WorldWideScience

Sample records for chains

  1. Falling chains

    Science.gov (United States)

    Wong, Chun Wa; Yasui, Kosuke

    2006-06-01

    The one-dimensional fall of a folded chain with one end suspended from a rigid support and a chain falling from a resting heap on a table is studied. Because their Lagrangians contain no explicit time dependence, the falling chains are conservative systems. Their equations of motion are shown to contain a term that enforces energy conservation when masses are transferred between subchains. We show that Cayley's 1857 energy nonconserving solution for a chain falling from a resting heap is incorrect because it neglects the energy gained when a link leaves a subchain. The maximum chain tension measured by Calkin and March for the falling folded chain is given a simple if rough interpretation. Other aspects of the falling folded chain are briefly discussed.

  2. Unwrapping Chains

    CERN Document Server

    Cambou, A D; Hamm, E; Hanna, J A; Menon, N; Santangelo, C D; Walsh, L

    2012-01-01

    A loop of chain can move along its own tangents, maintaining a steady shape. An open-ended chain undergoing a nontrivial motion must change its shape. One consequence is that chains pulled around objects will fail to follow the contours of the objects, unwrapping themselves instead. This short note accompanies a fluid dynamics video submission (83068) to the APS DFD Gallery of Fluid Motion 2012.

  3. Falling chains

    CERN Document Server

    Wong, C W; Wong, Chun Wa; Yasui, Kosuke

    2006-01-01

    The one-dimensional falling motion of a bungee chain suspended from a rigid support and of a chain falling from a resting heap on a table is studied. Their Lagrangians are found to contain no explicit time dependence. As a result, these falling chains are conservative systems. Each of their Lagrange's equations of motion is shown to contain a term that enforces energy conservation when masses are transferred between subchains. We show in particular that Cayley's 1857 energy nonconserving solution for a chain falling from a resting heap is incorrect because it neglects the energy gained when the transferred link is emitted by the emitting subchain. The maximum chain tension measured by Calkin and March for the falling bungee chain is given a simple if rough interpretation. In the simplified one-dimensional treatment, the kinetic energy of the center of mass of the falling bungee chain is found to be converted by the chain tension at the rigid support into the internal kinetic energy of the chain. However, as t...

  4. Chain Gang

    Science.gov (United States)

    2006-01-01

    6 August 2006 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a chain of clustered and battered craters. These were formed by secondary impact. That is, somewhere to the south (beyond the bottom of this image), a large impact crater formed. When this occurred, material ejected from the crater was thrown tens to hundreds of kilometers away. This material then impacted the martian surface, forming clusters and chains of smaller craters. Location near: 15.8oN, 35.6oW Image width: 3 km (1.9 mi) Illumination from: upper left Season: Northern Spring

  5. Graphs: Associated Markov Chains

    OpenAIRE

    2012-01-01

    In this research paper, weighted / unweighted, directed / undirected graphs are associated with interesting Discrete Time Markov Chains (DTMCs) as well as Continuous Time Markov Chains (CTMCs). The equilibrium / transient behaviour of such Markov chains is studied. Also entropy dynamics (Shannon entropy) of certain structured Markov chains is investigated. Finally certain structured graphs and the associated Markov chains are studied.

  6. Logistic chain modelling

    NARCIS (Netherlands)

    Slats, P.A.; Bhola, B.; Evers, J.J.M.; Dijkhuizen, G.

    1995-01-01

    Logistic chain modelling is very important in improving the overall performance of the total logistic chain. Logistic models provide support for a large range of applications, such as analysing bottlenecks, improving customer service, configuring new logistic chains and adapting existing chains to n

  7. Health supply chain management.

    Science.gov (United States)

    Zimmerman, Rolf; Gallagher, Pat

    2010-01-01

    This chapter gives an educational overview of: * The actual application of supply chain practice and disciplines required for service delivery improvement within the current health environment. * A rationale for the application of Supply Chain Management (SCM) approaches to the Health sector. * The tools and methods available for supply chain analysis and benchmarking. * Key supply chain success factors.

  8. Sustainable Supply Chain Design

    DEFF Research Database (Denmark)

    Bals, Lydia; Tate, Wendy

    to implement TBL goals across the supply chain. In supply chain design, the classic economic perspective still dominates, although the idea of the TBL is more widely disseminated. The purpose of this research is to add to the sustainable supply chain management literature (SSCM) research agenda......A significant conceptual and practical challenge is how to integrate triple bottom line (TBL; including economic, social and environmental) sustainability into global supply chains. Although this integration is necessary to slow down global resource depletion, understanding is limited of how...... by incorporating the physical chain, and the (information and financial) support chains into supply chain design. This manuscript tackles issues of what the chains are designed for and how they are designed structurally. Four sustainable businesses are used as illustrative case examples of innovative supply chain...

  9. The Global Value Chain

    DEFF Research Database (Denmark)

    Sørensen, Olav Jull

    The conference paper aims to develop the global value chain concept by including corporate internal value adding activities and competition to the basic framework in order to turn the global value chain into a strategic management tool......The conference paper aims to develop the global value chain concept by including corporate internal value adding activities and competition to the basic framework in order to turn the global value chain into a strategic management tool...

  10. Serum Free Light Chains

    Science.gov (United States)

    ... or of one of its component parts – a kappa or lambda light chain, or rarely, a heavy chain. Traditionally, plasma cell ... protein (M-protein) production and to calculate a kappa/lambda free light chain ratio. If the protein electrophoresis test is abnormal, ...

  11. Gushing metal chain

    Science.gov (United States)

    Belyaev, Alexander; Sukhanov, Alexander; Tsvetkov, Alexander

    2016-03-01

    This article addresses the problem in which a chain falls from a glass from some height. This phenomenon demonstrates a paradoxical rise of the chain over the glass. To explain this effect, an initial hypothesis and an appropriate theory are proposed for calculating the steady fall parameters of the chain. For this purpose, the modified Cayley's problem of falling chain given its rise due to the centrifugal force of upward inertia is solved. Results show that the lift caused by an increase in linear density at the part of chain where it is being bent (the upper part) is due to the convergence of the chain balls to one another. The experiments confirm the obtained estimates of the lifting chain.

  12. Supply Chain Management og Supply Chain costing

    DEFF Research Database (Denmark)

    Nielsen, Steen; Mortensen, Ole

    2002-01-01

    Formålet med denne artikel er at belyse de muligheder som ligger i at integrere virksomhedens økonomiske styring med begrebet Supply Chain Management (SCM). Dette søges belyst ved først at beskrive den teoretiske ramme, hvori SCM indgår. Herefter analyseres begrebet Supply Chain Costing (SCC) som...... Århus. Et resultat er, at via begrebet Supply Chain Costing skabes der mulighed for at måle logistikkædens aktiviteter i kr./øre. Anvendelsen af denne information har også strategisk betydning for at kunne vælge kunde og leverandør. Ved hjælp af integrationen skabes der også helt nye mulighed...

  13. Understanding the Chain Fountain

    CERN Document Server

    Biggins, John Simeon

    2013-01-01

    If a chain is initially at rest in a beaker at a height h1 above the ground, and the end of the chain is pulled over the rim of the beaker and down towards the ground and then released, the chain will spontaneously "flow" out of the beaker under gravity. Furthermore, if h1 is sufficient, the beads do not simply drag over the edge of the beaker but form a fountain reaching a height h2 above it. We show that the formation of a fountain requires that the beads come into motion not only by being pulled upwards by the part of the chain immediately above the pile, but also by being pushed upwards by an anomalous reaction force from the pile of stationary chain. We propose possible origins for this force, argue that its magnitude will be proportional to the square of the chain velocity, and predict and verify experimentally that h2 is proportional to h1.

  14. Food supply chains

    OpenAIRE

    Zhou, Qian

    2011-01-01

    The dissertation analyses food waste in global supply chain. From the related managerial literature, the process of supply chain operation, from agriculture, manufacturing, warehouses, retailers to customers are explained clearly. Then the reasons and characteristics of food wastes in any point of food supply chain are analyzed. From some case studies and questionnaire investigation, some corresponding methods to reduce food waste are put forward in the following. Lastly, in terms of method s...

  15. Supply chain components

    Directory of Open Access Journals (Sweden)

    Vieraşu, T.

    2011-01-01

    Full Text Available In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

  16. Supply chain planning classification

    Science.gov (United States)

    Hvolby, Hans-Henrik; Trienekens, Jacques; Bonde, Hans

    2001-10-01

    Industry experience a need to shift in focus from internal production planning towards planning in the supply network. In this respect customer oriented thinking becomes almost a common good amongst companies in the supply network. An increase in the use of information technology is needed to enable companies to better tune their production planning with customers and suppliers. Information technology opportunities and supply chain planning systems facilitate companies to monitor and control their supplier network. In spite if these developments, most links in today's supply chains make individual plans, because the real demand information is not available throughout the chain. The current systems and processes of the supply chains are not designed to meet the requirements now placed upon them. For long term relationships with suppliers and customers, an integrated decision-making process is needed in order to obtain a satisfactory result for all parties. Especially when customized production and short lead-time is in focus. An effective value chain makes inventory available and visible among the value chain members, minimizes response time and optimizes total inventory value held throughout the chain. In this paper a supply chain planning classification grid is presented based current manufacturing classifications and supply chain planning initiatives.

  17. Independent sets in chain cacti

    CERN Document Server

    Sedlar, Jelena

    2011-01-01

    In this paper chain cacti are considered. First, for two specific classes of chain cacti (orto-chains and meta-chains of cycles with h vertices) the recurrence relation for independence polynomial is derived. That recurrence relation is then used in deriving explicit expressions for independence number and number of maximum independent sets for such chains. Also, the recurrence relation for total number of independent sets for such graphs is derived. Finaly, the proof is provided that orto-chains and meta-chains are the only extremal chain cacti with respect to total number of independent sets (orto-chains minimal and meta-chains maximal).

  18. Decisive Markov Chains

    CERN Document Server

    Abdulla, Parosh Aziz; Mayr, Richard

    2007-01-01

    We consider qualitative and quantitative verification problems for infinite-state Markov chains. We call a Markov chain decisive w.r.t. a given set of target states F if it almost certainly eventually reaches either F or a state from which F can no longer be reached. While all finite Markov chains are trivially decisive (for every set F), this also holds for many classes of infinite Markov chains. Infinite Markov chains which contain a finite attractor are decisive w.r.t. every set F. In particular, this holds for probabilistic lossy channel systems (PLCS). Furthermore, all globally coarse Markov chains are decisive. This class includes probabilistic vector addition systems (PVASS) and probabilistic noisy Turing machines (PNTM). We consider both safety and liveness problems for decisive Markov chains, i.e., the probabilities that a given set of states F is eventually reached or reached infinitely often, respectively. 1. We express the qualitative problems in abstract terms for decisive Markov chains, and show...

  19. Fields From Markov Chains

    DEFF Research Database (Denmark)

    Justesen, Jørn

    2005-01-01

    A simple construction of two-dimensional (2-D) fields is presented. Rows and columns are outcomes of the same Markov chain. The entropy can be calculated explicitly.......A simple construction of two-dimensional (2-D) fields is presented. Rows and columns are outcomes of the same Markov chain. The entropy can be calculated explicitly....

  20. REVERSE SUPPLY CHAIN

    Directory of Open Access Journals (Sweden)

    Tomasz DOMAGAŁA

    2013-10-01

    Full Text Available The paper focuses on the presentation of the reverse supply chain, of which the role in the modern business grows along with the increasing number of environmental regulations and possibilities of reducing an operating cost. The paper also describes main problems in developing the profitable chain and possibilities to take an action in order to overcome them.

  1. Value Chain Engineering

    DEFF Research Database (Denmark)

    Wæhrens, Brian Vejrum; Slepniov, Dmitrij

    2015-01-01

    This workbook is recommended for the attention of students of and managers in Danish small and medium sized enterprises (SMEs). Danish SMEs are currently facing a number of key challenges related to their position in global value chains. This book provides an insight into value chain management...

  2. Supply Chain Management

    DEFF Research Database (Denmark)

    Wieland, Andreas; Handfield, Robert B.

    Supply chain management has made great strides in becoming a discipline with a standalone body of theories. As part of this evolution, researchers have sought to embed and integrate observed supply chain management phenomena into theoretical statements. In our review, we explore where we have been...

  3. Supply Chain Connectivity: Enhancing Participation in the Global Supply Chain

    OpenAIRE

    Epictetus E. Patalinghug

    2015-01-01

    Supply chain connectivity is vital for the efficient flow of trade among APEC economies. This paper reviews the literature and supply chain management, describes the barriers to enhancing participation in global supply chain, analyzes the various measures of supply chain performance, and suggests steps for the Philippines to fully reap the benefits of the global value chain.

  4. Project Decision Chain

    DEFF Research Database (Denmark)

    Rolstadås, Asbjørn; Pinto, Jeffrey K.; Falster, Peter

    2015-01-01

    To add value to project performance and help obtain project success, a new framework for decision making in projects is defined. It introduces the project decision chain inspired by the supply chain thinking in the manufacturing sector and uses three types of decisions: authorization, selection......, and plan decision. A primitive decision element is defined where all the three decision types can be accommodated. Each task in the primitive element can in itself contain subtasks that in turn will comprise new primitive elements. The primitive elements are nested together in a project decision chain....

  5. Plastic value chains

    DEFF Research Database (Denmark)

    Baxter, John; Wahlstrom, Margareta; Zu Castell-Rüdenhausen, Malin

    2014-01-01

    Optimizing plastic value chains is regarded as an important measure in order to increase recycling of plastics in an efficient way. This can also lead to improved awareness of the hazardous substances contained in plastic waste, and how to avoid that these substances are recycled. As an example......, plastics from WEEE is chosen as a Nordic case study. The project aims to propose a number of improvements for this value chain together with representatives from Nordic stakeholders. Based on the experiences made, a guide for other plastic value chains shall be developed....

  6. Supply chain risk management

    Directory of Open Access Journals (Sweden)

    Christian Hollstein

    2013-03-01

    Full Text Available Background: Supply chain risk management increasingly gains prominence in many international industries. In order to strengthen supply chain structures, processes, and networks, adequate potentials for risk management need to be built (focus on effective logistics and to be utilized (focus on efficient logistics. Natural-based disasters, such as the case of Fukushima, illustrate how crucial risk management is. Method: By aligning a theoretical-conceptual framework with empirical-inductive findings, it may be hypothesized that logistical systems do have a positive effect on supply chain risk management activities.  Result/conclusion:  Flexibility and capacity, as well as redundancy and standardization, are often viewed as being conflictionary. It shows, however, that in the light of supply chain risk management, those factors may yield a common benefit if proper logistics systems are applied.  

  7. Editorial: Supply Chain Management

    Directory of Open Access Journals (Sweden)

    Aidonis, D.

    2012-01-01

    Full Text Available This special issue has followed up the 2nd Olympus International Conference on Supply Chains held on October 5-6, 2012, in Katerini, Greece. The Conference was organized by the Department of Logistics of Alexander Technological Educational Institution (ATEI of Thessaloniki, in collaboration with the Laboratory of Quantitative Analysis, Logistics and Supply Chain Management of the Department of Mechanical Engineering, Aristotle University of Thessaloniki (AUTH. During the 2-Days Conference more than 50 research papers were presented covering the following thematic areas: (i Business Logistics, (ii Transportation, Telematics and Distribution Networks, (iii Green Logistics, (iv Information and Communication Technologies in Supply Chain Management, and (v Services and Quality. Three keynote invited speakers addressed interesting issues for the Humanitarian Logistics, Green Supply Chains of the Agrifood Sector and the Opportunities and Prospects of Greek Ports chaired Round Tables with other Greek and Foreign Scientists and Specialists.

  8. Moldova - Value Chain Training

    Data.gov (United States)

    Millennium Challenge Corporation — The evaluation of the GHS value chain training subactivity wwas designed to measure the extent, if any, to which the training activities improved the productivity...

  9. Light chain nephropathy

    Directory of Open Access Journals (Sweden)

    Sihem Darouich

    2015-01-01

    Full Text Available Light chain deposition disease (LCDD is characterized by the tissue deposition of monotypic immunoglobulin light chains of either kappa or lambda isotype. It is the archetypal systemic disease that is most frequently diagnosed on a kidney biopsy, although the deposits may involve several other organs. This brief review focuses on the clinicopathological features of LCDD-associated nephropathy with an emphasis on the diagnostic and therapeutic difficulties related to this elusive condition.

  10. Supply Chain Interoperability Measurement

    Science.gov (United States)

    2015-06-19

    Base, Ohio DISTRIBUTION STATEMENT A. APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED. The views expressed in this thesis ...chain connections are often hindered by inconsistent vocabularies , terms, ontologies, and semantics utilized by various supply chain members (Ye et...eg.COOPERATION PROCESS)-Don’t address synergies between SC X X X X X X X X Don’t track effectiveness over time-lack of learning by experience Loss of SC

  11. Supply chain quality management

    OpenAIRE

    Hannan Amoozad Mahdiraji; Meysam Arabzadeh; Reza Ghaffari

    2012-01-01

    In recent years, there are several methods introduced for the improvement of operational performances. Total quality management and supply chain management are two methods recommended for this purpose. These two approaches have been studied in most researches separately, while they have objectives in common, and this makes them a strategic means, which can be used, simultaneously. Total quality management and supply chain management play significant roles to increase the organizational compet...

  12. Innovation Across the Supply Chain

    DEFF Research Database (Denmark)

    Druehl, Cheryl; Carrillo, Janice; Hsuan, Juliana

    Innovation is an integral part of every firm’s ongoing operations. Beyond product innovation, supply chain innovations offer a unique source of competitive advantage. We synthesize recent research on innovation in the supply chain, specifically, innovative supply chain processes...

  13. MASTERING SUPPLY CHAIN RISKS

    Directory of Open Access Journals (Sweden)

    Borut Jereb

    2012-11-01

    Full Text Available Risks in supply chains represent one of the major business issues today. Since every organizationstrives for success and uninterrupted operations, efficient supply chain risk management is crucial.During supply chain risk research at the Faculty of Logistics in Maribor (Slovenia some keyissues in the field were identified, the major being the lack of instruments which can make riskmanagement in an organization easier and more efficient. Consequently, a model which captures anddescribes risks in an organization and its supply chain was developed. It is in accordance with thegeneral risk management and supply chain security standards, the ISO 31000 and ISO 28000families. It also incorporates recent finding from the risk management field, especially from theviewpoint of segmenting of the public.The model described in this paper focuses on the risks itself by defining them by different keydimensions, so that risk management is simplified and can be undertaken in every supply chain andorganizations within them. Based on our mode and consequent practical research in actualorganizations, a freely accessible risk catalog has been assembled and published online from the risksthat have been identified so far. This catalog can serve as a checklist and a starting point in supplychain risk management in organizations. It also incorporates experts from the field into a community,in order to assemble an ever growing list of possible risks and to provide insight into the model andits value in practice.

  14. Issues on Supply Chain Management

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Although supply chain is regarded as an integrated pr ocess, actually, researchers and practitioners have primarily investigated the v arious processes of the supply chain individually. The competitive field in most markets requires well-designed integrated supply chain instead of individual o perations. In this paper, some traditional thinking of supply chain is given fir st, then SCM (Supply Chain Management) is introduced, which views the entire sup ply chain as a whole rather than individual process a...

  15. Phasic Triplet Markov Chains.

    Science.gov (United States)

    El Yazid Boudaren, Mohamed; Monfrini, Emmanuel; Pieczynski, Wojciech; Aïssani, Amar

    2014-11-01

    Hidden Markov chains have been shown to be inadequate for data modeling under some complex conditions. In this work, we address the problem of statistical modeling of phenomena involving two heterogeneous system states. Such phenomena may arise in biology or communications, among other fields. Namely, we consider that a sequence of meaningful words is to be searched within a whole observation that also contains arbitrary one-by-one symbols. Moreover, a word may be interrupted at some site to be carried on later. Applying plain hidden Markov chains to such data, while ignoring their specificity, yields unsatisfactory results. The Phasic triplet Markov chain, proposed in this paper, overcomes this difficulty by means of an auxiliary underlying process in accordance with the triplet Markov chains theory. Related Bayesian restoration techniques and parameters estimation procedures according to the new model are then described. Finally, to assess the performance of the proposed model against the conventional hidden Markov chain model, experiments are conducted on synthetic and real data.

  16. Spatial Data Supply Chains

    Science.gov (United States)

    Varadharajulu, P.; Azeem Saqiq, M.; Yu, F.; McMeekin, D. A.; West, G.; Arnold, L.; Moncrieff, S.

    2015-06-01

    This paper describes current research into the supply of spatial data to the end user in as close to real time as possible via the World Wide Web. The Spatial Data Infrastructure paradigm has been discussed since the early 1990s. The concept has evolved significantly since then but has almost always examined data from the perspective of the supplier. It has been a supplier driven focus rather than a user driven focus. The current research being conducted is making a paradigm shift and looking at the supply of spatial data as a supply chain, similar to a manufacturing supply chain in which users play a significant part. A comprehensive consultation process took place within Australia and New Zealand incorporating a large number of stakeholders. Three research projects that have arisen from this consultation process are examining Spatial Data Supply Chains within Australia and New Zealand and are discussed within this paper.

  17. Environmental Retail Supply Chains

    DEFF Research Database (Denmark)

    Kotzab, Herbert; Munch, Hilde; de Faultrier, Birgitte;

    2011-01-01

    Purpose – The purpose of this paper is to develop a scale that evaluates the environmental elements in retail supply chains and to examine the environmental supply chain management initiatives of the world's largest 100 retailing companies. Design/methodology/approach – The empirical evaluation has...... short-term oriented (green operations). Long-term oriented green design initiatives were hardly observed. Furthermore, the specific environmental activities of three retailers from Denmark, France and the UK were compared. Research limitations/implications – The empirical study investigates supply chain...... operations of retailers and excludes other areas of retail management. The results are based on material that is published by the respective companies and thus do not include internal reports. Originality/value – The main contribution of this paper is to test the proposition that global retailers follow...

  18. Fuzzy Markov chains: uncertain probabilities

    OpenAIRE

    2002-01-01

    We consider finite Markov chains where there are uncertainties in some of the transition probabilities. These uncertainties are modeled by fuzzy numbers. Using a restricted fuzzy matrix multiplication we investigate the properties of regular, and absorbing, fuzzy Markov chains and show that the basic properties of these classical Markov chains generalize to fuzzy Markov chains.

  19. Essentials of supply chain management

    CERN Document Server

    Hugos, Michael H

    2011-01-01

    The latest thinking, strategies, developments, and technologies to stay current in supply chain management Presenting the core concepts and techniques of supply chain management in a clear, concise and easily readable style, the Third Edition of Essentials of Supply Chain Management outlines the most crucial tenets and concepts of supply chain management.

  20. Supply-Chain Optimization Template

    Science.gov (United States)

    Quiett, William F.; Sealing, Scott L.

    2009-01-01

    The Supply-Chain Optimization Template (SCOT) is an instructional guide for identifying, evaluating, and optimizing (including re-engineering) aerospace- oriented supply chains. The SCOT was derived from the Supply Chain Council s Supply-Chain Operations Reference (SCC SCOR) Model, which is more generic and more oriented toward achieving a competitive advantage in business.

  1. Electron Transfer Chain Catalysis

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Electron-transfer chain (ETC) catalysis belongs to the family of chain reactions where the electron is the catalyst. The ETC mechanism could be initiated by chemical activation, electrochemistry, or photolysis. If this pathway is applied to the preparation of organometallic complexes, it utilizes the greatly enhanced reactivity of organometallic 17e and 19e radicals. The chemical propagation is followed by the cross electron-transfer while the electron-transfer step is also followed by the chemical propagation, creating a loop in which reactants are facilely transformed into products. Interestingly the overall reaction is without any net redox change.

  2. Electron Transfer Chain Catalysis

    Institute of Scientific and Technical Information of China (English)

    LIU; LingKang

    2001-01-01

    Electron-transfer chain (ETC) catalysis belongs to the family of chain reactions where the electron is the catalyst. The ETC mechanism could be initiated by chemical activation, electrochemistry, or photolysis. If this pathway is applied to the preparation of organometallic complexes, it utilizes the greatly enhanced reactivity of organometallic 17e and 19e radicals. The chemical propagation is followed by the cross electron-transfer while the electron-transfer step is also followed by the chemical propagation, creating a loop in which reactants are facilely transformed into products. Interestingly the overall reaction is without any net redox change.  ……

  3. METRODOS: Meteorological preprocessor chain

    DEFF Research Database (Denmark)

    Astrup, P.; Mikkelsen, T.; Deme, S.

    2001-01-01

    The METRODOS meteorological preprocessor chain combines measured tower data and coarse grid numerical weather prediction (NWP) data with local scale flow models and similarity scaling to give high resolution approximations of the meteorological situation. Based on available wind velocity...... - heat flux related measurement, e.g. a temperature gradient, are used to give local values of friction velocity and Monin-Obukhov length plus an estimate of the mixing height. The METRODOS meteorological preprocessor chain is an integral part of the RODOS - Real Time On Line Decision Support - program...

  4. Modelling the coal chain

    Energy Technology Data Exchange (ETDEWEB)

    Gertenbach, J.-D.; Varendorff, R. von [Knowledge Based Engineering, Sandton (South Africa)

    1999-03-01

    Managing the supply chain in an integrated coal operation involves many operation and control options often too complex for the human mind to comprehend and react to. By integrating all the knowledge of a supply chain into an expert system, both off-line and on-line real time decisions are possible. Knowledge Based Engineering based in South Africa, has gained valuable experience in modelling such mining operations. The article discusses the methodologies that the company has implemented. KBE uses Gensym`s G2 Real Time Expert System as the foundation of the system and the knowledge base is developed modularly.

  5. Integrated supply chain risk management

    Directory of Open Access Journals (Sweden)

    Riaan Bredell

    2007-11-01

    Full Text Available Integrated supply chain risk management (ISCRM has become indispensable to the theory and practice of supply chain management. The economic and political realities of the modern world require not only a different approach to supply chain management, but also bold steps to secure supply chain performance and sustainable wealth creation. Integrated supply chain risk management provides supply chain organisations with a level of insight into their supply chains yet to be achieved. If correctly applied, this process may optimise management decision-making and assist in the protection and enhancement of shareholder value.

  6. Independent sets in chain cacti

    OpenAIRE

    Sedlar, Jelena

    2011-01-01

    In this paper chain cacti are considered. First, for two specific classes of chain cacti (orto-chains and meta-chains of cycles with h vertices) the recurrence relation for independence polynomial is derived. That recurrence relation is then used in deriving explicit expressions for independence number and number of maximum independent sets for such chains. Also, the recurrence relation for total number of independent sets for such graphs is derived. Finaly, the proof is provided that orto-ch...

  7. Standard handbook of chains chains for power transmission and material handling

    CERN Document Server

    Chain Association, American

    2005-01-01

    A BRIEF HISTORY OF THE DEVELOPMENT OF CHAINEarly DevelopmentsCog ChainCast Detachable ChainCast Pintle ChainPrecision Roller ChainEngineering Steel ChainSilent ChainFlat-Top ChainTerminologyA CHAIN OVERVIEW: USES AND ADVANTAGESGeneralTypes of ChainScope of Chains CoveredStyles and Forms of ChainsStraight and Offset Link ChainsChains With and Without RollersUses of ChainStandard Chains and Their UsesThe Advantages of Chains in ApplicationsAdvantages of Roller Chains in DrivesAdvantages of Silent Chain Drives

  8. Development Value Chains meet Business Supply Chains : The concept of Global Value Chains unraveled

    NARCIS (Netherlands)

    S. Drost (Sarah); J.C.A.C. van Wijk (Jeroen); S. Vellema (Sietze)

    2011-01-01

    textabstractValue chain promotion is considered a key element of private sector development strategies and pro-poor growth. However, (value) chain concepts are rather complex and unclear. This paper unravels the concept of global value chains and studies the diversity of key value chain-related (sup

  9. Nodal-chain metals

    Science.gov (United States)

    Bzdušek, Tomáš; Wu, Quansheng; Rüegg, Andreas; Sigrist, Manfred; Soluyanov, Alexey A.

    2016-10-01

    The band theory of solids is arguably the most successful theory of condensed-matter physics, providing a description of the electronic energy levels in various materials. Electronic wavefunctions obtained from the band theory enable a topological characterization of metals for which the electronic spectrum may host robust, topologically protected, fermionic quasiparticles. Many of these quasiparticles are analogues of the elementary particles of the Standard Model, but others do not have a counterpart in relativistic high-energy theories. A complete list of possible quasiparticles in solids is lacking, even in the non-interacting case. Here we describe the possible existence of a hitherto unrecognized type of fermionic excitation in metals. This excitation forms a nodal chain—a chain of connected loops in momentum space—along which conduction and valence bands touch. We prove that the nodal chain is topologically distinct from previously reported excitations. We discuss the symmetry requirements for the appearance of this excitation and predict that it is realized in an existing material, iridium tetrafluoride (IrF4), as well as in other compounds of this class of materials. Using IrF4 as an example, we provide a discussion of the topological surface states associated with the nodal chain. We argue that the presence of the nodal-chain fermions will result in anomalous magnetotransport properties, distinct from those of materials exhibiting previously known excitations.

  10. CHAINE DES ROTISSEUR @ HILTON

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The annual gala dinner of Chaine des Rotisseurs was hosted by Hilton Beijing. The “Ballet Dinner” - a great creation for both art and fine dining lovers was taken place in varies places within the hotel, including hotel lobby, 3rd floor and lobby lounge.

  11. Exploration Supply Chain Simulation

    Science.gov (United States)

    2008-01-01

    The Exploration Supply Chain Simulation project was chartered by the NASA Exploration Systems Mission Directorate to develop a software tool, with proper data, to quantitatively analyze supply chains for future program planning. This tool is a discrete-event simulation that uses the basic supply chain concepts of planning, sourcing, making, delivering, and returning. This supply chain perspective is combined with other discrete or continuous simulation factors. Discrete resource events (such as launch or delivery reviews) are represented as organizational functional units. Continuous resources (such as civil service or contractor program functions) are defined as enabling functional units. Concepts of fixed and variable costs are included in the model to allow the discrete events to interact with cost calculations. The definition file is intrinsic to the model, but a blank start can be initiated at any time. The current definition file is an Orion Ares I crew launch vehicle. Parameters stretch from Kennedy Space Center across and into other program entities (Michaud Assembly Facility, Aliant Techsystems, Stennis Space Center, Johnson Space Center, etc.) though these will only gain detail as the file continues to evolve. The Orion Ares I file definition in the tool continues to evolve, and analysis from this tool is expected in 2008. This is the first application of such business-driven modeling to a NASA/government-- aerospace contractor endeavor.

  12. Innovation in Supply Chains

    DEFF Research Database (Denmark)

    Maier, Maximilian; Korbel, Jakob; Brem, Alexander

    2015-01-01

    . Moreover, along with the fourth industrial revolution – industry 4.0 – new technologies such as cyber physical systems are fast gaining popularity. Hence, based on the analysis of relevant literature, we further develop the supply chain committee model, developed by Kaluza et al. (2003) to demonstrate how...

  13. Supply chain reliability modelling

    Directory of Open Access Journals (Sweden)

    Eugen Zaitsev

    2012-03-01

    Full Text Available Background: Today it is virtually impossible to operate alone on the international level in the logistics business. This promotes the establishment and development of new integrated business entities - logistic operators. However, such cooperation within a supply chain creates also many problems related to the supply chain reliability as well as the optimization of the supplies planning. The aim of this paper was to develop and formulate the mathematical model and algorithms to find the optimum plan of supplies by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Methods: The mathematical model and algorithms to find the optimum plan of supplies were developed and formulated by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Results and conclusions: The problem of ensuring failure-free performance of goods supply channel analyzed in the paper is characteristic of distributed network systems that make active use of business process outsourcing technologies. The complex planning problem occurring in such systems that requires taking into account the consumer's requirements for failure-free performance in terms of supply volumes and correctness can be reduced to a relatively simple linear programming problem through logical analysis of the structures. The sequence of the operations, which should be taken into account during the process of the supply planning with the supplier's functional reliability, was presented.

  14. The design of supply chains

    DEFF Research Database (Denmark)

    Bøge Sørensen, Lars

    2004-01-01

    Keywords Supply Chain Management, Supply Chain Design, Literature studyAbstract Argues stability is a design objective for supply chain design alongside cost, leadtime and responsiveness. Performs an extensive literature study on supply chain design,identifies methods, theories and objectives...... in the existing literature. Describes the conceptexternal specificity and how it's used to design supply chains. Using the concept upstream,archetypes of risk minimal and maximal design are identified. Downstream the conceptdescribes two viable scenarios, one minimizing the impact, the other minimizing...... theprobability of (intended) departure of a supply chain partner. Finally, principles for supplychain design are described and managerial outlined....

  15. Decision-Making for Supply Chain Integration Supply Chain Integration

    CERN Document Server

    Lettice, Fiona; Durowoju, Olatunde

    2012-01-01

    Effective supply chain integration, and the tight co-ordination it creates, is an essential pre-requisite for successful supply chain management.  Decision-Making for Supply Chain Integration is a practical reference on recent research in the area of supply chain integration focusing on distributed decision-making problems. Recent applications of various decision-making tools for integrating supply chains are covered including chapters focusing on: •Supplier selection, pricing strategy and inventory decisions in multi-level supply chains, •RFID-enabled distributed decision-making, •Operational risk issues and time-critical decision-making for sensitive logistics nodes, Modelling end to end processes to improve supply chain integration, and •Integrated systems to improve service delivery and optimize resource use. Decision-Making for Supply Chain Integration provides an insight into the tools and methodologies of this field with support from real-life case studies demonstrating successful application ...

  16. Towards Intelligent Supply Chains

    DEFF Research Database (Denmark)

    Siurdyban, Artur; Møller, Charles

    2012-01-01

    applied to the context of organizational processes can increase the success rate of business operations. The framework is created using a set of theoretical based constructs grounded in a discussion across several streams of research including psychology, pedagogy, artificial intelligence, learning...... of deploying inapt operations leading to deterioration of profits. To address this problem, we propose a unified business process design framework based on the paradigm of intelligence. Intelligence allows humans and human-designed systems cope with environmental volatility, and we argue that its principles......, business process management and supply chain management. It outlines a number of system tasks combined in four integrated management perspectives: build, execute, grow and innovate, put forward as business process design propositions for Intelligent Supply Chains....

  17. Perioperative supply chain management.

    Science.gov (United States)

    Feistritzer, N R; Keck, B R

    2000-09-01

    Faced with declining revenues and increasing operating expenses, hospitals are evaluating numerous mechanisms designed to reduce costs while simultaneously maintaining quality care. Many facilities have targeted initial cost reduction efforts in the reduction of labor expenses. Once labor expenses have been "right sized," facilities have continued to focus on service delivery improvements by the optimization of the "supply chain" process. This report presents a case study of the efforts of Vanderbilt University Medical Center in the redesign of its supply chain management process in the department of Perioperative Services. Utilizing a multidisciplinary project management structure, 3 work teams were established to complete the redesign process. To date, the project has reduced costs by $2.3 million and enhanced quality patient care by enhancing the delivery of appropriate clinical supplies during the perioperative experience.

  18. Volumes of chain links

    CERN Document Server

    Kaiser, James; Rollins, Clint

    2011-01-01

    Agol has conjectured that minimally twisted n-chain links are the smallest volume hyperbolic manifolds with n cusps, for n at most 10. In his thesis, Venzke mentions that these cannot be smallest volume for n at least 11, but does not provide a proof. In this paper, we give a proof of Venzke's statement. The proof for n at least 60 is completely rigorous. The proof for n between 11 and 59 uses a computer calculation, and can be made rigorous for manifolds of small enough complexity, using methods of Moser and Milley. Finally, we prove that the n-chain link with 2m or 2m+1 half-twists cannot be the minimal volume hyperbolic manifold with n cusps, provided n is at least 60 or |m| is at least 8, and we give computational data indicating this remains true for smaller n and |m|.

  19. Extended linear chain compounds

    CERN Document Server

    Linear chain substances span a large cross section of contemporary chemistry ranging from covalent polymers, to organic charge transfer com­ plexes to nonstoichiometric transition metal coordination complexes. Their commonality, which coalesced intense interest in the theoretical and exper­ imental solid state physics/chemistry communities, was based on the obser­ vation that these inorganic and organic polymeric substrates exhibit striking metal-like electrical and optical properties. Exploitation and extension of these systems has led to the systematic study of both the chemistry and physics of highly and poorly conducting linear chain substances. To gain a salient understanding of these complex materials rich in anomalous aniso­ tropic electrical, optical, magnetic, and mechanical properties, the conver­ gence of diverse skills and talents was required. The constructive blending of traditionally segregated disciplines such as synthetic and physical organic, inorganic, and polymer chemistry, crystallog...

  20. The innovation value chain.

    Science.gov (United States)

    Hansen, Morten T; Birkinshaw, Julian

    2007-06-01

    The challenges of coming up with fresh ideas and realizing profits from them are different for every company. One firm may excel at finding good ideas but may have weak systems for bringing them to market. Another organization may have a terrific process for funding and rolling out new products and services but a shortage of concepts to develop. In this article, Hansen and Birkinshaw caution executives against using the latest and greatest innovation approaches and tools without understanding the unique deficiencies in their companies' innovation systems. They offer a framework for evaluating innovation performance: the innovation value chain. It comprises the three main phases of innovation (idea generation, conversion, and diffusion) as well as the critical activities performed during those phases (looking for ideas inside your unit; looking for them in other units; looking for them externally; selecting ideas; funding them; and promoting and spreading ideas companywide). Using this framework, managers get an end-to-end view of their innovation efforts. They can pinpoint their weakest links and tailor innovation best practices appropriately to strengthen those links. Companies typically succumb to one of three broad "weakest-link" scenarios. They are idea poor, conversion poor, or diffusion poor. The article looks at the ways smart companies - including Intuit, P&G, Sara Lee, Shell, and Siemens- modify the best innovation practices and apply them to address those organizations' individual needs and flaws. The authors warn that adopting the chain-based view of innovation requires new measures of what can be delivered by each link in the chain. The approach also entails new roles for employees "external scouts" and "internal evangelists," for example. Indeed, in their search for new hires, companies should seek out those candidates who can help address particular weaknesses in the innovation value chain.

  1. Monitoring Global Supply Chains

    OpenAIRE

    2014-01-01

    Firms reliant on supply chains to manufacture their goods risk reputational harm if the working conditions in those factories are revealed to be dangerous, illegal, or otherwise problematic. While firms are increasingly relying on private-sector "social auditors" to assess factory conditions, little had been known about the accuracy of those assessments. We analyzed nearly 17,000 code-of-conduct audits conducted at nearly 6,000 suppliers around the world. We found that audits yield fewer viol...

  2. Port supply chain integration : analyzing biofuel supply chains

    NARCIS (Netherlands)

    Stevens, Leonie C. E.; Vis, Iris F. A.

    2016-01-01

    This paper focuses on port supply chain integration to strengthen operational and business performance. We provide a structured and comprehensive method to enable port supply chain integration and demonstrate its applicability to the biofuel supply chain. We define the value proposition, role, activ

  3. Adjustable chain trees for proteins

    DEFF Research Database (Denmark)

    Winter, Pawel; Fonseca, Rasmus

    2012-01-01

    A chain tree is a data structure for changing protein conformations. It enables very fast detection of clashes and free energy potential calculations. A modified version of chain trees that adjust themselves to the changing conformations of folding proteins is introduced. This results in much...... tighter bounding volume hierarchies and therefore fewer intersection checks. Computational results indicate that the efficiency of the adjustable chain trees is significantly improved compared to the traditional chain trees....

  4. Supply chain dynamics in Asia

    OpenAIRE

    Banomyong, Ruth

    2010-01-01

    Supply chain management in Asia is a relatively novel topic but a key challenge for all Asian based manufacturers and traders when trying to integrate into the "global market". The purpose of the paper is to describe key supply chain issues faced in Asia. These issues are related to supply chain security that forces Asian firms to comply with numerous requirements as well as the importance of a properly managed supply chain in enhancing firms' competitiveness. The critical role played by Asia...

  5. Requirements of supply chain management in differentiating European pork chains.

    Science.gov (United States)

    Trienekens, Jacques; Wognum, Nel

    2013-11-01

    This paper summarizes results obtained by research into pork chain management in the EU Integrated Project Q-Porkchains. Changing demands for intrinsic and extrinsic quality attributes of pork products impact the way supply chain management should be organized from the farmer down to the consumer. The paper shows the importance of Quality Management Systems for integrating supply chains and enhancing consumer confidence. The paper also presents innovations in information system integration for aligning information exchange in the supply chain and logistics concepts based on innovative measurement technologies at the slaughterhouse stage. In the final section research challenges towards sustainable pork supply chains satisfying current consumer demands are presented.

  6. On chains of centered valuations

    Directory of Open Access Journals (Sweden)

    Rachid Chibloun

    2003-01-01

    Full Text Available We study chains of centered valuations of a domain A and chains of centered valuations of A [X1,…,Xn] corresponding to valuations of A. Finally, we make some applications to chains of valuations centered on the same ideal of A [X1,…,Xn] and extending the same valuation of A.

  7. Designing structural supply chain flexibility

    NARCIS (Netherlands)

    Mulinski, Ksawery Jan

    2012-01-01

    In a continuously changing business environment the role of supply chain flexibility is constantly increasing. A flexible supply chain can ensure survival in quickly changing market conditions as well as enable sustainable growth. This thesis explores the topic of supply chain flexibility with focus

  8. Radiology's value chain.

    Science.gov (United States)

    Enzmann, Dieter R

    2012-04-01

    A diagnostic radiology value chain is constructed to define its main components, all of which are vulnerable to change, because digitization has caused disaggregation of the chain. Some components afford opportunities to improve productivity, some add value, while some face outsourcing to lower labor cost and to information technology substitutes, raising commoditization risks. Digital image information, because it can be competitive at smaller economies of scale, allows faster, differential rates of technological innovation of components, initiating a centralization-to-decentralization technology trend. Digitization, having triggered disaggregation of radiology's professional service model, may soon usher in an information business model. This means moving from a mind-set of "reading images" to an orientation of creating and organizing information for greater accuracy, faster speed, and lower cost in medical decision making. Information businesses view value chain investments differently than do small professional services. In the former model, producing a better business product will extend image interpretation beyond a radiologist's personal fund of knowledge to encompass expanding external imaging databases. A follow-on expansion with integration of image and molecular information into a report will offer new value in medical decision making. Improved interpretation plus new integration will enrich and diversify radiology's key service products, the report and consultation. A more robust, information-rich report derived from a "systems" and "computational" radiology approach will be facilitated by a transition from a professional service to an information business. Under health care reform, radiology will transition its emphasis from volume to greater value. Radiology's future brightens with the adoption of a philosophy of offering information rather than "reads" for decision making. Staunchly defending the status quo via turf wars is unlikely to constitute a

  9. Supply Chain Costing

    DEFF Research Database (Denmark)

    Asmussen, Jesper Normann; Kristensen, Jesper; Wæhrens, Brian Vejrum

    2016-01-01

    Based Costing (ABC) på et forsyningskædeniveau – heri benævnt Supply Chain Costing (SCC). Udoverdefordelederfindesved ABCtilføjerSCCogså et økonomisk grundlag til det strategiske rationale, der ofte ligger bag opbygningen af virksomhedens forsyningskæde, og kan dermed medvirke til konkret....... Virksomhedens evne til at udarbejde relevantinformation fremstår derfor som en vigtig parameter, såfremt virksomheden skal forblive konkurrencedygtig i en stadig mere kompleks verden, hvor udviklingen foregår stadig hurtigere. Denne arbejdsboggiverindsigtidemuligheder,der eksisterer ved at anvende Activity...

  10. [Trophic chains in soil].

    Science.gov (United States)

    Goncharov, A A; Tiunov, A V

    2013-01-01

    Trophic links of soil animals are extensively diverse but also flexible. Moreover, feeding activity of large soil saprotrophs often cascades into a range of ecosystem-level consequences via the ecological engineering. Better knowledge on the main sources of energy utilized by soil animals is needed for understanding functional structure of soil animal communities and their participation in the global carbon cycling. Using published and original data, we consider the relative importance of dead organic matter and saprotrophic microorganisms as a basal energy source in the detritus-based food chains, the feeding of endogeic macrofauna on the stabilized soil organic matter, and the role of recent photosynthate in the energy budget of soil communities. Soil food webs are spatially and functionally compartmentalized, though the separation of food chains into bacteria- and fungi-based channels seems to be an over-simplification. The regulation of the litter decomposition rates via top-down trophic interactions across more than one trophic level is only partly supported by experimental data, but mobile litter-dwelling predators play a crucial role in integrating local food webs within and across neighboring ecosystems.

  11. Polyketide chain length control by chain length factor.

    Science.gov (United States)

    Tang, Yi; Tsai, Shiou-Chuan; Khosla, Chaitan

    2003-10-22

    Bacterial aromatic polyketides are pharmacologically important natural products. A critical parameter that dictates product structure is the carbon chain length of the polyketide backbone. Systematic manipulation of polyketide chain length represents a major unmet challenge in natural product biosynthesis. Polyketide chain elongation is catalyzed by a heterodimeric ketosynthase. In contrast to homodimeric ketosynthases found in fatty acid synthases, the active site cysteine is absent from the one subunit of this heterodimer. The precise role of this catalytically silent subunit has been debated over the past decade. We demonstrate here that this subunit is the primary determinant of polyketide chain length, thereby validating its designation as chain length factor. Using structure-based mutagenesis, we identified key residues in the chain length factor that could be manipulated to convert an octaketide synthase into a decaketide synthase and vice versa. These results should lead to novel strategies for the engineered biosynthesis of hitherto unidentified polyketide scaffolds.

  12. Information in the supply chain: measuring supply chain performance

    OpenAIRE

    Bytheway, Andrew

    1995-01-01

    Information is one of many factors in the development of supply chain operations. It is a key factor in a number of new initiatives, such as: business process management. partnership development, efficient customer response, tighter integration of supply chain operations and outsourcing of ancillary operations. Improvement of the supply chain takes place at different levels: simple efficiency (the Improvement of existing processes), improved quality of service (the redesign of ...

  13. Doping of Semiconducting Atomic Chains

    Science.gov (United States)

    Toshishige, Yamada; Kutler, Paul (Technical Monitor)

    1997-01-01

    Due to the rapid progress in atom manipulation technology, atomic chain electronics would not be a dream, where foreign atoms are placed on a substrate to form a chain, and its electronic properties are designed by controlling the lattice constant d. It has been shown theoretically that a Si atomic chain is metallic regardless of d and that a Mg atomic chain is semiconducting or insulating with a band gap modified with d. For electronic applications, it is essential to establish a method to dope a semiconducting chain, which is to control the Fermi energy position without altering the original band structure. If we replace some of the chain atoms with dopant atoms randomly, the electrons will see random potential along the chain and will be localized strongly in space (Anderson localization). However, if we replace periodically, although the electrons can spread over the chain, there will generally appear new bands and band gaps reflecting the new periodicity of dopant atoms. This will change the original band structure significantly. In order to overcome this dilemma, we may place a dopant atom beside the chain at every N lattice periods (N > 1). Because of the periodic arrangement of dopant atoms, we can avoid the unwanted Anderson localization. Moreover, since the dopant atoms do not constitute the chain, the overlap interaction between them is minimized, and the band structure modification can be made smallest. Some tight-binding results will be discussed to demonstrate the present idea.

  14. Dynamics of Polymer Chains.

    Science.gov (United States)

    Hong, Tzay-Ming

    A major objective of this research is to establish at a more fundamental level some of the qualitative or semi-quantitative treatments in use at the present time, such as the Doi-Edwards tube picture, the switch from non -ideal to ideal behavior, and dynamical aspects of the reptation model. The main topics are: (I) An attempt was made to determine the order of magnitude of the elastic time interval of a viscoelastic polymer melt, defining it as the reciprocal of the average rate at which the total entanglement (clockwise plus anticlockwise) passes through zero due to thermal agitation. We calculated the case of a free chain winding about a straight rod both in friction-independent regime and in high friction regime. (II) By successively coarse -graining and rescaling the monomer-monomer interaction (using a modified Wilson recursion formula) we found that the interaction is driven to a very strong but short-ranged one. This verifies the observation that polymers in dilute solutions tend to curl up and behave like hard spheres. (III) We studied the case of chemical equilibrium of i-mers with their nucleating monomers and on the basis of a Flory-Huggins -type mean field theory find that in the dilute limit the swelling of the i-mers takes on the traditional N ^{3over5} law only for sufficiently small monomer chemical potential. When that potential is large enough, then, assuming a Flory law of chain propagation, the law seems to become N^{1over3 }. This is distinct from the problem of changeover from dilute to semidilute polymer system, which we also studied by imposing total polymer density as a constraint equation. (IV) Another item examined concerns the form of the space curve that a very long polymer must assume in order to minimize its free energy (we found that a family of helices with a definite functional relation between pitch and radius renders the free energy stationary). Because a chain is a one-dimensional object, this does not mean that helical shapes

  15. Quivers via anomaly chains

    Energy Technology Data Exchange (ETDEWEB)

    Casero, Roberto [Dipartimento di Fisica, Universita di Milano-Bicocca, Piazza della Scienza, 3, 20126 Milan (Italy)]. E-mail: roberto.casero@mib.infn.it; Trincherini, Enrico [Dipartimento di Fisica, Universita di Milano-Bicocca, Piazza della Scienza, 3, 20126 Milan (Italy)

    2003-09-01

    We study quivers in the context of matrix models. We introduce chains of generalized Konishi anomalies to write the quadratic and cubic equations that constrain the resolvents of general affine A-circumflex{sub n-1} and non-affine A{sub n} quiver gauge theories, and give a procedure to calculate all higher-order relations. For these theories we also evaluate, as functions of the resolvents, VEV's of chiral operators with two and four bi-fundamental insertions. As an example of the general procedure we explicitly consider the two simplest quivers A{sub 2} and A-circumflex{sub 1}, obtaining in the first case a cubic algebraic curve, and for the affine theory the same equation as that of U(N) theories with adjoint matter, successfully reproducing the RG cascade result. (author)

  16. Quivers via anomaly chains

    CERN Document Server

    Casero, R; Casero, Roberto; Trincherini, Enrico

    2003-01-01

    We study quivers in the context of matrix models. We introduce chains of generalized Konishi anomalies to write the quadratic and cubic equations that constrain the resolvents of general affine and non-affine quiver gauge theories, and give a procedure to calculate all higher-order relations. For these theories we also evaluate, as functions of the resolvents, VEV's of chiral operators with two and four bifundamental insertions. As an example of the general procedure we explicitly consider the two simplest quivers A2 and A1(affine), obtaining in the first case a cubic algebraic curve, and for the affine theory the same equation as that of U(N) theories with adjoint matter, successfully reproducing the RG cascade result.

  17. NNSA TRITIUM SUPPLY CHAIN

    Energy Technology Data Exchange (ETDEWEB)

    Wyrick, Steven [Savannah River National Laboratory, Aiken, SC, USA; Cordaro, Joseph [Savannah River National Laboratory, Aiken, SC, USA; Founds, Nanette [National Nuclear Security Administration, Albuquerque, NM, USA; Chambellan, Curtis [National Nuclear Security Administration, Albuquerque, NM, USA

    2013-08-21

    Savannah River Site plays a critical role in the Tritium Production Supply Chain for the National Nuclear Security Administration (NNSA). The entire process includes: • Production of Tritium Producing Burnable Absorber Rods (TPBARs) at the Westinghouse WesDyne Nuclear Fuels Plant in Columbia, South Carolina • Production of unobligated Low Enriched Uranium (LEU) at the United States Enrichment Corporation (USEC) in Portsmouth, Ohio • Irradiation of TPBARs with the LEU at the Tennessee Valley Authority (TVA) Watts Bar Reactor • Extraction of tritium from the irradiated TPBARs at the Tritium Extraction Facility (TEF) at Savannah River Site • Processing the tritium at the Savannah River Site, which includes removal of nonhydrogen species and separation of the hydrogen isotopes of protium, deuterium and tritium.

  18. PHONONS IN POLYACENIC CHAINS

    Institute of Scientific and Technical Information of China (English)

    O. Rafil; M. Tamine; B. Bourahla; R. Tigrine; S. Amoudache; A. Khater

    2006-01-01

    We have theoretically resolved phonon excitations in quasi-two-dimensional organic crystals of polyacenic semiconductor material which may be obtained by the pyrolytic treatment of phenol-formaldehyde resin. A model for studying the dynamical properties using three polyacene chains is proposed with the aim to present the vibrational properties of this structure. It employs the formalism of solid states in two dimensions which admit phonons. A simulation process of the two-dimensional lattice structure shows that elastic waves may explain the existence of vibrational modes in the frequency range 100-400 cm-1. The presence of acoustic and optical like phonons is discussed in terms of the elastic force constants. A hyperfine resonance structure is obtained. It allows the analysis of the dynamical evolution in thin films of polyacene. It is found that the behavior of the phonon density of states exhibits resonance between modes in the structure.

  19. Chains, bombs, potrzebies and slugs

    Science.gov (United States)

    Jewess, Mike; McDowell, Alex; Maxfield, Stephen; Hunt, A. G.; Hicks, Bruce

    2010-03-01

    I read with pleasure Robert Crease's article on unusual units (February pp17-19). However, the article stated that an acre is 10×10 chains, when it is in fact 10×1 chains. Incidentally, a distance of 10 chains (220 yards) is known as a furlong, a word that suggests the length of a ploughed furrow and that is still used in horse-racing.

  20. DOS cones along atomic chains

    Science.gov (United States)

    Kwapiński, Tomasz

    2017-03-01

    The electron transport properties of a linear atomic chain are studied theoretically within the tight-binding Hamiltonian and the Green’s function method. Variations of the local density of states (DOS) along the chain are investigated. They are crucial in scanning tunnelling experiments and give important insight into the electron transport mechanism and charge distribution inside chains. It is found that depending on the chain parity the local DOS at the Fermi level can form cone-like structures (DOS cones) along the chain. The general condition for the local DOS oscillations is obtained and the linear behaviour of the local density function is confirmed analytically. DOS cones are characterized by a linear decay towards the chain which is in contrast to the propagation properties of charge density waves, end states and Friedel oscillations in one-dimensional systems. We find that DOS cones can appear due to non-resonant electron transport, the spin–orbit scattering or for chains fabricated on a substrate with localized electrons. It is also shown that for imperfect chains (e.g. with a reduced coupling strength between two neighboring sites) a diamond-like structure of the local DOS along the chain appears.

  1. Risikobasiertes Supply-Chain-Management

    DEFF Research Database (Denmark)

    Wieland, Andreas; Schinz, Philipp

    2015-01-01

    Das Management erlebt seit einigen Jahren dahingehend einen Paradigmenwechsel, dass nicht mehr Unternehmen als einzelne autonome Einheiten im Wettbewerb zueinander stehen, sondern die Supply Chains, in denen diese Unternehmen eingebunden sind. Ursachen hierfür sind beispielsweise die Auslagerung...... von Nicht-Kernprozessen auf vorgelagerte Stufen der Supply Chain oder auf Supply-Chain-Dienstleister sowie die Internationalisierung der Beschaffung. Dieser Paradigmenwechsel hat traditionelles Denken in den Schranken des Systems „Unternehmen“ abgelöst und zum Supply- Chain-Denken geführt, das vor......- und nachgelagerte Stufen des Systems „End-to-End-Supply-Chain“ einbezieht, etwa auch die Lieferanten von Lieferanten....

  2. Social Media and Supply Chain

    Directory of Open Access Journals (Sweden)

    Sonja Markova

    2013-02-01

    Full Text Available Web 2.0, also referred to as social media, is the use of the World Wide Web to increase creativity, information sharing, and collaboration among users. Social media is driving the rethinking of many of the principles of economics. The use of social media within supply chains is lagging behind their usage for other operational functions, however supply chain management is evolving into supply chain management 2.0.The purpose of this article is to provide researches of the supply chain management a reference with the main concepts of social media: social profiles, social applications, brand outposts and communities, and the social ecosystem.

  3. Integrating the healthcare supply chain.

    Science.gov (United States)

    Brennan, C D

    1998-01-01

    Today's integrated delivery systems (IDSs) require efficient supply chain processes to speed products to users at the lowest possible cost. Most excess costs within the supply chain are a result of inefficient and redundant processes involved in the transport and delivery of supplies from suppliers to healthcare providers. By integrating and assuming control of these supply chain processes, improving supply chain management practices, and organizing and implementing a disciplined redesign plan, IDSs can achieve substantial savings and better focus their organizations on their core patient care mission.

  4. Requirements of supply chain management in differentiating European pork chains

    NARCIS (Netherlands)

    Trienekens, J.H.; Wognum, P.M.

    2013-01-01

    This paper summarizes results obtained by research into pork chain management in the EU Integrated Project Q-Porkchains. Changing demands for intrinsic and extrinsic quality attributes of pork products impact the way supply chain management should be organized from the farmer down to the consumer. T

  5. SUPPLY CHAIN STRATEGIES IN THE CONTEXT OF AN E-COMMERCE CHAIN (E-CHAIN

    Directory of Open Access Journals (Sweden)

    João Gilberto Mendes do Reis

    2014-05-01

    Full Text Available This paper purpose to explore the relationships between supply chain strategies and product performance in retail e-commerce. In this case, we concern that in current, in order to bear up under competition, organizations have to manage their supply chains so that they meet the needs of their final customers. With this concept in mind, the research presented in this study focuses on establishing the right strategy for supply chains according to their product segment. Thus, after a Literature Review, the paper explain a methodology based in different authors studies. Finally the article focuses on a pratical case in e-commerce retail that describes its application in this field. The research shows that it is possible to use a methodology for classifying supply chains using chain strategies and product features. The use of the right strategy for supply chains will improve the competitive advantage of businesses. One limitation is that the methodology study focuses on only two e-commerce segment; future studies may go further in refining the proposed framework for other segments. The aim of this research is to offer businesses a model for evaluating supply chains, allowing them to improve the performance of their products and services by using the right strategy for supply chains. The classification proposal of this paper presents an original model for classification of supply chains based on different studies on the theme.

  6. Academic Education Chain Operation Model

    NARCIS (Netherlands)

    Ruskov, Petko; Ruskov, Andrey

    2007-01-01

    This paper presents an approach for modelling the educational processes as a value added chain. It is an attempt to use a business approach to interpret and compile existing business and educational processes towards reference models and suggest an Academic Education Chain Operation Model. The model

  7. Spectral Analysis of Markov Chains

    OpenAIRE

    2007-01-01

    The paper deals with the problem of a statistical analysis of Markov chains connected with the spectral density. We present the expressions for the function of spectral density. These expressions may be used to estimate the parameter of the Markov chain.

  8. LEAN SUPPLY CHAIN DESIGN PRINCIPLES

    OpenAIRE

    Kozlov, Aleksandr

    2015-01-01

    The article presents a set of principles, which can guide the design of lean supply chains. The author divides design principles into 3 main categories. The first two sets describe internal production processes while the 3-rd set relates to the entire supply chain.

  9. Negotiations in Supply Chain Management

    DEFF Research Database (Denmark)

    Zachariassen, Frederik

    2008-01-01

    negotiation literature. Subsequently, an empirical case study is presented, which explicitly aims at exploring the role of negotiations between members of a supply chain. Based on the findings, the paper concludes on specific, normative guidelines for negotiations for improved supply chain competitiveness...

  10. Chain formation of metal atoms

    DEFF Research Database (Denmark)

    Bahn, Sune Rastad; Jacobsen, Karsten Wedel

    2001-01-01

    The possibility of formation of single-atomic chains by manipulation of nanocontacts is studied for a selection of metals (Ni, Pd, Pt, Cu, Ag, Au). Molecular dynamics simulations show that the tendency for chain formation is strongest for Au and Pt. Density functional theory calculations indicate...

  11. Verifying the Hanging Chain Model

    Science.gov (United States)

    Karls, Michael A.

    2013-01-01

    The wave equation with variable tension is a classic partial differential equation that can be used to describe the horizontal displacements of a vertical hanging chain with one end fixed and the other end free to move. Using a web camera and TRACKER software to record displacement data from a vibrating hanging chain, we verify a modified version…

  12. Developing sustainable food supply chains.

    Science.gov (United States)

    Smith, B Gail

    2008-02-27

    This paper reviews the opportunities available for food businesses to encourage consumers to eat healthier and more nutritious diets, to invest in more sustainable manufacturing and distribution systems and to develop procurement systems based on more sustainable forms of agriculture. The important factors in developing more sustainable supply chains are identified as the type of supply chain involved and the individual business attitude to extending responsibility for product quality into social and environmental performance within their own supply chains. Interpersonal trust and working to standards are both important to build more sustainable local and many conserved food supply chains, but inadequate to transform mainstream agriculture and raw material supplies to the manufactured and commodity food markets. Cooperation among food manufacturers, retailers, NGOs, governmental and farmers' organizations is vital in order to raise standards for some supply chains and to enable farmers to adopt more sustainable agricultural practices.

  13. Managing the Global Supply Chain

    DEFF Research Database (Denmark)

    Hsuan, Juliana; Skjøtt-Larsen, Tage; Kinra, Aseem

    edition has been fully updated with recent changes in concepts, technology and practice. Integration and collaboration are keywords in future competition. Firms must be agile and lean at the same time. The book gives an insightful overview of the conceptual foundations of the global supply chain, as......The world today faces global competition. The supply chain is vital part of the globalization process. Presenting a global view of the scope and complexity of supply chain management, this book reflects the rapid change that has taken place within the supply chain and its environment. This new...... well as current examples of best practice of managing supply chains in a global context....

  14. Environmental Management in Product Chains

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Forman, Marianne

    2009-01-01

    ). An overview of examples from our own research and from literature of the type and the role of environmental issues and initiatives in product chains (fourth section). A typology for characterizing corporate strategies as part of environmental management in product chains and characterizing those competencies......The chapter aims at giving background to companies, consultants, governmental regulators, NGOs etc. for the analysis and planning of environmental management in specific product chains through: A framework for understanding environmental management in product chains as shaped by the interaction...... between existing resources, norms and values and external pressures for environmental management (second section). A model for the types of corporate network relations that need to be mapped and understood in order to analyze and/or develop environmental management in a product chain (third section...

  15. The Service-Profit Chain

    DEFF Research Database (Denmark)

    Grønholdt, Lars; Martensen, Anne

    2016-01-01

    evidence of the employee-customer-profit chain. As it is possible to estimate the links, we have demonstrated their effect on company profitability. The research findings provide a better understanding of the service-profit chain and may help practitioners in improving company financial performance.......This paper examines the links between employee attitudes, customer loyalty and company profitability. From a conceptual point of view, this employee-customer-profit chain, also known as the service-profit chain, is well founded and generally accepted. But for many companies, it seems difficult...... to demonstrate such links, and several issues must be addressed to uncover the links. To investigate these links empirically, a hotel chain provided data matching employee and customer measures with measures of profitability. We have successfully employed a modeling approach, and the paper reports empirical...

  16. Managing the Global Supply Chain

    DEFF Research Database (Denmark)

    Skjøtt-Larsen, Tage; Schary, Philip B.; Mikkola, Juliana Hsuan

    The world today faces global competition. The supply chain is vital part of the globalization process. Presenting a global view of the scope and complexity of supply chain management, this book reflects the rapid change that has taken place within the supply chain and its environment. This new...... edition has been fully updated with recent changes in concepts, technology and practice. Integration and collaboration are keywords in future competition. Firms must be agile and lean at the same time. The book gives an insightful overview of the conceptual foundations of the global supply chain, as...... well as current examples of best practice of managing supply chains in a global context....

  17. Elastic Behavior of Polymer Chains

    Institute of Scientific and Technical Information of China (English)

    Teng Lu; Tao Chen; Hao-jun Liang

    2008-01-01

    The elastic behavior of the polymer chain was investigated in a three-dimensional off-lattice model. We sample more than 109 conformations of each kind of polymer chain by using a Monte Carlo algorithm, then analyze them with the non-Gaussian theory of rubberlike elasticity, and end with a statistical study. Through observing the effect of the chain flexibility and the stretching ratio on the mean-square end-to-end distance,the average energy, the average Helmholtz free energy, the elastic force, the contribution of energy to the elastic force, and the entropy contribution to elastic force of the polymer chain, we find that a rigid polymer chain is much easier to stretch than a flexible polymer chain. Also, a rigid polymer chain will become difficult to stretch only at a quite high stretching ratio because of the effect of the entropy contribution.These results of our simulation calculation may explain some of the macroscopic phenomena of polymer and biomacromolecular elasticity.

  18. Traceability in food supply chain:: Towards the synchronised supply chain

    OpenAIRE

    Lindh, Helena; Skjöldebrand, Christina; Olsson, Annika

    2008-01-01

    Today, food products are distributed all over the world. This has led to advantages in terms of availability but disadvantages in terms of more complex food supply chains. Global food competition is intense and therefore actors have started to adapt their mindsets toward a more holistic view and a supply chain perspective. In addition, food scares during recent years have turned focus towards food safety and traceability in a “farm-to-fork” perspective. The aim of this study is to explore...

  19. Markov chains theory and applications

    CERN Document Server

    Sericola, Bruno

    2013-01-01

    Markov chains are a fundamental class of stochastic processes. They are widely used to solve problems in a large number of domains such as operational research, computer science, communication networks and manufacturing systems. The success of Markov chains is mainly due to their simplicity of use, the large number of available theoretical results and the quality of algorithms developed for the numerical evaluation of many metrics of interest.The author presents the theory of both discrete-time and continuous-time homogeneous Markov chains. He carefully examines the explosion phenomenon, the

  20. Markov Chains and Markov Processes

    OpenAIRE

    2016-01-01

    Markov chain, which was named after Andrew Markov is a mathematical system that transfers a state to another state. Many real world systems contain uncertainty. This study helps us to understand the basic idea of a Markov chain and how is been useful in our daily lives. For some times there had been suspense on distinct predictions and future existences. Also in different games there had been different expectations or results involved. That is the reason why we need Markov chains to predict o...

  1. New sensors and processing chain

    CERN Document Server

    Yaakoubi, Nourdin

    2014-01-01

    A vital tool for researchers, engineers, and students, New Sensors and Processing Chain focuses on the processing chain to set up in order to extract relevant information on various systems. Highlighting the design of new microsensors and various applications, the authors present recent progress in instrumentation and microsystem design, providing insight to the modification of the sensor itself as well as its environment. Various applications illustrate the presentations, which show how a processing chain is organized from the data acquired by a specific sensor.

  2. Supply Chain Shipment Pricing Data

    Data.gov (United States)

    US Agency for International Development — This data set provides supply chain health commodity shipment and pricing data. Specifically, the data set identifies Antiretroviral (ARV) and HIV lab shipments to...

  3. Environmental management in product chains

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Forman, Marianne; Hansen, Anne Grethe

    of environmental initiatives, a number of recommendations for governmental regulation, which can support the further diffusion of environmental management in product chains, are developed. Furthermore, the report describes a number of theoretical perspectives from sociology of technology, organisation theory...

  4. Bibliometric Application of Markov Chains.

    Science.gov (United States)

    Pao, Miranda Lee; McCreery, Laurie

    1986-01-01

    A rudimentary description of Markov Chains is presented in order to introduce its use to describe and to predict authors' movements among subareas of the discipline of ethnomusicology. Other possible applications are suggested. (Author)

  5. Gravity Waves from Chain Inflation

    CERN Document Server

    Ashoorioon, Amjad

    2008-01-01

    Chain inflation proceeds through a series of first order phase transitions, which can release considerable gravitational waves (GW). We demonstrate that bubble collisions can leave an observable signature for future high-frequency probes of GWs, such as advanced LIGO, LISA and BBO. A "smoking gun" for chain inflation would be wiggles in the spectrum (and consequently in the tensor spectral index) due to the multiple phase transitions. The spectrum could also be distinguished from a single first order phase transition by a small difference in the amplitude at low frequency. A second origin of GWs in chain inflation are tensor modes from quantum fluctuations; these GW can dominate and be observed on large scales. The consistency relation between scalar and tensor modes is different for chain inflation than for standard rolling models and is testable by Cosmic Microwave Background experiments. If inflation happened through a series of rapid tunnelings in the string landscape, future high frequency probes of GW c...

  6. Markov Chains and Chemical Processes

    Science.gov (United States)

    Miller, P. J.

    1972-01-01

    Views as important the relating of abstract ideas of modern mathematics now being taught in the schools to situations encountered in the sciences. Describes use of matrices and Markov chains to study first-order processes. (Author/DF)

  7. The chain re-action

    CERN Multimedia

    2009-01-01

    On 18 March, beam commissioning started in the first ‘link’ of the accelerator chain – LINAC 2. This marks the start of what will be the longest period of beam operations in CERN’s history, with the accelerator complex remaining operational throughout the winter to supply the LHC. The Bulletin finds out what is being done to make sure the whole chain is ready for this historic run.

  8. "Bullwhip Effect" in Supply Chains

    Directory of Open Access Journals (Sweden)

    Anđelko Ščukanec

    2007-09-01

    Full Text Available The system which connects all the elements between theproducer and the consumer is called the supply chain. This definitionof the supply chain shows its complexity, dynamics anduncertainty. Successful operation of supply chains requires thebest possible coordination of its elements, which obviously indicatesthe utmost importance of the information flow alongthem. The operation of supply chains on the whole has to bemore successful than the operation of their individual elements.It should be noted that such a complex process may give rise toa series of problems, unwanted events, as well as substantial reductionin profits and the level of service. One of such unwantedphenomena which may occur in the supply chain is the"bullwhip effect". This is a possible increase in the diversity oforders which occurs when we move along the elements of thesupply chain (from the customers' orders to the producers' orders.The work analyses the processes within the supply chainsand the occurrence of the bullwhip effect. The main causes ofthe bullwhip effect that we encounter daily in the supply chainshave been clearly defined. The paper also presents the mainnegative consequences of such a disturbance within the supplychains, and provides possible solutions for avoiding the bullwhipeffect.

  9. Reinforcement learning in supply chains.

    Science.gov (United States)

    Valluri, Annapurna; North, Michael J; Macal, Charles M

    2009-10-01

    Effective management of supply chains creates value and can strategically position companies. In practice, human beings have been found to be both surprisingly successful and disappointingly inept at managing supply chains. The related fields of cognitive psychology and artificial intelligence have postulated a variety of potential mechanisms to explain this behavior. One of the leading candidates is reinforcement learning. This paper applies agent-based modeling to investigate the comparative behavioral consequences of three simple reinforcement learning algorithms in a multi-stage supply chain. For the first time, our findings show that the specific algorithm that is employed can have dramatic effects on the results obtained. Reinforcement learning is found to be valuable in multi-stage supply chains with several learning agents, as independent agents can learn to coordinate their behavior. However, learning in multi-stage supply chains using these postulated approaches from cognitive psychology and artificial intelligence take extremely long time periods to achieve stability which raises questions about their ability to explain behavior in real supply chains. The fact that it takes thousands of periods for agents to learn in this simple multi-agent setting provides new evidence that real world decision makers are unlikely to be using strict reinforcement learning in practice.

  10. Sports Nutrition Food Industry Chain Development Research

    OpenAIRE

    Jie Yin

    2015-01-01

    Through the study of Henan sports nutrition food industry chain optimization, the study analyses development advantage and competitive advantage of Henan in sports nutrition food industry chain and existing problems and challenges in Henan sports nutrition food industry chain and at the same time introduces the theory of supply chain management to the development of sports nutrition food industry chain, clearly optimizes countermeasures of sports nutrition food industry chain. Pointing out sp...

  11. Demand chain management - The evolution

    Directory of Open Access Journals (Sweden)

    D Ericsson

    2011-06-01

    Full Text Available The concepts of Supply Chain Management (SCM and Demand Chain Management (DCM are among the new and debated topics concerning logistics in the literature. The question considered in this paper is: “Are these concepts needed or will they just add to the confusion?” Lasting business concepts have always evolved in close interaction between business and academia. Different approaches start out in business and they are then, more or less si- multaneously, aligned, integrated, systemised and structured in academia. In this way a terminology (or language is provided that helps in further diffusion of the concepts. There is a lack of consensus on the definition of the concept of SCM. This may be one of the major reasons for the difficulty in advancing the science and measuring the results of implementation in business. Relationships in SCM span from rather loose coalitions to highly structured virtual network integrations. DCM is a highly organised chain in which the key is mutual interdependence and partnership. The purpose is to create a distinctive competence for the chain as a whole that helps to identify and satisfy customer needs and wishes. The classical research concerning vertical marketing systems is very helpful in systemising the rather unstructured discussions in current SCM research. The trend lies in increasing competition between channels rather than between companies, which in turn leads to the creation of channels with a high degree of partnership and mutual interdependence between members. These types of channels are known as organised vertical marketing systems in the classic marketing channel research. The behaviour in these types of channels, as well as the formal and informal structures, roles in the network, power and dependence relations, etc. are well covered topics in the literature. The concept of vertical marketing systems lies behind the definition of demand chains and demand chain management proposed in this paper. A

  12. Tunneling magnetoresistance of silicon chains

    Science.gov (United States)

    Matsuura, Yukihito

    2016-05-01

    The tunneling magnetoresistance (TMR) of a silicon chain sandwiched between nickel electrodes was examined by using first-principles density functional theory. The relative orientation of the magnetization in a parallel-alignment (PA) configuration of two nickel electrodes enhanced the current with a bias less than 0.4 V compared with that in an antiparallel-alignment configuration. Consequently, the silicon chain-nickel electrodes yielded good TMR characteristics. In addition, there was polarized spin current in the PA configuration. The spin polarization of sulfur atoms functioning as a linking bridge between the chain and nickel electrode played an important role in the magnetic effects of the electric current. Moreover, the hybridization of the sulfur 3p orbital and σ-conjugated silicon 3p orbital contributed to increasing the total current.

  13. MODELING SUPPLY CHAIN PERFORMANCE VARIABLES

    Directory of Open Access Journals (Sweden)

    Ashish Agarwal

    2005-01-01

    Full Text Available In order to understand the dynamic behavior of the variables that can play a major role in the performance improvement in a supply chain, a System Dynamics-based model is proposed. The model provides an effective framework for analyzing different variables affecting supply chain performance. Among different variables, a causal relationship among different variables has been identified. Variables emanating from performance measures such as gaps in customer satisfaction, cost minimization, lead-time reduction, service level improvement and quality improvement have been identified as goal-seeking loops. The proposed System Dynamics-based model analyzes the affect of dynamic behavior of variables for a period of 10 years on performance of case supply chain in auto business.

  14. Who Manages Our Supply Chains?

    DEFF Research Database (Denmark)

    Flöthmann, Christoph

    to manage the manifold tasks they face on a daily basis. Unfortunately, as globalization has simultaneously increased the complexity of supply chains and the demand for highly qualified personnel, companies are facing a significant undersupply of talent (Cottrill, 2010). Moreover, organizations appear......While managers in traditional management functions focus on developing strong expertise to become “specialists” in their own discipline, supply chain managers are a different species: They have to combine a cross-functional understanding of various business fields and multi-faceted competencies...... to lack understanding of supply chain personnel and how to support their recruitment, succession planning, and training and development (John, 2015). Surprisingly, at the same time, scientific research on that topic is relatively scarce. In response, the overarching purpose of this paper...

  15. Designing the Reverse Supply Chain

    DEFF Research Database (Denmark)

    Gobbi, Chiara

    2011-01-01

    for the reverse supply chain. Design/methodology/approach – In order to identify the relevance of the Fisher model, the model needs to be recast in terms of PRV, which, in this context, is considered the independent variable in the reverse logistics arena. Products defined as innovative in Fisher's taxonomy......Purpose – The purpose of this paper is to explore the impact of the product residual value (PRV) and the loss of value over time of returned products in the reverse supply chain configuration. It also examines whether or not the distinction of Fisher's functional and innovative products holds...... correspond to disposed products with high residual value, whereas functional products correspond to disposed products with low residual value. Furthermore, the PRV and the speed at which returned products lose their value are considered in order to determine the configuration of the reverse supply chain...

  16. Markov chains and mixing times

    CERN Document Server

    Levin, David A; Wilmer, Elizabeth L

    2009-01-01

    This book is an introduction to the modern approach to the theory of Markov chains. The main goal of this approach is to determine the rate of convergence of a Markov chain to the stationary distribution as a function of the size and geometry of the state space. The authors develop the key tools for estimating convergence times, including coupling, strong stationary times, and spectral methods. Whenever possible, probabilistic methods are emphasized. The book includes many examples and provides brief introductions to some central models of statistical mechanics. Also provided are accounts of r

  17. Quantum crystals and spin chains

    Energy Technology Data Exchange (ETDEWEB)

    Dijkgraaf, Robbert [KdV Institute for Mathematics, University of Amsterdam, Plantage Muidergracht 24, 1018 TV Amsterdam (Netherlands); Institute for Theoretical Physics, University of Amsterdam, Valckenierstraat 65, 1018 XE Amsterdam (Netherlands); Orlando, Domenico [Institut de Physique, Universite de Neuchatel, Rue Breguet 1, CH-2000 Neuchatel (Switzerland); Reffert, Susanne [Institute for Theoretical Physics, University of Amsterdam, Valckenierstraat 65, 1018 XE Amsterdam (Netherlands)], E-mail: sreffert@gmail.com

    2009-04-21

    In this article, we discuss the quantum version of the melting crystal corner in one, two, and three dimensions, generalizing the treatment for the quantum dimer model. Using a mapping to spin chains we find that the two-dimensional case (growth of random partitions) is integrable and leads directly to the Hamiltonian of the Heisenberg XXZ ferromagnet. The three-dimensional case of the melting crystal corner is described in terms of a system of coupled XXZ spin chains. We give a conjecture for its mass gap and analyze the system numerically.

  18. Quantum crystals and spin chains

    Science.gov (United States)

    Dijkgraaf, Robbert; Orlando, Domenico; Reffert, Susanne

    2009-04-01

    In this article, we discuss the quantum version of the melting crystal corner in one, two, and three dimensions, generalizing the treatment for the quantum dimer model. Using a mapping to spin chains we find that the two-dimensional case (growth of random partitions) is integrable and leads directly to the Hamiltonian of the Heisenberg XXZ ferromagnet. The three-dimensional case of the melting crystal corner is described in terms of a system of coupled XXZ spin chains. We give a conjecture for its mass gap and analyze the system numerically.

  19. Thermodynamics of Dipolar Chain Systems

    DEFF Research Database (Denmark)

    R. Armstrong, J.; Zinner, Nikolaj Thomas; V. Fedorov, D.

    2012-01-01

    The thermodynamics of a quantum system of layers containing perpendicularly oriented dipolar molecules is studied within an oscillator approximation for both bosonic and fermionic species. The system is assumed to be built from chains with one molecule in each layer. We consider the effects...... numerically. Our findings indicate that thermodynamic observables, such as the heat capacity, can be used to probe the signatures of the intralayer interaction between chains. This should be relevant for near future experiments on polar molecules with strong dipole moments....

  20. Reseach of Supply Chain Modeling Technology

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The supply chain modeling technology is research. Firstly, the concept of supply chain and supply chain management is introduced. Secondly, enterprise-modeling methods, such as CIM-OSA, GIM-GRAI, PERA and ARIS, are analyzed and compared. The supply chain modeling technology is studied. Then the ARIS-based supply chain modeling method is proposed and the supply chain operation reference model is set up. Finally, the applications of ARIS-based supply chain modeling method in Shanghai Turbine Generator Co. Ltd. (STGC) is described in detail.

  1. Supply chain management and optimization in manufacturing

    CERN Document Server

    Pirim, Harun; Yilbas, Bekir Sami

    2014-01-01

    This book introduces general supply chain terminology particularly for novice readers, state of the art supply chain management and optimization issues and problems in manufacturing. The book provides insights for making supply chain decisions, planning and scheduling through supply chain network. It introduces optimization problems, i.e. transportation of raw materials, products and location, inventory of plants, warehouses and retailers, faced throughout the supply chain network.

  2. Precise low cost chain gears for heliostats

    Science.gov (United States)

    Liedke, Phillip; Lewandowski, Arkadiusz; Pfahl, Andreas; Hölle, Erwin

    2016-05-01

    This work investigates the potential of chain gears as precise and low cost driving systems for rim drive heliostats. After explaining chain gear basics the polygon effect and chain lengthening are investigated. The polygon effect could be measured by a heliostat with chain rim gear and the chain lengthening with an accordant test set up. Two gear stages are scope of this work: a rim gear and an intermediate gear. Dimensioning, pretensioning and designing for both stages are explained.

  3. Social Value Propagation for Supply Chain Formation

    OpenAIRE

    2013-01-01

    Supply Chain Formation is the process of determining the participants in a supply chain, who will exchange what with whom, and the terms of the exchanges. Decentralized supply chain formation appears as a highly intricate task because agents only possess local information, have limited knowledge about the capabilities of other agents, and prefer to preserve privacy. State-of-the-art decentralized supply chain formation approaches can either: (i) #12;find supply chains of high value at the ...

  4. Information system for the supply chain management

    OpenAIRE

    Delia Adriana Marincas

    2008-01-01

    Supply chain management SCM is the integration and management of supply chain organizations and activities through collaboration, effective business processes and high levels of information sharing. The supply chain concept has become a concern due to global competition and increasing customer demand for value. Thus, the information must be available in real time across the supply chain and this can not be achieved without an integrated software system for supply chain management. Supply chai...

  5. OVERVIEW OF CHINESE CHAIN CATERING MARKET

    OpenAIRE

    2012-01-01

    This thesis is a market overview for chain catering business situation in China. Chinese chain catering market is developing rapidly in recent years, it is a business where everybody can become a customer, but the business is highly competitive. The subject of this thesis is to give an overview of the market situation and strategies for market expansion of Chinese chain catering industry. It contains knowledge of chain management and introduction of Chinese chain catering ma...

  6. SUPPLY CHAIN MANAGEMENT – KEY FACTORS

    OpenAIRE

    Magdalena Daniela DINU

    2014-01-01

    This paper exposes Supply Chain Management by its key factors. Briefly, where the Supply Chain Management is treated as strategic part of a company then maintaining both control and influence throughout the entire supply chain are key factors and critical to success. On the other hand, finding the right partner to manage the non-strategic Supply Chains would be another key factor too. To define the most important key factors within Supply Chain Management means a deeply understanding of bot...

  7. Research on Integrated Green Supply Chain Management

    Institute of Scientific and Technical Information of China (English)

    DENG Lei; WANG Xu

    2006-01-01

    On the basis of the analyzing product life cycle and value chain management in green supply chain, integrated green supply chain is put forward and constructed which involve lean production, agile manufacturing and green supply chain. This integrated structure provides an effective method for resolving some questions such as cost, market, environment, etc. in enterprise. A case study is presented at the end of paper to demonstrate how integrated supply chain implemented successfully in enterprise.

  8. Quadratic Variation by Markov Chains

    DEFF Research Database (Denmark)

    Hansen, Peter Reinhard; Horel, Guillaume

    We introduce a novel estimator of the quadratic variation that is based on the the- ory of Markov chains. The estimator is motivated by some general results concerning filtering contaminated semimartingales. Specifically, we show that filtering can in prin- ciple remove the effects of market...

  9. Spin Chains and Gustafson's Integrals

    CERN Document Server

    Derkachov, S E

    2016-01-01

    The Gustafson's integrals are the multidimensional generalization of the classical Mellin--Barnes integrals. We show that some of these integrals arise from relations between matrix elements in the Sklyanin's representation of Separated Variables in the spin chain models. We also present several new integrals.

  10. Concurrent Product & Supply Chain Creation

    DEFF Research Database (Denmark)

    Gubi, Ebbe

    it is a structural premise. We also know that logistics costs generally are estimated 15-20% of total product costs. Accordingly, it stands to reason that a company can reduce costs, and thereby gain an edge on its competitors, by tailoring the supply chain in question to an individual product or product family; i...

  11. Replicator dynamics in value chains

    DEFF Research Database (Denmark)

    Cantner, Uwe; Savin, Ivan; Vannuccini, Simone

    2016-01-01

    dynamics may revert its effect. In these regressive developments of market selection, firms with low fitness expand because of being integrated with highly fit partners, and the other way around; ii) allowing partner's switching within a value chain illustrates that periods of instability in the early...

  12. Maximal right smooth extension chains

    CERN Document Server

    Huang, Yun Bao

    2010-01-01

    If $w=u\\alpha$ for $\\alpha\\in \\Sigma=\\{1,2\\}$ and $u\\in \\Sigma^*$, then $w$ is said to be a \\textit{simple right extension}of $u$ and denoted by $u\\prec w$. Let $k$ be a positive integer and $P^k(\\epsilon)$ denote the set of all $C^\\infty$-words of height $k$. Set $u_{1},\\,u_{2},..., u_{m}\\in P^{k}(\\epsilon)$, if $u_{1}\\prec u_{2}\\prec ...\\prec u_{m}$ and there is no element $v$ of $P^{k}(\\epsilon)$ such that $v\\prec u_{1}\\text{or} u_{m}\\prec v$, then $u_{1}\\prec u_{2}\\prec...\\prec u_{m}$ is said to be a \\textit{maximal right smooth extension (MRSE) chains}of height $k$. In this paper, we show that \\textit{MRSE} chains of height $k$ constitutes a partition of smooth words of height $k$ and give the formula of the number of \\textit{MRSE} chains of height $k$ for each positive integer $k$. Moreover, since there exist the minimal height $h_1$ and maximal height $h_2$ of smooth words of length $n$ for each positive integer $n$, we find that \\textit{MRSE} chains of heights $h_1-1$ and $h_2+1$ are good candidates t...

  13. Towards biotracing in food chains

    DEFF Research Database (Denmark)

    Hoorfar, Jeffrey; Wagner, Martin; Jordan, Kieran

    2011-01-01

    , and 21 cross-disciplinary work packages that cover tracing and tracking of contamination in feed, meat and dairy chains, in addition to accidental and deliberate contamination of bottled water. The BIOTRACER Consortium consists of 46 partners, including Europe's largest food/feed industries, several SMEs...

  14. Supply Chain Simulation : A Survey

    NARCIS (Netherlands)

    Kleijnen, J.P.C.

    2003-01-01

    This paper provides a survey of simulation in supply chain management.It reviews four types of simulation, namely spreadsheet simulation, system dynamics, discreteevent simulation, and business games.Which simulation type should be applied, depends on the type of managerial question to be answered b

  15. Labour in Global Value Chains

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter; Nadvi, Khalid; Chan, Anita

    2012-01-01

    A critical challenge facing developing country producers is to meet international labour standards and codes of conduct in order to engage in global value chains. Evidence of gains for workers from compliance with such standards and codes remains limited and patchy. This article focuses on the gl......A critical challenge facing developing country producers is to meet international labour standards and codes of conduct in order to engage in global value chains. Evidence of gains for workers from compliance with such standards and codes remains limited and patchy. This article focuses...... on the global football industry, a sector dominated by leading global brands that manage dispersed global value chains. It assesses the working conditions for football stitchers engaged in different forms of work organization, factories, stitching centres and home-based settings in Pakistan, India and China...... production contexts that influence work conditions. In doing so, it argues that current debates on the role of labour in global value chains have to go beyond a narrow focus on labour standards and corporate social responsibility compliance and engage with economic, technological and social upgrading...

  16. Supply chain challenges. building relationships.

    Science.gov (United States)

    Beth, Scott; Burt, David N; Copacino, William; Gopal, Chris; Lee, Hau L; Lynch, Robert Porter; Morris, Sandra

    2003-07-01

    Supply chain management is all about software and systems, right? Put in the best technology, sit back, and watch as your processes run smoothly and the savings roll in? Apparently not. When HBR convened a panel of leading thinkers in the field of supply chain management, technology was not top of mind. People and relationships were the dominant issues of the day. The opportunities and problems created by globalization, for example, are requiring companies to establish relationships with new types of suppliers. The ever-present pressure for speed and cost containment is making it even more important to break down stubbornly high internal barriers and establish more effective cross-functional relationships. The costs of failure have never been higher. The leading supply chain performers are applying new technology, new innovations, and process thinking to far greater advantage than the laggards, reaping tremendous gains in all the variables that affect shareholder value: cost, customer service, asset productivity, and revenue generation. And the gap between the leaders and the losers is growing in almost every industry. This roundtable gathered many of the leading thinkers and doers in the field of supply chain management, including practitioners Scott Beth of Intuit, Sandra Morris of Intel, and Chris Gopal of Unisys. David Burt of the University of San Diego and Stanford's Hau Lee bring the latest research from academia. Accenture's William Copacino and the Warren Company's Robert Porter Lynch offer the consultant's perspectives. Together, they take a wide-ranging view of such topics as developing talent, the role of the chief executive, and the latest technologies, exploring both the tactical and the strategic in the current state of supply chain management.

  17. Supply Chain Management Practices in Toy Supply Chains

    DEFF Research Database (Denmark)

    Wong, Chee Yew; Arlbjørn, Jan Stentoft; Johansen, John

    2005-01-01

    qualitative semi-structured interviews and questionnaire with 11 main European toy retailers. Findings - The study concludes that there are three main SCM practices for toy retailers in terms of ordering behaviours (one-off, JIT, and mixed model), and one dominated SCM practice for toy manufacturers...... are required for such extreme volatility and seasonality are proposed. Originality/value - It reveals actual SCM practices in a volatile and seasonal supply chain, such that theoretical and practical gaps are identified. Also, it proposes a model to match manufacturing SCM-practices with retailer SCM-practices.......Purpose - Innovative products usually experience highly unpredictable and variable demand. This is especially valid for the volatile and seasonal toy industry, which produces high obsolete inventory, lost sales and markdown. In such a volatile industry, what supply chain management (SCM) practices...

  18. Supply Chain Management Performance in Tourism. Continental Hotels Chain Case

    OpenAIRE

    Gabriela Ţigu; Bogdan Călăreţu

    2013-01-01

    With its origins in logistics, Supply Chain Management (SCM) concept is covering all managerial aspects of the flow of materials and information from source to customer, across the entire range of materials handling and movement functions, and throughout an organization and its supply channels. In tourism, these issues relate to the whole process of providing tourism services from sourcing of raw materials, products or different services) to supply and distribution, and SCM performance can ul...

  19. chains

    Directory of Open Access Journals (Sweden)

    Gabriel Pérez-Salas

    2015-01-01

    Full Text Available Las barreras y aranceles al comercio exterior han disminuido significativamente gracias a los acuerdos multilaterales y los mecanismos de integración entre las naciones. Los costos logísticos representan una proporción significativa del precio final de los artículos, especialmente de los commodities. Por esta razón, minimizar los costos logísticos es un desafío importante para las naciones para fomentar la competitividad del comercio exterior y en particular para aprovechar la renta de los recursos naturales. En este artículo, proponemos un marco de referencia integral para la medición de costos logísticos, enfocado en determinar los extra-costos que resultan por procedimientos ineficientes y la falta de políticas públicas y regulaciones de las entidades públicas. Estos elementos no han sido considerados en la literatura, y este artículo aborda esta brecha. Como caso de estudio, presentamos la aplicación del marco de referencia para estimar los extra-costos en algunas cadenas logísticas de recursos naturales en Bolivia. Se presenta una discusión de los resultados encontrados, así como recomendaciones para trabajo futuro.

  20. The fishing industry - toward supply chain modelling

    DEFF Research Database (Denmark)

    Jensen, Toke Koldborg; Nielsen, Jette; Larsen, Erling P.

    Mathematical models for simulating and optimizing supply chain aspects such as distribution planning and optimal use of raw materials are widely used. However, modelling based on a holistic chain view is less studied, and food-related aspects such as quality and shelf life issues enforce additional...... requirements onto the chains. In this paper, we consider the supply chain structure of the Danish fishing industry and illustrate the potential of using mathematical models to identify quality and value-adding activities. This is a first step toward innovative supply chain modelling aimed to identify benefits...... for actors along chains in the fishing industry....

  1. The chain relation in sofic subshifts

    CERN Document Server

    Kazda, Alexandr

    2009-01-01

    The paper gives a characterisation of the chain relation of a sofic subshift. Every sofic subshift $\\Sigma$ can be described by a labelled graph $G$. Factorising $G$ in a suitable way we obtain the graph $G/_\\approx$ that offers insight into some properties of the original subshift. Using $G/_\\approx$ we describe first the chain relation in $\\Sigma$, then characterise chain-transitive sofic subshifts, chain-mixing sofic subshifts and finally the attractors of the subshift dynamic system. At the end we present (straightforward) algorithms deciding chain-transitivity and chain-mixing properties of a sofic subshift and listing all the attractors of the subshift system.

  2. VALUE CHAINS IN EMERGING MARKETS

    Directory of Open Access Journals (Sweden)

    Abdyramanova, Z.

    2016-11-01

    Full Text Available The textiles sector is one of the main industry sectors in Kyrgyzstan in terms of output, employment and increasingly exports. Textile clusters are developing and patterns in cluster formations are emerging that reflect the differing economic conditions of the regions, demonstrating particular influences on the value chain. These differences are both depicted in the two regions of Kyrgyzstan-south and north. In the north of the Republic the infrastructure is more developed, there is greater facility to access international markets (exports. In the south the infrastructure is less developed, and garment producers in the region serve mainly local niche and near-neighbour markets. The research objective is to assess the key drivers of the value chain and profitability in the textiles sector in Kyrgyzstan, by comparing the garment sewing sector in the two contrasting regions of south and north Kyrgyzstan.

  3. Formation of helical ion chains

    CERN Document Server

    Nigmatullin, Ramil; De Chiara, Gabriele; Morigi, Giovanna; Plenio, Martin B; Retzker, Alex

    2011-01-01

    We study the nonequilibrium dynamics of the linear to zigzag structural phase transition exhibited by an ion chain confined in a trap with periodic boundary conditions. The transition is driven by reducing the transverse confinement at a finite quench rate, which can be accurately controlled. This results in the formation of zigzag domains oriented along different transverse planes. The twists between different domains can be stabilized by the topology of the trap and under laser cooling the system relaxes to a helical chain with possibly nonzero winding number. Molecular dynamics simulations are used to obtain a large sample of possible trajectories for different quench rates. The scaling of the average winding number with different quench rates is compared to the prediction of the Kibble-Zurek theory, and a good quantitative agreement is found.

  4. Supply Chain Reorganization and Coordination

    Institute of Scientific and Technical Information of China (English)

    WANG Feng-bin

    2001-01-01

    Three generic forms of governance--hierarchy, hybrid and market are proposed in the newinstitutional economics, giving an abstract description of alternative coordination and control mechanisms forgeneral use. While this theory is known as far away from being operational and specified, a few researchersin the management and organization area are trying to extend Galbraith and/or Mintzberg's organizationaldesign theories into the application of logistical coordination for obtaining a smooth flow of products along thesupply chain within and without the focal organization. In this paper, we present an explorative case study onthe design of various organizational architectures of logistics activities and their relevant coordinationmechanisms, especially internal and external contracts as one new kind of hybrid mechanisms forcoordinating effective supply chains.

  5. Mobilizing Sustainable Bioenergy Supply Chains

    OpenAIRE

    Baxter, David; Cowie, Annette; BERNDES Goran; Junginger, Martin; MCMILLAN James D; Saddler, J N; VAN REE Rene

    2015-01-01

    Analysis of the five globally significant supply chains conducted by IEA Bioenergy inter-Task teams – boreal and temperate forests, agricultural crop residues, biogas, lignocellulosic crops, and cultivated grasslands and pastures in Brazil – has confirmed that feedstocks produced using logistically efficient production systems can be mobilized to make significant contributions to achieving global targets for bioenergy. However, the very significant challenges identified in this report indi...

  6. China's Role in Purchasing Chain

    Institute of Scientific and Technical Information of China (English)

    Eva; Alice

    2007-01-01

    @@ In current world market,"Made-in-China"often means good price and competitive quality.In terms of China's trade pattern,more than half of Chinese exporting products belong to processing trade industry according to the demands and requirements of international orders.On the purchasing chain,China is learning from its international partners.Safety and quality always tops all issues.

  7. The dynamic chain event graph

    OpenAIRE

    2015-01-01

    In this paper we develop a formal dynamic version of Chain Event Graphs (CEGs), a particularly expressive family of discrete graphical models. We demonstrate how this class links to semi-Markov models and provides a convenient generalization of the Dynamic Bayesian Network (DBN). In particular we develop a repeating time-slice Dynamic CEG providing a useful and simpler model in this family. We demonstrate how the Dynamic CEG’s graphical formulation exhibits asymmetric conditional independence...

  8. On Markov Chains and Filtrations

    OpenAIRE

    1997-01-01

    In this paper we rederive some well known results for continuous time Markov processes that live on a finite state space.Martingale techniques are used throughout the paper. Special attention is paid to the construction of a continuous timeMarkov process, when we start from a discrete time Markov chain. The Markov property here holds with respect tofiltrations that need not be minimal.

  9. Modeling Continuous IED Supply Chains

    Science.gov (United States)

    2014-03-27

    criminals, pirates, drug traffickers and terrorists. Moreover, JIEDDO has pointed out the spread of IED use to places such as Thailand and Norway. U.S... human networks that place IEDs. Dekker categorizes two main human aspects of IED placement. The first is motivation which 8 affects the number of...methods provided in this thesis and apply them to combat other threats. For example, drug trafficking supply chains. IED and drug trafficking supply

  10. Supply-Chain Risk Analysis

    Science.gov (United States)

    2016-06-07

    Classic Buffer Overflow 1. http://cwe.mitre.org/top25/ SANS (SysAdmin, Audit, Network , Security ) Institute 23 Veracode: State of Software Security ...Approved for public release; distribution unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17...supply-chain risks. He participated in the design and development of the DHS Build- Security -In Web site and continues to contribute articles to it

  11. Synchronization Algorithms on Oriented Chains

    Directory of Open Access Journals (Sweden)

    D. Bein

    2008-01-01

    Full Text Available We present a space- and time-optimal self-stabilizing algorithm, SSDS, for a given synchronization problem on asynchronous oriented chains. SSDS is uniform and works under the unfair distributed daemon. From SSDS we derive solutions for the local mutual exclusion and distributed sorting. Algorithm SSDS can also be used to obtain optimal space solutions for other problems such as broadcasting, leader election, and mutual exclusion.

  12. Supply Chain Performance Evaluation: Trends and Challenges

    Directory of Open Access Journals (Sweden)

    Ezutah U. Olugu

    2009-01-01

    Full Text Available Problem statement: In today’s manufacturing world, globalization policies and rejuvenation have created a more intensive competition amongst manufacturers. On the other hand, manufacturers have turned to the option of adopting innovative technologies, process re-engineering and strategies such as efficient supply chain management to achieve a sustainable competitive advantage. Effective supply chain performance measurement has been identified as a key issue towards efficient supply chain management. To explore the extent of research in supply chain performance measurement and establish the gap in knowledge in supply chain performance measurement using fuzzy logic operation. Approach: Literatures in the area of supply chain performance measurement had been extensively reviewed. Both traditional and fuzzy logic approaches to supply chain performance measurement were scrutinized. Further scrutiny was carried out to establish potential research areas in the application of fuzzy logic operations in supply chain performance measurement. Results: The supply chain performance measurement using fuzzy logic operation was identified as a new direction in measuring the uncertainty and ambiguity surrounding supply chain performance measurement. Direction for further studies in the application of fuzzy logic operation in supply chain management and its performance measurement were also identified. Conclusion: Result of this study implied that there is still a gap in knowledge in the area of supply chain performance measurement. This new direction of studies involved extending the existing supply chains to incorporate product recovery after the useful life.

  13. ARCHITECTURAL CONCEPTS FOR VALUE CHAINS

    Directory of Open Access Journals (Sweden)

    A.C. Janse van Rensburg

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT:The Porter Value Chain has been widely adopted by the business community as a mechanism to understand and comprehend complexity in business environments, with the ultimate goal of structuring the business to maximize its competitive advantage. Implementing the Value Chain is not easy: a number of organizations can testify to their failure to derive any benefits at all from this concept. To overcome this problem, an approach is presented to assist the organization in creating a Value Chain reference model within the broader context of the organization’s enterprise architecture.

    AFRIKAANSE OPSOMMING: Die “Porter Waardeketting” is ’n algemene aanvaarde praktyk wat deur maatskappye gebruik word om die kompleksiteit van besigheidsomgewings mee te verstaan. Die uiteindelike doel hiervan is om die besigheid se mededings voordele te optimiseer. Om die Waardekettingkonsep te implementeer, is nie ’n maklike taak nie – verskeie organisasies kan getuig van mislukte implementeringspogings. Hierdie artikel beskryf ’n benadering beskryf wat gebruik kan word om die organisasie te help om ’n Waardekettingmodel te skep in die bree konteks van die organisasie se besigheidsargitektuur.

  14. Towards biotracing in food chains.

    Science.gov (United States)

    Hoorfar, Jeffrey; Wagner, Martin; Jordan, Kieran; Bouquin, Solveig Lind; Skiby, Jeffrey

    2011-03-01

    Biotracing is tracing (backward)/tracking (forward) biological contamination in the food/feed chain. Advances in detection technologies, improvements in molecular marker identification, clearer understanding of pathogenicity markers, improved modelling methodologies and, more importantly, the integration of these disciplines will lead to better capability in full-chain tracing and tracking biological contaminations (biotracing). The advantages of improved biotraceability are faster intervention, limited recalls and more targeted remedial action. The project is not dealing with risk assessments but developing tools that can be used in "second-generation" risk assessments involving quantitative microbiology. This concept is the core activity of BIOTRACER, which is an Integrated Project (2007-2011) funded by the EU 6th Framework Programme. The research in biotracing is organised into five Research Areas, and 21 cross-disciplinary work packages that cover tracing and tracking of contamination in feed, meat and dairy chains, in addition to accidental and deliberate contamination of bottled water. The BIOTRACER Consortium consists of 46 partners, including Europe's largest food/feed industries, several SMEs, and relevant International Cooperation (INCO) countries. The Consortium includes experts in predictive microbiology, database developers, software companies, risk assessors, risk managers, system biologists, food and molecular microbiologists, legislative officers, standardization and validation members and food retailers. The outcomes will ensure a more reliable and rapid response to a microbial contamination event.

  15. Polymerization as a Model Chain Reaction

    Science.gov (United States)

    Morton, Maurice

    1973-01-01

    Describes the features of the free radical, anionic, and cationic mechanisms of chain addition polymerization. Indicates that the nature of chain reactions can be best taught through the study of macromolecules. (CC)

  16. Supply chain strategies, issues and models

    CERN Document Server

    Ramanathan, Ramakrishnan

    2014-01-01

    In the 21st century, supply chain operations and relationships among supply chain partners have become highly challenging, necessitating new approaches, e.g., the development of new models. Supply Chain Strategies, Issues and Models discusses supply chain issues and models with examples from actual industrial cases. Expert authors with a wide spectrum of knowledge working in various areas of supply chain management from various geographical locations offer refreshing, novel and insightful ideas and address possible solutions using established theories and models. Supply Chain Strategies, Issues and Models features studies that have used mathematical modeling, statistical analyses and also descriptive qualitative studies. The chapters cover many relevant themes related to supply chains and logistics including supply chain complexity, information sharing, quality (six sigma), electronic Kanbans, inventory models, scheduling, purchasing and contracts. To facilitate easy reading, the chapters that deal with suppl...

  17. SUPPLY CHAIN MANAGEMENT – KEY FACTORS

    Directory of Open Access Journals (Sweden)

    Magdalena Daniela DINU

    2014-06-01

    Full Text Available This paper exposes Supply Chain Management by its key factors. Briefly, where the Supply Chain Management is treated as strategic part of a company then maintaining both control and influence throughout the entire supply chain are key factors and critical to success. On the other hand, finding the right partner to manage the non-strategic Supply Chains would be another key factor too. To define the most important key factors within Supply Chain Management means a deeply understanding of both Supply Chain’ s components, procedures, workflow, processes and the importance of Supply Chain Management into maximizing company's value. SCORE model able to provide solid information about measuring performance and identifying priorities within Supply Chain Management will help us to understand the key factors by analyzing its elements: Plan, Source, Make, Deliver,Return, Enable. These elements covers all the challenging areas from first to third tier of Supply Chain Management.

  18. Information flow in the pharmaceutical supply chain.

    Science.gov (United States)

    Yousefi, Nazila; Alibabaei, Ahmad

    2015-01-01

    Managing the supply chain plays an important role in creating competitive advantages for companies. Adequate information flow in supply chain is one of the most important issues in SCM. Therefore, using certain Information Systems can have a significant role in managing and integrating data and information within the supply chain. Pharmaceutical supply chain is more complex than many other supply chains, in the sense that it can affect social and political perspectives. On the other hand, managing the pharmaceutical supply chain is difficult because of its complexity and also government regulations in this field. Although, Iran has progressed a lot in pharmaceutical manufacturing, still there are many unsolved issues in managing the information flow in the pharmaceutical supply chain. In this study, we reviewed the benefits of using different levels of an integrated information system in the supply chain and the possible challenges ahead.

  19. BUSINESS TENDENCIES IN SERVICES WITHIN SUPPLY CHAIN

    OpenAIRE

    Beata Skowron-Grabowska

    2008-01-01

    Supply chain management has been a major component of competitive strategy to enhance organizational productivity and profitability. Client satisfaction and improvement in profitability are two basic goals while organizing supply chain. In the paper author tried to prove that there is a correlation between organization of supply chain and subjective evaluation of economic situation by enterprises. Logistics integration helps enterprises to find their place in the supply chain.

  20. Supply Chain Integration: Challenges and Solutions

    OpenAIRE

    Sweeney, Edward

    2011-01-01

    Rapid changes in technological development are forcing businesses to continuously innovate to improve their competitiveness, which is particularly evident in logistics and supply chain management (SCM), where innovation impacts both the strategic and operational levels. Supply Chain Innovation for Competing in Highly Dynamic Markets: Challenges and Solutions investigates the role of innovation in the management of supply chains of today. This book focuses on supply chain integration from both...

  1. Australian Lamb Supply Chain: A Conceptual Framework

    OpenAIRE

    Jie, Ferry

    2011-01-01

    In the last decade, supply chain management has played an important role to lead agribusiness today to succeed in their business goals, to gain competitive advantages, and to improve business performance. As the result of that, there has been extensive studying in a popular topic of strategic supply chain management in order to improve business performance as well as along supply chain performance under the real situation. This is because in current business world, supply chain practices are ...

  2. Visualisation for System Learning in Supply Chains

    Science.gov (United States)

    Lindskog, Magnus; Abrahamsson, Mats; Aronsson, Hakan

    2007-01-01

    Contemporary supply chains are vastly complex, and decisions made by actors have system-wide consequences that these might not be able to foresee. There are gaps between "best practice"-founded theory and actual practice in supply chains. To remedy this, we argue, the supply chain actors need to enhance systems knowledge. There is a need to…

  3. Learning to Integrate: Supply Chains Reconceptualised

    Science.gov (United States)

    Sense, Andrew J.; Clements, Michael D. J.

    2007-01-01

    This paper introduces and explains a conception of supply chains from a situated learning perspective. This non-conventional supply chain perspective invites the reader to consider supply chain scenarios as "situated learning opportunities involving multiple communities of practice" interacting and participating together. It is argued that by…

  4. Cellular chain formation in Escherichia coli biofilms

    DEFF Research Database (Denmark)

    Vejborg, Rebecca Munk; Klemm, Per

    2009-01-01

    In this study we report on a novel structural phenotype in Escherichia coli biofilms: cellular chain formation. Biofilm chaining in E. coli K-12 was found to occur primarily by clonal expansion, but was not due to filamentous growth. Rather, chain formation was the result of intercellular...

  5. A concept for collaborative supply chain planning

    DEFF Research Database (Denmark)

    Alfnes, E.; Dreyer, H.C.; Hvolby, Hans-Henrik

    2012-01-01

    vendors such as Oracle, SAP and I2 offer supply chain planning systems. This limits the ability for SMEs to exploit the supply chain planning options. This paper is part of a research project carried out to develop a new supply chain add-on for Microsoft AX, a very common system for SMEs. The paper...

  6. The Advancement Value Chain: An Exploratory Model

    Science.gov (United States)

    Leonard, Edward F., III

    2005-01-01

    Since the introduction of the value chain concept in 1985, several varying, yet virtually similar, value chains have been developed for the business enterprise. Shifting to higher education, can a value chain be found that links together the various activities of advancement so that an institution's leaders can actually look at the philanthropic…

  7. Secure Supply Chains: Design Restrictions & Organizational Boundaries

    NARCIS (Netherlands)

    Ludema, M.W.

    2009-01-01

    An important issue in the design of secure supply chains is the understanding of the relation between supply chains and the organizational responsibility of specific parts of these supply chains. Organizational boundaries change over time by means of vertical and/or horizontal (des)-integration and

  8. On a Result for Finite Markov Chains

    Science.gov (United States)

    Kulathinal, Sangita; Ghosh, Lagnojita

    2006-01-01

    In an undergraduate course on stochastic processes, Markov chains are discussed in great detail. Textbooks on stochastic processes provide interesting properties of finite Markov chains. This note discusses one such property regarding the number of steps in which a state is reachable or accessible from another state in a finite Markov chain with M…

  9. Compressing redundant information in Markov chains

    OpenAIRE

    2006-01-01

    Given a strongly stationary Markov chain and a finite set of stopping rules, we prove the existence of a polynomial algorithm which projects the Markov chain onto a minimal Markov chain without redundant information. Markov complexity is hence defined and tested on some classical problems.

  10. STATISTICS OF A CLASS OF MARKOV CHAINS

    Institute of Scientific and Technical Information of China (English)

    DENG Yingchun; CAO Xianbing

    2004-01-01

    In this paper we prove that the distributions of their sojourn time and hitting time at one special state for random walks which are allowed to be finite or infinite and Markov chains on star-graphs with discrete time can uniquely determine the probability distribution of the whole chains. This result also suggests a new statistical method for Markov chains.

  11. Consistency and Refinement for Interval Markov Chains

    DEFF Research Database (Denmark)

    Delahaye, Benoit; Larsen, Kim Guldstrand; Legay, Axel;

    2012-01-01

    Interval Markov Chains (IMC), or Markov Chains with probability intervals in the transition matrix, are the base of a classic specification theory for probabilistic systems [18]. The standard semantics of IMCs assigns to a specification the set of all Markov Chains that satisfy its interval...

  12. Chains versus Independents: Newspaper and Market Characteristics.

    Science.gov (United States)

    Hale, F. Dennis

    A study examined the marketing differences between large chain newspapers and small chain and independent newspapers by analyzing differences in characteristics of the newspapers, patterns of circulation, economic and social conditions of the market, and competition from other print media. The 200 newspapers studied--113 large chain and 87 small…

  13. Principles in Halal Supply Chain Management

    NARCIS (Netherlands)

    Tieman, H.; Vorst, van der J.G.A.J.; Maznah Che Ghazali,

    2012-01-01

    Purpose – The purpose of this paper is to introduce a new framework to optimise the design of halal food supply chains, called the “Halal Supply Chain Model”. In this research the main logistics business processes are defined, which are the determinants for the halal supply chain performance. Design

  14. Systematic Methodology of Integrated Supply Chain Management

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Supply chain management (SCM) is a strategy for global competition. Th e characteristics of SCM are integration, systematic and coordination. Using sys tematic, coordination thoughts and integration theory, a new model of enterprise integration based on supply chain management is put forward and an implementing paradigm for systematic methodology of supply chain management is developed.

  15. Experiences with the Mango Chain Game

    NARCIS (Netherlands)

    Meijer, S.A.; Zuñiga-Arias, G.; Sterrenburg, S.

    2005-01-01

    The mango chain game is a simulation game used for research purposes. It facilitated studying the bargaining power of Costa Rican mango producers in international supply chains of mango. The game simulates a simplified mango export chain in which real world local producers can play the role of produ

  16. Review of Published Chain Information System Research

    NARCIS (Netherlands)

    Storer, C.E.; Trienekens, J.H.; Beulens, A.J.M.; Quaddus, M.A.

    2006-01-01

    This paper provides a review of the literature on chains and networks that examine interorganisational information systems used to manage chains of organisations. Difficulty was found in finding out how organisations exchanged information to manage relationships with customers and suppliers in chain

  17. Supply Chain Management Performance in Tourism. Continental Hotels Chain Case

    Directory of Open Access Journals (Sweden)

    Gabriela Ţigu

    2013-02-01

    Full Text Available With its origins in logistics, Supply Chain Management (SCM concept is covering all managerial aspects of the flow of materials and information from source to customer, across the entire range of materials handling and movement functions, and throughout an organization and its supply channels. In tourism, these issues relate to the whole process of providing tourism services from sourcing of raw materials, products or different services to supply and distribution, and SCM performance can ultimately be measured by customer satisfaction. Thus, an important component of tourism SCM is the demand management. Therefore, this study aims to highlight the features of the concept of SCM and demand management in tourism, with an emphasis on a hotel chain in Romania, based on research and analysis of tourist traffic indicators as well as assessment of customers satisfaction. The sources of information are the internal company statistics, as well as various hotels booking websites that offer customers’ feedback. The results of the study provide a snapshot of how the hotel demand management can influence SCM performance in tourism.

  18. The influence of power in supply chain innovation; a case study of the Dutch wheat chain

    NARCIS (Netherlands)

    Pol, Hanneke; Visscher, Klaasjan

    2010-01-01

    The purpose of this article is to clarify the relation between the power structure of a supply chain and the possibilities to realize supply chain innovations. In an in-depth case study of the faltering start of an innovation trajectory in the Dutch wheat supply chain, we show that supply chain inno

  19. Supply chain management - safety aspects

    Directory of Open Access Journals (Sweden)

    2010-12-01

    Full Text Available Developing economy, growing customer requirements and competition make the service level higher. Delivery safety - as the highest priority - has to be maintained at the same time. Customers more and more often require transport to be very flexible, fast, and complex in terms of carrying every quantity of goods of different sizes, from and to different countries, through customs clearance, storing and distribution of shipments. Meeting these requirements depends on complex information on transport processes and their safety. The article presents safety foundations and institution Authorized Economic Operator - AEO in supply chains.

  20. TBA for the Toda chain

    Energy Technology Data Exchange (ETDEWEB)

    Kozlowski, K.K.; Teschner, J.

    2010-06-15

    We give a direct derivation of a proposal of Nekrasov-Shatashvili concerning the quantization conditions of the Toda chain. The quantization conditions are formulated in terms of solutions to a nonlinear integral equation similar to the ones coming from the thermodynamic Bethe ansatz. This is equivalent to extremizing a certain function called Yang's potential. It is shown that the Nekrasov-Shatashvili formulation of the quantization conditions follows from the solution theory of the Baxter equation, suggesting that this way of formulating the quantization conditions should indeed be applicable to large classes of quantized algebraically integrable models. (orig.)

  1. MODELING SUPPLY CHAIN WITH SIMULATION

    OpenAIRE

    János Benkõ

    2010-01-01

    Supply Chain Management faces a lot of challenging issues involving difficult decisions which can be company-oriented and customer-oriented issues. In this study we deal with customeroriented issues. For example, a customer’s demand may not be fully satisfied from stock on hand and the shortage may be backordered or the sale may be lost. Either way, it is desirable to balance the holding cost which depends on the magnitude of inventory against the cost of not fully satisfying customer demand....

  2. Heat transport in coupled inhomogeneous chains

    Institute of Scientific and Technical Information of China (English)

    Hu Tao; Bai Meng; Hu Ke; Tang Yi

    2011-01-01

    We first investigate the heat transport in a network model consisting of two coupled dimerized chains. Results indicate that the thermal resistance of each chain increases with the decrease of the mass ratio γ of the two types of atoms. Then, we find, when a light impurity or a heavy one is added in the two coupled homogeneous chains and coupled with a particle of another chain, the interface thermal resistances Rlint andRγint present different dependences on the mass ratio γ'. Finally, a persistent circulation of energy current is observed in coupled inhomogeneous chains with two pairs of interchain coupling.

  3. Integration of Forestry Industrial Chain in China

    Institute of Scientific and Technical Information of China (English)

    Zhanzhan; LAN; Liqun; WANG

    2013-01-01

    Based on the Smile Curve and Michael E. Porter’ value chain model,this paper points out that China’s forestry industry stays at the low end of the value chain for a long time. Raw materials are imported from foreign countries and also sold in foreign countries. Then,the authors analyze characteristics and existing problems of China’s forestry industrial chain. They put forward the development direction of China’s forestry industrial chain with reference to International Paper Company. Finally,they present their recommendations for integration of China’s forestry industrial chain.

  4. Uncertainty quantification for Markov chain models.

    Science.gov (United States)

    Meidani, Hadi; Ghanem, Roger

    2012-12-01

    Transition probabilities serve to parameterize Markov chains and control their evolution and associated decisions and controls. Uncertainties in these parameters can be associated with inherent fluctuations in the medium through which a chain evolves, or with insufficient data such that the inferential value of the chain is jeopardized. The behavior of Markov chains associated with such uncertainties is described using a probabilistic model for the transition matrices. The principle of maximum entropy is used to characterize the probability measure of the transition rates. The formalism is demonstrated on a Markov chain describing the spread of disease, and a number of quantities of interest, pertaining to different aspects of decision-making, are investigated.

  5. The fish industry - toward supply chain modelling

    DEFF Research Database (Denmark)

    Jensen, Toke Koldborg; Nielsen, Jette; Larsen, Erling

    2010-01-01

    Mathematical models for simulating and optimizing aspects of supply chains such as distribution, planning, and optimal handling of raw materials are widely used. However, modeling based on a holistic chain view including several or all supply chain agents is less studied, and food-related aspects...... such as quality and shelf-life issues enforce additional requirements onto the chains. In this article, we consider the supply chain structure of the fish industry. We discuss and illustrate the potential of using mathematical models to identify quality and value-adding activities. The article provides a first...... step toward innovative supply chain modeling aimed to identify benefits for all agents along chains in the fish industry....

  6. Sustainability Analysis for Gayo Coffee Supply Chain

    Directory of Open Access Journals (Sweden)

    Rachman Jaya

    2013-01-01

    Full Text Available Sustainable supply chain is a development of the conventional supply chains that discuses trade-off among economic, social and environmental dimensions in order to achieve better responsiveness in terms of quality, quantity and time-delivery in the supply chain structure. The objective of this research was to determine the Gayo coffee supply chain sustainability. The research was conducted at Bener Meriah and Aceh Tengah Districts, Aceh Province, Indonesia. Key actors in the supply chain considered were farmers, collectors, agro-industry and exporter. Sustainability dimensions considered in this research were the economic, social, environmental and material resources. The performance of each aspect was analyzed by using Multi-dimensional scaling and leverage analysis. The result of the research showed that the composite of Gayo coffee supply chain sustainability index was 33.53 which mean less sustainable level. Therefore it is recommended to reengineering the Gayo coffee supply chain by considering all of the four sustainability dimensions above.

  7. Determining an optimal supply chain strategy

    Directory of Open Access Journals (Sweden)

    Intaher M. Ambe

    2012-11-01

    Full Text Available In today’s business environment, many companies want to become efficient and flexible, but have struggled, in part, because they have not been able to formulate optimal supply chain strategies. Often this is as a result of insufficient knowledge about the costs involved in maintaining supply chains and the impact of the supply chain on their operations. Hence, these companies find it difficult to manufacture at a competitive cost and respond quickly and reliably to market demand. Mismatched strategies are the root cause of the problems that plague supply chains, and supply-chain strategies based on a one-size-fits-all strategy often fail. The purpose of this article is to suggest instruments to determine an optimal supply chain strategy. This article, which is conceptual in nature, provides a review of current supply chain strategies and suggests a framework for determining an optimal strategy.

  8. Configurational statistics of confined polymer chains

    Energy Technology Data Exchange (ETDEWEB)

    Lohse, David John

    1978-01-01

    The work on confined chain statistics is reviewed. The work on the general statistics is discussed first, and then some of the theories for the applications of statistics are considered. Two methods for determining the general statistics of a confined chain are discussed. The first is the method of images. The second method involves the use of differential equations. In a specific case the statistics of the unconfined chain are chosen to be defined by the Gaussian real chain distribution. The confinement is provided by two parallel walls. The distribution for the four possible types of chains, bridges (tie chains), loops, cilia (dangling chain ends), and floating (unattached) chains, are derived. These statistics are then applied to two polymer systems in which the confinement is due to internal surfaces, semicrystalline polymers and block copolymers. Both systems are modelled by chains between two walls for a number of morphologies. Mechanical properties are calculated for both systems and for block copolymers swelling is also considered. The main result of this work is that there are two effects which determine the behavior of the chains in these systems. The first is the effect of the confinement which operates on all the chains, since the mode of attachment is not important. The confinement reduces the number of configurations available to the chains. This effect is larger the closer the walls are, relative to the length and stiffness of the chains. The second effect operates only on bridges, since it requires that the ends of the chain be attached to different walls. This is the inherent elastic nature of the bridge, which means that the number of configurations is reduced when it is stretched beyond its equilibrium length. All the behavior calculated here can be explained by these two effects.

  9. MODELING A VALUE CHAIN IN PUBLIC SECTOR

    Directory of Open Access Journals (Sweden)

    Daiva Rapcevičienė

    2014-08-01

    Full Text Available Purpose – Over the past three decades comprehensive insights were made in order to design and manage the value chain. A lot of scholars discuss differences between private sector value chain – creation profit for the business and public sector value chain, the approach that public sector creates value through the services that it provides. However, there is a lack of a common understanding of what public sector value chain is in general. This paper reviews the literature on how the private value chain was transformed into public value chain and reviews a determination and architecture of a value chain in public sector which gives a structural approach to greater picture of how all structure works. It reviews an approach that the value chain for the public sector shows how the public sector organizes itself to ensure it is of value to the citizens. Design/methodology/approach – descriptive method, analysis of scientific literature. Findings – The public sector value chain is an adaptation of the private sector value chain. The difference between the two is that the customer is the focus of the public sector context, versus the profit focus in the private sector context. There are significant similarities between the two chain models. Each of the chain models are founded on a series of core components. For the public sector context, the core components are people, service and trust. Research limitations/implications – this paper based on presenting value chain for both private and public sectors and giving deeper knowledge for public sector value chain model. Practical implications – comprehension of general value chain model concept and public sector value chain model helps to see multiple connections throughout the entire process: from the beginning to the end. The paper presents the theoretical framework for further study of the value chain model for waste management creation. Originality/Value – The paper reveals the systematic

  10. Light chain immunofluorescence in various nephropathies

    Directory of Open Access Journals (Sweden)

    Megha S Uppin

    2011-01-01

    Full Text Available Context: Light chain immunofluoresence (IF in renal biopsy is routinely used in the diagnosis of light chain deposition disease (LCDD, amyloidosis and cast nephropathy. Light chain predominance has also been reported in certain glomerulopathies like IgA nephropathy. However, pathogenesis of this pattern of deposition in various glomerulopathies is uncertain. Aim: To discuss the pathogenesis and utility of light chain IF in nephropathies. Setting and Design: Retrospective study. Materials and Methods: The pattern of light chain IF and light microscopic diagnosis in 306 cases of various nephropathies was reviewed. Direct IF was done in all these cases with commercial fluorescence (Fluoresciene Isothiocynate conjugated polyclonal rabbit anti-human antisera against IgM, IgG, IgA, C3, C1q, kappa and lambda light chains. Results: Light chain deposits were seen in 240 (78.43% cases. In IgA nephropathy, lupus nephritis and post-infectious glomerulonephritis (PIGN, lambda positivity was more as compared to kappa. Light chain deposits in LCDD and membranous nephropathy were more kappa type. The IF pattern in amyloidosis was not consistent. Conclusion: The pathogenesis of light chain predominance in glomerulopathies is not clear and it depends on isoelectric point and size of the immune complex. Light chain IF should be performed routinely in all the renal biopsies.

  11. Structure of polymer chains under confinement

    Indian Academy of Sciences (India)

    Jyotsana Lal

    2008-11-01

    We observe by SANS the structure of neutral polystyrene and charged polystyrene sulphonate chains in semi-dilute solutions confined in a model nanoporous glass, Vycor. The size of the free chains in solution is always larger than the pore diameter, 70. The use of a suitable mixture of hydrogenated and deuterated solvents and polymers enables us to measure directly the form factor of one single chain among the others. Single chain form factor was observed both for bulk and confined chains using the condition of zero average contrast. Our measurements on neutral polymer chains are in agreement with the theoretical predictions established by Daoud and de Gennes for chains confined in a cylindrical pore when the chains are entangled and laterally squeezed but remain ideal at large scale along the cylinder axis because of the screening of the excluded volume interactions (so-called regime of ``semi-dilute cigars"). For confined charged polymers, a peak is observed whose intensity increases with molecular weight and the asymptotic 1/ scattering region is extended compared to the bulk. We infer that the chains are sufficiently extended, under the influence of confinement, to highlight the large scale disordered structure of Vycor even under contrast matched conditions. The asymptotic behaviour of the observed interchain structure factor is ≈ 1/2 and ≈ 1/ for free and confined chains respectively.

  12. Phase behaviour of polyethylene knotted ring chains

    Institute of Scientific and Technical Information of China (English)

    Wen Xiao-Hui; Zhang Lin-Xi; Xia A-Gen; Chen Hong-Ping

    2011-01-01

    The phase behaviour of polyethylene knotted ring chains is investigated by using molecular dynamics simulations.In this paper, we focus on the collapse of the polyethylene knotted ring chain, and also present the results of linear and ring chains for comparison. At high temperatures, a fully extensive knot structure is observed. The mean-square radius of gyration per bond〈S2〉/(Nb2)and the shape factor(δ*)depend on not only the chain length but also the knot type.With temperature decreasing, chain collapse is observed, and the collapse temperature decreases with the chain length increasing. The actual collapse transition can be determined by the specific heat capacity Cv, and the knotted ring chain undergoes gas-liquid-solid-like transition directly. The phase transition of a knotted ring chain is only one-stage collapse, which is different from the polyethylene linear and ring chains. This investigation can provide some insights into the statistical properties of knotted polymer chains.

  13. A possible chain of motivation

    Directory of Open Access Journals (Sweden)

    Rodica Ianole

    2007-12-01

    Full Text Available On a world-wide basis there is a growing concern about organization' s capability to retain their top talents. In the specific case of a student's organization . Team Work - we confront with the same problems: how to inspire our members to act in the spirit of the values we share: professionalism, team work and voluntariate, and how to determine them to remain part of the system. This is where motivation appears like one of those terms that can mean very different things depending on exactly where you sit. The aim of the present paper is to draw a schematic picture of how it can work a chain of motivation in Team Work and other similar organizations.

  14. The stylohyoid chain: CT imaging

    Energy Technology Data Exchange (ETDEWEB)

    Uysal Ramadan, Selma, E-mail: uysalselma@yahoo.co [Department of Radiology, Ankara Training and Research Hospital, Ankara 06590 (Turkey); Goekharman, Dilek, E-mail: gokharman@ttnet.net.t [Department of Radiology, Ankara Training and Research Hospital, Ankara 06590 (Turkey); Kosar, Pinar, E-mail: pkosar@hotmail.co [Department of Radiology, Ankara Training and Research Hospital, Ankara 06590 (Turkey); Kacar, Mahmut, E-mail: mkacar1961@gamil.co [Department of Radiology, Ankara Training and Research Hospital, Ankara 06590 (Turkey); Kosar, Ugur, E-mail: ugurkosar@hotmail.co [Department of Radiology, Ankara Training and Research Hospital, Ankara 06590 (Turkey)

    2010-09-15

    We aimed in this report to discuss the embryology, anatomy, theories of ossification and symptoms, clinical presentation, and diagnosis of the stylohyoid chain (SHC) variations, together with the role of radiographs, computed tomography (CT) and three-dimensional (3D)-CT in showing these variations. Because CT/3D-CT additionally facilitates visualization of the entire SHC with different axes, it is the most valuable method for establishing the relationship between the SHC and the surrounding tissue. SHC variation can be discovered during CT performed for indications other than ossified SHC. It is important to diagnose whether or not the SHC is ossified, since one of the treatment procedures in ossified SHC is total excision. If the clinician and radiologist are aware of these variations observed in the SHC, patients with vague symptoms may be spared unnecessary investigations and may be properly diagnosed earlier.

  15. Worldline as a Spin Chain

    CERN Document Server

    Fatollahi, Amir H

    2016-01-01

    The general theoretical ground for the models based on the compact angle coordinates is presented. It is observed that the proper dependence on compact coordinates has to be through the group elements and is achieved most naturally in a discrete-time formulation of the theory. By the construction, the discrete worldline inlaid by compact coordinates resembles the spin chains of magnetic systems. As examples, the models based on the groups U(1), $\\mathbb{Z}_N$ and SU(2) are explicitly constructed and their exact energy spectra are obtained. As the consequence of minima in the spectra, the models exhibit a phase transition of first-order. The dynamics by U(1) group is attempted to be fitted to the proposed role for monopoles in the dual Meissner effect of confinement mechanism.

  16. Revisiting Causality in Markov Chains

    CERN Document Server

    Shojaee, Abbas

    2016-01-01

    Identifying causal relationships is a key premise of scientific research. The growth of observational data in different disciplines along with the availability of machine learning methods offers the possibility of using an empirical approach to identifying potential causal relationships, to deepen our understandings of causal behavior and to build theories accordingly. Conventional methods of causality inference from observational data require a considerable length of time series data to capture cause-effect relationship. We find that potential causal relationships can be inferred from the composition of one step transition rates to and from an event. Also known as Markov chain, one step transition rates are a commonly available resource in different scientific disciplines. Here we introduce a simple, effective and computationally efficient method that we termed 'Causality Inference using Composition of Transitions CICT' to reveal causal structure with high accuracy. We characterize the differences in causes,...

  17. Spin chains and string theory.

    Science.gov (United States)

    Kruczenski, Martin

    2004-10-15

    Recently, an important test of the anti de Sitter/conformal field theory correspondence has been done using rotating strings with two angular momenta. We show that such a test can be described more generally as the agreement between two actions: one a low energy description of a spin chain appearing in the field theory side, and the other a limit of the string action in AdS5xS5. This gives a map between the mean value of the spin in the boundary theory and the position of the string in the bulk, and shows how a string action can emerge from a gauge theory in the large-N limit.

  18. Mathematical description of the position of mining chain links on a driving chain wheel

    Energy Technology Data Exchange (ETDEWEB)

    Dolipski, M.

    1982-01-01

    The paper analyzes effects of geometry on interaction between the chain and chain wheels of face conveyors in underground coal mines. Interaction between chain links and wheel toothing is investigated using mathematical models. Three mesh types are comparatively evaluated, so-called normal mesh, nominal mesh and special mesh. Chain position on the chain wheel is shown in 3 schemes. Mathematical formulae used for characterizing mesh types are derived. Effects of the following factors on interaction between a chain link and a chain wheel are analyzed: link quality and differences in quality and dimensions among chain links, friction wear of links and toothing, elastic and plastic chain elongation, friction between links and toothing. A geometric model of the interaction between the chain wheel and haulage chain (in the form of a double polygon) is used. The mathematical model permits the following problems to be analyzed: load distribution among chain links on a chain wheel, load distribution on toothing, load fluctuations, effects of friction wear of chain and toothing. Examples of practical use of the formulae are discussed. (14 refs.)

  19. The Evolutionary Dynamics of Biofuel Value Chains

    DEFF Research Database (Denmark)

    Ponte, Stefano

    2014-01-01

    In this paper I propose to push the frontier of global value chain (GVC) governance analysis through the concept of ‘polarity’. Much of the existing GVC literature has focused on ‘unipolar’ value chains, where one group of ‘lead firms’ inhabiting a specific function in a chain plays a dominant role...... and multipolarity. Empirically, I do so by examining the evolutionary dynamics of governance in biofuel value chains, with specific focus on the key regulatory and institutional features that facilitated their emergence and expansion. First, I examine the formation, evolution, and governance of three national....../regional value chains (in Brazil, the US, and the EU); then, I provide evidence to support a trend towards the increasing but still partial formation of a global biofuel value chain and examine its governance traits....

  20. Kinetic Chain Rehabilitation: A Theoretical Framework

    Directory of Open Access Journals (Sweden)

    Aaron Sciascia

    2012-01-01

    Full Text Available Sequenced physiologic muscle activations in the upper and lower extremity result in an integrated biomechanical task. This sequencing is known as the kinetic chain, and, in upper extremity dominant tasks, the energy development and output follows a proximal to distal sequencing. Impairment of one or more kinetic chain links can create dysfunctional biomechanical output leading to pain and/or injury. When deficits exist in the preceding links, they can negatively affect the shoulder. Rehabilitation of shoulder injuries should involve evaluation for and restoration of all kinetic chain deficits that may hinder kinetic chain function. Rehabilitation programs focused on eliminating kinetic chain deficits, and soreness should follow a proximal to distal rationale where lower extremity impairments are addressed in addition to the upper extremity impairments. A logical progression focusing on flexibility, strength, proprioception, and endurance with kinetic chain influence is recommended.

  1. Kinetic chain rehabilitation: a theoretical framework.

    Science.gov (United States)

    Sciascia, Aaron; Cromwell, Robin

    2012-01-01

    Sequenced physiologic muscle activations in the upper and lower extremity result in an integrated biomechanical task. This sequencing is known as the kinetic chain, and, in upper extremity dominant tasks, the energy development and output follows a proximal to distal sequencing. Impairment of one or more kinetic chain links can create dysfunctional biomechanical output leading to pain and/or injury. When deficits exist in the preceding links, they can negatively affect the shoulder. Rehabilitation of shoulder injuries should involve evaluation for and restoration of all kinetic chain deficits that may hinder kinetic chain function. Rehabilitation programs focused on eliminating kinetic chain deficits, and soreness should follow a proximal to distal rationale where lower extremity impairments are addressed in addition to the upper extremity impairments. A logical progression focusing on flexibility, strength, proprioception, and endurance with kinetic chain influence is recommended.

  2. Position Paper on Intelligent Supply Chains

    DEFF Research Database (Denmark)

    Møller, Charles

    the concept of Intelligent Supply Chain and to establish an overall perspective based on information management. The claim made here is that the notion of the intelligent enterprise contributes with a new perspective on supply chain management that addresses the current challenges in an industrial supply...... chain. The argument is further that the existing information systems embodied in the standard enterprise information systems (EIS) have an important role in driving the development of modern supply chains though business processes. This is warranted by an analysis of the role of EIS on the development...... of intelligent supply chains. It is concluded that information management is critical to intelligent supply chains and a research agenda is outlined....

  3. The effect of chain flexibility and chain mobility on radiation crosslinking of polymers

    Energy Technology Data Exchange (ETDEWEB)

    Jia Zhen, Sun

    2001-07-01

    Radiation crosslinking of polymers mainly depends on the structure of polymer chain. The flexibility and mobility of chain directly influence the possibility of the reactive radicals recombination. Flexible chain is easier to crosslink than rigid-chain polymer. The latter must be crosslinked at high temperature, as most polymers can only crosslink above their melting point. Structural effect also influences the mechanism of radiation crosslinking of polymers. We find from the results in literature and in our laboratory that, the flexibility chain polymer mainly crosslinked with H type, but the rigid chain polymer mainly crosslinked with Y type. (author)

  4. The effect of chain flexibility and chain mobility on radiation crosslinking of polymers

    Science.gov (United States)

    Jia Zhen, Sun

    2001-01-01

    Radiation crosslinking of polymers mainly depends on the structure of polymer chain. The flexibility and mobility of chain directly influence the possibility of the reactive radicals recombination. Flexible chain is easier to crosslink than rigid-chain polymer. The latter must be crosslinked at high temperature, as most polymers can only crosslink above their melting point. Structural effect also influences the mechanism of radiation crosslinking of polymers. We find from the results in literature and in our laboratory that, the flexibility chain polymer mainly crosslinked with H type, but the rigid chain polymer mainly crosslinked with Y type.

  5. The role of enterprise systems in supply chain networks: a taxonomy of supply chain strategies

    DEFF Research Database (Denmark)

    Møller, Charles

    2006-01-01

    in the supply chain and to choose the right supply chain strategy. The work is based on a comprehensive study of the Supply Chain Management (SCM) and Enterprise Resource Planning (ERP) literature and the study suggests that there is an emerging new research potential for Enterprise Systems (ES) in the supply......This paper proposes a taxonomy for supply chain integration strategies. The taxonomy is based on the contingencies of supply chain network coupling and the Extended Enterprise Systems (EES) architecture in the supply chain. The purpose of this model is to map the portfolio of relations...

  6. Strategy to Enhance International Supply Chain Security

    Science.gov (United States)

    2007-07-01

    a strategic plan to enhance the security of the international supply chain , including protocols for the expeditious resumption of the flow of trade...following a transportation disruption or transportation security incident. The Strategy to Enhance International Supply Chain Security exists within a...extensive risk analysis specific to the risk area they cover in the supply chain . Assessments are used to identify the highest risk areas and resources

  7. Evaluating Reverse Supply Chain Efficiency: Manufacturer's Perspective

    DEFF Research Database (Denmark)

    Kumar, M.; Tiwari, M. K.; Wong, K. Y.

    2014-01-01

    The paper aims to illustrate the use of fuzzy data envelopment analysis (DEA) in analyzing reverse supply chain (RSC) performance from the manufacturer's perspective. By using an alternative alpha-cut approach, the fuzzy DEA model was converted into a crisp linear programming problem, thereby...... usually ensures an environmentally friendly supply chain network, companies which have implemented RSC techniques since a longer duration do not necessarily have a more efficient supply chain in general....

  8. Supply Chain Performance Evaluation: Trends and Challenges

    OpenAIRE

    Ezutah U. Olugu; Kuan Y. Wong

    2009-01-01

    Problem statement: In todays manufacturing world, globalization policies and rejuvenation have created a more intensive competition amongst manufacturers. On the other hand, manufacturers have turned to the option of adopting innovative technologies, process re-engineering and strategies such as efficient supply chain management to achieve a sustainable competitive advantage. Effective supply chain performance measurement has been identified as a key issue towards efficient supply chain manag...

  9. PRINCIPLES OF THE SUPPLY CHAIN PERFORMANCE MEASUREMENT

    OpenAIRE

    BEATA ŒLUSARCZYK; SEBASTIAN KOT

    2012-01-01

    Measurement of performance in every business management is a crucial activity allowing for effectiveness increase. The lack of suitable performance measurement is especially noticed in complex systems as supply chains. Responsible persons cannot manage effectively without suitable set of measures those are base for comparison to previous data or effects of other supply chain functioning. The analysis shows that it is very hard to find balanced set of supply chain performance measures those sh...

  10. Finding gold in the supply chain.

    Science.gov (United States)

    Caudle, Allen

    2009-12-01

    To optimize supply chain performance and achieve savings that enhance the bottom line, hospitals should: Generate purchase orders for every item purchased. Ensure the organization is protected from undue vendor influence. Keep track of where supply chain dollars are going. Review contracts regularly to ensure competitiveness. Have a contract for each product category. Buy only what the organization is sure to use. Get rid of excess inventory. Develop a strategic plan for continued supply chain savings.

  11. Toc Approach for Supply Chain Performance Enhancement

    OpenAIRE

    Brijesh Ainapur; Ritesh Singh; P.R.Vittal

    2011-01-01

    Many foundries are operating at lower levels than the installed capacities. Study of 56 foundries acrossIndia has shown that only 68% of installed capacities are being utilized. This is mainly because of lack ofco-ordination among the supply chain partners. This study is an effort in identifying these gaps using TOCapproach which will help in supply chain performance enhancement.Field of Supply Chain Management witnessed rapid growth in recent past and proved to be a successfultool for organi...

  12. Supply chain integration:challenges and solutions

    OpenAIRE

    Sweeney, Edward

    2011-01-01

    Since its introduction by management consultants in the early 1980s, supply chain management (SCM) has been primarily concerned with the integration of processes and activities both within and between organisations. The concept of supply chain integration (SCI) is based on documented evidence that suggests that much of the waste throughout businesses is a consequence of fragmented supply chain configurations. However, there is also evidence to suggest that the achievement of higher levels of ...

  13. Parallel Computing Properties of Tail Copolymer Chain

    Directory of Open Access Journals (Sweden)

    Hong Li

    2013-08-01

    Full Text Available The properties of a AB diblock copolymer chain are calculated by Monte Carlo methods. Monomer A contacting to the surface has an adsorption energy E=-1 and monomer B E= 0. The polymer chain is simulated by self-avoiding walk in simple cubic lattice. The adsorption properties and the conformation properties of the polymer chain are computed by using message passing interface (MPI. The speedup is close to linear speedup by parallel computing independent samples.    

  14. Collaborative Planning in Modern Supply Chain

    OpenAIRE

    Nýdlová, Olga

    2009-01-01

    This master thesis describes and proves how companies can improve their operational performance and supplier relationships by using modern collaborative and planning practices, specifically the Collaborative Planning Forecasting and Replenishment (CPFR) concept. The theoretical part depicts main developments in supply chain planning over time, shows common challenges in the world of supply chain and offers possible solutions in terms of collaborative supply chain planning practices. The pract...

  15. Responsive supply chain: modeling and simulation

    Directory of Open Access Journals (Sweden)

    Amit Kumar Sinha

    2015-06-01

    Full Text Available Unexpected occurrence like natural calamity, abruptly change in customer demands, upgradation of technologies, necessity of compatible suppliers etc. is the most challenging issues even for efficient global supply chain management. Therefore, modeling of responsive supply chain is an emerging technology for sustaining any firm/industry in future competitive environment. In this paper, an attempt has been made to not only analyze the performance of efficient supply chain management but also how to improve the performance of existing supply chain with the objective of developing a modeling of responsive supply chain management. The complexity of the model is also highlighted with the help of numerical example. This paper also explores the possibility to mathematical modeling of the responsive supply chain which will be an emerging topic for researchers and practitioners. The modeling of responsive supply chain can be employed as a competitive strategy for e-commerce, green supply chain, and compatible supplier selection problem. The another salient feature of this paper is that a distinct comparative literature review of the lean, agile, efficient, and responsive supply chain management has been presented.

  16. Towards traceability in cocoa - chocolate supply chain

    OpenAIRE

    Syahruddin, Normansyah

    2011-01-01

    The multi – events of food alerts and food risks which occurred in a lengthy period and various locations, grows concern of consumers to question the safety of the food that they consumed. For food producers, occurrences of food alert forced them to review their supply chain to identify what went wrong in their supply chain. To do this, they need a good traceability system that capable in revealing the problems occurred along the chains. In general, a typical food supply chain is consists of ...

  17. Metastability of exponentially perturbed Markov chains

    Institute of Scientific and Technical Information of China (English)

    陈大岳; 冯建峰; 钱敏平

    1996-01-01

    A family of irreducible Markov chains on a finite state space is considered as an exponential perturbation of a reducible Markov chain. This is a generalization of the Freidlin-Wentzell theory, motivated by studies of stochastic Ising models, neural network and simulated annealing. It is shown that the metastability is a universal feature for this wide class of Markov chains. The metastable states are simply those recurrent states of the reducible Markov chain. Higher level attractors, related attractive basins and their pyramidal structure are analysed. The logarithmic asymptotics of the hitting time of various sets are estimated. The hitting time over its mean converges in law to the unit exponential distribution.

  18. Electronic properties of aperiodic quantum dot chains

    Science.gov (United States)

    Korotaev, P. Yu.; Vekilov, Yu. Kh.; Kaputkina, N. E.

    2012-04-01

    The electronic spectral and transport properties of aperiodic quantum dot chains are investigated. The systems with singular continuous energy spectrum are considered: Thue-Morse chain, double-periodic chain, Rudin-Shapiro chain. The influence of electronic energy in quantum dot on the spectral properties, band structure, density of states and spectral resistivity, is discussed. Low resistivity regions correspond to delocalized states and these states could be current states. Also we discuss the magnetic field application as the way to tune electronic energy in quantum dot and to obtain metallic or insulating conducting states of the systems.

  19. Tests for intact and collapsed magnetofossil chains

    Science.gov (United States)

    Egli, R.

    2012-04-01

    In recent years, new techniques for the detection of magnetofossils have been proposed, based on their unique first-order reversal curves (FORC) and ferromagnetic resonance (FMR) signatures. These signatures are related to the non-interacting (FORC) and strongly uniaxial anisotropy (FMR) of isolated chains of magnetic particles. However, little is known about the fate of these signatures in sediments where magnetosome chains collapsed during early diagenetic processes. Due to the impossibility of observing the particle arrangement in-situ, the structure of collapsed chains can only be inferred from TEM images of magnetic extracts and from first-principles consideration on the mechanical stability of magnetosome chains once the biological material around them is dissolved. The magnetic properties of double chains, produced by some strains of cocci, are also not known. According to these considerations, four main magnetofossil structures were taken into consideration: (1) isolated, linear chains, (2) double, half-staggered chains, where the gaps of one chain face the magnetosomes in the other chain, (3) double chains with side-to-side magnetosomes, which might result from a "jackknife" type of collapse of a single, long chain, and (4) zig-zag collapsed chains of elongated crystals, where the magnetosome long axes are perpendicular to the chain axis. The collapsed structures might be relevant in sediments where magnetofossils carry a significant part of the remanent magnetization, because chain collapse tends to cancel the original natural remanent magnetization. Detailed models for the hysteretic and anhysteretic properties of structures (1-4) have been calculated by taking realistic distributions of magnetosome size, elongation, and spacing into account, as inferred from a number of published TEM observations. Model calculations took a total of >2 years continuous running time on two computers in an effort to obtain realistic results, which are shown here for the

  20. Lymphoplasmacytic lymphoma causing light chain cast nephropathy.

    Science.gov (United States)

    Pérez, Nuria S; Garcia-Herrera, Adriana; Rosiñol, Laura; Palos, Lily; Santiago, Evelyn; Espinosa, Gerard; Solé, Manel; Campistol, Josep M; Quintana, Luis F

    2012-01-01

    Plasma cell dyscrasias are frequently associated with kidney disease through the production of monoclonal immunoglobulin but with a diverse set of pathologic renal patterns. While almost all patients with a renal biopsy showing a cast nephropathy have myeloma, kidney involvement associated with pathological immunoglobulin light chains and lymphoma is rare. To our knowledge, this is the first report of a cast nephropathy associated with lymphoplasmacytic lymphoma. We emphasize the relation between light chain deposition and renal dysfunction in this disease with production of light chains. A therapeutic approach that decreases light chain production appears to be warranted in these patients.

  1. Molecular Wring Resonances in Chain Molecules

    DEFF Research Database (Denmark)

    Bohr, Henrik; Brunak, Søren; Bohr, Jakob

    1997-01-01

    It is shown that the eigenfrequency of collective twist excitations in chain molecules can be in the megahertz and gigahertz range. Accordingly, resonance states can be obtained at specific frequencies, and phenomena that involve structural properties can take place. Chain molecules can alter...... their conformation and their ability to function, and a breaking of the chain can result. It is suggested that this phenomenon forms the basis for effects caused by the interaction of microwaves and biomolecules, e.g. microwave assisted hydrolysis of chain molecules....

  2. Effects of enterprise technology on supply chain collaboration: analysis of China-linked supply chain

    Science.gov (United States)

    Li, Ling

    2012-02-01

    Supply chain collaboration has received increasing attention from scholars and practitioners in recent years. However, our understanding of how enterprise information technology facilitates supply chain collaboration is still very limited, especially with regard to Chinese enterprise ownerships such as state-owned firms, joint-venture firms and local village-owned firms. This paper extends the theory established in enterprise information technology (IT) and supply chain collaboration literature and relates it with coordination in China-linked supply chain. Drawing upon an empirical study from 177 Chinese companies, we provide three major findings: (i) uncovered the importance of leveraging enterprise IT through supply chain collaboration; (ii) identified the relationship between enterprise ownership and enterprise technology use and supply chain collaboration in China-linked supply chain and (iii) illustrated effects of supply chain collaborative activities on operational and market performance.

  3. An online algorithm for generating fractal hash chains applied to digital chains of custody

    CERN Document Server

    Bradford, Phillip G

    2007-01-01

    This paper gives an online algorithm for generating Jakobsson's fractal hash chains. Our new algorithm compliments Jakobsson's fractal hash chain algorithm for preimage traversal since his algorithm assumes the entire hash chain is precomputed and a particular list of Ceiling(log n) hash elements or pebbles are saved. Our online algorithm for hash chain traversal incrementally generates a hash chain of n hash elements without knowledge of n before it starts. For any n, our algorithm stores only the Ceiling(log n) pebbles which are precisely the inputs for Jakobsson's amortized hash chain preimage traversal algorithm. This compact representation is useful to generate, traverse, and store a number of large digital hash chains on a small and constrained device. We also give an application using both Jakobsson's and our new algorithm applied to digital chains of custody for validating dynamically changing forensics data.

  4. Supply Chain Systems Architecture and Engineering Design: Green-field Supply Chain Integration

    OpenAIRE

    Radanliev, Petar

    2015-01-01

    This paper developed a new theory for supply chain architecture, and engineering design that enables integration of the business and supply chain strategies. The architecture starts with individual supply chain participants and derives insights into the complex and abstract concept of green-field integration design. The paper presented a conceptual system for depicting the interactions between business and supply chain strategy engineering. The system examines the decisions made when engineer...

  5. Geometry behind chordal Loewner chains

    CERN Document Server

    Contreras, Manuel D; Gumenyuk, Pavel

    2010-01-01

    Loewner Theory is a deep technique in Complex Analysis affording a basis for many further important developments such as the proof of famous Bieberbach's conjecture and well-celebrated Schramm's Stochastic Loewner Evolution (SLE). It provides analytic description of expanding domains dynamics in the plane. Two cases have been developed in the classical theory, namely the {\\it radial} and the {\\it chordal} Loewner evolutions, referring to the associated families of holomorphic self-mappings being normalized at an internal or boundary point of the reference domain, respectively. Recently there has been introduced a new approach [arXiv:0807.1594v1, arXiv:0807.1715v1, arXiv:0902.3116v1] bringing together, and containing as quite special cases, radial and chordal variants of Loewner Theory. In the framework of this approach we address the question what kind of systems of simply connected domains can be described by means of Loewner chains of chordal type. As an answer to this question we establish a necessary and ...

  6. Jetfighter: An Experiential Value Chain Exercise

    Science.gov (United States)

    Sheehan, Norman T.; Gamble, Edward N.

    2010-01-01

    Value chain analysis is widely taught in business schools and applied by practitioners to improve business performance. Despite its ubiquity, many students struggle to understand and apply value chain concepts in practice. JetFighter uses a complex manufacturing process (making intricate paper planes) to provide students an opportunity to enhance…

  7. The Future of Resilient Supply Chains

    DEFF Research Database (Denmark)

    Donadoni, Mattia; Roden, Sinéad; Scholten, Kirstin

    This research aims to advance theoretical understanding around the management of supply chain disruptions through a multi-stage Delphi study on supply chain resilience. Stage one focused on polling academic experts followed by a second stage with practitioners from automotive, electronics and food...

  8. Achieving Supply Chain Integration within Construction Industry

    Directory of Open Access Journals (Sweden)

    Peter McDermotti

    2012-11-01

    Full Text Available The main driver behind the adoption of supply chain management (SCM philosophy into the construction industry was the successes within other industry sectors. SCM can be defined as network of different organisations, linked upstream and downstream in a chain, aiming to produce quality and value in the services and products for the end consumers through integrated processes and activities. In order to achieve the optimised level of integration of the whole supply chain, the industry has responded in various forms. This paper will discuss different initiatives by the researchers,construction industry,and the UK government in order to achieve optimal level of supply chain integration. This paper will discuss the concept of aggregation,and also look at other supply chain integration related concepts including client-led supply chain, knowledge about the whole supply chain, effects of procurement on integration of supply chain, etc. The paper will give a brief overview and initial findings of a project undertaken by the authors, and also include examples from the UK construction industry on bundling of the supply and demand.

  9. Design Principles for Closed Loop Supply Chains

    NARCIS (Netherlands)

    H.R. Krikke (Harold); C.P. Pappis (Costas); G.T. Tsoulfas; J.M. Bloemhof-Ruwaard (Jacqueline)

    2001-01-01

    textabstractIn this paper we study design principles for closed loop supply chains. Closed loop supply chains aim at closing material flows thereby limiting emission and residual waste, but also providing customer service at low cost. We study 'traditional' and 'new' design principles known in the l

  10. A modeling framework for supply chain simulation

    NARCIS (Netherlands)

    van der Zee, D.J.; van der Vorst, J.G.A.J.

    2002-01-01

    In many industries logistic optimization on a company scale is no longer sufficient to meet the competition. Nowadays, competition takes place between supply chains. Intrinsic to the concept and success of a supply chain is the tuning of the activities of the companies involved. Given the complexity

  11. Using Games to Teach Markov Chains

    Science.gov (United States)

    Johnson, Roger W.

    2003-01-01

    Games are promoted as examples for classroom discussion of stationary Markov chains. In a game context Markov chain terminology and results are made concrete, interesting, and entertaining. Game length for several-player games such as "Hi Ho! Cherry-O" and "Chutes and Ladders" is investigated and new, simple formulas are given. Slight…

  12. Towards effective food chains : models and applications

    NARCIS (Netherlands)

    Trienekens, J.H.; Top, J.L.; Vorst, van der J.G.A.J.; Beulens, A.J.M.

    2010-01-01

    Food chain management research can help in the analysis and redesign of value creation and the product flow throughout the chain from primary producer down to the consumer. The aim is to meet consumer and societal requirements effectively at minimal cost. In the Wageningen UR strategic research prog

  13. Operational excellence in logistics and supply chains

    OpenAIRE

    2015-01-01

    This volume contains research contributions by an international group of authors focusing on innovative models to optimize logistics and supply chains at an operational level. They address process efficiency and data-related aspects. Supply chain security insights are also given.

  14. Current Control Strategy of Chain Circuit STATCOM

    Institute of Scientific and Technical Information of China (English)

    WANG Xuan; FU Jian; TENG Letian; SUN Lijing; ZHAO Ruibin; WU Shouyuan; DENG Zhanfeng

    2012-01-01

    In order to study the current control strategy based on the chain circuit static synchronous compensator (STATCOM) dynamic model and the design control system with good stability and tracking accuracy, this paper applies the chain circuit STATCOM small signal AC model, and proposes the following assumptions:

  15. On robustness in food supply chain networks

    NARCIS (Netherlands)

    Vlajic, J.V.; Vorst, van der J.G.A.J.; Hendrix, E.M.T.

    2010-01-01

    Purpose: Today's business environment is characterized by challenges of strong global competition where companies tend to achieve leanness and maximum responsiveness to customer demand. Lean supply chain networks are vulnerable to all kind of disruptions. For food supply chain networks (FSCNs), due

  16. Using management information in broiler supply chains

    NARCIS (Netherlands)

    Yassin, H.

    2012-01-01

    The Dutch broiler supply chain involves several interdependent firms such as breeding and feed companies, rearing farms, breeder farms, broiler hatcheries and broiler farms. To stay competitive and sustain continuity, evaluation of production at each level of the chain is crucial. Good quality data

  17. Localized Lymph Node Light Chain Amyloidosis

    Directory of Open Access Journals (Sweden)

    Binod Dhakal

    2015-01-01

    Full Text Available Immunoglobulin-derived light chain amyloidosis can occasionally be associated with localized disease. We present a patient with localized lymph node light chain amyloidosis without an underlying monoclonal protein or lymphoproliferative disorder and review the literature of lymph node amyloidosis discussing work-up and risk factors for systemic progression.

  18. Waste Reduction in Fresh Food Supply Chains

    DEFF Research Database (Denmark)

    Kaipia, Riikka; Loikkanen, Lauri; Dukovska-Popovska, Iskra

    2011-01-01

    The paper studies a well-known phenomenon, information sharing in supply chains, in a new context, fresh foods, with a specific goal, supporting sustainable performance in the supply chain. Fresh foods are important for retail stores, representing around half of retail sales, but form a challenging...

  19. Molecular dynamics studies of entangled polymer chains

    NARCIS (Netherlands)

    Bulacu, Monica Iulia

    2008-01-01

    The thesis presents three molecular dynamics studies of polymeric ensembles in which the chain entanglement plays the major role in the internal dynamics of the system. A coarse-grained model is used for representing the polymer chains as strings of beads connected by finite-extensible springs. In a

  20. Bethe vectors for XXX-spin chain

    Science.gov (United States)

    Burdík, Čestmír; Fuksa, Jan; Isaev, Alexei

    2014-11-01

    The paper deals with algebraic Bethe ansatz for XXX-spin chain. Generators of Yang-Baxter algebra are expressed in basis of free fermions and used to calculate explicit form of Bethe vectors. Their relation to N-component models is used to prove conjecture about their form in general. Some remarks on inhomogeneous XXX-spin chain are included.

  1. Qualitative methodology for efficient food chain design

    NARCIS (Netherlands)

    Apaiah, R.K.; Hendrix, E.M.T.; Meerdink, G.; Linnemann, A.R.

    2005-01-01

    This paper presents a methodology to efficiently design food supply chains. The goals of quality, cost and environmental load are looked at independently of each other. Food chains are made up of links and are designed to deliver a particular product with consumer-specified attributes. These attribu

  2. Synchronize Your Supply Chain with RFID

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    1 Executive Summary Driving efficiencies throughout your supply chain and increasing the velocity of items through the supply chain from creation to consumer is more than a business mandate today; it’s a matter of business survival. If your company doesn’t do it, your competition will. Radio Frequency Identification (RFID) is a true next-generation

  3. Cooperation and profit allocation in distribution chains

    NARCIS (Netherlands)

    Guardiola, L.A.; Meca, A.; Timmer, J.B.

    2005-01-01

    We study the coordination of actions and the allocation of profit in distribution chains under decentralized control. We consider distribution chains in which a single supplier supplies goods for replenishment of stocks of several retailers who, in turn, sell these goods to their own separate market

  4. Extremal hexagonal chains concerning largest eigenvalue

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In this paper, we define a roll-attaching operation of a hexagonal chain, and prove Gutman's conjecture affirmatively by using the operation. The idea of the proof is also applicable to the results concerning extremal hexagonal chains for the Hosoya index and Merrifield-Simmons index.

  5. Effective food supply chains; generating, modelling and evaluating supply chain scenarios

    NARCIS (Netherlands)

    Vorst, van der J.G.A.J.

    2000-01-01

    Logistical co-ordination in FMCG supply chains

    The overall objectives of the research described in this thesis were to obtain insight into the applicability of the concept Supply Chain Management (SCM) in food supply chains (SCs) from a logistical point of view, and to find an efficient and

  6. A conceptual framework for supply chain governance: An application to agri-food chains in China

    NARCIS (Netherlands)

    Zhang, X.Y.; Aramyan, L.H.

    2009-01-01

    Purpose - Chinese agri-food chains consist of the millions of small scale farmers, who are not well structured and organized in the supply chain. Owing to market liberalization and globalization, one of the most challenging issues along agri-food chains in China is becoming the issue of how to link

  7. Teaching Lean Six Sigma within a Supply Chain Context: The Airplane Supply Chain Simulation

    Science.gov (United States)

    Ellis, Scott C.; Goldsby, Thomas J.; Bailey, Ana M.; Oh, Jae-Young

    2014-01-01

    Lean six sigma is a management methodology that firms can employ to achieve substantial improvement in supply chain performance. However, few pedagogical exercises facilitate students' use of a comprehensive set of lean six sigma principles within a supply chain context. We describe the Airplane Supply Chain Simulation that helps students…

  8. Integrating product design into the supply chain

    DEFF Research Database (Denmark)

    Khan, Omera; Stolte, Terje; Creazza, Alessandro

    2016-01-01

    of opportunities and challenges when integrating product design and the supply chain and subsequently a step-by-step guide is developed to address these. Practical Implications: The research provides key recommendations to companies on how to create competitive capabilities by integrating product design...... into the supply chain. Originality/Value: This paper provides novel insights to both practitioners and researchers. For practitioners detailed recommendations are given on how they can maximise benefits through integrating product design into the supply chain. The RBV has been harnessed to highlight how......Purpose: The aim of the research is to illustrate how companies can create competitive capabilities through integration of product design into the supply chain. In doing so the paper reveals the challenges and the opportunities that companies face when integrating product design and supply chain...

  9. Direct current hopping conductance along DNA chain

    Institute of Scientific and Technical Information of China (English)

    Ma Song-Shan; Xu Hui; Liu Xiao-Liang; Li Ming-Jun

    2007-01-01

    This paper proposes a model of direct current(DC) electron hopping transport in DNA,in which DNA is considered as a binary one-dimensional disordered system.To quantitatively study the DC conductivity in DNA,it numerically calculates the DC conductivity of DNA chains with difierent parameter values.The result shows that the DC conductivity of DNA chain increases with the increase of temperature.And the conductivity of DNA chain is depended on the probability P.which represents the degree of compositional disorder in a DNA sequence to some extent.For P<0.5,the conductivity of DNA chain decreases with the increase of P,while for P≥0.5,the conductivity increases with the increase of p.The DC conductivity in DNA chain also varies with the change of the electric field,it presents non-Ohm's law conductivity characteristics.

  10. Chain graph models and their causal interpretations

    DEFF Research Database (Denmark)

    Lauritzen, Steffen Lilholt; Richardson, Thomas S.

    2002-01-01

    the equilibrium distributions of dynamic models with feed-back. These dynamic interpretations lead to a simple theory of intervention, extending the theory developed for directed acyclic graphs. Finally, we contrast chain graph models under this interpretation with simultaneous equation models which have......Chain graphs are a natural generalization of directed acyclic graphs and undirected graphs. However, the apparent simplicity of chain graphs belies the subtlety of the conditional independence hypotheses that they represent. There are many simple and apparently plausible, but ultimately fallacious......, interpretations of chain graphs that are often invoked, implicitly or explicitly. These interpretations also lead to flawed methods for applying background knowledge to model selection. We present a valid interpretation by showing how the distribution corresponding to a chain graph may be generated from...

  11. Structural repertoire of immunoglobulin λ light chains

    KAUST Repository

    Chailyan, Anna

    2011-03-01

    The immunoglobulin λ isotype is present in nearly all vertebrates and plays an important role in the human immune system. Despite its importance, few systematic studies have been performed to analyze the structural conformation of its variable regions, contrary to what is the case for κ and heavy chains. We show here that an analysis of the structures of λ chains allows the definition of a discrete set of recurring conformations (canonical structures) of their hypervariable loops and, most importantly, the identification of sequence constraints that can be used to predict their structure. We also show that the structural repertoire of λ chains is different and more varied than that of the κ chains, consistently with the current view of the involvement of the two major light-chain families in complementary strategies of the immune system to ensure a fine tuning between diversity and stability in antigen recognition. © 2011 Wiley-Liss, Inc.

  12. Quantum Markov Chain Mixing and Dissipative Engineering

    DEFF Research Database (Denmark)

    Kastoryano, Michael James

    2012-01-01

    This thesis is the fruit of investigations on the extension of ideas of Markov chain mixing to the quantum setting, and its application to problems of dissipative engineering. A Markov chain describes a statistical process where the probability of future events depends only on the state...... of the system at the present point in time, but not on the history of events. Very many important processes in nature are of this type, therefore a good understanding of their behaviour has turned out to be very fruitful for science. Markov chains always have a non-empty set of limiting distributions...... (stationary states). The aim of Markov chain mixing is to obtain (upper and/or lower) bounds on the number of steps it takes for the Markov chain to reach a stationary state. The natural quantum extensions of these notions are density matrices and quantum channels. We set out to develop a general mathematical...

  13. IMPLEMENTING SUSTAINABILITY INTO SUPPLY CHAIN OPERATIONS

    DEFF Research Database (Denmark)

    Jørsfeldt, Lilyana Makarowa

    2016-01-01

    Sustainability is acknowledged as a top strategic agenda by many global companies. As increasing globalization and outsourcing trends shift competition from single company affairs to competition among supply chains, the implementation of sustainability within companies’ supply chain operations...... of sustainable supply chain management SSCM in practice. This study aims to explore in detail the implementation of sustainability in ongoing supply chain operations. Specifically, it investigates how a company approaches the implementation of sustainability in different areas of its supply chain operations...... functions and across the organizations involved in the supply chain—to achieve sustainability deployment. The outcomes of the study are as follows: (1) Conceptual frameworks are developed based on empirical data from the case study. These frameworks cover three different levels of the business system...

  14. The Tax-Efficient Supply Chain

    DEFF Research Database (Denmark)

    Webber, Stuart

    2011-01-01

    Many multinational enterprises are restructuring supply chains to reduce their cost structures. As trade barriers fall and communications technologies improve, it has become easier and more cost-effective to manage business operations across international borders. This has motivated businesses...... their supply chains, and they should endeavor to maximize net income when doing so. This recommendation differs from the great majority of supply chain literature, which has generally recommended that businesses seek to minimize pretax costs. One of the most important activities for both supply chain and tax...... -- specifically a variety of legal organizations within the MNE -- to determine the best opportunities for integrated supply chain and income tax planning. This article also identifies a number of tax issues firms need to consider when making these important decisions....

  15. Research Methodologies in Supply Chain Management

    DEFF Research Database (Denmark)

    Kotzab, Herbert

    While supply chain management has risen to great prominence in recent year, there are hardly related developments in research methodologies. Yet, as supply chains cover more than one company, one central issue is how to collect and analyse data along the whole or relevant part of the supply chain....... Within the 36 chapters 70 authors bring together a rich selection of theoretical and practical examples of how research methodologies are applied in supply chain management. The book contains papers on theoretical implications as well as papers on a range of key methods, such as modelling, surveys, case...... studies or action research. It will be of great interest to researchers in the area of supply chain management and logistics, but also to neighbouring fields, such as network management or global operations....

  16. Environmental management the supply chain perspective

    CERN Document Server

    Wong, Christina W Y; Lun, Y H Venus; Cheng, T C E

    2015-01-01

    In view of the increasing quest for environmental management in businesses, this book provides a good reference to firms to understand how they may manage their supply chains to improve business and environmental performance. The book consists of six chapters covering such topics as environmental management, environmental management practices with supply chain efforts, collaborative environmental management, organizational capabilities in environmental management, environmental disclosure, and closed-loop supply chains. The book presents theory-driven discussions on the link between environmental management and business performance in the context of supply chain management. The book will be useful for firms to learn from the research findings and real-life cases to develop plans to implement environmental management practices jointly with supply chain partners.

  17. Supply Chain Management in Industrial Symbiosis Networks

    DEFF Research Database (Denmark)

    Herczeg, Gabor

    2016-01-01

    Sustainable supply chain management deals with the design and operation of profitable supply chains that also respect limitations on natural resources, do no harm to the environment, and consider the social systems they operate in. In academic research on sustainable supply chain management...... sustainable develop- ment efforts, and emphasize synergistic relations, community, and collabora- tion. This thesis takes an operations and supply chain management perspec- tive on industrial symbiosis networks. More specifically, the thesis elaborates on the collaborative and competitive characteristics......-product allocation strategies, which turn out to have different requirements and consequences for the organization and facilitation of the collaborative efforts. Overall, this thesis aims to ground industrial symbiosis in operations and supply chain management theory. The thesis thereby provides a basis...

  18. Packing of charged chains on toroidal geometries

    Science.gov (United States)

    Yao, Zhenwei; de la Cruz, Monica Olvera

    2013-01-01

    We study a strongly adsorbed flexible polyelectrolyte chain on tori. In this generalized Thomson problem, the patterns of the adsorbed chain are analyzed in the space of the toroidal coordinates and in terms of the orientation of each chain segment. Various patterns are found, including double spirals, disclination-like structures, Janus tori, and uniform wrappings, arising from the long-range electrostatic interaction and the toroidal geometry. Their broken mirror symmetry is quantitatively characterized by introducing an order parameter, an integral of the torsion. The uniform packing, which breaks the mirror symmetry the least, has the lowest value of the order parameter. In addition, it is found that the electrostatic energy of confined chains on tori conforms to a power law regardless of the screening effect in some typical cases studied. Furthermore, we study random walks on tori that generate chain configurations in the large screening limit or at large thermal fluctuation; some features associated with the toroidal geometry are discussed.

  19. Designing value-creating supply chain networks

    CERN Document Server

    Martel, Alain

    2016-01-01

    Focusing on the design of robust value-creating supply chain networks (SCN) and key strategic issues related to the number; location, capacity and mission of supply chain facilities (plants, distribution centers) – as well as the network structure required to provide flexibility and resilience in an uncertain world – this book presents an innovative methodology for SCN reengineering that can be used to significantly improve the bottom line of supply chain dependent businesses. Providing readers with the tools needed to analyze and model value creation activities, Designing Value-Creating Supply Chain Networks examines the risks faced by modern supply chains, and shows how to develop plausible future scenarios to evaluate potential SCN designs. The design methods proposed are based on a visual representation formalism that facilitates the analysis and modeling of SCN design problems, book chapters incorporate several example problems and exercises which can be solved with Excel tools (Analysis tools and So...

  20. Auto component supply chain: a path to global India

    OpenAIRE

    2011-01-01

    Supply chain management works to bring the supplier, the distributor, and the customer into one cohesive process. The Supply Chain Council defined supply chain as ‘Supply Chain: The flow and transformation of raw materials into products from suppliers through production and distribution facilities to the ultimate consumer., and then Sunil Chopra and Meindl, (2001) have define Supply chain management as ‘Supply Chain Management involves the flows between and among stages in a supply chain to m...

  1. Single chain Fab (scFab fragment

    Directory of Open Access Journals (Sweden)

    Brenneis Mariam

    2007-03-01

    Full Text Available Abstract Background The connection of the variable part of the heavy chain (VH and and the variable part of the light chain (VL by a peptide linker to form a consecutive polypeptide chain (single chain antibody, scFv was a breakthrough for the functional production of antibody fragments in Escherichia coli. Being double the size of fragment variable (Fv fragments and requiring assembly of two independent polypeptide chains, functional Fab fragments are usually produced with significantly lower yields in E. coli. An antibody design combining stability and assay compatibility of the fragment antigen binding (Fab with high level bacterial expression of single chain Fv fragments would be desirable. The desired antibody fragment should be both suitable for expression as soluble antibody in E. coli and antibody phage display. Results Here, we demonstrate that the introduction of a polypeptide linker between the fragment difficult (Fd and the light chain (LC, resulting in the formation of a single chain Fab fragment (scFab, can lead to improved production of functional molecules. We tested the impact of various linker designs and modifications of the constant regions on both phage display efficiency and the yield of soluble antibody fragments. A scFab variant without cysteins (scFabΔC connecting the constant part 1 of the heavy chain (CH1 and the constant part of the light chain (CL were best suited for phage display and production of soluble antibody fragments. Beside the expression system E. coli, the new antibody format was also expressed in Pichia pastoris. Monovalent and divalent fragments (DiFabodies as well as multimers were characterised. Conclusion A new antibody design offers the generation of bivalent Fab derivates for antibody phage display and production of soluble antibody fragments. This antibody format is of particular value for high throughput proteome binder generation projects, due to the avidity effect and the possible use of

  2. Structural Origins of Martian Pit Chains

    Science.gov (United States)

    Wyrick, D.; Ferrill, D. A.; Morris, A. P.; Colton, S. L.; Sims, D. W.

    2003-12-01

    Pit craters are circular to elliptical depressions found in alignments (chains), which in many cases coalesce into linear troughs, and are common on the surface of Mars. Pit craters lack an elevated rim, ejecta deposits, or lava flows that are associated with impact craters or calderas. It is generally agreed that these features are formed by collapse into a subsurface cavity. Hypotheses regarding the formation of pit crater chains require development of a substantial subsurface void to accommodate collapse of the overlying sediments. Suggested mechanisms of formation include: collapsed lava tubes, dike swarms, collapsed magma chamber, karst dissolution, fissuring beneath loose material, and dilational faulting. The research described here is intended to constrain current interpretations of pit crater chain formation by analyzing their distribution and morphology. The western hemisphere of Mars was systematically mapped using Mars Orbiter Camera (MOC) images to generate ArcView Geographic Information System (GIS) coverages. All visible pit crater chains were mapped, including their orientations and associations with other structures. We found that pit chains commonly occur in areas that show regional extension or local fissuring. There is a strong correlation between pit chains and fault-bounded grabens. Frequently, there are transitions along strike from (i) visible faulting to (ii) faults and pits to (iii) pits alone. We performed a detailed quantitative analysis of pit crater morphology using MOC narrow angle images, Thermal Emission Imaging System (THEMIS) visual images and Mars Orbiter Laser Altimeter (MOLA) data. This allowed us to interpret a pattern of pit chain evolution and calculate pit depth, slope, and volume. The information collected in the study was then compared with non-Martian examples of pit chains and physical analog models. We evaluated the various mechanisms for pit chain development based on the data collected and conclude that dilational

  3. Virtualization of work in global supply chains

    Directory of Open Access Journals (Sweden)

    Sabina Wyrwich-Płotka

    2016-12-01

    Full Text Available Background: The paper is devoted to the notion and benefits of implementing virtual work in global supply chains. Virtual work must be understood as an intentional activity of a human being, aimed at rendering services (tangible and intangible, by means of ITC tools, performed in a distance from the traditional place of work, in a mobile manner. The empirical research were conducted on the basis of 4 case studies of global leaders of supply chains, which in accordance with M. Fisher's classification, represent two types. The case studies confirmed the positive influence of virtual work both in effective and flexible supply chains. Favourable market and technological conditions and increasing awareness of benefits of virtual work will make it more and more widespread in companies comprising global supply chains. The aim of the study is to demonstrate the cause and effect relationships between virtual work and competitiveness of efficient and flexible supply chain. Methods: The paper is based on the available recent scientific-theoretical research and publication.  The authors analyzed 4 enterprises in Poland. The enterprises representing a flexible or an effective supply chain, either using or not a virtual work. The study carried out the authors had the form of individual interviews. The authors used case studies to show that virtual work brings notable benefits in an effective and flexible supply chain.  Results: Based on these case studies, the authors demonstrated reasons to implement virtual work in selected enterprises. The reasons to implement virtual work are determinants of possible achieve economies in effective and flexible supply chain Conclusions: The examined case studies show that virtual work brings different benefits. In the effective supply chain, virtual workers enable to increase effectiveness and financial results for example. In the flexible supply chain the virtual work can be a way to maintain and build long

  4. Fresh fish distribution chains: An analysis of three Danish and three Australian chains

    DEFF Research Database (Denmark)

    Frederiksen, Marco Thorup; Bremner, Allan

    2001-01-01

    . Traceability is a most important issue in the high value product chains in Australia. No information technology methods, were in evidence. In the Danish chains, nearly all traceability was lost after the collector/auction stage and the only evaluation of quality parameters was by inspection.......Information on traceability was gathered for three domestic Danish fish chains typical of the current trading practices in fresh seafood and for three chains exporting products from Australia to Japan. The same standard questionnaires, coupled with personal interviews, were used in all six chains...

  5. Measuring performance at the supply chain level: the role of the chain director

    Directory of Open Access Journals (Sweden)

    Job A.C. De Haan

    2016-05-01

    The findings show when an attempt to implement a PMS at the supply chain level might be appropriate and effective (if a chain exists and has a director, and how the system’s content should be focused on what is needed to improve chain performance (with end customers’ demands as a starting point. The paper highlights the benefits obtained by the other partners if they comply with the best informed supply chain member in the development of the chain’s PMS, as well as how a PMS cannot be developed when none of the partners can be labelled as chain director.

  6. The composite supply chain efficiency model: A case study of the Sishen-Saldanha supply chain

    Directory of Open Access Journals (Sweden)

    Leila L. Goedhals-Gerber

    2016-01-01

    Full Text Available As South Africa strives to be a major force in global markets, it is essential that South African supply chains achieve and maintain a competitive advantage. One approach to achieving this is to ensure that South African supply chains maximise their levels of efficiency. Consequently, the efficiency levels of South Africa’s supply chains must be evaluated. The objective of this article is to propose a model that can assist South African industries in becoming internationally competitive by providing them with a tool for evaluating their levels of efficiency both as individual firms and as a component in an overall supply chain. The Composite Supply Chain Efficiency Model (CSCEM was developed to measure supply chain efficiency across supply chains using variables identified as problem areas experienced by South African supply chains. The CSCEM is tested in this article using the Sishen-Saldanda iron ore supply chain as a case study. The results indicate that all three links or nodes along the Sishen-Saldanha iron ore supply chain performed well. The average efficiency of the rail leg was 97.34%, while the average efficiency of the mine and the port were 97% and 95.44%, respectively. The results also show that the CSCEM can be used by South African firms to measure their levels of supply chain efficiency. This article concludes with the benefits of the CSCEM.

  7. Polyclonal light chains in cerebrovascular disease

    Directory of Open Access Journals (Sweden)

    Patrizia Fiori

    2010-08-01

    Full Text Available Patrizia Fiori1, Maria Giannetti Luigi2, Linda Iurato1, Carminantonio Tammaro3, Gigliola Esposito3, Antonio Monaco11Central Operative Unit of Neurology (Dir. A Monaco, 2Infantile Neuropsychiatry and Social Service (Dir. LM Giannetti, 3Laboratory (Dir. CA Tammaro, ASL AV, Civil Hospital of Ariano Irpino, University of Naples, ItalyAbstract: Altered membrane permeability is a hallmark of inflammation and ischemia with systemic spreading. Renal dysfunction is a risk factor for cardiovascular, cerebrovascular, and metabolic diseases. The aim of the present study was to assess proteinuria and urinary polyclonal light chains in acute stroke and chronic cerebrovascular disease compared with other neurologic diseases. Our results showed significantly increased levels of urinary polyclonal light chains in cerebrovascular disease compared with other neurologic diseases. The highest values of urinary polyclonal κ chains were found in acute stroke compared with chronic cerebrovascular disease and other neurologic diseases, while the level of λ chains was mainly increased in chronic cerebrovascular diseases. The shift to chronic renal failure seems to be signaled by a decreased polyclonal light chain/creatinemia ratio. The absence of a significant correlation with blood pressure and other seric parameters suggests that polyclonal light chains are an early marker of reversible vascular impairment with renal dysfunction before progression to irreversible renal failure and need for dialysis and/or intensive care.Keywords: polyclonal light chains, cerebrovascular disease, renal failure

  8. Observing of chain-schedule stimuli.

    Science.gov (United States)

    Slezak, Jonathan M; Anderson, Karen G

    2014-06-01

    A classical-conditioning account of the processes maintaining behavior under chained schedules entails a backward transmission of conditioned-reinforcement effects. Assessing this process in traditional chain schedules is limited because the response maintained by stimulus onset accompanied by each link in a chain schedule may also be maintained by the primary reinforcer. In the present experiment, an observing response was used to measure the conditioned-reinforcing effects of stimuli associated with a three-link chain variable-time (VT) food schedule, and resistance-to-change tests (extinction and prefeeding) were implemented to examine if a backward transmission of reinforcement effects occur. Four pigeons served as subjects. Observing was maintained by the production of stimuli correlated with links of a three-link chain VT schedule with the middle-link stimulus maintaining the highest rate of observing, followed by the initial-link stimulus and the terminal-link stimulus maintaining the lowest observing rate. Results from resistance-to-change tests of extinction and prefeeding were not supportive of a backward transmission of reinforcement effects and in general, the pattern of resistance-to-change was forward. Based on past and current research, it appears that a backward pattern of relative rate decreases in responses maintained by stimuli correlated with a chain schedule due to disruption (i.e., extinction and prefeeding) is not a ubiquitous process that is evident within different chain-schedule arrangements.

  9. A scaling analysis of a cat and mouse Markov chain

    NARCIS (Netherlands)

    Litvak, Nelly; Robert, Philippe

    2012-01-01

    If ($C_n$) a Markov chain on a discrete state space $S$, a Markov chain ($C_n, M_n$) on the product space $S \\times S$, the cat and mouse Markov chain, is constructed. The first coordinate of this Markov chain behaves like the original Markov chain and the second component changes only when both coo

  10. Study on Green Supply Chain Management Based on Circular Economy

    Science.gov (United States)

    Ying, Jiang; Li-jun, Zhou

    The article starts with circular economy and the connotation of green supply chain, then analyzes the difference between green supply chain and traditional supply chain and elaborates the content of green supply chain management. On that basis, the approach to implement green supply chain management in china shall be put forward.

  11. Ideal-Chain Collapse in Biopolymers

    CERN Document Server

    Neumann, R M

    2000-01-01

    A conceptual difficulty in the Hooke's-law description of ideal Gaussian polymer-chain elasticity is sometimes apparent in analyses of experimental data or in physical models designed to simulate the behavior of biopolymers. The problem, the tendency of a chain to collapse in the absence of external forces, is examined in the following examples: DNA-stretching experiments, gel electrophoresis, and protein folding. We demonstrate that the application of a statistical-mechanically derived repulsive force, acting between the chain ends, whose magnitude is proportional to the absolute temperature and inversely proportional to the scalar end separation removes this difficulty.

  12. The weight of a falling chain, revisited

    CERN Document Server

    Hamm, Eugenio

    2010-01-01

    A vertically hanging chain is released from rest and falls due to gravity on a scale pan. We discuss the various experimental and theoretical aspects of this classic problem. Careful time-resolved force measurements allow us to determine the differences between the idealized and its implementation in the laboratory problem. We observe that, in spite of the upward force exerted by the pan on the chain, the free end at the top falls faster than a freely falling body. Because a real chain exhibits a finite minimum radius of curvature, the contact at the bottom results in a tensional force which pulls the falling part downward.

  13. Environmental Management Initiatives in Product Chains

    DEFF Research Database (Denmark)

    Forman, Marianne; Hansen, Anne Grethe; Jørgensen, Michael Søgaard

    The Environmental Council for Cleaner Products in 2000-2001 initiated a collection of experience from the environmental co-operation in 25 product chains. This collection of experience was to elucidate the concrete co-operation between suppliers, enterprises and purchasers, to go through tools...... and to report on opportunities and barriers for environmental efforts in the entire product chain. This paper aims at giving a comprehensive analysis of the experiences, on the basis of the reporting of the 25 companies and their supply chains (reported by Ettrup and Bauer in 2002. The 25 case studies have been...

  14. Superadiabatic quantum state transfer in spin chains

    Science.gov (United States)

    Agundez, R. R.; Hill, C. D.; Hollenberg, L. C. L.; Rogge, S.; Blaauboer, M.

    2017-01-01

    In this paper we propose a superadiabatic protocol where quantum state transfer can be achieved with arbitrarily high accuracy and minimal control across long spin chains with an odd number of spins. The quantum state transfer protocol only requires the control of the couplings between the qubits on the edge and the spin chain. We predict fidelities above 0.99 for an evolution of nanoseconds using typical spin-exchange coupling values of μ eV . Furthermore, by building a superadiabatic formalism on top of this protocol, we propose an effective superadiabatic protocol that retains the minimal control over the spin chain and further improves the fidelity.

  15. Spectroscopy of element 115 decay chains

    Energy Technology Data Exchange (ETDEWEB)

    Rudolph, Dirk [Lund University, Sweden; Forsberg, U. [Lund University, Sweden; Golubev, P. [Lund University, Sweden; Sarmiento, L. G. [Lund University, Sweden; Yakushev, A. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Andersson, L.-L. [Johannes Gutenberg-Universitaet Mainz, Mainz, Germany; Di Nitto, A. [Johannes Gutenberg-Universitaet Mainz, Mainz, Germany; Duehllmann, Ch. E. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Gates, J. M. [Lawrence Berkeley National Laboratory (LBNL); Gregorich, K. E. [Lawrence Berkeley National Laboratory (LBNL); Gross, Carl J [ORNL; Hessberger, F. P. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Herzberg, R.-D [University of Liverpool; Khuyagbaatar, J. [Johannes Gutenberg-Universitaet Mainz, Mainz, Germany; Kratz, J. V. [Johannes Gutenberg-Universitaet Mainz, Mainz, Germany; Rykaczewski, Krzysztof Piotr [ORNL; Schaedel, M. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Aberg, S. [Lund University, Sweden; Ackermann, D. [GSI-Hemholtzzentrum fur Schwerionenforschung, Darmstadt, Germany; Block, M. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Brand, H. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Carlsson, B. G. [Lund University, Sweden; Cox, D. [University of Liverpool; Derkx, X. [Johannes Gutenberg-Universitaet Mainz, Mainz, Germany; Eberhardt, K. [Johannes Gutenberg-Universitaet Mainz, Mainz, Germany; Even, J. [Johannes Gutenberg-Universitaet Mainz, Mainz, Germany; Fahlander, C. [Lund University, Sweden; Gerl, J. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Jaeger, E. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Kindler, B. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Krier, J. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Kojouharov, I. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Kurz, N. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Lommel, B. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Mistry, A. [University of Liverpool; Mokry, C. [Johannes Gutenberg-Universitaet Mainz, Mainz, Germany; Nitsche, H. [Lawrence Berkeley National Laboratory (LBNL); Omtvedt, J. P. [Paul Scherrer Institut, Villigen, Switzerland; Papadakis, P. [University of Liverpool; Ragnarsson, I. [Lund University, Sweden; Runke, J. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Schaffner, H. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Schausten, B. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Thoerle-Pospiech, P. [Johannes Gutenberg-Universitaet Mainz, Mainz, Germany; Torres, T. [Gesellschaft fur Schwerionenforschung (GSI), Germany; Traut, T. [Johannes Gutenberg-Universitaet Mainz, Mainz, Germany; Trautmann, N. [Johannes Gutenberg-Universitaet Mainz, Mainz, Germany; Tuerler, A. [Paul Scherrer Institut, Villigen, Switzerland; Ward, A. [University of Liverpool; Ward, D. E. [Lund University, Sweden; Wiehl, N. [Johannes Gutenberg-Universitaet Mainz, Mainz, Germany

    2013-01-01

    A high-resolution a, X-ray and -ray coincidence spectroscopy experiment was conducted at the GSI Helmholtzzentrum fu r Schwerionenforschung. Thirty correlated a-decay chains were detected following the fusion-evaporation reaction 48Ca + 243Am. The observations are consistent with previous assignments of similar decay chains to originate from element Z = 115. The data includes first candidates of fingerprinting the decay step Mt --> Bh with characteristic X rays. For the first time, precise spectroscopy allows the derivation of excitation schemes of isotopes along the decay chains starting with elements Z > 112. Comprehensive Monte-Carlo simulations accompany the data analysis. Nuclear structure models provide a first level interpretation.

  16. Kinematics and Dynamics of Roller Chain Drives

    DEFF Research Database (Denmark)

    Fuglede, Niels

    with a clear derivation of the seating and release configurations, as well as the driven sprocket angular position, velocity and discontinuous acceleration. The approximate analysis allows for simple expressions describing the seating and release configurations and shows the influence of main design parameters...... is presented, which also allows for exact sprocket center positions for a chain with a given number of links. Results show that the total chain wrapping length varies periodically with the tooth frequency. These results are of practical importance to both the design, installation and operation of roller chain...

  17. Switching of antiferromagnetic chains with magnetic pulses

    Science.gov (United States)

    Tao, Kun; Polyakov, Oleg P.; Stepanyuk, Valeri S.

    2016-04-01

    Recent experimental studies have demonstrated the possibility of information storage in short antiferromagnetic chains on an insulator substrate [S. Loth et al., Science 335, 196 (2012), 10.1126/science.1214131]. Here, using the density functional theory and atomistic spin dynamics simulations, we show that a local magnetic control of such chains with a magnetic tip and magnetic pulses can be used for fast switching of their magnetization. Furthermore, by changing the position of the tip one can engineer the magnetization dynamics of the chains.

  18. Entanglement in spin-one Heisenberg chains

    CERN Document Server

    Wang, X G; Sun, Z; Li, Y Q; Wang, XiaoGuang; Li, HaiBin; Sun, Zhe; Li, You-Quan

    2005-01-01

    By using the concept of negativity, we study entanglement in spin-one Heisenberg chains. Both the bilinear chain and the bilinear-biquadratic chain are considered. Due to the SU(2) symmetry, the negativity can be determined by two correlators, which greatly facilitate the study of entanglement properties. Analytical results of negativity are obtained in the bilinear model up to four spins and the two-spin bilinear-biquadratic model, and numerical results of negativity are presented. We determine the threshold temperature before which the thermal state is doomed to be entangled.

  19. The Governance of Global Wealth Chains

    DEFF Research Database (Denmark)

    Seabrooke, Leonard; Wigan, Duncan

    and law in institutional economics, and work from economic sociology on network dynamics within markets. This scholarship assists us in highlighting three variables in how Global Wealth Chains are articulated and change according to: (1) the complexity of transactions, (2) regulatory liability and (3...... to highly complex and flexible innovative financial products produced by large financial institutions and corporations. This paper highlights how Global Wealth Chains intersect with value chains and real economies, and provides three brief case studies on offshore shell companies, family property trusts...

  20. Improving construction performance through supply chain management

    Institute of Scientific and Technical Information of China (English)

    王要武; 薛小龙

    2004-01-01

    A typical model of construction supply chain (CSC) is presented firstly. Then the characteristics and problems of CSC are identified. The authors also describe the progress towards adoption of supply chain management (SCM) in the construction industry. Traditional construction management approaches (CMAs) are compared with new SCM-based CMAs. The authors suggest that integrated SCM based on cooperating competition is crucial to improve construction performance. Based on relevant results from related research, a framework for integrated construction supply chain management (CSCM) is developed to guide the effective implementation of SCM in construction.

  1. Optical response of metal nanoparticle chains

    CERN Document Server

    Fung, K H; Fung, Kin Hung

    2006-01-01

    We study the optical responses of metal nanoparticle chains. Multiple scattering calculations are used to study the extinction cross sections of silver nanosphere chains of finite length embedded in a glass matrix. The transmission and reflection coefficients of periodic 2D arrays of silver nanospheres are also calculated to understand the interaction between nanoparticle chains. The results are in agreement with recent experiments. The splitting of plasmon-resonance modes for different polarizations of the incident light are explored. Results on the effect of disorder are also presented.

  2. Supreme: Supply Chain Integration by Reconfigurable Modules

    Science.gov (United States)

    Nishioka, Y.; Kasai, F.; Kamio, Y.

    This paper deals with dynamic supply chain configuration problems for one-of-a-kind production (OKP) environment. We propose an architecture named SUPREME, which supports collaborative planning and scheduling for web-based virtual enterprises. In this architecture, each system is located on the site of the network members as well as on the site of the supply chain coordinator, who performs as an agent configuring and managing the supply chain dynamically. A prototype system of SUPREME is developed and illustrated in order to evaluate effectiveness of the proposed architecture.

  3. Markov chains models, algorithms and applications

    CERN Document Server

    Ching, Wai-Ki; Ng, Michael K; Siu, Tak-Kuen

    2013-01-01

    This new edition of Markov Chains: Models, Algorithms and Applications has been completely reformatted as a text, complete with end-of-chapter exercises, a new focus on management science, new applications of the models, and new examples with applications in financial risk management and modeling of financial data.This book consists of eight chapters.  Chapter 1 gives a brief introduction to the classical theory on both discrete and continuous time Markov chains. The relationship between Markov chains of finite states and matrix theory will also be highlighted. Some classical iterative methods

  4. CONFORMATIONAL PROPERTIES OF STRETCHED POLYETHYLENE CHAIN

    Institute of Scientific and Technical Information of China (English)

    Lin-xi Zhang; De-lu Zhao

    2000-01-01

    When polyethylene chains are stretched, the chains are regarded as being confined in an infinite cylinder with decreasing diameter. The conformational properties of polyethylene chains confined in an infinite cylinder are investigated by using rotational isomeric state model. Using the average conformational energy and entropy and the average length, we can determine the elastic force f, or the fraction of the energy term to the total force fe/f, where fe=(б)/(б)/(б). Comparisons with experimental data are also made. The results of these microscopic calculations are discussed in terms of the macroscopic phenomena of rubber elasticity.

  5. Analyzing effective elements in agile supply chain

    Directory of Open Access Journals (Sweden)

    Babak Jamshidi Navid

    2012-01-01

    Full Text Available Agile supply chain plays an important role on having efficient production planning. There are different factors affecting the efficiency of a supply chain and the attempt of this paper is to find the most important elements in agile supply chain. The proposed model of this paper gathers decision makers' opinions and based on DEMATEL technique determines the most important items. The preliminary results of this survey indicate that we could divide the factors into four groups and two elements including automation and utilization of technical tools of relations and information play the most important roles among other factors.

  6. Spectroscopy of element 115 decay chains.

    Science.gov (United States)

    Rudolph, D; Forsberg, U; Golubev, P; Sarmiento, L G; Yakushev, A; Andersson, L-L; Di Nitto, A; Düllmann, Ch E; Gates, J M; Gregorich, K E; Gross, C J; Heßberger, F P; Herzberg, R-D; Khuyagbaatar, J; Kratz, J V; Rykaczewski, K; Schädel, M; Åberg, S; Ackermann, D; Block, M; Brand, H; Carlsson, B G; Cox, D; Derkx, X; Eberhardt, K; Even, J; Fahlander, C; Gerl, J; Jäger, E; Kindler, B; Krier, J; Kojouharov, I; Kurz, N; Lommel, B; Mistry, A; Mokry, C; Nitsche, H; Omtvedt, J P; Papadakis, P; Ragnarsson, I; Runke, J; Schaffner, H; Schausten, B; Thörle-Pospiech, P; Torres, T; Traut, T; Trautmann, N; Türler, A; Ward, A; Ward, D E; Wiehl, N

    2013-09-13

    A high-resolution α, x-ray, and γ-ray coincidence spectroscopy experiment was conducted at the GSI Helmholtzzentrum für Schwerionenforschung. Thirty correlated α-decay chains were detected following the fusion-evaporation reaction 48Ca + 243Am. The observations are consistent with previous assignments of similar decay chains to originate from element Z=115. For the first time, precise spectroscopy allows the derivation of excitation schemes of isotopes along the decay chains starting with elements Z>112. Comprehensive Monte Carlo simulations accompany the data analysis. Nuclear structure models provide a first level interpretation.

  7. Stochastic Simulation of a Full-Chain Reptation Model with Constraint Release, Chain-Length Fluctuations and Chain Stretching

    DEFF Research Database (Denmark)

    Neergaard, Jesper; Schieber, Jay D.

    1999-01-01

    A self-consistent reptation model that includes chain stretching, chain-length fluctuations, segment connectivity and constraint release is used to predict transient and steady flows. Quantitative comparisons are made with entangledsolution data. The model is able to capture quantitatively all fe...... for differentmolecular weight, the transient and steady-state behavior of the extinction angle, and the stress relaxation in cessation of steady shear flow....

  8. The robust PT-symmetric chain

    CERN Document Server

    Joglekar, Yogesh N

    2010-01-01

    We study the properties of a parity- and time-reversal- (PT) symmetric tight-binding chain of size N with position-dependent hopping amplitude. In contrast to the fragile PT-symmetric phase of a chain with constant hopping and imaginary impurity potentials, we show that, under very general conditions, our model is {\\it always} in the PT-symmetric phase. We numerically obtain the energy spectrum and the density of states of such a chain, and show that they are widely tunable. By studying the size-dependence of inverse participation ratios, we show that although the chain is not translationally invariant, most of its eigenstates are extended. Our results indicate that tight-binding models with non-Hermitian PT-symmetric hopping have a robust PT-symmetric phase and rich dynamics.

  9. Modelling proton transfer in water molecule chains

    CERN Document Server

    Korzhimanov, Artem; Shutova, Tatiana; Samuelsson, Goran

    2011-01-01

    The process of protons transport in molecular water chains is of fundamental interest for many biological systems. Although many features of such systems can be analyzed using large-scale computational modeling, other features are better understood in terms of simplified model problems. Here we have tested, analytically and numerically, a model describing the classical proton hopping process in molecular water chains. In order to capture the main features of the proton hopping process in such molecular chains, we use a simplified model for our analysis. In particular, our discrete model describes a 1D chain of water molecules situated in an external protein channel structure, and each water molecule is allowed to oscillate around its equilibrium point in this system, while the protons are allowed to move along the line of neighboring oxygen atoms. The occurrence and properties of nonlinear solitary transport structures, allowing for much faster proton transport, are discussed, and the possible implications of...

  10. Supply chain risk management; Lieferung mit Risiko

    Energy Technology Data Exchange (ETDEWEB)

    Kersten, Wolfgang; Hohrath, Philipp [Technische Univ. Hamburg-Harburg, Hamburg (Germany). Inst. fuer Logistik und Unternehmensfuehrung; Scholl, Jan [Pleyma GmbH, Hamburg (Germany)

    2010-03-15

    In spite of the high risk involved, about 40 percent of all wind power systems do not have a supply chain risk management. This is due to the supply structures of this relatively young industry. (orig.)

  11. Supply chain configuration concepts, solutions, and applications

    CERN Document Server

    Chandra, Charu

    2016-01-01

    This book discusses the models and tools available for solving configuration problems, emphasizes the value of model integration to obtain comprehensive and robust configuration decisions, proposes solutions for supply chain configuration in the presence of stochastic and dynamic factors, and illustrates application of the techniques discussed in applied studies. It is divided into four parts, which are devoted to defining the supply chain configuration problem and identifying key issues, describing solutions to various problems identified, proposing technologies for enabling supply chain confirmations, and discussing applied supply chain configuration problems. Its distinguishing features are: an explicit focus on the configuration problem an in-depth coverage of configuration models an emphasis on model integration and application of information modeling techniques in decision-making New to this edition is Part II: Technologies, which introduces readers to various technologies being utilized for supply chai...

  12. Analytical calculation of chain length in ferrofluids

    Indian Academy of Sciences (India)

    M Devi; P P Dutta; D Mohanta

    2015-02-01

    The response of a typical ferrofluid (FF) lies in its explicit property of chain formation of magnetic nanoparticles. The most significant magneto-optic (MO) and magneto-viscous (MV) effects of FF are attributed to chaining effect. In the present research, an effort was made to analytically justify the dependence of the structure evolution of FFs on different measurable parameters involved in MO and MV effects. The problem is treated with the help of dimensional analysis and an empirical relation is formulated relating the equilibrium chain length with Verdet coefficient (constant), particle diameter, viscosity of the carrier fluid, particle density, magnetization and shear rate. The formulated relation of chain length is supported by error analysis to yield the uncertainty in the result. The maximum uncertainty in four sets of data is found as ∼0.75.

  13. Electronic structure of heterocyclic ring chain polymers

    NARCIS (Netherlands)

    Brocks, Geert; Tol, Arie

    1999-01-01

    The band gaps, ionization potentials and electron affinities of conjugated chain polymers comprising heterocyclic aromatic rings are studied systematically as a function of atomic substitutions with N, O and S using first principles density functional calculations.

  14. Doping Scheme of Semiconducting Atomic Chains

    Science.gov (United States)

    Toshishige, Yamada; Saini, Subhash (Technical Monitor)

    1998-01-01

    Atomic chains, precise structures of atomic scale created on an atomically regulated substrate surface, are candidates for future electronics. A doping scheme for intrinsic semiconducting Mg chains is considered. In order to suppress the unwanted Anderson localization and minimize the deformation of the original band shape, atomic modulation doping is considered, which is to place dopant atoms beside the chain periodically. Group I atoms are donors, and group VI or VII atoms are acceptors. As long as the lattice constant is long so that the s-p band crossing has not occurred, whether dopant atoms behave as donors or acceptors is closely related to the energy level alignment of isolated atomic levels. Band structures are calculated for Br-doped (p-type) and Cs-doped (n-type) Mg chains using the tight-binding theory with universal parameters, and it is shown that the band deformation is minimized and only the Fermi energy position is modified.

  15. Generalized crested products of Markov chains

    CERN Document Server

    D'Angeli, Daniele

    2010-01-01

    We define a finite Markov chain, called generalized crested product, which naturally appears as a generalization of the first crested product of Markov chains. A complete spectral analysis is developed and the $k$-step transition probability is given. It is important to remark that this Markov chain describes a more general version of the classical Ehrenfest diffusion model. As a particular case, one gets a generalization of the classical Insect Markov chain defined on the ultrametric space. Finally, an interpretation in terms of representation group theory is given, by showing the correspondence between the spectral decomposition of the generalized crested product and the Gelfand pairs associated with the generalized wreath product of permutation groups.

  16. Social network analysis and supply chain management

    Directory of Open Access Journals (Sweden)

    Raúl Rodríguez Rodríguez

    2016-01-01

    Full Text Available This paper deals with social network analysis and how it could be integrated within supply chain management from a decision-making point of view. Even though the benefits of using social analysis have are widely accepted at both academic and industry/services context, there is still a lack of solid frameworks that allow decision-makers to connect the usage and obtained results of social network analysis – mainly both information and knowledge flows and derived results- with supply chain management objectives and goals. This paper gives an overview of social network analysis, the main social network analysis metrics, supply chain performance and, finally, it identifies how future frameworks could close the gap and link the results of social network analysis with the supply chain management decision-making processes.

  17. Large Deviations in Quantum Spin Chain

    CERN Document Server

    Ogata, Yoshiko

    2008-01-01

    We show the full large deviation principle for KMS-states and $C^*$-finitely correlated states on a quantum spin chain. We cover general local observables. Our main tool is Ruelle's transfer operator method.

  18. ERP extension - Supply Chain Management (SCM

    Directory of Open Access Journals (Sweden)

    Vasile LUPSE

    2006-01-01

    Full Text Available This article presents an extension of a ERP (Enterprise Resource Planning, more precisely the Supply Chain Management (SCM, together with some personal considerations and contributions of the authors, regarding the presented concepts.

  19. Service Quality in Supply Chain: A Review

    Directory of Open Access Journals (Sweden)

    Tarun K. Gupta

    2012-08-01

    Full Text Available Economic development of a country generally depends upon the growth amongst its agriculture, manufacture and service sectors. Part of service sector increasing day by day therefore quality of service is very important to maintain the economic growth of a nation. It is very easy to calculate the loss due to poor sale but it is very difficult to calculate the loss due to poor service quality. Good service always built up the confidence of the customer in the firm. In This paper the author has discussed the concept of service quality in supply chain and has given a core review. A three level development of service quality in supply chain has been explored and a relationship has been established between service quality, supply chain and service quality in supply chain.

  20. Multiple impacts in dissipative granular chains

    CERN Document Server

    Nguyen, Ngoc Son

    2014-01-01

    The extension of collision models for single impacts between two bodies, to the case of multiple impacts (which take place when several collisions occur at the same time in a multibody system) is a challenge in Solid Mechanics, due to the complexity of such phenomena, even in the frictionless case. This monograph aims at presenting the main multiple collision rules proposed in the literature. Such collisions typically occur in granular materials, the simplest of which are made of chains of aligned balls. These chains are used throughout the book to analyze various multiple impact rules which extend the classical Newton (kinematic restitution), Poisson (kinetic restitution) and Darboux-Keller (energetic or kinetic restitution) approaches for impact modelling. The shock dynamics in various types of chains of aligned balls (monodisperse, tapered, decorated, stepped chains) is carefully studied and shown to depend on several parameters: restitution coefficients, contact stiffness ratios, elasticity coefficients (...

  1. Qualtiy Issues in Project configured Supply Chains

    DEFF Research Database (Denmark)

    Koch, Christian; Larsen, Casper Schultz

    by configuration by project. In such a setting creating value for the customers and the enterprises becomes dependent of the ability to organise and coordinate in the supply chains. That the configuration is not always successful can be demonstrated by studying the emergence of failures occurring in the supply...... chain. The paper presents case study work done in Danish construction. The method was to observe work at the construction site and interviewing actors following backwards upstream the supply chain to the origin of the failure. The building project followed generated 160 failures over a three month...... stream and then occasionally transform into the material stream. The paper proposes initiatives to strengthen partnerships in supply chains and especially at engineer to order production. The contradiction between the permanent enterprise organisation potentially capable of handling purchasing...

  2. Modelling green and lean supply chains

    DEFF Research Database (Denmark)

    Carvalho, Helena; Govindan, Kannan; Azevedo, Susana G.

    2017-01-01

    the trade-offs between lean and green practices. To illustrate the model application, a case study from an automotive supply chain is presented. Some management practices that are instituted for green or lean benefits have opposite effects on the environmental and economic performance of companies. One......This manuscript proposes a model to support decision making and to help managers identify the best set of green and lean supply chain management practices to improve their eco-efficiency. To attain this objective, a mathematical model based on eco-efficiency concepts is suggested to overcome...... of the main findings of our study is that not all companies belonging to the same supply chain can be absolutely lean or green. There should be compromises in the individual companies’ behaviour so the environmental and economic constraints of the supply chain are both satisfied. The proposed model represents...

  3. Entanglement Enhancement in an XY Spin Chain

    Institute of Scientific and Technical Information of China (English)

    SU Xiao-Qiang

    2011-01-01

    We study evolution of entanglement in an XY-type spin channel and find that the entanglement can be enhanced by the spin channel. The parameter regions of the initial states for different numbers of sites are obtained.Furthermore, we consider a common spin environment coupling to the spin chains and find that the entanglement enhancement can also be implemented only for the chains with the odd numbers of sites.%@@ We study evolution of entanglement in an XY-type spin channel and find that the entanglement can be enhanced by the spin channel.The parameter regions of the initial states for different numbers of sites are obtained.Furthermore,we consider a common spin environment coupling to the spin chains and find that the entanglement enhancement can also be implemented only for the chains with the odd numbers of sites.

  4. Essential tools of supply chain management.

    Science.gov (United States)

    Buddress, L; Raedels, A

    2000-08-01

    At a recent conference, the keynote speaker provoked an incredulous response when he said, "Today, competition among individual firms is dead." He then went on to explain that today, competition is supply chain against supply chain. Whichever firm has the superior supply chain will win out in the marketplace. Given the global marketplace in which we all operate, most of us would agree that his statements are true. How does a firm establish a world-class supply base? What kinds of contracts and agreements are necessary to support the diverse requirements of today's firms? How should a firm select from among the available contract types? These are foundation questions for supply chain management.

  5. How do states condition care chains?

    DEFF Research Database (Denmark)

    Spanger, Marlene; Dahl, Hanne Marlene; Petersson, Elin

    2016-01-01

    In investigating global and regional care chains, scholars have traditionally adopted a sociological bottom-up approach, but more attention has recently been focused on the role of the state. Despite this new attention to states and the ways in which they condition care chains, the existing...... frameworks cannot grasp the complexity of potential struggles and tensions within states and at the various levels of the state. In outlining a broad and tentative analytical framework for exploration of the role of the state in shaping global and regional care chains, this theoretical article combines...... discursive policy analysis with feminist state and multi-level governance theories. Paying attention to the role of the state, we focus on the framing of policy problems that are important for care chains and on potential tensions between different framings within a state and across the different levels...

  6. product chain collaboration and environmental innovations

    DEFF Research Database (Denmark)

    Remmen, Arne; Mosgaard, Mette

    2004-01-01

    The paper  builds upon a case study from a number of electronic companies in Denmark and describes from an organisational perspective how organisations make environmental innovations in the product chain....

  7. Small carbon chains in circumstellar envelopes

    CERN Document Server

    Hargreaves, R J; Bernath, P F

    2014-01-01

    Observations were made for a number of carbon-rich circumstellar envelopes using the Phoenix spectrograph on the Gemini South telescope to determine the abundance of small carbon chain molecules. Vibration-rotation lines of the $\

  8. Supply Chain Challenges among BRICS Countries

    Directory of Open Access Journals (Sweden)

    Pravendra TyagiA ,

    2014-04-01

    Full Text Available in an economic mode for satisfying the all end-users by prompt connectivity and communication between the links of supply chain. In this article efforts have been made to explore the series of challenges in BRICS countries in supply chain connectivity to achieve the revolution of coined word, which is “Broad vision and shared prosperity, also security and prosperity” this paper exposes the impacting key constraints on economic and smooth supply chain execution country wise, specifically Brazil, Russia, India, China, South Africa, also discusses the approaches to overcome the loose poles in supply chain system by enhancing internationalization and globalization ,which relates to quantitative and qualitative strengthening in the field of finance and technology.

  9. Doping Scheme in Atomic Chain Electronics

    Science.gov (United States)

    Toshishige, Yamada

    1997-01-01

    Due to the dramatic reduction in MOS size, there appear many unwanted effects. In these small devices, the number of dopant atoms in the channel is not macroscopic and electrons may suffer significantly different scattering from device to device since the spatial distribution of dopant atoms is no longer regarded as continuous. This prohibits integration, while it is impossible to control such dopant positions within atomic scale. A fundamental solution is to create electronics with simple but atomically precise structures, which could be fabricated with recent atom manipulation technology. All the constituent atoms are placed as planned, and then the device characteristics are deviation-free, which is mandatory for integration. Atomic chain electronics belongs to this category. Foreign atom chains or arrays form devices, and they are placed on the atomically flat substrate surface. We can design the band structure and the resultant Fermi energy of these structures by manipulating the lattice constant. Using the tight-binding theory with universal parameters, it has been predicted that isolated Si chains and arrays are metallic, Mg chains are insulating, and Mg arrays have metallic and insulating phases [1]. The transport properties along a metallic chain have been studied, emphasizing the role of the contact to electrodes [2]. For electronic applications, it is essential to establish a method to dope a semiconducting chain, which is to control the Fermi energy position without altering the original band structure. If we replace some of the chain atoms with dopant atoms randomly, the electrons will see random potential along die chain and will be localized strongly in space (Anderson localization). However, if we replace periodically, although the electrons can spread over the chain, there will generally appear new bands and band gaps reflecting the new periodicity of dopant atoms. This will change the original band structure significantly. In order to overcome

  10. MEASUREMENTS OF CHAIN INTERPENETRATION OF POLYMER GLASSES

    Institute of Scientific and Technical Information of China (English)

    Min-zhi Chen; Xiao-liang Wang; Fang-fang Tao; Qi Xue; Ping-chuan Sun

    2007-01-01

    The concept of entanglement provides the basis of our current understanding of the flow behavior of polymer melts. Current techniques developed to investigate the degree of interpenetration of polymer chains only provide indirectly the information of the degree of entanglement in a relatively large scale (several to tens of nanometer). In this article, we report 1H-NMR spectroscopy with dipolar filters under fast magic angle spinning for probing chain interpenetration of polymer glasses at the molecular level.

  11. Managing growth in higher value food chains

    OpenAIRE

    Knickel, Karlheinz; Münchhausen, von, Susanne; Vilija, Girgzdiene; Virgilius, Skulskis

    2016-01-01

    Higher value food chains tend to converge either towards rather narrow market segments and niches or towards conventionalisation and loss in added value when volumes and turnover start growing more significantly. In this paper we will present the findings from a set of case studies of growth in agri-food chains implemented during 2014 in ten European countries, including in Eastern Europe and Turkey. The comparative analysis will help to better understand different development pathways with t...

  12. Kinetic Chain Rehabilitation: A Theoretical Framework

    OpenAIRE

    Aaron Sciascia; Robin Cromwell

    2012-01-01

    Sequenced physiologic muscle activations in the upper and lower extremity result in an integrated biomechanical task. This sequencing is known as the kinetic chain, and, in upper extremity dominant tasks, the energy development and output follows a proximal to distal sequencing. Impairment of one or more kinetic chain links can create dysfunctional biomechanical output leading to pain and/or injury. When deficits exist in the preceding links, they can negatively affect the shoulder. Rehabilit...

  13. Risk assessment and management logistics chains

    Directory of Open Access Journals (Sweden)

    Vladimir Vikulov

    2014-03-01

    Full Text Available Background: In the context of economic globalization and increasing complexity of economic relations enterprises need methods and techniques to improve and sustain their position on the global market. Integration processes offer business new opportunities, but at the same time present new challenges for the management, including the key objectives of the risk management. Method: On the basis of analysis tools known from the pertinent literature (Supply Chain Management and Supply Chain Risk Management methods, methods of probability theory, methods of risk management, methods of statistics the authors of this paper proposed their own risk assessment method and the method of management of logistics chains. The proposed tool is a specific hybrid of solutions known from the literature. Results: The presented method has been successfully used within the frames of economic-mathematical model of industrial enterprises. Indicators of supply chain risks, including risks caused by supplier are considered in this paper. Authors formed a method of optimizing the level of supply chain risk in the integration with suppliers and customers. Conclusion: Every organization, which starting the process of integration with supplier and customers, needs to use tools, methodologies and techniques for identification of "weak links" in the supply chain. The proposed method allows to fix risk origin places in various links of the supply chain and to identify "weak links" of a logistic chain that may occur in the future. The method is a useful tool for managing not only risks and risk situations, but also to improve the efficiency of current assets management by providing the ability to optimize the level of risk in the current assets management of the industrial enterprise.

  14. Global supply chain: The consolidators’ role

    Directory of Open Access Journals (Sweden)

    Rosa Caiazza

    2016-01-01

    Full Text Available Challenges and opportunities of the global market lead agro-food small and medium firms (SMEs to focus their source of value on production of high quality goods and implementation of flexible and robust supply chains. Despite the relevance of consolidators in the supply chain, few articles demonstrate their role in internationalization strategies of SMEs. In order to fill this literature gap, this article shows factors that affect global success of SMEs and offers some advice to decision makers.

  15. Entanglement oscillations in open Heisenberg chains

    CERN Document Server

    Wang, T; Wang, X; Sun, Zhe; Wang, Ting; Wang, Xiaoguang

    2006-01-01

    We study pairwise entanglements in spin-half and spin-one Heisenberg chains with an open boundary condition, respectively. We find out that the ground-state and the first-excited-state entanglements are equal for the three-site spin-one chain. When the number of sites L>3, the concurrences and negativities display oscillatory behaviors, and the oscillations of the ground-state and the first-excited-state entanglements are out of phase or in phase.

  16. The Governance of Global Wealth Chains

    DEFF Research Database (Denmark)

    Seabrooke, Leonard; Wigan, Duncan

    2017-01-01

    and law in Institutional Economics, and work from Economic Sociology on network dynamics within markets. This scholarship assists us in highlighting three variables in how GWCs are articulated and change according to: (1) the complexity of transactions, (2) regulatory liability, and (3) innovation...... innovative financial products produced by large financial institutions and corporations. This article highlights how GWCs intersect with value chains, and provides brief case examples of wealth chains and how they interact....

  17. Future Research Themes in Supply Chain Management

    DEFF Research Database (Denmark)

    Wieland, Andreas

    2016-01-01

    Guest post on research results published in the article "Mapping the Landscape of Future Research Themes in Supply Chain Management" by Andreas Wieland, Robert Handfield and Christian Durach ( Journal of Business Logistics (2016). Vol. 37, no. 3, pp. 205-212).......Guest post on research results published in the article "Mapping the Landscape of Future Research Themes in Supply Chain Management" by Andreas Wieland, Robert Handfield and Christian Durach ( Journal of Business Logistics (2016). Vol. 37, no. 3, pp. 205-212)....

  18. Theoretical Studies of Relatively Rigid Polymer Chains.

    Science.gov (United States)

    1982-12-01

    energies Chain packing Intermolecular interactions Polarizability Polybenzobisoxazoles Electrical conductivitj 20. ATTRACT (Continue an reverse side if...of these materials, the ordering of the chains, and the mechanical strength of the resulting films or fibers . The basic goals are thus a molecular...be used to prepare films and fibers having unusual strength and thermal stability. They are, however, very nearly intract- able unless some atoms or

  19. Entropy Rate for Hidden Markov Chains with rare transitions

    OpenAIRE

    2010-01-01

    We consider Hidden Markov Chains obtained by passing a Markov Chain with rare transitions through a noisy memoryless channel. We obtain asymptotic estimates for the entropy of the resulting Hidden Markov Chain as the transition rate is reduced to zero.

  20. Impact of supply chain management practices on sustainability

    DEFF Research Database (Denmark)

    Govindan, Kannan; Azevedo, Susana G.; Carvalho, Helena

    2014-01-01

    elimination," "supply chain risk management" and "cleaner production." The following lean, resilient and green supply chain management practices do not have a significant impact on supply chain sustainability: "flexible transportation," "flexible sourcing," "ISO 14001 certification," and "reverse logistics...

  1. Security Modeling on the Supply Chain Networks

    Directory of Open Access Journals (Sweden)

    Marn-Ling Shing

    2007-10-01

    Full Text Available In order to keep the price down, a purchaser sends out the request for quotation to a group of suppliers in a supply chain network. The purchaser will then choose a supplier with the best combination of price and quality. A potential supplier will try to collect the related information about other suppliers so he/she can offer the best bid to the purchaser. Therefore, confidentiality becomes an important consideration for the design of a supply chain network. Chen et al. have proposed the application of the Bell-LaPadula model in the design of a secured supply chain network. In the Bell-LaPadula model, a subject can be in one of different security clearances and an object can be in one of various security classifications. All the possible combinations of (Security Clearance, Classification pair in the Bell-LaPadula model can be thought as different states in the Markov Chain model. This paper extends the work done by Chen et al., provides more details on the Markov Chain model and illustrates how to use it to monitor the security state transition in the supply chain network.

  2. Conformational elasticity theory of chain molecules

    Institute of Scientific and Technical Information of China (English)

    YANG; Xiaozhen

    2001-01-01

    This paper develops a conformational elasticity theory of chain molecules, which is based on three key points: (ⅰ) the molecular model is the rotational isomeric state (RIS) model; (ⅱ) the conformational distribution function of a chain molecule is described by a function of two variables, the end-to-end distance of a chain conformation and the energy of the conformation; (ⅲ) the rule of changes in the chain conformational states during deformation is that a number of chain conformations would vanish. The ideal deformation behavior calculated by the theory shows that the change in chain conformations is physically able to make the upward curvature of the stress-strain curve at the large-scale deformation of natural rubber. With the theory, different deformation behaviors between polymers with different chemical structures can be described, the energy term of the stress in the deformations can be predicted, and for natural rubber the fraction of the energy term is around 13%, coinciding with the experimental results.

  3. Exciton Transfer Integrals Between Polymer Chains

    CERN Document Server

    Barford, W

    2007-01-01

    The line-dipole approximation for the evaluation of the exciton transfer integral, $J$, between conjugated polymer chains is rigorously justified. Using this approximation, as well as the plane-wave approximation for the exciton center-of-mass wavefunction, it is shown analytically that $J \\sim L$ when the chain lengths are smaller than the separation between them, or $J\\sim L^{-1}$ when the chain lengths are larger than their separation, where $L$ is the polymer length. Scaling relations are also obtained numerically for the more realistic standing-wave approximation for the exciton center-of-mass wavefunction, where it is found that for chain lengths larger than their separation $J \\sim L^{-1.8}$ or $J \\sim L^{-2}$, for parallel or collinear chains, respectively. These results have important implications for the photo-physics of conjugated polymers and self-assembled molecular systems, as the Davydov splitting in aggregates and the F\\"orster transfer rate for exciton migration decreases with chain lengths l...

  4. Supply chain design: Some critical questions

    Directory of Open Access Journals (Sweden)

    J. D. Nel

    2010-11-01

    Full Text Available Effective supply chain management (SCM requires organisations to work together in order to satisfy the needs of their end customers. Since organisations have to determine which processes and relationships will best achieve this aim, the design of their supply chains is important. Supply chain design thus forms an integral part of SCM and embodies the supply chain's structure. Unfortunately, too many organisations allow the design of their supply chain to evolve into its current form instead of planning their supply chain design (SCD efforts. The literature is vague on what SCD efforts constitute. This article consists of a comprehensive literature study in which an effort was made to bring more clarity on exactly what purposeful SCD efforts consist of, and some key questions were formulated that organisations could use as a guide in their SCD practices. From these critical questions a conceptual framework has been developed that can be used to determine whether organisations' SCD practices are aligned with organisational objectives. The conceptual framework was tested at two South African organisations to determine if it indeed can be be used to analyse the SCD practices of organisations.

  5. Antiretroviral procurement and supply chain management.

    Science.gov (United States)

    Ripin, David J; Jamieson, David; Meyers, Amy; Warty, Umesh; Dain, Mary; Khamsi, Cyril

    2014-01-01

    Procurement, the country-level process of ordering antiretrovirals (ARVs), and supply chain management, the mechanism by which they are delivered to health-care facilities, are critical processes required to move ARVs from manufacturers to patients. To provide a glimpse into the ARV procurement and supply chain, the following pages provide an overview of the primary stakeholders, principal operating models, and policies and regulations involved in ARV procurement. Also presented are key challenges that need to be addressed to ensure that the supply chain is not a barrier to the goal of universal coverage. This article will cover the steps necessary to order and distribute ARVs, including different models of delivery, key stakeholders involved, strategic considerations that vary depending on context and policies affecting them. The single drug examples given illustrate the complications inherent in fragmented supply and demand-driven models of procurement and supply chain management, and suggest tools for navigating these hurdles that will ultimately result in more secure and reliable ARV provision. Understanding the dynamics of ARV supply chain is important for the global health community, both to ensure full and efficient treatment of persons living with HIV as well as to inform the supply chain decisions for other public health products.

  6. Precast Pearl-Chain concrete arch bridges

    DEFF Research Database (Denmark)

    Halding, Philip Skov; Hertz, Kristian Dahl; Schmidt, Jacob Wittrup

    2015-01-01

    A Pearl-Chain Bridge is a closed-spandrel arch bridge consisting of a number of straight pre-fabricated so called Super-Light Deck elements put together in an arch shape by post-tensioning cables. Several Pearl-Chain arches can be positioned adjacent to each other by a crane to achieve a bridge...... the technology was used. We also study other important components and details in the Pearl-Chain Bridge concept and review the effects of different types of loads. A theoretical case study of a circular 30 m span Pearl-Chain Bridge is presented showing the influence of a number of parameters: The number of post-tensioning......, and gives a large positive bending moment below the load and a smaller negative bending moment in the unloaded side. When the Pearl-Chain Bridge concept is compared to other pre-fabricated arch bridge solutions we find a number of advantages when using Pearl-Chain Bridges: Straight elements, combination...

  7. Comparative Evaluation of Supply Chain Management Strategies: A Simulation Approach

    OpenAIRE

    Chan, FTS

    2002-01-01

    Supply chain management has become one of the most important sources of competitive advantage in different industries. For years, researchers have investigated the various processes within supply chain. There has been an increasing attention placed on performance, design and analysis of supply chain. However, the supply chain is a complex model so it is difficult to analyze the performance of a supply chain philosophically. To evaluate the control mechanism for a supply chain, simulation is o...

  8. THE ROLE OF SUPPLY CHAIN COLLABORATION ON SUSTAINABLE SUPPLY CHAIN MANAGEMENT PERFORMANCE

    OpenAIRE

    2015-01-01

    Sustainable supply chain management and collaboration have taken big attention from academicians and practitioners. The extensive literature review is conducted to analyse the relationship between Sustainable Supply Chain Management and collaboration and its effects on performance of SSCM dimensions. Then, a framework is proposed to explain the relationship between sustainable supply chain management and collaboration. For further studies the proposed framework should be tested empirically.

  9. Halalan Toyyiban Supply Chain The New Insights in Sustainable Supply Chain Management

    OpenAIRE

    Omar, Emi Normalina; Jaafar, Harlina Suzana; Osman, Muhamad Rahimi; Nasruddin, Faisol

    2013-01-01

    Purpose: In today’s highly competitive world scenario, in order for logistics and supply chain firms to be successful, resilient and sustainable, halalan-toyyiban supply chain could be the new insight in assisting the firm. Hence, the purpose of this study is to provide a practical definition for developing an effective supply chain through halalan toyyiban processes and comparing the similarities and differences of the halal term. Design/methodology/approach: The analysis is develo...

  10. Financing the End-to-end Supply Chain: A Reference Guide to Supply Chain Finance

    OpenAIRE

    Templar, Simon; Hofmann, Erik; Findlay, Charles

    2016-01-01

    Financing the End to End Supply Chain provides readers with a real insight into the increasingly important area of supply chain finance. It demonstrates the importance of the strategic relationship between the physical supply of goods and services and the associated financial flows. The book provides a clear introduction, demonstrating the importance of the strategic relationship between supply chain and financial communities within an organization. It contains vital information on how supply...

  11. The relation between supply chain performance and supply chain governance practices

    OpenAIRE

    Emil CRIȘAN; Ilie PARPUCEA; Liviu ILIEȘ

    2011-01-01

    The relation between corporate governance practices and firms’ performance is a common research subject for academics. This article goal is to present theoretical details regarding the possible relation between supply chain governance practices and supply chain performance, one issue less discussed at an international level. The first section of the article is related to supply chain governance as a new research area for academics. The main benefits of this approach, in comparison to corporat...

  12. Frustration-induced quantum phases in mixed spin chain with frustrated side chains

    Science.gov (United States)

    Hida, Kazuo; Takano, Ken'Ichi

    2008-08-01

    A mixed Heisenberg spin chain with frustrated side chains is investigated by numerical and perturbational calculations. A frustration-induced quantum partially polarized ferrimagnetic phase and a nonmagnetic spin quadrupolar phase are found adjacent to the conventional Lieb-Mattis-type ferrimagnetic phase or the nonmagnetic singlet cluster solid phases. The partially polarized ferrimagnetic phase has an incommensurate spin structure. Similar structures are commonly found in other frustration-induced partially polarized ferrimagnetic phases. Numerical results also suggest a series of almost critical nonmagnetic ground states in a highly frustrated regime if the side chain spins weakly couple to the main chain.

  13. Don't break the chain: importance of supply chain management in the operating room setting.

    Science.gov (United States)

    Bilyk, Candis

    2008-09-01

    Management of supplies within the operating room (OR) has considerable implications for decreasing healthcare costs while maintaining high-quality patient care. This area of healthcare therefore requires more monitoring by end-users including OR management, physicians, and nursing staff. This article is based on understanding supply chain management in the OR setting. Information provided throughout the article can be applied to small or large health care centers. It defines supply chain management and contains a brief overview of supply chain processes. It reviews the benefits of following these processes. The article also includes recommendations for improving the supply chain in the OR.

  14. Alignment between chain quality management and chain governance in EU pork supply chains: a Transaction-Cost-Economics perspective.

    Science.gov (United States)

    Wever, Mark; Wognum, Nel; Trienekens, Jacques; Omta, Onno

    2010-02-01

    Although inter-firm coordination of quality management is increasingly important for meeting end-customer demand in agri-food chains, few researchers focus on the relation between inter-firm quality management systems (QMS) and inter-firm governance structures (GS). However, failure to align QMSs and GSs may lead to inefficiencies in quality management because of high transaction-costs. In addition, misalignment is likely to reduce the quality of end-customer products. This paper addresses this gap in research by empirically examining the relation between QMSs and GSs in pork meat supply chains. Transaction-Cost-Economic theory is used to develop propositions about the relation between three aspects of QMSs--ownership, vertical scope and scale of adoption--and the use of different types of GSs in pork meat supply chains. To validate the propositions, seven cases are examined from four different countries. The results show that the different aspects of QMSs largely relate to specific GSs used in chains in the manner predicted by the propositions. This supports the view that alignment between QMSs and GSs is important for the efficient coordination of quality management in (pork meat) supply chains.

  15. Chain modeling for life cycle systems engineering

    Energy Technology Data Exchange (ETDEWEB)

    Rivera, J.J. [Sandia National Lab., Albuquerque, NM (United States); Shapiro, V. [Univ. of Wisconsin, Madison, WI (United States). Spatial Automation Lab.

    1997-12-01

    Throughout Sandia`s history, products have been represented by drawings. Solid modeling systems have recently replaced drawings as the preferred means for representing product geometry. These systems are used for product visualization, engineering analysis and manufacturing planning. Unfortunately, solid modeling technology is inadequate for life cycle systems engineering, which requires maintenance of technical history, efficient management of geometric and non-geometric data, and explicit representation of engineering and manufacturing characteristics. Such information is not part of the mathematical foundation of solid modeling. The current state-of-the-art in life cycle engineering is comprised of painstakingly created special purpose tools, which often are incompatible. New research on {open_quotes}chain modeling{close_quotes} provides a method of chaining the functionality of a part to the geometric representation. Chain modeling extends classical solid modeling to include physical, manufacturing, and procedural information required for life cycle engineering. In addition, chain modeling promises to provide the missing theoretical basis for Sandia`s parent/child product realization paradigm. In chain modeling, artifacts and systems are characterized in terms of their combinatorial properties: cell complexes, chains, and their operators. This approach is firmly rooted in algebraic topology and is a natural extension of current technology. The potential benefits of this approach include explicit hierarchical and combinatorial representation of physics, geometry, functionality, test, and legacy data in a common computational framework that supports a rational decision process and partial design automation. Chain modeling will have a significant impact on design preservation, system identification, parameterization, system reliability, and design simplification.

  16. Analysis of dynein intermediate chains, light intermediate chains and light chains in a cohort of hereditary peripheral neuropathies.

    Science.gov (United States)

    Tey, Shelisa; Ahmad-Annuar, Azlina; Drew, Alexander P; Shahrizaila, Nortina; Nicholson, Garth A; Kennerson, Marina L

    2014-10-01

    The cytoplasmic dynein heavy chain (DYNC1H1) gene has been increasingly associated with neurodegenerative disorders including axonal Charcot-Marie-Tooth disease (CMT2), intellectual disability and malformations of cortical development. In addition, evidence from mouse models (Loa, catabolite repressor-activator (Cra) and Sprawling (Swl)) has shown that mutations in Dync1h1 cause a range of neurodegenerative phenotypes with motor and sensory neuron involvement. In this current study, we examined the possible contribution of other cytoplasmic dynein subunits that bind to DYNC1H1 as a cause of inherited peripheral neuropathy. We focused on screening the cytoplasmic dynein intermediate, light intermediate and light chain genes in a cohort of families with inherited peripheral neuropathies. Nine genes were screened and ten variants were detected, but none was identified as pathogenic, indicating that cytoplasmic dynein intermediate, light intermediate and light chains are not a cause of neuropathy in our cohort.

  17. A Review of the Wood Pellet Value Chain, Modern Value/Supply Chain Management Approaches, and Value/Supply Chain Models

    Directory of Open Access Journals (Sweden)

    Natalie M. Hughes

    2014-01-01

    Full Text Available We reviewed 153 peer-reviewed sources to provide identification of modern supply chain management techniques and exploration of supply chain modeling, to offer decision support to managers. Ultimately, the review is intended to assist member-companies of supply chains, mainly producers, improve their current management approaches, by directing them to studies that may be suitable for direct application to their supply chains and value chains for improved efficiency and profitability. We found that information on supply chain management and modeling techniques in general is available. However, few Canadian-based published studies exist regarding a demand-driven modeling approach to value/supply chain management for wood pellet production. Only three papers were found specifically on wood pellet value chain analysis. We propose that more studies should be carried out on the value chain of wood pellet manufacturing, as well as demand-driven management and modeling approaches with improved demand forecasting methods.

  18. Validation of a terrestrial food chain model.

    Science.gov (United States)

    Travis, C C; Blaylock, B P

    1992-01-01

    An increasingly important topic in risk assessment is the estimation of human exposure to environmental pollutants through pathways other than inhalation. The Environmental Protection Agency (EPA) has recently developed a computerized methodology (EPA, 1990) to estimate indirect exposure to toxic pollutants from Municipal Waste Combuster emissions. This methodology estimates health risks from exposure to toxic pollutants from the terrestrial food chain (TFC), soil ingestion, drinking water ingestion, fish ingestion, and dermal absorption via soil and water. Of these, one of the most difficult to estimate is exposure through the food chain. This paper estimates the accuracy of the EPA methodology for estimating food chain contamination. To our knowledge, no data exist on measured concentrations of pollutants in food grown around Municipal Waste Incinerators, and few field-scale studies have been performed on the uptake of pollutants in the food chain. Therefore, to evaluate the EPA methodology, we compare actual measurements of background contaminant levels in food with estimates made using EPA's computerized methodology. Background levels of contaminants in air, water, and soil were used as input to the EPA food chain model to predict background levels of contaminants in food. These predicted values were then compared with the measured background contaminant levels. Comparisons were performed for dioxin, pentachlorophenol, polychlorinated biphenyls, benzene, benzo(a)pyrene, mercury, and lead.

  19. Energy localization in weakly dissipative resonant chains

    Science.gov (United States)

    Kovaleva, Agnessa

    2016-08-01

    Localization of energy in oscillator arrays has been of interest for a number of years, with special attention paid to the role of nonlinearity and discreteness in the formation of localized structures. This work examines a different type of energy localization arising due to the presence of dissipation in nonlinear resonance arrays. As a basic model, we consider a Klein-Gordon chain of finite length subjected to a harmonic excitation applied at an edge of the chain. It is shown that weak dissipation may be a key factor preventing the emergence of resonance in the entire chain, even if its nondissipative analog is entirely captured into resonance. The resulting process in the dissipative oscillator array represents large-amplitude resonant oscillations in a part of the chain adjacent to the actuator and small-amplitude oscillations in the distant part of the chain. The conditions of the emergence of resonance as well as the conditions of energy localization are derived. An agreement between the obtained analytical results and numerical simulations is demonstrated.

  20. Integrated Simulation Of Supply Chain Management

    Directory of Open Access Journals (Sweden)

    N.Manikandan

    2013-06-01

    Full Text Available Nowadays, manufacturers face the challenge of reducing manufacturing cycle time, delivery lead time and inventory reduction. Every organization has its own objectives and its own way of decision making processes. Because of the conflictions among the objectives of each organization and non-integrated decision making processes, there has been a need for a new mechanism, which help to resolve those conflictions and to integrate processes. In the early 1990s, management is a process of integrating and utilizing suppliers, manufacturers, warehouses and retailers, so that goods are produced and delivered at the right quantities and at the right time while minimizing costs as well as satisfying customer requirements. Managing the entire supply chain becomes a key factor for the successful business. Organizations now realize that non-integrated manufacturing processes, nonintegrated distribution processes and poor relationships with suppliers and customers are in adequate for their success. The supply chain areas are affected by the organization’s plan. The organization plan’s impact on the supply chain areas cannot be predicted before its execution. Simulation paves way to evaluate the performance of plans before the execution of the plan. This paper describes the effort of developing a simulation model for the supply chain management in an industry. This article discusses the requirement of supply chain simulation modeling.

  1. The Supply Chain, a Strategic Marketing Approach

    Directory of Open Access Journals (Sweden)

    Ştefan Claudiu Căescu

    2013-02-01

    Full Text Available The main objective of this article is to integrate strategic marketing instruments within the supply chain in relationship with the suppliers. In order to integrate the commercial and economic activities at the supply chain level there is a need of developing tight relationships between the customer and the supplier. Thus, it is justified to approach the supply chain from a strategic perspective and the strategic marketing tools are perfectly applicable on the business-to-business market. Our research, has led us to the conclusion that, especially on business to business markets, organizations focus their marketing activities not only on the relationship with their customers, but on the relationship with their suppliers as well. In the supply chain, companies appear as buyers and as clients for the suppliers of goods, financial resources and of work force. Starting from this, we have developed a quantitative marketing research, interviewing 60 organizations from the business-to-business Romanian market, with the purpose of identifying the way in which companies from the B2b market integrate strategic marketing in their supply-chain.

  2. Quantum Markov Chain Mixing and Dissipative Engineering

    DEFF Research Database (Denmark)

    Kastoryano, Michael James

    2012-01-01

    This thesis is the fruit of investigations on the extension of ideas of Markov chain mixing to the quantum setting, and its application to problems of dissipative engineering. A Markov chain describes a statistical process where the probability of future events depends only on the state of the sy......This thesis is the fruit of investigations on the extension of ideas of Markov chain mixing to the quantum setting, and its application to problems of dissipative engineering. A Markov chain describes a statistical process where the probability of future events depends only on the state...... framework for studying quantum Markov chain mixing. We introduce two new distance measures into the quantum setting; the quantum $\\chi^2$-divergence and Hilbert's projective metric. With the help of these distance measures, we are able to derive some basic bounds on the the mixing times of quantum channels....... Finally, we consider three independent tasks of dissipative engineering: dissipatively preparing a maximally entangled state of two atoms trapped in an optical cavity, dissipative preparation of graph states, and dissipative quantum computing construction....

  3. Monotone measures of ergodicity for Markov chains

    Directory of Open Access Journals (Sweden)

    J. Keilson

    1998-01-01

    Full Text Available The following paper, first written in 1974, was never published other than as part of an internal research series. Its lack of publication is unrelated to the merits of the paper and the paper is of current importance by virtue of its relation to the relaxation time. A systematic discussion is provided of the approach of a finite Markov chain to ergodicity by proving the monotonicity of an important set of norms, each measures of egodicity, whether or not time reversibility is present. The paper is of particular interest because the discussion of the relaxation time of a finite Markov chain [2] has only been clean for time reversible chains, a small subset of the chains of interest. This restriction is not present here. Indeed, a new relaxation time quoted quantifies the relaxation time for all finite ergodic chains (cf. the discussion of Q1(t below Equation (1.7]. This relaxation time was developed by Keilson with A. Roy in his thesis [6], yet to be published.

  4. Deformed Fredkin Spin Chain with Extensive Entanglement

    CERN Document Server

    Salberger, Olof; Zhang, Zhao; Katsura, Hosho; Klich, Israel; Korepin, Vladimir

    2016-01-01

    We introduce a new spin chain which is a deformation of the Fredkin spin chain and has a phase transition between bounded and extensive entanglement entropy scaling. In this chain, spins have a local interaction of three nearest neighbors. The Hamiltonian is frustration-free and its ground state can be described analytically as a weighted superposition of Dyck paths. In the purely spin $1/2$ case, the entanglement entropy obeys an area law: it is bounded from above by a constant, when the size of the block $n$ increases (and $t>1$). When a local color degree of freedom is introduced the entanglement entropy increases linearly with the size of the block (and $t>1$). The entanglement entropy of half of the chain is tightly bounded by ${ n}\\log s$ where $n$ is the size of the block, and $s$ is the number of colors. Our chain fosters a new example for a significant boost to entropy and for the existence of the associated critical rainbow phase where the entanglement entropy scales with volume that has recently be...

  5. Spin chains for robust state transfer: Modified boundary couplings versus completely engineered chains

    Science.gov (United States)

    Zwick, Analia; Álvarez, Gonzalo A.; Stolze, Joachim; Osenda, Omar

    2012-01-01

    Quantum state transfer in the presence of static disorder and noise is one of the main challenges in building quantum computers. We compare the quantum state transfer properties for two classes of qubit chains under the influence of static disorder. In fully engineered chains all nearest-neighbor couplings are tuned in such a way that a single-qubit state can be transferred perfectly between the ends of the chain, while in chains with modified boundaries only the two couplings between the transmitting and receiving qubits and the remainder of the chain can be optimized. We study how the disorder in the couplings affects the state transfer fidelity depending on the disorder model and strength as well as the chain type and length. We show that the desired level of fidelity and transfer time are important factors in designing a chain. In particular we demonstrate that transfer efficiency comparable or better than that of the most robust engineered systems can also be reached in chains with modified boundaries without the demanding engineering of a large number of couplings.

  6. Supply Chain Visibility with Linked Open Data for Supply Chain Risk Analysis

    NARCIS (Netherlands)

    Hofman, W.J.

    2011-01-01

    Current customs applications are declaration based to support the various customs procedures based on (inter)national laws and regulations. To be able to perform a proper supply chain risk analysis, customs requires to have all data in supply chains. The current declaration procedures are not suffic

  7. Sustainable Value Chains and Labour - Linking Chain and "Inner Drivers" : From Concepts to Practice

    NARCIS (Netherlands)

    L.J. Pegler (Lee)

    2011-01-01

    textabstractGlobal value chains are driven by considerations of cost and efficiency but just as much by power relations. This appears evident from studies of industrial relations and labour outcomes within value chains, especially those where drivenness is most explicit. Within a context of disaggre

  8. Alignment of Information Systems with Supply Chains: Impacts on Supply Chain Performance and Organizational Performance

    Science.gov (United States)

    Qrunfleh, Sufian M.

    2010-01-01

    Over the past decade, an important focus of researchers has been on supply chain management (SCM), as many organizations believe that effective SCM is the key to building and sustaining competitive advantage for their products/services. To manage the supply chain, companies need to adopt an SCM strategy (SCMS) and implement appropriate SCM…

  9. Ground states for nonuniform periodic Ising chains

    Science.gov (United States)

    Martínez-Garcilazo, J. P.; Ramírez, C.

    2015-04-01

    We generalize Morita's works [J. Phys. A 7, 289 (1974), 10.1088/0305-4470/7/2/014; J. Phys. A 7, 1613 (1974), 10.1088/0305-4470/7/13/015] on ground states of Ising chains, for chains with a periodic structure and different spins, to any interaction order. The main assumption is translational invariance. The length of the irreducible blocks is a multiple of the period of the chain. If there is parity invariance, it restricts the length in general only in the diatomic case. There are degenerated states and under certain circumstances there could be nonregular ground states. We illustrate the results and give the ground state diagrams in several cases.

  10. Magnetic chains on a triplet superconductor.

    Science.gov (United States)

    Sacramento, P D

    2015-11-11

    The topological state of a two-dimensional triplet superconductor may be changed by an appropriate addition of magnetic impurities. A ferromagnetic magnetic chain at the surface of a superconductor with spin-orbit coupling may eliminate the edge states of a finite system giving rise to localized zero modes at the edges of the chain. The coexistence/competition between the two types of zero modes is considered. The reduction of the system to an effective 1d system gives partial information on the topological properties but the study of the two sets of zero modes requires a two-dimensional treatment. Increasing the impurity density from a magnetic chain to magnetic islands leads to a finite Chern number. At half-filling small concentrations are enough to induce chiral modes.

  11. Ernst Chain: a great man of science.

    Science.gov (United States)

    Kardos, Nelson; Demain, Arnold L

    2013-08-01

    This paper is a tribute to the scientific accomplishments of Ernst Chain and the influence he exerted over the fields of industrial microbiology and biotechnology. Chain is the father of the modern antibiotic era and all the benefits that these therapeutic agents have brought, i.e., longer life spans, greater levels of public health, widespread modern surgery, and control of debilitating infectious diseases, including tuberculosis, gonorrhea, syphilis, etc. Penicillin was the first antibiotic to become commercially available, and its use ushered in the age of antibiotics. The discovery of penicillin's bactericidal action had been made by Alexander Fleming in London in 1928. After publishing his observations in 1929, no further progress was made until the work was picked up in 1939 by scientists at Oxford University. The group was headed by Howard Florey, and Chain was the group's lead scientist. Chain was born and educated in Germany, and he fled in 1933 as a Jewish refugee from Nazism to England. Other important members of the Oxford research team were Norman Heatley and Edward Abraham. The team was able to produce and isolate penicillin under conditions of scarce resources and many technical challenges. Sufficient material was collected and tested on mice to successfully demonstrate penicillin's bactericidal action on pathogens, while being nontoxic to mammals. Chain directed the microbiological methods for producing penicillin and the chemical engineering methods to extract the material. This technology was transferred to US government facilities in 1941 for commercial production of penicillin, becoming an important element in the Allied war effort. In 1945, the Nobel Prize for medicine was shared by Fleming, Florey, and Chain in recognition of their work in developing penicillin as a therapeutic agent. After World War II, Chain tried to persuade the British government to fund a new national antibiotic industry with both research and production facilities. As

  12. Iron modulates the alpha chain of fibrinogen.

    Science.gov (United States)

    Nielsen, Vance G; Jacobsen, Wayne K

    2016-04-01

    Iron-bound fibrinogen has been noted to accelerate plasmatic coagulation in patients with divergent conditions involving upregulation of heme oxygenase activity, including hemodialysis, Alzheimer's disease, sickle cell anemia, and chronic migraine. Our goal was to determine if a site of iron-fibrinogen interaction was on the alpha chain. Using thrombelastography, we compared the coagulation kinetic profiles of plasma exposed to 0-10 µM ferric chloride after activation of coagulation with thrombin generated by contact activation of plasma with the plastic sample cup or by exposure to 1 µg/ml of Calloselasma rhodostoma venom (rich in ancrod activity), which causes coagulation via polymerization of alpha chain monomers. Venom mediated coagulation always occurred before thrombin activated thrombus formation, and ferric chloride always diminished the time of onset of coagulation and increased the velocity of clot growth. Iron enhances plasmatic coagulation kinetics by modulating the alpha chain of fibrinogen.

  13. Information Technologies and Supply Chain Integration

    DEFF Research Database (Denmark)

    Lemoine, W; Mortensen, Ole

    The goal of the Supply Chain Management process is to create value for customers, stakeholders and all supply chain members, through the integration of different processes like manufacturing flow management, customer service and order fulfillment. However, many firms fail in the path of achieving...... integration. This study illustrates, from an empirical point of view, the problems associ-ated to SC integration among European firms operating in global/international markets. The focus is on the relationship between two echelons in the supply chain: manufacturers and their transport and logistics service...... providers (TLSPs). The paper examines (1) the characteristics of the collabo-rative partnerships established between manufacturers and TLSPs; (2) the IT used to support the SC cooperation and integration; (3) the key SC processes integrated; (4) the future demands for services, and the expected process...

  14. Quality in Construction- A Supply Chain Perspective

    DEFF Research Database (Denmark)

    Koch, Christian; Larsen, Casper Schultz

    2006-01-01

    Often the construction supply chain is perceived as consisting of two intertwined streams; a stream of materials and a stream of immaterial informational character. Moreover the supply delivery would be characterized by configuration by project. That this configuration is not always successful can...... be demonstrated by studying the emergence of failures occurring in the supply chain. The paper conceptualises the construction supply as a delivery network being partially stable, partially project specific and configured. It moreover develops a frame of understanding of the handling of quality issues...... in the delivery network, using operation management approaches. The paper presents case study work done in Danish construction. The method was observation of work at the construction site followed by interviews with actors backwards upstream the supply chain to the origin of the failure. The building project...

  15. ECO-EFFICIENCY WITHIN EXTENDED SUPPLY CHAIN

    Directory of Open Access Journals (Sweden)

    Handson Cláudio Dias Pimenta

    2012-05-01

    Full Text Available Designers make decisions that ultimately impact on both the economic and environmental performance of the products, and many of these costs and impacts occur across the supply chain. This paper proposes an initial discussion aboult eco-efficiency concepts applied within extended supply chain (ESC. Eco-efficiency (EE has the potential to incorporate both environmental and economic improvement by companies of ESC, and we explore the use of EE in the design process. It is noteworthy that it is an imperative in the current competitive market that companies must be able to manage their entire production chain taking into account environmental issues as an important factor in their decision-making processes. Therefore, it is believed that EE can integrate and strengthen a company’s functions and assist its decision-making processes as well as implement improvements within its ESC.

  16. Kinetic chain abnormalities in the athletic shoulder.

    Science.gov (United States)

    Sciascia, Aaron; Thigpen, Charles; Namdari, Surena; Baldwin, Keith

    2012-03-01

    Overhead activities require the shoulder to be exposed to and sustain repetitive loads. The segmental activation of the body's links, known as the kinetic chain, allows this to occur effectively. Proper muscle activation is achieved through generation of energy from the central segment or core, which then transfers the energy to the terminal links of the shoulder, elbow, and hand. The kinetic chain is best characterized by 3 components: optimized anatomy, reproducible efficient motor patterns, and the sequential generation of forces. However, tissue injury and anatomic deficits such as weakness and/or tightness in the leg, pelvic core, or scapular musculature can lead to overuse shoulder injuries. These injuries can be prevented and maladaptations can be detected with a thorough understanding of biomechanics of the kinetic chain as it relates to overhead activity.

  17. Sustainable supply chain design: a configurational approach.

    Science.gov (United States)

    Masoumik, S Maryam; Abdul-Rashid, Salwa Hanim; Olugu, Ezutah Udoncy; Raja Ghazilla, Raja Ariffin

    2014-01-01

    Designing the right supply chain that meets the requirements of sustainable development is a significant challenge. Although there are a considerable number of studies on issues relating to sustainable supply chain design (SSCD) in terms of designing the practices, processes, and structures, they have rarely demonstrated how these components can be aligned to form an effective sustainable supply chain (SSC). Considering this gap in the literature, this study adopts the configurational approach to develop a conceptual framework that could configure the components of a SSC. In this respect, a process-oriented approach is utilized to classify and harmonize the design components. A natural-resource-based view (NRBV) is adopted to determine the central theme to align the design components around. The proposed framework presents three types of SSC, namely, efficient SSC, innovative SSC, and reputed SSC. The study culminates with recommendations concerning the direction for future research.

  18. Markov processes and controlled Markov chains

    CERN Document Server

    Filar, Jerzy; Chen, Anyue

    2002-01-01

    The general theory of stochastic processes and the more specialized theory of Markov processes evolved enormously in the second half of the last century. In parallel, the theory of controlled Markov chains (or Markov decision processes) was being pioneered by control engineers and operations researchers. Researchers in Markov processes and controlled Markov chains have been, for a long time, aware of the synergies between these two subject areas. However, this may be the first volume dedicated to highlighting these synergies and, almost certainly, it is the first volume that emphasizes the contributions of the vibrant and growing Chinese school of probability. The chapters that appear in this book reflect both the maturity and the vitality of modern day Markov processes and controlled Markov chains. They also will provide an opportunity to trace the connections that have emerged between the work done by members of the Chinese school of probability and the work done by the European, US, Central and South Ameri...

  19. The Respiratory Chain of Alkaliphilic Bacteria

    Energy Technology Data Exchange (ETDEWEB)

    Terry Ann Krulwich

    2008-01-29

    Alkaliphilic bacteria that grow at extremely high pH are confronted by particular bioenergetic problems in carrying out oxidative phosphorylation. This project focused on the properties and adaptations of the respiratory chain. The respiratory chain as a whole, the redox poises of its components and several individual complexes of the respiratory chain of alkaliphilic Bacillus pseudofirmus OF4 have been characterized as part of this project and, importantly, this project has helped support the development of genetic tools that make B. pseudofirmus OF4 the most genetically tractable and, hence, most bioenergetically characterized extreme alkaliphile. Evidence has been obtained for a pivotal role of the cca3-type terminal oxidase in oxidative phosphorylation, especially at high pH and motifs that may be relevant to that special role have been identified.

  20. Markov chains for testing redundant software

    Science.gov (United States)

    White, Allan L.; Sjogren, Jon A.

    1988-01-01

    A preliminary design for a validation experiment has been developed that addresses several problems unique to assuring the extremely high quality of multiple-version programs in process-control software. The procedure uses Markov chains to model the error states of the multiple version programs. The programs are observed during simulated process-control testing, and estimates are obtained for the transition probabilities between the states of the Markov chain. The experimental Markov chain model is then expanded into a reliability model that takes into account the inertia of the system being controlled. The reliability of the multiple version software is computed from this reliability model at a given confidence level using confidence intervals obtained for the transition probabilities during the experiment. An example demonstrating the method is provided.

  1. Identifying the Isomorphism of Kinematic Chains

    Directory of Open Access Journals (Sweden)

    Romaniak Krystyna

    2016-09-01

    Full Text Available Identification of isomorphic kinematic chains is one of the key issues in researching the structure of mechanisms. As a result the structures which duplicate are eliminated and further research is carried out on kinematic chains that do not duplicate. This dilemma has been taken up by many scholars who have come up with a variety of ideas how to solve it. The review of the methods for identifying the isomorphism of kinematic chains suggested by researchers is contained in this study, including Hamming Number Technique, eigenvalues and eigenvectors, perimeter graphs, dividing and matching vertices. The spectrum of methods applied to the issue of identifying the iso-morphism of mechanisms reflects the researchers’ efforts to obtain a precise result in the shortest time possible.

  2. General equilibrium shape equations of polymer chains.

    Science.gov (United States)

    Zhang, Shengli; Zuo, Xianjun; Xia, Minggang; Zhao, Shumin; Zhang, Erhu

    2004-11-01

    The general equilibrium shape equations of polymer chains are analytically derived in this paper. This provides a unified description for many models, such as the well-known wormlike chain (WLC) model, the wormlike rod chain (WLRC) model, carbon nanotubes, and so on. Using the WLC model, we find that the pitch-to-radius ratio of coils, 4.443, agrees with Z-DNA, and the pitch-to-radius ratio from WLRC agrees with the data of B-DNA qualitatively. Using the general shape equations, we discuss a chiral model in which the solutions of straight, helical, and circular biopolymers are given, respectively. We also find that the model suggested by Helfrich [Langmuir 7, 567 (1991)] is very appropriate to describe B-DNA (or other biopolymers) if we choose the four phenomenological parameters as A=50 nm , C=60 nm(2) , alpha=40 nm(3) , and beta=50 nm(2) .

  3. Electronic bistability in linear beryllium chains.

    Science.gov (United States)

    Helal, Wissam; Monari, Antonio; Evangelisti, Stefano; Leininger, Thierry

    2009-04-30

    A theoretical investigation on the mixed-valence behavior (bistability) of a series of cationic linear chains composed of beryllium atoms, Be(N)(+) (with N = 6,..., 12), is presented. The calculations were performed at CAS-SCF and MR-CI levels by using an ANO basis set containing 6s4p3d2f orbitals for each atom. Our results show a consistent gradual shift between different classes of mixed-valence compounds as the number of beryllium atoms increases, from class III strong coupling toward class II valence trapped. Indeed, in the largest cases (N > 10), the cationic chains were found to be closer to class I, where the coupling vanishes. The intramolecular electron transfer parameters V(ab), E(a), and E(opt) were calculated for each atomic chain. It is shown that the decrease of V(ab) with increasing N follows an exponential pattern.

  4. Advanced planning methodologies in food supply chains

    DEFF Research Database (Denmark)

    Farahani, Poorya

    The food industry is an important sector both because of its direct impacts on the daily lives of people and its large share of GDP compared with other economic sectors. This thesis discusses and develops advanced planning methodologies to optimize operations in food supply chains. From a supply...... chain perspective, this thesis mainly focuses on the part of the chain which starts from the food processing industry: the food processing industry, the distribution industry, and final consumers. In the second chapter of this thesis, a thorough review is presented classifying the related contributions...... in strategic, tactical, and operational studies, aiming to explain how several key food distribution planning challenges have been dealt with in the Operations Management literature. The next two chapters discuss specific production and distribution planning problems from the foodservice sector. Generic...

  5. Rigor in Qualitative Supply Chain Management Research

    DEFF Research Database (Denmark)

    Goffin, Keith; Raja, Jawwad; Claes, Björn

    2012-01-01

    Purpose – The purpose of this paper is to share the authors' experiences of using the repertory grid technique in two supply chain management studies. The paper aims to demonstrate how the two studies provided insights into how qualitative techniques such as the repertory grid can be made more...... rigorous than in the past, and how results can be generated that are inaccessible using quantitative methods. Design/methodology/approach – This paper presents two studies undertaken using the repertory grid technique to illustrate its application in supply chain management research. Findings – The paper......, reliability, and theoretical saturation. Originality/value – It is the authors' contention that the addition of the repertory grid technique to the toolset of methods used by logistics and supply chain management researchers can only enhance insights and the building of robust theories. Qualitative studies...

  6. Heat Capacity of 1D Molecular Chains

    Science.gov (United States)

    Bagatskii, M. I.; Barabashko, M. S.; Sumarokov, V. V.; Jeżowski, A.; Stachowiak, P.

    2017-04-01

    The heat capacity of 1D chains of nitrogen and methane molecules (adsorbed in the outer grooves of bundles of closed-cap single-walled carbon nanotubes) has been studied in the temperature ranges 2-40 and 2-60 K, respectively. The temperature dependence of the heat capacity of 1D chains of nitrogen molecules below 3 K is close to a linear. It was found that the rotational heat capacity of methane molecules is a significant part of the total heat capacity of the chains throughout the whole investigated temperature range, whereas in the case of nitrogen, the librations are significant only above 15 K. The dependence of the heat capacity for methane below 10 K indicates the presence of a Schottky anomaly caused by the tunneling between the lowest energy levels of the CH4 molecule rotational spectra. Characteristic features observed in the temperature dependence of the heat capacity of 1D methane crystals are also discussed.

  7. The electronic properties of a Fibonacci chain

    Directory of Open Access Journals (Sweden)

    S. A. Ketabi

    2004-12-01

    Full Text Available  Using a tight-binding model and transfer-matrix technique, as well as Lanczos algorithm, we numerically investigate the nature of the electronic states and electron transmission in site, bond and mixing Fibonacci model chains. We rely on the Landauer formalism as the basis for studying the conduction properties of these systems. Calculating the Lyapunov exponent, we also study the localization properties of electronic eigenstates in the Fibonacci chains. The focus is on the significance of the relationship between the transmission spectra and the nature of the electronic states. Our results show that, in contrast to Anderson’s localization theorem, in the Fibonacci chains the electronic states are non-localized and the transparent states occurr near the Fermi level.

  8. Characterization of qubit chains by Feynman probes

    Science.gov (United States)

    Tamascelli, Dario; Benedetti, Claudia; Olivares, Stefano; Paris, Matteo G. A.

    2016-10-01

    We address the characterization of qubit chains and assess the performances of local measurements compared to those provided by Feynman probes, i.e., nonlocal measurements realized by coupling a single-qubit register to the chain. We show that local measurements are suitable to estimate small values of the coupling and that a Bayesian strategy may be successfully exploited to achieve optimal precision. For larger values of the coupling Bayesian local strategies do not lead to a consistent estimate. In this regime, Feynman probes may be exploited to build a consistent Bayesian estimator that saturates the Cramér-Rao bound, thus providing an effective characterization of the chain. Finally, we show that ultimate bounds to precision, i.e., saturation of the quantum Cramér-Rao bound, may be achieved by a two-step scheme employing Feynman probes followed by local measurements.

  9. Growth and dissolution of macromolecular Markov chains

    CERN Document Server

    Gaspard, Pierre

    2016-01-01

    The kinetics and thermodynamics of free living copolymerization are studied for processes with rates depending on k monomeric units of the macromolecular chain behind the unit that is attached or detached. In this case, the sequence of monomeric units in the growing copolymer is a kth-order Markov chain. In the regime of steady growth, the statistical properties of the sequence are determined analytically in terms of the attachment and detachment rates. In this way, the mean growth velocity as well as the thermodynamic entropy production and the sequence disorder can be calculated systematically. These different properties are also investigated in the regime of depolymerization where the macromolecular chain is dissolved by the surrounding solution. In this regime, the entropy production is shown to satisfy Landauer's principle.

  10. Growth and Dissolution of Macromolecular Markov Chains

    Science.gov (United States)

    Gaspard, Pierre

    2016-07-01

    The kinetics and thermodynamics of free living copolymerization are studied for processes with rates depending on k monomeric units of the macromolecular chain behind the unit that is attached or detached. In this case, the sequence of monomeric units in the growing copolymer is a kth-order Markov chain. In the regime of steady growth, the statistical properties of the sequence are determined analytically in terms of the attachment and detachment rates. In this way, the mean growth velocity as well as the thermodynamic entropy production and the sequence disorder can be calculated systematically. These different properties are also investigated in the regime of depolymerization where the macromolecular chain is dissolved by the surrounding solution. In this regime, the entropy production is shown to satisfy Landauer's principle.

  11. The entanglement negativity in random spin chains

    CERN Document Server

    Ruggiero, Paola; Calabrese, Pasquale

    2016-01-01

    We investigate the logarithmic negativity in strongly-disordered spin chains in the random-singlet phase. We focus on the spin-1/2 random Heisenberg chain and the random XX chain. We find that for two arbitrary intervals the disorder-averaged negativity and the mutual information are proportional to the number of singlets shared between the two intervals. Using the strong-disorder renormalization group (SDRG), we prove that the negativity of two adjacent intervals grows logarithmically with the intervals length. In particular, the scaling behavior is the same as in conformal field theory, but with a different prefactor. For two disjoint intervals the negativity is given by a universal simple function of the cross ratio, reflecting scale invariance. As a function of the distance of the two intervals, the negativity decays algebraically in contrast with the exponential behavior in clean models. We confirm our predictions using a numerical implementation of the SDRG method. Finally, we also implement DMRG simula...

  12. Enterprise Architecture in the Supply Chain

    DEFF Research Database (Denmark)

    Tambo, Torben; Koch, Christian

    2010-01-01

    Information systems in supply chain management (SCM) is common, bringing architecture on the agenda . The paper uses three perspectives on enterprise architecture (EA) in the supply chain: The correlation view, the remote view and the institutional view. It is shown that the EA in the domain....... Agility is fighting lack of understanding on technological and social impact. Assurance is the compliance of any type: Internal, external, quality, voluntary, governmental, international, moral, social and legal. A case of an apparel company using a bespoke ERP system for its global supply chain support...... is presented and discussed. The case outlines potentials for an enhanced alignment and coherence between management, business processes and underlying information system; innovation is led by tighter integration with business partners, higher versatility in the adaption to formal business requirements...

  13. An efficient algorithm for finding the largest chain graph according to a given chain graph

    Institute of Scientific and Technical Information of China (English)

    LIU Baijun; ZHENG Zhongguo; ZHAO Hui

    2005-01-01

    Chain graph (CG) is a general model of graphical Markov models. Some different chain graphs may describe the same conditional independence structure, then we say that these CGs are Markov equivalent. In 1990 Frydenberg showed that every class of Markov equivalent CGs has a CG which is called the largest chain graph with the greatest number of lines. This paper presents an efficient algorithm for finding the largest chain graph of the corresponding Markov equivalent class of a given CG. The computational complexity of the algorithm is O(n3). It is more efficient than the complexity O(n!) of the present algorithms. Also a more intuitive graphical characterization of the largest chain graph is provided based on the algorithm in this paper.

  14. Supply chain management for small business--how to avoid being part of the food chain.

    Science.gov (United States)

    Knechtges, J P; Watts, C A

    2000-08-01

    A supply chain is a series of customer and supplier relationships that extend throughout and beyond the company. It is an interwoven set of links that together form a chain supplying our customers in a seamless and integrated fashion delivering a high level of customer satisfaction. Supply chain management (SCM) integrates all activities so they are focused on customer satisfaction (both internally and externally). One of the things this article will attempt to accomplish is to provide a clear understanding of SCM's positive impact on customer service as well as on improving profitability, cash flow, product cycle times, and communication. Whether we go forward in the supply chain to the final end-user or backward in the supply chain to our supplier's suppliers, SCM will significantly improve our ability to serve our customers.

  15. USING A NEW SUPPLY CHAIN PLANNING METHODOLOGY TO IMPROVE SUPPLY CHAIN EFFICIENCY

    Directory of Open Access Journals (Sweden)

    A.L.V. Raubenheimer

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Effective supply chain planning and management has emerged as one of the most challenging opportunities for companies in the global economy during the last decade or two. This article reviews the evolution of Supply Chain Management and the traditional Supply Chain Solutions. It then introduces a new Supply Chain Planning methodology in which simulation modelling plays an important value-adding role to help organisations understand the dynamics of their Supply Chains.

    AFRIKAANSE OPSOMMING:Effektiewe voorsieningskettingbeplanning en –bestuur het gedurende die laaste twee dekades ontwikkel tot een van die mees uitdagende geleenthede vir ondernemings in die wêreldekonomie. Hierdie artikel hersien kortliks die ontwikkeling van voorsieningskettingbestuur en die tradisionele oplossings. ‘n Nuwe voorsieningskettingbeplanningsmetodologie word dan voorgestel en bespreek waarin simulasiemodellering ‘n belangrike rol speel om ondernemings te help om die dinamika van hul voorsieningskettings te begryp.

  16. Integration of vaccine supply chains with other health commodity supply chains: a framework for decision making.

    Science.gov (United States)

    Yadav, Prashant; Lydon, Patrick; Oswald, Julianna; Dicko, Modibo; Zaffran, Michel

    2014-11-28

    One of the primary objectives of National Immunization Programs is to strengthen and optimize immunization supply chains so that vaccines are delivered to the end recipients effectively, efficiently and sustainably. As a result of larger investments in global health and a wider portfolio of vaccines, global agencies are recognizing the need for vaccine supply chains to operate at their most optimal levels. Integration with other supply chains is often presented as a strategy to improve efficiency. However, it remains unclear if the proposed benefits from integration of vaccine supply chains with other supply chains will outweigh the costs. This paper provides a framework for deciding where such integration offers the most significant benefits. It also cautions about the pitfalls of integration as a one size fits all strategy. It also highlights the need for systematic collection of cost and efficiency data in order to understand the value of integration and other such initiatives.

  17. Additive manufacturing technology in spare parts supply chain

    DEFF Research Database (Denmark)

    Li, Yao; Jia, Guozhu; Yang, Cheng

    2016-01-01

    Additive Manufacturing (AM) technology has the potential to significantly improve supply chain dynamics. The purpose of this paper is to investigate the impact of AM on spare parts supply chain. Three supply chain scenarios are investigated in this paper, namely conventional supply chain...

  18. Chain Analysis for large-scale Communication systems

    NARCIS (Netherlands)

    Grijpink, Jan

    2010-01-01

    The chain concept is introduced to explain how large-scale information infrastructures so often fail and sometimes even backfire. Next, the assessment framework of the doctrine of Chain-computerisation and its chain analysis procedure are outlined. In this procedure chain description precedes assess

  19. Supply chain orchestration and choreography: Programmable logistics using semantics

    NARCIS (Netherlands)

    Dalmolen, S.; Moonen, H.M.; Hillegersberg, van J.; Stoter, A.J.R.; Cornelisse, E.

    2015-01-01

    Interoperability between enterprise systems in supply chains is increasingly essential for successful supply chain integration and key in the creation of innovative businesses / business models. In this paper we present a novel approach for supply chain choreography to support supply chain organizat

  20. Markov Chain Approximations to Singular Stable-like Processes

    OpenAIRE

    2012-01-01

    We consider the Markov chain approximations for singular stable-like processes. First we obtain properties of some Markov chains. Then we construct the approximating Markov chains and give a necessary condition for weak convergence of these chains to singular stable-like processes.

  1. Supply chain optimization for pediatric perioperative departments.

    Science.gov (United States)

    Davis, Janice L; Doyle, Robert

    2011-09-01

    Economic challenges compel pediatric perioperative departments to reduce nonlabor supply costs while maintaining the quality of patient care. Optimization of the supply chain introduces a framework for decision making that drives fiscally responsible decisions. The cost-effective supply chain is driven by implementing a value analysis process for product selection, being mindful of product sourcing decisions to reduce supply expense, creating logistical efficiency that will eliminate redundant processes, and managing inventory to ensure product availability. The value analysis approach is an analytical methodology for product selection that involves product evaluation and recommendation based on consideration of clinical benefit, overall financial impact, and revenue implications.

  2. Supply chain coordination in industrial symbiosis

    DEFF Research Database (Denmark)

    Herczeg, Gabor; Akkerman, Renzo; Hauschild, Michael Zwicky

    2013-01-01

    Industrial symbiosis (IS) is a form of supply chain cooperation in industrial networks in order to achieve collective benefits by leveraging each other’s by-products and sharing services and utilities. This paper investigates the concept of IS from the perspective of supply chain coordination (SCC......). For this purpose a theoretical framework is built based on SCC aspects, which is subsequently used to analyze a case study. We conclude that research is scant on operational issues and trade-offs as well as on challenges in terms of logistical integration. Also small-scale examples are barely studied or modeled....

  3. Optimization Methods for Supply Chain Activities

    Directory of Open Access Journals (Sweden)

    Balasescu S.

    2014-12-01

    Full Text Available This paper approach the theme of supply chain activities for medium and large companies which run many operations and need many facilities. The first goal is to analyse the influence of optimisation methods of supply chain activities on the success rate for a business. The second goal is to compare some logistic strategies applied by companies with the same profile to see which is the most effective. The final goal is to show which is the necessity of strategic optimum for a company and how can be achieved the considering the demand uncertainty.

  4. Entanglement in spin-1 Heisenberg XY chain

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    We investigated the quantum entanglement in spin-1 Heisenberg XY chain for two-spin-qutrit and multi-particle systems. As a measure of the entanglement, the negativity of this state was analyzed as a function of the temperature and the magnetic field. We gave some numerical results and discussed them in detail. We found that the negativity increases monotonously with the coupling constants |J1| and |J2|, and it showed a symmetry with respect to the point of J1=0 and J2=0. In addition to the above features, there is evidence that the critical temperature is independent of the length of the chain.

  5. Entanglement in spin-1 Heisenberg XY chain

    Institute of Scientific and Technical Information of China (English)

    QIN Meng; TAO YingJuan; HU MingLiang; TIAN DongPing

    2008-01-01

    We investigated the quantum entanglement in spin-1 Heisenberg XY chain for two-spin-qutrit and multi-particle systems. As a measure of the entanglement, the negativity of this state was analyzed as a function of the temperature and the magnetic field. We gave some numerical results and discussed them in detail. We found that the negativity increases monotonously with the coupling constants |J1|and |J2|, and it showed a symmetry with respect to the point of J1=0 and J2= 0. In addition to the above features, there is evidence that the critical temperature is independent of the length of the chain.

  6. Chain Conformation and Bioactivity of Lentinan

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The chain conformation of Lentinan, a (1→3)-(-D-glucan having (1→6) branching, from Lentinus edodes in 0.9% NaCl aqueous solution and dimethylsulfoxide (Me_2SO) was investigated by size-exclusion chromatography combined with multi-angle laser light scattering (SEC-LLS), LLS, and viscometry. The results indicated that Lentinan exists as a triple helix in 0.9% NaCl aqueous solution and as a single flexible chain in Me_2SO. Assays in vivo and in vitro against the growth of Sarcoma 180 solid tumor as well as co...

  7. Dynamic system evolution and markov chain approximation

    Directory of Open Access Journals (Sweden)

    Roderick V. Nicholas Melnik

    1998-01-01

    Full Text Available In this paper computational aspects of the mathematical modelling of dynamic system evolution have been considered as a problem in information theory. The construction of mathematical models is treated as a decision making process with limited available information.The solution of the problem is associated with a computational model based on heuristics of a Markov Chain in a discrete space–time of events. A stable approximation of the chain has been derived and the limiting cases are discussed. An intrinsic interconnection of constructive, sequential, and evolutionary approaches in related optimization problems provides new challenges for future work.

  8. The Governance of Global Wealth Chains

    DEFF Research Database (Denmark)

    Seabrooke, Leonard; Wigan, Duncan

    , literature on finance and law in institutional economics, and work from economic sociology on network dynamics within markets. This scholarship assists us in highlighting three variables in how Global Wealth Chains are articulated and change according to: (1) the complexity of transactions, (2) regulatory...... international tax laws to highly complex and flexible innovative financial products produced by large financial institutions and corporations. This article highlights how Global Wealth Cha ins intersect with value chains and real economies, and provides three brief case studies on offshore shell companies...

  9. Low-temperature transport in Heisenberg chains.

    Science.gov (United States)

    Alvarez, J V; Gros, Claudius

    2002-02-18

    A technique to determine accurately transport properties of integrable and nonintegrable quantum-spin chains at finite temperatures by quantum Monte Carlo is presented. The reduction of the Drude weight by interactions in the integrable gapless regime is evaluated. Evidence for the absence of Drude weight in the gapless regime of a nonintegrable system with longer-ranged interactions is presented. We estimate the effect of the nonintegrability on the transport properties and compare with recent experiments on one-dimensional quantum-spin chains.

  10. Topologically protected localised states in spin chains

    Science.gov (United States)

    Estarellas, Marta P.; D’Amico, Irene; Spiller, Timothy P.

    2017-02-01

    We consider spin chain families inspired by the Su, Schrieffer and Hegger (SSH) model. We demonstrate explicitly the topologically induced spatial localisation of quantum states in our systems. We present detailed investigations of the effects of random noise, showing that these topologically protected states are very robust against this type of perturbation. Systems with such topological robustness are clearly good candidates for quantum information tasks and we discuss some potential applications. Thus, we present interesting spin chain models which show promising applications for quantum devices.

  11. Achieving competitiveness through supply chain integration

    DEFF Research Database (Denmark)

    Wong, Chee Yew; Arlbjørn, Jan S.; Seerup, Søren

    2007-01-01

    Supply chain development can take place in several steps, from functional optimisation, then internal integration, dyadic integration and last, integration in chains and networks. Before external integration gives true value, order in own house must be achieved. This paper presents a case study...... of a Danish manufacturer that has gone through a major transformation process, and the paper intends to discuss how such a Business Process Reengineering (BPR) project aimed to achieve internal integration. The paper demonstrates how improved competitiveness can be obtained through a synchronous...

  12. The Greening of Global Value Chains

    DEFF Research Database (Denmark)

    De Marchi, Valentina; Maria, Eleonora Di; Ponte, Stefano

    2013-01-01

    With increasing fragmentation of production between independent firms that are spatially dispersed and are responsible for different steps of the production process, a Global Value Chain approach is employed to examine how ‘lead firms’ shape the green features of upstream activities. Comparative......-off’ mechanisms embedded in standards and design. Two governing approaches to the greening of value chains are identified: standard-driven and mentoring-driven, and these are used to provide some reflections on when we are likely to observe one or the other, and also to develop a future research agenda....

  13. Parallel Markov chain Monte Carlo simulations.

    Science.gov (United States)

    Ren, Ruichao; Orkoulas, G

    2007-06-07

    With strict detailed balance, parallel Monte Carlo simulation through domain decomposition cannot be validated with conventional Markov chain theory, which describes an intrinsically serial stochastic process. In this work, the parallel version of Markov chain theory and its role in accelerating Monte Carlo simulations via cluster computing is explored. It is shown that sequential updating is the key to improving efficiency in parallel simulations through domain decomposition. A parallel scheme is proposed to reduce interprocessor communication or synchronization, which slows down parallel simulation with increasing number of processors. Parallel simulation results for the two-dimensional lattice gas model show substantial reduction of simulation time for systems of moderate and large size.

  14. Equity in multiproduct supply chain network

    Directory of Open Access Journals (Sweden)

    Mina SAEE BOSTANABAD

    2013-01-01

    Full Text Available In this paper, multiproduct supply chain network is investigated with equity consideration,namely, obtaining the optimal flow pattern, in such a way that no user in the network can increasehis(her benefit with change in product’s sending path. However, each kind of products, has anindividual cost function and, at the same time, contributes to its own and other product’s cost functionin an individual way. An algorithm is developed to find optimal flow pattern for such multiproductsupply chain network.

  15. Complementary Theories to Supply Chain Management Revisited

    DEFF Research Database (Denmark)

    Halldorsson, Arni; Hsuan, Juliana; Kotzab, Herbert

    2015-01-01

    Purpose – The aim of this paper is to identify ways by which the theorizing of supply chain management (SCM) takes place, with particular attention to complementary theories. SCM suffers as well as benefits from a “conceptual slack”. Design/methodology/approach – The nature of SCM is discussed...... complementary theories to advancing understanding of SCM can benefit from the five building blocks of theorizing SCM proposed in the paper. Practical implications – Theoretical principles in SCM are not only used to describe practical problems but also to “produce the world”; supply chains can be seen...

  16. RISK MANAGEMENT PROCESSES IN SUPPLY CHAINS

    Directory of Open Access Journals (Sweden)

    Aleksandar Aleksić

    2009-06-01

    Full Text Available One of the keys of successful business last few years is effective dealing with risks in every meaning of that word. At the time when the world economic crisis largely limits business, successful Risk management is the only way of survival for a large number of business systems. This paper will present the processes of risk management in supply chains that are in accordance with the standards ISO 28000 and ISO 31000. By implementing a holistic, enterprise-wide supply chain risk management program, companies also can uphold their commitment to providing strong corporate governance on behalf of stakeholders and increase their market value.

  17. Side chain polysiloxanes with phthalocyanine moieties

    Directory of Open Access Journals (Sweden)

    T. Ganicz

    2012-05-01

    Full Text Available Side chain polysiloxane with 5-(pentyloxy-3-methyloxy-9,10,16,17,23,24-hexakis(octenyloxyphthalocyanine moieties is synthesized by hydrosilylation reaction. The phase behavior and thermooptical properties of the polysiloxane and starting 2-(pent-4-enyloxy-3-methyloxy-9,10,16,17,23,24-hexakis(octenyloxyphthalocyanine is examined by POM (Polarizing optical microscopy, TOA (thermooptical analysis, DSC (differential scanning calorimetry, AFM (atomic force microscopy and SAXS (small angle X-ray scattering studies. The effect of the attachment of phthalocyanine to polysiloxane chains over phase transitions and phase morphology is discussed in details.

  18. Serpentine Locomotion Articulated Chain: ANA II

    Directory of Open Access Journals (Sweden)

    A. M. Cardona

    2005-01-01

    Full Text Available When humanity faces challenges in solving problems beyond their technical resources, and has no foundation to solve a problem, engineering must search for an answer developing new concepts and innovative frameworks to excel these limitations and travel beyond our capabilities. This project “Serpentine locomotion articulated chain: ANA II” is a self-contained robot built to evaluate the behavior of the platform being capable of serpentine movements, in a modular chain mechanical design, based on a master/slave architecture.

  19. Entropy production fluctuations of finite Markov chains

    Science.gov (United States)

    Jiang, Da-Quan; Qian, Min; Zhang, Fu-Xi

    2003-09-01

    For almost every trajectory segment over a finite time span of a finite Markov chain with any given initial distribution, the logarithm of the ratio of its probability to that of its time-reversal converges exponentially to the entropy production rate of the Markov chain. The large deviation rate function has a symmetry of Gallavotti-Cohen type, which is called the fluctuation theorem. Moreover, similar symmetries also hold for the rate functions of the joint distributions of general observables and the logarithmic probability ratio.

  20. Chain binomial models and binomial autoregressive processes.

    Science.gov (United States)

    Weiss, Christian H; Pollett, Philip K

    2012-09-01

    We establish a connection between a class of chain-binomial models of use in ecology and epidemiology and binomial autoregressive (AR) processes. New results are obtained for the latter, including expressions for the lag-conditional distribution and related quantities. We focus on two types of chain-binomial model, extinction-colonization and colonization-extinction models, and present two approaches to parameter estimation. The asymptotic distributions of the resulting estimators are studied, as well as their finite-sample performance, and we give an application to real data. A connection is made with standard AR models, which also has implications for parameter estimation.

  1. Transport properties of a ladder with two random dimer chains

    Institute of Scientific and Technical Information of China (English)

    Hu Donng-Sheng; Zhu Chen-Ping; Zhang Yong-Mei

    2011-01-01

    We investigate the transport properties of a ladder with two random dimer (RD) chains. It is found that there are two extended states in the ladder with identical RD chains and a critical state regarded as an extended state in the ladder with pairing RD chains. Such a critical state is caused by the chiral symmetry. The ladder with identical RD chains can be decoupled into two isolated RD chains and the ladder with pairing RD chains can not. The analytic expressions of the extended states are presented for the ladder with identical RD chains.

  2. Supply chain orchestration and choreography: Programmable logistics using semantics

    OpenAIRE

    Dalmolen, S.; Moonen, H.M.; Hillegersberg, van, Jos; Stoter, A.J.R.; Cornelisse, E.

    2015-01-01

    Interoperability between enterprise systems in supply chains is increasingly essential for successful supply chain integration and key in the creation of innovative businesses / business models. In this paper we present a novel approach for supply chain choreography to support supply chain organizations in practice in creating seamless chain integration. The aim we set ourselves in this paper is to propose an architecture to enable and/or improve the exchange of information between supply cha...

  3. Markov chains and decision processes for engineers and managers

    CERN Document Server

    Sheskin, Theodore J

    2010-01-01

    Markov Chain Structure and ModelsHistorical NoteStates and TransitionsModel of the WeatherRandom WalksEstimating Transition ProbabilitiesMultiple-Step Transition ProbabilitiesState Probabilities after Multiple StepsClassification of StatesMarkov Chain StructureMarkov Chain ModelsProblemsReferencesRegular Markov ChainsSteady State ProbabilitiesFirst Passage to a Target StateProblemsReferencesReducible Markov ChainsCanonical Form of the Transition MatrixTh

  4. Integrating process and ontology to support supply chain modelling

    OpenAIRE

    2011-01-01

    Abstract Many researchers have recognized a lack of common framework to support supply chain modelling and analysis and proposed their solutions accordingly. Majority of the approaches proposed are more concerned with building an object model of a supply chain than identifying processes which realistically describe a supply chain. Though object models provide means or building blocks necessary to model and analyse different elements of a supply chain, an absence of supply chain pro...

  5. The Invariance Principle for p-(→θ) Chain

    Institute of Scientific and Technical Information of China (English)

    Di He HU; Zheng Yan XIAO

    2007-01-01

    There are two parts in this paper. In the first part we construct the Maxkov chain in random environment(MCRE), the skew product Markov chain and p-(→θ) chain from a random transition matrix and a two-dimensional probability distribution, and in the second part we prove that the invariance principle for p-(→θ) chain, a more complex non-homogeneons Markov chain, is true under some reasonable conditions. This result is more powerful.

  6. Supply Chain Strategy: Empirical Case Study in Europe and Asia

    OpenAIRE

    Ilkka Sillanpää; Sebastian Sillanpää

    2014-01-01

    The purpose of this case study research is to present a literature review of supply chain strategy approaches, develop supply chain strategy framework and to validate a framework in empirical case study. Literature review and case study research are the research methods for this research. This study presents the supply chain strategy framework which merges together business environment, corporate strategy, supply chain demand and supply chain strategy. Research argues that all the different c...

  7. Risk Management in Supply Chain using Consistent Fuzzy Preference Relations

    OpenAIRE

    Ahmad Jafarnejad; Mehran Ebrahimi; Mohammad Ali Abbaszadeh; Seyed Mehdi Abtahi

    2014-01-01

    Nowadays, supply chains are exposed to numerous risks. Thus, to success in risky business environment, it is imperative for firms to systematically manage supply chain risks. Risk management is the identification, assessment, and prioritization of supply chain risks. The purpose of this paper is to propose a comprehensive approach to risk management in supply chains. Thus, by an appropriate review of the literature, supply chain risk sources are identified in six areas. Then, a CFPR method is...

  8. The Electron Transport Chain: An Interactive Simulation

    Science.gov (United States)

    Romero, Chris; Choun, James

    2014-01-01

    This activity provides students an interactive demonstration of the electron transport chain and chemiosmosis during aerobic respiration. Students use simple, everyday objects as hydrogen ions and electrons and play the roles of the various proteins embedded in the inner mitochondrial membrane to show how this specific process in cellular…

  9. Local Dynamics in an Infinite Harmonic Chain

    Directory of Open Access Journals (Sweden)

    M. Howard Lee

    2016-04-01

    Full Text Available By the method of recurrence relations, the time evolution in a local variable in a harmonic chain is obtained. In particular, the autocorrelation function is obtained analytically. Using this result, a number of important dynamical quantities are obtained, including the memory function of the generalized Langevin equation. Also studied are the ergodicity and chaos in a local dynamical variable.

  10. Detonation Structure Under Chain Branching Kinetics

    Science.gov (United States)

    Liang, Z.; Bauwens, L.

    2006-07-01

    Hydrogen-oxygen chemistry is characterized by a chain branching mechanism that yields three explosion limits. While a detailed kinetic scheme appropriate for hydrogen-oxygen should produce correct results, in many circumstances, a simpler yet reasonably realistic model will be warranted. In particular, it is easier to develop a clear understanding of the reaction zone structure using a simpler model, that includes only the key mechanisms. To that effect, we consider a four-step chain branching scheme that exhibits an explosion behavior with three limits, which behaves at least qualitatively like hydrogen chemistry. We focus in particular on the structure of the initiation and chain branching zones, using a combination between numerical simulation and analysis. Numerical simulations using this chemical model show distinctive keystone figures in the flow field, close to observations in hydrogen-oxygen detonation experiments. The structure of the chain branching zone is resolved using a perturbation analysis, which clarifies the differences between explosion and no-explosion regions and allows for an evaluation of the induction length in the steady wave. The analysis assumes both high activation energy and a slow initiation. Three cases are identified, respectively, with pressure and temperature located within the explosion region, close to the explosion limit and within the no-explosion region. The induction length is shorter and the reaction rate is faster by several orders of magnitude in the explosion region.

  11. An RFID middleware for supply chain management

    Directory of Open Access Journals (Sweden)

    Artur Pinto Carneiro

    2011-12-01

    Full Text Available RFID (Radio Frequency Identification systems for identification and tracking of products and equipments have been progressively adopted as an essential tool for supply chain management, a production environment where the members usually share with each other their own logistic and management systems. Therefore, the development of supply chain RFID systems can be strongly simplified through the inclusion of an intermediate software layer – the middleware – responsible for the creation of interfaces to integrate all the heterogeneous software components. In this article we present a case study developed at IPT (Instituto de Pesquisas Tecnológicas do Estado de São Paulo which gave rise to a middleware prototype able to implement the required software integration on the supply chain of an electric power distribution company. The developed middleware is used to manage the interactions with a heterogeneous group of mobile devices  cell phones, handhelds and data colectors,  operated by different supply chain agents that grab data associated to various processes executed by a given electric power distribution equipment during its life cycle and transfer those data to a central database in order to share them with all the logistic and management corporation systems.

  12. Anaerobic digestion in sustainable biomass chains

    NARCIS (Netherlands)

    Pabon Pereira, C.P.

    2009-01-01

    This thesis evaluates the potential contribution of anaerobic digestion (AD) to the sustainability of biomass chains. Results provide insights in the technological potential to recover energy and valuable by-products from energy crops and residues, and evaluate biomass cascades involving AD technolo

  13. The science of sustainable supply chains.

    Science.gov (United States)

    O'Rourke, Dara

    2014-06-06

    Recent advances in the science and technology of global supply chain management offer near-real-time demand-response systems for decision-makers across production networks. Technology is helping propel "fast fashion" and "lean manufacturing," so that companies are better able to deliver products consumers want most. Yet companies know much less about the environmental and social impacts of their production networks. The failure to measure and manage these impacts can be explained in part by limitations in the science of sustainability measurement, as well as by weaknesses in systems to translate data into information that can be used by decision-makers inside corporations and government agencies. There also remain continued disincentives for firms to measure and pay the full costs of their supply chain impacts. I discuss the current state of monitoring, measuring, and analyzing information related to supply chain sustainability, as well as progress that has been made in translating this information into systems to advance more sustainable practices by corporations and consumers. Better data, decision-support tools, and incentives will be needed to move from simply managing supply chains for costs, compliance, and risk reduction to predicting and preventing unsustainable practices.

  14. Hybrid ion chains inside an optical cavity

    Science.gov (United States)

    Zhou, Zichao; Siverns, James; Quraishi, Qudsia

    2016-05-01

    Trapped ions remain a leading candidate for the implementation of large-scale quantum networks. These networks require nodes that can store and process quantum information as well as communicate with each other though photonic flying qubits. We propose to use hybrid ion chains of barium, for communication, and ytterbium, for quantum information processing. We report on progress in setting up a hybrid ion chain in a versatile four-blade trap using high numerical aperture collection optics. Although the visible photons produced from barium ions are more favorable as they are not suitable for long distance fiber communication. With this in mind, we intend to implement frequency conversion to overcome this issue. Also, with the view toward increasing the flying-qubit production rate, we propose a cavity-based system to enhance interactions between the ions and photons. The cavity axis is to be placed along the axial direction of the trap allowing a chain of multiple ions to interact with the cavity at the same time. With this configuration the atom-photon coupling strength can be improved by sqrt(N), where N is the number of ions. Experiments will focus on exploring the dynamics of hybrid ion chain, dual species quantum information processing, two-colour entanglement and phase gates assisted by the ion-cavity coupling are to be explored.

  15. Determining Annealing Temperatures for Polymerase Chain Reaction

    Science.gov (United States)

    Porta, Angela R.; Enners, Edward

    2012-01-01

    The polymerase chain reaction (PCR) is a common technique used in high school and undergraduate science teaching. Students often do not fully comprehend the underlying principles of the technique and how optimization of the protocol affects the outcome and analysis. In this molecular biology laboratory, students learn the steps of PCR with an…

  16. Polymerase Chain Reaction for Educational Settings.

    Science.gov (United States)

    Garrison, Stephen J.; dePamphillis, Claude

    1994-01-01

    Suggests the incorporation of the Polymerase Chain Reaction (PCR) technique into high school and college biology laboratories. Discusses the following sections: (1) current PCR applications; (2) PCR technique; (3) Manual and Machine PCR; (4) Manual PCR Preparations and Procedure; (5) Materials, Supplies, and Recipes; (6) Primer Selection; and (7)…

  17. Segmentation and Recognition of Handwritten Numeric Chains

    Directory of Open Access Journals (Sweden)

    Salim Ouchtati

    2007-01-01

    Full Text Available Automatic reading of numeric chains has been attempted in several application areas such as bank cheque processing, postal code recognition and form processing. Such applications have been very popular in handwriting recognition research, due to the possibility to reduce considerably the manual effort involved in these tasks. In this study we propose an off line system for the recognition of the handwritten numeric chains. Firstly, study was based mainly on the evaluation of neural network performances, trained with the gradient back propagation algorithm. Used parameters to form the input vector of the neural network are extracted on the binary images of the digits by several methods: distribution sequence, Barr features and centred moments of different projections and profiles. Secondly, study was extented for the reading of the handwritten numeric chains constituted of a variable number of digits. Vertical projection was used to segment the numeric chain at isolated digits and every digit (or segment was presented separately to the entry of the system achieved in the first part (recognition system of the isolated handwritten digits. The performances of the proposed system for the used database attain a recognition rate equal to 91.3%.

  18. Roles of supply chain management in construction

    NARCIS (Netherlands)

    Vrijhoef, R.; Koskela, L.

    1999-01-01

    Supply chain management (SCM) is a concept that has flourished in manufacturing, originating from Just-In-Time (JIT) production and logistics. Today, SCM represents an autonomous managerial concept, although still largely dominated by logistics. SCM endeavors to observe the entire scope of the suppl

  19. Fundamental Perspectives on Supply Chain Management

    NARCIS (Netherlands)

    Omta, S.W.F.; Hoenen, S.J.

    2012-01-01

    The aim of the present literature study is to find the fundamental perspectives/models in the realm of supply chain management and to investigate whether they can be extended based on recent literature findings. The fundamental perspectives were found using a two-tier snowball collection method, inc

  20. Sub Saharan Africa Food Value Chains

    DEFF Research Database (Denmark)

    Butler, Ivan Harry

    2016-01-01

    Study of food value chains in East Africa as a preliminary study. The paper wishes to underline a few under-researched assumptions about esepcially protein deficiencies, allergies etc. to establish what enablers and constraints exist when trying to supply food from e.g. Europe to e.g. East Africa...

  1. Bordetella pertussis diagnosed by polymerase chain reaction

    DEFF Research Database (Denmark)

    Birkebaek, N H; Heron, I; Skjødt, K

    1994-01-01

    The object of this work was to test the polymerase chain reaction (PCR) for demonstration of Bordetella pertussis (BP) in nasopharyngeal secretions. The method was applied to patients with recently diagnosed pertussis, as verified by BP culture. In order to test the sensitivity and specificity of...

  2. Policy Reform and Supply Chain Governance

    NARCIS (Netherlands)

    Vellema, S.; Laven, A.; Ton, G.; Muilerman, S.

    2016-01-01

    This chapter looks at the degree of state involvement and the modes of market governance in the cocoa value chains of Ghana, Côte d’Ivoire, and Ecuador, in order to document the institutional blending of private and public economic governance. Liberalization in the cocoa sectors transformed the role

  3. Compilation Tool Chains and Intermediate Representations

    DEFF Research Database (Denmark)

    Mottin, Julien; Pacull, François; Keryell, Ronan;

    2014-01-01

    In SMECY, we believe that an efficient tool chain could only be defined when the type of parallelism required by an application domain and the hardware architecture is fixed. Furthermore, we believe that once a set of tools is available, it is possible with reasonable effort to change hardware ar...

  4. Electron transport chains of lactic acid bacteria

    NARCIS (Netherlands)

    Brooijmans, R.J.W.

    2008-01-01

    Lactic acid bacteria are generally considered facultative anaerobic obligate fermentative bacteria. They are unable to synthesize heme. Some lactic acid bacteria are unable to form menaquinone as well. Both these components are cofactors of respiratory (electron transport) chains of prokaryotic bact

  5. Double counting in supply chain carbon footprinting

    NARCIS (Netherlands)

    F. Caro (Felipe); M.A. Corbett (Mark); T. Tan (Terence); R.A. Zuidwijk (Rob)

    2013-01-01

    textabstractCarbon footprinting is a tool for firms to determine the total greenhouse gas (GHG) emissions associated with their supply chain or with a unit of final product or service. Carbon footprinting typically aims to identify where best to invest in emission reduction efforts, and/or to determ

  6. Design of supply chain in fuzzy environment

    Science.gov (United States)

    Rao, Kandukuri Narayana; Subbaiah, Kambagowni Venkata; Singh, Ganja Veera Pratap

    2013-05-01

    Nowadays, customer expectations are increasing and organizations are prone to operate in an uncertain environment. Under this uncertain environment, the ultimate success of the firm depends on its ability to integrate business processes among supply chain partners. Supply chain management emphasizes cross-functional links to improve the competitive strategy of organizations. Now, companies are moving from decoupled decision processes towards more integrated design and control of their components to achieve the strategic fit. In this paper, a new approach is developed to design a multi-echelon, multi-facility, and multi-product supply chain in fuzzy environment. In fuzzy environment, mixed integer programming problem is formulated through fuzzy goal programming in strategic level with supply chain cost and volume flexibility as fuzzy goals. These fuzzy goals are aggregated using minimum operator. In tactical level, continuous review policy for controlling raw material inventories in supplier echelon and controlling finished product inventories in plant as well as distribution center echelon is considered as fuzzy goals. A non-linear programming model is formulated through fuzzy goal programming using minimum operator in the tactical level. The proposed approach is illustrated with a numerical example.

  7. The future of the healthcare supply chain.

    Science.gov (United States)

    Parker, Jeff; DeLay, Dan

    2008-04-01

    To achieve savings in the healthcare supply chain, healthcare organizations need to cooperate instead of compete. By forming a consolidated service center (CSC), healthcare organizations can centralize their contracting, procurement, distribution, and logistical operations. The CSC would enable organizations to improve efficiency and reduce costs.

  8. Quantitative timed analysis of interactive Markov chains

    NARCIS (Netherlands)

    Guck, Dennis; Han, Tingting; Katoen, Joost-Pieter; Neuhausser, M.

    2012-01-01

    This paper presents new algorithms and accompanying tool support for analyzing interactive Markov chains (IMCs), a stochastic timed 1 1/2-player game in which delays are exponentially distributed. IMCs are compositional and act as semantic model for engineering formalisms such as AADL and dynamic fa

  9. A Martingale Decomposition of Discrete Markov Chains

    DEFF Research Database (Denmark)

    Hansen, Peter Reinhard

    We consider a multivariate time series whose increments are given from a homogeneous Markov chain. We show that the martingale component of this process can be extracted by a filtering method and establish the corresponding martingale decomposition in closed-form. This representation is useful fo...

  10. Logistics Chains in Freight Transport Modelling

    NARCIS (Netherlands)

    Davydenko, I.Y.

    2015-01-01

    The flow of trade is not equal to transport flows, mainly due to the fact that warehouses and distribution facilities are used as intermediary stops on the way from production locations to the points of consumption or further rework of goods. This thesis proposes a logistics chain model, which estim

  11. Document Ranking Based upon Markov Chains.

    Science.gov (United States)

    Danilowicz, Czeslaw; Balinski, Jaroslaw

    2001-01-01

    Considers how the order of documents in information retrieval responses are determined and introduces a method that uses a probabilistic model of a document set where documents are regarded as states of a Markov chain and where transition probabilities are directly proportional to similarities between documents. (Author/LRW)

  12. Markov Chain Estimation of Avian Seasonal Fecundity

    Science.gov (United States)

    To explore the consequences of modeling decisions on inference about avian seasonal fecundity we generalize previous Markov chain (MC) models of avian nest success to formulate two different MC models of avian seasonal fecundity that represent two different ways to model renestin...

  13. Multi-dimensional quasitoeplitz Markov chains

    Directory of Open Access Journals (Sweden)

    Alexander N. Dudin

    1999-01-01

    Full Text Available This paper deals with multi-dimensional quasitoeplitz Markov chains. We establish a sufficient equilibrium condition and derive a functional matrix equation for the corresponding vector-generating function, whose solution is given algorithmically. The results are demonstrated in the form of examples and applications in queues with BMAP-input, which operate in synchronous random environment.

  14. Markov chains with quasitoeplitz transition matrix

    Directory of Open Access Journals (Sweden)

    Alexander M. Dukhovny

    1989-01-01

    Full Text Available This paper investigates a class of Markov chains which are frequently encountered in various applications (e.g. queueing systems, dams and inventories with feedback. Generating functions of transient and steady state probabilities are found by solving a special Riemann boundary value problem on the unit circle. A criterion of ergodicity is established.

  15. Supply Chain et Gestion des ressources humaines

    OpenAIRE

    Nondonfaz, Robert

    2010-01-01

    Rappels de quelques exigences de la Supply Chain en matière de gestion des ressources humaines; spécificités de certains métiers : chauffeur, magasinier, acheteur, gestionnaire de stock, gestion des imprévus

  16. Optimization of the air cargo supply chain

    Directory of Open Access Journals (Sweden)

    María Pérez Bernal

    2012-10-01

    Full Text Available Purpose: This paper aims to evaluate and optimize the various operations within the air cargo chain. It pursues to improve the efficiency of the air cargo supply chain and to provide more information to the decision-makers to optimize their fields.Design/methodology/approach: The method used is a process simulation modelling software, WITNESS, which provides information to the decision-makers about the most relevant parameters subject to optimization. The input for the simulation is obtained from a qualitative analysis of the air cargo supply chain with the involved agents and from a study of the external trade by air mode, given that their behaviour depend on the location. The case study is focused on a particular location, the Case of Zaragoza Airport (Spain.Findings: This paper demonstrates that efficiency of the air cargo supply chain can increase by leveraging several parameters such as bottlenecks, resources or warehouses.Originality/value: It explores the use of a simulation modeling software originally intended for manufacturing processes and extended to support decision making processes in the area of air cargo.

  17. Drying of willow biomass in supply chains

    NARCIS (Netherlands)

    Gigler, J.K.

    2000-01-01

    The drying process of willow ( Salix viminalis ) in biomass supply chains to energy plants is quantitatively described. Drying at particle level was modelled for chips and stems by a diffusion equation linked to the mass transfer of moisture to the air. Drying at bulk level is described by a deep be

  18. Eco-Innovation in the Value Chain

    DEFF Research Database (Denmark)

    McAloone, Tim C.; Mougaard, Krestine; Restrepo-Giraldo, John Dairo

    2010-01-01

    processes is often reactive, resulting in a retrospective and insufficient approach. This paper describes the mechanisms, opportunities and barriers for the actual realisation of value chain based eco-innovation, together with a first indication of a methodical approach to realising eco-innovation....

  19. Intelligence Support to Supply Chain Risk Management

    Science.gov (United States)

    2012-06-01

    59 Appendix A - Intelligence Support Storyboard ...plant in New Mexico . This plant was the sole producer of a microchip used in one of Ericsson’s key consumer 16 products and as a result of the...system supply chains. 60 Appendix A - Intelligence Support Storyboard Air University: The Intellectual and Leadership Center of the Air Force

  20. Trade credit and the supply chain

    NARCIS (Netherlands)

    Fabbri, D.; Klapper, L.F.

    2009-01-01

    This paper studies supply chain financing. We investigate why a firm extends trade credit to its customers and how this decision relates to its own financing. We use a novel firm-level database with unique information on market power in both output and input markets and on the amount, terms, and pay

  1. Preventing Chain Saw Injuries After a Disaster

    Centers for Disease Control (CDC) Podcasts

    2006-08-10

    If you must use a chain saw, follow the instructions to be safe. Wear a hard hat, safety glasses, ear plugs, thick work gloves, chaps, and boots.  Created: 8/10/2006 by Emergency Communications System.   Date Released: 9/24/2008.

  2. Quantitative models for sustainable supply chain management

    DEFF Research Database (Denmark)

    Brandenburg, M.; Govindan, Kannan; Sarkis, J.

    2014-01-01

    and reverse logistics has been effectively reviewed in previously published research. This situation is in contrast to the understanding and review of mathematical models that focus on environmental or social factors in forward supply chains (SC), which has seen less investigation. To evaluate developments...

  3. Dark Solitons in FPU Lattice Chain

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Based on multiple scales method, we study the nonlinear properties of a new Fermi-Pasta-Ulam lattice model analytically. It is found that the lattice chain exhibits a novel nonlinear elementary excitation, i.e. a dark soliton.Moreover, the modulation depth of dark soliton is increasing as the anharmonic parameter increases.

  4. Chain exchange in block copolymer micelles

    Science.gov (United States)

    Lu, Jie; Bates, Frank; Lodge, Timothy

    2014-03-01

    Block copolymer micelles are aggregates formed by self-assembly of amphiphilic copolymers dispersed in a selective solvent, driven by unfavorable interactions between the solvent and the core-forming block. Due to the relatively long chains being subject to additional thermodynamic and dynamic constraints (e.g., entanglements, crystallinity, vitrification), block copolymer micelles exhibit significantly slower equilibration kinetics than small molecule surfactants. As a result, details of the mechanism(s) of equilibration in block copolymer micelles remain unclear. This present works focuses on the chain exchange kinetics of poly(styrene-b-ethylenepropylene) block copolymers in squalane (C30H62) using time-resolved small angle neutron scattering (TR-SANS). A mixture of h-squalane and d-squalane is chosen so that it contrast matches a mixed 50/50 h/d polystyrene micelle core. When the temperature is appropriate and isotopically labeled chains undergo mixing, the mean core contrast with respect to the solvent decreases, and the scattering intensity is therefore reduced. This strategy allows direct probing of chain exchange rate from the time dependent scattering intensity I(q, t).

  5. Carbon sp chains in graphene nanoholes

    DEFF Research Database (Denmark)

    Castelli, Ivano Eligio; Ferri, Nicola; Onida, Giovanni

    2012-01-01

    Nowadays sp carbon chains terminated by graphene or graphitic-like carbon are synthesized routinely in several nanotech labs. We propose an ab initio study of such carbon-only materials, by computing their structure and stability, as well as their electronic, vibrational and magnetic properties. We...

  6. Value Chain Development of Avocado in Vietnam

    NARCIS (Netherlands)

    Wertheim-Heck, S.C.O.; Quaedackers, P.; Nguyen Trung Anh,; Wijk, van S.

    2010-01-01

    Rapid economic development, urbanisation and rising income levels, in Vietnam offer potential for pro-poor development, by creating new market opportunities for producers, traders and retailers. This article describes the process of value chain development, which involves all actors in the broad cha

  7. ARN Supply Chain Management System for OCIE

    Science.gov (United States)

    2006-12-30

    Module (IRM), Clothing Initial Issue Point ( CIIP ); Supply Chain Management; Virtual Item Manager/Wholesale Local; Quality Logistics Management...DLA successfully assumed retail inventory at five Army Clothing Initial Issue Points ( CIIPs ), two United Stated Marine Corps Recruit Depots (MCRDs...system provides a “local” capability to manage wholesale inventory assets located at the CIIP including receipt and inventory adjustment processing

  8. Structural organization of the mitochondrial respiratory chain.

    Science.gov (United States)

    Genova, Maria Luisa; Bianchi, Cristina; Lenaz, Giorgio

    2003-03-01

    Two models exist of the mitochondrial respiratory chain: the model of a random organization of the individual respiratory enzyme complexes and that of a super-complex assembly formed by stable association between the individual complexes. Recently Schägger, using digitonin solubilization and Blue Native PAGE produced new evidence of preferential associations, in particular a Complex I monomer with a Complex III dimer, and suggested a model of the respiratory chain (the respirasome) based on direct electron channelling between complexes. Discrimination between the two models is amenable to kinetic testing using flux control analysis. Experimental evidence obtained in beef heart SMP, according to the extension of the Metabolic Control Theory for pathways with metabolic channelling, showed that enzyme associations involving Complex I and Complex III take place in the respiratory chain while Complex IV seems to be randomly distributed, with cytochrome c behaving as a mobile component. Flux control analysis at anyone of the respiratory complexes involved in aerobic succinate oxidation indicated that Complex II and III are not functionally associated in a stable supercomplex. A critical appraisal of the solid-state model of the mitochondrial respiratory chain requires its reconciliation with previous biophysical and kinetic evidence that CoQ behaves as a homogeneous diffusible pool between all reducing enzyme and all oxidizing enzymes: the hypothesis can be advanced that both models (CoQ pool and supercomplexes) are true, by postulating that supercomplexes physiologically exist in equilibrium with isolated complexes depending on metabolic conditions of the cell.

  9. Complementary Theories to Supply Chain Management

    DEFF Research Database (Denmark)

    Halldorsson, Arni; Hsuan, Juliana; Kotzab, Herbert

    Borrowing from complementary theories has become an important part of theorizing SCM. We build upon principal-agent theory (PAT), transaction cost analysis (TCA), network theory (NT), and resource-based view (RBV) to provide insights on how to structure a supply chain and manage it. Through...

  10. Supply Chain Management som interaktionel praksis

    DEFF Research Database (Denmark)

    Smith, Leo Feddersen; Lund, Anders

    2016-01-01

    I dette bidrag undersøger vi Supply Chain Management som en interaktionel praksis forankret i kommunikation. Med udgangspunkt i e-mail korrespondancer undersøger vi, hvordan køber-leverandør forholdet kommunikativt konstitueres mellem to danske SMVer og deres kinesiske leverandører. Det...

  11. Designing Sustainable Supply Chains for Biofuels

    Science.gov (United States)

    Driven by the Energy and Independence Act of 2007 mandate to increase production of alternative fuels and to ensure that this increase causes minimal environmental impact, a project to design sustainable biofuel supply chains has been developed. This effort uses life cycle asses...

  12. Sustainability assessment of food chain logistics

    NARCIS (Netherlands)

    Bloemhof, J.M.; Vorst, van der J.G.A.J.; Bastl, M.; Allaoui, H.

    2015-01-01

    Food chain logistics plays an important role in the sustainability performance of the food sector. Therefore, project SCALE (Step Change in Agri-food Logistics Ecosystems) started as a collaborative international project, aiming for tools and frameworks for the food sector to make a step change in o

  13. Energy Chain Analysis of Passenger Car Transport

    Directory of Open Access Journals (Sweden)

    Hans Jakob Walnum

    2011-02-01

    Full Text Available Transport makes up 20 percent of the World’s energy use; in OECD countries this has exceeded 30 percent. The International Energy Agency (IEA estimates that the global energy consumption will increase by 2.1 percent annually, a growth rate that is higher than for any other sector. The high energy consumption means that transportation accounts for nearly 30 percent of CO2 emission in OECD countries and is also one of the main sources of regional and local air pollution. In this article, we analyze energy consumption and greenhouse gas emissions from passenger car transport using an energy chain analysis. The energy chain analysis consists of three parts: the net direct energy use, the energy required for vehicle propulsion; the gross direct chain, which includes the net direct energy consumption plus the energy required to produce it; and, finally, the indirect energy chain, which includes the energy consumption for production, maintenance and operation of infrastructure plus manufacturing of the vehicle itself. In addition to energy consumption, we also analyze emissions of greenhouse gases measured by CO2-equivalents. We look at the trade-offs between energy use and greenhouse gas emissions to see whether some drivetrains and fuels perform favourable on both indicators. Except for the case of electric cars, where hydropower is the only energy source in the Norwegian context, no single car scores favourably on both energy consumption and greenhouse gas emissions.

  14. Supply Chain Sourcing Game: A Negotiation Exercise

    Science.gov (United States)

    Gumus, Mehmet; Love, Ernie C.

    2013-01-01

    This article introduces an exercise that simulates the negotiation process in a dynamic supply chain. The retailer and wholesaler roles are assigned to student groups who negotiate supply contracts in a number of rounds during a class period. Each group makes pricing, inventory, and ordering decision concurrently, and competes with others to…

  15. Designing Sustainable Supply Chains (Journal Article)

    Science.gov (United States)

    The Office of Research and Development within the U.S. Environmental Protection Agency (EPA) has recently put forth a new vision for environmental protection that states that sustainability is our “True North”. In support of this new vision, an effort to design supply chains to ...

  16. Corporate Social Responsibility in Global Value Chains

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter; Lindgreen, Adam

    2014-01-01

    We outline the drivers, main features, and conceptual underpinnings of the compliance paradigm. We then use a similar structure to investigate the drivers, main features, and conceptual underpinnings of the cooperative paradigm for working with CSR in global value chains. We argue that the measur...

  17. Belts and Chains. FOS: Fundamentals of Service.

    Science.gov (United States)

    John Deere Co., Moline, IL.

    This manual on belts and chain drives is one of a series of power mechanics texts and visual aids on theory, of operation, diagnosis, and repair of automotive and off-the-road agricultural and construction equipment. Materials provide basic information and illustrations for use by vocational students and teachers as well as shop servicemen and…

  18. Mentoring: Forging New Links onto the Chain.

    Science.gov (United States)

    Welty, Kenneth

    2000-01-01

    Uses a chain metaphor for describing mentoring, a nurturing process in which an accomplished professional serves as role model, sponsor, master teacher, and career counselor for a promising novice. Suggests that more mentors are needed to encourage others to become or remain technology education teachers. (JOW)

  19. Effective food supply chains; generating, modelling and evaluating supply chain scenarios

    OpenAIRE

    Vorst, van der, J.G.A.J.

    2000-01-01

    Logistical co-ordination in FMCG supply chainsThe overall objectives of the research described in this thesis were to obtain insight into the applicability of the concept Supply Chain Management (SCM) in food supply chains (SCs) from a logistical point of view, and to find an efficient and effective method to analyse and redesign the SC to improve SC performance.BackgroundThe background and rationale of this thesis are discussed in Chapter 1. Interest in SCM has been spurred by recent socio-e...

  20. Studies on Single Chain Structure of Konjac Glucomannan

    Institute of Scientific and Technical Information of China (English)

    PANG Jie; SUN Yu-Jing; SUN Yuan-Ming

    2006-01-01

    The simulation is carried out by employing the method of molecular dynamics with the single chain of konjac glucomannan (KGM) in vacuum as the structural model to discuss the factors that affect the single chain structure, the dynamic structure of the chain and the acting forces that maintain the chain structure. The results show that the shape and stability of the chain are affected by the degree of polymerization. As for the KGM with high degree of polymerization, its chain presents random coiling state and its stability declines. Both before and after deacetylation in the process of dynamic motion, the chain of KGM presents random coiling state with periodic variation of extension and coil and demonstrates favorable flexibility, indicating acetyl is not the main factor that affects the shape of chain, whereas dihedral angle and static actions are respectively the key bonding and nonbonding acting forces that influence the single chain conformations in vacuum.

  1. A Novel Algorithm for the Generation of Distinct Kinematic Chain

    Science.gov (United States)

    Medapati, Sreenivasa Reddy; Kuchibhotla, Mallikarjuna Rao; Annambhotla, Balaji Srinivasa Rao

    2016-07-01

    Generation of distinct kinematic chains is an important topic in the design of mechanisms for various industrial applications i.e., robotic manipulator, tractor, crane etc. Many researchers have intently focused on this area and explained various processes of generating distinct kinematic chains which are laborious and complex. It is desirable to enumerate the kinematic chains systematically to know the inherent characteristics of a chain related to its structure so that all the distinct chains can be analyzed in depth, prior to the selection of a chain for a purpose. This paper proposes a novel and simple method with set of rules defined to eliminate isomorphic kinematic chains generating distinct kinematic chains. Also, this method simplifies the process of generating distinct kinematic chains even at higher levels i.e., 10-link, 11-link with single and multiple degree of freedom.

  2. SIMULATING THE SUPPLY DISRUPTION FOR THE COORDINATED SUPPLY CHAIN

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    There are many disruptive accidents in the supply chain operations system and achieving the coordination of supply chain is main objective for supply chain research. While disruptive accidents have increasingly influenced the coordinated operation of the supply chain, existing research literature on the supply chain coordination is setting in a stationary environment. The answer for how the disruptive accidents affect the coordinated supply chain is given in this paper. Based on the benchmark supply chain which is coordinated by the negative incentive mechanism, we study the impacts of supply disruption on the supply chain system by using simulation approach in which two different distribution function of random variable are used to express the supply disruption. Comparison between these two simulation results and possible coordination mechanism under the supply disruption are proposed. From the perspective of supply chain risk management, we provide the inspiration for the manager.

  3. Developing Model for Supply Chain Management - the Case of Croatia

    Directory of Open Access Journals (Sweden)

    E. Jurun

    2004-01-01

    Full Text Available This paper describes a model of supply chain management (SCM. It explains overall supply chain issues, strategic importance of SCM, supply chain strategies and an example of mathematical formulation. A supply chain is a global network of organizations that cooperate to improve the flows of material and information between suppliers and customers at the lowest cost and the highest speed. The objective of a supply chain is customer satisfaction. At the strategic level, a supply chain can be considered as being composed of five activities: buy, make, move, store and sell. Each activity is a module. The set of modules, along with its links, constitutes a model of the supply chain. Our paper presents some insights into the supply chain strategies of companies in Croatia. The major goal of this paper is to show a model for supply chain management in mathematical terms, with an example of mathematical formulation.

  4. Supply Chain Collaboration under Uncertainty in the Albanian Beer Market

    Directory of Open Access Journals (Sweden)

    Denisa MAMILLO

    2015-03-01

    Full Text Available Today supply chain uncertainty is higher due to the global crisis, the fast changing technology and the increasing vulnerability of supply chains. Companies use different strategies to reduce uncertainty, like building agile supply chains, increasing resilience, postponement, etc. All these strategies require strong supply chain collaboration. Although research interest in supply chain collaboration is growing, no research has been done in Albania. This paper is one of the first to investigate supply chain management practices and the extent of supply chain collaboration in the Albanian beer industry. The aim of this research is twofold: first, to investigate how supply chain uncertainty influences the extent of collaboration with the supply chain members, and second, to analyze how organizational culture facilitates the collaboration process. Semi-structured interviews were conducted with the managers of the main beer companies. A guide questionnaire was prepared. It consisted of open and rate-scale questions about supply chain collaboration, supply chain uncertainty, supply chain management practices and organizational culture. The research will show that a high level of supply chain uncertainty does not always lead to a high degree of collaboration with the supply chain members. Organizational culture is the key driver of a successful collaboration. Not all types of culture can facilitate collaboration but only the ones with an external orientation.

  5. Supporting Smallholders to Access Sustainable Supply Chains : Lessons from the Indian Cotton Supply Chain

    NARCIS (Netherlands)

    Fayet, Laia; Vermeulen, Walter J V

    2014-01-01

    A significant number of different sustainable initiatives have emerged to improve sustainability and inclusion of small farmers in global supply chains. These include production process adjustment advice and implementation of different sustainable product standards. In practice two different approac

  6. Supporting Smallholders to Access Sustainable Supply Chains: Lessons form the Indian Cotton Supply Chain

    NARCIS (Netherlands)

    Fayet, L.; Vermeulen, W.J.V.

    2013-01-01

    A significant number of different sustainable initiatives have emerged to improve sustainability and inclusion of small farmers in global supply chains. These include production process adjustment advice and implementation of different sustainable product standards. In practice two different approac

  7. Disordered ground states in a quantum frustrated spin chain with side chains

    Science.gov (United States)

    Takano, Ken'Ichi; Hida, Kazuo

    2008-04-01

    We study a frustrated mixed spin chain with side chains, where the spin species and the exchange interactions are spatially varied. A nonlinear σ model method is formulated for this model, and a phase diagram with two disordered spin-gap phases is obtained for typical cases. Among them, we examine the case with a main chain, which consists of an alternating array of spin-1 and spin- (1)/(2) sites, and side chains, each of which consists of a single spin- (1)/(2) site, in great detail. Based on numerical, perturbational, and variational approaches, we propose a singlet cluster solid picture for each phase, where the ground state is expressed as a tensor product of local singlet states.

  8. Dynein modifiers in C. elegans: light chains suppress conditional heavy chain mutants.

    Directory of Open Access Journals (Sweden)

    Sean M O'Rourke

    2007-08-01

    Full Text Available Cytoplasmic dynein is a microtubule-dependent motor protein that functions in mitotic cells during centrosome separation, metaphase chromosome congression, anaphase spindle elongation, and chromosome segregation. Dynein is also utilized during interphase for vesicle transport and organelle positioning. While numerous cellular processes require cytoplasmic dynein, the mechanisms that target and regulate this microtubule motor remain largely unknown. By screening a conditional Caenorhabditis elegans cytoplasmic dynein heavy chain mutant at a semipermissive temperature with a genome-wide RNA interference library to reduce gene functions, we have isolated and characterized twenty dynein-specific suppressor genes. When reduced in function, these genes suppress dynein mutants but not other conditionally mutant loci, and twelve of the 20 specific suppressors do not exhibit sterile or lethal phenotypes when their function is reduced in wild-type worms. Many of the suppressor proteins, including two dynein light chains, localize to subcellular sites that overlap with those reported by others for the dynein heavy chain. Furthermore, knocking down any one of four putative dynein accessory chains suppresses the conditional heavy chain mutants, suggesting that some accessory chains negatively regulate heavy chain function. We also identified 29 additional genes that, when reduced in function, suppress conditional mutations not only in dynein but also in loci required for unrelated essential processes. In conclusion, we have identified twenty genes that in many cases are not essential themselves but are conserved and when reduced in function can suppress conditionally lethal C. elegans cytoplasmic dynein heavy chain mutants. We conclude that conserved but nonessential genes contribute to dynein function during the essential process of mitosis.

  9. Levels & Barriers to Supply Chain Integration: A conceptual model of Supply Chain Performance

    OpenAIRE

    RajaIrfan Sabir; Muhammad Irfan

    2014-01-01

    In modern business scenario Supply chain has become the back bone for every business organization. All supply chain partners are joined together in value delivery network of company that no one can perform better without support of other. The ultimate objective of this cohesive relationship is to deliver value to customers and gets desired state of customer satisfaction & loyalty for the organization. For this purpose it is necessary to integrate the internal and external partners of Supply c...

  10. Returns management in the supply chain

    Directory of Open Access Journals (Sweden)

    Anna Maria Jeszka

    2014-09-01

    Full Text Available Background:  The aim of this exploratory empirical research was to evaluate the level of cooperation in the area of reverse logistics between selected retail chains and logistics operators and suppliers; to identify and evaluate the influence the procedures of handling returns have on the relationships with customers, cost reduction, value recovery, inventory reduction and increasing profitability; as well as determining to what extent logistics operators are involved in the procedures of handling returns in the analysed chains. Methods: Based on the literature and the experience of researchers from developed countries a questionnaire was constructed which was subsequently used to conduct empirical research in selected retail chains operating in two provinces in Poland. The questionnaire survey involved the sales personnel of selected retail chains in the clothing industry. Overall, 105 questionnaires were collected and analysed. Results: Various aspects of cooperation with suppliers and logistics operators in respect of handling returns were evaluated. Most indicators of cooperation were evaluated favourably, with the exception of joint access to the database, the use of inventory data available online, and access to information from the warehouse, which received low marks from the respondents. In the case of the studied stores, some of the activities in the area of reverse logistics are outsourced; for example, obtaining products from users, logistics, and the transport of returns are typically done by an outside operator. Inspection, sorting, appraisal, repairs, as well as the sales of refurbished products are usually performed within the studied retail corporations. Conclusions: The research has shown that the retail chains developed very good programmes for handling returns in the supply chain, as evidenced by the presented and highly rated indicators of cooperation, with the exception of information exchange where there is still much

  11. Electric Power Supply Chain Management Addressing Climate Change

    DEFF Research Database (Denmark)

    Wang, Xiao-Hui; Cong, Ronggang

    2012-01-01

    change. The study compared the difference between electric power supply chain management and traditional supply chain management. Furthermore, some possible research topics are addressed. The aim of this paper was to promote the application of supply chain management in the China electricity sector......Supply chain management played a critical role in the electric power industrial chain optimization. The purpose of this paper was to review a sample of the literature relating to supply chain management and its possible applications in electricity power system, especially in the context of climate...... optimizations and brought a change in the related government policy options....

  12. CALCULATION OF CONFORMATIONAL ENTROPY AND FREE ENERGY OF POLYSILANE CHAIN

    Institute of Scientific and Technical Information of China (English)

    Meng-bo Luo; Ying-cai Chen; Jian-hua Huang; Jian-min Xu

    2001-01-01

    The conformational entropy S and free energy F were calculated by exact enumeration of polysilane chain up to 23 segments with excluded volume (EV) and long-range van der Waals (VW) interaction. A nonlinear relation between SEV+VW and chain length n was found though SEV was found to vary linearly with n. We found that the second-order transition temperature of polysilane chain with VW interaction increases with the increase of chain length, while that of polysilane chain without VW interaction is chain length independent. Moreover, the free energies FEV+VW and FEV are both linearly related with n, and FEV+VW<FEV for all temperatures.``

  13. Delivering Sustainability Through Supply Chain Distribution Network Redesign

    Directory of Open Access Journals (Sweden)

    Denise Ravet

    2013-09-01

    Full Text Available Purpose - Companies could gain (cost, service, green/sustainable competitive advantage through the supply chain network. The goal of this article is to study how to deliver sustainability through the supply chain distribution network redesign.Design/methodology/approach - A literature review is conducted to examine research relating to sustainable supply chain strategies and supply chain distribution network redesign.Findings - A study of the supply chain literature reveals the importance to rethink the supply chain distribution network design and to treat sustainability as integral to operations.

  14. Cost And Environmental Optimization Of Waste Supply Chains Using Clca

    DEFF Research Database (Denmark)

    Sacchi, Romain; Wæhrens, Brian Vejrum; Prosman, Ernst Johannes

    2016-01-01

    Although circular supply chains are widely perceived as a huge leap towards a more environmentally friendly economy, supply chain literature lacks environmental supplier selection criteria (E-SSC) for circular supply chains. Taking into account the various characteristics of circular supply chains...... such as recycling versus remanufacturing and the related transport and quality of returned products, we identify E-SSC for circular supply chains. We demonstrate the need and applicability of the proposed E-SSC by conducting a life cycle assessment (LCA) in the cement industry. Moreover, in doing so, we explore...... the underlying mechanisms explaining the environmental performance of circular supply chains....

  15. Dynamic self-assembly of 'living' polymeric chains

    Science.gov (United States)

    Deng, Binghui; Shi, Yunfeng

    2017-01-01

    We report a dynamic self-assembly system of 'living' polymeric chains sustained by chemistry using reactive molecular dynamics simulations. The linear polymeric chains consist of self-assembled nanoparticles connected by metastable linker molecules. As such, the polymeric chains, once assembled, undergo spontaneous dissociation driven by thermodynamics. However, with a continuous supply of linker molecules and the stored chemical energy therein, the polymeric chains can survive and maintain a steady state averaged chain length. These dynamically self-assembled polymeric chains are analogous to biological systems that both are thermodynamically metastable, yet dynamically stable upon continuous influx of matter and energy.

  16. Performance measurement for supply chain management and evaluation criteria determination for reverse supply chain management

    Science.gov (United States)

    Kongar, N. Elif

    2004-12-01

    Today, since customers are able to obtain similar-quality products for similar prices, the lead time has become the only preference criterion for most of the consumers. Therefore, it is crucial that the lead time, i.e., the time spent from the raw material phase till the manufactured good reaches the customer, is minimized. This issue can be investigated under the title of Supply Chain Management (SCM). An efficiently managed supply chain can lead to reduced response time for customers. To achieve this, continuous observation of supply chain efficiency, i.e., a constant performance evaluation of the current SCM is required. Widely used conventional performance measurement methods lack the ability to evaluate a SCM since the supply chain is a dynamic system that requires a more thorough and flexible performance measurement technique. Balanced Scorecard (BS) is an efficient tool for measuring the performance of dynamic systems and has a proven capability of providing the decision makers with the appropriate feedback data. In addition to SCM, a relatively new management field, namely reverse supply chain management (RSCM), also necessitates an appropriate evaluation approach. RSCM differs from SCM in many aspects, i.e., the criteria used for evaluation, the high level of uncertainty involved etc., not allowing the usage of identical evaluation techniques used for SCM. This study proposes a generic Balanced Scorecard to measure the performance of supply chain management while defining the appropriate performance measures for SCM. A scorecard prototype, ESCAPE, is presented to demonstrate the evaluation process.

  17. Understanding your supply chain to reduce the risk of supply chain disruption.

    Science.gov (United States)

    Wildgoose, Nick; Brennan, Patrick; Thompson, Simon

    2012-01-01

    Supply chains are at the heart of the way in which organisations operate and compete today; they also play a critical role in overall organisation performance. In the context of increasingly complex and global supply chains, the actions taken to drive down costs are likely to drive risk into the supply chain. The frequency of supply chain disruptions is high and this paper offers practical advice to help reduce the frequency and cost associated with these. There is advice to help with the understanding of how to identify critical suppliers. The reader is guided through comprehensive risk assessment and mitigation approaches and a selection of practical risk solutions and tools that you can use is described. There is a section on the 'dos and don'ts' relating to supplier due diligence. For those organisations facing the challenge of drawing up a business case relating to investment in improving supply chain resiliency, there is also a section outlining some of the business benefits of improving supply chain resiliency.

  18. Anionic synthesis of in-chain and chain-end functionalized polymers

    Science.gov (United States)

    Roy Chowdhury, Sumana

    The objective of this work was to anionically synthesize well-defined polymers having functional groups either at the chain-end or along the polymer chain. General functionalization methods (GFM) were used for synthesizing both kinds of polymers. Chain-end functionalized polymers were synthesized by terminating the anionically synthesized, living polymer chains using chlorodimethylsilane. Hydrosilation reactions were then done between the silyl-hydride groups at the chain-ends and the double bonds of commercially available substituted alkenes. This produced a range of well-defined polymers having the desired functional groups at the chain-ends. In-chain functionalized polymers were synthesized by anionically polymerizing a silylhydride functionalized styrene monomer: (4-vinylphenyl)dimethysilane. Polymerizations were done at room temperature in hydrocarbon solvents to produce well-defined polymers. Functional groups were then introduced into the polymer chains by use of hydrosilation reactions done post-polymerization. The functionalized polymers produced were characterized using SEC, 1H and 13C NMR, FTIR, MALDI TOF mass spectrometry and DSC. The monomer reactivity ratios in the copolymerization of styrene with (4-vinylphenyl)dimethylsilane were also measured. A series of copolymerizaions was done with different molar ratios of styrene(S) and (4-vinylphenyl)dimethylsilane(Si). Three different methods were used to determine the values of the monomer reactivity ratios: Fineman-Ross, Kelen-Tudos and Error-In-Variable (EVM) methods. The average values of the two monomer reactivity ratios obtained were: r Si = 0.16 and rS = 1.74. From these values it was observed that in the copolymerization of styrene with (4-vinylphenyl)dimethylsilane, the second monomer was preferentially incorporated into the copolymer chain. Also, rSirS = 0.27, which shows that the copolymer has a tendency to have an alternating structure. Amino acid-functionalized polymers (biohybrids) were

  19. Slow dynamics in proteins and polymer chains

    Science.gov (United States)

    Hu, Chin-Kun

    2013-02-01

    How a biological system can maintain in a non-equilibrium state for a very long time and why proteins aggregate are still not well understood. In this paper, we first review critical slow down of the Ising model and slow relaxation of a spin-glass model at low temperatures. The data indicate that relaxation of the spin glass model at low temperatures can be slower than the critical slowing down of the Ising model. We then review recent molecular dynamics results for the slow relaxation of polymer chains and experimental data for the glassy behavior of collagen fibrils. The slow dynamics in polymer chains and collagen fibrils can provide clues for understanding why a biological system can maintain in a non-equilibrium state for a very long time, and how to slow down protein aggregation related to neurodegenerative diseases.

  20. Systemic Light Chain Amyloidosis Mimicking Rheumatic Disorders

    Science.gov (United States)

    2016-01-01

    Secondary amyloidosis can complicate chronic inflammatory autoimmune diseases. However, the clinical findings of primary amyloidosis may mimic those of primary rheumatologic disorders. We present the case of a 53-year-old woman who presented with dystrophic nail changes, dry eyes, bilateral carpal tunnel syndrome, Raynaud's phenomenon, and high titer positive nucleolar pattern antinuclear antibody. She was initially misdiagnosed as having Undifferentiated Connective Tissue Disease (UCTD). On further workup, she was eventually diagnosed with lambda light chain systemic amyloidosis by abdominal fat pad biopsy. Her symptoms completely resolved after autologous stem cell transplantation. With this case, we would like to highlight the similarities in the clinical features between light chain amyloidosis and rheumatological disorders. We would also like to emphasize the importance of the prompt recognition of the clinical features of amyloidosis which are crucial to triggering appropriate diagnostic procedures, since early diagnosis is a key to improving outcomes in this disease with an otherwise poor prognosis. PMID:28042297

  1. Collaborative Supply Chain Planning and Coordination

    DEFF Research Database (Denmark)

    Wong, Chee Yew

    This thesis contains main results from an industrial PhD research in the areas of supply chain strategy, planning, and coordination. It applies the concepts of responsiveness and coordination to reduce mismatch of supply and demand, especially for a volatile and seasonal supply chain. It involves...... a series of case studies on the process of planning coordination between a toy manufacturer (LEGO Company) and its major European customers (toy retailers). The thesis presents a plurality of six selected research papers and a main report. These research papers provide case analyses while the main report...... and coordination, the thesis concludes a concept called Coordinated Responsiveness. It finally discusses the main contributions and implications of this research, the reflections on the research process and some future research....

  2. Variable length Markov chains and dynamical sources

    CERN Document Server

    Cénac, Peggy; Paccaut, Frédéric; Pouyanne, Nicolas

    2010-01-01

    Infinite random sequences of letters can be viewed as stochastic chains or as strings produced by a source, in the sense of information theory. The relationship between Variable Length Markov Chains (VLMC) and probabilistic dynamical sources is studied. We establish a probabilistic frame for context trees and VLMC and we prove that any VLMC is a dynamical source for which we explicitly build the mapping. On two examples, the ``comb'' and the ``bamboo blossom'', we find a necessary and sufficient condition for the existence and the unicity of a stationary probability measure for the VLMC. These two examples are detailed in order to provide the associated Dirichlet series as well as the generating functions of word occurrences.

  3. Fisheries management and the value chain

    DEFF Research Database (Denmark)

    Nielsen, Max; Andersen, Peder; Ravensbeck, Lars;

    2017-01-01

    management. The purpose of this paper is to address this gap. The model is applied to the pelagic fisheries of the Northeast Atlantic and considers the whole value chain, identifying resource rent and consumer and producer surpluses. The results show that the sum of the resource rent and the producer surplus......, to a lesser degree, to value chain gains. However, consumers will gain by moving from rent maximization to welfare maximization as long the fish stocks are above MSY levels....... in the harvest sector in 2007 was 32% of the landing value, compared with the maximum economic yield of 49%. Hence, the fisheries were quite well managed. To achieve the maximum sum of the resource rent and the producer surplus in the harvest sector, the fleet must be reduced from 156 vessels to 80 vessels...

  4. Spiropyran main-chain conjugated polymers.

    Science.gov (United States)

    Sommer, Michael; Komber, Hartmut

    2013-01-11

    The first main-chain conjugated copolymers based on alternating spiropyran (SP) and 9,9-dioctylfluorene (F8) units synthesized via Suzuki polycondensation (SPC) are presented. The reaction conditions of SPC are optimized to obtain materials of type P(para-SP-F8) with appreciably high molecular weights up to M(w) ≈ 100 kg mol(-1). (13)C NMR is used to identify the random orientation of the non-symmetric SP unit in P(p-SP-F8). Ultrasound-induced isomerization of P(p-SP-F8) to the corresponding merocyanine form P(p-MC-F8) yields a deep-red solution. This isomerization reaction is followed by (1)H NMR in solution using sonication, whereby the color increasingly changes to deep red. The possibility to incorporate multiple SP units into main-chain polymers significantly broadens existing SP-based polymeric architectures.

  5. The Fast Simulation Chain for ATLAS

    CERN Document Server

    Basalaev, Artem; The ATLAS collaboration

    2016-01-01

    In order to generate the huge number of Monte Carlo events that will be required by the ATLAS experiment over the next several runs, a very fast simulation is critical. Fast detector simulation alone, however, is insufficient: with very high numbers of simultaneous proton-proton collisions expected in Run 3 and beyond, the digitization (detector response emulation) and event reconstruction time quickly become comparable to the time required for detector simulation. The ATLAS Fast Chain simulation has been developed to solve this problem. Modules are implemented for fast simulation, fast digitization, and fast track reconstruction. The application is sufficiently fast -- several orders of magnitude faster than the standard simulation -- that the simultaneous proton-proton collisions can be generated during the simulation job, so Pythia8 also runs concurrently with the rest of the algorithms. The Fast Chain has been built to be extremely modular and flexible, so that each sample can be custom-tailored to match ...

  6. On nonlinear Markov chain Monte Carlo

    CERN Document Server

    Andrieu, Christophe; Doucet, Arnaud; Del Moral, Pierre; 10.3150/10-BEJ307

    2011-01-01

    Let $\\mathscr{P}(E)$ be the space of probability measures on a measurable space $(E,\\mathcal{E})$. In this paper we introduce a class of nonlinear Markov chain Monte Carlo (MCMC) methods for simulating from a probability measure $\\pi\\in\\mathscr{P}(E)$. Nonlinear Markov kernels (see [Feynman--Kac Formulae: Genealogical and Interacting Particle Systems with Applications (2004) Springer]) $K:\\mathscr{P}(E)\\times E\\rightarrow\\mathscr{P}(E)$ can be constructed to, in some sense, improve over MCMC methods. However, such nonlinear kernels cannot be simulated exactly, so approximations of the nonlinear kernels are constructed using auxiliary or potentially self-interacting chains. Several nonlinear kernels are presented and it is demonstrated that, under some conditions, the associated approximations exhibit a strong law of large numbers; our proof technique is via the Poisson equation and Foster--Lyapunov conditions. We investigate the performance of our approximations with some simulations.

  7. Controlling Synfire Chain by Inhibitory Synaptic Input

    Science.gov (United States)

    Shinozaki, Takashi; Câteau, Hideyuki; Urakubo, Hidetoshi; Okada, Masato

    2007-04-01

    The propagation of highly synchronous firings across neuronal networks, called the synfire chain, has been actively studied both theoretically and experimentally. The temporal accuracy and remarkable stability of the propagation have been repeatedly examined in previous studies. However, for such a mode of signal transduction to play a major role in processing information in the brain, the propagation should also be controlled dynamically and flexibly. Here, we show that inhibitory but not excitatory input can bidirectionally modulate the propagation, i.e., enhance or suppress the synchronous firings depending on the timing of the input. Our simulations based on the Hodgkin-Huxley neuron model demonstrate this bidirectional modulation and suggest that it should be achieved with any biologically inspired modeling. Our finding may help describe a concrete scenario of how multiple synfire chains lying in a neuronal network are appropriately controlled to perform significant information processing.

  8. Optimizing sales areas of combined transport chains

    Directory of Open Access Journals (Sweden)

    Philip Michalk

    2013-12-01

    Full Text Available Background: Combined transport chains (such as intermodal transport, have certain advantages. The main advantage from customer points of view is the possibility to bundle freight and thereby decrease transport costs. On the other hand, a combined transport chain can cause longer transport times, due to the necessary transshipment processes. Methods: The area around a terminal, in which a combined service has favourable properties to a customer in comparison to a direct transport, can be understood as a sales-area, in which a combined transport product is marketable. The aim of this paper was to find a method to determine the best shape and size of this area. Results and conclusions: The paper at hand lined out a method in order to calculate such a sales area and determine which geographical points around a terminal have an advantage in comparison to a direct transport service.

  9. A new correlator in quantum spin chains

    Energy Technology Data Exchange (ETDEWEB)

    Keating, J P; Mezzadri, F; Novaes, M [School of Mathematics, University of Bristol, Bristol BS8 1TW (United Kingdom)

    2006-06-16

    We propose a new correlator in one-dimensional quantum spin chains, the s-emptiness formation probability (s-EFP). This is a generalization of the emptiness formation probability (EFP), which is the probability that the first n spins of the chain are all aligned downwards. In the s-EFP we let the spins in question be separated by s sites. The usual EFP corresponds to the special case when s = 1. Taking s > 1 allows us to quantify non-local correlations. We express the s-EFP for the anisotropic XY model in a transverse magnetic field, a system with both critical and non-critical regimes, in terms of a Toeplitz determinant. For the isotropic XY model we find that the magnetic field induces an interesting length scale. (letter to the editor)

  10. Quality tracing in meat supply chains.

    Science.gov (United States)

    Mack, Miriam; Dittmer, Patrick; Veigt, Marius; Kus, Mehmet; Nehmiz, Ulfert; Kreyenschmidt, Judith

    2014-06-13

    The aim of this study was the development of a quality tracing model for vacuum-packed lamb that is applicable in different meat supply chains. Based on the development of relevant sensory parameters, the predictive model was developed by combining a linear primary model and the Arrhenius model as the secondary model. Then a process analysis was conducted to define general requirements for the implementation of the temperature-based model into a meat supply chain. The required hardware and software for continuous temperature monitoring were developed in order to use the model under practical conditions. Further on a decision support tool was elaborated in order to use the model as an effective tool in combination with the temperature monitoring equipment for the improvement of quality and storage management within the meat logistics network. Over the long term, this overall procedure will support the reduction of food waste and will improve the resources efficiency of food production.

  11. The Fast Simulation Chain for ATLAS

    CERN Document Server

    Basalaev, Artem; The ATLAS collaboration

    2017-01-01

    In order to generate the huge number of Monte Carlo events that will be required by the ATLAS experiment over the next several runs, a very fast simulation is critical. Fast detector simulation alone, however, is insufficient: with very high numbers of simultaneous proton-proton collisions expected in Run 3 and beyond, the digitization (detector response emulation) and event reconstruction time quickly become comparable to the time required for detector simulation. The ATLAS Fast Chain simulation has been developed to solve this problem. Modules are implemented for fast simulation, fast digitization, and fast track reconstruction. The application is sufficiently fast - several orders of magnitude faster than the standard simulation - that the simultaneous proton-proton collisions can be generated during the simulation job, so Pythia8 also runs concurrently with the rest of the algorithms. The Fast Chain has been built to be extremely modular and flexible, so that each sample can be custom-tailored to match th...

  12. The Preliminaries of a Reference: Chain

    DEFF Research Database (Denmark)

    Butler, Graham; Sadl, Urska

    2016-01-01

    No decisive ruling was delivered by the Court of Justice of the European Union (hereafter: the Court) in Case C-189/14, Bogdan Chain v Atlanco Ltd. There is usually no case note worth writing without a judgment. However, the case in question came close to being concluded with a judgment, and the ......No decisive ruling was delivered by the Court of Justice of the European Union (hereafter: the Court) in Case C-189/14, Bogdan Chain v Atlanco Ltd. There is usually no case note worth writing without a judgment. However, the case in question came close to being concluded with a judgment......, and the reasons why no conclusive ruling was delivered is precisely what makes this case worth writing about. A preliminary reference was issued by a national court in Nicosia (Cyprus) following which at the Court, a reporting Judge and Advocate General were appointed. An oral hearing in the presence...

  13. Ceramic microfabrication by rapid prototyping process chains

    Indian Academy of Sciences (India)

    R Knitter; W Bauer

    2003-02-01

    Fabrication of micropatterned ceramics or ceramic microparts make high demands on the precision and resolution of the moulding process. As finishing of miniaturised or micropatterned ceramic components is nearly impossible, shaping has to be done by a replication step in the green, unfired state. To avoid high tooling costs in product development, a rapid prototyping process chain has been established that enables rapid manufacturing of ceramic microcomponents from functional models to small lot series within a short time. This process chain combines the fast and inexpensive supply of master models by rapid prototyping with accurate and flexible ceramic manufacturing by low-pressure injection moulding. Besides proper feedstock preparation and sufficient small grain size, the quality of the final components is mainly influenced by the quality of the master model. Hence, the rapid prototyping method must be carefully selected to meet the requirements of the component to be fabricated.

  14. Modeling for Green Supply Chain Evaluation

    Directory of Open Access Journals (Sweden)

    Elham Falatoonitoosi

    2013-01-01

    Full Text Available Green supply chain management (GSCM has become a practical approach to develop environmental performance. Under strict regulations and stakeholder pressures, enterprises need to enhance and improve GSCM practices, which are influenced by both traditional and green factors. This study developed a causal evaluation model to guide selection of qualified suppliers by prioritizing various criteria and mapping causal relationships to find effective criteria to improve green supply chain. The aim of the case study was to model and examine the influential and important main GSCM practices, namely, green logistics, organizational performance, green organizational activities, environmental protection, and green supplier evaluation. In the case study, decision-making trial and evaluation laboratory technique is applied to test the developed model. The result of the case study shows only “green supplier evaluation” and “green organizational activities” criteria of the model are in the cause group and the other criteria are in the effect group.

  15. Fair Micropayment System Based on Hash Chains

    Institute of Scientific and Technical Information of China (English)

    YANG Zongkai; LANG Weimin; TAN Yunmeng

    2005-01-01

    Micropayment schemes usually do not provide fairness, which means that either the customer or the merchant, or both, can cheat each other and gain a financial advantage by misusing the protocols. This paper proposes an efficient hash chain-based micropayment scheme, which is an offline, prepaid scheme that supports simpler divisibility of digital coins. In the execution of payment protocol, the customer's disbursement and the merchant's submittal are performed step by step, whoever cannot gain addition profits even if he breaks off the transaction. The hash chain can also be used for transactions with different merchants. Unlike other micropayment schemes, e.g., PayWord, no public-key operation is required,which improves the efficiency. The scheme also provides restricted anonymity.

  16. Putative respiratory chain of Porphyromonas gingivalis.

    Science.gov (United States)

    Meuric, Vincent; Rouillon, Astrid; Chandad, Fatiha; Bonnaure-Mallet, Martine

    2010-05-01

    The electron transfer chain in Porphyromonas gingivalis, or periodontopathogens, has not yet been characterized. P. gingivalis, a strict anaerobic bacteria and the second colonizer of the oral cavity, is considered to be a major causal agent involved in periodontal diseases. Primary colonizers create a favorable environment for P. gingivalis growth by decreasing oxygen pressure. Oxygen does not appear to be the final electron acceptor of the respiratory chain. Fumarate and cytochrome b have been implicated as major components of the respiratory activity. However, the P. gingivalis genome shows many other enzymes that could be implicated in aerobic or nitrite respiration. Using bioinformatic tools and literature studies of respiratory pathways, the ATP synthesis mechanism from the sodium cycle and nutrients metabolism, the putative respirasome of P. gingivalis has been proposed.

  17. Tunable hybridization in metal nanoshell chains.

    Science.gov (United States)

    Ling, C W; Zheng, M J; Yu, K W

    2011-03-16

    We have studied the coupled surface plasmon (SP) modes in periodic metal nanoshell chains by including long range electromagnetic interactions. The eigen-decomposition method is used to analyze the dispersion and dissipation of the SP modes. The resulting band structure can be understood as a hybridization between a hole band and a particle band with a structurally tunable band gap in the middle of the first Brillouin zone. The mode quality, which is defined as the imaginary part of the generalized polarizability, increases as the shell thickness decreases. This indicates a larger energy loss and an increasing coupling between the bands. Through the manipulation of the band structures, the propagation of the coupled SP modes in the nanoshell chain can be controlled.

  18. Tunable hybridization in metal nanoshell chains

    Energy Technology Data Exchange (ETDEWEB)

    Ling, C W; Zheng, M J; Yu, K W, E-mail: mjzheng@phy.cuhk.edu.hk [Department of Physics, Chinese University of Hong Kong, Shatin, New Territories (Hong Kong)

    2011-03-16

    We have studied the coupled surface plasmon (SP) modes in periodic metal nanoshell chains by including long range electromagnetic interactions. The eigen-decomposition method is used to analyze the dispersion and dissipation of the SP modes. The resulting band structure can be understood as a hybridization between a hole band and a particle band with a structurally tunable band gap in the middle of the first Brillouin zone. The mode quality, which is defined as the imaginary part of the generalized polarizability, increases as the shell thickness decreases. This indicates a larger energy loss and an increasing coupling between the bands. Through the manipulation of the band structures, the propagation of the coupled SP modes in the nanoshell chain can be controlled.

  19. Systemic Light Chain Amyloidosis Mimicking Rheumatic Disorders

    Directory of Open Access Journals (Sweden)

    Rohit R. Rao

    2016-01-01

    Full Text Available Secondary amyloidosis can complicate chronic inflammatory autoimmune diseases. However, the clinical findings of primary amyloidosis may mimic those of primary rheumatologic disorders. We present the case of a 53-year-old woman who presented with dystrophic nail changes, dry eyes, bilateral carpal tunnel syndrome, Raynaud’s phenomenon, and high titer positive nucleolar pattern antinuclear antibody. She was initially misdiagnosed as having Undifferentiated Connective Tissue Disease (UCTD. On further workup, she was eventually diagnosed with lambda light chain systemic amyloidosis by abdominal fat pad biopsy. Her symptoms completely resolved after autologous stem cell transplantation. With this case, we would like to highlight the similarities in the clinical features between light chain amyloidosis and rheumatological disorders. We would also like to emphasize the importance of the prompt recognition of the clinical features of amyloidosis which are crucial to triggering appropriate diagnostic procedures, since early diagnosis is a key to improving outcomes in this disease with an otherwise poor prognosis.

  20. Målstyring i Supply Chain

    DEFF Research Database (Denmark)

    Hald, Kim Sundtoft

    2012-01-01

    Hvordan måler og dokumenterer du dine aktiviteter i Supply Chain? Hvad er konsekvensen af at gøre det – eller at lade være? Vi sætter fokus på udfordringer og formål med brug af nøgletal i forsyningskæder.......Hvordan måler og dokumenterer du dine aktiviteter i Supply Chain? Hvad er konsekvensen af at gøre det – eller at lade være? Vi sætter fokus på udfordringer og formål med brug af nøgletal i forsyningskæder....