WorldWideScience

Sample records for cgo barrier layer

  1. Cathode-Electrolyte Interfaces with CGO Barrier Layers in SOFC

    DEFF Research Database (Denmark)

    Knibbe, Ruth; Hjelm, Johan; Menon, Mohan

    2010-01-01

    Electron microscopy characterization across the cathode–electrolyte interface of two different types of intermediate temperature solid oxide fuel cells (IT-SOFC) is performed to understand the origin of the cell performance disparity. One IT-SOFC cell had a sprayed-cosintered Ce0.90Gd0.01O1.95 (CGO......10) barrier layer, the other had a barrier layer deposited by pulsed laser deposition (PLD) CGO10. Scanning electron microscopy, transmission electron microscopy (TEM), and electron backscattered diffraction (EBSD) investigations conclude that the major source of the cell performance difference...... is attributed to CGO–YSZ interdiffusion in the sprayed-cosintered barrier layer. From TEM and EBSD work, a dense CGO10 PLD layer is found to be deposited epitaxially on the 8YSZ electrolyte substrate—permitting a small amount of SrZrO3 formation and minimizing CGO–YSZ interdiffusion....

  2. The Effect of a CGO Barrier Layer on the Performance of LSM/YSZ SOFC Cathodes

    DEFF Research Database (Denmark)

    Kammer Hansen, Kent; Menon, Mohan; Knudsen, Jesper

    2010-01-01

    by spin coating. Electrochemical impedance spectroscopy (EIS) was used to evaluate the performance of the LSM/YSZ composite electrodes. It was shown that the CGO barrier layer affects both the performance of the LSM/YSZ composite electrodes and the series resistance of the cells. This indicates...

  3. Analysis of the sintering stresses and shape distortion produced in co-firing of CGO-LSM/CGO bi-layer porous structures

    DEFF Research Database (Denmark)

    Ni, De Wei; Esposito, Vincenzo; Schmidt, Cristine Grings;

    electrochemical flue gas purification devices, multilayer structures with alternating porous layers of CGO and a LSM/CGO mixture are used to achieve specific functional requirements. In a manufacturing process of such ceramic multilayer devices, co-firing is one of the critical steps as many defects...... such as cracks, de-lamination and shape distortion can result as a consequence of sintering mismatch stresses caused by the strain rate difference between layers. This work seeks to understand the underlying mechanisms that occur during the co-firing of porous CGO-LSM/CGO bi-layer laminates, by evaluating...

  4. Effects of co-sintering in self-standing CGO/YSZ and CGO/ ScYSZ dense bi-layers

    DEFF Research Database (Denmark)

    Teocoli, Francesca; Ni, De Wei; Brodersen, Karen;

    2014-01-01

    -standing bi-layered electrolyte system. The combined use of thermo-mechanical analysis, optical dilatometry, and scanning electron microscopy ensures a systematic characterization of both the individual layers and CGO/YSZ and CGO/ScYSZ bi-layered laminates. The results of the co-firing process of the bi...

  5. Sintering process optimization for multi-layer CGO membranes by in situ techniques

    DEFF Research Database (Denmark)

    Kaiser, Andreas; Prasad, A.S.; Foghmoes, Søren Preben Vagn;

    2013-01-01

    The sintering of asymmetric CGO bi-layers (thin dense membrane on a porous support; Ce0.9Gd0.1O1.95-delta = CGO) with Co3O4 as sintering additive has been optimized by combination of two in situ techniques. Optical dilatometry revealed that bi-layer shape and microstructure are dramatically chang...

  6. Enhanced densification of thin tape cast Ceria-Gadolinium Oxide (CGO) layers by rheological optimization of slurries

    DEFF Research Database (Denmark)

    Marani, Debora; Esposito, Vincenzo; Sudireddy, Bhaskar Reddy;

    2017-01-01

    Optimized CGO-based slurries are formulated and shaped into thin dense layers via a tape-casting process. The formulation is adjusted with respect to the rheological behaviour. The internal structure and flow properties of slurries are explored with the aim of identifying the required conditions...... to obtain thin dense CGO layers at reduced sintering temperatures (1200 °C). We demonstrate a correlation between the rheological properties of the slurries, the sintering behaviour and the microstructure of the resulting tapes. Remarkably, a dense CGO layer less than 20 μm thick is obtained with a non......-congested slurry, having optimized ceramic loading and liquid-like behaviour....

  7. A high performance ceria based interdiffusion barrier layer prepared by spin-coating

    DEFF Research Database (Denmark)

    Plonczak, Pawel; Joost, Mario; Hjelm, Johan

    2011-01-01

    A multiple spin-coating deposition procedure of Ce0.9Gd0.1O1.95 (CGO) for application in solid oxide fuel cells (SOFCs) was developed. The thin and dense CGO layer can be employed as a barrier layer between yttria stabilised zirconia (YSZ) electrolyte and a (La, Sr)(Co, Fe)O3 based cathode....... The decomposition of the polymer precursor used in the spin-coating process was studied. The depositions were performed on anode supported half cells. By controlling the sintering temperature between each spin-coating process, dense and crack-free CGO films with a thickness of approximately 1 μm were obtained....... The successive steps of dense layer production was investigated by scanning electron microscopy. X-ray diffraction was employed to monitor the crystal structure of the CGO layer sintered at different temperatures. The described spin coated barrier layer was evaluated using an anode supported cell...

  8. Synthesis and characterization of 2D layered gadolinium-doped cerium oxide (CGO) nanomaterials

    DEFF Research Database (Denmark)

    Poras Reis de Moraes, Leticia; Marani, Debora; Esposito, Vincenzo;

    2016-01-01

    for the design andfabrication of nanomaterials in many applications. Indeed, the interlayer gallery provides a flexible space toaccommodate various sized molecules (e.g. pollutants) and tune specific active sites at the atomic space (e.g.catalyst materials). The interest for 2D layered nanomaterials is also...... associated with the possibility ofobtaining via exfoliation ultra-thin nanosheets with lateral dimensions of hundreds of nanometres andthickness of few nanometres. This unique class of nanomaterials has shown many unprecedented propertiesmainly originating from the dimensional anisotropy and nano...

  9. A simple MOD method to grow a single buffer layer of Ce{sub 0.8}Gd{sub 0.2}O{sub 1.9} (CGO) for coated conductors

    Energy Technology Data Exchange (ETDEWEB)

    Liu Min, E-mail: Lm@bjut.edu.c [Institute for Superconducting and Electronic Materials, University of Wollongong, NSW 2522 (Australia); Key Laboratory of Advanced Functional Materials, Ministry of Education, College of Materials Science and Engineering, Beijing University of Technology, Beijing 100022 (China); Shi Dongqi, E-mail: dongqi@uow.edu.a [Institute for Superconducting and Electronic Materials, University of Wollongong, NSW 2522 (Australia); Suo Hongli; Ye Shuai; Zhao Yue; Zhu Yonghua [Key Laboratory of Advanced Functional Materials, Ministry of Education, College of Materials Science and Engineering, Beijing University of Technology, Beijing 100022 (China); Li Qi; Wang Lin; Jihyun Ahn [Institute for Superconducting and Electronic Materials, University of Wollongong, NSW 2522 (Australia); Zhou Meiling [Key Laboratory of Advanced Functional Materials, Ministry of Education, College of Materials Science and Engineering, Beijing University of Technology, Beijing 100022 (China)

    2009-03-15

    A single Ce{sub 0.8}Gd{sub 0.2}O{sub 1.9} (CGO) buffer layer was successfully grown on the home-made textured Ni-5 at.%W (Ni-5W) substrates for YBCO coated conductors by a simple metal-organic deposition (MOD) technique. The precursor solution was prepared using a newly developed process and only contained common metal-organic salts of both Ce and Gd dissolved into a propionic acid solvent. The precursor solution at 0.4 M concentration was spin coated on short samples of Ni-5W substrates and heat-treated at 1100 deg. C in a mixture gas of 5% H{sub 2} in Ar for an hour. X-ray studies indicated that the CGO films had good out-of-plane and in-plane textures with full-width-half-maximum values of 4.18 deg. and 6.19 deg., respectively. Atomic force microscope (AFM) investigations of the CGO films revealed that most of the grain boundary grooves on the Ni-5W surface were found to be well covered by CGO layers, which had a fairly dense and smooth microstructure without cracks and porosity. These results indicate that our MOD technique is very promising for further development of single buffer layer architecture for YBCO coated conductors, due to its low cost and simple process.

  10. Magnetron-Sputtered YSZ and CGO Electrolytes for SOFC

    Science.gov (United States)

    Solovyev, A. A.; Shipilova, A. V.; Ionov, I. V.; Kovalchuk, A. N.; Rabotkin, S. V.; Oskirko, V. O.

    2016-08-01

    Reactive magnetron sputtering has been used for deposition of yttria-stabilized ZrO2 (YSZ) and gadolinium-doped CeO2 (CGO) layers on NiO-YSZ commercial anodes for solid oxide fuel cells. To increase the deposition rate and improve the quality of the sputtered thin oxide films, asymmetric bipolar pulse magnetron sputtering was applied. Three types of anode-supported cells, with single-layer YSZ or CGO and YSZ/CGO bilayer electrolyte, were prepared and investigated. Optimal thickness of oxide layers was determined experimentally. Based on the electrochemical characteristics of the cells, it is shown that, at lower operating temperatures of 650°C to 700°C, the cells with single-layer CGO electrolyte are most effective. The power density of these fuel cells exceeds that of the cell based on YSZ single-layer electrolyte at the same temperature. Power densities of 650 mW cm-2 and 500 mW cm-2 at 700°C were demonstrated by cells with single-layer YSZ and CGO electrolyte, respectively. Significantly enhanced maximum power density was achieved in a bilayer-electrolyte single cell, as compared with cells with a single electrolyte layer. Maximum power density of 1.25 W cm-2 at 800°C and 1 W cm-2 at 750°C under voltage of 0.7 V were achieved for the YSZ/CGO bilayer electrolyte cell with YSZ and CGO thickness of about 4 μm and 1.5 μm, respectively. This signifies that the YSZ thin film serves as a blocking layer to prevent electrical current leakage in the CGO layer, leading to the overall enhanced performance. This performance is comparable to the state of the art for cells based on YSZ/CGO bilayer electrolyte.

  11. Spray pyrolysis of doped-ceria barrier layers for solid oxide fuel cells

    DEFF Research Database (Denmark)

    Szymczewska, Dagmara; Chrzan, Aleksander; Karczewski, Jakub

    2017-01-01

    of elements. The parameters of the fabrication process are linked to the measured area specific resistances of the symmetrical cells and the efficiency of the fuel cells. Results show, that application of 800 nm thick barrier effectively hinder negative reactions, while 400 nm thick layer is sufficient......Gadolinium doped ceria (Ce0.8Gd0.2O2 − x-CGO) layer fabricated by spray pyrolysis is investigated as the diffusion barrier for solid oxide fuel cell. It is deposited between the La0.6Sr0.4FeO3 − δ cathode and the yttria stabilized zirconia electrolyte to mitigate harmful interdiffusion...

  12. Method for forming a barrier layer

    Energy Technology Data Exchange (ETDEWEB)

    Weihs, Timothy P. (Baltimore, MD); Barbee, Jr., Troy W. (Palo Alto, CA)

    2002-01-01

    Cubic or metastable cubic refractory metal carbides act as barrier layers to isolate, adhere, and passivate copper in semiconductor fabrication. One or more barrier layers of the metal carbide are deposited in conjunction with copper metallizations to form a multilayer characterized by a cubic crystal structure with a strong (100) texture. Suitable barrier layer materials include refractory transition metal carbides such as vanadium carbide (VC), niobium carbide (NbC), tantalum carbide (TaC), chromium carbide (Cr.sub.3 C.sub.2), tungsten carbide (WC), and molybdenum carbide (MoC).

  13. On the porosity of barrier layers

    Directory of Open Access Journals (Sweden)

    J. Mignot

    2009-09-01

    Full Text Available Barrier layers are defined as the layer between the pycnocline and the thermocline when the latter are different as a result of salinity stratification. We present a revisited 2-degree resolution global climatology of monthly mean oceanic Barrier Layer (BL thickness first proposed by de Boyer Montégut et al. (2007. In addition to using an extended data set, we present a modified computation method that addresses the observed porosity of BLs. We name porosity the fact that barrier layers distribution can, in some areas, be very uneven regarding the space and time scales that are considered. This implies an intermittent alteration of air-sea exchanges by the BL. Therefore, it may have important consequences for the climatic impact of BLs. Differences between the two computation methods are small for robust BLs that are formed by large-scale processes. However, the former approach can significantly underestimate the thickness of short and/or localized barrier layers. This is especially the case for barrier layers formed by mesoscale mechanisms (under the intertropical convergence zone for example and along western boundary currents and equatorward of the sea surface salinity subtropical maxima. Complete characterisation of regional BL dynamics therefore requires a description of the robustness of BL distribution to assess the overall impact of BLs on the process of heat exchange between the ocean interior and the atmosphere.

  14. Composite layers for barrier coatings on polymers

    Science.gov (United States)

    Brochhagen, Markus; Vorkoetter, Christoph; Boeke, Marc; Benedikt, Jan

    2016-09-01

    Amorphous hydrogenated carbon (a-C:H), amorphous hydrogenated silicon (a-Si:H), and SiO2 thin films are of high interest because they can serve as a gas barrier on polymers. To understand how the coating changes the overall barrier properties of the thin film-polymer system, optical, mechanical, and barrier properties have to be studied. One of the important characteristic of such coatings is their compressive stress, which has beneficial as well as unwanted effects. The stress can cause deformation of the bulk material or de-lamination of the film. The mechanical stability can be improved and it is possible to reduce cracking due to elongation, as the compressive stress can compensate externally applied tensile strain. Stress and mechanical properties of composite layers can be manipulated directly by embedding nanoparticles in an amorphous matrix film. Therefore nanoparticles and amorphous layers are investigated before they can be assembled in a composite layer. Growth rates as well as optical and mechanical properties are explored in this work. An inductively coupled plasma source was used for all amorphous layers and the silicon nanoparticles with diameter around 5 nm were produced in a capacitively coupled plasma reactor. This work is supported by DFG within SFB-TR87.

  15. Characterization of LSM/CGO Symmetric Cells Modified by NOx Adsorbents for Electrochemical NOx Removal with Impedance Spectroscopy

    DEFF Research Database (Denmark)

    Shao, Jing; Kammer Hansen, Kent

    2013-01-01

    /CGO electrode by selectively trapping NO2 in the form of nitrate over the BaO sites and provided availability for a direct reduction of the stored nitrate. The BaO-Pt-Al2O3 layer enhanced the NOx adsorption and promoted the formation of NO2 due to the NO oxidation ability of the Pt catalyst, but hindered......This study uses electrochemical impedance spectroscopy (EIS) to characterize an LSM/CGO symmetric cell modified by NOx adsorbents for the application of electrochemical NOx reduction. Three cells were prepared and tested: a blank cell, a cell impregnated with BaO, and a cell coated with a Ba...

  16. Multi-scale analysis of the diffusion barrier layer of gadolinia-doped ceria in a solid oxide fuel cell operated in a stack for 3000 h

    Science.gov (United States)

    Morales, M.; Miguel-Pérez, V.; Tarancón, A.; Slodczyk, A.; Torrell, M.; Ballesteros, B.; Ouweltjes, J. P.; Bassat, J. M.; Montinaro, D.; Morata, A.

    2017-03-01

    The state-of-the-art materials for SOFCs are yttria-stabilized zirconia as electrolyte and lanthanum strontium cobalt ferrite as cathode. However, the formation of insulating phases between them requires the use of diffusion barriers, typically made of gadolinia doped ceria. The study of the stability of this layer during the fabrication and in operando is currently one of the major goals of the SOFC industry. In this work, the cation inter-diffusion at the cathode/barrier layer/electrolyte region is analysed for an anode-supported cell industrially fabricated by conventional techniques, assembled in a short-stack and tested under real operation conditions for 3000 h. A comprehensive study of this cell, and an equivalent non-operated one, is performed in order to understand the inter-diffusion mechanisms with possible effects on the final performance. The analyses evidence that the cation diffusion is occurring during the fabrication process. Despite the significant diffusion of Ce,Gd, Zr, Y and Sr cations, the formation of typically reported CGO-YSZ solid solution is not observed while the presence of isolated grains of SrZrO3 is proved. All in all, this study presents new insights into the stability of the typically employed diffusion barriers for solid oxide cells that will guide future strategies to improve their performance and durability.

  17. Ocean barrier layers' effect on tropical cyclone intensification.

    Science.gov (United States)

    Balaguru, Karthik; Chang, Ping; Saravanan, R; Leung, L Ruby; Xu, Zhao; Li, Mingkui; Hsieh, Jen-Shan

    2012-09-04

    Improving a tropical cyclone's forecast and mitigating its destructive potential requires knowledge of various environmental factors that influence the cyclone's path and intensity. Herein, using a combination of observations and model simulations, we systematically demonstrate that tropical cyclone intensification is significantly affected by salinity-induced barrier layers, which are "quasi-permanent" features in the upper tropical oceans. When tropical cyclones pass over regions with barrier layers, the increased stratification and stability within the layer reduce storm-induced vertical mixing and sea surface temperature cooling. This causes an increase in enthalpy flux from the ocean to the atmosphere and, consequently, an intensification of tropical cyclones. On average, the tropical cyclone intensification rate is nearly 50% higher over regions with barrier layers, compared to regions without. Our finding, which underscores the importance of observing not only the upper-ocean thermal structure but also the salinity structure in deep tropical barrier layer regions, may be a key to more skillful predictions of tropical cyclone intensities through improved ocean state estimates and simulations of barrier layer processes. As the hydrological cycle responds to global warming, any associated changes in the barrier layer distribution must be considered in projecting future tropical cyclone activity.

  18. Silicon based substrate with environmental/ thermal barrier layer

    Science.gov (United States)

    Eaton, Jr., Harry Edwin (Inventor); Allen, William Patrick (Inventor); Jacobson, Nathan S. (Inventor); Bansal, Nanottam P. (Inventor); Opila, Elizabeth J. (Inventor); Smialek, James L. (Inventor); Lee, Kang N. (Inventor); Spitsberg, Irene T. (Inventor); Wang, Hongyu (Inventor); Meschter, Peter Joel (Inventor)

    2002-01-01

    A barrier layer for a silicon containing substrate which inhibits the formation of gaseous species of silicon when exposed to a high temperature aqueous environment comprises a barium-strontium alumino silicate.

  19. Silicon based substrate with calcium aluminosilicate/thermal barrier layer

    Science.gov (United States)

    Eaton, Jr., Harry Edwin (Inventor); Allen, William Patrick (Inventor); Miller, Robert Alden (Inventor); Jacobson, Nathan S. (Inventor); Smialek, James L. (Inventor); Opila, Elizabeth J. (Inventor); Lee, Kang N. (Inventor); Nagaraj, Bangalore A. (Inventor); Wang, Hongyu (Inventor); Meschter, Peter Joel (Inventor)

    2001-01-01

    A barrier layer for a silicon containing substrate which inhibits the formation of gaseous species of silicon when exposed to a high temperature aqueous environment comprises a calcium alumino silicate.

  20. Silicon based substrate with environmental/thermal barrier layer

    Science.gov (United States)

    Eaton, Jr., Harry Edwin (Inventor); Allen, William Patrick (Inventor); Jacobson, Nathan S. (Inventor); Bansal, Narottam P. (Inventor); Opila, Elizabeth J. (Inventor); Smialek, James L. (Inventor); Lee, Kang N. (Inventor); Spitsberg, Irene T. (Inventor); Wang, Hongyu (Inventor); Meschter, Peter Joel (Inventor)

    2002-01-01

    A barrier layer for a silicon containing substrate which inhibits the formation of gaseous species of silicon when exposed to a high temperature aqueous environment comprises a barium-strontium alumino silicate.

  1. Sintering of bi-layered porous structures: Stress development and shape evolution

    DEFF Research Database (Denmark)

    Ni, De Wei; Esposito, Vincenzo; Ramousse, Severine;

    Ce0.9Gd0.1O1.95 (CGO) and (La, Sr)MnO3 (LSM) are electro-ceramics materials with high potential for several electrochemical applications such as solid Oxide Fuel Cell (SOFC), gas separation membranes, and flue gas purification application. In the latter case, these materials are shaped as thick...... porous layers and sintered by co-firing process. In this work, porous CGO and LSM/CGO single layers were prepared by tape casting, and CGO-LSM/CGO bi-layer structures were obtained by lamination. The shrinkage characteristics of individual layers were measured by optical dilatometry and the uniaxial...

  2. Nanostructured zirconia layers as thermal barrier coatings

    Directory of Open Access Journals (Sweden)

    Radu Robert PITICESCU

    2011-09-01

    Full Text Available The coatings obtained by thermal spray are used both as antioxidant and connection materials (e.g. MCrAlY type alloys as well as thermal barrier coatings (e.g. partially stabilized zirconia oxide with yttria oxide. This paper studies the characteristics of the coatings obtained with nanostructured powders by thermal spraying and air plasma jet metallization. Testing of coatings is done against the most disturbing factor, thermal shock. Structural changes occurring after thermal shock tests are highlighted by investigations of optical and electronic microscopy. The results obtained after quick thermal shock show a good morphological and surface behavior of the developed coatings.

  3. Fundamental Investigations Regarding Barrier Properties of Grafted PVOH Layers

    Directory of Open Access Journals (Sweden)

    Markus Schmid

    2012-01-01

    Full Text Available The current work focuses on fundamental investigations regarding the barrier properties of grafted PVOH layers produced by the Transfer Method. The layers (or papers used for the different experiments were produced and grafted during the course of this work. Papers with different types of PVOH (different Mowiol types were produced by coating. Experiments using different parameters (temperature, reaction duration, and concentration were performed using the Transfer Method. Contact angle measurements and Cobb60 measurements were carried out on the grafted and untreated PVOH layers. Furthermore, the water vapour transmission rate of the PVOH layers was determined. The results of this work showed that the method of chromatogeny or chromatogenic chemistry improves the water vapour barrier properties of grafted PVOH layers enormously.

  4. Arabian Sea Fronts and Barrier Layers

    Science.gov (United States)

    2015-09-30

    Shcherbina Applied Physics Laboratory 1013 NE 40th St. Seattle, WA 98105 phone: (206)897-1446 fax: (206)543-6785 email: ashcherbina...science questions are: 1. What combination of air-sea interactions and upper-ocean physical processes control mixed layer properties and upper ocean...to identify the optimal experimental site will commence in late 2015, tentatively followed by a reconnaissance deployment of autonomous instruments

  5. Room Temperature Magnetic Barrier Layers in Magnetic Tunnel Junctions

    Energy Technology Data Exchange (ETDEWEB)

    Nelson-Cheeseman, B. B.; Wong, F. J.; Chopdekar, R. V.; Arenholz, E.; Suzuki, Y.

    2010-03-09

    We investigate the spin transport and interfacial magnetism of magnetic tunnel junctions with highly spin polarized LSMO and Fe3O4 electrodes and a ferrimagnetic NiFe2O4 (NFO) barrier layer. The spin dependent transport can be understood in terms of magnon-assisted spin dependent tunneling where the magnons are excited in the barrier layer itself. The NFO/Fe3O4 interface displays strong magnetic coupling, while the LSMO/NFO interface exhibits clear decoupling as determined by a combination of X-ray absorption spectroscopy and X-ray magnetic circular dichroism. This decoupling allows for distinct parallel and antiparallel electrode states in this all-magnetic trilayer. The spin transport of these devices, dominated by the NFO barrier layer magnetism, leads to a symmetric bias dependence of the junction magnetoresistance at all temperatures.

  6. Remote forcing annihilates barrier layer in southeastern Arabian Sea

    Digital Repository Service at National Institute of Oceanography (India)

    Shenoi, S.S.C.; Shankar, D.; Shetye, S.R.

    thick barrier layer (BL) exists during March{April ow- ing to a surface layer of low-salinity waters advected earlier during December{January from the Bay of Bengal. The BL is almost annihilated by 7 April owing to upwelling. The relic BL that survives... is annihilated later in May by up- welling, and by the in ow of high-salinity waters from the north and by mixing due to stronger winds, which deepen the mixed layer. We present evidence from satellite data and arguments based on existing theories to show...

  7. Rheological analysis of stabilized cerium-gadolinium oxide (CGO) dispersions

    DEFF Research Database (Denmark)

    Marani, Debora; Hjelm, Johan; Wandel, Marie

    2014-01-01

    The objective of the present work is to generate general rheological criteria to investigate high solid loading dispersions suitable for the shaping of homogeneous ceramic bodies. Systematic analysis of the rheological properties of moderately low specific surface area (SSA) Ce0.9Gd0.1O3-δ (CGO10...

  8. Co-sintering of CGO/NIO-CGO bilayers for solid oxide fuel cell; Co-sinterizacao de bi-camadas anodo/eletrolito para celulas a combustivel de oxido solido

    Energy Technology Data Exchange (ETDEWEB)

    Neto, P.P.B.; Grilo, J.P.F.; Souza, G.L.; Macedo, D.A.; Paskocimas, C.A.; Nascimento, R.M., E-mail: pbritoneto@gmail.com [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2012-07-01

    Reducing the operating temperature of solid oxide fuel cells (SOFC) for the range between 500 and 700°C is one of the challenges which more has aroused the interest of research in SOFC in recent years. In this context, the bilayer anode/electrolyte composed of a porous support based on Ni-doped ceria (anode) and a ceria doped gadolinia (CGO) electrolyte, presents itself as one of the half-cell configurations of the most interest towards the production of electricity in the operating logic of a SOFC. In this work, CGO films were successfully prepared on NiO-CGO substrates using the resources of the screen-printing technique. The bi-layers were co-sintered between 1350 and 1450 ° C for 4 h and then characterized by scanning electron microscopy and energy dispersive X-ray spectroscopy (EDS). The results showed good adhesion at the film/substrate interface and no cracks in the films. (author)

  9. Atomic Layer Deposition Films as Diffusion Barriers for Silver Artifacts

    Science.gov (United States)

    Marquardt, Amy; Breitung, Eric; Drayman-Weisser, Terry; Gates, Glenn; Rubloff, Gary W.; Phaneuf, Ray J.

    2012-02-01

    Atomic layer deposition (ALD) was investigated as a means to create transparent oxide diffusion barrier coatings to reduce the rate of tarnishing for silver objects in museum collections. Accelerated aging by heating various thicknesses (5 to 100nm) of ALD alumina (Al2O3) thin films on sterling and fine silver was used to determine the effectiveness of alumina as a barrier to silver oxidation. The effect of aging temperature on the thickness of the tarnish layer (Ag2S) created at the interface of the ALD coating and the bulk silver substrate was determined by reflectance spectroscopy and X-Ray Photoelectric Spectroscopy (XPS). Reflectance spectroscopy was an effective rapid screening tool to determine tarnishing rates and the coating's visual impact. X-Ray Photoelectric Spectroscopy (XPS), and Time of Flight Secondary Ion Mass Spectroscopy (ToF-SIMS) analysis showed a phase transformation in the Ag2S tarnish layer at 177 C and saturation in the thickness of the silver sulfide layer, indicating possible self-passivation of the tarnish layer.

  10. Effect of Ru/CGO versus Ni/CGO Co- Infiltration on the Performance and Stability of STN-Based SOFCs

    DEFF Research Database (Denmark)

    Ramos, Tania; Veltzé, Sune; Sudireddy, Bhaskar Reddy;

    2014-01-01

    Electrolyte supported cells (ESC), with Sc2O3-stabilized ZrO2 (ScSZ) electrolytes, Gd-doped ceria (CGO) or M/CGO (M = Ni, Ru) infiltrated Sr0.94Ti0.9Nb0.1O3 (STN94) anodes and LSM/YSZ cathodes, were evaluated for their initial performance and long-term stability. Power density for the Ru...

  11. Effect of an Opaque Reflecting Layer on the Thermal Behavior of a Thermal Barrier Coating

    Science.gov (United States)

    Spuckler, Charles M.

    2007-01-01

    A parametric study using a two-flux approximation of the radiative transfer equation was performed to examine the effects of an opaque reflective layer on the thermal behavior of a typical semitransparent thermal barrier coating on an opaque substrate. Some ceramic materials are semitransparent in the wavelength ranges where thermal radiation is important. Even with an opaque layer on each side of the semitransparent thermal barrier coating, scattering and absorption can have an effect on the heat transfer. In this work, a thermal barrier coating that is semitransparent up to a wavelength of 5 micrometers is considered. Above 5 micrometers wavelength, the thermal barrier coating is opaque. The absorption and scattering coefficient of the thermal barrier was varied. The thermal behavior of the thermal barrier coating with an opaque reflective layer is compared to a thermal barrier coating without the reflective layer. For a thicker thermal barrier coating with lower convective loading, which would be typical of a combustor liner, a reflective layer can significantly decrease the temperature in the thermal barrier coating and substrate if the scattering is weak or moderate and for strong scattering if the absorption is large. The layer without the reflective coating can be about as effective as the layer with the reflective coating if the absorption is small and the scattering strong. For low absorption, some temperatures in the thermal barrier coating system can be slightly higher with the reflective layer. For a thin thermal barrier coating with high convective loading, which would be typical of a blade or vane that sees the hot sections of the combustor, the reflective layer is not as effective. The reflective layer reduces the surface temperature of the reflective layer for all conditions considered. For weak and moderate scattering, the temperature of the TBC-substrate interface is reduced but for strong scattering, the temperature of the substrate is increased

  12. Chromium poisoning of LSM/YSZ and LSCF/CGO composite cathodes

    DEFF Research Database (Denmark)

    Bentzen, Janet Jonna; Høgh, Jens Valdemar Thorvald; Barfod, Rasmus;

    2009-01-01

    An electrochemical study of SOFC cathode degradation, due to poisoning by chromium oxide vapours, was performed applying 3-electrode set-ups. The cathode materials comprised LSM/YSZ and LSCF/CGO composites, whereas the electrolyte material was 8YSZ. The degradation of the cathode performance...... from 300 to 2,970 h. Both LSM/YSZ and LSCF/CGO cathodes were sensitive to chromium poisoning; LSCF/CGO cathodes to a lesser extent than LSM/YSZ. Humid air aggravated the degradation of the cathode performance. Post-mortem electron microscopic investigations revealed several Cr-containing compounds...

  13. Seasonal variation of the barrier layer in the PN section

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yuan; WU Dexing; LIN Xiaopei; SHAN Feng

    2009-01-01

    In this paper, we use the conductivity-temperature-depth (CTD) observation data and a three-dimensional ocean model in a seasonally-varying forcing field to study the barrier layer (BL) in the PN section in the East China Sea (ECS). The BL can be found along the PN section with obviously seasonal variability. In winter, spring and autumn, the BL occurs around the slope where the cold shelf water meets with the warm Kuroshio water. In summer, the BL can also be found in the shelf area near salinity front of the Changjiang (Yangtze) River Dilution Water (YRDW). Seasonal variations of BL in the PN section are caused by local hydrological characteristics and seasonal variations of atmospheric forcing. Strong vertical convection caused by sea surface cooling thickens the BL in winter and spring in the slope area. Due to the large discharge of Changjiang River in summer, the BL occurs extensively in the shelf region where the fresh YRDW and the salty bottom water meet and form a strong halocline above the seasonal thermocline. The formation mechanism of BL in the PN section can be explained by the vertical shear of different water masses, which is called the advection mechanism. The interannual variation of BL in summer is greatly affected by the YRDW. In the larger YRDW year (such as 1998), a shallow but much thicker BL existed on the shelf area.

  14. Low-Temperature Plasma-Assisted Atomic Layer Deposition of Silicon Nitride Moisture Permeation Barrier Layers.

    Science.gov (United States)

    Andringa, Anne-Marije; Perrotta, Alberto; de Peuter, Koen; Knoops, Harm C M; Kessels, Wilhelmus M M; Creatore, Mariadriana

    2015-10-14

    Encapsulation of organic (opto-)electronic devices, such as organic light-emitting diodes (OLEDs), photovoltaic cells, and field-effect transistors, is required to minimize device degradation induced by moisture and oxygen ingress. SiNx moisture permeation barriers have been fabricated using a very recently developed low-temperature plasma-assisted atomic layer deposition (ALD) approach, consisting of half-reactions of the substrate with the precursor SiH2(NH(t)Bu)2 and with N2-fed plasma. The deposited films have been characterized in terms of their refractive index and chemical composition by spectroscopic ellipsometry (SE), X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared spectroscopy (FTIR). The SiNx thin-film refractive index ranges from 1.80 to 1.90 for films deposited at 80 °C up to 200 °C, respectively, and the C, O, and H impurity levels decrease when the deposition temperature increases. The relative open porosity content of the layers has been studied by means of multisolvent ellipsometric porosimetry (EP), adopting three solvents with different kinetic diameters: water (∼0.3 nm), ethanol (∼0.4 nm), and toluene (∼0.6 nm). Irrespective of the deposition temperature, and hence the impurity content in the SiNx films, no uptake of any adsorptive has been observed, pointing to the absence of open pores larger than 0.3 nm in diameter. Instead, multilayer development has been observed, leading to type II isotherms that, according to the IUPAC classification, are characteristic of nonporous layers. The calcium test has been performed in a climate chamber at 20 °C and 50% relative humidity to determine the intrinsic water vapor transmission rate (WVTR) of SiNx barriers deposited at 120 °C. Intrinsic WVTR values in the range of 10(-6) g/m2/day indicate excellent barrier properties for ALD SiNx layers as thin as 10 nm, competing with that of state-of-the-art plasma-enhanced chemical vapor-deposited SiNx layers of a few hundred

  15. Tunable Staged Release of Therapeutics from Layer-by-Layer Coatings with Clay Interlayer Barrier

    Science.gov (United States)

    Min, Jouha; Braatz, Richard D.; Hammond, Paula T.

    2014-01-01

    In developing new generations of coatings for medical devices and tissue engineering scaffolds, there is a need for thin coatings that provide controlled sequential release of multiple therapeutics while providing a tunable approach to time dependence and the potential for sequential or staged release. Herein, we demonstrate the ability to develop a self-assembled, polymer-based conformal coating, built by using a water-based layer-by-layer (LbL) approach, as a dual-purpose biomimetic implant surface that provides staggered and/or sustained release of an antibiotic followed by active growth factor for orthopedic implant applications. This multilayered coating consists of two parts: a base osteoinductive component containing bone morphogenetic protein-2 (rhBMP-2) beneath an antibacterial component containing gentamicin (GS). For the fabrication of truly stratified composite films with the customized release behavior, we present a new strategy—implementation of laponite clay barriers—that allows for a physical separation of the two components by controlling interlayer diffusion. The clay barriers in a single-component GS system effectively block diffusion-based release, leading to approximately 50% reduction in bolus doses and 10-fold increase in the release timescale. In a dual-therapeutic composite coating, the top GS component itself was found to be an effective physical barrier for the underlying rhBMP-2, leading to an order of magnitude increase in the release timescale compared to the single-component rhBMP-2 system. The introduction of a laponite interlayer barrier further enhanced the temporal separation between release of the two drugs, resulting in a more physiologically appropriate dosing of rhBMP-2. Both therapeutics released from the composite coating retained their efficacy over their established release timeframes. This new platform for multi-drug localized delivery can be easily fabricated, tuned, and translated to a variety of implant

  16. The barrier layer in the southern region of the South China Sea

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    By analysing the CTD data in the southernregion of the South China Sea gathered during six cruises between 1989 and 1999, a barrier layer with seasonal variation just like what exists in the equatorial oceans is found in this region. It is the first discovery in such a marginal sea yet.It is strong in autunm and a little weak in summer and winter. The thicker the barrier layer, the higher the average temperature of the upper mixed layer. The region with the thicker barrier layer overlaps the region with the higher average temperature of the upper mixed layer, and accords with the thicker region of the warm pool in the South China Sea got from the Levitus data. The barrier layer in the southern region of the South China Sea has significant influence on the heat storage of the upper ocean there.``

  17. Nanostructured Cu-CGO anodes fabricated using a microwave-assisted glycine-nitrate process

    Science.gov (United States)

    Shaikh, Shabana P. S.; Somalu, Mahendra R.; Muchtar, Andanastuti

    2016-11-01

    This work reports a study of nanostructured copper-doped gadolinium cermet (Cu-CGO) composite anodes prepared via conventional synthesis (CS) and microwave-synthesis (MS) involving the glycine-nitrate process (GNP). A detailed investigation on the mechanical properties, electrical conductivity and electrochemical performance of prepared Cu0.5(Ce0.9Gd0.1)0.5O2-δ anodes is included. The prepared samples were characterized by techniques, such as XRD, EDX, SEM and electrical characterizations. After reduction in 10% H2 and 90% N2, the DC conductivities of the Cu-CGO anodes prepared via CS-GNP and MS-GNP are found to be 5.43×103 and 1.09×104 S cm-1 at 700 °C, respectively. The electrochemical performances of the spin-coated anode symmetrical cells sintered at 700 °C are evaluated at cell operating temperatures of 600, 700 and 800 °C. The lowest area specific resistance (ASR) values for the Cu-CGO/CGO/Cu-CGO symmetrical cells prepared via the MS-GNP route at operating temperatures of 600, 700 and 800 °C are found to be 0.34, 0.71 and 1.10 Ω cm2, respectively. The as-prepared (via MS-GNP) Cu-CGO anode exhibits excellent electrical and electrochemical performance consistent with the uniform nanostructured morphology compared with the anode prepared via CS-GNP.

  18. Electrochemical NOx reduction on an LSM/CGO symmetric cell modified by NOx adsorbents

    DEFF Research Database (Denmark)

    Shao, Jing; Kammer Hansen, Kent

    2013-01-01

    nitrate reduction. The cell with the BaO/Pt/Al2O3 layer exhibited a preferable performance at low temperatures (350 and 400 °C) and low voltages (1.5 to 2 V) due to the NO oxidation ability of the Pt catalyst, although its performance was relatively poor at elevated temperatures and voltages due......This study investigated the effect of modifying a (La0.85Sr0.15)0.99MnO3 (LSM)/Ce0.9Gd0.1O1.95 (CGO) symmetric cell by NOx adsorbents on the electrochemical reduction of NOx under O2-rich conditions. The modification was based on a full ceramic cell structure without any noble metals. Three cells...... were prepared and tested: a blank cell, a cell impregnated with BaO, and a cell coated with a BaO/Pt/Al2O3 layer. The electrochemical reduction of NOx on the three cells was studied by conversion measurement, degradation testing, and microstructure characterization. The modification, either...

  19. Low resistance barrier layer for isolating, adhering, and passivating copper metal in semiconductor fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Weihs, Timothy P. (Baltimore, MD); Barbee, Jr., Troy W. (Palto Alto, CA)

    2002-01-01

    Cubic or metastable cubic refractory metal carbides act as barrier layers to isolate, adhere, and passivate copper in semiconductor fabrication. One or more barrier layers of the metal carbide are deposited in conjunction with copper metallizations to form a multilayer characterized by a cubic crystal structure with a strong (100) texture. Suitable barrier layer materials include refractory transition metal carbides such as vanadium carbide (VC), niobium carbide (NbC), tantalum carbide (TaC), chromium carbide (Cr.sub.3 C.sub.2), tungsten carbide (WC), and molybdenum carbide (MoC).

  20. Inter-Layer Energy Transfer through Wetting-Layer States in Bi-layer InGaAs/GaAs Quantum-Dot Structures with Thick Barriers

    DEFF Research Database (Denmark)

    Xu, Zhang-Cheng; Zhang, Ya-Ting; Hvam, Jørn Märcher

    2009-01-01

    The inter-layer energy transfer in a bi-layer InGaAs/GaAs quantum dot structure with a thick GaAs barrier is studied using temperature-dependent photoluminescence. The abnormal enhancement of the photoluminescence of the QDs in the layer with a larger amount of coverage at 110K is observed, which...

  1. Silicon based substrate with calcium aluminosilicate environmental/thermal barrier layer

    Science.gov (United States)

    Eaton, Jr., Harry Edwin (Inventor); Allen, William Patrick (Inventor); Miller, Robert Alden (Inventor); Jacobson, Nathan S. (Inventor); Smialek, James L. (Inventor); Opila, Elizabeth J. (Inventor); Lee, Kang N. (Inventor); Nagaraj, Bangalore A. (Inventor); Wang, Hongyu (Inventor); Meschter, Peter Joel (Inventor)

    2001-01-01

    A barrier layer for a silicon containing substrate which inhibits the formation of gaseous species of silicon when exposed to a high temperature aqueous environment comprises a calcium alumino silicate.

  2. Preparation and characterization of TiO2 barrier layers for dye-sensitized solar cells.

    Science.gov (United States)

    Zheng, Yichen; Klankowski, Steven; Yang, Yiqun; Li, Jun

    2014-07-09

    A TiO2 barrier layer is critical in enhancing the performance of dye-sensitized solar cells (DSSCs). Two methods to prepare the TiO2 barrier layer on fluorine-doped tin dioxide (FTO) surface were systematically studied in order to minimize electron-hole recombination and electron backflow during photovoltaic processes of DSSCs. The film structure and materials properties were correlated with the photovoltaic characteristics and electrochemical properties. In the first approach, a porous TiO2 layer was deposited by wet chemical treatment of the sample with TiCl4 solution for time periods varying from 0 to 60 min. The N719 dye molecules were found to be able to insert into the porous barrier layers. The 20 min treatment formed a nonuniform but intact TiO2 layer of ∼100-300 nm in thickness, which gave the highest open-circuit voltage VOC, short-circuit photocurrent density JSC, and energy conversion efficiency. But thicker TiO2 barrier layers by this method caused a decrease in JSC, possibly limited by lower electrical conductance. In the second approach, a compact TiO2 barrier layer was created by sputter-coating 0-15 nm Ti metal films on FTO/glass and then oxidizing them into TiO2 with thermal treatment at 500 °C in the air for 30 min. The dye molecules were found to only attach at the outer surface of the barrier layer and slightly increased with the layer thickness. These two kinds of barrier layer showed different characteristics and may be tailored for different DSSC studies.

  3. Glomerular endothelial surface layer acts as a barrier against albumin filtration

    NARCIS (Netherlands)

    Dane, M.J.; Berg, B.M. van den; Avramut, M.C.; Faas, F.G.; Vlag, J. van der; Rops, A.L.; Ravelli, R.B.; Koster, B.J.; Zonneveld, A.J. van; Vink, H.; Rabelink, T.J.

    2013-01-01

    Glomerular endothelium is highly fenestrated, and its contribution to glomerular barrier function is the subject of debate. In recent years, a polysaccharide-rich endothelial surface layer (ESL) has been postulated to act as a filtration barrier for large molecules, such as albumin. To test this hyp

  4. Functional barrier in two-layer recycled PP films for food packaging applications

    Science.gov (United States)

    Scarfato, P.; Di Maio, L.; Milana, M. R.; Feliciani, R.; Denaro, M.; Incarnato, L.

    2014-05-01

    A preliminary study on bi-layer virgin/contaminated polypropylene co-extruded films was performed in order to evaluate the possibility to realize an effective functional barrier in PP-based multi-layer systems. In particular, the specific migration in 10% v/v aqueous ethanol of two surrogate contaminants (phenyl-cyclohexane and benzophenone) contained in the contaminated layer across the PP functional barrier was measured at different times and the results were compared with those obtained from a contaminated mono-layer polypropylene film. Moreover, the thermal and mechanical performances of the produced films were investigated.

  5. Effect of W addition on the electroless deposited NiP(W) barrier layer

    Energy Technology Data Exchange (ETDEWEB)

    Tao, Yishi [State Key Laboratory of Metal Matrix Composites, Key Laboratory for Thin Film and Microfabrication Technology of the Ministry of Education, School of Material Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai (China); Hu, Anmin, E-mail: huanmin@sjtu.edu.cn [State Key Laboratory of Metal Matrix Composites, Key Laboratory for Thin Film and Microfabrication Technology of the Ministry of Education, School of Material Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai (China); Hang, Tao [State Key Laboratory of Metal Matrix Composites, Key Laboratory for Thin Film and Microfabrication Technology of the Ministry of Education, School of Material Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai (China); Peng, Li [Shanghai Entry-Exit Inspection and Quarantine Bureau (China); Li, Ming [State Key Laboratory of Metal Matrix Composites, Key Laboratory for Thin Film and Microfabrication Technology of the Ministry of Education, School of Material Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai (China)

    2013-10-01

    Electroless deposition of NiP, NiWP thin film on p-type Si as the barrier layer to prevent the diffusion of Cu into Si was investigated. The thermal stability of the Si/Ni(W)P/Cu layers were evaluated by measuring the changes of resistance of the samples after annealed at various temperatures. XRD was applied to detect the formation of Cu{sub 3}Si and evaluate the barrier performance of the layers. The results of XRD of the stacked Si/NiP/Cu, Si/NiWP-1/Cu, Si/NiWP–2/Cu films reveal that Cu atom could diffuse through NiP barrier layer at 450 °C, Cu could hardly diffuse through NiWP layer at 550 °C. This means that with W added in the layer, the barrier performance is improved. Although the resistance of Si/NiWP-1 and Si/NiWP-2 are higher than that of Si/NiP, the resistance of stacked layers of Si/NiWP-1/Cu and Si/NiWP–2/Cu are close to that of Si/NiP/Cu. This means that using NiWP as barrier layer is acceptable.

  6. Inter-Layer Energy Transfer through Wetting-Layer States in Bi-layer InGaAs/GaAs Quantum-Dot Structures with Thick Barriers

    Institute of Scientific and Technical Information of China (English)

    XU Zhang-Cheng; ZHANG Ya-Ting; J(φ)rn M. Hvam; Yoshiji Horikoshi

    2009-01-01

    The inter-layer energy transfer in a bi-layer InGaAs/GaAs quantum dot structure with a thick GaAs barrier is studied using temperature-dependent photoluminescence. The abnormal enhancement of the photoluminescence of the QDs in the layer with a larger amount of coverage at 110K is observed, which can be explained by considering the resonant F(o)rster energy transfer between the wetting layer states at elevated temperatures.

  7. Recombination barrier layers in solid-state quantum dot-sensitized solar cells

    KAUST Repository

    Roelofs, Katherine E.

    2012-06-01

    By replacing the dye in the dye-sensitized solar cell design with semiconductor quantum dots as the light-absorbing material, solid-state quantum dot-sensitized solar cells (ss-QDSSCs) were fabricated. Cadmium sulfide quantum dots (QDs) were grown in situ by successive ion layer adsorption and reaction (SILAR). Aluminum oxide recombination barrier layers were deposited by atomic layer deposition (ALD) at the TiO2/hole-conductor interface. For low numbers of ALD cycles, the Al2O3 barrier layer increased open circuit voltage, causing an increase in device efficiency. For thicker Al2O3 barrier layers, photocurrent decreased substantially, leading to a decrease in device efficiency. © 2012 IEEE.

  8. Thermally induced decomposition of B4C barrier layers in Mo/Si multilayer structures

    NARCIS (Netherlands)

    Bruijn, S.; van de Kruijs, R. W. E.; Yakshin, A. E.; Zoethout, E.; F. Bijkerk,

    2010-01-01

    We investigate the influence of the Mo crystalline state (quasi-amorphous or crystalline) on the thermal stability of Mo/Si thin film multilayers with B4C diffusion barrier layers at either of the two interfaces. We find that multilayers containing amorphous Mo layers are more stable than those cont

  9. Impedance and Stability of M/CGO (M: Ni, Pd, Ru) Co-infiltrated Nb-doped SrTiO3 SOFC Anodes

    DEFF Research Database (Denmark)

    Ramos, Tania; Veltzé, Sune; Reddy Sudireddy, Bhaskar;

    2014-01-01

    at 850°C, 50% H2O/H2 decreased in the order Ni/CGO≫Pd/CGO > Ru/CGO. After 200h of exposure Ru/CGO not only continued to exhibit low impedance, with final total Rp ≅ 0.02 Ωcm2, but also negligible degradation. For comparison, Ni/CGO degraded close to a factor of 3 to ca. 0.25 Ωcm2 in an equivalent period...

  10. Investigation of Structure and Properties of Barrier Layers in Metals (Fe, Cu) at Low Temperatures

    Science.gov (United States)

    Kuterbekov, K. A.; Nurkenov, S. A.; Kislitsin, S. B.; Kuketayev, T. A.; Tussupbekova, A. K.

    2016-11-01

    Experimental studies of the effect of a barrier layer on the kinetics of thermally induced diffusion procesess and phase transformations in a layered Fe-Be syatem are investigated at the energy 1.6 MeV. Thermal stability of the barrier layer in the Fe:O+ system is validated and a possibility of its use as a subsurface layer for a beryllium coating is demonstrated. For the Cu:O+ system it is shown that the implanted layer in the matrix comes apart already at the annealing temperature 180°C and could not be used in a copper matrix as a subsurface barrier layer. For the first time, a method is proposed for retardation of diffusion and phase formation processes and realized in a layered iron - beryllium system using an implanted layer of oxygen ions. The sequence and characteristic times of thermally-induced phase-transformation processes taking place in the subsurface layers and in the bulk of the Fe (10 μm) systems: O+ - Be (0.7 μm) - 57Fe (0.1 μm) and Fe (10 μm) - Be (0.7 μm) - 57Fe (0.1 μm) are determined.

  11. Thick growing multilayer nanobrick wall thin films: super gas barrier with very few layers.

    Science.gov (United States)

    Guin, Tyler; Krecker, Michelle; Hagen, David Austin; Grunlan, Jaime C

    2014-06-24

    Recent work with multilayer nanocoatings composed of polyelectrolytes and clay has demonstrated the ability to prepare super gas barrier layers from water that rival inorganic CVD-based films (e.g., SiOx). In an effort to reduce the number of layers required to achieve a very low oxygen transmission rate (OTR (layer-by-layer (LbL) assembly. Buffering the chitosan solution and its rinse with 50 mM Trizma base increased the thickness of these films by an order of magnitude. The OTR of a 1.6-μm-thick, six-bilayer film was 0.009 cc/m(2)·day·atm, making this the best gas barrier reported for such a small number of layers. This simple modification to the LbL process could likely be applied more universally to produce films with the desired properties much more quickly.

  12. Barrier layers against oxygen transmission on the basis of electron beam cured methacrylated gelatin

    Science.gov (United States)

    Scherzer, Tom

    1997-08-01

    The development of barrier layers against oxygen transmission on the basis of radiation-curable methacrylated gelatin will be reported. The electron beam cured gelatin coatings show an extremely low oxygen permeability and a high resistance against boiling water. Moreover, the methacrylated gelatins possess good adhesion characteristics. Therefore, they are suited as barrier adhesives in laminates for food packaging applications. If substrate foils from biodegradable polymers are used, the development of completely biodegradable packaging materials seems to be possible.

  13. Characteristics of cerium-gadolinium oxide (CGO) suspensions as a function of dispersant and powder properties

    DEFF Research Database (Denmark)

    Phair, John; Lönnroth, Nadja; Lundberg, Mats;

    2009-01-01

    A series of concentrated suspensions ( = 0.18–0.34) of cerium-gadolinium oxide (CGO) in terpineol were prepared as a function of dispersant, powder surface area and solids concentration. The stability of the suspensions was assessed by rheological measurements including viscosity and oscillatory...

  14. High-flux Thin-film Nanofibrous Composite Ultrafiltration Membranes Containing Cellulose Barrier Layer

    Energy Technology Data Exchange (ETDEWEB)

    Ma, H.; Yoon, K; Rong, L; Mao, Y; Mo, Z; Fang, D; Hollander, Z; Gaiteri, J; Hsiao , B; Chu, B

    2010-01-01

    A novel class of thin-film nanofibrous composite (TFNC) membrane consisting of a cellulose barrier layer, a nanofibrous mid-layer scaffold, and a melt-blown non-woven substrate was successfully fabricated and tested as an ultrafiltration (UF) filter to separate an emulsified oil and water mixture, a model bilge water for on-board ship bilge water purification. Two ionic liquids: 1-butyl-3-methylimidazolium chloride and 1-ethyl-3-methylimidazolium acetate, were chosen as the solvent to dissolve cellulose under mild conditions. The regenerated cellulose barrier layer exhibited less crystallinity (determined by wide-angle X-ray diffraction, WAXD) than the original cotton linter pulps, but good thermal stability (determined by thermal gravimetric analysis, TGA). The morphology, water permeation, and mechanical stability of the chosen TFNCmembranes were thoroughly investigated. The results indicated that the polyacrylonitrile (PAN) nanofibrous scaffold was partially imbedded in the cellulose barrier layer, which enhanced the mechanical strength of the top barrier layer. The permeation flux of the cellulose-based TFNCmembrane was significantly higher (e.g. 10x) than comparable commercial UFmembranes (PAN10 and PAN400, Sepro) with similar rejection ratios for separation of oil/water emulsions. The molecular weight cut-off (MWCO) of TFNC membranes with cellulose barrier layer was evaluated using dextran feed solutions. The rejection was found to be higher than 90% with a dextran molecular weight of 2000 KDa, implying that the nominal pore size of the membrane was less than 50 nm. High permeation flux was also observed in the filtration of an emulsified oil/water mixture as well as of a sodium alginate aqueous solution, while high rejection ratio (above 99.5%) was maintained after prolonged operation. A variation of the barrier layer thickness could dramatically affect the permeation flux and the rejection ratio of the TFNCmembranes, while different sources of cellulose

  15. Nanosecond spin relaxation times in single layer graphene spin valves with hexagonal boron nitride tunnel barriers

    Science.gov (United States)

    Singh, Simranjeet; Katoch, Jyoti; Xu, Jinsong; Tan, Cheng; Zhu, Tiancong; Amamou, Walid; Hone, James; Kawakami, Roland

    2016-09-01

    We present an experimental study of spin transport in single layer graphene using atomic sheets of hexagonal boron nitride (h-BN) as a tunnel barrier for spin injection. While h-BN is expected to be favorable for spin injection, previous experimental studies have been unable to achieve spin relaxation times in the nanosecond regime, suggesting potential problems originating from the contacts. Here, we investigate spin relaxation in graphene spin valves with h-BN barriers and observe room temperature spin lifetimes in excess of a nanosecond, which provides experimental confirmation that h-BN is indeed a good barrier material for spin injection into graphene. By carrying out measurements with different thicknesses of h-BN, we show that few layer h-BN is a better choice than monolayer for achieving high non-local spin signals and longer spin relaxation times in graphene.

  16. Separated effects of ions, metastables and photons on the properties of barrier layers on polymers

    Science.gov (United States)

    Biskup, Beatrix; Boeke, Marc; Benedikt, Jan; von Keudell, Achim

    2016-09-01

    Analyses of a-C:H /a-Si:H multilayers on polymer substrates indicated that prolonged ion bombardment influences negatively the properties of the barrier layer, while a short plasma pretreatment can improve the barrier effect. This work is motivated by these results and investigates the influence of different reactive plasma components, namely ions, metastables and VUV-photons, on the properties of the grown barrier layer. To separate the different species and their influence on plasma pretreatment and film growth, we build a grid system, which repels the ions from the substrate, so that only metastables and VUV-photons have an effect on the layer. An integral part of this investigation is, to measure the photon fluxes to the substrate by an intensity calibrated VUV monochromator. For that, a differentially pumped monochromator with a spectral range 30 - 300 nm is used, where the two most prominent argon lines at 104.9 and 106.8 nm can be measured. In this approach we are able to study the different effects of the plasma species and also possible synergy effects, to improve the properties of the barrier layer. This work is supported by the DFG within the SFB-TR 87.

  17. Investigation of Top/bottom Electrode and Diffusion Barrier Layer for PZT thick film MEMS Sensors

    DEFF Research Database (Denmark)

    Pedersen, Thomas; Hindrichsen, Christian Carstensen; Lou-Møller, R.;

    2007-01-01

    In this work screen printed piezoelectric Ferroperm PZ26 lead zirconate titanate (PZT) thick film is used for two MEMS devices. A test structure is used to investigate several aspects regarding bottom and top electrodes. 450 nm ZrO2 thin film is found to be an insufficient diffusion barrier layer...

  18. Artificial pinning centers using the barrier layer of ordered nanoporous alumina templates

    DEFF Research Database (Denmark)

    Hallet, X.; Mátéfi-Tempfli, Stefan; Mátéfi-Tempfli, M.

    2009-01-01

    The barrier layer of self-ordered anodized aluminium oxide, which is grown from an aluminium foil, has been revealed by a selective chemical etching of the remaining aluminium. The surface obtained in this way consists of a triangular lattice of bumps with 100nm spacing, and heights of approximat...

  19. Probing Cu Diffusion Barrier Layers on Porous Low-Dielectric-Constant Films by Posireonium Annihilation Lifetime Spectroscopy

    Institute of Scientific and Technical Information of China (English)

    HU Yi-Fan; SUN Jia-Ning; Gidley D.W.

    2005-01-01

    @@ Two kinds of Cu diffusion barrier layers, sealedfilms and capped fi1ms, on nanoporous low-dielectric-constant filmsare investigated by positronium annihilation lifetime spectroscopy (PALS). We have found that the minimumthickness of Ta to form an effective diffusion barrier is affected by the pore size. The films with large poresrequire thick barrier layers to form effective diffusion barriers. In addition, a possible ultra-thin diffusion barrier,i.e. a plasma-induced densification layer, has also been investigated. The PALS data confirm that a porouslow-dielectric-constant thin film can be shrunk by exposure to plasma. This shrinkage is confined to a surfacelayer of collapsed pores and forms a dense layer. The dense layer tends to behave as Ps (positronium) diffusionbarriers. Indeed, the controlled thin "skin" layer could prevent Cu diffusion into the underlying dielectrics.

  20. Effects of Pt diffusion barrier layer on the interface reaction and electric properties of PZT film/Si ( 111 ) sample

    Institute of Scientific and Technical Information of China (English)

    ZHU, Yong-Fa(朱永法); CAO, Li-Li(曹立礼); YAN, Pei-Yu(阎培渝); LI, Long-Tu(李龙土); YI, Tao(易涛)

    2000-01-01

    The effects of the Pt diffusion barrier layer on the interface diffusion and reaction, crystallization, dielectric and ferroelectric properties of the PZT/Si(111) sample have been studied using XPS, AES and XRD techniques. The results indicate that the Pt diffusion barrier layer between the PZT layer and the Si substrate prohibits the formation of TiCx, TiSix and SiO2 species in the PZT layer. The Pt barrier layer also completely interrupts the diffusion of Si from the Si substrate into the PZT layer and impedes the diffusion of oxygen from air to the Si substrate greatly. Although the Pt layer can not prevent completely the diffusion and reaction between oxygen and silicon, it can prevent the formation of a stable SiO2 interface layer on the interface of PZT/Si. The Pt layer reacts with silicon to form PtSix species on the interface of Pt/Si, which can intensify the chemical binding strength between the Pt layer and the Si substrate. To play a good role as a diffusion barrier layer, the Pt barrier layer must be not thinner than 140 nm. The existence of the Pt layer not only promotes the crystallization of PZT layer to form a perovskite phase but also improves dielectric and ferroelectric performances of the PZT layer.

  1. Development of Barrier Layers for the Protection of Candidate Alloys in the VHTR

    Energy Technology Data Exchange (ETDEWEB)

    Levi, Carlos G. [Battelle Energy Alliance, LLC, Idaho Falls, ID (United States); Jones, J. Wayne [Battelle Energy Alliance, LLC, Idaho Falls, ID (United States); Pollock, Tresa M. [Battelle Energy Alliance, LLC, Idaho Falls, ID (United States); Was, Gary S. [Battelle Energy Alliance, LLC, Idaho Falls, ID (United States)

    2015-01-22

    The objective of this project was to develop concepts for barrier layers that enable leading candi- date Ni alloys to meet the longer term operating temperature and durability requirements of the VHTR. The concepts were based on alpha alumina as a primary surface barrier, underlay by one or more chemically distinct alloy layers that would promote and sustain the formation of the pro- tective scale. The surface layers must possess stable microstructures that provide resistance to oxidation, de-carburization and/or carburization, as well as durability against relevant forms of thermo-mechanical cycling. The system must also have a self-healing ability to allow endurance for long exposure times at temperatures up to 1000°C.

  2. Programme and retention characteristics of SONOS memory arrays with layered tunnel barrier

    Science.gov (United States)

    Golubović, D. S.; Vianello, E.; Arreghini, A.; Driussi, F.; van Duuren, M. J.; Akil, N.; Selmi, L.; Esseni, D.

    2008-07-01

    Layered tunnel barriers (T-ONO) might help circumvent retention limitations of nitride charge trapping devices (SONOS) programmed/erased by direct tunnelling without invoking high-K dielectrics in the gate stack. In order to establish to what extent the properties of a T-ONO tunnel layer influence the performance of SONOS memories, NOR memory arrays containing a silicon oxide/silicon nitride/silicon oxide T-ONO layer, a silicon nitride charge trapping layer and a silicon oxide blocking layer were fabricated and investigated. The T-ONO layer was formed using wet reoxidation of the silicon nitride, as this process is known to generate a lot of traps at the interface between silicon nitride and silicon oxide, as well as in the reoxidized portion of the silicon nitride itself. Besides standard memory measurements like programme/erase behaviour, endurance and retention, charge centroid extraction measurements were carried out in order to explain the retention behaviour and associate it with the position of the charge. It has been demonstrated that the performance of SONOS memories with a T-ONO layer strongly depends on the technological properties/quality of the T-ONO barrier which, therefore, may not be a universal solution to retention problems in SONOS devices.

  3. Electrical and materials characterization of tungsten-titanium diffusion barrier layers and alloyed silver metallization

    Science.gov (United States)

    Bhagat, Shekhar Kumar

    With the constant miniaturization of semiconductor devices, research is always ongoing to obtain the best materials and/or materials systems which fulfill all the requirements of an ideal interconnect. Silver (Ag) and silver based alloys are front runners among other metals and alloys being investigated. Ag has a low electrical resistivity (1.59 micro-ohm-centimeters for bulk), very high thermal conductivity (4.25 Watt per centimeters per Kelvin), and has better electromigration resistance than aluminum (Al). In the pure form, however, it has several drawbacks (e.g., a tendency to diffuse in silicon substrate at higher temperatures, inadequate adhesion to silicon dioxide, poor corrosion resistance, and agglomeration at higher temperatures). These drawbacks can be circumvented by the addition of diffusion barrier layers and/or alloying in silver. The present study investigates both routes to make silver a legitimate interconnect material. Initially this study focuses on thermal stability and behavior of tungsten-titanium (W-Ti) barrier layers for Ag metallization. It is shown that Ag thin films are thermally stable up to 650 degrees centigrade with the presence of W-Ti under layers. The effect of a W-Ti layer on the {111} texture formation in Ag thin film is also evaluated in detail. Insertion of a thin W-Ti over layer on Ag thin films is investigated with respect to their thermal stability. This research also evaluates the diffusion of Ag into silicon dioxide and W-Ti barriers. This project shows that W-Ti is an effective barrier layer for silver metallization. Later, the study investigates the effect of Cu addition in silver metallization and its impact on electromigration resistance. It is shown that Cu addition enhances the electromigration lifetime for silver metallization.

  4. Electroless deposition of NiCrB diffusion barrier layer film for ULSI-Cu metallization

    Science.gov (United States)

    Wang, Yuechun; Chen, Xiuhua; Ma, Wenhui; Shang, Yudong; Lei, Zhengtao; Xiang, Fuwei

    2017-02-01

    NiCrB films were deposited on Si substrates using electroless deposition as a diffusion barrier layer for Cu interconnections. Samples of the prepared NiCrB/SiO2/Si and NiCrB/Cu/NiCrB/SiO2/Si were annealed at temperatures ranging from 500 °C to 900 °C. The reaction mechanism of the electroless deposition of the NiCrB film, the failure temperature and the failure mechanism of the NiCrB diffusion barrier layer were investigated. The prepared samples were subjected to XRD, XPS, FPP and AFM to determine the phases, composition, sheet resistance and surface morphology of samples before and after annealing. The results of these analyses indicated that the failure temperature of the NiCrB barrier film was 900 °C and the failure mechanism led to crystallization and grain growth of the NiCrB barrier layer after high temperature annealing. It was found that this process caused Cu grains to reach Si substrate through the grain boundaries, and then the reaction between Cu and Si resulted in the formation of highly resistive Cu3Si.

  5. Effect of layered silicate on the barrier properties of cured butyl rubber

    Energy Technology Data Exchange (ETDEWEB)

    Krzeminska, S [Central Institute for Labour Protection - National Research Institute, Department of Personal Equipment, Wierzbowa 48, 90-133 Lodz (Poland); Rzymski, W M [Technical University of Lodz, Institute of Polymer and Dye Technology, Stefanowskiego 12/16, 90-924 Lodz (Poland)], E-mail: sykrz@ciop.lodz.pl

    2009-01-01

    The aim of the study was to investigate the effect of layered silicate nanofiller (bentonite: Nanofil 15, Poro Additive) on the barrier properties of non-polar butyl rubber (the IIR, BK 1675 N brand) conventionally cured with sulphur in respect of selected organic solvents. The barrier properties were assessed on the basis of determination of standarized breakthrough time for cured IIR exposed to the selected solvents with different thermodynamic affinities to IIR, i.e. polar butyl acetate and non-polar cyclohexane. In the case of the non-polar solvent - cyclohexane - no effect of the content of the layered silicate (5 - 20 phr) on improvement of barrier properties of the tested IIR vulcanizates was observed. In contrast, a favorable effect of the silicate nanofiller was observed in the case of the polar solvent - butyl acetate, for which the breakthrough time tested for filler-containing vulcanizate (10 - 20 phr) reached 160 -200 min, whereas the breakthrough time obtained for unfilled vulcanizate was 129 min only. The testing of barrier properties of IIR vulcanizates containing various fillers (layered silicate Nanofil 15 and active silica Ultrasil VN3) added in the amount of 20 phr, indicate the favorable effect of layered silicate only in tests with the polar solvent used (an increase in breaktrhough time from 129 to 164 min). Contrary, the presence of conventional silica leads to decrease of breakthrough time (to 118 min). In the case of the non-polar solvent, no effect of the filler type on barrier properties of the tested vulcanizates was observed.

  6. Determination of the Schottky barrier height of ferromagnetic contacts to few-layer phosphorene

    Energy Technology Data Exchange (ETDEWEB)

    Anugrah, Yoska; Robbins, Matthew C.; Koester, Steven J. [Department of Electrical and Computer Engineering, University of Minnesota-Twin Cities, Minneapolis, Minnesota 55455 (United States); Crowell, Paul A. [School of Physics and Astronomy, University of Minnesota-Twin Cities, Minneapolis, Minnesota 55455 (United States)

    2015-03-09

    Phosphorene, the 2D analogue of black phosphorus, is a promising material for studying spin transport due to its low spin-orbit coupling and its ½ nuclear spin, which could allow the study of hyperfine effects. In this work, the properties of permalloy (Py) and cobalt (Co) contacts to few-layer phosphorene are presented. The Schottky barrier height was extracted and determined as a function of gate bias. Flat-band barrier heights, relative to the valence band edge, of 110 meV and 200 meV were determined for Py and Co, respectively. These results are important for future studies of spin transport in phosphorene.

  7. Ceramic barrier layers for flexible thin film solar cells on metallic substrates: a laboratory scale study for process optimization and barrier layer properties.

    Science.gov (United States)

    Delgado-Sanchez, Jose-Maria; Guilera, Nuria; Francesch, Laia; Alba, Maria D; Lopez, Laura; Sanchez, Emilio

    2014-11-12

    Flexible thin film solar cells are an alternative to both utility-scale and building integrated photovoltaic installations. The fabrication of these devices over electrically conducting low-cost foils requires the deposition of dielectric barrier layers to flatten the substrate surface, provide electrical isolation between the substrate and the device, and avoid the diffusion of metal impurities during the relatively high temperatures required to deposit the rest of the solar cell device layers. The typical roughness of low-cost stainless-steel foils is in the hundred-nanometer range, which is comparable or larger than the thin film layers comprising the device and this may result in electrical shunts that decrease solar cell performance. This manuscript assesses the properties of different single-layer and bilayer structures containing ceramics inks formulations based on Al2O3, AlN, or Si3N4 nanoparticles and deposited over stainless-steel foils using a rotogravure printing process. The best control of the substrate roughness was achieved for bilayers of Al2O3 or AlN with mixed particle size, which reduced the roughness and prevented the diffusion of metals impurities but AlN bilayers exhibited as well the best electrical insulation properties.

  8. Thermal shock behavior of toughened gadolinium zirconate/YSZ double-ceramic-layered thermal barrier coating

    Energy Technology Data Exchange (ETDEWEB)

    Zhong, Xinghua, E-mail: xhzhong@mail.sic.ac.cn; Zhao, Huayu; Zhou, Xiaming; Liu, Chenguang; Wang, Liang; Shao, Fang; Yang, Kai; Tao, Shunyan; Ding, Chuanxian

    2014-04-01

    Highlights: • Gd{sub 2}Zr{sub 2}O{sub 7}/YSZ DCL thermal barrier coating was designed and fabricated. • The Gd{sub 2}Zr{sub 2}O{sub 7} top ceramic layer was toughened by addition of nanostructured 3YSZ. • Remarkable improvement in thermal shock resistance of the DCL coating was achieved. - Abstract: Double-ceramic-layered (DCL) thermal barrier coating system comprising of toughened Gadolinium zirconate (Gd{sub 2}Zr{sub 2}O{sub 7}, GZ) as the top ceramic layer and 4.5 mol% Y{sub 2}O{sub 3} partially-stabilized ZrO{sub 2} (4.5YSZ) as the bottom ceramic layer was fabricated by plasma spraying and thermal shock behavior of the DCL coating was investigated. The GZ top ceramic layer was toughened by addition of nanostructured 3 mol% Y{sub 2}O{sub 3} partially-stabilized ZrO{sub 2} (3YSZ) to improve fracture toughness of the matrix. The thermal shock resistance of the DCL coating was enhanced significantly compared to that of single-ceramic-layered (SCL) GZ-3YSZ composite coating, which is believed to be primarily attributed to the two factors: (i) the increase in fracture toughness of the top ceramic layer by incorporating nanostructured YSZ particles and (ii) the improvement in strain tolerance through the utilization of 4.5YSZ as the bottom ceramic layer. In addition, the failure mechanisms are mainly attributed to the still low fracture toughness of the top ceramic layer and oxidation of the bond-coat.

  9. Alumina Paste Layer as a Sublimation Suppression Barrier for Yb14MnSb11

    Science.gov (United States)

    Paik, Jong-Ah; Caillat, Thierry

    2010-01-01

    Sublimation is a major cause of degradation of thermoelectric power generation systems. Most thermoelectric materials tend to have peak values at the temperature where sublimation occurs. A sublimation barrier is needed that is stable at operating temperatures, inert against thermoelectric materials, and able to withstand thermal cycling stress. A porous alumina paste layer is suitable as a sublimation barrier for Yb14MnSb11. It can accommodate stress generated by the thermal expansion discrepancy between the suppression layer and thermoelectric materials. Sublimation suppression is achieved by filling pores naturally with YbO2, a natural byproduct of sublimation. YbO2 generated during the sublimation of Yb14MnSb11 fills the porous structure of the alumina paste, causing sublimation to decrease with time as the pores become filled.

  10. Mechanisms governing the interfacial delamination of thermal barrier coating system with double ceramic layers

    Science.gov (United States)

    Xu, Rong; Fan, Xueling; Wang, T. J.

    2016-05-01

    A systematic study of factors affecting the interfacial delamination of thermal barrier coating system (TBCs) with double ceramic layers (DCL) is presented. Crack driving forces for delaminations at two weak interfaces are examined. The results show that a thicker outermost ceramic layer can induce dramatic increase in crack driving force and make the interface between two ceramic coatings become more prone to delamination. The behavior is shown to be more prominent in TBCs with stiffer outmost coating. The thickness ratio of two ceramic layers is an important parameter for controlling the failure mechanisms and determining the lifetime of DCL TBCs under inservice condition. By accounting for the influences of thickness ratio of two ceramic layers and interfacial fracture toughnesses of two involved interfaces, the fracture mechanism map of DCL TBCs has been constructed, in which different failure mechanisms are identified. The results quanlitatively agree with the aviliable experimental data.

  11. The effect of asymmetric barrier layers in the waveguide region on power characteristics of QW lasers

    DEFF Research Database (Denmark)

    Zubov, F. I.; Zhukov, A. E.; Shernyakov, Yu M.;

    2015-01-01

    Current-voltage and light-current characteristics of quantum-well lasers have been studied at high drive currents. The introduction of asymmetric barrier layers adjacent to the active region caused a significant suppression of the nonlinearity in the light-current characteristic and an increase...... in the external differential efficiency. As a result, the maximum wallplug efficiency increased by 9%, while the output optical power increased by 29%....

  12. Observations of capillary barriers and preferential flow in layered snow during cold laboratory experiments

    Science.gov (United States)

    Avanzi, Francesco; Hirashima, Hiroyuki; Yamaguchi, Satoru; Katsushima, Takafumi; De Michele, Carlo

    2016-09-01

    Data of liquid water flow around a capillary barrier in snow are still limited. To gain insight into this process, we carried out observations of dyed water infiltration in layered snow at 0 °C during cold laboratory experiments. We considered three different finer-over-coarser textures and three different water input rates. By means of visual inspection, horizontal sectioning, and measurements of liquid water content (LWC), capillary barriers and associated preferential flow were characterized. The flow dynamics of each sample were also simulated solving the Richards equation within the 1-D multi-layer physically based snow cover model SNOWPACK. Results revealed that capillary barriers and preferential flow are relevant processes ruling the speed of water infiltration in stratified snow. Both are marked by a high degree of spatial variability at centimeter scale and complex 3-D patterns. During unsteady percolation of water, observed peaks in bulk volumetric LWC at the interface reached ˜ 33-36 vol % when the upper layer was composed by fine snow (grain size smaller than 0.5 mm). However, LWC might locally be greater due to the observed heterogeneity in the process. Spatial variability in water transmission increases with grain size, whereas we did not observe a systematic dependency on water input rate for samples containing fine snow. The comparison between observed and simulated LWC profiles revealed that the implementation of the Richards equation reproduces the existence of a capillary barrier for all observed cases and yields a good agreement with observed peaks in LWC at the interface between layers.

  13. Suitability of polystyrene as a functional barrier layer in coloured food contact materials.

    Science.gov (United States)

    Genualdi, Susan; Addo Ntim, Susana; Begley, Timothy

    2015-01-01

    Functional barriers in food contact materials (FCMs) are used to prevent or reduce migration from inner layers in multilayer structures to food. The effectiveness of functional barrier layers was investigated in coloured polystyrene (PS) bowls due to their intended condition of use with hot liquids such as soups or stew. Migration experiments were performed over a 10-day period using USFDA-recommended food simulants (10% ethanol, 50% ethanol, corn oil and Miglyol) along with several other food oils. At the end of the 10 days, solvent dyes had migrated from the PS bowls at 12, 1 and 31,000 ng cm(-)(2) into coconut oil, palm kernel oil and Miglyol respectively, and in coconut oil and Miglyol the colour change was visible to the human eye. Scanning electron microscope (SEM) images revealed that the functional barrier was no longer intact for the bowls exposed to coconut oil, palm kernel oil, Miglyol, 10% ethanol, 50% ethanol and goat's milk. Additional tests showed that 1-dodecanol, a lauryl alcohol derived from palm kernel oil and coconut oil, was present in the PS bowls at an average concentration of 11 mg kg(-1). This compound is likely to have been used as a dispersing agent for the solvent dye and aided the migration of the solvent dye from the PS bowl into the food simulant. The solvent dye was not found in the 10% ethanol, 50% ethanol and goat's milk food simulants above their respective limits of detection, which is likely to be due to its insolubility in aqueous solutions. A disrupted barrier layer is of concern because if there are unregulated materials in the inner layers of the laminate, they may migrate to food, and therefore be considered unapproved food additives resulting in the food being deemed adulterated under the Federal Food Drug and Cosmetic Act.

  14. Diurnal evolution of the barrier layer and its local feedback in the central Taiwan Strait

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Diurnal evolution of the barrier layer (BL) and its local feedback features in the central Taiwan Strait (119.2oE,24.3oN) during summertime monsoon are investigated using in situ moored observations conducted by the "Yan-Ping 2" research vessel in late June 2005.During the initiation phase,for the non-solar radiation tends to be trapped in the upper mixed layer,whereas the solar radiation can penetrate deeply through the mixed layer approaching the thermocline,most heat is accumulated inside the BL inducing an inverse-thermal layer.Along with heat convergence inside the BL,thermal exchange increases between the BL and the overlaying mixed layer and finally,a prominently warming mixed layer is formed.Moreover,the BL is associated with a buoyancy frequency minimum with mild stability.Further analysis reveals that the BL’s local feedbacks can be divided into two aspects,on one hand,the BL can generate dramatic changes in the local sensible and latent heat fluxes;on the other hand,the sub-halocline and the thermocline serve as two interfaces during the downward transmission of the wind stirring turbulent kinetic energy (TKE) and as a result,most TKE is retarded by the shallow halocline and being trapped above the upper mixed layer,while the residual pierced through the base of the mixed layer is likewise blocked by the thermocline.

  15. Thermoelastic Characteristics in Thermal Barrier Coatings with a Graded Layer between the Top and Bond Coats

    Directory of Open Access Journals (Sweden)

    Seokchan Kim

    2013-01-01

    Full Text Available A graded layer was introduced at the interface between the top and bond coats to reduce the risk of failure in a thermal barrier coating (TBC system, and the thermoelastic behavior was investigated through mathematical approaches. Two types of TBC model with and without the graded layer, subject to a symmetric temperature distribution in the longitudinal direction, were taken into consideration to evaluate thermoelastic behaviors such as temperature distribution, displacement, and thermal stress. Thermoelastic theory was applied to derive two governing partial differential equations, and a finite volume method was developed to obtain approximations because of the complexity. The TBC with the graded layer shows improved durability in thermoelastic characteristics through mathematical approaches, in agreement with the experimental results. The results will be useful in discovering technologies for enhancing the thermomechanical properties of TBCs.

  16. Barrier enhancement of Ge MSM IR photodetector with Ge layer optimization

    Science.gov (United States)

    Asar, Tarık; Özçelik, Süleyman

    2015-12-01

    Germanium thin films were deposited on n-type Silicon substrates with three different sputter power by using DC magnetron sputtering system at room temperature. The structural and morphological properties of the samples have been obtained by means of X-ray diffraction and atomic force microscopy measurements. Then, Germanium metal-semiconductor-metal infrared photodetectors were fabricated on these structures. The carrier recombination lifetime and the diffusion length of the devices were also calculated by using the carrier density and mobility data was obtained from the room temperature Hall Effect measurements. The dark current-voltage measurements of devices were achieved at room temperature. The electrical parameters such as ideality factor, Schottky barrier height, saturation current and series resistance were extracted from dark current-voltage characteristics. Finally, it has been shown that the barrier enhancement of Ge MSM IR photodetector can be achieved by Ge layer optimization.

  17. Intermediate type excitons in Schottky barriers of A3B6 layer semiconductors and UV photodetectors

    Science.gov (United States)

    Alekperov, O. Z.; Guseinov, N. M.; Nadjafov, A. I.

    2006-09-01

    Photoelectric and photovoltaic spectra of Schottky barrier (SB) structures of InSe, GaSe and GaS layered semiconductors (LS) are investigated at quantum energies from the band edge excitons of corresponding materials up to 6.5eV. Spectral dependences of photoconductivity (PC) of photo resistors and barrier structures are strongly different at the quantum energies corresponding to the intermediate type excitons (ITE) observed in these semiconductors. It was suggested that high UV photoconductivity of A3B6 LS is due to existence of high mobility light carriers in the depth of the band structure. It is shown that SB of semitransparent Au-InSe is high sensitive photo detector in UV region of spectra.

  18. Effect of a multi-layer infection control barrier on the micro-hardness of a composite resin

    OpenAIRE

    In-Nam Hwang; Sung-Ok Hong; Bin-Na Lee; Yun-Chan Hwang; Won-Mann Oh; Hoon-Sang Chang

    2012-01-01

    OBJECTIVE: The aim of this study was to evaluate the effect of multiple layers of an infection control barrier on the micro-hardness of a composite resin. MATERIAL AND METHODS: One, two, four, and eight layers of an infection control barrier were used to cover the light guides of a high-power light emitting diode (LeD) light curing unit (LCU) and a low-power halogen LCU. The composite specimens were photopolymerized with the LCUs and the barriers, and the micro-hardness of the upper and lower...

  19. Fabrication of metallic single electron transistors featuring plasma enhanced atomic layer deposition of tunnel barriers

    Science.gov (United States)

    Karbasian, Golnaz

    The continuing increase of the device density in integrated circuits (ICs) gives rise to the high level of power that is dissipated per unit area and consequently a high temperature in the circuits. Since temperature affects the performance and reliability of the circuits, minimization of the energy consumption in logic devices is now the center of attention. According to the International Technology Roadmaps for Semiconductors (ITRS), single electron transistors (SETs) hold the promise of achieving the lowest power of any known logic device, as low as 1x10-18 J per switching event. Moreover, SETs are the most sensitive electrometers to date, and are capable of detecting a fraction of an electron charge. Despite their low power consumption and high sensitivity for charge detection, room temperature operation of these devices is quite challenging mainly due to lithographical constraints in fabricating structures with the required dimensions of less than 10 nm. Silicon based SETs have been reported to operate at room temperature. However, they all suffer from significant variation in batch-to-batch performance, low fabrication yield, and temperature-dependent tunnel barrier height. In this project, we explored the fabrication of SETs featuring metal-insulator-metal (MIM) tunnel junctions. While Si-based SETs suffer from undesirable effect of dopants that result in irregularities in the device behavior, in metal-based SETs the device components (tunnel barrier, island, and the leads) are well-defined. Therefore, metal SETs are potentially more predictable in behavior, making them easier to incorporate into circuits, and easier to check against theoretical models. Here, the proposed fabrication method takes advantage of unique properties of chemical mechanical polishing (CMP) and plasma enhanced atomic layer deposition (PEALD). Chemical mechanical polishing provides a path for tuning the dimensions of the tunnel junctions, surpassing the limits imposed by electron beam

  20. A three-terminal ultraviolet photodetector constructed on a barrier-modulated triple-layer architecture.

    Science.gov (United States)

    Ye, Daqian; Mei, Zengxia; Liang, Huili; Liu, Lishu; Zhang, Yonghui; Li, Junqiang; Liu, Yaoping; Gu, Changzhi; Du, Xiaolong

    2016-05-16

    We report a novel three-terminal device fabricated on MgZnO/ZnO/MgZnO triple-layer architecture. Because of the combined barrier modulation effect by both gate and drain biases, the device shows an unconventional I-V characteristics compared to a common field effect transistor. The photoresponse behavior of this unique device was also investigated and applied in constructing a new type ultraviolet (UV) photodetector, which may be potentially used as an active element in a UV imaging array. More significantly, the proper gate bias-control offers a new pathway to overcome the common persistent photoconductivity (PPC) effect problem. Additionally, the MgZnO:F as a channel layer was chosen to optimize the photoresponse properties, and the spectrum indicated a gate bias-dependent wavelength-selectable feature for different response peaks, which suggests the possibility to build a unique dual-band UV photodetector with this new architecture.

  1. Gas permeation barriers deposited by atmospheric pressure plasma enhanced atomic layer deposition

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, Lukas, E-mail: lhoffmann@uni-wuppertal.de; Theirich, Detlef; Hasselmann, Tim; Räupke, André; Schlamm, Daniel; Riedl, Thomas, E-mail: t.riedl@uni-wuppertal.de [Institute of Electronic Devices, University of Wuppertal, Rainer-Gruenter-Str. 21, 42119 Wuppertal (Germany)

    2016-01-15

    This paper reports on aluminum oxide (Al{sub 2}O{sub 3}) thin film gas permeation barriers fabricated by atmospheric pressure atomic layer deposition (APPALD) using trimethylaluminum and an Ar/O{sub 2} plasma at moderate temperatures of 80 °C in a flow reactor. The authors demonstrate the ALD growth characteristics of Al{sub 2}O{sub 3} films on silicon and indium tin oxide coated polyethylene terephthalate. The properties of the APPALD-grown layers (refractive index, density, etc.) are compared to that deposited by conventional thermal ALD at low pressures. The films films deposited at atmospheric pressure show water vapor transmission rates as low as 5 × 10{sup −5} gm{sup −2}d{sup −1}.

  2. Glomerular endothelial surface layer acts as a barrier against albumin filtration.

    Science.gov (United States)

    Dane, Martijn J C; van den Berg, Bernard M; Avramut, M Cristina; Faas, Frank G A; van der Vlag, Johan; Rops, Angelique L W M M; Ravelli, Raimond B G; Koster, Bram J; van Zonneveld, Anton Jan; Vink, Hans; Rabelink, Ton J

    2013-05-01

    Glomerular endothelium is highly fenestrated, and its contribution to glomerular barrier function is the subject of debate. In recent years, a polysaccharide-rich endothelial surface layer (ESL) has been postulated to act as a filtration barrier for large molecules, such as albumin. To test this hypothesis, we disturbed the ESL in C57Bl/6 mice using long-term hyaluronidase infusion for 4 weeks and monitored albumin passage using immunolabeling and correlative light-electron microscopy that allows for complete and integral assessment of glomerular albumin passage. ESL ultrastructure was visualized by transmission electron microscopy using cupromeronic blue and by localization of ESL binding lectins using confocal microscopy. We demonstrate that glomerular fenestrae are filled with dense negatively charged polysaccharide structures that are largely removed in the presence of circulating hyaluronidase, leaving the polysaccharide surfaces of other glomerular cells intact. Both retention of native ferritin [corrected] in the glomerular basement membrane and systemic blood pressure were unaltered. Enzyme treatment, however, induced albumin passage across the endothelium in 90% of glomeruli, whereas this could not be observed in controls. Yet, there was no net albuminuria due to binding and uptake of filtered albumin by the podocytes and parietal epithelium. ESL structure and function completely recovered within 4 weeks on cessation of hyaluronidase infusion. Thus, the polyanionic ESL component, hyaluronan, is a key component of the glomerular endothelial protein permeability barrier.

  3. Thermal stability of atomic layer deposited Ru layer on Si and TaN/Si for barrier application of Cu interconnection.

    Science.gov (United States)

    Shin, Dong Chan; Kim, Moo Ryul; Lee, Jong Ho; Choi, Bum Ho; Lee, Hong Kee

    2012-07-01

    The thermal stability of thin Ru single layer and Ru/TaN bilayers grown on bare Si by plasma enhanced atomic layer deposition (PEALD) have been studied with Cu/Ru, Cu/Ru/TaN structures as a function of annealing temperature. To investigate the characteristics as a copper diffusion barrier, a 50 nm thick Cu film was sputtered on Ru and Ru/TaN layers and each samples subjected to thermal annealing under N2 ambient with varied temperature 300, 400, and 500 degrees C, respectively. It was found that the single 5 nm thick ALD Ru layer acted as an effective Cu diffusion barrier up to 400 degrees C. On the other hand ALD Ru (5 nm)/TaN (3.2 nm) showed the improved diffusion barrier characteristics even though the annealing temperature increased up to 500 degrees C. Based on the experimental results, the failure mechanism of diffusion barrier would be related to the crystallization of amorphous Ru thin film as temperature raised which implies the crystallized Ru grain boundary served as the diffusion path of Cu atoms. The combination of ALD Ru incorporated with TaN layer would be a promising barrier structure in Cu metallization.

  4. Pore former induced porosity in LSM/CGO cathodes for electrochemical cells for flue gas purification

    DEFF Research Database (Denmark)

    Skovgaard, M.; Andersen, Kjeld Bøhm; Kammer Hansen, Kent

    2012-01-01

    In this study the effect of the characteristics of polymethyl methacrylate (PMMA) pore formers on the porosity, pore size distribution and the air flow through the prepared lanthanum strontium manganate/gadolinium-doped cerium oxide (LSM/CGO) cathodes was investigated. Porous cathodes were obtained...... and the highest porosity measured was 46.4% with an average pore diameter of 0.98 μm. The air flow through this cathode was measured to 5.8 ml/(min mm2). Also the effect of exposure time to the solvent was tested for the most promising PMMA pore former and it was found that the average pore diameter decreases...

  5. Effectiveness of compacted soil liner as a gas barrier layer in the landfill final cover system.

    Science.gov (United States)

    Moon, Seheum; Nam, Kyoungphile; Kim, Jae Young; Hwan, Shim Kyu; Chung, Moonkyung

    2008-01-01

    A compacted soil liner (CSL) has been widely used as a single barrier layer or a part of composite barrier layer in the landfill final cover system to prevent water infiltration into solid wastes for its acceptable hydraulic permeability. This study was conducted to test whether the CSL was also effective in prohibiting landfill gas emissions. For this purpose, three different compaction methods (i.e., reduced, standard, and modified Proctor methods) were used to prepare the soil specimens, with nitrogen as gas, and with water and heptane as liquid permeants. Measured gas permeability ranged from 2.03 x 10(-10) to 4.96 x 10(-9) cm(2), which was a magnitude of two or three orders greater than hydraulic permeability (9.60 x 10(-13) to 1.05 x 10(-11) cm(2)). The difference between gas and hydraulic permeabilities can be explained by gas slippage, which makes gas more permeable, and by soil-water interaction, which impedes water flow and then makes water less permeable. This explanation was also supported by the result that a liquid permeability measured with heptane as a non-polar liquid was similar to the intrinsic gas permeability. The data demonstrate that hydraulic requirement for the CSL is not enough to control the gas emissions from a landfill.

  6. Ultrathin, transferred layers of thermally grown silicon dioxide as biofluid barriers for biointegrated flexible electronic systems

    Science.gov (United States)

    Fang, Hui; Zhao, Jianing; Yu, Ki Jun; Song, Enming; Barati Farimani, Amir; Chiang, Chia-Han; Jin, Xin; Xue, Yeguang; Xu, Dong; Du, Wenbo; Seo, Kyung Jin; Zhong, Yiding; Yang, Zijian; Won, Sang Min; Fang, Guanhua; Choi, Seo Woo; Chaudhuri, Santanu; Huang, Yonggang; Ashraful Alam, Muhammad; Viventi, Jonathan; Aluru, N. R.; Rogers, John A.

    2016-10-01

    Materials that can serve as long-lived barriers to biofluids are essential to the development of any type of chronic electronic implant. Devices such as cardiac pacemakers and cochlear implants use bulk metal or ceramic packages as hermetic enclosures for the electronics. Emerging classes of flexible, biointegrated electronic systems demand similar levels of isolation from biofluids but with thin, compliant films that can simultaneously serve as biointerfaces for sensing and/or actuation while in contact with the soft, curved, and moving surfaces of target organs. This paper introduces a solution to this materials challenge that combines (i) ultrathin, pristine layers of silicon dioxide (SiO2) thermally grown on device-grade silicon wafers, and (ii) processing schemes that allow integration of these materials onto flexible electronic platforms. Accelerated lifetime tests suggest robust barrier characteristics on timescales that approach 70 y, in layers that are sufficiently thin (less than 1 μm) to avoid significant compromises in mechanical flexibility or in electrical interface fidelity. Detailed studies of temperature- and thickness-dependent electrical and physical properties reveal the key characteristics. Molecular simulations highlight essential aspects of the chemistry that governs interactions between the SiO2 and surrounding water. Examples of use with passive and active components in high-performance flexible electronic devices suggest broad utility in advanced chronic implants.

  7. Barrier properties of hydrogenated acrylonitrile-butadiene rubber composites containing modified layered aluminosilicates

    Science.gov (United States)

    Krzemińska, S.; Rzymski, W. M.

    2011-12-01

    The resistance to permeation by the selected solvents of flat membranes made of cured hydrogenated acrylonitrile-butadiene rubber (HNBR) materials without any fillers and containing 5 phr of layered aluminosilicate nanofiller (bentonite), modified with various types of ammonium salts or N330 type carbon black, was investigated. The barrier properties were assessed on the basis of the breakthrough time of a liquid with low (cyclohexane) or average (butyl acetate) thermodynamic affinity to HNBR, determined according to EN 6529:2001, through a cured elastomer sample. The addition of bentonite, irrespectively of the method of modification of its particles, was found to increase the cured HNBR breakthrough time by 20 - 35 % in the case of slowly permeating non-polar cyclohexane, and by 50 - 130 % in the case of polar butyl acetate permeating more rapidly, in comparison with the barrier material containing no filler. The layered aluminosilicate nanofillers increased the breakthrough time of the material sample for both the tested solvents. In particular, the breakthrough time for polar butyl acetate was even longer than for conventional carbon black. Additionally, the increase of the breakthrough time was observed to depend on the modifier of bentonite particle surface.

  8. Influence of Ni Catalyst Layer and TiN Diffusion Barrier on Carbon Nanotube Growth Rate

    Directory of Open Access Journals (Sweden)

    Mérel Philippe

    2010-01-01

    Full Text Available Abstract Dense, vertically aligned multiwall carbon nanotubes were synthesized on TiN electrode layers for infrared sensing applications. Microwave plasma-enhanced chemical vapor deposition and Ni catalyst were used for the nanotubes synthesis. The resultant nanotubes were characterized by SEM, AFM, and TEM. Since the length of the nanotubes influences sensor characteristics, we study in details the effects of changing Ni and TiN thickness on the physical properties of the nanotubes. In this paper, we report the observation of a threshold Ni thickness of about 4 nm, when the average CNT growth rate switches from an increasing to a decreasing function of increasing Ni thickness, for a process temperature of 700°C. This behavior is likely related to a transition in the growth mode from a predominantly “base growth” to that of a “tip growth.” For Ni layer greater than 9 nm the growth rate, as well as the CNT diameter, variations become insignificant. We have also observed that a TiN barrier layer appears to favor the growth of thinner CNTs compared to a SiO2 layer.

  9. Atomic and electronic structure of ultrathin fluoride barrier layers at the oxide/Si interface

    Energy Technology Data Exchange (ETDEWEB)

    Pasquali, L; Montecchi, M; Nannarone, S [Department of Materials and Environmental Engineering, University of Modena and Reggio Emilia, Via Vignolese 905, I-41125 Modena (Italy); Boscherini, F [Department of Physics, University of Bologna, Viale Berti Pichat 6/2, I-40127 Bologna (Italy)

    2011-09-07

    A SrF{sub 2} ultrathin barrier layer on Si(001) is used to form a sharp interface and block reactivity and intermixing between the semiconductor and a Yb{sub 2}O{sub 3} overlayer. Yb{sub 2}O{sub 3}/Si(001) and Yb{sub 2}O{sub 3}/SrF{sub 2}/Si(001) interfaces grown in ultra high vacuum by molecular beam epitaxy are studied by photoemission and x-ray absorption fine structure. Without the fluoride interlayer, Yb{sub 2}O{sub 3}/Si(001) presents an interface reacted region formed by SiO{sub x} and/or silicate compounds, which is about 9 A thick and increases up to 14-15 A after annealing at 500-700 {sup 0}C. A uniform single layer of SrF{sub 2} molecules blocks intermixing and reduces the oxidized Si region to 2.4 A after deposition and to 3.5 A after annealing at 500 {sup 0}C. In both cases we estimate a conduction band offset and a valence band offset of {approx} 1.7 eV and 2.4 eV between the oxide and Si, respectively. X-ray absorption fine structure measurements at the Yb L{sub III} edge suggest that the Yb oxide films exhibit a significant degree of static disorder with and without the fluoride barrier. Sr K edge measurements indicate that the ultrathin fluoride films are reacted, with the formation of bonds between Si and Sr; the Sr-Sr and Sr-F interatomic distances in the ultrathin fluoride barrier film are relaxed to the bulk value.

  10. Efficiency enhancement of solid-state PbS quantum dot-sensitized solar cells with Al2O3 barrier layer

    KAUST Repository

    Brennan, Thomas P.

    2013-01-01

    Atomic layer deposition (ALD) was used to grow both PbS quantum dots and Al2O3 barrier layers in a solid-state quantum dot-sensitized solar cell (QDSSC). Barrier layers grown prior to quantum dots resulted in a near-doubling of device efficiency (0.30% to 0.57%) whereas barrier layers grown after quantum dots did not improve efficiency, indicating the importance of quantum dots in recombination processes. © 2013 The Royal Society of Chemistry.

  11. Effect of a multi-layer infection control barrier on the micro-hardness of a composite resin

    Directory of Open Access Journals (Sweden)

    In-Nam Hwang

    2012-10-01

    Full Text Available OBJECTIVE: The aim of this study was to evaluate the effect of multiple layers of an infection control barrier on the micro-hardness of a composite resin. MATERIAL AND METHODS: One, two, four, and eight layers of an infection control barrier were used to cover the light guides of a high-power light emitting diode (LeD light curing unit (LCU and a low-power halogen LCU. The composite specimens were photopolymerized with the LCUs and the barriers, and the micro-hardness of the upper and lower surfaces was measured (n=10. The hardness ratio was calculated by dividing the bottom surface hardness of the experimental groups by the irradiated surface hardness of the control groups. The data was analyzed by two-way ANOVA and Tukey's HSD test. RESULTS: The micro-hardness of the composite specimens photopolymerized with the LED LCU decreased significantly in the four- and eight-layer groups of the upper surface and in the two-, four-, and eight-layer groups of the lower surface. The hardness ratio of the composite specimens was <80% in the eight-layer group. The micro-hardness of the composite specimens photopolymerized with the halogen LCU decreased significantly in the eight-layer group of the upper surface and in the two-, four-, and eight-layer groups of the lower surface. However, the hardness ratios of all the composite specimens photopolymerized with barriers were <80%. CONCLUSIONS: The two-layer infection control barrier could be used on high-power LCUs without decreasing the surface hardness of the composite resin. However, when using an infection control barrier on the low-power LCUs, attention should be paid so as not to sacrifice the polymerization efficiency.

  12. Autothermal reforming of dimethyl ether with CGO-based precious metal catalysts

    Science.gov (United States)

    Choi, Seunghyeon; Bae, Joongmyeon

    2016-03-01

    In this paper, we investigated the DME ATR reaction with different types of precious metal (Pt, Rh, Ru)-supported CGO catalysts. We also evaluated the reaction characteristics of DME ATR reaction by modifying certain reforming conditions, including the temperature, the amount of air and water, and the flow rate. The Ru-added CGO catalyst showed the best performance in DME ATR. The operating condition that produced the greatest effect on conversion efficiency was temperature; however the amounts of steam and air were also important with regard to conversion efficiency and the reaction heat. In case higher GHSV conditions the methane yields are increased. To maximize conversion efficiency with thermal neutral operating conditions, we suggest an SCR of 1.5, OCR of 0.45, over temperature of 700 °C, and a GHSV of less than 20,000/h. Under harsh conditions, such as low temperature and high GHSV, the methane yield increases. Therefore, the high temperature DME ATR reaction seems to consist of two main steps: the DME decomposition to methane and the methane autothermal reforming reaction.

  13. Stabilisation of composite LSFCO-CGO based anodes for methane oxidation in solid oxide fuel cells

    Science.gov (United States)

    Sin, A.; Kopnin, E.; Dubitsky, Y.; Zaopo, A.; Aricò, A. S.; Gullo, L. R.; Rosa, D. La; Antonucci, V.

    A La 0.6Sr 0.4Fe 0.8Co 0.2O 3-Ce 0.8Gd 0.2O 1.9 (LSFCO-CGO) composite anode material was investigated for the direct electrochemical oxidation of methane in intermediate temperature solid oxide fuel cells (IT-SOFCs). A maximum power density of 0.17 W cm -2 at 800 °C was obtained with a methane-fed ceria electrolyte-supported SOFC. A progressive increase of performance was recorded during 140 h operation with dry methane. The anode did not show any structure degradation after the electrochemical testing. Furthermore, no formation of carbon deposits was detected by electron microscopy and elemental analysis. Alternatively, this perovskite material showed significant chemical and structural modifications after high temperature treatment in a dry methane stream in a packed-bed reactor. It is derived that the continuous supply of mobile oxygen anions from the electrolyte to the LSFCO anode, promoted by the mixed conductivity of CGO electrolyte at 800 °C, stabilises the perovskite structure near the surface under SOFC operation and open circuit conditions.

  14. Effect of Al 2 O 3 Recombination Barrier Layers Deposited by Atomic Layer Deposition in Solid-State CdS Quantum Dot-Sensitized Solar Cells

    KAUST Repository

    Roelofs, Katherine E.

    2013-03-21

    Despite the promise of quantum dots (QDs) as a light-absorbing material to replace the dye in dye-sensitized solar cells, quantum dot-sensitized solar cell (QDSSC) efficiencies remain low, due in part to high rates of recombination. In this article, we demonstrate that ultrathin recombination barrier layers of Al2O3 deposited by atomic layer deposition can improve the performance of cadmium sulfide (CdS) quantum dot-sensitized solar cells with spiro-OMeTAD as the solid-state hole transport material. We explored depositing the Al2O3 barrier layers either before or after the QDs, resulting in TiO2/Al2O3/QD and TiO 2/QD/Al2O3 configurations. The effects of barrier layer configuration and thickness were tracked through current-voltage measurements of device performance and transient photovoltage measurements of electron lifetimes. The Al2O3 layers were found to suppress dark current and increase electron lifetimes with increasing Al 2O3 thickness in both configurations. For thin barrier layers, gains in open-circuit voltage and concomitant increases in efficiency were observed, although at greater thicknesses, losses in photocurrent caused net decreases in efficiency. A close comparison of the electron lifetimes in TiO2 in the TiO2/Al2O3/QD and TiO2/QD/Al2O3 configurations suggests that electron transfer from TiO2 to spiro-OMeTAD is a major source of recombination in ss-QDSSCs, though recombination of TiO2 electrons with oxidized QDs can also limit electron lifetimes, particularly if the regeneration of oxidized QDs is hindered by a too-thick coating of the barrier layer. © 2013 American Chemical Society.

  15. Investigation of Thickness Dependence of Metal Layer in Al/Mo/4H-SiC Schottky Barrier Diodes.

    Science.gov (United States)

    Lee, Seula; Lee, Jinseon; Kang, Tai-Young; Kyoung, Sinsu; Jung, Eun Sik; Kim, Kyung Hwan

    2015-11-01

    In this paper, we present the preparation and characterization of Schottky barrier diodes based on silicon carbide with various Schottky metal layer thickness values. In this structure, molybdenum and aluminum were employed as the Schottky barrier metal and top electrode, respectively. Schottky metal layers were deposited with thicknesses ranging from 1000 to 3000 Å, and top electrodes were deposited with thickness as much as 3000 Å. The deposition of both metal layers was performed using the facing target sputtering (FTS) method, and the fabricated samples were annealed with the tubular furnace at 300 degrees C under argon ambient for 10 min. The Schottky barrier height, series resistance, and ideality factor was calculated from the forward I-V characteristic curve using the methods proposed by Cheung and Cheung, and by Norde. For as-deposited Schottky diodes, we observed an increase of the threshold voltage (V(T)) as the thickness of the Schottky metal layer increased. After the annealing, the Schottky barrier heights (SBHs) of the diodes, including Schottky metal layers of over 2000 Å, increased. In the case of the Schottky metal layer deposited to 1000 Å, the barrier heights decreased due to the annealing process. This may have been caused by the interfacial penetration phenomenon through the Schottky metal layer. For variations of V(T), the SBH changed with a similar tendency. The ideality factor and series resistance showed no significant changes before or after annealing. This indicates that this annealing condition is appropriate for Mo SiC structures. Our results confirm that it is possible to control V(T) by adjusting the thickness of the Schottky metal layer.

  16. Study on Stress Development in the Phase Transition Layer of Thermal Barrier Coatings

    Directory of Open Access Journals (Sweden)

    Yijun Chai

    2016-09-01

    Full Text Available Stress development is one of the significant factors leading to the failure of thermal barrier coating (TBC systems. In this work, stress development in the two phase mixed zone named phase transition layer (PTL, which grows between the thermally grown oxide (TGO and the bond coat (BC, is investigated by using two different homogenization models. A constitutive equation of the PTL based on the Reuss model is proposed to study the stresses in the PTL. The stresses computed with the proposed constitutive equation are compared with those obtained with Voigt model-based equation in detail. The stresses based on the Voigt model are slightly higher than those based on the Reuss model. Finally, a further study is carried out to explore the influence of phase transition proportions on the stress difference caused by homogenization models. Results show that the stress difference becomes more evident with the increase of the PTL thickness ratio in the TGO.

  17. Barrier layer in the northeastern South China Sea and its formation mechanism

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Robust evidence for the barrier layer (BL) in the northeastern South China Sea (SCS) (16°-25°N, 112°-124°E) is presented. The occurrence rate of the BL peaks in the autumn (45.7%) and then the summer (31.1%) and the spring (23.3%), sequently. It is estimated that the annual occurrence rate of the BL reaches about 40.0% in the central northeastern SCS (18°-22°N, 112°-120°E) and the Luzon Strait. Stratification-formed (Rain-formed) mechanism is the major factor responsible for the occurrence of the BL in the northeastern SCS in the spring (the summer and autumn), respectively. The rainfall observation from TRMM provides reliable evidence for the latter.

  18. Influence of hydroxyl content of binders on rheological properties of cerium-gadolinium oxide (CGO) screen printing inks

    DEFF Research Database (Denmark)

    Marani, Debora; Gadea, Christophe; Hjelm, Johan;

    2015-01-01

    vinyl resins) were selected and characterized in solution via viscosimetry method. A high degree of hyper-entanglement was observed for ethyl cellulose polymers, whereas a mitigated effect characterized the two vinyl resins. Cerium-gadolinium oxides (CGO)-based inks, prepared using the selected binders...

  19. Performance-Microstructure Relations in Ni/CGO Infiltrated Nb-doped SrTiO3 SOFC Anodes

    DEFF Research Database (Denmark)

    Ramos, Tania; Bernuy-Lopez, Carlos; Reddy Sudireddy, Bhaskar;

    2012-01-01

    Nb-doped SrTiO3 solid oxide fuel cell (SOFC) anodes, infiltrated with CGO/Ni, were investigated by electrochemical impedance spectroscopy (EIS) and high resolution microscopy techniques, upon varying production and testing parameters. The electrochemical analysis involved a combination...

  20. Design, installation, and performance of a multi-layered permeable reactive barrier, Los Alamos National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Kaszuba, J. P. (John P.); Longmire, P. A. (Patrick A.); Strietelmeier, E. A. (Elizabeth A.); Taylor, T. P. (Tammy P.); Den-Baars, P. S. (Peter S.)

    2004-01-01

    A multi-layered permeable reactive barrier (PRB) has been installed in Mortandad Canyon, on the Pajarito Plateau in the north-central part of LANL, to demonstrate in-situ treatment of a suite of contaminants with dissimilar geochemical properties. The PRB will also mitigate possible vulnerabilities from downgradient contaminant movement within alluvial and deeper perched groundwater. Mortandad Canyon was selected as the location for this demonstration project because the flow of alluvial groundwater is constrained by the geology of the canyon, a large network of monitoring wells already were installed along the canyon reach, and the hydrochemistry and contaminant history of the canyon is well-documented. The PRB uses a funnel-and-gate system with a series of four reactive media cells to immobilize or destroy contaminants present in alluvial groundwater, including strontium-90, plutonium-238,239,240, americium-241, perchlorate, and nitrate. The four cells, ordered by sequence of contact with the groundwater, consist of gravel-sized scoria (for colloid removal); phosphate rock containing apatite (for metals and radionuclides); pecan shells and cotton seed admixed with gravel (bio-barrier, to deplete dissolved oxygen and destroy potential RCRA organic compounds, nitrate and perchlorate); and limestone (pH buffering and anion adsorption). Design elements of the PRB are based on laboratory-scale treatability studies and on a field investigation of hydrologic, geochemical, and geotechnical parameters. The PRB was designed with the following criteria: 1-day residence time within the biobarrier, 10-year lifetime, minimization of surface water infiltration and erosion, optimization of hydraulic capture, and minimization of excavated material requiring disposal. Each layer has been equipped with monitoring wells or ports to allow sampling of groundwater and reactive media, and monitor wells are located immediately adjacent to the up- and down-gradient perimeter of the

  1. Enhanced Barrier Performance of Engineered Paper by Atomic Layer Deposited Al2O3 Thin Films.

    Science.gov (United States)

    Mirvakili, Mehr Negar; Van Bui, Hao; van Ommen, J Ruud; Hatzikiriakos, Savvas G; Englezos, Peter

    2016-06-01

    Surface modification of cellulosic paper is demonstrated by employing plasma assisted atomic layer deposition. Al2O3 thin films are deposited on paper substrates, prepared with different fiber sizes, to improve their barrier properties. Thus, a hydrophobic paper is created with low gas permeability by combining the control of fiber size (and structure) with atomic layer deposition of Al2O3 films. Papers are prepared using Kraft softwood pulp and thermomechanical pulp. The cellulosic wood fibers are refined to obtain fibers with smaller length and diameter. Films of Al2O3, 10, 25, and 45 nm in thickness, are deposited on the paper surface. The work demonstrates that coating of papers prepared with long fibers efficiently reduces wettability with slight enhancement in gas permeability, whereas on shorter fibers, it results in significantly lower gas permeability. Wettability studies on Al2O3 deposited paper substrates have shown water wicking and absorption over time only in papers prepared with highly refined fibers. It is also shown that there is a certain fiber size at which the gas permeability assumes its minimum value, and further decrease in fiber size will reverse the effect on gas permeability.

  2. Compressibility effects on the non-linear receptivity of boundary layers to dielectric barrier discharges

    Science.gov (United States)

    Denison, Marie F. C.

    The reduction of drag and aerodynamic heating caused by boundary layer transition is of central interest for the development of hypersonic vehicles. Receptivity to flow perturbation in the form of Tollmien-Schlichting (TS) wave growth often determines the first stage of the transition process, which can be delayed by depositing specific excitations into the boundary layer. Weakly ionized Dielectric Barrier Discharge (DBD) actuators are being investigated as possible sources of such excitations, but little is known today about their interaction with high-speed flows. In this framework, the first part of the thesis is dedicated to a receptivity study of laminar compressible boundary layers over a flat plate by linear stability analysis following an adjoint operator formulation, under DBD representative excitations assumed independent of flow conditions. The second part of the work concentrates on the development of a coupled plasma-Navier and Stokes solver targeted at the study of supersonic flow and compressibility effects on DBD forcing and non-parallel receptivity. The linear receptivity study of quasi-parallel compressible flows reveals several interesting features such as a significant shift of the region of maximum receptivity deeper into the flow at high Mach number and strong wave amplitude reduction compared to incompressible flows. The response to DBD relevant excitation distributions and to variations of the base flow conditions and system length scales follows these trends. Observed absolute amplitude changes and relative sensitivity modifications between source types are related to the evolution of the offset between forcing peak profile and relevant adjoint mode maximum. The analysis highlights the crucial importance of designing and placing the actuator in a way that matches its force field to the position of maximum boundary layer receptivity for the specific flow conditions of interest. In order to address the broad time and length scale spectrum

  3. Electrochemical Impedance Spectroscopy Investigation of the Anodic Functionalities and Processes in LSCM-CGO-Ni Systems

    KAUST Repository

    Boulfrad, Samir

    2015-07-17

    Electrochemical impedance spectroscopy was used to characterize anode compositions made of (La0.75Sr0.25)0.97Cr0.5Mn0.5O3 (LSCM) and gadolinia doped ceria (CGO) with and without additional submicron Ni, or exsoluted Ni nanoparticles. In addition, the effects of the anode gas flow rate and the working temperature were investigated. Higher content of the ionic conductor leads to a decrease of the impedance in the frequency range from 100 Hz to 10 Hz. The effect of the catalyst component was investigated while keeping the electronic conductivity unchanged in the tested materials. Enhanced catalytic activity was demonstrated to considerably decrease the impedance especially in the frequency range between 100 Hz to 1 Hz. The change in the gas flow rate affects mainly the impedance bellow 1 Hz. © The Electrochemical Society.

  4. Electrochemical Oxidation of Propene with a LSF15/CGO10 Electrochemical Reactor

    DEFF Research Database (Denmark)

    Ippolito, Davide; Kammer Hansen, Kent

    2014-01-01

    A porous electrochemical reactor, made of La0.85Sr0.15FeO3 (LSF) as electrode and Ce0.9Gd0.1O1.95 (CGO) as electrolyte, was studied for the electrochemical oxidation of propene over a wide range of temperatures. Polarization was found to enhance propene oxidation rate. Ce0.9Gd0.1O1.95 was used...... as infiltration material to enhance the effect of polarization on propene oxidation rate, especially at low temperatures. The influence of infiltrated material, as a function of heat treatment, on the reactor electrochemical behavior has been evaluated by using electrochemical impedance spectroscopy...... in suppressing the competing oxygen evolution reaction and promoting the oxidation of propene under polarization, with faradaic efficiencies above 70% at 250◦C. © 2014 The Electrochemical Society....

  5. Detailed impedance characterization of a well performing and durable Ni:CGO infiltrated cermet anode for metal-supported solid oxide fuel cells

    DEFF Research Database (Denmark)

    Nielsen, Jimmi; Klemensø, Trine; Blennow Tullmar, Peter

    2012-01-01

    Further knowledge of the novel, well performing and durable Ni:CGO infiltrated cermet anode for metal supported fuel cells has been acquired by means of a detailed impedance spectroscopy study. The anode impedance was shown to consist of three arcs. Porous electrode theory (PET) represented...... as a transmission line response could account for the intermediate frequency arc. The PET model enabled a detailed insight into the effect of adding minor amounts of Ni into the infiltrated CGO and allowed an estimation of important characteristics such as the electrochemical utilization thickness of the anode...... of the infiltrated submicron sized particles was surprisingly robust. TEM analysis revealed the nano sized Ni particles to be trapped within the CGO matrix, which along the self limiting grain growth of the CGO seem to be able to stabilize the submicron structured anode....

  6. Thin-film Nanofibrous Composite Membranes Containing Cellulose or Chitin Barrier Layers Fabricated by Ionic Liquids

    Energy Technology Data Exchange (ETDEWEB)

    H Ma; B Hsiao; B Chu

    2011-12-31

    The barrier layer of high-flux ultrafiltration (UF) thin-film nanofibrous composite (TFNC) membranes for purification of wastewater (e.g., bilge water) have been prepared by using cellulose, chitin, and a cellulose-chitin blend, regenerated from an ionic liquid. The structures and properties of regenerated cellulose, chitin, and a cellulose-chitin blend were analyzed with thermogravimetric analysis (TGA) and wide-angle X-ray diffraction (WAXD). The surface morphology, pore size and pore size distribution of TFNC membranes were determined by SEM images and molecular weight cut-off (MWCO) methods. An oil/water emulsion, a model of bilge water, was used as the feed solution, and the permeation flux and rejection ratio of the membranes were investigated. TFNC membranes based on the cellulose-chitin blend exhibited 10 times higher permeation flux when compared with a commercial UF membrane (PAN10, Sepro) with a similar rejection ratio after filtration over a time period of up to 100 h, implying the practical feasibility of such membranes for UF applications.

  7. Remodeling of Tight Junctions and Enhancement of Barrier Integrity of the CACO-2 Intestinal Epithelial Cell Layer by Micronutrients.

    Science.gov (United States)

    Valenzano, Mary Carmen; DiGuilio, Katherine; Mercado, Joanna; Teter, Mimi; To, Julie; Ferraro, Brendan; Mixson, Brittany; Manley, Isabel; Baker, Valerissa; Moore, Beverley A; Wertheimer, Joshua; Mullin, James M

    2015-01-01

    The micronutrients zinc, quercetin, butyrate, indole and berberine were evaluated for their ability to induce remodeling of epithelial tight junctions (TJs) and enhance barrier integrity in the CACO-2 gastrointestinal epithelial cell culture model. All five of these chemically very diverse micronutrients increased transepithelial electrical resistance (Rt) significantly, but only berberine also improved barrier integrity to the non-electrolyte D-mannitol. Increases of Rt as much as 200% of untreated controls were observed. Each of the five micronutrients also induced unique, signature-like changes in TJ protein composition, suggesting multiple pathways (and TJ arrangements) by which TJ barrier function can be enhanced. Decreases in abundance by as much as 90% were observed for claudin-2, and increases of over 300% could be seen for claudins -5 and -7. The exact effects of the micronutrients on barrier integrity and TJ protein composition were found to be highly dependent on the degree of differentiation of the cell layer at the time it was exposed to the micronutrient. The substratum to which the epithelial layer adheres was also found to regulate the response of the cell layer to the micronutrient. The implications of these findings for therapeutically decreasing morbidity in Inflammatory Bowel Disease are discussed.

  8. Densification of Ce0.9Gd0.1O1.95 barrier layer by in-situ solid state reaction

    DEFF Research Database (Denmark)

    Ni, De Wei; Esposito, Vincenzo

    2014-01-01

    out with small amount of either cobalt or copper nitrate solutions as sintering aids. Final sintering of the CGO-BL at temperature T2 (1250e1275 _C, T2 > T1) is used to promote an SSR between the sintering aid and CGO-BL to obtain densification and grain growth. The approach proposed in this work...

  9. Design and fabrication of highly heat-resistant Mo/Si multilayer soft X-ray mirrors with interleaved barrier layers.

    Science.gov (United States)

    Takenaka, H; Ito, H; Haga, T; Kawamura, T

    1998-05-01

    Introducing interleaved carbon barrier layers improves the heat-resistance of Mo/Si multilayers. The soft X-ray reflectivities of the multilayers were calculated, and the effects of heating on both the reflectivities and layer structures of Mo/Si multilayers with and without barrier layers were investigated using X-ray diffraction and transmission electron microscopy. The results show that, for applications using intense soft X-ray beams, Mo/Si multilayers with interleaved carbon barrier layers are better mirrors than Mo/Si multilayers because they have much better heat resistance and almost the same soft X-ray reflectivity as the Mo/Si multilayers.

  10. Ultraviolet-enhanced light emitting diode employing individual ZnO microwire with SiO{sub 2} barrier layers

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Yingtian [State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012 (China); State Key Laboratory of High Power Semiconductor Laser, Changchun University of Science and Technology, Changchun 130022 (China); Xu, Li [State Key Laboratory of High Power Semiconductor Laser, Changchun University of Science and Technology, Changchun 130022 (China); Dai, Jun [State Key Laboratory of Bioelectronics, Southeast University, Nanjing 210096 (China); Ma, Yan; Chu, Xianwei; Zhang, Yuantao; Du, Guotong; Zhang, Baolin; Yin, Jingzhi, E-mail: yjz886666@163.com [State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun 130012 (China)

    2015-05-25

    This paper details the fabrication of n-ZnO single microwire (SMW)-based high-purity ultraviolet light-emitting diodes (UV-LEDs) with an added SiO{sub 2} barrier layer on the p-Si substrate. However, the current-voltage (I-V) curve exhibited non-ideal rectifying characteristics. Under forward bias, both UV and visible emissions could be detected by electroluminescence (EL) measurement. When bias voltage reached 60 V at room temperature, a UV emission spike occurred at 390 nm originating from the n-ZnO SMW. Compared with the EL spectrum of the n-ZnO SMW/p-Si heterojunction device without the SiO{sub 2} barrier layer, we saw improved UV light extraction efficiency from the current-blocking effect of the SiO{sub 2} layer. The intense UV emission in the n-ZnO SMW/SiO{sub 2}/p-Si heterojunction indicated that the SiO{sub 2} barrier layer can restrict the movement of electrons as expected and result in effective electron-hole recombination in ZnO SMW.

  11. Optimal deposition conditions of TiN barrier layers for the growth of vertically aligned carbon nanotubes onto metallic substrates

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Cespedes, J; Bertran, E [FEMAN Group, IN2UB, Departament de Fisica Aplicada i Optica, Universitat de Barcelona, C/ Martii Franques, 1, E-08028, Barcelona (Spain); Alvarez-Garcia, J [Centre de Recerca i Investigacio de Catalunya, S.A., Travessera de Gracia 108, Entressol, E-08012, Barcelona (Spain); Zhang, X; Hampshire, J [Teer Coatings Ltd, West Stone House, Berry Hill Industrial Estate, Droitwich, Worcestershire, WR9 9AS (United Kingdom)

    2009-05-21

    Plasma enhanced chemical deposition (PECVD) has proven over the years to be the preferred method for the growth of vertically aligned carbon nanotubes and nanofibres (VACNTs and VACNFs, respectively). In particular, carbon nanotubes (CNTs) grown on metallic surfaces present a great potential for high power applications, including low resistance electrical contacts, high power switches, electron guns or supercapacitors. Nevertheless, the deposition of CNTs onto metallic substrates is challenging, due to the intrinsic incompatibility between such substrates and the metallic precursor layers required to promote the growth of CNTs. In particular, the formation of CNT films is assisted by the presence of a nanometric (10-100 nm) monolayer of catalyst clusters, which act as nucleation sites for CNTs. The nanometric character of the precursor layer, together with the high growth temperature involved during the PECVD process ({approx}700 deg. C), strongly favours the in-diffusion of the catalyst nanoclusters into the bulk of the metallic substrate, which results in a dramatic reduction in the nucleation of CNTs. In order to overcome this problem, it is necessary to coat the metallic substrate with a diffusion barrier layer, prior to the growth of the catalyst precursor. Unlike other conventional ceramic barrier layers, TiN provides high electrical conductivity, thus being a promising candidate for use as barrier material in applications involving low resistance contacts. In this work we investigate the anti-diffusion properties of TiN sputtered coatings and its potential applicability to the growth of CNTs onto copper substrates, using Fe as catalyst material. The barrier and catalyst layers were deposited by magnetron sputtering. Auger electron spectroscopy was used to determine the diffusivity of Fe into TiN. Morphological characterization of the CNTs coatings was performed on scanning and transmission electron microscopes. Raman spectroscopy and x-ray diffraction were

  12. Efficient, air-stable colloidal quantum dot solar cells encapsulated using atomic layer deposition of a nanolaminate barrier

    KAUST Repository

    Ip, Alexander H.

    2013-12-23

    Atomic layer deposition was used to encapsulate colloidal quantum dot solar cells. A nanolaminate layer consisting of alternating alumina and zirconia films provided a robust gas permeation barrier which prevented device performance degradation over a period of multiple weeks. Unencapsulated cells stored in ambient and nitrogen environments demonstrated significant performance losses over the same period. The encapsulated cell also exhibited stable performance under constant simulated solar illumination without filtration of harsh ultraviolet photons. This monolithically integrated thin film encapsulation method is promising for roll-to-roll processed high efficiency nanocrystal solar cells. © 2013 AIP Publishing LLC.

  13. Lifetimes of organic photovoltaics: photochemistry, atmosphere effects and barrier layers in ITO-MEHPPV:PCBM-aluminium devices

    DEFF Research Database (Denmark)

    Krebs, Frederik C; Carlé, Jon Eggert; Cruys-Bagger, N.;

    2005-01-01

    , mode of preparation and barrier layers by recording the short circuit current as a function of time. Two exponential fits to the decay curves allowed for the extraction of the time constants for different degradation processes. For the periods of time studied here (24-300 h), the decay curves could...... be fitted with two exponential functions. Common to the preparations were that the first half-life remained short and was independent of the presence of oxygen. When fullerenes were employed by sublimation of a layer Of C-60 or as the soluble PCBM, the first half-life was an order of magnitude longer...

  14. Electroless nickel alloy deposition on SiO2 for application as a diffusion barrier and seed layer in 3D copper interconnect technology.

    Science.gov (United States)

    Kim, Tae-Yoo; Son, Hwa-Jin; Lim, Seung-Kyu; Song, Young-Il; Park, Hwa-Sun; Suh, Su-Jeong

    2014-12-01

    Electroless Ni-P films were investigated with the aim of application as barrier and seed layers in 3D interconnect technology. Different shapes of blind-via holes were fabricated with a deep reactive ion etcher and SiO2 formed on these holes as an insulating layer. The surface of the substrate has been made hydrophilic by O2 plasma treatment with 100 W of power for 20 min. Electroless Ni-P films were deposited as both a diffusion barrier and a seed layer for Cu filling process. Prior to plating, substrates were activated in a palladium chloride solution after sensitization in a tin chloride solution with various conditions in order to deposit uniform films in TSV. After the formation of the electroless barrier layer, electro Cu was plated directly on the barrier layer. Ni-P films fabricated in blind-via holes were observed by scanning electron microscope. Energy dispersive spectroscopy line scanning was carried out for evaluating the diffusion barrier properties of the Ni-P films. The electroless Ni-P layer worked well as a Cu diffusion barrier until 300 degrees C. However, Cu ions diffused into barrier layer when the annealing temperature increases over 400 degrees C.

  15. Research Update: Reactively sputtered nanometer-thin ZrN film as a diffusion barrier between Al and boron layers for radiation detector applications

    Science.gov (United States)

    Golshani, Negin; Mohammadi, V.; Schellevis, H.; Beenakker, C. I. M.; Ishihara, R.

    2014-10-01

    In this paper, optimization of the process flow for PureB detectors is investigated. Diffusion barrier layers between a boron layer and the aluminum interconnect can be used to enhance the performance and visual appearance of radiation detectors. Few nanometers-thin Zirconium Nitride (ZrN) layer deposited by reactive sputtering in a mixture of Ar/N2, is identified as a reliable diffusion barrier with better fabrication process compatibility than others. The barrier properties of this layer have been tested for different boron layers deposited at low and high temperatures with extensive optical microscopy analyses, electron beam induced current, SEM, and electrical measurements. This study demonstrated that spiking behavior of pure Al on Si can be prevented by the thin ZrN layer thus improving the performance of the radiation detectors fabricated using boron layer.

  16. Research Update: Reactively sputtered nanometer-thin ZrN film as a diffusion barrier between Al and boron layers for radiation detector applications

    Energy Technology Data Exchange (ETDEWEB)

    Golshani, Negin, E-mail: negingolshani@gmail.com; Mohammadi, V.; Schellevis, H.; Beenakker, C. I. M.; Ishihara, R. [ECTM, DIMES, Faculty of Electrical Engineering (EWI), Delft University of Technology (TU Delft), Feldmannweg 17, P.O. Box 5053, 2628 CT Delft (Netherlands)

    2014-10-01

    In this paper, optimization of the process flow for PureB detectors is investigated. Diffusion barrier layers between a boron layer and the aluminum interconnect can be used to enhance the performance and visual appearance of radiation detectors. Few nanometers-thin Zirconium Nitride (ZrN) layer deposited by reactive sputtering in a mixture of Ar/N{sub 2}, is identified as a reliable diffusion barrier with better fabrication process compatibility than others. The barrier properties of this layer have been tested for different boron layers deposited at low and high temperatures with extensive optical microscopy analyses, electron beam induced current, SEM, and electrical measurements. This study demonstrated that spiking behavior of pure Al on Si can be prevented by the thin ZrN layer thus improving the performance of the radiation detectors fabricated using boron layer.

  17. Research Update: Reactively sputtered nanometer-thin ZrN film as a diffusion barrier between Al and boron layers for radiation detector applications

    Directory of Open Access Journals (Sweden)

    Negin Golshani

    2014-10-01

    Full Text Available In this paper, optimization of the process flow for PureB detectors is investigated. Diffusion barrier layers between a boron layer and the aluminum interconnect can be used to enhance the performance and visual appearance of radiation detectors. Few nanometers-thin Zirconium Nitride (ZrN layer deposited by reactive sputtering in a mixture of Ar/N2, is identified as a reliable diffusion barrier with better fabrication process compatibility than others. The barrier properties of this layer have been tested for different boron layers deposited at low and high temperatures with extensive optical microscopy analyses, electron beam induced current, SEM, and electrical measurements. This study demonstrated that spiking behavior of pure Al on Si can be prevented by the thin ZrN layer thus improving the performance of the radiation detectors fabricated using boron layer.

  18. The role of the spray pyrolysed Al2O3 barrier layer in achieving high efficiency solar cells on flexible steel substrates

    Science.gov (United States)

    Gledhill, Sophie E.; Zykov, Anton; Rissom, Thorsten; Caballero, Raquel; Kaufmann, Christian A.; Fischer, Christian-Herbert; Lux-Steiner, Martha; Efimova, Varvara; Hoffmann, Volker; Oswald, Steffen

    2011-07-01

    Thin film chalcopyrite solar cells grown on light-weight, flexible steel substrates are poised to enter the photovoltaic market. To guarantee good solar cell performance, the diffusion of iron from the steel into the CIGSe absorber material must be hindered during layer deposition. A barrier layer is thus required to isolate the solar module from the metal substrate, both electronically and chemically. Ideally the barrier layer would be deposited by a cheap roll-to-roll process suitable to coat flexible steel substrates. Aluminium oxide deposited by spray pyrolysis matches the criteria. The coating is homogeneous over rough substrates allowing comparatively thin barrier layers to be utilized. In this article, solar cell results are presented contrasting the device performance made with a barrier layer to that without a barrier layer. Secondary Ion Mass spectrometry (SIMS) measurements show that the spray pyrolysed barrier layer diminishes iron diffusion to the chalcopyrite absorber layer. The role of sodium, imperative for the growth of high efficiency chalcopyrite solar cells, and how it interacts with Al2O3 is discussed.

  19. Analysis of Al diffusion processes in TiN barrier layers for the application in silicon solar cell metallization

    Science.gov (United States)

    Kumm, J.; Samadi, H.; Chacko, R. V.; Hartmann, P.; Wolf, A.

    2016-07-01

    An evaporated Al layer is known as an excellent rear metallization for highly efficient solar cells, but suffers from incompatibility with a common solder process. To enable solar cell-interconnection and module integration, in this work the Al layer is complemented with a solder stack of TiN/Ti/Ag or TiN/NiV/Ag, in which the TiN layer acts as an Al diffusion barrier. X-ray photoelectron spectroscopy measurements prove that diffusion of Al through the stack and the formation of an Al2O3 layer on the stack's surface are responsible for a loss of solderability after a strong post-metallization anneal, which is often mandatory to improve contact resistance and passivation quality. An optimization of the reactive TiN sputter process results in a densification of the TiN layer, which improves its barrier quality against Al diffusion. However, measurements with X-ray diffraction and scanning electron microscopy show that small grains with vertical grain boundaries persist, which still offer fast diffusion paths. Therefore, the concept of stuffing is introduced. By incorporating oxygen into the grain boundaries of the sputtered TiN layer, Al diffusion is strongly reduced as confirmed by secondary ion mass spectroscopy profiles. A quantitative analysis reveals a one order of magnitude lower Al diffusion coefficient for stuffed TiN layers. This metallization system maintains its solderability even after strong post-metallization annealing at 425 °C for 15 min. This paper thus presents an industrially feasible, conventionally solderable, and long-term stable metallization scheme for highly efficient silicon solar cells.

  20. Double-Layer Gadolinium Zirconate/Yttria-Stabilized Zirconia Thermal Barrier Coatings Deposited by the Solution Precursor Plasma Spray Process

    Science.gov (United States)

    Jiang, Chen; Jordan, Eric H.; Harris, Alan B.; Gell, Maurice; Roth, Jeffrey

    2015-08-01

    Advanced thermal barrier coatings (TBCs) with lower thermal conductivity, increased resistance to calcium-magnesium-aluminosilicate (CMAS), and improved high-temperature capability, compared to traditional yttria-stabilized zirconia (YSZ) TBCs, are essential to higher efficiency in next generation gas turbine engines. Double-layer rare-earth zirconate/YSZ TBCs are a promising solution. From a processing perspective, solution precursor plasma spray (SPPS) process with its unique and beneficial microstructural features can be an effective approach to obtaining the double-layer microstructure. Previously durable low-thermal-conductivity YSZ TBCs with optimized layered porosity, called the inter-pass boundaries (IPBs) were produced using the SPPS process. In this study, an SPPS gadolinium zirconate (GZO) protective surface layer was successfully added. These SPPS double-layer TBCs not only retained good cyclic durability and low thermal conductivity, but also demonstrated favorable phase stability and increased surface temperature capabilities. The CMAS resistance was evaluated with both accumulative and single applications of simulated CMAS in isothermal furnaces. The double-layer YSZ/GZO exhibited dramatic improvement in the single application, but not in the continuous one. In addition, to explore their potential application in integrated gasification combined cycle environments, double-layer TBCs were tested under high-temperature humidity and encouraging performance was recorded.

  1. Accuracy of Young's Modulus of Thermal Barrier Coating Layer Determined by Bending Resonance of a Multilayered Specimen

    Science.gov (United States)

    Waki, Hiroyuki; Takizawa, Kensuke; Kato, Masahiko; Takahashi, Satoru

    2016-04-01

    The Young's modulus of individual layer in thermal barrier coating (TBC) system is an important mechanical property because it allows determining the parameters of materials mechanics in the TBC system. In this study, we investigated the accuracy of the evaluation method for the Young's modulus of a TBC layer according to the first bending resonance of a multilayered specimen comprising a substrate, bond coating, and TBC. First, we derived a closed-form solution for the Young's modulus of the TBC layer using the equation of motion for the bending vibration of a composite beam. The solution for the three-layered model provided the Young's modulus of the TBC layer according to the measured resonance frequency and the known values for the dimensions, mass, and Young's moduli of all the other layers. Next, we analyzed the sensitivity of these input errors to the evaluated Young's modulus and revealed the important inputs for accurate evaluation. Finally, we experimentally confirmed that the Young's modulus of the TBC layer was obtained accurately by the developed method.

  2. Improved Modeling Approaches for Constrained Sintering of Bi-Layered Porous Structures

    DEFF Research Database (Denmark)

    Tadesse Molla, Tesfaye; Frandsen, Henrik Lund; Esposito, Vincenzo;

    2012-01-01

    Shape instabilities during constrained sintering experiment of bi-layer porous and dense cerium gadolinium oxide (CGO) structures have been analyzed. An analytical and a numerical model based on the continuum theory of sintering has been implemented to describe the evolution of bow and densificat......Shape instabilities during constrained sintering experiment of bi-layer porous and dense cerium gadolinium oxide (CGO) structures have been analyzed. An analytical and a numerical model based on the continuum theory of sintering has been implemented to describe the evolution of bow...

  3. A Theoretical Model for Predicting Residual Stress Generation in Fabrication Process of Double-Ceramic-Layer Thermal Barrier Coating System

    Science.gov (United States)

    Song, Yan; Wu, Weijie; Xie, Feng; Liu, Yilun; Wang, Tiejun

    2017-01-01

    Residual stress arisen in fabrication process of Double-Ceramic-Layer Thermal Barrier Coating System (DCL-TBCs) has a significant effect on its quality and reliability. In this work, based on the practical fabrication process of DCL-TBCs and the force and moment equilibrium, a theoretical model was proposed at first to predict residual stress generation in its fabrication process, in which the temperature dependent material properties of DCL-TBCs were incorporated. Then, a Finite Element method (FEM) has been carried out to verify our theoretical model. Afterwards, some important geometric parameters for DCL-TBCs, such as the thickness ratio of stabilized Zirconia (YSZ, ZrO2-8%Y2O3) layer to Lanthanum Zirconate (LZ, La2Zr2O7) layer, which is adjustable in a wide range in the fabrication process, have a remarkable effect on its performance, therefore, the effect of this thickness ratio on residual stress generation in the fabrication process of DCL-TBCs has been systematically studied. In addition, some thermal spray treatment, such as the pre-heating treatment, its effect on residual stress generation has also been studied in this work. It is found that, the final residual stress mainly comes from the cooling down process in the fabrication of DCL-TBCs. Increasing the pre-heating temperature can obviously decrease the magnitude of residual stresses in LZ layer, YSZ layer and substrate. With the increase of the thickness ratio of YSZ layer to LZ layer, magnitudes of residual stresses arisen in LZ layer and YSZ layer will increase while residual stress in substrate will decrease. PMID:28103275

  4. A Theoretical Model for Predicting Residual Stress Generation in Fabrication Process of Double-Ceramic-Layer Thermal Barrier Coating System.

    Science.gov (United States)

    Song, Yan; Wu, Weijie; Xie, Feng; Liu, Yilun; Wang, Tiejun

    2017-01-01

    Residual stress arisen in fabrication process of Double-Ceramic-Layer Thermal Barrier Coating System (DCL-TBCs) has a significant effect on its quality and reliability. In this work, based on the practical fabrication process of DCL-TBCs and the force and moment equilibrium, a theoretical model was proposed at first to predict residual stress generation in its fabrication process, in which the temperature dependent material properties of DCL-TBCs were incorporated. Then, a Finite Element method (FEM) has been carried out to verify our theoretical model. Afterwards, some important geometric parameters for DCL-TBCs, such as the thickness ratio of stabilized Zirconia (YSZ, ZrO2-8%Y2O3) layer to Lanthanum Zirconate (LZ, La2Zr2O7) layer, which is adjustable in a wide range in the fabrication process, have a remarkable effect on its performance, therefore, the effect of this thickness ratio on residual stress generation in the fabrication process of DCL-TBCs has been systematically studied. In addition, some thermal spray treatment, such as the pre-heating treatment, its effect on residual stress generation has also been studied in this work. It is found that, the final residual stress mainly comes from the cooling down process in the fabrication of DCL-TBCs. Increasing the pre-heating temperature can obviously decrease the magnitude of residual stresses in LZ layer, YSZ layer and substrate. With the increase of the thickness ratio of YSZ layer to LZ layer, magnitudes of residual stresses arisen in LZ layer and YSZ layer will increase while residual stress in substrate will decrease.

  5. Modelling water vapour permeability through atomic layer deposition coated photovoltaic barrier defects

    Energy Technology Data Exchange (ETDEWEB)

    Elrawemi, Mohamed, E-mail: Mohamed.elrawemi@hud.ac.uk [EPSRC Centre for Innovative Manufacturing in Advanced Metrology, School of Computing and Engineering, University of Huddersfield, Huddersfield (United Kingdom); Blunt, Liam; Fleming, Leigh [EPSRC Centre for Innovative Manufacturing in Advanced Metrology, School of Computing and Engineering, University of Huddersfield, Huddersfield (United Kingdom); Bird, David, E-mail: David.Bird@uk-cpi.com [Centre for Process Innovation Limited, Sedgefield, County Durham (United Kingdom); Robbins, David [Centre for Process Innovation Limited, Sedgefield, County Durham (United Kingdom); Sweeney, Francis [EPSRC Centre for Innovative Manufacturing in Advanced Metrology, School of Computing and Engineering, University of Huddersfield, Huddersfield (United Kingdom)

    2014-11-03

    Transparent barrier films such as Al{sub 2}O{sub 3} used for prevention of oxygen and/or water vapour permeation are the subject of increasing research interest when used for the encapsulation of flexible photovoltaic modules. However, the existence of micro-scale defects in the barrier surface topography has been shown to have the potential to facilitate water vapour ingress, thereby reducing cell efficiency and causing internal electrical shorts. Previous work has shown that small defects (≤ 3 μm lateral dimension) were less significant in determining water vapour ingress. In contrast, larger defects (≥ 3 μm lateral dimension) seem to be more detrimental to the barrier functionality. Experimental results based on surface topography segmentation analysis and a model presented in this paper will be used to test the hypothesis that the major contributing defects to water vapour transmission rate are small numbers of large defects. The model highlighted in this study has the potential to be used for gaining a better understanding of photovoltaic module efficiency and performance. - Highlights: • A model of water vapour permeation through barrier defects is presented. • The effect of the defects on the water vapour permeability is investigated. • Defect density correlates with water vapour permeability. • Large defects may dominate the permeation properties of the barrier film.

  6. Diffusion barrier and adhesion properties of SiO(x)N(y) and SiO(x) layers between Ag/polypyrrole composites and Si substrates.

    Science.gov (United States)

    Horváth, Barbara; Kawakita, Jin; Chikyow, Toyohiro

    2014-06-25

    This paper describes the interface reactions and diffusion between silver/polypyrrole (Ag/PPy) composite and silicon substrate. This composite material can be used as a novel technique for 3D-LSI (large-scale integration) by the fast infilling of through-silicon vias (TSV). By immersion of the silicon wafer with via holes into the dispersed solution of Ag/PPy composite, the holes are filled with the composite. It is important to develop a layer between the composite and the Si substrate with good diffusion barrier and adhesion characteristics. In this paper, SiOx and two types of SiOxNy barrier layers with various thicknesses were investigated. The interface structure between the Si substrate, the barrier, and the Ag/PPy composite was characterized by transmission electron microscopy. The adhesion and diffusion properties of the layers were established for Ag/PPy composite. Increasing thickness of SiOx proved to permit less Ag to transport into the Si substrate. SiOxNy barrier layers showed very good diffusion barrier characteristics; however, their adhesion depended strongly on their composition. A barrier layer composition with good adhesion and Ag barrier properties has been identified in this paper. These results are useful for filling conductive metal/polymer composites into TSV.

  7. Intermediate type excitons in Schottky barriers of A{sup 3}B{sup 6} layer semiconductors and UV photodetectors

    Energy Technology Data Exchange (ETDEWEB)

    Alekperov, O.Z.; Guseinov, N.M.; Nadjafov, A.I. [Insitute of Physics of National Academy of Sinces of Azerbaijan, H. Javid av. 33, 1133 Baku (Azerbaijan)

    2006-09-15

    Photoelectric and photovoltaic spectra of Schottky barrier (SB) structures of InSe, GaSe and GaS layered semiconductors (LS) are investigated at quantum energies from the band edge excitons of corresponding materials up to 6.5eV. Spectral dependences of photoconductivity (PC) of photo resistors and barrier structures are strongly different at the quantum energies corresponding to the intermediate type excitons (ITE) observed in these semiconductors. It was suggested that high UV photoconductivity of A{sup 3}B{sup 6} LS is due to existence of high mobility light carriers in the depth of the band structure. It is shown that SB of semitransparent Au-InSe is high sensitive photo detector in UV region of spectra. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  8. Effects of the strain relaxation of an AlGaN barrier layer induced by various cap layers on the transport properties in AlGaN/GaN heterostructures

    Institute of Scientific and Technical Information of China (English)

    Liu Zi-Yang; Zhang Jin-Cheng; Duan Huan-Tao; Xue Jun-Shuai; Lin Zhi-Yu; Ma Jun-Cai; Xue Xiao-Yong; Hao Yue

    2011-01-01

    The strain relaxation of an AlGaN barrier layer may be influenced by a thin cap layer above,and affects the transport properties of AlGaN/GaN heterostructures. Compared with the slight strain relaxation found in AlGaN barrier layer without cap layer,it is found that a thin cap layer can induce considerable changes of strain state in the AIGaN barrier layer. The degree of relaxation of the AlGaN layer significantly influences the transport properties of the two-dimensional electron gas (2DEG) in AlGaN/GaN heterostructures. It is observed that electron mobility decreases with the increasing degree of relaxation of the AlGaN barrier,which is believed to be the main cause of the deterioration of crystalline quality and morphology on the AlGaN/GaN interface. On the other hand,both GaN and AIN cap layers lead to a decrease in 2DEG density. The reduction of 2DEG caused by the GaN cap layer may be attributed to the additional negative polarization charges formed at the interface between GaN and AIGaN,while the reduction of the piezoelectric effect in the AlGaN layer results in the decrease of 2DEG density in the case of AIN cap layer.

  9. Silica-sol-based spin-coating barrier layer against phosphorous diffusion for crystalline silicon solar cells.

    Science.gov (United States)

    Uzum, Abdullah; Fukatsu, Ken; Kanda, Hiroyuki; Kimura, Yutaka; Tanimoto, Kenji; Yoshinaga, Seiya; Jiang, Yunjian; Ishikawa, Yasuaki; Uraoka, Yukiharu; Ito, Seigo

    2014-01-01

    The phosphorus barrier layers at the doping procedure of silicon wafers were fabricated using a spin-coating method with a mixture of silica-sol and tetramethylammonium hydroxide, which can be formed at the rear surface prior to the front phosphorus spin-on-demand (SOD) diffusion and directly annealed simultaneously with the front phosphorus layer. The optimization of coating thickness was obtained by changing the applied spin-coating speed; from 2,000 to 8,000 rpm. The CZ-Si p-type silicon solar cells were fabricated with/without using the rear silica-sol layer after taking the sheet resistance measurements, SIMS analysis, and SEM measurements of the silica-sol material evaluations into consideration. For the fabrication of solar cells, a spin-coating phosphorus source was used to form the n(+) emitter and was then diffused at 930°C for 35 min. The out-gas diffusion of phosphorus could be completely prevented by spin-coated silica-sol film placed on the rear side of the wafers coated prior to the diffusion process. A roughly 2% improvement in the conversion efficiency was observed when silica-sol was utilized during the phosphorus diffusion step. These results can suggest that the silica-sol material can be an attractive candidate for low-cost and easily applicable spin-coating barrier for any masking purpose involving phosphorus diffusion.

  10. Valence-band offsets and Schottky barrier heights of layered semiconductors explained by interface-induced gap states

    Science.gov (United States)

    Mönch, Winfried

    1998-04-01

    Many metal chalcogenides are layered semiconductors. They consist of chalcogen-metal-chalcogen layers that are themselves bound by van der Waals forces. Hence, heterostructures involving layered compounds are abrupt and strain-free. Experimental valence-band offsets of heterostructures between GaSe, InSe, SnS2, SnSe2, MoS2, MoTe2, WSe2, and CuInSe2 and between some of these compounds and ZnSe, CdS, and CdTe as well as barrier heights of Au contacts on GaSe, InSe, MoS2, MoTe2, WSe2, ZnSe, CdS, and CdTe are analyzed. The valence-band discontinuities of the heterostructures and the barrier heights of the Schottky contact compounds are consistently described by the continuum of interface-induced gap states as the primary mechanism that governs the band lineup at semiconductor interfaces.

  11. Fabrication of stable electrode/diffusion barrier layers for thermoelectric filled skutterudite devices

    Energy Technology Data Exchange (ETDEWEB)

    Jie, Qing; Ren, Zhifeng; Chen, Gang

    2015-12-08

    Disclosed are methods for the manufacture of n-type and p-type filled skutterudite thermoelectric legs of an electrical contact. A first material of CoSi.sub.2 and a dopant are ball-milled to form a first powder which is thermo-mechanically processed with a second powder of n-type skutterudite to form a n-type skutterudite layer disposed between a first layer and a third layer of the doped-CoSi.sub.2. In addition, a plurality of components such as iron, and nickel, and at least one of cobalt or chromium are ball-milled form a first powder that is thermo-mechanically processed with a p-type skutterudite layer to form a p-type skutterudite layer "second layer" disposed between a first and a third layer of the first powder. The specific contact resistance between the first layer and the skutterudite layer for both the n-type and the p-type skutterudites subsequent to hot-pressing is less than about 10.0 .mu..OMEGA.cm.sup.2.

  12. Barrier properties of plastic films coated with an Al{sub 2}O{sub 3} layer by roll-to-toll atomic layer deposition

    Energy Technology Data Exchange (ETDEWEB)

    Hirvikorpi, Terhi, E-mail: Terhi.Hirvikorpi@picosun.com [Picosun Oy, Tietotie 3, FI-02150 Espoo (Finland); Laine, Risto, E-mail: Risto.Laine@picosun.com [Picosun Oy, Tietotie 3, FI-02150 Espoo (Finland); Vähä-Nissi, Mika, E-mail: Mika.Vaha-Nissi@vtt.fi [VTT Technical Research Centre of Finland, Biologinkuja 7, Espoo, P.O. Box 1000, FI-02044 VTT (Finland); Kilpi, Väinö, E-mail: Vaino.Kilpi@picosun.com [Picosun Oy, Tietotie 3, FI-02150 Espoo (Finland); Salo, Erkki, E-mail: Erkki.Salo@vtt.fi [VTT Technical Research Centre of Finland, Biologinkuja 7, Espoo, P.O. Box 1000, FI-02044 VTT (Finland); Li, Wei-Min, E-mail: Wei-Min.Li@picosun.com [Picosun Oy, Tietotie 3, FI-02150 Espoo (Finland); Lindfors, Sven, E-mail: Sven.Lindfors@picosun.com [Picosun Oy, Tietotie 3, FI-02150 Espoo (Finland); Vartiainen, Jari, E-mail: Jari.Vartiainen@vtt.fi [VTT Technical Research Centre of Finland, Biologinkuja 7, Espoo, P.O. Box 1000, FI-02044 VTT (Finland); Kenttä, Eija, E-mail: Eija.Kentta@vtt.fi [VTT Technical Research Centre of Finland, Biologinkuja 7, Espoo, P.O. Box 1000, FI-02044 VTT (Finland); Nikkola, Juha, E-mail: Juha.Nikkola@vtt.fi [VTT Technical Research Centre of Finland, P.O. Box 1300, FI-33101 Tampere (Finland); Harlin, Ali, E-mail: Ali.Harlin@vtt.fi [VTT Technical Research Centre of Finland, Biologinkuja 7, Espoo, P.O. Box 1000, FI-02044 VTT (Finland); Kostamo, Juhana, E-mail: Juhana.Kostamo@picosun.com [Picosun Oy, Tietotie 3, FI-02150 Espoo (Finland)

    2014-01-01

    Thin (30–40 nm) and highly uniform Al{sub 2}O{sub 3} coatings have been deposited at relatively low temperature of 100 °C onto various polymeric materials employing the atomic layer deposition (ALD) technique, both batch and roll-to-roll (R2R) mode. The applications for ALD have long been limited those feasible for batch processing. The work demonstrates that R2R ALD can deposit thin films with properties that are comparable to the film properties fabricated by in batch. This accelerates considerably the commercialization of many products, such as flexible, printed electronics, organic light-emitting diode lighting, third generation thin film photovoltaic devices, high energy density thin film batteries, smart textiles, organic sensors, organic/recyclable packaging materials, and flexible displays, to name a few. - Highlights: • Thin and uniform Al{sub 2}O{sub 3} coatings have been deposited onto polymers materials. • Batch and roll-to-roll (R2R) atomic layer deposition (ALD) have been employed. • Deposition with either process improved the barrier properties. • Sensitivity of coated films to defects affects barrier obtained with R2R ALD.

  13. Diffuse Reflectance Infrared Fourier Transform Study of NOx Adsorption on CGO10 Impregnated with K2O or BaO

    DEFF Research Database (Denmark)

    Traulsen, Marie Lund; Härelind Ingelsten, H.; Kammer Hansen, Kent

    2012-01-01

    In the present work Diffuse Reflectance Infrared Fourier Transform (DRIFT) spectroscopy is applied to study the adsorption of NOx at 300-500 °C in different atmospheres on gadolinium doped ceria (CGO), an important material in electrodes investigated for electrochemical NOx removal. Furthermore......, the effect on the NOx adsorption when adding K2O or BaO to the CGO is investigated. The DRIFT study shows mainly the presence of nitrate species at 500 °C, while at lower temperature a diversity of adsorbed NOx species exists on the CGO. Presence of O2 is shown to have a strong effect on the adsorption of NO......, but no effect on the adsorption of NO2. Addition of K2O and BaO dramatically affects the NOx adsorption and the results also show that the adsorbed NOx species are mobile and capable of changing adsorption state in the investigated temperature range....

  14. Schottky barrier detection devices having a 4H-SiC n-type epitaxial layer

    Science.gov (United States)

    Mandal, Krishna C.; Terry, J. Russell

    2016-12-06

    A detection device, along with methods of its manufacture and use, is provided. The detection device can include: a SiC substrate defining a substrate surface cut from planar to about 12.degree.; a buffer epitaxial layer on the substrate surface; a n-type epitaxial layer on the buffer epitaxial layer; and a top contact on the n-type epitaxial layer. The buffer epitaxial layer can include a n-type 4H--SiC epitaxial layer doped at a concentration of about 1.times.10.sup.15 cm.sup.-3 to about 5.times.10.sup.18 cm.sup.-3 with nitrogen, boron, aluminum, or a mixture thereof. The n-type epitaxial layer can include a n-type 4H--SiC epitaxial layer doped at a concentration of about 1.times.10.sup.13 cm.sup.-3 to about 5.times.10.sup.15 cm.sup.-3 with nitrogen. The top contact can have a thickness of about 8 nm to about 15 nm.

  15. CdTe nBn photodetectors with ZnTe barrier layer grown on InSb substrates

    Science.gov (United States)

    He, Zhao-Yu; Campbell, Calli M.; Lassise, Maxwell B.; Lin, Zhi-Yuan; Becker, Jacob J.; Zhao, Yuan; Boccard, Mathieu; Holman, Zachary; Zhang, Yong-Hang

    2016-09-01

    We have demonstrated an 820 nm cutoff CdTe nBn photodetector with ZnTe barrier layer grown on an InSb substrate. At room temperature, under a bias of -0.1 V, the photodetector shows Johnson and shot noise limited specific detectivity (D*) of 3 × 1013 cm Hz1/2/W at a wavelength of 800 nm and 2 × 1012 cm Hz1/2/W at 200 nm. The D* is optimized by using a top contact design of ITO/undoped-CdTe. This device not only possesses nBn advantageous characteristics, such as generation-recombination dark current suppression and voltage-bias-addressed two-color photodetection, but also offers features including responsivity enhancements by deep-depletion and by using a heterostructure ZnTe barrier layer. In addition, this device provides a platform to study nBn device physics at room temperature, which will help us to understand more sophisticated properties of infrared nBn photodetectors that may possess a large band-to-band tunneling current at a high voltage bias, because this current is greatly suppressed in the large-bandgap CdTe nBn photodetector.

  16. Mg doping of InGaN layers grown by PA-MBE for the fabrication of Schottky barrier photodiodes

    Energy Technology Data Exchange (ETDEWEB)

    Pereiro, J; Redondo-Cubero, A; Fernandez-Garrido, S; Rivera, C; Navarro, A; Munoz, E; Calleja, E [Instituto de Sistemas Optoelectronicos y MicrotecnologIa, Universidad Politecnica de Madrid, E-28040 Madrid (Spain); Gago, R, E-mail: jpereiro@die.upm.e [Instituto de Ciencia de Materiales de Madrid, Consejo Superior de Investigaciones CientIficas, E-28049 Madrid (Spain)

    2010-08-25

    This work reports on the fabrication of Schottky barrier based Mg-doped (In,Ga)N layers for fluorescence applications. Mg acceptors are used in order to compensate surface and bulk donors that prevent the fabrication of Schottky contacts on unintentionally doped (In,Ga)N layers grown by plasma-assisted molecular beam epitaxy (PA-MBE). Rectifying properties of the contacts exhibited a major improvement when (In,Ga)N : Mg was used. The electrical and optical measurements of the layers showed a hole concentration of up to 3 x 10{sup 19} holes cm{sup -3} with a Mg acceptor activation energy of {approx}60 meV. Back-illuminated photodiodes fabricated on 800 nm thick Mg-doped In{sub 0.18}Ga{sub 0.82}N layers exhibited a band pass photo-response with a rejection ratio >10{sup 2} between 420 and 470 nm and peak responsivities of 87 mA W{sup -1} at {approx}470 nm. The suitability of these photodiodes for fluorescence measurements was demonstrated.

  17. Influence of Temperature on Typical Texture Distribution in Primary Recrystallization Matrix of 3% Si CGO Silicon Steel

    Directory of Open Access Journals (Sweden)

    Zhi-chao Li

    2016-01-01

    Full Text Available OM (optical microscopy and EBSD (electron backscatter diffraction techniques were used to study microstructure and texture distribution during primary recrystallization under different intermediate annealing temperatures in CGO silicon steels. The effect of intermediate annealing temperature on texture distribution in 3% Si electrical steel was analyzed. The results indicate that the microstructure in primary recrystallization matrix of CGO silicon steel is comprised of equiaxed ferrite grains. Mean grain size of primary recrystallization increases with the rising of intermediate annealing temperature. γ-fiber texture is the dominant component in primary recrystallization matrix. With higher intermediate annealing temperature, 111121 texture and 111110 texture increase and 111121 texture is stronger than 111110 texture. Goss texture was observed to be decreased firstly and then increased. The content of high angle grain boundaries in primary recrystallization matrix are affected by intermediate annealing temperature. When intermediate annealing temperature is increased, high angle grain boundaries are increased firstly and then decreased. Misorientation distribution in primary recrystallized matrix is affected by primary recrystallization annealing temperature either. The content of high angle grain boundaries are increased owing to higher primary recrystallization annealing temperature, which can be a benefit to the abnormal growth of Goss grains in secondary recrystallization.

  18. On the optimization of asymmetric barrier layers in InAlGaAs/AlGaAs laser heterostructures on GaAs substrates

    DEFF Research Database (Denmark)

    Zhukov, A. E.; Asryan, L. V.; Semenova, Elizaveta;

    2015-01-01

    Band offsets at the heterointerface are calculated for various combinations of InAlGaAs/AlGaAs heteropairs that can be synthesized on GaAs substrates in the layer-by-layer pseudomorphic growth mode. Patterns which make it possible to obtain an asymmetric barrier layer providing the almost obstruc...... for the critical thickness of the indium-containing quaternary solid solution....

  19. Diffusion barrier property of MnSi{sub x}O{sub y} layer formed by chemical vapor deposition for Cu advanced interconnect application

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Mai Phuong, E-mail: nmphuong46@gmail.com; Sutou, Yuji; Koike, Junichi, E-mail: koikej@material.tohoku.ac.jp

    2015-04-01

    An amorphous manganese oxide layers formed by chemical vapor deposition have been studied as a copper diffusion barrier. The thermal stability of the barrier layer was assessed by annealing Cu/MnSi{sub x}O{sub y}/SiO{sub 2}/Si samples at 400 °C for various times up to 10 h. Transmission electron microscopy, energy-dispersive X-ray spectroscopy (EDX), secondary ion mass spectroscopy (SIMS), capacitance-voltage and current–voltage measurements were performed. Failure of the barrier property is marked by observing the copper peak appearing in EDX and SIMS spectra data from the SiO{sub 2} region. Amorphous MnSi{sub x}O{sub y} barrier with a thickness of 1.2 nm has failed in preventing Cu diffusion into SiO{sub 2} substrate after anneal at 400°C in vacuum for 1h, as proven by the presence of Cu in the dielectric (SiO{sub 2}) layer. However, the amorphous MnSi{sub x}O{sub y} with the thickness of 2.0 nm barrier was thermally stable and could prevent Cu from inter-diffusion to the SiO{sub 2} substrate after annealing at 400 °C even up to 10 h. - Highlights: • Amorphous manganese silicate layer has been studied as a copper diffusion barrier. • The 1.2 nm-thick Mn oxide layer is too thin to become a diffusion barrier. • Good thermal stability of 2.0 nm-thick manganese silicate layer.

  20. Evaluation of a barrier to inhibit lesser mealworm (Coleoptera: Tenebrionidae) and dermestidae movement in high-rise, caged-layer poultry facilities.

    Science.gov (United States)

    Kaufman, Phillip E; Reasor, Colleen; Murray, Kathleen D; Waldron, J Keith; Rutz, Donald A

    2005-10-01

    An evaluation of a mechanical barrier to prevent movement of adult and larval lesser mealworm, Alphitobius diaperinus (Panzer); larder beetle, Dermestes lardarius L.; and hide beetle, Dermestes maculatus De Geer was conducted in caged-layer poultry facilities in New York and Maine. The barrier, a plastic collar wrapped around building support posts, proved highly effective at preventing movement of adult lesser mealworms. Significantly more lesser mealworm larvae were recovered from cardboard collar beetle traps placed below both washed and unwashed barriers than from traps placed above washed and unwashed barriers. Similarly, significantly more adult Dermestes were recovered from traps placed below washed barriers than from above both washed and unwashed barriers. The level of fly specking on the barrier was found to have no significant impact on the numbers of adult lesser mealworms and adult and larval Dermestes recovered either above or below barriers. Fly specking level did significantly impact the numbers of lesser mealworm larvae recovered above the barrier. Although washed barriers provided the greatest deterrent to adult lesser mealworms, the presence of the barrier, regardless of the level of fly specking, provided a significant deterrent to beetle climbing success. Washed barriers further reduced climbing success by lesser mealworm larvae by 17%, Dermestes adults by 7-28%, and Dermestes larvae by 33-38%. The high level of climbing observed by adult lesser mealworms suggests that the impact of adult beetle movement toward birds should be considered in its importance in building damage, disease transmission, feed infestation, and bird productivity and health. Observations on cost and maintenance of the barrier are discussed.

  1. Growth and properties of LPCVD W-Si-N barrier layers

    NARCIS (Netherlands)

    Bystrova, S.; Holleman, J.; Woerlee, P.H.

    2001-01-01

    In this work the low-temperature low pressure chemical vapour deposition (LPCVD) of W�Si�N compounds in the WF6�NF3�SiH4�Ar system is presented. Layers were deposited on oxidised Si-wafers at 385 and 250

  2. Plasma-Assisted ALD of an Al2O3 Permeation Barrier Layer on Plastic

    Institute of Scientific and Technical Information of China (English)

    雷雯雯; 李兴存; 陈强; 王正铎

    2012-01-01

    Atomic layer deposition (ALD) technique is used in the preparation of organic/inorganic layers, which requires uniform surfaces with their thickness down to several nanometers. For film with such thickness, the growth mode defined as the arrangement of clusters on the surface during the growth is of significance. In this work, Al2O3 thin film was deposited on various interfacial species of pre-treated polyethylene terephthalate (PET, 12 μm) by plasma assisted atomic layer deposition (PA-ALD), where trimethyl aluminium was used as the Al precursor and O2 as the oxygen source. The interracial species, -NH3, -OH, and -COOH as well as SiCHO (derived from monomer of HMDSO plasma), were grafted previously by plasma and chemical treatments. The growth mode of PA-ALD Al2O3 was then investigated in detail by combining results from in-situ diagnosis of spectroscopic ellipsometry (SE) and ex-situ characterization of as-deposited layers from the morphologies scanned by atomic force microscopy (AFM). In addition, the oxygen transmission rates (OTR) of the original and treated plastic films were measured. The possible reasons for the dependence of the OTR values on the surface species were explored.

  3. Thermoelastic characteristics of thermal barrier coatings with layer thickness and edge conditions through mathematical analysis.

    Science.gov (United States)

    Go, Jaegwi; Myoung, Sang-Won; Lee, Je-Hyun; Jung, Yeon-Gil; Kim, Seokchan; Paik, Ungyu

    2014-10-01

    The thermoelastic behaviors of such as temperature distribution, displacements, and stresses in thermal barrier coatings (TBCs) are seriously influenced by top coat thickness and edge conditions, which were investigated based on the thermal and mechanical properties of plasma-sprayed TBCs. A couple of governing partial differential equations were derived based on the thermoelastic theory. Since the governing equations are too involved to solve analytically, a finite volume method was developed to obtain approximations. The thermoelastic characteristics of TBCs with the various thicknesses and microstructures were estimated through mathematical approaches with different edge conditions. The results demonstrated that the top coat thickness and the edge condition in theoretical analysis are crucial factors to be considered in controlling the thermoelastic characteristics of plasma-sprayed TBCs.

  4. Nanometer-thick amorphous-SnO2 layer as an oxygen barrier coated on a transparent AZO electrode

    Science.gov (United States)

    Lee, Hee Sang; Woo, Seong Ihl

    2016-07-01

    It is necessary for transparent conducting electrodes used in dye-sensitized or perovskite solar cells to have high thermal stability which is required when TiO2 is coated on the electrode. AZO films with their low-cost and good TCO properties are unfortunately unstable above 300 °C in air because of adsorbed oxygen. In this paper, the thermal stability of AZO films is enhanced by depositing an oxygen barrier on AZO films to block the oxygen. As the barrier material, SnO2 is used due to its high heat stability, electrical conductivity, and transmittance. Moreover, when the SnO2 is grown as amorphous phase, the protective effect become greater than the crystalline phase. The thermal stability of the amorphous-SnO2/AZO films varies depending on the thickness of the amorphous SnO2 layer. Because of the outstanding oxygen blocking properties of amorphous SnO2, its optimal thickness is very thin and it results in only a slight decrease in transmittance. The sheet resistance of the amorphous-SnO2/AZO film is 5.4 Ω sq-1 after heat treatment at 500 °C for 30 min in air and the average transmittance in the visible region is 83.4%. The results show that the amorphous-SnO2/AZO films have thermal stability with excellent electrical and optical properties. [Figure not available: see fulltext.

  5. Schottky barrier detectors on 4H-SiC n-type epitaxial layer for alpha particles

    Energy Technology Data Exchange (ETDEWEB)

    Chaudhuri, S.K.; Krishna, R.M.; Zavalla, K.J. [Department of Electrical Engineering, University of South Carolina, Columbia, SC 29208 (United States); Mandal, K.C., E-mail: mandalk@cec.sc.edu [Department of Electrical Engineering, University of South Carolina, Columbia, SC 29208 (United States)

    2013-02-11

    Schottky barrier detectors have been fabricated on 50 μm n-type 4H-SiC epitaxial layers grown on 360 μm SiC substrates by depositing ∼10 nm nickel contact. Current–voltage (I–V) and capacitance–voltage (C–V) measurements were carried out to investigate the Schottky barrier properties. The detectors were evaluated for alpha particle detection using a {sup 241}Am alpha source. An energy resolution of ∼2.7% was obtained with a reverse bias of 100 V for 5.48 MeV alpha particles. The measured charge collection efficiency (CCE) was seen to vary as a function of bias voltage following a minority carrier diffusion model. Using this model, a diffusion length of∼3.5 μm for holes was numerically calculated from the CCE vs. bias voltage plot. Rise-time measurements of digitally recorded charge pulses for the 5.48 MeV alpha particles showed a presence of two sets of events having different rise-times at a higher bias of 200 V. A biparametric correlation scheme was successfully implemented for the first time to visualize the correlated pulse-height distribution of the events with different rise-times. Using the rise-time measurements and the biparametric plots, the observed variation of energy resolution with applied bias was explained.

  6. Enhancing rectification of a nano-swimmer system by multi-layered asymmetric barriers.

    Science.gov (United States)

    Chen, Yen-Fu; Xiao, Song; Chen, Hsuan-Yi; Sheng, Yu-Jane; Tsao, Heng-Kwong

    2015-10-21

    The rectification of nano-swimmers in two chambers separated by a strip of funnel gates is explored by dissipative particle dynamics simulations. According to the trajectories of active colloids across the funnel zone, two rectification mechanisms are identified: geometry-assisted diffusion and trap-hindered diffusion. In general, geometry-assisted diffusion dominates at a small active force (Fa) and run time (τ) while trap-hindered diffusion governs at a large Fa and τ. The rectification ratio is affected by the funnel shape and various geometries are considered: open/closed triangular, circular and rectangular funnels. The rectification ratio of open funnels is always greater than that of closed funnels. Moreover, the open circular funnel has the best performance while the triangular one has the worst. Rectification can be enhanced as the number of funnel layers is increased. It is found that the rectification ratio of self-propelled colloids can be dramatically augmented by triple-layered funnels to be as high as 30. Our simulation study offers an efficient approach for rectification enhancement.

  7. The mucus layer is critical in protecting against ischemia-reperfusion-mediated gut injury and in the restitution of gut barrier function.

    Science.gov (United States)

    Qin, Xiaofa; Sheth, Sharvil U; Sharpe, Susan M; Dong, Wei; Lu, Qi; Xu, Dazhong; Deitch, Edwin A

    2011-03-01

    It is well documented that the gut injury plays a critical role in the development of systemic inflammation and distant organ injury in conditions associated with splanchnic ischemia. Consequently, understanding the mechanisms leading to gut injury is important. In this context, recent work suggests a protective role for the intestinal mucus layer and an injury-inducing role for luminal pancreatic proteases. Thus, we explored the role of the mucus layer in gut barrier function by observing how the removal of the mucus layer affects ischemia-reperfusion-mediated gut injury in rats as well as the potential role of luminal pancreatic proteases in the pathogenesis of gut injury. Ischemia was induced by the ligation of blood vessels to segments of the ileum for 45 min, followed by up to 3 h of reperfusion. The ileal segments were divided into five groups. These included a nonischemic control, ischemic segments exposed to saline, the mucolytic N-acetylcysteine (NAC), pancreatic proteases, or NAC + pancreatic proteases. Changes in gut barrier function were assessed by the permeation of fluorescein isothiocyanate dextran (molecular weight, 4,000 d) in ileal everted sacs. Gut injury was measured morphologically and by the luminal content of protein, DNA, and hemoglobin. The mucus layer was assessed functionally by measuring its hydrophobicity and morphologically. Gut barrier function was promptly and effectively reestablished during reperfusion, which was accompanied by the restoration of the mucus layer. In contrast, treatment of the gut with the mucolytic NAC for 10 min during ischemia resulted in a failure of mucus restitution and further increases in gut permeability and injury. The presence of digestive proteases by themselves did not exacerbate gut injury, but in combination with NAC, they caused an even greater increase in gut injury and permeability. These results suggest that the mucus layer not only serves as a barrier between the luminal contents and gut surface

  8. Performance Improvement of GaN Based Schottky Barrier Ultraviolet Photodetector by Adding a Thin AlGaN Window Layer

    Institute of Scientific and Technical Information of China (English)

    ZHOU Mei; ZHAO De-Gang

    2007-01-01

    We propose a new structure of GaN based Schottky barrier ultraviolet photodetector, in which a thin n-type AlGaN window layer is added on the conventional n--GaN/n+-GaN device structure. The performance of the Schottky barrier ultraviolet photodetector is found to be improved by the new structure. The simulation result shows that the new structure can reduce the negative effect of surface states on the performance of Schottky barrier GaN photodetectors, improving the quantum efficiency and decreasing the dark current. The investigations suggest that the new photodetector can exhibit a better responsivity by choosing a suitably high carrier concentration and thin thickness for the AlGaN window layer.

  9. Photovoltaic performance of bithiazole-bridged dyes-sensitized solar cells employing semiconducting quantum dot CuInS2 as barrier layer material.

    Science.gov (United States)

    Guo, Fuling; He, Jinxiang; Li, Jing; Wu, Wenjun; Hang, Yandi; Hua, Jianli

    2013-10-15

    In this work, the quantum dot CuInS2 layer was deposited on TiO2 film using successive ionic layer absorption and reaction (SILAR) method, and then two bithiazole-bridged dyes (BTF and BTB) were sensitized on the CuInS2/TiO2 films to form dye/CuInS2/TiO2 photoanodes for DSSCs. It was found that the quantum dots CuInS2 as an energy barrier layer not only could effectively improve open-circuit voltage (Voc) of solar cell, but also increase short-circuit photocurrent (Jsc) compared to the large decrease in Jsc of ZnO as energy barrier layer. The electrochemical impedance spectroscopy (EIS) measurement showed that the CuInS2 formed a barrier layer to suppress the recombination from injection electron to the electrolyte and improve open-circuit voltage. Finally, the open-circuit voltage increased about 22 and 27mV for BTF and BTB-/CuInS2/TiO2-based cells, the overall conversion efficiencies also reached to 7.20% and 6.74%, respectively.

  10. Enhanced water vapor barrier properties for biopolymer films by polyelectrolyte multilayer and atomic layer deposited Al{sub 2}O{sub 3} double-coating

    Energy Technology Data Exchange (ETDEWEB)

    Hirvikorpi, Terhi [VTT Technical Research Centre of Finland, Biologinkuja 7, Espoo, P.O. Box 1000, FI-02044 VTT (Finland); Vaehae-Nissi, Mika, E-mail: mika.vaha-nissi@vtt.fi [VTT Technical Research Centre of Finland, Biologinkuja 7, Espoo, P.O. Box 1000, FI-02044 VTT (Finland); Harlin, Ali [VTT Technical Research Centre of Finland, Biologinkuja 7, Espoo, P.O. Box 1000, FI-02044 VTT (Finland); Salomaeki, Mikko [University of Turku, Department of Chemistry, Laboratory of Materials Chemistry and Chemical Analysis, Vatselankatu 2, FI-20014 (Finland); Areva, Sami [Tampere University of Technology, Department of Biomedical Engineering, Biokatu 6, P.O. Box 692, FI-33101 Tampere (Finland); Korhonen, Juuso T. [Aalto University School of Science, Department of Applied Physics, P.O. Box 15100 FI-00076 AALTO, Espoo (Finland); Karppinen, Maarit [Aalto University School of Chemical Technology, Laboratory of Inorganic Chemistry, P.O. Box 16100, FI-00076 AALTO, Espoo (Finland)

    2011-09-01

    Commercial polylactide (PLA) films are coated with a thin (20 nm) non-toxic polyelectrolyte multilayer (PEM) film made from sodium alginate and chitosan and additionally with a 25-nm thick atomic layer deposited (ALD) Al{sub 2}O{sub 3} layer. The double-coating of PEM + Al{sub 2}O{sub 3} is found to significantly enhance the water vapor barrier properties of the PLA film. The improvement is essentially larger compared with the case the PLA film being just coated with an ALD-grown Al{sub 2}O{sub 3} layer. The enhanced water vapor barrier characteristics of the PEM + Al{sub 2}O{sub 3} double-coated PLA films are attributed to the increased hydrophobicity of the surface of these films.

  11. Seasonal variations in the barrier layer in the South China Sea: characteristics, mechanisms and impact of warming

    Science.gov (United States)

    Zeng, Lili; Wang, Dongxiao

    2016-06-01

    A new observational dataset, the South China Sea Physical Oceanographic Dataset 2014, is examined to investigate the seasonal characteristics, formation mechanisms, and warming effects of the barrier layer (BL) in the South China Sea (SCS). Statistical analysis reveals that the BL is thicker and occurs more frequently during summer and early autumn, while in winter it often coexists with temperature inversions. The formation mechanisms are discussed from the perspective of the controlling regime and the net turbulent energy required for BL evolution. In the initial stage (March-May), the BL is absent due to weak mixing, scarce rainfall and surface warming. In the formation and maintenance stage (June-September), the BL grows in summer and persists into the transition season. The BLs can be classified into three regimes: the flux regime (in the Luzon Strait), the combined regime (in the eastern basin) and the wind regime (southeast of Vietnam). In the attenuation stage (October-February), associated with the winter monsoon, the BL mainly occurs in the combined regime (along the path of western boundary current) and the flux regime (in the southeast corner). The characteristics and generation mechanisms of the temperature inversions near the south Chinese coast, east of Vietnam, and in the Gulf of Thailand are also discussed. Our analysis further demonstrates that the BL has a significant warming effect on upper ocean temperature and heat content in the SCS.

  12. Understanding and Shaping the Morphology of the Barrier Layer of Supported Porous Anodized Alumina on Gold Underlayers.

    Science.gov (United States)

    Berger, Nele; Es-Souni, Mohammed

    2016-07-12

    Large-area ordered nanorod (NR) arrays of various functional materials can be easily and cost-effectively processed using on-substrate anodized porous aluminum oxide (PAO) films as templates. However, reproducibility in the processing of PAO films is still an issue because they are prone to delamination, and control of fabrication parameters such as electrolyte type and concentration and anodizing time is critical for making robust templates and subsequently mechanically reliable NR arrays. In the present work, we systematically investigate the effects of the fabrication parameters on pore base morphology, devise a method to avoid delamination, and control void formation under the barrier layer of PAO films on gold underlayers. Via systematic control of the anodization parameters, particularly the anodization current density and time, we follow the different stages of void development and discuss their formation mechanisms. The practical aspect of this work demonstrates how void size can be controlled and how void formation can be utilized to control the shape of NR bases for improving the mechanical stability of the NRs.

  13. Hot Corrosion Behavior of Double-ceramic-layer LaTi2Al9O19/YSZ Thermal Barrier Coatings

    Institute of Scientific and Technical Information of China (English)

    XIE Xiaoyun; GUO Hongbo; GONG Shengkai; XU Huibin

    2012-01-01

    LaTi2Al9O19 (LTA) exhibits promising potential as a new kind of thermal barrier coating (TBC) material,due to its excellent high-temperature capability and low thermal conductivity.In this paper,LTA/yttria stabilized zirconia (YSZ) TBCs are produccd by atmospheric plasma spraying.Hot corrosion behavior and the related failure mechanism of the coating are investigated.Decomposition of LTA does not occur even after 1 458 hot corrosion cycles at 1 373 K,revealing good chemical stability in molten salt of Na2SO4 and NaCl.However,the molten salt infiltrates to the bond coat,causing dissolving of the thermally grown oxide (TGO) in the molten salt and hot corrosion of the bond coat.As a result,cracking of the TBC occurs within the oxide layer.In conclusion,the ceranic materials LTA and YSZ reveal good chemical stability in molten salts of Na2SO4 and NaCl,and the bond coat plays a significant role in providing protection for the component against hot corrosion in the LTA/YSZ TBCs.LTA exhibits very promising potential as a novel TBC material.

  14. The importance of dye chemistry and TiCl4 surface treatment in the behavior of Al2O3 recombination barrier layers deposited by atomic layer deposition in solid-state dye-sensitized solar cells

    KAUST Repository

    Brennan, Thomas P.

    2012-01-01

    Atomic layer deposition (ALD) was used to fabricate Al 2O 3 recombination barriers in solid-state dye-sensitized solar cells (ss-DSSCs) employing an organic hole transport material (HTM) for the first time. Al 2O 3 recombination barriers of varying thickness were incorporated into efficient ss-DSSCs utilizing the Z907 dye adsorbed onto a 2 μm-thick nanoporous TiO 2 active layer and the HTM spiro-OMeTAD. The impact of Al 2O 3 barriers was also studied in devices employing different dyes, with increased active layer thicknesses, and with substrates that did not undergo the TiCl 4 surface treatment. In all instances, electron lifetimes (as determined by transient photovoltage measurements) increased and dark current was suppressed after Al 2O 3 deposition. However, only when the TiCl 4 treatment was eliminated did device efficiency increase; in all other instances efficiency decreased due to a drop in short-circuit current. These results are attributed in the former case to the similar effects of Al 2O 3 ALD and the TiCl 4 surface treatment whereas the insulating properties of Al 2O 3 hinder charge injection and lead to current loss in TiCl 4-treated devices. The impact of Al 2O 3 barrier layers was unaffected by doubling the active layer thickness or using an alternative ruthenium dye, but a metal-free donor-π-acceptor dye exhibited a much smaller decrease in current due to its higher excited state energy. We develop a model employing prior research on Al 2O 3 growth and dye kinetics that successfully predicts the reduction in device current as a function of ALD cycles and is extendable to different dye-barrier systems. © This journal is the Owner Societies 2012.

  15. Yttria-stabilized zirkonia / gadolinium zirconate double-layer plasma-sprayed thermal barrier coating systems (TBCs)

    Energy Technology Data Exchange (ETDEWEB)

    Bakan, Emine

    2015-07-01

    Thermal barrier coating (TBC) research and development is driven by the desirability of further increasing the maximum inlet temperature in a gas turbine engine. A number of new top coat ceramic materials have been proposed during the last decades due to limited temperature capability (1200 C) of the state-of-the-art yttria-stabilized zirconia (7 wt. % Y{sub 2}O{sub 3}-ZrO{sub 2}, YSZ) at long term operation. Zirconate pyrochlores of the large lanthanides((Gd → La){sub 2}Zr{sub 2}O{sub 7}) have been particularly attractive due to their higher temperature phase stability than that of the YSZ. Nonetheless, the issues related with the implementation of pyrochlores such as low fracture toughness and formation of deleterious interphases with thermally grown oxide (TGO, Al{sub 2}O{sub 3}) were reported. The implication was the requirement of an interlayer between the pyrochlores and TGO, which introduced double-layer systems to the TBC literature. Furthermore, processability issues of pyrochlores associated with the different evaporation rates of lanthanide oxides and zirconia resulting in unfavorable composition variations in the coatings were addressed in different studies. After all, although the material properties are available, there is a paucity of data in the literature concerning the properties of the coatings made of pyrochlores. From the processability point of view the most reported pyrochlore is La{sub 2}Zr{sub 2}O{sub 7}. Hence, the goal of this research was to investigate plasma-sprayed Gd{sub 2}Zr{sub 2}O{sub 7} (GZO) coatings and YSZ/GZO double-layer TBC systems. Three main topics were examined based on processing, performance and properties: (i) the plasma spray processing of the GZO and its impact on the microstructural and compositional properties of the GZO coatings; (ii) the cycling lifetime of the YSZ/GZO double-layer systems under thermal gradient at a surface temperature of 1400 C; (iii) the properties of the GZO and YSZ coatings such as

  16. Damage-free back channel wet-etch process in amorphous indium-zinc-oxide thin-film transistors using a carbon-nanofilm barrier layer.

    Science.gov (United States)

    Luo, Dongxiang; Zhao, Mingjie; Xu, Miao; Li, Min; Chen, Zikai; Wang, Lang; Zou, Jianhua; Tao, Hong; Wang, Lei; Peng, Junbiao

    2014-07-23

    Amorphous indium-zinc-oxide thin film transistors (IZO-TFTs) with damage-free back channel wet-etch (BCE) process were investigated. A carbon (C) nanofilm was inserted into the interface between IZO layer and source/drain (S/D) electrodes as a barrier layer. Transmittance electron microscope images revealed that the 3 nm-thick C nanofilm exhibited a good corrosion resistance to a commonly used H3PO4-based etchant and could be easily eliminated. The TFT device with a 3 nm-thick C barrier layer showed a saturated field effect mobility of 14.4 cm(2) V(-1) s(-1), a subthreshold swing of 0.21 V/decade, an on-to-off current ratio of 8.3 × 10(10), and a threshold voltage of 2.0 V. The favorable electrical performance of this kind of IZO-TFTs was due to the protection of the inserted C to IZO layer in the back-channel-etch process. Moreover, the low contact resistance of the devices was proved to be due to the graphitization of the C nanofilms after annealing. In addition, the hysteresis and thermal stress testing confirmed that the usage of C barrier nanofilms is an effective method to fabricate the damage-free BCE-type devices with high reliability.

  17. [ACTIVITY OF ANTIMICROBIAL NANOSTRUCTURED BARRIER LAYERS BASED ON POLYETHYLENETEREPHTHALATE IN RELATION TO CLINICAL STRAINES OF MICROORGANISMS FOR SICK PERSONS OF GASTROENTEROLOGICAL PROFILE].

    Science.gov (United States)

    Elinson, V M; Rusanova, E V; Vasilenko, I A; Lyamin, A N; Kostyuchenko, L N

    2015-01-01

    Homeostasis transgressions of enteral medium including disbiotic ones are often accompanying deseases of digestive tract. Espessially it touches upon sick persons connected with probe nourishing. One of the way for solving this problem is normalization of digestion microflore by means of wares with nanotechnological modifications of walls (probes, stomic tubes) which provide them antimicrobial properties and assist to normalization of digestive microbiotis and enteral homeostasis completely. The aim to study is research of antimicrobial activity of of nanostructured barrier layers based on polyethyleneterephthalate (PET) in relation to clinical straines of microorganisms. For barrier layer creation the approach on the base of methods of ion-plasma technology was used including ion-plasma treatment (nanostructuring) of the surface by ions noble and chemically active gases and following formation nanodimensional carbon films on the surface/ For the study of antimicrobial activity in relation to clinical straines of microorganisms we used the technique which allowed to establish the influence of parting degree of microorganisms suspension and time for samples exposing and microorganisms adsorbed on the surface. In experiment clinical straines obtained from different materials were used: Staphylococcus Hly+ and Calbicans--from pharyngeal mucosa, E. coli--from feces, K.pneumoniae--from urine. Sharing out and species identification of microorganisms were fulfilled according with legasy documents. In results of the study itwas obtained not only the presence of staticticaly confirmed antimicrobial activity of PET samples with nanostructured barrier layers in relation to different stimulators of nosocomical infections but also the influence of different factors connected with formation of nanostructured layers and consequently based with them physicochemical characteristics such as, in particular, surface energy, surface relief parameters, surface charg and others, as well

  18. Production of a half cell with a LSM/CGO support for electrochemical flue gas purification

    DEFF Research Database (Denmark)

    Andersen, Kjeld Bøhm; Kammer Hansen, Kent

    2013-01-01

    Described herein is the production of a half cell with a strontium-substituted lanthanum manganite/cerium gadolinium oxide support and dense cerium gadolinium oxide electrolyte for electrochemical flue gas purification. The half cells were constructed through tape casting a strontium......-substituted lanthanum manganite/cerium gadolinium oxide support and cerium gadolinium oxide electrolyte. The half cells were produced by laminating the support and electrolyte layers followed by sintering. Perfectly flat half cells were constructed with a porous strontium-substituted lanthanum manganite....../cerium gadolinium oxide support layer and dense cerium gadolinium oxide electrolyte by adjusting sintering shrinkage at the electrolyte layer and altering the sintering aid....

  19. The consequences of air flow on the distribution of aqueous species during dielectric barrier discharge treatment of thin water layers

    Science.gov (United States)

    Tian, Wei; Lietz, Amanda M.; Kushner, Mark J.

    2016-10-01

    The desired outcomes of wet tissue treatment by dielectric barrier discharges (DBDs) strongly depend on the integrated fluences of reactive species incident onto the tissue, which are determined by power, frequency and treatment time. The reactivity produced by such plasmas is often expected to be proportional to treatment time due to the accumulation of radicals in the liquid over the tissue. However, one of the typically uncontrolled parameters in DBD treatment of liquids and tissue is gas flow, which could affect the delivery of plasma produced radicals to the tissue. Gas flow can redistribute long-lived, plasma produced gas phase species prior to solvating in the liquid, while not greatly affecting the solvation of short-lived species. Gas flow can therefore potentially be a control mechanism for tailoring the fluences of reactive species to the tissue. In this paper, we report on a computational investigation of the consequences of gas flow on treatment of liquid layers covering tissue by atmospheric DBDs by up to 100 pulses. We found that gas flow (through residence time of the gas) can control the production of gas phase species requiring many collisions to form, such as reactive nitrogen species (RNS). The resulting solvation of the RNS in turn controls the production of aqueous species such as \\text{NO}\\text{3aq}- and \\text{ONOO}\\text{aq}- (aq denotes an aqueous species). With the exception of O3 and O3aq, reactive oxygen species (ROS) are less sensitive to gas flow, and so OHaq and H2O2aq, are determined primarily by discharge properties.

  20. Analysis of Ta-based Barrier Layer of Cu-interconnect by Second Ion Mass Spectrometry%Cu互连工艺中Ta基扩散阻挡层的二次离子质谱剖析

    Institute of Scientific and Technical Information of China (English)

    曹永明; 方培源; 姜蕾

    2004-01-01

    With the development of deep submicron integrated circuits (IC), copper metallization has been a replacement for conventional aluminum metallization in high density IC manufacture. But Cu is quite mobile in Si and has poor adhesion to Si or SiO2, which could degrade the performance of copper interconnect. Therefore, a diffusion barrier layer between copper interconnect and Si device is necessary. In this paper, Ta-based barrier layers are deposited on Si substrate with deposition technology of magnetron sputtering. The depth profile of copper interconnect and Ta-diffusion barrier layer are investigated by second ion mass spectrometry(SIMS).

  1. Sintering and grain growth kinetics in La0.85Sr0.15MnO3–Ce0.9Gd0.1O1.95 (LSM–CGO) porous composite

    DEFF Research Database (Denmark)

    Ni, De Wei; Andersen, Kjeld Bøhm; Esposito, Vincenzo

    2014-01-01

    The sintering kinetics in La0.85Sr0.15MnO3–Ce0.9Gd0.1O1.95 (LSM–CGO) porous composite was studied by applying a two-stage master sintering curve (MSC) approach and comparing with LSM and CGO single-phase materials. In the two-stage MSC, sintering mechanisms occurring at different stages were...... separated with respect of density, giving a typical apparent activation energy values for each sintering stage of the LSM–CGO system. Compared with the single-phase materials, retardant effect of the different phases on mass diffusion leads to much higher apparent activation energy for densification...

  2. The impact of steam and current density on carbon formation from biomass gasification tar on Ni/YSZ, and Ni/CGO solid oxide fuel cell anodes

    Science.gov (United States)

    Mermelstein, Joshua; Millan, Marcos; Brandon, Nigel

    The combination of solid oxide fuel cells (SOFCs) and biomass gasification has the potential to become an attractive technology for the production of clean renewable energy. However the impact of tars, formed during biomass gasification, on the performance and durability of SOFC anodes has not been well established experimentally. This paper reports an experimental study on the mitigation of carbon formation arising from the exposure of the commonly used Ni/YSZ (yttria stabilized zirconia) and Ni/CGO (gadolinium-doped ceria) SOFC anodes to biomass gasification tars. Carbon formation and cell degradation was reduced through means of steam reforming of the tar over the nickel anode, and partial oxidation of benzene model tar via the transport of oxygen ions to the anode while operating the fuel cell under load. Thermodynamic calculations suggest that a threshold current density of 365 mA cm -2 was required to suppress carbon formation in dry conditions, which was consistent with the results of experiments conducted in this study. The importance of both anode microstructure and composition towards carbon deposition was seen in the comparison of Ni/YSZ and Ni/CGO anodes exposed to the biomass gasification tar. Under steam concentrations greater than the thermodynamic threshold for carbon deposition, Ni/YSZ anodes still exhibited cell degradation, as shown by increased polarization resistances, and carbon formation was seen using SEM imaging. Ni/CGO anodes were found to be more resilient to carbon formation than Ni/YSZ anodes, and displayed increased performance after each subsequent exposure to tar, likely due to continued reforming of condensed tar on the anode.

  3. Electrochemical oxidation of propene by use of LSM15/CGO10 electrochemical reactor

    DEFF Research Database (Denmark)

    Ippolito, Davide; Andersen, Kjeld Bøhm; Kammer Hansen, Kent

    2012-01-01

    The propene catalytic oxidation was studied over an 11-layers porous electrochemical reactor made by La0.85Sr0.15MnO3 and Ce0.9Gd0.1O1.95 with the objective to simulate the abatement of exhaust gases emitted from Diesel engines. This work shows the possibility to enhance the catalytic activity...... through infiltration of Ce0.9Gd0.1O1.95 using the porous electrochemical reactor as a catalyst support. The infiltration of an oxygen ion conductor as Ce0.9Gd0.1O1.95 showed an increased activity either at open circuit voltage (OCV) or under polarization with respect to the non infiltrated cell. The use...

  4. Impact of InGaN back barrier layer on performance of AIInN/AlN/GaN MOS-HEMTs

    Science.gov (United States)

    Swain, Sanjit Kumar; Adak, Sarosij; Pati, Sudhansu Kumar; Sarkar, Chandan Kumar

    2016-09-01

    In the present work, we have discussed the effect of InGaN back barrier on device performances of 100 nm gate length AlInN/AlN/GaN metal oxide semiconductor high electron mobility transistor (MOS-HEMT) device and a wide comparison is made with respect to without considering the back barrier layer. The InGaN layer is introduced in the intension to raise the conduction band of GaN buffer with respect to GaN channel so that there is an improvement in the carrier confinement and at the same time witnessed excellent high frequency performance. The simulations are carried out using 2D Sentaurus TCAD simulator using Hydrodynamic mobility model by taking interface traps into consideration. Due to high value of two-dimensional electron gas (2DEG) density and mobility in AlInN/AlN/GaN MOS-HEMT device, higher drain current density is achieved. Simulation are carried out for different device parameters such as transfer characteristic (Id-Vg), transconductance factor (gm), drain induced barrier lowering (DIBL), Subthreshold slope (SS), conduction band energy, transconductance generation factor (gm/Id) and electric field. We have also examined the RF performance such as, total gate capacitance (Cgg), current gain cutoff frequency (fT) and power gain cutoff frequency (fmax) of the proposed devices. Use of InGaN back barrier tends to increase threshold voltage towards more positive value, reduced DIBL, and improves SS and significant growth in (gm/Id) by 5.5%. It also helps to achieve better frequency response like substantial increase in fT up to 91 GHz with current gain 60 dB as compare to 67 GHz with 56 dB for the device without considering back barrier and increase in fmax up to 112 GHz with respect 94 GHz. These results evident that use of InGaN back barrier in such devices can be better solution for future analog and RF applications.

  5. 4.0-nm-thick amorphous Nb–Ni film as a conducting diffusion barrier layer for integrating ferroelectric capacitor on Si

    Energy Technology Data Exchange (ETDEWEB)

    Dai, X.H. [Hebei Key Lab of Optic-electronic Information and Materials, College of Physics Science & Technology, Hebei University, Hebei 071002 (China); College of Electronic and Information Engineering, Hebei University of Technology, Tianjin 300401 (China); Guo, J.X.; Zhang, L.; Jia, D.M.; Qi, C.G.; Zhou, Y.; Li, X.H.; Shi, J.B.; Fu, Y.J.; Wang, Y.L.; Lou, J.Z. [Hebei Key Lab of Optic-electronic Information and Materials, College of Physics Science & Technology, Hebei University, Hebei 071002 (China); Ma, L.X. [Department of Physics, Blinn College, Bryan, TX 77805 (United States); Zhao, H.D. [College of Electronic and Information Engineering, Hebei University of Technology, Tianjin 300401 (China); Liu, B.T., E-mail: btliu@hbu.cn [Hebei Key Lab of Optic-electronic Information and Materials, College of Physics Science & Technology, Hebei University, Hebei 071002 (China)

    2015-10-05

    Highlights: • 4-nm-thick amorphous Nb–Ni film is first used as the conducting barrier layer. • No obvious interdiffusion/reaction can be found from the LSCO/PZT/LSCO/Nb–Ni/Si. • The LSCO/PZT/LSCO capacitor, measured at 5 V, possesses very good properties. • Ultrathin amorphous Nb–Ni film is ideal to fabricate silicon-based FRAM. - Abstract: We have successfully integrated La{sub 0.5}Sr{sub 0.5}CoO{sub 3}/PbZr{sub 0.4}Ti{sub 0.6}O{sub 3}/La{sub 0.5}Sr{sub 0.5}CoO{sub 3} (LSCO/PZT/LSCO) capacitors on silicon substrate using a ∼4.0-nm-thick amorphous Nb–Ni film as the conducting diffusion barrier layer. Transmission electron microscopy technique confirms that the Nb–Ni film is still amorphous after fabrication of the capacitors, and the interfaces related to Nb–Ni are clean and sharp without any findable interdiffusion/reaction. The LSCO/PZT/LSCO capacitor, measured at 5 V, possesses very good properties, such as large remanent polarization of ∼22.1 μC/cm{sup 2}, small coercive voltage of ∼1.27 V, good fatigue-resistance, and small pulse width dependence, implying that ultrathin amorphous Nb–Ni film is ideal as the conducting diffusion barrier layer to fabricate high-density silicon-based ferroelectric random access memories.

  6. Study of the composition of the barrier layer and various mechanisms of adsorption of molecules in tunnel contacts on aluminum base

    Energy Technology Data Exchange (ETDEWEB)

    Shklyarevskii, O.I.; Lysykh, A.A.; Yanson, I.K.

    1978-12-01

    A study has been made of tunnel contacts with an aluminum base electrode. Plasma oxidation of aluminum films at temperatures up to 250/sup 0/C has been shown to result in the formation of an aluminum hydroxide barrier layer. The nature of the adsorption centers on the surface of the thin oxide films on aluminum has been determined. Qualitative analysis of the intensity of bands in the tunnel spectrum of symmetric molecules indicates a change in the symmetry of the molecules, apparently occurring under the effect of the internal field of the junction.

  7. Tailoring morphology in free-standing anodic aluminium oxide: control of barrier layer opening down to the sub-10 nm diameter.

    Science.gov (United States)

    Gong, Jie; Butler, William H; Zangari, Giovanni

    2010-05-01

    Free-standing, highly ordered porous aluminium oxide templates were fabricated by three-step anodization in oxalic, sulfuric or phosphoric acid solutions, followed by dissolution of the aluminium substrate in HgCl(2). Opening of the pore bottoms on the barrier layer side of these templates was carried out by using chemical or ion beam etching. Chemical etching is capable of achieving full pore opening, but partial pore opening occurs inhomogeneously. On the contrary, ion beam etching enables homogeneous and reproducible partial pore opening, with the pore size controlled through the etching time. By this method, pore openings as small as 5 nm can reliably be obtained.

  8. Improved Voltage and Fill Factor by Using Zinc Oxide Thin Film as a Barrier Layer in Dye-Sensitized Solar Cells

    Institute of Scientific and Technical Information of China (English)

    WANG Peng; WANG Li-Duo; LI Bin; QIU Yong

    2005-01-01

    @@ A series of dye-sensitized solar cells based on ZnO-modified TiO2 nano-porous films have been prepared. The current-voltage characteristics of the cells show that the ZnO-modification can improve the open-circuit voltage and the fill factor but can decrease the short-circuit current. Dark current and transient photovoltage measurements are used to study the back reaction. It is indicated that the recombination process is suppressed by blocking the hole transporting from the nano-porous TiO2 since the surface of the semiconductor is almost fully covered with ZnO as a barrier layer.

  9. Improved characteristics of ultraviolet AlGaN multiple-quantum-well laser diodes with step-graded quantum barriers close to waveguide layers

    Science.gov (United States)

    Cai, Xuefen; Li, Shuping; Kang, Junyong

    2016-09-01

    Ultraviolet AlGaN multiple-quantum-well laser diodes (LDs) with step-graded quantum barriers (QBs) instead of conventional first and last QBs close to waveguide layers are proposed. The characteristics of this type of laser diodes are numerically investigated by using the software PICS3D and it is found that the performances of these LDs are greatly improved. The results indicates that the structure with step-graded QBs exhibits higher output light power, slope efficiency and emission intensity, as well as lower series resistance and threshold current density under the identical condition, compared with conventional LD structure.

  10. Effect of InAlGaAs and GaAs combination barrier thickness on the duration of dot formation in different layers of stacked InAs/GaAs quantum dot heterostructure grown by MBE.

    Science.gov (United States)

    Halder, N; Suseendran, J; Chakrabarti, S; Herrera, Miriam; Bonds, Marta; Browning, Nigel D

    2010-08-01

    Multilayer stacks of quantum dots (QDs) (10 periods) with a combination barrier layer of In0.21Al0.21 Ga0.58As (30 angstroms) and GaAs (70-180 angstroms) are grown by solid source molecular beam epitaxy (MBE) and reflection high-energy electron diffraction (RHEED) has been used for the in situ determination of the duration of dot formation in the QD layers. The increase in the duration of dot formation in the consecutive layers of the QD heterostructure with thinner barrier is attributed to the indium migration towards the defects in the strained QD layers. A thicker GaAs layer at 590 degrees C overgrown on the InAlGaAs is believed to remove the unevenness of the growth front for the subsequent QD layer resulting in good vertical stacking of islands till the final layer of the multilayer heterostructures.

  11. Pulsed laser deposition of gadolinia doped ceria layers at moderate temperature – a seeding approach

    DEFF Research Database (Denmark)

    Rodrigo, Katarzyna Agnieszka; Heiroth, Sebastian; Pryds, Nini;

    Ceria-based thin films are often applied as key functional components in miniaturized electroceramic devices such as solid oxide fuel cells or gas sensors. Processing routes that prevent thermal degradation and yield access to the optimum microstructures are sought. Multi-step growth, involving......), to the growth of dense, gas impermeable 10 mol% gadolinia-doped ceria (CGO10) solid electrolyte can be overcome by the seeding process. In order to evaluate the seed layer preparation, the effects of different thermal annealing treatments on the morphology, microstructure and surface roughness of ultrathin CGO......10 layers with a thickness of 4 nm, 13 nm and 22 nm, respectively, grown on Mg(100), were studied by atomic force microscopy and X-ray reflectometry....

  12. Adhesive flexible barrier film, method of forming same, and organic electronic device including same

    Science.gov (United States)

    Blizzard, John Donald; Weidner, William Kenneth

    2013-02-05

    An adhesive flexible barrier film comprises a substrate and a barrier layer disposed on the substrate. The barrier layer is formed from a barrier composition comprising an organosilicon compound. The adhesive flexible barrier film also comprises an adhesive layer disposed on the barrier layer and formed from an adhesive composition. A method of forming the adhesive flexible barrier film comprises the steps of disposing the barrier composition on the substrate to form the barrier layer, disposing the adhesive composition on the barrier layer to form the adhesive layer, and curing the barrier layer and the adhesive layer. The adhesive flexible barrier film may be utilized in organic electronic devices.

  13. Efficient gas barrier properties of multi-layer films based on poly(lactic acid) and fish gelatin.

    Science.gov (United States)

    Hosseini, Seyed Fakhreddin; Javidi, Zahra; Rezaei, Masoud

    2016-11-01

    Multi-layer film structures of poly(lactic acid) (PLA) and fish gelatin (FG), prepared using the solvent casting technique, were studied in an effort to produce bio-based films with low oxygen (OP) and water vapor permeability (WVP). The scanning electron microscopy (SEM) images of triple-layer film showed that the outer PLA layers are being closely attached to the inner FG layer to make continuous film. The OP of multi-layer film (5.02cm(3)/m(2)daybar) decreased more than 8-fold compared with that of the PLA film, and the WVP of multi-layer film (0.125gmm/kPah m(2)) also decreased 11-fold compared with that of the FG film. Lamination with PLA profoundly increased the water resistance of the bare gelatin film. Meanwhile, the tensile strength of the triple-layer film (25±2.13MPa) was greater than that of FG film (7.48±1.70MPa). At the same time, the resulting film maintains high optical clarity. Differential scanning calorimetry (DSC) analysis also revealed that the materials were compatible showing only one Tg which decreased with FG deposition. This material exhibits an environmental-friendliness potential and a high versatility in food packaging.

  14. Nucleation and initial growth of atomic layer deposited titanium oxide determined by spectroscopic ellipsometry and the effect of pretreatment by surface barrier discharge

    Energy Technology Data Exchange (ETDEWEB)

    Cameron, David C., E-mail: dccameron@mail.muni.cz [R& D Centre for Low-Cost Plasma and Nanotechnology Surface Modification, Masaryk University, Kotlářská 267/2, 611 37 Brno (Czech Republic); Krumpolec, Richard, E-mail: richard.krumpolec@fmph.uniba.sk [Department of Experimental Physics, Faculty of Mathematics, Physics and Informatics, Comenius University, Mlynská dolina, 842 4 Bratislava (Slovakia); Ivanova, Tatiana V., E-mail: tatiana.ivanova@lut.fi [ASTRaL team, Laboratory of Green Chemistry, Lappeenranta University of Technology, Sammonkatu 12, 50130 Mikkeli (Finland); Homola, Tomáš, E-mail: tomas.homola@mail.muni.cz [R& D Centre for Low-Cost Plasma and Nanotechnology Surface Modification, Masaryk University, Kotlářská 267/2, 611 37 Brno (Czech Republic); Černák, Mirko, E-mail: cernak@physics.muni.cz [R& D Centre for Low-Cost Plasma and Nanotechnology Surface Modification, Masaryk University, Kotlářská 267/2, 611 37 Brno (Czech Republic)

    2015-08-01

    Highlights: • Spectroscopic ellipsometry shows initial nucleation and growth process in atomic layer deposited titanium dioxide. • Quantum confinement effects were used to measure evolution of crystallite size. • Crystallite surface density can be extracted from ellipsometric surface roughness data and crystallite size. • Pretreatment of silicon substrates by diffuse coplanar surface barrier discharge has only minor effects on titanium dioxide film nucleation and growth. - Abstract: This paper reports on the use of spectroscopic ellipsometry to characterise the initial nucleation stage of the atomic layer deposition of the anatase phase of titanium dioxide on silicon substrates. Careful control and analysis of the ellipsometric measurements enables the determination of the evolution of crystallite diameter and surface density in the nucleation stage before a continuous film is formed. This growth behaviour is in line with atomic force microscopy measurements of the crystallite size. The crystallite diameter is a linear function of the number of ALD cycles with a slope of approximately 1.7 Å cycle{sup −1} which is equivalent to a layer growth rate of 0.85 Å cycle{sup −1} consistent with a ripening process which increases the crystallite size while reducing their density. The crystallite density decreases from ∼3 × 10{sup 17} m{sup −3} in the initial nucleation stages to ∼3 × 10{sup 15} m{sup −3} before the film becomes continuous. The effect of exposing the substrate to a diffuse coplanar surface barrier discharge in an air atmosphere before deposition was measured and only small differences were found: the plasma treated samples were slightly rougher in the initial stages and required a greater number of cycles to form a continuous film (∼80) compared to the untreated films (∼50). A thicker layer of native oxide was found after plasma treatment.

  15. Photoelectric emission from a finite barrier quantum well formed in a GaAs film sandwiched between (Al,Ga)As layers

    Energy Technology Data Exchange (ETDEWEB)

    Kar, A.; Sinha, M.; Bose, C. [Department of Electronics and Telecommunication Engineering, Jadavpur University, Kolkata 700032 (India)

    2007-02-15

    In this communication an attempt is made to estimate the photoelectric current density from a finite barrier quantum well (QW) formed in an ultrathin film of semiconductor. The variation of electron effective mass in various energy levels of the conduction band has been considered in the present estimation. For computational purposes, the QW with rectangular potential of finite barrier has been modeled by a thin film of GaAs sandwiched between barrier layers of (Al,Ga)As, and the well depth has been varied by varying the Al concentration. Results have been compared with standard established results for photoelectric emission from ultrathin films of GaAs, where the rectangular QW was assumed to be infinitely deep. The quantized nature of the photoelectric current density provides a description of energy level structures in QWs of varying widths and depths - both finite and infinite. The results indicate that to make an electron participate in the emission process, higher incident photon energy is required in case of a finite QW with respect to that of an infinite QW. An enhanced photoelectric current density is also obtained in the former case. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  16. Effects of conducting oxide barrier layers on the stability of Crofer® 22 APU/Ca3Co4O9 interfaces

    DEFF Research Database (Denmark)

    Holgate, Tim C.; Han, Li; Wu, NingYu

    2014-01-01

    characterized in terms of their thermal and electronic transport properties and chemical stability. With long-term exposure of the interfaced samples to 800 °C in air, the cobalt–manganese spinel acted as a diffusion barrier between the Ca3Co4O9 and the Crofer® 22 APU alloy resulting in improved interfacial...... available high-chrome iron alloy (i.e., Crofer® 22 APU) serving as the interconnect metal was spray coated with LaNi0.6Fe0.4O3 (LNFO) or (Mn,Co)3O4 spinel and then interfaced with a p-type thermoelectric material—calcium cobaltate (Ca3Co4O9)—using spark plasma sintering. The interfaces have been...... stability compared to that of samples containing LNFO as a barrier layer, and especially those without any barrier. The initial area specific interfacial resistance of the Ca3Co4O9/(Mn,Co)3O4/Crofer® 22 APU interface at 800 °C was found to be ∼1 mΩ·cm2....

  17. Growth and Characterization of AlGaN/AlN/GaN HEMT Structures with a Compositionally Step-Graded AlGaN Barrier Layer

    Institute of Scientific and Technical Information of China (English)

    MA ZHI-Yong; WANG Xiao-Liang; HU Guo-Xin; RAN Jun-Xue; XIAO Hong-Ling; LUO Wei-Jun; TANG Jian; LI Jian-Ping; LI Jin-Min

    2007-01-01

    A new AlGaN/AlN/GaN high electron mobility transistor (HEMT) structure using a Compositionally step-graded AlGaN barrier layer is grown on sapphire by metalorganic chemical vapour deposition (MOCVD). The structure demonstrates significant enhancement of two-dimensional electron gas (2DEG) mobility and smooth surface morphology compared with the conventional HEMT structure with high Al composition AlGaN barrier. The high 2DEG mobility of 1806 cm2 /Vs at room temperature and low rms surface roughness of 0.220 nm for a scan area of 5/umx5/um are attributed to the improvement of interfacial and crystal quality by employing the step-graded barrier to accommodate the large lattice mismatch stress. The 2DEG sheet density is independent of the measurement temperature, showing the excellent 2DEG confinement of the step-graded structure. A low average sheet resistance of 314.5 ft/square, with a good resistance uniformity of 0.68%, is also obtained across the 50mm epilayer wafer. HEMT devices are successfully fabricated using this material structure, which exhibits a maximum extrinsic transconductance of 218 mS/ mm and a maximum drain current density of 800m A/mm.

  18. Antibacterial and barrier properties of oriented polymer films with ZnO thin films applied with atomic layer deposition at low temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Vähä-Nissi, Mika, E-mail: mika.vaha-nissi@vtt.fi [VTT Technical Research Centre of Finland, P.O. Box 1000, FI-02044, VTT (Finland); Pitkänen, Marja; Salo, Erkki; Kenttä, Eija [VTT Technical Research Centre of Finland, P.O. Box 1000, FI-02044, VTT (Finland); Tanskanen, Anne, E-mail: Anne.Tanskanen@aalto.fi [Aalto University, School of Chemical Technology, Department of Chemistry, Laboratory of Inorganic Chemistry, P.O. Box 16100, FI-00076 Aalto (Finland); Sajavaara, Timo, E-mail: timo.sajavaara@jyu.fi [University of Jyväskylä, Department of Physics, P.O. Box 35, FI-40014 Jyväskylä (Finland); Putkonen, Matti; Sievänen, Jenni; Sneck, Asko; Rättö, Marjaana [VTT Technical Research Centre of Finland, P.O. Box 1000, FI-02044, VTT (Finland); Karppinen, Maarit, E-mail: Maarit.Karppinen@aalto.fi [Aalto University, School of Chemical Technology, Department of Chemistry, Laboratory of Inorganic Chemistry, P.O. Box 16100, FI-00076 Aalto (Finland); Harlin, Ali [VTT Technical Research Centre of Finland, P.O. Box 1000, FI-02044, VTT (Finland)

    2014-07-01

    Concerns on food safety, and need for high quality and extended shelf-life of packaged foods have promoted the development of antibacterial barrier packaging materials. Few articles have been available dealing with the barrier or antimicrobial properties of zinc oxide thin films deposited at low temperature with atomic layer deposition (ALD) onto commercial polymer films typically used for packaging purposes. The purpose of this paper was to study the properties of ZnO thin films compared to those of aluminum oxide. It was also possible to deposit ZnO thin films onto oriented polylactic acid and polypropylene films at relatively low temperatures using ozone instead of water as an oxidizing precursor for diethylzinc. Replacing water with ozone changed both the structure and the chemical composition of films deposited on silicon wafers. ZnO films deposited with ozone contained large grains covered and separated probably by a more amorphous and uniform layer. These thin films were also assumed to contain zinc salts of carboxylic acids. The barrier properties of a 25 nm ZnO thin film deposited with ozone at 100 °C were quite close to those obtained earlier with ALD Al{sub 2}O{sub 3} of similar apparent thickness on similar polymer films. ZnO thin films deposited at low temperature indicated migration of antibacterial agent, while direct contact between ZnO and Al{sub 2}O{sub 3} thin films and bacteria promoted antibacterial activity. - Highlights: • Thin films were grown from diethylzinc also with ozone instead of water at 70 and 100 °C. • ZnO films deposited with diethylzinc and ozone had different structures and chemistries. • Best barrier properties obtained with zinc oxide films close to those obtained with Al{sub 2}O{sub 3} • Ozone as oxygen source provided better barrier properties at 100 °C than water. • Both aluminum and zinc oxide thin films showed antimicrobial activity against E. coli.

  19. Influence of PEDOT:PSS on the effectiveness of barrier layers prepared by atomic layer deposition in organic light emitting diodes

    Energy Technology Data Exchange (ETDEWEB)

    Wegler, Barbara, E-mail: barbara.wegler@siemens.com [Siemens AG, Corporate Technology, Guenther-Scharowsky-Strasse 1, 91058 Erlangen, Germany and Center for Medical Physics and Engineering, University of Erlangen-Nuremberg, Henkestrasse 91, 91052 Erlangen (Germany); Schmidt, Oliver [Siemens AG, Corporate Technology, Guenther-Scharowsky-Strasse 1, 91058 Erlangen (Germany); Hensel, Bernhard [Center for Medical Physics and Engineering, University of Erlangen-Nuremberg, Henkestrasse 91, 91052 Erlangen (Germany)

    2015-01-15

    Organic light emitting diodes (OLEDs) are well suited for energy saving lighting applications, especially when thinking about highly flexible and large area devices. In order to avoid the degradation of the organic components by water and oxygen, OLEDs need to be encapsulated, e.g., by a thin sheet of glass. As the device is then no longer flexible, alternative coatings are required. Atomic layer deposition (ALD) is a very promising approach in this respect. The authors studied OLEDs that were encapsulated by 100 nm Al{sub 2}O{sub 3} deposited by ALD. The authors show that this coating effectively protects the active surface area of the OLEDs from humidity. However, secondary degradation processes still occur at sharp edges of the OLED stack where the extremely thin encapsulation layer does not provide perfect coverage. Particularly, the swelling of poly(3,4-ethylenedioxythiophene) mixed with poly(styrenesulfonate), which is a popular choice for the planarization of the bottom electrode and at the same time acts as a hole injection layer, affects the effectiveness of the encapsulation layer.

  20. Impact of strain relaxation of AlGaN barrier layer on the performance of high Al-content AlGaN/GaN HEMT

    Institute of Scientific and Technical Information of China (English)

    YANG Yan; HAO Yue; ZHANG Jincheng; WANG Chong; FENG Qian

    2006-01-01

    The effects of strain relaxation of AlGaN barrier layer on the conduction band profile, electron concentration and two-dimensional gas (2DEG) sheet charge density in a high Al-content AlGaN/GaN high electron mobility transistor (HEMT) are calculated by self-consistently solving Poisson's and Schr(o)dinger's equations. The effect of strain relaxation on dc I-V characteristics of AlxGa1-xN/GaN HEMT is obtained by developing a nonlinear charge-control model that describes the accurate relation of 2DEG sheet charge density and gate voltage. The model predicts a highest 2DEG sheet charge density of 2.42×1013 cm-2 and maximum saturation current of 2482.8 mA/mm at a gate bias of 2 V for 0.7 μm Al0.50Ga0.50N/GaN HEMT with strain relaxation r =0 and 1.49×1013 cm-2 and 1149.7 mA/mm with strain relaxation r =1. The comparison between simulations and physical measurements shows a good agreement. Results show that the effect of strain relaxation must be considered when analyzing the characteristics of high Al-content AlGaN/GaN HEMT theoretically, and the performance of the devices is improved by decreasing the strain relaxation of AlGaN barrier layer.

  1. Effect of double MgO tunneling barrier on thermal stability and TMR ratio for perpendicular MTJ spin-valve with tungsten layers

    Science.gov (United States)

    Lee, Seung-Eun; Takemura, Yasutaka; Park, Jea-Gun

    2016-10-01

    A tunneling magneto-resistance (TMR) ratio of ˜163% at an annealing temperature of 400 °C was achieved in a single MgO-based perpendicular-magnetic-tunneling-junction (p-MTJ) spin valve with a tungsten (W)/tantalum (Ta) seed and W capping layer instead of with a Ta seed and capping layer. This was done by improving the interface perpendicular magnetic anisotropy (i-PMA) characteristic of the Co2Fe6B2 free layer and face-centered-cubic (f.c.c.) crystallinity of the MgO tunneling barrier. In particular, a TMR ratio of ˜141% at an annealing temperature of 400 °C and a thermal stability at room temperature of ˜61 were achieved in a double MgO-based p-MTJ spin valve with W/Ta seed, W spacer, and W capping layers by doubling the i-PMA magnetic moment and increasing slightly magnetic anisotropy field (Hk).

  2. Proactive control of the metal-ceramic interface behavior of thermal barrier coatings using an artificial alpha-Al2O 3 layer

    Science.gov (United States)

    Su, Yi-Feng

    The reliability and life of thermal barrier coatings (TBCs) used in the hottest sections of advanced aircraft engines and power generation systems are largely dictated by: (1) the ability of a metallic bond coating to form an adherent thermally grown oxide (TGO) at the metal-ceramic interface and (2) the rate at which the TGO grows upon oxidation. It is postulated that a thin alpha-Al2O3 layer, if it could be directly deposited on a Ni-based alloy, will guide the alloy surface to form a TGO that is more tenacious and slower growing than what is attainable with state-of-the-art bond coatings. A chemical vapor deposition (CVD) process was used to directly deposit an alpha-Al2O3 layer on the surface of a single crystal Ni-bases superalloy. The layer was 150 nm thick, and consisted of small columnar grains (˜100 to 200 nm) with alpha-Al2O 3 as the major phase with a minute amount of theta-Al2O 3. Within 0.5 h of oxidation at 1150°C, the resulting TGO formed on the alloy surface underwent significant lateral grain growth. Consequently, within this time scale, the columnar nature of the TGO became well established. After 50 h, a network of ridges was clearly observed on the TGO surface instead of equiaxed grains typically observed on uncoated alloy surface. Comparison of the TGO morphologies observed with and without the CVD-Al2O 3 layer suggested that the transient oxidation of the alloy surface was considerably reduced. The alloy coated with the CVD-Al2O 3 layer also produced a much more adherent and slow growing TGO in comparison to that formed on the uncoated alloy surface. The CVD-Al2O 3 layer also improved its spallation resistance. Without the CVD-Al 2O3 layer, more than 50% of the TGO spalled off the alloy surface after 500 h in oxidation with significant wrinkling of the TGO that remained on the alloy surface. In contrast, the TGO remained intact with the CVD-Al2O3 layer after the 500 h exposure. Furthermore, the CVD layer significantly reduced the degree of

  3. TiO 2 Conduction Band Modulation with In 2 O 3 Recombination Barrier Layers in Solid-State Dye-Sensitized Solar Cells

    KAUST Repository

    Brennan, Thomas P.

    2013-11-21

    Atomic layer deposition (ALD) was used to grow subnanometer indium oxide recombination barriers in a solid-state dye-sensitized solar cell (DSSC) based on the spiro-OMeTAD hole-transport material (HTM) and the WN1 donor-π-acceptor organic dye. While optimal device performance was achieved after 3-10 ALD cycles, 15 ALD cycles (∼2 Å of In2O 3) was observed to be optimal for increasing open-circuit voltage (VOC) with an average improvement of over 100 mV, including one device with an extremely high VOC of 1.00 V. An unexpected phenomenon was observed after 15 ALD cycles: the increasing VOC trend reversed, and after 30 ALD cycles VOC dropped by over 100 mV relative to control devices without any In2O3. To explore possible causes of the nonmonotonic behavior resulting from In2O3 barrier layers, we conducted several device measurements, including transient photovoltage experiments and capacitance measurements, as well as density functional theory (DFT) studies. Our results suggest that the VOC gains observed in the first 20 ALD cycles are due to both a surface dipole that pulls up the TiO2 conduction band and recombination suppression. After 30 ALD cycles, however, both effects are reversed: the surface dipole of the In2O3 layer reverses direction, lowering the TiO 2 conduction band, and mid-bandgap states introduced by In 2O3 accelerate recombination, leading to a reduced V OC. © 2013 American Chemical Society.

  4. Low-Frequency Noise Properties of GaN Schottky Barriers Deposited on Intermediate Temperature Buffer Layers

    Institute of Scientific and Technical Information of China (English)

    B.; H.; Leung; W.; K.; Fong; C.; Surya; L.; W.; Lu; W.; K.; Ge

    2003-01-01

    Flicker noise and deep level transient spectroscopy were used to characterize defect properties of GaN films with different buffer structures. Results indicate improved properties with the use of intermediate temperature buffer layers due to the relaxation of residue strain in the films.

  5. Schottky barrier contrasts in single and bi-layer graphene contacts for MoS{sub 2} field-effect transistors

    Energy Technology Data Exchange (ETDEWEB)

    Du, Hyewon; Kim, Taekwang; Shin, Somyeong; Kim, Dahye; Seo, Sunae, E-mail: sunaeseo@sejong.ac.kr [Department of Physics, Sejong University, Seoul 143-747 (Korea, Republic of); Kim, Hakseong; Lee, Sang Wook [Divison of Quantum Phases and Devices, Department of Physics, Konkuk University, Seoul 143-701 (Korea, Republic of); Sung, Ji Ho; Jo, Moon-Ho [Center for Artificial Low-Dimensional Electronic Systems, Institute for Basic Science (IBS), 77 Cheongam-Ro, Pohang 790-784 (Korea, Republic of); Division of Advanced Materials Science, Pohang University of Science and Technology (POSTECH), 77 Cheongam-Ro, Pohang 790-784 (Korea, Republic of); Lee, Myoung Jae [Center for Artificial Low-Dimensional Electronic Systems, Institute for Basic Science (IBS), 77 Cheongam-Ro, Pohang 790-784 (Korea, Republic of); Seo, David H. [Samsung Electronics Company, Limited, System LSI Division, TD Team, Gyunggi 446-711 (Korea, Republic of)

    2015-12-07

    We have investigated single- and bi-layer graphene as source-drain electrodes for n-type MoS{sub 2} transistors. Ti-MoS{sub 2}-graphene heterojunction transistors using both single-layer MoS{sub 2} (1M) and 4-layer MoS{sub 2} (4M) were fabricated in order to compare graphene electrodes with commonly used Ti electrodes. MoS{sub 2}-graphene Schottky barrier provided electron injection efficiency up to 130 times higher in the subthreshold regime when compared with MoS{sub 2}-Ti, which resulted in V{sub DS} polarity dependence of device parameters such as threshold voltage (V{sub TH}) and subthreshold swing (SS). Comparing single-layer graphene (SG) with bi-layer graphene (BG) in 4M devices, SG electrodes exhibited enhanced device performance with higher on/off ratio and increased field-effect mobility (μ{sub FE}) due to more sensitive Fermi level shift by gate voltage. Meanwhile, in the strongly accumulated regime, we observed opposing behavior depending on MoS{sub 2} thickness for both SG and BG contacts. Differential conductance (σ{sub d}) of 1M increases with V{sub DS} irrespective of V{sub DS} polarity, while σ{sub d} of 4M ceases monotonic growth at positive V{sub DS} values transitioning to ohmic-like contact formation. Nevertheless, the low absolute value of σ{sub d} saturation of the 4M-graphene junction demonstrates that graphene electrode could be unfavorable for high current carrying transistors.

  6. Effect of Y2O3 stabilized ZrO2 coating with tri-model structure on bi-layered thermally grown oxide evolution in nano thermal barrier coating systems at elevated temperatures

    Institute of Scientific and Technical Information of China (English)

    Mohammadreza Daroonparvar; Muhamad Azizi Mat Yajid; Noordin Mohd Yusof; Hamid Reza Bakhsheshi-Rad; Z Valefi; Esah Hamzah

    2014-01-01

    Bi-layered thermally grown oxide (TGO) layer plays a major role in the spallation of Y2O3 stabilized ZrO2 (YSZ) layer form the bond coat in the thermal barrier coating (TBC) systems during oxidation. On the other hand, bi-layered TGO formation and growth in the TBC systems with nanostructured YSZ have not been deeply investigated during cyclic oxidation. Hence, Inconel 738/NiCrAlY/normal YSZ and Inconel 738/NiCrAlY/nano YSZ systems were pre-oxidized at 1000 °C and then subjected to cyclic oxidation at 1150 °C. According to microstructural observations, nanostructured YSZ layer over the bond coat should have less mi-cro-cracks and pinholes, due to the compactness of the nanostructure and the presence of nano zones that resulted in lower O infiltration into the nanothermal barrier coating system, formation of thinner and nearly continuous mono-layered thermally grown oxide on the bond coat during pre-oxidation, lower spinels formation at the Al2O3/YSZ interface and finally, reduction of bi-layered thermally grown oxide thickness during cyclic oxidation. It was found that pre-heat treatment and particularly coating microstructure could influence microstructural evolution (bi-layered TGO thickness) and durability of thermal barrier coating systems during cyclic oxidation.

  7. Study on transconductance non-linearity of AlGaN/GaN HEMTs considering acceptor-like traps in barrier layer under the gate

    Science.gov (United States)

    Du, Jiangfeng; Chen, Nanting; Jiang, Zhiguang; Bai, Zhiyuan; Liu, Yong; Liu, Yang; Yu, Qi

    2016-01-01

    DC and pulsed transfer characteristics of AlGaN/GaN high electron mobility transistors (HEMTs) have been systematically investigated. A significant difference of transconductance linearity between DC and gate-pulsed measurements is clearly observed. The acceptor-like traps in the barrier layer under the gate is the main cause of non-linear behavior of AlGaN/GaN HEMTs transconductance. A physical model has been constructed to explain the phenomenon. In the modeling, an acceptor-like trap concentration of 1.2 × 1019 cm-3 with an energy level of 0.5 eV below the conduction band minimum shows the best fit to measurement results.

  8. Angle-resolved soft X-ray magnetic circular dichroism in a monatomic Fe layer facing an MgO(0 0 1) tunnel barrier

    Energy Technology Data Exchange (ETDEWEB)

    Mamiya, K. [Photon Factory, Institute of Materials Structure Science (IMSS), High Energy Accelerator Research Organization, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Koide, T. [Photon Factory, Institute of Materials Structure Science (IMSS), High Energy Accelerator Research Organization, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan)]. E-mail: tsuneharu.koide@kek.jp; Ishida, Y. [Department of Complexity Science and Engineering, University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8561 (Japan); Osafune, Y. [Department of Complexity Science and Engineering, University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8561 (Japan); Fujimori, A. [Department of Complexity Science and Engineering, University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8561 (Japan); Suzuki, Y. [Graduate School of Engineering Science, Osaka University, 1-3 Toyonaka, Osaka 560-8531 (Japan); NanoElectronics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8568 (Japan); Katayama, T. [NanoElectronics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8568 (Japan); Yuasa, S. [NanoElectronics Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8568 (Japan)

    2006-11-15

    The electronic and magnetic states of a monatomic Fe(0 0 1) layer directly facing an MgO(0 0 1) tunnel barrier were studied by angle-resolved X-ray magnetic circular dichroism (XMCD) at the Fe L {sub 2,3} edges in the longitudinal (L) and transverse (T) arrangements. A strong XMCD reveals no oxidation of the 1-ML Fe, showing its crucial role in giant tunnel magnetoresistance effects in Fe/MgO/Fe magnetic tunnel junctions. Sum-rule analyses of the angle-resolved XMCD give values of a spin moment, in-plane and out-of-plane orbital and magnetic dipole moments. Argument is given on their physical implication.

  9. Improving hole injection and carrier distribution in InGaN light-emitting diodes by removing the electron blocking layer and including a unique last quantum barrier

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Liwen, E-mail: lwcheng@yzu.edu.cn; Chen, Haitao; Wu, Shudong [College of Physics Science and Technology & Institute of Optoelectronic Technology, Yangzhou University, Yangzhou 225002 (China)

    2015-08-28

    The effects of removing the AlGaN electron blocking layer (EBL), and using a last quantum barrier (LQB) with a unique design in conventional blue InGaN light-emitting diodes (LEDs), were investigated through simulations. Compared with the conventional LED design that contained a GaN LQB and an AlGaN EBL, the LED that contained an AlGaN LQB with a graded-composition and no EBL exhibited enhanced optical performance and less efficiency droop. This effect was caused by an enhanced electron confinement and hole injection efficiency. Furthermore, when the AlGaN LQB was replaced with a triangular graded-composition, the performance improved further and the efficiency droop was lowered. The simulation results indicated that the enhanced hole injection efficiency and uniform distribution of carriers observed in the quantum wells were caused by the smoothing and thinning of the potential barrier for the holes. This allowed a greater number of holes to tunnel into the quantum wells from the p-type regions in the proposed LED structure.

  10. Large-scale fabrication of linear low density polyethylene/layered double hydroxides composite films with enhanced heat retention, thermal, mechanical, optical and water vapor barrier properties

    Science.gov (United States)

    Xie, Jiazhuo; Zhang, Kun; Zhao, Qinghua; Wang, Qingguo; Xu, Jing

    2016-11-01

    Novel LDH intercalated with organic aliphatic long-chain anion was large-scale synthesized innovatively by high-energy ball milling in one pot. The linear low density polyethylene (LLDPE)/layered double hydroxides (LDH) composite films with enhanced heat retention, thermal, mechanical, optical and water vapor barrier properties were fabricated by melt blending and blowing process. FT IR, XRD, SEM results show that LDH particles were dispersed uniformly in the LLDPE composite films. Particularly, LLDPE composite film with 1% LDH exhibited the optimal performance among all the composite films with a 60.36% enhancement in the water vapor barrier property and a 45.73 °C increase in the temperature of maximum mass loss rate compared with pure LLDPE film. Furthermore, the improved infrared absorbance (1180-914 cm-1) of LLDPE/LDH films revealed the significant enhancement of heat retention. Therefore, this study prompts the application of LLDPE/LDH films as agricultural films with superior heat retention.

  11. Contrasting conduction mechanisms of two internal barrier layer capacitors: (Mn, Nb)-doped SrTiO3 and CaCu3Ti4O12

    Science.gov (United States)

    Tsuji, Kosuke; Chen, Wei-Ting; Guo, Hanzheng; Lee, Wen-Hsi; Guillemet-Fritsch, Sophie; Randall, Clive A.

    2017-02-01

    The d.c. conduction is investigated in the two different types of internal barrier layer capacitors, namely, (Mn, Nb)-doped SrTiO3 (STO) and CaCu3Ti4O12 (CCTO). Scanning electron microscopy (SEM) and Capacitance - Voltage (C-V) analysis are performed to estimate the effective electric field at a grain boundary, EGB. Then, the d.c. conduction mechanism is discussed based on the J (Current density)-EGB characteristics. Three different conduction mechanisms are successively observed with the increase of EGB in both systems. In (Mn, Nb)-doped STO, non-linear J-EGB characteristics is temperature dependent at the intermediate EGB and becomes relatively insensitive to the temperature at the higher EGB. The J- EGB at each regime is explained by the Schottky emission (SE) followed by Fowler-Nordheim (F-N) tunneling. Based on the F-N tunneling, the breakdown voltage is then scaled by the function of the depletion layer thickness and Schottky barrier height at the average grain boundary. The proposed function shows a clear linear relationship with the breakdown. On the other hand, F-N tunneling was not observed in CCTO in our measurement. Ohmic, Poole-Frenkel (P-F), and SE are successively observed in CCTO. The transition point from P-F and SE depends on EGB and temperature. A charge-based deep level transient spectroscopy study reveals that 3 types of trap states exist in CCTO. The trap one with Et ˜ 0.65 eV below the conduction band is found to be responsible for the P-F conduction.

  12. Modification of metal–InGaAs Schottky barrier behaviour by atomic layer deposition of ultra-thin Al{sub 2}O{sub 3} interlayers

    Energy Technology Data Exchange (ETDEWEB)

    Chauhan, Lalit [School of Physical Sciences, Dublin City University, Dublin 9 (Ireland); Gupta, Suman; Jaiswal, Piyush; Bhat, Navakanta; Shivashankar, S.A. [Centre for Nano Science and Engineering (CeNSE), Indian Institute of Science, Bangalore 560012 (India); Hughes, G. [School of Physical Sciences, Dublin City University, Dublin 9 (Ireland)

    2015-08-31

    The effect of inserting ultra-thin atomic layer deposited Al{sub 2}O{sub 3} dielectric layers (1 nm and 2 nm thick) on the Schottky barrier behaviour for high (Pt) and low (Al) work function metals on n- and p-doped InGaAs substrates has been investigated. Rectifying behaviour was observed for the p-type substrates (both native oxide and sulphur passivated) for both the Al/p-InGaAs and Al/Al{sub 2}O{sub 3}/p-InGaAs contacts. The Pt contacts directly deposited on p-InGaAs displayed evidence of limited rectification which increased with Al{sub 2}O{sub 3} interlayer thickness. Ohmic contacts were formed for both metals on n-InGaAs in the absence of an Al{sub 2}O{sub 3} interlayer, regardless of surface passivation. However, limited rectifying behaviour was observed for both metals on the 2 nm Al{sub 2}O{sub 3}/n-InGaAs samples for the sulphur passivated InGaAs surface, indicating the importance of both surface passivation and the presence of an ultra-thin dielectric interlayer on the current–voltage characteristics displayed by these devices. - Highlights: • Investigation of the modification of metal–InGaAs Schottky barrier (SB) behaviour • Improving metal–InGaAs interface by sulphur passivation and ultrathin interlayer • Examine the effect of low work function and high work function metals on SB • Different SB behaviours observed on both n-type InGaAs and p-type InGaAs • Metal/n-InGaAs interface is more strongly pinned than the metal/p-InGaAs interface.

  13. Long-term effects of multiply pulsed dielectric barrier discharges in air on thin water layers over tissue: stationary and random streamers

    Science.gov (United States)

    Tian, Wei; Kushner, Mark J.

    2015-12-01

    Tissue covered by thin liquid layers treated by atmospheric pressure plasmas for biomedical applications ultimately requires a reproducible protocol for human healthcare. The desired outcomes of wet tissue treatment by dielectric barrier discharges (DBDs) depend on the plasma dose which determines the integral fluence of radicals, ions, electric fields and UV/VUV photons incident onto the tissue. These fluences are controlled by power, frequency and treatment time. To first order, these parameters determine the energy deposition (J cm-2) onto the tissue. However, energy deposition may not be the only parameter that determines the fluences of reactants to the underlying tissue. In this paper, we report on a computational investigation of multipulse DBDs interacting with wet tissue. The DBDs were simulated for 100 pulses at different repetition rates and liquid thicknesses followed by 10 s or more of afterglow. Two schemes were investigated—stationary and random. In the stationary scheme, the DBD plasma streamer continues to strike at the same location on the liquid layer, whereas in the random scheme the plasma streamer strikes at random locations on the liquid layer. These differences in streamer locations strongly affect the spatial distribution of solvated species such as OHaq and H2O2aq (‘aq’ represents an aqueous species), which have high rates of solvation. The spatial distribution of species such as NOaq, which have low rates of solvation, are less affected by the location of the streamer due to the remediating effects of diffusion in the air. The end result is that fluences to the tissue are sensitive to the spatial location of the streamer due to the ensuing reactions in the liquid between species that have low and high rates of solvation. These reactions can be controlled not only through location of the streamer, but also by repetition rate and thickness of the liquid layer.

  14. Improving corn silage quality in the top layer of farm bunker silos through the use of a next-generation barrier film with high impermeability to oxygen.

    Science.gov (United States)

    Borreani, G; Tabacco, E

    2014-01-01

    This study examined the effect on the fermentation, chemical, and microbiological quality of corn silage covered with a new-generation high oxygen barrier film (HOB) made with a special grade of ethylene-vinyl alcohol (EVOH) compared with a standard polyethylene film (PE). Two bunkers (farms 1 and 2) were divided into 2 parts lengthwise so that half of the silo would be covered with PE film and the other with HOB film. Plastic net bags with fresh chopped corn were buried in the upper layer (close to and far from the wall) and in the central part of the bunkers. During spring-summer consumption, the bags were unloaded, weighed, and subsampled to analyze the dry matter (DM) content, neutral detergent fiber and starch contents, pH, lactic and monocarboxylic acids, yeast and mold counts, aerobic and anaerobic spore-former counts, and aerobic stability. We also determined the economic benefit of applying the novel covering. The top layer of silage conserved under the HOB film had a higher lactic acid content and lower pH; lower counts of yeasts, molds, and aerobic and anaerobic spore-formers; higher aerobic stability; and lower DM losses than the silage conserved under the PE film. The use of the HOB film prevented almost all of the silage in the upper layer from spoiling; only 2 out of 32 samples had a mold count >6log10 cfu/g. This led to a net economic gain when the HOB film was used on both farms due to the increased DM recovery and reduced labor time required to clean the upper layer, even though the HOB film cost about 2.3 times more than the PE film. Furthermore, use of the HOB film, which ensures a longer shelf life of silage during consumption, reduced the detrimental effect of yeasts, molds, and aerobic and anaerobic spore-formers on the nutritional and microbiological quality of the unloaded silage.

  15. Adhesion, resistivity and structural, optical properties of molybdenum on steel sheet coated with barrier layer done by sol–gel for CIGS solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Amouzou, Dodji, E-mail: dodji.amouzou@fundp.ac.be [Research Centre in Physics of Matter and Radiation (PMR), University of Namur (FUNDP), Rue de Bruxelles 61, 5000 Namur (Belgium); Dumont, Jacques [Research Centre in Physics of Matter and Radiation (PMR), University of Namur (FUNDP), Rue de Bruxelles 61, 5000 Namur (Belgium); Fourdrinier, Lionel; Richir, Jean-Baptiste; Maseri, Fabrizio [CRM-Group, Boulevard de Colonster, B 57, 4000 Liège (Belgium); Sporken, Robert [Research Centre in Physics of Matter and Radiation (PMR), University of Namur (FUNDP), Rue de Bruxelles 61, 5000 Namur (Belgium)

    2013-03-01

    Molybdenum films are investigated on stainless steel substrates coated with polysilazane based sol–gel and SiO{sub x} layers for flexible CIGS solar cell applications. Thermal stability of the multilayer has been studied. The thickness of polysilazane films are significantly reduced (17%) after heat treatment suggesting a thermal degradation. Four different microstructures were found for Mo films by varying argon total pressure from 2.6 × 10{sup −1} Pa to 2.6 Pa. It was shown that continuous films, low sheet resistance (0.5 Ω/□) and well facetted grains can be achieved when Mo films are deposited on heated substrates at homologous temperature, T of 0.2. - Highlights: ► Steel sheet is functionalized for Cu[Inx,Ga(1 − x)Se2] solar cells. ► Varying deposition pressure impacts the microstructure of Mo films. ► High thermal stability of the sol gel based barrier layer has been investigated. ► Low sheet resistance and continuous Mo films have been obtained at 550°C. ► Thermal stability of functionalized steel sheets at 550°C has been investigated.

  16. High-barrier Schottky contact on n-type 4H-SiC epitaxial layer and studies of defect levels by deep level transient spectroscopy (DLTS)

    Science.gov (United States)

    Nguyen, Khai V.; Pak, Rahmi O.; Oner, Cihan; Mannan, Mohammad A.; Mandal, Krishna C.

    2015-08-01

    High barrier Schottky contact has been fabricated on 50 μm n-type 4H-SiC epitaxial layers grown on 350 μm thick substrate 8° off-cut towards the [11̅20] direction. The 4H-SiC epitaxial wafer was diced into 10 x 10 mm2 samples. The metal-semiconductor junctions were fabricated by photolithography and dc sputtering with ruthenium (Ru). The junction properties were characterized through current-voltage (I-V) and capacitance-voltage (C-V) measurements. Detectors were characterized by alpha spectroscopy measurements in terms of energy resolution and charge collection efficiency using a 0.1 μCi 241Am radiation source. It was found that detectors fabricated from high work function rare transition metal Ru demonstrated very low leakage current and significant improvement of detector performance. Defect characterization of the epitaxial layers was conducted by deep level transient spectroscopy (DLTS) to thoroughly investigate the defect levels in the active region. The presence of a new defect level induced by this rare transition metal-semiconductor interface has been identified and characterized.

  17. Comparative Study of SiO2, Al2O3, and BeO Ultrathin Interfacial Barrier Layers in Si Metal-Oxide-Semiconductor Devices

    Directory of Open Access Journals (Sweden)

    J. H. Yum

    2012-01-01

    Full Text Available In a previous study, we have demonstrated that beryllium oxide (BeO film grown by atomic layer deposition (ALD on Si and III-V MOS devices has excellent electrical and physical characteristics. In this paper, we compare the electrical characteristics of inserting an ultrathin interfacial barrier layer such as SiO2, Al2O3, or BeO between the HfO2 gate dielectric and Si substrate in metal oxide semiconductor capacitors (MOSCAPs and n-channel inversion type metal oxide semiconductor field effect transistors (MOSFETs. Si MOSCAPs and MOSFETs with a BeO/HfO2 gate stack exhibited high performance and reliability characteristics, including a 34% improvement in drive current, slightly better reduction in subthreshold swing, 42% increase in effective electron mobility at an electric field of 1 MV/cm, slightly low equivalent oxide thickness, less stress-induced flat-band voltage shift, less stress induced leakage current, and less interface charge.

  18. Influence of source and drain contacts on the properties of indium-gallium-zinc-oxide thin-film transistors based on amorphous carbon nanofilm as barrier layer.

    Science.gov (United States)

    Luo, Dongxiang; Xu, Hua; Zhao, Mingjie; Li, Min; Xu, Miao; Zou, Jianhua; Tao, Hong; Wang, Lei; Peng, Junbiao

    2015-02-18

    Amorphous indium-gallium-zinc-oxide thin film transistors (α-IGZO TFTs) with damage-free back channel wet-etch (BCE) process were achieved by introducing a carbon nanofilm as a barrier layer. We investigate the effects of different source-and-drain (S/D) materials on TFT performance. We find the TFT with Ti/C S/D electrodes exhibits a superior performance with higher output current, lower threshold voltage, and higher effective electron mobility compared to that of Mo/C S/D electrodes. Transmittance electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS) are employed to analysis the interfacial interaction between S/D metal/C/α-IGZO layers. The results indicate that the better performance of TFTs with Ti/C electrodes should be attributed to the formations of Ti-C and Ti-O at the Ti/C-contact regions, which lead to a lower contact resistance, whereas Mo film is relatively stable and does not react easily with C nanofilm, resulting in a nonohmic contact behavior between Mo/C and α-IGZO layer. However, both kinds of α-IGZO TFTs show good stability under thermal bias stress, indicating that the inserted C nanofilms could avoid the impact on the α-IGZO channel regions during S/D electrodes formation. Finally, we successfully fabricated a high-definition active-matrix organic lighting emitting diode prototype driven by α-IGZO TFTs with Ti/C electrodes in a pilot line.

  19. Measurement of residual stress in thermally grown oxide layers in thermal barrier coating systems - development of non-destructive test methods.

    Energy Technology Data Exchange (ETDEWEB)

    Saunders, S.R.J.; Banks, J.P.; Chen, G.; Chunnilall, C.J. [National Physical Lab., Teddington, Middlesex (United Kingdom)

    2004-07-01

    It is established that the adhesion of thermal barrier coatings (TBCs) is dependent upon the characteristics of the thermally grown oxide (TGO) that forms between the TBC (zirconia) and the corrosion resistant bond coat. Work has been carried using laser induced fluorescence out to investigate the properties of the TGO (normally alumina) as a function of ageing treatments. The zirconia layer is transparent to the laser light used and thus the laser light can cause fluorescence in the TGO layer present on the bondcoat, so that the method is non-destructive. Fluorescence in the TGO is caused by trace impurities of Cr in the alumina layer. The position of the spectral peaks generated is stress dependent so that residual stress in the TGO can be determined; the method is also known as piezospectroscopy. Residual stress maps were generated for an electron beam physical vapour deposited (EB-PVD) TBC that showed a large variation in residual stress over the surface of a coated sample. The two peaks generally associated with {alpha} alumina (R1 and R2) frequently appear as doublets with a high and low stress component. In addition, the presence of a metastable {theta}-alumina was detected in aged samples. It is believed that these observations can be related to incipient spallation of the TBC. The development of residual stress and the metastable oxide have been studied and correlated with the spallation behaviour of the TBC. Additionally, the intensity of the spectra has been shown to yield information about the Cr content of the TGO, and this in turn could also be used as an indication of the remaining life of the TBC system. (orig.)

  20. Al2O3/Au/Al2O3 layered films as tritium permeation barrier%Al2O3/Au/Al2O3层状阻氚薄膜

    Institute of Scientific and Technical Information of China (English)

    汤波楷; 何业东; 曹江利; 唐涛; 饶咏初

    2012-01-01

    Single Al2O3 films, single Au films and Al2O3/Au/Al2O3 layered films were prepared on 316L stainless steel substrate by megnetron sputtering. Then vapour phase permeation experiment of deuterium through 316L substrate and its film materials were carried out at 500℃ with a partial pressure of deuterium 0. 06 MPa. The results indicate that morphology of the three films is good and no phenomenon of cracking and spalling is found after deuterium permeation. Deuterium permeation reduction factors (PRF) of these films are over one order of magnitude relative to clean 316L. The performance of barrying deuterium increases progressively in the order of single Al2O3 films, single Au films and Al2O3/Au/Al2O3 ayered films. Al2O3/Au/Al2O3 layered films exhibit excellent performance of barrying deuterium because the mechanical properties of the layered films are improved visibly by the ductile interlayer Au and the interdiffusion between Au and 316L substratc is hindered by Al2O3 layer, so Au can give full play to barry deuterium. The study shows that layered films like precious metal integrated with ceramics is a new way in the domain of tritium permeation barrier development.%采用磁控溅射法在316L不锈钢基体上分别沉积单层Al2O3,膜、单层Au膜以及Al2O3/Au/Al2O3层状薄膜。采用气相渗透法在500℃,氘分压为0.06MPa条件下测试了薄膜的阻氘性能。结果表明,3种薄膜氘渗透后,薄膜的形貌良好,无开裂、无剥落的现象,氘渗透率减低因子均比316L不锈钢基材增大一个数量级以上,阻氘效能按单层Al2O3,膜、单层Au膜以及Al2O3/Au/Al2O3层状薄膜依次递升。Al2O3/Au/Al2O3层状薄膜的优异阻氘效能可归因于,延性的Au夹层使层状薄膜的力学性能得到显著提高;Al2O3层能阻止Au与基体间互扩散,使Au能充分发挥阻氘效能。本研究表明,由贵金属与陶瓷阻氚材料构成的层状薄膜是发展阻氚涂层的新途径。

  1. Persistent photoconductivity in AlGaN/GaN heterojunction channels caused by the ionization of deep levels in the AlGaN barrier layer

    Energy Technology Data Exchange (ETDEWEB)

    Murayama, H.; Akiyama, Y.; Niwa, R.; Sakashita, H.; Sakaki, H. [Toyota Technological Institute, 2-12-1 Hisakata, Tempaku-ku, Nagoya 468-8511 (Japan); Kachi, T. [Toyota Central R and D Labs., Inc., 41-1 Yokomichi, Nagakute, Aichi 480-1192 (Japan); Sugimoto, M. [Toyota Motor Corporation, 543 Kirigahora, Nishihirose-cho, Toyota, Aichi 470-0309 (Japan)

    2013-12-04

    Time-dependent responses of drain current (I{sub d}) in an AlGaN/GaN HEMT under UV (3.3 eV) and red (2.0 eV) light illumination have been studied at 300 K and 250 K. UV illumination enhances I{sub d} by about 10 %, indicating that the density of two-dimensional electrons is raised by about 10{sup 12} cm{sup −2}. When UV light is turned off at 300 K, a part of increased I{sub d} decays quickly but the other part of increment is persistent, showing a slow decay. At 250 K, the majority of increment remains persistent. It is found that such a persistent increase of I{sub d} at 250 K can be partially erased by the illumination of red light. These photo-responses are explained by a simple band-bending model in which deep levels in the AlGaN barrier get positively charged by the UV light, resulting in a parabolic band bending in the AlGaN layer, while some potion of those deep levels are neutralized by the red light.

  2. SEMICONDUCTOR DEVICES: Analytical charge control model for AlGaN/GaN MIS-HFETs including an undepleted barrier layer

    Science.gov (United States)

    Shenghui, Lu; Jiangfeng, Du; Qian, Luo; Qi, Yu; Wei, Zhou; Jianxin, Xia; Mohua, Yang

    2010-09-01

    An analytical charge control model considering the insulator/AlGaN interface charge and undepleted Al-GaN barrier layer is presented for AlGaN/GaN metal-insulator-semiconductor heterostructure field effect transistors (MIS-HFETs) over the entire operation range of gate voltage. The whole process of charge control is analyzed in detail and partitioned into four regions: I—full depletion, II—partial depletion, III—neutral region and IV—electron accumulation at the insulator/AlGaN interface. The results show that two-dimensional electron gas (2DEG) saturates at the boundary of region II/III and the gate voltage should not exceed the 2DEG saturation voltage in order to keep the channel in control. In addition, the span of region II accounts for about 50% of the range of gate voltage before 2DEG saturates. The good agreement of the calculated transfer characteristic with the measured data confirms the validity of the proposed model.

  3. Electronic properties of GaSe, InSe, GaS and GaTe layered semiconductors: charge neutrality level and interface barrier heights

    Science.gov (United States)

    Brudnyi, V. N.; Sarkisov, S. Yu; Kosobutsky, A. V.

    2015-11-01

    Density functional theory calculations have been applied to study the structural and electronic properties of layered ɛ-GaSe, γ-InSe, β-GaS and GaTe compounds. The optimized lattice parameters have been obtained using vdW-DF2-C09 exchange-correlation functional, which is able to describe dispersion forces and produces interlayer distances in close agreement with experiments. Based on the calculated electronic band structures, the energy position of the charge neutrality level (CNL) in the III-VI semiconductors has been estimated for the first time. The room-temperature values of CNL are found to be 0.80 eV, 1.02 eV, 0.72 eV and 0.77 eV for ɛ-GaSe, β-GaS, GaTe and γ-InSe, respectively. The persistent p-type conductivity of the intentionally undoped ɛ-GaSe, β-GaS and GaTe and n-type conductivity of γ-InSe crystals are discussed and explained using the concept of CNL. We also estimated the barrier heights for a number of metal/semiconductor and semiconductor/semiconductor interfaces assuming partial Fermi level pinning at the CNL. A reasonable agreement between our calculations and the available experimental data has been obtained.

  4. Influence of the Thickness of the Barrier Layer in Nanoheterostructures and the Gate-Drain Capacitance on the Microwave and Noise Parameters of Field-Effect AlGaN/GaN HEMT

    Science.gov (United States)

    Mikhaylovich, S. V.; Fedorov, Yu. V.

    2016-07-01

    We perform a computational and analytical study of how the thickness of the barrier layer in nanoheterostructures and the gate-drain capacitance C gd influence the microwave parameters (limiting frequency of current amplification and maximum generation frequency) and noise parameters (noise factor) of a field-effect AlGaN/GaN high electron mobility transistor. The results of complex measurements of the parameters of such transistors based on nanoheterostructures with a barrier layer thickness of 3.5-15.7 nm, which were performed within the framework of four technological routes in the range 0.1-67 GHz, are presented. It is shown that in order to reduce the noise ratio and improve the microwave parameters, it is necessary to optimize both the parameters of nanoheterostructures and the manufacturing techniques. In particular, the thickness of the barrier layer should be reduced, and the gate length should be chosen such as to maximize the product of the squared maximum current amplification frequency in the interior of the transistor and the output impedance between the drain and the source. Additionally, attention should be given to the shape of the gate to reduce the capacitance C gd. Under certain conditions of manufacture of nitride field-effect HEMT, one can achieve a lower noise factor compared with the transistors based on arsenide nanoheterostructures.

  5. Enhancement of NOx removal performance for (La0.85Sr0.15)0.99MnO3/Ce0.9Gd0.1O1.95 electrochemical cells by NOx storage/reduction adsorption layers

    DEFF Research Database (Denmark)

    Shao, Jing; Kammer Hansen, Kent

    2013-01-01

    This study investigated the effect of adding a NOx adsorption layer to the cathode of an electrochemical cell on the removal of NOx from gaseous mixtures. The cathode was a composite of (La0.85Sr0.15)0.99MnO3 (LSM15) and Ce0.9Gd0.1O1.95 (CGO10). Two different kinds of adsorption layers, K–Pt–Al2O...

  6. Barrier-oxide layer engineering of TiO{sub 2} nanotube arrays to get single- and multi-stage Y-branched nanotubes: Effect of voltage ramping and electrolyte conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Anitha, V.C. [School of Mechanical Engineering, Yeungnam University, Gyeongsan 712-749 (Korea, Republic of); Banerjee, Arghya Narayan, E-mail: arghya@ynu.ac.kr [School of Mechanical Engineering, Yeungnam University, Gyeongsan 712-749 (Korea, Republic of); Joo, Sang Woo, E-mail: swjoo@yu.ac.kr [School of Mechanical Engineering, Yeungnam University, Gyeongsan 712-749 (Korea, Republic of); Min, Bong Ki [Center for Research Facilities, Yeungnam University, Gyeongsan 712-749 (Korea, Republic of)

    2015-05-15

    Highlights: • Single and multi-stage Y-branched TiO{sub 2} nanotube arrays fabricated successfully. • Effect of voltage ramping down process on the branching of nanotube revealed. • Unequal interfacial movement across barrier layer of nanotubes manifests branching. • By controlling thinning of barrier oxide layer different morphologies of TNAs fabricated. • Y-branched, stacked double layer, mixture of broken/branched and multi-branched TNAs formed. - Abstract: Single and multi-stage Y-branched TiO{sub 2} nanotube arrays (TNAs) have been fabricated by a voltage ramping down process using potentiostatic two-step anodization in 0.5 wt% hydrofluoric acid (HF)/glycerol (1:2 volume ratio) electrolyte. Initially, the voltage is kept at 40 V for 3 h and then it is ramped down to different voltages (e.g. 30 V, 34 V, 36 V, 38 V and 39 V) at a ramping rate of either −1.0 V s{sup −1} or −0.5 V s{sup −1} in one time and two-time aged electrolytes. The growth mechanism of Y-branching of TNAs is modeled and explained in terms of unequal interfacial movements of the two interfaces across the barrier oxide layer (BOL) under non-steady-state growth regime. The ‘pinched off’ area of the BOL at the nanotube propagation front can be controlled effectively with the relative ramping voltage levels and electrolyte's conductivity to obtain Y-branched TNAs.

  7. Effect of Infiltration Material on a LSM15/CGO10 Electrochemical Reactor in the Electrochemical Oxidation of Propene

    DEFF Research Database (Denmark)

    Ippolito, Davide; Kammer Hansen, Kent

    2013-01-01

    The effect of infiltrating on a La0.85Sr0.15MnO3/Ce0.9Gd0.1O1.95 11-layer electrochemical reactor with CeO2 and Ce0.8Pr0.2O2−δ was studied in propene oxidation at open-circuit voltage and under polarization as a function of reaction temperature. This work outlined the importance of catalytic...... conductor, like Ce0.8Pr0.2O2−δ , increased the electrode performance at low temperature but decreased the lifetime of the oxygen ion promoters on the catalyst/electrode surface, reducing the faradaic efficiency of the reaction. The infiltration of CeO2 provided high propene conversion at open circuit...

  8. Encapsulation of Cu(InGa)Se{sub 2} solar cell with Al{sub 2}O{sub 3} thin-film moisture barrier grown by atomic layer deposition

    Energy Technology Data Exchange (ETDEWEB)

    Carcia, P.F.; McLean, R.S. [DuPont Research and Development, Experimental Station, Wilmington, DE 19880-0400 (United States); Hegedus, Steven [Institute of Energy Conversion, University of Delaware, Newark, DE 19716-3820 (United States)

    2010-12-15

    We compared the moisture sensitivity of a Cu(InGa)Se{sub 2} (CIGS) photovoltaic cell protected by 55 nm thick Al{sub 2}O{sub 3}, grown by atomic layer deposition (ALD), with equivalent CIGS cells protected with a glass or a polyester lid. Aging studies for more than 1000 h at 85 C/85% relative humidity with simulated solar illumination showed that the ALD Al{sub 2}O{sub 3} thin-film barrier provided superior moisture protection for the CIGS cell, i.e. no reduction in open circuit voltage or fill factor occurred, compared to cells protected with a glass or plastic lid. We concluded that a moisture barrier grown by ALD could have broad applicability as a strategy for extending the lifetime of flexible CIGS cells. (author)

  9. In Situ Ramp Anneal X-ray Diffraction Study of Atomic Layer Deposited Ultrathin TaN and Ta 1-x Al x N y Films for Cu Diffusion Barrier Applications

    Energy Technology Data Exchange (ETDEWEB)

    Consiglio, S.; Dey, S.; Yu, K.; Tapily, K.; Clark, R. D.; Hasegawa, T.; Wajda, C. S.; Leusink, G. J.; Diebold, A. C.

    2016-01-01

    Ultrathin TaN and Ta1-xAlxNy films with x = 0.21 to 0.88 were deposited by atomic layer deposition (ALD) and evaluated for Cu diffusion barrier effectiveness compared to physical vapor deposition (PVD) grown TaN. Cu diffusion barrier effectiveness was investigated using in-situ ramp anneal synchrotron X-ray diffraction (XRD) on Cu/1.8 nm barrier/Si stacks. A Kissinger-like analysis was used to assess the kinetics of Cu3Si formation and determine the effective activation energy (Ea) for Cu silicidation. Compared to the stack with a PVD TaN barrier, the stacks with the ALD films exhibited a higher crystallization temperature (Tc) for Cu silicidation. The Ea values of Cu3Si formation for stacks with the ALD films were close to the reported value for grain boundary diffusion of Cu whereas the Ea of Cu3Si formation for the stack with PVD TaN is closer to the reported value for lattice diffusion. For 3 nm films, grazing incidence in-plane XRD showed evidence of nanocrystallites in an amorphous matrix with broad peaks corresponding to high density cubic phase for the ALD grown films and lower density hexagonal phase for the PVD grown film further elucidating the difference in initial failure mechanisms due to differences in barrier crystallinity and associated phase.

  10. Analyses of 2-DEG characteristics in GaN HEMT with AlN/GaN super-lattice as barrier layer grown by MOCVD.

    Science.gov (United States)

    Xu, Peiqiang; Jiang, Yang; Chen, Yao; Ma, Ziguang; Wang, Xiaoli; Deng, Zhen; Li, Yan; Jia, Haiqiang; Wang, Wenxin; Chen, Hong

    2012-02-20

    GaN-based high-electron mobility transistors (HEMTs) with AlN/GaN super-lattices (SLs) (4 to 10 periods) as barriers were prepared on (0001) sapphire substrates. An innovative method of calculating the concentration of two-dimensional electron gas (2-DEG) was brought up when AlN/GaN SLs were used as barriers. With this method, the energy band structure of AlN/GaN SLs was analyzed, and it was found that the concentration of 2-DEG is related to the thickness of AlN barrier and the thickness of the period; however, it is independent of the total thickness of the AlN/GaN SLs. In addition, we consider that the sheet carrier concentration in every SL period is equivalent and the 2-DEG concentration measured by Hall effect is the average value in one SL period. The calculation result fitted well with the experimental data. So, we proposed that our method can be conveniently applied to calculate the 2-DEG concentration of HEMT with the AlN/GaN SL barrier.

  11. In-situ fabrication of MoSi2/SiC-Mo2C gradient anti-oxidation coating on Mo substrate and the crucial effect of Mo2C barrier layer at high temperature

    Science.gov (United States)

    Liu, Jun; Gong, Qianming; Shao, Yang; Zhuang, Daming; Liang, Ji

    2014-07-01

    MoSi2/SiC-Mo2C gradient coating on molybdenum was in situ prepared with pack cementation process by two steps: (1) carburizing with graphite powder to obtain a Mo2C layer on Mo substrate, and (2) siliconizing with Si powder to get a composite MoSi2/SiC layer on the upper part of Mo2C layer. The microstructure and elemental distribution in the coating were investigated with scanning electron microscopy (SEM), back scattered electron (BSE), energy dispersive spectroscopy (EDS), electron probe microanalysis (EPMA) and X-ray diffraction (XRD). Cyclic oxidation tests (at 500 °C, 1200 °C, 1400 °C and 1600 °C) demonstrated excellent oxidation resistance for the gradient composite coating and the mass loss was only 0.23% in 60 min at 1600 °C. XRD, EPMA, thermal dynamic and phase diagram analyses indicated that the Mo2C barrier layer played the key role in slowing down the diffusion of C and Si toward inner Mo substrate at high temperature and principally this contributed to the excellent anti-oxidation for Mo besides the outer MoSi2/SiC composite layer.

  12. In-situ fabrication of MoSi{sub 2}/SiC–Mo{sub 2}C gradient anti-oxidation coating on Mo substrate and the crucial effect of Mo{sub 2}C barrier layer at high temperature

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jun [School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Key Laboratory for Advanced Materials Processing Technology, Ministry of Education, Beijing 100084 (China); State Key Laboratory of New Ceramics and Fine Processing, Beijing 100084 (China); Gong, Qianming, E-mail: gongqianming@mail.tsinghua.edu.cn [School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Key Laboratory for Advanced Materials Processing Technology, Ministry of Education, Beijing 100084 (China); State Key Laboratory of New Ceramics and Fine Processing, Beijing 100084 (China); Shao, Yang; Zhuang, Daming [School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Key Laboratory for Advanced Materials Processing Technology, Ministry of Education, Beijing 100084 (China); State Key Laboratory of New Ceramics and Fine Processing, Beijing 100084 (China); Liang, Ji [Key Laboratory for Advanced Materials Processing Technology, Ministry of Education, Beijing 100084 (China); Department of Mechanical Engineering, Tsinghua University, Beijing 100084 (China)

    2014-07-01

    MoSi{sub 2}/SiC–Mo{sub 2}C gradient coating on molybdenum was in situ prepared with pack cementation process by two steps: (1) carburizing with graphite powder to obtain a Mo{sub 2}C layer on Mo substrate, and (2) siliconizing with Si powder to get a composite MoSi{sub 2}/SiC layer on the upper part of Mo{sub 2}C layer. The microstructure and elemental distribution in the coating were investigated with scanning electron microscopy (SEM), backscattered electron (BSE), energy dispersive spectroscopy (EDS), electron probe microanalysis (EPMA) and X-ray diffraction (XRD). Cyclic oxidation tests (at 500 °C, 1200 °C, 1400 °C and 1600 °C) demonstrated excellent oxidation resistance for the gradient composite coating and the mass loss was only 0.23% in 60 min at 1600 °C. XRD, EPMA, thermal dynamic and phase diagram analyses indicated that the Mo{sub 2}C barrier layer played the key role in slowing down the diffusion of C and Si toward inner Mo substrate at high temperature and principally this contributed to the excellent anti-oxidation for Mo besides the outer MoSi{sub 2}/SiC composite layer.

  13. Barrier mechanisms in the Drosophila blood-brain barrier

    Directory of Open Access Journals (Sweden)

    Samantha Jane Hindle

    2014-12-01

    Full Text Available The invertebrate blood-brain barrier field is growing at a rapid pace and, in recent years, studies have shown a physiologic and molecular complexity that has begun to rival its vertebrate counterpart. Novel mechanisms of paracellular barrier maintenance through GPCR signaling were the first demonstrations of the complex adaptive mechanisms of barrier physiology. Building upon this work, the integrity of the invertebrate blood-brain barrier has recently been shown to require coordinated function of all layers of the compound barrier structure, analogous to signaling between the layers of the vertebrate neurovascular unit. These findings strengthen the notion that many blood-brain barrier mechanisms are conserved between vertebrates and invertebrates, and suggest that novel findings in invertebrate model organisms will have a significant impact on the understanding of vertebrate BBB functions. In this vein, important roles in coordinating localized and systemic signaling to dictate organism development and growth are beginning to show how the blood-brain barrier can govern whole animal physiologies. This includes novel functions of blood-brain barrier gap junctions in orchestrating synchronized neuroblast proliferation, and of blood-brain barrier secreted antagonists of insulin receptor signaling. These advancements and others are pushing the field forward in exciting new directions. In this review, we provide a synopsis of invertebrate blood-brain barrier anatomy and physiology, with a focus on insights from the past 5 years, and highlight important areas for future study.

  14. Modeling Kinetics of Distortion in Porous Bi-layered Structures

    DEFF Research Database (Denmark)

    Tadesse Molla, Tesfaye; Frandsen, Henrik Lund; Bjørk, Rasmus;

    2013-01-01

    Shape distortions during constrained sintering experiment of bi-layer porous and dense cerium gadolinium oxide (CGO) structures have been modeled. Technologies like solid oxide fuel cells require co-firing thin layers with different green densities, which often exhibit differential shrinkage...... because of different sintering rates of the materials resulting in undesired distortions of the component. An analytical model based on the continuum theory of sintering has been developed to describe the kinetics of densification and distortion in the sintering processes. A new approach is used...... to extract the material parameters controlling shape distortion through optimizing the model to experimental data of free shrinkage strains. The significant influence of weight of the sample (gravity) on the kinetics of distortion is taken in to consideration. The modeling predictions indicate good agreement...

  15. Highly (110)- and (111)-oriented BiFeO3 films on BaPbO3 electrode with Ru or Pt /Ru barrier layers

    Science.gov (United States)

    Lee, Chia-Ching; Wu, Jenn-Ming; Hsiung, Chang-Po

    2007-04-01

    Highly (110)- and (111)-oriented BiFeO3 (BFO) films were fabricated with BaPbO3 (BPO )/Ru and BPO /Pt/Ru as electrode/barrier on Si substrates by rf-magnetron sputtering. The BPO /Ru and BPO /Pt/Ru stacks both induce oriented BFO films and act as diffusion barriers. The (110)- and (111)-oriented BFO films possess excellent ferroelectric properties with only minor leakage. The values of remnant polarization are almost the same, about 42μC/cm2, for (110)- and (111)-oriented BFO films. However, polarization measured under varying pulse widths demonstrates that the switching polarization in (111)-oriented BFO films is higher than in (110)-oriented films. Additionally, (111)-oriented BFO films exhibit better retention properties than (110)-oriented films.

  16. Performance improvement of GaN-based near-UV LEDs with InGaN/AlGaN superlattices strain relief layer and AlGaN barrier

    Science.gov (United States)

    Jia, Chuanyu; Yu, Tongjun; Feng, Xiaohui; Wang, Kun; Zhang, Guoyi

    2016-09-01

    The carrier confinement effect and piezoelectric field-induced quantum-confined stark effect of different GaN-based near-UV LED samples from 395 nm to 410 nm emission peak wavelength were investigated theoretically and experimentally. It is found that near-UV LEDs with InGaN/AlGaN multiple quantum wells (MQWs) active region have higher output power than those with InGaN/GaN MQWs for better carrier confinement effect. However, as emission peak wavelength is longer than 406 nm, the output power of the near-UV LEDs with AlGaN barrier is lower than that of the LEDs with GaN barrier due to more serious spatial separation of electrons and holes induced by the increase of piezoelectric field. The N-doped InGaN/AlGaN superlattices (SLs) were adopted as a strain relief layer (SRL) between n-GaN and MQWs in order to suppress the polarization field. It is demonstrated the output power of near-UV LEDs is increased obviously by using SLs SRL and AlGaN barrier for the discussed emission wavelength range. Besides, the forward voltage of near-UV LEDs with InGaN/AlGaN SLs SRL is lower than that of near-UV LEDs without SRL.

  17. In situ characterization of delamination and crack growth of a CGO–LSM multi-layer ceramic sample investigated by X-ray tomographic microscopy

    DEFF Research Database (Denmark)

    Bjørk, Rasmus; Esposito, Vincenzo; Lauridsen, Erik Mejdal;

    2014-01-01

    The densification, delamination and crack growth behavior in a Ce0.9Gd0.1O1.95 (CGO) and (La0.85Sr0.15)0.9MnO3 (LSM) multi-layer ceramic sample was studied using in situ X-ray tomographic microscopy (microtomography) to investigate the critical dynamics of crack propagation and delamination...... in a multilayered sample. Naturally occurring defects, caused by the sample preparation process, are shown not to be critical in sample degradation. Instead defects are nucleated during the debinding step. Crack growth is significantly faster along the material layers than perpendicular to them, and crack growth...

  18. Optimization of MoSe{sub 2} formation for Cu(In,Ga)Se{sub 2}-based solar cells by using thin superficial molybdenum oxide barrier layers

    Energy Technology Data Exchange (ETDEWEB)

    Duchatelet, A., E-mail: aurelien.duchatelet@edf.fr [Institute of Research and Development on Photovoltaic Energy (IRDEP), UMR 7174 EDF-CNRS-Chimie ParisTech, 6 quai Watier 78401, Chatou Cedex (France); Savidand, G. [Institute of Research and Development on Photovoltaic Energy (IRDEP), UMR 7174 EDF-CNRS-Chimie ParisTech, 6 quai Watier 78401, Chatou Cedex (France); Vannier, R.N. [Unité de Catalyse et Chimie du Solide (UCCS), UMR 8181, Ecole Nationale Supérieure de Chimie de Lille, Bat C7a-BP 90108, F-59652, Villeneuve d' Ascq (France); Lincot, D., E-mail: Daniel-Lincot@chimie-paristech.fr [Institute of Research and Development on Photovoltaic Energy (IRDEP), UMR 7174 EDF-CNRS-Chimie ParisTech, 6 quai Watier 78401, Chatou Cedex (France)

    2013-10-31

    During the formation of Cu(In,Ga)Se{sub 2} thin films deposited on Mo substrate by the selenization of Cu-In-Ga precursor, the reaction of Mo with Se can lead to a high consumption of Mo back contact and the formation of a thick MoSe{sub 2} layer, thus deteriorating the electrical properties of the back contact. In this study, the effect of thermal oxidation pre-treatment on Mo has been investigated to control the growth of MoSe{sub 2}. It has been demonstrated that a thin and covering MoO{sub 2} layer can block the selenization of Mo. Using this effect, a MoSe{sub 2} layer with controlled thickness can be formed by adding a thin and controlled Mo layer on top of an oxidized Mo substrate. In this configuration, only the Mo added on top of oxidized Mo forms MoSe{sub 2} and the whole Mo protected by MoO{sub 2} remains after selenization. Thanks to this Glass/Mo/MoO{sub 2}/Mo substrate configuration and the metallic behavior of MoO{sub 2}, the good electrical properties of the back contact are kept after selenization. - Highlights: • Selenization of Cu-In-Ga on Mo substrate produces thick detrimental MoSe{sub 2} layer. • MoO{sub 2} layer on Mo surface blocks MoSe{sub 2} formation. • Mo layer on top of MoO{sub 2}/Mo substrate enables to control MoSe{sub 2}.

  19. Fabrication of double barrier structures in single layer c-Si-QDs/a-SiOx films for realization of energy selective contacts for hot carrier solar cells

    Science.gov (United States)

    Kar, Debjit; Das, Debajyoti

    2017-01-01

    Thin films of c-Si-QDs embedded in an a-SiOx dielectric matrix forming arrays of double barrier structures have been fabricated by reactive rf-magnetron sputtering at ˜400 °C, without post-deposition annealing. The formation of larger size c-Si-QDs of reduced number density in homogeneous distribution within a less oxygenated a-SiOx matrix at higher plasma pressure introduces systematic widening of the average periodic distance between the adjacent `c-Si-QDs in a-SiOx', as obtained by X-ray reflectivity and transmission electron microscopy studies. A wave-like pattern in the J-E characteristics identifies the formation of periodic double-barrier structures along the path of the movement of charge carriers across the QDs and that those are originated by the a-SiOx dielectric matrix around the c-Si-QDs. A finite distribution of the size of c-Si-QDs introduces a broadening of the current density peak and simultaneously originates the negative differential resistance-like characteristics, which have suitable applications in the energy selective contacts that act as energy filters for hot carrier solar cells. A simple yet effective process technology has been demonstrated. Further initiative on tuning the energy selectivity by reducing the size and narrowing the size-distribution of Si-QDs can emerge superior energy selective contacts for hot carrier solar cells, paving ground for accomplishing all-Si solar cells.

  20. Study on Inter-Diffusion Barrier Layer between PZT Pyroelectric Thick Film and Si Substrate%PZT厚膜与Si衬底互扩散阻挡层研究

    Institute of Scientific and Technical Information of China (English)

    陈冲; 吴传贵; 彭强祥; 罗文博; 张万里; 王书安

    2013-01-01

    在Pt/Ti/SiO2/Si基片上,利用电泳沉积制备PZT热释电厚膜材料.为防止Pb和Si互扩散,在Pt底电极与SiO2/Si衬底间通过直流磁控溅射制备了TiOx薄膜阻挡层.对具有0、300 nm和500 nm TiOx阻挡层的PZT厚膜材料用SEM和能量色散谱仪(EDS)表征了Pb和Si互扩散情况,用动态热释电系数测量仪测试了热释电系数.结果表明,当TiOx阻挡层为500 nm时,可阻挡Pb和Si互扩散,热释电性能最好.热释电系数p=1.5×10-8 C·cm-2·K-1,相对介电常数εr=170,损耗角正切tanδ=0.02,探测度优值因子Fd=1.05×10-5pa-0.5.%PZT thick film as pyroelectric material has been prepared on the Pt/Ti/SiCK/Si substrate by using the electrophoresis deposition (EPD) method. In order to prevent the inter-diffusion between Pb and Si,a TiOx film barrier layer between Pt bottom electrode and SiO2/Si substrate has been prepared by using the DC magnetron sputtering method. The inter-diffusion between Pb and Si in PZT thick film material with TiO, barrier layer thickness of 0, 300 nm and 500 nm respectively have been characterized by SEM and EDS. The pyroelectric coefficient has been measured by the dynamic pyroelectric coefficient instrument. The results show that the inter-diffusion between Pb and Si can be blocked when the thickness of TiOx barrier layer is 500 nm and have the best pyroelectric properties. The pyroelectric coefficient, relative dielectric constant,dielectric loss and detectivity figure of merit are p=1. 5 × 10-8C · cm-2k-1 ,εr = 170,tan 8=0. 02 and Fd = 1. 05 × 10-5 Pa-0.5 respectively.

  1. Intragranular Cracking as a Critical Barrier For High-voltage Usage of Layer-structured Cathode for Lithium-ion Batteries

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Pengfei; Zheng, Jianming; Gu, Meng; Xiao, Jie; Zhang, Jiguang; Wang, Chongmin

    2017-01-16

    LiNi1/3Mn1/3Co1/3O2 (NMC333) layered cathode is often fabricated as secondary particles of consisting of densely packed primary particles, which offers advantage of high energy density and alleviation of cathode side reactions/corrosions, but introduces other drawbacks, such as intergranular cracking. Here, we report unexpected observations on the nucleation and growth of intragranular cracks in the commercial NMC333 layered cathode by using advanced S/TEM. We found that the formation of the intragranular cracks is directly associated with high voltage cycling, which is an electrochemically driven and diffusion controlled process. The intragranular cracks were noticed to be characteristically initiated from grain interior, a consequence of dislocation based crack incubation mechanism. This observation is in sharp contrast with the general theoretical models, predicting the initiation of intragranular cracks from grain boundaries or particle surface. Our study indicates that maintain a structural stability is the key step toward high voltage operation of layered cathode materials.

  2. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier

    Science.gov (United States)

    Shin, Byungha; Zhu, Yu; Bojarczuk, Nestor A.; Jay Chey, S.; Guha, Supratik

    2012-07-01

    We have examined Cu2ZnSnSe4 (CZTSe) solar cells prepared by thermal co-evaporation on Mo-coated glass substrates followed by post-deposition annealing under Se ambient. We show that the control of an interfacial MoSe2 layer thickness and the introduction of an adequate Se partial pressure (PSe) during annealing are essential to achieve high efficiency CZTSe solar cells—a reverse correlation between device performance and MoSe2 thickness is observed, and insufficient PSe leads to the formation of defects within the bandgap as revealed by photoluminescence measurements. Using a TiN diffusion barrier, we demonstrate 8.9% efficiency CZTSe devices with a long lifetime of photo-generated carriers.

  3. Influence of Electrode Design and Contacting Layers on Performance of Electrolyte Supported SOFC/SOEC Single Cells

    Directory of Open Access Journals (Sweden)

    Mihails Kusnezoff

    2016-11-01

    Full Text Available The solid oxide cell is a basis for highly efficient and reversible electrochemical energy conversion. A single cell based on a planar electrolyte substrate as support (ESC is often utilized for SOFC/SOEC stack manufacturing and fulfills necessary requirements for application in small, medium and large scale fuel cell and electrolysis systems. Thickness of the electrolyte substrate, and its ionic conductivity limits the power density of the ESC. To improve the performance of this cell type in SOFC/SOEC mode, alternative fuel electrodes, on the basis of Ni/CGO as well as electrolytes with reduced thickness, have been applied. Furthermore, different interlayers on the air side have been tested to avoid the electrode delamination and to reduce the cell degradation in electrolysis mode. Finally, the influence of the contacting layer on cell performance, especially for cells with an ultrathin electrolyte and thin electrode layers, has been investigated. It has been found that Ni/CGO outperform traditional Ni/8YSZ electrodes and the introduction of a ScSZ interlayer substantially reduces the degradation rate of ESC in electrolysis mode. Furthermore, it was demonstrated that, for thin electrodes, the application of contacting layers with good conductivity and adhesion to current collectors improves performance significantly.

  4. Determination of the Potential Barrier at the Metal/Oxide Interface in a Specular Spin Valve Structure with Nano-oxide Layers Using Electron Holography

    Institute of Scientific and Technical Information of China (English)

    王岩国; 沈峰; 张泽; 蔡建旺; 赖武彦

    2002-01-01

    The local potential distribution in a specular spin valve structure with nano-oxide layers has been mapped byusing off-axis electron holography in a field emission gun transmission electron microscope. A potential jumpof 3-4 V across the metal/oxide interface was detected for the first time. The presence of the potential barrierconfirms the formation of the metal/insulator/metal structure, which contributes to the increasing mean free pathof spin-polarized electrons via the specular reflection of spin-polarized electrons at the metal/oxide interface. Itleads to nearly double enhancement of the magnetoresistance ratio from 8% to 15%.

  5. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries

    Science.gov (United States)

    Yan, Pengfei; Zheng, Jianming; Gu, Meng; Xiao, Jie; Zhang, Ji-Guang; Wang, Chong-Min

    2017-01-01

    LiNi1/3Mn1/3Co1/3O2-layered cathode is often fabricated in the form of secondary particles, consisting of densely packed primary particles. This offers advantages for high energy density and alleviation of cathode side reactions/corrosions, but introduces drawbacks such as intergranular cracking. Here, we report unexpected observations on the nucleation and growth of intragranular cracks in a commercial LiNi1/3Mn1/3Co1/3O2 cathode by using advanced scanning transmission electron microscopy. We find the formation of the intragranular cracks is directly associated with high-voltage cycling, an electrochemically driven and diffusion-controlled process. The intragranular cracks are noticed to be characteristically initiated from the grain interior, a consequence of a dislocation-based crack incubation mechanism. This observation is in sharp contrast with general theoretical models, predicting the initiation of intragranular cracks from grain boundaries or particle surfaces. Our study emphasizes that maintaining structural stability is the key step towards high-voltage operation of layered-cathode materials.

  6. Nonlocal reflection by photonic barriers

    OpenAIRE

    Vetter, R. -M.; A. Haibel; Nimtz, G.

    2001-01-01

    The time behaviour of microwaves undergoing partial reflection by photonic barriers was measured in the time and in the frequency domain. It was observed that unlike the duration of partial reflection by dielectric layers, the measured reflection duration of barriers is independent of their length. The experimental results point to a nonlocal behaviour of evanescent modes at least over a distance of some ten wavelengths. Evanescent modes correspond to photonic tunnelling in quantum mechanics.

  7. Deep ultraviolet photodetectors based on p-Si/ i-SiC/ n-Ga2O3 heterojunction by inserting thin SiC barrier layer

    Science.gov (United States)

    An, Yuehua; Zhi, Yusong; Wu, Zhenping; Cui, Wei; Zhao, Xiaolong; Guo, Daoyou; Li, Peigang; Tang, Weihua

    2016-12-01

    Deep ultraviolet photodetectors based on p-Si/ n-Ga2O3 and p-Si/ i-SiC/ n-Ga2O3 heterojunctions were fabricated by laser molecular beam epitaxial (L-MBE), respectively. In compare with p-Si/ n-Ga2O3 heterostructure-based photodetector, the dark current of p-Si/ i-SiC/ n-Ga2O3-based photodetector decreased by three orders of magnitude, and the rectifying behavior was tuned from reverse to forward. In order to improve the quality of the photodetector, we reduced the oxygen vacancies of p-Si/ i-SiC/ n-Ga2O3 heterostructures by changing the oxygen pressure during annealing. As a result, the rectification ratio ( I F/ I R) of the fabricated photodetectors was 36 at 4.5 V and the photosensitivity was 5.4 × 105% under the 254 nm light illumination at -4.5 V. The energy band structure of p-Si/ n-Ga2O3 and p-Si/ i-SiC/ n-Ga2O3 heterostructures was schematic drawn to explain the physic mechanism of enhancement of the performance of p-Si/ i-SiC/ n-Ga2O3 heterostructure-based deep UV photodetector by introduction of SiC layer.

  8. Effect of the Si-doped In0.49Ga0.51P barrier layer on the device performance of In0.4Ga0.6As MOSFETs grown on semi-insulating GaAs substrates

    Institute of Scientific and Technical Information of China (English)

    Chang Hu-Dong; Sun Bing; Xue Bai-Qing; Liu Gui-Ming; Zhao Wei; Wang Sheng-Kai; Liu Hong-Gang

    2013-01-01

    In0.4Ga0.6As channel metal-oxide-semiconductor field-effect transistors (MOSFETs) with and without an Si-doped In0.49Ga0.51P barrier layer grown on semi-insulating GaAs substrates have been investigated for the first time.Compared with the In0.4Ga0.6As MOSFETs without an In0.49Ga0.51P barrier layer,In0.4Ga0.6As MOSFETs with an In0.49Ga0.51P barrier layer show higher drive current,higher transconductance,lower gate leakage current,lower subthreshold swing,and higher effective channel mobility.These In0.4Ga0.6As MOSFETs (gate length 2 μm) with an In0.49Ga0.s1P barrier layer exhibit a high drive current of 117 mA/mm,a high transconductance of 71.9 mS/mm,and a maximum effective channel mobility of 1266 cm2/(V·s).

  9. Free-Energy Barriers and Reaction Mechanisms for the Electrochemical Reduction of CO on the Cu(100) Surface, Including Multiple Layers of Explicit Solvent at pH 0.

    Science.gov (United States)

    Cheng, Tao; Xiao, Hai; Goddard, William A

    2015-12-03

    The great interest in the photochemical reduction from CO2 to fuels and chemicals has focused attention on Cu because of its unique ability to catalyze formation of carbon-containing fuels and chemicals. A particular goal is to learn how to modify the Cu catalysts to enhance the production selectivity while reducing the energy requirements (overpotential). To enable such developments, we report here the free-energy reaction barriers and mechanistic pathways on the Cu(100) surface, which produces only CH4 (not C2H4 or CH3OH) in acid (pH 0). We predict a threshold potential for CH4 formation of -0.52 V, which compares well to experiments at low pH, -0.45 to -0.50 V. These quantum molecular dynamics simulations included ∼5 layers of explicit water at the water/electrode interface using enhanced sampling methodology to obtain the free energies. We find that that chemisorbed hydroxyl-methylene (CH-OH) is the key intermediate determining the selectivity for methane over methanol.

  10. Plastic Schottky barrier solar cells

    Science.gov (United States)

    Waldrop, James R.; Cohen, Marshall J.

    1984-01-24

    A photovoltaic cell structure is fabricated from an active medium including an undoped, intrinsically p-type organic semiconductor comprising polyacetylene. When a film of such material is in rectifying contact with a magnesium electrode, a Schottky-barrier junction is obtained within the body of the cell structure. Also, a gold overlayer passivates the magnesium layer on the undoped polyacetylene film.

  11. Fracture mechanism of a thermal barrier coating

    Science.gov (United States)

    Samoilenko, V. M.; Ravilov, R. G.; Drevnyak, V. V.; Petrova, M. A.

    2016-06-01

    The fracture mechanism of the thermal barrier coating of gas turbine blades is studied. The causes of the fracture of the ceramic layer are discussed and the possible ways to increase the fatigue life of the thermal barrier coating are considered.

  12. Antimicrobial Peptides, Infections and the Skin Barrier

    DEFF Research Database (Denmark)

    Clausen, Maja-Lisa; Agner, Tove

    2016-01-01

    The skin serves as a strong barrier protecting us from invading pathogens and harmful organisms. An important part of this barrier comes from antimicrobial peptides (AMPs), which are small peptides expressed abundantly in the skin. AMPs are produced in the deeper layers of the epidermis...

  13. In vitro porcine blood-brain barrier model for permeability studies: pCEL-X software pKa(FLUX) method for aqueous boundary layer correction and detailed data analysis.

    Science.gov (United States)

    Yusof, Siti R; Avdeef, Alex; Abbott, N Joan

    2014-12-18

    In vitro blood-brain barrier (BBB) models from primary brain endothelial cells can closely resemble the in vivo BBB, offering valuable models to assay BBB functions and to screen potential central nervous system drugs. We have recently developed an in vitro BBB model using primary porcine brain endothelial cells. The model shows expression of tight junction proteins and high transendothelial electrical resistance, evidence for a restrictive paracellular pathway. Validation studies using small drug-like compounds demonstrated functional uptake and efflux transporters, showing the suitability of the model to assay drug permeability. However, one limitation of in vitro model permeability measurement is the presence of the aqueous boundary layer (ABL) resulting from inefficient stirring during the permeability assay. The ABL can be a rate-limiting step in permeation, particularly for lipophilic compounds, causing underestimation of the permeability. If the ABL effect is ignored, the permeability measured in vitro will not reflect the permeability in vivo. To address the issue, we explored the combination of in vitro permeability measurement using our porcine model with the pKa(FLUX) method in pCEL-X software to correct for the ABL effect and allow a detailed analysis of in vitro (transendothelial) permeability data, Papp. Published Papp using porcine models generated by our group and other groups are also analyzed. From the Papp, intrinsic transcellular permeability (P0) is derived by simultaneous refinement using a weighted nonlinear regression, taking into account permeability through the ABL, paracellular permeability and filter restrictions on permeation. The in vitro P0 derived for 22 compounds (35 measurements) showed good correlation with P0 derived from in situ brain perfusion data (r(2)=0.61). The analysis also gave evidence for carrier-mediated uptake of naloxone, propranolol and vinblastine. The combination of the in vitro porcine model and the software

  14. Fast spatial atomic layer deposition of Al{sub 2}O{sub 3} at low temperature (<100 °C) as a gas permeation barrier for flexible organic light-emitting diode displays

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Hagyoung; Shin, Seokyoon; Jeon, Hyeongtag, E-mail: hjeon@hanyang.ac.kr [Department of Materials Science and Engineering, Hanyang University, Seoul 133-791 (Korea, Republic of); Choi, Yeongtae; Kim, Junghun; Kim, Sanghun; Chung, Seog Chul; Oh, Kiyoung [LIG INVENIA Co., Ltd., Seongnam, Gyeonggi 462-807 (Korea, Republic of)

    2016-01-15

    The authors developed a high throughput (70 Å/min) and scalable space-divided atomic layer deposition (ALD) system for thin film encapsulation (TFE) of flexible organic light-emitting diode (OLED) displays at low temperatures (<100 °C). In this paper, the authors report the excellent moisture barrier properties of Al{sub 2}O{sub 3} films deposited on 2G glass substrates of an industrially relevant size (370 × 470 mm{sup 2}) using the newly developed ALD system. This new ALD system reduced the ALD cycle time to less than 1 s. A growth rate of 0.9 Å/cycle was achieved using trimethylaluminum as an Al source and O{sub 3} as an O reactant. The morphological features and step coverage of the Al{sub 2}O{sub 3} films were investigated using field emission scanning electron microscopy. The chemical composition was analyzed using Auger electron spectroscopy. These deposited Al{sub 2}O{sub 3} films demonstrated a good optical transmittance higher than 95% in the visible region based on the ultraviolet visible spectrometer measurements. Water vapor transmission rate lower than the detection limit of the MOCON test (less than 3.0 × 10{sup −3} g/m{sup 2} day) were obtained for the flexible substrates. Based on these results, Al{sub 2}O{sub 3} deposited using our new high-throughput and scalable spatial ALD is considered a good candidate for preparation of TFE films of flexible OLEDs.

  15. Role of SiNx Barrier Layer on the Performances of Polyimide Ga2O3-doped ZnO p-i-n Hydrogenated Amorphous Silicon Thin Film Solar Cells

    Directory of Open Access Journals (Sweden)

    Fang-Hsing Wang

    2014-02-01

    Full Text Available In this study, silicon nitride (SiNx thin films were deposited on polyimide (PI substrates as barrier layers by a plasma enhanced chemical vapor deposition (PECVD system. The gallium-doped zinc oxide (GZO thin films were deposited on PI and SiNx/PI substrates at room temperature (RT, 100 and 200 °C by radio frequency (RF magnetron sputtering. The thicknesses of the GZO and SiNx thin films were controlled at around 160 ± 12 nm and 150 ± 10 nm, respectively. The optimal deposition parameters for the SiNx thin films were a working pressure of 800 × 10−3 Torr, a deposition power of 20 W, a deposition temperature of 200 °C, and gas flowing rates of SiH4 = 20 sccm and NH3 = 210 sccm, respectively. For the GZO/PI and GZO-SiNx/PI structures we had found that the GZO thin films deposited at 100 and 200 °C had higher crystallinity, higher electron mobility, larger carrier concentration, smaller resistivity, and higher optical transmittance ratio. For that, the GZO thin films deposited at 100 and 200 °C on PI and SiNx/PI substrates with thickness of ~1000 nm were used to fabricate p-i-n hydrogenated amorphous silicon (α-Si thin film solar cells. 0.5% HCl solution was used to etch the surfaces of the GZO/PI and GZO-SiNx/PI substrates. Finally, PECVD system was used to deposit α-Si thin film onto the etched surfaces of the GZO/PI and GZO-SiNx/PI substrates to fabricate α-Si thin film solar cells, and the solar cells’ properties were also investigated. We had found that substrates to get the optimally solar cells’ efficiency were 200 °C-deposited GZO-SiNx/PI.

  16. Electrochemical reduction of NO with propene in the presence of oxygen on LSCoM/CGO porous cell stacks impregnated with BaO

    DEFF Research Database (Denmark)

    Friedberg, Anja Zarah; Kammer Hansen, Kent

    2015-01-01

    The electrochemical reduction of NO with propene in the presence of 10 % O2 was studied on a La0.85Sr0.15Co0.03Mn0.97O3-Ce0.9Gd0.1O1.95 11-layer electrochemical reactor. BaO was impregnated into the porous reactor, and electrochemical impedance spectroscopy was used for characterisation...

  17. Tantalum oxide barrier in magnetic tunnel junctions

    Institute of Scientific and Technical Information of China (English)

    Guanghua Yu; Tingting Ren; Wei Ji; Jiao Teng; Fengwu Zhu

    2004-01-01

    Tantalum as an insulating barrier can take the place of Al in magnetic tunnel junctions (MTJs). Ta barriers in MTJs were fabricated by natural oxidation. X-ray photoelectron spectroscopy (XPS) was used to characterize the oxidation states of Ta barrier.The experimental results show that the chemical state of tantalum is pure Ta5+ and the thickness of the oxide is 1.3 nm. The unoxidized Ta in the barrier may chemically reacted with NiFe layer which is usually used in MTJs to form an intermetallic compound,NiTa2. A magnetic "dead layer" could be produced in the NiFe/Ta interface. The "dead layer" is likely to influence the spinning electron transport and the magnetoresistance effect.

  18. Improved metallic and thermal barrier coatings

    Science.gov (United States)

    Stecura, S.

    1981-01-01

    Low thermal conductivity two layer ceramic coatings are efficient thermal barriers between cooled matallic components and high temperature combustion gases. Potential components are combustors, blades, and vanes in aircraft engines of power-generating turbines. Presence of two layer coatings greatly reduces temperature and coolant requirements.

  19. Numerical simulations of capillary barrier field tests

    Energy Technology Data Exchange (ETDEWEB)

    Morris, C.E. [Univ. of Wollongong (Australia); Stormont, J.C. [Univ. of New Mexico, Albuquerque, NM (United States)

    1997-12-31

    Numerical simulations of two capillary barrier systems tested in the field were conducted to determine if an unsaturated flow model could accurately represent the observed results. The field data was collected from two 7-m long, 1.2-m thick capillary barriers built on a 10% grade that were being tested to investigate their ability to laterally divert water downslope. One system had a homogeneous fine layer, while the fine soil of the second barrier was layered to increase its ability to laterally divert infiltrating moisture. The barriers were subjected first to constant infiltration while minimizing evaporative losses and then were exposed to ambient conditions. The continuous infiltration period of the field tests for the two barrier systems was modelled to determine the ability of an existing code to accurately represent capillary barrier behavior embodied in these two designs. Differences between the field test and the model data were found, but in general the simulations appeared to adequately reproduce the response of the test systems. Accounting for moisture retention hysteresis in the layered system will potentially lead to more accurate modelling results and is likely to be important when developing reasonable predictions of capillary barrier behavior.

  20. Filaggrin and Skin Barrier Function.

    Science.gov (United States)

    Kezic, Sanja; Jakasa, Ivone

    2016-01-01

    The skin barrier function is greatly dependent on the structure and composition of the uppermost layer of the epidermis, the stratum corneum (SC), which is made up of flattened anucleated cells surrounded by highly organized and continuous lipid matrix. The interior of the corneocytes consists mainly of keratin filaments aggregated by filaggrin (FLG) protein. Next, together with several other proteins, FLG is cross-linked into a mechanically robust cornified cell envelope providing a scaffold for the extracellular lipid matrix. In addition to its role for the SC structural and mechanical integrity, FLG degradation products account in part for the water-holding capacity and maintenance of acidic pH of the SC, both crucial for the epidermal barrier homoeostasis by regulating activity of multiple enzymes that control desquamation, lipid synthesis and inflammation. The major determinant of FLG expression in the skin are loss-of-function mutations in FLG, the strongest genetic risk factor for atopic dermatitis (AD), an inflammatory skin disease characterized by a reduced skin barrier function. The prevalence of FLG mutations varies greatly among different populations and ranges from about 10% in Northern Europeans to less than 1% in the African populations. An impaired skin barrier facilitates absorption of potentially hazardous chemicals, which might cause adverse effects in the skin, such as contact dermatitis, or systemic toxicity after their passage into blood. In another direction, a leaky epidermal barrier will lead to enhanced loss of water from the skin. A recent study has shown that even subtle increase in epidermal water loss in newborns increases the risk for AD. Although there are multiple modes of action by which FLG might affect skin barrier it is still unclear whether and how FLG deficiency leads to the reduced skin barrier function. This chapter summarizes the current knowledge in this field obtained from clinical studies, and animal and in vitro models

  1. Pratt & Whitney thermal barrier coatings

    Energy Technology Data Exchange (ETDEWEB)

    Bornstein, N. [United Technologies Research Center, East Hartford, CT (United States); Marcin, J. [Pratt & Whitney Aircraft Co., East Hartford, CT (United States)

    1995-10-01

    The objective of the Advanced Turbine Systems (ATS) Program is to develop ultra-high efficient, environmentally superior, and cost competitive gas turbine systems. The operating profiles of these industrial gas turbines are long, less cyclic with fewer transients-compared with those for aircraft gas turbine engines. Therefore, creep rather than thermal fatigue, becomes primary life-limiting for hot section components. Thermal barrier coatings (TBCs) will be used to achieve the objectives of the program. TBCs allow surface temperatures to increase without compromising the structural properties of the alloy. TBCs typically consist of a ceramic insulating layer, deposited onto the substrate with an intervening metallic layer, which imparts oxidation protection to the substrate and provides a surface to which the ceramic layer can adhere.

  2. Smart parking barrier

    KAUST Repository

    Alharbi, Abdulrazaq M.

    2016-05-06

    Various methods and systems are provided for smart parking barriers. In one example, among others, a smart parking barrier system includes a movable parking barrier located at one end of a parking space, a barrier drive configured to control positioning of the movable parking barrier, and a parking controller configured to initiate movement of the parking barrier, via the barrier drive. The movable parking barrier can be positioned between a first position that restricts access to the parking space and a second position that allows access to the parking space. The parking controller can initiate movement of the movable parking barrier in response to a positive identification of an individual allowed to use the parking space. The parking controller can identify the individual through, e.g., a RFID tag, a mobile device (e.g., a remote control, smartphone, tablet, etc.), an access card, biometric information, or other appropriate identifier.

  3. Search for Spin Filtering By Electron Tunneling Through Ferromagnetic EuS Barriers in Pbs

    Science.gov (United States)

    Figielski, T.; Morawski, A.; Wosinski, T.; Wrotek, S.; Makosa, A.; Lusakowska, E.; Story, T.; Sipatov, A. Yu.; Szczerbakow, A.; Grasza, K.; Curreri, Peter A. (Technical Monitor)

    2002-01-01

    Perpendicular transport through single- and double-barrier heterostructures consisting of ferromagnetic EuS layers embedded into PbS matrix was investigated. Manifestations of both resonant tunneling and spin filtering through EuS barrier have been observed.

  4. Planar doped barrier subharmonic mixers

    Science.gov (United States)

    Lee, T. H.; East, J. R.; Haddad, G. I.

    1992-01-01

    The Planar Doped Barrier (PDB) diode is a device consisting of a p(+) doping spike between two intrinsic layers and n(+) ohmic contacts. This device has the advantages of controllable barrier height, diode capacitance and forward to reverse current ratio. A symmetrically designed PDB has an anti-symmetric current vs. voltage characteristic and is ideal for use as millimeter wave subharmonic mixers. We have fabricated such devices with barrier heights of 0.3, 0.5 and 0.7 volts from GaAs and InGaAs using a multijunction honeycomb structure with junction diameters between one and ten microns. Initial RF measurements are encouraging. The 0.7 volt barrier height 4 micron GaAs devices were tested as subharmonic mixers at 202 GHz with an IF frequency of 1 GHz and had 18 dB of conversion loss. The estimated mismatch loss was 7 dB and was due to higher diode capacitance. The LO frequency was 100.5 GHz and the pump power was 8 mW.

  5. Physical based Schottky barrier diode modeling for THz applications

    DEFF Research Database (Denmark)

    Yan, Lei; Krozer, Viktor; Michaelsen, Rasmus Schandorph;

    2013-01-01

    In this work, a physical Schottky barrier diode model is presented. The model is based on physical parameters such as anode area, Ohmic contact area, doping profile from epitaxial (EPI) and substrate (SUB) layers, layer thicknesses, barrier height, specific contact resistance, and device...... temperature. The effects of barrier height lowering, nonlinear resistance from the EPI layer, and hot electron noise are all included for accurate characterization of the Schottky diode. To verify the diode model, measured I-V and C-V characteristics are compared with the simulation results. Due to the lack...

  6. Highly durable anode supported solid oxide fuel cell with an infiltrated cathode

    Science.gov (United States)

    Samson, Alfred Junio; Hjalmarsson, Per; Søgaard, Martin; Hjelm, Johan; Bonanos, Nikolaos

    2012-10-01

    An anode supported solid oxide fuel cell with an La0.6Sr0.4Co1.05O3-δ (LSC) infiltrated-Ce0.9Gd0.1O1.95 (CGO) cathode that shows a stable performance has been developed. The cathode was prepared by screen printing a porous CGO backbone on top of a laminated and co-fired anode supported half cell, consisting of a Ni-yttria stabilized zirconia (YSZ) anode support, a Ni-scandia-doped yttria-stabilized zirconia (ScYSZ) anode, a ScYSZ electrolyte, and a CGO barrier layer. LSC was introduced into the CGO backbone by multiple infiltrations of an aqueous nitrate solution followed by firing. The cell was tested at 700 °C under a current density of 0.5 A cm-2 for 1500 h using air as oxidant and humidified hydrogen as fuel. The electrochemical performance of the cell was analyzed by impedance spectroscopy and current-voltage relationships. No measurable degradation in the cell voltage or increase in the resistance from the recorded impedance was observed during long term testing. The power density reached 0.79 W cm-2 at a cell voltage of 0.6 V at 750 °C. Post test analysis of the LSC infiltrated-CGO cathode by scanning electron microscopy revealed no significant micro-structural difference to that of a nominally identical untested counterpart.

  7. Properties of native ultrathin aluminium oxide tunnel barriers

    CERN Document Server

    Gloos, K; Pekola, J P

    2003-01-01

    We have investigated planar metal-insulator-metal tunnel junctions with aluminium oxide as the dielectricum. These oxide barriers were grown on an aluminium electrode in pure oxygen at room temperature till saturation. By applying the Simmons model we derived discrete widths of the tunnelling barrier, separated by DELTA s approx 0.38 nm. This corresponds to the addition of single layers of oxygen atoms. The minimum thickness of s sub 0 approx 0.54 nm is then due to a double layer of oxygen. We found a strong and systematic dependence of the barrier height on the barrier thickness. Breakdown fields up to 5 GV m sup - sup 1 were reached. They decreased strongly with increasing barrier thickness. Electrical breakdown could be described by a metal-insulator like transition of the dielectric barrier due to the large density of tunnelling electrons.

  8. Fabrication of novel electrolyte-layer free fuel cell with semi-ionic conductor (Ba0.5Sr0.5Co0.8Fe0.2O3-δ- Sm0.2Ce0.8O1.9) and Schottky barrier

    Science.gov (United States)

    Afzal, Muhammad; Saleemi, Mohsin; Wang, Baoyuan; Xia, Chen; Zhang, Wei; He, Yunjuan; Jayasuriya, Jeevan; Zhu, Bin

    2016-10-01

    Perovskite Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) is synthesized via a chemical co-precipitation technique for a low temperature solid oxide fuel cell (LTSOFC) (300-600 °C) and electrolyte-layer free fuel cell (EFFC) in a comprehensive study. The EFFC with a homogeneous mixture of samarium doped ceria (SDC): BSCF (60%:40% by weight) which is rather similar to the cathode (SDC: BSCF in 50%:50% by weight) used for a three layer SOFC demonstrates peak power densities up to 655 mW/cm2, while a three layer (anode/electrolyte/cathode) SOFC has reached only 425 mW/cm2 at 550 °C. Chemical phase, crystal structure and morphology of the as-prepared sample are characterized by X-ray diffraction and field emission scanning electron microscopy coupled with energy dispersive spectroscopy. The electrochemical performances of 3-layer SOFC and EFFC are studied by electrochemical impedance spectroscopy (EIS). As-prepared BSCF has exhibited a maximum conductivity above 300 S/cm at 550 °C. High performance of the EFFC device corresponds to a balanced combination between ionic and electronic (holes) conduction characteristic. The Schottky barrier prevents the EFFC from the electronic short circuiting problem which also enhances power output. The results provide a new way to produce highly effective cathode materials for LTSOFC and semiconductor designs for EFFC functions using a semiconducting-ionic material.

  9. Extremal surface barriers

    Energy Technology Data Exchange (ETDEWEB)

    Engelhardt, Netta; Wall, Aron C. [Department of Physics, University of California,Santa Barbara, CA 93106 (United States)

    2014-03-13

    We present a generic condition for Lorentzian manifolds to have a barrier that limits the reach of boundary-anchored extremal surfaces of arbitrary dimension. We show that any surface with nonpositive extrinsic curvature is a barrier, in the sense that extremal surfaces cannot be continuously deformed past it. Furthermore, the outermost barrier surface has nonnegative extrinsic curvature. Under certain conditions, we show that the existence of trapped surfaces implies a barrier, and conversely. In the context of AdS/CFT, these barriers imply that it is impossible to reconstruct the entire bulk using extremal surfaces. We comment on the implications for the firewall controversy.

  10. Safety-barrier diagrams

    DEFF Research Database (Denmark)

    Duijm, Nijs Jan

    2007-01-01

    are discussed. A simple method for quantification of safety-barrier diagrams is proposed, including situations where safety barriers depend on shared common elements. It is concluded that safety-barrier diagrams provide a useful framework for an electronic data structure that integrates information from risk......Safety-barrier diagrams and the related so-called "bow-tie" diagrams have become popular methods in risk analysis. This paper describes the syntax and principles for constructing consistent and valid safety-barrier diagrams. The relation with other methods such as fault trees and Bayesian networks...... analysis with operational safety management....

  11. Hanford Permanent Isolation Barrier Program: Asphalt technology test plan

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, H.D.; Romine, R.A.

    1994-05-01

    The Hanford Permanent Isolation Barriers use engineered layers of natural materials to create an integrated structure with backup protective features. The objective of current designs is to develop a maintenance-free permanent barrier that isolates wastes for a minimum of 1000 years by limiting water drainage to near-zero amounts. Asphalt is being used as an impermeable water diversion layer to provide a redundant layer within the overall barrier design. Data on asphalt barrier properties in a buried environment are not available for the required 100-year time frame. The purpose of this test plan is to outline the activities planned to obtain data with which to estimate performance of the asphalt layers.

  12. Skin barrier in atopic dermatitis: beyond filaggrin*

    Science.gov (United States)

    Zaniboni, Mariana Colombini; Samorano, Luciana Paula; Orfali, Raquel Leão; Aoki, Valéria

    2016-01-01

    Atopic dermatitis is a chronic inflammatory skin disease with a complex pathogenesis, where changes in skin barrier and imbalance of the immune system are relevant factors. The skin forms a mechanic and immune barrier, regulating water loss from the internal to the external environment, and protecting the individual from external aggressions, such as microorganisms, ultraviolet radiation and physical trauma. Main components of the skin barrier are located in the outer layers of the epidermis (such as filaggrin), the proteins that form the tight junction (TJ) and components of the innate immune system. Recent data involving skin barrier reveal new information regarding its structure and its role in the mechanic-immunological defense; atopic dermatitis (AD) is an example of a disease related to dysfunctions associated with this complex. PMID:27579743

  13. Thin-film barrier on foil for organic LED lamps

    NARCIS (Netherlands)

    Assche, F.J.H. van; Rooms, H.C.A.; Young, E.W.A.; Michels, J.; Mol, A.M.B. van; Rietjens, G.; Weijer, P. van de; Bouten, P.

    2008-01-01

    Within the Holst centre a transparent barrier on foil has been under development which is based on low-temperature plasma deposited silicon nitride films as intrinsic moisture barrier, stacked with planarization layers to spatially separate defects in these films. OLED lifetime testing and water vap

  14. Healing particles in self-healing thermal barrier coatings

    NARCIS (Netherlands)

    Derelioglu, Z.; Anusuya Ponnusami, S.; Turteltaub, S.; Van der Zwaag, S.; Sloof, W.G.

    2013-01-01

    Crack healing in ceramic thermal barrier coatings (TBCs) may be realized by embedding Mo-Si based particles in the thermal barrier coating. Upon cracking, these particles are exposed to oxygen that permeates through the top layer and the crack gap is filled with SiO2 which is produced from oxidation

  15. Surface barrier research at the Hanford Site

    Energy Technology Data Exchange (ETDEWEB)

    Gee, G.W.; Ward, A.L.; Fayer, M.J. [Pacific Northwest National Lab., Richland, WA (United States)

    1997-12-31

    At the DOE Hanford Site, a field-scale prototype surface barrier was constructed in 1994 over an existing waste site as a part of a CERCLA treatability test. The above-grade barrier consists of a fine-soil layer overlying coarse layers of sands, gravels, basalt rock (riprap), and a low permeability asphalt layer. Two sideslope configurations, clean-fill gravel on a 10:1 slope and basalt riprap on a 2:1 slope, were built and are being tested. Design considerations included: constructability; drainage and water balance monitoring, wind and water erosion control and monitoring; surface revegetation and biotic intrusion; subsidence and sideslope stability, and durability of the asphalt layer. The barrier is currently in the final year of a three-year test designed to answer specific questions related to stability and long-term performance. One half of the barrier is irrigated such that the total water applied, including precipitation, is 480 mm/yr (three times the long-term annual average). Each year for the past two years, an extreme precipitation event (71 mm in 8 hr) representing a 1,000-yr return storm was applied in late March, when soil water storage was at a maximum. While the protective sideslopes have drained significant amounts of water, the soil cover (2-m of silt-loam soil overlying coarse sand and rock) has never drained. During the past year there was no measurable surface runoff or wind erosion. This is attributed to extensive revegetation of the surface. In addition, the barrier elevation has shown a small increase of 2 to 3 cm that is attributed to a combination of root proliferation and freeze/thaw activity. Testing will continue through September 1997. Performance data from the prototype barrier will be used by DOE in site-closure decisions at Hanford.

  16. Ta-Si-N/Ti双层结构扩散阻挡层的制备与表征%Preparation and characterization of bilayer Ta-Si-N/Ti diffusion barrier layer

    Institute of Scientific and Technical Information of China (English)

    邓鹏远; 瞿金凤

    2013-01-01

      采用射频磁控溅射的方法在Si(100)衬底和Cu膜间制备了Ta-Si-N(10nm)/Ti(20nm)双层结构的扩散阻挡层。Cu/Ta-Si-N/Ti/Si样品在高纯氮气的保护下从600至800℃退火1小时。通过四探针电阻测试仪(FPP)、SEM、XRD研究了Cu/Ta-Si-N/Ti/Si系统在退火过程中的热稳定性。研究结果表明:沉积到Ti膜上的Ta-Si-N膜为非晶态结构;Cu/Ta-Si-N/Ti/Si样品700℃以上退火后Ti原子扩散到Si中形成的TiSi2能有效地降低Ta-Si-N与Si之间的接触电阻;Ta-Si-N/Ti阻挡层750℃退火后仍能有效地阻止Cu的扩散。%Ta-Si-N (10nm)/Ti(20nm) bilayer diffusion barrier was grown between n-type (100) silicon wafer and Cu film by RF reactive magnetron sputtering. The Cu/Ta-Si-N/Ti/Si samples were subsequently annealed at different temperatures ranging from 600 to 800℃in N2 gas for 1 h. In order to investigate the thermal stability of the barrier structure after annealing, X-ray diffraction, scanning electron microscopy and 4-point probe technique were performed, respectively. The results reveal that Ta-Si-N film deposited on Ti film is amorphous. In addition, the diffusion of Ti atoms into Si substrate results in TiSi2 which decreases the contact resistance between barrier Si and Ta-Si-N(10nm)/Ti(20nm) bilayer can serve as effective diffusion barriers up to 750℃.

  17. Method of making dense, conformal, ultra-thin cap layers for nanoporous low-k ILD by plasma assisted atomic layer deposition

    Science.gov (United States)

    Jiang, Ying-Bing; Cecchi, Joseph L.; Brinker, C. Jeffrey

    2011-05-24

    Barrier layers and methods for forming barrier layers on a porous layer are provided. The methods can include chemically adsorbing a plurality of first molecules on a surface of the porous layer in a chamber and forming a first layer of the first molecules on the surface of the porous layer. A plasma can then be used to react a plurality of second molecules with the first layer of first molecules to form a first layer of a barrier layer. The barrier layers can seal the pores of the porous material, function as a diffusion barrier, be conformal, and/or have a negligible impact on the overall ILD k value of the porous material.

  18. Hot Corrosion Mechanism in Multi-Layer Suspension Plasma Sprayed Gd2Zr2O7 /YSZ Thermal Barrier Coatings in the Presence of V2O5 + Na2SO4

    Science.gov (United States)

    Jonnalagadda, Krishna Praveen; Mahade, Satyapal; Curry, Nicholas; Li, Xin-Hai; Markocsan, Nicolaie; Nylén, Per; Björklund, Stefan; Peng, Ru Lin

    2017-01-01

    This study investigates the corrosion resistance of two-layer Gd2Zr2O7/YSZ, three-layer dense Gd2Zr2O7/ Gd2Zr2O7/YSZ, and a reference single-layer YSZ coating with a similar overall top coat thickness of 300-320 µm. All the coatings were manufactured by suspension plasma spraying resulting in a columnar structure except for the dense layer. Corrosion tests were conducted at 900 °C for 8 h using V2O5 and Na2SO4 as corrosive salts at a concentration of approximately 4 mg/cm2. SEM investigations after the corrosion tests show that Gd2Zr2O7-based coatings exhibited lower reactivity with the corrosive salts and the formation of gadolinium vanadate (GdVO4), accompanied by the phase transformation of zirconia was observed. It is believed that the GdVO4 formation between the columns reduced the strain tolerance of the coating and also due to the fact that Gd2Zr2O7 has a lower fracture toughness value made it more susceptible to corrosion-induced damage. Furthermore, the presence of a relatively dense layer of Gd2Zr2O7 on the top did not improve in reducing the corrosion-induced damage. For the reference YSZ coating, the observed corrosion-induced damage was lower probably due to combination of more limited salt penetration, the SPS microstructure and superior fracture toughness of YSZ.

  19. Hot Corrosion Mechanism in Multi-Layer Suspension Plasma Sprayed Gd2Zr2O7 /YSZ Thermal Barrier Coatings in the Presence of V2O5 + Na2SO4

    Science.gov (United States)

    Jonnalagadda, Krishna Praveen; Mahade, Satyapal; Curry, Nicholas; Li, Xin-Hai; Markocsan, Nicolaie; Nylén, Per; Björklund, Stefan; Peng, Ru Lin

    2016-12-01

    This study investigates the corrosion resistance of two-layer Gd2Zr2O7/YSZ, three-layer dense Gd2Zr2O7/ Gd2Zr2O7/YSZ, and a reference single-layer YSZ coating with a similar overall top coat thickness of 300-320 µm. All the coatings were manufactured by suspension plasma spraying resulting in a columnar structure except for the dense layer. Corrosion tests were conducted at 900 °C for 8 h using V2O5 and Na2SO4 as corrosive salts at a concentration of approximately 4 mg/cm2. SEM investigations after the corrosion tests show that Gd2Zr2O7-based coatings exhibited lower reactivity with the corrosive salts and the formation of gadolinium vanadate (GdVO4), accompanied by the phase transformation of zirconia was observed. It is believed that the GdVO4 formation between the columns reduced the strain tolerance of the coating and also due to the fact that Gd2Zr2O7 has a lower fracture toughness value made it more susceptible to corrosion-induced damage. Furthermore, the presence of a relatively dense layer of Gd2Zr2O7 on the top did not improve in reducing the corrosion-induced damage. For the reference YSZ coating, the observed corrosion-induced damage was lower probably due to combination of more limited salt penetration, the SPS microstructure and superior fracture toughness of YSZ.

  20. A double barrier memristive device

    Science.gov (United States)

    Hansen, M.; Ziegler, M.; Kolberg, L.; Soni, R.; Dirkmann, S.; Mussenbrock, T.; Kohlstedt, H.

    2015-09-01

    We present a quantum mechanical memristive Nb/Al/Al2O3/NbxOy/Au device which consists of an ultra-thin memristive layer (NbxOy) sandwiched between an Al2O3 tunnel barrier and a Schottky-like contact. A highly uniform current distribution for the LRS (low resistance state) and HRS (high resistance state) for areas ranging between 70 μm2 and 2300 μm2 were obtained, which indicates a non-filamentary based resistive switching mechanism. In a detailed experimental and theoretical analysis we show evidence that resistive switching originates from oxygen diffusion and modifications of the local electronic interface states within the NbxOy layer, which influences the interface properties of the Au (Schottky) contact and of the Al2O3 tunneling barrier, respectively. The presented device might offer several benefits like an intrinsic current compliance, improved retention and no need for an electric forming procedure, which is especially attractive for possible applications in highly dense random access memories or neuromorphic mixed signal circuits.

  1. Barriers to screening mammography.

    Science.gov (United States)

    Sarma, Elizabeth A

    2015-01-01

    Breast cancer (BRCA) is the second most commonly diagnosed cancer among women in the USA, and mammography is an effective means for the early detection of BRCA. Identifying the barriers to screening mammography can inform research, policy and practice aiming to increase mammography adherence. A literature review was conducted to determine common barriers to screening mammography adherence. PsycINFO and PubMed databases were searched to identify studies published between 2000 and 2012 that examined barriers associated with reduced mammography adherence. Three thematic groups of barriers, based on social ecology, were identified from the literature: healthcare system-level, social and individual-level barriers. Researchers must consider screening behaviour in context and, therefore, should simultaneously consider each level of barriers when attempting to understand screening behaviour and create interventions to increase mammography adherence.

  2. Permanent isolation surface barrier development plan

    Energy Technology Data Exchange (ETDEWEB)

    Wing, N.R.

    1994-01-01

    The exhumation and treatment of wastes may not always be the preferred alternative in the remediation of a waste site. In-place disposal alternatives, under certain circumstances, may be the most desirable alternatives to use in the protection of human health and the environment. The implementation of an in-place disposal alternative will likely require some type of protective covering that will provide long-term isolation of the wastes from the accessible environment. Even if the wastes are exhumed and treated, a long-term barrier may still be needed to adequately dispose of the treated wastes or any remaining waste residuals. Currently, no {open_quotes}proven{close_quotes} long-term barrier is available. The Hanford Site Permanent Isolation Surface Barrier Development Program (BDP) was organized to develop the technology needed to provide a long-term surface barrier capability for the Hanford Site. The permanent isolation barrier technology also could be used at other sites. Permanent isolation barriers use engineered layers of natural materials to create an integrated structure with redundant protective features. Drawings of conceptual permanent isolation surface barriers are shown. The natural construction materials (e.g., fine soil, sand, gravel, riprap, asphalt) have been selected to optimize barrier performance and longevity. The objective of current designs is to use natural materials to develop a maintenance-free permanent isolation surface barrier that isolates wastes for a minimum of 1,000 years by limiting water drainage to near-zero amounts; reducing the likelihood of plant, animal, and human intrusion; controlling the exhalation of noxious gases; and minimizing erosion-related problems.

  3. 基于不同基体条件的Sm2Zr2O7/YSZ双层热障涂层界面残余热应力的数值仿真%Numerical Simulation of Residual Thermal Stresses at the Interface of Sm2Zr2O7/YSZ Double-layer Thermal Barrier Coatings Based on Different Matrix Conditions

    Institute of Scientific and Technical Information of China (English)

    李振军; 吴惠云

    2012-01-01

    采用有限元分析软件ANSYS对2Cr13基体等离子喷涂SmZr2O7/YSZ双层热障涂层界面残余热应力分布进行了仿真.结果表明:在涂层Sm2Zr2O7/YSZ及YSZ/NiCoCrAlY界面存在较大的残余热应力,且应力梯度基本不变,表明应力梯度与基体厚度、半径无关.%The distribution of residual thermal stresses at the interface of plasma sprayed Sm2Zr2O7/YSZ double-layer thermal barrier coatings on 2Cr13 substrates were simulated by using ANSYS software. Results show that higher residual thermal stresses exist in the Sm2Zr2O7/YSZ layer interface and the YSZ/ NiCoCrAlY layer interface, and the stress gradient is basically unchanged. It is also indicated that the stress gradient is independent of Matrix thickness and radius.

  4. Planar varactor frequency multiplier devices with blocking barrier

    Science.gov (United States)

    Lieneweg, Udo (Inventor); Frerking, Margaret A. (Inventor); Maserjian, Joseph (Inventor)

    1994-01-01

    The invention relates to planar varactor frequency multiplier devices with a heterojunction blocking barrier for near millimeter wave radiation of moderate power from a fundamental input wave. The space charge limitation of the submillimeter frequency multiplier devices of the BIN(sup +) type is overcome by a diode structure comprising an n(sup +) doped layer of semiconductor material functioning as a low resistance back contact, a layer of semiconductor material with n-type doping functioning as a drift region grown on the back contact layer, a delta doping sheet forming a positive charge at the interface of the drift region layer with a barrier layer, and a surface metal contact. The layers thus formed on an n(sup +) doped layer may be divided into two isolated back-to-back BNN(sup +) diodes by separately depositing two surface metal contacts. By repeating the sequence of the drift region layer and the barrier layer with the delta doping sheet at the interfaces between the drift and barrier layers, a plurality of stacked diodes is formed. The novelty of the invention resides in providing n-type semiconductor material for the drift region in a GaAs/AlGaAs structure, and in stacking a plurality of such BNN(sup +) diodes stacked for greater output power with and connected back-to-back with the n(sup +) GaAs layer as an internal back contact and separate metal contact over an AlGaAs barrier layer on top of each stack.

  5. Mechanism of Striation in Dielectric Barrier Discharge

    Institute of Scientific and Technical Information of China (English)

    FENG Shuo; HE Feng; OUYANG Ji-Ting

    2007-01-01

    @@ The mechanism of striations in dielectric barrier discharge in pure neon is studied by a two-dimensional particlein-cell/Monte Carlo collision (PIC-MCC) model. It is shown that the striations appear in the plasma background,and non-uniform electrical field resulting from ionization and the negative wall charge appear on the dielectric layer above the anode. The sustainment of striations is a non-local kinetic effect of electrons in a stratified field controlled by non-elastic impact with neutral gases. The striations in the transient dielectric barrier discharge are similar to those in dc positive column discharge.

  6. Converse Barrier Certificate Theorems

    DEFF Research Database (Denmark)

    Wisniewski, Rafael; Sloth, Christoffer

    2016-01-01

    This paper shows that a barrier certificate exists for any safe dynamical system. Specifically, we prove converse barrier certificate theorems for a class of structurally stable dynamical systems. Other authors have developed a related result by assuming that the dynamical system has neither sing...

  7. EFFECT OF SINGLE-LAYER THICKNESS UPON RESIDUAL THERMAL STRESS IN Sm2Zr2O7/8YSZ THERMAL BARRIER COATINGS%单层厚度对Sm2Zr2O7/8YSZ热障涂层残余热应力的影响

    Institute of Scientific and Technical Information of China (English)

    魏媛; 李世显

    2012-01-01

    采用有限单元法研究了金属粘结层厚度、热生长氧化层厚度及陶瓷层厚度对Sm2Zr2O7/8YSZ双陶瓷层热障涂层残余热应力的影响。结果表明,金属粘结层厚度为0.1mm时,涂层径向应力最小。涂层径向应力随热生长氧化层的厚度的增加而减小。当YSZ厚度在0.1~0.5mm之间时,径向热应力随YSZ厚度增加而增大,超过0.5mm后应力基本不再变化。陶瓷层最佳厚度组合是0.1mmYSZ+0.9mmSm2Zr2O7。%In the current paper, the influence of thickness of bonding-layer, thermally oxide-layer and ceramic-layer on residual thermal stress in Sm2Zr2O7/8YSZ thermal barrier coatings were investigated by finite element method. Results show that 0.1mm-thickness bonding-layer lead to he lowest radial stress. Radial stress in coating decrease gradually with increase of TGO-thickness. In YSZ-thickness range 0.1-0.5mm, radial stress increases gradually, and it remains stable above 0.5ram. The most appropriate thickness combination is 0.1 mmYSZ+0.9mmSm2Zr2O7.

  8. Skin barrier function

    DEFF Research Database (Denmark)

    2016-01-01

    Renowned experts present the latest knowledge Although a very fragile structure, the skin barrier is probably one of the most important organs of the body. Inward/out it is responsible for body integrity and outward/in for keeping microbes, chemicals, and allergens from penetrating the skin. Since...... the role of barrier integrity in atopic dermatitis and the relationship to filaggrin mutations was discovered a decade ago, research focus has been on the skin barrier, and numerous new publications have become available. This book is an interdisciplinary update offering a wide range of information...... on the subject. It covers new basic research on skin markers, including results on filaggrin and on methods for the assessment of the barrier function. Biological variation and aspects of skin barrier function restoration are discussed as well. Further sections are dedicated to clinical implications of skin...

  9. Current-voltage relation for thin tunnel barriers: Parabolic barrier model

    DEFF Research Database (Denmark)

    Hansen, Kim; Brandbyge, Mads

    2004-01-01

    We derive a simple analytic result for the current-voltage curve for tunneling of electrons through a thin uniform insulating layer modeled by a parabolic barrier. Our model, which goes beyond the Wentzel–Kramers–Brillouin approximation, is applicable also in the limit of highly transparant barri...

  10. Controlled Thermal Expansion Coat for Thermal Barrier Coatings

    Science.gov (United States)

    Brindley, William J. (Inventor); Miller, Robert A. (Inventor); Aikin, Beverly J. M. (Inventor)

    1999-01-01

    A improved thermal barrier coating and method for producing and applying such is disclosed herein. The thermal barrier coating includes a high temperature substrate, a first bond coat layer applied to the substrate of MCrAlX, and a second bond coat layer of MCrAlX with particles of a particulate dispersed throughout the MCrAlX and the preferred particulate is Al2O3. The particles of the particulate dispersed throughout the second bond coat layer preferably have a diameter of less then the height of the peaks of the second bond coat layer, or a diameter of less than 5 microns. The method of producing the second bond coat layer may either include the steps of mechanical alloying of particles throughout the second bond coat layer, attrition milling the particles of the particulate throughout the second bond coat layer, or using electrophoresis to disperse the particles throughout the second bond coat layer. In the preferred embodiment of the invention, the first bond coat layer is applied to the substrate, and then the second bond coat layer is thermally sprayed onto the first bond coat layer. Further, in a preferred embodiment of die invention, a ceramic insulating layer covers the second bond coat layer.

  11. Diffusion Barrier Coating System and Oxidation Behavior of Coated Alloys

    Institute of Scientific and Technical Information of China (English)

    T.NARITA

    2009-01-01

    @@ 1 Introduction Research into the formation of Re-based alloys is in progress in our laboratory to provide a diffusion barrier layer between heat-resistant alloys and Al reservoir layers, which assist in the formation and maintenance a protective Al2O3 scale for long periods. Coatings with a two-layered structure comprised of inner Re-based alloy layer and outer β-NiAl layer with or without Pt addition were successfully formed on various heat resistant alloys such as Ni-based singlecrystal superalloys, Ni-based heat resistant alloys, NiMo based alloy, Ni-Cr based alloy, and Fe-based alloys. The duplex layer coating proposed is generally termed a diffusion barrier coating system; DBC system.

  12. Recycler barrier RF buckets

    Energy Technology Data Exchange (ETDEWEB)

    Bhat, C.M.; /Fermilab

    2011-03-01

    The Recycler Ring at Fermilab uses a barrier rf systems for all of its rf manipulations. In this paper, I will give an overview of historical perspective on barrier rf system, the longitudinal beam dynamics issues, aspects of rf linearization to produce long flat bunches and methods used for emittance measurements of the beam in the RR barrier rf buckets. Current rf manipulation schemes used for antiproton beam stacking and longitudinal momentum mining of the RR beam for the Tevatron collider operation are explained along with their importance in spectacular success of the Tevatron luminosity performance.

  13. Gut barrier in health and disease: focus on childhood.

    Science.gov (United States)

    Viggiano, D; Ianiro, G; Vanella, G; Bibbò, S; Bruno, G; Simeone, G; Mele, G

    2015-01-01

    The gut barrier is a functional unit, organized as a multi-layer system, made up of two main components: a physical barrier surface, which prevents bacterial adhesion and regulates paracellular diffusion to the host tissues, and a deep functional barrier, that is able to discriminate between pathogens and commensal microorganisms, organizing the immune tolerance and the immune response to pathogens. Other mechanisms, such as gastric juice and pancreatic enzymes (which both have antibacterial properties) participate in the luminal integrity of the gut barrier. From the outer layer to the inner layer, the physical barrier is composed of gut microbiota (that competes with pathogens to gain space and energy resources, processes the molecules necessary to mucosal integrity and modulates the immunological activity of deep barrier), mucus (which separates the intraluminal content from more internal layers and contains antimicrobial products and secretory IgA), epithelial cells (which form a physical and immunological barrier) and the innate and adaptive immune cells forming the gut-associated lymphoid tissue (which is responsible for antigen sampling and immune responses). Disruption of the gut barrier has been associated with many gastrointestinal diseases, but also with extra-intestinal pathological condition, such as type 1 diabetes mellitus, allergic diseases or autism spectrum disorders. The maintenance of a healthy intestinal barrier is therefore of paramount importance in children, for both health and economic reasons. Many drugs or compounds used in the treatment of gastrointestinal disorders act through the restoration of a normal intestinal permeability. Several studies have highlighted the role of probiotics in the modulation and reduction of intestinal permeability, considering the strong influence of gut microbiota in the modulation of the function and structure of gut barrier, but also on the immune response of the host. To date, available weapons for the

  14. The role of plants on isolation barrier systems

    Energy Technology Data Exchange (ETDEWEB)

    Link, S.O.; Downs, J.L. [Pacific Northwest Lab., Richland, WA (United States); Waugh, W.J. [UNC Chem-Nuclear Geotech, Grand Junction, CO (United States)

    1994-11-01

    Surface barriers are used to isolate buried wastes from the environment. Most have been built for short-term isolation. The need to isolate radioactive wastes from the environment requires that the functional integrity of a barrier be maintained for thousands of years. Barrier function strongly depends on vegetation. Plants reduce wind and water erosion and minimize drainage, but may transport contaminants if roots extend into buried wastes. Our review of the function of plants on surface barriers focuses on the role of plants across mesic to arid environments and gives special consideration to studies done at Hanford. The Hanford Barrier Development Program was created to design and test an earthen cover system to inhibit water infiltration, plant and animal intrusion, and wind and water erosion, while isolating buried wastes for at least 1000 years. Studies at the Hanford have shown that plants will significantly interact with the barrier. Plants transpire soil water back into the atmosphere. Deep-rooted perennials best recycle water; soil water may drain through the root zone of shallow-rooted annuals. Lysimeter studies indicate that a surface layer of fine soil with deep-rooted plants precludes drainage even with three times normal precipitation. The presence of vegetation greatly reduces water and wind erosion, but deep-rooted plants pose a threat of biointrusion and contaminant transport. The Hanford barrier includes a buried rock layer and asphalt layer to prevent biointrusion.

  15. Barriers to Effective Listening.

    Science.gov (United States)

    Hulbert, Jack E.

    1989-01-01

    Discusses the following barriers which interfere with listening efficiency: content, speaker, medium, distractions, mindset, language, listening speed, and feedback. Suggests ways to combat these obstacles to accurate comprehension. (MM)

  16. [Vascular endothelial Barrier Function].

    Science.gov (United States)

    Ivanov, A N; Puchinyan, D M; Norkin, I A

    2015-01-01

    Endothelium is an important regulator of selective permeability of the vascular wall for different molecules and cells. This review summarizes current data on endothelial barrier function. Endothelial glycocalyx structure, its function and role in the molecular transport and leukocytes migration across the endothelial barrier are discussed. The mechanisms of transcellular transport of macromolecules and cell migration through endothelial cells are reviewed. Special section of this article addresses the structure and function of tight and adherens endothelial junction, as well as their importance for the regulation of paracellular transport across the endothelial barrier. Particular attention is paid to the signaling mechanism of endothelial barrier function regulation and the factors that influence on the vascular permeability.

  17. Plastic Schottky-barrier solar cells

    Science.gov (United States)

    Waldrop, J.R.; Cohen, M.J.

    1981-12-30

    A photovoltaic cell structure is fabricated from an active medium including an undoped polyacetylene, organic semiconductor. When a film of such material is in rectifying contact with a metallic area electrode, a Schottky-barrier junction is obtained within the body of the cell structure. Also, a gold overlayer passivates a magnesium layer on the undoped polyacetylene film. With the proper selection and location of elements a photovoltaic cell structure and solar cell are obtained.

  18. On the Traversal Time of Barriers

    Science.gov (United States)

    Aichmann, Horst; Nimtz, Günter

    2014-06-01

    Fifty years ago Hartman studied the barrier transmission time of wave packets (J Appl Phys 33:3427-3433, 1962). He was inspired by the tunneling experiments across thin insulating layers at that time. For opaque barriers he calculated faster than light propagation and a transmission time independent of barrier length, which is called the Hartman effect. A faster than light (FTL or superluminal) wave packet velocity was deduced in analog tunneling experiments with microwaves and with infrared light thirty years later. Recently, the conjectured zero time of electron tunneling was claimed to have been observed in ionizing helium inside the barrier. The calculated and measured short tunneling time arises at the barrier front. This tunneling time was found to be universal for elastic fields as well as for electromagnetic fields. Remarkable is that the delay time is the same for the reflected and the transmitted waves in the case of symmetric barriers. Several theoretical physicists predicted this strange nature of the tunneling process. However, even with this background many members of the physics community do not accept a FTL signal velocity interpretation of the experimental tunneling results. Instead a luminal front velocity was calculated to explain the FTL experimental results frequently. However, Brillouin stated in his book on wave propagation and group velocity that the front velocity is given by the group velocity of wave packets in the case of physical signals, which have only finite frequency bandwidths. Some studies assumed barriers to be cavities and the observed tunneling time does represent the cavity lifetime. We are going to discus these continuing misleading interpretations, which are found in journals and in textbooks till today.

  19. Numerical investigation of dielectric barrier discharges

    Science.gov (United States)

    Li, Jing

    1997-12-01

    A dielectric barrier discharge (DBD) is a transient discharge occurring between two electrodes in coaxial or planar arrangements separated by one or two layers of dielectric material. The charge accumulated on the dielectric barrier generates a field in a direction opposite to the applied field. The discharge is quenched before an arc is formed. It is one of the few non-thermal discharges that operates at atmospheric pressure and has the potential for use in pollution control. In this work, a numerical model of the dielectric barrier discharge is developed, along with the numerical approach. Adaptive grids based on the charge distribution is used. A self-consistent method is used to solve for the electric field and charge densities. The Successive Overrelaxation (SOR) method in a non-uniform grid spacing is used to solve the Poisson's equation in the cylindrically-symmetric coordinate. The Flux Corrected Transport (FCT) method is modified to solve the continuity equations in the non-uniform grid spacing. Parametric studies of dielectric barrier discharges are conducted. General characteristics of dielectric barrier discharges in both anode-directed and cathode-directed streamer are studied. Effects of the dielectric capacitance, the applied field, the resistance in external circuit and the type of gases (O2, air, N2) are investigated. We conclude that the SOR method in an adaptive grid spacing for the solution of the Poisson's equation in the cylindrically-symmetric coordinate is convergent and effective. The dielectric capacitance has little effect on the g-factor of radical production, but it determines the strength of the dielectric barrier discharge. The applied field and the type of gases used have a significant role on the current peak, current pulse duration and radical generation efficiency, discharge strength, and microstreamer radius, whereas the external series resistance has very little effect on the streamer properties. The results are helpful in

  20. Hedging Double Barriers with Singles

    NARCIS (Netherlands)

    Sbuelz, A.

    2000-01-01

    Double barrier options provide risk managers with good-deal flexibility in tailoring portfolio returns.Their hedges offer full protection only if unwound along the barriers.This work provides non-dynamic hedges that project the risk of double barriers on to single barriers.Non-dynamic hedges overcom

  1. InGaP Heterojunction Barrier Solar Cells

    Science.gov (United States)

    Welser, Roger E. (Inventor)

    2014-01-01

    A new solar cell structure called a heterojunction barrier solar cell is described. As with previously reported quantum-well and quantum-dot solar cell structures, a layer of narrow band-gap material, such as GaAs or indium-rich InGaP, is inserted into the depletion region of a wide band-gap PN junction. Rather than being thin, however, the layer of narrow band-gap material is about 400-430 nm wide and forms a single, ultrawide well in the depletion region. Thin (e.g., 20-50 nm), wide band-gap InGaP barrier layers in the depletion region reduce the diode dark current. Engineering the electric field and barrier profile of the absorber layer, barrier layer, and p-type layer of the PN junction maximizes photogenerated carrier escape. This new twist on nanostructured solar cell design allows the separate optimization of current and voltage to maximize conversion efficiency.

  2. Horizontal Acoustic Barriers for Protection from Seismic Waves

    Directory of Open Access Journals (Sweden)

    Sergey V. Kuznetsov

    2011-01-01

    Full Text Available The basic idea of a seismic barrier is to protect an area occupied by a building or a group of buildings from seismic waves. Depending on nature of seismic waves that are most probable in a specific region, different kinds of seismic barriers can be suggested. Herein, we consider a kind of a seismic barrier that represents a relatively thin surface layer that prevents surface seismic waves from propagating. The ideas for these barriers are based on one Chadwick's result concerning nonpropagation condition for Rayleigh waves in a clamped half-space, and Love's theorem that describes condition of nonexistence for Love waves. The numerical simulations reveal that to be effective the length of the horizontal barriers should be comparable to the typical wavelength.

  3. Barriers to cancer screening.

    Science.gov (United States)

    Womeodu, R J; Bailey, J E

    1996-01-01

    Many barriers to cancer screening have been summarized and discussed. Barriers have been documented in all patient populations, but some groups such as ethnic minorities and the elderly face unique barriers. The barriers to cancer screening, are multifactorial, but much of the responsibility for change must lie with health care providers and the health care delivery industry. This is not to free the patient of all responsibility, but some significant barriers are beyond their direct control. Take, for example, socioeconomic status, disease knowledge, and culturally related perceptions and myths about cancer detection and treatment. The health care industry must do a better job identifying and overcoming these barriers. The significant effects of provider counseling and advice must not be underestimated. Patients must first be advised, and then further actions must be taken if they reject the screening advice. Did they refuse adherence to recommendations because they do not view themselves as susceptible, because of overwhelming personal barriers, or because of a fatalistic attitude toward cancer detection and treatment? If that is the case, physicians and health care institutions must attempt to change perceptions, educate, and personalize the message so that patients accept their disease susceptibility [table: see text]. Multiple patient and provider risk factors have been identified that can be used to target patients particularly at high risk for inadequate cancer screening and providers at high risk for performing inadequate screening. Research has clearly demonstrated the effectiveness of interventions to improve tracking of patient and physician compliance with screening recommendations. Further research is needed to show the impact of managed-care penetration and payer status on screening efforts, and incentive schemes need to be tested that reward institutions and third-party payers who develop uniform standards and procedures for cancer screening. The

  4. Environmental barrier coating

    Science.gov (United States)

    Pujari, Vimal K.; Vartabedian, Ara; Collins, William T.; Woolley, David; Bateman, Charles

    2012-12-18

    The present invention relates generally to a multi-layered article suitable for service in severe environments. The article may be formed of a substrate, such as silicon carbide and/or silicon nitride. The substrate may have a first layer of a mixture of a rare earth silicate and Cordierite. The substrate may also have a second layer of a rare earth silicate or a mixture of a rare earth silicate and cordierite.

  5. Overcoming Language Barriers

    Science.gov (United States)

    De Buda, Yvonne

    1976-01-01

    Many family physicians in Canada experience language and cultural barriers between themselves and their patients. Several aspects of the ensuing problems are described and some practical suggestions for solutions are made. The importance of health education for new Canadians in the family physician's office as well as through the media and community projects is stressed. Imagesp68-ap68-bp70-a PMID:21308059

  6. On the performance of capillary barriers as landfill cover

    Science.gov (United States)

    Kämpf, M.; Montenegro, H.

    Landfills and waste heaps require an engineered surface cover upon closure. The capping system can vary from a simple soil cover to multiple layers of earth and geosynthetic materials. Conventional design features a compacted soil layer, which suffers from drying out and cracking, as well as root and animal intrusion. Capillary barriers consisting of inclined fine-over-coarse soil layers are investigated as an alternative cover system. Under unsaturated conditions, the textural contrast delays vertical drainage by capillary forces. The moisture that builds up above the contact will flow downdip along the interface of the layers. Theoretical studies of capillary barriers have identified the hydraulic properties of the layers, the inclination angle, the length of the field and the infiltration rate as the fundamental characteristics of the system. However, it is unclear how these findings can lead to design criteria for capillary barriers. To assess the uncertainty involved in such approaches, experiments have been carried out in a 8 m long flume and on large scale test sites (40 m x 15 m). In addition, the ability of a numerical model to represent the relevant flow processes in capillary barriers has been examined.

  7. On the performance of capillary barriers as landfill cover

    Directory of Open Access Journals (Sweden)

    M. Kämpf

    1997-01-01

    Full Text Available Landfills and waste heaps require an engineered surface cover upon closure. The capping system can vary from a simple soil cover to multiple layers of earth and geosynthetic materials. Conventional design features a compacted soil layer, which suffers from drying out and cracking, as well as root and animal intrusion. Capillary barriers consisting of inclined fine-over-coarse soil layers are investigated as an alternative cover system. Under unsaturated conditions, the textural contrast delays vertical drainage by capillary forces. The moisture that builds up above the contact will flow downdip along the interface of the layers. Theoretical studies of capillary barriers have identified the hydraulic properties of the layers, the inclination angle, the length of the field and the infiltration rate as the fundamental characteristics of the system. However, it is unclear how these findings can lead to design criteria for capillary barriers. To assess the uncertainty involved in such approaches, experiments have been carried out in a 8 m long flume and on large scale test sites (40 m x 15 m. In addition, the ability of a numerical model to represent the relevant flow processes in capillary barriers has been examined.

  8. Surface pre-treatment for barrier coatings on polyethylene terephthalate

    Science.gov (United States)

    Bahre, H.; Bahroun, K.; Behm, H.; Steves, S.; Awakowicz, P.; Böke, M.; Hopmann, Ch; Winter, J.

    2013-02-01

    Polymers have favourable properties such as light weight, flexibility and transparency. Consequently, this makes them suitable for food packaging, organic light-emitting diodes and flexible solar cells. Nonetheless, raw plastics do not possess sufficient barrier functionality against oxygen and water vapour, which is of paramount importance for most applications. A widespread solution is to deposit thin silicon oxide layers using plasma processes. However, silicon oxide layers do not always fulfil the requirements concerning adhesion and barrier performance when deposited on films. Thus, plasma pre-treatment is often necessary. To analyse the influence of a plasma-based pre-treatment on barrier performance, different plasma pre-treatments on three reactor setups were applied to a very smooth polyethylene terephthalate film before depositing a silicon oxide barrier layer. In this paper, the influence of oxygen and argon plasma pre-treatments towards the barrier performance is discussed examining the chemical and topological change of the film. It was observed that a short one-to-ten-second plasma treatment can reduce the oxygen transmission rate by a factor of five. The surface chemistry and the surface topography change significantly for these short treatment times, leading to an increased surface energy. The surface roughness rises slowly due to the development of small spots in the nanometre range. For very long treatment times, surface roughness of the order of the barrier layer's thickness results in a complete loss of barrier properties. During plasma pre-treatment, the trade-off between surface activation and roughening of the surface has to be carefully considered.

  9. Barrier mechanisms in the Drosophila blood-brain barrier

    OpenAIRE

    Samantha Jane Hindle; Roland Jerome Bainton

    2014-01-01

    The invertebrate blood-brain barrier field is growing at a rapid pace and, in recent years, studies have shown a physiologic and molecular complexity that has begun to rival its vertebrate counterpart. Novel mechanisms of paracellular barrier maintenance through GPCR signaling were the first demonstrations of the complex adaptive mechanisms of barrier physiology. Building upon this work, the integrity of the invertebrate blood-brain barrier has recently been shown to require coordinated funct...

  10. Geophysical characterization of subsurface barriers

    Energy Technology Data Exchange (ETDEWEB)

    Borns, D.J.

    1995-08-01

    An option for controlling contaminant migration from plumes and buried waste sites is to construct a subsurface barrier of a low-permeability material. The successful application of subsurface barriers requires processes to verify the emplacement and effectiveness of barrier and to monitor the performance of a barrier after emplacement. Non destructive and remote sensing techniques, such as geophysical methods, are possible technologies to address these needs. The changes in mechanical, hydrologic and chemical properties associated with the emplacement of an engineered barrier will affect geophysical properties such a seismic velocity, electrical conductivity, and dielectric constant. Also, the barrier, once emplaced and interacting with the in situ geologic system, may affect the paths along which electrical current flows in the subsurface. These changes in properties and processes facilitate the detection and monitoring of the barrier. The approaches to characterizing and monitoring engineered barriers can be divided between (1) methods that directly image the barrier using the contrasts in physical properties between the barrier and the host soil or rock and (2) methods that reflect flow processes around or through the barrier. For example, seismic methods that delineate the changes in density and stiffness associated with the barrier represents a direct imaging method. Electrical self potential methods and flow probes based on heat flow methods represent techniques that can delineate the flow path or flow processes around and through a barrier.

  11. Apparatus and method of manufacture for depositing a composite anti-reflection layer on a silicon surface

    Science.gov (United States)

    Pain, Bedabrata (Inventor)

    2012-01-01

    An apparatus and associated method are provided. A first silicon layer having at least one of an associated passivation layer and barrier is included. Also included is a composite anti-reflection layer including a stack of layers each with a different thickness and refractive index. Such composite anti-reflection layer is disposed adjacent to the first silicon layer.

  12. Improvement of thermally grown oxide layer in thermal barrier coating systems with nano alumina as third layer%纳米氧化铝作为第三层对热障涂层中热生长氧化物层的改善

    Institute of Scientific and Technical Information of China (English)

    Mohammadreza DAROONPARVAR; Muhamad Azizi Mat YAJID; Noordin Mohd YUSOF; Saeed FARAHANY; Mohammad Sakhawat HUSSAIN; Hamid Reza BAKHSHESHI-RAD; Z.VALEFI; Ahmad ABDOLAHI

    2013-01-01

    在热障涂层的顶层与连接层界面之间会生成热生长氧化物层.当涂层热暴露在空气中时,这种热生长氧化物的生长会导致陶瓷层与连接层的剥落.研究了4种大气等离子喷涂热障涂层在空气中的耐高温氧化性能.将这4种涂层放在1000℃的电炉中在空气下分别保温24、48和120 h.组织观察表明,在纳米NiCrAlY/YSZ/纳米Al2O3涂层中,热生长氧化物层的生长速率远比其它3种涂层中的低.EDS和XRD分析表明,在热生长氧化物(Al2O3)涂层上,生成了Ni(Cr,Al)2O4混合氧化物(尖晶石型)和NiO,在纳米NiCrAlY/YSZ/纳米Al2O3涂层中,这种生长在Al2O3层上的有害混合氧化物层的厚度比在其它涂层中的低很多.%A thermally grown oxide (TGO) layer is formed at the interface of bond coat/top coat.The TGO growth during thermal exposure in air plays an important role in the spallation of the ceramic layer from the bond coat.High temperature oxidation resistance of four types of atmospheric plasma sprayed TBCs was investigated.These coatings were oxidized at 1000 ℃ for 24,48 and 120 h in a normal electric furnace under air atmosphere.Microstructural characterization showed that the growth of the TGO layer in nano NiCrAlY/YSZ/nano Al2O3 coating is much lower than in other coatings.Moreover,EDS and XRD analyses revealed the formation of Ni(Cr,Al)2O4 mixed oxides (as spinel) and NiO onto the Al2O3 (TGO) layer.The formation of detrimental mixed oxides (spinels) on the Al2O3 (TGO) layer of nano NiCrAlY/YSZ/nano Al2O3 coating is much lower compared to that of other coatings after 120 h of high temperature oxidation at 1000 ℃.

  13. Nonmixing layers

    Science.gov (United States)

    Gaillard, Pierre; Giovangigli, Vincent; Matuszewski, Lionel

    2016-12-01

    We investigate the impact of nonideal diffusion on the structure of supercritical cryogenic binary mixing layers. This situation is typical of liquid fuel injection in high-pressure rocket engines. Nonideal diffusion has a dramatic impact in the neighborhood of chemical thermodynamic stability limits where the components become quasi-immiscible and ultimately form a nonmixing layer. Numerical simulations are performed for mixing layers of H2 and N2 at a pressure of 100 atm and temperature around 120-150 K near chemical thermodynamic stability limits.

  14. Dielectric layer equivalent capacitance and loading p erformance of a coaxial dielectric barrier discharge reactor%同轴介质阻挡放电发生器介质层等效电容和负载特性研究

    Institute of Scientific and Technical Information of China (English)

    赵凯; 牟宗信; 张家良

    2014-01-01

    大气压介质阻挡放电(DBD)可以在常压下产生非平衡等离子体,已经成为热点研究领域。通过脉冲或交变电源激发放电,研究电源输出特性、电源与放电发生器负载间的匹配和外界条件对放电的影响对于理解放电现象和提高放电效率具有重要意义。本文采用Lissajous图形法,分别研究了驱动电压、气流速率等因素影响同轴DBD发生器介质层等效电容及负载幅频特性的规律。结果表明,气流速率和驱动电压等外界条件影响DBD发生器的负载特性:介质层等效电容随气流速率增大而减小,随驱动电压增大而增大;幅频特性曲线均表现出RLC回路谐振现象,谐振频率随气流速率增大而增大,随驱动电压增大而减小。通过对比发现,介质层等效电容随频率的变化曲线与幅频特性曲线具有一致的特征,介质层等效电容是影响电路谐振频率动态变化的主要因素。提出了一种有关介质层等效电容的形成机制。%Dielectric barrier discharge (DBD) can produce non-equilibrium plasma at atmospheric pressure, and it has become a hot point in recent years. For the DBD excited by pulsed or alternated currents, the effects of the loading performance of power supply, the matching between supply and discharge reactor and the discharge phenomena on its discharge are interesting issues. The studies of these issues are of great importance for understanding the DBD processes and improving the power supply efficiency. In this paper, the Lissajous figures of a DBD reactor with coaxial electrode configuration are measured. The loading performance of the DBD reactor and the dependences of excitation voltage and air flow rate on the dielectric layer equivalent capacitance are studied in atmospheric air. According to the experimental data and circuit modeling analysis, it is proved that the dielectric layer capacitance decreases with the increase of air flow rate

  15. Synthesis of Layered Double Hydroxide Single-Layer Nanosheets in Formamide.

    Science.gov (United States)

    Yu, Jingfang; Liu, Jingjing; Clearfield, Abraham; Sims, Johnathan E; Speiegle, Michael T; Suib, Steven L; Sun, Luyi

    2016-11-21

    Layered double hydroxide (LDH) single-layer nanosheets were synthesized through a single-step process in the presence of formamide. This one-step process is simple, fast, and efficient and thus is potentially viable for large-scale production. Two key factors for the growth of LDH single-layer nanosheets, formamide concentration and LDH layer charge, were investigated thoroughly. A higher formamide concentration and a higher LDH layer charge are favorable for the growth of LDH single-layer nanosheets. The LDH single-layer nanosheets obtained at the premium formamide concentration and LDH layer charge were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and atomic force micrscopy (AFM). Poly(vinyl alcohol) (PVA)/LDH nanocomposite coatings were also prepared. The coated polyethylene terephthalate (PET) and poly(lactic acid) (PLA) films exhibited significantly improved oxygen gas barrier properties thanks to the well-dispersed and -aligned LDH single-layer nanosheets in the coating.

  16. Thermal barrier coating materials

    Directory of Open Access Journals (Sweden)

    David R. Clarke

    2005-06-01

    Full Text Available Improved thermal barrier coatings (TBCs will enable future gas turbines to operate at higher gas temperatures. Considerable effort is being invested, therefore, in identifying new materials with even better performance than the current industry standard, yttria-stabilized zirconia (YSZ. We review recent progress and suggest that an integrated strategy of experiment, intuitive arguments based on crystallography, and simulation may lead most rapidly to the development of new TBC materials.

  17. Aqueous oxidation reaction enabled layer-by-layer corrosion of semiconductor nanoplates into single-crystalline 2D nanocrystals with single layer accuracy and ionic surface capping.

    Science.gov (United States)

    Ji, Muwei; Xu, Meng; Zhang, Jun; Liu, Jiajia; Zhang, Jiatao

    2016-02-25

    A controllable aqueous oxidation reaction enabled layer-by-layer corrosion has been proposed to prepare high-quality two-dimensional (2D) semiconductor nanocrystals with single layer accuracy and well-retained hexagonal shapes. The appropriate oxidizing agent, such as H2O2, Fe(NO3)3, and HNO3, could not only corrode the layered-crystalline-structured Bi2Te3 nanoplates layer-by-layer to be a single quintuple layer, but also replace the organic barriers to be ionic ligands on the surface synergistically. AFM analysis was used to confirm the layer-by-layer exfoliation from the side to the center. Together with precise XRD, LRTEM and HRTEM characterizations, the controllable oxidation reaction enabled aqueous layer-by-layer corrosion mechanism has been studied.

  18. Dielectric barrier discharge processing of aerospace materials

    Science.gov (United States)

    Scott, S. J.; Figgures, C. C.; Dixon, D. G.

    2004-08-01

    We report the use of atmospheric pressure, air based, dielectric barrier discharges (DBD) to treat materials commonly used in the aerospace industries. The material samples were processed using a test-bed of a conventional DBD configuration in which the sample formed one of the electrodes and was placed in close proximity to a ceramic electrode. The discharges generated a powerful, cold oxidizing environment which was able to remove organic contaminants, etch primer and paint layers, oxidize aluminium and roughen carbon fibre composites by the selective removal of resin.

  19. Double Layer Dynamics in a Collisionless Magnetoplasma

    DEFF Research Database (Denmark)

    Iizuka, S.; Michelsen, Poul; Juul Rasmussen, Jens

    An experimental investigation of the dynamics of double layers is presented. The experiments are performed in a Q-machine plasma and the double layers are generated by applying a positive step potential to a cold collector plate terminating the plasma column. The double layer is created...... and propagation of a double layer. The period of the oscillations is determined by the propagation length of the double layer. The current is limited during the propagation of the double layer by a growing negative potential barrier formed on the low potential tail. Similar phenomena appear when a potential...... difference is applied between two plasmas in a Q-machine with two sources. In this case a stationary double layer forms in the plasma column, but the low potential tail is subject to "back and forth" oscillations leading to large amplitude current oscillations....

  20. Educational Opportunity: El Salvador's Barriers to Achieving Equality Persist.

    Science.gov (United States)

    Rosekrans, Kristin

    This paper analyzes barriers to educational equality in El Salvador, using a multi-layered framework of educational opportunity. To improve educational opportunity and give the most marginalized sectors of society the possibility of changing their life circumstances requires policies that go beyond mere access to formal schooling. The model…

  1. Surface Leakage Mechanisms in III-V Infrared Barrier Detectors

    Science.gov (United States)

    Sidor, D. E.; Savich, G. R.; Wicks, G. W.

    2016-09-01

    Infrared detector epitaxial structures employing unipolar barriers exhibit greatly reduced dark currents compared to simple pn-based structures. When correctly positioned within the structure, unipolar barriers are highly effective at blocking bulk dark current mechanisms. Unipolar barriers are also effective at suppressing surface leakage current in infrared detector structures employing absorbing layers that possess the same conductivity type in their bulk and at their surface. When an absorbing layer possesses opposite conductivity types in its bulk and at its surface, unipolar barriers are not solutions to surface leakage. This work reviews empirically determined surface band alignments of III-V semiconductor compounds and modeled surface band alignments of both gallium-free and gallium-containing type-II strained layer superlattice material systems. Surface band alignments are used to predict surface conductivity types in several detector structures, and the relationship between surface and bulk conductivity types in the absorbing layers of these structures is used as the basis for explaining observed surface leakage characteristics.

  2. Epithelial IL-18 Equilibrium Controls Barrier Function in Colitis

    NARCIS (Netherlands)

    Nowarski, Roni; Jackson, Ruaidhrí; Gagliani, Nicola; de Zoete, Marcel R; Palm, Noah W; Bailis, Will; Low, Jun Siong; Harman, Christian C D; Graham, Morven; Elinav, Eran; Flavell, Richard A

    2015-01-01

    The intestinal mucosal barrier controlling the resident microbiome is dependent on a protective mucus layer generated by goblet cells, impairment of which is a hallmark of the inflammatory bowel disease, ulcerative colitis. Here, we show that IL-18 is critical in driving the pathologic breakdown of

  3. Effects of Fe on properties of Zr barriers

    Energy Technology Data Exchange (ETDEWEB)

    Lutz, D.R.; Wisner, S.B.; Farkas, D.M.; Adamson, R.B. [GE Nuclear Energy, San Jose (United States)

    1999-07-01

    Zircaloy-2 barrier fuel having an inner surface layer of 'pure' zirconium (barrier) has been successful in eliminating fuel failures by the pellet cladding interaction (PCI) mechanism during power maneuvers in boiling water reactors (BWRs). Barrier purity and the softness of Zr relative to Zircaloy were originally the barrier characteristics of most interest, as PCI resistance depended upon them. To insure effective performance, impurity levels of the Zr were controlled such that the two major impurities, iron and oxygen, were generally kept to less than 500 ppm each. Recently there has been more interest in improving the inner surface corrosion resistance of barrier cladding in case of water or steam ingress due to a primary leak in the cladding. Increasing the Fe concentration in Zr is known to improve corrosion resistance of the barrier but at the possible risk of increasing PCI susceptibility. Therefore a series of laboratory studies were conducted to determine the range of Fe concentration which would optimize barrier performance. Zr barrier Fe concentrations in the range 90 - 3000 ppm were investigated. Corrosion testing in steam revealed a general increase in corrosion resistance with increasing Fe content, with the rate of change being most rapid in the 90 - 1000 ppm range. PCI resistance as determined by the GE Expanding Mandrel Test was found to be excellent in the range 400 - 1000 ppm Fe, but at 3000 ppm Fe the barrier was less resistant to iodine stress corrosion cracking and to PCI-type tubing failure. Further understanding of the results was obtained through detailed characterization of the size, distribution and composition of Fe-Zr second phases in the barrier. (authors)

  4. Electron Holography of Barrier Structures in Co/ZrAlOx/Co Magnetic Tunnel Junctions

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhe; ZHU Tao; SHEN Feng; SHENG Wen-Ting; WANG Wei-Gang; XIAO John Q; ZHANG Ze

    2005-01-01

    @@ We investigate the potential profiles and elemental distribution of barriers in Co/ZrAlOx/Co magnetic tunnel junctions (MTJs) using electron holography (EH) and scanning transmission electron microscopy. The MTJ barriers are introduced by oxidizing a bilayer consisting with a uniform 0.45-nm Al layer and a wedge-shaped Zr layer (0-2 nm). From the scanning transmission electron microscopy, AlOx and ZrOx layers are mixed together,indicating that compact AlOx layer cannot be formed in such a bilayer structure of barriers. The EH results reveal that there are no sharp interfaces between the barrier and magnetic electrodes, which may be responsible for a smaller tunnelling magnetoresistance compared with the MTJs of Co/AlOx/Co.

  5. Improvement of power characteristics in 850 nm quantum well laser with asymmetric barriers

    DEFF Research Database (Denmark)

    Zubov, F.I.; Maximov, M.V.; Shernyakov, YuM.;

    2015-01-01

    Power and spectral characteristics of lasers with asymmetric barrier layers (ABLs) and a wide waveguide are studied. The use of ABLs reduces the saturation of light-current characteristic, associated with the parasitic recombination in the waveguide....

  6. Atopic eczema : the role of stratum corneum lipids in the skin barrier

    NARCIS (Netherlands)

    Janssens, Michelle

    2013-01-01

    The skin barrier function strongly relies on the outermost layer of the skin, the stratum corneum (SC), which consists of dead corneocytes embedded in a highly organized extracellular lipid matrix. The lipids are thought to play a crucial role in the skin barrier function. This lipid matrix consists

  7. Beyond parallax barriers: applying formal optimization methods to multilayer automultiscopic displays

    Science.gov (United States)

    Lanman, Douglas; Wetzstein, Gordon; Hirsch, Matthew; Heidrich, Wolfgang; Raskar, Ramesh

    2012-03-01

    This paper focuses on resolving long-standing limitations of parallax barriers by applying formal optimization methods. We consider two generalizations of conventional parallax barriers. First, we consider general two-layer architectures, supporting high-speed temporal variation with arbitrary opacities on each layer. Second, we consider general multi-layer architectures containing three or more light-attenuating layers. This line of research has led to two new attenuation-based displays. The High-Rank 3D (HR3D) display contains a stacked pair of LCD panels; rather than using heuristically-defined parallax barriers, both layers are jointly-optimized using low-rank light field factorization, resulting in increased brightness, refresh rate, and battery life for mobile applications. The Layered 3D display extends this approach to multi-layered displays composed of compact volumes of light-attenuating material. Such volumetric attenuators recreate a 4D light field when illuminated by a uniform backlight. We further introduce Polarization Fields as an optically-efficient and computationally efficient extension of Layered 3D to multi-layer LCDs. Together, these projects reveal new generalizations to parallax barrier concepts, enabled by the application of formal optimization methods to multi-layer attenuation-based designs in a manner that uniquely leverages the compressive nature of 3D scenes for display applications.

  8. Improving thermal barrier coatings by laser remelting.

    Science.gov (United States)

    Múnez, C J; Gómez-García, J; Sevillano, F; Poza, P; Utrilla, M V

    2011-10-01

    Thermal barrier coatings are extensively used to protect metallic components in applications where the operating conditions include aggressive environment at high temperatures. These coatings are usually processed by thermal spraying techniques and the resulting microstructure includes thin and large splats, associated with the deposition of individual droplets, with porosity between splats. This porosity reduces the oxidation and corrosion resistance favouring the entrance of aggressive species during service. To overcome this limitation, the top coat could be modified by laser glazing reducing surface roughness and sealing open porosity. ZrO2(Y2O3) top coat and NiCrAlY bond coating were air plasma sprayed onto an Inconel 600 Ni base alloy. The top coat was laser remelted and a densified ceramic layer was induced in the top surface of the ceramic coating. This layer inhibited the ingress of aggressive species and delayed bond coat oxidation.

  9. Technical barrier challenges

    Institute of Scientific and Technical Information of China (English)

    李思佳

    2014-01-01

    according to a famouse report,the foreign Technical Barriers to Trade(TBT)have some effects on the exports of the People’s Republic of China.Major findings are as follows:(1)TBT makes it more difficult for China to export;(2)TBT increases the costs of Chinese export commodities;(3)TBT causes friction and confilicts in the international trade;(4)SOME developed countries have moved their phase-outs to China and other developing countries,which have become victims of TBT.

  10. Support or Barrier?

    DEFF Research Database (Denmark)

    Sanden, Guro Refsum; Lønsmann, Dorte

    This study offers a critical look at how corporate-level language management influences front-line language practices among employees in three multinational corporations (MNCs) headquartered in Scandinavia. Based on interview and document data, we examine, firstly, what front-line practices...... employees use to cross language boundaries in their everyday work, and, secondly, how these practices relate to top-down language management in the case companies. Our findings show that employees are often dependent on ad hoc and informal solutions in cross- language situations, which leads us...... to a discussion of how a company’s language policy may be seen as both support and a barrier....

  11. [Barrier methods of contraception].

    Science.gov (United States)

    Goldsmith, A; Edelman, D A

    1982-01-01

    Vaginal methods of contraception were the earliest types used and some references to them date back to antiquity. Most of the vaginal contraceptive agents identified by the ancient Greeks, Indians, Japanese, and Chinese have been found in modern laboratory tests to have spermicidal properties, but it is doubtful that the methods were fully reliable or were used by many people. During the 19th century the condom, vaginal spermicides, and diaphragm became available. The development of nonoxynol-9 and other nonirritating but effective spermicidal agents improved vaginal contraceptives greatly by the 1950s, but starting in the 1960s newer methods began to replace the vaginal methods. Interest in barrier methods has been reawakened somewhat by concern about the health effects of hormonal methods. At present all barrier methods leave something to be desired. Failure rates of 3-30% for barrier methods in general have been estimated, but the higher rates are believed due to incorrect or inconsistent use. Theoretical failure rates of condoms and diaphragms have been estimated at 3/100 women-years, but in actual use failure rates may reach 15 for condoms and 13 for diaphragms used with spermicides. Use-effectiveness rates are greatly influenced by motivation. For a variety of reasons, the acceptability of barrier methods is low, especially in developing countries. New developments in spermicidal agents include sperm inhibitors, which impede the fertilizing capacity of sperm rather than attempting a spermicidal effect; a number of such agents have been studied and have proven more effective in animal tests than conventional spermicides. Neosampoon, a new spermicidal foam, has attracted an increasing number of users, especially in developing countries. A new condom, made of thin polymers and containing a standard dose of nonoxynol-9, has been designed to dissolve in the vaginal fluid. Further studies are needed of its acceptability, efficacy, and side effects before it becomes

  12. TBCs for better engine efficiency. [thermal barrier coatings

    Science.gov (United States)

    Brindley, William J.; Miller, Robert A.

    1989-01-01

    State-of-the-art thermal barrier coatings (TBCs) developed for aircraft engines can achieve both hot-section component operating temperature reductions and superior oxidation resistance. Such TBCs typically consist of two layers: a metallic, often NiCrAlY 'bond' inner layer in contact with the superalloy structural component, and an outer, insulating ceramic layer. A ceramic frequently used in this role due to its high durability is plasma-sprayed ZrO2, partially stabilized with 6-8 wt pct Y2O3. TBCs can also be useful in nonaircraft gas turbines, which frequently use highly contaminated fuels.

  13. Alternating InGaN barriers with GaN barriers for enhancing optical performance in InGaN light-emitting diodes

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Yujue; Zeng, Yiping, E-mail: ypzeng@semi.ac.cn [Key Laboratory of Semiconductor Materials Science, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083 (China)

    2015-01-21

    InGaN-based light-emitting diodes (LEDs) with some specific designs on the quantum barrier layers by alternating InGaN barriers with GaN barriers are proposed and studied numerically. In the proposed structure, simulation results show that the carriers are widely dispersed in the multi-quantum well active region, and the radiative recombination rate is efficiently improved and the electron leakage is suppressed accordingly, due to the appropriate band engineering. The internal quantum efficiency and light-output power are thus markedly enhanced and the efficiency droop is smaller, compared to the original structures with GaN barriers or InGaN barriers. Moreover, the gradually decrease of indium composition in the alternating quantum barriers can further promote the LED performance because of the more uniform carrier distribution, which provides us a simple but highly effective approach for high-performance LED applications.

  14. Barrier Coatings for Refractory Metals and Superalloys

    Energy Technology Data Exchange (ETDEWEB)

    SM Sabol; BT Randall; JD Edington; CJ Larkin; BJ Close

    2006-02-23

    In the closed working fluid loop of the proposed Prometheus space nuclear power plant (SNPP), there is the potential for reaction of core and plant structural materials with gas phase impurities and gas phase transport of interstitial elements between superalloy and refractory metal alloy components during service. Primary concerns are surface oxidation, interstitial embrittlement of refractory metals and decarburization of superalloys. In parallel with kinetic investigations, this letter evaluates the ability of potential coatings to prevent or impede communication between reactor and plant components. Key coating requirements are identified and current technology coating materials are reviewed relative to these requirements. Candidate coatings are identified for future evaluation based on current knowledge of design parameters and anticipated environment. Coatings were identified for superalloys and refractory metals to provide diffusion barriers to interstitial transport and act as reactive barriers to potential oxidation. Due to their high stability at low oxygen potential, alumina formers are most promising for oxidation protection given the anticipated coolant gas chemistry. A sublayer of iridium is recommended to provide inherent diffusion resistance to interstitials. Based on specific base metal selection, a thin film substrate--coating interdiffusion barrier layer may be necessary to meet mission life.

  15. Filaggrin and the great epidermal barrier grief.

    Science.gov (United States)

    McGrath, John A

    2008-05-01

    One of the principal functions of human skin is to form an effective mechanical barrier against the external environment. This involves the maturation and death of epidermal keratinocytes as well as the assembly of a complex network of differentially and spatially expressed proteins, glycoproteins and lipids into the keratinocyte cell membrane and surrounding extracellular space. In 2006, the key role of the granular cell layer protein filaggrin (filament-aggregating protein) in maintaining the skin barrier was determined with the identification of loss-of-function mutations in the profilaggrin gene (FLG). These mutations have been shown to be the cause of ichthyosis vulgaris and a major risk factor for the development of atopic dermatitis, asthma associated with atopic dermatitis as well as systemic allergies. Mutations in the FLG gene are extremely common, occurring in approximately 9% of individuals from European populations. The remarkable discovery of these widespread mutations is expected to have a major impact on the classification and management of many patients with ichthyosis and atopic disease. It is also hoped that the genetic discovery of FLG mutations will lead to the future development of more specific, non-immunosuppressive treatments capable of restoring effective skin barrier function and alleviating or preventing disease in susceptible individuals.

  16. Oxynitride Thin Film Barriers for PV Packaging

    Energy Technology Data Exchange (ETDEWEB)

    Glick, S. H.; delCueto, J. A.; Terwilliger, K. M.; Jorgensen, G. J.; Pankow, J. W.; Keyes, B. M.; Gedvilas, L. M.; Pern, F. J.

    2005-11-01

    Dielectric thin-film barrier and adhesion-promoting layers consisting of silicon oxynitride materials (SiOxNy, with various stoichiometry) were investigated. For process development, films were applied to glass (TCO, conductive SnO2:F; or soda-lime), polymer (PET, polyethylene terephthalate), aluminized soda-lime glass, or PV cell (a-Si, CIGS) substrates. Design strategy employed de-minimus hazard criteria to facilitate industrial adoption and reduce implementation costs for PV manufacturers or suppliers. A restricted process window was explored using dilute compressed gases (3% silane, 14% nitrous oxide, 23% oxygen) in nitrogen (or former mixtures, and 11.45% oxygen mix in helium and/or 99.999% helium dilution) with a worst-case flammable and non-corrosive hazard classification. Method employed low radio frequency (RF) power, less than or equal to 3 milliwatts per cm2, and low substrate temperatures, less than or equal to 100 deg C, over deposition areas less than or equal to 1000 cm2. Select material properties for barrier film thickness (profilometer), composition (XPS/FTIR), optical (refractive index, %T and %R), mechanical peel strength and WVTR barrier performance are presented.

  17. Nanomedicine Faces Barriers

    Directory of Open Access Journals (Sweden)

    Paul Debbage

    2010-10-01

    Full Text Available Targeted nanoparticles have the potential to improve drug delivery efficiencies by more than two orders of magnitude, from the ~ 0.1% which is common today. Most pharmacologically agents on the market today are small drug molecules, which diffuse across the body’s blood-tissue barriers and distribute not only into the lesion, but into almost all organs. Drug actions in the non-lesion organs are an inescapable part of the drug delivery principle, causing “side-effects” which limit the maximally tolerable doses and result in inadequate therapy of many lesions. Nanoparticles only cross barriers by design, so side-effects are not built into their mode of operation. Delivery rates of almost 90% have been reported. This review examines the significance of these statements and checks how far they need qualification. What type of targeting is required? Is a single targeting sufficient? What new types of clinical challenge, such as immunogenicity, might attend the use of targeted nanoparticles?

  18. Higgs vacua behind barriers

    CERN Document Server

    Tamarit, Carlos

    2014-01-01

    Scenarios in which the Higgs vacuum arises radiatively and separated from the origin by a potential barrier at zero temperature are known to be attainable in models with extra singlet scalars, which in the limit of zero barrier height give rise to Coleman-Weinberg realizations of electroweak symmetry breaking. However, this requires large values of Higgs-portal couplings or a large number N of singlets. This is quantified in detail by considering, for varying N, the full two-loop effective potential at zero temperature, as well as finite temperature effects including the dominant two-loop corrections due to the singlets. Despite the large couplings, two-loop effects near the electroweak scale are under control, and actually better behaved in models with larger couplings yet fewer singlets. Strong first-order phase transitions are guaranteed even in the Coleman-Weinberg scenarios. Cubic Higgs couplings and Higgs associated-production cross sections exhibit deviations from the Standard Model predictions which c...

  19. Synthetic Eelgrass Oil Barrier

    Science.gov (United States)

    Curtis, T. G.

    2013-05-01

    Although surviving in situ micro-organisms eventually consume spilled oil, extensive inundation of shore biota by oil requires cleanup to enable ecological recovery within normal time scales. Although effective in calm seas and quiet waters, oil is advected over and under conventional curtain oil booms by wave actions and currents when seas are running. Most sorbent booms are not reusable, and are usually disposed of in landfills, creating excessive waste. A new concept is proposed for a floating oil barrier, to be positioned off vulnerable coasts, to interdict, contain, and sequester spilled oil, which can then be recovered and the barrier reused. While conventional oil boom designs rely principally on the immiscibility of oil in water and its relative buoyancy, the new concept barrier avoids the pitfalls of the former by taking advantage of the synergistic benefits of numerous fluid and material properties, including: density, buoyancy, elasticity, polarity, and surface area to volume ratio. Modeled after Zostera marina, commonly called eelgrass, the new barrier, referred to as synthetic eelgrass (SE), behaves analogously. Eelgrass has very long narrow, ribbon-like, leaves which support periphyton, a complex matrix of algae and heterotrophic microbes, which position themselves there to extract nutrients from the seawater flowing past them. In an analogous fashion, oil on, or in, seawater, which comes in contact with SE, is adsorbed on the surface and sequestered there. Secured to the bottom, in shoal waters, SE rises to the surface, and, if the tide is low enough, floats on the sea surface down wind, or down current to snare floating oil. The leaves of SE, called filaments, consist of intrinsically buoyant strips of ethylene methyl acrylate, aka EMA. EMA, made of long chain, saturated, hydrocarbon molecules with nearly homogeneous electron charge distributions, is a non-polar material which is oleophilic and hydrophobic. Oil must be in close proximity to the

  20. Development of dual-band barrier detectors

    Science.gov (United States)

    Plis, Elena; Myers, Stephen A.; Ramirez, David A.; Krishna, Sanjay

    2016-05-01

    We report on the development of dual-band InAs/GaSb type-II strained layer superlattices (T2SL) detectors with barrier designs at SK Infrared. Over the past five years, we demonstrated mid-wave/long-wave (MW/LWIR, cut-off wavelengths are 5 μm and 10.0 μm), and LW/LWIR (cut-off wavelengths are 9 μm and 11.0 μm) detectors with nBn and pBp designs. Recent results include a high performance bias-selectable long/long-wavelength infrared photodetector based on T2SL with a pBp barrier architecture. The two channels 50% cut-off wavelengths were ~ 9.2 μm and ~ 12 μm at 77 K. The "blue" and "red" LWIR absorbers demonstrated saturated QE values of 34 % and 28 %, respectively, measured in a backside illuminated configuration with a ~ 35 μm thick layer of residual GaSb substrate. Bulk-limited dark current levels were ~ 2.6 x 10-7 A/cm2 at + 100 mV and ~ 8.3 x 10-4 A/cm2 at - 200 mV for the "blue" and "red" channels, respectively.

  1. Multilayer Article Characterized by Low Coefficient of Thermal Expansion Outer Layer

    Science.gov (United States)

    Lee, Kang N. (Inventor)

    2004-01-01

    A multilayer article comprises a substrate comprising a ceramic or a silicon-containing metal alloy. The ceramic is a Si-containing ceramic or an oxide ceramic with or without silicon. An outer layer overlies the substrate and at least one intermediate layer is located between the outer layer and thc substrate. An optional bond layer is disposed between thc 1 least one intermediate layer and thc substrate. The at least one intermediate layer may comprise an optional chemical barrier layer adjacent the outer layer, a mullite-containing layer and an optional chemical barrier layer adjacent to the bond layer or substrate. The outer layer comprises a compound having a low coefficient of thermal expansion selected from one of the following systems: rare earth (RE) silicates; at least one of hafnia and hafnia-containing composite oxides; zirconia-containing composite oxides and combinations thereof.

  2. Effect of Co3O4 and Co3O4/CeO2 infiltration on the catalytic and electro-catalytic activity of LSM15/CGO10 porous cells stacks for oxidation of propene

    DEFF Research Database (Denmark)

    Ippolito, Davide; Kammer Hansen, Kent

    2015-01-01

    The objective of this work was to study the effect of Co3O4 and Co3O4/CeO2 infiltration on the propene oxidation catalytic activity of a La0.85Sr0.15MnO3/Ce0.9Gd0.1O1.95 electrochemical porous cell stack (11 layers, 5 single cells in series). The effect of the infiltration of Co3O4 and Co3O4/CeO2...... on the electrochemical properties of the porous cell stack was also investigated by electrochemical impedance spectroscopy (EIS). Co3O4 and Co3O4/CeO2 exhibited high catalytic activity for propene oxidation. The increase of propene oxidation rate with +4 V (0.8 V/cell) polarization reached 10% for the Co3O4 infiltrated...... reactor and 48% of efficiency at 300 °C. The Co3O4/CeO2 co-infiltration decreased the reactor polarization resistance, while Co3O4 infiltration had negligible effect on reactor electrochemical performance. The beneficial effect of CeO2 on the electrode activity was attributed to the increased...

  3. Barriers for recess physical activity

    DEFF Research Database (Denmark)

    Pawlowski, Charlotte Skau; Tjørnhøj-Thomsen, Tine; Schipperijn, Jasper

    2014-01-01

    BACKGROUND: Many children, in particular girls, do not reach the recommended amount of daily physical activity. School recess provides an opportunity for both boys and girls to be physically active, but barriers to recess physical activity are not well understood. This study explores gender...... differences in children's perceptions of barriers to recess physical activity. Based on the socio-ecological model four types of environmental barriers were distinguished: natural, social, physical and organizational environment. METHODS: Data were collected through 17 focus groups (at 17 different schools...... this study, we recommend promoting recess physical activity through a combination of actions, addressing barriers within the natural, social, physical and organizational environment....

  4. There are many barriers to species' migrations

    Directory of Open Access Journals (Sweden)

    Kenneth J Feeley

    2014-06-01

    Full Text Available Temperature-change trajectories are being used to identify the geographic barriers and thermal ‘cul-de-sacs’ that will limit the ability of many species to track climate change by migrating. We argue that there are many other potential barriers to species’ migrations. These include stable ecotones, discordant shifts in climatic variables, human land use, and species’ limited dispersal abilities. To illustrate our argument, for each 0.5° latitude/longitude grid cell of the Earth’s land surface, we mapped and tallied the number of cells for which future (2060–2080 climate represents an analog of the focal cell’s current climate. We compared results when only considering temperature with those for which both temperature and total annual precipitation were considered in concert. We also compared results when accounting for only geographic barriers (no cross-continental migration with those involving both geographic and potential ecological barriers (no cross-biome migration. As expected, the number of future climate analogs available to each pixel decreased markedly with each added layer of complexity (e.g. the proportion of the Earth’s land surface without any available future climate analogs increased from 3% to more than 36% with the inclusion of precipitation and ecological boundaries. While including additional variables can increase model complexity and uncertainty, we must strive to incorporate the factors that we know will limit species’ ranges and migrations if we hope to predict the effects of climate change at a high-enough degree of accuracy to guide management decisions.

  5. Analytical investigation of thermal barrier coatings for advanced power generation combustion turbines

    Science.gov (United States)

    Amos, D. J.

    1977-01-01

    An analytical evaluation was conducted to determine quantitatively the improvement potential in cycle efficiency and cost of electricity made possible by the introduction of thermal barrier coatings to power generation combustion turbine systems. The thermal barrier system, a metallic bond coat and yttria stabilized zirconia outer layer applied by plasma spray techniques, acts as a heat insulator to provide substantial metal temperature reductions below that of the exposed thermal barrier surface. The study results show the thermal barrier to be a potentially attractive means for improving performance and reducing cost of electricity for the simple, recuperated, and combined cycles evaluated.

  6. Linguistic Barriers and Bridges

    DEFF Research Database (Denmark)

    Thuesen, Frederik

    2016-01-01

    and intercultural communication, this article analyses interviews with 31 employees from two highly ethnically diverse Danish workplaces. The article shows how linguistic barriers such as different levels of majority language competence and their consequent misunderstandings breed mistrust and hostility, whilst......The influence of language on social capital in low-skill and ethnically diverse workplaces has thus far received very limited attention within the sociology of work. As the ethnically diverse workplace is an important social space for the construction of social relations bridging different social...... groups, the sociology of work needs to develop a better understanding of the way in which linguistic diversity influences the formation of social capital, i.e. resources such as the trust and reciprocity inherent in social relations in such workplaces. Drawing on theories about intergroup contact...

  7. Countermeasures and barriers

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, Johannes [Oersted - DTU, Automation, Kgs. Lyngby (Denmark)

    2005-10-01

    In 1973 Haddon proposed ten strategies for reducing and avoiding damages based on a model of potential harmful energy transfer (Haddon, 1973). The strategies apply to a large variety of unwanted phenomena. Haddon's pioneering work on countermeasures has had a major influence on later thinking about safety. Considering its impact it is remarkable that the literature offers almost no discussions related to the theoretical foundations of Haddon's countermeasure strategies. The present report addresses a number of theoretical issues related to Haddon's countermeasure strategies, which are: 1) A reformulation and formalization of Haddon's countermeasure strategies. 2) An identification and description of some of the problems associated with the term 'barrier'. 3) Suggestions for a more precise terminology based on the causal structure of countermeasures. 4) Extending the scope of countermeasures to include sign-based countermeasures. (au)

  8. High-performance lanthanum-ferrite-based cathode for SOFC

    DEFF Research Database (Denmark)

    Wang, W.G.; Mogensen, Mogens Bjerg

    2005-01-01

    (La0.6Sr0.4)(1-x)Co0.2Fe0.8O3/Ce0.9Gd0.1O3 (LSCF/CGO) composite cathodes were investigated for SOFC application at intermediate temperature, i.e., 500-700 degreesC. The LSCF/CGO cathodes have been studied on three types of tape-casted electrolyte substrates including CGO electrolyte, Yttrium......C were obtained using LSCF/CGO cathode on CGO electrolyte. On the YSZ electrolyte with thin layer CGO coating, R-p of 0.6 Omega cm(2) at 600 degreesC and 0.12 Omega cm(2) at 700 degreesC were obtained. On the YSZ electrolyte directly, R-p of 1.0 Omega cm(2) at 600 degreesC and 0.13 Omega cm(2) at 700...... degreesC were achieved. These results are roughly six times better than our typical LSM cathodes. Slightly higher R-s was observed in the samples with LSCF/CGO cathode on the YSZ electrolyte with CGO coating due to extra contribution from the thin CGO layer and the CGO/YSZ interface. For the samples...

  9. Alumina Paste Sublimation Suppression Barrier for Thermoelectric Device

    Science.gov (United States)

    Paik, Jong-Ah (Inventor); Caillat, Thierry (Inventor)

    2014-01-01

    Alumina as a sublimation suppression barrier for a Zintl thermoelectric material in a thermoelectric power generation device operating at high temperature, e.g. at or above 1000K, is disclosed. The Zintl thermoelectric material may comprise Yb.sub.14MnSb.sub.11. The alumina may be applied as an adhesive paste dried and cured on a substantially oxide free surface of the Zintl thermoelectric material and polished to a final thickness. The sublimation suppression barrier may be finalized by baking out the alumina layer on the Zintl thermoelectric material until it becomes substantially clogged with ytterbia.

  10. Microlaminate composites: An alternate approach to thermal barrier coatings

    Science.gov (United States)

    Bunshah, R. F.; Deshpandey, C. V.; Obrien, B. P.

    1985-01-01

    Ceramic thermal barrier coatings suffer from a major drawback, i.e., brittle behavior. An alternate approach is microlaminate composite coatings consisting of alternate layers of metal and oxide. As the thickness of the individual laminae decrease while keeping the total thickness of the coating constant, the thermal conductivity drops markedly. Data on the Fe-Cu system will be presented. A model is proposed for an MCrAlY-Al2O3 microlaminate coating for thermal barriers. The methods of fabrication will also be discussed.

  11. Life Time Performance Characterization of Solid Oxide Electrolysis Cells for Hydrogen Production

    DEFF Research Database (Denmark)

    Sun, Xiufu; Chen, Ming; Liu, Yi-Lin

    2015-01-01

    is needed. Solid oxide electrolysis cells (SOECs) offer a promising technological solution for efficient energy conversion and production of hydrogen or syngas (mixture of H2 and CO) using excess electricity from renewable energy sources. For SOECs to become commercially interesting, performance, durability......, a YSZ electrolyte, a gadolinia doped ceria (CGO) barrier layer and a LSCF/CGO (LSCF: strontium and cobalt co-doped lanthanum ferrite) composite oxygen electrode. The cells were exposed to long-term galvanostatic electrolysis tests at different current densities from 0 (i.e. under open circuit voltage...... generation SOEC cells produced at DTU are able to be operated at current density up to ~-0.9 A/cm2, in order to achieve a commercialization target of 5 years lifetime (for continuous electrolysis operation of hydrogen production). The cells can be operated at even higher current density, if the hydrogen...

  12. SOFC LSM:YSZ cathode degradation induced by moisture: An impedance spectroscopy study

    DEFF Research Database (Denmark)

    Nielsen, Jimmi; Mogensen, Mogens Bjerg

    2011-01-01

    The cause of the degradation effect of moisture during operation of LSM cathode based SOFCs has been investigated by means of a detailed impedance characterization on LSM:YSZ composite cathode based SOFCs. Further the role of YSZ as cathode composite material was studied by measurements on SOFCs...... with a LSM:CGO composite cathode on a CGO interdiffusion barrier layer. It was found that both types of cathodes showed similar electrochemical characteristics towards the presence of moisture during operation. Upon addition and removal of moisture in the fed air the impedance study showed a change...... in the high frequency cathode arc, which is associated with the charge transport/transfer at the LSM/YSZ interface. On prolonged operation with the presence of moisture an ongoing increase in the high frequency cathode arc resulted in a permanent loss of cathode/electrolyte contact and thus increase...

  13. Hanford Permanent Isolation Barrier Program: Asphalt technology development

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, H.D.; Romine, R.A.

    1994-11-01

    An important component of the Hanford Permanent Isolation Barrier is the use of a two-layer composite asphalt system, which provides backup water diversion capabilities if the primary capillary barrier fails to meet infiltration goals. Because of asphalt`s potential to perform to specification over the 1000-year design life criterion, a composite asphalt barrier (HMAC/fluid-applied polymer-modified asphalt) is being considered as an alternative to the bentonite clay/high density poly(ethylene) barriers for the low-permeability component of the Hanford Permanent Isolation Barrier. The feasibility of using asphalt as a long-term barrier is currently being studied. Information that must be known is the ability of asphalt to retain desirable physical properties over a period of 1000 years. This paper presents the approach for performing accelerated aging tests and evaluating the performance of samples under accelerated conditions. The results of these tests will be compared with asphalt artifact analogs and the results of modeling the degradation of the selected asphalt composite to make life-cycle predictions.

  14. Long term performance of the Waterloo denitrification barrier

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, W.D.; Cherry, J.A. [Univ. of Waterloo, Ontario (Canada)

    1997-12-31

    Beginning in 1991 a series of laboratory tests and small scale field trials were initiated to test the performance of an innovative permeable reactive barrier for treatment of nitrate from septic systems. The barrier promotes denitrification by providing an energy source in the form of solid organic carbon mixed into the porous media material. Advantages of the system for nitrate treatment are that the reaction is passive and in situ and it is possible to incorporate sufficient carbon mass in conveniently sized barriers to potentially provide treatment for long periods (decades) without the necessity for maintenance. However, longevity can only be demonstrated by careful long term monitoring of field installations. This paper documents four years of operating history at three small scale field trials; two where the denitrification barrier is installed as a horizontal layer positioned in the unsaturated zone below conventional septic system infiltration beds and one where the barrier is installed as a vertical wall intercepting a septic system plume at a downgradient location. The barriers have successfully attenuated 50-100% of NO{sup -}{sub 3}-N levels of up to 170 mg/L and treatment has remained consistent over the four year period in each case, thus considerable longevity is indicated. Other field trials have demonstrated this technology to be equally effective in treating nitrogen contamination from other sources such as landfill leachate and farm field runoff.

  15. Barriers to Women in Science

    Science.gov (United States)

    Butler, Rosemary

    2013-01-01

    The Presiding Officer of the National Assembly for Wales, Rosemary Butler AM, has put the issue of barriers to women in public life at the top of the political agenda in Wales. She has held sessions with women across Wales to find out what those barriers are and how they can be tackled. On International Women's Day in February, she invited…

  16. Spanning trees crossing few barriers

    NARCIS (Netherlands)

    Asano, T.; Berg, M. de; Cheong, O.; Guibas, L.J.; Snoeyink, J.; Tamaki, H.

    2002-01-01

    We consider the problem of finding low-cost spanning trees for sets of n points in the plane, where the cost of a spanning tree is defined as the total number of intersections of tree edges with a given set of m barriers. We obtain the following results: (i) if the barriers are possibly intersecting

  17. BARRIERS OF STRATEGIC ALLIANCES ORGANIZATION

    Directory of Open Access Journals (Sweden)

    Vladislav M. Sannikov

    2014-01-01

    Full Text Available General barriers of organization of different types of strategic alliances have beenconsidered in the article. There are several recommendations for overcoming themin cases of international alliances, and in case of work in one state. The article also identified goals and tasks of single coordination center of alliance to overcome organization barriers.

  18. Informal export barriers and poverty

    OpenAIRE

    Porto, Guido G.

    2004-01-01

    The author investigates the poverty impacts of informal export barriers like transport costs, cumbersome customs practices, costly regulations, and bribes. He models these informal barriers as export taxes that distort the efficient allocation of resources. In low-income agricultural economies, this distortion lowers wages and household agricultural income, thereby leading to higher pover...

  19. Epistemological barriers to radical behaviorism.

    Science.gov (United States)

    O'Donohue, W T; Callaghan, G M; Ruckstuhl, L E

    1998-01-01

    The historian and philosopher of science Gaston Bachelard proposed the concept of epistemological barriers to describe the intellectual challenges encountered by scientists in their work. In order to embrace novel ways of approaching a problem in science, scientists must overcome barriers or obstacles posed by their prior views. For example, Einsteinian physics presents scientists with claims that space is curved and that time and space are on the same continuum. We utilize Bachelard's concept of epistemological barriers to describe the differences between the intellectual journeys students pursuing advanced studies face when attempting to accept cognitive psychology or radical behaviorism. We contend that the folk psychological beliefs that students typically hold when entering these studies pose less challenge to cognitive psychology than to radical behaviorism. We also suggest that these barriers may also partly be involved in the problematic exegesis that has plagued radical behaviorism. In close, we offer some suggestions for dealing with these epistemological barriers.

  20. Epistemological barriers to radical behaviorism

    Science.gov (United States)

    O'Donohue, William T.; Callaghan, Glenn M.; Ruckstuhl, L. E.

    1998-01-01

    The historian and philosopher of science Gaston Bachelard proposed the concept of epistemological barriers to describe the intellectual challenges encountered by scientists in their work. In order to embrace novel ways of approaching a problem in science, scientists must overcome barriers or obstacles posed by their prior views. For example, Einsteinian physics presents scientists with claims that space is curved and that time and space are on the same continuum. We utilize Bachelard's concept of epistemological barriers to describe the differences between the intellectual journeys students pursuing advanced studies face when attempting to accept cognitive psychology or radical behaviorism. We contend that the folk psychological beliefs that students typically hold when entering these studies pose less challenge to cognitive psychology than to radical behaviorism. We also suggest that these barriers may also partly be involved in the problematic exegesis that has plagued radical behaviorism. In close, we offer some suggestions for dealing with these epistemological barriers. PMID:22478314

  1. Novel hybrid polymeric materials for barrier coatings

    Science.gov (United States)

    Pavlacky, Erin Christine

    Polymer-clay nanocomposites, described as the inclusion of nanometer-sized layered silicates into polymeric materials, have been widely researched due to significant enhancements in material properties with the incorporation of small levels of filler (1--5 wt.%) compared to conventional micro- and macro-composites (20--30 wt.%). One of the most promising applications for polymer-clay nanocomposites is in the field of barrier coatings. The development of UV-curable polymer-clay nanocomposite barrier coatings was explored by employing a novel in situ preparation technique. Unsaturated polyesters were synthesized in the presence of organomodified clays by in situ intercalative polymerization to create highly dispersed clays in a precursor resin. The resulting clay-containing polyesters were crosslinked via UV-irradiation using donor-acceptor chemistry to create polymer-clay nanocomposites which exhibited significantly enhanced barrier properties compared to alternative clay dispersion techniques. The impact of the quaternary alkylammonium organic modifiers, used to increase compatibility between the inorganic clay and organic polymer, was studied to explore influence of the organic modifier structure on the nanocomposite material properties. By incorporating just the organic modifiers, no layered silicates, into the polyester resins, reductions in film mechanical and thermal properties were observed, a strong indicator of film plasticization. An alternative in situ preparation method was explored to further increase the dispersion of organomodified clay within the precursor polyester resins. In stark contrast to traditional in situ polymerization methods, a novel "reverse" in situ preparation method was developed, where unmodified montmorillonite clay was added during polyesterification to a reaction mixture containing the alkylammonium organic modifier. The resulting nanocomposite films exhibited reduced water vapor permeability and increased mechanical properties

  2. MgB2 wires with Ti and NbTi barrier made by IMD process

    Science.gov (United States)

    Kováč, P.; Hušek, I.; Kulich, M.; Melišek, T.; Kováč, J.; Kopera, L.

    2016-10-01

    MgB2 wires with Ti and NbTi barriers have been made by internal magnesium diffusion (IMD) into boron process. Critical currents, strain tolerances and AC loss of wires with Ti and NbTi barriers have been compared. It was shown that worse uniformity of NbTi barrier affects the creation of regular MgB2 layer and consequently influences (reduces) also the current densities. Positive effects of NbTi barrier are in improved strain tolerance and reduced coupling losses. The maximum AC loss of not twisted wire with Ti barrier is measured at frequency 9 Hz, but it is shifted up to 60 Hz for NbTi due to considerably increased barrier resistance at 20 K.

  3. Infiltration of SOFC Stacks: Evaluation of the Electrochemical Performance Enhancement and the Underlying Changes in the Microstructure

    DEFF Research Database (Denmark)

    Kiebach, Wolff-Ragnar; Zielke, Philipp; Høgh, Jens Valdemar Thorvald;

    2016-01-01

    Experimental SOFC stacks with 10 SOFCs (LSM-YSZ/YSZ/Ni-YSZ) were infiltrated with CGO and Ni-CGO on the air and fuel side, respectively in an attempt to counter degradation and improve the output. The electrochemical performance of each cell was characterized (i) before infiltration, (ii) after...... infiltration on the cathode side, and (iii) after the infiltration of the anode side. A significant performance enhancement was observed after the infiltration with CGO on the cathode, while the infiltration of the anode side with Ni-CGO had no significant effect on the electrochemical performance. After...... testing the cells were characterized by SEM and TEM/EELS. A thin layer of CGO nanoparticles around the LSM-YSZ back bone structure was found after infiltration. On the anode side nano sized Ni particles were found embedded in a CGO layer formed around the Ni-YSZ structure. EELS analysis showed...

  4. The complex influences of back-barrier deposition, substrate slope and underlying stratigraphy in barrier island response to sea-level rise: Insights from the Virginia Barrier Islands, Mid-Atlantic Bight, U.S.A.

    Science.gov (United States)

    Brenner, Owen T.; Moore, Laura J.; Murray, A. Brad

    2015-10-01

    To understand the relative importance of back barrier environment, substrate slope and underlying stratigraphy in determining barrier island response to RSLR (relative sea-level rise), we use a morphological-behavior model (GEOMBEST) to conduct a series of sensitivity experiments, based on late-Holocene hindcast simulations of an island in the U.S. mid-Atlantic Bight (Metompkin Island, VA) having both salt marsh and lagoonal back-barrier environments, and we draw comparisons between these results and future simulations (2000-2100 AD) of island response to RSLR. Sensitivity analyses indicate that, as a whole, the island is highly sensitive to factors that reduce overall sand availability (i.e., high sand-loss rates and substrates containing little sand). Results also indicate that for all predicted future RSLR scenarios tested, islands having high substrate sand proportions (if allowed to migrate freely) will likely remain subaerial for centuries because of sufficient substrate sand supply and elevation to assist in keeping islands above sea level. Simulation results also lead to basic insights regarding the interactions among substrate slope, back-barrier deposition and island migration rates. In contrast to previous studies, which suggest that changes in substrate slope directly affect the island migration trajectory, we find that-in the presence of back-barrier deposition-the connection between substrate slope and island behavior is modulated (i.e., variability in migration rates is dampened) by changes in back-barrier width. These interactions-which tend to produce changes in shoreface sand content-lead to a negative feedback when the back-barrier deposit contains less sand than the underlying layer, resulting in a stable back-barrier width. Alternatively, a positive feedback arises when the back-barrier deposit contains more sand than the underlying layer, resulting in either back-barrier disappearance or perpetual widening.

  5. Development of engineered barrier

    Energy Technology Data Exchange (ETDEWEB)

    Chun, Kwan Sik; Cho, Won Jin; Lee, Jae Owan; Kim, Seung Soo; Kang, Mu Ja

    1999-03-01

    Engineered barrier development was carried out into the three research fields : waste form, disposal container, and buffer. The waste form field dealt with long-term leaching tests with borosilicate waste glasses surrounded by compacted bentonite. The leach rate decreased with increasing time, and was higher for the waste specimen rich in U and Na. In the container field, preliminary concepts of disposal containers were recommended by conducting structural analysis, thermal analysis, and shielding analysis, and major properties of stainless steel, copper, and titanium as a container material were surveyed. The sensitization degrees of SUS 316 and316L were lower than those of SUS 304 and 304L, respectively. The crevice corrosion of sensitized stainless steel was sensitive to the content of salt. Researches into the buffer included establishment of its performance criteria followed by investigating major properties of buffer using potential material in Korea. Experiments were made for measuring hydraulic conductivities, swelling properties, mechanical properties, thermal conductivities, pore-water chemistry properties, and adsorption properties was also investigated. (author)

  6. Method of Producing Controlled Thermal Expansion Coat for Thermal Barrier Coatings

    Science.gov (United States)

    Brindley, William J. (Inventor); Miller, Robert A. (Inventor); Aikin, Beverly J. M. (Inventor)

    2000-01-01

    An improved thermal barrier coating and method for producing and applying such is disclosed herein. The thermal barrier coatings includes a high temperature substrate, a first bond coat layer applied to the substrate of MCrAlX and a second bond coat layer of MCrAlX with particles of a particulate dispersed throughout the MCrAlX and the preferred particulate is Al2O3. The particles of the particulate dispersed throughout the second bond coat layer preferably have a diameter of less then the height of the peaks of the second bond coat layer or a diameter of less than 5 micron. The method of producing the second bond coat layer may either include the steps of mechanical alloying of particles throughout the second bond coat layer, attrition milling the particles of the particulate throughout the second bond coat layer, or using electrophoresis to disperse the particles throughout the second bond coat layer. In the preferred embodiment of the invention the first bond coat layer is applied to the substrate. and then the second bond coat layer is thermally sprayed onto the first bond coat layer. Further, in a preferred embodiment of the invention a ceramic insulating layer covers the second bond coat layer.

  7. Evaluating the long-term hydrology of an evapotranspiration-capillary barrier with a 1000 year design life: HYDROLOGY OF A 1000 YEAR ETC BARRIER

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Z. Fred [Hydrology Group, Earth Systems Science Division, Pacific Northwest National Laboratory, Richland Washington USA

    2016-06-01

    A surface barrier (or cover) is a commonly used technology for subsurface remediation. A key function of the barrier is to reduce or eliminate the movement of meteoric precipitation into the underlying waste zone, where it could mobilize and transport contaminants. Surface barriers are expected to perform for centuries to millennia, yet there are very few examples of performance for periods longer than a decade. The Prototype Hanford Barrier was constructed in 1994 over an existing waste site to demonstrate its long-term performance for a design period of 1000 years. This barrier is a field-scale evapotranspiration-capillary (ETC) barrier. In this design, the storage layer consists of 2-m-thick silt loam. The 19-year monitoring results show that the store-and-release mechanism for the ETC barrier worked efficiently as the storage layer was recharged in the winter season (November to March) and the stored water was released to the atmosphere in the summer season (April to October) via soil evaporation and plant transpiration. The capillary break functioned normally in improving the storage capacity and minimizing drainage. The maximum drainage observed through the ET barrier at any of the monitoring stations was only 0.178 mm yr-1 (under an enhanced precipitation condition), which is less than the design criterion. A very small amount (2.0 mm yr-1 on average) of runoff was observed during the 19-year monitoring period. The observed storage capacity of the storage layer was considerably (39%) larger than the estimated value based on the method of equilibrium of water pressure. After a controlled fire in 2008, the newly grown vegetation (primarily shallow-rooted grasses) could still release the stored water and summer precipitation to the atmosphere via transpiration. The findings are useful for predicting water storage and ET under different precipitation conditions and for the design of future barriers.

  8. Microstructures and Mechanical Properties of Ceramic/Metal Gradient Thermal Barrier Coatings

    Institute of Scientific and Technical Information of China (English)

    XIAO Jin-sheng; JIANG Bing; LIU Jie; HUANG Shi-yong

    2003-01-01

    The ceramic/metal gradient thermal barrier coatings (CMGTBCs) which combined the conceptions of thermal barrier coatings ( TBG ) and functional gradient materials ( FGMs ) are investigated. The structure model studied in this paper is a general model which includes four different layers: pure ceramic layer , ceramic/metal gradient layer, pure metal layer, and substrate layer. The microstructures of gradient layer have different ceramics and metal volume fraction profile along with the direction of thickness. The profile function used to describe the gradient microstructures can be expressed in power-law or polynomial expression. The mechanical properties of CMGTBCs are obtained by means of microscopic mechanics. As special cases, the interactive solutions are given by Mori- Tanaka method, and the non- interactive solutions by dilute solution. The Young's modulus calculated by these methods are compared with those by other methods , e g, the rule of mixtures.

  9. Barrier height enhancement of InP-based n-Ga(0.47)In(0.53)As Schottky-barrier diodes grown by molecular beam epitaxy

    Science.gov (United States)

    Kim, J. H.; Li, S. S.; Figueroa, L.

    1988-01-01

    Barrier height enhancement of an InP-based p(+)n-Ga(0.47)In(0.53)As Schottky diode grown by MBE has been demonstrated for infra-red photodetector applications. A barrier height of 0.35 eV for n-Ga(0.47)In(0.53)As Schottky barrier diodes, was increased to the effective barrier height of 0.55 eV, with a p(+)-Ga(0.47)In(0.53)As surface layer of 30 nm thick. The results show a reverse leakage current density of 0.0015 A/sq cm and a junction capacitance of 0.3 pF, which are comparable to those of p-Ga(0.47)In(0.53)As Schottky-barrier diodes at a reverse bias voltage of 5 V.

  10. Fermi level de-pinning of aluminium contacts to n-type germanium using thin atomic layer deposited layers

    Energy Technology Data Exchange (ETDEWEB)

    Gajula, D. R., E-mail: dgajula01@qub.ac.uk; Baine, P.; Armstrong, B. M.; McNeill, D. W. [School of Electronics, Electrical Engineering and Computer Science, Queen' s University Belfast, Ashby Building, Stranmillis Road, Belfast BT9 5AH (United Kingdom); Modreanu, M.; Hurley, P. K. [Tyndall National Institute, University College Cork, Lee Maltings, Cork (Ireland)

    2014-01-06

    Fermi-level pinning of aluminium on n-type germanium (n-Ge) was reduced by insertion of a thin interfacial dielectric by atomic layer deposition. The barrier height for aluminium contacts on n-Ge was reduced from 0.7 eV to a value of 0.28 eV for a thin Al{sub 2}O{sub 3} interfacial layer (∼2.8 nm). For diodes with an Al{sub 2}O{sub 3} interfacial layer, the contact resistance started to increase for layer thicknesses above 2.8 nm. For diodes with a HfO{sub 2} interfacial layer, the barrier height was also reduced but the contact resistance increased dramatically for layer thicknesses above 1.5 nm.

  11. Ultraviolet photodetectors based on ZnO nanorods-seed layer effect and metal oxide modifying layer effect

    Directory of Open Access Journals (Sweden)

    Zhou Hai

    2011-01-01

    Full Text Available Abstract Pt/ZnO nanorod (NR and Pt/modified ZnO NR Schottky barrier ultraviolet (UV photodetectors (PDs were prepared with different seed layers and metal oxide modifying layer materials. In this paper, we discussed the effect of metal oxide modifying layer on the performance of UV PDs pre- and post-deposition annealing at 300°C, respectively. For Schottky barrier UV PDs with different seed layers, the MgZnO seed layer-PDs without metal oxide coating showed bigger responsivity and larger detectivity (Dλ* than those of PDs with ZnO seed layer, and the reason was illustrated through energy band theory and the electron transport mechanism. Also the ratio of D254* to D546* was calculated above 8 × 102 for all PDs, which demonstrated that our PDs showed high selectivity for detecting UV light with less influence of light with long wavelength.

  12. Ultraviolet photodetectors based on ZnO nanorods-seed layer effect and metal oxide modifying layer effect.

    Science.gov (United States)

    Zhou, Hai; Fang, Guojia; Liu, Nishuang; Zhao, Xingzhong

    2011-02-15

    Pt/ZnO nanorod (NR) and Pt/modified ZnO NR Schottky barrier ultraviolet (UV) photodetectors (PDs) were prepared with different seed layers and metal oxide modifying layer materials. In this paper, we discussed the effect of metal oxide modifying layer on the performance of UV PDs pre- and post-deposition annealing at 300°C, respectively. For Schottky barrier UV PDs with different seed layers, the MgZnO seed layer-PDs without metal oxide coating showed bigger responsivity and larger detectivity (Dλ*) than those of PDs with ZnO seed layer, and the reason was illustrated through energy band theory and the electron transport mechanism. Also the ratio of D254* to D546* was calculated above 8 × 102 for all PDs, which demonstrated that our PDs showed high selectivity for detecting UV light with less influence of light with long wavelength.

  13. Penetration through the Skin Barrier

    DEFF Research Database (Denmark)

    Nielsen, Jesper Bo; Benfeldt, Eva; Holmgaard, Rikke

    2016-01-01

    The skin is a strong and flexible organ with barrier properties essential for maintaining homeostasis and thereby human life. Characterizing this barrier is the ability to prevent some chemicals from crossing the barrier while allowing others, including medicinal products, to pass at varying rates......-through diffusion cells) as well as in vivo methods (microdialysis and microperfusion). Then follows a discussion with examples of how different characteristics of the skin (age, site and integrity) and of the penetrants (size, solubility, ionization, logPow and vehicles) affect the kinetics of percutaneous...

  14. A LOOK AT CULTURAL BARRIERS

    Directory of Open Access Journals (Sweden)

    Carmen A. VRÂNCEANU

    2015-06-01

    Full Text Available Nowadays the global market allows each individual to work in foreign countries. This fact is a great opportunity for business development, but also puts into light the problem of cultural barriers. Ineffective cross-cultural communication and collaboration can harm employees, customers, and other stakeholders. A company with employees from different cultures must acknowledge and understand these barriers in order to overcome them and to obtain the desired performance. The present study aims to expose the cultural barriers encountered by foreigners in a multinational company from Romania.

  15. Tungsten-titanium diffusion barriers for silver metallization

    Energy Technology Data Exchange (ETDEWEB)

    Bhagat, Shekhar [Department of Chemical and Materials Engineering, Arizona State University, Tempe, Arizona 85287-6006 (United States); Han, Hauk [Science and Engineering of Materials Program, Center for Solid State Science, Arizona State University, Tempe, Arizona 85287-1706 (United States); Alford, T.L. [Department of Chemical and Materials Engineering, Arizona State University, Tempe, Arizona 85287-6006 (United States)]. E-mail: alford@asu.edu

    2006-12-05

    Diffusion barrier properties and thermal stability of reactive sputtered W-Ti films between Ag and Si were studied using X-ray diffractometry, X-ray fluorescence spectrometry, Rutherford backscattering spectrometry, four point probe analysis, and field emission scanning electron microscopy. These films were annealed in vacuum at different temperatures for 1 h. Silver layers were found to be stable up to 600 deg. C; after which, Ag agglomerated at 700 deg. C. Rutherford backscattering analysis showed that interfacial reactions took place at temperatures higher than 400 deg. C. Four point probe resistivity measurements showed that the films were stable up to 600 deg. C. At 700 deg. C the resistivity increased abnormally. These results support further investigation of W-Ti films as a potential barrier layer for Ag metallization in the high temperature electronics.

  16. Improvement of barrier properties of rotomolded PE containers with nanoclay

    Energy Technology Data Exchange (ETDEWEB)

    Jamshidi, Shadi; Sundararaj, Uttandaraman, E-mail: u.sundararaj@ucalgary.ca [Department of Chemical and Petroleum Engineering, University of Calgary, Calgary, Alberta, T2N 1N4 (Canada)

    2015-05-22

    Polyethylene (PE) is widely used to make bulk containers in rotational molding process. The challenge in this study is to improve permeation resistance of PE to hydrocarbon solvents and gases. Adding organomodified clay improves the thermal, barrier and mechanical properties of PE. In fact, clay layers create a tortuous path against the permeant, yielding better barrier properties. Due to the non-polar hydrophobic nature of PE and polar hydrophilic structure of clay minerals, the compatibilizer plays a crucial role to enhance the dispersion level of clay in the matrix. In this study High Density Polyethylene (HDPE) and Linear Low Density Polyethylene (LLDPE) layered silicate nanocomposite were melt-compounded with two concentrations of organomodified clay (2 and 4 wt. %). The interaction between nanoclay, compatibilizer and rotomolding grade of PE were examined by using X-ray diffraction, transmission electron microscopy (TEM) and rheology test. Rheology was used to determine the performance of our material at low shear processing condition.

  17. Adapting wood hydrolysate barriers to high humidity conditions.

    Science.gov (United States)

    Yaich, Anas Ibn; Edlund, Ulrica; Albertsson, Ann-Christine

    2014-01-16

    The incorporation of layered silicates in bio-based barrier films resulted in lower water vapor permeability, and significantly lowered oxygen permeability at a relative humidity (RH) as high as 80%, with reduced moisture sensitivity of the wood hydrolysate (WH) based films. The applicability of WH based films was accordingly extended over a wider relative humidity condition range. Crude aqueous process liquor, the WH, was extracted from hardwood and utilized as a feed-stock for films without any upgrading pretreatment, yet producing superior oxygen barrier performance compared to partially upgraded WH and highly purified hemicelluloses. Films composed of crude WH and either one of two types of naturally occurring layered silicates, montmorillonite (MMT) or talc, as mineral additives, were evaluated with respect to oxygen and water vapor permeability, morphological, tensile and dynamic thermo-mechanical properties. Films with an oxygen permeability as low as 1.5 (cm(3)μm)/(m(2)daykPa) at 80% RH was achieved.

  18. Tanycyte-Like Cells Form a Blood–Cerebrospinal Fluid Barrier in the Circumventricular Organs of the Mouse Brain

    OpenAIRE

    2013-01-01

    Tanycytes are highly specialized ependymal cells that form a blood–cerebrospinal fluid (CSF) barrier at the level of the median eminence (ME), a circumventricular organ (CVO) located in the tuberal region of the hypothalamus. This ependymal layer harbors well-organized tight junctions, a hallmark of central nervous system barriers that is lacking in the fenestrated portal vessels of the ME. The displacement of barrier properties from the vascular to the ventricular side allows the diffusion o...

  19. Thermal barrier coatings for heat engine components

    Science.gov (United States)

    Levine, S. R.; Miller, R. A.; Hodge, P. E.

    1980-01-01

    A comprehensive NASA-Lewis program of coating development for aircraft gas turbine blades and vanes is presented. Improved ceramic layer compositions are investigated, along the MCrAlY bond films and the methods of uniform deposition of the coatings; the thermomechanical and fuel impurity tolerance limits of the coatings are being studied. Materials include the ZrO2-Y2O3/NiCrAlY system; the effects of the bond coat and zirconia composition on coating life and Mach 1 burner rig test results are discussed. It is concluded that Diesel engines can also utilize thermal barrier coatings; they have been used successfully on piston crowns and exhaust valves of shipboard engines to combat lower grade fuel combustion corrosion.

  20. EMBEDDED OPTICAL SENSORS FOR THERMAL BARRIER COATINGS

    Energy Technology Data Exchange (ETDEWEB)

    David R. Clarke

    2004-12-16

    In this first year of the program we have focused on the selection of rare-earth dopants for luminescent sensing in thermal barrier coating materials, the effect of dopant concentration on several of the luminescence characteristics and initial fabrication of one type of embedded sensor, the ''red-line'' sensor. We have initially focused on erbium as the lanthanide dopant for luminescence doping of yttria-stabilized zirconia and europium as the lanthanide for luminescence doping of gadolinium zirconate. The latter exhibits a temperature-dependent luminescence lifetime up to at least 1100 C. A buried layer, ''red-line'' sensor in an electron-beam deposited yttria-stabilized zirconia coating with erbium has been demonstrated and exhibits a temperature-dependent luminescence lifetime up to at least 400 C.

  1. Laser Remelting of Plasma Sprayed Thermal Barrier Coatings

    Institute of Scientific and Technical Information of China (English)

    Gang ZHANG; Yong LIANG; Yingna WU; Zhongchao FENG; Bingchun ZHANG; Fangjun LIU

    2001-01-01

    A CO2 continuous wave laser with defocused beam was used for remelting the surface of plasma sprayed ZrO2-8 wt pct Y2O3 (8YSZ)/Ni22Cr10AlY thermal barrier coatings (TBCs) on GH536 superalloy substrate. Two main laser processing parameters, power and travel speed, were adopted to produce a completely remelted layer, and their effects on remelted appearance,remelting depth, density and diameter of depression, space of segment crack and remelted microstructure were evaluated. With energy of 4.0 to 8.0 J.mm-2, an appropriate laser processing for applicable remelted layer was suggested.

  2. Low Conductivity Thermal Barrier Coatings

    Science.gov (United States)

    Zhu, Dong-Ming

    2005-01-01

    Thermal barrier coatings will be more aggressively designed to protect gas turbine engine hot-section components in order to meet future engine higher fuel efficiency and lower emission goals. In this presentation, thermal barrier coating development considerations and requirements will be discussed. An experimental approach is established to monitor in real time the thermal conductivity of the coating systems subjected to high-heat-flux, steady-state and cyclic temperature gradients. Advanced low conductivity thermal barrier coatings have also been developed using a multi-component defect clustering approach, and shown to have improved thermal stability. The durability and erosion resistance of low conductivity thermal barrier coatings have been improved utilizing advanced coating architecture design, composition optimization, in conjunction with more sophisticated modeling and design tools.

  3. Coastal Structures and Barriers 2012

    Data.gov (United States)

    California Department of Resources — This dataset is a compilation of the UCSC Sand Retention Structures, MC Barriers, and USACE Coastal Structures. UCSC Sand Retention Structures originate from a...

  4. Guided tissue regeneration. Absorbable barriers.

    Science.gov (United States)

    Wang, H L; MacNeil, R L

    1998-07-01

    Over the past 15 years, techniques aimed at regeneration of lost periodontal tissue have become widely used and accepted in clinical practice. Among these techniques are those which use the principles of guided tissue regeneration (GTR), wherein barriers (i.e., membranes) are used to control cell and tissue repopulation of the periodontal wound. A variety of non-absorbable and absorbable barriers have been developed and used for this purpose, with a trend in recent years toward increased use of absorbable GTR materials. This article describes the evolution of absorbable barrier materials and overview materials available for clinical use today. In addition, advantages and disadvantages of these materials are discussed, as well as possible new developments in barrier-based GTR therapy.

  5. Control of Transport-barrier relaxations by Resonant Magnetic Perturbations

    CERN Document Server

    Leconte, M; Garbet, X; Benkadda, S

    2009-01-01

    Transport-barrier relaxation oscillations in the presence of resonant magnetic perturbations are investigated using three-dimensional global fluid turbulence simulations from first principles at the edge of a tokamak. It is shown that resonant magnetic perturbations have a stabilizing effect on these relaxation oscillations and that this effect is due mainly to a modification of the pressure profile linked to the presence of both residual residual magnetic island chains and a stochastic layer.

  6. Impaired water barrier function in acne vulgaris.

    Science.gov (United States)

    Yamamoto, A; Takenouchi, K; Ito, M

    1995-01-01

    In acne vulgaris, abnormal follicular keratinization is important for comedo formation, yet the precise mechanisms of comedogenesis are not known. The present study examined the interrelationship between sebum secretion rate (SSR), lipid content and water barrier function (WBF) of the stratum corneum (SC) in 36 acne patients and 29 control subjects. All major SC lipid classes were separated and quantified by thin-layer chromatography/photodensitometry. WBF was evaluated by measuring transepidermal water loss (TEWL), and the hygroscopic properties and waterholding capacity of the SC. The SSR over a period of 3 h was significantly higher in patients with moderate acne than in control subjects, but no significant difference was noticed between patients with mild acne and control subjects. Significant differences between patients with both moderate and mild acne and control subjects were noted in the amount of sphingolipids (ceramides and free sphingosine), but not for any other lipid classes. Furthermore in acne patients, lower amounts of sphingolipids were observed corresponding with a diminished WBF. These results suggest that an impaired WBF caused by decreased amounts of ceramides may be responsible for comedo formation, since barrier dysfunction is accompanied by hyperkeratosis of the follicular epithelium.

  7. Intestinal barrier homeostasis in inflammatory bowel disease.

    Science.gov (United States)

    Goll, Rasmus; van Beelen Granlund, Atle

    2015-01-01

    The single-cell thick intestinal epithelial cell (IEC) lining with its protective layer of mucus is the primary barrier protecting the organism from the harsh environment of the intestinal lumen. Today it is clear that the balancing act necessary to maintain intestinal homeostasis is dependent on the coordinated action of all cell types of the IEC, and that there are no passive bystanders to gut immunity solely acting as absorptive or regenerative cells: Mucin and antimicrobial peptides on the epithelial surface are continually being replenished by goblet and Paneth's cells. Luminal antigens are being sensed by pattern recognition receptors on the enterocytes. The enteroendocrine cells sense the environment and coordinate the intestinal function by releasing neuropeptides acting both on IEC and inflammatory cells. All this while cells are continuously and rapidly being regenerated from a limited number of stem cells close to the intestinal crypt base. This review seeks to describe the cell types and structures of the intestinal epithelial barrier supporting intestinal homeostasis, and how disturbance in these systems might relate to inflammatory bowel disease.

  8. Graphene applications in Schottky barrier solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Lancellotti, L., E-mail: laura.lancellotti@enea.it [ENEA Research Centre Portici, Piazzale E. Fermi 1, 80055 Portici (Napoli) (Italy); Polichetti, T.; Ricciardella, F. [ENEA Research Centre Portici, Piazzale E. Fermi 1, 80055 Portici (Napoli) (Italy); Tari, O., E-mail: orlando.tari@unina.it [University of Naples ' Federico II' , Dept. of Electronic Engineering, Via Claudio 21, 80125 Napoli (Italy); Gnanapragasam, S. [ENEA Research Centre Portici, Piazzale E. Fermi 1, 80055 Portici (Napoli) (Italy); Daliento, S. [University of Naples ' Federico II' , Dept. of Electronic Engineering, Via Claudio 21, 80125 Napoli (Italy); Di Francia, G. [ENEA Research Centre Portici, Piazzale E. Fermi 1, 80055 Portici (Napoli) (Italy)

    2012-11-01

    We report a theoretical study about the performances of graphene on semiconductor Schottky barrier solar cells with the aim to show the potentiality of this kind of device. The simulations are carried by a generalized equivalent circuit model, where the circuital parameters are strictly dependent on the physical properties of the graphene and semiconductor which form the Schottky junction. We have realized graphene samples and characterized them by optical and atomic force microscopy, and Raman spectroscopy. Capacitance-voltage measurements have been made on some 'ad hoc' graphene based devices in order to obtain graphene workfunction, a very essential physical parameter. The estimated value is compatible with four layer graphene. This result is in agreement with the morphological characterizations of our material. - Highlights: Black-Right-Pointing-Pointer An equivalent circuit model simulates graphene based Schottky barrier solar cells. Black-Right-Pointing-Pointer Graphene flakes are identified through Raman spectroscopy and Atomic Force Microscopy. Black-Right-Pointing-Pointer Workfunction estimation by Capacitance-Voltage (C-V) on graphene based devices Black-Right-Pointing-Pointer A multilayered structure is evidenced by morphological and C-V characterization.

  9. Engineered Barrier Testing at the INEEL Engineered Barriers Test Facility: FY-1997 and FY-1999

    Energy Technology Data Exchange (ETDEWEB)

    Keck, K. N.; Porro, I.

    1998-09-01

    Engineered barriers of two designs are being tested at the Engineered Barriers Test Facility (EBTF) at the Idaho National Engineering and Environmental Laboratory. This report describes the test facility, barrier designs, and instruments used to monitor the test plots. Wetting tests conducted on the test plots in FY-97 are described and data collected from monitoring the test plots before, during and after the wetting tests are used to evaluate the performance of the covers during FY-97 and FY-98. Replicates of two engineered barrier designs were constructed in the EBTF cells. The first design comprises a thick, vegetated soil cover. The second design incorporates a capillary/biobarrier within the vegtated soil cover. The capillary barrier uses the textural break between an upper, fine textured soil and a lower, coarser-textured gravel layer to inhibit drainage under unsaturated conditions while increasing soil moisture storage in the root zone. Evaporation and transpiration by plants (although the test plots have not yet been vegetated) are used to recycle water stored in the soil back to the atmosphere. A geotextile fabric is used to maintain separation of the soil and gravel layers. A thick layer of cobbles beneath the gravel layer serves as a biobarrier to prevent intrusion of plant roots and burrowing animals into underlying waste (there is no waste in the test plots). Each test plot was instrumented with time domain reflectometry probes and neutron probe access tubes to measure moisture contents, tensiometers, heat dissipation sensors, and thermocouple psychrometers to measure matric potentials, thermocouples to measure soil temperature, and ion-exchange resin beads to monitor tracer movement. Each drainage sump is equipped with a tipping bucket instrument and pressure transducer to measure drainage. Precipitation is measured using a heated rain gauge located at the EBTF. Instrument calibration equation coefficients are presented, and data reduction

  10. Schooling Inequality and Language Barriers

    OpenAIRE

    Parker, Susan W.; Rubalcava, Luis; Teruel, Graciela

    2005-01-01

    This article estimates the impact of language barriers on school achievement and the potential ameliorating role of bilingual education. Using large household data sets from poor rural communities in Mexico, we find that parental language (failure to speak Spanish) represents an important barrier to the schooling of indigenous children. We provide an empirical test suggesting that this largely reflects parental human capital related to culture/language, rather than unobserved wealth effects. ...

  11. SUBSURFACE BARRIER VALIDATION WITH THE SEAFACE SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    Sandra Dalvit Dunn

    1997-11-30

    construction of the facility to assure there would be no undesired leaks, the primary barrier to diffusion (a 30-mil high density polyethylene membrane) failed. The unanticipated leaks were large enough that tracer gas diffusing from them masked the designed leaks. The test facility was re-excavated and a new membrane installed. Initial tests of this barrier showed that it also leaked near the bottom of the barrier. However, careful control of the subsequent tracer gas injections, coupled with extensive data analysis to minimize the effects of the high background tracer gas concentrations, allowed leak characterization to be completed successfully. The proposed Phase II demonstration for this project is a double wall, jet grouted coffer dam at the Dover Air Force Base Groundwater Remediation Field Laboratory. This barrier will be constructed of multiple thin wall panels (nominally 6 to 10-inch thick) installed to form a vertical right circular cylinder, approximately 30 ft. in diameter. The barrier will be keyed into a clay layer at the 45 ft. depth, forming the bottom of the barrier.

  12. Economic alternatives for containment barriers

    Energy Technology Data Exchange (ETDEWEB)

    Nicholson, P.J.; Jasperse, B.H.; Fisher, M.J. [Geo-Con, Inc., Monroeville, PA (United States)

    1997-12-31

    Fixation, barriers, and containment of existing landfills and other disposal areas are often performed by insitu auger type soil mixing and jet grouting. Cement or other chemical reagents are mixed with soil to form both vertical and horizontal barriers. Immobilization of contaminants can be economically achieved by mixing soil and the contaminants with reagents that solidify or stabilize the contaminated area. Developed in Japan, and relatively new to the United States, the first large scale application was for a vertical barrier at the Jackson Lake Dam project in 1986. This technology has grown in both the civil and environmental field since. The paper describes current United States practice for Deep Soil Mixing (over 12 meters in depth), and Shallow Soil Mixing for vertical barriers and stabilization/solidification, and Jet Grouting for horizontal and vertical barriers. Creating very low permeability barriers at depth with minimal surface return often makes these techniques economical when compared to slurry trenches. The paper will discuss equipment, materials, soil and strength parameters, and quality control.

  13. Roll-to-roll vacuum deposition of barrier coatings

    CERN Document Server

    Bishop, Charles A

    2015-01-01

    It is intended that the book will be a practical guide to provide any reader with the basic information to help them understand what is necessary in order to produce a good barrier coated web or to improve the quality of any existing barrier product. After providing an introduction, where the terminology is outlined and some of the science is given (keeping the mathematics to a minimum), including barrier testing methods, the vacuum deposition process will be described. In theory a thin layer of metal or glass-like material should be enough to convert any polymer film into a perfect barrier material. The reality is that all barrier coatings have their performance limited by the defects in the coating. This book looks at the whole process from the source materials through to the post deposition handling of the coated material. This holistic view of the vacuum coating process provides a description of the common sources of defects and includes the possible methods of limiting the defects. This enables readers...

  14. Role of the intestinal barrier in inflammatory bowel disease

    Institute of Scientific and Technical Information of China (English)

    Mike G Laukoetter; Porfirio Nava; Asma Nusrat

    2008-01-01

    A critical function of the intestinal mucosa is to form a barrier that separates luminal contents from the interstitium. The single layer of intestinal epithelial cells (IECs) serves as a dynamic interface between the host and its environment. Cell polarity and structural properties of the epithelium is complex and is important in the development of epithelial barrier function. Epithelial cells associate with each other via a series of intercellular junctions. The apical most intercellular junctional complex referred to as the Apical Junction Complex (AJC) is important in not only cell-cell recognition, but also in the regulation of paracellular movement of fluid and solutes. Defects in the intestinal epithelial barrier function have been observed in a number of intestinal disorders such as inflammatory bowel disease (IBD). It is now becoming evident that an aberrant epithelial barrier function plays a central role in the pathophysiology of IBD. Thus, a better understanding of the intestinal epithelial barrier structure and function in healthy and disease states such as IBD will foster new ideas for the development of therapies for such chronic disorders.

  15. Acoustic impact on the laminated plates placed between barriers

    Science.gov (United States)

    Paimushin, V. N.; Gazizullin, R. K.; Fedotenkov, G. V.

    2016-11-01

    On the basis of previously derived equations, analytical solutions are established on the forced vibrations of two-layer and three-layers rectangular plates hinged in an opening of absolutely rigid walls during the transmission of monoharmonic sound waves. It is assumed that the partition wall is situated between two absolutely rigid barriers, one of them by harmonic oscillation with a given displacements amplitude on the plate forms the incident sound wave, and the other is stationary and has a coating of deformable energy absorbing material with high damping properties. The behavior of acoustic environments in the spaces between the deformable plate and the barriers described by classical wave equation based on the ideal compressible fluid model. To describe the process of dynamic deformation of the energy absorbing coating of fixed barrier, two-dimensional equations of motion based on the use of models transversely soft layer are derived with a linear approximation of the displacement field in the thickness direction of the coating and taking into account the damping properties of the material and the hysteresis model for it. The influence of the physical and mechanical properties of the concerned mechanical system and the frequency of the incident sound wave on the parameters of its insulation properties of the plate, as well as on the parameters of the stress-strain state of the plate has been analyzed.

  16. Strain induced ionic conductivity enhancement in epitaxial Ce0.9Gd0.1O22d

    DEFF Research Database (Denmark)

    Kant, K. Mohan; Esposito, Vincenzo; Pryds, Nini

    2012-01-01

    Strained epitaxial Ce0.9Gd0.1O2d (CGO) thin films are deposited on MgO(001) substrates with SrTiO3 (STO) buffer layers. The strain in CGO epitaxial thin films is induced and controlled by varying the thickness of STO buffer layers. The induced strain is found to significantly enhance the in...

  17. Synthesizing High-Quality Graphene Membranes for Engineering Diffusion Barriers

    Science.gov (United States)

    Singha Roy, Susmit

    We demonstrate significant advances in the fundamental understanding and engineering of scalable graphene diffusion barriers. Experimental studies have established that defect-free non-scalable graphene is an excellent barrier material, however its scalable counterparts are still well behind in terms of performance. The latter's ability to perform as a barrier membrane is compromised primarily by the presence of three major problems - high density of defects, self-degradation in ambient environment and induced electrochemical oxidation of the underlying material. First, we develop an in-depth understanding of how diffusion occurs through monolayer graphene grown via chemical vapor deposition. It is shown that the atomic membrane is impenetrable in the pristine regions, however it is easily penetrated by oxygen and water at grain boundaries and intrinsic pinholes. Second, we study in detail the self-deterioration of graphene in ambient and quantify the evolution, kinetics, and energetics of the degradation process both in the pristine and intrinsically defective regions of graphene. It is also found that the degradation process is accelerated in the presence of water vapor. Third, we find that the overall defect density of a graphene membrane is primarily determined by the density of its intrinsic pinholes and grain boundaries. We demonstrate that the density on intrinsic pinholes can be significantly reduced by reducing the surface roughness of the growth substrate which is achieved by regulating the pre-growth annealing time and temperature. The density of the grain boundaries can be altered by varying the internucleation distance during the growth of the membrane. Fourth, when graphene is used as a corrosion barrier for metals, we establish that the electrochemical corrosion of the metal can be drastically reduced by adding an ultra-thin electrically insulating layer between the graphene and the metal. In addition, the barrier performance is enhanced greatly by

  18. Asymmetric voltage behavior of the tunnel magnetoresistance in double barrier magnetic tunnel junctions

    KAUST Repository

    Useinov, Arthur

    2012-06-01

    In this paper, we study the value of the tunnel magnetoresistance (TMR) as a function of the applied voltage in double barrier magnetic tunnel junctions (DMTJs) with the left and right ferromagnetic (FM) layers being pinned and numerically estimate the possible difference of the TMR curves for negative and positive voltages in the homojunctions (equal barriers and electrodes). DMTJs are modeled as two single barrier junctions connected in series with consecutive tunneling (CST). We investigated the asymmetric voltage behavior of the TMR for the CST in the range of a general theoretical model. Significant asymmetries of the experimental curves, which arise due to different annealing regimes, are mostly explained by different heights of the tunnel barriers and asymmetries of spin polarizations in magnetic layers. © (2012) Trans Tech Publications.

  19. Gas permeability of bentonite barriers: development, construction and testing of a measurement system

    Directory of Open Access Journals (Sweden)

    Heraldo Nunes Pitanga

    Full Text Available Abstract This article proposes a testing device to quickly and reliably estimate the gas permeability of bentonite-based clay barriers used in landfill cover systems. The testing methodology is based on a transient gas flow regime that passes through the barrier, therefore not requiring the use of sophisticated equipment that aim to maintain constant differential pressure and measure the gas flow, common requirements for testing methods under a permanent flow regime. To confirm the feasibility of the proposed technique, tests were performed on a pure hydrated bentonite layer, which subsequently encompassed samples of geosynthetic clay liner (GCL at different moisture contents. Geosynthetic clay liners are often selected as a part of the barrier layer for cover systems in solid waste landfills to prevent infiltration of rainfall and migration of biogas into the atmosphere. The results confirmed the equipment reliability and differentiate the different responses of the gas flow barriers studied, considering their different compositions and different moistures.

  20. Cultuur- en Gebruikswaardenonderzoek (CGO) appel en peer 1e fase

    NARCIS (Netherlands)

    Heijerman, G.; Dieren, van M.C.A.; Kemp, H.

    2006-01-01

    Verzamelen van nieuwe rassen appel en peer en eerste screening op geschiktheid omstandigheden Nederland. Nieuwe appel- en perenrassen zijn nodig voor aansluiting bij de veranderende marktvraag en voor innovatie in de sector. Een toenemend aandeel van de collectie zijn resistente rassen, inmiddels zi

  1. Rheology of stabilized cerium-gadolinium oxide (CGO) colloidal system

    DEFF Research Database (Denmark)

    Marani, Debora; Hjelm, Johan; Wandel, Marie

    performed to study the inorganic loading impact on the suspension rheology. To identify a realistic load limit, the parameter h was proposed. It defines the highest volume fraction to meet the processing requirements. A simple method for its determination was also proposed. The maximum solid volume...

  2. Diabetes and diet: Managing dietary barriers.

    NARCIS (Netherlands)

    Friele, R.D.

    1989-01-01

    This thesis reports on the barriers diabetic patients experience with their diet, and the ways they cope with these barriers. A dietary barrier is a hinderance to a person's well-being, induced by being advised a diet. First inventories were made of possible dietary barriers and ways of coping with

  3. Spray Layer-by-Layer Assembled Clay Composite Thin Films as Selective Layers in Reverse Osmosis Membranes.

    Science.gov (United States)

    Kovacs, Jason R; Liu, Chaoyang; Hammond, Paula T

    2015-06-24

    Spray layer-by-layer assembled thin films containing laponite (LAP) clay exhibit effective salt barrier and water permeability properties when applied as selective layers in reverse osmosis (RO) membranes. Negatively charged LAP platelets were layered with poly(diallyldimethylammonium) (PDAC), poly(allylamine) (PAH), and poly(acrylic acid) (PAA) in bilayer and tetralayer film architectures to generate uniform films on the order of 100 nm thick that bridge a porous poly(ether sulfone) support to form novel RO membranes. Nanostructures were formed of clay layers intercalated in a polymeric matrix that introduced size-exclusion transport mechanisms into the selective layer. Thermal cross-linking of the polymeric matrix was used to increase the mechanical stability of the films and improve salt rejection by constraining swelling during operation. Maximum salt rejection of 89% was observed for the tetralayer film architecture, with an order of magnitude increase in water permeability compared to commercially available TFC-HR membranes. These clay composite thin films could serve as a high-flux alternative to current polymeric RO membranes for wastewater and brackish water treatment as well as potentially for forward osmosis applications. In general, we illustrate that by investigating the composite systems accessed using alternating layer-by-layer assembly in conjunction with complementary covalent cross-linking, it is possible to design thin film membranes with tunable transport properties for water purification applications.

  4. A Possible Mechanism for Overcoming the Electrostatic Barrier Against Dust Growth in Protoplanetary disks

    OpenAIRE

    2015-01-01

    The coagulation of dust particles under the conditions in protoplanetary disks is investigated. The study focuses on the repulsive electrostatic barrier against growth of charged dust grains. Taking into account the photoelectric effect leads to the appearance of a layer at intermediate heights where the dust has a close to zero charge, enabling the dust grains to grow efficiently. An increase in the coagulation rate comes about not only due to the lowering of the Coulomb barrier, but also be...

  5. Investigation of endothelial growth using a sensors-integrated microfluidic system to simulate physiological barriers

    Directory of Open Access Journals (Sweden)

    Rajabi Taleieh

    2015-09-01

    Full Text Available In this paper we present a microfluidic system based on transparent biocompatible polymers with a porous membrane as substrate for various cell types which allows the simulation of various physiological barriers under continuous laminar flow conditions at distinct tunable shear rates. Besides live cell and fluorescence microscopy, integrated electrodes enable the investigation of the permeability and barrier function of the cell layer as well as their interaction with external manipulations using the Electric Cell-substrate Impedance Sensing (ECIS method.

  6. Diode lasers with asymmetric barriers for 850 nm spectral range: experimental studies of power characteristics

    OpenAIRE

    Zubov, F. I.; Zhukov, A. E.; Shernyakov, Yu. M.; M. V. Maximov; Semenova, Elizaveta; Asryan, L. V.

    2015-01-01

    It is demonstrated that the use of asymmetric barrier layers in a waveguide of a diode laser suppress non-linearity of light-current characteristic and thus improve its power characteristics under high current injection. The results are presented for 850-nm AlGaAs/GaAs broad-area lasers with GaInP and AlInGaAs asymmetric barriers.

  7. Cylindrical air flow reversal barrier

    Energy Technology Data Exchange (ETDEWEB)

    Woznica, C.; Rodziewicz, M.

    1988-06-01

    Describes an innovative design introduced in the ZMP mine in Zory for quick reversal of ventilation air flow. Geologic mining conditions at the 705 m deep horizon, where the barrier was built, are described. According to the design used until now, a reversal system consisted of safety barriers, ventilation air locks, a ventilation bridge and stopping needed in case of a fire when air flow direction must be reversed. Nine air locks and an expensive concrete ventilation bridge were needed and the air locks had to be operated at 8 points of the region to effect reversal. The new design consists of a 2-storey cylindrical barrier which also fulfills the function of a ventilation bridge. It can be manually or remotely operated by a mechanical or pneumatic system. Tests showed that the new barrier permits immediate air flow reversal while retaining 60% of the original air, which is important in the case of fire and methane hazards. It permits improved seam panelling and splitting of pillars and brings an economy of about 40 million zlotys in construction cost. Design and operation of the barrier is illustrated and ventilation air circulation is explained. 7 figs.

  8. Hanford Permanent Isolation Barrier Program: Asphalt technology data and status report - FY 1994

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, H.D.; Romine, R.A.; Zacher, A.H.

    1994-09-01

    The asphalt layer within the Hanford Permanent Isolation Barrier (HPIB) is an important component of the overall design. This layer provides a RCRA equivalent backup to the overlying earthen layers in the unlikely event that these layers are not able to reduce the infiltration rate to less than 0.05 cm/yr. There is only limited amount of information on using asphalt for a moisture infiltration barrier over the long times required by the HPIB. Therefore, a number of activities are under way, as part of the Barrier Development Program, to obtain data on the performance of asphalt as a moisture barrier in a buried environment over a 1000-year period. These activities include (1) determining RCRA equivalency, (2) measurement of physical properties, (3) measurement of aging characteristics, and (4) relationship to ancient asphalt analogs. During FY 1994 progress was made on all of these activities. Studies were conducted both in the laboratory and on the prototype barrier constructed over the 216-B-57 crib in the 200 East Area on the Hanford Site. This report presents results obtained from the asphalt technology tasks during FY 1994. Also included are updates to planned activities for asphalt analogs and monitoring the asphalt test pad near the prototype barrier. Measurements of hydraulic conductivity on the HMAC portion of the prototype barrier show that the asphalt layers easily meet the RCRA standard of 1 {times} 10{sup -7} cm/s. In-place measurements using a new field falling head technique show an average of 3.66 {times} 10{sup -8} cm/s, while cores taken from the north end of the prototype and measured in a laboratory setup averaged 1.29 {times} 10{sup -9} cm/s. Measurements made on the fluid applied asphalt membrane (polymer-modified asphalt) show an extremely low permeability of less than 1 {times} 10{sup -11} cm/s.

  9. Testing and monitoring plan for the permanent isolation surface barrier prototype

    Energy Technology Data Exchange (ETDEWEB)

    Gee, G.W.; Cadwell, L.L.; Freeman, H.D.; Ligotke, M.W.; Link, S.O.; Romine, R.A.; Walters, W.H. Jr.

    1993-06-01

    This document is a testing and monitoring plan for a prototype barrier to be constructed at the Hanford Site in 1993. The prototype barrier is an aboveground structure engineered to demonstrate the basic features of an earthen cover system, designed to permanently isolate waste from the biosphere. These features include multiple layers of soil and rock materials and a low-permeability asphalt sublayer. The surface of the barrier consists of silt loam soil, vegetated with plants. The barrier sides are reinforced with rock or coarse earthen-fill to protect against wind and water erosion. The sublayers inhibit plant and animal intrusion and percolation of water. A series of tests will be conducted on the prototype over the next several years to evaluate barrier performance under extreme climatic conditions.

  10. Gas Barrier and Separation Behavior of Graphene Oxide Nanobrick Wall Thin Films

    Science.gov (United States)

    Grunlan, Jaime

    2015-03-01

    In many cases, electronics packaging requires electrical conductivity and barrier to oxygen, even under humid conditions. These two properties have simultaneously been realized through the use of surfactant-free aqueous layer-by-layer (LbL) processing, in the form of a polymer composite nanocoating. By layering graphene oxide (GO) with polyethyleneimine (PEI), a ``nano brick wall'' structure has been created, imparting gas barrier properties to the film. Reducing the graphene oxide with a thermal treatment further produces high oxygen barrier in humid conditions and imparts high electrical conductivity (σ ~ 1750 S/m). These thin films (300), making them interesting for gas purification membranes. The flexible nature of the aforementioned thin films, along with their excellent combination of transport properties, make them ideal candidates for use in a broad range of electronics and other packaging applications.

  11. Structure information from fusion barriers

    Indian Academy of Sciences (India)

    S V S Sastry; S Santra

    2000-06-01

    It is shown that the analysis of fusion barrier distributions is not always an unambiguous test or a ‘fingerprint’ of the structure information of the colliding nuclei. Examples are presented with same fusion barrier distributions for nuclei having different structures. The fusion excitation functions for 16O+208Pb, using the coupled reaction channel (CRC) method and correct structure information, have been analysed. The barrier distributions derived from these excitation functions including many of the significant channels are featureless, although these channels have considerable effects on the fusion excitation function. However, a simultaneous analysis of the fusion, elastic and quasi-elastic channels would fix the structure and the reaction unambiguously

  12. Skin Barrier Function and Allergens

    DEFF Research Database (Denmark)

    Engebretsen, Kristiane Aasen; Thyssen, Jacob Pontoppidan

    2016-01-01

    The skin is an important barrier protecting us from mechanical insults, microorganisms, chemicals and allergens, but, importantly, also reducing water loss. A common hallmark for many dermatoses is a compromised skin barrier function, and one could suspect an elevated risk of contact sensitization...... and skin barrier status. Psoriasis has traditionally been regarded a Th1-dominated disease, but the discovery of Th17 cells and IL-17 provides new and interesting information regarding the pathogenesis of the disease. Research suggests an inverse relationship between psoriasis and CA, possibly due......) and Th2 (AD) have been proposed as an explanation. Finally, there is convincing evidence that exposure to irritants increases the risk of CS, and patients with ICD are, therefore, at great risk of developing CA. Skin irritation leads to the release of IL-1 and TNF-α, which affects the function of antigen...

  13. Influence of a BGaN back-barrier on DC and dynamic performances of an AlGaN/GaN HEMT: simulation study

    Science.gov (United States)

    Guenineche, Lotfi; Hamdoune, Abdelkader

    2016-05-01

    In this paper, we study the effect of a BGaN back-barrier on the DC and RF performances of an AlGaN/GaN high electron mobility transistor. Using TCAD Silvaco, we examine some variations of thickness and boron concentration in the BGaN back-barrier layer. First, we fix the thickness of the back-barrier layer at 5 nm and we vary the concentration of the boron in BGaN from 1% to 4%. Second, we fix the concentration of the boron in BGaN to only 2% and we vary the thickness of the back-barrier layer from 20 nm to 110 nm. The BGaN back-barrier layer creates an electrostatic barrier under the channel layer and improves the performances of the device by improving the electron confinement in the two-dimensional electron gas. The DC and AC characteristics are improved, respectively, by a greater concentration of boron and by a thicker BGaN layer. For 4% boron concentration and 5 nm thick back-barrier layer, we obtain a maximum drain current of 1.1 A, a maximum transconductance of 480 mS mm-1, a cut-off frequency of 119 GHz, and a maximum oscillation frequency of 311 GHz.

  14. Sound propagation over curved barriers

    Science.gov (United States)

    Pierce, Allan D.; Main, Geoffrey L.; Kearns, James A.; Hsieh, H.-A.

    1986-01-01

    Wide barriers with curved tops are studied with emphasis placed on circumstances whereby the local radius of curvature R of the barrier is continuous along the surface and is large compared to a wavelength. Results analogous to those given by Hayek et al. (1978) are reviewed and extended to cases where the radius of curvature and the surface impedance may vary with position. Circumstances not easily interpreted within the framework of the model proposed by Keller (1956) and Hayek et al. are also considered.

  15. Properties of Whey-Protein-Coated Films and Laminates as Novel Recyclable Food Packaging Materials with Excellent Barrier Properties

    Directory of Open Access Journals (Sweden)

    Markus Schmid

    2012-01-01

    Full Text Available In case of food packaging applications, high oxygen and water vapour barriers are the prerequisite conditions for preserving the quality of the products throughout their whole lifecycle. Currently available polymers and/or biopolymer films are mostly used in combination with barrier materials derived from oil based plastics or aluminium to enhance their low barrier properties. In order to replace these non-renewable materials, current research efforts are focused on the development of sustainable coatings, while maintaining the functional properties of the resulting packaging materials. This article provides an introduction to food packaging requirements, highlights prior art on the use of whey-based coatings for their barriers properties, and describes the key properties of an innovative packaging multilayer material that includes a whey-based layer. The developed whey protein formulations had excellent barrier properties almost comparable to the ethylene vinyl alcohol copolymers (EVOH barrier layer conventionally used in food packaging composites, with an oxygen barrier (OTR of <2 [cm³(STP/(m²d bar] when normalized to a thickness of 100 μm. Further requirements of the barrier layer are good adhesion to the substrate and sufficient flexibility to withstand mechanical load while preventing delamination and/or brittle fracture. Whey-protein-based coatings have successfully met these functional and mechanical requirements.

  16. Systems study on engineered barriers: barrier performance analysis

    Energy Technology Data Exchange (ETDEWEB)

    Stula, R.T.; Albert, T.E.; Kirstein, B.E.; Lester, D.H.

    1980-09-01

    A performance assessment model for multiple barrier packages containing unreprocessed spent fuel has been modified and applied to several package designs. The objective of the study was to develop information to be used in programmatic decision making concerning engineered barrier package design and development. The assessment model, BARIER, was developed in previous tasks of the System Study on Engineered Barriers (SSEB). The new version discussed in this report contains a refined and expanded corrosion rate data base which includes pitting, crack growth, and graphitization as well as bulk corrosion. Corrosion rates for oxic and anoxic conditions at each of the two temperature ranges are supplied. Other improvements include a rigorous treatment of radionuclide release after package failure which includes resistance of damaged barriers and backfill, refined temperature calculations that account for convection and radiation, a subroutine to calculate nuclear gamma radiation field at each barrier surface, refined stress calculations with reduced conservatism and various coding improvements to improve running time and core usage. This report also contains discussion of alternative scenarios to the assumed flooded repository as well as the impact of water exclusion backfills. The model was used to assess post repository closure performance for several designs which were all variation of basic designs from the Spent Unreprocessed Fuel (SURF) program. Many designs were found to delay the onset of leaching by at least a few hundreds of years in all geologic media. Long delay times for radionuclide release were found for packages with a few inches of sorption backfill. Release of uranium, plutonium, and americium was assessed.

  17. Electron tunneling through ultrathin boron nitride crystalline barriers.

    Science.gov (United States)

    Britnell, Liam; Gorbachev, Roman V; Jalil, Rashid; Belle, Branson D; Schedin, Fred; Katsnelson, Mikhail I; Eaves, Laurence; Morozov, Sergey V; Mayorov, Alexander S; Peres, Nuno M R; Neto, Antonio H Castro; Leist, Jon; Geim, Andre K; Ponomarenko, Leonid A; Novoselov, Kostya S

    2012-03-14

    We investigate the electronic properties of ultrathin hexagonal boron nitride (h-BN) crystalline layers with different conducting materials (graphite, graphene, and gold) on either side of the barrier layer. The tunnel current depends exponentially on the number of h-BN atomic layers, down to a monolayer thickness. Conductive atomic force microscopy scans across h-BN terraces of different thickness reveal a high level of uniformity in the tunnel current. Our results demonstrate that atomically thin h-BN acts as a defect-free dielectric with a high breakdown field. It offers great potential for applications in tunnel devices and in field-effect transistors with a high carrier density in the conducting channel.

  18. Mechanical Properties and Durability of Advanced Environmental Barrier Coatings in Calcium-Magnesium-Alumino-Silicate Environments

    Science.gov (United States)

    Miladinovich, Daniel S.; Zhu, Dongming

    2011-01-01

    Environmental barrier coatings are being developed and tested for use with SiC/SiC ceramic matrix composite (CMC) gas turbine engine components. Several oxide and silicate based compositons are being studied for use as top-coat and intermediate layers in a three or more layer environmental barrier coating system. Specifically, the room temperature Vickers-indentation-fracture-toughness testing and high-temperature stability reaction studies with Calcium Magnesium Alumino-Silicate (CMAS or "sand") are being conducted using advanced testing techniques such as high pressure burner rig tests as well as high heat flux laser tests.

  19. Reducing Water Vapor Permeability of Poly(lactic acid Film and Bottle through Layer-by-Layer Deposition of Green-Processed Cellulose Nanocrystals and Chitosan

    Directory of Open Access Journals (Sweden)

    Katalin Halász

    2015-01-01

    Full Text Available Layer-by-layer electrostatic self-assembly technique was applied to improve the barrier properties of poly(lactic acid (PLA films and bottles. The LbL process was carried out by the alternate adsorption of chitosan (CH (polycation and cellulose nanocrystals (CNC produced via ultrasonic treatment. Four bilayers (on each side of chitosan and cellulose nanocrystals caused 29 and 26% improvement in barrier properties in case of films and bottles, respectively. According to the results the LbL process with CH and CNC offered a transparent “green” barrier coating on PLA substrates.

  20. Three-dimensional patterns in dielectric barrier discharge with "H" shaped gas gap

    Science.gov (United States)

    Gao, Xing; Dong, Lifang; Wang, Hao; Zhang, Hao; Liu, Ying; Liu, Weibo; Fan, Weili; Pan, Yuyang

    2016-08-01

    Three-dimensional (3D) patterns are obtained for the first time in dielectric barrier discharge by a special designed device with "H" shaped gas gap which consists of a single gas layer gap and two double gas layer gaps. Three dimensional spatiotemporal characteristics of discharge are investigated by photomultiplier and intensified charge-coupled device camera. Results show that the discharge first generates in the single gas layer gap and the coupled filaments in the double gas layer gap present the simultaneity characteristics. The formation of 3D patterns is determined by the distribution of the effective field of the applied field and the wall charge field.

  1. THE EFFECT OF LASER GLAZING PROCESS ON MICROSTRUCTURE OF PLASMA SPRAYED THERMAL BARRIER COATINGS

    Directory of Open Access Journals (Sweden)

    Seyid Fehmi DİLTEMİZ

    2011-12-01

    Full Text Available Thermal barrier coatings (TBCs are widely used by aero and land based gas turbines to protect hot section parts from oxidation and reducing component temperature thereby increase life. TBCs aregenerally a combination of multiple layers of coating (usually two with each layer having a specific function [Aktaa et al., 2005]. In this study air plasma sprayed TBCs were deposited on 304 stainlesssteel substrates then ceramic surfaces were glazed using Nd-YAG laser. Both glazed and as-coated samples were subjected to metallographic examination to investigate microstructural changes inglazed ceramic layer. Laser glazing provides a remelting and subsequent solidification of the surface, resulting on new top layer microstructure.

  2. Multicomponent, Rare-Earth-Doped Thermal-Barrier Coatings

    Science.gov (United States)

    Miller, Robert A.; Zhu, Dongming

    2005-01-01

    Multicomponent, rare-earth-doped, perovskite-type thermal-barrier coating materials have been developed in an effort to obtain lower thermal conductivity, greater phase stability, and greater high-temperature capability, relative to those of the prior thermal-barrier coating material of choice, which is yttria-partially stabilized zirconia. As used here, "thermal-barrier coatings" (TBCs) denotes thin ceramic layers used to insulate air-cooled metallic components of heat engines (e.g., gas turbines) from hot gases. These layers are generally fabricated by plasma spraying or physical vapor deposition of the TBC materials onto the metal components. A TBC as deposited has some porosity, which is desirable in that it reduces the thermal conductivity below the intrinsic thermal conductivity of the fully dense form of the material. Undesirably, the thermal conductivity gradually increases because the porosity gradually decreases as a consequence of sintering during high-temperature service. Because of these and other considerations such as phase transformations, the maximum allowable service temperature for yttria-partially stabilized zirconia TBCs lies in the range of about 1,200 to 1,300 C. In contrast, the present multicomponent, rare-earth-doped, perovskite-type TBCs can withstand higher temperatures.

  3. Functional barriers: Properties and evaluation

    NARCIS (Netherlands)

    Feigenbaum, A.; Dole, P.; Aucejo, S.; Dainelli, D.; Cruz Garcia, C. de la; Hankemeier, T.; N'Gono, Y.; Papaspyrides, C.D.; Paseiro, P.; Pastorelli, S.; Pavlidou, S.; Pennarun, P.Y.; Saillard, P.; Vidal, L.; Vitrac, O.; Voulzatis, Y.

    2005-01-01

    Functional barriers are multilayer structures deemed to prevent migration of some chemicals released by food-contact materials into food. In the area of plastics packaging, different migration behaviours of mono- and multilayer structures are assessed in terms of lag time and of their influence of t

  4. Barrier/Cu contact resistivity

    Energy Technology Data Exchange (ETDEWEB)

    Reid, J.S.; Nicolet, M.A. [California Inst. of Tech., Pasadena, CA (United States); Angyal, M.S.; Lilienfeld, D.; Shacham-Diamand, Y. [Cornell Univ., Ithaca, NY (United States); Smith, P.M. [Sandia National Labs., Albuquerque, NM (United States)

    1995-10-17

    The specific contact resistivity of Cu with ({alpha} + {beta})-Ta, TiN, {alpha}-W, and amorphous-Ta{sub 36}Si{sub 14}N{sub 50} barrier films is measured using a novel four-point-probe approach. Geometrically, the test structures consist of colinear sets of W-plugs to act as current and voltage probes that contact the bottom of a planar Cu/barrier/Cu stack. Underlying Al interconnects link the plugs to the current source and voltmeter. The center-to-center distance of the probes ranges from 3 to 200 {micro}m. Using a relation developed by Vu et al., a contact resistivity of roughly 7 {times} 10{sup {minus}9} {Omega} cm{sup 2} is obtained for all tested barrier/Cu combinations. By reflective-mode small-angle X-ray scattering, the similarity in contact resistivity among the barrier films may be related to interfacial impurities absorbed from the deposition process.

  5. FX barriers with smile dynamics

    NARCIS (Netherlands)

    Baker, Glyn; Beneder, Reimer; Zilber, Alex

    2004-01-01

    Our mandate in this work has been to isolate the features of smile consistent models that are most relevant to the pricing of barrier options. We consider the two classical approaches of stochastic and (parametric) local volatility. Although neither has been particularly successful in practice their

  6. Synthesis of tantalum nitride diffusion barriers for Cu metal by plasma immersion ion implantation

    CERN Document Server

    Kumar, M; Kumar, D; George, P J; Paul, A K

    2002-01-01

    A Tantalum nitride diffusion barrier layer for copper metal was synthesized by Plasma Immersion Ion Implantation technique (PIII). Effect of nitrogen dose in Ta layer was investigated in improving its diffusion barrier properties. Silicon wafers coated with Ta were implanted with nitrogen at two different doses viz. 10$^{15}$ions/cm$^2$ and 10$^{17}$ions/cm$^2$ corresponding to low and high dose regime. High dose of implanted nitrogen ions in the film render it to become Ta(N), Thereafter a copper (Cu) layer was deposited on the samples to produce Cu/Ta(N)/Si structure. To evaluate the barrier properties of Ta(N) these samples were annealed up to 700$^\\circ$C for 30 minutes. Sheet resistance, X-Ray Diffraction (XRD) and Scanning Electron Microscope (SEM) measurements were carried out to investigate the effect of annealing. Low dose implanted Ta layer does not show any change in its diffusion barrier properties, while high dose implanted layer stops the diffusion of Cu metal through it at annealing temperature...

  7. Innovation in Layer-by-Layer Assembly.

    Science.gov (United States)

    Richardson, Joseph J; Cui, Jiwei; Björnmalm, Mattias; Braunger, Julia A; Ejima, Hirotaka; Caruso, Frank

    2016-12-14

    Methods for depositing thin films are important in generating functional materials for diverse applications in a wide variety of fields. Over the last half-century, the layer-by-layer assembly of nanoscale films has received intense and growing interest. This has been fueled by innovation in the available materials and assembly technologies, as well as the film-characterization techniques. In this Review, we explore, discuss, and detail innovation in layer-by-layer assembly in terms of past and present developments, and we highlight how these might guide future advances. A particular focus is on conventional and early developments that have only recently regained interest in the layer-by-layer assembly field. We then review unconventional assemblies and approaches that have been gaining popularity, which include inorganic/organic hybrid materials, cells and tissues, and the use of stereocomplexation, patterning, and dip-pen lithography, to name a few. A relatively recent development is the use of layer-by-layer assembly materials and techniques to assemble films in a single continuous step. We name this "quasi"-layer-by-layer assembly and discuss the impacts and innovations surrounding this approach. Finally, the application of characterization methods to monitor and evaluate layer-by-layer assembly is discussed, as innovation in this area is often overlooked but is essential for development of the field. While we intend for this Review to be easily accessible and act as a guide to researchers new to layer-by-layer assembly, we also believe it will provide insight to current researchers in the field and help guide future developments and innovation.

  8. Using hot wire and initiated chemical vapor deposition for gas barrier thin film encapsulation

    Energy Technology Data Exchange (ETDEWEB)

    Spee, D.A., E-mail: diederickspee@gmail.com; Rath, J.K.; Schropp, R.E.I.

    2015-01-30

    Hot wire CVD (HWCVD) and initiated CVD (iCVD) are very well suited deposition techniques for the fabrication of transparent thin film gas barriers. Single inorganic or organic layers, however, face challenges, which are hard to overcome: unavoidable defects and low intrinsic barrier function. We demonstrate that by combining inorganic HWCVD films and organic iCVD films, a water vapor transmission rate a low as 5 ∗ 10{sup −6} g/m{sup 2}/day at 60 °C and 90% RH for a simple pinhole free three layer structure is obtained even with non-optimized individual layers. Given the 100 °C deposition temperature, the layer stacks can be deposited on any sensitive electronic device.

  9. Effective improvement of interface modified strontium titanate based solid oxide fuel cell anodes by infiltration with nano-sized palladium and gadolinium-doped cerium oxide

    DEFF Research Database (Denmark)

    Abdul Jabbar, Mohammed Hussain; Høgh, Jens Valdemar Thorvald; Zhang, Wei

    2013-01-01

    The development of low temperature solid oxide fuel cell (SOFC) anodes by infiltration of Pd/Gd-doped cerium oxide (CGO) electrocatalysts in Nb-doped SrTiO3 (STN) backbones has been investigated. Modification of the electrode/electrolyte interface by thin layer of spin-coated CGO (400-500 nm...

  10. The effects of thermal annealing on the structure and the electrical transport properties of ultrathin gadolinia-doped ceria films grown by pulsed laser deposition

    DEFF Research Database (Denmark)

    Rodrigo, Katarzyna Agnieszka; Heiroth, S.; Pryds, Nini;

    2011-01-01

    Ultrathin crystalline films of 10 mol% gadolinia-doped ceria (CGO10) are grown on MgO (100) substrates by pulsed laser deposition at a moderate temperature of 400°C. As-deposited CGO10 layers of approximately 4 nm, 14 nm, and 22 nm thickness consist of fine grains with dimensions ≤∼11 nm. The films...

  11. Effect of cathode gas humidification on performance and durability of Solid Oxide Fuel Cells

    DEFF Research Database (Denmark)

    Nielsen, Jimmi; Hagen, Anke; Liu, Yi-Lin

    2010-01-01

    The effect of cathode inlet gas humidification was studied on single anode supported Solid Oxide Fuel Cells (SOFC's). The studied cells were Risø 2 G and 2.5 G. The former consists of a LSM:YSZ composite cathode, while the latter consists of a LSCF:CGO composite cathode on a CGO protection layer...

  12. Measurement of Restricted Atmospheric Barrier Discharge in Nonwoven Fiber Pores

    Science.gov (United States)

    Kawabe, Masaaki

    The restricted dielectric barrier discharge in nonwoven pores has been investigated by observation of the current pulse, the Lissajous figure and light emissions. The current pulse measurement revealed that homogeneity of the discharge was relatively high and the amount of individual pulse was quite small on the order of 0.01nC. Such a small current pulse demonstrates that nonwoven fiber is effective as a dielectric barrier. Analysis of the Lissajous figure, indicates the calculated value of the gap voltage for the discharge starting point of nonwoven fiber layers is close to what was predicted using the Paschen curve. On the other hand, the measured value of the gap voltage in the Lissajous figure is larger than its calculated value, so the surface charge on the dielectrics dissipated relatively fast. The observations of light emissions also showed a high homogeneity.

  13. Acyl-CoA binding protein and epidermal barrier function

    DEFF Research Database (Denmark)

    Bloksgaard, Maria; Neess, Ditte; Færgeman, Nils J;

    2014-01-01

    enzymatic systems; however, the precise function remains unknown. ACBP is expressed at relatively high levels in the epidermis, particularly in the suprabasal layers, which are highly active in lipid synthesis. Targeted disruption of the ACBP gene in mice leads to a pronounced skin and fur phenotype, which...... includes tousled and greasy fur, development of alopecia and scaling of the skin with age. Furthermore, epidermal barrier function is compromised causing a ~50% increase in transepidermal water loss relative to that of wild type mice. Lipidomic analyses indicate that this is due to significantly reduced...... levels of non-esterified very long chain fatty acids in the stratum corneum of ACBP(-/-) mice. Here we review the current knowledge of ACBP with special focus on the function of ACBP in the epidermal barrier. This article is part of a Special Issue entitled The Important Role of Lipids in the Epidermis...

  14. Influence of creep and cyclic oxidation in thermal barrier coatings

    Energy Technology Data Exchange (ETDEWEB)

    Seiler, Philipp; Baeker, Martin; Roesler, Joachim [Technische Univ. Braunschweig (Germany). Inst. fuer Werkstoffe

    2012-01-15

    The lifetime of thermal barrier coating systems is limited by cracks close to the interfaces, causing delamination. To study the failure mechanisms, a simplified model system is analysed which consists of a bond-coat bulk material, a thermally grown oxide, and an yttria-stabilised zirconia topcoat. The stresses in the model system are calculated using a finite element model which covers the simulation of full thermal cycles, creep in all layers, and the anisotropic oxidation during dwelling. Creep in the oxide and the thermal barrier coating is varied with the use of different creep parameter sets. The influence of creep in the bondcoat is analysed by using two different bond-coat materials: fast creeping Fecralloy and slow creeping oxide dispersion strengthened MA956. It is shown that creep in the bondcoat influences the lifetime of the coatings. Furthermore, a fast creeping thermally grown oxide benefits the lifetime of the coating system. (orig.)

  15. Overcoming of energy barrier for irreversible magnetization in nanocomposite magnets

    Science.gov (United States)

    Li, Zhu-bai; Zhang, Ying; Shen, Bao-gen; Zhang, Ming; Hu, Feng-xia; Sun, Ji-rong

    2017-01-01

    The irreversible magnetization occurs mainly in hard grains in nanocomposite magnets, and the domain wall involves a little part of defect region in irreversible magnetization due to the self-interaction. The investigation on thermal activation shows that the defect region involved in domain wall becomes narrower due to the TiNb addition in Pr2Fe14B/α-Fe magnets. The defect region augments the energy density in the negative direction of domain wall to overcome the energy barrier of perfect hard region. The soft phase, exchange-coupled with defect region at hard grain outer-layer, promotes magnetization reversal in defect region by exchange coupling. While the defect region plays a role as a ladder to overcome the energy barrier, resulting in the decrease of coecivity more or less depending upon the width and anisotropy of defect region.

  16. The Study of Kinetics of Diffusion and Phase Formation in the Layered Iron-Beryllium System

    Science.gov (United States)

    Kuterbekov, K. A.; Nurkenov, S. A.; Kislitsin, S. B.; Kuketayev, T. A.; Nurakhmetov, T. N.

    2017-02-01

    The methods of Mössbauer spectroscopy with X-ray phase analysis and Rutherford backscattering of protons were used to study the kinetics of diffusion and phase transformations in the layered iron-beryllium system. For the first time, the authors suggested and implemented a method for retardation of diffusion and phase formation processes in the layered iron-beryllium system using the barrier layer. It was established that the barrier layer limits the zone of beryllium dissolution in the area of implanted layer. The impact of the barrier layer on kinetics of thermally induced processes of diffusion and phase transformations in the layered Fe-Be system was determined using the example of Fe (10 μm): O+ - Be (0.7 μm) - 57Fe (0.1 μm). The authors suggested and implemented a method for recovery of the distribution function of the admixture atom concentration in the solid matrix-admixture solution on the basis of the X-ray diffraction data. The kinetics of mutual diffusion was determined for Fe and Be atoms in the α-Fe(Be) solution for both sides of the layered systems with a barrier layer and without it using the suggested method for recovery of the distribution function of the Be atom concentration. It was established that for the system without a barrier layer, the share of iron atoms ends at tann 5 h on the coating side and at tann 7.5 h on the iron side, while for the barrier layer case - at tann 20 h on the coating side and at tann 40 h on the iron side.

  17. Patient advocacy: barriers and facilitators

    Directory of Open Access Journals (Sweden)

    Nikravesh Mansoure

    2006-03-01

    Full Text Available Abstract Background During the two recent decades, advocacy has been a topic of much debate in the nursing profession. Although advocacy has embraced a crucial role for nurses, its extent is often limited in practice. While a variety of studies have been generated all over the world, barriers and facilitators in the patient advocacy have not been completely identified. This article presents the findings of a study exploring the barriers and facilitators influencing the role of advocacy among Iranian nurses. Method This study was conducted by grounded theory method. Participants were 24 Iranian registered nurses working in a large university hospital in Tehran, Iran. Semi-structured interviews were used for data collection. All interviews were transcribed verbatim and simultaneously Constant comparative analysis was used according to the Strauss and Corbin method. Results Through data analysis, several main themes emerged to describe the factors that hindered or facilitated patient advocacy. Nurses in this study identified powerlessness, lack of support, law, code of ethics and motivation, limited communication, physicians leading, risk of advocacy, royalty to peers, and insufficient time to interact with patients and families as barriers to advocacy. As for factors that facilitated nurses to act as a patient advocate, it was found that the nature of nurse-patient relationship, recognizing patients' needs, nurses' responsibility, physician as a colleague, and nurses' knowledge and skills could be influential in adopting the advocacy role. Conclusion Participants believed that in this context taking an advocacy role is difficult for nurses due to the barriers mentioned. Therefore, they make decisions and act as a patient's advocate in any situation concerning patient needs and status of barriers and facilitators. In most cases, they can not act at an optimal level; instead they accept only what they can do, which we called 'limited advocacy' in

  18. Dielectric barrier discharges applied for optical spectrometry

    Science.gov (United States)

    Brandt, S.; Schütz, A.; Klute, F. D.; Kratzer, J.; Franzke, J.

    2016-09-01

    The present review reflects the importance of dielectric barrier discharges for optical spectrometric detection in analytical chemistry. In contrast to usual discharges with a direct current the electrodes are separated by at least one dielectric barrier. There are two main features of the dielectric barrier discharges: they can serve as dissociation and excitation devices as well as ionization sources, respectively. This article portrays various application fields of dielectric barrier discharges in analytical chemistry used for elemental and molecular detection with optical spectrometry.

  19. FEM ANALYSIS OF THERMAL STRESSES IN GRADIENT THERMAL BARRIER COATINGS PRODUCED BY EB-PVD

    Institute of Scientific and Technical Information of China (English)

    H.B. Guo; H.B. Xu; S.K. Gong

    2001-01-01

    Gradient thermal barrier coatings (GTBCs) produced by co-deposition of mixtures ofAl-Al2 O3-YSZ onto metallic bond coat exhibited longer lifetimes than the two-layeredTBCs. The finite element method (FEM) numerical models were used to investigatestress and strain states in the GTBCs and traditional two-layered TBCs as they cooledto 750℃ from a stress-free state at 850℃.

  20. Article Including Environmental Barrier Coating System

    Science.gov (United States)

    Lee, Kang N. (Inventor)

    2015-01-01

    An enhanced environmental barrier coating for a silicon containing substrate. The enhanced barrier coating may include a bond coat doped with at least one of an alkali metal oxide and an alkali earth metal oxide. The enhanced barrier coating may include a composite mullite bond coat including BSAS and another distinct second phase oxide applied over said surface.

  1. Barriers to Mammography among Inadequately Screened Women

    Science.gov (United States)

    Stoll, Carolyn R. T.; Roberts, Summer; Cheng, Meng-Ru; Crayton, Eloise V.; Jackson, Sherrill; Politi, Mary C.

    2015-01-01

    Mammography use has increased over the past 20 years, yet more than 30% of women remain inadequately screened. Structural barriers can deter individuals from screening, however, cognitive, emotional, and communication barriers may also prevent mammography use. This study sought to identify the impact of number and type of barriers on mammography…

  2. Design of the Muong Chuoi Barrier

    NARCIS (Netherlands)

    Van Vliegen, K.; Van Oorschot, N.; Meinen, N.; Van Dijk, S.; Reimert, Z.

    2013-01-01

    Ho Chi Minh City has to deal with severe flooding in the rainy season. To prevent the city from this flooding, MARD set up plan 1547. The main idea of the plan is to build a ring dike around HCMC in combination with several movable tidal barriers. One of these barriers is the Muong Chuoi Barrier. I

  3. Market barriers to welfare product innovations

    NARCIS (Netherlands)

    Binnekamp, M.H.A.; Ingenbleek, P.T.M.

    2006-01-01

    New products that are based on higher animal welfare standards encounter several barriers on the road to market acceptance. The authors focus on the Dutch poultry sector and distinguish between retailer and consumer barriers. Retailer barriers include the powerful position of retailers, the price co

  4. Electrochemical Impedance Studies of SOFC Cathodes

    DEFF Research Database (Denmark)

    Hjelm, Johan; Søgaard, Martin; Wandel, Marie

    2007-01-01

    impedance of the cathode at intermediate operating temperatures. The perovskite is of the La-Sr-Co-Fe type. The EIS response of symmetrical cells with a thick (similar to 200 mu m) gadolinia doped ceria electrolyte was compared with the impedance contribution of the cathode of a full anode supported cell....... The full cells had a Ni-YSZ anode and anode support, a thin YSZ electrolyte, and a CGO barrier layer. The symmetric and full cell cathode responses were compared at open-circuit voltage. Humidified hydrogen was used as the fuel in the full cell measurements. Differential analysis of the impedance data...

  5. Overcome barriers to career success

    Energy Technology Data Exchange (ETDEWEB)

    Raudsepp, E.

    1983-04-01

    A test is given to determine if an engineer suffers from one of the three barriers to technical success: fear of success, fear of failure, or perfectionism. As in most such tests, the middle way is best. Successful engineers know that perfection cannot be attained, that they don't have time to worry about failure or success, and that by aiming and perservering in doing things well, success can be achieved.

  6. Wet Work and Barrier Function.

    Science.gov (United States)

    Fartasch, Manigé

    2016-01-01

    Wet work defined as unprotected exposure to humid environments/water; high frequencies of hand washing procedures or prolonged glove occlusion is believed to cause irritant contact dermatitis in a variety of occupations. This review considers the recent studies on wet-work exposure and focuses on its influence on barrier function. There are different methods to study the effect of wet work on barrier function. On the one hand, occupational cohorts at risk can be monitored prospectively by skin bioengineering technology and clinical visual scoring systems; on the other hand, experimental test procedures with defined application of water, occlusion and detergents are performed in healthy volunteers. Both epidemiological studies and the results of experimental procedures are compared and discussed. A variety of epidemiological studies analyze occupational cohorts at risk. The measurement of transepidermal water loss, an indicator of the integrity of the epidermal barrier, and clinical inspection of the skin have shown that especially the frequencies of hand washing and water contact/contact to aqueous mixtures seem to be the main factors for the occurrence of barrier alterations. On the other hand, in a single cross-sectional study, prolonged glove wearing (e.g. occlusion for 6 h per shift in clean-room workers) without exposure to additional hazardous substances seemed not to affect the skin negatively. But regarding the effect of occlusion, there is experimental evidence that previously occluded skin challenged with sodium lauryl sulfate leads to an increased susceptibility to the irritant with an aggravation of the irritant reaction. These findings might have relevance for the real-life situation in so far as after occupational glove wearing, the skin is more susceptible to potential hazards to the skin even during leisure hours.

  7. Removing Barriers to Interdisciplinary Research

    CERN Document Server

    Jacobs, Naomi

    2010-01-01

    A significant amount of high-impact contemporary scientific research occurs where biology, computer science, engineering and chemistry converge. Although programmes have been put in place to support such work, the complex dynamics of interdisciplinarity are still poorly understood. In this paper we interrogate the nature of interdisciplinary research and how we might measure its "success", identify potential barriers to its implementation, and suggest possible mechanisms for removing these impediments.

  8. Flexible pile thermal barrier insulator

    Science.gov (United States)

    Anderson, G. E.; Fell, D. M.; Tesinsky, J. S. (Inventor)

    1978-01-01

    A flexible pile thermal barrier insulator included a plurality of upstanding pile yarns. A generally planar backing section supported the upstanding pile yarns. The backing section included a plurality of filler yarns forming a mesh in a first direction. A plurality of warp yarns were looped around said filler yarns and pile yarns in the backing section and formed a mesh in a second direction. A binder prevented separation of the yarns in the backing section.

  9. Lake Borgne Surge Barrier Study

    Science.gov (United States)

    2010-09-01

    Savant , and Darla C. McVan September 2010 Approved for public release; distribution is unlimited. ERDC/CHL TR-10-10 September 2010 Lake...Borgne Surge Barrier Study S. Keith Martin, Gaurav Savant , and Darla C. McVan Coastal and Hydraulics Laboratory U.S. Army Engineer Research and...conducted by Keith Martin, Dr. Gaurav Savant , and Darla C. McVan. This work was conducted at the Coastal and Hydraulics Laboratory (CHL) of the

  10. Super Oxygen and Improved Water Vapor Barrier of Polypropylene Film with Polyelectrolyte Multilayer Nanocoatings.

    Science.gov (United States)

    Song, Yixuan; Tzeng, Ping; Grunlan, Jaime C

    2016-06-01

    Biaxially oriented polypropylene (BOPP) is widely used in packaging. Although its orientation increases mechanical strength and clarity, BOPP suffers from a high oxygen transmission rate (OTR). Multilayer thin films are deposited from water using layer-by-layer (LbL) assembly. Polyethylenimine (PEI) is combined with either poly(acrylic acid) (PAA) or vermiculite (VMT) clay to impart high oxygen barrier. A 30-bilayer PEI/VMT nanocoating (226 nm thick) improves the OTR of 17.8 μm thick BOPP by more than 30X, rivaling most inorganic coatings. PEI/PAA multilayers achieve comparable barrier with only 12 bilayers due to greater thickness, but these films exhibit increased oxygen permeability at high humidity. The PEI/VMT coatings actually exhibit improved oxygen barrier at high humidity (and also improve moisture barrier by more than 40%). This high barrier BOPP meets the criteria for sensitive food and some electronics packaging applications. Additionally, this water-based coating technology is cost effective and provides an opportunity to produce high barrier polypropylene film on an industrial scale.

  11. Polymeric hydrogen diffusion barrier, high-pressure storage tank so equipped, method of fabricating a storage tank and method of preventing hydrogen diffusion

    Science.gov (United States)

    Lessing, Paul A.

    2008-07-22

    An electrochemically active hydrogen diffusion barrier which comprises an anode layer, a cathode layer, and an intermediate electrolyte layer, which is conductive to protons and substantially impermeable to hydrogen. A catalytic metal present in or adjacent to the anode layer catalyzes an electrochemical reaction that converts any hydrogen that diffuses through the electrolyte layer to protons and electrons. The protons and electrons are transported to the cathode layer and reacted to form hydrogen. The hydrogen diffusion barrier is applied to a polymeric substrate used in a storage tank to store hydrogen under high pressure. A storage tank equipped with the electrochemically active hydrogen diffusion barrier, a method of fabricating the storage tank, and a method of preventing hydrogen from diffusing out of a storage tank are also disclosed.

  12. Thermal stability of amorphous tungsten/tungsten nitride synthesis using HFCVD as a diffusion barrier for copper

    Energy Technology Data Exchange (ETDEWEB)

    Asgary, Somayeh; Hantehzadeh, Mohammad Reza; Ghoranneviss, Mahmood [Islamic Azad University, Plasma Physics Research Center, Science and Research Branch, Tehran (Iran, Islamic Republic of); Boochani, Arash [Islamic Azad University, Department of Physics, Kermanshah Branch, Kermanshah (Iran, Islamic Republic of)

    2016-05-15

    The amorphous W/WN bi-layer with excellent thermal stability was successfully prepared by hot-filament chemical vapor deposition method on SiO{sub 2}/Si substrate. It was found that the W/WN bi-layer is technological importance because of its low resistivity and good diffusion barrier properties between Cu and Si up to 700 C for 30 min. The thermal stability was evaluated by X-ray diffractometer (XRD) and scanning electron microscope. The XRD results show that the Cu{sub 3}Si phase was formed by Cu diffusion through W/WN barrier for the 800 C annealed sample. The formation of the Cu-Si compounds denotes the failure of the W/WN diffusion barrier with rapid increase in sheet resistance of the film. The microstructure of the interface between W/WN and Cu reflects the stability and breakdown of the barriers. The failure of this amorphous barrier occurs with heat treatment when the deposited amorphous barrier material crystallizes. The major part of Cu diffusion in polycrystalline structure with disordered grain boundaries is controlled by grain boundaries. AFM results indicated a rapid increase in surface roughness at the diffusion barrier failure temperature. It was found that the grain size plays an important factor to control the thermally stability of the W/WN bi-layer. (orig.)

  13. TECHNOLOGICAL PECULIARITIES OF THERMAL BARRIER COATINGS BASED ON ZIRCONIUM DIOXIDE

    Directory of Open Access Journals (Sweden)

    V. V. Okovity

    2016-01-01

    Full Text Available A technology for formation of thermal barrier coatings (TBC based on zirconium dioxide has been developed in the paper. The paper investigates structures of phase composition and thermal stability of such developed coatings. Investigation results pertaining to formation of an oxide system ZrO2 – Y2O3, while using plasma spraying and subsequent high-energy processing, which allows to increase resistance of a thermal barrier coating to thermal cycling heat resistance of the coating at temperature of 1100 °C. This leads to longer protection of bottom layer against high-temperature exposure. The methodology is based on complex metallographic, X-ray diffraction and electron microscopy investigations of structural elements in composite plasma coatings of the ZrO2 – Y2O system. Resistance of plasma coatings (Мe – Cr – Al – Y/ZrO2 – Y2O3-type, used as TBC to protect gas turbine engine blades under conditions of frequent thermal cyclings is limited by cleavage of an outer ceramic layer. Structural and electron microprobe investigations have shown that as a result of thermal cycling an outer atmosphere due to porous structure of the ceramic coating layer, migrates to the surface of lower metal coating, causing its oxidation. As a result, the metal-ceramic Al2O3 layer is formed at a metal-ceramic interface and it changes a stress state of the coating that causes a reduction of protective properties. Thus, a high heat resistance of thermal barrier coatings depends on processes occurring at the interface between metal and ceramic coating layers. A laser impact on samples with TBC leads to changes in the structure of the oxide layer of ZrO2 – Y2O3. In this case its initial surface characterized by considerable relief is significantly flattened due to processing and the coating is fractured and it is separated in fragments. As the oxide coating has low thermal conductivity, and the time of laser exposure is about 10–3 sec, a heat flux

  14. Summary report on close-coupled subsurface barrier technology: Initial field trials to full-scale demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Heiser, J.H. [Brookhaven National Lab., Upton, NY (United States). Environmental and Waste Technology Center; Dwyer, B. [Sandia National Lab., Albuquerque, NM (United States)

    1997-09-01

    The primary objective of this project was to develop and demonstrate the installation and measure the performance of a close-coupled barrier for the containment of subsurface waste or contaminant migration. A close-coupled barrier is produced by first installing a conventional, low-cost, cement-grout containment barrier followed by a thin lining of a polymer grout. The resultant barrier is a cement-polymer composite that has economic benefits derived from the cement and performance benefits from the durable and resistant polymer layer. The technology has matured from a regulatory investigation of the issues concerning the use of polymers to laboratory compatibility and performance measurements of various polymer systems to a pilot-scale, single column injection at Sandia to full-scale demonstration. The feasibility of the close-coupled barrier concept was proven in a full-scale cold demonstration at Hanford, Washington and then moved to the final stage with a full-scale demonstration at an actual remediation site at Brookhaven National Laboratory (BNL). At the Hanford demonstration the composite barrier was emplaced around and beneath a 20,000 liter tank. The secondary cement layer was constructed using conventional jet grouting techniques. Drilling was completed at a 45{degree} angle to the ground, forming a cone-shaped barrier. The primary barrier was placed by panel jet-grouting with a dual-wall drill stem using a two part polymer grout. The polymer chosen was a high molecular weight acrylic. At the BNL demonstration a V-trough barrier was installed using a conventional cement grout for the secondary layer and an acrylic-gel polymer for the primary layer. Construction techniques were identical to the Hanford installation. This report summarizes the technology development from pilot- to full-scale demonstrations and presents some of the performance and quality achievements attained.

  15. Cold Sprayed Intermetallic Thermal Barrier Coatings

    Science.gov (United States)

    Leshchinsky, Evgeny

    Conventional thermal barrier coating (TBC) systems consist of a duplex structure with a metallic bond coat and a ceramic heat-isolative topcoat. Several recent research activities are concentrated on the development of improved multilayer bond coat and TBC materials. This study represents an investigation performed for the aluminum based bond coats, especially those with reduced thermal conductivities. Using alternative TBC materials, such as metal alloys and intermetallics, their processing methods can be further optimized to achieve the best thermal physical parameters. One example is the ten-layer system in which cold sprayed aluminum based intermetallics are synthesized. These systems demonstrated improved heat insulation and thermal fatigue capabilities compared to conventional TBC. The microstructures and properties of the laminar coatings were characterized by SEM, EDS, XRD; micromechanical and durability tests were performed to define the structure and coating formation mechanisms. Application prospects for HCCI engines are discussed. Fuel energy can be utilized more efficiently with the concept of low heat rejection engines with applied TBC.

  16. Diffraction of sound by nearly rigid barriers

    Science.gov (United States)

    Hadden, W. J., Jr.; Pierce, A. D.

    1976-01-01

    The diffraction of sound by barriers with surfaces of large, but finite, acoustic impedance was analyzed. Idealized source-barrier-receiver configurations in which the barriers may be considered as semi-infinite wedges are discussed. Particular attention is given to situations in which the source and receiver are at large distances from the tip of the wedge. The expression for the acoustic pressure in this limiting case is compared with the results of Pierce's analysis of diffraction by a rigid wedge. An expression for the insertion loss of a finite impedance barrier is compared with insertion loss formulas which are used extensively in selecting or designing barriers for noise control.

  17. Mathematical modeling of complex noise barriers

    Energy Technology Data Exchange (ETDEWEB)

    Hayek, S.I.

    1982-01-01

    Mathematical modeling of the noise reduction efficiency of highway noise barriers depends on the shape and absorptivity of the barrier, the influence of the impedance of the ground under the receiver, the atmospheric conditions as well as traffic details. The mathematical model for a barrier's noise reduction requires the knowledge of point-to-point acoustic diffraction models. In many instances, the shape of the barrier is simple; such as thin wall (edge), sharp wedge, and cylindrically topped berms. However, new designs of more efficient barriers have been investigated recently.

  18. Self-Construction from 2D to 3D: One-Pot Layer-by-Layer Assembly of Graphene Oxide Sheets Held Together by Coordination Polymers.

    Science.gov (United States)

    Zakaria, Mohamed B; Li, Cuiling; Ji, Qingmin; Jiang, Bo; Tominaka, Satoshi; Ide, Yusuke; Hill, Jonathan P; Ariga, Katsuhiko; Yamauchi, Yusuke

    2016-07-11

    Deposition of Ni-based cyanide bridged coordination polymer (NiCNNi) flakes onto the surfaces of graphene oxide (GO) sheets, which allows precise control of the resulting lamellar nanoarchitecture by in situ crystallization, is reported. GO sheets are utilized as nucleation sites that promote the optimized crystal growth of NiCNNi flakes. The NiCNNi-coated GO sheets then self-assemble and are stabilized as ordered lamellar nanomaterials. Regulated thermal treatment under nitrogen results in a Ni3 C-GO composite with a similar morphology to the starting material, and the Ni3 C-GO composite exhibits outstanding electrocatalytic activity and excellent durability for the oxygen reduction reaction.

  19. Experimental study on dielectric barrier discharge actuators operating in pulse mode

    NARCIS (Netherlands)

    Kotsonis, M.; Veldhuis, L.

    2010-01-01

    An experimental investigation is performed on the operation of dielectric barrier discharge plasma actuators used as manipulators of secondary and unsteady flow structures such as boundary layer instabilities or shedding vortices. The actuators are tested mainly in pulse mode. High sample rate hot-w

  20. Loadings in thermal barrier coatings of jet engine turbine blades an experimental research and numerical modeling

    CERN Document Server

    Sadowski, Tomasz

    2016-01-01

    This book discusses complex loadings of turbine blades and protective layer Thermal Barrier Coating (TBC), under real working airplane jet conditions. They obey both multi-axial mechanical loading and sudden temperature variation during starting and landing of the airplanes. In particular, two types of blades are analyzed: stationary and rotating, which are widely applied in turbine engines produced by airplane factories.

  1. INTERFACE STRUCTURE AND SCHOTTKY BARRIERS AT EPITAXIAL SI(111)/PB INTERFACES

    NARCIS (Netherlands)

    WEITERING, HH; HIBMA, T; HESLINGA, DR; KLAPWIJK, TM

    1991-01-01

    Two different epitaxial Si(111)/Pb interfaces can be prepared, i.e. a metastable interface with a (7 x 7) and a stable interface with an incommensurate but close to (square-root 3 x square-root 3)R30-degrees surface unit cell. Schottky barrier heights of diodes made by depositing thick Pb layers on

  2. Oxygen- and water-induced degradation of an inverted polymer solar cell: the barrier effect

    DEFF Research Database (Denmark)

    Vesterager Madsen, Morten; Norrman, Kion; Krebs, Frederik C

    2011-01-01

    , the barrier effect is reported in both a dry oxygen atmosphere and an oxygen-free humid atmosphere. The devices under study are comprised of a bulk heterojunction formed by poly(3-hexylthiophene) and [6,6]-phenyl-C61-butyric acid methyl ester sandwiched between a layer of zinc oxide (electron transporting...

  3. Ultrathin MgO diffusion barriers for ferromagnetic electrodes on GaAs(001).

    Science.gov (United States)

    Sarkar, Anirban; Wang, Shibo; Grafeneder, Wolfgang; Arndt, Martin; Koch, Reinhold

    2015-04-24

    Ultrathin MgO(100) films serving as a diffusion barrier between ferromagnetic electrodes and GaAs(001) semiconductor templates have been investigated. Using Fe as an exemplary ferromagnetic material, heterostructures of Fe/MgO/GaAs(001) were prepared at 200 °C with the MgO thickness ranging from 1.5 to 3 nm. Structural characterization reveals very good crystalline ordering in all layers of the heterostructure. Auger electron spectroscopy depth-profiling and cross-sectional high-resolution transmission electron microscopy evidence diffusion of Fe into MgO and-for too thin MgO barriers-further into GaAs(001). Our results recommend a MgO barrier thickness larger than or equal to 2.6 nm for its application as a reliable diffusion barrier on GaAs(001) in spintronics devices.

  4. Visualization experiment to investigate capillary barrier performance in the context of a Yucca Mountain emplacement drift.

    Science.gov (United States)

    Tidwell, Vincent C; Glass, Robert J; Chocas, Connie; Barker, Glenn; Orear, Lee

    2003-01-01

    The use of capillary barriers as engineered backfill systems to divert water away from radioactive waste potentially stored in a Yucca Mountain emplacement drift is investigated. We designed and conducted a flow visualization experiment to investigate capillary barrier performance in this context. A two-dimensional, thin slab, test system replicated the physical emplacement drift to one-quarter scale (1.4-m diameter) and included the simulated drift wall, waste canister, pedestal, capillary barrier backfill, and host-rock fracture system. Water was supplied at the top of the simulated drift and allowed to discharge by way of wicks located along the left wall of the cell (simulated fractures) or by a gravity drain at the bottom of the right side (simulated impermeable rock with floor drain). Photographs captured the migration of water and a blue dye tracer within the system, analytical balances measured the mass balance of water, while tensiometers measured the capillary pressure at numerous locations. Of particular concern to this test was the drainage of the capillary barrier, which terminates against the drift wall. We found that while the simulated fractures (left side) and drain (right side) each influenced the performance of the capillary barrier at early time, they had little differential affect at later times. Also of concern was the small disparity in capillary properties between the fine and coarse layer (limited by the need of a fine-grained material that would not filter into the coarse layer under dry conditions). While the capillary barrier was able to divert the majority of flow toward the edges of the system and away from the simulated waste canister, the barrier did not preclude flow in the coarse layer, which was noted to be visually wet next to the waste canister on day 92 and was continuing to take on water at termination on day 112.

  5. Dielectric barrier discharges in analytical chemistry.

    Science.gov (United States)

    Meyer, C; Müller, S; Gurevich, E L; Franzke, J

    2011-06-21

    The present review reflects the importance of dielectric barrier discharges in analytical chemistry. Special about this discharge is-and in contrast to usual discharges with direct current-that the plasma is separated from one or two electrodes by a dielectric barrier. This gives rise to two main features of the dielectric barrier discharges; it can serve as dissociation and excitation device and as ionization mechanism, respectively. The article portrays the various application fields for dielectric barrier discharges in analytical chemistry, for example the use for elemental detection with optical spectrometry or as ionization source for mass spectrometry. Besides the introduction of different kinds of dielectric barrier discharges used for analytical chemistry from the literature, a clear and concise classification of dielectric barrier discharges into capacitively coupled discharges is provided followed by an overview about the characteristics of a dielectric barrier discharge concerning discharge properties and the ignition mechanism.

  6. Avoiding barriers in control of mowing robot

    Institute of Scientific and Technical Information of China (English)

    QIU Bai-jing; QIAN Guo-hong; XIANG Zhong-ping; LI Zuo-peng

    2006-01-01

    Due to complicated barriers,it is difficult to track the path of the mowing robot and to avoid barriers.In order to solve the problem,a method based on distance-measuring sensors and fuzzy control inputs was proposed.Its track was composed of beelines and was easy to tail.The fuzzy control inputs were based on the front barrier distance and the difference between the left and right barrier distance measured by ultrasonic sensors;the output was the direction angle.The infrared sensors around the robot improved its safety in avoiding barriers.The result of the method was feasible,agile,and stable.The distance between the robot and the barriers could be changed by altering the inputs and outputs of fuzzy control and the length of the beelines.The disposed sensors can fulfill the need of the robot in avoiding barriers.

  7. Enhanced water vapour barrier and grease resistance of paper bilayer-coated with chitosan and beeswax.

    Science.gov (United States)

    Zhang, Weiwei; Xiao, Huining; Qian, Liying

    2014-01-30

    In order to overcome the deficiencies of single layer coating, bilayer coated papers were prepared by two separate coating procedures using various combinations of proteins or polysaccharides with beeswax. Among those combinations, chitosan-beeswax bilayer coated paper showed the best water vapour barrier property. It was observed that as the concentration of chitosan solution increased from 1.0 to 3.0 wt%, its water vapour transport rate (WVTR) decreased from 171.6 to 52.8 g/m(2)/d but using reduced beeswax coating weight (from 10.1 to 4.9 g/m(2)). It also displayed an enhanced performance of grease resistance. Scanning electron microscopy (SEM) showed that beeswax layer was fitted to chitosan layer so closely that these two layers are indistinguishable. Confocal laser scanning microscope (CLSM) further confirmed the existence of an integrated chitosan film between beeswax layer and paper base and a thin composite layer consisting of chitosan and beeswax.

  8. Improved epidermal barrier formation in human skin models by chitosan modulated dermal matrices

    Science.gov (United States)

    Mieremet, Arnout; Rietveld, Marion; Absalah, Samira; van Smeden, Jeroen

    2017-01-01

    Full thickness human skin models (FTMs) contain an epidermal and a dermal equivalent. The latter is composed of a collagen dermal matrix which harbours fibroblasts. Current epidermal barrier properties of FTMs do not fully resemble that of native human skin (NHS), which makes these human skin models less suitable for barrier related studies. To further enhance the resemblance of NHS for epidermal morphogenesis and barrier formation, we modulated the collagen dermal matrix with the biocompatible polymer chitosan. Herein, we report that these collagen-chitosan FTMs (CC-FTMs) possess a well-organized epidermis and maintain both the early and late differentiation programs as in FTMs. Distinctively, the epidermal cell activation is reduced in CC-FTMs to levels observed in NHS. Dermal-epidermal interactions are functional in both FTM types, based on the formation of the basement membrane. Evaluation of the barrier structure by the organization of the extracellular lipid matrix of the stratum corneum revealed an elongated repeat distance of the long periodicity phase. The ceramide composition exhibited a higher resemblance of the NHS, based on the carbon chain-length distribution and subclass profile. The inside-out barrier functionality indicated by the transepidermal water loss is significantly improved in the CC-FTMs. The expression of epidermal barrier lipid processing enzymes is marginally affected, although more restricted to a single granular layer. The novel CC-FTM resembles the NHS more closely, which makes them a promising tool for epidermal barrier related studies. PMID:28333992

  9. Residual Stresses Modeled in Thermal Barrier Coatings

    Science.gov (United States)

    Freborg, A. M.; Ferguson, B. L.; Petrus, G. J.; Brindley, W. J.

    1998-01-01

    Thermal barrier coating (TBC) applications continue to increase as the need for greater engine efficiency in aircraft and land-based gas turbines increases. However, durability and reliability issues limit the benefits that can be derived from TBC's. A thorough understanding of the mechanisms that cause TBC failure is a key to increasing, as well as predicting, TBC durability. Oxidation of the bond coat has been repeatedly identified as one of the major factors affecting the durability of the ceramic top coat during service. However, the mechanisms by which oxidation facilitates TBC failure are poorly understood and require further characterization. In addition, researchers have suspected that other bond coat and top coat factors might influence TBC thermal fatigue life, both separately and through interactions with the mechanism of oxidation. These other factors include the bond coat coefficient of thermal expansion, the bond coat roughness, and the creep behavior of both the ceramic and bond coat layers. Although it is difficult to design an experiment to examine these factors unambiguously, it is possible to design a computer modeling "experiment" to examine the action and interaction of these factors, as well as to determine failure drivers for TBC's. Previous computer models have examined some of these factors separately to determine their effect on coating residual stresses, but none have examined all the factors concurrently. The purpose of this research, which was performed at DCT, Inc., in contract with the NASA Lewis Research Center, was to develop an inclusive finite element model to characterize the effects of oxidation on the residual stresses within the TBC system during thermal cycling as well as to examine the interaction of oxidation with the other factors affecting TBC life. The plasma sprayed, two-layer thermal barrier coating that was modeled incorporated a superalloy substrate, a NiCrAlY bond coat, and a ZrO2-8 wt % Y2O3 ceramic top coat. We

  10. Curvature behaviour of multilayer specimens of thermal barrier systems

    Energy Technology Data Exchange (ETDEWEB)

    Blandin, G.; Bruenings, S.E.; Steinbrech, R.W.; Singheiser, L. [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Werkstoffe und Verfahren der Energietechnik

    2000-07-01

    The impact of residual stresses on the elastic and plastic deformation behavior of plasma sprayed and physical vapor deposited thermal barrier systems was studied. In particular, multilayer specimen strips composed of plasma sprayed partially stabilized zirconia, oxidation resistant NiCoCrAlY bond-coat and Ni-based superalloy substrate were tested. The experiments focused on the in-situ observation of specimen curvature during thermal cycling between room temperature and 1000 C. The mechanical response of specimens with different layer thickness was analyzed with a thermoelastic model to derive elastic modulus and thermal expansion of the ceramic top coat, both parameters as a function of temperature. With the thermoelastic data of all three layers, the residual stress distribution could be calculated analytically. The results of the two coating variants are compared. The deviation from thermoelastic behavior at higher temperature is discussed in terms of stress relaxation in the bond coat due to plastic deformation. (orig.)

  11. Tunneling without barriers with gravity

    CERN Document Server

    Kanno, Sugumi; Soda, Jiro

    2012-01-01

    We consider the vacuum decay of the flat Minkowski space to an anti-de Sitter space. We find a one-parameter family of potentials that allow exact, analytical instanton solutions describing tunneling without barriers in the presence of gravity. In the absence of gravity such instantons were found and discussed by Lee and Weinberg more than a quarter of a century ago. The bounce action is also analytically computed. We discuss possible implications of these new instantons to cosmology in the context of the string theory landscape.

  12. Ozone Layer Protection

    Science.gov (United States)

    ... Search Search Ozone Layer Protection Share Facebook Twitter Google+ Pinterest Contact Us Ozone Layer Protection Welcome to ... Managing Refrigerant Emissions Stationary Refrigeration and Air Conditioning Car and Other Mobile Air Conditioning GreenChill Partnership Responsible ...

  13. Basic Ozone Layer Science

    Science.gov (United States)

    Learn about the ozone layer and how human activities deplete it. This page provides information on the chemical processes that lead to ozone layer depletion, and scientists' efforts to understand them.

  14. VSWI Wetlands Advisory Layer

    Data.gov (United States)

    Vermont Center for Geographic Information — This dataset represents the DEC Wetlands Program's Advisory layer. This layer makes the most up-to-date, non-jurisdictional, wetlands mapping avaiable to the public...

  15. Electrical control of exchange bias via oxygen migration across CoO-ZnO nanocomposite barrier

    Science.gov (United States)

    Li, Q.; Yan, S. S.; Xu, J.; Li, S. D.; Zhao, G. X.; Long, Y. Z.; Shen, T. T.; Zhang, K.; Zhang, J.

    2016-12-01

    We proposed a nanocomposite barrier CoO-ZnO for magnetism manipulation in Co/CoO-ZnO/Ag heterojunctions. Both electrical control of magnetism and resistive switching were realized in this junction. An electrical tunable exchange bias of CoO1-v (v denotes O vacancies) on Co films was realized using voltages below 1 volt. The magnetism modulation associated with resistive switching can be attributed to the oxygen ions migration between the insulating CoO1-v layer and the semiconductive ZnO1-v layer, which can cause both ferromagnetic phase and resistance switching of CoO1-v layer.

  16. Effect of Anti-Diffusion Oxide Layer on Enhanced Thermal Stability of Magnetic Tunnel Junctions

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zong-Zhi; ZHAO Hui; Cardoso S.; Freitas P. P.

    2006-01-01

    @@ Magnetic tunnel junctions (MTJs) with one proper oxidized FeOx layer placed between the Al oxide barrier and the top CoFe pinned layer show large tunnelling-magnetoresistance (TMR) signals as high as 39% after anneal at 380℃ .

  17. Fabrication of magnetic tunnel junctions with epitaxial and textured ferromagnetic layers

    Science.gov (United States)

    Chang, Y. Austin; Yang, Jianhua Joshua

    2008-11-11

    This invention relates to magnetic tunnel junctions and methods for making the magnetic tunnel junctions. The magnetic tunnel junctions include a tunnel barrier oxide layer sandwiched between two ferromagnetic layers both of which are epitaxial or textured with respect to the underlying substrate upon which the magnetic tunnel junctions are grown. The magnetic tunnel junctions provide improved magnetic properties, sharper interfaces and few defects.

  18. Unusually efficient photocurrent extraction in monolayer van der Waals heterostructure by tunnelling through discretized barriers

    Science.gov (United States)

    Yu, Woo Jong; Vu, Quoc An; Oh, Hyemin; Nam, Hong Gi; Zhou, Hailong; Cha, Soonyoung; Kim, Joo-Youn; Carvalho, Alexandra; Jeong, Munseok; Choi, Hyunyong; Castro Neto, A. H.; Lee, Young Hee; Duan, Xiangfeng

    2016-11-01

    Two-dimensional layered transition-metal dichalcogenides have attracted considerable interest for their unique layer-number-dependent properties. In particular, vertical integration of these two-dimensional crystals to form van der Waals heterostructures can open up a new dimension for the design of functional electronic and optoelectronic devices. Here we report the layer-number-dependent photocurrent generation in graphene/MoS2/graphene heterostructures by creating a device with two distinct regions containing one-layer and seven-layer MoS2 to exclude other extrinsic factors. Photoresponse studies reveal that photoresponsivity in one-layer MoS2 is surprisingly higher than that in seven-layer MoS2 by seven times. Spectral-dependent studies further show that the internal quantum efficiency in one-layer MoS2 can reach a maximum of 65%, far higher than the 7% in seven-layer MoS2. Our theoretical modelling shows that asymmetric potential barriers in the top and bottom interfaces of the graphene/one-layer MoS2/graphene heterojunction enable asymmetric carrier tunnelling, to generate usually high photoresponsivity in one-layer MoS2 device.

  19. TRITIUM BARRIER MATERIALS AND SEPARATION SYSTEMS FOR THE NGNP

    Energy Technology Data Exchange (ETDEWEB)

    Sherman, S; Thad Adams, T

    2008-07-17

    Contamination of downstream hydrogen production plants or other users of high-temperature heat is a concern of the Next Generation Nuclear Plant (NGNP) Project. Due to the high operating temperatures of the NGNP (850-900 C outlet temperature), tritium produced in the nuclear reactor can permeate through heat exchangers to reach the hydrogen production plant, where it can become incorporated into process chemicals or the hydrogen product. The concentration limit for tritium in the hydrogen product has not been established, but it is expected that any future limit on tritium concentration will be no higher than the air and water effluent limits established by the NRC and the EPA. A literature survey of tritium permeation barriers, capture systems, and mitigation measures is presented and technologies are identified that may reduce the movement of tritium to the downstream plant. Among tritium permeation barriers, oxide layers produced in-situ may provide the most suitable barriers, though it may be possible to use aluminized surfaces also. For tritium capture systems, the use of getters is recommended, and high-temperature hydride forming materials such as Ti, Zr, and Y are suggested. Tritium may also be converted to HTO in order to capture it on molecular sieves or getter materials. Counter-flow of hydrogen may reduce the flux of tritium through heat exchangers. Recommendations for research and development work are provided.

  20. Subsurface Barrier Formation as a CO2 Leakage Mitigation Technology

    Science.gov (United States)

    Castaneda Herrera, C. A.; Stevens, G.; Haese, R. R.

    2015-12-01

    Long-term CO2 containment in a geological storage reservoir is a key criterion for successfully implementing carbon capture and storage (CCS), however, CO2 leakage through different pathways cannot be completely ruled out in some instances. In this study we investigate the conditions for reactive barrier formation as a technology to mitigate and remediate CO2 leakage. We propose to inject a liquid reagent consistent of an alkaline sodium-silicate solution on top of the storage caprock, which will lead to silica mineral precipitation when in contact with an acidic, CO2-enriched fluid. This reaction will create a barrier that seals the leakage by reducing the permeability. Preliminary modelling has shown that the density, viscosity and alkalinity of the reagent fluid are critical for a successful seal formation, whereas differences in formation water composition and in the rock mineral composition are less important. In order to study the reaction through experiments, different reagent solutions were prepared and characterised in terms of silica concentration, density, viscosity and buffer capacity. In a static, diffusion-controlled batch experiment we observed silica mineral precipitation in the outer layer of the piece of rock inhibiting further mixing of the two fluids and slowing down the initial reaction rate. Core-flood experiments will be carried out to simulate barrier formation under fluid flow conditions. Here, the sealing efficiency of the reaction will be continuously measured in terms of a change in permeability.

  1. Loss of ceramide synthase 3 causes lethal skin barrier disruption.

    Science.gov (United States)

    Jennemann, Richard; Rabionet, Mariona; Gorgas, Karin; Epstein, Sharon; Dalpke, Alexander; Rothermel, Ulrike; Bayerle, Aline; van der Hoeven, Franciscus; Imgrund, Silke; Kirsch, Joachim; Nickel, Walter; Willecke, Klaus; Riezman, Howard; Gröne, Hermann-Josef; Sandhoff, Roger

    2012-02-01

    The stratum corneum as the outermost epidermal layer protects against exsiccation and infection. Both the underlying cornified envelope (CE) and the intercellular lipid matrix contribute essentially to these two main protective barriers. Epidermis-unique ceramides with ultra-long-chain acyl moities (ULC-Cers) are key components of extracellular lipid lamellae (ELL) and are bound to CE proteins, thereby contributing to the cornified lipid envelope (CLE). Here, we identified human and mouse ceramide synthase 3 (CerS3), among CerS1-6, to be exclusively required for the ULC-Cer synthesis in vitro and of mouse CerS3 in vivo. Deficiency of CerS3 in mice results in complete loss of ULC-Cers (≥C26), lack of continuous ELL and a non-functional CLE. Consequently, newborn mutant mice die shortly after birth from transepidermal water loss. Mutant skin is prone to Candida albicans infection highlighting ULC-Cers to be pivotal for both barrier functions. Persistent periderm, hyperkeratosis and deficient cornification are hallmarks of mutant skin demonstrating loss of Cers to trigger a keratinocyte maturation arrest at an embryonic pre-barrier stage.

  2. Experiments on the low frequency barrier characteristics of cellular metamaterial panels in a diffuse sound field.

    Science.gov (United States)

    Varanasi, Srinivas; Bolton, J Stuart; Siegmund, Thomas

    2017-01-01

    The metamaterial under investigation here consists of a periodic arrangement of unit plates in a grid-like frame such that there is a contrast in the local areal mass between cell interior and cell wall. In the low frequency range and under normal incidence this metamaterial panel exhibits a sound transmission loss significantly larger than the transmission loss of an unstructured panel with the same homogeneous mass per unit area. However, when the incident sound field is diffuse, the relative advantage of the metamaterial barrier is reduced or eliminated. A sequence of experiments is documented to demonstrate that the relative advantage of the metamaterial barrier can be realized even in a diffuse sound field by creating a hybrid barrier system which embeds the metamaterial layer between a normalizing waveguide layer on the incident side and an absorbing layer on the transmitted side. The sound normalizing waveguide layer is a lattice structure, and the absorbing layer is high performance glass fiber mat. By using measurements of the transmission loss of a 1.2 m square panel system the role of each of these components is demonstrated.

  3. Westinghouse thermal barrier coatings development

    Energy Technology Data Exchange (ETDEWEB)

    Goedjen, J.G.; Wagner, G. [Westinghouse Electric Corp., Orlando, FL (United States)

    1995-10-01

    Westinghouse, in conjunction with the Department of Energy and Oak Ridge National Laboratory, has embarked upon a program for the development of advanced thermal barrier coatings for industrial gas turbines. Development of thermal barrier coatings (TBC`s) for industrial gas turbines has relied heavily on the transfer of technology from the aerospace industry. Significant differences in the time/temperature/stress duty cycles exist between these two coating applications. Coating systems which perform well in aerospace applications may not been optimized to meet power generation performance requirements. This program will focus on development of TBC`s to meet the specific needs of power generation applications. The program is directed at developing a state-of-the-art coating system with a minimum coating life of 25,000 hours at service temperatures required to meet increasing operating efficiency goals. Westinghouse has assembled a team of university and industry leaders to accomplish this goal. Westinghouse will coordinate the efforts of all program participants. Chromalloy Turbine Technologies, Inc. and Sermatech International, Inc. will be responsible for bond coat and TBC deposition technology. Praxair Specialty Powders, Inc. will be responsible for the fabrication of all bond coat and ceramic powders for the program. Southwest Research Institute will head the life prediction modelling effort; they will also be involved in coordinating nondestructive evaluation (NDE) efforts. Process modelling will be provided by the University of Arizona.

  4. Overcoming Barriers in Unhealthy Settings

    Directory of Open Access Journals (Sweden)

    Michael K. Lemke

    2016-03-01

    Full Text Available We investigated the phenomenon of sustained health-supportive behaviors among long-haul commercial truck drivers, who belong to an occupational segment with extreme health disparities. With a focus on setting-level factors, this study sought to discover ways in which individuals exhibit resiliency while immersed in endemically obesogenic environments, as well as understand setting-level barriers to engaging in health-supportive behaviors. Using a transcendental phenomenological research design, 12 long-haul truck drivers who met screening criteria were selected using purposeful maximum sampling. Seven broad themes were identified: access to health resources, barriers to health behaviors, recommended alternative settings, constituents of health behavior, motivation for health behaviors, attitude toward health behaviors, and trucking culture. We suggest applying ecological theories of health behavior and settings approaches to improve driver health. We also propose the Integrative and Dynamic Healthy Commercial Driving (IDHCD paradigm, grounded in complexity science, as a new theoretical framework for improving driver health outcomes.

  5. PWM Converter Power Density Barriers

    Science.gov (United States)

    Kolar, Johann W.; Drofenik, Uwe; Biela, Juergen; Heldwein, Marcelo; Ertl, Hans; Friedli, Thomas; Round, Simon

    Power density of power electronic converters has roughly doubled every 10 years since 1970. Behind this trajectory is the continuous advancement of power semiconductor devices, which has increased the converter switching frequencies by a factor of 10 every decade. However, today's cooling concepts and passive components are major barriers for a continuation of this trend. To identify such technological barriers, this paper investigates the volume of the cooling system and passive components as a function of the switching frequency for power electronic converters and determines the switching frequency that minimizes the total volume. A power density limit of 28kW/dm3 at 300kHz is calculated for an isolated DC-DC converter, 44kW/dm3 at 820kHz for a three-phase unity power factor PWM rectifier, and 26kW/dm3 at 21kHz for a sparse matrix converter. For single-phase AC-DC conversion a general limit of 35kW/dm3 results from the DC link capacitor. These power density limits highlight the need to broaden the scope of power electronics research to include cooling systems, high frequency electromagnetics, interconnection and packaging technology, and multi-domain modelling and simulation to ensure further advancement along the power density trajectory.

  6. Barriers to medical error reporting

    Directory of Open Access Journals (Sweden)

    Jalal Poorolajal

    2015-01-01

    Full Text Available Background: This study was conducted to explore the prevalence of medical error underreporting and associated barriers. Methods: This cross-sectional study was performed from September to December 2012. Five hospitals, affiliated with Hamadan University of Medical Sciences, in Hamedan,Iran were investigated. A self-administered questionnaire was used for data collection. Participants consisted of physicians, nurses, midwives, residents, interns, and staffs of radiology and laboratory departments. Results: Overall, 50.26% of subjects had committed but not reported medical errors. The main reasons mentioned for underreporting were lack of effective medical error reporting system (60.0%, lack of proper reporting form (51.8%, lack of peer supporting a person who has committed an error (56.0%, and lack of personal attention to the importance of medical errors (62.9%. The rate of committing medical errors was higher in men (71.4%, age of 50-40 years (67.6%, less-experienced personnel (58.7%, educational level of MSc (87.5%, and staff of radiology department (88.9%. Conclusions: This study outlined the main barriers to reporting medical errors and associated factors that may be helpful for healthcare organizations in improving medical error reporting as an essential component for patient safety enhancement.

  7. Dual layer hollow fiber sorbents: Concept, fabrication and characterization

    KAUST Repository

    Bhandari, Dhaval

    2013-02-01

    Hollow fiber sorbents are pseudo-monolithic separations materials created with fiber spinning technology using a polymer \\'binder\\', impregnated with high loadings of sorbent \\'fillers\\' [1]. To increase purified gas recovery during the sorption step and to ensure consistent sorption capacity over repeated cycles, a dense, thin polymer barrier layer on the fiber sorbents is needed to allow only thermal interactions between the sorbate loaded layer and the thermal regeneration fluid. This paper considers materials and methods to create delamination-free dual layer fiber sorbents, with a porous core and a barrier sheath layer formed using a simultaneous co-extrusion process. Low permeability polymers were screened for sheath layer creation, with the core layer comprising cellulose acetate polymer as binder and zeolite NaY as sorbent fillers. Appropriate core and sheath layer dope compositions were determined by the cloud-point method and rheology measurements. The morphology of the as-spun fibers was characterized in detail by SEM, EDX and gas permeation analysis. A simplified qualitative model is described to explain the observed fiber morphology. The effects of core, sheath spin dope and bore fluid compositions, spinning process parameters such as air-gap height, spin dope and coagulation bath temperatures, and elongation draw ratio are examined in detail. © 2012 Elsevier B.V. All rights reserved.

  8. An Electrostatic-Barrier-Forming Window that Captures Airborne Pollen Grains to Prevent Pollinosis

    Science.gov (United States)

    Takikawa, Yoshihiro; Matsuda, Yoshinori; Nonomura, Teruo; Kakutani, Koji; Kusakari, Shin-Ichi; Toyoda, Hideyoshi

    2017-01-01

    An electrostatic-barrier-forming window (EBW) was devised to capture airborne pollen, which can cause allergic pollinosis. The EBW consisted of three layers of insulated conductor wires (ICWs) and two voltage generators that supplied negative charges to the two outer ICW layers and a positive charge to the middle ICW layer. The ICWs generated an attractive force that captured pollen of the Japanese cedar, Cryptomeria japonica, from air blown through the EBW. The attractive force was directly proportional to the applied voltage. At ≥3.5 kV, the EBW exerted sufficient force to capture all pollen carried at an air flow of 3 m/s, and pollen-free air passed through the EBW. The findings demonstrated that the electrostatic barrier that formed inside the EBW was very effective at capturing airborne pollen; thus, it could allow a home to remain pollen-free and healthy despite continuous pollen exposure.

  9. Influences of Injection Barrier and Mobility on Recombination Rate and Zone in OLEDs

    Institute of Scientific and Technical Information of China (English)

    ZHU Ru-hui; LI Hong-jian; YAN Ling-ling; HU Jin; PAN Yan-zhi

    2006-01-01

    The luminous efficiency of organic light-emitting devices depends on the recombination probability of electrons injected at the cathode and holes at the anode. A theoretical model to calculate the distribution of current densities and the recombination rate in organic single layer devices is presented taking into account the charge injection process at each electrode, charge transport and recombination in organic layer. The calculated results indicate that efficient single-layer devices are possible by adjusting the barrier heights at two electrodes and the carrier mobilities. Lowering the barrier heights can improve the electroluminescent(EL) efficiency pronouncedly in many cases, and efficient devices are still possible using an ohmic contact to inject the low mobility carrier, and a contact limited contact to inject the high mobility carrier. All in all, high EL efficiency needs to consider sufficient recombination, enough injected carriers and well transport.

  10. Relativistic Double Barrier Problem with Three Sub-Barrier Transmission Resonance Regions

    CERN Document Server

    Alhaidari, A D; Jellal, A

    2010-01-01

    We obtain exact scattering solutions of the Dirac equation in 1+1 dimensions for a double square barrier vector potential. The potential floor between the two barriers is higher than 2mc^2 whereas the top of the barriers is at least 2mc^2 above the floor. The relativistic version of the conventional double barrier transmission resonance is obtained for energies within + or - mc^2 from the height of the barriers. However, we also find two more (sub-barrier) transmission resonance regions below the conventional one. Both are located within the two Klein energy zones and characterized by resonances that are broader than the conventional ones.

  11. Thermal Residual Stress in Environmental Barrier Coated Silicon Nitride - Modeled

    Science.gov (United States)

    Ali, Abdul-Aziz; Bhatt, Ramakrishna T.

    2009-01-01

    When exposed to combustion environments containing moisture both un-reinforced and fiber reinforced silicon based ceramic materials tend to undergo surface recession. To avoid surface recession environmental barrier coating systems are required. However, due to differences in the elastic and thermal properties of the substrate and the environmental barrier coating, thermal residual stresses can be generated in the coated substrate. Depending on their magnitude and nature thermal residual stresses can have significant influence on the strength and fracture behavior of coated substrates. To determine the maximum residual stresses developed during deposition of the coatings, a finite element model (FEM) was developed. Using this model, the thermal residual stresses were predicted in silicon nitride substrates coated with three environmental coating systems namely barium strontium aluminum silicate (BSAS), rare earth mono silicate (REMS) and earth mono di-silicate (REDS). A parametric study was also conducted to determine the influence of coating layer thickness and material parameters on thermal residual stress. Results indicate that z-direction stresses in all three systems are small and negligible, but maximum in-plane stresses can be significant depending on the composition of the constituent layer and the distance from the substrate. The BSAS and REDS systems show much lower thermal residual stresses than REMS system. Parametric analysis indicates that in each system, the thermal residual stresses can be decreased with decreasing the modulus and thickness of the coating.

  12. Barrier experiment: Shock initiation under complex loading

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-01-12

    The barrier experiments are a variant of the gap test; a detonation wave in a donor HE impacts a barrier and drives a shock wave into an acceptor HE. The question we ask is: What is the trade-off between the barrier material and threshold barrier thickness to prevent the acceptor from detonating. This can be viewed from the perspective of shock initiation of the acceptor subject to a complex pressure drive condition. Here we consider key factors which affect whether or not the acceptor undergoes a shock-to-detonation transition. These include the following: shock impedance matches for the donor detonation wave into the barrier and then the barrier shock into the acceptor, the pressure gradient behind the donor detonation wave, and the curvature of detonation front in the donor. Numerical simulations are used to illustrate how these factors affect the reaction in the acceptor.

  13. Effect of graphene tunnel barrier on Schottky barrier height of Heusler alloy Co2MnSi/graphene/n-Ge junction

    Science.gov (United States)

    Gui-fang, Li; Jing, Hu; Hui, Lv; Zhijun, Cui; Xiaowei, Hou; Shibin, Liu; Yongqian, Du

    2016-02-01

    We demonstrate that the insertion of a graphene tunnel barrier between Heusler alloy Co2MnSi and the germanium (Ge) channel modulates the Schottky barrier height and the resistance-area product of the spin diode. We confirm that the Fermi level is depinned and a reduction in the electron Schottky barrier height (SBH) occurs following the insertion of the graphene layer between Co2MnSi and Ge. The electron SBH is modulated in the 0.34 eV-0.61 eV range. Furthermore, the transport mechanism changes from rectifying to symmetric tunneling following the insertion. This behavior provides a pathway for highly efficient spin injection from a Heusler alloy into a Ge channel with high electron and hole mobility. Project supported by the National Natural Science Foundation of China (Grant No. 61504107) and the Fundamental Research Funds for the Central Universities, China (Grant Nos. 3102014JCQ01059 and 3102015ZY043).

  14. The oxidation behavior of classical thermal barrier coatings exposed to extreme temperature

    Directory of Open Access Journals (Sweden)

    Alina DRAGOMIRESCU

    2017-03-01

    Full Text Available Thermal barrier coatings (TBC are designed to protect metal surfaces from extreme temperatures and improve their resistance to oxidation during service. Currently, the most commonly used systems are those that have the TBC structure bond coat (BC / top coat (TC layers. The top coat layer is a ceramic layer. Oxidation tests are designed to identify the dynamics of the thermally oxide layer (TGO growth at the interface of bond coat / top coat layers, delamination mechanism and the TBC structural changes induced by thermal conditions. This paper is a short study on the evolution of aluminum oxide protective layer along with prolonged exposure to the testing temperature. There have been tested rectangular specimens of metal super alloy with four surfaces coated with a duplex thermal barrier coating system. The specimens were microscopically and EDAX analyzed before and after the tests. In order to determine the oxide type, the samples were analyzed using X-ray diffraction. The results of the investigation are encouraging for future studies. The results show a direct relationship between the development of the oxide layer and long exposure to the test temperature. Future research will focus on changing the testing temperature to compare the results.

  15. Identification of Key Barriers in Workforce Development

    Energy Technology Data Exchange (ETDEWEB)

    None

    2008-03-31

    This report documents the identification of key barriers in the development of an adequate national security workforce as part of the National Security Preparedness Project, being performed under a Department of Energy/National Nuclear Security Administration grant. Many barriers exist that prevent the development of an adequate number of propertly trained national security personnel. Some barriers can be eliminated in a short-term manner, whereas others will involve a long-term strategy that takes into account public policy.

  16. A study of the barrier properties of polyethylene coated with a nanocellulose/magnetite composite film

    Directory of Open Access Journals (Sweden)

    Đorđević Nenad

    2016-01-01

    Full Text Available The morphological, thermal and barrier properties of low-density polyethylene/polycaprolactone-modified nanocellulose hybrid materials were investigated in this paper. Nanonocelulose/magnetite (NC-Fe3O4 nanocomposite and maleic acid functionalized NC/magnetite (NCMA-Fe3O4 nanocomposite were prepared and used as filler at various concentrations (5, 10 and 15 wt. % in polycaprolactone (PCL layer. PE was coated with PCL/NC/magnetite layer. The addition of the filler did not unfavorably affect the inherent properties of the polymer, especially its barrier properties. Oxygen permeation measurements show that the oxygen barrier properties of magnetite enriched PCL film were improved due to chemical activity of added material. The highest level of barrier capacity was observed for PE samples coated with PCL based composite with NCMA-Fe3O4 micro/-nanofiller, which implies the significant contribution of nanocellulose surface modification with maleic anhydride residue to improved barrier properties. [Projekat Ministarstva nauke Republike Srbije, br. III45019 i br. OI172013

  17. Microbial products induce claudin-2 to compromise gut epithelial barrier function.

    Directory of Open Access Journals (Sweden)

    Xiaoyu Liu

    Full Text Available The epithelial barrier dysfunction is an important pathogenic feature in a number of diseases. The underlying mechanism is to be further investigated. The present study aims to investigate the role of tight junction protein claudin-2 (Cldn2 in the compromising epithelial barrier function. In this study, the expression of Cldn2 in the epithelial layer of mice and patients with food allergy was observed by immunohistochemistry. The induction of Cldn2 was carried out with a cell culture model. The Cldn2-facilitated antigen internalization was observed by confocal microscopy. The epithelial barrier function in the gut epithelial monolayer was assessed by recording the transepithelial resistance and assessing the permeability to a macromolecular tracer. The results showed that the positive immune staining of Cldn2 was observed in the epithelial layer of the small intestine that was weakly stained in naïve control mice, and strongly stained in sensitized mice as well as patients with food allergy. Exposure to cholera toxin or Staphylococcal enterotoxin B induced the expression of Cldn2 in HT-29 or T84 cells. Cldn2 could bind protein antigen to form complexes to facilitate the antigen transport across the epithelial barrier. Blocking Cldn2 prevented the allergen-related hypersensitivity the intestine. We conclude that the tight junction protein Cldn2 is involved in the epithelial barrier dysfunction.

  18. Altered permeability barrier structure in cholesteatoma matrix

    DEFF Research Database (Denmark)

    Svane-Knudsen, Viggo; Halkier-Sørensen, Lars; Rasmussen, Gurli

    2002-01-01

    The stratum corneum of the cholesteatoma epithelium comprises the greater part of the cholesteatoma matrix. The permeability barrier that militates against diffusion and penetration of infectious and toxic agents into and through the epithelium is situated here. The multiple long sheets of lamellar...... lipid structures filling the intercellular spaces mainly control the barrier function. The barrier in cholesteatoma epithelium is several times thicker than in unaffected skin but presents distinctive features of a defective barrier as seen in other scaling skin diseases. The intercellular spaces appear...

  19. Barriers Approach to Innovation in Academic Libraries

    Directory of Open Access Journals (Sweden)

    Fu-Hsuan Chuang

    2016-11-01

    Full Text Available Innovation in academic libraries is not a brand new issue. Academic libraries can benefit from successful innovation, since innovation is a key contributor to gaining and sustaining competitive advantage for survival. Building on two case studies, 28 participants from leadership teams to practitioners are involved, the qualitative findings identified the specific two types of barriers that academic libraries face by applying a barriers approach to innovation, that’s, environmental and organizational barriers. Especially, seven dimensions of two types of barriers to innovation are found.

  20. A microphysiological model of the human placental barrier.

    Science.gov (United States)

    Blundell, Cassidy; Tess, Emily R; Schanzer, Ariana S R; Coutifaris, Christos; Su, Emily J; Parry, Samuel; Huh, Dongeun

    2016-08-02

    During human pregnancy, the fetal circulation is separated from maternal blood in the placenta by two cell layers - the fetal capillary endothelium and placental trophoblast. This placental barrier plays an essential role in fetal development and health by tightly regulating the exchange of endogenous and exogenous materials between the mother and the fetus. Here we present a microengineered device that provides a novel platform to mimic the structural and functional complexity of this specialized tissue in vitro. Our model is created in a multilayered microfluidic system that enables co-culture of human trophoblast cells and human fetal endothelial cells in a physiologically relevant spatial arrangement to replicate the characteristic architecture of the human placental barrier. We have engineered this co-culture model to induce progressive fusion of trophoblast cells and to form a syncytialized epithelium that resembles the syncytiotrophoblast in vivo. Our system also allows the cultured trophoblasts to form dense microvilli under dynamic flow conditions and to reconstitute expression and physiological localization of membrane transport proteins, such as glucose transporters (GLUTs), critical to the barrier function of the placenta. To provide a proof-of-principle for using this microdevice to recapitulate native function of the placental barrier, we demonstrated physiological transport of glucose across the microengineered maternal-fetal interface. Importantly, the rate of maternal-to-fetal glucose transfer in this system closely approximated that measured in ex vivo perfused human placentas. Our "placenta-on-a-chip" platform represents an important advance in the development of new technologies to model and study the physiological complexity of the human placenta for a wide variety of applications.

  1. Phase-Change Optical Disk Having a Nitride Interface Layer

    Science.gov (United States)

    Yamada, Noboru; Otoba, Mayumi; Kawahara, Katsumi; Miyagawa, Naoyasu; Ohta, Hiroyuki; Akahira, Nobuo; Matsunaga, Toshiyuki

    1998-04-01

    A thin nitride layer formed at the interface of a Ge Sb Te recording layer and a ZnS SiO2 protective layer successfully suppresses the phenomenon that reflectivity or signal amplitude becomes markedly small due to repeated overwrites. Based on secondary ion mass spectrometry (SIMS) observations, the 5-nm-thick interface layer was found to restrain sulfur atoms in the ZnS SiO2 layer from diffusing into the Ge Sb Te layer and from changing the optical characteristics of the layer. Among several nitride materials, germanium nitride (Ge N) sputtered film is found to have the most suitable properties as an interface layer: high barrier effect and good adhesiveness with Ge Sb Te and ZnS SiO2 layers. The optical disk having the Ge N interface layer achieves more than 5×105 cycles of overwrites with almost no changes in signal amplitude, reflectivity and jitter based on DVD-RAM specifications. The disk shows no degradation such as cracking, peeling, and corrosion after exposure to accelerated environmental conditions of 90°C and 80% RH for 200 h.

  2. Transparent, Ultrahigh-Gas-Barrier Films with a Brick-Mortar-Sand Structure.

    Science.gov (United States)

    Dou, Yibo; Pan, Ting; Xu, Simin; Yan, Hong; Han, Jingbin; Wei, Min; Evans, David G; Duan, Xue

    2015-08-10

    Transparent and flexible gas-barrier materials have shown broad applications in electronics, food, and pharmaceutical preservation. Herein, we report ultrahigh-gas-barrier films with a brick-mortar-sand structure fabricated by layer-by-layer (LBL) assembly of XAl-layered double hydroxide (LDH, X=Mg, Ni, Zn, Co) nanoplatelets and polyacrylic acid (PAA) followed by CO2 infilling, denoted as (XAl-LDH/PAA)n-CO2. The near-perfectly parallel orientation of the LDH "brick" creates a long diffusion length to hinder the transmission of gas molecules in the PAA "mortar". Most significantly, both the experimental studies and theoretical simulations reveal that the chemically adsorbed CO2 acts like "sand" to fill the free volume at the organic-inorganic interface, which further depresses the diffusion of permeating gas. The strategy presented here provides a new insight into the perception of barrier mechanism, and the (XAl-LDH/PAA)n-CO2 film is among the best gas barrier films ever reported.

  3. Photochemical approach to high-barrier films for the encapsulation of flexible laminary electronic devices

    Energy Technology Data Exchange (ETDEWEB)

    Prager, L., E-mail: lutz.prager@iom-leipzig.de [Leibniz-Institut für Oberflächenmodifizierung e.V., Permoserstr. 15, 04318 Leipzig (Germany); Helmstedt, U. [Leibniz-Institut für Oberflächenmodifizierung e.V., Permoserstr. 15, 04318 Leipzig (Germany); Herrnberger, H. [Solarion AG, Pereser Höhe 1, Breitscheidstraße 45, 04442 Zwenkau (Germany); Kahle, O. [Fraunhofer-Einrichtung für Polymermaterialien und Composite PYCO, Kantstraße 55, 14513 Teltow (Germany); Kita, F. [AZ Electronic Materials Germany GmbH, Rheingaustraße 190-196, 65203 Wiesbaden (Germany); Münch, M. [Solarion AG, Pereser Höhe 1, Breitscheidstraße 45, 04442 Zwenkau (Germany); Pender, A.; Prager, A.; Gerlach, J.W. [Leibniz-Institut für Oberflächenmodifizierung e.V., Permoserstr. 15, 04318 Leipzig (Germany); Stasiak, M. [Fraunhofer-Einrichtung für Polymermaterialien und Composite PYCO, Kantstraße 55, 14513 Teltow (Germany)

    2014-11-03

    Based on results of preceding research and development, thin gas barriers were made by wet application of perhydropolysilazane solution onto polymer films and its subsequent photo-initiated conversion to dense silica layers applying vacuum ultraviolet irradiation. Compared to the state of the art, these layers were sufficiently improved and characterized by spectroscopic methods, by scanning electron microscopy and by gas permeation measurements. Water vapor transmission rates (WVTR) below 10{sup −2} g m{sup −2} d{sup −1} were achieved. In this way, single barrier films were developed and produced on a pilot plant from roll to roll, 250 mm wide, at speeds up to 10 m min{sup −1}. Two films were laminated using adhesives curable with ultraviolet (UV) light and evaluated by peel tests, gas permeation measurement and climate testing. It could be shown that the described high-barrier laminates which exhibit WVTR ≈ 5 × 10{sup −4} g m{sup −2} d{sup −1}, determined by the calcium mirror method, are suitable for encapsulation of flexible thin-film photovoltaic modules. Durability of the encapsulated modules could be verified in several climate tests including damp-heat, thermo-cycle (heating, freezing, wetting) and UV exposures which are equivalent to more than 20 years of endurance at outdoor conditions in temperate climate. In the frame of further research and technical development it seems to be possible to design a cost efficient industrial scale process for the production of encapsulation films for photovoltaic applications. - Highlights: • Dense silica barrier layers were developed by a photochemical approach. • Polymer based barrier films were laminated yielding flexible high-barrier films. • Using these laminates photovoltaic test modules were encapsulated and tested. • A durability of more than 20 years at outdoor conditions could be proved.

  4. Religious culture as a barrier?

    DEFF Research Database (Denmark)

    Agergaard, Sine

    2016-01-01

    Political interventions, media coverage and research often refer to the underrepresentation of ethnic minorities, particularly girls and women, participating in physical activity and organised sports. In both public and academic debates, reference is made to the religious culture as a particular...... barrier to participation in sports among Muslim girls and women. This article aims to provide a counter-narrative by focusing on young Muslim girls who simultaneously practice their religion and sports. The main research question was: How do young Danish Muslim girls align participation in sports...... religion as hegemonic, embodied and dynamic cultural phenomena, the analysis points to the diversity through which Muslim girls and women participate and engage in sports. Finally, the article discusses the extent to which counter-narratives may contribute to changing perspectives on so-called hard...

  5. Effect of dielectric barrier on rectification, injection and transport properties of printed organic diodes

    Science.gov (United States)

    Lilja, K. E.; Majumdar, H. S.; Lahtonen, K.; Heljo, P.; Tuukkanen, S.; Joutsenoja, T.; Valden, M.; Österbacka, R.; Lupo, D.

    2011-07-01

    Rectification ratios of 105 were observed in printed organic copper/polytriarylamine (PTAA)/silver diodes with a thin insulating barrier layer at the copper/PTAA interface. To clarify the origin of the high rectification ratio in the diodes, the injection, transport and structure of the diodes with two different copper cathodes were examined using impedance spectroscopy and x-ray photoelectron spectroscopy (XPS). The impedance data confirm that the difference in diode performance arises from the copper/PTAA interface. The XPS measurements show that the copper surface in both diode structures is covered by a layer of Cu2O topped by an organic layer. The organic layer is thicker on one of the surfaces, which results in lower reverse currents and higher rectification ratios in the printed diodes. We suggest a model where a dipole at the dual insulating layer induces a shift in the semiconductor energy levels explaining the difference between the diodes with different cathodes.

  6. Piezoelectric Resonator with Two Layers

    Science.gov (United States)

    Stephanou, Philip J. (Inventor); Black, Justin P. (Inventor)

    2013-01-01

    A piezoelectric resonator device includes: a top electrode layer with a patterned structure, a top piezoelectric layer adjacent to the top layer, a middle metal layer adjacent to the top piezoelectric layer opposite the top layer, a bottom piezoelectric layer adjacent to the middle layer opposite the top piezoelectric layer, and a bottom electrode layer with a patterned structure and adjacent to the bottom piezoelectric layer opposite the middle layer. The top layer includes a first plurality of electrodes inter-digitated with a second plurality of electrodes. A first one of the electrodes in the top layer and a first one of the electrodes in the bottom layer are coupled to a first contact, and a second one of the electrodes in the top layer and a second one of the electrodes in the bottom layer are coupled to a second contact.

  7. Evidence of a Symmetry-Dependent Metallic Barrier in Fully Epitaxial MgO Based Magnetic Tunnel Junctions

    Science.gov (United States)

    Greullet, F.; Tiusan, C.; Montaigne, F.; Hehn, M.; Halley, D.; Bengone, O.; Bowen, M.; Weber, W.

    2007-11-01

    We report on the experimental observation of tunneling across an ultrathin metallic Cr spacer layer that is inserted at the interface of a Fe/MgO/Fe(001) junction. We show how this remarkable behavior in a solid-state device reflects a quenching in the transmission of particular electronic states, as expected from the symmetry-filtering properties of the MgO barrier and the band structure of the bcc Cr(001) spacer in the epitaxial junction stack. This ultrathin Cr metallic barrier can promote quantum well states in an adjacent Fe layer.

  8. Particle-in-cell modeling of gas-confined barrier discharge

    Science.gov (United States)

    Levko, Dmitry; Raja, Laxminarayan L.

    2016-04-01

    Gas-confined barrier discharge is studied using the one-dimensional Particle-in-Cell Monte Carlo Collisions model for the conditions reported by Guerra-Garcia and Martinez-Sanchez [Appl. Phys. Lett. 106, 041601 (2015)]. Depending on the applied voltage, two modes of discharge are observed. In the first mode, the discharge develops in the entire interelectrode gap. In the second mode, the discharge is ignited and develops only in the gas layer having smaller breakdown voltage. The one-dimensional model shows that for the conditions considered, there is no streamer stage of breakdown as is typical for a traditional dielectric barrier discharge.

  9. Barrier Formation on a YBa2Cu3Oy Thin Film Using CF4 Plasma Fluorination

    Institute of Scientific and Technical Information of China (English)

    阿巴斯; 康琳; 许伟伟; 杨森祖; 吴培亨

    2002-01-01

    We investigate the surface structure and composition ofa YBa2Cu3Oy (YBCO) thin film modified by CF4 plasma fluorination. In addition to the absorption of hydrocarbons, chemical reactions of the YBCO surface take place during CF4 plasma treatment. Various x-ray photoelectron spectroscopic data are reported and discussed. The existence of a thin barrier is confirmed, which homogeneously covers the edge of the base YBCO film in our interface engineering Josephson junction. Measurements of Auger electron spectroscopic data and the resistance versus temperature indicate that the barrier is a controllable-insulating layer.

  10. Glycoprotein mucin molecular brush on cancer cell surface acting as mechanical barrier against drug delivery

    Science.gov (United States)

    Wang, Xin; Shah, Aalok A.; Campbell, Robert B.; Wan, Kai-tak

    2010-12-01

    Uptake of cytotoxic drugs by typical tumor cells is limited by the dense dendritic network of oligosaccharide mucin chains that forms a mechanical barrier. Atomic force microscopy is used to directly measure the force needed to pierce the mucin layer to reach the cell surface. Measurements are analyzed by de Gennes' steric reptation theory. Multidrug resistant ovarian tumor cells shows significantly larger penetration load compared to the wide type. A pool of pancreatic, lung, colorectal, and breast cells are also characterized. The chemotherapeutic agent, benzyl-α-GalNac, for inhibiting glycosylation is shown to be effective in reducing the mechanical barrier.

  11. 200-BP-1 Prototype Hanford Barrier -- 15 Years of Performance Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Ward, Anderson L.; Draper, Kathryn E.; Link, Steven O.; Clayton, Ray E.

    2011-09-30

    Monitoring is an essential component of engineered barrier system design and operation. A composite capacitive cover, including a capillary break and an evapotranspiration (ET) barrier at the Hanford Site, is generating data that can be used to help resolve these issues. The prototype Hanford barrier was constructed over the 216-B-57 Crib in 1994 to evaluate surface-barrier constructability, construction costs, and physical and hydrologic performance at the field scale. The barrier has been routinely monitored between November 1994 and September 1998 as part of a Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) treatability test of barrier performance for the 200 BP 1 Operable Unit. Since FY 1998, monitoring has focused on a more limited set of key water balance, stability, and biotic parameters. In FY 2009, data collection was focused on: (1) water-balance monitoring, consisting of precipitation, runoff, soil moisture storage, and drainage measurements with evapotranspiration calculated by difference; (2) stability monitoring, consisting of asphalt-layer-settlement, basalt-side-slope-stability, and surface-elevation measurements; (3) vegetation dynamics; and (4) animal use. September 2009 marked 15 years since the start of monitoring and the collection of performance data. This report describes the results of monitoring activities during the period October 1, 2008, through September 30, 2009, and summarizes the 15 years of performance data collected from September 1994 through September 2009.

  12. Building biomedical materials layer-by-layer

    Directory of Open Access Journals (Sweden)

    Paula T. Hammond

    2012-05-01

    Full Text Available In this materials perspective, the promise of water based layer-by-layer (LbL assembly as a means of generating drug-releasing surfaces for biomedical applications, from small molecule therapeutics to biologic drugs and nucleic acids, is examined. Specific advantages of the use of LbL assembly versus traditional polymeric blend encapsulation are discussed. Examples are provided to present potential new directions. Translational opportunities are discussed to examine the impact and potential for true biomedical translation using rapid assembly methods, and applications are discussed with high need and medical return.

  13. Feasibility study of tungsten as a diffusion barrier between nickel-chromium-aluminum and Gamma/Gamma prime - Delta eutectic alloys

    Science.gov (United States)

    Young, S. G.; Zellars, G. R.

    1978-01-01

    Coating systems proposed for potential use on eutectic alloy components in high-temperature gas turbine engines were studied with emphasis on deterioration of such systems by diffusion. A 1-mil thick W sheet was placed between eutectic alloys and a NiCrAl layer. Layered test specimens were aged at 1100 C for as long as long as 500 hours. Without the W barrier, the delta phase of the eutectic deteriorated by diffusion of Nb into the NiCrAl. Insertion of the W barrier stopped the diffusion of Nb from delta. Chromium diffusion from the NiCrAl into the gamma/gamma prime phase of the eutectic was greatly reduced by the barrier. However, the barrier thickness decreased with time; and W diffused into both the NiCrAl and the eutectic. When the delta platelets were alined parallel to the NiCrAl layer, rather than perpendicular, diffusion into the eutectic was reduced.

  14. Multi-layers castings

    Directory of Open Access Journals (Sweden)

    J. Szajnar

    2010-01-01

    Full Text Available In paper is presented the possibility of making of multi-layers cast steel castings in result of connection of casting and welding coating technologies. First layer was composite surface layer on the basis of Fe-Cr-C alloy, which was put directly in founding process of cast carbon steel 200–450 with use of preparation of mould cavity method. Second layer were padding welds, which were put with use of TIG – Tungsten Inert Gas surfacing by welding technology with filler on Ni matrix, Ni and Co matrix with wolfram carbides WC and on the basis on Fe-Cr-C alloy, which has the same chemical composition with alloy, which was used for making of composite surface layer. Usability for industrial applications of surface layers of castings were estimated by criterion of hardness and abrasive wear resistance of type metal-mineral.

  15. Crash barrier research in the Netherlands.

    NARCIS (Netherlands)

    Flury, F.C. & Paar, H.G.

    1973-01-01

    Research by the SWOV has led to the development of a series of crash barriers of basically the same design but with varying degrees of resistance to lateral deflection. Requirements to which in general a crash barrier should fulfill are presented.

  16. Message maps for Safety Barrier Awareness

    DEFF Research Database (Denmark)

    All people are exposed to risks in every-day life, but they seldom experience accidents. Therefore people often believe that these accidents will never happen, and they will see the risks no more. By increasing the ability to notice risks, to see safety barriers, and to assess the safety barriers...

  17. Assessment of blood-retinal barrier integrity.

    Science.gov (United States)

    Vinores, S A

    1995-01-01

    The blood-retinal barrier consists of two components which are comprised of the retinal vascular endothelium and the retinal pigment epithelium, respectively. Its functional integrity can be recognized by tight junctions between these cells with a paucity of endocytic vesicles within them and the presence of the molecules that regulate the ionic and metabolic gradients that constitute the barrier. The barrier is compromised in several disease processes and by a variety of agents, but in most cases the location and mechanism for barrier failure is not understood. Perfusion with a variety of radiolabeled tracer molecules, vitreous fluorophotometry, or magnetic resonance imaging can be used to quantitate blood-retinal barrier leakage. Fluorescein angiography or magnetic resonance imaging can localize sites of leakage in vivo with limited resolution. Evans blue dye can be used to visualize blood-retinal barrier failure in gross pathological specimens and immuno-histochemical labeling of serum proteins such as albumin or fibrinogen can be used to localize sites of blood-retinal barrier breakdown by light microscopy. Tracers such as horseradish peroxidase, microperoxidase, or lanthanum, or the immunocytochemical demonstration of albumin can be used to reveal blood-retinal barrier breakdown at the ultrastructural level and provide insights into the mechanisms involved. This review discusses the advantages and limitations of each of these methods to aid in selection of the appropriate techniques to derive the desired information.

  18. Barriers to adherence in cystic fibrosis

    DEFF Research Database (Denmark)

    Bregnballe, Vibeke; Schiøtz, Peter Oluf

    2012-01-01

    Danish patients with cystic fibrosis aged 14 to 25 years and their parents. Conclusions: The present study showed that the majority of adolescents with CF and their parents experienced barriers to treatment adherence. Patients and parents agreed that the three most common barriers encountered lack...

  19. Storm impacts on small barrier islands

    DEFF Research Database (Denmark)

    Kroon, Aart; Fruergaard, Mikkel

    The shorelines of the Baltic Sea and the inner coastal waters in Denmark consist of many barrier islands. These sandy barrier islands were mainly formed in the Holocene and are still very dynamic. The present day changes in the morphology are dominantly governed by storm waves and associated high...

  20. Nurses' barriers to learning: an integrative review.

    Science.gov (United States)

    Santos, Marion C

    2012-07-01

    This integrative review of the literature describes nurses' barriers to learning. Five major themes emerged: time constraints, financial constraints, workplace culture, access/relevance, and competency in accessing electronic evidence-based practice literature. The nurse educator must address these barriers for the staff to achieve learning and competency.