WorldWideScience

Sample records for channel development quarterly

  1. Baseline gas turbine development program. Eighteenth quarterly progress report

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, F W; Wagner, C E [comps.

    1977-04-30

    Progress is reported for a program whose goals are to demonstrate an experimental upgraded gas turbine powered automobile which meets the 1978 Federal Emissions Standards, has significantly improved fuel economy, and is competitive in performance, reliability, and potential manufacturing cost with the conventional piston engine powered, compact-size American automobile. Initial running of the upgraded engine took place on July 13, 1976. The engine proved to be mechanically sound, but was also 43% deficient in power. A continuing corrective development effort has to date reduced the power deficiency to 32%. Compressor efficiency was increased 2 points by changing to a 28-channel diffuser and tandem deswirl vanes; improved processing of seals has reduced regenerator leakage from about 5 to 2.5% of engine flow; a new compressor turbine nozzle has increased compressor turbine stage efficiency by about 1 point; and adjustments to burner mixing ports has reduced pressure drop from 2.8 to 2.1% of engine pressure. Key compressor turbine component improvements are scheduled for test during the next quarterly period. During the quarter, progress was also made on development of the Upgraded Vehicle control system; and instrumentation of the fourth program engine was completed by NASA. The engine will be used for development efforts at NASA LeRC.

  2. US energy industry financial developments, 1993 first quarter

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-25

    Net income for 259 energy companies-- including, 20 major US petroleum companies-- rose 38 percent between the first quarter of 1992 and the first quarter of 1993. An increased level of economic activity, along with colder weather, helped lift the demand for natural gas. crude oil, coal, and electricity. The sharp rise in the domestic price of natural gas at the wellhead relative to the year-ago quarter was the most significant development in US energy during the first quarter. As a consequence of higher natural gas prices, the upstream segment of the petroleum industry reported large gains in income, while downstream income rose due to higher refined product demand. Increased economic activity and higher weather-related natural gas demand also led to improvements in income for the rate-regulated energy segment. However, declining domestic oil production continued to restrain upstream petroleum industry earnings growth, despite a moderate rise in crude oil prices.

  3. US energy industry financial developments, First quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-19

    This report traces key developments in US energy companies` financial performance for the first quarter of 1995. Financial data (only available for publicly-traded US companies) are included in two broad groups -- fossil fuel production and rate-regulated utilities. All financial data are taken from public sources such as corporate reports and press releases, energy trade publications, and The Wall Street Journal`s Earnings Digest. Return on equity is calculated from data available from Standard and Poor`s Compustat data service. Since several major petroleum companies disclose their income by lines of business and geographic area, these data are also presented in this report. Although the disaggregated income concept varies by company and is not strictly comparable to corporate income, relative movements in income by lines of business and geographic area are summarized as useful indicators of short-term changes in the underlying profitability of these operations.

  4. MHD electrode development. Quarterly report, April-June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Sadler, J W; Dietrick, D L; Frantti, E W

    1980-08-01

    Emphasis within this program is now being directed towards the engineering development of cold metallic electrodes, and in particular the identification and evaluation of alternatives to platinum for use as anodes. A literature search, concentrating on hot corrosion resistant alloys, has been undertaken and results are presented. In addition, results of platinum-copper diffusion studies and a preliminary evaluation of sputter coated specimens of TiB/sub 2/ clad copper are reported. Laboratory anode arc erosion studies have continued. A number of modifications incorporated in the test setup are described. This modified test arrangement has been used to obtain comparative data on a number of potential anode metal alloys. Further work is required to refine the test, particularly to provide a reliable method of applying corrodent to the specimens under test. No significant laboratory electrochemical corrosion tests were completed during this reporting period. Facility test operations were suspended upon completion of WESTF Test 49 during the prior quarter to permit basic facility modifications in support of the addition of a 3 Tesla magnet. The status of design, procurement and modification activities is presented.

  5. Baseline Gas Turbine Development Program seventh quarterly progress report

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, F.W.

    1974-07-30

    Progress is reported for a program to demonstrate by 1976 an experimental gas turbine powered automobile which meets the 1976 Federal Emissions Standards, has significantly improved fuel economy, and is competitive in performance, reliability, and potential manufacturing cost with the conventional piston engine powered, standard size American automobile. All of the baseline vehicles are now operational and are performing Program tests. Vehicle tests completed in this quarter include noise reduction, heater, air conditioning, and underhood temperature evaluations. Testing was completed on the original endurance engine. Test cell evaluation of the government furnished combustor (Solar) has commenced. Vendor A and Vendor B ceramic regenerator cores were rig tested with an improved elastomeric drive. Vendor A cores with the elastomeric drive are being engine tested. Ceramic regenerator seal wear test rig results are showing promise of achieving a low friction, non-nickel-oxide rubbing surface. The first preprototype integrated control system was delivered and placed in operation on a baseline engine in a test cell. Six ribbed compressor turbine wheels made of IN 792/Hf by the AiResearch Airefrac process were received. Rig testing of the variable inlet guide Vanes was completed and engine testing initiated. Vehicle evaluations of the torque converter lock-up were completed . Specifications for the Upgraded Engine aerodymanic components were made. A subcontract is currently being arranged with Mechanical Technology Inc. (MTI) for design and development of the upgraded engine gas generator bearings and shaft system. An initial feasibility study for gas bearings was completed. Analytical design of the upgraded engine power turbine reduction gears and bearings has commenced. Engine and vehicle accessory drive studies for the upgraded engine are well underway.

  6. Illinois Association for Counseling and Development (IACD) Quarterly, 1990.

    Science.gov (United States)

    Illovsky, Michael E., Ed.

    1990-01-01

    This document consists of the four issues of the "IACD Quarterly" published in 1990. Articles in this volume include: (1) "A Comprehensive Program for Reducing School Anxieties in College Students" (David Ross); (2) "Issues in Child Custody Determination in Illinois" (Amy Jo Buwick); (3) "Finding Meaning in the Here and Now Through Gestalt Therapy…

  7. US Energy Industry Financial Developments, 1993 fourth quarter, April 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-14

    This report traces key financial trends in the US energy industry for the fourth quarter of 1993. Financial data (only available for publicly-traded US companies) are included in two broad groups -- fossil fuel production and rate-regulated electric utilities. All financial data are taken from public sources such as energy industry corporate reports and press releases, energy trade publications, and The Wall Street Journal`s Earnings Digest; return on equity is calculated from data available from Standard and Poor`s Compustat data service. Since several major petroleum companies disclose their income by lines of business and geographic area, these data are also presented in this report. Although the disaggregated income concept varies by company and is not strictly comparable to corporate income, relative movements in income by lines of business and geographic area are summarized as useful indicators of short-term changes in the underlying profitability of these operations. Based on information provided in 1993 fourth quarter financial disclosures, the net income for 82 petroleum companies -- including 18 majors -- was unchanged between the fourth quarter of 1992 and the fourth quarter of 1993. An 18-percent decline in crude oil prices resulted in a deterioration of the performance of upstream (oil and gas production) petroleum companies during the final quarter of 1993. However, prices for refined products fell much less than the price of crude oil, resulting in higher refined product margins and downstream (refining, marketing and transport) petroleum earnings. An increase in refined product demand also contributed to the rise in downstream income.

  8. Developing laminar flow in curved rectangular channels

    NARCIS (Netherlands)

    De Vriend, H.J.

    1978-01-01

    As an intermediate step between earlier investigations on fully developed laminar flow in curved channels of shallow rectancular wet cross-section and the mathematical modeling of turbulent flow in river bends, a mathematical model of developing laminar flow in such channels is investigated. The mos

  9. HYBRID SULFUR ELECTROLYZER DEVELOPMENT FY09 SECOND QUARTER REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Herman, D; David Hobbs, D; Hector Colon-Mercado, H; Timothy Steeper, T; John Steimke, J; Mark Elvington, M

    2009-04-15

    The primary objective of the DOE-NE Nuclear Hydrogen Initiative (NHI) is to develop the nuclear hydrogen production technologies necessary to produce hydrogen at a cost competitive with other alternative transportation fuels. The focus of the NHI is on thermochemical cycles and high temperature electrolysis that can be powered by heat from high temperature gas reactors. The Savannah River National Laboratory (SRNL) has been tasked with the primary responsibility to perform research and development in order to characterize, evaluate and develop the Hybrid Sulfur (HyS) thermochemical process. This report documents work during the first quarter of Fiscal Year 2009, for the period between January 1, 2009 and March 31, 2009. The HyS Process is a two-step hybrid thermochemical cycle that is part of the 'Sulfur Family' of cycles. As a sulfur cycle, it uses high temperature thermal decomposition of sulfuric acid to produce oxygen and to regenerate the sulfur dioxide reactant. The second step of the process uses a sulfur dioxide depolarized electrolyzer (SDE) to split water and produce hydrogen by electrochemically reacting sulfur dioxide with H{sub 2}O. The SDE produces sulfuric acid, which is then sent to the acid decomposer to complete the cycle. The DOE NHI program is developing the acid decomposer at Sandia National Laboratory for application to both the HyS Process and the Sulfur Iodine Cycle. The SDE is being developed at SRNL. During FY05 and FY06, SRNL designed and conducted proof-of-concept testing for a SDE using a low temperature, PEM fuel cell-type design concept. The advantages of this design concept include high electrochemical efficiency, small footprint and potential for low capital cost, characteristics that are crucial for successful implementation on a commercial scale. During FY07, SRNL extended the range of testing of the SDE to higher temperature and pressure, conducted a 100-hour longevity test with a 60-cm{sup 2} single cell electrolyzer

  10. Development of a Web-Based Quarterly Profile of Providers in ATP III Study

    OpenAIRE

    Wu, Cai; Steinbauer, Jeffrey R.; Kuo, Grace M.

    2005-01-01

    A Web-based programmed lipid management reminder system has been developed to evaluate physician compliance with the National Cholesterol Education Program’s Third Report of the Adult Treatment Panel Guidelines in primary care clinics. The system builds a knowledge-based database from an EMR database first, then generates quarterly profiles of providers and sends the profiles with a reminder letter to each participated physicians by email every quarter to help primary care p...

  11. US energy industry financial developments, 1994 first quarter

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-23

    This report traces key financial trends in the US energy industry for the first quarter of 1994. Financial data (only available for publicly-traded US companies) are included in two broad groups -- fossil fuel production and rate-regulated electric utilities. All financial data are taken from public sources such as energy industry corporate reports and press releases, energy trade publications, and The Wall Street Journal`s, Earnings Digest. Return on equity is calculated from data available from Standard and Poor`s Compustat data service. Since several major petroleum companies disclose their income by lines of business and geographic area. These data are also presented in this report. Although the disaggregated income concept varies by company and is not strictly comparable to corporate income, relative movements in income by lines of business and geographic area are summarized as useful indicators of short-term changes in the underlying profitability of these operations.

  12. Development of a control system for the teat-end vacuum in individual quarter milking systems.

    Science.gov (United States)

    Ströbel, Ulrich; Rose-Meierhöfer, Sandra; Oz, Hülya; Brunsch, Reiner

    2013-06-13

    Progress in sensor technique and electronics has led to a decrease in the costs of electronic and sensor components. In modern dairy farms, having udders in good condition, a lower frequency of udder disease and an extended service life of dairy cows will help ensure competitiveness. The objective of this study was to develop a teat-end vacuum control system with individual quarter actor reaction. Based on a review of the literature, this system is assumed to protect the teat tissue. It reduces the mean teat-end vacuum in the maximum vacuum phase (b) to a level of 20 kPa at a flow rate of 0.25 L/min per quarter. At flow rates higher than 1.50 L/min per quarter, the teat-end vacuum can be controlled to a level of 30 kPa, because in this case it is desirable to have a higher vacuum for the transportation of the milk to the receiver. With this system it is possible for the first time to supply the teat end with low vacuum at low flow rates and with higher vacuum at increasing flow rates in a continuous process with a three second reaction-rate on individual quarter level. This system is completely automated.

  13. [Paste deposition and chip bonding process development]. IBM, Endicott tenth quarterly report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    The scope of Endicott activity during this quarter includes: paste deposition process development and chip bonding process development. It was discovered that small voids exist in the photobumps. These are typically at the base of the bump and are believed to have always been present. Although the reliability test results have been positive and no failure is attributed to voids, the process development work during the last quarter has focused on understanding how these form and how to reduce them. High feed pressure, slow nozzle speed and lower viscosity reduce void formation. Nozzle design changes have been identified. One change will increase the shearing of the paste during feed, thus reducing the viscosity, a second change will allow higher feed pressures. Chip bonding process development has focused on correlating bonding results between the IBM in-house chip bonder made by Research Devices, Inc. and the Universal development bond tool. Two variables have been identified that correlate with poor bond results. The report describes more detail of the activity during the tenth quarter for paste deposition and chip bonding in each of these areas.

  14. Development of vanidum-phosphate catalysts for methanol production by selective oxidation of methane. Quarterly technical progress report, 1996

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, R.L.; Alptekin, G.O.

    1996-06-01

    Activities this past quarter, focused on acquisition of kinetic data for oxidation of formaldehyde and methanol on these catalysts. In the next quarter these results will be used to propose a simple reaction network and kinetic model. To date we have completed Task 1: Laboratory Setup and Task 2: Process Variable Study. Activities in the current quarter focused on finalizing these tasks and on Task 3: Promoters and Supports, this task is approximately 50% completed. Task 4: Advanced Catalysts is to be initiated in the next quarter. Specific accomplishments this quarter include: finalizing and calibrating a new reaction product analytical system with markedly improved precision and accuracy relative to older. approaches; development of procedures for accurately feeding formaldehyde to the reactor; examination of formaldehyde and methanol oxidation kinetics over vanadyl pyrophosphate at a range of temperatures; and preliminary studies of methane oxidation over a silica support.

  15. Biomass power for rural development. Quarterly report, April 2, 1997--July 2, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, J.T.

    1997-10-01

    The information in this report summarizes the major areas of project activities accomplished during the last quarter. Activities concerning conversion technologies have continued to be focused on gaining information and comparing similar systems world wide with project needs. One major effort was a trip to Denmark and Finland; the first section of the report details some of the trip highlights. The second section is a writeup of a previous trip. Additional conversion work undertaken at Iowa State University on the development of material handling, gas sampling, and gas analysis equipment is detailed. An update on the installation of field trial plots is also included. Very brief summaries are provided of quarterly activities, briquette production from switchgrass, and the development of geographical information systems are also included. 8 figs., 1 tab.

  16. Baseline Gas Turbine Development Program. Fourteenth quarterly progress report

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, F W; Wagner, C E

    1976-04-30

    Progress is reported for a Baseline Gas Turbine Development Program sponsored by the Heat Engine Systems Branch, Division of Transportation Energy Conservation (TEC) of the Energy Research and Development Administration (ERDA). Structurally, this program is made up of three parts: (1) documentation of the existing automotive gas turbine state-of-the-art; (2) conduction of an extensive component improvement program; and (3) utilization of the improvements in the design, and building of an Upgraded Engine capable of demonstrating program goals.

  17. Valve development for coal gasification plants: Phase I. Quarterly technical program report, January--April 1978

    Energy Technology Data Exchange (ETDEWEB)

    Bellezza, D.

    1978-08-01

    This document discusses engineering and development progress during the period of January to April 1978. The work performed during this quarter consisted of: Successful development testing of seat and visor materials for Task I, II, and IV valve applications; continued seat and visor development for Task III valve application; successful development testing of bearing systems; completion of Phase I Conceptual Design and Functional Analysis effort; completion of the Phase I Summary Review report; improvements to the Hot Test fixture for use in further seat and visor development tests for Task III valve application.

  18. Development program to support industrial coal gasification. Quarterly report 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-15

    The Development Program to Support Industrial Coal Gasification is on schedule. The efforts have centered on collecting background information and data, planning, and getting the experimental program underway. The three principal objectives in Task I-A were accomplished. The technical literature was reviewed, the coals and binders to be employed were selected, and tests and testing equipment to be used in evaluating agglomerates were developed. The entire Erie Mining facility design was reviewed and a large portion of the fluidized-bed coal gasification plant design was completed. Much of the work in Task I will be experimental. Wafer-briquette and roll-briquette screening tests will be performed. In Task II, work on the fluidized-bed gasification plant design will be completed and work on a plant design involving entrained-flow gasifiers will be initiated.

  19. Valve development for coal gasification plants. Phase II. Monthly/quarterly technical program report, January--March 1979

    Energy Technology Data Exchange (ETDEWEB)

    Bellezza, D.

    1979-04-01

    The eleventh in a series of Quarterly Technical Progress Reports relating to the Valve Development for Coal Gasification Plants Program discusses engineering progress during the period of January to March 1979.

  20. Baseline Gas Turbine Development Program ninth quarterly progress report

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, C.E.

    1975-01-31

    Progress is reported for a program to demonstrate by 1976 an experimental gas turbine powered automobile which meets the 1978 Federal Emissions Standards, has significantly improved fuel economy, and is competitive in performance, reliability, and potential manufacturing cost with the conventional piston engine powered, standard size American automobile. NASA completed the first phase of their baseline engine heat balance tests, and an upgraded engine compressor is being scaled for test. EPA completed their report on vehicle tests including emissions and vehicle performance, and a new endurance engine is on test. Significant development progress was made on both fixed and variable geometry combustors. After 45 hours of engine operation with Vendor A ceramic regenerator, no significant deterioration of the matrix, seals, or elastomeric mount was encountered. Ceramic regenerator stress analysis has commenced. Additional developments in non-nickel oxide regenerator rubbing seals are encouraging. The first preprototype integrated control system is in vehicle operation. Control adaptation for variable inlet guide vanes and water injection is progressing. AiRefrac turbine wheels were verified dimensionally and are being processed for engine testing. Water injection tests with a four nozzle system were run, and additional performance documentation of variable inlet guide vanes was obtained. Linerless insulation is on test in the free rotor engine, the new endurance engine, and a performance engine. The free rotor engine completed test cell checkout and was installed in a vehicle. Vehicle checkout, including a preprototype integrated control, is underway. Detailed specifications of the upgraded engine were written.

  1. Quarterly technical progress report, October-December 1982 on Energy Conversion Research and Development Programs

    Energy Technology Data Exchange (ETDEWEB)

    1983-10-01

    In this quarterly technical progress report, UTSI reports on the continued design work for the low mass flow train superheater. The detailed design of this component continued and the overall arrangement drawing for the superheater and air heater was finalized. The air heater procurement reached the point of contract award, but the actual purchase order award was held up pending receipt of additional funding from the Department of Energy. Testing activity reported includes two additional tests in the LMF1C series, which concludes this test series. Test data are presented, along with preliminary analyses for the combustor, nozzle, diagnostic channel, diffuser, radiant furnace/secondary combustor and Materials Test Module. In addition to the nitrogen oxide test measurements, corrosion and erosion rates for the boiler tube specimens and the materials test module are reported.

  2. Baseline Gas Turbine Development Program. Tenth quarterly progress report

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, F.W.; Wagner, C.E.

    1975-04-30

    Progress is reported for a program to demonstrate by 1976 an experimental gas turbine powered automobile which meets the 1978 Federal Emissions Standards, has significantly improved fuel economy, and is competitive in performance, reliability, and potential manufacturing cost with the conventional piston engine powered, standard size American automobile. A fuel control system is being developed to allow program evaluation of a very promising low emissions, single stage, fixed geometry proprietary burner. Ceramic regenerators are under test in the free-rotor vehicle, and some have completed 30 hours of performance evaluation. Three-dimensional ceramic regenerator transient thermal and structural analysis programs are operational. Initial friction and wear test fixture results show that zirconium oxide fully stabilized by yttrium oxide is an effective substitute for nickel oxide in a plasma sprayed seal. A preprototype control system was adapted for variable inlet guide vane control in a vehicle installation. An evaluation of the free-rotor accessory drive concept in a vehicle showed no serious mechanical integrity problems. Simplifications are being made to the water injection system; significant metallurgical analysis of observed erosion/corrosion problems was accomplished. Variable inlet guide vane aerodynamic loss characteristics were determined. Generally satisfactory results with linerless insulation are resulting in extended use and application. Pattern work for the upgraded engine housing and the power turbine wheel castings are in process. A computer design analysis of the regenerator drive gears was made, and an analysis was completed of a three peripheral roller regenerator support and drive proposal for the upgraded engine.

  3. Baseline Gas Turbine Development Program eighth quarterly progress report

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, C.E.

    1974-10-31

    Progress is reported for a program to demonstrate by 1976 an experimental gas turbine powered automobile which meets the 1978 Federal Emissions Standards, has significantly improved fuel economy, and is competitive in performance, reliability, and potential manufacturing cost with the conventional piston engine powered, standard size American automobile. Major preparations for engine heat balance tests by NASA were completed. EPA laboratories completed Baseline vehicle emissions, noise, and odor tests. Assembly of the program endurance engine is nearing completion. Test cell evaluation of the government furnished combustor (Solar) verified steady state emissions to be extremely low. Initial engine tests of Vendor A ceramic regenerator cores with an elastomeric drive verified performance predictions. Efforts towards developing a non-nickel oxide regenerator seal show extreme sensitivity to porosity differences between cores of different suppliers. All three preprototype integrated control systems were built. Modifications are being worked out to achieve a stable low speed operation. Two prototype compressor turbine wheels made from the reuseable pattern process are being inspected and processed for testing. The engine housing modified for operation at higher cycle temperatures and pressures was received. The baseline engine converted to free rotor is completing test cell check out. The modified vehicle is ready for engine installation. The upgraded engine characterization was updated to include the latest information on V.I.G.V., rotors, and bearings. The upgraded engine housing is being modeled physically and analytically for design and stress studies. An accessory drive system for the upgraded engine was selected, and a final layout is in process.

  4. Biomass power for rural development. Quarterly report, October 3, 1998--January 1, 1999

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, J.T.

    1999-02-01

    Information and education activities for this quarter include both the monthly progress activities with some copies of materials developed and a copy of the annual report prepared for the Leopold Center for Sustainable Agriculture. The Leopold Center is a project partner and the primary sponsor of the information and education activities. The Leopold annual report references many prepared documents and assorted presentation materials. The Energy and Geological Resources Division of the Iowa Department of Natural Resources sponsors a meeting four times a year in order to bring members of the Iowa biomass energy community together to share information. In this quarter the Stakeholders meeting was held on October 21, 1998, in Des Moines Iowa. The first phase of the Geographic Information System (GIS) efforts have been completed and a final report with a map presentation of materials will be included in the next Quarterly Report. A meeting with Ed Gray of The Antares Group and project staff/cooperators was held October 23, 1998. The authors discussed the Niagara Project and the efforts to value the biomass material and partner contributions. Niagara has identified a value to the grid support capabilities of the dispersed generation.

  5. Ion channels in development and cancer.

    Science.gov (United States)

    Bates, Emily

    2015-01-01

    Ion channels have emerged as regulators of developmental processes. In model organisms and in people with mutations in ion channels, disruption of ion channel function can affect cell proliferation, cell migration, and craniofacial and limb patterning. Alterations of ion channel function affect morphogenesis in fish, frogs, mammals, and flies, demonstrating that ion channels have conserved roles in developmental processes. One model suggests that ion channels affect proliferation and migration through changes in cell volume. However, ion channels have not explicitly been placed in canonical developmental signaling cascades until recently. This review gives examples of ion channels that influence developmental processes, offers a potential underlying molecular mechanism involving bone morphogenetic protein (BMP) signaling, and finally explores exciting possibilities for manipulating ion channels to influence cell fate for regenerative medicine and to impact disease.

  6. GLOBAL LOGISTICS AND INTERNATIONAL CHANNEL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Fani Mateska

    2015-01-01

    Full Text Available Business Logistics and Supply Chain Management (SCM are relatively new terms that emerged in recent years concerning to be modern terms compared to the more traditional fields of production, marketing or finance. By opening new stores globally, from which to source products, by increasing the number of retailers, wholesalers, agents and distributers in the global supply chain, as well as easing global transport, these events dramatically changed the way business looked at managing its physical operations. Therefore, this paper offers deep understanding of the main characteristics, new trends and evaluation of global logistics which referred to as global supply chain management. Global logistics plays critical role in the growth and development of world trade, and in the integration of business operations on a worldwide scale. This paper also emphasizes the differences between traditional and global supply chains, by explaining several alternative types of distribution channels that are part of the international distribution channels. Also, real world examples of global organizations and their global supply chain management processes are accurately described in the end of this paper.

  7. Industrial advanced turbine systems: Development and demonstration. Quarterly report, January 1--March 31, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-08-01

    The US Department of Energy (DOE) has initiated a program for advanced turbine systems (ATS) that will serve industrial power generation markets. The objective of the cooperative agreements granted under the program is to join the DOE with industry in research and development that will lead to commercial offerings in the private sector. The ATS will provide ultra-high efficiency, environmental superiority, and cost competitiveness. The ATS will foster (1) early market penetration that enhances the global competitiveness of US industry, (2) public health benefits resulting from reduced exhaust gas emissions of target pollutants, (3) reduced cost of power used in the energy-intensive industrial marketplace, and (4) the retention and expansion of the skilled US technology base required for the design, development and maintenance of state-of-the-art advanced turbine products. The Industrial ATS Development and Demonstration program is a multi-phased effort. Solar Turbines Incorporated (Solar) has participated in Phases 1 and 2 of the program. On September 14, 1995 Solar was awarded a Cooperative Agreement for Phases 3 and 4 of the program. Phase 3 of the work is separated into two subphases: Phase 3A entails Component Design and Development; Phase 3B will involve Integrated Subsystem Testing. Phase 4 will cover Host Site Testing. As of the end of the reporting period work on the program is 29.1% complete (24.7% last quarter). Work on the Mercury 50 development and ATS technology development portions of the program (WBS 10000 et seq) is 48.9% complete (41.6% last quarter). Estimates of percent complete are based upon milestones completed. In order to maintain objectivity in assessing schedule progress, Solar uses a 0/100 percent complete assumption for milestones rather than subjectively estimating progress toward completion of milestones. Cost and schedule variance information is provided in Section 4.0 Program Management.

  8. Valve development for coal gasification plants: Phase I to Phase II transition. Quarterly technical program report, May--July 1978

    Energy Technology Data Exchange (ETDEWEB)

    Bellezza, D.

    1978-08-01

    This is the eighth in a series of Quarterly Technical Progress Reports relating to the Valve Development for Coal Gasification Plants Program. This document discusses engineering progress during the period of May to July 1978. The work described herein represents a continuation of the Phase I seat development effort for the Task III valve and the continuation of design engineering effort, necessary to prepare detail manufacturing drawings for use in the production of prototype valves during Phase II of this program. Work performed during this quarter consists of: valve design, thermal and stress analysis of valves, design detailing and specifications, quality assurance planning and various tests as outlined.

  9. Valve development for coal gasification plants. Phase II (Draft). Quarterly technical program report, October--December 1978

    Energy Technology Data Exchange (ETDEWEB)

    Bellezza, D.

    1979-01-01

    This is the tenth in a series of Quarterly Technical Progress Reports relating to the Valve Development for Coal Gasification Plants Program. This document discusses engineering progress during the period of October to December 1978. Work performed is discussed briefly. (LTN)

  10. Power systems development facility. Quarterly technical progress report, July 1--September 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    This quarterly technical progress report summarizes work completed during the Second Quarter of the Second Budget Period, July 1 through September 30, 1993, under the Department of Energy (DOE) Cooperative Agreement No. DE-FC21-90MC25140 entitled ``Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.`` The objective of this project is to evaluate hot gas particle control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device issues to be addressed include the integration of the particulate control devices into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scaleup of particulate control systems to commercial size. The conceptual design of the facility was extended to include a within scope, phased expansion of the existing Hot Gas Cleanup Test Facility Cooperative Agreement to also address systems integration issues of hot particulate removal in advanced coal-based power generation systems. This expansion included the consideration of the following modules at the test facility in addition to the existing Transport Reactor gas source and Hot Gas Cleanup Units: Carbonizer/Pressurized Circulating Fluidized Bed Gas Source. Hot Gas Cleanup Units to mate to all gas streams; Combustion Gas Turbine; and Fuel Cell and associated gas treatment. This expansion to the Hot Gas Cleanup Test Facility is herein referred to as the Power Systems Development Facility (PSDF). The major emphasis during this reporting period was continuing the detailed design of the facility.

  11. Targeting GIRK Channels for the Development of New Therapeutic Agents

    Directory of Open Access Journals (Sweden)

    Kenneth eWalsh

    2011-10-01

    Full Text Available G protein-coupled inward rectifier K+ (GIRK channels represent novel targets for the development of new therapeutic agents. GIRK channels are activated by a large number of G protein-coupled receptors (GPCRs and regulate the electrical activity of neurons, cardiac myocytes and β-pancreatic cells. Abnormalities in GIRK channel function have been implicated in the patho-physiology of neuropathic pain, drug addiction, cardiac arrhythmias and other disorders. However, the pharmacology of these channels remains largely unexplored. In this paper we describe the development of a screening assay for identifying new modulators of neuronal and cardiac GIRK channels. Pituitary (AtT20 and cardiac (HL-1 cell lines expressing GIRK channels were cultured in 96-well plates, loaded with oxonol membrane potential-sensitive dyes and measured using a fluorescent imaging plate reader. Activation of the endogenous GPCRs in the cells caused a rapid, time-dependent decrease in the fluorescent signal; indicative of K+ efflux through the GIRK channels (GPCR stimulation versus control, Z’-factor = 0.5-0.7. As expected this signal was inhibited by addition of Ba2+ and the GIRK channel toxin tertiapin-Q. To test the utility of the assay for screening GIRK channel blockers, cells were incubated for 5 minutes with a compound library of Na+ and K+ channel modulators. Ion transporter inhibitors such as 5-(N,N-hexamethylene-amiloride and SCH-28080 were identified as blockers of the GIRK channel at sub-micromolar concentrations. Thus, the screening assay will be useful for expanding the limited pharmacology of the GIRK channel and in developing new agents for the treatment of GIRK channelopathies.

  12. Ion channel expression in the developing enteric nervous system.

    Directory of Open Access Journals (Sweden)

    Caroline S Hirst

    Full Text Available The enteric nervous system arises from neural crest-derived cells (ENCCs that migrate caudally along the embryonic gut. The expression of ion channels by ENCCs in embryonic mice was investigated using a PCR-based array, RT-PCR and immunohistochemistry. Many ion channels, including chloride, calcium, potassium and sodium channels were already expressed by ENCCs at E11.5. There was an increase in the expression of numerous ion channel genes between E11.5 and E14.5, which coincides with ENCC migration and the first extension of neurites by enteric neurons. Previous studies have shown that a variety of ion channels regulates neurite extension and migration of many cell types. Pharmacological inhibition of a range of chloride or calcium channels had no effect on ENCC migration in cultured explants or neuritogenesis in vitro. The non-selective potassium channel inhibitors, TEA and 4-AP, retarded ENCC migration and neuritogenesis, but only at concentrations that also resulted in cell death. In summary, a large range of ion channels is expressed while ENCCs are colonizing the gut, but we found no evidence that ENCC migration or neuritogenesis requires chloride, calcium or potassium channel activity. Many of the ion channels are likely to be involved in the development of electrical excitability of enteric neurons.

  13. Ion Channel Expression in the Developing Enteric Nervous System

    Science.gov (United States)

    Stamp, Lincon A.; Fegan, Emily; Dent, Stephan; Cooper, Edward C.; Lomax, Alan E.; Anderson, Colin R.; Bornstein, Joel C.; Young, Heather M.; McKeown, Sonja J.

    2015-01-01

    The enteric nervous system arises from neural crest-derived cells (ENCCs) that migrate caudally along the embryonic gut. The expression of ion channels by ENCCs in embryonic mice was investigated using a PCR-based array, RT-PCR and immunohistochemistry. Many ion channels, including chloride, calcium, potassium and sodium channels were already expressed by ENCCs at E11.5. There was an increase in the expression of numerous ion channel genes between E11.5 and E14.5, which coincides with ENCC migration and the first extension of neurites by enteric neurons. Previous studies have shown that a variety of ion channels regulates neurite extension and migration of many cell types. Pharmacological inhibition of a range of chloride or calcium channels had no effect on ENCC migration in cultured explants or neuritogenesis in vitro. The non-selective potassium channel inhibitors, TEA and 4-AP, retarded ENCC migration and neuritogenesis, but only at concentrations that also resulted in cell death. In summary, a large range of ion channels is expressed while ENCCs are colonizing the gut, but we found no evidence that ENCC migration or neuritogenesis requires chloride, calcium or potassium channel activity. Many of the ion channels are likely to be involved in the development of electrical excitability of enteric neurons. PMID:25798587

  14. Biomass power for rural development. Quarterly report, January 1, 1997--April 1, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, J.T.

    1997-05-01

    The following information summarizes the major areas of project activities accomplished during the last quarter. Activities addressing conversion technology have been geared towards gathering information and drawing comparisons to specific project need. Of major benefit was the trip taken to Denmark by Project Manager, Edward Woolsey. The first section of this report provides an overview of his experiences and findings. As a follow up to this trip, representatives from Iowa State University and from IES Utilities will also visit some of these facilities. Their information will be included in the next report. At the supply development level, the RC&D has been working to identify and organize producers of swithgrass. A major accomplishment has been the formation of the Prairie Lands Bio-Products group. This association will explore different business structures that energy crop producers can use to supply biomass and to effectively market their materials to the energy industry. Thus, the group will begin to interact with IES in the next few months to determine how the supplier and the utility must interact to establish a working relationship and to efficiently provide biomass as a boiler fuel. Other major areas of focus for the group will be the development and implementation of risk management strategies to overcome income loss and allow acreage increases during market development. These strategies include the development of niche markets for swithgrass, the use of CRP lands, and outside sources of cost share for establishment.

  15. Engineering development of advanced physical fine coal cleaning for premium fuel applications. Quarterly report, April 1--June 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Moro, N.; Shields, G.L.; Smit, F.J.; Jha, M.C.

    1997-12-31

    The primary goal of this project is the engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. The project scope includes laboratory research and bench-scale testing on six coals to optimize these processes, followed by the design, construction, and operation of a 2 t/hr process development unit (PDU). Accomplishments during the quarter are described on the following tasks and subtasks: Development of near-term applications (engineering development and dewatering studies); Engineering development of selective agglomeration (bench-scale testing and process scale-up); PDU and advanced column flotation module (coal selection and procurement and advanced flotation topical report); Selective agglomeration module (module operation and clean coal production with Hiawatha, Taggart, and Indiana 7 coals); Disposition of the PDU; and Project final report. Plans for next quarter are discussed and agglomeration results of the three tested coals are presented.

  16. Atlantic Richfield Hanford Company process technology and process development. Quarterly report, April 1977--June 1977

    Energy Technology Data Exchange (ETDEWEB)

    1977-08-01

    This quarterly report is the fifth in a series intended to provide information on research and engineering activities being performed to improve the processing of irradiated reactor fuels, the production of plutonium, and the management of resultant chemical wastes.

  17. Practical superconductor development for electrical applications - quarterly report for the period ending June 30, 2002.

    Energy Technology Data Exchange (ETDEWEB)

    Dorris, S. E.

    2002-09-17

    This is a multiyear experimental research program that focuses on improving relevant material properties of high-T{sub c} superconductors (HTSs) and developing fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of the Argonne National Laboratory (ANL) program. The technical highlights from this quarter are that the capabilities and performance of a new pulsed laser deposition system (PLD2) are described. Using PLD2, a YBa{sub 2}Cu{sub 3}O{sub x} (YBCO) film with critical current density (J{sub c}) of 5.3 MA/cm{sup 2} was prepared on single-crystal SrTiO{sub 3} (STO). Study of a RABiTS{trademark} sample from Oak Ridge National Laboratory showed new effects of magnetic history on grain boundary transport in YBCO. The critical current (I{sub c}) of melt-textured YBCO rings was measured under pulsed current conditions.

  18. Development of a Refined Quarter Car Model for the Analysis of Discomfort due to Vibration

    Directory of Open Access Journals (Sweden)

    A. N. Thite

    2012-01-01

    Full Text Available In the automotive industry, numerous expensive and time-consuming trials are used to “optimize” the ride and handling performance. Ideally, a reliable virtual prototype is a solution. The practical usage of a model is linked and restricted by the model complexity and reliability. The object of this study is development and analysis of a refined quarter car suspension model, which includes the effect of series stiffness, to estimate the response at higher frequencies; resulting Maxwell's model representation does not allow straightforward calculation of performance parameters. Governing equations of motion are manipulated to calculate the effective stiffness and damping values. State space model is arranged in a novel form to find eigenvalues, which is a unique contribution. Analysis shows the influence of suspension damping and series stiffness on natural frequencies and regions of reduced vibration response. Increase in the suspension damping coefficient beyond optimum values was found to reduce the modal damping and increase the natural frequencies. Instead of carrying out trial simulations during performance optimization for human comfort, an expression is developed for corresponding suspension damping coefficient. The analysis clearly shows the influence of the series stiffness on suspension dynamics and necessity to incorporate the model in performance predictions.

  19. Numerical Investigation of Developing Velocity Distributions in Open Channel Flows

    Directory of Open Access Journals (Sweden)

    Usman Ghani

    2014-04-01

    Full Text Available The velocity profiles in open channel flows start developing after entering into the channel for quite some length. All types of laboratory experiments for open channel flows are carried out in the fully developed flow regions which exist at some length downstream the inlet. In this research work an attempt has been made to investigate the impact of roughness and slope of the channel bed on the length required for establishment of fully developed flow in an open channel. A range of different roughness values along with various slopes were considered for this purpose. It was observed that an increase in roughness results in reduction of development length; and development length reduces drastically when roughness reaches to the range normally encountered in open channel flows with emergent vegetation or natural river flows. However, it was observed that the change of slope did not have any noticeable effect on development length. This work suggests that CFD (Computational Fluid Dynamics technique can be used for getting a reliable development length before performing an experimental work

  20. Advanced Turbine Systems Program: Conceptual design and product development. Quarterly report, February--April 1994

    Energy Technology Data Exchange (ETDEWEB)

    Benjamin, G.J.

    1994-06-01

    Objective (Phase II) is to develop an industrial gas turbine system to operate at a thermal efficiency of 50% (ATS50) with efficiency enhancements to be added as they become possible. During this quarter, Solar`s engine design team has refined both the 1- and 2-spool cycle concepts, to determine sensitivity to key component efficiencies, cooling air usage and origin, and location of compressor surge lines. The refined analysis included more detailed component work such as compressor and turbine design; different speed trade-offs for the low-and high-pressure compressor in the 1-spool configuration were examined for the best overall compressor efficiency. High-temperature and creep testing of recuperator candidate materials continued. Creep, yield, and proportional limit were measured for foil thicknesses 0.0030--0.0050 for Type 347 ss, Inconel 625, and Haynes 230. Combustor design work included preliminary layout of a multi-can annular combustor integrated into the main engine layout. During the subscale catalytic combustion rig testing, NOx emissions < 5 ppmv were measured. Integration of the engine concept designs into the full power plant system designs has started.

  1. 国际油价2012年一季度走势回顾与二季度展望%First Quarter Development Trends Review and Second Quarter Prediction of International Oil Price in 2012

    Institute of Scientific and Technical Information of China (English)

    杨晨

    2012-01-01

    In the first quarter of 2012, international oil price continuously rose with fluctuation and stood at a new price level. The article analyzes the factors influencing the development trends of international oil price in the first quarter as well as their characteristics. Synthesizing every main factor influencing international oil price in tne second quarter, it forecasts its possible development trends.%2012年一季度,国际油价继续震荡走高,并站上新的价格水平。分析了影响一季度油价走势的因素及其特点,综合二季度国际油价的各主要影响因素,预测了其可能的变化趋势。

  2. High-energy gas-fracturing development. Quarterly report, October-December 1982

    Energy Technology Data Exchange (ETDEWEB)

    Cuderman, J.F.

    1983-02-01

    The purpose of this study is to develop and optimize the High Energy Gas Fracturing (HEGF) technique to produce multiple fractures around a wellbore in order to stimulate natural-gas production in Devonian shale. The HEGF technique uses a wellbore charge of a propellant tailored to produce pressure loading in the borehole that avoids crushing yet produces multiple fractures radiating from the wellbore. The multiple-fracture regime has been characterized and releated to parameters such as borehole size, pressure risetime, and surface-wave velocity. Pressure risetimes and peak pressures, measured for different propellants in boreholes to specify a propellant for a desired peak pressure and pressure risetime. Semiempirical models, using results from previous experiments, successfully relate stress, acceleration, and fracture radii in surrounding rock to peak pressure and pressure risetime. A finite-element model also has been developed which predicts fracture type and direction of fractures as a function of pressure loading, in situ stress, and material properties. A full-scale HEGF system has been developed for application in gas-well-stimulation experiments in Devonian shale. During this quarter, a proof test of the full-scale HEGF was conducted at the Nevada Test Site (NTS). The designed pressure pulse of 0.5 ms risetime was achieved, and the tamp remained in place during the test. The borehole was successfully cleared posttest. Multiple fracturing was verified with a downhole TV camera. The test of the full-scale hardware and its operational capability was successful. As a result, the HEGF system is ready for application in gas-well-stimulation experiments in Devonian shale. Tests were conducted to determine worst-case accident scenarios to establish sensitivity to shock and fire. There appears to be no risk of initiation resulting from shock or breakage of the propellant-canister segments.

  3. Comparing export marketing channels : developed versus developing countries

    NARCIS (Netherlands)

    Tesfom, G; Lutz, C; Ghauri, P

    2004-01-01

    The article presents a qualitative model, derived from the transaction cost and resource dependence theory, to compare the business relationships in the marketing channels between footwear buyers in The Netherlands and Uganda, and their suppliers. The observed business relationships are used to desi

  4. Power systems development facility. Quarterly technical progress report, January 1, 1994--March 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    This quarterly technical progress report summarizes work completed during the last quarter of the Second Budget Period, January 1 through March 31, 1994, entitled {open_quotes}Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion.{close_quotes} The objective of this project is to evaluate hot gas particulate control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device issues to be addressed include the integration of the particulate control devices into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scale-up of particulate control systems to commercial size.

  5. Quarterly report April 1 - June 30, 1997 [ARPA TRP turboalternator development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-12

    This is a quarterly report of CALSTART's progress with their programs. Their overall objectives remain: (1) efficiently and responsible management of the program and; (2) assist in the commercialization of the technology by doing the following: identifying potential strategic partners; explaining need and value of turbogenerator; reach important audiences for AlliedSignal; showcase technology at key conferences/briefings; raise technology profile via custom Web information; and extend AlliedSignal turbogenerator outreach efforts.

  6. Horticultural marketing channels in Kenya: Structure and development.

    NARCIS (Netherlands)

    Dijkstra, T.

    1997-01-01

    This study analyses the structure and development of horticultural marketing channels in Kenya. It is based primarily on a farm survey among some 500 farmers in Nyandarua, Kisii and Taita Taveta Districts and a trade survey of about 750 horticultural traders in 18 different market places. The survey

  7. Advanced research and technology development fossil energy materials program. Quarterly progress report for the period ending September 30, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, R.A. (comp.)

    1981-12-01

    This is the fourth combined quarterly progress report for those projects that are part of the Advanced Research and Technology Development Fossil Energy Materials Program. The objective is to conduct a program of research and development on materials for fossil energy applications with a focus on the longer-term and generic needs of the various fossil fuel technologies. The program includes research aimed toward a better understanding of materials behavior in fossil energy environments and the development of new materials capable of substantial enhancement of plant operations and reliability. Work performed on the program generally falls into the Applied Research and Exploratory Development categories as defined in the DOE Technology Base Review, although basic research and engineering development are also conducted. A substantial portion of the work on the AR and TD Fossil Energy Materials Program is performed by participating cntractor organizations. All subcontractor work is monitored by Program staff members at ORNL and Argonne National Laboratory. This report is organized in accordance with a work breakdown structure defined in the AR and TD Fossil Energy Materials Program Plan for FY 1981 in which projects are organized according to fossil energy technologies. We hope this series of AR and TD Fossil Energy Materials Program quarterly progress reports will aid in the dissemination of information developed on the program.

  8. Development of molten carbonate fuel cell power plant. Quarterly technical progress report, February 1-April 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, J. R.

    1980-01-01

    Work has been initiated during this first quarter under all four program tasks and by all major participants as described. Task 1.0 activity (establish power plant reference design) concentrated upon definition of user requirements and establishment of power plant subsystem alternatives and characteristics. Task 2.0 work (stack and cell design development and verification) was initiated with a heavy emphasis upon test facilities preparation. A total of 27 laboratory cells were operated during this reporting period and a total of nine cells continued on test at the end of the quarter. Investigation of alternative anode and cathode materials proceeded; a dual-porosity anode was fabricated and tested. Over 10,000 endurance hours on a state-of-the-art cell carried-over from a previous program has been achieved and 1500 hours endurance has been obtained with sheet metal cells. Results presented for electrolyte structure development include comparative data for spray-dried and modified aqueous slurry process powders. Shake-down tests with a rotating disc electrode apparatus for fundamental measurements are described. Concept designs for both prototype and subscale stacks have been identified. Task 3.0 effort (development capability for full-scale stack tests) included preparation of an overall test plan to commercialization for molten carbonate fuel cells and of a functional specification for the tenth-scale stack test facility; drafts of both documents were completed for internal review. Cost-effective manufacturing assessment of available designs and processes was initiated. Task 4.0 work (develop capabilities for operation of stacks on coal-derived gas) included gathering of available contaminants concentration and effects information and preparation of initial projections of contaminant ranges and concentrations. Accomplishments to date and activities planned for the next quarter are described.

  9. Development of a real-time monitor for airborne alpha emissions. First quarter report, TTP AL 142003

    Energy Technology Data Exchange (ETDEWEB)

    Gritzo, R.E.; Fowler, M.M.

    1994-02-01

    This is the first quarterly report for Fiscal Year (FY) 1994 for TTP AL 142003, Development of a Real-Time Monitor for Airborne Alpha Emissions. Los Alamos National Laboratory (LANL) is developing a new technology for on-line, real-time monitoring of incinerator stacks for low levels of airborne alpha activity. While initially developed for incinerators, this new technology may well find other applications in continuous air monitoring, process monitoring, and monitoring during remediation activities. Referred to as the Large-Volume Flow Thru Detector System (LVFTDS), this technology responds directly to the need for fast responding, high sensitivity effluent monitoring systems. With DOE EM-50 funding, LANL has fabricated a bench-top proof of concept detector system and is conducting tests to evaluate its performance. A second- generation prototype is being designed, based on requirements driven by potential field test sites. An industrial partner is being solicited to license the technology. Field trials of a full-scale detector system are planned for FY 95. Accomplishments during the first quarter of FY 94 are chronicled in this report, including budgetary data. A schedule for the remainder of the fiscal year is also provided.

  10. Research and development for the declassification productivity initiative. Quarterly report, January 1997--August 1997

    Energy Technology Data Exchange (ETDEWEB)

    Bessonet, C.G. de

    1997-03-05

    The highlight for the first quarter was the presentation of research progress and findings at the DPI Symposium on March 5, 1997. Since that presentation, additional progress was slowed down due to the decreased budget funding for year two, and consequently, the decrease in time-effort of the principal investigators. This report summarizes the progress in each of the topical areas to date. A research article has been prepared for publication for the Optical Character Recognition project; two progress reports are included for the Logical Analysis project; and two progress reports for the Knowledge Representation project. Research activities for the Tipster Technology project will resume this fall.

  11. Sustainable development in the Gruenau-Werdwies quarter, Zurich; Nachhaltige Quartierentwicklung Gruenau-Werdwies Zuerich; Auswirkungen der Ersatzneubauten Bernerstrasse Werdwies - Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Jenny, A.; Ott, W.

    2009-12-15

    This comprehensive final report for the Swiss Federal Office of Energy (SFOE) examines the effects of new, replacement residential buildings in the Bernerstrasse in Zurich, Switzerland. The authors state that this replacement development project is exemplary for sustainable residential development, incorporating ecological solutions for building and mobility, addressing financial and social aspects and allowing resident participation. The report includes the results of surveys made among the residents of the area and compares the Werdwies quarter with the whole area's social structures and mobility aspects. The quarter's energy consumption is discussed on the basis of a result checking survey. Finally, the findings of the project are discussed.

  12. Quarterly Technical Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Ayman I. Hawari

    2002-12-30

    This report presents the progress made during the first quarter of phase 2 for the project entitled ''Development and Validation of Thermal Neutron Scattering Laws from Applications and Safety Implications in Generation IV Reactor Designs.'' (B204) THIS IS NOT A FINAL REPORT

  13. Progress in Development of Improved Ion-Channel Biosensors

    Science.gov (United States)

    Nadeau, Jay L.; White, Victor E.; Maurer, Joshua A.; Dougherty, Dennis A.

    2008-01-01

    Further improvements have recently been made in the development of the devices described in Improved Ion-Channel Biosensors (NPO-30710), NASA Tech Briefs, Vol. 28, No. 10 (October 2004), page 30. As discussed in more detail in that article, these sensors offer advantages of greater stability, greater lifetime, and individual electrical addressability, relative to prior ion-channel biosensors. In order to give meaning to a brief description of the recent improvements, it is necessary to recapitulate a substantial portion of the text of the cited previous article. The figure depicts one sensor that incorporates the recent improvements, and can be helpful in understanding the recapitulated text, which follows: These sensors are microfabricated from silicon and other materials compatible with silicon. Typically, the sensors are fabricated in arrays in silicon wafers on glass plates. Each sensor in the array can be individually electrically addressed, without interference with its neighbors. Each sensor includes a well covered by a thin layer of silicon nitride, in which is made a pinhole for the formation of a lipid bilayer membrane. In one stage of fabrication, the lower half of the well is filled with agarose, which is allowed to harden. Then the upper half of the well is filled with a liquid electrolyte (which thereafter remains liquid) and a lipid bilayer is painted over the pinhole. The liquid contains a protein that forms an ion channel on top of the hardened agarose. The combination of enclosure in the well and support by the hardened agarose provides the stability needed to keep the membrane functional for times as long as days or even weeks. An electrode above the well, another electrode below the well, and all the materials between the electrodes together constitute a capacitor. What is measured is the capacitive transient current in response to an applied voltage pulse. One notable feature of this sensor, in comparison with prior such sensors, is a

  14. The Copper Substrate Developments for the HIE-ISOLDE High-Beta Quarter Wave Resonator

    CERN Document Server

    Alberty, L; Aviles, I; Calatroni, S; Capatina, O; Foffano, G; Kadi, Y; Moyret, P; Schirm, K-M; Tardy, T; Venturini Delsolaro, W; D'Elia, A

    2013-01-01

    A new Linac using superconducting Quarter-Wave Resonators (QWRs) is under construction at CERN in the framework of the HIE-ISOLDE project. The QWRs are made by niobium sputtered on a bulk copper substrate. The working frequency at 4.5 K is 101.28 MHz and they will provide 6 MV/m accelerating gradient on the beam axis with a total maximum power dissipation of 10 W. The properties of the cavity substrate have a direct impact on the final cavity performance. The copper substrate has to ensure an optimum surface for the niobium sputtered layer. It has also to fulfil the required geometrical tolerances, the mechanical stability during operation and the thermal performance to optimally extract the RF dissipated power on cavity walls. The paper presents the mechanical design of the high β cavities. The procurement process of the copper raw material is detailed, including specifications and tests. The manufacturing sequence of the complete cavity is then explained and the structural and thermo-mechanical behaviour...

  15. Development of a surface micromachined spiral-channel viscous pump

    Science.gov (United States)

    Kilani, Mohammad Ibrahim

    This work introduces a new pump, called the spiral pump, which targets the surface micromachining technology. We demonstrate the possibility of realizing the spiral pump geometry in standard surface micromachining, lay out the theoretical foundation for its operation, and conduct an objective assessment for its practicality. The spiral pump is a shear-driven viscous pump, which works by rotating a disk with a spiral groove at a close proximity over a stationary plate. Fluid contained in the spiral groove between the stationary plate and the rotating disk, is subject to a net tangential viscous stress, which allows it to be transported against an imposed pressure difference. A number of spiral pumps were fabricated in 5 levels of polysilicon using Sandia's Ultraplanar Multilevel Surface Micromachining Technology, SUMMiT, and the fabricated micropump were tested in dry-run mode using electrostatic probing and optical microscopy. To achieve a more comprehensive understanding of the spiral micropump operation, an analytical model was developed for the flow field in the spiral channel of the pump using an approximation which replaces the spiral channel with an equivalent straight channel with appropriate dimensions and boundary conditions. An analytical solution for this model at the lubrication limit relates the flow rate, torque and power consumption of the spiral pump to the pressure difference and rotation rate. The model was validated using macroscale experiments conducted on a scaled up spiral pump model, which involved a quantitative characterization of the spiral pump performance. Those experiments validate the developed theory and help assess the practicality of the spiral pump concept. In addition to the spiral pump, two positive-displacement ring-gear pumps were designed and fabricated in this work. The feasibility of surface micromachined ring-gear pumps is briefly investigated in this work, and compare to that of the spiral micropump.

  16. EDIN-USVI Clean Energy Quarterly: Volume 1, Issue 2, March 2011, Energy Development in Island Nations, U.S. Virgin Islands (Newsletter)

    Energy Technology Data Exchange (ETDEWEB)

    2011-03-01

    This quarterly newsletter provides timely news and information about the plans and progress of the Energy Development in Island Nations U.S. Virgin Islands pilot project, including significant events and milestones, work undertaken by each of the five working groups, and project-related renewable energy and energy efficiency projects.

  17. DEVELOPING A COUNTERMEASURES TO USING COVERT CHANNELS IN PACKET-SWITCHED NETWORKS

    Directory of Open Access Journals (Sweden)

    Nazarov I. V.

    2014-05-01

    Full Text Available In the given article a model which allows defining general characteristics of covert channels in packet-switched networks as well as countermeasures to covert channels developed on the basis of the model in question are presented

  18. Development of Channeled Flow in Partially Molten Medium

    Science.gov (United States)

    Takashima, S.; Kumagai, I.; Kurita, K.

    2002-12-01

    broken in the situation. Analogous experiments suggest that when heterogeneous distribution of the liquid phase is induced, the flow in the region of higher liquid fraction breaks its structure, fluidization occurs, and channeled flow is developed. The motions of the gel and the liquid phase are determined independently by PIV/PTV techniques to examine the condition of development of the channeled flow.

  19. Alloy development for irradiation performance. Quarterly progress report for period ending December 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1981-04-01

    Progress is reported in eight sections: analysis and evaluation studies, test matrices and test methods development, Path A Alloy Development (austenitic stainless steels), Path C Alloy Development (Ti and V alloys), Path D Alloy Development (Fe alloys), Path E Alloy Development (ferritic steels), irradiation experiments and materials inventory, and materials compatibility and hydrogen permeation studies. (DLC)

  20. Geothermal Drilling and Completion Technology Development Program. Quarterly progress report, October 1980-December 1980

    Energy Technology Data Exchange (ETDEWEB)

    Kelsey, J.R. (ed.)

    1981-03-01

    The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods. Advanced drilling systems are also under development.

  1. Geothermal drilling and completion technology development program. Quarterly progress report, April-June 1980

    Energy Technology Data Exchange (ETDEWEB)

    Varnado, S.G.

    1980-07-01

    The progress, status, and results of ongoing research and development (R and D) within the Geothermal Drilling and Completion Technology Development Program are reported. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1983 and by 50% by 1987.

  2. Geothermal Drilling and Completion Technology Development Program. Quarterly progress report, January 1981-March 1981

    Energy Technology Data Exchange (ETDEWEB)

    Kelsey, J.R. (ed.)

    1981-06-01

    The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods as they apply to advanced drilling systems.

  3. Statistical development and validation of discharge equations for natural channels

    Science.gov (United States)

    Dingman, S. Lawrence; Sharma, Keshav P.

    1997-12-01

    Although the Manning equation is widely accepted as the empirical flow law for rough turbulent open-channel flow, using the equation in practical situations such as slope-area computations is fraught with uncertainty because of the difficulty in specifying the value of the reach resistance, Manning's n. Riggs (1976, J. Res. US Geol. Surv., 4: 285-291) found that n was correlated with water-surface slope, and proposed a multiple-regression equation that obviates the need for estimating n in slope-area estimates of discharge. Because his relation was developed from a relatively small sample ( N = 62), had potential flaws owing to multicollinearity, and was not thoroughly validated, we used an expanded data base ( N = 520) and objective methods to develop a new relation for the same purpose: Q = 1.564 A1.173R0.400S-0.0543log S where Q is discharge (m 3 s -1), A is cross-sectional area (m 2), R is hydraulic radius (m), and S is water-surface slope. We validated Rigg's model and our model using 100 measurements not included in model development and found that both give similar results. Riggs's model is somewhat better in terms of actual (m 3 s -1) error, but ours is better in terms of relative (log Q) error. We conclude that either Riggs's or our model can be used in place of Manning's equation in slope-area computations, but that our model is preferable because it has less bias, minimizes multicollinearity, and performs better when applied to discharge changes in individual reaches. We also found that our model performs better than those of Jarrett (1984, J. Hydraul. Eng., 110: 1519-1539) or Riggs in the range of applicability of Jarrett's equation (0.15 m ≤ R ≤ 2.13 m; 0.002 ≤ S ≤ 0.052). Both Riggs's and our models significantly overestimate Q in flows satisfying both the following conditions: Q < 3 m 3s -1 and Froude number less than 0.2. For other in-bank flows in relatively straight reaches, our model can be recommended for use in slope-area computations

  4. Aggravation of north channels' shrinkage and south channels' development in the Yangtze Estuary under dam-induced runoff discharge flattening

    Science.gov (United States)

    Zhu, Bo-yuan; Li, Yi-tian; Yue, Yao; Yang, Yun-ping

    2017-03-01

    Construction of dams on rivers has progressively affected the seasonal variability of runoff discharge, which has consequently produced remarkable impacts on the morphology of estuarine channels. This paper considers four-typical-order bifurcations of the Yangtze Estuary and adopts an ebb partition ratio (defined as the diversion ratio of ebb flow in a given branch divided by the total ebb tidal discharge immediately upstream of the river node where the bifurcation occurs) as a measure of water excavating force in the bifurcation channels. Results show that the seasonal variability of runoff discharge at Datong Hydrological Station (Datong) is flattened, being mainly driven by upstream runoff flattening observed at Yichang Hydrological Station (Yichang) and the tributary rivers. Yearly ebb partition ratios of the channels located to the north and south of the islands present decreasing and increasing trends respectively, and as also do the yearly north and south channel volume of the bifurcations. Yearly ebb partition ratio is proved to be an effective index to represent the water excavating force considering the stability of yearly ebb tidal discharge and its relationship with the channel erosion-deposition. River dams are the driving factors behind the runoff flattening at Datong because of their flattening effects on its main contributors (Yichang and tributary rivers). This flattening significantly helps reduce and enlarge the yearly ebb partition ratios of the north and south channels respectively, and then aggravates the shrinkage and development of the north and south channels separately. Yearly ebb partition ratio of the North Passage (NP) must be enlarged in order for the NP to maintain its function as a shipping channel.

  5. Advanced turbine systems program conceptual design and product development: Quarterly report, November 1993--January 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    This report describes progress made in the advanced turbine systems program conceptual design and product development. The topics of the report include selection of the Allison GFATS, castcool technology development for industrial engines test plan and schedule, code development and background gathering phase for the ultra low NOx combustion technology task, active turbine clearance task, and water vapor/air mixture cooling of turbine vanes task.

  6. Practical superconductor development for electrical power applications quarterly report for the period ending September 30, 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-11-09

    This is a multiyear experimental research program that focuses on improving relevant material properties of high-T{sub c} superconductors (HTSs) and developing fabrication methods that can be transferred to industry for production of commercial conductors. A key element of this Argonne National Laboratory (ANL) program is the development of teaming relationships with industrial partners in the areas of conductor development and prototype electric power system product demonstration.

  7. Obstacles to Development of Marketing Channels of Agricultural Products in China and Countermeasures

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    This paper introduces the connotation of marketing channels of agricultural products, and gives an overall of current modes of marketing channels of agricultural products in China, including the marketing channel of transportation and sale of agricultural products, the marketing channel of intermediary sales agent, and the marketing channel of mutual cooperation. The problems existing in the marketing channel of agricultural products in China as follows: first, the cost is high; second, the technological content is low; third, the upstream main body lacks competitiveness; fourth, the structure of investment is irrational. Corresponding countermeasures are put forward to develop marketing channels of agricultural products as follows: perfect the service function of wholesale market of agricultural products; propel the construction of integration and expansion of wholesale market; develop the circulation cooperatives of agricultural products; develop the integrated organization of production and sales of agricultural products.

  8. Practical superconductor development for electrical power applications. Quarterly report for the period ending June 30, 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-21

    This is a multiyear experimental research program focused on improving relevant material properties of high-{Tc} superconductors (HTSs) and on development of fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of the Argonne (ANL) program.

  9. Practical superconductor development for electrical power applications - quarterly report for the period ending Dec. 31, 2003.

    Energy Technology Data Exchange (ETDEWEB)

    Dorris, S. E.

    2004-03-02

    This is a multiyear experimental research program that focuses on improving relevant material properties of high-critical temperature (Tc) superconductors and developing fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of the Argonne National Laboratory (ANL) program.

  10. Practical superconductor development for electrical power applications - quarterly report for the period ending March 31, 2004.

    Energy Technology Data Exchange (ETDEWEB)

    Dorris, S. E.

    2004-07-21

    This is a multiyear experimental research program that focuses on improving relevant material properties of high-critical-temperature (Tc) superconductors and developing fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of the Argonne National Laboratory (ANL) program.

  11. Practical superconductor development for electrical power applications - quarterly report for the period ending June 30, 2004.

    Energy Technology Data Exchange (ETDEWEB)

    Dorris, S. E.

    2004-09-09

    This is a multiyear experimental research program that focuses on improving relevant material properties of high-critical-temperature (Tc) superconductors and developing fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of the Argonne National Laboratory (ANL) program.

  12. HTGR fuel recycle development program. Quarterly progress report for the period ending August 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    1978-09-01

    The work reported includes the development of unit processes and equipment for reprocessing of High-Temperature Gas-Cooled Reactor (HTGR) fuel, the design and development of an integrated pilot line to demonstrate the head end of HTGR reprocessing using unirradiated fuel materials, and design work in support of Hot Engineering Tests (HET). Work is also described on tradeoff studies concerning the required design of facilities and equipment for the large-scale recycle of HTGR fuels in order to guide the development activities for HTGR fuel recycle.

  13. Practical superconductor development for electrical power applications: Quarterly report for the period ending December 31, 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-02-02

    This is a multiyear experimental research program focused on improving relevant material properties of high-T{sub c} superconductors (HTSS) and on development of fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of the Argonne (ANL) program. Recent results on substrate deposition for coated conductors, vortex studies, development of hardened Ag-alloy sheaths for powder-in-tube conductors, and sol-gel processing of NdBa{sub 2}Cu{sub 3}O{sub x} (Nd-123) are presented.

  14. Practical superconductor development for electrical power applications quarterly report for the period ending March 31, 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-04-19

    This is a multiyear experimental research program focused on improving relevant material properties of high-T{sub c} superconductors (HTSs) and on development of fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of the Argonne program. Recent results are presented on YBa{sub 2}Cu{sub 3}O{sub x} (Y-123) coated conductors, sheathed (Bi,Pb){sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub x} (Bi-2223) tapes, and applications development.

  15. Alloy development for irradiation performance. Quarterly progress report for period ending March 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Ashdown, B.G. (comp.)

    1980-06-01

    This report is organized along topical lines in parallel to a Program Plan of the same title so that activities and accomplishments may be followed readily relative to that Program Plan. Thus, the work of a given laboratory may appear throughout the report. Chapters 1, 2, 8, and 9 review activities on analysis and evaluation, test methods development, status of irradiation experiments, and corrosion testing and hydrogen permeation studies, respectively. These activities relate to each of the alloy development paths. Chapters 3, 4, 5, 6, and 7 present the ongoing work on each alloy development path. The Table of Contents is annotated for the convenience of the reader.

  16. Biomass power for rural development. Quarterly report, July 3--December 4, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, J.T.

    1998-03-01

    This paper describes progress in several projects related to biomass power. These include switchgrass conversion development; switchgrass gasification development; production activities including soil studies, carbon studies, switchgrass production economics, watershed impacts, and prairie lands bio-products; information and education; and geographical information system. Attachments describe switchgrass co-firing test; switchgrass production in Iowa; cooperative agreements with ISU; Rathbun Lake watershed project; newspaper articles and information publications; Secretary of Agriculture Glickman`s visit; integration of technical aspects of switchgrass production in Iowa; and evaluation of an integrated biomass gasification/fuel cell power plant.

  17. Developing Effluent Analysis Technologies to Support Nonproliferation Initiatives, Arms Control and Nonproliferation Technologies, Third quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    Schubert, S A; Staehle, G; Alonzo, G M [eds.

    1995-01-01

    This issue provides an overview of the Effluent Research Program of the DOE Office of Research and Development, highlighting a number of representative projects within this program in support of nonproliferation initiatives. Technologies reported include portable instruments for on-site inspections, standoff detectors, fieldable, real-time instruments, field collection techniques, and ultrasensitive laboratory techniques.

  18. Development of programmable multi-channel earth resistivity system

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Hyun Ki; Choi, Jong Ho; Park, In Wha [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

    1996-12-01

    Maximum 256 channel digital-stacking automatic electrical earth resistivity meter is upgrade-developed and field-tested with two commercially available systems (OYO McOHM and ABEM Terrameter) for Schlumberger vertical sounding and dipole-dipole arrays. The results of three systems are very well coincident for several dummy resistors and Schlumberger array in field site. The developed system K-Ohm shows even more reasonable quality data in sensitive dipole-dipole array measurements in comparison with the electrical survey instruments of digital stacking type manufactured by other countries. New Important features of upgraded programmable K-Ohm system are as follows ; 1) Auto-electrode-switching control by Notebook printer port, 2) receiving signal measurement by Notebook serial port, 3) interactive automatic dipole-dipole measurement software with two apparent resistivity sections compared in one Notebook display to minimize noisy data in field, 4) auto-saved field memo at any time appending to acquired data, 5) max 500 V{sub p-p} 500 mA transmitter (measuring cycle S/W programmable), 6) low-drift sigma - delta 24 bit A/D 0.0015 % linearity error with zero-offset and full - scale gain autocalibration, 7) DC 12 v operated and TX-RX 7,000 V optical-isolated, 8) electrodes grounding auto-tested, user-oriented any array sequential programmable control software. Further study will be focused on higher power TX and stand alone TX-RX system, and micro-resistivity system for in-borehole resistivity imaging. (author). 8 refs., 9 figs.

  19. Practical superconductor development for electrical applications - quarterly report for the period ending December 31, 2002.

    Energy Technology Data Exchange (ETDEWEB)

    Dorris, S., ed.

    2003-03-24

    This is a multiyear experimental research program that focuses on improving relevant material properties of high-T{sub c} superconductors and developing fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of the Argonne National Laboratory(ANL) program. This report summarizes key results from a yearlong effort to apply Raman microscopy methods to the characterization of MBa{sub 2}Cu{sub 3}O{sub x} (MBCO, where M=Y or a rare earth element) thin films on textured substrates. Important crystallographic features and orientation relationships in coated conductors made by the inclined-substrate deposition (ISD) process are also presented.

  20. Practical superconductor development for electrical power applications - quarterly report for the period ending December 31, 2000

    Energy Technology Data Exchange (ETDEWEB)

    Goretta, K.C.

    2001-01-15

    This is a multiyear experimental research program focused on improving relevant material properties of high-T{sub c} superconductors (HTSs) and on development of fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of the Argonne National Laboratory (ANL) program. Recent results are presented on YBa{sub 2}Cu{sub 3}O{sub x} (Y-123) coated conductors, including fabrication by pulsed laser deposition (PLD) and sol-gel techniques. An approach to understanding the critical current density (J{sub c}) of grain boundaries is also presented and a technique is identified for increasing J{sub c}.

  1. Biomass power for rural development. Quarterly report, September 23, 1996--December 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, J.T.

    1997-02-01

    Goals for the biomass power for rural development include: expanded feedstock research and demonstration activities to provide soil-specific production costs and yield data, as well as better methods for harvest and transport; four thousand acres of feedstock available for fueling a commercial venture; comparison of the feasibility of gasification and cocombustion; designs for on-site switchgrass handling and feeding system; a detailed assessment of utilizing switchgrass for gasification and cocombustion to generate electricity using turbines and fuel cells.

  2. Floodplain morphology, sedimentology, and development processes of a partially alluvial channel

    Science.gov (United States)

    Thayer, James B.; Ashmore, Peter

    2016-09-01

    The floodplain morphology, sediment deposits, and development mechanisms of a partially alluvial, low-moderate energy channel flowing over a mixed gravel/cobble-till bed are investigated and compared to existing ideas of floodplain development. The findings partially support the idea of a floodplain developed through lateral accretion capped with vertically accreted sediments as predicted by the energy-based classification scheme of Nanson and Croke (1992), though oblique accretion and partial channel avulsion are also important. Channel migration consists of limited cross-valley migration and downstream meander translation. Because of low channel sinuosity, well-formed neck cutoffs are rare, and instead the channel cuts headward along the insides of confined or underdeveloped meander bends forming a localized anabranching pattern. The floodplain architecture can be divided into gravel bar and bed deposits (GB), lateral accretion deposits (LA), overbank deposits (FF), and abandoned channel deposits (FF(CH)), which are described with four alluvial facies. Owing to the limited supply of coarse and fine sediment, none of the architectural elements are particularly thick, with total floodplain thickness being < 3 m. Floodplain development for partially alluvial channels is compared within a new floodplain discrimination framework. Comparisons with common facies models of single-thread, coarse-grained channels show important differences that suggest that the floodplain deposits and formative processes described herein represent a subset of single-thread systems that may be common in partially alluvial channels, particularly in slightly sinuous, coarse-grained channels of low-moderate energy with partly confined floodplains.

  3. Biomass power for rural development. Quarterly report, January 1--April 2, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, J.T.

    1998-07-01

    During the period of January 2 to April 2, 1998, efforts revolved around the design of the switchgrass materials handling/feeding system for the co-fire test and permanent system, the development of a revised statement of work and budget for fiscal years 1998--1999 and, the continuation of farmer/land conversion, and public relations efforts. The weather continues to be a major problem with an unprecedented warm winter. Much of Iowa has had little or no frost in the ground. This lack of frost has prevented farmers from getting into their fields and harvesting switchgrass. Farmers are hesitant to drive processing equipment into unfrozen fields due to the large ruts left by the wheels. The producers group has continued to gather information and develop resources necessary to supply the switchgrass to the facility in a competitive manner. Information and contacts are starting to be gathered which will help establish a market for the dedicated biomass generated electricity. The report describes the progress in the following tasks: Switchgrass conversion development including fuel analysis and engineering; Production activities which include: soil studies, carbon studies, switchgrass production economics, and switchgrass yield improvements; Information and education; and Miscellaneous which includes legislation and regulatory activities. Appendices contain the following: Switchgrass sample analysis; Chariton Valley biomass project cooperator agreement; Soil and landscape characterization status report for switchgrass project; Agreement with Center for Global and Regional Environmental Research; A literature review of reed canarygrass utility for biomass; Prairie Lands Bio-Products, Inc. agenda; Feasibility analysis and cooperative structure for value-added switchgrass products; and Information and education efforts.

  4. 140 GHz gyrotron development program. Quarterly report No. 4, January-March 1985

    Energy Technology Data Exchange (ETDEWEB)

    Felch, K.L.; Bier, R.E.; Craig, L.J.; Fox, L.J.; Hu, G.; Huey, H.E.; Ives, R.L.; Jory, H.R.; Lopez, N.C.; Reysner, P.I.

    1986-01-01

    The objective of this program is to develop a gyrotron oscillator capable of producing 100 kW CW at 140 GHz. Further analysis of the electron guns, interaction cavity, and beam tunnel designs for the first two experimental tubes, Experimental Tube 1 and preprototype Tube 1, is presented. A window deflection tester has been built and initial deflection test results are given. The first 140 GHz gyrotron magnet has successfully passed the major points in the acceptance test. The detailed results of the magnet acceptance test are discussed. Progress concerning the fabrication of 149 GHz gyrotron components, diagnostics, and protective devices, as well as the status of Experimental Tube 1, are summarized.

  5. Cool pool development. Quarterly technical report No. 1, April-June 1979

    Energy Technology Data Exchange (ETDEWEB)

    Crowther, K.

    1979-10-15

    The Cool Pool is a passive cooling system consisting of a shaded, evaporating roof pond which thermosiphons cool water into water-filled, metal columns (culvert pipes) located within the building living space. The water in the roof pond is cooled by evaporation, convection and radiation. Because the water in the pool and downcomer is colder and denser than the water in the column a pressure difference is created and the cold water flows from the pool, through the downcomer and into the bottom of the column. The warm column water rises and flows through a connecting pipe into the pool. It is then cooled and the cycle repeats itself. The system requires no pumps. The water column absorbs heat from the building interior primarily by convection and radiation. Since the column is radiating at a significantly lower temperature than the interior walls it plays a double role in human comfort. Not only does it cool the air by convection but it provides a heat sink to which people can radiate. Since thermal radiation is important to the cooling of people, the cold water column contributes substantially to their feelings of comfort. Research on the Cool Pool system includes the following major tasks: control of biological organisms and debris in the roof pond and water cylinders; development of a heat exchanger; experimental investigation of the system's thermal performance; and development of a predictive computer simulation of the Cool Pool. Progress in these tasks is reported.

  6. Developments of advanced hot-gas desulfurization sorbents. Quarterly technical progress report, April--June 1995

    Energy Technology Data Exchange (ETDEWEB)

    Jothimurugesan, K.; Adeyiga, A.A.; Gangwal, S.K.

    1995-07-01

    The objectives of this project are to develop hot-gas cleanup sorbents for relatively lower temperature application, with emphasis on the temperature range from 343-538{degrees}C. The candidate sorbents include highly dispersed mixed metal oxides of zinc, iron, copper, cobalt and molybdenum. The specific objective in the successful preparation of H{sub 2}S absorbents will be to generate as high and as stable a surface area as possible, in order to develop suitable sorbent, that are sufficiently reactive and regenerable at the relatively lower temperatures of interest in this work. A number of formulations will be prepared and screened for testing in a 1/2-inch fixed bed reactor at high pressure (1 to 20 atm) and high temperatures using simulated coal-derived fuel-gases. Screening criteria will include, chemical reactivity, stability, and regenerability over the temperature range of 343{degrees}C (650{degrees}F) to 538{degrees}C (1000{degrees}F). Each formulation will be tested for up to 5 cycles of absorption and regeneration. To prevent sulfation, catalyst additives will be investigated, which would promote a lower ignition of the regeneration. Selected superior formulation will be tested for long term (up to least 30 cycles) durability and chemical reactivity in the reactor.

  7. Practical superconductor development for electrical power applications - quarterly report for the period ending June 30, 2003.

    Energy Technology Data Exchange (ETDEWEB)

    Dorris, S. E.

    2003-09-16

    This is a multiyear experimental research program that focuses on improving relevant material properties of high-critical temperature (T{sub c}) superconductors and developing fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of the Argonne National Laboratory (ANL) program. A transport critical current density (J{sub c}) of 1.2 x 10{sup 6} A/cm{sup 2} was measured with a sample made with the standard inclined substrate deposition (ISD) architecture. Recent results are described from a study of SrRuO{sub 3} (SRO), a potential alternative buffer layer in coated conductors made by the inclined substrate deposition (ISD) method. Basic features of Raman microscopy are also discussed, and results are presented from a detailed Raman microprobe study of a 1.25-m-long YBCO coated conductor specimen produced at Oak Ridge National Laboratory (ORNL). Strain tolerance data are presented as a function of YBCO thickness for coated conductors with the standard ISD architecture.

  8. Practical superconductor development for electrical power applications - quarterly report for the period ending March 31, 2002.

    Energy Technology Data Exchange (ETDEWEB)

    Dorris, S. E.

    2002-05-22

    This is a multiyear experimental research program that focuses on improving relevant material properties of high-T{sub c} superconductors (HTSs) and developing fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of the Argonne National Laboratory (ANL) program. Technical Highlights are the capabilities and performance of a new pulsed laser deposition system (PLD2) are described. Using PLD2, a YBa{sub 2}Cu{sub 3}O{sub x} (YBCO) film with critical current density (J{sub c}) of 5.3 MA/cm{sup 2} was prepared on single-crystal SrTiO{sub 3} (STO). Study of a RABiTS{trademark} sample from Oak Ridge National Laboratory showed new effects of magnetic history on grain boundary transport in YBCO. The critical current (I{sub c}) of melt-textured YBCO rings was measured under pulsed current conditions.

  9. Engineering development of advanced physical fine coal cleaning for premium fuel applications. Quarterly technical progress report 12, July--September 1995

    Energy Technology Data Exchange (ETDEWEB)

    Moro, N.; Shields, G.L.; Smit, F.J.; Jha, M.C.

    1995-10-31

    The primary goal of this project is the engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. The project scope includes laboratory research and bench-scale testing on six coals to optimize these processes, followed by design, and construction and operation of a 2-t/hr process development unit. The project began in October, 1992, and is scheduled for completion by June, 1997. During Quarter 12 (July--September 1995), work continued on the Subtask 3.2 in-plant testing of the Microcel{trademark} flotation column at Lady Dunn. Under Subtask 4.4, additional toxic trace element analysis of column flotation samples finalized the data set. Data analysis indicates that reasonably good mass balances were achieved for most elements. The final Subtask 6.3 Selective Agglomeration Process Optimization topical report was issued this quarter. Preliminary Subtask 6.4 work investigating coal-water-fuel slurry formulation indicated that selective agglomeration products formulate slurries with lower viscosities than advanced flotation products. Work continued on Subtask 6.5 agglomeration bench-scale testing. Results indicate that a 2 lb ash/MBtu product could be produced at a 100-mesh topsize with the Elkhorn No. 3 coal. The detailed design of the 2 t/hr selective agglomeration module neared completion this quarter with the completion of additional revisions of both the process flow, and the process piping and instrument diagrams. Construction of the 2 t/hr PDU and advanced flotation module was completed this quarter and startup and shakedown testing began.

  10. HYBRID SULFUR ELECTROLYZER DEVELOPMENT, NHI WORK PACKAGE N-SR07TC0301, FY07 FIRST QUARTER REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Summers, W

    2006-12-20

    The proof of concept of SO2 electrolysis for the hybrid sulfur (HyS) process is the second priority research target of the DOE Nuclear Hydrogen Initiative's thermochemical program for FY07. The proof of concept of the liquid-phase option must be demonstrated at the single cell level for an extended run times (>100 hours). The rate of development of HyS will depend on the identification of a promising membrane or an alternative means for controlling sulfur formation. Once successful long-duration operation has been demonstrated, SRNL will develop a multi-cell stack that can be connected to the H2SO4 decomposer being developed by SNL for the S-I ILS for a Hybrid Sulfur Integrated Laboratory-Scale Experiment during FY 2008. During the first quarter of FY07, SRNL continued the component development and membrane development activities with the goal of identifying and characterizing improved electrodes, electrocatalysts, membranes and MEA configurations which could then be tested at larger scale in the SDE test facility. A modified glass cell was fabricated to allow measurements of sulfur dioxide (SO2) transport across membrane samples at elevated temperatures (up to 70 C). This testing also includes evaluating SO2 transport in different sulfuric acid concentrations (30-70 wt%). A new potentiostat/frequency analyzer was installed for determining ionic conductivity of membranes. This instrument enhances our capabilities to characterize membrane, electrocatalyst and MEA properties and performance. Continuing work from FY06, evaluations were preformed on various commercial and experimental membranes and electrocatalyst materials for the SDE. Several different types of commercially-available membranes were analyzed for sulfur dioxide transport as a function of acid strength including perfluorinated sulfonic acid (PFSA), sulfonated polyetherketone-ketone, and poly-benzimidazole (PBI) membranes. Experimental membranes from the sulfonated diels-alder polyphenylenes (SDAPP

  11. MHD generator electrode development. Quarterly report, October-December 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Sadler, J W; Cadoff, L H; Dietrick, D L

    1981-01-01

    This program is directed towards the engineering development of cold metallic electrodes which are alternatives to the use of platinum as an anode clad material for MHD generators. Results of continuing laboratory screening tests are presented. Improvements in the anode arc test methodology and test setup, which have resulted in improved reproducibility as well as test simplification, are discussed. Laboratory electrochemical corrosion testing has been initiated using aqueous and molten salts as the aggressive constituent in the electrolyte. Initial results from these tests are reported. On the basis of these test results, electrochemical corrosion tests using a molten salt are preferred. As a result of ongoing laboratory screening tests, acceptance criteria, which are interim in nature and are likely to change based on future test results have been defined for the anode arc and electrochemical corrosion tests. Reflecting the initial laboratory test results, a listing of candidate advanced alloys which should demonstrate improved corrosion resistance has been defined. Upon completion of WESTF modifications, facility checkout and activation operations have been initiated. Progress, as well as those difficulties which have been encountered, in completing WESTF activation is reported. Detailed engineering and test planning activities in support of WESTF tests are reported.

  12. Power systems development facility. Quarterly technical progress report, July 1, 1994--September 30, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The objective of this project is to evaluate hot gas particle control technologies using coal-derived gas streams. This will entail the design, construction, installation, and use of a flexible test facility which can operate under realistic gasification and combustion conditions. The major particulate control device issues to be addressed include the integration of the particulate control devices into coal utilization systems, on-line cleaning techniques, chemical and thermal degradation of components, fatigue or structural failures, blinding, collection efficiency as a function of particle size, and scale-up of particulate control systems to commercial size. The conceptual design of the facility was extended to include a within scope, phased expansion of the existing Hot Gas Cleanup Test Facility Cooperative Agreement to also address systems integration issues of hot particulate removal in advanced coal-based power generation systems. This expansion included the consideration of the following modules at the test facility in addition to the original Transport Reactor gas source and Hot Gas Cleanup Units: (1) Carbonizer/Pressurized Circulating Fluidized Bed Gas Source. (2) Hot Gas Cleanup Units to mate to all gas streams. (3) Combustion Gas Turbine. (4) Fuel Cell and associated gas treatment. This expansion to the Hot Gas Cleanup Test Facility is herein referred to as the Power Systems Development Facility (PSDF).

  13. Behaviour of organised disturbances in fully developed turbulent channel flow

    Indian Academy of Sciences (India)

    P K Sen; Srinivas V Veeravali

    2000-10-01

    In our earlier work we have shown the relevance of stability theory in understanding the sustenance of turbulence in turbulent boundary layers. Here we adopt the same model to study the evolution of organised disturbances in turbulent channel flow. Since the dominant modes are wall modes we find that the stability characteristics in the two flows are nearly identical although the boundary conditions (at the edge of the boundary layer and at the centre of the channel) are different. Comparisons with the experiments of Hussain and Reynolds are also presented.

  14. Development of molten carbonate fuel cell power plant technology. Quarterly technical progress report No. 5, October 1, 1980-December 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The overall objective of this program is to develop and verify the design of a prototype molten carbonate fuel cell stack which meets the requirements of a 1990's-competitive coal-fired electrical utility central station or industrial cogeneratin power plants. During this quarter, activity continued in all four task areas: Task 1 - system studies to define the reference power plant design; Task 2 - cell and stack design, development and verification; Task 3 - preparation for fabrication and testing of the full-scale prototype stack; and Task 4 - development of the capability to operate stacks on coal-derived gas.

  15. Magnetohydrodynamic projects at the CDIF (Component Development and Integration Facility)

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    This quarterly technical progress report presents the tasks accomplished at the Component Development and Integration Facility during the fourth quarter of FY90. Areas of technical progress this quarter included: coal system development; seed system development; test bay modification; channel power dissipation and distribution system development; oxygen system storage upgrade; iron core magnet thermal protection system oxygen checkout; TRW slag rejector/CDIF slag removal project; stack gas/environmental compliance upgrade; coal-fired combustor support; 1A channels fabrication and assembly; support of Mississippi State University diagnostic testing; test operations and results; data enhancement; data analysis and modeling; technical papers; and projected activities. 2 tabs.

  16. The Art of Multi-channel Hypermedia Application Development

    NARCIS (Netherlands)

    Synodinos, Dionysios G.; Avgeriou, Paris

    2003-01-01

    The plethora of networked devices and platforms that continuously come to light, as well as the emergence of alternative ways to access the internet, have increased the demand for multi-channel access to hypermedia applications. Researchers and practitioners nowadays not only have to deal with the c

  17. Sperm-specific ion channels: targets holding the most potential for male contraceptives in development.

    Science.gov (United States)

    Zheng, Li-Ping; Wang, Hua-Feng; Li, Bao-Ming; Zeng, Xu-Hui

    2013-10-01

    There is a global need for an ideal method of male contraception. However, the development of male contraceptives has not been well successful. Research on sperm-specific ion channels, especially the recent advance obtained from electrophysiological studies, has emphasized the conception that those channels are targets with the most potential to develop non-hormonal male contraceptives. While summarizing the general options for male contraception, this review focuses on the properties and functions of sperm ion channels together with the attempts of utilizing these channels to develop male contraceptives. We believe that a deeper insight into the signaling and molecular mechanisms by which ion channels regulate sperm functions will pave the way for developing novel male-based contraceptives.

  18. Voltage-gated ion channel dysfunction precedes cardiomyopathy development in the dystrophic heart.

    Directory of Open Access Journals (Sweden)

    Xaver Koenig

    Full Text Available Duchenne muscular dystrophy (DMD, caused by mutations in the dystrophin gene, is associated with severe cardiac complications including cardiomyopathy and cardiac arrhythmias. Recent research suggests that impaired voltage-gated ion channels in dystrophic cardiomyocytes accompany cardiac pathology. It is, however, unknown if the ion channel defects are primary effects of dystrophic gene mutations, or secondary effects of the developing cardiac pathology.To address this question, we first investigated sodium channel impairments in cardiomyocytes derived from dystrophic neonatal mice prior to cardiomyopahty development, by using the whole cell patch clamp technique. Besides the most common model for DMD, the dystrophin-deficient mdx mouse, we also used mice additionally carrying an utrophin mutation. In neonatal cardiomyocytes, dystrophin-deficiency generated a 25% reduction in sodium current density. In addition, extra utrophin-deficiency significantly altered sodium channel gating parameters. Moreover, also calcium channel inactivation was considerably reduced in dystrophic neonatal cardiomyocytes, suggesting that ion channel abnormalities are universal primary effects of dystrophic gene mutations. To assess developmental changes, we also studied sodium channel impairments in cardiomyocytes derived from dystrophic adult mice, and compared them with the respective abnormalities in dystrophic neonatal cells. Here, we found a much stronger sodium current reduction in adult cardiomyocytes. The described sodium channel impairments slowed the upstroke of the action potential in adult cardiomyocytes, and only in dystrophic adult mice, the QRS interval of the electrocardiogram was prolonged.Ion channel impairments precede pathology development in the dystrophic heart, and may thus be considered potential cardiomyopathy triggers.

  19. National Geothermal Academy. Geo-Heat Center Quarterly Bulletin, Vol. 31 No. 2 (Complete Bulletin). A Quarterly Progress and Development Report on the Direct Utilization of Geothermal Resources

    Energy Technology Data Exchange (ETDEWEB)

    Boyd, Tonya [ed.; Maddi, Phillip [ed.

    2012-08-01

    The National Geothermal Academy (NGA) is an intensive 8-week overview of the different aspects involved in developing a geothermal project, hosted at University of Nevada, Reno. The class of 2012 was the second graduating class from the academy and included 21 students from nine states, as well as Saudi Arabia, Dominica, India, Trinidad, Mexico. The class consisted of people from a wide range of scholastic abilities from students pursuing a Bachelor’s or Master’s degrees, to entrepreneurs and professionals looking to improve their knowledge in the geothermal field. Students earned 6 credits, either undergraduate or graduate, in engineering or geology. Overall, the students of the NGA, although having diverse backgrounds in engineering, geology, finance, and other sciences, came together with a common passion to learn more about geothermal.

  20. Sedimentary processes and development of the Zenisu deep-sea channel, Philippine Sea

    Institute of Scientific and Technical Information of China (English)

    WUShiguo; SakamotoIzumi

    2003-01-01

    Zenisu deep-sea channel originated from a volcanic arc region, Izu-Ogasawara Island Arc, and vanished in the Shikoku Basin of the Philippine Sea. According to the swath bathymetry, the deep-sea channel can be divided into three segments. They are Zenisu canyon, E-W fan channel and trough-axis channel. A lot of volcanic detritus were deposited in the Zenisu Trough via the deep-sea channel because it originated from volcanic arc settings. On the basis of the swath bathymetry, submersible and seismic reflection data, the deposits are characterized by turbidite and debrite deposits as those in the other major deep-sea channels. Erosion or few sediments were observed in the Zenisu canyon,whereas a lot of turbidites and debrites occurred in the E-W channel and trough axis channel. Cold seep communities,active fault and fluid flow were discovered along the lower slope of the Zenisu Ridge. Vertical sedimentary sequences in the Zenisu Trough consist of the four post-rift sequence units of the Shikoku Basin, among which Units A and B are two turbidite units. The development of Zenisu canyon is controlled by the N-S shear fault, the E-W fan channel is related to the E-W shear fault, and the trough-axis channel is related to the subsidence of central basin.

  1. Sedimentary processes and development of the Zenisu deep-sea channel, Philippine Sea

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Zenisu deep-sea channel originated from a volcanic arc region, Izu-Ogasawara Island Arc, and vanished in the Shikoku Basin of the Philippine Sea. According to the swath bathymetry, the deep-sea channel can be divided into three segments. They are Zenisu canyon, E-W fan channel and trough-axis channel. A lot of volcanic detritus were deposited in the Zenisu Trough via the deep-sea channel because it originated from volcanic arc settings. On the basis of the swath bathymetry, submersible and seismic reflection data, the deposits are characterized by turbidite and debrite deposits as those in the other major deep-sea channels. Erosion or few sediments were observed in the Zenisu canyon, whereas a lot of turbidites and debrites occurred in the E-W channel and trough axis channel. Cold seep communities, active fault and fluid flow were discovered along the lower slope of the Zenisu Ridge. Vertical sedimentary sequences in the Zenisu Trough consist of the four post-rift sequence units of the Shikoku Basin, among which Units A and B are two turbidite units. The development of Zenisu canyon is controlled by the N-S shear fault, the E-W fan channel is related to the E-W shear fault, and the trough-axis channel is related to the subsidence of central basin.

  2. Develop A Framework for Selection of Intermediary in Marketing Channel

    Directory of Open Access Journals (Sweden)

    Hamid Reza Irani

    2011-03-01

    Full Text Available This study seeks to examine how a company can select the best intermediary for itsMarketing channels with minimum of criteria and time. A theoretical framework is proposed basedon the most important tasks of intermediary and the criteria to measure them. There are four basictasks and thirty criteria in three independent levels. Subsequently, an exploratory case study inIranian Food industry is described to illustrate the value of the framework. It is possible to apply thetheoretical framework to select the intermediary for any industry or country. However, there mightbe possible location-specific or industry-specific limitations. Moreover, the framework has provedto be useful in improving the selection of the intermediary in marketing channel. This is a notableand promising side-effect of the exploratory study, at least from a managerial point of view.

  3. Development of an advanced high efficiency coal combustor for boiler retrofit. Quarterly report, November 1986--January 1987

    Energy Technology Data Exchange (ETDEWEB)

    Rini, M.J.; LaFlesh, R.C. [Combustion Engineering, Inc., Windsor, CT (United States); Beer, J.M.; Togan, M.A.; Yu, T.U. [Massachusetts Inst. of Tech., Cambridge, MA (United States); McGowan, J.G. [Univ. of Massachusetts, MA (US)

    1987-05-06

    During the quarter from October 1986 to January 1987 the following technical progress was made: (1) Initiated a literature study focusing on optimized burner aerodynamics and design methodologies for high efficiency swirl generation devices, (2) Completed design of Swirler Test Facility (STF) to be used for comparative swirler evaluations, and (3) Initiated facility preparation at MIT for thermal atomization studies and high shear viscosity measurements.

  4. Development of a video-based slurry sensor for on-line ash analysis. Quarterly report, April 1, 1996--June 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Adel, G.T.; Luttrell, G.H.

    1996-07-22

    Automatic control of fine coal cleaning circuits has traditionally been limited by the lack of sensors for on-line ash analysis. Although several nuclear-based analyzers are available, none have seen widespread acceptance. This is largely due to the fact that nuclear sensors are expensive and tend to be influenced by changes in seam type and pyrite content. Recently, researchers at VPI&SU have developed an optical sensor for phosphate analysis. The sensor uses image processing technology to analyze video images of phosphate ore. It is currently being used by PCS Phosphate for off-line analysis of dry flotation concentrate. The primary advantages of optical sensors over nuclear sensors are that they are significantly cheaper, are not subject to measurement variations due to changes in high atomic number minerals, are inherently safer and require no special radiation permitting. The purpose of this work is to apply the knowledge gained in the development of an optical phosphate analyzer to the development of an on-line ash analyzer for fine coal slurries. During the past quarter, an industrially-hardened version of the video-based ash analyzer was designed and constructed. All components are now in place at the Middle Fork plant site awaiting the installation of a sample line from the flotation columns to the analyzer. The sensor now appears ready for long-term, in-plant testing during the final quarter of this project. 1 fig., 1 tab.

  5. Development of New Openers of ATP-Sensitive Potassium Channels of the Cell Membranes

    Directory of Open Access Journals (Sweden)

    Strutynskyi, R.B.

    2016-07-01

    Full Text Available Two innovative libraries (413 cyclosulfamides and 709 orthopyridine sulfamides of potential new openers of ATP-sensitive potassium channels of cell membranes were developed. It is shown experimentally that at least ten new original compounds have properties of pharmacological openers of the channels. Seven compounds, namely Z851154982, Z56762024, Z1269122570, Z31153162, Z45679561, Z756371174 and Z649723638, open channels of both types — sarcoplasmic as well as mitochondrial membranes: Simultaneously, Z734043408 compound is a potent activator of aforementioned channels of sarcolemmal membrane only. Z31197374 and Z666664306 compounds show the affinity onlyto КATP-channels of mitochondrial type. The results of the work can be used by pharmaceutical companies and scientific research institutes.

  6. Development of a new laser Doppler velocimeter for the Ames High Reynolds Channel No. II

    Science.gov (United States)

    Seegmiller, H. L.; Bader, J. B.; Cooney, J. P.; De Young, A.; Donaldson, R. W., Jr.

    1985-01-01

    A new two-channel laser Doppler velocimeter developed for the Ames High Reynolds Channel No. 2 is described. Design features required for the satisfactory operation of the optical system in the channel environment are discussed. Fiber optics are used to transmit the megahertz Doppler signal to the photodetectors located outside the channel pressure vessel, and provision is made to isolate the optical system from pressure and thermal strain effects. Computer-controlled scanning mirrors are used to position the laser beams in the channel flow. Techniques used to seed the flow with 0.5-micron-diam polystyrene spheres avoiding deposition on the test-section windows and porous boundary-layer removal panels are described. Preliminary results are presented with a discussion of several of the factors affecting accuracy.

  7. Development of a new laser Doppler velocimeter for the Ames High Reynolds Channel No. 2

    Science.gov (United States)

    Seegmiller, H. L.; Bader, J. B.; Cooney, J. P.; Deyoung, A.; Donaldson, R. W., Jr.; Gunter, W. D., Jr.; Harrison, D. R.

    1985-01-01

    A new two-channel laser Doppler velocimeter developed for the Ames High Reynolds Channel No. 2 is described. Design features required for the satisfactory operation of the optical system in the channel environment are discussed. Fiber optics are used to transmit the megahertz Doppler signal to the photodetectors located outside the channel pressure vessel, and provision is made to isolate the optical system from pressure and thermal strain effects. Computer-controlled scanning mirrors are used to position the laser beams in the channel flow. Techniques used to seed the flow with 0.5-micron-diam polystyrene spheres avoiding deposition on the test-section windows and porous boundary-layer removal panels are described. Preliminary results are presented with a discussion of several of the factors affecting accuracy.

  8. 76 FR 22910 - ACHP Quarterly Business Meeting

    Science.gov (United States)

    2011-04-25

    ... From the Federal Register Online via the Government Publishing Office ADVISORY COUNCIL ON HISTORIC PRESERVATION ACHP Quarterly Business Meeting AGENCY: Advisory Council on Historic Preservation. ACTION: Notice... c. Southwest Renewable Energy Development and Historic Preservation Working Group IX. New Business...

  9. Development of a high-performance boiling heat exchanger by improved liquid supply to narrow channels.

    Science.gov (United States)

    Ohta, Haruhiko; Ohno, Toshiyuki; Hioki, Fumiaki; Shinmoto, Yasuhisa

    2004-11-01

    A two-phase flow loop is a promising method for application to thermal management systems for large-scale space platforms handling large amounts of energy. Boiling heat transfer reduces the size and weight of cold plates. The transportation of latent heat reduces the mass flow rate of working fluid and pump power. To develop compact heat exchangers for the removal of waste heat from electronic devices with high heat generation density, experiments on a method to increase the critical heat flux for a narrow heated channel between parallel heated and unheated plates were conducted. Fine grooves are machined on the heating surface in a transverse direction to the flow and liquid is supplied underneath flattened bubbles by the capillary pressure difference from auxiliary liquid channels separated by porous metal plates from the main heated channel. The critical heat flux values for the present heated channel structure are more than twice those for a flat surface at gap sizes 2 mm and 0.7 mm. The validity of the present structure with auxiliary liquid channels is confirmed by experiments in which the liquid supply to the grooves is interrupted. The increment in the critical heat flux compared to those for a flat surface takes a maximum value at a certain flow rate of liquid supply to the heated channel. The increment is expected to become larger when the length of the heated channel is increased and/or the gravity level is reduced.

  10. Silicon-on ceramic process. Silicon sheet growth and device development for the large-area silicon sheet and cell development tasks of the low-cost solar array project. Quarterly report No. 12, April 2, 1979-June 29, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, P.W.; Zook, J.D.; Heaps, J.D.; Grung, B.L.; Koepke, B.; Schuldt, S.B.

    1979-07-31

    The objective of this research program is to investigate the technical and economic feasibility of producing solar-cell-quality sheet silicon. We plan to do this by coating one surface of carbonized ceramic substrates with a thin layer of large-grain polycrystalline silicon from the melt. During the quarter, significant progress was demonstrated in several areas: (1) a 10-cm/sup 2/ cell having 9.9 percent conversion efficiency (AM1, AR) was fabricated; (2) the Honeywall-sponsored SCIM coating development succeeded in producing a 225-cm/sup 2/ layer of sheet silicon (18 inches x 2 inches); and (3) 100 ..mu..m-thick coatings at pull speed of 0.15 cm/sec wer$obta9ned, although apoproximately 50 percent of the layer exhibited dendritic growth. Other results and accomplishments during the quarter are reported in detail. (WHK)

  11. Strategic Petroleum Reserve: Annual/quarterly report

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-16

    Section 165 of the Energy Policy and Conservation Act (Public Law 94-163), as amended, requires the Secretary of Energy to submit annual and quarterly reports to the President and the Congress on activities of the Strategic Petroleum Reserve. This report combines the fourth quarter 1993 Quarterly Report with the 1993 Annual Report. Key activities described include appropriations; life extension planning; expansion planning; Strategic Petroleum Reserve oil acquisition; the oil stabilization program; and the refined petroleum product reserve test programs. Sections of this report also describe the program mission; the storage facility development program; environmental compliance; budget and finance; and drawdown and distribution.

  12. Fully depleted back-illuminated p-channel CCD development

    Energy Technology Data Exchange (ETDEWEB)

    Bebek, Chris J.; Bercovitz, John H.; Groom, Donald E.; Holland, Stephen E.; Kadel, Richard W.; Karcher, Armin; Kolbe, William F.; Oluseyi, Hakeem M.; Palaio, Nicholas P.; Prasad, Val; Turko, Bojan T.; Wang, Guobin

    2003-07-08

    An overview of CCD development efforts at Lawrence Berkeley National Laboratory is presented. Operation of fully-depleted, back-illuminated CCD's fabricated on high resistivity silicon is described, along with results on the use of such CCD's at ground-based observatories. Radiation damage and point-spread function measurements are described, as well as discussion of CCD fabrication technologies.

  13. Plasmodesmata: channels for intercellular signaling during plant growth and development.

    Science.gov (United States)

    Sevilem, Iris; Yadav, Shri Ram; Helariutta, Ykä

    2015-01-01

    Plants have evolved strategies for short- and long-distance communication to coordinate plant development and to adapt to changing environmental conditions. Plasmodesmata (PD) are intercellular nanochannels that provide an effective pathway for both selective and nonselective movement of various molecules that function in diverse biological processes. Numerous non-cell-autonomous proteins (NCAP) and small RNAs have been identified that have crucial roles in cell fate determination and organ patterning during development. Both the density and aperture size of PD are developmentally regulated, allowing formation of spatial symplastic domains for establishment of tissue-specific developmental programs. The PD size exclusion limit (SEL) is controlled by reversible deposition of callose, as well as by some PD-associated proteins. Although a large number of PD-associated proteins have been identified, many of their functions remain unknown. Despite the fact that PD are primarily membranous structures, surprisingly very little is known about their lipid composition. Thus, future studies in PD biology will provide deeper insights into the high-resolution structure and tightly regulated functions of PD and the evolution of PD-mediated cell-to-cell communication in plants.

  14. Bank accretion and the development of vegetated depositional surfaces along modified alluvial channels

    Science.gov (United States)

    Hupp, C.R.; Simon, A.

    1991-01-01

    This paper describes the recovery of stable bank form and development of vegetated depositional surfaces along the banks of channelized West Tennessee streams. Most perennial streams in West Tennessee were straightened and dredged since the turn of the century. Patterns of fluvial ecological responses to channelization have previously been described by a six-stage model. Dendrogeomorphic (tree-ring) techniques allowed the determination of location, timing, amount, and rate of bank-sediment deposition. Channel cross sections and ecological analyses made at 101 locations along 12 streams, encompassing bends and straight reaches, show that channel and bank processes initially react vertically to channelization through downcutting. A depositional surface forms on banks once bed-degradation and heightened bank mass wasting processes have eased or slowed. The formation of this depositional surface marks the beginning of bank recovery from channelization. Dominating lateral processes, characteristic of stable or natural channels, return during the formation and expansion of the depositional surface, suggesting a relation with thalweg deflection, point-bar development, and meanderloop extension. Characteristic woody riparian vegetation begins to grow as this depositional surface develops and becomes part of the process and form of restabilizing banks. The depositional surface initially forms low on the bank and tends to maintain a slope of about 24??. Mean accretion rates ranges from 5.9 cm/yr on inside bends to 0 cm/yr on most outside bends; straight reaches have a mean-accretion rate of 4.2 cm/yr. The relatively stable, convex upward, depositional surface expands and ultimately attaches to the flood plain. The time required for the recovery process to reach equilibrium averaged about 50 years. Indicative pioneer speccies of woody riparian vegetation include black willow, river birch, silver maple, and boxelder. Stem densities generally decrease with time after and

  15. A different dihydropyridine calcium channel blocker in hypertensive patients who developed pedal edema on dihydropyridine calcium channel blocker therapy

    Directory of Open Access Journals (Sweden)

    Ayşe Yüksel

    2014-03-01

    Full Text Available Abstract Aim. Dihydropyridine calcium channel blockers (CCB are widely preferred for the treatment of hypertension for their efficacy, metabolic neutrality and low side effect profile. However pedal edema formation limits their usage. The aim of the present study is to evaluate the incidence of pedal edema formation with a different dihydropyridine CCB in hypertensive patients who developed pedal edema during a dihydropyridine CCB therapy. Method. Fifty-eight hypertensive patients (34 female, 24 male, mean age: 65.3±10.5 in whom pedal edema developed during treatment with a dihydropyridine CCB (amlodipine 10mg/day in 40 patients, amlodipine 5mg/day in 14 patients, nifedipine GITS 30mg/day in 4 patients were enrolled. CCB which caused pedal edema was withdrawn and a different CCB (felodipine or lacidipine were initiated after the resolution of the pedal edema. CCB therapy was continued as long as the patient tolerated pedal edema. Results. At the end of one year, 44 out of 58 patients (36 [81.8%] free of pedal edema, 8 [19.2%] with pedal edema continued CCB therapy. Eleven (37.9% patients in the felodipine group and 9 (31.0% patients in the lacidipine group developed pedal edema. In 7 patients in felodipine group and in 5 patients in the lacidipine group the study drug was withdrawn due to pedal edema. In two patients, study drug was withdrawn due to intractable headache (felodipine group or due to flushing (lacidipine group. Conclusion. A different group of dihydropyridine CCB be used as an alternative therapy for hypertension whenever pedal edema develops during treatment with a dihydropyridine CCB.

  16. The DVB Channel Coding Application Using the DSP Development Board MDS TM-13 IREF

    Directory of Open Access Journals (Sweden)

    M. Slanina

    2004-12-01

    Full Text Available The paper deals with the implementation of the channel codingaccording to DVB standard on DSP development board MDS TM-13 IREF andPC. The board is based on Philips Nexperia media processor andintegrates hardware video ADC and DAC. The program libraries featuresused for MPEG based video compression are outlined and then thealgorithms of channel decoding (FEC protection against errors arepresented including the flowchart diagrams. The paper presents thepartial hardware implementation of the simulation system that coversselected phenomena of DVB baseband processing and it is used for realtime interactive demonstration of error protection influence ontransmitted digital video in laboratory and education.

  17. PROPERTIES OF VOLTAGE-GATED SODIUM CHANNELS IN DEVELOPING AUDITORY NEURONS OF THE MOUSE IN VITRO

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Objective. To investigate the properties of voltage-gated sodium (Na+) channels in developing auditoryneurons during early postnatal stages in the mammalian central nervous system.Methods. Using the whole-cell voltage-clamp technique, we have studied changes in the electrophysi-ological properties of Na+ channels in the principal neurons of the medial nucleus of the trapezoid body (MNTB).Results. We found that MNTB neurons already express functional Na+ channels at postnatal day 1 (P1),and that channel density begins to increase at P5 when the neurons receive synaptic innervation andreach its maximum (~3 fold) at P11 when functional hearing onsets. These changes were paralleled byan age-dependent acceleration in both inactivation and recovery from inactivation. In contrast, there wasvery little alteration in the voltage-dependence of inactivation.Conclusion. These profound changes in the properties of voltage-gated Na+ channels may increase theexcitability of MNTB neurons and enhance their phase-locking fidelity and capacity during high-frequencysynaptic transmission.

  18. Experimental study of horizontal annular channels under non-developed conditions

    Energy Technology Data Exchange (ETDEWEB)

    Delgadino, G. [Rensselaer Polytechnic Institute, Troy, NY (United States); Balino, J.; Carrica, P. [Centro Atomico Bariloche e Instituto Balseriro (Argentina)

    1995-09-01

    In this work an experimental study of the two-phase air-water flow in a horizontal annular channel under non-developed conditions is presented. A conductive local probe was placed at the end of the channel to measure the local phase indication function under a wide range of gas and water flow rates. The signal was processed to obtain the void fraction and statistical distributions of liquid and gas residence times. From these data the topology of the flow could be inferred. A laser intermittence detector was also located close to the channel exit, in order to measure statistical parameters for intermittent flows by means of a two-probe method.

  19. Rip channel development on nonbarred beaches: The importance of a lag in suspended-sediment transport

    Science.gov (United States)

    Murray, A. Brad

    2004-04-01

    On approximately planar beaches, rip channel development is often preceded by a period in which jet-like rip currents develop in apparently random locations, and dissipate after minutes to tens of minutes. The subsequent development of sharp-edged, trough-like channels extending across the surf zone suggests that rip currents on planar beaches cause local erosion. Conversely, channels are known to cause localized offshore-directed flow, and once channels have formed on approximately planar beaches, rip currents no longer occur in apparently random locations, but are restricted to the locations of the channels. Apparently, the excavation of channels by rip currents on planar beaches triggers a positive feedback between the morphological development and the flow. However, theoretical analysis indicates that, when depth increases with distance from shore, and sediment transport is treated as a function only of local flow conditions, channel development in the vicinity of a rip current may not occur. In numerical simulations (using a "cellular" model of nonbathymetrically driven rip currents) in which sediment flux on a planar beach is driven by approximately realistic rip current velocity patterns, deposition occurs under parts of the rip currents (especially in the seaward half of the surf zone), and these "rip ridges" cause a negative feedback. In these simulations, as in most models treating surf zone sediment transport, sediment flux is assumed to be strictly a function of local hydrodynamic conditions. However, Observations of sediment-laden rip-current plumes extending well beyond the surf zone suggest that suspended sediment transport is not always in equilibrium with local conditions. Other simulations employ a treatment of suspended-sediment transport that allows for a lag in the adjustment of fluxes to the changes in local hydrodynamic conditions that the sediment is advected through. With this nonlocal sediment-transport, the flux of sediment out of the

  20. New insight into flow development and two dimensionality of turbulent channel flows

    Science.gov (United States)

    Vinuesa, Ricardo; Bartrons, Eduard; Chiu, Daniel; Dressler, Kristofer M.; Rüedi, J.-D.; Suzuki, Yasumasa; Nagib, Hassan M.

    2014-06-01

    The experimental conditions required for a turbulent channel flow to be considered fully developed and nominally two dimensional remain a challenging objective. In this study, we show that the flow obtained in a high-aspect-ratio channel facility cannot be reproduced by direct numerical simulations (DNSs) of spanwise-periodic channel flows; therefore, we reserve the term "channel" for spanwise-periodic DNSs and denote the experimental flow by the term "duct." Oil film interferometry (OFI) and static pressure measurements were carried out over the range in an adjustable-geometry duct flow facility. Three-dimensional effects were studied by considering different aspect ratio (AR) configurations and also by fixing the AR and modifying the hydraulic diameter of the section. The conditions at the centerplane of the duct were characterized through the local skin friction from the OFI and the centerline velocity at four different streamwise locations and through the wall shear based on the streamwise global pressure gradient. The skin friction obtained from pressure gradient overestimated the local shear measurements obtained from the OFI and did not reproduce the same AR dependence observed with OFI. Differences between the local and global techniques were also reflected in the flow development. For the range of Reynolds numbers tested, the development length of high-aspect-ratio ducts scales with the duct full-height and is around , much larger than the values of around 100-150 H previously reported in the literature.

  1. Development of a 64 channel ultrasonic high frequency linear array imaging system.

    Science.gov (United States)

    Hu, ChangHong; Zhang, Lequan; Cannata, Jonathan M; Yen, Jesse; Shung, K Kirk

    2011-12-01

    In order to improve the lateral resolution and extend the field of view of a previously reported 48 element 30 MHz ultrasound linear array and 16-channel digital imaging system, the development of a 256 element 30 MHz linear array and an ultrasound imaging system with increased channel count has been undertaken. This paper reports the design and testing of a 64 channel digital imaging system which consists of an analog front-end pulser/receiver, 64 channels of Time-Gain Compensation (TGC), 64 channels of high-speed digitizer as well as a beamformer. A Personal Computer (PC) is used as the user interface to display real-time images. This system is designed as a platform for the purpose of testing the performance of high frequency linear arrays that have been developed in house. Therefore conventional approaches were taken it its implementation. Flexibility and ease of use are of primary concern whereas consideration of cost-effectiveness and novelty in design are only secondary. Even so, there are many issues at higher frequencies but do not exist at lower frequencies need to be solved. The system provides 64 channels of excitation pulsers while receiving simultaneously at a 20-120 MHz sampling rate to 12-bits. The digitized data from all channels are first fed through Field Programmable Gate Arrays (FPGAs), and then stored in memories. These raw data are accessed by the beamforming processor to re-build the image or to be downloaded to the PC for further processing. The beamformer that applies delays to the echoes of each channel is implemented with the strategy that combines coarse (8.3 ns) and fine delays (2 ns). The coarse delays are integer multiples of the sampling clock rate and are achieved by controlling the write enable pin of the First-In-First-Out (FIFO) memory to obtain valid beamforming data. The fine delays are accomplished with interpolation filters. This system is capable of achieving a maximum frame rate of 50 frames per second. Wire phantom images

  2. Development of a 64 channel ultrasonic high frequency linear array imaging system

    Science.gov (United States)

    Hu, ChangHong; Zhang, Lequan; Cannata, Jonathan M.; Yen, Jesse; Shung, K. Kirk

    2011-01-01

    In order to improve the lateral resolution and extend the field of view of a previously reported 48 element 30 MHz ultrasound linear array and 16-channel digital imaging system, the development of a 256 element 30 MHz linear array and an ultrasound imaging system with increased channel count has been undertaken. This paper reports the design and testing of a 64 channel digital imaging system which consists of an analog front-end pulser/receiver, 64 channels of Time-Gain Compensation (TGC), 64 channels of high-speed digitizer as well as a beamformer. A Personal Computer (PC) is used as the user interface to display real-time images. This system is designed as a platform for the purpose of testing the performance of high frequency linear arrays that have been developed in house. Therefore conventional approaches were taken it its implementation. Flexibility and ease of use are of primary concern whereas consideration of cost-effectiveness and novelty in design are only secondary. Even so, there are many issues at higher frequencies but do not exist at lower frequencies need to be solved. The system provides 64 channels of excitation pulsers while receiving simultaneously at a 20 MHz–120 MHz sampling rate to 12-bits. The digitized data from all channels are first fed through Field Programmable Gate Arrays (FPGAs), and then stored in memories. These raw data are accessed by the beamforming processor to re-build the image or to be downloaded to the PC for further processing. The beamformer that applies delays to the echoes of each channel is implemented with the strategy that combines coarse (8.3ns) and fine delays (2 ns). The coarse delays are integer multiples of the sampling clock rate and are achieved by controlling the write enable pin of the First-In-First-Out (FIFO) memory to obtain valid beamforming data. The fine delays are accomplished with interpolation filters. This system is capable of achieving a maximum frame rate of 50 frames per second. Wire phantom

  3. Bangladesh Quarterly Economic Update - December 2014

    OpenAIRE

    Asian Development Bank

    2015-01-01

    The Bangladesh Quarterly Economic Update (QEU) has been produced by the Bangladesh Resident Mission of the Asian Development Bank since March 2001. The QEU provides information and analysis on Bangladesh’s macroeconomic and sector developments, key development challenges, and policy and institutional reforms. The QEU has wide readership in government, academia, development partners, private sector, and civil society.

  4. Bangladesh Quarterly Economic Update June 2014

    OpenAIRE

    Asian Development Bank

    2014-01-01

    The Bangladesh Quarterly Economic Update (QEU) has been produced by the Bangladesh Resident Mission of the Asian Development Bank since March 2001. The QEU provides information and analysis on Bangladesh’s macroeconomic and sector developments, key development challenges, and policy and institutional reforms. The QEU has wide readership in government, academia, development partners, private sector, and civil society.

  5. Bangladesh Quarterly Economic Update September 2014

    OpenAIRE

    Asian Development Bank

    2014-01-01

    The Bangladesh Quarterly Economic Update (QEU) has been produced by the Bangladesh Resident Mission of the Asian Development Bank since March 2001. The QEU provides information and analysis on Bangladesh’s macroeconomic and sector developments, key development challenges, and policy and institutional reforms. The QEU has wide readership in government, academia, development partners, private sector, and civil society.

  6. Final report for the virtual channel encryptor laboratory directed research and development project

    Energy Technology Data Exchange (ETDEWEB)

    Gibson, D.J.; Sarfaty, R.A.

    1997-08-01

    A workstation with a single physical connection to a data communications network may have a requirement for simultaneous `virtual` communication channels to more than one destination. This report describes the development of techniques based on the Data Encryption Standard (DES) which encrypt these virtual channels to secure the data being transmitted against unauthorized access. A software module has been developed for the UNIX operating system using these techniques for encryption, and some development has also been done on a hardware device to be included between the workstation and network which can also provide these functions. The material presented in this report will be useful to those with a need to protect information in data communications systems from unauthorized access.

  7. Development of automated welding processes for field fabrication of thick-walled pressure vessels: electron beam method. Fourth quarterly report, July 1--September 30, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Weber, C.M.

    1978-01-01

    This report is the fourth quarterly report of a project to develop and demonstrate an electron beam welding procedure for welding 8'' thick SA 387 Grade 22 Class 2 (2-1/4 Cr--1 Mo) steel. Due to the late arrival of the steel to be used in this project, a six month extension in the completion date has been made. Work is in progress for developing 4-1/2'' deep partial penetration electron beam welding procedures. A total of 257 welds have been made to date. Several defects have been encountered and successfully eliminated. The occurrence of a necklace defect, which has been shown to be a cold shut resulting from improper solidification, has not yet been eliminated. It has been observed that the beam oscillation pattern is influential on the behavior of the weld cavity during welding. In the vertical welding position, it has been determined that the use of a welding shoe is required.

  8. Development of automated welding processes for field fabrication of thick-walled pressure vessels: electron beam method. Fifth quarterly report, October 1--December 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Weber, C.M.

    1978-01-01

    This is the fifth quarterly report of a project to develop and demonstrate an electron beam welding procedure for welding 8'' thick SA 387 Grade 22 Class 2 (2-1/4 Cr--1 Mo) steel. A total of 324 welds have been made to date. Much difficulty has been encountered in the past in attempts to make partial penetration welds (4-1/2'' deep) which do not have a necklace defect. However, a beam oscillation pattern, the horseshoe pattern, has been successfully used to make defect-free, partial penetration welds in the horizontal position. An 8'' thick, defect-free weld was made. Determination of the optimum welding procedure has not yet been made though. For welding in the vertical position, a shoe was designed and used to make void-free, partial penetration welds. A welding procedure which produces defect-free welds in the vertical position has not yet been developed.

  9. Quarterly report for the electricity market. 2. quarter of 2012; Kvartalsrapport for kraftmarknaden. 2. kvartal 2012

    Energy Technology Data Exchange (ETDEWEB)

    Eliston, Anton Jaynand; Holmqvist, Erik; Lund, Per Tore Jensen; Magnussen, Ingrid; Viggen, Kjerstin Dahl; Willumsen, Mats Oeivind; Guren, Ingrid; Ulriksen, Margit Iren

    2012-07-01

    Fourth quarter of 2011 was unusually mild and wet, resulting in high energy inflow to the Norwegian reservoirs. Total inflow for the year was 149.2 TWh, 26.7 TWh more than normal. This ensured record-high 80.3 percent load factor at the end of the quarter.The stored energy amount in the reservoirs was thus 29.5 TWh greater than at the end of 2010/2011. Norway had a power consumption of 34.1 TWh in the fourth quarter. Compared with the same quarter of 2010, a decrease of 4.2 TWh, which can be connected to the mild weather development. The total Norwegian electricity consumption in 2011 was 125.1 TWh, or 6.9 TWh less than in 2010. Electricity production in the fourth quarter of 2011 was 38.3 GWh, an increase of 3.7 TWh from the same quarter the year before. The production increase were a result of the large volume of water in the system. Power production for the year 2011 was 128.1 TWh, an increase of 3.7 TWh from 2010. Kraft surplus was therefore large, and it was Norwegian net export of 4.2 TWh in the fourth quarter, and 3.0 TWh total for the year. In comparison, in the fourth quarter of 2010 Norwegian net import of 0.8 TWh and 7.5 TWh annually. The good resource combined with the low consumption gave a unusually low price levels in the wholesale market for electricity. On average for fourth quarter, the price of power in the East and South-East Norway Nok 264 / MWh, in western Norway Nok 260 / MWh, in Central Norway Nok 270 / MWh (eb)

  10. EMSL Quarterly Highlights Report: FY 2008, 3rd Quarter

    Energy Technology Data Exchange (ETDEWEB)

    Showalter, Mary Ann

    2008-09-16

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2007 - December 2007) of Fiscal Year 2008.

  11. EMSL Quarterly Highlights Report: 1st Quarter, FY08

    Energy Technology Data Exchange (ETDEWEB)

    Showalter, Mary Ann

    2008-01-28

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2007 - December 2007) of Fiscal Year 2008.

  12. EMSL Quarterly Highlights Report: 1st Quarter, Fiscal Year 2009

    Energy Technology Data Exchange (ETDEWEB)

    Showalter, Mary Ann; Kathmann, Loel E.; Manke, Kristin L.

    2009-02-02

    The EMSL Quarterly Highlights Report covers the science, staff and user recognition, and publication activities that occurred during the 1st quarter (October 2008 - December 2008) of Fiscal Year 2009.

  13. Development of vanadium-phosphate catalysts for methanol production by selective oxidation of methane. Quarterly technical progress report 10, July 1, 1995--September 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, R.L.

    1995-12-07

    This document is the tenth quarterly technical progress report under Contract No. DE-AC22-92PC92110 {open_quotes}Development of Vanadium-Phosphate Catalysts for Methanol Production by Selective Oxidation of Methane{close_quotes}. Activities focused on testing of additional modified and promoted catalysts and characterization of these materials. Attempts at improving the sensitivity of our GC based analytical systems were also made with some success. Methanol oxidation studies were initiated. These results are reported. Specific accomplishments include: (1) Methane oxidation testing of a suite of catalysts promoted with most of the first row transition metals was completed. Several of these materials produced low, difficult to quantify yields of formaldehyde. (2) Characterization of these materials by XRD and FTIR was performed with the goal of correlating activity and selectivity with catalyst properties. (3) We began to characterize catalysts prepared via modified synthesis methods designed to enhance acidity using TGA measurements of acetonitrile chemisorption and methanol dehydration to dimethyl ether as a test reaction. (4) A catalyst prepared in the presence of naphthalene methanol as a structural disrupter was tested for activity in methane oxidation. It was found that this material produced low yields of formaldehyde which were difficult to quantify. (5) Preparation of catalysts with no Bronsted acid sites. This was accomplished by replacement of exchangeable protons with potassium, and (6) Methanol oxidation studies were initiated to provide an indication of catalyst activity for decomposition of this desired product and as a method of characterizing the catalyst surface.

  14. Development of a video-based slurry sensor for on-line ash analysis. Eighth quarterly technical progress report, July 1, 1996--September 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Adel, G.T.; Luttrell, G.H.

    1996-10-22

    Automatic control of fine coal cleaning circuits has traditionally been limited by the lack of sensors for on-line ash analysis. Although several nuclear-based analyzers are available, none have seen widespread acceptance. This is largely due to the fact that nuclear sensors are expensive and tend to be influenced by changes in seam type and pyrite content. Recently, researchers at VPI&SU have developed an optical sensor for phosphate analysis. The sensor uses image processing technology to analyze video images of phosphate ore. It is currently being used by PCS Phosphate for off-fine analysis of dry flotation concentrate. The primary advantages of optical sensors over nuclear sensors are that they are significantly cheaper, are not subject to measurement variations due to changes in high atomic number minerals, are inherently safer and require no special radiation permitting. The purpose of this work is to apply the knowledge gained in the development of an optical phosphate analyzer to the development of an on-fine ash analyzer for fine coal slurries. During the past quarter, installation of the video-based ash analyzer at the Middle Fork plant site was completed. A method of measuring and automatically adjusting for small variations in the sensor illumination scheme was developed and implemented. Initial on-line testing of the ash analyzer has yielded adequate calibration information, and the sensor is currently operating on-line. The on-line performance of the sensor is under review and the information from this review will be included in the final report.

  15. Molecular pharmacology of the calcium channel: evidence for subtypes, multiple drug-receptor sites, channel subunits, and the development of a radioiodinated 1,4-dihydropyridine calcium channel label, (/sup 125/I)iodipine

    Energy Technology Data Exchange (ETDEWEB)

    Glossmann, H.; Ferry, D.R.; Goll, A.; Rombusch, M.

    1984-01-01

    Radiolabeled Ca2+ antagonists (1,4-dihydropyridines, verapamil, and D-cis-diltiazem) were used to study voltage-operated Ca2+ channels in different excitable tissues. The concept of three subtypes of Ca2+ channels, represented by brain, heart, and skeletal-muscle isoreceptors for 1,4-dihydropyridines, is developed. The three subtypes are characterized by a variety of criteria. Despite the biochemical differences between the subtypes, they have the same Mr in situ by target-size analysis (Mr approximately equal to 180,000, when evaluated by (/sub 3/H)nimodipine). The concept of the metalloprotein nature of the channel and the interaction of channel drugs with the Me2+ binding sites of the ionic pore is demonstrated. Distinct but interacting drug-receptor sites of the Ca2+ channel are found by direct labeling as well as indirectly by drug competition studies. The authors distinguish between the 1,4-dihydropyridine site, the verapamil site, and the D-cis-diltiazem site. Each receptor site can exist in high and low-affinity state; the distribution of receptor sites in these states is regulated by temperature, ions, and drugs. The concept of intrinsic activity of drugs to stabilize the high-affinity state is exemplified for the 1,4-dihydropyridines. A change in the channel architecture is induced by binding of D-cis-diltiazem to its drug receptor site. This is proven by target-size analysis of the channel in situ. Partially purified t-tubule membranes from skeletal muscle are an extremely rich source of Ca2+ channel drug-receptor sites. The stoichiometry was determined in this preparation and found to be four verapamil:two 1,4-dihydropyridine:one D-cis-diltiazem site. A novel Ca2+ channel probe, (/sup 125/I)iodipine (2,200 Ci/mmol), was synthetized, and the properties of this ligand are presented.

  16. Practical superconductor development for electrical applications - Argonne National Laboratory quarterly report for the period ending September 30, 2002.

    Energy Technology Data Exchange (ETDEWEB)

    Dorris, S. E.

    2002-12-02

    This is a multiyear experimental research program that focuses on improving relevant material properties of high-T{sub c} superconductors (HTSs) and developing fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of the Argonne (ANL) program.

  17. Practical superconductor development for electrical power applications - Argonne National Laboratory - quarterly report for the period ending June 30, 2001.

    Energy Technology Data Exchange (ETDEWEB)

    Dorris, S. E.

    2001-08-21

    This is a multiyear experimental research program focused on improving relevant material properties of high-T{sub c} superconductors (HTSs) and on development of fabrication methods that can be transferred to industry for production of commercial conductors. The development of teaming relationships through agreements with industrial partners is a key element of the Argonne (ANL) program.

  18. Applied Meteorology Unit (AMU) Quarterly Report - Fourth Quarter FY-09

    Science.gov (United States)

    Bauman, William; Crawford, Winifred; Barrett, Joe; Watson, Leela; Wheeler, Mark

    2009-01-01

    This report summarizes the Applied Meteorology Unit (AMU) activities for the fourth quarter of Fiscal Year 2009 (July - September 2009). Tasks reports include: (1) Peak Wind Tool for User Launch Commit Criteria (LCC), (2) Objective Lightning Probability Tool. Phase III, (3) Peak Wind Tool for General Forecasting. Phase II, (4) Update and Maintain Advanced Regional Prediction System (ARPS) Data Analysis System (ADAS), (5) Verify MesoNAM Performance (6) develop a Graphical User Interface to update selected parameters for the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLlT)

  19. Short communication: Immunoglobulin variation in quarter-milked colostrum.

    Science.gov (United States)

    Baumrucker, Craig R; Stark, Andrea; Wellnitz, Olga; Dechow, Chad; Bruckmaier, Rupert M

    2014-01-01

    Whereas whole first-milked colostrum IgG1 variation is documented, the IgG1 difference between the quarter mammary glands of dairy animals is unknown. First colostrum was quarter-collected from healthy udders of 8 multiparous dairy cows, all within 3h of parturition. Weight of colostrum produced by individual quarters was determined and a sample of each was frozen for subsequent analysis. Immunoglobulin G1 concentration (mg/mL) was measured by ELISA and total mass (g) was calculated. Standard addition method was used to overcome colostrum matrix effects and validate the standard ELISA measures. Analysis of the data showed that cow and quarter (cow) were significantly different in both concentration and total mass per quarter. Analysis of the mean IgG1 concentration of the front and rear quarters showed that this was not different, but the large variation in individual quarters confounds the analysis. This quarter difference finding indicates that each mammary gland develops a different capacity to accumulate precolostrum IgG1, whereas the circulating hormone concentrations that induce colostrogenesis reach the 4 glands similarly. This finding also shows that the variation in quarter colostrum production is a contributor to the vast variation in first milking colostrum IgG1 content. Finally, the data suggests other factors, such as locally acting autocrine or paracrine, epigenetic, or stochasticity, in gene regulation mechanisms may impinge on colostrogenesis capacity.

  20. Obstacles to Development of Marketing Channels of Agricultural Products in China and Countermeasures

    OpenAIRE

    Han, Chun-mei

    2011-01-01

    This paper introduces the connotation of marketing channels of agricultural products, and gives an overall of current modes of marketing channels of agricultural products in China, including the marketing channel of transportation and sale of agricultural products, the marketing channel of intermediary sales agent, and the marketing channel of mutual cooperation. The problems existing in the marketing channel of agricultural products in China as follows, first, the cost is high; second, the t...

  1. Development of a video-based slurry sensor for on-line ash analysis. Sixth quarterly technical progress report, January 1, 1996--March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Adel, G.T.; Luttrell, G.H.

    1996-04-28

    Automatic control of fine coal cleaning circuits has traditionally been limited by the lack of sensors for on-line ash analysis. Although several nuclear-based analyzers are available, none have seen widespread acceptance. This is largely due to the fact that nuclear sensors are expensive and tend to be influenced by changes in seam type and pyrite content. Recently, researchers at VPI&SU have developed an optical sensor for phosphate analysis. The sensor uses image processing technology to analyze video images of phosphate ore. It is currently being used by PCS Phosphate for off-line analysis of dry flotation concentrate. The primary advantages of optical sensors over nuclear sensors are that they are significantly cheaper, are not subject to measurement variations due to changes in high atomic number minerals, are inherently safer and require no special radiation permitting. The purpose of this work is to apply the knowledge gained in the development of an optical phosphate analyzer to the development of an on-line ash analyzer for fine coal slurries. During the past quarter, calibration tests were conducted on-site at the Middle Fork coal preparation plant owned and operated by Pittston Coal Company. After several plant visits, a consistent sensor calibration was obtained with approximately 95% of all samples analyzed falling within {plus_minus}2% ash of the best fit calibration line. The resolution of the optical analyzer was found to be approximately 0.5% ash per gray level increment. A linear neural network learning algorithm was found to be the most appropriate method for calibrating the sensor. The sensor now appears to be ready for installation and long-term testing at the Middle Fork test site.

  2. TRPM7-like channels are functionally expressed in oocytes and modulate post-fertilization embryo development in mouse

    Science.gov (United States)

    Carvacho, Ingrid; Ardestani, Goli; Lee, Hoi Chang; McGarvey, Kaitlyn; Fissore, Rafael A.; Lykke-Hartmann, Karin

    2016-01-01

    The Transient Receptor Potential (TRP) channels are a family of cationic ion channels widely distributed in mammalian tissues. In general, the global genetic disruption of individual TRP channels result in phenotypes associated with impairment of a particular tissue and/or organ function. An exception is the genetic ablation of the TRP channel TRPM7, which results in early embryonic lethality. Nevertheless, the function of TRPM7 in oocytes, eggs and pre-implantation embryos remains unknown. Here, we described an outward rectifying non-selective current mediated by a TRP ion channel in immature oocytes (germinal vesicle stage), matured oocytes (metaphase II eggs) and 2-cell stage embryos. The current is activated by specific agonists and inhibited by distinct blockers consistent with the functional expression of TRPM7 channels. We demonstrated that the TRPM7-like channels are homo-tetramers and their activation mediates calcium influx in oocytes and eggs, which is fundamental to support fertilization and egg activation. Lastly, we showed that pharmacological inhibition of the channel function delays pre-implantation embryo development and reduces progression to the blastocyst stage. Our data demonstrate functional expression of TRPM7-like channels in mouse oocytes, eggs and embryos that may play an essential role in the initiation of embryo development. PMID:27681336

  3. Developing Buoyancy Driven Flow of a Nanofluid in a Vertical Channel Subject to Heat Flux

    Directory of Open Access Journals (Sweden)

    Nirmal C. Sacheti

    2014-01-01

    Full Text Available The developing natural convective flow of a nanofluid in an infinite vertical channel with impermeable bounding walls has been investigated. It is assumed that the nanofluid is dominated by two specific slip mechanisms and that the channel walls are subject to constant heat flux and isothermal temperature, respectively. The governing nonlinear partial differential equations coupling different transport processes have been solved numerically. The variations of velocity, temperature, and nanoparticles concentration have been discussed in relation to a number of physical parameters. It is seen that the approach to the steady-state profiles of velocity and temperature in the present work is different from the ones reported in a previous study corresponding to isothermal wall conditions.

  4. Development of a portable multi-channel system for plant physiological signal recording

    Directory of Open Access Journals (Sweden)

    Ting Li

    2016-06-01

    Full Text Available Bioelectrical signals can reflect physiological state of organs or tissues in plants and have a significant potential value in research of plant stress tolerance. In order to study the relationship between environment factors and electrical signals in plant, a portable multi-channel physiological signal acquisition system which relevant in plant physiology research was developed. Environment parameters and electrical signals can be measured in different channels by the acquisition system simultaneously and the measurement data will be displayed in an embedded integrated touch screen which is the system processing core. The system was validated to be stable and reliable after the calibration and repeated experiments of recording electrical signals in Helianthus annuus L.

  5. [Software development of multi-element transient signal acquisition and processing with multi-channel ICP-AES].

    Science.gov (United States)

    Zhang, Y; Zhuang, Z; Wang, X; Zhu, E; Liu, J

    2000-02-01

    A software for multi-channel ICP-AES multi-element transient signal acquisition and processing were developed in this paper. It has been successfully applied to signal acquisition and processing in many transient introduction techniques on-line hyphenated with multi-channel ICP-AES.

  6. Quarterly environmental data summary for first quarter 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-06-01

    In support of the Weldon Spring Site Remedial Action Project Federal Facilities Agreement, a copy of the Quarterly Environmental Data Summary (QEDS) for the first quarter of 1999 is enclosed. The data presented in this constitute the QEDS. The data, except for air monitoring data and site KPA generated data (uranium analyses), were received from the contract laboratories, verified by the Weldon Spring Site verification group and merged into the database during the first quarter of 1999. KPA results for on-site total uranium analyses performed during first quarter 1999 are included. Air monitoring data presented are the most recent complete sets of quarterly data.

  7. Evaluation, engineering and development of advanced cyclone processes. Quarterly technical progress report No. 4, July 1, 1991--September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    ``Evaluation, Engineering and Development of Advanced Cyclone Processes`` is a research and development project for the reduction of pyritic sulfur in coal. Project goals are to remove 80 to 90% of the ash and pyritic sulfur while retaining 80 to 90% of the parent coal`s heating value. A number of media and media separator options are to be evaluated and tested, culminating with the implementation of the preferred combination in a 1,000 lb/hr bench-scale process optimization circuit.

  8. Technical Division quarterly progress report, October 1--December 31, 1977. [Fuel cycle research and development; special materials production

    Energy Technology Data Exchange (ETDEWEB)

    Slansky, C.M. (ed.)

    1978-02-01

    Results are presented on the fluidized-bed calcination of simulated radioactive waste from the reprocessing of spent commercial nuclear fuel and on the removal of actinide elements from the waste prior to calcination. Other programs include the development of storage technology for /sup 85/Kr waste; and the behavior of volatile radionuclides during the combustion of HTGR graphite-based fuel. The long-term management of defense waste from the ICPP covers post-calcination treatment of ICPP calcined waste; the removal of actinide elements from first-cycle raffinate; the retrieval and handling of calcined waste from ICPP storage vaults; and the preparation of the Programmatic Environmental Impact Statement on ICPP waste. Process improvements are reported on the Fluorinel headend process for Zircaloy-clad fuels and on uranium accountability measurements. Other development results cover the process for recovering spent Rover fuel, buried pipeline transfer systems, support to the Waste Management Program, Waste Calcining Facility support, New Waste Calcining Facility support, and effluent monitoring methods evaluation and development. In this category are studies on nuclear materials security, application of a liquid-solid fluidized-bed heat exchanger to the recovery of geothermal heat, inplant reactor source term measurements, burnup methods for fast breeder reactor fuels, absolute thermal fission yield measurements, analytical support to light water breeder reactor development, research on analytical methods, and the behavior of environmental species of iodine.

  9. Engineering development of advanced physical fine coal cleaning for premium fuel applications. Quarterly technical progress report 9, October 1, 1994--December 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Moro, N.; Shields, G.L.; Smit, F.J.; Jha, M.C. [AMAX Research and Development Center, Golden, CO (United States)

    1995-01-25

    The primary goal of this project is the engineering development of two advanced physical fine coal cleaning processes, column flotation and selective agglomeration, for premium fuel applications. The project scope includes laboratory research and bench-scale testing on six coals to optimize these processes, followed by design, and construction of a 2-t/hr process development unit (PDU). The PDU will then be operated to generate 200 ton lots of each of three project coals, by each process. The project began in October, 1992 and is scheduled for completion by March, 1997. During Quarter 9 (October--December, 1995), parametric and optimization testing was completed for the Taggart, Sunnyside, and Indiana VII coal using a 12-inch Microcel{trademark} flotation column. The detailed design of the 2-t/hr PDU grinding, flotation, and dewatering circuits neared completion with the specification of the major pieces of capital equipment to be purchased for these areas. Selective agglomeration test work investigated the properties of various industrial grades of heptane for use during bench- and PDU-scale testing. It was decided to use a hydrotreated grade of commercial heptane due to its low cost and low concentration of aromatic compounds. The final Subtask 6.4 CWF Formulation Studies Test Plan was issued. A draft version of the Subtask 6.5 Preliminary Design and Test Plan Report was also issued, discussing the progress made in the design of the bench-scale selective agglomeration unit. PDU construction work moved forward through the issuing of 26 request for quotations and 21 award packages for capital equipment.

  10. 3-D turbulent particle dispersion submodel development. Quarterly progress report No. 2, 15 July--15 October 1991

    Energy Technology Data Exchange (ETDEWEB)

    Smith, P.J.

    1991-12-31

    The lack of a mathematical description of the interactions of fluid turbulence with other physics-chemical processes is a major obstacle in modeling many industrial program. Turbulent two-phase flow is a phenomenon that is of significant practical importance to coal combustion as well as other disciplines. The interactions of fluid turbulence with the particulate phase has yet to be accurately and efficiently modeled for these industrial applications. On 15 May 1991 work was initiated to cover four major tasks toward the development of a computational submodel for turbulent particle dispersion that would be applicable to coal combustion simulations. Those four tasks are: 1. A critical evaluation of the 2-D Lagrangian particle dispersion submodel, 2. Development of a 3-D submodel for turbulent particle dispersion, 3. Evaluation of the 3-D submodel for turbulent particle dispersion, 4. Exploration of extensions of the Lagrangian dispersion theory to other applications including chemistry-turbulence interactions.

  11. Ocean Thermal Energy Conversion (OTEC) power system development conceptual design. First quarterly technical progress report, August 1-December 31, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Trimble, L. C.; Robidart, C. M.

    1978-01-01

    The Power System Development Project, Phase I, is to develop conceptual and preliminary designs utilizing state-of-the-art heat exchanger concepts for (1) the full sized (25 MWe nominal) closed-cycle ammonia power system module for the 100 MWe demonstration plant; and (2) the scaled 5 MWe (nominal) proof-of-concept power system and the 1 MWe heat exchangers (evaporator and condenser), representative of the 25 MWe design. The major issues for conceptual design are: heat exchanger thermal size and material, tube water-side fouling countermeasures, heat transfer enhancement technique, power system module power output size and availability and reliability, internal/external module configurations, and busbar power cost. The salient findings are given.

  12. High resolution, low cost solar cell contact development. Quarterly technical progress and schedule report, September 28, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Mardesich, N.

    1980-01-01

    The scope of the contract covers the development and evaluation of forming solar cell collector grid contacts by the MIDFILM process. This is a proprietary process developed by the Ferro Corporation which is a subcontractor for the program. The MIDFILM process attains line resolution characteristics of photoresist methods with processing related to screen printing. The surface to be processed is first coated with a thin layer of photoresist material. Upon exposure to ultraviolet light through a suitable mask, the resist in the non-pattern area cross-links and becomes hard. The unexposed pattern areas remain tacky. The conductor material is applied in the form of a dry mixture of metal and frit particles which adhere to the tacky pattern area. The assemblage is then fired to ash the photopolymer and sinter the fritted conductor powder. Effort was concentrated during this period on the establishment, optimization and identification of problem areas of the MIDFILM process. Progress is reported. (WHK)

  13. Advanced Turbine Systems (ATS) program conceptual design and product development. Quarterly progress report, December 1, 1995--February 29, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    This report describes the overall program status of the General Electric Advanced Gas Turbine Development program, and reports progress on three main task areas. The program is focused on two specific products: (1) a 70-MW class industrial gas turbine based on the GE90 core technology, utilizing a new air cooling methodology; and (2) a 200-MW class utility gas turbine based on an advanced GE heavy-duty machine, utilizing advanced cooling and enhancement in component efficiency. The emphasis for the industrial system is placed on cycle design and low emission combustion. For the utility system, the focus is on developing a technology base for advanced turbine cooling while achieving low emission combustion. The three tasks included in this progress report are on: conversion to a coal-fueled advanced turbine system, integrated program plan, and design and test of critical components. 13 figs., 1 tab.

  14. Develop silicone encapsulation systems for terrestrial silicon solar arrays. Fifth quarterly progress report, April 1-June 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-01

    This study is directed toward the development of a cost effective encapsulation system for photovoltaic modules using silicone based materials. Progress is reported under the headings (1) Weather-Ometer stressing vs weathering history of silicone and silicone modified materials, (2) thermal cycling stress test results, (3) dirt pickup and retention measured by outdoor exposure, (4) silicone-acrylic copolymers as encapsulants, and (5) cover films containing uv absorbers. (WHK)

  15. Peat Biogasification Development Program. Quarterly progress report No. 3, April 1-June 30, 1980. [Pretreatment; anaerobic fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Wise, D.L.

    1980-01-01

    Procedures for High Pressure Liquid Chromatography (HPLC) are under development that will identify and quantify fermentable material contained in pretreated peat liquors. Several of the model compounds hypothesized to be a product of peat pretreatment have been identified with HPLC and confirmed with Thin Layer Chromatography (TLC). However, there are numerous unknown peaks of other products for which elution times and extinction coefficients must be determined in order to make HPLC a quantitative analytical tool for kinetic data.

  16. Technology development for cobalt F-T catalysts. Quarterly technical progress report No. 5, October 1, 1993--December 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Singleton, A.H.

    1994-05-31

    The goal of this project is the development of a commercially viable, cobalt-based Fischer-Tropsch (F-T) catalyst for use in a slurry bubble column reactor. Cobalt-based catalysts have long been known as being active for F-T synthesis. They typically possess greater activity than iron-based catalysts, historically the predominant catalyst being used commercially for the conversion of syngas based on coal, but possess two disadvantages that somewhat lessen its value: (1) cobalt tends to make more methane than iron does, and (2) cobalt is less versatile with low H{sub 2}/CO ratio syngas due to its lack of water-gas shift activity. Therefore, the major objectives of this work are (1) to develop a cobalt-based F-T catalyst with low (< 5 %) methane selectivity, (2) to develop a cobalt-based F-T catalyst with water-gas shift activity, and (3) to combine both these improvements into one catalyst. It will be demonstrated that these catalysts have the desired activity, selectivity, and life, and can be made reproducibly. Following this experimental work, a design and a cost estimate will be prepared for a plant to produce sufficient quantities of catalyst for scale-up studies.

  17. A Quarter Century of TV Food Advertising Targeted at Children.

    Science.gov (United States)

    Gamble, Margaret; Cotugna, Nancy

    1999-01-01

    Analyzed current trends in television advertising targeting children, comparing results to the historical perspective of the last quarter century. Researchers evaluated 16 hours of Saturday morning children's programming on four network channels for commercial content based on Food Guide Pyramid and USDA Child Nutrition criteria. Overall,…

  18. Advanced Turbine System (ATS) program conceptual design and product development. Quarterly report, September, 1--November 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    GE has achieved a leadership position in the worldwide gas turbine industry in both industrial/utility markets and in aircraft engines. This design and manufacturing base plus our close contact with the users provides the technology for creation of the next generation advanced power generation systems for both the industrial and utility industries. GE has been active in the definition of advanced turbine systems for several years. These systems will leverage the technology from the latest developments in the entire GE gas turbine product line. These products will be USA-based in engineering and manufacturing and are marketed through GE Power Systems. Achieving the Advanced Turbine Systems (ATS) goals of 60% efficiency, single-digit NOx, and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both the efficiency and cost goals. However, higher temperatures move in the direction of increased NOx emissions. Improved coatings and other materials technologies along with creative combustor design can result in solutions which will achieve the ultimate goal. GE`s view of the market, in conjunction with the industrial and utility objectives, requires the development of Advanced Gas Turbine Systems which encompass two potential products: a new aeroderivative combined-cycle system for the industrial market, and a combined-cycle system for the utility sector that is based on an advanced frame machine.

  19. Development of alternative fuels from coal-derived syngas. Quarterly status report No. 6, January 1--March 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Brown, D.M.

    1992-05-19

    The overall objectives of this program are to investigate potential technologies for the conversion of coal-derived synthesis gas to oxygenated fuels, hydrocarbon fuels, fuel intermediates, and octane enhancers; and to demonstrate the most promising technologies at DOE`s LaPorte, Texas, Slurry Phase Alternative Fuels Development Unit (AFDU). BASF continues to have difficulties in scaling-up the new isobutanol synthesis catalyst developed in Air Products` laboratories. Investigations are proceeding, but the proposed operation at LaPorte in April is now postponed. DOE has accepted a proposal to demonstrate Liquid Phase Shift (LPS) chemistry at LaPorte as an alternative to isobutanol. There are two principal reasons for carrying out this run. First, following the extensive modifications at the site, operation on a relatively ``benign`` system is needed before we start on Fischer-Tropsch technology in July. Second, use of shift catalyst in a slurry reactor will enable DOE`s program on coal-based Fischer-Tropsch to encompass commercially available cobalt catalysts-up to now they have been limited to iron-based catalysts which have varying degrees of shift activity. In addition, DOE is supportive of continued fuel testing of LaPorte methanol-tests of MIOO at Detroit Diesel have been going particularly well. LPS offers the opportunity to produce methanol as the catalyst, in the absence of steam, is active for methanol synthesis.

  20. Develop silicone encapsulation systems for terrestrial silicon solar arrays. First quarterly progress report, February 15, 1978--June 30, 1978

    Energy Technology Data Exchange (ETDEWEB)

    1978-07-10

    This study is directed toward the development of a cost effective encapsulation system for photovoltaic modules using silicone based materials. This is a cooperative effort between Dow Corning, the major supplier of silicones and silicone intermediates, and Spectrolab a leading photovoltaic array manufacturer. The total contract effort has been divided into four tasks: technology review, generation of screening concepts, assessment of encapsulation concepts, and evaluation of encapsulation concepts. A review of technology pertinent to the use and weatherability of silicone based materials and a plan for screening encapsulation concepts are presented. The technology review covered: the performance of clear silicones in weathering and stress environments, photovoltaic industry experience with silicone materials used in photovoltaic systems, and silicones used in the protection of electronic devices.

  1. Ion channels, guidance molecules, intracellular signaling and transcription factors regulating nervous and vascular system development.

    Science.gov (United States)

    Akita, Tenpei; Kumada, Tatsuro; Yoshihara, Sei-ichi; Egea, Joaquim; Yamagishi, Satoru

    2016-03-01

    Our sophisticated thoughts and behaviors are based on the miraculous development of our complex nervous network system, in which many different types of proteins and signaling cascades are regulated in a temporally and spatially ordered manner. Here we review our recent attempts to grasp the principles of nervous system development in terms of general cellular phenomena and molecules, such as volume-regulated anion channels, intracellular Ca(2+) and cyclic nucleotide signaling, the Npas4 transcription factor and the FLRT family of axon guidance molecules. We also present an example illustrating that the same FLRT family may regulate the development of vascular networks as well. The aim of this review is to open up new vistas for understanding the intricacy of nervous and vascular system development.

  2. Preferential targeting of Nav1.6 voltage-gated Na+ Channels to the axon initial segment during development.

    Directory of Open Access Journals (Sweden)

    Elizabeth J Akin

    Full Text Available During axonal maturation, voltage-gated sodium (Nav channels accumulate at the axon initial segment (AIS at high concentrations. This localization is necessary for the efficient initiation of action potentials. The mechanisms underlying channel trafficking to the AIS during axonal development have remained elusive due to a lack of Nav reagents suitable for high resolution imaging of channels located specifically on the cell surface. Using an optical pulse-chase approach in combination with a novel Nav1.6 construct containing an extracellular biotinylation domain we demonstrate that Nav1.6 channels are preferentially inserted into the AIS membrane during neuronal development via direct vesicular trafficking. Single-molecule tracking illustrates that axonal channels are immediately immobilized following delivery, while channels delivered to the soma are often mobile. Neither a Nav1.6 channel lacking the ankyrin-binding motif nor a chimeric Kv2.1 channel containing the Nav ankyrinG-binding domain show preferential AIS insertion. Together these data support a model where ankyrinG-binding is required for preferential Nav1.6 insertion into the AIS plasma membrane. In contrast, ankyrinG-binding alone does not confer the preferential delivery of proteins to the AIS.

  3. Advanced Turbine Systems (ATS) program conceptual design and product development. Quarterly report, December 1, 1993--February 28, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    GE has achieved a leadership position in the worldwide gas turbine industry in both industrial/utility markets and in aircraft engines. This design and manufacturing base plus our close contact with the users provides the technology for creation of the next generation advanced power generation systems for both the industrial and utility industries. GE has been active in the definition of advanced turbine systems for several years. These systems will leverage the technology from the latest developments in the entire GE gas turbine product line. These products will be USA based in engineering and manufacturing and are marketed through the GE Industrial and Power Systems. Achieving the advanced turbine system goals of 60% efficiency, 8 ppmvd NOx and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NOx emission. Improved coating and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal.

  4. Process development for automated solar cell and module production. Task 4: automated array assembly. Quarterly report No. 1

    Energy Technology Data Exchange (ETDEWEB)

    Witham, C.R.

    1978-04-18

    The objective of this program is to determine the state-of-the-art and to develop some of the technology required to allow for large volume and low cost terrestrial solar panel production. The baseline production facility being studied would provide for production of 200 megawatts of solar panels per year from an input commodity as sawn Czochralski wafers. Initial analysis of available automation equipment applicable to the 1986 goals shows that most of the equipment will have to be of special design. The currently available equipment is designed for the semiconductor industry where process volumes are low. Maximum speeds are of the range of 100 to 200 wafers per hour. Using special equipment it appears feasible to produce the solar cells with 6 to 8 parallel production lines operating three shifts per day, seven days per week and to produce the encapsulated modules with 1 to 3 parallel production lines. Preliminary costs analyses show promise for reaching the 1986 price goals assuming a SAMICS wafer price of $0.28/wafer (1986 dollars). Initial work has been done to study the applicability of a plasma process to perform back etch of the cells. This area shows promise for eliminating wet chemical etching procedures with attendant rinse and dry equipment and time required.

  5. [ADVANCE: America`s economic Development Venture for Area Neighborhoods, Communities, and Enterprises]. Quarterly progress report -- Year two

    Energy Technology Data Exchange (ETDEWEB)

    McDavid, R.A.

    1998-12-01

    The US Department of Energy (DOE) has a mission to foster a secure and reliable energy system that is environmentally and economically sustainable, to be a responsible steward of the Nation`s nuclear weapons, to clean up decommissioned facilities, and to support continued US leadership in science and technology. To effectively utilize and integrate its mission, DOE has created the Regional Environmental Technology and Business Development Office (RETBDO) serving as a Community Reuse Organization, a stakeholder organization, which represents interests and economic concerns of communities surrounding DOE sites that are being closed or reconfigured. RETBDO is a branch office of ADVANCE, a 501(c) (3) non-profit organization established in 1994. The mission of RETBDO is to diversify the economy by creating an environment conductive to improve the representation of minorities and small businesses in the region and to assure fair business participation in major environmental decision-making, technology based start-ups, expansion management, and the attractive of new ventures to the Southwest region, including, bu not limited to, California, Nevada, Utah, Colorado, Arizona, New Mexico, and Texas. This report describes the RETBDO program and its implementation.

  6. Development and application of analytical techniques to chemistry of donor solvent liquefaction. Quarterly progress report, April 1980-June 1980

    Energy Technology Data Exchange (ETDEWEB)

    Dorn, H. C.; Taylor, L. T.

    1980-10-01

    In this report we focus on our continuing efforts to develop new fluorine reagents useful for characterizing heteroatom (e.g., O, N and S) containing organic compounds present in coal and/or other fuel fractions. Although the utility of trifluoroacetyl chloride and trifluorodiazoethane as fluorine tagging reagents for studies of this type have been previously discussed, we describe further techniques utilizing these reagents which are under present study. It should be mentioned that the advantage of the fluorine tagging approach is the high sensitivity of the /sup 19/F nuclide to NMR detection and the high sensitivity of the /sup 19/F chemical shift parameter to subtle changes in molecular structure. Recently, workers at Exxon have reported the use of a silicon tagging reagent utilizing /sup 29/Si NMR to characterize various heteroatom containing organic moieties present in fuel samples. Silicon containing reagents have some of the same advantages as fluorine reagents. Namely the low levels of either fluorine or silicon in most samples of interest avoid obvious spectral background problems associated with hydrogen or carbon tagging reagents. Furthermore, like /sup 19/F, /sup 29/Si chemical shifts would be expected to be sensitive to subtle changes in molecular structure, however /sup 29/Si suffers from low NMR sensitivity.

  7. An effect of entrance length on development of velocity profile in channel of millimeter dimensions

    Science.gov (United States)

    Jasikova, D.; Kotek, M.; Kopecky, V.

    2016-06-01

    Here we used modified PIV technique completed with long distance microscope probe for experimental investigation of the flow velocity profile in a rectangular duct. We came from the analytical and numerical prediction of the entrance length for fully developed velocity profile. The results of measurement completed knowledge about the flow stability and velocity profile shape in the channel of 0.00375 hydraulic diameters. There was marked a range of entrance length constant for the transient flow area. The presents of the fluctuating velocities in the transition flow is explained with POD snapshot and modes projection. The minimal entrance length for the laminar, transition, and turbulent flow is set.

  8. Development and application of analytical techniques to chemistry of donor solvent liquefaction. Quarterly progress report, October 1980-December 1980

    Energy Technology Data Exchange (ETDEWEB)

    Dorn, H. C.; Taylor, L. T.

    1981-04-01

    The LC-ICP interface which can simultaneously detect (ICP) and speciate (LC) up to 34 elements at concentrations between 10 ppM and 0.5 ppB depending on the element and the matrix has been developed. A variety of organic matrices have been successfully used. Preliminary experiments using this interface have monitored 15 elements simultaneously (Al, Ca, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Mo, Ni, Ti, V and Zn). The mode of separation of process derived coal liquefaction solvents and Amax solvent refined coal has been size exclusion chromatography. The metals present in a process solvent obtained from the SRC Wilsonville, AL facility and metal distribution according to effective molecular size are presented. Very low levels of Mg, Mn, Ti, Cd and Hg are observed. Of the elements which were monitored, Cr surprisingly exhibits the largest concentration unlike the other coal-derived materials which have been examined via LC-ICP. The source of Cr in this case may well be from corrosion of the reactor equipment. Both Cr and Fe show a similar molecular size distribution with most of the material eluting near the totally excluded volume. Cu and Zn, on the other hand, show a much smaller size distribution with Cu having at least two groups of sized species; while, Zn appears to be incorporated in a relatively small number of single sized species. The remainder of the elements monitored did not show detectable peaks above ambient noise level. A moderately hydrotreated process solvent that had been previously separated into four distillation ranges: IBP (initial boiling point) -800/sup 0/F, 400 to 800/sup 0/F, 400 to 600/sup 0/F and 600 to 800/sup 0/F was subjected to SEC-ICP using pyridine as the eluting medium. Size exclusion chromatographic metallograms are presented for calcium, magnesium, titanium, iron, copper and zinc.

  9. Numerical simulations of developing flow and vortex street in a rectangular channel with a cylindrical core

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Dongil [Department of Mechanical Engineering, University of Ottawa, 161 Louis Pasteur, Ottawa, Ontario, K1N 6N5 (Canada); Tavoularis, Stavros, E-mail: stavros.tavoularis@uottawa.ca [Department of Mechanical Engineering, University of Ottawa, 161 Louis Pasteur, Ottawa, Ontario, K1N 6N5 (Canada)

    2012-02-15

    Highlights: Black-Right-Pointing-Pointer LES are more accurate than URANS for rod bundle flows. Black-Right-Pointing-Pointer URANS are still an acceptable choice. Black-Right-Pointing-Pointer Steady RANS analysis is very inaccurate in narrow gap regions. Black-Right-Pointing-Pointer Streamwise-periodic boundary conditions are not suitable for practical rod bundles. Black-Right-Pointing-Pointer Gap instability is an inviscid process. - Abstract: Three-dimensional, unsteady simulations of developing turbulent flows in a rectangular channel containing a cylindrical rod have been performed to investigate their sensitivity to the choices of boundary conditions and turbulence models. Among all methods, large eddy simulations, employed in a downstream sub-domain of the channel as part of the segregated hybrid model, reproduced most accurately the experimental results. However, unsteady Reynolds-averaged Navier-Stokes (URANS) simulations with a Reynolds stress model appear to be also an acceptable choice for approximate rod bundle analyses, making fairly accurate predictions at a much lower computational cost. In agreement with previous findings, steady RANS simulations are not recommended as a low-cost substitute of URANS for flows in tightly packed rod bundles. The URANS simulations were found to be insensitive to inlet turbulence specification and to be more accurate when a uniform inlet velocity was specified rather than a fully developed inlet velocity distribution. Developing flow simulations were found to be preferable to simulations with a streamwise-periodic boundary condition. Finally, unsteady inviscid (Euler) simulations with a fully developed initial velocity distribution predicted the onset of gap instability, but were otherwise found to be unsuitable for practical analysis of rod bundle flows.

  10. Development of Pre-set Counter-rotating Streamwise Vortices in Wavy Channel

    KAUST Repository

    Budiman, A.C.

    2015-10-23

    Development of counter-rotating streamwise vortices in a rectangular channel with one-sided wavy surface has been experimentally quantified using hot-wire anemometry. The wavy surface has fixed amplitude of 3.75 mm. The counter-rotating vortices are pre-set by means of a sawtooth pattern cut at the leading edge of the wavy surface. Variations of the central streamwise velocity Uc with a channel gap H = 35 mm and 50 mm (corresponding to a Reynolds number from 1600 to 4400) change the instability of the flow which can be distinguished from the velocity contours at a certain spanwise plane. The streamwise velocity contours and turbulence intensity for Reynolds number Re = 3100 and H = 35 mm show the disappearance of the mushroom-like vortices prior to turbulence near the second peak of the wavy surface, while for higher Re, this phenomenon occurs earlier. Under certain conditions, for example, for Re = 4400 and H = 50 mm, the splitting of the vortices can also be observed.

  11. Glucocorticoids Distinctively Modulate the CFTR Channel with Possible Implications in Lung Development and Transition into Extrauterine Life.

    Directory of Open Access Journals (Sweden)

    Mandy Laube

    Full Text Available During fetal development, the lung is filled with fluid that is secreted by an active Cl- transport promoting lung growth. The basolateral Na+,K+,2Cl- cotransporter (NKCC1 participates in Cl- secretion. The apical Cl- channels responsible for secretion are unknown but studies suggest an involvement of the cystic fibrosis transmembrane conductance regulator (CFTR. CFTR is developmentally regulated with a high expression in early fetal development and a decline in late gestation. Perinatal lung transition is triggered by hormones that stimulate alveolar Na+ channels resulting in fluid absorption. Little is known on how hormones affect pulmonary Cl- channels. Since the rise of fetal cortisol levels correlates with the decrease in fetal CFTR expression, a causal relation may be assumed. The aim of this study was to analyze the influence of glucocorticoids on pulmonary Cl- channels. Alveolar cells from fetal and adult rats, A549 cells, bronchial Calu-3 and 16HBE14o- cells, and primary rat airway cells were studied with real-time quantitative PCR and Ussing chambers. In fetal and adult alveolar cells, glucocorticoids strongly reduced Cftr expression and channel activity, which was prevented by mifepristone. In bronchial and primary airway cells CFTR mRNA expression was also reduced, whereas channel activity was increased which was prevented by LY-294002 in Calu-3 cells. Therefore, glucocorticoids strongly reduce CFTR expression while their effect on CFTR activity depends on the physiological function of the cells. Another apical Cl- channel, anoctamin 1 showed a glucocorticoid-induced reduction of mRNA expression in alveolar cells and an increase in bronchial cells. Furthermore, voltage-gated chloride channel 5 and anoctamine 6 mRNA expression were increased in alveolar cells. NKCC1 expression was reduced by glucocorticoids in alveolar and bronchial cells alike. The results demonstrate that glucocorticoids differentially modulate pulmonary Cl

  12. Glucocorticoids Distinctively Modulate the CFTR Channel with Possible Implications in Lung Development and Transition into Extrauterine Life.

    Science.gov (United States)

    Laube, Mandy; Bossmann, Miriam; Thome, Ulrich H

    2015-01-01

    During fetal development, the lung is filled with fluid that is secreted by an active Cl- transport promoting lung growth. The basolateral Na+,K+,2Cl- cotransporter (NKCC1) participates in Cl- secretion. The apical Cl- channels responsible for secretion are unknown but studies suggest an involvement of the cystic fibrosis transmembrane conductance regulator (CFTR). CFTR is developmentally regulated with a high expression in early fetal development and a decline in late gestation. Perinatal lung transition is triggered by hormones that stimulate alveolar Na+ channels resulting in fluid absorption. Little is known on how hormones affect pulmonary Cl- channels. Since the rise of fetal cortisol levels correlates with the decrease in fetal CFTR expression, a causal relation may be assumed. The aim of this study was to analyze the influence of glucocorticoids on pulmonary Cl- channels. Alveolar cells from fetal and adult rats, A549 cells, bronchial Calu-3 and 16HBE14o- cells, and primary rat airway cells were studied with real-time quantitative PCR and Ussing chambers. In fetal and adult alveolar cells, glucocorticoids strongly reduced Cftr expression and channel activity, which was prevented by mifepristone. In bronchial and primary airway cells CFTR mRNA expression was also reduced, whereas channel activity was increased which was prevented by LY-294002 in Calu-3 cells. Therefore, glucocorticoids strongly reduce CFTR expression while their effect on CFTR activity depends on the physiological function of the cells. Another apical Cl- channel, anoctamin 1 showed a glucocorticoid-induced reduction of mRNA expression in alveolar cells and an increase in bronchial cells. Furthermore, voltage-gated chloride channel 5 and anoctamine 6 mRNA expression were increased in alveolar cells. NKCC1 expression was reduced by glucocorticoids in alveolar and bronchial cells alike. The results demonstrate that glucocorticoids differentially modulate pulmonary Cl- channels and are likely

  13. 20 CFR 404.146 - When a calendar quarter cannot be a quarter of coverage.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false When a calendar quarter cannot be a quarter...-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Insured Status and Quarters of Coverage Quarters of Coverage § 404.146 When a calendar quarter cannot be a quarter of coverage. This section applies when...

  14. Activation of steroid-sensitive TRPM3 channels potentiates glutamatergic transmission at cerebellar Purkinje neurons from developing rats.

    Science.gov (United States)

    Zamudio-Bulcock, Paula A; Everett, Julie; Harteneck, Christian; Valenzuela, C Fernando

    2011-11-01

    The functional implications of transient receptor potential melastatin 3 (TRPM3) activation, the most recently described member of the melastatin subfamily of cation permeable TRP channels, have begun to be elucidated in recent years. The discovery of TRPM3 activation by the steroid pregnenolone sulfate (PregS) has shed new light on the physiological role of this channel. For example, TRPM3 activation enhances insulin secretion from β pancreatic cells, induces contraction of vascular smooth muscle, and is also involved in the detection of noxious heat. Although TRPM3 expression has been detected in several regions of the developing and mature brain, little is known about the roles of TRPM3 in brain physiology. In this study, we demonstrate the abundant expression of TRPM3 steroid-sensitive channels in the developing cerebellar cortex. We also show that TRPM3-like channels are expressed at glutamatergic synapses in neonatal Purkinje cells. We recently showed that PregS potentiates spontaneous glutamate release onto neonatal Purkinje cells during a period of active glutamatergic synapse formation; we now show that this effect of PregS is mediated by TRPM3-like channels. Mefenamic acid, a recently discovered TRPM3 antagonist, blocked the effect of PregS on glutamate release. The PregS effect on glutamate release was mimicked by other TRPM3 agonists (nifedipine and epipregnanolone sulfate) but not by a TRMP3-inactive steroid (progesterone). Our findings identify TRPM3 channels as novel modulators of glutamatergic transmission in the developing brain.

  15. Development and evaluation of a four-channel digital flash X-ray imaging system

    CERN Document Server

    Wang Yi; Du Hong Lian; Li Yuan Jing; Tian Hui

    2003-01-01

    A four-channel digital flash X-ray imaging system has been developed in our lab. The four flash X-ray heads and four detectors can be used to obtain four radiographic images at four time intervals of an explosion and ballistic trajectory. The cascaded imaging system mainly consists of three parts: (1) a phosphor screen to convert incident X-rays into visible photons; (2) a lens to efficiently collect visible photons emitted by the phosphor screen; and (3) a charge coupled device image sensor to obtain the visible light image. From the analysis of signal and noise propagation, the system is not X-ray quantum-limited, rather the system has secondary quantum sink at the light collecting stage. The construction of the system, theoretical and experimental analysis of performance are presented.

  16. Thermally developing forced convection and the corresponding thermal stresses in a porous plate channel

    Institute of Scientific and Technical Information of China (English)

    YANG Xiao; LIU Xuemei

    2007-01-01

    Based on the Darcy fluid model, by considering the effects of viscous dissipation due to the interaction between solid skeleton and pore fluid flow and thermal conduction in the direction of the fluid flow, the thermally developing forced convection of the local thermal equili- brium and the corresponding thermal stresses in a semi- infmite saturated porous plate channel are investigated in this paper. The expressions of temperature, local Nusselt number and corresponding thermal stresses are obtained by means of the Fourier series, and the distributions of the same are also shown. Furthermore, influences of the Péclet number (Pe) and Brinkman number (Br) on temperature, Nusselt number (Nu) and thermal stress are revealed numerically.

  17. A monosaccharide transporter is localized to sieve plate and plasmodesmal channel in developing apple fruit

    Institute of Scientific and Technical Information of China (English)

    ZHANG Lingyun; PENG Changcao; ZOU Keqin; WANG Xiuling; FAN Renchun; YU Xiangchun; ZHANG Xiaoyan; SHEN Yuanyue; ZHANG Dapeng

    2005-01-01

    Two major classes of plant sugar transporters, sucrose and monosaccharide transporters, may be localized to tonoplast or plasma membrane. The monosaccharide transporters may also be localized in plastid. However, whether these transporters reside in other subcellular compartments remains unclear. We recently detected in apple fruit a 52 kD plasma membrane-localized monosaccharide transporter, and showed that this transporter may be functional in phloem unloading in the fruit. In this paper, we report that this monosaccharide transporter is also localized to sieve plate and plasmodesmal channel in apple fruit. The amount of this sieve plate- and plasmodesma-associated transporter changes during fruit development. This amount of the transporter expression may be altered in the phloem sieve elements but not in the parenchyma cells by a photoassimilate deficiency applied by the shoot girdling treatment, suggesting that the monosaccharide transporter of the special sub-cellular localization may be of biological significance.

  18. The influence of log jam development on channel morphology in an intermediate sized coastal stream, Carnation Creek, B.C.

    Science.gov (United States)

    Luzi, D. S.; Sidle, R. C.; Hogan, D. L.

    2006-12-01

    Large wood (LW) is an important functional and structural component of forest stream ecosystems, regulating sediment storage and transport, consequently determining channel morphology, and as an important foundation for aquatic habitat. LW occurs as either individual pieces or in accumulations (log jams). Where individual pieces of LW affect the stream at a small scale, several bankfull widths, jams influence the stream on a much larger scale. The spatial extent of jam related effects on channel morphology vary, dependent upon the life stage of the jam. Temporal changes in jams have received relatively little attention in the literature. The development stage of a jam is associated with upstream channel aggradation and downstream degradation; this process reverses during a jam's deterioration phase. Carnation Creek, an 11 km2 watershed located on the west coast of Vancouver Island, provided a rare opportunity to examine both the spatial and temporal impacts of log jams on channel morphology. An understanding of these relationships will be developed through the analysis of changes in channel variables, such as channel dimensions, pattern, hydraulic characteristics, and morphology. These characteristics will be extracted from annual cross sectional surveys taken during 1971 - 1998.

  19. tassel-less1 encodes a boron channel protein required for inflorescence development in maize.

    Science.gov (United States)

    Leonard, April; Holloway, Beth; Guo, Mei; Rupe, Mary; Yu, GongXin; Beatty, Mary; Zastrow-Hayes, Gina; Meeley, Robert; Llaca, Victor; Butler, Karlene; Stefani, Tony; Jaqueth, Jennifer; Li, Bailin

    2014-06-01

    tassel-less1 (tls1) is a classical maize (Zea mays) inflorescence mutant. Homozygous mutant plants have no tassels or very small tassels, and ear development is also impaired. Using a positional cloning approach, ZmNIP3;1 (a NOD26-like intrinsic protein) was identified as the candidate gene for tls1. The ZmNIP3;1 gene is completely deleted in the tls1 mutant genome. Two Mutator-insertional TUSC alleles of ZmNIP3;1 exhibited tls1-like phenotypes, and allelism tests confirmed that the tls1 gene encodes ZmNIP3;1. Transgenic plants with an RNA interference (RNAi) construct to down-regulate ZmNIP3;1 also showed tls1-like phenotypes, further demonstrating that TLS1 is ZmNIP3;1. Sequence analysis suggests that ZmNIP3;1 is a boron channel protein. Foliar application of boron could rescue the tls1 phenotypes and restore the normal tassel and ear development. Gene expression analysis indicated that in comparison with that of the wild type or tls1 plants treated with boron, the transition from the vegetative to reproductive phase or the development of the floral meristem is impaired in the shoot apical meristem of the tls1 mutant plants. It is concluded that the tls1 mutant phenotypes are caused by impaired boron transport, and boron is essential for inflorescence development in maize.

  20. Catalyst and process development for hydrogen preparation from future fuel cell feedstocks. Quarterly report, April 1-June 30, 1980. [Pt/Pd

    Energy Technology Data Exchange (ETDEWEB)

    Yarrington, R M; Feins, I R; Hwang, H S

    1980-07-01

    Phase II of the contract, which involved catalyst preparation and evaluation, was nearly completed this quarter. Phase III, which calls for the design and construction of a fuel processor, was started. During the quarter, four types of tests were run on the small scale catalyst screening unit. The operating line for coke-free operations was found to be approximately between 0.41 to 0.44 O/sub 2//C level. Screening at lower O/sub 2//C levels led to problems with plugging. In other tests, increased severity for screening steam reforming catalysts was obtained by doubling the space velocity. Another series of tests were run to determine the gas composition from the catalytic partial oxidation (CPO) section and to evaluate two CPO catalysts. In the other series of tests, catalysts were aged for about 20 hours using a propane, steam, and air mixture before testing with No. 2 oil for another five hours. This latter test has been used to study Pt/Rh catalysts made with various supports. Differences were readily determined for Pt/Rh supported on alpha alumina and Pt/Rh supported on stabilized alumina. This test method will find continued use in evaluating metal-support interactions. Several samples must be evaluated by this method before aging runs are made in the larger unit. After leaching alumina from a used Pt/Rh catalyst, the x-ray diffraction pattern showed the presence of a Pt-Rh alloy in the metal residue. Experiments were run to show that the alloy was formed in the reactor during testing and not during catalyst preparation. A larger version of the ATR reactor has been designed and major components are on order. Completion of the construction phase is scheduled for the next quarter.

  1. The mutant Moonwalker TRPC3 channel links calcium signaling to lipid metabolism in the developing cerebellum.

    Science.gov (United States)

    Dulneva, Anna; Lee, Sheena; Oliver, Peter L; Di Gleria, Katalin; Kessler, Benedikt M; Davies, Kay E; Becker, Esther B E

    2015-07-15

    The Moonwalker (Mwk) mouse is a model of dominantly inherited cerebellar ataxia caused by a gain-of-function mutation in the transient receptor potential (TRP) channel TRPC3. Here, we report impairments in dendritic growth and synapse formation early on during Purkinje cell development in the Mwk cerebellum that are accompanied by alterations in calcium signaling. To elucidate the molecular effector pathways that regulate Purkinje cell dendritic arborization downstream of mutant TRPC3, we employed transcriptomic analysis of developing Purkinje cells isolated by laser-capture microdissection. We identified significant gene and protein expression changes in molecules involved in lipid metabolism. Consistently, lipid homeostasis in the Mwk cerebellum was found to be disturbed, and treatment of organotypic cerebellar slices with ceramide significantly improved dendritic outgrowth of Mwk Purkinje cells. These findings provide the first mechanistic insights into the TRPC3-dependent mechanisms, by which activated calcium signaling is coupled to lipid metabolism and the regulation of Purkinje cell development in the Mwk cerebellum.

  2. Potential Roles of Amiloride-Sensitive Sodium Channels in Cancer Development

    Directory of Open Access Journals (Sweden)

    Siguang Xu

    2016-01-01

    Full Text Available The ENaC/degenerin ion channel superfamily includes the amiloride-sensitive epithelial sodium channel (ENaC and acid sensitive ionic channel (ASIC. ENaC is a multimeric ion channel formed by heteromultimeric membrane glycoproteins, which participate in a multitude of biological processes by mediating the transport of sodium (Na+ across epithelial tissues such as the kidney, lungs, bladder, and gut. Aberrant ENaC functions contribute to several human disease states including pseudohypoaldosteronism, Liddle syndrome, cystic fibrosis, and salt-sensitive hypertension. Increasing evidence suggests that ion channels not only regulate ion homeostasis and electric signaling in excitable cells but also play important roles in cancer cell behaviors such as proliferation, apoptosis, invasion, and migration. Indeed, ENaCs/ASICs had been reported to be associated with cancer characteristics. Given their cell surface localization and pharmacology, pharmacological strategies to target ENaC/ASIC family members may be promising cancer therapeutics.

  3. Fusion Power Program. Quarterly progress report, October--December 1978

    Energy Technology Data Exchange (ETDEWEB)

    1979-04-01

    This quarterly report summarizes the Argonne National Laboratory work performed for the Office of Fusion Energy during the October--December 1978 quarter in the following research and development areas: materials; energy storage and transfer; tritium containment, recovery and control; advanced reactor design; atomic data; reactor safety; fusion-fission hybrid systems; alternate applications of fusion energy; and other work related to fusion power. Three separate abstracts were prepared for the included sections. (MOW)

  4. Development of bipolar plates with different flow channel configurations for fuel cells

    Science.gov (United States)

    Boddu, Rajesh; Marupakula, Uday Kumar; Summers, Benjamin; Majumdar, Pradip

    Bipolar plates include separate gas flow channels for anode and cathode electrodes of a fuel cell. These gases flow channels supply reactant gasses as well as remove products from the cathode side of the fuel cell. Fluid flow, heat and mass transport processes in these channels have significant effect on fuel cell performance, particularly to the mass transport losses. The design of the bipolar plates should minimize plate thickness for low volume and mass. Additionally, contact faces should provide a high degree of surface uniformity for low thermal and electrical contact resistances. Finally, the flow fields should provide for efficient heat and mass transport processes with reduced pressure drops. In this study, bipolar plates with different serpentine flow channel configurations are analyzed using computational fluid dynamics modeling. Flow characteristics including variation of pressure in the flow channel across the bipolar plate are presented. Pressure drop characteristics for different flow channel designs are compared. Results show that with increased number of parallel channels and smaller sizes, a more effective contact surface area along with decreased pressured drop can be achieved. Correlations of such entrance region coefficients will be useful for the PEM fuel cell simulation model to evaluate the affects of the bipolar plate design on mass transfer loss and hence on the total current and power density of the fuel cell.

  5. Quail Egg compared to a quarter

    Science.gov (United States)

    2003-01-01

    Quail eggs are small (shown here with a quarter for scale) and develop quickly, making them ideal for space experiments. The Avian Development Facility (ADF) supports 36 eggs in two carousels (below), one of which rotates to provide a 1-g control for comparing to eggs grown in microgravity. The ADF originated in NASA's Shuttle Student Involvement program in the 1980s and was developed under the NASA Small Business Irnovation Research program. In late 2001, the ADF made its first flight and carried eggs used in two investigations, Development and function of the inner-ear balance system in normal and altered gravity environments, and Skeletal development in embryonic quail.

  6. Molecular Mechanism that Leads to Development of Epilepsy by a Sodium Channel Mutation

    OpenAIRE

    Velazquez, Eric

    2014-01-01

    The number of mutations in the voltage-gated sodium channel Nav1.1, encoded by SCN1A, that have been associated with genetic epilepsy is extremely high compared to the other sodium channel genes. The crucial function of the voltage-gated sodium channels in the central nervous system (CNS) is to regulate the influx of sodium or sodium current into the neurons. Sodium currents are required for the generation and propagation of action potentials. Subsequently the action potentials cause the rele...

  7. Development of a novel automated ion channel recording method using "inside-out" whole-cell membranes.

    Science.gov (United States)

    Vasilyev, Dmitry V; Merrill, Thomas L; Bowlby, Mark R

    2005-12-01

    Efforts to develop novel methods for recording from ion channels have been receiving increased attention in recent years. In this study, the authors report a unique "inside-out" whole-cell configuration of patch-clamp recording that has been developed. This method entails adding cells into a standard patch pipette and, with positive pressure, obtaining a gigaseal recording from a cell at the inside tip of the electrode. In this configuration, the cell may be moved through the air, first rupturing part of the cellular membrane and enabling bath access to the intracellular side of the membrane, and then into a series of wells containing differing solutions, enabling robotic control of all the steps in an experiment. The robotic system developed here fully automates the electrophysiological experiments, including gigaseal formation, obtaining whole-cell configuration, data acquisition, and drug application. Proof-of-principle experiments consisting of application of intracellularly acting potassium channel blockers to K+ channel cell lines resulted in a very rapid block, as well as block reversal, of the current. This technique allows compound application directly to the intracellular side of ion channels and enables the dissociation of compound in activities due to cellular barrier limitations. This technique should allow for parallel implementation of recording pipettes and the future development of larger array-based screening methods.

  8. DEPTH-INTEGRATED MODELING FOR AGGRADING/DEGRADING MOBILE CHANNELS I: MODEL DEVELOPMENT

    Institute of Scientific and Technical Information of China (English)

    En-Tian LIN; Chih-Tsung HSU; Keh-Chia YEH

    2006-01-01

    A depth-integrated model has been developed to simulate the alluvial process of channel bed under overloading and under-loading sediment discharge conditions. The hydrodynamic sub-model based on the explicit-finite-analytic method is used to obtain the flow field. Then the sediment transport modes, including the bed-load and suspended load, are modeled with the aid of the empirically auxiliary relations. In the depth-integrated model, the sediment exchange rate is treated as a source term specified at the reference level, rather than a boundary condition as usually adopted in vertical 2-D or 3-D models. The deposition or erosion rate of the bed is then determined by comparing the flow-laden suspended-sediment concentration profile against the equilibrium concentration profile, and their difference is used to compute the sediment exchange rate for a given time interval. Assessment of the good accuracy of the proposed model is demonstrated by using van Rijn's (1981) experiment for the case of clear water passing a movable bed. In the companion paper, the verification and the field application of the proposed model are presented.

  9. Development of the analog ASIC for multi-channel readout X-ray CCD camera

    CERN Document Server

    Nakajima, Hiroshi; Idehara, Toshihiro; Anabuki, Naohisa; Tsunemi, Hiroshi; Doty, John P; Ikeda, Hirokazu; Katayama, Haruyoshi; Kitamura, Hisashi; Uchihori, Yukio; 10.1016/j.nima.2010.12.174

    2011-01-01

    We report on the performance of an analog application-specific integrated circuit (ASIC) developed aiming for the front-end electronics of the X-ray CCDcamera system onboard the next X-ray astronomical satellite, ASTRO-H. It has four identical channels that simultaneously process the CCD signals. Distinctive capability of analog-to-digital conversion enables us to construct a CCD camera body that outputs only digital signals. As the result of the front-end electronics test, it works properly with low input noise of =<30 uV at the pixel rate below 100 kHz. The power consumption is sufficiently low of about 150 mW/chip. The input signal range of 720 mV covers the effective energy range of the typical X-ray photon counting CCD (up to 20 keV). The integrated non-linearity is 0.2% that is similar as those of the conventional CCDs in orbit. We also performed a radiation tolerance test against the total ionizing dose (TID) effect and the single event effect. The irradiation test using 60Co and proton beam showed ...

  10. Development of a Multi-Channel Piezoelectric Acoustic Sensor Based on an Artificial Basilar Membrane

    Directory of Open Access Journals (Sweden)

    Youngdo Jung

    2013-12-01

    Full Text Available In this research, we have developed a multi-channel piezoelectric acoustic sensor (McPAS that mimics the function of the natural basilar membrane capable of separating incoming acoustic signals mechanically by their frequency and generating corresponding electrical signals. The McPAS operates without an external energy source and signal processing unit with a vibrating piezoelectric thin film membrane. The shape of the vibrating membrane was chosen to be trapezoidal such that different locations of membrane have different local resonance frequencies. The length of the membrane is 28 mm and the width of the membrane varies from 1 mm to 8 mm. Multiphysics finite element analysis (FEA was carried out to predict and design the mechanical behaviors and piezoelectric response of the McPAS model. The designed McPAS was fabricated with a MEMS fabrication process based on the simulated results. The fabricated device was tested with a mouth simulator to measure its mechanical and piezoelectrical frequency response with a laser Doppler vibrometer and acoustic signal analyzer. The experimental results show that the as fabricated McPAS can successfully separate incoming acoustic signals within the 2.5 kHz–13.5 kHz range and the maximum electrical signal output upon acoustic signal input of 94 dBSPL was 6.33 mVpp. The performance of the fabricated McPAS coincided well with the designed parameters.

  11. Design and Development of a Robotic Crawler for CANDU Fuel Channel Inspection

    Science.gov (United States)

    Shukla, Shivam

    For the design of a new robotic crawler drive unit for CANDU fuel channel inspection, a complete design and screening process was done in order to fulfil the objective of this research. A brief explanation of CANDU reactors is provided along with a discussion of the inspection systems that are currently in use. A study of some existing inspection systems is presented which was used for the development of the new robotic crawler design. A number of concepts were generated which underwent a screening process with the help of two design tools. With the help of these tools, a concept was chosen as the final design and details of it are presented. To demonstrate a proof-of-concept, the physical prototype of the robotic crawler was manufactured and assembled. A speed controller was implemented in the final design of the robotic crawler. A set of test procedures were performed on the final design and the results are discussed. Some improvements that can be done on the final design of the robotic crawler are also discussed in the final section of this thesis.

  12. Joint Force Quarterly. Issue 41, 2nd Quarter, April 2006

    Science.gov (United States)

    2006-04-01

    companies participated, a million more people would be actively looking for threats. Aguas de Amazonas, a subsidiary of Suez Environnement, a...9 Richard B. Myers, “A Word from the Chair- man,” Joint Force Quarterly 37 (2d Quarter 2005), 5. 10 Wald, 26. 11 “Suez— Aguas de Amazonas Water for...humanitarian duties. They have overseen over 130 humani- tarian projects worth in excess of $7.6 million and ranging from a medical center, to potable

  13. [Effect of calcium channel blockers on developing nervous syndrome of high pressure and nitrogen narcosis in mice].

    Science.gov (United States)

    Sledkov, A I

    1997-01-01

    In the experiments conducted on mice which prior to compression in a heliox environment have been injected the blockers of various types of calcium channels (flunarezine, verapramil and nifedipine) as well as bemethyl (actoprotector) and oxymethacye (antioxidant) there escaped detection of noticeable effect of these drugs on developing the high pressure nervous syndrome (HPNS). On exposure to the hyperbaric nitrogen-oxygen environment verapromil (phenylalkulamine blocker of L-type calcium channels) had a protection effect with respect to a convulsive component of the nitrogen narcosis.

  14. Prediction of the Vistula Channel Development Between Wloclawek and Torun: Evaluation with Regard to the New Geological Survey

    Directory of Open Access Journals (Sweden)

    Babiński Zygmunt

    2014-09-01

    Full Text Available The aim of this paper is to present the geological structure of the Vistula river valley floor as the modifying factor of fluvial processes and present the development conditions of the contemporary Vistula river channel, which underwent marked transformation due to bed erosion and lateral erosion below the Włocławek reservoir. The analysis of the geological data and the geological survey conducted at the study reach of the Vistula between Włocławek and Toruń resulted in an image of the geological structure of the channel bed along the longitudinal profile

  15. Somatodendritic ion channel expression in substantia nigra pars compacta dopaminergic neurons across postnatal development.

    Science.gov (United States)

    Dufour, Martial A; Woodhouse, Adele; Goaillard, Jean-Marc

    2014-08-01

    Dopaminergic neurons of the substantia nigra pars compacta (SNc) are involved in the control of movement, sleep, reward, learning, and nervous system disorders and disease. To date, a thorough characterization of the ion channel phenotype of this important neuronal population is lacking. Using immunohistochemistry, we analyzed the somatodendritic expression of voltage-gated ion channel subunits that are involved in pacemaking activity in SNc dopaminergic neurons in 6-, 21-, and 40-day-old rats. Our results demonstrate that the same complement of somatodendritic ion channels is present in SNc dopaminergic neurons from P6 to P40. The major developmental changes were an increase in the dendritic range of the immunolabeling for the HCN, T-type calcium, Kv4.3, delayed rectifier, and SK channels. Our study sheds light on the ion channel subunits that contribute to the somatodendritic delayed rectifier (Kv1.3, Kv2.1, Kv3.2, Kv3.3), A-type (Kv4.3) and calcium-activated SK (SK1, SK2, SK3) potassium currents, IH (mainly HCN2, HCN4), and the L- (Cav1.2, Cav1.3) and T-type (mainly Cav3.1, Cav3.3) calcium currents in SNc dopaminergic neurons. Finally, no robust differences in voltage-gated ion channel immunolabeling were observed across the population of SNc dopaminergic neurons for each age examined, suggesting that differing levels of individual ion channels are unlikely to distinguish between specific subpopulations of SNc dopaminergic neurons. This is significant in light of previous studies suggesting that age- or region-associated variations in the expression profile of voltage-gated ion channels in SNc dopaminergic neurons may underlie their vulnerability to dysfunction and disease.

  16. High Speed, Multi-Channel, Thermal Instrument Development in Support of HyspIRI-TIR

    Science.gov (United States)

    Johnson, William R.; Hook, Simon J.; Foote, Marc; Eng, Bjorn T.; Jau, Bruno

    2011-01-01

    The Jet Propulsion Laboratory is currently developing an end-to-end instrument which will provide a proof of concept prototype vehicle for a high data rate, multi-channel, thermal instrument in support of the Hyperspectral Infrared Imager (HyspIRI)-Thermal Infrared (TIR) space mission. HyspIRI mission was recommended by the National Research Council Decadal Survey (DS). The HyspIRI mission includes a visible shortwave infrared (SWIR) pushboom spectrometer and a multispectral whiskbroom thermal infrared (TIR) imager. The prototype testbed instrument addressed in this effort will only support the TIR. Data from the HyspIRI mission will be used to address key science questions related to the Solid Earth and Carbon Cycle and Ecosystems focus areas of the NASA Science Mission Directorate. Current designs for the HyspIRI-TIR space borne imager utilize eight spectral bands delineated with filters. The system will have 60m ground resolution, 200mK NEDT, 0.5C absolute temperature resolution with a 5-day repeat from LEO orbit. The prototype instrument will use mercury cadmium telluride (MCT) technology at the focal plane array in time delay integration mode. A custom read out integrated circuit (ROIC) will provide the high speed readout hence high data rates needed for the 5 day repeat. The current HyspIRI requirements dictate a ground knowledge measurement of 30m, so the prototype instrument will tackle this problem with a newly developed interferometeric metrology system. This will provide an absolute measurement of the scanning mirror to an order of magnitude better than conventional optical encoders. This will minimize the reliance on ground control points hence minimizing postprocessing (e.g. geo-rectification computations).

  17. Quarterly coal report, July--September 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks. Coke production consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for July through September 1997 and aggregated quarterly historical data for 1991 through the second quarter of 1997. Appendix A displays, from 1991 on, detailed quarterly historical coal imports data. 72 tabs.

  18. IBM, Endicott eleventh quarterly report, April 1, 1997--June 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    IBM Endicott, Assembly Process Design, has completed the tenth quarter of development activity on work concerned with high performance, low cost interconnections for flip attach. The scope of work this quarter included paste deposition process development and chip bonding process development.

  19. L—type calcium channel blockers inhibit the development but not the expression of sensitization to morphine in mice

    Institute of Scientific and Technical Information of China (English)

    ZhanQ; ZhenJW

    2002-01-01

    The relationship between opioid actions and L-type calcium channel blockers has been well documented.However,there is no report relevant to L-type calcium channel blockers and morphinesensitization,which is suggested to be an analog of behaviors that are the characteristics of drug addiction.Here the effects of three L-type calcium channel blockers,nimodipine,nifedipine and verapamil,on morphine-induced locomotor activity,the development and the expression of sensitization to morphine were studied systematically.The results showed that both nimodipine and verapamil attenuated,while nifedipine had only a tendency to decrease morphine-induced locomotor activity.All the three drugs inhibited the development of sensitization to morphine.However,none of them showed any effects on the expression of morphine sensitization.These results indicate that blocking L-tpye calcium channel attenuates the locomotor stimulating effects of morphine and inhibits the development but not the expression of morphine-sensitization.

  20. Role of gap junction channel in the development of beat-to-beat action potential repolarization variability and arrhythmias.

    Science.gov (United States)

    Magyar, Janos; Banyasz, Tamas; Szentandrassy, Norbert; Kistamas, Kornel; Nanasi, Peter P; Satin, Jonathan

    2015-01-01

    The short-term beat-to-beat variability of cardiac action potential duration (SBVR) occurs as a random alteration of the ventricular repolarization duration. SBVR has been suggested to be more predictive of the development of lethal arrhythmias than the action potential prolongation or QT prolongation of ECG alone. The mechanism underlying SBVR is not completely understood but it is known that SBVR depends on stochastic ion channel gating, intracellular calcium handling and intercellular coupling. Coupling of single cardiomyocytes significantly decreases the beat-to-beat changes in action potential duration (APD) due to the electrotonic current flow between neighboring cells. The magnitude of this electrotonic current depends on the intercellular gap junction resistance. Reduced gap junction resistance causes greater electrotonic current flow between cells, and reduces SBVR. Myocardial ischaemia (MI) is known to affect gap junction channel protein expression and function. MI increases gap junction resistance that leads to slow conduction, APD and refractory period dispersion, and an increase in SBVR. Ultimately, development of reentry arrhythmias and fibrillation are associated post-MI. Antiarrhythmic drugs have proarrhythmic side effects requiring alternative approaches. A novel idea is to target gap junction channels. Specifically, the use of gap junction channel enhancers and inhibitors may help to reveal the precise role of gap junctions in the development of arrhythmias. Since cell-to-cell coupling is represented in SBVR, this parameter can be used to monitor the degree of coupling of myocardium.

  1. Guidelines for Surveying Bankfull Channel Geometry and Developing Regional Hydraulic-Geometry Relations for Streams of New York State

    Science.gov (United States)

    Powell, Rocky O.; Miller, Sarah J.; Westergard, Britt E.; Mulvihill, Christiane I.; Baldigo, Barry P.; Gallagher, Anne S.; Starr, Richard R.

    2004-01-01

    Many disturbed streams within New York State are being restored in an effort to provide bank and bed stability and thereby decrease sedimentation and erosion. Efforts to identify and provide accurate indicators for stable-channel characteristics for ungaged streams have been hampered by the lack of regional equations or relations that relate drainage area to bankfull discharge and to channel depth, width, and cross-sectional area (bankfull hydraulic-geometry relations). Regional equations are needed to confirm bankfull hydraulic-geometry, assess stream stability, evaluate restoration needs, and verify restoration design for ungaged streams that lack stage-to-discharge ratings or historic peak-flow records. This report presents guidelines for surveying bankfull channel geometry at USGS stream gages and developing regional hydraulic-geometry relations (equations) for wadeable streams in New York. It summarizes methods to (1) compile and assess existing hydrologic, geometric, photographic, and topographic data, (2) conduct stream-reconnaissance inspections, (3) identify channel-bankfull characteristics, (4) conduct longitudinal and cross-section surveys, (5) measure stream discharge, (6) develop and refine bankfull hydraulic-geometry equations, and (7) analyze and assure data completeness and quality. The techniques primarily address wadeable streams with either active or discontinued surface-water and crest-stage gages. The relations can be applied to ungaged or actively gaged streams that are wadeable, and may be extended to non-wadeable streams (with some limitations) if they have drainage areas comparable to those used to develop the relations.

  2. Electronic Service Statistics - Quarterly Report

    Data.gov (United States)

    Social Security Administration — This is a quarterly report that compares electronic data vs non-electronic data for electronic services. Report contains six main sections namely, electronic access,...

  3. Quarterly environmental data summary for first quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    In support of the Weldon Spring Site Remedial Action Project Federal Facilities Agreement, a copy of the Quarterly Environmental Data Summary (QEDS) for the first quarter of 1998 is enclosed. The data presented in this letter and attachment constitute the QEDS. The data were received from the contract laboratories, verified by the Weldon Spring Site verification group and, except for air monitoring data and site KPA generated data (uranium analyses), merged into the data base during the first quarter of 1998. Air monitoring data presented are the most recent complete sets of quarterly data. Air data are not stored in the data base, and KPA data are not merged into the regular data base. Significant data, defined as data values that have exceeded defined {open_quotes}above normal{close_quotes} Level 2 values, are discussed in this letter for Environmental Monitoring Plan (EMP) generated data only. Above normal Level 2 values are based, in ES&H procedures, on historical high values, DOE Derived Concentration Guides (DCGs), NPDES limits and other guidelines. The procedures also establish actions to be taken in the event that {open_quotes}above normal{close_quotes} data occur. All data received and verified during the first quarter were within a permissible range of variability except for those detailed below. Above normal occurrences are cited for groundwater, air, and NPDES data. There were none for springs or surface water. The following discussion offers a brief summary of the data merged during the first quarter that exceeded the above normal criteria and updates on past reported above normal data. The attached tables present the most recent data for air and the data merged into the data base during the first quarter 1998 for groundwater, NPDES, surface water, and springs. Graphs showing concentrations of selected contaminants of concern at some of the critical locations have also been included in this QEDS. The graphs are discussed in the separate sections.

  4. [Development of multi-channels cardiac electrophysiological polygraph with LabVIEW as software platform and its clinical application].

    Science.gov (United States)

    Fan, Shounian; Jiang, Yi; Jiang, Chenxi; Yang, Tianhe; Zhang, Chengyun; Liu, Junshi; Wu, Qiang; Zheng, Yaxi; Liu, Xiaoqiao

    2004-10-01

    Polygraph has become a necessary instrument in interventional cardiology and fundamental research of medicine up to the present. In this study, a LabView development system (DS) (developed by NI in U.S.) used as software platform, a DAQ data acquisition module and universal computer used as hardware platform, were creatively coupled with our self-made low noise multi-channels preamplifier to develop Multi-channels electrocardiograph. The device possessed the functions such as real time display of physiological process, digit highpass and lowpass, 50Hz filtered and gain adjustment, instant storing, random playback and printing, and process control stimulation. Besides, it was small-sized, economically practical and easy to operate. It could advance the spread of cardiac intervention treatment in hospitals.

  5. Short-term energy outlook: Quarterly projections, fourth quarter 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-14

    The Energy Information Administration (EIA) prepares quarterly short-term energy supply, demand, and price projections for printed publication in January, April, July, and October in the Short-Term Energy Outlook. The details of these projections, as well as monthly updates on or about the 6th of each interim month, are available on the internet at: www.eia.doe.gov/emeu/steo/pub/contents.html. The forecast period for this issue of the Outlook extends from the fourth quarter of 1997 through the fourth quarter of 1998. Values for the fourth quarter of 1997, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in EIA`s Weekly Petroleum Status Report) or are calculated from model simulations that use the latest exogenous information available (for example, electricity sales and generation are simulated by using actual weather data). The historical energy data, compiled in the fourth quarter 1997 version of the Short-Term Integrated Forecasting System (STIFS) database, are mostly EIA data regularly published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications. Minor discrepancies between the data in these publications and the historical data in this Outlook are due to independent rounding. The STIFS model is driven principally by three sets of assumptions or inputs: estimates of key macroeconomic variables, world oil price assumptions, and assumptions about the severity of weather. 19 tabs.

  6. How to allocate public funding to nongovernmental development organizations: A critical assessment of the Dutch co-financing system

    NARCIS (Netherlands)

    Ruben, R.; Schulpen, L.W.M.

    2009-01-01

    The Dutch co-financing system for nongovernmental development organizations (NGDOs) is unique in Europe. Almost a quarter of public development aid is channeled through a selective group of NGDOs that have to satisfy a broad range of institutional and operational criteria. The procedures for definin

  7. Development of novel copper-based sorbents for hot-gas cleanup. [Quarterly] technical report, March 1, 1993--May 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Hill, A.H.; Abbasian, J. [Institute of Gas Technology, Chicago, IL (United States); Flytzani-Stephanopoulos, M.; Li, Li [Massachusetts Inst. of Tech., Cambridge, MA (United States)

    1993-09-01

    The objective of this investigation is to evaluate two novel copper-based sorbents (i.e. copper-chromium and copper-cerium) for their effectiveness in removing hydrogen sulfide from fuel gas in the temperature range of 650{degrees} to 850{degrees}C. In this program, structural and kinetic studies are conducted on various compositions of the two selected copper-based sorbents to determine the optimum sorbent composition. The effect of operating conditions on the performance of the sorbents alone with the stability and regenerability of the selected sorbents in successive sulfidation/regeneration operation are determined. Parametric multicycle desulfurization tests were conducted this quarter in a bench-scale (5-cm-diameter) quartz reactor at one atmosphere using the CuCr{sub 2}O{sub 4} and CuO/CeO{sub 2} sorbents. The parameters studied included temperature, space velocity, and feed gas composition. Both sorbents were able to reduce the H{sub 2}S concentration of the reactor feed gas to <10 ppM under all conditions tested. The apparent reactivity of the CuO/CeO{sub 2} sorbent was lower after the first cycle which may be attributed to incomplete regeneration caused by sulfate formation.

  8. Developing a low cortisol responsive line of channel catfish, Ictalurus punctatus

    Science.gov (United States)

    Nagaraj G. Chatakondi and Brian C. Peterson USDA ARS Warmwater Aquaculture Research Unit, 141 Experiment Station Road, Stoneville, MS 38776. nagaraj.chatakondi@ars.usda.gov Channel catfish, Ictalurus punctatus is the most important farm-raised aquacultured species in the USA. Stressors in aquacultu...

  9. Development of heart failure is independent of K+ channel-interacting protein 2 expression

    DEFF Research Database (Denmark)

    Speerschneider, Tobias; Grubb, Søren; Metoska, Artina;

    2013-01-01

    Abstract  Abnormal ventricular repolarization in ion channelopathies and heart disease is a major cause of ventricular arrhythmias and sudden cardiac death. K(+) channel-interacting protein 2 (KChIP2) expression is significantly reduced in human heart failure (HF), contributing to a loss...

  10. Increased Throughput in Ion Channel Drug Development and Exploration by Automation of Electrophysiology

    DEFF Research Database (Denmark)

    Willumsen, N. J.

    2006-01-01

    Ion channels constitute macromolecular communication gates that are present in the membranes of all living cells. They are crucial for practically any physiological process, either as chemical or electrical signal transducers or as transmembrane routes for the bulk transport of salts. Not surpris...

  11. Development and characterization of the superconducting integrated receiver channel of the TELIS atmospheric sounder

    NARCIS (Netherlands)

    De Lange, Gert; Birk, Manfred; Boersma, Dick; Dercksen, Johannes; Dmitriev, Pavel; Ermakov, Andrey B.; Filippenko, Lyudmila V.; Golstein, Hans; Hoogeveen, Ruud W. M.; de Jong, Leo; Khudchenko, Andrey V.; Kinev, Nickolay V.; Kiselev, Oleg S.; van Kuik, Bart; de Lange, Arno; van Rantwijk, Joris; Selig, Avri M.; Sobolev, Alexander S.; Torgashin, Mikhail Yu; de Vries, Ed; Wagner, Georg; Yagoubov, Pavel A.; Koshelets, Valery P.

    2010-01-01

    The balloon-borne instrument TELIS (TErahertz and submillimetre LImb Sounder) is a three-channel superconducting heterodyne spectrometer for atmospheric research use. It detects spectral emission lines of stratospheric trace gases that have their rotational transitions at THz frequencies. One of the

  12. Evaluation of mental workload and familiarity in human computer interaction with integrated development environments using single-channel EEG

    OpenAIRE

    2015-01-01

    With modern developments in sensing technology it has become possible to detect and classify brain activity into distinct states such as attention and relaxation using commercially avail- able EEG devices. These devices provide a low-cost and minimally intrusive method to observe a subject’s cognitive load whilst interacting with a computer system, thus providing a basis for deter- mining the overall effectiveness of the design of a computer interface. In this paper, a single-channel dry sens...

  13. Short-term energy outlook: Quarterly projections, second quarter 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    The Energy Information Administration (EIA) prepares quarterly short-term energy supply, demand, and price projections for publication in January, April, July, and October in the Outlook. The forecast period for this issue of the Outlook extends from the second quarter of 1997 through the fourth quarter of 1998. Values for the first quarter of 1997, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in EIA`s Weekly Petroleum Status Report) or are calculated from model simulations that use the latest exogenous information available (for example, electricity sales and generation are simulated by using actual weather data). The historical energy data, compiled in the second quarter 1997 version of the Short-Term Integrated Forecasting System (STIFS) database, are mostly EIA data regularly published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications. Minor discrepancies between the data in these publications and the historical data in this Outlook are due to independent rounding. The STIFS database is archived quarterly and is available from the National Technical Information Service. The STIFS model is driven principally by three sets of assumptions or inputs: estimates of key macroeconomic variables, world oil price assumptions, and assumptions about the severity of weather. Macroeconomic estimates are produced by DRI/McGraw-Hill but are adjusted by EIA to reflect EIA assumptions about the world price of crude oil, energy product prices, and other assumptions which may affect the macroeconomic outlook. By varying the assumptions, alternative cases are produced by using the Short-Term Integrated Forecasting System (STIFS). 34 figs., 19 tabs.

  14. Brands & Channels

    Institute of Scientific and Technical Information of China (English)

    Alice Yang

    2009-01-01

    @@ "Brands" and "Channels" are the two most important things in Ku-Hai Chen's eyes when doing business with Main-land China. Ku-Hai Chen, Executive Director of the International Trade Institute of Taiwan External Trade Development Council (TAITRA), flies frequently between Chinese Taipei and Mainland China, and was in Beijing earlier this month for his seminar.

  15. The impacts of ski slope development on stream channel morphology in the White River National Forest, Colorado, USA

    Science.gov (United States)

    David, Gabrielle C. L.; Bledsoe, Brian P.; Merritt, David M.; Wohl, Ellen

    2009-02-01

    The combined influence of tree-clearing, road construction, snowmaking, and machine-grading can cause increased flow and sediment loads along streams in or adjacent to commercial ski resorts. These changes to stream channels can increase bank failures, bed material size, pool scour, and, in extreme cases, channel incision. We used field data from the White River National Forest in Colorado, which includes several major ski resorts, to test the hypothesis that ski slope development causes a significant difference in bank stability, undercut banks, fine sediment, wood load, pool residual depth, and particle size ( D84) between the ski area project streams and reference streams. We further hypothesize that the changes in a stream are mitigated by the density and type of vegetation growing along the banks. A significant difference is defined as a project stream that is outside the range of variability of the reference streams. To test these hypotheses, we surveyed channel conditions, channel dimensions, and vegetation along 47 stream reaches (200-300 m in length). Twenty-four of these streams are within ski areas (project streams), either adjacent to or downstream from ski slopes. Twenty-three reference streams with very little to no development in their basins are used to define reference conditions of bank stability, bank undercutting, bank height, wood load, pool residual depth, sediment size, and vegetation structure. A combination of statistical techniques, including Principal Components Analysis and Classification and Regression Tree Analysis, was used to assess the controls on stream channel morphology and to analyze the differences between project and reference streams. Project streams that are significantly different than reference streams have a combination of a higher percentage of fine sediment, smaller pool residual depth, and higher percentage of unstable banks. The impacted project streams have bed material derived from granitic rocks and a lower density

  16. Environmental Hazards Assessment Program. Quarterly report, January 1994--March 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-04

    The objectives of the EHAP program are to: Develop a holistic, national basis for risk assessment, risk management and risk communication; Develop a pool of talented scientists and experts in cleanup activities, especially in human health aspects, and; Identify needs and develop programs addressing the critical shortage of well-educated, highly-skilled technical and scientific personnel to address the health oriented aspects of environmental restoration and waste management. This report describes activities and reports on progress for the third quarter of year two (January-March, 1994) of the grant. To better accomplish objectives, grant efforts are organized into three major elements: The Crossroads of Humanity Series; Research, Science and Education Programs; and Program Management. The Crossroads of Humanity Series charted a new course, incorporating lessons learned during previous quarters into a series of programs designed to address environmental issues in a real world setting. Reports are included on the various research programs with milestones and deliverables from the third quarter.

  17. Continuous Czochralski growth: silicon sheet growth development of the large area silicon sheets task of the Low Cost Silicon Solar Array Project. Ninth quarterly progress report, October 1-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Lane, R.L.; Roberts, E.

    1979-01-01

    During this reporting period, four more 100 kg continuous runs were completed to satisfy the six required by the project extension. One of the four (2*) was performed using a new standard CG2000 RC grower, using accessory equipment and process techniques developed under this project. The sixth and final 100 kg continuous run was performed with purified carbon parts and resulted in the best results to date. Run No. 62 resulted in 103.0 kg being pulled from 104.5 kg total charge weight (98.6% pulled yield). Of this 103 kg grown, 89.3 kg were monocrystalline. Moreover, 72.2 kg was OD material. Another encouraging result was that 85% of the eighth crystal was monocrystalline and 67% of the ninth and last crystal was monocrystaline after ninety seven hours of continuous growth. Impurity analysis data indicate that impurity build-up in grown crystals during 100 kg continuous runs is insignificant. However, the results indicate that impurities tend to accumulate in the crucible. Moreover, impurity analysis performed on new crucibles indicates that these new crucibles may not be as pure as the manufacturer's literature states. Solar cell efficiency data from two 100 kg continuous runs were received this quarter with very encouraging results. The average efficiencies of all cells tested was 16.35% AM1, which is considerably higher than our 14% AM1 goal. Moreover, the efficiencies remained at or near the same levels throughout the entire 100 kg continuous run. We expect to receive solar cell efficiency results from three more of the 100 kg continuous runs in the next quarter.

  18. CONSIDERATIONS FOR THE DEVELOPMENT OF A DEVICE FOR THE DECOMMISSIONING OF THE HORIZONTAL FUEL CHANNELS IN THE CANDU 6 NUCLEAR REACTOR. PART 7 - FUNCTIONING OF THE DECOMMISSIONING DEVICE

    Directory of Open Access Journals (Sweden)

    Gabi ROSCA FARTAT

    2015-05-01

    Full Text Available The scope of this paper is to achieve the device functioning steps for the commissioning of the horizontal fuel channels of calandria vessel. The dismantling of the fuel channel is performed by one device which shall provide radiation protection during the stages of decommissioning, ensuring radiation protection of the workers. For the decommissioning operation design shall be taken to ensure all aspects of security, environmental protection during decommissioning operation steps and creating and implementing work procedures resulting from developed decommissioning plan. The fuel channel decommissioning device is designed for dismantling and extraction of the fuel channel and its components. The decommissioning operation consists of following major steps: platform with device positioning to the fuel channel to be dismantled; coupling and locking the device at the fuel channel; unblock, extract and store the channel closure plug; unblock, extract and store the channel shield plug; block and cut the middle and the end of the pressure tube; block, extract and store the end fitting; block, extract and store the half of pressure tube; mounting of the extended closing plug. The operations steps are performed by the Cutting and Extraction Device and by the extraction actuator from the device handling elements assembly. After each step of dismantling is necessary the confirmation its finalization in order to perform the next operation step. The dismantling operation steps of the fuel channel components are repeated for all the 380 channels of the reactor, from the front of calandria side (plane R as well as the rear side (plane R'.

  19. Development of supported biomimetic membranes for insertion of aquaporin protein water channels for novel water filtration applications

    DEFF Research Database (Denmark)

    Hansen, Jesper Søndergaard

    to develop novel water separation technologies. To accomplish this, it is necessary to construct an efficient platform to handle biomimetic membranes. Moreover, general methods are required to reliable and controllable reconstitute membrane proteins into artificially made model membranes......Aquaporins represent a class of membrane protein channels found in all living organisms that selectively transport water molecules across biological membranes. The work presented in this thesis was motivated by the conceptual idea of incorporating aquaporin water channels into biomimetic membranes......). This constitutes a new methodology to correctly and functionally reconstitute membrane proteins in controllable amounts into giant vesicles. The method for formation of giant protein vesicles subsequently led to the first functional prototype of an aquaporin-membrane water filtration device....

  20. Yucca Mountain Site Characterization Project technical data catalog quarterly supplement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-31

    The Department of Energy (DOE)/Nuclear Regulatory Commission (NRC) Site-Specific Procedural Agreement for Geologic Repository Site Investigation and Characterization Program requires the DOE to develop and maintain a catalog of data which will be updated and provided to the NRC at least quarterly. This catalog is to include a description of the data; the time (date), place, and method of acquisition; and where the data may be examined. The Yucca Mountain Site Characterization Project (YMP) Technical Data Catalog is published and distributed in accordance with t requirements of the Site-Specific Agreement. The YMP Technical Data Catalog is a report based on reference information contained in the YMP Automated Technical Data Tracking System (ATDT). The reference information is provided by Participants for data acquired or developed in support of the YMP. The Technical Data Catalog is updated quarterly and distributed in the month following the end of each quarter. A complete revision to the catalog is published at the end of each fiscal year. Supplements to the end-of-year edition are published each quarter. These supplements provide information related to new data items not included in previous quarterly updates and data items affected by changes to@ previously published reference information. The Technical Data Catalog, dated September 30, 1994, should be retained as the baseline document for the supplements until the end-of-year revision is published and distributed in October 1995.

  1. Yucca Mountain Site Characterization Project: Technical Data Catalog quarterly supplement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-31

    The March 21, 1993, Department of Energy (DOE)/Nuclear Regulatory Commission (NRC) Site-Specific Procedural Agreement for Geologic Repository Site Investigation and Characterization Program requires the DOE to develop and maintain a catalog of data which will be updated and provided to the NRC at least quarterly. This catalog is to include a description of the data; the time (date), place, and method of acquisition; and where it may be examined. The Yucca Mountain Site Characterization Project (YMP) Technical Data Catalog is published and distributed in accordance with the requirements of the Site-Specific Agreement. The YMP Technical Data Catalog is a report based on reference information contained in the YMP Automated Technical Data Tracking System (ATDT). The reference information is provided by Participants for data acquired or developed in support of the YMP. The Technical Data Catalog is updated quarterly and published in the month following the end of each quarter. A complete revision to the Catalog is published at the end of each fiscal year. Supplements to the end-of-year edition are published each quarter. These supplements provide information related to new data items not included in previous quarterly updates and data items affected by changes to previously published reference information. The Technical Data Catalog, dated September 30, 1993, should be retained as the baseline document for the supplements until the end-of-year revision is published and distributed in October 1994.

  2. Quarterly coal report, July--September 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for July through September 1998 and aggregated quarterly historical data for 1992 through the second quarter of 1998. 58 tabs.

  3. MHD Integrated Topping Cycle Project. Sixteenth quarterly technical progress report, May 1991--July 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990`s, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

  4. Joint Force Quarterly. Issue 66, 3rd Quarter 2012

    Science.gov (United States)

    2012-07-01

    Walter Russell Mead, “The Serpent and the Dove,” in Special Providence: American Foreign ndupress .ndu.edu issue 66, 3 rd quarter 2012 / JFQ 21...the desired direction. An example is our finding that social isolation and loneliness are two individual factors that were most divergent between

  5. Short-term energy outlook, quarterly projections, first quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    The forecast period for this issue of the Outlook extends from the first quarter of 1998 through the fourth quarter of 1999. Values for the fourth quarter of 1997, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in EIA`s Weekly Petroleum Status Report) or are calculated from model simulations that use the latest exogenous information available (for example, electricity sales and generation are simulated by using actual weather data). The historical energy data, compiled in the first quarter 1998 version of the Short-Term Integrated Forecasting System (STIFS) database, are mostly EIA data regularly published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications. Minor discrepancies between the data in these publications and the historical data in this Outlook are due to independent rounding. The STIFS model is driven principally by three sets of assumptions or inputs: estimates of key macroeconomic variables, world oil price assumptions, and assumptions about the severity of weather. Macroeconomic estimates are adjusted by EIA to reflect EIA assumptions which may affect the macroeconomic outlook. By varying the assumptions, alternative cases are produced by using the STIFS model. 24 figs., 19 tabs.

  6. Short-Term Energy Outlook: Quarterly projections. Fourth quarter 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-05

    The Energy Information Administration (EIA) prepares quarterly, short-term energy supply, demand, and price projections for publication in February, May, August, and November in the Short-Term Energy Outlook (Outlook). An annual supplement analyzes the performance of previous forecasts, compares recent cases with those of other forecasting services, and discusses current topics related to the short-term energy markets. (See Short-Term Energy Outlook Annual Supplement, DOE/EIA-0202.) The forecast period for this issue of the Outlook extends from the fourth quarter of 1993 through the fourth quarter of 1994. Values for the third quarter of 1993, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in the Weekly Petroleum Status Report) or are calculated from model simulations using the latest exogenous information available (for example, electricity sales and generation are simulated using actual weather data). The historical energy data are EIA data published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications.

  7. Water Reactor Safety Research Division. Quarterly progress report, April 1-June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Abuaf, N.; Levine, M.M.; Saha, P.; van Rooyen, D.

    1980-08-01

    The Water Reactor Safety Research Programs quarterly report describes current activities and technical progress in the programs at Brookhaven National Laboratory sponsored by the USNRC Division of Reactor Safety Research. The projects reported each quarter are the following: LWR Thermal Hydraulic Development, Advanced Code Evlauation, TRAC Code Assessment, and Stress Corrosion Cracking of PWR Steam Generator Tubing.

  8. Advanced Reactor Safety Research Division. Quarterly progress report, January 1-March 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Agrawal, A.K.; Cerbone, R.J.; Sastre, C.

    1980-06-01

    The Advanced Reactor Safety Research Programs quarterly progress report describes current activities and technical progress in the programs at Brookhaven National Laboratory sponsored by the USNRC Division of Reactor Safety Research. The projects reported each quarter are the following: HTGR Safety Evaluation, SSC Code Development, LMFBR Safety Experiments, and Fast Reactor Safety Code Validation.

  9. Advanced Reactor Safety Research Division. Quarterly progress report, April 1-June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Romano, A.J.

    1980-01-01

    The Advanced Reactor Safety Research Programs Quarterly Progress Report describes current activities and technical progress in the programs at Brookhaven National Laboratory sponsored by the USNRC Division of Reactor Safety Research. The projects reported each quarter are the following: HTGR safety evaluation, SSC Code Development, LMFBR Safety Experiments, and Fast Reactor Safety Code Validation.

  10. 10 CFR 34.29 - Quarterly inventory.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Quarterly inventory. 34.29 Section 34.29 Energy NUCLEAR... RADIOGRAPHIC OPERATIONS Equipment § 34.29 Quarterly inventory. (a) Each licensee shall conduct a quarterly physical inventory to account for all sealed sources and for devices containing depleted uranium...

  11. Developing a 2D vertical flow and sediment transport model for open channels using the Youngs-VOF method

    Science.gov (United States)

    Zhao, Dongmiao; Tang, Jun; Wu, Xiuguang; Lin, Changning; Liu, Lijun; Chen, Jian

    2016-05-01

    A 2D vertical (2DV) numerical model, without σ-coordinate transformation in the vertical direction, is developed for the simulation of fl ow and sediment transport in open channels. In the model, time-averaged Reynolds equations are closed by the k-ɛ nonlinear turbulence model. The modifi ed Youngs-VOF method is introduced to capture free surface dynamics, and the free surface slope is simulated using the ELVIRA method. Based on the power-law scheme, the k-ɛ model and the suspended-load transport model are solved numerically with an implicit scheme applied in the vertical plane and an explicit scheme applied in the horizontal plane. Bedload transport is modeled using the Euler-WENO scheme, and the grid-closing skill is adopted to deal with the moving channel bed boundary. Verifi cation of the model using laboratory data shows that the model is able to adequately simulate fl ow and sediment transport in open channels, and is a good starting point for the study of sediment transport dynamics in strong nonlinear fl ow scenarios.

  12. Apprentices & Trainees: September Quarter, 2012

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2013

    2013-01-01

    This publication presents estimates of apprentice and trainee activity in Australia for the September quarter 2012. The figures in this publication are derived from the National Apprentice and Trainee Collection no.74 (December 2012 estimates). The most recent figures in this publication are estimated (those for training activity from the March…

  13. Development of an OSL chronology for Late Pleistocene channel belts in the lower Mississippi valley, USA

    Science.gov (United States)

    Rittenour, Tammy M.; Goble, Ronald J.; Blum, Michael D.

    2005-12-01

    The broad alluvial valley of the lower Mississippi River contains large channel belts for which age control has been limited by the lack of organic material for radiocarbon dating and deposit ages greater than the limit of radiocarbon. In order to produce a detailed chronology of fluvial evolution, samples for optical dating were collected from Late Pleistocene channel-belt deposits. Quartz sand was analyzed using the coarse-grained, single-aliquot regenerative-dose (SAR) technique. Samples showed little evidence of partial bleaching, and optical ages are for the most part consistent with the available radiocarbon and relative age constraints. Optical ages range from 85 to 11 ka and, along with geomorphic and stratigraphic relationships, indicate that the Mississippi River was meandering during the end of the last interglacial (85-83 ka) and switched to a braided regime by 64-50 ka during initial marine oxygen isotope stage (OIS) 4/3 glaciation of the upper Mississippi drainage basin. The Mississippi River switched back to a meandering regime after formation of the youngest braid belt at 11 ka. The 69 optical ages presented here provide the first detailed chronology of lower Mississippi valley braid-belt and Pleistocene meander-belt formation, and provide an example of the utility of optical dating in fluvial settings where material for radiocarbon dating is scarce.

  14. Quarterly coal report, October--December 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for October through December 1998 and aggregated quarterly historical data for 1992 through the third quarter of 1998. Appendix A displays, from 1992 on, detailed quarterly historical coal imports data. 58 tabs.

  15. Quarterly coal report, January--March 1998

    Energy Technology Data Exchange (ETDEWEB)

    Young, P.

    1998-08-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for January through March 1998 and aggregated quarterly historical data for 1992 through the fourth quarter of 1997. Appendix A displays, from 1992 on, detailed quarterly historical coal imports data. To provide a complete picture of coal supply and demand in the United States, historical information has been integrated in this report. 58 tabs.

  16. Quarterly coal report, April--June, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for April through June 1998 and aggregated quarterly historical data for 1992 through the first quarter of 1998. Appendix A displays, from 1992 on, detailed quarterly historical coal imports data. 58 tabs.

  17. Quarterly coal report, October--December 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for October through December 1996 and aggregated quarterly historical data for 1990 through the third quarter of 1996. Appendix A displays, from 1988 on, detailed quarterly historical coal imports data. To provide a complete picture of coal supply and demand in the US, historical information has been integrated in this report. 8 figs., 72 tabs.

  18. Development and Testing of an In-Vitro Assay for Screening of Potential Therapeutic Agents Active against Na Channel Neurotoxins

    Science.gov (United States)

    1988-02-08

    effect to inhibit the binding of [3H]BTX-B is not mediated through an interaction at sodium ...compounds acting at the sodium channel 29 Figure 2. Sodium channel /ot-scorpion toxin sequence homology 30 Figure 3. Effects of nesacaine, benzimidazole...the channel , and alters the single channel conductance. In considering this broad spectrum of effects , one is led to invoke a model for sodium channel

  19. MANAGEMENT OF DISTRIBUTION CHANNELS IN MARKETING AND LOGISTICS CENTERS IN THE DEVELOPMENT OF A CLUSTERING APPROACH

    Directory of Open Access Journals (Sweden)

    Tolga DURSUN

    2016-01-01

    Full Text Available Increasing world trade along with globalization increases logistic activities and thus the importance of the logistics sector.After the introduction of the concept of logistics village it has been observed that they disseminated rapidly mainly because of many advantages they provided Today, in Europe, more than 80 logistics vilalges are in operation at national or international scale; many more are being planned or being constructed.This study provides information about the properties of logistics villages,distribution channels, about existing logistics villages in Europe, and planned logistics villages in Turkey.The study also investigates the properties of locations and qualities of such villages.Logistic clustering criteria are determined for higher efficiencies.

  20. Development and characterization of the superconducting integrated receiver channel of the TELIS atmospheric sounder

    Energy Technology Data Exchange (ETDEWEB)

    De Lange, Gert; Boersma, Dick; Dercksen, Johannes; Ermakov, Andrey B; Golstein, Hans; Hoogeveen, Ruud W M; De Jong, Leo; Khudchenko, Andrey V; Kinev, Nickolay V; Kiselev, Oleg S; Van Kuik, Bart; De Lange, Arno; Van Rantwijk, Joris; Selig, Avri M; De Vries, Ed [SRON Netherlands Institute for Space Research, PO Box 800, 9700 AV Groningen (Netherlands); Birk, Manfred [DLR German Aerospace Centre, Remote Sensing Technology Institute, D-82234 Wessling (Germany); Dmitriev, Pavel; Filippenko, Lyudmila V; Sobolev, Alexander S; Torgashin, Mikhail Yu, E-mail: G.de.Lange@sron.n, E-mail: valery@hitech.cplire.r [Kotel' nikov Institute of Radio Engineering and Electronics, Russian Academy of Science, 11/7 Mokhovaya Street, 125009, Moscow (Russian Federation)

    2010-04-15

    The balloon-borne instrument TELIS (TErahertz and submillimetre LImb Sounder) is a three-channel superconducting heterodyne spectrometer for atmospheric research use. It detects spectral emission lines of stratospheric trace gases that have their rotational transitions at THz frequencies. One of the channels is based on the superconducting integrated receiver (SIR) technology. We demonstrate for the first time the capabilities of the SIR technology for heterodyne spectroscopy in general, and atmospheric limb sounding in particular. We also show that the application of SIR technology is not limited to laboratory environments, but that it is well suited for remote operation under harsh environmental conditions. Within a SIR the main components needed for a superconducting heterodyne receiver such as a superconductor-insulator-superconductor (SIS) mixer with a quasi-optical antenna, a flux-flow oscillator (FFO) as the local oscillator, and a harmonic mixer to phase lock the FFO are integrated on a single chip. Light weight and low power consumption combined with broadband operation and nearly quantum limited sensitivity make the SIR a perfect candidate for use in future airborne and space-borne missions. The noise temperature of the SIR was measured to be as low as 120 K, with an intermediate frequency band of 4-8 GHz in double-sideband operation. The spectral resolution is well below 1 MHz, confirmed by our measurements. Remote control of the SIR under flight conditions has been demonstrated in a successful balloon flight in Kiruna, Sweden. The sensor and instrument design are presented, as well as the preliminary science results from the first flight.

  1. Endothelin induces two types of contractions of rat uterus: phasic contractions by way of voltage-dependent calcium channels and developing contractions through a second type of calcium channels

    Energy Technology Data Exchange (ETDEWEB)

    Kozuka, M.; Ito, T.; Hirose, S.; Takahashi, K.; Hagiwara, H.

    1989-02-28

    Effects of endothelin on nonvascular smooth muscle have been examined using rat uterine horns and two modes of endothelin action have been revealed. Endothelin (0.3 nM) caused rhythmic contractions of isolated uterus in the presence of extracellular calcium. The rhythmic contractions were completely inhibited by calcium channel antagonists. These characteristics of endothelin-induced contractions were very similar to those induced by oxytocin. Binding assays using /sup 125/I-endothelin showed that endothelin and the calcium channel blockers did not compete for the binding sites. However, endothelin was unique in that it caused, in addition to rhythmic contractions, a slowly developing monophasic contraction that was insensitive to calcium channel blockers. This developing contraction became dominant at higher concentrations of endothelin and was also calcium dependent.

  2. Joint Force Quarterly. Issue 73, 2nd Quarter 2014

    Science.gov (United States)

    2014-04-01

    For example, if missile defense is a priority then perhaps the Ballistic Missile Defense System (BMDS) is key cyber terrain. Step two in this...better forensics , and trustworthy computing platforms—is crucial. While one of the principal advantages to cyberspace is the ability to share...Silent Watch JFQ 73, 2nd Quarter 2014 capabilities to defeat a wide range of stressing ballistic missiles in either the exoatmosphere (outer space) or

  3. CONSIDERATIONS FOR THE DEVELOPMENT OF A DEVICE FOR THE DECOMMISSIONING OF THE HORIZONTAL FUEL CHANNELS IN THE CANDU 6 NUCLEAR REACTOR. PART 6 - PRESENTATION OF THE DECOMMISSIONING DEVICE

    Directory of Open Access Journals (Sweden)

    Gabi ROSCA FARTAT

    2015-05-01

    dismantling and extraction of the channel closure plug and shield plug, extraction of the end fitting, cutting and extraction of the pressure tube. The fuel channel decommissioning device consists of following major components: coupling and locking fuel channel module, assembly valve for access to the fuel channel, storage tubes assembly for extracted components, handling elements assembly, cutting and extraction device and housing device. The design of the device and platform support is achieved according to the particular features of the fuel channel components to be dismantled in the program of nuclear reactor decommissioning according to all the safety aspects and environmental protection during the activities, resulting from the decommissioning plan developed.

  4. Parallel Damping Injection for the Quarter Car Suspension System.

    NARCIS (Netherlands)

    Scherpen, Jacquelien M.A.; Jeltsema, Dimitri; Maulny, François

    2006-01-01

    In this paper we study an application of Passivity-Based Control (PBC) to a quarter car suspension system. We use Passivity-Based Control in the Brayton-Moser framework (BM-PBC) that has recently been developed for control of switching and non-switching electrical circuits. Via the usual mass-induct

  5. Coal liquefaction. Quarterly report, July-September 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    The status of coal liquefaction pilot plants supported by US DOE is reviewed under the following headings: company involved, location, contract, funding, process name, process description, flowsheet, history and progress during the July-September 1979 quarter. Supporting projects such as test facilities, refining and upgrading coal liquids, catalyst development, and gasification of residues from coal gasification plants are discussed similarly. (LTN)

  6. Development of a experimental facility for the flow regime identification of two-phase flow in the inclined mini channel

    Energy Technology Data Exchange (ETDEWEB)

    Kwark, Nam Yi; Lee, Jae Young [Handong Global University, Pohang (Korea, Republic of); Lee, Sang Gyu; Kim, Man Woong [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of)

    2006-07-01

    Recently, miniaturization is one of popular issues in the engineering design. Based on the successful advance in the semi-conductor industry, the new fabrication method cultivates new devices of tiny size. Generally, these miniaturized gadgets were more efficient than the normal devices. The major physical parameters governing the phenomena are changed as the scale decreases and unexpected effects open a room of improvement. For instant, the phase change phenomena in a micro or mini channel have been known to be enhanced. For developing a compact and efficient heat exchanger, the study on the two phase flow in a miniaturized flow channel is imperative. Furthermore, the produced hydrogen will be fed into the fuel cell which needs to drain out the water generated in the reaction at the diffusion layer of electrode membrane, effective removal of vapor plug is necessary. Also, in the safety study of CANDU reactor several parts of feeder pipes have the incline angles which will affect the accuracy of the safety analysis when the flow regime map of code is ill addressed. In line with the development of the RELAP-CANDU, the present work also is aimed to be studied.

  7. Development of a lung slice preparation for recording ion channel activity in alveolar epithelial type I cells

    Directory of Open Access Journals (Sweden)

    Crandall Edward D

    2005-04-01

    Full Text Available Abstract Background Lung fluid balance in the healthy lung is dependent upon finely regulated vectorial transport of ions across the alveolar epithelium. Classically, the cellular locus of the major ion transport processes has been widely accepted to be the alveolar type II cell. Although evidence is now emerging to suggest that the alveolar type I cell might significantly contribute to the overall ion and fluid homeostasis of the lung, direct assessment of functional ion channels in type I cells has remained elusive. Methods Here we describe a development of a lung slice preparation that has allowed positive identification of alveolar type I cells within an intact and viable alveolar epithelium using living cell immunohistochemistry. Results This technique has allowed, for the first time, single ion channels of identified alveolar type I cells to be recorded using the cell-attached configuration of the patch-clamp technique. Conclusion This exciting new development should facilitate the ascription of function to alveolar type I cells and allow us to integrate this cell type into the general model of alveolar ion and fluid balance in health and disease.

  8. Development of advanced techniques for life management and inspection of advanced heavy water reactor (AWHR) coolant channel components

    Energy Technology Data Exchange (ETDEWEB)

    Madhusoodanan, K.; Sinha, S.K.; Kumar, K.; Shyam, T.V.; Panwar, S.; Sharma, B.S.V.G. [Bhabha Atomic Research Centre, Reactor Engineering Div., Trombay, Mumbai (India); Sinha, R. K. [Bhabha Atomic Research Centre, Reactor Design and Development Group., Trombay, Mumbai (India)

    2011-07-01

    Operating life of pressure tubes of Pressurized Heavy Water Reactor (PHWR) is limited due to the presence of various issues associated with the material like hydrogen pick up, delayed hydride cracking, axial elongation and increase in diameter due to irradiation creep and growth. Periodic monitoring of the health of the pressure tube under in-situ conditions is essential to ensure the safe operation of the reactor. New designs of reactor call for innovative design philosophy, modification in fabrication route of pressure tube, development of reactor specific tools, both analytical and hardware for assessing the fitness for service of the pressure tube. Feedback from existing reactors has enhanced the understanding about life limiting parameters. This paper gives an insight into the life limiting issues associated with pressure tube and the efforts pursued for development of life management techniques for coolant channel of Advanced Heavy Water Reactor (AHWR) designed in India. The tools and techniques for in-situ property/hydrogen measurement, pulsed eddy current technique for zirconium alloy in-homogeneity characterization, horizontal shear wave EMAT system for dissimilar metal weld inspection, sliver sampling of vertical channel etc. are elaborated in the paper. (author)

  9. Development of Texture in Interstitial-Free Steel Processed by Equal-Channel Angular Pressing

    Science.gov (United States)

    Verma, Deepa; Shekhawat, Satish Kumar; Mukhopadhyay, N. K.; Sastry, G. V. S.; Manna, R.

    2016-03-01

    Ti + Nb-stabilised interstitial-free steel is deformed by equal-channel angular pressing (ECAP) adopting a route BC up to an equivalent strain of 24. Upon ECAP the grain size decreases to ultrafine level and it becomes strongly textured. At ɛvm = 0.6-6, components of both {110} fiber, J_{\\uptheta } , bar{J}_{\\uptheta } and of fiber, D 1θ, D 2θ with common components of E θ, bar{E}_{\\uptheta } are existing but after ɛvm ≥9, only fiber components are observed. At large strain, ɛvm = 9-24, fiber texture is recorded with monoclinic symmetry. At ɛvm = 0.6, coarse grains get split into deformation bands. Fragmentation of bands (at ɛvm = 3) suppress bar{J}_{\\uptheta } , J_{\\uptheta } components. At ɛvm = 6, formation of lamellar structures increases intensity of mainly D 1θ, D 2θ. At ɛvm = 9, oriented ribbon grains result in strong D 1θ, D 2θ components with fiber. At ɛvm = 15-24, conversion of ribbon grains to near-equiaxed shaped grains maintains fiber texture with enhanced intensity of D 1θ and D 2θ components.

  10. Silicon-on ceramic process: silicon sheet growth and device development for the large-area silicon sheet task of the Low-Cost Solar Array Project. Quarterly report NO. 15, April 1, 1980-June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Whitehead, A B; Zook, J D; Grung, B L; McHenry, K; Schuldt, S B; Chapman, P W

    1980-07-31

    The objective of this research is to investigate the technical feasibility of producing solar-cell-quality sheet silicon which could meet the DOE cost goals. The Honeywell approach is to coat one surface of carbonized ceramic substrates with a thin layer of large-grain polycrystalline silicon from the melt. Results and accomplishments which occurred during the quarter can be summarized as follows: (1) two major problems associated with SCIM-coating wide (10-cm) substrates were identified and solved; (2) the longitudinal temperature profile in SCIM-II has been improved to prevent substrate warping, buckling, and cracking; (3) the transverse temperature profile in SCIM II has been improved to produce more uniform coatings; (4) a strategy to eliminate effects of thermal stress has been developed; (5) the best SOC cell has a total-area conversion efficiency of 10.5% (AM1, AR), for a cell area of 5 cm/sup 2/; (6) a number of experiments are being investigated for improving cell efficiency; (7) for the slow-cooldown experiment, the average efficiency of 29 AR-coated cells was 9.9%, with a standard deviation of 0.3%; (8) encouraging results were obtained on SOC material that had been treated in a hydrogen plasma at Sandia; and (9) thermal modeling has proven to be beneficial in designing modifications of SCIM II.

  11. Developing a Comparative Docking Protocol for the Prediction of Peptide Selectivity Profiles: Investigation of Potassium Channel Toxins

    Directory of Open Access Journals (Sweden)

    Serdar Kuyucak

    2012-02-01

    Full Text Available During the development of selective peptides against highly homologous targets, a reliable tool is sought that can predict information on both mechanisms of binding and relative affinities. These tools must first be tested on known profiles before application on novel therapeutic candidates. We therefore present a comparative docking protocol in HADDOCK using critical motifs, and use it to “predict” the various selectivity profiles of several major αKTX scorpion toxin families versus Kv1.1, Kv1.2 and Kv1.3. By correlating results across toxins of similar profiles, a comprehensive set of functional residues can be identified. Reasonable models of channel-toxin interactions can be then drawn that are consistent with known affinity and mutagenesis. Without biological information on the interaction, HADDOCK reproduces mechanisms underlying the universal binding of αKTX-2 toxins, and Kv1.3 selectivity of αKTX-3 toxins. The addition of constraints encouraging the critical lysine insertion confirms these findings, and gives analogous explanations for other families, including models of partial pore-block in αKTX-6. While qualitatively informative, the HADDOCK scoring function is not yet sufficient for accurate affinity-ranking. False minima in low-affinity complexes often resemble true binding in high-affinity complexes, despite steric/conformational penalties apparent from visual inspection. This contamination significantly complicates energetic analysis, although it is usually possible to obtain correct ranking via careful interpretation of binding-well characteristics and elimination of false positives. Aside from adaptations to the broader potassium channel family, we suggest that this strategy of comparative docking can be extended to other channels of interest with known structure, especially in cases where a critical motif exists to improve docking effectiveness.

  12. HTGR fuels and core development program. Quarterly progress report for the period ending November 30, 1976. [Graphite and fuel irradiations; fission product release

    Energy Technology Data Exchange (ETDEWEB)

    1976-12-27

    The work reported includes studies of reactions between core materials and coolant impurities, basic fission product transport mechanisms, core graphite development and testing, the development and testing of recyclable fuel systems, and physics and fuel management studies. Materials studies include irradiation capsule tests of both fuel and graphite. Experimental procedures and results are discussed and the data are presented in tables, graphs, and photographs.

  13. HTGR Fuels and Core Development Program. Quarterly progress report for the period ending August 31, 1977. [Graphite and fuel irradiation; fission product release

    Energy Technology Data Exchange (ETDEWEB)

    1977-09-01

    The work reported includes studies of reactions between core materials and coolant impurities, basic fission product transport mechanisms, core graphite development and testing, the development and testing of recyclable fuel systems, and physics and fuel management studies. Materials studies include irradiation capsule tests of both fuel and graphite. Experimental procedures and results are discussed and data are presented.

  14. HTGR fuels and core development program. Quarterly progress report for the period ending November 30, 1977. [Graphite and fuel irradiation; fission product release

    Energy Technology Data Exchange (ETDEWEB)

    1977-12-01

    The work reported here includes studies of basic fission product transport mechanisms, core graphite development and testing, and the development and testing of recyclable fuel systems. Materials studied include irradiation capsule tests of both fuel and graphite. Experimental procedures and results are discussed and data are presented.

  15. Steroid hormone regulation of the voltage-gated, calcium-activated potassium channel expression in developing muscular and neural systems.

    Science.gov (United States)

    Garrison, Sheldon L; Witten, Jane L

    2010-11-01

    A precise organization of gene expression is required for developing neural and muscular systems. Steroid hormones can control the expression of genes that are critical for development. In this study we test the hypothesis that the steroid hormone ecdysone regulates gene expression of the voltage-gated calcium-activated potassium ion channel, Slowpoke or KCNMA1. Late in adult development of the tobacco hawkmoth Manduca sexta, slowpoke (msslo) levels increased contributing to the maturation of the dorsal longitudinal flight muscles (DLMs) and CNS. We show that critical components of ecdysteroid gene regulation were present during upreglation of msslo in late adult DLM and CNS development. Ecdysteroid receptor complex heterodimeric partner proteins, the ecdysteroid receptor (EcR) and ultraspiracle (USP), and the ecdysone-induced early gene, msE75B, were expressed at key developmental time points, suggesting that ecdysteroids direct aspects of gene expression in the DLMs during these late developmental stages. We provide evidence that ecdysteroids suppress msslo transcription in the DLMs; when titers decline msslo transcript levels increase. These results are consistent with msslo being a downstream gene in an ecdysteroid-mediated gene cascade during DLM development. We also show that the ecdysteroids regulate msslo transcript levels in the developing CNS. These results will contribute to our understanding of how the spatiotemporal regulation of slowpoke transcription contributes to tailoring cell excitability to the differing physiological and behavioral demands during development.

  16. Development of III-Sb based technologies for p-channel MOSFET in CMOS applications

    Science.gov (United States)

    Madisetti, Shailesh Kumar

    --V characteristics with a similarly low Dit˜1--2x1012 cm 2eV-1 were demonstrated without IPL. Next, biaxial compressive strain on InxGa1-xSb quantum wells were studied by varying In composition and studying Hall mobility to understand major scattering mechanisms in surface and buried MBE grown strained InGaSb quantum well (QW) MOSFET channels with in-situ grown Al 2O3 gate oxide are analyzed as a function of sheet hole density, top-barrier thickness and temperature. Mobility dependence on Al0.8Ga 0.2Sb top-barrier thickness shows that the relative contribution of interface-related scattering is as low as ˜30% in the surface QW channel. An InAs top capping layer reduces the interface scattering even further; the sample with 3 nm total top-barrier thickness demonstrates mobility of 980 cm2/Vs giving sheet resistance of 4.3 kO/sq, very close to the minimum QW resistance in the bulk. The mobility--temperature dependences indicate that the interface-related scattering is dominated by remote Coulomb scattering at hole densities silicon has been studied with the goal to improve the quality of group III-antimonide heteroepitaxial materials for III-Sb CMOS to assess various metamorphic buffer layer technologies, evaluate baseline for density of related defects and surface morphology, uncover their effect on electrical properties, provide baseline for futuristic growth of III-V integration on a common platform.

  17. Development of manufacturing systems for nanocrystalline and ultra-fine grain materials employing indexing equal channel angular pressing

    Science.gov (United States)

    Hester, Michael Wayne

    Nanotechnology offers significant opportunities in providing solutions to existing engineering problems as well as breakthroughs in new fields of science and technology. In order to fully realize benefits from such initiatives, nanomanufacturing methods must be developed to integrate enabling constructs into commercial mainstream. Even though significant advances have been made, widespread industrialization in many areas remains limited. Manufacturing methods, therefore, must continually be developed to bridge gaps between nanoscience discovery and commercialization. A promising technology for integration of top-down nanomanufacturing yet to receive full industrialization is equal channel angular pressing, a process transforming metallic materials into nanostructured or ultra-fine grained materials with significantly improved performance characteristics. To bridge the gap between process potential and actual manufacturing output, a prototype top-down nanomanufacturing system identified as indexing equal channel angular pressing (IX-ECAP) was developed. The unit was designed to capitalize on opportunities of transforming spent or scrap engineering elements into key engineering commodities. A manufacturing system was constructed to impose severe plastic deformation via simple shear in an equal channel angular pressing die on 1100 and 4043 aluminum welding rods. 1/4 fraction factorial split-plot experiments assessed significance of five predictors on the response, microhardness, for the 4043 alloy. Predictor variables included temperature, number of passes, pressing speed, back pressure, and vibration. Main effects were studied employing a resolution III design. Multiple linear regression was used for model development. Initial studies were performed using continuous processing followed by contingency designs involving discrete variable length work pieces. IX-ECAP offered a viable solution in severe plastic deformation processing. Discrete variable length work piece

  18. Quarterly coal report, January--March 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-24

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. The data presented in the QCR are collected and published by the Energy Information Administration (EIA) to fulfill data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275), as amended. This report presents detailed quarterly data for January through March 1995 and aggregated quarterly historical data for 1987 through the fourth quarter of 1994. Appendix A displays, from 1987 on, detailed quarterly historical coal imports data, as specified in Section 202 of the Energy Policy and Conservation Amendments Act of 1985 (Public Law 99-58). Appendix B gives selected quarterly tables converted to metric tons.

  19. Quarterly coal report, October--December 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-23

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. The data presented in the QCR are collected and published by the Energy Information Administration (EIA) to fulfill data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275), as amended. This report presents detailed quarterly data for October through December 1994 and aggregated quarterly historical data for 1986 through the third quarter of 1994. Appendix A displays, from 1986 on, detailed quarterly historical coal imports data, as specified in Section 202 of the Energy Policy and Conservation Amendments Act of 1985 (Public Law 99-58). Appendix B gives selected quarterly tables converted to metric tons.

  20. Quarterly coal report, October--December 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. The data presented in the QCR are collected and published by the Energy Information Administration (EIA) to fulfill data collection and dissemination responsibilities. This report presents detailed quarterly data for october through December 1997 and aggregated quarterly historical data for 1991 through the third quarter of 1997. Appendix A displays, from 1991 on, detailed quarterly historical coal imports data, as specified in Section 202 of the energy Policy and Conservation Amendments Act of 1985 (Public Law 99-58). Appendix B gives selected quarterly tables converted to metric tons. To provide a complete picture of coal supply and demand in the US, historical information has been integrated in this report. 8 figs., 73 tabs.

  1. Quarterly coal report, January--March 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-24

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. The data presented in the QCR are collected and published by the Energy Information Administration (EIA) to fulfill data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275), as amended. This report presents detailed quarterly data for January through March 1994 and aggregated quarterly historical data for 1986 through the fourth quarter of 1993. Appendix A displays, from 1986 on, detailed quarterly historical coal imports data, as specified in Section 202 of the Energy Policy and Conservation Amendments Act of 1985 (Public Law 99-58). Appendix B gives selected quarterly tables converted to metric tons.

  2. Development of automated welding process for field fabrication of thick walled pressure vessels. Fourth quarter technical progress report for period ending September 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    Progress in developing an automated welding process for the field fabrication of thick walled pressure vessels is reported. Plans for the demonstration facility, for nondestructive testing, and for the procurement of materials are discussed. (LCL)

  3. Sildenafil prevents the up-regulation of transient receptor potential canonical channels in the development of cardiomyocyte hypertrophy

    Energy Technology Data Exchange (ETDEWEB)

    Kiso, Hironori [Department of Internal Medicine, Division of Cardiovascular and Respiratory Medicine, Akita University Graduate School of Medicine (Japan); Ohba, Takayoshi [Department of Cell Physiology, Akita University Graduate School of Medicine (Japan); Iino, Kenji; Sato, Kazuhiro; Terata, Yutaka [Department of Internal Medicine, Division of Cardiovascular and Respiratory Medicine, Akita University Graduate School of Medicine (Japan); Murakami, Manabu [Department of Pharmacology, Hirosaki University Graduate School of Medicine (Japan); Ono, Kyoichi [Department of Cell Physiology, Akita University Graduate School of Medicine (Japan); Watanabe, Hiroyuki, E-mail: hirow@doc.med.akita-u.ac.jp [Department of Internal Medicine, Division of Cardiovascular and Respiratory Medicine, Akita University Graduate School of Medicine (Japan); Ito, Hiroshi [Department of Internal Medicine, Division of Cardiovascular and Respiratory Medicine, Akita University Graduate School of Medicine (Japan)

    2013-07-05

    Highlights: •Transient receptor potential canonical (TRPC1, 3 and 6) are up-regulated by ET-1. •Sildenafil inhibited hypertrophic responses (BNP, Ca entry, NFAT activation). •Sildenafil suppressed TRPC1, 3 and 6 expression. -- Abstract: Background: Transient receptor potential canonical (TRPCs) channels are up-regulated in the development of cardiac hypertrophy. Sildenafil inhibits TRPC6 activation and expression, leading to the prevention of cardiac hypertrophy. However, the effects of sildenafil on the expression of other TRPCs remain unknown. We hypothesized that in addition to its effects of TRPC6, sildenafil blocks the up-regulation of other TRPC channels to suppress cardiomyocyte hypertrophy. Methods and results: In cultured neonatal rat cardiomyocytes, a 48 h treatment with 10 nM endothelin (ET)-1 induced hypertrophic responses characterized by nuclear factor of activated T cells activation and enhancement of brain natriuretic peptide expression and cell surface area. Co-treatment with sildenafil (1 μM, 48 h) inhibited these ET-1-induced hypertrophic responses. Although ET-1 enhanced the gene expression of TRPCs, sildenafil inhibited the enhanced gene expression of TRPC1, C3 and C6. Moreover, co-treatment with sildenafil abolished the augmentation of SOCE in the hypertrophied cardiomyocytes. Conclusions: These results suggest that sildenafil inhibits cardiomyocyte hypertrophy by suppressing the up-regulation of TRPC expression.

  4. Nonlinear channelizer

    Science.gov (United States)

    In, Visarath; Longhini, Patrick; Kho, Andy; Neff, Joseph D.; Leung, Daniel; Liu, Norman; Meadows, Brian K.; Gordon, Frank; Bulsara, Adi R.; Palacios, Antonio

    2012-12-01

    The nonlinear channelizer is an integrated circuit made up of large parallel arrays of analog nonlinear oscillators, which, collectively, serve as a broad-spectrum analyzer with the ability to receive complex signals containing multiple frequencies and instantaneously lock-on or respond to a received signal in a few oscillation cycles. The concept is based on the generation of internal oscillations in coupled nonlinear systems that do not normally oscillate in the absence of coupling. In particular, the system consists of unidirectionally coupled bistable nonlinear elements, where the frequency and other dynamical characteristics of the emergent oscillations depend on the system's internal parameters and the received signal. These properties and characteristics are being employed to develop a system capable of locking onto any arbitrary input radio frequency signal. The system is efficient by eliminating the need for high-speed, high-accuracy analog-to-digital converters, and compact by making use of nonlinear coupled systems to act as a channelizer (frequency binning and channeling), a low noise amplifier, and a frequency down-converter in a single step which, in turn, will reduce the size, weight, power, and cost of the entire communication system. This paper covers the theory, numerical simulations, and some engineering details that validate the concept at the frequency band of 1-4 GHz.

  5. Quarterly coal report, April--June 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-11-02

    The Quarterly Coal Report provides comprehensive information about US coal production, exports, imports, receipts, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. This issue presents detailed quarterly data for April 1990 through June 1990, aggregated quarterly historical data for 1982 through the second quarter of 1990, and aggregated annual historical data for 1960 through 1989 and projected data for selected years from 1995 through 2010. To provide a complete picture of coal supply and demand in the United States, historical information and forecasts have been integrated in this report. 7 figs., 37 tabs.

  6. Short-term energy outlook, quarterly projections, second quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    The Energy Information Administration (EIA) prepares quarterly short-term energy supply, demand, and price projections. The details of these projections, as well as monthly updates, are available on the Internet at: www.eia.doe.gov/emeu/steo/pub/contents.html. The paper discusses outlook assumptions; US energy prices; world oil supply and the oil production cutback agreement of March 1998; international oil demand and supply; world oil stocks, capacity, and net trade; US oil demand and supply; US natural gas demand and supply; US coal demand and supply; US electricity demand and supply; US renewable energy demand; and US energy demand and supply sensitivities. 29 figs., 19 tabs.

  7. Applied Meteorology Unit (AMU) Quarterly Report Third Quarter FY-08

    Science.gov (United States)

    Bauman, William; Crawford, Winifred; Barrett, Joe; Watson, Leela; Dreher, Joseph

    2008-01-01

    This report summarizes the Applied Meteorology Unit (AMU) activities for the third quarter of Fiscal Year 2008 (April - June 2008). Tasks reported on are: Peak Wind Tool for User Launch Commit Criteria (LCC), Anvil Forecast Tool in AWIPS Phase II, Completion of the Edward Air Force Base (EAFB) Statistical Guidance Wind Tool, Volume Averaged Height Integ rated Radar Reflectivity (VAHIRR), Impact of Local Sensors, Radar Scan Strategies for the PAFB WSR-74C Replacement, VAHIRR Cost Benefit Analysis, and WRF Wind Sensitivity Study at Edwards Air Force Base

  8. Short-term energy outlook. Quarterly projections, Third quarter 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-02

    The Energy Information Administration (EIA) prepares quarterly, short-term energy supply, demand, and price projections for publication in February, May, August, and November in the Short-Term Energy Outlook (Outlook). An annual supplement analyzes the performance of previous forecasts, compares recent cases with those of other forecasting services, and discusses current topics related to the short-term energy markets. (See Short-Term Energy Outlook Annual Supplement, DOE/EIA-0202). The feature article for this issue is Demand, Supply and Price Outlook for Reformulated Gasoline, 1995.

  9. Engineering development of coal-fired high performance power systems, Phase II and Phase III. Quarter progress report, April 1, 1996--June 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    Work is presented on the development of a coal-fired high performance power generation system by the year 2000. This report describes the design of the air heater, duct heater, system controls, slag viscosity, and design of a quench zone.

  10. HTGR Generic Technology Program: materials technology reactor; operating experience; medium-enriched-uranium fuel development. Quarterly progress report for the period ending July 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-01

    The work reported includes the development of the materials properties data base for noncore components, plant surveillance and testing performed at Fort St. Vrain, and work to demonstrate the feasibility of using medium-enriched fuel in Fort St. Vrain. Studies and analyses plus experimental procedures and results are discussed and data are presented.

  11. HTGR Generic Technology Program. Materials technology reactor operating experience medium-enriched-uranium fuel development. Quarterly progress report for the period ending April 30, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Kaae, J. L.; Lai, G. Y.; Thompson, L. D.; Sheehan, J. E.; Rosenwasser, S. N.; Johnson, W. R.; Li, C. C.; Pieren, W. R.; Smith, A. B.; Holko, K. H.; Baenteli, G. J.; Cheung, K. C.; Orr, J. D.; Potter, R. C.; Baxter, A.; Bell, W.; Lane, R.; Wunderlich, R. G.; Neylan, A. J.

    1978-05-01

    The work reported includes the development of the materials properties data base for noncore components, plant surveillance and testing performed at Fort St. Vrain, and work to demonstrate the feasibility of using medium-enriched fuel in Fort St. Vrain. Studies and analyses plus experimental procedures and results are discussed and data are presented.

  12. 3-lead acquisition using single channel ECG device developed on AD8232 analog front end for wireless ECG application

    Science.gov (United States)

    Agung, Mochammad Anugrah; Basari

    2017-02-01

    Electrocardiogram (ECG) devices measure electrical activity of the heart muscle to determine heart conditions. ECG signal quality is the key factor in determining the diseases of the heart. This paper presents the design of 3-lead acquistion on single channel wireless ECG device developed on AD8232 chip platform using microcontroller. To make the system different from others, monopole antenna 2.4 GHz is used in order to send and receive ECG signal. The results show that the system still can receive ECG signal up to 15 meters by line of sight (LOS) condition. The shape of ECG signals is precisely similar with the expected signal, although some delays occur between two consecutive pulses. For further step, the system will be applied with on-body antenna in order to investigate body to body communication that will give variation in connectivity from the others.

  13. Development of a 2-Channel Embedded Infrared Fiber-Optic Temperature Sensor Using Silver Halide Optical Fibers

    Directory of Open Access Journals (Sweden)

    Bongsoo Lee

    2011-10-01

    Full Text Available A 2-channel embedded infrared fiber-optic temperature sensor was fabricated using two identical silver halide optical fibers for accurate thermometry without complicated calibration processes. In this study, we measured the output voltages of signal and reference probes according to temperature variation over a temperature range from 25 to 225 °C. To decide the temperature of the water, the difference between the amounts of infrared radiation emitted from the two temperature sensing probes was measured. The response time and the reproducibility of the fiber-optic temperature sensor were also obtained. Thermometry with the proposed sensor is immune to changes if parameters such as offset voltage, ambient temperature, and emissivity of any warm object. In particular, the temperature sensing probe with silver halide optical fibers can withstand a high temperature/pressure and water-chemistry environment. It is expected that the proposed sensor can be further developed to accurately monitor temperature in harsh environments.

  14. Fully Developed Flow of Fourth Grade Fluid through the Channel with Slip Condition in the Presence of a Magnetic Field

    Directory of Open Access Journals (Sweden)

    P. Ghasemi Moakher

    2016-01-01

    Full Text Available In this paper, to study the incompressible fully developed flow of a non-Newtonian fourth grade fluid in a flat channel under an externally applied magnetic field, an appropriate analysis has been performed considering the slip condition on the walls. The governing equations, Ohm’s law, continuity and momentum for this problem are reduced to a nonlinear ordinary form. The nonlinear equation with robin mixed boundary condition is solved with collocation (CM and least square (LSM methods. The effects of parameters such as non-Newtonian, magnetic field and slip parameters on dimensionless velocity profiles will be discussed. In the end, the results could bring us to this conclusion that collocation and least square methods can be used for solving nonlinear differential equations with robin mixed condition.

  15. TEMPERATURE PROFILES OF LOCAL THERMAL NONEQUILIBRIUM FOR THERMAL DEVELOPING FORCED CONVECTION IN POROUS MEDIUM PARALLEL PLATE CHANNEL

    Institute of Scientific and Technical Information of China (English)

    YANG Xiao; LIU Xue-mei

    2006-01-01

    Based on the two-energy equation model, taking into account viscous dissipation due to the interaction between solid skeleton and pore fluid flow, temperature expressions of the solid skeleton and pore fluid flow are obtained analytically for the thermally developing forced convection in a saturated porous medium parallel plate channel,with walls being at constant temperature. It is proved that the temperatures of the two phases for the local thermal nonequilibrium approach to the temperature derived from the one-energy equation model for the local thermal equilibrium when the heat exchange coefficient goes to infinite. The temperature profiles are shown in figures for different dimensionless parameters and the effects of the parameters on the local thermal nonequilibrium are revealed by parameter study.

  16. Development of an advanced, continuous mild gasification process for the production of co-products. Quarterly report, January 1994--March 1994

    Energy Technology Data Exchange (ETDEWEB)

    O`Neal, G.W.

    1994-04-01

    The primary objective of this project is to develop an advanced continuous mild gasification process and product upgrading processes which will be capable of eventual commercialization. This program consists of four tasks. Task 1 is a literature survey of mild gasification processes and product upgrading methods and also a market assessment for mild gasification products. Based on the literature survey, a mild gasification process and char upgrading method will be identified for further development. Task 2 is a bench-scale investigation of mild gasification to generate data for a larger scale reactor. Task 3 is a bench-scale study of char upgrading to value added products. Task 4 is being implemented by building and operating a 1000-pound per hour demonstration facility. Task 4 also includes a technical and economic evaluation based on the performance of the mild gasification demonstration facility.

  17. Development of automated welding processes for field fabrication of thick-walled pressure vessels: electron beam method. Sixth quarterly report, January 1-March 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Weber, C.M.

    1979-01-01

    Research is reported of a project to develop and demonstrate an electron beam welding procedure for welding 8'' thick SA 387 Grade 22 Class 2 (2-1/4 Cr-1 Mo) steel. A total of 414 welds have been made to date. Partial penetration welding procedures capable of producing defect-free, 4'' welds have been developed in the horizontal position. Beam oscillation conditions strongly influence welding performance. Defect-free, partial penetration welds have been made at vacuum pressures of up to 30 microns. Several 8'' thick, defect-free welds have been made in the horizontal position. Attempts to produce defect-free, partial penetration welds in the vertical position have been unsuccessful.

  18. Engineering development of advanced physical fine coal cleaning technologies: Froth flotation. Quarterly technical progress report No. 16, July 1, 1992--September 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    A study conducted by Pittsburgh Energy Technology Center of sulfur emissions from about 1,300 United States coal-fired utility boilers indicated that half of the emissions were the result of burning coals having greater than 1.2 pounds of SO{sub 2} per million BTU. This was mainly attributed to the high pyritic sulfur content of the boiler fuel. A significant reduction in SO{sub 2} emissions could be accomplished by removing the pyrite from the coals by advanced physical fine coal cleaning. An engineering development project was prepared to build upon the basic research effort conducted under a solicitation for research into Fine Coal Surface Control. The engineering development project is intended to use general plant design knowledge and conceptualize a plant to utilize advanced froth flotation technology to process coal and produce a product having maximum practical pyritic sulfur reduction consistent with maximum practical BTU recovery.

  19. Development of advanced NO{sub x} control concepts for coal-fired utility boilers. Quarterly technical progress report No. 2, January 1--March 31, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Newhall, J.; England, G.; Seeker, W.R.

    1991-12-23

    Energy and Environmental Research Corporation (EER) is currently conducting a test program to develop an advanced NO{sub x} control method utilizing reburning, promoted selective noncatalytic agent injection. The study will consist of fundamental and process testing over a large enough range of operating parameters to significantly reduce the risk of a full scale demonstration project. The test plan for the fundamental testing phase of the program is presented here.

  20. Functional upregulation of nav1.8 sodium channels on the membrane of dorsal root Ganglia neurons contributes to the development of cancer-induced bone pain.

    Directory of Open Access Journals (Sweden)

    Xiao-Dan Liu

    Full Text Available We have previously reported that enhanced excitability of dorsal root ganglia (DRG neurons contributes to the development of bone cancer pain, which severely decreases the quality of life of cancer patients. Nav1.8, a tetrodotoxin-resistant (TTX-R sodium channel, contributes most of the sodium current underlying the action potential upstroke and accounts for most of the current in later spikes in a train. We speculate that the Nav1.8 sodium channel is a potential candidate responsible for the enhanced excitability of DRG neurons in rats with bone cancer pain. Here, using electrophysiology, Western blot and behavior assays, we documented that the current density of TTX-R sodium channels, especially the Nav1.8 channel, increased significantly in DRG neurons of rats with cancer-induced bone pain. This increase may be due to an increased expression of Nav1.8 on the membrane of DRG neurons. Accordantly, blockade of Nav1.8 sodium channels by its selective blocker A-803467 significantly alleviated the cancer-induced mechanical allodynia and thermal hyperalgesia in rats. Taken together, these results suggest that functional upregulation of Nav1.8 channels on the membrane of DRG neurons contributes to the development of cancer-induced bone pain.

  1. Ion channels and transporters in the development of drug resistance in cancer cells

    DEFF Research Database (Denmark)

    Hoffmann, Else Kay; Lambert, Ian Henry

    2014-01-01

    Multi-drug resistance (MDR) to chemotherapy is the major challenge in the treatment of cancer. MDR can develop by numerous mechanisms including decreased drug uptake, increased drug efflux and the failure to undergo drug-induced apoptosis. Evasion of drug-induced apoptosis through modulation of ion...

  2. Onychomycosis in close quarter living review of the literature.

    Science.gov (United States)

    Gazes, Michael I; Zeichner, Joshua

    2013-11-01

    Onychomycosis is defined as a fungal infection of the nail bed and/or nail plate. The prevalence of onychomycosis has increased dramatically as a worldwide condition in the twentieth century due to occlusive footwear, global wars and natural migration. Risk factors generally leading to onychomycosis development include bodily spread of dermatophyte and non-dermatophyte tinea pedis, peripheral vascular disease, damaged nails via sports and trauma, older age, genetics, immunodeficiency and diabetes. Many publications discuss prevalence, symptoms and treatment of the disease in individual cases, hospitals or specific locations, but few strongly link the cause of onychomycosis to living environments. This is a review of the current literature on the prevalence of onychomycosis and its relationship to surrounding living environments of those infected. A Pubmed search was performed with 'onychomycosis'. Articles were selected based on the relevance to close quarter living environments. All ages can be affected with onychomycosis, ranging from children in boarding schools to elderly in nursing homes. Although not directly linking living environments to transmission and infection in all articles reviewed, onychomycosis was very prevalent in many different close quarter living settings, including within families, boarding schools, military quarters and nursing homes. This review demonstrates that various close quarter living environments are highly associated with increased transmission and infection with onychomycosis.

  3. Environmental Biosciences Program Quarterly Report

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence C. Mohr, M.D.

    2009-01-30

    Current research projects have focused Environmental Biosciences Program (EBP) talent and resources on providing the scientific basis for risk-based standards, risk-based decision making and the accelerated clean-up of widespread environmental hazards. These hazards include trichloroethylene, low-dose ionizing radiation (gamma and neutron) and alpha radiation from plutonium. Trichloroethylene research has been conducted as a joint collaborative effort with the University of Georgia. Work on the trichloroethylene research projects has been slowed as a result of funding uncertainties. The impact of these funding uncertainties has been discussed with the United States Department of Energy (DOE). Laboratory work has been completed on several trichloroethylene risk assessment projects, and these projects have been brought to a close. Plans for restructuring the performance schedule of the remaining trichloroethylene projects have been submitted to the department. A comprehensive manuscript on the scientific basis of trichloroethylene risk assessment is in preparation. Work on the low-dose radiation risk assessment projects is also progressing at a slowed rate as a result of funding uncertainties. It has been necessary to restructure the proponency and performance schedule of these projects, with the project on Low-Dose Radiation: Epidemiology Risk Models transferred to DOE Office of Science proponency under a separate funding instrument. Research on this project will continue under the provisions of the DOE Office of Science funding instrument, with progress reported in accordance with the requirements of that funding instrument. Progress on that project will no longer be reported in quarterly reports for DE-FC09-02CH11109. Following a meeting at the Savannah River Site on May 8, 2008, a plan was submitted for development of an epidemiological cohort study and prospective medical surveillance system for the assessment of disease rates among workers at the Savannah River

  4. Coexpression of high-voltage-activated ion channels Kv3.4 and Cav1.2 in pioneer axons during pathfinding in the developing rat forebrain.

    Science.gov (United States)

    Huang, Chia-Yi; Chu, Dachen; Hwang, Wei-Chao; Tsaur, Meei-Ling

    2012-11-01

    Precise axon pathfinding is crucial for establishment of the initial neuronal network during development. Pioneer axons navigate without the help of preexisting axons and pave the way for follower axons that project later. Voltage-gated ion channels make up the intrinsic electrical activity of pioneer axons and regulate axon pathfinding. To elucidate which channel molecules are present in pioneer axons, immunohistochemical analysis was performed to examine 14 voltage-gated ion channels (Kv1.1-Kv1.3, Kv3.1-Kv3.4, Kv4.3, Cav1.2, Cav1.3, Cav2.2, Nav1.2, Nav1.6, and Nav1.9) in nine axonal tracts in the developing rat forebrain, including the optic nerve, corpus callosum, corticofugal fibers, thalamocortical axons, lateral olfactory tract, hippocamposeptal projection, anterior commissure, hippocampal commissure, and medial longitudinal fasciculus. We found A-type K⁺ channel Kv3.4 in both pioneer axons and early follower axons and L-type Ca²⁺ channel Cav1.2 in pioneer axons and early and late follower axons. Spatially, Kv3.4 and Cav1.2 were colocalized with markers of pioneer neurons and pioneer axons, such as deleted in colorectal cancer (DCC), in most fiber tracts examined. Temporally, Kv3.4 and Cav1.2 were expressed abundantly in most fiber tracts during axon pathfinding but were downregulated beginning in synaptogenesis. By contrast, delayed rectifier Kv channels (e.g., Kv1.1) and Nav channels (e.g., Nav1.2) were absent from these fiber tracts (except for the corpus callosum) during pathfinding of pioneer axons. These data suggest that Kv3.4 and Cav1.2, two high-voltage-activated ion channels, may act together to control Ca²⁺ -dependent electrical activity of pioneer axons and play important roles during axon pathfinding.

  5. Weldon Spring Site Remedial Action Project quarterly environmental data summary (QEDS) for fourth quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    This report contains the Quarterly Environmental Data Summary (QEDS) for the fourth quarter of 1998 in support of the Weldon Spring Site Remedial Action Project Federal Facilities Agreement. The data, except for air monitoring data and site KPA generated data (uranium analyses) were received from the contract laboratories, verified by the Weldon Spring Site verification group, and merged into the database during the fourth quarter of 1998. KPA results for on-site total uranium analyses performed during fourth quarter 1998 are included. Air monitoring data presented are the most recent complete sets of quarterly data.

  6. Development of a catalyst for conversion of syngas-derived materials to isobutylene. Quarterly report, 1 January 1995--31 March 1995

    Energy Technology Data Exchange (ETDEWEB)

    Barger, P.T.; Kurek, P.R.

    1995-12-31

    The goals of this project are to develop a catalyst and process for the conversion of syngas to isobutanol. The research will identify and optimize key catalyst characteristics. In addition, the commercial potential of the new process will be evaluated by an economic analysis. Previous work identified Pt or Pd on Zn/Mn/Zr co-precipitated metal oxides as promising catalysts for the conversion of a 10/1 methanol/ethanol blend to higher oxygenates. Supports with high Zn (>45%) and low Zr (< 33%) have afforded the best selectivities for the desired branched C{sub 4} products in the standard pilot plant test after impregnation with 2% Pt. In this report the analytical characterization of this series of materials is summarized. A large scale preparation of Zn/Mn/Zr oxide support has been completed for use in future process variable studies.

  7. Development of Rolling Schedules for Equal Channel Angular Extrusion (ECAE)-Processed AZ31 Magnesium Alloy

    Science.gov (United States)

    2016-04-01

    failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE...processed AZ31 magnesium plates have been developed. Using a temperature of 300 °C and a 10% reduction per rolling pass, the initially 9-mm-thick plates were... measured ductility along the longitudinal and transverse directions, respectively, than does texture C. 15. SUBJECT TERMS magnesium, AZ31, ECAE

  8. Design and Development of Low Cost Multi-Channel USB Data

    OpenAIRE

    2012-01-01

    This paper describes the design and development of low cost USB Data Acquisition System (DAS) for the measurement of physical parameters. Physical parameters such as temperature, humidity, light intensity etc., which are generally slowly varying signals are sensed by respective sensors or integrated sensors and converted into voltages. The DAS is designed using PIC18F4550 microcontroller, communicating with Personal Computer (PC) through USB (Universal Serial Bus). The designed DAS has been t...

  9. Development and Testing of an In Vitro Assay for Screening of Potential Therapeutic Agents Active against Na Channel Neurotoxins

    Science.gov (United States)

    1991-04-12

    to produce approximately half-maximal effects mediated through these different sodium channel sites in the assay. Thus, the binding of [3HJBTX-B should...experiments with I3H]STX, yielding the unexpected result that effects of HM-197 are not mediated through the TTX/STX sodium channel binding site. Additional...Scorpion toxin; Screening; nA Pyrethroids; Radioligand binding; Synaptoneurosomes; RA 1 ; nA I ~ I ITherapeutic agents; Sodium channel 19. ABSTRACT

  10. The National Real Estate Market In the Past Three Quarters

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In the past three quarters,investment in real estate development totaled 3351.1 billion yuan($504.2 billion),up by 36.4 percent year on year,of which,investment in residential buildings reached 2.35 trillion yuan($353.7 billion),representing a 33.8-percent increase year on year and accounting for 70.2 percent of the investment in real estate development.

  11. Research and development of a Proton-Exchange-Membrane (PEM) fuel cell system for transportation applications. Progress report for Quarter 8 of the Phase II effort, July 1, 1996--September 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-08

    This eighth quarterly report summarizes activity from July 1, 1996 through September 30, 1996. The report is organized in sections describing background information and work performed under the main work breakdown structure (WBS) categories. The WBS categories included are fuel processor, fuel cell stack, and system integration and controls. Program scheduling and task progress are presented in the appendix.

  12. Design, build, develop, and test a fieldworthy spiral tool and packer for casing repair. Quarterly report, June 16, 1992--September 15, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Koster, C.

    1992-10-01

    A new method for sealing casing is currently under development by Nu-Bore Systems. The method involves internally lining a section of the wellbore with a multi-layer spiral wrapping of a high strength, corrosion resistant metal interleaved with a high bond strength, resilient epoxy. The high strength metal is preferably a copper based alloy hardened to a very high strength in order to resist the internal and external pressures of downhole environments. The epoxy adhesive formulation is one that forms a bond between the steel inner wall of the casing and copper alloy strip. The copper alloy strip spiral wraps are interleaved with epoxy, and the whole system provides a high level of outward directed spring force and, thus, resists both internal and externally directed forces. This method has been assessed by the Department of Energy, and the magnitude of the oilfield need and the technology are described in a DoE report entitled, ``Downhole Casing Repair System`` (OERI Number 013152). In this report, the cost savings to the nation`s energy program was estimated to be in the range of hundreds of millions of dollars per year, and the method was judged technically feasible once certain well defined engineering obstacles are overcome.

  13. Engineering development of coal-fired high performance power systems, Phases 2 and 3. Quarterly progress report, October 1--December 31, 1996. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The goals of this program are to develop a coal-fired high performance power generation system (HIPPS) by the year 2000 that is capable of: {gt} 47% efficiency (HHV); NO{sub x}, SO{sub x}, and particulates {gt} 10% NSPS; coal providing {ge} 65% of heat input; all sold wastes benign; and cost of electricity 90% of present plant. Work reported herein is from Task 1.3 HIPPS Commercial Plant Design, Task 2,2 HITAF Air Heater, and Task 2.4 Duct Heater Design. The impact on cycle efficiency from the integration of various technology advances is presented. The criteria associated with a commercial HIPPS plant design as well as possible environmental control options are presented. The design of the HITAF air heaters, both radiative and convective, is the most critical task in the program. In this report, a summary of the effort associated with the radiative air heater designs that have been considered is provided. The primary testing of the air heater design will be carried out in the UND/EERC pilot-scale furnace; progress to date on the design and construction of the furnace is a major part of this report. The results of laboratory and bench scale activities associated with defining slag properties are presented. Correct material selection is critical for the success of the concept; the materials, both ceramic and metallic, being considered for radiant air heater are presented. The activities associated with the duct heater are also presented.

  14. Development of a catalyst for conversion of syngas-derived materials to isobutylene. Quarterly report number 19, October 1--December 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Spehlmann, B.C.

    1996-07-01

    The goals of this project are to develop a catalyst and process for the conversion of syngas to isobutanol. After identification and optimization of key catalyst and process characteristics, the commercial potential of the process is to be evaluated by an economic analysis. From independent process variable studies to investigate the conversion of a methanol/ethanol feed to isobutanol, the best performance to date has been achieved with the 2% Pt on Zn/Mn/Zr oxide catalyst. Using Hyprotech Hysim v2.5 process simulation software, and considering both gas and liquid recycle loops in the process flow diagram, the overall carbon conversion is 98% with 22% selectivity to isobutanol. The expected production of isobutanol is 92 MT/day from 500 MT/day of methanol and 172 MT/day of ethanol feed. An additional 13 MT/day of isobutryaldehyde intermediate is recovered in the liquid product and vent streams. Because of the low selectivity (22%) of the methanol conversion catalyst to isobutanol, the process is uneconomical, even if the isobutanol is valued as a solvent ($903/MT) and not as isobutylene for MTBE production ($352/MT).

  15. Diagnostic technology for degradation of feeder pipe and fuel channel; design of nuclear fuel channel mock-up and development of signature analysis technique for its condition monitoring system

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S. K. [Inha University, Incheon (Korea)

    2002-04-01

    The main purpose of this project is to design the nuclear fuel channel and to develope the signal analysis method for the nonstationary signal. The design of mock-up is necessary for the pre-test of the nuclear plant. The fault signal due to the damage of the nuclear plant is generally nonstationary. It is difficult to analysis this non-stationary signal using traditional method. Thus in this research, time-frequency analysis, and wavelet transform are studied for the analysis of nonstationary signal. Basic program for analysis of nonstationary signal embedded in the background noise is developed. Results from this research can be applied to the early detection of damage of nuclear fuel channel. However, in order to apply to the real nuclear plant, further research project should be processed through the mock-up test. Then that result can be applied to the condition monitoring of a real nuclear plant. 10 refs., 18 figs., 2 tabs. (Author)

  16. Development and application of a channelized Hotelling observer for DBT optimization on structured background test images with mass simulating targets

    Science.gov (United States)

    Petrov, Dimitar; Michielsen, Koen; Cockmartin, Lesley; Zhang, Gouzhi; Young, Kenneth; Marshall, Nicholas; Bosmans, Hilde

    2016-03-01

    Digital breast tomosynthesis (DBT) is a 3D mammography technique that promises better visualization of low contrast lesions than conventional 2D mammography. A wide range of parameters influence the diagnostic information in DBT images and a systematic means of DBT system optimization is needed. The gold standard for image quality assessment is to perform a human observer experiment with experienced readers. Using human observers for optimization is time consuming and not feasible for the large parameter space of DBT. Our goal was to develop a model observer (MO) that can predict human reading performance for standard detection tasks of target objects within a structured phantom and subsequently apply it in a first comparative study. The phantom consists of an acrylic semi-cylindrical container with acrylic spheres of different sizes and the remaining space filled with water. Three types of lesions were included: 3D printed spiculated and non-spiculated mass lesions along with calcification groups. The images of the two mass lesion types were reconstructed with 3 different reconstruction methods (FBP, FBP with SRSAR, MLTRpr) and read by human readers. A Channelized Hotelling model observer was created for the non-spiculated lesion detection task using five Laguerre-Gauss channels, tuned for better performance. For the non-spiculated mass lesions a linear relation between the MO and human observer results was found, with correlation coefficients of 0.956 for standard FBP, 0.998 for FBP with SRSAR and 0.940 for MLTRpr. Both the MO and human observer percentage correct results for the spiculated masses were close to 100%, and showed no difference from each other for every reconstruction algorithm.

  17. Advanced development of fine coal desulfurization and recovery technology. Quarterly technical progress report, October 1, 1976--December 31, 1976. [53 references

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, R.W.; Wheelock, T.D.

    1977-02-01

    The improvement and technical development of promising methods for desulfurizing and recovering fine coal underway includes froth flotation, selective oil agglomeration, pelletization, and a chemical desulfurization process which involves leaching fine coal with a hot dilute solution of sodium carbonate containing dissolved oxygen under pressure. A preliminary assessment of the state of the art and review of the technical literature has been made. Equipment and apparatus have been assembled for small-scale laboratory experiments in froth flotation, oil agglomeration and chemical desulfurization. Preliminary froth flotation tests have been carried out on an Iowa coal to establish baseline data. Quite unexpectedly these tests indicated that aluminum nitrate may be an activator for coal because it served to increase the recovery of coal. Several potential flotation depressants for pyrite have been screened by measurement at the zeta potential and floatability of pyrite or coal in aqueous suspensions containing the potential depressants. The following reagents show some promise as pyrite depressants: ferric chloride, sodium cyanide, ammonium thiocyanate, and the disodium salt of ethylenediaminetetraacetic acid. Preliminary plans have been prepared for a continuous flow bench-scale system to demonstrate the process. This system will include equipment for grinding and pretreating the coal as well as equipment for demonstrating froth flotation, selective oil agglomeration and pelletization. An investigation of coal microstructure as it relates to coal beneficiation methods has also been initiated. The distribution of various forms of pyrite by size and crystal structure has been determined for two cannel samples of coal through application of scanning electron microscope techniques.

  18. Research on the Development Trend of China's Seed Marketing Channels%中国种子营销渠道发展趋势研究

    Institute of Scientific and Technical Information of China (English)

    罗必灿

    2015-01-01

    Influenced by a variety of external factors, the marketing channels of China's seed industry have experienced stages of "three-level wholesale business channel", "three(two)-level agent distribution channel", and "the current exploration of multi-channels model" successively. Based on analyzing the present marketing channel models of several main seed indus-tries and the major influence factors determining future seed marketing, it suggested that the development trend of China's seed marketing channels should focus on considering the brand franchisee, highlighted service, to realize high - throughput information-sharing, value collaboration degree and implement flat information management, and other peripheral aspects.%简述了中国种子营销渠道的发展先后经历了"三级批发经营渠道"、"三(二)级代理分销渠道"及当前多种渠道模式探索等多个阶段,分析了当前几种主要的种子营销渠道模式及未来决定种子营销的主要影响因素,提出了中国种子营销渠道未来的发展趋势应着重考虑品牌专营、突出服务、实现高通量信息共享、重视协作度、实施扁平化管理等方面.

  19. Idaho National Laboratory Quarterly Occurrence Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-11-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 85 reportable events (18 from the 4th Qtr FY-15 and 67 from the prior three reporting quarters), as well as 25 other issue reports (including events found to be not reportable and Significant Category A and B conditions) identified at INL during the past 12 months (8 from this quarter and 17 from the prior three quarters).

  20. An investigation on research and development cost reduction and channel strategies in competing supply chains

    Directory of Open Access Journals (Sweden)

    Qinqin Li

    2014-06-01

    Full Text Available With the intensification of market competition, the competition form of firms is evolving from the competition among firms to the competition among supply chains. This paper considers a market with two competing supply chains consisting of one supplier and one manufacturer. The two supply chains compete on products’ quantities and research and development (R&D level when the two manufacturers conduct technological innovation. This paper analyses the supply chain competition in three scenarios: two decentralized supply chains (DD, one decentralized supply chain and one centralized supply chain (DC and two centralized supply chains (CC. The results indicate that the production quantity, the R&D level and the total profit of the integrated supply chain in DC scenario are the largest, CC scenario comes second, those of the DD scenario come third and those of the decentralized supply chain in DC scenario are the smallest. CC strategy is the supply chain system’s Nash equilibrium, which is good for the both supply chains, and there is no prisoner's dilemma.

  1. Computational Fluid Dynamics and Visualisation of Coastal Flows in Tidal Channels Supporting Ocean Energy Development

    Directory of Open Access Journals (Sweden)

    Enayatollah Zangiabadi

    2015-06-01

    Full Text Available Flow characteristics in coastal regions are strongly influenced by the topography of the seabed and understanding the fluid dynamics is necessary before installation of tidal stream turbines (TST. In this paper, the bathymetry of a potential TST deployment site is used in the development of the a CFD (Computational Fluid Dynamics model. The steady state k-ϵ and transient Large Eddy Simulation (LES turbulence methods are employed and compared. The simulations are conducted with a fixed representation of the ocean surface, i.e., a rigid lid representation. In the vicinity of Horse Rock a study of the pressure difference shows that the small change in height of the water column is negligible, providing confidence in the simulation results. The stream surface method employed to visualise the results has important inherent characteristics that can enhance the visual perception of complex flow structures. The results of all cases are compared with the flow data transect gathered by an Acoustic Doppler Current Profiler (ADCP. It has been understood that the k-ϵ method can predict the flow pattern relatively well near the main features of the domain and the LES model has the ability to simulate some important flow patterns caused by the bathymetry.

  2. Inlet effects on roll-wave development in shallow turbulent open-channel flows

    Directory of Open Access Journals (Sweden)

    Campomaggiore Francesca

    2016-03-01

    Full Text Available The present work investigates the effect of the flow profile induced by an inlet condition on the roll-wave evolution in turbulent clear-water flows. The study employs theoretical and numerical analyses. Firstly, the influence of the inlet condition on the spatial evolution of a single perturbation in a hypercritical flow is examined through the expansion near a wavefront analysis. The results show that an accelerated unperturbed profile reduces the disturbance spatial growth. A decelerated profile causes an increase. The effect of the flow profile on the spatial evolution of roll-wave trains is then numerically investigated solving the Saint Venant equations with a second-order Runge-Kutta Total Variation Diminishing (TVD Finite Volume scheme. The numerical simulations comply with the analytical results for the initial and transition phases of the roll-wave development. The unperturbed profile influences even the roll-waves statistical characteristics in the final stage, with a more evident effect in case of accelerated profiles. The influence of the flow profile should be therefore accounted for in the formulation of predictive criteria for roll-waves appearance based on the estimation of the disturbance spatial growth rate.

  3. Development of Ribbon Fiber Type Multi-Channel Power Level Monitor with Low-Insertion/Polarization Loss

    Institute of Scientific and Technical Information of China (English)

    Maki; Inai; Akira; Haraguchi; Takeo; Komiya; Kiyotaka; Murashima; Takashi; Sasaki; Kazuhito; Saitoh

    2003-01-01

    We would like to propose a new in-line multi-channel power level monitor, which is applicable as tap-monitor for multi-channel WDM signals. Its ribbon fiber structure has far exceeded PLC performance and realized compact-size and lower insertion/polarization dependent loss.

  4. Silicon-on-ceramic solar cell development. Solar cell development for the cell development task of the Low-Cost Solar Array Project. Quarterly report No. 1, February 15--June 30, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, P W; Grung, B L; Zook, J D

    1978-07-30

    The objective of this program is to investigate unique cell processing/design approaches to the successful fabrication of high-performance solar cells on silicon-on-ceramic (SOC) material. The work in the cell development area consists of two broad categories of activities: (1) the development of standard cell processing techniques, and (2) the investigation of novel device design approaches. The first area of activity has to do with the development of processing techniques for use with silicon dipped on ''slotted'' ceramic substrates. This embodiment allows us to make contact to the back surface of the silicon, thereby minimizing the front surface contact area. The second activity area is initially concerned with producing a ''stripe'' geometry cell on an unslotted ceramic substrate. The idea here is to expose the base layer for electrical contact on the top surface of the substrate and make up for the lost cell area by using an optical collector. Progress is reported.

  5. Applied Meteorology Unit (AMU) Quarterly Report - Fourth Quarter FY-10

    Science.gov (United States)

    Bauman, William; Crawford, Winifred; Barrett, Joe; Watson, Leela; Wheeler, Mark

    2010-01-01

    Three AMU tasks were completed in this Quarter, each resulting in a forecast tool now being used in operations and a final report documenting how the work was done. AMU personnel completed the following tasks (1) Phase II of the Peak Wind Tool for General Forecasting task by delivering an improved wind forecasting tool to operations and providing training on its use; (2) a graphical user interface (GUI) she updated with new scripts to complete the ADAS Update and Maintainability task, and delivered the scripts to the Spaceflight Meteorology Group on Johnson Space Center, Texas and National Weather Service in Melbourne, Fla.; and (3) the Verify MesoNAM Performance task after we created and delivered a GUI that forecasters will use to determine the performance of the operational MesoNAM weather model forecast.

  6. Biomedical engineering meets acupuncture - development of a miniaturized 48-channel skin impedance measurement system for needle and laser acupuncture

    Directory of Open Access Journals (Sweden)

    Wang Lu

    2010-11-01

    Full Text Available Abstract Background Due to controversially discussed results in scientific literature concerning changes of electrical skin impedance before and during acupuncture a new measurement system has been developed. Methods The prototype measures and analyzes the electrical skin impedance computer-based and simultaneously in 48 channels within a 2.5×3.5 cm matrix. Preliminary measurements in one person were performed using metal needle and violet laser (405 nm acupuncture at the acupoint Kongzui (LU6. The new system is an improvement on devices previously developed by other researchers for this purpose. Results Skin impedance in the immediate surroundings of the acupoint was lowered reproducibly following needle stimulation and also violet laser stimulation. Conclusions A new instrumentation for skin impedance measurements is presented. The following hypotheses suggested by our results will have to be tested in further studies: Needle acupuncture causes significant, specific local changes of electrical skin impedance parameters. Optical stimulation (violet laser at an acupoint causes direct electrical biosignal changes.

  7. Biomedical engineering meets acupuncture - development of a miniaturized 48-channel skin impedance measurement system for needle and laser acupuncture

    Science.gov (United States)

    2010-01-01

    Background Due to controversially discussed results in scientific literature concerning changes of electrical skin impedance before and during acupuncture a new measurement system has been developed. Methods The prototype measures and analyzes the electrical skin impedance computer-based and simultaneously in 48 channels within a 2.5×3.5 cm matrix. Preliminary measurements in one person were performed using metal needle and violet laser (405 nm) acupuncture at the acupoint Kongzui (LU6). The new system is an improvement on devices previously developed by other researchers for this purpose. Results Skin impedance in the immediate surroundings of the acupoint was lowered reproducibly following needle stimulation and also violet laser stimulation. Conclusions A new instrumentation for skin impedance measurements is presented. The following hypotheses suggested by our results will have to be tested in further studies: Needle acupuncture causes significant, specific local changes of electrical skin impedance parameters. Optical stimulation (violet laser) at an acupoint causes direct electrical biosignal changes. PMID:21092296

  8. A systematic review of calcium channel antagonists in bipolar disorder and some considerations for their future development

    Science.gov (United States)

    Cipriani, A; Saunders, K; Attenburrow, M-J; Stefaniak, J; Panchal, P; Stockton, S; Lane, T A; Tunbridge, E M; Geddes, J R; Harrison, P J

    2016-01-01

    l-type calcium channel (LTCC) antagonists have been used in bipolar disorder for over 30 years, without becoming an established therapeutic approach. Interest in this class of drugs has been rekindled by the discovery that LTCC genes are part of the genetic aetiology of bipolar disorder and related phenotypes. We have therefore conducted a systematic review of LTCC antagonists in the treatment and prophylaxis of bipolar disorder. We identified 23 eligible studies, with six randomised, double-blind, controlled clinical trials, all of which investigated verapamil in acute mania, and finding no evidence that it is effective. Data for other LTCC antagonists (diltiazem, nimodipine, nifedipine, methyoxyverapamil and isradipine) and for other phases of the illness are limited to observational studies, and therefore no robust conclusions can be drawn. Given the increasingly strong evidence for calcium signalling dysfunction in bipolar disorder, the therapeutic candidacy of this class of drugs has become stronger, and hence we also discuss issues relevant to their future development and evaluation. In particular, we consider how genetic, molecular and pharmacological data can be used to improve the selectivity, efficacy and tolerability of LTCC antagonists. We suggest that a renewed focus on LTCCs as targets, and the development of ‘brain-selective' LTCC ligands, could be one fruitful approach to innovative pharmacotherapy for bipolar disorder and related phenotypes. PMID:27240535

  9. K(v)7 channels: function, pharmacology and channel modulators.

    Science.gov (United States)

    Dalby-Brown, William; Hansen, Henrik H; Korsgaard, Mads P G; Mirza, Naheed; Olesen, Søren-P

    2006-01-01

    K(v)7 channels are unique among K(+) channels, since four out of the five channel subtypes have well-documented roles in the development of human diseases. They have distinct physiological functions in the heart and in the nervous system, which can be ascribed to their voltage-gating properties. The K(v)7 channels also lend themselves to pharmacological modulation, and synthetic openers as well as blockers of the channels, regulating neuronal excitability, have existed even before the K(v)7 channels were identified by cloning. In the present review we give an account on the focused efforts to develop selective modulators, openers as well as blockers, of the K(v)7 channel subtypes, which have been undertaken during recent years, along with a discussion of the K(v)7 ion channel physiology and therapeutic indications for modulators of the neuronal K(v)7 channels.

  10. AFRRI Reports, Fourth Quarter 1992

    Science.gov (United States)

    1993-01-01

    Lysko. P. G,; Henneberry, R. C. Glu- 27. Holahan , E. V. Cellular radiation biology. In: Conklin, 3. J.; tamate becomes neurotoxic via the N-methyl-L...neurophysiotogical problem is the estimation of the duration of a channel opening, called the open dwell time~ In many experiments, however, the recorded...closed stale having an extremely low transition rate into other states is called an inactivated state. In addition, ion channels are (’orrespondenc’e

  11. Inertial Confinement Fusion quarterly report, January--March 1995. Volume 5, No. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The ICF quarterly report is published by the Inertial Confinement Fusion Program at the Lawrence Livermore National Laboratory. Topics included this quarter include: the role of the National Ignition Facility in the development of Inertial Confinement Fusion, laser-plasma interactions in large gas-filled hohlraums, evolution of solid-state induction modulators for a heavy-ion recirculator, the National Ignition Facility project, and terminal-level relaxation in Nd-doped laser material.

  12. Program status 3. quarter -- FY 1990: Confinement systems programs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-07-24

    Highlights of the DIII-D Research Operations task are: completed five weeks tokamak operations; initiated summer vent; achievement of 10.7% beta; carried out first dimensionless transport scaling experiment; completed IBW program; demonstrated divertor heat reduction with gas puffing; field task proposals presented to OFE; presentation of DIII-D program to FPAC; made presentation to Admiral Watkins; and SAN safety review. Summaries are given on research programs, operations, program development, hardware development, operations support and collaborative efforts. Brief summaries of progress on the International Cooperation task include: TORE SUPRA, ASDEX, JFT-2M, and JET. Funding for work on CIT physics was received this quarter. Several physics R and D planning tasks were initiated. Earlier in FY90, a poloidal field coil shaping system (PFC) was found for DIGNITOR. This quarter more detailed analysis has been done to optimize the design of the PFC system.

  13. Levels of CaV1.2 L-Type Ca2+ Channels Peak in the First Two Weeks in Rat Hippocampus Whereas CaV1.3 Channels Steadily Increase through Development

    Directory of Open Access Journals (Sweden)

    Audra A. Kramer

    2012-01-01

    Full Text Available Influx of calcium through voltage-dependent channels regulates processes throughout the nervous system. Specifically, influx through L-type channels plays a variety of roles in early neuronal development and is commonly modulated by G-protein-coupled receptors such as GABAB receptors. Of the four isoforms of L-type channels, only CaV1.2 and CaV1.3 are predominately expressed in the nervous system. Both isoforms are inhibited by the same pharmacological agents, so it has been difficult to determine the role of specific isoforms in physiological processes. In the present study, Western blot analysis and confocal microscopy were utilized to study developmental expression levels and patterns of CaV1.2 and CaV1.3 in the CA1 region of rat hippocampus. Steady-state expression of CaV1.2 predominated during the early neonatal period decreasing by day 12. Steady-state expression of CaV1.3 was low at birth and gradually rose to adult levels by postnatal day 15. In immunohistochemical studies, antibodies against CaV1.2 and CaV1.3 demonstrated the highest intensity of labeling in the proximal dendrites at all ages studied (P1–72. Immunohistochemical studies on one-week-old hippocampi demonstrated significantly more colocalization of GABAB receptors with CaV1.2 than with CaV1.3, suggesting that modulation of L-type calcium current in early development is mediated through CaV1.2 channels.

  14. LFCM vitrification technology. Quarterly progress report, April-June 1985

    Energy Technology Data Exchange (ETDEWEB)

    Burkholder, H.C.; Jarrett, J.H.; Minor, J.E. (comps.)

    1986-01-01

    This report is compiled by the Nuclear Waste Treatment Program and the Hanford Waste Vitrification Program at Pacific Northwest Laboratory to document progress on liquid-fed ceramic melter (LFCM) vitrification technology. Progress in the following technical subject areas during the third quarter of FY 1985 is discussed: pretreatment systems, melting process chemistry and glass development, feed preparation and transfer systems, melter systems, canister filling and handling systems, off-gas systems, process/product modeling and control, and supporting studies.

  15. Micro-channel catalytic reactor integration in CAPER and research/development on highly tritiated water handling and processing

    Energy Technology Data Exchange (ETDEWEB)

    Demange, D.; Cristescu, I.; Fanghaenel, E.; Gramlich, N.; Le, T.L.; Michling, R.; Moosmann, H.; Simon, K.H.; Wagner, R.; Welte, S. [Karlsruhe Institute of Technology, Institute for Technical Physics, Tritium Laboratory Karlsruhe, Eggenstein-Leopoldshafen (Germany); Glugla, M.; Shu, W.M.; Willms, R.S. [ITER Organization, Saint-Paul-lez-Durance (France)

    2015-03-15

    The CAPER facility of the Tritium Laboratory Karlsruhe has demonstrated the technology for the tokamak exhaust processing. CAPER has been significantly upgraded to pursue research/development programs towards highly tritiated water (HTW) handling and processing. The preliminary tests using a metal oxide reactor producing HTW afterward de-tritiated with PERMCAT were successful. In a later stage, a micro-channel catalytic reactor was installed in view of long term research program on HTW. The integration of this new system in CAPER was carried out along with a careful safety analysis due to high risk associated with such experiments. First experiments using the μ-CCR were performed trouble free, and HTW up to 360 kCi/kg was produced at a rate of 0.5 g/h. Such HTW was collected into a platinum zeolite bed (2 g of HTW for 20 g of Pt-zeolite), and in-situ detritiation was performed via isotopic exchange with deuterium. These first experimental results with tritium confirmed the potential for the capture and exchange method to be used for HTW in ITER. (authors)

  16. Mixed Convective Fully Developed Flow in a Vertical Channel in the Presence of Thermal Radiation and Viscous Dissipation

    Directory of Open Access Journals (Sweden)

    Prasad K.V.

    2017-02-01

    Full Text Available The effect of thermal radiation and viscous dissipation on a combined free and forced convective flow in a vertical channel is investigated for a fully developed flow regime. Boussinesq and Roseseland approximations are considered in the modeling of the conduction radiation heat transfer with thermal boundary conditions (isothermal-thermal, isoflux-thermal, and isothermal-flux. The coupled nonlinear governing equations are also solved analytically using the Differential Transform Method (DTM and regular perturbation method (PM. The results are analyzed graphically for various governing parameters such as the mixed convection parameter, radiation parameter, Brinkman number and perturbation parameter for equal and different wall temperatures. It is found that the viscous dissipation enhances the flow reversal in the case of a downward flow while it counters the flow in the case of an upward flow. A comparison of the Differential Transform Method (DTM and regular perturbation method (PM methods shows the versatility of the Differential Transform Method (DTM. The skin friction and the wall temperature gradient are presented for different values of the physical parameters and the salient features are analyzed.

  17. Development of a single-photon-counting camera with use of a triple-stacked micro-channel plate.

    Science.gov (United States)

    Yasuda, Naruomi; Suzuki, Hitoshi; Katafuchi, Tetsuro

    2016-01-01

    At the quantum-mechanical level, all substances (not merely electromagnetic waves such as light and X-rays) exhibit wave–particle duality. Whereas students of radiation science can easily understand the wave nature of electromagnetic waves, the particle (photon) nature may elude them. Therefore, to assist students in understanding the wave–particle duality of electromagnetic waves, we have developed a photon-counting camera that captures single photons in two-dimensional images. As an image intensifier, this camera has a triple-stacked micro-channel plate (MCP) with an amplification factor of 10(6). The ultra-low light of a single photon entering the camera is first converted to an electron through the photoelectric effect on the photocathode. The electron is intensified by the triple-stacked MCP and then converted to a visible light distribution, which is measured by a high-sensitivity complementary metal oxide semiconductor image sensor. Because it detects individual photons, the photon-counting camera is expected to provide students with a complete understanding of the particle nature of electromagnetic waves. Moreover, it measures ultra-weak light that cannot be detected by ordinary low-sensitivity cameras. Therefore, it is suitable for experimental research on scintillator luminescence, biophoton detection, and similar topics.

  18. 20 CFR 404.1412 - Compensation quarters of coverage.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Compensation quarters of coverage. 404.1412... the Railroad Retirement Program § 404.1412 Compensation quarters of coverage. As used in this subpart, a compensation quarter of coverage is any quarter of coverage computed with respect to...

  19. Econometric Methods within Romanian Quarterly National Accounts

    Directory of Open Access Journals (Sweden)

    Livia Marineta Drăguşin

    2013-04-01

    Full Text Available The aim of the present paper is to synthesise the main econometric methods (including the mathematical and statistical ones used in the Romanian Quarterly National Accounts compilation, irrespectively of Quarterly Gross Domestic Product (QGDP. These methods are adapted for a fast manner to operatively provide information about the country macroeconomic evolution to interested users. In this context, the mathematical and econometric methods play an important role in obtaining quarterly accounts valued in current prices and in constant prices, in seasonal adjustments and flash estimates of QGDP.

  20. The role of L-type calcium channels in the development and expression of behavioral sensitization to ethanol.

    Science.gov (United States)

    Broadbent, Julie

    2013-10-11

    Behavioral sensitization is thought to play a significant role in drug addiction. L-type calcium channels have been implicated in sensitization to stimulant and opiate drugs but it is unclear if these channels also contribute to sensitization to ethanol. The effects of three L-type calcium channel blockers, nifedipine (1-7.5 mg/kg), diltiazem (12.5-50 mg/kg), and verapamil (12.5 and 25 mg/kg), on sensitization to ethanol (2 g/kg) were examined in DBA/2J mice. All three blockers reduced but did not prevent expression of sensitization. Only nifedipine blocked acquisition of sensitization. Nifedipine and verapamil decreased blood ethanol levels. The current findings suggest L-type calcium channels do not play a substantial role in sensitization to ethanol and that the neural mechanisms underlying sensitization to ethanol are distinct from those mediating sensitization to stimulants and opiates.

  1. Second Quarter Hanford Seismic Report for Fiscal Year 2000

    Energy Technology Data Exchange (ETDEWEB)

    DC Hartshorn; SP Reidel; AC Rohay

    2000-07-17

    Hanford Seismic Monitoring provides an uninterrupted collection of high-quality raw and processed seismic data from the Hanford Seismic Network (HSN) for the US Department of Energy and its contractors. Hanford Seismic Monitoring also locates and identifies sources of seismic activity and monitors changes in the historical pattern of seismic activity at the Hanford Site. The data are compiled, archived, and published for use by the Hanford Site for waste management, Natural Phenomena Hazards assessments, and engineering design and construction. In addition, the seismic monitoring organization works with the Hanford Site Emergency Services Organization to provide assistance in the event of a significant earthquake on the Hanford Site. The HSN and the Eastern Washington Regional Network (EWRN) consist of 42 individual sensor sites and 15 radio relay sites maintained by the Hanford Seismic Monitoring staff. The HSN uses 21 sites and the EWRN uses 36 sites; both networks share 16 sites. The networks have 46 combined data channels because Gable Butte and Frenchman Hills East are three-component sites. The reconfiguration of the telemetry and recording systems was completed during the first quarter. All leased telephone lines have been eliminated and radio telemetry is now used exclusively. For the HSN, there were 506 triggers on two parallel detection and recording systems during the second quarter of fiscal year (FY) 2000. Twenty-seven seismic events were located by the Hanford Seismic Network within the reporting region of 46--47{degree} N latitude and 119--120{degree} W longitude; 12 were earthquakes in the Columbia River Basalt Group, 2 were earthquakes in the pre-basalt sediments, 9 were earthquakes in the crystalline basement, and 5 were quarry blasts. Three earthquakes appear to be related to geologic structures, eleven earthquakes occurred in known swarm areas, and seven earthquakes were random occurrences. No earthquakes triggered the Hanford Strong Motion

  2. First quarter Hanford seismic report for fiscal year 2000

    Energy Technology Data Exchange (ETDEWEB)

    DC Hartshorn; SP Reidel; AC Rohay

    2000-02-23

    Hanford Seismic Monitoring provides an uninterrupted collection of high-quality raw and processed seismic data from the Hanford Seismic Network (HSN) for the US Department of Energy and its contractors. Hanford Seismic Monitoring also locates and identifies sources of seismic activity and monitors changes in the historical pattern of seismic activity at the Hanford Site. The data are compiled, archived, and published for use by the Hanford Site for waste management, Natural Phenomena Hazards assessments, and engineering design and construction. In addition, the seismic monitoring organization works with the Hanford Site Emergency Services Organization to provide assistance in the event of a significant earthquake on the Hanford Site. The HSN and the Eastern Washington Regional Network (EWRN) consist of 42 individual sensor sites and 15 radio relay sites maintained by the Hanford Seismic Monitoring staff. The HSN uses 21 sites and the EW uses 36 sites; both networks share 16 sites. The networks have 46 combined data channels because Gable Butte and Frenchman Hills East are three-component sites. The reconfiguration of the telemetry and recording systems was completed during the first quarter. All leased telephone lines have been eliminated and radio telemetry is now used exclusively. For the HSN, there were 311 triggers on two parallel detection and recording systems during the first quarter of fiscal year (FY) 2000. Twelve seismic events were located by the Hanford Seismic Network within the reporting region of 46--47{degree}N latitude and 119--120{degree}W longitude; 2 were earthquakes in the Columbia River Basalt Group, 3 were earthquakes in the pre-basalt sediments, 9 were earthquakes in the crystalline basement, and 1 was a quarry blast. Two earthquakes appear to be related to a major geologic structure, no earthquakes occurred in known swarm areas, and 9 earthquakes were random occurrences. No earthquakes triggered the Hanford Strong Motion Accelerometers

  3. Third Quarter Hanford Seismic Report for Fiscal Year 2000

    Energy Technology Data Exchange (ETDEWEB)

    DC Hartshorn; SP Reidel; AC Rohay

    2000-09-01

    Hanford Seismic Monitoring provides an uninterrupted collection of high-quality raw and processed seismic data from the Hanford Seismic Network (HSN) for the U.S. Department of Energy and its con-tractors. Hanford Seismic Monitoring also locates and identifies sources of seismic activity and monitors changes in the historical pattern of seismic activity at the Hanford Site. The data are compiled, archived, and published for use by the Hanford Site for waste management, Natural Phenomena Hazards assessments, and engineering design and construction. In addition, the seismic monitoring organization works with the Hanford Site Emergency Services Organization to provide assistance in the event of a significant earthquake on the Hanford Site. The HSN and the Eastern Washington Regional Network (E WRN) consist of 42 individual sensor sites and 15 radio relay sites maintained by the Hanford Seismic Monitoring staff. The HSN uses 21 sites and the EWRN uses 36 sites; both networks share 16 sites. The networks have 46 combined data channels because Gable Butte and Frenchman Hills East are three-component sites. The reconfiguration of the telemetry and recording systems was completed during the first quarter. All leased telephone lines have been eliminated and radio telemetry is now used exclusively. For the HSN, there were 818 triggers on two parallel detection and recording systems during the third quarter of fiscal year (FY) 2000. Thirteen seismic events were located by the Hanford Seismic Network within the reporting region of 46-47{degree} N latitude and 119-120{degree} W longitude; 7 were earthquakes in the Columbia River Basalt Group, 1 was an earthquake in the pre-basalt sediments, and 5 were earthquakes in the crystalline basement. Three earthquakes occurred in known swarm areas, and 10 earthquakes were random occurrences. No earthquakes triggered the Hanford Strong Motion Accelerometers during the third quarter of FY 2000.

  4. Synchronized network activity in developing rat hippocampus involves regional hyperpolarization-activated cyclic nucleotide-gated (HCN) channel function

    OpenAIRE

    Bender, Roland A.; Galindo, Rafael; Mameli, Manuel; Gonzalez-Vega, Rebeca; Valenzuela, C. Fernando; Tallie Z. Baram

    2005-01-01

    The principal form of synchronized network activity in neonatal hippocampus consists of low frequency ‘giant depolarizing potentials’ (GDPs). Whereas contribution of both GABA and glutamate to their generation has been demonstrated, full understanding of the mechanisms underlying these synchronized activity bursts remains incomplete. A contribution of the h-current, conducted by HCN channels, to GDPs has been a topic of substantial interest. Here we focus on HCN1, the prevalent HCN channel is...

  5. Development of two-channel prototype ITER vacuum ultraviolet spectrometer with back-illuminated charge-coupled device and microchannel plate detectors.

    Science.gov (United States)

    Seon, C R; Choi, S H; Cheon, M S; Pak, S; Lee, H G; Biel, W; Barnsley, R

    2010-10-01

    A vacuum ultraviolet (VUV) spectrometer of a five-channel spectral system is designed for ITER main plasma impurity measurement. To develop and verify the system design, a two-channel prototype system is fabricated with No. 3 (14.4-31.8 nm) and No. 4 (29.0-60.0 nm) among the five channels. The optical system consists of a collimating mirror to collect the light from source to slit, two holographic diffraction gratings with toroidal geometry, and two different electronic detectors. For the test of the prototype system, a hollow cathode lamp is used as a light source. To find the appropriate detector for ITER VUV system, two kinds of detectors of the back-illuminated charge-coupled device and the microchannel plate electron multiplier are tested, and their performance has been investigated.

  6. Lipid rafts, KCa/ClCa/Ca2+ channel complexes and EGFR signaling: Novel targets to reduce tumor development by lipids?

    Science.gov (United States)

    Guéguinou, Maxime; Gambade, Audrey; Félix, Romain; Chantôme, Aurélie; Fourbon, Yann; Bougnoux, Philippe; Weber, Günther; Potier-Cartereau, Marie; Vandier, Christophe

    2015-10-01

    Membrane lipid rafts are distinct plasma membrane nanodomains that are enriched with cholesterol, sphingolipids and gangliosides, with occasional presence of saturated fatty acids and phospholipids containing saturated acyl chains. It is well known that they organize receptors (such as Epithelial Growth Factor Receptor), ion channels and their downstream acting molecules to regulate intracellular signaling pathways. Among them are Ca2+ signaling pathways, which are modified in tumor cells and inhibited upon membrane raft disruption. In addition to protein components, lipids from rafts also contribute to the organization and function of Ca2+ signaling microdomains. This article aims to focus on the lipid raft KCa/ClCa/Ca2+ channel complexes that regulate Ca2+ and EGFR signaling in cancer cells, and discusses the potential modification of these complexes by lipids as a novel therapeutic approach in tumor development. This article is part of a Special Issue entitled: Membrane channels and transporters in cancers.

  7. Quarterly Fishery Surveys - Salton Sea [ds428

    Data.gov (United States)

    California Department of Resources — In the spring of 2003, California Department of Fish and Game (CDFG) personnel began quarterly sampling of Salton Sea fish at fourteen stations around the sea, as...

  8. Information Science Research Institute. Quarterly progress report

    Energy Technology Data Exchange (ETDEWEB)

    Nartker, T.A.

    1994-06-30

    This is a second quarter 1194 progress report on the UNLV Information Science Research Institute. Included is symposium activity; staff activity; document analysis program; text retrieval program; institute activity; and goals.

  9. Fetal calcium regulates branching morphogenesis in the developing human and mouse lung: involvement of voltage-gated calcium channels.

    Science.gov (United States)

    Brennan, Sarah C; Finney, Brenda A; Lazarou, Maria; Rosser, Anne E; Scherf, Caroline; Adriaensen, Dirk; Kemp, Paul J; Riccardi, Daniela

    2013-01-01

    Airway branching morphogenesis in utero is essential for optimal postnatal lung function. In the fetus, branching morphogenesis occurs during the pseudoglandular stage (weeks 9-17 of human gestation, embryonic days (E)11.5-16.5 in mouse) in a hypercalcaemic environment (~1.7 in the fetus vs. ~1.1-1.3 mM for an adult). Previously we have shown that fetal hypercalcemia exerts an inhibitory brake on branching morphogenesis via the calcium-sensing receptor. In addition, earlier studies have shown that nifedipine, a selective blocker of L-type voltage-gated Ca(2+) channels (VGCC), inhibits fetal lung growth, suggesting a role for VGCC in lung development. The aim of this work was to investigate the expression of VGCC in the pseudoglandular human and mouse lung, and their role in branching morphogenesis. Expression of L-type (CaV1.2 and CaV1.3), P/Q type (CaV2.1), N-type (CaV2.2), R-type (CaV2.3), and T-type (CaV3.2 and CaV3.3) VGCC was investigated in paraffin sections from week 9 human fetal lungs and E12.5 mouse embryos. Here we show, for the first time, that Cav1.2 and Cav1.3 are expressed in both the smooth muscle and epithelium of the developing human and mouse lung. Additionally, Cav2.3 was expressed in the lung epithelium of both species. Incubating E12.5 mouse lung rudiments in the presence of nifedipine doubled the amount of branching, an effect which was partly mimicked by the Cav2.3 inhibitor, SNX-482. Direct measurements of changes in epithelial cell membrane potential, using the voltage-sensitive fluorescent dye DiSBAC2(3), demonstrated that cyclic depolarisations occur within the developing epithelium and coincide with rhythmic occlusions of the lumen, driven by the naturally occurring airway peristalsis. We conclude that VGCC are expressed and functional in the fetal human and mouse lung, where they play a role in branching morphogenesis. Furthermore, rhythmic epithelial depolarisations evoked by airway peristalsis would allow for branching to match

  10. Channel Access in Erlang

    Energy Technology Data Exchange (ETDEWEB)

    Nicklaus, Dennis J. [Fermilab

    2013-10-13

    We have developed an Erlang language implementation of the Channel Access protocol. Included are low-level functions for encoding and decoding Channel Access protocol network packets as well as higher level functions for monitoring or setting EPICS process variables. This provides access to EPICS process variables for the Fermilab Acnet control system via our Erlang-based front-end architecture without having to interface to C/C++ programs and libraries. Erlang is a functional programming language originally developed for real-time telecommunications applications. Its network programming features and list management functions make it particularly well-suited for the task of managing multiple Channel Access circuits and PV monitors.

  11. Development of therapeutic antibodies to G protein-coupled receptors and ion channels: Opportunities, challenges and their therapeutic potential in respiratory diseases.

    Science.gov (United States)

    Douthwaite, Julie A; Finch, Donna K; Mustelin, Tomas; Wilkinson, Trevor C I

    2017-01-01

    The development of recombinant antibody therapeutics continues to be a significant area of growth in the pharmaceutical industry with almost 50 approved monoclonal antibodies on the market in the US and Europe. Therapeutic drug targets such as soluble cytokines, growth factors and single transmembrane spanning receptors have been successfully targeted by recombinant monoclonal antibodies and the development of new product candidates continues. Despite this growth, however, certain classes of important disease targets have remained intractable to therapeutic antibodies due to the complexity of the target molecules. These complex target molecules include G protein-coupled receptors and ion channels which represent a large target class for therapeutic intervention with monoclonal antibodies. Although these targets have typically been addressed by small molecule approaches, the exquisite specificity of antibodies provides a significant opportunity to provide selective modulation of these important regulators of cell function. Given this opportunity, a significant effort has been applied to address the challenges of targeting these complex molecules and a number of targets are linked to the pathophysiology of respiratory diseases. In this review, we provide a summary of the importance of GPCRs and ion channels involved in respiratory disease and discuss advantages offered by antibodies as therapeutics at these targets. We highlight some recent GPCRs and ion channels linked to respiratory disease mechanisms and describe in detail recent progress made in the strategies for discovery of functional antibodies against challenging membrane protein targets such as GPCRs and ion channels.

  12. Charter for the development of the super-ethanol E85 channel in France; Charte pour le developpement de la filiere superethanol E85 en France

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Signed by more than 25 associations, or enterprises and the Government, this charter underlines eight main points in favor of the super-ethanol E85 development. Then the charter defines the actions plan allowing to assure the success of the launching and the development of the super-ethanol E85 channel: the necessary standards and technic, the diversified and impressive offer of flex-fuel vehicles, the E85 distribution network on the territory, the development of a competitive and sustainable channel of ethanol production, the economic and fiscal conditions allowing the E85 to be competitive facing the fossil fuels and the following of the actions plan. (A.L.B.)

  13. Development of TUF-ELOCA - a software tool for integrated single-channel thermal-hydraulic and fuel element analyses

    Energy Technology Data Exchange (ETDEWEB)

    Popescu, A.I.; Wu, E.; Yousef, W.W.; Pascoe, J. [Nuclear Safety Solutions Ltd., Toronto, Ontario (Canada); Parlatan, Y. [Ontario Power Generation, Toronto, Ontario (Canada); Kwee, M. [Bruce Power, Tiverton, Ontario (Canada)

    2006-07-01

    The TUF-ELOCA tool couples the TUF and ELOCA codes to enable an integrated thermal-hydraulic and fuel element analysis for a single channel during transient conditions. The coupled architecture is based on TUF as the parent process controlling multiple ELOCA executions that simulate the fuel elements behaviour and is scalable to different fuel channel designs. The coupling ensures a proper feedback between the coolant conditions and fuel elements response, eliminates model duplications, and constitutes an improvement from the prediction accuracy point of view. The communication interfaces are based on PVM and allow parallelization of the fuel element simulations. Developmental testing results are presented showing realistic predictions for the fuel channel behaviour during a transient. (author)

  14. Array Automated Assembly, Phase 2. Quarterly report for the quarter ending June 30, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, W.E.; Kimberly, W.; Mardesich, N.; Pepe, A.

    1978-08-01

    The Automated Array Assembly Task is a process development task. The overall goal is to advance solar cell and module process technology to meet the 1986 goal of a production capacity of 500 megawatts per year at a cost of less than $500 per kilowatt. Work performed during the quarter ending June 30, 1978 is covered. Discussions are included on diffusion masking dielectric evaluation, P/sup +/ back surface fields formed by firing screen printed aluminum back contacts, screen printable glass systems for use as isolation dielectrics, screen printed front contact metallization and stresses caused by thermal cycling silicon solar cells adhesively bonded to glass superstrates. SEM pictures of the fritted layer at the interface between the front metallization and silicon are presented. Results of an x-ray topographic examination of the silicon under and adjacent to printed and fired patterns of fritted conductor and dielectric pastes are given.

  15. Idaho National Laboratory Quarterly Occurrence Analysis - 1st Quarter FY 2016

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth Ann [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 74 reportable events (16 from the 1st Qtr FY-16 and 58 from the prior three reporting quarters), as well as 35 other issue reports (including events found to be not reportable and Significant Category A and B conditions) identified at INL during the past 12 months (15 from this quarter and 20 from the prior three quarters).

  16. Development and Testing of an In Vitro Assay for Screening of Potential Therapeutic Agents against Na Channel Neurotoxins

    Science.gov (United States)

    1987-02-03

    related effects of pyrethroid insecticides on the laterao line sense organ and on peripheral nerves of the clawed frog, Xenopus laevis. Pestic ...Pyrethroid insecticides: Potent stereospecific enhancers of mouse brain sodium channel activation. Pestic . Biochem. Biophys. 24: 200-206 (1985). 26

  17. Agricultural Opinion Leader Communication Channel Preferences: An Empirical Analysis of Participants of Agricultural and Natural Resource Leadership Development Programs

    Science.gov (United States)

    Lamm, Kevan W.; Rumble, Joy N.; Carter, Hannah S.; Lamm, Alexa J.

    2016-01-01

    In the information rich society of the 21st century consumers have had access to many different communication channels where they can find information about agricultural topics. Individuals seek information that fulfills their needs and opinion leaders have been identified as a solution to communicating with audiences about complex topics.…

  18. CONSIDERATIONS FOR THE DEVELOPMENT OF A DEVICE FOR THE DECOMMISSIONING OF THE HORIZONTAL FUEL CHANNELS IN THE CANDU 6 NUCLEAR REACTOR PART 4 - FUEL CHANNEL ASSEMBLY

    Directory of Open Access Journals (Sweden)

    Gabi ROSCA FARTAT

    2014-05-01

    Full Text Available As many nuclear power plants are reaching their end of lifecycle, the decommissioning of these installations has become one of the 21st century’s great challenges. Each project may be managed differently, depending on the country, development policies, financial considerations, and the availability of qualified engineers or specialized companies to handle such projects. The principle objective of decommissioning is to place a facility into such a condition that there is no unacceptable risk from the decommissioned facility to public health and safety of the environment. In order to ensure that at the end of its life the risk from a facility is within acceptable bounds, action is normally required. The overall decommissioning strategy is to deliver a timely, costeffective program while maintaining high standards of safety, security and environmental protection. If facilities were not decommissioned, they could degrade and potentially present an environmental radiological hazard in the future. Simply abandoning or leaving a facility after ceasing operations is not considered to be an acceptable alternative to decommissioning. The final aim of decommissioning is to recover the geographic site to its original condition.

  19. CONSIDERATIONS FOR THE DEVELOPMENT OF A DEVICE FOR THE DECOMMISSIONING OF THE HORIZONTAL FUEL CHANNELS IN THE CANDU 6 NUCLEAR REACTOR PART 3 - FUEL CHANNEL REFERENCES

    Directory of Open Access Journals (Sweden)

    Gabi ROSCA FARTAT

    2014-05-01

    Full Text Available As many nuclear power plants are reaching their end of lifecycle, the decommissioning of these installations has become one of the 21st century’s great challenges. Each project may be managed differently, depending on the country, development policies, financial considerations, and the availability of qualified engineers or specialized companies to handle such projects. The principle objective of decommissioning is to place a facility into such a condition that there is no unacceptable risk from the decommissioned facility to public health and safety of the environment. In order to ensure that at the end of its life the risk from a facility is within acceptable bounds, action is normally required. The overall decommissioning strategy is to deliver a timely, cost-effective program while maintaining high standards of safety, security and environmental protection. If facilities were not decommissioned, they could degrade and potentially present an environmental radiological hazard in the future. Simply abandoning or leaving a facility after ceasing operations is not considered to be an acceptable alternative to decommissioning. The final aim of decommissioning is to recover the geographic site to its original condition.

  20. CONSIDERATIONS FOR THE DEVELOPMENT OF A DEVICE FOR THE DECOMMISSIONING OF THE HORIZONTAL FUEL CHANNELS IN THE CANDU 6 NUCLEAR REACTOR PART 2 - FUEL CHANNEL PRESENTATION

    Directory of Open Access Journals (Sweden)

    Gabi ROSCA FARTAT

    2014-05-01

    Full Text Available As many nuclear power plants are reaching their end of lifecycle, the decommissioning of these installations has become one of the 21st century’s great challenges. Each project may be managed differently, depending on the country, development policies, financial considerations, and the availability of qualified engineers or specialized companies to handle such projects. The principle objective of decommissioning is to place a facility into such a condition that there is no unacceptable risk from the decommissioned facility to public health and safety of the environment. In order to ensure that at the end of its life the risk from a facility is within acceptable bounds, action is normally required. The overall decommissioning strategy is to deliver a timely, costeffective program while maintaining high standards of safety, security and environmental protection. If facilities were not decommissioned, they could degrade and potentially present an environmental radiological hazard in the future. Simply abandoning or leaving a facility after ceasing operations is not considered to be an acceptable alternative to decommissioning.The final aim of decommissioning is to recover the geographic site to its original condition.

  1. Dip-coating process. Silicon sheet growth development for the large-area silicon sheet task of the low-cost silicon solar array project. Quarterly report No. 7

    Energy Technology Data Exchange (ETDEWEB)

    Zook, J.D.; Heaps, J.D.; Maciolek, R.B.; Koepke, B.; Butter, C.D.; Schuldt, S.B.

    1977-12-30

    The objective of this research program is to investigate the technical and economic feasibility of producing solar-cell-quality sheet silicon by coating one surface of carbonized ceramic substrates with a thin layer of large-grain polycrystalline silicon from the melt. During the past quarter, significant progress was demonstrated in several areas. Seeded growth of silicon-on-ceramic (SOC) with an EFG ribbon seed was demonstrated. Different types of mullite received from Coors were successfully coated with silicon. A new method of deriving minority carrier diffusion length, L/sub n/, from spectral response measurements was evaluated. ECOMOD cost projections were found to be in good agreement with the interim SAMIS method proposed by JPL. On the less positive side, there was a decrease in cell performance which is believed to be due to an unidentified source of impurities. Also, operation of the new coating system fell behind schedule but is expected to improve in the coming quarter, since construction has now been completed.

  2. Alpha Channel Key Technology Analysis in Media Work Development%媒体作品开发中的Alpha通道关键技术分析

    Institute of Scientific and Technical Information of China (English)

    李芙蓉

    2011-01-01

    In the multimedia development process works,Alpha-channel technology is the mOst critical image processing technology.The Alpha channel involves the application of a number of multimedia development software,and therefore knows the technology has some difficulty making the multimedia features and performance of the work force to some extent limited.This paper describes the Alpha channel in the popular multimedia development software in specific application methods.%在多媒体作品的开发过程中,Alpha通道技术是最关键的图像处理技术。而Alpha通道的应用涉及到了多个多媒体开发软件,因而掌握此项技术有一定的难度,使得多媒体作品的功能和表现力在一定程度上受到了限制。本文主要介绍了Alpha通道在常用的多媒体开发软件中的具体的应用方法。

  3. Mechanosensitive Channels

    Science.gov (United States)

    Martinac, Boris

    Living cells are exposed to a variety of mechanical stimuli acting throughout the biosphere. The range of the stimuli extends from thermal molecular agitation to potentially destructive cell swelling caused by osmotic pressure gradients. Cellular membranes present a major target for these stimuli. To detect mechanical forces acting upon them cell membranes are equipped with mechanosensitive (MS) ion channels. Functioning as molecular mechanoelectrical transducers of mechanical forces into electrical and/or chemical intracellular signals these channels play a critical role in the physiology of mechanotransduction. Studies of prokaryotic MS channels and recent work on MS channels of eukaryotes have significantly increased our understanding of their gating mechanism, physiological functions, and evolutionary origins as well as their role in the pathology of disease.

  4. The study and development of the empirical correlations equation of natural convection heat transfer on vertical rectangular sub-channels

    Science.gov (United States)

    Kamajaya, Ketut; Umar, Efrizon; Sudjatmi, K. S.

    2012-06-01

    This study focused on natural convection heat transfer using a vertical rectangular sub-channel and water as the coolant fluid. To conduct this study has been made pipe heaters are equipped with thermocouples. Each heater is equipped with five thermocouples along the heating pipes. The diameter of each heater is 2.54 cm and 45 cm in length. The distance between the central heating and the pitch is 29.5 cm. Test equipment is equipped with a primary cooling system, a secondary cooling system and a heat exchanger. The purpose of this study is to obtain new empirical correlations equations of the vertical rectangular sub-channel, especially for the natural convection heat transfer within a bundle of vertical cylinders rectangular arrangement sub-channels. The empirical correlation equation can support the thermo-hydraulic analysis of research nuclear reactors that utilize cylindrical fuel rods, and also can be used in designing of baffle-free vertical shell and tube heat exchangers. The results of this study that the empirical correlation equations of natural convection heat transfer coefficients with rectangular arrangement is Nu = 6.3357 (Ra.Dh/x)0.0740.

  5. ER Consolidated Quarterly Report October 2014

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, John R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-10-01

    This Environmental Restoration Operations (ER) Consolidated Quarterly Report (ER Quarterly Report) provides the status of ongoing corrective actions and related Long- Term Stewardship (LTS) activities being implemented by Sandia National Laboratories, New Mexico (SNL/NM) ER for the April, May, and June 2014 quarterly reporting period. Section 2.0 provides the status of ER Operations activities including closure activities for the Mixed Waste Landfill (MWL), project management and site closure, and hydrogeologic characterizations. Section 3.0 provides the status of LTS activities that relate to the Chemical Waste Landfill (CWL) and the associated Corrective Action Management Unit (CAMU). Section 4.0 provides the references noted in Section I of this report.

  6. Idaho National Laboratory Quarterly Performance Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-11-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 60 reportable events (23 from the 4th Qtr FY14 and 37 from the prior three reporting quarters) as well as 58 other issue reports (including not reportable events and Significant Category A and B conditions) identified at INL from July 2013 through October 2014. Battelle Energy Alliance (BEA) operates the INL under contract DE AC07 051D14517.

  7. Quarterly report for the electricity market. 1. quarter of 2012; Kvartalsrapport for kraftmarknaden. 1. kvartal 2012

    Energy Technology Data Exchange (ETDEWEB)

    Pettersen, Finn Erik Ljaastad; Eliston, Anton Jaynanand; Guren, Ingri; Homqvist, Erik; Lund, Per Tore Jensen; Magnussen, Ingrid; Rasmussen, Kristian; Ulriksen, Margit Iren

    2012-07-01

    The first quarter of 2012 was unusually mild and wetter than normal. Total inflow was 16.8 TWh, 7.5 TWh more than normal. This ensured a high reservoir levels and at the end of the quarter the filling was 50.5 percent. It is 12.5 percentage points over the normal for the time of year and 32.4 percentage points higher than the same time last year. Norway had a power consumption of 37.5 TWh in the first quarter, which is 2.3 percent less than in the same quarter last year. the past 12 months, consumption has been 124.2 TWh, compared with 129.7 TWh the preceding 12 months. Power production in Norway was 42.3 TWh in the first quarter - an increase of 32.3 percent compared with the same quarter last year. The last 12 months have the Norwegian production been 138.5 TWh compared to 117.7 TWh the the previous 12 months. The production increase is due to milder and wetter weather than normal over the past year. This involvement also high the exports abroad. In the first quarter, Norway had a net export of 4.8 TWh, compared with a net import of 6.4 TWh in the first quarter last year. The good resource, combined with a low consumption gave a low price level in wholesale market for electricity. On average for the fourth quarter was the average spot price in the South and West Norway, Nok 272 and 275 / MWh. In Eastern Norway, the average price of Nok 283 / MWh, while it was Nok 285 / MWh in the Middle and Northern Norway. (Author)

  8. Quarterly report for the electricity market. 2. quarter of 2012; Kvartalsrapport for kraftmarknaden. 2. kvartal 2012

    Energy Technology Data Exchange (ETDEWEB)

    Pettersen, Finn Erik Ljaastad; Eliston, Anton Jayanand; Vaeringstad, Thomas; Lund, Per Tore Jensen; Magnussen, Ingrid; Langseth, Benedicte; Willumsen, Mats Oeivind; Rasmussen, Kristian; Guren, Ingri

    2012-07-01

    Second quarter of 2012 was cold. Total inflow was 47.0 TWh, 8.8 TWh less than normal. At the end of the quarter, the reservoir level 68.4 percent. It is 1.8 percentage points above normal for time of year and 1.2 percentage points higher than the same time last year. Norway had a power consumption of 28.2 TWh in the second quarter, which is 4.2 percent higher than in the same quarter last year. The last 12 months the consumption have been 125.7 TWh, compared with 128.7 TWh the preceding 12 months. The power production in Norway was 33.3 TWh in the second quarter - an increase of 26.1 percent compared with the same quarter last year. The last 12 months the Norwegian production has been 145.8 TWh, compared with 120.9 TWh the preceding 12 months. The production increase is due to that the last year has been much wetter than the preceding. This has also given high export abroad. In the second quarter Norway had a net export of 5.1 TWh, compared with a net import of 0.6 TWh in the second quarter last year. The good resource gave a low price level in the wholesale market for electricity. On average for the second quarter was the average spot price in West, Southwest and Eastern Norway, 201, 202 and 203 Nok / MWh. In Central and Northern Norway, the average price 218 and 213 Nok/ MWh. (eb)

  9. ARM Operations Quarterly Report October 1-December 31, 2013

    Energy Technology Data Exchange (ETDEWEB)

    Voyles, Jimmy W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-12-31

    The U.S. Department of Energy requires national user facilities to report time-based operating data. This quarterly report is written to comply with this requirement. This reports on the first quarter facility statistics.

  10. Development of speckle-free channel-cut crystal optics using plasma chemical vaporization machining for coherent x-ray applications.

    Science.gov (United States)

    Hirano, Takashi; Osaka, Taito; Sano, Yasuhisa; Inubushi, Yuichi; Matsuyama, Satoshi; Tono, Kensuke; Ishikawa, Tetsuya; Yabashi, Makina; Yamauchi, Kazuto

    2016-06-01

    We have developed a method of fabricating speckle-free channel-cut crystal optics with plasma chemical vaporization machining, an etching method using atmospheric-pressure plasma, for coherent X-ray applications. We investigated the etching characteristics to silicon crystals and achieved a small surface roughness of less than 1 nm rms at a removal depth of >10 μm, which satisfies the requirements for eliminating subsurface damage while suppressing diffuse scattering from rough surfaces. We applied this method for fabricating channel-cut Si(220) crystals for a hard X-ray split-and-delay optical system and confirmed that the crystals provided speckle-free reflection profiles under coherent X-ray illumination.

  11. Development and application of a multi-channel monitoring system for near real-time VOC measurement in a hazardous waste management facility.

    Science.gov (United States)

    Je, Chung-hwan; Stone, Richard; Oberg, Steven G

    2007-09-01

    This paper describes the development and application of a multi-channel monitoring system for recording, processing, and analyzing volatile organic compound (VOC) levels discharged to the atmosphere from a walk-in hood in a hazardous waste management facility. The monitoring system consists of an array of PID (photo ionization detector) sensors and a networked control program that provides operational schematic diagram, performs data analyses, and illustrates real-time graphical displays. Furthermore, the system records potential worker exposures, exhaust filtration efficiency and environmental release levels. Multi-channel continuous monitoring of VOCs is successfully implemented during chemical bulking operations. It is shown that a real-time monitoring system is effective for early warning detection of hazardous chemicals and for predicting the performance of adsorption filters used for VOC removal. In addition, a connected local weather visualization system supports efforts to minimize potential health and environmental impacts of VOC emissions to surrounding areas.

  12. Development of speckle-free channel-cut crystal optics using plasma chemical vaporization machining for coherent x-ray applications

    Science.gov (United States)

    Hirano, Takashi; Osaka, Taito; Sano, Yasuhisa; Inubushi, Yuichi; Matsuyama, Satoshi; Tono, Kensuke; Ishikawa, Tetsuya; Yabashi, Makina; Yamauchi, Kazuto

    2016-06-01

    We have developed a method of fabricating speckle-free channel-cut crystal optics with plasma chemical vaporization machining, an etching method using atmospheric-pressure plasma, for coherent X-ray applications. We investigated the etching characteristics to silicon crystals and achieved a small surface roughness of less than 1 nm rms at a removal depth of >10 μm, which satisfies the requirements for eliminating subsurface damage while suppressing diffuse scattering from rough surfaces. We applied this method for fabricating channel-cut Si(220) crystals for a hard X-ray split-and-delay optical system and confirmed that the crystals provided speckle-free reflection profiles under coherent X-ray illumination.

  13. Chloride channels in stroke

    Institute of Scientific and Technical Information of China (English)

    Ya-ping ZHANG; Hao ZHANG; Dayue Darrel DUAN

    2013-01-01

    Vascular remodeling of cerebral arterioles,including proliferation,migration,and apoptosis of vascular smooth muscle cells (VSMCs),is the major cause of changes in the cross-sectional area and diameter of the arteries and sudden interruption of blood flow or hemorrhage in the brain,ie,stroke.Accumulating evidence strongly supports an important role for chloride (Clˉ) channels in vascular remodeling and stroke.At least three Clˉ channel genes are expressed in VSMCs:1) the TMEM16A (or Ano1),which may encode the calcium-activated Clˉ channels (CACCs); 2) the CLC-3 Clˉ channel and Clˉ/H+ antiporter,which is closely related to the volume-regulated Clˉ channels (VRCCs); and 3) the cystic fibrosis transmembrane conductance regulator (CFTR),which encodes the PKA-and PKC-activated Clˉ channels.Activation of the CACCs by agonist-induced increase in intracellular Ca2+ causes membrane depolarization,vasoconstriction,and inhibition of VSMC proliferation.Activation of VRCCs by cell volume increase or membrane stretch promotes the production of reactive oxygen species,induces proliferation and inhibits apoptosis of VSMCs.Activation of CFTR inhibits oxidative stress and may prevent the development of hypertension.In addition,Clˉ current mediated by gammaaminobutyric acid (GABA) receptor has also been implicated a role in ischemic neuron death.This review focuses on the functional roles of Clˉ channels in the development of stroke and provides a perspective on the future directions for research and the potential to develop Clˉ channels as new targets for the prevention and treatment of stroke.

  14. Sinopec's Profits up Drastically in First Quarter

    Institute of Scientific and Technical Information of China (English)

    Wang Yuxiao

    2003-01-01

    @@ Sinopec, Asia's largest refiner,announced on April 29 that its net first quarter profit skyrocketed almost 12-fold as it sold more refined oil and petrochemical products, cashing in on the international price hikes in oil during the period. However, analysts said the growth of China's second largest oil company is expected to recede in the second quarter as oil prices fall due to the end of the Iraq War. They still anticipate the company's full-year profit will increase by 15 percent or more on the back of a domestic oil market recovery.

  15. Development of a 144-channel Hybrid Avalanche Photo-Detector for Belle II ring-imaging Cherenkov counter with an aerogel radiator

    Energy Technology Data Exchange (ETDEWEB)

    Nishida, S., E-mail: shohei.nishida@kek.jp [High Energy Accelerator Research Organization (KEK), Tsukuba (Japan); Adachi, I. [High Energy Accelerator Research Organization (KEK), Tsukuba (Japan); Hamada, N. [Toho University, Funabashi (Japan); Hara, K. [High Energy Accelerator Research Organization (KEK), Tsukuba (Japan); Iijima, T. [Nagoya University, Nagoya (Japan); Iwata, S.; Kakuno, H. [Tokyo Metropolitan University, Hachioji (Japan); Kawai, H. [Chiba University, Chiba (Japan); Korpar, S.; Krizan, P. [Jozef Stefan Institute, Ljubljana (Slovenia); Ogawa, S. [Toho University, Funabashi (Japan); Pestotnik, R.; Ŝantelj, L.; Seljak, A. [Jozef Stefan Institute, Ljubljana (Slovenia); Sumiyoshi, T. [Tokyo Metropolitan University, Hachioji (Japan); Tabata, M. [Chiba University, Chiba (Japan); Tahirovic, E. [Jozef Stefan Institute, Ljubljana (Slovenia); Yoshida, K. [Tokyo Metropolitan University, Hachioji (Japan); Yusa, Y. [Niigata University, Niigata (Japan)

    2015-07-01

    The Belle II detector, a follow up of the very successful Belle experiment, is under construction at the SuperKEKB electron–positron collider at KEK in Japan. For the PID system in the forward region of the spectrometer, a proximity-focusing ring-imaging Cherenkov counter with an aerogel radiator is being developed. For the position sensitive photon sensor, a 144-channel Hybrid Avalanche Photo-Detector has been developed with Hamamatsu Photonics K.K. In this report, we describe the specification of the Hybrid Avalanche Photo-Detector and the status of the mass production.

  16. Authentication over Noisy Channels

    CERN Document Server

    Lai, Lifeng; Poor, H Vincent

    2008-01-01

    In this work, message authentication over noisy channels is studied. The model developed in this paper is the authentication theory counterpart of Wyner's wiretap channel model. Two types of opponent attacks, namely impersonation attacks and substitution attacks, are investigated for both single message and multiple message authentication scenarios. For each scenario, information theoretic lower and upper bounds on the opponent's success probability are derived. Remarkably, in both scenarios, lower and upper bounds are shown to match, and hence the fundamental limit of message authentication over noisy channels is fully characterized. The opponent's success probability is further shown to be smaller than that derived in the classic authentication model in which the channel is assumed to be noiseless. These results rely on a proposed novel authentication scheme in which key information is used to provide simultaneous protection again both types of attacks.

  17. Volume Regulated Channels

    DEFF Research Database (Denmark)

    Klausen, Thomas Kjær

    - serves a multitude of functions in the mammalian cell, regulating the membrane potential (Em), cell volume, protein activity and the driving force for facilitated transporters giving Cl- and Cl- channels a major potential of regulating cellular function. These functions include control of the cell cycle...... of volume perturbations evolution have developed system of channels and transporters to tightly control volume homeostasis. In the past decades evidence has been mounting, that the importance of these volume regulated channels and transporters are not restricted to the defense of cellular volume......, controlled cell death and cellular migration. Volume regulatory mechanisms has long been in focus for regulating cellular proliferation and my thesis work have been focusing on the role of Cl- channels in proliferation with specific emphasis on ICl, swell. Pharmacological blockage of the ubiquitously...

  18. 10 CFR 34.69 - Records of quarterly inventory.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Records of quarterly inventory. 34.69 Section 34.69 Energy... INDUSTRIAL RADIOGRAPHIC OPERATIONS Recordkeeping Requirements § 34.69 Records of quarterly inventory. (a) Each licensee shall maintain records of the quarterly inventory of sealed sources and of...

  19. Natural gas imports and exports. Second quarter report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The Office of Natural Gas and Petroleum Import and Export Activities prepares quarterly reports summarizing the data provided by companies authorized to import or export natural gas. Companies are required, as a condition of their authorizations, to file quarterly reports. This report is for the second quarter of 1997 (April through June).

  20. 19 CFR 159.34 - Certified quarterly rate.

    Science.gov (United States)

    2010-04-01

    ... TREASURY (CONTINUED) LIQUIDATION OF DUTIES Conversion of Foreign Currency § 159.34 Certified quarterly rate. (a) Countries for which quarterly rate is certified. For the currency of each of the following... York for such foreign currency for a day in that quarter: Australia, Austria, Belgium, Brazil,...

  1. 12 CFR 620.10 - Preparing the quarterly report.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Preparing the quarterly report. 620.10 Section 620.10 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM DISCLOSURE TO SHAREHOLDERS Quarterly Report § 620.10 Preparing the quarterly report. (a) Each institution of the Farm Credit...

  2. Coal combustion science. Quarterly progress report, July--September 1994

    Energy Technology Data Exchange (ETDEWEB)

    Hardesty, D.R. [ed.; Baxter, L.L.; Davis, K.A.; Hurt, R.H.; Yang, N.Y.C.

    1995-09-01

    This document is a quarterly status report of the Coal Combustion Science Project that is being conducted at the Combustion Research Facility, Sandia National Laboratories, Livermore, California. The information reported is for the period July-September 1994. The objective of this work is to support the Office of Fossil Energy in executing research on coal combustion science. This project consists of basic research on coal combustion that supports both the Pittsburgh Energy Technology Center (PETC) Direct Utilization Advanced Research and Technology Development Program, and the International Energy Agency (IEA) Coal Combustion Science Project.

  3. The AMTEX Partnership{trademark}. Fourth quarter report, September 1994

    Energy Technology Data Exchange (ETDEWEB)

    Lemon, D.K.; Quisenberry, R.K.

    1994-06-01

    The AMTEX Partnership{trademark} is a collaborative research and development program among the US Integrated Textile Industry, the Department of Energy (DOE), the DOE laboratories, other federal agencies and laboratories, and universities. The goal of AMTEX is to strengthen the competitiveness of this vital industry, thereby preserving and creating US jobs. The operational and program management of the AMTEX Partnership is provided by the Program Office. This report is produced by the Program Office on a quarterly basis and provides information on the progress, operations, and project management of the partnership.

  4. The AMTEX Partnership. Second quarter report, Fiscal Year 1995

    Energy Technology Data Exchange (ETDEWEB)

    Lemon, D.K.; Quisenberry, R.K. [AMTEX Partnership (United States)

    1995-03-01

    The AMTEX Partnership{trademark} is a collaborative research and development program among the US Integrated Textile Industry, the Department of Energy (DOE), the national laboratories, other federal agencies and laboratories, and universities. The goal of AMTEX is to strengthen the competitiveness of this vital industry, thereby reserving and creating US jobs. The operations and program management of the AMTEX Partnership is provided by the Program Office. This report is produced by the Program Office on a quarterly basis and provides information on the progress, operations, and project management of the partnership.

  5. The AMTEX Partnership. Third quarterly report, FY 1995

    Energy Technology Data Exchange (ETDEWEB)

    Lemon, D.K.; Quisenberry, R.K. [AMTEX Partnership (United States)

    1995-06-01

    Key activities for the quarter were the initiation of tactical work on the OPCon Project, development of a draft of the AMTEX Policies and Procedures document, and a meeting of the Industry Technical Advisory Committee. A significant milestone was reached when a memorandum of understanding was signed between the DOE and The Department of Commerce. The agreement signified the official participation of the National Institute of Standards and Technology on the Demand Activated Manufacturing Architecture (DAMA) project in AMTEX. Project accomplishments are given for: computer-aided manufacturing, cotton biotechnology, DAMA, electronic embedded fingerprints, rapid cutting, sensors for agile manufacturing, and textile resource conservation.

  6. Effects of Game Location, Quality of Opposition, and Starting Quarter Score in the Outcome of Elite Water Polo Quarters.

    Science.gov (United States)

    Ruano, Miguel Á; Serna, Ana D; Lupo, Corrado; Sampaio, Jaime E

    2016-04-01

    The notational analysis is used to investigate teams' performance in water polo, especially focused on the determinants of success. Recently, a new topic has emerged "the situational variables," which includes the game conditions that may influence the performance at a behavioral level. The aim of this study was to identify the interactive effects of starting quarter score (SQS) (i.e., score difference at the beginning of each quarter and at the final score) and game location (GL) (i.e., home and away teams) in relation to quality of opposition (i.e., positions of difference between opposing teams at the end-of-season rankings) in elite men's water polo games. Data comprised 528 games (n = 2,112 quarters) from the first Spanish water polo division. A linear regression analysis was applied to show the impact of SQS and GL in relation to quality of opposition (unbalanced and balanced) for quarter (all quarters, and second, third, and fourth quarters). Results showed that SQS has an important effect for all quarters (0.16) and for the second (0.14) and third (0.14) quarters in balanced games (whereas the fourth quarter has an unpredictable outcome), and for each quarter (all quarters: 0.33; second quarter: 0.55; third quarter: 0.44; fourth quarter: 0.26) in unbalanced games. In addition, GL effects emerged for balanced (0.31) and unbalanced (0.45) games for all quarters and specifically for the second quarter of the unbalanced games. Therefore, this study showed that the elite water polo game dynamics, indirectly providing a reference for coaches (i.e., effective tactical approach) and physical trainers (i.e., high performance intensities), plans to improve their players' performance.

  7. VSRR - Quarterly provisional estimates for selected birth indicators, 2014–Quarter 2, 2016

    Data.gov (United States)

    U.S. Department of Health & Human Services — Provisional estimates of selected reproductive indicators from birth data for 2014 through the second quarter of 2016. Estimates are presented for: general fertility...

  8. Cultural Revitalization of Nanjing Republic Quarters:From the Perspective of Urban Organic Concentration Development Theory%南京民国城市空间段落的振兴--以城市有机集中发展理论为视角

    Institute of Scientific and Technical Information of China (English)

    翁达来

    2013-01-01

    The urban historical quarters are charged with the duties of preserving,spreading,and de-veloping culture. Nanjing Republic Urban Quarters grew out of the Capital Plan,the city construction plan made by the Republic of China and characterized by dispersing tendencies. But they do not hin-der the concentration development of the city today. Rather,they promote the development of urban organic concentration by playing the physical space role of organic dispersion. They also perform the double duties of sustaining and producing culture. Therefore,we should take more effective measures to make them an organic whole to promote the historical culture of the city. This will systematically push the organic concentration development of the Nanjing City.%  城市历史空间段落作为城市空间的重要组成单元承载着“文化贮存、文化传播和交流、文化创造和发展”的功能。南京民国建筑与街区脱胎于带有分散主义倾向的《首都计划》,但是它们并没有成为现代城市集中发展的阻碍,而是以有机疏散的空间角色推动城市的有机集中发展,并承担着延续和发展城市文化的双重任务。地方政府应采取更加有效的措施,使它们逐渐成为一个振兴城市历史文化的有机整体,更加系统地推动南京城市的有机集中发展。

  9. Approximating the DGP of China's Quarterly GDP

    NARCIS (Netherlands)

    Ph.H.B.F. Franses (Philip Hans); H. Mees (Heleen)

    2010-01-01

    textabstractWe demonstrate that the data generating process (DGP) of China’s cumulated quarterly Gross Domestic Product (GDP, current prices), as it is reported by the National Bureau of Statistics of China, can be (very closely) approximated by a simple rule. This rule is that annual growth in any

  10. 77 FR 3784 - ACHP Quarterly Business Meeting

    Science.gov (United States)

    2012-01-25

    ... From the Federal Register Online via the Government Publishing Office ADVISORY COUNCIL ON HISTORIC PRESERVATION ACHP Quarterly Business Meeting AGENCY: Advisory Council on Historic Preservation. ACTION: Notice... Implementation C. Bureau of Land Management Nationwide Programmatic Agreement VIII. New Business IX. Adjourn...

  11. Transient Fanconi syndrome in Quarter horses.

    Science.gov (United States)

    Ohmes, Cameon M; Davis, Elizabeth G; Beard, Laurie A; Vander Werf, Karie A; Bianco, Alex W; Giger, Urs

    2014-02-01

    Two Quarter horses with weight loss had glucosuria, euglycemia, and a mild metabolic acidosis suggesting a proximal renal tubular defect. Further testing revealed transient generalized aminoaciduria, lactic aciduria, and glucosuria, indicating Fanconi syndrome. Both horses recovered with supportive therapy. This is the first report of acquired Fanconi syndrome in horses.

  12. Apprentices and Trainees: March Quarter, 2010

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2010

    2010-01-01

    This publication presents estimates of apprentice and trainee activity in Australia for the March quarter 2010. The figures in this publication are derived from the National Apprentice and Trainee Collection no.64 (June 2010 estimates). The most recent figures in this publication are estimated (those for training activity from the September…

  13. Quarter-controlled milking in dairy cows

    NARCIS (Netherlands)

    Ipema, A.H.; Hogewerf, P.H.

    2008-01-01

    The design of a milking stall with special functions for monitoring and control is described. The milk removal process per quarter is described. The milking stall was equipped with four milk containers, whose advancing weight was recorded permanently. The data were online converted into milk flow ra

  14. Apprentices and Trainees: September Quarter, 2009

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2010

    2010-01-01

    This publication presents estimates of apprentice and trainee activity in Australia for the September quarter 2009. The figures in this publication are derived from the National Apprentice and Trainee Collection no. 62 (December 2009 estimates). There were 425,500 apprentices and trainees in-training as at 30 September 2009, a decrease of 2.4%…

  15. Apprentices and Trainees: December Quarter, 2009

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2010

    2010-01-01

    This publication presents estimates of apprentice and trainee activity in Australia for the December quarter 2009. The figures in this publication are derived from the National Apprentice and Trainee Collection no.63 (March 2010 estimates). There were 414 900 apprentices and trainees in-training as at 31 December 2009, a decrease of 0.6% from the…

  16. "Library Quarterly" Management Literature, 1931-2004

    Science.gov (United States)

    Young, Arthur P.

    2006-01-01

    Management literature appearing in "Library Quarterly," 1931-2004, is examined in this essay. A total of 145 articles are identified that focus on administrative and managerial issues related to libraries during this period. Management literature is construed expansively and includes accounting, administration, assessment, budgets, facilities,…

  17. Idaho National Laboratory Quarterly Performance Analysis - 3rd Quarter FY2014

    Energy Technology Data Exchange (ETDEWEB)

    Lisbeth A. Mitchell

    2014-09-01

    This report is published quarterly by the Idaho National Laboratory (INL) Performance Assurance Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of occurrence reports and other non-reportable issues identified at INL from July 2013 through June 2014.

  18. Idaho National Laboratory Quarterly Performance Analysis for the 2nd Quarter FY 2015

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth A. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-04-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of events for the 2nd Qtr FY-15.

  19. NEAMS Update. Quarterly Report for October - December 2011.

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, K. (Nuclear Engineering Division)

    2012-02-16

    The Advanced Modeling and Simulation Office within the DOE Office of Nuclear Energy (NE) has been charged with revolutionizing the design tools used to build nuclear power plants during the next 10 years. To accomplish this, the DOE has brought together the national laboratories, U.S. universities, and the nuclear energy industry to establish the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program. The mission of NEAMS is to modernize computer modeling of nuclear energy systems and improve the fidelity and validity of modeling results using contemporary software environments and high-performance computers. NEAMS will create a set of engineering-level codes aimed at designing and analyzing the performance and safety of nuclear power plants and reactor fuels. The truly predictive nature of these codes will be achieved by modeling the governing phenomena at the spatial and temporal scales that dominate the behavior. These codes will be executed within a simulation environment that orchestrates code integration with respect to spatial meshing, computational resources, and execution to give the user a common 'look and feel' for setting up problems and displaying results. NEAMS is building upon a suite of existing simulation tools, including those developed by the federal Scientific Discovery through Advanced Computing and Advanced Simulation and Computing programs. NEAMS also draws upon existing simulation tools for materials and nuclear systems, although many of these are limited in terms of scale, applicability, and portability (their ability to be integrated into contemporary software and hardware architectures). NEAMS investments have directly and indirectly supported additional NE research and development programs, including those devoted to waste repositories, safeguarded separations systems, and long-term storage of used nuclear fuel. NEAMS is organized into two broad efforts, each comprising four elements. The quarterly highlights October

  20. Quarterly coal report July--September 1996, February 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for July through September 1996 and aggregated quarterly historical data for 1990 through the second quarter of 1996. Appendix A displays, from 1988 on, detailed quarterly historical coal imports data. 8 figs., 72 tabs.

  1. Positron Channeling

    CERN Document Server

    Badikyan, Karen

    2016-01-01

    The possibility of channeling the low-energy relativistic positrons around separate crystallographic axes with coaxial symmetry of negative ions in some types of crystals is shown. The process of annihilation of positrons with electrons of medium was studied in detail.

  2. Development of Relations of Stream Stage to Channel Geometry and Discharge for Stream Segments Simulated with Hydrologic Simulation Program-Fortran (HSPF), Chesapeake Bay Watershed and Adjacent Parts of Virginia, Maryland, and Delaware

    Science.gov (United States)

    Moyer, Douglas; Bennett, Mark

    2007-01-01

    The U.S. Geological Survey (USGS), U.S. Environmental Protection Agency (USEPA), Chesapeake Bay Program (CBP), Interstate Commission for the Potomac River Basin (ICPRB), Maryland Department of the Environment (MDE), Virginia Department of Conservation and Recreation (VADCR), and University of Maryland (UMD) are collaborating to improve the resolution of the Chesapeake Bay Regional Watershed Model (CBRWM). This watershed model uses the Hydrologic Simulation Program-Fortran (HSPF) to simulate the fate and transport of nutrients and sediment throughout the Chesapeake Bay watershed and extended areas of Virginia, Maryland, and Delaware. Information from the CBRWM is used by the CBP and other watershed managers to assess the effectiveness of water-quality improvement efforts as well as guide future management activities. A critical step in the improvement of the CBRWM framework was the development of an HSPF function table (FTABLE) for each represented stream channel. The FTABLE is used to relate stage (water depth) in a particular stream channel to associated channel surface area, channel volume, and discharge (streamflow). The primary tool used to generate an FTABLE for each stream channel is the XSECT program, a computer program that requires nine input variables used to represent channel morphology. These input variables are reach length, upstream and downstream elevation, channel bottom width, channel bankfull width, channel bankfull stage, slope of the floodplain, and Manning's roughness coefficient for the channel and floodplain. For the purpose of this study, the nine input variables were grouped into three categories: channel geometry, Manning's roughness coefficient, and channel and floodplain slope. Values of channel geometry for every stream segment represented in CBRWM were obtained by first developing regional regression models that relate basin drainage area to observed values of bankfull width, bankfull depth, and bottom width at each of the 290 USGS

  3. Comments on Ionization Cooling Channel Characteristics

    OpenAIRE

    Neuffer, David

    2013-01-01

    Ionization cooling channels with a wide variety of characteristics and cooling properties are being developed. These channels can produce cooling performances that are largely consistent with the ionization cooling theory developed previously. In this paper we review ionization cooling theory, discuss its application to presently developing cooling channels, and discuss criteria for optimizing cooling.

  4. Development of a channel classification to evaluate potential for cottonwood restoration, lower segments of the Middle Missouri River, South Dakota and Nebraska

    Science.gov (United States)

    Jacobson, Robert B.; Elliott, Caroline M.; Huhmann, Brittany L.

    2010-01-01

    This report documents development of a spatially explicit river and flood-plain classification to evaluate potential for cottonwood restoration along the Sharpe and Fort Randall segments of the Middle Missouri River. This project involved evaluating existing topographic, water-surface elevation, and soils data to determine if they were sufficient to create a classification similar to the Land Capability Potential Index (LCPI) developed by Jacobson and others (U.S. Geological Survey Scientific Investigations Report 2007–5256) and developing a geomorphically based classification to apply to evaluating restoration potential.Existing topographic, water-surface elevation, and soils data for the Middle Missouri River were not sufficient to replicate the LCPI. The 1/3-arc-second National Elevation Dataset delineated most of the topographic complexity and produced cumulative frequency distributions similar to a high-resolution 5-meter topographic dataset developed for the Lower Missouri River. However, lack of bathymetry in the National Elevation Dataset produces a potentially critical bias in evaluation of frequently flooded surfaces close to the river. High-resolution soils data alone were insufficient to replace the information content of the LCPI. In test reaches in the Lower Missouri River, soil drainage classes from the Soil Survey Geographic Database database correctly classified 0.8–98.9 percent of the flood-plain area at or below the 5-year return interval flood stage depending on state of channel incision; on average for river miles 423–811, soil drainage class correctly classified only 30.2 percent of the flood-plain area at or below the 5-year return interval flood stage. Lack of congruence between soil characteristics and present-day hydrology results from relatively rapid incision and aggradation of segments of the Missouri River resulting from impoundments and engineering. The most sparsely available data in the Middle Missouri River were water

  5. Development and characterization of 12 microsatellite markers for the Island Night Lizard (Xantusia riversiana), a threatened species endemic to the Channel Islands, California, USA

    Science.gov (United States)

    O'Donnell, Ryan P.; Drost, Charles A.; Mock, Karen E.

    2014-01-01

    The Island Night Lizard is a federally threatened species endemic to the Channel Islands of California. Twelve microsatellite loci were developed for use in this species and screened in 197 individuals from across San Nicolas Island, California. The number of alleles per locus ranged from 6 to 21. Observed heterozygosities ranged from 0.520 to 0.843. These microsatellite loci will be used to investigate population structure, effective population size, and gene flow across the island, to inform protection and management of this species.

  6. Silicon-on-ceramic process: silicon sheet growth and device development for the Large-Area Silicon Sheet and Cell Development Tasks of the Low-Cost Solar Array Project. Quarterly report No. 11, January 1-March 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, P.W.; Zook, J.D.; Heaps, J.D.; Grung, B.L.; Koepke, B.; Schuldt, S.B.

    1979-04-30

    The purpose of the research program is to investigate the technical and economic feasibility of producing solar-cell-quality sheet silicon by coating inexpensive ceramic substrates with a thin layer of polycrystalline silicon. The coating methods to be developed are directed toward a minimum-cost process for producing solar cells with a terrestrial conversion efficiency of 12 percent or greater. By applying a graphite coating to one face of a ceramic substrate, molten silicon can be caused to wet only that graphite-coated face and produce uniform thin layers of large-grain polycrystalline silicon; thus, only a minimal quantity of silicon is consumed. A dip-coating method for putting silicon on ceramic (SOC) has been shown to produce solar-cell-quality sheet silicon. This method and a continuous coating process also being investigated have excellent scale-up potential which offers an outstanding, cost-effective way to manufacture large-area solar cells. Results and accomplishments are described.

  7. Design and test of a 64-channel charge measurement ASIC developed in CMOS 0.35 {mu}m technology

    Energy Technology Data Exchange (ETDEWEB)

    La Rosa, A. [Dipartimento di Fisica Sperimentale, Universita di Torino, Via P. Giuria 1, Turin 10125 (Italy); INFN, Via P. Giuria 1, Turin 10125 (Italy)], E-mail: larosa@to.infn.it; Mazza, G. [INFN, Via P. Giuria 1, Turin 10125 (Italy); Donetti, M. [INFN, Via P. Giuria 1, Turin 10125 (Italy); Fondazione CNAO, Via Caminadella 16, Milano 20123 (Italy); Marchetto, F. [INFN, Via P. Giuria 1, Turin 10125 (Italy); Luetto, L. [Dipartimento di Fisica Sperimentale, Universita di Torino, Via P. Giuria 1, Turin 10125 (Italy); Attili, A. [INFN, Via P. Giuria 1, Turin 10125 (Italy); Bourhaleb, F. [Dipartimento di Fisica Sperimentale, Universita di Torino, Via P. Giuria 1, Turin 10125 (Italy); Cirio, R.; Garella, M.A.; Giordanengo, S. [INFN, Via P. Giuria 1, Turin 10125 (Italy); Givehchi, N. [Dipartimento di Fisica Sperimentale, Universita di Torino, Via P. Giuria 1, Turin 10125 (Italy); INFN, Via P. Giuria 1, Turin 10125 (Italy); Iliescu, S.; Pardo, J. [INFN, Via P. Giuria 1, Turin 10125 (Italy); Pecka, A.; Peroni, C. [Dipartimento di Fisica Sperimentale, Universita di Torino, Via P. Giuria 1, Turin 10125 (Italy); INFN, Via P. Giuria 1, Turin 10125 (Italy); Pitta, G. [Fondazione TERA, Via Puccini 11, Novara 28100 (Italy)

    2007-12-21

    A 64-channel charge measurement (Application-Specific Integrated Circuit) ASIC has been designed and tested: it is intended to serve as a front-end electronic read-out for detectors to monitor and measure radiotherapeutical beams. The ASIC has been designed in a CMOS 0.35 {mu}m technology with particular attention to the linearity over a wide input range and can accept currents of both polarities. The linearity is better than 1.5% for a dynamic range of the input current between 500 pA and 3 {mu}A. For a charge resolution of 350 fC, the spread (r.m.s.) of the gain is less than 1%.

  8. Design and test of a 64-channel charge measurement ASIC developed in CMOS 0.35 μm technology

    Science.gov (United States)

    La Rosa, A.; Mazza, G.; Donetti, M.; Marchetto, F.; Luetto, L.; Attili, A.; Bourhaleb, F.; Cirio, R.; Garella, M. A.; Giordanengo, S.; Givehchi, N.; Iliescu, S.; Pardo, J.; Pecka, A.; Peroni, C.; Pittà, G.

    2007-12-01

    A 64-channel charge measurement (Application-Specific Integrated Circuit) ASIC has been designed and tested: it is intended to serve as a front-end electronic read-out for detectors to monitor and measure radiotherapeutical beams. The ASIC has been designed in a CMOS 0.35 μm technology with particular attention to the linearity over a wide input range and can accept currents of both polarities. The linearity is better than 1.5% for a dynamic range of the input current between 500 pA and 3 μA. For a charge resolution of 350 fC, the spread (r.m.s.) of the gain is less than 1%.

  9. Analysis of Development of Channels Crossing Huangpu River in Shanghai Urban Area%上海中心城区越江隧道发展分析

    Institute of Scientific and Technical Information of China (English)

    周翔

    2012-01-01

      从黄浦江在上海城市发展中的重要性出发,依次分析了上海越江隧道建设在探索期、起步期和发展期的背景、意图和技术水平。从设施建设、交通运行与需求、交通量变化特征等方面剖析了现状越江隧道发展与城市的关系,并提出了未来上海中心城区的越江隧道规划设想。%  From the viewpoint of the position of Huangpu River in the development of Shanghai city, the background, view and technical level of channels crossing Huangpu River during exploring period, starting period and developing period are analyzed, with the aspects of facility construction, characteristics of traffic demand and volume, the relationship of development of current channels and urbanism. Future long-term planning scheme is also proposed.

  10. Silicon-on-ceramic coating process. Silicon sheet growth development for the Large-Area Silicon Sheet and Cell Development Tasks of the Low-Cost Silicon Solar Array Project. Quarterly report No. 8, December 28, 1977--March 28, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, P.W. Zook, J.D.; Heaps, J D; Maclolek, R B; Koepke, B; Butter, C D; Schult, S B

    1978-04-20

    A research program to investigate the technical and economic feasibility of producing solar-cell-quality sheet silicon by coating inexpensive ceramic substrates with a thin layer of polycrystalline silicon is described. The coating methods to be developed are directed toward a minimum-cost process for producing solar cells with a terrestrial conversion efficiency of 12 percent or greater. By applying a graphite coating to one face of a ceramic substrate, molten silicon can be caused to wet only that graphite-coated face and produce uniform thin layers of large-grain polycrystalline silicon; thus, only a minimal quantity of silicon is consumed. A dip-coating method for putting silicon on ceramic (SOC) has been shown to produce solar-cell-quality sheet silicon. This method and a continuous coating process also being investigated have excellent scale-up potential which offers an outstanding cost-effective way to manufacture large-area solar cells. A variety of ceramic materials have been dip-coated with silicon. The investigation has shown that mullite substrates containing an excess of SiO/sub 2/ best match the thermal expansion coefficient of silicon and hence produce the best SOC layers. With such substrates, smooth and uniform silicon layers 25 cm/sup 2/ in area have been achieved with single-crystal grains as large as 4 mm in width and several cm in length. Solar cells with areas from 1 to 10 cm/sup 2/ have been fabricated from material withas-grown surface. Recently, an antireflection (AR) coating has been applied to SOC cells. Conversion efficiencies greater than 9% have been achieved without optimizing series resistance characteristics. Such cells typically have open-circuit voltages and short-circuit current densities of 0.51 V and 20 mA/cm/sup 2/, respectively.

  11. Potassium channels in barley: cloning, functional characterization and expression analyses in relation to leaf growth and development.

    Science.gov (United States)

    Boscari, Alexandre; Clément, Mathilde; Volkov, Vadim; Golldack, Dortje; Hybiak, Jolanta; Miller, Anthony J; Amtmann, Anna; Fricke, Wieland

    2009-12-01

    It is not known how the uptake and retention of the key osmolyte K(+) in cells are mediated in growing leaf tissue. In the present study on the growing leaf 3 of barley, we have cloned the full-length coding sequence of three genes which encode putative K(+) channels (HvAKT1, HvAKT2, HvKCO1/HvTPK1), and of one gene which encodes a putative K(+) transporter (HvHAK4). The functionality of the gene products of HvAKT1 and HvAKT2 was tested through expression in Xenopus laevis oocytes. Both are inward-rectifying K(+) channels which are inhibited by Cs(+). Function of HvAKT1 in oocytes requires co-expression of a calcineurin-interacting protein kinase (AtCIPK23) and a calcineurin B-like protein (AtCBL9) from Arabidopsis, showing cross-species complementation of function. In planta, HvAKT1 is expressed primarily in roots, but is also expressed in leaf tissue. HvAKT2 is expressed particularly in leaf tissue, and HvHAK4 is expressed particularly in growing leaf tissue. Within leaves, HvAKT1 and HvAKT2 are expressed predominantly in mesophyll. Expression of genes changes little in response to low external K(+) or salinity, despite major changes in K(+) concentrations and osmolality of cells. Possible contributions of HvAKT1, HvAKT2, HvKCO1 and HvHAK4 to regulation of K(+) relations of growing barley leaf cells are discussed.

  12. Channel Power in Multi-Channel Environments

    NARCIS (Netherlands)

    M.G. Dekimpe (Marnik); B. Skiera (Bernd)

    2004-01-01

    textabstractIn the literature, little attention has been paid to instances where companies add an Internet channel to their direct channel portfolio. However, actively managing multiple sales channels requires knowing the customers’ channel preferences and the resulting channel power. Two key compon

  13. Forming of single-thread channels and multiple channel rivers on Titan and Earth

    Science.gov (United States)

    Misiura, Katarzyna; Czechowski, Leszek

    2016-10-01

    In our research we use numerical model of the river to determine the limits of different fluvial parameters that play important roles in evolution of the rivers on Titan and on Earth. We have found that transport of sediments as suspended load is the main way of transport for Titan [1]. We also determined the range of the river's parameters for which multiple channel rivers are developed rather than single channel. This work is aimed to investigate the similarity and differences between these processes on Titan and the Earth.Numerical modelThe dynamical analysis of the considered rivers is performed using the package CCHE modified for the specific conditions on Titan. The package is based on the Navier-Stokes equations for depth-integrated two dimensional, turbulent flow and three dimensional convection-diffusion equation of sediment transport. We use the same numerical package that in our previous work [1] and [2], i.e. CCHE2D package.Parameters of the modelFor Titan we consider liquid corresponding to a Titan's rain (75% methane, 25% nitrogen) and water ice as material transported in rivers, for Earth the water and the quartz. We model evolution of the river for at least 100-200 days.Results and ConclusionsOur preliminary results indicate that suspended load is the main way of transport in simulated Titan's conditions. We also indicate that multiple channel rivers appears for larger range of slope on Titan (e.g. S=0.01-0.04) than on Earth (e.g. S=0.004-0.009). Also, for the same type of river, the grain size on Titan is at least 10 times larger than on Earth (1 cm for Titan versus 1 mm for the Earth). It is very interesting that on Titan multiple channel rivers appear even for very little discharge (e.g. Q=30m3/s) and for very large grain size (e.g. 10 cm). In the future we plan the experimental modelling in sediment basin to confirm results from computer modelling.References[1] Misiura, K., Czechowski, L., 2015. Numerical modelling of sedimentary structures in

  14. Coal gasification. Quarterly report, April--June 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-01-01

    The conversion of coal to high-Btu gas requires a chemical and physical transformation of solid coal. However, because coal has widely differing chemical and physical properties, depending on where it is mined, it is difficult to process. Therefore, to develop the most suitable techniques for gasifying coal, ERDA, together with the American Gas Association, is sponsoring the development of several advanced conversion processes. Although the basic coal-gasification chemical reactions are the same for each process, the processes under development have unique characteristics. A number of the processes for converting coal to high Btu and to low Btu gas have reached the pilot plant stage. The responsibility for designing, constructing and operating each of these pilot plants is defined and progress on each during the quarter is described briefly. The accumulation of data for a coal gasification manual and the development of mathematical models of coal gasification processes are reported briefly. (LTN)

  15. Laser-zone growth in a ribbon-to-ribbon (RTR) process silicon sheet growth development for the large area silicon sheet task of the Low Cost Solar Array Project. Technical quarterly report No. 10, January 1-March 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Baghdadi, A.; Gurtler, R.W.; Legge, R.; Sopori, B.; Rice, M.J.; Ellis, R.J.

    1979-01-01

    This quarter has witnessed appreciable progress in achieving high efficiency on RTR solar cells, with an average efficiency of 9.1% on the most recent lot. The best cell to date has a measured efficiency of 11.3%. A new technique for growing limited-length ribbons continually has been demonstrated. This Rigid Edge technique can be used to recrystallize about 95% of the polyribbon feedstock. A major advantage of this method is that only a single, constant length silicon ribbon is handled throughout the entire process sequence; this may be accomplished using cassettes similar to those presently in use for processing Czochralski wafers. Thus a transition from Cz to ribbon technology can be smoothly affected. The maximum size being considered, 3'' x 24'', is half a square foot and will generate 6 watts for 12% efficiency at 1 sun. Silicon dioxide has been demonstrated as an effective, practical diffusion barrier for use during the polyribbon formation. Two different approaches for using the silicon dioxide are being pursued.

  16. TRP channels and psychiatric disorders.

    Science.gov (United States)

    Chahl, Loris A

    2011-01-01

    Depression and schizophrenia are major psychiatric disorders that cause much human suffering. Current treatments have major limitations and new drug targets are eagerly sought. Study of transient receptor potential (TRP) channels in these disorders is at an early stage and the potential of agents that activate or inhibit these channels remains speculative. The findings that TRPC6 channels promote dendritic growth and are selectively activated by hyperforin, the key constitutent of St John's wort, suggest that TRPC6 channels might prove to be a new target for antidepressant drug development. There is now considerable evidence that TRPV1 antagonists have anxiolytic activity but there is no direct evidence that they have antidepressant activity. There is also no direct evidence that TRP channels play a role in schizophrenia. However, the findings that TRPC channels are involved in neuronal development and fundamental synaptic mechanisms, and that TRPV1 channels play a role in central dopaminergic and cannabinoid mechanisms is suggestive of potential roles of these channels in schizophrenia. Investigation of TRP channels in psychiatric disorders holds the promise of yielding further understanding of the aetiology of psychiatric disorders and the development of new drug treatments.

  17. 网购对家电企业渠道的影响分析及发展建议%Analysis and development proposals of channels for household electrical appliance enterprises by online shopping

    Institute of Scientific and Technical Information of China (English)

    蒋良骏

    2012-01-01

    随着我国网络购物的快速发展,越来越多的消费者纷纷通过网络来购买家电,网络即将成为家电市场的第三大渠道形态。网购对于家电企业的渠道而言具有拓展销售渠道、增强渠道控制力、降低渠道成本、加剧渠道冲突等影响。为此,家电企业可以采取密切与网络渠道的合作、加强对网络渠道的管控、在城镇及农村市场构建多元化的渠道体系、拓展新兴渠道举措来应对,最终使家电企业渠道得到更好的发展。%With the rapid development of online shopping in China,more and more consumers buy electrical appliances through internet,thus network appliances market will soon become the third largest channel.Online shopping influences channels for household electrical appliance enterprises so as to expand sales channels,enhance channel control,reduce costs of distribution and exacerbate channel conflict.To this end,the household electrical appliance enterprises can take close cooperation with the network channels,strengthen the management and control of network channels,build a wide range of channels system in urban and rural markets,develop new channel initiatives,and ultimately make channels for household electrical appliance enterprises be stronger.

  18. FY 1991 environmental research programs for the DOE Field Office, Nevada: Work plan and quarterly reports, fourth quarter report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-10-01

    This research includes a wide range of research and support activities associated with the Weapons Testing Program conducted at the Nevada Test Site (NTS). Ongoing and new environmental research programs to be conducted by DRI over the period of this contract include archaeological studies, site mitigation plans, compliance activities, and historical research; offsite community radiation monitoring support; environmental compliance activities related to state and federal regulations; hydrologic assessment of containment of underground nuclear detonations; hydrology/radionuclide investigations designed to better understand and predict the possible subsurface movement of radionuclides at the NTS; and support of various statistical and data management and design, laboratory, field, and administrative activities. In addition to these, archaeological site characterization, flood hazards for rail transportation, and paleofaunal investigations will be carried out in support of the Yucca Mountain Project. Other areas of the overall program which required DRI support are classified security activities, radiation safety and training, quality assurance and control, computer protection and historical data management, review and classification of DRI documents, and preparation of any special reports, e.g., quarterly reports, not included in the requirements of the individual projects. A new set of programs funded by the Office of Technology Development will be in place by the third quarter of FY 1991. These projects will address environmental restoration and waste management concerns, among other related topics. In accordance with specific contract requirements for each activity, DRI will produce summary, status and final reports and, in some cases, journal articles which will present the results of specific research efforts. This document contains the work plan, including project descriptions, tasks, deliverables and quarterly progress reports on each project for FY 1991.

  19. FY 1991 environmental research programs for the Nevada Operations Office: Work plan and quarterly reports, first and second quarter reports

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-05-01

    The work carried out on behalf of the DOE by the Desert Research Institute (DRI) includes a wide range of research and support activities associated with the Weapons Testing Program conducted at the Nevada Test Site (NTS). Ongoing and new environmental research programs to be conducted by DRI over the period of this contract include archaeological studies, site mitigation plans, compliance activities, and historical research; offsite community radiation monitoring support; environmental compliance activities related to stat and federal regulations; hydrologic assessment of containment of underground nuclear detonations; hydrology/radionuclide investigations designed to better understand and predict the possible subsurface movement of radionuclides at the NTS; and support of various statistical and data management and design, laboratory, field, and administrative activities. In addition to these, archaeological site characterization, flood hazards for rail transportation, and paleofaunal investigations will be carried out in support of the Yucca Mountain Project. Other areas of the overall program which require DRI support are classified security activities, radiation safety and training, quality assurance and control, computer protection and historical data management, review and classification of DRI documents, and preparation of any special reports, e.g., quarterly reports, not included in the requirements of the individual projects. A new set of programs funded by the Office of Technology Development will be in place by the third quarter of FY 1991. These projects will address environmental restoration and waste management concerns, among other related topics. This document contains the Work Plan, including project descriptions, tasks, deliverables and quarterly progress reports on each project for FY 1991.

  20. Physical protection of nuclear facilities. Quarterly progress report, January--March 1977

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, L.D. (ed.)

    1977-07-01

    The physical protection of nuclear facilities program consists of four major areas--evaluation methodology development, path generation/selection methodology, facility characterization, and component functional performance characterization. Activities in each of these areas for the second quarter of FY 77 are summarized.

  1. Inertial confinement fusion quarterly report, July--September 1994. Volume 4, Number 4

    Energy Technology Data Exchange (ETDEWEB)

    Honea, E. [ed.

    1994-09-01

    The ICF Quarterly continues with six articles in this issue describing recent developments in the Inertial Confinement Fusion (ICF) Program at Lawrence Livermore National Laboratory. The topics include plasma characterization, production of millimeter scale-length plasmas for studying laser-plasma instabilities, hohlraum physics, three-dimensional hydrodynamic modeling, crystal growth, and laser-beam smoothing.

  2. EDIN-USVI Clean Energy Quarterly: Volume 1, Issue 3, September 2011 (Newsletter)

    Energy Technology Data Exchange (ETDEWEB)

    2011-09-01

    This quarterly newsletter provides timely news and information about the plans and progress of the Energy Development in Island Nations-U.S. Virgin Islands pilot project, including significant events and milestones, work undertaken by each of the five working groups, and project-related renewable energy and energy efficiency educational outreach and technology deployment efforts.

  3. DOE/FETC GASIS project. Quarterly report, September 1--November 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This report summarizes technical progress on the GASIS [Gas AtlaS Information System] project during the quarter. During this period, work was performed on Task 3: Natural gas reservoir data system development, Task 4: Technology transfer, Task 8: Reservoir data system updates, and Task 9: Supplemental reservoir studies.

  4. EDIN-USVI Clean Energy Quarterly: Volume 2, Issue 1, June 2012 (Newsletter)

    Energy Technology Data Exchange (ETDEWEB)

    2012-06-01

    This quarterly newsletter provides timely news and information about the plans and progress of the Energy Development in Island Nations-U.S. Virgin Islands pilot project, including significant events and milestones, work undertaken by each of the working groups, and project-related technology deployment efforts.

  5. Nuclear materials stabilization and packaging. Quarterly status report, January 1--March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Haschke, J.M.; Horrell, D.R.; Hoth, C.W.; Fife, K.W.; Nielsen, J.B.; Pierce, S.W.; Ricketts, T.E.; Rink, N.A.; Robinson, M.A.

    1996-08-01

    This report documents progress on the Los Alamos Nuclear Materials Stabilization and Packaging projects for the second quarter of FY 1996. It covers development and production activities for the Plutonium Packaging Project, the Plutonium Recovery and Processing Project, and the Uranium Recovery and Processing Project. In addition, it reports on quality assurance activities for the Plutonium Packaging Project.

  6. Applied Meteorology Unit Quarterly Report, Second Quarter FY-13

    Science.gov (United States)

    Bauman, William; Crawford, Winifred; Watson, Leela; Shafer, Jaclyn; Huddleston, Lisa

    2013-01-01

    The AMU team worked on six tasks for their customers: (1) Ms. Crawford continued work on the objective lightning forecast task for airports in east-central Florida, and began work on developing a dual-Doppler analysis with local Doppler radars, (2) Ms. Shafer continued work for Vandenberg Air Force Base on an automated tool to relate pressure gradients to peak winds, (3) Dr. Huddleston continued work to develop a lightning timing forecast tool for the Kennedy Space Center/Cape Canaveral Air Force Station area, (4) Dr. Bauman continued work on a severe weather forecast tool focused on east-central Florida, (5) Mr. Decker began developing a wind pairs database for the Launch Services Program to use when evaluating upper-level winds for launch vehicles, and (6) Dr. Watson began work to assimilate observational data into the high-resolution model configurations, she created for Wallops Flight Facility and the Eastern Range.

  7. Lawrence Livermore National Laboratory safeguards and security quarterly progress report to the US Department of Energy, quarter ending March 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Ruhter, W.D.; Strait, R.S.; Mansur, D.L.; Davis, G.

    1993-04-01

    This quarterly report discusses activities in the Safeguards Technology Program (STP) which is a program in LLNL`s Nuclear Chemistry Division that develop advanced, nondestructive-analysis (NDA) technology for measurement of special nuclear materials. The work focuses on R&D relating to x{minus} and gamma-ray spectrometry techniques and to the development of computer codes for interpreting the spectral data obtained by these techniques.

  8. Applied Meteorology Unit (AMU) Quarterly Report Fourth Quarter FY-13

    Science.gov (United States)

    Bauman, William; Crawford, Winifred; Watson, Leela; Shafer, Jaclyn; Huddleston, Lisa

    2013-01-01

    Ms. Shafer completed the task to determine relationships between pressure gradients and peak winds at Vandenberg Air Force Base (VAFB), and began developing a climatology for the VAFB wind towers; Dr. Huddleston completed the task to develop a tool to help forecast the time of the first lightning strike of the day in the Kennedy Space Center (KSC)/Cape Canaveral Air Force Station (CCAFS) area; Dr. Bauman completed work on a severe weather forecast tool focused on the Eastern Range (ER), and also developed upper-winds analysis tools for VAFB and Wallops Fl ight Facility (WFF); Ms. Crawford processed and displayed radar data in the software she will use to create a dual-Doppler analysis over the east-central Florida and KSC/CCAFS areas; Mr. Decker completed developing a wind pairs database for the Launch Services Program to use when evaluating upper-level winds for launch vehicles; Dr. Watson continued work to assimilate observational data into the high-resolution model configurations she created for WFF and the ER.

  9. Development and field example of multi channel surface wave data acquisition and processing system (SWS-1); Multi channel hyomenha data shutoku shori system (SWS-1) no kaihatsu to jikkenrei

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Y. [Huashui Institute of Geophysical Exploration, (China); Wang, Z. [Bureauof Engineering MGMR, (China); Zhang, Z [STG Corp., (China); Tanaka, Y.

    1996-05-01

    A report is given here about the use of a newly-developed multi-channel surface wave data acquisition and processing system different from the conventional surface wave exploration device. This system enables the on-site pickup of a dispersion curve out of the multi-component surface wave data and, in the analysis of underground structure, performs the forward modeling and inversion. The system, furthermore, acquires and analyzes the data obtained from reflection earthquake exploration and constant microtremor observation. During a survey conducted along the highway from Port Ren-un to Xuzhou, China, estimation of the basement boundary was made by use of dynamite, and what was obtained agreed with the result of boring though with an error of 3m. In addition, this system could probe levels deeper than 100m using the instantaneous Rayleigh wave exploration method. This system and the conventional surface exploration device were compared in a soft ground in Fukui Prefecture, the former using a 10kg hammer and the latter using a 350kg exciter, when it was verified that the results produced by both techniques excellently agree with the geologic columnar section and changes in the N-value. 4 refs., 4 figs.

  10. Development of ultrafine-grained microstructure in Al-Cu-Mg alloy through equal-channel angular pressing

    Science.gov (United States)

    Sai Anuhya, Danam; Gupta, Ashutosh; Nayan, Niraj; Narayana Murty, S. V. S.; Manna, R.; Sastry, G. V. S.

    2014-08-01

    Al-Cu-Mg alloys are extensively used for riveting applications in aerospace industries due to their relatively high shear strength coupled with high plasticity. The significant advantage of using V65 aluminum alloy ((Al-4Cu-0.2Mg) for rivet application also stems from its significantly slower natural aging kinetics, which gives operational flexibility to carryout riveting operation even after 4 days of solution heat treatment, in contrast to its equivalent alloy AA2024.Rivets are usually made by cold heading of wire rods. In order to form a defect free rivet head, grain size control in wire rods is essential at each and every stage of processing right from casting onwards upto the final wire drawing stage. Wire drawing is carried out at room temperature to reduce diameter as well as impart good surface finish. In the present study, different microstructures in V65 alloy bars were produced by rolling at different temperatures (room temperature to 523K) and subsequently deformed by equal channel angular pressing (ECAP) at 423K upto an equivalent strain of 7. ECAP was carried out to study the effect of initial microstructure on grain refinement and degree of deformation on the evolution of ultrafine grain structure. The refinement of V65 alloy by ECAP is significantly influenced by Initial microstructure but amount of deformation strongly affects the evolution processes as revealed by optical microscopy and transmission electron microscopy.

  11. Mixed Waste Management Facility groundwater monitoring report. Second quarter 1994

    Energy Technology Data Exchange (ETDEWEB)

    Chase, J.A.

    1994-09-01

    Currently, 125 wells monitor groundwater quality in the uppermost aquifer beneath the Mixed Waste Management Facility (MWMF) at the Savannah River Site. Samples from the wells are analyzed for selected heavy metals, indicator parameters, radionuclides, volatile organic compounds, and other constituents. During second quarter 1994, chloroethene (vinyl chloride), 1,1-dichloroethylene, gross alpha, lead, tetrachloroethylene, trichloroethylene, or tritium exceeded final Primary Drinking Water Standards (PDWS) in approximately half of the downgradient wells at the MWMF. Consistent with historical trends, elevated constituent levels were found primarily in Aquifer Zone. As in previous quarters, tritium and trichloroethylene were the most widespread elevated constituents during second quarter 1994. Sixty-two of the 125 monitoring wells contained elevated tritium activities. Trichloroethylene concentrations exceeded the final PDWS in 23 wells. Chloroethene, 1,1-dichloroethylene, lead, and tetrachloroethylene, elevated in one or more wells during second quarter 1994, also occurred in elevated levels during first quarter 1994. These constituents generally were elevated in the same wells during both quarters. Gross alpha, which was not elevated in any well during first quarter 1994, was elevated in one well during second quarter. Copper, mercury, and nonvolatile beta were elevated during first quarter 1994 but not during second quarter.

  12. Review of the Proposed Quarterly Coal Review

    Energy Technology Data Exchange (ETDEWEB)

    1981-04-01

    This Review of the Proposed Quarterly Coal Review is the second of two reports and contains the results of our analysis of issues regarding the publication of a new summary publication, the Quarterly Coal Review. The first report on the QCR was submitted to the Office of Energy Data Operations (OEDO) in January 1981 and included results of our analysis and recommendations concerning data availability and content organization. This report concentrates on data presentation and publication format for the proposed QCR. Comprised of two sections, the report addresses chapter and table formats and presents a detailed analysis of chapter content. The first section of this report, Chapter, Table and Graph Formats, consists of findings and recommendations on the ordering, titling, end notes and cosmetics of the tables proposed for the QCR. The next section, Detailed Analysis of Chapter Content, is the result of a more in-depth analysis of chapters in the QCR.

  13. Quarterly Web Interfaced Commodity Reporting

    Data.gov (United States)

    US Agency for International Development — QWICR is a secure, online Title II commodity reporting system accessible to USAID Missions, PVO Cooperating Sponsors and Food for Peace Officers. QWICR provides PVO...

  14. Environmental Hazards Assessment Program. Quarterly report, July--September 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-31

    This report describes activities and reports on progress for the first quarter (July--September) of the fourth year of the grant to support the Environmental Hazards Assessment Program (EHAP) at the Medical University of South Carolina. It reports progress against the grant objectives and the Program Implementation Plan published at the end of the first year of the grant. The objectives of EHAP stated in the proposal to DOE are to: (1) develop a holistic, national basis for risk assessment, risk management, and risk communication that recognizes the direct impact of environmental hazards on the health and well-being of all; (2) develop a pool of talented scientists and experts in cleanup activities, especially in human health aspects; and (3) identify needs and develop programs addressing the critical shortage of well-educated, highly-skilled technical and scientific personnel to address the health-oriented aspects of environmental restoration and waste management.

  15. Environmental Hazards Assessment Program. Quarterly report, April--June 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-31

    The objectives of this report are to: (1) develop a holistic, national basis for risk assessment, risk management, and risk communication that recognizes the direct impact of environmental hazards, both chemical and radiation, on the health and well-being of all; (2) develop a pool of talented scientists and experts in cleanup activities, especially in human health aspects; and (3) identify needs and develop programs addressing the critical shortage of well-educated, highly-skilled technical and scientific personnel to address the health oriented aspects of environmental restoration and waste management. This report describes the progress made this quarter in the following areas: public and professional outreach; science programs; clinical programs; and information support and access systems.

  16. Applied Meteorology Unit (AMU) Quarterly Report Fourth Quarter FY-14

    Science.gov (United States)

    Bauman, William H.; Crawford, Winifred C.; Watson, Leela R.; Shafer, Jaclyn

    2014-01-01

    Ms. Crawford completed the final report for the dual-Doppler wind field task. Dr. Bauman completed transitioning the 915-MHz and 50-MHz Doppler Radar Wind Profiler (DRWP) splicing algorithm developed at Marshall Space Flight Center (MSFC) into the AMU Upper Winds Tool. Dr. Watson completed work to assimilate data into model configurations for Wallops Flight Facility (WFF) and Kennedy Space Center/Cape Canaveral Air Force Station (KSC/CCAFS). Ms. Shafer began evaluating the a local high-resolution model she had set up previously for its ability to forecast weather elements that affect launches at KSC/CCAFS. Dr. Watson began a task to optimize the data-assimilated model she just developed to run in real time.

  17. A Notice Soliciting Contribution to Peace Quarterly

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Dear readers at home and abroad:Peace quarterly in English is published by the Chinese People’s Association for Peace and Disarmament(CPAPD)since its founding in June 1985.Over the past 30 years,we have received kind support from all your readers in China and overseas.We wish to take this opportunity to express our appreciation to you all from the bottom of our hearts.

  18. Joint Force Quarterly. Number 26, Autumn 2000

    Science.gov (United States)

    2001-01-01

    monocle visual dis- play in the Land Warrior helmet shows maps, data, position, manuals , and orders from head- quarters. Microtechnology makes possible a...Revolu- cionario Institucional (PRI) was in effect the Mexican political system for more than seven decades. Just as the end of the Cold War required a...authoritarian in the sense that one party, the Partido Revolu- cionario Institucional , has monopolized the national political life for six decades. It is

  19. 2nd Quarter Transportation Report FY 2014

    Energy Technology Data Exchange (ETDEWEB)

    Gregory, L.

    2014-07-30

    This report satisfies the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) commitment to prepare a quarterly summary report of radioactive waste shipments to the Nevada National Security Site (NNSS) Radioactive Waste Management Complex (RWMC) at Area 5. There were no shipments sent for offsite treatment and returned to the NNSS this quarter. This report summarizes the second quarter of fiscal year (FY) 2014 low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) shipments. This report also includes annual summaries for FY 2014 in Tables 4 and 5. Tabular summaries are provided which include the following: Sources of and carriers for LLW and MLLW shipments to and from the NNSS; Number and external volume of LLW and MLLW shipments; Highway routes used by carriers; and Incident/accident data applicable to LLW and MLLW shipments. In this report shipments are accounted for upon arrival at the NNSS, while disposal volumes are accounted for upon waste burial. The disposal volumes presented in this report do not include minor volumes of non-radioactive materials that were approved for disposal. Volume reports showing cubic feet (ft3) generated using the Low-Level Waste Information System may vary slightly due to differing rounding conventions.

  20. TRP channels and pain.

    Science.gov (United States)

    Julius, David

    2013-01-01

    Nociception is the process whereby primary afferent nerve fibers of the somatosensory system detect noxious stimuli. Pungent irritants from pepper, mint, and mustard plants have served as powerful pharmacological tools for identifying molecules and mechanisms underlying this initial step of pain sensation. These natural products have revealed three members of the transient receptor potential (TRP) ion channel family--TRPV1, TRPM8, and TRPA1--as molecular detectors of thermal and chemical stimuli that activate sensory neurons to produce acute or persistent pain. Analysis of TRP channel function and expression has validated the existence of nociceptors as a specialized group of somatosensory neurons devoted to the detection of noxious stimuli. These studies are also providing insight into the coding logic of nociception and how specification of nociceptor subtypes underlies behavioral discrimination of noxious thermal, chemical, and mechanical stimuli. Biophysical and pharmacological characterization of these channels has provided the intellectual and technical foundation for developing new classes of analgesic drugs.

  1. Dip coating process. Silicon sheet growth development for the large-area silicon sheet task of the low-cost silicon solar array project. Quarterly report No. 6, March 22, 1977--June 24, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Zook, J.D.; Heaps, J.D.; Maciolek, R.B.; Koepke, B.; Butter, C.D.; Schuldt, S.B.

    1977-06-30

    The objective of this research program is to investigate the technical and economic feasibility of producing solar-cell-quality sheet silicon by coating one surface of carbonized ceramic substrates with a thin layer of large-grain polycrystalline silicon from the melt. Significant progress was made in silicon on ceramic (SOC) solar cell performance. SOC cells having 1 cm/sup 2/ active areas demonstrated measured conversion efficiencies as high as 7.2 percent. Typical open circuit voltages (V/sub oc/) and short circuit current densities (J/sub sc/) were 0.51 volt and 20 mA/cm/sup 2/ respectively. Since the active surface of these solar cells is a highly reflective ''as-grown'' surface, one can expect improvement in J/sub sc/ after an anti-reflection (AR) coating is applied. It is significant that single-crystal comparison cells, also measured without benefit of an AR coating, had efficiencies in the 8.5 percent range with typical V/sub oc/'s and J/sub sc/'s of 0.54 volt and 23 mA/cm/sup 2/, respectively. Therefore, improvement in cell design and junction diffusion techniques should increase the efficiency of both the SOC and single-crystal cells. During this quarter the dip coating facility was inadvertently contaminated, but has since been restored to a purity level exceeding its original state. With this facility, silicon coatings were grown with a single-crystal seed attached to the substrate. Single-crystal silicon was not forthcoming, but the results were nonetheless encouraging. Several of the carbon coating types tried appear promising, including one which has high purity and can be applied uniformly by swab or airbrush.

  2. 20 CFR 404.145 - When you acquire a quarter of coverage.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false When you acquire a quarter of coverage. 404... DISABILITY INSURANCE (1950- ) Insured Status and Quarters of Coverage Quarters of Coverage § 404.145 When you acquire a quarter of coverage. If we credit you with a quarter of coverage (QC) for a calendar...

  3. 20 CFR 404.140 - What is a quarter of coverage.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false What is a quarter of coverage. 404.140... DISABILITY INSURANCE (1950- ) Insured Status and Quarters of Coverage Quarters of Coverage § 404.140 What is a quarter of coverage. (a) General. A quarter of coverage (QC) is the basic unit of social...

  4. Idaho National Laboratory Quarterly Performance Analysis - 1st Quarter FY2015

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Lisbeth A. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-03-01

    This report is published quarterly by the Idaho National Laboratory (INL) Quality and Performance Management Organization. The Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of 73 reportable events (27 from the 1St Qtr FY-15 and 46 from the prior three reporting quarters), as well as 38 other issue reports (including nine not reportable events and Significant Category A and B conditions reported during the1st Qtr FY-15) identified at INL during the past 12 months.

  5. Two-channel imaging system for the White light Active Region Monitor (WARM) telescope at Kodaikanal Observatory: design, development, and first images

    Science.gov (United States)

    Pruthvi, Hemanth; Ramesh, K. B.

    2015-06-01

    One of the three planned back-end systems for the proposed National Large Solar Telescope (NLST) is the Solar Dynamics Imaging System (SDIS) which is intended to obtain near simultaneous images in multiple wavelengths. As a first step, a prototype system with two channel imaging has been developed and installed at the back-end of the White light Active Region Monitor (WARM) telescope at Kodaikanal Observatory. A two-mirror Coelostat serves as a light feeding system to a refracting objective while an optical breadboard serves as a platform for the back-end instruments. A re-imaging system is used before the prime focus to get two light channels for the observations in two wavelengths. The re-imaging system is designed using ZEMAX and the alignment of the system is done using a laser. Full disk images are obtained using a red filter (674.2nm/10nm) and a G-band filter (430.5nm/0.84nm). Design aspects of the re-imaging system, preliminary observations and image reduction methods are described in this paper.

  6. Development of a new feed channel spacer for reverse osmosis elements. Phase 2 final report, October 1, 1994--December 31, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Milstead, C.E.; Riley, R.L.

    1998-02-11

    During Phase 1, computer modeling techniques were used as the prime instrument of evaluation of designs for a new feed channel spacer to replace the 30 mil thick standard mesh (Vexar) spacer currently used in ROWPU [Reverse Osmosis Water Processing Unit] spiral-wound elements. A hemispherical peg model, based on a Bed of Nails concept developed in Phase 1, was selected for prototype production of spiral-wound elements for field testing. Evaluation in the See-Thru test cell to observe pressure drops through the spacer, feed mixing patterns and ease of cleaning fouled membrane samples showed considerable benefit over Vexar. This design would be suitable for production by roll embossing (or rotary punching) methods instead of expensive injection molding techniques. A 10{1/2} inch die set was fabricated to prove this concept using a 12 ton press brake. Due to a number of factors, however, the equipment did not work as anticipated and numerous modifications are currently in progress. This work will continue at no cost to the government until completed. A seawater test system has been constructed for field testing of various commercially available feed channel spacers for comparison with the Vexar spacer.

  7. Applied Meteorology Unit Quarterly Report. First Quarter FY-13

    Science.gov (United States)

    2013-01-01

    The AMU team worked on five tasks for their customers: (1) Ms. Crawford continued work on the objective lightning forecast task for airports in east-central Florida. (2) Ms. Shafer continued work on the task for Vandenberg Air Force Base to create an automated tool that will help forecasters relate pressure gradients to peak wind values. (3) Dr. Huddleston began work to develop a lightning timing forecast tool for the Kennedy Space Center/Cape Canaveral Air Force Station area. (3) Dr. Bauman began work on a severe weather forecast tool focused on east-central Florida. (4) Dr. Watson completed testing high-resolution model configurations for Wallops Flight Facility and the Eastern Range, and wrote the final report containing the AMU's recommendations for model configurations at both ranges.

  8. Applied Meteorology Unit (AMU) Quarterly Report First Quarter FY-14

    Science.gov (United States)

    Bauman, William Henry; Crawford, Winifred C.; Shafer, Jaclyn A.; Watson, Leela R.; Huddleston, Lisa L.; Decker, Ryan K.

    2014-01-01

    NASA's LSP and other programs at Vandenberg Air Force Base (VAFB) use wind forecasts issued by the 30th Operational Support Squadron (30 OSS) to determine if they need to limit activities or protect property such as a launch vehicle due to the occurrence of warning level winds at VAFB in California. The 30 OSS tasked the AMU to provide a wind forecasting capability to improve wind warning forecasts and enhance the safety of their customers' operations. This would allow 30 OSS forecasters to evaluate pressure gradient thresholds between pairs of regional observing stations to help determine the onset and duration of warning category winds. Development of such a tool will require that solid relationships exist between wind speed and the pressure gradient of one or more station pairs. As part of this task, the AMU will also create a statistical climatology of meteorological observations from the VAFB wind towers.

  9. Quarterly coal report July--September 1995, February 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-16

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. The data presented in the QCR are collected and published by the Energy Information Administration (EIA) to fulfill data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275), as amended. This report presents detailed quarterly data for July through September 1995 and aggregated quarterly historical data for 1987 through the second quarter of 1995. Appendix A displays, from 1987 on, detailed quarterly historical coal imports data, as specified in Section 202 of the Energy Policy and Conservation Amendments Act of 1985 (Public Law 99-58). Appendix B gives selected quarterly tables converted to metric tons.

  10. The temporal characteristics of Ca2+ entry through L-type and T-type Ca2+ channels shape exocytosis efficiency in chick auditory hair cells during development.

    Science.gov (United States)

    Levic, Snezana; Dulon, Didier

    2012-12-01

    During development, synaptic exocytosis by cochlear hair cells is first initiated by patterned spontaneous Ca(2+) spikes and, at the onset of hearing, by sound-driven graded depolarizing potentials. The molecular reorganization occurring in the hair cell synaptic machinery during this developmental transition still remains elusive. We characterized the changes in biophysical properties of voltage-gated Ca(2+) currents and exocytosis in developing auditory hair cells of a precocial animal, the domestic chick. We found that immature chick hair cells (embryonic days 10-12) use two types of Ca(2+) currents to control exocytosis: low-voltage-activating, rapidly inactivating (mibefradil sensitive) T-type Ca(2+) currents and high-voltage-activating, noninactivating (nifedipine sensitive) L-type currents. Exocytosis evoked by T-type Ca(2+) current displayed a fast release component (RRP) but lacked the slow sustained release component (SRP), suggesting an inefficient recruitment of distant synaptic vesicles by this transient Ca(2+) current. With maturation, the participation of L-type Ca(2+) currents to exocytosis largely increased, inducing a highly Ca(2+) efficient recruitment of an RRP and an SRP component. Notably, L-type-driven exocytosis in immature hair cells displayed higher Ca(2+) efficiency when triggered by prerecorded native action potentials than by voltage steps, whereas similar efficiency for both protocols was found in mature hair cells. This difference likely reflects a tighter coupling between release sites and Ca(2+) channels in mature hair cells. Overall, our results suggest that the temporal characteristics of Ca(2+) entry through T-type and L-type Ca(2+) channels greatly influence synaptic release by hair cells during cochlear development.

  11. Idaho National Laboratory Quarterly Event Performance Analysis FY 2013 4th Quarter

    Energy Technology Data Exchange (ETDEWEB)

    Lisbeth A. Mitchell

    2013-11-01

    This report is published quarterly by the Idaho National Laboratory (INL) Performance Assurance Organization. The Department of Energy Occurrence Reporting and Processing System (ORPS) as prescribed in DOE Order 232.2 “Occurrence Reporting and Processing of Operations Information” requires a quarterly analysis of events, both reportable and not reportable for the previous twelve months. This report is the analysis of occurrence reports and deficiency reports (including not reportable events) identified at the Idaho National Laboratory (INL) during the period of October 2012 through September 2013.

  12. Idaho National Laboratory Quarterly Performance Analysis - 2nd Quarter FY2014

    Energy Technology Data Exchange (ETDEWEB)

    Lisbeth A. Mitchell

    2014-06-01

    This report is published quarterly by the Idaho National Laboratory (INL) Performance Assurance Organization. The Department of Energy Occurrence Reporting and Processing System (ORPS), as prescribed in DOE Order 232.2, “Occurrence Reporting and Processing of Operations Information,” requires a quarterly analysis of events, both reportable and not reportable, for the previous 12 months. This report is the analysis of occurrence reports and other deficiency reports (including not reportable events) identified at INL from January 2014 through March 2014.

  13. Strategic Studies Quarterly, Volume 4, Number 3, Fall 2010

    Science.gov (United States)

    2010-01-01

    1948-12 May 1949)—perhaps the best- known relief operation in American history—the Air Force provided vital S QUARTER! > • FAU 2010 \\_ •’ I food...and personnel to begin performing at least the first two functions immediately. [28] STRATEGIC STUDIES QUARTERLY • FAU 2010 Guidelines for Nation...assistance, as measured as a share of GDP, than more-settled societies. Whereas most STRATEGIC STUDIES QUARTERLY • FAU 2010 [35] James F. Dobbins

  14. Coal liquefaction. Quarterly report, January--March 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    Current ERDA work in coal liquefaction is aimed at improved process configurations for both catalytic and non-catalytic processes to provide more attractive processing economics and lower capital investment. Coal liquefaction can now be achieved under more moderate processing conditions and more rapidly than was the case in the 1930's. The advantage of coal liquefaction is that the entire range of liquid products, including heavy boiler fuel, distillate fuel oil, gasoline, jet fuel, and diesel oil, can be produced from coal by varying the type of process and operating conditions used in the process. Furthermore, coal-derived liquid fuels also have the potential for use as chemical feedstocks. To determine the most efficient means of utilizing coal resources, ERDA is sponsoring the development of several conversion processes that are currently in the pilot plant stage. Nineteen projects under development are described and progress for each in the quarter is detailed briefly. (LTN)

  15. Channelling, a new immunization strategy.

    Science.gov (United States)

    Gacharna Romero, M G; Silva Pizano, E; Avendano Lamo, J

    1985-01-01

    In 1981, with PAHO/WHO technical assistance, the Ministry of Health, Colombia, designed what is known as the channelling strategy, aimed at improving immunization coverage. This name was given because the strategy is designed to establish communication channels through direct action aimed at promoting health. Health workers and community leaders or guides conduct household visits to identify unvaccinated children or those with incomplete vaccination schedules and "channel" them to health centers or health posts. The channelling strategy developed in Colombia was briefly mentioned in the case study on the Colombian Vaccination Crusade of 1984. It is now being employed for ORT and other PHC components in the Colombian Child Survival and Development Plan, 1985-1987. In the meantime, other countries have adopted the channelling strategy, which is described in this article.

  16. Electric and hybrid vehicle program: Site operator program. Quarterly progress report, April--June, 1994 (3rd quarter of FY-1994)

    Energy Technology Data Exchange (ETDEWEB)

    Kiser, D.M.; Brown, H.L.

    1994-10-01

    The DOE Site Operator Program was initially established to meet the requirements of the Electric and Hybrid Vehicle Research, Development, and Demonstration Act of 1976. The Program has since evolved in response to new legislation and interests. Its mission now includes three major activity categories; advancement of Electric Vehicle (EV) technologies, development of infrastructure elements needed to support significant EV use, and increasing public awareness and acceptance of EVs. The 13 Program participants, their geographic locations, and the principal thrusts of their efforts are identified. The EV inventories of each participant are summarized. This third quarter report (FY-94) will include a summary of activities from the previous three quarters. The report section sequence has been revised to provide a more easily seen program overview, and specific operator activities are now included.

  17. MHD Integrated Topping Cycle Project. Seventeenth quarterly technical progress report, August 1, 1991--October 31, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    This seventeenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period August 1, 1991 to October 31, 1991. Manufacturing of the prototypical combustor pressure shell has been completed including leak, proof, and assembly fit checking. Manufacturing of forty-five cooling panels was also completed including leak, proof, and flow testing. All precombustor internal components (combustion can baffle and swirl box) were received and checked, and integration of the components was initiated. A decision was made regarding the primary and backup designs for the 1A4 channel. The assembly of the channel related prototypical hardware continued. The cathode wall electrical wiring is now complete. The mechanical design of the diffuser has been completed.

  18. Two-dimensional modeling of a polymer electrolyte membrane fuel cell with long flow channel. Part I. Model development

    OpenAIRE

    2015-01-01

    A two-dimensional single-phase model is developed for the steady-state and transient analysis of polymer electrolyte membrane fuel cells (PEMFC). Based on diluted and concentrated solution theories, viscous flow is introduced into a phenomenological multi-component modeling framework in the membrane. Characteristic variables related to the water uptake are discussed. A ButlereVolmer formulation of the current-overpotential relationship is developed based on an elementary mechanism of elect...

  19. Natural gas imports and exports: First quarter report 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The Office of Fuels Programs prepares quarterly reports summarizing the data provided by companies authorized to import or export natural gas. Companies are required, as a condition of their authorizations, to file quarterly reports with the OFP. This quarter`s focus is market penetration of gas imports into New England. Attachments show the following: % takes to maximum firm contract levels and weighted average per unit price for the long-term importers, volumes and prices of gas purchased by long-term importers and exporters, volumes and prices for gas imported on short-term or spot market basis, and gas exported short-term to Canada and Mexico.

  20. On the genetic bias of the quarter of birth instrument.

    Science.gov (United States)

    Rietveld, Cornelius A; Webbink, Dinand

    2016-05-01

    Many studies in economics use quarter of birth as an instrument for identifying the causal effect of schooling on outcomes such as earnings and health. The key assumption in these studies is that people born in different quarters of the year do not differ systematically in their unobserved abilities. This study uses genetic data from the US Health and Retirement Study to analyze the validity of the quarter of birth instrument. We find some evidence that genetic factors influencing education are not randomly distributed over the year. However, these factors only slightly change the effect of quarter of birth on schooling.

  1. Mixed Waste Management Facility groundwater monitoring report: Third quarter 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    Currently, 125 wells monitor groundwater quality in the uppermost aquifer beneath the Mixed Waste Management Facility (MWMF) at the Savannah River Site. Samples from the wells are analyzed for selected heavy metals, herbicides/pesticides, indicator parameters, radionuclides, volatile organic compounds, and other constituents. As in previous quarters, tritium and trichloroethylene were the most widespread elevated constituents during third quarter 1994. Sixty-four (51%) of the 125 monitoring wells contained elevated tritium activities. Trichloroethylene concentrations exceeded the final PDWS in 22 (18%) wells. Chloroethene, 1,1-dichloroethylene, and tetrachloroethylene, elevated in one or more wells during third quarter 1994, also occurred in elevated levels during second quarter 1994. These constituents generally were elevated in the same wells during both quarters. Gross alpha, which was elevated in only one well during second quarter 1994, was elevated again during third quarter. Mercury, which was elevated during first quarter 1994, was elevated again in one well. Dichloromethane was elevated in two wells for the first time in several quarters.

  2. Application of echinoid sperm and embryo bioassays for the pollution assessment of Sao Sebastiao Channel, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Zamboni, A.J. [Cidade Univ., Sao Paulo (Brazil); Nipper, M.G. [NIWA, Hamilton (New Zealand)

    1995-12-31

    The Sao Sebastiao Channel, located on the Southeastern Brazilian coast, encompasses the largest oil terminal in the country and is also a highly touristic area. Frequent oil spills are responsible for chronic contamination problems and sewage disposal in the waters of the channel is also common practice. the water and sediment quality in different sites along Sao Sebastiao Channel was evaluated quarterly throughout a year, by toxicity testing with sperm cells and embryos of the sea urchin Lytechinus variegatus. Water samples were collected from two depths (1 m below surface and 1 m above the bottom). Sediments, collected by a grab sampler, had their pore water extracted by centrifuging. It was then analyzed for toxicity. The results showed that the pore water from most sites impaired sperm viability and embryo development of the test organisms. Sediments were further characterized for particle size distribution, TOC, heavy metals and petroleum hydrocarbons content. They contained baseline concentrations of Cu, Pb, Zn, Ni and Fe, but the hydrocarbons levels were above the average for nearby coastal areas. The overlying water from the deeper layer was of better quality than the surface, but very fast changes were observed along time and space. This seems to be intimately associated with the predominant hydrodynamic and meteorological phenomena in that region. The results showed that these toxicity test methods can be applied in association with other forms of analysis, for the establishment of quality criteria for Brazilian coastal environments.

  3. A multi-channel feedback algorithm for the development of active liners to reduce noise in flow duct applications

    Science.gov (United States)

    Mazeaud, B.; Galland, M.-A.

    2007-10-01

    The present paper deals with the design and development of the active part of a hybrid acoustic treatment combining porous material properties and active control techniques. Such an acoustic system was developed to reduce evolutionary tones in flow duct applications. Attention was particularly focused on the optimization process of the controller part of the hybrid cell. A piezo-electric transducer combining efficiency and compactness was selected as a secondary source. A digital adaptive feedback control algorithm was specially developed in order to operate independently cell by cell, and to facilitate a subsequent increase in the liner surface. An adaptive bandpass filter was used to prevent the development of instabilities due to the coupling occurring between cells. Special care was taken in the development of such systems for time-varying primary signals. An automatic frequency detection loop was therefore introduced in the control algorithm, enabling the continuous adaptation of the bandpass filtering. The multi-cell structure was experimentally validated for a four-cell system located on a duct wall in the presence of flow. Substantial noise reduction was obtained throughout the 0.7-2.5 kHz frequency range, with flow velocities up to 50 m/s.

  4. Lack of transient receptor potential vanilloid 1 channel modulates the development of neurogenic bladder dysfunction induced by cross-sensitization in afferent pathways

    Directory of Open Access Journals (Sweden)

    Lei Qi

    2013-01-01

    Full Text Available Abstract Background Bladder pain of unknown etiology has been associated with co-morbid conditions and functional abnormalities in neighboring pelvic organs. Mechanisms underlying pain co-morbidities include cross-sensitization, which occurs predominantly via convergent neural pathways connecting distinct pelvic organs. Our previous results showed that colonic inflammation caused detrusor instability via activation of transient receptor potential vanilloid 1 (TRPV1 signaling pathways, therefore, we aimed to determine whether neurogenic bladder dysfunction can develop in the absence of TRPV1 receptors. Methods Adult male C57BL/6 wild-type (WT and TRPV1−/− (knockout mice were used in this study. Colonic inflammation was induced by intracolonic trinitrobenzene sulfonic acid (TNBS. The effects of transient colitis on abdominal sensitivity and function of the urinary bladder were evaluated by cystometry, contractility and relaxation of detrusor smooth muscle (DSM in vitro to various stimuli, gene and protein expression of voltage-gated sodium channels in bladder sensory neurons, and pelvic responses to mechanical stimulation. Results Knockout of TRPV1 gene did not eliminate the development of cross-sensitization between the colon and urinary bladder. However, TRPV1−/− mice had prolonged intermicturition interval and increased number of non-voiding contractions at baseline followed by reduced urodynamic responses during active colitis. Contractility of DSM was up-regulated in response to KCl in TRPV1−/− mice with inflamed colon. Application of Rho-kinase inhibitor caused relaxation of DSM in WT but not in TRPV1−/− mice during colonic inflammation. TRPV1−/− mice demonstrated blunted effects of TNBS-induced colitis on expression and function of voltage-gated sodium channels in bladder sensory neurons, and delayed development of abdominal hypersensitivity upon colon-bladder cross-talk in genetically modified animals. Conclusions The

  5. Single-channel kinetics of BK (Slo1 channels

    Directory of Open Access Journals (Sweden)

    Yanyan eGeng

    2015-01-01

    Full Text Available Single-channel kinetics has proven a powerful tool to reveal information about the gating mechanisms that control the opening and closing of ion channels. This introductory review focuses on the gating of large conductance Ca2+- and voltage-activated K+ (BK or Slo1 channels at the single-channel level. It starts with single-channel current records and progresses to presentation and analysis of single-channel data and the development of gating mechanisms in terms of discrete state Markov (DSM models. The DSM models are formulated in terms of the tetrameric modular structure of BK channels, consisting of a central transmembrane pore-gate domain (PGD attached to four surrounding transmembrane voltage sensing domains (VSD and a large intracellular cytosolic domain (CTD, also referred to as the gating ring. The modular structure and data analysis shows that the Ca2+ and voltage dependent gating considered separately can each be approximated by 10-state two-tiered models with 5 closed states on the upper tier and 5 open states on the lower tier. The modular structure and joint Ca2+ and voltage dependent gating are consistent with a 50 state two-tiered model with 25 closed states on the upper tier and 25 open states on the lower tier. Adding an additional tier of brief closed (flicker states to the 10-state or 50-state models improved the description of the gating. For fixed experimental conditions a channel would gate in only a subset of the potential number of states. The detected number of states and the correlations between adjacent interval durations are consistent with the tiered models. The examined models can account for the single-channel kinetics and the bursting behavior of gating. Ca2+ and voltage activate BK channels by predominantly increasing the effective opening rate of the channel with a smaller decrease in the effective closing rate. Ca2+ and depolarization thus activate by mainly destabilizing the closed states.

  6. AMERICAN QUARTER HORSES’ BEHAVIORAL FORMS

    Directory of Open Access Journals (Sweden)

    Iryna Olexandrivna Suprun

    2016-02-01

    Full Text Available The review of basic literary sources is made out of behavior of horse. On the basis of the field researches (visual supervisions after three different aged groups of mares it is built ethograms. An ethogram of behavioral forms among mares was developed. They represent the different forms of mares’ behavior in a dynamics. The reaction of mares of the different age-related and physiology groups on appearance of extraneous objects on a pasture, their activity, hierarchy, socialization is analyzed in groups. Several main studies on equines were reviewed in ethogram. Four objects were placed into the pasture with the mares and foals including a mat, cone, halter, and mounting block. Initial interest of mares in objects was high. Herd mentality highly evident. When one horse spooked at object the whole herd followed. After 5 minutes, majority of mares and foals lose interest in objects. The major general behavior categories observed include: locomotion, comfort, and harem social. Dominance was demonstrated while looking at the objects. Dominance was also demonstrated when a mare wanted to be in a specific place or play with a specific toy, she would pin her ears back, bite, or kick at the other mare. 

  7. Channeling Black Insurgency: Elite Patronage and Professional Social Movement Organizations in the Development of the Black Movement.

    Science.gov (United States)

    Jenkins, J. Craig; Eckert, Craig M.

    1986-01-01

    Critically evaluates the theory of patronage and professional social movement organizations (SMOs) in interpreting the development of black insurgency between 1953 and 1980. Findings support and contradict the social contract theory. Professionalization was only one of many reasons for the movement's decline. (Author/PS)

  8. A technique to improve crystal channeling efficiency of charged particles

    CERN Document Server

    Tikhomirov, V V

    2007-01-01

    It is shown that a narrow plane cut near the crystal surface considerably increases the probability of capture into the stable channeling motion of positively charged particles entering a crystal at angles smaller than a quarter of the critical channeling angle with respect to the crystal planes. At smallest incidence angles the capture probability reaches 99 percent. A pair of crystals bent in orthogonal planes and provided with the cuts allows to reach a 99.9 percent efficiency of single-pass deflection of a proton beam with an ultra small divergence. Conditions necessary for efficient single-pass deflection of protons from the LHC beam halo are also discussed.

  9. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission First Quarter 1984

    Energy Technology Data Exchange (ETDEWEB)

    None

    1984-01-01

    At the end of the First Quarter of 1984, the number of signed contracts and letter agreements for cogeneration and small power production projects was 322, with a total estimated nominal capacity of 2,643 MW. Of these totals, 215 projects, capable of producing 640 MW, are operational. A map indicating the location of operational facilities under contract with PG and E is provided. Developers of cogeneration, solid waste, or biomass projects had signed 110 contracts with a potential of 1,467 MW. In total, 114 contracts and letter agreements had been signed with projects capable of producing 1,508 MW. PG and E also had under active discussion 35 cogeneration projects that could generate a total of 425 MW to 467 MW, and 11 solid waste or biomass projects with a potential of 94 MW to 114 MW. One contract had been signed for a geothermal project, capable of producing 80 MW. There were 7 solar projects with signed contracts and a potential of 37 MW, as well as 5 solar projects under active discussion for 31 MW. Wind farm projects under contract numbered 32, with a generating capability of 848 MW. Also, discussions were being conducted with 18 wind farm projects, totaling 490 MW. There were 101 wind projects of 100 kW or less with signed contracts and a potential of 1 MW, as well as 6 other small wind projects under active discussion. There were 64 hydroelectric projects with signed contracts and a potential of 148 MW, as well as 75 projects under active discussion for 316 MW. In addition, there were 31 hydroelectric projects, with a nominal capacity of 187 MW, that Pg and E was planning to construct.

  10. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission Second Quarter 1983

    Energy Technology Data Exchange (ETDEWEB)

    None

    1983-01-01

    In the Second Quarter of 1983, the number of signed contracts and committed projects rose from 223 to 240, with a total estimated nominal capacity of these projects of 1,449 MW. Of this nominal capacity, about 361 MW is operational, and the balance is under contract for development. A map indicating the location of currently operating facilities is provided as Figure A. Of the 240 signed contracts and committed projects, 75 were cogeneration, solid waste, or biomass projects with a potential of 740 MW. PG and E also had under active discussion 32 cogeneration projects that could generate a total of 858 MW to 921 MW, and 10 solid waste/biomass projects with a potential of 113 MW to 121 MW. Two contracts have been signed with geothermal projects, capable of producing 83 MW. There are 6 solar projects with signed contracts and a potential of 36 MW, as well as another solar project under active discussion for 30 MW. Wind farm projects under contract number 19, with a generating capability of 471 MW. Also, discussions are being conducted with 12 wind farm projects, totaling 273 to 278 MW. There are 89 wind projects of 100 kW or less with signed contracts and a potential of almost 1 MW, as well as 10 other projects under active discussion. There are 47 hydroelectric projects with signed contracts and a potential of 110 MW, as well as 65 projects under active discussion for 175 MW. In addition, there are 30 hydroelectric projects, with a nominal capacity of 291 MW, that PG and E is constructing or planning to construct. Table A displays the above information. In tabular form, in Appendix A, are status reports of the projects as of June 30, 1983.

  11. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission Third Quarter 1983

    Energy Technology Data Exchange (ETDEWEB)

    None

    1983-01-01

    In the Third Quarter of 1983, the number of signed contracts and committed projects rose from 240 to 258, with a total estimated nominal capacity of these projects of 1,547 MW. Of this nominal capacity, about 416 MW is operational, and the balance is under contract for development. A map indicating the location of operational facilities under contract with PG and E is provided. Of the 258 signed contracts and committed projects, 83 were cogeneration, solid waste, or biomass projects with a potential of 779 MW. PG and E also had under active discussion 38 cogeneration projects that could generate a total of 797 MW to 848 MW, and 19 solid waste/biomass projects with a potential of 152 MW to 159 MW. Two contracts have been signed with geothermal projects, capable of producing 83 MW. There are 6 solar projects with signed contracts and a potential of 36 MW, as well as 3 solar projects under active discussion for 31 MW. Wind farm projects under contract number 21, with a generating capability of 528 MW. Also, discussions are being conducted with 17 wind farm projects, totaling 257 to 262 MW. There are 94 wind projects of 100 kW or less with signed contracts and a potential of almost 1 MW, as well as 8 other small wind projects under active discussion. There are 50 hydroelectric projects with signed contracts and a potential of 112 MW, as well as 67 projects under active discussion for 175 MW. In addition, there are 31 hydroelectric projects, with a nominal capacity of 185 MW, that PG and E is planning to construct.

  12. Operation of Finnish nuclear power plants. Quarterly report, 2nd quarter 1997

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1997-12-01

    Quarterly Reports on the operation of Finnish nuclear power plants describe events and observations relating to nuclear and radiation safety which STUK - Radiation and Nuclear Safety Authority considers safety significant. Safety improvements at the plants are also described. The Report also includes a summary of the radiation safety of plant personnel and of the environment and tabulated data on the plants` production and load factors. The Finnish nuclear power plant units were in power operation in the second quarter of 1997, except for the annual maintenance outages of Olkiluoto plant units and the Midsummer outage at Olkiluoto 2 due to reduced demand for electricity. There were also brief interruptions in power operation at the Olkiluoto plant units due to three reactor scrams. All plant units are undergoing long-term test operation at upgraded reactor power level which has been approved by STUK The load factor average of all plant units was 88.7 %. One event in the second quarter of 1997 was classified level 1 on the INES. The event in question was a scram at Olkiluoto 1 which was caused by erroneous opening of switches. Other events in this quarter were level 0. Occupational doses and radioactive releases off-site were below authorized limits. Radioactive substances were measurable in samples collected around the plants in such quantities only as have no bearing on the radiation exposure of the population. (orig.).

  13. Operation of Finnish nuclear power plants. Quarterly report, 3rd quarter 1996

    Energy Technology Data Exchange (ETDEWEB)

    Sillanpaeae, T. [ed.

    1997-02-01

    Quarterly Reports on the operation of Finnish nuclear power plants describe events and observations relating to nuclear and radiation safety which the Finnish Centre for Radiation and Nuclear Safety (STUK) considers safety significant. Safety improvements at the plants are also described. The Report also includes a summary of the radiation safety of plant personnel and of the environment and tabulated data on the plants` production and load factors. In the third quarter of 1996, the Finnish nuclear power plant units were in power operation except for the annual maintenance outages of Loviisa plant units and a shutdown at Olkiluoto 1 to identify and repair malfunctions of a high pressure turbine control valve. The load factor average of all plant units was 77.2%. Events in the third quarter of 1996 were classified level 0 on the International Nuclear Event Scale. Occupational doses and radioactive releases off-site were below authorised limits. Radioactive substances were measurable in samples collected around the plants in such quantities only as have no bearing on the radiation exposure of the population. The names of Teollisuuden Voima Oy`s plant units have changed. Olkiluoto 1 and Olkiluoto 2 now replace the names TVO I and TVO II previously used in quarterly reports. (orig.).

  14. The WSTIAC Quarterly. Volume 9, Number 4

    Science.gov (United States)

    2010-04-28

    elements of command– Major Eric D. Trias Captain Bryan M. Bell US Air Force You have to know the past to understand the present. — Carl Sagan This article is...Quarterly, Volume 9, Number 4 3 INTRODUCTION Carl von Clausewitz defined war as “…an act of violence intended to compel our opponent to fulfill our will...controlled systems. NOTES & REFERENCES ‡ Joint Pub 3-13 provides the doctrinal foundation for the conduct of IO in joint operations. [1] von Clausewitz, Carl

  15. Quarterly coal report, July--September 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-18

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. The data presented in the QCR are collected and published by the Energy Information Administration (EIA) to fulfill data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275), as amended.

  16. Environmental surveillance data report for the third quarter of 1992

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, P.Y.; Cooper, R.C.; Hamilton, L.V.; Hughes, J.F.; Horwedel, B.M.; Loffman, R.S.; Salmons, M.C.; Stevens, M.M.; Valentine, C.K.

    1993-02-01

    The Environmental Surveillance and Protection Section within the Office of Environmental Compliance and Documentation at the Oak Ridge National Laboratory (ORNL) is responsible for the development and implementation of an environmental program to (1) ensure compliance with all federal, state, and Department of Energy (DOE) reporting requirements to quantitatively demonstrate prevention, control, and abatement of environmental pollution; (2) monitor the adequacy of containment and effluent controls; and (3) assess impacts of releases from ORNL facilities on the environment. Environmental monitoring, as defined by the Regulatory Guide, consists of two major activities: effluent monitoring and environmental surveillance. Effluent monitoring is the collection and analysis of samples or measurements of liquid and gaseous effluents. Monthly or quarterly summaries are presented in this report for each medium sampled.

  17. The AMTEX Partnership{trademark}. Fourth quarter FY95 report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The AMTEX Partnership{trademark} is a collaborative research and development program among the US Integrated Textile Industry, the Department of Energy (DOE), the national laboratories, other federal agencies and laboratories, and universities. The goal of AMTEX is to strengthen the competitiveness of this vital industry, thereby preserving and creating US jobs. The operations and program management of the AMTEX Partnership{trademark} is provided by the Program Office. This report is produced by the Program Office on a quarterly basis and provides information on the progress, operations, and project management of the partnership. Progress is reported on the following projects: computer-aided fabric evaluation; cotton biotechnology; demand activated manufacturing architecture; electronic embedded fingerprints; on-line process control for flexible fiber manufacturing; rapid cutting; sensors for agile manufacturing; and textile resource conservation.

  18. Mirror fusion. Quarterly report, April-June 1981

    Energy Technology Data Exchange (ETDEWEB)

    1981-09-11

    The information in each Quarterly is presented in the same sequence as in the Field Work Package Proposal and Authorization System (WPAS) submissions prepared for the U.S. Department of Energy; the main sections are Applied Plasma Physics, Confinement Systems, Development and Technology, and Mirror Fusion Test Facility (Planning and Projects). On occasion, we shall include information pertaining to the LLNL role as Lead Laboratory for the Open Systems Mirror Fusion Program. Each of these sections is introduced by an overall statement of the goals and purposes of the groups reporting in it. As appropriate within each section, statements of the goals of individual programs and projects are followed by articles containing summaries of significant recent activity and descriptive text.

  19. Nb Sputtered Quarter Wave Resonators for the HIE-ISOLDE

    CERN Document Server

    Venturini Delsolaro, W; Delaup, B; D'Elia, A; Jecklin, N M; Kadi, Y; Keppel, G; Lespinasse, D; Maesen, P; Mondino, I; Palmieri, V; Stark, S; Sublet, A R M; Therasse, M

    2013-01-01

    The HIE-ISOLDE superconducting linac will be based on quarter wave resonators (QWRs), made by niobium sputtering on copper. The operating frequency at 4.5 K is 101.28 MHz and the required performance for the high beta cavity is 6 MV/m accelerating field for 10 W maximum power dissipation. These challenging specifications were recently met at CERN at the end of a vigorous development program. The paper reports on the progress of the cavity RF performance with the evolution of the sputtering process; it equally illustrates the parallel R&D which is on-going at CERN and at INFN in the quest for even higher performances.

  20. Coal gasification. Quarterly report, October--December 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-05-01

    A number of the processes for converting coal to gas supported by US DOE have reached the pilot plant stage. Laboratory research is also continuing in order to develop data for verifying the feasibility of the specific process and for supporting the operation of the plant. Responsibility for designing, constructing, and operating these pilot plants is given. The most successful test to date was completed in the pilot plant of the BI-GAS Process. The HYGAS Process pilot plant continued testing with Illinois bituminous coal to acquire data necessary to optimize the design of a commercial demonstration plant using the HYGAS process. The Synthane Process pilot plant continued studies of Illinois No. 6 coal. Other processes discussed are: Agglomerating Burner Process, Liquid Phase Methanation Process, Molten Salt Gasification Process, Advanced Coal Gasification System, and Lo-Btu Gasification of Coal for Electric Power Generation. Each project is described briefly with funding, history, and progress during the quarter. (LTN)

  1. Coal liquefaction. Quarterly report, July--September 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-02-01

    ERDA's program for the conversion of coal to liquid fuels is aimed at improved process configurations for both catalytic and noncatalytic processes to provide more attractive processing economics and lower capital investment. The advantage of coal liquefaction is that the entire range of liquid products, including heavy boiler fuel, distillate fuel oil, gasoline, jet fuel, and diesel oil, can be produced from coal by varying the type of process and operating conditions used in the process. Furthermore, coal-derived liquids also have the potential for use as chemical feedstocks. To provide efficient and practical means of utilizing coal resources, ERDA is sponsoring the development of several conversion processes that are currently in the pilot plant stage. Responsibility for the design, construction, and operation of these facilities is given and progress in the quarter is summarized. Several supporting or complementary projects are described similarly. (LTN)

  2. Littoral steering of deltaic channels

    Science.gov (United States)

    Nienhuis, Jaap H.; Ashton, Andrew D.; Giosan, Liviu

    2016-11-01

    The typically single-threaded channels on wave-influenced deltas show striking differences in their orientations, with some channels oriented into the incoming waves (e.g., Ombrone, Krishna), and others oriented away from the waves (e.g., Godavari, Sao Francisco). Understanding the controls on channel orientation is important as the channel location greatly influences deltaic morphology and sedimentology, both subaerially and subaqueously. Here, we explore channel orientation and consequent feedbacks with local shoreline dynamics using a plan-form numerical model of delta evolution. The model treats fluvial sediment delivery to a wave-dominated coast in two ways: 1) channels are assumed to prograde in a direction perpendicular to the local shoreline orientation and 2) a controlled fraction of littoral sediment transport can bypass the river mouth. Model results suggest that channels migrate downdrift when there is a significant net littoral transport and alongshore transport bypassing of the river mouth is limited. In contrast, river channels tend to orient themselves into the waves when fluvial sediment flux is relatively large, causing the shoreline of the downdrift delta flank to attain the orientation of maximum potential sediment transport for the incoming wave climate. Using model results, we develop a framework to estimate channel orientations for wave-influenced deltas that shows good agreement with natural examples. An increase in fluvial sediment input can cause a channel to reorient itself into incoming waves, behavior observed, for example, in the Ombrone delta in Italy. Our results can inform paleoclimate studies by linking channel orientation to fluvial sediment flux and wave energy. In particular, our approach provides a means to quantify past wave directions, which are notoriously difficult to constrain.

  3. Operation of Finnish nuclear power plants. Quarterly report, 2nd quarter 1999

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1999-12-01

    Quarterly reports on the operation of Finnish NPPs describe events and observations relating to nuclear and radiation safety that the Finnish Radiation and Nuclear Safety Authority (STUK) considers safety significant. Safety improvements at the plants are also described. The report includes a summary of the radiation safety of plant personnel and the environment and tabulated data on the plants' production and load factors. All Finnish NPP units were in power operation for the whole second quarter of 1999, with the exception of the annual maintenance outages of the Olkiluoto plant units. The load factor average of the plant units in this quarter was 93.1%. Two events in this quarter were classified Level 1 on the INKS Scale. At Olkiluoto 1, a valve of the containment gas treatment system had been in an incorrect position for almost a month, owing to which the system would not have been available as planned in an accident. At Olkiluoto 2, main circulation pump work was done during the annual maintenance outage and a containment personnel air lock was briefly open in violation of the Technical Specifications. Water leaking out of the reactor in an accident could not have been directed to the emergency cooling system because it would have leaked out from the containment via the open personnel air lock. Other events in this quarter had no bearing on the nuclear or radiation safety of the plant units. The individual doses of NPP personnel and also radioactive releases off-site were well below authorised limits. Radioactive substances were measurable in samples collected around the plants in such quantities only as have no bearing on the radiation exposure of the population. (orig.)

  4. 渠道冻胀离心模型试验设备的研制%Development of centrifugal model test facility for frost-heave of channels

    Institute of Scientific and Technical Information of China (English)

    黄英豪; 蔡正银; 张晨; 徐光明; 洪建忠; 赵宝忠

    2015-01-01

    Frost-heave damage is the main reason for the channels in seasonal frozen regions. A new device is developed for simulating the frost-heave phenomenon of channels. It mainly includes the freeze-thaw model container, the circulating cooling water system and the measurement control system. The freeze-thaw model container consists of internal and external structures, and thermal insulation materials are filled between them. The circulating cooling water system adopts 12 groups of semiconductor chilling plates, and cooling or heating is accomplished by the Peltier effects. The high-pressure pump combined with the air cooling radiator realizes a continuous cooling for the system without hydraulic rotating joints. The installation device for the direct rebound displacement sensors is developed to ensure the accurate measurement. The whole device is used to study the frost-heave damage of a channel. The test results show a good regularity with correct simulation of both the temperature and displacement fields, indicating that this facility is effective for the simulation tests on frost-heave of channels.%输水渠道冻胀破坏是寒冷地区渠道破坏的主要表现。研制了一套在土工离心机中进行渠道冻胀模拟的试验设备,该设备主要包括冻融模型箱、循环冷却水系统、测量控制系统等组成。冻融模型箱采用内外两层结构,中间填充保温材料。循环冷却水系统采用12组半导体制冷片,利用其帕尔贴效应实现制冷/热。采用高压水泵驱动水流并结合风冷散热器,持续为制冷器循环冷却,实现了在离心机不具备水旋转接头下的循环水利用。开发了直流回弹式位移测量系统的安装装置,保证了测量系统的准确。利用该设备进行了北疆地区输水渠道的冻胀模拟,试验结果规律好,可以正确的模拟冻胀温度场和位移场。渠道冻胀离心模型试验设备的研制为寒冷地区输水渠道冻胀问题

  5. Development and validation of a 64 channel front end ASIC for 3D directional detection with MIMAC

    CERN Document Server

    Richer, J P; Bosson, G; Guillaudin, O; Mayet, F; Santos, D

    2011-01-01

    A front end ASIC has been designed to equip the {\\mu}TPC prototype developed for the MIMAC project, which requires 3D reconstruction of low energy particle tracks in order to perform directional detection of galactic Dark Matter. Each ASIC is able to monitor 64 strips of pixels and provides the "Time Over Threshold" information for each of those. These 64 digital informations, sampled at a rate of 50 MHz, can be transferred at 400MHz by eight LVDS serial links. Eight ASIC were validated on a 2x256 strips of pixels prototype.

  6. Degenerate RFID Channel Modeling for Positioning Applications

    Directory of Open Access Journals (Sweden)

    A. Povalac

    2012-12-01

    Full Text Available This paper introduces the theory of channel modeling for positioning applications in UHF RFID. It explains basic parameters for channel characterization from both the narrowband and wideband point of view. More details are given about ranging and direction finding. Finally, several positioning scenarios are analyzed with developed channel models. All the described models use a degenerate channel, i.e. combined signal propagation from the transmitter to the tag and from the tag to the receiver.

  7. Search for the Higgs boson in the ZH→v$\\bar{v}$b$\\bar{b}$ channel: Development of a b-tagging method based on soft muons

    Energy Technology Data Exchange (ETDEWEB)

    Jamin, David [Univ. of the Mediterranean, Marseille (France)

    2010-09-30

    In the Standard Model of particle physics, the Higgs boson generates elementary particle masses. Current theoretical and experimental constraints lead to a Higgs boson mass between 114.4 and 158 GeV with 95% confidence level. Moreover, Tevatron has recently excluded the mass ranges between 100 and 109 GeV, 158 and 175 GeV with 95% confidence level. These results gives a clear indication to search for a Higgs boson at low mass. The D0 detector is located near Chicago, at the Tevatron, a proton-antiproton collider with an energy in the center of mass of 1.96 TeV. The topic of this thesis is the search for a Higgs boson in association with a Z boson. This channel is sensitive to low mass Higgs boson (<135 GeV) which has a branching ratio H → bb varies between 50% and 90% in this mass range. The decay channel ZH → v$\\bar{v}$b$\\bar{b}$ studied has in the final state 2 heavy-flavor jets and some missing transverse energy due to escaping neutrinos. The heavy-flavor jets identification ('b-tagging') is done with a new algorithm (SLTNN) developed specifically for semi-leptonic decay of b quarks. The Higgs boson search analysis was performed with 3 fb-1 of data. The use of SLTNN increases by 10% the Higgs boson signal efficiency. The global analysis sensitivity improvement, however, is rather low (<1%) after taking into account the backgrounds and systematic uncertainties.

  8. Field-simulation analysis for disposal of liquefaction solid waste. Third quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    1982-08-27

    The tasks to be performed in this study are: (1) review applicable RCRA documents; (2) select waste and site-related parameters of interest; (3) compare and recommend leachate test methods; (4) review predictive simulation models and select one or more for further development; (5) identify required field verification data; and (6) develop a field monitoring program to obtain these data. This report represents the third quarterly progress report and contains the text prepared to date under Task 4.

  9. Northeast regional biomass program. First quarter report, October--December 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-05-01

    This progress report presents summaries of various projects which were in operation or being planned during this quarter period. Projects included testing the efficiency of using wood chips as fuel in heating systems, barriers to commercial development of wood pellet fuels, studies of more efficient and less polluting wood stoves, work on landfill gas utilization, directories of facilities using biomass fuels, surveys of biomass conversion processes to liquid fuels, for commercial development, etc.

  10. A vector of quarters representation for bivariate time series

    NARCIS (Netherlands)

    Ph.H.B.F. Franses (Philip Hans)

    1995-01-01

    textabstractIn this paper it is shown that several models for a bivariate nonstationary quarterly time series are nested in a vector autoregression with cointegration restrictions for the eight annual series of quarterly observations. Or, the Granger Representation Theorem is extended to incorporate

  11. Apprentices & Trainees: Early Trend Estimates. March Quarter, 2012

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2012

    2012-01-01

    This publication presents early estimates of apprentice and trainee commencements for the March quarter 2012. Indicative information about this quarter is presented here; the most recent figures are estimated, taking into account reporting lags that occur at the time of data collection. The early trend estimates are derived from the National…

  12. Apprentices and Trainees: Early Trend Estimates. December Quarter 2010

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2011

    2011-01-01

    This publication presents early estimates of apprentice and trainee commencements for the December quarter 2010. Indicative information about this quarter is presented here; the most recent figures are estimated, taking into account reporting lags that occur at the time of data collection. The early trend estimates are derived from the National…

  13. Apprentices & Trainees: Early Trend Estimates. December Quarter, 2014

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2015

    2015-01-01

    This publication presents early estimates of apprentice and trainee commencements for the December quarter 2014. Indicative information about this quarter is presented here; the most recent figures are estimated, taking into account reporting lags that occur at the time of data collection. The early trend estimates are derived from the National…

  14. Apprentices & Trainees: Early Trend Estimates. March Quarter 2010

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2010

    2010-01-01

    This new publication presents early estimates of apprentice and trainee commencements in the March quarter 2010. Indicative information about the current quarter is presented here in response to the demand for more timely data. The most recent figures are estimated, taking into account reporting lags that occur at the time of data collection. The…

  15. Apprentices & Trainees: Early Trend Estimates. December Quarter, 2012

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2013

    2013-01-01

    This publication presents early estimates of apprentice and trainee commencements for the December quarter 2012. Indicative information about this quarter is presented here; the most recent figures are estimated, taking into account reporting lags that occur at the time of data collection. The early trend estimates are derived from the National…

  16. Apprentices & Trainees: Early Trend Estimates. December Quarter 2011

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2012

    2012-01-01

    This publication presents early estimates of apprentice and trainee commencements for the December quarter 2011. Indicative information about this quarter is presented here; the most recent figures are estimated, taking into account reporting lags that occur at the time of data collection. The early trend estimates are derived from the National…

  17. Apprentices and Trainees: Early Trend Estimates. June Quarter 2010

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2010

    2010-01-01

    This publication presents early estimates of apprentice and trainee commencements for the June quarter 2010. Indicative information about this quarter is presented here; the most recent figures are estimated, taking into account reporting lags that occur at the time of data collection. The early trend estimates are derived from the National…

  18. 77 FR 51705 - Rescission of Quarterly Financial Reporting Requirements

    Science.gov (United States)

    2012-08-27

    ... Financial Reporting Requirements AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION... the quarterly financial reporting requirements for certain for-hire motor carriers of property (Form... notice of proposed rulemaking in the near future proposing the elimination of the quarterly...

  19. Western Gas Sands Project Quarterly Basin Activities Report

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, C H

    1979-04-30

    This quarterly basin activities report is a summation of three months drilling and testing activities in the Greater Green River Basin, Northern Great Plains Province, Piceance Basin, and Uinta Basin. Detailed information is given for each study area for the first quarter of 1979.

  20. Three Oil Giants Achieved Good Operating Performances in First Quarter

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ PetroChina announced performance results PetroChina released its operation data for the first quarter this year on April 15th. A manager in PetroChina said that the increase rate of production of PetroChina in the first quarter this year has created the best level since PetroChina registered in HK in 2000.

  1. Quarterly Technical Progress Report June 2015

    Energy Technology Data Exchange (ETDEWEB)

    Buchholz, Bruce A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-06-08

    The project has two main goals: 1) Identify the types of adducts naphthalene (NA) forms with DNA and 2) determine whether adduct formation correlates with site selective tumor formation in defined subcompartments of the respiratory tract (respiratory and olfactory nasal epithelium and airways of mice, rats and rhesus monkeys). Five tasks are associated with the completion of the goals. Task 1: Contracting and Animal Use Approvals. IACUC and ACURO approvals are complete, The subcontract with UC Davis (UCD) was executed in December 2014. Task 2: Perform In Vitro Study for Goal 1. Rat samples exposed and in freezer while adduct standards are being made. Mouse samples need to be exposed in next quarter. Task 3: Perform In Vitro Study for Goal 2. Mouse ex vivo samples completed. Rat and monkey samples need to be completed in the next quarter. Task 4: Sample Preparation and Analysis. Mouse Goal 2 samples completed. Other samples remain to be done. Task 5: Data Interpretation and Reporting. Need rat data to write paper on adduct formation.

  2. Review of a Proposed Quarterly Coal Publication

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This Review of a Proposed Quartery Coal Publication contains findings and recommendations regarding the content of a new summary Energy Information Administration (EIA) coal and coke publication entitled The Quarterly Coal Review (QCR). It is divided into five sections: results of interviews with selected EIA data users; identification of major functions of the coal and coke industries; analysis of coal and coke data collection activities; evaluation of issues conerning data presentation including recommendations for the content of the proposed QCR; and comparison of the proposed QCR with other EIA publications. Major findings and recommendations are as follows: (1) User interviews indicate a definite need for a compehensive publication that would support analyses and examine economic, supply and demand trends in the coal industry; (2) the organization of the publication should reflect the natural order of activities of the coal and coke industries. Based on an analysis of the industries, these functions are: production, stocks, imports, exports, distribution, and consumption; (3) current EIA coal and coke surveys collect sufficient data to provide a summary of the coal and coke industries on a quarterly basis; (4) coal and coke data should be presented separately. Coke data could be presented as an appendix; (5) three geographic aggregations are recommended in the QCR. These are: US total, coal producing districts, and state; (6) coal consumption data should be consolidated into four major consumer categories: electric utilities, coke plants, other industrial, and residential commercial; (7) several EIA publications could be eliminated by the proposed QCR.

  3. [Geothermal system temperature-depth database and model for data analysis]. 5. quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Blackwell, D.D.

    1998-04-25

    During this first quarter of the second year of the contract activity has involved several different tasks. The author has continued to work on three tasks most intensively during this quarter: the task of implementing the data base for geothermal system temperature-depth, the maintenance of the WWW site with the heat flow and gradient data base, and finally the development of a modeling capability for analysis of the geothermal system exploration data. The author has completed the task of developing a data base template for geothermal system temperature-depth data that can be used in conjunction with the regional data base that he had already developed and is now implementing it. Progress is described.

  4. SUSTAINABILITY OF «FRAMEWORK» AND «FABRIC» OF HISTORIC QUARTERS IN THE CASE OF EKATERINBURG CITY

    Directory of Open Access Journals (Sweden)

    Арина Вениаминовна Лейзерова

    2016-11-01

    Full Text Available The article deals with the features of urban area sustainable development using the case of Ekaterinburg city. Preserving historical and cultural heritage is considered to be one of the main aspects towards the modernization of urban environment under the policy of sustainable urban development. The article analyzes urban fabric of the historic center, elements of “framework”, «fabric» and «plasma» of the quarters in question. Factors influencing the sustainability of architectural and planning structure of historic quarters of Ekaterinburg city are identified as well.

  5. CONSIDERATIONS FOR THE DEVELOPMENT OF A DEVICE FORTHE DECOMMISSIONING OF THE FUEL CHANNELS IN THECANDU NUCLEAR REACTOR

    Directory of Open Access Journals (Sweden)

    Gabi ROSCA FARTAT

    2013-05-01

    Full Text Available As many nuclear power plants are reaching their end of lifecycle, the decommissioning of theseinstallations has become one of the 21stcentury’s great challenges. Each project may be managed differently,depending on the country, development policies, financial considerations, and the availability of qualifiedengineers or specialized companies to handle such projects. The principle objective of decommissioning is toplace a facility into such a condition that there is no unacceptable risk from the decommissioned facility topublic health and safety of the environment. In order to ensure that at the end of its life the risk from a facility iswithin acceptable bounds, action is normally required. The overall decommissioning strategy is todeliver a timely, cost-effective program while maintaining high standards of safety, security and environmentalprotection. If facilities were not decommissioned, they could degrade and potentially present an environmentalradiological hazard in the future. Simply abandoning or leaving a facility after ceasing operations is notconsidered to be an acceptable alternative to decommissioning. The final aim of decommissioning is torecover the geographic site to its original condition.

  6. DOE performance indicators for 2nd quarter CY 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    The Department of Energy (DOE) has established a Department-wide Performance Indicator (PI) Program for trending and analysis of operational data as directed by DOE Order 5480.26. The PI Program was established to provide a means for monitoring the environment, safety, and health (ES&H) performance of the DOE at the Secretary and other management levels. This is the tenth in a series of quarterly reports generated for the Department of Energy Idaho Operations Office (DOE-ID) by EG&G Idaho, Inc. to meet the requirements of the PI Program as directed by the DOE Standard (DOE-STD-1048-92). The information in this tenth quarterly report, while contributing to a historical database for supporting future trending analysis, does not at this time provide a sound basis for developing trend-related conclusions. In the future, it is expected that trending and analysis of operational data will enhance the safety culture in both DOE and contractor organizations by providing an early warning of deteriorating environment, safety, and health conditions. DOE-STD-1048-92 identifies four general areas of PIs. They are: Personnel Safety, Operational Incidents, Environment, and Management. These four areas have been subdivided into 26 performance indicators. Approximately 115 performance indicator control and distribution charts comprise the body of this report. A brief summary of PIs contained in each of these general areas is provided. The four EG&G facilities whose performance is charted herein are as follows: (1) The Advanced Test Reactor (ATR), (2) The Radioactive Waste Management Complex (RWMC), (3) The Waste Experimental Reduction Facility (WERF), and (4) The Test Reactor Area (TRA) Hot Cells.

  7. Ion channels in neuronal survival

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The study of ion channels represents one of the most active fields in neuroscience research in China.In the last 10 years,active research in various Chinese neuroscience institutions has sought to understand the mechanisms responsible for sensory processing,neural development and neurogenesis,neural plasticity,as well as pathogenesis.In addition,extensive studies have been directed to measure ion channel activity,structure-function relationships,as well as many other biophysical and biochemical properties.This review focuses on the progress achieved in the investigation of ion channels in neuronal survival during the past 10 years in China.

  8. Differential expression of K4-AP currents and Kv3.1 potassium channel transcripts in cortical neurons that develop distinct firing phenotypes.

    Science.gov (United States)

    Massengill, J L; Smith, M A; Son, D I; O'Dowd, D K

    1997-05-01

    Maturation of electrical excitability during early postnatal development is critical to formation of functional neural circuitry in the mammalian neocortex. Little is known, however, about the changes in gene expression underlying the development of firing properties that characterize different classes of cortical neurons. Here we describe the development of cortical neurons with two distinct firing phenotypes, regular-spiking (RS) and fast-spiking (FS), that appear to emerge from a population of immature multiple-spiking (IMS) neurons during the first two postnatal weeks, both in vivo (within layer IV) and in vitro. We report the expression of a slowly inactivating, 4-AP-sensitive potassium current (K4-AP) at significantly higher density in FS compared with RS neurons. The same current is expressed at intermediate levels in IMS neurons. The kinetic, voltage-dependent, and pharmacological properties of the K4-AP current are similar to those observed by heterologous expression of Kv3.1 potassium channel mRNA. Single-cell RT-PCR analysis demonstrates that PCR products representing Kv3.1 transcripts are amplified more frequently from FS than RS neurons, with an intermediate frequency of Kv3.1 detection in neurons with immature firing properties. Taken together, these data suggest that the Kv3.1 gene encodes the K4-AP current and that expression of this gene is regulated in a cell-specific manner during development. Analysis of the effects of 4-AP on firing properties suggests that the K4-AP current is important for rapid action potential repolarization, fast after-hyperpolarization, brief refractory period, and high firing frequency characteristic of FS GABAergic interneurons.

  9. Lawrence Livermore National Laboratory Safeguards and Security quarterly progress report to the US Department of Energy: Quarter ending December 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Davis, G.; Mansur, D.L.; Ruhter, W.D.; Steele, E.; Strait, R.S.

    1994-01-01

    The Lawrence Livermore National Laboratory (LLNL) carries out safeguards and security activities for the Department of Energy (DOE), Office of Safeguards and Security (OSS), as well as other organizations, both within and outside the DOE. This document summarizes the activities conducted for the OSS during the first quarter of fiscal year 1994 (October through December, 1993). The nature and scope of the activities carried out for OSS at LLNL require a broad base of technical expertise. To assure projects are staffed and executed effectively, projects are conducted by the organization at LLNL best able to supply the needed technical expertise. These projects are developed and managed by senior program managers. Institutional oversight and coordination is provided through the LLNL Deputy Director`s office. At present, the Laboratory is supporting OSS in five areas: (1) Safeguards Technology, (2) Safeguards and Decision Support, (3) Computer Security, (4) DOE Automated Physical Security, and (5) DOE Automated Visitor Access Control System. This report describes the activities in each of these five areas. The information provided includes an introduction which briefly describes the activity, summary of major accomplishments, task descriptions with quarterly progress, summaries of milestones and deliverables and publications published this quarter.

  10. Lawrence Livermore National Laboratory safeguards and security quarterly progress report to the U.S. Department of Energy. Quarter ending December 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Davis, G.; Mansur, D.L.; Ruhter, W.D.; Strauch, M.S.

    1997-01-01

    The Lawrence Livermore National Laboratory (LLNL) carries out safeguards and security activities for the Department of Energy (DOE), Office of Safeguards and Security (OSS), as well as other organizations, both within and outside the DOE. This document summarizes the activities conducted for the OSS during the First Quarter of Fiscal Year 1997 (October through December, 1996). The nature and scope of the activities carried out for OSS at LLNL require a broad base of technical expertise. To assure projects are staffed and executed effectively, projects are conducted by the organization at LLNL best able to supply the needed technical expertise. These projects are developed and managed by senior program managers. Institutional oversight and coordination is provided through the LLNL Deputy Director`s office. At present, the Laboratory is supporting OSS in four areas: (1) safeguards technology; (2) safeguards and material accountability; (3) computer security--distributed systems; and (4) physical and personnel security support. The remainder of this report describes the activities in each of these four areas. The information provided includes an introduction which briefly describes the activity, summary of major accomplishments, task descriptions with quarterly progress, summaries of milestones and deliverables and publications published this quarter.

  11. Lawrence Livermore National Laboratory safeguards and security quarterly progress report to the US Department of Energy: Quarter ending September 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Ruhter, W.D.; Strait, R.S.; Mansur, D.L.; Davis, G.

    1993-10-01

    The Lawrence Livermore National Laboratory (LLNL) carries out safeguards and security activities for the Department of Energy (DOE), Office of Safeguards and Security (OSS), as well as other organizations, both within and outside the DOE. This document summarizes the activities conducted for the OSS during the fourth quarter of Fiscal Year 1993 (July through September, 1993). The nature and scope of the activities carried out for OSS at LLNL require a broad base of technical expertise. To assure projects are staffed and executed effectively, projects are conducted by the organization at LLNL best able to supply the needed technical expertise. These projects are developed and managed by senior program managers. Institutional oversight and coordination is provided through the LLNL Deputy Director`s office. At present, the Laboratory is supporting OSS in five areas: Safeguards Technology, Safeguard System Studies, Computer Security, DOE Automated Physical Security and DOE Automated Visitor Access Control System. The remainder of this report describes the activities in each of these five areas. The information provided includes an introduction which briefly describes the activity, summary of major accomplishments, task descriptions with quarterly progress, summaries of milestones and deliverables and publications published this quarter.

  12. Dynamic changes of mechanically activated channels and K~+ channels at injury site of peripheral nerve in rat

    Institute of Scientific and Technical Information of China (English)

    凌琰; 谢益宽

    1996-01-01

    Ectopic ion channels developed locally at the injury site after nerve damage by light ligation around common sciatic nerve of the rats. Different channel types have different processes of formation, accumulation and degeneration. During the first three days after injury, mechanically activated channels that are modulated by Ca++ channel activities first appeared. As the nerve fibers begin to be excited by TEA, a blocker of K+ channels, suggesting that the accumulation of K+ channels, the responsibility of mechanically activated channels was declining. Onset of K+ channels was from the 3rd postoperative day and lasted up to the fiftieth day. This time course of K+ channel development was closely related to allodynia and hyperalgesia of neuropathic animal behaviour. The results suggest that chronic contraction injury induces a dynamic change in the ectopic mechanically activated channels and K+ channels at the injury site of nerve and there is an interchange in the development time courses of the mechanic

  13. NEAMS Update. Quarterly Report for October - December 2011.

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, K. (Nuclear Engineering Division)

    2012-02-16

    The Advanced Modeling and Simulation Office within the DOE Office of Nuclear Energy (NE) has been charged with revolutionizing the design tools used to build nuclear power plants during the next 10 years. To accomplish this, the DOE has brought together the national laboratories, U.S. universities, and the nuclear energy industry to establish the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program. The mission of NEAMS is to modernize computer modeling of nuclear energy systems and improve the fidelity and validity of modeling results using contemporary software environments and high-performance computers. NEAMS will create a set of engineering-level codes aimed at designing and analyzing the performance and safety of nuclear power plants and reactor fuels. The truly predictive nature of these codes will be achieved by modeling the governing phenomena at the spatial and temporal scales that dominate the behavior. These codes will be executed within a simulation environment that orchestrates code integration with respect to spatial meshing, computational resources, and execution to give the user a common 'look and feel' for setting up problems and displaying results. NEAMS is building upon a suite of existing simulation tools, including those developed by the federal Scientific Discovery through Advanced Computing and Advanced Simulation and Computing programs. NEAMS also draws upon existing simulation tools for materials and nuclear systems, although many of these are limited in terms of scale, applicability, and portability (their ability to be integrated into contemporary software and hardware architectures). NEAMS investments have directly and indirectly supported additional NE research and development programs, including those devoted to waste repositories, safeguarded separations systems, and long-term storage of used nuclear fuel. NEAMS is organized into two broad efforts, each comprising four elements. The quarterly highlights October

  14. Development of automated welding processes for field fabrication of thick-walled pressure vessel: electron beam method. Third quarterly report, April 1--June 30, 1978. [2 1/4 Cr--1 Mo steel

    Energy Technology Data Exchange (ETDEWEB)

    Weber, C.M.

    1978-01-01

    An electron beam welding procedure is being developed for welding 8 in. thick SA 387 Grade 22 Class 2 (2/sup 1///sub 4/ Cr--1 Mo) steel. Work is in progress for developing 4/sup 1///sub 2/ inch deep partial penetration electron beam welding procedures. A total of 95 welds has been made to date in the horizontal position. A welding procedure which produces a defect-free weld has not been developed to date.

  15. ``Just Another Distribution Channel?''

    Science.gov (United States)

    Lemstra, Wolter; de Leeuw, Gerd-Jan; van de Kar, Els; Brand, Paul

    The telecommunications-centric business model of mobile operators is under attack due to technological convergence in the communication and content industries. This has resulted in a plethora of academic contributions on the design of new business models and service platform architectures. However, a discussion of the challenges that operators are facing in adopting these models is lacking. We assess these challenges by considering the mobile network as part of the value system of the content industry. We will argue that from the perspective of a content provider the mobile network is ‘just another’ distribution channel. Strategic options available for the mobile communication operators are to deliver an excellent distribution channel for content delivery or to move upwards in the value chain by becoming a content aggregator. To become a mobile content aggregator operators will have to develop or acquire complementary resources and capabilities. Whether this strategic option is sustainable remains open.

  16. Coal gasification. Quarterly report, July--September 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-02-01

    The conversion of coal to high-Btu gas requires a chemical and physical transformation of solid coal. However, because coal has widely differing chemical and physical properties, depending on where it is mined, it is difficult to process. Therefore, to develop the most suitable techniques for gasifying coal, ERDA, together with the American Gas Association, is sponsoring the development of several advanced conversion processes. Although the basic coal-gasification chemical reactions are the same for each process, the processes under development have unique characteristics. There are, for example, important differences in reactor configurations and methods of supplying heat for gasification. Moreover, because these processes require high temperatures and some require high pressures, temperature-resistant alloys and new pressure vessels must be developed to obtain reliable performance. A number of the processes for converting coal to high-Btu and to low-Btu gas have reached the pilot plant stage. The responsibility for designing, constructing and operating each of these pilot plants is defined and progress on each during the quarter is described briefly. The accumulation of data for a coal gasification manual and the development of mathematical models of coal gasification processes are reported briefly. (LTN)

  17. Operation of Finnish nuclear power plants. Quarterly report 3rd quarter, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1995-03-01

    Quarterly Reports on the operation of Finnish nuclear power plants describe nuclear and radiation safety related events and observations which the Finnish Centre for Radiation and Nuclear Safety (STUK) considers safety significant. Safety improvements at the plants and general matters relating to the use of nuclear energy are also reported. A summary of the radiation safety of plant personnel and of the environment, and tabulated data on the plants` production and load factors are also given. (4 figs., 4 tabs.).

  18. K-user Interference Channels: General Outer Bound and Sum-capacity for Certain Gaussian Channels

    CERN Document Server

    Tuninetti, Daniela

    2011-01-01

    This paper derives an outer bound on the capacity region of a general memoryless interference channel with an arbitrary number of users. The derivation follows from a generalization of the techniques developed by Kramer and by Etkin et al for the Gaussian two-user channel. The derived bound is the first known outer bound valid for any memoryless channel. In Gaussian noise, classes of channels for which the proposed bound gives the sum-rate capacity are identified, including degraded channels and a class of Z-channels.

  19. Cogeneration and Small Power Production Quarterly Report to the California Public Utilities Commission. Second Quarter 1984

    Energy Technology Data Exchange (ETDEWEB)

    None

    1984-01-01

    At the end of the Second Quarter of 1984, the number of signed contracts and letter agreements for cogeneration and small power production projects was 334, with total estimated nominal capacity of 2,876 MW. Of these totals, 232 projects, capable of producing 678 MW, are operational (Table A). A map indicating the location of operational facilities under contract with PG and E is provided as Figure A. Developers of cogeneration projects had signed 80 contracts with a potential of 1,161 MW. Thirty-three contracts had been signed for solid waste/biomass projects for a total of 298 MW. In total, 118 contracts and letter agreements had been signed with cogeneration, solid waste, and biomass projects capable of producing 1,545 MW. PG and E also had under active discussion 46 cogeneration projects that could generate a total of 688 MW to 770 MW, and 13 solid waste or biomass projects with a potential of 119 MW to 139 MW. One contract had been signed for a geothermal project, capable of producing 80 MW. Two geothermal projects were under active discussion for a total of 2 MW. There were 8 solar projects with signed contracts and a potential of 37 MW, as well as 4 solar projects under active discussion for 31 MW. Wind farm projects under contract numbered 34, with a generating capability of 1,042 MW, Also, discussions were being conducted with 23 wind farm projects, totaling 597 MW. There were 100 wind projects of 100 kW or less with signed contracts and a potential of 1 MW, as well as 7 other small wind projects under active discussion. There were 71 hydroelectric projects with signed contracts and a potential of 151 MW, as well as 76 projects under active discussion for 505 MW. In addition, there were 18 hydroelectric projects, with a nominal capacity of 193 MW, that PG and E was planning to construct. Table B displays the above information. Appendix A displays in tabular form the status reports of the projects as of June 30, 1984.

  20. Functional proteins involved in regulation of intracellular Ca(2+) for drug development: chronic nicotine treatment upregulates L-type high voltage-gated calcium channels.

    Science.gov (United States)

    Katsura, Masashi; Ohkuma, Seitaro

    2005-03-01

    Neurochemical mechanisms underlying drug dependence and withdrawal syndrome remain unclear. In this review, we discuss how chronic nicotine exposure to neurons affects expression of diazepam binding inhibitor (DBI), an endogenous anxiogenic neuropeptide supposed to be a common substance participating drug dependence, and function of L-type high voltage-gated Ca(2+) channels (HVCCs). We also discuss the functional interaction between DBI and L-type HVCCs in nicotine dependence. Both DBI levels and [(45)Ca(2+)] influx significantly increased in the brain from mice treated with nicotine for long term, which was further enhanced after abrupt cessation of nicotine and was abolished by nicotinic acetylcholine receptor (nAChR) antagonists. Similar responses of DBI expression and L-type HVCC function were observed in cerebral cortical neurons after sustained exposure to nicotine. In addition, increased DBI expression was inhibited by antagonists of nAChR and L-type HVCCs. Sustained exposure of neurons to nicotine significantly enhanced expression of alpha(1) and alpha(2)/delta(1) subunits for L-type HVCCs and caused an increase in the B(max) value of [(3)H]verapamil binding to the particulate fractions. Therefore, it is concluded that the alterations in DBI expression is mediated via increased influx of Ca(2+) through upregulated L-type HVCCs and these neurochemical changes have a close relationship with development of nicotine dependence and/or its withdrawal syndrome.