome measures included subjective anxiety ratings and heart rate measures during a laboratory performance, a questionnaire measure of performance confidence, and a blind rating of musical performance quality. All subjects fulfilled criteria for DSM-III-R social phobia. Of the 15 full-time professional musicians, ten had tried propranolol and three had stopped performing. Most of the subjects had substantial anxiety and heart rate increases during laboratory speech and musical performances. Cognitive-behavior therapy resulted in statistically significant reductions in subjective anxiety, improved quality of musical performance, and improved performance confidence. Buspirone was not an effective treatment. Cognitive-behavior therapy is a viable treatment approach for performance anxiety in musicians.

Performance Demonstration Program Plan for Nondestructive Assay of Boxed Wastes for the TRU Waste Characterization Program

International Nuclear Information System (INIS)

2001-01-01

The Performance Demonstration Program (PDP) for nondestructive assay (NDA) consists of a series of tests to evaluate the capability for NDA of transuranic (TRU) waste throughout the Department of Energy (DOE) complex. Each test is termed a PDP cycle. These evaluation cycles provide an objective measure of the reliability of measurements obtained from NDA systems used to characterize the radiological constituents of TRU waste. The primary documents governing the conduct of the PDP are the Waste Acceptance Criteria for the Waste Isolation Pilot Plant (WAC; DOE 1999a) and the Quality Assurance Program Document (QAPD; DOE 1999b). The WAC requires participation in the PDP; the PDP must comply with the QAPD and the WAC. The WAC contains technical and quality requirements for acceptable NDA. This plan implements the general requirements of the QAPD and applicable requirements of the WAC for the NDA PDP for boxed waste assay systems. Measurement facilities demonstrate acceptable performance by the successful testing of simulated waste containers according to the criteria set by this PDP Plan. Comparison among DOE measurement groups and commercial assay services is achieved by comparing the results of measurements on similar simulated waste containers reported by the different measurement facilities. These tests are used as an independent means to assess the performance of measurement groups regarding compliance with established quality assurance objectives (QAO's). Measurement facilities must analyze the simulated waste containers using the same procedures used for normal waste characterization activities. For the boxed waste PDP, a simulated waste container consists of a modified standard waste box (SWB) emplaced with radioactive standards and fabricated matrix inserts. An SWB is a waste box with ends designed specifically to fit the TRUPACT-II shipping container. SWB's will be used to package a substantial volume of the TRU waste for disposal. These PDP sample components

Performance characterization of the TRW 35K pulse tube cooler

International Nuclear Information System (INIS)

Collins, S.A.; Johnson, D.L.; Smedley, G.T.; Ross, R.G. Jr.

1996-01-01

The TRW 35K pulse tube cooler is configured as an integral cooler, with the pulse tube attached perpendicular to a pair of compressors operating into a common compression chamber. The cooler was optimized for 35K operation and has a nominal cooling capacity of 850 mW at 35 K with a cooler input power of 200 W. It also provides 2 W of cooling at 60 K for 90 W of input power. The cooler was extensively characterized by JPL, measuring the thermal performance and the cooler-generated vibration and EMI as a function of piston stroke and offset position. The thermal performance was found to be quite sensitive to the piston offset position. The pulse tube parasitic conduction levels were also measured and shown to have a strong angular dependence relative to gravity. Magnetic shielding studies were performed to examine radiated magnetic emission levels from compressors with and without shielding

Assessment of Residents Readiness to Perform Lumbar Puncture

DEFF Research Database (Denmark)

Henriksen, Mikael Johannes Vuokko; Wienecke, Troels; Thagesen, Helle

2017-01-01

and 18 novices performing the procedure in a simulated, ward-like setting with a standardized patient. Procedural performance was assessed by three content experts. We used generalizability theory to explore reliability. The discriminative ability of the tool was explored by comparing performance scores......Background: Lumbar puncture is a common procedure in many specialties. The procedure serves to diagnose life-threatening conditions, often requiring rapid performance. However, junior doctors possess uncertainties regarding performing the procedure and frequently perform below expectations. Hence...... between the two groups. The contrasting groups method was used to set a pass/fail standard and the consequences of this was explored. Key results: The interviews identified that in addition to the technical aspects of the procedure, non-technical elements involving planning and conducting the procedure...

Panel discussion on near-field coupled processes with emphasis on performance assessment

International Nuclear Information System (INIS)

Codell, R.B.; Baca, R.G.; Ahola, M.P.

1996-01-01

The presentations in this panel discussion involve the general topic of near-field coupled processes and postclosure performance assessment with an emphasis on rock mechanics. The potential impact of near-field rock mass deformation on repository performance was discussed, as well as topics including long term excavation deterioration, the performance of geologic seals, and coupled processes concerning rock mechanics in performance assessments

Protocol for VOC-Arid ID remediation performance characterization

International Nuclear Information System (INIS)

Tegner, B.J.; Hassig, N.L.; Last, G.V.

1994-09-01

The Volatile Organic Compound-Arid Integrated Demonstration (VOC-Arid ID) is a technology development program sponsored by the US Department of Energy's Office of Technology Development that is targeted to acquire, develop, demonstrate, and deploy new technologies for the remediation of VOC contaminants in the soils and groundwaters of arid DOE sites. Technologies cannot be adequately evaluated unless sufficient site characterization and technology performance data have been collection and analyzed. The responsibility for identifying these data needs has been placed largely on the Principal Investigators (PIs) developing the remediation technology, who usually are not experts in site characterization or in identification of appropriate sampling, analysis, and monitoring techniques to support the field testing. This document provides a protocol for planning the collection of data before, during, and after a test of a new technology. This generic protocol provides the PIs and project managers with a set of steps to follow. The protocol is based on a data collection planning process called the Data Quality Objectives (DQO) process, which was originally developed by the US Environmental Protection Agency and has been expanded by DOE to support site cleanup decisions. The DQO process focuses on the quality and quantity of data required to make decision. Stakeholders to the decisions must negotiate such key inputs to the process as the decision rules that will be used and the acceptable probabilities of making decision errors

Proposed methodology for completion of scenario analysis for the Basalt Waste Isolation Project. [Assessment of post-closure performance for a proposed repository for high-level nuclear waste

Energy Technology Data Exchange (ETDEWEB)

Roberds, W.J.; Plum, R.J.; Visca, P.J.

1984-11-01

This report presents the methodology to complete an assessment of postclosure performance, considering all credible scenarios, including the nominal case, for a proposed repository for high-level nuclear waste at the Hanford Site, Washington State. The methodology consists of defensible techniques for identifying and screening scenarios, and for then assessing the risks associated with each. The results of the scenario analysis are used to comprehensively determine system performance and/or risk for evaluation of compliance with postclosure performance criteria (10 CFR 60 and 40 CFR 191). In addition to describing the proposed methodology, this report reviews available methodologies for scenario analysis, discusses pertinent performance assessment and uncertainty concepts, advises how to implement the methodology (including the organizational requirements and a description of tasks) and recommends how to use the methodology in guiding future site characterization, analysis, and engineered subsystem design work. 36 refs., 24 figs., 1 tab.

Mastoidectomy performance assessment of virtual simulation training using final-product analysis

DEFF Research Database (Denmark)

Andersen, Steven A W; Cayé-Thomasen, Per; Sørensen, Mads S

2015-01-01

a modified Welling scale. The simulator gathered basic metrics on time, steps, and volumes in relation to the on-screen tutorial and collisions with vital structures. RESULTS: Substantial inter-rater reliability (kappa = 0.77) for virtual simulation and moderate inter-rater reliability (kappa = 0.......59) for dissection final-product assessment was found. The simulation and dissection performance scores had significant correlation (P = .014). None of the basic simulator metrics correlated significantly with the final-product score except for number of steps completed in the simulator. CONCLUSIONS: A modified...... version of a validated final-product performance assessment tool can be used to assess mastoidectomy on virtual temporal bones. Performance assessment of virtual mastoidectomy could potentially save the use of cadaveric temporal bones for more advanced training when a basic level of competency...

Preliminary performance assessment for the Waste Isolation Pilot Plant, December 1992

International Nuclear Information System (INIS)

1992-01-01

This volume documents model parameters chosen as of July 1992 that were used by the Performance Assessment Department of Sandia National Laboratories in its 1992 preliminary performance assessment of the Waste Isolation Pilot Plant (WIPP). Ranges and distributions for about 300 modeling parameters in the current secondary data base are presented in tables for the geologic and engineered barriers, global materials (e.g., fluid properties), and agents that act upon the WIPP disposal system such as climate variability and human-intrusion boreholes. The 49 parameters sampled in the 1992 Preliminary Performance Assessment are given special emphasis with tables and graphics that provide insight and sources of data for each parameter

The Visible Hand of Research Performance Assessment

Science.gov (United States)

Hamann, Julian

2016-01-01

Far from allowing a governance of universities by the invisible hand of market forces, research performance assessments do not just measure differences in research quality, but yield themselves visible symptoms in terms of a stratification and standardization of disciplines. The article illustrates this with a case study of UK history departments…

Threshold Assessment and Performance Management: Modernizing or Masculinizing Teaching in England?

Science.gov (United States)

Mahony, Pat; Hextall, Ian; Menter, Ian

2004-01-01

The paper reports on aspects of an ESRC project, "The impact of Performance 'Threshold Assessment' on teachers' work" (ESRC R000239286). The paper begins by explaining the nature and technology of "Threshold Assessment," and its location nationally within the performance management system recently introduced into schools in England. We review the…

Geometrical characterization and performance optimization of monopropellant thruster injector

Directory of Open Access Journals (Sweden)

T.R. Nada

2012-12-01

Full Text Available The function of the injector in a monopropellant thruster is to atomize the liquid hydrazine and to distribute it over the catalyst bed as uniformly as possible. A second objective is to place the maximum amount of catalyst in contact with the propellant in as short time as possible to minimize the starting transient time. Coverage by the spray is controlled mainly by cone angle and diameter of the catalyst bed, while atomization quality is measured by the Sauter Mean Diameter, SMD. These parameters are evaluated using empirical formulae. In this paper, two main types of injectors are investigated; plain orifice and full cone pressure swirl injectors. The performance of these two types is examined for use with blow down monopropellant propulsion system. A comprehensive characterization is given and design charts are introduced to facilitate optimizing the performance of the injector. Full-cone injector is a more suitable choice for monopropellant thruster and it might be available commercially.

Performance Assessment and Geometric Calibration of RESOURCESAT-2

Science.gov (United States)

Radhadevi, P. V.; Solanki, S. S.; Akilan, A.; Jyothi, M. V.; Nagasubramanian, V.

2016-06-01

Resourcesat-2 (RS-2) has successfully completed five years of operations in its orbit. This satellite has multi-resolution and multi-spectral capabilities in a single platform. A continuous and autonomous co-registration, geo-location and radiometric calibration of image data from different sensors with widely varying view angles and resolution was one of the challenges of RS-2 data processing. On-orbit geometric performance of RS-2 sensors has been widely assessed and calibrated during the initial phase operations. Since then, as an ongoing activity, various geometric performance data are being generated periodically. This is performed with sites of dense ground control points (GCPs). These parameters are correlated to the direct geo-location accuracy of the RS-2 sensors and are monitored and validated to maintain the performance. This paper brings out the geometric accuracy assessment, calibration and validation done for about 500 datasets of RS-2. The objectives of this study are to ensure the best absolute and relative location accuracy of different cameras, location performance with payload steering and co-registration of multiple bands. This is done using a viewing geometry model, given ephemeris and attitude data, precise camera geometry and datum transformation. In the model, the forward and reverse transformations between the coordinate systems associated with the focal plane, payload, body, orbit and ground are rigorously and explicitly defined. System level tests using comparisons to ground check points have validated the operational geo-location accuracy performance and the stability of the calibration parameters.

Data on Student Performance Under Different Forms of Assessment

Science.gov (United States)

King, Russell

1976-01-01

Recognition of various abilities and skills in university degree work, and the development of an appropriate range of assessment modes to test these abilities, presupposes that students will perform differently under the various forms of assessment. The limited data available to test this supposition are reviewed and analysis of one geography…

Circadian rhythms in cognitive performance: implications for neuropsychological assessment

Directory of Open Access Journals (Sweden)

Valdez P

2012-12-01

Full Text Available Pablo Valdez, Candelaria Ramírez, Aída GarcíaLaboratory of Psychophysiology, School of Psychology, University of Nuevo León, Monterrey, Nuevo León, MéxicoAbstract: Circadian variations have been found in human performance, including the efficiency to execute many tasks, such as sensory, motor, reaction time, time estimation, memory, verbal, arithmetic calculations, and simulated driving tasks. Performance increases during the day and decreases during the night. Circadian rhythms have been found in three basic neuropsychological processes (attention, working memory, and executive functions, which may explain oscillations in the performance of many tasks. The time course of circadian rhythms in cognitive performance may be modified significantly in patients with brain disorders, due to chronotype, age, alterations of the circadian rhythm, sleep deprivation, type of disorder, and medication. This review analyzes the recent results on circadian rhythms in cognitive performance, as well as the implications of these rhythms for the neuropsychological assessment of patients with brain disorders such as traumatic head injury, stroke, dementia, developmental disorders, and psychiatric disorders.Keywords: human circadian rhythms, cognitive performance, neuropsychological assessment, attention, working memory, executive functions

Identifying and characterizing transboundary aquifers along the Mexico-US border: An initial assessment

Science.gov (United States)

Sanchez, Rosario; Lopez, Victoria; Eckstein, Gabriel

2016-04-01

The transboundary nature of water dividing Mexico and the United States (U.S.) transforms the entire border region into an instrument of cooperation, a source of conflict, a national security issue, and an environmental concern. Reasonable data collection and research analysis have been conducted for surface waters by joint governmental institutions and non-governmental bodies. However, with the exception of the U.S. Transboundary Assessment Act Program (TAAP) (focusing on the Hueco Bolson, Mesilla Bolson, San Pedro and Santa Cruz aquifers), there is no comparable research, institutional development, or assessment of transboundary groundwater issues on the frontier. Moreover, data collection and methodologies vary between the two countries, there is no broadly accepted definition of the transboundary nature of an aquifer, and available legal and policy frameworks are constrained by non-hydrological considerations. Hence, there is a conceptual and institutional void regarding transboundary groundwater resources between Mexico and the U.S. The purpose of this paper is to bridge this void and characterize transboundary aquifers on the Mexico-US border. It reviews existing international frameworks for identifying hydrological and social criteria that characterize an aquifer as transboundary. It then assesses data from both countries to propose where and which aquifers could be considered transboundary. Finally, the paper proposes an agenda for assessing Mexico-US transboundary aquifers as a means for improving groundwater management in the border region.

The development and status of performance assessment in radioactive waste disposal

International Nuclear Information System (INIS)

McCombie, C.; Papp, T.; Coplan, S.

1990-01-01

The development of formal performance assessment in radioactive waste disposal has been in progress for around 10-15 years now. The time is particularly opportune for a review of the state-of-the-art because of current changes in the status of repository planning and implementation worldwide. Several major feasibility-type studies have been completed, the first full site-specific safety analyses are being performed for engineered underground disposal facilities for L/ILW, and - for HLW - the die are now being cast by implementers and regulatory determining how the safety analyses for licensing are to be performed and assessed. The article reviews the development of performance assessment and attempts to identify some key issues occupying safety analysts and regulatory reviewers involved in waste disposal today. (author) 7 figs

ASSESSING INDIVIDUAL PERFORMANCE ON INFORMATION TECHNOLOGY ADOPTION: A NEW MODEL

OpenAIRE

Diah Hari Suryaningrum

2012-01-01

This paper aims to propose a new model in assessing individual performance on information technology adoption. The new model to assess individual performance was derived from two different theories: decomposed theory of planned behavior and task-technology fit theory. Although many researchers have tried to expand these theories, some of their efforts might lack of theoretical assumptions. To overcome this problem and enhance the coherence of the integration, I used a theory from social scien...

Assessing The Performance of Hydrological Models

Science.gov (United States)

van der Knijff, Johan

The performance of hydrological models is often characterized using the coefficient of efficiency, E. The sensitivity of E to extreme streamflow values, and the difficulty of deciding what value of E should be used as a threshold to identify 'good' models or model parameterizations, have proven to be serious shortcomings of this index. This paper reviews some alternative performance indices that have appeared in the litera- ture. Legates and McCabe (1999) suggested a more generalized form of E, E'(j,B). Here, j is a parameter that controls how much emphasis is put on extreme streamflow values, and B defines a benchmark or 'null hypothesis' against which the results of the model are tested. E'(j,B) was used to evaluate a large number of parameterizations of a conceptual rainfall-runoff model, using 6 different combinations of j and B. First, the effect of j and B is explained. Second, it is demonstrated how the index can be used to explicitly test hypotheses about the model and the data. This approach appears to be particularly attractive if the index is used as a likelihood measure within a GLUE-type analysis.

Performance assessment of cogeneration and trigeneration systems for small scale applications

International Nuclear Information System (INIS)

Angrisani, Giovanni; Akisawa, Atsushi; Marrasso, Elisa; Roselli, Carlo; Sasso, Maurizio

2016-01-01

Highlights: • Indices and methods to assess the performance of polygeneration systems. • Index to evaluate the economic feasibility of trigeneration system is introduced. • Thermo-economic analysis is performed considering three commercial cogenerators. • Sensitivity analysis varying reference electric efficiency for European Countries. • Sensitivity analysis varying environmental and economic parameters. - Abstract: Cogeneration and trigeneration systems can contribute to the reduction of primary energy consumption and greenhouse gas emissions in residential and tertiary sectors, by reducing fossil fuels demand and grid losses with respect to conventional systems. To evaluate the performance of these systems, several indices and assessment methodologies can be used, due to the high complexity of such systems, which can consist of several energy conversion devices and can perform bidirectional interactions with external electric and thermal grids. In this paper, a review of the available indices and methodologies to assess the performances of polygeneration systems is provided. An index (TSS_t_r_i) aimed to assess the economic feasibility of a trigeneration system is also introduced and discussed. This activity started in the framework of the International Energy Agency Annex 54 project (“Integration of Micro-Generation and Related Energy Technologies in Buildings”), where research groups shared their expertise about methods applied in each Country to evaluate the performance of polygeneration systems. It was concluded that a thermo-economic analysis comparing the performance of a polygeneration system with those of a reference benchmark scenario, is a very suitable assessment method. Some of the reviewed methodologies are then applied to small scale commercial cogenerators. The sensitivity analysis is performed considering different reference average values of electric efficiency, unitary natural gas and electricity prices, and emission factors for

Second ILAW Site Borehole Characterization Plan

International Nuclear Information System (INIS)

Reidel, S.P.

2000-01-01

The US Department of Energy's Hanford Site has the most diverse and largest amounts of radioactive tank waste in the US. High-level radioactive waste has been stored at Hanford since 1944. Approximately 209,000 m 3 (54 Mgal) of waste are currently stored in 177 tanks. Vitrification and onsite disposal of low-activity tank waste (LAW) are embodied in the strategy described in the Tri-Party Agreement. The tank waste is to be retrieved, separated into low- and high-level fractions, and then immobilized. The low-activity vitrified waste will be disposed of in the 200 East Area of the Hanford Site. This report is a plan to drill and characterize the second borehole for the Performance Assessment. The first characterization borehole was drilled in 1998. The plan describes data collection activities for determining physical and chemical properties of the vadose zone and saturated zone on the northeast side of the proposed disposal site. These data will then be used in the 2005 Performance Assessment

Integrating Performance Assessments across a PK-20 Continuum: A Locally Developed Collaboration

Science.gov (United States)

McCurdy, Kathryn; Reagan, Emilie Mitescu; Rogers, Audrey; Schram, Thomas

2018-01-01

A response to Stosich et al.'s (2018) article reviewing ways in which states have taken up performance assessments, this commentary seeks to extend the focus and use of performance assessments to preservice teacher education. As such, the authors describe statewide initiatives in New Hampshire that are working to integrate performance assessments…

Performance assessment of indigenously developed FBG strain ...

Indian Academy of Sciences (India)

Use of FBG sensors for real time health monitoring of various civil engineering structures is well-established in western world since last decade, whereas in the Indian context this technology is still in a nascent stage. In this paper, performance assessment of indigenously developed FBG sensors for the application of health ...

Performance characterization of night vision equipment based on Triangle Orientation Discrimination (TOD) methodology

NARCIS (Netherlands)

Laurent, N.; Lejard, C.; Deltel, G.; Bijl, P.

2013-01-01

Night vision equipment is crucial in order to accomplish supremacy and safety of the troops on the battlefield. Evidently, system integrators, MODs and end-users need access to reliable quantitative characterization of the expected field performance when using night vision equipment. The Image

Guidance for performing preliminary assessments under CERCLA

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-09-01

EPA headquarters and a national site assessment workgroup produced this guidance for Regional, State, and contractor staff who manage or perform preliminary assessments (PAs). EPA has focused this guidance on the types of sites and site conditions most commonly encountered. The PA approach described in this guidance is generally applicable to a wide variety of sites. However, because of the variability among sites, the amount of information available, and the level of investigative effort required, it is not possible to provide guidance that is equally applicable to all sites. PA investigators should recognize this and be aware that variation from this guidance may be necessary for some sites, particularly for PAs performed at Federal facilities, PAs conducted under EPA`s Environmental Priorities Initiative (EPI), and PAs at sites that have previously been extensively investigated by EPA or others. The purpose of this guidance is to provide instructions for conducting a PA and reporting results. This guidance discusses the information required to evaluate a site and how to obtain it, how to score a site, and reporting requirements. This document also provides guidelines and instruction on PA evaluation, scoring, and the use of standard PA scoresheets. The overall goal of this guidance is to assist PA investigators in conducting high-quality assessments that result in correct site screening or further action recommendations on a nationally consistent basis.

Methods to characterize environmental settings of stream and groundwater sampling sites for National Water-Quality Assessment

Science.gov (United States)

Nakagaki, Naomi; Hitt, Kerie J.; Price, Curtis V.; Falcone, James A.

2012-01-01

Characterization of natural and anthropogenic features that define the environmental settings of sampling sites for streams and groundwater, including drainage basins and groundwater study areas, is an essential component of water-quality and ecological investigations being conducted as part of the U.S. Geological Survey's National Water-Quality Assessment program. Quantitative characterization of environmental settings, combined with physical, chemical, and biological data collected at sampling sites, contributes to understanding the status of, and influences on, water-quality and ecological conditions. To support studies for the National Water-Quality Assessment program, a geographic information system (GIS) was used to develop a standard set of methods to consistently characterize the sites, drainage basins, and groundwater study areas across the nation. This report describes three methods used for characterization-simple overlay, area-weighted areal interpolation, and land-cover-weighted areal interpolation-and their appropriate applications to geographic analyses that have different objectives and data constraints. In addition, this document records the GIS thematic datasets that are used for the Program's national design and data analyses.

Methodologies for assessing long-term performance of high-level radioactive waste packages

International Nuclear Information System (INIS)

Stephens, K.; Boesch, L.; Crane, B.; Johnson, R.; Moler, R.; Smith, S.; Zaremba, L.

1986-01-01

Several methods the Nuclear Regulatory Commission (NRC) can use to independently assess Department of Energy (DOE) waste package performance were identified by The Aerospace Corporation. The report includes an overview of the necessary attributes of performance assessment, followed by discussions of DOE methods, probabilistic methods capable of predicting waste package lifetime and radionuclide releases, process modeling of waste package barriers, sufficiency of the necessary input data, and the applicability of probability density functions. It is recommended that the initial NRC performance assessment (for the basalt conceptual waste package design) should apply modular simulation, using available process models and data, to demonstrate this assessment method

The Concept of Performance Levels in Criterion-Referenced Assessment.

Science.gov (United States)

Hewitson, Mal

The concept of performance levels in criterion-referenced assessment is explored by applying the idea to different types of tests commonly used in schools, mastery tests (including diagnostic tests) and achievement tests. In mastery tests, a threshold performance standard must be established for each criterion. Attainment of this threshold…

Power probability density function control and performance assessment of a nuclear research reactor

International Nuclear Information System (INIS)

Abharian, Amir Esmaeili; Fadaei, Amir Hosein

2014-01-01

Highlights: • In this paper, the performance assessment of static PDF control system is discussed. • The reactor PDF model is set up based on the B-spline functions. • Acquaints of Nu, and Th-h. equations solve concurrently by reformed Hansen’s method. • A principle of performance assessment is put forward for the PDF of the NR control. - Abstract: One of the main issues in controlling a system is to keep track of the conditions of the system function. The performance condition of the system should be inspected continuously, to keep the system in reliable working condition. In this study, the nuclear reactor is considered as a complicated system and a principle of performance assessment is used for analyzing the performance of the power probability density function (PDF) of the nuclear research reactor control. First, the model of the power PDF is set up, then the controller is designed to make the power PDF for tracing the given shape, that make the reactor to be a closed-loop system. The operating data of the closed-loop reactor are used to assess the control performance with the performance assessment criteria. The modeling, controller design and the performance assessment of the power PDF are all applied to the control of Tehran Research Reactor (TRR) power in a nuclear process. In this paper, the performance assessment of the static PDF control system is discussed, the efficacy and efficiency of the proposed method are investigated, and finally its reliability is proven

economic assessment of the performance of private sector ...

African Journals Online (AJOL)

Admin

Economic and Extension, Delta State University, Asaba Campus, Nigeria ... This paper critically attempts to assess the performance of the private sector ... economy would depend to a large extent on the quantity ..... New York, USA: McGraw.

Conceptual, experimental and computational approaches to support performance assessment of hydrology and chemical transport at Yucca Mountain

International Nuclear Information System (INIS)

Narasimhan, T.N. Wang, J.S.Y.

1992-07-01

The authors of this report have been participating in the Sandia National Laboratory's hydrologic performance assessment of the Yucca Mountain, Nevada, since 1983. The scope of this work is restricted to the unsaturated zone at Yucca Mountain and to technical questions about hydrology and chemical transport. The issues defined here are not to be confused with the elaborate hierarchy of issues that forms the framework of the US Department of Energy plans for characterizing the site (DOE, 1989). The overall task of hydrologic performance assessment involves issues related to hydrology, geochemistry, and energy transport in a highly heterogeneous natural geologic system which will be perturbed in a major way by the disposal activity. Therefore, a rational evaluation of the performance assessment issues must be based on an integrated appreciation of the aforesaid interacting processes. Accordingly, a hierarchical approach is taken in this report, proceeding from the statement of the broad features of the site that make it the site for intensive studies and the rationale for disposal strategy, through the statement of the fundamental questions that need to be answered, to the identification of the issues that need resolution. Having identified the questions and issues, the report then outlines the tasks to be undertaken to resolve the issues. The report consists essentially of two parts. The first part deals with the definition of issues summarized above. The second part summarizes the findings of the authors between 1983 and 1989 under the activities of the former Nevada Nuclear Waste Storage Investigations (NNWSI) and the current YMP

Performance Assessment of Intelligence, Surveillance, and Reconnaissance (ISR) Enterprise Workflows

National Research Council Canada - National Science Library

Hurley, M. B; Jones, P. B

2007-01-01

... on how to assess the performance of these systems. The framework delineates how measurements from laboratory tests, operational experiments, and field deployments can be analyzed to produce accurate, quantitative descriptions of system performance...

Guidance on the Technology Performance Level (TPL) Assessment Methodology

Energy Technology Data Exchange (ETDEWEB)

Weber, Jochem [National Renewable Energy Lab. (NREL), Golden, CO (United States); Roberts, Jesse D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Babarit, Aurelien [Ecole Centrale de Nantes (France). Lab. of Research in Hydrodynamics, Energetics and Atmospheric Environment (LHEEA); Costello, Ronan [Wave Venture, Penstraze (United Kingdom); Bull, Diana L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neilson, Kim [Ramboll, Copenhagen (Denmark); Bittencourt, Claudio [DNV GL, London (United Kingdom); Kennedy, Ben [Wave Venture, Penstraze (United Kingdom); Malins, Robert Joseph [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dykes, Katherine [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-09-01

This document presents the revised Technology Performance Level (TPL) assessment methodology. There are three parts to this revised methodology 1) the Stakeholder Needs and Assessment Guidance (this document), 2) the Technical Submission form, 3) the TPL scoring spreadsheet. The TPL assessment is designed to give a technology neutral or agnostic assessment of any wave energy converter technology. The focus of the TPL is on the performance of the technology in meeting the customer’s needs. The original TPL is described in [1, 2] and those references also detail the critical differences in the nature of the TPL when compared to the more widely used technology readiness level (TRL). (Wave energy TRL is described in [3]). The revised TPL is particularly intended to be useful to investors and also to assist technology developers to conduct comprehensive assessments in a way that is meaningful and attractive to investors. The revised TPL assessment methodology has been derived through a structured Systems Engineering approach. This was a formal process which involved analyzing customer and stakeholder needs through the discipline of Systems Engineering. The results of the process confirmed the high level of completeness of the original methodology presented in [1] (as used in the Wave Energy Prize judging) and now add a significantly increased level of detail in the assessment and an improved more investment focused structure. The revised TPL also incorporates the feedback of the Wave Energy Prize judges.

Performance assessment of hybrid power generation systems: Economic and environmental impacts

International Nuclear Information System (INIS)

Al-Sharafi, Abdullah; Yilbas, Bekir S.; Sahin, Ahmet Z.; Ayar, T.

2017-01-01

Highlights: • A double-step optimization tool for hybrid power generation systems is introduced. • Economical aspects and the impact of the system on the environment are considered. • A hybrid system comprises PV array-wind turbine-battery-diesel engine is considered. • Real time analysis of the system for full year simulation is carried out. • System optimum configuration at point where total performance index is maximized. - Abstract: This article aims to introduce a double-step performance assessment tool for the hybrid power generation systems. As a case study, a hybrid system comprising PV array, wind-turbine, battery bank and diesel engine is incorporated in hourly based simulations to meet power demand of a residence unit at Dhahran area, Kingdom of Saudi Arabia. Different indicators related to economical and environmental performance assessments of the hybrid system have been considered. In the economic related assessment case, cost of electricity, energy excess percentage, and operating life cycle indicators have been considered and combined to develop the first overall performance index. Renewable contribution, renewable source availability and environmental impact indicators have been considered for the environmental assessment case and they are combined in the second performance index. For either economical or environmental cases, the optimum configuration of the system is achieved by maximizing the first and second overall performance indicators. This innovative optimization tools gives the designer the freedom to assign suitable weights associated with economical aspect, environmental impact, governmental regulations and social impact, for the first and second overall performance indicators, and combine them in the total performance index. The optimum system configuration is at the point where the total performance index is maximized.

The DECADE performance assessment program

International Nuclear Information System (INIS)

Weber, B.V.; Ottinger, P.F.; Commisso, R.J.; Thompson, J.; Rowley, J.E.; Filios, P.; Babineau, M.A.

1996-01-01

Previous analyses of DECADE Module 1 experiments indicated significant current loss between the plasma opening switch (POS) and an electron-beam load. A program was initiated to diagnose and improve the power flow to assess the performance of a multi-module DECADE system. Power flow measurements between the POS and load indicate high vacuum flow, distributed current loss and azimuthal asymmetries. A decreased load impedance reduces the fraction of the load current flowing in vacuum. Improved plasma source symmetry reduces losses near the load for long conduction times. Increased POS impedance is required to significantly improve the power coupling to the load. (author). 6 figs., 9 refs

The DECADE performance assessment program

Energy Technology Data Exchange (ETDEWEB)

Weber, B V; Ottinger, P F; Commisso, R J [Naval Research Lab., Washington, DC (United States). Plasma Physics Div.; Goyer, J R; Kortbawi, D [Physics International Co., Berkeley, CA (United States); Thompson, J [Maxwell Labs., San Diego, CA (United States); Rowley, J E; Filios, P [Defense Nuclear Agency, Alexandria, VA (United States); Babineau, M A [Sverdlup Technology, Tullahoma, TN (United States)

1997-12-31

Previous analyses of DECADE Module 1 experiments indicated significant current loss between the plasma opening switch (POS) and an electron-beam load. A program was initiated to diagnose and improve the power flow to assess the performance of a multi-module DECADE system. Power flow measurements between the POS and load indicate high vacuum flow, distributed current loss and azimuthal asymmetries. A decreased load impedance reduces the fraction of the load current flowing in vacuum. Improved plasma source symmetry reduces losses near the load for long conduction times. Increased POS impedance is required to significantly improve the power coupling to the load. (author). 6 figs., 9 refs.

Psychomotor skills assessment in practicing surgeons experienced in performing advanced laparoscopic procedures.

Science.gov (United States)

Gallagher, Anthony G; Smith, C Daniel; Bowers, Steven P; Seymour, Neal E; Pearson, Adam; McNatt, Steven; Hananel, David; Satava, Richard M

2003-09-01

Minimally invasive surgery (MIS) has introduced a new and unique set of psychomotor skills for a surgeon to acquire and master. Although assessment technologies have been proposed, precise and objective psychomotor skills assessment of surgeons performing laparoscopic procedures has not been detailed. Two hundred ten surgeons attending the 2001 annual meeting of the American College of Surgeons in New Orleans who reported having completed more than 50 laparoscopic procedures participated. Subjects were required to complete one box-trainer laparoscopic cutting task and a similar virtual reality task. These tasks were specifically designed to test only psychomotor and not cognitive skills. Both tasks were completed twice. Performance of tasks was assessed and analyzed. Demographic and laparoscopic experience data were also collected. Complete data were available on 195 surgeons. In this group, surgeons performed the box-trainer task better with their dominant hand (p psychomotor skills is now possible. Surgeons who had performed more than 50 laparoscopic procedures showed considerable variability in their performance on a simple laparoscopic and virtual reality task. Approximately 10% of surgeons tested performed the task significantly worse than the group's average performance. Studies such as this may form the methodology for establishing criteria levels and performance objectives in objective assessment of the technical skills component of determining surgical competence.

Iodine-129 Dose in LLW Disposal Facility Performance Assessments

International Nuclear Information System (INIS)

Wilhite, E.L.

1999-01-01

Iodine-129 has the lowest Performance Assessment derived inventory limit in SRS disposal facilities. Because iodine is concentrated in the body to one organ, the thyroid, it has been thought that dilution with stable iodine would reduce the dose effects of 129I.Examination of the dose model used to establish the Dose conversion factor for 129I shows that, at the levels considered in performance assessments of low-level waste disposal facilities, the calculated 129I dose already accounts for ingestion of stable iodine. At higher than normal iodine ingestion rates, the uptake of iodine by the thyroid itself decrease, which effectively cancels out the isotopic dilution effect

PERFORMANCE ASSESSMENT AND GEOMETRIC CALIBRATION OF RESOURCESAT-2

Directory of Open Access Journals (Sweden)

P. V. Radhadevi

2016-06-01

Full Text Available Resourcesat-2 (RS-2 has successfully completed five years of operations in its orbit. This satellite has multi-resolution and multi-spectral capabilities in a single platform. A continuous and autonomous co-registration, geo-location and radiometric calibration of image data from different sensors with widely varying view angles and resolution was one of the challenges of RS-2 data processing. On-orbit geometric performance of RS-2 sensors has been widely assessed and calibrated during the initial phase operations. Since then, as an ongoing activity, various geometric performance data are being generated periodically. This is performed with sites of dense ground control points (GCPs. These parameters are correlated to the direct geo-location accuracy of the RS-2 sensors and are monitored and validated to maintain the performance. This paper brings out the geometric accuracy assessment, calibration and validation done for about 500 datasets of RS-2. The objectives of this study are to ensure the best absolute and relative location accuracy of different cameras, location performance with payload steering and co-registration of multiple bands. This is done using a viewing geometry model, given ephemeris and attitude data, precise camera geometry and datum transformation. In the model, the forward and reverse transformations between the coordinate systems associated with the focal plane, payload, body, orbit and ground are rigorously and explicitly defined. System level tests using comparisons to ground check points have validated the operational geo-location accuracy performance and the stability of the calibration parameters.

Current Methods Applied to Biomaterials - Characterization Approaches, Safety Assessment and Biological International Standards.

Science.gov (United States)

Oliveira, Justine P R; Ortiz, H Ivan Melendez; Bucio, Emilio; Alves, Patricia Terra; Lima, Mayara Ingrid Sousa; Goulart, Luiz Ricardo; Mathor, Monica B; Varca, Gustavo H C; Lugao, Ademar B

2018-04-10

Safety and biocompatibility assessment of biomaterials are themes of constant concern as advanced materials enter the market as well as products manufactured by new techniques emerge. Within this context, this review provides an up-to-date approach on current methods for the characterization and safety assessment of biomaterials and biomedical devices from a physicalchemical to a biological perspective, including a description of the alternative methods in accordance with current and established international standards. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Ipsilesional upper limb performance in stroke individuals: relationship among outcomes of different tests used to assess hand function

Directory of Open Access Journals (Sweden)

Bianca Pinto Cunha

Full Text Available Abstract Introduction: Stroke individuals have sensorimotor repercussions on their ipsilesional upper limb. Therefore, it is important to use tests that allow an adequate assessment and follow-up of such deficits. Physical and occupational therapists commonly use maximal grip strength tests to assess the functional condition of stroke individuals. However, one could ask whether a single test is able to characterize the hand function in this population. Objective: The aim of this study was to investigate the relationship among outcomes of different tests frequently used to describe the function of the hand in the ipsilesional upper limb of stroke individuals. Methods: Twenty-two stroke individuals performed four hand function tests: maximal handgrip strength (HGSMax, maximal pinch grip strength (PGSMax, Jebsen-Taylor Hand Function Test (JTHFT and Nine Hole Peg Test (9-HPT. All tests were performed with the ipsilesional hand. Pearson's correlation analyses were performed. Results: the results indicated a moderate and positive relationship between HGSMax and JTHFT (r = 0.50 and between JTHFT and 9-HPT (r = 0.55. Conclusion: We conclude that the existence of only moderate relationships between test outcomes demonstrates the need to use at least two instruments to better describe the ipsilesional hand function of stroke individuals.

performance assessment of substation site earthing using fluke ...

African Journals Online (AJOL)

2013-03-01

Mar 1, 2013 ... Earthing is the fundamental requirement for protection in all electrical ... for the performance assessment of this instrument as compare to the conventional system. ... tem and the reference earth at a given operating fre- quency ...

Total system performance assessment - 1995: An evaluation of the potential Yucca Mountain repository

International Nuclear Information System (INIS)

Atkins, J.E.; Lee, J.H.; Lingineni, S.; Mishra, S.; McNeish, J.A.; Sassani, D.C.; Sevougian, S.D.

1995-11-01

The U.S. Department of Energy (DOE) is currently investigating the feasibility of permanently disposing the nation's commercial high-level radioactive wastes (in the form of spent fuel from the over 100 electric power-generating nuclear reactors across the U.S.) and a portion of the defense high-level radioactive wastes (currently stored at federal facilities around the country) in the unsaturated tuffaceous rocks at Yucca Mountain, Nevada. Quantitative predictions based on the most current understanding of the processes and parameters potentially affecting the long-term behavior of the disposal system are used to assess the ability of the site and its associated engineered designs to meet regulatory objectives of the US NRC and the US EPA. The evaluation of the ability of the overall system to meet the performance objectives specified in the applicable regulatory standards has been termed total system performance assessment (TSPA). Total system performance assessments require the explicit quantification of the relevant processes and process interactions. In addition assessments are useful to help define the most significant processes, the information gaps and uncertainties and therefore the additional information required for more robust and defensible assessment of the overall performance. The aim of any total system performance assessment is to be as complete and reasonably conservative as possible and to assure that the descriptions of the predictive models and parameters are sufficient to ascertain their accuracy. Total system performance assessments evolve with time. Previous iterations of total system performance assessment of the Yucca Mountain site and associated engineered barriers have been conducted in 1991 and 1993

Total system performance assessment - 1995: An evaluation of the potential Yucca Mountain repository

Energy Technology Data Exchange (ETDEWEB)

Atkins, J.E.; Lee, J.H.; Lingineni, S.; Mishra, S; McNeish, J.A.; Sassani, D.C.; Sevougian, S.D.

1995-11-01

The U.S. Department of Energy (DOE) is currently investigating the feasibility of permanently disposing the nation`s commercial high-level radioactive wastes (in the form of spent fuel from the over 100 electric power-generating nuclear reactors across the U.S.) and a portion of the defense high-level radioactive wastes (currently stored at federal facilities around the country) in the unsaturated tuffaceous rocks at Yucca Mountain, Nevada. Quantitative predictions based on the most current understanding of the processes and parameters potentially affecting the long-term behavior of the disposal system are used to assess the ability of the site and its associated engineered designs to meet regulatory objectives of the US NRC and the US EPA. The evaluation of the ability of the overall system to meet the performance objectives specified in the applicable regulatory standards has been termed total system performance assessment (TSPA). Total system performance assessments require the explicit quantification of the relevant processes and process interactions. In addition assessments are useful to help define the most significant processes, the information gaps and uncertainties and therefore the additional information required for more robust and defensible assessment of the overall performance. The aim of any total system performance assessment is to be as complete and reasonably conservative as possible and to assure that the descriptions of the predictive models and parameters are sufficient to ascertain their accuracy. Total system performance assessments evolve with time. Previous iterations of total system performance assessment of the Yucca Mountain site and associated engineered barriers have been conducted in 1991 and 1993.

THE NEED AND OPPORTUNITIES FOR PERFORMANCE ASSESSMENT IN HIGHER EDUCATION

Directory of Open Access Journals (Sweden)

Gabriella KECZER

2007-01-01

Full Text Available Motivating employees is one of the highly important areas of human resources management (HRM. As people are best motivated by their intention to satisfy their own needs, the task of HRM is to satisfy the employees’ need for remuneration in a fair and just manner. This can be achieved if an organization operates a formal and professional system of performance assessment. The importance of having such a system in place is further confirmed by the fact that six out of the seven large Hungarian corporations reviewed operate a global system of performance assessment. In areas where intellectual activity plays a dominant role, as is the case with higher education, omitting an evaluation of the performance of „white collar workers” is, of course, out of the question. Satisfying the employees’ need for fair remuneration in the public sphere, including higher education (HE, is essentially hindered by a lack of evaluating individual performance and, hence, performance-dependent wages and financial benefits derived from extra performance. Given the centrally determined and uniform wage schedule, there is almost no opportunity to differentiate between the performance of one person in a given wage category and another. This entails, at least for a large part of public employees and public servants, a lack of drive to perform better than average. These people could be forced to make greater efforts only by way of measuring their performance on an individual basis and applying a wage system that would rely on individual output and represent a system of wages that would be both differentiated and motivating. In the first part of my paper, I will present the performance assessment methods applied by the large Hungarian enterprises included in the investigation. The second part will deal with the issue of how all of this can be actually implemented in HE.

Data farming in support of HLA performance assessment

NARCIS (Netherlands)

Cramp, A.J.; Berg, T.W. van den; Huiskamp, W.

2014-01-01

Performance assessment is a key factor in designing distributed simulation environments that are fit-forpurpose and cost-effective. Simulations used for training applications should provide the required level of responsiveness and interactivity. Simulations used for analysis or decision support

Quantitative assessment of finger motor performance: Normative data.

Directory of Open Access Journals (Sweden)

Alessio Signori

Full Text Available Finger opposition movements are the basis of many daily living activities and are essential in general for manipulating objects; an engineered glove quantitatively assessing motor performance during sequences of finger opposition movements has been shown to be useful to provide reliable measures of finger motor impairment, even subtle, in subjects affected by neurological diseases. However, the obtained behavioral parameters lack published reference values.To determine mean values for different motor behavioral parameters describing the strategy adopted by healthy people in performing repeated sequences of finger opposition movements, examining associations with gender and age.Normative values for finger motor performance parameters were obtained on a sample of 255 healthy volunteers executing sequences of finger-to-thumb opposition movements, stratified by gender and over a wide range of ages. Touch duration, inter-tapping interval, movement rate, correct sequences (%, movements in advance compared with a metronome (% and inter-hand interval were assessed.Increasing age resulted in decreased movement speed, advance movements with respect to a cue, correctness of sequences, and bimanual coordination. No significant performance differences were found between male and female subjects except for the duration of the finger touch, the interval between two successive touches and their ratio.We report age- and gender-specific normal mean values and ranges for different parameters objectively describing the performance of finger opposition movement sequences, which may serve as useful references for clinicians to identify possible deficits in subjects affected by diseases altering fine hand motor skills.

Communicating Performance Assessments Results - 13609

Energy Technology Data Exchange (ETDEWEB)

Layton, Mark [Savannah River Remediation LLC, Building 705-1C, Aiken, SC 29808 (United States)

2013-07-01

The F-Area Tank Farms (FTF) and H-Area Tank Farm (HTF) are owned by the U.S. Department of Energy (DOE) and operated by Savannah River Remediation LLC (SRR), Liquid Waste Operations contractor at DOE's Savannah River Site (SRS). The FTF and HTF are active radioactive waste storage and treatment facilities consisting of 51 carbon steel waste tanks and ancillary equipment such as transfer lines, evaporators and pump tanks. Performance Assessments (PAs) for each Tank Farm have been prepared to support the eventual closure of the underground radioactive waste tanks and ancillary equipment. PAs provide the technical bases and results to be used in subsequent documents to demonstrate compliance with the pertinent requirements for final closure of the Tank Farms. The Tank Farms are subject to a number of regulatory requirements. The State regulates Tank Farm operations through an industrial waste water permit and through a Federal Facility Agreement approved by the State, DOE and the Environmental Protection Agency (EPA). Closure documentation will include State-approved Tank Farm Closure Plans and tank-specific closure modules utilizing information from the PAs. For this reason, the State of South Carolina and the EPA must be involved in the performance assessment review process. The residual material remaining after tank cleaning is also subject to reclassification prior to closure via a waste determination pursuant to Section 3116 of the Ronald W. Reagan National Defense Authorization Act of Fiscal Year 2005. PAs are performance-based, risk-informed analyses of the fate and transport of FTF and HTF residual wastes following final closure of the Tank Farms. Since the PAs serve as the primary risk assessment tools in evaluating readiness for closure, it is vital that PA conclusions be communicated effectively. In the course of developing the FTF and HTF PAs, several lessons learned have emerged regarding communicating PA results. When communicating PA results it is

Communicating Performance Assessments Results - 13609

International Nuclear Information System (INIS)

Layton, Mark

2013-01-01

The F-Area Tank Farms (FTF) and H-Area Tank Farm (HTF) are owned by the U.S. Department of Energy (DOE) and operated by Savannah River Remediation LLC (SRR), Liquid Waste Operations contractor at DOE's Savannah River Site (SRS). The FTF and HTF are active radioactive waste storage and treatment facilities consisting of 51 carbon steel waste tanks and ancillary equipment such as transfer lines, evaporators and pump tanks. Performance Assessments (PAs) for each Tank Farm have been prepared to support the eventual closure of the underground radioactive waste tanks and ancillary equipment. PAs provide the technical bases and results to be used in subsequent documents to demonstrate compliance with the pertinent requirements for final closure of the Tank Farms. The Tank Farms are subject to a number of regulatory requirements. The State regulates Tank Farm operations through an industrial waste water permit and through a Federal Facility Agreement approved by the State, DOE and the Environmental Protection Agency (EPA). Closure documentation will include State-approved Tank Farm Closure Plans and tank-specific closure modules utilizing information from the PAs. For this reason, the State of South Carolina and the EPA must be involved in the performance assessment review process. The residual material remaining after tank cleaning is also subject to reclassification prior to closure via a waste determination pursuant to Section 3116 of the Ronald W. Reagan National Defense Authorization Act of Fiscal Year 2005. PAs are performance-based, risk-informed analyses of the fate and transport of FTF and HTF residual wastes following final closure of the Tank Farms. Since the PAs serve as the primary risk assessment tools in evaluating readiness for closure, it is vital that PA conclusions be communicated effectively. In the course of developing the FTF and HTF PAs, several lessons learned have emerged regarding communicating PA results. When communicating PA results it is

Performance assessment instrument to assess the senior high students' psychomotor for the salt hydrolysis material

Science.gov (United States)

Nahadi, Firman, Harry; Yulina, Erlis

2016-02-01

The purposes of this study were to develop a performance assessment instrument for assessing the competence of psychomotor high school students on salt hydrolysis concepts. The design used in this study was the Research & Development which consists of three phases: development, testing and application of instruments. Subjects in this study were high school students in class XI science, which amounts to 93 students. In the development phase, seven validators validated 17 tasks instrument. In the test phase, we divided 19 students into three-part different times to conduct performance test in salt hydrolysis lab work and observed by six raters. The first, the second, and the third groups recpectively consist of five, six, and eight students. In the application phase, two raters observed the performance of 74 students in the salt hydrolysis lab work in several times. The results showed that 16 of 17 tasks of performance assessment instrument developed can be stated to be valid with CVR value of 1,00 and 0,714. While, the rest was not valid with CVR value was 0.429, below the critical value (0.622). In the test phase, reliability value of instrument obtained were 0,951 for the five-student group, 0,806 for the six-student group and 0,743 for the eight-student group. From the interviews, teachers strongly agree with the performance instrument developed. They stated that the instrument was feasible to use for maximum number of students were six in a single observation.

Seismic performance assessment of base-isolated safety-related nuclear structures

Science.gov (United States)

Huang, Y.-N.; Whittaker, A.S.; Luco, N.

2010-01-01

Seismic or base isolation is a proven technology for reducing the effects of earthquake shaking on buildings, bridges and infrastructure. The benefit of base isolation has been presented in terms of reduced accelerations and drifts on superstructure components but never quantified in terms of either a percentage reduction in seismic loss (or percentage increase in safety) or the probability of an unacceptable performance. Herein, we quantify the benefits of base isolation in terms of increased safety (or smaller loss) by comparing the safety of a sample conventional and base-isolated nuclear power plant (NPP) located in the Eastern U.S. Scenario- and time-based assessments are performed using a new methodology. Three base isolation systems are considered, namely, (1) Friction Pendulum??? bearings, (2) lead-rubber bearings and (3) low-damping rubber bearings together with linear viscous dampers. Unacceptable performance is defined by the failure of key secondary systems because these systems represent much of the investment in a new build power plant and ensure the safe operation of the plant. For the scenario-based assessments, the probability of unacceptable performance is computed for an earthquake with a magnitude of 5.3 at a distance 7.5 km from the plant. For the time-based assessments, the annual frequency of unacceptable performance is computed considering all potential earthquakes that may occur. For both assessments, the implementation of base isolation reduces the probability of unacceptable performance by approximately four orders of magnitude for the same NPP superstructure and secondary systems. The increase in NPP construction cost associated with the installation of seismic isolators can be offset by substantially reducing the required seismic strength of secondary components and systems and potentially eliminating the need to seismically qualify many secondary components and systems. ?? 2010 John Wiley & Sons, Ltd.

A CONCEPTUAL TOOL FOR ASSESSING CLIENT PERFORMANCE IN THE CONSTRUCTION PROJECT COALITION

Directory of Open Access Journals (Sweden)

Gary D. Holt

2002-01-01

Full Text Available Due to the significant impact of client performance on overall project performance and the interdependence of participant%5C%27s performance in the construction project coalition %28i.e. clients%2C designers and constructors%29%2C there is a need to establish client performance measures. Based on data collected from in-depth interviews with nineteen UK architects and nine UK contractors%2C a generic tool for the on-going formal assessment of client performance is presented. It was found that this approach to performance assessment %28i.e. from the view point of other%2C non-client coalition participants%29 should lead to improved project relationships. Data analysis showed that in addition to %5C%27harder%5C%27 measures such as understanding of project requirements and finance%2C other%2C %5C%27softer%5C%27 measures of client performance %28e.g. attitude%29 were worthy of consideration since they determine the quality of participant relationships. It is recommended that the tool be used to promote more effective client performance and thus enhance coalition relationships%2C enabling continuous improvement. The ultimate aim is to develop similar tools for the assessment of all coalition participants based on a culture of openness and trust. Abstract in Bahasa Indonesia : assessment+tool%2C+coalition+participants%2C+client+performance%2C+perceptions%2C+performance+measures%2C+satisfaction.

Diagnostic performance of cytology for assessment of hepatic lipid content in dairy cattle.

Science.gov (United States)

Fry, M M; Yao, B; Ríos, C; Wong, C; Mann, S; McArt, J A A; Nydam, D V; Leal Yepes, F A; Viesselmann, L; Geick, A; Goldin, K; Jordan, A; Behling-Kelly, E

2018-02-01

The objective of our study was to characterize the diagnostic performance of cytology for assessing hepatic lipid content (HLC) in dairy cows by comparing microscopic evaluation of lipid vacuolation in touch imprint slide preparations of liver biopsies with quantitative measurement of triglyceride concentration ([TG]; mg/mg of wet weight) in paired biopsy samples. Our study also sought to compare the diagnostic performance of liver cytology, plasma nonesterified fatty acid concentration ([NEFA]), and plasma β-hydroxybutyrate concentration ([BHB]) derived from a measurement performed on whole blood, for assessing HLC. Chemical extraction of TG from liver tissue remains the gold standard for quantifying HLC, largely because available blood tests, although useful for detecting some types of pathology, such as increased lipid mobilization, ketosis, or hepatocellular injury, are nonspecific as to etiology. Veterinary practitioners can sample bovine liver for cytological evaluation in a fast, minimally invasive, and inexpensive manner. Thus, if highly predictive of HLC, cytology would be a practical diagnostic tool for dairy veterinarians. In our study, liver biopsy samples from Holstein cows (219 samples from 105 cows: 52 from cows 2 to 20 d prepartum, 105 from cows 0 to 10 d in milk, 62 from cows 18 to 25 d in milk) were used to prepare cytology slides and to quantify [TG] using the Folch extraction method followed by the Hantzch condensation reaction and spectrophotometric measurement. An ordinal scale (0-4) based on amount of hepatocellular cytoplasm occupied by discrete clear vacuoles was used by 3 blinded, independent observers to rank HLC in Wright-Giemsa-stained slides. Interobserver agreement in cytology scoring was good. Corresponding plasma [NEFA] and [BHB] measurements were available for 187 and 195 of the 219 samples, respectively. Liver [TG] correlated more strongly with cytology score than with NEFA or BHB, and receiver operating characteristic curve

ASSESSING UNIVERSITY RESEARCH PERFORMANCE WITH MULTIPLE CONSTITUENCIES

Directory of Open Access Journals (Sweden)

Kuang-Liang Liu

2012-12-01

Full Text Available The research performance of the university is critical to the national competitiveness. Previous research has established that research performance is based on scholarly publishing. Several studies suggested that journal ranking is the important research quality indicator. However, unilateral measurement for the research performance will seriously corrode the development of university research work. Assessing university research performance with multiple constituencies is a better to enhance the university research. Although substantial studies have been performed on the critical factors that affect knowledge exploration in the university, those in knowledge exploitation are still lacking. With the multiple constituencies, a fully understanding of research performance can be gained. In the research model, knowledge exploration represents the academic research and knowledge exploitation represents the university–industry collaboration. Data collected from 124 university data in online database. The study shows that knowledge exploration and exploitation both are significant positive predictors of university competitiveness. University resources play important roles to affect both knowledge exploration and exploitation in the university. The study also shows that higher knowledge exploration will enhance knowledge exploitation. Implications for theory and practice and suggestions for future research are discussed.

Beginning science teachers' performances: Assessment in times of reform

Science.gov (United States)

Budzinsky, Fie K.

2000-10-01

The current reform in science education and the research on effective teaching and student learning have reinforced the importance of teacher competency. To better measure performances in the teaching of science, performance assessment has been added to Connecticut's licensure process for beginning science teachers. Teaching portfolios are used to document teaching and learning over time. Portfolios, however, are not without problems. One of the major concerns with the portfolio assessment process is its subjectivity. Assessors may not have opportunities to ask clarifying or follow-up questions to enhance the interpretation of a teacher's performance. In addition, portfolios often contain components based on self-documentation, which are subjective. Furthermore, the use of portfolios raises test equity issues. These concerns present challenges for persons in charge of establishing the validity of a portfolio-based licensure process. In high-stakes decision processes, such as teaching licensure, the validity of the assessment instruments must be studied. The primary purpose of this study was to explore the criterion-related validity of the Connecticut State Department of Education's Beginning Science Teaching Portfolio by comparing the interpretations of performances from science teaching portfolios to those derived from another assessment method, the Expert Science Teaching Educational and Evaluation Model, (ESTEEM). The analysis of correlations between the Beginning Science Teaching Portfolio and ESTEEM instrument scores was the primary method for establishing support for validity. The results indicated moderate correlations between all Beginning Science Teaching Portfolio and ESTEEM category and total variables. Multiple regression was used to examine whether differences existed in beginning science teachers' performances based on gender, poverty group, school level, and science discipline taught. None of these variables significantly contributed to the

Used Nuclear Fuel Loading and Structural Performance Under Normal Conditions of Transport- Demonstration of Approach and Results on Used Fuel Performance Characterization

Energy Technology Data Exchange (ETDEWEB)

Adkins, Harold [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Geelhood, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Koeppel, Brian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Coleman, Justin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bignell, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Flores, Gregg [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wang, Jy-An [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sanborn, Scott [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Spears, Robert [Idaho National Lab. (INL), Idaho Falls, ID (United States); Klymyshyn, Nick [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2013-09-30

This document addresses Oak Ridge National Laboratory milestone M2FT-13OR0822015 Demonstration of Approach and Results on Used Nuclear Fuel Performance Characterization. This report provides results of the initial demonstration of the modeling capability developed to perform preliminary deterministic evaluations of moderate-to-high burnup used nuclear fuel (UNF) mechanical performance under normal conditions of storage (NCS) and normal conditions of transport (NCT) conditions. This report also provides results from the sensitivity studies that have been performed. Finally, discussion on the long-term goals and objectives of this initiative are provided.

Radio-ecological characterization and radiological assessment in support of regulatory supervision of legacy sites in northwest Russia

International Nuclear Information System (INIS)

Sneve, M.K.; Kiselev, M.; Shandala, N.K.

2014-01-01

The Norwegian Radiation Protection Authority has been implementing a regulatory cooperation program in the Russian Federation for over 10 years, as part of the Norwegian government's Plan of Action for enhancing nuclear and radiation safety in northwest Russia. The overall long-term objective has been the enhancement of safety culture and includes a special focus on regulatory supervision of nuclear legacy sites. The initial project outputs included appropriate regulatory threat assessments, to determine the hazardous situations and activities which are most in need of enhanced regulatory supervision. In turn, this has led to the development of new and updated norms and standards, and related regulatory procedures, necessary to address the often abnormal conditions at legacy sites. This paper presents the experience gained within the above program with regard to radio-ecological characterization of Sites of Temporary Storage for spent nuclear fuel and radioactive waste at Andreeva Bay and Gremikha in the Kola Peninsula in northwest Russia. Such characterization is necessary to support assessments of the current radiological situation and to support prospective assessments of its evolution. Both types of assessments contribute to regulatory supervision of the sites. Accordingly, they include assessments to support development of regulatory standards and guidance concerning: control of radiation exposures to workers during remediation operations; emergency preparedness and response; planned radionuclide releases to the environment; development of site restoration plans, and waste treatment and disposal. Examples of characterization work are presented which relate to terrestrial and marine environments at Andreeva Bay. The use of this data in assessments is illustrated by means of the visualization and assessment tool (DATAMAP) developed as part of the regulatory cooperation program, specifically to help control radiation exposure in operations and to support

The reliability of in-training assessment when performance improvement is taken into account

NARCIS (Netherlands)

van Lohuizen, M.T.; Kuks, J.B.; van Hell, E.A.; Raat, A.N.; Stewart, R.E.; Cohen-Schotanus, J.

2010-01-01

During in-training assessment students are frequently assessed over a longer period of time and therefore it can be expected that their performance will improve. We studied whether there really is a measurable performance improvement when students are assessed over an extended period of time and how

Performance Parameters and Characterizations of Nanocrystals: A Brief Review

Directory of Open Access Journals (Sweden)

Manasi M. Chogale

2016-08-01

Full Text Available Poor bioavailability of drugs associated with their poor solubility limits the clinical effectiveness of almost 40% of the newly discovered drug moieties. Low solubility, coupled with a high log p value, high melting point and high dose necessitates exploration of alternative formulation strategies for such drugs. One such novel approach is formulation of the drugs as “Nanocrystals”. Nanocrystals are primarily comprised of drug and surfactants/stabilizers and are manufactured by “top-down” or “bottom-up” methods. Nanocrystals aid the clinical efficacy of drugs by various means such as enhancement of bioavailability, lowering of dose requirement, and facilitating sustained release of the drug. This effect is dependent on the various characteristics of nanocrystals (particle size, saturation solubility, dissolution velocity, which have an impact on the improved performance of the nanocrystals. Various sophisticated techniques have been developed to evaluate these characteristics. This article describes in detail the various characterization techniques along with a brief review of the significance of the various parameters on the performance of nanocrystals.

Technology-Supported Performance Assessments for Middle School Geoscience

Science.gov (United States)

Zalles, D. R.; Quellmalz, E.; Rosenquist, A.; Kreikemeier, P.

2002-12-01

Under funding from the World Bank, the U.S. Department of Education, the National Science Foundation, and the Federal Government's Global Learning and Observations to Benefit the Environment Program (GLOBE), SRI International has developed and piloted web-accessible performance assessments that measure K-12 students' abilities to use learning technologies to reason with scientific information and communicate evidence-based conclusions to scientific problems. This presentation will describe the assessments that pertain to geoscience at the middle school level. They are the GLOBE Assessments and EPA Phoenix, an instantiation of SRI's model of assessment design known as Integrative Performance Assessments in Technology (IPAT). All are publicly-available on the web. GLOBE engages students in scientific data collection and observation about the environment. SRI's classroom assessments for GLOBE provide sample student assessment tools and frameworks that allow teachers and students to assess how well students can use the data in scientific inquiry projects. Teachers can use classroom assessment tools on the site to develop integrated investigations for assessing GLOBE within their particular science curricula. Rubrics are provided for measuring students' GLOBE-related skills, and alignments are made to state, national, and international science standards. Sample investigations are provided about atmosphere, hydrology, landcover, soils, earth systems, and visualizations. The IPAT assessments present students with engaging problems rooted in science or social science content, plus sets of tasks and questions that require them to gather relevant information on the web, use reasoning strategies to analyze and interpret the information, use spreadsheets, word processors, and other productivity tools, and communicate evidence-based findings and recommendations. In the process of gathering information and drawing conclusions, students are assessed on how well they can operate

Deep geologic disposal. Lessons learnt from recent performance assessment studies

International Nuclear Information System (INIS)

Pescatore, C.; Andersson, J.

1998-01-01

Performance assessment (PA) studies are part of the decision basis for the siting, operation, and closure of deep repositories of long-lived nuclear wastes. In 1995 the NEA set up the Working Group on Integrated Performance Assessments of Deep Repositories (IPAG) with the goals to analyse existing PA studies, learn about what has been produced to date, and shed light on what could be done in future studies. Ten organisations submitted their most recent PA study for analysis and discussion, including written answers to over 70 questions. Waste management programmes, disposal concepts, geologies, and different types and amounts of waste offered a unique opportunity for exchanging information, assessing progress in PA since 1990, and identifying recent trends. A report was completed whose main lessons are overviewed. (author)

Improved power performance assessment methods

Energy Technology Data Exchange (ETDEWEB)

Frandsen, S; Antoniou, I; Dahlberg, J A [and others

1999-03-01

The uncertainty of presently-used methods for retrospective assessment of the productive capacity of wind farms is unacceptably large. The possibilities of improving the accuracy have been investigated and are reported. A method is presented that includes an extended power curve and site calibration. In addition, blockage effects with respect to reference wind speed measurements are analysed. It is found that significant accuracy improvements are possible by the introduction of more input variables such as turbulence and wind shear, in addition to mean wind speed and air density. Also, the testing of several or all machines in the wind farm - instead of only one or two - may provide a better estimate of the average performance. (au)

Performance assessment of coupled processes

International Nuclear Information System (INIS)

Pigford, T.H.

1987-01-01

The author considers all processes to be coupled. For example, a waste package heats the surrounding rock and its pore water, creating gradients in density and pressure that result in increased water flow. That process can be described as coupled, in that the flow is a consequence of heating. In a narrower sense, one speaks also of the more weakly coupled transport processes, expressed by the Onsager reciprocal relations, that state that a transport current, i.e., flux, of heat is accompanied by a small transport current of material, as evidenced in isotope separation by thermal diffusion, the Thompson effect in thermoelectricity, etc. This paper presents a performance assessment of coupled processes

Sensitivity and uncertainty analyses for performance assessment modeling

International Nuclear Information System (INIS)

Doctor, P.G.

1988-08-01

Sensitivity and uncertainty analyses methods for computer models are being applied in performance assessment modeling in the geologic high level radioactive waste repository program. The models used in performance assessment tend to be complex physical/chemical models with large numbers of input variables. There are two basic approaches to sensitivity and uncertainty analyses: deterministic and statistical. The deterministic approach to sensitivity analysis involves numerical calculation or employs the adjoint form of a partial differential equation to compute partial derivatives; the uncertainty analysis is based on Taylor series expansions of the input variables propagated through the model to compute means and variances of the output variable. The statistical approach to sensitivity analysis involves a response surface approximation to the model with the sensitivity coefficients calculated from the response surface parameters; the uncertainty analysis is based on simulation. The methods each have strengths and weaknesses. 44 refs

SKI SITE-94. Deep Repository Performance Assessment Project Volume I and II

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-01

The function of SITE-94 is to provide the Swedish Nuclear Power Inspectorate (SKI) with the capacity and supporting knowledge needed for reviewing the Swedish nuclear industry`s R and D programs and for reviewing license applications, as stipulated in Swedish legislation. The report is structured as a Performance Assessment exercise needed for input to decisions regarding repository safety, but the SITE-94 is not a safety assessment or a model for future assessments to be undertaken by the prospective licensee. The specific project objectives of SITE-94 comprise site evaluation, performance assessment methodology, canister integrity and radionuclide release and transport calculations. The report gives a detailed description of the many inter-related studies undertaken as part of the research project. As a general conclusion it is noted that the SITE-94 project has significantly advanced SKI`s capability of reviewing performance assessments and has led to the development of a tool-kit for carrying out assessment calculations, both in terms of numerical and scoping analyses. The study has highlighted a number of key issues for safety assessment (and consequently for disposal system design): Canister performance; Derived parameters of geosphere retention properties; Spatial variability of groundwater flow and geochemistry of migration paths; Time dependency (more emphasis on transient, time-dependent processes); Buffer evolution over long time. 488 refs.

SKI SITE-94. Deep Repository Performance Assessment Project Volume I and II

International Nuclear Information System (INIS)

1996-12-01

The function of SITE-94 is to provide the Swedish Nuclear Power Inspectorate (SKI) with the capacity and supporting knowledge needed for reviewing the Swedish nuclear industry's R and D programs and for reviewing license applications, as stipulated in Swedish legislation. The report is structured as a Performance Assessment exercise needed for input to decisions regarding repository safety, but the SITE-94 is not a safety assessment or a model for future assessments to be undertaken by the prospective licensee. The specific project objectives of SITE-94 comprise site evaluation, performance assessment methodology, canister integrity and radionuclide release and transport calculations. The report gives a detailed description of the many inter-related studies undertaken as part of the research project. As a general conclusion it is noted that the SITE-94 project has significantly advanced SKI's capability of reviewing performance assessments and has led to the development of a tool-kit for carrying out assessment calculations, both in terms of numerical and scoping analyses. The study has highlighted a number of key issues for safety assessment (and consequently for disposal system design): Canister performance; Derived parameters of geosphere retention properties; Spatial variability of groundwater flow and geochemistry of migration paths; Time dependency (more emphasis on transient, time-dependent processes); Buffer evolution over long time. 488 refs

Characterization and Performance of the Cananea Near-infrared Camera (CANICA)

Science.gov (United States)

Devaraj, R.; Mayya, Y. D.; Carrasco, L.; Luna, A.

2018-05-01

We present details of characterization and imaging performance of the Cananea Near-infrared Camera (CANICA) at the 2.1 m telescope of the Guillermo Haro Astrophysical Observatory (OAGH) located in Cananea, Sonora, México. CANICA has a HAWAII array with a HgCdTe detector of 1024 × 1024 pixels covering a field of view of 5.5 × 5.5 arcmin2 with a plate scale of 0.32 arcsec/pixel. The camera characterization involved measuring key detector parameters: conversion gain, dark current, readout noise, and linearity. The pixels in the detector have a full-well-depth of 100,000 e‑ with the conversion gain measured to be 5.8 e‑/ADU. The time-dependent dark current was estimated to be 1.2 e‑/sec. Readout noise for correlated double sampled (CDS) technique was measured to be 30 e‑/pixel. The detector shows 10% non-linearity close to the full-well-depth. The non-linearity was corrected within 1% levels for the CDS images. Full-field imaging performance was evaluated by measuring the point spread function, zeropoints, throughput, and limiting magnitude. The average zeropoint value in each filter are J = 20.52, H = 20.63, and K = 20.23. The saturation limit of the detector is about sixth magnitude in all the primary broadbands. CANICA on the 2.1 m OAGH telescope reaches background-limited magnitudes of J = 18.5, H = 17.6, and K = 16.0 for a signal-to-noise ratio of 10 with an integration time of 900 s.

Assessing the Performance of Educational Research in Australian Universities: An Alternative Perspective

Science.gov (United States)

Perry, Laura B.

2018-01-01

This study uses bibliometric data to assess the performance of educational research in Australian universities. It provides an alternative perspective to the Australian government's Excellence in Research for Australia (ERA) assessment. ERA results suggest that the performance of educational research is substantially less compared to other…