WorldWideScience

Sample records for change control board

  1. Program Baseline Change Control Board charter

    International Nuclear Information System (INIS)

    1993-02-01

    The purpose of this Charter is to establish the Program Baseline Change Control Board (PBCCB) for the Office of Civilian Radioactive Waste Management (OCRWM) Program, and to describe its organization, responsibilities, and basic methods of operation. Guidance for implementing this Charter is provided by the OCRWM Baseline Management Plan (BMP) and OCRWM Program Baseline Change Control Procedure

  2. Atomic Energy Control Board

    International Nuclear Information System (INIS)

    Blackman, N.S.; Gummer, W.K.

    1982-02-01

    This paper has been prepared to provide an overview of the responsibilities and activities of the Atomic Energy Control Board. It is designed to address questions that are often asked concerning the establishment of the Atomic Energy Control Board, its enabling legislation, licensing and compliance activities, federal-provincial relationships, international obligations, and communications with the public

  3. A New Standing Posture Detector to Enable People with Multiple Disabilities to Control Environmental Stimulation by Changing Their Standing Posture through a Commercial Wii Balance Board

    Science.gov (United States)

    Shih, Ching-Hsiang; Shih, Ching-Tien; Chiang, Ming-Shan

    2010-01-01

    This study assessed whether two persons with multiple disabilities would be able to control environmental stimulation using body swing (changing standing posture) and a Wii Balance Board with a newly developed standing posture detection program (i.e. a new software program turns a Wii Balance Board into a precise standing posture detector). The…

  4. CONTROL ENGINEERING ON BOARD

    Directory of Open Access Journals (Sweden)

    Serghei RADU

    2012-11-01

    Full Text Available Control engineering embraces instrumentation, alarm systems, control of machinery and plant previously known under the misnomer of automation. Control engineering can be applied not only to propelling and auxiliary machinery but also to electrical installations, refrigeration, cargo handling (especially in tankers and deck machinery, e.g. Windlass control. Opinion still vary on such matters as the relative merits of pneumatic versus electronic system and whether the control center should be in the engine room or adjacent to the navigating bridge. Arguments against the exclusion of the engineer officer from close contact with the machinery are countered by the fact that electronic systems are based on changes other than those of human response. Automated ships (UMS operate closer to prescribed standards and therefore operate with greater efficiency. The closer control of machinery operating conditions, e.g. cooling water temperatures and pressures, permits machinery to be run at its optimum design conditions, making for fuel economy and reduced maintenance. Automation can carry out some tasks far more effectively than men. In other areas it is less effective. For example, the monitoring of machinery operating conditions such as the temperatures and pressures can be carried out by a solid state alarm scanning system at the rate of 400 channels/sec., giving a degree of surveillance which would be impossible by human observation. Conversely, the detection of noisy bearing, a leaky gland or cracked pipe is scarcely possible by automatic means. The balance between the possible and the necessary would be achieved in this case by combining automatic monitoring of all the likely fault conditions, with routine machinery space inspection say twice a day.

  5. Controlling electronics boards with PVSS

    CERN Document Server

    Jacobsson, Richard

    2005-01-01

    This paper addresses several aspects of implementing a control system for electronics boards in order to perform remote Field Programmable Gate Array (FPGA) programming, hardware configuration, register control, and monitoring, as well as interfacing it to an expert system. The paper presents an implementation, using the Distributed Information Management (DIM) package and the industrial SCADA system PVSS II from ETM, in which the access mechanisms to the board resources are completely generic and in which the device prescription and the handling of mapping between functional parameters and physical registers follow a common structure independent of the board type. The control system also incorporates mechanisms by which it may be controlled from a finite state machine based expert system. Finally the paper suggests an improvement in which the mapping between logical parameters and physical registers is represented by descriptors in the device description such that the translation can be handled by a common m...

  6. The Atomic Energy Control Board

    International Nuclear Information System (INIS)

    Doern, G.B.

    1976-01-01

    This study describes and assesses the regulatory and administrative processes and procedures of the Atomic Energy Control Board, the AECB. The Atomic Energy Control Act authorized the AECB to control atomic energy materials and equipment in the national interest and to participate in measures for the international control of atomic energy. The AECB is authorized to make regulations to control atomic energy materials and equipment and to make grants in support of atomic energy research. (author)

  7. The Atomic Energy Control Board

    International Nuclear Information System (INIS)

    Shultz, R.J.

    1980-01-01

    Certain aspects of the Atomic Energy Control Board's relationships with Cabinet, the Minister, Government officials, The licensees and the public are analyzed. The way some of the relationships would have been modified by the Nuclear Control and Administration Act proposed in 1977 is examined. (L.L.)

  8. Embedded controllers for local board-control

    CERN Document Server

    Neufeld, Niko; Mini, Giuseppe; Sannino, Mario; Guzik, Zbigniew; Jacobsson, Richard; Jost, Beat

    2005-01-01

    The LHCb experiment at CERN has a large number of custom electronic boards performing high-speed data-processing. Like in any large experiment the control and monitoring of these crate-mounted boards must be integrated into the overall control-system. Traditionally this has been done by using buses like VME on the back-plane of the crates. LHCb has chosen to equip every board with an embedded micro-controller and connecting them in a large Local Area Network. The intelligence of these devices allows complex (soft) real-time control and monitoring, required for modern powerful FPGA driven electronics. Moreover each board has its own, isolated control access path, which increases the robustness of the entire system. The system is now in pre-production at several sites and will go into full production during next year. The hardware and software will be discussed and experiences from the R&D and pre-production will be reviewed, with an emphasis on advantages and difficulties of this approach to board-control.

  9. The Editorial Board is Changing

    Directory of Open Access Journals (Sweden)

    LE Nicolle

    2005-01-01

    Full Text Available The success of The Canadian Journal of Infectious Diseases & Medical Microbiology over the past 16 years is largely attributable to the continuing and substantial support from a dedicated and enthusiastic Editorial Board. The individuals who have participated are listed on the masthead in each issue of the Journal. Many of the current Editorial Board members have participated continually since the initiation of the Journal - a commitment of over 16 years. They have provided oversight as the Journal has evolved, and their critical insights in the discussion of issues as they have developed, as well as their suggestions for new directions, have significantly contributed to the maintenance of Journal quality. Our associate editors have been particularly active. They have coordinated and, frequently, developed much of the content for the special sections - adult and paediatric infectious disease notes, clinical vignettes and reviews. They have also facilitated the peer review of submitted manuscripts by identifying reviewers and making recommendations for revisions and publication. These contributions have been essential to the continuing operation and high, scientific quality of the Journal.

  10. New trends in designing NPP control boards

    International Nuclear Information System (INIS)

    Kondrat'ev, V.V.

    1981-01-01

    A short analytical summary of the latest developments and future trends in designing NPP control boards is given. The designs of the Westinghause and the Hynkley-Point NPP control boards are described in detail. The essence of the advanced control board concept consists , firstly, in expanded use of computer-controlled displays for the sake of reducing the content of unimportant information presented to an operator, and, secondary, in better account of human possibilities to convert the NPP operation information into a more suitable form. An enlarged use of the direct digital reactor control utilizing microprocessors is expected. Besides, the employment of full-scale control board mock-ups and information desks as well as testing newly-developed control boards at computer reactor simulators are concluded to be used at all-growing rate [ru

  11. Hospital board structure: changing form and changing issues.

    Science.gov (United States)

    Tregoning, S

    2000-01-01

    Economic and social pressures are compelling many hospitals to consider their current board structure in an effort to position their hospital to meet changing demands. A national profile of the structures of hospital boards has been compiled from a questionnaire completed by hospital board representatives from both government and non-government sectors. Results show that hospital board structures are a hybrid of both philanthropic and corporate models. New structures may be required to meet future challenges. In developing new structures, consideration should be given to identifying the skills and processes required to undertake board business.

  12. American Board of Orthodontics: Time for change.

    Science.gov (United States)

    Chung, Chun-Hsi; Tadlock, Larry P; Barone, Nicholas; Pangrazio-Kulbersh, Valmy; Sabott, David G; Foley, Patrick F; Trulove, Timothy S; Park, Jae Hyun; Dugoni, Steven A

    2018-03-01

    The American Board of Orthodontics (ABO) works to certify orthodontists in a fair, reliable, and valid manner. The process must examine an orthodontist's knowledge, abilities, and critical thinking skills to ensure that each certified orthodontist has the expertise to provide the highest level of patient care. Many medical specialty boards and 4 American Dental Association specialty boards use scenario-based testing for board certification. Changing to a scenario-based clinical examination will allow the ABO to test more orthodontists. The new process will not result in an easier examination; standards will not be lowered. It will offer an improved testing method that will be fair, valid, and reliable for the specialty of orthodontics while increasing accessibility and complementing residency curricula. The ABO's written examination will remain as it is. Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  13. Controlling Electronics Boards with PVS

    CERN Multimedia

    2005-01-01

    - Introduction - Control System Architecture - Device Description - FPGA Programming - Register Control - Data Subscription - Examples of Graphics User Interfaces - Parameter - Register Translation - Application on the LHCb Timing Fast Control System

  14. Leading Change: How Boards and Presidents Build Exceptional Academic Institutions

    Science.gov (United States)

    MacTaggart, Terrence

    2011-01-01

    In a time of transformation in higher education, "Leading Change: How Boards and Presidents Build Exceptional Institutions" fills a significant void in leadership literature and focuses on the changing level of board engagement. This book examines 18 institutions, across the spectrum of higher education, at which the board played a…

  15. Pilot study comparing changes in postural control after training using a video game balance board program and 2 standard activity-based balance intervention programs.

    Science.gov (United States)

    Pluchino, Alessandra; Lee, Sae Yong; Asfour, Shihab; Roos, Bernard A; Signorile, Joseph F

    2012-07-01

    To compare the impacts of Tai Chi, a standard balance exercise program, and a video game balance board program on postural control and perceived falls risk. Randomized controlled trial. Research laboratory. Independent seniors (N=40; 72.5±8.40) began the training, 27 completed. Tai Chi, a standard balance exercise program, and a video game balance board program. The following were used as measures: Timed Up & Go, One-Leg Stance, functional reach, Tinetti Performance Oriented Mobility Assessment, force plate center of pressure (COP) and time to boundary, dynamic posturography (DP), Falls Risk for Older People-Community Setting, and Falls Efficacy Scale. No significant differences were seen between groups for any outcome measures at baseline, nor were significant time or group × time differences for any field test or questionnaire. No group × time differences were seen for any COP measures; however, significant time differences were seen for total COP, 3 of 4 anterior/posterior displacement and both velocity, and 1 displacement and 1 velocity medial/lateral measure across time for the entire sample. For DP, significant improvements in the overall score (dynamic movement analysis score), and in 2 of the 3 linear and angular measures were seen for the sample. The video game balance board program, which can be performed at home, was as effective as Tai Chi and the standard balance exercise program in improving postural control and balance dictated by the force plate postural sway and DP measures. This finding may have implications for exercise adherence because the at-home nature of the intervention eliminates many obstacles to exercise training. Copyright © 2012 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  16. Atomic energy control board. History backgrounder

    International Nuclear Information System (INIS)

    1986-10-01

    The Atomic Energy Control Board (AECB) is a regulatory agency set up by the Government of Canada under the Atomic Energy Control Act of 1946 to assist the Government in its efforts to make provision for the control and supervision of the development, application and use of atomic energy and to enable Canada to participate effectively in measures of international control of atomic energy. It is also responsible for the administration of the Nuclear Liability Act, including the designation of nuclear installations and the prescription of basic insurance to be carried by the operators of such nuclear installations. An overview is presented of the AECB's evolution in chronological form, its major current activities, and some of the challenges expected in the next decade

  17. Development of FPGA-Based Control Board

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yoon Hee; Jeong, See Chae; Choi, Woong Seock; Lee, Chang Jae; Jeong, Jin Kwon; Ha, Jae Hong [Korea Power Engineering Company Inc., Daejeon (Korea, Republic of)

    2009-10-15

    It is well known that existing nuclear power plant (NPP) control systems contain many components which are becoming obsolete at an increasing rate. Various studies have been conducted to address control system hardware obsolescence. Obsolete analog and digital control systems in non-nuclear power plants are commonly replaced with modern digital control systems, programmable logic controllers (PLC) and distributed control systems (DCS). Field Programmable Gate Arrays (FPGAs) are highlighted as an alternative means for obsolete control systems. FPGAs are advanced digital integrated circuits (ICs) that contain configurable (programmable) blocks of logic along with configurable interconnects between these blocks. Designers can configure (program) such devices to perform a tremendous variety of tasks. FPGAs have been evolved from the technology of Programmable Logic Device (PLD). Nowadays they can contain millions of logic gates by nanotechnology and so be used to implement extremely large and complex functions that previously could be realized only using Application-Specific Integrated Circuits (ASICs). This paper is to present the development of a FPGAbased control board performing user-defined control functions. An Actel ProASIC{sup plus} FPGA platform is implemented as the comparator of Plant Protection System (PPS). Functional simulation is implemented for the comparator.

  18. Board changes and the efficiency of the Nigerian stock market

    Directory of Open Access Journals (Sweden)

    Olatundun Adelegan

    2007-07-01

    Full Text Available This study provides some evidence on shareholders wealth effects of management board changes in Nigeria from 1997 to 2005. The study presents the total wealth effect and also distinguishes the wealth effects of announcements of new appointments, board resignations and retirements, death and mixed announcements.

  19. A Climate Change Board Game for Interdisciplinary Communication and Education

    Science.gov (United States)

    Eisenack, Klaus

    2013-01-01

    This article reports and reflects on the design and use of the board game KEEP COOL on climate change. The game covers and integrates central biophysical, economic, and political aspects of the issue. By using a board game as common language between students and scientists from different scientific cultures, knowledge of different disciplines can…

  20. Independent directors’ board networks and controlling shareholders’ tunneling behavior

    OpenAIRE

    Chen, Yunsen; Wang, Yutao; Lin, Le

    2014-01-01

    As one of the channels by which board directors build important relationships, board networks can affect the governance role of independent directors. Defining director board networks as their connections based on direct ties they establish when serving on at least one common board, this paper explores the role of the network centrality of independent directors in restraining tunneling behavior by controlling shareholders in the Chinese capital market. Our empirical evidence shows that tunnel...

  1. New drive and control concept of the paper-board machine at the board factory "Umka"

    Directory of Open Access Journals (Sweden)

    Jeftenić Borislav

    2004-01-01

    Full Text Available This paper describes the reconstruction of the drives of a paper machine for the press and drying part of the machine during June, 2001, as well as the expansion of the paper machine with a "third coating" during July, 2002 at the board factory "Umka". The existing old drive of the press and the drying groups was realized as a 76 meter long line shaft drive. The coating section of the machine was realized with sectional drives with DC motors fed from thyristor converters. The concept of the new drive is based on standard squirrel cage induction motors, fed from frequency converters. The system is controlled by a programmable logic controller. The communication between the controller, frequency converters and control panels is realized with a profibus protocol. The Laboratory for Electric Drives, of the Faculty of Electrical Engineering, Belgrade, was contracted for the drive part of the reconstruction of the paper-board machine. The complete project, supervision of the work of the investor's own technical services and final commissioning of the drives were organized in such a way that the drives were changed during the planned periods for the repair of the machine.

  2. Windows Calorimeter Control (WinCal) system configuration control board (SCCB) operating procedure

    International Nuclear Information System (INIS)

    Westsik, G.A.

    1997-01-01

    This document describes the operating procedure for the System Configuration Control Board (SCCB) performed in support of the Windows Calorimeter Control (WinCal) system. This board will consist of representatives from Babcock and Wilcox Hanford Company Babcock and Wilcox Protec, Inc.; and Lockheed Martin Services, Inc. In accordance with agreements for the joint use of the Babcock and Wilcox Hanford Company calorimeters located in the Hanford Site Plutonium Finishing Plant (PFP) Nondestructive Assay Laboratory, concurrence regarding changes to the WinCal system will be obtained from the International Atomic Energy Agency (IAEA). Further, changes to the WinCal software will be communicated to Los Alamos National Laboratory

  3. Controlling front-end electronics boards using commercial solutions

    CERN Document Server

    Beneyton, R; Jost, B; Schmeling, S

    2002-01-01

    LHCb is a dedicated B-physics experiment under construction at CERN's large hadron collider (LHC) accelerator. This paper will describe the novel approach LHCb is taking toward controlling and monitoring of electronics boards. Instead of using the bus in a crate to exercise control over the boards, we use credit-card sized personal computers (CCPCs) connected via Ethernet to cheap control PCs. The CCPCs will provide a simple parallel, I2C, and JTAG buses toward the electronics board. Each board will be equipped with a CCPC and, hence, will be completely independently controlled. The advantages of this scheme versus the traditional bus-based scheme will be described. Also, the integration of the controls of the electronics boards into a commercial supervisory control and data acquisition (SCADA) system will be shown. (5 refs).

  4. National Transportation Safety Board : weak internal control impaired financial accountability

    Science.gov (United States)

    2001-09-28

    The U. S. General Accounting Office (GAO) was asked to review the National Transportation Safety Board's (NTSB) internal controls over selected types of fiscal year expenditures. They were asked to determine whether internal control weaknesses were a...

  5. Sampling and Control Circuit Board for an Inertial Measurement Unit

    Science.gov (United States)

    Chelmins, David T (Inventor); Powis, Richard T., Jr. (Inventor); Sands, Obed (Inventor)

    2016-01-01

    A circuit board that serves as a control and sampling interface to an inertial measurement unit ("IMU") is provided. The circuit board is also configured to interface with a local oscillator and an external trigger pulse. The circuit board is further configured to receive the external trigger pulse from an external source that time aligns the local oscillator and initiates sampling of the inertial measurement device for data at precise time intervals based on pulses from the local oscillator. The sampled data may be synchronized by the circuit board with other sensors of a navigation system via the trigger pulse.

  6. Atomic Energy Control Board vocabulary - preliminary edition

    Energy Technology Data Exchange (ETDEWEB)

    Nolet, D [Public Works and Government Services Canada, Montreal, PQ (Canada). Terminology and Documentation Directorate

    1995-09-01

    This preliminary edition was prepared at the Board`s request to help it establish a standardized terminology. It was produced by scanning the 99 French and English documents listed at the end of this Vocabulary. The documents include legislation concerning atomic energy and the transportation of radioactive materials, as well as the Board`s publications, such as the Consultative Documents, Regulatory Documents and Notices. The terms included from the following areas are: radiation protection, reactor technology, nuclear fuel cycle, radioactive material packaging and transportation, radioactive waste management, uranium mines, and medical and industrial applications of radioelements. Also included are the titles of publications and the names of organizations and units. The vocabulary contains 2,589 concepts, sometimes accompanied by definitions, contexts or usage examples. Where terms have been standardized by the Canadian Committee for the Standardization of Nuclear Terminology, this has been indicated. Where possible, we have verified the terms using the TERMIUM, the Government of Canada Linguistic Data Bank. (author).

  7. Network on chip master control board for neutron acquisition

    International Nuclear Information System (INIS)

    Ruiz-Martinez, E.; Mary, T.; Mutti, P.; Ratel, J.; Rey, F.

    2012-01-01

    The acquisition master control board is designed to assemble the various acquisition modes in use at the Institut Laue-Langevin (ILL). The main goal is to make the card common for all the ILL's instruments in a simple, modular and open way, giving the possibility to add new functionalities in order to follow the evolving demand. It has been necessary to define a central element to provide synchronization to the rest of the units. The backbone of the proposed acquisition control system is the denominated master acquisition board. The master board consists on a VME64X configurable high density I/O connection carrier board based on the latest Xilinx Virtex-6T FPGA. The internal architecture of the FPGA is designed as a Network on Chip (NoC) approach. The complete system also includes a display board and n histogram modules for live display of the data from the detectors. (authors)

  8. Atomic Energy Control Board vocabulary - preliminary edition

    International Nuclear Information System (INIS)

    Nolet, D.

    1995-09-01

    This preliminary edition was prepared at the Board's request to help it establish a standardized terminology. It was produced by scanning the 99 French and English documents listed at the end of this Vocabulary. The documents include legislation concerning atomic energy and the transportation of radioactive materials, as well as the Board's publications, such as the Consultative Documents, Regulatory Documents and Notices. The terms included from the following areas are: radiation protection, reactor technology, nuclear fuel cycle, radioactive material packaging and transportation, radioactive waste management, uranium mines, and medical and industrial applications of radioelements. Also included are the titles of publications and the names of organizations and units. The vocabulary contains 2,589 concepts, sometimes accompanied by definitions, contexts or usage examples. Where terms have been standardized by the Canadian Committee for the Standardization of Nuclear Terminology, this has been indicated. Where possible, we have verified the terms using the TERMIUM, the Government of Canada Linguistic Data Bank. (author)

  9. FPGA based VME boards for Indus-2 timing control system

    International Nuclear Information System (INIS)

    Lulani, Nitin; Barpande, K.; Fatnani, P.; Sheth, Y.

    2009-01-01

    FPGA based two VME boards are developed and deployed recently for Indus-2 timing control system at RRCAT Indore. New FPGA based 5-channel programmable (Coarse-Fine) delay generator board has replaced three 2-channel coarse and one 4-channel fine existing delay generator boards. Introduction of this board has improved the fine delay resolution (to 0.5ns) as well as channel to channel jitter (to 0.8ns) of the system. It has also improved the coarse delay resolution from previous 33ns to 8ns with the possibility to work at divided Indus-2 RF clock. These improved parameters have resulted in better injection rate of beam. Old coincidence generator board is also replaced with FPGA based newly developed Coincidence clock generator VME board, which has resulted in successful controlled filling of beam (single, multi and 3-symmetrical bucket filling) in Indus-2. Three more existing boards will be replaced by single FPGA based delay generator card in near future. This paper presents the design, test results and features of new boards. (author)

  10. The Atomic Energy Control Board and the uranium mining industry

    International Nuclear Information System (INIS)

    Duncan, R.M.

    The Atomic Energy Control Board controls prescribed substances and nuclear facilities through a licensing system. It is only recently that this system has been applied to the uranium industry. There are four stages in the licensing procedure before a Mine-Mill Facility Operating Licence is issued: exploration requires an underground exploration permit; site approval is needed before the start of the development stage; development approval is required before the construction of the mill and waste management facilities and depends on the information in a preliminary safety report; the granting of a final operating licence occurs after the Board is satisfied with the final safety report, operating policies and principles, tailings management, and decommissioning plans. The Board has resource management policies designed to ensure that uranium reserves are available to meet Canada's needs. The administration of safeguards is also the Board's responsibility. (LL)

  11. Program Baseline Change Control Procedure

    International Nuclear Information System (INIS)

    1993-02-01

    This procedure establishes the responsibilities and process for approving initial issues of and changes to the technical, cost, and schedule baselines, and selected management documents developed by the Office of Civilian Radioactive Waste Management (OCRWM) for the Civilian Radioactive Waste Management System. This procedure implements the OCRWM Baseline Management Plan and DOE Order 4700.1, Chg 1. It streamlines the change control process to enhance integration, accountability, and traceability of Level 0 and Level I decisions through standardized Baseline Change Proposal (BCP) forms to be used by the Level 0, 1, 2, and 3 Baseline Change Control Boards (BCCBs) and to be tracked in the OCRWM-wide Configuration Information System (CIS) Database.This procedure applies to all technical, cost, and schedule baselines controlled by the Energy System Acquisition Advisory Board (ESAAB) BCCB (Level 0) and, OCRWM Program Baseline Control Board (PBCCB) (Level 1). All baseline BCPs initiated by Level 2 or lower BCCBs, which require approval from ESAAB or PBCCB, shall be processed in accordance with this procedure. This procedure also applies to all Program-level management documents controlled by the OCRWM PBCCB

  12. Control board and utility system for cell complex

    International Nuclear Information System (INIS)

    Almeida, G.L. de; Silva, A.C.; Souza, A.S.F. de; Souza, M.L.M. de; Rautenberg, F.A.

    1986-01-01

    To attend necessities of hot cells operation and process control for isotope production in IEN cyclotron (Brazilian-CNEN) a utility system, such as, electricity, water, vacuum, air, and gas, and control board was constructed, which advantages are presented. (M.C.K.)

  13. The role and structure of the Atomic Energy Control Board

    International Nuclear Information System (INIS)

    Hamel, P.E.

    1981-04-01

    The Atomic Energy Control Board is responsible for the control and supervision of the application and use of nuclear materials and the operation of nuclear facilities to ensure that the health and safety of people are protected and that the nuclear materials and equipment are used only in accordance with the government non-proliferation policy. Requirements for control and supervision are made into regulations subject to approval by the Governor in Council. They are applied through a comprehensive licensing system. The interpretation and implementation of the regulations are contained in a series of regulatory documents published from time to time by the Board. The functional organization of staff that assist the Board for the administration, the assessment and issuance of licenses, compliance and inspection, as well as for the management of the regulatory research program is described. (author) [fr

  14. New control method of on-board ATP system of Shinkansen trains

    Energy Technology Data Exchange (ETDEWEB)

    Fukuda, N.; Watanabe, T. [Railway Technical Research Inst. (Japan)

    2000-07-01

    We studied a new control method of the on-board automatic train protection (ATP) system for Shinkansen trains to shorten the operation time and not to degrade ride comfort at changes in deceleration of the train, while maintaining the safety and reliability of the present ATP signal system. We propose a new on-board pattern brake control system based on the present ATP data without changing the wayside equipment. By simulating the ATP braking of the proposed control method, we succeeded in shortening the operation time by 48 seconds per one station in comparison with the present ATP brake control system. This paper reports the concept of the system and simulation results of the on-board pattern. (orig.)

  15. 33 CFR 223.1 - Mississippi River Water Control Management Board.

    Science.gov (United States)

    2010-07-01

    ..., responsibilities and authority of the Mississippi River Water Control Management Board. (b) Applicability. This... control management within the Mississippi River Basin. (c) Objectives. The objectives of the Board are: (1...) Composition. The Mississippi River Water Control Management Board is a continuing board consisting of the...

  16. Evaluating transit preferential measures : Priority lanes, boarding and control strategies

    NARCIS (Netherlands)

    West, J.; Cats, O.

    2015-01-01

    Assessment of bus service improvements such as bus lanes, allowing boarding through all doors and headway-based holding control ideally requires a simulation model that combines features of both classical analytical models and microscopic simulation. However, as the usage of such models has been

  17. Control system for ATLAS TileCal HVRemote boards

    CERN Document Server

    AUTHOR|(SzGeCERN)739751; The ATLAS collaboration; Gurriana, Luis; Oleiro Seabra, Luis Filipe; Evans, Guiomar; Gomes, Agostinho; Maio, Amelia; Pinto Silva Rato, Catia Sofia; Almendra Sabino, Joao Maria; Soares Augusto, Jose

    2018-01-01

    One of the proposed solutions for upgrading the high voltage (HV) system of Tilecal, the ATLAS hadron calorimeter, consists in removing the HV regulation boards from the detector and deploying them in a low-radiation room where there is permanent access for maintenance. This option requires many ~100 m long HV cables but removes the requirement of radiation hard boards. That solution simplifies the control system of the HV regulation cards (called HVRemote). It consists of a Detector Control System (DCS) node linked to 256 HVRemote boards through a tree of Ethernet connections. Each HVRemote includes a smart Ethernet transceiver for converting data and commands from the DCS into serial peripheral interface (SPI) signals routed to SPI-capable devices in the HVRemote. The DCS connection to the transceiver and the control of some SPI-capable devices via Ethernet has been tested successfully. A test board (HVRemote-ctrl) with the interfacing sub-system of the HVRemote was fabricated. It is being tested through SP...

  18. Control System for ATLAS TileCal HVRemote boards

    CERN Document Server

    AUTHOR|(SzGeCERN)739751; The ATLAS collaboration; Gurriana, Luis; Oleiro Seabra, Luis Filipe; Evans, Guiomar; Gomes, Agostinho; Maio, Amelia; Pinto Silva Rato, Catia Sofia; Almendra Sabino, Joao Maria; Augusto, Jose

    2017-01-01

    One of the proposed solutions for upgrading the high voltage (HV) system of TileCal, the ATLAS central hadron calorimeter, consists in removing the HV regulation boards from the detector and deploying them in a low-radiation room where there is permanent access for maintenance. This option requires many ∼100 m long HV cables but removes the requirement of radiation hard boards. This solution simplifies the control system of the HV regulation cards (called HVRemote). It consists of a Detector Control System (DCS) node linked to 256 HVRemote boards through a tree of Ethernet connections. Each HVRemote includes a smart Ethernet transceiver for converting data and commands from the DCS into serial peripheral interface (SPI) signals routed to SPI-capable devices in the HVRemote. The DCS connection to the transceiver and the control of some SPI-capable devices via Ethernet has been tested successfully. A test board (HVRemote-Ctrl) with the interfacing sub-system of the HVRemote was fabricated. It is being tested ...

  19. 40 CFR 62.7856 - Albuquerque/Bernalillo County Air Quality Control Board.

    Science.gov (United States)

    2010-07-01

    ... Quality Control Board. 62.7856 Section 62.7856 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Albuquerque/Bernalillo County Air Quality Control Board. (a) Identification of Plan. Albuquerque-Bernalillo... County Air Quality Control Board on November 9, 2005. (b) Identification of Sources. The plan applies to...

  20. The Atomic Energy Control Board's regulatory research and support program

    International Nuclear Information System (INIS)

    1988-04-01

    The purpose of the Regulatory Research and Support Program is to augment and extend the capability of the Atomic Energy Control Board's (AECB) regulatory program beyond the capability of in-house resources. The overall objective of the program is to produce pertinent and independent scientific and other knowledge and expertise that will assist the AECB in making correct, timely and credible decisions on regulating the development, application and use of atomic energy. The objectives are achieved through contracted research, development, studies, consultant and other kinds of projects administered by the Research and Radiation Protection Branch (RRB) of the AECB

  1. Quality control and quality assurance of micromegas readout boards for the ATLAS New Small Wheel

    CERN Document Server

    Nanda, Amit

    2016-01-01

    The resistive anode boards of the Micromegas detectors for ATLAS NSW upgrade, will be produced in industries. The anode boards will be thoroughly evaluated at CERN following a detailed quality control and quality assurance (QA/QC) procedure. The report describes thoroughly the procedures and the design of a small QC tool for easier measurements of electrical properties of the readout boards.

  2. School Board Leadership and Policymaking in Changing Political Environments

    Science.gov (United States)

    Frankenberg, Erica; Diem, Sarah

    2013-01-01

    As the demographic make-up of public schools (and neighborhoods) shift and schools become increasingly segregated, the role of school boards becomes critically important in maintaining policies designed to remedy segregation and promote equal opportunity, policies which may challenge the status quo. Specifically, in school districts and…

  3. Assisting People with Multiple Disabilities Actively Correct Abnormal Standing Posture with a Nintendo Wii Balance Board through Controlling Environmental Stimulation

    Science.gov (United States)

    Shih, Ching-Hsiang; Shih, Ching-Tien; Chu, Chiung-Ling

    2010-01-01

    The latest researches adopted software technology turning the Nintendo Wii Balance Board into a high performance change of standing posture (CSP) detector, and assessed whether two persons with multiple disabilities would be able to control environmental stimulation using body swing (changing standing posture). This study extends Wii Balance Board…

  4. 77 FR 66909 - Notification of Contact Information Change for the Benghazi Accountability Review Board

    Science.gov (United States)

    2012-11-07

    ... DEPARTMENT OF STATE [Public Notice 8080] Notification of Contact Information Change for the Benghazi Accountability Review Board SUMMARY: On October 1, 2012, the Department of State announced the formation of the Benghazi Accountability Review Board (ARB) in the Federal Register (FR Doc. 2012-24504...

  5. How Does a Staggered Board Provision Affect Corporate Strategic Change?—Evidence from China’s Listed Companies

    Directory of Open Access Journals (Sweden)

    Kai Wang

    2018-05-01

    Full Text Available As China’s capital market has become more and more developed, listed companies have begun to establish some anti-takeover provisions to protect their controlling right. Existing studies have examined the consequences of the establishment of such provisions. However, few studies have explored how these provisions affect corporate strategic change. Based on agency theory and prospect theory, this paper proposes two channels through which one of the anti-takeover provisions, staggered board provision, impacts strategic change. Using the data of China’s listed companies which issue A-shares in Shenzhen and Shanghai stock exchanges from 2007 to 2014, these two channels are tested. We find that the existence of a staggered board provision negatively affects the extent of strategic change. In addition, if governance mechanisms restrict directors’ power, the relationship between staggered board provision and strategic change will be weakened, which supports the agency theory. If the listed company is faced with a more dynamic external environment, the relationship between staggered board provision and strategic change will be stronger, which supports the prospect theory. These results are robust after we use a different method to measure strategic change. Our conclusions not only enrich literature about strategic change and anti-takeover provisions, but also are helpful for improving corporate governance in China and other developing countries.

  6. Seismic qualification of nuclear control board by using base isolation technique

    International Nuclear Information System (INIS)

    Koizumi, T.; Tsujiuchi, N.; Fujita, T.

    1987-01-01

    The purpose is to adopt base isolation technique as a new approach for seismic qualification of nuclear control board. Basic concept of base isolation technique is expressed. Two dimensional linear motion mechanism with pre-tensioned coil springs and some dampers are included in the isolation device. Control board is regarded as a lamped mass system with inertia moment. Fundamental movement of this device and control board is calculated as a non-linear response problems. Fundamental analysis and numerical estimation, experimental investigation has been undertaken using an actual size control board. Sufficient agreement was recognized between experimental results and numerical estimation. (orig./HP)

  7. Evaluation Logic of Main Control Board Fire Risk

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Dae Il; Kim, Kilyoo; Lim, Ho Gon [KAERI, Daejeon (Korea, Republic of)

    2015-05-15

    The main control board (MCB) is defined as the collection of control panels inside the main control room (MCR) of a nuclear power plant (NPP). As the MCB has the control and instrumentation circuits of redundant trains for almost all plant systems, small fires within the control panels may be detrimental to the safe shutdown capability. A big fire affecting many panels in the MCB can cause a forced MCR abandonment of the operators as well as function failures or spurious operations of the control and instrumentation-related components. If the MCR cannot be habitable, a safe shutdown from outside the MCR can be achieved and maintained at an alternate shutdown panel electrically and physically independent from the MCR. Because the MCB consist of many electrical panels, it may have internal barriers between them to prevent a fire from spreading from its origin to neighboring locations. However, most MCBs of domestic NPPs do not have internal barriers within them. If the MCB cabinets are not separated by a double wall with an air gap, the fire propagation of an MCB panel fire cannot be ruled out. Recently, Joglar et al. proposed a new evaluation logic for the MCB panel fires and mentioned that an MCB fire can be divided into propagation and non-propagating fires for abandonment and non-abandonment fire scenarios. However, they did not present the details on the fire modeling approaches and probability formulas for the fire scenarios. In this paper, a decision tree for evaluating the risk of an MCB fire is proposed to systematically determine the fire scenarios in terms of the fire modeling approaches. This paper proposed a decision tree for evaluating the risk of an MCB fire to systematically determine the fire scenarios in terms of fire modeling approaches.

  8. Safety measures for the main control board replacement project at Ikata units 1 and 2

    International Nuclear Information System (INIS)

    Hashimoto, Nozomu; Tada, Kenji

    2013-01-01

    When Units 1 and 2 of the Ikata Power Station underwent replacement of their main control boards, control cabinets, and associated equipment, it was necessary to remove all the control boards, cabinets, and cables from the control building including from the main control room. This meant the loss of operation and monitoring functions in the main control room and functions of control cabinets. To maintain the operation and monitoring functions required under plant shutdown conditions, temporary operation and monitoring equipment (i.e., temporary main control board) was installed in the temporary main control room. The advance preparations included a trial switching from the permanent to the temporary main control board to identify and address potential problems in advance. When the replacement work was underway, a work schedule sheet posted in the temporary and the permanent control rooms was used to prevent human errors caused by operators’ recognition errors. Monitoring and control signals were switched from the old boards to the temporary boards and from the temporary boards to the new boards at appropriate timings to ensure plant safety during the replacement operation. (author)

  9. Modular space vehicle boards, control software, reprogramming, and failure recovery

    Science.gov (United States)

    Judd, Stephen; Dallmann, Nicholas; McCabe, Kevin; Delapp, Jerry; Prichard, Dean; Proicou, Michael; Seitz, Daniel; Stein, Paul; Michel, John; Tripp, Justin; Palmer, Joseph; Storms, Steven

    2017-09-12

    A space vehicle may have a modular board configuration that commonly uses some or all components and a common operating system for at least some of the boards. Each modular board may have its own dedicated processing, and processing loads may be distributed. The space vehicle may be reprogrammable, and may be launched without code that enables all functionality and/or components. Code errors may be detected and the space vehicle may be reset to a working code version to prevent system failure.

  10. The advanced control board summary and adaptation of the emergency operation support system

    International Nuclear Information System (INIS)

    Yamada, Yusuke; Mashio, Kenji

    2009-01-01

    In an attempt to further improve both reliability and operability of Pressurized Water Reactors (PWRs), the advanced main control board and the Emergency Operation Support System (EOSS), which assists operators to monitor and make judgments during an emergency situation, have been developed. In this paper, the advanced control board summary and functions of the EOSS are described. (author)

  11. Design, construction and quality control of resistive-Micromegas anode boards for the ATLAS experiment

    Science.gov (United States)

    Kuger, F.; Iengo, P.

    2018-02-01

    For the upcoming upgrade of the forward muon stations of the ATLAS detector, 1280m2 of Micromegas chambers have to be constructed. The industrialization of anode board production is an essential precondition. Design and construction methods of these boards have been optimized towards mass production. In parallel quality control procedures have been developed and established. The first set of large size Micromegas anode boards has finally been produced in industries and demonstrates the feasibility of the project on full-scale.

  12. 76 FR 8381 - National Science Board; Sunshine Act Meetings; Impromptu Notice of Time & Location Change

    Science.gov (United States)

    2011-02-14

    ... Time & Location Change The National Science Board's Committee on Program and Plans, pursuant to NSF... MATTER: No change. STATUS: No change. ORIGINAL LOCATION: Room 1295 or 1235, National Science Foundation, 4201Wilson Blvd., Arlington, VA 22230. NEW LOCATION: Room 1295. Public overflow room for the open session...

  13. A more functional arrangement of the boards for a control room of a nuclear reactor

    International Nuclear Information System (INIS)

    Gemin, Yves.

    1975-02-01

    The attention of manufacturers of control and monitoring materials is attracted on the possible improvements to be effected in control board reading using a more rational arrangement of monitoring stations [fr

  14. Control And Monitoring Of Controller Area Network Based Motor And Sensor Boards

    Directory of Open Access Journals (Sweden)

    Kubilay Taşdelen

    2018-06-01

    Full Text Available Remote control system also can use to provide the control of devices that are used in industrial environments nowadays. In this study, three experimental modules and one master module have been developed by using Arduino development board. These modules include sensors and motors. Experimental modules are controlled remotely through Android based application software, running on a smart phone. Bluetooth technology is used for this application. The connection between the experimental modules and master module are provided with Controller Area Network. In this way, the sensor and motor data are transmitted by serial communication.

  15. Design and construction of indigenously electronic boards for the automatic control of MNSR

    International Nuclear Information System (INIS)

    Khamis, I.; Nasri, M.

    2003-01-01

    Development, implementation, and manufacturing, indigenously, the first-of-a kind prototype of the electronic automatic control board of MSNR was made in this work. The new prototype includes some specific modifications that take into consideration the availability of electronic elements in the local market, the possibility to manufacture the control board indigenously, and the availability of such board as spare parts on reserve: The manufactured board has been tested (as cooled test) to check for functionality or malfunction before installation as part of the control and operating system. Later on, the board will be installed and tested as part of the above mentioned system to check whether it functions correctly under normal operating conditions (as hot test). (author)

  16. Atomic Energy Control Board and its role in the regulation of uranium and thorium mines

    International Nuclear Information System (INIS)

    Dory, A.B.

    1980-05-01

    Laws governing the Atomic Energy Control Board (AECB), its structure and functions is described in the context of the Board's role in uranium and thorium mining. The licensing and compliance procedures are described as they pertain to the objectives of the AECB in protecting workers, the public and the environment during construction, operating and closure of uranium and thorium mining and milling facilities. (OT)

  17. Leading School Change: Nine Strategies to Bring Everybody on Board

    Science.gov (United States)

    Whitaker, Todd

    2010-01-01

    Make positive and immediate changes in your school with the support of your entire staff. New from acclaimed speaker and bestselling author Todd Whitaker ("What Great Teachers Do Differently, Dealing with Difficult Parents"), Leading School Change provides principals, assistant principals, district superintendents, and other educators with…

  18. 46 CFR 401.428 - Basic rates and charges for carrying a U.S. pilot beyond normal change point or for boarding at...

    Science.gov (United States)

    2010-10-01

    ... boarding point, the ship shall pay at the rate of $719 per day or part thereof, plus reasonable travel... normal change point or for boarding at other than the normal boarding point. 401.428 Section 401.428... carrying a U.S. pilot beyond normal change point or for boarding at other than the normal boarding point...

  19. WindoWorks: A flexible program for computerized testing of accelerator control system electronic circuit boards

    International Nuclear Information System (INIS)

    Utterback, J.

    1993-09-01

    Since most accelerator control system circuit boards reside in a commercial bus architecture, such as CAMAC or VMEbus, a computerized test station is needed for exercising the boards. This test station is needed for the development of newly designed prototypes, for commissioning newly manufactured boards, for diagnosing boards which have failed in service, and for long term testing of boards with intermittent failure problems. WindoWorks was created to address these needs. It is a flexible program which runs on a PC compatible computer and uses a PC to bus crate interface. WindoWorks was designed to give the user a flexible way to test circuit boards. Each test is incapsulated into a window. By bringing up several different windows the user can run several different tests simultaneously. The windows are sizable, and moveable. They have data entry boxes so that the test can be customized to the users preference. The windows can be used in conjunction with each other in order to create supertests. There are several windows which are generic. They can be used to test basic functions on any VME (or CAMAC) board. There are other windows which have been created to test specific boards. New windows for testing specific boards can be easily created by a Pascal programmer using the WindoWorks framework

  20. A survey. Financial accounting and internal control functions pursued by hospital boards.

    Science.gov (United States)

    Gavin, T A

    1984-09-01

    Justification for a board committee's existence is its ability to devote time to issues judged to be important by the full board. This seems to have happened. Multiple committees pursue more functions than the other committee structures. Boards lacking an FA/IC committee pursue significantly fewer functions than their counterparts with committees. Substantial respondent agreement exists on those functions most and least frequently pursued, those perceived to be most and least important, and those perceived to be most and least effectively undertaken. Distinctions between committee structures and the full board, noted in the previous paragraph, hold true with respect to the importance of functions. All board structures identified reviewing the budget and comparing it to actual results as important. Committee structures are generally more inclined to address functions related to the work of the independent auditor and the effectiveness of the hospital's system and controls than are full board structures. Functions related to the internal auditor are pursued least frequently by all FA/IC board structures. The following suggestions are made to help boards pay adequate attention to and obtain objective information about the financial affairs of their hospitals. Those boards that do not have some form of an FA/IC committee should consider starting one. Evidence shows chief financial officers have been a moving force in establishing and strengthening such committees. Boards having a joint or single committee structure should consider upgrading their structure to either a single committee or multiple committees respectively. The complexity of the healthcare environment requires that more FA/IC functions be addressed by the board. The board or its FA/IC committee(s) should meet with their independent CPA's, fiscal intermediary auditors, and internal auditors. Where the hospital lacks an internal audit function a study should be undertaken to determine the feasibility of

  1. Effectiveness of a large mimic panel in an existing nuclear power plant central control board

    International Nuclear Information System (INIS)

    Kubota, Ryuji; Satoh, Hiroyuki; Sasajima, Katsuhiro; Kawano, Ryutaro; Shibuya Shinya

    1999-01-01

    We conducted the analysis of the nuclear power plant (NPP) operators' behaviors under emergency conditions by using training simulators as a joint research project by Japanese BWR groups for twelve years. In the phase-IV of this project we executed two kinds of experiments to evaluate the effectiveness of the interfaces. One was for evaluations of the interfaces such as CRTs with touch screen, a large mimic panel, and a hierarchical annunciator system introduced in the newly developed ABWR type central control board. The other was that we analyzed the operators' behaviors in emergency conditions by using the first generation BWR type central control board which was added new interfaces such as a large display screen and demarcation on the board to help operators to understand the plant. The demarcation is one of the visual interface improvements and its technique is that a line enclosing several components causes them to be perceived as a group.The result showed that both the large display panel Introduced in ABWR central control board and the large display screen in the existing BWR type central control board improved the performance of the NPP operators in the experiments. It was expected that introduction of the large mimic panel into the existing BWR type central control boards would improve operators' performance. However, in the case of actual installation of the large display board into the existing central control boards, there are spatial and hardware constraints. Therefore the size of lamps, lines connecting from symbols of the pumps or valves to the others' will have to be modified under these constraints. It is important to evaluate the displayed information on the large display board before actual installation. We made experiments to solve these problems by using TEPCO's research simulator which is added a large mimic panel. (author)

  2. Atomic Energy Control Board and its role in the regulation of uranium and thorium mining

    International Nuclear Information System (INIS)

    Zgola, M.B.

    1981-02-01

    This brief, presented to the Northwest Territories legislative hearings into uranium exploration, provides an overview of the jurisdictional role and regulatory philosophy of the Atomic Energy Control Board in uranium mining in Canada

  3. FASB (Financial Accounting Standards Board) proposal changes retiree healthcare benefit accounting.

    Science.gov (United States)

    Grimaldi, P L; Bertko, J M

    1989-07-01

    The Financial Accounting Standards Board (FASB) recently issued an exposure draft (ED) of a standard that would change the way organizations account for their employees' post-retirement healthcare benefits. According to the ED, organizations would have to switch from cash accounting to accrual accounting for post-retirement benefits as well as record their retiree healthcare liabilities on their balance sheets by 1992.

  4. 77 FR 58847 - Board of Scientific Counselors, National Center for Injury Prevention and Control (BSC, NCIPC)

    Science.gov (United States)

    2012-09-24

    ... the causes, diagnosis, treatment, control, and prevention of physical and mental diseases, and other... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, National Center for Injury Prevention and Control (BSC, NCIPC) In accordance with...

  5. 78 FR 29754 - Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC)

    Science.gov (United States)

    2013-05-21

    ... relating to the causes, diagnosis, treatment, control, and prevention of physical and mental diseases, and... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC) In accordance with...

  6. Nuclear electronic equipment for control and monitoring boards. MCH/MENT Recommendations

    International Nuclear Information System (INIS)

    Roquefort, H.

    1975-01-01

    The constitution of the group ''Materiel de Controle Homologue - Materiel Electronique Nucleaire pour Tableaux de controle et de commande'' is given. This group has to define, work out, and propose general and particular specifications related to reactor control-board instrumentation. These specifications are useful in France and abroad. Published documents are listed [fr

  7. A New Modular Control Board for Pulse-Jet Cleaning of Dust Collector Filter Bags

    Directory of Open Access Journals (Sweden)

    L. Carosso

    2018-04-01

    Full Text Available This work presents a timing system modular control board to be used for pulse-jet cleaning of dust collector filter bags or pneumatic conveying systems. Many systems of this kind are already available on the market but only some of them have the ability to operate in full range alternating current power supplies. The presented versatile and innovative control board can control the electro valves, either the ones operating with alternating current and those in direct current (since they are both used in the industrial plants. For the same reason, the designed prototype system can be powered with different voltages, widening the number of potential industrial applications. The electronic board has as main advantage the ability to fully automate the cleaning cycle. It can drive many electro valves simultaneously since it is possible to connect more control boards together if needed. It also allows the user to separate the control section of the system from the section dedicated to the actuation of the electro valves. The electro valves can be controlled from a PC terminal via ethernet. The work describes the adopted solutions and the steps made for the design of the entire prototypal modular board, with particular focus on the innovative timing system.

  8. Final report to the Atomic Energy Control Board on project management capabilities using NAOP as a case study

    International Nuclear Information System (INIS)

    Masters, P.

    1998-01-01

    The purpose of this report is to identify practices of the Atomic Energy Control Board that support or detract from the implementation of collaborative cross-functional project management and to recommend ways and means of increasing the Board's ability to respond to projects. Ontario Hydro's Nuclear Asset Optimization Program (NAOP) and the Board's response to that program form the basis of a case study for the purposes of this report. Issues examined include: Whether the Board follows a logical project management framework when it addresses projects such as the NAOP; where the Board exhibits good practices in addressing project such as the NAOP; and where the Board needs to develop better practices

  9. Sensitivity Analysis on Fire Modeling of Main Control Board Fire Using Fire Dynamics Simulator

    International Nuclear Information System (INIS)

    Kang, Dae Il; Lim, Ho Gon

    2015-01-01

    In this study, sensitivity analyses for an MCB fire were performed to identify the effects on the MCR forced abandonment time according to the changes of height and number for fire initiation places. Hanul Unit 3 NPP was selected as a reference plant for this study. In this study, sensitivity analyses for an MCB fire were performed to identify the effects on the MCR forced abandonment time according to the changes of height and number of fire initiation places. A main control board (MCB) fire can cause a forced main control room (MCR) abandonment of the operators as well as the function failures or spurious operations of the control and instrumentation-related components. If the MCR cannot be habitable, a safe shutdown from outside the MCR can be achieved and maintained at an alternate shutdown panel independent from the MCR. When the fire modeling for an electrical cabinet such as an MCB was performed, its many input parameters can affect the fire simulation results. This study results showed that the decrease in the height of fire ignition place and the use of single fire ignition place in fire modeling for the propagating fire shortened MCR abandonment time

  10. Sensitivity Analysis on Fire Modeling of Main Control Board Fire Using Fire Dynamics Simulator

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Dae Il; Lim, Ho Gon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    In this study, sensitivity analyses for an MCB fire were performed to identify the effects on the MCR forced abandonment time according to the changes of height and number for fire initiation places. Hanul Unit 3 NPP was selected as a reference plant for this study. In this study, sensitivity analyses for an MCB fire were performed to identify the effects on the MCR forced abandonment time according to the changes of height and number of fire initiation places. A main control board (MCB) fire can cause a forced main control room (MCR) abandonment of the operators as well as the function failures or spurious operations of the control and instrumentation-related components. If the MCR cannot be habitable, a safe shutdown from outside the MCR can be achieved and maintained at an alternate shutdown panel independent from the MCR. When the fire modeling for an electrical cabinet such as an MCB was performed, its many input parameters can affect the fire simulation results. This study results showed that the decrease in the height of fire ignition place and the use of single fire ignition place in fire modeling for the propagating fire shortened MCR abandonment time.

  11. Research of Control System and Fault Diagnosis of the Sound-absorbing Board Production Line

    Directory of Open Access Journals (Sweden)

    Yanjun Xiao

    2014-08-01

    Full Text Available Programmable Logic Controller is the core of the control system of the sound- absorbing board production line and the design of fault diagnosis is an essential modules in the sound- absorbing board production line. The article discourses the application of PLC in the control system of the production line, and designs the methods of grading treatment and prevention of troubles, which makes use of PLC’S logic functions. The method has good expansibility, and has good guidance to the fault diagnosis in other automation equipments.

  12. Development of an ATCA IPMI Controller Mezzanine Board and its usage on an ATCA ROD Evaluator board for the ATLAS LAr upgrade

    CERN Document Server

    "DUMONT DAYOT, N; The ATLAS collaboration; "CAP, S; "DUMONT DAYOT, N; "FOURNIER, L; "LETENDRE, N; "PERROT, G; "Wingerter, I

    2011-01-01

    In the context of the LHC upgrades, a new Read-Out Driver (ROD) board for the ATLAS LAr calorimeter is being developed. xTCA (Advanced/Micro Telecom Computing Architecture) is becoming a standard in high energy physics and is a serious candidate for future readout systems. We will present our current developments to master ATCA and to integrate a large number of very high speed links (96 links/8.5 Gbps) on a ROD Evaluator ATCA board. To manage our ROD Evaluator, we have developed a versatile ATCA IPMI controller for ATCA boards which is FPGA Mezzanine Card (FMC) compliant.

  13. Development, application, and validation of a survey for infectious disease control practices at equine boarding facilities.

    Science.gov (United States)

    Kirby, Alanna T; Traub-Dargatz, Josie L; Hill, Ashley E; Kogan, Lori R; Morley, Paul S; Heird, James C

    2010-11-15

    To develop a questionnaire for self-assessment of biosecurity practices at equine boarding facilities and to evaluate infectious disease control practices in these facilities in Colorado. Cross-sectional study. 64 equine boarding facilities in Colorado. Survey questions were rated according to importance for prevention and containment of equine infectious diseases. Point values (range, 0 to 20) were assigned for possible responses, with greater values given for optimal infection control methods. Questionnaires were mailed to equine boarding facilities in Colorado advertised on the World Wide Web. Survey responses were compared with assessments made by a member of the research team during visits to 30 randomly selected facilities. Agreement among results was analyzed via a kappa test and rated as poor, fair, moderate, substantial, or nearly perfect. Survey responses were received for 64 of 163 (39%) equine boarding facilities. Scores ranged from 106 to 402 points (maximum possible score, 418). Most facilities received better scores for movement and housing of equids than for other sections of the survey. Respondents at 24 of 48 (50%) facilities that routinely received new equids reported isolation of new arrivals. Agreement between self-assessment by survey respondents and evaluation by a member of the research team was determined to be fair to substantial. Most equine boarding facilities have opportunities to improve measures for prevention or containment of contagious diseases (eg, isolation of newly arrived equids and use of written health management protocols). Most self-assessments of infection control practices were accurate.

  14. 76 FR 9054 - National Science Board; Sunshine Act Meetings; Impromptu Notice of Change (Addition of Agenda Item)

    Science.gov (United States)

    2011-02-16

    ... NATIONAL SCIENCE FOUNDATION National Science Board; Sunshine Act Meetings; Impromptu Notice of Change (Addition of Agenda Item) The National Science Board's (NSB) Audit & Oversight (A&O) Committee..., National Science Foundation, 4201 Wilson Blvd., Arlington, VA 22230. Telephone: (703) 292-7000. Daniel A...

  15. A history of the Atomic Energy Control Board

    International Nuclear Information System (INIS)

    Sims, G.H.E.

    1980-07-01

    Topics covered include the pre-history of the AECB, its creation, early operations and evolution, its relations with nuclear research, the uranium industry, and the nuclear power industry, its involvement with transportation and safeguards, and some current problems. The focus is on the Atomic Energy Control Act and regulations derived from the act

  16. 77 FR 31018 - Board of Scientific Counselors (BSC), National Center for Injury Prevention and Control (NCIPC)

    Science.gov (United States)

    2012-05-24

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of... Violence or Sexual Violence Perpetration (R01), FOA CE12-003. In accordance with Section 10(a)(2) of the..., discussion of competitive applications following initial review of applications received in response to FOA...

  17. 76 FR 28438 - Board of Scientific Counselors (BSC), National Center for Injury Prevention and Control (NCIPC)

    Science.gov (United States)

    2011-05-17

    ... below concerns RFA CE10-004, the National Academic Centers of Excellence in Youth Violence Prevention... Violence Prevention (U01). Contact Person for More Information: Gwendolyn Haile Cattledge, PhD, M.S.E.H., F... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of...

  18. An assessment of the Atomic Energy Control Board consultation process

    International Nuclear Information System (INIS)

    1984-03-01

    This report analyzes the consultation process followed by the AECB in discharging its responsibility for regulation development. It shows how the process could be improved by better targeting of the consultation towards groups that can be expected to provide valuable input. It also addresses the question of how best to convey to members of those groups the information they need before making comments on proposed regulatory changes. The study also looks at how effective the process is and at possible procedural improvements that might facilitate the preparation of comments by outside groups and improve the understanding among the public of the role played by the AECB and of the issues surrounding nuclear facilities and the use and handling of prescribed substances

  19. Information Management System for the California State Water Resources Control Board (SWRCB)

    Science.gov (United States)

    Heald, T. C.; Redmann, G. H.

    1973-01-01

    A study was made to establish the requirements for an integrated state-wide information management system for water quality control and water quality rights for the State of California. The data sources and end requirements were analyzed for the data collected and used by the numerous agencies, both State and Federal, as well as the nine Regional Boards under the jurisdiction of the State Board. The report details the data interfaces and outlines the system design. A program plan and statement of work for implementation of the project is included.

  20. The Canadian public's awareness and perception of the Atomic Energy Control Board. V. 2

    International Nuclear Information System (INIS)

    Lacy, F.J.

    1989-01-01

    The primary objective of the research is to measure how the Atomic Energy Control Board (AECB) stands with the Canadian public. The research examines the existing level of awareness and knowledge about the AECB and the image that people have about the Board. Another issue addressed in the research is the level of confusion within the public between the AECB and Atomic Energy of Canada Limited. The data in this report can also be used as a benchmark against which improvements can be measured from the AECB's communications programs and activities undertaken in the future

  1. A system level boundary scan controller board for VME applications [to CERN experiments

    CERN Document Server

    Cardoso, N; Da Silva, J C

    2000-01-01

    This work is the result of a collaboration between INESC and LIP in the CMS experiment being conducted at CERN. The collaboration addresses the application of boundary scan test at system level namely the development of a VME boundary scan controller (BSC) board prototype and the corresponding software. This prototype uses the MTM bus existing in the VME64* backplane to apply the 1149.1 test vectors to a system composed of nineteen boards, called here units under test (UUTs). A top-down approach is used to describe our work. The paper begins with some insights about the experiment being conducted at CERN, proceed with system level considerations concerning our work and with some details about the BSC board. The results obtained so far and the proposed work is reviewed in the end of this contribution. (11 refs).

  2. WeaselBoard :

    Energy Technology Data Exchange (ETDEWEB)

    Mulder, John C.; Schwartz, Moses Daniel; Berg, Michael J.; Van Houten, Jonathan Roger; Urrea, Jorge Mario; King, Michael Aaron; Clements, Abraham Anthony; Jacob, Joshua A.

    2013-10-01

    Critical infrastructures, such as electrical power plants and oil refineries, rely on programmable logic controllers (PLCs) to control essential processes. State of the art security cannot detect attacks on PLCs at the hardware or firmware level. This renders critical infrastructure control systems vulnerable to costly and dangerous attacks. WeaselBoard is a PLC backplane analysis system that connects directly to the PLC backplane to capture backplane communications between modules. WeaselBoard forwards inter-module traffic to an external analysis system that detects changes to process control settings, sensor values, module configuration information, firmware updates, and process control program (logic) updates. WeaselBoard provides zero-day exploit detection for PLCs by detecting changes in the PLC and the process. This approach to PLC monitoring is protected under U.S. Patent Application 13/947,887.

  3. Using an Augmented Wobble Board as a Game Controller

    DEFF Research Database (Denmark)

    Nilsson, Niels Chr.; Serafin, Stefania

    2017-01-01

    Yearly more than a million succumb to ankle injuries in the United States alone, and it is not uncommon that individuals who have suffered such injuries lack the motivation necessary in order to successfully complete the rehabilitation process. In this article we describe three design and evaluat......Yearly more than a million succumb to ankle injuries in the United States alone, and it is not uncommon that individuals who have suffered such injuries lack the motivation necessary in order to successfully complete the rehabilitation process. In this article we describe three design...... and evaluation of three prototypes intended to provide individuals in need of ankle rehabilitation with the necessary motivation. The prototypes leverage video games potential as a source of intrinsic motivation by allowing individuals to control a game by means of a wobble board—an instrument used for ankle...... training–and thereby allow them to perform the needed exercises while playing. The design of the first prototype is informed by specific ankle exercises and theory pertaining to gameplay as emotional experience. An expert evaluation indicated that the prototype facilitated correct ankle training...

  4. ATCA/AXIe compatible board for fast control and data acquisition in nuclear fusion experiments

    International Nuclear Information System (INIS)

    Batista, A.J.N.; Leong, C.; Bexiga, V.; Rodrigues, A.P.; Combo, A.; Carvalho, B.B.; Fortunato, J.; Correia, M.; Teixeira, J.P.; Teixeira, I.C.; Sousa, J.; Gonçalves, B.; Varandas, C.A.F.

    2012-01-01

    Highlights: ► High performance board for fast control and data acquisition. ► Large IO channel number per board with galvanic isolation. ► Optimized for high reliability and availability. ► Targeted for nuclear fusion experiments with long duration discharges. ► To be used on the ITER Fast Plant System Controller prototype. - Abstract: An in-house development of an Advanced Telecommunications Computing Architecture (ATCA) board for fast control and data acquisition, with Input/Output (IO) processing capability, is presented. The architecture, compatible with the ATCA (PICMG 3.4) and ATCA eXtensions for Instrumentation (AXIe) specifications, comprises a passive Rear Transition Module (RTM) for IO connectivity to ease hot-swap maintenance and simultaneously to increase cabling life cycle. The board complies with ITER Fast Plant System Controller (FPSC) guidelines for rear IO connectivity and redundancy, in order to provide high levels of reliability and availability to the control and data acquisition systems of nuclear fusion devices with long duration plasma discharges. Simultaneously digitized data from all Analog to Digital Converters (ADC) of the board can be filtered/decimated in a Field Programmable Gate Array (FPGA), decreasing data throughput, increasing resolution, and sent through Peripheral Component Interconnect (PCI) Express to multi-core processors in the ATCA shelf hub slots. Concurrently the multi-core processors can update the board Digital to Analog Converters (DAC) in real-time. Full-duplex point-to-point communication links between all FPGAs, of peer boards inside the shelf, allow the implementation of distributed algorithms and Multi-Input Multi-Output (MIMO) systems. Support for several timing and synchronization solutions is also provided. Some key features are onboard ADC or DAC modules with galvanic isolation, Xilinx Virtex 6 FPGA, standard Dual Data Rate (DDR) 3 SODIMM memory, standard CompactFLASH memory card, Intelligent

  5. Enabling nurses to lead change: the orientation experiences of nurses to boards.

    Science.gov (United States)

    Walton, AnnMarie; Lake, Donna; Mullinix, Connie; Allen, Deborah; Mooney, Kathi

    2015-01-01

    Nurses need to be full partners in shaping health care and health care policy. One way to do this is to be present and active on boards at all levels. The purpose of this study is to examine the orientation experiences of nurses to boards and their preparation to influence health care and health care policy. A Web-based survey about the efficacy of board orientation was sent to members of three local boards made up exclusively of nurses. Liabilities and fiduciary duties were least likely to be addressed in board orientation for nurses. Board members requested more training in finance and a more formal/structured orientation process. Standardizing orientation elements for nurses serving on boards would best prepare them to serve on interprofessional hospital boards and work in the health policy arena. The orientation experience on local- and state-level nursing boards is fundamental to nurses beginning board service. Copyright © 2015 Elsevier Inc. All rights reserved.

  6. Energy and economic analysis of a building enclosure outfitted with a phase change material board (PCMB)

    International Nuclear Information System (INIS)

    Sun, Xiaoqin; Zhang, Quan; Medina, Mario A.; Lee, Kyoung Ok

    2014-01-01

    Highlights: • Phase change material boards (PCMBs) were simulated in building enclosures. • Energy and economic savings for these buildings were estimated. • The buildings were located in five cities with different climatic conditions. • The energy savings ratio was 100% when a cold energy source was used. • A mean electricity savings ratio of 13.1% was obtained. - Abstract: This paper presents energy and economic analyses related to the application of phase change materials boards (PCMBs) in building enclosures during the cooling season. A heat transfer model was developed, which was implemented via a computer program. Simulations were carried out using weather data files from five cities located in five different climate regions in China. Energy savings from using a natural cold source (e.g., outdoor air) and electricity savings from a reduction in electricity by air conditioning systems were evaluated. The energy savings ratio (ESR) and simple payback period (SPP) were used to assess the application of PCMBs in building enclosures. The selection of optimum phase transition temperatures for the PCMs for the various climates was made using indoor and outdoor air temperatures, as well as SPP. For space cooling purposes, it was suggested that phase transition temperatures should be at least 3 °C higher than the mean outdoor air temperature. Simple payback period suggested the possibility of the cost effective use of PCMBs in occupied buildings for moderate temperature climates

  7. Implementing and sustaining a hand hygiene culture change programme at Auckland District Health Board.

    Science.gov (United States)

    Roberts, Sally A; Sieczkowski, Christine; Campbell, Taima; Balla, Greg; Keenan, Andrew

    2012-05-11

    In January 2009 Auckland District Health Board commenced implementation of the Hand Hygiene New Zealand (HHNZ) programme to bring about a culture change and to improve hand hygiene compliance by healthcare workers. We describe the implementation process and assess the effectiveness of this programme 36 months after implementation. In keeping with the HHNZ guideline the implementation was divided into five steps: roll-out and facility preparation, baseline evaluation, implementation, follow-up evaluation and sustainability. The process measure was improvement in hand hygiene compliance and the outcome measure was Staphylococcus aureus clinical infection and bacteraemia rates. The mean (95% CI; range) baseline compliance rates for the national reporting wards was 35% (95% CI 24-46%, 25-61%). The overall compliance by the 7th audit period was 60% (95% CI 46-74; range 47-91). All healthcare worker groups had improvement in compliance. The reduction in healthcare-associated S. aureus bacteraemia rates following the implementation was statistically significant (p=0.027). Compliance with hand hygiene improved following implementation of a culture change programme. Sustaining this improvement requires commitment and strong leadership at a senior level both nationally and within each District Health Board.

  8. Control of vertical posture while standing on a sliding board and pushing an object.

    Science.gov (United States)

    Lee, Yun-Ju; Chen, Bing; Liang, Jing-Nong; Aruin, Alexander S

    2018-03-01

    Voluntary pushing or translation perturbation of the support surface each induces a body perturbation that affects postural control. The objective of the study was to investigate anticipatory (APA) and compensatory (CPA) postural adjustments when pushing an object (that induces self-initiated perturbation) and standing on a sliding board (that induces translational perturbation). Thirteen healthy young participants were instructed to push a handle with both hands while standing on a sliding board that was either free to move in the anterior-posterior direction or stationary. Electromyographic activity (EMG) of trunk and lower extremity muscles, center of pressure (COP) displacements, and the forces exerted by the hand were recorded and analyzed during the APA and CPA phases. When the sliding board was free to move during pushing (translation perturbation), onsets of activity of ventral leg muscles and COP displacement were delayed as compared to pushing when standing on a stationary board. Moreover, magnitudes of shank muscle activity and the COP displacement were decreased. When pushing heavier weight, magnitudes of muscle activity, COP displacement, and pushing force increased. The magnitude of activity of the shank muscles during the APA and CPA phases in conditions with translational perturbation varied with the magnitude of the pushing weight. The outcome of the study suggests that the central nervous system prioritizes the pushing task while attenuates the source of additional perturbation induced by translation perturbation. These results could be used in the development of balance re-training paradigms involving pushing weight while standing on a sliding surface.

  9. A Twenty-Two-Year-Old Community Advisory Board: Health Research as an Opportunity for Social Change

    Science.gov (United States)

    Silvestre, Anthony J.; Quinn, Sandra J.; Rinaldo, Charles R.

    2010-01-01

    Conducting health research often requires a partnership between marginalized communities and researchers. Community organizers can broker this partnership in a way that not only produces important scientific discoveries but also brings needed resources to the communities. This article is a description of a community advisory board established in 1984 to advise researchers on a longitudinal study of the natural history of AIDS among gay men. The Board successfully guided the recruitment of more than 3,000 gay and bisexual male volunteers and, at the same time worked as a powerful change agent. An analysis of minutes from all Board meetings between 1984-2006 indicates that significant social change as well as important research findings resulted from Board actions. Community organizers who work to create a mutually beneficial partnership between communities and researchers may find new opportunities to support community growth and social justice. PMID:20523763

  10. Morphologic change of rectosigmoid colon using belly board and distended bladder protocol

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Yeo Na; Chang, Jee Suk; Kim, Mi Sun; Lee, Jae Hwan; Byun, Hwa Kyung; Kim, Na Lee; Park, Sang Joon; Keum, Ki Chang; Koom, Woong Sub [Dept. of Radiation Oncology, Yonsei Cancer Center, Yonsei University Health System, Seoul (Korea, Republic of)

    2015-06-15

    This study investigates morphologic change of the rectosigmoid colon using a belly board in prone position and distended bladder in patients with rectal cancer. We evaluate the possibility of excluding the proximal margin of anastomosis from the radiation field by straightening the rectosigmoid colon. Nineteen patients who received preoperative radiotherapy between 2006 and 2009 underwent simulation in a prone position (group A). These patients were compared to 19 patients treated using a belly board in prone position and a distended bladder protocol (group B). Rectosigmoid colon in the pelvic cavity was delineated on planning computed tomography (CT) images. A total dose of 45 Gy was planned for the whole pelvic field with superior margin of the sacral promontory. The volume and redundancy of rectosigmoid colon was assessed. Patients in group B had straighter rectosigmoid colons than those in group A (no redundancy; group A vs. group B, 10% vs. 42%; p = 0.03). The volume of rectosigmoid colon in the radiation field was significantly larger in group A (56.7 vs. 49.1 mL; p = 0.009). In dose volume histogram analysis, the mean irradiated volume was lower in patients in group B (V45 27.2 vs. 18.2 mL; p = 0.004). In Pearson correlation coefficient analysis, the in-field volume of rectosigmoid colon was significantly correlated with the bladder volume (R = 0.86, p = 0.003). Use of a belly board and distended bladder protocol could contribute to exclusion of the proximal margin of anastomosis from the radiation field.

  11. Multiple sclerosis: changes in microarchitecture of white matter tracts after training with a video game balance board.

    Science.gov (United States)

    Prosperini, Luca; Fanelli, Fulvia; Petsas, Nikolaos; Sbardella, Emilia; Tona, Francesca; Raz, Eytan; Fortuna, Deborah; De Angelis, Floriana; Pozzilli, Carlo; Pantano, Patrizia

    2014-11-01

    To determine if high-intensity, task-oriented, visual feedback training with a video game balance board (Nintendo Wii) induces significant changes in diffusion-tensor imaging ( DTI diffusion-tensor imaging ) parameters of cerebellar connections and other supratentorial associative bundles and if these changes are related to clinical improvement in patients with multiple sclerosis. The protocol was approved by local ethical committee; each participant provided written informed consent. In this 24-week, randomized, two-period crossover pilot study, 27 patients underwent static posturography and brain magnetic resonance (MR) imaging at study entry, after the first 12-week period, and at study termination. Thirteen patients started a 12-week training program followed by a 12-week period without any intervention, while 14 patients received the intervention in reverse order. Fifteen healthy subjects also underwent MR imaging once and underwent static posturography. Virtual dissection of white matter tracts was performed with streamline tractography; values of DTI diffusion-tensor imaging parameters were then obtained for each dissected tract. Repeated measures analyses of variance were performed to evaluate whether DTI diffusion-tensor imaging parameters significantly changed after intervention, with false discovery rate correction for multiple hypothesis testing. There were relevant differences between patients and healthy control subjects in postural sway and DTI diffusion-tensor imaging parameters (P balance improvement detected at static posturography (r = -0.381 to 0.401, P balance board system modified the microstructure of superior cerebellar peduncles. The clinical improvement observed after training might be mediated by enhanced myelination-related processes, suggesting that high-intensity, task-oriented exercises could induce favorable microstructural changes in the brains of patients with multiple sclerosis.

  12. Instrumentation and control aging management: A focus on electronic parts and boards

    International Nuclear Information System (INIS)

    Crocombette, C.; Simon, G.; Favaro, P.; Naser, J.; Guffroy, G.

    2002-01-01

    Full text: The nuclear power industry is currently facing increasing aging and obsolescence issues with original equipment installed for instrumentation, control, and safety system applications. One area that needs attention is the aging of electronic boards and components used in instrumentation and control (I and C) systems in nuclear power plants (NPPs). In this context, EPRI has launched a project dedicated to NPP electronic component and board aging management. The goals of this project are: 1) to better understand the degradation mechanisms of I and C electronic systems; 2) to develop new methods to monitor prevalent mechanisms and forecast generic aging cases; and 3) to give guidelines for the aging management of I and C electronic systems. The ultimate objectives are: 1) to reduce the likelihood of losing plant availability due to a board or component failure; and 2) to reduce the global cost of maintenance by optimizing preventive maintenance tasks and the schedule for refurbishment or renewal. Degradation mechanisms of electronic boards in NPP - Aging mechanisms of electronic parts depend on technologies, manufacturing quality, and conditions of environment and operation. Aging of electronic parts is well documented in harsh environments (e.g., aerospace, military, or automotive industries data). However, only a small amount of data on electronic part failures in NPPs is available because the conditions are benign and the failure rates are supposed to be low. It is thus difficult to identify what will predominantly cause the aging of electronic systems after 20 or 30 years of operation. Usual causes are temperature, corrosion, temperature cycles, or extrinsic aggressions (Electrical Over Stress (EOS), Electro Static Discharges (ESD)). From field data and bibliographic analyses, we found that electrolytic capacitors, relays, potentiometers, power devices (thyristors, power transistors, etc.), optocouplers, on-board connectors, printed boards, integrated

  13. The Atomic Energy Control Board requirements for the radioisotope licensing of a radiopharmaceutical facility

    International Nuclear Information System (INIS)

    Kennedy, P.

    1980-01-01

    Items that must be addressed by an applicant for a radioisotope license in Canada are described. Site, design and operating conditions, safety assessment, organization, emergency procedures and operating policies and procedures must be described to the Atomic Energy Control Board (AECB), in support of any license application. All information submitted in support of the application is subject to AECB's policy on public access to that information. (OT)

  14. Closed to reason: time for accountability for the International Narcotic Control Board

    Directory of Open Access Journals (Sweden)

    Small Dan

    2007-05-01

    Full Text Available Abstract For more than two decades, the International Narcotic Control Board (INCB has tried to stop harm reduction and its HIV prevention programs. This posture is based on a fundamental misunderstanding of their responsibilities and of drug addiction itself – i.e. as a public health and clinical care matter made criminal by decree. A recent focal point for the Board's action has been rejecting the use of supervised injection facilities to reduce morbidity and mortality of drug injectors. They single out individual countries and attempt to bully them into rejecting such programs under the banner of the United Nations (falsely and in the name of international treaties. Their unrelenting and unjustified badgering of signatories to the international treaties that established the INCB is not only unjustified; it is an affront to one of the core purposes of the Board itself: to ensure adequate medical supplies and safe use of controlled substances. The INCB's ill-conceived obsession with intravenousaddiction as a crime flies in the face of the medical view and policies of the World Health Organization and the universally endorsed principles of the General Assembly of the United Nations. The latest target of the INCB is North America's only supervised injection facility, Insite, located in the inner city of Vancouver, Canada. Using the power of their office to meddle in matters of public health for individual nations is without medical, scientific or legal justification. But, most importantly, it is a matter of lifeand death for these most marginalized of citizens. The empirical evidence remains that a significant portion of the continued growth of the AIDS pandemic is due to injecting drug use, and the INCB's intrusion will inevitably result in additional deaths due to preventable HIV infections and drug overdoses. So we are very pleased to call to our readers' attention to a recent report produced by the Canadian HIV/AIDS Legal Network and the

  15. Regulating outdoor advertisement boards; employing spatial decision support system to control urban visual pollution

    Science.gov (United States)

    Wakil, K.; Hussnain, MQ; Tahir, A.; Naeem, M. A.

    2016-06-01

    Unmanaged placement, size, location, structure and contents of outdoor advertisement boards have resulted in severe urban visual pollution and deterioration of the socio-physical living environment in urban centres of Pakistan. As per the regulatory instruments, the approval decision for a new advertisement installation is supposed to be based on the locational density of existing boards and their proximity or remoteness to certain land- uses. In cities, where regulatory tools for the control of advertisement boards exist, responsible authorities are handicapped in effective implementation due to the absence of geospatial analysis capacity. This study presents the development of a spatial decision support system (SDSS) for regularization of advertisement boards in terms of their location and placement. The knowledge module of the proposed SDSS is based on provisions and restrictions prescribed in regulatory documents. While the user interface allows visualization and scenario evaluation to understand if the new board will affect existing linear density on a particular road and if it violates any buffer restrictions around a particular land use. Technically the structure of the proposed SDSS is a web-based solution which includes open geospatial tools such as OpenGeo Suite, GeoExt, PostgreSQL, and PHP. It uses three key data sets including road network, locations of existing billboards and building parcels with land use information to perform the analysis. Locational suitability has been calculated using pairwise comparison through analytical hierarchy process (AHP) and weighted linear combination (WLC). Our results indicate that open geospatial tools can be helpful in developing an SDSS which can assist solving space related iterative decision challenges on outdoor advertisements. Employing such a system will result in effective implementation of regulations resulting in visual harmony and aesthetic improvement in urban communities.

  16. Board Task Performance

    DEFF Research Database (Denmark)

    Minichilli, Alessandro; Zattoni, Alessandro; Nielsen, Sabina

    2012-01-01

    identify three board processes as micro-level determinants of board effectiveness. Specifically, we focus on effort norms, cognitive conflicts and the use of knowledge and skills as determinants of board control and advisory task performance. Further, we consider how two different institutional settings....... The findings show that: (i) Board processes have a larger potential than demographic variables to explain board task performance; (ii) board task performance differs significantly between boards operating in different contexts; and (iii) national context moderates the relationships between board processes...... and board task performance....

  17. Multiple single-board-computer system for the KEK positron generator control

    International Nuclear Information System (INIS)

    Nakahara, Kazuo; Abe, Isamu; Enomoto, Atsushi; Otake, Yuji; Urano, Takao

    1986-01-01

    The KEK positron generator is controlled by means of a distributed microprocessor network. The control system is composed of three kinds of equipment: device controllers for the linac equipment, operation management stations and a communication network. Individual linac equipment has its own microprocessor-based controller. A multiple single board computer (SBC) system is used for communication control and for equipment surveillance; it has a database containing communication and linac equipment status information. The linac operation management that should be the most soft part in the control system, is separated from the multiple SBC system and is carried out by work-stations. The principle that every processor executes only one task is maintained throughout the control system. This made the software architecture very simple. (orig.)

  18. Control and data acquisition ATCA/AXIe board designed for high system availability and reliability of nuclear fusion experiments

    International Nuclear Information System (INIS)

    Batista, A.J.N.; Leong, C.; Bexiga, V.; Rodrigues, A.P.; Combo, A.; Carvalho, B.B.; Carvalho, P.F.; Fortunato, J.; Santos, B.; Carvalho, P.; Correia, M.; Teixeira, J.P.; Teixeira, I.C.; Sousa, J.; Gonçalves, B.; Varandas, C.A.F.

    2013-01-01

    This paper describes the implementation and test of a control and data acquisition board designed to be integrated on systems demanding high availability and reliability, foreseen for future experiments like ITER or other long operation fusion devices. The Advanced Telecommunications Computing Architecture (ATCA) standard (PICMG 3.0 and 3.4) was selected for board implementation, which has support for the desired system robustness and performance. Some board features such as rear Input/Output (IO) signals connectivity (passive, copper tracks only), cable-less hot-swap maintenance, Intelligent Platform Management Controller (IPMC) and redundancy on timing signals, communications links and power supplies are significant board improvements, relatively to previous control and data acquisition boards, allowing the development of more reliable system architectures. Moreover, the developed board is also compatible with the emerging ATCA eXtensions for Instrumentation (AXIe) specifications, which provides additional timing and synchronization signals on the backplane. ATCA full-mesh, multi-gigabit, full-duplex, point-to-point communication links between Field Programmable Gate Arrays (FPGA), of peer boards inside the shelf, allow the implementation of distributed algorithms and development of Multi-Input Multi-Output (MIMO) systems. Up to 48 analog input channels, simultaneously digitized (2 MSPS @ 18-bits), are filtered/decimated by the board FPGA and sent to the ATCA/AXIe host through Peripheral Component Interconnect express (PCIe) using Direct Memory Access (DMA). In real-time, the host can update up to 48 analog output channels (1 MSPS @ 18-bits), per board, through PCIe. Further board characteristics comprise analog IO channels with galvanic isolation and an optional signal chopper mode, for offset compensation over time on digital integration of magnetic signals. Board time synchronization is attained by means of the Inter-Range Instrumentation Group (IRIG) time-code

  19. Decamp Clock Board Firmware

    International Nuclear Information System (INIS)

    Vicente, J. de; Castilla, J.; Martinez, G.

    2007-01-01

    Decamp (Dark Energy Survey Camera) is a new instrument designed to explore the universe aiming to reveal the nature of Dark Energy. The camera consists of 72 CCDs and 520 Mpixels. The readout electronics of DECam is based on the Monsoon system. Monsoon is a new image acquisition system developed by the NOAO (National Optical Astronomical Observatory) for the new generation of astronomical cameras. The Monsoon system uses three types of boards inserted in a Eurocard format based crate: master control board, acquisition board and clock board. The direct use of the Monsoon system for DECam readout electronics requires nine crates mainly due to the high number of clock boards needed. Unfortunately, the available space for DECam electronics is constrained to four crates at maximum. The major drawback to achieve such desired compaction degree resides in the clock board signal density. This document describes the changes performed at CIEMAT on the programmable logic of the Monsoon clock board aiming to meet such restricted space constraints. (Author) 5 refs

  20. Decamp Clock Board Firmware

    Energy Technology Data Exchange (ETDEWEB)

    Vicente, J. de; Castilla, J.; Martinez, G.

    2007-09-27

    Decamp (Dark Energy Survey Camera) is a new instrument designed to explore the universe aiming to reveal the nature of Dark Energy. The camera consists of 72 CCDs and 520 Mpixels. The readout electronics of DECam is based on the Monsoon system. Monsoon is a new image acquisition system developed by the NOAO (National Optical Astronomical Observatory) for the new generation of astronomical cameras. The Monsoon system uses three types of boards inserted in a Eurocard format based crate: master control board, acquisition board and clock board. The direct use of the Monsoon system for DECam readout electronics requires nine crates mainly due to the high number of clock boards needed. Unfortunately, the available space for DECam electronics is constrained to four crates at maximum. The major drawback to achieve such desired compaction degree resides in the clock board signal density. This document describes the changes performed at CIEMAT on the programmable logic of the Monsoon clock board aiming to meet such restricted space constraints. (Author) 5 refs.

  1. 75 FR 43944 - Defense Science Board; Task Force on Trends and Implications of Climate Change for National and...

    Science.gov (United States)

    2010-07-27

    ... DEPARTMENT OF DEFENSE Office of the Secretary Defense Science Board; Task Force on Trends and Implications of Climate Change for National and International Security AGENCY: Department of Defense (DoD... and Implications of Climate Change for National and International Security will meet in closed session...

  2. 75 FR 34438 - Defense Science Board Task Force on Trends and Implications of Climate Change for National and...

    Science.gov (United States)

    2010-06-17

    ... DEPARTMENT OF DEFENSE Office of the Secretary Defense Science Board Task Force on Trends and Implications of Climate Change for National and International Security AGENCY: Department of Defense (DoD... and Implications of Climate Change for National and International Security will meet in closed session...

  3. Low latency control board for LLRF system: SIMCON 3.1

    Science.gov (United States)

    Giergusiewicz, Wojciech; Jalmuzna, Wojciech; Pozniak, Krzysztof; Ignashin, Nikolay; Grecki, Mariusz; Makowski, Dariusz; Jezynski, Tomasz; Perkuszewski, Karol; Czuba, Krzysztof; Simrock, Stefan; Romaniuk, Ryszard

    2005-09-01

    A new version of the SIMCON system is presented in this paper. The SIMCON stands for the microwave, resonant, superconductive accelerator cavity simulator and controller (embracing the hardware and software layers). The current version of the SIMCON is 3.1. which is a considerable step forward from the previous 8-channel version 3.0. which was released at the beginning of 2005 and was made operable in April. Many important upgrades were implemented in SIMCON 3.1. It is a stand-alone VME board (whereas SIMCON 3.0 was modular) based on the Virtex II Pro 30 chip with two embedded Power PCs and DSP blocks. It has Ethernet and multiple gigabit optical I/Os. The Simcon 3.1 board provides 10 ADC channels. The architecture idea and block diagrams of the PCB for SIMCON 3.1. are presented. Some of the applied novel technical solutions, Protel"R" views and schemes are shown. A number of initial conclusions were drawn from a few month experience with the development of this new board. The tables of predicted system parameters are quoted.

  4. Physical and mechanical characterization of gypsum boards containing phase change materials for latent heat storage

    Directory of Open Access Journals (Sweden)

    Oliver-Ramírez, A.

    2011-09-01

    Full Text Available This article describes the design and manufacture of a gypsum board which, despite its 45 % wt content of phase change materials, meets the minimum physical and mechanical requirements laid down in the legislation on gypsum plasters (Spanish and European standard UNE EN 13279 and Spanish specifications for gypsum acceptance, RY 85. Under this design, a one-metre square, 1.5-cm thick board contains 4.75 kg of PCM, much more than in any prior drylining (the maximum attained to date is 3 kg per m2. The mechanical and physical characteristics of this new composite were previously improved with two joint-action additives: polypropylene fibres and melamine formaldehyde as a dispersing agent. In the 20-30 ºC temperature range, a gypsum board 1.5 cm thick containing this percentage of PCMs can store five times more thermal energy than conventional plasterboard of the same thickness, and the same amount of energy as half-foot hollow brick masonry.

    En esta investigación se ha diseñado y fabricado un panel de escayola que incorpora un 45% en peso de material de cambio de fase, manteniendo las propiedades físicas y mecánicas exigidas en la normativa de aplicación para yesos de construcción (UNE EN 13279 y referencias a la RY 85. Así, un panel de 1,0 m2 y 1,5 cm de espesor, contiene 4,75 kg de PCM, cantidad muy superior a la conseguida hasta la fecha (3 kg/m2. Para ello se ha mejorado previamente sus prestaciones mecánicas y físicas mediante adiciones binarias: fibras de polipropileno y dispersión de melanina formaldehído. Este porcentaje es capaz de almacenar en 1,5 cm de espesor cinco veces la energía térmica de un panel de cartón yeso con el mismo espesor y la misma cantidad que una fábrica de 1/2 pie de ladrillo hueco, en el rango de temperaturas próximas a la de confort (20-30 ºC.

  5. Implementation of a program to recover the Atomic Energy Control Board's operating costs

    International Nuclear Information System (INIS)

    1989-01-01

    The Canadian Atomic Energy Control Board (AECB) has undertaken a preliminary study to examine the feasibility of recovering the costs of its regulatory activities in accordance with the Canadian federal government user-pay principle. This study has found that recovery of the AECB's entire budget of $25 million per year would not have a significant financial impact on its licensees. The AECB has prepared regulations and a fee schedule and carried out consultations with the nuclear industry and the public to determine the potential financial and economic impacts of this initiative

  6. TA-55 change control manual

    International Nuclear Information System (INIS)

    Blum, T.W.; Selvage, R.D.; Courtney, K.H.

    1997-11-01

    This manual is the guide for initiating change at the Plutonium Facility, which handles the processing of plutonium as well as research on plutonium metallurgy. It describes the change and work control processes employed at TA-55 to ensure that all proposed changes are properly identified, reviewed, approved, implemented, tested, and documented so that operations are maintained within the approved safety envelope. All Laboratory groups, their contractors, and subcontractors doing work at TA-55 follow requirements set forth herein. This manual applies to all new and modified processes and experiments inside the TA-55 Plutonium Facility; general plant project (GPP) and line item funded construction projects at TA-55; temporary and permanent changes that directly or indirectly affect structures, systems, or components (SSCs) as described in the safety analysis, including Facility Control System (FCS) software; and major modifications to procedures. This manual does not apply to maintenance performed on process equipment or facility SSCs or the replacement of SSCs or equipment with documented approved equivalents

  7. Changes in Editorial board Rhinology, Prof. Valerie Lund demits office as Editor in Chief of Rhinology

    NARCIS (Netherlands)

    Fokkens, W. J.

    2014-01-01

    At the Editorial Board Meeting of Rhinology Valerie Lund indicated that she has decided to emit office as Editor in Chief of Rhinology. She became a member of the editorial board in 1993, a co-editor with Prof. Bert Huizing in 1999 and Editor in Chief in 2004. She leaves with our grateful thanks for

  8. 77 FR 51469 - Change of Address for Merit Systems Protection Board

    Science.gov (United States)

    2012-08-24

    ... Protection Board. DATES: Effective August 24, 2012. FOR FURTHER INFORMATION CONTACT: Thomas J. Schlageter, Assistant Legal Counsel, (202) 663-4668, or Danielle J. Hayot, Senior Attorney, (202) 663-4695, Office of...

  9. Risk assessment of main control board fire using fire dynamics simulator

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Dae Il, E-mail: dikang@kaeri.re.kr [KAERI, 1045 Daedeokdaero, Yuseong-Gu, Daejeon 305-353 (Korea, Republic of); Kim, Kilyoo; Jang, Seung-Cheol [KAERI, 1045 Daedeokdaero, Yuseong-Gu, Daejeon 305-353 (Korea, Republic of); Yoo, Seong Yeon [Chungnam National University, 79, Daehagro, Yuseong-Gu, Daejeon (Korea, Republic of)

    2015-08-15

    Highlights: • A decision tree for evaluating the risk of a main control board (MCB) fire was proposed to systematically determine the MCB fire scenarios. • Fire simulations using fire dynamics simulator (FDS) were performed to estimate the time to MCR abandonment. • Non-propagating and propagating fire scenarios were considered for fire simulations. • The current study indicates that the quantification of the MCB fire risk should address the propagating fire and non-propagating fire scenarios if the MCB has no internal barriers between the panels. - Abstract: This paper presents the process and results of a risk assessment for a main control board (MCB) fire using fire dynamics simulator (FDS). A decision tree for evaluating the risk of a MCB fire was proposed to systematically determine the MCB fire scenarios, and fire simulations using FDS were performed to estimate the time to MCR abandonment. As a reference NPP for this study, Hanul unit 3 in Korea was selected and its core damage frequency (CDF) owing to the MCB fire was quantified. Two types of fire scenarios were considered for fire simulations: non-propagating fire scenarios occurring within a single MCB panel and propagating fire scenarios spreading from one control panel to the adjacent panels. Further, the fire scenarios were classified into fires with and without a heating, ventilation, and air conditioning system (HVACS). The fire simulation results showed that the major factor causing the MCR evacuation was the optical density irrelevant to the availability of the HVACS. The risk assessment results showed that the abandonment fire scenario risk was less than the non-abandonment fire scenario risk and the propagating fire scenario risk was greater than the non-propagating fire scenario risk.

  10. Risk assessment of main control board fire using fire dynamics simulator

    International Nuclear Information System (INIS)

    Kang, Dae Il; Kim, Kilyoo; Jang, Seung-Cheol; Yoo, Seong Yeon

    2015-01-01

    Highlights: • A decision tree for evaluating the risk of a main control board (MCB) fire was proposed to systematically determine the MCB fire scenarios. • Fire simulations using fire dynamics simulator (FDS) were performed to estimate the time to MCR abandonment. • Non-propagating and propagating fire scenarios were considered for fire simulations. • The current study indicates that the quantification of the MCB fire risk should address the propagating fire and non-propagating fire scenarios if the MCB has no internal barriers between the panels. - Abstract: This paper presents the process and results of a risk assessment for a main control board (MCB) fire using fire dynamics simulator (FDS). A decision tree for evaluating the risk of a MCB fire was proposed to systematically determine the MCB fire scenarios, and fire simulations using FDS were performed to estimate the time to MCR abandonment. As a reference NPP for this study, Hanul unit 3 in Korea was selected and its core damage frequency (CDF) owing to the MCB fire was quantified. Two types of fire scenarios were considered for fire simulations: non-propagating fire scenarios occurring within a single MCB panel and propagating fire scenarios spreading from one control panel to the adjacent panels. Further, the fire scenarios were classified into fires with and without a heating, ventilation, and air conditioning system (HVACS). The fire simulation results showed that the major factor causing the MCR evacuation was the optical density irrelevant to the availability of the HVACS. The risk assessment results showed that the abandonment fire scenario risk was less than the non-abandonment fire scenario risk and the propagating fire scenario risk was greater than the non-propagating fire scenario risk

  11. On-Board Real-Time Optimization Control for Turbo-Fan Engine Life Extending

    Science.gov (United States)

    Zheng, Qiangang; Zhang, Haibo; Miao, Lizhen; Sun, Fengyong

    2017-11-01

    A real-time optimization control method is proposed to extend turbo-fan engine service life. This real-time optimization control is based on an on-board engine mode, which is devised by a MRR-LSSVR (multi-input multi-output recursive reduced least squares support vector regression method). To solve the optimization problem, a FSQP (feasible sequential quadratic programming) algorithm is utilized. The thermal mechanical fatigue is taken into account during the optimization process. Furthermore, to describe the engine life decaying, a thermal mechanical fatigue model of engine acceleration process is established. The optimization objective function not only contains the sub-item which can get fast response of the engine, but also concludes the sub-item of the total mechanical strain range which has positive relationship to engine fatigue life. Finally, the simulations of the conventional optimization control which just consider engine acceleration performance or the proposed optimization method have been conducted. The simulations demonstrate that the time of the two control methods from idle to 99.5 % of the maximum power are equal. However, the engine life using the proposed optimization method could be surprisingly increased by 36.17 % compared with that using conventional optimization control.

  12. EVALUATING IMPLEMENTION OF GOVERNMENTAL PROVISION ON NO. 60 YEAR 2008 FOR GOVERNMENTAL INTERNAL CONTROL IN BOARD OF FINANCE AND DEVELOPMENT CONTROL OF SOUTH SULAWESI

    OpenAIRE

    Mediaty

    2012-01-01

    The purpose of this research is to evaluate Governmental Internal Control System in Board of Finance and Development Control of South Sulawesi. Governmental Internal Control System is a management control of government in achieving purpose of the state with the issuance of Governmental Provision No. 60 year 2008. List of Governmental Internal Control Test consists of five parts in accordance with the Internal Control System elements are: Control Environment, Risk Assessment, Control Activitie...

  13. Long-term occlusal changes assessed by the American Board of Orthodontics' model grading system.

    Science.gov (United States)

    Aszkler, Robert M; Preston, Charles B; Saltaji, Humam; Tabbaa, Sawsan

    2014-02-01

    The purpose of this study was to assess the long-term posttreatment changes in all criteria of the American Board of Orthodontics' (ABO) model grading system. We used plaster models from patients' final and posttreatment records. Thirty patients treated by 1 orthodontist using 1 bracket prescription were selected. An initial discrepancy index for each subject was performed to determine the complexity of each case. The final models were then graded using the ABO's model grading system immediately at posttreatment and postretention. Statistical analysis was performed on the 8 criteria of the model grading system, including paired t tests and Pearson correlations. An alpha of 0.05 was considered statistically significant. The average length of time between the posttreatment and postretention records was 12.7 ± 4.4 years. It was shown that alignment and rotations worsened by postretention (P = 0.014), and a weak statistically significant correlation at posttreatment and postretention was found (0.44; P = 0.016). Both marginal ridges and occlusal contacts scored less well at posttreatment. These criteria showed a significant decrease in scores between posttreatment and postretention (P <0.001), but the correlations were not statistically significant. The average total score showed a significant decrease between posttreatment and postretention (P <0.001), partly because of the large decrease in the previous 2 criteria. Higher scores for occlusal contacts and marginal ridges were found at the end of treatment; however, those scores and the overall scores for the 30 subjects improved in the postretention phase. Copyright © 2014. Published by Mosby, Inc.

  14. Exhaust constituent emission factors of printed circuit board pyrolysis processes and its exhaust control

    Energy Technology Data Exchange (ETDEWEB)

    Chiang, Hung-Lung, E-mail: hlchiang@mail.cmu.edu.tw [Department of Health Risk Management, China Medical University, Taichung, Taiwan (China); Lin, Kuo-Hsiung [Department of Environmental Engineering and Science, Fooyin University, Kaohsiung, Taiwan (China)

    2014-01-15

    Highlights: • Recycling of waste printed circuit boards is an important issue. • Pyrolysis is an emerging technology for PCB treatment. • Emission factors of VOCs are determined for PCB pyrolysis exhaust. • Iron-Al{sub 2}O{sub 3} catalyst was employed for the exhaust control. -- Abstract: The printed circuit board (PCB) is an important part of electrical and electronic equipment, and its disposal and the recovery of useful materials from waste PCBs (WPCBs) are key issues for waste electrical and electronic equipment. Waste PCB compositions and their pyrolysis characteristics were analyzed in this study. In addition, the volatile organic compound (VOC) exhaust was controlled by an iron-impregnated alumina oxide catalyst. Results indicated that carbon and oxygen were the dominant components (hundreds mg/g) of the raw materials, and other elements such as nitrogen, bromine, and copper were several decades mg/g. Exhaust constituents of CO, H{sub 2}, CH{sub 4}, CO{sub 2}, and NOx, were 60–115, 0.4–4.0, 1.1–10, 30–95, and 0–0.7 mg/g, corresponding to temperatures ranging from 200 to 500 °C. When the pyrolysis temperature was lower than 300 °C, aromatics and paraffins were the major species, contributing 90% of ozone precursor VOCs, and an increase in the pyrolysis temperature corresponded to a decrease in the fraction of aromatic emission factors. Methanol, ethylacetate, acetone, dichloromethane, tetrachloromethane and acrylonitrile were the main species of oxygenated and chlorinated VOCs. The emission factors of some brominated compounds, i.e., bromoform, bromophenol, and dibromophenol, were higher at temperatures over 400 °C. When VOC exhaust was flowed through the bed of Fe-impregnated Al{sub 2}O{sub 3}, the emission of ozone precursor VOCs could be reduced by 70–80%.

  15. The influence on the performance of operators along with the introduction of the advanced main control board

    International Nuclear Information System (INIS)

    Ohsuga, Yasuhiko

    2010-01-01

    This paper describes an influence on the performance of operators along with the introduction of the advanced main control board (MCB). The influence on the performance of operators is considered based on the operating procedure, the requirements for operators and the operator training. The operating procedure is the document which puts forward the way that the designer has thought in advance for the operators and describes the performance of operators. The introduction of the advanced MCB seems to be bringing a change of the operating procedure. The requirements for operators are the knowledge, skills and attitude, and crew resource management (CRM) skill. CRM skill makes use of the knowledge, skills and attitude and improves the team performance. The advanced MCB seems to induce a change of CRM skill i.e. the communication, decision making or problem solving, team building, situation awareness, and workload management of different shift teams. The operator training is the best way to verify the change of the operating procedure and CRM skill. (author)

  16. Quality control process improvement of flexible printed circuit board by FMEA

    Science.gov (United States)

    Krasaephol, Siwaporn; Chutima, Parames

    2018-02-01

    This research focuses on the quality control process improvement of Flexible Printed Circuit Board (FPCB), centred around model 7-Flex, by using Failure Mode and Effect Analysis (FMEA) method to decrease proportion of defective finished goods that are found at the final inspection process. Due to a number of defective units that were found at the final inspection process, high scraps may be escaped to customers. The problem comes from poor quality control process which is not efficient enough to filter defective products from in-process because there is no In-Process Quality Control (IPQC) or sampling inspection in the process. Therefore, the quality control process has to be improved by setting inspection gates and IPCQs at critical processes in order to filter the defective products. The critical processes are analysed by the FMEA method. IPQC is used for detecting defective products and reducing chances of defective finished goods escaped to the customers. Reducing proportion of defective finished goods also decreases scrap cost because finished goods incur higher scrap cost than work in-process. Moreover, defective products that are found during process can reflect the abnormal processes; therefore, engineers and operators should timely solve the problems. Improved quality control was implemented for 7-Flex production lines from July 2017 to September 2017. The result shows decreasing of the average proportion of defective finished goods and the average of Customer Manufacturers Lot Reject Rate (%LRR of CMs) equal to 4.5% and 4.1% respectively. Furthermore, cost saving of this quality control process equals to 100K Baht.

  17. Changes to the law on consent following Montgomery vs Lanarkshire Health Board.

    Science.gov (United States)

    Clearkin, Louis

    2016-06-01

    The Supreme Court's determination on Montgomery (AP) (Appellant) v Lanarkshire Health Board (Respondent) (Scotland) [2015] clarified UK law on consent. It is for the informed patient to determine which intervention, if any, they will undergo. All doctors must meet this standard and may need to reassess their practice to do so.

  18. Implementation of the program of quality control of the system on-board imager of varian: initial assessment; Puesta en marcha del programa de control de calidad del sistema on-board imager de varian: evaluacion inicial

    Energy Technology Data Exchange (ETDEWEB)

    Ortega Martin, I.; Ruiz Morales, C.; Lopez Sanchez, F.; Tobarra Gonzalez, B. M.

    2013-07-01

    This work aims to present evidence that are part of our quality control system on-board Imager of Varian, elaborated from recommendations and national and international protocols, as well as a first assessment of the results obtained to date. (Author)

  19. 78 FR 300 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-01-03

    ... Bancshares, Inc., and thereby acquire control of First Commercial Bank, both of Edmond, Oklahoma. Board of... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C...

  20. Implementation of the program of quality control of the system on-board imager of varian: initial assessment

    International Nuclear Information System (INIS)

    Ortega Martin, I.; Ruiz Morales, C.; Lopez Sanchez, F.; Tobarra Gonzalez, B. M.

    2013-01-01

    This work aims to present evidence that are part of our quality control system on-board Imager of Varian, elaborated from recommendations and national and international protocols, as well as a first assessment of the results obtained to date. (Author)

  1. XMOS XC-2 Development Board for Mechanical Control and Data Collection

    Science.gov (United States)

    Jarnot, Robert F.; Bowden, William J.

    2011-01-01

    The scanning microwave limb sounder (SMLS) will use technological improvements in low-noise mixers to provide precise data on the Earth s atmospheric composition with high spatial resolution. This project focuses on the design and implementation of a realtime control system needed for airborne engineering tests of the SMLS. The system must coordinate the actuation of optical components using four motors with encoder readback, while collecting synchronized telemetric data from a GPS receiver and 3-axis gyrometric system. A graphical user interface for testing the control system was also designed using Python. Although the system could have been implemented with an FPGA(fieldprogrammable gate array)-based setup, a processor development kit manufactured by XMOS was chosen. The XMOS architecture allows parallel execution of multiple tasks on separate threads, making it ideal for this application. It is easily programmed using XC (a subset of C). The necessary communication interfaces were implemented in software, including Ethernet, with significant cost and time reduction compared to an FPGA-based approach. A simple approach to control the chopper, calibration mirror, and gimbal for the airborne SMLS was needed. The XMOS board allows for multiple threads and real-time data acquisition. The XC-2 development kit is an attractive choice for synchronized, real-time, event-driven applications. The XMOS is based on the transputer microprocessor architecture developed for parallel computing, which is being revamped in this new platform. The XMOS device has multiple cores capable of running parallel applications on separate threads. The threads communicate with each other via user-defined channels capable of transmitting data within the device. XMOS provides a C-based development environment using XC, which eliminates the need for custom tool kits associated with FPGA programming. The XC-2 has four cores and necessary hardware for Ethernet I/O.

  2. Conceptual design of the X-IFU Instrument Control Unit on board the ESA Athena mission

    Science.gov (United States)

    Corcione, L.; Ligori, S.; Capobianco, V.; Bonino, D.; Valenziano, L.; Guizzo, G. P.

    2016-07-01

    Athena is one of L-class missions selected in the ESA Cosmic Vision 2015-2025 program for the science theme of the Hot and Energetic Universe. The Athena model payload includes the X-ray Integral Field Unit (X-IFU), an advanced actively shielded X-ray microcalorimeter spectrometer for high spectral resolution imaging, utilizing cooled Transition Edge Sensors. This paper describes the preliminary architecture of Instrument Control Unit (ICU), which is aimed at operating all XIFU's subsystems, as well as at implementing the main functional interfaces of the instrument with the S/C control unit. The ICU functions include the TC/TM management with S/C, science data formatting and transmission to S/C Mass Memory, housekeeping data handling, time distribution for synchronous operations and the management of the X-IFU components (i.e. CryoCoolers, Filter Wheel, Detector Readout Electronics Event Processor, Power Distribution Unit). ICU functions baseline implementation for the phase-A study foresees the usage of standard and Space-qualified components from the heritage of past and current space missions (e.g. Gaia, Euclid), which currently encompasses Leon2/Leon3 based CPU board and standard Space-qualified interfaces for the exchange commands and data between ICU and X-IFU subsystems. Alternative architecture, arranged around a powerful PowerPC-based CPU, is also briefly presented, with the aim of endowing the system with enhanced hardware resources and processing power capability, for the handling of control and science data processing tasks not defined yet at this stage of the mission study.

  3. Test and commissioning of the CARLOS control boards for the ALICE Silicon Drift Detectors

    CERN Document Server

    Alessandro, Bruno; Beolè, S; Coli, S; Costa, F; De Remigis, P; Falchieri, Davide; Gandolfi, Enzo; Giraudo, G; Giubellino, P; Kral, J F; Masetti, Massimo; Mazza, G; Rashevsky, A; Riccati, Lodovico; Rivetti, A; Senyukov, S; Toscano, Letterio; Tosello, F; Wheadon, R

    2007-01-01

    This paper presents the test strategy employed during the installation of the CARLOS end ladder boards developed for the Silicon Drift Detectors (SDD) of ALICE. Each CARLOS board compresses the data provided by the front-end electronics of one SDD and sends them via an optical link of 800 Mbit/s to the data concentrator card (CARLOSrx) located in the counting room. The paper describes the integration of the CARLOS boards in the final SDD system, including its cooling and mechanical support, the power supply distribution and the optical interconnections. The results of the tests performed after each step of the installation sequence are reported.

  4. ONBORD (On-Board Navigation of Ballistic ORDnance): Gun-Launched Munitions Flight Controller

    National Research Council Canada - National Science Library

    Wilson, Michael

    2004-01-01

    .... The electronics consist of a single 1.4-inch printed circuit board that includes the Texas Instruments TMS320F2812 digital signal processor whose microcontroller-like capabilities reduce the amount of peripheral circuitry necessary...

  5. Development of an ATCA IPMI controller mezzanine board to be used in the ATCA developments for the ATLAS Liquid Argon upgrade

    CERN Document Server

    Letendre, N; The ATLAS collaboration

    2012-01-01

    In the context of the LHC upgrade, we develop a new Read Out Driver (ROD) for the ATLAS Liquid Argon (LAr) community. ATCA and μTCA (Advanced/Micro Telecom Computing Architecture) is becoming a standard in high energy physics and a strong candidate to be used for boards and crates. We work to master ATCA and to integrate a large number of high speed links (96 links at 8.5 Gbps) on a ROD evaluation ATCA board. A versatile ATCA IPMI controller for ATCA boards which is FPGA Mezzanine Card (FMC) compliant has been developed to control the ROD evaluation board.

  6. 78 FR 63978 - Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company

    Science.gov (United States)

    2013-10-25

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and the Board's Regulation LL (12 CFR part 238) to acquire shares of a savings and...

  7. 78 FR 38715 - Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company

    Science.gov (United States)

    2013-06-27

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and the Board's Regulation LL (12 CFR part 238) to acquire shares of a savings and...

  8. 77 FR 74191 - Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company

    Science.gov (United States)

    2012-12-13

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and the Board's Regulation LL (12 CFR Part 238) to acquire shares of a savings and...

  9. 78 FR 62302 - Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company

    Science.gov (United States)

    2013-10-15

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and the Board's Regulation LL (12 CFR Part 238) to acquire shares of a savings and...

  10. 77 FR 66616 - Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company

    Science.gov (United States)

    2012-11-06

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and the Board's Regulation LL (12 CFR Part 238) to acquire shares of a savings and...

  11. 76 FR 75882 - Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company

    Science.gov (United States)

    2011-12-05

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and the Board's Regulation LL (12 CFR Part 238) to acquire shares of a savings and...

  12. 78 FR 21368 - Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company

    Science.gov (United States)

    2013-04-10

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and the Board's Regulation LL (12 CFR part 238) to acquire shares of a savings and...

  13. 76 FR 61102 - Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company

    Science.gov (United States)

    2011-10-03

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and the Board's Regulation LL (12 CFR part 238) to acquire shares of a savings and...

  14. 76 FR 72922 - Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company

    Science.gov (United States)

    2011-11-28

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and the Board's Regulation LL (12 CFR part 238) to acquire shares of a savings and...

  15. 77 FR 26009 - Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company

    Science.gov (United States)

    2012-05-02

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and the Board's Regulation LL (12 CFR part 238) to acquire shares of a savings and...

  16. 78 FR 65312 - Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company

    Science.gov (United States)

    2013-10-31

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Savings and Loan Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and the Board's Regulation LL (12 CFR Part 238) to acquire shares of a savings and...

  17. 77 FR 60996 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-10-05

    ... shares of Anchor Commercial Bank, Juno Beach, Florida. Board of Governors of the Federal Reserve System... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C...

  18. 75 FR 31788 - Change in Bank Control Notices; Acquisition of Shares of Bank or Bank Holding Companies

    Science.gov (United States)

    2010-06-04

    ... voting shares of Chino Commercial Bank, N.A., both of Chino, California. Board of Governors of the... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisition of Shares of Bank or Bank Holding Companies The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C...

  19. 77 FR 50689 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-08-22

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  20. 78 FR 43883 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-07-22

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  1. 78 FR 38978 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-06-28

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  2. 77 FR 54917 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-09-06

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  3. 75 FR 5322 - Change in Bank Control Notices; Acquisition of Shares of Bank or Bank Holding Companies

    Science.gov (United States)

    2010-02-02

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisition of Shares of Bank or Bank Holding Companies The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. [thinsp]225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire a bank or bank...

  4. 78 FR 35271 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-06-12

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  5. 78 FR 49268 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-08-13

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  6. 77 FR 68121 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-11-15

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  7. 78 FR 13877 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-03-01

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  8. 77 FR 58141 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-09-19

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  9. 78 FR 61352 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-10-03

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  10. 77 FR 4323 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-01-27

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  11. 75 FR 3904 - Change in Bank Control Notices; Acquisition of Shares of Bank or Bank Holding Companies

    Science.gov (United States)

    2010-01-25

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisition of Shares of Bank or Bank Holding Companies The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. [thinsp]225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire a bank or bank...

  12. 77 FR 66463 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-11-05

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  13. 78 FR 41929 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-07-12

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  14. 77 FR 37406 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-06-21

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  15. 78 FR 51726 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-08-21

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  16. 77 FR 31612 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-05-29

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  17. 77 FR 9250 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-02-16

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  18. 75 FR 9414 - Change in Bank Control Notices; Acquisition of Shares of Bank or Bank Holding Companies

    Science.gov (United States)

    2010-03-02

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisition of Shares of Bank or Bank Holding Companies The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. [thinsp]225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire a bank or bank...

  19. 78 FR 62301 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-10-15

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  20. 78 FR 25084 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-04-29

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  1. 78 FR 76834 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-12-19

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  2. 77 FR 60702 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-10-04

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  3. 77 FR 16839 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-03-22

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  4. 78 FR 53457 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-08-29

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  5. 78 FR 45535 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-07-29

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  6. 77 FR 73031 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-12-07

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  7. 77 FR 2293 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-01-17

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  8. 77 FR 64801 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-10-23

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  9. 77 FR 34385 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-06-11

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  10. 77 FR 58379 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-09-20

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  11. 77 FR 33459 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-06-06

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  12. 77 FR 43824 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-07-26

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  13. 78 FR 39729 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-07-02

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  14. 78 FR 24747 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-04-26

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  15. 77 FR 72864 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-12-06

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  16. 78 FR 97 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-01-02

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  17. 77 FR 3475 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-01-24

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or bank...

  18. 78 FR 27389 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-05-10

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  19. 77 FR 63314 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-10-16

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  20. 77 FR 19665 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-04-02

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  1. 78 FR 76305 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-12-17

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  2. 78 FR 49753 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-08-15

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  3. 78 FR 3425 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-01-16

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  4. 77 FR 27458 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-05-10

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank [[Page...

  5. 77 FR 39244 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-07-02

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  6. 78 FR 3897 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2013-01-17

    ... FEDERAL RESERVE SYSTEM Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C. 1817(j)) and Sec. 225.41 of the Board's Regulation Y (12 CFR 225.41) to acquire shares of a bank or...

  7. Requirements for Vertically Installed Runoff Control Boards for the “Paddy Field Dam” and Appropriate Orifice Shapes

    Science.gov (United States)

    Natsuki, Yoshikawa; Hideyuki, Koide; Shin-Ichi, Misawa

    While the “Paddy Field Dam” project has been recognized as an effective flood control measure, there are some cases in which the runoff control boards are vertically installed on the opening of the drainage boxes without careful consideration of the orifice shape and size. The important criteria for the runoff control boards to be satisfied are: 1. to maintain a sufficient peak runoff control function, 2. to avoid excessive ponding causing overflow, 3. to minimize the influence to the ordinary water management, and 4. to reserve sufficient orifice area to avoid blockage of the orifice with floating litters. The purpose of this study is to examine proper shapes and sizes of the orifice to satisfy the criteria for the vertically installed runoff control boards through experiments and simulations. Given the condition that the orifice has sufficient area to avoid overflow with 10 and 20 year return period rainfall event (criteria 2), the simulation results show that the orifice with horizontally wider shapes has advantages over the square or circular shapes in terms of the criteria 1 and 3. The disadvantage of the horizontally wider shapes is the blockage of the orifice with floating litters (criteria 4). In conclusion, we proposed to secure sufficient vertical distance to avoid this problem by setting a lower limit on the vertical distance and then determine the widest horizontal distance to optimize all the criteria. In addition, we have constructed the “Orifice Design Assist Tool” on the basis of the examinations in this study.

  8. In regard to the change of the editorial board and the advisory board of the Bosnian Journal of Basic Medical Sciences

    Directory of Open Access Journals (Sweden)

    Bakir Mehić

    2014-02-01

    Full Text Available The most vital part of a scientific journal is the Editorial board and Advisory board. So, it is never good that the composition of these boards lasts longer than 2-3 years.With the first number of BJBMS in 2014, a new composition of the Editorial board and Advisory Board of this journal was published. They consist of eminent scientists with adequate qualifications from nine countries and who can actively contribute to the good management of the journal and its further development. Their tasks will be: -Supporting and promotion of the journal (being true ambassadors of the journal,-Writing editorials, reviews and commentaries on works from the field of their expertise,-Giving opinions and suggestions on the management and policy of the journal, with the timely identification of the upcoming challenges. Commitment to upholding the ethics of publishing with impartiality and confidentiality, the fight against plagiarism and multiple or simultaneous publication of articles will remain a priority in the work of the Editorial Board and Advisory Board of BJBMS. Also, the newly appointed boards will continue to work in the way of protection of copyright for authors who were victims of plagiarism. In this sense, the editor in chief, together with the Editorial Board will take measures in accordance with the guidelines of the Committee for Ethics in publishing [1].Quality assurance in publishing and also in BJBMS is focused on the detection of forged data, images, and plagiarized articles. In its future work Editorial Board of BJBMS is obliged to pay attention to supporting academic integrity, ensuring the integrity of academic records and intellectual property. This latter implies: -Request for evidence of ethics for the approved research, that is, authors will be asked to prove that they obtained the consent of the patient for the study or in the case of experiments on animals, which methods were used so the animals would not suffer?-Ensuring that

  9. Magnetic compatibility of standard components for electrical installations: Computation of the background field and consequences on the design of the electrical distribution boards and control boards for the ITER Tokamak building

    International Nuclear Information System (INIS)

    Benfatto, I.; Bettini, P.; Cavinato, M.; Lorenzi, A. De; Hourtoule, J.; Serra, E.

    2005-01-01

    Inside the proposed Tokamak building, the ITER poloidal field magnet system would produce a stray magnetic field up to 70 mT. This is a very unusual environmental condition for electrical installation equipment and limited information is available on the magnetic compatibility of standard components for electrical distribution boards and control boards. Because this information is a necessary input for the design of the electrical installation inside the proposed ITER Tokamak building specific investigations have been carried out by the ITER European Participant Team. The paper reports on the computation of the background magnetic field map inside the ITER Tokamak building and the consequences on the design of the electrical installations of this building. The effects of the steel inside the building structure and the feasibility of magnetic shields for electrical distribution boards and control boards are also reported in the paper. The results of the test campaigns on the magnetic field compatibility of standard components for electrical distribution boards and control boards are reported in companion papers published in these proceedings

  10. An active balance board system with real-time control of stiffness and time-delay to assess mechanisms of postural stability.

    Science.gov (United States)

    Cruise, Denise R; Chagdes, James R; Liddy, Joshua J; Rietdyk, Shirley; Haddad, Jeffrey M; Zelaznik, Howard N; Raman, Arvind

    2017-07-26

    Increased time-delay in the neuromuscular system caused by neurological disorders, concussions, or advancing age is an important factor contributing to balance loss (Chagdes et al., 2013, 2016a,b). We present the design and fabrication of an active balance board system that allows for a systematic study of stiffness and time-delay induced instabilities in standing posture. Although current commercial balance boards allow for variable stiffness, they do not allow for manipulation of time-delay. Having two controllable parameters can more accurately determine the cause of balance deficiencies, and allows us to induce instabilities even in healthy populations. An inverted pendulum model of human posture on such an active balance board predicts that reduced board rotational stiffness destabilizes upright posture through board tipping, and limit cycle oscillations about the upright position emerge as feedback time-delay is increased. We validate these two mechanisms of instability on the designed balance board, showing that rotational stiffness and board time-delay induced the predicted postural instabilities in healthy, young adults. Although current commercial balance boards utilize control of rotational stiffness, real-time control of both stiffness and time-delay on an active balance board is a novel and innovative manipulation to reveal balance deficiencies and potentially improve individualized balance training by targeting multiple dimensions contributing to standing balance. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Return to Galileo? The Inquisition of the International Narcotic Control Board.

    Science.gov (United States)

    Small, Dan; Drucker, Ernest

    2008-05-07

    Nearly 400 years after Galileo Galilei of Florence was arraigned and convicted of suspected heresy by the ten member Congregation of the Holy Office (Inquisition), the International Narcotic Control Board (INCB) is similarly inserting itself into matters pertaining to innovations in healthcare and the public health response to addiction throughout the world. Like that earlier Inquisition of 1633 that convicted Galileo of heresy for holding that the sun is the centre of the universe with the earth revolving around it (in contradiction to church doctrine of the time) the INCB and its thirteen-member panel, now rails against any evidence out of sync with the established doctrine of the war on drugs--particularly those innovations in public health called harm reduction. The latest healthcare and harm reduction practices to attract the ire of the INCB Inquisition are elements of Canada's most effective and innovative measures to minimize the harms of drugs in Vancouver--supervised injection facilities and, recently, the potential establishment of supervised inhalation rooms--along with the long established practice of providing safer mouthpieces for pulmonary inhalation in British Columbia. This is particularly significant as it comes in the midst of a crucial battle between municipal and provincial authorities in BC with the federal government in Ottawa, which seems determined to undermine all the most effective HR programs that are the result of years of steady local and governmental support in Vancouver and now threatens to derail all these programs and spread doubt about their usefulness despite the overwhelmingly positive findings of serous research.

  12. Return to Galileo? The Inquisition of the International Narcotic Control Board

    Directory of Open Access Journals (Sweden)

    Small Dan

    2008-05-01

    Full Text Available Abstract Nearly 400 years after Galileo Galilei of Florence was arraigned and convicted of suspected heresy by the ten member Congregation of the Holy Office (Inquisition, the International Narcotic Control Board (INCB is similarly inserting itself into matters pertaining to innovations in healthcare and the public health response to addiction throughout the world. Like that earlier Inquisition of 1633 that convicted Galileo of heresy for holding that the sun is the centre of the universe with the earth revolving around it (in contradiction to church doctrine of the time the INCB and its thirteen-member panel, now rails against any evidence out of sync with the established doctrine of the war on drugs – particularly those innovations in public health called harm reduction. The latest healthcare and harm reduction practices to attract the ire of the INCB Inquisition are elements of Canada's most effective and innovative measures to minimize the harms of drugs in Vancouver – supervised injection facilities and, recently, the potential establishment of supervised inhalation rooms – along with the long established practice of providing safer mouthpieces for pulmonary inhalation in British Columbia. This is particularly significant as it comes in the midst of a crucial battle between municipal and provincial authorities in BC with the federal government in Ottawa, which seems determined to undermine all the most effective HR programs that are the result of years of steady local and governmental support in Vancouver and now threatens to derail all these programs and spread doubt about their usefulness despite the overwhelmingly positive findings of serous research.

  13. Preparation, Mechanical and Thermal Properties of Cement Board with Expanded Perlite Based Composite Phase Change Material for Improving Buildings Thermal Behavior

    Directory of Open Access Journals (Sweden)

    Rongda Ye

    2015-11-01

    Full Text Available Here we demonstrate the mechanical properties, thermal conductivity, and thermal energy storage performance of construction elements made of cement and form-stable PCM-Rubitherm® RT 28 HC (RT28/expanded perlite (EP composite phase change materials (PCMs. The composite PCMs were prepared by adsorbing RT28 into the pores of EP, in which the mass fraction of RT28 should be limited to be no more than 40 wt %. The adsorbed RT28 is observed to be uniformly confined into the pores of EP. The phase change temperatures of the RT28/EP composite PCMs are very close to that of the pure RT28. The apparent density and compression strength of the composite cubes increase linearly with the mass fraction of RT28. Compared with the thermal conductivity of the boards composed of cement and EP, the thermal conductivities of the composite boards containing RT28 increase by 15%–35% with the mass fraction increasing of RT28. The cubic test rooms that consist of six boards were built to evaluate the thermal energy storage performance, it is found that the maximum temperature different between the outside surface of the top board with the indoor temperature using the composite boards is 13.3 °C higher than that of the boards containing no RT28. The thermal mass increase of the built environment due to the application of composite boards can contribute to improving the indoor thermal comfort and reducing the energy consumption in the buildings.

  14. Preparation, Mechanical and Thermal Properties of Cement Board with Expanded Perlite Based Composite Phase Change Material for Improving Buildings Thermal Behavior.

    Science.gov (United States)

    Ye, Rongda; Fang, Xiaoming; Zhang, Zhengguo; Gao, Xuenong

    2015-11-13

    Here we demonstrate the mechanical properties, thermal conductivity, and thermal energy storage performance of construction elements made of cement and form-stable PCM-Rubitherm® RT 28 HC (RT28)/expanded perlite (EP) composite phase change materials (PCMs). The composite PCMs were prepared by adsorbing RT28 into the pores of EP, in which the mass fraction of RT28 should be limited to be no more than 40 wt %. The adsorbed RT28 is observed to be uniformly confined into the pores of EP. The phase change temperatures of the RT28/EP composite PCMs are very close to that of the pure RT28. The apparent density and compression strength of the composite cubes increase linearly with the mass fraction of RT28. Compared with the thermal conductivity of the boards composed of cement and EP, the thermal conductivities of the composite boards containing RT28 increase by 15%-35% with the mass fraction increasing of RT28. The cubic test rooms that consist of six boards were built to evaluate the thermal energy storage performance, it is found that the maximum temperature different between the outside surface of the top board with the indoor temperature using the composite boards is 13.3 °C higher than that of the boards containing no RT28. The thermal mass increase of the built environment due to the application of composite boards can contribute to improving the indoor thermal comfort and reducing the energy consumption in the buildings.

  15. An interface board for developing control loops in power electronics based on microcontrollers and DSPs Cores -Arduino /ChipKit /dsPIC /DSP /TI Piccolo

    DEFF Research Database (Denmark)

    Pittini, Riccardo; Zhang, Zhe; Andersen, Michael A. E.

    2013-01-01

    and development environment. Moreover, the interface board can operate with open hardware Arduino-like boards such as the ChipKit Uno32. The paper also describes how to enhance the performance of a ChipKit Uno32 with a dsPIC obtaining a more suitable solution for power electronics. The basic blocks and interfaces...... of the boards are presented in detail as well as the board main specifications. The board operation has been tested with three core platforms: TI Piccolo controlSTICK, a Microchip dsPIC and a ChipKit Uno32 (Arduino-like platform). The board was used for generating test signals for characterizing 1200 V Si...

  16. The Disproportionate Erosion of Local Control: Urban School Boards, High-Stakes Accountability, and Democracy

    Science.gov (United States)

    Trujillo, Tina M.

    2013-01-01

    This case study of an urban school board's experiences under high-stakes accountability demonstrates how the district leaders eschewed democratic governance processes in favor of autocratic behaviors. They possessed narrowly defined goals for teaching and learning that emphasized competitive, individualized means of achievement. Their decision…

  17. A Dual Digital Signal Processor VME Board for Instrumentation and Control Applications

    International Nuclear Information System (INIS)

    H. Dong; R. Flood; C. Hovater; J. Musson

    2001-01-01

    A Dual Digital Signal Processing VME Board is being developed for the CEBAF Beam Current Monitor system at Jefferson Lab. It is a versatile general-purpose digital signal processing board using an open architecture, which allows for adaptation to various applications. The base design uses two independent Texas Instrument (TI) TMS320C6711, which are 900 MFLOPS floating-point digital signal processors (DSP). Applications that require a fixed point DSP can be implemented by replacing the baseline DSP with the pin-for-pin compatible TMS320C6211. Both parallel and serial protocols have been implemented for communicating with off board devices. The initial implementation makes use of TI Multi-channel Serial protocol and VME bus protocol. Other communication protocols can be implemented by reprogramming the FPGA. Each DSP is equipped with FLASH PROM and SDRAM for program and data storage. Additionally, each DSP has 16 bits of digital I/O, two digital analog converters, and two analog to digital converters. Dual 160 pins mezzanine connectors provide expansion capability without design modifications. The mezzanine interface conforms to the TI Expansion Daughter Card Interface standard. The design can be manufactured with a reduced chip set without redesigning the printed circuit board. For example, it can be implemented as a single-channel DSP with no analog I/O. The board supports JTAG 1149 boundary scan to facilitate testing, debugging, and programming. It is fully programmable using software development tools such as TI Code Composer Studio and a JTAG emulator such as Spectrum Digital DS510PP-PLUS. Using these tools allows one program the flash memory and FPGA through the JTAG ports, thus eliminating the need for a separate ROM/FPGA programmer. This work supported by U.S. DOE Contract No. DE-AC05-84ER40150

  18. Dosimetric control on board the MIR space station during the solar proton events of September-October 1989

    International Nuclear Information System (INIS)

    Benghin, V.V.; Petrov, V.M.; Chernykh, I.V.; Teltsov, M.V.; Shumshurov, V.I.

    1992-01-01

    A set of dosimetric units for the control of radiation doses to cosmonauts on board the MIR space station contains an active dosimeter R-16 and a personal display dosimeter IPD-2. During the powerful solar proton events (SPE) in September-October 1989, the readings of these devices were used for the control of the crew's radiation damage. Results of the dose measurements and analysis of the dynamics caused by some heliogeophysical factors are given. It is shown that the total doses from SPE registered by the dosimeters R-16 and IPD-2 were 3.6 x 10 -2 and 0.9 x 10 -2 Gy, respectively. (author)

  19. Description of how the Atomic Energy Control Board research and development program is administered

    International Nuclear Information System (INIS)

    1985-06-01

    The Regulatory Research Program should be seen as augmenting and extending the capability of in-house resources. The overall objective of the research program is to produce pertinent and independent information that will assist the Board and its staff in making correct, timely and credible decisions on regulating atomic energy. Within the framework of the general objective, the specific objectives are: (i) to verify information, claims or analyses from licensees in support of licensing actions; (ii) to fill gaps in knowledge to enable the Board to contribute to the establishment of health and safety requirements or guidelines or to aid in arriving at licensing decisions; (iii) to stimulate licensees to do more work on certain topics relating to health, safety or security; (iv) to develop information on the regulatory process and the evaluation of the regulatory process; (v) to develop equipment or procedures to enhance health, safety or security in those cases where the industry is not competent or inclined to do so; and (vi) to enhance the competence of the Board and its credibility in the eyes of licensees and the public

  20. Notification: FY 2017 Update of Proposed Key Management Challenges and Internal Control Weaknesses Confronting the U.S. Chemical Safety and Hazard Investigation Board

    Science.gov (United States)

    Jan 5, 2017. The EPA OIG is beginning work to update for fiscal year 2017 its list of proposed key management challenges and internal control weaknesses confronting the U.S. Chemical Safety and Hazard Investigation Board (CSB).

  1. An Improved PID Algorithm Based on Insulin-on-Board Estimate for Blood Glucose Control with Type 1 Diabetes.

    Science.gov (United States)

    Hu, Ruiqiang; Li, Chengwei

    2015-01-01

    Automated closed-loop insulin infusion therapy has been studied for many years. In closed-loop system, the control algorithm is the key technique of precise insulin infusion. The control algorithm needs to be designed and validated. In this paper, an improved PID algorithm based on insulin-on-board estimate is proposed and computer simulations are done using a combinational mathematical model of the dynamics of blood glucose-insulin regulation in the blood system. The simulation results demonstrate that the improved PID algorithm can perform well in different carbohydrate ingestion and different insulin sensitivity situations. Compared with the traditional PID algorithm, the control performance is improved obviously and hypoglycemia can be avoided. To verify the effectiveness of the proposed control algorithm, in silico testing is done using the UVa/Padova virtual patient software.

  2. Reproducibility and validity of the Nintendo Wii Balance Board for measuring shoulder sensorimotor control in prone lying

    DEFF Research Database (Denmark)

    Eshøj, Henrik; Juul-Kristensen, Birgit; Gam Bender Jørgensen, René

    2017-01-01

    INTRODUCTION: For the lower limbs, the Nintendo Wii Balance Board (NWBB) has been widely used to measure postural control. However, this has not been performed for upper limb measurements. Further, the NWBB has shown to produce more background noise with decreasing loads, which may be of concern...... when used for upper limb testing. The aim was to investigate reproducibility and validity of the NWBB. METHODS: A test-retest design was performed with 68 subjects completing three different prone lying, upper limb weight-bearing balance tasks on a NWBB: two-arms, eyes closed (1) one-arm, non...

  3. [A study on comparison of learning effects between a board game and a lecture about infection control].

    Science.gov (United States)

    Kawamura, Hitomi; Kishimoto, Keiko; Matsuda, Toshiyuki; Fukushima, Noriko

    2014-01-01

      In order to provide an opportunity for community pharmacists to actively learn about infection control, this study created learning materials through a board game format and verified characteristics of learning by determining and comparing evaluation according to viewpoint and motivational effects between a lecture and the game. To create the board game, we collected cases of infection from 30 community pharmacists. The game was created using collected and created case studies, and we held a workshop on infection control. Participants were assigned to a lecture (n=32) or game group (n=27) and completed a questionnaire before and after the workshop. The questionnaire included the evaluation according to viewpoint based on the ministry's curriculum guidelines and the motivational effect of Keller's ARCS motivation model. In the evaluation according to viewpoint, the lecture group scores were significantly higher on "knowledge and understanding" than the game group scores. In the comparison of the motivational effects, the game group was significantly higher in three out of the four items of the ARCS motivation model, "Attention", "Relevance", and "Satisfaction". These results indicate that learning through the game aroused the curiosity of the learners, increased the learning outcome, and maintained certain levels of motivation. In addition, the evaluation according to viewpoint showed that the lecture group understood the key concepts and knowledge regarding infection control, whereas there was a possibility that the game group required additional motivational factors for learning and maintaining motivation level.

  4. Design of a one-chip board microcontrol unit for active vibration control of a naval ship mounting system

    International Nuclear Information System (INIS)

    Oh, Jong-Seok; Choi, Seung-Bok; Han, Young-Min; Nguyen, Vien-Quoc; Moon, Seok-Jun

    2012-01-01

    This work presents an experimental implementation of a user-tunable one-chip board microcontrol unit which is specifically designed for vibration control of the active mounting system for naval ships. The proposed mounting system consists of four active mounts supporting vibration-sensitive equipment. Each active mount constitutes a rubber element, an inertial mass and the piezostack actuator. It is designed for particular applications that require effective isolation performance against wide frequency ranges, such as naval ship equipment. After describing the configuration of the active mount, dynamic characteristics of the rubber element and the piezostack actuator are experimentally identified. Accordingly, the proposed mounting system is constructed and the governing equations of motion are formulated. In order to attenuate the unwanted vibrations transferred from the upper mass, a feedforward controller with fast Fourier algorithm is designed and experimentally realized using the one-chip microcontrol board which is specially made for this practical application. In order to evaluate the performance of the one-chip microcontrol unit, vibration control results of the proposed active mounting system are presented in the frequency domain. (technical note)

  5. Board of Directors or Supervisory Board

    DEFF Research Database (Denmark)

    Werlauff, Erik

    2009-01-01

    The article analyses the legal consequences of the choice now available to Danish public limited companies, which can now opt for a two-tier management structure, in which the management board undertakes both the day-to-day and the overall management, while a supervisory board exercises control...... over the management board, including its appointment and dismissal. The article considers which companies a two-tier structure may be relevant for, and reviews the consequences for the composition, election and functioning of the company organs....

  6. Adaptive change in corporate control practices.

    Science.gov (United States)

    Alexander, J A

    1991-03-01

    Multidivisional organizations are not concerned with what structure to adopt but with how they should exercise control within the divisional form to achieve economic efficiencies. Using an information-processing framework, I examined control arrangements between the headquarters and operating divisions of such organizations and how managers adapted control practices to accommodate increasing environmental uncertainty. Also considered were the moderating effects of contextual attributes on such adaptive behavior. Analyses of panel data from 97 multihospital systems suggested that organizations generally practice selective decentralization under conditions of increasing uncertainty but that organizational age, dispersion, and initial control arrangements significantly moderate the direction and magnitude of such changes.

  7. Parameter design for a phase change material board installed on the inner surface of building exterior envelopes for cooling in China

    International Nuclear Information System (INIS)

    Sun, Xiaoqin; Zhang, Quan; Medina, Mario A.; Lee, Kyoung Ok; Liao, Shuguang

    2016-01-01

    Highlights: • Phase change material (PCM) boards were simulated in building envelopes. • The buildings were located in four cities with different climatic conditions. • Energy and mass efficiency was proposed to evaluate utilization of PCM board. • The optimal melting temperature increased with increasing mean air temperature. - Abstract: Phase change materials (PCMs) can be used for building envelope thermal management and for energy conservation because of their potential to absorb and release large amounts of heat with small wall temperature variations. In this paper, the heat transfer theory of a PCM board used for building envelopes is presented, together with a mathematical model based on the moving heat-source method. It was found that the model accurately predicted the position of the solid–liquid interface in time and space, comparing with the published data. Energy and mass efficiency (EME) was proposed to evaluate the energy efficiency of PCM boards in office buildings located in various climatic regions in China for cooling. The influences on EME of parameters, including melting temperature of PCM, PCM board thickness and the heat transfer coefficient of building envelope, were analyzed. The optimal melting temperatures of PCM board, which resulted in the peak EME, in office building were 24.1 °C in Shenyang, 25.0 °C in Kunming, 25.3 °C in Zhengzhou and 25.5 °C Changsha, respectively. The EME increased with the increasing heat transfer coefficient of building envelope. For the city of Changsha with higher outdoor air temperature, none of the PCM boards modeled contributed effectively.

  8. Development of an ATCA IPMI controller mezzanine board to be used in the ATCA developments for the ATLAS Liquid Argon upgrade

    CERN Document Server

    Dumont Dayot, N

    2012-01-01

    In the context of the LHC upgrades, a new Read-Out Driver (ROD) board for the ATLAS LAr calorimeter is being developed. xTCA (Advanced/Micro Telecom Computing Architecture) is becoming a standard in high energy physics and is a serious candidate for future readout systems. We will present our current developments to master ATCA and to integrate a large number of very high speed links (96 links/8.5 Gbps) on a ROD Evaluator ATCA board. To manage our ROD Evaluator, we have developed a versatile ATCA IPMI controller for ATCA boards which is FPGA Mezzanine Card (FMC) compliant.

  9. Development of an ATCA IPMI Controller Mezzanine Board to be used in the ATCA developments for the ATLAS Liquid Argon upgrade

    CERN Document Server

    "LETENDRE, N; The ATLAS collaboration

    2011-01-01

    In the context of the LHC upgrades, a new Read-Out Driver (ROD) board for the ATLAS LAr calorimeter is being developed. xTCA (Advanced/Micro Telecom Computing Architecture) is becoming a standard in high energy physics and is a serious candidate for future readout systems. We will present our current developments to master ATCA and to integrate a large number of very high speed links (96 links/8.5 Gbps) on a ROD Evaluator ATCA board. To manage our ROD Evaluator, we have developed a versatile ATCA IPMI controller for ATCA boards which is FPGA Mezzanine Card (FMC) compliant.

  10. Optimal replacement and inspection periods of safety and control boards in Wolsung nuclear power plant unit 1

    International Nuclear Information System (INIS)

    Mok, Jin Il

    1993-02-01

    In nuclear power plants, the safety and control systems are important for operating and maintaining safety of nuclear power plants. Due to the failure of the instrument and control devices of nuclear power plants caused by aging, nuclear power plants occasionally trip. Since the start of first commercial operation of Kori nuclear power plant (NPP) unit 1, the trips caused by instrument and control systems account for 28% of total trips of NPPs in Korea. Even a single trip of a nuclear power plant causes an extravagant economical loss and deteriorates public acceptance of nuclear power plants. Therefore, the replacement of the instrument and control devices with proper consideration of the aging effect is necessary in order to prevent the inadvertent trip. In this work we investigated the optimal replacement periods of the digital control computer's (DCC) and the programmable digital comparator's (PDC) electronic circuit boards of Wolsung nuclear power plant Unit 1. We first derived mathematical models which calculate optimal replacement periods for electronic circuit boards of digital control computer (DCC) and for those of the programmable digital comparator (PDC) in Wolsung NPP unit 1. And we analytically obtained the optimal replacement periods of electronic circuit boards by using these models. We compared these periods with the replacement periods currently used at Wolsung NPP Unit. The periods used at Wolsung is not based on mathematical analysis, but on empirical knowledge. As a consequence, the optimal replacement periods analytically obtained for the electronic circuit boards of DCC and those used in the field shown small difference : the optimal replacement periods analytically obtained for the electronic circuit boards of PDC are shorter than those used in the field in general. The engineered safeguards of Wolsung nuclear power plant unit 1 contains redundant systems of 2-out-of-3 logic which are not operating under normal conditions but they are called

  11. Information technology and the board of directors.

    Science.gov (United States)

    Nolan, Richard; McFarlan, F Warren

    2005-10-01

    Ever since the Y2K scare, boards have grown increasingly nervous about corporate dependence on information technology. Since then, computer crashes, denial of service attacks, competitive pressures, and the need to automate compliance with government regulations have heightened board sensitivity to IT risk. Unfortunately, most boards remain largely in the dark when it comes to IT spending and strategy, despite the fact that corporate information assets can account for more than 50% of capital spending. A lack of board oversight for IT activities is dangerous, the authors say. It puts firms at risk in the same way that failing to audit their books would. Companies that have established board-level IT governance committees are better able to control IT project costs and carve out competitive advantage. But there is no one-size-fits-all model for board supervision of a company's IT operations. The correct approach depends on what strategic "mode" a company is in whether its operations are extremely dependent on IT or not, and whether or not it relies heavily on keeping up with the latest technologies. This article spells out the conditions under which boards need to change their level of involvement in IT decisions, explaining how members can recognize their firms' IT risks and decide whether they should pursue more aggressive IT governance. The authors delineate what an IT governance committee should look like in terms of charter, membership, duties, and overall agenda. They also offer recommendations for developing IT policies that take into account an organization's operational and strategic needs and suggest what to do when those needs change. Given the dizzying pace of change in the world of IT, boards can't afford to ignore the state of their IT systems and capabilities. Appropriate board governance can go a long way toward helping a company avoid unnecessary risk and improve its competitive position.

  12. Autonomous Control, Climate and Environmental Changes Effects ...

    African Journals Online (AJOL)

    Autonomous Control, Climate and Environmental Changes Effects on Trypanosomiasis in Sub-Saharan Africa: A Review. ... African trypanosomiasis is a parasitic disease that causes serious economic losses in livestock due to anemia, loss of condition and emaciation. The disease when neglected is lethal and untreated ...

  13. Changing Throwing Pattern: Instruction and Control Parameter

    Science.gov (United States)

    Southard, Dan

    2006-01-01

    The purpose of this study was to determine the effects of instruction and scaling up a control parameter (velocity of throw) on changes in throwing pattern. Sixty adult female throwers (ages 20-26 years) were randomly placed into one of four practice conditions: (a) scale up on velocity with no instruction, (b) maintain constant velocity with no…

  14. Fit to father? Online accounts of lifestyle changes and help-seeking on a male infertility board.

    Science.gov (United States)

    Hanna, Esmée; Gough, Brendan; Hudson, Nicky

    2018-04-06

    The reproductive realm is routinely viewed as a feminised space requiring women's commitment and labour. By contrast, men's procreative contributions and 'reproductive masculinity' is represented as unproblematic, with men assumed to be fertile across the lifespan. Recent scientific research has, however, cast doubt over these longstanding assumptions, suggesting that a link does exist between 'lifestyle' factors and male fertility. The notion that fertility can be improved with effort (for both women and men) can be located within wider cultural and political shifts which construct individuals as increasingly responsible for acting on health messages and engaging in self-disciplining body projects. Through an exploration of 'lifestyle changes' within a men's online infertility discussion forum board, this paper examines how discourses of individualisation healthism and masculinity are reproduced and interlinked. Our thematic analysis indicates that 'lifestyle work' is construed as crucial for achieving conception - and as a means to demonstrate men's commitment to the dyadic goal of parenthood, which in turn may challenge and extend previous notions of 'reproductive masculinity'. © 2018 Foundation for the Sociology of Health & Illness.

  15. Disposing and recycling waste printed circuit boards: disconnecting, resource recovery, and pollution control.

    Science.gov (United States)

    Wang, Jianbo; Xu, Zhenming

    2015-01-20

    Over the past decades, China has been suffering from negative environmental impacts from distempered e-waste recycling activities. After a decade of effort, disassembly and raw materials recycling of environmentally friendly e-waste have been realized in specialized companies, in China, and law enforcement for illegal activities of e-waste recycling has also been made more and more strict. So up to now, the e-waste recycling in China should be developed toward more depth and refinement to promote industrial production of e-waste resource recovery. Waste printed circuit boards (WPCBs), which are the most complex, hazardous, and valuable components of e-waste, are selected as one typical example in this article that reviews the status of related regulations and technologies of WPCBs recycling, then optimizes, and integrates the proper approaches in existence, while the bottlenecks in the WPCBs recycling system are analyzed, and some preliminary experiments of pinch technologies are also conducted. Finally, in order to provide directional guidance for future development of WPCBs recycling, some key points in the WPCBs recycling system are proposed to point towards a future trend in the e-waste recycling industry.

  16. Board game

    International Nuclear Information System (INIS)

    Brennan, N.S.

    1982-01-01

    A board game comprises a board, a number of counters and two dice. The board is marked to provide a central area, representing the nucleus of an atom, and six or more annular rings extending concentrically around the central area, the rings being divided into 2,8,18,32,48 and 72 squares. Each ring represents an electron shell, and some of the squares are numbered, the number representing the atomic number of different elements. (author)

  17. Development and validation process of the advanced main control board for next Japanese PWR plants

    International Nuclear Information System (INIS)

    Tani, M.; Ito, K.; Yokoyama, M.; Imase, M.; Okamoto, H.

    2000-01-01

    The purpose of main control room improvement is to reduce operator workload and potential human errors by offering a better working environment where operators can maximize their abilities. Japanese pressurized water reactor (PWR) utilities and Mitsubishi group have developed a touch -screen-based main control console (i.e. advanced main control room) the next generation PWRs to further improve the plant operability using a state of the art electronics technology. The advanced main control room consists of an operator console, a supervisor console and large display panels. The functional specifications were evaluated by utility operators using a prototype main control console connected to a plant simulator. (author)

  18. 77 FR 4560 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-01-30

    ... Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C... bank holding company. The factors that are considered in acting on the notices are set forth in... Shattuck, Oklahoma. Board of Governors of the Federal Reserve System, January 24, 2012. Jennifer J. Johnson...

  19. 76 FR 67454 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2011-11-01

    ... Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C... bank holding company. The factors that are considered in acting on the notices are set forth in... Reserve System, October 27, 2011. Jennifer J. Johnson, Secretary of the Board. [FR Doc. 2011-28269 Filed...

  20. 77 FR 8258 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-02-14

    ... Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C... bank holding company. The factors that are considered in acting on the notices are set forth in... Governors of the Federal Reserve System, February 9, 2012. Jennifer J. Johnson, Secretary of the Board. [FR...

  1. 77 FR 26280 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-05-03

    ... Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C... bank holding company. The factors that are considered in acting on the notices are set forth in... Governors of the Federal Reserve System, April 30, 2012. Jennifer J. Johnson, Secretary of the Board. [FR...

  2. 77 FR 42312 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-07-18

    ... Holding Company The notificants listed below have applied under the Change in Bank Control Act (12 U.S.C... bank holding company. The factors that are considered in acting on the notices are set forth in... Lynnwood, Washington. Board of Governors of the Federal Reserve System, July 13, 2012. Jennifer J. Johnson...

  3. Training change control process at Cernavoda NPP

    International Nuclear Information System (INIS)

    Valache, Cornelia Mariana

    2005-01-01

    The paper presents the process of 'Training Change Control' at Cernavoda NPP. This process is a systematic approach that allows determination of the most effective training and/or non-training solutions for challenges that may influence the content and conditions for a training program or course. Changes may be the result of: - response to station systems or equipment modifications; - new or revised procedures; - regulatory requirements; - external organizations requirements; - internal evaluations meaning feedback from trainees, trainers, management or post-training evaluations; - self-assessments; - station condition reports; - operating experience (OPEX); - modifications of job scope; - management input. The Training Change Control Process at Cernavoda NPP includes the following aspects. The first step is the identification of all the initiating factors for a potential training change. Then, retain only those, which could have an impact on training and classify them in two categories: as deficiencies or as enhancement suggestions. The process is different for the two categories. The deficiency category supposes the application of the Training Needs Analysis (TNA) process. This is a performance-oriented process, resulting in more competent employees, solving existing and potential performance problems. By using needs analysis to systematically determine what people or courses and programs are expected to do and gathering data to reveal what they are really doing, we can receive a clear picture of the problem and then we can establish corrective action plans to fix it. The process is supported by plant subjects matter and by training specialists. On the other hand, enhancements suggestions are assessed by designated experienced persons and then are implemented in the training process. Regarding these two types of initiating factors for the training change control process, the final result consists of a training improvement, raising the effectiveness, efficiency or

  4. Reproducibility and validity of the Nintendo Wii Balance Board for measuring shoulder sensorimotor control in prone lying.

    Science.gov (United States)

    Eshoj, H; Juul-Kristensen, Birgit; Jørgensen, Rene Gam Bender; Søgaard, Karen

    2017-02-01

    For the lower limbs, the Nintendo Wii Balance Board (NWBB) has been widely used to measure postural control. However, this has not been performed for upper limb measurements. Further, the NWBB has shown to produce more background noise with decreasing loads, which may be of concern when used for upper limb testing. The aim was to investigate reproducibility and validity of the NWBB. A test-retest design was performed with 68 subjects completing three different prone lying, upper limb weight-bearing balance tasks on a NWBB: two-arms, eyes closed (1) one-arm, non-dominant/non-injured (2) and one-arm, dominant/injured (3). Each task was repeated three times over the course of two test sessions with a 30-min break in between. Further, the level of background noise from a NWBB was compared with a force platform through systematic loading of both boards with increasing deadweights ranging from 5 to 90kg. Test-retest reproducibility was high with ICCs ranging from 0.95 to 0.97 (95% CI 0.92 to 0.98). However, systematic bias and tendencies for funnel effects in the Bland Altman plots for both one-armed tests were present. The concurrent validity of the NWBB was low (CCC 0.17 (95% CI 0.12-0.22)) due to large differences between the NWBB and force platform in noise sensitivity at low deadweights (especially below 50kg). The NWBB prone lying, shoulder sensorimotor control test was highly reproducible. Though, concurrent validity of the NWBB was poor compared to a force platform. Further investigation of the impact of the background noise, especially at low loads, is needed. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. Design and Experimentation of a Control System Implemented on Raspberry Pi 3 Board for Photovoltaic Systems Using SEPIC Converter

    Directory of Open Access Journals (Sweden)

    Mohamed Boutouba

    2017-12-01

    Full Text Available In this paper, a voltage regulation system is proposed for photovoltaic energy sources (PV, using Single-Ended Primary Inductance Converter as a DC-DC converter to feed loads working with specific input voltage. The choose of SEPIC converter is due to the output voltage ripple of developed-type converters are usually small and can be lower than 2%, also it considered as a buck and boost converter and thereafter loads with lower or higher voltage could be powered. Matlab Simulink is used as environment to develop control strategies to guaranties a stable voltage at the loads terminals. Two algorithms are used to fulfill this role: A Conventional PID and PI-Fuzzy logic controller to generate the PWM signal for the SEPIC converter. Hence, to validate the work some real-time simulations are treated by implemented the control strategies on a low-cost control board: The Raspberry Pi 3 in order to manage the operation of system and collecting the simulation data. Also, and for verification purposes, several simulations were treated to verify the good behavior of the proposed system.

  6. Life cycle inventory analysis of regenerative thermal oxidation of air emissions from oriented strand board facilities in Minnesota - a perspective of global climate change

    Energy Technology Data Exchange (ETDEWEB)

    Nicholson, W.J. [Potlatch Corp., San Francisco, CA (United States)

    1997-12-31

    Life cycle inventory analysis has been applied to the prospective operation of regenerative thermal oxidation (RTO) technology at oriented strand board plants at Bemidji (Line 1) and Cook, Minnesota. The net system destruction of VOC`s and carbon monoxide, and at Cook a small quantity of particulate, has a very high environmental price in terms of energy and water use, global warming potential, sulfur and nitrogen oxide emissions, solids discharged to water, and solid waste deposited in landfills. The benefit of VOC destruction is identified as minor in terms of ground level ozone at best and possibly slightly detrimental. Recognition of environmental tradeoffs associated with proposed system changes is critical to sound decision-making. There are more conventional ways to address carbon monoxide emissions than combustion in RTO`s. In an environment in which global warming is a concern, fuel supplemental combustion for environmental control does not appear warranted. Consideration of non-combustion approaches to address air emission issues at the two operations is recommended. 1 ref., 5 tabs.

  7. 78 FR 64505 - Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC)

    Science.gov (United States)

    2013-10-29

    ... Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC) In accordance with... reviews progress toward injury prevention goals and provides evidence in injury prevention- related... matters, including the: (1) Review of extramural research concepts for funding opportunity announcements...

  8. Effects on the Treatments in Physical Therapy with the Wii Fit Plus Balance Board Concerning the Postural Changes on Children Suffering Spastics Hemiparesis. Case Report

    Directory of Open Access Journals (Sweden)

    Luisa Fernanda Córdoba Castillo

    2015-05-01

    Full Text Available Introduction: This study tried to determine the effects on the treatments in physical therapy with the Wii Balance Board and Wii Fit Plus __both of Wii, Nintendo Company Limited__ concerning the postural changes on children suffering spastics hemiparesis. Material and methods: Longitudinal cohort case studies done with two children, from the municipality of Popayán, suffering cerebral palsy type spastic hemiparesis. This children had a test on static posture with the software APIC v. 2.0, previously, It was executed an exercises program using Wii Fit plus Balance Board for 20 sessions. Results: Both of the patients had remarkable changes on lateralization of the center of gravity. This change can subserve the postural changes later. Conclusions: The application of the game with Wii Fit Plus with Wii Balance Board in physical therapy is a useful alternative in rehabilitation of hemi paretic patients related to a better distribution of the center of gravity. It is advisable to avoid weight overload and compensations.

  9. Board effectiveness: Investigating payment asymmetry between board members and shareholders

    Directory of Open Access Journals (Sweden)

    Wuchun Chi

    2008-01-01

    Full Text Available Board members may well be responsible for dissension between themselves and shareholders since they are simultaneously the setters and receivers of both board remuneration and dividends. They may act out of their own personal interests at the expense of external shareholders. We investigate the impact of ownership structure, board structure and control deviation on payment asymmetry, where excessively high remuneration is paid to board members but considerably lower dividends are distributed to shareholders. We find strong evidence confirming that the smaller the shareholdings of board members and outside blockholders are, the more asymmetric the payments are. With controlling family members on the board and a higher percentage of seats held by independent board members, there is a slight reduction in the likelihood and severity of payment asymmetry. In addition, it is abundantly clear that the larger the board seat-control deviation is, the greater is the likelihood and severity of payment asymmetry. While prior research has primarily focused on board-manager agency issues, the board-shareholder perspective could be even more important in that it is the board that is the most directly delegated agent of shareholders, not the managers

  10. SIMCON 3.1. LLRF system control board measurements (for TESLA Test Facility)

    International Nuclear Information System (INIS)

    Pietrasik, R.

    2006-03-01

    The SIMCON control systems for superconducting cavity resonators are described. These systems consist of analog and digital I/O systems, a clock system, an Ethernet link, optical input systems, a RS232 interface, a VME section with booting FPGA devices, and a Virtex2Pro section. The measurements of different parameters by this system are described. (HSI)

  11. Controlling maximum evaluation duration in on-line and on-board evolutionary robotics

    NARCIS (Netherlands)

    Atta-ul-Qayyum, A.; Nedev, D.G.; Haasdijk, E.W.

    2014-01-01

    On-line evolution of robot controllers allows robots to adapt while they perform their proper tasks. In our investigations, robots contain their own self-sufficient evolutionary algorithm (known as the encapsulated approach) where individual solutions are evaluated by means of a time sharing scheme:

  12. SIMCON 3.1. LLRF system control board measurements (for TESLA Test Facility)

    Energy Technology Data Exchange (ETDEWEB)

    Pietrasik, R.

    2006-07-15

    The SIMCON control systems for superconducting cavity resonators are described. These systems consist of analog and digital I/O systems, a clock system, an Ethernet link, optical input systems, a RS232 interface, a VME section with booting FPGA devices, and a Virtex2Pro section. The measurements of different parameters by this system are described. (HSI)

  13. The place of human-factors in the work of the Atomic Energy Control Board

    International Nuclear Information System (INIS)

    Barkow, B.

    1982-01-01

    The AECB do not effectively regulate human factors in nuclear power plants since they have no staff trained to do so. Two new positions are recommended and their activities are outlined. Special problems are identified in the certification of personnel, management information control, and in accommodating human factors to AECB style

  14. Strategy for Migration of Traditional to Hybrid Control Boards in a Nuclear Power Plant

    Energy Technology Data Exchange (ETDEWEB)

    Boring, Ronald Laurids [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey Clark [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ulrich, Thomas Anthony [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-07-01

    This strategy document describes the NUREG-0711 based human factors engineering (HFE) phases and associated elements required to support design, verification and validation (V&V), and implementation of new digital control room elements in a legacy analog main control room (MCR). Information from previous planning and analysis work serves as the foundation for creating a human-machine interface (HMI) specification for distributed control systems (DCSs) to be implemented as part of nuclear power plant (NPP) modernization. This document reviews ways to take the HMSI specification and use it when migrating legacy displays or designing displays with new functionality. These displays undergo iterative usability testing during the design phase and then an integrated system validation (ISV) in the full-scope control room training simulator. Following successful demonstration of operator performance using the systems during the ISV, the new DCS is implemented at the plant, first in the training simulator and then in the MCR. This document concludes with a sample project plan, including a 15-month timeline from DCS design through implementation. Included is a discussion of how the U.S. Department of Energy’s Human System Simulation Laboratory (HSSL) can be used to support design and V&V activities. This report completes a Level 4 (M4) milestone under the U.S. Department of Energy’s (DOE’s) Light Water Reactor Sustainability (LWRS) Program.

  15. Assisting People with Disabilities to Actively Improve Their Collaborative Physical Activities with Nintendo Wii Balance Boards by Controlling Environmental Stimulation

    Science.gov (United States)

    Shih, Ching-Hsiang; Chen, Ling-Che; Shih, Ching-Tien

    2012-01-01

    The latest researches have adopted software technology to modify the Nintendo Wii Balance Board functionality and used it to enable two people with developmental disabilities to actively perform physical activities. This study extended the latest research of the Wii Balance Board application to assess whether four people (two groups) with…

  16. A study on the real-time reliability of on-board equipment of train control system

    Science.gov (United States)

    Zhang, Yong; Li, Shiwei

    2018-05-01

    Real-time reliability evaluation is conducive to establishing a condition based maintenance system for the purpose of guaranteeing continuous train operation. According to the inherent characteristics of the on-board equipment, the connotation of reliability evaluation of on-board equipment is defined and the evaluation index of real-time reliability is provided in this paper. From the perspective of methodology and practical application, the real-time reliability of the on-board equipment is discussed in detail, and the method of evaluating the realtime reliability of on-board equipment at component level based on Hidden Markov Model (HMM) is proposed. In this method the performance degradation data is used directly to realize the accurate perception of the hidden state transition process of on-board equipment, which can achieve a better description of the real-time reliability of the equipment.

  17. TUEV (Technical Control Board) of Rhineland-Westphalia. Annual report 1986

    International Nuclear Information System (INIS)

    1987-01-01

    This annual report of the RW TUEV for 1986 mainly deals with the subject fields of safety engineering, power technology, and environmental protection. Information on tasks and organisation is followed by a more detailed survey of the activities in the subject fields: Steam and pressure technology; material testing; strength and manufacturing control; nuclear energy and radiation protection; pipelines and hazardous substances; environmental protection; mining engineering; electrical and power engineering; equipment safety; construction and conveying engineering; motor vehicle egineering; psychological and medical fields of work; occupational safety; data processing and process automation. The report concludes with the annual financial statements and a list of addresses of the main office and other departments. (HSCH) [de

  18. Crisis prevention: how to gear up your board.

    Science.gov (United States)

    Salmon, W J

    1993-01-01

    Today's critics of corporate boardrooms have plenty of ammunition. The two crucial responsibilities of boards-oversight of long-term company strategy and the selection, evaluation, and compensation of top management--were reduced to damage control during the 1980s. Walter Salmon, a longtime director, notes that while boards have improved since he began serving on them in 1961, they haven't kept pace with the need for real change. Based on over 30 years of boardroom experience, Salmon recommends against government reform of board practices. But he does prescribe a series of incremental changes as a remedy. To begin with, he suggests limiting the size of boards and increasing the number of outside directors on them. In fact, according to Salmon, only three insiders belong on a board: the CEO, the COO, and the CFO. Changing how committees function is also necessary for gearing up today's boards. The audit committee, for example, can periodically review "high-exposure areas" of a business, perhaps helping to prevent embarrassing drops in future profits. Compensation committees can structure incentive compensation for executives to emphasize long-term rather than short-term performance. And nominating committees should be responsible for finding new, independent directors--not the CEO. In general, boards as a whole must spot problems early and blow the whistle, exercising what Salmon calls, "constructive dissatisfaction." On a revitalized board, directors have enough confidence in the process to vigorously challenge one another, including the company's chief executive.

  19. Control Board Digital Interface Input Devices – Touchscreen, Trackpad, or Mouse?

    Energy Technology Data Exchange (ETDEWEB)

    Thomas A. Ulrich; Ronald L. Boring; Roger Lew

    2015-08-01

    The authors collaborated with a power utility to evaluate input devices for use in the human system interface (HSI) for a new digital Turbine Control System (TCS) at a nuclear power plant (NPP) undergoing a TCS upgrade. A standalone dynamic software simulation of the new digital TCS and a mobile kiosk were developed to conduct an input device study to evaluate operator preference and input device effectiveness. The TCS software presented the anticipated HSI for the TCS and mimicked (i.e., simulated) the turbine systems’ responses to operator commands. Twenty-four licensed operators from the two nuclear power units participated in the study. Three input devices were tested: a trackpad, mouse, and touchscreen. The subjective feedback from the survey indicates the operators preferred the touchscreen interface. The operators subjectively rated the touchscreen as the fastest and most comfortable input device given the range of tasks they performed during the study, but also noted a lack of accuracy for selecting small targets. The empirical data suggest the mouse input device provides the most consistent performance for screen navigation and manipulating on screen controls. The trackpad input device was both empirically and subjectively found to be the least effective and least desired input device.

  20. Agreement Between the Board of Control of Ferris State College, Big Rapids, Michigan and The Ferris Faculty Association - MEA-NEA 1973-75.

    Science.gov (United States)

    Ferris State Coll., Big Rapids, MI.

    This agreement between the Board of Control of Ferris State College and the Ferris Faculty Association--MEA-NEA covers the period 1973-75. Sections of the agreement cover the basic contractual provisions, rights of the association, faculty rights, administrative responsibilities, promotions and transfers, teaching conditions, retrenchment,…

  1. A Standing Location Detector Enabling People with Developmental Disabilities to Control Environmental Stimulation through Simple Physical Activities with Nintendo Wii Balance Boards

    Science.gov (United States)

    Shih, Ching-Hsiang

    2011-01-01

    This study evaluated whether two people with developmental disabilities would be able to actively perform simple physical activities by controlling their favorite environmental stimulation using Nintendo Wii Balance Boards with a newly developed standing location detection program (SLDP, i.e., a new software program turning a Nintendo Wii Balance…

  2. Status of the Instrument Control Unit for EPD on-board Solar Orbiter

    Science.gov (United States)

    Sánchez Prieto, Sebastián; Da Silva, Antonio; Rodriguez Polo, Oscar; Parra Espada, Pablo; Gutierrez Molina, Oscar; Fernandez Salgado, Javier

    Solar Orbiter is the next heliospheric mission sponsored by ESA. The launch is planned for 2017 and it will be as close as 0.28 AU from the Sun. One of the instruments for Solar Orbiter is the Energetic Particle Detector (EPD) responsible for measuring energies from 2 keV to 200 MeV/n. EPD consists of four detectors, Electron Proton Telescope (EPT), High Energy Telescope (HET), SupraThermal Electrons, Ions, & Neutrals (STEIN), and Suprathermal Ion Spectrograph (SIS), plus the Instrument Control Unit called ICU. The Space Research Group of the University of Alcalá in Spain is the responsible for developing the ICU. In this work we present the development status of the ICU after the Critical Design Review. We also address the planned activities for the next year including the development of the Engineering and Qualification Model (EQM) and Flight Model (PM). Special focus is paid to the software and verification & validation activities.

  3. Fast Aircraft Turnaround Enabled by Reliable Passenger Boarding

    Directory of Open Access Journals (Sweden)

    Michael Schultz

    2018-01-01

    Full Text Available Future 4D aircraft trajectories demand comprehensive consideration of environmental, economic, and operational constraints, as well as reliable prediction of all aircraft-related processes. Mutual interdependencies between airports result in system-wide, far-reaching effects in the air traffic network (reactionary delays. To comply with airline/airport challenges over the day of operations, a change to an air-to-air perspective is necessary, with a specific focus on the aircraft ground operations as major driver for airline punctuality. Aircraft ground trajectories primarily consists of handling processes at the stand (deboarding, catering, fueling, cleaning, boarding, unloading, loading, which are defined as the aircraft turnaround. Turnaround processes are mainly controlled by ground handling, airport, or airline staff, except the aircraft boarding, which is driven by passengers’ experience and willingness/ability to follow the proposed boarding procedures. This paper provides an overview of the research done in the field of aircraft boarding and introduces a reliable, calibrated, and stochastic aircraft boarding model. The stochastic boarding model is implemented in a simulation environment to evaluate specific boarding scenarios using different boarding strategies and innovative technologies. Furthermore, the potential of a connected aircraft cabin as sensor network is emphasized, which could provide information on the current and future status of the boarding process.

  4. Can air pollutant controls change global warming?

    International Nuclear Information System (INIS)

    Strefler, Jessica; Luderer, Gunnar; Kriegler, Elmar; Meinshausen, Malte

    2014-01-01

    Highlights: • Air pollution policies do not affect long-term climate targets. • Reduction of aerosols counteracts a fraction of the reduction of Kyoto forcing. • Air pollution policies may affect the rate of climate change in the short term. • There is no tradeoff between clean air and climate policies. - Abstract: In this paper we analyze the interaction between climate and air pollution policies using the integrated assessment model REMIND coupled to the reduced-form climate model MAGICC. Since overall, aerosols tend to cool the atmosphere, there is a concern that a reduction of pollutant emissions could accelerate global warming and offset the climate benefits of carbon dioxide emission reductions. We investigate scenarios which independently reduce emissions from either large-scale sources, such as power plants, or small-scale sources, such as cooking and heating stoves. Large-scale sources are likely to be easier to control, but their aerosol emissions are characterized by a relatively high sulfur content, which tends to result in atmospheric cooling. Pollution from small-scale sources, by contrast, is characterized by a high share of carbonaceous aerosol, which is an important contributor to global warming. We find that air pollution policies can significantly reduce aerosol emissions when no climate policies are in place. Stringent climate policies lead to a large reduction of fossil fuel use, and therefore result in a concurrent reduction of air pollutant emissions. These reductions partly reduce aerosol masking, thus initially counteracting the reduction of greenhouse gas forcing, however not overcompensating it. If climate policies are in place, air pollution policies have almost no impacts on medium- and long-term radiative forcing. Therefore there is no conflict of objectives between clean air and limiting global warming. We find that the stringency of air pollution policies may influence the rate of global temperature change in the first decade

  5. Global warming and climate change: control methods

    International Nuclear Information System (INIS)

    Laal, M.; Aliramaie, A.

    2008-01-01

    This paper aimed at finding causes of global warming and ways to bring it under control. Data based on scientific opinion as given by synthesis reports of news, articles, web sites, and books. global warming is the observed and projected increases in average temperature of Earth's atmosphere and oceans. Carbon dioxide and other air pollution that is collecting in the atmosphere like a thickening blanket, trapping the sun's heat and causing the planet to warm up. Pollution is one of the biggest man-made problems. Burning fossil fuels is the main factor of pollution. As average temperature increases, habitats, species and people are threatened by drought, changes in rainfall, altered seasons, and more violent storms and floods. Indeed the life cycle of nuclear power results in relatively little pollution. Energy efficiency, solar, wind and other renewable fuels are other weapons against global warming . Human activity, primarily burning fossil fuels, is the major driving factor in global warming . Curtailing the release of carbon dioxide into the atmosphere by reducing use of oil, gasoline, coal and employment of alternate energy, sources are the tools for keeping global warming under control. global warming can be slowed and stopped, with practical actions thal yield a cleaner, healthier atmosphere

  6. Does Nintendo Wii Balance Board improve standing balance? A randomized controlled trial in children with cerebral palsy.

    Science.gov (United States)

    Gatica-Rojas, Valeska; Méndez-Rebolledo, Guillermo; Guzman-Muñoz, Eduardo; Soto-Poblete, Alex; Cartes-Velásquez, Ricardo; Elgueta-Cancino, Edith; Cofré Lizama, L Eduardo

    2017-08-01

    Evidence on the effect of systemic exercise programs to improve the standing balance with the Nintendo Wii system is very limited and its post-treatment effectiveness is unknown in cerebral palsy (CP) patients. Primary aim was to compare the effect of Nintendo Wii balance board (Wii-therapy) and standard physiotherapy (SPT), on the performance of standing balance in children and adolescents with CP. Secondary aim was to determine the post-treatment effectiveness of Wii-therapy and SPT. Two-arm, matched-pairs, parallel-groups, randomized, controlled clinical trial. Outpatient Rehabilitation Centre in the city of Talca. Patients with CP type spastic hemiplegia (SHE) and spastic diplegia (SDI), aged 7 to 14 years, and level I or II of GMFCS or GMFCS-ER. Were excluded patients with FSIQWii-therapy (SDI=7; SHE=9) or SPT intervention (SDI=7; SHE=9). In each group, patients received three sessions per week over a period of 6 weeks. Standing balance was assessed at baseline and every 2 weeks. Additionally, two follow-up assessments (4 additional weeks) were performed to determine post-treatment effectiveness. Standing balance was quantified on force platform obtaining the outcomes area of center-of-pressure (CoP) sway (CoPSway), standard deviation in the medial-lateral (SDML) and the anterior-posterior (SDAP) directions, and velocity in both directions (VML and VAP). Compared to SPT, Wii-therapy significantly reduced the CoPSway (P=0.02) and SDAP in the eyes-open condition (P=0.01). However, the effects wane after 2-4 weeks. Post-hoc analysis revealed that only SHE children benefited from Wii-therapy. Wii-therapy was better than SPT in improving standing balance in patients with CP, but improves the balance only in SHE patients. Also, Wii-therapy effectiveness waned 2-4 weeks after the end the intervention. A systematic exercise program like Wii-therapy using the Nintendo Wii Balance Board device can be considered to improves the standing balance in patients with CP

  7. Notification: FY 2012 Management Challenges and Internal Control Weaknesses for the Chemical Safety and Hazard Investigation Board

    Science.gov (United States)

    February 1, 2012. The EPA Office of Inspector General is beginning work to update our list of areas we consider to be the key management challenges confronting the Chemical Safety and Hazard Investigation Board.

  8. Use of electronic bulletin boards for environmental management

    International Nuclear Information System (INIS)

    Kumar, A.; Rao, H.G.

    1991-01-01

    As a result of changes to existing environmental protection legislation, and the numerous changes to existing regulations that continually take place, environmental managers need updated information on federal mandated programs and regulation, approved and other mathematical models, control technologies, acceptable measurement techniques and continuing education courses. The US Environmental Protection Agency (EPA) is providing help to state and local air pollution control agencies, the regulated community, consultants and the general public through electronic bulletin boards. Each bulletin board (BB) uses data base management system and communication technology to provide access to information on several specific topics of interest to the environmental manager. This review discusses nine bulletin board systems available to the public from the EPA. Several alternative bulletin board systems are also available and will be discussed in future columns

  9. A recommendation of the National Board for Atomic Safety and Radiation Protection for the appointment of Nuclear Safety Control Officers for research reactors

    International Nuclear Information System (INIS)

    Adler, B.

    1990-01-01

    The Ordinance on the Implementation of Atomic Safety and Radiation Protection of the GDR requires that the managers of plants where nuclear facilities are operated appoint Control Officers for the fields of radiation protection, nuclear safety, physical protection, and accounting for and control of nuclear materials. The Control Officers are staff members of the operating organization but their appointment is subject to approval by the National Board and requires adequate qualification. The main task of the Control Officers as specialists is to give advice to the plant manager who retains responsibility for the safety of nuclear facilities, and to verify on his behalf that all requirements within their competence are met by the operating group. For this reason the Control Officer has to be absolutely independent of the head of the operating group. To enable the Control Officers to accomplish all necessary control activities and to guarantee independence from the head of the operating group, the plant manager has to establish adequate regulations of operation. As a pattern for such regulations the National Board has issued a Recommendation for the Appointment of Nuclear Safety Control Officers for Research Reactors, which provides a comprehensive survey of the requisite qualification features as well as the duties and rights of these Control Officers. This recommendation will be dealt with in the presentation

  10. Refinement of boards' role required.

    Science.gov (United States)

    Umbdenstock, R J

    1987-01-01

    The governing board's role in health care is not changing, but new competitive forces necessitate a refinement of the board's approach to fulfilling its role. In a free-standing, community, not-for-profit hospital, the board functions as though it were the "owner." Although it does not truly own the facility in the legal sense, the board does have legal, fiduciary, and financial responsibilities conferred on it by the state. In a religious-sponsored facility, the board fulfills these same obligations on behalf of the sponsoring institute, subject to the institute's reserved powers. In multi-institutional systems, the hospital board's power and authority depend on the role granted it by the system. Boards in all types of facilities are currently faced with the following challenges: Fulfilling their basic responsibilities, such as legal requirements, financial duties, and obligations for the quality of care. Encouraging management and the board itself to "think strategically" in attacking new competitive market forces while protecting the organization's traditional mission and values. Assessing recommended strategies in light of consequences if constituencies think the organization is abandoning its commitments. Boards can take several steps to match their mode of operation with the challenges of the new environment. Boards must rededicate themselves to the hospital's mission. Trustees must expand their understanding of health care trends and issues and their effect on the organization. Boards must evaluate and help strengthen management's performance, rather than acting as a "watchdog" in an adversarial position. Boards must think strategically, rather than focusing solely on operational details. Boards must evaluate the methods they use for conducting business.

  11. New Service Status Board

    CERN Multimedia

    2013-01-01

    On Monday 14 October, the Service Status Board for GS and IT will change. The new Status Board will be integrated with the CERN Service Portal and with the CERN Service Catalogue.   As of today, the SSB will display “Service Incidents”, “Planned Interventions” and “Service Changes”. References valid from 14 October: CERN SSB at https://cern.ch/ssb Computing SSB (previously IT SSB) at https://cern.ch/itssb   Nicole Cremel, IT and GS Service Management Support

  12. SVX Sequencer Board

    International Nuclear Information System (INIS)

    Utes, M.

    1997-01-01

    The SVX Sequencer boards are 9U by 280mm circuit boards that reside in slots 2 through 21 of each of eight Eurocard crates in the D0 Detector Platform. The basic purpose is to control the SVX chips for data acquisition and when a trigger occurs, to gather the SVX data and relay the data to the VRB boards in the Movable Counting House. Functions and features are as follows: (1) Initialization of eight SVX chip strings using the MIL-STD-1553 data bus; (2) Real time manipulation of the SVX control lines to effect data acquisition, digitization, and readout based on the NRZ/Clock signals from the Controller; (3) Conversion of 8-bit electrical SVX readout data to an optical signal operating at 1.062 Gbit/sec, sent to the VRB. Eight HDIs will be serviced per board; (4) Built-in logic analyzer which can record the most important control and data lines during a data acquisition cycle and put this recorded information onto the 1553 bus; (5) Identification header and end of data trailer tacked onto data stream; (6) 1553 register which can read the current values of the control and data lines; (7) 1553 register which can test the optical link; (8) 1553 registers for crossing pulse width, calibration pulse voltage, and calibration pipeline select; (9) 1553 register for reading the optical drivers status link; (10) 1553 register for power control of SVX chips and ignoring bad SVX strings; (11) Front panel displays and LEDs show the board status at a glance; (12) In-system programmable EPLDs are programmed via 1553 or Altera's 'Bitblaster'; (13) Automatic readout abort after 45us; (14) Supplies BUSY signal back to Trigger Framework; (15) Supports a heartbeat system to prevent excessive SVX current draw; and (16) Supports a SVX power trip feature if heartbeat failure occurs.

  13. Buddy Board

    DEFF Research Database (Denmark)

    Enggaard, Helle; Moselund, Lene

    2015-01-01

    Projekt ’BuddyBoard’ er kommet i stand via et samarbejde mellem Frederikshavn kommune, Bunker43 og Lab. X. Afdeling en ’Havly’ på Sæby Ældrecenter fungerer som living lab, hvilket betyder, at det udgør et levende laboratorium for udvikling og afprøvning af teknologi (Schultz, 2013). Projektet er....... Bunker43 har udviklet en teknologi (BuddyBoard) til hurtig formidling af billeder fra pårørende og personale til beboere på institutioner. Pårørende og personale uploader billeder via en APP eller en hjemmeside og har mulighed for at tilføje en kort forklarende tekst til hvert billede. Beboeren ser...... billederne via en tablet. Systemet bygger på et simpelt og brugervenligt design, så ældre med kognitive og/eller fysiske funktionsnedsættelser kan anvende teknologien. BuddyBoard fungerer via internettet, og billederne gemmes på en sikret server hos udbyderen, som er Bunker43. Intentionerne med BuddyBoard er...

  14. Evaluating the Effects of Aging on Electronic Instrument and Control Circuit Boards and Components in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Hannaman, G. Willia; Wilkinson, C. Dan

    2005-01-01

    The report describes potentially useful techniques for monitoring the aging of I and C boards. The techniques have been grouped into: periodic testing, reliability modeling, resistance measures, signal comparison, eternal measures, and internal measures, each representing distinct theoretical approaches to detection and evaluation

  15. Modelling the transient analysis of flat miniature heat pipes in printed circuit boards using a control volume approacht

    NARCIS (Netherlands)

    Wits, W.W.; Kok, J.B.W.; van Steenhoven, A.A.; van der Meer, T.H.; Stoffels, G.G.M.

    2008-01-01

    The heat pipe is a two-phase cooling solution, offering very high thermal coefficients, for heat transport. Therefore, it is increasingly used in the design of electronic products. Flat miniature heat pipes are able to effectively remove heat from several hot spots on a Printed Circuit Board (PCB).

  16. Evaluating the Effects of Aging on Electronic Instrument and Control Circuit Boards and Components in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    G. William Hannaman; C. Dan Wilkinson

    2005-05-15

    The report describes potentially useful techniques for monitoring the aging of I&C boards. The techniques have been grouped into: periodic testing, reliability modeling, resistance measures, signal comparison, eternal measures, and internal measures, each representing distinct theoretical approaches to detection and evaluation.

  17. 14 CFR 21.147 - Changes in quality control system.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Changes in quality control system. 21.147 Section 21.147 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... quality control system. After the issue of a production certificate, each change to the quality control...

  18. Organizational Change and the Role and Use of Management Controls

    DEFF Research Database (Denmark)

    Rikhardsson, Pall; Rohde, Carsten; Christensen, Leif

    countries. The paper identifies and explains the roles of different management controls in the organizational change processes initiated after an economic crisis. It shows how management control elements were used to change interpretive schemes and control archetypes to reflect a new operating environment....... The findings show that use of management controls in organizational change is critical. The type and severity of crisis influences what elements of the management control package are used, how they are coupled together and characteristics of the resulting control archetypes. In one context the organizations...... moved from result based management controls archetype to an action based management controls archetype. Other management controls like budgeting remained unchanged to provide stability when going through turbulent change....

  19. Climatic changes, the international control stakes

    International Nuclear Information System (INIS)

    Maljean-Dubois, S.

    2007-01-01

    The author presents a juridical and economic analysis of the control mechanism called ''observance'' of the Kyoto protocol. This political and juridical innovation in the domain of the international agreements on the environment deals with the national sovereignty and the economical development mode. (A.L.B.)

  20. Barrier island community change: What controls it?

    Science.gov (United States)

    Dows, B.; Young, D.; Zinnert, J.

    2014-12-01

    Conversion from grassland to woody dominated communities has been observed globally. In recent decades, this pattern has been observed in coastal communities along the mid-Atlantic U.S. In coastal environments, a suite of biotic and abiotic factors interact as filters to determine plant community structure and distribution. Microclimatic conditions: soil and air temperature, soil moisture and salinity, and light attenuation under grass cover were measured across a grassland-woody encroachment gradient on a Virginia barrier island; to identify the primary factors that mediate this change. Woody establishment was associated with moderately dense (2200 shoots/m2) grass cover, but reduced at high (> 6200 shoots/ m2) and low (Moderately dense grass cover reduced light attenuation (82.50 % reduction) to sufficiently reduce soil temperature thereby limiting soil moisture evaporation. However, high grass density reduced light attenuation (98.7 % reduction) enough to inhibit establishment of woody species; whereas low grass density attenuated much less light (48.7 % reduction) which allowed for greater soil moisture evaporation. Soil salinity was dynamic as rainfall, tidal inundation, and sea spray produce spatiotemporal variation throughout the barrier island landscape. The importance of light and temperature were compounded as they also indirectly affect soil salinity via their affects on soil moisture. Determining how these biotic and abiotic factors relate to sea level rise and climate change will improve understanding coastal community response as global changes proceed. Understanding how community shifts affect ecosystem function and their potential to affect adjacent systems will also improve predictive ability of coastal ecosystem responses.

  1. German versus Nordic Board Models

    DEFF Research Database (Denmark)

    Ringe, Georg

    2016-01-01

    Board structure is an important component of the individual governance of firms, and the appropriateness of the various models is one of the most debated issues in corporate governance today. A comparison of the Nordic and German approaches to the structure of corporate boards reveals stark...... conceptual differences, as emphasized by the 2014 Lekvall Report on the Nordic Corporate Governance Model. This article provides a conceptual comparison between the two approaches to board structure and confirms the fundamental divergence between both models. However, relying on a number of recent legal...... changes and developments in business practice, the article argues that board practices in the two systems effectively blur the structural distinction, and that board organization is converging in practice. It thereby contributes to the broader debates on functionality and comparative corporate law...

  2. Verification of FPGA-Signal using the test board which is applied to Safety-related controller

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Youn-Hu; Yoo, Kwanwoo; Lee, Myeongkyun; Yun, Donghwa [SOOSAN ENS, Seoul (Korea, Republic of)

    2016-10-15

    This article aims to provide the verification method for BGA-type FPGA of Programmable Logic Controller (PLC) developed as Safety Class. The logic of FPGA in the control device with Safety Class is the circuit to control overall logic of PLC. Saftety-related PLC must meet the international standard specifications. With this reason, we use V and V according to an international standard in order to secure high reliability and safety. By using this, we are supposed to proceed to a variety of verification courses for extra reliability and safety analysis. In order to have efficient verification of test results, we propose the test using the newly changed BGA socket which can resolve the problems of the conventional socket on this paper. The Verification of processes is divided into verification of Hardware and firmware. That processes are carried out in the unit testing and integration testing. The proposed test method is simple, the effect of cost reductions by batch process. In addition, it is advantageous to measure the signal from the Hi-speed-IC due to its short length of the pins and it was plated with the copper around it. Further, it also to prevent abrasion on the IC ball because it has no direct contact with the PCB. Therefore, it can be actually applied is to the BGA package test and we can easily verify logic as well as easily checking the operation of the designed data.

  3. Control of poultry coccidiosis: changing trends.

    Science.gov (United States)

    Tewari, A K; Maharana, B R

    2011-06-01

    Coccidiosis is the most important protozoan disease affecting the poultry industry worldwide. Control of poultry coccidiosis is presently based on managerial skills and the use of prophylactic coccidiostatic drugs. With the emergence of drug resistant Eimeria strains, emphasis has been laid on development and use of safer vaccines; some of them have been commercialized successfully. The present review deals with the various factors responsible for the development of clinical coccidiosis in poultry as well as an overview of the currently available inducers and boosters of immunity against coccidiosis. There are three groups of vaccines currently available against coccidiosis which can be distinguished on the basis of characteristics of the Eimeria species included in the respective products, viz. vaccines based on live virulent strains, vaccines based on live attenuated strains, and vaccines based on live strains that are relatively tolerant to the ionophore compounds. The latter vaccine combines the early chemotherapeutic effect of ionophores with the late prophylactic effect of vaccination. Although in the near future more varieties of oocyst based live vaccines are expected, identification of selective coccidian-specific immunoprotective molecules is likely to get more attention to facilitate the sustainable control of poultry coccidiosis.

  4. Defense Business Board

    Science.gov (United States)

    Skip to main content (Press Enter). Toggle navigation Defense Business Board Search Search Defense Business Board: Search Search Defense Business Board: Search Defense Business Board Business Excellence in Defense of the Nation Defense Business Board Home Charter Members Meetings Studies Contact Us The Defense

  5. Report of the Defense Science Board Task Force on Trends and Implications of Climate Change on National and International Security

    Science.gov (United States)

    2011-10-01

    Honduras Senegal Ethiopia Iran Rwanda Fiji Libya Pakistan Source: World Bank 2009. 99 100 52 I CHAPTER 3 101 102 103 POTENTIAL...Southern Command Perspective Mr. Rod Snider American Red Cross American Red Cross and Climate Change MG Bob Barnes Nature Conservancy The Nature ...Model Intercomparison Project CMIP5 5th Coupled Model Intercomparison Project CO2 carbon dioxide COE Center of Excellence for Disaster Management

  6. The Halitosis Parameter Change After Using Siwak (Salvadora Persica At 11-13 Year Old Students in Tapak Sunan Boarding School

    Directory of Open Access Journals (Sweden)

    Arum Wijayanti

    2012-12-01

    Full Text Available Introduction: Siwak (Salvadora persica, an oral cleansing tool which came from ancient Arab has Islamic cultural values. Many researches concluded that siwak contains antibacterial agent which has function to kill bacteria causing oral malodor (halitosis. Objective: The purpose of this study was to analyze halitosis parameters change which consisted of Volatile Sulfur Compounds (VSC, Bleeding on Probing (BOP and tongue coating after using siwak at 11-13 year old students in Tapak Sunan Boarding School. Materials and methods: This study used experimental research method and 25 students in the age group of 11-13 year old became subjects of this study. Halitosis parameters measurements were taken before and after using 10 days siwak usage and through dental health education. OralChroma and organoleptic score were used to measure the VSC. Probing on six sites of gingival sulculs of each tooth was used to measured BOP. Classification of tounge coating was performed by observing the presence of white coating on the tongue surface. Statistical analysis was performed using Paired-t Test with p<0.05 as the level of significance. Results: Approximately 75% reduction of total VSC concentration was observed after siwak usage. Number of subjects with score 1 in organoleptic assessment for halitosis was also increased by 36%. Followed by reduction of BOP and tongue coating score by 57.7% and 26% respectively. Statistical analysis of those parameters showed significant differences before and after siwak usage. Conclusion: Siwak usage sucessfully decreased all halitosis parameters of the 11-13 years old students in Tapak Sunan Boarding School.DOI: 10.14693/jdi.v17i2.45

  7. The Closed-Loop Control of a Three-Phase Inverter Using a DSPACE DS1102 DSP Board

    National Research Council Canada - National Science Library

    Frasz, Derek

    1998-01-01

    .... Electrical Control Units, ECUs, control these converters and inverters. Development of an ECU begins with a prototype design, used by the engineer to test the ability of an experimental algorithm to control a physical system...

  8. The Board's Role in Financial Oversight. AGB Board Essentials Series

    Science.gov (United States)

    Krawitz, Natalie

    2015-01-01

    An often-volatile economy, changing demographics, and technological innovations in educational delivery are among the dramatic changes across higher education that have forced boards and institutions to question the viability of the existing business model. Flat or declining state support in real terms, lower investment returns in some years,…

  9. Drying and control of moisture content and dimensional changes

    Science.gov (United States)

    Richard Bergman

    2010-01-01

    The discussion in this chapter is concerned with moisture content determination, recommended moisture content values, drying methods, methods of calculating dimensional changes, design factors affecting such changes in structures, and moisture content control during transit, storage, and construction. Data on green moisture content, fiber saturation point, shrinkage,...

  10. NaNet3: The on-shore readout and slow-control board for the KM3NeT-Italia underwater neutrino telescope

    Directory of Open Access Journals (Sweden)

    Ammendola R.

    2016-01-01

    Full Text Available The KM3NeT-Italia underwater neutrino detection unit, the tower, consists of 14 floors. Each floor supports 6 Optical Modules containing front-end electronics needed to digitize the PMT signal, format and transmit the data and 2 hydrophones that reconstruct in real-time the position of Optical Modules, for a maximum tower throughput of more than 600 MB/s. All floor data are collected by the Floor Control Module (FCM board and transmitted by optical bidirectional virtual point-to-point connections to the on-shore laboratory, each FCM needing an on-shore counterpart as communication endpoint. In this contribution we present NaNet3, an on-shore readout board based on Altera Stratix V GX FPGA able to manage multiple FCM data channels with a capability of 800 Mbps each. The design is a NaNet customization for the KM3NeT-Italia experiment, adding support in its I/O interface for a synchronous link protocol with deterministic latency at physical level and for a Time Division Multiplexing protocol at data level.

  11. NaNet3: The on-shore readout and slow-control board for the KM3NeT-Italia underwater neutrino telescope

    Science.gov (United States)

    Ammendola, R.; Biagioni, A.; Frezza, O.; Lo Cicero, F.; Martinelli, M.; Paolucci, P. S.; Pontisso, L.; Simula, F.; Vicini, P.; Ameli, F.; Nicolau, C. A.; Pastorelli, E.; Simeone, F.; Tosoratto, L.; Lonardo, A.

    2016-04-01

    The KM3NeT-Italia underwater neutrino detection unit, the tower, consists of 14 floors. Each floor supports 6 Optical Modules containing front-end electronics needed to digitize the PMT signal, format and transmit the data and 2 hydrophones that reconstruct in real-time the position of Optical Modules, for a maximum tower throughput of more than 600 MB/s. All floor data are collected by the Floor Control Module (FCM) board and transmitted by optical bidirectional virtual point-to-point connections to the on-shore laboratory, each FCM needing an on-shore counterpart as communication endpoint. In this contribution we present NaNet3, an on-shore readout board based on Altera Stratix V GX FPGA able to manage multiple FCM data channels with a capability of 800 Mbps each. The design is a NaNet customization for the KM3NeT-Italia experiment, adding support in its I/O interface for a synchronous link protocol with deterministic latency at physical level and for a Time Division Multiplexing protocol at data level.

  12. Annual report to the Atomic Energy Control Board on the Regulatory Research and Support Program April 1, 1994 - March 31, 1995

    International Nuclear Information System (INIS)

    1996-03-01

    The Regulatory Research and Support Program (RSP) is intended to augment and extend activities, undertaken by the Atomic Energy Control Board, beyond what would be possible with in-house resources. The overall objective of the research and support activity is to produce pertinent and independent information that will assist the Board and its staff in making sound, timely and credible decisions for the regulation of nuclear facilities and materials. Represented in this report is a cataloging of seven appendices. The membership of active review panels is given in Appendix A. Appendix B contains summary descriptions and information on the status of individual projects. Appendix C presents a list of those projects which were within the overall RSP but were not active during the year. Appendix D lists the projects undergoing review of final report or post-project evaluation. All projects which were worked on during the year are listed in Appendix E. Specific objectives set for the RSP for Fiscal Year 1994/95 and the degree to which the objectives were achieved are outlined in Appendix F. Appendix G lists the INFO-series reports that were published during Fiscal Year 1994/95. 157 tabs

  13. Annual report to the Atomic Energy Control Board on the Regulatory Research and Support Program April 1, 1994 - March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The Regulatory Research and Support Program (RSP) is intended to augment and extend activities, undertaken by the Atomic Energy Control Board, beyond what would be possible with in-house resources. The overall objective of the research and support activity is to produce pertinent and independent information that will assist the Board and its staff in making sound, timely and credible decisions for the regulation of nuclear facilities and materials. Represented in this report is a cataloging of seven appendices. The membership of active review panels is given in Appendix A. Appendix B contains summary descriptions and information on the status of individual projects. Appendix C presents a list of those projects which were within the overall RSP but were not active during the year. Appendix D lists the projects undergoing review of final report or post-project evaluation. All projects which were worked on during the year are listed in Appendix E. Specific objectives set for the RSP for Fiscal Year 1994/95 and the degree to which the objectives were achieved are outlined in Appendix F. Appendix G lists the INFO-series reports that were published during Fiscal Year 1994/95. 157 tabs.

  14. Annual report to the Atomic Energy Control Board on the Regulatory Research and Support Program April 1, 1994 - March 31, 1995

    International Nuclear Information System (INIS)

    1996-03-01

    The Regulatory Research and Support Program (RSP) is intended to augment and extend activities, undertaken by the Atomic Energy Control Board, beyond what would be possible with in-house resources. The overall objective of the research and support activity is to produce pertinent and independent information that will assist the Board and its staff in making sound, timely and credible decisions for the regulation of nuclear facilities and materials. During Fiscal Year 1994/95, a total of $3.245M was spent of RSP research and support work. The range of activities included projects in the general fields of nuclear reactors, fuel cycle facilities, uranium mines and mills, waste management, dosimetry, health physics, regulations and regulatory process development, and other special support services. Some of this work was organized into sub-program groups, each of which addresses research and support effort in theme-related areas. Five sub-programs were launched during the year bringing to eight the total number of such sub-programs. Areas addressed in the sub-programs are environmental impact assessment and management, safety critical software, seismologic studies, pressure boundary integrity, integrity of containment and safety-related structures, human factors, internal dosimetry, and health effects in human populations. During the year, there were a total of 157 active projects

  15. Weight Control: Attitudes of Dieters and Change Agents.

    Science.gov (United States)

    Parham, Ellen S.; And Others

    1991-01-01

    Survey explores attitudes toward weight loss/weight control among 2 groups of change agents--40 dietitians and 42 fitness instructors--and among 96 people trying to lose weight. Significant differences were found in terms of importance in weight control of diet, drugs, exercise, religion, and will power; in importance of being of normal weight;…

  16. The assessment of postural control and the influence of a secondary task in people with anterior cruciate ligament reconstructed knees using a Nintendo Wii Balance Board.

    Science.gov (United States)

    Howells, Brooke E; Clark, Ross A; Ardern, Clare L; Bryant, Adam L; Feller, Julian A; Whitehead, Timothy S; Webster, Kate E

    2013-09-01

    Postural control impairments may persist following anterior cruciate ligament (ACL) reconstruction. The effect of a secondary task on postural control has, however, not been determined. The purpose of this case-control study was to compare postural control in patients following ACL reconstruction with healthy individuals with and without a secondary task. 45 patients (30 men and 15 women) participated at least 6 months following primary ACL reconstruction surgery. Participants were individually matched by age, gender and sports activity to healthy controls. Postural control was measured using a Nintendo Wii Balance Board and customised software during static single-leg stance and with the addition of a secondary task. The secondary task required participants to match the movement of an oscillating marker by adducting and abducting their arm. Centre of pressure (CoP) path length in both medial-lateral and anterior-posterior directions, and CoP total path length. When compared with the control group, the anterior-posterior path length significantly increased in the ACL reconstruction patients' operated (12.3%, p=0.02) and non-operated limbs (12.8%, p=0.02) for the single-task condition, and the non-operated limb (11.5%, p=0.006) for the secondary task condition. The addition of a secondary task significantly increased CoP path lengths in all measures (pcontrol groups. ACL reconstruction patients showed a reduced ability in both limbs to control the movement of the body in the anterior-posterior direction. The secondary task affected postural control by comparable amounts in patients after ACL reconstruction and healthy controls. Devices for the objective measurement of postural control, such as the one used in this study, may help clinicians to more accurately identify patients with deficits who may benefit from targeted neuromuscular training programs.

  17. 46 CFR 96.40-1 - Pilot boarding equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Pilot boarding equipment. 96.40-1 Section 96.40-1... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Pilot Boarding Equipment § 96.40-1 Pilot boarding... boat or other vessel. (b) Each vessel must have suitable pilot boarding equipment available for use on...

  18. 46 CFR 195.40-1 - Pilot boarding equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pilot boarding equipment. 195.40-1 Section 195.40-1... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Pilot Boarding Equipment § 195.40-1 Pilot boarding... boat or other vessel. (b) Each vessel must have suitable pilot boarding equipment available for use on...

  19. Controlling changes - lessons learned from waste management facilities

    International Nuclear Information System (INIS)

    Johnson, B.M.; Koplow, A.S.; Stoll, F.E.; Waetje, W.D.

    1995-01-01

    This paper discusses lessons learned about change control at the Waste Reduction Operations Complex (WROC) and Waste Experimental Reduction Facility (WERF) of the Idaho National Engineering Laboratory (INEL). WROC and WERF have developed and implemented change control and an as-built drawing process and have identified structures, systems, and components (SSCS) for configuration management. The operations have also formed an Independent Review Committee to minimize costs and resources associated with changing documents. WROC and WERF perform waste management activities at the INEL. WROC activities include storage, treatment, and disposal of hazardous and mixed waste. WERF provides volume reduction of solid low-level waste through compaction, incineration, and sizing operations. WROC and WERF's efforts aim to improve change control processes that have worked inefficiently in the past

  20. The Kostyuk report: Corporate board practices in Ukraine

    Directory of Open Access Journals (Sweden)

    Alexander N. Kostyuk

    2005-01-01

    Full Text Available The author reports on the corporate board practices in Ukraine. The roles of board of directors are mainly about control. The strategic and advisory roles are not developed. The mode of strategic involvement of the members of supervisory boards in Ukraine is mainly about reviewing and approving. Thus, the board of directors in Ukraine is "a rubber stamp". The degree of independence of directors is very low. Major board practices in Ukraine are: small number of independent directors on the board; low frequency of meeting of the board; small number of committees on the board; the management board influences the supervisory board. Board practices in Ukraine need a sort of recommendations, similar to those, made in UK at the end of 1990s, and at the start of the third millennium.

  1. The 2BFit study: is an unsupervised proprioceptive balance board training programme, given in addition to usual care, effective in preventing ankle sprain recurrences? Design of a Randomized Controlled Trial

    Directory of Open Access Journals (Sweden)

    van Mechelen Willem

    2008-05-01

    Full Text Available Abstract Background There is strong evidence that athletes have a twofold risk for re-injury after a previous ankle sprain, especially during the first year post-injury. These ankle sprain recurrences could result in disability and lead to chronic pain or instability in 20 to 50% of these cases. When looking at the high rate of ankle sprain recurrences and the associated chronic results, ankle sprain recurrence prevention is important. Objective To evaluate the effect of a proprioceptive balance board training programme on ankle sprain recurrences, that was applied to individual athletes after rehabilitation and treatment by usual care. Methods/Design This study was designed as a randomized controlled trial with a follow-up of one year. Healthy individuals between 12 and 70 years of age, who were actively participating in sports and who had sustained a lateral ankle sprain up to two months prior to inclusion, were eligible for inclusion in the study. The intervention programme was compared to usual care. The intervention programme consisted of an eight-week proprioceptive training, which started after finishing usual care and from the moment that sports participation was again possible. Outcomes were assessed at baseline and every month for 12 months. The primary outcome of this study was the incidence of recurrent ankle injuries in both groups within one year after the initial sprain. Secondary outcomes were severity and etiology of re-injury and medical care. Cost-effectiveness was evaluated from a societal perspective. A process evaluation was conducted for the intervention programme. Discussion The 2BFit trial is the first randomized controlled trial to study the effect of a non-supervised home-based proprioceptive balance board training programme in addition to usual care, on the recurrence of ankle sprains in sports. Results of this study could possibly lead to changes in practical guidelines on the treatment of ankle sprains. Results will

  2. Automatic control system of a linear actuator for positioning samples to neutron irradiation using low cost open-hardware boards

    International Nuclear Information System (INIS)

    Cunya, Eduardo; Chan, Renzo; Pacheco, Adison

    2015-01-01

    This paper describes the design criteria and implementation of an automatic control system based on embedded electronic circuits (microcontrollers) of different architectures (RISC, ARM) and open source framework software CanFestival, to develop user applications. Electronic devices are autonomous and support the functionality required for communication and remote control of the linear actuator. (author)

  3. Hospital boards and hospital strategic focus: the impact of board involvement in strategic decision making.

    Science.gov (United States)

    Ford-Eickhoff, Karen; Plowman, Donde Ashmos; McDaniel, Reuben R

    2011-01-01

    Despite pressures to change the role of hospital boards, hospitals have made few changes in board composition or director selection criteria. Hospital boards have often continued to operate in their traditional roles as either "monitors" or "advisors." More attention to the direct involvement of hospital boards in the strategic decision-making process of the organizations they serve, the timing and circumstances under which board involvement occurs, and the board composition that enhances their abilities to participate fully is needed. We investigated the relationship between broader expertise among hospital board members, board involvement in the stages of strategic decision making, and the hospital's strategic focus. We surveyed top management team members of 72 nonacademic hospitals to explore the participation of critical stakeholder groups such as the board of directors in the strategic decision-making process. We used hierarchical regression analysis to explore our hypotheses that there is a relationship between both the nature and involvement of the board and the hospital's strategic orientation. Hospitals with broader expertise on their boards reported an external focus. For some of their externally-oriented goals, hospitals also reported that their boards were involved earlier in the stages of decision making. In light of the complex and dynamic environment of hospitals today, those charged with developing hospital boards should match the variety in the external issues that the hospital faces with more variety in board makeup. By developing a board with greater breadth of expertise, the hospital responds to its complex environment by absorbing that complexity, enabling a greater potential for sensemaking and learning. Rather than acting only as monitors and advisors, boards impact their hospitals' strategic focus through their participation in the strategic decision-making process.

  4. Financial Crisis and Changes in Management Controls in Banks

    DEFF Research Database (Denmark)

    Rikhardsson, Pall; Rohde, Carsten; Christensen, Leif

    requirements. Risk management, compliance and internal auditing were relatively mature processes in the Danish banks before the crisis, and the adjustments required to adapt to changed compliance requirements were less extensive. Management controls in general seem to play a critical role in responding......The financial crisis of 2008 hit banks in Iceland and Denmark with different intensity. There was a difference in how management controls changed in response to the crisis. Icelandic banks redefined cultural controls, introducing new values as a “clean break” with the banks’ pre-2008 practices....... They formalised their risk management, compliance and internal auditing practices, and hired more employees to perform these functions. Further, they strengthened and formalised their policies and procedures to ensure consistent practices. The Danish banks adapted their administrative controls to new regulatory...

  5. Changing pulse-shape basis for molecular learning control

    International Nuclear Information System (INIS)

    Cardoza, David; Langhojer, Florian; Trallero-Herrero, Carlos; Weinacht, Thomas; Monti, Oliver L.A.

    2004-01-01

    We interpret the results of a molecular fragmentation learning control experiment. We show that in the case of a system where control can be related to the structure of the optimal pulse matching the vibrational dynamics of the molecule, a simple change of pulse-shape basis in which the learning algorithm performs the search can reduce the dimensionality of the search space to one or two degrees of freedom

  6. Institutional Evolution and Corporate Boards

    DEFF Research Database (Denmark)

    Chen, Victor Zitian; Hobdari, Bersant; Sun, Pei

    2014-01-01

    We argue that corporate boards are a dynamic repository of human- and social capital in response to external institutional evolution. Theoretically, integrating institutional economics, agency theory and resource dependence theory, we explain that evolution of market-, legal- and political......, since the board changes are typically proposed by the block shareholders, whose motivation for doing so is closely associated with a corporation’s financial performance, we further argue that financial performance is a key moderator of the relationships between institutional evolution and changes...... institutions restructures the particular context in which board members play their two primary roles: monitoring the CEO on behalf of the shareholders, suggested by the agency theory, and supporting the CEO by providing resources, knowledge and information, suggested by the resource dependence theory...

  7. Subjective well-being in times of social change: congruence of control strategies and perceived control.

    Science.gov (United States)

    Grümer, Sebastian; Silbereisen, Rainer K; Heckhausen, Jutta

    2013-01-01

    This paper investigates the association between perceptions of broader changes in the social-ecological context and individuals' subjective well-being (SWB). Macro-level societal changes such as globalization or demographic change give rise to new demands for individual functioning at work and/or in the family. Such new demands associated with social change are stressful and likely to be related to lower levels of SWB. Being active agents, individuals attempt to deal with social change and its increasing demands to protect their SWB. The present study investigates which kinds of control strategies are most effective in protecting one's SWB. Specifically, we predicted that control strategies of goal engagement will be most effective under conditions of perceived high control, and control strategies of goal disengagement will be most effective under conditions of perceived low control. In a large sample of 2537 German adults, work- and family-related demands associated with social change were found to be negatively linked to SWB. Moreover and in line with the motivational theory of lifespan development, control strategies of goal engagement and disengagement were beneficial for SWB to the extent that they matched the perceived control of the demands associated with social change.

  8. Annual report to the Atomic Energy Control Board on the regulatory research and support program April 1, 1995 - March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    The Regulatory Research and Support Program (RSP) is intended to augment and extend activities, undertaken by the Atomic Energy Control Board, beyond what would be possible with in-house resources. The overall objective of the research and support activity is to produce pertinent and independent information that will assist the Board and its staff in making sound, timely and credible decisions for the regulation of nuclear facilities and materials. During Fiscal Year 1995/96, a total of $3,029M was spent on RSP research and support work. The range of activities included projects in the general fields of nuclear reactors, fuel cycle facilities, uranium mines and mills, waste management, dosimetry, health physics, regulations and regulatory process development, and other special support services. Some of this work was organized into sub-program groups. Four sub-programs were launched during the year bringing to twelve the total number. Areas addressed in the sub-programs are environmental impact assessment and management, safety-related computerized systems, seismologic studies, pressure boundary integrity, integrity of containment and safety-related structures, human factors, internal dosimetry, health effects in human populations, physics and fuel studies, probabilistic safety assessment, emergency preparedness, and radiobiology. During the year, there were a total of 118 active projects. This number included projects planned for the year, others which remained incomplete from the previous year and a significant number of projects which were initiated in response to new, high-priority needs. This report presents information on the scope of RSP activities during the year and describes how the program was managed, organized and implemented. Overviews are presented of research and support work undertaken in each field of activity and some highlights of results obtained are included. (Abstract Truncated)

  9. Rapid Control Prototyping and PIL Co-Simulation of a Quadrotor UAV Based on NI myRIO-1900 Board

    OpenAIRE

    Soufiene Bouallègue; Rabii Fessi

    2016-01-01

    In this paper, a new Computer Aided Design (CAD) methodology for the Processor-In-the-Loop (PIL) co-simulation and Rapid Control Prototyping (RCP) of a Quadrotor Vertical Take-Off and Landing (VTOL) type of Unmanned Arial Vehicle (UAV) is proposed and successfully implemented around an embedded NI myRIO-1900 target and a host PC. The developed software (SW) and hardware (HW) prototyping platform is based on the Control Design and Simulation (CDSim) module of LabVIEW environment and an establi...

  10. Shareholders proposals, vote outcome, and board composition

    Directory of Open Access Journals (Sweden)

    Amani Khaled Bouresli

    2008-07-01

    Full Text Available This paper examines the variables that affect vote outcome in shareholder proposals. We found that sponsor identity, proposal type, and board composition play a significant role in determining vote outcome. Furthermore, we found that the interaction between the prior performance with board composition is significant and has a negative coefficient. We conducted nonparametric tests to investigate changes in board’s major characteristics before and after targeting. The results indicate that some changes in management and boards occur after shareholder proposals. These changes, however, are unrelated to variables that impact vote outcome. We conclude that shareholders proposals are not effective at changing company behavior or corporate governance

  11. Phase Change Permeation Technology For Environmental Control Life Support Systems

    Science.gov (United States)

    Wheeler, Raymond M.

    2014-01-01

    Use of a phase change permeation membrane (Dutyion [Trademark]) to passively and selectively mobilize water in microgravity to enable improved water recovery from urine/brine for Environment Control and Life Support Systems (ECLSS) and water delivery to plans for potential use in microgravity.

  12. 27 CFR 40.512 - Change in ownership or control.

    Science.gov (United States)

    2010-04-01

    ... notify the appropriate TTB officer in writing, giving the identity of such person. When there is any... processed tobacco results in a change in the identity of the principal stockholders exercising actual or legal control of the operations of the corporation, the corporate manufacturer shall, within 30 days...

  13. 27 CFR 41.252 - Change in ownership or control.

    Science.gov (United States)

    2010-04-01

    ..., so notify the appropriate TTB officer in writing, giving the identity of such person. When there is... importer of processed tobacco results in a change in the identity of the principal stockholders exercising actual or legal control of the operations of the corporation, the corporate manufacturer must, within 30...

  14. Enabling People with Developmental Disabilities to Actively Follow Simple Instructions and Perform Designated Physical Activities According to Simple Instructions with Nintendo Wii Balance Boards by Controlling Environmental Stimulation

    Science.gov (United States)

    Shih, Ching-Hsiang; Chung, Chiao-Chen; Shih, Ching-Tien; Chen, Ling-Che

    2011-01-01

    The latest researches have adopted software technology turning the Nintendo Wii Balance Board into a high performance standing location detector. This study extended Wii Balance Board functionality to assess whether two people with developmental disabilities would be able to actively perform designated physical activities according to simple…

  15. Departmental Appeals Board Decisions

    Data.gov (United States)

    U.S. Department of Health & Human Services — Decisions issued by the Chair and Board Members of the Departmental Appeals Board concerning determinations in discretionary, project grant programs, including...

  16. Pilot Boarding Areas

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Pilot boarding areas are locations at sea where pilots familiar with local waters board incoming vessels to navigate their passage to a destination port. Pilotage is...

  17. Kaledo, a board game for nutrition education of children and adolescents at school: cluster randomized controlled trial of healthy lifestyle promotion.

    Science.gov (United States)

    Viggiano, Alessandro; Viggiano, Emanuela; Di Costanzo, Anna; Viggiano, Andrea; Andreozzi, Eleonora; Romano, Vincenzo; Rianna, Ines; Vicidomini, Claudia; Gargano, Giuliana; Incarnato, Lucia; Fevola, Celeste; Volta, Pietro; Tolomeo, Caterina; Scianni, Giuseppina; Santangelo, Caterina; Battista, Roberta; Monda, Marcellino; Viggiano, Adela; De Luca, Bruno; Amaro, Salvatore

    2015-02-01

    During childhood and adolescence, a game could be an effective educational tool to learn healthy eating habits. We developed Kaledo, a new board game, to promote nutrition education and to improve dietary behavior. A two-group design with one pre-treatment assessment and two post-treatment assessments was employed. A total of 3,110 subjects (9-19 years old) from 20 schools in Campania, Italy, were included in the trial. In the treated group, the game was introduced each week over 20 consecutive weeks. Control group did not receive any intervention. The primary outcomes were (i) score on the "Adolescent Food Habits Checklist" (AFHC), (ii) scores on a dietary questionnaire, and (iii) BMI z-score. At the first post-assessment (6 months), the treated group obtained significantly higher scores than the control group on the AFHC (14.4 (95 % confidence interval (CI) 14.0 to 14.8) vs 10.9 (95 % CI 10.6 to -11.2); F(1,20) = 72.677; p childhood and adolescence obesity prevention programs.

  18. Ignorance is no excuse for directors minimizing information asymmetry affecting boards

    Directory of Open Access Journals (Sweden)

    Eythor Ivar Jonsson

    2006-11-01

    Full Text Available This paper looks at information asymmetry at the board level and how lack of information has played a part in undermining the power of the board of directors. Information is power, and at board level, information is essential to keep the board knowledgeable about the failures and successes of the organization that it is supposed to govern. Although lack of information has become a popular excuse for boards, the mantra could –and should –be changing to, “Ignorance is no excuse” (Mueller, 1993. This paper explores some of these information system solutions that have the aim of resolving some of the problems of information asymmetry. Furthermore, three case studies are used to explore the problem of asymmetric information at board level and the how the boards are trying to solve the problem. The focus of the discussion is to a describe how directors experience the information asymmetry and if they find it troublesome, b how important information is for the control and strategy role of the board and c find out how boards can minimize the problem of asymmetric information. The research is conducted through semi-structured interviews with directors, managers and accountants. This paper offers an interesting exploration into information, or the lack of information, at board level. It describes both from a theoretical and practical viewpoint the problem of information asymmetry at board level and how companies are trying to solve this problem. It is an issue that has only been lightly touched upon in the corporate governance literature but is likely to attract more attention and research in the future.

  19. In Defense of Boards

    NARCIS (Netherlands)

    B. Visser (Bauke); S. Dominguez Martinez (Silvia); O.H. Swank (Otto)

    2007-01-01

    textabstractIt is often assumed that bad corporate performance means a bad CEO. The task of a board of directors is then simple: dismiss the executive. If it fails to do so, the board is said to be indolent. We take a kinder approach to observed board behaviour and point to the problems even

  20. On board catalytic NOx control: mechanistic aspects of the regeneration of Lean NOx Traps with H2

    International Nuclear Information System (INIS)

    Forzatti, Pio; Lietti, Luca; Nova, Isabella

    2008-01-01

    Mechanistic aspects of the reduction with H 2 of NO x stored on Lean NO x Trap catalysts are critically reviewed. It was shown that, under nearly isothermal conditions nitrogen formation occurs via an in series two-step process involving the participation of ammonia as an intermediate. The first step of this process is ammonia formation through the reaction of H 2 with stored nitrates; ammonia then reacts with the nitrates left on the catalysts surface leading to the formation of nitrogen. Over the investigated Ba-containing catalysts, the first step (i.e. NH 3 formation) is much faster than the second one which, therefore, is rate determining in the formation of nitrogen. Both steps are catalyzed by Pt and, under nearly isothermal conditions, do not involve the occurrence of a thermal decomposition step of the stored nitrates. Due to the fast reaction of the adsorbed nitrates with H 2 to give ammonia and to the integral behaviour of the trap, an H 2 front develops in the trap which travels along the reactor axis. Ammonia formed upon reaction of nitrates with H 2 reacts downstream of the H 2 front with nitrates leading to N 2 formation, if the temperature is high enough. This explains both the observed change in the selectivity of the process with time upon regeneration of the trap (with selectivity changing from N 2 to NH 3 ), and the increase in the N 2 selectivity with temperature as well. The identification of the pathway for the reduction of stored NO x , where ammonia is suggested as the intermediate product in the formation of nitrogen, may favour the improvement of the combined NSR + SCR technology that has been proposed by several car manufacturers to make NO x removal by NSR more effective and to simultaneously limit the ammonia slip (GB)

  1. Changes in control room at Swedish nuclear power plants

    International Nuclear Information System (INIS)

    Kecklund, Lena

    2005-09-01

    The Swedish nuclear power plants were commissioned during a period between 1972 and 1985 and the instrumentation and control equipment are basically from that period. For several years there have been plans made for changes in all the nuclear power plants and to a certain extent the changes in control equipment and monitoring rooms have also been implemented. The object of this project was to make a comprehensive review of the changes in control room design implemented in the Swedish nuclear power plants and to describe how the MTO- (Man-Technology-Organisation) and (Man-Machine-Interface) -issues have been integrated in the process. The survey is intended to give an overall picture of the changes in control room design and man-machine-interface made in the Swedish control rooms, in order to get a deeper knowledge of the change management process and its results as well as of the management of MTO-issues in these projects. The units included in this survey are: Oskarhamn reactor 2 and 3; Ringhals reactor 2, 3 and 4; Forsmark reactor 1, 2 and 3. The Oskarshamn 1 unit has not been included in this report as it has recently undergone an extensive modernisation program as well as a detailed inspection by the SKI (Swedish Nuclear Power Inspectorate). At Ringhals 2 the modernisation work is carried out at present and the unit is also subjected to extensive inspection activities carried out by SKI and is therefore not part of this survey. This report also includes a short description of relevant standards and requirements. Then follows a presentation of the results of the plant survey, presented as case studies for three companies OKG, Ringhals and FKA. Control room changes are summarized as well as the results on specific MTO issues which has been surveyed. In all the power companies there is a joint way of working with projects concerning plant modifications. This process is described for each company separately. In the concluding of the report the strengths and

  2. Nuclear electronic equipment for control and monitoring boards. Specifications and test methods of direct current period meters

    International Nuclear Information System (INIS)

    Roquefort, Henri; Chapelot; Ramard; Tardif; Tournier; Vaux

    1973-11-01

    After a few words of introduction, mention of the main notations used and the definition of certain terms, the field of application of the document is outlined and a list of references given. The main specifications of electronic 'direct current period meter' subassemblies for the monitoring, control and safety of nuclear reactors are then defined and the corresponding test methods described. The apparatus measures on a logarithmic scale the neutron fluence rate of a reactor by means of an ionisation chamber and supplies 'period' data relative to the fluence rate variation in time. The specifications and test methods are given for the different components: logarithmic amplifier, time derivative unit, threshold releases, high tension supply for ionisation chamber, auxiliary circuits and finally the complete period meter. (author) [fr

  3. Innovation That Sticks Case Study Report: Ottawa Catholic School Board. Leading and Learning for Innovation, A Framework for District-Wide Change

    Science.gov (United States)

    Canadian Education Association, 2016

    2016-01-01

    A Canadian Education Association (CEA) Selection Jury chose the Ottawa Catholic School Board (OCSB) out of 35 School District applicants from across Canada to participate in the 2015 "Innovation that Sticks" Case Study Program. From September to December 2015--through an Appreciative Inquiry interview process--the CEA researched how the…

  4. Board diligence, director business and corporate governance

    Directory of Open Access Journals (Sweden)

    Saibal Ghosh

    2007-11-01

    Full Text Available The paper examines the association between financial performance and boards of non-financial firms. Using data on over 200 listed manufacturing firms in India for 2005, the findings indicate that, after controlling for various firm-specific factors, board diligence as well as director busyness exerts a positive influence on corporate performance.

  5. miRNA control of vegetative phase change in trees.

    Directory of Open Access Journals (Sweden)

    Jia-Wei Wang

    2011-02-01

    Full Text Available After germination, plants enter juvenile vegetative phase and then transition to an adult vegetative phase before producing reproductive structures. The character and timing of the juvenile-to-adult transition vary widely between species. In annual plants, this transition occurs soon after germination and usually involves relatively minor morphological changes, whereas in trees and other perennial woody plants it occurs after months or years and can involve major changes in shoot architecture. Whether this transition is controlled by the same mechanism in annual and perennial plants is unknown. In the annual forb Arabidopsis thaliana and in maize (Zea mays, vegetative phase change is controlled by the sequential activity of microRNAs miR156 and miR172. miR156 is highly abundant in seedlings and decreases during the juvenile-to-adult transition, while miR172 has an opposite expression pattern. We observed similar changes in the expression of these genes in woody species with highly differentiated, well-characterized juvenile and adult phases (Acacia confusa, Acacia colei, Eucalyptus globulus, Hedera helix, Quercus acutissima, as well as in the tree Populus x canadensis, where vegetative phase change is marked by relatively minor changes in leaf morphology and internode length. Overexpression of miR156 in transgenic P. x canadensis reduced the expression of miR156-targeted SPL genes and miR172, and it drastically prolonged the juvenile phase. Our results indicate that miR156 is an evolutionarily conserved regulator of vegetative phase change in both annual herbaceous plants and perennial trees.

  6. Balance in machine architecture: Bandwidth on board and offboard, integer/control speed and flops versus memory

    International Nuclear Information System (INIS)

    Fischler, M.

    1992-04-01

    The issues to be addressed here are those of ''balance'' in machine architecture. By this, we mean how much emphasis must be placed on various aspects of the system to maximize its usefulness for physics. There are three components that contribute to the utility of a system: How the machine can be used, how big a problem can be attacked, and what the effective capabilities (power) of the hardware are like. The effective power issue is a matter of evaluating the impact of design decisions trading off architectural features such as memory bandwidth and interprocessor communication capabilities. What is studied is the effect these machine parameters have on how quickly the system can solve desired problems. There is a reasonable method for studying this: One selects a few representative algorithms and computes the impact of changing memory bandwidths, and so forth. The only room for controversy here is in the selection of representative problems. The issue of how big a problem can be attacked boils down to a balance of memory size versus power. Although this is a balance issue it is very different than the effective power situation, because no firm answer can be given at this time. The power to memory ratio is highly problem dependent, and optimizing it requires several pieces of physics input, including: how big a lattice is needed for interesting results; what sort of algorithms are best to use; and how many sweeps are needed to get valid results. We seem to be at the threshold of learning things about these issues, but for now, the memory size issue will necessarily be addressed in terms of best guesses, rules of thumb, and researchers' opinions

  7. Ex vivo changes in blood glucose levels seldom change blood glucose control algorithm recommendations

    NARCIS (Netherlands)

    de Groene, L.; Harmsen, R. E.; Binnekade, J. M.; Spronk, P. E.; Schultz, M. J.

    2010-01-01

    Background. Hyperglycemia and glycemic variabilities are associated with adverse outcomes in critically ill patients. Blood glucose control with insulin mandates an adequate and precise assessment of blood glucose levels. Blood glucose levels, however, can change ex vivo after sampling. The aim of

  8. Control of ventilation system when changing of its topology

    International Nuclear Information System (INIS)

    Koketayev, A.I.

    2009-01-01

    The complex ventilation systems of modern coal and ore mines can be described by multidimensional and highly bound graphs. Because of changes in topology, it is very difficult to control ventilation systems in the event of emergency situations such as rock bumps, roof caving, sudden gas outburst, quicksand intrusion, or mine flooding. Special mathematical tools are needed to consider such changes and to determine the corresponding conditions of a mine's ventilation needs. This paper presented a system to simulate the behaviour of mine ventilation system. The system considered changes in topology as well as timely measures for support of necessary air quantity for safe conditions for miners in underground mine workings. The paper presented the details of the study with particular reference to the calculation of ventilation conditions; graphs and sub-graphs of the ventilation system; and corresponding equations. It was concluded that the simulated system would allow users to simulate the behaviour of the mine ventilation system when changing its topology in a timely manner and to take measures to control the required volume of air to ensure safe working conditions for underground miners. 3 refs., 1 fig.

  9. Resilient controls for ordering uncertain prospects change and response

    CERN Document Server

    Pham, Khanh D

    2014-01-01

    Providing readers with a detailed examination of resilient controls in risk-averse decision, this monograph is aimed toward researchers and graduate students in applied mathematics and electrical engineering with a systems-theoretic concentration. This work contains a timely and responsive evaluation of reforms on the use of asymmetry or skewness pertaining to the restrictive family of quadratic costs that have been appeared in various scholarly forums.  Additionally, the book includes a discussion of the current and ongoing efforts in the usage of risk, dynamic game decision optimization and disturbance mitigation techniques with output feedback measurements tailored toward the worst-case scenarios. This work encompasses some of the current changes across uncertainty quantification, stochastic control communities, and the creative efforts that are being made to increase the understanding of resilient controls. Specific considerations are made in this book for the application of decision theory to resilient ...

  10. Use of the Nintendo Wii Balance Board for Studying Standing Static Balance Control: Technical Considerations, Force-Plate Congruency, and the Effect of Battery Life.

    Science.gov (United States)

    Weaver, Tyler B; Ma, Christine; Laing, Andrew C

    2017-02-01

    The Nintendo Wii Balance Board (WBB) has become popular as a low-cost alternative to research-grade force plates. The purposes of this study were to characterize a series of technical specifications for the WBB, to compare balance control metrics derived from time-varying center of pressure (COP) signals collected simultaneously from a WBB and a research-grade force plate, and to investigate the effects of battery life. Drift, linearity, hysteresis, mass accuracy, uniformity of response, and COP accuracy were assessed from a WBB. In addition, 6 participants completed an eyes-closed quiet standing task on the WBB (at 3 battery life levels) mounted on a force plate while sway was simultaneously measured by both systems. Characterization results were all associated with less than 1% error. R 2 values reflecting WBB sensor linearity were > .99. Known and measured COP differences were lowest at the center of the WBB and greatest at the corners. Between-device differences in quiet stance COP summary metrics were of limited clinical significance. Lastly, battery life did not affect WBB COP accuracy, but did influence 2 of 8 quiet stance WBB parameters. This study provides general support for the WBB as a low-cost alternative to research-grade force plates for quantifying COP movement during standing.

  11. 77 FR 20820 - Change in Bank Control Notices; Acquisitions of Shares of a Bank or Bank Holding Company

    Science.gov (United States)

    2012-04-06

    ... Trust, and Gloria Foley, all of Lovington, Illinois, and Paul Michael Hrvol, Jr. and Paul Michael Hrvol... Bancorp, Inc. and thereby indirectly control Hardware State Bank, both of Lovington, Illinois. Board of...

  12. Annual report to the Atomic Energy Control Board on the regulatory research and support program April 1, 1995 - March 31, 1996

    International Nuclear Information System (INIS)

    1996-10-01

    The Regulatory Research and Support Program (RSP) is intended to augment and extend activities, undertaken by the Atomic Energy Control Board, beyond what would be possible with in-house resources. The overall objective of the research and support activity is to produce pertinent and independent information that will assist the Board and its staff in making sound, timely and credible decisions for the regulation of nuclear facilities and materials. During Fiscal Year 1995/96, a total of $3,029M was spent on RSP research and support work. The range of activities included projects in the general fields of nuclear reactors, fuel cycle facilities, uranium mines and mills, waste management, dosimetry, health physics, regulations and regulatory process development, and other special support services. Some of this work was organized into sub-program groups, each of which addresses research and support effort in theme-related areas. Four sub-programs were launched during the year bringing to twelve the total number of such sub-programs. Areas addressed in the sub-programs are environmental impact assessment and management, safety-related computerized systems, seismologic studies, pressure boundary integrity, integrity of containment and safety-related structures, human factors, internal dosimetry, health effects in human populations, physics and fuel studies, probabilistic safety assessment, emergency preparedness, and radiobiology. During the year, there were a total of 118 active projects. This number included projects planned for the year, others which remained incomplete from the previous year and a significant number of projects which were initiated in response to new, high-priority needs. This report presents information on the scope of RSP activities during the year and describes how the program was managed, organized and implemented. Overviews are presented of research and support work undertaken in each field of activity and some highlights of results obtained are

  13. Microgravity induced changes in the control of motor units

    Science.gov (United States)

    de Luca, C.; Roy, S.

    The goal of this project is to understand the effects of microgravity on the control of muscles. It is motivated by the notion that in order to adequately address microgravity-induced deterioration in the force generating capacity of muscles, one needs to understand the changes in the control aspects in addition to histochemical and morphological changes. The investigations into muscle control need to include the regulation of the firing activity of motor units that make up a muscle and the coordination of different muscles responsible for the control of a joint. In order to understand the effects of microgravity on these two aspects of muscle control, we will test astronauts before and after spaceflight. The investigations of the control of motor units will involve intramuscular EMG techniques developed in our laboratory. We will use a quadrifilar electrode to detect simultaneously three differential channels of EMG activity. These data will be decomposed accurately using a sophisticated set of algorithms constructed with artificial intelligence knowledge- based techniques. Particular attention will be paid to the firing rate and recruitment behavior of motor units and we will study the degree of cross-correlation of the firing rates. This approach will enable us to study the firing behavior of several (approx. 10) concurrently active motor units. This analysis will enable us to detect modifications in the control of motor units. We will perform these investigations in a hand muscle, which continues being used in prehensile tasks in space, and a leg muscle whose antigravity role is not needed in space. The comparison of the effects of weightlessness on these muscles will determine if continued use of muscles in space deters the possible deleterious effects of microgravity on the control of motor units, in addition to slowing down atrophy. We are particularly interested in comparing the results of this study to similar data already obtained from elderly subjects

  14. Pension Fund governing board

    CERN Multimedia

    HR Department

    2008-01-01

    On 16 March and 7 May, the Pension Fund Governing Board (PFGB) held its fourth and fifth meetings The first of these meetings was primarily dedicated to the examination of the strategic asset allocation. The PFGB reaffirmed the main goal of the new strategic asset allocation: to improve the Pension Fund’s position with regard to risk by lowering overall portfolio volatility through suitable investments in less volatile asset classes such as real estate and absolute return strategies, where the return does not depend on market trends and negative growth is extremely unlikely. The finalised document will be presented to the Finance Committee and the Council at their June meetings for approval, in accordance with the provisions of the Levaux report. The PFGB also took note of the Internal Audit’s report on Pension Fund operations and decided to refer it to Working Group I as a working document for establishing a control and internal monitoring system for Pension Fund oper...

  15. 76 FR 76122 - Senior Executive Service Performance Review Board

    Science.gov (United States)

    2011-12-06

    ... CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD Senior Executive Service Performance Review Board... change in the membership of the Senior Executive Service Performance Review Board for the Chemical Safety... Senior Executive Service (SES) and makes recommendations as to final annual performance ratings for...

  16. 78 FR 57837 - Senior Executive Service Performance Review Board

    Science.gov (United States)

    2013-09-20

    ... CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD Senior Executive Service Performance Review Board... change in the membership of the Senior Executive Service Performance Review Board for the Chemical Safety... Senior Executive Service (SES) and makes recommendations as to final annual performance ratings for...

  17. 75 FR 1028 - Senior Executive Service Performance Review Board

    Science.gov (United States)

    2010-01-08

    ... CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD Senior Executive Service Performance Review Board... change in the membership of the Senior Executive Service Performance Review Board for the Chemical Safety... performance ratings of members of the Senior Executive Service (SES) and makes recommendations as to final...

  18. Metacognitive monitoring and control in visual change detection: Implications for situation awareness and cognitive control

    Science.gov (United States)

    McAnally, Ken I.; Morris, Adam P.; Best, Christopher

    2017-01-01

    Metacognitive monitoring and control of situation awareness (SA) are important for a range of safety-critical roles (e.g., air traffic control, military command and control). We examined the factors affecting these processes using a visual change detection task that included representative tactical displays. SA was assessed by asking novice observers to detect changes to a tactical display. Metacognitive monitoring was assessed by asking observers to estimate the probability that they would correctly detect a change, either after study of the display and before the change (judgement of learning; JOL) or after the change and detection response (judgement of performance; JOP). In Experiment 1, observers failed to detect some changes to the display, indicating imperfect SA, but JOPs were reasonably well calibrated to objective performance. Experiment 2 examined JOLs and JOPs in two task contexts: with study-time limits imposed by the task or with self-pacing to meet specified performance targets. JOPs were well calibrated in both conditions as were JOLs for high performance targets. In summary, observers had limited SA, but good insight about their performance and learning for high performance targets and allocated study time appropriately. PMID:28915244

  19. Study of load change control in PWRs using the methods of linear optimal control

    International Nuclear Information System (INIS)

    Yang, T.

    1983-01-01

    This thesis investigates the application of modern control theory to the problem of controlling load changes in PWR power plants. A linear optimal state feedback scheme resulting from linear optimal control theory with a quadratic cost function is reduced to a partially decentralized control system using mode preservation techniques. Minimum information transfer among major components of the plant is investigated to provide an adequate coordination, simple implementation, and a reliable control system. Two control approaches are proposed: servo and model following. Each design considers several information structures for performance comparison. Integrated output error has been included in the control systems to accommodate external and plant parameter disturbances. In addition, the cross limit feature, specific to certain modern reactor control systems, is considered in the study to prevent low pressure reactor trip conditions. An 11th order nonlinear model for the reactor and boiler is derived based on theoretical principles, and simulation tests are performed for 10% load change as an illustration of system performance

  20. Vegetation physiology controls continental water cycle responses to climate change

    Science.gov (United States)

    Lemordant, L. A.; Swann, A. L. S.; Cook, B.; Scheff, J.; Gentine, P.

    2017-12-01

    Abstract per se:Predicting how climate change will affect the hydrologic cycle is of utmost importance for ecological systems and for human life and activities. A typical perspective is that global warming will cause an intensification of the mean state, the so-called "dry gets drier, wet gets wetter" paradigm. While this result is robust over the oceans, recent works suggest it may be less appropriate for terrestrial regions. Using Earth System Models (ESMs) with decoupled surface (vegetation physiology, PHYS) and atmospheric (radiative, ATMO) CO2 responses, we show that the CO2 physiological response dominates the change in the continental hydrologic cycle compared to radiative and precipitation changes due to increased atmospheric CO2, counter to previous assumptions. Using multiple linear regression analysis, we estimate the individual contribution of each of the three main drivers, precipitation, radiation and physiological CO2 forcing (see attached figure). Our analysis reveals that physiological effects dominate changes for 3 key indicators of dryness and/or vegetation stress (namely LAI, P-ET and EF) over the largest fraction of the globe, except for soil moisture which exhibits a more complex response. This highlights the key role of vegetation in controlling future terrestrial hydrologic response.Legend of the Figure attached:Decomposition along the three main drivers of LAI (a), P-ET (b), EF (c) in the control run. Green quantifies the effect of the vegetation physiology based on the run PHYS; red and blue quantify the contribution of, respectively, net radiation and precipitation, based on multiple linear regression in ATMO. Pie charts show for each variable the fraction (labelled in %) of land under the main influence (more than 50% of the changes is attributed to this driver) of one the three main drivers (green for grid points dominated by vegetation physiology, red for grid points dominated by net radiation, and blue for grid points dominated by the

  1. Prototype of a control board solar tracking mechanism on a shaft; Prototipo de una tarjeta de control del mecanismo de seguimiento solar en un eje

    Energy Technology Data Exchange (ETDEWEB)

    Ramos Berumen, Carlos; Ramirez Benitez, Juan Rafael; Lopez Perez, Manuel de Jesus; Beltran Adan, Jose; Lagunas Mendoza, Javier [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2010-11-15

    A solar concentrator prototype of Parabolic Trough (PT) for solar process heat generation has been designed, manufactured and put into operation by the Instituto de Investigaciones Electricas. By means of a sun tracking mechanism controlled by an automatic device, the PT is moving from East to West during the day then this way the solar energy is focused continually over the lineal receiver. Such movement is reached thanks to the electronic module fitted with special software. In this paper, the design of an electronic module based on calculation algorithm of the sun position along the day and over the year which controls the PT sun tracking is presented. The main purpose of the development is to integrate a control system which is using the algorithm of low cost (it was tested in a commercial system with success). [Spanish] El Instituto de Investigaciones Electricas (IIE) ha disenado, fabricado y puesto en operacion un prototipo de concentrador solar de canal parabolico para la generacion de calor de proceso. La tecnologia termosolar a concentracion de canal parabolica mantiene el concentrador moviendose de este a oeste durante el dia, enfocando continuamente el sol en el receptor lineal, mediante un mecanismo y un control automatico que permite el seguimiento aparente del sol. Se ha desarrollado el software para el control del mecanismo de seguimiento solar. En este articulo se presenta el diseno de un modulo electronico que controla el mecanismo de seguimiento solar de un canal parabolico, el cual tiene sus bases en un algoritmo que calcula la posicion del sol durante todo el dia y a lo largo del ano. El proposito principal es integrar un sistema de control de bajo costo, que utilice el algoritmo desarrollado por el IIE, el cual fue probado con exito en un sistema comercial para el seguimiento solar de un canal parabolico.

  2. Randomised controlled trials and changing public health practice

    Directory of Open Access Journals (Sweden)

    Anne Cockcroft

    2017-05-01

    Full Text Available Abstract One reason for doing randomised controlled trials (RCTs is that experiments can be convincing. Early epidemiological experimenters, such as Jenner and the smallpox vaccine and Snow and his famous Broad Street pump handle, already knew the answer they were demonstrating; they used the experiments as knowledge translation devices to convince others. More sophisticated modern experiments include cluster randomised controlled trials (CRCTs for experiments in the public health setting. The knowledge translation value remains: RCTs and CRCTs can potentially stimulate changes of practice among stakeholders. Capitalising on the knowledge translation value of RCTs requires more than the standard reporting of trials. Those who are convinced by a trial and want to act, need to know how the trial relates to their own context, what contributed to success, and what might make it even more effective. Implementation research unpacks the back-story, examining how and why an intervention worked. The Camino Verde trial of community mobilisation for control of dengue reported a significant impact on entomological indices of the Aedes aegypti vector, and on serological dengue virus infection and self-reported dengue cases. This important study should lead to studies of similar interventions in other contexts, and ultimately to changes in dengue control practices. This supplement is the back-story of the trial, providing information to help researchers and planners to make use of the trial findings. Background articles include the full protocol, a systematic review of CRCTs of approaches for Aedes aegypti control, epidemiological and entomological findings from the baseline survey, and how baseline findings were used to set up the intervention. Secondary analyses of the entomological findings examine associations with the use of the larvicide temephos, and the impact of the intervention in different conditions of water supply and seasons. Other articles

  3. Phase change thermal control materials, method and apparatus

    Science.gov (United States)

    Buckley, Theresa M. (Inventor)

    2001-01-01

    An apparatus and method for metabolic cooling and insulation of a user in a cold environment. In its preferred embodiment the apparatus is a highly flexible composite material having a flexible matrix containing a phase change thermal storage material. The apparatus can be made to heat or cool the body or to act as a thermal buffer to protect the wearer from changing environmental conditions. The apparatus may also include an external thermal insulation layer and/or an internal thermal control layer to regulate the rate of heat exchange between the composite and the skin of the wearer. Other embodiments of the apparatus also provide 1) a path for evaporation or direct absorption of perspiration from the skin of the wearer for improved comfort and thermal control, 2) heat conductive pathways within the material for thermal equalization, 3) surface treatments for improved absorption or rejection of heat by the material, and 4) means for quickly regenerating the thermal storage capacity for reuse of the material. Applications of the composite materials are also described which take advantage of the composite's thermal characteristics. The examples described include a diver's wet suit, ski boot liners, thermal socks, gloves and a face mask for cold weather activities, and a metabolic heating or cooling blanket useful for treating hypothermia or fever patients in a medical setting and therapeutic heating or cooling orthopedic joint supports.

  4. The board's role in organizational finance.

    Science.gov (United States)

    Curran, Connie R

    2010-01-01

    Health care reform will result in significant changes in reimbursement with much greater emphasis put on primary care, home care, and other types of non-acute care. The changes in reimbursement will necessitate significant changes in organizational structure and operations. It is essential board members keep current in their knowledge of health care finance so they can execute their responsibilities for the financial health of the organization. The board must ensure that the budget is aligned with the organization's financial objectives and monitor the financial performance. It is essential the chief nursing officer (CNO) contributes to the board's understanding of the financial health of the organization. The board of trustees will more effectively execute their financial responsibilities with the input of nurse trustees and the CNO.

  5. 78 FR 73586 - Senior Executive Service Performance Review Board (PRB) and Executive Resources Board (ERB...

    Science.gov (United States)

    2013-12-06

    ...: Performance Review Board Leland L. Gardner, Chairman Rachel D. Campbell, Member Craig M. Keats, Member Lucille Marvin, Alternate Member Executive Resources Board Rachel D. Campbell, Chairman Lucille Marvin, Member Joseph H. Dettmar, Alternate Member These changes to the PRB and ERB membership are due to the departure...

  6. Configuration management and change control at Cernavoda NPP Unit 1

    International Nuclear Information System (INIS)

    Gheorghiu, Virgil

    1998-01-01

    Effective configuration management requires that: 1. the design basis of station structures, systems, equipment and components be maintained at all times; 2. only accurate and approved technical, operational and maintenance information is available for performance of station activities; 3. correct operating manuals, flowsheets, operating sequences, operating task and training manuals are prepared and maintained currently. Design Engineering at Cernavoda NPP is primarily the responsibility of the Engineering Services Department supported if necessary by the Technical Unit. The key elements needed to achieve excellence in design engineering support for station operation, including design process and implementation of modification are investigated by answering the questions: 1. What is the station expectation for design change control?; 2. How is this provided?. Concerning design, the following aspects are stressed: Detailed Design Development; Design Verification; Design Change Implementation. The present design process is auditable and well documented. It consists of detailed design development, and design output documents such as applicable drawings, procurement specifications, installation and test requirement and the results of design and safety reviews. The design change implementation does not proceed until an Inspection Test Plan has been developed and approved as required. (author)

  7. 75 FR 80039 - U.S. Travel and Tourism Advisory Board: Meeting of the U.S. Travel and Tourism Advisory Board

    Science.gov (United States)

    2010-12-21

    ... DEPARTMENT OF COMMERCE International Trade Administration U.S. Travel and Tourism Advisory Board: Meeting of the U.S. Travel and Tourism Advisory Board AGENCY: International Trade Administration, U.S... agenda for an open meeting of the U.S. Travel and Tourism Advisory Board (Board). The agenda may change...

  8. 76 FR 21703 - U.S. Travel and Tourism Advisory Board: Meeting of the U.S. Travel and Tourism Advisory Board

    Science.gov (United States)

    2011-04-18

    ... DEPARTMENT OF COMMERCE International Trade Administration U.S. Travel and Tourism Advisory Board: Meeting of the U.S. Travel and Tourism Advisory Board AGENCY: International Trade Administration, U.S... agenda for an open meeting of the U.S. Travel and Tourism Advisory Board (Board). The agenda may change...

  9. 76 FR 53666 - U.S. Travel and Tourism Advisory Board: Meeting of the U.S. Travel and Tourism Advisory Board

    Science.gov (United States)

    2011-08-29

    ... DEPARTMENT OF COMMERCE International Trade Administration U.S. Travel and Tourism Advisory Board: Meeting of the U.S. Travel and Tourism Advisory Board AGENCY: International Trade Administration, U.S... agenda for an open meeting of the U.S. Travel and Tourism Advisory Board (Board). The agenda may change...

  10. Ashtanga-Based Yoga Therapy Increases the Sensory Contribution to Postural Stability in Visually-Impaired Persons at Risk for Falls as Measured by the Wii Balance Board: A Pilot Randomized Controlled Trial

    Science.gov (United States)

    Haaz Moonaz, Steffany; Bittner, Ava K.

    2015-01-01

    Objective Persons with visual impairment (VI) are at greater risk for falls due to irreparable damage to visual sensory input contributing to balance. Targeted training may significantly improve postural stability by strengthening the remaining sensory systems. Here, we evaluate the Ashtanga-based Yoga Therapy (AYT) program as a multi-sensory behavioral intervention to develop postural stability in VI. Design A randomized, waitlist-controlled, single-blind clinical trial Methods The trial was conducted between October 2012 and December 2013. Twenty-one legally blind participants were randomized to an 8-week AYT program (n = 11, mean (SD) age = 55(17)) or waitlist control (n=10, mean (SD) age = 55(10)). AYT subjects convened for one group session at a local yoga studio with an instructor and two individual home-based practice sessions per week for a total of 8 weeks. Subjects completed outcome measures at baseline and post-8 weeks of AYT. The primary outcome, absolute Center of Pressure (COP), was derived from the Wii Balance Board (WBB), a standalone posturography device, in 4 sensory conditions: firm surface, eyes open (EO); firm surface, eyes closed (EC); foam surface, EO; and foam surface, EC. Stabilization Indices (SI) were computed from COP measures to determine the relative visual (SIfirm, SIfoam), somatosensory (SIEO, SIEC) and vestibular (SIV, i.e., FoamEC vs. FirmEO) contributions to balance. This study was not powered to detect between group differences, so significance of pre-post changes was assessed by paired samples t-tests within each group. Results Groups were equivalent at baseline (all p > 0.05). In the AYT group, absolute COP significantly increased in the FoamEO (t(8) = -3.66, p = 0.01) and FoamEC (t(8) = -3.90, p = 0.01) conditions. Relative somatosensory SIEO (t(8) = -2.42, p = 0.04) and SIEC (t(8) = -3.96, p = 0.01), and vestibular SIV (t(8) = -2.47, p = 0.04) contributions to balance increased significantly. As expected, no significant

  11. Ashtanga-Based Yoga Therapy Increases the Sensory Contribution to Postural Stability in Visually-Impaired Persons at Risk for Falls as Measured by the Wii Balance Board: A Pilot Randomized Controlled Trial.

    Science.gov (United States)

    Jeter, Pamela E; Haaz Moonaz, Steffany; Bittner, Ava K; Dagnelie, Gislin

    2015-01-01

    Persons with visual impairment (VI) are at greater risk for falls due to irreparable damage to visual sensory input contributing to balance. Targeted training may significantly improve postural stability by strengthening the remaining sensory systems. Here, we evaluate the Ashtanga-based Yoga Therapy (AYT) program as a multi-sensory behavioral intervention to develop postural stability in VI. A randomized, waitlist-controlled, single-blind clinical trial. The trial was conducted between October 2012 and December 2013. Twenty-one legally blind participants were randomized to an 8-week AYT program (n = 11, mean (SD) age = 55(17)) or waitlist control (n=10, mean (SD) age = 55(10)). AYT subjects convened for one group session at a local yoga studio with an instructor and two individual home-based practice sessions per week for a total of 8 weeks. Subjects completed outcome measures at baseline and post-8 weeks of AYT. The primary outcome, absolute Center of Pressure (COP), was derived from the Wii Balance Board (WBB), a standalone posturography device, in 4 sensory conditions: firm surface, eyes open (EO); firm surface, eyes closed (EC); foam surface, EO; and foam surface, EC. Stabilization Indices (SI) were computed from COP measures to determine the relative visual (SIfirm, SIfoam), somatosensory (SIEO, SIEC) and vestibular (SIV, i.e., FoamEC vs. FirmEO) contributions to balance. This study was not powered to detect between group differences, so significance of pre-post changes was assessed by paired samples t-tests within each group. Groups were equivalent at baseline (all p > 0.05). In the AYT group, absolute COP significantly increased in the FoamEO (t(8) = -3.66, p = 0.01) and FoamEC (t(8) = -3.90, p = 0.01) conditions. Relative somatosensory SIEO (t(8) = -2.42, p = 0.04) and SIEC (t(8) = -3.96, p = 0.01), and vestibular SIV (t(8) = -2.47, p = 0.04) contributions to balance increased significantly. As expected, no significant changes from EO to EC conditions were

  12. Ashtanga-Based Yoga Therapy Increases the Sensory Contribution to Postural Stability in Visually-Impaired Persons at Risk for Falls as Measured by the Wii Balance Board: A Pilot Randomized Controlled Trial.

    Directory of Open Access Journals (Sweden)

    Pamela E Jeter

    Full Text Available Persons with visual impairment (VI are at greater risk for falls due to irreparable damage to visual sensory input contributing to balance. Targeted training may significantly improve postural stability by strengthening the remaining sensory systems. Here, we evaluate the Ashtanga-based Yoga Therapy (AYT program as a multi-sensory behavioral intervention to develop postural stability in VI.A randomized, waitlist-controlled, single-blind clinical trial.The trial was conducted between October 2012 and December 2013. Twenty-one legally blind participants were randomized to an 8-week AYT program (n = 11, mean (SD age = 55(17 or waitlist control (n=10, mean (SD age = 55(10. AYT subjects convened for one group session at a local yoga studio with an instructor and two individual home-based practice sessions per week for a total of 8 weeks. Subjects completed outcome measures at baseline and post-8 weeks of AYT. The primary outcome, absolute Center of Pressure (COP, was derived from the Wii Balance Board (WBB, a standalone posturography device, in 4 sensory conditions: firm surface, eyes open (EO; firm surface, eyes closed (EC; foam surface, EO; and foam surface, EC. Stabilization Indices (SI were computed from COP measures to determine the relative visual (SIfirm, SIfoam, somatosensory (SIEO, SIEC and vestibular (SIV, i.e., FoamEC vs. FirmEO contributions to balance. This study was not powered to detect between group differences, so significance of pre-post changes was assessed by paired samples t-tests within each group.Groups were equivalent at baseline (all p > 0.05. In the AYT group, absolute COP significantly increased in the FoamEO (t(8 = -3.66, p = 0.01 and FoamEC (t(8 = -3.90, p = 0.01 conditions. Relative somatosensory SIEO (t(8 = -2.42, p = 0.04 and SIEC (t(8 = -3.96, p = 0.01, and vestibular SIV (t(8 = -2.47, p = 0.04 contributions to balance increased significantly. As expected, no significant changes from EO to EC conditions were found

  13. SMART Boards Rock

    Science.gov (United States)

    Giles, Rebecca M.; Shaw, Edward L.

    2011-01-01

    SMART Board is a technology that combines the functionality of a whiteboard, computer, and projector into a single system. The interactive nature of the SMART Board offers many practical uses for providing an introduction to or review of material, while the large work area invites collaboration through social interaction and communication. As a…

  14. 77 FR 2541 - Board Meeting

    Science.gov (United States)

    2012-01-18

    ... FARM CREDIT SYSTEM INSURANCE CORPORATION Board Meeting AGENCY: Farm Credit System Insurance Corporation Board; Regular Meeting. SUMMARY: Notice is hereby given of the regular meeting of the Farm Credit System Insurance Corporation Board (Board). DATE AND TIME: The meeting of the Board will be held at the...

  15. Controlled flavour changing neutral couplings in two Higgs Doublet models

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Joao M.; Branco, Gustavo C.; Nebot, Miguel [Instituto Superior Tecnico (IST), Lisboa Univ., Departamento de Fisica e Centro de Fisica Teorica de Particulas (CFTP), Lisboa (Portugal); Botella, Francisco J.; Cornet-Gomez, Fernando [Universitat de Valencia-CSIC, Departament de Fisica Teorica y IFIC, Burjassot (Spain)

    2017-09-15

    We propose a class of two Higgs doublet models where there are flavour changing neutral currents (FCNC) at tree level, but under control due to the introduction of a discrete symmetry in the full Lagrangian. It is shown that in this class of models, one can have simultaneously FCNC in the up and down sectors, in contrast to the situation encountered in the renormalisable and minimal flavour violating 2HDM models put forward by Branco et al. (Phys Lett B 380:119, 1996). The intensity of FCNC is analysed and it is shown that in this class of models one can respect all the strong constraints from experiment without unnatural fine-tuning. It is pointed out that the additional sources of flavour and CP violation are such that they can enhance significantly the generation of the Baryon asymmetry of the Universe, with respect to the standard model. (orig.)

  16. Work index determination with changing of control screen

    International Nuclear Information System (INIS)

    Noaparast, M.; Delavarian, M.

    2001-01-01

    Work index is a measure to define ores/minerals grind ability which is significantly used in Bond (1952) to calculate the required energy of ores' comminution. Work index for any material is experimentally calculated under specific conditions and it is a certain value. To understand the effect of changing control screen in work index calculation, three different ores Alam-Kuh Pb-Zn ore, Sarcheshmeh Cu Ore, and Abe-Garm Region Dolomite were tested, using 425, 212,150 and 100 micron screens (totally 12 sets of tests). Results showed that the work index values increase with the increases of screen size. The relation between root of screen size and fines produced per revolution of mill and also, screen size and size of products out of which 80% passes through this size appeared to be linear for all three different ores. The constants of these linear equations were estimated using regression technique

  17. Changes to TSR control set due to changes in mission and lessons learned

    International Nuclear Information System (INIS)

    Foppe, T.L.; Olinger, S.J.

    1999-01-01

    Previous Technical Safety Requirements (TSRs) established to support plutonium production activities at the Rocky Flats Environmental Technology Site (RFETS) were heavily focused on engineered safety features that would mitigate potential accidents. With the change in mission in 1992 to Site closure, and considering antiquated equipment nearing the end of their useful life, a change in philosophy was adopted to emphasize preventive controls that are mostly administrative. The new Administrative Controls (ACs) developed in the last few years include discrete attributes of safety management programs (SMPs) that are specifically credited to prevent or mitigate an accident, and include requirements on handling individual deviations, programmatic deficiencies, and TSR AC violations. The primary benefit of these changes is fewer requirements on equipment that allow the contractor more flexibility to maintain the defense-in-depth safety systems in a more cost-effective manner. A disadvantage of these new ACs is that implementation has become cumbersome and difficult to manage, e.g., resulted in an increased burden of demonstrating compliance and required an additional infrastructure to track deviations and deficiencies. In order to improve the efficiency of the authorization basis (AB) process to support accelerated Site closure according to the 2006 Plan, the Site has recently modified the ABs to better focus on the programmatic elements that were credited in the accident analyses, and to rely on the Integrated Safety Management System to implement SMPs via one general TSR AC requirement. At the request of DOE/RFFO, a self-assessment of the Rocky Flats AB program was performed in November 1998 by Victor Stello, DOE Headquarters, along with representatives from other DOE sites and Defense Programs. Results of this self-assessment confirmed that the proposed AC changes would be beneficial and provided specific recommendations

  18. Controllable biomimetic adhesion using embedded phase change material

    International Nuclear Information System (INIS)

    Krahn, J; Sameoto, D; Menon, C

    2011-01-01

    In many cases, such as in the instance of climbing robots or temporary adhesives, there is the need to be able to dynamically control the level of adhesion a biomimetic dry adhesive can provide. In this study, the effect of changing the backing layer stiffness of a dry adhesive is examined. Embedding a phase change material within the backing of a synthetic dry adhesive sheet allows the stiffness to be tailored at different points of a preload and adhesion cycle. Larger contact areas and more equal load sharing between adhesive fibres can be achieved by increasing the backing layer stiffness after initial deformation when the adhesive backing is loaded in its softened state. Adhesion behaviour is examined when the backing layer is maintained in solid and softened phases during complete load cycles and for load cycles under the condition of contact with the softened phase backing followed by pull-off during the solid phase. Absolute adhesion force is increased for trials in which a soft backing layer hardens prior to pull-off. This effect is due to the increased contact area made between the rounded probe and the softened material during preloading and the more equal load sharing condition during pull-off when the backing layer becomes stiff again

  19. Medical licensing board characteristics and physician discipline: an empirical analysis.

    Science.gov (United States)

    Law, Marc T; Hansen, Zeynep K

    2010-02-01

    This article investigates the relationship between the characteristics of medical licensing boards and the frequency with which boards discipline physicians. Specifically, we take advantage of variation in the structure of medical licensing boards between 1993 and 2003 to determine the effect of organizational and budgetary independence, public oversight, and resource constraints on rates of physician discipline. We find that larger licensing boards, boards with more staff, and boards that are organizationally independent from state government discipline doctors more frequently. Public oversight and political control over board budgets do not appear to influence the extent to which medical licensing boards discipline doctors. These findings are broadly consistent with theories of regulatory behavior that emphasize the importance of bureaucratic autonomy for effective regulatory enforcement.

  20. Are board meetings proactive or reactive to performance?

    Directory of Open Access Journals (Sweden)

    Yi Wang

    2008-11-01

    Full Text Available The purpose of this paper is to investigate the relationship between the intensity of board activity, as represented by board meeting frequency, and firm financial performance, using data from the top 500 Australian companies. Firm performance measures include return on assets, return on equity and shareholder return; several control variables are introduced in the analysis. The results indicate that board meeting frequency has a positive impact on subsequent shareholder return. Regarding the explanatory factors for the level of board activity, it is reported that firms with more board committees tend to have relatively more board and committee meetings; firms with larger boards have less board meetings. In addition, lower managerial ownership leads to more committee meetings.

  1. Agreement between the Board of Control of Ferris State College and the Ferris College Faculty Association (MEA/NEA), November 12, 1984-June 30, 1987.

    Science.gov (United States)

    Michigan Education Association, East Lansing.

    The collective bargaining agreement between the Board of Ferris State College and Ferris Faculty Association Chapter (507 members), an affiliate of the National Education Association and the Michigan Education Association, covering the period November 12, 1984-June 30, 1987 is presented. Items covered in the agreement include: unit recognition,…

  2. A Wireless Object Location Detector Enabling People with Developmental Disabilities to Control Environmental Stimulation through Simple Occupational Activities with Nintendo Wii Balance Boards

    Science.gov (United States)

    Shih, Ching-Hsiang; Chang, Man-Ling

    2012-01-01

    The latest researches have adopted software technology, turning the Nintendo Wii Balance Board into a high performance standing location detector with a newly developed standing location detection program (SLDP). This study extended SLDP functionality to assess whether two people with developmental disabilities would be able to actively perform…

  3. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2002-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Luc Vos with regard to advancement. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 14 to 28 June 2002. Human Resources Division Tel. 74128

  4. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2008-01-01

    The Joint Advisory Appeals Board has examined the internal appeal lodged by a member of the personnel against the decision to grant him only a periodic one-step advancement for the 2006 reference year. The person concerned has not objected to the report of the Board and the final decision of the Director-General being brought to the attention of the members of the personnel. In application of Article R VI 1.18 of the Staff Regulations, these documents will therefore be posted on the notice board of the Main building (bldg. 500) from 1 September to 14 September 2008. Human Resources Department (73911)

  5. Joint Advisory Appeals Board

    CERN Multimedia

    2003-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Poul Frandsen concerning his assimilation into the new career structure. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 13 to 24 January 2003. Human Resources Division Tel. 74128

  6. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Personnel Division

    1999-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Joào Bento with regard to residential category. As the appellant has not objected, the recommendations of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article RÊVIÊ1.20 of the Staff Regulations.The relevant documents will therefore be posted on the notice boards of the Administration Building (N¡ 60) from 29 October to 12 November 1999.Personnel DivisionTel. 74128

  7. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2006-01-01

    The Joint Advisory Appeals Board was convened to examine an appeal lodged by a member of the personnel with regard to advancement. The person concerned has requested that the report of the Board and the final decision of the Director-General be brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (No. 60) from 24 March to 10 April 2006. Human Resources Department Tel. 74128

  8. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2007-01-01

    The Joint Advisory Appeals Board was convened to examine an internal appeal lodged by a member of the personnel with regard to the decision not to grant him an indefinite contract. The person concerned has requested that the report of the Board and the final decision of the Director-General be brought to the notice of the members of the personnel, in accordance with Article R VI 1.18 of the Staff Regulations. The relevant documents will therefore be posted on the notice board of the Main building (Bldg. 60) from 24 September to 7 October 2007. Human Resources Department

  9. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2001-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Olivier Francis Martin with regard to indefinite contract. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 8 to 25 June 2001.

  10. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2002-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Jack Blanchard with regard to 'non recognition of specific functions'. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 12th to 26th April 2002. Human Resources Division Tel. 74128

  11. Joint Advisory Appeals Board

    CERN Multimedia

    2003-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mrs Judith Igo-Kemenes concerning the application of procedures foreseen by Administrative Circular N§ 26 (Rev. 3). As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 6 to 20 June 2003. Human Resources Division Tel. 74128

  12. Joint Advisory Appeals Board

    CERN Multimedia

    2004-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mrs Maria DIMOU with regard to a periodic one-step increase. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 30 April to 14 May 2004. Human Resources Department Tel. 74128

  13. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2001-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Joël Lahaye with regard to non-resident allowance. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 18 May to 1st June 2001.

  14. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2008-01-01

    The Joint Advisory Appeals Board has examined the internal appeal lodged by a member of the personnel with regard to the decision not to award him a periodic one-step advancement for the 2006 reference year. The person concerned has not objected to the report of the Board and the final decision of the Director-General being brought to the notice of the members of the personnel. In application of Article R VI 1.18 of the Staff Regulations, these documents will therefore be posted on the notice board of the Main building (Bldg. 500) from 17 March to 30 March 2008. Human Resources Department Tel. 73911

  15. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2002-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Bertrand Nicquevert with regard to the non-resident allowance. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 29 November to 13 December 2002. Human Resources Division Tel. 74128

  16. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2002-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Antonio Millich with regard to advancement. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 27 September to 11 October 2002. Human Resources Division Tel. 74128

  17. Joint Advisory Appeals Board

    CERN Multimedia

    Human Resources Department

    2005-01-01

    The Joint Advisory Appeals Board was convened to examine an appeal lodged by a member of the personnel with regard to a periodic one-step increase. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 1 to 15 April 2005. Human Resources Department Tel. 74128

  18. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2008-01-01

    The Joint Advisory Appeals Board has examined the internal appeal lodged by a member of the personnel against the decision to grant him only a periodic one-step advancement for the 2006 reference year. The person concerned has not objected to the report of the Board and the final decision of the Director-General being brought to the attention of the members of the personnel. In application of Article R VI 1.18 of the Staff Regulations, these documents will therefore be posted on the notice board of the Main Building (Bldg. 500) from 1 September to 14 September 2008. Human Resources Department (73911)

  19. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2002-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Gert Jan Bossen with regard to dependent child allowance. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 1st to 15 March 2002. Human Resources Division Tel. 74128

  20. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2008-01-01

    The Joint Advisory Appeals Board has examined the internal appeal lodged by a member of the personnel with regard to the decision not to grant him an indefinite contract. The person concerned has not objected to the report of the Board and the final decision of the Director-General being brought to the notice of the members of the personnel. In application of Article R VI 1.18 of the Staff Regulations, these documents will therefore be posted on the notice board of the Main Building (Bldg. 500) from 26 May to 6 June 2008. Human Resources Department (73911)

  1. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2002-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Serge Peraire with regard to exceptional advancement. As the appellant has not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 17 to 31 May 2002. Human Resources Division Tel. 74128

  2. Joint Advisory Appeals Board

    CERN Multimedia

    HR Department

    2008-01-01

    The Joint Advisory Appeals Board was convened to examine an internal appeal lodged by a member of the personnel with regard to the decision not to grant him an indefinite contract. The person concerned has not objected to the report of the Board and the final decision of the Director-General being brought to the notice of the members of the personnel, in accordance with Article R VI 1.18 of the Staff Regulations. These documents will therefore be posted on the notice board of the Main Building (Bldg. 60) from 21 January to 3 February 2008. Human Resources Department (73911)

  3. Primer printed circuit boards

    CERN Document Server

    Argyle, Andrew

    2009-01-01

    Step-by-step instructions for making your own PCBs at home. Making your own printed circuit board (PCB) might seem a daunting task, but once you master the steps, it's easy to attain professional-looking results. Printed circuit boards, which connect chips and other components, are what make almost all modern electronic devices possible. PCBs are made from sheets of fiberglass clad with copper, usually in multiplelayers. Cut a computer motherboard in two, for instance, and you'll often see five or more differently patterned layers. Making boards at home is relatively easy

  4. Joint Advisory Appeals Board

    CERN Multimedia

    2003-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Aloïs Girardoz with regard to classification and advancement. As the appellant has not objected, the Board's report and the Director-General's decision will be brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 15 to 29 August 2003. Human Resources Division Tel. 74128

  5. Improving plasma shaping accuracy through consolidation of control model maintenance, diagnostic calibration, and hardware change control

    International Nuclear Information System (INIS)

    Baggest, D.S.; Rothweil, D.A.; Pang, S.

    1995-12-01

    With the advent of more sophisticated techniques for control of tokamak plasmas comes the requirement for increasingly more accurate models of plasma processes and tokamak systems. Development of accurate models for DIII-D power systems, vessel, and poloidal coils is already complete, while work continues in development of general plasma response modeling techniques. Increased accuracy in estimates of parameters to be controlled is also required. It is important to ensure that errors in supporting systems such as diagnostic and command circuits do not limit the accuracy of plasma parameter estimates or inhibit the ability to derive accurate plasma/tokamak system models. To address this issue, we have developed more formal power systems change control and power system/magnetic diagnostics calibration procedures. This paper discusses our approach to consolidating the tasks in these closely related areas. This includes, for example, defining criteria for when diagnostics should be re-calibrated along with required calibration tolerances, and implementing methods for tracking power systems hardware modifications and the resultant changes to control models

  6. Controlling engineering project changes for multi-unit, multi-site standardized nuclear power plants

    International Nuclear Information System (INIS)

    Randall, E.; Boddeker, G.; McGugin, H.; Strother, E.; Waggoner, G.

    1978-01-01

    Multibillioin dollar multiple nuclear power plant projects have numerous potential sources of engineering changes. The majority of these are internally generated changes, client generated changes, and changes from construction, procurement, other engineering organizations, and regulatory organizations. For multiunit, multisite projects, the use of a standardized design is cost effective. Engineering changes can then be controlled for a single standardized design, and the unit or site unique changes can be treated as deviations. Once an effective change procedure is established for change control of the standardized design, the same procedures can be used for control of unit or site unique changes

  7. Variation of Particle Control with Changes in Divertor Geometry

    International Nuclear Information System (INIS)

    Petrie, T W; Allen, S L; Brooks, N H; Fenstermacher, M E; Ferron, J R; Greenfield, C M; Groth, M; Hyatt, A W; Leonard, A W; Luce, T C; Mahdavi, M A; Murakami, M; Porter, G D; Rensink, M E; Schaffer, M J; Wade, M R; Watkins, J G; West, W P; Wolf, N S

    2004-01-01

    Recent experiments on DIII-D point to the importance of two factors in determining how effectively the deuterium particle inventory in a tokamak plasma can be controlled through pumping at the divertor target(s): (1) the divertor magnetic balance, i.e., the degree to which the divertor topology is single-null (SN) or double-null (DN), and (2) the direction of the of Bx(divergent)B ion drift with respect to the X-point(s). Changes in divertor magnetic balance near the DN shape have a much stronger effect on the particle exhaust rate at the inner divertor target(s) than on the particle exhaust rate at the outer divertor target(s). The particle exhaust rate for the DN shape is strongest at the outer strike point opposite the Bx(divergent)B ion particle drift direction. Our data suggests that the presence of Bx(divergent)B and ExB ion particle drifts in the scrapeoff layer (SOL) and divertors play an important role in the particle exhaust rates of DN and near-DN plasmas. Particle exhaust rates are shown to depend strongly on the edge (pedestal) density n e,PED . In the lower range of densities considered in this study, i.e., n e,PED / n GREENWALD <0.4, particle exhaust rates are also found to be approximately proportional to the deuterium recycling intensity in front of the respective plenum entrance. Our results are shown to have implications for particle control in ITER and other future tokamaks

  8. Variation of particle control with changes in divertor geometry

    International Nuclear Information System (INIS)

    Petrie, T.W.; Allen, S.L.; Brooks, N.H.; Fenstermacher, M.E.; Groth, M.; Porter, G.D.; Rensink, M.E.; Wolf, N.S.; Ferron, J.R.; Greenfield, C.M.; Hyatt, A.W.; Leonard, A.W.; Luce, T.C.; Mahdavi, M.A.; Schaffer, M.J.; West, W.P.; Murakami, M.; Wade, M.R.; Watkins, J.G.

    2005-01-01

    Recent experiments on DIII-D point to the importance of two factors in determining how effectively the deuterium particle inventory in a tokamak plasma can be controlled through pumping at the divertor target(s): (1) the divertor magnetic balance, i.e., the degree to which the divertor topology is single-null (SN) or double-null (DN), and (2) the direction of the of Bx∇B ion drift with respect to the X-point(s). Changes in divertor magnetic balance near the DN shape have a much stronger effect on the particle exhaust rate at the inner divertor target(s) than on the particle exhaust rate at the outer divertor target(s). The particle exhaust rate for the DN shape is strongest at the outer strike point opposite the Bx∇B ion particle drift direction. Our data suggests that the presence of Bx∇B and ExB ion particle drifts in the scrapeoff layer (SOL) and divertors play an important role in the particle exhaust rates of DN and near-DN plasmas. Particle exhaust rates are shown to depend strongly on the edge (pedestal) density n e,PED . In the lower range of densities considered in this study, i.e., n e,PED /n GREENWALD <0.4, particle exhaust rates are also found to be approximately proportional to the deuterium recycling intensity in front of the respective plenum entrance. Our results are shown to have implications for particle control in ITER and other future tokamaks. (author)

  9. Boat boarding ladder placement

    Science.gov (United States)

    1998-04-01

    Presented in three volumes; 'Boat Boarding Ladder Placement,' which explores safety considerations including potential for human contact with a rotating propeller; 'Boat Handhold Placement,' which explores essential principles and methods of fall con...

  10. Checking a printed board

    CERN Multimedia

    1977-01-01

    An 'Interactive Printed Circuit Board Design System' has been developed by a company in a Member-State. Printed circuits are now produced at the SB's surface treatment workshop using a digitized photo-plotter.

  11. Boarding school rules.

    Science.gov (United States)

    Griffiths, Matt

    2017-01-04

    Ofsted inspects and regulates services that care for children and young people, including boarding facilities. Medication management is an integral part of caring for children in boarding schools, and robust systems must be in place to pass inspection. These systems must cover how medicines are dispensed, administered and stored at the facility, risk assessments, identifying which pupils can manage their own medicines and the individual health needs of boarders, so that care plans can be put in place for children with specific needs.

  12. 77 FR 20009 - Meeting of the United States Travel and Tourism Advisory Board

    Science.gov (United States)

    2012-04-03

    ... Tourism Advisory Board AGENCY: International Trade Administration, U.S. Department of Commerce. ACTION... the United States Travel and Tourism Advisory Board (Board). The agenda may change to accommodate... and Tourism Advisory Board, Room 4043, 1401 Constitution Avenue NW., Washington, DC 20230, telephone...

  13. COLLABORATION BOARD (CB55)

    CERN Multimedia

    B. Cousins

    Open Access Publication Policy ATLAS had recently issued a short statement in support of open access publishing. The mood of the discussions in the December CMS Collaboration Board had appeared to be in favour and so it was being proposed that CMS issue the same statement as that made by ATLAS (the statement is attached to the agenda of this meeting). The Collaboration Board agreed. Election of the Chair of the Collaboration Board Following the agreement to shorten the terms of both the Spokesperson and the Collaboration Board Chair, and to introduce a longer overlap period between the election and the start of the term, the election for the next Collaboration Board Chair was due in December 2007. If the old standard schedule specified in the Constitution were adapted to this date, then the Board should be informed at the present meeting that the election was being prepared. However, it was felt that the experience of the previous year's election of the Spokesperson had shown that it would be desirable to...

  14. Internal medicine board certification and career pathways in Japan.

    Science.gov (United States)

    Koike, Soichi; Matsumoto, Masatoshi; Ide, Hiroo; Kawaguchi, Hideaki; Shimpo, Masahisa; Yasunaga, Hideo

    2017-05-08

    Establishing and managing a board certification system is a common concern for many countries. In Japan, the board certification system is under revision. The purpose of this study was to describe present status of internal medicine specialist board certification, to identify factors associated with maintenance of board certification and to investigate changes in area of practice when physicians move from hospital to clinic practice. We analyzed 2010 and 2012 data from the Survey of Physicians, Dentists and Pharmacists. We conducted logistic regression analysis to identify factors associated with the maintenance of board certification between 2010 and 2012. We also analyzed data on career transition from hospitals to clinics for hospital physicians with board certification. It was common for physicians seeking board certification to do so in their early career. The odds of maintaining board certification were lower in women and those working in locations other than academic hospitals, and higher in physicians with subspecialty practice areas. Among hospital physicians with board certification who moved to clinics between 2010 and 2012, 95.8% remained in internal medicine or its subspecialty areas and 87.7% maintained board certification but changed their practice from a subspecialty area to more general internal medicine. Revisions of the internal medicine board certification system must consider different physician career pathways including mid-career moves while maintaining certification quality. This will help to secure an adequate number and distribution of specialists. To meet the increasing demand for generalist physicians, it is important to design programs to train specialists in general practice.

  15. How well-run boards make decisions.

    Science.gov (United States)

    Useem, Michael

    2006-11-01

    In the aftermath of seismic debacles like those that toppled Enron and WorldCom, corporate boards have been shaken up and made over. More directors are independent these days, for instance, and corporations now disclose directors' salaries and committee members' names. Research shows that most of the changes are having a positive effect on companies' performance. They are primarily structural, though, and don't go to the heart of a board's work: making the choices that shape a firm's future. Which decisions boards own and how those calls are made are largely hidden from the public. As a result, boards are often unable to learn from the best governance practices of their counterparts at other companies. This article pulls back the curtain and provides an inside look. Drawing on interviews with board members and executives at 31 companies, along with a close examination of three boardroom decisions, the author identifies several formal processes that can help companies improve their decision making: creating calendars that specify when the board and the standing committees will consider key items; drafting charters that define the decisions committees are responsible for; and developing decision protocols that divvy up responsibilities between directors and executives. The author also identifies a number of informal decision-making principles: Items that are strategically significant and touch on the firm's core values should go to the board. Large decisions should be divided into small pieces, so the board can devote sufficient attention to each one. Directors must remain vigilant to ensure that their decisions are effectively implemented. The CEO and either the nonexecutive chair or the lead director should engage in ongoing dialogue regarding which decisions to take to the full board and when. And directors should challenge assumptions before making yes-or-no decisions on management proposals.

  16. Board Size and Board Independence: A Quantitative Study on Banking Industry in Pakistan

    Directory of Open Access Journals (Sweden)

    Kashif Rashid

    2014-12-01

    Full Text Available This paper aims to investigate the relationship of board independence and board size with productivity and efficiency of the listed banks on the Karachi Stock Exchange, Pakistan. There is a lack of consensus regarding impact of corporate governance practices in correspondence to number of board members and board independence in banking sector. The derived results of the study show that there is a positive relationship between board independence and bank profitability and efficiency. Independent directors play a crucial role in providing genuine advice during executive decision making process which is an important source for improving overall corporate governance. Moreover, results regarding the role of control variables suggest a positive relationship of the total assets and deposits of the firm with the firm’s performance supporting stewardship theory in the market.

  17. [Balance trainability using the Nintendo Wii balance board in sportive people].

    Science.gov (United States)

    Paukowits, S; Stöggl, T

    2014-03-01

    A multivariable training has a positive impact on balance skills and risk of injury. To date the effect of this training using the Nintendo Wii balance board in sportive people has not yet been investigated. The aim of this study was to investigate whether training with the Nintendo Wii balance board can improve balance skills. 20 people were randomized into a control and an intervention group each with 10 people who performed a unilateral stance test with eyes open and closed as well as the star excursion balance test before and after the intervention. The control group completed their usual sports and the intervention group an adjunct training with the Nintendo Wii balance board for 4 weeks. Adjunct Training using the Nintendo Wii Balance Board did not improve sportive people's balance skills significantly. The intervention group, however, attained better results in the star excursion balance test, whereas the control group did not show any changes. The unilateral stance tests did not provide significant differences before and after training within both groups. The use of the Nintendo Wii balance board should be further investigated by employing individual difficulty levels. © Georg Thieme Verlag KG Stuttgart · New York.

  18. Board Governance: Transformational Approaches Under Healthcare Reform.

    Science.gov (United States)

    Zastocki, Deborah K

    2015-01-01

    Previous successes of healthcare organizations and effective governance practices in the pre-reform environment are not predictive of future success. Healthcare has been through numerous phases of growth and development using tried-and-true strategies. The challenge is that our toolbox does not contain what is needed to build the future healthcare delivery systems required in the post-reform world. Healthcare has had a parochial focus at the local level, with some broadening of horizons at the state and national levels. But healthcare delivery is now a global issue that requires a totally different perspective, and many countries are confronting similar issues. US healthcare reform initiatives have far-reaching implications. Compounding the reform dynamics are the simultaneously occurring, gamechanging accelerants such as enabling information technologies and mobile health, new providers of healthcare, increased consumer demands, and limited healthcare dollars, to name a few. Operating in this turbulent environment requires transformational board, executive, and physician leadership because traditional ways of planning for incremental change and attempting to time those adjustments can prove disastrous. Creating the legacy healthcare system for tomorrow requires governing boards and executive leadership to act today as they would in the desired future system. Boards need to create a culture that fosters.innovation with a tolerance for risk and some failure. To provide effective governance, boards must essentially develop new skills, expertise, and ways of thinking. The rapid rate of change requires board members to possess certain capabilities, including the ability to deal with ambiguity and uncertainty while demonstrating flexibility and adaptability, all with a driving commitment to metrics and results. This requires development plans for both individual members and the overall board. In short, the board needs to function differently, particularly regarding the

  19. Computer board for radioactive ray test

    International Nuclear Information System (INIS)

    Zuo Mingfu

    1996-05-01

    The present status of the radioactive-ray test system for industrial applications, the newly designed computer board for overcoming the shortcomings of the current system are described. The functions, measurement principles and the feature of the board as well as the test results for this board are discussed. The board puts together many functions of the radioactive-ray test system, such as energy calibration, MCS, etc.. It also provides many other subordinate practical function such as motor control, ADC and so on. The board summarizes two sets of test parts into one and therefore composes a powerful unit for the system. Not only can it replace all units in a normal test system for signal analysis, signal process, data management, and motor control, but also can be used in more complex test systems, such as those for double source/double energy/double channel testing, multichannel testing, position testing and core positioning, etc.. The board makes the test system more easier to achieve miniaturization, computerization goals, and therefore improves the quality of the test and reduces the cost of the system. (10 refs., 8 figs.)

  20. Control of lupus nephritis by changes of gut microbiota.

    Science.gov (United States)

    Mu, Qinghui; Zhang, Husen; Liao, Xiaofeng; Lin, Kaisen; Liu, Hualan; Edwards, Michael R; Ahmed, S Ansar; Yuan, Ruoxi; Li, Liwu; Cecere, Thomas E; Branson, David B; Kirby, Jay L; Goswami, Poorna; Leeth, Caroline M; Read, Kaitlin A; Oestreich, Kenneth J; Vieson, Miranda D; Reilly, Christopher M; Luo, Xin M

    2017-07-11

    Systemic lupus erythematosus, characterized by persistent inflammation, is a complex autoimmune disorder with no known cure. Immunosuppressants used in treatment put patients at a higher risk of infections. New knowledge of disease modulators, such as symbiotic bacteria, can enable fine-tuning of parts of the immune system, rather than suppressing it altogether. Dysbiosis of gut microbiota promotes autoimmune disorders that damage extraintestinal organs. Here we report a role of gut microbiota in the pathogenesis of renal dysfunction in lupus. Using a classical model of lupus nephritis, MRL/lpr, we found a marked depletion of Lactobacillales in the gut microbiota. Increasing Lactobacillales in the gut improved renal function of these mice and prolonged their survival. We used a mixture of 5 Lactobacillus strains (Lactobacillus oris, Lactobacillus rhamnosus, Lactobacillus reuteri, Lactobacillus johnsonii, and Lactobacillus gasseri), but L. reuteri and an uncultured Lactobacillus sp. accounted for most of the observed effects. Further studies revealed that MRL/lpr mice possessed a "leaky" gut, which was reversed by increased Lactobacillus colonization. Lactobacillus treatment contributed to an anti-inflammatory environment by decreasing IL-6 and increasing IL-10 production in the gut. In the circulation, Lactobacillus treatment increased IL-10 and decreased IgG2a that is considered to be a major immune deposit in the kidney of MRL/lpr mice. Inside the kidney, Lactobacillus treatment also skewed the Treg-Th17 balance towards a Treg phenotype. These beneficial effects were present in female and castrated male mice, but not in intact males, suggesting that the gut microbiota controls lupus nephritis in a sex hormone-dependent manner. This work demonstrates essential mechanisms on how changes of the gut microbiota regulate lupus-associated immune responses in mice. Future studies are warranted to determine if these results can be replicated in human subjects.

  1. Board Certification in Counseling Psychology

    Science.gov (United States)

    Crowley, Susan L.; Lichtenberg, James W.; Pollard, Jeffrey W.

    2012-01-01

    Although specialty board certification by the American Board of Professional Psychology (ABPP) has been a valued standard for decades, the vast majority of counseling psychologists do not pursue board certification in the specialty. The present article provides a brief history of board certification in general and some historical information about…

  2. 78 FR 4847 - Board Meeting

    Science.gov (United States)

    2013-01-23

    ... FARM CREDIT SYSTEM INSURANCE CORPORATION Board Meeting AGENCY: Farm Credit System Insurance Corporation. SUMMARY: Notice is hereby given of the regular meeting of the Farm Credit System Insurance Corporation Board (Board). DATE AND TIME: The meeting of the Board will be held at the offices of the Farm...

  3. 77 FR 55837 - Board Meeting

    Science.gov (United States)

    2012-09-11

    ... FARM CREDIT SYSTEM INSURANCE CORPORATION Board Meeting AGENCY: Farm Credit System Insurance Corporation. ACTION: Regular meeting. SUMMARY: Notice is hereby given of the regular meeting of the Farm Credit System Insurance Corporation Board (Board). Date and Time: The meeting of the Board will be held...

  4. Support surface related changes in feedforward and feedback control of standing posture.

    Science.gov (United States)

    Mohapatra, Sambit; Kukkar, Komal K; Aruin, Alexander S

    2014-02-01

    The aim of the study was to investigate the effect of different support surfaces on feedforward and feedback components of postural control. Nine healthy subjects were exposed to external perturbations applied to their shoulders while standing on a rigid platform, foam, and wobble board with eyes open or closed. Electrical activity of nine trunk and leg muscles and displacements of the center of pressure were recorded and analyzed during the time frames typical of feedforward and feedback postural adjustments. Feedforward control of posture was characterized by earlier activation of anterior muscles when the subjects stood on foam compared to a wobble board or a firm surface. In addition, the magnitude of feedforward muscle activity was the largest when the foam was used. During the feedback control, anterior muscles were activated prior to posterior muscles irrespective of the nature of surface. Moreover, the largest muscle activity was seen when the supporting surface was foam. Maximum CoP displacement occurred when subjects were standing on a rigid surface. Altering support surface affects both feedforward and feedback components of postural control. This information should be taken into consideration in planning rehabilitation interventions geared towards improvement of balance. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Structure of the National Coal Board. V. The Purchasing and Stores Department

    Energy Technology Data Exchange (ETDEWEB)

    Templeman, C L

    1976-03-01

    The purpose of the Board's Purchasing and Stores Department is to provide a service so that the requirements of the users are met while at the same time the Board's purchasing, contracting, and control of stores are properly managed with the maximum economy for the industry as a whole. The department has been a pioneer in the fields of large-scale centralized purchasing and the application of computer techniques to the problems of procurement and storekeeping. The work will develop as the department continues to meet the industry's requirements in the changing technical and economic climate of the future.

  6. 7 CFR 1160.105 - Board.

    Science.gov (United States)

    2010-01-01

    ... and Orders; Milk), DEPARTMENT OF AGRICULTURE FLUID MILK PROMOTION PROGRAM Fluid Milk Promotion Order Definitions § 1160.105 Board. Board means the National Processor Advertising and Promotion Board established... Promotion Board or Board). ...

  7. JOINT ADVISORY APPEALS BOARD

    CERN Multimedia

    Human Resources Division

    2001-01-01

    The Joint Advisory Appeals Board was convened to examine the appeal lodged by Mr Neil Calder, Mrs Sudeshna Datta Cockerill, Mrs Andrée Fontbonne, Mrs Moniek Laurent and Mr Ulrich Liptow with regard to membership in the Pension Fund under the period with a Paid Associate contract, appeals dealt with on a collective basis. As the appellants have not objected, the report of the Board and the final decision of the Director-General are brought to the notice of the personnel in accordance with Article R VI 1.20 of the Staff Regulations. The relevant documents will therefore be posted on the notice boards of the Administration Building (N° 60) from 10 to 31 August 2001.

  8. Pension Fund Governing Board

    CERN Multimedia

    HR Department

    2008-01-01

    Note The CERN pension scheme is based on the principle of defined benefits, so beneficiaries continue to receive the benefits to which they are entitled in accordance with the Rules of the Pension Fund. This means that pension entitlements under the Rules are not directly affected by the financial crisis and the current economic situation. However, the adjustment of pensions to the cost of living is not automatic and, under the method applied since 2006, must take into account the Fund’s financial position. Meeting of the Pension Fund Governing Board The Pension Fund Governing Board held its eighth meeting at ESO in Garching, Germany (near Munich) on 24 October 2008. Before starting its work, the Governing Board had the privilege of hearing an opening address by Professor Tim de Zeeuw, the Director General of ESO. Professor de Zeeuw described the mission of ESO and the ambitious projects of his organisation, which performs astronomy observations using telescopes located in...

  9. Age-related changes in neural control of posture

    NARCIS (Netherlands)

    Papegaaij, Selma

    2016-01-01

    As we get older many physiological functions decline, including muscle strength, flexibility, and memory. Also in the aging brain there are changes, such as shrinkage of its volume. Since we need our brain to keep our balance while standing, it seems likely that these changes also affect our balance

  10. Unemployment Gap in the Currency Board Regime

    OpenAIRE

    Novak Kondić; Borivoje D. Krušković

    2013-01-01

    A currency board combines three elements: a fixed exchange rate between a country’s currency and an “anchor currency,” automatic convertibility, and a long-term commitment to the system, often made explicit in the central bank law. The main reason for countries to consider a currency board is to demonstrate that they are pursuing an anti-inflationary policy. The mechanism works through changes in the money supply, which lead to interest rate changes, which, in turn, encourage funds to move be...

  11. Software change control in the Sizewell B ISCO

    International Nuclear Information System (INIS)

    Johnson, A.

    1997-01-01

    Central to the control and instrumentation system of the Sizewell B nuclear power plant is a control, data acquisition and control system based on a distributed network of several hundred microprocessors. The system has been integrated into a single functional unity, and software modifications affecting one part of it have an effect on the other parts. The software modification and configuration processes are therefore kept as similar as possible. (A.K.)

  12. The association between length of emergency department boarding and mortality.

    Science.gov (United States)

    Singer, Adam J; Thode, Henry C; Viccellio, Peter; Pines, Jesse M

    2011-12-01

    Emergency department (ED) boarding has been associated with several negative patient-oriented outcomes, from worse satisfaction to higher inpatient mortality rates. The current study evaluates the association between length of ED boarding and outcomes. The authors expected that prolonged ED boarding of admitted patients would be associated with higher mortality rates and longer hospital lengths of stay (LOS). This was a retrospective cohort study set at a suburban academic ED with an annual ED census of 90,000 visits. Consecutive patients admitted to the hospital from the ED and discharged between October 2005 and September 2008 were included. An electronic medical record (EMR) system was used to extract patient demographics, ED disposition (discharge, admit to floor), ED and hospital LOS, and in-hospital mortality. Boarding was defined as ED LOS 2 hours or more after decision for admission. Descriptive statistics were used to evaluate the association between length of ED boarding and hospital LOS, subsequent transfer to an intensive care unit (ICU), and mortality controlling for comorbidities. There were 41,256 admissions from the ED. Mortality generally increased with increasing boarding time, from 2.5% in patients boarded less than 2 hours to 4.5% in patients boarding 12 hours or more (p boarding time (p boarded for more than 24 hours. The increases were still apparent after adjustment for comorbid conditions and other factors. Hospital mortality and hospital LOS are associated with length of ED boarding. © 2011 by the Society for Academic Emergency Medicine.

  13. Joint Advisory Appeals Board

    CERN Multimedia

    2013-01-01

    The Joint Advisory Appeals Board has examined the internal appeal lodged by a former member of the personnel, a beneficiary of the CERN Pension Fund, against the calculation of his pension in the framework of the Progressive Retirement Programme.   The person concerned has not objected to the report of the Board and the final decision of the Director-General being brought to the attention of the members of the personnel. In application of Article R VI 1.18 of the Staff Regulations, these documents will therefore be available from 26 July to 11 August 2013 at the following link. HR Department Head Office

  14. Does Board Diversity Really Matter?

    DEFF Research Database (Denmark)

    Rose, Caspar; Munch-Madsen, Peter; Funch, Maja

    2013-01-01

    We study the impact of female board representation as well as citizenship on corporate performance based on a sample of the largest listed firms in the Nordic countries as well as Germany. We also seek to determine the variation of board structures using factor analysis. We find no support for any...... performance impact relating to female board representation. However, we find an impact of board citizenship on performance showing that board members with a background from common law have a significant positive influence on corporate performance measured as ROA, ROE and ROCE. Consistent with other studies we...... also document that large boards impact corporate performance negatively. Moreover we also show that data set on boards can be explained by four underlying factors. This article adds insight to board determinants of corporate performance as well as the classification of board variation. Specifically...

  15. Phase Change Permeation Technology for Environmental Control & Life Support Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is evaluating Dutyion™, a phase change permeation membrane technology developed by Design Technology and Irrigation (DTI), for use in future advanced life...

  16. Supporting Organizational Change in Command and Control: Approaches and Metrics

    National Research Council Canada - National Science Library

    Weil, Shawn A; Levchuk, Georgiy; Downes-Martin, Stephen; Diedrich, Frederick J; Entin, Elliot E; See, Katrina E; Serfaty, Daniel

    2005-01-01

    .... However, for these technologies to be maximally effective, C2 organizations need to have the flexibility to tailor their organizational structures in response to changing mission In the experiment...

  17. Visualization of the structural changes in plywood and gypsum board during the growth of Chaetomium globosum and Stachybotrys chartarum

    DEFF Research Database (Denmark)

    Lewinska, Anna Malgorzata; Hoof, Jakob Blæsbjerg; Peuhkuri, Ruut H.

    2016-01-01

    of building materials such as plywood and gypsum wallboard. This study focuses on using micro-computed tomography (microCT) to investigate changes of the structure of plywood and gypsum wallboard during fungal degradation by S. chartarum and C. globosum. Changes in the materials as a result of dampness...... and fungal growth were determined by measuring porosity and pore shape via microCT. The results show that the composition of the building material influenced the level of penetration by fungi as shown by scanning electron microscopy (SEM). Plywood appeared to be the most affected, with the penetration...

  18. 27 CFR 1.27 - Change in ownership, management, or control of the applicant.

    Science.gov (United States)

    2010-04-01

    ... BOTTLING OF DISTILLED SPIRITS Basic Permits Applications for Permits § 1.27 Change in ownership, management, or control of the applicant. In the event of any change in the ownership, management, or control of... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Change in ownership...

  19. Magnetic field on board

    International Nuclear Information System (INIS)

    Estevez Radio, H.; Fernandez Arenal, C.A.

    1995-01-01

    Here, the calculation of the magnetic field on board ships is performed, using matrix calculus, in a similar way as when the magnetic field in matter is studied. Thus the final formulas are written in a more compact form and they are obtained through a simpler way, more suitable for the university education. (Author)

  20. Board affiliation and pay gap

    Directory of Open Access Journals (Sweden)

    Shenglan Chen

    2014-06-01

    Full Text Available This paper examines the effects of board affiliation on the corporate pay gap. Using a sample of Chinese listed firms from 2005 to 2011, we find that boards with a greater presence of directors appointed by block shareholders have lower pay gaps. Furthermore, the governance effects of board affiliation with and without pay are distinguished. The empirical results show that board affiliation without pay is negatively related to the pay gap, while board affiliation with pay is positively related to the pay gap. Overall, the results shed light on how block shareholders affect their companies’ pay gaps through board affiliation.

  1. Case control study of Electrocardiographic changes in pregnant women

    Directory of Open Access Journals (Sweden)

    Sharddha Singh

    1995-09-01

    Full Text Available Pregnancy causes significant haemodynamic changes and imposes stress on the cardiovascular system. Many healthy women develop signs and symptoms of cardiovascular overload during pregnancy. Knowledge of established normal changes in EKG during normal pregnancy is important. The aim of our study was to detect any early damage to myocardium during pregnancy with the help of electrocardiography. Total of 20 pregnant and 20 non pregnant women were studied. The most significant change observed in ECG was T wave inversion with odds ratio 7.43 (95%. Cl = 1.49 to 41.00. P= 0.005. Stratified analysis showed that there was no confounding role of age in the relationship of T wave inversion and ECG findings. Moreover, a significant relationship between anaemia and T wave inversion was also observed. (0=1.74 ■ 1101.06; P= 0.007.

  2. Phase change material for temperature control and material storage

    Science.gov (United States)

    Wessling, Jr., Francis C. (Inventor); Blackwood, James M. (Inventor)

    2011-01-01

    A phase change material comprising a mixture of water and deuterium oxide is described, wherein the mole fraction of deuterium oxide is selected so that the mixture has a selected phase change temperature within a range between 0.degree. C. and 4.degree. C. The mixture is placed in a container and used for passive storage and transport of biomaterials and other temperature sensitive materials. Gels, nucleating agents, freezing point depression materials and colorants may be added to enhance the characteristics of the mixture.

  3. Stittco Utilities Man Ltd. application for an interim ex parte order under section 45 of the Public Utilities Board Act for the approval of a change to its schedule of rates

    Energy Technology Data Exchange (ETDEWEB)

    1990-11-15

    Stittco Utilities, a company distributing propane in Manitoba, applied to the Manitoba Public Utilities Board for an interim order authorizing an increase in rates for all domestic and commercial customers in 3 Manitoba localities. The rate increase requested is based on the increase in the commodity price of propane and related changes in freight rates. If approved, the average rate will increase by ca 28% for residential customers and 27% for commercial customers. With the expectation that the price of propane would decrease in the near future, Stittco proposed to base its rates on a propane price lower than the current market price, in an effort to retain existing customers. Stittco also proposed to establish a variance account, in which the difference between the cost of propane built into the rates and the actual market price would be accumulated. From time to time Stittco would apply to adjust the rate schedule to refund overages or collect shortfalls contained in this variance account. It is Stittco's intention to cancel its new propane supply contract when propane prices stabilize and enter into a new fixed-price contract. Stittco would then apply for a new rate schedule based on the long-term price of propane. Based on the evidence, the Board decided that a prima facie case has been made showing a 105% increase in Stittco's cost of product and delivery, and that this increase should be passed through to Stittco customers effective November 16, 1990. Status reports were required for the variance account starting December 1990.

  4. Glacial greenhouse-gas fluctuations controlled by ocean circulation changes.

    Science.gov (United States)

    Schmittner, Andreas; Galbraith, Eric D

    2008-11-20

    Earth's climate and the concentrations of the atmospheric greenhouse gases carbon dioxide (CO(2)) and nitrous oxide (N(2)O) varied strongly on millennial timescales during past glacial periods. Large and rapid warming events in Greenland and the North Atlantic were followed by more gradual cooling, and are highly correlated with fluctuations of N(2)O as recorded in ice cores. Antarctic temperature variations, on the other hand, were smaller and more gradual, showed warming during the Greenland cold phase and cooling while the North Atlantic was warm, and were highly correlated with fluctuations in CO(2). Abrupt changes in the Atlantic meridional overturning circulation (AMOC) have often been invoked to explain the physical characteristics of these Dansgaard-Oeschger climate oscillations, but the mechanisms for the greenhouse-gas variations and their linkage to the AMOC have remained unclear. Here we present simulations with a coupled model of glacial climate and biogeochemical cycles, forced only with changes in the AMOC. The model simultaneously reproduces characteristic features of the Dansgaard-Oeschger temperature, as well as CO(2) and N(2)O fluctuations. Despite significant changes in the land carbon inventory, CO(2) variations on millennial timescales are dominated by slow changes in the deep ocean inventory of biologically sequestered carbon and are correlated with Antarctic temperature and Southern Ocean stratification. In contrast, N(2)O co-varies more rapidly with Greenland temperatures owing to fast adjustments of the thermocline oxygen budget. These results suggest that ocean circulation changes were the primary mechanism that drove glacial CO(2) and N(2)O fluctuations on millennial timescales.

  5. 27 CFR 40.104 - Change in control of a corporation.

    Science.gov (United States)

    2010-04-01

    ..., results in a change in the identity of the principal stockholders exercising actual or legal control of the operations of the corporation, the corporate manufacturer shall, within 30 days after the change...

  6. Control surface wettability with nanoparticles from phase-change materials

    NARCIS (Netherlands)

    Ten Brink, G. H.; van het Hof, P. J.; Chen, B.; Sedighi, M.; Kooi, B. J.; Palasantzas, G.

    2016-01-01

    The wetting state of surfaces can be controlled physically from the highly hydrophobic to hydrophilic states using the amorphous-to-crystalline phase transition of Ge2Sb2Te5 (GST) nanoparticles as surfactant. Indeed, contact angle measurements show that by increasing the surface coverage of the

  7. Natural variations and controlled changes in lignification process

    Energy Technology Data Exchange (ETDEWEB)

    Grand, C.; Boudet, A.M.; Ranjeva, R.

    1982-10-01

    Plant materials exhibit a great heterogeneity as far as the concentration and composition of lignins are concerned. Different examples of their natural variation, including taxonomic differences, developmental changes, mutations and responses to pathogen attack are presented. This variability suggests that lignin content and composition can be manipulated in plants, to a certain extent, by different treatments. Several possibilities are described to increase lignin concentrations. They mainly include hormonal or precursor treatments. Moreover light greatly affects the quantity and quality of lignins and such changes in environmental conditions can be used to produce specific radio-labelled lignins in view of biodegradation studies. Finally, induced mutants with modified lignins are described and attempts in inhibiting lignification through specific enzyme inhibitors are discussed. These data suggest that there is a good possibility of obtaining plants with modified lignins either genetically or by chemical inhibition. These strategies should be developed in the future in order to optimize plant biomass utilisation. (Refs. 44).

  8. Psychiatric boarding incidence, duration, and associated factors in United States emergency departments.

    Science.gov (United States)

    Nolan, Jason M; Fee, Christopher; Cooper, Bruce A; Rankin, Sally H; Blegen, Mary A

    2015-01-01

    Boarding, especially among psychiatric patients, has been characterized as a significant cause of ED crowding, but no quantitative analysis has described boarding nationally. This study determines the incidence, duration, and factors associated with ED boarding in the United States. 2008 National Hospital Ambulatory Medical Care Survey ED data were stratified by visit type (psychiatric vs. non-psychiatric), boarding status, and patient and hospital characteristics. Boarding was defined as a visit with an ED length of stay >6 hours, and boarding time as ED length of stay minus 6 hours. Pearson's chi-square tests describe hospital and patient characteristics stratified by boarding status. Multilevel multivariable logistic and linear regressions determine associations with boarding and boarding time. While 11% of all ED patients boarded, 21.5% of all psychiatric ED patients boarded. Boarding was also more prolonged for psychiatric ED patients. Controlling for confounders, odds of boarding for psychiatric patients were 4.78 (2.63-8.66) times higher than non-psychiatric, and psychiatric patients boarded 2.78 (1.91-3.64) hours longer than non-psychiatric. US EDs experienced high proportions and durations of boarding with psychiatric patients disproportionately affected. Additional research concerning mental health care services and legislation may be required to address ED psychiatric patient boarding. Copyright © 2015 Emergency Nurses Association. Published by Elsevier Inc. All rights reserved.

  9. Board diversity in family firms

    OpenAIRE

    Menozzi, Anna; Fraquelli, Giovanni; Novara, Jolanda de

    2015-01-01

    The paper deals with diversity as a key factor to improve the board of directors’ decision process in family firms. The empirical literature about board diversity points at the positive impact of diversity on board functioning and firm performance. The paper uses a statistical diversity index to capture the heterogeneity of board of directors and put it in relation with firm performance, as measured by firm profitability. The empirical analysis is based on a newly collected panel of 327 famil...

  10. 77 FR 20790 - Manufacturing Extension Partnership Advisory Board

    Science.gov (United States)

    2012-04-06

    ...: This meeting is being held in conjunction with MEP's Manufacturing Innovations 2012 Conference in... Board members, (2) a national manufacturing strategy, and (3) an update on MEP's workforce initiatives. The agenda may change to accommodate other Board business. Admission Instructions: Anyone wishing to...

  11. Reliability analysis of microcomputer boards and computer based systems important to safety of nuclear plants

    International Nuclear Information System (INIS)

    Shrikhande, S.V.; Patil, V.K.; Ganesh, G.; Biswas, B.; Patil, R.K.

    2010-01-01

    Computer Based Systems (CBS) are employed in Indian nuclear plants for protection, control and monitoring purpose. For forthcoming CBS, Reactor Control Division has designed and developed a new standardized family of microcomputer boards qualified to stringent requirements of nuclear industry. These boards form the basic building blocks of CBS. Reliability analysis of these boards is being carried out using analysis package based on MIL-STD-217Plus methodology. The estimated failure rate values of these standardized microcomputer boards will be useful for reliability assessment of these systems. The paper presents reliability analysis of microcomputer boards and case study of a CBS system built using these boards. (author)

  12. TOR and paradigm change: cell growth is controlled.

    Science.gov (United States)

    Hall, Michael N

    2016-09-15

    This year marks the 25th anniversary of the discovery of target of rapamycin (TOR), a highly conserved kinase and central controller of cell growth. In this Retrospective, I briefly describe the discovery of TOR and the subsequent elucidation of its cellular role. I place particular emphasis on an article by Barbet et al. from 1996, the first suggesting that TOR controls cell growth in response to nutrients. © 2016 Hall. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  13. On the Internationalization of Corporate Boards

    DEFF Research Database (Denmark)

    Oxelheim, Lars; Gregoric, Aleksandra; Randøy, Trond

    2013-01-01

    This study investigates the internationalization of corporate boards, using a sample of 346 non-financial listed Nordic firms during 2001-2008. Given a high level of international activity, these firms have surprisingly few foreign directors. The picture of international expertise changes...... considerably, however, if we also count the international experience of national directors. The percentage of foreign directors is related primarily to financial internationalization rather than foreign sales, and thus presumably to the monitoring rather than advisory functions. The international experience...... of the nationals covaries with foreign sales, and increases with the share of foreign directors. Thus both sources of international expertise should be considered when analyzing board internationalization....

  14. 77 FR 3843 - Agency Information Collection (Board of Veterans' Appeals Customer Satisfaction With Hearing...

    Science.gov (United States)

    2012-01-25

    ... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0548] Agency Information Collection (Board of Veterans' Appeals Customer Satisfaction With Hearing Survey) Under OMB Review AGENCY: Board of Veterans.... Title: Board of Veterans' Appeals Customer Satisfaction with Hearing Survey, VA Form 0745. OMB Control...

  15. Why Not Charter School Boards?

    Science.gov (United States)

    Schlechty, Phillip C.; Cole, Robert W.

    1993-01-01

    Claiming that individual school board members act in selfish ways, proposes electing entire school board as a slate. Board would collectively be held responsible for performance of the school system and all of its employees. State legislation would be required to specify how interested groups would select a slate and create a charter, which is the…

  16. Board of Governors | IDRC - International Development Research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... internal control and management information systems are viable; Track corporate performance against strategic and business plans; Monitor the performance of the president and chief executive officer; Ensure IDRC has an effective communications strategy; Assess our own performance in fulfilling Board responsibilities ...

  17. 75 FR 42448 - Board of Scientific Counselors, Coordinating Office for Terrorism Preparedness and Emergency...

    Science.gov (United States)

    2010-07-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, Coordinating Office for Terrorism Preparedness and Emergency Response; Notice of..., 1972, that the Board of Scientific Counselors, Coordinating Office for Terrorism Preparedness and...

  18. Installation and testing of the 112 boards for the front-end electronics.

    CERN Multimedia

    2006-01-01

    Installation and testing of the 112 boards for the front-end electronics. 28 boards are interconnected to a TPC type Readout Controller Unit trought the horizontal bus strips. The blue tubes are for the circulating cooling water.

  19. Control of group velocity by phase-changing collisions

    International Nuclear Information System (INIS)

    Goren, C.; Rosenbluh, M.; Wilson-Gordon, A.D.; Friedmann, H.

    2005-01-01

    We discuss the influence of phase-changing collisions on the group velocities in Doppler-broadened, cycling, degenerate two-level systems where F e =F g +1 and F g >0, interacting with pump and probe lasers, that exhibit electromagnetically induced absorption (EIA). Two model systems are considered: the N system where the pump and probe are polarized perpendicularly, and EIA is due to transfer of coherence (TOC), and the double two-level system (TLS) where both lasers have the same polarization, and EIA is due to transfer of population (TOP). For the case of Doppler-broadened EIA TOC, which occurs at low pump intensity, there is a switch from positive to negative dispersion and group velocity, as the rate of phase-changing collisions is increased. For the case of EIA TOP at low pump intensity, the dispersion and group velocity remain negative even when the collision rate is increased. Pressure-induced narrowing, accompanied by an increase in the magnitude of the negative dispersion and a decrease in the magnitude of the negative group velocity, occurs in both EIA TOC and EIA TOP, at low pump intensity. When the pump intensity is increased, a switch from negative to positive dispersion and group velocity, with increasing collision rate, also occurs in the double TLS system. However, the effect is far smaller than in the case of the N system at low pump intensity

  20. Pension Fund Governing Board

    CERN Multimedia

    HR Department

    2008-01-01

    Note The CERN pension scheme is based on the principle of defined benefits, so beneficiaries continue to receive the benefits to which they are entitled in accordance with the Rules of the Pension Fund. This means that pension entitlements under the Rules are not directly affected by the financial crisis and the current economic situation. However, the adjustment of pensions to the cost of living is not automatic and, under the method applied since 2006, must take into account the Fund’s financial position. Meeting of the Pension Fund Governing Board The Pension Fund Governing Board held its eighth meeting at ESO in Garching (near Munich), Germany on 24 October 2008. Before starting its work, the Governing Board had the privilege of hearing an opening address by Professor Tim de Zeeuw, the Director General of ESO. Professor de Zeeuw described the mission of ESO and the ambitious projects of his organisation, which performs astronomy observations using telescopes located in Chile. The Director-General receiv...

  1. Electricity market readiness plan : Ontario Energy Board

    International Nuclear Information System (INIS)

    2001-03-01

    This document informs electric power market participants of the Ontario Energy Board's newly developed market readiness plan and target timelines that local distribution companies (LDCs) must meet for retail marketing. The Ontario Energy Board's plan incorporates relevant independent market operator (IMO)-administered market milestones with retail market readiness targeted for September 2001. The market readiness framework involves a self-certification process for LDCs by August 10, 2001, through which the Board will be able to monitor progress and assess the feasibility of meeting the target timelines. For retail market readiness, all LDCs will have to calculate settlement costs, produce unbundled bills, provide standard supply service, change suppliers and accommodate retail transactions. LDCs must be either authorized participants in the IMO-administered market or become retail customers of their host LDC. Unbundled bills will include itemized charges for energy price, transmission, distribution and debt retirement charge. 1 tab., 1 fig

  2. Structural Changes of PVDF Membranes by Phase Separation Control

    International Nuclear Information System (INIS)

    Lee, Semin; Kim, Sung Soo

    2016-01-01

    Thermally induced phase separation (TIPS) and nonsolvent induced phase separation (NIPS) were simultaneously induced for the preparation of flat PVDF membranes. N-methyl-2-pyrrolidone (NMP) was used as a solvent and dibutyl-phthlate (DBP) was used as a diluent for PVDF. When PVDF was melt blended with NMP and DBP, crystallization temperature was lowered for TIPS and unstable region was expanded for NIPS. Ratio of solvent to diluent changed the phase separation mechanism to obtain the various membrane structures. Contact mode of dope solution with nonsolvent determined the dominant phase separation behavior. Since heat transfer rate was greater than mass transfer rate, surface structure was formed by NIPS and inner structure was by TIPS. Quenching temperature of dope solution also affected the phase separation mechanism and phase separation rate to result in the variation of structure

  3. TRMM On-Orbit Performance Reassessed After Control Change

    Science.gov (United States)

    Bilanow, Stephen

    2006-01-01

    The Tropical Rainfall Measuring Mission (TRMM) spacecraft, a joint mission between the U.S. and Japan, launched onboard an H-I1 rocket on November 27, 1997, and transitioned in August, 2001, from an average operating altitude of 350 kilometers to 402.5 kilometers. Due to problems using the Earth Sensor Assembly (ESA) at the higher altitude, TRMM switched to a backup attitude control mode. Prior to the orbit boost TRMM controlled pitch and roll to the local vertical using ESA measurements while using gyro data to propagate yaw attitude between yaw updates from the Sun sensors. After the orbit boost, a Kalman filter used 3-axis gyro data with Sun sensor and magnetometers to estimate onboard attitude. While originally intended to meet a degraded attitude accuracy of 0.7 degrees, the new control mode met the original 0.2 degree attitude accuracy requirement after improving onboard ephemeris prediction and adjusting the magnetometer calibration onboard. Independent roll attitude checks using a science instrument, the Precipitation Radar (PR) which was built in Japan, provided a novel insight into the pointing performance. The PR data helped identify the pointing errors after the orbit boost, track the performance improvements, and show subtle effects from ephemeris errors and gyro bias errors. It also helped identify average bias trends throughout the mission. Roll errors tracked by the PR from sample orbits pre-boost and post-boost are shown in Figure 1. Prior to the orbit boost, the largest attitude errors were due to occasional interference in the ESA. These errors were sometime larger than 0.2 degrees in pitch and roll, but usually less, as estimated from a comprehensive review of the attitude excursions using gyro data. Sudden jumps in the onboard roll show up as spikes in the reported attitude since the control responds within tens of seconds to null the pointing error. The PR estimated roll tracks well with an estimate of the roll history propagated using gyro

  4. 12 CFR 250.180 - Reports of changes in control of management.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Reports of changes in control of management... FEDERAL RESERVE SYSTEM MISCELLANEOUS INTERPRETATIONS Interpretations § 250.180 Reports of changes in control of management. (a) Under a statute enacted September 12, 1964 (Pub. L. 88-593; 78 Stat. 940) all...

  5. Patients overwhelmingly prefer inpatient boarding to emergency department boarding.

    Science.gov (United States)

    Viccellio, Peter; Zito, Joseph A; Sayage, Valerie; Chohan, Jasmine; Garra, Gregory; Santora, Carolyn; Singer, Adam J

    2013-12-01

    Boarding of admitted patients in the emergency department (ED) is a major cause of crowding. One alternative to boarding in the ED, a full-capacity protocol where boarded patients are redeployed to inpatient units, can reduce crowding and improve overall flow. Our aim was to compare patient satisfaction with boarding in the ED vs. inpatient hallways. We performed a structured telephone survey regarding patient experiences and preferences for boarding among admitted ED patients who experienced boarding in the ED hallway and then were subsequently transferred to inpatient hallways. Demographic and clinical characteristics, as well as patient preferences, including items related to patient comfort and safety using a 5-point scale, were recorded and descriptive statistics were used to summarize the data. Of 110 patients contacted, 105 consented to participate. Mean age was 57 ± 16 years and 52% were female. All patients were initially boarded in the ED in a hallway before their transfer to an inpatient hallway bed. The overall preferred location after admission was the inpatient hallway in 85% (95% confidence interval 75-90) of respondents. In comparing ED vs. inpatient hallway boarding, the following percentages of respondents preferred inpatient boarding with regard to the following 8 items: rest, 85%; safety, 83%; confidentiality, 82%; treatment, 78%; comfort, 79%; quiet, 84%; staff availability, 84%; and privacy, 84%. For no item was there a preference for boarding in the ED. Patients overwhelmingly preferred the inpatient hallway rather than the ED hallway when admitted to the hospital. Copyright © 2013 Elsevier Inc. All rights reserved.

  6. Input-driven versus turnover-driven controls of simulated changes in soil carbon due to land-use change

    Science.gov (United States)

    Nyawira, S. S.; Nabel, J. E. M. S.; Brovkin, V.; Pongratz, J.

    2017-08-01

    Historical changes in soil carbon associated with land-use change (LUC) result mainly from the changes in the quantity of litter inputs to the soil and the turnover of carbon in soils. We use a factor separation technique to assess how the input-driven and turnover-driven controls, as well as their synergies, have contributed to historical changes in soil carbon associated with LUC. We apply this approach to equilibrium simulations of present-day and pre-industrial land use performed using the dynamic global vegetation model JSBACH. Our results show that both the input-driven and turnover-driven changes generally contribute to a gain in soil carbon in afforested regions and a loss in deforested regions. However, in regions where grasslands have been converted to croplands, we find an input-driven loss that is partly offset by a turnover-driven gain, which stems from a decrease in the fire-related carbon losses. Omitting land management through crop and wood harvest substantially reduces the global losses through the input-driven changes. Our study thus suggests that the dominating control of soil carbon losses is via the input-driven changes, which are more directly accessible to human management than the turnover-driven ones.

  7. How does a change in the control room design affect diagnostic strategies in nuclear power plants?

    International Nuclear Information System (INIS)

    Kim, Dong Young; Kim, Jonghyun

    2014-01-01

    Recently, main control rooms have been considerably changed by modern computer techniques. Some of the features that distinguish digital control rooms from conventional, analog rooms in nuclear power plants include advanced alarm systems, graphic information display systems, computerized procedure systems, and soft control. These features can bring changes in operator tasks, changing the characteristics of tasks or creating new tasks for operators. It is especially expected that these features may bring out changes in the operator's diagnostic tasks and strategies in a digital control room as compared with an analog control room. This study investigates the differences in the operator's diagnostic tasks and strategies in analog and digital control rooms. This study also attempts to evaluate how new systems in a digital control room affect diagnostic strategies. Three different approaches, which are complementary, are used to identify diagnostic strategies in the digital control room and in the analog control room: (1) observation in the simulator, (2) interview with operators, and (3) a literature review. The results show that the digital control room introduces new diagnosis strategies compared with the analog control room while also changing the characteristics of the strategies, mostly by gaining more support from the computerized system. (author)

  8. Digitally Controlled Converter with Dynamic Change of Control Law and Power Throughput

    DEFF Research Database (Denmark)

    Nesgaard, Carsten; Andersen, Michael Andreas E.; Nielsen, Nils

    2003-01-01

    the substitution of analog controllers with their digital counterparts are considered. The outline of the paper is divided into two segments – the first being an experimental analysis of the timing behavior by means of code optimization – the second being an examination of the dynamics of incorporating two control......With the continuous development of faster and cheaper microprocessors the field of applications for digital control is constantly expanding. Based on this trend the paper at hand describes the analysis and implementation of multiple control laws within the same controller. Also, implemented within...

  9. 49 CFR 1011.2 - The Board.

    Science.gov (United States)

    2010-10-01

    ... TRANSPORTATION GENERAL RULES AND REGULATIONS BOARD ORGANIZATION; DELEGATIONS OF AUTHORITY § 1011.2 The Board. (a... submitted for decision except those assigned to an individual Board Member or employee or an employee board...) The Board may bring before it any matter assigned to an individual Board Member or employee or...

  10. Federal Board of Health - annual report 1981

    International Nuclear Information System (INIS)

    1981-01-01

    The emphases of the work of the Federal Board of Health is on drug control, consumer protection with regard to health, environmental hygiene, radiation hygiene, preventation and intervention as well as on special subjects, as for instance the control of animal experiments and the supervision of biological safety of genetic engineering. In addition, central services, systems of information and documentation, publications and courses for professional and advanced training are offered. (DG) [de

  11. RTE - Business and sustainable development report 2015. Management report consolidated financial statements 2015. Report by the chairman of the supervisory board 2015

    International Nuclear Information System (INIS)

    2016-01-01

    After an introduction by the RTE's CEO, brief presentations of governance bodies (management board, executive committee, supervisory board), and a presentation of some statistics illustrating RTE activities and efficiency, the activity report addresses and illustrates some specific issues: moving for local to European scale by promoting electrical solidarity among the regions, climate solutions in support of sustainable, economical and efficient power system, experts solutions for tomorrow's electricity. The management report contains financial and legal information (significant events of 2015, economic environment, business and results, financing, financial structure, outlook for 2016, risk analysis), company information (employment, work organisation, labour relations, health and safety, training, diversity and equal opportunities, compliance with International Labour Organisation conventions), environmental information (general environmental policy, pollution and waste management, sustainable use of resources, climate change, protection and development of biodiversity), and societal information (local, economic and social impact of RTE's business, relations with people and organisations concerned by RTE's business, out-sourcing and suppliers, fair practices, other action to promote human rights). The third report presents the governance organisation of RTE (supervisory board, executive board, principles of remuneration of supervisory board and executive board members, general meetings, information publication). It describes the internal control at RTE (organisation, actors), presents the policy of risk management and control, activities of audit and control within RTE. It finally presents external controls made by different public bodies

  12. Low-level software for the pentek 6510 digital receiver board applied to the new AD beam measurement system

    CERN Document Server

    Angoletta, Maria Elena

    2002-01-01

    The new beam measurement system for the CERN Antiproton Decelerator heavily relies on a Pentek 6510 Digital Receiver (DRX) board. The new system goal is to extract beam parameters from pickup signals. Its digital implementation allows for higher precision, easier management of the hardware as well as modification and improvement with no hardware change. In this scheme, this innovative VME DRX board is responsible for parallel data acquisition, independent digital down conversion and processing of up to 4 digitised inputs. The in-house- developed low-level code (LLC), running on the board, takes care of several tasks, such as interfacing with the Real Time Task (RTT), data processing and board managing. The RTT runs on a PowerPC VME board and controls the DRX board as a master. The LLC is a state machine developed in C and Assembler, which services several interrupts and performs the FFT of complex input data. The DRX low-level system developed is highly modular and easily adaptable to other processing scenari...

  13. GUI Application for ATCA-based LLRF Carrier Board Management

    CERN Document Server

    Wychowaniak, Jan; Predki, Pawel; Napieralski, Andrzej

    2011-01-01

    The Advanced Telecommunications Computing Architecture (ATCA) standard describes an efficient and powerful platform, implementation of which was adopted to be used as a base for control systems in high energy physics. The ATCA platform is considered to be applied for the X-ray Free Electron Laser (X-FEL), being built at Deutsches Electronen- Synchrotron (DESY) in Hamburg, Germany. The Low Level Radio Frequency (LLRF) control system is composed of a few ATCA Carrier Boards. Carrier Board hosts Intelligent Platform Management Controller (IPMC), which is developed in compliance with the PICMG specifications. IPMC is responsible for management and monitoring of sub-modules installed on Carrier Boards and pluggable Advanced Mezzanine Card (AMC) modules. The ATCA Shelf Manager is the main control unit of a single ATCA crate, responsible for all power and fan modules and Carrier Boards installed in ATCA shelf. The device provides a system administrator with a set of control and diagnostic capabilities regarding the ...

  14. Board of director characteristics and audit report lag: Australian evidence

    Directory of Open Access Journals (Sweden)

    Harjinder Singh

    2011-11-01

    Full Text Available This study examines whether board of director’s independence, financial expertise, gender, corporate governance experience and diligence impact the audit report lag exhibited by Australian publicly listed firms. Using a pooled sample of 500 firm-year observations obtained from the Australian Securities Exchange for the period 2004 to 2008, this study finds evidence that board member independence, board member financial expertise and, to a lesser extent, board member corporate governance experience are the most significant predictors associated with shorter/reduced audit report lag. Main findings are robust to alternative measures of audit report lag, board characteristics and control variables. Findings from this study clearly imply that boards play a substantial role in reducing audit report lag. Results imply that legislative and regulatory requirements, both in Australian and overseas, stipulating board member independence and financial expertise requirements are effective in improving the integrity of financial reporting, a key component of which is timeliness of financial reporting (encapsulated by audit report lag. In addition, an additional board characteristic that regulators should consider promoting among firms is board member corporate governance experience. Results from this study, therefore, have clear implications not only for regulators but also for key stakeholders such shareholders and management.

  15. What makes great boards great.

    Science.gov (United States)

    Sonnenfeld, Jeffrey A

    2002-09-01

    In the wake of meltdowns at WorldCom, Tyco, and Enron, enormous attention has been focused on the companies' boards. It seems inconceivable that business disasters of such magnitude could happen without gross or even criminal negligence on the part of board members. And yet a close examination of those boards reveals no broad pattern of incompetence or corruption. In fact, they followed most of the accepted standards for board operations: Members showed up for meetings; they had money invested in the company; audit committees, compensation committees, and codes of ethics were in place; the boards weren't too small or too big, nor were they dominated by insiders. In other words, they passed the tests that would normally be applied to determine whether a board of directors was likely to do a good job. And that's precisely what's so scary, according to corporate governance expert Jeffrey Sonnenfeld, who suggests that it's time for some new thinking about how corporate boards operate and are evaluated. He proposes thinking not only about how to structure the board's work but also about how to manage it as a social system. Good boards are, very simply, high-functioning work groups. They're distinguished by a climate of respect, trust, and candor among board members and between the board and management. Information is shared openly and on time; emergent political factions are quickly eliminated. Members feel free to challenge one another's assumptions and conclusions, and management encourages lively discussion of strategic issues. Directors feel a responsibility to contribute meaningfully to the board's performance. In addition, good boards assess their own performance, both collectively and individually.

  16. Physico-mechanical comparison of urea formaldehyde bonded particle board manufactured from jute sticks and wood of Trewia nudiflora

    Directory of Open Access Journals (Sweden)

    Abu Saleh Md. Golam Kibria

    2012-12-01

    Full Text Available This study is to know the physical and mechanical properties of particle board made up of jute sticks (jutex board and wood chips (woodex board of Trewia nudiflora. Two leading particle board manufacturing industries of Bangladesh were selected first which have the same manufacturing process and adhesive composition. Boards of available thicknesses were collected randomly. From each thickness category, three replications were taken. The parameters were studied as adhesive composition,mass of a board, density, bending strength, modulus of elasticity,surface soundness, tensile strength, screw withdrawal, pressure and pressing time. Urea formaldehyde resin is used to manufacture both types of particle board. For achieving the greater efficiency of boards, some chemical compounds were mixed with the resin. Due to the change in thicknesses, boards were not always different in terms of the physical and mechanical properties. Moreover, except the modulus of elasticity (MOE, woodex boards were superior to the properties of jutex boards

  17. Comparison of a laboratory grade force platform with a Nintendo Wii Balance Board on measurement of postural control in single-leg stance balance tasks.

    Science.gov (United States)

    Huurnink, Arnold; Fransz, Duncan P; Kingma, Idsart; van Dieën, Jaap H

    2013-04-26

    Training and testing of balance have potential applications in sports and medicine. Laboratory grade force plates (FP) are considered the gold standard for the measurement of balance performance. Measurements in these systems are based on the parameterization of center of pressure (CoP) trajectories. Previous research validated the inexpensive, widely available and portable Nintendo Wii Balance Board (WBB). The novelty of the present study is that FP and WBB are compared on CoP data that was collected simultaneously, by placing the WBB on the FP. Fourteen healthy participants performed ten sequences of single-leg stance tasks with eyes open (EO), eyes closed (EC) and after a sideways hop (HOP). Within trial comparison of the two systems showed small root-mean-square differences for the CoP trajectories in the x and y direction during the three tasks (mean±SD; EO: 0.33±0.10 and 0.31±0.16 mm; EC: 0.58±0.17 and 0.63±0.19 mm; HOP: 0.74±0.34 and 0.74±0.27 mm, respectively). Additionally, during all 420 trials, comparison of FP and WBB revealed very high Pearson's correlation coefficients (r) of the CoP trajectories (x: 0.999±0.002; y: 0.998±0.003). A general overestimation was found on the WBB compared to the FP for 'CoP path velocity' (EO: 5.3±1.9%; EC: 4.0±1.4%; HOP: 4.6±1.6%) and 'mean absolute CoP sway' (EO: 3.5±0.7%; EC: 3.7±0.5%; HOP: 3.6±1.0%). This overestimation was highly consistent over the 140 trials per task (r>0.996). The present findings demonstrate that WBB is sufficiently accurate in quantifying CoP trajectory, and overall amplitude and velocity during single-leg stance balance tasks. Copyright © 2013 Elsevier Ltd. All rights reserved.

  18. YF22 Model With On-Board On-Line Learning Microprocessors-Based Neural Algorithms for Autopilot and Fault-Tolerant Flight Control Systems

    National Research Council Canada - National Science Library

    Napolitano, Marcello

    2002-01-01

    This project focused on investigating the potential of on-line learning 'hardware-based' neural approximators and controllers to provide fault tolerance capabilities following sensor and actuator failures...

  19. 77 FR 38583 - Meeting of the United States Travel and Tourism Advisory Board

    Science.gov (United States)

    2012-06-28

    ... Tourism Advisory Board AGENCY: International Trade Administration, U.S. Department of Commerce. ACTION... the United States Travel and Tourism Advisory Board (Board). The agenda may change to [email protected] trade.gov . FOR FURTHER INFORMATION CONTACT: Jennifer Pilat, the United States Travel and Tourism...

  20. Water Capture Device Signal Integration Board

    Science.gov (United States)

    Chamberlin, Kathryn J.; Hartnett, Andrew J.

    2018-01-01

    I am a junior in electrical engineering at Arizona State University, and this is my second internship at Johnson Space Center. I am an intern in the Command and Data Handling Branch of Avionics Division (EV2), my previous internship was also in EV2. During my previous internship I was assigned to the Water Capture Device payload, where I designed a prototype circuit board for the electronics system of the payload. For this internship, I have come back to the Water Capture Device project to further the work on the electronics design I completed previously. The Water Capture Device is an experimental payload to test the functionality of two different phase separators aboard the International Space Station (ISS). A phase separator sits downstream of a condensing heat exchanger (CHX) and separates the water from the air particles for environmental control on the ISS. With changing CHX technology, new phase separators are required. The goal of the project is to develop a test bed for the two phase separators to determine the best solution.

  1. An Integrated Architecture for On-Board Aircraft Engine Performance Trend Monitoring and Gas Path Fault Diagnostics

    Science.gov (United States)

    Simon, Donald L.

    2010-01-01

    Aircraft engine performance trend monitoring and gas path fault diagnostics are closely related technologies that assist operators in managing the health of their gas turbine engine assets. Trend monitoring is the process of monitoring the gradual performance change that an aircraft engine will naturally incur over time due to turbomachinery deterioration, while gas path diagnostics is the process of detecting and isolating the occurrence of any faults impacting engine flow-path performance. Today, performance trend monitoring and gas path fault diagnostic functions are performed by a combination of on-board and off-board strategies. On-board engine control computers contain logic that monitors for anomalous engine operation in real-time. Off-board ground stations are used to conduct fleet-wide engine trend monitoring and fault diagnostics based on data collected from each engine each flight. Continuing advances in avionics are enabling the migration of portions of the ground-based functionality on-board, giving rise to more sophisticated on-board engine health management capabilities. This paper reviews the conventional engine performance trend monitoring and gas path fault diagnostic architecture commonly applied today, and presents a proposed enhanced on-board architecture for future applications. The enhanced architecture gains real-time access to an expanded quantity of engine parameters, and provides advanced on-board model-based estimation capabilities. The benefits of the enhanced architecture include the real-time continuous monitoring of engine health, the early diagnosis of fault conditions, and the estimation of unmeasured engine performance parameters. A future vision to advance the enhanced architecture is also presented and discussed

  2. Currency Boards; The Ultimate Fix?

    OpenAIRE

    Atish R. Ghosh

    1998-01-01

    The growing integration of world capital markets has made it fashionable to argue that only extreme exchange rate regimes are sustainable. Short of adopting a common currency, currency board arrangements represent the most extreme form of exchange rate peg. This paper compares the macroeconomic performance of countries with currency boards to those with other forms of pegged exchange rate regime. Currency boards are indeed associated with better inflation performance, even allowing for potent...

  3. Automatic Flight Control System Design of Level Change Mode for a Large Aircraft

    Directory of Open Access Journals (Sweden)

    Huajun Gong

    2013-02-01

    Full Text Available The level change mode is an essential part of large civil aircraft automatic flight control systems. In cruise, with the decrease of the plane's weight caused by fuel consumption and the influence of bad weather, such as thunderstorms, the level change mode is required to solve this problem. This work establishes a nonlinear model of large aircraft, takes level changed from 9500m to 10100m as an example to design control laws for the level change mode in cruise. The classical engineering method is used to design longitudinal and lateral control laws synthetically. The flight qualities are considered in the design process. Simulation results indicate the control laws can meet design requirements and have a good anti-gust performance.

  4. EXPORT CONTROLS: Change in Export Licensing Jurisdiction for Two Sensitive Dual-Use Items

    National Research Council Canada - National Science Library

    Spencer, F

    1997-01-01

    This report examines the jurisdiction shift of two items, previously controlled by the State Department to the Department of Commerce, and the implications of this change to export licensing jurisdiction...

  5. Women on board: female board membership as a form of elite democratization

    NARCIS (Netherlands)

    Heemskerk, E.M.; Fennema, M.

    2014-01-01

    Corporate elites have been all-male bastions until the twenty-first century. The recent inclusion of women in the corporate elite needs explanation because it is an abrupt change in recruitment practices. We consider female presence in corporate boards as a sign of the democratization of elite

  6. Method of changing the control rod pattern in BWR type reactors

    International Nuclear Information System (INIS)

    Yoshida, Kenji.

    1984-01-01

    Purpose: To enable to change the control rod pattern in a short time with ease, as well as improve the availability factor of the reactor. Method: Control rods other than those being inserted into the reactor core are inserted into the reactor core to reduce the power by the reduction in the reactor core flow rate. Then, the control rod to be operated is operated partially for the change of the control rod pattern to restrict the linear heat rating of the fuels to less than 0.1 kW/ft per one hour to change the control pattern to the aimed control rod pattern. Then, the reactor core flow rate is increased after the pattern exchange for the control rod to increase the power. Since only the control rod operation is performed without adjusting the reactor core flow rate upon change of the control rod pattern, procedures can be made simply in a short time to thereby improve the availability factor of the reactor. (Moriyama, K.)

  7. Lane changing trajectory planning and tracking control for intelligent vehicle on curved road.

    Science.gov (United States)

    Wang, Lukun; Zhao, Xiaoying; Su, Hao; Tang, Gongyou

    2016-01-01

    This paper explores lane changing trajectory planning and tracking control for intelligent vehicle on curved road. A novel arcs trajectory is planned for the desired lane changing trajectory. A kinematic controller and a dynamics controller are designed to implement the trajectory tracking control. Firstly, the kinematic model and dynamics model of intelligent vehicle with non-holonomic constraint are established. Secondly, two constraints of lane changing on curved road in practice (LCCP) are proposed. Thirdly, two arcs with same curvature are constructed for the desired lane changing trajectory. According to the geometrical characteristics of arcs trajectory, equations of desired state can be calculated. Finally, the backstepping method is employed to design a kinematic trajectory tracking controller. Then the sliding-mode dynamics controller is designed to ensure that the motion of the intelligent vehicle can follow the desired velocity generated by kinematic controller. The stability of control system is proved by Lyapunov theory. Computer simulation demonstrates that the desired arcs trajectory and state curves with B-spline optimization can meet the requirements of LCCP constraints and the proposed control schemes can make tracking errors to converge uniformly.

  8. Dominant shareholders, board structure and bank performance: Evidence from Serbia

    Directory of Open Access Journals (Sweden)

    Stančić Predrag

    2012-06-01

    Full Text Available We investigate relation between board structure (size and composition and bank performance in 18 Serbian commercial banks with a dominant shareholder in 2006-2010. We analyze this relation using OLS regression analysis on an unbalanced panel dataset of 75 observations. We find no significant relation between proportion of independent directors on the board and bank performance. We also find no significant relation between bank market performance and board size. We find that bank profitability, measured by ROA and ROE, increase as the number of directors on the board decreases. This result is statistically significant after controlling for endogenous variables and unobserved macroeconomic effects. We conclude that Serbian banks with dominant shareholder should put limits on board size. The relation between bank performance and ownership concentration ratio is always negative, but significant only in case of ROA and ROE.

  9. Tethered Satellite System Contingency Investigation Board

    Science.gov (United States)

    1992-11-01

    The Tethered Satellite System (TSS-1) was launched aboard the Space Shuttle Atlantis (STS-46) on July 31, 1992. During the attempted on-orbit operations, the Tethered Satellite System failed to deploy successfully beyond 256 meters. The satellite was retrieved successfully and was returned on August 6, 1992. The National Aeronautics and Space Administration (NASA) Associate Administrator for Space Flight formed the Tethered Satellite System (TSS-1) Contingency Investigation Board on August 12, 1992. The TSS-1 Contingency Investigation Board was asked to review the anomalies which occurred, to determine the probable cause, and to recommend corrective measures to prevent recurrence. The board was supported by the TSS Systems Working group as identified in MSFC-TSS-11-90, 'Tethered Satellite System (TSS) Contingency Plan'. The board identified five anomalies for investigation: initial failure to retract the U2 umbilical; initial failure to flyaway; unplanned tether deployment stop at 179 meters; unplanned tether deployment stop at 256 meters; and failure to move tether in either direction at 224 meters. Initial observations of the returned flight hardware revealed evidence of mechanical interference by a bolt with the level wind mechanism travel as well as a helical shaped wrap of tether which indicated that the tether had been unwound from the reel beyond the travel by the level wind mechanism. Examination of the detailed mission events from flight data and mission logs related to the initial failure to flyaway and the failure to move in either direction at 224 meters, together with known preflight concerns regarding slack tether, focused the assessment of these anomalies on the upper tether control mechanism. After the second meeting, the board requested the working group to complete and validate a detailed integrated mission sequence to focus the fault tree analysis on a stuck U2 umbilical, level wind mechanical interference, and slack tether in upper tether

  10. Review on Climate Control Chamber studies in studying plant environment interaction under climate change scenarios

    OpenAIRE

    Geethalakshmi, V.; Bhuvaneshwari, K.; Lakshmanan, A.

    2011-01-01

    This Technical brief summarizes some of the studies conducted on rice using a climate control chamber and outlines the studies that will be undertaken in the Climate Control Chamber facility that has been established at the Agro Climate Research Center at Tamil Nadu Agricultural University, Coimbatore. In recent years a numbers of technologies have been developed to study the impact of climate change on agricultural systems. Crop response to climate change could be studied by using a climate ...

  11. GOVERNING BOARD OF THE PENSION FUND

    CERN Multimedia

    2002-01-01

    The Governing Board met on 9 April and 4 June. The first of these two meetings was essentially devoted to the examination and approval of the draft 2001 Annual Report of the Pension Fund and the allocation of the year's results. In the latter connection, the Governing Board decided, on the basis of the recommendations by the two firms of actuaries involved in the last actuarial review, that the amounts previously referred to in the accounts as "reserves" should be considered as part of the Fund's capital. The description of part of the Fund's assets as reserves as opposed to capital hitherto had been a matter of form rather than anything more fundamental. The Governing Board therefore formally approved this change in the Fund's accounting practices for the sake of consistency between the Accounts of the Fund and the approach adopted by the actuaries in the actuarial review. Among the other items examined during the meeting, the Governing Board approved a new strategic allocation for investments, which essenti...

  12. Adolescent and parent motivation for change affects psychotherapy outcomes among youth with poorly controlled diabetes.

    Science.gov (United States)

    Ellis, Deborah A; Berio, Heidi; Carcone, April Idalski; Naar-King, Sylvie

    2012-01-01

    Investigate effect of baseline motivation for change on treatment fidelity, therapeutic alliance, treatment dose, and treatment outcome in a randomized controlled trial of family therapy for youth with poorly controlled diabetes. Seventy-four adolescents and caregivers completed measures of motivation for change. Measures of fidelity, alliance, dose, and youth health status were collected. Structural equation modeling was used to test the direct and indirect effects of motivation on treatment outcomes. Parent motivation was significantly related to alliance and fidelity. Only alliance was significantly related to posttreatment metabolic control. In adolescent models, only motivation was significantly related to alliance. In both models, motivation had a significant indirect effect on metabolic control through alliance. Findings demonstrate the importance of parent and youth initial motivational status and treatment alliance to treatment outcome among youth with poorly controlled diabetes. Additional research on treatment techniques that promote motivation for change is needed.

  13. Inner-Learning Mechanism Based Control Scheme for Manipulator with Multitasking and Changing Load

    Directory of Open Access Journals (Sweden)

    Fangzheng Xue

    2014-05-01

    Full Text Available With the rapid development of robot technology and its application, manipulators may face complex tasks and dynamic environments in the coming future, which leads to two challenges of control: multitasking and changing load. In this paper, a novel multicontroller strategy is presented to meet such challenges. The presented controller is composed of three parts: subcontrollers, inner-learning mechanism, and switching rules. Each subcontroller is designed with self-learning skills to fit the changing load under a special task. When a new task comes, switching rule reselects the most suitable subcontroller as the working controller to handle current task instead of the older one. Inner-learning mechanism makes the subcontrollers learn from the working controller when load changes so that the switching action causes smaller tracking error than the traditional switch controller. The results of the simulation experiments on two-degree manipulator show the proposed method effect.

  14. The associations between regional gray matter structural changes and changes of cognitive performance in control groups of intervention studies

    Directory of Open Access Journals (Sweden)

    Hikaru eTakeuchi

    2015-12-01

    Full Text Available In intervention studies of cognitive training, the challenging cognitive tests, which were used as outcome measures, are generally completed in more than a few hours. Here, utilizing the control groups’ data from three 1-week intervention studies in which young healthy adult subjects underwent a wide range of cognitive tests and T1-weighted magnetic resonance imaging (MRI before and after the intervention period, we investigated how regional gray matter (GM density (rGMD of the subjects changed through voxel-based morphometry (VBM. Statistically significant increases in rGMD were observed in the anatomical cluster that mainly spread around the bilateral dorsal anterior cingulate cortex (dACC and the right superior frontal gyrus (rSFG. Moreover, mean rGMD within this cluster changes were significantly and positively correlated with performance changes in the Stroop task, and tended to positively correlate with performance changes in a divergent thinking task. Affected regions are considered to be associated with performance monitoring (dACC and manipulation of the maintained information including generating associations (rSFG, and both are relevant to the cognitive functions measured in the cognitive tests. Thus, the results suggest that even in the groups of the typical control group in intervention studies including those of the passive one, experimental or non-experimental factors can result in an increase in the regional GM structure and form the association between such neural changes and improvements related to these cognitive tests. These results suggest caution toward the experimental study designs without control groups.

  15. How can a change in the operating system of the mental health review board promote the discharge of long-term hospitalized psychiatric patients? A case study of Seoul city.

    Science.gov (United States)

    Lee, Myung-Soo; Lim, Hee-Young; Kim, Youngki; Lee, Yong-Suk

    2014-01-01

    One of the most typical and chronic problem in Korean mental health system is the prolonged length of hospital stay. In contrast to there are many components which leads to long length of stay of psychiatric patients in Korean situation such as low and fixed medical fee for psychiatric inpatient treatment, shortage of community resources, lack of care-givers' awareness and so on, there are just few mechanisms to handle this issue such as Mental Health Review Board (MHRB) which is based on Mental Health Act since 1995. However, the discharge order rate was very low and there community care system after discharge order is still very weak. The Korean government has revised the Mental Health Act in 2008 and changed the operating principals of the MHRB from a regional level to a local level to strengthen the function of MHRB. However, the discharge order rate versus the whole evaluation requests still remains at a very low level or less than 5%. And it is still very difficult to execute a discharge order against a patient whose symptoms and conditions become psychiatrically stabilized enough for discharge, due to a shortage of community care facilities and a lack of social support system. These results are exactly same with former studies. Any policies to promote psychiatric discharge including MHRB are needed to take the comprehensive factors into consideration, such as payment program, community infrastructure, increasing care-givers' acceptance and so on. Despite of the political trial of Korean government to reduce length of stay of chronic psychiatric patients, it was not successful. Still it had failed to propose a detailed policy measure in terms of the above-mentioned prerequisites. Therefore, new system and program developments including reform of payment system which reflect prior studies' recommendations are essential.

  16. Data collecting and treatment control system in the «Alpha-Electron» space experiment on board the International Space Station

    International Nuclear Information System (INIS)

    Galper, A M; Batischev, A G; Naumov, P P; Naumov, P Yu

    2017-01-01

    The fast multilayer scintillation detector of the new telescope-spectrometer for the ALFA-ELECTRON space experiment is in ground testing mode now. Modules of data control system for spectrometer are discussed. The structure of the main data format and functional blocks for data treatment are presented. The device will planned to install on the outer surface of the Russian Segment (RS) of the International Space Station (ISS) in 2018. (paper)

  17. Association of Exercise Stages of Change with Glycemic Control in Individuals with Type 2 Diabetes.

    Science.gov (United States)

    Natarajan, Sundar; Clyburn, Ernest B.; Brown, Ronald T.

    2002-01-01

    Investigated the distribution of diabetic patients' stages of change to follow an exercise regimen, examining whether later stages of change were associated with better glycemic control. Data on participants from a primary care clinic (who were predominantly black, female, and indigent) indicated that over half of were in pre-contemplation,…

  18. The reasons for changes in the control of Dutch local government

    NARCIS (Netherlands)

    ter Bogt, H.J.; Haldma, T.

    2005-01-01

    The last fifteen years have seen a succession of changes in the management control of organizations in the Dutch local government sector, i.e. municipalities and provinces. These changes relate to, for example, organizational structures, financial management and human resources management, and also

  19. Trajectories of late-life change in God-mediated control.

    Science.gov (United States)

    Hayward, R David; Krause, Neal

    2013-01-01

    To track within-individual change during late life in the sense of personal control and God-mediated control (the belief that one can work collaboratively with God to achieve one's goals and exercise control over life events) and to evaluate the hypothesis that this element of religion is related to declining personal control. A longitudinal survey representative of older White and Black adults in the United States tracked changes in personal and God-mediated control in four waves over the course of 7 years. Growth curve analysis found that the pattern of change differed by race. White adults had less sense of God-mediated control at younger ages, which increased among those who were highly religious but decreased among those who were less religious. Black adults had higher God-mediated control, which increased over time among those with low personal control. These results indicate that God-mediated control generally increases during older adulthood, but that its relationships with personal control and religious commitment are complex and differ between Black and White adults.

  20. New Technology and Changing Organisational Forms: Implications for Managerial Control and Skills.

    Science.gov (United States)

    Grimshaw, Damian; Cooke, Fang-Lee; Grugulis, Irena; Vincent, Steve

    2002-01-01

    Case studies of client relations in a call center and an information technology company's partnership with a government agency examined how new technology affects organizational structures and managerial control. Evidence suggests that new structures arise in tandem with technological changes and technology's use as a form of control differs in…

  1. Subthalamic Nucleus Deep Brain Stimulation Changes Velopharyngeal Control in Parkinson's Disease

    Science.gov (United States)

    Hammer, Michael J.; Barlow, Steven M.; Lyons, Kelly E.; Pahwa, Rajesh

    2011-01-01

    Purpose: Adequate velopharyngeal control is essential for speech, but may be impaired in Parkinson's disease (PD). Bilateral subthalamic nucleus deep brain stimulation (STN DBS) improves limb function in PD, but the effects on velopharyngeal control remain unknown. We tested whether STN DBS would change aerodynamic measures of velopharyngeal…

  2. 27 CFR 1.42 - Change in ownership, management, or control of business.

    Science.gov (United States)

    2010-04-01

    ... reference to the personal or business history of such persons as the appropriate TTB officer may require. ..., management, or control of business. 1.42 Section 1.42 Alcohol, Tobacco Products and Firearms ALCOHOL AND... ownership, management, or control of business. In the event of any change in the ownership, management, or...

  3. North Carolina Tobacco Farmers' Changing Perceptions of Tobacco Control and Tobacco Manufacturers

    Science.gov (United States)

    Crankshaw, Erik C.; Beach, Robert H.; Austin, W. David; Altman, David G.; Jones, Alison Snow

    2009-01-01

    Purpose: To examine tobacco farmers' attitudes toward tobacco control, public health, and tobacco manufacturers in order to determine the extent to which rapidly changing economic conditions have influenced North Carolina tobacco farmer attitudes in ways that may provide tobacco control advocates with new opportunities to promote tobacco control…

  4. An Olive Branch for Boards.

    Science.gov (United States)

    Harrington-Lueker, Donna

    1993-01-01

    Peacekeeping strategies for school-board meetings include developing a code of conduct that spells out guidelines for behavior and then enforcing it; bringing in a neutral observer to help board members work through what is really worrying them; and concentrating on policy. (MLF)

  5. General purpose programmable accelerator board

    Science.gov (United States)

    Robertson, Perry J.; Witzke, Edward L.

    2001-01-01

    A general purpose accelerator board and acceleration method comprising use of: one or more programmable logic devices; a plurality of memory blocks; bus interface for communicating data between the memory blocks and devices external to the board; and dynamic programming capabilities for providing logic to the programmable logic device to be executed on data in the memory blocks.

  6. Changing control and accounting regimes in an african gold mine: emergence of new despotic control

    OpenAIRE

    Tsamenyi, Mathew; Hopper, Trevor; Uddin, Shahzad

    2017-01-01

    Purpose – To examine whether the framework of management accounting transformations in Hopper et al. (2009) applies to accounting changes in the Ashanti Gold Corporation (AGC) in Ghana over 120 years from pre-colonialism to recent times.\\ud \\ud Design/methodology/approach – Mixed data sources are used, namely interviews, observations of practices, historical documentation, company reports, and research papers and theses. The results are categorized within the periods and contextual factors in...

  7. Controlled change of transport properties of poly(ethylene terephthalate) track membranes by plasma method

    International Nuclear Information System (INIS)

    Kravets, L I; Dmitriev, S N; Drachev, A I; Gilman, A B; Lazea, A; Dinescu, G

    2007-01-01

    A process of plasma polymerization of dimethylaniline and acrylic acid vapours on the surface of poly(ethylene terephthalate) track membranes has been investigated. The surface and hydrodynamic properties of the composite membranes produced in this case have been studied. It is shown that the water permeability of the obtained polymeric membranes can be controlled by changing the filtrate pH. Membranes with such properties can be used for controllable drug delivery and in sensor control

  8. 30 January 2012 - Danish National Research Foundation Chairman of board K. Bock and University of Copenhagen Rector R. Hemmingsen visiting ATLAS underground experimental area, CERN Control Centre and ALICE underground experimental area, throughout accompanied by J. Dines Hansen and B. Svane Nielsen; signing the guest book with CERN Director for Research and Scientific Computing S. Bertolucci and Head of International Relations F. Pauss.

    CERN Document Server

    Jean-Claude Gadmer

    2012-01-01

    30 January 2012 - Danish National Research Foundation Chairman of board K. Bock and University of Copenhagen Rector R. Hemmingsen visiting ATLAS underground experimental area, CERN Control Centre and ALICE underground experimental area, throughout accompanied by J. Dines Hansen and B. Svane Nielsen; signing the guest book with CERN Director for Research and Scientific Computing S. Bertolucci and Head of International Relations F. Pauss.

  9. 49 CFR 1011.5 - Employee boards.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 8 2010-10-01 2010-10-01 false Employee boards. 1011.5 Section 1011.5... OF TRANSPORTATION GENERAL RULES AND REGULATIONS BOARD ORGANIZATION; DELEGATIONS OF AUTHORITY § 1011.5 Employee boards. This section covers matters assigned to the Accounting Board, a board of employees of the...

  10. 12 CFR 225.88 - How to request the Board to determine that an activity is financial in nature or incidental to a...

    Science.gov (United States)

    2010-01-01

    ... activity is financial in nature or incidental to a financial activity? 225.88 Section 225.88 Banks and... COMPANIES AND CHANGE IN BANK CONTROL (REGULATION Y) Regulations Financial Holding Companies § 225.88 How to request the Board to determine that an activity is financial in nature or incidental to a financial...

  11. Age-related changes in strategic variations during arithmetic problem solving: The role of executive control.

    Science.gov (United States)

    Hinault, T; Lemaire, P

    2016-01-01

    In this review, we provide an overview of how age-related changes in executive control influence aging effects in arithmetic processing. More specifically, we consider the role of executive control in strategic variations with age during arithmetic problem solving. Previous studies found that age-related differences in arithmetic performance are associated with strategic variations. That is, when they accomplish arithmetic problem-solving tasks, older adults use fewer strategies than young adults, use strategies in different proportions, and select and execute strategies less efficiently. Here, we review recent evidence, suggesting that age-related changes in inhibition, cognitive flexibility, and working memory processes underlie age-related changes in strategic variations during arithmetic problem solving. We discuss both behavioral and neural mechanisms underlying age-related changes in these executive control processes. © 2016 Elsevier B.V. All rights reserved.

  12. Estrogenic control of behavioral sex change in the bluehead wrasse, Thalassoma bifasciatum.

    Science.gov (United States)

    Marsh-Hunkin, K Erica; Heinz, Heather M; Hawkins, M Beth; Godwin, John

    2013-12-01

    Estrogens activate male-typical sexual behavior in several mammalian and avian models. Estrogen signaling also appears critical in the control of sex change in some fishes, in which it is instead decreases in estradiol levels that may permit development of male-typical behaviors. The bluehead wrasse is a protogynous hermaphrodite that exhibits rapid increases in aggressive and male-typical courtship behavior as females undergo sex change. Removal of the ovaries does not prevent these changes. In two field experiments involving gonadally-intact and gonadectomized females, estradiol (E2) implants prevented behavioral sex change in large females who were made the largest members of their social groups through removals of more dominant fish. In contrast, cholesterol-implanted control females showed full behavioral sex change, along with a higher frequency both of aggressive interactions and of male-typical courtship displays than occurred in E2-implanted animals. To assess potential neural correlates of these behavioral effects of E2, we evaluated abundances of aromatase mRNA using in situ hybridization. Aromatase mRNA was more abundant in the POA of E2-implanted females than in cholesterol-implanted controls in gonadally-intact females. The lack of behavioral sex change coupled with increased levels of aromatase mRNA are consistent with an inhibitory role for E2, likely of neural origin, in regulating socially controlled sex change.

  13. Interdecadal Change of Tropical Cyclone Genesis Controlling Parameter in Western North Pacific

    Science.gov (United States)

    Li, T.

    2017-12-01

    The main environmental parameter controlling tropical cyclone (TC) genesis in the western North Pacific (WNP) changed in different interdecadal periods. The interannual variability of TC genesis frequency was primarily control by specific humidity in 1950-1976, sea surface temperature (SST) in 1977-1998, and vorticity in 1999-2014. A further diagnosis shows that the change of environmental specific humidity during 1950-1976 was attributed to anomalous advection of mean moisture during ENSO developing summer. The SST change during 1977-1998 was associated with circulation change during ENSO decaying summer. The change of environment vorticity was primarily related to CP-type El Niño during 1999-2014. The ultimate cause of the controlling parameter change is attributed to the change of ENSO behavior. Compared to the first period, a stronger EP-type ENSO variability in the second period leads to a stronger circulation/SST response during ENSO decaying phase. The occurrence of more frequent CP type El Niño in the third period was responsible for greater vorticity controlling in the WNP.

  14. Lane Changing Trajectory Planning and Tracking Controller Design for Intelligent Vehicle Running on Curved Road

    Directory of Open Access Journals (Sweden)

    Lie Guo

    2014-01-01

    Full Text Available To enhance the active safety and realize the autonomy of intelligent vehicle on highway curved road, a lane changing trajectory is planned and tracked for lane changing maneuver on curved road. The kinematics model of the intelligent vehicle with nonholonomic constraint feature and the tracking error model are established firstly. The longitudinal and lateral coupling and the difference of curvature radius between the outside and inside lane are taken into account, which is helpful to enhance the authenticity of desired lane changing trajectory on curved road. Then the trajectory tracking controller of closed-loop control structure is derived using integral backstepping method to construct a new virtual variable. The Lyapunov theory is applied to analyze the stability of the proposed tracking controller. Simulation results demonstrate that this controller can guarantee the convergences of both the relative position tracking errors and the position tracking synchronization.

  15. Welfare specifications and optimal control of climate change. An application of fund

    Energy Technology Data Exchange (ETDEWEB)

    Tol, Richard S.J. [Centre for Marine and Climate Research, Hamburg University, Hamburg (Germany)

    2002-07-01

    The sensitivity of the optimal control of carbon dioxide emissions to the specification of the social welfare function is systematically explored using the FUND model. Increasing risk aversion emphasises climate change damages relative to emission reduction costs, but at the same time increases the discount rate of consumption. Without international co-operation, the discount rate effect dominates so that optimal control decreases with increasing risk aversion. With international co-operation, optimal control first increases then decreases with increasing risk aversion. Since climate change falls heaviest on the poor, optimal control increases with increasing inequity aversion. Full-fledged intergenerational welfare functions on the one hand emphasise climate change damages but on the other hand place more weight on current, poorer generations. In FUND, the two tendencies almost cancel.

  16. Changes of NSSS control system setpoint for operation at reduced temperature at YGN 3 and 4

    International Nuclear Information System (INIS)

    Song, I. H.; Son, S. H.; Lee, K. C.; Son, J. J.; Seo, J. T.; Lee, S. H.; Park, W. K.; Hwang, H. C.; Lee, J. H.

    2003-01-01

    The differences of the design operational conditions and best estimate operational conditions, which were expected to be conditions during the plant operation, during the application of operation at reduced temperature at YGN 3 and 4 are larger than those during the construction period. Therefore, each sets of NSSS control system setpoints were generated for ORT design operational condition and for ORT best estimate operational condition. The analytical results shows that the plant performance requirements are satisfied by changing the NSSS control system setpoints for each operational conditions. The NSSS control system setpoints were changed after power operation after application of the ORT due to unexpected mismatch of plant conditions from the best estimate operational conditions. The plant conditions are needed to be monitored cycle by cycle for the detection of such conditions which requires the changing of the NSSS control system

  17. [The role of university hospital executive board members].

    Science.gov (United States)

    Debatin, J F; Rehr, J

    2009-09-01

    Demographic changes and medical progress in combination with vastly altered regulatory and economic environments have forced considerable change in the structure of German university hospitals in recent years. These changes have affected medical care as well as research and medical school training. To allow for more flexibility and a higher level of reactivity to the changing environment German university hospitals were transferred from state agencies to independent corporate structures. All but one remains wholly owned by the respective state governments. The governing structure of these independent medical hospitals consists of an executive board, generally made up of a medical director, a financial director, a director for nursing, and the dean of the medical faculty. In most hospitals, the medical director serves as chief executive officer. The regulations governing the composition and responsibility of the members of the executive board differ from state to state. These differences do affect to some degree the interactive effectiveness of the members of the executive boards. Modalities that stress the overall responsibility for all board members seem to work better than those that define clear portfolio limits. Even more than organizational and regulatory differences, the effectiveness of the work of the executive boards is influenced by the personality of the board members themselves. Success appears to be a clear function of the willingness of all members to work together.

  18. Life after hospital: trials of a boarding house 'mother'.

    Science.gov (United States)

    Bailey, M; Brodaty, H

    1982-12-01

    What is life like for the many psychiatric patients discharged from hospital to boarding houses? The 'mother' of a Sydney boarding house describes how her 'family' has taken root, grown, developed and made a stable home. Many behaviours not tolerated in the community (e.g. public masturbation) are acceptable in the home but there are limits and rules (e.g. not in the dining room). A good home needs the responsible person to be open, honest, understanding and sensitive to changes in guests. Psychiatric services and welfare agencies need to recognise the major contributions of well-run boarding houses and need to liaise more with the proprietors.

  19. An international nanoscience advisory board to improve and harmonize nanotechnology oversight

    International Nuclear Information System (INIS)

    Marchant, Gary E.; White, Andrew

    2011-01-01

    As governments around the world begin to implement regulations aimed at controlling nanotechnology, those regulations should be based upon the best available science, applied as consistently as possible within jurisdictions and, to the extent feasible, across jurisdictions. These goals would be easier to achieve with the creation of an international nanoscience advisory board. Such a body could be modeled on similar international scientific advisory bodies for other issues, such as the Intergovernmental Panel on Climate Change (IPCC) and the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services. Such a body should also take into account lessons learned from these similar organizations. An international nanoscience advisory board could assist regulatory bodies by providing a central source of accurate scientific information about the risks and benefits of nanotechnology, including relevant uncertainties, rather than having each regulatory body make these determinations independently. An international nanoscience advisory board could facilitate harmonization within and between jurisdictions by involving the top experts in the field to produce a centralized knowledge base for regulatory decisions. While an international nanoscience advisory board presents many potential benefits, it also faces significant difficulties, which are best illustrated by examining the history and challenges of existing international science advisory bodies.

  20. Intelligent control for PMSM based on online PSO considering parameters change

    Science.gov (United States)

    Song, Zhengqiang; Yang, Huiling

    2018-03-01

    A novel online particle swarm optimization method is proposed to design speed and current controllers of vector controlled interior permanent magnet synchronous motor drives considering stator resistance variation. In the proposed drive system, the space vector modulation technique is employed to generate the switching signals for a two-level voltage-source inverter. The nonlinearity of the inverter is also taken into account due to the dead-time, threshold and voltage drop of the switching devices in order to simulate the system in the practical condition. Speed and PI current controller gains are optimized with PSO online, and the fitness function is changed according to the system dynamic and steady states. The proposed optimization algorithm is compared with conventional PI control method in the condition of step speed change and stator resistance variation, showing that the proposed online optimization method has better robustness and dynamic characteristics compared with conventional PI controller design.

  1. Brain limbic system-based intelligent controller application to lane change manoeuvre

    Science.gov (United States)

    Kim, Changwon; Langari, Reza

    2011-12-01

    This paper presents the application of a novel neuromorphic control strategy for lane change manoeuvres in the highway environment. The lateral dynamics of a vehicle with and without wind disturbance are derived and utilised to implement a control strategy based on the brain limbic system. To show the robustness of the proposed controller, several disturbance conditions including wind, uncertainty in the cornering stiffness, and changes in the vehicle mass are investigated. To demonstrate the performance of the suggested strategy, simulation results of the proposed method are compared with the human driver model-based control scheme, which has been discussed in the literature. The simulation results demonstrate the superiority of the proposed controller in energy efficiency, driving comfort, and robustness.

  2. Single-board 32-bit computer for the FASTBUS

    International Nuclear Information System (INIS)

    Kellner, R.; Blossom, J.M.; Hong, J.P.

    1985-01-01

    The Los Alamos National Laboratory is building a 32bit computer on a FASTBUS board. It will use the National Semiconductor 32032 chip set, including the demand-paged memory management, floating point slave processor and interrupt control chips. The board will support 4 megabytes of memory which can be accessed by the processor over an on-board execution bus at processor speeds and which can be accessed by the FASTBUS at 80 megabytes per second. A windowed, direct memory access mechanism allows transfers of up to all of the memory

  3. Board-to-Board Free-Space Optical Interconnections Passing through Boards for a Bookshelf-Assembled Terabit-Per-Second-Class ATM Switch.

    Science.gov (United States)

    Hirabayashi, K; Yamamoto, T; Matsuo, S; Hino, S

    1998-05-10

    We propose free-space optical interconnections for a bookshelf-assembled terabit-per-second-class ATM switch. Thousands of arrayed optical beams, each having a rate of a few gigabits per second, propagate vertically to printed circuit boards, passing through some boards, and are connected to arbitrary transmitters and receivers on boards by polarization controllers and prism arrays. We describe a preliminary experiment using a 1-mm-pitch 2 x 2 beam-collimator array that uses vertical-cavity surface-emitting laser diodes. These optical interconnections can be made quite stable in terms of mechanical shock and temperature fluctuation by the attachment of reinforcing frames to the boards and use of an autoalignment system.

  4. Canada - Atomic Energy Control Board, Canada. Summary of a common cause failure event which occurred in a Canadian utility. 'Failure to Verify Poison Isotopic'

    International Nuclear Information System (INIS)

    1996-01-01

    Operating Policies and Principles (OP and Ps) are referenced in the reactor operating license. They contain not only general safety principles, but also define safety parameters and their numerical values for the operation of the nuclear power plant. The event described highlights the difficulties to implement the OP and Ps into detailed purchase orders. In Candu reactors gadolinium nitrate and boric oxide are used as neutron absorbers in the moderator. The concentration of neutron absorbers in the moderator is safety significant because a small change in concentration in coincidence with other failures (e.g. LOCA) can result in a sudden increase of power. To ensure that new shipments of gadolinium nitrate or boric acid meet the required specifications, these must undergo quarantine so that samples could be taken and forwarded for analysis. The chemistry unit of the NPP issued this requirements in a 'note to file'. In the event, two separated purchase orders, one for gadolinium nitrate and one for boric oxide, were placed. The purchase orders did not stipulate the requirements to quarantine, inform the chemistry unit or to analyse samples. They only stated that correct isotopic and chemical purity were required. The gadolinium nitrate as well as the boron oxide were both not quarantined and even the purity was not verified. The chemistry unit felt that a 'note to file' memo was sufficient to ensure that the OP and Ps are met taking into account the low shipment rate and sufficient experiences before. The analysis of the event revealed several causal factors. Four main factors were pointed out: - Work practices, - Resource Management, - Written communication, - Managerial methods. The actions taken after the event focused on the identified deficiencies

  5. Temperature Control of Heating Zone for Drying Process: Effect of Air Velocity Change

    Directory of Open Access Journals (Sweden)

    Wutthithanyawat Chananchai

    2016-01-01

    Full Text Available This paper proposes a temperature control technique to adjust air temperature in a heating zone for drying process. The controller design is achieved by using an internal model control (IMC approach. When the IMC controller parameters were designed by calculating from an actual process transfer function estimated through an open-loop step response with input step change from 50% to 60% at a reference condition at air velocity of 1.20 m/s, the performance of temperature controller was experimentally tested by varying an air velocity between 1.32 m/s and 1.57 m/s, respectively. The experimental results showed that IMC controller had a high competency for controlling the drying temperature.

  6. [Study on the change of semantic perspective of schistosomiasis control in China].

    Science.gov (United States)

    Zhou, Li-ying; Liu, Si-yuan; Li, Yu-ye; Deng, Yao; Yang, Kun

    2015-12-01

    To analyze the evolution process, discourse and semantic meaning of schistosomiasis prevention and control, so as to provide suggestions for control work. The official documents and mainstream media reports of schistosomiasis prevention and control were selected at different periods as discourse samples, and the deep social reasons behind the strategy change and the semantic meaning of the utterance were analyzed at different periods. The discourse of schistosomiasis prevention and control experienced the evolution of the political discourse, pluralistic discourse and public discourse, and the semantic connotations showed the authority conflict semantic features, and then transferred to semantic cooperation. The prevention and control of schistosomiasis have different semantic meanings at different periods, and the prevention and control work should correspond to a social practice, seek truth from facts, correctly understand the actual situation, and then establish the effective control policy.

  7. Association of Regulatory Boards of Optometry

    Science.gov (United States)

    ... website of the Association of Regulatory Boards of Optometry (ARBO). ARBO's web site is designed to provide resources to regulatory boards of optometry throughout the world. State/Provincial/Territorial Boards of ...

  8. 76 FR 21877 - Environmental Management Advisory Board

    Science.gov (United States)

    2011-04-19

    ... DEPARTMENT OF ENERGY Environmental Management Advisory Board AGENCY: Department of Energy. ACTION: Notice of call for nominations for appointment to the Environmental Management Advisory Board. SUMMARY... Environmental Management Advisory Board. DATES: Nominations will be accepted through May 13, 2011. ADDRESSES...

  9. Organizational models as configurations of structure, culture, leadership, control, and change strategy

    Directory of Open Access Journals (Sweden)

    Janićijević Nebojša

    2017-01-01

    Full Text Available Starting from the axioms of consistency, stability, contingency, and configuration, research on organizational structure, culture, control, leadership, and change management strategy has shown that their typical configurations, or models, can be differentiated according to the same two criteria: distribution of power and dominant organizational dimension. On the one hand there are models of structure, culture, control, leadership, and change management strategy that are based on an unequal, or authoritarian, distribution of power within organizations, while on the other hand there are models that are based on democratic, or equal, distribution of power. Also, on the one hand there are models of structure, culture, control, leadership, and change strategy that are based on work structure and tasks, while on the other hand there are models of these organizational components that are based on social structure, people, and their relationships. Harmonization of typical configurations of organizational structure, culture, control, leadership, and change strategy occurs due to the harmonization of the differentiation criteria. Based on this harmonization, four organizational models have been identified as typical configurations of structure, culture, control, leadership, and change strategy: the autocratic, bureaucratic, innovative, and task models. Each of these models is effective in a different environmental contingency.

  10. Board diversity and self-regulation in Dutch pension funds

    OpenAIRE

    Shi, Lin; Swinkels, Laurens; Lecq, Fieke

    2016-01-01

    markdownabstractPurpose - The purpose of this paper is to examine the change in pension fund board diversity after self-regulation was introduced, and investigate which pension fund characteristics influence compliance with self-regulation. In addition, the authors analyze whether compliance might be achieved by tokenism. Design/methodology/approach - The authors hand-collect pension fund and pension fund board data of the largest (by assets) 200 pension funds in the Netherlands. The authors ...

  11. 78 FR 66384 - Membership of the Merit Systems Protection Board's Performance Review Board

    Science.gov (United States)

    2013-11-05

    ... MERIT SYSTEMS PROTECTION BOARD Membership of the Merit Systems Protection Board's Performance Review Board AGENCY: Merit Systems Protection Board. ACTION: Notice. SUMMARY: Notice is hereby given of the members of the Merit Systems Protection Board's Performance Review Board. DATES: November 5, 2013...

  12. The Role of Neuromuscular Changes in Aging and Knee Osteoarthritis on Dynamic Postural Control

    Science.gov (United States)

    Takacs, Judit; Carpenter, Mark G.; Garland, S. Jayne; Hunt, Michael A.

    2013-01-01

    Knee osteoarthritis (OA) is a chronic joint condition, with 30% of those over the age of 75 exhibiting severe radiographic disease. Nearly 50% of those with knee OA have experienced a fall in the past year. Falls are a considerable public health concern, with a high risk of serious injury and a significant socioeconomic impact. The ability to defend against a fall relies on adequate dynamic postural control, and alterations in dynamic postural control are seen with normal aging. Neuromuscular changes associated with aging may be responsible for some of these alterations in dynamic postural control. Even greater neuromuscular deficits, which may impact dynamic postural control and the ability to defend against a fall, are seen in people with knee OA. There is little evidence to date on how knee OA affects the ability to respond to and defend against falls and the neuromuscular changes that contribute to balance deficits. As a result, this review will: summarize the key characteristics of postural responses to an external perturbation, highlight the changes in dynamic postural control seen with normal aging, review the neuromuscular changes associated with aging that have known and possible effects on dynamic postural control, and summarize the neuromuscular changes and balance problems in knee OA. Future research to better understand the role of neuromuscular changes in knee OA and their effect on dynamic postural control will be suggested. Such an understanding is critical to the successful creation and implementation of fall prevention and treatment programs, in order to reduce the excessive risk of falling in knee OA. PMID:23696951

  13. New On-board Microprocessors

    Science.gov (United States)

    Weigand, R.

    Two new processor devices have been developed for the use on board of spacecrafts. An 8-bit 8032-microcontroller targets typical controlling applications in instruments and sub-systems, or could be used as a main processor on small satellites, whereas the LEON 32-bit SPARC processor can be used for high performance controlling and data processing tasks. The ADV80S32 is fully compliant to the Intel 80x1 architecture and instruction set, extended by additional peripherals, 512 bytes on-chip RAM and a bootstrap PROM, which allows downloading the application software using the CCSDS PacketWire pro- tocol. The memory controller provides a de-multiplexed address/data bus, and allows to access up to 16 MB data and 8 MB program RAM. The peripherals have been de- signed for the specific needs of a spacecraft, such as serial interfaces compatible to RS232, PacketWire and TTC-B-01, counters/timers for extended duration and a CRC calculation unit accelerating the CCSDS TM/TC protocol. The 0.5 um Atmel manu- facturing technology (MG2RT) provides latch-up and total dose immunity; SEU fault immunity is implemented by using SEU hardened Flip-Flops and EDAC protection of internal and external memories. The maximum clock frequency of 20 MHz allows a processing power of 3 MIPS. Engineering samples are available. For SW develop- ment, various SW packages for the 8051 architecture are on the market. The LEON processor implements a 32-bit SPARC V8 architecture, including all the multiply and divide instructions, complemented by a floating-point unit (FPU). It includes several standard peripherals, such as timers/watchdog, interrupt controller, UARTs, parallel I/Os and a memory controller, allowing to use 8, 16 and 32 bit PROM, SRAM or memory mapped I/O. With on-chip separate instruction and data caches, almost one instruction per clock cycle can be reached in some applications. A 33-MHz 32-bit PCI master/target interface and a PCI arbiter allow operating the device in a plug-in card

  14. An embedded single-board computer for BPM of SSRF

    International Nuclear Information System (INIS)

    Chen Kai; Liu Shubin; Yan Han; Wu Weihao; Zhao Lei; An Qi; Leng Yongbin; Yi Xing; Yan Yingbing; Lai Longwei

    2011-01-01

    An embedded single-board computer (SBC) system based on AT91RM9200 was designed for monitoring and controlling the digital beam position monitor system of Shanghai Synchrotron Radiation Facility (SSRF) through the Virtex-4 FPGA in the digital processing board. The SBC transfers the configuration commands from the remote EPICS to the FPGA, and calculates the beam position data. The interface between the FPGA and the SBC is the Static Memory Controller (SMC) with a peak transfer speed of up to 349 Mbps. The 100 Mb Ethernet is used for data transfer between the EPICS and SBC board, and a serial port serves as monitoring the status of the embedded system. Test results indicate that the SBC board functions well. (authors)

  15. Investigation on energy storage and quick load change control of subcritical circulating fluidized bed boiler units

    International Nuclear Information System (INIS)

    Gao, Mingming; Hong, Feng; Liu, Jizhen

    2017-01-01

    Highlights: • The model of energy storage of subcritical CFB boilers is established. • The capacity and increment rate of heat storage are quantified. • A novel load control strategy is proposed to improve the quick load change ability. • An application on the 300 MW CFB unit proves the load change rate to 5–8 MW/min. - Abstract: The energy storage of circulating fluidized bed (CFB) boilers on fuel side cannot be ignored due to the special combustion type different from pulverized coal boilers. The sizable energy storage makes it possible for CFB units to enhance the quick load change ability and to increase the scale of new energy power connected into grid. Through mechanism analysis, the model of energy storage of subcritical CFB boilers has been established for the first time. Then by the project practice, the quantitative analysis is demonstrated for the capacity and control characteristics of energy storage on fuel side and steam water side. Based on the control characteristics and the transformation of the energy storage, a coordinated control system (CCS) control strategy named advanced energy balance (AEB) is designed to shorten the response time through the use of energy storage and to accelerate the load change speed of subcritical CFB units. Finally, a case study on a 300 MW CFB unit proves the feasibility of the proposed control strategy.

  16. A BOARD GAME AND CYBERNETICS

    Directory of Open Access Journals (Sweden)

    Dana NICULA

    2017-12-01

    Full Text Available Complex adaptive systems use a great amount of computer simulations to generate data and emphasize patterns in systems. In order to simulate a systems complex behavior in a faster and more pleasant maner we have used a multiplayer non-deterministic board game. Our conviction was that games can serve as an interactive education tool and we wanted to help students understand the properties of a complex adaptive systems. As a cybernetic system, the rules of a game define the sensors, comparators, and activators of the game's feedback loops. Within a game, there are many sub-systems that regulate the flow of play, dynamically changing and transforming game elements. Incorporating a game such as The Settlers of Catan into a classroom increased students’ engagement and helped them retrieve insight about how feedback loops look like in real life and what’s the exemplification of an adaptive behavior. The aim of this article is to share the relevance of the use of SOC for learning about complex adaptive systems.

  17. 12 CFR 250.181 - Reports of change in control of bank management incident to a merger.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Reports of change in control of bank management... change in control of bank management incident to a merger. (a) A State member bank has inquired whether Pub. L. 88-593 (78 Stat. 940) requires reports of change in control of bank management in situations...

  18. An innovative "ChemicalVia" process for the production of high density interconnect printed circuit boards The ATLAS muon chamber quality control with the X-ray tomograph at CERN

    CERN Document Server

    Da Silva, Vitor; Watts, David; Van der Bij, Erik; Banhidi, Z; Berbiers, Julien; Lampl, W; Marchesotti, M; Rangod, Stephane; Sbrissa, E; Schuh, S; Voss, Rüdiger; Zhuravlov, V

    2004-01-01

    The ChemicalVia process, patented by CERN, provides a new method of making microvias in high-density multilayer printed circuit boards of different types, such as sequential build-up (SBU), high density interconnected (HDI), or laminated multi-chip modules (MCM-L). The process uses chemical etching instead of laser, plasma or other etching techniques and can be implemented in a chain production line. This results in an overall reduced operation and maintenance cost and a much shorter hole production time as compared with other microvia processes. copy Emerald Group Publishing Limited. 4 Refs.4 An essential part of the Muon Spectrometer of the ATLAS experiment is based on the Monitored Drift Tube (MDT) technology. About 1200 muon drift chambers are being built at 13 institutes all over the world. The MDT chambers require an exceptional mechanical construction accuracy of better than 20 mu m. A dedicated X-ray tomograph has been developed at CERN since 1996 to control the mechanical quality of the chambers. The...

  19. Modeling Cerebral Blood Flow Control During Posture Change from Sitting to Standing

    DEFF Research Database (Denmark)

    Olufsen, Mette; Tran, Hien; Ottesen, Johnny T.

    2004-01-01

    , the heart, and venous valves. We use physiologically based control mechanisms to describe the regulation of cerebral blood velocity and arterial pressure in response to orthostatic hypotension resulting from postural change. Beyond active control mechanisms we also have to include certain passive non......Hypertension, decreased cerebral blood flow, and diminished cerebral blood flow regulation, are among the first signs indicating the presence of cerebral vascular disease. In this paper, we will present a mathematical model that can predict blood flow and pressure during posture change from sitting......-linearities in some of the compliance-pressure and resistance-pressure relationships. Futhermore, an acurate and physiologically based submodel, describing the dynamics of how gravity effects the blood distribution during suspine changes, is included. To justify the fidelity of our mathematical model and control...

  20. The Versatile Link Demo Board (VLDB)

    International Nuclear Information System (INIS)

    Lesma, R. Martín; Alessio, F.; Barbosa, J.; Baron, S.; Caplan, C.; Leitao, P.; Porret, D.; Wyllie, K.; Pecoraro, C.

    2017-01-01

    The Versatile Link Demonstrator Board (VLDB) is the evaluation kit for the radiation-hard Optical Link ecosystem, which provides a 4.8 Gbps data transfer link for communication between front-end (FE) and back-end (BE) of the High Energy Physics experiments. It gathers the Versatile link main radiation-hard custom Application-Specific Integrated Circuits (ASICs) and modules: GBTx, GBT-SCA and VTRx/VTTx plus the FeastMP, a radiation-hard in-house designed DC-DC converter. This board is the first design allowing system-level tests of the Link with a complete interconnection of the constitutive components, allowing data acquisition, control and monitoring of FE devices with the GBT-SCA pair.