Polymerase chain reaction for detection of invasive Shigella flexneri in food.

OpenAIRE

Lampel, K A; Jagow, J A; Trucksess, M; Hill, W E

1990-01-01

The polymerase chain reaction (PCR) was used to amplify a 760-base-pair (bp) fragment with the 220-kbp invasive plasmids of enteroinvasive Escherichia coli, Shigella flexneri, Shigella dysenteriae, Shigella boydii, and Shigella sonnei as templates. This PCR product was easily detected by agarose gel electrophoresis. A 210-bp AccI-PstI fragment lying within the amplified region was used as a probe in Southern hybridization blots and showed that the PCR-generated product was derived from the in...

Estimation of the reaction efficiency in polymerase chain reaction

NARCIS (Netherlands)

Lalam, N.

2006-01-01

Polymerase chain reaction (PCR) is largely used in molecular biology for increasing the copy number of a specific DNA fragment. The succession of 20 replication cycles makes it possible to multiply the quantity of the fragment of interest by a factor of 1 million. The PCR technique has

Concurrent Product & Supply Chain Creation

DEFF Research Database (Denmark)

Gubi, Ebbe

it is a structural premise. We also know that logistics costs generally are estimated 15-20% of total product costs. Accordingly, it stands to reason that a company can reduce costs, and thereby gain an edge on its competitors, by tailoring the supply chain in question to an individual product or product family; i.......e. by creating Focused Supply Chains. At the same time, customer satisfaction can be increased. As a second means to achieving a better fit between product and supply chain, the firm can deploy Design for Logistics, the discipline of considering the supply chain during product creation. The thesis sets out...... and supply chains should be created concurrently and integrated. The concept of Concurrent Product & Supply Chain Creation is introduced, and the two main components Focused Supply Chains and Design For Logistics are explained and exemplified by use of Bang & Olufsen....

Polymerase chain reaction to search for Herpes viruses in uveitic ...

African Journals Online (AJOL)

Objective: To analyse aqueous polymerase chain reaction (PCR) results in patients diagnosed with undifferentiated uveitis ... Cite as: Laaks D, Smit DP, Harvey J. Polymerase chain reaction to search for Herpes viruses in uveitic and healthy eyes: a South African ... may be mild and patients do not seek medical attention.

Chain reaction on de-halogenation of 1,2-dibromotetrafluoroethane and 1,1,2-trichlorotrifluoroethane induced by irradiation in alcohols

International Nuclear Information System (INIS)

Nakagawa, Seiko

2015-01-01

Methanol and 2-propanol solutions of 1,2-dibromotetrafluoroethane and 1,1,2-trichlorotrifluoroethane were irradiated with γ-rays after perfect de-oxygenation. The product, formed by the substitution of one of the bromine or chlorine atoms with a hydrogen atom, was observed by radiation-induced degradation and the product was also de-halogenated. The G-value of de-halogenation was more than a thousand times higher than G(e solv − ) and increased with the decreasing dose rate, meaning that a chain reaction is involved in the process. The efficiency of the degradation in 2-propanol was several times higher than that in methanol. It is concluded that the charge transfer from an alcohol radical will be the trigger of the chain reaction the same as in the degradation of hexachloroethane in alcohol solutions (Sawai et al., 1978). - Highlights: • Halone2402 and Furon113 were de-halogenated by radiation-induced chain reaction in pure alcohol. • The efficiency of the degradation in 2-propanol was several times higher than that in methanol. • The charge transfer from an alcohol radical will be the trigger of the chain reaction

Polymerase chain reaction system using magnetic beads for analyzing a sample that includes nucleic acid

Science.gov (United States)

Nasarabadi, Shanavaz [Livermore, CA

2011-01-11

A polymerase chain reaction system for analyzing a sample containing nucleic acid includes providing magnetic beads; providing a flow channel having a polymerase chain reaction chamber, a pre polymerase chain reaction magnet position adjacent the polymerase chain reaction chamber, and a post pre polymerase magnet position adjacent the polymerase chain reaction chamber. The nucleic acid is bound to the magnetic beads. The magnetic beads with the nucleic acid flow to the pre polymerase chain reaction magnet position in the flow channel. The magnetic beads and the nucleic acid are washed with ethanol. The nucleic acid in the polymerase chain reaction chamber is amplified. The magnetic beads and the nucleic acid are separated into a waste stream containing the magnetic beads and a post polymerase chain reaction mix containing the nucleic acid. The reaction mix containing the nucleic acid flows to an analysis unit in the channel for analysis.

Time-resolved studies of free radicals and laser-initiated chain reactions: Final report, 1 April 1979-31 March 1988

International Nuclear Information System (INIS)

Leone, S.R.

1988-03-01

Pulsed lasers were used in this work to photofragment molecules or to initiate chain reactions. One of the major advances was the availability of high-powered rare gas halide excimer lasers. In addition, pulsed Nd:YAG lasers and dye lasers were used throughout. Results include: generalized kinetic formulations of the problem of laser-initiated chain reactions. Several studies were carried out to explore the details of chain combustion phenomena, slow chain reactions, chain branching behavior, and vibrational temperatures of combusting mixtures. A method to determine the rotational temperature of nitrogen molecules by laser multiphoton ionization was shown. The chain reaction methodology was applied to complex polyatomic systems, in which complete infrared spectra of the emitting species were obtained. Systems studied included, chlorine + HBr, HI, methane, hydrogen, ethane, propane, butane, cyclopropane, and cyclohexane. Photofragmentation studies involved the production and analysis of radical species, such as methyl, CH 2 I, and CCH. Molecules studied included methylene iodide, methyl iodide, dimethyl mercury, acetone, acetylene, vinyl chloride, dichloroethylene, and fluorochloroethylene. The first infrared characterization of a highly vibrationally excited radical was shown. Reactions of methyl radicals were studied in detail, in which a new method for obtaining absolute values of the methyl radical reaction rates were obtained

Introduction;Commemorating the first self-sustaining nuclear chain reaction on 2 December 1942

Energy Technology Data Exchange (ETDEWEB)

Eklund, S [International Atomic Energy Agency, Vienna (Austria)

1962-12-02

On the occasion of the 20th anniversary of the conducting of the first self-sustaining nuclear chain reaction and following development of nuclear reactors, the article reviews the work and scientific development behind this achievement. The impact of atomic energy on economics, benefits of nuclear reactors for electricity production and the by-product - radio isotopes, used in different areas such as industry, medicine, agriculture etc. are pointed out

Nuclear fission, chain reaction and criticality

International Nuclear Information System (INIS)

Reuss, Paul

2016-01-01

Criticality is, notably for nuclear reactors, the status which separates the case of a fission chain reaction which inexorably decays, from that of a reaction which grows faster and faster until a counter-reaction occurs. If this status is an objective in nuclear reactors, it must not be reached or exceeded in any case in other types of installations in which fissile materials are handled (fabrication, transports, nuclear fuel processing). The author proposes an insight into this notion of criticality, discusses elements of neutron science which allow the multiplication factor to be assessed, analyses accidental scenarios which may happen, and presents associated experiments and computation codes

What Can Healthcare Supply Chains Learn from Consumer-Product Supply Chains?

OpenAIRE

Schwarz, Leroy B.

2008-01-01

A Framework for Thinking About Supply-Chain Management: “The IDIB Portfolio” (Information, Decision-making, Implementation, Buffer system) Describe Supply-Chains for Consumer Products Before “Wal-Mart” Describe Supply-Chains for Consumer Products After “Wal-Mart” Describe Stylized Supply Chain for Healthcare Products

Environmental Management in Product Chains

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Forman, Marianne

2009-01-01

between existing resources, norms and values and external pressures for environmental management (second section). A model for the types of corporate network relations that need to be mapped and understood in order to analyze and/or develop environmental management in a product chain (third section......The chapter aims at giving background to companies, consultants, governmental regulators, NGOs etc. for the analysis and planning of environmental management in specific product chains through: A framework for understanding environmental management in product chains as shaped by the interaction......). An overview of examples from our own research and from literature of the type and the role of environmental issues and initiatives in product chains (fourth section). A typology for characterizing corporate strategies as part of environmental management in product chains and characterizing those competencies...

Computational study of chain transfer to monomer reactions in high-temperature polymerization of alkyl acrylates.

Science.gov (United States)

Moghadam, Nazanin; Liu, Shi; Srinivasan, Sriraj; Grady, Michael C; Soroush, Masoud; Rappe, Andrew M

2013-03-28

This article presents a computational study of chain transfer to monomer (CTM) reactions in self-initiated high-temperature homopolymerization of alkyl acrylates (methyl, ethyl, and n-butyl acrylate). Several mechanisms of CTM are studied. The effects of the length of live polymer chains and the type of monoradical that initiated the live polymer chains on the energy barriers and rate constants of the involved reaction steps are investigated theoretically. All calculations are carried out using density functional theory. Three types of hybrid functionals (B3LYP, X3LYP, and M06-2X) and four basis sets (6-31G(d), 6-31G(d,p), 6-311G(d), and 6-311G(d,p)) are applied to predict the molecular geometries of the reactants, products and transition sates, and energy barriers. Transition state theory is used to estimate rate constants. The results indicate that abstraction of a hydrogen atom (by live polymer chains) from the methyl group in methyl acrylate, the methylene group in ethyl acrylate, and methylene groups in n-butyl acrylate are the most likely mechanisms of CTM. Also, the rate constants of CTM reactions calculated using M06-2X are in good agreement with those estimated from polymer sample measurements using macroscopic mechanistic models. The rate constant values do not change significantly with the length of live polymer chains. Abstraction of a hydrogen atom by a tertiary radical has a higher energy barrier than abstraction by a secondary radical, which agrees with experimental findings. The calculated and experimental NMR spectra of dead polymer chains produced by CTM reactions are comparable. This theoretical/computational study reveals that CTM occurs most likely via hydrogen abstraction by live polymer chains from the methyl group of methyl acrylate and methylene group(s) of ethyl (n-butyl) acrylate.

Thermally multiplexed polymerase chain reaction.

Science.gov (United States)

Phaneuf, Christopher R; Pak, Nikita; Saunders, D Curtis; Holst, Gregory L; Birjiniuk, Joav; Nagpal, Nikita; Culpepper, Stephen; Popler, Emily; Shane, Andi L; Jerris, Robert; Forest, Craig R

2015-07-01

Amplification of multiple unique genetic targets using the polymerase chain reaction (PCR) is commonly required in molecular biology laboratories. Such reactions are typically performed either serially or by multiplex PCR. Serial reactions are time consuming, and multiplex PCR, while powerful and widely used, can be prone to amplification bias, PCR drift, and primer-primer interactions. We present a new thermocycling method, termed thermal multiplexing, in which a single heat source is uniformly distributed and selectively modulated for independent temperature control of an array of PCR reactions. Thermal multiplexing allows amplification of multiple targets simultaneously-each reaction segregated and performed at optimal conditions. We demonstrate the method using a microfluidic system consisting of an infrared laser thermocycler, a polymer microchip featuring 1 μl, oil-encapsulated reactions, and closed-loop pulse-width modulation control. Heat transfer modeling is used to characterize thermal performance limitations of the system. We validate the model and perform two reactions simultaneously with widely varying annealing temperatures (48 °C and 68 °C), demonstrating excellent amplification. In addition, to demonstrate microfluidic infrared PCR using clinical specimens, we successfully amplified and detected both influenza A and B from human nasopharyngeal swabs. Thermal multiplexing is scalable and applicable to challenges such as pathogen detection where patients presenting non-specific symptoms need to be efficiently screened across a viral or bacterial panel.

Use of polymerase chain reaction in the diagnosis of toxocariasis: an experimental study.

Science.gov (United States)

Rai, S K; Uga, S; Wu, Z; Takahashi, Y; Matsumura, T

1997-09-01

In this paper we report the usefulness of polymerase chain reaction technique in the diagnosis of visceral larva migrans in a mouse model. Liver samples obtained from two set of experimentally infected mice (10, 100, 1,000 and 10,000 embryonated Toxocara canis eggs per mouse) along with the eggs of T. canis, T. cati and Ascaris suum were included in this study. Polymerase chain reaction (PCR) was performed using Toxocara primers (SB12). The first PCR product electrophoresis revealed very thin positive bands or no bands in liver samples. However, on second PCR a clear-cut bands were observed. No positive band was shown by A. suum eggs. Our findings thus indicate the usefulness of PCR technic in the diagnosis of visceral larva migrans (VLM) in liver biopsy materials specifically by means of double PCR using the primer SB12.

The role of chain carriers in fusion reaction kinetics

International Nuclear Information System (INIS)

Harms, A.A.; Krenciglowa, E.M.

1980-01-01

The role of chain carriers as contributors to multiplicative closed cycles in advanced fusion fuels is examined. Emphasis is placed on rate processes which can be used to characterize critical/supercritical/subcritical tendencies of arbitrary closed fusion cycles. Temporal trajectories for the chain carriers which describe both increasing and decreasing multiplicative processes have been found to exist and identified according to their fusion fuel cycle characteristics. Practical criteria to ensure the attainment of steady-state fusion reaction processes have been formulated in terms of fusion reaction rate relationships. (author)

Rapid analysis of rearranged kappa light chain genes of circulating polysaccharide-specific B lymphocytes by means of immunomagnetic beads and the polymerase chain reaction

DEFF Research Database (Denmark)

Hougs, L; Barington, T; Madsen, HO

1993-01-01

reaction (PCR) using in addition a degenerate kappa light chain signal peptide region primer. The PCR product was cloned into the M13mp18 phage. The cloning efficiency was 100-600 clones/ml of blood. Of the 86 clones sequenced, 90% represented rearranged kappa light chain genes from different antibody...... of the B lymphocytes activated in vivo. Here, we present a method for rapid analysis of the rearranged kappa light chain genes used by human circulating antigen-specific B lymphocytes. After vaccination with Haemophilus influenzae type b capsular polysaccharide (HibCP) conjugated with protein, the Hib...

Reverse transcriptase-quantitative polymerase chain reaction (RT ...

African Journals Online (AJOL)

zino

2014-02-05

Feb 5, 2014 ... ecological studies - A review ... The objective of this review is to assess the importance of RT-qPCR in soil related ... phenol extraction step with heat inactivation of the added .... Real time polymerase chain reaction (PCR).

Polymerase chain reaction versus enzyme-linked immunosorbent ...

African Journals Online (AJOL)

Polymerase chain reaction versus enzyme-linked immunosorbent assay in detection of Chlamydia trachomatis infection among gynaecological patients in southwestern Nigeria. ... Socio-demographic bio-data and gynaecological history were obtained with questionnaire; data was analyzed using SPSS version 20.0.

The use of heteroduplex analysis of polymerase chain reaction products to support the possible transmission of Legionella pneumophila from a malfunctioning automobile air conditioner.

Science.gov (United States)

Pinar, Ahmet; Ramirez, Julio A; Schindler, Laura L; Miller, Richard D; Summersgill, James T

2002-03-01

Air conditioner condensates have not been previously associated with cases of Legionnaires' disease. We report the possible transmission of Legionella pneumophila serogroup 1 from a malfunctioning automobile air conditioning system's leaking water onto the floorboard of a car driven for a long distance by the patient. Heteroduplex analysis of polymerase chain reaction products was used to help establish an epidemiologic link between the water specimen and the patient.

The application of polymerase chain reaction-denaturing gradient ...

African Journals Online (AJOL)

Jane

2011-05-23

May 23, 2011 ... dominance in microbial ecology if the corresponding environment samples had been provided. This ... yeast peptone dextrose; PCR, polymerase chain reaction. method, DGGE method ..... Two nuclear mutations that block.

Chain reaction

International Nuclear Information System (INIS)

Balogh, Brian.

1991-01-01

Chain Reaction is a work of recent American political history. It seeks to explain how and why America came to depend so heavily on its experts after World War II, how those experts translated that authority into political clout, and why that authority and political discretion declined in the 1970s. The author's research into the internal memoranda of the Atomic Energy Commission substantiates his argument in historical detail. It was not the ravages of American anti-intellectualism, as so many scholars have argued, that brought the experts back down to earth. Rather, their decline can be traced to the very roots of their success after World War II. The need to over-state anticipated results in order to garner public support, incessant professional and bureaucratic specialization, and the sheer proliferation of expertise pushed arcane and insulated debates between experts into public forums at the same time that a broad cross section of political participants found it easier to gain access to their own expertise. These tendencies ultimately undermined the political influence of all experts. (author)

Electrochemiluminescence polymerase chain reaction detection of genetically modified organisms

International Nuclear Information System (INIS)

Liu Jinfeng; Xing Da; Shen Xingyan; Zhu Debin

2005-01-01

With the development of biotechnology, more and more genetically modified organisms (GMOs) have entered commercial market. Because of the safety concerns, detection and characterization of GMOs have attracted much attention recently. Electrochemiluminescence (ECL) method is a chemiluminescent (CL) reaction of species generated electrochemically on an electrode surface. It is a highly efficient and accurate detection method. In this paper, ECL polymerase chain reaction (PCR) combined with two types of nucleic acid probes hybridization was applied to detect GMOs for the first time. Whether the organisms contain GM components was discriminated by detecting the cauliflower mosaic virus 35S (CaMV35S) promoter and nopaline synthase (NOS) terminator. The experiment results show that the detection limit is 100 fmol of PCR products. The promoter and the terminator can be clearly detected in GMOs. The method may provide a new means for the detection of GMOs due to its simplicity and high efficiency

Absolute rate constants for the reaction of hypochlorous acid with protein side chains and peptide bonds

DEFF Research Database (Denmark)

Pattison, D I; Davies, Michael Jonathan

2001-01-01

, absolute second-order rate constants for the reactions of HOCl with protein side chains, model compounds, and backbone amide (peptide) bonds have been determined at physiological pH values. The reactivity of HOCl with potential reactive sites in proteins is summarized by the series: Met (3.8 x 10(7) M(-1......Hypochlorous acid (HOCl) is a potent oxidant, which is produced in vivo by activated phagocytes. This compound is an important antibacterial agent, but excessive or misplaced production has been implicated in a number of human diseases, including atherosclerosis, arthritis, and some cancers....... Proteins are major targets for this oxidant, and such reaction results in side-chain modification, backbone fragmentation, and cross-linking. Despite a wealth of qualitative data for such reactions, little absolute kinetic data is available to rationalize the in vitro and in vivo data. In this study...

Evaluation of the LTQ-Orbitrap mass spectrometer for the analysis of polymerase chain reaction products.

Science.gov (United States)

Manduzio, Hélène; Ezan, Eric; Fenaille, François

2010-12-30

We have investigated the potential and robustness of the off-line coupling of polymerase chain reaction (PCR) with electrospray ionization mass spectrometry (ESI-MS), for further applications in the screening of single-nucleotide polymorphisms (SNPs). This was based on recently reported data demonstrating that anion-exchange solid-phase extraction was the most efficient technique for efficiently desalting PCR products, with a recovery of ∼70%. Results showed that this purification approach efficiently removes almost all the chemicals commonly added to PCR buffers. ESI-MS analysis of a model 114-bp PCR product performed on the LTQ-Orbitrap instrument demonstrated that detection limits in the nM range along with an average mass measurement uncertainty of 9.15 ± 7.11 ppm can be routinely obtained using an external calibration. The PCR/ESI-MS platform was able to detect just a few copies of a targeted oligonucleotide. However, it was shown that if two PCR products are present in a mixture in a ratio higher than 10 to 1, the lower abundance one might not be reproducibly detected. Applications to SNPs demonstrated that an LTQ-Orbitrap with a resolution of 30 000 (at m/z 400) easily identified a single (A ↔ G) switch, i.e. a 16 Da difference, in binary mixtures of ∼ 35 kDa PCR products. Complementary experiments also showed that the combination of endonucleases and ESI-MS could be used to confirm base composition and sequence, and thus to screen for unknown polymorphisms in specific sequences. For example, a single (T ↔ A) switch (9 Da mass difference) was successfully identified in a 114-bp PCR product. Copyright © 2010 John Wiley & Sons, Ltd.

MEANS FOR PRODUCING PLUTONIUM CHAIN REACTIONS

Science.gov (United States)

Wigner, E.P.; Weinberg, A.M.

1961-01-24

A neutronic reactor is described with an active portion capable of operating at an energy level of 0.5 to 1000 ev comprising discrete bodies of Pu/ sup 239/ disposed in a body of water which contains not more than 5 molecules of water to one atom of plutonium, the total amount of Pu/sup 239/ being sufficient to sustain a chain reaction. (auth)

Identifikasi Cendawan Endofit Menggunakan Teknik Polymerase Chain Reaction (Detection of Endophytic Fungi Using Polymerase Chain Reaction Technique

Directory of Open Access Journals (Sweden)

Tuti Susanti Legiastuti

2013-04-01

Full Text Available Yellow leaf curl disease, caused by a member of Begomovirus (Geminiviridae, is one of important diseases of chilli pepper in Indonesia. Exploration of endophytic fungi was initiated in order to find biological control agents for an alternative control strategies of this disease. Isolates of endophytic fungi were collected from chilli pepper growing area in Sleman, Yogyakarta and further identification using molecular technique involving polymerase chain reaction (PCR and DNA sequencing was performed. DNA fragments of ±500 bp were successfully amplified from 10 fungal isolates by PCR using primer pair ITS1/ITS4, but only 8 DNA sequences was obtained for further genetic analysis. Based on BLASTN analysis the endophytic fungi were identified as having the highest similarity with Pleosporaceae sp. (98% for H1 isolate, Cercospora nicotianae (100% for H5 isolate, ercospora piaropi (98% for H11 isolate, Guignardia mangiferae (99% for H16 isolate, Geomyces pannorum 95% for H17 isolate, Diaporthe phaseoloru (99% for H18 isolate, Dothideomycete sp. (100% for K3 isolate, and Alternaria longissima (99% for K10 isolate. Key words: Begomovirus, chillipepper, DNA sequencing, polymerase chain reaction

Rapid establishment of polymerase chain reaction-restriction ...

African Journals Online (AJOL)

2012-03-30

Mar 30, 2012 ... genome using polymerase chain reaction (PCR) has made it possible to explore organelle DNA diversity for taxonomic and phylogenetic purposes. Because of its uniparental mode of inheritance and its low mutation rate related to the nuclear genome, chloroplast DNA (cpDNA) is considered to be an ideal ...

Comparison of polymerase chain reaction (PCR) and loop-mediated ...

African Journals Online (AJOL)

Comparison of polymerase chain reaction (PCR) and loop-mediated isothermal amplification (LAMP) for diagnosis of Fusarium solani in human immunodeficiency virus (HIV) positive patients. ... The test was carried out in 1 h reaction at 65°C in a heater block. The specificity of the test was 100% and its sensitivity was a ...

Determining Annealing Temperatures for Polymerase Chain Reaction

Science.gov (United States)

Porta, Angela R.; Enners, Edward

2012-01-01

The polymerase chain reaction (PCR) is a common technique used in high school and undergraduate science teaching. Students often do not fully comprehend the underlying principles of the technique and how optimization of the protocol affects the outcome and analysis. In this molecular biology laboratory, students learn the steps of PCR with an…

Rapid genetically modified organism (GMO screening of various food products and animal feeds using multiplex polymerase chain reaction (PCR

Directory of Open Access Journals (Sweden)

Lisha, V.

2017-01-01

Full Text Available modified crops which brought up a controversy on the safety usage of genetically modified organisms (GMOs. It has been implemented globally that all GMO products and its derived ingredients should have regulations on the usage and labelling. Thus, it is necessary to develop methods that allow rapid screening of GMO products to comply with the regulations. This study employed a reliable and flexible multiplex polymerase chain reaction (PCR method for the rapid detection of transgenic elements in genetically modified soy and maize along with the soybean LECTIN gene and maize ZEIN gene respectively. The selected four common transgenic elements were 35S promoter (35S; Agrobacterium tumefaciens nopaline synthase terminator (NOS; 5-enolypyruvylshikimate-3-phosphate synthase (epsps gene; and Cry1Ab delta-endotoxin (cry1Ab gene. Optimization of the multiplex PCR methods were carried out by using 1% Roundup ReadyTM Soybean (RRS as the certified reference material for soybean that produced fourplex PCR method detecting 35S promoter, NOS terminator, epsps gene and soybean LECTIN gene and by using 1% MON810 as the certified reference material for maize that produced triplex PCR method detecting 35S promoter, cry1Ab gene and maize ZEIN gene prior to screening of the GMO traits in various food products and animal feeds. 1/9 (11.1% of the animal feed contained maize and 1/15 (6.7% of the soybean food products showed positive results for the detection of GMO transgenic gene. None of the maize food products showed positive results for GMO transgenic gene. In total, approximately 4% of the food products and animal feed were positive as GMO. This indicated GMOs have not widely entered the food chain. However, it is necessary to have an appropriate screening method due to GMOs’ unknown potential risk to humans and to animals. This rapid screening method will provide leverage in terms of being economically wise, time saving and reliable.

Investigating radical cation chain processes in the electrocatalytic Diels-Alder reaction.

Science.gov (United States)

Imada, Yasushi; Okada, Yohei; Chiba, Kazuhiro

2018-01-01

Single electron transfer (SET)-triggered radical ion-based reactions have proven to be powerful options in synthetic organic chemistry. Although unique chain processes have been proposed in various photo- and electrochemical radical ion-based transformations, the turnover number, also referred to as catalytic efficiency, remains unclear in most cases. Herein, we disclose our investigations of radical cation chain processes in the electrocatalytic Diels-Alder reaction, leading to a scalable synthesis. A gram-scale synthesis was achieved with high current efficiency of up to 8000%. The reaction monitoring profiles showed sigmoidal curves with induction periods, suggesting the involvement of intermediate(s) in the rate determining step.

Bordetella pertussis diagnosed by polymerase chain reaction

DEFF Research Database (Denmark)

Birkebaek, N H; Heron, I; Skjødt, K

1994-01-01

The object of this work was to test the polymerase chain reaction (PCR) for demonstration of Bordetella pertussis (BP) in nasopharyngeal secretions. The method was applied to patients with recently diagnosed pertussis, as verified by BP culture. In order to test the sensitivity and specificity...... in 25 patients in whose nasopharyngeal secretions BP had been demonstrated after 4-7 days of culture. The detection limit of PCR in aqueous solution was 1-2 BP bacteria per reaction tube. PCR was 100% specific for BP, showing no response with other Bordetella species or other bacteria known to colonize...

Polymerase chain reaction: basic protocol plus troubleshooting and optimization strategies.

Science.gov (United States)

Lorenz, Todd C

2012-05-22

In the biological sciences there have been technological advances that catapult the discipline into golden ages of discovery. For example, the field of microbiology was transformed with the advent of Anton van Leeuwenhoek's microscope, which allowed scientists to visualize prokaryotes for the first time. The development of the polymerase chain reaction (PCR) is one of those innovations that changed the course of molecular science with its impact spanning countless subdisciplines in biology. The theoretical process was outlined by Keppe and coworkers in 1971; however, it was another 14 years until the complete PCR procedure was described and experimentally applied by Kary Mullis while at Cetus Corporation in 1985. Automation and refinement of this technique progressed with the introduction of a thermal stable DNA polymerase from the bacterium Thermus aquaticus, consequently the name Taq DNA polymerase. PCR is a powerful amplification technique that can generate an ample supply of a specific segment of DNA (i.e., an amplicon) from only a small amount of starting material (i.e., DNA template or target sequence). While straightforward and generally trouble-free, there are pitfalls that complicate the reaction producing spurious results. When PCR fails it can lead to many non-specific DNA products of varying sizes that appear as a ladder or smear of bands on agarose gels. Sometimes no products form at all. Another potential problem occurs when mutations are unintentionally introduced in the amplicons, resulting in a heterogeneous population of PCR products. PCR failures can become frustrating unless patience and careful troubleshooting are employed to sort out and solve the problem(s). This protocol outlines the basic principles of PCR, provides a methodology that will result in amplification of most target sequences, and presents strategies for optimizing a reaction. By following this PCR guide, students should be able to: • Set up reactions and thermal cycling

Influence of transesterification reaction temperature on biodiesel production

Energy Technology Data Exchange (ETDEWEB)

Pighinelli, Anna Leticia Montenegro Turtelli; Zorzeto, Thais Queiroz; Park, Kil Jin [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola], E-mail: annalets@agr.unicamp.br; Bevilaqua, Gabriela [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Inst. de Quimica

2008-07-01

Brazilian government policy has authorized the introduction of biodiesel into the national energy matrix, law no.11.097 of January 13th, 2005. It is necessary, like any new product, to invest in research which is able to cover its entire production chain (planting of oilseeds, vegetable oils extraction and chemical reactions), providing data and relevant information in order to optimize the process and solve critical issues. The objective of this work was to study the effects of temperature on crude sunflower transesterification reaction with ethanol. A central composite experimental design with five variation levels (25 deg, 32 deg, 47.5 deg, 64 deg and 70 deg C) was used and response surface methodology applied for the data analysis. The statistical analysis of the results showed that the production suffered the influence of temperature (linear and quadratic effects) and reaction time (linear and quadratic). The generated models did not show significant regression. The model generated was not well suited to the experimental data and the value of the coefficient of determination (R{sup 2}=0.52) was low. Consequently it was not possible to build the response surface. (author)

Supply chains in global production

Directory of Open Access Journals (Sweden)

Anatolii Mazaraki

2017-10-01

Full Text Available Introduction. Analyzing the current processes of global sales and sales interaction over the past two decades shows that the world’s system of exchanges has undergone significant changes that have been caused by a multitude of factors. The formation of a complex model of global production, determined by the peculiarities of the transformation of individual economies’ growth models, the specifics of their industrialization and the forms of development of their national production business, its institutional and market-wise restructuring and the degree of inclusion in the system of international division of labor. The change in the level and depth of the specialization of individual countries in the field of production and sale of products, in turn, has accelerated the overcoming of economic distance (which is measured by the cost of transport and information services. Based on the above, namely, within the framework of forming a new model of global production, the issue of studying the role and value of supply chains in this model is made relevant. Aim and tasks. The purpose of the article is to study the modern transformation of supply chains within the global production system. The findings will allow to determine what exactly needs to be done in the direction of further redeveloping the regulatory tools of global supply chain management. Research results. The article presents the results of studying the transformation of supply chains’ role in global production. It is determined that taking into account the existing specificity of industrialization and fragmentation of national production, as well as the rapid spread of the results of scientific and technological progress in the world economy, there is a need for a more thorough study of this change. As a result of analyzing open source statistical data, a conclusion was reached regarding the transition from the competition of individual business entities to the competition of global

Performance evaluation on aquatic product cold-chain logistics

Directory of Open Access Journals (Sweden)

Wenbing Wu

2015-11-01

Full Text Available Purpose: The requirements for high quality and diversification aquatic products are increasing with the improvement of Chinese living standard. However, the distribution between place of production and place of consumption are uneven, which results in large cold-chain logistics demand for aquatic products. At present, the low-level development of cold chain logistics has a bad impact on the circulation of aquatic products in China. So it is very urgent to develop cold-chain logistics in China. Design/methodology/approach: In order to do this, we apply performance evaluation, a well-known management tool, to study Chinese aquatic product cold-chain logistics. In this paper we first propose SISP(Subjects, Indexes, Standards, and Phases of performance evaluation model and ACSSN model(Aquatic product, Customer, Supply Chain, Society, and Node enterprises of supply chain for aquatic products cold-chain logistics performance evaluation. Then an ANP-Fuzzy method is proposed to evaluate the operational performance of Shandong Oriental Ocean Sci-Tech Co., Ltd. Furthermore, a system dynamic model is built to simulate the impact of temperature on the profits in aquatic products cold-chain sales section. Findings: We find out within a reasonable temperature range, lower temperature brings higher profit level. Also, performance improvement methods are proposed and the simulation of performance evaluation system is developed. Practical implications: Our findings can help to improve the level of aquatic product cold-chain logistics in China. Originality/value: The paper proposes the SISP (Subjects, Indexes, Standards, and Phases of performance evaluation model and ACSSN model (Aquatic product, Customer, Supply Chain, Society, and Node enterprises of supply chain for aquatic products cold-chain logistics performance evaluation.

Competing irreversible cooperative reactions on polymer chains

International Nuclear Information System (INIS)

Evans, J.W.; Hoffman, D.K.; Burgess, D.R.

1984-01-01

We analyze model processes involving competition between several irreversible reactions at the sites of a 1D, infinite, uniform polymer chain. These reactions can be cooperative, i.e., the corresponding rates depend on the state of the surrounding sites. An infinite hierarchy of rate equations is readily derived for the probabilities of various subconfigurations. By exploiting a shielding property of suitable blocks of unreacted sites, we show how exact hierarchy truncation and solution is sometimes possible. The behavior of solutions is illustrated in several cases by plotting families of ''reaction trajectories'' for varying ratios of reactant concentrations. As a specific application, we consider competition between coordination of ZnCl 2 to pairs of oxygen atoms and to single oxygen atoms in poly(propylene oxide). The observed glass transition temperature behavior is eludicated

9 CFR 147.30 - Laboratory procedure recommended for the polymerase chain reaction (PCR) test for Mycoplasma...

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Laboratory procedure recommended for... Examination Procedures § 147.30 Laboratory procedure recommended for the polymerase chain reaction (PCR) test... tracheal swabs in PBS or 1 mL of broth culture by a non-phenolic procedure. Centrifuge samples at 14,000 x...

The ligase chain reaction as a primary screening tool for the detection of culture positive tuberculosis.

LENUS (Irish Health Repository)

O'Connor, T M

2012-02-03

BACKGROUND: The ligase chain reaction Mycobacterium tuberculosis assay uses ligase chain reaction technology to detect tuberculous DNA sequences in clinical specimens. A study was undertaken to determine its sensitivity and specificity as a primary screening tool for the detection of culture positive tuberculosis. METHODS: The study was conducted on 2420 clinical specimens (sputum, bronchoalveolar lavage fluid, pleural fluid, urine) submitted for primary screening for Mycobacterium tuberculosis to a regional medical microbiology laboratory. Specimens were tested in parallel with smear, ligase chain reaction, and culture. RESULTS: Thirty nine patients had specimens testing positive by the ligase chain reaction assay. Thirty two patients had newly diagnosed tuberculosis, one had a tuberculosis relapse, three had tuberculosis (on antituberculous therapy when tested), and three had healed tuberculosis. In the newly diagnosed group specimens were smear positive in 21 cases (66%), ligase chain reaction positive in 30 cases (94%), and culture positive in 32 cases (100%). Using a positive culture to diagnose active tuberculosis, the ligase chain reaction assay had a sensitivity of 93.9%, a specificity of 99.8%, a positive predictive value of 83.8%, and a negative predictive value of 99.9%. CONCLUSIONS: This study is the largest clinical trial to date to report the efficacy of the ligase chain reaction as a primary screening tool to detect Mycobacterium tuberculosis infection. The authors conclude that ligase chain reaction is a useful primary screening test for tuberculosis, offering speed and discrimination in the early stages of diagnosis and complementing traditional smear and culture techniques.

9 CFR 147.31 - Laboratory procedures recommended for the real-time polymerase chain reaction test for Mycoplasma...

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Laboratory procedures recommended for... Examination Procedures § 147.31 Laboratory procedures recommended for the real-time polymerase chain reaction.... Following incubation, 100 µl of 100 percent ethanol is added to lysate. Wash and centrifuge following...

Integrating product design into the supply chain

DEFF Research Database (Denmark)

Khan, Omera; Stolte, Terje; Creazza, Alessandro

2016-01-01

into the supply chain. Originality/Value: This paper provides novel insights to both practitioners and researchers. For practitioners detailed recommendations are given on how they can maximise benefits through integrating product design into the supply chain. The RBV has been harnessed to highlight how......Purpose: The aim of the research is to illustrate how companies can create competitive capabilities through integration of product design into the supply chain. In doing so the paper reveals the challenges and the opportunities that companies face when integrating product design and supply chain...... of opportunities and challenges when integrating product design and the supply chain and subsequently a step-by-step guide is developed to address these. Practical Implications: The research provides key recommendations to companies on how to create competitive capabilities by integrating product design...

Integrating product design into the supply chain

DEFF Research Database (Denmark)

Khan, Omera; Stolte, Terje; Creazza, Alessandro

2016-01-01

Purpose: The aim of the research is to illustrate how companies can create competitive capabilities through integration of product design into the supply chain. In doing so the paper reveals the challenges and the opportunities that companies face when integrating product design and supply chain...... of opportunities and challenges when integrating product design and the supply chain and subsequently a step-by-step guide is developed to address these. Practical Implications: The research provides key recommendations to companies on how to create competitive capabilities by integrating product design...... into the supply chain. Originality/Value: This paper provides novel insights to both practitioners and researchers. For practitioners detailed recommendations are given on how they can maximise benefits through integrating product design into the supply chain. The RBV has been harnessed to highlight how...

Environmental management in product chains

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Forman, Marianne; Hansen, Anne Grethe

of environmental initiatives, a number of recommendations for governmental regulation, which can support the further diffusion of environmental management in product chains, are developed. Furthermore, the report describes a number of theoretical perspectives from sociology of technology, organisation theory......This report presents the analyses of the shaping, implementation and embedding of eight types of environmental initiatives in product chains. The analyses focus on • the role of the type of product and branch, of the size of the companies and of governmental regulation • the focus...... of the environmental concerns and the reductions in environmental impact • organisational changes which have been part of the embedding of the initiatives The analyses are based on 25 cases from national and international product chains involving one or more Danish companies. Based on the analyses of the eight types...

Coordinated supply chain dynamic production planning model

Science.gov (United States)

Chandra, Charu; Grabis, Janis

2001-10-01

Coordination of different and often contradicting interests of individual supply chain members is one of the important issues in supply chain management because the individual members can not succeed without success of the supply chain and vice versa. This paper investigates a supply chain dynamic production planning problem with emphasis on coordination. A planning problem is formally described using a supply chain kernel, which defines supply chain configuration, management policies, available resources and objectives both at supply chain or macro and supply chain member or micro levels. The coordinated model is solved in order to balance decisions made at the macro and micro levels and members' profitability is used as the coordination criterion. The coordinated model is used to determine inventory levels and production capacity across the supply chain. Application of the coordinated model distributes costs burden uniformly among supply chain members and preserves overall efficiency of the supply chain. Influence of the demand series uncertainty is investigated. The production planning model is a part of the integrated supply chain decision modeling system, which is shared among the supply chain members across the Internet.

Theory and applications of the polymerase chain reaction.

Science.gov (United States)

Remick, D G; Kunkel, S L; Holbrook, E A; Hanson, C A

1990-04-01

The polymerase chain reaction (PCR) is a newly developed molecular biology technique that can significantly amplify DNA or RNA. The process consists of repetitive cycles of specific DNA synthesis, defined by short stretches of preselected DNA. With each cycle, there is a doubling of the final, desired DNA product such that a million-fold amplification is possible. This powerful method has numerous applications in diagnostic pathology, especially in the fields of microbiology, forensic science, and hematology. The PCR may be used to directly detect viral DNA, which may facilitate the diagnosis of acquired immune deficiency syndrome (AIDS) or other viral diseases. PCR amplification of DNA allows detection of specific sequences from extremely small samples, such as with forensic material. In hematology, PCR may help in the diagnosis of hemoglobinopathies or of neoplastic disorders by documenting chromosomal translocations. The new PCR opens exciting new avenues for diagnostic pathology using this new technology.

Exploring the e-Supply Chain of Information Products

OpenAIRE

Raafat George Saadé

2012-01-01

Digital information product producers have not taken advantage of the e-supply chain paradigm of today. However, in this information-based sector, a different set of supply chain management challenges exist. Very little research has been done in the supply chain of information products. This study focuses on the process analysis of the supply chain paradigm for digital information products. A framework for digital information products production in e-learning is proposed followed by an exampl...

Hybridization chain reaction: a versatile molecular tool for biosensing, bioimaging, and biomedicine.

Science.gov (United States)

Bi, Sai; Yue, Shuzhen; Zhang, Shusheng

2017-07-17

Developing powerful, simple and low-cost DNA amplification techniques is of great significance to bioanalysis and biomedical research. Thus far, many signal amplification strategies have been developed, such as polymerase chain reaction (PCR), rolling circle amplification (RCA), and DNA strand displacement amplification (SDA). In particular, hybridization chain reaction (HCR), a type of toehold-mediated strand displacement (TMSD) reaction, has attracted great interest because of its enzyme-free nature, isothermal conditions, simple protocols, and excellent amplification efficiency. In a typical HCR, an analyte initiates the cross-opening of two DNA hairpins, yielding nicked double helices that are analogous to alternating copolymers. As an efficient amplification platform, HCR has been utilized for the sensitive detection of a wide variety of analytes, including nucleic acids, proteins, small molecules, and cells. In recent years, more complicated sets of monomers have been designed to develop nonlinear HCR, such as branched HCR and even dendritic systems, achieving quadratic and exponential growth mechanisms. In addition, HCR has attracted enormous attention in the fields of bioimaging and biomedicine, including applications in fluorescence in situ hybridization (FISH) imaging, live cell imaging, and targeted drug delivery. In this review, we introduce the fundamentals of HCR and examine the visualization and analysis techniques for HCR products in detail. The most recent HCR developments in biosensing, bioimaging, and biomedicine are subsequently discussed with selected examples. Finally, the review provides insight into the challenges and future perspectives of HCR.

Production of lactic acid from C6-polyols by alkaline hydrothermal reactions

International Nuclear Information System (INIS)

Zhou Huazhen; Jin Fangming; Wu Bing; Cao Jianglin; Duan Xiaokun; Kishita, Atsushi

2010-01-01

Production of lactic acid from C6-polyols (Mannitol) under alkaline hydrothermal conditions was investigated. Experiments were performed to examine the difference in the production of lactic acid between C6-polyols and C3-polyols (glycerine), as well as C6-aldoses (glucose). Results showed that the yield of lactic acid from C6-polyols was lower than that from both glycerine and glucose. It indicated that long chain polyols might follow a different reaction pathway from that of glycerine. Further investigation is needed to clarify the reaction mechanism and improve the relatively low lactic acid acid yield from C6-polyols.

Environmental Management Initiatives in Product Chains

DEFF Research Database (Denmark)

Forman, Marianne; Hansen, Anne Grethe; Jørgensen, Michael Søgaard

The Environmental Council for Cleaner Products in 2000-2001 initiated a collection of experience from the environmental co-operation in 25 product chains. This collection of experience was to elucidate the concrete co-operation between suppliers, enterprises and purchasers, to go through tools...... and to report on opportunities and barriers for environmental efforts in the entire product chain. This paper aims at giving a comprehensive analysis of the experiences, on the basis of the reporting of the 25 companies and their supply chains (reported by Ettrup and Bauer in 2002. The 25 case studies have been...

A Double Polymerase Chain Reaction Method for Detecting African ...

African Journals Online (AJOL)

Keywords: African swine fever, Swine vesicular disease, Polymerase chain reaction, Recombinant plasmids ... included 5 μL of 10×Pfu DNA polymerase buffer,. 1 μL of Pfu DNA .... Garcia-Barreno B, Sanz A, Nogal ML, Vinuela E,. Enjuanes L.

Prevalence of Listeria monocytogenes, Yersinia enterocolitica, Staphylococcus aureus, and Salmonella enterica Typhimurium in meat and meat products using multiplex polymerase chain reaction

Directory of Open Access Journals (Sweden)

C. Latha

2017-08-01

Full Text Available Aim: The objective of the study was to investigate the occurrence of Listeria monocytogenes, Yersinia enterocolitica, Staphylococcus aureus, and Salmonella enterica Typhimurium in meat and meat products using the multiplex polymerase chain reaction (PCR method. Materials and Methods: The assay combined an enrichment step in tryptic soy broth with yeast extract formulated for the simultaneous growth of target pathogens, DNA isolation and multiplex PCR. A total of 1134 samples including beef (n=349, chicken (n=325, pork (n=310, chevon (n=50, and meat products (n=100 were collected from different parts of Kerala, India. All the samples were subjected to multiplex PCR analysis and culture-based detection for the four pathogens in parallel. Results: Overall occurrence of L. monocytogenes was 0.08 % by cultural method. However, no L. monocytogenes was obtained by multiplex PCR method. Yersinia enterocolitica was obtained from beef and pork samples. A high prevalence of S. aureus (46.7% was found in all types of meat samples tested. None of the samples was positive for S. Typhimurium. Conclusion: Multiplex PCR assay used in this study can detect more than one pathogen simultaneously by amplifying more than one target gene in a single reaction, which can save time and labor cost.

One-step production of long-chain hydrocarbons from waste-biomass-derived chemicals using bi-functional heterogeneous catalysts.

Science.gov (United States)

Wen, Cun; Barrow, Elizabeth; Hattrick-Simpers, Jason; Lauterbach, Jochen

2014-02-21

In this study, we demonstrate the production of long-chain hydrocarbons (C8+) from 2-methylfuran (2MF) and butanal in a single step reactive process by utilizing a bi-functional catalyst with both acid and metallic sites. Our approach utilizes a solid acid for the hydroalkylation function and as a support as well as a transition metal as hydrodeoxygenation catalyst. A series of solid acids was screened, among which MCM-41 demonstrated the best combination of activity and stability. Platinum nanoparticles were then incorporated into the MCM-41. The Pt/MCM-41 catalyst showed 96% yield for C8+ hydrocarbons and the catalytic performance was stable over four reaction cycles of 20 hour each. The reaction pathways for the production of long-chain hydrocarbons is probed with a combination of infrared spectroscopy and steady-state reaction experiments. It is proposed that 2MF and butanal go through hydroalkylation first on the acid site followed by hydrodeoxygenation to produce the hydrocarbon fuels.

Photoluminescence and self-assembly of cesium lead halide perovskite nanocrystals: Effects of chain length of organic amines and reaction temperature

International Nuclear Information System (INIS)

Yuan, Yi; Liu, Zheming; Liu, Zhenyang; Peng, Lan; Li, Yongjie; Tang, Aiwei

2017-01-01

Highlights: • CsPbBr_3 perovskite nanocrystals have been synthesized in the presence of organic amines with different hydrocarbon length. • The photoluminescence of the CsPbBr_3 nanocrystals is affected by the varying the carbon length of the organic amines. • The lower reaction temperature and hydrocarbon chain length of the organic ligands play a significant role in the self-assembly of CsPbBr_3 nanocrystals. - Abstract: All-inorganic halide perovskites have become one of the most prospective materials for lightening and display technology due to their color-tunable and narrow-band emission. Herein, we have systematically studied the effects of organic amines with different hydrocarbon chain length on the optical properties and morphology as well as the crystal structure of colloidal CsPbBr_3 nanocrystals (NCs), which were synthesized in the presence of oleic acid (OA) and organic amines by using a simple hot-injection approach. The hydrocarbon chain length has shown an independent correlation to the morphology and crystal structure of the as-obtained CsPbBr_3 NCs at 160 °C, but their optical properties can be affected to some extent. The photoluminescence quantum yields (PLQYs) of the CsPbBr_3 NCs synthesized in the presence of organic amines with long carbon chain length are generally in the range of 55–80% for different reaction time, but the PLQYs of less than 20% are obtained for the products synthesized in the presence of octylamine (OTAm) with short carbon chain length. The effects of the reaction temperature on the optical properties, size and crystal structure of the CsPbBr_3 NCs synthesized in the presence of cetylamine (CTAm) are studied. Interestingly, some nanoplates also appear in these CsPbBr_3 NCs obtained at relatively low temperatures (120 and 140 °C), which have a strong tendency to self-assemble into face-to-face nanostructures. Such a similar self-assembly behavior is also observed in the product synthesized in the presence of

Photoluminescence and self-assembly of cesium lead halide perovskite nanocrystals: Effects of chain length of organic amines and reaction temperature

Energy Technology Data Exchange (ETDEWEB)

Yuan, Yi; Liu, Zheming; Liu, Zhenyang; Peng, Lan; Li, Yongjie; Tang, Aiwei, E-mail: awtang@bjtu.edu.cn

2017-05-31

Highlights: • CsPbBr{sub 3} perovskite nanocrystals have been synthesized in the presence of organic amines with different hydrocarbon length. • The photoluminescence of the CsPbBr{sub 3} nanocrystals is affected by the varying the carbon length of the organic amines. • The lower reaction temperature and hydrocarbon chain length of the organic ligands play a significant role in the self-assembly of CsPbBr{sub 3} nanocrystals. - Abstract: All-inorganic halide perovskites have become one of the most prospective materials for lightening and display technology due to their color-tunable and narrow-band emission. Herein, we have systematically studied the effects of organic amines with different hydrocarbon chain length on the optical properties and morphology as well as the crystal structure of colloidal CsPbBr{sub 3} nanocrystals (NCs), which were synthesized in the presence of oleic acid (OA) and organic amines by using a simple hot-injection approach. The hydrocarbon chain length has shown an independent correlation to the morphology and crystal structure of the as-obtained CsPbBr{sub 3} NCs at 160 °C, but their optical properties can be affected to some extent. The photoluminescence quantum yields (PLQYs) of the CsPbBr{sub 3} NCs synthesized in the presence of organic amines with long carbon chain length are generally in the range of 55–80% for different reaction time, but the PLQYs of less than 20% are obtained for the products synthesized in the presence of octylamine (OTAm) with short carbon chain length. The effects of the reaction temperature on the optical properties, size and crystal structure of the CsPbBr{sub 3} NCs synthesized in the presence of cetylamine (CTAm) are studied. Interestingly, some nanoplates also appear in these CsPbBr{sub 3} NCs obtained at relatively low temperatures (120 and 140 °C), which have a strong tendency to self-assemble into face-to-face nanostructures. Such a similar self-assembly behavior is also observed in the

Polymerase chain reaction-mediated DNA fingerprinting for epidemiological studies on Campylobacter spp

NARCIS (Netherlands)

Giesendorf, B A; Goossens, H; Niesters, H G; Van Belkum, A; Koeken, A; Endtz, H P; Stegeman, H; Quint, W G

The applicability of polymerase chain reaction (PCR)-mediated DNA typing, with primers complementary to dispersed repetitive DNA sequences and arbitrarily chosen DNA motifs, to study the epidemiology of campylobacter infection was evaluated. With a single PCR reaction and simple gel electrophoresis,

The Ripple Effect: Citation Chain Reactions of a Nobel Prize

DEFF Research Database (Denmark)

Faber Frandsen, Tove; Nicolaisen, Jeppe

2013-01-01

This paper explores the possible citation chain reactions of a Nobel Prize using the mathematician Robert J. Aumann as a case example. The results show that the award of the Nobel Prize in 2005 affected not only the citations to his work, but also affected the citations to the references in his s...... citation network. The effect is discussed using innovation decision process theory as a point of departure to identify the factors that created a bandwagon effect leading to the reported observations....... scientific oeuvre. The results indicate that the spillover effect is almost as powerful as the effect itself. We are consequently able to document a ripple effect in which the awarding of the Nobel Prize ignites a citation chain reaction to Aumann's scientific ouvre and to the references in its nearest...

The shaping of environmental concern in product chains: analysing Danish case studies on environmental aspects in product chain relations

DEFF Research Database (Denmark)

Forman, Marianne; Hansen, Anne Grethe; Jørgensen, Michael Søgaard

indirect demand for greening activities. The analysis shows the co-construction of environmental concerns and demands, companies’ environmental practices and technological developments, and their stabilisation in the supply chain. The case studies also point to how the greening of frontrunners might make...... the systems of production, consumption, knowledge and regulation are discussed. The role of boundary objects is discussed with eco-labelling as case. The role of and the impact on the product chain relations are analysed as part of these mechanisms. From the case studies, green innovations in the product...... chain, which the case company represents, are identified. Direct customer and regulatory demands, as well as indirect societal and regulatory demands are mapped, and their role for product chain greening analysed. The case studies point to the importance of customer demand, regulation and potentially...

Prevalence of Listeria monocytogenes, Vibrio parahaemolyticus, Staphylococcus aureus, and Salmonella spp. in seafood products using multiplex polymerase chain reaction.

Science.gov (United States)

Zarei, Mehdi; Maktabi, Siavash; Ghorbanpour, Masoud

2012-02-01

Although several etiological agents can be transmitted through seafood consumption, Listeria monocytogenes, Vibrio parahaemolyticus, Staphylococcus aureus, and Salmonella spp. are considered among the most important pathogens in terms of public health and disease. In this study, multiplex polymerase chain reaction (PCR), as a rapid and cost-effective method, was used to determine the prevalence of these pathogens in 245 samples of raw/fresh, frozen, and ready-to-eat (RTE) seafood products marketed in Iran. The prevalence of L. monocytogenes in raw/fresh fish and shrimp samples was 1.4%, whereas 2.9% of the raw/fresh fish and 7.1% of the shrimp samples were contaminated with V. parahaemolyticus. No contamination with L. monocytogenes and V. parahaemolyticus was found in frozen and RTE seafood products. The prevalence of S. aureus was found to be higher than other investigated pathogens. S. aureus was detected in 5% of the raw/fresh samples of fish and shrimp, 17.5% of the frozen, and 12.3% of the RTE samples. Further, our findings indicate that 2.9% of the fish samples, 4.3% of the shrimp samples, and 1.5% of the RTE samples were contaminated with Salmonella spp. Owing to the potential hazard of these pathogenic bacteria, multiplex PCR can provide a rapid and cost-effective method for the surveillance of these pathogens in seafood products.

Photoluminescence and self-assembly of cesium lead halide perovskite nanocrystals: Effects of chain length of organic amines and reaction temperature

Science.gov (United States)

Yuan, Yi; Liu, Zheming; Liu, Zhenyang; Peng, Lan; Li, Yongjie; Tang, Aiwei

2017-05-01

All-inorganic halide perovskites have become one of the most prospective materials for lightening and display technology due to their color-tunable and narrow-band emission. Herein, we have systematically studied the effects of organic amines with different hydrocarbon chain length on the optical properties and morphology as well as the crystal structure of colloidal CsPbBr3 nanocrystals (NCs), which were synthesized in the presence of oleic acid (OA) and organic amines by using a simple hot-injection approach. The hydrocarbon chain length has shown an independent correlation to the morphology and crystal structure of the as-obtained CsPbBr3 NCs at 160 °C, but their optical properties can be affected to some extent. The photoluminescence quantum yields (PLQYs) of the CsPbBr3 NCs synthesized in the presence of organic amines with long carbon chain length are generally in the range of 55-80% for different reaction time, but the PLQYs of less than 20% are obtained for the products synthesized in the presence of octylamine (OTAm) with short carbon chain length. The effects of the reaction temperature on the optical properties, size and crystal structure of the CsPbBr3 NCs synthesized in the presence of cetylamine (CTAm) are studied. Interestingly, some nanoplates also appear in these CsPbBr3 NCs obtained at relatively low temperatures (120 and 140 °C), which have a strong tendency to self-assemble into face-to-face nanostructures. Such a similar self-assembly behavior is also observed in the product synthesized in the presence of oleylamine (OLAm), but only flat nanoplates are observed in the products in the presence of OTAm at 120 °C. The results indicate that the lower reaction temperature and hydrocarbon chain length of the organic ligands play a significant role in the self-assembly of CsPbBr3 NCs. This work opens up an alternative approach to controllable-synthesis of perovskite NCs through varying the carbon chain length of organic surfactants, and enlightens

Effects of medium-chain triacylglycerols on Maillard reaction in bread baking.

Science.gov (United States)

Toyosaki, Toshiyuki

2018-06-01

To investigate the relationship between the fatty acid composition of medium-chain triacylglycerols (MCTs) and the Maillard reaction induced during bread baking, a comparison with various fatty acids was conducted. Saturated fatty acids had a remarkable inhibitory effect on the amount of advanced glycation end products (AGEs) generated from the Maillard reaction in bread baking compared to unsaturated fatty acids. The amount of AGEs produced by each fatty acid (mg kg -1 ) was as follows: C18:0, 18.7; C12:0, 35.2; C16:0, 21.4; C18:0, 38.2; C18:1, 68.7; C18:2, 80.1; C20:4, 80.8; C22:4, 89.8. Saturated fatty acids were possibly involved in the Maillard reaction and, as a result, acted to inhibit it. In the case of unsaturated fatty acids, amounts of AGEs during the Maillard reaction in baking tended to increase as the degree of unsaturation increased. In other words, there was a positive correlation between the degree of unsaturation and the amount of AGEs. It was also confirmed that the air pore distribution in baked bread was closely related to AGEs. These results led us to conclude that the fatty acid composition of the added lipids also influences properties that determine the tastiness of bread. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

PRODUCTION OF MEDIUM-CHAIN ACYLGLYCEROLS BY LIPASE ESTERIFICATION IN PACKED BED REACTOR: PROCESS OPTIMIZATION BY RESPONSE SURFACE METHODOLOGY

Directory of Open Access Journals (Sweden)

ZANARIAH MOHD DOM

2014-06-01

Full Text Available Medium-chain acylglycerols (or glycerides are formed of mono-, di- and triacylglycerol classes. In this study, an alternative method to produce MCA from esterifying palm oil fatty acid distillate (PFAD with the presence of oil palm mesocarp lipase (OPML which is a plant-sourced lipase and PFAD is also cheap by-product is developed in a packed bed reactor. The production of medium-chain acylglycerols (MCA by lipase-catalysed esterification of palm oil fatty acid distillate with glycerol are optimize in order to determine the factors that have significant effects on the reaction condition and high yield of MCA. Response surface methodology (RSM was applied to optimize the reaction conditions. The reaction conditions, namely, the reaction time (30-240 min, enzyme load (0.5-1.5 kg, silica gel load (0.2-1.0 kg, and solvent amount (200-600 vol/wt. Reaction time, enzyme loading and solvent amount strongly effect MCA synthesis (p0.05 influence on MCA yield. Best-fitting models were successfully established for MCA yield (R 2 =0.9133. The optimum MCA yield were 75% from the predicted value and 75.4% from the experimental data for 6 kg enzyme loading, a reaction time of 135min and a solvent amount of 350 vol/wt at 65ºC reaction temperature. Verification of experimental results under optimized reaction conditions were conducted, and the results agreed well with the predicted range. Esterification products (mono-, di- and triacylglycerol from the PBR were identified using Thin Layer Chromatography method. The chromatograms showed the successful fractionation of esterified products in this alternative method of process esterification.

Identifying of meat species using polymerase chain reaction (PCR)

International Nuclear Information System (INIS)

Foong, Chow Ming; Sani, Norrakiah Abdullah

2013-01-01

Meat has been widely consumed as an important protein source in daily life of human. Furthermore, with busy and intense urban lifestyle, processed food is now one of the main protein sources of one’s diet. Consumers rely on the food labeling to decide if the meat product purchased is safe and reliable. Therefore, it is important to ensure the food labeling is done in a correct manner to avoid consumer fraud. More consumers are now concern about the food quality and safety as compared to before. This study described the meat species identification and detection method using Polymerase Chain Reaction (PCR) in 8 types of meats (cattle, buffalo, goat, sheep, chicken, duck, pork and horse). The objective of this study is to decide on the specificity of oligonucleotide sequences obtained from previous study. There were 5 proposed oligonucleotide primer in this study. The main important finding in this work is the specificity of oligonucleotide primers to raw meats. It if found that the oligonucleotide primers proposed were not specific to the local raw meat species. Therefore, further study is needed to obtain a species-specific oligonucletide primers for PCR, in order to be applied in food product testing

Identifying of meat species using polymerase chain reaction (PCR)

Energy Technology Data Exchange (ETDEWEB)

Foong, Chow Ming; Sani, Norrakiah Abdullah [School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600, Bangi, Selangor (Malaysia)

2013-11-27

Meat has been widely consumed as an important protein source in daily life of human. Furthermore, with busy and intense urban lifestyle, processed food is now one of the main protein sources of one’s diet. Consumers rely on the food labeling to decide if the meat product purchased is safe and reliable. Therefore, it is important to ensure the food labeling is done in a correct manner to avoid consumer fraud. More consumers are now concern about the food quality and safety as compared to before. This study described the meat species identification and detection method using Polymerase Chain Reaction (PCR) in 8 types of meats (cattle, buffalo, goat, sheep, chicken, duck, pork and horse). The objective of this study is to decide on the specificity of oligonucleotide sequences obtained from previous study. There were 5 proposed oligonucleotide primer in this study. The main important finding in this work is the specificity of oligonucleotide primers to raw meats. It if found that the oligonucleotide primers proposed were not specific to the local raw meat species. Therefore, further study is needed to obtain a species-specific oligonucletide primers for PCR, in order to be applied in food product testing.

product chain collaboration and environmental innovations

DEFF Research Database (Denmark)

Remmen, Arne; Mosgaard, Mette

2004-01-01

The paper  builds upon a case study from a number of electronic companies in Denmark and describes from an organisational perspective how organisations make environmental innovations in the product chain.......The paper  builds upon a case study from a number of electronic companies in Denmark and describes from an organisational perspective how organisations make environmental innovations in the product chain....

Polymerase chain reaction for the detection of Mycobacterium leprae

NARCIS (Netherlands)

Hartskeerl, R. A.; de Wit, M. Y.; Klatser, P. R.

1989-01-01

A polymerase chain reaction (PCR) using heat-stable Taq polymerase is described for the specific detection of Mycobacterium leprae, the causative agent of leprosy. A set of primers was selected on the basis of the nucleotide sequence of a gene encoding the 36 kDa antigen of M. leprae. With this set

Automatic polymerase chain reaction product detection system for food safety monitoring using zinc finger protein fused to luciferase

Energy Technology Data Exchange (ETDEWEB)

Yoshida, Wataru; Kezuka, Aki; Murakami, Yoshiyuki; Lee, Jinhee; Abe, Koichi [Department of Biotechnology and Life Science, Tokyo University of Agriculture and Technology, 2-24-16 Naka-cho, Koganei, Tokyo 184-8588 (Japan); Motoki, Hiroaki; Matsuo, Takafumi; Shimura, Nobuaki [System Instruments Co., Ltd., 776-2 Komiya-cho, Hachioji, Tokyo 192-0031 (Japan); Noda, Mamoru; Igimi, Shizunobu [Division of Biomedical Food Research, National Institute of Health Sciences, 1-18-1 Kamiyoga, Setagaya-ku, Tokyo 158-8501 (Japan); Ikebukuro, Kazunori, E-mail: ikebu@cc.tuat.ac.jp [Department of Biotechnology and Life Science, Tokyo University of Agriculture and Technology, 2-24-16 Naka-cho, Koganei, Tokyo 184-8588 (Japan)

2013-11-01

Graphical abstract: -- Highlights: •Zif268 fused to luciferase was used for E. coli O157, Salmonella and coliform detection. •Artificial zinc finger protein fused to luciferase was constructed for Norovirus detection. •An analyzer that automatically detects PCR products by zinc finger protein fused to luciferase was developed. •Target pathogens were specifically detected by the automatic analyzer with zinc finger protein fused to luciferase. -- Abstract: An automatic polymerase chain reaction (PCR) product detection system for food safety monitoring using zinc finger (ZF) protein fused to luciferase was developed. ZF protein fused to luciferase specifically binds to target double stranded DNA sequence and has luciferase enzymatic activity. Therefore, PCR products that comprise ZF protein recognition sequence can be detected by measuring the luciferase activity of the fusion protein. We previously reported that PCR products from Legionella pneumophila and Escherichia coli (E. coli) O157 genomic DNA were detected by Zif268, a natural ZF protein, fused to luciferase. In this study, Zif268–luciferase was applied to detect the presence of Salmonella and coliforms. Moreover, an artificial zinc finger protein (B2) fused to luciferase was constructed for a Norovirus detection system. In the luciferase activity detection assay, several bound/free separation process is required. Therefore, an analyzer that automatically performed the bound/free separation process was developed to detect PCR products using the ZF–luciferase fusion protein. By means of the automatic analyzer with ZF–luciferase fusion protein, target pathogenic genomes were specifically detected in the presence of other pathogenic genomes. Moreover, we succeeded in the detection of 10 copies of E. coli BL21 without extraction of genomic DNA by the automatic analyzer and E. coli was detected with a logarithmic dependency in the range of 1.0 × 10 to 1.0 × 10{sup 6} copies.

Automatic polymerase chain reaction product detection system for food safety monitoring using zinc finger protein fused to luciferase

International Nuclear Information System (INIS)

Yoshida, Wataru; Kezuka, Aki; Murakami, Yoshiyuki; Lee, Jinhee; Abe, Koichi; Motoki, Hiroaki; Matsuo, Takafumi; Shimura, Nobuaki; Noda, Mamoru; Igimi, Shizunobu; Ikebukuro, Kazunori

2013-01-01

Graphical abstract: -- Highlights: •Zif268 fused to luciferase was used for E. coli O157, Salmonella and coliform detection. •Artificial zinc finger protein fused to luciferase was constructed for Norovirus detection. •An analyzer that automatically detects PCR products by zinc finger protein fused to luciferase was developed. •Target pathogens were specifically detected by the automatic analyzer with zinc finger protein fused to luciferase. -- Abstract: An automatic polymerase chain reaction (PCR) product detection system for food safety monitoring using zinc finger (ZF) protein fused to luciferase was developed. ZF protein fused to luciferase specifically binds to target double stranded DNA sequence and has luciferase enzymatic activity. Therefore, PCR products that comprise ZF protein recognition sequence can be detected by measuring the luciferase activity of the fusion protein. We previously reported that PCR products from Legionella pneumophila and Escherichia coli (E. coli) O157 genomic DNA were detected by Zif268, a natural ZF protein, fused to luciferase. In this study, Zif268–luciferase was applied to detect the presence of Salmonella and coliforms. Moreover, an artificial zinc finger protein (B2) fused to luciferase was constructed for a Norovirus detection system. In the luciferase activity detection assay, several bound/free separation process is required. Therefore, an analyzer that automatically performed the bound/free separation process was developed to detect PCR products using the ZF–luciferase fusion protein. By means of the automatic analyzer with ZF–luciferase fusion protein, target pathogenic genomes were specifically detected in the presence of other pathogenic genomes. Moreover, we succeeded in the detection of 10 copies of E. coli BL21 without extraction of genomic DNA by the automatic analyzer and E. coli was detected with a logarithmic dependency in the range of 1.0 × 10 to 1.0 × 10 6 copies

Transformational leadership: a cascading chain reaction.

Science.gov (United States)

Murphy, Lorraine

2005-03-01

Historical influences still permeate contemporary nursing practise. These are mirrored in organizational philosophies, transactional and autocratic leadership styles and disempowered staff. Whilst there is disparity amongst the theorists' definitions of leadership, there is consensus pertaining to the attributes necessary to realize effective leadership. Transformational leadership is heralded as new criterion for nurse managers, and can be achieved through training, education and professional development in key leadership competencies. To achieve a chain reaction, charismatic transformational leaders espouse intellectual stimulation and individual consideration to empower staff and enhance patient care. Nurse managers that develop and foster transformational leadership can surmount oppressive traditions and confidently navigate a complex and rapidly changing health care environment.

DCHAIN: A user-friendly computer program for radioactive decay and reaction chain calculations

International Nuclear Information System (INIS)

East, L.V.

1994-05-01

A computer program for calculating the time-dependent daughter populations in radioactive decay and nuclear reaction chains is described. Chain members can have non-zero initial populations and be produced from the preceding chain member as the result of radioactive decay, a nuclear reaction, or both. As presently implemented, chains can contain up to 15 members. Program input can be supplied interactively or read from ASCII data files. Time units for half-lives, etc. can be specified during data entry. Input values are verified and can be modified if necessary, before used in calculations. Output results can be saved in ASCII files in a format suitable for including in reports or other documents. The calculational method, described in some detail, utilizes a generalized form of the Bateman equations. The program is written in the C language in conformance with current ANSI standards and can be used on multiple hardware platforms

Molecular typing of Lactobacillus brevis isolates from Korean food using repetitive element-polymerase chain reaction.

Science.gov (United States)

Kaur, Jasmine; Sharma, Anshul; Lee, Sulhee; Park, Young-Seo

2018-06-01

Lactobacillus brevis is a part of a large family of lactic acid bacteria that are present in cheese, sauerkraut, sourdough, silage, cow manure, feces, and the intestinal tract of humans and rats. It finds its use in food fermentation, and so is considered a "generally regarded as safe" organism. L. brevis strains are extensively used as probiotics and hence, there is a need for identifying and characterizing these strains. For identification and discrimination of the bacterial species at the subspecific level, repetitive element-polymerase chain reaction method is a reliable genomic fingerprinting tool. The objective of the present study was to characterize 13 strains of L. brevis isolated from various fermented foods using repetitive element-polymerase chain reaction. Repetitive element-polymerase chain reaction was performed using three primer sets, REP, Enterobacterial Repetitive Intergenic Consensus (ERIC), and (GTG) 5 , which produced different fingerprinting patterns that enable us to distinguish between the closely related strains. Fingerprinting patterns generated band range in between 150 and 5000 bp with REP, 200-7500 bp with ERIC, and 250-2000 bp with (GTG) 5 primers, respectively. The Jaccard's dissimilarity matrices were used to obtain dendrograms by the unweighted neighbor-joining method using genetic dissimilarities based on repetitive element-polymerase chain reaction fingerprinting data. Repetitive element-polymerase chain reaction proved to be a rapid and easy method that can produce reliable results in L. brevis species.

Time-resolved FTIR [Fourier transform infrared] emission studies of laser photofragmentation and chain reactions

International Nuclear Information System (INIS)

Leone, S.R.

1990-01-01

Recent progress is described resulting from the past three years of DOE support for studies of combustion-related photofragmentation dynamics, energy transfer, and reaction processes using a time-resolved Fourier transform infrared (FTIR) emission technique. The FTIR is coupled to a high repetition rate excimer laser which produces radicals by photolysis to obtain novel, high resolution measurements on vibrational and rotational state dynamics. The results are important for the study of numerous radical species relevant to combustion processes. The method has been applied to the detailed study of photofragmentation dynamics in systems such as acetylene, which produces C 2 H; chlorofluoroethylene to study the HF product channel; vinyl chloride and dichloroethylene, which produce HCl; acetone, which produces CO and CH 3 ; and ammonia, which produces NH 2 . In addition, we have recently demonstrated use of the FTIR technique for preliminary studies of energy transfer events under near single collision conditions, radical-radical reactions, and laser-initiated chain reaction processes

Polymerase chain reaction: Theory, practice and application: A review

Directory of Open Access Journals (Sweden)

S E Atawodi

2010-01-01

Full Text Available Polymerase Chain Reaction (PCR is a rapid procedure for in vitro enzymatic amplification of specific DNA sequences using two oligonucleotide primers that hybridize to opposite strands and flank the region of interest in the target DNA. Repetitive cycles involving template denaturation, primer annealing and the extension of the annealed primers by DNA polymerase, result in the exponential accumulation of a specific fragment whose termini are defined by 5′ end of the primers. The primer extension products synthesized in one cycle can serve as a template in the next. Hence the number of target DNA copies approximately doubles at every cycle. Since its inception, PCR has had an enormous impact in both basic and diagnostic aspects of molecular biology. Like the PCR itself, the number of applications has been accumulating exponentially. It is therefore recommended that relevant scientists and laboratories in developing countries like Nigeria should acquire this simple and relatively inexpensive, but rather robust technology.

Development of the polymerase chain reaction for diagnosis of chancroid.

Science.gov (United States)

Chui, L; Albritton, W; Paster, B; Maclean, I; Marusyk, R

1993-01-01

The published nucleotide sequences of the 16S rRNA gene of Haemophilus ducreyi were used to develop primer sets and probes for the diagnosis of chancroid by polymerase chain reaction (PCR) DNA amplification. One set of broad specificity primers yielded a 303-bp PCR product from all bacteria tested. Two 16-base probes internal to this sequence were species specific for H. ducreyi when tested with 12 species of the families Pasteurellaceae and Enterobacteriaceae. The two probes in combination with the broad specificity primers were 100% sensitive with 51 strains of H. ducreyi isolated from six continents over a 15-year period. The direct detection of H. ducreyi from 100 clinical specimens by PCR showed a sensitivity of 83 to 98% and a specificity of 51 to 67%, depending on the number of amplification cycles. Images PMID:8458959

Use of competitive polymerase chain reaction to determine HIV-1 levels in response to antiviral treatments

NARCIS (Netherlands)

Bruisten, S. M.; Koppelman, M. H.; Roos, M. T.; Loeliger, A. E.; Reiss, P.; Boucher, C. A.; Huisman, H. G.

1993-01-01

OBJECTIVE: To develop a competitive polymerase chain reaction technique with which to evaluate the usefulness of HIV-1 level as a marker of response to antiviral treatment. DESIGN: HIV-1 sequences were assessed by competitive polymerase chain reaction in four subjects participating in a double-blind

Semi-arid development: competitiveness factors in biodiesel productive chain

OpenAIRE

Breno Barros Telles do Carmo; Dmontier Pinheiro Aragão; Heráclito Lopes Jaguaribe Pontes; Bruno Magalhães Ribeiro; Marcos Ronaldo Albertin

2009-01-01

The new global market competitiveness considerer the competition between productive chains (PC) or supply chains, not just between enterprises. In this case, it can be observed collaboration and cooperation enterprises that dispute with others productives chain. The PC competitiveness can be impaired if is subject by inhibitors factors, that can impairer the performance. This paper analyses these competitiveness factors inhibitors in biodiesel productive chain (CPB) in semi-arid area: exporte...

Use of polymerase chain reaction for detection of Chlamydia trachomatis

DEFF Research Database (Denmark)

Østergaard, Lars; Birkelund, Svend; Christiansen, Gunna

1990-01-01

A polymerase chain reaction (PCR) assay was developed for detection of Chlamydia trachomatis DNA. From the published sequence of the common C. trachomatis plasmid, two primer sets were selected. Detection of amplified sequences was done by agarose gel electrophoresis of cleaved or uncleaved...

Studying the effect of graphene-ZnO nanocomposites on polymerase chain reaction

Energy Technology Data Exchange (ETDEWEB)

Sharma, Vinay, E-mail: winn201@gmail.com; Rajaura, Rajveer; Sharma, Preetam Kumar; Srivastava, Rishabh Ronin [Centre for Converging Technologies, University of Rajasthan, Jaipur 302004 (India); Sharma, Shyam Sundar [Govt. women Engineering College, Ajmer (India); Agrawal, Kailash [Centre for Converging Technologies, University of Rajasthan, Jaipur 302004 (India); Department of Botany, University of Rajasthan, Jaipur 302004 (India)

2016-05-06

An emerging area of research is improving the efficiency of the polymerase chain reaction (PCR) by using nanoparticles. With graphene nano-flakes showing promising results, in this paper we report the effect of Graphene-ZnO nanocomposites on Polymerase Chain reaction (PCR) efficiency. G-ZnO nanocomposites were efficiently synthesized via in situ chemical method. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) image confirms the formation of nanocomposites. ZnO nanoparticles of size range ~20-30 nm are uniformly attached on the graphene sheets. No amplification during PCR indicates inhibitory activity of G-ZnO nanocomposites which points the fingers at ZnO moiety of the G-ZnO composite for no amplification during our PCR reaction. Further work should concentrate on finding out the main inhibitory mechanism involved in inhibition of PCR using G-ZnO composites.

Role of Polymerase Chain Reaction (PCR) in the detection of ...

African Journals Online (AJOL)

Background: Staphylococcus aureus is mainly acquired from hospital infections and demonstrated the ability of developing resistance to many antibiotics. Polymerase Chain Reaction (PCR) was used to identify antibiotic-resistant isolates. This study was conducted in Al-Mujtahed, Al-Mouwasat and the Children Hospitals in ...

The use of real-time polymerase chain reaction for rapid diagnosis of skeletal tuberculosis.

Science.gov (United States)

Kobayashi, Naomi; Fraser, Thomas G; Bauer, Thomas W; Joyce, Michael J; Hall, Gerri S; Tuohy, Marion J; Procop, Gary W

2006-07-01

We identified Mycobacterium tuberculosis DNA using real-time polymerase chain reaction on a specimen from an osteolytic lesion of a femoral condyle, in which the frozen section demonstrated granulomas. The process was much more rapid than is possible with culture. The rapid detection of M tuberculosis and the concomitant exclusion of granulomatous disease caused by nontuberculous mycobacteria or systemic fungi are necessary to appropriately treat skeletal tuberculosis. The detection and identification of M tuberculosis by culture may require several weeks using traditional methods. The real-time polymerase chain reaction method used has been shown to be rapid and reliable, and is able to detect and differentiate both tuberculous and nontuberculous mycobacteria. Real-time polymerase chain reaction may become a diagnostic standard for the evaluation of clinical specimens for the presence of mycobacteria; this case demonstrates the potential utility of this assay for the rapid diagnosis of skeletal tuberculosis.

Cylindrical polymer brushes with dendritic side chains by iterative anionic reactions

KAUST Repository

Zhang, Hefeng; Qu, Chengke; He, Junpo

2015-01-01

We report in this paper an easy method for the synthesis of cylindrical polymer brushes with dendritic side chains through anionic reaction. The synthesis is accomplished by iteratively grafting a living block copolymer, polyisoprene-. b

Detection of Vibrio spp. in shrimp from aquaculture sites in Iran using polymerase chain reaction (PCR)

OpenAIRE

Faham Khamesipour; Esmat Noshadi; Mitra Moradi; Mehdi Raissy

2014-01-01

Shrimp is one of the most important fishery products of the coastal provinces in the Persian Gulf in Iran. Vibriosis has been an important cause of production loss due to bacterial disease in shrimp farms in south Iran in recent years. The objective of this study was to detect the prevalence of Vibrio spp. in shrimp samples from farms in the southern provinces of Iran by polymerase chain reaction (PCR). A total number of 36 shrimp were caught from south coast of Iran and were stud...

Polymerase chain reaction as a tool for developing stress protein probes

Energy Technology Data Exchange (ETDEWEB)

Cochrane, B.J.; Mattley, Y.D. (Univ. of South Florida, Tampa, FL (United States). Dept. of Biology); Snell, T.W. (Georgia Inst. of Tech., Atlanta, GA (United States). Div. of Biology)

1994-08-01

Because of the high degree of evolutionary conservation of stress proteins, potential exists for the development of nucleic acid probes from particular species that could be used to monitor stress-related changes in mRNA abundance. The polymerase chain reaction (PCR) is a powerful tool that can be applied to the generation of these probes, provided that primer sequences can be identified that specifically amplify sequences of interest from a wide variety of organisms. The authors identified such sequences from multiple alignments of published chaperonin and stress-70 sequences, and tested their ability to amplify appropriately sized fragments from genomic DNA from a variety of vertebrates and invertebrates. Although no primer pair could be used successfully with all species, the authors were able to derive specific products from most species by testing different pairs. One primer pair for chaperonin proved particularly useful. Products were obtained from all tested species, and with a single exception (human), these primers appeared to amplify a single copy sequence. The authors determined the nucleotide sequence of the product obtained from the rotifer Brachionus plicatilis and determined by phylogenetic analysis of the inferred protein product that the product obtained is most likely derived from a rotifer DNA template. Finally, the authors show that this product can be used to detect changes in abundance of homologous mRNA in heat-stressed rotifers.

Reaction of oxygen with the respiratory chain in cells and tissues.

Science.gov (United States)

Chance, B

1965-09-01

This paper considers the way in which the oxygen reaction described by Dr. Nicholls and the ADP control reactions described by Dr. Racker could cooperate to establish a purposeful metabolic control phenomenon in vivo. This has required an examination of the kinetic properties of the respiratory chain with particular reference to methods for determinations of oxygen affinity (K(m)). The constant parameter for tissue respiration is k(1), the velocity constant for the reaction of oxygen with cytochrome oxidase. Not only is this quantity a constant for a particular tissue or mitochondria; it appears to vary little over a wide range of biological material, and for practical purposes a value of 5 x 10(7) at 25 degrees close to our original value (20) is found to apply with adequate accuracy for calculation of K(m) for mammalia. The quantity which will depend upon the tissue and its metabolic state is the value of K(m) itself, and K(m) may be as large as 0.5 microM and may fall to 0.05 microM or less in resting, controlled, or inhibited states. The control characteristic for ADP may depend upon the electron flux due to the cytochrome chain (40); less ADP is required to activate the slower electron transport at lower temperatures than at higher temperatures. The affinity constants for ADP control appear to be less dependent upon substrate supplied to the system. The balance of ADP and oxygen control in vivo is amply demonstrated experimentally and is dependent on the oxygen concentration as follows. In the presence of excess oxygen, control may be due to the ADP or phosphate (or substrate), and the kinetics of oxygen utilization will be independent of the oxygen concentration. As the oxygen concentration is diminished, hemoglobin becomes disoxygenated, deep gradients of oxygen concentration develop in the tissue, and eventually cytochrome oxidase becomes partially and then completely reduced. DPN at this point will become reduced and the electron flow diminished. The rate

Polymerase Chain Reaction (PCR) provides a superior tool for the ...

African Journals Online (AJOL)

Polymerase Chain Reaction (PCR) provides a superior tool for the diagnosis of Pneumococcal Infection in Burkina Faso. Y Chaibou, M Congo/Ouedraogo, I Sanou, H Somlare, K Ouattara, CM Kienou, H Belem, E Sampo, SA Traore, R Traore/Ouedraogo, C Hatcher, L Mayer, X Wang, L Sangare ...

Evaluation of a new HTLV-I/II polymerase chain reaction

NARCIS (Netherlands)

Vrielink, H.; Zaaijer, H. L.; Cuypers, H. T.; van der Poel, C. L.; Woerdeman, M.; Lelie, P. N.; Winkel, C.; Reesink, H. W.

1997-01-01

AIM: Evaluation of a qualitative HTLV-I/II DNA polymerase chain reaction (PCR) test for the detection of HTLV-I/II DNA (Roche Diagnostic Systems, Branchburg, N.J., USA) in various panels. METHODS: The panels consisted of fresh EDTA blood samples from blood donors who were anti-HTLV-I/II ELISA

Density functional computational studies on the glucose and glycine Maillard reaction: Formation of the Amadori rearrangement products

Science.gov (United States)

Jalbout, Abraham F.; Roy, Amlan K.; Shipar, Abul Haider; Ahmed, M. Samsuddin

Theoretical energy changes of various intermediates leading to the formation of the Amadori rearrangement products (ARPs) under different mechanistic assumptions have been calculated, by using open chain glucose (O-Glu)/closed chain glucose (A-Glu and B-Glu) and glycine (Gly) as a model for the Maillard reaction. Density functional theory (DFT) computations have been applied on the proposed mechanisms under different pH conditions. Thus, the possibility of the formation of different compounds and electronic energy changes for different steps in the proposed mechanisms has been evaluated. B-Glu has been found to be more efficient than A-Glu, and A-Glu has been found more efficient than O-Glu in the reaction. The reaction under basic condition is the most favorable for the formation of ARPs. Other reaction pathways have been computed and discussed in this work.0

Optimalization of production inside logistics chain for 21st century

Directory of Open Access Journals (Sweden)

Drago Pupavac

2006-12-01

Full Text Available In today’s world numerous logistics chains exist, competing for similar jobs in different markets throughout the world. By connecting the supply and demand, i.e. production and consumption, logistics chains create national, regional and global logistics network which task is to maximise total generated value. Generated valueis defined as the difference between the price of finished product or service and the input necessary to create such products. The chain profitability is shown by the difference between the income obtained through sale of products or services and total expenditure in that chain. Accordingly, this scientific debate researches the possibilityof production optimisation within logistic chain by application of dynamic programming method with emphasis on information technologies.

Dependence of the product chain-length on detergents for long-chain E-polyprenyl diphosphate synthases

Science.gov (United States)

Pan, Jian-Jung; Ramamoorthy, Gurusankar; Poulter, C. Dale

2013-01-01

Long-chain E-polyprenyl diphosphate synthases (E-PDS) catalyze repetitive addition of isopentenyl diphosphate (IPP) to the growing prenyl chain of an allylic diphosphate. The polyprenyl diphosphate products are required for the biosynthesis of ubiquinones and menaquinones required for electron transport during oxidative phosphorylation to generate ATP. In vitro, the long-chain PDSs require addition of phospholipids or detergents to the assay buffer to enhance product release and maintain efficient turnover. During preliminary assays of product chain-length with anionic, zwitterionic, and non-ionic detergents, we discovered considerable variability. Examination of a series of non-ionic PEG detergents with several long-chain E-PDSs from different organisms revealed that in vitro incubations with nonaethylene glycol monododecyl ether or Triton X-100 typically gave chain lengths that corresponded to those of the isoprenoid moieties in respiratory quinones synthesized in vivo. In contrast incubations in buffer with n-butanol, CHAPS, DMSO, n-octyl-β-glucopyranoside, or β-cyclodextrin or in buffer without detergent typically proceeded more slowly and gave a broad range of chain lengths. PMID:23802587

Detection of canine cytokine gene expression by reverse transcription-polymerase chain reaction.

Science.gov (United States)

Pinelli, E; van der Kaaij, S Y; Slappendel, R; Fragio, C; Ruitenberg, E J; Bernadina, W; Rutten, V P

1999-08-02

Further characterization of the canine immune system will greatly benefit from the availability of tools to detect canine cytokines. Our interest concerns the study on the role of cytokines in canine visceral leishmaniasis. For this purpose, we have designed specific primers using previously published sequences for the detection of canine IL-2, IFN-gamma and IL10 mRNA by reverse transcription-polymerase chain reaction (RT-PCR). For IL-4, we have cloned and sequenced this cytokine gene, and developed canine-specific primers. To control for sample-to-sample variation in the quantity of mRNA and variation in the RT and PCR reactions, the mRNA levels of glyceraldehyde-3-phosphate dehydrogenase (G3PDH), a housekeeping gene, were determined in parallel. Primers to amplify G3PDH were designed from consensus sequences obtained from the Genbank database. The mRNA levels of the cytokines mentioned here were detected from ConA-stimulated peripheral mononuclear cells derived from Leishmania-infected dogs. A different pattern of cytokine production among infected animals was found.

Detecting beef meatball contamination with polymerase chain reaction

Directory of Open Access Journals (Sweden)

Hoda A.

2017-10-01

Full Text Available The objective of the study was to describe how much rat and swine primer developed from cytochrome b could detect rat and pork in processed beef products sold in North Maluku. The settings of the study were the traditional markets and supermarkets in several cities in North Maluku such as Ternate, Tidore Kepulauan, West Halmahera, North Halmahera, Central Halmahera, South Halmahera, East Halmahera, Sula Island and Morotai Island. The data collection lasted between May and June, 2015. The samples were analyzed in the Biotechnology Lab of Unkhair in July, 2015. To detect rat and swine DNA, the researchers used the PCR (Polymerase Chain Reaction method with Top Taq master mix Kit kit (250 (Catalog no. 200403 Swine Primer: Forward: 5'CTA CAT AAG ATAT ATC CAC CAC A 3 'Reverse: 5' ACA TTG TGG GAT CTT CTA GGT 3 'Product size: 290 bp. Rat Primer: forward SIM (5'-GACCTCCCAGCTCCATCAAACATCTCATCTTGATGAAA-3'. Reverse (5'GAATGGGATTTT GTTGGAGTTT-3 '. Out of 41 samples, sample 3, 4 and 5 taken in Jailolo contained rat DNA (positive; the samples were amplified with 499 base pair length (bp. In addition, sample 2, 7, 8 and 10 from Ternate as well as sample 4 from Morotai Island was also found positive (containing rat DNA. In terms of swine DNA, all of the samples came back negative. The amplification showed that none of the meatball samples contained pork. No pig DNA was amplified in the gel.

Exploiting Fission Chain Reaction Dynamics to Image Fissile Materials

Science.gov (United States)

Chapman, Peter Henry

Radiation imaging is one potential method to verify nuclear weapons dismantlement. The neutron coded aperture imager (NCAI), jointly developed by Oak Ridge National Laboratory (ORNL) and Sandia National Laboratories (SNL), is capable of imaging sources of fast (e.g., fission spectrum) neutrons using an array of organic scintillators. This work presents a method developed to discriminate between non-multiplying (i.e., non-fissile) neutron sources and multiplying (i.e., fissile) neutron sources using the NCAI. This method exploits the dynamics of fission chain-reactions; it applies time-correlated pulse-height (TCPH) analysis to identify neutrons in fission chain reactions. TCPH analyzes the neutron energy deposited in the organic scintillator vs. the apparent neutron time-of-flight. Energy deposition is estimated from light output, and time-of-flight is estimated from the time between the neutron interaction and the immediately preceding gamma interaction. Neutrons that deposit more energy than can be accounted for by their apparent time-of-flight are identified as fission chain-reaction neutrons, and the image is reconstructed using only these neutron detection events. This analysis was applied to measurements of weapons-grade plutonium (WGPu) metal and 252Cf performed at the Nevada National Security Site (NNSS) Device Assembly Facility (DAF) in July 2015. The results demonstrate it is possible to eliminate the non-fissile 252Cf source from the image while preserving the fissileWGPu source. TCPH analysis was also applied to additional scenes in which theWGPu and 252Cf sources were measured individually. The results of these separate measurements further demonstrate the ability to remove the non-fissile 252Cf source and retain the fissileWGPu source. Simulations performed using MCNPX-PoliMi indicate that in a one hour measurement, solid spheres ofWGPu are retained at a 1sigma level for neutron multiplications M -˜ 3.0 and above, while hollowWGPu spheres are

Application of the arbitrarily primed polymerase chain reaction for the detection of DNA damage

International Nuclear Information System (INIS)

Atienzar, F.; Evenden, A.; Jha, A.; Depledge, M.; Savva, D.; Walker, C.

1998-01-01

The technique of arbitrarily primed polymerase chain reaction (AP-PCR) shows potential as a selective and sensitive assay for the detection of xenobiotic-induced DNA damage. Problems, however, may occur in AP-PCR, diminishing its discriminative abilities. These problems include the presence of spurious amplification products in non-template-containing negative control reactions, and a lack of reproducibility amongst amplification patterns. Experiments designed to remove contaminated nucleic acids by ultraviolet (UV) treatment indicated that spurious bands are the result of aberrant primer-induced polymerisation, an event shown to be influenced by the concentration of deoxynucleotide triphosphates (dNTP) present in the reaction mixtures. Optimisation of dNTP concentration from 0.22 to 0.33 MM resulted in clear negative controls and highly reproducible amplification patterns with all DNA templates. As an example of the application of the method, in the present study, the macroalga Palmaria palmata (Rhodophyta) was exposed to UV A and B radiations. The study shows that the AP-PCR method can detect DNA damage and may be useful in detecting such damage following exposure of cells to xenobiotics. (author)

Application of the arbitrarily primed polymerase chain reaction for the detection of DNA damage

Energy Technology Data Exchange (ETDEWEB)

Atienzar, F.; Evenden, A.; Jha, A.; Depledge, M. [University of Plymouth (United Kingdom). Environmental Research Centre; Child, P. [ADAS Boxworth (United Kingdom); Savva, D.; Walker, C. [University of Reading (United Kingdom). School of Animal and Microbial Sciences

1998-07-01

The technique of arbitrarily primed polymerase chain reaction (AP-PCR) shows potential as a selective and sensitive assay for the detection of xenobiotic-induced DNA damage. Problems, however, may occur in AP-PCR, diminishing its discriminative abilities. These problems include the presence of spurious amplification products in non-template-containing negative control reactions, and a lack of reproducibility amongst amplification patterns. Experiments designed to remove contaminated nucleic acids by ultraviolet (UV) treatment indicated that spurious bands are the result of aberrant primer-induced polymerisation, an event shown to be influenced by the concentration of deoxynucleotide triphosphates (dNTP) present in the reaction mixtures. Optimisation of dNTP concentration from 0.22 to 0.33 MM resulted in clear negative controls and highly reproducible amplification patterns with all DNA templates. As an example of the application of the method, in the present study, the macroalga Palmaria palmata (Rhodophyta) was exposed to UV A and B radiations. The study shows that the AP-PCR method can detect DNA damage and may be useful in detecting such damage following exposure of cells to xenobiotics. (author)

Reconfiguring The Supply Chain For Complex Engineered Products

DEFF Research Database (Denmark)

Wæhrens, Brian Vejrum; Asmussen, Jesper Normann

2016-01-01

of the SC, the product and market requirements. This paper seeks to investigate the factors which create a need for supply chain reconfiguration in the context of the Complex Product Systems, together with the enablers and barriers for successfully realizing supply chain improvements through reconfiguration....

Analytic study of the chain dark decomposition reaction of iodides - atomic iodine donors - in the active medium of a pulsed chemical oxygen-iodine laser: 1. Criteria for the development of the branching chain dark decomposition reaction of iodides

International Nuclear Information System (INIS)

Andreeva, Tamara L; Kuznetsova, S V; Maslov, Aleksandr I; Sorokin, Vadim N

2009-01-01

The scheme of chemical processes proceeding in the active medium of a pulsed chemical oxygen-iodine laser (COIL) is analysed. Based on the analysis performed, the complete system of differential equations corresponding to this scheme is replaced by a simplified system of equations describing in dimensionless variables the chain dark decomposition of iodides - atomic iodine donors, in the COIL active medium. The procedure solving this system is described, the basic parameters determining the development of the chain reaction are found and its specific time intervals are determined. The initial stage of the reaction is analysed and criteria for the development of the branching chain decomposition reaction of iodide in the COIL active medium are determined. (active media)

Enhancing the efficiency of polymerase chain reaction using graphene nanoflakes.

Science.gov (United States)

Abdul Khaliq, R; Kafafy, Raed; Salleh, Hamzah Mohd; Faris, Waleed Fekry

2012-11-16

The effect of the recently developed graphene nanoflakes (GNFs) on the polymerase chain reaction (PCR) has been investigated in this paper. The rationale behind the use of GNFs is their unique physical and thermal properties. Experiments show that GNFs can enhance the thermal conductivity of base fluids and results also revealed that GNFs are a potential enhancer of PCR efficiency; moreover, the PCR enhancements are strongly dependent on GNF concentration. It was found that GNFs yield DNA product equivalent to positive control with up to 65% reduction in the PCR cycles. It was also observed that the PCR yield is dependent on the GNF size, wherein the surface area increases and augments thermal conductivity. Computational fluid dynamics (CFD) simulations were performed to analyze the heat transfer through the PCR tube model in the presence and absence of GNFs. The results suggest that the superior thermal conductivity effect of GNFs may be the main cause of the PCR enhancement.

Biodiesel production from triolein and short chain alcohols through biocatalysis.

Science.gov (United States)

Salis, Andrea; Pinna, Marcella; Monduzzi, Maura; Solinas, Vincenzo

2005-09-29

Oleic acid alkyl esters (biodiesel) were synthesised by biocatalysis in solvent-free conditions. Different commercial immobilised lipases, namely Candida antarctica B, Rizhomucor miehei, and Pseudomonas cepacia, were tested towards the reaction between triolein and butanol to produce butyl oleate. Pseudomonas cepacia lipase resulted to be the most active enzyme reaching 100% of conversion after 6h. Different operative conditions such as reaction temperature, water activity, and reagent stoichiometric ratio were investigated and optimised. These conditions were then used to investigate the effect of linear and branched short chain alcohols. Methanol and 2-butanol were the worst alcohols: the former, probably, due to its low miscibility with the oil and the latter because secondary alcohols usually are less reactive than primary alcohols. Conversely, linear and branched primary alcohols with short alkyl chains (C(2)--C(4)) showed high reaction rate and conversion. A mixture of linear and branched short chain alcohols that mimics the residual of ethanol distillation (fusel oil) was successfully used for oleic acid ester synthesis. These compounds are important in biodiesel mixtures since they improve low temperature properties.

Detection and RFLP Analysis of Canine Parvovirus (CPV) DNA by Polymerase Chain Reaction (PCR) in a Dog

OpenAIRE

ÖZKUL, Aykut

2002-01-01

In this study, the detection of canine parvovirus (CPV) in a fecal sample from a dog with enteritis was performed for the first time using the polymerase chain reaction (PCR) in Turkey. The final PCR product was analyzed using the restriction fragment length polymorphysm (RFLP) technique. RFLP analysis using Apa LI and Eco RV restriction endonucleases revealed homology in the nucleotide sequence in at least the VP2 coding region of the virus DNAs detected in the fecal specimen and prepared fr...

Real-time TaqMan polymerase chain reaction to quantify the effects ...

African Journals Online (AJOL)

TaqMan polymerase chain reaction was developed to quantify the number of Bifidobacterium. We used this assay to detect genomic DNA of Bifidobacterium in the intestinal tract digesta of piglets, including duodenum, jejunum, ileum, cecum and colon. Our results indicated that, developed new real-time quantitative PCR ...

Designing Polymerase Chain Reaction (PCR) Primer Multiplexes in the Forensic Laboratory

Science.gov (United States)

Elkins, Kelly M.

2011-01-01

The polymerase chain reaction (PCR) is a common experiment in upper-level undergraduate biochemistry, molecular biology, and forensic laboratory courses as reagents and thermocyclers have become more affordable for institutions. Typically, instructors design PCR primers to amplify the region of interest and the students prepare their samples for…

Evaluation of urogenital Chlamydia trachomatis infections by cell culture and the polymerase chain reaction using a closed system

DEFF Research Database (Denmark)

Østergaard, Lars; Traulsen, J; Birkelund, Svend

1991-01-01

the two test systems were compared, the overall sensitivity of the polymerase chain reaction was 96% and the specificity 94% when compared to the cell culture technique. By use of a closed system for DNA extraction and sample transfer for the polymerase chain reaction, contamination of the samples......Two hundred and fifty-four specimens from males and females consulting a clinic for sexually transmitted diseases were analyzed for genital Chlamydia trachomatis infection. Each clinical sample was tested by the cell culture technique and the polymerase chain reaction using a closed system. When...... not detect Chlamydia trachomatis after sufficient antibiotic treatment of the chlamydial infections....

Evaluation of urogenital Chlamydia trachomatis infections by cell culture and the polymerase chain reaction using a closed system

DEFF Research Database (Denmark)

Østergaard, Lars; Traulsen, J; Birkelund, Svend

1993-01-01

the two test systems were compared, the overall sensitivity of the polymerase chain reaction was 96% and the specificity 94% when compared to the cell culture technique. By use of a closed system for DNA extraction and sample transfer for the polymerase chain reaction, contamination of the samples......Two hundred and fifty-four specimens from males and females consulting a clinic for sexually transmitted diseases were analyzed for genital Chlamydia trachomatis infection. Each clinical sample was tested by the cell culture technique and the polymerase chain reaction using a closed system. When...... not detect Chlamydia trachomatis after sufficient antibiotic treatment of the chlamydial infections....

Mathematical supply-chain modelling: Product analysis of cost and time

International Nuclear Information System (INIS)

Easters, D J

2014-01-01

Establishing a mathematical supply-chain model is a proposition that has received attention due to its inherent benefits of evolving global supply-chain efficiencies. This paper discusses the prevailing relationships found within apparel supply-chain environments, and contemplates the complex issues indicated for constituting a mathematical model. Principal results identified within the data suggest, that the multifarious nature of global supply-chain activities require a degree of simplification in order to fully dilate the necessary factors which affect, each sub-section of the chain. Subsequently, the research findings allowed the division of supply-chain components into sub-sections, which amassed a coherent method of product development activity. Concurrently, the supply-chain model was found to allow systematic mathematical formulae analysis, of cost and time, within the multiple contexts of each subsection encountered. The paper indicates the supply-chain model structure, the mathematics, and considers how product analysis of cost and time can improve the comprehension of product lifecycle management

Mathematical supply-chain modelling: Product analysis of cost and time

Science.gov (United States)

Easters, D. J.

2014-03-01

Establishing a mathematical supply-chain model is a proposition that has received attention due to its inherent benefits of evolving global supply-chain efficiencies. This paper discusses the prevailing relationships found within apparel supply-chain environments, and contemplates the complex issues indicated for constituting a mathematical model. Principal results identified within the data suggest, that the multifarious nature of global supply-chain activities require a degree of simplification in order to fully dilate the necessary factors which affect, each sub-section of the chain. Subsequently, the research findings allowed the division of supply-chain components into sub-sections, which amassed a coherent method of product development activity. Concurrently, the supply-chain model was found to allow systematic mathematical formulae analysis, of cost and time, within the multiple contexts of each subsection encountered. The paper indicates the supply-chain model structure, the mathematics, and considers how product analysis of cost and time can improve the comprehension of product lifecycle management.

The effect of composition of mixture on rate of radiation initiation of chain reactions

International Nuclear Information System (INIS)

Poluehktov, V.A.; Begishev, I.R.; Podkhalyuzin, A.T.; Babkina, Eh.I.; Morozov, V.A.; Shapovalov, V.V.

1977-01-01

The effect of the composition of starting components on the rate of a number of chain liquid-phase reactions initiated by γ-quanta of Co 60 has been investigated at constant temperature and dosage rate. In regard to 1,1-difluoroethane chlorination, cyclohexene phosphorylation and adamantane alkylation with hexafluoropropylene reactions, abnormal effect of the reagent compositions on reaction rates has been discovered. The possible radical - starting molecule complexing reaction and molecular complexing from the starting components have been considered

Rapid Detection of Salmonella in Food and Beverage Samples by Polymerase Chain Reaction

Directory of Open Access Journals (Sweden)

Radji, M.

2010-01-01

Full Text Available Polymerase chain reaction (PCR assay had been used to detect Salmonella in food and beverage samples using suitable primers which are based on specific invA gene of Salmonella. Twenty nine samples were collected from street food counters and some canteens in Margonda Street, Depok, West Java, Indonesia. It was found that five of twenty nine samples were detected to contain Salmonella and showed the presence of the amplified product of the size 244 bp. The method of PCR demonstrated the specificity of invA primers for detection of Salmonella as confirmed by biochemical and serological assay. The results of this study revealed that PCR was a rapid and useful tool for detection of Salmonella in food and beverage samples.

On the implementation of a chain nuclear reaction of thermonuclear fusion on the basis of the p+11B process

Science.gov (United States)

Belyaev, V. S.; Krainov, V. P.; Zagreev, B. V.; Matafonov, A. P.

2015-07-01

Various theoretical and experimental schemes for implementing a thermonuclear reactor on the basis of the p+11B reaction are considered. They include beam collisions, fusion in degenerate plasmas, ignition upon plasma acceleration by ponderomotive forces, and the irradiation of a solid-state target from 11B with a proton beam under conditions of a Coulomb explosion of hydrogen microdrops. The possibility of employing ultra-short high-intensity laser pulses to initiate the p+11B reaction under conditions far from thermodynamic equilibrium is discussed. This and some other weakly radioactive thermonuclear reactions are promising owing to their ecological cleanness—there are virtually no neutrons among fusion products. Nuclear reactions that follow the p+11B reaction may generate high-energy protons, sustaining a chain reaction, and this is an advantage of the p+11B option. The approach used also makes it possible to study nuclear reactions under conditions close to those in the early Universe or in the interior of stars.

Polymerase chain reaction and conventional DNA tests in detection of HPV DNA in cytologically normal and abnormal cervical scrapes

DEFF Research Database (Denmark)

Kalia, A.; Jalava, T.; Nieminen, P.

1992-01-01

Med.mikrobiologi, polymerase chain reaction, DNA tests, human papillomavirus (HPV), cervical smear, hybridisation, cytologi, affiProbe HPV test, ViraType test......Med.mikrobiologi, polymerase chain reaction, DNA tests, human papillomavirus (HPV), cervical smear, hybridisation, cytologi, affiProbe HPV test, ViraType test...

Case Report:False-negative HIV-1 polymerase chain reaction in a ...

African Journals Online (AJOL)

Polymerase chain reaction (PCR) testing is the gold standard for determining the HIV status in children <18 months of age. However, when clinical manifestations are not consistent with laboratory results, additional investigation is required. We report a 15-month-old HIV-exposed boy referred to our hospital after he had ...

Quantitative Tetraplex Real-Time Polymerase Chain Reaction Assay with TaqMan Probes Discriminates Cattle, Buffalo, and Porcine Materials in Food Chain.

Science.gov (United States)

Hossain, M A Motalib; Ali, Md Eaqub; Sultana, Sharmin; Asing; Bonny, Sharmin Quazi; Kader, Md Abdul; Rahman, M Aminur

2017-05-17

Cattle, buffalo, and porcine materials are widely adulterated, and their quantification might safeguard health, religious, economic, and social sanctity. Recently, conventional polymerase chain reaction (PCR) and PCR-restriction fragment length polymorphism (RFLP) assays have been documented but they are just suitable for identification, cannot quantify adulterations. We described here a quantitative tetraplex real-time PCR assay with TaqMan Probes to quantify contributions from cattle, buffalo, and porcine materials simultaneously. Amplicon-sizes were very short (106-, 90-, and 146-bp for cattle, buffalo, and porcine) because longer targets could be broken down, bringing serious ambiguity in molecular diagnostics. False negative detection was eliminated through an endogenous control (141-bp site of eukaryotic 18S rRNA). Analysis of 27 frankfurters and 27 meatballs reflected 84-115% target recovery at 0.1-10% adulterations. Finally, a test of 36 commercial products revealed 71% beef frankfurters, 100% meatballs, and 85% burgers contained buffalo adulteration, but no porcine was found in beef products.

Production planning and control of closed-loop supply chains

NARCIS (Netherlands)

K. Inderfurth (Karl); R.H. Teunter (Ruud)

2001-01-01

textabstractMore and more supply chains emerge that include a return flow of materials. Many original equipment manufacturers are nowadays engaged in the remanufacturing business. In many process industries, production defectives and by-products are reworked. These closed-loop supply chains deserve

Amplification of nonspecific products in quantitative polymerase chain reactions (qPCR

Directory of Open Access Journals (Sweden)

Adrián Ruiz-Villalba

2017-12-01

Full Text Available Quantitative PCR allows the precise measurement of DNA concentrations and is generally considered to be straightforward and trouble free. However, a survey with 93 validated assays for genes in the Wnt-pathway showed that the amplification of nonspecific products occurs frequently and is unrelated to Cq or PCR efficiency values. Titration experiments showed that the occurrence of low and high melting temperature artifacts was shown to be determined by annealing temperature, primer concentration and cDNA input. To explore the range of input variations that occur in the normal use of the Cre assay these conditions were mimicked in a complete two-way design of template −plasmid DNA- and non-template −mouse cDNA- concentrations. These experiments showed that the frequency of the amplification of the correct product and the artifact, as well as the valid quantification of the correct product, depended on the concentration of the non-template cDNA. This finding questions the interpretation of dilution series in which template as well as non-template concentrations are simultaneously decreasing. Repetition of this cDNA concentration experiment with other templates revealed that exact reproduction qPCR experiments was affected by the time it takes to complete the pipetting of a qPCR plate. Long bench times were observed to lead to significantly more artifacts. However, the measurement of artifact-associated fluorescence can be avoided by inclusion of a small heating step after the elongation phase in the amplification protocol. Taken together, this trouble-shooting journey showed that reliability and reproducibility of qPCR experiments not only depends on standardization and reporting of the biochemistry and technical aspects but also on hitherto neglected factors as sample dilution and waiting times in the laboratory work flow. Keywords: RT-qPCR, Melting curve analysis, Reaction parameters, Artifacts

Impact of Fungicide Residues on Polymerase Chain Reaction and on Yeast Metabolism

Directory of Open Access Journals (Sweden)

Gildo Almeida da Silva

Full Text Available ABSTRACT The indiscriminate use of pesticides on grape crops is harmful for consumers´ healthin “in natura” consumption and in the ingestion of wine and grape juice. During winemaking, a rapid and efficient fermentation stage is critical to avoid proliferation of contaminating microorganisms and to guarantee the product´s quality. Polymerase chain reaction (PCR has the advantage of detecting these contaminants in the early stages of fermentation. However,this enzymatic reaction may also be susceptible to specific problems, reducing its efficiency. Agricultural practices, such as fungicide treatments, may be a source of PCR inhibiting factors and may also interfere in the normal course of fermentation.The action of the pesticides captan and folpet on PCR and on yeast metabolism was evaluated, once these phthalimide compounds are widely employed in Brazilian vineyards. DNA amplification was only observed at 75 and 37.5 µg/mL of captan concentrations, whereas with folpet, amplification was observed only in the two lowest concentrations tested (42.2 and 21.1µg/mL.Besides the strong inhibition on Taq polymerase activity, phthalimides also inhibited yeast metabolism at all concentrations analyzed.Grape must containing captan and folpet residues could not be transformed into wine due to stuck fermentation caused by the inhibition of yeast metabolism. Non-compliance with the waiting period for phthalimide fungicides may result in financial liabilities to the viticulture sector.The use of yeasts with high fungicide sensitivity should be selected for must fermentation as a strategy for sustainable wine production and to assure that products comply with health and food safety standards.

Polymerase chain reaction for detection of Mycobacterium leprae in nasal swab specimens

NARCIS (Netherlands)

de Wit, M. Y.; Douglas, J. T.; McFadden, J.; Klatser, P. R.

1993-01-01

The polymerase chain reaction based on the selective amplification of a 531-bp fragment of the gene encoding the proline-rich antigen of Mycobacterium leprae was applied to nasal swab specimens from leprosy patients, occupational contacts, and endemic and nonendemic controls. To prevent

Molecularly imprinted nanoparticles for inhibiting ribonuclease in reverse transcriptase polymerase chain reaction

DEFF Research Database (Denmark)

Feng, Xiaotong; Ashley, Jon; Zhou, Tongchang

2018-01-01

Molecularly imprinted nanoparticles (nanoMIPs) are synthesized via a solid-phase approach using RNase as the template. The feasibility of employing the nanoMIPs as RNase inhibitor is successfully demonstrated in reverse transcriptase polymerase chain reaction (RT-PCR) assays, suggesting the tailor...

The impact of new product introduction on supply chain ability to ...

African Journals Online (AJOL)

Supply chain managers should redesign their supply chains in response to the introduction of a new product. In particular, to reach performance targets, they should align the supply chain to the new product features. The objective of this paper is to highlight the negative effects of mis-alignment between product features and ...

Polymerase chain reaction assay for detection of Staphylococcus aureus in buffalo milk

Directory of Open Access Journals (Sweden)

V.K. Jain

2010-02-01

Full Text Available In India, Haryana has the world’s best dairy type buffalo, the Murrah capable of milk yields as high as 35 kg a day. Clinical and Sub clinical mastitis exerts a negative impact on milk quality, quantity and animal health and profits. In India, Staphylococci are the main causative agents responsible for mastitis of economic importance. Therefore, a suitable and specific test is required for the rapid diagnosis of Staphylococcus aureus. For definitive diagnosis of Staphylococcus aureus in mastitic milk, a polymerase chain reaction assay was developed using target sequence of 16S to 23S rRNA spacer region. This test can be performed within hours and avoids cumbersome and lengthy steps involved in microbiological culture of milk and biochemical tests. Polymerase chain reaction assay can be used as a screening test for a large herd to detect Staphylococcus aureus in milk.

Polymerase chain reaction in unilateral cases of presumed viral anterior uveitis.

Science.gov (United States)

Shoughy, Samir S; Alkatan, Hind M; Al-Abdullah, Abdulelah A; El-Khani, Albarah; de Groot-Mijnes, Jolanda Df; Tabbara, Khalid F

2015-01-01

Anterior uveitis is the most common form of intraocular inflammation. The main aim of this study was to determine the viral etiology in patients with unilateral cases of anterior uveitis. A total of 12 consecutive patients with the diagnosis of idiopathic unilateral anterior uveitis were included prospectively. Aqueous specimens were obtained from each patient by anterior chamber paracentesis and subjected to the detection of viral DNA/RNA genome by polymerase chain reaction assay for herpes simplex virus, varicella zoster virus, cytomegalovirus, Epstein-Barr virus, and rubella virus. There were six male and six female patients. The mean age was 43 years, with an age range of 11-82 years. All 12 cases presented with unilateral anterior uveitis. In four (33%) patients, polymerase chain reaction was positive for viral genome. Two patients were positive for herpes simplex virus type 1, one patient was positive for cytomegalovirus and one for Epstein-Barr virus. Recent molecular diagnostic assays would help in the identification of the causative agent in patients with unilateral anterior uveitis.

The insurability of product recall in food supply chains

NARCIS (Netherlands)

Meuwissen, M.P.M.; Valeeva, N.I.; Velthuis, A.G.J.; Huirne, R.B.M.

2006-01-01

Insurers face growing difficulties with insuring food-related risks among others due to an increasing number of product recalls and an increasing amount of claims being pushed back into the chain. This paper focuses on the risk of product recall in dairy supply chains. The paper aims at providing

Value chain analysis on cassava and cassava based - products in ...

African Journals Online (AJOL)

This study examined the value Chain analysis (production process and cost related to each element of production chain to add value) on cassava and cassava products in Imo State specifically to ascertain the farm size holdings of the respondents as well as the ownerships of the land used for production. It also identified` ...

Pathogen detection by the polymerase chain reaction

Energy Technology Data Exchange (ETDEWEB)

Chitpatima, S T; Settachan, D; Pornsilpatip, J; Visawapoka, U [Pramongkutklao College of Medicine, Bangkok (Thailand). Molecular Biology Lab.; Dvorak, D R [Amersham International Ltd., Singapore (Singapore)

1994-05-01

In recent years, significant advances in the knowledge of DNA and its make up have led to the development of a powerful technique called polymerase chain reaction (PCR). Since the advent of PCR, laboratories around the globe have been exploiting this technology to bridge limitations or to overcome common problems encountered in molecular biology techniques. In addition, this technology has been employed successfully in diagnostic and basic scientific research and development. The true potentials of this technology is realized in early detection of pathogens and genetic abnormalities. In this paper two PCR protocols are described. The first is for detection of HIV-1 DNA in blood, the other for detection of rabies virus RNA in brain cells. 6 refs, 3 figs, 1 tab.

On fusion/fission chain reactions in the Fleischmann-Pons cold fusion experiment

International Nuclear Information System (INIS)

Anghaie, S.; Froelich, P.; Monkhorst, H.J.

1990-01-01

In this paper the possibility of fusion/fission chain reactions following d-d source reactions in electrochemical cold fusion experiments have been investigated. The recycling factors for the charged particles in fusion reactions with consumable nuclei deuteron, 6 Li nd 7 Li, are estimated. It is concluded that, based on the established nuclear fusion cross sections and electronic stopping power, the recycling factor is four to five orders of magnitude less than required for close to critical conditions. It is argued that the cross generation of charged particles by neutrons does not play a significant role in this process, even if increased densities at the surface of electrodes do occur

Chosen aspects of evaluation of productive processes on the example of productive chains of gear

OpenAIRE

M. Roszak

2005-01-01

Purpose: The purpose of the study was to present an original approach to evaluation of the real productive chains, including its utilization as a benchmarking method.Design/methodology/approach: In the paper an analysis of value in the productive chains with account of activities based costs was used. The evaluation of the effectivity was made by econometric coefficients.Findings: The paper presents obtained particular results of the analysis of value in the productive chains indicating effec...

Reaction-transport simulations of non-oxidative methane conversion with continuous hydrogen removal: Homogeneous-heterogeneous methane reaction pathways

International Nuclear Information System (INIS)

Li, Lin; Borry, Richard W.; Iglesia, Enrique

2000-01-01

Detailed kinetic-transport models were used to explore thermodynamic and kinetic barriers in the non-oxidative conversion of CH4 via homogeneous and homogeneous-heterogeneous pathways and the effects of continuous hydrogen removal and of catalytic sites on attainable yields of useful C2-C10 products. The homogeneous kinetic model combines separately developed models for low-conversion pyrolysis and for chain growth to form large aromatics and carbon. The H2 formed in the reaction decreases CH4 pyrolysis rates and equilibrium conversions and it favors the formation of lighter products. The removal of H2 along tubular reactors with permeable walls increases reaction rates and equilibrium CH4 conversions. C2-C10 yields reach values greater than 90 percent at intermediate values of dimensionless transport rates (delta=1-10), defined as the ratio hydrogen transport and methane conversion rates. Homogeneous reactions require impractical residence times, even with H2 removal, because of slow initiation and chain transfer rates. The introduction of heterogeneous chain initiation pathways using surface sites that form methyl radicals eliminates the induction period without influencing the homogeneous product distribution. Methane conversion, however, occurs predominately in the chain transfer regime, within which individual transfer steps and the formation of C2 intermediates become limited by thermodynamic constraints. Catalytic sites alone cannot overcome these constraints. Catalytic membrane reactors with continuous H2 removal remove these thermodynamic obstacles and decrease the required residence time. Reaction rates become limited by homogeneous reactions of C2 products to form C6+ aromatics. Higher delta values lead to subsequent conversion of the desired C2-C10 products to larger polynuclear aromatics. We conclude that catalytic methane pyrolysis at the low temperatures required for restricted chain growth and the elimination of thermodynamics constraints via

Evaluation of Neutron Induced Reactions for 32 Fission Products

International Nuclear Information System (INIS)

Kim, Hyeong Il

2007-02-01

Neutron cross sections for 32 fission products were evaluated in the neutron-incident energy range from 10 -5 eV to 20 MeV. The list of fission products consists of the priority materials for several applications, extended to cover complete isotopic chains for three elements. The full list includes 8 individual isotopes, 95 Mo, 101 Ru, 103 Rh, 105 Pd, 109 Ag, 131 Xe, 133 Cs, 141 Pr, and 24 isotopes in complete isotopic chains for Nd (8), Sm (9) and Dy (7). Our evaluation methodology covers both the low energy region and the fast neutron region.In the low energy region, our evaluations are based on the latest data published in the Atlas of Neutron Resonances. This resource was used to infer both the thermal values and the resolved resonance parameters that were validated against the capture resonance integrals. In the unresolved resonance region we performed the additional evaluation by using the averages of the resolved resonances and adjusting them to the experimental data.In the fast neutron region our evaluations are based on the nuclear reaction model code EMPIRE-2.19 validated against the experimental data. EMPIRE is the modular system of codes consisting of many nuclear reaction models, including the spherical and deformed Optical Model, Hauser-Feshbach theory with the width fluctuation correction and complete gamma-ray emission cascade, DWBA, Multi-step Direct and Multi-step Compound models, and several versions of the phenomenological preequilibrium models. The code is equipped with a power full GUI, allowing an easy access to support libraries such as RIPL and CSISRS, the graphical package, as well the utility codes for formatting and checking. In general, in our calculations we used the Reference Input Parameter Library, RIPL, for the initial set model parameters. These parameters were properly adjusted to reproduce the available experimental data taken from the CSISRS library. Our evaluations cover cross sections for almost all reaction channels

Simulation and optimization of agricultural product supply chain system based on Witness

Directory of Open Access Journals (Sweden)

Jiandong Liu

2017-03-01

Full Text Available Researches on agricultural product supply chain have important implications for improving the efficiency of agricultural products circulation, strengthening the construction of agricultural market system, promoting agricultural modernization and solving the three rural issues. Agricultural product supply chain system has begun to be optimized through simulation technique. In this paper, agricultural product supply chain system is reasonably simplified and assumed. A simulation model was developed by using the simulation software Wit-ness to study agricultural product supply chain. Through the analysis of the simulation output data, improvement suggestions were also proposed as follows: improving the organization degree of agricultural products, improving the agricultural products processing, establishing strategic partnership and scientifically developing agricultural products logistics.

The chain re-action

CERN Multimedia

2009-01-01

On 18 March, beam commissioning started in the first ‘link’ of the accelerator chain – LINAC 2. This marks the start of what will be the longest period of beam operations in CERN’s history, with the accelerator complex remaining operational throughout the winter to supply the LHC. The Bulletin finds out what is being done to make sure the whole chain is ready for this historic run.

Polymerase chain reaction for detection of invasive Shigella flexneri in food.

Science.gov (United States)

Lampel, K A; Jagow, J A; Trucksess, M; Hill, W E

1990-06-01

The polymerase chain reaction (PCR) was used to amplify a 760-base-pair (bp) fragment with the 220-kbp invasive plasmids of enteroinvasive Escherichia coli, Shigella flexneri, Shigella dysenteriae, Shigella boydii, and Shigella sonnei as templates. This PCR product was easily detected by agarose gel electrophoresis. A 210-bp AccI-PstI fragment lying within the amplified region was used as a probe in Southern hybridization blots and showed that the PCR-generated product was derived from the invasive plasmid. The application of PCR as a rapid method to detect enteroinvasive bacteria in foods was tested by inoculating lettuce with 10(4) S. flexneri cells per g in shigella broth base. Plasmid DNA was isolated from cultures of inoculated and uninoculated lettuce in broth after 0, 4, and 24 h of incubation. With the PCR, the 760-bp fragment was generated only from lettuce inoculated with S. flexneri, as shown by gel electrophoresis and confirmed both by Southern blotting and by nucleotide sequencing of the amplified region. Because the isolation of plasmid DNA, the performance of PCR, and gel electrophoresis all can be completed in 6 to 7 h, invasive enteric bacteria can be detected in less than 1 day.

Effective use of product quality information in food supply chain logistics

OpenAIRE

Rijpkema, W.A.

2014-01-01

Food supply chains have inherent characteristics, such as variability in product quality and quality decay, which put specific demands on logistics decision making. Furthermore, food supply chain organization and control has changed significantly in the past decades by factors such as scale intensification and globalization. In practice, these characteristics and developments frequently lead to supply chain problems, such as high levels of product waste, product quality problems, and high lo...

Optimising product recycling chains by control theory

NARCIS (Netherlands)

Kleineidam, U.; Lambert, A.J.D.; Blansjaar, J.; Kok, J.J.; Heijningen, van R.J.J.

2000-01-01

In this paper, a modelling method is described for production chains including recycling. It consists of elementary models of standard production operations, connected by market modules. The models are analysed using methods from control theory. These methods allow us to investigate essential

Economic modelling of pork production-marketing chains

NARCIS (Netherlands)

Ouden, den M.

1996-01-01

The research described in this thesis was focused on the development of economic simulation and optimization computer models to support decision making with respect to pork production- marketing chains. The models include three production stages: pig farrowing, pig fattening and pig slaughtering

False-negative HIV-1 polymerase chain reaction in a 15-month-old ...

African Journals Online (AJOL)

Corresponding author: S Korsman (stephen.korsman@nhls.ac.za). Polymerase chain reaction (PCR) testing is the gold standard for determining the HIV status in children <18 months of age. ... mismatches relative to the consensus are shown as coloured blocks. Nucleic acid numbering relative to consensus C gag p24 is ...

Detection of clonal immunoglobulin heavy chain gene rearrangements by the polymerase chain reaction and capillary gel electrophoresis.

Science.gov (United States)

Fan, Hongxin; Robetorye, Ryan S

2013-01-01

Although well-established diagnostic criteria exist for mature B-cell neoplasms, a definitive diagnosis of a B-cell lymphoproliferative disorder cannot always be obtained using more conventional techniques such as flow cytometric immunophenotyping, conventional cytogenetics, fluorescence in situ hybridization, or immunohistochemistry. However, because B-cell malignancies contain identically rearranged immunoglobulin heavy chain genes, the polymerase chain reaction (PCR) can be a fast, convenient, and dependable option to identify clonal B-cell processes. This chapter describes the use of PCR and capillary electrophoresis to identify clonal immunoglobulin heavy chain (IGH) variable and joining region (VH-JH) gene rearrangements (IGH VH-JH PCR) using a commercially available method employing multiple multiplex PCR tubes that was originally developed as the result of a large European BIOMED-2 collaborative study (Invivoscribe Technologies). The core protocol involves the use of three separate master mix tubes that target the conserved framework (FR1, FR2, and FR3) and joining (J) regions of the IGH gene. Analysis of these three framework regions can detect approximately 88% of clonal IGH gene rearrangements.

The Cold Chain Logistics for Perishable Agricultural Products in China

OpenAIRE

Hou Yanfang; Xie Dong; Wang Jianbo

2015-01-01

This study introduces concepts of the agricultural product cold chain logistics and domestic and international researches. Also, the study discusses issues of Chinese agricultural cold chain logistics in the development process as the following aspects: the dividing of cold chain logistics market, refrigeration hardware facilities, third-party cold chain logistics development, the level of cold chain technologies, cold chain logistics professionals and the legal system and the standard system...

Quality Measurement in the Wood Products Supply Chain

OpenAIRE

Espinoza, Omar Alejandro

2009-01-01

The purpose of this research is to learn about quality measurement practices in a wood products supply chain. According to the Supply Chain Management paradigm, companies no longer compete as individual entities, but as part of complex networks of suppliers and customers, linked together by flows of materials and information. Evidence suggests that a high degree of integration between supply chain members is essential to achieve superior market and financial performance. This study investigat...

Reaction mechanisms in the radiolysis of peptides, polypeptides and proteins II reactions at side-chain loci in model systems

International Nuclear Information System (INIS)

Garrison, W.M.

1983-11-01

The major emphasis in radiation biology at the molecular level has been on the nucleic acid component of the nucleic acid-protein complex because of its primary genetic importance. But there is increasing evidence that radiation damage to the protein component also has important biological implications. Damage to capsid protein now appears to be a major factor in the radiation inactivation of phage and other viruses. And, there is increasing evidence that radiation-chemical change in the protein component of chromation leads to changes in the stability of the repressor-operator complexes involved in gene expression. Knowledge of the radiation chemistry of protein is also of importance in other fields such as the application of radiation sterilization to foods and drugs. Recent findings that a class of compounds, the α,α'-diaminodicarboxylic acids, not normally present in food proteins, are formed in protein radiolysis is of particular significance since certain of their peptide derivatives have been showing to exhibit immunological activity. The purpose of this review is to bring together and to correlate our present knowledge of products and mechanisms in the radiolysis of peptides, polypeptides and proteins both aqueous and solid-state. In part 1 we presented a discussion of the radiation-induced reactions of the peptide main-chain in model peptide and polypeptide systems. Here in part 2 the emphasis is on the competing radiation chemistry at side-chain loci of peptide derivatives of aliphatic, aromatic-unsaturated and sulfur-containing amino acids in similar systems. Information obtained with the various experimental techniques of product analysis, competition kinetics, spin-trapping, pulse radiolysis, and ESR spectroscopy are included

Kinetics of the Br2-CH3CHO Photochemical Chain Reaction

Science.gov (United States)

Nicovich, J. M.; Shackelford, C. J.; Wine, P. H.

1997-01-01

Time-resolved resonance fluorescence spectroscopy was employed in conjunction with laser flash photolysis of Br2 to study the kinetics of the two elementary steps in the photochemical chain reaction nBr2 + nCH3CHO + hv yields nCH3CBrO + nHBr. In the temperature range 255-400 K, the rate coefficient for the reaction Br((sup 2)P(sub 3/2)) + CH3CHO yields CH3CO + HBr is given by the Arrhenius expression k(sub 6)(T) = (1.51 +/- 0.20) x 10(exp -11) exp(-(364 +/- 41)/T)cu cm/(molecule.s). At 298 K, the reaction CH3CO + Br2 yields CH3CBrO + Br proceeds at a near gas kinetic rate, k(sub 7)(298 K) = (1.08 +/- 0.38) x 10(exp -10)cu cm/(molecule.s).

Cooperation Between Suppliers and Retail Chains in Developing Systemic Products

Directory of Open Access Journals (Sweden)

Katarzyna Bilińska-Reformat

2016-01-01

Full Text Available Seeking a competitive advantage, retail chains develop systemic products. Introducing systemic products to retailers' offer requires establishment of close cooperation with their suppliers. In the paper the assumption has been made that offering systemic products makes the offer more attractive for customer. It is also reason for development of cooperation between retail chains and suppliers. Selected commercial enterprises were research objects in the study. Analyses included in the paper concern the years between 2009 and 2015. Research methods: critical analysis of the literature, results of own research method concerning cooperation between retail chains and suppliers, and the case research method.

MODESTY, Statistical Reaction Cross-Sections and Particle Spectra in Decay Chain

International Nuclear Information System (INIS)

Mattes, W.

1977-01-01

1 - Nature of the physical problem solved: Code MODESTY calculates all energetically possible reaction cross sections and particle spectra within a nuclear decay chain. 2 - Method of solution: It is based on the statistical nuclear model following the method of Uhl (reference 1) where the optical model is used in the calculation of partial widths and the Blatt-Weisskopf single particle model for gamma rays

Rapid Identification of Dengue Virus by Reverse Transcription-Polymerase Chain Reaction Using Field-Deployable Instrumentation

National Research Council Canada - National Science Library

McAvin, James C; Escamilla, Elizabeth M; Blow, James A; Turell, Micahel J; Quintana, Miguel; Bowles, David E; Swaby, James A; Barnes, William J; Huff, William B; Lahman, Kenton L

2005-01-01

...) reverse transcription-polymerase chain reaction assays were developed for screening and seroype identification of infected mosquito vectors and human sera using a field-deployable, fluorometric thermocycler...

A resource efficiency assessment of the industrial mushroom production chain

NARCIS (Netherlands)

Zisopoulos, Filippos K.; Becerra Ramírez, Henry A.; Goot, van der Atze Jan; Boom, Remko M.

2016-01-01

We compare the exergetic performance of a conventional industrial mushroom production chain with a mushroom production chain where part of the compost waste is recycled and reused as raw material. The critical exergy loss points (CEPs) identified are the cooking-out process of the spent mushroom

Gender implications of forest product value chains in the Congo basin

NARCIS (Netherlands)

Ingram, V.; Schure, J.M.; Tieguhong, J.C.; Ndoye, O.; Awono, A.; Iponga, D.M.

2014-01-01

Activities and roles in value chains of forest products in the Congo Basin are highly gendered, varying with the product's characteristics, the segment of the chain and customary regulations and norms. High-value products are primarily male-harvested when customary rules govern tenure and access,

Governance and Upgrading Practices in Cloth Production Value Chain

African Journals Online (AJOL)

This study examines the governance _pal/ern and upgrading _practices of value chain of cloth _production, focusing on micro and small cloth _producing entetprises in Addis Ababa. The study is based on a sample of 222 respondents drawn from various actors of the value chain in the city. The value chain is found out to ...

A polymerase chain reaction strategy for the diagnosis of camelpox.

Science.gov (United States)

Balamurugan, Vinayagamurthy; Bhanuprakash, Veerakyathappa; Hosamani, Madhusudhan; Jayappa, Kallesh Danappa; Venkatesan, Gnanavel; Chauhan, Bina; Singh, Raj Kumar

2009-03-01

Camelpox is a contagious viral skin disease that is mostly seen in young camels. The disease is caused by the Camelpox virus (CMLV). In the present study, a polymerase chain reaction (PCR) assay based on the C18L gene (encoding ankyrin repeat protein) and a duplex PCR based on the C18L and DNA polymerase (DNA pol) genes were developed. The former assay yields a specific amplicon of 243 bp of the C18L gene, whereas the duplex PCR yields 243- and 96-bp products of the C18L and DNA pol genes, respectively, in CMLV, and only a 96-bp product of the DNA pol gene in other orthopoxviruses. The limit of detection was as low as 0.4 ng of viral DNA. Both PCR assays were employed successfully for the direct detection and differentiation of CMLV from other orthopoxviruses, capripoxviruses, and parapoxviruses in both cell culture samples and clinical material. Furthermore, a highly sensitive SYBR Green dye-based, real-time PCR was optimized for quantitation of CMLV DNA. In the standard curve of the quantitative assay, the melting temperature of the specific amplicon at 77.6 degrees C with peak measured fluorescence in dissociation plot was observed with an efficiency of 102%. To the authors' knowledge, this is the first report to describe a C18L gene-based PCR for specific diagnosis of camelpox infection.

Identifikasi Brucella abortus Isolat Lokal dengan Brucella abortus Strain Specific-Polymerase Chain Reaction (IDENTIFICATION OF LOCAL ISOLATES OF BRUCELLA ABORTUS USING BRUCELLA ABORTUS STRAIN SPECIFIC-POLYMERASE CHAIN REACTION ASSAY

Directory of Open Access Journals (Sweden)

Susan Maphilindawati Noor

2014-10-01

Full Text Available Brucella abortus Strain Specific-Polymerase Chain Reaction (BaSS-PCR is a single multiplex PCRtechnique which able to identify and differentiate between Brucella abortus field strains (biovar 1, 2, and4, B. abortus vaccine strains, Brucella species, and non-Brucella species. In this study, BaSS-PCR wasapplied to identify local isolates of B. abortus in order to investigate the B. abortus strains that infectedcattle in Indonesia. Fifty local strains of B.abortus isolated from infected cattle in Java (Jakarta andBandung, South Sulawesi (Maros, East Nusa Tenggara (Kupang and Belu were used in this study. TheDNA bands were observed by agarose gel in the presence of ethidium bromide. Identification was performedbased on the size and number of DNA products amplified by PCR from each isolates. The results showedthat the 50 isolates were of B. abortus field strains. This finding showed that the cause of bovine brucellosisin Indonesia is B. abortus field strains.

PARTICULARITIES AND MANAGEMENT OF THE DISTRIBUTION CHAIN FOR FISH AND FISHERY PRODUCTS

Directory of Open Access Journals (Sweden)

Carmen Georgeta NICOLAE

2015-10-01

Full Text Available The total quality principles implementation contributes to the improving in meeting the consumer needs, essential reduction of costs and increasing sales. The total quality is a concept that assures the total satisfaction of clients on the entire distribution chain, including all the actors in this chain. The aquaculture and fisheries are very diverse sectors which use different breeding and fishing technologies and provide a wide variety of specific products. This induces a real complexity of the supply and distribution chain for fish and fishery products, including the links from the production point (fishery or farm to the final consumer. The components of the distribution chain differ with the geographic areas, type of farms, transportation, information on the fishery market and management systems. Implementing the total food quality system for fishery products involves the quality specification in all marketing stages for all products, along the entire distribution chain. The present work was focused on identifying the distribution chain for fish and fishery products with the identification of the specificity of this type of chain form farm to end consumer, which is the first step in the implementation of total quality concept in aquaculture, with all the benefits that come with it.

Effective sourcing strategies for perishable product supply chains

NARCIS (Netherlands)

Rijpkema, W.A.; Rossi, R.; Vorst, van der J.G.A.J.

2014-01-01

Purpose – The purpose of this paper is to assess whether an existing sourcing strategy can effectively supply products of appropriate quality with acceptable levels of product waste if applied to an international perishable product supply chain. The authors also analyse whether the effectiveness of

Production and decay of the heaviest odd-Z nuclei in the 249Bk + 48Ca reaction

International Nuclear Information System (INIS)

Oganessian, Yu Ts; Abdullin, F Sh; Dmitriev, S N; Itkis, M G; Polyakov, A N; Alexander, C; Binder, J; Boll, R A; Ezold, J; Felker, K; Grzywacz, R K; Miernik, K; Roberto, J B; Gostic, J M; Henderson, R A; Moody, K J; Hamilton, J H; Ramayya, A V; Miller, D; Ryabinin, M A

2015-01-01

The reaction of 249 Bk with 48 Ca has been investigated with an aim of synthesizing and studying the decay properties of isotopes of the new element 117. The experiments were performed at five projectile energies (in two runs, in 2009-2010 and 2012) and with a total beam dose of 48 Ca ions of about 9x10 19 The experiments yielded data on a-decay characteristics and excitation functions of the produced nuclei that establish these to be 293 117 and 294 117 – the products of the 4n- and 3n-evaporation channels, respectively. In total, we have observed 20 decay chains of Z=117 nuclides. The cross sections were measured to be 1.1 pb for the 3n and 2.4 pb for the 4n-reaction channel. The new 289 115 events, populated by α decay of 117, demonstrate the same decay properties as those observed for 115 produced in the 243 Am( 48 Ca,2n) reaction thus providing cross-bombardment evidence. In addition, a single decay of 294 118 was observed from the reaction with 249 Cf – a result of the in-growth of 249 Cf in the 249 Bk target. The observed decay chain of 294 118 is in good agreement with decay properties obtained in 2002-2005 in the experiments with the reaction 249 Cf( 48 Ca,3n) 294 118. The energies and half-lives of the odd-Z isotopes observed in the 117 decay chains together with the results obtained for lower-Z superheavy nuclei demonstrate enhancement of nuclear stability with increasing neutron number towards the predicted new magic number N=184

Development of a multiplex polymerase chain reaction-sequence-specific primer method for NKG2D and NKG2F single-nucleotide polymorphism typing using isothermal multiple displacement amplification products.

Science.gov (United States)

Kaewmanee, M; Phoksawat, W; Romphruk, A; Romphruk, A V; Jumnainsong, A; Leelayuwat, C

2013-06-01

Natural killer group 2 member D (NKG2D) on immune effector cells recognizes multiple stress-inducible ligands. NKG2D single-nucleotide polymorphism (SNP) haplotypes were related to the levels of cytotoxic activity of peripheral blood mononuclear cells. Indeed, these polymorphisms were also located in NKG2F. Isothermal multiple displacement amplification (IMDA) is used for whole genome amplification (WGA) that can amplify very small genomic DNA templates into microgram with whole genome coverage. This is particularly useful in the cases of limited amount of valuable DNA samples requiring multi-locus genotyping. In this study, we evaluated the quality and applicability of IMDA to genetic studies in terms of sensitivity, efficiency of IMDA re-amplification and stability of IMDA products. The smallest amount of DNA to be effectively amplified by IMDA was 200 pg yielding final DNA of approximately 16 µg within 1.5 h. IMDA could be re-amplified only once (second round of amplification), and could be kept for 5 months at 4°C and more than a year at -20°C without loosing genome coverage. The amplified products were used successfully to setup a multiplex polymerase chain reaction-sequence-specific primer for SNP typing of the NKG2D/F genes. The NKG2D/F multiplex polymerase chain reaction (PCR) contained six PCR mixtures for detecting 10 selected SNPs, including 8 NKG2D/F SNP haplotypes and 2 additional NKG2D coding SNPs. This typing procedure will be applicable in both clinical and research laboratories. Thus, our data provide useful information and limitations for utilization of genome-wide amplification using IMDA and its application for multiplex NKG2D/F typing. © 2013 John Wiley & Sons Ltd.

Analysis of Product Complexity considering Disruption Cost in Fast Fashion Supply Chain

Directory of Open Access Journals (Sweden)

Shaheen Sardar

2015-01-01

Full Text Available Outsourcing in the textile industry has been playing an important role in the global economy for six decades. Recently, reshoring is an emerging trend due to various complexities involved in supply chain management. As compared with basic textile and apparel products, fast fashion products are complex in their own way. A single assortment contains several new styles, colors, and sizes with unpredictable demand and urgent deadlines. Numerous assortments run simultaneously in the supply chain. For each assortment, the garment manufacturer has to source various types of fabrics and materials from different suppliers and then manufacture the garments to ship within the deadlines. This complexity contributes to supply chain disruption. This paper develops a model to estimate supply chain disruption cost as a function of fast fashion product complexity in the global outsourcing environment. Estimation of disruption cost will help us to increase visibility and eliminate the bottlenecks in supply chain. Model conclusions are used to develop a method to manage the level of product complexity from the global supply chain perspective. Several strategies are proposed to manage the impact of product complexity on supply chain design.

An improved electrochemiluminescence polymerase chain reaction method for highly sensitive detection of plant viruses

International Nuclear Information System (INIS)

Tang Yabing; Xing Da; Zhu Debin; Liu Jinfeng

2007-01-01

Recently, we have reported an electrochemiluminescence polymerase chain reaction (ECL-PCR) method for detection of genetically modified organisms. The ECL-PCR method was further improved in the current study by introducing a multi-purpose nucleic acid sequence that was specific to the tris(bipyridine) ruthenium (TBR) labeled probe, into the 5' terminal of the primers. The method was applied to detect plant viruses. Conserved sequence of the plant viruses was amplified by PCR. The product was hybridized with a biotin labeled probe and a TBR labeled probe. The hybridization product was separated by streptavidin-coated magnetic beads, and detected by measuring the ECL signals of the TBR labeled. Under the optimized conditions, the experiment results show that the detection limit is 50 fmol of PCR products, and the signal-to-noise ratio is in excess of 14.6. The method was used to detect banana streak virus, banana bunchy top virus, and papaya leaf curl virus. The experiment results show that this method could reliably identity viruses infected plant samples. The improved ECL-PCR approach has higher sensitivity and lower cost than previous approach. It can effectively detect the plant viruses with simplicity, stability, and high sensitivity

Functionalized tetrapod-like ZnO nanostructures for plasmid DNA purification, polymerase chain reaction and delivery

International Nuclear Information System (INIS)

Nie Leng; Gao Lizeng; Yan Xiyun; Wang Taihong

2007-01-01

Functionalized tetrapodal ZnO nanostructures are tested in plasmid DNA experiments (1) as a solid-phase adsorbent for plasmid DNA purification (2) as improving reagents in a polymerase chain reaction (PCR) and (3) as novel carriers for gene delivery. The amino-modification, the tetrapod-like shape of the nanostructure and its high biocompatibility all contribute to measurements showing promise for applications. A sol-gel method is used for silica coating and amino-modification. Plasmid DNA is purified through reversible conjugations of amino-modified ZnO tetrapods with DNA. Also, as additional reagents, functionalized tetrapods are shown to improve the amount of PCR product. For transfection, ZnO tetrapods provide some protection against deoxyribonuclease cleavage of plasmid DNA and deliver plasmid DNA into cells with little cytotoxicity

Coordinating Supply Chain Distribution in the Presence of Production Disruption Risks

Directory of Open Access Journals (Sweden)

Xuanguo Xu

2010-09-01

Full Text Available With the impacts of unexpected events, production processes of supply chain system may be forced to interrupt in a certain period, which may decrease the supply capacity of manufacturer to its retailers. This paper discusses methods to distribute the limited stock in case the production disruptions occur. To ascertain a reasonable replenish sequence and quantity after the production disruption, a production disruption-oriented supply chain distribution model is offered, which can be used to minimize the negative impact of production disruption to supply chain system. And then a constraint satisfaction optimization method is established to resolve the model. Finally, validity of the model is verified with an actual application in an air-conditioner factory in China.

Identification of Meat Species by Polymerase Chain Reaction (PCR) Technique

OpenAIRE

İLHAK, O. İrfan; ARSLAN, Ali

2014-01-01

The origin of horse, dog, cat, bovine, sheep, porcine, and goat meat was determined by the polymerase chain reaction (PCR) technique, using species-specific primers. Test mixtures of meat were prepared by adding 5%, 2.5%, 1%, 0.5%, and 0.1% levels of pork, horse, cat, or dog meat to beef, sheep, and goat meat. Samples taken from those combinations were analyzed by PCR for species determination. Mitochondrial DNA (mt DNA) fragments of 439, 322, 274, 271, 225, 212, and 157 bp for horse, dog, ca...

Evaluation of Neutron Induced Reactions for 32 Fission Products

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyeong Il

2007-02-15

Neutron cross sections for 32 fission products were evaluated in the neutron-incident energy range from 10{sup -5} eV to 20 MeV. The list of fission products consists of the priority materials for several applications, extended to cover complete isotopic chains for three elements. The full list includes 8 individual isotopes, {sup 95}Mo, {sup 101}Ru, {sup 103}Rh, {sup 105}Pd, {sup 109}Ag, {sup 131}Xe, {sup 133}Cs, {sup 141}Pr, and 24 isotopes in complete isotopic chains for Nd (8), Sm (9) and Dy (7). Our evaluation methodology covers both the low energy region and the fast neutron region.In the low energy region, our evaluations are based on the latest data published in the Atlas of Neutron Resonances. This resource was used to infer both the thermal values and the resolved resonance parameters that were validated against the capture resonance integrals. In the unresolved resonance region we performed the additional evaluation by using the averages of the resolved resonances and adjusting them to the experimental data.In the fast neutron region our evaluations are based on the nuclear reaction model code EMPIRE-2.19 validated against the experimental data. EMPIRE is the modular system of codes consisting of many nuclear reaction models, including the spherical and deformed Optical Model, Hauser-Feshbach theory with the width fluctuation correction and complete gamma-ray emission cascade, DWBA, Multi-step Direct and Multi-step Compound models, and several versions of the phenomenological preequilibrium models. The code is equipped with a power full GUI, allowing an easy access to support libraries such as RIPL and CSISRS, the graphical package, as well the utility codes for formatting and checking. In general, in our calculations we used the Reference Input Parameter Library, RIPL, for the initial set model parameters. These parameters were properly adjusted to reproduce the available experimental data taken from the CSISRS library. Our evaluations cover cross

Comparison of Nested Polymerase Chain Reaction and Real-Time Polymerase Chain Reaction with Parasitological Methods for Detection of Strongyloides stercoralis in Human Fecal Samples

Science.gov (United States)

Sharifdini, Meysam; Mirhendi, Hossein; Ashrafi, Keyhan; Hosseini, Mostafa; Mohebali, Mehdi; Khodadadi, Hossein; Kia, Eshrat Beigom

2015-01-01

This study was performed to evaluate nested polymerase chain reaction (PCR) and real-time PCR methods for detection of Strongyloides stercoralis in fecal samples compared with parasitological methods. A total of 466 stool samples were examined by conventional parasitological methods (formalin ether concentration [FEC] and agar plate culture [APC]). DNA was extracted using an in-house method, and mitochondrial cytochrome c oxidase subunit 1 and 18S ribosomal genes were amplified by nested PCR and real-time PCR, respectively. Among 466 samples, 12.7% and 18.2% were found infected with S. stercoralis by FEC and APC, respectively. DNA of S. stercoralis was detected in 18.9% and 25.1% of samples by real-time PCR and nested PCR, respectively. Considering parasitological methods as the diagnostic gold standard, the sensitivity and specificity of nested PCR were 100% and 91.6%, respectively, and that of real-time PCR were 84.7% and 95.8%, respectively. However, considering sequence analyzes of the selected nested PCR products, the specificity of nested PCR is increased. In general, molecular methods were superior to parasitological methods. They were more sensitive and more reliable in detection of S. stercoralis in comparison with parasitological methods. Between the two molecular methods, the sensitivity of nested PCR was higher than real-time PCR. PMID:26350449

Early detection of typhoid by polymerase chain reaction

International Nuclear Information System (INIS)

Haque, A.; Qureshi, Javed A.; Ahmed, J.

1999-01-01

Typhoid is a common problem in developing countries. Cultivation ofbacteria and serology (especially Widal test) gives unacceptable levels offalse-negative and false-positive results respectively. In this study, arecently introduced polymerase chain reaction based technique (which has 100%specificity for Salmonella typhi) was compared with blood culture and Widaltest during the first week of illness of 82 suspected cases of typhoid. Therespective figures of positivity for PCR, blood culture and Widal test were71.95%, 34.1% and 36.5%. A control group of 20 healthy persons gave figuresof 0%, 0% and 33.3%, respectively. We conclude that this PCR-based techniqueis not only absolutely specific, but also very sensitive and therefore muchsuperior to blood culture and, Widal test for the early diagnosis of typhoid.(author)

Development of melting temperature-based SYBR Green I polymerase chain reaction methods for multiplex genetically modified organism detection.

Science.gov (United States)

Hernández, Marta; Rodríguez-Lázaro, David; Esteve, Teresa; Prat, Salomé; Pla, Maria

2003-12-15

Commercialization of several genetically modified crops has been approved worldwide to date. Uniplex polymerase chain reaction (PCR)-based methods to identify these different insertion events have been developed, but their use in the analysis of all commercially available genetically modified organisms (GMOs) is becoming progressively insufficient. These methods require a large number of assays to detect all possible GMOs present in the sample and thereby the development of multiplex PCR systems using combined probes and primers targeted to sequences specific to various GMOs is needed for detection of this increasing number of GMOs. Here we report on the development of a multiplex real-time PCR suitable for multiple GMO identification, based on the intercalating dye SYBR Green I and the analysis of the melting curves of the amplified products. Using this method, different amplification products specific for Maximizer 176, Bt11, MON810, and GA21 maize and for GTS 40-3-2 soybean were obtained and identified by their specific Tm. We have combined amplification of these products in a number of multiplex reactions and show the suitability of the methods for identification of GMOs with a sensitivity of 0.1% in duplex reactions. The described methods offer an economic and simple alternative to real-time PCR systems based on sequence-specific probes (i.e., TaqMan chemistry). These methods can be used as selection tests and further optimized for uniplex GMO quantification.

Copy number ratios determined by two digital polymerase chain reaction systems in genetically modified grains

Science.gov (United States)

Pérez Urquiza, M.; Acatzi Silva, A. I.

2014-02-01

Three certified reference materials produced from powdered seeds to measure the copy number ratio sequences of p35S/hmgA in maize containing MON 810 event, p35S/Le1 in soybeans containing GTS 40-3-2 event and DREB1A/acc1 in wheat were produced according to the ISO Guides 34 and 35. In this paper, we report digital polymerase chain reaction (dPCR) protocols, performance parameters and results of copy number ratio content of genetically modified organisms (GMOs) in these materials using two new dPCR systems to detect and quantify molecular deoxyribonucleic acid: the BioMark® (Fluidigm) and the OpenArray® (Life Technologies) systems. These technologies were implemented at the National Institute of Metrology in Mexico (CENAM) and in the Reference Center for GMO Detection from the Ministry of Agriculture (CNRDOGM), respectively. The main advantage of this technique against the more-used quantitative polymerase chain reaction (qPCR) is that it generates an absolute number of target molecules in the sample, without reference to standards or an endogenous control, which is very useful when not much information is available for new developments or there are no standard reference materials in the market as in the wheat case presented, or when it was not possible to test the purity of seeds as in the maize case presented here. Both systems reported enhanced productivity, increased reliability and reduced instrument footprint. In this paper, the performance parameters and uncertainty of measurement obtained with both systems are presented and compared.

Low Energy Nuclear Reaction Products at Surfaces

Science.gov (United States)

Nagel, David J.

2008-03-01

This paper examines the evidence for LENR occurring on or very near to the surface of materials. Several types of experimental indications for LENR surface reactions have been reported and will be reviewed. LENR result in two types of products, energy and the appearance of new elements. The level of instantaneous power production can be written as the product of four factors: (1) the total area of the surface on which the reactions can occur, (2) the fraction of the area that is active at any time, (3) the reaction rate, that is, the number of reactions per unit active area per second, and (4) the energy produced per reaction. Each of these factors, and their limits, are reviewed. A graphical means of relating these four factors over their wide variations has been devised. The instantaneous generation of atoms of new elements can also be written as the product of the first three factors and the new elemental mass produced per reaction. Again, a graphical means of presenting the factors and their results over many orders of magnitude has been developed.

Chain reaction. History of the atomic bomb

International Nuclear Information System (INIS)

Mania, Hubert

2010-01-01

Henri becquerel tracked down in 1896 a strange radiation, which was called radioactivity by Marie Curie. In the following centuries German scientists Max Planck, Albert Einstein and Werner Heisenberg presented fundamental contributions to understand processes in the atomic nucleus. At Goettingen, center of the international nuclear physics community, the American student J. Robert Oppenheimer admit to this physical research. In the beginning of 1939 the message of Otto Hahns' nuclear fission electrified researchers. The first step, unleashing atomic energy, was done. A half year later the Second World War begun. And suddenly being friend with and busily communicating physicians were devided into hostile power blocs as bearers of official secrets. The author tells in this exciting book the story of the first atomic bomb as a chain reaction of ideas, discoveries and visions, of friendships, jealousy and intrigues of scientists, adventurers and genius. (orig./GL)

Radical Abstraction Reactions with Concerted Fragmentation in the Chain Decay of Nitroalkanes

Science.gov (United States)

Denisov, E. T.; Shestakov, A. F.

2018-05-01

Reactions of the type X• + HCR2CH2NO2 → XH + R2C=CH2 + N•O2 are exothermic, due to the breaking of weak C-N bonds and the formation of energy-intensive C=C bonds. Quantum chemistry calculations of the transition state using the reactions of Et• and EtO• with 2-nitrobutane shows that such reactions can be categorized as one-step, due to the extreme instability of the intermediate nitrobutyl radical toward decay with the formation of N•O2. Kinetic parameters that allow us to calculate the energy of activation and rate constant of such a reaction from its enthalpy are estimated using a model of intersecting parabolas. Enthalpies, energies of activation, and rate constants are calculated for a series of reactions with the participation of Et•, EtO•, RO•2, N•O2 radicals on the one hand and a series of nitroalkanes on the other. A new kinetic scheme of the chain decay of nitroalkanes with the participation of abstraction reactions with concerted fragmentation is proposed on the basis of the obtained data.

Reaction mechanisms in the radiolysis of peptides, polypeptides and proteins

International Nuclear Information System (INIS)

Garrison, W.M.

1985-01-01

The purpose of this review is to bring together and to correlate the wide variety of experimental studies that provide information on the reaction products and reaction mechanisms involved in the radiolysis of peptides, polypeptides and proteins (including chromosomal proteins) in both aqueous and solid-state systems. The comparative radiation chemistry of these systems is developed in terms of specific reactions of the peptide main-chain and the aliphatic, aromatic-unsaturated and sulfur-containing side-chains. Information obtained with the various experimental techniques of product analysis, competition kinetics, spin-trapping, pulse radiolysis and ESR spectroscopy is included. 147 refs

Reaction mechanisms in the radiolysis of peptides, polypeptides and proteins

Energy Technology Data Exchange (ETDEWEB)

Garrison, W.M.

1985-01-01

The purpose of this review is to bring together and to correlate the wide variety of experimental studies that provide information on the reaction products and reaction mechanisms involved in the radiolysis of peptides, polypeptides and proteins (including chromosomal proteins) in both aqueous and solid-state systems. The comparative radiation chemistry of these systems is developed in terms of specific reactions of the peptide main-chain and the aliphatic, aromatic-unsaturated and sulfur-containing side-chains. Information obtained with the various experimental techniques of product analysis, competition kinetics, spin-trapping, pulse radiolysis and ESR spectroscopy is included. 147 refs.

Materials-Product chains. Theory and an application to zinc and PVC gutters

Energy Technology Data Exchange (ETDEWEB)

Kandelaars, P.; Van den Bergh, J. [Tinbergen Inst., Rotterdam (Netherlands)

1995-12-31

A framework is presented for the analysis of economic and environmental impacts of policies applied to materials-product (MP) chains. This is based on material flows, product flows, costs, prices and optimal management of an MP chain. The main difference with other studies focusing on materials flows is that in this study the link between products of services and materials is explicitly dealt with. The framework is developed on the basis of materials balance conditions, production functions allowing for substitution, and recycling of both materials and products. After presenting theoretical MP chain-models and analytical results, an application to the problem of choosing between zinc and PVC gutters is discussed. Here optimal MP chain management decisions are presented for various policy and strategy scenarios. 3 figs., 5 tabs., 12 refs., 3 appendices

Polymerase chain reaction detection of Propionibacterium propionicus and Actinomyces radicidentis in primary and persistent endodontic infections.

Science.gov (United States)

Siqueira, José F; Rôças, Isabela N

2003-08-01

Propionibacterium propionicus and the recently described species Actinomyces radicidentis have been isolated from infections of endodontic origin; nevertheless, the possibility exists that their actual prevalence may have been underestimated by culture. The purpose of our study was to assess the occurrence of these 2 species in different types of endodontic infections by using the sensitive 16S rDNA-based nested polymerase chain reaction approach. To detect these 2 species, nested polymerase chain reaction was performed directly in samples taken from primary endodontic infections associated with asymptomatic periradicular lesions, acute apical periodontitis, or acute periradicular abscesses and in samples from patients in whom endodontic therapy had failed. DNA was extracted from the samples and initially amplified by using universal 16S rDNA primers. In the second round of amplification, the first polymerase chain reaction products were used to detect a specific 16S rDNA fragment of either P propionicus or A radicidentis. P propionicus was detected in 6/21 (29%) root canal samples from teeth with chronic periradicular lesions, in 5/10 (50%) cases diagnosed as acute apical periodontitis, and in 7/19 (37%) pus samples aspirated from acute periradicular abscesses. Overall, this species was found in 18/50 (36%) samples taken from primary endodontic infections. Of the root canal samples obtained from root-filled teeth with chronic periradicular lesions, P propionicus was detected in 7/12 (58%) cases. A radicidentis was detected in 1/21 (5%) root canal samples from teeth with chronic periradicular lesions and in 1/10 (10%) cases of acute apical periodontitis. No pus sample yielded this species. In general, A radicidentis was detected in 2/50 (4%) samples taken from primary endodontic infections and in 1/12 (8%) root canal samples taken from patients in whom endodontic treatment had failed. P propionicus was found in a relatively large number of patients with primary and

Eco-efficiency in the production chain of Dutch semi-hard cheese

NARCIS (Netherlands)

Middelaar, van C.E.; Berentsen, P.B.M.; Dolman, M.A.; Boer, de I.J.M.

2011-01-01

To achieve a sustainable cheese production chain, not only its ecological impact must be minimized, but economic value must be added along the chain also. The objectives of this study were to gain insight into ecological hotspots of the cheese chain, and to judge the ecological impact of chain

Sustainable Rent-Based Closed-Loop Supply Chain for Fashion Products

Directory of Open Access Journals (Sweden)

Zhi-Hua Hu

2014-10-01

Full Text Available The textile and clothing industry generates much pollution and consumes a large amount of resources. Improper uses and disposal of clothing products make the problems much more severe. Fast fashion products shorten the valid lifecycle and generate more waste than regular clothing products. Considering the features of fashion products, a system of a rent-based closed-loop supply chain is developed to improve the sustainability of fashion products. The supply chain processes (fashion design and manufacturing, laundry, logistics and disposal, the operations management issues (inventory management, closed-loop logistics, human-clothing matching, booking system and the rental pricing and the sustainability promotion aspects (customization, responsive system, culture and policy aspects are investigated by devising sustainable strategies. The rationalities of the developed system and strategies are reviewed and elucidated in detail. The results may contribute to building sustainable closed-loop fashion supply chains, the related information systems and operational and managerial mechanisms.

Interaction of gold nanoparticles with Pfu DNA polymerase and effect on polymerase chain reaction.

Science.gov (United States)

Sun, L-P; Wang, S; Zhang, Z-W; Ma, Y-Y; Lai, Y-Q; Weng, J; Zhang, Q-Q

2011-03-01

The interaction of gold nanoparticles with Pfu DNA polymerase has been investigated by a number of biological, optical and electronic spectroscopic techniques. Polymerase chain reaction was performed to show gold nanoparticles' biological effect. Ultraviolet-visible and circular dichroism spectra analysis were applied to character the structure of Pfu DNA polymerase after conjugation with gold nanoparticles. X-ray photoelectron spectroscopy was used to investigate the bond properties of the polymerase-gold nanoparticles complex. The authors demonstrate that gold nanoparticles do not affect the amplification efficiency of polymerase chain reaction using Pfu DNA polymerase, and Pfu DNA polymerase displays no significant changes of the secondary structure upon interaction with gold nanoparticles. The adsorption of Pfu DNA polymerase to gold nanoparticles is mainly through Au-NH(2) bond and electrostatic interaction. These findings may have important implications regarding the safety issue as gold nanoparticles are widely used in biomedical applications.

The Determination of Production and Distribution Policy in Push-Pull Production Chain with Supply Hub as the Junction Point

Science.gov (United States)

Sinaga, A. T.; Wangsaputra, R.

2018-03-01

The development of technology causes the needs of products and services become increasingly complex, diverse, and fluctuating. This causes the level of inter-company dependencies within a production chains increased. To be able to compete, efficiency improvements need to be done collaboratively in the production chain network. One of the efforts to increase efficiency is to harmonize production and distribution activities in the production chain network. This paper describes the harmonization of production and distribution activities by applying the use of push-pull system and supply hub in the production chain between two companies. The research methodology begins with conducting empirical and literature studies, formulating research questions, developing mathematical models, conducting trials and analyses, and taking conclusions. The relationship between the two companies is described in the MINLP mathematical model with the total cost of production chain as the objective function. Decisions generated by the mathematical models are the size of production lot, size of delivery lot, number of kanban, frequency of delivery, and the number of understock and overstock lot.

Innovation in a multiple-stage, multiple-product food marketing chain

DEFF Research Database (Denmark)

Baker, Alister Derek; Christensen, Tove

A model of a 3-stage food marketing chain is presented for the case of two products. Its extension of existing work is its capacity to examine non-competitive input and output markets in two marketing chains at once, and have them related by demand and cost interactions. The simulated impacts...... of market power in a single chain generally reproduce those delivered by previous authors. The impacts of market power in related chains are found to depend on linkages between chains in terms of interactions in consumer demand. Interactions between products in costs (economies of scope) generate...... an interesting result in that a possible market failure is identified that may be offset by the exercise of market power. The generation of farm-level innovation is seen to be largely unaffected by market power, but where market power is exercised the benefits are extracted from farmers and consumers...

Stackelberg Game for Product Renewal in Supply Chain

Directory of Open Access Journals (Sweden)

Yong Luo

2013-01-01

Full Text Available The paper studied the process of product renewal in a supply chain, which is composed of one manufacturer and one retailer. There are original product and renewal product in the supply chain. A market share shift model for renewal product was firstly built on a increment function and a shift function. Based on the model, the decision-making plane consisting of two variables was divided into four areas. Since the process of product renewal was divided into two stages, Stackelberg-Nash game model and Stackelberg-merger game model could be built to describe this process. The optimal solutions of product pricing strategy of two games were obtained. The relationships between renewal rate, cost, pricing strategy, and profits were got by numerical simulation. Some insights were obtained from this paper. Higher renewal rate will make participants’ profits and total profit increase at the same margin cost. What is more important, the way of the optimal decision making of the SC was that RP comes onto the market with a great price differential between OP and RP.

Value Chain Structures that Define European Cellulosic Ethanol Production

DEFF Research Database (Denmark)

Gregg, Jay Sterling; Bolwig, Simon; Hansen, Teis

2017-01-01

production plants across Europe from a global value chain (GVC) perspective. We find that most CE production plants in the EU focus largely on intellectual property and are therefore only at the pilot or demonstration scale. Crescentino, the largest CE production facility in Europe, is also more interested...... petroleum markets and higher financial risks. We argue that, to increase CE production, policies should consider value chains, promote the wider bio-economy of products and focus on economies of scope. Whereas the EU and its member states have ethanol quotas and blending targets, a more effective policy......Production of cellulosic ethanol (CE) has not yet reached the scale envisaged by the literature and industry. This study explores CE production in Europe to improve understanding of the motivations and barriers associated with this situation. To do this, we conduct a case study-based analysis of CE...

Molecular relapse in chronic myelogenous leukemia patients after bone marrow transplantation detected by polymerase chain reaction

International Nuclear Information System (INIS)

Sawyers, C.L.; Timson, L.; Clark, S.S.; Witte, O.N.; Champlin, R.; Kawasaki, E.S.

1990-01-01

Relapse of chronic myelogenous leukemia after bone marrow transplantation can be detected by using clinical, cytogenetic, or molecular tools. A modification of the polymerase chain reaction can be used in patients to detect low levels of the BCR-ABL-encoded mRNA transcript, a specific marker for chronic myelogenous leukemia. Early detection of relapse after bone marrow transplantation could potentially alter treatment decisions. The authors prospectively evaluated 19 patients for evidence of molecular relapse, cytogenetic relapse, and clinical relapse after bone marrow transplantation. They used the polymerase chain reaction to detect residual BCR-ABL mRNA in patients followed up to 45 months after treatment and found 4 patients with BCR-ABL mRNA expression following bone marrow transplantation. Fifteen patients did not express detectable BCR-ABL mRNA. All 19 patients remain in clinical remission. In this prospective study of chronic myelogenous leukemia patients treated with bone marrow transplantation, molecular relapse preceded cytogenetic relapse in those patients who persistently express BCR-ABL mRNA. They recommend using standard clinical and cytogenetic testing to make patient care decisions until further follow-up determines the clinical outcome of those patients with residual BCR-ABL mRNA transcripts detected by polymerase chain reaction

Prognostic significance of bi/oligoclonality in childhood acute lymphoblastic leukemia as determined by polymerase chain reaction

Directory of Open Access Journals (Sweden)

Carlos Alberto Scrideli

2001-09-01

Full Text Available CONTEXT: The CDR-3 region of heavy-chain immunoglobulin has been used as a clonal marker in the study of minimal residual disease in children with acute lymphoblastic leukemia. Southern blot and polymerase chain reaction studies have demonstrated the occurrence of bi/oligoclonality in a variable number of cases of B-lineage acute lymphoblastic leukemia, a fact that may strongly interfere with the detection of minimal residual disease. Oligoclonality has also been associated with a poorer prognosis and a higher chance of relapse. OBJECTIVES: To correlate bi/oligoclonality, detected by polymerase chain reaction in Brazilian children with B-lineage acute lymphoblastic leukemia with a chance of relapse, with immunophenotype, risk group, and disease-free survival. DESIGN: Prospective study of patients’ outcome. SETTING: Pediatric Oncology Unit of the University Hospital, Faculty of Medicine of Ribeirão Preto, University of São Paulo. PARTICIPANTS: 47 children with acute lymphoblastic leukemia DIAGNOSTIC TEST: Polymerase chain reaction using consensus primers for the CDR-3 region of heavy chain immunoglobulin (FR3A, LJH and VLJH for the detection of clonality. RESULTS: Bi/oligoclonality was detected in 15 patients (31.9%. There was no significant difference between the groups with monoclonality and biclonality in terms of the occurrence of a relapse (28.1% versus 26.1%, presence of CALLA+ (81.2% versus 80% or risk group (62.5% versus 60%. Disease-free survival was similar in both groups, with no significant difference (p: 0.7695. CONCLUSIONS: We conclude that bi/oligoclonality was not associated with the factors investigated in the present study and that its detection in 31.9% of the patients may be important for the study and monitoring of minimal residual disease.

Sensitive electrochemical monitoring of nucleic acids coupling DNA nanostructures with hybridization chain reaction

International Nuclear Information System (INIS)

Zhuang, Junyang; Fu, Libing; Xu, Mingdi; Yang, Huanghao; Chen, Guonan; Tang, Dianping

2013-01-01

Graphical abstract: -- Highlights: •A new signal-on metallobioassay was developed for detection of nucleic acids. •Target-triggered long-range self-assembled DNA nanostructures are used for amplification of electronic signal. •Hybridization chain reaction is utilized for construction of long-range DNA nanostructures. -- Abstract: Methods based on metal nanotags have been developed for metallobioassay of nucleic acids, but most involve complicated labeling or stripping procedures and are unsuitable for routine use. Herein, we report the proof-of-concept of a novel and label-free metallobioassay for ultrasensitive electronic determination of human immunodeficiency virus (HIV)-related gene fragments at an ultralow concentration based on target-triggered long-range self-assembled DNA nanostructures and DNA-based hybridization chain reaction (HCR). The signal is amplified by silver nanotags on the DNA duplex. The assay mainly consists of capture probe, detection probe, and two different DNA hairpins. In the presence of target DNA, the capture probe immobilized on the sensor sandwiches target DNA with the 3′ end of detection probe. Another exposed part of detection probe at the 5′ end opens two alternating DNA hairpins in turn, and propagates a chain reaction of hybridization events to form a nicked double-helix. Finally, numerous silver nanotags are immobilized onto the long-range DNA nanostructures, each of which produces a strong electronic signal within the applied potentials. Under optimal conditions, the target-triggered long-range DNA nanostructures present good electrochemical behaviors for the detection of HIV DNA at a concentration as low as 0.5 fM. Importantly, the outstanding sensitivity can make this approach a promising scheme for development of next-generation DNA sensors without the need of enzyme labeling or fluorophore labeling

The PO production chain and possibilities for energy saving. Public summary

Energy Technology Data Exchange (ETDEWEB)

Donszelmann, E.; De Buck, A.; Croezen, H.; Wielders, L.

2012-01-15

The Dutch Industry and the Dutch government have made long term agreements on energy efficiency (LEE) for companies that are under the European Trading Scheme (ETS). These companies have to report frequently on their possibilities and achievements in energy efficiency. These reports describe the current state of energy use, the possible measures that can be taken and the measures already taken and their results. LyondellBasell is one of the companies that take part in LEE. Based on the agreements of LEE linked to ETS, companies make an effort to realise a significant energy saving within their business community, and the government supports them by means of process coordination and financing additional studies. Agentschap NL coordinates the governmental support. LyondellBasell asked Agentschap NL for support in assessing their energy efficiency on site and through the chain of its products. CE Delft has been commissioned by Agentschap NL and LyondellBasell to determine the carbon footprint and cumulative energy demand of the two production sites of LyondellBasell in the Rotterdam area. Purpose of the project is to identify energy saving potential within the PO (propylene oxide), Styrene and tert-butyl alcohol production chains. This study also focuses on those options that require cooperation with other companies or yield savings for more than one company within the PO production chains. The project consisted of two pathways. The first assessed the possibilities of energy saving in the supply chain. Both the Maasvlakte and the Botlek site of LyondellBasell were addressed. The second pathway focused on three product chains: Styrene, Polyols and ETBE/MTBE. This report presents the results of the projects second pathway: the product chains.

Specific Identification of Biomphalaria tenagophila and Biomphalaria occidentalis Populations by the Low Stringency Polymerase Chain Reaction

Directory of Open Access Journals (Sweden)

Edina Rodrigues Pires

1997-01-01

Full Text Available Although Biomphalaria occidentalis and B. tenagophila are indistinguishable on the basis of shell morphology and the majority of their genital organs, only the latter is susceptible to infection with Schistosoma mansoni. Thus, the identification of these species is fundamental to epidemiological studies of schistosomiasis. Here we describe a simple and rapid method for differentiating B. tenagophila from B. occidentalis based on low stringency polymerase chain reaction and using a pair of primers specific for the amplification of the 18S rRNA gene. Analysis of the low stringency product profiles of populations of these snails from different geographical regions confirmed this approach as being applicable to the identification of B. tenagophila and B. occidentalis in cases where classical morphology is inconclusive

Detection of adenovirus hexon sequence in a cat by polymerase chain reaction(short communication)

NARCIS (Netherlands)

Horzinek, M.C.; Lakatos, B.; Farkas, J.; Egberink, H.F.; Vennema, H.; Benko, M.

1999-01-01

Adenoviral nucleic acid was detected by polymerase chain reaction (PCR) in pharyngeal and rectal swab samples of a cat seropositive for adenovirus and suffering from transient hepatic failure. The samples were taken at a one-year interval, and both faecal samples as well as the second pharyngeal

High energy gamma-ray production in nuclear reactions

International Nuclear Information System (INIS)

Pinston, J.A.; Nifenecker, H.; Nifenecker, H.

1989-01-01

Experimental techniques used to study high energy gamma-ray production in nuclear reactions are reviewed. High energy photon production in nucleus-nucleus collisions is discussed. Semi-classical descriptions of the nucleus-nucleus gamma reactions are introduced. Nucleon-nucleon gamma cross sections are considered, including theoretical aspects and experimental data. High energy gamma ray production in proton-nucleus reactions is explained. Theoretical explanations of photon emission in nucleus-nucleus collisions are treated. The contribution of charged pion currents to photon production is mentioned

Detection of Listeria monocytogenes in ready-to-eat food by Step One real-time polymerase chain reaction.

Science.gov (United States)

Pochop, Jaroslav; Kačániová, Miroslava; Hleba, Lukáš; Lopasovský, L'ubomír; Bobková, Alica; Zeleňáková, Lucia; Stričík, Michal

2012-01-01

The aim of this study was to follow contamination of ready-to-eat food with Listeria monocytogenes by using the Step One real time polymerase chain reaction (PCR). We used the PrepSEQ Rapid Spin Sample Preparation Kit for isolation of DNA and MicroSEQ® Listeria monocytogenes Detection Kit for the real-time PCR performance. In 30 samples of ready-to-eat milk and meat products without incubation we detected strains of Listeria monocytogenes in five samples (swabs). Internal positive control (IPC) was positive in all samples. Our results indicated that the real-time PCR assay developed in this study could sensitively detect Listeria monocytogenes in ready-to-eat food without incubation.

O2O - Based Agricultural Products Supply Chain Process Integration Optimization Based on Internet +

Directory of Open Access Journals (Sweden)

Li Huijuan

2017-01-01

Full Text Available Traditional wholesale and retail, electricity supplier of agricultural products supply chain have many difficulties. The O2O supply chain of agricultural products of “Internet+”, committed to the integration of online and offline advantage process, has become the main direction of the agricultural products supply chain transformation. Practice operation results show that O2O supply chain can effectively play the advantages of online and offline process integration, but its further development is still subject to the logistics, information flow of the dispersion, fracture and high cost. The integrated optimization of various regions and various enterprises and all sectors of the supply chain process is the key to optimize the process Internet plus era of agricultural products supply chain.

The Impact of Supply Chain Cost on the Price of the Final Product

Directory of Open Access Journals (Sweden)

Indrė Lapinskaitė

2014-06-01

Full Text Available Nowadays, as consumption and production are growing enormously fast, companies are seeking for costs reduction aimed at ensuring competitiveness. In manufacturing companies, supply chain expenses play a colossal role in the cost of the final product. This paper focuses on the main processes in the logistics chain and their components. The authors analyse the relationship between the sup- ply chain expenses and the price of the final product, the classification of logistics chain costs and their minimization as an assumption for the competitiveness of the final price.

Synthesis and Intramolecular [4+2] Cycloaddition Reactions of 4-Pyridazinecarbonitriles with Alkyne Side Chains

Directory of Open Access Journals (Sweden)

Norbert Haider

1998-01-01

Full Text Available The preparation of a series of new 3-(alkynyl-X-substituted 4-pyridazinecarbonitriles 2-5 (X = O, NH is described. The compounds are shown to undergo thermally induced intramolecular Diels-Alder reactions with inverse electron demand, affording the fused benzonitriles 6-8. Incorporation of a 1,2-phenylene unit into the side chain, as in the case of compounds 10 and 13, results in a more favorable conformation of the dienophilic substructure and thus to a pronounced acceleration of the [4+2] cycloaddition reaction.

Research on the performance evaluation of agricultural products supply chain integrated operation

Science.gov (United States)

Jiang, Jiake; Wang, Xifu; Liu, Yang

2017-04-01

The agricultural product supply chain integrated operation can ensure the quality and efficiency of agricultural products, and achieve the optimal goal of low cost and high service. This paper establishes a performance evaluation index system of agricultural products supply chain integration operation based on the development status of agricultural products and SCOR, BSC and KPI model. And then, we constructing rough set theory and BP neural network comprehensive evaluation model with the aid of Rosetta and MATLAB tools and the case study is about the development of agricultural products integrated supply chain in Jing-Jin-Ji region. And finally, we obtain the corresponding performance results, and give some improvement measures and management recommendations to the managers.

Process Reengineering of Cold Chain Logistics of Agricultural Products Based on Low-carbon Economy

OpenAIRE

Guo, Hong-xia; Shao, Ming

2012-01-01

Through the process analysis of cold chain logistics of agricultural products, we find that cold chain logistics of agricultural products contradict the development model of low-carbon economy to some extent. We apply the development idea of low-carbon economy, introduce the third-party logistics companies, establish distribution center of cold chain logistics of agricultural products, and strengthen information sharing, to reengineer the process of cold chain logistics of agricultural produc...

Non-Covalent Fluorescent Labeling of Hairpin DNA Probe Coupled with Hybridization Chain Reaction for Sensitive DNA Detection.

Science.gov (United States)

Song, Luna; Zhang, Yonghua; Li, Junling; Gao, Qiang; Qi, Honglan; Zhang, Chengxiao

2016-04-01

An enzyme-free signal amplification-based assay for DNA detection was developed using fluorescent hairpin DNA probes coupled with hybridization chain reaction (HCR). The hairpin DNAs were designed to contain abasic sites in the stem moiety. Non-covalent labeling of the hairpin DNAs was achieved when a fluorescent ligand was bound to the abasic sites through hydrogen bonding with the orphan cytosine present on the complementary strand, accompanied by quench of ligand fluorescence. As a result, the resultant probes, the complex formed between the hairpin DNA and ligand, showed almost no fluorescence. Upon hybridization with target DNA, the probe underwent a dehybridization of the stem moiety containing an abasic site. The release of ligand from the abasic site to the solution resulted in an effective fluorescent enhancement, which can be used as a signal. Compared with a sensing system without HCR, a 20-fold increase in the sensitivity was achieved using the sensing system with HCR. The fluorescent intensity of the sensing system increased with the increase in target DNA concentration from 0.5 nM to 100 nM. A single mismatched target ss-DNA could be effectively discriminated from complementary target DNA. Genotyping of a G/C single-nucleotide polymorphism of polymerase chain reaction (PCR) products was successfully demonstrated with the sensing system. Therefore, integrating HCR strategy with non-covalent labeling of fluorescent hairpin DNA probes provides a sensitive and cost-effective DNA assay. © The Author(s) 2016.

Urine Nested Polymerase Chain Reaction in Neonatal Septicemia.

Science.gov (United States)

Das, B K; Suri, Shipra; Nath, Gopal; Prasad, Rajniti

2015-08-01

This cross-sectional study was done to evaluate diagnostic efficacy of urine nested polymerase chain reaction (PCR) using broad-range 16SrDNA PCR-based amplification, followed by restriction analysis and sequencing in neonatal septicemia. The study included 50 babies; 48% had vaginal delivery, 46% were preterm, 20% had a history of prolonged rupture of membranes and 56% were low birth weight (≤2500 g). Clinical presentations were lethargy (96%), respiratory distress (80%) and bleeding diathesis (16%). Absolute neutrophil count value, negative predictive value and accuracy of nested PCR were 100, 60, 78.9, 100 and 84%, respectively, compared with blood culture. Nested PCR can detect most bacteria in single assay and identify unusual and unexpected causal agents. © The Author [2015]. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Reaction of 3-Amino-1,2,4-Triazole with Diethyl Phosphite and Triethyl Orthoformate: Acid-Base Properties and Antiosteoporotic Activities of the Products.

Science.gov (United States)

Miszczyk, Patrycja; Wieczorek, Dorota; Gałęzowska, Joanna; Dziuk, Błażej; Wietrzyk, Joanna; Chmielewska, Ewa

2017-02-08

The reaction of diethyl phosphite with triethyl orthoformate and a primary amine followed by hydrolysis is presented, and the reaction was suitable for the preparation of (aminomethylene)bisphosphonates. 3-Amino-1,2,4-triazole was chosen as an interesting substrate for this reaction because it possesses multiple groups that can serve as the amino component in the reaction-namely, the side-chain and triazole amines. This substrate readily forms 1,2,4-triazolyl-3-yl-aminomethylenebisphosphonic acid (compound 1 ) as a major product, along with N -ethylated bisphosphonates as side products. The in vitro antiproliferative effects of the synthesized aminomethylenebisphosphonic acids against J774E macrophages were determined. These compounds exhibit similar activity to zoledronic acid and higher activity than incadronic acid.

Modeling and Optimization of Inventory-Distribution Routing Problem for Agriculture Products Supply Chain

OpenAIRE

Liao, Li; Li, Jianfeng; Wu, Yaohua

2013-01-01

Mathematical models of inventory-distribution routing problem for two-echelon agriculture products distribution network are established, which are based on two management modes, franchise chain and regular chain, one-to-many, interval periodic order, demand depending on inventory, deteriorating treatment cost of agriculture products, start-up costs of vehicles and so forth. Then, a heuristic adaptive genetic algorithm is presented for the model of franchise chain. For the regular chain model,...

O2O - Based Agricultural Products Supply Chain Process Integration Optimization Based on Internet +

OpenAIRE

Li Huijuan

2017-01-01

Traditional wholesale and retail, electricity supplier of agricultural products supply chain have many difficulties. The O2O supply chain of agricultural products of “Internet+”, committed to the integration of online and offline advantage process, has become the main direction of the agricultural products supply chain transformation. Practice operation results show that O2O supply chain can effectively play the advantages of online and offline process integration, but its further development...

Rapid quantification of semen hepatitis B virus DNA by real-time polymerase chain reaction

Science.gov (United States)

Qian, Wei-Ping; Tan, Yue-Qiu; Chen, Ying; Peng, Ying; Li, Zhi; Lu, Guang-Xiu; Lin, Marie C.; Kung, Hsiang-Fu; He, Ming-Ling; Shing, Li-Ka

2005-01-01

AIM: To examine the sensitivity and accuracy of real-time polymerase chain reaction (PCR) for the quantification of hepatitis B virus (HBV) DNA in semen. METHODS: Hepatitis B viral DNA was isolated from HBV carriers’ semen and sera using phenol extraction method and QIAamp DNA blood mini kit (Qiagen, Germany). HBV DNA was detected by conventional PCR and quantified by TaqMan technology-based real-time PCR (quantitative polymerase chain reaction (qPCR)). The detection threshold was 200 copies of HBV DNA for conventional PCR and 10 copies of HBV DNA for real time PCR per reaction. RESULTS: Both methods of phenol extraction and QIAamp DNA blood mini kit were suitable for isolating HBV DNA from semen. The value of the detection thresholds was 500 copies of HBV DNA per mL in the semen. The viral loads were 7.5 × 107 and 1.67 × 107 copies of HBV DNA per mL in two HBV infected patients’ sera, while 2.14 × 105 and 3.02 × 105 copies of HBV DNA per mL in the semen. CONCLUSION: Real-time PCR is a more sensitive and accurate method to detect and quantify HBV DNA in the semen. PMID:16149152

Development of Capillary Loop Convective Polymerase Chain Reaction Platform with Real-Time Fluorescence Detection

Directory of Open Access Journals (Sweden)

Wen-Pin Chou

2017-02-01

Full Text Available Polymerase chain reaction (PCR has been one of the principal techniques of molecular biology and diagnosis for decades. Conventional PCR platforms, which work by rapidly heating and cooling the whole vessel, need complicated hardware designs, and cause energy waste and high cost. On the other hand, partial heating on the various locations of vessels to induce convective solution flows by buoyancy have been used for DNA amplification in recent years. In this research, we develop a new convective PCR platform, capillary loop convective polymerase chain reaction (clcPCR, which can generate one direction flow and make the PCR reaction more stable. The U-shaped loop capillaries with 1.6 mm inner diameter are designed as PCR reagent containers. The clcPCR platform utilizes one isothermal heater for heating the bottom of the loop capillary and a CCD device for detecting real-time amplifying fluorescence signals. The stable flow was generated in the U-shaped container and the amplification process could be finished in 25 min. Our experiments with different initial concentrations of DNA templates demonstrate that clcPCR can be applied for precise quantification. Multiple sample testing and real-time quantification will be achieved in future studies.

Detection of Mycobacterium tuberculosis in clinical samples by two-step polymerase chain reaction and nonisotopic hybridization methods.

OpenAIRE

Shawar, R M; el-Zaatari, F A; Nataraj, A; Clarridge, J E

1993-01-01

Detection of Mycobacterium tuberculosis in clinical specimens by the polymerase chain reaction (PCR) was compared with detection by culture. A 317-bp segment within the M. tuberculosis-specific insertion sequence IS6110 was amplified. The detection limit of the PCR assay for cultured mycobacteria was 50 cells per reaction by ethidium bromide-stained agarose gel electrophoresis and 5 cells per reaction by hybridization with an oligonucleotide probe conjugated with either digoxigenin or alkalin...

Development of odd-Z-projectile reactions for transactinide element synthesis

International Nuclear Information System (INIS)

Folden III, Charles Marvin

2004-01-01

The development of new odd-Z-projectile reactions leading to the production of transactinide elements is described. The cross section of the even-Z-projectile 208Pb(64Ni, n)271Ds reaction was measured at two new energies using the Berkeley Gas-filled Separator at the Lawrence Berkeley National Laboratory 88-Inch Cyclotron. In total, seven decay chains attributable to 271Ds were observed. These data, combined with previous results, establish an excitation function for the production of 271Ds. The maximum cross section was 20 +15 -11 pb at a center-of-target energy of 311.5 MeV in the laboratory frame.The data from the 271Ds experiments were used to estimate the optimum beam energy for the new odd-Z-projectile 208Pb(65Cu, n)272-111 reaction using the Fusion by Diffusion theory proposed by Swiatecki, Siwek-Wilczynska, and Wilczynski. A cross section for this reaction was measured for the first time, at a center-of-target energy of 321.1 MeV in the laboratory frame. The excitation energy f or compound nuclei formed at the target center was 13.2 MeV. One decay chain was observed, resulting in a measured cross section of 1.7 +3.9 -1.4 pb. This decay chain is in good agreement with previously published data on the decay of 272-111.The new odd-Z-projectile 208Pb(55Mn, n)262Bh reaction was studied at three different projectile energies, and 33 decay chains of 262Bh were observed. The existence of a previously reported alpha-decaying isomeric state in this nuclide was confirmed. Production of the ground state was preferred at all three beam energies. The maximum cross section was 540 +180 -150 pb at a projectile center-of-target energy of 264.0 MeV. This cross section is much larger than that previously reported for the even-Z-projectile 209Bi(54Cr, n)262Bh reaction, which may be because the 54Cr projectile energies in the latter reaction were too high for optimum production of the 1n product. At the highest projectile energy of 268.0 MeV in the target center, two decay

Challenges for bio-based products in sustainable value chains

NARCIS (Netherlands)

Cardon, L.; Lin, J.W.; De Groote, M.; Ragaert, K.; Kopecka, J.A.; Koster, R.P.

2011-01-01

This work concerns studies related to strategic development of products in which bio-based plastics are or will be applied, referred to as bio-based products. The studies cover (1) current and potential benefits of bio-based products in extended value chains including activities after end-of-life of

Fast real-time polymerase chain reaction for quantitative detection of Lactobacillus delbrueckii bacteriophages in milk.

Science.gov (United States)

Martín, Maria Cruz; del Rio, Beatriz; Martínez, Noelia; Magadán, Alfonso H; Alvarez, Miguel A

2008-12-01

One of the main microbiological problems of the dairy industry is the susceptibility of starter bacteria to virus infections. Lactobacillus delbrueckii, a component of thermophilic starter cultures used in the manufacture of several fermented dairy products, including yogurt, is also sensitive to bacteriophage attacks. To avoid the problems associated with these viruses, quick and sensitive detection methods are necessary. In the present study, a fast real-time quantitative polymerase chain reaction assay for the direct detection and quantification of L. delbrueckii phages in milk was developed. A set of primers and a TaqMan MGB probe was designed, based on the lysin gene sequence of different L. delbrueckii phages. The results show the proposed method to be a rapid (total processing time 30 min), specific and highly sensitive technique for detecting L. delbrueckii phages in milk.

Sustainable consumption and production in the food supply chain

DEFF Research Database (Denmark)

Govindan, Kannan

2018-01-01

Increased globalization and a growing world population have a great impact on the sustainability of supply chains, especially within the food industry. The way food is produced, processed, transported, and consumed has a great impact on whether sustainability is achieved throughout the whole food...... supply chain. Due to the complexity that persists in coordinating the members of food supply chain, food wastage has increased over the past few years. To achieve sustainable consumption and production (SCP), food industry stakeholders need to be coordinated and to have their views reflected...... in an optimized manner. However, not much research has been done concerning the influence of stakeholders and supply chain members’ coordination in the food industry's SCP context. To facilitate the theory development for SCP, in this work, a short literature review on sustainable supply chain management...

FUNGAL SPECIATION USING QUANTITATIVE POLYMERASE CHAIN REACTION (QPCR) IN PATIENTS WITH AND WITHOUT CHRONIC RHINOSINUSITIS

Science.gov (United States)

Objectives/Hypothesis: 1. to determine the mycology of the middle meatus using an endoscopically guided brush sampling technique and polymerase chain reaction laboratory processing of nasal mucous. 2. To compare the mycology of the middle meatus in patients with sinus disease to...

Automated generation of burnup chain for reactor analysis applications

International Nuclear Information System (INIS)

Tran Viet Phu; Tran Hoai Nam; Akio Yamamoto; Tomohiro Endo

2015-01-01

This paper presents the development of an automated generation of a new burnup chain for reactor analysis applications. The JENDL FP Decay Data File 2011 and Fission Yields Data File 2011 were used as the data sources. The nuclides in the new chain are determined by restrictions of the half-life and cumulative yield of fission products or from a given list. Then, decay modes, branching ratios and fission yields are recalculated taking into account intermediate reactions. The new burnup chain is output according to the format for the SRAC code system. Verification was performed to evaluate the accuracy of the new burnup chain. The results show that the new burnup chain reproduces well the results of a reference one with 193 fission products used in SRAC. Further development and applications are being planned with the burnup chain code. (author)

η production in proton-nucleus reactions

International Nuclear Information System (INIS)

Cassing, W.; Batko, G.; Vetter, T.; Wolf, G.

1991-01-01

The production of η-mesons in proton-nucleus reactions is analysed with respect to primary nucleon-nucleon (NN→NN η ) and secondary pion-nucleon (πN→ηN) production processes on the basis of Hartree-Fock groundstate momentum distributions and free on-shell production processes. The folding model adopted compares well for meson production with more involved simulations based on VUU transport equations. Similar to K + production in proton-nucleus reactions the η-mesons are primarily produced by the πN→ηN channel. However, η-mesons are absorbed in nuclei via excitation of the N * (1535) resonance which leads to strong distortions of the primordial spectra. On the other hand, the experimental mass dependence of the differential cross sections might yield information about the in-medium properties of this resonance. (orig.)

Determination of locust bean gum and guar gum by polymerase chain reaction and restriction fragment length polymorphism analysis.

Science.gov (United States)

Meyer, K; Rosa, C; Hischenhuber, C; Meyer, R

2001-01-01

A polymerase chain reaction (PCR) was developed to differentiate the thickening agents locust bean gum (LBG) and the cheaper guar gum in finished food products. Universal primers for amplification of the intergenic spacer region between trnL 3' (UAA) exon and trnF (GAA) gene in the chloroplast (cp) genome and subsequent restriction analysis were applied to differentiate guar gum and LBG. The presence of guar gum powder added to LBG powder was detectable. Based on data obtained from sequencing this intergenic spacer region, a second PCR method for the specific detection of guar gum DNA was also developed. This assay detected guar gum powder in LBG in amounts as low as 1% (w/w). Both methods successfully detected guar gum and/or LBG in ice cream stabilizers and in foodstuffs, such as dairy products, ice cream, dry seasoning mixes, a finished roasting sauce, and a fruit jelly product, but not in products with highly degraded DNA, such as tomato ketchup and sterilized chocolate cream. Both methods detected guar gum and LBG in ice cream and fresh cheese at levels <0.1%.

Applying the means-end chain concept to product development

DEFF Research Database (Denmark)

Søndergaard, Helle Alsted

This paper proposes that the means-end chain (MEC) approach can influence the use of market information and inter-functional communication in new product development (NPD). The central question is whether market information represented by means-end chain data can be a vehicle for inter......-functional communication. This paper describes a PhD project - that through case studies and action research in two companies - aims at investigating the effects on communication and attitudes to communication by those involved when introducing means-end chain data as market information in NPD....

Research on Supply Chain Coordination of Fresh Agricultural Products under Agricultural Insurance

Directory of Open Access Journals (Sweden)

Zhang Pei

2017-01-01

Full Text Available Based on the fact that the current fresh agricultural products are susceptible to natural risks and the coordination of supply chain is poor, This paper constructs the supply chain profit model under the two models of natural risk and agricultural insurance, Firstly, studying the coordination function of the supply chain system under Two-part Tariff; Then discussing the setting and claiming mechanism of agricultural insurance, compares the influence of agricultural insurance on supply chain profit and supply chain coordination; Finally, giving an example to validate the model results and give decision - making opinions. Research shows that the supply chain of fresh agricultural products can coordinated under Two-part Tariff, but the supply chain cooperation is poor in the natural risk , need to further stabilize and optimize the supply chain; When the risk factor is less than the non-participation insurance coefficient, not to participate in agricultural insurance is conducive to maintaining the coordination of the supply chain system; When the risk coefficient exceeds the non-participation insurance coefficient, the introduction of agricultural insurance can not only effectively manage the natural risks, but also help to improve the coordination of the supply chain system.

Identification of Atlantic salmon (Salmo salar) and rainbow trout (Oncorhynchus mykiss) by using polymerase chain reaction amplification and restriction analysis of the mitochondrial cytochrome b gene.

Science.gov (United States)

Carrera, E; García, T; Céspedes, A; González, I; Sanz, B; Hernández, P E; Martín, R

1998-04-01

Restriction site analysis of polymerase chain reaction (PCR) products from a conserved region of the cytochrome b gene has been used for the identification of fresh and smoked samples of Atlantic salmon (Salmo salar) and rainbow trout (Oncorhynchus mykiss). Digestion of the 359-bp PCR product with the endonucleases EcoRV and TaqI yielded specific banding patterns for salmon and trout. This genetic marker can be very useful for detecting fraudulent substitution of the cheaper smoked trout for the more expensive smoked salmon.

Investigating the nature of palladium chain-walking in the enantioselective redox-relay Heck reaction of alkenyl alcohols.

Science.gov (United States)

Hilton, Margaret J; Xu, Li-Ping; Norrby, Per-Ola; Wu, Yun-Dong; Wiest, Olaf; Sigman, Matthew S

2014-12-19

The mechanism of the redox-relay Heck reaction was investigated using deuterium-labeled substrates. Results support a pathway through a low energy palladium-alkyl intermediate that immediately precedes product formation, ruling out a tautomerization mechanism. DFT calculations of the relevant transition structures at the M06/LAN2DZ+f/6-31+G* level of theory show that the former pathway is favored by 5.8 kcal/mol. Palladium chain-walking toward the alcohol, following successive β-hydride eliminations and migratory insertions, is also supported in this study. The stereochemistry of deuterium labels is determined, lending support that the catalyst remains bound to the substrate during the relay process and that both cis- and trans-alkenes form from β-hydride elimination.

STUDY OF UROGENITAL TRACT MICROFLORA OF DNEPROPETROVSK FEMALES BY POLYMERASE CHAIN REACTION

Directory of Open Access Journals (Sweden)

Honcharova S.Y.

2015-08-01

Full Text Available We isolated and identified the pathogens from the urogenital tract in 100 women of 26-55 years in Diagnostic Center of Dnepropetrovsk Medical Academy by polymerase chain reaction. It was found that all investigated microflora was represented by HPV of high and low cancer risk - HSV type 1+2, Ureaplasma urealyticum, Chlamydia trachomatis, Trichomonas vaginalis, Mycoplasma hominis, and Candida yeast species. The most abundant pathogens from the urogenital tract were HPV, Ureaplasma urealyticum, and Chlamydia trachomatis.

Use of multiplex polymerase chain reaction-based assay to conduct epidemiological studies on bovine hemoparasites in Mexico.

Science.gov (United States)

Figueroa, J V; Alvarez, J A; Ramos, J A; Vega, C A; Buening, G M

1993-01-01

A study was conducted to test the applicability of a Polymerase Chain Reaction (PCR)-based approach for the simultaneous detection of the bovine hemoparasites Babesia bigemina, B. bovis and Anaplasma marginale. Bovine blood samples from cattle ranches of a previously determined enzootic zone in the Yucatan Peninsula of Mexico, were collected from peripheral blood and processed for PCR analysis. Blood samples were subjected to DNA amplification by placing an aliquot in a reaction tube containing oligonucleotide primers specific for DNA of each hemoparasite species. The PCR products were detected by Dot-Blot nucleic acid hybridization utilizing nonradioactive, species-specific, digoxigenin PCR-labeled DNA probes. Four hundred twenty one field samples analyzed by the multiplex PCR-DNA probe assay showed 66.7%, 60.1% and 59.6% prevalence rates for B. bigemina, B. bovis and A. marginale, respectively. The multiplex PCR analysis showed that animals with single, double or triple infection could be detected with the parasite specific DNA probes. The procedure is proposed as a valuable tool for the epidemiological analysis in regions where the hemoparasite species are concurrently infecting cattle.

Reaction of Hydrogen Sulfide with Oxygen in the Presence ofSulfite

Energy Technology Data Exchange (ETDEWEB)

Weres, Oleh; Tsao, Leon

1983-01-01

Commonly, abatement of hydrogen sulfide emissions from a geothermal powerplant requires that hydrogen sulfide dissolved in the cooling water be eliminated by chemical reaction. Oxidation by atmospheric oxygen is the preferred reaction, but requires a suitable catalyst. Nickel is the most potent and thereby cheapest catalyst for this purpose. One Mg/L nickel in the cooling water would allow 99% removal of hydrogen sulfide to be attained. A major drawback of catalytic air oxidation is that colloidal sulfur is a major reaction product; this causes rapid sludge accumulation and deposition of sulfur scale. The authors studied the kinetics and product distribution of the reaction of hydrogen sulfide with oxygen, catalyzed by nickel. Adding sodium sulfite to the solution completely suppresses formation of colloidal sulfur by converting it to thiosulfate. The oxidation reaction is an autocatalytic, free radical chain reaction. A rate expression for this reaction and a detailed reaction mechanism were developed. Nickel catalyzes the chain initiation step, and polysulfidoradical ions propagate the chains. Several complexes of iron and cobalt were also studied. Iron citrate and iron N-hydroxyEDT are the most effective iron based catalysts. Uncomplexed cobalt is as effective as nickel, but forms a precipitate of cobalt oxysulfide and is too expensive for practical use.

Reaction of hydrogen sulfide with oxygen in the presence of sulfite

Energy Technology Data Exchange (ETDEWEB)

Weres, O.; Tsao, L.

1983-01-14

Commonly, abatement of hydrogen sulfide emission from a geothermal powerplant requires that hydrogen sulfide dissolved in the cooling water be eliminated by chemical reaction. Oxidation by atmospheric oxygen is the preferred reaction, but requires a suitable catalyst. Nickel is the most potent and thereby cheapest catalyst for this purpose. One mg/L nickel in the cooling water would allow 99% removal of hydrogen sulfide to be attained. A major drawback of catalytic air oxidation is that colloidal sulfur is a major reaction product; this causes rapid sludge accumulation and deposition of sulfur scale. We studied the kinetics and product distribution of the reaction of hydrogen sulfide with oxygen, catalyzed by nickel. Adding sodium sulfite to the solution completely suppresses formation of colloidal sulfur by converting it to thiosulfate. The oxidation reaction is an autocatalytic, free radical chain reaction. A rate expression for this reaction and a detailed reaction mechanism were developed. Nickel catalyzes the chain initiation step, and polysulfidoradical ions propagate the chains. Several complexes of iron and cobalt were also studied. Iron citrate and iron N-hydroxyEDTA are the most effective iron based catalysts. Uncomplexed cobalt is as effective as nickel, but forms a precipitate of cobalt oxysulfide and is too expensive for practical use. 33 figures, 9 tables.

Traceability: a demand of agro industrial chain for special products

Directory of Open Access Journals (Sweden)

José Verissimo Foggiatto Silveira

2007-10-01

Full Text Available The inclusion of agricultural products with different nutritional features has altered the relationship, the upstream and the downstream of enterprises that produce and commercialize them. Coordination in the Agro Industrial System is demanded, including traceability as a way to guarantee the conformity of products, attending external clients and agricultural industries that require quality certification. This quality tool enables the identification of some details in the productive chain, such as seeds, farming, harvesting, storage, transportation and industrialization of products. Thus, this essay describes the concept of traceability and provides information of special products from a cooperative from Paraná, which has controlled process in the productive chain, demanded by contractual partnerships done with enterprises that provide fertilizers and food processors. It was identified that this cooperative commercializes three products that need traceability: two special kinds of corn and the regular kind of soybean.

Detection of Salmonella typhi by nested polymerase chain reaction in blood, urine, and stool samples

NARCIS (Netherlands)

Hatta, Mochammad; Smits, Henk L.

2007-01-01

A nested polymerase chain reaction (PCR) specific for Salmonella enterica serovar Typhi was used for the detection of the pathogen in blood, urine, and stool samples from 131 patients with clinical suspicion of typhoid fever. The sensitivity of blood culture, the PCRs with blood, urine, and feces,

Identifikasi Brucella abortus Isolat Lokal dengan Brucella abortus Strain Specific-Polymerase Chain Reaction (IDENTIFICATION OF LOCAL ISOLATES OF BRUCELLA ABORTUS USING BRUCELLA ABORTUS STRAIN SPECIFIC-POLYMERASE CHAIN REACTION ASSAY)

OpenAIRE

Susan Maphilindawati Noor; Pratiwi Pujilestari Sudarmono; Asmarani Kusumawati; Anis Karuniawati

2014-01-01

Brucella abortus Strain Specific-Polymerase Chain Reaction (BaSS-PCR) is a single multiplex PCRtechnique which able to identify and differentiate between Brucella abortus field strains (biovar 1, 2, and4), B. abortus vaccine strains, Brucella species, and non-Brucella species. In this study, BaSS-PCR wasapplied to identify local isolates of B. abortus in order to investigate the B. abortus strains that infectedcattle in Indonesia. Fifty local strains of B.abortus isolated from infected cattle...

An evolutionary sensor approach for self-organizing production chains

Science.gov (United States)

Mocan, M.; Gillich, E. V.; Mituletu, I. C.; Korka, Z. I.

2018-01-01

Industry 4.0 is the actual great step in industrial progress. Convergence of industrial equipment with the power of advanced computing and analysis, low-cost sensing, and new connecting technologies are presumed to bring unexpected advancements in automation, flexibility, and efficiency. In this context, sensors ensure information regarding three essential areas: the number of processed elements, the quality of production and the condition of tools and equipment. To obtain this valuable information, the data resulted from a sensor has to be firstly processed and afterward used by the different stakeholders. If machines are linked together, this information can be employed to organize the production chain with few or without human intervention. We describe here the implementation of a sensor in a milling machine that is part of a simple production chain, capable of providing information regarding the number of manufactured pieces. It is used by the other machines in the production chain, in order to define the type and number of pieces to be manufactured by them and/or to set optimal parameters for their working regime. Secondly, the information achieved by monitoring the machine and manufactured piece dynamic behavior is used to evaluate the product quality. This information is used to warn about the need of maintenance, being transmitted to the specialized department. It is also transmitted to the central unit, in order to reorganize the production by involving other machines or by reconsidering the manufacturing regime of the existing machines. A special attention is drawn on analyzing and classifying the signals acquired via optical sensor from simulated processes.

Automated generation of burnup chain for reactor analysis applications

International Nuclear Information System (INIS)

Tran, Viet-Phu; Tran, Hoai-Nam; Yamamoto, Akio; Endo, Tomohiro

2017-01-01

This paper presents the development of an automated generation of burnup chain for reactor analysis applications. Algorithms are proposed to reevaluate decay modes, branching ratios and effective fission product (FP) cumulative yields of a given list of important FPs taking into account intermediate reactions. A new burnup chain is generated using the updated data sources taken from the JENDL FP decay data file 2011 and Fission yields data file 2011. The new burnup chain is output according to the format for the SRAC code system. Verification has been performed to evaluate the accuracy of the new burnup chain. The results show that the new burnup chain reproduces well the results of a reference one with 193 fission products used in SRAC. Burnup calculations using the new burnup chain have also been performed based on UO_2 and MOX fuel pin cells and compared with a reference chain th2cm6fp193bp6T.

Automated generation of burnup chain for reactor analysis applications

Energy Technology Data Exchange (ETDEWEB)

Tran, Viet-Phu [VINATOM, Hanoi (Viet Nam). Inst. for Nuclear Science and Technology; Tran, Hoai-Nam [Duy Tan Univ., Da Nang (Viet Nam). Inst. of Research and Development; Yamamoto, Akio; Endo, Tomohiro [Nagoya Univ., Nagoya-shi (Japan). Dept. of Materials, Physics and Energy Engineering

2017-05-15

This paper presents the development of an automated generation of burnup chain for reactor analysis applications. Algorithms are proposed to reevaluate decay modes, branching ratios and effective fission product (FP) cumulative yields of a given list of important FPs taking into account intermediate reactions. A new burnup chain is generated using the updated data sources taken from the JENDL FP decay data file 2011 and Fission yields data file 2011. The new burnup chain is output according to the format for the SRAC code system. Verification has been performed to evaluate the accuracy of the new burnup chain. The results show that the new burnup chain reproduces well the results of a reference one with 193 fission products used in SRAC. Burnup calculations using the new burnup chain have also been performed based on UO{sub 2} and MOX fuel pin cells and compared with a reference chain th2cm6fp193bp6T.

Markov chain aggregation and its applications to combinatorial reaction networks.

Science.gov (United States)

Ganguly, Arnab; Petrov, Tatjana; Koeppl, Heinz

2014-09-01

We consider a continuous-time Markov chain (CTMC) whose state space is partitioned into aggregates, and each aggregate is assigned a probability measure. A sufficient condition for defining a CTMC over the aggregates is presented as a variant of weak lumpability, which also characterizes that the measure over the original process can be recovered from that of the aggregated one. We show how the applicability of de-aggregation depends on the initial distribution. The application section is devoted to illustrate how the developed theory aids in reducing CTMC models of biochemical systems particularly in connection to protein-protein interactions. We assume that the model is written by a biologist in form of site-graph-rewrite rules. Site-graph-rewrite rules compactly express that, often, only a local context of a protein (instead of a full molecular species) needs to be in a certain configuration in order to trigger a reaction event. This observation leads to suitable aggregate Markov chains with smaller state spaces, thereby providing sufficient reduction in computational complexity. This is further exemplified in two case studies: simple unbounded polymerization and early EGFR/insulin crosstalk.

Energy conservation and maximal entropy production in enzyme reactions.

Science.gov (United States)

Dobovišek, Andrej; Vitas, Marko; Brumen, Milan; Fajmut, Aleš

2017-08-01

A procedure for maximization of the density of entropy production in a single stationary two-step enzyme reaction is developed. Under the constraints of mass conservation, fixed equilibrium constant of a reaction and fixed products of forward and backward enzyme rate constants the existence of maximum in the density of entropy production is demonstrated. In the state with maximal density of entropy production the optimal enzyme rate constants, the stationary concentrations of the substrate and the product, the stationary product yield as well as the stationary reaction flux are calculated. The test, whether these calculated values of the reaction parameters are consistent with their corresponding measured values, is performed for the enzyme Glucose Isomerase. It is found that calculated and measured rate constants agree within an order of magnitude, whereas the calculated reaction flux and the product yield differ from their corresponding measured values for less than 20 % and 5 %, respectively. This indicates that the enzyme Glucose Isomerase, considered in a non-equilibrium stationary state, as found in experiments using the continuous stirred tank reactors, possibly operates close to the state with the maximum in the density of entropy production. Copyright © 2017 Elsevier B.V. All rights reserved.

PROCUREMENT IN THE SUPPLY CHAIN: AN ELEMENT OF HOTEL PRODUCT COMPETITIVENESS

Directory of Open Access Journals (Sweden)

Edna Mrnjavac

2016-12-01

Full Text Available Background: Only recently has the supply chain in tourism, the hotel industry included, started to be explored. The reason for is the knowledge that the supply chain can contribute to enhancing the quality, and lowering the cost, of a hotel product. Driven by strong competition, hotel companies continuously seek to improve the organization of their business processes. Input that depends on procurement determines the features of the final product. The question is, do hotel companies apply the principles of a supply chain when organizing procurement and, if so, to what extent? To which degree, if any, is it possible to define a universal concept of logistics procurement, or does a specific hotel company represent the dominant criterion in the application of the supply-chain principle? Due to the complexity of hotel business processes and because of the role of procurement in the entire production process, research will be limited to the aforementioned segment. The study, the results of which are reported in this paper, has a preliminary character and, therefore, covers a small number of hotels, each with different characteristics and located in different destinations. The aim was to learn whether essentially different hotel enterprises have a common basis for the procurement supply process, as this would indicate the possibility of designing a common model. Methods: The methods of definition, induction, and deduction were used in defining the concept and basic features of the supply chain of hotels. Hotel business processes were studied by the methods of analysis and synthesis. The interview method was used to study the business procurement process from the perspective of hotel management. Results: The study showed that hotels use certain principles of supply chain in organizing their procurement processes. It also indicated the inseparability of the principles of the supply chain, procurement and the organization of a company: the appropriate

[Application of the polymerase chain reaction (PCR) in the diagnosis of Hb S-beta(+)-thalassemia].

Science.gov (United States)

Harano, K; Harano, T; Kushida, Y; Ueda, S

1991-08-01

Isoelectric focusing of the hemolysate prepared from a two-year-old American black boy with microcytic hypochromia showed the presence of a high percentage (63.3%) of such Hb variant as Hb S, while the levels of Hb A, Hb F and Hb A2 were 20.0%, 12.7%, and 4.0%, respectively. The ratio of the non-alpha-chain to the alpha-chain of the biosynthesized globin chains was 0.49. The variant was identified as Hb S by amino acid analysis of the abnormal peptide (beta T-1) and digestion of DNA amplified by the polymerase chain reaction with enzyme Eco 81 I. This was further confirmed by DNA sequencing. DNA sequencing of a beta-gene without the beta s-mutation revealed a nucleotide change of T to C in the polyadenylation signal sequence AATAAA 3' to the beta-gene, resulting in beta(+)-thalassemia. These results are consistent with the existence of a beta s-gene and a beta(+)-thalassemia gene in trans.

Supply chains of forest chip production in Finland

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, Kalle (Metsaeteho Oy, Helsinki (Finland)), e-mail: kalle.karha@metsateho.fi

2010-07-15

The Metsaeteho study investigated how logging residue chips, stump wood chips, and chips from small sized thinning wood and large-sized (rotten) roundwood used by heating and power plants were produced in Finland in 2008. Almost all the major forest chip suppliers in Finland were involved in the study. The total volume of forest chips supplied in 2008 by these suppliers was 6.5 TWh. The study was implemented by conducting an e-mail questionnaire survey and telephone interviews. Research data was collected in March-May 2009. The majority of the logging residue chips and chips from small-sized thinning wood were produced using the roadside chipping supply chain in Finland in 2008. The chipping at plant supply chain was also significant in the production of logging residue chips. 70% of all stump wood chips consumed were comminuted at the plant and 29% at terminals. The role of the terminal chipping supply chain was also significant in the production of chips from logging residues and small-sized wood chips. When producing chips from large-sized (rotten) roundwood, nearly a half of chips were comminuted at plants and more than 40% at terminals

Supply chains of forest chip production in Finland

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K. (Metsaeteho Oy, Helsinki (Finland)), Email: kalle.karha@metsateho.fi

2009-07-01

The Metsaeteho study investigated how logging residue chips. stump wood chips, and chips from small-sized thinning wood and large-sized (rotten) roundwood used by heating and power plants were produced in Finland in 2008. Almost all the major forest chip suppliers in Finland were involved in the study. The total volume of forest chips supplied in 2008 by these suppliers was 6,5 TWh. The study was implemented by conducting an e-mail questionnaire survey and telephone interviews. Research data was collected in March-May 2009. The majority of the logging residue chips and chips from small-sized thinning wood were produced using the roadside chipping supply chain in Finland in 2008. The chipping at plant supply chain was also significant in the production of logging residue chips. 70% of all stump wood chips consumed were comminuted at the plant and 29% at terminals. The role of the terminal chipping supply chain was also significant in the production of chips from logging residues and small-sized wood chips. When producing chips from large-sized (rotten) roundwood, nearly a half of chips were comminuted at plants and more than 40 % at terminals. (orig.)

Rapid and specific identification of Yersinia pestis by using a nested polymerase chain reaction procedure.

OpenAIRE

Campbell, J; Lowe, J; Walz, S; Ezzell, J

1993-01-01

We developed a 4-h nested polymerase chain reaction assay that detected a region of the plasminogen activator gene of Yersinia pestis in 100% of 43 Y. pestis strains isolated from humans, rats, and fleas yet was unreactive with the closely related species Yersinia enterocolitica and Yersinia pseudotuberculosis.

A Simple Reverse Transcription-Polymerase Chain Reaction for Dengue Type 2 Virus Identification

Directory of Open Access Journals (Sweden)

Luiz Tadeu M Figueiredo

1997-05-01

Full Text Available We show here a simplified reverse transcription-polymerase chain reaction (RT-PCR for identification of dengue type 2 virus. Three dengue type 2 virus strains, isolated from Brazilian patients, and yellow fever vaccine 17DD, as a negative control, were used in this study. C6/36 cells were infected with the virus, and tissue culture fluids were collected after 7 days of infection period. The RT-PCR, a combination of RT and PCR done after a single addition of reagents in a single reaction vessel was carried out following a digestion of virus with 1% Nonidet P-40. The 50ml assay reaction mixture included 50 pmol of a dengue type 2 specific primer pair amplifying a 210 base pair sequence of the envelope protein gene, 0.1 mM of the four deoxynucleoside triphosphates, 7.5U of reverse transcriptase, and 1U of thermostable Taq DNA polymerase. The reagent mixture was incubated for 15 min at 37oC for RT followed by a variable amount of cycles of two-step PCR amplification (92oC for 60 sec, 53oC for 60 sec with slow temperature increment. The PCR products were subjected to 1.7% agarose gel electrophoresis and visualized with UV light after gel incubation in ethidium bromide solution. DNA bands were observed after 25 and 30 cycles of PCR. Virus amount as low as 102.8 TCID50/ml was detected by RT-PCR. Specific DNA amplification was observed with the three dengue type 2 strains. This assay has advantages compared to other RT-PCRs: it avoids laborious extraction of virus RNA; the combination of RT and PCR reduces assay time, facilitates the performance and reduces risk of contamination; the two-step PCR cycle produces a clear DNA amplification, saves assay time and simplifies the technique

Different DNA methylation patterns detected by the Amplified Methylation Polymorphism Polymerase Chain Reaction (AMP PCR) technique among various cell types of bulls

OpenAIRE

Phutikanit, Nawapen; Suwimonteerabutr, Junpen; Harrison, Dion; D'Occhio, Michael; Carroll, Bernie; Techakumphu, Mongkol

2010-01-01

Abstract Background The purpose of this study was to apply an arbitrarily primed methylation sensitive polymerase chain reaction (PCR) assay called Amplified Methylation Polymorphism Polymerase Chain Reaction (AMP PCR) to investigate the methylation profiles of somatic and germ cells obtained from Holstein bulls. Methods Genomic DNA was extracted from sperm, leukocytes and fibroblasts obtained from three bulls and digested with a methylation sensitive endonuclease (HpaII). The native genomic ...

Brucella contamination in raw milk by polymerase chain reaction

Directory of Open Access Journals (Sweden)

Mohammad Khalili

2016-10-01

Full Text Available Background: Human brucellosis is a significant public health problem in many middle east countries including Iran. Brucella organisms, which are small aerobic, facultative intracellular coccobacilli, localize in the reproductive organs of host animals, causing abortions and sterility. They are shed in large numbers in the animal’s urine, milk, placental fluid, and other fluids. Dairy product from raw milk are a potential threat to public health in endemic developing countries. The gold standard for the diagnosis of brucellosis is isolation of Brucella species. However, isolation Brucella species is time consuming and needed to level 3 biocontainment facilities and highly skilled technical personnel to handle samples and live bacteria for eventual identification. Handling Brucella species increase risk of laboratory infection. Polymerase chain reaction (PCR with high sensitivity and specifity overcomed to these disadvantages. The aim of this study was to detect Brucella species in milk from dairy cattle farms in Kerman province, Iran by PCR technique. Methods: Forty and eight bulk tank milk (BTM were collected from October 2015 to March 2016 from 48 dairy cattle farm including 4200 cows. DNA of milk samples extracted by lysis buffer and proteinase K method. All milk samples were examined by PCR to detect Brucella-specific DNA targeting IS 711. Positive samples must be showed 317 bp amplified, corresponding to the expected size of the IS 711 genome region in all Brucella species. Results: Using IS711 primer were detected in 4 samples (8.3% Brucella spp. from 48 BTM samples in this area. Conclusion: The results indicate that brucellosis by Brucella species is endemic in the Kerman province dairy farms. Consumption of raw milk dairy products by individual farmers operating under poor hygienic conditions represents an high risk to public health. The need for implementing control measures and raising public awareness on zoonotic transmission of

Methods for forming complex oxidation reaction products including superconducting articles

International Nuclear Information System (INIS)

Rapp, R.A.; Urquhart, A.W.; Nagelberg, A.S.; Newkirk, M.S.

1992-01-01

This patent describes a method for producing a superconducting complex oxidation reaction product of two or more metals in an oxidized state. It comprises positioning at least one parent metal source comprising one of the metals adjacent to a permeable mass comprising at least one metal-containing compound capable of reaction to form the complex oxidation reaction product in step below, the metal component of the at least one metal-containing compound comprising at least a second of the two or more metals, and orienting the parent metal source and the permeable mass relative to each other so that formation of the complex oxidation reaction product will occur in a direction towards and into the permeable mass; and heating the parent metal source in the presence of an oxidant to a temperature region above its melting point to form a body of molten parent metal to permit infiltration and reaction of the molten parent metal into the permeable mass and with the oxidant and the at least one metal-containing compound to form the complex oxidation reaction product, and progressively drawing the molten parent metal source through the complex oxidation reaction product towards the oxidant and towards and into the adjacent permeable mass so that fresh complex oxidation reaction product continues to form within the permeable mass; and recovering the resulting complex oxidation reaction product

Production chain of CMS pixel modules

CERN Multimedia

2006-01-01

The pictures show the production chain of pixel modules for the CMS detector. Fig.1: overview of the assembly procedure. Fig.2: bump bonding with ReadOut Chip (ROC) connected to the sensor. Fig.3: glueing a raw module onto the baseplate strips. Fig.4: glueing of the High Density Interconnect (HDI) onto a raw module. Fig.5: pull test after heat reflow. Fig.6: wafer sensor processing, Indium evaporation.

Construction of Network Management Information System of Agricultural Products Supply Chain Based on 3PLs

Institute of Scientific and Technical Information of China (English)

2010-01-01

The necessity to construct the network management information system of 3PLs agricultural supply chain is analyzed,showing that 3PLs can improve the overall competitive advantage of agricultural supply chain.3PLs changes the homogeneity management into specialized management of logistics service and achieves the alliance of the subjects at different nodes of agricultural products supply chain.Network management information system structure of agricultural products supply chain based on 3PLs is constructed,including the four layers (the network communication layer,the hardware and software environment layer,the database layer,and the application layer) and 7 function modules (centralized control,transportation process management,material and vehicle scheduling,customer relationship,storage management,customer inquiry,and financial management).Framework for the network management information system of agricultural products supply chain based on 3PLs is put forward.The management of 3PLs mainly includes purchasing management,supplier relationship management,planning management,customer relationship management,storage management and distribution management.Thus,a management system of internal and external integrated agricultural enterprises is obtained.The network management information system of agricultural products supply chain based on 3PLs has realized the effective sharing of enterprise information of agricultural products supply chain at different nodes,establishing a long-term partnership revolving around the 3PLs core enterprise,as well as a supply chain with stable relationship based on the supply chain network system,so as to improve the circulation efficiency of agricultural products,and to explore the sales market for agricultural products.

On Production and Green Transportation Coordination in a Sustainable Global Supply Chain

Directory of Open Access Journals (Sweden)

Feng Guo

2017-11-01

Full Text Available This paper addresses a coordination problem of production and green transportation and the effects of production and transportation coordination on supply chain sustainability in a global supply chain environment with the consideration of important realistic characteristics, including parallel machines, different order processing complexities, fixed delivery departure times, green transportation and multiple transportation modes. We formulate the measurements for carbon emissions of different transportation modes, including air, sea and land transportation. A hybrid genetic algorithm-based optimization approach is developed to handle this problem, in which a hybrid genetic algorithm and heuristic procedures are combined. The effectiveness of the proposed approach is validated by means of various problem instances. We observe that the coordination of production and green transportation has a large effect on the overall supply chain sustainability, which can reduce the total supply chain cost by 9.60% to 21.90%.

Product carbon footprint assessment supporting the green supply chain construction in household appliance manufacturers

Science.gov (United States)

Chen, Jianhua; Sun, Liang; Guo, Huiting

2017-11-01

Supply chain carbon emission is one of the factors considered in the green supply chain management. A method was designed to support the green supply chain measures based on the carbon footprint assessment for products. A research for 3 typical household appliances carbon footprint assessment was conducted to explore using product carbon footprint assessment method to guide the green supply chain management of the manufacturers. The result could reflect the differences directions on green supply chain management of manufacturers of washing machine, air conditioner and microwave, respectively That is, the washing machine manufacturer should pay attention to the low carbon activities in upstream suppliers in highest priority, and also the promotion of product energy efficiency. The air conditioner manufacturer should pay attention to the product energy efficiency increasing in highest priority, and the improvement of refrigerant to decrease its GWP. And the microwave manufacture could only focus on the energy efficiency increasing because it contributes most of the carbon emission to its carbon footprint. Besides, the representativeness of product and the applicability of the method were also discussed. As the manufacturer could master the technical information on raw material and components of its products to conduct the product carbon footprint assessment, this method could help the manufacturer to identify the effective green supply chain measures in the preliminary stage.

Monitoring Acidophilic Microbes with Real-Time Polymerase Chain Reaction (PCR) Assays

Energy Technology Data Exchange (ETDEWEB)

Frank F. Roberto

2008-08-01

Many techniques that are used to characterize and monitor microbial populations associated with sulfide mineral bioleaching require the cultivation of the organisms on solid or liquid media. Chemolithotrophic species, such as Acidithiobacillus ferrooxidans and Leptospirillum ferrooxidans, or thermophilic chemolithotrophs, such as Acidianus brierleyi and Sulfolobus solfataricus can grow quite slowly, requiring weeks to complete efforts to identify and quantify these microbes associated with bioleach samples. Real-time PCR (polymerase chain reaction) assays in which DNA targets are amplified in the presence of fluorescent oligonucleotide primers, allowing the monitoring and quantification of the amplification reactions as they progress, provide a means of rapidly detecting the presence of microbial species of interest, and their relative abundance in a sample. This presentation will describe the design and use of such assays to monitor acidophilic microbes in the environment and in bioleaching operations. These assays provide results within 2-3 hours, and can detect less than 100 individual microbial cells.

Colorimetric Detection of Specific DNA Segments Amplified by Polymerase Chain Reactions

Science.gov (United States)

Kemp, David J.; Smith, Donald B.; Foote, Simon J.; Samaras, N.; Peterson, M. Gregory

1989-04-01

The polymerase chain reaction (PCR) procedure has many potential applications in mass screening. We describe here a general assay for colorimetric detection of amplified DNA. The target DNA is first amplified by PCR, and then a second set of oligonucleotides, nested between the first two, is incorporated by three or more PCR cycles. These oligonucleotides bear ligands: for example, one can be biotinylated and the other can contain a site for a double-stranded DNA-binding protein. After linkage to an immobilized affinity reagent (such as a cloned DNA-binding protein, which we describe here) and labeling with a second affinity reagent (for example, avidin) linked to horseradish peroxidase, reaction with a chromogenic substrate allows detection of the amplified DNA. This amplified DNA assay (ADA) is rapid, is readily applicable to mass screening, and uses routine equipment. We show here that it can be used to detect human immunodeficiency virus sequences specifically against a background of human DNA.

Reaction of 3-Amino-1,2,4-Triazole with Diethyl Phosphite and Triethyl Orthoformate: Acid-Base Properties and Antiosteoporotic Activities of the Products

Directory of Open Access Journals (Sweden)

Patrycja Miszczyk

2017-02-01

Full Text Available The reaction of diethyl phosphite with triethyl orthoformate and a primary amine followed by hydrolysis is presented, and the reaction was suitable for the preparation of (aminomethylenebisphosphonates. 3-Amino-1,2,4-triazole was chosen as an interesting substrate for this reaction because it possesses multiple groups that can serve as the amino component in the reaction—namely, the side-chain and triazole amines. This substrate readily forms 1,2,4-triazolyl-3-yl-aminomethylenebisphosphonic acid (compound 1 as a major product, along with N-ethylated bisphosphonates as side products. The in vitro antiproliferative effects of the synthesized aminomethylenebisphosphonic acids against J774E macrophages were determined. These compounds exhibit similar activity to zoledronic acid and higher activity than incadronic acid.

Development, validation, and standardization of polymerase chain reaction-based detection of E-coli O157

DEFF Research Database (Denmark)

Abdulmawjood, A.; Bulte, M.; Roth, S.

2004-01-01

A diagnostic polymerase chain reaction assay was developed for the detection of E. coli O157 as the first part of a multicenter validation and standardization project. The assay is based on amplification of sequences of the rfbE O157 gene and includes an internal amplification control. The select...

76 FR 41525 - Hewlett Packard Global Parts Supply Chain, Global Product Life Cycles Management Unit Including...

Science.gov (United States)

2011-07-14

... Parts Supply Chain, Global Product Life Cycles Management Unit Including Teleworkers Reporting to... workers of Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit...). Since eligible workers of Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles...

Brazilian chicken meat production chain:a 10-year overview

Directory of Open Access Journals (Sweden)

IA Nääs

2015-03-01

Full Text Available Brazil is the world's largest broiler meat exporter. Health control, knowledge and technology, as well as the natural aspects of the country are pointed out as the keys for the success of that product in the market. Brazilian broiler production grew significantly in the last decade; it creates jobs and has a significant social role in Brazilian economy. This study aimed at evaluating the Brazilian broiler meat supply chain from 2000 to 2010 using the social network analysis (SNA. Data from governmental and private sources were organized and analyzed. The focus of this study was the broiler production supply chain segment involving the hatchery, the broiler farm, the feed mill, the processing plant, and the government. The inputs considered were one-day-old chicks, pullet, feedstuff, and the infrastructure; and the outputs were broiler meat and taxes paid. The software UCINET was applied for calculating the structural attributes and indicators of the network. Results showed a relatively disorganized network in 2000 with the strongest tie between the farmer and the processing plant. The structural organization of the network improved until 2010. The density of the ties in the broiler meat production network increased steadily from 2000 to 2010 within a vertical cohesive supply chain structure. The success of Brazilian broiler meat production is attributed to the abundance of land, fertile soil, favorable climate, and the effort and investments in research and development by innovative companies in the last few years. The results of the present study showed that Brazilian broiler production evolved positively in the last ten years, and it was weakly influenced by international challenges.

Value Chain Structures that Define European Cellulosic Ethanol Production

Directory of Open Access Journals (Sweden)

Jay Sterling Gregg

2017-01-01

Full Text Available Production of cellulosic ethanol (CE has not yet reached the scale envisaged by the literature and industry. This study explores CE production in Europe to improve understanding of the motivations and barriers associated with this situation. To do this, we conduct a case study-based analysis of CE production plants across Europe from a global value chain (GVC perspective. We find that most CE production plants in the EU focus largely on intellectual property and are therefore only at the pilot or demonstration scale. Crescentino, the largest CE production facility in Europe, is also more interested in technology licensing than producing ethanol. Demonstration-scale plants tend to have a larger variety of feedstocks, whereas forestry-based plants have more diversity of outputs. As scale increases, the diversity of feedstocks and outputs diminishes, and firms struggle with feedstock provisioning, global petroleum markets and higher financial risks. We argue that, to increase CE production, policies should consider value chains, promote the wider bio-economy of products and focus on economies of scope. Whereas the EU and its member states have ethanol quotas and blending targets, a more effective policy would be to seek to reduce the risks involved in financing capital projects, secure feedstock provisioning and support a diversity of end products.

RAPID MONITORING BY QUANTITATIVE POLYMERASE CHAIN REACTION FOR PATHOGENIC ASPERGILLUS DURING CARPET REMOVAL FROM A HOSPITAL

Science.gov (United States)

Monitoring for pathogenic Aspergillus species using a rapid, highly sensitive, quantitative polumerase chain reaction technique during carpet removal in a burn unit provided data which allowed the patients to be safely returned to the re-floored area sooner than if only conventio...

Studies on the production of branched-chain alcohols in engineered Ralstonia eutropha

Energy Technology Data Exchange (ETDEWEB)

Lu, Jingnan [Massachusetts Institute of Technology, Cambridge, MA (United States). Dept. of Chemistry; Brigham, Christopher J.; Gai, Claudia S. [Massachusetts Institute of Technology, Cambridge, MA (United States). Dept. of Biology; Sinskey, Anthony J. [Massachusetts Institute of Technology, Cambridge, MA (United States). Dept. of Biology; Massachusetts Institute of Technology, Cambridge, MA (United States). Div. of Health Sciences and Technology; Massachusetts Institute of Technology, Cambridge, MA (United States). Engineering Systems Div.

2012-10-15

Wild-type Ralstonia eutropha H16 produces polyhydroxybutyrate (PHB) as an intracellular carbon storage material during nutrient stress in the presence of excess carbon. In this study, the excess carbon was redirected in engineered strains from PHB storage to the production of isobutanol and 3-methyl-1-butanol (branched-chain higher alcohols). These branched-chain higher alcohols can directly substitute for fossil-based fuels and be employed within the current infrastructure. Various mutant strains of R. eutropha with isobutyraldehyde dehydrogenase activity, in combination with the overexpression of plasmid-borne, native branched-chain amino acid biosynthesis pathway genes and the overexpression of heterologous ketoisovalerate decarboxylase gene, were employed for the biosynthesis of isobutanol and 3-methyl-1-butanol. Production of these branched-chain alcohols was initiated during nitrogen or phosphorus limitation in the engineered R. eutropha. One mutant strain not only produced over 180 mg/L branched-chain alcohols in flask culture, but also was significantly more tolerant of isobutanol toxicity than wild-type R. eutropha. After the elimination of genes encoding three potential carbon sinks (ilvE, bkdAB, and aceE), the production titer improved to 270 mg/L isobutanol and 40 mg/L 3-methyl-1-butanol. Semicontinuous flask cultivation was utilized to minimize the toxicity caused by isobutanol while supplying cells with sufficient nutrients. Under this semicontinuous flask cultivation, the R. eutropha mutant grew and produced more than 14 g/L branched-chain alcohols over the duration of 50 days. These results demonstrate that R. eutropha carbon flux can be redirected from PHB to branched-chain alcohols and that engineered R. eutropha can be cultivated over prolonged periods of time for product biosynthesis. (orig.)

The roles of productivity and ecosystem size in determining food chain length in tropical terrestrial ecosystems.

Science.gov (United States)

Young, Hillary S; McCauley, Douglas J; Dunbar, Robert B; Hutson, Michael S; Ter-Kuile, Ana Miller; Dirzo, Rodolfo

2013-03-01

Many different drivers, including productivity, ecosystem size, and disturbance, have been considered to explain natural variation in the length of food chains. Much remains unknown about the role of these various drivers in determining food chain length, and particularly about the mechanisms by which they may operate in terrestrial ecosystems, which have quite different ecological constraints than aquatic environments, where most food chain length studies have been thus far conducted. In this study, we tested the relative importance of ecosystem size and productivity in influencing food chain length in a terrestrial setting. We determined that (1) there is no effect of ecosystem size or productive space on food chain length; (2) rather, food chain length increases strongly and linearly with productivity; and (3) the observed changes in food chain length are likely achieved through a combination of changes in predator size, predator behavior, and consumer diversity along gradients in productivity. These results lend new insight into the mechanisms by which productivity can drive changes in food chain length, point to potential for systematic differences in the drivers of food web structure between terrestrial and aquatic systems, and challenge us to consider how ecological context may control the drivers that shape food chain length.

Detection and Identification of Bursaphelenchus Species with DNA Fingerprinting and Polymerase Chain Reaction

OpenAIRE

Harmey, Judith H.; Harmey, Matthew A.

1993-01-01

We have evaluated the potential of DNA-based methods to identify and differentiate Bursaphelenchus spp. and isolates. The isolation of a DNA probe, designated X14, and development of a DNA fingerprinting method for the identification and differentiation of Bursaphelenchus species and strains is described. Polymerase chain reaction (PCR) amplification of DNA isolated from Bursaphelenchus species using two primers derived from the sequence of the cloned repetitive DNA fragment X14 resulted in m...

Rapid Detection Of Escherichia coli Enterohemorragic (EHEC) Bacteria by PCR (Polymerase Chain Reaction) methods

International Nuclear Information System (INIS)

Sudrajat, Dadang; R, Maria Lina; Suhadi, F.

2000-01-01

A polymerase Chain Reaction (PCR) assay for detect presence of enterohemmoragic Eschericha coli O157:H7 was carried out. DNA was extracted from bacterial cells with CTBA-phenol-chloroform and precipitated with isopropanol. To test sensitivity of PCR amplifies reaction, serial dilutions of E. coli DNA solution were prepared bwtween 1 mu g-1 ng/mu l. A single pair oligonucleotide primer SLTI-F and SLTI-R derived from shiga-like-toxin genes was used in amplification method. The results shows that 1 ng/mu l of E. coli DNA could be detected using the primers SLTI-F and SLTI-R with the position of 140 bp DNA fragment

Primers for polymerase chain reaction to detect genomic DNA of Toxocara canis and T. cati.

Science.gov (United States)

Wu, Z; Nagano, I; Xu, D; Takahashi, Y

1997-03-01

Primers for polymerase chain reaction to amplify genomic DNA of both Toxocara canis and T. cati were constructed by adapting cloning and sequencing random amplified polymorphic DNA. The primers are expected to detect eggs and/or larvae of T. canis and T. cati, both of which are known to cause toxocariasis in humans.

Effective use of product quality information in food supply chain logistics

NARCIS (Netherlands)

Rijpkema, W.A.

2014-01-01

Food supply chains have inherent characteristics, such as variability in product quality and quality decay, which put specific demands on logistics decision making. Furthermore, food supply chain organization and control has changed significantly in the past decades by factors such as scale

Spread and epidemiology of Clostridium difficile polymerase chain reaction ribotype 027/toxinotype III in The Netherlands

NARCIS (Netherlands)

Goorhuis, A.; van der Kooi, T.; Vaessen, N.; Dekker, F. W.; van den Berg, R.; Harmanus, C.; van den Hof, S.; Notermans, D. W.; Kuijper, E. J.

2007-01-01

After reports of emerging outbreaks in Canada and the United States, Clostridium difficile-associated disease (CDAD) due to polymerase chain reaction ribotype 027 was detected in 2 medium-to-large hospitals in The Netherlands in 2005. National surveillance was initiated to investigate the spread and

Evaluation of medium-chain-length polyhydroxyalkanoate production by Pseudomonas putida LS46 using biodiesel by-product streams.

Science.gov (United States)

Fu, Jilagamazhi; Sharma, Umesh; Sparling, Richard; Cicek, Nazim; Levin, David B

2014-07-01

Medium-chain-length polyhydroxyalkanoate (mcl-PHA) production by Pseudomonas putida LS46 was analyzed in shake-flask-based batch reactions, using pure chemical-grade glycerol (PG), biodiesel-derived "waste" glycerol (WG), and biodiesel-derived "waste" free fatty acids (WFA). Cell growth, substrate consumption, mcl-PHA accumulation within the cells, and the monomer composition of the synthesized biopolymers were monitored. The patterns of mcl-PHA synthesis in P. putida LS46 cells grown on PG and WG were similar but differed from that of cells grown with WFA. Polymer accumulation in glycerol-based cultures was stimulated by nitrogen limitation and plateaued after 48 h in both PG and WG cultures, with a total accumulation of 17.9% cell dry mass and 16.3% cell dry mass, respectively. In contrast, mcl-PHA synthesis was independent of nitrogen concentration in P. putida LS46 cells cultured with WFA, which accumulated to 29% cell dry mass. In all cases, the mcl-PHAs synthesized consisted primarily of 3-hydroxyoctanoate (C(8)) and 3-hydroxydecanoate (C(10)). WG and WFA supported similar or greater cell growth and mcl-PHA accumulation than PG under the experimental conditions used. These results suggest that biodiesel by-product streams could be used as low-cost carbon sources for sustainable mcl-PHA production.

Mathematical analysis of the impact mechanism of information platform on agro-product supply chain and agro-product competitiveness

Directory of Open Access Journals (Sweden)

Jiang Qi-Jie

2017-04-01

Full Text Available How to optimize agro-product supply chain to promote its operating efficiency so as to enhance the competitiveness of regional agricultural products has posed a problem to academic circles, business circles and governments of various levels. One way to solve this problem is to introduce an information platform into the supply chain, which this essay focuses on. Firstly, a review of existing research findings concerning the agro-product competitiveness, agro-product supply chain (ASC and information platform was given. Secondly, we constructed a mathematical model to analyze the impact of information platform on the bullwhip effect in ASC. Thirdly, another mathematical model was constructed to help compare and analyze the impact of information platform on information acquisition of members in ASC. The research results show that the implantation of information platform can mitigate the bullwhip effect in ASC, and members can determine order amount or production more close to the actual market demand. And also the information platform can reduce the time for members in ASC to get information from other members. Besides, information platform can help ASC to alleviate information asymmetry among upstream and downstream members. Furthermore, researches about the operating mechanism and pattern, technical feature and running structure of the information platform, along with their impacts on agro-product supply chain and the competitiveness of agricultural products need to be advanced.

Mathematical analysis of the impact mechanism of information platform on agro-product supply chain and agro-product competitiveness

Science.gov (United States)

Jiang, Qi-Jie; Jin, Mao-Zhu; Ren, Pei-Yu

2017-04-01

How to optimize agro-product supply chain to promote its operating efficiency so as to enhance the competitiveness of regional agricultural products has posed a problem to academic circles, business circles and governments of various levels. One way to solve this problem is to introduce an information platform into the supply chain, which this essay focuses on. Firstly, a review of existing research findings concerning the agro-product competitiveness, agro-product supply chain (ASC) and information platform was given. Secondly, we constructed a mathematical model to analyze the impact of information platform on the bullwhip effect in ASC. Thirdly, another mathematical model was constructed to help compare and analyze the impact of information platform on information acquisition of members in ASC. The research results show that the implantation of information platform can mitigate the bullwhip effect in ASC, and members can determine order amount or production more close to the actual market demand. And also the information platform can reduce the time for members in ASC to get information from other members. Besides, information platform can help ASC to alleviate information asymmetry among upstream and downstream members. Furthermore, researches about the operating mechanism and pattern, technical feature and running structure of the information platform, along with their impacts on agro-product supply chain and the competitiveness of agricultural products need to be advanced.

An integrated one-chip-sensor system for microRNA quantitative analysis based on digital droplet polymerase chain reaction

Science.gov (United States)

Tsukuda, Masahiko; Wiederkehr, Rodrigo Sergio; Cai, Qing; Majeed, Bivragh; Fiorini, Paolo; Stakenborg, Tim; Matsuno, Toshinobu

2016-04-01

A silicon microfluidic chip was developed for microRNA (miRNA) quantitative analysis. It performs sequentially reverse transcription and polymerase chain reaction in a digital droplet format. Individual processes take place on different cavities, and reagent and sample mixing is carried out on a chip, prior to entering each compartment. The droplets are generated on a T-junction channel before the polymerase chain reaction step. Also, a miniaturized fluorescence detector was developed, based on an optical pick-up head of digital versatile disc (DVD) and a micro-photomultiplier tube. The chip integrated in the detection system was tested using synthetic miRNA with known concentrations, ranging from 300 to 3,000 templates/µL. Results proved the functionality of the system.

Identification of aflatoxigenic fungi using polymerase chain reaction-based assay

Directory of Open Access Journals (Sweden)

Šošo Vladislava M.

2014-01-01

Full Text Available As the aflatoxins represent a health-risk for humans because of their proven carcinogenicity, food-borne fungi that produce them as secondary metabolites, mainly Aspergillus flavus and Aspergillus parasiticus, have to be isolated and identified. The best argument for identifying problem fungi is that it indicates control points within the food system as part of a hazard analysis critical control point (HACCP approach. This assumes there is a close link between fungus and toxin. Conventional methods for isolation and identification of fungi are time consuming and require admirably dedicated taxonomists. Hence, it is imperative to develop methodologies that are relatively rapid, highly specific and as an alternative to the existing methods. The polymerase chain reaction (PCR facilitates the in vitro amplification of the target sequence. The main advantages of PCR is that organisms need not be cultured, at least not for a long time, prior to their detection, target DNA can be detected even in a complex mixture, no radioactive probes are required, it is rapid, sensitive and highly versatile. The gene afl-2 has been isolated and shown to regulate aflatoxin biosynthesis in A. flavus. Also, the PCR reaction was targeted against aflatoxin synthesis regulatory gene (aflR1 since these genes are nearly identical in A. flavus and A. parasiticus in order to indicate the possibility of detection of both the species with the same PCR system (primers/reaction. [Projekat Ministarstva nauke Republike Srbije, br. III46009

An Integrated Decision Making Framework for Automotive Product Development with the Supply Chain

OpenAIRE

Hasan, Syed M.; Gao, James; Wasif, Muhammad; Iqbal, Syed A.

2014-01-01

It is evidenced that manufacturing firms in order to be more competitive in market, must continuously update their product offers in order to better satisfy the customers’ requirements. Management should use the supply chain features more frequently, as the increased rate of product introductions, demands more from a business and needs more efforts to deliver the new products effectively and efficiently. To deliver the products at the targeted cost, time, and quality, the supply chain must be...

The need for integration in the supply chain of vegetable production

DEFF Research Database (Denmark)

Deleuran, Lise Christina; Jelsøe, Erling; Boelt, Birte

2008-01-01

of quality seed. Quality seed also creates the base for quality products which is of increasing interest for the conscious consumers. In all, varying reasons for looking further into how supply chains function. The supply chain within vegetables is represented by seed producers, seed companies, salad...

Modes of environmental management in transnational product chains

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Jørgensen, Ulrik; Hendriksen, Kåre

2007-01-01

opportunities by being present in the country where the sourcing takes place. The paper discusses different modes of environmental management in such transnational product chains based on a number of cases, and explores the links to the business strategy of the companies and national and international......Many companies in industrialised countries are outsourcing production or sourcing materials and products in countries with lower environmental protection than the companies’ countries of origin. The background is access to special materials and/or lower costs, but some times also the market...

Diagnostic performance of fecal quantitative real-time polymerase chain reaction for detection of Lawsonia intracellularis–associated proliferative enteropathy in nursery pigs

DEFF Research Database (Denmark)

Pedersen, Ken Steen; Stege, Helle; Jensen, Tim Kåre

2013-01-01

Quantitative polymerase chain reaction (qPCR) tests for detection and quantification of Lawsonia intracellularis in feces from pigs have been developed. The objective of the current study was to evaluate the diagnostic performance of a fecal qPCR test for detection of nursery pigs with L. intrace......Quantitative polymerase chain reaction (qPCR) tests for detection and quantification of Lawsonia intracellularis in feces from pigs have been developed. The objective of the current study was to evaluate the diagnostic performance of a fecal qPCR test for detection of nursery pigs with L...

The impacts of product design changes on supply chain risk: a case study

OpenAIRE

Lin, Yong; Zhou, Li

2011-01-01

Purpose: The main purpose of this paper is to address the impact of product design changes on supply chain risk, and to identify the supply chain risk dimensions in the Chinese special-purpose vehicle (SPV) industry in the context of product design change.\\ud \\ud Design/methodology/approach: Case study methodology is adopted to describe the current situation of supply chain risk management in the Chinese SPV industry. Data are mainly collected from in-depth semi-structured interviews, and a c...

DNA-based identification of spices: DNA isolation, whole genome amplification, and polymerase chain reaction.

Science.gov (United States)

Focke, Felix; Haase, Ilka; Fischer, Markus

2011-01-26

Usually spices are identified morphologically using simple methods like magnifying glasses or microscopic instruments. On the other hand, molecular biological methods like the polymerase chain reaction (PCR) enable an accurate and specific detection also in complex matrices. Generally, the origins of spices are plants with diverse genetic backgrounds and relationships. The processing methods used for the production of spices are complex and individual. Consequently, the development of a reliable DNA-based method for spice analysis is a challenging intention. However, once established, this method will be easily adapted to less difficult food matrices. In the current study, several alternative methods for the isolation of DNA from spices have been developed and evaluated in detail with regard to (i) its purity (photometric), (ii) yield (fluorimetric methods), and (iii) its amplifiability (PCR). Whole genome amplification methods were used to preamplify isolates to improve the ratio between amplifiable DNA and inhibiting substances. Specific primer sets were designed, and the PCR conditions were optimized to detect 18 spices selectively. Assays of self-made spice mixtures were performed to proof the applicability of the developed methods.

Polymerase chain reaction detection of retinoblastoma gene deletions in paraffin-embedded mouse lung adenocarcinomas

International Nuclear Information System (INIS)

Churchill, M.E.; Gemmell, M.A.; Woloschak, G.E.

1991-01-01

A Polymerase chain reaction (PCR) technique was used to detect deletions in the mouse retinoblastoma (mRb) gene using microtomed sections from paraffin-embedded radiation-induced and spontaneous tumors as the DNA source. Six mRb gene exon fragments were amplified in a 40-cycle, 3-temperature PCR protocol. Absence of any of these fragments relative to control PCR products on a Southern blot indicated a deletion of that portion of the mRb gene. Tumors chosen for analysis were lung adenocarcinomas that were judged to be the cause of death. Spontaneous tumors as well as those from irradiated mice (569 cGy of 60 Co γ rays or 60 cGy of JANUS neutrons) were analyzed. Tumors in six neutron-irradiated mice also had no mRb deletions. However, one of six tumors from γ-irradiated mice and 6 of 18 spontaneous tumors from unirradiated mice showed a deletion in one or both mRb alleles. All deletions detected were in the 5' region of the mRb gene

Effects of climate change on food safety hazards in the dairy production chain

NARCIS (Netherlands)

Spiegel, van der M.; Fels-Klerx, van der H.J.; Marvin, H.J.P.

2012-01-01

The aim of this study is to analyse the effect of climate change on emerging food safety hazards in the dairy production chain. For this purpose, a holistic approach was used to select critical factors from inside and outside the production chain that are affected by climatic factors. An expert

[REAL TIME POLYMERASE CHAIN REACTION IN TULAREMIA LABORATORY DIAGNOSTICS].

Science.gov (United States)

Kormilitsyna, M I; Mescheryakova, I S; Mikhailova, T V; Dobrovolsky, A A

2015-01-01

Enhancement of tularemia laboratory diagnostics by F. tularensis DNA determination in blood sera of patients using real time polymerase chain reaction (RT-PCR). 39 blood sera of patients obtained during transmissive epidemic outbreak of tularemia in Khanty-Mansiysk in 2013 were studied in agglutination reaction, passive hemagglutination, RT-PCR. Specific primers and fluorescent probes were used: ISFTu2F/R+ISFTu2P, Tu14GF/R+tul4-PR2. Advantages of using RT-PCR for early diagnostics of tularemia, when specific antibodies are not detected using traditional immunologic methods, were established. Use of a combination of primers and ISFTu2F/R+ISFTu2P probe allowed to detect F. tularensis DNA in 100% of sera, whereas Tul4G F/R+tul4-PR2 combination--92% of sera. The data were obtained when DNA was isolated from sera using "Proba Rapid" express method. Clinical-epidemiologic diagnosis oftularemia was confirmed by both immune-serologic and RT-PCR methods when sera were studied 3-4 weeks after the onset of the disease. RT-PCR with ISFTu2F/R primers and fluorescent probe ISFTu2P, having high sensitivity and specificity, allows to determine F. tularensis DNA in blood sera of patients at both the early stage and 3-4 weeks after the onset of the disease.

HLA-DPB1 typing with polymerase chain reaction and restriction fragment length polymorphism technique in Danes

DEFF Research Database (Denmark)

Hviid, Thomas Vauvert F.; Madsen, Hans O; Morling, Niels

1992-01-01

We have used the polymerase chain reaction (PCR) in combination with the restriction fragment length polymorphism (RFLP) technique for HLA-DBP1 typing. After PCR amplification of the polymorphic second exon of the HLA-DPB1 locus, the PCR product was digested with seven allele-specific restriction...... endonucleases: RsaI, FokI, ApaI, SacI, BstUI, EcoNI, and DdeI, and the DNA fragments were separated by electrophoresis in agarose gels. Altogether, 71 individuals were investigated and 16 different HLA-DPB1 types were observed in 26 different heterozygotic combinations, as well as five possible homozygotes....... Four heterozygotes could not be unequivocally typed with the PCR-RFLP method. The HLA-DPB1 typing results obtained with the PCR-RFLP method were compared with the typing results obtained with PCR allele-specific oligonucleotides (PCR-ASO) in 50 individuals. The results obtained with the two methods...

CHAINS-PC, Decay Chain Atomic Densities

International Nuclear Information System (INIS)

1994-01-01

1 - Description of program or function: CHAINS computes the atom density of members of a single radioactive decay chain. The linearity of the Bateman equations allows tracing of interconnecting chains by manually accumulating results from separate calculations of single chains. Re-entrant loops can be treated as extensions of a single chain. Losses from the chain are also tallied. 2 - Method of solution: The Bateman equations are solved analytically using double-precision arithmetic. Poles are avoided by small alterations of the loss terms. Multigroup fluxes, cross sections, and self-shielding factors entered as input are used to compute the effective specific reaction rates. The atom densities are computed at any specified times. 3 - Restrictions on the complexity of the problem: Maxima of 100 energy groups, 100 time values, 50 members in a chain

Emergence of Clostridium difficile infection due to a new hypervirulent strain, polymerase chain reaction ribotype 078

NARCIS (Netherlands)

Goorhuis, Abraham; Bakker, Dennis; Corver, Jeroen; Debast, Sylvia B.; Harmanus, Celine; Notermans, Daan W.; Bergwerff, Aldert A.; Dekker, Frido W.; Kuijper, Ed J.

2008-01-01

Since 2005, an increase in the prevalence of Clostridium difficile infection (CDI) due to polymerase chain reaction ribotype 078 has been noticed in The Netherlands. This strain has also been identified as the predominant strain in pigs and calves. CDI caused by type 078 was studied in relation to

MRSA CC398 in the pig production chain

NARCIS (Netherlands)

Broens, E.M.; Graat, E.A.M.; Wolf, van der P.J.; Giessen, van de A.W.; Duijkeren, van E.; Wagenaar, J.A.; Nes, van A.; Mevius, D.J.; Jong, de M.C.M.

2011-01-01

In 2005, a distinct clone of methicillin resistant Staphylococcus aureus (MRSA CC398) was found in pigs and people in contact with pigs. The structure of the pig production chain in high technology pig husbandry enables pathogens to spread during animal trading, with an increasing prevalence in

Polymerase chain reaction: A molecular diagnostic tool in periodontology

Science.gov (United States)

Maheaswari, Rajendran; Kshirsagar, Jaishree Tukaram; Lavanya, Nallasivam

2016-01-01

This review discusses the principles of polymerase chain reaction (PCR) and its application as a diagnostic tool in periodontology. The relevant MEDLINE and PubMed indexed journals were searched manually and electronically by typing PCR, applications of PCR, PCR in periodontics, polymorphism studies in periodontitis, and molecular techniques in periodontology. The searches were limited to articles in English language and the articles describing PCR process and its relation to periodontology were collected and used to prepare a concise review. PCR has now become a standard diagnostic and research tool in periodontology. Various studies reveal that its sensitivity and specificity allow it as a rapid, efficient method of detecting, identifying, and quantifying organism. Different immune and inflammatory markers can be identified at the mRNA expression level, and also the determination of genetic polymorphisms, thus providing the deeper insight into the mechanisms underlying the periodontal disease. PMID:27143822

Real-Time Polymerase Chain Reaction: Applications in Diagnostic Microbiology

Directory of Open Access Journals (Sweden)

Kordo B. A. Saeed

2013-11-01

Full Text Available The polymerase chain reaction (PCR has revolutionized the detection of DNA and RNA. Real-Time PCR (RT-PCR is becoming the gold standard test for accurate, sensitive and fast diagnosis for a large range of infectious agents. Benefits of this procedure over conventional methods for measuring RNA include its sensitivity, high throughout and quantification. RT-PCR assays have advanced the diagnostic abilities of clinical laboratories particularly microbiology and infectious diseases. In this review we would like to briefly discuss RT-PCR in diagnostic microbiology laboratory, beginning with a general introduction to RT-PCR and its principles, setting up an RT PCR, including multiplex systems and the avoidance and remediation of contamination issues. A segment of the review would be devoted to the application of RT-PCR in clinical practice concentrating on its role in the diagnosis and treatment of infectious diseases.

Chain Map for 'Koopmans Meel' [production of flour]; Ketenmap Koopmans Meel

Energy Technology Data Exchange (ETDEWEB)

Greeve, J. [E kwadraat advies, Leeuwarden (Netherlands)

2010-06-15

This chain map provides insight into energy consumption and greenhouse gas emissions of the entire chain of the flour produced by Koopmans Flour (from production to consumption). With this knowledge, a start can be made to make the bread production chain more sustainable [Dutch] Deze ketenkaart verschaft inzicht in het energieverbruik en de emissie van broeikasgassen van de gehele keten van de door Koopmans Meel geproduceerde bloem (van productie tot en met consumptie). Met deze kennis kan een begin gemaakt worden van de verduurzaming van de broodketen.

Determination of the number of radicals in the initial chain reactions by mathematical methods

Directory of Open Access Journals (Sweden)

Pejović Branko B.

2009-01-01

Full Text Available Starting from the fact that the real mechanism in a chemical equation takes places through a certain number of radicals which participate in simultaneous reactions and initiate chain reactions according to a particular pattern, the aim of this study is to determine their number in the first couple of steps of the reaction. Based on this, the numbers of radicals were determined in the general case, in the form of linear difference equations, which, by certain mathematical transformations, were reduced to one equation that satisfies a particular numeric series, entirely defined if its first members are known. The equation obtained was solved by a common method developed in the theory of numeric series, in which its solutions represent the number of radicals in an arbitrary step of the reaction observed, in the analytical form. In the final part of the study, the method was tested and verified using two characteristic examples from general chemistry. The study also gives a suggestion of a more efficient procedure by reducing the difference equation to a lower order.

An integrated multi-stage supply chain inventory model with imperfect production process

Directory of Open Access Journals (Sweden)

Soumita Kundu

2015-09-01

Full Text Available This paper deals with an integrated multi-stage supply chain inventory model with the objective of cost minimization by synchronizing the replenishment decisions for procurement, production and delivery activities. The supply chain structure examined here consists of a single manufacturer with multi-buyer where manufacturer orders a fixed quantity of raw material from outside suppliers, processes the materials and delivers the finished products in unequal shipments to each customer. In this paper, we consider an imperfect production system, which produces defective items randomly and assumes that all defective items could be reworked. A simple algorithm is developed to obtain an optimal production policy, which minimizes the expected average total cost of the integrated production-inventory system.

Production of radioactive nuclides in inverse reaction kinematics

International Nuclear Information System (INIS)

Traykov, E.; Rogachevskiy, A.; Bosswell, M.; Dammalapati, U.; Dendooven, P.; Dermois, O.C.; Jungmann, K.; Onderwater, C.J.G.; Sohani, M.; Willmann, L.; Wilschut, H.W.; Young, A.R.

2007-01-01

Efficient production of short-lived radioactive isotopes in inverse reaction kinematics is an important technique for various applications. It is particularly relevant when the isotope of interest is only a few nucleons away from a stable isotope. In this article production via charge exchange and stripping reactions in combination with a magnetic separator is explored. The relation between the separator transmission efficiency, the production yield, and the choice of beam energy is discussed. The results of some exploratory experiments will be presented

Correlations between reaction product yields as a tool for probing heavy-ion reaction scenarios

International Nuclear Information System (INIS)

Gawlikowicz, W.; Agnihotri, D. K.; Baldwin, S. A.; Schroeder, W. U.; Toke, J.; Charity, R. J.; Sarantites, D. G.; Sobotka, L. G.; Souza, R. T. de; Barczyk, T.; Grotowski, K.; Micek, S.; Planeta, R.; Sosin, Z.

2010-01-01

Experimental multidimensional joint distributions of neutrons and charged reaction products were analyzed for 136 Xe + 209 Bi reactions at E/A=28, 40, and 62 MeV and were found to exhibit several different types of prominent correlation patterns. Some of these correlations have a simple explanation in terms of the system excitation energy and pose little challenge to most statistical decay theories. However, several other types of correlation patterns are difficult to reconcile with some, but not other, possible reaction scenarios. In this respect, correlations between the average atomic numbers of intermediate-mass fragments, on the one hand, and light particle multiplicities, on the other, are notable. This kind of multiparticle correlation provides a useful tool for probing reaction scenarios, which is different from the traditional approach of interpreting inclusive yields of individual reaction products.

Determining Role of the Chain Mechanism in the Temperature Dependence of the Gas-Phase Rate of Combustion Reactions

Science.gov (United States)

Azatyan, V. V.; Bolod'yan, I. A.; Kopylov, N. P.; Kopylov, S. N.; Prokopenko, V. M.; Shebeko, Yu. N.

2018-05-01

It is shown that the strong dependence of the rate of gas-phase combustion reactions on temperature is determined by the high values of the reaction rate constants of free atoms and radicals. It is established that with a branched chain mechanism, a special role in the reaction rate temperature dependence is played by positive feedback between the concentrations of active intermediate species and the rate of their change. The role of the chemical mechanism in the temperature dependence of the process rate with and without inhibitors is considered.

Supply chain reaction

International Nuclear Information System (INIS)

Snieckus, Darius

2000-01-01

'Logic' (Leading Oil and Gas Industry Competitiveness) is a government-industry supply chain management initiative which aims to improve the competitiveness of the UK's North Sea business by 1 billion UK pounds by 2002 and its export performance by 50% inside 5 years. Much of the article is devoted to the background and views of Logic's chief executive Chris. Freeman. Freeman makes clear that 'unlike Crine, we are not a cost-reduction initiative: that may be one of the outcomes, but we are really focusing on the co-operation side of things'. Logic aims to change the culture of the UK offshore industry through example. Freeman believes that the creation of collaborative success will flag up industry and give credence to Logics objectives

An overview on the Brazilian orange juice production chain

OpenAIRE

Renato Marcio dos Santos; Irenilza de Alencar Nääs; Mario Mollo Neto; Oduvaldo Vendrametto

2013-01-01

Brazil is the world's largest producer of oranges and uses more than 70% of the harvested fruits in the production of juices. The amount of processed orange is growing about 10% per year, confirming the trend of the Brazilian citrus for juice production. This research aimed to investigate the Brazilian orange juice production chain from 2005 to 2009. Data from the amount of frozen juice produced and exported, international price of orange juice, and intermediate transactions were assessed in ...

Supply chain implications of sustainable design strategies for electronics products

OpenAIRE

De Coster, R; Bateman, RJ; Plant, AVC

2012-01-01

Increasing legislative and consumer pressures on manufacturers to improve sustainability necessitates that manufacturers consider the overall life cycle and not be scope restricted in creating products. Product strategies to improve sustainability have design implications as many of the decisions made during the design stage will then determine the environmental performance of the final product. Coordination across the supply chain is potentially beneficial as products with improved energy ef...

Analysis of Product Complexity considering Disruption Cost in Fast Fashion Supply Chain

OpenAIRE

Sardar, Shaheen; Lee, Young Hae

2015-01-01

Outsourcing in the textile industry has been playing an important role in the global economy for six decades. Recently, reshoring is an emerging trend due to various complexities involved in supply chain management. As compared with basic textile and apparel products, fast fashion products are complex in their own way. A single assortment contains several new styles, colors, and sizes with unpredictable demand and urgent deadlines. Numerous assortments run simultaneously in the supply chain. ...

Polymerase chain reaction in unilateral cases of presumed viral anterior uveitis

Directory of Open Access Journals (Sweden)

Shoughy SS

2015-12-01

Full Text Available Samir S Shoughy,1 Hind M Alkatan,2,4 Abdulelah A Al-Abdullah,2 Albarah El-Khani,2 Jolanda DF de Groot-Mijnes,3 Khalid F Tabbara1,4,5 1Department of Ophthalmology, The Eye Center and The Eye Foundation for Research in Ophthalmology, 2Department of Pathology & Laboratory Medicine and Uveitis Division, King Khaled Eye Specialist Hospital, Riyadh, Saudi Arabia; 3Department of Virology and Ophthalmology, University Medical Center Utrecht, Utrecht, the Netherlands; 4Department of Ophthalmology, College of Medicine, King Saud University, Riyadh, Saudi Arabia; 5The Wilmer Ophthalmological Institute of The Johns Hopkins University School of Medicine, Baltimore, MD, USA Background and objectives: Anterior uveitis is the most common form of intraocular inflammation. The main aim of this study was to determine the viral etiology in patients with unilateral cases of anterior uveitis.Patients and methods: A total of 12 consecutive patients with the diagnosis of idiopathic unilateral anterior uveitis were included prospectively. Aqueous specimens were obtained from each patient by anterior chamber paracentesis and subjected to the detection of viral DNA/RNA genome by polymerase chain reaction assay for herpes simplex virus, varicella zoster virus, cytomegalovirus, Epstein–Barr virus, and rubella virus.Results: There were six male and six female patients. The mean age was 43 years, with an age range of 11–82 years. All 12 cases presented with unilateral anterior uveitis. In four (33% patients, polymerase chain reaction was positive for viral genome. Two patients were positive for herpes simplex virus type 1, one patient was positive for cytomegalovirus and one for Epstein–Barr virus.Conclusion: Recent molecular diagnostic assays would help in the identification of the causative agent in patients with unilateral anterior uveitis. Keywords: viral anterior uveitis, PCR, herpes simplex virus, cytomegalovirus, diffuse keratic precipitates, anterior chamber

An integrated supply chain model for new products with imprecise production and supply under scenario dependent fuzzy random demand

Science.gov (United States)

Nagar, Lokesh; Dutta, Pankaj; Jain, Karuna

2014-05-01

In the present day business scenario, instant changes in market demand, different source of materials and manufacturing technologies force many companies to change their supply chain planning in order to tackle the real-world uncertainty. The purpose of this paper is to develop a multi-objective two-stage stochastic programming supply chain model that incorporates imprecise production rate and supplier capacity under scenario dependent fuzzy random demand associated with new product supply chains. The objectives are to maximise the supply chain profit, achieve desired service level and minimise financial risk. The proposed model allows simultaneous determination of optimum supply chain design, procurement and production quantities across the different plants, and trade-offs between inventory and transportation modes for both inbound and outbound logistics. Analogous to chance constraints, we have used the possibility measure to quantify the demand uncertainties and the model is solved using fuzzy linear programming approach. An illustration is presented to demonstrate the effectiveness of the proposed model. Sensitivity analysis is performed for maximisation of the supply chain profit with respect to different confidence level of service, risk and possibility measure. It is found that when one considers the service level and risk as robustness measure the variability in profit reduces.

Chemical Characterization and Reactivity of Fuel-Oxidizer Reaction Product

Science.gov (United States)

David, Dennis D.; Dee, Louis A.; Beeson, Harold D.

1997-01-01

Fuel-oxidizer reaction product (FORP), the product of incomplete reaction of monomethylhydrazine and nitrogen tetroxide propellants prepared under laboratory conditions and from firings of Shuttle Reaction Control System thrusters, has been characterized by chemical and thermal analysis. The composition of FORP is variable but falls within a limited range of compositions that depend on three factors: the fuel-oxidizer ratio at the time of formation; whether the composition of the post-formation atmosphere is reducing or oxidizing; and the reaction or post-reaction temperature. A typical composition contains methylhydrazinium nitrate, ammonium nitrate, methylammonium nitrate, and trace amounts of hydrazinium nitrate and 1,1-dimethylhydrazinium nitrate. Thermal decomposition reactions of the FORP compositions used in this study were unremarkable. Neither the various compositions of FORP, the pure major components of FORP, nor mixtures of FORP with propellant system corrosion products showed any unusual thermal activity when decomposed under laboratory conditions. Off-limit thruster operations were simulated by rapid mixing of liquid monomethylhydrazine and liquid nitrogen tetroxide in a confined space. These tests demonstrated that monomethylhydrazine, methylhydrazinium nitrate, ammonium nitrate, or Inconel corrosion products can induce a mixture of monomethylhydrazine and nitrogen tetroxide to produce component-damaging energies. Damaging events required FORP or metal salts to be present at the initial mixing of monomethylhydrazine and nitrogen tetroxide.

Description of polymerase chain reaction and sequencing DNA Mycobacterium tuberculosis from specimen sputum of tuberculosis patients in Medan

Science.gov (United States)

Lily; Siregar, Y.; Ilyas, S.

2018-03-01

This study purposed to describe the product Polymerase Chain Reaction (PCR) and sequencing of DNA Mycobacterium (M.) tuberculosis from sputum of tuberculosis (TB) patients in Medan. Sputum was collected from patients that diagnosed with pulmonary TB by a physician. Specimen processed by PCR method of Li et al. and sequencing at Macrogen Laboratory. All of 12 product PCR were showed brightness bands at 126 base pair (bp). These results indicated similarity to the study of Li et al. Sequencing analysis showed the presence of a mutation and non-mutation groups of M. tuberculosis. The reference and outcome berange of the mutation and non-mutation of M. tuberculosis were 56-107, 59-85, 60-120 and 63-94, respectively. The percentage bp difference between the outcome and references for mutation and non-mutation were 3.448-6.569and 3.278-7.428%, respectively. In conclusion, the successful amplification of PCR products in a 1.5% agarose gel electrophoresis where all 12 sputa contained rpoB-positive M. tuberculosis and 0.644% difference was found between the outcome with reference bp of the mutation and non-mutation M. tuberculosis groups.

DNA extraction from coral reef sediment bacteria for the polymerase chain reaction.

Science.gov (United States)

Guthrie, J N; Moriarty, D J; Blackall, L L

2000-12-15

A rapid and effective method for the direct extraction of high molecular weight amplifiable DNA from two coral reef sediments was developed. DNA was amplified by the polymerase chain reaction (PCR) using 16S rDNA specific primers. The amplicons were digested with HaeIII, HinP1I and MspI and separated using polyacrylamide gel electrophoresis and silver staining. The resulting amplified ribosomal DNA restriction analysis (ARDRA) patterns were used as a fingerprint to discern differences between the coral reef sediment samples. Results indicated that ARDRA is an effective method for determining differences within the bacterial community amongst different environmental samples.

Highly efficient capillary polymerase chain reaction using an oscillation droplet microreactor

International Nuclear Information System (INIS)

Liu Dayu; Liang Guangtie; Lei Xiuxia; Chen Bin; Wang Wei; Zhou Xiaomian

2012-01-01

Graphical abstract: An oscillation-flow approach using a droplet reactor was developed to fully explore the potential of continuous-flow PCR. By fully utilizing interfacial chemistry, a water-in-oil (w/o) droplet was automatically generated by allowing an oil–water plug to flow through a polytetrafluoroethylene (PTFE) capillary. Due to the movement of aqueous phase relative to the oil phase, the droplet moves further into the middle of the oil plug with increase in migration distance. The resulting droplet was transported spanning the two heating zones and was employed as the reactor of oscillating-flow PCR. Highlights: ► Droplet formation in a capillary. ► Transport the droplet using oscillation-flow. ► Oscillation droplet PCR. ► Improved reaction efficiency. - Abstract: The current work presents the development of a capillary-based oscillation droplet approach to maximize the potential of a continuous-flow polymerase chain reaction (PCR). Through the full utilization of interfacial chemistry, a water-in-oil (w/o) droplet was generated by allowing an oil–water plug to flow along a polytetrafluoroethylene (PTFE) capillary. The w/o droplet functioned as the reactor for oscillating-flow PCR to provide a stable reaction environment, accelerate reagent mixing, and eliminate surface adsorption. The capillary PCR approach proposed in the current research offers high amplification efficiency, fast reaction speed, and easy system control attributable to the oscillation droplet reactor. Experimental results show that the droplet-based micro-PCR assay requires lower reaction volume (2 μL) and shorter reaction time (12 min) compared with conventional PCR methods. Taking the amplification of the New Delhi metallo-beta-lactamase (NDM-1) gene as an example, the present work demonstrates that the oscillation droplet PCR assay is capable of achieving high efficiency up to 89.5% and a detection limit of 10 DNA copies. The miniature PCR protocol developed in the current

Productive chain in a Dairy Agro-Craft Association Ambato, Ecuador

Directory of Open Access Journals (Sweden)

Lidia Rosario Vásconez Gavilanes

2016-06-01

Full Text Available The propose of this research is the analysis of the diary agro-productive chain in the agro-artisanal Association of diary products “El Lindero” and its impact in life conditions of its population.  Nowadays, it has the necessary infrastructure to work as storage center, milk cooling and, cheese elaboration.  In this study, we have identified the actors, the links in the diary chain and the life conditions of families’ members of the “El Lindero” association.  We conclude that the existence of the entity has ameliorated the relationship of its members with other institutions and organizations, something that had influenced the improvement of production conditions and, it has helped in the bargaining of better prices.  This had has a positive impact in income and consequently in the improving life conditions of its associates.

Evaluation of Amplification Targets for the Specific Detection of Bordetella pertussis Using Real-Time Polymerase Chain Reaction

Directory of Open Access Journals (Sweden)

Mohammad Rubayet Hasan

2014-01-01

Full Text Available BACKGROUND: Bordetella pertussis infections continue to be a major public health challenge in Canada. Polymerase chain reaction (PCR assays to detect B pertussis are typically based on the multicopy insertion sequence IS481, which offers high sensitivity but lacks species specificity.

Liquid-Crystalline Ionic Liquids as Ordered Reaction Media for the Diels-Alder Reaction.

Science.gov (United States)

Bruce, Duncan W; Gao, Yanan; Canongia Lopes, José Nuno; Shimizu, Karina; Slattery, John M

2016-11-02

Liquid-crystalline ionic liquids (LCILs) are ordered materials that have untapped potential to be used as reaction media for synthetic chemistry. This paper investigates the potential for the ordered structures of LCILs to influence the stereochemical outcome of the Diels-Alder reaction between cyclopentadiene and methyl acrylate. The ratio of endo- to exo-product from this reaction was monitored for a range of ionic liquids (ILs) and LCILs. Comparison of the endo:exo ratios in these reactions as a function of cation, anion and liquid crystallinity of the reaction media, allowed for the effects of liquid crystallinity to be distinguished from anion effects or cation alkyl chain length effects. These data strongly suggest that the proportion of exo-product increases as the reaction media is changed from an isotropic IL to a LCIL. A detailed molecular dynamics (MD) study suggests that this effect is related to different hydrogen bonding interactions between the reaction media and the exo- and endo-transition states in solvents with layered, smectic ordering compared to those that are isotropic. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

High energy photons production in nuclear reactions

International Nuclear Information System (INIS)

Nifenecker, H.; Pinston, J.A.

1990-01-01

Hard photon production, in nucleus-nucleus collisions, were studied at beam energies between 10 and 125 MeV. The main characteristics of the photon emission are deduced. They suggest that the neutron-proton collisions in the early stage of the reaction are the main source of high energy gamma-rays. An overview of the theoretical approaches is given and compared with experimental results. Theoretical attempts to include the contribution of charged pion exchange currents to photon production, in calculations of proton-nucleus-gamma and nucleus-nucleus-gamma reactions, showed suitable fitting with experimental data

Simulation-optimization model for production planning in the blood supply chain.

Science.gov (United States)

Osorio, Andres F; Brailsford, Sally C; Smith, Honora K; Forero-Matiz, Sonia P; Camacho-Rodríguez, Bernardo A

2017-12-01

Production planning in the blood supply chain is a challenging task. Many complex factors such as uncertain supply and demand, blood group proportions, shelf life constraints and different collection and production methods have to be taken into account, and thus advanced methodologies are required for decision making. This paper presents an integrated simulation-optimization model to support both strategic and operational decisions in production planning. Discrete-event simulation is used to represent the flows through the supply chain, incorporating collection, production, storing and distribution. On the other hand, an integer linear optimization model running over a rolling planning horizon is used to support daily decisions, such as the required number of donors, collection methods and production planning. This approach is evaluated using real data from a blood center in Colombia. The results show that, using the proposed model, key indicators such as shortages, outdated units, donors required and cost are improved.

Reconfiguring Variety, Profitability, and Postponement for Product Customization with Global Supply Chains

DEFF Research Database (Denmark)

Bonev, Martin; Myrodia, Anna; Hvam, Lars

2016-01-01

At present, many industrial companies offering high product variety focus on systematically reducing the complexity of their product range and busi-ness processes. Related challenges are often named to increase time to market, reduce the effectiveness in product development, and lower process...... efficiency. For manufacturers with global supply chains additional uncertainties arise in de-fining the right manufacturing strategy with respect to production location and postponement. To better understand related managerial implications, this paper discusses a case study a global manufacturer providing...... customized industrial ap-plications. In particular, the study investigates the relationships between product variant profitability and manufacturing strategy relative to postponement and lo-cation. The results indicate that an improved configuration of these factors through substitution and supply chain...

Optimization of nested polymerase chain reaction assays for identification of Aeromonas salmonicida, Yersinia ruckeri and Flavobacterium psychrophilum

Science.gov (United States)

Taylor, P.W.; Winton, J.R.

2002-01-01

Nested polymerase chain reaction (PCR) assays were developed using first-round primers complementary to highly conserved regions within the bacterial 16S ribosomal RNA (rRNA) gene (universal eubacterial primers) and second-round primers specific for sequences within the 16S rRNA genes of Aeromonas salmonicida, Yersinia ruckeri, andFlavobacterium psychrophilum. Following optimization of the MgCl2 concentration and primer annealing temperature, PCR employing the universal eubacterial primers was used to amplify a 1,500-base-pair (bp) product visible in agarose gels stained with ethidium bromide. The calculated detection limit of this single-round assay was less than 1.4 × 104 colony-forming units (CFU) per reaction for all bacterial species tested. Single-round PCR using primer sets specific for A. salmonicida, Y. ruckeri, and F. psychrophilumamplified bands of 271, 575, and 1,100 bp, respectively, with detection limits of less than 1.4 × 104, 1.4 × 105, and 1.4 × 105 CFU per reaction. Using the universal eubacterial primers in the first round and the species-specific primer sets in the second round of nested PCR assays improved the detection ability by approximately four orders of magnitude to fewer than 14 CFU per sample for each of the three bacterial species. Such nested assays could be adapted to a wide variety of bacterial fish pathogens for which 16S sequences are available.

Earlinet single calculus chain: new products overview

Science.gov (United States)

D'Amico, Giuseppe; Mattis, Ina; Binietoglou, Ioannis; Baars, Holger; Mona, Lucia; Amato, Francesco; Kokkalis, Panos; Rodríguez-Gómez, Alejandro; Soupiona, Ourania; Kalliopi-Artemis, Voudouri

2018-04-01

The Single Calculus Chain (SCC) is an automatic and flexible tool to analyze raw lidar data using EARLINET quality assured retrieval algorithms. It has been already demonstrated the SCC can retrieve reliable aerosol backscatter and extinction coefficient profiles for different lidar systems. In this paper we provide an overview of new SCC products like particle linear depolarization ratio, cloud masking, aerosol layering allowing relevant improvements in the atmospheric aerosol characterization.

Molecular discrimination of Perna (Mollusca: Bivalvia) species using the polymerase chain reaction and species-specific mitochondrial primers

DEFF Research Database (Denmark)

Blair, D.; Waycott, M.; Byrne, L.

2006-01-01

This work was prompted by the need to be able to identify the invasive mussel species, Perna viridis, in tropical Australian seas using techniques that do not rely solely on morphology. DNA-based molecular methods utilizing a polymerase chain reaction (PCR) approach were developed to distinguish...

The Heck reaction in the production of fine chemicals

NARCIS (Netherlands)

Vries, Johannes G. de

2001-01-01

An overview is given of the use of the Heck reaction for the production of fine chemicals. Five commercial products have been identified that are produced on a scale in excess of 1 ton/year. The herbicide Prosulfuron™ is produced via a Matsuda reaction of 2-sulfonatobenzenediazonium on

The Supply Chain Triangle: How Synchronisation, Stability, and Productivity of Material Flows Interact

Directory of Open Access Journals (Sweden)

Florian Klug

2013-01-01

Full Text Available Empirical evidence created a commonly accepted understanding that synchronisation and stability of material flows impact its productivity. This crucial link between synchronous and stable material flows by time and quantity to create a supply chain with the highest throughput rates is at the heart of lean thinking. Although this supply chain triangle has generally been acknowledged over many years, it is necessary to reach a finer understanding of these dynamics. Therefore, we will develop and study supply chains with the help of fluid dynamics. A multistage, continuous material flow is modelled through a conservation law for material density. Unlike similar approaches, our model is not based on some quasi steady-state assumptions about the stochastic behaviour of the involved supply chain but rather on a simple deterministic rule for material flow density. These models allow us to take into account the nonlinear, dynamical interactions of different supply chain echelons and to test synchronised and stable flow with respect to its potential impacts. Numerical simulations verify that the model is able to simulate transient supply chain phenomena. Moreover, a quantification method relating to the fundamental link between synchronisation, stability, and productivity of supply chains has been found.

The impact of meningococcal polymerase chain reaction testing on laboratory confirmation of invasive meningococcal disease.

LENUS (Irish Health Repository)

Drew, Richard J

2012-03-01

Laboratory methods of diagnosis were examined for 266 children with invasive meningococcal disease. Seventy-five (36%) of 207 cases with bloodstream infection had both positive blood culture and blood meningococcal polymerase chain reaction (PCR), 130 (63%) negative blood culture and positive blood PCR, and 2 (1%) had positive blood culture and negative blood PCR. Sixty-three percent of cases were diagnosed by PCR alone.

In Chains? Automotive Suppliers and Their Product Development Activities

NARCIS (Netherlands)

F. von Corswant; J.Y.F. Wynstra (Finn); M. Wetzels (Alex)

2003-01-01

textabstractA conceptual framework is developed and tested in which supplier downstream position in the supply chain, supplier innovation strategy and customer development commitment are seen as the antecedents of supplier product development activity. Using partial least squares (PLS), we analyze

Portable gliadin-immunochip for contamination control on the food production chain.

Science.gov (United States)

Chiriacò, Maria Serena; de Feo, Francesco; Primiceri, Elisabetta; Monteduro, Anna Grazia; de Benedetto, Giuseppe Egidio; Pennetta, Antonio; Rinaldi, Ross; Maruccio, Giuseppe

2015-09-01

Celiac disease (CD) is one of the most common digestive disorders caused by an abnormal immune reaction to gluten. So far there are no available therapies, the only solution is a strict gluten-free diet, which however could be very challenging as gluten can be hidden in many food products. Furthermore an additional problem is related to cross-contamination of nominal gluten-free foods with gluten-based ones during manufacturing. Here we propose a lab on chip platform as a powerful tool to help food manufacturers to evaluate the real amount of gluten in their products by an accurate in-situ control of the production chain and maybe to specify the real gluten content in packages labeling. Our portable gliadin-immunochips, based on an electrochemical impedance spectroscopy transduction method, were first calibrated and then validated for both liquid and solid food matrixes by analyzing different beers and flours. The high specificity of our assay was also demonstrated by performing control experiments on rice and potatoes flours containing prolamin-like proteins. We achieved limit of quantification of 0.5 ppm for gliadin that is 20 times lower than the worldwide limit established for gluten-free food while the method of analysis is faster and cheaper than currently employed ELISA-based methods. Moreover our results on food samples were validated through a mass spectrometry standard analysis. Copyright © 2015 Elsevier B.V. All rights reserved.

Detection of Chloramphenicol Resistance Genes (cat in Clinical Isolates of Pseudomonas aeruginosa with Polymerase Chain Reaction Method

Directory of Open Access Journals (Sweden)

Tiana Milanda

2014-12-01

Full Text Available Pseudomonas aeruginosa is an opportunistic Gram negative bacteria, which may cause infection in eyes, ears, skin, bones, central nervous system, gastrointestinal tract, circulatory system, heart, respiratory system, and urinary tract. Recently, chloramphenicol is no longer used as the main option of the therapy due of its resistance case. The aim of this research was to detect the presence of gene which is responsible to chloramphenicol resistance in clinical isolates of P.aeruginosa. These bacteria isolated from pus of external otitis patients in Hasan Sadikin Hospital in Bandung City. Polymerase Chain Reaction (PCR method (colony-PCR and DNA-PCR were performed to detect this resistance gene. Electropherogram from PCR products showed that the chloramphenicol resistance in clinical isolates of P. aeruginosa was caused by cat gene (317 bp. Based on this research, cat gene may be used to detect the chloramphenicol resistance in patients with external ostitis.

The effect of chain flexibility and chain mobility on radiation crosslinking reactions of polymers

International Nuclear Information System (INIS)

Sun Jiazhen

2003-01-01

Flexibility of polymer chains is an important factor to effects of radiation crosslinking of the polymer. Polymers with flexible chains are easier to be crosslinked, with lower dose of gelation, than polymers with more rigid chains. And it is known that most polymers with abnormal rigidity can be radiation-crosslinked only at high temperatures when the molecular chains get enough mobility. The flexibility of polymer chains also influences the relationship between degree of degradation and radiation dose. A chain flexibility factor β has been introduced to modify the Charlesby-Pinner equation of sol-fraction and radiation dose. The new relationship equation applies to a wider range of polymers in radiation crosslinking. Studies also show that for flexible polymers with lower T g and molecular internal rotating factor, mechanism of radiation crosslinking is mainly in H type, whereas for rigid polymers with higher T g and molecular internal rotating factor, mechanism of radiation crosslinking is mainly in T type

Bioaccumulation and food chain transfer of corrosion products from radioactive stainless steel

International Nuclear Information System (INIS)

Young, J.S.

1986-07-01

Two sets of experiments were conducted to determine if corrosion products from radioactive Type 347 stainless steel could be biologically transferred from sediment through a marine food chain, and whether corrosion products dissolved in seawater could be bioaccumulated and then eliminated. Corrosion products containing 60 Co and 63 Ni from the radioactive stainless steel were introduced into marine sediments. Infaunal polychaete worms exposed to these sediments bioaccumulated the radionuclides. The feeding of these worms to shrimp and fish resulted in a trophic transfer of the radioactive products across a one-step food chain. The magnitude of the transfers are described in terms of transfer factors. Dissolved corrosion products as measured by the radionuclides were also bioaccumulated by shrimp and fish concentrating more than fish. Concentration factors were calculated

THE EFFECTS OF E-COMMERCE ON SUPPLY CHAIN IN TURKEY

OpenAIRE

AYDIN, Gülsüm; BAYAR ÇAĞLAK, Sibel; ALKAN, Güler

2011-01-01

Electronic commerce (e-commerce) and the internet are fundamentally changing the nature of supply chains, and redefining consumer reaction in supply chain era. In addition to standard forms for business-to-business transactions, ecommerce encompasses much wider activity. A new form of cooperation known as a virtual company, performing some of the processes needed to manufacture a product or deliver a service, has flourished. Nowadays, promoting the development of electronic commerce is one of...

Simultaneous detection of enteropathogenic viruses in buffalos faeces using multiplex reverse transcription-polymerase chain reaction (mRT-PCR

Directory of Open Access Journals (Sweden)

U. Pagnini

2010-02-01

Full Text Available A multiplex reverse transcription- polymerase chain reaction (mRT-PCR assay that detects Bovine Viral Diarrhoea Virus, Bovine Coronavirus, and Group A Rotaviruses in infected cell-culture fluids and clinical faecal samples is described. One hundred twenty faecal samples from buffalo calves with acute gastroenteritis were tested. The mRT-PCR was validated against simplex RT-PCR with published primers for Pestivirus, Coronavirus and Rotavirus. The multiplex RT-PCR was equally sensitive and specific in detecting viral infections compared with simplex RT-PCR. The mRT-PCR readily identified viruses by discriminating the size of their amplified gene products. This mRT-PCR may be a sensitive and rapid assay for surveillance of buffalo enteric viruses in field specimens. This novel multiplex RT-PCR is an attractive technique for the rapid, specific, and cost-effective laboratory diagnosis of acute gastroenteritis.

Reverse transcription and polymerase chain reaction: principles and applications in dentistry.

Science.gov (United States)

Santos, Carlos Ferreira Dos; Sakai, Vivien Thiemy; Machado, Maria Aparecida de Andrade Moreira; Schippers, Daniela Nicole; Greene, Andrew Seth

2004-03-01

Various molecular biology techniques have become available in the last few years. One of the most revolutionary of these techniques regarding nucleic acid analysis is the polymerase chain reaction (PCR), which was first described in 1985. This method relies on the exponential amplification of specific DNA fragments, resulting in millions of copies that can serve as templates for different kinds of analyses. PCR can be preceded by a reverse transcription (RT) reaction in order to produce cDNA from RNA (RT-PCR). RT-PCR provides the possibility to assess gene transcription in cells or tissues. PCR and RT-PCR techniques have been instrumental in dental research, and show potential to be used for diagnosis as well as for treatment and prevention of many diseases (dental caries, periodontal disease, endodontic infections and oral cancer). Compared to other traditional methodologies, PCR and RT-PCR show many advantages including high specificity, sensitivity, and speed. Since PCR and RT-PCR are relatively new techniques and are not available to most students and professionals involved with dentistry, the aim of this work is to present the details of these techniques as well as dental literature reports in which they were used.

Reaction pathway towards formation of cobalt single chain magnets and nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Balaji, G.; Desilva, Rohini M.; Palshin, V. [Center for Advanced Microstructures and Devices, Louisiana State University, 6980 Jefferson Highway, Baton Rouge, LA 70806 (United States); Desilva, N. [Department of Chemistry, Louisiana State University, Baton Rouge, LA 70803 (United States); Palmer, G. [Department of Biochemistry and Cell Biology, Rice University, MS 140, 6100 Main street, Houston, TX 77251 (United States); Kumar, Challa S.S.R., E-mail: ckumar1@lsu.ed [Center for Advanced Microstructures and Devices, Louisiana State University, 6980 Jefferson Highway, Baton Rouge, LA 70806 (United States)

2010-03-15

With the advent of molecular magnets the quest for suitable high density magnetic storage materials has fuelled further research in this area. Here in this report, we present a detailed mechanistic investigation of thermal decomposition of cyclopentadienyl cobalt [CoCp(CO){sub 2}] precursor where Cp is the cyclopentadienyl moiety. The reaction revealed the formation of cobalt nanoparticles (Co-NPs) through an isolable reaction intermediate characterized as a Single Chain Magnet (SCM), [Co(Cp){sub 2}]{sub 2}CoCl{sub 4} (1). The SQUID magnetic measurements showed the presence of very strong antiferromagnetic interactions between Co{sup 2+} ions. The zero-field cooled (ZFC) and field cooled (FC) magnetization curves branch out below 5 K and there is evidence for frequency dependent complex susceptibility along with a maximum observed around 2.5 K. The optical studies indicated that the Co{sup 2+} d-d transition is influenced by the polarity of the solvents. The cobalt nanoparticles (Co-NPs) were obtained, either directly from 1 or from its precursor. They are spherical in shape with a mean size 15 nm, have fcc crystal structure and were found to be ferromagnetic at room temperature.

Governance structures in the production chain Amazônia chestnut

Directory of Open Access Journals (Sweden)

Naila Fernanda Sbsczk Pereira Meneguetti

2015-12-01

Full Text Available This article aims to identify the structure of governance in the Production Chain Chestnut of the Amazon state of Rondonia in order to know the relationship of its agents. We used secondary data source and qualitative approach, based on the collection of data resulting from the project on nontimber forest products (NTFPs, which included the cities of Costa Marques, Guajará-Mirim, Machadinho do Oeste, Porto Velho and Presidente Médici, located in the state of Rondônia. It was found that producers and middlemen pay a high cost for shipping, however, these costs is not just about the initial link of the chain, but to the end consumer to pay more for the product, due to the difficulties faced during the process. Furthermore, it was also evidenced the low price of the product received by producers and middlemen, however, the transactions show that there is no formal relationship between the parties, contracts are informal, the form of governance found most frequently is the way market.

Fission-product SiC reaction in HTGR fuel

International Nuclear Information System (INIS)

Montgomery, F.

1981-01-01

The primary barrier to release of fission product from any of the fuel types into the primary circuit of the HTGR are the coatings on the fuel particles. Both pyrolytic carbon and silicon carbide coatings are very effective in retaining fission gases under normal operating conditions. One of the possible performance limitations which has been observed in irradiation tests of TRISO fuel is chemical interaction of the SiC layer with fission products. This reaction reduces the thickness of the SiC layer in TRISO particles and can lead to release of fission products from the particles if the SiC layer is completely penetrated. The experimental section of this report describes the results of work at General Atomic concerning the reaction of fission products with silicon carbide. The discussion section describes data obtained by various laboratories and includes (1) a description of the fission products which have been found to react with SiC; (2) a description of the kinetics of silicon carbide thinning caused by fission product reaction during out-of-pile thermal gradient heating and the application of these kinetics to in-pile irradiation; and (3) a comparison of silicon carbide thinning in LEU and HEU fuels

Simple model of inhibition of chain-branching combustion processes

Science.gov (United States)

Babushok, Valeri I.; Gubernov, Vladimir V.; Minaev, Sergei S.; Miroshnichenko, Taisia P.

2017-11-01

A simple kinetic model has been suggested to describe the inhibition and extinction of flame propagation in reaction systems with chain-branching reactions typical for hydrocarbon systems. The model is based on the generalised model of the combustion process with chain-branching reaction combined with the one-stage reaction describing the thermal mode of flame propagation with the addition of inhibition reaction steps. Inhibitor addition suppresses the radical overshoot in flame and leads to the change of reaction mode from the chain-branching reaction to a thermal mode of flame propagation. With the increase of inhibitor the transition of chain-branching mode of reaction to the reaction with straight-chains (non-branching chain reaction) is observed. The inhibition part of the model includes a block of three reactions to describe the influence of the inhibitor. The heat losses are incorporated into the model via Newton cooling. The flame extinction is the result of the decreased heat release of inhibited reaction processes and the suppression of radical overshoot with the further decrease of the reaction rate due to the temperature decrease and mixture dilution. A comparison of the results of modelling laminar premixed methane/air flames inhibited by potassium bicarbonate (gas phase model, detailed kinetic model) with the results obtained using the suggested simple model is presented. The calculations with the detailed kinetic model demonstrate the following modes of combustion process: (1) flame propagation with chain-branching reaction (with radical overshoot, inhibitor addition decreases the radical overshoot down to the equilibrium level); (2) saturation of chemical influence of inhibitor, and (3) transition to thermal mode of flame propagation (non-branching chain mode of reaction). The suggested simple kinetic model qualitatively reproduces the modes of flame propagation with the addition of the inhibitor observed using detailed kinetic models.

An In Vitro Model for Studying Neutrophil Activation During Cardiopulmonary Bypass by Using a Polymerase Chain Reaction Thermocycler

NARCIS (Netherlands)

Tang, Min; Zhao, Xiao-Gang; Gu, Y. John; Chen, Chang-Zhi

The accurate temperature control of a polymerase chain reaction (PCR) thermocycler was exploited in developing an in vitro model to study neutrophil activation during cardiopulmonary bypass. Neutrophils from 12 volunteers underwent temperature changes in a PCR thermocycler (37 degrees C for 30

Synthesis of Programmable Main-chain Liquid-crystalline Elastomers Using a Two-stage Thiol-acrylate Reaction

OpenAIRE

Saed, Mohand O.; Torbati, Amir H.; Nair, Devatha P.; Yakacki, Christopher M.

2016-01-01

This study presents a novel two-stage thiol-acrylate Michael addition-photopolymerization (TAMAP) reaction to prepare main-chain liquid-crystalline elastomers (LCEs) with facile control over network structure and programming of an aligned monodomain. Tailored LCE networks were synthesized using routine mixing of commercially available starting materials and pouring monomer solutions into molds to cure. An initial polydomain LCE network is formed via a self-limiting thiol-acrylate Michael-addi...

Analysis of reaction products formed in the gas phase reaction of E,E-2,4-hexadienal with atmospheric oxidants: Reaction mechanisms and atmospheric implications

Science.gov (United States)

Colmenar, I.; Martin, P.; Cabañas, B.; Salgado, S.; Martinez, E.

2018-03-01

An analysis of reaction products for the reaction of E,E-2,4-hexadienal with chlorine atoms (Cl) and OH and NO3 radicals has been carried out at the first time with the aim of obtaining a better understanding of the tropospheric reactivity of α,β-unsaturated carbonyl compounds. Fourier Transform Infrared (FTIR) spectroscopy and Gas Chromatography-Mass Spectrometry with a Time of Flight detector (GC-TOFMS) were used to carry out the qualitative and/or quantitative analyses. Reaction products in gas and particulate phase were observed from the reactions of E,E-2,4- hexadienal with all oxidants. E/Z-Butenedial and maleic anhydride were the main products identified in gas phase. E-butenedial calculated molar yield ranging from 4 to 10%. A significant amount of multifunctional compounds (chloro and hydroxy carbonyls) was identified. These compounds could be formed in particulate phase explaining the ∼90% of unaccounted carbon in gas phase. The reaction with Cl atoms in the presence of NOx with a long reaction time gave Peroxy Acetyl Nitrate (PAN) as an additional product, which is known for being an important specie in the generation of the photochemical smog. Nitrated compounds were the major organic products from the reaction with the NO3 radical. Based on the identified products, the reaction mechanisms have been proposed. In these mechanisms a double bond addition of the atmospheric oxidant at C4/C5 of E,E-2,4-hexadienal is the first step for tropospheric degradation.

Development of species-specific DNA probes for Campylobacter jejuni, Campylobacter coli, and Campylobacter lari by polymerase chain reaction fingerprinting

NARCIS (Netherlands)

Giesendorf, B A; van Belkum, A; Koeken, A; Stegeman, H; Henkens, M H; van der Plas, J; Goossens, H; Niesters, H G; Quint, W G

The application of polymerase chain reaction (PCR) fingerprinting assays enables discrimination between species and strains of microorganisms. PCR primers aiming at arbitrary sequences in combination with primers directed against the repetitive extragenic palindrome (REP) or enterobacterial

Synthesis of Programmable Main-chain Liquid-crystalline Elastomers Using a Two-stage Thiol-acrylate Reaction.

Science.gov (United States)

Saed, Mohand O; Torbati, Amir H; Nair, Devatha P; Yakacki, Christopher M

2016-01-19

This study presents a novel two-stage thiol-acrylate Michael addition-photopolymerization (TAMAP) reaction to prepare main-chain liquid-crystalline elastomers (LCEs) with facile control over network structure and programming of an aligned monodomain. Tailored LCE networks were synthesized using routine mixing of commercially available starting materials and pouring monomer solutions into molds to cure. An initial polydomain LCE network is formed via a self-limiting thiol-acrylate Michael-addition reaction. Strain-to-failure and glass transition behavior were investigated as a function of crosslinking monomer, pentaerythritol tetrakis(3-mercaptopropionate) (PETMP). An example non-stoichiometric system of 15 mol% PETMP thiol groups and an excess of 15 mol% acrylate groups was used to demonstrate the robust nature of the material. The LCE formed an aligned and transparent monodomain when stretched, with a maximum failure strain over 600%. Stretched LCE samples were able to demonstrate both stress-driven thermal actuation when held under a constant bias stress or the shape-memory effect when stretched and unloaded. A permanently programmed monodomain was achieved via a second-stage photopolymerization reaction of the excess acrylate groups when the sample was in the stretched state. LCE samples were photo-cured and programmed at 100%, 200%, 300%, and 400% strain, with all samples demonstrating over 90% shape fixity when unloaded. The magnitude of total stress-free actuation increased from 35% to 115% with increased programming strain. Overall, the two-stage TAMAP methodology is presented as a powerful tool to prepare main-chain LCE systems and explore structure-property-performance relationships in these fascinating stimuli-sensitive materials.

A COMBINED REACTION/PRODUCT RECOVERY PROCESS FOR THE CONTINUOUS PRODUCTION OF BIODIESEL

International Nuclear Information System (INIS)

Birdwell, J.F. Jr.; McFarlane, J.; Schuh, D.L.; Tsouris, C.; Day, J.N.; Hullette, J.N.

2009-01-01

Oak Ridge National Laboratory (ORNL) and Nu-Energie, LLC entered into a Cooperative Research And Development Agreement (CRADA) for the purpose of demonstrating and deploying a novel technology for the continuous synthesis and recovery of biodiesel from the transesterification of triglycerides. The focus of the work was the demonstration of a combination Couette reactor and centrifugal separator - an invention of ORNL researchers - that facilitates both product synthesis and recovery from reaction byproducts in the same apparatus. At present, transesterification of triglycerides to produce biodiesel is performed in batch-type reactors with an excess of a chemical catalyst, which is required to achieve high reactant conversions in reasonable reaction times (e.g., 1 hour). The need for long reactor residence times requires use of large reactors and ancillary equipment (e.g., feed and product tankage), and correspondingly large facilities, in order to obtain the economy of scale required to make the process economically viable. Hence, the goal of this CRADA was to demonstrate successful, extended operation of a laboratory-scale reactor/separator prototype to process typical industrial reactant materials, and to design, fabricate, and test a production-scale unit for deployment at the biodiesel production site. Because of its ease of operation, rapid attainment of steady state, high mass transfer and phase separation efficiencies, and compact size, a centrifugal contactor was chosen for intensification of the biodiesel production process. The unit was modified to increase the residence time from a few seconds to minutes*. For this application, liquid phases were introduced into the reactor as separate streams. One was composed of the methanol and base catalyst and the other was the soy oil used in the experiments. Following reaction in the mixing zone, the immiscible glycerine and methyl ester products were separated in the high speed rotor and collected from separate

A COMBINED REACTION/PRODUCT RECOVERY PROCESS FOR THE CONTINUOUS PRODUCTION OF BIODIESEL

Energy Technology Data Exchange (ETDEWEB)

Birdwell, J.F., Jr.; McFarlane, J.; Schuh, D.L.; Tsouris, C; Day, J.N. (Nu-Energie, LLC); Hullette, J.N. (Nu-Energie, LLC)

2009-09-01

Oak Ridge National Laboratory (ORNL) and Nu-Energie, LLC entered into a Cooperative Research And Development Agreement (CRADA) for the purpose of demonstrating and deploying a novel technology for the continuous synthesis and recovery of biodiesel from the transesterification of triglycerides. The focus of the work was the demonstration of a combination Couette reactor and centrifugal separator - an invention of ORNL researchers - that facilitates both product synthesis and recovery from reaction byproducts in the same apparatus. At present, transesterification of triglycerides to produce biodiesel is performed in batch-type reactors with an excess of a chemical catalyst, which is required to achieve high reactant conversions in reasonable reaction times (e.g., 1 hour). The need for long reactor residence times requires use of large reactors and ancillary equipment (e.g., feed and product tankage), and correspondingly large facilities, in order to obtain the economy of scale required to make the process economically viable. Hence, the goal of this CRADA was to demonstrate successful, extended operation of a laboratory-scale reactor/separator prototype to process typical industrial reactant materials, and to design, fabricate, and test a production-scale unit for deployment at the biodiesel production site. Because of its ease of operation, rapid attainment of steady state, high mass transfer and phase separation efficiencies, and compact size, a centrifugal contactor was chosen for intensification of the biodiesel production process. The unit was modified to increase the residence time from a few seconds to minutes*. For this application, liquid phases were introduced into the reactor as separate streams. One was composed of the methanol and base catalyst and the other was the soy oil used in the experiments. Following reaction in the mixing zone, the immiscible glycerine and methyl ester products were separated in the high speed rotor and collected from separate

Characteristics of liquid product from the pyrolysis of waste plastic mixture at low and high temperatures: Influence of lapse time of reaction

International Nuclear Information System (INIS)

Lee, Kyong-Hwan; Shin, Dae-Hyun

2007-01-01

Pyrolysis of a waste plastic mixture (high-density polyethylene: low-density polyethylene: polypropylene: polystyrene = 3:2:3:1) into a liquid product was carried out in a stirred semi-batch reactor at low (350 deg. C) and high (400 deg. C) temperatures. The effect of lapse time of reaction in the reactor and also degradation temperature on the characteristics of the liquid product from pyrolysis of the mixture was investigated. Liquid products were described by cumulative amount distribution, paraffin, olefin, naphthene and aromatic (PONA) distribution and molecular weight distribution. Their characteristic was quite differed with a lapse time of reaction and also at a low and high degradation temperatures, because of the different physicochemical properties of the plastic types in the mixture. With increase of lapse time of reaction, the order for the main products in PONA components obtained at 350 deg. C was firstly aromatic products and then olefin products, while at 400 deg. C the order was firstly aromatic products, then olefin products and finally paraffin products. The experiments also showed from the molecular weight distribution of liquid PONA components that the paraffin and olefin products had a wide distribution by mainly random scission of polymer, but in the case of olefin products were produced by an end-chain scission mechanism as well as random scission mechanism, as evidenced by much more light olefin products. This phenomenon was evident at a higher degradation temperature. Also, both the light olefin and naphthene products with a molecular weight of around 120, as a main product, showed a similar trend as a function of lapse time, which had a maximum fraction at 343 min (at 350 deg. C) and 83 min (at 400 deg. C). Among PONA components, the highest concentrations of aromatic products were obtained with a molecular weight of around 100 at the fastest lapse time of reaction, regardless of degradation temperature. It was concluded that the

Characteristics of liquid product from the pyrolysis of waste plastic mixture at low and high temperatures: influence of lapse time of reaction.

Science.gov (United States)

Lee, Kyong-Hwan; Shin, Dae-Hyun

2007-01-01

Pyrolysis of a waste plastic mixture (high-density polyethylene: low-density polyethylene: polypropylene: polystyrene = 3:2:3:1) into a liquid product was carried out in a stirred semi-batch reactor at low (350 degrees C) and high (400 degrees C) temperatures. The effect of lapse time of reaction in the reactor and also degradation temperature on the characteristics of the liquid product from pyrolysis of the mixture was investigated. Liquid products were described by cumulative amount distribution, paraffin, olefin, naphthene and aromatic (PONA) distribution and molecular weight distribution. Their characteristic was quite differed with a lapse time of reaction and also at a low and high degradation temperatures, because of the different physicochemical properties of the plastic types in the mixture. With increase of lapse time of reaction, the order for the main products in PONA components obtained at 350 degrees C was firstly aromatic products and then olefin products, while at 400 degrees C the order was firstly aromatic products, then olefin products and finally paraffin products. The experiments also showed from the molecular weight distribution of liquid PONA components that the paraffin and olefin products had a wide distribution by mainly random scission of polymer, but in the case of olefin products were produced by an end-chain scission mechanism as well as random scission mechanism, as evidenced by much more light olefin products. This phenomenon was evident at a higher degradation temperature. Also, both the light olefin and naphthene products with a molecular weight of around 120, as a main product, showed a similar trend as a function of lapse time, which had a maximum fraction at 343 min (at 350 degrees C) and 83 min (at 400 degrees C). Among PONA components, the highest concentrations of aromatic products were obtained with a molecular weight of around 100 at the fastest lapse time of reaction, regardless of degradation temperature. It was

Modeling and Optimization of Inventory-Distribution Routing Problem for Agriculture Products Supply Chain

Directory of Open Access Journals (Sweden)

Li Liao

2013-01-01

Full Text Available Mathematical models of inventory-distribution routing problem for two-echelon agriculture products distribution network are established, which are based on two management modes, franchise chain and regular chain, one-to-many, interval periodic order, demand depending on inventory, deteriorating treatment cost of agriculture products, start-up costs of vehicles and so forth. Then, a heuristic adaptive genetic algorithm is presented for the model of franchise chain. For the regular chain model, a two-layer genetic algorithm based on oddment modification is proposed, in which the upper layer is to determine the distribution period and quantity and the lower layer is to seek the optimal order cycle, quantity, distribution routes, and the rational oddment modification number for the distributor. By simulation experiments, the validity of the algorithms is demonstrated, and the two management modes are compared.

Detection of HCV-RNA by Reverse Transcription Polymerase Chain Reaction Using Biotinylated and Radioiodinated Primers

International Nuclear Information System (INIS)

Ryu, Jin Sook; Moon, Dae Hyuk; Cheon, Jun Hong; Chung, Yoon Young; Park, Hung Dong; Chung, Young Hwa; Lee, Young Sang

1994-01-01

This study was performed to evaluate the clinical applicability of the reverse transcription polymerase chain reaction (RT-PCR) kit of HCV-RNA using biotinylated and radioiodinated primers. Study subjects were 118 patients with positive anti-HCV. HCV-RNA in patients serum was extracted by guanidium thiocyanate method. After first amplification, the product was reamplified by primers labelled with biotin and I-125. The final amplification product was detected by counting the radioactivity after incubation in avidin coated tubes. In 51 samples, the test was repeated for evaluation of reproducibility. This new method was also compared with conventional RT-PCR methods in 34 samples from patients with chronic liver disease. The results were as follows, 1) HCV-RNA was positive in 85(97%)of 88 patients with chronic liver disease, and in 23 (73%) of 30 patients with normal liver function. 2) In comparison with conventional method, HCV-RNA was detected in 32(94%) of 34 patients with new method, whereas in 27(79% ) of the same group with conventional method 3) Repeated test with new method in 52 samples demonstrated 82% of concordant result. In conclusion, new method with biotinylated and radioiodinated primers was more sensitive than conventional method. However, great care must be taken for quality control because there were considerable interassay variation and possibility of false positivity and false negativity.

Detection of HCV-RNA by Reverse Transcription Polymerase Chain Reaction Using Biotinylated and Radioiodinated Primers

Energy Technology Data Exchange (ETDEWEB)

Ryu, Jin Sook; Moon, Dae Hyuk; Cheon, Jun Hong; Chung, Yoon Young; Park, Hung Dong; Chung, Young Hwa; Lee, Young Sang [Asan Medical Center, University of Ulsan, Seoul (Korea, Republic of)

1994-07-15

This study was performed to evaluate the clinical applicability of the reverse transcription polymerase chain reaction (RT-PCR) kit of HCV-RNA using biotinylated and radioiodinated primers. Study subjects were 118 patients with positive anti-HCV. HCV-RNA in patients serum was extracted by guanidium thiocyanate method. After first amplification, the product was reamplified by primers labelled with biotin and I-125. The final amplification product was detected by counting the radioactivity after incubation in avidin coated tubes. In 51 samples, the test was repeated for evaluation of reproducibility. This new method was also compared with conventional RT-PCR methods in 34 samples from patients with chronic liver disease. The results were as follows, 1) HCV-RNA was positive in 85(97%)of 88 patients with chronic liver disease, and in 23 (73%) of 30 patients with normal liver function. 2) In comparison with conventional method, HCV-RNA was detected in 32(94%) of 34 patients with new method, whereas in 27(79% ) of the same group with conventional method 3) Repeated test with new method in 52 samples demonstrated 82% of concordant result. In conclusion, new method with biotinylated and radioiodinated primers was more sensitive than conventional method. However, great care must be taken for quality control because there were considerable interassay variation and possibility of false positivity and false negativity.

Force decay of elastomeric chains - a mechanical design and product comparison study.

Science.gov (United States)

Balhoff, David A; Shuldberg, Matthew; Hagan, Joseph L; Ballard, Richard W; Armbruster, Paul C

2011-03-01

To evaluate the percentage force decay of elastomeric chain products utilizing three different design mechanisms simulating canine retraction; and to evaluate the percentage force decay of elastomeric chain products from four different companies. In vitro, laboratory study. LSUHSC Dental School, New Orleans, LA, USA. Closed (non-spaced), grey elastomeric chains from four companies were selected for the study. Three acrylic resin jigs were constructed to provide a framework for three simulated space closure mechanisms. The 6-5-3, the chain loop, and the 6-3 were the configuration mechanisms used in the study. An electronic force gauge was used to measure the percentage force decay associated with each elastomeric chain over 28 days at preselected times. There was a significant difference in the mean percentage force decay for the three different mechanisms (P < 0·001). For all four companies, the 6-3 mechanical design had the smallest mean percentage force decay. There was a significant difference in the mean percentage force decay for the different companies (P < 0·001). For all three mechanisms, Ormco had the smallest percentage force decay while Unitek had the highest percentage force decay. The significant difference in the mean percentage force decay for the different mechanisms suggests that the 6-3 design is a more efficient means of closing extraction spaces utilizing elastomeric chains.

Environmental Management in Danish transnational textile product chains

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Jørgensen, Ulrik; Hendriksen, Kåre

2010-01-01

on capacity building at the suppliers in developing countries, while other companies seem to focus the complex activities at domestic suppliers. Two new facilitating actors in environmental management in product chains were identified. Research limitations and implications The focus on one sector in one......Purpose The purpose is to analyse environmental responsibility of companies from industrialized countries when they source materials and products in countries with less environmental protection. Methodology The article is a study of corporate environmental management in the Danish textile...... have a practice without environmental initiatives. Dominating types of initiatives are cleaner technology, environmental management systems and cleaner products. Driving forces are governmental regulation, customer demands, market expectations and protection of corporate brands. Some companies focus...

The generation of radiolabeled DNA and RNA probes with polymerase chain reaction

International Nuclear Information System (INIS)

Schowalter, D.B.; Sommer, S.S.

1989-01-01

By including a radioactive triphosphate during polymerase chain reaction (PCR), probes of very high specific activity can be generated. The advantages of PCR labeling include (1) uniform labeling with a specific activity of 5 X 10(9) cpm/micrograms or higher (sensitivity of detection: 0.028 pg of target DNA per 24 h); (2) ease of regulation of both the specific activity and the amount of labeled probe produced; (3) efficient labeling of fragments less than 500 bp; (4) efficient incorporation over a wide range of input DNA template; (5) labeling with subnanogram amounts of input DNA; and (6) direct labeling of genomic DNA. The minimal amount of input DNA allows a virtually unlimited number of PCR labeling reactions to be performed on DNA generated by one amplification under the previously described nonlabeling conditions. This obviates the need for CsCl gradients or other large scale methods of DNA preparation. The above advantages except for the very high specific activity can also be achieved by transcript labeling after an amplification where one or both of PCR primers contain a phage promoter sequence

Hydrogen production via thermochemical water-splitting by lithium redox reaction

International Nuclear Information System (INIS)

Nakamura, Naoya; Miyaoka, Hiroki; Ichikawa, Takayuki; Kojima, Yoshitsugu

2013-01-01

Highlights: •Hydrogen production via water-splitting by lithium redox reactions possibly proceeds below 800 °C. •Entropy control by using nonequilibrium technique successfully reduces the reaction temperature. •The operating temperature should be further reduced by optimizing the nonequilibrium condition to control the cycle. -- Abstracts: Hydrogen production via thermochemical water-splitting by lithium redox reactions was investigated as energy conversion technique. The reaction system consists of three reactions, which are hydrogen generation by the reaction of lithium and lithium hydroxide, metal separation by thermolysis of lithium oxide, and oxygen generation by hydrolysis of lithium peroxide. The hydrogen generation reaction completed at 500 °C. The metal separation reaction is thermodynamically difficult because it requires about 3400 °C in equilibrium condition. However, it was indicated from experimental results that the reaction temperature was drastically reduced to 800 °C by using nonequilibrium technique. The hydrolysis reaction was exothermic reaction, and completed by heating up to 300 °C. Therefore, it was expected that the water-splitting by lithium redox reactions was possibly operated below 800 °C under nonequilibrium condition

PEMERIKSAAN BAKTERI LEPTOSPIRA PADA SAMPEL DARAH MANUSIA SUSPECT LEPTOSPIROSIS MENGGUNAKAN METODE PCR (POLYMERASE CHAIN REACTION

Directory of Open Access Journals (Sweden)

Sefrita Tri Utami

2014-01-01

Full Text Available ABSTRACTLeptospirosis is a zoonotic disease, which is caused by leptospira. Leptospirosis cases often show no specificclinical symptoms and is difficult to diagnose without testing samples in the laboratory. Testing using PCR(Polymerase Chain Reaction is considered more accurate than the other methods. Components required in theexamination Leptospira bacteria in human blood samples using PCR method is DNA template, DNA polymeraseenzyme, forward primer (PU1 and SU1 and reverse primer (Lep R1, nuclease free water, Mg 2 +, and dNTPs.Examination of Leptospira bacteria in human blood samples include sampling, DNA isolation, examination byPCR, and electrophoresis running.Key words: leptospirosis, Leptospira, PCR methodsABSTRAKLeptospirosis adalah penyakit zoonosis yang disebabkan oleh bakteri Leptospira. Kasus leptospirosis seringtidak menunjukkan gejala klinis yang spesifik dan sulit didiagnosis tanpa pengujian sampel di laboratorium.Pengujian dengan menggunakan metode PCR (Polymerase Chain Reaction dinilai lebih akurat dibandingkandengan metode yang lain. Komponen-komponen yang dibutuhkan dalam pemeriksaan bakteri Leptospira padasampel darah manusia menggunakan metode PCR adalah DNA template, enzim polymerase, Primer PU 1 danPrimer SU 1, Primer Lep R1, air, Mg2+ , dan dNTP. Pemeriksaan bakteri Leptospira pada sampel darah manusiameliputi pengambilan sampel, isolasi DNA, pemeriksaan dengan metode PCR, dan running elektroforesis.Kata kunci: leptospirosis, Leptospira, metode PCR

The value of supply chain coordination under moral hazard: A case study of the consumer product supply chain.

Science.gov (United States)

Lee, Yumi; Song, Sang Hwa; Cheong, Taesu

2018-01-01

In this paper, we examine a real-world case related to the consumer product supply chain to analyze the value of supply chain coordination under the condition of moral hazard. Because of the characteristics of a buyback contract scheme employed in the supply chain, the supplier company's sales department encourages retailers to order more inventory to meet their sales target, whereas retailers pay less attention to their inventory level and leftovers at the end of the season. This condition induces moral hazard problems in the operation of the supply chain, as suppliers suffer from huge returns of leftover inventory. This, in turn, is related to the obsolescence of returned inventory, even with penalty terms in the contract for the return of any leftovers. In this study, we show under the current buyback-based supply chain operation, the inventory levels of both the supplier and retailers exceed customer demand and develop vendor-managed inventory (VMI) system with base stock policy to remove any mismatch of supply and demand. A comparison of both systems shows that through the proper coordination of supply chain operations, both suppliers and retailers can gain additional benefits while providing proper services to end customers.

The Milk and Milk Products Value Chain in Ethiopia

NARCIS (Netherlands)

S. Drost (Sarah); J.C.A.C. van Wijk (Jeroen)

2011-01-01

textabstractThis report investigates the dynamics of a multi-stakeholder platform (named: Coordination Group, or CG) for stakeholders of the milk and milk products value chains in Ethiopia. The CG was initiated by the Dutch development organisation SNV in 2005 as part of a broader programme to

Comparison of CHROMagar, polymerase chain reaction-restriction fragment length polymorphism, and polymerase chain reaction-fragment size for the identification of Candida species.

Science.gov (United States)

Jafari, Zahra; Motamedi, Marjan; Jalalizand, Nilufar; Shokoohi, Gholam R; Charsizadeh, Arezu; Mirhendi, Hossein

2017-09-01

The epidemiological alteration in the distribution of Candida species, as well as the significantly increasing trend of either intrinsic or acquired resistance of some of these fungi highlights the need for a reliable method for the identification of the species. Polymerase chain reaction (PCR) is one of the methods facilitating the quick and precise identification of Candida species. The aim of this study was to compare the efficiency of CHROMagar, PCR-restriction fragment length polymorphism (PCR-RFLP), and PCR-fragment size polymorphism (PCR-FSP) assays in the identification of Candida species to determine the benefits and limitations of these methods. This study was conducted on 107 Candida strains, including 20 standard strains and 87 clinical isolates. The identification of the isolates was accomplished by using CHROMagar as a conventional method. The PCR-RFLP assay was performed on the entire internal transcribed spacer (ITS) region of ribosomal DNA (rDNA), and the consequent enzymatic digestion was compared with PCR-FSP results in which ITS1 and ITS2 regions were separately PCR amplified. In both molecular assays, yeast identification was carried out through the specific electrophoretic profiles of the PCR products. According to the results, the utilization of CHROMagar resulted in the identification of 29 (33.3%) Candida isolates, while the PCR-RFLP and PCR-FSP facilitated the identification of 83 (95.4%) and 80 (91.9%) clinical isolates, respectively. The obtained concordances between CHROMagar and PCR-RFLP, between CHROMagar and PCR-FSP, as well as between PCR-RFLP and PCR-FSP were 0.23, 0.20, and 0.77, respectively. The recognition of the benefits and limitations of PCR methods allows for the selection of the most efficient technique for a fast and correct differentiation. The PCR-RFLP and PCR-FSP assays had satisfactory concordance. The PCR-FSP provides a rapid, technically simple, and cost-effective method for the identification of Candida species

With medium-chain triglycerides, higher and faster oxygen radical production by stimulated polymorphonuclear leukocytes occurs.

Science.gov (United States)

Kruimel, J W; Naber, A H; Curfs, J H; Wenker, M A; Jansen, J B

2000-01-01

Parenteral lipid emulsions are suspected of suppressing the immune function. However, study results are contradictory and mainly concern the conventional long-chain triglyceride emulsions. Polymorphonuclear leukocytes were preincubated with parenteral lipid emulsions. The influence of the lipid emulsions on the production of oxygen radicals by these stimulated leukocytes was studied by measuring chemiluminescence. Three different parenteral lipid emulsions were tested: long-chain triglycerides, a physical mixture of medium- and long-chain triglycerides, and structured triglycerides. Structured triglycerides consist of triglycerides where the medium- and long-chain fatty acids are attached to the same glycerol molecule. Stimulated polymorphonuclear leukocytes preincubated with the physical mixture of medium- and long-chain triglycerides showed higher levels of oxygen radicals (p triglycerides or structured triglycerides. Additional studies indicated that differences in results of various lipid emulsions were not caused by differences in emulsifier. The overall production of oxygen radicals was significantly lower after preincubation with the three lipid emulsions compared with controls without lipid emulsion. A physical mixture of medium- and long-chain triglycerides induced faster production of oxygen radicals, resulting in higher levels of oxygen radicals, compared with long-chain triglycerides or structured triglycerides. This can be detrimental in cases where oxygen radicals play either a pathogenic role or a beneficial one, such as when rapid phagocytosis and killing of bacteria is needed. The observed lower production of oxygen radicals by polymorphonuclear leukocytes in the presence of parenteral lipid emulsions may result in immunosuppression by these lipids.

Gynecological manifestations, histopathological findings, and schistosoma-specific polymerase chain reaction results among women with Schistosoma haematobium infection

DEFF Research Database (Denmark)

Randrianasolo, Bodo Sahondra; Jourdan, Peter Mark; Ravoniarimbinina, Pascaline

2015-01-01

BACKGROUND: The pathophysiology of female genital schistosomiasis (FGS) is only partially understood. This study aims to describe the histopathological findings, polymerase chain reaction (PCR) results, and gynecological manifestations of FGS in women with different intensities of Schistosoma hae...

Accuracy of real-time polymerase chain reaction for Toxoplasma gondii in amniotic fluid.

Science.gov (United States)

Wallon, Martine; Franck, Jacqueline; Thulliez, Philippe; Huissoud, Cyril; Peyron, François; Garcia-Meric, Patricia; Kieffer, François

2010-04-01

To provide clinicians with information about the accuracy of real-time polymerase chain reaction (PCR) analysis of amniotic fluid for the prenatal diagnosis of congenital Toxoplasma infection. This was a prospective cohort study of women with Toxoplasma infection identified by prenatal screening in three centers routinely carrying out real-time PCR for the detection of Toxoplasma gondii in amniotic fluid. The data available were gestational age at maternal infection, types and dates of maternal treatment, results of amniocentesis and neonatal work-up and definitive infectious status of the child. We estimated sensitivity, specificity and positive and negative predictive values both overall and per trimester of pregnancy at the time of maternal infection. Polymerase chain reaction analysis was carried out on amniotic fluid for 261 of the 377 patients included (69%). It was accurate with the exception of four negative results in children who were infected. Overall sensitivity and negative predictive value were 92.2% (95% confidence interval [CI] 81-98%) and 98.1% (95% CI 95-99.5%), respectively. There was no significant association with the trimester of pregnancy during which maternal infection occurred. Specificity and positive predictive values of 100% were obtained for all trimesters. Real-time PCR analysis significantly improves the detection of T. gondii on amniotic fluid. It provides an accurate tool to predict fetal infection and to decide on appropriate treatment and surveillance. However, postnatal follow-up remains necessary in the first year of life to fully exclude infection in children for whom PCR results were negative. III.

Stochastic multi-period multi-product multi-objective Aggregate Production Planning model in multi-echelon supply chain

Directory of Open Access Journals (Sweden)

Kaveh Khalili-Damghani

2017-07-01

Full Text Available In this paper a multi-period multi-product multi-objective aggregate production planning (APP model is proposed for an uncertain multi-echelon supply chain considering financial risk, customer satisfaction, and human resource training. Three conflictive objective functions and several sets of real constraints are considered concurrently in the proposed APP model. Some parameters of the proposed model are assumed to be uncertain and handled through a two-stage stochastic programming (TSSP approach. The proposed TSSP is solved using three multi-objective solution procedures, i.e., the goal attainment technique, the modified ε-constraint method, and STEM method. The whole procedure is applied in an automotive resin and oil supply chain as a real case study wherein the efficacy and applicability of the proposed approaches are illustrated in comparison with existing experimental production planning method.

SUPPLY CHAIN STRATEGIES IN THE CONTEXT OF AN E-COMMERCE CHAIN (E-CHAIN

Directory of Open Access Journals (Sweden)

João Gilberto Mendes do Reis

2014-05-01

Full Text Available This paper purpose to explore the relationships between supply chain strategies and product performance in retail e-commerce. In this case, we concern that in current, in order to bear up under competition, organizations have to manage their supply chains so that they meet the needs of their final customers. With this concept in mind, the research presented in this study focuses on establishing the right strategy for supply chains according to their product segment. Thus, after a Literature Review, the paper explain a methodology based in different authors studies. Finally the article focuses on a pratical case in e-commerce retail that describes its application in this field. The research shows that it is possible to use a methodology for classifying supply chains using chain strategies and product features. The use of the right strategy for supply chains will improve the competitive advantage of businesses. One limitation is that the methodology study focuses on only two e-commerce segment; future studies may go further in refining the proposed framework for other segments. The aim of this research is to offer businesses a model for evaluating supply chains, allowing them to improve the performance of their products and services by using the right strategy for supply chains. The classification proposal of this paper presents an original model for classification of supply chains based on different studies on the theme.

Detection of Ampicillin Resistance Genes (bla in Clinical Isolates of Escherichia coli with Polymerase Chain Reaction Method

Directory of Open Access Journals (Sweden)

Tiana Milanda

2014-09-01

Full Text Available Escherichia coli is a rod negative Gram which could be pathogenic, if its value increases or located in outer gastrointestinal tract. Pathogenic E. coli will produce enterotoxin which will cause diarrhoea or infection in urine tract. Ampicilin was one of particular antibiotics to overcome infection. Ampicilin nowadays is no longer used as primary medicine, because of its resistance case. The aim of this research is to detect the presence of gene which is responsible to ampicilin resistant E. coli. We used isolated midstream urine from cystitis object in Hasan Sadikin Hospital (RSHS as samples. Polymerase Chain Reaction (PCR method (colony-PCR and DNA-PCR were done to invenstigate the antibiotic resistency. Based on the result of antibiotic susceptibility testing to ampicillin, E. coli samples were resistant to ampicilin. Elektroforegram products of colony-PCR and DNA-PCR showed that the resistance case of ampicilin caused by bla gene (199 bp. Selective and rational antibiotic treatment is required to prevent ampicillin resistance in patients with symptoms

Structure of fungal oxyluciferin, the product of the bioluminescence reaction.

Science.gov (United States)

Purtov, K V; Osipova, Z M; Petushkov, V N; Rodionova, N S; Tsarkova, A S; Kotlobay, A A; Chepurnykh, T V; Gorokhovatsky, A Yu; Yampolsky, I V; Gitelson, J I

2017-11-01

The structure of fungal oxyluciferin was determined, the enzymatic bioluminescence reaction under substrate saturation conditions with discrete monitoring of formed products was conducted, and the structures of the end products of the reaction were established. On the basis of these studies, the scheme of oxyluciferin degradation to the end products was developed. The structure of fungal oxyluciferin was confirmed by counter synthesis.

The Production of Biodiesel and Bio-kerosene from Coconut Oil Using Microwave Assisted Reaction

Science.gov (United States)

SAIFUDDIN, N.; SITI FAZLILI, A.; KUMARAN, P.; PEI-JUA, N.; PRIATHASHINI, P.

2016-03-01

Biofuels including biodiesel, an alternative fuel, is renewable, environmentally friendly, non-toxic and low emissions. The raw material used in this work was coconut oil, which contained saturated fatty acids about 90% with high percentage of medium chain (C8-C12), especially lauric acid and myristic acid. The purpose of this research was to study the effect of power and NaOH catalyst in transesterification assisted by microwave for production of biofuels (biodiesel and bio-kerosene) derived from coconut oil. The reaction was performed with oil and methanol using mole ratio of 1:6, catalyst concentration of 0.6% with microwave power at 100W, 180W, 300W, 450W, 600W, and 850W. The reaction time was set at of 3, 5, 7, 10 and 15 min. The results showed that microwave could accelerate the transesterification process to produce biodiesel and bio-kerosene using NaOH catalyst. The highest yield of biodiesel was 97.17 %, or 99.05 % conversion at 5 min and 100W microwave power. Meanwhile, the bio-kerosene obtained was 65% after distillation.

Chlorine dioxide reaction with selected amino acids in water

International Nuclear Information System (INIS)

Navalon, Sergio; Alvaro, Mercedes; Garcia, Hermenegildo

2009-01-01

Chlorine dioxide is a hypochlorite alternative disinfectant agent. In this context, we have determined the products formed in the reaction of ClO 2 with selected amino acids as model compounds that can be present in natural waters. The reaction of tryptophane, histidine and tyrosine (10 ppm each) with ClO 2 were studied at molar ratios ranging from 0.25 to 4 in the presence or absence of oxygen. It was found that in the absence of oxygen adding substoichiometric amounts of ClO 2 creates products that are structurally similar to the starting amino acids. Through a series of cascade reactions the initial product distribution gradually evolves toward simple, small carbon chain products that are far from the starting amino acid. The reaction product distribution revealed that chlorine dioxide can attack the electron-rich aromatic moieties as well as the nitrogen atom lone electron pair. Our study is relevant to gain knowledge on the reaction mechanism of ClO 2 with ubiquitous amino acids present in natural waters.

Forecasting return products in an integrated forward/reverse supply chain utilizing an ANFIS

Directory of Open Access Journals (Sweden)

Kumar D. Thresh

2014-09-01

Full Text Available Interests in Closed-Loop Supply Chain (CLSC issues are growing day by day within the academia, companies, and customers. Many papers discuss profitability or cost reduction impacts of remanufacturing, but a very important point is almost missing. Indeed, there is no guarantee about the amounts of return products even if we know a lot about demands of first products. This uncertainty is due to reasons such as companies’ capabilities in collecting End-of-Life (EOL products, customers’ interests in returning (and current incentives, and other independent collectors. The aim of this paper is to deal with the important gap of the uncertainties of return products. Therefore, we discuss the forecasting method of return products which have their own open-loop supply chain. We develop an integrated two-phase methodology to cope with the closed-loop supply chain design and planning problem. In the first phase, an Adaptive Network Based Fuzzy Inference System (ANFIS is presented to handle the uncertainties of the amounts of return product and to determine the forecasted return rates. In the second phase, and based on the results of the first one, the proposed multi-echelon, multi-product, multi-period, closed-loop supply chain network is optimized. The second-phase optimization is undertaken based on using general exact solvers in order to achieve the global optimum. Finally, the performance of the proposed forecasting method is evaluated in 25 periods using a numerical example, which contains a pattern in the returning of products. The results reveal acceptable performance of the proposed two-phase optimization method. Based on them, such forecasting approaches can be applied to real-case CLSC problems in order to achieve more reliable design and planning of the network

Catalytic activation of molecular hydrogen in alkyne hydrogenation reactions by lanthanide metal vapor reaction products

International Nuclear Information System (INIS)

Evans, W.J.; Bloom, I.; Engerer, S.C.

1983-01-01

A rotary metal vapor was used in the synthesis of Lu, Er, Nd, Sm, Yb, and La alkyne, diene, and phosphine complexes. A typical catalytic hydrogenation experiment is described. The lanthanide metal vapor product is dissolved in tetrahydrofuran or toluene and placed in a pressure reaction vessel 3-hexyne (or another substrate) is added, the chamber attached to a high vacuum line, cooled to -196 0 C, evacuated, warmed to ambient temperature and hydrogen is added. The solution is stirred magnetically while the pressure in monitored. The reaction products were analyzed by gas chromatography. Rates and products of various systems are listed. This preliminary survey indicates that catalytic reaction chemistry is available to these metals in a wide range of coordination environments. Attempts to characterize these compounds are hampered by their paramagnetic nature and their tendency to polymerize

Supply chain network downsizing with product line pruning using a new demand substitution

NARCIS (Netherlands)

Ashayeri, J.; Ma, N.; Sotirov, R.

2015-01-01

This paper presents an optimization model for downsizing a multi-product supply chain facing bankruptcy risk, where multi-functional production facilities are shared for producing a group of substitutable products. In order to determine the potential demand after discontinuation of certain product

The alignment of product strategy to supply chain practices of craft businesses in Gauteng Province, South Africa

Directory of Open Access Journals (Sweden)

Craig Voortman

2014-11-01

Full Text Available External factors such as blurring market boundaries, escalating customer diversity and increasing global competitive threats have forced businesses to build strategies around key products and formulate market-driven strategies that are integrated with relationship and supply chain strategies to deliver superior customer value. Indeed, in the modern era of supply chain management, organisations are getting more integrated with their suppliers and customers as a way to manage the total supply chain. The purpose of this research was to determine if product strategies and supply chain practices of small craft business are aligned. Personal in-depth interviews were conducted with nine craft businesses operating in Gauteng Province, South Africa. The findings revealed that craft businesses struggle to match their product strategies with their supply chain strategies. Craft businesses also exhibited some inbound supply chain weaknesses.

Simultaneous detection of the three ilarviruses affecting stone fruit trees by nonisotopic molecular hybridization and multiplex reverse-transcription polymerase chain reaction.

Science.gov (United States)

Saade, M; Aparicio, F; Sánchez-Navarro, J A; Herranz, M C; Myrta, A; Di Terlizzi, B; Pallás, V

2000-12-01

ABSTRACT The three most economically damaging ilarviruses affecting stone fruit trees on a worldwide scale are the related Prunus necrotic ringspot virus (PNRSV), Prune dwarf virus (PDV), and Apple mosaic virus (ApMV). Nonisotopic molecular hybridization and multiplex reverse-transcription polymerase chain reaction (RT-PCR) methodologies were developed that could detect all these viruses simultaneously. The latter technique was advantageous because it was discriminatory. For RT-PCR, a degenerate antisense primer was designed which was used in conjunction with three virus-specific sense primers. The amplification efficiencies for the detection of the three viruses in the multiplex RT-PCR reaction were identical to those obtained in the single RT-PCR reactions for individual viruses. This cocktail of primers was able to amplify sequences from all of the PNRSV, ApMV, and PDV isolates tested in five Prunus spp. hosts (almond, apricot, cherry, peach, and plum) occurring naturally in single or multiple infections. For ApMV isolates, differences in the electrophoretic mobilities of the PCR products were observed. The nucleotide sequence of the amplified products of two representative ApMV isolates was determined, and comparative analysis revealed the existence of a 28-nucleotide deletion in the sequence of isolates showing the faster electrophoretic mobility. To our knowledge, this is the first report on the simultaneous detection of three plant viruses by multiplex RT-PCR in woody hosts. This multiplex RT-PCR could be a useful time and cost saving method for indexing these three ilarviruses, which damage stone fruit tree yields, and for the analysis of mother plants in certification programs.

Design of Demand Driven Return Supply Chain for High-Tech Products

NARCIS (Netherlands)

Ashayeri, J.; Tuzkaya, G.

2010-01-01

Many high-tech supply chain operate in a context of high process and market uncertainties due to shorter product life cycles. When introducing a new product, a company must manage the cost of supply, including the cost of returns over its short life cycle. The returns distribution looks like a

Aromatic products from reaction of lignin model compounds with UV-alkaline peroxide

International Nuclear Information System (INIS)

Sun, Y.P.; Wallis, A.F.A.; Nguyen, K.L.

1997-01-01

A series of guaiacyl and syringyl lignin model compounds and their methylated analogues were reacted with alkaline hydrogen peroxide while irradiating with UV light at 254 nm. The aromatic products obtained were investigated by gas chromatography-mass spectrometry (GC-MS). Guaiacol, syringol and veratrol gave no detectable aromatic products. However, syringol methyl ether gave small amounts of aromatic products, resulting from ring substitution and methoxyl displacement by hydroxyl radicals. Reaction of vanillin and syringaldehyde gave the Dakin reaction products, methoxy-1,4-hydroquinones, while reaction of their methyl ethers yielded benzoic acids. Acetoguaiacone, acetosyringone and their methyl ethers afforded several hydroxylated aromatic products, but no aromatic products were identified in the reaction mixtures from guaiacylpropane and syringylpropane. In contrast, veratrylpropane gave a mixture from which 17 aromatic hydroxylated compounds were identified. It is concluded that for phenolic lignin model compounds, particularly those possessing electrondonating aromatic ring substituents, ring-cleavage reactions involving superoxide radical anions are dominant, whereas for non-phenolic lignin models, hydroxylation reactions through attack of hydroxyl radicals prevail

Analysis of a Buchwald-Hartwig amination: reaction for pharmaceutical production

DEFF Research Database (Denmark)

Christensen, Henrik

The Buchwald-Hartwig amination reaction is widely used in the production of N-arylated amines in the pharmaceutical industry. The reaction is betweenan aryl halogen and a primary or secondary amine in the presence of a base and a homogeneous catalyst giving the desired N-arylated amine. Due to mild...... is to increase the understanding of the chem­ical reaction mechanisms and kinetics for the Buchwald-Hartwig amination reaction. Also, to develop methods for application of these mechanisms and kinetics to optimize and scale up an organic synthesis to an industrial phar­maceutical production. The Buchwald...

Analysis of a Buckwald-Hartwig amination: reaction for pharmaceutical production

DEFF Research Database (Denmark)

Christensen, Henrik; Kiil, Søren; Dam-Johansen, Kim

The Buchwald-Hartwig amination reaction is widely used in the production of N-arylated amines in the pharmaceutical industry. The reaction is betweenan aryl halogen and a primary or secondary amine in the presence of a base and a homogeneous catalyst giving the desired N-arylated amine. Due to mild...... is to increase the understanding of the chem­ical reaction mechanisms and kinetics for the Buchwald-Hartwig amination reaction. Also, to develop methods for application of these mechanisms and kinetics to optimize and scale up an organic synthesis to an industrial phar­maceutical production. The Buchwald...

76 FR 34271 - Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit, Including...

Science.gov (United States)

2011-06-13

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-74,671] Hewlett Packard, Global Parts Supply Chain, Global Product Life Cycles Management Unit, Including Teleworkers Reporting to... Supply Chain, Global Product Life Cycles Management Unit, including teleworkers reporting to Houston...

Observing new product impacts on sectors value chains : The case of a French electronic SME

NARCIS (Netherlands)

Marche, B.; Boly, V.; Ortt, J.R.

2016-01-01

As a new technology impacts both the company itself and its ecosystem, the aim of this study is to visualize the influence of SME's new products on its supply chain. We adopted a case study approach to explore how products can affect the structure of a supply chain. Using data about the

The value of supply chain coordination under moral hazard: A case study of the consumer product supply chain

Science.gov (United States)

Lee, Yumi; Song, Sang Hwa

2018-01-01

In this paper, we examine a real-world case related to the consumer product supply chain to analyze the value of supply chain coordination under the condition of moral hazard. Because of the characteristics of a buyback contract scheme employed in the supply chain, the supplier company’s sales department encourages retailers to order more inventory to meet their sales target, whereas retailers pay less attention to their inventory level and leftovers at the end of the season. This condition induces moral hazard problems in the operation of the supply chain, as suppliers suffer from huge returns of leftover inventory. This, in turn, is related to the obsolescence of returned inventory, even with penalty terms in the contract for the return of any leftovers. In this study, we show under the current buyback-based supply chain operation, the inventory levels of both the supplier and retailers exceed customer demand and develop vendor-managed inventory (VMI) system with base stock policy to remove any mismatch of supply and demand. A comparison of both systems shows that through the proper coordination of supply chain operations, both suppliers and retailers can gain additional benefits while providing proper services to end customers. PMID:29547625

Engineered Production of Short-Chain Acyl-Coenzyme A Esters in Saccharomyces cerevisiae

DEFF Research Database (Denmark)

Krink-Koutsoubelis, Nicolas; Loechner, Anne C.; Lechner, Anna

2018-01-01

Short-chain acyl-coenzyme A esters serve as intermediate compounds in fatty acid biosynthesis, and the production of polyketides, biopolymers and other value-added chemicals. S. cerevisiae is a model organism that has been utilized for the biosynthesis of such biologically and economically valuable...... compounds. However, its limited repertoire of short-chain acyl-CoAs effectively prevents its application as a production host for a plethora of natural products. Therefore, we introduced biosynthetic metabolic pathways to five different acyl-CoA esters into S. cerevisiae. Our engineered strains provide......-CoA at 0.5 μM; and isovaleryl-CoA, n-butyryl-CoA, and n-hexanoyl-CoA at 6 μM each. The acyl-CoAs produced in this study are common building blocks of secondary metabolites and will enable the engineered production of a variety of natural products in S. cerevisiae. By providing this toolbox of acyl...

Effects of Superparamagnetic Nanoparticle Clusters on the Polymerase Chain Reaction

Directory of Open Access Journals (Sweden)

Toshiaki Higashi

2012-04-01

Full Text Available The polymerase chain reaction (PCR method is widely used for the reproduction and amplification of specific DNA segments, and a novel PCR method using nanomaterials such as gold nanoparticles has recently been reported. This paper reports on the effects of superparamagnetic nanoparticles on PCR amplification without an external magnetic field, and clarifies the mechanism behind the effects of superparamagnetic particle clusters on PCR efficiency by estimating the structures of such clusters in PCR. It was found that superparamagnetic nanoparticles tend to inhibit PCR amplification depending on the structure of the magnetic nanoparticle clusters. The paper also clarifies that Taq polymerase is captured in the spaces formed among magnetic nanoparticle clusters, and that it is captured more efficiently as a result of their motion from heat treatment in PCR thermal cycles. Consequently, Taq polymerase that should be used in PCR is reduced in the PCR solution. These outcomes will be applied to novel PCR techniques using magnetic particles in an external magnetic field.

Evidence of simian retrovirus type D by polymerase chain reaction.

Science.gov (United States)

Hwa, Christian Z R; Tsai, Sheung Pun; Yee, JoAnn L; Van Rompay, Koen K; Roberts, Jeffrey A

2017-06-01

Over the past few years, there have been reports of finding Simian retrovirus type D (SRV) in macaque colonies where some animals were characterized as antibody positive but virus negative raising questions about how SRV was transmitted or whether there is a variant strain detected by antibody but not polymerase chain reaction (PCR) in current use. We developed a three-round nested PCR assay using degenerate primers targeting the pol gene to detect for SRV serotypes 1-5 and applied this newly validated PCR assay to test macaque DNA samples collected in China from 2010 to 2015. Using the nested PCR assay validated in this study, we found 0.15% of the samples archived on FTA ® cards were positive. The source of SRV infection identified within domestic colonies might have originated from imported macaques. The multiplex nested PCR assay developed here may supplement the current assays for SRV. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The effects of reactants ratios, reaction temperatures and times on Maillard reaction products of the L-ascorbic acid/L-glutamic acid system

Directory of Open Access Journals (Sweden)

Yong-Yan ZHOU

2016-01-01

Full Text Available Abstract The transformation law of the Maillard reaction products with three different reactants ratios - equimolar reactants, excess L-glutamic acid and excess L-ascorbic acid reaction respectively, five different temperatures, and different time conditions for the L-ascorbic acid / L-glutamic acid system were investigated. Results showed that, the increase of the reaction time and temperature led to the increase of the browning products, uncoloured intermediate products, as well as aroma compounds. Compared with the equimolar reaction system, the excess L-ascorbic acid reaction system produced more browning products and uncoloured intermediate products, while the aroma compounds production remained the same. In the excess L-glutamic acid system, the uncoloured intermediate products increased slightly, the browning products remained the same, while the aroma compounds increased.

Production of monoclonal antibodies and development of a quantitative immuno-polymerase chain reaction assay to detect and quantify recombinant Glutathione S-transferase.

Science.gov (United States)

Abud, J E; Luque, E H; Ramos, J G; Rodriguez, H A

2017-07-01

GST-tagged proteins are important tools for the production of recombinant proteins. Removal of GST tag from its fusion protein, frequently by harsh chemical treatments or proteolytic methods, is often required. Thus, the monitoring of the proteins in tag-free form requires a significant effort to determine the remnants of GST during purification process. In the present study, we developed both a conventional enzyme-linked immunosorbent assay (ELISA) and an immuno-polymerase chain reaction (IPCR) assay, both specific for detection of recombinant GST (rGST). rGST was expressed in Escherichia coli JM109, using a pGEX4T-3 vector, and several anti-rGST monoclonal antibodies were generated using hybridoma technology. Two of these were rationally selected as capture and detection antibodies, allowing the development of a sandwich ELISA with a limit of detection (LOD) of 0.01 μg/ml. To develop the rGST-IPCR assay, we selected "Universal-IPCR" format, comprising the biotin-avidin binding as the coupling system. In addition, the rGST-IPCR was developed in standard PCR tubes, and the surface adsorption of antibodies on PCR tubes, the optimal neutravidin concentrations, the generation of a reporter DNA and the concentration effect were studied and determined. Under optimized assay conditions, the rGST-IPCR assay provided a 100-fold increase in the LOD as well as an expanded working range, in comparison with rGST-ELISA. The proposed method exhibited great potentiality for application in several fields in which measurement of very low levels of GST is necessary, and might provide a model for other IPCR assays. Copyright © 2017 Elsevier Inc. All rights reserved.

Implementation of system dynamic simulation method to optimize profit in supply chain network of vegetable product

Science.gov (United States)

Tama, I. P.; Akbar, Z.; Eunike, A.

2018-04-01

Vegetables are categorized as a perishable product, which is a product with short lifespan thus requires proper handling and planning to reduce losses caused by the short lifespan. In order to reduce the losses, coordination among the players in the supply chain is required. On the other hand, the decision in the supply chain of vegetables and other farming products in the traditional market of developing country is independent among the players. This research is conducted by using System Dynamic Simulation method to develop model and scenario by coordinating the supply quantity amongst players in the supply chain. The scenarios are developed based on newsboy inventory model. This study aims to compare scenarios combining tiers involved in coordination program. The result shows that coordination in supply chain increases total supply chain profit, although there will always be players who experienced decrements in profit. The scenario of coordination among the farmer, the distributor, and the wholesaler resulted in the highest increase in total supply chain profit compared to other coordination scenarios, with an increased value of 10.49%.

Entanglement and quantum phase transitions in matrix-product spin-1 chains

International Nuclear Information System (INIS)

Alipour, S.; Karimipour, V.; Memarzadeh, L.

2007-01-01

We consider a one-parameter family of matrix-product states of spin-1 particles on a periodic chain and study in detail the entanglement properties of such a state. In particular, we calculate exactly the entanglement of one site with the rest of the chain, and the entanglement of two distant sites with each other, and show that the derivative of both these properties diverge when the parameter g of the states passes through a critical point. Such a point can be called a point of quantum phase transition, since at this point the character of the matrix-product state, which is the ground state of a Hamiltonian, changes discontinuously. We also study the finite size effects and show how the entanglement depends on the size of the chain. This later part is relevant to the field of quantum computation where the problem of initial state preparation in finite arrays of qubits or qutrits is important. It is also shown that the entanglement of two sites have scaling behavior near the critical point

Fusion reaction product diagnostics in ASDEX

International Nuclear Information System (INIS)

Bosch, H.S.

1987-01-01

A diagnostic method was developed to look for the charged fusion products from the D(D,p)T-reactions in the divertor tokamak ASDEX. With a semi-conductor detector it was possible to evaluate the ion temperature in thermal plasmas from the proton energy spectra as well as from the triton spectra. In lower-hybrid wave heated plasmas non-thermal (fast) ions were observed. These ions create fusion products with a characteristically different energy spectrum. (orig.)

Direct photoaffinity labeling by nucleotides of the apparent catalytic site on the heavy chains of smooth muscle and Acanthamoeba myosins

International Nuclear Information System (INIS)

Maruta, H.; Korn, E.D.

1981-01-01

The heavy chains of Acanthamoeba myosins, IA, IB and II, turkey gizzard myosin, and rabbit skeletal muscle myosin subfragment-1 were specifically labeled by radioactive ATP, ADP, and UTP, each of which is a substrate or product of myosin ATPase activity, when irradiated with uv light at 0 0 C. With UTP, as much as 0.45 mol/mol of Acanthamoeba myosin IA heavy chain and 1 mol/mol of turkey gizzard myosin heavy chain was incorporated. Evidence that the ligands were associated with the catalytic site included the observations that reaction occurred only with nucleotides that are substrates or products of the ATPase activity; that the reaction was blocked by pyrophosphate which is an inhibitor of the ATPase activity; that ATP was bound as ADP; and that label was probably restricted to a single peptide following limited subtilisin proteolysis of labeled Acanthamoeba myosin IA heavy chain and extensive cleavage with CNBr and trypsin of labeled turkey gizzard myosin heavy chain

Reaction products of densified silica fume agglomerates in concrete

International Nuclear Information System (INIS)

Diamond, Sidney; Sahu, Sadananda; Thaulow, Niels

2004-01-01

Most silica fume currently used in concrete is in the dry densified form and consists of agglomerates of sizes between 10 μm and several millimeters. Many of these agglomerates may break down only partially in normal concrete mixing. Examination of various mature silica-fume-bearing concretes using backscatter mode scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) analysis shows that such agglomerates have reacted in situ and given rise to recognizable types of reaction products filling the space within the original outline of the agglomerate. One type is 'quiescent', and usually shows no evidence of volume instability. EDX spectra indicate that the product formed within such grains is C-S-H of very low Ca/Si ratio, with modest alkali contents. Other silica fume agglomerates may undergo a distinct alkali-silica-type reaction (ASR), with the reaction product found within the original outline of the agglomerate having significantly less calcium and usually much higher alkali contents than the quiescent type. Such reacted agglomerates show evidence of local expansion, shrinkage cracking (on drying), and other features common to ASR. Both types may be found within the same concrete, sometimes in close proximity. It further appears that exposure to seawater may convert previously formed reaction products of silica fume agglomerates to magnesium silicate hydrates

The Bivalve Production Chain in Santa Catarina, Brazil, and its Management and Operational Limitations

OpenAIRE

Gallon, Alessandra Vasconcelos; Universidade Federal do Ceará (UFC); Nascimento, Cristiano; Universidade Federal do Paraná - UFPR; Pfitscher, Elisete Dahmer; Universidade Federal de Santa Catarina

2011-01-01

Bivalve farming (mussels and oysters), a major component in the socio-economic development of the state of Santa Catarina, Brazil, combines the activities of public and private agencies in fish farming. Current analysis deals with the management and the operational limitations of the local bivalve production chain. Current exploratory research, undertaken by direct observations and the literature on the subject, employs data quality. Results show that the bivalve production chain, comprising ...

Bacterial analysis of combined periodontal-endodontic lesions by polymerase chain reaction-denaturing gradient gel electrophoresis.

Science.gov (United States)

Xia, Minghui; Qi, Qingguo

2013-01-01

We used denaturing gradient gel electrophoresis (DGGE) to compare bacterial profiles in periodontium and root canals of teeth with combined periodontal-endodontic lesions. Samples of dental plaque and necrotic pulp were collected from thirteen extracted teeth with advanced periodontitis. Genomic DNA was extracted for polymerase chain reaction (PCR) analysis using universal bacterial primers. The PCR products were then loaded onto DGGE gels to obtain fractionated bands. Characteristic DGGE bands were excised and DNA was cloned and sequenced. The number of bands, which indicates the number of bacterial species, was compared between dental plaques and necrotic pulp tissues from the same tooth. Although the difference was statistically significant (P bacteria species were present in both the periodontal pockets and root canals of the same tooth; however, periodontal bacteria did not always invade the root canals, and some bacteria in root canals were not present in periodontal pockets of the same tooth. In some teeth, unique bacteria in root canals had not passed from periodontal pockets. A basic local alignment search tool (BLAST) sequence search in Genbank indicated that new bacteria species were present in periodontal pockets and root canals. Their characteristics must thus be further analyzed.

Top of the food chain: Product services in the food industry

OpenAIRE

Dixon, Andrew M.; Simon, Matthew

2001-01-01

This paper aims to describe the environmental impact of the food industry supply chain and explore the potential for new product-service systems in the food sector, which has not been subject to a great deal of eco-design research. Data from a cross-sector analysis of UK industry, concentrating on the sectors representing the food industry supply chain, is utilised. These sectors are agriculture, food processing, retailing, food services, and kitchen equipment. The analysis combines economic ...

Rapid genomic fingerprinting of Lactococcus lactis strains by arbitrarily primed polymerase chain reaction with 32P and fluorescent labels.

OpenAIRE

Cancilla, M R; Powell, I B; Hillier, A J; Davidson, B E

1992-01-01

Arbitrarily primed polymerase chain reaction, with incorporation of either radioactive or fluorescent labels, was used as a rapid and sensitive method for obtaining genomic fingerprints of strains of Lactococcus lactis. Closely related strains produced almost identical fingerprints. Fingerprints of other strains showed only some similarities.

Radioinitiation of Chain Branched Reactions and its Sensitization; Amorcage sous rayonnement des reactions par ramification en chaine; sensibilisation du processus; Radiatsionnoe initsiirovanie tsennykh razvetvlennykh reaktsij i ego sensibilizatsiya; Radioiniciacion de reacciones en cadena ramificadas y medios para aumentar su sensibilidad

Energy Technology Data Exchange (ETDEWEB)

Barelko, E V; Kartashova, L I; Komarov, P N; Proskurnin, M A [Karpov Physico-Chemical Institute, Moscow, Union of Soviet Socialist Republics (Russian Federation)

1960-07-15

This paper describes the results of experiments by the writers with radioinitiation of chain branched reactions of the oxidation of organic compounds. The function of radiation as an initiating agent is described with reference to the oxidation of several unsaturated hydrocarbons and butanol. The reaction is self-accelerating and proceeds spontaneously after radiation has ceased. A detailed investigation was made of a process from oxidizing benzene, which has a high radiation resistance. The writers devised a method of sensitizing the radioinitiation of the oxidation of radiation-resistant substances by chemically inert but non-radiation-resistant substances. The main quantitative features of the process for the radiooxidation of benzene are stated to be the accumulation of various reaction products, and the effect of temperature, pressure, power and radiation dosage on the process of such accumulation. Information was obtained about the mechanism of the process. The design of circulating equipment is described. (author) [French] Dans ce memoire, les auteurs presentent les resultats d'une etude consacree a l'amorcage sous rayonnement de reactions, d'oxydation des composes organiques, par ramification en chaine. Ils montrent le role des rayonnements en tant qu'agents d'amorcage de la reaction, en citant comme exemples l'oxydation de certains hydrocarbures non satures et du butanol. La reaction possede un caractere d'auto-acceleration et continue spontanement lorsque l'action des rayonnements a cesse. La reaction d'oxydation du benzene a ete etudiee en detail; elle est caracterisee par la haute stabilite de la substance vis-a-vis de l'action des rayonnements. Les auteurs formulent les principes de la sensibilisation, par l'action de substances instables vis-a-vis des rayonnements de l'amorcage sous rayonnement de la reaction d'oxydation de substances stables vis-a-vis des rayonnements et chimiquement inertes. Le memoire fournit les caracteristiques quantitatives

Whole Blood Polymerase Chain Reaction in a Neonate with Disseminated Herpes Simplex Virus Infection and Liver Failure

Directory of Open Access Journals (Sweden)

Jennifer A. Scoble

2013-10-01

Full Text Available A late preterm neonate born by cesarean section with intact membranes presented at 9 days of life with shock and liver failure. Surface cultures were negative but whole blood polymerase chain reaction was positive for herpes simplex virus type 2, underscoring the value of this test in early diagnosis of perinatally acquired disseminated herpes simplex virus infection without skin lesions.

Experimental Study of Serpentinization Reactions

Science.gov (United States)

Cohen, B. A.; Brearley, A. J.; Ganguly, J.; Liermann, H.-P.; Keil, K.

2004-01-01

Current carbonaceous chondrite parent-body thermal models [1-3] produce scenarios that are inconsistent with constraints on aqueous alteration conditions based on meteorite mineralogical evidence, such as phase stability relationships within the meteorite matrix minerals [4] and isotope equilibration arguments [5, 6]. This discrepancy arises principally because of the thermal runaway effect produced by silicate hydration reactions (here loosely called serpentinization, as the principal products are serpentine minerals), which are so exothermic as to produce more than enough heat to melt more ice and provide a self-sustaining chain reaction. One possible way to dissipate the heat of reaction is to use a very small parent body [e.g., 2] or possibly a rubble pile model. Another possibility is to release this heat more slowly, which depends on the alteration reaction path and kinetics.

Diagnostic value of polymerase chain reaction analysis of skin biopsies in purpura fulminans.

Science.gov (United States)

Beau, Caroline; Vlassova, Natalia; Sarlangue, Jean; Brissaud, Olivier; Léauté-Labrèze, Christine; Boralevi, Franck

2013-01-01

Even though prompt diagnosis and treatment of purpura fulminans (PF) is essential to reduce mortality, early administration of antibiotics may preclude identification of the causative agent by standard bacterial cultures and thus render definitive diagnosis impossible. Here we present a case of an infant with PF and negative bacterial cultures for whom polymerase chain reaction (PCR) analysis of a cutaneous biopsy specimen obtained 4 days after initiation of antibiotics identified the genomic sequence of Neisseria meningitidis genogroup C. When bacterial cultures fail to provide useful information, PCR of skin biopsy specimens can be a valuable diagnostic tool in PF. © 2013 Wiley Periodicals, Inc.

Use of the polymerase chain reaction for detection of Fusarium graminearum in bulgur wheat

Directory of Open Access Journals (Sweden)

Carla Bertechini Faria

2012-03-01

Full Text Available The detection of mycotoxigenic fungi in foodstuff is important because their presence may indicate the possible associated mycotoxin contamination. Fusarium graminearum is a wheat pathogen and a producer of micotoxins. The polymerase chain reaction (PCR has been employed for the specific identification of F. graminearum. However, this methodology has not been commonly used for detection of F. graminearum in food. Thus, the objective of the present study was to develop a molecular methodology to detect F. graminearum in commercial samples of bulgur wheat. Two methods were tested. In the first method, a sample of this cereal was contaminated with F. graminearum mycelia. The genomic DNA was extracted from this mixture and used in a F. graminearum specific PCR reaction. The F. graminearum species was detected only in samples that were heavily contaminated. In the second method, samples of bulgur wheat were inoculated on a solid medium, and isolates having F. graminearum culture characteristics were obtained. The DNA extracted from these isolates was tested in F. graminearum specific PCR reactions. An isolate obtained had its trichothecene genotype identified by PCR. The established methodology could be used in surveys of food contamination with F. graminearum.

Chain reaction

International Nuclear Information System (INIS)

Newby-Fraser, A.R.

1979-01-01

This book covers a review of twenty years of nuclear research and development by the South Africa Atomic Energy Board. A wide spectrum of topics is covered, for example, uranium mining and production, the construction of the Safari-1 reactor as well as the Koeberg-1 reactor, and the irradiation of food and medical supplies

Multiplex Reverse Transcription-Polymerase Chain Reaction untuk Deteksi Cepat Virus Flu Burung H5N1 (MULTIPLEX REVERSE TRANSCRIPTION-POLYMERASE CHAIN REACTION FOR RAPID DETECTION OF H5N1 AVIAN INFLUENZA VIRUS

Directory of Open Access Journals (Sweden)

Raden Wasito

2015-05-01

Full Text Available Avian influenza virus subtype H5N1 (AIV H5N1 is highly pathogenic and fatal in poultry. The virusis still endemic with low virulence rate, although it may play a critical role in causing high morbidity andmortality rates in poultry in Indonesia. In general, diagnostic approach for AIV H5N1 is based onconventional serological and viral isolation methods that have the potential to produce consumings oftime and relatively expensive cost within the laboratory without compromising test utility. Thus, amolecular approach of multiplex reverse transcription-polymerase chain reaction (mRT-PCR was developedand applied for the detection of matrix gene type A influenza viruses, AIV subtype subtype H5hemagglutinin gene with simultaneous detection of N1 nucleoprotein gene. Thirty sera specimens fromthe diseased commercial chickens that were specifically amplified positive-RT-PCR for AIV H5N1 wereselected for mRT-PCR. The mRT-PCR products were visualized by agarose gel electrophoresis and consistedof DNA fragments of AIV of 245 bp, 545 bp and 343 bp for M, H5 and N1 genes, respectively. Thus, themRT-PCR that can rapidly differentiate simultaneously between these genes is very important for thecontrol and even eradication of AIV transmission in poultry in Indonesia.

Pricing-Decision and Coordination Contract considering Product Design and Quality of Recovery Product in a Closed-Loop Supply Chain

OpenAIRE

Qingming Zou; Guangyu Ye

2015-01-01

In a closed-loop supply chain consisting of a manufacturer and a retailer, this paper studies the pricing strategies and coordination mechanism of supply chain when the remanufacturing cost is random caused by the proportion of reusability parts in design stage and quality condition of recycling product. The results show that the wholesale price and retail price are negative correlation, while the recycling rate and total profit of supply chain system are positive correlation with the proport...

Stochastic production planning for a biofuel supply chain under demand and price uncertainties

International Nuclear Information System (INIS)

Awudu, Iddrisu; Zhang, Jun

2013-01-01

Highlights: ► The proposed stochastic model outperforms the deterministic model. ► The price of biofuel is modeled as Geometric Brownian Motion (GBM). ► The proposed model can be applied in any biofuel supply chain. -- Abstract: In this paper, we propose a stochastic production planning model for a biofuel supply chain under demand and price uncertainties. The supply chain consists of biomass suppliers, biofuel refinery plants and distribution centers. A stochastic linear programming model is proposed within a single-period planning framework to maximize the expected profit. Decisions such as the amount of raw materials purchased, the amount of raw materials consumed and the amount of products produced are considered. Demands of end products are uncertain with known probability distributions. The prices of end products follow Geometric Brownian Motion (GBM). Benders decomposition (BD) with Monte Carlo simulation technique is applied to solve the proposed model. To demonstrate the effectiveness of the proposed stochastic model and the decomposition algorithm, a representative supply chain for an ethanol plant in North Dakota is considered. To investigate the results of the proposed model, a simulation framework is developed to compare the performances of deterministic model and proposed stochastic model. The results from the simulation indicate the proposed model obtain higher expected profit than the deterministic model under different uncertainty settings. Sensitivity analyses are performed to gain management insight on how profit changes due to the uncertainties affect the model developed.

Recombinase Polymerase Amplification Compared to Real-Time Polymerase Chain Reaction Test for the Detection of Fasciola hepatica in Human Stool

Science.gov (United States)

Cabada, Miguel M.; Malaga, Jose L.; Castellanos-Gonzalez, Alejandro; Bagwell, Kelli A.; Naeger, Patrick A.; Rogers, Hayley K.; Maharsi, Safa; Mbaka, Maryann; White, A. Clinton

2017-01-01

Fasciola hepatica is the most widely distributed trematode infection in the world. Control efforts may be hindered by the lack of diagnostic capacity especially in remote endemic areas. Polymerase chain reaction (PCR)–based methods offer high sensitivity and specificity but require expensive technology. However, the recombinase polymerase amplification (RPA) is an efficient isothermal method that eliminates the need for a thermal cycler and has a high deployment potential to resource-limited settings. We report on the characterization of RPA and PCR tests to detect Fasciola infection in clinical stool samples with low egg burdens. The sensitivity of the RPA and PCR were 87% and 66%, respectively. Both tests were 100% specific showing no cross-reactivity with trematode, cestode, or nematode parasites. In addition, RPA and PCR were able to detect 47% and 26% of infections not detected by microscopy, respectively. The RPA adapted to a lateral flow platform was more sensitive than gel-based detection of the reaction products. In conclusion, the Fasciola RPA is a highly sensitive and specific test to diagnose chronic infection using stool samples. The Fasciola RPA lateral flow has the potential for deployment to endemic areas after further characterization. PMID:27821691

Transfusion reactions in pediatric compared with adult patients: a look at rate, reaction type, and associated products.

Science.gov (United States)

Oakley, Fredrick D; Woods, Marcella; Arnold, Shanna; Young, Pampee P

2015-03-01

The majority of reports on transfusion reactions address adult patients. Less is known about the types, incidence, and other clinical details of transfusion reactions in pediatric populations. Furthermore, to our knowledge, there have been no previous reports directly comparing these aspects between adults and pediatric patient populations to assess if there are differences. Between the period of January 1, 2011, and February 1, 2013, all reported adult and pediatric transfusion reactions at Vanderbilt University Medical Center (VUMC) were evaluated by transfusion medicine clinical service. The information was subsequently shared with the hemovigilance database. Data provided to hemovigilance included age, sex, blood product associated with the reaction, severity of the reaction, and the type of transfusion reactions. These were collated with hospital and blood bank information system-acquired data on overall admission and product transfusion. A total of 133,671 transfusions were performed at VUMC during the study period including 20,179 platelet (PLT) transfusions, 31,605 plasma transfusions, 79,933 red blood cell (RBC) transfusions, and 2154 cryoprecipitate transfusions. Over the same period, 108 pediatric and 277 adult transfusion reactions were recorded. This corresponds to an incidence of 6.2 reactions per 1000 transfusions within the pediatric (age reactions per 1000 transfusions within the adult population. In both adult and pediatric populations, transfusion reactions were most commonly associated with PLT, followed by RBC, and then plasma transfusions. Within the pediatric population, subset analysis identified multiple differences when compared to the adult population, including an increased incidence of allergic transfusion reactions (2.7/1000 vs. 1.1/1000, p reactions (1.9/1000 vs. 0.47/1000, p reactions (0.29/1000 vs. 0.078/1000, p reaction incidence was the same between sexes in adults, in pediatric patients, reactions were more common in male

Sensitivitas dan Spesifisitas Nested Polymerase Chain Reaction untuk Mendeteksi DNA Coxiella burnetii (SENSITIVITY AND SPECIFICITY OF NESTED POLYMERASE CHAIN REACTION FOR DETECTION OF COXIELLA BURNETII DNA

Directory of Open Access Journals (Sweden)

Trioso Purnawarman

2014-04-01

Full Text Available Sensitivity and specificity of nested polymerase chain reaction (nested PCR to detect Coxiella burnetii(C. burnetii DNA were studied. The primer system which consists of external primers (OMP1 and OMP2and internal primers (OMP3 and OMP4, was designed from the nucleotide sequence of the com I geneencoding for 27 kDa outer membrane protein and used to specifically amplify a 501 bp and 438 bp fragment.This nested PCR assay was 50 fold more sensitive than that of using PCR external primer only. TheNested PCR has a detection limit as low as 300 pg/?l. Specificity studies showed that nested PCR onlydetected C. burnetii DNA and did not happened Brucella abortus, Escherichia coli, Pseudomonas aeruginosaand Campylobacter Jejuni DNA. Nested PCR has high senstively and specificaly diagnostic method of C.burnetii as agent of Q fever disease.

Novel extracellular medium-chain-length polyhydroxyalkanoate depolymerase from Streptomyces exfoliatus K10 DSMZ 41693

DEFF Research Database (Denmark)

Martinez, Virginia; de Santos, Patricia Gómez; García-Hidalgo, Javier

2015-01-01

reaction product. Markedly, PhaZSex2 is able to degrade functionalized polymers containing thioester groups in the side chain (PHACOS), releasing functional thioester-based monomers and oligomers demonstrating the potentiality of this novel biocatalyst for the industrial production of enantiopure (R)-3...

The kinetics of the radiation-induced chain dechlorination of hexachloroethane in alcohols

International Nuclear Information System (INIS)

Sawai, Takeshi; Ohara, Naoki; Shimokawa, Toshinari

1978-01-01

The kinetics of the radiation-induced dechlorination of hexachloroethane was investigated in deoxygenated alcohol solutions. The major products were hydrogen chloride, pentachloroethane, 1,1,2,2-tetrachloroethane, tetrachloroethylene, and aldehydes or acetone. No 1,1,1,2-tetrachloroethane was observed. The radiation-chemical yields of these products and the disappearance of hexachloroethane were quite high; these facts indicate that a chain reaction is involved in these processes. After the hexachloroethane had effectively dechlorinated down to tetrachloro compounds, there were no marked changes in the lower chlorinated compound upon continuous irradiation. Tetrachloroethane was formed via pentachloroethane, but tetrachloroethylene was produced by means of C 2 Cl 5 →C 2 Cl 4 + cl reaction and the yield was particularly high in methanol compared with the other alcohols. The chain length of the dechlorination from hexachloroethane to pentachloroethane and from pentachloroethane to tetrachloroethane increased in the order of 2-propanol>ethanol>methanol. The G(-C 2 Cl 6 ) and G(products) were proportional to (dose rate)sup(-1/2), and the ratio of G(C 2 HCl 5 ) to G(C 2 Cl 4 ) was a constant in each alcohol solution, regardless of the dose rate. The α-hydroxy alkyl radical is the chain carrier for the dechlorination reaction of hexachloroethane in alcohol solutions. The relative rates of the dechlorination were found to be 1, 3, and 14 for C*H 2 OH (*: radical), CH 3 C*HOH (*: radical), and (CH 3 ) 2 C*OH (*: radical), respectively. The order in the rate is in agreement with that of the redox potential of these radicals. The effect of the irradiation temperature on the products yields was also examined. (auth.)

Residues of bioenergy production chains as soil amendments: Immediate and temporal phytotoxicity

NARCIS (Netherlands)

Gell, K.; Groenigen, van J.W.; Cayuela, M.L.

2011-01-01

The current shift towards bioenergy production increases streams of bioenergy rest-products (RPs), which are likely to end-up as soil amendments. However, their impact on soil remains unclear. In this study we evaluated crop phytotoxicity of 15 RPs from common bioenergy chains (biogas, biodiesel,

Differentiation of closely related but biologically distinct cherry isolates of Prunus necrotic ringspot virus by polymerase chain reaction.

Science.gov (United States)

Hammond, R W; Crosslin, J M; Pasini, R; Howell, W E; Mink, G I

1999-07-01

Prunus necrotic ringspot ilarvirus (PNRSV) exists as a number of biologically distinct variants which differ in host specificity, serology, and pathology. Previous nucleotide sequence alignment and phylogenetic analysis of cloned reverse transcription-polymerase chain reaction (RT-PCR) products of several biologically distinct sweet cherry isolates revealed correlations between symptom type and the nucleotide and amino acid sequences of the 3a (putative movement protein) and 3b (coat protein) open reading frames. Based upon this analysis, RT-PCR assays have been developed that can identify isolates displaying different symptoms and serotypes. The incorporation of primers in a multiplex PCR protocol permits rapid detection and discrimination among the strains. The results of PCR amplification using type-specific primers that amplify a portion of the coat protein gene demonstrate that the primer-selection procedure developed for PNRSV constitutes a reliable method of viral strain discrimination in cherry for disease control and will also be useful for examining biological diversity within the PNRSV virus group.

Detection by reverse transcriptase-polymerase chain reaction and molecular characterization of subtype B avian metapneumovirus isolated in Brazil.

Science.gov (United States)

Chacón, Jorge Luis; Brandão, Paulo E; Buim, Marcos; Villarreal, Laura; Ferreira, Antonio J Piantino

2007-10-01

Subtype B avian metapneumovirus (aMPV) was isolated and detected by reverse transcriptase-polymerase chain reaction (RT-PCR) in Brazilian commercial laying chicken flocks with no history of vaccination against aMPV and presenting respiratory signs and decreased egg production. RT-PCR results from samples from three affected flocks revealed that the three isolates were subtype B. Partial sequence analysis of the G glycoprotein gene confirmed that the samples belonged to subtype B and were not of the vaccine type. Comparison of nucleotide and amino acid sequences of the G gene of the three Brazilian aMPV samples with subtype B isolates from other countries revealed 95.1% to 96.1% identity. Nucleotide sequences showed 100% identity among the Brazilian subtype B samples and 95.6% identity with the subtype B vaccine strain used in Brazil. This work describes the circulation of subtype B aMPV in Brazil and discusses its importance in terms of disease epidemiology.

Energy Levels and Co-evolution of Product Innovation in Supply Chain Clusters

Science.gov (United States)

Ji, Guojun

In the last decade supply chain clusters phenomenon has emerged as a new approach in product innovation studies. This article makes three contributions to the approach by addressing some open issues. The first contribution is to explicitly incorporate the energy levels in the analysis. Hence, the unit of analysis is widened from sectoral systems of innovation to socio-technical systems. Hence, the unit of analysis is widened from sectoral systems of innovation to socio-technical systems. The second contribution is to suggest an analytical distinction between different evolution method, actors involved in them, and the institutions which guide actor's perceptions and activities. Thirdly, the article opens up the black box of institutions, making them an integral part of supply chain. The article provides a coherent conceptual multi-level perspective, using insights from sociology, institutional theory and innovation studies. The perspective is particularly useful to analyze long-term dynamics supply chain clusters phenomenon, shifts from one energy level to another and the co-evolution of product innovation.

Pelacakan Kasus Flu Burung pada Ayam dengan Reverse Transcriptase Polymerase Chain Reaction* (DETECTION OF AVIAN INFLUENZA IN CHICKENS BY REVERSE TRANSCRIPTASE POLYMERASE CHAIN REACTION

Directory of Open Access Journals (Sweden)

Gusti Ayu Yuniati Kencana

2013-07-01

Full Text Available Avian Influenza (AI or Bird Flu is a fatal zoonotic disease caused by highly pathogenic avian influenza(HPAI virus of H5N1 sub-type. The disease is still endemic in Indonesia. This study was conducted toinvestigate AI cases in chickens in Bali. Virus isolation was performed in 9 day-old embryonated chickeneggs, and then followed by serologic testing by haemaglutination (HA and Haemaglutination Inhibition(HI assay using standard microtiter procedure. All of the samples were further tested with reversetrancriptasepolymerase chain reaction (RT-PCR. All work has been done in the Biomedical and MolecularBiology Laboratory, Faculty of Veterinary Medicine, Udayana University, Denpasar, during the period2009-2011. A total of ten samples were examined A total of ten chicken samples consisting of 6 fieldsamples and 4 meat samples have been confirmed to be AIV H5N1. All field cases showed clinical signsand gross pathology that were typical to the infection of avian influenza. The result indicates that AI casesare still prevalent among chickens in Bali.

A primer on on-demand polymerase chain reaction technology.

Science.gov (United States)

Spencer, Maureen; Barnes, Sue; Parada, Jorge; Brown, Scott; Perri, Luci; Uettwiller-Geiger, Denise; Johnson, Helen Boehm; Graham, Denise

2015-10-01

Efforts to reduce health care-associated infections (HAIs) have grown in both scale and sophistication over the past few decades; however, the increasing threat of antimicrobial resistance and the impact of new legislation regarding HAIs on health care economics make the fight against them all the more urgent. On-demand polymerase chain reaction (PCR) technology has proven to be a highly effective weapon in this fight, offering the ability to accurately and efficiently identify disease-causing pathogens such that targeted and directed therapy can be initiated at the point of care. As a result, on-demand PCR technology has far-reaching influences on HAI rates, health care outcomes, hospital length of stay, isolation days, patient satisfaction, antibiotic stewardship, and health care economics. The basics of on-demand PCR technology and its potential to impact health care have not been widely incorporated into health care education and enrichment programs for many of those involved in infection control and prevention, however. This article serves as a primer on on-demand PCR technology and its ramifications. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Multiplex reverse transcription-polymerase chain reaction combined with on-chip electrophoresis as a rapid screening tool for candidate gene sets

DEFF Research Database (Denmark)

Wittig, Rainer; Salowsky, Rüdiger; Blaich, Stephanie

2005-01-01

Combining multiplex reverse transcription-polymerase chain reaction (mRT-PCR) with microfluidic amplicon analysis, we developed an assay for the rapid and reliable semiquantitative expression screening of 11 candidate genes for drug resistance in human malignant melanoma. The functionality of thi...

Supply chain configuration with co-ordinated product, process and logistics decisions : an approach based on Petri nets

NARCIS (Netherlands)

Zhang, Lianfeng (Linda); You, Xiao; Jiao, Jianxin (Roger); Helo, Petri

2009-01-01

Supply chain configuration lends itself to be an effective means to deal with product differentiation and customisation throughout a supply chain network. It essentially entails the instantiation of a generic supply chain network to specific supply chains in accordance with diverse customer

Stochastic thermodynamics and entropy production of chemical reaction systems

Science.gov (United States)

Tomé, Tânia; de Oliveira, Mário J.

2018-06-01

We investigate the nonequilibrium stationary states of systems consisting of chemical reactions among molecules of several chemical species. To this end, we introduce and develop a stochastic formulation of nonequilibrium thermodynamics of chemical reaction systems based on a master equation defined on the space of microscopic chemical states and on appropriate definitions of entropy and entropy production. The system is in contact with a heat reservoir and is placed out of equilibrium by the contact with particle reservoirs. In our approach, the fluxes of various types, such as the heat and particle fluxes, play a fundamental role in characterizing the nonequilibrium chemical state. We show that the rate of entropy production in the stationary nonequilibrium state is a bilinear form in the affinities and the fluxes of reaction, which are expressed in terms of rate constants and transition rates, respectively. We also show how the description in terms of microscopic states can be reduced to a description in terms of the numbers of particles of each species, from which follows the chemical master equation. As an example, we calculate the rate of entropy production of the first and second Schlögl reaction models.

The Use of Supply Chains and Supply Chain Management in the ...

African Journals Online (AJOL)

Dr Peter Schmitz

supply chain management to guide the production of maps. Supply chain management can ... Distribution and logistics. Product flow. Information flow and Money. The Firm. Data from supplier(s) ..... In Global Supply Chains: Developing Skills ...

Detection and traceability of genetically modified organisms in the food production chain.

Science.gov (United States)

Miraglia, M; Berdal, K G; Brera, C; Corbisier, P; Holst-Jensen, A; Kok, E J; Marvin, H J P; Schimmel, H; Rentsch, J; van Rie, J P P F; Zagon, J

2004-07-01

Both labelling and traceability of genetically modified organisms are current issues that are considered in trade and regulation. Currently, labelling of genetically modified foods containing detectable transgenic material is required by EU legislation. A proposed package of legislation would extend this labelling to foods without any traces of transgenics. These new legislations would also impose labelling and a traceability system based on documentation throughout the food and feed manufacture system. The regulatory issues of risk analysis and labelling are currently harmonised by Codex Alimentarius. The implementation and maintenance of the regulations necessitates sampling protocols and analytical methodologies that allow for accurate determination of the content of genetically modified organisms within a food and feed sample. Current methodologies for the analysis of genetically modified organisms are focused on either one of two targets, the transgenic DNA inserted- or the novel protein(s) expressed- in a genetically modified product. For most DNA-based detection methods, the polymerase chain reaction is employed. Items that need consideration in the use of DNA-based detection methods include the specificity, sensitivity, matrix effects, internal reference DNA, availability of external reference materials, hemizygosity versus homozygosity, extrachromosomal DNA, and international harmonisation. For most protein-based methods, enzyme-linked immunosorbent assays with antibodies binding the novel protein are employed. Consideration should be given to the selection of the antigen bound by the antibody, accuracy, validation, and matrix effects. Currently, validation of detection methods for analysis of genetically modified organisms is taking place. In addition, new methodologies are developed, including the use of microarrays, mass spectrometry, and surface plasmon resonance. Challenges for GMO detection include the detection of transgenic material in materials

Mass formula dependence of calculated spallation reaction product distributions

International Nuclear Information System (INIS)

Nishida, Takahiko; Nakahara, Yasuaki

1990-01-01

A new version of the spallation reaction simulation code NUCLEUS was developed by incorporating Uno and Yamada's mass formula. This version was used to calculate the distribution of products from the spallation of uranium nuclei by high-energy protons. The dependence of the distributions on the mass formula was examined by comparing the results with those from the original version, which is based on Cameron's mass formula and the mass table compiled by Wapstra et al. As regards the fission component of spallation products, the new version reproduces the reaction product data obtained from thin foil experiments much better, especially on the neutron excess side. (orig.) [de

Wicked problems: a value chain approach from Vietnam's dairy product.

Science.gov (United States)

Khoi, Nguyen Viet

2013-12-01

In the past few years, dairy industry has become one of the fastest growing sectors in the packaged food industry of Vietnam. However, the value-added creation among different activities in the value chain of Vietnam dairy sector is distributed unequally. In the production activities, the dairy farmers gain low value-added rate due to high input cost. Whereas the processing activities, which managed by big companies, generates high profitability and Vietnamese consumers seem to have few choices due to the lack of dairy companies in the market. These wicked problems caused an unsustainable development to the dairy value chain of Vietnam. This paper, therefore, will map and analyze the value chain of the dairy industry in Vietnam. It will also assess the value created in each activity in order to imply solutions for a sustainable development of Vietnam's dairy industry. M10, M11.

Quantitation of RHD by real-time polymerase chain reaction for determination of RHD zygosity and RHD mosaicism/chimerism

DEFF Research Database (Denmark)

Krog, Grethe Risum; Clausen, Frederik Banch; Dziegiel, Morten Hanefeld

2007-01-01

Determination of RHD zygosity of the spouse is crucial in preconception counseling of families with history of hemolytic disease of the fetus and newborn caused by anti-D. RHD zygosity can be determined by quantitative real-time polymerase chain reaction (PCR) basically by determining RHD dosage,......, and this feature is relevant in investigating RHD mosaicism and chimerism....

Efficient odd straight medium chain free fatty acid production by metabolically engineered Escherichia coli.

Science.gov (United States)

Wu, Hui; San, Ka-Yiu

2014-11-01

Free fatty acids (FFAs) can be used as precursors for the production of biofuels or chemicals. Different composition of FFAs will be useful for further modification of the biofuel/biochemical quality. Microbial biosynthesis of even chain FFAs can be achieved by introducing an acyl-acyl carrier protein thioesterase gene into E. coli. In this study, odd straight medium chain FFAs production was investigated by using metabolic engineered E. coli carrying acyl-ACP thioesterase (TE, Ricinus communis), propionyl-CoA synthase (Salmonella enterica), and β-ketoacyl-acyl carrier protein synthase III (four different sources) with supplement of extracellular propionate. By using these metabolically engineered E. coli, significant quantity of C13 and C15 odd straight-chain FFAs could be produced from glucose and propionate. The highest concentration of total odd straight chain FFAs attained was 1205 mg/L by the strain HWK201 (pXZ18, pBHE2), and 85% of the odd straight chain FFAs was C15. However, the highest percentage of odd straight chain FFAs was achieved by the strain HWK201 (pXZ18, pBHE3) of 83.2% at 48 h. This strategy was also applied successfully in strains carrying different TE, such as the medium length acyl-ACP thioesterase gene from Umbellularia californica. C11 and C13 became the major odd straight-chain FFAs. © 2014 Wiley Periodicals, Inc.

Identification of reaction products from reactions of free chlorine with the lipid-regulator gemfibrozil.

Science.gov (United States)

Krkošek, Wendy H; Koziar, Stephen A; White, Robert L; Gagnon, Graham A

2011-01-01

High global consumption rates have led to the occurrence of pharmaceutically active compounds (PhACs) in wastewater. The use of chlorine to disinfect wastewater prior to release into the environment may convert PhACs into uncharacterized chlorinated by-products. In this investigation, chlorination of a common pharmaceutical, the antihyperlipidemic agent gemfibrozil, was documented. Gemfibrozil (2,2-dimethyl-5-(2,5-dimethylphenoxy)pentanoic acid) was reacted with sodium hypochlorite and product formation was monitored by gas chromatography-mass spectrometry (GC-MS). The incorporation of one, two or three chlorine atoms into the aromatic region of gemfibrozil was demonstrated using negative-ion electrospray ionization mass spectrometry (ESI-MS) and tandem mass spectrometry (ESI-MS/MS). Further analysis using (1)H nuclear magnetic resonance (NMR) spectroscopy identified the reaction products as 4'-ClGem (5-(4-chloro-2,5-dimethylphenoxy)-2,2-dimethylpentanoic acid) 4',6'-diClGem (5-(4,6-dichloro-2,5-dimethylphenoxy)-2,2-dimethylpentanoic acid), and 3',4',6'-triClGem (5-(3,4,6-trichloro-2,5-dimethylphenoxy)-2,2-dimethylpentanoic acid), products consistent with electrophilic aromatic substitution reactions. The rapid reaction of gemfibrozil with free chlorine at pH conditions relevant to water treatment indicates that a mixture of chlorinated gemfibrozils is likely to be found in wastewater disinfected with chlorine. Copyright © 2010 Elsevier Ltd. All rights reserved.

Comparison of isoelectric focusing and polymerase chain reaction for the detection of β-lactamases

Directory of Open Access Journals (Sweden)

Sharma J

2010-01-01

Full Text Available Extended spectrum β-lactamases (ESBLs have been observed in virtually all the species of family Enterobacteriaceae. Threat posed by antibiotic resistance because of ESBLs is more serious as a number of technical problems are associated with the detection of these enzymes. Although a number of detection methods have been designed for ESBLs, every method has its own benefits and shortcomings as well. In earlier days, isoelectric focusing (IEF was used as the gold standard for ESBL detection. This study was undertaken to compare IEF with polymerase chain reaction, a method which has been extensively used for ESBL detection these days.

Polymerase chain reaction-based detection of myc transduction in feline leukemia virus-infected cats.

Science.gov (United States)

Sumi, Ryosuke; Miyake, Ariko; Endo, Taiji; Ohsato, Yoshiharu; Ngo, Minh Ha; Nishigaki, Kazuo

2018-04-01

Feline lymphomas are associated with the transduction and activation of cellular proto-oncogenes, such as c-myc, by feline leukemia virus (FeLV). We describe a polymerase chain reaction assay for detection of myc transduction usable in clinical diagnosis. The assay targets c-myc exons 2 and 3, which together result in a FeLV-specific fusion gene following c-myc transduction. When this assay was conducted on FeLV-infected feline tissues submitted for clinical diagnosis of tumors, myc transduction was detected in 14% of T-cell lymphoma/leukemias. This newly established system could become a useful diagnostic tool in veterinary medicine.

Two-stage medium chain fatty acid (MCFA) production from municipal solid waste and ethanol

NARCIS (Netherlands)

Grootscholten, T.I.M.; Strik, D.P.B.T.B.; Steinbusch, K.J.J.; Buisman, C.J.N.; Hamelers, B.

2014-01-01

Chain elongation is an anaerobic fermentation that produces medium chain fatty acids (MCFAs) from volatile fatty acids and ethanol. These MCFAs can be used as biochemical building blocks for fuel production and other chemical processes. Producing MCFAs from the organic fraction of municipal solid

The identification of zones of amplification of disruptions in network supply chains of metallurgic products

Directory of Open Access Journals (Sweden)

M. Kramarz

2015-01-01

Full Text Available An increase in the number of participants in a supply chain and network relations results in an increase in the complexity of the entire logistic and production system. Consequently, there appear additional potential sources of disruptions in material flows. The aim of the research presented in the article is to identify the zones of amplification of disruptions in network supply chains of metallurgic products.

Sustainable Palm Oil Production For Bioenergy Supply Chain

OpenAIRE

Ng, Wai Kiat

2009-01-01

A bioenergy supply chain is formed by many parts which from the raw material, biomass feedstock until the distribution and utilisation. The upstream activity is always managed in a sustainable way in order to be capable enough to support the downstream activity. In this dissertation, the sustainable production of palm oil is focused and researched through problem identification and solving by using the operation management perspective and practices. At first, the global biomass industry is st...

Firm Productivity, Organizational Choice and Global Value Chain

OpenAIRE

Anna Giunta; Domenico Scalera; Francesco Trivieri; Jeffrey B. Nugent; Mariarosaria Agostino

2011-01-01

Based upon insights of the global value chain literature, the aim of this paper is to investigate the impact of being a supplier firm on labour productivity. The country of analysis is Italy, historically characterized by a very strong division of labour among firms. We make use of a unique database, which collects information on several organizational, structural and performance variables of a representative sample of more than 3000 Italian manufacturing firms, spanning the period 1998-2006....

Reaction kinetics, reaction products and compressive strength of ternary activators activated slag designed by Taguchi method

NARCIS (Netherlands)

Yuan, B.; Yu, Q.L.; Brouwers, H.J.H.

2015-01-01

This study investigates the reaction kinetics, the reaction products and the compressive strength of slag activated by ternary activators, namely waterglass, sodium hydroxide and sodium carbonate. Nine mixtures are designed by the Taguchi method considering the factors of sodium carbonate content

Phenylalanine 445 within oxidosqualene-lanosterol cyclase from Saccharomyces cerevisiae influences C-Ring cyclization and deprotonation reactions.

Science.gov (United States)

Wu, Tung-Kung; Liu, Yuan-Ting; Chiu, Feng-Hsuan; Chang, Cheng-Hsiang

2006-10-12

[reaction: see text] We describe the Saccharomyces cerevisiae oxidosqualene-lanosterol cyclase Phe445 site-saturated mutants that generate truncated tricyclic and altered deprotonation product profiles. Among these mutants, only polar side-chain group substitutions genetically complemented yeast viability and produced spatially related product diversity, supporting the Johnson model that cation-pi interactions between a carbocationic intermediate and an enzyme can be replaced by an electrostatic or polar side chain to stabilize the cationic intermediate, but with product differentiation.

Rapid polymerase chain reaction diagnosis of white-nose syndrome in bats.

Science.gov (United States)

Lorch, Jeffrey M; Gargas, Andrea; Meteyer, Carol Uphoff; Berlowski-Zier, Brenda M; Green, D Earl; Shearn-Bochsler, Valerie; Thomas, Nancy J; Blehert, David S

2010-03-01

A newly developed polymerase chain reaction (PCR)-based method to rapidly and specifically detect Geomyces destructans on the wings of infected bats from small quantities (1-2 mg) of tissue is described in the current study (methods for culturing and isolating G. destructans from bat skin are also described). The lower limits of detection for PCR were 5 fg of purified fungal DNA or 100 conidia per 2 mg of wing tissue. By using histology as the standard, the PCR had a diagnostic specificity of 100% and a diagnostic sensitivity of 96%, whereas the diagnostic sensitivity of culture techniques was only 54%. The accuracy and fast turnaround time of PCR provides field biologists with valuable information on infection status more rapidly than traditional methods, and the small amount of tissue required for the test would allow diagnosis of white-nose syndrome in live animals.

Rapid polymerase chain reaction diagnosis of white-nose syndrome in bats

Science.gov (United States)

Lorch, J.M.; Gargas, A.; Meteyer, C.U.; Berlowski-Zier, B. M.; Green, D.E.; Shearn-Bochsler, V.; Thomas, N.J.; Blehert, D.S.

2010-01-01

A newly developed polymerase chain reaction (PCR)-based method to rapidly and specifically detect Geomyces destructans on the wings of infected bats from small quantities (1-2 mg) of tissue is described in the current study (methods for culturing and isolating G. destructans from bat skin are also described). The lower limits of detection for PCR were 5 fg of purified fungal DNA or 100 conidia per 2 mg of wing tissue. By using histology as the standard, the PCR had a diagnostic specificity of 100% and a diagnostic sensitivity of 96%, whereas the diagnostic sensitivity of culture techniques was only 54%. The accuracy and fast turnaround time of PCR provides field biologists with valuable information on infection status more rapidly than traditional methods, and the small amount of tissue required for the test would allow diagnosis of white-nose syndrome in live animals.

Electrochemical Branched-DNA Assay for Polymerase Chain Reaction-Free Detection and Quantification of Oncogenes in Messenger RNA

Energy Technology Data Exchange (ETDEWEB)

Lee, Ai Cheng; Dai, Ziyu; Chen, Baowei; Wu, Hong; Wang, Jun; Zhang, Aiguo; Zhang, Lurong; Lim, Tit-Meng; Lin, Yuehe

2008-12-01

We describe a novel electrochemical branched-DNA (bDNA) assay for polymerase chain reaction (PCR)-free detection and quantification of p185 BCR-ABL leukemia fusion transcript in the population of messenger RNA (mRNA) extracted from cell lines. The bDNA amplifier carrying high loading of alkaline phosphatase (ALP) tracers was used to amplify targets signal. The targets were captured on microplate well surfaces through cooperative sandwich hybridization prior to the labeling of bDNA. The activity of captured ALP was monitored by square-wave voltammetric (SWV) analysis of the electroactive enzymatic product in the presence of 1-napthyl-phosphate. The specificity and sensitivity of assay enabled direct detection of target transcript in as little as 4.6 ng mRNA without PCR amplification. In combination with the use of a well-quantified standard, the electrochemical bDNA assay was capable of direct use for a PCR-free quantitative analysis of target transcript in total mRNA population. The approach thus provides a simple, sensitive, accurate and quantitative tool alternate to the RQ-PCR for early disease diagnosis.

Enhancement of Short Chain Fatty Acid Production from Millet Fibres ...

African Journals Online (AJOL)

Pharmacotherapy Group, Faculty of Pharmacy, University of Benin, Benin City, 300001 Nigeria. ... Methods: The effect of millet dietary fibre fermentation on production of short chain fatty ... fildes PYF enrichment solution was used as the .... where Pa is the peak area of SCFA, Ps is the ..... enzymatic- gravimetric method.

Emerging Risks in the Dutch Food Chain report on project 2: Application of indicator analyses on several critical points in the salmon production chain and identification of related data sources

OpenAIRE

Schelvis-Smit, A.A.M.; Poelman, M.; Schneider, O.

2008-01-01

An indicator analysis was performed on the fish production chain by assessing the indicators which may be of importance for the detection of emerging risks. The indicators were embedded in a “risk pathway”, in which the relations between different indicators could be illustrated. The risk pathways illustrate the main characteristics of the salmon production chain. However further research is required in order to develop further interaction with other sectors, and production chains to bring em...

On the semi-classical limit of scalar products of the XXZ spin chain

Energy Technology Data Exchange (ETDEWEB)

Jiang, Yunfeng; Brunekreef, Joren [Institut für Theoretische Physik, ETH Zürich,Wolfgang Pauli Strasse 27, CH-8093 Zürich (Switzerland)

2017-03-03

We study the scalar products between Bethe states in the XXZ spin chain with anisotropy |Δ|>1 in the semi-classical limit where the length of the spin chain and the number of magnons tend to infinity with their ratio kept finite and fixed. Our method is a natural yet non-trivial generalization of similar methods developed for the XXX spin chain. The final result can be written in a compact form as a contour integral in terms of Faddeev’s quantum dilogarithm function, which in the isotropic limit reduces to the classical dilogarithm function.