WorldWideScience

Sample records for cernavoda npp site

  1. The International Cooperation and Partnership, Keystones for Engineering and Procurement for Cernavoda NPP Unit 2

    Energy Technology Data Exchange (ETDEWEB)

    Stiopol, Mihaela; Vatamanu, Mariana; Bucur, Cristina [Nuclearelectrica SA, 65 Polona Street, 010494 Bucharest (Romania)

    2008-07-01

    protection and industrial safety achievements. According to the contract signed in May 2001, between SNN S.A. and AECL and ANSALDO, a 'Management Team', formed by representatives and specialists from Canada - AECL, Italy - ANSALDO and Romania - 'Nuclearelectrica' was in charge of the engineering, procurement, construction and commissioning processes for Cernavoda NPP Unit 2. More than 1600 workers were employed by 'Management Team' of which 110 are AECL experts from Canada, 80 ANSALDO employees from Italy and 700 are 'Nuclearelectrica' permanent employees. A similar organization was applied successfully in Unit 1 Project. After the turnover of Unit 2 from 'Management Team' to 'Nuclearelectrica', in 2007, the U2 operation was integrated into a 'Two-Units' organization (together with U1). The present paper will present the prerequisites of the successful operation of Unit 1, and will develop the main steps in the Cernavoda NPP-Unit 2 completion process as well as the corporate organization in the view of an integrated two units structure on Cernavoda site. (authors)

  2. The Use of Tritiated Wastewater from NPP Cernavoda in Agigea Black Sea Area

    Science.gov (United States)

    Varlam, C.; Stefanescu, I.; Faurescu, I.; Vagner, I.; Dobrinescu, D.

    2009-04-01

    Danube-Black Sea Channel is situated in the south east part of Romania. It takes its waters from Danube upstream of Cernavoda town, and flows into the Black Sea at Agigea. The main uses of the channel are numerous, but it can be mentioned navigation and nuclear power generation - Cernavoda Nuclear Power Plant. Maximum weigh carrying of the canal is 70 million t/year. Agigea is the most important harbor of the Channel and due to intensive activity the accidents can happened any time. In this study we propose to use tritiated liquid effluents from CANDU type NPP Cernavoda as a tracer, to study dilution factor between fresh water of the canal and the Black Sea waters. Tritiated water can be used to simulate the transport and dispersion of solutes in Danube-Black Sea Channel because they have the same physical characteristics as water. Measured tracer-response curves produced from injection of a known quantity of soluble tracer provide an efficient method of obtaining necessary data. We established tritium level in monitored zone Agigea-Black Sea by monthly samples and precipitation during may 2005- may 2006. The average tritium concentration for Black Sea near Agigea location was 12.5 +/- 2.2 TU. During the NPP evacuation we establish inside Agigea canal lock a well mixed tritium concentration of 174.07 +/- 6.2 TU. Using waters lock as a tracer we establish dilution factor of 1: 4.28 inside Agigea harbor, and dilution factor of 1:2.17 in open sea. This experimental parameter can be used in dispersion simulation for Agigea - Black Sea area.

  3. The status of nuclear waste from NPP in Romania

    Energy Technology Data Exchange (ETDEWEB)

    Mauna, T. [Romanian Nuclear Energy Association Council, Asociatia Romana Energia Nucleara AREN, Bucharest (Romania)]. E-mail: tmauna@nuclearelectrica.ro

    2006-07-01

    AREN founded in 1990 is a Romanian NGO focused to sustain its employees or corporate members to develop all kinds of nuclear activities in connection with environmental protection as a scientific organization, having as the first objective activities with respect to Cernavoda NPP. As the only CANDU type reactor equipped Nuclear Power Plant (NPP) in Europe, we pay very much attention to all aspects regarding implementation of this concept in our country and the consequences of this implementation. From July 1996 the first unit in operation supplied into the grid around 40 TWh electric power and around 400 Tcal of thermal power for district heating until September 2004. The second unit is still under construction managed also by the Canadian project team, having a finalization target year of 2007. The temporary LILW, and spent fuel dry storage facilities are also on Cernavoda NPP site inside the safety exclusion area boundary of the first unit. The capacity of temporary LILW warehouse concrete building, practically located into the security plant fence, is around 2,400 m{sup 3}. T he occupied capacity is estimated as 140 m{sup 3} until the end of 2004. The spent fuel dry storage MACSTOR type (a Canadian solution for spent fuel storage) with about 12,000 spent fuel bundles capacity is in operation on Cernavoda NPP site, since May 2003. Nuclearelectrica as the owner implemented all the projects based on the licenses and permits granted by the National Commission for Nuclear Activities Control (CNCAN) for each step: the sitting, construction, commissioning and operation. According to the specific Romanian regulations, every project on the site, like the interim dry storage facility, was also subject to the licensing process by the Environmental and Public Health authorities. The public acceptance has been an important step of the licensing procedure. Cernavoda NPP used different legal procedures for public debate including announcements in local and national newspapers

  4. Hydrodynamic model of Fukushima-Daiichi NPP Industrial site flooding

    CERN Document Server

    Vaschenko, V N; Gerasimenko, T V; Vachev, B

    2014-01-01

    While the Fukushima-Daiichi was designed and constructed the maximal tsunami height estimate was about 3 m based on analysis of statistical data including Chile earthquake in 1960. The NPP project industrial site height was 10 m. The further deterministic estimates TPCO-JSCE confirmed the impossibility of the industrial site flooding by a tsunami and therefore confirmed ecological safety of the NPP. However, as a result of beyond design earthquake of 11 March 2011 the tsunami height at the shore near the Fukushima-Daiichi NPP reached 15 m. This led to flooding and severe emergencies having catastrophic environmental consequences. This paper proposes hydrodynamic model of tsunami emerging and traveling based on conservative assumptions. The possibility of a tsunami wave reaching 15 m height at the Fukushima-Daiichi NPP shore was confirmed for deduced hydrodynamic resistance coefficient of 1.8. According to the model developed a possibility of flooding is determined not only by the industrial site height, magni...

  5. Construction prospects of new power units at Khmelnitskij NPP site

    Energy Technology Data Exchange (ETDEWEB)

    Zenyuk, Denys [NNEGC ' Energoatom' , 01032 Vetrova, 3, Kiev (Ukraine)

    2008-07-01

    According to the Energy Strategy of Ukraine for a period up to 2030 it is planned to put into operation power units 3 and 4 of Khmelnitskij NPP by year 2016. In this work considerations are presented on the possible options while selecting reactor unit type for Khmelnitskij NPP power units 3 and 4, which is the main determinant of the cost, construction and commissioning time, and utilization of the existent civil structures. To optimize Khmelnitskij-3 and 4 construction, a survey of the data has been conducted with regard to the possibility of construction of new power units of PWR/VVER type at Khmelnitskij NPP site. The multivariable analysis has been performed based on the projects technical and cost data, construction time and conditions, as well as their compliance with the IAEA and EUR safety requirements for new power units. (author)

  6. Seismic site evaluation practice and seismic design guide for NPP in Continent of China

    Energy Technology Data Exchange (ETDEWEB)

    Hu Yuxian [State Seismological Bureau, Beijing, BJ (China). Inst. of Geophysics

    1997-03-01

    Energy resources, seismicity, NPP and related regulations of the Continent of China are briefly introduced in the beginning and two codes related to the seismic design of NPP, one on siting and another on design, are discussed in some detail. The one on siting is an official code of the State Seismological Bureau, which specifies the seismic safety evaluation requirements of various kinds of structures, from the most critic and important structures such as NPP to ordinary buildings, and including also engineering works in big cities. The one on seismic design of NPP is a draft subjected to publication now, which will be an official national code. The first one is somewhat unique but the second one is quite similar to those in the world. (author)

  7. Strategic maintenance plan for Cernavoda steam generators

    Energy Technology Data Exchange (ETDEWEB)

    Cicerone, T. [CNE-PROD, Cernavoda (Romania); Dhar, D.; VandenBerg, J.P. [Babcock and Wilcox (Canada)

    2002-07-01

    Steam generators are among the most important pieces of equipment in a nuclear power plant. They are required full time during the plant operation and obviously no redundancy exists. Past experience has shown that those utilities which implemented comprehensive steam generator inspection and maintenance programs and strict water chemistry controls, have had good steam generator performance that supports good overall plant performance. The purpose of this paper is to discuss a strategic Life Management and Operational-monitoring program for the Cernavoda steam generators. The program is first of all to develop a base of expertise for the management of the steam generator condition; and that is to be supported by a program of actions to be accomplished over time to assess their condition, to take measures to avoid degradation and to provide for inspections, cleaning and modifications as necessary. (author)

  8. Treatment, conditioning and packaging for final disposal of low and intermediate level waste from Cernavoda: a techno-economic assessment

    Energy Technology Data Exchange (ETDEWEB)

    Suryanarayan, S.; Husain, A. [Kinectrics Inc., Toronto, ON (Canada); Fellingham, L.; Nesbitt, V. [Nuvia Ltd., Didcot, Oxfordshire (United Kingdom); Toro, L. [Mate-fin, Bucharest (Romania); Simionov, V.; Dumitrescu, D. [Cernavoda Nuclear Power Plant, Cernavoda (Romania)

    2011-07-01

    National Nuclearelectrica Society (SNN) owns and operates two CANDU-6 plants at Cernavoda in Romania. Two additional units are expected to be built on the site in the future. Low and intermediate level short-lived radioactive wastes from Cernavoda are planned to be disposed off in a near-surface repository to be built at Saligny. The principal waste streams are IX resins, filters, compactable wastes, non-compactables, organic liquids and oil-solid mixtures. Their volumetric generation rates per reactor unit are estimated to be: IX resins (6 m{sup 3}/y), filters (2 m{sup 3}/y), compactables (23 m{sup 3}/y) and non-compactables (15 m{sup 3}/y). A techno-economic assessment of the available options for a facility to treat and condition Cernavoda's wastes for disposal was carried out in 2009 based on projected waste volumes from all four units. A large number of processes were first screened to identify viable options. They were further considered to develop overall processing options for each waste stream. These were then consolidated to obtain options for the entire plant by minimizing the number of unit operations required to process the various waste streams. A total of 9 plant options were developed for which detailed costing was undertaken. Based on a techno-economic assessment, two top ranking plant options were identified. Several scenarios were considered for implementing these options. Amongst them, a contractor run operation of a facility located on the Cernavoda site was considered to be more cost effective than operating the facility using SNN personnel. (author)

  9. Selection Methodology Approach to Preferable and Alternative Sites for the First NPP Project in Yemen

    Energy Technology Data Exchange (ETDEWEB)

    Kassim, Moath [Kyunghe Univ., Yongin (Korea, Republic of); Kessel, David S. [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-05-15

    The purpose of this paper is to briefly present the methodology and results of the first siting study for the first nuclear power plant (NPP) in Yemen. In this study it has been demonstrated that there are suitable sites for specific unit/units power of 1000 MWt (about 300 MWe) nuclear power plant. To perform the site selection, a systematic selection method was developed. The method uses site-specific data gathered by literature review and expert judgement to identify the most important site selection criteria. A two-step site selection process was used. Candidate sites were chosen that meet a subset of the selection criteria that form the most important system constraints. These candidate sites were then evaluated against the full set of selection criteria using the Analytical Hierarchy Process Method (AHP). Candidate sites underwent a set of more specific siting criteria weighted by expert judgment to select preferable sites and alternatives using AHP method again. Expert Judgment method was used to rank and weight the importance of each criteria, then AHP method used to evaluate and weight the relation between criterion to criterion and between all criteria against the global weight. Then logical decision software was used to rank sites upon their weighting value.

  10. Radionuclide Distribution in the Soil on the Stabatishkes Site in the Vicinity of the Ignalina NPP

    Directory of Open Access Journals (Sweden)

    Jevgenij Aliončik

    2011-02-01

    Full Text Available A near surface repository for low and intermediate-level short-lived radioactive waste will be built on the Stabatiškės site in the vicinity of Ignalina NPP during decommissioning works. The reservoir can also be used for the waste stored in the temporary repositories of the Ignalina NPP. Engineering and nature protective barriers are used in the repository for radioactive waste, however, radionuclides can spread into the environment, extend in the biosphere and cause (define the external power light exposure of the environment due to the natural and premature (prescheduled degradation of the engineering barriers of the repository. The properties of the soil (acidity, quantity of organic substances, humidity are being investigated for estimating the possible migration and dispersion of radionuclides. The activity of radionuclides in the soil is also estimated before building the repository. Natural and artificial radionuclides make the pollution of the soil, and therefore the accumulation and vertical migration of artificial (137Cs, 60Co and natural (226Ra, 232Th, 40K radionuclides are being researched in the soil on the Stabatiškės site.Article in Lithuanian

  11. Development of Rainfall-Discharge Model for Future NPP candidate Site

    Energy Technology Data Exchange (ETDEWEB)

    An, Ji-hong; Yee, Eric [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-10-15

    By this study, most suitable model for future nuclear power plant site in Yeongdeok to be used to predict peak amount of riverine flooding was developed by examining historical rainfall and discharge data from the nearest gage station which is Jodong water level gage station in Taehwa basin. Sitting a nuclear power plant (NPP) requires safety analyses that include the effects of extreme events such as flooding or earthquake. In light of South Korean government's 15-year power supply plan that calls for the construction of new nuclear power station in Yeongdeok, it becomes more important to site new station in a safe area from flooding. Because flooding or flooding related accidents mostly happen due to extremely intense rainfall, it is necessary to find out the relationship between rainfall and run-off by setting up feasible model to figure out the peak flow of the river around nuclear related facilities.

  12. Regression tree modeling of forest NPP using site conditions and climate variables across eastern USA

    Science.gov (United States)

    Kwon, Y.

    2013-12-01

    As evidence of global warming continue to increase, being able to predict forest response to climate changes, such as expected rise of temperature and precipitation, will be vital for maintaining the sustainability and productivity of forests. To map forest species redistribution by climate change scenario has been successful, however, most species redistribution maps lack mechanistic understanding to explain why trees grow under the novel conditions of chaining climate. Distributional map is only capable of predicting under the equilibrium assumption that the communities would exist following a prolonged period under the new climate. In this context, forest NPP as a surrogate for growth rate, the most important facet that determines stand dynamics, can lead to valid prediction on the transition stage to new vegetation-climate equilibrium as it represents changes in structure of forest reflecting site conditions and climate factors. The objective of this study is to develop forest growth map using regression tree analysis by extracting large-scale non-linear structures from both field-based FIA and remotely sensed MODIS data set. The major issue addressed in this approach is non-linear spatial patterns of forest attributes. Forest inventory data showed complex spatial patterns that reflect environmental states and processes that originate at different spatial scales. At broad scales, non-linear spatial trends in forest attributes and mixture of continuous and discrete types of environmental variables make traditional statistical (multivariate regression) and geostatistical (kriging) models inefficient. It calls into question some traditional underlying assumptions of spatial trends that uncritically accepted in forest data. To solve the controversy surrounding the suitability of forest data, regression tree analysis are performed using Software See5 and Cubist. Four publicly available data sets were obtained: First, field-based Forest Inventory and Analysis (USDA

  13. Engineering geological and hydrogeological invstigations for storage of medium and low-activity nuclear waste at Cernavoda, Romania. Soil stabilisation using the CONSOLID system; Ingenieurgeologische und hydrogeologische Untersuchungen zur Lagerung mittel- und schwachradioaktiver Abfaelle in Cernavoda Rumaenien. Baugrundstabilisierung mit dem CONSOLID-System

    Energy Technology Data Exchange (ETDEWEB)

    Giurgea, V.; Merkler, G.P.; Hoetzl, H.; Hannich, D. [Karlsruhe Univ. (T.H.) (Germany). Lehrstuhl fuer Angewandte Geologie

    1998-12-31

    In Cernavoda/Romania investigations and planning from a low and middle radioactive waste disposal site have been carried out. A multitude of hydrogeological, geological, engineering geological criteria`s and constructional security measures were examined with respect to the strict regulations for such a waste site. This studies and measures are shortly analyzed and discussed in this paper. In accordance with the selection criteria for such a hazardous waste site, several laboratory and `in situ` tests, soil-mechanic studies, numerical modeling and foundation tests for soil stabilization with the CONSOLID-System are presented. (orig.) [Deutsch] Zur Einhaltung der strengen Vorgaben, die bei einem Deponiestandort fuer mittel- und schwachradioaktive Abfaelle gestellt werden, sind in Cernavoda/Rumaenien eine Vielzahl von hydrogeologischen und ingenieurgeologischen Untersuchungen sowie bautechnischen Sicherungsmassnahmen vorgesehen, die im Rahmen dieser Publikation kurz analysiert und diskutiert werden. Im Zusammenhang mit den geologischen und hydrogeologischen Auswahlkriterien des Standortes werden eine Reihe von Labor- und `in situ` Untersuchungen, Modellrechnungen sowie Baugrundstabilisierungsmassnahmen mit dem CONSOLID-System vorgestellt. (orig.)

  14. Beyond designed functional margins in CANDU type NPP. Radioactive nuclei assessment in an LOCA type accident

    Directory of Open Access Journals (Sweden)

    Budu Andrei Razvan

    2015-01-01

    Full Text Available European Union's energy roadmap up to year 2050 states that in order to have an efficient and sustainable economy, with minimum or decreasing greenhouse gas emissions, along with use of renewable resources, each constituent state has the option for nuclear energy production as one desirable option. Every scenario considered for tackling climate change issues, along with security of supply positions the nuclear energy as a recommended option, an option that is highly competitive with respect to others. Nuclear energy, along with other renewable power sources are considered to be the main pillars in the energy sector for greenhouse gas emission mitigation at European level. European Union considers that nuclear energy must be treated as a highly recommended option since it can contribute to security of energy supply. Romania showed excellent track-records in operating in a safe and economically sound manner of Cernavoda NPP Units 1&2. Both Units are in top 10 worldwide in terms of capacity factor. Due to Romania's need to ensure the security of electricity supply, to meet the environmental targets and to move to low carbon generation technologies, Cernavoda Units 3&4 Project appears as a must. This Project was started in 2010 and it is expected to have the Units running by 2025. Cost effective and safety operation of a Nuclear Power Plant is made taking into consideration functional limits of its equipment. As common practice, every nuclear reactor type (technology used is tested according to the worse credible accident or equipment failure that can occur. For CANDU type reactor, this is a Loss of Cooling Accident (LOCA. In a LOCA type accident in a CANDU NPP, using RELAP/SCDAP code for fuel bundle damage assessment the radioactive nuclei are to be quantified. Recently, CANDU type NPP accidents are studied using the RELAP/SCDAP code only. The code formerly developed for PWR type reactors was adapted for the CANDU geometry and can assess the

  15. The experience in the Cernavoda Unit 1 operation - a stimulating argument for future nuclear power development in Romania

    Energy Technology Data Exchange (ETDEWEB)

    Rotaru, I. [S.N. Nuclearelectrica, S.A., Romanian Nuclear Power Company (Romania); Bucur, I. [CNE - PROD, Cernavoda Unit 1 (Romania); Galeriu, A.C. [FCN, Pitesti, Nuclear Fuel Plant (Romania); Budan, O. [S.N. Nuclearelectrica, S.A., Romanian Nuclear Power Company (Romania)

    1999-07-01

    The Romanian nuclear program has been developed based on the option for CANDU type reactors. At the beginning, this program was unrealistically conceived and its management was inappropriate. The program was reconsidered in 1990 and the management policy and organization structure were also adapted accordingly. The paper presents, in the first part, the actual organization structure, adapted for the execution of the current and future activities, related to the nuclear power program. The performance achieved by Cernavoda Unit 1 constitutes the main part of the paper. The performances described demonstrate that the Cernavoda Unit 1 is a success and the Romania's electricity needs are satisfied in a proportion of about 12% by the nuclear power. The paper also presents a general view on Cernavoda Unit 2 perspectives. The essential conclusion of the paper is that the continuation of the nuclear program appears to be a logical option, generally accepted in Romania, limited only by financial restraints. (author)

  16. Resuspension of deposited radioactive material from the Fukushima Daiichi NPP site

    Science.gov (United States)

    Steinhauser, Georg; Niisoe, Tamon; Harada, Kouji H.; Shozugawa, Katsumi; Schneider, Stephanie; Synal, Hans-Arno; Walther, Clemens; Christl, Marcus; Nanba, Kenji; Ishikawa, Hirohiko; Koizumi, Akio

    2016-04-01

    Releases of radionuclides from the Fukushima nuclear accident are typically associated with the atmospheric discharges in the early phase of the accident in spring 2011. Analysis of weekly air filters, however, has revealed sporadic releases of radionuclides long after the Fukushima Daiichi reactors were stabilized. One major discharge was observed in August 2013 in monitoring stations in the Minamisoma area north of the Fukushima Daiichi nuclear power plant (FDNPP). During this event, an air monitoring station in this previously scarcely contaminated area suddenly reported 137Cs activity levels that were 30-fold above the background. Together with atmospheric dispersion and deposition simulation, radionuclide analysis in soil indicated that debris removal operations conducted on the FDNPP site on August 19, 2013 are likely to be responsible for this late release of radionuclides. One soil sample in the center of the simulated plume exhibited a high 90Sr contamination (78 ± 8 Bq kg-1) as well as a high 90Sr/137Cs ratio (0.04); both phenomena have usually been observed only in very close vicinity around the FDNPP. We estimate that through the resuspension of highly contaminated particles in the course of these earthmoving operations, gross 137Cs activity of ca. 2.8 × 1011 Bq has been released.

  17. Measurement of long-lived radionuclides in surface soil around F1NPP accident site by Accelerator Mass Spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Miyake, Yasuto; Matsuzaki, Hiroyuki [Department of Nuclear Engineering and Management, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo (Japan); Sasa, Kimikazu; Takahashi, Tsutomu [AMS Group, Tandem Accelerator Complex, Research Facility Center for Science and Technology, University of Tsukuba, Tsukuba, Ibaraki 305-8577 (Japan)

    2015-10-15

    In March 2011, vast amounts of radionuclides were released into the environment due to the Fukushima Daiichi Nuclear Power Plant (F1NPP) accident. However, very little work has been done concerning accident-derived long-lived nuclides such as {sup 129}I (T{sub 1/2} = 1.57 × 10{sup 7} year) and {sup 36}Cl (T{sub 1/2} = 3.01 × 10{sup 5} year). {sup 129}I and {sup 131}I are both produced by {sup 235}U fission in nuclear reactors. Being isotopes of iodine, these nuclides are expected to behave similarly in the environment. This makes {sup 129}I useful for retrospective reconstruction of {sup 131}I distribution during the initial stages of the accident. On the other hand, {sup 36}Cl is generated during reactor operation via neutron capture reaction of {sup 35}Cl, an impurity in the coolant or reactor component. Resulting {sup 36}Cl/Cl ratio within the reactor is thus much higher compared to that in environment. Similar to {sup 129}I, {sup 36}Cl is expected to have leaked out during the accident and it is important to evaluate its effects. In this study, {sup 129}I concentrations were determined in several surface soil samples collected around F1NPP. Average {sup 129}I/{sup 131}I ratio was estimated to be 26.1 ± 5.8 as of March 11, 2011, consistent with calculations using ORIGEN2 code and other published data. {sup 36}Cl/Cl ratios in some of the soil samples were likewise measured and ranged from 1.1 × 10{sup −12} to 2.6 × 10{sup −11}. These are higher compared to ratios measured around F1NPP before the accident. A positive correlation between {sup 36}Cl and {sup 129}I concentration was observed.

  18. Measurement of long-lived radionuclides in surface soil around F1NPP accident site by Accelerator Mass Spectrometry

    Science.gov (United States)

    Miyake, Yasuto; Matsuzaki, Hiroyuki; Sasa, Kimikazu; Takahashi, Tsutomu

    2015-10-01

    In March 2011, vast amounts of radionuclides were released into the environment due to the Fukushima Daiichi Nuclear Power Plant (F1NPP) accident. However, very little work has been done concerning accident-derived long-lived nuclides such as 129I (T1/2 = 1.57 × 107 year) and 36Cl (T1/2 = 3.01 × 105 year). 129I and 131I are both produced by 235U fission in nuclear reactors. Being isotopes of iodine, these nuclides are expected to behave similarly in the environment. This makes 129I useful for retrospective reconstruction of 131I distribution during the initial stages of the accident. On the other hand, 36Cl is generated during reactor operation via neutron capture reaction of 35Cl, an impurity in the coolant or reactor component. Resulting 36Cl/Cl ratio within the reactor is thus much higher compared to that in environment. Similar to 129I, 36Cl is expected to have leaked out during the accident and it is important to evaluate its effects. In this study, 129I concentrations were determined in several surface soil samples collected around F1NPP. Average 129I/131I ratio was estimated to be 26.1 ± 5.8 as of March 11, 2011, consistent with calculations using ORIGEN2 code and other published data. 36Cl/Cl ratios in some of the soil samples were likewise measured and ranged from 1.1 × 10-12 to 2.6 × 10-11. These are higher compared to ratios measured around F1NPP before the accident. A positive correlation between 36Cl and 129I concentration was observed.

  19. Simplified study for the proposed APR1400 condenser performance based on EL-DABAA SITE, EGYPT, with respect to BNPP and SHIN KORI NPP

    Energy Technology Data Exchange (ETDEWEB)

    Abdoelatef, M. Gomaa; Rezk, Osama; Lee, YonKwan [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-10-15

    • Perception of nuclear power as a convenient, economically competitive and viable source of energy which, if introduced in the country, would not only complement the traditional energy sources, but would also promote technological development and serve as an incentive for social and economic progress. In this paper we will introduce APR-1400 as the most likely selected reactor type for 1st Egyptian Nuclear Power Plant. Then we will study the optimized APR-1400 condenser performance based on El-Dabaa site conditions. As the climate conditions, especially the seawater temperatures (intake for the cooling system) having a direct effects on the condenser performance and the overall NPP Efficiency, we studied the seawater temperature change based on EL-Dabaa site conditions and it's feedback on the proposed APR-1400 condenser performance and the NPP efficiency. All of the calculations and analysis had been executed by using KINGS NPA by applying EL-Dabaa seawater temperature variations for the 2 types of APR-1400 Condensers (Shinkori, south Korea and Barakah, UAE), and the main findings were as follow: For the APR-1400 condensers (Shinkori and Barakah) performance • The average difference all over the year for saturation temperature, cooling water outlet temperature, and condenser pressure are 0.135 .deg. C, .05785 .deg. C, and 0.3948 mHgA respectively. This shows that the Barakah condenser performance is not significantly better than the shinkori condenser performance based on EL-Dabaa Conditions, especially if we considered the cost difference between the two condensers designs. For APR-1400 NPPs (Shinkori and Barakah) net efficiency • The average difference all over the year for the power productions and net efficiency are 1.4791 MWe and .00037 %, respectively.

  20. Post-PKS tailoring steps of a disaccharide-containing polyene NPP in Pseudonocardia autotrophica.

    Directory of Open Access Journals (Sweden)

    Hye-Jin Kim

    Full Text Available A novel polyene compound NPP identified in a rare actinomycetes, Pseudonocardia autotrophica KCTC9441, was shown to contain an aglycone identical to nystatin but to harbor a unique di-sugar moiety, mycosaminyl-(α1-4-N-acetyl-glucosamine, which led to higher solubility and reduced hemolytic activity. Although the nppDI was proved to be responsible for the transfer of first polyene sugar, mycosamine in NPP biosynthesis, the gene responsible for the second sugar extending glycosyltransferase (GT as well as NPP post-PKS tailoring mechanism remained unknown. Here, we identified a NPP-specific second sugar extending GT gene named nppY, located at the edge of the NPP biosynthetic gene cluster. Targeted nppY gene deletion and its complementation proved that nppY is indeed responsible for the transfer of second sugar, N-acetyl-glucosamine in NPP biosynthesis. Site-directed mutagenesis on nppY also revealed several amino acid residues critical for NppY GT function. Moreover, a combination of deletions and complementations of two GT genes (nppDI and nppY and one P450 hydroxylase gene (nppL involved in the NPP post-PKS biosynthesis revealed that NPP aglycone is sequentially modified by the two different GTs encoded by nppDI and nppY, respectively, followed by the nppL-driven regio-specific hydroxylation at the NPP C10 position. These results set the stage for the biotechnological application of sugar diversification for the biosynthesis of novel polyene compounds in actinomycetes.

  1. Integrated ageing management of Atucha NPP

    Energy Technology Data Exchange (ETDEWEB)

    Ranalli, Juan M.; Marchena, Martin H.; Zorrilla, Jorge R.; Antonaccio, Elvio E.; Brenna, Pablo; Yllanez, Daniela; Cruz, Gerardo Vera de la; Luraschi, Carlos, E-mail: ranalli@cnea.gov.ar [Gerencia Coordinacion Proyectos CNEA-NASA, Comision Nacional de Energia Atomica, Buenos Aires (Argentina); Sabransky, Mario, E-mail: msabransky@na-sa.com.ar [Departamento Gestion de Envejecimiento, Central Nuclear Atucha I-II Nucleoelectrica Argentina S.A., Provincia de Buenos Aires (Argentina)

    2013-07-01

    Atucha NPP is a two PHWR unit site located in Lima, Province of Buenos Aires, 120 km north of Buenos Aires, Argentina. Until recent, the site was split in Atucha I NPP, a 350 MW pressure vessel heavy water reactor in operation since 1974; and Atucha II, a similar design reactor, twice as big as Atucha I finishing a delayed construction. With the start-up of Atucha II and aiming to integrate the management of the plants, the Utility (Nucleolectrica Argentina Sociedad Anonima - NASA) has reorganized its operation units. Within this reorganization, an Ageing Management Department has been created to cope with all ageing issues of both Atucha I and II units. The Atomic Energy Commission of Argentina (Comision Nacional de Energia Atomica - CNEA) is a state-owned R and D organization that; among other functions such as designing and building research reactors, developing uranium mining and supplying radioisotopes to the medical market; is in charge of providing support and technological update to all Argentinean NPPs. The Ageing Management Department of Atucha NPP and the Ageing Management Division of CNEA has formed a joint working group in order to set up an Integrated Ageing Management Program for Atucha NPP following IAEA guidelines. In the present work a summary of the activities, documental structure and first outputs of the Integrated Ageing Management Program of Atucha NPP is presented. (author)

  2. Characterization in support of the activities of the plan of restoration of the site of the Jose Cabrera NPP; Caracterizacion soporte de las actividades del plan de restauracion del emplazamiento de la CN Jose Cabrera

    Energy Technology Data Exchange (ETDEWEB)

    Gimeno Blesa, M. E.; Lopez Fernandez, M. T.; Martin Palomo, N.

    2012-07-01

    This paper presents the methodology used to perform radiological characterization of the grounds of the Jose Cabrera NPP. The information gained in the early stages of planning the project of dismantling has been supplemented with the results of the campaigns developed during the implementation phase of the project. The joint analysis of all the data obtained, provided that they are sufficient in quantity and quality, is the starting point to establish the future actions of restoring the site; selection of the most appropriate restoration techniques and identification of specific areas of action.

  3. Suomi Npp Products Performance

    Science.gov (United States)

    Zhou, L.

    2014-12-01

    A suite of Sensor Data Records (SDRs) and Environment Data Records (EDRs) is generated from the Joint Polar Satellite System (JPSS) operational environmental satellite system. The products include atmospheric, ocean, land surface and cryospheric products from the Visible Infrared Imaging Radiometer Suite (VIIRS); atmospheric sounding products from the Cross-track Infrared Sounder (CrIS) and the Advance Technology Microwave Sounder (ATMS); and ozone products from the Ozone Mapping and Profiler Suite (OMPS). These EDRs undergo a rigorous validation process and algorithm updates to achieve a product maturity needed for end user applications. Since the successful launch of Suomi National Polar Partnership (SNPP) satellite in October 2011, significant progresses have been made on calibration and validation of the SNPP data products. By far all products were publicly available and most products were ready for operational evaluation. Most products also are expected to meet requirements and work is underway to reach validated maturity status and fully operational use. Further developments and improvements of the algorithms for J1 have been planned based on the JPSS requirements and lessons learned from SNPP. Sensitivity and impact studies are performed as sensor test data become available. For the majority of data products, no significant changes in sensor input and corresponding sensor degradation are expected. However, the J1 products will undergo the same rigorous calibration and validation process as the S-NPP products once the on-orbit data are available. The schedule for the maturity of the J1 data products however is expected to be accelerated compared to that for S-NPP as lessons learned from the S-NPP mission will be applied to the J1 satellite data. In the presentation, we will provide an overview of the latest SNPP data products' quality status and the plan forward for JPSS-1 algorithm updates.

  4. An Investigation of a Novel Cross-Calibration Method of FY-3C/VIRR against NPP/VIIRS in the Dunhuang Test Site

    Directory of Open Access Journals (Sweden)

    Caixia Gao

    2016-01-01

    Full Text Available Radiometric cross-calibration of Earth observation sensors is an effective approach to evaluate instrument calibration performance, identify and diagnose calibration anomalies, and quantify the consistency of measurements from different sensors. In this study a novel cross-calibration method is proposed, taking into account the spectral and viewing angle differences adequately; the method is applied to the FY-3C/Visible Infrared Radiometer (VIRR, taking the Suomi National Polar-Orbiting Partnership (NPP/Visible Infrared Imaging Radiometer Suite (VIIRS as a reference. The results show that the relative difference between the two sets increases from January to May 2014, and becomes lower for the data on 24 July, 11 September, and 16 September, within approximately 10%. This phenomenon is caused by the updating of the calibration coefficients in the VIRR datasets with results from a vicarious method on June 2014. After performing an approximate estimation of the uncertainty, it is demonstrated that this calibration has a total uncertainty of 5.5%–6.0%, which is mainly from the uncertainty of the Bidirectional Reflectance Distribution Function model.

  5. Use of reconnaissance level information for environmental assessment. [Information available from existing sources that satisfies information needs of siting and operational aspects of NPP

    Energy Technology Data Exchange (ETDEWEB)

    Foster, R.F.; Rickard, W.H.; Strand, J.A.; Warner, M.L.

    1979-11-01

    Reconnaissance level information (RLI) sufficient for comparing the environmental and socio-economic features of candidate sites for nuclear power stations and for guiding plant design, baseline surveys, and operational practices is usually available from published reports, public records, and knowledgeable individuals. Environmental concerns of special importance for site evaluation include: aquatic ecology, terrestrial ecology, land and water use, socio-economics, and institutional constraints. A scheme is suggested for using RLI to assign classifications to candidate sites based on the potential level of concern associated with the different environmental features.

  6. Grohnde. Documentation of the police operation during the demonstration against the NPP Grohnde on 19.03.1977 and the evacuation of the occupied cooling tower site on 23.08.1977; Grohnde. Dokumentation der Polizeieinsaetze anlaesslich der Demonstration gegen das Kernkraftwerk Grohnde am 19.03.1977 und der Raeumung des besetzten Kuehlturmgelaendes am 23.08.1977

    Energy Technology Data Exchange (ETDEWEB)

    Stricker, Michael

    2014-07-01

    The documentation of the police operation during the demonstration against the NPP Grohnde on 16.03.1977 and the evacuation of the occupied cooling tower site on 23.08.1977 covers the following issues: involved action forces: police Niedersachsen, police Nordrhein-Westfalen, police Schleswig-Holstein, police Bremen and the Bundesgrenzschutz; concept of the police operation, provisions (lodging and board) for the police, operating resources, details of the operation sequence; post-processing of the operation; the Grohnde trials.

  7. Study of the transfer of 137Cs from fodder to cow milk in the region around Narora Atomic Power Station NPP Site, India.

    Science.gov (United States)

    Kumar, Deepak; Kumar, Avinash; Sharma, A K; Singh, B; Ravi, P M; Sarkar, P K

    2013-09-01

    Site-specific transfer coefficient from feed to cow's milk, for (137)Cs in the villages around Narora, a nuclear power station site in India, determined over a period of 17 y, is presented in this paper. In the transport model for the prediction of the concentration of (137)Cs in milk, the transfer coefficient from feed to milk, Fm, is an important parameter. The transfer coefficient value is determined from (137)Cs concentration in milk and grass samples of the Narora region, and the result ranged from 4.28E-03 to 3.30E-02 d l(-1) with a geometric mean value of 1.15E-03 d l(-1). The highest and the lowest values were only below one order of magnitude different from the mean, regardless of the type of diet, milk yield and age of the cow. The result is compared with that for (40)K, determined concurrently at the same region and ranged from 6.92E-03 to 8.01E-03 d l(-1) with a geometric mean value of 7.45E-03 d l(-1). This parameter is quite useful in decision-making for implementing countermeasures during a large-area contamination with (137)Cs in tropical areas like Narora. The ingestion dose from fallout (137)Cs through milk intake for adult and child is also estimated.

  8. Does climate directly influence NPP globally?

    Science.gov (United States)

    Chu, Chengjin; Bartlett, Megan; Wang, Youshi; He, Fangliang; Weiner, Jacob; Chave, Jérôme; Sack, Lawren

    2016-01-01

    The need for rigorous analyses of climate impacts has never been more crucial. Current textbooks state that climate directly influences ecosystem annual net primary productivity (NPP), emphasizing the urgent need to monitor the impacts of climate change. A recent paper challenged this consensus, arguing, based on an analysis of NPP for 1247 woody plant communities across global climate gradients, that temperature and precipitation have negligible direct effects on NPP and only perhaps have indirect effects by constraining total stand biomass (Mtot ) and stand age (a). The authors of that study concluded that the length of the growing season (lgs ) might have a minor influence on NPP, an effect they considered not to be directly related to climate. In this article, we describe flaws that affected that study's conclusions and present novel analyses to disentangle the effects of stand variables and climate in determining NPP. We re-analyzed the same database to partition the direct and indirect effects of climate on NPP, using three approaches: maximum-likelihood model selection, independent-effects analysis, and structural equation modeling. These new analyses showed that about half of the global variation in NPP could be explained by Mtot combined with climate variables and supported strong and direct influences of climate independently of Mtot , both for NPP and for net biomass change averaged across the known lifetime of the stands (ABC = average biomass change). We show that lgs is an important climate variable, intrinsically correlated with, and contributing to mean annual temperature and precipitation (Tann and Pann ), all important climatic drivers of NPP. Our analyses provide guidance for statistical and mechanistic analyses of climate drivers of ecosystem processes for predictive modeling and provide novel evidence supporting the strong, direct role of climate in determining vegetation productivity at the global scale.

  9. Suomi NPP Ground System Performance

    Science.gov (United States)

    Grant, K. D.; Bergeron, C.

    2013-12-01

    The National Oceanic and Atmospheric Administration (NOAA) and National Aeronautics and Space Administration (NASA) are jointly acquiring the next-generation civilian weather and environmental satellite system: the Joint Polar Satellite System (JPSS). JPSS will replace the afternoon orbit component and ground processing system of the current Polar-orbiting Operational Environmental Satellites (POES) managed by NOAA. The JPSS satellites will carry a suite of sensors designed to collect meteorological, oceanographic, climatological and geophysical observations of the Earth. The first satellite in the JPSS constellation, known as the Suomi National Polar-orbiting Partnership (Suomi NPP) satellite, was launched on 28 October 2011, and is currently undergoing product calibration and validation activities. As products reach a beta level of maturity, they are made available to the community through NOAA's Comprehensive Large Array-data Stewardship System (CLASS). CGS's data processing capability processes the satellite data from the Joint Polar Satellite System satellites to provide environmental data products (including Sensor Data Records (SDRs) and Environmental Data Records (EDRs)) to NOAA and Department of Defense (DoD) processing centers operated by the United States government. CGS is currently processing and delivering SDRs and EDRs for Suomi NPP and will continue through the lifetime of the Joint Polar Satellite System programs. Following the launch and sensor activation phase of the Suomi NPP mission, full volume data traffic is now flowing from the satellite through CGS's C3, data processing, and data delivery systems. Ground system performance is critical for this operational system. As part of early system checkout, Raytheon measured all aspects of data acquisition, routing, processing, and delivery to ensure operational performance requirements are met, and will continue to be met throughout the mission. Raytheon developed a tool to measure, categorize, and

  10. NPP VIIRS Geometric Performance Status

    Science.gov (United States)

    Lin, Guoqing; Wolfe, Robert E.; Nishihama, Masahiro

    2011-01-01

    Visible Infrared Imager Radiometer Suite (VIIRS) instrument on-board the National Polar-orbiting Operational Environmental Satellite System (NPOESS) Preparatory Project (NPP) satellite is scheduled for launch in October, 2011. It is to provide satellite measured radiance/reflectance data for both weather and climate applications. Along with radiometric calibration, geometric characterization and calibration of Sensor Data Records (SDRs) are crucial to the VIIRS Environmental Data Record (EDR) algorithms and products which are used in numerical weather prediction (NWP). The instrument geometric performance includes: 1) sensor (detector) spatial response, parameterized by the dynamic field of view (DFOV) in the scan direction and instantaneous FOV (IFOV) in the track direction, modulation transfer function (MTF) for the 17 moderate resolution bands (M-bands), and horizontal spatial resolution (HSR) for the five imagery bands (I-bands); 2) matrices of band-to-band co-registration (BBR) from the corresponding detectors in all band pairs; and 3) pointing knowledge and stability characteristics that includes scan plane tilt, scan rate and scan start position variations, and thermally induced variations in pointing with respect to orbital position. They have been calibrated and characterized through ground testing under ambient and thermal vacuum conditions, numerical modeling and analysis. This paper summarizes the results, which are in general compliance with specifications, along with anomaly investigations, and describes paths forward for characterizing on-orbit BBR and spatial response, and for improving instrument on-orbit performance in pointing and geolocation.

  11. Decommissioning Study of Oskarshamn NPP

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, Helena; Anunti, Aake; Edelborg, Mathias [Westinghouse Electric Sweden AB, Vaesteraas (Sweden)

    2013-06-15

    By Swedish law it is the obligation of the nuclear power utilities to satisfactorily demonstrate how a nuclear power plant can be safely decommissioned and dismantled when it is no longer in service as well as calculate the estimated cost of decommissioning of the nuclear power plant. Svensk Kaernbraenslehantering AB (SKB) has been commissioned by the Swedish nuclear power utilities to meet the requirements of current legislation by studying and reporting on suitable technologies and by estimating the costs of decommissioning and dismantling of the Swedish nuclear power plants. The present report is an overview, containing the necessary information to meet the above needs, for Oskarshamn NPP. Information is given for the plant about the inventory of materials and radioactivity at the time for final shutdown. A feasible technique for dismantling is presented and the waste management is described and the resulting waste quantities are estimated. Finally a schedule for the decommissioning phase is given and the costs associated are estimated as a basis for funding.

  12. Decommissioning study of Forsmark NPP

    Energy Technology Data Exchange (ETDEWEB)

    Anunti, Aake; Larsson, Helena; Edelborg, Mathias [Westinghouse Electric Sweden AB, Vaesteraas (Sweden)

    2013-06-15

    By Swedish law it is the obligation of the nuclear power utilities to satisfactorily demonstrate how a nuclear power plant can be safely decommissioned and dismantled when it is no longer in service as well as calculate the estimated cost of decommissioning of the nuclear power plant. Svensk Kaernbraenslehantering AB (SKB) has been commissioned by the Swedish nuclear power utilities to meet the requirements of current legislation by studying and reporting on suitable technologies and by estimating the costs of decommissioning and dismantling of the Swedish nuclear power plants. The present report is an overview, containing the necessary information to meet the above needs, for the Forsmark NPP. Information is given for the plant about the inventory of materials and radioactivity at the time for final shutdown. A feasible technique for dismantling is presented and the waste management is described and the resulting waste quantities are estimated. Finally a schedule for the decommissioning phase is given and the costs associated are estimated as a basis for funding.

  13. Experience Practices on Decontamination Activity in NPP Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Suk Bon; Kim, Jeongju; Sohn, Wook [Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

    2016-10-15

    Decommissioning of a nuclear power plant (NPP) involves various technical and administrative activities for a utility to terminate its license, which allows the plant site to be released from the regulatory control (site release). Decontamination activity in NPP decommissioning is one of the main technical activities to be performed during the decommissioning. The decontamination at decommissioning sites is usually performed due to several reasons such as reducing personnel dose and disposal costs, and cleanup to meet license termination requirements by using physical or chemical removal techniques proven through the previous experience practices. This paper introduces the best and worst practices for the decontamination activities collected from the decommissioning operational experiences through the implementation of nuclear decommissioning projects around the world. Review of the experiences of decontamination shows that it is important to conduct an advanced planning for optimized implementation of decontamination taking into considering site specific conditions such as operating time, reactor type, system, and so on. Also, a review of newer decontamination methods is necessary to safely and economically decommission the nuclear facility.

  14. Key Features of the Deployed NPP/NPOESS Ground System

    Science.gov (United States)

    Heckmann, G.; Grant, K. D.; Mulligan, J. E.

    2010-12-01

    operations for NPP. C3S transitioned to operations at the NOAA Satellite Operations Facility (NSOF) in Suitland Maryland in August 2007 and IDPS transitioned in July 2009. Both segments were involved with several compatibility tests with the NPP Satellite at the Ball Aerospace Technology Corporation (BATC) factory. The compatibility tests involved the spacecraft bus, the four sensors (VIIRS, ATMS, CrIS and OMPS), and both ground segments flowing data between the NSOF and BATC factory and flowing data from the polar ground station (Svalbard) over high-speed links back to the NSOF and the two IDP locations (NESDIS & AFWA). This presentation will describe the NPP/NPOESS ground architecture features & enhancements for the NPOESS era. These will include C3S-provided space-to-ground connectivity, reliable and secure data delivery and insight & oversight of the total operation. For NPOESS the ground architecture is extended to provide additional ground receptor sites to reduce data product delivery times to users and delivery of additional sensor data products from sensors similar to NPP and more NPOESS sensors. This architecture is also extended from two Centrals (NESDIS & AFWA) to two additional Centrals (FNMOC & NAVO). IDPS acts as a buffer minimizing changes in how users request and receive data products.

  15. Spent fuel management of Jose Cabrera NPP

    Energy Technology Data Exchange (ETDEWEB)

    Blanco Zurro, J.E.; Garcia Costilla, M. [Area de Generacion - Unidad Nuclear, Gas Natural Fenosa, Avda. de San Luis, 77, 28033 Madrid (Spain); Lavara Sanz, A. [Division Nuclear, SOCOIN, P. del Club Deportivo, 1 - Edificio 5, 28223 Pozuelo de Alarcon, Madrid (Spain); Martinez Abad, J.E. [Departamento de Residuos de Alta Actividad, ENRESA, C/ Emilio Vargas, 7, 28043 Madrid (Spain)

    2010-07-01

    The definitive shutdown of Jose Cabrera Nuclear Power Plant took place on 30. of April 2006. From this moment, cooperation agreements between ENRESA and GAS NATURAL FENOSA were established to reach, among others objectives, its decommissioning, 3 years after the shutdown of the reactor. In order to accomplish the Spanish nuclear regulation, a spent fuel management plan was developed. This plan determined that the fuel assemblies placed in the spent fuel pool would be managed by means of their storage in an interim installation. For this reason, an Independent Spent Fuel Storage Installation (ISFSI) was built at plant site, pioneer in Spain by its characteristics of design. Different administrative authorizations from the point of view of nuclear safety as well as from the environmental were required for ISFSI licensing process. The transference and storage of spent fuel was carried out using the HI-STORM 100Z Dry Storage System, developed by HOLTEC INTERNATIONAL. This system, designed for the spent fuel storage in casks, supports abnormal and very hard accident conditions. The system has three main components: Storage Cask (HI-STORM), Transfer Cask (HI-TRAC) and Multipurpose Canister (MPC). In addition to this, the system has a specific Transport Cask (HI-STAR) for the future transport out of the Plant. More than 30 Design Modifications to the system and plant were implemented to solve structural problems and to include safety and ALARA improvements. The transfer of the spent fuel and its emplacement in the ISFSI began on January 2009 and finished on September of that year allowing starting the decommissioning process, three years and a half after Jose Cabrera NPP shutdown. (authors)

  16. Integrated risk assessment for multi-unit NPP sites—A comparison

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, C. Senthil, E-mail: cskumar@igcar.gov.in [AERB-Safety Research Institute, Kalpakkam (India); Hassija, Varun; Velusamy, K. [Reactor Design Group, Indira Gandhi Centre for Atomic Research, Kalpakkam (India); Balasubramaniyan, V. [AERB-Safety Research Institute, Kalpakkam (India)

    2015-11-15

    Highlights: • Framework for integrated risk assessment for multi-unit NPP sites. • Categorization of external and internal events. • Modelling of key issues: mission time, cliff-edge, common cause failures, etc. • Safety goals for multi-unit NPP sites. • Comparison of site core damage frequency in one, two, three and four unit sites. - Abstract: Most of the nuclear power producing sites in the world houses multiple units. Such sites are faced with hazards generated from external events: earthquake, tsunami, flood, etc. and can threaten the safety of nuclear power plants. Further, risk from a multiple unit site and its impact on the public and environment was evident during the Fukushima nuclear disaster in March 2011. It is therefore important to evolve a methodology to systematically assess the risk from multi-unit site. For a single unit site, probabilistic risk assessment technique identifies the potential accident scenarios, their consequences, and estimates the core damage frequency that arise due to internal and external hazards. This challenging task becomes even more complex for a multiple unit site, especially when the external hazards that has the potential to generate one or more correlated hazards or a combination of non-correlated hazards are to be modelled. This paper presents an approach to evaluate risk for multiple NPP sites and also compare the risk for sites housing single, double and multiple nuclear plants.

  17. Forest NPP estimation based on MODIS data under cloudless condition

    Institute of Scientific and Technical Information of China (English)

    CHEN LiangFu; GAO YanHua; LI Li; LIU QinHuo; GU XingFa

    2008-01-01

    Based on light-use efficiency model, an MODIS-derived daily net primary production (NPP) model was developed. In this model, a new model for the fraction of photosynthetically active radiation absorbed by vegetation (FPAR) is developed based on leaf area index (LAI) and albedo parameters, and a photosynthetically active radiation (PAR) is calculated from the combination of Bird's model with aerosol optical thickness and water vapor derived from cloud free MODIS images. These two models are integrated into our predicted NPP model, whose most parameters are retrieved from MODIS data. In order to validate our NPP model, the observed NPP in the Qianyanzhou station and the Changbai Mountains station are used to compare with our predicted NPP, showing that they are in good agreement. The NASA NPP products also have been downloaded and compared with the measurements, which shows that the NASA NPP products underestimated NPP in the Qianyanzhou station but overestimated in the Changbai Mountains station in 2004.

  18. The development of stochastic process modeling through risk analysis derived from scheduling of NPP project

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kwang Ho; Roh, Myung Sub [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2013-10-15

    There are so many different factors to consider when constructing a nuclear power plant successfully from planning to decommissioning. According to PMBOK, all projects have nine domains from a holistic project management perspective. They are equally important to all projects, however, this study focuses mostly on the processes required to manage timely completion of the project and conduct risk management. The overall objective of this study is to let you know what the risk analysis derived from scheduling of NPP project is, and understand how to implement the stochastic process modeling through risk management. Building the Nuclear Power Plant is required a great deal of time and fundamental knowledge related to all engineering. That means that integrated project scheduling management with so many activities is necessary and very important. Simulation techniques for scheduling of NPP project using Open Plan program, Crystal Ball program, and Minitab program can be useful tools for designing optimal schedule planning. Thus far, Open Plan and Monte Carlo programs have been used to calculate the critical path for scheduling network analysis. And also, Minitab program has been applied to monitor the scheduling risk. This approach to stochastic modeling through risk analysis of project activities is very useful for optimizing the schedules of activities using Critical Path Method and managing the scheduling control of NPP project. This study has shown new approach to optimal scheduling of NPP project, however, this does not consider the characteristic of activities according to the NPP site conditions. Hence, this study needs more research considering those factors.

  19. Checking of seismic and tsunami hazard for coastal NPP of Chinese continent after Fukushima nuclear accident

    Institute of Scientific and Technical Information of China (English)

    Chang Xiangdong; Zhou Bengang; Zhao Lianda

    2013-01-01

    A checking on seismic and tsunami hazard for coastal nuclear power plant (NPP) of Chinese continent has been made after Japanese Fukushima nuclear accident caused by earthquake tsunami.The results of the checking are introduced briefly in this paper,including the evaluations of seismic and tsunami hazard in NPP siting period,checking results on seismic and tsunami hazard.Because Chinese coastal area belongs to the continental shelf and far from the boundary of plate collision,the tsunami hazard is not significant for coastal area of Chinese continent.However,the effect from tsunami still can' t be excluded absolutely since calculated result of Manila trench tsunami source although the tsunami wave is lower than water level from storm surge.The research about earthquake tsunami will continue in future.The tsunami warning system and emergency program of NPP will be established based on principle of defense in depth in China.

  20. [Specific Features of Scots Pine Seeds Formation in the Remote Period after the Chernobyl NPP Accident].

    Science.gov (United States)

    Geras'kin, S A; Vasiliev, D V; Kuzmenkov, A G

    2015-01-01

    The results of long-term (2007-2011) observations on the quality of seed progeny in Scots pine populations inhabiting the sites within the Bryansk region contaminated as a result of the Chernobyl NPP accident are presented. Formed under the chronic exposure seeds are characterized by a high interannual variability, which is largely determined by weather conditions.

  1. Local network deployed around the Kozloduy NPP - a useful tool for seismological monitoring

    Science.gov (United States)

    Solakov, Dimcho; Simeonova, Stela; Dimitrova, Liliya; Slavcheva, Krasimira; Raykova, Plamena; Popova, Maria; Georgiev, Ivan

    2015-04-01

    Radiation risks may transcend national borders, and international cooperation serves to promote and enhance safety globally by exchanging experience and by improving capabilities to control hazards, to prevent accidents, to respond to emergencies and to mitigate any harmful consequences. International safety standards provide support for states in meeting their obligations under general principles of international law, such as those relating to environmental protection. Seismic safety is a key element of NPP safe operation. Safety and security measures have in common the aim of protecting human life and health and the environment. The Kozloduy NPP site is located in the stable part of the Moesian platform (area of about 50000 km2). From seismological point of view the Moesian platform is the most quite area on the territory of Bulgaria. There are neither historical nor instrumental earthquakes with M>4.5 occurred within the platform. The near region (area with radial extent of 30 km) of the NPP site is characterized with very low seismic activity. The strongest recorded quake is the 1987 earthquake МS=3.6, localized 22 km northwest of the Kozloduy NPP site on the territory of Romania. In line with international practice, the geological, geophysical and seismological characteristics of the region around the site have been investigated for the purpose of evaluating the seismic hazards at the NPP site. A local network (LSN) of sensitive seismographs having a recording capability for micro-earthquakes have been installed around Kozloduy NPP and operated since 1997. The operation and data processing, data interpretation, and reporting of the local micro-earthquake network are linked to the national seismic network (NOTSSI). A real-time data transfer from stations to National Data Center (in Sofia) was implemented using the VPN and MAN networks of the Bulgarian Telecommunication. Real-time and interactive data processing are performed by the Seismic Network Data

  2. Analysis list: npp-13 [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available npp-13 Embryo + ce10 http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/target/npp-13....1.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/target/npp-13.5.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/target/npp...-13.10.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/colo/npp-13.Embryo.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/colo/Embryo.gml ...

  3. Analysis list: npp-3 [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available npp-3 Embryo + ce10 http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/target/npp-3.1....tsv http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/target/npp-3.5.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/target/npp...-3.10.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/colo/npp-3.Embryo.tsv http://dbarchive.biosciencedbc.jp/kyushu-u/ce10/colo/Embryo.gml ...

  4. Activity level of gross α and gross β in airborne aerosol samples around the Qinshan NPP

    Institute of Scientific and Technical Information of China (English)

    CHEN Bin; YE Jida; CHEN Qianyuan; WU Xiaofei; SONG Weili; WANG Hongfeng

    2007-01-01

    The monitoring results of gross α and gross β activity from 2001 to 2005 for environmental airborne aerosol samples around the Qinshan NPP base are presented in this paper. A total of 170 aerosol samples were collected from monitoring sites of Caichenmen village, Qinlian village, Xiajiawan village and Yangliucun village around the Qinshan NPP base. The measured specific activity of gross α and gross β are in the range of 0.02 ~ 0.38 mBq/m3 and 0.10 ~ 1.81 mBq/m3, respectively, with an average of 0.11 mBq/m3 and 0.45mBq/m3, respectively. They are lower than the average of 0.15 mBq/m3 and 0.52mBq/m3, of reference site at Hangzhou City. It is indicated that the specific activity of gross α and gross β for environmental aerosol samples around the Qinshan NPP base had not been increased in normal operating conditions of the NPP.

  5. Knowledge management in the NPP domain

    Energy Technology Data Exchange (ETDEWEB)

    Nilsen, Svein; Bisio, Rossella; Ludvigsen, Jan Tore

    2004-03-15

    This report gives an outlook on Knowledge Management (KM) activities within NPP related establishments as of today. There may be less activity in the NPP world as compared to many other industrial sectors. Still there is an awakening within the NPP industry demanding that KM should be attended to at a larger scale. The most notable reason for this is maybe an imminent increase in the number of people going into retirement. The types of establishments involved cover the major kinds such as utilities, research institutes and worldwide nuclear organizations. The report sums up a few of those efforts that are presently being implemented. Moreover the report looks at general advancements within the field of knowledge management. Simply stated the endeavours belong to either one of two classes. The first class emphasize the use of technology to solve knowledge management problems. The second class regard knowledge management as a problem pertaining to human factors and organizational issues. This report maintain that knowledge management initiatives should make due considerations to both perspectives. This report also sums up the Halden Reactor Project short term KM initiative. (Author)

  6. Specification of requirements to get a license for an Independent Spent Fuel Dry Storage Installation (ISFSI) at the site of the NPP-LV; Especificacion de los requerimientos para tramitar una licencia de una instalacion independiente de almacenamiento temporal en seco de combustible gastado (ISFSI) en el sitio de la CNLV

    Energy Technology Data Exchange (ETDEWEB)

    Serrano R, M. L., E-mail: mlserrano@cnsns.gob.mx [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Barragan 779, Col. Narvarte, 03020 Ciudad de Mexico (Mexico)

    2015-09-15

    This article describes some of the work done in the Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS) to define specifically the requirements that the Federal Electricity Commission (CFE) shall meet to submit for consideration of CNSNS an operation request of an Independent Spent Fuel Dry Storage Installation (ISFSI). The project of a facility of this type arose from the need to provide storage capacity for spent nuclear fuel in the nuclear power plant of Laguna Verde (NPP-LV) and to continue the operation at the same facility in a safe manner. The licensing of these facilities in the United States of America has two modes: specific license or general license. The characteristics of these licenses are described in this article. However, in Mexico the existing national legislation is not designed for such license types, in fact there is a lack of standards or regulations in this regard. The regulatory law of Article 27 of the Constitution in the nuclear matter, only generally establishes that this type of facility requires an authorization from the Ministry of Energy. For this reason and because there is not a national legislation, was necessary to use the legislation that provides the Nuclear Regulatory Commission of USA, the US NRC. However, it cannot be applied as is established, so was necessary that the CNSNS analyze one by one the requirements of both types of license and determine what would be required to NPP-LV to submit its operating license of ISFSI. The American regulatory applicable to an ISFSI, the 10-Cfr-72 of the US NRC, establishes the requirements for both types of licenses. Chapter 10-Cfr was analyzed in all its clauses and coupled to the laws, regulations and standards as well as to the requirements established by CNSNS, all associated with a store spent fuel on site; the respective certification of containers for spent fuel dry storage was not included in this article, even though the CNSNS also performed that activity under the

  7. Forest NPP estimation based on MODIS data under cloudless condition

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Based on light-use efficiency model, an MODIS-derived daily net primary production (NPP) model was developed. In this model, a new model for the fraction of photosynthetically active radiation absorbed by vegetation (FPAR) is developed based on leaf area index (LAI) and albedo parameters, and a pho- tosynthetically active radiation (PAR) is calculated from the combination of Bird’s model with aerosol optical thickness and water vapor derived from cloud free MODIS images. These two models are inte- grated into our predicted NPP model, whose most parameters are retrieved from MODIS data. In order to validate our NPP model, the observed NPP in the Qianyanzhou station and the Changbai Mountains station are used to compare with our predicted NPP, showing that they are in good agreement. The NASA NPP products also have been downloaded and compared with the measurements, which shows that the NASA NPP products underestimated NPP in the Qianyanzhou station but overestimated in the Changbai Mountains station in 2004.

  8. Near Real Time Processing Chain for Suomi NPP Satellite Data

    Science.gov (United States)

    Monsorno, Roberto; Cuozzo, Giovanni; Costa, Armin; Mateescu, Gabriel; Ventura, Bartolomeo; Zebisch, Marc

    2014-05-01

    Since 2009, the EURAC satellite receiving station, located at Corno del Renon, in a free obstacle site at 2260 m a.s.l., has been acquiring data from Aqua and Terra NASA satellites equipped with Moderate Resolution Imaging Spectroradiometer (MODIS) sensors. The experience gained with this local ground segmenthas given the opportunity of adapting and modifying the processing chain for MODIS data to the Suomi NPP, the natural successor to Terra and Aqua satellites. The processing chain, initially implemented by mean of a proprietary system supplied by Seaspace and Advanced Computer System, was further developed by EURAC's Institute for Applied Remote Sensing engineers. Several algorithms have been developed using MODIS and Visible Infrared Imaging Radiometer Suite (VIIRS) data to produce Snow Cover, Particulate Matter estimation and Meteo maps. These products are implemented on a common processor structure based on the use of configuration files and a generic processor. Data and products have then automatically delivered to the customers such as the Autonomous Province of Bolzano-Civil Protection office. For the processing phase we defined two goals: i) the adaptation and implementation of the products already available for MODIS (and possibly new ones) to VIIRS, that is one of the sensors onboard Suomi NPP; ii) the use of an open source processing chain in order to process NPP data in Near Real Time, exploiting the knowledge we acquired on parallel computing. In order to achieve the second goal, the S-NPP data received and ingested are sent as input to RT-STPS (Real-time Software Telemetry Processing System) software developed by the NASA Direct Readout Laboratory 1 (DRL) that gives as output RDR files (Raw Data Record) for VIIRS, ATMS (Advanced Technology Micorwave Sounder) and CrIS (Cross-track Infrared Sounder)sensors. RDR are then transferred to a server equipped with CSPP2 (Community Satellite Processing Package) software developed by the University of

  9. Near-surface final repository for the NPP Chernobyl, Ukraine; Oberflaechennahes Endlager fuer das KKW Tschernobyl, Ukraine

    Energy Technology Data Exchange (ETDEWEB)

    Eichhorn, Heiko [NUKEM Technologies GmbH (Germany)

    2008-07-01

    NUKEM Technologies has realized the project of near-surface final radioactive waste storage at the site of the NPP Chernobyl. The complex includes facilities for treatment and processing of solid wastes, interim storage facilities for high-level waste and a near-surface final repository for conditioned radioactive waste. The project is funded by the European Union in the frame of TACIS.

  10. N-16 monitors: Almaraz NPP experience

    Energy Technology Data Exchange (ETDEWEB)

    Adrada, J. [Almaraz NPP, Madrid (Spain)

    1997-02-01

    Almaraz Nuclear Power Plant has installed N-16 monitors - one per steam generator - to control the leakage rate through the steam generator tubes after the application of leak before break (LBB) criteria for the top tube sheet (TTS). After several years of operation with the N-16 monitors, Almaraz NPP experience may be summarized as follows: N-16 monitors are very useful to follow the steam generator leak rate trend and to detect an incipient tube rupture; but they do not provide an exact absolute leak rate value, mainly when there are small leaks. The evolution of the measured N-16 leak rates varies along the fuel cycle, with the same trend for the 3 steam generators. This behaviour is associated with the primary water chemistry evolution along the cycle.

  11. Prioritization of Delay Factors for NPP Construction Risk in International Project by Using AHP Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Hossen, Muhammed Mufazzal; Kang, Sunkoo; Kim, Jonghyun [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2014-10-15

    construction delay of NPP. The main contribution of the work was the identification of main cause of NPP construction schedule delay for turnkey contractual approached international project in different level. The second contribution was a development of a multi-criteria decision making model for the prioritization of NPP construction delay risk factors. Finally, prioritization of delay factors in different levels of NPP construction delay risk factors were accomplished. The model is developed by using the AHP methodology. This study has produced results and insights that involve one of the most vital aspect which is the quantitative weights and ranking of factors that affect delay in NPP construction. Undoubtedly, it is a necessity in the NPP construction industry for the use of quantitative terms when it comes to schedule delay risk. The outcomes of this study confirm that the model is capable to support decision-makers to examine the strengths and weaknesses of factors in different level of the NPP construction phase. Decision makers of nuclear industry can understand the significance of different factors on NPP construction phase and they can apply risk informed decision making to avoid unexpected construction delay of NPP. This study finds the different party's importance in behind the construction schedule delay of NPP which constitutes main contractor (28.4%), regulatory authority (27.3%), Financial and Country Factor (23.5%), and utility (20.8%).The results show that the top most important 5 sub factors according to global weight in level 2 are delayed regulatory approval, country factor, inadequate completion of design before start of construction, slow procurement, manufacturing of equipment and delivery to the site for installation, and financial matters. This study finds top most important 10 sub-sub factors in the lowest level which are uncompromising regulatory criteria and conflicting licensing documents with existing regulations, robust design documents

  12. Seismic response analysis of Wolsung NPP structure and equipment subjected to scenario earthquakes

    Energy Technology Data Exchange (ETDEWEB)

    Choi, In Kil; Ahn, Seong Moon; Choun, Young Sun; Seo, Jeong Moon

    2005-03-15

    The standard response spectrum proposed by US NRC has been used as a design earthquake for the design of Korean nuclear power plant structures. However, it does not reflect the characteristic of seismological and geological of Korea. In this study, the seismic response analysis of Wolsung NPP structure and equipment were performed. Three types of input motions, artificial time histories that envelop the US NRC Regulatory Guide 1.60 spectrum and the probability based scenario earthquake spectra developed for the Korean NPP site and a typical near-fault earthquake recorded at thirty sites, were used as input motions. The acceleration, displacement and shear force responses of Wolsung containment structure due to the design earthquake were larger than those due to the other input earthquakes. But, considering displacement response increases abruptly as Wolsung NPP structure does nonlinear behavior, the reassessment of the seismic safety margin based on the displacement is necessary if the structure does nonlinear behavior; although it has adequate the seismic safety margin within elastic limit. Among the main safety-related devices, electrical cabinet and pump showed the large responses on the scenario earthquake which has the high frequency characteristic. This has great effects of the seismic capacity of the main devices installed inside of the building. This means that the design earthquake is not so conservative for the safety of the safety related nuclear power plant equipments.

  13. The Terrestrial NPP Simulation in China since 6ka BP

    Institute of Scientific and Technical Information of China (English)

    HE Yong; DONG Wenjie; JI Jinjun; DAN Li

    2005-01-01

    A better understanding of the long-term global carbon cycle required estimate of the changes in terrestrial carbon storage after the last glacial period. The results of simulation at mid-Holocene (MH) from PMIP (Paleoclimate Modeling Intercomparison Project) and the modern data from CRU (Climate Research Unit,East Anglia University, UK) allow us to use the Atmosphere-Vegetation Interaction Model (AVIM) to simulate the Chinese terrestrial net primary productivity (NPP) at 6ka BP and present time. The change of NPP and total NPP in China from now to mid-Holocene are about 54 g m-2yr-1 and 0.63 Pg yr-1,respectively, mainly due to the build-up of temperate forest and tropical rainforest. Chinese terrestrial NPP variation from MH to now is closely related to the variation in intensity of Asian monsoon, which controlled the climate-vegetation pattern change.

  14. EPC projects for EPR Flamanville 3 NPP

    Energy Technology Data Exchange (ETDEWEB)

    Diaz, J.I.; Polo, J.; Aymerich, E.; Cubian, B. [Nuclear Generation Department, Iberdrola Ingenieria y Construccion, Avda. Manoteras 20, 28050 Madrid (Spain)

    2010-07-01

    IBERDROLA Ingenieria y Construccion is carrying out a handful of activities in the EPR Flamanville 3 -FA3 NPP- context since 2007 matching oriented to position the company in the emerging marketplace of new nuclear power plants Generation III+, whose expectation for the next years is highly promising. IBERDROLA Ingenieria y Construccion leads 5 EPC -Engineering, Procurement and Commissioning- projects for FA3 NPP from the Nuclear Island till Sea Water Pumping Station as follows: - Design, procurement. fabrication, installation and testing of 21 shell and tubes heat-exchangers for the nuclear island. 12 out of these 17 HXs are conventional and will be designed according to ASME BPV code Section VIII and have to comply with PED 97/23/CE and ESPN. The remaining 5 HXs are nuclear and will be designed according to ASME BPV code Section III and have also to comply with PED and ESPN. - Design, procurement, fabrication and assembly of 9 demineralizers for different plant systems. Three of these Important To Safety (IPS) equipments have been manufactured according with ASME VIII codes and six of them with EN 13445 code plus additional requirements to comply with PED and final client requirements for nuclear island. - Design, fabrication and installation of qualified travelling water screening filters. The equipments furnished will be two nuclear safety qualified filters and associated equipment (cleaning water system and control system). Additionally some auxiliary devices such as grids, automatic trash rakes and stop gates are included in the contract. - Engineering, procurement, fabrication, erection and commissioning for the condensate treatment plant. This system includes a demineralizer tank, 5 filters, reactive injection mixer, pneumatic and manual valves, piping and instrumentation and control systems. - Engineering, procurement erection and commissioning for the electro-chlorination plant to protect the IPS piping for Condensate Water System for FA3. This system

  15. Stade NPP. Dismantling of the reactor pool

    Energy Technology Data Exchange (ETDEWEB)

    Scharf, Daniel; Dziwis, Joachim [E.ON Anlagenservice GmbH Nukleartechnik, Gelsenkirchen (Germany); Kemp, Lutz-Hagen [KKW Stade GmbH und Co. oHG, Stade (Germany)

    2012-11-01

    Within the scope of the 4{sup th} partial decommissioning permission of Stade NPP the activated and contaminated structures of the reactor pool had to be dismantled in order to gain a completely non-radioactive reactor pool area for the subsequent clearance measurement of the reactor building. In order to achieve the aim it was intended to remove the activated pool liner sheets, its activated framework and several contaminated ventilation channels made of stainless steel, the concrete walls of the reactor pool entirely or in parts depending on their activation level, as well as the remaining activated carbon steel structures of the reactor pool bottom. Embedded in the concrete walls there were several highly contaminated excore tubes and the contaminated pool top edge, which were intended to be removed to its full extent. The contract of the Stade NPP initiated reactor pool dismantling project had been awarded to E.ON Anlagenservice GmbH (EAS) and its subsupplier sat. Kerntechnik GmbH for the concrete dismantling works and was performed as follows. In order to minimize the radiation level in the main working area in accordance with the ALARA principle, the liner sheets and middle parts of its framework were removed by means of angle grinders first, as they were the most dose rate relevant parts. As a result the primary average radiation level in the reactor pool (measured in a distance of 500 mm from the walls) was lowered from 40 {mu}Sv/h to less than 2 {mu}Sv/h. After the minimization of the radiation level in the working area the main dismantling step started with the cutting of the reactor pool walls in blocks by means of diamond rope cutters. Once a concrete block was cut out, it was transported into the fuel pool by means of a crane and crane fork, examined radiologically, marked area by area and segmented to debris by means of an electrical excavator with a hydraulic chisel. Afterwards the debris and carbon steel parts were fractioned and packed for further

  16. MetEd Resources for Embracing Advances with S-NPP and JPSS

    Science.gov (United States)

    Abshire, W. E.; Dills, P. N.; Weingroff, M.

    2014-12-01

    The COMET® Program (www.comet.ucar.edu), a part of the UCAR Community Programs (UCP) at UCAR, receives funding from NOAA NESDIS as well as EUMETSAT and the Meteorological Service of Canada to support education and training in satellite meteorology. For many years COMET's satellite education programs have focused on developing self-paced online educational materials that highlight the capabilities and applications of current and next-generation operational geostationary and polar-orbiting satellites and their relevance to operational forecasters and other user communities. By partnering with experts from the Naval Research Laboratory, NOAA-NESDIS and its Cooperative Institutes, Meteorological Service of Canada, EUMETSAT, and other user communities, COMET stimulates greater use of current and future satellite observations and products. This presentation provides a tour of COMET's satellite training and education offerings that are directly applicable to data and products from the S-NPP and JPSS satellite series. A recommended set of lessons for users who wish to learn more will be highlighted, including excerpts from the newest materials on the Suomi NPP VIIRS imager and its applications, as well as advances in nighttime visible observation with the VIIRS Day-Night Band. We'll show how the lessons introduce users to the advances these systems bring to forecasting, numerical weather prediction, and environmental monitoring. Over 90 satellite-focused, self-paced, online materials are freely available on the of the MetEd Web site (http://www.meted.ucar.edu) via the "Education & Training", "Satellite" topic area. Quite a few polar-orbiting-related lessons are available in both English, Spanish, and French. Additionally, S-NPP and JPSS relevant information can also be found on the the Environmental Satellite Resource Center (ESRC) Web site (www.meted.ucar.edu/esrc) that is maintained by COMET. The ESRC is a searchable, database-driven Web site that provides access to

  17. Validation of MCNP NPP Activation Simulations for Decommissioning Studies by Analysis of NPP Neutron Activation Foil Measurement Campaigns

    Directory of Open Access Journals (Sweden)

    Volmert Ben

    2016-01-01

    Full Text Available In this paper, an overview of the Swiss Nuclear Power Plant (NPP activation methodology is presented and the work towards its validation by in-situ NPP foil irradiation campaigns is outlined. Nuclear Research and consultancy Group (NRG in The Netherlands has been given the task of performing the corresponding neutron metrology. For this purpose, small Aluminium boxes containing a set of circular-shaped neutron activation foils have been prepared. After being irradiated for one complete reactor cycle, the sets have been successfully retrieved, followed by gamma-spectrometric measurements of the individual foils at NRG. Along with the individual activities of the foils, the reaction rates and thermal, intermediate and fast neutron fluence rates at the foil locations have been determined. These determinations include appropriate corrections for gamma self-absorption and neutron self-shielding as well as corresponding measurement uncertainties. The comparison of the NPP Monte Carlo calculations with the results of the foil measurements is done by using an individual generic MCNP model functioning as an interface and allowing the simulation of individual foil activation by predetermined neutron spectra. To summarize, the comparison between calculation and measurement serve as a sound validation of the Swiss NPP activation methodology by demonstrating a satisfying agreement between measurement and calculation. Finally, the validation offers a chance for further improvements of the existing NPP models by ensuing calibration and/or modelling optimizations for key components and structures.

  18. Comprehensive radiation survey and public health assessment in the vicinity of NPP

    Directory of Open Access Journals (Sweden)

    Samoilov A.S.

    2015-12-01

    health indicators of the public living around the NPP, general state of the adult and children public is healthy. There is no impact of the NPP on negative trends in some changing indicators of the adult and children public health.

  19. The new revision of NPP Krsko decommissioning, radioactive waste and spent fuel management program: analyses and results

    Energy Technology Data Exchange (ETDEWEB)

    Zeleznik, Nadja; Kralj, Metka [ARAO, Parmova 53, 1000 Ljubljana (Slovenia); Lokner, Vladimir; Levanat, Ivica; Rapic, Andrea [APO, Savska 41, Zagreb (Croatia); Mele, Irena [IAEA, Vienna (Austria)

    2010-07-01

    The preparation of the new revision of the Decommissioning and Spent Fuel (SF) and Low and Intermediate level Waste (LILW) Disposal Program for the NPP Krsko (Program) started in September 2008 after the acceptance of the Term of Reference for the work by Intergovernmental Committee responsible for implementation of the Agreement between the governments of Slovenia and Croatia on the status and other legal issues related to investment, exploitation, and decommissioning of the Nuclear power plant Krsko. The responsible organizations, APO and ARAO together with NEK prepared all new technical and financial data and relevant inputs for the new revision in which several scenarios based on the accepted boundary conditions were investigated. The strategy of immediate dismantling was analyzed for planned and extended NPP life time together with linked radioactive waste and spent fuel management to calculate yearly annuity to be paid by the owners into the decommissioning funds in Slovenia and Croatia. The new Program incorporated among others new data on the LILW repository including the costs for siting, construction and operation of silos at the location Vrbina in Krsko municipality, the site specific Preliminary Decommissioning Plan for NPP Krsko which included besides dismantling and decontamination approaches also site specific activated and contaminated radioactive waste, and results from the referenced scenario for spent fuel disposal but at very early stage. Important inputs for calculations presented also new amounts of compensations to the local communities for different nuclear facilities which were taken from the supplemented Slovenian regulation and updated fiscal parameters (inflation, interest, discount factors) used in the financial model based on the current development in economical environment. From the obtained data the nominal and discounted costs for the whole nuclear program related to NPP Krsko which is jointly owned by Slovenia and Croatia have

  20. Nuclear Power Plant Module, NPP-1: Nuclear Power Cost Analysis.

    Science.gov (United States)

    Whitelaw, Robert L.

    The purpose of the Nuclear Power Plant Modules, NPP-1, is to determine the total cost of electricity from a nuclear power plant in terms of all the components contributing to cost. The plan of analysis is in five parts: (1) general formulation of the cost equation; (2) capital cost and fixed charges thereon; (3) operational cost for labor,…

  1. Improvement of waste release control in French NPP

    Energy Technology Data Exchange (ETDEWEB)

    Samson, T.; Lucquin, E.; Dupin, M. [EDF/GDL (France); Florence, D. [EDF/GENV (France); Grisot, M. [EDF/CNPE Saint Laurent (France)

    2002-07-01

    The new waste release control in French NPP is more restrictive than the old one and needs heavy investment to bring plants to compliance with it. The great evolutions are a chemical follow up on more chemicals with a higher measurement frequency and with lower maximum concentrations and a specific measurement of carbon 14. Regarding radioactive releases, a new counting has been settled and activity of carbon 14 release is now measured and no longer calculated. The evolution of the French regulation leads to develop specific procedures and analytical techniques in chemistry and in radiochemistry (UV spectrometric methods, carbon 14 measurements,..) EDF NPP operators have launched a voluntarist process to reduce their releases since the beginning and before the evolution of the regulation. EDF priorities in terms of environment care lead henceforth to implement a global optimisation of the impact for a better control of releases. The new regulation will help EDF to reach its goals because it covers all the aspects in one administrative document: it is seen as a real simplification and a clarification towards public. In addition, this new regulation fits in with international practices which will allow an easier comparison of results between EDF and foreign NPP. These big environmental concerns lead EDF to create a national dedicated laboratory (LAMEN) in charge of developing specific measurement procedures to be implemented either by NPP or by sub-contractor laboratories. (authors)

  2. Evaluation of MODIS NPP and GPP products across multiple biomes.

    Science.gov (United States)

    David P. Turner; William D. Ritts; Warren B. Cohen; Stith T. Gower; Steve W. Running; Maosheng Zhao; Marcos H. Costa; Al A. Kirschbaum; Jay M. Ham; Scott R. Saleska; Douglas E. Ahl

    2006-01-01

    Estimates of daily gross primary production (GPP) and annual net primary production (NPP) at the 1 km spatial resolution are now produced operationally for the global terrestrial surface using imagery from the MODIS (Moderate Resolution Imaging Spectroradiometer) sensor. Ecosystem-level measurements of GPP at eddy covariance flux towers and plot-level measurements of...

  3. COMET Program Training Offerings to Support S-NPP and JPSS Utilization

    Science.gov (United States)

    Abshire, W. E.; Dills, P. N.; Weingroff, M.

    2015-12-01

    Are you up to speed on how to exploit new S-NPP capabilities and products? If not, don't worry, because UCAR's COMET program has self-paced online educational materials that highlight the capabilities and applications of current and next-generation operational polar-orbiting and geostationary satellites. The COMET® Program (www.comet.ucar.edu) has long received funding from NOAA NESDIS as well as EUMETSAT and the Meteorological Service of Canada to support education and training in satellite meteorology. By partnering with experts from NOAA-NESDIS and its Cooperative Institutes, Meteorological Service of Canada, EUMETSAT, the Naval Research Laboratory and others, COMET's self-paced training stimulates greater use of current and future satellite observations and products. Right now, over 70 satellite-focused, self-paced, online materials are freely available in English via the MetEd Web site at http://meted.ucar.edu/topics/satellite. Additionally, quite a few lessons are also available in Spanish and French making training more easily accessible to an international audience. This presentation will focus on COMET's latest satellite training and education offerings that are directly applicable to data and products from the S-NPP and JPSS satellite series. A recommended set of lessons for users who wish to learn more will be highlighted, including excerpts from the newest materials on the Suomi NPP VIIRS imager and its applications, as well as advances in nighttime visible observation with the VIIRS Day-Night Band. We'll show how the lessons introduce users to the advances these systems bring to forecasting, numerical weather prediction, and environmental monitoring. Finally, new relevant training initiatives will also be presented.

  4. INTEGRATION OF NPP SEMI MECHANISTIC - MODELLING, REMOTE SENSING AND CIS IN ESTIMATING CO 2 ABSORPTION OF FOREST VEGETATION IN LORE LINDU NATIONAL PARK

    Directory of Open Access Journals (Sweden)

    GODE GRAVENHORsr

    2006-01-01

    Full Text Available Net Primary Production, NPP, is one of the most important variables characterizing the performance of an ecosystem. It is the difference between the total carbon uptake from the air through photosynthesis and the carbon loss due to respiration by living plants. However, field measurements of NPP are time-consuming and expensive. Current techniques are therefore not useful for obtaining NPP estimates over large areas. By combining the remote sensing and GIS technology and modelling, we can estimate NPP of a large ecosystem with a little ease. This paper discusses the use of a process based physiological sunshade canopy models in estimating NPP of Lore Lindu National Park (LLNP. The discussion includes on how to parameterize the models and how to scale up from leaf to the canopy. The version documented in this manuscript is called NetPro Model, which is a potential NPP model where water effect is not included yet. The model integrates CIS and the use of Remote Sensing, and written in Visual Basic 6.0 programming language and Map Objects 2.1. NetPro has the capability of estimating NPP of Cs vegetation under present environmental condition and under future scenarios (increasing [CO2], increasing temperature and increasing or decreasing leaf nitrogen level. Based on site-measured parameterisation of VaM* (Photosynthetic capacity, /Jj (Respiration and leaf nitrogen ONi, the model was run under increasing CO2 level and temperature and varied leaf nitrogen. The output of the semi-mechanistic modelling is radiation use efficiency (?. Analysis of remote sensing data give Normalized Difference Vegetation Index (NDVI and related Leaf Area Index (LAI and traction of absorbed Photosynthetically Active Radiation (/M > AK. Climate data are obtained from 12 meteorological stations around die parks, which includes global radiations, minimum and maximum temperature. CO2 absorbed by vegetation (Gross Primary Production, GPP is then calculated using the above

  5. Observation and modeling of NPP for Pinus elliottii plantation in subtropical China

    Institute of Scientific and Technical Information of China (English)

    MA ZeQing; LIU QiJing; WANG HuiMin; LI XuanRan; ZENG HuiQing; XU WenJia

    2008-01-01

    Based on the stem analysis of 59 individuals of Pinus elliottii in combination with tree biomass models,we calculated annual biomass increment of forest plots at Qianyanzhou Ecological Station,Chinese Academy of Sciences in subtropical China. In addition,canopy layer and community NPP were calculated based on 12 years' litter fall data. NPP of the 21-year-old forest was estimated by using the BIOME BGC model; and both measured NPP and estimated NPP were compared with flux data. Community lation between annual litter fall and annual biomass increment; and the litter fall was 1.19 times the biomass increment of living trees. From 1985 to 2005,average NPP and GPP values based on BGC simulated tree layer NPP values. NPP accounted for 30.2% (25.6%-32.9%) of GPP,while NEP accounted for 57.5% (48.1%-66.5%) of tree-layer NPP and 41.74% (37%-52%) of stand NPP. Soil respiration accounted for 77.0% of measured tree NPP and 55.9% of the measured stand NPP. NEE based on eddy covariance method was 12.97% higher than the observed NEP.

  6. Surface pathway of radioactive plume of TEPCO Fukushima NPP1 released 134Cs and 137Cs

    Directory of Open Access Journals (Sweden)

    M. Aoyama

    2013-05-01

    Full Text Available 134Cs and 137Cs were released to the North Pacific Ocean by two major likely pathways, direct discharge from the Fukushima NPP1 accident site and atmospheric deposition off Honshu Islands of Japan, east and northeast of the site. High density observations of 134Cs and 137Cs in the surface water were carried out by 17 cruises of cargo ships and several research vessel cruises from March 2011 till March 2012. The main body of radioactive surface plume of which activity exceeded 10 Bq m−3 travelled along 40° N and reached the International Date Line on March 2012, one year after the accident. A distinct feature of the radioactive plume was that it stayed confined along 40° N when the plume reached the International Date Line. A zonal speed of the radioactive plume was estimated to be about 8 cm s−1 which was consistent with zonal speeds derived by Argo floats at the region.

  7. Mapping and analysing cropland use intensity from a NPP perspective

    Science.gov (United States)

    Niedertscheider, Maria; Kastner, Thomas; Fetzel, Tamara; Haberl, Helmut; Kroisleitner, Christine; Plutzar, Christoph; Erb, Karl-Heinz

    2016-01-01

    Meeting expected surges in global biomass demand while protecting pristine ecosystems likely requires intensification of current croplands. Yet many uncertainties relate to the potentials for cropland intensification, mainly because conceptualizing and measuring land use intensity is intricate, particularly at the global scale. We present a spatially explicit analysis of global cropland use intensity, following an ecological energy flow perspective. We analyze (a) changes of net primary production (NPP) from the potential system (i.e. assuming undisturbed vegetation) to croplands around 2000 and relate these changes to (b) inputs of (N) fertilizer and irrigation and (c) to biomass outputs, allowing for a three dimensional focus on intensification. Globally the actual NPP of croplands, expressed as per cent of their potential NPP (NPPact%), amounts to 77%. A mix of socio-economic and natural factors explains the high spatial variation which ranges from 22.6% to 416.0% within the inner 95 percentiles. NPPact% is well below NPPpot in many developing, (Sub-) Tropical regions, while it massively surpasses NPPpot on irrigated drylands and in many industrialized temperate regions. The interrelations of NPP losses (i.e. the difference between NPPact and NPPpot), agricultural inputs and biomass harvest differ substantially between biogeographical regions. Maintaining NPPpot was particularly N-intensive in forest biomes, as compared to cropland in natural grassland biomes. However, much higher levels of biomass harvest occur in forest biomes. We show that fertilization loads correlate with NPPact% linearly, but the relation gets increasingly blurred beyond a level of 125 kgN ha-1. Thus, large potentials exist to improve N-efficiency at the global scale, as only 10% of global croplands are above this level. Reallocating surplus N could substantially reduce NPP losses by up to 80% below current levels and at the same time increase biomass harvest by almost 30%. However, we

  8. NPP atucha I. 40 years of commercial operation of the heavy-water reactor in Argentina

    Energy Technology Data Exchange (ETDEWEB)

    Mazzantini, Oscar A. [Nuclearelectrica Argentina SA, Atucha (Argentina); Fabian, Hermann O.

    2014-08-15

    The nuclear power plant (NPP) Atucha I in Argentina - a heavy-water reactor with pressure vessel technology operated with natural uranium - accomplished a remarkable anniversary on 26 June 2014: 40 years of commercial operation. State-run Nucleoelectrica Argentina SA (NA SA), being today the plant owner and operator commemorated this anniversary, as only few NPP exist which can refer to such long operating time with good performance. With a limited operating licence to 40 years (or rather 32 full load years) by the National Atomic Energy Agency (Comision National de Energia Atomica/CNEA) the plant had been handed over to CNEA on 24 June 1974 by the general contractor, Siemens AG, after release of the works contract on 1. June 1968. The site is located to the north-west of Buenos Aires upstream on the Rio Parana. The plant has an output of 345 MW; it has been continuously, reliable and successfully operated. Atucha I supplied overall 82.4 TWh of electricity into the national grid (220 kV) with an integral operating availability of 76.5 %.

  9. Conceptual Design of Hybrid Safety Features for NPP by Utilizing Solar Updraft Tower

    Energy Technology Data Exchange (ETDEWEB)

    Song, Sub Lee [Handong Global University, Pohang (Korea, Republic of); Choi, Young Jae; Kim, Yong Jin [KAIST, Daejeon (Korea, Republic of); Park, Hyo Chan; Park, Youn Won [BEES, Daejeon (Korea, Republic of)

    2016-05-15

    In this study, hybrid safety features for NPP with solar updraft tower (SUT) is conceptually suggested to cope with loss of ultimate heat sink accident. The hybrid safety features utilizing SUT target NPPs in seashore of Arabian Gulf. Usually NPPs are constructed near seashore to utilize sea water as an ultimate heat sink. Residual heat or decay heat of nuclear reactor will diffuse into the ocean through the condenser. NPPs in Middle East are expected to be placed in seashore of Arabian Gulf. The NPP site of Barakah is an actual example. For NPPs in seashore of Arabian Gulf, an additional safety concern should be considered. Arabian Gulf is the largest oil transporting route in the world. The oil spill risk in Arabian Gulf will be the largest simultaneously. Unfortunately, not like other oceans, Arabian Gulf is a kind of closed ocean which does not have strong ocean currents connected to out of the gulf. If once oil spill is occurred, its influence can be propagated more than our expectation. The spilled oil also can affect to NPPs in seashore by covering surfaces of condenser. It will directly cause loss of ultimate heat sink. The hybrid safety features of SUT system are expected to aid normal operation of safety system and mitigate consequence of severe accident. Detail analysis and technology development is ongoing now.

  10. Metallography and Microanalysis of Qinshan PhaseⅠ NPP Spent Fuel Rods

    Institute of Scientific and Technical Information of China (English)

    QIAN; Jin; BIAN; Wei; GUO; Li-na; GUO; Yi-fan; CHU; Feng-min; LIANG; Zheng-qiang

    2015-01-01

    Qinshan PhaseⅠNPP is a first domestic commercial PWR and its fuel rods and fuel assembly were designed and manufactured by China.In order to assess the irradiation properties of the fuel rods,8spent fuel rods which were drew out from 3fuel assemblies were transferred to CIAE hot cells for post irradiation examination(PIE)in 2014.The cladding material of the fuel

  11. Feed water distribution pipe replacement at Loviisa NPP

    Energy Technology Data Exchange (ETDEWEB)

    Savolainen, S.; Elsing, B. [Imatran Voima Loviisa NPP (Finland)

    1995-12-31

    Imatran Voima Oy operates two WWER-440 reactors. Unit 1 has been operating since 1977 and unit 2 since 1981. First damages of feed water distribution (FWD) pipe were observed in 1989. The FWD-pipe T-connection had suffered from severe erosion corrosion damages. Similar damages have been been found also in other WWER-440 type NPPs. In 1989 the nozzles of the steam generator YB11 were inspected. No signs of the damages or signs of erosion were detected. The first damaged nozzles were found in 1992 in steam generators of both units. In 1992 it was started studying different possibilities to either repair or replace the damaged FWD-pipes. Due to the difficult conditions for repairing the damaged nozzles it was decided to study different FWD-pipe constructions. In 1991 two new feedwater distributors had been implemented at Dukovany NPP designed by Vitckovice company. Additionally OKB Gidropress had presented their design for new collector. In spring 1994 all the six steam generators of Rovno NPP unit 1 were replaced with FWD-pipes designed by OKB Gidropress. After the implementation an experimental program with the new systems was carried out. Due to the successful experiments at Rovno NPP Unit 1 it was decided to implement `Gidropress solution` during 1994 refueling outage into the steam generator YB52 at Loviisa 2. The object of this paper is to discuss the new FWD-pipe and its effects on the plant safety during normal and accident conditions. (orig.).

  12. Integrated tool for NPP lifetime management in Spain

    Energy Technology Data Exchange (ETDEWEB)

    Francia, L. [UNESA, Madrid (Spain); Lopez de Santa Maria, J. [ASCO-Vandellos 2 NPPs l' Hospitalet de l' Infant, Tarragona (Spain); Cardoso, A. [Tecnatom SA, Madrid (Spain)

    2001-07-01

    The project for the Integrated Nuclear Power Plant Lifetime Management System SIGEVI (Sistema Integrado de GEstion de VIda de Centrales Nucleares) was initiated in April 1998 and finalized in December 2000, the main objective of the project being to develop a computer application facilitating the assessment of the condition and lifetime of nuclear power plant components. This constituted the second phase of a further-reaching project on NPP Lifetime Management. During the first phase of this project, carried out between 1992 and 1995, the methodology and strategy for the lifetime management of the Spanish NPP's were developed. Among others, degradation phenomena were assessed and the most adequate methods for their monitoring were defined. The SIGEVI Project has been performed under the management of UNESA (Spanish Electricity Association) and with the collaboration of different engineering firms and research institutes (Tecnatom, Empresarios Agrupados, Ufisa, Initec and IIT), with Vandellos II as the pilot plant. The rest of the Spanish NPP's have also actively participated through the Project Steering Committee. The following sections describe the scope, the structure and the main functionalities of the system SIGEVI. (authors)

  13. Robot dispatching Scenario for Accident Condition Monitoring of NPP

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jongseog [Central Research Institute of Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

    2013-05-15

    In March of 2011, unanticipated big size of tsunami attacks Fukushima NPP, this accident results in explosion of containment building. Tokyo electric power of Japan couldn't dispatch a robot for monitoring of containment inside. USA Packbot robot used for desert war in Iraq was supplied to Fukushima NPP for monitoring of high radiation area. Packbot also couldn't reach deep inside of Fukushima NPP due to short length of power cable. Japanese robot 'Queens' also failed to complete a mission due to communication problem between robot and operator. I think major reason of these robot failures is absence of robot dispatching scenario. If there was a scenario and a rehearsal for monitoring during or after accident, these unanticipated obstacles could be overcome. Robot dispatching scenario studied for accident of nuclear power plant was described herein. Study on scenario of robot dispatching is performed. Flying robot is regarded as good choice for accident monitoring. Walking robot with arm equipped is good for emergency valve close. Short time work and shift work by several robots can be a solution for high radiation area. Thin and soft cable with rolling reel can be a good solution for long time work and good communication.

  14. Preparation for Early Termination of Ignalina NPP Operation

    Energy Technology Data Exchange (ETDEWEB)

    Poskas, P.; Poskas, R.

    2003-02-26

    Seimas (Parliament of Lithuania) approved updated National Energy strategy where it is indicated that first Unit will be shutdown before the year 2005 and second Unit in 2009 if funding for decommissioning is available from EU and other donors. In accordance to Ignalina NPP Unit 1 Closure Law the Government of Lithuania approved the Ignalina NPP Unit 1 Decommissioning Program until year 2005. For enforcement of this program, the plan of measures for implementation of the program was prepared and approved by the Minister of Economy. The plan consists of two parts, namely technical- environmental and social-economic. Technical-environmental measures are mostly oriented to the safe management of spent nuclear fuel and operational radioactive waste stored at the plant and preparation of licensing documents for Unit 1 decommissioning. Social-economic measures are oriented to mitigate negative social and economic impact on Lithuania, inhabitants of the region, and, particularly, o n the staff of Ignalina NPP by means of creating favorable conditions for a balanced social and economic development of the region. In this paper analysis of planned activities, licensing requirements for decommissioning, progress in preparation of the Final Decommissioning Plan is discussed.

  15. A Radiological Survey Approach to Use Prior to Decommissioning: Results from a Technology Scanning and Assessment Project Focused on the Chornobyl NPP

    Energy Technology Data Exchange (ETDEWEB)

    Milchikov, A.; Hund, G.; Davidko, M.

    1999-10-20

    The primary objectives of this project are to learn how to plan and execute the Technology Scanning and Assessment (TSA) approach by conducting a project and to be able to provide the approach as a capability to the Chernobyl Nuclear Power Plant (ChNPP) and potentially elsewhere. A secondary objective is to learn specifics about decommissioning and in particular about radiological surveying to be performed prior to decommissioning to help ChNPP decision makers. TSA is a multi-faceted capability that monitors and analyzes scientific, technical, regulatory, and business factors and trends for decision makers and company leaders. It is a management tool where information is systematically gathered, analyzed, and used in business planning and decision making. It helps managers by organizing the flow of critical information and provides managers with information they can act upon. The focus of this TSA project is on radiological surveying with the target being ChNPP's Unit 1. This reactor was stopped on November 30, 1996. At this time, Ukraine failed to have a regulatory basis to provide guidelines for nuclear site decommissioning. This situation has not changed as of today. A number of documents have been prepared to become a basis for a combined study of the ChNPP Unit 1 from the engineering and radiological perspectives. The results of such a study are expected to be used when a detailed decommissioning plan is created.

  16. Comparing global models of terrestrial net primary productivity (NPP): Global pattern and differentiation by major biomes

    Science.gov (United States)

    Kicklighter, D.W.; Bondeau, A.; Schloss, A.L.; Kaduk, J.; McGuire, A.D.

    1999-01-01

    Annual and seasonal net primary productivity estimates (NPP) of 15 global models across latitudinal zones and biomes are compared. The models simulated NPP for contemporary climate using common, spatially explicit data sets for climate, soil texture, and normalized difference vegetation index (NDVI). Differences among NPP estimates varied over space and time. The largest differences occur during the summer months in boreal forests (50??to 60??N) and during the dry seasons of tropical evergreen forests. Differences in NPP estimates are related to model assumptions about vegetation structure, model parameterizations, and input data sets.

  17. Characterization of neutron field in a NPP workplace.

    Science.gov (United States)

    Breznik, B; Pochat, J L; Muller, H; Asselineau, B; Pavlin, M

    2007-01-01

    At the Krsko Nuclear Power Plant (NPP), albedo dosimeters are used for personal neutron dosimetry. Spectrometric measurements allow determination of reference dosimetric values of realistic neutron fields to be used for calibration of albedo dosimeters. The Laboratory for Neutron Metrology and Dosimetry from the Institute for Radiological Protection and Nuclear Safety (IRSN) was in charge of characterising neutron fields in the plant at two representative points with high neutron and gamma dose rate. Calibration of the dosimeters in the workplace used to be performed only by a spherical survey meter. Based on the reference dosimetric values, the Plant Dosimetry Laboratory has verified the response of albedo dosimeters.

  18. Application of Robotic System for Emergency Response in NPP

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kyung Min; Seo, Yong Chil; Shin, Ho Chul; Lee, Sung Uk; Cho, Jae Wan; Choi, Young Soo; Kim, Chang Hoi; Kim, Seung Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2010-10-15

    Increasing energy demand and concerns over climate change make increasing use of nuclear power plant in worldwide. Even though the probability of accident is greatly reduced, safety is the highest priority issue in the nuclear energy industry. Applying highly reliable and conservative 'defense in depth' concepts with the design and construction of NPP, there are very little possibilities with which accidents are occur and radioactive materials are released to environments in NPP. But NPP have prepared with the emergency response procedures and conduct exercises for post-accident circumstance according to the procedures. The application of robots for emergency response task for post-accident in nuclear facilities is not a new concept. Robots have been sent to recover the damaged reactor at Chernobyl where human workers could receive a lifetime dose of radiation in minutes. Based on NRC's TMI-2 Cleanup Program, several robots were built in the 1980s to help gather information and remove debris from a reactor at the Three Mile Island nuclear power plant that partially melted down in 1979. The first robot was lowered into the basement through a hatch and human operators monitoring in a control room drove it through mud, water and debris, capturing the initial post-accident images of the reactor's basement. It was used for several years equipped with various tools allowing it to scour surfaces, scoop samples and vacuum sludge. A second version carried a core sampler to determine the intensity and depth of the radiation that had permeated into the walls. To perform cleanup tasks, they built Workhorse that featured system redundancy and had a boom extendable to reach high places, but it was never used because it had too many complexities and to clean and fix. While remote robotics technology has proven to remove the human from the radioactive environment, it is also difficult to make it useful because it may requires skill about remote control and

  19. Status of steam generator tubing integrity at Jaslovske Bohunice NPP

    Energy Technology Data Exchange (ETDEWEB)

    Cepcek, S. [Nuclear Regulatory Authority of the Slovak Republic, Trnava (Slovakia)

    1997-02-01

    Steam generator represents one of the most important component of nuclear power plants. Especially, loss of tubing integrity of steam generators can lead to the primary coolant leak to secondary circuit and in worse cases to the unit shut down or to the PTS events occurrence. Therefore, to ensure the steam generator tubing integrity and the current knowledge about tube degradation propagation and development is of the highest importance. In this paper the present status of steam generator tubing integrity in operated NPP in Slovak Republic is presented.

  20. Effects of non-human species irradiation after the Chernobyl NPP accident.

    Science.gov (United States)

    Geras'kin, S A; Fesenko, S V; Alexakhin, R M

    2008-08-01

    The area affected by the Chernobyl Nuclear Power Plant accident in 1986 has become a unique test site where long-term ecological and biological consequences of a drastic change in a range of environmental factors as well as trends and intensity of selection are studied in natural settings. The consequences of the Chernobyl accident for biota varied from an enhanced rate of mutagenesis to damage at the ecosystem level. The review comprehensively brings together key data of the long-term studies of biological effects in plants and animals inhabiting over 20 years the Chernobyl NPP zone. The severity of radiation effects was strongly dependent on the dose received in the early period after the accident. The most exposed phytocenoses and soil animals' communities exhibited dose dependent alterations in the species composition and reduction in biological diversity. On the other hand, no decrease in numbers or taxonomic diversity of small mammals even in the most radioactive habitat was shown. In a majority of the studies, in both plant and animal populations from the Chernobyl zone, in the first years after the accident high increases in mutation rates were documented. In most cases the dose-effect relationships were nonlinear and the mutation rates per unit dose were higher at low doses and dose rates. In subsequent years a decline in the radiation background rate occurred faster than reduction in the mutation rate. Plant and animal populations have shown signs of adaptation to chronic exposure. In adaptation to the enhanced level of exposure an essential role of epigenetic mechanisms of gene expression regulation was shown. Based on the Chernobyl NPP accident studies, in the present review attempts were made to assess minimum doses at which ecological and biological effects were observed.

  1. Operational diagnostics of thermal state and efficiency of steam turbines of TPP and NPP

    Science.gov (United States)

    Bozhko, V. V.; Kovalenko, A. N.; Lyapunov, V. M.; Khomenok, L. A.

    2016-05-01

    Various ways for solving complex problems of the strength and operating life of steam turbines of TPP and NPP are studied. Diagnostic characters and technical possibilities for their control during the steam turbine operation are determined. It is shown that the effect of various factors on the reliability, maneuverability, and service life of power installations of TPP and NPP is generally determined by the thermal state of steam-electric generating sets. Leading foreign and domestic manufacturers give major attention to the organization of the control of the thermal state of facilities and the development of systems for accounting ("counter") the service life depletion. Zones of high-temperature sites of shafts and disks with maximum parameters of operating environment are determined. A model for on-line computation of thermal stresses with the diagnostic evaluation of the service life depletion (fatigue accumulation) and forecasting of optimum heating conditions for thermostressed turbine units is briefly stated. An example of a program for diagnostics of the quality of the facility operation is given. The program provides the operative control of thermal stresses and the service life depletion in main units of the turbine under various operation conditions, operates in the real-time mode, calculates and represents currents values of thermal stresses in turbine units, and forms and transmits into the industrial control signals on the occurrence of restrictions with respect to thermal stresses and prohibition of an increase or decrease in the vapor temperature and the load in the case of approaching pressures to maximum permissible ones. In the case of stationary operation conditions, the program computed the current efficiency in high (HPC) and mean (MPC) pressure cylinders.

  2. Development of NPP Monitoring and Operation Support Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Park, Jae Chang; Lee, Yong Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)] (and others)

    2008-04-15

    During the first stage (2001.7.1-2004.6.30), we developed general human factors design guidelines VDU-based workstations, PMAS alarm display design guidelines, PMAS SPADES display design guidelines, and the revision of KHNP HFE guidelines (HF-010), which have been applied to domestic NPP designs. We also supported other KNICS projects by performing RPS COM design reviews, development of RPS COM Style Guide, and a review of CEDMCS cabinet operator module display design. We developed the ADIOS prototype, NPP performance analysis systems for YGN No.1, 2 plants and Kori No. 2 plant, alarm cause tracking systems for Kori No. 2 plant and OPR1000, and signal fault detection and diagnosis methods for deaerators and steam generators. During the second stage(2004.7.1-2008.4.30), we supported other KNICS projects by reviewing RPS COM display designs three times, developing ESF-CCS COM style guides and reviewing ESF-CCS COM display design, reviewing CRCS LOM and PCS MTP display designs, and developing requirements for DCS GUI components. We also developed integrated style guide for I and C cabinet operator module display designs. In cooperative research with KOPEC-AE, we developed basic technologies for advanced HSI design including task analysis methods, an information and control requirements database, display design criteria, a HSI prototype with its evaluation, and methods for human factors engineering verification and validation.

  3. Suomi NPP VIIRS Reflective Solar Bands Operational Calibration Reprocessing

    Directory of Open Access Journals (Sweden)

    Slawomir Blonski

    2015-12-01

    Full Text Available Radiometric calibration coefficients for the VIIRS (Visible Infrared Imaging Radiometer Suite reflective solar bands have been reprocessed from the beginning of the Suomi NPP (National Polar-orbiting Partnership mission until present. An automated calibration procedure, implemented in the NOAA (National Oceanic and Atmospheric Administration JPSS (Joint Polar Satellite System operational data production system, was applied to reprocess onboard solar calibration data and solar diffuser degradation measurements. The latest processing parameters from the operational system were used to include corrected solar vectors, optimized directional dependence of attenuation screens transmittance and solar diffuser reflectance, updated prelaunch calibration coefficients without an offset term, and optimized Robust Holt-Winters filter parameters. The parameters were consistently used to generate a complete set of the radiometric calibration coefficients for the entire duration of the Suomi NPP mission. The reprocessing has demonstrated that the automated calibration procedure can be successfully applied to all solar measurements acquired from the beginning of the mission until the full deployment of the automated procedure in the operational processing system. The reprocessed calibration coefficients can be further used to reprocess VIIRS SDR (Sensor Data Record and other data products. The reprocessing has also demonstrated how the automated calibration procedure can be used during activation of the VIIRS instruments on the future JPSS satellites.

  4. Modernization and power upgrading of the Loviisa NPP

    Energy Technology Data Exchange (ETDEWEB)

    Keskinen, A. [IVO Power Engineering Ltd., Vantaa (Finland)

    1997-12-31

    In 1995, Imatran Voima Oy (IVO) started a project for modernization and power upgrading of the Loviisa NPP. The main objectives of the project are to ensure plant safety, to increase electricity production and to improve the expertise of the IVO staff. The total electricity output of Loviisa 1 and 2 units is planned to be increased by about 100 MW. This will be achieved through renovation of the steam turbines and through gradual increase in the thermal reactor power up to 1,500 MW from the present level of 1,375 MW. The Loviisa NPP Final Safety Analysis Report has been revised to a great extent in connection with the licensing process of the reactor power upgrading. The project also includes certain improvements in the primary and safety systems to ensure plant safety. The total cost estimate of the project is around 200 million FIM. The project implementation started in 1995 and in accordance with the plans in 2000 after several phases the last measures at power plant will be completed. (orig.). 4 refs.

  5. Nonvascular contribution to ecosystem NPP in a subarctic heath during early and late growing season

    DEFF Research Database (Denmark)

    Campioli, Matteo; Samson, Roeland; Michelsen, Anders

    2009-01-01

    Bryophytes and lichens abound in many arctic ecosystems and can contribute substantially to the ecosystem net primary production (NPP). Because of their growth seasonality and their potential for growth out of the growing season peak, bryophyte and lichen contribution to NPP may be particularly...

  6. Comparative analysis of NPP changes in global tropical forests from 2001 to 2013

    Science.gov (United States)

    Yin, S.; Li, X.; Wu, W.

    2017-02-01

    Net primary production (NPP) is the difference between total photosynthesis (gross primary production, GPP) and total plant respiration in an ecosystem. NPP is a key component of the terrestrial carbon cycle and is important in global climate research. Tropical forests, distributed mainly in Central Africa, Central and South America, and Southeast Asia, are among the most important ecosystems on earth. They are very important to analyses of the global carbon budget and to the projection of future climatic changes. In this study, we analyzed and compared the temporal and spatial changes of NPP within the three dominant areas of tropical forest from 2001 to 2013 by using data from the Moderate Resolution Imaging Spectroradiometer (MODIS). We found that Central and South America has the highest annual mean NPP, statistically, while the average NPP shows an increasing trend both in Central and South America and Central Africa but a decreasing trend in Southeast Asia.

  7. Degradation and Failure Characteristics of NPP Containment Protective Coating Systems

    Energy Technology Data Exchange (ETDEWEB)

    Sindelar, R.L.

    2001-02-22

    A research program to investigate the performance and potential for debris formation of Service Level I coating systems used in nuclear power plant containment is being performed at the Savannah River Technology Center. The research activities are aligned to address phenomena important to cause coating disbondment as identified by the Industry Coatings Expert Panel. The period of interest for performance covers the time from application of the coating through 40 years of service, followed by a medium-to-large break loss-of-coolant accident scenario, which is a design basis accident (DBA) scenario. The interactive program elements are described in this report and the application of these elements to evaluate the performance of the specific coating system of Phenoline 305 epoxy-phenolic topcoat over Carbozinc 11 primer on a steel substrate. This system is one of the predominant coating systems present on steel substrates in NPP containment.

  8. NPP VIIRS Early On-Orbit Geometric Performance

    Science.gov (United States)

    Wolfe, Robert E.; Lin, Guoqing; Nishihama, Masahiro; Tewari, Krishna; Montano, Enrique

    2012-01-01

    The NASA/NOAA Visible Infrared Imager Radiometer Suite (VIIRS) instrument on-board the Suomi National Polar-orbiting Partnership (NPP) satellite was launched in October, 2011. The instrument geometric performance includes sensor spatial response, band-to-band co-registration (BBR), and geolocation accuracy and precision. The geometric performance is an important aspect of sensor data record (SDR) calibration and validation. In this paper we will discuss geometric performance parameter characterization using the first seven-month of VIIRS' earth and lunar data, and compare with the at-launch performance using ground testing data and analysis of numerical modeling results as the first step in on-orbit geometric calibration and validation.

  9. Development of NPP personnel training system in Ukraine

    Energy Technology Data Exchange (ETDEWEB)

    Tarykin, V. [Operation Personnel Training Department, Khmelnitsky NPP, Training Center, Neteshin 30100, Khmelnitsky region (Ukraine)]. E-mail: tarykinv@ukr.net

    2005-07-01

    Modern personnel training and retraining system is a guarantee of NPPs safe reliable operation. Since the time when independence of Ukraine was proclaimed personnel training system was created directly at NPPs. This system is based on the latest legislation framework, developed subject to IAEA recommendations, gained international experience in the field of personnel training in view of increased demands to personnel qualification. Training Centers, formed at each plant, form one of the main components of NPP personnel training. Personnel training at Training Centers is performed in accordance with standard programmes. Simulator training base was created by joint efforts of specialists from the USA, Russia and Ukraine. Establishing manager training system and replacement reserves for National Nuclear Energy Generating Company 'ENERGOATOM' (NNEGC 'ENERGOATOM') managerial personnel, including training programme and training materials development, teacher selection and training, is under way. (author)

  10. MORE: Management of Requirements in NPP Modernisation Projects, final report

    Energy Technology Data Exchange (ETDEWEB)

    Fredriksen, R.; Katta, V.; Raspotnig, C. (Inst. for energiteknikk (IFE) (Norway)); Valkonen, J. (Technical Research Centre of Finland (VTT) (Finland))

    2008-09-15

    This report documents the work and related activities of the MORE (Management of Requirements in NPP Modernisation Projects) (NKS-R project number NKS-R-2005-47) project. This report also provides a summary of the project activities and deliverables, and discusses possible application areas. The project has aimed at the industrial utilisation of the results from the TACO: (Traceability and Communication of Requirements in Digital I and C Systems Development) (NKS-R project number NKS-R-2002-16, completed June, 2005) project, and practical application of improved approaches and methods for requirements engineering and change management. Finally, the report provides a brief description of the extended industrial network and disseminations of the results in Nordic and NKS related events such as seminars and workshops. (author)

  11. South Ukraine NPP: Safety improvements through Plant Computer upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Brenman, O. [Westinghouse Electric Company, 4350 Northern Pike, Monroeville, PA 15146 (United States); Chernyshov, M. A. [Westron, LLC, 1 Acad. Proskura St., Kharkiv 61070 (Ukraine); Denning, R. S. [Battelle, 505 King Ave, Columbus, OH 43201 (United States); Kolesov, S. A. [NAEK Energoatom, 3 Vetrov Str., Kiev, 01032 (Ukraine); Balakan, H. H.; Bilyk, B. I.; Kuznetsov, V. I. [PO South Ukraine NPP, NAEK Energoatom, Mylolayv Region, 55000 (Ukraine); Trosman, G. [US Dept. of Energy, International Nuclear Safety Program, Washington, DC 20585 (United States)

    2006-07-01

    This paper summarizes some results of the Plant Computer upgrade at the Units 2 and 3 of South Ukraine Nuclear Power Plant (NPP). A Plant Computer, which is also called the Computer Information System (CIS), is one of the key safety-related systems at VVER-1000 nuclear plants. The main function of the CIS is information support for the plant operators during normal and emergency operational modes. Before this upgrade, South Ukraine NPP operated out-of-date and obsolete systems. This upgrade project wax founded by the U.S. DOE in the framework of the International Nuclear Safety Program (INSP). The most efficient way to improve the quality and reliability of information provided to the plant operator is to upgrade the Human-System Interface (HSI), which is the Upper Level (UL) CIS. The upgrade of the CIS data-acquisition system (DAS), which is the Lower Level (LL) CIS, would have less effect on the unit safety. Generally speaking, the lifetime of the LL CIS is much higher than one of the UL CIS. Unlike Plant Computers at the Western-designed plants, the functionality of the WER-1000 CISs includes a control function (Centralized Protection Testing) and a number of the plant equipment monitoring functions, for example, Protection and Interlock Monitoring and Turbo-Generator Temperature Monitoring. The new system is consistent with a historical migration of the format by which information is presented to the operator away from the traditional graphic displays, for example, Piping and Instrument Diagrams (P and ID's), toward Integral Data displays. The cognitive approach to information presentation is currently limited by some licensing issues, but is adapted to a greater degree with each new system. The paper provides some lessons learned on the management of the international team. (authors)

  12. Application of Moessbauer spectroscopy on corrosion products of NPP

    Energy Technology Data Exchange (ETDEWEB)

    Dekan, J., E-mail: julius.dekan@stuba.sk; Lipka, J.; Slugen, V. [Institute of Nuclear and Physical Engineering, Faculty of Electrical Engineering and Information Technology, SUT (Slovakia)

    2013-04-15

    Steam generator (SG) is generally one of the most important components at all nuclear power plants (NPP) with close impact to safe and long-term operation. Material degradation and corrosion/erosion processes are serious risks for long-term reliable operation. Steam generators of four VVER-440 units at nuclear power plants V-1 and V-2 in Jaslovske Bohunice (Slovakia) were gradually changed by new original 'Bohunice' design in period 1994-1998, in order to improve corrosion resistance of SGs. Corrosion processes before and after these design and material changes in Bohunice secondary circuit were studied using Moessbauer spectroscopy during last 25 years. Innovations in the feed water pipeline design as well as material composition improvements were evaluated positively. Moessbauer spectroscopy studies of phase composition of corrosion products were performed on real specimens scrapped from water pipelines or in form of filters deposits. Newest results in our long-term corrosion study confirm good operational experiences and suitable chemical regimes (reduction environment) which results mostly in creation of magnetite (on the level 70 % or higher) and small portions of hematite, goethite or hydrooxides. Regular observation of corrosion/erosion processes is essential for keeping NPP operation on high safety level. The output from performed material analyses influences the optimisation of operating chemical regimes and it can be used in optimisation of regimes at decontamination and passivation of pipelines or secondary circuit components. It can be concluded that a longer passivation time leads more to magnetite fraction in the corrosion products composition.

  13. Decommissioning of the NPP Obrigheim (KWO). Shutdown/close-down of systems or components; Stilllegungsbetrieb der Anlage KWO Obrigheim. Ausserbetriebnahme / Stillsetzung von Systemen oder Anlagenteilen

    Energy Technology Data Exchange (ETDEWEB)

    Rausch, Eberhard H. [ISE Ingenieurgesellschaft fuer Stilllegung und Entsorgung mbH, Roedermark (Germany); Rudolf, Dieter [Energie Baden-Wuerttemberg AG (EnBW), Karlsruhe (Germany)

    2012-11-01

    As a consequence of the decommissioning of the NPP Obrigheim (KWO) the plant was transferred into the decommissioning operation, including the operation of several safety relevant systems and the storage of irradiation fuel elements. Actually, the fuel element have been removed from the reactor pressure vessel and the reactor building 01 and are now stored in an external fuel element storage pool at the NPP site. Most of the systems required for power operation have been shutdown (drained, depressurized, cold, and disconnected from operated systems). The operated systems exhibit significantly lower working pressure and temperatures compared to power operation. The shutdown is performed stepwise, for each system a shutdown plan has to be prepared, describing the scheduled measures. The presentation includes details of the work flow of the performed and planned system shutdown.

  14. Suggestion of a Framework to Analyze Failure Modes and Effect of Cyber Attacks in NPP

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chan Young; Seong, Poong Hyun [KAIST, Daejeon (Korea, Republic of)

    2016-05-15

    The cyber security issue on NPP is inevitable issue. Unlike general cyber security, cyber-physical system like NPP can induce serious consequences such as core damage by cyber-attack. So in this paper, to find how hacker can attack the NPP, (1) PSA results were utilized to find the relationship between physical system and cyber-attack and (2) vulnerabilities on digital control systems were investigated to find how hacker can implement the possible attack. It is expected that these steps are utilized when establishing penetration test plans or cyber security drill plans.

  15. Information theory-based approach for modeling the cognitive behavior of NPP operators

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Hyun; Seong, Poong Hyun [KAIST, Taejon (Korea, Republic of)

    2001-10-01

    An NPP system consists of three important components: the machine system, operators, and MMI. Through the MMI, operators monitor and control the plant system. The cognitive model of NPP operators has become a target of modeling by cognitive engineers due to their work environment: complex, uncertain, and safe critical. We suggested the contextual model for the cognitive behavior of NPP operator and the mathematical fundamentals based on information theory which can quantify the model. The demerit of the methodology using the information theory is that it cannot evaluate the correctness and quality of information. Therefore, the validation through the experiment is needed.

  16. Porcine ecto-nucleotide pyrophosphatase/phosphodiesterase 1 (NPP1/CD203a)

    DEFF Research Database (Denmark)

    Petersen, Cathrine Bie; Hillig, Ann-Britt Nygaard; Viuff, Birgitte;

    2007-01-01

    /phosphodiesterase 1 (NPP1/CD203a). The porcine NPP1/CD203a encoding gene was mapped to chromosome 1 using a radiation hybrid panel, and transcription was investigated by RT-PCR analysis of several tissues. The cDNA was cloned and introduced into COS7 cells resulting in expression of functionally active enzyme...... and verification of the specificity of an SWC9 reacting monoclonal antibody. The antibody was used for immunohistochemical examination of various porcine tissues. Most prominent expression of NPP1/CD203a was found in lung macrophages and liver sinusoids....

  17. Site-level evaluation of satellite-based global terrestrial gross primary production and net primary production monitoring.

    Science.gov (United States)

    David P. Turner; William D. Ritts; Warren B. Cohen; Thomas K. Maeirsperger; Stith T. Gower; Al A. Kirschbaum; Steve W. Runnings; Maosheng Zhaos; Steven C. Wofsy; Allison L. Dunn; Beverly E. Law; John L. Campbell; Walter C. Oechel; Hyo Jung Kwon; Tilden P. Meyers; Eric E. Small; Shirley A. Kurc; John A. Gamon

    2005-01-01

    Operational monitoring of global terrestrial gross primary production (GPP) and net primary production (NPP) is now underway using imagery from the satellite-borne Moderate Resolution Imaging Spectroradiometer (MODIS) sensor. Evaluation of MODIS GPP and NPP products will require site-level studies across a range of biomes, with close attention to numerous scaling...

  18. Calculation of Wind Speeds for Return Period Using Weibull Parameter: A Case Study of Hanbit NPP Area

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jongk Uk; Lee, Kwan Hee; Kim, Sung Il; Yook, Dae Sik; Ahn, Sang Myeon [KINS, Daejeon (Korea, Republic of)

    2016-05-15

    Evaluation of the meteorological characteristics at the nuclear power plant and in the surrounding area should be performed in determining the site suitability for safe operation of the nuclear power plant. Under unexpected emergency condition, knowledge of meteorological information on the site area is important to provide the basis for estimating environmental impacts resulting from radioactive materials released in gaseous effluents during the accident condition. In the meteorological information, wind speed and direction are the important meteorological factors for examination of the safety analysis in the nuclear power plant area. Wind characteristics was analyzed on Hanbit NPP area. It was found that the Weibull parameters k and c vary 2.56 to 4.77 and 4.53 to 6.79 for directional wind speed distribution, respectively. Maximum wind frequency was NE and minimum was NNW.

  19. Tracking on-orbit stability of the response versus scan angle for the S-NPP VIIRS reflective solar bands

    Science.gov (United States)

    Wu, Aisheng; Xiong, Xiaoxiong (Jack); Cao, Changyong

    2016-09-01

    Built on strong heritage of the MODIS (Moderate Resolution Imaging Spectroradiometer) sensor, the Visible Infrared Imaging Radiometer Suite (VIIRS) carried on Suomi NPP (National Polar-orbiting Partnership) satellite (http://npp.gsfc.nasa.gov/viirs.html) has been in operation for nearly five fives. The on-board calibration of the VIIRS reflective solar bands (RSB) relies on a solar diffuser (SD) located at a fixed scan angle and a solar diffuser stability monitor (SDSM). The VIIRS response versus scan angle (RVS) was characterized prelaunch in lab ambient conditions and is currently used to determine the on orbit response for all scan angles relative to the SD scan angle. Since the RVS is vitally important to the quality of calibrated level 1B products, it is important to monitor its on-orbit stability. In this study, the RVS stability is examined based on reflectance trends collected from 16-day repeatable orbits over preselected pseudo-invariant desert sites in Northern Africa. These trends cover nearly entire Earth view scan range so that any systematic drifts in the scan angle direction would indicate a change in RVS. This study also compares VIIRS RVS on-orbit stability results with those from Aqua and Terra MODIS over the first four years of mission for a few selected bands, which provides further information on potential VIIRS RVS on-orbit changes.

  20. VIIRS Climate Raw Data Record (C-RDR) from Suomi NPP, Version 1

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Suomi NPP Climate Raw Data Record (C-RDR) developed at the NOAA NCDC is an intermediate product processing level (NOAA Level 1b) between a Raw Data Record (RDR)...

  1. Assessment of NPP VIIRS Ocean Color Data Products: Hope and Risk

    Science.gov (United States)

    Turpie, Kevin R.; Meister, Gerhard; Eplee, Gene; Barnes, Robert A.; Franz, Bryan; Patt, Frederick S.; Robinson, Wayne d.; McClain, Charles R.

    2010-01-01

    For several years, the NASA/Goddard Space Flight Center (GSFC) NPP VIIRS Ocean Science Team (VOST) provided substantial scientific input to the NPP project regarding the use of Visible Infrared Imaging Radiometer Suite (VIIRS) to create science quality ocean color data products. This work has culminated into an assessment of the NPP project and the VIIRS instrument's capability to produce science quality Ocean Color data products. The VOST concluded that many characteristics were similar to earlier instruments, including SeaWiFS or MODIS Aqua. Though instrument performance and calibration risks do exist, it was concluded that programmatic and algorithm issues dominate concerns. Keywords: NPP, VIIRS, Ocean Color, satellite remote sensing, climate data record.

  2. The kinetics of aerosol particle formation and removal in NPP severe accidents

    Science.gov (United States)

    Zatevakhin, Mikhail A.; Arefiev, Valentin K.; Semashko, Sergey E.; Dolganov, Rostislav A.

    2016-06-01

    Severe Nuclear Power Plant (NPP) accidents are accompanied by release of a massive amount of energy, radioactive products and hydrogen into the atmosphere of the NPP containment. A valid estimation of consequences of such accidents can only be carried out through the use of the integrated codes comprising a description of the basic processes which determine the consequences. A brief description of a coupled aerosol and thermal-hydraulic code to be used for the calculation of the aerosol kinetics within the NPP containment in case of a severe accident is given. The code comprises a KIN aerosol unit integrated into the KUPOL-M thermal-hydraulic code. Some features of aerosol behavior in severe NPP accidents are briefly described.

  3. Problems of NPP construction project standardization and operational safety increase in the USA

    Energy Technology Data Exchange (ETDEWEB)

    Gudkov, Yu.V.

    1980-01-01

    Main causes of slackening paces of the USA nuclear power engineering development are considered using the experience of the USA NPP design, construction and operation. Data on increase in capital investments for the NPP construction and variation of their structure to enhancing waste of capital are given. Problems of improvement of operational safety of water-cooled and water-moderated reactors as well as NPP separate assemblies are considered. Ways for reducing periods of NPP design realization are described taking as an example the USA leading power, construction and reactor construction companies. It is shown that the optimization of existing methods for designing NPPs and nuclear reactor structures, systems for construction management and control as well as complex standartization of equipment, construction methods and operational procedures for NPPs are main factors.

  4. Observation and modeling of NPP for Pinus elliottii plantation in subtropical China

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Based on the stem analysis of 59 individuals of Pinus elliottii in combination with tree biomass models, we calculated annual biomass increment of forest plots at Qianyanzhou Ecological Station, Chinese Academy of Sciences in subtropical China. In addition, canopy layer and community NPP were calcu- lated based on 12 years’ litter fall data. NPP of the 21-year-old forest was estimated by using the BIOME BGC model; and both measured NPP and estimated NPP were compared with flux data. Community biomass was 10574 g·m-2; its distribution patterns in tree layer, shrub layer, herbaceous layer, tree root, herbaceous and shrub roots and fine roots were 7542, 480, 239, 1810, 230, 274 and 239 g·m-2, respectively. From 1999 to 2004, the average annual growth rate and litter fall were 741 g·m-2·a-1 (381.31 gC·m-2·a-1) and 849 g·m?2·a?1 (463 gC·m-2·a-1), respectively. There was a significant corre- lation between annual litter fall and annual biomass increment; and the litter fall was 1.19 times the biomass increment of living trees. From 1985 to 2005, average NPP and GPP values based on BGC modeling were 630.88 (343.31 - 906.42 gC·m-2·a-1) and 1 800 gC·m-2·a-1 (1351.62 - 2318.26 gC·m-2·a-1). Regression analysis showed a linear relationship (R2=0.48) between the measured and simulated tree layer NPP values. NPP accounted for 30.2% (25.6%-32.9%) of GPP, while NEP ac- counted for 57.5% (48.1%-66.5%) of tree-layer NPP and 41.74% (37%-52%) of stand NPP. Soil respi- ration accounted for 77.0% of measured tree NPP and 55.9% of the measured stand NPP. NEE based on eddy covariance method was 12.97% higher than the observed NEP.

  5. Monitoring Bio-Optical Processes Using NPP-VIIRS and MODIS-Aqua Ocean Color Products

    Science.gov (United States)

    2013-01-01

    Same day ocean color products from the S-NPP and MODIS provide for a new capability to monitor changes in the bio - optical processes occurring in...coastal waters. The combined use of multiple looks per day from several sensors can be used to follow the water mass changes of bio -optical properties...day to resolve bio - optical processes. We examine how these changes in bio -optical properties can be monitored using the NPP and MODIS ocean color

  6. Development of NPP Safety Requirements into Kenya's Grid Codes

    Energy Technology Data Exchange (ETDEWEB)

    Ndirangu, Nguni James; Koo, Chang Choong [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-10-15

    As presently drafted, Kenya's grid codes do not contain any NPP requirements. Through case studies of selected grid codes, this paper will study frequency, voltage and fault ride through requirements for NPP connection and operation, and offer recommendation of how these requirements can be incorporated in the Kenya's grid codes. Voltage and frequency excursions in Kenya's grid are notably frequently outside the generic requirement and the values observed by the German and UK grid codes. Kenya's grid codes require continuous operation for ±10% of nominal voltage and 45.0 to 52Hz on the grid which poses safety issues for an NPP. Considering stringent NPP connection to grid and operational safety requirements, and the importance of the TSO to NPP safety, more elaborate requirements need to be documented in the Kenya's grid codes. UK and Germany have a history of meeting high standards of nuclear safety and it is therefore recommended that format like the one in Table 1 to 3 should be adopted. Kenya's Grid code considering NPP should have: • Strict rules for voltage variation, that is, -5% to +10% of the nominal voltage • Strict rules for frequency variation, that is, 48Hz to 52Hz of the nominal frequencyand.

  7. Analysis of radwaste management alternatives during dismantling of Ignalina NPP systems with low level contamination

    Energy Technology Data Exchange (ETDEWEB)

    Poskas, Gintautas [Lithuanian Energy Institute, Kaunas (Lithuania). Nuclear Engineering Lab.; Kaunas Univ. of Technology (Lithuania); Poskas, Povilas; Simonis, Audrius [Lithuanian Energy Institute, Kaunas (Lithuania). Nuclear Engineering Lab.

    2013-12-15

    Ignalina NPP was operating two RBMK-1500 reactors which are under decommissioning now. In this paper, analysis on radwaste management alternatives during the dismantling of systems with low level contamination and different types of components in buildings 117/1 and V1 are presented. After situation analysis and collection of the primary information related to components' physical and radiological characteristics, location and other data, two alternatives for radwaste management during the dismantling were formulated and evaluated: the first one (A1) when the decontamination of the dismantled components is performed (if it is reasonable), and the second one (A2) when no decontamination of the dismantled components is performed and after the dismantling, the components are routed to appropriate waste storage or disposal sites. To select the preferable alternative, MCDA method - AHP (Analytic Hierarchy Process) is applied. Hierarchical lists of decision criteria, necessary for assessment of alternatives performance, are formulated. Quantitative decision criteria values for these alternatives are calculated using software DECRAD, which was developed by Lithuanian Energy Institute Nuclear Engineering Laboratory. Qualitative decision criteria are evaluated using expert judgment. Analysis results show that alternative A1 has a preference against alternative A2. (orig.)

  8. Analysis of Steam Generators Corrosion Products from Slovak NPP Bohunice

    Directory of Open Access Journals (Sweden)

    Jarmila Degmová

    2012-01-01

    Full Text Available One of the main goals of the nuclear industry is to increase the nuclear safety and reliability of nuclear power plants (NPPs. As the steam generator (SG is the most corrosion sensitive component of NPPs, it is important to analyze the corrosion process and optimize its construction materials to avoid damages like corrosion cracking. For this purpose two different kinds of SGs and its feed water distributing systems from the NPP Jaslovske Bohunice were studied by nondestructive Mössbauer spectroscopy. The samples were scraped from the surface and analyzed in transmission geometry. Magnetite and hematite were found to be the main components in the corrosion layers of both SGs. Dependant of the material the SG consisted of, and the location in the system where the samples were taken, the ratios between magnetite and hematite and the paramagnetic components were different. The obtained results can be used to improve corrosion safety of the VVER-440 secondary circuit as well as to optimize its water chemistry regime.

  9. Derived Land Surface Emissivity From Suomi NPP CrIS

    Science.gov (United States)

    Zhou, Daniel K.; Larar, Allen M.; Liu, Xu

    2012-01-01

    Presented here is the land surface IR spectral emissivity retrieved from the Cross-track Infrared Sounder (CrIS) measurements. The CrIS is aboard the Suomi National Polar-orbiting Partnership (NPP) satellite launched on October 28, 2011. We describe the retrieval algorithm, demonstrate the surface emissivity retrieved with CrIS measurements, and inter-comparison with the Infrared Atmospheric Sounding Interferometer (IASI) emissivity. We also demonstrate that surface emissivity from satellite measurements can be used in assistance of monitoring global surface climate change, as a long-term measurement of IASI and CrIS will be provided by the series of EUMETSAT MetOp and US Joint Polar Satellite System (JPSS) satellites. Monthly mean surface properties are produced using last 5-year IASI measurements. A temporal variation indicates seasonal diversity and El Nino/La Nina effects not only shown on the water but also on the land. Surface spectral emissivity and skin temperature from current and future operational satellites can be utilized as a means of long-term monitoring of the Earth's environment. CrIS spectral emissivity are retrieved and compared with IASI. The difference is small and could be within expected retrieval error; however it is under investigation.

  10. Nitrogen Limitation is Reducing the Enhancement of NPP by Elevated CO2 in a Deciduous Forest

    Energy Technology Data Exchange (ETDEWEB)

    Norby, Richard J [ORNL; Warren, Jeffrey [ORNL; Iversen, Colleen M [ORNL; Medlyn, Belinda [Macquarie University; McMurtrie, Ross [University of New South Wales; Hoffman, Forrest M [ORNL

    2008-01-01

    Accurate model representation of the long-term response of forested ecosystems to elevated atmospheric CO2 concentrations (eCO2) is important for predictions of future concentrations of CO2. For biogeochemical models that predict the response of net primary productivity (NPP) to eCO2, free-air CO2 enrichment (FACE) experiments provide the only source of data for comparison. A synthesis of forest FACE experiments reported a 23% increase in NPP in eCO2, and this result has been used as a model benchmark. Here, we provide new evidence from a FACE experiment in a deciduous forest in Tennessee that N limitation has significantly reduced the stimulation of NPP by eCO2, consistent with predictions from ecosystem and global models that incorporate N feedbacks. The Liquidambar styraciflua stand has been exposed to current ambient atmospheric CO2 or air enriched with CO2 to 550 ppm since 1998. Results from the first 6 years of the experiment indicated that NPP was significantly enhanced by eCO2 and that this was a consistent and sustained response. Now, with 10 years of data, our analysis must be revised. The response of NPP to eCO2 has declined from 24% in 2001-2003 to 9% in 2007. The diminishing response to eCO2 since 2004 coincides with declining NPP in ambient CO2 plots. Productivity of this forest stand is limited by N availability, and the steady decline in forest NPP is closely related to changes in the N economy, as evidenced by declining foliar N concentrations. There is a strong linear relationship between foliar [N] and NPP, and the steeper slope in eCO2 indicates that the NPP response to eCO2 should diminish as foliar N declines. Increased fine-root production and root proliferation deeper in the soil have sustained N uptake, but not to an extent sufficient to benefit aboveground production. The mechanistic basis of the N effect on NPP resides in the photosynthetic machinery. The linear relationships between Jmax and Vcmax with foliar [N] did not change from 1998

  11. Nitrogen Limitation is Reducing the Enhancement of NPP by Elevated CO2 in a Deciduous Forest

    Science.gov (United States)

    Norby, R. J.; Warren, J. M.; Iversen, C. M.; Medlyn, B. E.; McMurtrie, R. E.; Hoffman, F. M.

    2008-12-01

    Accurate model representation of the long-term response of forested ecosystems to elevated atmospheric CO2 concentrations (eCO2) is important for predictions of future concentrations of CO2. For biogeochemical models that predict the response of net primary productivity (NPP) to eCO2, free-air CO2 enrichment (FACE) experiments provide the only source of data for comparison. A synthesis of forest FACE experiments reported a 23% increase in NPP in eCO2, and this result has been used as a model benchmark. Here, we provide new evidence from a FACE experiment in a deciduous forest in Tennessee that N limitation has significantly reduced the stimulation of NPP by eCO2, consistent with predictions from ecosystem and global models that incorporate N feedbacks. The Liquidambar styraciflua stand has been exposed to current ambient atmospheric CO2 or air enriched with CO2 to 550 ppm since 1998. Results from the first 6 years of the experiment indicated that NPP was significantly enhanced by eCO2 and that this was a consistent and sustained response. Now, with 10 years of data, our analysis must be revised. The response of NPP to eCO2 has declined from 24% in 2001-2003 to 9% in 2007. The diminishing response to eCO2 since 2004 coincides with declining NPP in ambient CO2 plots. Productivity of this forest stand is limited by N availability, and the steady decline in forest NPP is closely related to changes in the N economy, as evidenced by declining foliar N concentrations. There is a strong linear relationship between foliar [N] and NPP, and the steeper slope in eCO2 indicates that the NPP response to eCO2 should diminish as foliar N declines. Increased fine-root production and root proliferation deeper in the soil have sustained N uptake, but not to an extent sufficient to benefit aboveground production. The mechanistic basis of the N effect on NPP resides in the photosynthetic machinery. The linear relationships between Jmax and Vcmax with foliar [N] did not change from 1998

  12. Modification of the Decontamination Facility at the Kruemmel NPP - 13451

    Energy Technology Data Exchange (ETDEWEB)

    Klute, Stefan; Kupke, Peter [Siempelkamp Nukleartechnik GmbH Am Taubenfeld 25/1, 69123 Heidelberg (Germany)

    2013-07-01

    In February 2009, Siempelkamp Nukleartechnik GmbH was awarded the contract for the design, manufacture, delivery and construction of a new Decontamination Facility in the controlled area for Kruemmel NPP. The new decontamination equipment has been installed according to the state of art of Kruemmel NPP. The existing space required the following modification, retrofitting and reconstruction works: - Demounting of the existing installation: to create space for the new facility it was necessary to dismantle the old facility. The concrete walls and ceilings were cut into sizes of no more than 400 kg for ease of handling. This enabled decontamination so largest possible amount could be released for recycling. All steel parts were cut into sizes fitting for iron-barred boxes, respecting the requirement to render the parts decontaminable and releasable. - Reconstructing a decontamination facility: Reconstruction of a decontamination box with separate air lock as access area for the decontamination of components and assemblies was conducted using pressurized air with abrasives (glass beads or steel shots). The walls were equipped with sound protection, the inner walls were welded gap-free to prevent the emergence of interstices and were equipped with changeable wear and tear curtains. Abrasive processing unit positioned underneath the dry blasting box adjacent to the two discharge hoppers. A switch has been installed for the separation of the glass beads and the steel shot. The glass beads are directed into a 200 l drum for the disposal. The steel shot was cleaned using a separator. The cleaned steel shot was routed via transportation devices to the storage container, making it available for further blasting operations. A decontamination box with separate air lock as access area for the decontamination of components and assemblies using high pressure water technology was provided by new construction. Water pressures between 160 bar and 800 bar can be selected. The inner

  13. Validation of S-NPP VIIRS Sea Surface Temperature Retrieved from NAVO

    Directory of Open Access Journals (Sweden)

    Qianguang Tu

    2015-12-01

    Full Text Available The validation of sea surface temperature (SST retrieved from the new sensor Visible Infrared Imaging Radiometer Suite (VIIRS onboard the Suomi National Polar-Orbiting Partnership (S-NPP Satellite is essential for the interpretation, use, and improvement of the new generation SST product. In this study, the magnitude and characteristics of uncertainties in S-NPP VIIRS SST produced by the Naval Oceanographic Office (NAVO are investigated. The NAVO S-NPP VIIRS SST and eight types of quality-controlled in situ SST from the National Oceanic and Atmospheric Administration in situ Quality Monitor (iQuam are condensed into a Taylor diagram. Considering these comparisons and their spatial coverage, the NAVO S-NPP VIIRS SST is then validated using collocated drifters measured SST via a three-way error analysis which also includes SST derived from Moderate Resolution Imaging Spectro-radiometer (MODIS onboard AQUA. The analysis shows that the NAVO S-NPP VIIRS SST is of high accuracy, which lies between the drifters measured SST and AQUA MODIS SST. The histogram of NAVO S-NPP VIIRS SST root-mean-square error (RMSE shows normality in the range of 0–0.6 °C with a median of ~0.31 °C. Global distribution of NAVO VIIRS SST shows pronounced warm biases up to 0.5 °C in the Southern Hemisphere at high latitudes with respect to the drifters measured SST, while near-zero biases are observed in AQUA MODIS. It means that these biases may be caused by the NAVO S-NPP VIIRS SST retrieval algorithm rather than the nature of the SST. The reasons and correction for this bias need to be further studied.

  14. Handling of damaged spent fuel at Ignalina NPP

    Energy Technology Data Exchange (ETDEWEB)

    Ziehm, Ronny [NUKEM Technologies GmbH (Germany); Bechtel, Sascha [Hoefer und Bechtel GmbH (Germany)

    2012-11-01

    The Ignalina Nuclear Power Plant (INPP) is situated in the north-eastern part of Lithuania close to the borders with Latvia and Belarus and on the shore of Lake Druksiai. It is approximately 120 km from the capital city Vilnius. The power plant has two RMBK type water cooled graphite moderated pressure tube reactors each of design capacity 1500MW(e). The start of operation of the Unit 1 was in 1983 and of the Unit 2 in 1987. In the period 1987 - 1991 (i.e. Soviet period) a small proportion of the existing spent nuclear fuel suffered minor to major damages. In the frame of decommissioning of INPP it is necessary that this damaged fuel is retrieved from the storage pools and stored in an interim spent fuel store. NUKEM Technologies GmbH (Germany) as part of a consortium with GNS mbH (Germany) was awarded the contract for an Interim Spent Fuel Storage Facility (B1- ISFSF). This contract includes the design, procurement, manufacturing, supply and installation of a damaged fuel handling system (DFHS). Objective of this DFHS is the safe handling of spent nuclear fuel with major damages, which result in rupture of the cladding and potential loss of fuel pellets from within the cladding. Typical damages are bent fuel bundle skeletons, broken fuel rods, missing or damaged end plugs, very small gaps between fuel bundles, bent central rods between fuel bundles. The presented concept is designed for Ignalina NPP. However, the design is developed more generally to solve these problems with damaged fuel at other nuclear power plants applying these proven techniques. (orig.)

  15. An overview of Suomi NPP VIIRS calibration maneuvers

    Science.gov (United States)

    Butler, James J.; Xiong, Xiaoxiong; Barnes, Robert A.; Patt, Frederick S.; Sun, Junqiang; Chiang, Kwofu

    2012-09-01

    The first Visible Infrared Imager Radiometer Suite (VIIRS) instrument was successfully launched on-board the Suomi National Polar-orbiting Partnership (SNPP) spacecraft on October 28, 2011. Suomi NPP VIIRS observations are made in 22 spectral bands, from the visible (VIS) to the long-wave infrared (LWIR), and are used to produce 22 Environmental Data Records (EDRs) with a broad range of scientific applications. The quality of these VIIRS EDRs strongly depends on the quality of its calibrated and geo-located Sensor Date Records (SDRs). Built with a strong heritage to the NASA's EOS MODerate resolution Imaging Spectroradiometer (MODIS) instrument, the VIIRS is calibrated on-orbit using a similar set of on-board calibrators (OBC), including a solar diffuser (SD) and solar diffuser stability monitor (SDSM) system for the reflective solar bands (RSB) and a blackbody (BB) for the thermal emissive bands (TEB). Onorbit maneuvers of the SNPP spacecraft provide additional calibration and characterization data from the VIIRS instrument which cannot be obtained pre-launch and are required to produce the highest quality SDRs. These include multiorbit yaw maneuvers for the characterization of SD and SDSM screen transmission, quasi-monthly roll maneuvers to acquire lunar observations to track sensor degradation in the visible through shortwave infrared, and a driven pitch-over maneuver to acquire multiple scans of deep space to determine TEB response versus scan angle (RVS). This paper provides an overview of these three SNPP calibration maneuvers. Discussions are focused on their potential calibration and science benefits, pre-launch planning activities, and on-orbit scheduling and implementation strategies. Results from calibration maneuvers performed during the Intensive Calibration and Validation (ICV) period for the VIIRS sensor are illustrated. Also presented in this paper are lessons learned regarding the implementation of calibration spacecraft maneuvers on follow

  16. Suomi-NPP VIIRS Solar Diffuser Stability Monitor Performance

    Science.gov (United States)

    Fulbright, Jon; Lei, Ning; Efremova, Boryana; Xiong, Xiaoxiong

    2015-01-01

    When illuminated by the Sun, the onboard solar diffuser (SD) panel provides a known spectral radiance source to calibrate the reflective solar bands of the Visible Infrared Imaging Radiometer Suite on the Suomi-NPP satellite. The SD bidirectional reflectance distribution function (BRDF) degrades over time due to solar exposure, and this degradation is measured using the SD stability monitor (SDSM). The SDSM acts as a ratioing radiometer, comparing solar irradiance measurements off the SD panel to those from a direct Sun view. We discuss the design and operations of the SDSM, the SDSM data analysis, including improvements incorporated since launch, and present the results through 1000 days after launch. After 1000 days, the band-dependent H-factors, a quantity describing the relative degradation of the BRDF of the SD panel since launch, range from 0.716 at 412 nanometers to 0.989 at 926 nanometers. The random uncertainty of these H-factors is about 0.1 percent, which is confirmed by the similar standard deviation values computed from the residuals of quadratic exponential fits to the H-factor time trends. The SDSM detector gains have temperature sensitivity of up to about 0.36 percent per kelvin, but this does not affect the derived H-factors. An initial error in the solar vector caused a seasonal bias to the H-factors of up to 0.5 percent. The total exposure of the SD panel to UV light after 1000 orbits is equivalent to about 100 hours of direct sunlight illumination perpendicular to the SD panel surface.

  17. An initial assessment of Suomi NPP VIIRS vegetation index EDR

    Science.gov (United States)

    Vargas, M.; Miura, T.; Shabanov, N.; Kato, A.

    2013-11-01

    The Suomi National Polar-orbiting Partnership (S-NPP) satellite with Visible/Infrared Imager/Radiometer Suite (VIIRS) onboard was launched in October 2011. VIIRS is the primary instrument for a suite of Environmental Data Records (EDR), including Vegetation Index (VI) EDR, for weather forecasting and climate research. The VIIRS VI EDR operational product consists of the Top of the Atmosphere (TOA) Normalized Difference Vegetation Index (NDVI), the Top of the Canopy (TOC) Enhanced Vegetation Index (EVI), and per-pixel product quality information. In this paper, we report results of our assessment of the early VIIRS VI EDR (beta quality) using Aqua MODIS and NOAA-18 AVHRR/3 as a reference for May 2012 to March 2013. We conducted two types of analyses focused on an assessment of physical (global scale) and radiometric (regional scale) performances of VIIRS VI EDR. Both TOA NDVI and TOC EVI of VIIRS showed spatial and temporal trends consistent with the MODIS counterparts, whereas VIIRS TOA NDVI was systematically higher than that of AVHRR. Performance of the early VIIRS VI EDR was limited by a lack of adequate per-pixel quality information, commission/omission errors of the cloud mask, and uncertainties associated with the surface reflectance retrievals. A number of enhancements to the VI EDR are planned, including: (1) implementation of a TOC EVI back-up algorithm, (2) addition of more detailed quality flags on aerosols, clouds, and snow cover, and (3) implementation of gridding and temporal compositing. A web-based, product quality monitoring tool has been developed and automated product validation protocols are being prototyped.

  18. Using Ground Targets to Validate S-NPP VIIRS Day-Night Band Calibration

    Directory of Open Access Journals (Sweden)

    Xuexia Chen

    2016-11-01

    Full Text Available In this study, the observations from S-NPP VIIRS Day-Night band (DNB and Moderate resolution bands (M bands of Libya 4 and Dome C over the first four years of the mission are used to assess the DNB low gain calibration stability. The Sensor Data Records produced by NASA Land Product Evaluation and Algorithm Testing Element (PEATE are acquired from nearly nadir overpasses for Libya 4 desert and Dome C snow surfaces. A kernel-driven bidirectional reflectance distribution function (BRDF correction model is used for both Libya 4 and Dome C sites to correct the surface BRDF influence. At both sites, the simulated top-of-atmosphere (TOA DNB reflectances based on SCIAMACHY spectral data are compared with Land PEATE TOA reflectances based on modulated Relative Spectral Response (RSR. In the Libya 4 site, the results indicate a decrease of 1.03% in Land PEATE TOA reflectance and a decrease of 1.01% in SCIAMACHY derived TOA reflectance over the period from April 2012 to January 2016. In the Dome C site, the decreases are 0.29% and 0.14%, respectively. The consistency between SCIAMACHY and Land PEATE data trends is good. The small difference between SCIAMACHY and Land PEATE derived TOA reflectances could be caused by changes in the surface targets, atmosphere status, and on-orbit calibration. The reflectances and radiances of Land PEATE DNB are also compared with matching M bands and the integral M bands based on M4, M5, and M7. The fitting trends of the DNB to integral M bands ratios indicate a 0.75% decrease at the Libya 4 site and a 1.89% decrease at the Dome C site. Part of the difference is due to an insufficient number of sampled bands available within the DNB wavelength range. The above results indicate that the Land PEATE VIIRS DNB product is accurate and stable. The methods used in this study can be used on other satellite instruments to provide quantitative assessments for calibration stability.

  19. Towards remote sensing of Arctic ice roads and associated human activities using SUOMI NPP night light images

    Science.gov (United States)

    Bennett, M.; Smith, L. C.; Stephenson, S. R.

    2014-12-01

    Ice roads are often the only cost-effective means of transporting goods and supplies to communities, mines, and other sites in remote parts of the Arctic. Yet, there is no global dataset for Arctic ice roads. However, remotely sensed images from the SUOMI NPP day/night band (DNB) of the Visible Infrared Imaging Radiometer Suite (VIIRS) may allow for the construction of such a dataset. The DNB's high sensitivity to low-level light suggests that while it is not feasible to view ice roads at night per se, other prominent features associated with ice roads can serve as proxies. Using a time series of images taken in winter 2012, 2013, and 2014, SUOMI NPP images are compared with Landsat 8 images and an existing map of the Tibbitt to Contwoyto ice road in the Northwest Territories and Nunavut, Canada. First results reveal that while the ice road's exact path cannot be discerned, key points of human activity along the way can be made out. This bodes well for future applications of DNB imagery to detect ice roads in places like the Russian Federation, for which there is a dearth of publicly available maps. Knowing the location of ice roads is important for two reasons. First, these data can signal sites of natural resource extraction in places for which information is not widely disseminated, such as in the Russian Far East. Second, new geospatial datasets for ice roads can be combined with models assessing impacts of climate change on circumpolar land accessibility (Stephenson et al. 2011) in order to understand where the structural integrity of ice roads may be at risk. As warming temperatures threaten to shorten the season for ice roads, communities and mines alike will need to prepare for changes to their transportation infrastructure, made out of the changing landscape itself.

  20. Variations and trends of terrestrial NPP and its relation to climate change in the 10 CMIP5 models

    Indian Academy of Sciences (India)

    Suosuo Li; Shihua Lü; Yuanpu Liu; Yanhong Gao; Yinhuan Ao

    2015-03-01

    Using global terrestrial ecosystem net primary productivity (NPP) data, we validated the simulated multi-model ensemble (MME) NPP, analyzed the spatial distribution of global NPP and explored the relationship between NPP and climate variations in historical scenarios of 10 CMIP5 models. The results show that the global spatial pattern of simulated terrestrial ecosystem NPP, is consistent with IGBP NPP, but the values have some differences and there is a huge uncertainty. Considering global climate change, near surface temperature is the major factor affecting the terrestrial ecosystem, followed by the precipitation. This means terrestrial ecosystem NPP is more closely related to near surface temperature than precipitation. Between 1976 and 2005, NPP shows an obvious increasing temporal trend, indicating the terrestrial ecosystem has had a positive response to climate change. MME NPP has increased 3.647PgC during historical period, which shows an increasing temporal trend of 3.9 gCm−2∙100 yr−2 in the past 150 years, also indicating that the terrestrial ecosystem has shown a positive response to climate change in past 150 years.

  1. Arrangements for Radiation Protection of Remediation Workers in Off-site Contaminated Areas at the Fukushima Daiichi NPP%福岛核事故场外污染整治中工作人员的辐射防护应对

    Institute of Scientific and Technical Information of China (English)

    王旭东

    2014-01-01

    An overview of Ordinance on Prevention of Ionizing Radiation Hazards at Works to Decontaminate Soil and Wastes Contaminated by Radioactive Materials Resulting from the Great East Japan Earthquake and Related Works presented ,along with the relevant guidelines .Their implementation in Fukushima Prefecture in the year of 2013 is also summarized .It seems that efforts of Japan to cope with radiation protection of remedi-ation workers in contaminated areas off-site are far from having been turned into good practices .%简要介绍了《东日本大地震致放射性污染土壤与废物清理及相关作业中电离辐射危害防止条例》和相关导则,以及2013年间福岛县的相应监管状况,粗略呈现出福岛核事故后日本在应对场外污染整治工作人员辐射防护之需求方面的努力,亦说明今后更多地需要在整治作业实践中予以落实。

  2. Development of Information Datasheets of Nuclear Power Plant (NPP) Equipment using cfiXLM schema

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jaiho; Song, Eunhye [KHNP-Central Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    In 2009, EPRI (Electrical Power Research Institute) published a new NPP information handover guide to provide NPP owners and operators with data handover templates in consistent format for effective delivery of information during all stages of the handover process. Another difficult concern for NPP data information management is to exchange the data information among many organizations such as NPP owners, operators, engineering companies, suppliers, and vendors. As a matter of fact, the improperly formatted handover of information sometimes occurs due to the discrepancy of data format (e. g., data description language type). This improper delivery can make negative effects on NPP integrity and safety. Thus, the lack of proper exchange for different data information systems of organizations should be resolved by using an international standard data format. The standard data format can reduce the cost and time for data exchange in each phase for design, procurement, delivery, installation, operation and maintenance of equipment. The AEX(automating equipment information exchange) pilot implementation project team under EPRI advanced nuclear technology (ANT) program has been conducted a research for the use of XML equipment schemas for electronic data exchange(EDE). They applied XML equipment schema for the design, selection, quotation, purchase and mock install of a safety injection centrifugal pump using EDE standard HI(hydraulic institute) 50.7. For data exchange, FIATECH, an industry consortium, has equally developed library of templates and reference data for ISO-15926, which is an international standard capable of reducing data-error and delivery time for exchanging data among different organizations. KHNP as an only owner/operator company has not experienced much difficulty in data interoperability with other organizations, but continued its unremitting exertions to develop a robust system capable of managing data information generated in all the stages of NPP

  3. Solidification of spent ion exchange resins into the SIAL matrix at the Dukovany NPP, Czech Republic

    Energy Technology Data Exchange (ETDEWEB)

    Tatransky, Peter; Prazska, Milena; Harvan, David [AMEC Nuclear Slovakia, Trnava, Slovak Republic, 917 01 (Slovakia)

    2013-07-01

    Based on the decision of the State Office for Nuclear Safety, the Dukovany NPP has been obliged to secure the efficient capacities for the disposal of spent ion exchange resins. Therefore, in September 2010, based on the contract with supplier company AMEC Nuclear Slovakia s.r.o. has begun with pumping and treatment of ion exchange resins from the storage tank 0TW30B02, situated in the auxiliary building. The SIAL{sup R} technology, developed in AMEC Nuclear Slovakia, has been used for the solidification purposes. This technology allows an on-site treatment of various special radioactive waste streams (resins, sludge, sludge/resins and borates) at the room temperature. The SIAL{sup R} matrix and technology were licensed by the Czech State Office for Nuclear Safety in 2007. On-site treatment and solidification of spent ion exchange resins at Dukovany NPP involves process of resin removal from tank using remotely operated manipulator, resin transportation, resin separation from free water, resin filling into 200 dm{sup 3} drums and solidification into SIAL{sup R} matrix in 200 dm{sup 3} drums using the FIZA S 200 facility. The final product is observed for compressive strength, leachability, radionuclide composition, dose rate, solids and total weight. After meeting the requirements for final disposal and consolidation, the drums are being transported for the final disposal to the Repository at Dukovany site. During the 3 month's trial operation in 2010, and the normal operation in 2011 and 2012, 189 tons of dewatered resins have been treated into 1960 drums, with total activity higher than 920 GBq. At the end of trial run (2010), 22 tons of dewatered resins were treated into 235 drums. During standard operation approximately 91 tons in 960 drums (2011) and 76 tons in 765 drums (2012) were treated. The weights of resins in the drum ware in the range from 89 - 106 kg and compressive strength limit (10 MPa) has already been achieved 24 hours after fixation. The

  4. Temporal variability of the NPP-GPP ratio at seasonal and interannual time scales in a temperate beech forest

    Directory of Open Access Journals (Sweden)

    M. Campioli

    2011-09-01

    Full Text Available The allocation of carbon (C taken up by the tree canopy for respiration and production of tree organs with different construction and maintenance costs, life span and decomposition rate, crucially affects the residence time of C in forests and their C cycling rate. The carbon-use efficiency, or ratio between net primary production (NPP and gross primary production (GPP, represents a convenient way to analyse the C allocation at the stand level. In this study, we extend the current knowledge on the NPP-GPP ratio in forests by assessing the temporal variability of the NPP-GPP ratio at interannual (for 8 years and seasonal (for 1 year scales for a young temperate beech stand, reporting dynamics for both leaves and woody organs, in particular stems. NPP was determined with biometric methods/litter traps, whereas the GPP was estimated via the eddy covariance micrometeorological technique.

    The interannual variability of the proportion of C allocated to leaf NPP, wood NPP and leaf plus wood NPP (on average 11% yr−1, 29% yr−1 and 39% yr−1, respectively was significant among years with up to 12% yr−1 variation in NPP-GPP ratio. Studies focusing on the comparison of NPP-GPP ratio among forests and models using fixed allocation schemes should take into account the possibility of such relevant interannual variability. Multiple linear regressions indicated that the NPP-GPP ratio of leaves and wood significantly correlated with environmental conditions. Previous year drought and air temperature explained about half of the NPP-GPP variability of leaves and wood, respectively, whereas the NPP-GPP ratio was not decreased by severe drought, with large NPP-GPP ratio on 2003 due mainly to low GPP. During the period between early May and mid June, the majority of GPP was allocated to leaf and stem NPP, whereas these sinks were of little importance later on. Improved estimation of seasonal GPP and of the

  5. Ageing management of french NPP civil work structures

    Science.gov (United States)

    Gallitre, E.; Dauffer, D.

    2011-04-01

    This paper presents EDF practice about concrete structure ageing management, from the mechanisms analysis to the formal procedure which allows the French company to increase 900 MWe NPP lifetime until 40 years; it will also introduce its action plan for 60 years lifetime extension. This practice is based on a methodology which identifies every ageing mechanism; both plants feedback and state of the art are screened and conclusions are drawn up into an "ageing analysis data sheet". That leads at first to a collection of 57 data sheets which give the mechanism identification, the components that are concerned and an analysis grid which is designed to assess the safety risk. This analysis screens the reference documents describing the mechanism, the design lifetime hypotheses, the associated regulation or codification, the feedback experiences, the accessibility, the maintenance actions, the repair possibility and so one. This analysis has to lead to a conclusion about the risk taking into account monitoring and maintenance. If the data sheet conclusion is not clear enough, then a more detailed report is launched. The technical document which is needed, is a formal detailed report which summarizes every theoretical knowledge and monitoring data: its objective is to propose a solution for ageing management: this solution can include more inspections or specific research development, or additional maintenance. After a first stage on the 900 MWe units, only two generic ageing management detailed reports have been needed for the civil engineering part: one about reactor building containment, and one about other structures which focuses on concrete inflating reactions. The second stage consists on deriving this generic analysis (ageing mechanism and detailed reports) to every plant where a complete ageing report is required (one report for all equipments and structures of the plant, but specific for each reactor). This ageing management is a continuous process because the

  6. Development of DUPIC fuel cycle technology - Assessment of Wolsong NPP fuel handling system for DUPIC fuel

    Energy Technology Data Exchange (ETDEWEB)

    Na, Bok Gyun; Nam, Gung Ihn [Korea Power Engineering Company, Taejon (Korea)

    2000-04-01

    The DUPIC fuel loading and discharge path of Wolsong NPP is studied assuming that DUPIC fuel is used at Wolsong NPP. Spent DUPIC fuel discharge path is irrelevant, since it uses the same spent fuel discharge path. Number of factors such as safety, economics of design change, radiation exposure to operators, easy of operation and maintenance, etc, are considered in the evaluation of path. A more detailed analysis of cost estimation of the selected path is also carried out. The study shows that DUPIC fuel loading path following through Spent Fuel Storage Bay and Spent Fuel Discharge Port in reverse direction will minimize the design change and additional equipment and radiation exposure to operators. The estimated total cost of using DUPIC fuel in Wolsong NPP based on price index of year 2000 is around 4.5 billion won. 4 refs., 30 figs., 13 tabs. (Author)

  7. Electrical Grid Conditioning For First NPP Integration, a Systems Engineering Approach Incorporating Quality Function Deployment

    Energy Technology Data Exchange (ETDEWEB)

    Pwani, Henry; James, J. [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2013-10-15

    Nuclear power plant has a high potential to cause serious harm to environment as evidenced by effects of Fukushima and Chernobyl accidents. A reliable electrical power is required for a NPP to facilitate cooling after a shutdown. Failure of electrical power supply during shutdown increases core damage probability. Research shows that a total of 39% of LOOP related events in US are electrical grid centered. In Korea, 38% and 29% of all events that led to NPP shutdown at Hanul units 3-6 and at Hanbit units 3-6 respectively were electrical related. Electric grids for both operating and new NPPs must therefore be examined and upgraded for reliability improvement in order to enhance NPP safety.

  8. Operating and mathematical representation of resonances between flow parameters oscillations and structure vibrations of NPP

    Energy Technology Data Exchange (ETDEWEB)

    Proskuryakov, K.N.; Yang Shan Afshar, E.; Polyakov, N.I. [Nuclear Power Plant Department of Moscow Power Engineering Institute Technical Univ., Moscow (Russian Federation)

    2007-07-01

    The experimental data that have been obtained from the measurements of noise signals in primary circuit of NPP with reactor of WWER-1000 are presented. The causes of resonant interaction between Eigen-Frequencies of Oscillations of the Coolant Pressure (EFOCP) and structure vibrations are discussed. An application-oriented approach to the problem of identification of abnormal phenomena of thermal-hydraulic parameters is proposed. Logarithmic Decrement {delta} is determined. The bigger damping ratio {zeta} provides bigger {delta} and correspondingly smaller values of Q-factor and amplitude X(t)max. All experimental units intended for NPP severe accident investigation must satisfy to the NPP Q-factor criterion of similarity. (authors)

  9. Comparing the impacts of 2003 and 2010 heatwaves in NPP over Europe

    Directory of Open Access Journals (Sweden)

    A. Bastos

    2013-10-01

    Full Text Available In the last decade, Europe was stricken by two outstanding heatwaves, the 2003 event in Western Europe and the recent 2010 episode over Russia. Both extreme events were characterised by record-breaking temperatures, and widespread socio-economic impacts, including significant increments on mortality rates, decreases in crop production and in hydroelectric production. This work aims to assess the influence of both mega-heatwaves on vegetation carbon uptake, using yearly Net Primary Production (NPP and monthly Net Photosynthesis (PsN data derived from satellite imagery obtained from MODIS for the period 2000–2011. In 2010, markedly low productivity was observed over a very large area in Russia, at monthly, seasonal and yearly scales, falling below 50% of average NPP. This decrease in NPP in 2010 was far more intense than the one affecting Western Europe in 2003, which corresponded to 20–30% of the average, and affected a~much larger extent. Total NPP anomalies reached −19 Tg C for the selected regions in France during 2003 and −94 Tg C for western Russia in 2010, which corresponds almost to the magnitude of total NPP anomaly during 2010 for the whole Europe. Overall, the widespread negative PsN anomalies in both regions match the patterns of very high temperature values preceded by a long period of below-average precipitation, leading to strong soil moisture deficits, stressing the role of soil-atmosphere coupling. In the case of 2003 heatwave, results indicate a strong influence of moisture deficits coupled with high temperatures in the response of vegetation, while for the 2010 event very high temperatures appear to be the main driver of very low NPP.

  10. Counter-regulatory phosphatases TNAP and NPP1 temporally regulate tooth root cementogenesis

    Institute of Scientific and Technical Information of China (English)

    Laura E Zweifler; Mudita K Patel; Francisco H Nociti Jr; Helen F Wimer; Jose L Milla n; Martha J Somerman; Brian L Foster

    2015-01-01

    Cementum is critical for anchoring the insertion of periodontal ligament fibers to the tooth root. Several aspects of cementogenesis remain unclear, including differences between acellular cementum and cellular cementum, and between cementum and bone. Biomineralization is regulated by the ratio of inorganic phosphate (Pi) to mineral inhibitor pyrophosphate (PPi), where local Pi and PPi concentrations are controlled by phosphatases including tissue-nonspecific alkaline phosphatase (TNAP) and ectonucleotide pyrophosphatase/phosphodiesterase 1 (NPP1). The focus of this study was to define the roles of these phosphatases in cementogenesis. TNAP was associated with earliest cementoblasts near forming acellular and cellular cementum. With loss of TNAP in the Alpl null mouse, acellular cementum was inhibited, while cellular cementum production increased, albeit as hypomineralized cementoid. In contrast, NPP1 was detected in cementoblasts after acellular cementum formation, and at low levels around cellular cementum. Loss of NPP1 in the Enpp1 null mouse increased acellular cementum, with little effect on cellular cementum. Developmental patterns were recapitulated in a mouse model for acellular cementum regeneration, with early TNAP expression and later NPP1 expression. In vitro, cementoblasts expressed Alpl gene/protein early, whereas Enpp1 gene/protein expression was significantly induced only under mineralization conditions. These patterns were confirmed in human teeth, including widespread TNAP, and NPP1 restricted to cementoblasts lining acellular cementum. These studies suggest that early TNAP expression creates a low PPi environment promoting acellular cementum initiation, while later NPP1 expression increases PPi, restricting acellular cementum apposition. Alterations in PPi have little effect on cellular cementum formation, though matrix mineralization is affected.

  11. Environmental qualification design for NPP refurbishment to comply with revised licensing requirements

    Energy Technology Data Exchange (ETDEWEB)

    MacBeth, M. J.; Hemmings, R. L. [Canatom-NPM, Ontario (Canada)

    2002-04-15

    Recent Canadian Nuclear Regulatory decisions have imposed Environmental Qualification (EQ) requirements for twenty-four Reactor Building (RB) airlocks at the four-unit Pickering Nuclear Generating Station-B (PNGS-B) facility. This paper describes the EQ modification design work completed by CANATOM-NPM for the problematic aspects for such projects. The airlocks allow RB access while providing a containment boundary and are designed to prevent a potential breach of containment for all analysed station conditions. Each PNGS-B unit has three large equipment airlocks and three smaller personnel airlocks. The airlocks must function under postulated worst-case design basis accident(DBA) conditions for assigned mission durations. The design must ensure that accident conditions cannot spuriously initiate an un-requested door opening. CANATOM-NPM reviewed site data to specify the necessary EQ modifications required to satisfy licensing requirements while providing a correct and complete as-found record of the existing airlock installation. The design team assessed the installed airlocks configuration against environmental qualification requirements to finalize the list of necessary modifications. A comprehensive, cross-discipline review of proposed design changes was completed to identify any further changes required to satisfy the final EQ licensing goal. The design team also conducted a design review of the EQ modification installation strategy to integrate the design deliverables with the installation team requirements while attempting to minimize necessary outage time for EQ modification installations. This project was completed on schedule and within the cost limitations required by the client with comprehensive, high quality final design packages. Overall improvements were realized for OPG system drawings and the electronic documentation of design data. The EQ modifications designed by CANATOM-NPM will ensure the continued operation of the PNGS-B NPP past December 31

  12. An information theory-based approach to modeling the information processing of NPP operators

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Hyun; Seong, Poong Hyun [Korea Advanced Institute, Taejon (Korea, Republic of)

    2002-08-01

    This paper proposes a quantitative approach to modeling the information processing of NPP operators. The aim of this work is to derive the amount of the information processed during a certain control task. The focus will be on i) developing a model for information processing of NPP operators and ii) quantifying the model. To resolve the problems of the previous approaches based on the information theory, i.e. the problems of single channel approaches, we primarily develop the information processing model having multiple stages, which contains information flows. Then the uncertainty of the information is quantified using the Conant's model, a kind of information theory.

  13. MODIS GPP/NPP for complex land use area: a case study of comparison between MODIS GPP/NPP and ground-based measurements over Korea

    Science.gov (United States)

    Shim, C.

    2013-12-01

    The Moderate Resolution Imaging Radiometer (MODIS) Gross Primary Productivity (GPP)/Net Primary Productivity (NPP) has been widely used for the study on global terrestrial ecosystem and carbon cycle. The current MODIS product with ~ 1 km spatial resolution, however, has limitation on the information on local scale environment (Pinus densiflora) agreed well with -0.2% of bias (1.6 gCm-2yr-1). The fairly comparable values of the MODIS here however, cannot assure the quality of the MOD17 over the complex vegetation area of Korea since the ground measurements except the eddy covariance tower flux measurements are highly inconsistent. Therefore, the comprehensive experiments to represents GPP/NPP over diverse vegetation types for a comparable scale of MODIS with a consistent measurement technique are necessary in order to evaluate the MODIS vegetation productivity data over Korea, which contains a large portion of highly heterogeneous vegetation area.

  14. Probabilistic Seismic Hazard Assessment for a NPP in the Upper Rhine Graben, France

    Science.gov (United States)

    Clément, Christophe; Chartier, Thomas; Jomard, Hervé; Baize, Stéphane; Scotti, Oona; Cushing, Edward

    2015-04-01

    The southern part of the Upper Rhine Graben (URG) straddling the border between eastern France and western Germany, presents a relatively important seismic activity for an intraplate area. A magnitude 5 or greater shakes the URG every 25 years and in 1356 a magnitude greater than 6.5 struck the city of Basel. Several potentially active faults have been identified in the area and documented in the French Active Fault Database (web site in construction). These faults are located along the Graben boundaries and also inside the Graben itself, beneath heavily populated areas and critical facilities (including the Fessenheim Nuclear Power Plant). These faults are prone to produce earthquakes with magnitude 6 and above. Published regional models and preliminary geomorphological investigations provided provisional assessment of slip rates for the individual faults (0.1-0.001 mm/a) resulting in recurrence time of 10 000 years or greater for magnitude 6+ earthquakes. Using a fault model, ground motion response spectra are calculated for annual frequencies of exceedance (AFE) ranging from 10-4 to 10-8 per year, typical for design basis and probabilistic safety analyses of NPPs. A logic tree is implemented to evaluate uncertainties in seismic hazard assessment. The choice of ground motion prediction equations (GMPEs) and range of slip rate uncertainty are the main sources of seismic hazard variability at the NPP site. In fact, the hazard for AFE lower than 10-4 is mostly controlled by the potentially active nearby Rhine River fault. Compared with areal source zone models, a fault model localizes the hazard around the active faults and changes the shape of the Uniform Hazard Spectrum at the site. Seismic hazard deaggregations are performed to identify the earthquake scenarios (including magnitude, distance and the number of standard deviations from the median ground motion as predicted by GMPEs) that contribute to the exceedance of spectral acceleration for the different AFE

  15. Vegetation NPP Distribution Based on MODIS Data and CASA Model——A Case Study of Northern Hebei Province

    Institute of Scientific and Technical Information of China (English)

    YUAN Jinguo; NIU Zheng; WANG Chenli

    2006-01-01

    Net Primary Productivity (NPP) is one of the important biophysical variables of vegetation activity, and it plays an important role in studying global carbon cycle, carbon source and sink of ecosystem, and spatial and temporal distribution of CO2. Remote sensing can provide broad view quickly, timely and multi-temporally, which makes it an attractive and powerful tool for studying ecosystem primary productivity, at scales ranging from local to global. This paper aims to use Moderate Resolution Imaging Spectroradiometer (MODIS) data to estimate and analyze spatial and temporal distribution of NPP of the northern Hebei Province in 2001 based on Carnegie-Ames-Stanford Approach (CASA) model.The spatial distribution of Absorbed Photosynthetically Active Radiation (APAR) of vegetation and light use efficiency in three geographical subregions, that is, Bashang Plateau Region, Basin Region in the northwestern Hebei Province and Yanshan Mountainous Region in the Northern Hebei Province were analyzed, and total NPP spatial distribution of the study area in 2001 was discussed. Based on 16-day MODIS Fraction of Photosynthetically Active Radiation absorbed by vegetation (FPAR) product, 16-day composite NPP dynamics were calculated using CASA model; the seasonal dyamics of vegetation NPP in three subregions were also analyzed. Result reveals that the total NPP of the study area in 2001 was 25.1877×106 gC/(m2·a), and NPP in 2001 ranged from 2 to 608 gC/(m2·a), with an average of 337.516 gC/(m2·a). NPP of the study area in 2001 accumulated mainly from May to September (DOY 129-272), high NPP values appeared from June to August (DOY 177-204), and the maximum NPP appeared from late July to mid-August (DOY 209-224).

  16. An Analysis of Cyber-Attack on NPP Considering Physical Impact

    Energy Technology Data Exchange (ETDEWEB)

    Lee, In Hyo; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of); Son, Han Seong [Joonbu University, Geumsan (Korea, Republic of)

    2016-05-15

    Some research teams performed related works on cyber-physical system which is a system that cyber-attack can lead to serious consequences including product loss, damage, injury and death when it is attacked. They investigated the physical impact on cyber-physical system due to the cyber-attack. But it is hard to find the research about NPP cyber security considering the physical impact or safety. In this paper, to investigate the relationship between physical impact and cyber-attack, level 1 PSA results are utilized in chapter 2 and cyber-attack analysis is performed in chapter 3. The cyber security issue on NPP is inevitable issue. Unlike general cyber security, cyber-physical system like NPP can induce serious consequences such as core damage by cyber-attack. So in this paper, to find how hacker can attack the NPP, (1) PSA results were utilized to find the relationship between physical system and cyber-attack and (2) vulnerabilities on digital control systems were investigated to find how hacker can implement the possible attack. It is expected that these steps are utilized when establishing penetration test plans or cyber security drill plans.

  17. Filtration Algorithms of Untrustworthy Analogous Information in APCS at TPP and NPP

    Directory of Open Access Journals (Sweden)

    V. Nazarov

    2012-01-01

    Full Text Available The paper considers filtration algorithms of untrustworthy analogous information in APCS at TTP and NPP that make it possible to identify credibility of information transmitted through communication channels in the form of signals and which are continuously changeable in the regime of real time.

  18. Assessing deposition levels of 55Fe, 60Co and 63Ni in the Ignalina NPP environment

    DEFF Research Database (Denmark)

    Gudelis, A.; Druteikienė, R.; Lukšienė, B.

    2010-01-01

    Two RBMK-1500 reactor units operated in Lithuania in the 1987–2004 period (one of them was stopped for decommissioning in 2004). This study presents a preliminary investigation of surface deposition density levels of 55Fe and 63Ni in moss samples collected in the close vicinity of the Ignalina NPP...

  19. Replacement of battery in Asco NPP Chargers; Sustitucion de cargadores de baterias en C. N. Asco

    Energy Technology Data Exchange (ETDEWEB)

    Montero Lansanc, J.

    2013-07-01

    The purpose of this paper is to present the project to replace battery chargers at NPP Asco. It describes the reasons for the replacement, the project approach, the development to date and current status of the project, the economics, and some lessons learned during the process.

  20. Post-Launch Calibration Support for VIIRS Onboard NASA NPP Spacecraft

    Science.gov (United States)

    Xiong, Xiaoxion; Chiang, Kwo-Fu; McIntire, Jeffrey; Schwaller, Matthew; Butler, James

    2011-01-01

    The NPP Instrument Calibration Support Element (NICSE) is one of the elements within the NASA NPP Science Data Segment (SDS). The primary responsibility of NICSE is to independently monitor and evaluate on-orbit radiometric and geometric performance of the Visible Infrared Imaging Radiometer Suite (VIIRS) instrument and to validate its Sensor Data Record (SDR) [1]. The NICSE interacts and works closely with other SDS Product Evaluation and Analysis Tools Elements (PEATE) and the NPP Science Team (ST) and supports their on-orbit data product calibration and validation efforts. The NICSE also works closely with the NPP Instrument Calibration Support Team (NICST) during sensor pre-launch testing in ambient and thermal vacuum environment [2]. This paper provides an overview of NICSE VIIRS sensor post-launch calibration support with a focus on the use of sensor on-board calibrators (OBC) for the radiometric calibration and characterization. It presents the current status of NICSE post-launch radiometric calibration tool development effort based on its design requirements

  1. Forward alliance. AREVA's initiative for NPP's LTO projects

    Energy Technology Data Exchange (ETDEWEB)

    Bergholz, Steffen; Heinz, Benedikt; Rudolph, Juergen [AREVA GmbH, Erlangen (Germany); Quist, Perry [EPZ - Elektriciteits-Productiemaatschappij Zuid-Nederland N.V., Borssele (Netherlands)

    2014-08-15

    Nowadays, the abbreviation LTO (Long Term Operation) is well known in the NPP's world. No other kind of projects can ensure the actual economic and environmental questions of the world of energy production with this high efficiency. Two-thirds of the actual international NPP fleet in operation has reached an age of more than 25 years. The former NPP's design life of normally 40 years has changed to 60 years for new plants. Furthermore, the existing fleet is nominally prepared for an operational period of more the 40 years. AREVA had launched the Forward Alliance initiative which offers different activities to ensure a support of customer's LTO projects. This article will give an overview on the Forward Alliance initiative followed by a technical example how the AREVA Fatigue Concept (AFC) can fulfill the fatigue monitoring topic within potential LTO projects. The successfully realized LTO project for NPP Borssele (Netherlands) shows as a customer example how the Forward Alliance blocks can work.

  2. Assessment of Hard-to-Detect Radionuclide Levels in Decommissioning Waste From the Bohunice NPP-A1, Slovakia, for Clearance and Disposal Purposes

    Energy Technology Data Exchange (ETDEWEB)

    Slavik, O.; Moravek, J.; Stubna, M.

    2002-02-26

    For assessments of hard-to-detect radionuclides (HD-RN) contents in various type of radwastes at the NPP-A1, available empirical data referenced to 137Cs (actinides, 90Sr, 99Tc, 63Ni, 14C) and the theoretical assessment for the remaining HD-RN using calculated RN inventory and a simple model with effective relative (137Cs) spent fuel release fractions was applied. The analytical data of extended radiochemical analysis for the existing available operational radwaste forms have been reviewed for this purpose. 137Cs, 90Sr and 241Am were set up as release markers for partial spent fuel release groups of HD-RNs within which the total fractions of HD-RN released to the operational radwastes were assumed to be constant. It was shown by the assessment carried out that 137Cs and HD-RNs 129I, 99Tc, and partly 79Se and 14C are the main contributors to the disposal dose limit for the radioactive concentrate at NPP A-1. In the case of the radioactive sludge from the operational radwaste system the role of predominant dose contributors belongs to actinides 239,240Pu and 241Am. In the case of clearance of radioactive material from the NPP-A1 site, only the reference radionuclide, 137Cs was predicted to be the most dominant dose contributor. In all of these cases the estimated contributions of other hard-to-detect radionuclides to respective disposal or release dose limit are lower by 2 and more orders of magnitude. As a lesson learned, the most attention is proposed to focus on the control and measurement of the critical HD-RNs indicated by the assessment. For the control of less important HD-RNs, the developed release coefficient method is sufficient to be applied.

  3. Sensitivity Analysis of Evacuation Speed in Hypothetical NPP Accident by Earthquake

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung-yeop; Lim, Ho-Gon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Effective emergency response in emergency situation of nuclear power plant (NPP) can make consequences be different therefore it is regarded important when establishing an emergency response plan and assessing the risk of hypothetical NPP accident. Situation of emergency response can be totally changed when NPP accident caused by earthquake or tsunami is considered due to the failure of roads and buildings by the disaster. In this study evacuation speed has been focused among above various factors and reasonable evacuation speed in earthquake scenario has been investigated. Finally, sensitivity analysis of evacuation speed in hypothetical NPP accident by earthquake has been performed in this study. Evacuation scenario can be entirely different in the situation of seismic hazard and the sensitivity analysis of evacuation speed in hypothetical NPP accident by earthquake has been performed in this study. Various references were investigated and earthquake evacuation model has been developed considering that evacuees may convert their evacuation method from using a vehicle to walking when they face the difficulty of using a vehicle due to intense traffic jam, failure of buildings and roads, and etc. The population dose within 5 km / 30 km have been found to be increased in earthquake situation due to decreased evacuation speed and become 1.5 - 2 times in the severest earthquake evacuation scenario set up in this study. It is not agreed that using same emergency response model which is used for normal evacuation situations when performing level 3 probabilistic safety assessment for earthquake and tsunami event. Investigation of data and sensitivity analysis for constructing differentiated emergency response model in the event of seismic hazard has been carried out in this study.

  4. Effect of dietary NPP level and phytase supplementation on the laying performance over one year period

    Directory of Open Access Journals (Sweden)

    Annamaria Tischler

    2015-06-01

    Full Text Available Our trial was aimed to study the effect of different dietary non-phytin phosphorus (NPP levels with and without phytase enzyme supplementation on laying performance and eggshell quality of Tetra SL-LL in the last 25 weeks of the long-term (17 months egg production. A total of 69 Tetra SL-LL layers were allocated into 3 dietary treatments. Two diets with different levels of NPP (2.45 or 2.15 g/kg, HP and LP, respectively were formulated, and 0 or 300 FTU/kg phytase enzyme was added to low NPP feed (LP and LP+E, respectively. Dietary Ca was uniformly adjusted (38.2 g/kg to feed in each treatment. In the course of the trial, intensity of egg production (%, egg weight (g/egg, number of the broken eggs and feed intake (g/d/bird were recorded. Every 2 weeks 20 eggs per treatment were broken to determine the shell strength and thickness. Our results show that low NPP diet had detrimental effect on the intensity of egg production (P<0.05 and phytase added to the LP diet resulted the lowest number of broken eggs (P<0.05. In conclusion, NPP content of the layer diet can be reduced from 2.45 to 2.15 g/kg in the last 25 weeks of the elongated laying term (12-17 month of laying, if supplemented with 300 FTU/kg phytase enzyme without compromising the egg production, and in the same time it can improve eggshell quality and reduce the number of broken eggs.

  5. Site Response Analysis Using DeepSoil: Case Study of Bangka Site, Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Iswanto, Eko Rudi; Yee, Eric [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2015-10-15

    Indonesia government declared through Act No. 17 year 2007 on the National Long-Term Development Plant Year 2005-2025 and Presidential Decree No. 5 year 2006 on the National Energy Policy (Indonesia 2007; Indonesia 2006), that nuclear energy is stated as a part of the national energy system. In order to undertake the above national policy, National Nuclear Energy Agency of Indonesia, as the promotor for the utilization of nuclear energy will conduct site study, which is a part of infrastructure preparation for NPP construction. Thorough preparation and steps are needed to operate an NPP and it takes between 10 to 15 years from the preliminary study (site selection, financial study, etc.) up to project implementation (manufacturing, construction, commissioning). During project implementation, it is necessary to prepare various documents relevant for permit application such as Safety Evaluation Report for site permit, Preliminary Safety Analysis Report and Environment Impact Assessment Report for construction permit. Considering the continuously increasing electricity energy demand, it is necessary to prepare for alternative NPP sites. The safety requirements of NPP's are stringent; amongst the various requirements is the ability to safely shut down in the wake of a possible earthquake. Ground response analysis of a potential site therefore needs to be carried out, parameter that affect the resistance of an NPP to earthquakes such as peak strain profiles is analysed. The objective of this paper is to analyse the ground response of the selected site for a NPP, using The Mw 7.9 in Sikuai Island, West Sumatra on September 12, 2007 as present input motion. This analysis will be carried out using a ground response analysis program, DeepSoil. In addition to this, an attempt was made to define the site specific input motion characteristics of the selected site for use in DeepSoil (DeepSoil 5.0). A site investigation at the WB site was performed primarily on the PS

  6. NPP financial and regulatory risks-Importance of a balanced and comprehensive nuclear law for a newcomer country considering nuclear power programme

    Science.gov (United States)

    Manan, J. A. N. Abd; Mostafa, N. A.; Salim, M. F.

    2015-04-01

    The nature of Nuclear Power Plant (NPP) projects are: long duration (10-15 years for new build), high capital investment, reasonable risks and highly regulated industries to meet national & international requirement on Safety, Security, Safeguards (3S) and Liabilities. It requires long term planning and commitment from siting to final disposal of waste/spent fuel. Potential financial and regulatory risks are common in massive NPP projects and will be magnified in the case of using unproven technology. If the risks are not properly managed, it can lead to high project and operation costs, and, fail to fulfil its objectives to provide compatible electricity prices and. energy security. To ensure successful, the government and investors need to ensure that the NPP project is bankable with low cost of project and funding, have fair treatment and proper risk mitigation, and able to complete on time with no cost overrun. One of the requirements as prerequisite for the development of NPP as stipulated by the International Atomic Energy Agency (IAEA) is the establishment of a Legal and Regulatory Framework. The main objective of nuclear law is to ensure that the activities and projects carried-out in the country are legal and compliant to national and international requirements. The law should also be able to provide fair treatment of risks on its activities that is acceptable to investors. The challenge for a newcomer country is to develop a balanced and comprehensive national nuclear law that meet these objectives while taking into consideration various stakeholders' interest without compromising on safety, security, safeguard, liability requirements and other international obligations. This paper highlights the nature of NPP projects, its potential and associated financial and regulatory risks, and its major concerns and challenges. It proposes possible risks treatment and mitigation through the formulation of a balanced and comprehensive legislation by clear

  7. NPP financial and regulatory risks-Importance of a balanced and comprehensive nuclear law for a newcomer country considering nuclear power programme

    Energy Technology Data Exchange (ETDEWEB)

    Manan, J. A. N. Abd, E-mail: jamalan@tnb.com.my; Mostafa, N. A.; Salim, M. F. [Nuclear Energy Department, Planning Division, Tenaga Nasional Berhad Level 32, Dua Sentral, No. 8 Jalan Tun Sambanthan, 50470 Brickfields, Kuala Lumpur (Malaysia)

    2015-04-29

    The nature of Nuclear Power Plant (NPP) projects are: long duration (10-15 years for new build), high capital investment, reasonable risks and highly regulated industries to meet national and international requirement on Safety, Security, Safeguards (3S) and Liabilities. It requires long term planning and commitment from siting to final disposal of waste/spent fuel. Potential financial and regulatory risks are common in massive NPP projects and will be magnified in the case of using unproven technology. If the risks are not properly managed, it can lead to high project and operation costs, and, fail to fulfil its objectives to provide compatible electricity prices and. energy security. To ensure successful, the government and investors need to ensure that the NPP project is bankable with low cost of project and funding, have fair treatment and proper risk mitigation, and able to complete on time with no cost overrun. One of the requirements as prerequisite for the development of NPP as stipulated by the International Atomic Energy Agency (IAEA) is the establishment of a Legal and Regulatory Framework. The main objective of nuclear law is to ensure that the activities and projects carried-out in the country are legal and compliant to national and international requirements. The law should also be able to provide fair treatment of risks on its activities that is acceptable to investors. The challenge for a newcomer country is to develop a balanced and comprehensive national nuclear law that meet these objectives while taking into consideration various stakeholders’ interest without compromising on safety, security, safeguard, liability requirements and other international obligations. This paper highlights the nature of NPP projects, its potential and associated financial and regulatory risks, and its major concerns and challenges. It proposes possible risks treatment and mitigation through the formulation of a balanced and comprehensive legislation by clear

  8. Measurement of the stressed state of welded joints in the NPP process components and circulation pipelines based on acoustoelasticity theory

    Directory of Open Access Journals (Sweden)

    A.I. Trofimov

    2016-09-01

    Full Text Available The paper presents the results of a theoretical justification and an experimental research for a method to measure the stressed state of welded joints in the nuclear power plant (NPP process components and circulation pipelines based on acoustoelasticity theory, as well as for ways to implement them technically. Devices for measuring the stressed state of welded joints in the NPP process components and circulation pipelines based on acoustoelasticity theory allow online measurement of residual stresses along the weld height and detection of crack formation points. The use of such devices will enable early crack detection in welded joints for an increased safety of the NPP operation.

  9. Integrated safety Asco NPP; Seguridad integrada C. N. Asco

    Energy Technology Data Exchange (ETDEWEB)

    Bolanos Jardi, J.

    2015-07-01

    One of the pillars on which is based the operation of Asco-Vandellos II Nuclear Association (ANAV) and its nuclear sites, is security, as is collected inside the mission of ANAV. Operate nuclear power plants safely and reliable, and environmentally friendly and guaranteeing long-term production. (Author)

  10. Experience on Primary System Decommissioning in Jose Cabrera NPP

    Energy Technology Data Exchange (ETDEWEB)

    Paloma Molleda; Leandro Sanchez; David Rodriguez [ENSA, Cantabria (Spain)

    2015-10-15

    Primary System Decommissioning belongs to DCP(Decommissioning and Closure Plan) works and its scope includes: Steam Generator, Pressurizer, Refrigerant Circuit Pump and Primary Circuit Piping. All these dismantling activities were carried out on site, including preliminary steps before their removal (SAS installations, pre decontaminations, cutting and segmentations, segregations, etc.) and delivery to media/low activity nuclear waste disposal site. There are many cutting techniques available in market (most of them proved with positive results) as well as there are many different approaches about how to manage radioactive wastes in decommissioning projects (containers or great components disposal, containers burial, re fusion, etc.). Both issues are linked and, before starting a new project, it might be positive and quite useful to compare and study previous dismantling experiences, especially the lesson learned chapter. Primary System cut with diamond saw has been a challenge target, not only due to the methodology innovation (since until nowadays, the common use of this technology was performed in cutting concrete walls) because it has a huge range of positive aspects that, in our opinion, are attractive (apart from its mentioned versatility, in terms of cutting on site and every type of material)

  11. NPP-VIIRS DNB-based reallocating subpopulations to mercury in Urumqi city cluster, central Asia

    Science.gov (United States)

    Zhou, X.; Feng, X. B.; Dai, W.; Li, P.; Ju, C. Y.; Bao, Z. D.; Han, Y. L.

    2017-02-01

    Accurate and update assignment of population-related environmental matters onto fine grid cells in oasis cities of arid areas remains challenging. We present the approach based on Suomi National Polar-orbiting Partnership (S-NPP) -Visible Infrared Imaging Radiometer Suite (VIIRS) Day/Night Band (DNB) to reallocate population onto a regular finer surface. The number of potential population to the mercury were reallocated onto 0.1x0.1 km reference grid in Urumqi city cluster of China’s Xinjiang, central Asia. The result of Monte Carlo modelling indicated that the range of 0.5 to 2.4 million people was reliable. The study highlights that the NPP-VIIRS DNB-based multi-layered, dasymetric, spatial method enhances our abilities to remotely estimate the distribution and size of target population at the street-level scale and has the potential to transform control strategies for epidemiology, public policy and other socioeconomic fields.

  12. Introduction of characteristics and construction methods for Lungmen NPP

    Energy Technology Data Exchange (ETDEWEB)

    Hur, Kyung Phil; Manager, General [Nuclear Project Business Team, Seoul (Korea, Republic of)

    2007-04-15

    Daewoo Engineering and Construction Co., Ltd. has taken part in the construction of ABWR (Advance Boiling Water Reactor of capacity of 1,350MW) at Lungmen site in Taiwan since 1999 as a member of Joint Company for the Nuclear Island Civil Work and Nuclear Island Equipment and Piping Work. This paper discusses the introduction of NSSS of ABWR and the major construction methods applied to Lungmen Nuclear Power Plants. Even though there is no BWR or ABWR type of Nuclear Power Plants built in Korea, the information and data related to the newly advanced construction technologies which has been already applied successfully is very important for the future overseas expansion.

  13. Development of requirements tracking and verification technology for the NPP software

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Chul Hwan; Kim, Jang Yeol; Lee, Jang Soo; Song, Soon Ja; Lee, Dong Young; Kwon, Kee Choon

    1998-12-30

    Searched and analyzed the technology of requirements engineering in the areas of aerospace and defense industry, medical industry and nuclear industry. Summarized the status of tools for the software design and requirements management. Analyzed the software design methodology for the safety software of NPP. Development of the design requirements for the requirements tracking and verification system. Development of the background technology to design the prototype tool for the requirements tracking and verification.

  14. Floor response spectra for seismic qualification of Kozloduy VVER 440-230 NPP

    Energy Technology Data Exchange (ETDEWEB)

    Kostov, M.K. [Bulgarian Academy of Sciences, Sofia (BG). Central Lab. for Seismic Mechanics and Earthquake Engineering; Ma, D.C. [Argonne National Lab., IL (United States); Prato, C.A. [Univ. of Cordoba (AR); Stevenson, J.D. [Stevenson and Associates, Cleveland, OH (US)

    1993-08-01

    In this paper the floor response spectra generation methodology for Kozloduy NPP, Unit 1-2 of VVER 440-230 is presented. The 2D coupled soil-structure interaction models are used combined with a simplified correction of the final results for accounting of torsional effects. Both time history and direct approach for in-structure spectra generation are used and discussion of results is made.

  15. RADIATION HYGIENIC CONSEQUENCES OF THE ACCIDENT AT THE CHERNOBYL NPP AND THE TASKS OF THEIR MINIMIZATION

    Directory of Open Access Journals (Sweden)

    G. G. Onischenko

    2009-01-01

    Full Text Available The paper presents data on the role and results of activities of Rospotrebnadzor bodies and institutions in the field of ensuring population radiation protection during various periods since accident at the Chernobyl NPP. Radiation hygienic characterization of territories affected by radioactive contamination from the accident, population exposure dose range, issues of ensuring radiological well-being of population and ways of their solution are being presented in the paper.

  16. Optimization of the energy complex “NPP-accumulator” in case of force majeure

    Science.gov (United States)

    Zaluzhnaya, G.; Zagrebaev, A.

    2017-01-01

    We consider a problem of optimization of NPP with accumulator operation mode in case of force majeure. A mathematical formulation and solving of problem of energy output’s time behavior is provided. A mathematical formulation and solving of problem of energy’s optimum allocation to consumers with different priorities. Mathematically, the problem reduces to linear programming problem. We received that optimal time behavior is uniform energy output, and one should start with consumer with highest priority.

  17. Deterministic and Probabilistic Analysis of NPP Communication Bridge Resistance Due to Extreme Loads

    Directory of Open Access Journals (Sweden)

    Králik Juraj

    2014-12-01

    Full Text Available This paper presents the experiences from the deterministic and probability analysis of the reliability of communication bridge structure resistance due to extreme loads - wind and earthquake. On the example of the steel bridge between two NPP buildings is considered the efficiency of the bracing systems. The advantages and disadvantages of the deterministic and probabilistic analysis of the structure resistance are discussed. The advantages of the utilization the LHS method to analyze the safety and reliability of the structures is presented

  18. Computer modeling and simulators as part of university training for NPP operating personnel

    Science.gov (United States)

    Volman, M.

    2017-01-01

    This paper considers aspects of a program for training future nuclear power plant personnel developed by the NPP Department of Ivanovo State Power Engineering University. Computer modeling is used for numerical experiments on the kinetics of nuclear reactors in Mathcad. Simulation modeling is carried out on the computer and full-scale simulator of water-cooled power reactor for the simulation of neutron-physical reactor measurements and the start-up - shutdown process.

  19. Update of the tectonic model for the Pannonian basin: a contribution to the seismic hazard reassessment of the Paks NPP (Hungary)

    Science.gov (United States)

    Horváth, Ferenc; Tóth, Tamás; Wórum, Géza; Koroknai, Balázs; Kádi, Zoltán; Kovács, Gábor; Balázs, Attila; Visnovitz, Ferenc

    2015-04-01

    The planned construction of two new units at the site of the Paks NPP requires a comprehensive site investigation including complete reassessment of the seismic hazard according to the Hungarian as well as international standards. Following the regulations of the Specific Safety Guide no. 9 (IAEA 2010), the approved Hungarian Geological Investigation Program (HGIP) includes integrated geological-geophysical studies at different scales. The regional study aims at to elaborate a new synthesis of all published data for the whole Pannonian basin. This task is nearly completed and the main outcomes have already been published (Horváth et al. 2015). The near regional study is in progress and addresses the construction of a new tectonic model for the circular area with 50 km radius around the NPP using a wealth of unpublished oil company seismic and borehole data. The site vicinity study has also been started with a core activity of 300 km² 3D seismic data acquisition, processing and interpretation assisted by a series of additional geophysical surveys, new drillings and geological mapping. This lecture will present a few important results of the near regional study, which sheds new light on the intricate tectonic evolution of the Mid-Hungarian Fault Zone (MHFZ), which is a strongly deformed belt between the Alcapa and Tisza-Dacia megatectonic units. The nuclear power plant is located at the margin of the Tisza unit near to the southern edge of the MHFZ. Reassessment of seismic hazard at the site of the NPP requires better understanding of the Miocene to Recent tectonic evolution of this region in the central part of the Pannonian basin. Early to Middle Miocene was a period of rifting with formation of 1 to 3 km deep half-grabens filled with terrestrial to marine deposits and large amount of rift-related volcanic material. Graben fill became strongly deformed as a consequence of juxtaposition of the two megatectonic units leading to strong compression and development of

  20. Radiation conditions in the Oryol region territory impacted by radioactive contamination caused by the Chernobyl NPP accident

    Directory of Open Access Journals (Sweden)

    G. L. Zakharchenko

    2016-01-01

    Full Text Available Research objective is retrospective analysis of radiation conditions in the Oryol region during 1986- 2015 and assessment of efficacy of the carried out sanitary and preventive activities for population protection against radiation contamination caused by the Chernobyl NPP accident.Article materials were own memoirs of events participants, analysis of federal state statistic surveillance forms 3-DOZ across the Oryol region, f-35 “Data on patients with malignant neoplasms, f-12 “Report on MPI activities”. Risk assessment of oncological diseases occurrence is carried out on the basis of AAED for 1986- 2014 using the method of population exposure risk assessment due to long uniform man-made irradiation in small doses. Results of medical and sociological research of genetic, environmental, professional and lifestyle factors were obtained using the method of cancer patients’ anonymous survey. Data on "risk" factors were obtained from 467 patients hospitalized at the Budgetary Health Care Institution of the Oryol region “Oryol oncology clinic”; a specially developed questionnaire with 60 questions was filled out.The article employs the method of retrospective analysis of laboratory and tool research and calculation of dose loads on the Oryol region population, executed throughout the whole period after the accident.This article provides results of the carried out laboratory research of foodstuff, environment objects describing the radiation conditions in the Oryol region since the first days after the Chernobyl NPP accident in 1986 till 2015.We presented a number of activities aimed at liquidation of man-caused radiation accident consequences which were developed and executed by the experts of the Oryol region sanitary and epidemiology service in 1986-2015. On the basis of the above-stated one may draw the conclusions listed below. Due to interdepartmental interaction and active work of executive authorities in the Oryol region, the

  1. The Fukushima Dai-ichi NPP accident crisis and its influence on energy policy in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Uchida, Shunsuke; Naitoh, Masanori; Okada, Hidetoshi; Suzuki, Hiroaki [Institute of Applied Energy, Tokyo (Japan)

    2011-10-15

    Fossil fuel power plants (FPPs) and nuclear power plants (NPPs) along the northern Pacific coast of Japan experienced a mega earthquake and resulting tsunamis on March 11, 2011, which resulted in serious damage. More than half of the FPPs have returned to supplying electricity, while all NPPs are still shut down. In particular, Fukushima Dai-ichi Nuclear Power Plant (NPP) of the Tokyo Electric Power Co. experienced a nuclear accident crisis unprecedented in both scale and timeframe. This paper gives a brief overview of the events and their propagation based on the International Atomic Energy Agency (IAEA) report and the authors' studies on accident analysis, and offers considerations on root causes of the propagation, e.g., problems in hardware, software and accident management, by comparing the responses of Fukushima Dai-ichi NPP with those of other reactors at the Fukushima Dai-ni, Tokai, Onagawa and Higashidori NPPs, where cold shutdowns were successfully maintained even though they had also been affected by the earthquake and tsunamis. Future technical subjects for safe NPP operation and the influence of the events on Japanese energy policy are presented. (orig.)

  2. Evaluation of radiation safety for storage o high integrity container in Yonggwang NPP

    Energy Technology Data Exchange (ETDEWEB)

    Kwak, Sang Soo; Park, Seung Chil; Ha, Jong Hyun; Kim, Byung Tae [Nuclear Environment Technology Institute, KEPCO, Taejon (Korea, Republic of)

    1999-07-01

    In order to reduce the generation of radioactive waste in Yonggwang NPP, the spent resin dry system(SRDS) will be used for treatment of spent resin. According to operation of SRD, a different container will be required for containment of spent resin instead of DOT-17H drum. Therefore, the high integrity container (HIC) which is manufactured for disposal will be used for containment of spent resin generated from SRDS. Because the HIC contained with spent resin as high radioactivity and high radiation dose rate, a special attention in handling of HIC and storage of HIC in radioactive waste storage building should be paid. Accordingly, it is necessary to prepare the program for safe storage of HIC. Several options on storage of HIC into the radioactive waste storage building in Yonggwang NPP were established. Depending on the field conditions, it can be of help to the choice of pertinent method for safe and effective storage of HIC. In this report, the radiation safety of each option on the storage of HIC was evaluated and it shows that any option can be adapted as an effective storage method for Younggwang NPP if some problems appeared through the radiation safety evaluation are resolved. (author)

  3. Numerical Methods for an Analysis of Hydrogen Behaviors Coupled with Thermal Hydraulics in a NPP Containment

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jongtae; Park, Rae-Joon; Hong, Seong-Wan; Kim, Gun-Hong [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    In a containment safety analysis, multi-dimensional characteristics in thermal hydraulics are very important because the flow paths are not confined in a large free volume of the containment. The analysis is difficult because of a difference in length scales between a characteristic length of the flow and representative length of the containment. In order to simulate hydrogen and steam behaviors in a containment during postulated severe accidents, the GASFLOW code as a multi-dimensional analysis tool for NPP containment has been used for years because of its computational efficiency. Though GASFLOW is well developed for a real NPP containment analysis, there exist shortcomings in nodalization, two-phase and turbulence models. It is based on a Cartesian or cylindrical coordinate mesh, so it is impractical to refine a mesh locally in a region with a physical or geometrical complication. In this paper, the importance of the hydrogen safety in an NPP containment and requirements of the analysis tool was described. And physical models necessary for the hydrogen safety analysis code were listed. As a member of international collaborative project HYMERES for containment thermal hydraulics, KAERI is actively participating in an analytic working group. As an analysis tool for blind benchmarkes, the analysis code described in this paper was used. From the blind benchmark analyses, it was found that the code is very promising for hydrogen safety analysis. Currently, it is proposed to develop the code collaboratively in a hydrogen safety community based on an open-source strategy.

  4. Development of seismic safety reevaluation procedure considering the ageing of NPP facilities

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Myoung Kue [Jeonju Univ., Cheonju (Korea, Republic of); Kim, J. M. [Cheonnam National Univ., Gwangju (Korea, Republic of); Kim, Y. S.; Cheong, S. H.; Kim, I. S.; Lee, M. G.; Kim, D. O. [Andong National Univ., Andong (Korea, Republic of); Lee, G. H. [Mokpo National Maritime Univ., Mokpo (Korea, Republic of)

    2003-03-15

    There are three of Nuclear Power Plants subject to the USI A-46 in Korea, including Kori No 1 and No 2 and Wolsung No 1. For the sake of resolution of the issue the possibility of adopting the GIP developed by the SQUG in USA is very high. In relation to the issue, this study addresses some technical improvements of the GIP including sloshing analysis based on multiple modes, seismic retrofit of cabinet for reduction of ICRS and modification of IRS depending on damping ratio. Dominant degradation factor and its affects NPP concrete elements are reviewed : chloride induced corrosion, carbonation of concrete elements, freezing and thawing of concrete elements, chemical and biological process, crack affect on concrete degradation. Various technical reports and papers about age-related degradation are reviewed for identification of degradation properties of NPP structures and components and degradation trend in NPP structures and components. This report summarizes numerical model for concrete degradation and development procedure of numerical models for concrete degradation. This report proposes the research necessity for performance evaluation of degraded concrete structure and selection of element for further study.

  5. Conformity Between LR0 Mock-Ups and Vvers Npp Rpv Neutron Flux Attenuation

    Science.gov (United States)

    Belousov, Sergey; Ilieva, Krassimira; Kirilova, Desislava

    2009-08-01

    The conformity of the mock-up results and those for reactor pressure vessel (RPV) of nuclear power plants (NPP) has been evaluated in order to qualify if the mock-ups data could be used for benchmark's purpose only, or/and for simulating of the NPP irradiation conditions. Neutron transport through the vessel has been calculated by the three-dimensional discrete ordinate code TORT with problem oriented multigroup energy neutron cross-section library BGL. Neutron flux/fluence and spectrum shape represented by normalized group neutron fluxes in the multigroup energy structure, for neutrons with energy above 0.5 MeV, have been used for conformity analysis. It has been demonstrated that the relative difference of the attenuation factor as well as the group neutron fluxes did not exceed 10% at all considered positions for VVER-440. For VVER-1000, it has been obtained the same consistency, except for the location behind the RPV. The neutron flux attenuation behind the RPV is 18% higher than the mock-up attenuation. It has been shown that this difference arises from the dissimilarity of the biological shielding. The obtained results have demonstrated that the VVERs' mock-ups are appropriate for simulating the NPP irradiation conditions. The mock-up results for VVER-1000 have to be applied more carefully i.e. taking into account the existing peculiarity of the biological shielding and RPV attenuation azimuthal dependence.

  6. 浅议福岛核电事故对我国核电发展的影响及借鉴%Lessons from Fukushima Dai-ichi NPP Accident and Effect on NPP Development in China

    Institute of Scientific and Technical Information of China (English)

    潘金钊

    2012-01-01

    Although the Fukushima NPP accident caused no serious environmental problem in China, but it does have great effect on the future NPP development in China. The NPP development plan in China is so uniquely huge in the world energy field that great challenge has already arisen to the Chinese NPP constructors and operators. This paper analyzes the sequence of the Fukushima NPP, which can be referred to in the improvement of the NPP development plan and the NPP accident emergency plan.%日本福岛核电事故虽然未对我国的环境造成严重影响,但是该事故的发生对我国后续核电的发展必然产生重大影响.我国庞大、密集的核电发展规划在世界能源发展领域是绝无仅有的,无论是在技术路线、标准制订还是在建造、运行的组织管理上,我国核电建设者和管理者都将面临巨大考验.通过分析和借鉴本次日本福岛核电事故的发生、处理过程,将对我国核电发展在多方面提供重要参考,从而促进我国核电规划及核电事故应急体系的持续完善.

  7. Assessment Impacts of Weather and Land Use/Land Cover (LULC Change on Urban Vegetation Net Primary Productivity (NPP: A Case Study in Guangzhou, China

    Directory of Open Access Journals (Sweden)

    Xiantie Zeng

    2013-08-01

    Full Text Available Net primary productivity (NPP can indicate vegetation ecosystem services ability and reflect variation response to climate change and human activities. This study applied MODIS-1 km NPP products to investigate the NPP variation from 2001 to 2006, a fast urban expansion and adjustment period in Guangzhou, China, and quantify the impacts of weather and land use/land cover (LULC changes, respectively. The results showed that the NPP mean value increased at a rate of 11.6 g∙C∙m−2∙yr−1 during the initial three years and decreased at an accelerated rate of 31.0 g∙C∙m−2∙yr−1 during the final three years, resulting in a total NPP loss of approximately 167 × 106 g∙C. The spatiotemporal of NPP varied obviously in the central area, suburb and exurb of Guangzhou driven by three patterns of weather and LULC changes. By the interactive effects and the weather variation dominated effects, NPP of most areas changed slightly with dynamic index less than 5% of NPP mean value in the central area and the suburb. The LULC change dominated effects caused obvious NPP reduction, by more than 15% of the NPP mean value, which occurred in some areas of the suburb and extended to the exurb with the outward urban sprawl. Importantly, conversion from wood grassland, shrublands and even forests to croplands occupied by urban landscapes proved to be a main process in the conversion from high-NPP coverage to low-NPP coverage, thereby leading to the rapid degradation of urban carbon stock capacity in urban fringe areas. It is helpful for government to monitor urban ecological health and safety and make relevant policies.

  8. Station Blackout Initiated Event Chronology in LWR/HWR NPP

    Energy Technology Data Exchange (ETDEWEB)

    Park, Soo Yong; Ahn, Kwang Il [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2011-10-15

    Since the crisis at Fukushima nuclear power plants, a severe accident progression has been recognized as a very important area for an accident management and emergency planning. The purpose of this study is to investigate the comparative characteristics of a severe accident progression among the typical pressurized water reactor (PWR), boiling water reactor (BWR) and pressurized heavy water reactor (PHWR). The OPR 1000-like (ABB-CE type PWR), Peach Bottom-like (BWR/4 RCS with a MARK I Containment), and Wolsong1-like (CANDU6 type) plants are selected as reference plants of typical 1000 MWe PWR, 1140MWe BWR, and 600 MWe PHWR, respectively. The design parameters of these plants are quite different. Some of the major different design features of CANDU6 plant from other light water reactors, in terms of a severe accident, are that the plant adopts a duel primary heat transport system and has an additional amount of cooling water in the calandria vessel (calandria tank, CT) and calandria vault (CV). Another feature is that the CT is always submerged in water because the CV is flooded during normal operation. The containment (reactor building, R/B) failure pressure of the CANDU6 plant is considerably lower than that of the typical PWR or BWR4/MARK-I. The containment vessel free volume of MARK-I is much smaller than that of the PWR or CANDU6 plant. Since there is no steam generator (SG) or passive cooling system, the amount of cooling water inventory in BWR4 is relatively less than other plants. Meanwhile the minimum available time of battery power against station blackout (SBO) accident is different among plant types: six hours for BWR4 and four hours for 1000MWe PWR. Therefore, plant responses against the severe core damage scenarios like Fukushima accident are expected to be much different. By identifying plant response signatures, the appropriate correction actions can be developed as part of severe accident management. A SBO scenario, where all off-site power is lost

  9. Patterns of NPP, GPP, respiration, and NEP during boreal forest succession

    Science.gov (United States)

    Goulden, M.L.; Mcmillan, A.M.S.; Winston, G.C.; Rocha, A.V.; Manies, K.L.; Harden, J.W.; Bond-Lamberty, B. P.

    2011-01-01

    We combined year-round eddy covariance with biometry and biomass harvests along a chronosequence of boreal forest stands that were 1, 6, 15, 23, 40, 74, and 154 years old to understand how ecosystem production and carbon stocks change during recovery from stand-replacing crown fire. Live biomass (Clive) was low in the 1 and 6 year old stands, and increased following a logistic pattern to high levels in the 74 and 154year old stands. Carbon stocks in the forest floor (Cforest floor) and coarse woody debris (CCWD) were comparatively high in the 1year old stand, reduced in the 6 through 40year old stands, and highest in the 74 and 154year old stands. Total net primary production (TNPP) was reduced in the 1 and 6year old stands, highest in the 23 through 74year old stands and somewhat reduced in the 154year old stand. The NPP decline at the 154year old stand was related to increased autotrophic respiration rather than decreased gross primary production (GPP). Net ecosystem production (NEP), calculated by integrated eddy covariance, indicated the 1 and 6 year old stands were losing carbon, the 15year old stand was gaining a small amount of carbon, the 23 and 74year old stands were gaining considerable carbon, and the 40 and 154year old stands were gaining modest amounts of carbon. The recovery from fire was rapid; a linear fit through the NEP observations at the 6 and 15year old stands indicated the transition from carbon source to sink occurred within 11-12 years. The NEP decline at the 154year old stand appears related to increased losses from Clive by tree mortality and possibly from Cforest floor by decomposition. Our findings support the idea that NPP, carbon production efficiency (NPP/GPP), NEP, and carbon storage efficiency (NEP/TNPP) all decrease in old boreal stands. ?? 2010 Blackwell Publishing Ltd.

  10. Lunar BRDF Correction of Suomi-NPP VIIRS Day/Night Band Time Series Product

    Science.gov (United States)

    Wang, Z.; Roman, M. O.; Kalb, V.; Stokes, E.; Miller, S. D.

    2015-12-01

    Since the first-light images from the Suomi-NPP VIIRS low-light visible Day/Night Band (DNB) sensor were received in November 2011, the NASA Suomi-NPP Land Science Investigator Processing System (SIPS) has focused on evaluating this new capability for quantitative science applications, as well as developing and testing refined algorithms to meet operational and Land science research needs. While many promising DNB applications have been developed since the Suomi-NPP launch, most studies to-date have been limited by the traditional qualitative image display and spatial-temporal aggregated statistical analysis methods inherent in current heritage algorithms. This has resulted in strong interest for a new generation of science-quality products that can be used to monitor both the magnitude and signature of nighttime phenomena and anthropogenic sources of light emissions. In one particular case study, Román and Stokes (2015) demonstrated that tracking daily dynamic DNB radiances can provide valuable information about the character of the human activities and behaviors that influence energy, consumption, and vulnerability. Here we develop and evaluate a new suite of DNB science-quality algorithms that can exclude a primary source of background noise: i.e., the Lunar BRDF (Bidirectional Reflectance Distribution Function) effect. Every day, the operational NASA Land SIPS DNB algorithm makes use of 16 days worth of DNB-derived surface reflectances (SR) (based on the heritage MODIS SR algorithm) and a semiempirical kernel-driven bidirectional reflectance model to determine a global set of parameters describing the BRDF of the land surface. The nighttime period of interest is heavily weighted as a function of observation coverage. These gridded parameters, combined with Miller and Turner's [2009] top-of-atmosphere spectral irradiance model, are then used to determine the DNB's lunar radiance contribution at any point in time and under specific illumination conditions.

  11. OVERVIEW ON BNL ASSESSMENT OF SEISMIC ANALYSIS METHODS FOR DEEPLY EMBEDDED NPP STRUCTURES.

    Energy Technology Data Exchange (ETDEWEB)

    XU,J.; COSTANTINO, C.; HOFMAYER, C.; GRAVES, H.

    2007-04-01

    A study was performed by Brookhaven National Laboratory (BNL) under the sponsorship of the U. S. Nuclear Regulatory Commission (USNRC), to determine the applicability of established soil-structure interaction analysis methods and computer programs to deeply embedded and/or buried (DEB) nuclear power plant (NPP) structures. This paper provides an overview of the BNL study including a description and discussions of analyses performed to assess relative performance of various SSI analysis methods typically applied to NPP structures, as well as the importance of interface modeling for DEB structures. There are four main elements contained in the BNL study: (1) Review and evaluation of existing seismic design practice, (2) Assessment of simplified vs. detailed methods for SSI in-structure response spectrum analysis of DEB structures, (3) Assessment of methods for computing seismic induced earth pressures on DEB structures, and (4) Development of the criteria for benchmark problems which could be used for validating computer programs for computing seismic responses of DEB NPP structures. The BNL study concluded that the equivalent linear SSI methods, including both simplified and detailed approaches, can be extended to DEB structures and produce acceptable SSI response calculations, provided that the SSI response induced by the ground motion is very much within the linear regime or the non-linear effect is not anticipated to control the SSI response parameters. The BNL study also revealed that the response calculation is sensitive to the modeling assumptions made for the soil/structure interface and application of a particular material model for the soil.

  12. Impact of thicker cladding on the nuclear parameters of the NPP Krsko fuel

    Energy Technology Data Exchange (ETDEWEB)

    Kromar, Marjan, E-mail: marjan.kromar@ijs.s [Jozef Stefan Institute, Reactor Physics Department, Jamova 39, 1001 Ljubljana (Slovenia); Kurincic, Bojan [Nuclear Power Plant Krsko, Engineering Division, Nuclear Fuel and Reactor Core, Vrbina 12, 8270 Krsko (Slovenia)

    2011-04-15

    To make fuel rods more resistant to grid-to-rod fretting or other cladding penetration failures, the cladding thickness could be increased or strengthened. Implementation of thicker fuel rod cladding was evaluated for the NPP Krsko that uses 16 x 16 fuel design. Cladding thickness of the Westinghouse standard fuel design (STD) and optimized fuel design (OFA) is increased. The reactivity effect during the fuel burnup is determined. To obtain a complete realistic view of the fuel behaviour a typical, near equilibrium, 18-month fuel cycle is investigated. The most important nuclear core parameters such as critical boron concentrations, isothermal temperature coefficient and rod worth are determined and compared.

  13. Inter-Comparison of NPP/CrIS with AIRS and IASI

    Science.gov (United States)

    Wang, L.; Han, Y.; Weng, F.; Goldberg, M.

    2012-12-01

    The Cross-track Infrared Sounder (CrIS) on the newly-launched Suomi National Polar-orbiting Partnership (Suomi NPP) and future Joint Polar Satellite System (JPSS) is a Fourier transform spectrometer that provides soundings of the atmosphere with 1305 spectral channels, over 3 wavelength ranges: LWIR (9.14 - 15.38 μm); MWIR (5.71 - 8.26 μm); and SWIR (3.92 - 4.64 μm). An accurate spectral and radiometric calibration as well as geolocation is fundamental for CrIS radiance Sensor Data Records (SDRs). In this study, through inter- and intra-satellite calibration efforts, we focus on assessment of NPP/CrIS post-launch radiometric and spectral calibration. The purpose of this study is to use inter-calibration technologies to quantify the CrIS calibration bias and uncertainties. We will compare CrIS hyperspectral radiance measurements with the Atmospheric Infrared Sounder (AIRS) on NASA Earth Observing System (EOS) Aqua and Infrared Atmospheric Sounding Interferometer (IASI) on Metop-A and -B to examine spectral and radiometric consistence and difference among three hyperspectral IR sounders. The newly-launched CrIS on Suomi NPP, combined with AIRS and IASI, provide the first-ever inter-calibration opportunity because three hyperspectral IR sounders can observe the Earth and Atmosphere at the same spectral regions from different satellites. We will directly compare CrIS with AIRS and IASI at orbital crossing points of satellites occurring at high latitudes, the so-called simultaneous nadir overpasses (SNO). The CrIS, AIRS, and IASI spectra will be processed at common grids and then the spectral differences will be computed. In addition, an accurate collocation algorithm has been developed to collocate high spatial resolution measurements from the Visible Infrared Imager Radiometer Suite (VIIRS) within each CrIS Field of View (FOV). The collocated VIIRS radiances will be used to characterize the homogeneity of CrIS FOVs to further reduce comparison uncertainties

  14. MORE: Management of requirements in NPP modernisation projects. Project report 2007

    Energy Technology Data Exchange (ETDEWEB)

    Fredriksen, R.; Katta, V.; Raspotnig, C. [Institutt for energiteknikk (IFE) (Norway); Valkonen, J. [Technical Research Centre of Finland (VTT) (Finland)

    2008-03-15

    This report documents the work and related activities of the MORE project in the period January 1 - December 31 in 2007. The focus of this report is on improvements of the former project results, to identify and apply a couple of case studies from NPP projects, and activities in order to initiate and implement the industrial take-up and utilisation of the research results in real modernisation projects. The report also provides a brief description of the extended industrial network and disseminations of the results in Nordic and NKS related events such as seminars and workshops. (au)

  15. Procedure and method of Equipment Qualification(EQ) for EPA in NPP

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Sun Chul; Bhang, Keug Jin; Kang, Pil Sun [KHNP Central Research Institute, Daejeon (Korea, Republic of)

    2012-10-15

    The Electric Penetration Assemblies(EPAs) for NPP are usually used for medium voltage power, low voltage power, low voltage control and instrumentation. Field cables either interface with the EPAs using electrical connectors or are terminated to penetration lead wires using splices or terminal blocks. These EPAs provide two critical and distinct functions, which are the electrical continuity, insulation and the containment pressure integrity. EPAs insulation resistance or impedance characteristics may be critical in instrument applications. The following design shows a typical modular unit design. In this paper, we analyze the codes and procedures of the equipment qualification test and propose test items, conditions, and acceptance criteria more specifically.

  16. Consideration of MAAP 5.0.2 ESF Model Characteristics for APR1400 NPP

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Mi Ro; Kim, Hyeong Taek [KHNP-CRI, Daejeon (Korea, Republic of)

    2014-10-15

    After the Fukushima accident, EPRI has developed the MAAP (Modular Accident Analysis Program) version 5 that is expected to make up the limitation of MAAP4, that is to say, the appropriateness of the model for the severe accident phenomena and the applicability to the phenomena in the spent fuel pool and the halfloop operation. Up to now, the newest version of MAAP is 5.0.2 (Build 5020000) that was released officially in December, 2013. In addition to this, it is expected that MAAP 5.0.3 version will be published sooner or later. As a kind of post-Fukushima measures, KHNP is developing the probabilistic safety assessment (PSA) and severe accident management guideline (SAMG) for low power and shutdown (LPSD) mode and MAAP 5.0.2 should be used in these projects as a major analysis program. So, first of all, it is necessary that the parameter file for domestic NPP should be upgraded as current Ver. MAAP4 to Ver. MAAP 5.0.2. KHNP has developed the draft version of parameter file for APR1400 type NPP and is being upgraded continuously. The Engineering Safety Features (ESF) model is one of the unique features of MAAP. In this study, we try to share the general information of the MAAP ESF model and the specific characteristics of APR1400 ESF model based on the newly developed MAAP 5.0.2 parameter file. Currently, while developing the LPSD PSA and LPSD SAMG as a kind of post-Fukushima measures, KHNP have the plan in order to upgrade the old parameter file based on MAAP4 to that based on MAAP5.0.2 for all domestic nuclear power plants. And, as the first effort, we are developing the MAAP 5.0.2 parameter file for APR1400 type NPP. In this study, we tried to develop the more accurate and reasonable ESF model of APR1400. In this process, we can find the distinctions and characteristics of specific ESF model and generalized ESF model of MAAP5.0.2. Also, we can eliminate the confusing concepts existed in the two models. So, it is judged that the newly developed MAAP5

  17. Site selection for new nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Rizzo, Paul C.; Dubinsky, Melissa; Tastan, Erdem Onur, E-mail: paul.rizzo@rizzoassoc.com, E-mail: melissa.dubinsky@rizzoassoc.com, E-mail: onur.tastan@rizzoassoc.com [RIZZO Associates Inc., Pittsburgh, PA (United States); Miano, Sandra C., E-mail: scm27@psu.edu [Eletrobras Termonuclear S.A. (ELETRONUCLEAR), RJ (Brazil); Pennsylvania State University, Department of Mechanical and Nuclear Engineering, State College, PA (United States)

    2015-07-01

    The current methodology for selecting the most advantageous site(s) for nuclear power plant (NPP) development is based on the latest evolution of protocols originally established in the 1990's by the Electric Power Research Institute (EPRI) and others for programs in the USA, and more recently by the International Atomic Energy Agency (IAEA), among others. The methodology includes protocols that account for lessons learned from both the Gen III projects and the catastrophic event at Fukushima, Japan. In general, the approach requires consideration of Exclusionary or 'fatal flaw' Criteria first, based on safety as well as significant impact to the environment or human health. Sites must meet all of these Exclusionary Criteria to be considered for NPP development. Next, the remaining sites are evaluated for Avoidance Criteria that affect primarily ease of construction and operations, which allow a ranking of sites best suited for NPP development. Finally, Suitability Criteria are applied to the potential sites to better differentiate between closely ranked sites. Generally, final selection of a Preferred and an Alternate Site will require balancing of factors, expert judgment, and client input, as sites being compared will differ in their scores associated with different Avoidance Criteria and Suitability Criteria. RIZZO Associates (RIZZO) offers in this paper a modification to this methodology for selecting the site for NPP development, which accords to the categories of Exclusionary, Avoidance and Suitability Criteria strict definitions which can be considered as Absolute Factors, Critical Factors, and Economic Factors for a more focused approach to site selection. Absolute Factors include all of the safety-related Exclusionary Criteria. Critical Factors are those that are difficult to overcome unless extraordinary mitigation measures are implemented; they have a significant impact on the ability of the project to be successful and may cause the

  18. Modeling the critical safety functions status tree of a NPP using FPGA

    Energy Technology Data Exchange (ETDEWEB)

    Farias, Marcos Santana; Oliveira, Mauro Vitor de; Jaime, Guilherme Dutra Gonzaga; Almeida, Jose Carlos Soares de; Augusto, Silas Cordeiro, E-mail: msantana@ien.gov.br, E-mail: mvitor@ien.gov.br, E-mail: gdjaime@ien.gov.br, E-mail: jcsa@ien.gov.br, E-mail: silas@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Divisao de Engenharia Nuclear

    2013-07-01

    Field Programmable Gate Arrays (FPGAs) based systems and equipment are beginning to appear in new plants I and C applications, as well as in retrofits for operating plants, in particular for safety applications due to their capability to face the systems obsolescence since they are circuit independent. The circuits implemented can be portable to different FPGAs architectures. Moreover, they reduce complexity for regulatory approval as compared to conventional microprocessor-based systems. Critical safety function (CSF) is the most significant design concept for prioritize operator actions for NPP based on the potential threat to the three barriers (fuel cladding, primary coolant system boundary, and containment) and allows the operator to respond to these threats prior to event diagnosis. CSF has a hierarchical information structure that organizes the system variables affecting the plant safety in terms of goal-means relations. This paper describes the application of FPGA in the implementation of the CSFs status tree logic for a Westinghouse 3-loops NPP simulator. (author)

  19. Reactor Dosimetry Aspects of the Service Life Extension of the Hungarian Paks NPP

    Directory of Open Access Journals (Sweden)

    Zsolnay Eva M.

    2016-01-01

    Full Text Available The service life of the Hungarian Paks Nuclear Power Plant (NPP will be extended from the originally planned 30 years to 50 years. To improve the reliability of the results obtained in frame of the old reactor pressure vessel (RPV surveillance programme, new methods have been developed, and based on them, the old exposition data have been re-evaluated for all the four reactor units. At the same time, a new RPV surveillance programme has been developed and introduced, and long term irradiations have been performed to determine the radiation damage of the surveillance specimens due to the high fast neutron exposition. Neutron transport calculations have been performed with a validated neutron transport code system to determine the fast neutron exposition of the RPVs during the extended service life. The cavity dosimetry is in the introductory phase. This paper presents the new developments in the field of the RPV surveillance dosimetry and summarises the results obtained. According to the results the service life of the NPP can safely be extended for the planned 50 years.

  20. RADIATION CONDITIONS IN KALUGA REGION 30 YEARS AFTER CHERNOBYL NPP ACCIDENT

    Directory of Open Access Journals (Sweden)

    A. G. Ashitko

    2016-01-01

    Full Text Available The article describes radiation conditions in the Kaluga region 30 years after the Chernobyl NPP accident. The Chernobyl NPP accident caused radioactive contamination of nine Kaluga region territories: Duminichsky, Zhizdrinsky, Kuibyshevsky, Kirovsky, Kozelsky, Ludinovsky, Meshchovsky, Ulyanovsky and Hvastovichsky districts. Radioactive fallout was the strongest in three southern districts: Zhizdrinsky, Ulyanovsky and Hvastovichsky, over there cesium-137 contamination density is from 1 to 15Ci/km. According to the Russian Federation Government Order in 2015 there are 300 settlements (S in the radioactive contamination zone, including 14 settlements with caesium-137 soil contamination density from 5 to 15 Ci/ km2 and 286 settlements with the contamination density ranging from 1 to 5 Ci/km2. In the first years after the Chernobyl NPP accident in Kaluga region territories, contaminated with caesium-137, there were introduced restrictive land usage, were carried out agrochemical activities (ploughing, mineral fertilizer dressing, there was toughened laboratory radiation control over the main doze-forming foodstuff. All these measures facilitated considerable decrease of caesium-137 content in local agricultural produce. Proceeding from the achieved result, in 2002 there took place the transition to more tough requirements SanPiN 2.3.2.1078-01. Analysis of investigated samples from Zhizdrinsky, Ulyanovsky and Hvastovichsky districts demonstrated that since 2005 meat samples didn’t exceed the standard values, same for milk samples since 2007. Till the present time, the use of wild-growing mushrooms, berries and wild animals meat involves radiation issues. It was demonstrated that average specific activity of caesium-137 in milk samples keeps decreasing year after year. Long after the Chernobyl NPP accident, the main products forming internal irradiation doses in population are the wild-growing mushrooms and berries. Population average annual

  1. Modelling the current and future spatial distribution of NPP in a Mediterranean watershed

    Science.gov (United States)

    Donmez, Cenk; Berberoglu, Suha; Curran, Paul J.

    2011-06-01

    The aim of this study is to use full spatial resolution Envisat MERIS data to drive an ecosystem productivity model for pine forests along the Mediterranean coast of Turkey. The Carnegie, Ames, Stanford Approach (CASA) terrestrial biogeochemical model, designed to simulate the terrestrial carbon cycle using satellite sensor and meteorological data, was used to estimate annual regional fluxes in terrestrial net primary productivity (NPP). At its core this model is based on light-use efficiency, influenced by temperature, rainfall and solar radiation. Present climate data was generated from 50 climate stations within the watershed using co-kriging. Regional scale pseudo-warming data for year 2070 were derived using a Regional Climate Model (RCM) these data were used to downscale the GCM General Circulation Model for the research area as part of an international research project called Impact of Climate Changes on Agricultural Production Systems in Arid Areas (ICCAP). Outputs of climate data can be moderated using the four variables of percent tree cover, land cover, soil texture and NDVI. This study employed 47 MERIS images recorded between March 2003 and September 2005 to derive percent tree cover, land cover and NDVI. Envisat MERIS data hold great potential for estimating NPP with the CASA model because of the appropriateness of both its spatial and its spectral resolution.

  2. Information technologies in radioactive waste management, applied in NPP-Kozloduy, Bulgaria

    Energy Technology Data Exchange (ETDEWEB)

    Jeliazkov, J.; Jeliazkova, L.; Atanasov, Sv. [BALBOK Co., Sofia (Bulgaria)

    1994-12-31

    Radioactive waste (RAW) management in NPP is a complex problem, that can be considered as a combination of sub problems, for example scientific, administrative, social, economical, etc. The separate examination of these sub problems does not lead to creation of overall system for optimal RAW management. There`s no doubt that such an administrative system, supported by information technologies, should present in every one existing and planned nuclear power plant to optimize its operation as a whole, not only separate elements. The aim is to avoid the fallacy of the single and the complex. This paper presents a basic part of the whole information management system as defined above that concerns RAW management. The information management system is prepared for NPP-Kozloduy, Bulgaria by means of modern concepts and technological schemes and is aimed to help the administrative personnel in this very important activity - RAW management. On the base of objective data about the available waste and prognoses about arisings in the future, on the base of chosen technologies and equipment the system gives multi-variant plan for treatment, processing and disposal of waste, after the choice of a variant it monitors its application in the practice.

  3. Methodology and measures for preventing unacceptable flow-accelerated corrosion thinning of pipelines and equipment of NPP power generating units

    Science.gov (United States)

    Tomarov, G. V.; Shipkov, A. A.; Lovchev, V. N.; Gutsev, D. F.

    2016-10-01

    Problems of metal flow-accelerated corrosion (FAC) in the pipelines and equipment of the condensate- feeding and wet-steam paths of NPP power-generating units (PGU) are examined. Goals, objectives, and main principles of the methodology for the implementation of an integrated program of AO Concern Rosenergoatom for the prevention of unacceptable FAC thinning and for increasing operational flow-accelerated corrosion resistance of NPP EaP are worded (further the Program). A role is determined and potentialities are shown for the use of Russian software packages in the evaluation and prediction of FAC rate upon solving practical problems for the timely detection of unacceptable FAC thinning in the elements of pipelines and equipment (EaP) of the secondary circuit of NPP PGU. Information is given concerning the structure, properties, and functions of the software systems for plant personnel support in the monitoring and planning of the inservice inspection of FAC thinning elements of pipelines and equipment of the secondary circuit of NPP PGUs, which are created and implemented at some Russian NPPs equipped with VVER-1000, VVER-440, and BN-600 reactors. It is noted that one of the most important practical results of software packages for supporting NPP personnel concerning the issue of flow-accelerated corrosion consists in revealing elements under a hazard of intense local FAC thinning. Examples are given for successful practice at some Russian NPP concerning the use of software systems for supporting the personnel in early detection of secondary-circuit pipeline elements with FAC thinning close to an unacceptable level. Intermediate results of working on the Program are presented and new tasks set in 2012 as a part of the updated program are denoted. The prospects of the developed methods and tools in the scope of the Program measures at the stages of design and construction of NPP PGU are discussed. The main directions of the work on solving the problems of flow

  4. Segmentation of the internal of the Reactor Jose Cabrera NPP; Segmentacion de los Internos del Reactor CN Jose Cabrera

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez silva, M.; Borque Linan, J.

    2013-07-01

    The Plan of dismantling and decommissioning of the Jose Cabrera NPP represents the first total dismantling of a nuclear power station in Spain (level 3 of the IAEA). Complete disassembly of the different components of the primary circuit (internal reactor vessel, pusher, generator of steam, etc.) represents a differential activity against previous projects of dismantling The segmentation of the inmates of the reactor under water using tele operators cutting tools in the spent fuel pit, has been a challenge from the technological point of view as well as a critical activity in the framework of the radiological dis-assemblies associated to the Plan of dismantling and Decommissioning of the Jose Cabrera NPP.

  5. Observed half-lives of {sup 3}H, {sup 90}Sr and {sup 137}Cs in hydrosphere in the Vltava River basin and impact of NPP Temelin (Bohemia)

    Energy Technology Data Exchange (ETDEWEB)

    Hanslik, E.J.; Ivanovova, D.; Sedlarova, B.; Simonek, P. [T. G. Masaryk Water Research Institute, Prague (Czech Republic); Krizova-Jedinakova, V. [Institute of Chemical Technology, Technicka 6, Prague (Czech Republic)

    2004-07-01

    Observation of reference conditions on the Upper Vltava River in the period before construction of Temel Nuclear Power Plant (NPP) was focused on examination of concentrations of artificial radionuclides {sup 3}H, {sup 90}Sr and {sup 137}Cs in components of the hydrosphere. Concentrations of these radionuclides were observed in water from tributaries to Orl Reservoir, which will be a receiving water body of waste waters from the NPP, and also in the water at outflow from the reservoir. Concentrations of radionuclides {sup 90}Sr, {sup 137}Cs and {sup 134}Cs were examined in samples of sediments, biomass of aquatic flora and fish species. Concentrations of {sup 3}H were also analysed in samples of precipitation water collected at three stations located in the vicinity of the NPP. For ensuring complete information, the observation of the radionuclides included also resources of drinking water and sludge from water treatment plants sited close to the NPP [1]. The observation has been continued [2]. The tritium concentrations were determined by using LSC method on Quantulus device, gamma spectrometric method on Canberra device was used for {sup 137}Cs and {sup 134}Cs, and {sup 90}Sr was determined by a standard method after radiochemical separation like {sup 90}Y. The results of the observation were used for derivation of decreasing trends in the concentrations of the radionuclides. It was demonstrated that kinetic equation of the 1. order can provide good description of the process. Concentrations of {sup 137}Cs in surface water exhibited two phases of decrease. The first one, which lasted until 1994, was faster. The observed half-life values were in the range between 1.1 and 2.2 years. The half-life values during the slower second phase, which began in 1995, are between 8.6 and 32.2 years. Concentrations of {sup 90}Sr in the water were monotonously decreasing with half-lives of 6.8 years in the period 1963 - 1968 and 6.7 years in the period 1993 - 2001. Gradient of a

  6. Climate change impacts on net primary production (NPP) and export production (EP) regulated by increasing stratification and phytoplankton community structure in the CMIP5 models

    Science.gov (United States)

    Fu, Weiwei; Randerson, James T.; Moore, J. Keith

    2016-09-01

    We examine climate change impacts on net primary production (NPP) and export production (sinking particulate flux; EP) with simulations from nine Earth system models (ESMs) performed in the framework of the fifth phase of the Coupled Model Intercomparison Project (CMIP5). Global NPP and EP are reduced by the end of the century for the intense warming scenario of Representative Concentration Pathway (RCP) 8.5. Relative to the 1990s, NPP in the 2090s is reduced by 2-16 % and EP by 7-18 %. The models with the largest increases in stratification (and largest relative declines in NPP and EP) also show the largest positive biases in stratification for the contemporary period, suggesting overestimation of climate change impacts on NPP and EP. All of the CMIP5 models show an increase in stratification in response to surface-ocean warming and freshening, which is accompanied by decreases in surface nutrients, NPP and EP. There is considerable variability across the models in the magnitudes of NPP, EP, surface nutrient concentrations and their perturbations by climate change. The negative response of NPP and EP to increasing stratification reflects primarily a bottom-up control, as upward nutrient flux declines at the global scale. Models with dynamic phytoplankton community structure show larger declines in EP than in NPP. This pattern is driven by phytoplankton community composition shifts, with reductions in productivity by large phytoplankton as smaller phytoplankton (which export less efficiently) are favored under the increasing nutrient stress. Thus, the projections of the NPP response to climate change are critically dependent on the simulated phytoplankton community structure, the efficiency of the biological pump and the resulting levels of regenerated production, which vary widely across the models. Community structure is represented simply in the CMIP5 models, and should be expanded to better capture the spatial patterns and climate-driven changes in export

  7. A Cloud-Based Infrastructure for Near-Real-Time Processing and Dissemination of NPP Data

    Science.gov (United States)

    Evans, J. D.; Valente, E. G.; Chettri, S. S.

    2011-12-01

    We are building a scalable cloud-based infrastructure for generating and disseminating near-real-time data products from a variety of geospatial and meteorological data sources, including the new National Polar-Orbiting Environmental Satellite System (NPOESS) Preparatory Project (NPP). Our approach relies on linking Direct Broadcast and other data streams to a suite of scientific algorithms coordinated by NASA's International Polar-Orbiter Processing Package (IPOPP). The resulting data products are directly accessible to a wide variety of end-user applications, via industry-standard protocols such as OGC Web Services, Unidata Local Data Manager, or OPeNDAP, using open source software components. The processing chain employs on-demand computing resources from Amazon.com's Elastic Compute Cloud and NASA's Nebula cloud services. Our current prototype targets short-term weather forecasting, in collaboration with NASA's Short-term Prediction Research and Transition (SPoRT) program and the National Weather Service. Direct Broadcast is especially crucial for NPP, whose current ground segment is unlikely to deliver data quickly enough for short-term weather forecasters and other near-real-time users. Direct Broadcast also allows full local control over data handling, from the receiving antenna to end-user applications: this provides opportunities to streamline processes for data ingest, processing, and dissemination, and thus to make interpreted data products (Environmental Data Records) available to practitioners within minutes of data capture at the sensor. Cloud computing lets us grow and shrink computing resources to meet large and rapid fluctuations in data availability (twice daily for polar orbiters) - and similarly large fluctuations in demand from our target (near-real-time) users. This offers a compelling business case for cloud computing: the processing or dissemination systems can grow arbitrarily large to sustain near-real time data access despite surges in

  8. Land and Cryosphere Products from Suomi NPP VIIRS: Overview and Status

    Science.gov (United States)

    Roman, M. O.; Justice, C. O.; Csiszar, I. A.; Vermote, E.; Wolfe, R. E.; Hook, S. J.; Friedl, M. A.; Schaaf, C.; Wang, Z.; Miura, T.; Tschudi, M. A.; Riggs, G. A.; Hall, D. K.; Lyapustin, A.; Devadiga, S.; Davidson, C.; Masuoka, E. J.

    2013-12-01

    The Visible Infrared Imaging Radiometer Suite (VIIRS) instrument was launched in October 2011 as part of the Suomi National Polar-orbiting Partnership (S-NPP). The VIIRS instrument was designed to improve upon the capabilities of the operational Advanced Very High Resolution Radiometer (AVHRR) and provide observation continuity with NASA's Earth Observing System's (EOS) Moderate Resolution Imaging Spectroradiometer (MODIS). Since the VIIRS first-light images were received in November 2011, NASA and NOAA funded scientists have been working to evaluate the instrument performance and generate land and cryosphere products which would meet the needs of the NOAA operational users and the NASA science community. NOAA's focus has been on refining a suite of operational products known as Environmental Data Records (EDRs), which were developed according to project specifications under the National Polar-orbiting Environmental Satellite System (NPOESS). The NASA S-NPP Science Team has focused on evaluating the EDRs for science use and developing and testing additional products to meet science data needs and provide MODIS data product continuity. This paper will present the findings to-date of the NASA Science Team's evaluation of the VIIRS Land and Cryosphere EDRs, specifically Surface Reflectance, Land Surface Temperature, Surface Albedo, Vegetation Indices, Surface Type, Active Fires, Snow Cover, Ice Surface Temperature, and Sea Ice Characterization. To achieve the stated goal of MODIS data continuity and the establishment of long-term data records through VIIRS, it is important to start now to use S-NPP to establish a pathway to science use of VIIRS data in the JPSS era. One year after launch, initial instrument and operational product evaluations are now ending and the next step is to build on the success of the MODIS Adaptive Processing System (MODAPS) and the Land Product Evaluation and Analysis Tool Element (PEATE) data processing and generate and distribute high

  9. Selection of optimal treatment procedures for non-standard radioactive waste arising from decommissioning of NPP after accident

    Energy Technology Data Exchange (ETDEWEB)

    Strážovec, Roman, E-mail: strazovec.roman@javys.sk [Institute of Nuclear and Physical Engineering, Slovak University of Technology in Bratislava, Ilkovičova 3, 812 19 Bratislava (Slovakia); JAVYS, a.s., Tomášikova 22, 821 02 Bratislava (Slovakia); Hrnčíř, Tomáš [DECOM, a.s., Sibírska 1, 917 01 Trnava (Slovakia); Lištjak, Martin [Institute of Nuclear and Physical Engineering, Slovak University of Technology in Bratislava, Ilkovičova 3, 812 19 Bratislava (Slovakia); VUJE, a.s., Okružná 5, 918 64 Trnava (Slovakia); Nečas, Vladimír [Institute of Nuclear and Physical Engineering, Slovak University of Technology in Bratislava, Ilkovičova 3, 812 19 Bratislava (Slovakia)

    2016-05-15

    The decommissioning of nuclear power plants is becoming a standard industrial activity where the optimization processes of partial activities are inevitable mainly for technical and economic reasons. In Slovakia, the decommissioning of A1 NPP is very specific case because A1 NPP is rare type of NPP (prototype) and furthermore its operation was affected by the accident. A large number of specific non-standard radioactive waste, such as long-time storage cases (hereinafter LSC), that is not usually present within the decommissioning projects of NPP with a regular termination of operation, represent one of the significant consequences of the accident and issues arisen from follow-up activities. The presented article describes the proposal of processing and conditioning of non-standard radioactive waste (such as LSC), together with description of methodology applied in the proposal for update of waste acceptance criteria for the processing and conditioning of radioactive waste (hereinafter RAW) within Bohunice Radioactive waste Treatment and Conditioning Centre (hereinafter RWTC). The results of performed detailed analysis are summarized into new waste acceptance criteria for technological lines keeping in mind safety principles and requirements for protection of operating personnel, the public and the environment.

  10. 76 FR 46330 - NUREG-1934, Nuclear Power Plant Fire Modeling Application Guide (NPP FIRE MAG); Second Draft...

    Science.gov (United States)

    2011-08-02

    ... COMMISSION NUREG-1934, Nuclear Power Plant Fire Modeling Application Guide (NPP FIRE MAG); Second Draft... for public comment a document entitled, NUREG-1934 (EPRI 1023259), ``Nuclear Power Plant Fire Modeling... pdr.resource@nrc.gov . NUREG-1934 (EPRI 1023259), ``Nuclear Power Plant Fire Modeling...

  11. Study of Degradation Processes in Dielectric Materials Used in Electronic Control Equipment Operated in ``Kozloduy'' NPP

    Science.gov (United States)

    Naydenov, Nayden; Popov, Angel

    2007-04-01

    The electronic equipment for control of different systems of Units 5 and 6 is studied for presence of degradation processes occurring in result of continuous usage in conditions of controlled radiation background in compliance with ``Kozloduy'' NPP safety codes. Systems, operated in a continuous mode in the course of about 10 years were chosen - separate units containing different dielectric materials (varnish coating, circuit board bases, cable insulations, electro protective elements, etc.) were extrapolated. Series of test samples were prepared which were connected with flat or coaxial condensers and their characteristic parameters were measured: tgδ, ɛ, low voltage conductivity and leak currents at voltages that exceed the working ones several times. When comparing the obtained data with the reference ones, a conclusion is made about the effectiveness of electric ageing during operation in the course of time.

  12. Sulfate and Chloride Resistance of High Fluidity Concrete including Fly Ash and GGBS for NPP

    Energy Technology Data Exchange (ETDEWEB)

    Noh, Jea Myoung; Cho, Myung Sug [KEPCO Research Institute, Daejeon (Korea, Republic of)

    2010-10-15

    Fly ash mixed concrete has been used for NPP concrete structures in Korea in order to prevent aging and improve durability since the Shin.Kori no.1,2 in 2005. Concentrated efforts to develop technology for the streamlining of construction work and to affect labor savings have been conducted in construction. The application of high fluidity concrete for nuclear power plants has been the research subject with the aim of further rationalization of construction works. Since high fluidity concrete can have the characteristics of high density and high strength without compaction. However, high fluidity concrete can cause thermal cracking by heat of hydration. For this reason, the amount of pozzolan binder should be increased in high fluidity concrete for nuclear power plants. In this study, the resistance of high fluidity concrete on sulfate and chloride was compared with that of the concrete currently using for nuclear power plants

  13. Photovoltaic characteristics of n(+)pp(+) InP solar cells grown by OMVPE

    Science.gov (United States)

    Tyagi, S.; Singh, K.; Bhimnathwala, H.; Ghandhi, S. K.; Borrego, J. M.

    1990-01-01

    The photovoltaic characteristics of n(+)/p/p(+) homojunction InP solar cells fabricated by organometallic vapor-phase epitaxy (OMVPE) are described. The cells are characterized by I-V, C-V and quantum efficiency measurements, and simulations are used to obtain various device and material parameters. The I-V characteristics show a high recombination rate in the depletion region; this is shown to be independent of the impurity used. It is shown that cadmium is easier to use as an acceptor for the p base and p(+) buffer and is therefore beneficial. The high quantum efficiency of 98 percent at long wavelengths measured in these cells indicates a very good collection efficiency in the base. The short-wavelength quantum efficiency is poor, indicating a high surface recombination.

  14. Automatic system for air flow control in air-tight chambers of the NPP primary circuit

    Energy Technology Data Exchange (ETDEWEB)

    Bersenev, V.L.; Bagautdinov, Z.S.; Panov, S.Yu.

    1985-01-01

    A system for automatic control of air flows is briefly described which is based on a tensometric flow rate sensor. A sensitive element of the sensor, made of paper-based laminate, under the effect of incoming air flow travels, causing a bending of an elastic element, made of stainless steel. The deformation causes changes in the electric resistance of tensoresistors, the degree of a change being proportional to the air flow rate. A 400 Ohm tensoresistor is used in the sensor. Errors in the flow rate measurement using the tensometric sensor does not exceed +-3% even in the low rate air flow range. The system, tested at the Beloyarsk NPP, has shown a high reliability and accuracy of measurements, which permits to recommend it for the use in technological ventilation of NPPs.

  15. Developing Land Surface Type Map with Biome Classification Scheme Using Suomi NPP/JPSS VIIRS Data

    Science.gov (United States)

    Zhang, Rui; Huang, Chengquan; Zhan, Xiwu; Jin, Huiran

    2016-08-01

    Accurate representation of actual terrestrial surface types at regional to global scales is an important element for a wide range of applications, such as land surface parameterization, modeling of biogeochemical cycles, and carbon cycle studies. In this study, in order to meet the requirement of the retrieval of global leaf area index (LAI) and fraction of photosynthetically active radiation absorbed by the vegetation (fPAR) and other studies, a global map generated from Suomi National Polar- orbiting Partnership (S-NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) surface reflectance data in six major biome classes based on their canopy structures, which include: Grass/Cereal Crops, Shrubs, Broadleaf Crops, Savannas, Broadleaf Forests, and Needleleaf Forests, was created. The primary biome classes were converted from an International Geosphere-Biosphere Program (IGBP) legend global surface type data that was created in previous study, and the separation of two crop types are based on a secondary classification.

  16. Chemical mode in secondary circuit of the Dukovany NPP units after TG condensers replacement

    Energy Technology Data Exchange (ETDEWEB)

    Kopriva, M.; Shejbal, J.; Petrecky, I. [Dukovany NPP (Czech Republic)

    2002-07-01

    The increase of the pH of SG feedwater on the 1. unit of Dukovany NPP led to enhancement of chemical mode of secondary circuit, what was identified in particular by the following: Reduction of concentration of iron in SG feedwater, Reduction of concentration of Sodium and Sulfates in SG blowdown water. This reduction is caused by shutdown of CPS thus by elimination of release of Na ions and SO{sub 4} from wrong operated ion-exchangers and their subsequent regeneration (part of cation exchanger in Na form and part of anion exchanger in SO{sub 4} form). Reduction of the WANO SG chemical index to the minimum theoretical value. It will be necessary to change criteria characterizing this index or to introduce our own modified index. In relation to CPS shutdown the costs for operating chemicals and for demineralized flushing water were reduced. (authors)

  17. Radiation safety control on Ulchin NPP Unit 1 s/g sleeving

    Energy Technology Data Exchange (ETDEWEB)

    Kim, S. T.; Jang, Y. S. [KEPCO Ulchin Nuclear Power Plant Units 1, 2, Kyongsangbukdo (Korea, Republic of)

    1999-07-01

    Ulchin NPP unit 1 has been entered its tenth operation year. As the operation years went by, S/G tubes' defects have been reported, which was analyzed mainly due to PWSCC through ECT and various studies. In the ninth overhaul, technical staffs of Ulchin unit 1 decided to do sleeve installation for defected tubes. This sleeve installation was a second experience on our plant in KEPCO. The sleeving tubes were estimated to 600 pieces, but increased to 987 pieces by ECT results. As the sleeve installation was performed in high radiation level, we have considered various radiation safety, i e. protection of radiation source and internal exposure. The collective radiation exposure dose was recorded to 142.32 man-mSv and no internal exposed person was discovered. But there are some requirements to improve radiation safety for reducing exposure dose to radiation. PWSCC : Primary Water Side Stress Corrosion Crack (author)

  18. Retrospective Dosimetry of Vver 440 Reactor Pressure Vessel at the 3RD Unit of Dukovany Npp

    Science.gov (United States)

    Marek, M.; Viererbl, L.; Sus, F.; Klupak, V.; Rataj, J.; Hogel, J.

    2009-08-01

    Reactor pressure vessel (RPV) residual lifetime of the Czech VVER-440 is currently monitored under Surveillance Specimens Programs (SSP) focused on reactor pressure vessel materials. Neutron fluence in the samples and its distribution in the RPV are determined by a combination of calculation results and the experimental data coming from the reactor dosimetry measurements both in the specimen containers and in the reactor cavity. The direct experimental assessment of the neutron flux density incident onto RPV and neutron fluence for the entire period of nuclear power plant unit operation can be based on the evaluation of the samples taken from the inner RPV cladding. The Retrospective Dosimetry was also used at Dukovany NPP at its 3rd unit after the 18th cycle. The paper describes methodology, experimental setup for sample extraction, measurement of activities, and the determination of the neutron flux and fluence averaged over the samples.

  19. ELECTRICALLY CONDUCTIVE OF NANOCOMPOSITES FOR SYSTEMS DIAGNOSTICS OF THE ENVELOPE WALLS TECHNICAL CONDITION OF NPP

    Directory of Open Access Journals (Sweden)

    BOLSHAKOV V. I.

    2016-05-01

    Full Text Available Raising of the problem. Enveloped concrete wall type structures of localizing safety systems for restaint and localization of radioactive decay products or in the case of special natural or man-made impacts on the power unit is one of the most important components to ensure the safety of nuclear power. The promising direction for the development of the NPP technical system monitoring is to use conductive nanocomposites as primary elements of information. The purpose of the article is to review the theoretical background and experience in the conductive nanocomposites creating for diagnostics of localizing nuclear safety systems. Conclusions. A promising area for the development of diagnostic systems of localizing nuclear safety systems is the use of electrically conductive nanocomposites (conductive concrete - bethels, plasters, paint coatings. A mechanism for conductive nanocomposites creating is the use of the filler metal and carbon nanoparticles. As binders is promising to use nanocomposites of the mineral binders (cement and water glass.

  20. NIRS external dose estimation system for Fukushima residents after the Fukushima Dai-ichi NPP accident

    Science.gov (United States)

    Akahane, Keiichi; Yonai, Shunsuke; Fukuda, Shigekazu; Miyahara, Nobuyuki; Yasuda, Hiroshi; Iwaoka, Kazuki; Matsumoto, Masaki; Fukumura, Akifumi; Akashi, Makoto

    2013-04-01

    The great east Japan earthquake and subsequent tsunamis caused Fukushima Dai-ichi Nuclear Power Plant (NPP) accident. National Institute of Radiological Sciences (NIRS) developed the external dose estimation system for Fukushima residents. The system is being used in the Fukushima health management survey. The doses can be obtained by superimposing the behavior data of the residents on the dose rate maps. For grasping the doses, 18 evacuation patterns of the residents were assumed by considering the actual evacuation information before using the survey data. The doses of the residents from the deliberate evacuation area were relatively higher than those from the area within 20 km radius. The estimated doses varied from around 1 to 6 mSv for the residents evacuated from the representative places in the deliberate evacuation area. The maximum dose in 18 evacuation patterns was estimated to be 19 mSv.

  1. Analysis of World Nuclear Market and Strategy of Korean NPP's Competitiveness Improvement for Exportation

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae Young; Jeong, Yong Hoon [KAIST, Daejeon (Korea, Republic of); Roh, Seungkook [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Chang, Soon Heung [Handong Global University, Pohang (Korea, Republic of)

    2016-10-15

    China, India and USA (nuclear adopted countries) are planning tremendous number of NPPs to meet their increasing electricity demand and Saudi Arabia, Vietnam (nuclear adopting countries) are also planning to include nuclear power in their energy mix as a long-term plan. Korea has exported 4 units of APR1400 to the UAE in December, 2009. Korea became sixth NPP supplier country and our economic feasibility and safety features were started to evaluate worldwide. Nuclear industries became a new driver of Korea’s export and nuclear industries in Korea are now expecting another NPP export to Middle-eastern countries, including UAE and Saudi Arabia, based on the first-mover’s advantage at the UAE. In 2000s, five countries (Japan, USA, France, Russia and Korea), which are able to build NPP, focused on NPP export more than domestic construction. Global trend of world nuclear market changed rapidly, especially after NPP export to the UAE. By the global trend, hegemony of nuclear market migrated from supplier country to buyer country. Nuclear companies started cooperating rather than competing. Financing to developing countries become more important. In general, one of the considerable combinations is Korea-Japan-USA alliance. Korea is in charge of EPC, Japan supports financing and deficient technology (with USA partner), and Japan-USA handles fuel supply and back-end fuel cycle based on new agreed terms of ROK-US Nuclear Cooperation Agreement. This combination was judged to best way to collaborate with global companies. Paying attention to many delayed (or potentially delayed) constructions from Russia, intercepting the construction work will be available in case of contracted countries. Korea can emphasize the short construction time, high responsiveness and mild/equal diplomatic position to the target countries.

  2. Acidosis is a key regulator of osteoblast ecto-nucleotidase pyrophosphatase/phosphodiesterase 1 (NPP1) expression and activity.

    Science.gov (United States)

    Orriss, Isabel R; Key, Michelle L; Hajjawi, Mark O R; Millán, José L; Arnett, Timothy R

    2015-12-01

    Previous work has shown that acidosis prevents bone nodule formation by osteoblasts in vitro by inhibiting mineralisation of the collagenous matrix. The ratio of phosphate (Pi ) to pyrophosphate (PPi ) in the bone microenvironment is a fundamental regulator of bone mineralisation. Both Pi and PPi , a potent inhibitor of mineralisation, are generated from extracellular nucleotides by the actions of ecto-nucleotidases. This study investigated the expression and activity of ecto-nucleotidases by osteoblasts under normal and acid conditions. We found that osteoblasts express mRNA for a number of ecto-nucleotidases including NTPdase 1-6 (ecto-nucleoside triphosphate diphosphohydrolase) and NPP1-3 (ecto-nucleotide pyrophosphatase/phosphodiesterase). The rank order of mRNA expression in differentiating rat osteoblasts (day 7) was Enpp1 > NTPdase 4 > NTPdase 6 > NTPdase 5 >  alkaline phosphatase > ecto-5-nucleotidase > Enpp3 > NTPdase 1 > NTPdase 3 > Enpp2 > NTPdase 2. Acidosis (pH 6.9) upregulated NPP1 mRNA (2.8-fold) and protein expression at all stages of osteoblast differentiation compared to physiological pH (pH 7.4); expression of other ecto-nucleotidases was unaffected. Furthermore, total NPP activity was increased up to 53% in osteoblasts cultured in acid conditions (P acidosis. Further studies showed that mineralised bone formation by osteoblasts cultured from NPP1 knockout mice was increased compared with wildtypes (2.5-fold, P acidosis. These results indicate that increased NPP1 expression and activity might contribute to the decreased mineralisation observed when osteoblasts are exposed to acid conditions. © 2015 The Authors. Journal of Cellular Physiology Published by Wiley Periodicals, Inc.

  3. Modeling the dynamics of distribution, extent, and NPP of global terrestrial ecosystems in response to future climate change

    Science.gov (United States)

    Gang, Chengcheng; Zhang, Yanzhen; Wang, Zhaoqi; Chen, Yizhao; Yang, Yue; Li, Jianlong; Cheng, Jimin; Qi, Jiaguo; Odeh, Inakwu

    2017-01-01

    Understanding how terrestrial ecosystems would respond to future climate change can substantially contribute to scientific evaluation of the interactions between vegetation and climate. To reveal the future climate impacts might on the nature and magnitude of global vegetation, the spatiotemporal distribution and net primary productivity (NPP) of global terrestrial biomes and their dynamics in this century were quantitatively simulated and compared by using the improved Comprehensive and Sequential Classification System and the segmentation model. The 33 general circulation models under the four scenarios of Representative Concentration Pathways (RCPs) were utilized to simulate the future climate change. The multi-model ensemble results showed that at the global scale, the distribution of forests and deserts would expand by more than 2% and 4% over this century, respectively. By contrast, more than 11% of grassland regions would shrink. Despite the considerable differences in the simulated responses of the biomes, the poleward movement or expansion of temperate forest were prominent features across all the scenarios. Meanwhile, the terrestrial NPP was projected to increase by 7.44, 9.51, 9.46, and 12.02 Pg DW·a- 1 in 2070s relative to 1970s in the RCP2.6, RCP4.5, RCP6.0, and RCP8.5, respectively. The largest NPP decrease would occur in tundra & alpine steppe. NPP in the Tropical Zone, the North Temperate Zone, and the North Frigid Zone was estimated to increase in this century, whereas NPP in the South Temperate Zone was projected to decrease slightly across all scenarios. Overall, ecosystems in the mid-/high latitudes would be more vulnerable to future climate change in terms of distribution ranges and primary productivity despite the existing uncertainties. Some vegetation would benefit from the warmer and wetter climate. However, most of these plants would suffer and experience irreversible changes, particularly in the northern hemisphere.

  4. Failure Forewarning in NPP Equipment NERI2000-109 Final Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Hively, LM

    2004-03-26

    The objective of this project is forewarning of machine failures in critical equipment at next-generation nuclear power plants (NPP). Test data were provided by two collaborating institutions: Duke Engineering and Services (first project year), and the Pennsylvania State University (Applied Research Laboratory) during the second and third project years. New nonlinear methods were developed and applied successfully to extract forewarning trends from process-indicative, time-serial data for timely, condition-based maintenance. Anticipation of failures in critical equipment at next-generation NPP will improve the scheduling of maintenance activities to minimize safety concerns, unscheduled non-productive downtime, and collateral damage due to unexpected failures. This approach provides significant economic benefit, and is expected to improve public acceptance of nuclear power. The approach is a multi-tiered, model-independent, and data-driven analysis that uses ORNL's novel nonlinear method to extract forewarning of machine failures from appropriate data. The first tier of the analysis provides a robust choice for the process-indicative data. The second tier rejects data of inadequate quality. The third tier removes signal artifacts that would otherwise confound the analysis, while retaining the relevant nonlinear dynamics. The fourth tier converts the artifact-filtered time-serial data into a geometric representation, that is then transformed to a discrete distribution function (DF). This method allows for noisy, finite-length datasets. The fifth tier obtains dissimilarity measures (DM) between the nominal-state DF and subsequent test-state DFs. Forewarning of a machine failure is indicated by several successive occurrences of the DM above a threshold, or by a statistically significant trend in the DM. This paradigm yields robust nonlinear signatures of degradation and its progression, allowing earlier and more accurate detection of the machine failure.

  5. Patterns of NPP, GPP, Respiration and NEP During Boreal Forest Succession

    Energy Technology Data Exchange (ETDEWEB)

    Goulden, Michael L.; McMillan, Andrew; Winston, Greg; Rocha, Adrian; Manies, Kristen; Harden, Jennifer W.; Bond-Lamberty, Benjamin

    2010-12-15

    We deployed a mesonet of year-round eddy covariance towers in boreal forest stands that last burned in ~1850, ~1930, 1964, 1981, 1989, 1998, and 2003 to understand how CO2 exchange changes during secondary succession.The strategy of using multiple methods, including biometry and micrometeorology, worked well. In particular, the three independent measures of NEP during succession gave similar results. A stratified and tiered approach to deploying eddy covariance systems that combines many lightweight and portable towers with a few permanent ones is likely to maximize the science return for a fixed investment. The existing conceptual models did a good job of capturing the dominant patterns of NPP, GPP, Respiration and NEP during succession. The initial loss of carbon following disturbance was neither as protracted nor large as predicted. This muted response reflects both the rapid regrowth of vegetation following fire and the prevalence of standing coarse woody debris following the fire, which is thought to decay slowly. In general, the patterns of forest recovery from disturbance should be expected to vary as a function of climate, ecosystem type and disturbance type. The NPP decline at the older stands appears related to increased Rauto rather than decreased GPP. The increase in Rauto in the older stands does not appear to be caused by accelerated maintenance respiration with increased biomass, and more likely involves increased allocation to fine root turnover, root metabolism, alternative forms of respiration, mycorrhizal relationships, or root exudates, possibly associated with progressive nutrient limitation. Several studies have now described a similar pattern of NEP following boreal fire, with 10-to-15 years of modest carbon loss followed by 50-to-100 years of modest carbon gain. This trend has been sufficiently replicated and evaluated using independent techniques that it can be used to quantify the likely effects of changes in boreal fire frequency and

  6. Application of Mössbauer spectroscopy on corrosion products of NPP

    Science.gov (United States)

    Dekan, J.; Lipka, J.; Slugeň, V.

    2013-04-01

    Steam generator (SG) is generally one of the most important components at all nuclear power plants (NPP) with close impact to safe and long-term operation. Material degradation and corrosion/erosion processes are serious risks for long-term reliable operation. Steam generators of four VVER-440 units at nuclear power plants V-1 and V-2 in Jaslovske Bohunice (Slovakia) were gradually changed by new original "Bohunice" design in period 1994-1998, in order to improve corrosion resistance of SGs. Corrosion processes before and after these design and material changes in Bohunice secondary circuit were studied using Mössbauer spectroscopy during last 25 years. Innovations in the feed water pipeline design as well as material composition improvements were evaluated positively. Mössbauer spectroscopy studies of phase composition of corrosion products were performed on real specimens scrapped from water pipelines or in form of filters deposits. Newest results in our long-term corrosion study confirm good operational experiences and suitable chemical regimes (reduction environment) which results mostly in creation of magnetite (on the level 70 % or higher) and small portions of hematite, goethite or hydrooxides. Regular observation of corrosion/erosion processes is essential for keeping NPP operation on high safety level. The output from performed material analyses influences the optimisation of operating chemical regimes and it can be used in optimisation of regimes at decontamination and passivation of pipelines or secondary circuit components. It can be concluded that a longer passivation time leads more to magnetite fraction in the corrosion products composition.

  7. TRITIUM IN URINE OF PEOPLE LIVING IN THE AREA OF INFLUENCE OF THE BELOYARSKAYA NPP

    Directory of Open Access Journals (Sweden)

    M. Ya. Chebotina

    2016-01-01

    Full Text Available The goal of the research is to determine relationship between tritium concentration in the body fluid (urine of people living in the area of influence of the Beloyarskaya NPP and tritium concentration in drinking water.Materials and methods. Studed population (men and women. Urine samples were collected in the clinical laboratory of a medical unit in Zarechny town. There were 50 individuals in the studied group. Patients were different on age and weight. Water samples were collected in an arbitrary way, through the all study period, from October to November in 2015 year. Tritium concentrations were determined with the ultra-low level liquid scintillation spectrometer Quantulus-1220 (USA. The facility developed by L.G. Bondareva was used for tritium extraction. The method allowes to separate the template, which significantly effects determination of tritium.Results. The urine samples from people living in the area of influence of the Beloyarskaya NPP in Zarechny town were analyzed in the study. There was positive relationship between tritium concentration in drinking water and tritium concentration in urine. Statistically significant correlation between analyzed parameters was found (correlation coefficient 0.98; significance level 0,007. Individual doses were estimated according to Harrison, Khursheed, Lambert. The Doses vary from 0,32 to 1,12 with an allowance for consumption of drinking water 100 l y–1 (according to the consumption standard for the analyzed region, which amounts 0,032–0,12 % from dose limit for population (1 mSv y–1. It was determined what drinking water is the main source of the radionuclide in human body in this region. The determined values of tritium concentration in drinking water are significantly lower than the intervention level for tritium of 7600 Bq l–1 ( Radiation Safety Standards-99/2009, Appendix 2a.

  8. The Role of Suomi NPP VIIRS Data in Land Science and Applications.

    Science.gov (United States)

    Justice, C. O.; Csiszar, I. A.; Roman, M. O.; Vermote, E.

    2014-12-01

    The current Suomi-NPP mission was designed as a bridging mission to the Joint Polar Satellite System (JPSS) next-generation, operational satellites. The VIIRS instrument on-board Suomi-NPP provides continuity with NASA's Earth Observing System Moderate-resolution Imaging Spectroradiometer (MODIS) observations and a much-needed replacement of the long-serving, operational NOAA Advanced Very High Resolution Radiometer (AVHRR) system, to meet the expanding needs of Earth Science and Applications of Societal Benefit. Post-launch evaluation has proven the instrument to be excellent for land observations and capable of providing measurement continuity with MODIS. This provides a critical contribution to the scientific study of global change. Several regions of the World are undergoing rapid land transformations, driven by economic development and population growth. In addition, changes in climate conditions are resulting in ecosystem responses and changes in land cover and land use. Long-term, systematic observations of the global land surface at coarse resolution enable detection, monitoring and characterization of such changes to the land surface. A suite of Land environmental data records (EDRs) from the VIIRS, are being developed by NOAA to meet operational data needs, primarily for the National Weather Service (e.g., Albedo, Land Surface Temperature, Fractional Vegetation Cover, Surface Type, Snow and Ice Monitoring). Scientists funded by NOAA and NASA, have been evaluating and validating these products. Based on these evaluations, NASA is embarking on a program to develop enhanced and additional products to provide continuity with MODIS to meet the needs of the global change science community. In addition, and as with MODIS, data from the VIIRS can be used as input to a number of practical applications of societal benefit and the associated decision support systems. For example, progress with VIIRS data is being made in the areas of fire and agricultural monitoring

  9. Development of the regulatory guide on the management of aging for the operating NPP

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Tae Myung; Lee, Jae Kyung; Byeon, Chang Soo; Kim, Hyo Soo [Chungju Univ., Cheongju (Korea, Republic of); Kim, Young Ryul; Eun, Hui Kwang [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    2000-03-15

    this is the first final report, and it includes the analysis of PSR regulation status for the operating NPP of foreign countries and thus established scope and method of Korean PSR. The detailed requirements of aging management, as one of the most important factors, is planned to be dealt in the second final report, The result of study so far can be summarized as below, The necessity and feasibility of domestic PSR application is confirmed through the investigation, comparison and review of PSR implementation and regulation status in foreign countries, And, detailed analysis of vaseline guidelines of IAEA performed to establish a skeleton of desirable safety review guideline for Korean NPP. Our own objectives, scope and strategy of review for PWR are roughly set up form factor by factor analysis of PSR implementation experience in foreign countries and background of IAEA guidelines. The essential elements of review for each PSR safety factors are classified and proposed. For efficient review of proposed safety factors and elements, three different option of framework for PSR guidelines are proposed and compared. Through analysis of strength safety factors and elements, three different options of framework for PSR guidelines are proposed and compared. Through analysis of strength and weakness of the three optional frameworks proposed for Korean PSR guideline, the third one is recommended as the best for both owner and regulator. By maintaining the current framework of SAR at maximum and, at the same time, referring the basic concept of IAEA PSR guide, the detailed contents and its review elements are chosen. The standards on the aging was proposed preliminarily for the application of aging evaluation in PSR.

  10. NPP VIIRS On-Orbit Calibration and Characterization Using the Moon

    Science.gov (United States)

    Sun, J.; Xiong, X.; Butler, J.

    2012-01-01

    The Visible Infrared Imager Radiometer Suite (VIIRS) is one of five instruments on-board the Suomi National Polar orbiting Partnership (NPP) satellite that launched from Vandenberg Air Force Base, Calif., on Oct. 28, 2011. VIIRS has been scheduled to view the Moon approximately monthly with a spacecraft roll maneuver after its NADIR door open on November 21, 2011. To reduce the uncertainty of the radiometric calibration due to the view geometry, the lunar phase angles of the scheduled lunar observations were confined in the range from -56 deg to -55 deg in the first three scheduled lunar observations and then changed to the range from -51.5 deg to -50.5 deg, where the negative sign for the phase angles indicates that the VIIRS views a waxing moon. Unlike the MODIS lunar observations, most scheduled VIIRS lunar views occur on the day side of the Earth. For the safety of the instrument, the roll angles of the scheduled VIIRS lunar observations are required to be within [-14 deg, 0 deg] and the aforementioned change of the phase angle range was aimed to further minimize the roll angle required for each lunar observation while keeping the number of months in which the moon can be viewed by the VIIRS instrument each year unchanged. The lunar observations can be used to identify if there is crosstalk in VIIRS bands and to track on-orbit changes in VIIRS Reflective Solar Bands (RSB) detector gains. In this paper, we report our results using the lunar observations to examine the on-orbit crosstalk effects among NPP VIIRS bands, to track the VIIRS RSB gain changes in first few months on-orbit, and to compare the gain changes derived from lunar and SD/SDSM calibration.

  11. A process model for simulating net primary productivity (NPP) based on the interaction of water-heat process and nitrogen: a case study in Lantsang valley

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hai-long; LIU Gao-huan; FENG Xian-feng

    2011-01-01

    Terrestrial carbon cycle and the global atmospheric CO2 budget are important foci in global climate change research. Simulating net primary productivity (NPP) of terrestrial ecosystems is important for carbon cycle research. In this study, a plant-atmosphere-soil continuum nitrogen (N) cycling model was developed and incorporated into the Boreal Ecosystem Productivity Simulator (BEPS) model. With the established database (leaf area index, land cover, daily meteorology data,vegetation and soil) at a 1 km resolution, daily maps of NPP for Lantsang valley in 2007 were produced, and the spatial-temporal patterns of NPP and mechanisms of its responses to soil N level were further explored.The total NPP and mean NPP of Lantsang valley in 2007 were 66.5 Tg C and 416 g·m-2·a-1 C, respectively. In addition, statistical analysis of NPP of different land cover types was conducted and investigated. Compared with BEPS model (without considering nitrogen effect), it was inferred that the plant carbon fixing for the upstream of Lantsang valley was also limited by soil available nitrogen besides temperature and precipitation.However, nitrogen has no evident limitation to NPP accumulation of broadleaf forest, which mainly distributed in the downstream of Lantsang valley.

  12. Thermodynamic analysis of SCW NPP cycles with thermo-chemical co-generation of hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Naidin, N.; Mokry, S.; Monichan, R.; Chophla, K.; Pioro, I. [Faculty of Energy Systems and Nuclear Science, Univ. of Ontario Inst. of Technology, Oshawa, Ontario (Canada)], E-mail: Maria.Naidin@mycampus.uoit.ca, Sarah.Mokry@mycampus.uoit.ca, Romson.Monichan@uoit.ca, Karan.Chophla@mycampus.uoit.ca, Igor.Pioro@uoit.ca; Naterer, G.; Gabriel, K. [Faculty of Engineering and Applied Science, Univ. of Ontario Inst. of Technology, Oshawa, Ontario (Canada)], E-mail: Greg.Naterer@uoit.ca, Kamiel.Gabriel@uoit.ca

    2009-07-01

    Research activities are currently conducted worldwide to develop Generation IV nuclear reactor concepts with the objective of improving thermal efficiency and increasing economic competitiveness of Generation IV Nuclear Power Plants (NPPs) compared to modern thermal power plants. The Super-Critical Water-cooled Reactor (SCWR) concept is one of the six Generation IV options chosen for further investigation and development in several countries including Canada and Russia. Water-cooled reactors operating at subcritical pressures (10 - 16 MPa) have provided a significant amount of electricity production for the past 50 years. However, the thermal efficiency of the current NPPs is not very high (30 - 35%). As such, more competitive designs, with higher thermal efficiencies, which will be close to that of modern thermal power plants (45 - 50%), need to be developed and implemented. Super-Critical Water (SCW) NPPs will have much higher operating parameters compared to current NPPs (i.e., steam pressures of about 25 MPa and steam outlet temperatures up to 625{sup o}C). Furthermore, SCWRs operating at higher temperatures can facilitate an economical co-generation of hydrogen through thermochemical cycles (particularly, the copper-chlorine cycle) or direct high-temperature electrolysis. The two SCW NPP cycles proposed by this paper are based on direct, regenerative, no-reheat and single-reheat configurations. As such, the main parameters and performance in terms of thermal efficiency of the SCW NPP concepts mentioned above are being analyzed. The cycles are generally comprised of: an SCWR, a SC turbine, one deaerator, ten feedwater heaters, and pumps. The SC turbine of the no-reheat cycle consists of one High-Pressure (HP) cylinder and two Low-Pressure (LP) cylinders. Alternatively, the SC turbine for the single-reheat cycle is comprised of one High-Pressure (HP) cylinder, one Intermediate-Pressure (IP) cylinder and two Low-Pressure (LP) cylinders. Since the single

  13. Validation of S-NPP VIIRS Day-Night band and M bands performance using ground reference targets of Libya 4 and Dome C

    Science.gov (United States)

    Chen, Xuexia; Wu, Aisheng; Xiong, Xiaoxiong; Lei, Ning; Wang, Zhipeng; Chiang, Kwofu

    2015-09-01

    This paper provides methodologies developed and implemented by the NASA VIIRS Calibration Support Team (VCST) to validate the S-NPP VIIRS Day-Night band (DNB) and M bands calibration performance. The Sensor Data Records produced by the Interface Data Processing Segment (IDPS) and NASA Land Product Evaluation and Algorithm Testing Element (PEATE) are acquired nearly nadir overpass for Libya 4 desert and Dome C snow surfaces. In the past 3.5 years, the modulated relative spectral responses (RSR) change with time and lead to 3.8% increase on the DNB sensed solar irradiance and 0.1% or less increases on the M4-M7 bands. After excluding data before April 5th, 2013, IDPS DNB radiance and reflectance data are consistent with Land PEATE data with 0.6% or less difference for Libya 4 site and 2% or less difference for Dome C site. These difference are caused by inconsistent LUTs and algorithms used in calibration. In Libya 4 site, the SCIAMACHY spectral and modulated RSR derived top of atmosphere (TOA) reflectance are compared with Land PEATE TOA reflectance and they indicate a decrease of 1.2% and 1.3%, respectively. The radiance of Land PEATE DNB are compared with the simulated radiance from aggregated M bands (M4, M5, and M7). These data trends match well with 2% or less difference for Libya 4 site and 4% or less difference for Dome C. This study demonstrate the consistent quality of DNB and M bands calibration for Land PEATE products during operational period and for IDPS products after April 5th, 2013.

  14. Validation of S-NPP VIIRS Day-Night Band and M Bands Performance Using Ground Reference Targets of Libya 4 and Dome C

    Science.gov (United States)

    Chen, Xuexia; Wu, Aisheng; Xiong, Xiaoxiong; Lei, Ning; Wang, Zhipeng; Chiang, Kwofu

    2015-01-01

    This paper provides methodologies developed and implemented by the NASA VIIRS Calibration Support Team (VCST) to validate the S-NPP VIIRS Day-Night band (DNB) and M bands calibration performance. The Sensor Data Records produced by the Interface Data Processing Segment (IDPS) and NASA Land Product Evaluation and Algorithm Testing Element (PEATE) are acquired nearly nadir overpass for Libya 4 desert and Dome C snow surfaces. In the past 3.5 years, the modulated relative spectral responses (RSR) change with time and lead to 3.8% increase on the DNB sensed solar irradiance and 0.1% or less increases on the M4-M7 bands. After excluding data before April 5th, 2013, IDPS DNB radiance and reflectance data are consistent with Land PEATE data with 0.6% or less difference for Libya 4 site and 2% or less difference for Dome C site. These difference are caused by inconsistent LUTs and algorithms used in calibration. In Libya 4 site, the SCIAMACHY spectral and modulated RSR derived top of atmosphere (TOA) reflectance are compared with Land PEATE TOA reflectance and they indicate a decrease of 1.2% and 1.3%, respectively. The radiance of Land PEATE DNB are compared with the simulated radiance from aggregated M bands (M4, M5, and M7). These data trends match well with 2% or less difference for Libya 4 site and 4% or less difference for Dome C. This study demonstrate the consistent quality of DNB and M bands calibration for Land PEATE products during operational period and for IDPS products after April 5th, 2013.

  15. IPEEE Review of other external events of the NPP Asco; Revision del IPEEE de sucesos externos de C.N. Asco

    Energy Technology Data Exchange (ETDEWEB)

    Canadell, F.; Aleman, A.; Beltran, F.; Pifarre, D.; Hernandez, H.; Gasca, C.

    2011-07-01

    Within the process of maintaining and updating the risk analysis of the NPP Asco, results from the review of the vulnerability study of the plant against severe accidents caused by external success (Individual Plant Examination of External Events, IPEEE).

  16. Net primary productivity (NPP) and associated parameters for the U.S. outer continental shelf waters, 1998-2009 (NODC Accession 0071184)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This accession consists of monthly net primary productivity (NPP) estimates for 1998-2009 derived from the Vertically Generalized Production Model (VGPM) for the 26...

  17. S-NPP CrIS Full Resolution Sensor Data Record Processing and Evaluations

    Science.gov (United States)

    Chen, Y.; Han, Y.; Wang, L.; Tremblay, D. A.; Jin, X.; Weng, F.

    2014-12-01

    The Cross-track Infrared Sounder (CrIS) on Suomi National Polar-orbiting Partnership Satellite (S-NPP) is a Fourier transform spectrometer. It provides a total of 1305 channels in the normal mode for sounding the atmosphere. CrIS can also be operated in the full spectral resolution (FSR) mode, in which the MWIR and SWIR band interferograms are recorded with the same maximum path difference as the LWIR band and with spectral resolution of 0.625 cm-1 for all three bands (total 2211 channels). NOAA will operate CrIS in FSR mode in December 2014 and the Joint Polar Satellite System (JPSS). Up to date, the FSR mode has been commanded three times in-orbit (02/23/2012, 03/12/2013, and 08/27/2013). Based on CrIS Algorithm Development Library (ADL), CrIS full resolution Processing System (CRPS) has developed to generate the FSR Sensor Data Record (SDR). This code can also be run for normal mode and truncation mode SDRs with recompiling. Different calibration approaches are implemented in the code in order to study the ringing effect observed in CrIS normal mode SDR and to support to select the best calibration algorithm for J1. We develop the CrIS FSR SDR Validation System to quantify the CrIS radiometric and spectral accuracy, since they are crucial for improving its data assimilation in the numerical weather prediction, and for retrieving atmospheric trace gases. In this study, CrIS full resolution SDRs are generated from CRPS using the data collected from FSR mode of S-NPP, and the radiometric and spectral accuracy are assessed by using the Community Radiative Transfer Model (CRTM) and European Centre for Medium-Range Weather Forecasts (ECMWF) forecast fields. The biases between observation and simulations are evaluated to estimate the FOV-2-FOV variability and bias under clear sky over ocean. Double difference method and Simultaneous Nadir Overpass (SNO) method are also used to assess the CrIS radiance consistency with well-validated IASI. Two basic frequency validation

  18. Evaluation of NPP VIIRS Vegetation Index EDR performance using MODIS and AVHRR data records

    Science.gov (United States)

    vargas, M.; Shabanov, N.; Miura, T.

    2012-12-01

    Vegetation Index (VI) is one key parameter to specify the boundary condition in global climate models, weather forecasting models and numerous remote sensing applications for monitoring environmental state and its change. The VI Environmental Data Record (EDR), which includes the Top of Atmosphere Normalized Difference Vegetation Index (TOA NDVI) and the Top of Canopy Enhanced Vegetation Index (TOC EVI), is currently operationally generated from data delivered by the Visible Infrared Imaging radiometer Suite (VIIRS) instrument onboard the National Polar-orbiting Partnership (NPP) platform launched in October 2011. The VI EDR was implemented to provide continuity for 30+ years of historical VI records provided by MODIS and AVHRR sensors. This presentation reports on the results of the analysis performed by the JPSS VI group at NOAA-NESDIS-STAR on two major aspects of performance of the VI EDR in the early phase of the NPP mission: (1) assessment of accuracy of the VIIRS VI EDR product with respect to input data including Surface Reflectances, Cloud and Aerosol masks as function of vegetation (biome) types; (2) temporal and spatial consistency of VIIRS VI EDR with respect to heritage MODIS and AVHRR VI products. This analysis is based on data from VIIRS (daily TOA NDVI and TOC EVI, and daily surface reflectances), Terra MODIS (16 days composites of TOC EVI and TOC NDVI, and daily TOA radiances) and NOAA-18 AVHRR (7-days composites of TOA NDVI). MODIS 8-biome landcover mask was used to quantify variations in VI product performance as function of vegetation type. Best overall agreement is achieved between VIIRS and MODIS data (TOC EVI and TOC NDVI) in terms of minimum systematic discrepancy (minimum bias and STD) and highest correlation of spatial patterns (highest r^2). The agreement is highest for biomes with low vegetation cover, but degrades with increased foliage density. VIIRS cloud mask provides a fair screening of daily data over the globe. While performance of

  19. Calculation of an accident with delayed scram at NPP Greifswald using the coupled code DYN3D/ATHLET

    Energy Technology Data Exchange (ETDEWEB)

    Kliem, S.

    1998-10-01

    Complex computer codes modeling the whole reactor system including 3D neutron kinetics in combination with advanced thermohydraulic plant models become more and more important for the safety assessment of nuclear reactors. Transients or experiments with both neutron kinetic and thermalhydraulic data are needed for the validation of such coupled codes like DYN3D/ATHLET. First of all measured results from nuclear power plant (NPP) transients should be used, because the experimental thermalhydraulic facilities do not offer the possibility to model space-dependent neutron kinetic effects and research reactors with reliably measured 3D neutron kinetic data do not allow to study thermalhydraulic feedback effects. In this paper, an accident with delayed scram which occurred in 1989 at the NPP Greifswald is analyzed. Calculations of this accident were carried out with the goal to validate the coupled code DYN3D/ATHLET. (orig.)

  20. KAERI software verification and validation guideline for developing safety-critical software in digital I and C system of NPP

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jang Yeol; Lee, Jang Soo; Eom, Heung Seop

    1997-07-01

    This technical report is to present V and V guideline development methodology for safety-critical software in NPP safety system. Therefore it is to present V and V guideline of planning phase for the NPP safety system in addition to critical safety items, for example, independence philosophy, software safety analysis concept, commercial off the shelf (COTS) software evaluation criteria, inter-relationships between other safety assurance organizations, including the concepts of existing industrial standard, IEEE Std-1012, IEEE Std-1059. This technical report includes scope of V and V guideline, guideline framework as part of acceptance criteria, V and V activities and task entrance as part of V and V activity and exit criteria, review and audit, testing and QA records of V and V material and configuration management, software verification and validation plan production etc., and safety-critical software V and V methodology. (author). 11 refs.

  1. Simulated dynamics of net primary productivity (NPP) for outdoor livestock feeding coefficients driven by climate change scenarios in México

    OpenAIRE

    A. I. MONTERROSO RIVAS; J. D. GÓMEZ DÍAZ; M. L. TOLEDO MEDRANO; J. A. TINOCO RUEDA; C. CONDE ÁLVAREZ; C. GAY GARCÍA

    2011-01-01

    In this paper the concept of Net Primary Productivity (NPP) is used as a way to estimate the capacity of the ecosystem to produce dry matter which may be available for livestock to meet the forage requirements. The method allows the simulation of the possible impact on NPP and dry matter (DM), under climate change conditions observable for the country in a given time horizon. The concept was also used for current coefficients of rangeland and under current climate change scenarios, thus allow...

  2. NPP changes of Larix chinensis estimated by tree-ring data and its response to climate change in the northern and southern slopes of Mt. Taibai, central China

    Science.gov (United States)

    Fang, O.; Xuemei, S.

    2015-12-01

    Larix chinensis is mainly distributed in timberline of Mt. Taibai in the Qinling Mountains, a critical geographic demarcation for climate and vegetation distribution in China. Combined with biomass equations and the annual diameter at breast height calculated from tree-ring widths and investigation data of sampling plots, annual biomass and net primary productivity (NPP) of L. chinensis in northern and southern slopes were estimated. Correlation and response analyses were used to illustrate the relationship between the climate and NPP. The results show that from 1949 to 2014, the biomass of L. chinensis in the pure forests increases from 54.03 to 94.43 t/ha in the northern slope and 28.32 to 55.80 t/ha in the southern slope. The NPP of L. chinensis in northern and southern slopes has varied concordantly over the past 65 years, with an average value of 0.62 and 0.42 t/(ha·a) respectively. The difference in NPPs between the northern and southern slope is decreasing for the slight decrease trend of NPP in northern slope. Temperature plays an important role in the growth of L. chinensis. Low temperature before the growing seasons (from pervious November to April) and warm conditions in the growing seasons (mainly from June to July) can increase the growth of L. chinensis. However, the relationships between NPP and temperature are different in the northern and southern slope. The NPP in southern slope is more positively correlated with the temperature in the growing seasons and there is no significant correlation relationship between the NPP and the temperature in previous winter (from pervious November to January), while the NPP in northern slope is more negatively correlated with the temperature before the growing seasons. These results will provide useful information for the future research of forest carbon cycling.

  3. TRANSBOUNDARY IMPACT OF THE CHERNAVODSKA NPP ON TRITIUM POLLUTION OF THE DANUBE RIVER ON THE TERRITORY OF UKRAINE

    Directory of Open Access Journals (Sweden)

    V. I. VIT`KO

    2015-10-01

    Full Text Available This article reviews the influence of the Chernavodska nuclear power plant on the aquatic environment of the Danube River in the transboundary context. Data of tritium discharges, dependence of volume activity of tritium in the Danube River, and its inflows from the surrounding areas to its mouth. The average annual volume activities of tritium are provided. Assessments of the impact of the Chernavodska NPP in conditions that are different from the norm have been given.

  4. RADIATION SITUATION STATUS OF THE TERRITORY OF OREL REGION, AFFECTED BY THE RADIOACTIVE CONTAMINATION DUE TO CHERNOBYL NPP ACCIDENT

    Directory of Open Access Journals (Sweden)

    G. L. Zakharchenko

    2009-01-01

    Full Text Available The article contains analysis of activities of Centers of State Sanitary and Epidemiological Inspection in Orel region during the first days after the Chernobyl NPP accident and consecutive years. The results of multi-year radiation and hygienic monitoring on the territory of Orel region are presented; efficiency of various measures of exposure dose reduction for the population of Orel region is analyzed.

  5. Accessing the impacts of bamboo expansion on NPP and N cycling in evergreen broadleaved forest in subtropical China

    Science.gov (United States)

    Song, Qing-ni; Lu, Hui; Liu, Jun; Yang, Jun; Yang, Guang-yao; Yang, Qing-pei

    2017-01-01

    Bamboo (Phyllostachys pubescens) expansion into adjacent forests is a widespread phenomenon in subtropical regions, and it has greatly changed the dominance hierarchy from trees to bamboos. This process may be accompanied by changes in productivity, nutrients accumulation and biogeochemical cycles. We compared the net primary production (NPP) and major pools and fluxes of nitrogen (N) in bamboo-dominant forest (BDF) and neighboring secondary evergreen broadleaved forest (EBF) in South China using the space-for-time substitution method. We found that the mean NPP of the BDF was 30.0 t ha−1 yr−1, which was 51.5% greater than that of the EBF (19.8 t ha−1 yr−1). The plant N pool for the BDF was 37.5% larger than that of the EBF, whereas the soil inorganic N pool significantly decreased by 31.2% with conversion of the EBF to BDF. Additionally, the ratio of N return to N uptake was 0.69 in the BDF and 0.88 in the EBF because of the lower litter N return of the BDF compared with that of the EBF. These results indicated that the expansion of P. pubescens significantly increased the NPP and plant N accumulation but reduced the soil N available pool and slowed the N cycling rate, which could lead to soil degradation. PMID:28067336

  6. Accessing the impacts of bamboo expansion on NPP and N cycling in evergreen broadleaved forest in subtropical China

    Science.gov (United States)

    Song, Qing-Ni; Lu, Hui; Liu, Jun; Yang, Jun; Yang, Guang-Yao; Yang, Qing-Pei

    2017-01-01

    Bamboo (Phyllostachys pubescens) expansion into adjacent forests is a widespread phenomenon in subtropical regions, and it has greatly changed the dominance hierarchy from trees to bamboos. This process may be accompanied by changes in productivity, nutrients accumulation and biogeochemical cycles. We compared the net primary production (NPP) and major pools and fluxes of nitrogen (N) in bamboo-dominant forest (BDF) and neighboring secondary evergreen broadleaved forest (EBF) in South China using the space-for-time substitution method. We found that the mean NPP of the BDF was 30.0 t ha‑1 yr‑1, which was 51.5% greater than that of the EBF (19.8 t ha‑1 yr‑1). The plant N pool for the BDF was 37.5% larger than that of the EBF, whereas the soil inorganic N pool significantly decreased by 31.2% with conversion of the EBF to BDF. Additionally, the ratio of N return to N uptake was 0.69 in the BDF and 0.88 in the EBF because of the lower litter N return of the BDF compared with that of the EBF. These results indicated that the expansion of P. pubescens significantly increased the NPP and plant N accumulation but reduced the soil N available pool and slowed the N cycling rate, which could lead to soil degradation.

  7. The development of robotic system for inspecting and repairing NPP primary coolant system of high-level radioactive environment

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seung Ho; Kim, Ki Ho; Jung, Seung Ho; Kim, Byung Soo; Hwang, Suk Yeoung; Kim, Chang Hoi; Seo, Yong Chil; Lee, Young Kwang; Lee, Yong Bum; Cho, Jai Wan; Lee, Jae Kyung; Lee, Yong Deok

    1997-07-01

    This project aims at developing a robotic system to automatically handle inspection and maintenance of NPP safety-related facilities in high-level radioactive environment. This robotic system under development comprises two robots depending on application fields - a mobile robot and multi-functional robot. The mobile robot is designed to be used in the area of primary coolant system during the operation of NPP. This robot enables to overcome obstacles and perform specified tasks in unstructured environment. The multi-functional robot is designed for performing inspection and maintenance tasks of steam generator and nuclear reactor vessel during the overhaul periods of NPP. Nuclear facilities can be inspected and repaired all the time by use of both the mobile robot and the multi-functional robot. Human operator, by teleoperation, monitors the movements of such robots located at remote task environment via video cameras and controls those remotely generating desired commands via master manipulator. We summarize the technology relating to the application of the mobile robot to primary coolant system environment, the applicability of the mobile robot through 3D graphic simulation, the design of the mobile robot, the design of its radiation-hardened controller. We also describe the mechanical design, modeling, and control system of the multi-functional robot. Finally, we present the design of the force-reflecting master and the modeling of virtual task environment for a training simulator. (author). 47 refs., 16 tabs., 43 figs.

  8. Integrity Analysis of Turbine Building for the MSLB Using GOTHIC code for Wolsong NPP Unit 2

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Bong-Jin; Jin, Dong-Sik; Kim, Jong-Hyun; Han, Sang-Koo [ACT, Daejeon (Korea, Republic of); Choi, Hoon; Kho, Dong-Wook [KHNP-CRI, Daejeon (Korea, Republic of)

    2015-05-15

    A break in the piping between the steam generators and the turbine can lead to rapid loss of secondary circuit inventory. A break inside the turbine building leads to pressure differentials between different areas of the turbine building. In order to improve the environmental protection of various components within the turbine building, a wall has been erected which effectively separates the area in which these components are housed from the rest of the turbine building. Relief panels installed in the turbine building ensure that the pressure differential across the wall would be less than that required to jeopardize the wall integrity. The turbine building service wing is excluded from the scope of this analysis. It is further assumed that any doors in the heavy wall are as strong as the wall itself, with no gaps or leakage around the doors. For the full scope safety analysis of turbine building for Wolsong NPP unit 2, input decks for the various objectives, which can be read by GOTHIC 7.2a, are developed and tested for the steady state simulation. The input data files provide simplified representations of the geometric layout of the turbine building (volumes, dimensions, flow paths, doors, panels, etc.) and the performance characteristics of the various turbine building subsystems.

  9. A study on the Predictive Maintenance in NPP by Thermography diagnosis test

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, Gwangyeol; Lee, Goungjin [Chosun Univ., Kwangju (Korea, Republic of)

    2013-05-15

    The data are obtained, analyzed, trended, and used to predict equipment failures. When equipment failure timing is known, then actions can be taken to prevent or delay failure. This allows equipment reliability to remain high. Thermal measurement technology measures the absolute or relative temperatures of key equipment parts or areas being monitored. Abnormal temperatures indicate developing problems. Temperature and thermal behaviour of plant components are the most critical factors in the maintenance of plant equipment. For this reason, temperature is frequently considered the key to successful plant maintenance and is the frequently measured quantity. There are two types of equipment used in this technology: contact and non-contact. Contact methods of temperature measurement, using thermometers and thermocouples, are still commonly used for many applications. However, non-contact measurement using infrared sensors has become an increasingly desirable alternative to conventional methods. Maintenance is conducted every six months to two years on all the 428(in Young Gwang NPP 1, 2) plant thermography diagnosis equipment to be inspected including pumps, fans, transformers. Through the thermography measurement, there was a abnormal temperature detected recently on the transformers and pumps which was promptly responded to before showing any signs of malfunction, contributing to improving reliability of the facility. In case of the high-voltage switchgear, for the safety of the thermography inspector, additional safety precautions should be taken by installing the thermography measurement inspection window on the transformer's panel door.

  10. A Conceptual Framework of Human Reliability Analysis for Execution Human Error in NPP Advanced MCRs

    Energy Technology Data Exchange (ETDEWEB)

    Jang, In Seok; Kim, Ar Ryum; Seong, Poong Hyun [KAIST, Daejeon (Korea, Republic of); Jung, Won Dea [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-08-15

    The operation environment of Main Control Rooms (MCRs) in Nuclear Power Plants (NPPs) has changed with the adoption of new human-system interfaces that are based on computer-based technologies. The MCRs that include these digital and computer technologies, such as large display panels, computerized procedures, and soft controls, are called Advanced MCRs. Among the many features of Advanced MCRs, soft controls are a particularly important feature because the operation action in NPP Advanced MCRs is performed by soft control. Using soft controls such as mouse control, and touch screens, operators can select a specific screen, then choose the controller, and finally manipulate the given devices. Due to the different interfaces between soft control and hardwired conventional type control, different human error probabilities and a new Human Reliability Analysis (HRA) framework should be considered in the HRA for advanced MCRs. In other words, new human error modes should be considered for interface management tasks such as navigation tasks, and icon (device) selection tasks in monitors and a new framework of HRA method taking these newly generated human error modes into account should be considered. In this paper, a conceptual framework for a HRA method for the evaluation of soft control execution human error in advanced MCRs is suggested by analyzing soft control tasks.

  11. Length Effect on the Thermal Performance of a Heat Pipe for NPP Decay Heat Removal

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Joseph; Lee, Jae Young [Handong Global University, Pohang (Korea, Republic of)

    2015-10-15

    After Fukushima accident, importance and necessity of passive safety for nuclear power plant have been emphasized. Due to its passive characteristic, heat pipe is seriously considered as an alternative device of the active safety system for removing decay heat from the reactor core. Among many possible applications of heat pipe in NPP, we considered the application to the control rod. In the situation of SBO(Station Black Out) due to BDBA(Beyond Design Basis Accident) in a PWR, control rods are dropped in to nuclear reactor core automatically. Thus, it is expected that applying heat pipe function to control rod can enhance reactor safety by removing decay heat of fuel assembly. Considering the height of the control rod, L/D of the heat pipe would be larger than 400 if the given diameter is assumed to be similar to the diameter of the control rod. Thus, it may not be the matter for small heat pipes, it is necessary to consider the effects of L/D for the large L/D heat pipes. There for, length effect on the thermal performance of heat pipe for decay heat removal was experimentally investigated in this study. Through this study, the L/D effect on the thermal performance of the large L/D heat pipe for nuclear reactor has been studied.

  12. Systems engineering approach for the reuse of metallic waste from NPP decommissioning and dose evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Hyung Woo; Kim, Chang Lak [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2017-03-15

    The oldest commercial reactor in South Korea, Kori-1 Nuclear Power Plant (NPP), will be shut down in 2017. Proper treatment for decommissioning wastes is one of the key factors to decommission a plant successfully. Particularly important is the recycling of clearance level or very low level radioactively contaminated metallic wastes, which contributes to waste minimization and the reduction of disposal volume. The aim of this study is to introduce a conceptual design of a recycle system and to evaluate the doses incurred through defined work flows. The various architecture diagrams were organized to define operational procedures and tasks. Potential exposure scenarios were selected in accordance with the recycle system, and the doses were evaluated with the RESRAD-RECYCLE computer code. By using this tool, the important scenarios and radionuclides as well as impacts of radionuclide characteristics and partitioning factors are analyzed. Moreover, dose analysis can be used to provide information on the necessary decontamination, radiation protection process, and allowable concentration limits for exposure scenarios.

  13. Development of Highly Survivable Power and Communication System for NPP Instruments under Severe Accident

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Seung J.; Gu, Beom W.; Nguyen, Duy T.; Choi, Bo H.; Rim, Chun T. [KAIST, Daejeon (Korea, Republic of); Lee, So I. [KHNP CRI, Daejeon (Korea, Republic of)

    2014-10-15

    According to the detail report from the Fukushima nuclear accident, the failure of conventional instruments is mainly due to the following reasons. 1) Insufficient backup battery capacity after the station black out (SBO) 2) The malfunction or damage of instruments due to the extremely harsh ambient condition after the severe accident 3) The cut-off of power and communication cable due to the physical shocks of hydrogen explosion after the severe accident Since the current equipment qualification (EQ) for the NPP instruments is based on the design basis accident such as loss of coolant accident (LOCA), conventional instruments, which are examined under EQ condition, cannot guarantee their normal operation during the severe accident. A 7m-long-distance wireless power transfer and a radio frequency (RF) communication were introduced with conventional wired system to increase a redundancy. A heat isolation box and a harness are adopted to provide a protection from the expected physical shocks such as missiles and drastic increase of ambient temperature and pressure. A detail design principle of the highly survivable power and communication system, which has 4 sub-systems of a DCRS wireless power transfer, a Zigbee wireless communication, a GFRP harness, and a passive type router with a fly back regulator, has been presented in this paper. Each sub-system has been designed to have a robust operation characteristic regardless of the estimated physical shocks after the severe accident.

  14. Westinghouse Fuel Assemblies Performance after Operation in South-Ukraine NPP Mixed Core

    Energy Technology Data Exchange (ETDEWEB)

    Abdullayev, A. M.; Kulish, G. V.; Slyeptsov, O.; Slyeptsov, S.; Aleshin, Y.; Sparrow, S.; Lashevych, P.; Sokolov, D.; Latorre, Richard

    2013-09-14

    The evaluation of WWER-1000 Westinghouse fuel performance was done using the results of post–irradiation examinations of six LTAs and the WFA reload batches that have operated normally in mixed cores at South-Ukraine NPP, Unit-3 and Unit-2. The data on WFA/LTA elongation, FR growth and bow, WFA bow and twist, RCCA drag force and drag work, RCCA drop time, FR cladding integrity as well as the visual observation of fuel assemblies obtained during the 2006-2012 outages was utilized. The analysis of the measured data showed that assembly growth, FR bow, irradiation growth, and Zr-1%Nb grid and ZIRLO cladding corrosion lies within the design limits. The RCCA drop time measured for the LTA/WFA is about 1.9 s at BOC and practically does not change at EOC. The measured WFA bow and twist, and data of drag work on RCCA insertion showed that the WFA deformation in the mixed core is mostly controlled by the distortion of Russian FAs (TVSA) having the higher lateral stiffness. The visual inspection of WFAs carried out during the 2012 outages revealed some damage to the Zr-1%Nb grid outer strap for some WFAs during the loading sequence. The performed fundamental investigations allowed identifying the root cause of grid outer strap deformation and proposing the WFA design modifications for preventing damage to SG at a 225 kg handling trip limit.

  15. Analysis of Suomi-NPP VIIRS vignetting functions based on yaw maneuver data

    Science.gov (United States)

    McIntire, Jeff; Efremova, Boryana; Moyer, David; Lee, Shihyan; Xiong, Xiaoxiong

    2012-09-01

    The Suomi - NPP Visible Infrared Imager Radiometer Suite (VIIRS) reflective bands are calibrated on-orbit via reference to regular solar observations through a solar attenuation screen (SAS) and diffusely reflected off a Spectralon ® panel. The degradation of the Spectralon panel BRDF due to UV exposure is tracked via a ratioing radiometer (SDSM) which compares near simultaneous observations of the panel with direct observations of the sun (through a separate attenuation screen). On-orbit, the vignetting functions of both attenuation screens are most easily measured when the satellite performs a series of yaw maneuvers over a short period of time (thereby covering the yearly angular variation of solar observations in a couple of days). Because the SAS is fixed, only the product of the screen transmission and the panel BRDF was measured. Moreover, this product was measured by both VIIRS detectors as well as the SDSM detectors (albeit at different reflectance angles off the Spectralon panel). The SDSM screen is also fixed; in this case, the screen transmission was measured directly. Corrections for instrument drift and degradation, solar geometry, and spectral effects were taken into consideration. The resulting vignetting functions were then compared to the pre-launch measurements as well as models based on screen geometry.

  16. Experience in adjusting of the level regulation system of steam generators of the Rovno NPP

    Energy Technology Data Exchange (ETDEWEB)

    Patselyuk, S.N.; Sokolov, A.G.; Kazakov, V.I.; Dorosh, Yu.A.

    1984-07-01

    A system of feed water level control in steam generators at the Rovno NPP with WWER-440 reactors which comprises start-up as well as main regulators is described. The start-up regulator (single-pulsed with a signal by the level) keeps the level in the steam generator at loadings up to 30% of the nominal reactor power Nsub(nom.). The main regulator is connected in the three-pulsed circuit and it receives signals by steam and water flow rate and by the level in the steam generator. The main regulator has been started only at loadings above 40% Nsub(nom.). After reconstruction it was used in the 15-100% Nsub(nom.) range. Characteristics of the level control system in the steam generator at perturbations intoduced by the main circulating pump (MCP) and turbine disconnection as well as change in feed water flow rate have been studied. The studies have revealed that the system ensures necessary quality of control in stationary modes. The system operates stably at perturbations of feed water flow rate up to 50% Nsub(nom.). Perturbations by MCP connections and disconnections is most difficult for control system.

  17. MORE. Management of Requirements in NPP modernisation projects - Project report 2005

    Energy Technology Data Exchange (ETDEWEB)

    Thunem, A.P.J.; Fredriksen, R.; Thunem, H.P.J. [IFE (Norway); Ventae, O.; Valkonen, J.; Holmberg, J.E. [VTT Technical Research Centre of Finland (Finland)

    2006-04-15

    The overall objective of the project MORE is to improve the means for managing the large amounts of evolving requirements in Nordic NPP modernisation projects. In accordance to this objective, the activity will facilitate the industrial utilisation of the research results from the project TACO. On the basis of experiences in the Nordic countries, the overall aim of the TACO project has been to identify the best practices and most important criteria for ensuring effective communication in relation to requirements elicitation and analysis, understandability of requirements to all parties, and traceability of requirements. The project resulted in the development of a traceability model for handling requirements from their origins and through their final shapes. Particular emphasis for the MORE project in 2005 was put on utilising a prototype of a tool (TRACE) intended to support an adopted approach to dependable requirements engineering, suitable for modelling and handling large amounts of requirements related to all stages of the systems development process and not only those traditionally including requirements at high-level stages. (au)

  18. Cloud-based Web Services for Near-Real-Time Web access to NPP Satellite Imagery and other Data

    Science.gov (United States)

    Evans, J. D.; Valente, E. G.

    2010-12-01

    We are building a scalable, cloud computing-based infrastructure for Web access to near-real-time data products synthesized from the U.S. National Polar-Orbiting Environmental Satellite System (NPOESS) Preparatory Project (NPP) and other geospatial and meteorological data. Given recent and ongoing changes in the the NPP and NPOESS programs (now Joint Polar Satellite System), the need for timely delivery of NPP data is urgent. We propose an alternative to a traditional, centralized ground segment, using distributed Direct Broadcast facilities linked to industry-standard Web services by a streamlined processing chain running in a scalable cloud computing environment. Our processing chain, currently implemented on Amazon.com's Elastic Compute Cloud (EC2), retrieves raw data from NASA's Moderate Resolution Imaging Spectroradiometer (MODIS) and synthesizes data products such as Sea-Surface Temperature, Vegetation Indices, etc. The cloud computing approach lets us grow and shrink computing resources to meet large and rapid fluctuations (twice daily) in both end-user demand and data availability from polar-orbiting sensors. Early prototypes have delivered various data products to end-users with latencies between 6 and 32 minutes. We have begun to replicate machine instances in the cloud, so as to reduce latency and maintain near-real time data access regardless of increased data input rates or user demand -- all at quite moderate monthly costs. Our service-based approach (in which users invoke software processes on a Web-accessible server) facilitates access into datasets of arbitrary size and resolution, and allows users to request and receive tailored and composite (e.g., false-color multiband) products on demand. To facilitate broad impact and adoption of our technology, we have emphasized open, industry-standard software interfaces and open source software. Through our work, we envision the widespread establishment of similar, derived, or interoperable systems for

  19. Bioindication of the anthropogenic effects on micropopulations of Pinus sylvestris, L. in the vicinity of a plant for the storage and processing of radioactive waste and in the Chernobyl NPP zone.

    Science.gov (United States)

    Geraskin, S A; Zimina, L M; Dikarev, V G; Dikareva, N S; Zimin, V L; Vasiliyev, D V; Oudalova, A A; Blinova, L D; Alexakhin, R M

    2003-01-01

    Results of a comparative analysis of the frequency and spectrum of cytogenetic anomalies are presented for reproductive (seeds) and vegetative (needles) samples taken from Scotch pine (Pinus sylvestris, L.) micropopulations growing at sites with differing levels of radioactive contamination in the Chernobyl NPP 30 km zone, and at the location of a facility for the processing and storage of radioactive wastes (the 'Radon' LWPE, near the town of Sosnovy Bor in the Leningrad Region). The data obtained indicate the presence of genotoxic contaminants in the environment of the tree micropopulations. Chemical toxins make the main contribution to the environmental contamination in the Sosnovy Bor area as compared with the influence of ionising radiation in the Chernobyl 30 km zone. The higher radioresistance of seeds of Scotch pine growing on the area of the 'Radon' LWPE and in the centre of Sosnovy Bor town was revealed with acute gamma-radiation.

  20. Bioindication of the anthropogenic effects on micropopulations of Pinus sylvestris, L. in the vicinity of a plant for the storage and processing of radioactive waste and in the Chernobyl NPP zone

    Energy Technology Data Exchange (ETDEWEB)

    Geraskin, S.A. E-mail: riar@obninsk.org; Zimina, L.M.; Dikarev, V.G.; Dikareva, N.S.; Zimin, V.L.; Vasiliyev, D.V.; Oudalova, A.A.; Blinova, L.D.; Alexakhin, R.M

    2003-07-01

    Results of a comparative analysis of the frequency and spectrum of cytogenetic anomalies are presented for reproductive (seeds) and vegetative (needles) samples taken from Scotch pine (Pinus sylvestris, L.) micropopulations growing at sites with differing levels of radioactive contamination in the Chernobyl NPP 30 km zone, and at the location of a facility for the processing and storage of radioactive wastes (the 'Radon LWPE, near the town of Sosnovy Bor in the Leningrad Region). The data obtained indicate the presence of genotoxic contaminants in the environment of the tree micropopulations. Chemical toxins make the main contribution to the environmental contamination in the Sosnovy Bor area as compared with the influence of ionising radiation in the Chernobyl 30 km zone. The higher radioresistance of seeds of Scotch pine growing on the area of the 'Radon' LWPE and in the centre of Sosnovy Bor town was revealed with acute {gamma}-radiation.

  1. Fracture toughness of welded joints materials for main pipelines at Ignalina NPP

    Energy Technology Data Exchange (ETDEWEB)

    Daunys, Mykolas [Kaunas University of Technology, 27 Kestucio, LT-44025 Kaunas (Lithuania)]. E-mail: mykolas.daunys@ktu.lt; Krasauskas, Povilas [Kaunas University of Technology, 27 Kestucio, LT-44025 Kaunas (Lithuania); Dundulis, Romualdas [Kaunas University of Technology, 27 Kestucio, LT-44025 Kaunas (Lithuania)

    2005-03-01

    This paper deals with an investigation of mechanical and fracture toughness characteristics of welded joint materials used in Ignalina Nuclear Power Plant (NPP) reactor main circulating circuit (MCC) and steam pipelines. Basic metal of MCC group distributing header (GDH) steel 08Ch18N10T (Du-300), its weld metal welded by manual and automatic arc method using the wire SV-04Ch19N11M3 and electrodes EA-100/10U or EA-100/10T, this joint heat-affected zone metal and base metal of the main steam system-steel 16GS (DU-630) and its weld metal welded by manual arc method using the wire SV-08GS2 and electrodes UONI-13/55 were tested. Mechanical properties of welded joints materials-proportional limit ({sigma}{sub pl}), yield ({sigma}{sub y}) and ultimate ({sigma}{sub u}) strength, fracture stress ({sigma}{sub f}) and ductility (Z) (percent reduction of area) of the specimens were determined. Investigation of relative critical stress intensity factor for fixed thickness of the specimen K{sub C}* and critical J-integral, J{sub IC}, was performed. The probabilistic investigation of influence of the mechanical properties ({sigma}{sub pl}, {sigma}{sub y}, {sigma}{sub u}) onto fracture toughness characteristics K{sub C}* and J{sub IC} for tested materials by using linear regression model with three independent variables was performed. Research enabled to conclude that proposed multivariable regression model with 80% probability (confidence coefficient {alpha}=0.05) has explained reasonably well the dependence of K{sub C}* with {sigma}{sub pl}, {sigma}{sub y}, {sigma}{sub u} and it has shown the non-acceptability of probabilistic evaluation of the model with respect to J{sub IC}.

  2. Development of a light weighted mobile robot for SG tube inspection in NPP

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Yong Chil; Jeong, Kyung Min; Shin, Hochul; Gweng, Jung Ju; Lee, Sung Uk; Jeong, Seung Ho; Choi, Young Soo; Kim, Seung Ho [KAERI, Daejeon (Korea, Republic of); Shin, Chun Sup; Park, Ki Tae [Korea Plant Service and Engineering, Busan (Korea, Republic of)

    2012-10-15

    Steam generators (SG) are among the most critical components of pressurized water Nuclear Power Plants (NPP). SG tubes must provide a reliable pressure boundary between the primary and secondary cooling water, because any leakage from tube defects could result in the release of radioactivity to the environment. Thus degradations of steam generators tubes should be monitored and inspected periodically under nuclear regulation. In service inspections of SG tubes are carried out using eddy current test (ECT) and the defected tubes are usually plugged. Because the radioactivity in the internal SG chambers limits free access of human workers, remote manipulators are required. In South Korea, Manipulators such as the Zet ec SM series and the Westinghouse ROSA series have bee used. Such manipulators are rigidly mounted to man ways or tube sheets of SG. Confusions of the inspected tubes may occur from deflection of the manipulators. To reduce the deflections of the manipulators for covering the large working areas of tube sheets, sufficient rigidity is required and that leads to an increase of the weight. Such weight increase results in some difficulties for handling and more radiation exposure of human workers. Recently light weighed mobile robots have been introduced by Westinghouse and Zet ec. The robots can move keeping in contact with the tube sheets using devices which are commonly called cam locks. They are easier to handle and provide no confusion for the position of the inspected tubes. But when the clamping forces are loosed accidentally, they can be fall down and light repair works can be performed. This paper provides the design results for a lightweight mobile robot which is being developed in cooperation of our institutes.

  3. Validation of the Suomi NPP VIIRS Ice Surface Temperature Environmental Data Record

    Directory of Open Access Journals (Sweden)

    Yinghui Liu

    2015-12-01

    Full Text Available Continuous monitoring of the surface temperature is critical to understanding and forecasting Arctic climate change; as surface temperature integrates changes in the surface energy budget. The sea-ice surface temperature (IST has been measured with optical and thermal infrared sensors for many years. With the IST Environmental Data Record (EDR available from the Visible Infrared Imaging Radiometer Suite (VIIRS onboard the Suomi National Polar-orbiting Partnership (NPP and future Joint Polar Satellite System (JPSS satellites; we can continue to monitor and investigate Arctic climate change. This work examines the quality of the VIIRS IST EDR. Validation is performed through comparisons with multiple datasets; including NASA IceBridge measurements; air temperature from Arctic drifting ice buoys; Moderate Resolution Imaging Spectroradiometer (MODIS IST; MODIS IST simultaneous nadir overpass (SNO; and surface air temperature from the National Centers for Environmental Prediction/National Center for Atmospheric Research (NCEP/NCAR reanalysis. Results show biases of −0.34; −0.12; 0.16; −3.20; and −3.41 K compared to an aircraft-mounted downward-looking pyrometer; MODIS; MODIS SNO; drifting buoy; and NCEP/NCAR reanalysis; respectively; root-mean-square errors of 0.98; 1.02; 0.95; 4.89; and 6.94 K; and root-mean-square errors with the bias removed of 0.92; 1.01; 0.94; 3.70; and 6.04 K. Based on the IceBridge and MODIS results; the VIIRS IST uncertainty (RMSE meets or exceeds the JPSS system requirement of 1.0 K. The product can therefore be considered useful for meteorological and climatological applications.

  4. IMPROVED MODELS AND METHOD OF POWER CHANGE OF NPP UNIT WITH VVER-1000

    Directory of Open Access Journals (Sweden)

    Tymur Foshch

    2017-05-01

    Full Text Available This study represents the improved mathematical and imitational allocated in space multi-zone model of VVER-1000 which differs from the known one. It allows to take into account the energy release of 235U nuclei fission as well as 239Pu . Moreover, this model includes sub-models of simultaneous control impact of the boric acid concentration in the coolant of the first circuit and the position of 9th group control rods which allows to consider it as the model with allocated parameters and also allows to monitor changes in the mentioned technological parameters by reactor core symmetry sectors, by layers of reactor core height and by fuel assembly group each symmetry sector. Moreover, this model allows to calculate important process-dependent parameters of the reactor (including axial offset as quantitative measure of its safety. As the mathematical and imitational models were improved, it allows to take into account intrinsic properties of the reactor core (including transient processes of xenon and thus reduce the error of modelling static and dynamic properties of the reactor.The automated control method of power change of the NPP unit with VVER-1000 was proposed for the first time. It uses three control loops. One of which maintains the regulatory change of reactor power by regulating the concentration of boric acid in the coolant, the second circuit keeps the required value of axial offset by changing the position of control rods, and the third one holds constant the coolant temperature mode by regulating the position of the main turbo generator valves.On the basis of the above obtained method, two control programs were improved. The first one is the improved control program that implements the constant temperature of the coolant in the first circuit and the second one is the improved control program that implements the constant steam pressure in the second circuit.

  5. Development of regulatory guide for review of aging management of the operating NPP

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Tae Myung; Lee, Jae Kyung [Cheongju Univ., Cheongju (Korea, Republic of); Kim, Young Ryul [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    2001-03-15

    This is the final report of the second year study. Based on the first year study, proposal of revised guidelines, analysis of revised or newly issued IAEA safety guides and reference guidelines of developed countries, and proposal of detailed guidelines of aging management in PSR have been performed in the second year study. The summary of results in the study so far can be summarized as below, overall view on PSR and idea of effective domestic application were leaded through additional investigation and comparison of legal basis, experiences and current status of PSR implementation among the countries having operating NPPs including Korea. Strategies of adequate application of PSR are roughly reevaluated and totally reestablished in summary from the analysis in factor by factor basis of PSR implementation experience in foreign countries and background of IAEA guidelines. Models and draft framework of PSR report in the first year study were summarized and reevaluated, and structure and outline options of PSR guidelines for judging the PSR report are newly proposed with comparison of their strengths and weaknesses based on the first year study. Among the opt ions, guidelines framework equivalent to the PSR report was picked up as the best. For the judgement of aging management, the most appropriate one was chosen for the detailed judgement of aging management review in our PSR being based on the Standard Review Plan for License Renewal (SRP-LR) in United States considering potential future usage in the judgement for continued operation of old NPP at the time of expiration of its design life. A draft PSR guidelines is prepared and attached by revision of basic guidelines issued in 2000, considering the issues discussed for the draft revision of IAEA PSR guide, the draft IAEA document about 'experience of PSR implementation of member states', and the characteristics of Hungarian PSR Guidelines.

  6. Modeling the transport of nitrogen in an NPP-2006 reactor circuit

    Science.gov (United States)

    Stepanov, O. E.; Galkin, I. Yu.; Sledkov, R. M.; Melekh, S. S.; Strebnev, N. A.

    2016-07-01

    Efficient radiation protection of the public and personnel requires detecting an accident-initiating event quickly. Specifically, if a heat-exchange tube in a steam generator is ruptured, the 16N radioactive nitrogen isotope, which contributes to a sharp increase in the steam activity before the turbine, may serve as the signaling component. This isotope is produced in the core coolant and is transported along the circulation circuit. The aim of the present study was to model the transport of 16N in the primary and the secondary circuits of a VVER-1000 reactor facility (RF) under nominal operation conditions. KORSAR/GP and RELAP5/Mod.3.2 codes were used to perform the calculations. Computational models incorporating the major components of the primary and the secondary circuits of an NPP-2006 RF were constructed. These computational models were subjected to cross-verification, and the calculation results were compared to the experimental data on the distribution of the void fraction over the steam generator height. The models were proven to be valid. It was found that the time of nitrogen transport from the core to the heat-exchange tube leak was no longer than 1 s under RF operation at a power level of 100% N nom with all primary circuit pumps activated. The time of nitrogen transport from the leak to the γ-radiation detection unit under the same operating conditions was no longer than 9 s, and the nitrogen concentration in steam was no less than 1.4% (by mass) of its concentration at the reactor outlet. These values were obtained using conservative approaches to estimating the leak flow and the transport time, but the radioactive decay of nitrogen was not taken into account. Further research concerned with the calculation of thermohydraulic processes should be focused on modeling the transport of nitrogen under RF operation with some primary circuit pumps deactivated.

  7. S-NPP VIIRS instrument telemetry and calibration data trend study

    Science.gov (United States)

    Sun, ZiPing; De Luccia, Frank J.; Cardema, Jason C.; Moy, Gabriel

    2015-09-01

    The Suomi National Polar Orbiting Partnership (S-NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) employs a large number of temperature and voltage sensors (telemetry points) to monitor instrument health and performance. We have collected data and built tools to study telemetry and calibration parameters trends. The telemetry points are organized into groups based on locations and functionalities. Examples of the groups are: telescope motor, focal plane array (FPA), scan cavity bulkhead, radiators, solar diffuser and Solar Diffuser Stability Monitor (SDSM). We have performed daily monitoring and long-term trending studies. Daily monitoring processes are automated with alarms built into the software to indicate if pre-defined limits are exceeded. Long-term trending studies focus on instrument performance and sensitivities of Sensor Data Record (SDR) products and calibration look-up tables (LUTs) to instrument temperature and voltage variations. VIIRS uses a DC Restore (DCR) process to periodically correct the analog offsets of each detector of each spectral band to ensure that the FPA output signals are always within the dynamic range of the Analog to Digital Converter (ADC). The offset values are updated based on observations of the On-Board Calibrator Blackbody source. We have performed a long-term trend study of DCR offsets and calibration parameters to explore connections of the DCR offsets with onboard calibrators. The study also shows how the instrument and calibration parameters respond to the VIIRS Petulant Mode, spacecraft (SC) anomalies and flight software (FSW) updates. We have also shown that trending studies of telemetry and calibration parameters may help to improve the instrument calibration processes and SDR Quality Flags.

  8. The challenge of the global management of plant design modifications. example of the new EJ system at Vandellos NPP

    Energy Technology Data Exchange (ETDEWEB)

    Ortega, Fernando; Valdivia, Carlos; Fernandez Illobre, Luis; Trueba, Pedro [Control Rooms and Simulation, Tecnatom, Avda. Montes de Oca, 1 - 28703 San Sebastian de los Reyes. Madrid (Spain)

    2010-07-01

    One of the most challenging areas in the operation of nuclear power plants (NPP) is related to the management of plant design modifications. Plant modifications can be made to improve reliability, facilitate operation, improve safety or get better results. In any of these situations, plant modifications imply many different activities that have to be done in a coordinated manner. NUREG-0711 (Human Factors Engineering Program Review Model) shows a global approach to manage most of these activities. Although this approach is mainly focused on the design and construction of new plants, it can also be applied to plant modification management. Successful global management will require performing every activity in a specific order, taking advantage of the output coming from some tasks as input for others and finalizing every task when necessary. This will provide the best results in terms of quality, time required for implementation, safe and reliable operation and maintenance, and cost. Tecnatom is involved in most of the activities related to the operational areas and has applied a global approach to get advantages in terms of quality and cost, which is outlined in this paper. As an example of this approach, the Vandellos NPP experience is shown in this presentation. Vandellos NPP carried out an important design modification that consists of replacing an old essential service water system with a new one. This was a three-year project that implied the construction of new reservoirs, new buildings, the implementation of new equipment, and new panels in the main control room. This paper shows the way in which all of these activities were performed. (authors)

  9. Surface Water Mapping from Suomi NPP-VIIRS Imagery at 30 m Resolution via Blending with Landsat Data

    Directory of Open Access Journals (Sweden)

    Chang Huang

    2016-07-01

    Full Text Available Monitoring the dynamics of surface water using remotely sensed data generally requires both high spatial and high temporal resolutions. One effective and popular approach for achieving this is image fusion. This study adopts a widely accepted fusion model, the Enhanced Spatial and Temporal Adaptive Reflectance Fusion Model (ESTARFM, for blending the newly available coarse-resolution Suomi NPP-VIIRS data with Landsat data in order to derive water maps at 30 m resolution. The Pan-sharpening technique was applied to preprocessing NPP-VIIRS data to achieve a higher-resolution before blending. The modified Normalized Difference Water Index (mNDWI was employed for mapping surface water area. Two fusion alternatives, blend-then-index (BI or index-then-blend (IB, were comparatively analyzed against a Landsat derived water map. A case study of mapping Poyang Lake in China, where water distribution pattern is complex and the water body changes frequently and drastically, was conducted. It has been revealed that the IB method derives more accurate results with less computation time than the BI method. The BI method generally underestimates water distribution, especially when the water area expands radically. The study has demonstrated the feasibility of blending NPP-VIIRS with Landsat for achieving surface water mapping at both high spatial and high temporal resolutions. It suggests that IB is superior to BI for water mapping in terms of efficiency and accuracy. The finding of this study also has important reference values for other blending works, such as image blending for vegetation cover monitoring.

  10. Training in fundamentals of radiological coverage in Laguna Verde NPP; Entrenamiento de fundamentos de coberturas radiologicas en la CLV

    Energy Technology Data Exchange (ETDEWEB)

    Lara H, M. A., E-mail: marcolarah@gmail.com [Comision Federal de Electricidad, Central Nucleoelectrica Laguna Verde, Carretera Cardel-Nautla Km. 42.5, Alto Lucero, Veracruz (Mexico)

    2014-10-15

    In 2010, the Institute of Nuclear Power Operations (INPO) celebrates the Knowledge Transfer and Retention Workshop, an event where nuclear regulators and operators presented the strategies that various NPP to worldwide were implemented to mitigate the consequences of this generational change and take advantage of it, the trend in the presented works was the same: the generational change occurs in a faster way that the transfer of knowledge, the future was already here and many NPP had not been adequately prepared to train its nuclear technicians and engineers in the tasks demanded by the industry of them, so in addition to preparing these workers to forced marches was necessary to establish strategies to retain at more experienced staff in the industry. The Laguna Verde NPP has not been exempt to this process; the preparation of personnel squares to replace those that reaching retirement age in the Comision Federal de Electricidad (CFE) has become extensive in the last five years, sometimes leading to have personnel covering functions without an alternate to the next lower position, the cause? Not enough staff. In the specific case of radiation protection (Rp) the time required for obtaining the status of Rp technician according to the ANSI/ANS 3.1 standard is 2 years, one of the tasks that most occupies part of these two years is training in radiological coverage, this training requires a mix of knowledge and experience, recently one of the concepts used for training in Rp is the evaluation and management of the radiological risk, topic that is considered in this technical work. (Author)

  11. RISKAUDIT Report no. 7, Vol. 1: Safety evaluation of VVER 440/213 and VVER 1000/320 reactors in Rovno NPP Units 1, 2 and 3. Final Report by AIB-Vincotte Nuclear, CIEMAT, ANPA, GRS, IPSN, AEA-T

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-07-15

    The Riskaudit 7 report has been made by a group of independent experts from Western European countries representing technical organizations specialized in the support of regulatory bodies of those countries. It represents a preliminary estimation of the Ukrainian WWER B 213 and B 320 reactors, based on the example of Rovno NPP, analysed with a Western practice. The first part of the document covers the following aspects of the report: core design and fuel management; pressurized components; electrical supply; instrumentation and control; containment; internal events; site conditions and external events.

  12. Annual and seasonal variations In the gamma activities in Sava river sediments upstream and downstream of NPP Krsko

    Energy Technology Data Exchange (ETDEWEB)

    Stipe, Lulic [Rudjer Boskovic Institute, Lab. for radioecology, Zagreb (Croatia)

    2006-07-01

    Results of the five years monitoring of artificial and natural occurring radionuclides in the Sava river sediments are presented. Measurements were conducted as a part of the regular Krsko Nuclear Power Plant radioactivity control and the independent supervisions of the input of radionuclides into larger environment (immission). In order to estimate seasonal variations samples were taken from seven locations (one upstream and five downstream of the Krsko NPP) during four sampling period (seasonal) in each year. Selected radionuclides in the sediment fractiess than 0.5 mm were determined with gamma spectrometer equipped with BE3830 model High Purity Ge detector with 30% relative efficiency. (authors)

  13. Application of the leak-before-break concept to the primary circuit piping of the Leningrad NPP

    Energy Technology Data Exchange (ETDEWEB)

    Eperin, A.P.; Zakharzhevsky, Yu.O.; Arzhaev, A.I. [and others

    1997-04-01

    A two-year Finnish-Russian cooperation program has been initiated in 1995 to demonstrate the applicability of the leak-before-break concept (LBB) to the primary circuit piping of the Leningrad NPP. The program includes J-R curve testing of authentic pipe materials at full operating temperature, screening and computational LBB analyses complying with the USNRC Standard Review Plan 3.6.3, and exchange of LBB-related information with emphasis on NDE. Domestic computer codes are mainly used, and all tests and analyses are independently carried out by each party. The results are believed to apply generally to RBMK type plants of the first generation.

  14. ON THE ROLE OF MUSHROOMS IN THE INTERNAL DOSE FORMATION TO THE POPULATION IN THE CHERNOBYL NPP ACCIDENT AFFECTED AREAS

    Directory of Open Access Journals (Sweden)

    A. V. Panov

    2014-01-01

    Full Text Available The present overview describes the results of the 25-year studies devoted to the estimation of the contribution of radionuclide containing mushrooms to the internal exposure dose to the population affected by the Chernobyl NPP accident. A significant increase with the time after the accident is shown for the contribution of mushrooms to the population internal exposure dose. Factors are identified influencing variability in the estimations of radionuclide from the mushroom component contribution to the population internal exposure dose.

  15. Simulation of Thermopower Influence on Fuel Core of Power Rod in Nuclear Power Plant (NPP Active Zone

    Directory of Open Access Journals (Sweden)

    I. S. Kulikov

    2010-01-01

    Full Text Available The paper considers problems of modern methods for  calculation of designs and materials of nuclear power. A model of numerical analysis for stress-strain state of fuel pins in the NPP active zone is proposed in the paper. The paper contains simulation concerning a fuel core section of a nuclear reactor heat-generating element with subsequent solution of a temperature and thermoelastic problem in computer program complex FEA ANSYS Workbench 11.0. All the obtained results have passed through checking procedure.

  16. Estimation of Net Primary Production (NPP) of Inner Mongolia in China

    Science.gov (United States)

    Park, J.; Kwak, Y.; Yasuda, Y.

    2009-12-01

    1. Introduction In the latter part of 1970's, the need for more precise calculation of the fixed-quantity of global land vegetation was emphasized. This data is necessary for estimating carbon income and expenditure at a global level. Research at the Mauna Loa volcano has clearly shown that the density of CO2 in the atmosphere is increasing. This increase is caused mainly by changes in human activities and the respiration of plants and animals. At present, however, the value of CO2 income and expenditure as calculated for human activities does not agree with the value thought to be contained in the marine and terrestrial carbon sinks. Clearly the value of primary production needs to be measured more precisely on a global scale. The use of satellite data immediately enables application at a global level, leading to higher precision of estimation when analyzing ecosystem models. In this study, we analyzed and compared Hohhot and Naiman, two regions in Inner Mongolia. In situ observation data (biomass and reflection data for each type of vegetation) was collected from 1999 to 2002. The results of these ground observations were then compared to the results from wide area measurement of vegetation index utilizing Terra/MODIS data 2. Application to satellite data The MODIS Surface Reflectance product (MOD09), with resolution of 250m, was utilized from April to November of 2002. MOD09 did atmosphere correction and geometric correction. Bands 1 (RED : 620-670nm) and 2 (NIR : 841-876nm) from MOD09 were used to produce a NDVI image. In addition, to remove the influence of cloud cover, monthly vegetation index images for May to September were generated using the Temporal Window Operation method (TWO : Park et al.1999), with the mid day of each month designated as a representative day. 3. Conclusion In this study, we estimate Net Primary Production (NPP) for a semiarid region of northern China using satellite data. An area in which pasturage is prohibited was studied in 1999

  17. Real-time management (RTM) by cloud computing system dynamics (CCSD) for risk analysis of Fukushima nuclear power plant (NPP) accident

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Hyo Sung [Yonsei Univ., Wonju Gangwon-do (Korea, Republic of). Dept. of Radiation Convergence Engineering; Woo, Tae Ho [Yonsei Univ., Wonju Gangwon-do (Korea, Republic of). Dept. of Radiation Convergence Engineering; The Cyber Univ. of Korea, Seoul (Korea, Republic of). Dept. of Mechanical and Control Engineering

    2017-03-15

    The earthquake and tsunami induced accident of nuclear power plant (NPP) in Fukushima disaster is investigated by the real-time management (RTM) method. This non-linear logic of the safety management is applied to enhance the methodological confidence in the NPP reliability. The case study of the earthquake is modeled for the fast reaction characteristics of the RTM. The system dynamics (SD) modeling simulations and cloud computing are applied for the RTM method where the real time simulation has the fast and effective communication for the accident remediation and prevention. Current tablet computing system can improve the safety standard of the NPP. Finally, the procedure of the cloud computing system dynamics (CCSD) modeling is constructed.

  18. Accounting for land use in life cycle assessment: The value of NPP as a proxy indicator to assess land use impacts on ecosystems.

    Science.gov (United States)

    Taelman, Sue Ellen; Schaubroeck, Thomas; De Meester, Steven; Boone, Lieselot; Dewulf, Jo

    2016-04-15

    Terrestrial land and its resources are finite, though, for economic and socio-cultural needs of humans, these natural resources are further exploited. It highlights the need to quantify the impact humans possibly have on the environment due to occupation and transformation of land. As a starting point of this paper (1(st) objective), the land use activities, which may be mainly socio-culturally or economically oriented, are identified in addition to the natural land-based processes and stocks and funds that can be altered due to land use. To quantify the possible impact anthropogenic land use can have on the natural environment, linked to a certain product or service, life cycle assessment (LCA) is a tool commonly used. During the last decades, many indicators are developed within the LCA framework in an attempt to evaluate certain environmental impacts of land use. A second objective of this study is to briefly review these indicators and to categorize them according to whether they assess a change in the asset of natural resources for production and consumption or a disturbance of certain ecosystem processes, i.e. ecosystem health. Based on these findings, two enhanced proxy indicators are proposed (3(rd) objective). Both indicators use net primary production (NPP) loss (potential NPP in the absence of humans minus remaining NPP after land use) as a relevant proxy to primarily assess the impact of land use on ecosystem health. As there are two approaches to account for the natural and productive value of the NPP remaining after land use, namely the Human Appropriation of NPP (HANPP) and hemeroby (or naturalness) concepts, two indicators are introduced and the advantages and limitations compared to state-of-the-art NPP-based land use indicators are discussed. Exergy-based spatially differentiated characterization factors (CFs) are calculated for several types of land use (e.g., pasture land, urban land).

  19. Remotely Sensed Estimation of Net Primary Productivity (NPP and Its Spatial and Temporal Variations in the Greater Khingan Mountain Region, China

    Directory of Open Access Journals (Sweden)

    Qiang Zhu

    2017-07-01

    Full Text Available We improved the CASA model based on differences in the types of land use, the values of the maximum light use efficiency, and the calculation methods of solar radiation. Then, the parameters of the model were examined and recombined into 16 cases. We estimated the net primary productivity (NPP using the NDVI3g dataset, meteorological data, and vegetation classification data from the Greater Khingan Mountain region, China. We assessed the accuracy and temporal-spatial distribution characteristics of NPP in the Greater Khingan Mountain region from 1982 to 2013. Based on a comparison of the results of the 16 cases, we found that different values of maximum light use efficiency affect the estimation more than differences in the fraction of photosynthetically active radiation (FPAR. However, the FPARmax and the constant Tε2 values did not show marked effects. Different schemes were used to assess different model combinations. Models using a combination of parameters established by scholars from China and the United States produced different results and had large errors. These ideas are meaningful references for the estimation of NPP in other regions. The results reveal that the annual average NPP in the Greater Khingan Mountain region was 760 g C/m2·a in 1982–2013 and that the inter-annual fluctuations were not dramatic. The NPP estimation results of the 16 cases exhibit an increasing trend. In terms of the spatial distribution of the changes, the model indicated that the values in 75% of this area seldom or never increased. Prominent growth occurred in the areas of Taipingling, Genhe, and the Oroqen Autonomous Banner. Notably, NPP decreased in the southeastern region of the Greater Khingan Mountains, the Hulunbuir Pasture Land, and Holingol.

  20. Evaluation of NPP-VIIRS Nighttime Light Data for Mapping Global Fossil Fuel Combustion CO2 Emissions: A Comparison with DMSP-OLS Nighttime Light Data.

    Directory of Open Access Journals (Sweden)

    Jinpei Ou

    Full Text Available Recently, the stable light products and radiance calibrated products from Defense Meteorological Satellite Program's (DMSP Operational Linescan System (OLS have been useful for mapping global fossil fuel carbon dioxide (CO2 emissions at fine spatial resolution. However, few studies on this subject were conducted with the new-generation nighttime light data from the Visible Infrared Imaging Radiometer Suite (VIIRS sensor on the Suomi National Polar-orbiting Partnership (NPP Satellite, which has a higher spatial resolution and a wider radiometric detection range than the traditional DMSP-OLS nighttime light data. Therefore, this study performed the first evaluation of the potential of NPP-VIIRS data in estimating the spatial distributions of global CO2 emissions (excluding power plant emissions. Through a disaggregating model, three global emission maps were then derived from population counts and three different types of nighttime lights data (NPP-VIIRS, the stable light data and radiance calibrated data of DMSP-OLS for a comparative analysis. The results compared with the reference data of land cover in Beijing, Shanghai and Guangzhou show that the emission areas of map from NPP-VIIRS data have higher spatial consistency of the artificial surfaces and exhibit a more reasonable distribution of CO2 emission than those of other two maps from DMSP-OLS data. Besides, in contrast to two maps from DMSP-OLS data, the emission map from NPP-VIIRS data is closer to the Vulcan inventory and exhibits a better agreement with the actual statistical data of CO2 emissions at the level of sub-administrative units of the United States. This study demonstrates that the NPP-VIIRS data can be a powerful tool for studying the spatial distributions of CO2 emissions, as well as the socioeconomic indicators at multiple scales.

  1. Evaluation of NPP-VIIRS Nighttime Light Data for Mapping Global Fossil Fuel Combustion CO2 Emissions: A Comparison with DMSP-OLS Nighttime Light Data

    Science.gov (United States)

    Ou, Jinpei; Liu, Xiaoping; Li, Xia; Li, Meifang; Li, Wenkai

    2015-01-01

    Recently, the stable light products and radiance calibrated products from Defense Meteorological Satellite Program’s (DMSP) Operational Linescan System (OLS) have been useful for mapping global fossil fuel carbon dioxide (CO2) emissions at fine spatial resolution. However, few studies on this subject were conducted with the new-generation nighttime light data from the Visible Infrared Imaging Radiometer Suite (VIIRS) sensor on the Suomi National Polar-orbiting Partnership (NPP) Satellite, which has a higher spatial resolution and a wider radiometric detection range than the traditional DMSP-OLS nighttime light data. Therefore, this study performed the first evaluation of the potential of NPP-VIIRS data in estimating the spatial distributions of global CO2 emissions (excluding power plant emissions). Through a disaggregating model, three global emission maps were then derived from population counts and three different types of nighttime lights data (NPP-VIIRS, the stable light data and radiance calibrated data of DMSP-OLS) for a comparative analysis. The results compared with the reference data of land cover in Beijing, Shanghai and Guangzhou show that the emission areas of map from NPP-VIIRS data have higher spatial consistency of the artificial surfaces and exhibit a more reasonable distribution of CO2 emission than those of other two maps from DMSP-OLS data. Besides, in contrast to two maps from DMSP-OLS data, the emission map from NPP-VIIRS data is closer to the Vulcan inventory and exhibits a better agreement with the actual statistical data of CO2 emissions at the level of sub-administrative units of the United States. This study demonstrates that the NPP-VIIRS data can be a powerful tool for studying the spatial distributions of CO2 emissions, as well as the socioeconomic indicators at multiple scales. PMID:26390037

  2. Evaluation of NPP-VIIRS Nighttime Light Data for Mapping Global Fossil Fuel Combustion CO2 Emissions: A Comparison with DMSP-OLS Nighttime Light Data.

    Science.gov (United States)

    Ou, Jinpei; Liu, Xiaoping; Li, Xia; Li, Meifang; Li, Wenkai

    2015-01-01

    Recently, the stable light products and radiance calibrated products from Defense Meteorological Satellite Program's (DMSP) Operational Linescan System (OLS) have been useful for mapping global fossil fuel carbon dioxide (CO2) emissions at fine spatial resolution. However, few studies on this subject were conducted with the new-generation nighttime light data from the Visible Infrared Imaging Radiometer Suite (VIIRS) sensor on the Suomi National Polar-orbiting Partnership (NPP) Satellite, which has a higher spatial resolution and a wider radiometric detection range than the traditional DMSP-OLS nighttime light data. Therefore, this study performed the first evaluation of the potential of NPP-VIIRS data in estimating the spatial distributions of global CO2 emissions (excluding power plant emissions). Through a disaggregating model, three global emission maps were then derived from population counts and three different types of nighttime lights data (NPP-VIIRS, the stable light data and radiance calibrated data of DMSP-OLS) for a comparative analysis. The results compared with the reference data of land cover in Beijing, Shanghai and Guangzhou show that the emission areas of map from NPP-VIIRS data have higher spatial consistency of the artificial surfaces and exhibit a more reasonable distribution of CO2 emission than those of other two maps from DMSP-OLS data. Besides, in contrast to two maps from DMSP-OLS data, the emission map from NPP-VIIRS data is closer to the Vulcan inventory and exhibits a better agreement with the actual statistical data of CO2 emissions at the level of sub-administrative units of the United States. This study demonstrates that the NPP-VIIRS data can be a powerful tool for studying the spatial distributions of CO2 emissions, as well as the socioeconomic indicators at multiple scales.

  3. NPP planning based on analysis of ground vibration caused by collapse of large-scale cooling towers

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Feng; Ji, Hongkui [Department of Structural Engineering, Tongji University, No. 1239 Siping Road, Shanghai 200092 (China); Gu, Xianglin, E-mail: gxl@tongji.edu.cn [Department of Structural Engineering, Tongji University, No. 1239 Siping Road, Shanghai 200092 (China); Li, Yi [Department of Structural Engineering, Tongji University, No. 1239 Siping Road, Shanghai 200092 (China); Wang, Mingreng; Lin, Tao [East China Electric Power Design Institute Co., Ltd, No. 409 Wuning Road, Shanghai 200063 (China)

    2015-12-15

    Highlights: • New recommendations for NPP planning were addressed taking into account collapse-induced ground vibration. • Critical factors influencing the collapse-induced ground vibration were investigated. • Comprehensive approach was presented to describe the initiation and propagation of collapse-induced disaster. - Abstract: Ground vibration induced by collapse of large-scale cooling towers can detrimentally influence the safe operation of adjacent nuclear-related facilities. To prevent and mitigate these hazards, new planning methods for nuclear power plants (NPPs) were studied considering the influence of these hazards. First, a “cooling tower-soil” model was developed, verified, and used as a numerical means to investigate ground vibration. Afterwards, five critical factors influencing collapse-induced ground vibration were analyzed in-depth. These influencing factors included the height and weight of the towers, accidental loads, soil properties, overlying soil, and isolation trench. Finally, recommendations relating to the control and mitigation of collapse-induced ground vibration in NPP planning were proposed, which addressed five issues, i.e., appropriate spacing between a cooling tower and the nuclear island, control of collapse modes, sitting of a cooling tower and the nuclear island, application of vibration reduction techniques, and the influence of tower collapse on surroundings.

  4. A Method to Analyze Threats and Vulnerabilities by Using a Cyber Security Test-bed of an Operating NPP

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yong Sik; Son, Choul Woong; Lee, Soo Ill [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    In order to implement cyber security controls for an Operating NPP, a security assessment should conduct in advance, and it is essential to analyze threats and vulnerabilities for a cyber security risk assessment phase. It might be impossible to perform a penetration test or scanning for a vulnerability analysis because the test may cause adverse effects on the inherent functions of ones. This is the reason why we develop and construct a cyber security test-bed instead of using real I and C systems in the operating NPP. In this paper, we propose a method to analyze threats and vulnerabilities of a specific target system by using a cyber security test-bed. The test-bed is being developed considering essential functions of the selected safety and non-safety system. This paper shows the method to analyze threats and vulnerabilities of a specific target system by using a cyber security test-bed. In order to develop the cyber security test-bed with both safety and non-safety functions, test-bed functions analysis and preliminary threats and vulnerabilities identification have been conducted. We will determine the attack scenarios and conduct the test-bed based vulnerability analysis.

  5. Construction scheduled delay risk assessment by using combined AHP-RII methodology for an international NPP project

    Energy Technology Data Exchange (ETDEWEB)

    Hossen, Mufazal Muhammed; Kang, Sun Koo; Kim, Jong Hyun [KEPCO International Nuclear Graduate School (KINGS), Ulsan (Korea, Republic of)

    2015-04-15

    In this study, Nuclear Power Plant (NPP) construction schedule delay risk assessment methodology is developed and the construction delay risk is assessed for turnkey international NPP projects. Three levels of delay factors were selected through literature review and discussions with nuclear industry experts. A questionnaire survey was conducted on the basis of an analytic hierarchy process (AHP) and Relative Importance Index (RII) methods and the schedule delay risk is assessed qualitatively and quantitatively by severity and frequency of occurrence of delay factors. This study assigns four main delay factors to the first level: main contractor, utility, regulatory authority, and financial and country factor. The second and the third levels are designed with 12 sub-factors and 32 sub-sub-factors, respectively. This study finds the top five most important sub-sub-factors, which are as follows: policy changes, political instability and public intervention; uncompromising regulatory criteria and licensing documents conflicting with existing regulations; robust design document review procedures; redesign due to errors in design and design changes; and worldwide shortage of qualified and experienced nuclear specific equipment manufacturers. The proposed combined AHP-RII methodology is capable of assessing delay risk effectively and efficiently. Decision makers can apply risk informed decision making to avoid unexpected construction delays of NPPs.

  6. Conceptual Design of Portable Filtered Air Suction Systems For Prevention of Released Radioactive Gas under Severe Accidents of NPP

    Energy Technology Data Exchange (ETDEWEB)

    Gu, Beom W.; Choi, Su Y.; Yim, Man S.; Rim, Chun T. [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2014-05-15

    It becomes evident that severe accidents may occur by unexpected disasters such as tsunami, heavy flood, or terror. Once radioactive material is released from NPP through severe accidents, there are no ways to prevent the released radioactive gas spreading in the air. As a remedy for this problem, the idea on the portable filtered air suction system (PoFASS) for the prevention of released radioactive gas under severe accidents was proposed. In this paper, the conceptual design of a PoFASS focusing on the number of robot fingers and robot arm rods are proposed. In order to design a flexible robot suction nozzle, mathematical models for the gaps which represent the lifted heights of extensible covers for given convex shapes of pipes and for the covered areas are developed. In addition, the system requirements for the design of the robot arms of PoFASS are proposed, which determine the accessible range of leakage points of released radioactive gas. In this paper, the conceptual designs of the flexible robot suction nozzle and robot arm have been conducted. As a result, the minimum number of robot fingers and robot arm rods are defined to be four and three, respectively. For further works, extensible cover designs on the flexible robot suction nozzle and the application of the PoFASS to the inside of NPP should be studied because the radioactive gas may be released from connection pipes between the containment building and auxiliary buildings.

  7. The possibilities of applying a risk-oriented approach to the NPP reliability and safety enhancement problem

    Science.gov (United States)

    Komarov, Yu. A.

    2014-10-01

    An analysis and some generalizations of approaches to risk assessments are presented. Interconnection between different interpretations of the "risk" notion is shown, and the possibility of applying the fuzzy set theory to risk assessments is demonstrated. A generalized formulation of the risk assessment notion is proposed in applying risk-oriented approaches to the problem of enhancing reliability and safety in nuclear power engineering. The solution of problems using the developed risk-oriented approaches aimed at achieving more reliable and safe operation of NPPs is described. The results of studies aimed at determining the need (advisability) to modernize/replace NPP elements and systems are presented together with the results obtained from elaborating the methodical principles of introducing the repair concept based on the equipment technical state. The possibility of reducing the scope of tests and altering the NPP systems maintenance strategy is substantiated using the risk-oriented approach. A probabilistic model for estimating the validity of boric acid concentration measurements is developed.

  8. Retrospective study of {sup 14}C concentration in the vicinity of NPP Jaslovské Bohunice using tree rings and the AMS technique

    Energy Technology Data Exchange (ETDEWEB)

    Ješkovský, Miroslav [CENTA Laboratory, Faculty of Mathematics, Physics and Informatics, Comenius University, 84248 Bratislava (Slovakia); Povinec, Pavel P., E-mail: Povinec@fmph.uniba.sk [CENTA Laboratory, Faculty of Mathematics, Physics and Informatics, Comenius University, 84248 Bratislava (Slovakia); Steier, Peter [VERA Laboratory, Faculty of Physics, University of Vienna, 1090 Vienna (Austria); Šivo, Alexander; Richtáriková, Marta [CENTA Laboratory, Faculty of Mathematics, Physics and Informatics, Comenius University, 84248 Bratislava (Slovakia); Golser, Robin [VERA Laboratory, Faculty of Physics, University of Vienna, 1090 Vienna (Austria)

    2015-10-15

    Atmospheric radiocarbon has been monitored around the Nuclear Power Plant (NPP) Jaslovské Bohunice (Slovakia) using CO{sub 2} absorption in NaOH solution since 1969. In 2012, tree ring samples were collected from Tilia cordata using an increment borer at Žlkovce monitoring station situated close to the Bohunice NPP. Each tree ring was identified and graphite targets were produced for {sup 14}C analysis by accelerator mass spectrometry. The {sup 14}C concentrations obtained from the tree-ring samples have been in a reasonable agreement with the averaged annual {sup 14}C concentrations in atmospheric CO{sub 2}.

  9. Redundant filtration system of the fuel buildings,units 1 and 2 Almaraz NPP; Sistema de filtracion redundante de los edificios de combustible unidades 1 y 2 de la central nuclear de almaraz

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Tanco, J.

    2011-07-01

    The project redundant filtering fuel buildings in units 1 and 2 of Almaraz NPP, will compliance to the requirements established in the complementary technical instructions to the authorization of exploitation of Almaraz NPP, established by the CSN and will consist of the installation of a new filtration unit.

  10. Experimental Studies for the VVER-440/213 Bubble Condenser System for Kola NPP at the Integral Test Facility BC V-213

    Directory of Open Access Journals (Sweden)

    Vladimir N. Blinkov

    2012-01-01

    Full Text Available In the frame of Tacis Project R2.01/99, which was running from 2003 to 2005, the bubble condenser system of Kola NPP (unit 3 was qualified at the integral test facility BC V-213. Three LB LOCA tests, two MSLB tests, and one SB LOCA test were performed. The appropriate test scenarios for BC V-213 test facility, modeling accidents in the Kola NPP unit 3, were determined with pretest calculations. Analysis of test results has shown that calculated initial conditions and test scenarios were properly reproduced in the tests. The detailed posttest analysis of the tests performed at BC V-213 test facility was aimed to validate the COCOSYS code for the calculation of thermohydraulic processes in the hermetic compartments and bubble condenser. After that the validated COCOSYS code was applied to NPP calculations for Kola NPP (unit 3. Results of Tacis R2.01/99 Project confirmed the bubble condenser functionality during large and small break LOCAs and MSLB accidents. Maximum loads were reached in the LB LOCA case. No condensation oscillations were observed.

  11. Project equipment HVAC chilled with R22 in the NPP Asco; Proyecto de sustitucion de equipos HVAC refrigerados con R22 en la C.N. Asco

    Energy Technology Data Exchange (ETDEWEB)

    Jaimot Jimenez, J. J.; Imbert, J. J.

    2013-07-01

    This paper describes the project of changing units of air conditioning in the Asco NPP currently used R22 as coolant. The project has a powerful, affecting 37 units, of which more than half are Clase1E. The document describes the process of sizing, scope of change and solutions adopted for this change of design.

  12. Application of noble metals on line in Cofrentes NPP and operation experience; Aplicacion de metales nobles en linea en C.N. Cofrentes y experiencia de operacion

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Zapata, J. D.

    2015-07-01

    Cofrentes NPP implemented in 2010 the Noble Metal Chemistry as a mitigation technique for the Primary System materials protection against IGSCC. the paper describes briefly the technology fundamentals, the implementation of the specific project, the initial application and the operating experience along the last 3 cycles of the plant. (Author)

  13. Investigation on seismic characteristic in Muria Peninsula to asses the NPP seismic design

    Energy Technology Data Exchange (ETDEWEB)

    Kusnowo, A. [National Atomic Energy Agency, Jakarta (Indonesia)

    1997-03-01

    A feasibility study on first nuclear power plant was conducted during 4,5 years started on 22 November 1991. This study consists of two parts. First, the non site study, Second part is the site and environmental study. The scope of non site studies are economic financing, technical and safety aspect as well as fuel cycle and waste management aspect. The site and environmental studied consist of site conditions and qualification, seismological, environmental condition as well as social economic and cultural impact. In the first step of site study (step 1), the result come up to the three candidates named Ujung Lemahabang, Ujung Watu and Ujung Grenggengan. Further study on geology, topography, oceanography, geophysics, hydrology, seismology, vulcanology, man induced event, etc was done on those three candidates (named as step 2). The results come up with Ujung Lemahabang as the best candidates. It is important to know basic, characteristic of seismicity of nuclear power plant sitting region for seismic hazard assessment this was done as step 3. This paper describe the results of step 3. (J.P.N.)

  14. Five years of gas flaring by country, oil field or flare observed by the Suomi NPP satellite

    Science.gov (United States)

    Zhizhin, M. N.; Elvidge, C.; Baugh, K.; Hsu, F. C.

    2016-12-01

    We will present a new methodology and the resulting interactive map and statistical estimates of flared gas volumes in 2012-2016 using multispectral infrared images from VIIRS radiometer at the Suomi NPP satellite. The high temperature gas flares are detected at the night side of the Earth with the Nightfire algorithm. Gas flares are distinct from biomass burning and industrial heat sources because they have higher temperatures. Sums of the radiative heat from the detected flares are calibrated with country-level flared volumes reported by CEDIGAZ. Statistical analysis of the database with accumulated 5 years of the Nightfire detections makes it possible to estimate instant flow rate for an individual flare, as well as integral flared volumes and long term trends for all the countries or oil and gas fields.

  15. Relap5/Mod3.1 analysis of main steam header rupture in VVER- 440/213 NPP

    Energy Technology Data Exchange (ETDEWEB)

    Kral, P. [Nuclear Research Inst. Rez (Switzerland)

    1995-12-31

    The presentation is focused on two main topics. First the applied modelling of PGV-4 steam generator for RELAP5 code are described. The results of steady-state calculation under reference conditions are compared against measured data. The problem of longitudinal subdivision of SG tubes is analysed and evaluated. Secondly, a best-estimate analysis of main steam header (MSH) rupture accident in WWER-440/213 NPP is presented. The low reliability of initiation of ESFAS signal `MSH Rupture` leads in this accident to big loss of secondary coolant, full depressurization of main steam system, extremely fast cool-down of both secondary and primary system, opening of PRZ SV-bypass valve with later liquid outflow, potential reaching of secondary criticality by failure of HPIS. 7 refs.

  16. Performance of the Clouds and the Earth's Radiant Energy System (CERES) Flight Model 5 (FM5) instrument on NPP mission

    Science.gov (United States)

    Thomas, Susan; Priestley, Kory J.; Hess, Phillip C.; Wilson, Robert S.; Smith, Nathaniel P.; Timcoe, Mark G.; Shankar, Mohan; Walikainen, Dale R.

    2012-09-01

    Clouds and the Earth's Radiant Energy System (CERES) instrument was designed to provide accurate measurements for the long-term monitoring of Earth's radiation energy budget. Flight Model 5, the sixth of the CERES instrument was launched aboard the NPP spacecraft on October 2011 and it has started the Earth-viewing measurements on January 26, 2012. The CERES instrument with the three scanning sensors measure radiances in 0.3 to 5.0 micron region with Shortwave sensor, 0.3 to elevation offset in the sensor measurement will be determined from the spacecraft pitch manuveur activity viewing the deep space. This paper covers the early-orbit checkout activities and the overall performance of the CERES-FM5 instrument. The postlaunch calibration and the validation results from the instrument are presented.

  17. Cytogenetic examination of persons working in the area of radiation accident at the Fukushima-1 NPP in Japan

    Directory of Open Access Journals (Sweden)

    Nugis V.Yu.

    2014-12-01

    Full Text Available Purpose: biological dose indication of employees of the Ministry of Emergency Situations of Russia who took part in the work in Japan in connection with the accident at Fukushima-1 NPP and several journalists covering this event. Material and methods. The analysis of chromosomal aberrations in peripheral blood lymphocyte cultures of 46 people was performed. Results. The frequency of chromosomal damages exceeded background levels in only 3 people, and aberration character testified irradiation in previous situations. Conclusion. The significant overexposure of these workers during they stayed in Japan is absent, however it is necessary to perform a preliminary analysis of chromosome aberrations if you intend to exercise of biological dose indication after returning of people from areas of potential exposure.

  18. Radiometric Inter-Calibration between Himawari-8 AHI and S-NPP VIIRS for the Solar Reflective Bands

    Directory of Open Access Journals (Sweden)

    Fangfang Yu

    2016-02-01

    Full Text Available The Advanced Himawari Imager (AHI on-board Himawari-8, which was launched on 7 October 2014, is the first geostationary instrument housed with a solar diffuser to provide accurate onboard calibrated data for the visible and near-infrared (VNIR bands. In this study, the Ray-matching and collocated Deep Convective Cloud (DCC methods, both of which are based on incidently collocated homogeneous pairs between AHI and Suomi NPP (S-NPP Visible Infrared Imaging Radiometer Suite (VIIRS, are used to evaluate the calibration difference between these two instruments. While the Ray-matching method is used to examine the reflectance difference over the all-sky collocations with similar viewing and illumination geometries, the near lambertian collocated DCC pxiels are used to examine the difference for the median or high reflectance scenes. Strong linear relationships between AHI and VIIRS can be found at all the paired AHI and VIIRS bands. Results of both methods indicate that AHI radiometric calibration accuracy agrees well with VIIRS data within 5% for B1-4 and B6 at mid and high reflectance scenes, while AHI B5 is generally brighter than VIIRS by ~6%–8%. No apparent East-West viewing angle dependent calibration difference can be found at all the VNIR bands. Compared to the Ray-matching method, the collocated DCC method provides less uncertainty of inter-calibration results at near-infrared (NIR bands. As AHI has similar optics and calibration designs to the GOES-R Advanced Baseline Imager (ABI, which is currently scheduled to launch in fall 2016, the on-orbit AHI data provides a unique opportunity to develop, test and examine the cal/val tools developed for ABI.

  19. Inter-comparison of NPP/CrIS radiances with VIIRS, AIRS, and IASI: a post-launch calibration assessment

    Science.gov (United States)

    Wang, Likun; Han, Yong; Tremblay, Denis; Weng, Fuzhong; Goldberg, Mitchell

    2012-11-01

    The Cross-track Infrared Sounder (CrIS) on the newly-launched Suomi National Polar-orbiting Partnership (Suomi NPP) is a Fourier transform spectrometer that provides soundings of the atmosphere with 1305 spectral channels, over 3 wavelength ranges: LWIR (9.14 - 15.38 μm) MWIR (5.71 - 8.26 μm) and SWIR (3.92 - 4.64 μm). An accurate spectral and radiometric calibration as well as geolocation is fundamental for CrIS radiance Sensor Data Records (SDRs). In this study, through inter- and intra-satellite calibration efforts, we focus on assessment of NPP/CrIS post-launch performance. First, we compare CrIS hyperspectral radiance measurements with the Atmospheric Infrared Sounder (AIRS) on NASA Earth Observing System (EOS) Aqua and Infrared Atmospheric Sounding Interferometer (IASI) on Metop-A to examine spectral and radiometric consistence and difference among three hyperspectral IR sounders. Secondly, an accurate collocation algorithm has been developed to collocate high spatial resolution measurements from the Visible Infrared Imager Radiometer Suite (VIIRS) within each CrIS Field of View (FOV). We compare CrIS spectrally-averaged radiances with the spatially-averaged and collocated pixels from the VIIRS IR channels. Since CrIS and VIIRS are onboard on the same satellite platform, the intra-satellite comparison will allow examining the radiometric difference between CrIS and VIIRS with scene temperatures, scan angles, and orbital position. In addition, given a high spatial resolution of VIIRS channels, the VIIRS-CrIS comparison results can access geolocation accuracy of CrIS that have relatively large FOVs (14 km at ndair) using high resolution VIIRS pixel (375m or 750m at nadir).

  20. Modelling changes in nitrogen cycling to sustain increases in forest productivity under elevated atmospheric CO2 and contrasting site conditions

    Science.gov (United States)

    Grant, R. F.

    2013-11-01

    If increases in net primary productivity (NPP) caused by rising concentrations of atmospheric CO2 (Ca) are to be sustained, key N processes such as soil mineralization, biological fixation, root uptake and nutrient conservation must also be increased. Simulating the response of these processes to elevated Ca is therefore vital for models used to project the effects of rising Ca on NPP. In this modelling study, hypotheses are proposed for changes in soil mineralization, biological fixation, root nutrient uptake and plant nutrient conservation with changes in Ca. Algorithms developed from these hypotheses were tested in the ecosystem model ecosys against changes in N and C cycling measured over several years under ambient vs. elevated Ca in Free Air CO2 Enrichment (FACE) experiments in the USA at the Duke Forest in North Carolina, the Oak Ridge National Laboratory forest in Tennessee, and the USDA research forest in Wisconsin. More rapid soil N mineralization was found to be vital for simulating sustained increases in NPP measured under elevated vs. ambient Ca at all three FACE sites. This simulation was accomplished by priming decomposition of N-rich humus from increases in microbial biomass generated by increased litterfall modelled under elevated Ca. Greater nonsymbiotic N2 fixation from increased litterfall, root N uptake from increased root growth, and plant N conservation from increased translocation under elevated Ca were found to make smaller contributions to simulated increases in NPP. However greater nutrient conservation enabled larger increases in NPP with Ca to be modelled with coniferous vs. deciduous plant functional types. The effects of these processes on productivity now need to be examined over longer periods under transient rises in Ca and a greater range of site conditions.

  1. The distribution of radionuclides between the sediments and macrophytes in the cooling pond of the Ignalina NPP - The Distribution of Radionuclides in Freshwater Hydro Ecosystem's Bottom Sediments and Macrophytes depending on the Ecological Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Marciulioniene, D.; Jefanova, O.; Mazeika, J. [Nature Research Centre, Akademijos str. 2, LT-08412 Vilnius, Lietuva (Lithuania)

    2014-07-01

    The distribution of {sup 137}Cs, {sup 60}Co, {sup 54}Mn in the aquatory of lake Drukshiai (the monitoring stations), the coastal area of this lake, the industrial drainage systems channel of the Ignalina NPP and the cooling water channel of the Ignalina NPP was analyzed on the basis of long-term (1988-2009) investigations of radionuclides specific activity in bottom sediments and macrophytes, also the ability of radionuclides falling into lake Drukshiai from the Ignalina NPP through effluents channels was assessed. It was established that {sup 137}Cs, {sup 60}Co and {sup 54}Mn in the bottom sediments and the macrophytes were distributed quite differently in the monitoring stations of lake Drukshiai and the coastal area as well as in the industrial drainage systems channel of the Ignalina NPP and the cooling water channel of the Ignalina NPP. The different characteristics of the sediments, various ecological conditions, as well as the existing anthropogenic environmental factors and the different in the ecological groups of the plants could have had impact on the distribution of {sup 137}Cs, {sup 60}Co and {sup 54}Mn in the bottom sediments and the aquatic plants in lake Drukshiai and the effluents channels of the Ignalina NPP. The {sup 137}Cs, {sup 60}Co and {sup 54}Mn specific activity's values were significantly higher in macrophytes from the industrial drainage systems channel of Ignalina NPP than in macrophytes from the cooling water channel. Nevertheless the specific activities level of these radionuclides differed only slightly in the macrophytes from the areas which were impacted by the effluents channels of the Ignalina NPP. This can be explained by the fact that the phyto-remediation (as the form of auto-purification) of these effluents from the radionuclides had been present in the industrial drainage systems channel of Ignalina NPP before entering the water into lake Drukshiai. (authors)

  2. Possible sites for future nuclear power plants in Israel

    Energy Technology Data Exchange (ETDEWEB)

    Yaar, Ilan, E-mail: ilany@energy.gov.il [Ministry of National Infrastructure, Energy and Water Resources, Chief Scientist Office, 14 Hartum St., POB 36148, Jerusalem 9136002 (Israel); Walter, Ayelet [Ministry of National Infrastructure, Energy and Water Resources, Chief Scientist Office, 14 Hartum St., POB 36148, Jerusalem 9136002 (Israel); Sanders, Yovav [Sysnet Group, Habarzel St. 32, Tel Aviv 69710 (Israel); Felus, Yaron [Survey of Israel, 1 Lincoln St., POB 14171, Tel-Aviv 61141 (Israel); Calvo, Ran; Hamiel, Yariv [Geological Survey of Israel, 30 Malkhe Israel St., Jerusalem 95501 (Israel)

    2016-03-15

    A preliminary work aimed at allocating suitable new sites for possible NPPs in Israel is presented. The work is based on Israel's present NPP siting criteria, supported by selected procedure performed by various countries that conducted similar process. The site selection process was conducted in two stages: first, a selection procedure using demographic analysis was conducted; second, a seismological and geological analysis process was performed in the remaining area. From the combined two screening processes results, an overall new area of 569 km{sup 2} was located as a possible area for future construction of NPPs in Israel. Further and more comprehensive work, based on the IAEAs site selection guidelines, has to be performed in the future, in order to verify the preliminary findings presented in this work.

  3. GHRSST 2 Level 2P Global Skin Sea Surface Temperature from the Visible Infrared Imaging Radiometer Suite (VIIRS) on the Suomi NPP satellite created by the NOAA Advanced Clear-Sky Processor for Ocean (ACSPO) (GDS version 2)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Joint Polar Satellite System (JPSS), starting with S-NPP launched on 28 October 2011, is the new generation of the US Polar Operational Environmental Satellites...

  4. VERONA V6.22 – An enhanced reactor analysis tool applied for continuous core parameter monitoring at Paks NPP

    Energy Technology Data Exchange (ETDEWEB)

    Végh, J., E-mail: janos.vegh@ec.europa.eu [Institute for Energy and Transport of the Joint Research Centre of the European Commission, Postbus 2, NL-1755 ZG Petten (Netherlands); Pós, I., E-mail: pos@npp.hu [Paks Nuclear Power Plant Ltd., H-7031 Paks, P.O. Box 71 (Hungary); Horváth, Cs., E-mail: csaba.horvath@energia.mta.hu [Centre for Energy Research, Hungarian Academy of Sciences, H-1525 Budapest 114, P.O. Box 49 (Hungary); Kálya, Z., E-mail: kalyaz@npp.hu [Paks Nuclear Power Plant Ltd., H-7031 Paks, P.O. Box 71 (Hungary); Parkó, T., E-mail: parkot@npp.hu [Paks Nuclear Power Plant Ltd., H-7031 Paks, P.O. Box 71 (Hungary); Ignits, M., E-mail: ignits@npp.hu [Paks Nuclear Power Plant Ltd., H-7031 Paks, P.O. Box 71 (Hungary)

    2015-10-15

    Between 2003 and 2007 the Hungarian Paks NPP performed a large modernization project to upgrade its VERONA core monitoring system. The modernization work resulted in a state-of-the-art system that was able to support the reactor thermal power increase to 108% by more accurate and more frequent core analysis. Details of the new system are given in Végh et al. (2008), the most important improvements were as follows: complete replacement of the hardware and the local area network; application of a new operating system and porting a large fraction of the original application software to the new environment; implementation of a new human-system interface; and last but not least, introduction of new reactor physics calculations. Basic novelty of the modernized core analysis was the introduction of an on-line core-follow module based on the standard Paks NPP core design code HELIOS/C-PORCA. New calculations also provided much finer spatial resolution, both in terms of axial node numbers and within the fuel assemblies. The new system was able to calculate the fuel applied during the first phase of power increase accurately, but it was not tailored to determine the effects of burnable absorbers as gadolinium. However, in the second phase of the power increase process the application of fuel assemblies containing three fuel rods with gadolinium content was intended (in order to optimize fuel economy), therefore off-line and on-line VERONA reactor physics models had to be further modified, to be able to handle the new fuel according to the accuracy requirements. In the present paper first a brief overview of the system version (V6.0) commissioned after the first modernization step is outlined; then details of the modified off-line and on-line reactor physics calculations are described. Validation results for new modules are treated extensively, in order to illustrate the extent and complexity of the V&V procedure associated with the development and licensing of the new

  5. Consistent High-Quality Global SO2 and HCHO Datasets from EOS Aura/OMI and Suomi NPP/OMPS

    Science.gov (United States)

    Li, C.; Joiner, J.; Krotkov, N. A.; Fioletov, V.; McLinden, C. A.; Zhang, Y.

    2015-12-01

    We report on recent effort and progress at NASA Goddard Space Flight Center in developing consistent SO2 and HCHO retrieval products from Aura/Ozone Monitoring Instrument (OMI) and Suomi National Polar-orbiting Partnership (S-NPP)/Ozone Mapping and Profiler Suite (OMPS) nadir mapper. Given the substantial differences between OMI and OMPS in several key aspects, such as spatial and spectral resolution and signal-to-noise ratio, a major challenge in ensuring data continuity between the two instruments is to properly account for different instrument characteristics as well as instruments' degradation over time. To this end, we have developed an innovative approach based on principal component analysis (PCA) of measured Earthshine radiances. We utilize a PCA technique to extract a series of spectral features (principal components or PCs) explaining the variance of measured reflectance spectra, associated with both physical processes (e.g., ozone absorption, rotational Raman scattering) and measurement details (e.g., wavelength shift). By fitting these PCs along with pre-computed Jacobians for our target species (SO2 or HCHO) to the measured radiance spectra, we can estimate the atmospheric loading of SO2 or HCHO while minimizing the impacts of interfering processes and measurement imperfection on retrievals. Since no explicit instrument-specific radiance data correction scheme is required, the PCA method is easily implemented with both OMI and OMPS and maximizes data continuity. The PCA algorithm currently runs operationally in the production of the new generation NASA standard OMI planetary boundary layer (PBL) SO2 data that have been shown to improve the detection limit of anthropogenic SO2 emission sources by a factor of two, as compared with the previous generation product. In this presentation, we will demonstrate that the PCA algorithm can produce SO2 and HCHO retrievals from OMPS that have comparable data quality with our OMI retrievals. We will also demonstrate

  6. Modelling changes in nitrogen cycling to sustain increases in forest productivity under elevated atmospheric CO2 and contrasting site conditions

    Directory of Open Access Journals (Sweden)

    R. F. Grant

    2013-04-01

    Full Text Available If increases in net primary productivity (NPP caused by rising concentrations of atmospheric CO2 (Ca are to be sustained, key N processes such as soil mineralization, biological fixation, root uptake and plant translocation must be hastened. Simulating the response of these processes to elevated Ca is therefore vital for models used to project the effects of rising Ca on NPP. In this modelling study, hypotheses are proposed for changes in soil mineralization, biological fixation, root uptake and plant translocation with changes in Ca. Algorithms developed from these hypotheses were tested in the ecosystem model ecosys against changes in N and C cycling measured over several years under ambient vs. elevatedCa in Free Air CO2 Enrichment (FACE experiments at the Duke Forest in North Carolina, the Oak Ridge National Laboratory forest in Tennessee, and the USDA research forest in Wisconsin, USA. Simulating more rapid soil N mineralization was found to be vital for modelling sustained increases in NPP measured under elevated vs. ambient Ca at all three FACE sites. This simulation was accomplished by priming decomposition of N-rich humus from increases in microbial biomass generated by increased litterfall modelled under elevated Ca. Simulating more rapid nonsymbiotic N2 fixation, root N uptake and plant N translocation under elevated Ca was found to make much smaller contributions to modelled increases in NPP, although such contributions might be greater over longer periods and under more N-limited conditions than those simulated here. Greater increases in NPP with Ca were also modelled with increased temperature and water stress, and with coniferous vs. deciduous plant functional types. These increases were also associated with changes in N cycling.

  7. Fukushima impact on Asco NPP; Impacto de Fukushima en C. N. Asco

    Energy Technology Data Exchange (ETDEWEB)

    Sabater, J.; Hernandez, R.

    2015-07-01

    The accident at Fukushima convulsed the Japanese and international society in all walks of life. The Nuclear Safety Council, apply for nuclear power plants to carry out in record time what they call {sup r}esistance tests ANAV and in particular Asco responded to requirements through a reanalysis of the external events, an analysis of the consequences of nomination deterministic event of the total loss of heat sink and lost total power and finally an analysis of the capacities of the plant to respond to a condition of severe accident that would affect the two units of the site. (Author)

  8. Technical aspects of the process of segmentation and packaging of the reactor vessel of Jose Cabrera NPP; Aspectos tecnicos del proceso de segmentacion y embalaje de la vasija del reactor de la central nuclear Jose Cabrera

    Energy Technology Data Exchange (ETDEWEB)

    Valdivieso, J. M.; Garcia Castro, R.

    2015-07-01

    Westinghouse is carrying out the segmentation of the reactor pressure vessel (RPV) within the framework of the Dismantling and Decommissioning Project of the Jose Cabrera NPP. The final concept is based on the comprehensive Westinghouse experience in the field of LWR pressure vessel and internals segmentation, and particularly in previous reactor internals segmentation project for Jose Cabrera NPP. This article shows the development of all the activities included: cutting method selection, preparatory works, cutting activities, waste characterization and packaging activities. (Author)

  9. The Influences of Drought and Land-Cover Conversion on Inter-Annual Variation of NPP in the Three-North Shelterbelt Program Zone of China Based on MODIS Data.

    Science.gov (United States)

    Peng, Dailiang; Wu, Chaoyang; Zhang, Bing; Huete, Alfredo; Zhang, Xiaoyang; Sun, Rui; Lei, Liping; Huang, Wenjing; Liu, Liangyun; Liu, Xinjie; Li, Jun; Luo, Shezhou; Fang, Bin

    2016-01-01

    Terrestrial ecosystems greatly contribute to carbon (C) emission reduction targets through photosynthetic C uptake.Net primary production (NPP) represents the amount of atmospheric C fixed by plants and accumulated as biomass. The Three-North Shelterbelt Program (TNSP) zone accounts for more than 40% of China's landmass. This zone has been the scene of several large-scale ecological restoration efforts since the late 1990s, and has witnessed significant changes in climate and human activities.Assessing the relative roles of different causal factors on NPP variability in TNSP zone is very important for establishing reasonable local policies to realize the emission reduction targets for central government. In this study, we examined the relative roles of drought and land cover conversion(LCC) on inter-annual changes of TNSP zone for 2001-2010. We applied integrated correlation and decomposition analyses to a Standardized Evapotranspiration Index (SPEI) and MODIS land cover dataset. Our results show that the 10-year average NPP within this region was about 420 Tg C. We found that about 60% of total annual NPP over the study area was significantly correlated with SPEI (p<0.05). The LCC-NPP relationship, which is especially evident for forests in the south-central area, indicates that ecological programs have a positive impact on C sequestration in the TNSP zone. Decomposition analysis generally indicated that the contributions of LCC, drought, and other Natural or Anthropogenic activities (ONA) to changes in NPP generally had a consistent distribution pattern for consecutive years. Drought and ONA contributed about 74% and 23% to the total changes in NPP, respectively, and the remaining 3% was attributed to LCC. Our results highlight the importance of rainfall supply on NPP variability in the TNSP zone.

  10. The Influences of Drought and Land-Cover Conversion on Inter-Annual Variation of NPP in the Three-North Shelterbelt Program Zone of China Based on MODIS Data.

    Directory of Open Access Journals (Sweden)

    Dailiang Peng

    Full Text Available Terrestrial ecosystems greatly contribute to carbon (C emission reduction targets through photosynthetic C uptake.Net primary production (NPP represents the amount of atmospheric C fixed by plants and accumulated as biomass. The Three-North Shelterbelt Program (TNSP zone accounts for more than 40% of China's landmass. This zone has been the scene of several large-scale ecological restoration efforts since the late 1990s, and has witnessed significant changes in climate and human activities.Assessing the relative roles of different causal factors on NPP variability in TNSP zone is very important for establishing reasonable local policies to realize the emission reduction targets for central government. In this study, we examined the relative roles of drought and land cover conversion(LCC on inter-annual changes of TNSP zone for 2001-2010. We applied integrated correlation and decomposition analyses to a Standardized Evapotranspiration Index (SPEI and MODIS land cover dataset. Our results show that the 10-year average NPP within this region was about 420 Tg C. We found that about 60% of total annual NPP over the study area was significantly correlated with SPEI (p<0.05. The LCC-NPP relationship, which is especially evident for forests in the south-central area, indicates that ecological programs have a positive impact on C sequestration in the TNSP zone. Decomposition analysis generally indicated that the contributions of LCC, drought, and other Natural or Anthropogenic activities (ONA to changes in NPP generally had a consistent distribution pattern for consecutive years. Drought and ONA contributed about 74% and 23% to the total changes in NPP, respectively, and the remaining 3% was attributed to LCC. Our results highlight the importance of rainfall supply on NPP variability in the TNSP zone.

  11. Considerations on Improving Seismic Design at NPP Emergency Response Center after Fukushima Daiichi NPP Accident%福岛核事故后对我国核电厂应急控制中心抗震设防的思考

    Institute of Scientific and Technical Information of China (English)

    付强; 陈晓秋; 岳会国; 潘蓉

    2011-01-01

    结合福岛核事故后对我国核电厂进行的核安全检查,分析了我国核安全法规关于核电厂应急控制中心的要求以及福岛核事故的经验教训,提出目前我国核电厂应急控制中心采用民用抗震设防标准进行抗震设防,无法保证在由地震引发的应急事故工况下应急控制中心的功能,应该适当提高其抗震设防级别。%Based on the nuclear safety impections at NPPs carried out in China in the aftermash of Fukushima Daiichi NPP accident, the requirements for NPP emergency response centers in the nuclear safety regulations and the lessons of the Fukushima Daiichi NPP accident are analylzed. The seismic design of the current NPP emergency response centers in China, based on the civil building seismic design code, is considered to be unable to ensure the function of emergency response centers in emergency accident conditions caused by earthquake, except as otherwise impporved.

  12. Process for evaluation of renewal of the operating permit for Garona NPP.; Proceso para la evaluacion de la renovacion de la autorizacion de explotacion de Garona

    Energy Technology Data Exchange (ETDEWEB)

    Zarzuela Jimenez, J.

    2009-07-01

    Process for evaluation of renewal of the operating permit for Garona NPP. The Santa Maria de Garona nuclear power plant has requested the renewal of its operating permit for a period of ten years, this implying extension of the operating lifetime of the facility beyond the 40 years originally established. This article explains the process of evaluation that the CN is carrying out in order to draw up a report on the technical feasibility of this proposal. (Author)

  13. Adaptation of the electric system of Almaraz NPP ATEX (explosive atmospheres); Adaptacion del Sistema Electrico de la CN de Almaraz a la normativa ATEX (Atmosferas Exposivas)

    Energy Technology Data Exchange (ETDEWEB)

    Felix, E.

    2014-07-01

    To comply with Royal Decree 681/2003, which assimilates Directive 1999/92/CE of the European Parliament and of the Council, ATEX Classified Zones were defined by Almaraz NPP, along with the equipment located in these areas that are possible sources of ignition. The facilities were then adapted accordingly, either by moving the equipment outside the classified zones or replacing it with ATEX marked equipment. The bases for choosing this equipment are briefly explained in this paper. (Author)

  14. Organization and management of maintenance in the NPP's Asco and Vandellos II; Organizacion y gestion del mantenimiento en las centrales nucleares Asco y Vandellos II

    Energy Technology Data Exchange (ETDEWEB)

    Folguera, M.; Corral, A.

    2014-04-01

    The article starts with a description of the international framework that, using technical instructions, guides and guidelines, regulates the maintenance of nuclear power plants. It also outlines the characteristics of the organization and management of maintenance in the NPP's operated by ANAV. Such management is supported in a variety of processes and programs among which are: work management, training and qualification, operational experience, supervision, foreign material exclusion, work management in RP areas and outage preparation. (Author)

  15. Uncertainties in carbon residence time and NPP-driven carbon uptake in terrestrial ecosystems of the conterminous USA: a Bayesian approach

    Directory of Open Access Journals (Sweden)

    Xuhui Zhou

    2012-10-01

    Full Text Available Carbon (C residence time is one of the key factors that determine the capacity of ecosystem C storage. However, its uncertainties have not been well quantified, especially at regional scales. Assessing uncertainties of C residence time is thus crucial for an improved understanding of terrestrial C sequestration. In this study, the Bayesian inversion and Markov Chain Monte Carlo (MCMC technique were applied to a regional terrestrial ecosystem (TECO-R model to quantify C residence times and net primary productivity (NPP-driven ecosystem C uptake and assess their uncertainties in the conterminous USA. The uncertainty was represented by coefficient of variation (CV. The 13 spatially distributed data sets of C pools and fluxes have been used to constrain TECO-R model for each biome (totally eight biomes. Our results showed that estimated ecosystem C residence times ranged from 16.6±1.8 (cropland to 85.9±15.3 yr (evergreen needleleaf forest with an average of 56.8±8.8 yr in the conterminous USA. The ecosystem C residence times and their CV were spatially heterogeneous and varied with vegetation types and climate conditions. Large uncertainties appeared in the southern and eastern USA. Driven by NPP changes from 1982 to 1998, terrestrial ecosystems in the conterminous USA would absorb 0.20±0.06 Pg C yr−1. Their spatial pattern was closely related to the greenness map in the summer with larger uptake in central and southeast regions. The lack of data or timescale mismatching between the available data and the estimated parameters lead to uncertainties in the estimated C residence times, which together with initial NPP resulted in the uncertainties in the estimated NPP-driven C uptake. The Bayesian approach with MCMC inversion provides an effective tool to estimate spatially distributed C residence time and assess their uncertainties in the conterminous USA.

  16. Fukushima Daiichi accident as a stress test for the national system for the protection of the public in event of severe accident at NPP

    Directory of Open Access Journals (Sweden)

    V.A. Kutkov

    2017-03-01

    Full Text Available It is proposed that the circumstances of the Fukushima Daiichi nuclear accident on 11 March 2011 in Japan should be used as the framework for the stress test of the national system for the protection of public in the beyond design extension conditions at NPP. Stress tests of the public protection strategy show to what extent the national system is stable under the most unfavorable NPP conditions and give an understanding of the potential vulnerabilities and the ways to resolve them. A definition of the Fukushima stress test model has been provided, and the actions undertaken by Japanese authorities under the conditions of the Fukushima Daiichi accident have been considered as the response to this stress test. The stress test has revealed major vulnerabilities in the strategy for the protection of public in the event of an accident at an NPP, which was successfully proven many times by over a hundred exercises at different levels. The stress test showed that the principal vulnerability of protection strategy being in use in Japan in 2011 was the reliance on computer systems in the assessment of the emergency exposure for decision-making during the emergency response phase. It is proposed, that the Fukushima stress test should be used to identify the vulnerabilities in the Russian Federation's strategy for the protection of public in the event of a nuclear accident and to use the lessons learnt from the test results to perfect this strategy.

  17. Radioecologycal study of 239/240Pu in Bangka Island and Muria Peninsula: Determination of 239/240Pu in marine sediment and seawater as part of baseline data collecting for sitting of candidates of first Indonesia NPP

    Science.gov (United States)

    Suseno, Heny; Wisnubroto, Djarot S.

    2014-03-01

    Radioisotope Pu-239/240 are alpha emitting nuclides important indicators of radioactive contamination of the marine environment. Global fallout is the main source of plutonium in the marine environment. There are very limited study on 239/240Pu in Indonesia coastal environments. The data of this radioisotopes is needed for baseline data of nuclear power plant (NPP) site candidates both in Bangka Island and Muria Peninsula. Bottom sediments play an important role in radioecological studies of the marine environment because a large proportion of radioactive substances entering the sea is adsorbed over time onto suspended particulate matter and deposited in sediments. Plutonium is particle reactive and deposited in marine sediment. Radioisotope 239/240Pu was determinated by alpha spectrometry after radiochemical procedure that was performed in both water and marine sediment from Bangka Island and Muria Peninsula. The sediment baseline of concentration 239/240Pu in Bangka Island and Muria Peninsula were range from 0.013 to 0.021 Bq.kg-1 and 0.018 to 0.024 Bq.kg-1 respectively. The water baseline concentration this isotope were range from 2.73 to 4.05 mBq.m-3 and 2.98 to 4.50 mBq.m-3.

  18. Radioecologycal study of {sup 239/240}Pu in Bangka Island and Muria Peninsula: Determination of {sup 239/240}Pu in marine sediment and seawater as part of baseline data collecting for sitting of candidates of first Indonesia NPP

    Energy Technology Data Exchange (ETDEWEB)

    Suseno, Heny, E-mail: henis@batan.go.id [Radioactive Waste Technology Center - The Indonesian National Nuclear Energy Agency (Indonesia); Wisnubroto, Djarot S. [The Indonesian National Nuclear Energy Agency (Indonesia)

    2014-03-24

    Radioisotope Pu-239/240 are alpha emitting nuclides important indicators of radioactive contamination of the marine environment. Global fallout is the main source of plutonium in the marine environment. There are very limited study on {sup 239/240}Pu in Indonesia coastal environments. The data of this radioisotopes is needed for baseline data of nuclear power plant (NPP) site candidates both in Bangka Island and Muria Peninsula. Bottom sediments play an important role in radioecological studies of the marine environment because a large proportion of radioactive substances entering the sea is adsorbed over time onto suspended particulate matter and deposited in sediments. Plutonium is particle reactive and deposited in marine sediment. Radioisotope {sup 239/240}Pu was determinated by alpha spectrometry after radiochemical procedure that was performed in both water and marine sediment from Bangka Island and Muria Peninsula. The sediment baseline of concentration {sup 239/240}Pu in Bangka Island and Muria Peninsula were range from 0.013 to 0.021 Bq.kg{sup −1} and 0.018 to 0.024 Bq.kg{sup −1} respectively. The water baseline concentration this isotope were range from 2.73 to 4.05 mBq.m{sup −3} and 2.98 to 4.50 mBq.m{sup −3}.

  19. Implementation of rafts of water spillage retention in the NPP. Almaraz and Trillo. Actions arising from the ITC-2; Implantacion de balsas de retencion de vertidos liquidos en las CCNN de Trillo y Almaraz. Actuaciones derivadas de la ITC-2

    Energy Technology Data Exchange (ETDEWEB)

    Font Hadinger, I.; Fernandez Morales, E.; Lopez Hernandez, A.

    2014-07-01

    In compliance with the ITC-2 of the Consejo de Seguridad Nuclear, have been built rafts for the containment of spills potentially radiologically contaminated, produced within the NPP site. Almaraz and Trillo. These discharges would be caused by certain mitigation activities to deploy in response to events beyond the design basis related to the potential loss of large areas (large fire mitigation and spraying of gaseous emissions) and in addition in the case of CNA, by a potential leak of the SFP (Spent Fuel Pool - pool of spent fuel). The basic idea is that any liquid discharge generated by the previous reasons within the Nuclear island may be content before your arrival to the outside of the plant through its network for the disposal of rainwater. Therefore, these rafts are the barrier last contention against an uncontrolled discharge of these waters to the environment. The same design ensures compliance with all the requirements, normative and practical, ensuring containment of aforementioned wastes potential capacity. (Author)

  20. Time changes in radiocesium concentration in aquatic systems affected by the Fukushima Daiichi NPP accident

    Science.gov (United States)

    Onda, Yuichi; Taniguchi, Keisuke; Kato, Hiroaki; Yoshimura, Kazuya; Wakiyama, Yoshifumi; Iwagami, Sho; Tsujimura, Maki; Sakaguchi, Aya; Yamamoto, Masatoshi

    2015-04-01

    Due to Fukushima Daiichi Nuclear Power Plant accident, radioactive materials including Cs-134 and Cs-137 were widely distributed in surrounded area. The radiocesiums have been transported in river networks. The monitoring started at 6 sites from June 2011. Subsequently, additional 24 monitoring sites were installed between October 2012 and January 2013. Flow and turbidity (for calculation of suspended sediment concentration) were measured at each site, while suspended sediments and river water were collected every one or half month to measure Cs-134 and Cs-137 activity concentrations by gamma spectrometry. Also detailed field monitoring has been condcuted in Yamakiya-district, Kawamata town, Fukushima prefecture. These monitoring includes, 1) Radiocesium wash-off from the runoff-erosion plot under different land use, 2) 2. Measurement of radiocesium transfer in forest environment, in association with hydrological pathways such as throughfall and overlandflow on hillslope, 3) Monitoring on radiocesium concentration in soil water, ground water, and spring water, 4)Monitoring of dissolved and particulate radiocesium concentration in river water, and stream water from the forested catchment, and 5)Measurement of radiocesium content in drain water and suspended sediment from paddy field. Our monitoring result demonstrated that the Cs-137 concentration in eroded sediment from the runoff-erosion plot has been almost constant for the past 3 years, however the Cs-137 concentration of suspended sediment from the forested catchment showed slight decrease through time. On the other hand, the suspended sediment from paddy field and those in river water from large catchments exhibited rapid decrease in Cs-137 concentration with time. The decreasing trend of Cs-137 concentration were fitted by the two-component exponential model, differences in decreasing rate of the model were compared and discussed among various land uses and catchment scales. Such analysis can provide

  1. Atucha II NPP full scope simulator modelling with the thermal hydraulic code TRAC{sub R}T

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, Pablo Rey; Ruiz, Jose Antonio; Rivero, Norberto, E-mail: prey@tecnatom.e, E-mail: jaruiz@tecnatom.e, E-mail: nrivero@tecnatom.e [Tecnatom S.A., Madrid (Spain)

    2011-07-01

    In February 2010 NA-SA (Nucleoelectrica Argentina S.A.) awarded Tecnatom the Atucha II full scope simulator project. NA-SA is a public company owner of the Argentinean nuclear power plants. Atucha II is due to enter in operation shortly. Atucha II NPP is a PHWR type plant cooled by the water of the Parana River and has the same design as the Atucha I unit, doubling its power capacity. Atucha II will produce 745 MWe utilizing heavy water as coolant and moderator, and natural uranium as fuel. A plant singular feature is the permanent core refueling. TRAC{sub R}T is the first real time thermal hydraulic six-equations code used in the training simulation industry for NSSS modeling. It is the result from adapting to real time the best estimate code TRACG. TRAC{sub R}T is based on first principle conservation equations for mass, energy and momentum for liquid and steam phases, with two phase flows under non homogeneous and non equilibrium conditions. At present, it has been successfully implemented in twelve full scope replica simulators in different training centers throughout the world. To ease the modeling task, TRAC{sub R}T includes a graphical pre-processing tool designed to optimize this process and alleviate the burden of entering alpha numerical data in an input file. (author)

  2. Seismic dynamic analysis of Heat Exchangers inside of the Auxiliary Buildings in AP1000{sup T}M NPP

    Energy Technology Data Exchange (ETDEWEB)

    Di Fonzo, M.; Aragon, J.; Moraleda, F.; Palazuelos, M.; San vicente, J. L.

    2011-07-01

    Seismic dynamic analysis was carried out for the Heat Exchangers (RNS-HR) located inside of the Auxiliary Building in AP 1000{sup T}M NPP. The main function of the RNS-HX is to provide shutdown reactor cooling. These equipment's are safety-related. So the seismic analysis was done using the methodology for Seismic Category I (SCI) structures. The most important topic is that the RNS-HX shall withstand the effects of the Safe Shutdown Earthquake (SSE) and maintain the specified design functions. for the analysis, two finite element models (FEM) were built in order to investigate the structural response of the couple system of building and equipment. The response spectra method was used. The floor response spectra (FRS) at the slab-wall connection were used as input Lateral seismic restrain was necessary to added in order to achieve the natural frequency of 33 Hz. The global structural response was obtained by means of the modal combination method indicated in the Regulatory Guide 1.92.

  3. A Procedure to Address the Fuel Rod Failures during LB-LOCA Transient in Atucha-2 NPP

    Directory of Open Access Journals (Sweden)

    Martina Adorni

    2011-01-01

    Full Text Available Depending on the specific event scenario and on the purpose of the analysis, the availability of calculation methods that are not implemented in the standard system thermal hydraulic codes might be required. This may imply the use of a dedicated fuel rod thermomechanical computer code. This paper provides an outline of the methodology for the analysis of the 2A LB-LOCA accident in Atucha-2 NPP and describes the procedure adopted for the use of the fuel rod thermomechanical code. The methodology implies the application of best estimate thermalhydraulics, neutron physics, and fuel pin performance computer codes, with the objective to verify the compliance with the specific acceptance criteria. The fuel pin performance code is applied with the main objective to evaluate the extent of cladding failures during the transient. The procedure consists of a deterministic calculation by the fuel performance code of each individual fuel rod during its lifetime and in the subsequent LB-LOCA transient calculations. The boundary and initial conditions are provided by core physics and three-dimensional neutron kinetic coupled thermal-hydraulic system codes calculations. The procedure is completed by the sensitivity calculations and the application of the probabilistic method, which are outside the scope of the current paper.

  4. Comparison on Heat of Hydration between Current Concrete for NPP and High Fluidity Concrete including Pozzolan Powders

    Energy Technology Data Exchange (ETDEWEB)

    Noh, Jea Myoung; Cho, Myung Sug [KEPCO Research Institute, Daejeon (Korea, Republic of)

    2010-10-15

    Nuclear power plant (NPP) concrete structures are exposed to many construction factors that lower the quality of concrete due to densely packed reinforcements and heat of hydration since they are mostly constructed with mass concrete. The concrete currently being used in Korean NPPs is mixed with Type I cement and fly ash. However, there is a demand to improve the performance of concrete with reduced heat of hydration and superior constructability. Many advantages such as improving workability and durability of concrete and decreasing heat of hydration are introduced by replacing cement with pozzolan binders. Therefore, the manufacturing possibility of high fluidity concrete should be investigated through applying multi-component powders blended with pozzolan binders to the concrete structure of NPPs, while the researches on properties, characteristic of hydration, durability and long-term behavior of high fluidity concrete using multi-component cement should be carried out. High fluidity concrete which is made using portland cement and pozzlonan powders such as fly ash and blast furnace slag has better properties on heat of hydration than the concrete currently in use for NPPs

  5. Analysis of Alternatives for Dismantling of the Equipment in Building 117/1 at Ignalina NPP - 13278

    Energy Technology Data Exchange (ETDEWEB)

    Poskas, Povilas; Simonis, Audrius [Lithuanian Energy Institute, Kaunas (Lithuania); Poskas, Gintautas [Lithuanian Energy Institute, Kaunas (Lithuania); Kaunas University of Technology, Kaunas (Lithuania)

    2013-07-01

    Ignalina NPP was operating two RBMK-1500 reactors which are under decommissioning now. In this paper dismantling alternatives of the equipment in Building 117/1 are analyzed. After situation analysis and collection of the primary information related to components' physical and radiological characteristics, location and other data, two different alternatives for dismantling of the equipment are formulated - the first (A1), when major components (vessels and pipes of Emergency Core Cooling System - ECCS) are segmented/halved in situ using flame cutting (oxy-acetylene) and the second one (A2), when these components are segmented/halved at the workshop using CAMC (Contact Arc Metal Cutting) technique. To select the preferable alternative MCDA method - AHP (Analytic Hierarchy Process) is applied. Hierarchical list of decision criteria, necessary for assessment of alternatives performance, are formulated. Quantitative decision criteria values for these alternatives are calculated using software DECRAD, which was developed by Lithuanian Energy Institute Nuclear engineering laboratory. While qualitative decision criteria are evaluated using expert judgment. Analysis results show that alternative A1 is better than alternative A2. (authors)

  6. Experience of radiation management in the removal work of RTD bypass lines at Kori NPP unit no. 3 and 4

    Energy Technology Data Exchange (ETDEWEB)

    Lee, K. H.; Kim, H. C.; Chang, D. C. [Hanil Nuclear Co., Ltd (HANIL), Seoul (Korea, Republic of)

    1999-07-01

    RTD bypass lines in reactor coolant system are critical system for providing the necessary temperature signal to the reactor control and protection system. In case of a leakage of RTD bypass lines, the plant shutdown and the over-exposure of maintenance workers could occur. So the removal of RTD bypass lines were performed for the reliable and safe operation of the plant and the installation work of direct temperature measurement instruments for the fast response temperature detection was also performed in the reactor coolant system. Through the ALARA experience at Kori NPP unit 3 and 4 (950 MWe, 3 loops), Youngkwang N/P and Ulchin N/P could also adopt this experience to reduce the radiation exposure. Then the collective radiation exposure, man-rem could be minimized and the radiation production could be also reduced satisfactorily. Actual collective radiation exposure was 38.7 man-rem for Kori unit no. 3 and 25.4 man-rem for the Kori unit no.4.. (author)

  7. The Use of System Codes in Scaling Studies: Relevant Techniques for Qualifying NPP Nodalizations for Particular Scenarios

    Directory of Open Access Journals (Sweden)

    V. Martinez-Quiroga

    2014-01-01

    Full Text Available System codes along with necessary nodalizations are valuable tools for thermal hydraulic safety analysis. Qualifying both codes and nodalizations is an essential step prior to their use in any significant study involving code calculations. Since most existing experimental data come from tests performed on the small scale, any qualification process must therefore address scale considerations. This paper describes the methodology developed at the Technical University of Catalonia in order to contribute to the qualification of Nuclear Power Plant nodalizations by means of scale disquisitions. The techniques that are presented include the so-called Kv-scaled calculation approach as well as the use of “hybrid nodalizations” and “scaled-up nodalizations.” These methods have revealed themselves to be very helpful in producing the required qualification and in promoting further improvements in nodalization. The paper explains both the concepts and the general guidelines of the method, while an accompanying paper will complete the presentation of the methodology as well as showing the results of the analysis of scaling discrepancies that appeared during the posttest simulations of PKL-LSTF counterpart tests performed on the PKL-III and ROSA-2 OECD/NEA Projects. Both articles together produce the complete description of the methodology that has been developed in the framework of the use of NPP nodalizations in the support to plant operation and control.

  8. Enhanced air dispersion modelling at a typical Chinese nuclear power plant site: Coupling RIMPUFF with two advanced diagnostic wind models.

    Science.gov (United States)

    Liu, Yun; Li, Hong; Sun, Sida; Fang, Sheng

    2017-09-01

    An enhanced air dispersion modelling scheme is proposed to cope with the building layout and complex terrain of a typical Chinese nuclear power plant (NPP) site. In this modelling, the California Meteorological Model (CALMET) and the Stationary Wind Fit and Turbulence (SWIFT) are coupled with the Risø Mesoscale PUFF model (RIMPUFF) for refined wind field calculation. The near-field diffusion coefficient correction scheme of the Atmospheric Relative Concentrations in the Building Wakes Computer Code (ARCON96) is adopted to characterize dispersion in building arrays. The proposed method is evaluated by a wind tunnel experiment that replicates the typical Chinese NPP site. For both wind speed/direction and air concentration, the enhanced modelling predictions agree well with the observations. The fraction of the predictions within a factor of 2 and 5 of observations exceeds 55% and 82% respectively in the building area and the complex terrain area. This demonstrates the feasibility of the new enhanced modelling for typical Chinese NPP sites. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Estimation of Typhoon Wind Hazard Curves for Nuclear Sites

    Energy Technology Data Exchange (ETDEWEB)

    Choun, Young-Sun; Kim, Min-Kyu [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    The intensity of such typhoons, which can influence the Korean Peninsula, is on an increasing trend owing to a rapid change of climate of the Northwest Pacific Ocean. Therefore, nuclear facilities should be prepared against future super-typhoons. Currently, the U.S. Nuclear Regulatory Commission requires that a new NPP should be designed to endure the design-basis hurricane wind speeds corresponding to an annual exceedance frequency of 10{sup -7} (return period of 10 million years). A typical technique used to estimate typhoon wind speeds is based on a sampling of the key parameters of typhoon wind models from the distribution functions fitting statistical distributions to the observation data. Thus, the estimated wind speeds for long return periods include an unavoidable uncertainty owing to a limited observation. This study estimates the typhoon wind speeds for nuclear sites using a Monte Carlo simulation, and derives wind hazard curves using a logic-tree framework to reduce the epistemic uncertainty. Typhoon wind speeds were estimated for different return periods through a Monte-Carlo simulation using the typhoon observation data, and the wind hazard curves were derived using a logic-tree framework for three nuclear sites. The hazard curves for the simulated and probable maximum winds were obtained. The mean hazard curves for the simulated and probable maximum winds can be used for the design and risk assessment of an NPP.

  10. FARE device operational characteristics of remote controlled fuelling machine at Wolsong NPP

    Energy Technology Data Exchange (ETDEWEB)

    Namgung, I. [Korea Power Engineering Co., Taejon (Korea, Republic of); Kim, Y. B.; Lee, S. K. [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

    2002-10-01

    There are 4 CANDU6 type reactors operating at Wolsong site. For fuelling operation of certain fuel channels (with flow less than 21.5 kg/s) a FARE (flow Assist Ram Extension) device is used. During the refuelling operation, two remote controlled F/Ms (Fuelling Machines) are attached to a designated fuel channel and carry out refuelling job. The upstream F/M inserts new fuel bundles into the fuel channel while the downstream F/M discharges spent fuel bundles. In order to assist fuelling operation of channels that has lower coolant flow rate, the FARE device is used instead of F/M C-ram to push the fuel bundle string. The FARE device is essentially a flow restricting element that produces enough drag force to push the fuel bundle string toward downstream F/M. Channels that require the use of FARE device for refuelling are located along the outside perimeter of reactor. This paper presents the FARE device design feature, steady state hydraulic and operational characteristics and behavior of the device when coupled with fuel bundle string during fuelling operation. The study showed that the steady state performance of Fare device meets the design objective that was confirmed by downstream F/M C-ram force to be positive.

  11. Monitoring of spatiotemporal patterns of Net and Gross Primary Productivity (NPP & GPP) and their ratios (NPP/GPP) derived from MODIS data: assessment natural drivers and their effects on NDVI anomalies in arid and semi-arid zones of Central Asia.

    Science.gov (United States)

    Aralova, Dildora; Jarihani, Ben; Khujanazarov, Timur; Toderich, Kristina; Gafurov, Dilshod; Gismatulina, Liliya

    2017-04-01

    Previous studies have shown that precipitation anomalies and raising of temperature trends were deteriorate affected on large-scale of vegetation surveys in Central Asia (CA). Nowadays, remote sensing techniques can provide estimation of Net and Gross Primary Productivity (NPP & GPP) for regional and global scales, and selected zones in CA (Kazakhstan, Kyrgyzstan, Tajikistan, Turkmenistan and Uzbekistan) dominated by C4 plants (biomes) what it reveals more accurately simulate C4 carbon. The estimation of NPP & GPP from source (MOD17A2/A3) would be beneficial to determine natural driver factors, whether on rangeland ecosystem is a carbon sink or source, such as a vast area of the selected zones incorporates exacerbate regional drought-risk factors nowadays. Generally, we have combined last available NPP & GPP (2000-2015) with 1 km resolution from MODIS, with investigation of long-term vegetation patterns under Normalized Difference Vegetation Indices (NDVI) with 8 km resolution from AVHRR-GIMMS 3g sources (2001-2015) within aim to estimate potential values of rangeland ecosystems. Interaction ratios of NPP/GPP are integrating more accurately describe carbon sink process under natural or anthropogenic factors, specifically last results of NDVI trends were described as decreasing trends due to climate anomalies, besides the eastern and northern parts of CA (mostly boreal forest zones) where accumulated or indicated of raising trends of NDVI in last three years (2012-2015). Results revealed that, in CA were averaged annually value NDVI ranges from 0.19-0.21; (Kyrgyzstan: 0.23-0.26; Kazakhstan: 0.21-0.24; Tajikistan: 0.19-0.21); and resting countries as low NDVI accumulated areas were Turkmenistan and Uzbekistan ranges 0.13-0.16; Comparing datasets of GPP given the response dynamic change structures of NDVI values and explicit carbon uptake (CO2) in arid ecosystems and average GPPyearlyin CA ranges 2.42 kg C/m2; including to Tajikistan, Uzbekistan (3.09 kg C/m2) and

  12. Investigation of low flow trip alarm of FARE channel at Wolsong NPP

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S. K.; Lee, S. G.; Son, S. M.; Lee, W. R.; Kim, T. R. [Korea Electric Power Research Institute, Taejon (Korea, Republic of); Lee, K. Y.; Hong, S. S. [Korea Hydro and Nuclear Power Co., Ltd., Gyeongju (Korea, Republic of); Namgung, I. [KOPEC, Taejon (Korea, Republic of)

    2003-10-01

    At Wolsong site in Korea, four CANDU6 type reactors are operating now. The CANDU type reactors require on power refuelling by the two remotely controlled F/Ms (Fuelling Machines). The refuelling operation is carried out along the coolant direction by the drag force of fuel bundles for most channels; however, for about 30% of channels the coolant flow is not sufficiently high enough to carry fuel bundles to the downstream. Therefore, a device, FARE(Flow Assist Ram Extension) device, is used to create an additional drag force to push the fuel bundles along the coolant flow. The FARE device has been causing the channel flow low phenomena of SDS1 (shut down system 1) channels due to more than excessive blockage of coolant flow. The flow rate change for the SDS1 channels is monitored on line for the coolant flow blockage of the channels. This has initiated the investigation of the FARE device behavior and the cause and remedy for the problem. The analysis revealed that the channel flow low occurs as the insertion of the FARE device into the active core flow and disappears as the removal of the FARE device from it. In order to eliminate the channel flow low phenomena, flow resistance by the FARE device should be reduced. The analysis has revealed that a too much relaxation of flow resistance would make the FARE device unable to push the fuel bundle string, and a too little relaxation would make the FARE device unable to eliminate the channel flow low phenomena. Suggested design changes include more flow holes in the tube.

  13. Comparing the impacts of the 2003 and 2005 fire seasons and the 2004 drought on NPP in the Iberian Peninsula

    Science.gov (United States)

    Bastos, Ana; Gouveia, Célia M.; Russo, Ana; Trigo, Ricardo M.

    2014-05-01

    Mediterranean ecosystems have evolved together with relatively frequent disturbances such as wildfires and long dry periods. However, in recent decades fire regimes have been changing due to widespread socio-economic factors (e.g. rural abandonment) as well as in response to climatic trends. In particular, drought have become more frequent and intense, a pattern that is expected to increase in future decades. Despite Mediterranean ecosystems being adapted to fire and drought occurrence, changes in the characteristics of disturbances may affect the ability of ecosystems to recover to their previous state. The years 2003, 2004 and 2005 were particularly severe for ecosystems in the Iberia Peninsula, as a devastating fire season (2003, ~574.000ha burnt) was followed by a very intense drought (2004/2005) that affected 2/3 of Iberian vegetation for more than 9 months. In 2005, a very destructive fire season was again registered, with ~727.000ha burnt. These disturbances have been shown to have a severe impact on vegetation phenology, as assessed by remote sensing imagery. One of the more relevant societal impacts of these disturbances is the decrease in net primary production (NPP) of vegetation, both for practical issues such as food production, fiber and fuel and for carbon balance assessments. This work focuses on 2003 and 2005 fire seasons in the Iberia Peninsula and in the 2004/05 drought. Burnt scars in all fire seasons were identified by cluster analysis; the area affected by the drought event of 2004/2005 was selected as the region where vegetative stress was observed for 9 or more months. Remote sensing allows large scale studies of the evolution of vegetation dynamics at relatively fine spatial resolution. We rely on satellite NDVI data from SPOT/VEGETATION (1km) to identify burnt scars and drought-stricken regions. To quantify the impacts in terms of carbon uptake by vegetation, the MOD17A2 (annual NPP) and MOD17A3 (monthly net photosynthesis, PsN) datasets

  14. Demonstrating S-NPP VIIRS Products with the Naval Research Laboratory R&D Websites

    Science.gov (United States)

    Kuciauskas, A. P.; Hawkins, J.; Solbrig, J.; Bankert, R.; Richardson, K.; Surratt, M.; Miller, S. D.; Kent, J.

    2014-12-01

    The Naval Research Laboratory, Marine Meteorology Division in Monterey, CA (NRL-MRY) has been developing and providing the global community with VIIRS-derived state of the art image products on three operational websites: · NexSat: www.nrlmry.navy.mil/NEXSAT.html · VIIRS Page: www.nrlmry.navy.mil/VIIRS.html · Tropical Cyclone Page: www.nrlmry.navy.mil/TC.html These user-friendly websites are accessed by the global public with a daily average of 250,000 and 310,000 web hits for NexSat and Tropical Cyclone websites, respectively. Users consist of operational, research, scientific field campaigns, academia, and weather enthusiasts. The websites also contain ancillary products from 5 geostationary and 27 low earth orbiting sensors, ranging from visible through microwave channels. NRL-MRY also leverages the NRL global and regional numerical weather prediction (NWP) models for assessing cloud top measurements and synoptic overlays. With collaborations at CIMSS' Direct Readout site along with the AFWA IDPS-FNMOC and NOAA IDPS portals, a robust component to our websites are product latencies that typically satisfy operational time constraints necessary for planning purposes. Given these resources, NRL-MRY acquires ~2TBytes of data and produces 100,000 image products on a daily basis. In partnership with the COMET program, our product tutorials contain simple and graphically enhanced descriptions that accommodate users ranging from basic to advanced understanding of satellite meteorology. This presentation will provide an overview of our website functionality: animations, co-registered formats, and Google Earth viewing. Through imagery, we will also demonstrate the superiority of VIIRS against its heritage sensor counterparts. A focal aspect will be the demonstration of the VIIRS Day Night Band (DNB) in detecting nighttime features such as wildfires, volcanic ash, Arctic sea ice, and tropical cyclones. We also plan to illustrate how NexSat and VIIRS websites demonstrate

  15. A Conceptual Design of Light-weighted Mobile Robot for the Integrity of SG Tubes in NPP

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Yong Chil; Jeong, Kyung Min; Shin, Ho Chul; Lee, Sung Uk; Cho, Jae Wan; Choi, Young Soo; Kim, Seung Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Shin, Chun Sup; Park, Ki Tae [Korea Plant Serviceand Engineering, Busan (Korea, Republic of)

    2010-10-15

    Steam generators (SG) are among the most critical components of pressurized water Nuclear Power Plants (NPP). SG tubes must provide a reliable pressure boundary between the primary and secondary cooling water. It is because that any leakage from tube defects could result in the release of radioactivity to the environment. Thus degradations of steam generators tubes should be monitored and inspected periodically under nuclear regulatory. In-service inspections of SG tubes are carried out using eddy current test (ECT) and the defected tubes are usually plugged. Because the radioactivity in the internal of SG chambers limits free access of human worker, remote manipulators are required. In South Korea, Manipulators such as the Zetec SM series and the Westinghouse ROSA series have been used. Such manipulators are rigidly mounted to manways or tube sheets of SG. Confusions for the inspected tubes may occur from deflection of the manipulators. To reduce the deflections of the manipulators for covering the large working areas of tube sheets, sufficient rigidity is required and it leads to the increase of the weight. Such weight increase results in some difficulties for handling and more radiation exposure of human workers. Recently light-weighed mobile robots have been introduced by Westinghouse and Zetec. The robots can move keeping in contact with the tube sheets using devices which are commonly called cam-locks. They are easier to handle and provide no confusion for the position of the inspected tubes. But when the clamping forces are loosed accidently, they can be fall down and light repair works can be performed. This paper provides the design results for a light weighted mobile robot which is recently being developed in cooperation of our institutes

  16. Time changes in radiocesium wash-off from various land uses after the Fukushima Daiichi NPP accident

    Science.gov (United States)

    Onda, Yuichi; Kato, Hiroaki; Yoshimura, Kazuya; Tsujimura, Maki; Wakiyama, Yoshifumi; Taniguchi, Keisuke; Sakaguchi, Aya; Yamamoto, Masayoshi

    2014-05-01

    A number of studies have been conducted to monitor and model the time series change of radiocesium transfer through aquatic systems after significant fallout, especially from the Chernobyl disaster. However, no data is available for the temporal changes of radiocesium concentration in environmental materials such as soil and water after the Fukushima Daiichi nuclear power plant accident. Our research team has been monitoring the environmental consequences of radioactive contamination just after the Fukushima Daiichi NPP accident in Yamakiya-district, Kawamata town, Fukushima prefecture. Research items are listed below. 1. Radiocesium wash-off from the runoff-erosion plot under different land use. 2. Measurement of radiocesium transfer in forest environment, in association with hydrological pathways such as throughfall and overlandflow on hillslope. 3. Monitoring on radiocesium concentration in soil water, ground water, and spring water. 4. Monitoring of dissolved and particulate radiocesium concentration in river water, and stream water from the forested catchment. 5.Measurement of radiocesium content in drain water and suspended sediment from paddy field. Our monitoring result demonstrated that the Cs-137 concentration in eroded sediment from the runoff-erosion plot has been almost constant for the past 3 years, however the Cs-137 concentration of suspended sediment from the forested catchment showed slight decrease through time. On the other hand, the suspended sediment from paddy field and those in river water from large catchments exhibited rapid decrease in Cs-137 concentration with time. The decreasing trend of Cs-137 concentration were fitted by the two-component exponential model, differences in decreasing rate of the model were compared and discussed among various land uses and catchment scales. Such analysis can provide important insights into the future prediction of the radiocesium wash-off from catchments with different land uses.

  17. Seismic response analysis of a piping system subjected to multiple support excitations in a base isolated NPP building

    Energy Technology Data Exchange (ETDEWEB)

    Surh, Han-Bum [School of Mechanical Engineering, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of); Korea Atomic Energy Research Institute, 989-111 Daedeok-daero, Yuseong-gu, Daejeon 305-353 (Korea, Republic of); Ryu, Tae-Young; Park, Jin-Sung [School of Mechanical Engineering, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of); Ahn, Eun-Woo; Choi, Chul-Sun [Korea Electric Power Corporation Engineering & Construction Company, Inc., 2354 Yonggu-daero, Giheung-gu, Yongin 446-713 (Korea, Republic of); Koo, Ja Choon [School of Mechanical Engineering, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of); Choi, Jae-Boong [School of Mechanical Engineering, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of); SKKU Advanced Institute of Nanotechnology, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of); Kim, Moon Ki, E-mail: mkkim@me.skku.ac.kr [School of Mechanical Engineering, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of); SKKU Advanced Institute of Nanotechnology, Sungkyunkwan University, 2066 Seobu-ro, Jangan-gu, Suwon 440-746 (Korea, Republic of)

    2015-10-15

    Highlights: • Piping system in the APR 1400 NPP with a base isolation design is studied. • Seismic response of piping system in base isolated building are investigated. • Stress classification method is examined for piping subjected to seismic loading. • Primary stress of piping is reduced due to base isolation design. • Substantial secondary stress is observed in the main steam piping. - Abstract: In this study, the stress response of the piping system in the advanced power reactor 1400 (APR 1400) with a base isolation design subjected to seismic loading is addressed. The piping system located between the auxiliary building with base isolation and the turbine building with a fixed base is considered since it can be subjected to substantial relative support movement during seismic events. First, the support responses with respect to the base characteristic are investigated to perform seismic analysis for multiple support excitations. Finite element analyses are performed to predict the piping stress response through various analysis methods such as the response spectrum, seismic support movement and time history method. To separately evaluate the inertial effect and support movement effect on the piping stress, the stress is decomposed into a primary and secondary stress using the proposed method. Finally, influences of the base isolation design on the piping system in the APR 1400 are addressed. The primary stress based on the inertial loading is effectively reduced in a base isolation design, whereas a considerable amount of secondary stress is generated in the piping system connecting a base isolated building with a fixed base building. It is also confirmed that both the response spectrum analysis and seismic support movement analysis provide more conservative estimations of the piping stress compared to the time history analysis.

  18. Real-time mapping of combustion sources using Suomi NPP satellite VIIRS and CrIMSS data

    Science.gov (United States)

    Zhizhin, M.; Elvidge, C.; Baugh, K.; Hsu, F.

    2012-12-01

    Night-time images from the Suomi NPP satellite VIIRS scanning radiometer in visible and infrared spectral bands provide invaluable data for real-time detection of natural and technological combustion sources on the surface of the Earth, such as forest fires, gas flares, steel mills or active volcanoes. Point sources detected at night in 1.6 micron near-infrared M10 channel are most likely to be large fires or gas flares. Their temperature and radiative power can be estimated by simultaneous fitting of two Planck black-body spectral curves to the observed radiances of all VIIRS infrared M-channels, one curve for the temperature and power of the combustion, another for the background. VIIRS instrument is sensitive to the IR sources with temperature range from 800 to 2000 degrees K. This method can discriminate low temperature sources such as volcanoes and forest fires from the high temperature gas flares with 300 m average location error. Global real-time mapping of the IR sources on the Earth requires correction of the M-channels for bow tie effect, atmospheric correction and filtering of the false detections resulting from sensor bombardment by the cosmic rays, especially at the aurora rings and at the South Atlantic anomaly. MODTRAN atmospheric radiative transfer mode is used with temperature and moisture profiles provided by the CrIMSS onboard sensor suite. False detections can be removed by correlating of the observed bright spots in M10 channel with other infrared and the visible day-night band. After geometry correction and denoising, the IR point sources are mapped on Google Earth and listed in a table. NOAA NGDC provides global daily detection products for thousands of IR sources as KML vector maps and as CSV tables.

  19. Evolving Synergy between UV and VIS instruments for Aerosol Remote Sensing- Implications for Suomi NPP and Future Instruments

    Science.gov (United States)

    Bhartia, P. K.; Torres, O.

    2014-12-01

    Satellite remote sensing of aerosols started in 1979 using data from the AVHRR series of instruments on NOAA polar orbiters. Though limited to the oceans only, AVHRR clearly showed the basic latitudinal, longitudinal, and seasonal patterns in global aerosol fields that have been confirmed by more advanced instruments. In the early 90s a surprising discovery was made that UV instruments, such as TOMS, designed primarily to measure atmospheric ozone, can enhance this information by tracking the aerosol absorption signal of smoke and dust plumes over both land and water, as well as over bright surfaces covered by low level clouds, snow and ice. While more recent VIS/IR mapping instruments, such as SeaWIFS, MISR, MODIS, and VIIRS have greatly enhanced aerosol remote sensing capability compared to AVHRR, similar improvements have been made in UV remote sensing of aerosols, particularly with the launch of OMI on Aura in 2004. More recently, several successful approaches have been developed to combine MODIS and OMI data to estimate aerosol single scattering albedo over cloud-free areas and aerosol optical thickness over cloudy areas. I will discuss how these advanced techniques could be applied to combine VIIRS and OMPS data from Suomi NPP and what improvements are planned for JPSS-1. These techniques could also be applied to process data from the EPIC instrument, scheduled to be launched on the DSCOVR satellite next year. It will be located 1.5 million km from the Earth along the Sun-Earth axis at the first Lagrange point. Several other UV/VIS instruments are planned to be launched in LEO and GEO orbits in this decade that can take advantage of this synergy.

  20. Site Features

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset consists of various site features from multiple Superfund sites in U.S. EPA Region 8. These data were acquired from multiple sources at different times...

  1. Widespread use of best estimate codes in Atucha II NPP simulator; Uso extendido de codigos Best estimate en el sumulador de Atucha II

    Energy Technology Data Exchange (ETDEWEB)

    Dieguez, G. L.; Garde, D.; Ruiz, J. A.; Exposito, A.

    2016-08-01

    Since the best estimate codes were first used in training simulators in the 90s, the computing power has increased dramatically and today the computing cost has become insignificant in these project. This allows using state of the art process simulation codes, both on detailed design models and also on the simulation of all the potentially biphasic plant systems. The Atucha II NPP simulator sets a good example. The quality of the results has enabled to proactively support the plant start-up, verifying the planned maneuvers and featuring reference behavior. It has also helped to understand unexpected phenomena and optimize the control loops. (Author)

  2. RADIATION RISKS ASSESSMENT DUE TO CONSUMPTION OF THE FAR EAST FOOD FISH AFTER THE ACCIDENT ON “FUKUSHIMA-1” NPP

    OpenAIRE

    G. G. Onishсhenko; V. S. Repin; I. K. Romanovich

    2015-01-01

    The paper presents a review of the data on radioactivity releases to thePacific Oceanlevels after the Fukushima NPP accident. It is shown that the potential risk of of the seafood contamination with the long-living radionuclides 134Cs and 137Cs, which continue to be released to the Pacific Ocean up to the present time. Contribution of 90Sr to the total radioactive contamination does not exceed 3%. Review of the literature data on the modeling of radioactivity spot diffusion showed that due to...

  3. NPP accident scenario. Which emergency measures are planned in Switzerland?; Szenario KKW-Unfall. Welche Notfallschutzmassnahmen sind in der Schweiz geplant?

    Energy Technology Data Exchange (ETDEWEB)

    Flury, Christoph [Bundesamt fuer Bevoelkerungsschutz (BABS), Bern (Switzerland). Eidgenoessisches Departement fuer Verteidigung Bevoelkerungsschutz und Sport (VBS)

    2016-07-01

    As a consequence of the reactor accident in Fukushima the Swiss government has ordered an extensive analysis of emergency planning in case of a NPP accident Switzerland. A special working group has analyzed the possible improvements of Swiss emergency planning based on the experiences in Japan. Under the special direction of the Bundesamt fuer Bevoelkerungsschutz (BABS) the agreed improvements were integrated into the emergency concept. The reference scenarios have been re-assessed and the zone concept adapted. The emergency measures include shelter-type rooms (basement or window-less rooms), the preventive distribution of iodine pills, measures concerning agriculture, aquatic systems, preventive evacuation, traffic regulations, and delayed evacuation.

  4. Post-launch Radiometric and Spectral Calibration Assessment of NPP/CrIS by Comparing CrIS with VIIRS, AIRS, and IASI

    OpenAIRE

    Wang, Likun; Han, Yong; Tremblay, Denis; Goldberg, Mitch

    2012-01-01

    The Cross-track Infrared Sounder (CrIS) on the newly-launched Suomi National Polar-orbiting Partnership (Suomi NPP) and future Joint Polar Satellite System (JPSS) is a Fourier transform spectrometer that provides soundings of the atmosphere with 1305 spectral channels, over 3 wavelength ranges: LWIR (9.14 - 15.38um); MWIR (5.71 - 8.26um); and SWIR (3.92 - 4.64 um). An accurate spectral and radiometric calibration is fundamental for CrIS radiance Sensor Data Records (SDRs). In this study, thro...

  5. Ultrasonic findings in the NPP Beznau. Report on the planned further procedure of the licensee; Ultraschallbefunde des Kernkraftwerks Beznau. Stellungnahme zum geplanten weiteren Vorgehen des Betreibers

    Energy Technology Data Exchange (ETDEWEB)

    Mohr, Simone; Pistner, Christoph

    2016-03-15

    Due to the ultrasonic findings in the reactor pressure vessel of NPP Beznau-1 in 2015 the licensee had to provide a new structural integrity analysis based on the changed material properties. The authors discuss the interpretation of the findings in Beznau with in relation to similar findings in the Belgian NPPS Doel-3 and Tihange-2. A doubtless metallurgical characterization of the irregularities in the RPV wall as not possible based on ultrasonic testing only. Destructive testing of samples from the reactor pressure vessel is also not possible since no original material bearing irregularities is available.

  6. Improved Ozone and Carbon Monoxide Profile Retrievals Using Multispectral Measurements from NASA "A Train", NPP, and TROPOMI Satellites

    Science.gov (United States)

    Fu, D.; Bowman, K. W.; Kulawik, S. S.; Miyazaki, K.; Worden, J. R.; Worden, H. M.; Livesey, N. J.; Payne, V.; Luo, M.; Natraj, V.; Veefkind, P.; Aben, I.; Landgraf, J.; Flynn, L. E.; Han, Y.; Liu, X.; Strow, L. L.; Kuai, L.

    2015-12-01

    Tropospheric ozone is at the juncture of air quality and climate. Ozone directly impacts human and plant health, and directly forces the climate system through absorption of thermal radiation. Carbon monoxide is a chemical precursor of greenhouse gases CO2 and tropospheric O3, and is also an ideal tracer of transport processes due to its medium life time (weeks to months). The Aqua-AIRS and Aura-OMI instruments in the NASA "A-Train", CrIS and OMPS instruments on the NOAA Suomi-NPP, IASI and GOME-2 on METOP and TROPOMI aboard the Sentinel 5 precursor (S5p) have the potential to provide the synoptic chemical and dynamical context for ozone necessary to quantify long-range transport at global scales and to provide an anchor to the near-term constellation of geostationary sounders: NASA TEMPO, ESA Sentinel 4, and the Korean GEMS. We introduce the JPL MUlti-SpEctral, MUlti-SpEcies, MUlti-SatEllite (MUSES) retrieval algorithm, which ingests panspectral observations across multiple platforms in a non-linear optimal estimation framework. MUSES incorporates advances in remote sensing science developed during the EOS-Aura era including rigorous error analysis diagnostics and observation operators needed for trend analysis, climate model evaluation, and data assimilation. Its performance has been demonstrated through prototype studies for multi-satellite missions (AIRS, CrIS, TROPOMI, TES, OMI, and OMPS). We present joint tropospheric ozone retrievals from AIRS/OMI and CrIS/OMPS over global scales, and demonstrate the potential of joint carbon monoxide profiles from TROPOMI/CrIS. These results indicate that ozone can be retrieved with ~2 degrees of freedom for signal (dofs) in the troposphere, which is similar to TES. Joint CO profiles have dofs similar to the MOPITT multispectral retrieval but with higher spatial resolution and coverage. Consequently, multispectral retrievals show promise in providing continuity with NASA EOS observations and pave the way towards a new

  7. The Thirty Years’ Results of Radiation Hygienic Monitoring of Tula Region territories contaminated due to the Chernobyl NPP accident

    Directory of Open Access Journals (Sweden)

    V. V. Boldyreva

    2016-01-01

    Full Text Available Over 50% of Tula Region areas were contaminated after the Chernobyl NPP accident. The article provides the thirty years’ results of radiation hygienic monitoring of the Chernobyl accidental fallout - affected areas in Tula Region. The radiation situation is assessed at the initial accidental period and at the current stage. The initial levels of gamma - radiation dose intensity (up to 35 mcSv/hr are identified for the period of the “iodine” hazard along with the tabular data on the dose intensity relative stabilization by the beginning of August 1986 due to iodine-131 decay. The information is presented regarding iodine-131 tentative maximum permissible level exceedance in the dairy products of the two most contaminated regional areas - Plavskoye and Arsenievskoye. The article also provides the laboratory data on the total beta - activity in the foodstuffs in 1986-1987 and cesium-137 maximum permissible level exceedence in 1986. The radionuclide maximum permissible level exceedances in foodstuffs were registered only in 1986 due to the plants surface contamination whereas in the forest mushrooms those exceedances were repeatedly found until 2004. The black earths and grey forest soils had a benign impact upon the intensity of the radionuclide transfer into plants which resulted in the formation of internal radiation doses.At the current stage, the content of cesium-137 and strontium- 90 in the foodstuffs can only be quantified by a radiochemical method. The table covers all the districts within the boundaries of radiation contaminated zones. The radiochemical studies indicate the main dose - forming products. The article contains the table of internal and external radiation doses of the population in Plavsk town over 1986-1990 and displays the factors impacting population’s internal and external exposure. The Chernobyl - affected exposure dose of the population is mostly attributed to the external radiation and, for over twenty years, it

  8. Analysis of the EU stress test results for the NPP Fessenheim and Beznau. Pt. 2. Beznau; Analyse der Ergebnisse des EU-Stresstest der Kernkraftwerke Fessenheim und Beznau. T. 2. Beznau

    Energy Technology Data Exchange (ETDEWEB)

    Brettner, Mathias [Physikerbuero Bremen (Germany); Pistner, Christoph; Kurth, Stephan [Oeko-Institut e.V. - Institut fuer Angewandte Oekologie, Darmstadt (Germany)

    2012-10-11

    As a consequence of the reactor accidents in Fukushima Daiichi the safety status of nuclear power plants was performed by national and international surveillance processes. In Germany the safety status of the NPP was testes by the reactor safety commission, an expert commission of Baden-Wuerttemberg, an expert commission of Bavaria and the EU stress test. The evaluation criteria based on national and international surveillance processes were focused on earthquakes, flooding and postulated failures of the electricity supply - station blackout and long-lasting failure of the emergency power supply. In Germany extended requirements included the electricity supply and the emergency cooling water supply. The authors identify essential safety relevant systems in the NPP Beznau, including technical systems, energy supply, plant-internal emergency measures, and discuss specific Swiss requirements. The evaluation of the EU stress test for the NPP Fessenheim covers the issues earthquake, flooding, spent fuel element pool, electricity supply, cooling water supply and identification of further safety relevant deficiencies.

  9. Analysis of the EU stress test results for the NPP Fessenheim and Beznau. Pt. 1. Fessenheim; Analyse der Ergebnisse des EU-Stresstest der Kernkraftwerke Fessenheim und Beznau. T. 1. Fessenheim

    Energy Technology Data Exchange (ETDEWEB)

    Pistner, Christoph; Kueppers, Christian; Kurth, Stephan; Mohr, Simone [Oeko-Institut e.V. - Institut fuer Angewandte Oekologie, Darmstadt (Germany); Brettner, Mathias [Physikerbuero Bremen (Germany)

    2012-10-11

    As a consequence of the reactor accidents in Fukushima Daiichi the safety status of nuclear power plants was performed by national and international surveillance processes. In Germany the safety status of the NPP was testes by the reactor safety commission, an expert commission of Baden-Wuerttemberg, an expert commission of Bavaria and the EU stress test. The evaluation criteria based on national and international surveillance processes were focused on earthquakes, flooding and postulated failures of the electricity supply - station blackout and long-lasting failure of the emergency power supply. In Germany extended requirements included the electricity supply and the emergency cooling water supply. The authors identify essential safety relevant systems in the NPP Fessenheim. The evaluation of the EU stress test for the NPP Fessenheim covers the issues earthquake, flooding, spent fuel element pool, electricity supply, cooling water supply and identification of further safety relevant deficiencies.

  10. Seismic qualification tests of fans of the NPP of Laguna Verde U-1 and U-2; Pruebas de calificacion sismica de ventiladores de la Central Laguna Verde U1 and U2

    Energy Technology Data Exchange (ETDEWEB)

    Jarvio C, G.; Garcia H, E. E.; Arguelles F, R.; Vela H, A. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Naranjo U, J. L., E-mail: gilberto.jarvio@inin.gob.mx [Comision Federal de Electricidad, Gerencia de Centrales Nucleoelectricas, Subgerencia de Ingenieria, Carretera Veracruz-Medellin Km 7.5, Dos Bocas, Veracruz (Mexico)

    2013-10-15

    This work presents the results of the seismic qualification tests applied to the fans that will be installed in the control panels of the three divisions of the diesel generators of the nuclear power plant (NPP) of Laguna Verde, Unit-1 and Unit-2. This seismic qualification process of the fans was carried out using two specimens that were tested in the seismic table (vibrating) of the Engineering Institute of Universidad Nacional Autonoma de Mexico (UNAM), in accordance with the requirements of the standard IEEE 344-1975, to satisfy the established requirements of seismic qualification in the technical specifications and normative documents required by the nuclear standards, in order to demonstrate its application in the diesel generators Divisions I, II and III of the NPP. The seismic qualification tests were developed on specimens that were retired of the NPP of Laguna Verde recently with a service life of 7.75 years. (Author)

  11. Development of tools to manage the operational monitoring and pre-design of the NPP-LV cycle; Desarrollo de herramientas para administrar el seguimiento operativo y el pre-diseno del ciclo de la CLV

    Energy Technology Data Exchange (ETDEWEB)

    Perusquia, R.; Arredondo S, C.; Hernandez M, J. L.; Montes T, J. L.; Castillo M, A.; Ortiz S, J. J., E-mail: raul.perusquia@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2015-09-15

    This paper presents the development of tools to facilitate the management so much, the operational monitoring of boiling water reactors (BWR) of the nuclear power plant of Laguna Verde (NPP-LV) through independent codes, and how to carry out the static calculations corresponding to process of optimized pre-design of the reference cycle next to current cycle. The progress and preliminary results obtained with the program SACal, developed at Instituto Nacional de Investigaciones Nucleares (ININ), central tool to achieve provide a management platform of the operational monitoring and pre-design of NPP-LV cycle are also described. The reached preliminary advances directed to get an Analysis center and automated design of fuel assembly cells are also presented, which together with centers or similar modules related with the fuel reloads form the key part to meet the targets set for the realization of a Management Platform of Nuclear Fuel of the NPP-LV. (Author)

  12. Experience gained from the development and results from tests of the equipment of the Kalinin NPP Unit 4 regeneration and intermediate steam separation and reheating system

    Science.gov (United States)

    Trifonov, N. N.; Sukhorukov, Yu. G.; Ermolov, V. F.; Svyatkin, F. A.; Nikolaenkova, E. K.; Sintsova, T. G.; Grigor'eva, E. B.; Esin, S. B.; Ukhanova, M. G.; Golubev, E. A.; Bik, S. P.; Tren'kin, V. B.

    2014-06-01

    The equipment of the Kalinin NPP Unit 4 regeneration, intermediate separation, and steam reheating (ISSR) systems is described and the results of their static and dynamic tests are presented. It was shown from an analysis of test results that the equipment of the regeneration and ISSR systems produce the design thermal and hydraulic characteristics in static and dynamic modes of its operation. Specialists of the Central boiler-Turbine Institute Research and Production Association have developed procedures and computer programs for calculating the system of direct-contact horizontal low-pressure heaters (connected according to the gravity circuit arrangement jointly with the second-stage electrically-driven condensate pumps) and the ISSR system, the results of which are in satisfactory agreement with experimental data. The drawbacks of the layout solutions due to which cavitation failure of the pumps may occur are considered. Technical solutions aimed at securing stable operation of the equipment of regeneration and ISSR systems are proposed. The process arrangement for heating the chamber-type high-pressure heaters adopted at the Kalinin NPP is analyzed. The version of this circuit developed at the Central Boiler-Turbine Institute Research and Production Association that allows the heating rate equal to 1°C/min to be obtained is proposed.

  13. ACCIDENT AT «FUKUSHIMA-I» NPP: FIRST RESULTS OF EMERGENCY RESPONSE. REPORT 1: GENERAL INFORMATION ABOUT THE ACCIDENT AND RADIATION SITUATION

    Directory of Open Access Journals (Sweden)

    G. G. Onischenko

    2011-01-01

    Full Text Available The article presents preliminary assessment of the accident scale, level of its radiation effect on the population and response of national authorities of various countries for the population radiation protection provisions. High levels of the environmental radioactive contamination demanded the application of complex measures for the radiation protection of the population from adjacent territories of Japan. Radionuclides from the region of damaged NPP can get to the other countries by means of the long-distant air and sea water mass transfer. Specific activity of cesium radionuclides in the sea biota can reach the level recommended by the Codex Alimentarius Commission as the safe level for the international trade or exceed it. Significant radioactive contamination of the territories of other countries resulting from the «Fukushima-I» NPP accident did not occur. Many world countries applied measures of the Japanese food products import control on the base of the radiation monitoring data. These prohibitions are consequently remitted following the radiation situation improvement.

  14. Numerical simulation of the detection of crack in reinforced concrete structures of NPP due to expansion of reinforcing corrosive products using Impact-Echo method

    Directory of Open Access Journals (Sweden)

    Morávka Š.

    2008-12-01

    Full Text Available Nuclear energy boom is starting nowadays. But also current nuclear power plants (NPP are duty to certify their security for regular renewal of their operating licenses. NPP security can be significantly affected by defects of large amount of ageing reinforced concrete structures. Advanced Impact-Echo method seams to be very hopeful to cooperate at performing in-service inspections such structures. Just these in-service inspections are included in the first priority group of specific technical issues according to the recommendations of OECD-Nuclear Energy Agency, Commission on Safety of Nuclear Installation in the field of ageing management.This paper continues of extensive project dealing with Impact-Echo method application. It will present method description and main results of numerical modeling of detection and localization of crack caused by corrosive product expansion. Steel reinforcing rods are subjected to corrosion due to diffusion of corrosive agents from structure surface. Corrosive products have up to 7-times larger volume than pure steel. Raised strain can cad lead up to concrete failure and crack development. We investigate whether it is possible to detect these growing cracks by Impact-Echo method in time.Experimental verification of our numerical predictions is prepared on Civil Faculty in Brno.

  15. Structure of comorbid diseases in patients with non-alcoholic fatty liver disease, exposed to ionizing radiation as a result of the Chornobyl NPP accident.

    Science.gov (United States)

    Gasanova, O V; Sarkisova, E O; Ovsyannikova, L M; Chumak, A A; Nosach, O V; Nezgovorova, G A; Gromadska, V M

    2014-09-01

    Objective - to study of the structure of comorbid diseases in patients with nonalcoholic fatty liver disease (NAFLD), exposed to ionizing radiation due to the Chornobyl accident, and in the groups of comparison. Materials and methods. Array of surveyed males was divided into 4 groups: the main group - 136 patients with NAFLD affected by the Chornobyl NPP accident, the first comparison group (І CG) - 28 affected by Chornobyl NPP accident without liver disease, the second comparison group (II CG) - 50 patients with NAFLD not exposed to factors of the Chornobyl disaster, and the third comparison group (III CG) - 16 unexposed persons without liver disease. Results. A significant amount of co-morbid pathology was found in all studied groups but III CG: at the average from 4.1 ± 0.4 diseases in II CG to 5.2 ± 0.2 in the main group of patients (p diseases were established. The most common disorders were cardiovascular and cerebrovascular and endocrine diseases. Structure of comorbid pathology in NAFLD in the main study group differed from this in II CG by a significantly greater frequency of detection of cerebrovascular diseases (73.5 and 56 %, p diseases (47.1 %) were more frequent than in II GC: correspondingly 58 % (p diseases and nosological structure. The most common disorders were cardiovascular, cerebrovascular, and endocrine diseases. Significantly higher incidence of essential hypertension, vascular encephalopathy, and thyroid disease was determined.

  16. Site assessment

    DEFF Research Database (Denmark)

    Vesth, Allan; Gómez Arranz, Paula

    This report describes the site assessment of given position in a given site, for a wind turbine with a well-defined hub height and rotor diameter. The analysis is carried out in accordance to IEC 61400-12-1 [1], and both an obstacle assessment and a terrain assessment are performed....

  17. Site assessment

    DEFF Research Database (Denmark)

    Villanueva, Héctor; Gómez Arranz, Paula

    This report describes the site assessment of given position in a given site, for a wind turbine with a well-defined hub height and rotor diameter. The analysis is carried out in accordance to IEC 61400-12-1 [1], and both an obstacle assessment and a terrain assessment are performed....

  18. Operational Readiness Verification, Phase 3. A Field Study at a Swedish NPP during a Productive Outage (Safety-train Outage)

    Energy Technology Data Exchange (ETDEWEB)

    Hollnagel, Erik [Linkoeping Univ. (Sweden). Dept. of Computer and Information Science; Gauthereau, Vincent; Persson, Bodil [Linkoeping Univ. (Sweden). Dept. of Industrial Engineering

    2004-01-01

    This report describes the results from Phase III of a study on Operational Readiness Verification (ORV) that was carried out from December 2002 to November 2003. The work comprised a field study of ORV activities at a Swedish NPP during a planned productive outage, which allowed empirical work to be conducted in an appropriate environment with good accessibility to technical staff. One conclusion from Phase I of this project was the need to look more closely at the differences between three levels or types of tests that occur in ORV: object (component) test, system level test and (safety) function test, and to analyse the different steps of testing in order to understand the nontrivial relations between tests and safety. A second conclusion was the need to take a closer look at the organisation's ability to improvise in the sense of adjusting pre-defined plans to the actual conditions under which they are to be carried out. Phase II of the project found that although all three types of test occurred, they were rather used according to need rather than to a predefined arrangement or procedure. The complexity of ORV could be understood and described by using the concepts of Community of Practice, embedding, and Efficiency-Thoroughness Trade-Off. In addition, organisation and the different communities of practice improvise by adjusting pre-defined plans or work orders to the existing conditions. Such improvisations take place both on the levels of individual actions, on the level of communities of practice, and on the organisational level. The ability to improvise is practically a necessity for work to be carried out, but is also a potential risk. Phase III of the project studied how tasks are adapted relative to the different types of embedding and the degree of correspondence between nominal and actual ORV. It also looked further at the different Communities of Practice that are part of maintenance and ORV, focusing on the coordination and communication between

  19. Radionuclides contribution of emergency NPP 'Fukushima-1' in the contamination of the Sakhalin Island soils

    Energy Technology Data Exchange (ETDEWEB)

    Molchanova, I.V.; Mikhailovskaya, L.N.; Pozolotina, V.N.; Antonova, E.V. [Institute of Plant and Animal Ecology, Ural Division, Russian Academy of Sciences (Russian Federation); Zhuravlev, Yu.N.; Timofeeva, Ya.O.; Burdukovskii, M.L. [Institute of Biology and Soil Science, Far East Branch, Russian Academy of Sciences (Russian Federation)

    2014-07-01

    The Russian Far East is of special interest for radioecology because of the Fukushima-1 NPP accident occurred in close vicinity of this region. We evaluated the contents of man-made radionuclides, heavy metals and the contribution of the accident fallouts of {sup 137}Cs into contamination of the soil-plant covers in the coastal zone of the Myravyov-Amyrsky Peninsula and the territory of the Island Sakhalin. This contribution was assessed with use specific activity of {sup 134}Cs and ratio {sup 134}Cs/{sup 137}Cs. The generally-accepted methods of the radioecological investigations were used for sampling. The leaf fall, forest litters, and soils were sampling from the profile cuts of layer by layer, up to 20 cm. The artificial radionuclides ({sup 90}Sr, {sup 134,137}Cs and {sup 239,240}Pu), heavy metals and microelements (Co, Cu, Zn, Pb and Mn) contents in the prepared samples were determined. Analysis of samples has shown that the contents of {sup 90}Sr and {sup 137}Cs in 0-20 cm layer of the soils of test plots doesn't depend from the place of their situated and vary from 300 to 1500 Bk/m{sup 2} for {sup 90}Sr and from 500 to 4000 Bk/m{sup 2} for {sup 137}Cs. The presence in investigated samples of {sup 134}Cs indicates to contribution of accidental fallout of Fukushima-1 into contamination of the components of the natural ecosystems. Taking into account the contents of {sup 134}Cs and the {sup 134}Cs/{sup 137}Cs ratio in the gas-aerosol fallout (at the time of the accident it was almost equal) we calculated amounts of {sup 137}Cs that contaminated the different areas of Far-Eastern region. The results are in the range 70-300 Bq/m{sup 2}, which is higher than that at the Urals and Siberia territories (1.0-40.0 Bq/m{sup 2}). The contents of {sup 239,240}Pu in samples collected in the coastal zone of the Myravyov-Amyrsky Peninsula vary from 20 to 60 Bq/m{sup 2} and the ratio {sup 238}Pu/{sup 239,240}Pu is on the average 0.04. Similar levels of contamination

  20. Inter-Comparison of Suomi NPP CrIS Radiances with AIRS and IASI toward Infrared Hyperspectral Benchmark Radiance Measurements

    Science.gov (United States)

    Wang, L.; Han, Y.; Chen, Y.; Jin, X.; Tremblay, D. A.

    2013-12-01

    Atmosphere at the same spectral regions from different satellites. We will directly compare CrIS with AIRS and IASI at orbital crossing points of satellites occurring at high latitudes, the so-called simultaneous nadir overpasses (SNO). The CrIS, AIRS, and IASI spectra will be processed at common grids and then the spectral differences will be computed. In addition, an accurate collocation algorithm has been developed to spatially match high spatial resolution measurements from the Visible Infrared Imager Radiometer Suite (VIIRS) within each CrIS, AIRS, and IASI Field of View (FOV). The collocated VIIRS radiances will be used as a transfer radiometer to further evaluate the difference among AIRS-VIIRS, IASI-VIIRS, and CrIS-VIIRS. Finally, the inter-comparisons between CrIS and AIRS will be further extended to the tropical scenes because Aqua and NPP have similar equator cross time.

  1. 核电站松动件碰撞特性物理模型研究%Physical Model Study of Impact Feature of Loose Parts in NPP

    Institute of Scientific and Technical Information of China (English)

    刘金汇

    2001-01-01

    According to the features of elastic wave in metal and the physical properties of loose part impact in primary circuit in NPP,the physical model is established in frequency domain to describe the impact characters of loose parts.The mathematical representation about contacted force existed while loose part impacts the reactor vessel is assumed to be the square of the half-sine function in this paper,which is different from the half-sine function found in other publications.The mass of the loose part may be calculated basing on Hertz theory and the model.The loose part impact experiments show that this physical model can be used to describe the impact characters of loose parts in NPP,and the estimated masses of loose parts by the model tally with the measured masses very well.The establishment of the model supplies an effective mean for the anomalous diagnosis of loose parts in NPP.%结合固体内弹性波传播特性,并根据核电站一回路内松动件碰撞的物理机制,在频域内建立了描述松动件碰撞特性的物理模型。对于松动件碰撞接触力的数学描述,作出了与一般文献中假设的半正弦波函数关系不同的半正弦波平方的函数关系假设。根据 Hertz碰撞理论和该模型,可对松动件碰撞质量进行计算。实验证明该物理模型能够描述核电站松动件碰撞特性,并且质量估计结果也是合理的,为核电站松动件故障诊断提供了一种手段。

  2. The S-NPP VIIRS Day-Night Band On-Orbit Calibration/Characterization and Current State of SDR Products

    Directory of Open Access Journals (Sweden)

    Shihyan Lee

    2014-12-01

    Full Text Available The launch of VIIRS on-board the Suomi-National Polar-orbiting Partnership (S-NPP on 28 October 2011, marked the beginning of the next chapter on nighttime lights observation started by the Defense Meteorological Satellite Program’s (DMSP OLS sensor more than two decades ago. The VIIRS observes the nighttime lights on Earth through its day-night band (DNB, a panchromatic channel covering the wavelengths from 500 nm to 900 nm. Compared to its predecessors, the VIIRS DNB has a much improved spatial/temporal resolution, radiometric sensitivity and, more importantly, continuous calibration using on-board calibrators (OBCs. In this paper, we describe the current state of the NASA calibration and characterization methodology used in supporting mission data quality assurance and producing consistent mission-wide sensor data records (SDRs through NASA’s Land Product Evaluation and Analysis Tool Element (Land PEATE. The NASA calibration method utilizes the OBCs to determine gains, offset drift and sign-to-noise ratio (SNR over the entire mission. In gain determination, the time-dependent relative spectral response (RSR is used to correct the optical throughput change over time. A deep space view acquired during an S-NPP pitch maneuver is used to compute the airglow free dark offset for DNB’s high gain stage. The DNB stray light is estimated each month from new-moon dark Earth surface observations to remove the excessive stray light over the day-night terminators. As the VIIRS DNB on-orbit calibration is the first of its kind, the evolution of the calibration methodology is evident when the S-NPP VIIRS’s official calibrations are compared with our latest mission-wide reprocessing. In the future, the DNB calibration methodology is likely to continue evolving, and the mission-wide reprocessing is a key to providing consistently calibrated DNB SDRs for the user community. In the meantime, the NASA Land PEATE provides an alternative source to obtain

  3. Experimental orthogonal functions for the instabilities qualification in BWR reactors. Application Peach Bottom NPP; Funciones ortogonales experimentales para la cualificacion de inestabilidades en reactores BWR. Aplicacion a la CN Peach Bottom

    Energy Technology Data Exchange (ETDEWEB)

    Barrachina, T.; Miro, R.; Vurdu, G.

    2010-07-01

    Stability analysis in time domain and 3-D make into an operation map new point (PT{sub U}PV) of Peach Bottom NPP, using a coupled code. The results show the point PT{sub U}PV is an unstable point and the relative power distribution shows a pierced profile in the bottom of the core, typical of unstable cores.

  4. RADIATION-HYGIENIC ESTIMATION OF THE POSSIBLE LEVELS OF FAR EAST SEA FRUITS CONTAMINATION WITH LONG LIVING RADIONICLIDES DUE TO THE ACCIDENT ON ‘FUKUSHIMA-1” NPP

    Directory of Open Access Journals (Sweden)

    V. S. Repin

    2012-01-01

    Full Text Available The information on contamination levels of Pacific ocean sea water and spreading of contaminated water is given for the period of the accident on «Fukushima-1» NPP and after it. Data on fishery areals are represented. The analyses of fish contamination levels is fulfilled .The questions of fish monitoring are discussed.

  5. RADIATION-HYGIENIC ESTIMATION OF THE POSSIBLE LEVELS OF FAR EAST SEA FRUITS CONTAMINATION WITH LONG LIVING RADIONICLIDES DUE TO THE ACCIDENT ON ‘FUKUSHIMA-1” NPP

    OpenAIRE

    V. S. Repin

    2012-01-01

    The information on contamination levels of Pacific ocean sea water and spreading of contaminated water is given for the period of the accident on «Fukushima-1» NPP and after it. Data on fishery areals are represented. The analyses of fish contamination levels is fulfilled .The questions of fish monitoring are discussed.

  6. Evaluation of the state of the engines and generators of medium voltage of Almaraz NPP; Evaluacion del Estado de los Motoeres y Generadores de Media Tension de CN Almaraz

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez Fernandez, E.; Calatayud, M.; Gonzalez Redondo, R.; Tisquez Bailon, A.

    2014-07-01

    Almaraz NPP within the process of improvement of reliability of equipment has made the assessment of the State and degree of aging of medium voltage generators and engines as starting point for the implementation of a monitoring Plan in the long term of the State and Performance of these devices. (Author)

  7. 福岛核事故后核电厂安全改进行动分析%Analysis of Nuclear Power Plant Safety Improvement Action After Fukushima Daiichi NPP Accident

    Institute of Scientific and Technical Information of China (English)

    张琳; 李文宏; 杨红义

    2014-01-01

    介绍了福岛核事故后世界上主要核电国家相继开展的核电厂安全检查、再评价行动,并得出相应的检查和测试结论。法国、美国和中国等国家分别提出了福岛核事故后改进核电厂安全的建议、要求和行动,并制定了具体工程措施:在极端外部事件的设防,严重事故预防和缓解,水、电、通风实体改进,限制严重事故下的放射性释放和应急准备等主要方面开展的安全改进行动,将会提高核电厂的安全水平并提升缓解严重事故的能力。反思福岛核事故,总结福岛核事故对核电安全技术改进的促进作用,对未来核电安全技术的发展进行了展望。%The paper introduces nuclear power plant (NPP) safety inspections ,actions of re-evaluation and the main conclusions of the main countries with nuclear power in the world after the Fukushima Daiichi NPP accident .Countries ,such as France ,the United States and China ,carried out the NPP safety inspection and re-evaluation action ,and acquired conclusions . These countries respectively put forward the suggestions , demands and actions about improving NPP safety , and also formulated the specific engineering measures .The safety improvement actions ,such as fortification in extreme external events , severe accident prevention and mitigation , water , electricity and ventilation physical improvements ,limiting the radioactive release of severe accident , emergency preparedness ,and so on ,will increase the safety level and enhance ability to alleviate the severe accident of NPP .The profound consideration about the Fukushima Daiichi NPP accident , summarizing the promotion role of nuclear power safety technology improvement after the Fukushima Daiichi NPP accident , and the development of nuclear power safety technology in the future were discussed .

  8. Seasonal variations in the concentrations of selected heavy metals and radionuclides in Sava River sediments upstream and downstream of NPP Krsko

    Science.gov (United States)

    Orescanin, Visnja; Mikelic, Luka; Lulic, Stipe; Pavlovic, Gordana; Coumbassa, Nana

    2007-10-01

    In order to estimate the influence of a nuclear power plant and other industrial and agricultural anthropogenic sources on the quality of Sava River sediments, samples taken from seven locations (one upstream and six downstream of the Krsko NPP) were characterized. Seasonal variations in the sediment composition were determined on the basis of four samplings taken during the year 2004 (in February, May, October and December). Total concentrations of the elements Cr, Mn, Fe, Cu, Zn, Co and Pb in the sediment fractions less than 0.5 mm have been measured by source excited energy dispersive X-ray fluorescence (EDXRF), while 40K, 137Cs, 131I, 7Be, 228Th, Th(228Ra), U(234Th), 226Ra and 210Pb were determined by gamma spectrometry. Mineralogical examinations of the samples were performed using the X-ray diffraction (XRD) method.

  9. Seasonal variations in the concentrations of selected heavy metals and radionuclides in Sava River sediments upstream and downstream of NPP Krsko

    Energy Technology Data Exchange (ETDEWEB)

    Orescanin, Visnja [Rudjer Boskovic Institute, Laboratory for Radioecology, Bijenicka c. 54, 10000 Zagreb (Croatia)], E-mail: vobescan@irb.hr; Mikelic, Luka; Lulic, Stipe [Rudjer Boskovic Institute, Laboratory for Radioecology, Bijenicka c. 54, 10000 Zagreb (Croatia); Pavlovic, Gordana; Coumbassa, Nana [Faculty of Science, Institute for Mineralogy and Petrography, Horvatovac bb, 10000 Zagreb (Croatia)

    2007-10-15

    In order to estimate the influence of a nuclear power plant and other industrial and agricultural anthropogenic sources on the quality of Sava River sediments, samples taken from seven locations (one upstream and six downstream of the Krsko NPP) were characterized. Seasonal variations in the sediment composition were determined on the basis of four samplings taken during the year 2004 (in February, May, October and December). Total concentrations of the elements Cr, Mn, Fe, Cu, Zn, Co and Pb in the sediment fractions less than 0.5 mm have been measured by source excited energy dispersive X-ray fluorescence (EDXRF), while {sup 40}K, {sup 137}Cs, {sup 131}I, {sup 7}Be, {sup 228}Th, Th({sup 228}Ra), U({sup 234}Th), {sup 226}Ra and {sup 210}Pb were determined by gamma spectrometry. Mineralogical examinations of the samples were performed using the X-ray diffraction (XRD) method.

  10. Project Management Unit for decommissioning of NPP Bohunice VI (2003-2014); Project Management Unit para el desmantelamiento de CN Bohunice V1 (2003-2014)

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Fernandez-conde, A.; Brochet, I.; Ferreira, A.

    2015-07-01

    From October 2003 until december 2014 the Consortium consisting of Iberdrola Engineering and Construction (leader). Empresarios Agrupados Internacional, and Indra Sistemas has carried out the project Project Management Unit ((PMU) for the decommissioning of Bohunice V1 NPP (units 1 and 2), type VVER-440/V-230 in Slovakia. during the first phase (2003-2007) EdF was also part of the Consortium. The project is funded by the Bohunice International Decommissioning Support Fund (BIDSF) administered by the RBRD. The main objective of the project is to provide the necessary engineering and resources of project management for planning, execution, management, coordination and monitoring of all tasks in support of the decommissioning. (Author)

  11. LESSONS LEARNED FROM THE EURADOS SURVEY ON INDIVIDUAL MONITORING DATA AND INTERNAL DOSE ASSESSMENTS OF FOREIGNERS EXPOSED IN JAPAN FOLLOWING THE FUKUSHIMA DAIICHI NPP ACCIDENT.

    Science.gov (United States)

    Lopez, M A; Fojtik, P; Franck, D; Osko, J; Gerstmann, U; Scholl, C; Lebacq, A L; Breustedt, B; Del Risco Norrlid, L

    2016-09-01

    European Radiation Dosimetry Group e.V. (EURADOS) survey on individual monitoring data and dose assessment has been carried out for 550 foreigners returning home after being exposed in Japan to intakes of radionuclides (mainly (131)I, (132)I, (132)Te, (134)Cs and (137)Cs) as a consequence of the Fukushima Daiichi NPP accident. In vivo and in vitro measurements were performed in their respective countries at an early stage after that accident. Intakes of radionuclides were detected in 208 persons from Europe and Canada, but the committed effective dose E(50) was below the annual dose limit for the public (<1 mSv) in all the cases. Lessons learned from this EURADOS survey are presented here regarding not only internal dosimetry issues, but also the management of the emergency situation, the perception of the risk of health effects due to radiation and the communication with exposed persons who showed anxiety and lack of trust in monitoring data and dose assessments.

  12. Large-scale experimental facility for emergency condition investigation of a new generation NPP WWER-640 reactor with passive safety systems

    Energy Technology Data Exchange (ETDEWEB)

    Aniskevich, Y.N.; Vasilenko, V.A.; Zasukha, V.K.; Migrov, Y.A.; Khabensky, V.B. [Research Inst. of Technology NITI (Russian Federation)

    1997-12-31

    The creation of the large-scale integral experimental facility (KMS) is specified by the programme of the experimental investigations to justify the engineering decisions on the safety of the design of the new generation NPP with the reactor WWER-640. The construction of KMS in a full volume will allow to conduct experimental investigations of all physical phenomena and processes, practically, occurring during the accidents on the NPPs with the reactor of WWER type and including the heat - mass exchange processes with low rates of the coolant, which is typical during the utilization of the passive safety systems, process during the accidents with a large leak, and also the complex intercommunicated processes in the reactor unit, passive safety systems and in the containment with the condition of long-term heat removal to the final absorber. KMS is being constructed at the Research Institute of Technology (NITI), Sosnovy Bor, Leningrad region, Russia. (orig.). 5 refs.

  13. Site Practice

    DEFF Research Database (Denmark)

    Wahedi, Haseebullah

    2016-01-01

    different practices in the construction phase. The research is based on an ethnographic study of a case in Denmark. The empirical data were collected through direct observations and semi-structured interviews with site managers, contract managers, foremen and craftsmen. Findings revealed...... that the construction phase comprises several communities and practices, leading to various uses of the drawings. The results indicated that the craftsmen used drawings to position themselves in the correct location, and that the site managers and contract managers used them as management tools and legal documents...

  14. Detection and characterization of small hot fires: Comparing FireBird, BIRD, S-NPP VIIRS and MODIS capacities over gas flares

    Science.gov (United States)

    Ruecker, Gernot; Schroeder, Wilfrid; Lorenz, Eckehard; Kaiser, Johannes; Caseiro, Alexandre

    2016-04-01

    According to recent research, black carbon has the second strongest effect on the earth climate system after carbon dioxide. In high Northern latitudes, industrial gas flares are an important source of black carbon, especially in winter. This fact is particularly relevant for the relatively fast observed climate change in the Arctic since deposition of black carbon changes the albedo of snow and ice, thus leading to a positive feedback cycle. Here we explore gas flare detection and Fire Radiative Power (FRP) retrievals of the German FireBird TET-1 and BIRD Hotspot Recognition Systems (HSRS), the VIIRS sensor on board of the S-NPP satellite, and the MODIS sensor using temporally close to near coincident data acquisitions. Comparison is based on level 2 products developed for fire detection for the different sensors; in the case of S-NPP VIIRS we use two products: the new VIIRS 750m algorithm based on MODIS collection 6, and the 350 m algorithm based on the VIIRS mid-infrared I (Imaging) band, which offers high resolution, but no FRP retrievals. Results indicate that the highest resolution FireBird sensors offer the best detection capacities, though the level two product shows false alarms, followed by the VIIRS 350 m and 750 m algorithms. MODIS has the lowest detection rate. Preliminary results of FRP retrievals show that FireBird and VIIRS algorithms have a good agreement. Given the fact that most gas flaring is at the detection limit for medium to coarse resolution space borne sensors - and hence measurement errors may be high - our results indicates that a quantitative evaluation of gas flaring using these sensors is feasible. Results shall be used to develop a gas flare detection algorithm for Sentinel-3, and a similar methodology will be employed to validate the capacity of Sentinel 3 to detect and characterize small high temperature sources such as gas flares.

  15. Validation and expected error estimation of Suomi-NPP VIIRS aerosol optical thickness and Ångström exponent with AERONET

    Science.gov (United States)

    Huang, Jingfeng; Kondragunta, Shobha; Laszlo, Istvan; Liu, Hongqing; Remer, Lorraine A.; Zhang, Hai; Superczynski, Stephen; Ciren, Pubu; Holben, Brent N.; Petrenko, Maksym

    2016-06-01

    The new-generation polar-orbiting operational environmental sensor, the Visible Infrared Imaging Radiometer Suite (VIIRS) on board the Suomi National Polar-orbiting Partnership (S-NPP) satellite, provides critical daily global aerosol observations. As older satellite sensors age out, the VIIRS aerosol product will become the primary observational source for global assessments of aerosol emission and transport, aerosol meteorological and climatic effects, air quality monitoring, and public health. To prove their validity and to assess their maturity level, the VIIRS aerosol products were compared to the spatiotemporally matched Aerosol Robotic Network (AERONET) measurements. Over land, the VIIRS aerosol optical thickness (AOT) environmental data record (EDR) exhibits an overall global bias against AERONET of -0.0008 with root-mean-square error (RMSE) of the biases as 0.12. Over ocean, the mean bias of VIIRS AOT EDR is 0.02 with RMSE of the biases as 0.06. The mean bias of VIIRS Ocean Ångström Exponent (AE) EDR is 0.12 with RMSE of the biases as 0.57. The matchups between each product and its AERONET counterpart allow estimates of expected error in each case. Increased uncertainty in the VIIRS AOT and AE products is linked to specific regions, seasons, surface characteristics, and aerosol types, suggesting opportunity for future modifications as understanding of algorithm assumptions improves. Based on the assessment, the VIIRS AOT EDR over land reached Validated maturity beginning 23 January 2013; the AOT EDR and AE EDR over ocean reached Validated maturity beginning 2 May 2012, excluding the processing error period 15 October to 27 November 2012. These findings demonstrate the integrity and usefulness of the VIIRS aerosol products that will transition from S-NPP to future polar-orbiting environmental satellites in the decades to come and become the standard global aerosol data set as the previous generations' missions come to an end.

  16. The Human Reliability in the Accident Processing of NPP%基于核电站事故处理的人因可靠性研究

    Institute of Scientific and Technical Information of China (English)

    谷鹏飞; 张建波; 孙永滨

    2012-01-01

    Recently, Human Reliability Analysis (HRA) is becoming more important to the safety of Nuclear Power Plant (NPP). Since the digital technology is adopted in the control room of NPP, the computerized operator workstations have brought flexible operation methods. However, huge and centralized information also could cause some risks for operation tasks. Therefore, as the reliability of the NPP equipments have been increased even higher, HRA should be developed in order to guarantee the better safety of NPP. According to the new revision of NUREG 0700 Standard published by Brookhaven National Laboratory in USA, Advanced Control Room (ACR) has been defined as the control room adopted the digital technology. In China, self-determination design involving AGR is first beginning with Iingao Phase II project. Lingao Phase II NPP has been in operation mode since the year of 2010. It indicates the success of first serf-determination design involving ACR. The design process of ACR is focused on. In the analysis, the LOCA and SGTR are selected as the initiating events. And based on that, some failures of other equipments or systems have been added. Then the process that the operators deal with the accidents has been analyzed with the accident situations in order to obtain reasonable human performance data. By collecting human performance, especially in accident situations, it shows that enhancing the human reliability is very important. Therefore it would be benefit to analyze the human reliability. As a result, it also could be benefit to the design improvement of NPP, specially the design of main control room.%近些年人因可靠性研究对于核电站安全性这一问题越来越重要.在核电站控制室采用数字化技术以后,计算机化的操纵员工作站带来了便捷操作方式,但庞大且集中的信息量也带来了操作任务可靠性的风险.因此,在核电站的设备可靠性大幅度提高的前提下,人因可靠性也需要不断提高,以

  17. Site Restoration

    Energy Technology Data Exchange (ETDEWEB)

    Noynaert, L.; Bruggeman, A.; Cornelissen, R.; Massaut, V.; Rahier, A

    2001-04-01

    The objectives, the programme, and the achievements of the Site Restoration Department of SCK-CEN in 2000 are summarised. Main activities include the decommissioning of the BR3 PWR-reactor as well as other clean-up activities, projects on waste minimisation and activities related to the management of decommissioning projects. The department provides consultancy and services to external organisations.

  18. A study on the Methodology for Integrated Safety Assessment for Accidental Analysis on LILW managed in Temporary Storage Facility (TSF) at NPP

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Min Ho; Lee, Kun Jai [Korea Advanced Institute of Science and Technology, 335 Gwahak-ro, yuseong-gu, Daejeon 305-701 (Korea, Republic of); Choi, Kyung Woo [Korea Institute of Nuclear Safety, 34 Gwahak-ro, yuseong-gu, Daejeon 305-338 (Korea, Republic of)

    2010-07-01

    In Korea, the low and intermediate level wastes (LILW) generated from the operation of NPPs have been gradually increased since 1978 because of the absence of the repository for the disposal of LILW. And then, the LILW has being stored in the temporary storage facility (TSF) at each reactor sites. Fortunately, in 2005, the Gyeongju city was selected by the resident's vote in four competitive provinces for the LILW disposal facility. The repository for the disposal of LILW will be operated in end of 2009. In opposition to many of researches on the disposal of LILW, however, the risk assessment on the TSF has scarcely been conducted. Furthermore, the details in regards of the safety analysis on this facility have not been considered in the preliminary and final safety analysis report because this report focused on the nuclear reactor system rather than this facility. As a consequence of these situations, the number of the researches on the arbitrary accidents occurring in the TSF has not been enough. The objective of this study is to establish arbitrary accident scenarios and to evaluate the exposure dose in terms of the effective dose and the thyroid equivalent dose due to the arbitrary accidents originating in the TSF for LILW management. For the establishment of arbitrary accident scenarios in the TSF for LILW, the initiating event was derived by master logic diagram (MLD) method based on the fault tree analysis (FTA), and then arbitrary accident scenarios were developed by the event tree analysis (ETA) through the derived initiating events. The main initiating events led to the arbitrary operational accident, which is the dropping of a drum and fire, were derived from MLD method. The exposure effects resulted from release of radioactive materials related to arbitrary accidents in the TSF for LILW can be divided with the internal exposure caused by breathing and external exposure by radioactive plume. The 13 radionuclides for internal and external exposure

  19. Process of licensing the individualized temporal storage of NPP ASCO; Proceso de licenciamiento del ATI de C.N. Asco

    Energy Technology Data Exchange (ETDEWEB)

    Camara Ranera, P.

    2011-07-01

    The spent fuel generated in the operation of the two units Asco has been stored under water in the spent fuel pools, located in buildings of fuel, these stores will reach saturation soon, so it has been determined need to expand the storage capacity, considering appropriate the technological solution of building an Individual Temporary Storage (ATI) at the plant site.

  20. On the Seismic Safety of Nuclear Power Plant Sites in South Korea

    Science.gov (United States)

    Choi, H.; Park, S.; Yang, J.; Shim, T.; Im, C. B.

    2016-12-01

    The Korean Peninsula is located at the far eastern part of Eurasian Plate, and within the intra-plate region several hundred km away from the nearest plate boundary. The earthquakes around the Korean Peninsula show the typical characteristics of intra-plate earthquakes. So to speak, those are low seismicity, relatively smaller magnitude than that of inter-plate earthquakes, and spatially irregular epicenters. There are 24 nuclear power plants (NPPs) in operation, 4 NPPs in completion of construction, and 4 NPPs in preparation of construction in South Korea. Even though the seismicity of the Korean Peninsula is known as relatively low, but because there are more than 30 NPPs within not so large territory, thorough the preparedness of NPPs' safety against earthquakes is required. The earthquake preparedness of NPPs in South Korea is composed of 4 stages: site election, design, construction and operation. Since regulatory codes and standards are strictly applied in each stage, the NPPs in South Korea are believed to be safe enough against the maximum potential earthquake ground motion. Through data analysis on geological and seismological characteristics of the region within a radius of 320 km from the site and the detailed geological survey of the area within a radius of 8 km from the site, the design earthquake ground motion of NPPs in South Korea is determined to be 0.2g (in case of newly constructed NPPs is 0.3g) considering the maximum potential earthquake ground motion and some safety margin. The ground motions and surface deformation caused by capable faults are also considered in the seismic design of NPPs. In addition, the Korea Institute of Nuclear Safety as a regulatory technical expert organization, has been operating independent real time earthquake monitoring network as a part of securing the seismic safety of NPP sites in South Korea since late 1990's. If earthquakes with more than magnitude 3.0 are occurred in the Korean Peninsula or the peak ground

  1. Time changes in suspended sediment radiocesium concentration in rivers in Fukushima affected by the Fukushima Daiichi NPP accident

    Science.gov (United States)

    Onda, Y.

    2015-12-01

    Due to Fukushima Daiichi Nuclear Power Plant accident, radioactive materials including Cs-134 and Cs-137 were widely distributed in surrounded area. The radiocesium deposited in Fukushima area have been transported in river networks. The monitoring started at 6 sites from June 2011. Subsequently, additional 24 monitoring sites were installed between October 2012 and January 2013. Flow and turbidity (for calculation of suspended sediment concentration) were measured at each site, while suspended sediments and river water were collected every one or half month to measure Cs-134 and Cs-137 activity concentrations by gamma spectrometry. Our monitoring result data demonstrated that the Cs-137 activity concentration in sediment eroded from the runoff-erosion plot, has been almost constant for the past 3 years, however the Cs-137 concentration of suspended sediment from the forested catchment showed a slight decrease through with time. On the other hand, the suspended sediment from paddy fields and those in river water from large catchments exhibited rapid decrease in Cs-137 activity concentration with time. The decreasing trend of Cs-137 activity concentration was fitted using a two-component exponential model. Differences in the exponential reduction rates of the model were compared and discussed with respect to various land uses and catchment scales. Such analysis can provide important insights into the future prediction of radiocesium wash-off from catchments with different land uses.

  2. Climate-related large-scale variation in forest carbon turnover rate - Evaluating global vegetation models using remote sensing products of biomass and NPP

    Science.gov (United States)

    Thurner, Martin; Beer, Christian; Carvalhais, Nuno; Ciais, Philippe; Forkel, Matthias; Friend, Andrew; Ito, Akihiko; Kleidon, Axel; Lomas, Mark; Quegan, Shaun; Tito Rademacher, Tim; Santoro, Maurizio; Schaphoff, Sibyll; Schmullius, Christiane; Tum, Markus; Wiltshire, Andy

    2017-04-01

    Vegetation carbon turnover, in terms of its spatial variation and its response to climate change, is one of the most important, but also most uncertain carbon fluxes in terrestrial ecosystems. Its measurement is hardly possible by inventory studies alone, due to several reasons: First, vegetation carbon turnover involves a variety of processes, including litterfall, background mortality, and mortality by all kinds of disturbances, affecting single biomass compartments, individual trees or even whole ecosystems. Second, these processes act on very different timescales, involving short-term extreme events and long-term responses, and spatial scales, from local extremes to global impacts. In order to capture this variety of processes, spatial scales and timescales, here we estimate forest carbon turnover rate from novel remote sensing products of NPP and biomass. These products allow investigating the spatial variation in long-term mean turnover rate at 0.5° resolution across northern boreal and temperate forest ecosystems and its relation to climate variables. We observe an increase in turnover rate with colder and longer winters in boreal forests, whereas in temperate forests the spatial gradients in turnover rate are related to the length of both warm and dry periods. Thus, we hypothesize that the spatial variation in turnover rate can be explained by direct and indirect frost damage effects on mortality in boreal forests but drought and insect outbreaks in temperate forests. An evaluation of a set of global vegetation models (GVMs) participating in the Inter-Sectoral Impact Model Intercomparison Project (ISI-MIP; including HYBRID4, JeDi, JULES, LPJml, ORCHIDEE, SDGVM, VISIT) shows that those models are able to reproduce the observation-based spatial relationships only to a limited extent. Deviations from the observation-based turnover rates can be mostly attributed to severe overestimations of biomass, however also important differences in the simulated spatial

  3. Site Restoration

    Energy Technology Data Exchange (ETDEWEB)

    Noynaert, L.; Bruggeman, A.; Cornelissen, R.; Massaut, V.; Rahier, A

    2002-04-01

    The objectives, the programme, and the achievements of SCK-CEN's Site Restoration Department for 2001 are described. Main activities include the decommissioning of the BR3 PWR-reactor as well as other clean-up activities, projects on waste minimisation and the management of spent fuel and the flow of dismantled materials and the recycling of materials from decommissioning activities based on the smelting of metallic materials in specialised foundries. The department provides consultancy and services to external organisations and performs R and D on new techniques including processes for the treatment of various waste components including the reprocessing of spent fuel, the treatment of tritium, the treatment of liquid alkali metals into cabonates through oxidation, the treatment of radioactive organic waste and the reconditioning of bituminised waste products.

  4. ACCIDENT AT «FUKUSHIMA-»I NPP: FIRST RESULTS OF EMERGENCY RESPONSE REPORT 2: ACTIVITIES OF THE ROSPOTREBNADZOR AUTHORITIES FOR THE RADIATION PROTECTION OF THE RUSSIAN FEDERATION POPULATION ON THE EARLY STAGE OF ACCIDENT

    Directory of Open Access Journals (Sweden)

    G. G. Onischenko

    2011-01-01

    Full Text Available Basic measures of the Rospotrebnadzor emergency response during the early stage of the «Fukushima-I» NPP radiation accident are being analyzed in the article. Radiation monitoring of the environmental objects of the territories of the Russian Federation Far East Federal District, radiation control of arriving from Japan vehicles, freights and passengers as well as imported from Japan food products were promptly organized. This allowed to get reliable evaluations of the levels of radioactive contamination at the Russian Federation territory and population exposure doses due to the «Fukushima-I» NPP accident, timely exclude the possibility of import to the Russian territory for the freights, vehicles, food products having contamination exceeding established in the Russian Federation standards.

  5. ACTIVITIES OF ADMINISTRATION OF ROSPOTREBNADZOR IN PRIMORSKY TERRITORY AND FHO “CENTER OF HYGIENE AND EPIDEMIOLOGY IN PRIMORSKY TERRITORY” IN ACCORDANCE WITH THE ACCIDENT ON NPP “FUKUSHIMA-1”

    Directory of Open Access Journals (Sweden)

    Yu. V. Ananyev

    2011-01-01

    Full Text Available The present work contents information about the activities of Rospotrebnadzor organizations in Primorsky territory after the accident at the “Fukushima-1” NPP. The data are given on the staff, equipment and methodical providences of Rospotrebnadzor organizations in Primorsky territory to the moment of the accident. Article presents the results of the dose rate measurements in monitoring points and laboratory investigations of the foodstuffs and environmental samples after the accident in Primorsky territory. 

  6. Monitoring of social networks and their links with the external communication plan of Cofrentes NPP; Monitorizacion de redes sociales y su vinculacion con el plan de comunicacion externa de CN Cofrentes

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Garcia, C.; Tejedor Garcia, E.

    2015-07-01

    Currently, new communication models are being established in the society. Companies, as part of society and as socially responsible entities should be part of these changes and, therefore, adapt themselves to these new models of communication. In one approach and study of this new model, some experiences obtained by Cofrentes Nuclear Power Plant are studied, a SWOT analysis of the situation is made and are raised the three main objectives Cofrentes NPP should pursue if it enters in the social networks field. (Author)

  7. The use of simulators for the training of the NPP licensed personnel; El uso de los simuladores de adiestramiento como apoyo para el ajuste de sistemas de instrumentacion y control

    Energy Technology Data Exchange (ETDEWEB)

    Ortega, F.; Ruiz, J. A.

    2005-07-01

    The full scope simulators used for the training of the NPP licensed personnel, are characterised by the integration of models of all the systems of the plant, so that a real time integrated response with a high degree of physical and functional fidelity may be provided. Due to these features, these simulators have showed high capabilities in the engineering field where they can support with effectiveness the design and tuning of I and C plant modifications. (Author)

  8. Experience gained from carrying out ultrasonic cleaning of fuel assemblies and control and protection system assemblies in the Novovoronezh NPP unit 3

    Science.gov (United States)

    Gorburov, V. I.; Shvarov, V. A.; Vitkovskii, S. L.

    2014-02-01

    A growth of deposits on fuel assembly elements was revealed during operation of the Novovoronezh NPP Unit 3 starting from 1997. This growth caused progressive reduction of coolant flow rate through the reactor core and increase of pressure difference across the assemblies, which eventually led to the need to reduce the power unit output and then to shut down the power unit. In view of these circumstances, it was decided to develop an installation for ultrasonic cleaning of fuel assemblies. The following conclusions were drawn with regard of this installation after completion of all stages of its development, commissioning, and improvement: no detrimental effect of ultrasound on the integrity of fuel assemblies was revealed, whereas the cleaning effect on the fuel assemblies subjected to ultrasonic treatment and improvement of their thermal-hydraulic characteristics are obvious. With these measures implemented, it became possible to clean all fuel assemblies in the core in 2011, to achieve better thermal-hydraulic characteristics, and to avoid reduction of power output and off-scheduled outages of Unit 3.

  9. Experimental studies into the fluid dynamic performance of the coolant flow in the mixed core of the Temelin NPP VVER-1000 reactor

    Directory of Open Access Journals (Sweden)

    S.M. Dmitriev

    2015-11-01

    Full Text Available The paper presents the results of studies into the interassembly coolant interaction in the Temelin nuclear power plant (NPP VVER-1000 reactor core. An aerodynamic test bench was used to study the coolant flow processes in a TVSA-type fuel assembly bundle. To obtain more detailed information on the coolant flow dynamics, a VVER-1000 reactor core fragment was selected as the test model, which comprised two segments of a TVSA-12 PLUS fuel assembly and one segment of a TVSA-T assembly with stiffening angles and an interassembly gap. The studies into the coolant fluid dynamics consisted in measuring the velocity vector both in representative TVSA regions and inside the interassembly gap using a five-channel pneumometric probe. An analysis into the spatial distribution of the absolute flow velocity projections made it possible to detail the TVSA spacer, mixing and combined spacer grid flow pattern, identify the regions with the maximum transverse coolant flow, and determine the depth of the coolant flow disturbance propagation and redistribution in adjacent TVSA assemblies. The results of the studies into the interassembly coolant interaction among the adjacent TVSA assemblies are used at OKBM Afrikantov to update the VVER-1000 core thermal-hydraulic analysis procedures and have been added to the database for verification of computational fluid dynamics (CFD codes and for detailed cellwise analyses of the VVER-100 reactor cores.

  10. Illuminating the Capabilities of the Suomi National Polar-Orbiting Partnership (NPP Visible Infrared Imaging Radiometer Suite (VIIRS Day/Night Band

    Directory of Open Access Journals (Sweden)

    Steven D. Miller

    2013-12-01

    Full Text Available Daytime measurements of reflected sunlight in the visible spectrum have been a staple of Earth-viewing radiometers since the advent of the environmental satellite platform. At night, these same optical-spectrum sensors have traditionally been limited to thermal infrared emission, which contains relatively poor information content for many important weather and climate parameters. These deficiencies have limited our ability to characterize the full diurnal behavior and processes of parameters relevant to improved monitoring, understanding and modeling of weather and climate processes. Visible-spectrum light information does exist during the nighttime hours, originating from a wide variety of sources, but its detection requires specialized technology. Such measurements have existed, in a limited way, on USA Department of Defense satellites, but the Suomi National Polar-orbiting Partnership (NPP satellite, which carries a new Day/Night Band (DNB radiometer, offers the first quantitative measurements of nocturnal visible and near-infrared light. Here, we demonstrate the expanded potential for nocturnal low-light visible applications enabled by the DNB. Via a combination of terrestrial and extraterrestrial light sources, such observations are always available—expanding many current existing applications while enabling entirely new capabilities. These novel low-light measurements open doors to a wealth of new interdisciplinary research topics while lighting a pathway toward the optimized design of follow-on satellite based low light visible sensors.

  11. Spatial and Temporal Pattern of Vegetation NPP and Its Relationship with Climate in the Southeastern China%中国东南部植被NPP的时空格局变化及其与气候的关系研究

    Institute of Scientific and Technical Information of China (English)

    崔林丽; 杜华强; 史军; 陈昭; 郭巍

    2016-01-01

    基于2001~2010年MOD17A3年均NPP数据和气象站点气温、降水资料,利用GIS空间分析技术和数理统计方法研究中国东南部植被NPP的时空格局、动态变化及与气候要素的关系.结果表明,中国东南部植被年均NPP总体上呈现从南到北、由东至西逐渐减少的分布,不同植被类型的NPP存在明显差异,以常绿阔叶林最高,落叶针叶林最低.2001~2010年间,植被NPP整体上略有减少.空间上植被NPP在南部地区明显减少,而在北部地区明显增加.植被NPP与降水和气温的相关性均表现出明显的地域差异.%The interaction between vegetation and atmosphere is a research focus and hotspot in the field of earth science under the background of global change. Net primary productivity (NPP) has become a key link of biogeochemical cycle process of terrestrial ecosystems in the global and regional scale, which embodies the complex interaction between vegetation, soil and climate, and is strongly influenced by human activities and global environmental change. Therefore, it has important significance to know the spatial and temporal pattern, variation characteristic and the relationship between terrestrial NPP and climate factors, especially temperature and precipitation, in the evaluation of environment quality, estimation of the terrestrial carbon source/sink po-tentials, and the management and use of natural resources. Based on the average annual NPP data of MOD17A3 data and temperature and rainfall data from meteorological stations during 2001-2010, the tempo-ral and spatial pattern and dynamic change of vegetation NPP in southeastern China and their relationship with climate elements were analyzed using GIS spatial analysis technology and mathematical statistics method. The results indicate that average annual vegetation NPP in southeastern China gradually decreased from the south-ern to the northern parts and from the eastern to the western parts as a whole. Different

  12. Risk Management and Nuclear Insurance Program within Societatea Nationala Nuclearelectrica S.A

    Energy Technology Data Exchange (ETDEWEB)

    Havris, Alexandru [Societatea Nationala Nuclearelectrica S.A, 65 Polona Street, code 010494, sector 1, Bucharest (Romania)

    2008-07-01

    This paper shall present the Risk Management and associated nuclear insurance program developed within Societatea Nationala 'Nuclearelectrica' S.A, owner and operator of Units 1 and 2 Cernavoda NPP, the Nuclear Fuel Plant and in charge with commissioning of Units 3 and 4. From the risk management perspective, the main aspects that energy industry has to face due to global economic changes within a dynamic business environment are highlighted. In order to mitigate the operational and investment associated risks, Societatea Nationala 'Nuclearelectrica' S.A. successfully developed, implemented and maintained a coherent insurance program both on local and international insurance market. (authors)

  13. Region 9 NPL Sites (Superfund Sites) Polygons

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site POLYGON locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  14. Region 9 NPL Sites (Superfund Sites 2013)

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site POINT locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  15. Region 9 NPL Sites (Superfund Sites)

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site POINT locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  16. Cloud-based opportunities in scientific computing: insights from processing Suomi National Polar-Orbiting Partnership (S-NPP) Direct Broadcast data

    Science.gov (United States)

    Evans, J. D.; Hao, W.; Chettri, S.

    2013-12-01

    The cloud is proving to be a uniquely promising platform for scientific computing. Our experience with processing satellite data using Amazon Web Services highlights several opportunities for enhanced performance, flexibility, and cost effectiveness in the cloud relative to traditional computing -- for example: - Direct readout from a polar-orbiting satellite such as the Suomi National Polar-Orbiting Partnership (S-NPP) requires bursts of processing a few times a day, separated by quiet periods when the satellite is out of receiving range. In the cloud, by starting and stopping virtual machines in minutes, we can marshal significant computing resources quickly when needed, but not pay for them when not needed. To take advantage of this capability, we are automating a data-driven approach to the management of cloud computing resources, in which new data availability triggers the creation of new virtual machines (of variable size and processing power) which last only until the processing workflow is complete. - 'Spot instances' are virtual machines that run as long as one's asking price is higher than the provider's variable spot price. Spot instances can greatly reduce the cost of computing -- for software systems that are engineered to withstand unpredictable interruptions in service (as occurs when a spot price exceeds the asking price). We are implementing an approach to workflow management that allows data processing workflows to resume with minimal delays after temporary spot price spikes. This will allow systems to take full advantage of variably-priced 'utility computing.' - Thanks to virtual machine images, we can easily launch multiple, identical machines differentiated only by 'user data' containing individualized instructions (e.g., to fetch particular datasets or to perform certain workflows or algorithms) This is particularly useful when (as is the case with S-NPP data) we need to launch many very similar machines to process an unpredictable number of

  17. Modeling the effect of 1 MeV electron irradiation on the performance of n+-p-p+ silicon space solar cells

    Science.gov (United States)

    Hamache, Abdelghani; Sengouga, Nouredine; Meftah, Afak; Henini, Mohamed

    2016-06-01

    Energetic particles such as electrons and protons induce severe degradation on the performance of solar cells used to power satellites and space vehicles. This degradation is usually attributed to lattice damage in the active region of the solar cell. One of the phenomena observed in silicon solar cells exposed to 1 MeV electron irradiation is the anomalous degradation of the short circuit current. It initially decreases followed by a recovery before falling again with increasing electron fluence. This behavior is usually attributed to type conversion of the solar cell active region. The other figures of merit, on the other hand, decrease monotonically. In this work numerical simulator SCAPS (Solar Cell Capacitance Simulator) is used to elucidate this phenomenon. The current-voltage characteristics of a Si n+-p-p+ structure are calculated under air mass zero spectrum with the fluence of 1 MeV electrons as a variable parameter. The effect of irradiation on the solar cell is simulated by a set of defects of which the energy levels lie deep in energy gap of silicon (much larger than the characteristic thermal energy kT far from either the conduction or valence band). Although several types of deep levels are induced by irradiation including deep donors (exchange electrons mainly with the conduction band), deep acceptors (exchange electrons mainly with the valence band) and/or generation-recombination centers (exchange electrons with both the conduction and valence bands), it was found that, only one of them (the shallowest donor) is responsible for the anomalous degradation of the short circuit current. It will be also shown, by calculating the free charge carrier profile in the active region, that this behavior is not related to type conversion but to a lateral widening of the space charge region.

  18. RADIATION RISKS ASSESSMENT DUE TO CONSUMPTION OF THE FAR EAST FOOD FISH AFTER THE ACCIDENT ON “FUKUSHIMA-1” NPP

    Directory of Open Access Journals (Sweden)

    G. G. Onishсhenko

    2015-01-01

    Full Text Available The paper presents a review of the data on radioactivity releases to thePacific Oceanlevels after the Fukushima NPP accident. It is shown that the potential risk of of the seafood contamination with the long-living radionuclides 134Cs and 137Cs, which continue to be released to the Pacific Ocean up to the present time. Contribution of 90Sr to the total radioactive contamination does not exceed 3%. Review of the literature data on the modeling of radioactivity spot diffusion showed that due to the flows in the Pacific Ocean the radioactivity transfer toKamchatka Peninsula, the Kuril Islands, and the ingress into theOkhotskSeawas expected in 2014. It is expected a slight increase of the cesium concentration in water and sea biota in the area of Russia fishing zone FAO 61, but not higher than the concentrations in the Black Sea and Baltic Sea after the Chernobyl accident. Data on measurements of the pollution of fish caught in the Pacific Ocean,JapanandOkhotskSeasin 2011–2014 years during the sea expeditions organized by the Russian Geographical Society, yet showed that the total content of cesium isotopes in any fish sample have not eceeded the value of 0.7 Bq/kg. The prognose risk assessment carried out for the conservative scenario of water contamination in fishing zones ofRussiaand seafood consumption characteristic for the region showed that this risk is minimal according to the WHO scale and does not exceed the risk from fish caughed in Black Sea and Baltic Sea, contaminated after theChernobylaccident, consumption. 

  19. The NPP and J1 NOAA Unique Combined Atmospheric Processing System (NUCAPS) for atmospheric thermal sounding: recent algorithm enhancements tailored to near real time users applications.

    Science.gov (United States)

    Gambacorta, A.; Barnet, C. D.; Smith, N.; Pierce, R. B.; Smith, J. W.; Spackman, J. R.; Goldberg, M.

    2016-12-01

    NUCAPS is the NOAA operational algorithm to retrieve thermodynamic variables from hyper spectral thermal sounders such as CrIS on NPP and J1, IASI on MetOp and AIRS on Aqua, in conjunction with microwave sounders, such as ATMS, AMSU and MHS. NUCAPS builds on a long-term, multi-agency investment on algorithm research and development. The uniqueness of this algorithm consists in a number of features that are key in providing highly accurate and stable atmospheric retrievals, suitable for both real time weather and long-term climate applications. NUCAPS is an all-weather, full column and high vertical resolution system compatible with multiple hyper spectral sounders. This design was intended to enable multiple, global yet consistent daily measurements of the full atmospheric state and plays a critical role in filling in for the NWS in-situ measurement gaps, particularly during the early afternoon pre-convective and fast developing regimes. We are now developing the capability to run a Lagrangian transport model that can collocate NUCAPS thermodynamic fields to surface wind fields and propagate NUCAPS moist and dry layers in time and space. This is key to enhance a forecaster's predictive knowledge of what sources are at play in the evolution or suppression of convective or fire events. NUCAPS has proven robust in capturing extreme and high impact weather events during previously held JPSS PGRR initiatives, such as the 2015 CalWater, the 2016 Hazardous Test bed Spring Experiment, SENEX, SONGNEX and the 2016 El Nino Rapid Response campaign. Results from these initiatives will be presented at the meeting.

  20. Utilization of the Suomi National Polar-Orbiting Partnership (NPP Visible Infrared Imaging Radiometer Suite (VIIRS Day/Night Band for Arctic Ship Tracking and Fisheries Management

    Directory of Open Access Journals (Sweden)

    William C. Straka

    2015-01-01

    Full Text Available Maritime ships operating on-board illumination at night appear as point sources of light to highly sensitive low-light imagers on-board environmental satellites. Unlike city lights or lights from offshore gas platforms, whose locations remain stationary from one night to the next, lights from ships typically are ephemeral. Fishing boat lights are most prevalent near coastal cities and along the thermal gradients in the open ocean. Maritime commercial ships also operate lights that can be detected from space. Such observations have been made in a limited way via U.S. Department of Defense satellites since the late 1960s. However, the Suomi National Polar-orbiting Partnership (S-NPP satellite, which carries a new Day/Night Band (DNB radiometer, offers a vastly improved ability for users to observe commercial shipping in remote areas such as the Arctic. Owing to S-NPP’s polar orbit and the DNB’s wide swath (~3040 km, the same location in Polar Regions can be observed for several successive passes via overlapping swaths—offering a limited ability to track ship motion. Here, we demonstrate the DNB’s improved ability to monitor ships from space. Imagery from the DNB is compared with the heritage low-light sensor, the Operational Linescan System (OLS on board the Defense Meteorological Support Program (DMSP satellites, and is evaluated in the context of tracking individual ships in the Polar Regions under both moonlit and moonless conditions. In a statistical sense, we show how DNB observations of ship lights in the East China Sea can be correlated with seasonal fishing activity, while also revealing compelling structures related to regional fishery agreements established between various nations.

  1. TSO support to the State Nuclear Regulatory Committee of Ukraine in the licensing of Rovno 4 and Khmelnitsky 2 NPP units (K2R4)

    Energy Technology Data Exchange (ETDEWEB)

    Gorbatchev, A. [IRSN (France); Teske, H.; Zabka, H. [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH (Germany); Zelenyi, O. [SSTC, Kiev (Ukraine)

    2004-07-01

    In 2003 the Ukrainian government decided to complete the construction without loans from the EBRD and the EU and to start-up Rovno 4 and Khmelnitsky 2 NPP units (K2R4) in 2004. K2R4 are two VVER-1000 reactors under construction since 80th. At request of EBRD and EC RISKAUDIT assessed the to be implemented safety upgrading measures at the time of commissioning as it is planned currently by NAEK against the safety upgrading measures in the K2R4 modernisation programme planned in 2000. In deviation of the modernisation programme 2000 the operator NAEK changed the technical contents for the solution of 3 issues (issues ''develop and introduce new programme of surveillance specimens'', ''rigid support of steam and feed-water lines at the outlet of the reactor building'' and ''analyses to determine extent of pipeline breaks'') and 19 measures were postponed from the pre-commissioning package to the phase after commissioning. The changed technical solutions for the above mentioned 3 issues would not allow resolving of the safety concerns. On demand of the regulator SNRCU the operator NAEK will implement an upgraded surveillance programme for the RPVs and the application of the no-break zone concept on main steam lines and main feedwater lines. The correct realisation of these measures allows solving of the 3 safety issues. The impact on the safety due to the postponing of those 19 measures is acceptable due to the fact that adequate preventive and/or compensatory measures are foreseen. All 19 postponed measures will be completed in the three year period after commissioning. The actual scope of measures allows upgrading K2R4 to a safety level which is acceptable for commissioning. (orig.)

  2. Automatic Cloud and Shadow Detection in Optical Satellite Imagery Without Using Thermal Bands—Application to Suomi NPP VIIRS Images over Fennoscandia

    Directory of Open Access Journals (Sweden)

    Eija Parmes

    2017-08-01

    Full Text Available In land monitoring applications, clouds and shadows are considered noise that should be removed as automatically and quickly as possible, before further analysis. This paper presents a method to detect clouds and shadows in Suomi NPP satellite’s VIIRS (Visible Infrared Imaging Radiometer Suite satellite images. The proposed cloud and shadow detection method has two distinct features when compared to many other methods. First, the method does not use the thermal bands and can thus be applied to other sensors which do not contain thermal channels, such as Sentinel-2 data. Secondly, the method uses the ratio between blue and green reflectance to detect shadows. Seven hundred and forty-seven VIIRS images over Fennoscandia from August 2014 to April 2016 were processed to train and develop the method. Twenty four points from every tenth of the images were used in accuracy assessment. These 1752 points were interpreted visually to cloud, cloud shadow and clear classes, then compared to the output of the cloud and shadow detection. The comparison on VIIRS images showed 94.2% correct detection rates and 11.1% false alarms for clouds, and respectively 36.1% and 82.7% for shadows. The results on cloud detection were similar to state-of-the-art methods. Shadows showed correctly on the northern edge of the clouds, but many shadows were wrongly assigned to other classes in some cases (e.g., to water class on lake and forest boundary, or with shadows over cloud. This may be due to the low spatial resolution of VIIRS images, where shadows are only a few pixels wide and contain lots of mixed pixels.

  3. Contaminated Sites in Iowa

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — Sites contaminated by hazardous materials or wastes. These sites are those administered by the Contaminated Sites Section of Iowa DNR. Many are sites which are...

  4. The Contribution of Paleoseismology to Seismic Hazard Assessment in Site Evaluation for Nuclear Installations

    Science.gov (United States)

    Decker, Kurt; Guerrieri, Luca; Fukushima, Yoshimitsu

    2015-04-01

    In the framework of site evaluation/re-evaluation procedures for nuclear power plants (NPP), paleoseismology plays an essential role not only for Fault Displacement Hazard Assessment (FDHA) but also for Seismic Hazard Assessment (SHA). The relevance of paleoseismology is recommended in the reference IAEA Safety Guide (IAEA SSG-9) and has been dramatically confirmed in recent time especially after the accident at the Fukushima Daiichi NPP caused by the disastrous great Tohoku earthquake and tsunami occurred on 11 March 2011. After this event, the IAEA International Seismic Safety Center promoted a technical document aimed at encouraging and supporting Member States, especially from newcomer countries, to include paleoseismic investigations into the geologic database, highlighting the value of earthquake geology studies and paleoseismology for nuclear safety and providing standard methodologies to perform such investigations. In detail, paleoseismic investigations in the context of site evaluation of nuclear installations have the following main objectives: i) identification of seismogenic structures based on the recognition of effects of past earthquakes in the regional area; ii) improvement of the completeness of earthquake catalogs, through the identification and dating of ancient moderate to large earthquakes, whose trace has been preserved in the geologic records; iii) estimation of the maximum seismic potential associated with an identified seismogenic structure/source, typically on the basis of the amount of displacement per event (evaluable in paleoseismic trenches), as well as of the geomorphic and stratigraphic features interpretable as the cumulative effect of repeated large seismic events (concept of "seismic landscape"); iv) rough calibration of probabilistic seismic hazard assessment (PSHA), by using the recurrence interval of large earthquakes detectable by paleoseismic investigations, and providing a "reality check" based on direct observations of

  5. Equipment for decontamination of the bottom of the cavity of NPP. During refueling operations; Equipo para la descontaminacion del fondo de la cavidad de CC.NN. durante las operaciones de recarga de combustible

    Energy Technology Data Exchange (ETDEWEB)

    Vaquer Perez, J. I.; Lacalle Bayo, J.; Martinez Pulgarin, A.

    2013-07-01

    In this work is presented the DEMOS robot, computer designed and developed by Dominguis Group to fund decontamination of nuclear power plants cavity during refueling operations. The aim of the project is soil decontamination of the cavity, at-flooded pool by brushing and vacuuming after operations movement of fuel in order to reduce operational doses to workers and the spread of contamination in the activities undertaken thereafter cavity. Finally, the results obtained when using the DEMOS at the 25th refueling NPP are presented Trillo.

  6. Application of the IS-22. Implantation of aging management programs in Cofrentes NPP; Aplicacion de la IS-22. Implantacion de los programas de gestion del envejecimiento en CN Cofrentes

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Zapat, J. D.; Sainero, J.

    2014-10-01

    The Safety Instruction IS-22 is mainly based on the License Renewal rule (10CFR54), unlike the 10 CFR54, the IS-22 is a continued process to be met in the current operation as well as in the long term operation period. Key elements of the aging management according to the IS-22 are the Aging Management Program (AMPs). The AMPs implementation as part of the current Plant Life Management in Cofrentes NPP provides a new approach to the plant maintenance and a solid support for the long term operation. (Author)

  7. Evaluation of fatigue vessel in the Sta. M Garona NPP : real transients and design transients; Evaluacion de la fatiga en la vasija de CN Santa M de Garona: transitorios reales frente a transitorios de diseno

    Energy Technology Data Exchange (ETDEWEB)

    Martin, J.; Gorrochategui, I.

    2005-07-01

    The number of transient that control the fatigue of its reactor pressure vessel is included in the Sta. M Garona NPP Technical Specifications, being the different transients described in the design specification of the corresponding component. In this work, on the one hand, the description of the design transients with their corresponding real ones is compared and, on the other hand, the number of occurrences and the number of transients originally estimated is also compared. In both cases the influence of the difference between design and reality in the fatigue usage is discussed. (Author)

  8. Construction project of Flamanville 3 NPP. The participation of Iberdrola engineering and Construction; El proyecto de construccion de la central nuclear de Flamanville 3. La participacion de Iberdrola Ingenieria y Construccion

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Prada, J. I.; Cubian, B.

    2014-10-01

    Iberdrola Engineering and Construction (IIC) leads several projects mini EPC for the EPR Flamanville 3 NPP for providing important for safety components and auxiliary systems in the pump house and in the turbine island. The realization of this new nuclear project has been a challenge from the technical and organizational perspective because the plant is the first of the new nuclear station (FDAKE) type EPR 1700 MWe series in a highly restrictive environment due to to the large number of particular requirements from the final customer and the meager degree of progress of the design to the date of commencement of construction. (Author)

  9. Expedition surveys of the sea water and atmospheric air radioactive contamination in the Russian Far Eastern coastal areas and in the North Western Pacific in connection with accident at the "Fukushima-1" NPP

    Science.gov (United States)

    Nikitin, Aleksandr; Shershakov, Vjacheslav

    2013-04-01

    In accordance with decision of the Russian Federation Federal Service on Hydrometeorology and Environmental Monitoring (Roshydromet) on assessment of the sea water and atmospheric air radioactive contamination in the Sea of Japan and in Kurile-Kamchatka region of the Pacific ocean, in connection with accident at the "Fukushima-1" NPP, two expedition surveys were conducted in the Sea of Japan and in the North-Western Pacific (in the area adjacent to Kurile Islands and in the Kuroshio current selected area (coordinates 36°00'-39°33' n., 146°33'-150°00' e.): first survey April - May 2011, second survey August-September 2012. Both surveys were conducted under the Russian Geographical Society patronage. The results of measurements of Cs-137, Cs-134, Sr-90, Pu-239,240 and H-3 concentrations in the sea water samples and I-131, Cs-137 and Cs-134 concentrations in atmospheric aerosol samples are presented and discussed. The data received allowed to conclude that the levels of contamination by products of accidental releases and discharges at "Fukushima-1" NPP observed in investigated water areas near the Russian Federation coast of the Sea of Japan and of the Kurile- Kamchatka region of the Pacific ocean have no hazard. However, these expedition surveys revealed large-scale contamination by Cs-137 and Cs-134 of water areas of the North-Western Pacific in the investigated region of the Kuroshio current. The Cs-137 concentration in sea water at a distance about 400 km from accidental NPP in April-May, 2011 reached 30 Bq/m3, which approximately 20 times exceed preaccidental level, and it was found that water mass till more than 100 m below the surface was contaminated. For correct estimation of current and potential consequences of the "Fukushima-1" accident for the Far-Eastern water areas a special study is reasonable to perform of transport with marine currents of products of accidental releases and discharges at "Fukushima-1" NPP.

  10. Optimized planning of in-service inspections of local flow-accelerated corrosion of pipeline elements used in the secondary coolant circuit of the VVER-440-based units at the Novovoronezh NPP

    Science.gov (United States)

    Tomarov, G. V.; Povarov, V. P.; Shipkov, A. A.; Gromov, A. F.; Budanov, V. A.; Golubeva, T. N.

    2015-03-01

    Matters concerned with making efficient use of the information-analytical system on the flow-accelerated corrosion problem in setting up in-service examination of the metal of pipeline elements operating in the secondary coolant circuit of the VVER-440-based power units at the Novovoronezh NPP are considered. The principles used to select samples of pipeline elements in planning ultrasonic thickness measurements for timely revealing metal thinning due to flow-accelerated corrosion along with reducing the total amount of measurements in the condensate-feedwater path are discussed.

  11. NPP Grafenrheinfeld. No thank you. Questions and answers concerning the oldest operating crack susceptible reactor in the federal republic; AKW Grafenrheinfeld. Nein danke. Fragen und Antworten zum aeltesten noch laufenden und rissanfaelligsten Reaktor der Republik

    Energy Technology Data Exchange (ETDEWEB)

    Darge, Tobias

    2014-03-15

    The brochure discusses questions on the NPP Grafenrheinfeld. concerning the following issues: reactor type, operating company, nuclear fuel, licensing, radioactive waste management, susceptibility to damage, stress test results, critical arguments concerning the reactor pressure vessel steel and the containment, cracks in the primary circuit, safety in case of an aircraft crash, possibility of a severe accident, consequences of a severe accident, medical emergency plan, public information for an emergency case, shutdown at the end of 2015, necessity of a new power plant for energy security?.

  12. Maximum credible earthquake (MCE) magnitude of structures affecting the Ujung Lemahabang site

    Energy Technology Data Exchange (ETDEWEB)

    Soerjodibroto, M. [National Atomic Energy Agency, Jakarta (Indonesia)

    1997-03-01

    This report analyse the geological structures in/around Muria Peninsula that might originating potential earthquake hazard toward the selected site for NPP, Ujung Lemahabang (ULA). Analysis was focused on the Lasem fault and AF-1/AF-4 offshore faults that are considered as the determinant structures affecting the seismicity of ULA (Nira, 1979, Newjec, 1994). Methods for estimating the MCE of the structures include maximum historical earthquake, and relationship between the length of the fault and the magnitude of earthquake originating from the known structure (Tocher, Iida, Matsuda, Wells and Coopersmith). The MCE magnitude estimating by these method for earthquake originating along the Lasem and AF-1/AF-4 faults vary from 2,1M to 7,0M. Comparison between the result of historical data and fault-magnitude relationship, however, suggest a MCE magnitude of Ms=7,0M for both fault zones. (author)

  13. SUBSTANTIATION OF THE CONCEPT OF TRANSFER TO CONDITIONS OF NORMAL POPULATION ACTIVITY OF THE SETTLEMENTS CONSIDERED TO BE ZONES OF RADIOACTIVE CONTAMINATION AFTER THE CHERNOBYL NPP ACCIDENT

    Directory of Open Access Journals (Sweden)

    I. K. Romanovich

    2016-01-01

    Full Text Available The article contains substantiation of criteria of return of territories with radioactive pollution caused by Chernobyl NPP accident to conditions of normal population activity. It is established that in 12 entities of the Russian Federation (except Bryansk and Kaluga regions all agricultural food produce, including that from the personal part-time farms, corresponds to hygienic specifications. Non- corresponding to the standard SanPiN 2.3.2.1078-01 on 137Cs are part of the milk samples produced at personal part-time farms of the Bryansk region and most of natural foodstuff samples (berries, mushrooms, fish and wild animals meat in Bryansk and Kaluga regions. The content of 137Cs both in agricultural and in wild-growing foodstuff produced at radioactively contaminated territories depends not only on the density of radioactive pollution, but also on the types of soil. The average settlement annual effective dose of population irradiation (AAED90 in the 3700 among 4413 settlements as of 2014 was below 0.3 mSv/year. Only in 713 settlements of Bryansk, Kaluga, Oryol and Tula regions the AAED90 exceeds 0.3 mSv/year. In the Bryansk region, once subject to the greatest radioactive contamination, in 276 settlements AAED90 exceeds 1 mSv/year, and in 8 of them - 5 mSv/year.The legislation of the Russian Federation defines only criteria and requirements for consideration of the suffered territories as zones of radioactive contamination. Requirements on transfer of territories polluted by radiation accidents and their population to normal life activity conditions (regarding the radiological factor are not developed.Radiological criteria are suggested for transfer of the settlements considered to be the zone of radioactive pollution to conditions of normal life activity: average irradiation dose of critical population group: 1.0 mSv per year and lower (AAED crit; decrease of radionuclide soil contamination density to the level enabling to use the territory

  14. Comparison between the Suomi-NPP Day-Night Band and DMSP-OLS for Correlating Socio-Economic Variables at the Provincial Level in China

    Directory of Open Access Journals (Sweden)

    Xin Jing

    2015-12-01

    Full Text Available Nighttime light imagery offers a unique view of the Earth’s surface. In the past, the nighttime light data collected by the DMSP-OLS sensors have been used as an efficient means to correlate regional and global socio-economic activities. With the launch of the Suomi National Polar-orbiting Partnership (Suomi-NPP satellite in 2011, the day-night band (DNB of the Visible Infrared Imaging Radiometer Suite (VIIRS onboard represents a major advancement in nighttime imaging capabilities, because it surpasses its predecessor DMSP-OLS in radiometric accuracy, spatial resolution and geometric quality. In this paper, four variables (total night light, light area, average night light and log average night light are extracted from nighttime radiance data observed by the VIIRS-DNB composite in 2013 and nighttime digital number (DN data from the DMSP-OLS stable dataset in 2012, respectively, and correlated with 12 socio-economic parameters at the provincial level in mainland China during the corresponding period. Background noise of DNB composite data is removed using either a masking method or an optimal threshold method. In general, the correlation of these socio-economic data with the total night light and light area of VIIRS-DNB composite data is better than with the DMSP-OLS stable data. The correlations between total night light of denoised DNB composite data and built-up area, gross regional product (GRP and power consumption are higher than 0.9 and so are the correlations between the light area of denoised DNB composite data and city and town population, built-up area, GRP, power consumption and waste water discharge. However, the correlations of socio-economic data with the average night light and log average night light of VIIRS-DNB composite data are not as good as with the DMSP-OLS stable data. To quantitatively analyze the reasons for the correlation difference, a cubic regression method is developed to correct the saturation effect of the DMSP

  15. Using NPP-Suomi VIIRS I-band data to delineate high- and low-intensity burn areas for forest fires in interior Alaska

    Science.gov (United States)

    Waigl, C. F.; Prakash, A.; Stuefer, M.; Ichoku, C. M.

    2016-12-01

    The aim of this work is to present and evaluate an algorithm that generates near real-time fire detections suitable for use by fire and related hazard management agencies in Alaska. Our scheme offers benefits over available global products and is sensitive to low-intensity residual burns while at the same time avoiding common sources of false detections as they are observed in the Alaskan boreal forest, such as refective river banks and old fire scars. The algorithm is based on I-band brightness temperature data form the Visible Infrared Imaging Radiometer Suite (VIIRS) on the NOAA's NPP Suomi spacecraft. Using datasets covering the entire 2015 Alaska fire season, we first evaluate the performance of two global fire products: MOD14/MYD14, derived from the Moderate Resolution Imaging Spectroradiometer (MODIS), and the more recent global VIIRS I-band product. A comparison with the fire perimeter and properties data published by the Alaska Interagency Coordination Center (AICC) shows that both MODIS and VIIRS fire products successfully detect all fires larger than approx. 1000 hectares, with the VIIRS I-band product only moderately outperforming MOD14/MYD14. For smaller fires, the VIIRS I-band product offers higher detection likelihood, but still misses one fifth of the fire events overall. Furthermore, some daytime detections are missing, possibly due to processing difficulties or incomplete data transfer. Second, as an alternative, we present a simple algorithm that uses the normalized difference between the 3.74µm and 11.45 µm VIIRS-I band at-sensor brightness temperatures to map both low- and high-intensity burn areas. Such an approach has the advantage that it makes use of data that is available via the direct readout station operated by Geographic Information Network of Alaska (GINA). We apply this scheme to known Alaskan boreal forest fires and validate it using GIS data produced by fire management agencies, fire detections from near simultanous Landsat

  16. NPP ATMS Snowfall Rate Product

    Science.gov (United States)

    Meng, Huan; Ferraro, Ralph; Kongoli, Cezar; Wang, Nai-Yu; Dong, Jun; Zavodsky, Bradley; Yan, Banghua

    2015-01-01

    Passive microwave measurements at certain high frequencies are sensitive to the scattering effect of snow particles and can be utilized to retrieve snowfall properties. Some of the microwave sensors with snowfall sensitive channels are Advanced Microwave Sounding Unit (AMSU), Microwave Humidity Sounder (MHS) and Advance Technology Microwave Sounder (ATMS). ATMS is the follow-on sensor to AMSU and MHS. Currently, an AMSU and MHS based land snowfall rate (SFR) product is running operationally at NOAA/NESDIS. Based on the AMSU/MHS SFR, an ATMS SFR algorithm has been developed recently. The algorithm performs retrieval in three steps: snowfall detection, retrieval of cloud properties, and estimation of snow particle terminal velocity and snowfall rate. The snowfall detection component utilizes principal component analysis and a logistic regression model. The model employs a combination of temperature and water vapor sounding channels to detect the scattering signal from falling snow and derive the probability of snowfall (Kongoli et al., 2015). In addition, a set of NWP model based filters is also employed to improve the accuracy of snowfall detection. Cloud properties are retrieved using an inversion method with an iteration algorithm and a two-stream radiative transfer model (Yan et al., 2008). A method developed by Heymsfield and Westbrook (2010) is adopted to calculate snow particle terminal velocity. Finally, snowfall rate is computed by numerically solving a complex integral. NCEP CMORPH analysis has shown that integration of ATMS SFR has improved the performance of CMORPH-Snow. The ATMS SFR product is also being assessed at several NWS Weather Forecast Offices for its usefulness in weather forecast.

  17. Ocean Disposal Site Monitoring

    Science.gov (United States)

    EPA is responsible for managing all designated ocean disposal sites. Surveys are conducted to identify appropriate locations for ocean disposal sites and to monitor the impacts of regulated dumping at the disposal sites.

  18. Calculations of hydrogen transport for the simulation of a Sbo in the NPP-L V using the code CFD GASFLOW; Calculos de transporte de hidrogeno para la simulacion de un SBO en la CNLV usando el codigo CFD GASFLOW

    Energy Technology Data Exchange (ETDEWEB)

    Gomez T, A. M.; Xolocostli M, V. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Lopez M, R.; Filio L, C.; Mugica R, C. A. [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Jose Ma. Barragan No. 779, Col. Narvarte, 03020 Mexico D. F. (Mexico); Royl, P., E-mail: armando.gomez@inin.gob.mx [Karlsruhe Institute of Technology, Consultor, Hermann-von-Helmholtz-Platz, D-76344 Eggenstein -Leopoldshafen, Karlsruhe (Germany)

    2013-10-15

    The scenario of electric power total loss in the nuclear power plant of Laguna Verde (NPP-L V) has been analyzed using the code MELCOR previously, until reaching fault conditions of the primary container. A mitigation measure to avoid the loss of the primary contention is the realization of a venting toward the secondary contention (reactor building), however this measure bears the potential explosions occurrence risk when the hydrogen accumulated in the primary container with the oxygen of the reactor building atmosphere reacting. In this work a scenario has been supposed that considers the mentioned venting when the pressure of 4.5 kg/cm{sup 2} is reached in the primary container. The information for the hydrogen like an entrance fact is obtained of the MELCOR results and the hydrogen transport in both contentions is analyzed with the code CFD GASFLOW that allows predicting the detailed distribution of the hydrogen volumetric concentration and the possible detonation of flammability conditions in the reactor building. The results show that the venting will produce detonation conditions in the venting level (level 33) and flammability in the level of the recharge floor. The methodology here described constitutes the base of a detailed calculation system of this type of phenomena that can use to make safety evaluations in the NPP-L V on scenarios that include gases transport. (Author)

  19. International MODIS and AIRS Processing Package (IMAPP) Implementation of Infusion of Satellite Data into Environmental Applications-International (IDEA-I) for Air Quality Forecasts using Suomi-NPP, Terra and Aqua Aerosol Retrievals

    Science.gov (United States)

    Davies, J. E.; Strabala, K.; Pierce, R. B.; Huang, A.

    2016-12-01

    Fine mode aerosols play a significant role in public health through their impact on respiratory and cardiovascular disease. IDEA-I (Infusion of Satellite Data into Environmental Applications-International) is a real-time system for trajectory-based forecasts of aerosol dispersion that can assist in the prediction of poor air quality events. We released a direct broadcast version of IDEA-I for aerosol trajectory forecasts in June 2012 under the International MODIS and AIRS Processing Package (IMAPP). In January 2014 we updated this application with website software to display multi-satellite products. Now we have added VIIRS aerosols from Suomi National Polar-orbiting Partnership (S-NPP). IMAPP is a NASA-funded and freely-distributed software package developed at Space Science and Engineering Center of University of Wisconsin-Madison that has over 2,300 registered users worldwide. With IMAPP, any ground station capable of receiving direct broadcast from Terra or Aqua can produce calibrated and geolocated radiances and a suite of environmental products. These products include MODIS AOD required for IDEA-I. VIIRS AOD for IDEA-I can be generated by Community Satellite Processing Package (CSPP) VIIRS EDR Version 2.0 Software for Suomi NPP. CSPP is also developed and distributed by Space Science & Engineering Center. This presentation describes our updated IMAPP implementation of IDEA-I through an example of its operation in a region known for episodic poor air quality events.

  20. Hanford Site Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    Rinne, C.A.; Curry, R.H.; Hagan, J.W.; Seiler, S.W.; Sommer, D.J. (Westinghouse Hanford Co., Richland, WA (USA)); Yancey, E.F. (Pacific Northwest Lab., Richland, WA (USA))

    1990-01-01

    The Hanford Site Development Plan (Site Development Plan) is intended to guide the short- and long-range development and use of the Hanford Site. All acquisition, development, and permanent facility use at the Hanford Site will conform to the approved plan. The Site Development Plan also serves as the base document for all subsequent studies that involve use of facilities at the Site. This revision is an update of a previous plan. The executive summary presents the highlights of the five major topics covered in the Site Development Plan: general site information, existing conditions, planning analysis, Master Plan, and Five-Year Plan. 56 refs., 67 figs., 31 tabs.

  1. Expedition surveys of the sea water and atmospheric air radioactive contamination in the Russian Far Eastern coastal areas and in the North- Western Pacific in connection with accident at the 'Fukushima-1' NPP

    Energy Technology Data Exchange (ETDEWEB)

    Nikitin, Aleksandr; Shershakov, Viacheslav; Artemev, Georgii [Research and Production Association ' Typhoon' (RPA ' Typhoon' ), Obninsk, Kaluga Region (Russian Federation); Ramzaev, Valery [Ramzaev Saint-Petersburg Research Institute of Radiation Hygiene, Saint-Petersburg (Russian Federation); Osokin, Vladimir [V.G.Khlopin Radium institute, Saint-Petersburg (Russian Federation); Sevastianov, Aleksandr [Far Eastern Regional Hydrometeorological Research Institute, Vladivostok (Russian Federation)

    2014-07-01

    In accordance with decision of the Russian Federation Federal Service on Hydro-meteorology and Environmental Monitoring (Roshydromet) on assessment of the sea water and atmospheric air radioactive contamination in the Russian coastal areas of the Far East in connection with accident at the 'Fukushima-1' NPP in Japan, two radioecological expedition surveys were conducted onboard of research vessels of the Far Eastern Regional Hydro-meteorological Research Institute (FERHRI) of Roshydromet in the Sea of Japan and in the North-Western Pacific (in the area adjacent to Kurile Islands and in the Kuroshio current selected area (coordinates 36 deg. 00'- 39 deg. 33' n., 146 deg. 33'- 150 deg. 00' e.): first survey in April-May 2011, onboard R/V 'Pavel Gordienko', second survey in August-September 2012, onboard R/V 'Akademik Shokalsky'. Both surveys were conducted under the Russian Geographical Society patronage. The leading Russian institutions dealing with ensuring of population radiation safety and protection of environment from radioactive contamination were enlisted to investigations. The following main observations were performed during the surveys: constant measurement of gamma-radiation dose rate above the sea surface; twenty-four hour sampling of atmospheric aerosols, sea water sampling from the surface and deep water horizons with preliminary concentrating of radionuclides for onboard gamma-spectrometry and for subsequent transportation to the shore laboratories for further analysis. During the expeditions, a real-time data were received onboard of research vessels which characterize impact of input of radioactive products of the 'Fukushima-1' NPP accident on radioactive contamination of environment existed on that period (these are onboard estimates of {sup 137}Cs and {sup 134}Cs concentrations in the sea water samples and {sup 131}I, {sup 137}Cs, {sup 134}Cs content in atmospheric aerosol samples, data

  2. SITE COMPREHENSIVE LISTING (CERCLIS) (Superfund) - NPL Sites

    Data.gov (United States)

    U.S. Environmental Protection Agency — National Priorities List (NPL) Sites - The Comprehensive Environmental Response, Compensation and Liability Information System (CERCLIS) (Superfund) Public Access...

  3. Superfund Site Information - Site Sampling Data

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes Superfund site-specific sampling information including location of samples, types of samples, and analytical chemistry characteristics of...

  4. SCHOOL SITE STANDARDS AND SITE SELECTION.

    Science.gov (United States)

    New York State Education Dept., Albany.

    THIS REPORT PRESENTS ELEMENTARY AND SECONDARY SCHOOL SITE DEVELOPMENT DATA COMPILED BY THE DIVISION OF EDUCATIONAL FACILITIES PLANNING, NEW YORK STATE EDUCATION DEPARTMENT. ENROLLMENT FIGURES USED REPRESENT THE ULTIMATE SIZE OF THE SCHOOLS. THE STANDARDS ARE MINIMUM FOR THE STATE OF NEW YORK WITH ELEMENTARY SCHOOL SITES BASED ON THREE ACRES PLUS…

  5. Nonlinear Time Domain Seismic Soil-Structure Interaction (SSI) Deep Soil Site Methodology Development

    Energy Technology Data Exchange (ETDEWEB)

    Spears, Robert Edward [Idaho National Lab. (INL), Idaho Falls, ID (United States); Coleman, Justin Leigh [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    methodology will be known as, NonLinear Soil-Structure Interaction (NLSSI). In general NLSSI analysis should provide a more accurate representation of the seismic demands on nuclear facilities their systems and components. INL, in collaboration with a Nuclear Power Plant Vender (NPP-V), will develop a generic Nuclear Power Plant (NPP) structural design to be used in development of the methodology and for comparison with SASSI. This generic NPP design has been evaluated for the INL soil site because of the ease of access and quality of the site specific data. It is now being evaluated for a second site at Vogtle which is located approximately 15 miles East-Northeast of Waynesboro, Georgia and adjacent to Savanna River. The Vogtle site consists of many soil layers spanning down to a depth of 1058 feet. The reason that two soil sites are chosen is to demonstrate the methodology across multiple soil sites. The project will drive the models (soil and structure) using successively increasing acceleration time histories with amplitudes. The models will be run in time domain codes such as ABAQUS, LS-DYNA, and/or ESSI and compared with the same models run in SASSI. The project is focused on developing and documenting a method for performing time domain, non-linear seismic soil structure interaction (SSI) analysis. Development of this method will provide the Department of Energy (DOE) and industry with another tool to perform seismic SSI analysis.

  6. Probabilistic Risk Assessment of Cask Drop Accident during On-site Spent Nuclear Fuel Transportation

    Energy Technology Data Exchange (ETDEWEB)

    Ham, Jae Hyun; Christian, Robby; Momani, Belal Al; Kang, Hyun Gook [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    There are two ways to transfer the SNF from a site to other site, one is land transportation and the other is maritime transportation. Maritime transportation might be used because this way uses more safe route which is far from populated area. The whole transportation process can be divided in two parts: transferring the SNF between SNP and wharf in-Nuclear Power Plant (NPP) site by truck, and transferring the SNF from the wharf to the other wharf by ship. In this research, on-site SNF transportation between SNP and wharf was considered. Two kinds of single accident can occur during this type of SNF transportation, impact and fire, caused by internal events and external events. In this research, PRA of cask drop accident during onsite SNF transportation was done, risk to a person (mSv/person) from a case with specific conditions was calculated. In every 11 FEM simulation drop cases, FDR is 1 even the fuel assemblies are located inside of the cask. It is a quite larger value for all cases than the results with similar drop condition from the reports which covers the PRA on cask storage system. Because different from previous reports, subsequent impact was considered. Like in figure 8, accelerations which are used to calculate the FDR has extremely higher values in subsequent impact than the first impact for all SNF assemblies.

  7. The full GHG balance over two crop rotations at an agricultural site near Gebesee, Thuringia, Germany

    Science.gov (United States)

    Kutsch, Werner Leo; Brümmer, Christian; Don, Catharina; Dechow, Rene; Fuß, Roland; Freibauer, Annette; Schulze, Ernst-Detlef; Kolle, Olaf; Ziegler, Waldemar

    2013-04-01

    Gebesee in Thuringia is the eldest cropland eddy covariance (EC) site in Europe. The site has been part of CarboEurope, NitroEurope and IMECC and has been selected to be one of the German Level 1 sites within the European research infrastructure ICOS. Continuous measurements of NEE by EC, NPP by regular harvesting, lateral in- and outputs of carbon and nitrogen as well as climatic parameters have been conducted since 2001. Automated chamber measurements of N2O and CH4 were conducted since 2007. Fluxes of these greenhouse gases (GHG) for the years 2001 - 2006 were calculated based on a Fuzzy Logic model calibrated by means of the chamber measurements. In this study we present NEE, NBP and full GHG balances of over two rotation periods (2001 - 2004 and 2005 - 2009, respectively) comprising four times winter wheat, two times potatoes and one cropping period of oil seed rape, sugar beet and barley each. The GHG balance is dominated by moderate losses of soil organic matter (~120 +/- 50 g C m-2 y-1) and by N2O emissions of about 0.17 g N2O-N m-2 y-1 (50 g C-eq m-2 y-1). The on-site emissions of GHG balance about 43 % of the harvested carbon.

  8. Analysis of the transient of shot of turbine in NPP Peach Bottom with the TRAC-BF1/NEM attached codes; Analisis del transitorio de disparo de turbina en C.N. Peach Bottom con los codigos acoplados TRAC-BF1/NEM

    Energy Technology Data Exchange (ETDEWEB)

    Barrachina, T.; Miro, R.; Verdu, G.; Gonzalez, P.; Concejal, A.; Melera, J.

    2011-07-01

    This article shows the simulation results of the transient of turbine in NPP Peach Bottom using the attached codes TRAC-BF1/NEM outcomes using one-dimensional Kinetics are compared with those obtained using three dimensional kinetics with the NEM code.

  9. NPL Site Boundaries

    Data.gov (United States)

    U.S. Environmental Protection Agency — The National Priorities List (NPL) is a list published by EPA of Superfund sites. A site must be added to this list before remediation can begin under Superfund. The...

  10. NPL Site Locations

    Data.gov (United States)

    U.S. Environmental Protection Agency — The National Priorities List (NPL) is a list published by EPA of Superfund sites. A site must be added to this list before remediation can begin under Superfund. The...

  11. Site Area Boundaries

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset consists of site boundaries from multiple Superfund sites in U.S. EPA Region 8. These data were acquired from multiple sources at different times and...

  12. NPL Site Locations

    Data.gov (United States)

    U.S. Environmental Protection Agency — The National Priorities List (NPL) is a list published by EPA of Superfund sites. A site must be added to this list before remediation can begin under Superfund. The...

  13. Site Area Boundaries

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset consists of site boundaries from multiple Superfund sites in U.S. EPA Region 8. These data were acquired from multiple sources at different times and...

  14. 阳江核电厂安全壳钢衬里模块化施工方案研究及应用%Research and Application of Modularized Scheme of Containment Liner of Yangjiang NPP Reactor Building

    Institute of Scientific and Technical Information of China (English)

    鲁勤武; 郝坚; 张淑霞; 郭俊营; 蔡晖

    2011-01-01

    核电厂的安全壳钢衬里模块实施方案中的模块方案、吊具结构、起重设备的实施研究及在阳江核电厂3#机组项目上的成功示范应用,为在核电在建项目上推行安全壳钢衬里模块化建造技术提供了工程实践指导.%Research of the modularized scheme in the design, spatial grid structure spreader and crane, and its successful application in Yangjiang NPP project 3# unit provided a reference for the modularized construction of containment liner in the nuclear construction projects.

  15. Neuro-Physiological Psychotherapy (NPP): The development and application of an integrative, wrap-around service and treatment programme for maltreated children placed in adoptive and foster care placements.

    Science.gov (United States)

    Vaughan, Jay; McCullough, Elaine; Burnell, Alan

    2016-10-01

    This article describes the development and application of a wrap-around, multidisciplinary, brain-based, developmental and attachment-focussed intervention for children who have experienced significant trauma in the context of their early life. It outlines the presentation of the children and families who are referred to the service and the model of treatment that they receive. In doing so, it identifies the core components underpinning Neuro-Physiological Psychotherapy (NPP) and links the application of the integrative model to research and practice in the field of neuroscience and attachment and to the use of therapeutic approaches that are beneficial to maltreated children and their adoptive parents. It highlights the need for a neuro-sequential approach that impacts all aspects of the child's life in the effort to redress the impact of developmental trauma with the aim of improving their overall functioning and their ability to develop healthy relationships into the future. © The Author(s) 2016.

  16. Discussion About Application of Hot Super-Compaction Process for Low Intermediate Level Spent Resin From NPP%核电站低中放废树脂热态超压处理技术应用探讨

    Institute of Scientific and Technical Information of China (English)

    周焱; 张海峰

    2012-01-01

    介绍一种从国外引进并首次应用于国内核电站的低中放废树脂有效减容处理技术——热态超压(超级压缩)处理技术,探讨了该技术在处理核电站低中放废树脂中的优势和今后需进一步关注的技术问题.%A new volume-reduction technology, hot super-compaction process for spent resin treatment was presented, which was introduced from other country and initially applied in domestic nuclear power plant (NPP). Advantages of hot super-compaction process for low intermediate level spent resin treatment and some technical issues needed to be focused on in future were discussed.

  17. Development of the Database of Cables of Almaraz NPP as the fire deterministic analysis support; Elaboracion de la base de datos de cables de C.N. Almaraz como soporte de los analisis deterministas de incendios

    Energy Technology Data Exchange (ETDEWEB)

    Villar Sanchez, T.; Fernandez Ramos, P.; Garcia Romero, A.; Fuente Prieto, I.

    2013-07-01

    Within the process of transition to the NFPA-805, it requires a deterministic analysis of fire, for which it is necessary, on the one hand, the identification and location of the cables and equipment necessary and important for achieve and maintain safe, and stop on the other hand, the analysis of the different types of spurious multiple, based on the methodology described in the NEI 00-01 Rev. 2. the base Almaraz NPP cables data it collects this information and is a fundamental tool to analyze the capacity of the plant to achieve the stop safe in case of fire, which allows you to find possible vulnerabilities and take appropriate measures to improve the security of it.

  18. Drupal 7 Multilingual Sites

    CERN Document Server

    Pol, Kristen

    2012-01-01

    A practical book with plenty of screenshots to guide you through the many features of multilingual Drupal. A demo ecommerce site is provided if you want to practice on a sample site, although you can apply the techniques learnt in the book directly to your site too. Any Drupal users who know the basics of building a Drupal site and are familiar with the Drupal UI, will benefit from this book. No previous knowledge of localization or internationalization is required.

  19. The Greenland Ramsar Sites

    DEFF Research Database (Denmark)

    Egevang, C.; Boertmann, D.

    The eleven Ramsar sites in Greenland are reviewed in terms of their status as habitats for waterbirds and other fauna. Management and monitoring is proposed, as well as revisions of their boundaries. A number of potential new Ramsar sites are described......The eleven Ramsar sites in Greenland are reviewed in terms of their status as habitats for waterbirds and other fauna. Management and monitoring is proposed, as well as revisions of their boundaries. A number of potential new Ramsar sites are described...

  20. 中核运行二厂大修辐射防护管理经验%The Radiation Protection Management Experience for Refueling Outage of NPP 2, CNNC Nuclear Power Operations Management Limited Company

    Institute of Scientific and Technical Information of China (English)

    倪伟; 陈高飞; 刘杰; 稂其良

    2013-01-01

    Since commercial operation in 2002, the NPP 2 of CNNO has been safe in operation for twelve years,and finished RP control successfuly in the 22 refueling outages. During the twelve years'operation, the RP management system was established and developed constantly, it also made good achievements in RP supervision and management. The author summarized the relevant RP management experience of refueling outages of CNNO Qinshan NPP 2, introduced the RP control actions for each stage of refueling outage, and discussed the key points and difficulty of RP control in refueling outage.%中核核电运行管理有限公司二厂(简称中核运行二厂)自2002年商业运行以来,已安全运行12个年头,顺利完成了22次换料大修的辐射安全控制,在12年的生产实践中,建立并不断完善了大修辐射管理体系,在历次大修中较好的发挥了辐射安全监督与管理的职能。本文总结了中核运行二厂大修辐射防护管理经验,系统地介绍了大修各阶段辐射防护控制所采取的行动,并对大修辐射防护管理的重点及难点进行探讨。

  1. 中国百万千瓦级核电站严重事故下堆芯损伤评价%Core Damage Assessment for Chinese 1 000 MWe NPP Under Severe Accident Conditions

    Institute of Scientific and Technical Information of China (English)

    魏玮; 周志伟

    2011-01-01

    By simulation analysis with the integral severe accident analysis code MELCOR1.8.5, the applicability of the Westinghouse Owners Group Core Damage Assessment Guidance (CDAG) to estimate the status and extent of the core damage in the early phase of the accident for a typical Chinese 1 000 MWe NPP was investigated. The preliminary analysis results show that CDAG can reasonably evaluate the core damage status and extent for the 1 000 MWe NPP in a loss of coolant accident (LOCA) without mitigation measures. The insights gained from the present study are of significant values for further studing and validating the comprehensive assessment capability and applicability of the CDAG, and for advancing the establishment of the severe accident management guidelines (SAMGs) of existing plants in China.%应用-体化严重事故分析程序MELCORL 8.5进行模拟分析,研究了由西屋公司制定、经美国NRC(Nuclear Regulatory Commission)认证的"堆芯损伤评价导则(CDAG )"应用于中国百万千瓦级核电站在严重事故初期评价堆芯损伤状态和程度的有效性.初步分析结果表明,CDAG可较好地评价百万千瓦级核电站无缓解措施的冷却剂丧失事故(LOCA)堆芯损伤状况和损伤程度,对进-步研究和验证CDAG的综合评价能力和适用性、推进现有核电厂建立严重事故管理导则具有重要的参考价值.

  2. Tomography finds waste sites

    Science.gov (United States)

    Bush, Susan M.

    Geophysical diffraction tomography (GDT), a remote sensing method, is being developed for hazardous waste site characterization by researchers at Oak Ridge National Laboratory, Tenn., with the support of the U.S. Army Toxic and Hazardous Materials Agency, Aberdeen Proving Ground, Md.More accurate assessment of hazardous sites translates into more efficient and less costly cleanup efforts by defining parameters such as waste site boundaries, geophysical site characteristics, buried container leakage, and hazardous material migration. Remote sensing devices eliminate the potential for environmental damage, safety hazards, or high costs associated with intrusive site characterization techniques.

  3. Olkiluoto site description 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties.

  4. Site Environmental Report, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    The Site Environmental Report (SER) is prepared annually in accordance with DOE Order 5400.1, ``General Environmental Protection Program.`` This 1993 SER provides the general public as well as scientists and engineers with the results from the site`s ongoing Environmental Monitoring Program. Also included in this report is information concerning the site`s progress toward achieving full compliance with requirements set forth by DOE, US Environmental Protection Agency (USEPA), and Ohio EPA (OEPA). For some readers, the highlights provided in the Executive Summary may provide sufficient information. Many readers, however, may wish to read more detailed descriptions of the information than those which are presented here.

  5. Net Biome Productivity of different land use at the sites of the Tharandt cluster

    Science.gov (United States)

    Grünwald, T.; Prescher, A.-K.; Bernhofer, Ch.

    2009-04-01

    Within the Tharandt cluster there are 5 flux monitoring sites including 3 CARBOEUROPE main sites. The CARBOEUROPE sites cover typical land use of the region (spruce [monitored since 1996], grassland [since 2003], cropland [since 2004]). For all sites estimates of the Net Biome Productivity (NBP) and its uncertainty have been derived using Net Ecosystem Productivity (NEP) based on the EC measurements and C exports and imports on an annual basis. The crop site is a small C sink (NEP of 30-110gCm-2a-1) only. The annual NEP values are dependent on the cultivated crop species (winter or summer crop). Including C export (harvest) and C import (manure spreading) lead to a considerable C source of 270-540gCm-2a-1. Organic fertilisation (C import) has a strong impact on NBP values expressed in a reduced annual net carbon source. Also, the largest interannual differences of NBP values are found at this site - mainly induced by the existence and the amount of a carbon import due to organic fertilisation. Management practices affect the NBP in a sensitive way at this crop site. Each crop shows a higher C export due to harvest than the annual NEP. To validate the calculated C equivalent using harvested grain biomass modelled NPP values are available. Uncertainty ranges of C export, C import and NBP as well as the grassland and spruce NBP (for comparison) are also stated. In general, land use and management strongly affect the annual NBP of non-forested ecosystems especially. So, this is the second main driver of the C budget besides the interannual variability in meteorological conditions and water availability with its influence on NEP, GPP and TER.

  6. Site Development Planning Handbook

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-01-01

    The Handbook provides facility managers and site planners at DOE organizations responsible for planning site developments and facilities utilization a step-by-step planning checklist to ensure that planners at each site are focusing on Department-wide goals and objectives. It begins with a brief discussion of a site development-by-objectives program design to promote, recognize, and implement opportunities for improvements in site utilization through planning. Additional information is included on: assembling existing data, plans, programs, and procedures; establishing realistic objectives; identifying site problems, opportunities; and development needs; determining priorities among development needs; developing short and long-range plans; choosing the right development solutions and meeting minimum legal site restrictions; presenting the plan; implementing elements of the plan; monitoring and reporting plan status; and modifying development program plans. (MCW)

  7. Hanford Site Comprehensive site Compliance Evaluation Report

    Energy Technology Data Exchange (ETDEWEB)

    Tollefson, K.S.

    1997-08-05

    This document is the second annual submittal by WHC, ICF/KH, PNL and BHI and contains the results of inspections of the stormwater outfalls listed in the Hanford Site Storm Water Pollution Prevention Plan (SWPPP) (WHC 1993a) as required by General Permit No. WA-R-00-000F (WA-R-00-A17F): This report also describes the methods used to conduct the Storm Water Comprehensive Site Compliance Evaluation, as required in Part IV, Section D, {ampersand} C of the General Permit, summarizes the results of the compliance evaluation, and documents significant leaks and spills.

  8. CELT site testing program

    Science.gov (United States)

    Schoeck, Matthias; Erasmus, D. Andre; Djorgovski, S. George; Chanan, Gary A.; Nelson, Jerry E.

    2003-01-01

    The California Extremely Large Telescope, CELT, is a proposed 30-m telescope. Choosing the best possible site for CELT is essential in order to extract the best science from the observations and to reduce the complexity of the telescope. Site selection is therefore currently one of the most critical pacing items of the CELT project. In this paper, we first present selected results from a survey of the atmospheric transparency at optical and infrared wavelengths over the southwestern USA and northern Mexico using satellite data. Results of a similar study of South America have been reported elsewhere. These studies will serve as the pre-selection criterion of the sites at which we will perform on-site testing. We then describe the current status of on-site turbulence evaluation efforts and the future plans of the CELT site testing program.

  9. Hazardous waste sites

    Energy Technology Data Exchange (ETDEWEB)

    Hembra, R.L

    1989-01-01

    This report has found that while most states have accomplished few or no cleanups of sites contaminated by hazardous waste, some have enacted tough cleanup laws, committed relatively large resources to the cleanup effort, and achieved considerable results. At the 17 cleanup sites analyzed, state cleanup plans were generally stringent. However, no federal standards have been set for over half of the contaminants found at these sites. For 11 sites, the states set cleanup levels without doing formal risk assessments. Also, most states reviewed did not consider the full range of alternatives EPA requires. Most states have not shown that they can effectively clean up large, hazardous waste sites. This report recommends that EPA turn sites targeted for cleanup over to the states only if there are adequate controls and oversight.

  10. Site environmental programs

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, J.W.; Hanf, R.W.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report summarizes the site environmental programs. Effluent monitoring and environmental surveillance programs monitor for impacts from operations in several areas. The first area consists of the point of possible release into the environment. The second area consists of possible contamination adjacent to DOE facilities, and the third area is the general environment both on and off the site.

  11. 1994 Site environmental report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The Fernald site is a Department of Energy (DOE)-owned facility that produced high-quality uranium metals for military defense for nearly 40 years. DOE suspended production at the site in 1989 and formally ended production in 1991. Although production activities have ceased, the site continues to examine the air and liquid pathways as possible routes through which pollutants from past operations and current remedial activities may leave the site. The Site Environmental Report (SER) is prepared annually in accordance with DOE Order 5400.1, General Environmental Protection Program. This 1994 SER provides the general public as well as scientists and engineers with the results from the site`s ongoing Environmental Monitoring Program. Also included in this report is information concerning the site`s progress toward achieving full compliance with requirements set forth by DOE, U.S. Environmental Protection Agency (USEPA), and Ohio EPA (OEPA). For some readers, the highlights provided in this Executive Summary may provide sufficient information. Many readers, however, may wish to read more detailed descriptions of the information than those which are presented here. All information presented in this summary is discussed more fully in the main body of this report.

  12. Region 9 Removal Sites

    Data.gov (United States)

    U.S. Environmental Protection Agency — Point geospatial dataset representing locations of CERCLA (Superfund) Removal sites. CERCLA (Comprehensive Environmental Response, Compensation, and Liability Act)...

  13. SITE-94. Mineralogy of the Aespoe site

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Karin [Chalmers Univ. of Technology, Goeteborg (Sweden). Technical Environmental Planning

    1996-12-01

    The water composition has several impacts on the repository. It will influence the behaviour of the engineered materials (e.g. corrosion). It may also determine the possible solubility and speciation of released radionuclides. It also acts as a transport medium for the released elements. The groundwater composition and the potential development of the composition due to the presence of the repository as well as due to external variations is thus an important issue in a safety analysis. The development of the groundwater composition is strongly dependent on reactions with the minerals present in water bearing fractures. Here equilibrium chemistry may be of importance, but also reaction kinetics is important to the long-term behaviour. Within the SITE-94 project, a safety analysis is performed for the conditions at the Aespoe site. The mineralogy of the area has been evaluated from drill cores at various places at the site. In this report a recommendation for selection of mineralogy to be used in geochemical modelling of the repository is given. Calcite and iron containing minerals dominate the fracture filling mineralogy at the Aespoe site. Some typical fracture filling mineralogies may be identified in the fractures: epidote, chlorite, calcite, hematite, some illite/smectite + quartz, fluorite, pyrite and goethite. In addition to these a number of minor minerals are found in the fractures. Uncertainties in the fracture filling data may be due to problems when taking out the drill cores. Drilling water may remove important clay minerals and sealed fractures may be reopened mechanically and treated as water conducting fractures. The problem of determining the variability of the mineralogy along the flow paths also remains. This problem will never be solved when the investigation is performed by drilling investigation holes

  14. Targeting the active site of the placental isozyme of alkaline phosphatase by phage-displayed scFv antibodies selected by a specific uncompetitive inhibitor

    Directory of Open Access Journals (Sweden)

    Kala Mrinalini

    2005-12-01

    Full Text Available Abstract Background The isozymes of alkaline phosphatase, the tissue non-specific, intestinal and placental, have similar properties and a high degree of identity. The placental isozyme (PLAP is an oncofetal antigen expressed in several malignancies including choriocarcinoma, seminoma and ovarian carcinoma. We had earlier attempted to isolate PLAP-specific scFv from a synthetic human immunoglobulin library but were unable to do so, presumably because of the similarity between the isozymes. In this work, we have employed a PLAP-specific uncompetitive inhibitor, L-Phe-Gly-Gly, to select isozyme specific scFvs. An uncompetitive inhibitor binds to the enzyme in the presence of substrate and stabilizes the enzyme-substrate complex. Several uncompetitive inhibitors have varying degrees of isozyme specificity for human alkaline phosphatase isozymes. A specific uncompetitive inhibitor would be able to unmask conformational differences between the otherwise very similar molecules. Also, such inhibitors would be directed to regions at/close to the active site of the enzyme. In this work, the library was first incubated with PLAP and the bound clones then eluted by incubation with L-Phe-Gly-Gly along with the substrate, para-nitro phenyl phosphate (pNPP. The scFvs were then studied with regard to the biochemical modulation of their binding, isozyme specificity and effect on enzyme activity. Results Of 13 clones studied initially, the binding of 9 was inhibited by L-Phe-Gly-Gly (with pNPP and 2 clones were inhibited by pNPP alone. Two clones had absolute and 2 clones had partial specificity to PLAP. Two clones were cross-reactive with only one other isozyme. Three scFv clones, having an accessible His6-tag, were purified and studied for their modulation of enzyme activity. All the three scFvs inhibited PLAP activity with the kinetics of competitive inhibition. Cell ELISA could demonstrate binding of the specific scFvs to the cell surface expressed PLAP

  15. Preliminary Site Characterization Report, Rulsion Site, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    This report is a summary of environmental information gathered during a review of the documents pertaining to Project Rulison and interviews with personnel who worked on the project. Project Rulison was part of Operation Plowshare (a program designed to explore peaceful uses for nuclear devices). The project consisted of detonating a 43-kiloton nuclear device on September 10, 1969, in western Colorado to stimulate natural gas production. Following the detonation, a reentry well was drilled and several gas production tests were conducted. The reentry well was shut-in after the last gas production test and was held in standby condition until the general cleanup was undertaken in 1972. A final cleanup was conducted after the emplacement and testing wells were plugged in 1976. However, some surface radiologic contamination resulted from decontamination of the drilling equipment and fallout from the gas flaring during drilling operations. With the exception of the drilling effluent pond, all surface contamination at the Rulison Site was removed during the cleanup operations. All mudpits and other excavations were backfilled, and both upper and lower drilling pads were leveled and dressed. This report provides information regarding known or suspected areas of contamination, previous cleanup activities, analytical results, a review of the regulatory status, the site`s physical environment, and future recommendations for Project Ruhson. Based on this research, several potential areas of contamination have been identified. These include the drilling effluent pond and mudpits used during drilling operations. In addition, contamination could migrate in the gas horizon.

  16. Site characterization handbook

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    This Handbook discusses both management and technical elements that should be considered in developing a comprehensive site characterization program. Management elements typical of any project of a comparable magnitude and complexity are combined with a discussion of strategies specific to site characterization. Information specific to the technical elements involved in site characterization is based on guidance published by the Nuclear Regulatory Commission (NRC) with respect to licensing requirements for LLW disposal facilities. The objective of this Handbook is to provide a reference for both NRC Agreement States and non-Agreement States for use in developing a comprehensive site characterization program that meets the specific objectives of the State and/or site developer/licensee. Each site characterization program will vary depending on the objectives, licensing requirements, schedules/budgets, physical characteristics of the site, proposed facility design, and the specific concerns raised by government agencies and the public. Therefore, the Handbook is not a prescriptive guide to site characterization. 18 refs., 6 figs.

  17. Site characterization handbook

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    This Handbook discusses both management and technical elements that should be considered in developing a comprehensive site characterization program. Management elements typical of any project of a comparable magnitude and complexity are combined with a discussion of strategies specific to site characterization. Information specific to the technical elements involved in site characterization is based on guidance published by the Nuclear Regulatory Commission (NRC) with respect to licensing requirements for LLW disposal facilities. The objective of this Handbook is to provide a reference for both NRC Agreement States and non-Agreement States for use in developing a comprehensive site characterization program that meets the specific objectives of the State and/or site developer/licensee. Each site characterization program will vary depending on the objectives, licensing requirements, schedules/budgets, physical characteristics of the site, proposed facility design, and the specific concerns raised by government agencies and the public. Therefore, the Handbook is not a prescriptive guide to site characterization. 18 refs., 6 figs.

  18. The Greenland Ramsar Sites

    DEFF Research Database (Denmark)

    Egevang, C.; Boertmann, D.

    The eleven Ramsar sites in Greenland are reviewed in terms of their status as habitats for waterbirds and other fauna. Management and monitoring is proposed, as well as revisions of their boundaries. A number of potential new Ramsar sites are described...

  19. Site-Specific Innovation

    DEFF Research Database (Denmark)

    Reeh, Henrik; Hemmersam, Peter

    2015-01-01

    Currently, cities across the Northern European region are actively redeveloping their former industrial harbours. Indeed, harbours areas are essential in the long-term transition from industrial to information and experience societies; harbours are becoming sites for new businesses and residences...... question is how innovation may contribute to urban life and site-specific qualities....

  20. Site decommissioning management plan

    Energy Technology Data Exchange (ETDEWEB)

    Fauver, D.N.; Austin, J.H.; Johnson, T.C.; Weber, M.F.; Cardile, F.P.; Martin, D.E.; Caniano, R.J.; Kinneman, J.D.

    1993-10-01

    The Nuclear Regulatory Commission (NRC) staff has identified 48 sites contaminated with radioactive material that require special attention to ensure timely decommissioning. While none of these sites represent an immediate threat to public health and safety they have contamination that exceeds existing NRC criteria for unrestricted use. All of these sites require some degree of remediation, and several involve regulatory issues that must be addressed by the Commission before they can be released for unrestricted use and the applicable licenses terminated. This report contains the NRC staff`s strategy for addressing the technical, legal, and policy issues affecting the timely decommissioning of the 48 sites and describes the status of decommissioning activities at the sites.

  1. Nitrogen Dynamics of the Savanna Flux Site at Skukuza, Kruger National Park.

    Science.gov (United States)

    Woghiren, A. J.; Scholes, M.

    2001-12-01

    The SAFARI 2000 campaign aims at validating satellite-based estimates of photosynthesis and net primary productivity (NPP). The Skukuza site has two vegetation types, a Combretum (broad-leafed) savanna and an Acacia (fine-leafed) savanna. Since it is expected that these two vegetation types may have markedly different responses to global climate change, it is an ideal site for the Earth observing systems (EOS) validation experiment. NPP estimates need to be explained and supported using corresponding data on the N (nitrogen) budgets for the site. Plants capable of nitrogen fixation usually had higher % N and lower \\delta15N signatures than their non-nitrogen-fixing counterparts. Most species had isotopically enriched signatures relative to the standard, which was air. The mean enrichments for the legumes varied from -1.76 to 3.32%, while that of the non-legumes ranged from 3.02 to 7.08%. In the herbaceous layer, Stylosanthes fruticosa and Macrotyloma maranguense had the highest fixation rates, with 84% and 41% being contributed by each species respectively (4.9 - 6.8 kg N ha-1 yr-1 is fixed in this layer). Since these species occurred in dense patches at the broad-leafed site, it was assumed that this was the contribution of N2 fixation to this savanna. The dominant N2 fixing tree was Acacia nilotica, with 50 % of its N being fixed. Trees at the fine-leafed site fixed between 2.9 - 5.5 kg N ha-1 yr-1, while herbaceous legumes contributed 4.9 - 6.8 kg N ha-1 yr-1. Nitrogen mineralisation is seasonal, with particularly high rates of mineralisation in spring. In winter, NH4+ dominates at the fine-leafed site, when it is scarcely detectable at the broad-leafed site. On the other hand, nitrate prevails in summer at the fine-leafed site, while it is being immobilised at the broad-leafed site. In contrast to another South African savanna, NH4+ is detected in large quantities (0.85 μ g N g-1 dry soil day-1) at both sites during summer. The nitrification rates are

  2. Lunar Polar Landing Sites

    Science.gov (United States)

    Kamps, Oscar; Foing, Bernard H.; Flahaut, Jessica

    2016-07-01

    An important step for a scientific mission is to assess on where the mission should be conducted. This study on landing site selection focuses on a mission to the poles of the Moon where an in-situ mission should be conducted to answer the questions with respect to volatiles and ices. The European interest for a mission to the poles of the Moon is presented in the mission concept called Heracles. This mission would be a tele-operated, sample return mission where astronauts will controlling a rover from an Orion capsule in cislunar orbit. The primary selection of landing sites was based on the scientific interest of areas near the poles. The maximum temperature map from Diviner was used to select sites where CO^2¬ should always be stable. This means that the maximum temperature is lower than 54K which is the sublimation temperature for CO^2¬ in lunar atmospheric pressure. Around these areas 14 potential regions of interest were selected. Further selection was based on the epoch of the surface in these regions of interest. It was thought that it would be of high scientific value if sites are sampled which have another epoch than already sampled by one of the Apollo or Luna missions. Only 6 sites on both North as South Pole could contain stable CO^2 ¬and were older than (Pre-)Necterian. Before a landing site and rover traverse was planned these six sites were compared on their accessibility of the areas which could contain stable CO^2. It was assumed that slope lower than 20^o is doable to rove. Eventually Amundsen and Rozhdestvenskiy West were selected as regions of interest. Assumptions for selecting landing sites was that area should have a slope lower than 5^o, a diameter of 1km, in partial illuminated area, and should not be isolated but inside an area which is in previous steps marked as accessible area to rove. By using multiple tools in ArcGIS it is possible to present the area's which were marked as potential landing sites. The closest potential landing

  3. SITE-94. Radionuclide solubilities for SITE-94

    Energy Technology Data Exchange (ETDEWEB)

    Arthur, R.; Apted, M. [QuantiSci, Denver, CO (United States)

    1996-12-01

    In this report, solubility constraints are evaluated on radioelement source-term concentrations supporting the SITE-94 performance assessment. Solubility models are based on heterogeneous-equilibrium, mass- and charge-balance constraints incorporated into the EQ3/6 geochemical software package, which is used to calculate the aqueous speciation behavior and solubilities of U, Th, Pu, Np, Am, Ni, Ra, Se, Sn, Sr, Tc and Zr in site groundwaters and near-field solutions. The chemical evolution of the near field is approximated using EQ3/6 in terms of limiting conditions at equilibrium, or steady state, in three closed systems representing fully saturated bentonite, Fe{sup o} corrosion products of the canister, and spent fuel. The calculations consider both low-temperature (15 deg C) and high-temperature (80 deg C) conditions in the near field, and the existence of either reducing or strongly oxidizing conditions in each of the bentonite, canister, and spent-fuel barriers. Heterogeneities in site characteristics are evaluated through consideration of a range of initial groundwaters and their interactions with engineered barriers. Aqueous speciation models for many radioelements are constrained by thermodynamic data that are estimated with varying degrees of accuracy. An important question, however, is how accurate do these models need to be for purposes of estimating source-term concentrations? For example, it is unrealistic to expect a high degree of accuracy in speciation models if such models predict solubilities that are below the analytical detection limit for a given radioelement. From a practical standpoint, such models are irrelevant if calculated solubilities cannot be tested by direct comparison to experimental data. In the absence of models that are both accurate and relevant for conditions of interest, the detection limit could define a pragmatic upper limit on radioelement solubility 56 refs, 25 tabs, 10 figs

  4. Site Calibration report

    DEFF Research Database (Denmark)

    Gómez Arranz, Paula; Vesth, Allan

    This report describes the site calibration carried out at Østerild, during a given period. The site calibration was performed with two Windcube WLS7 (v1) lidars at ten measurements heights. The lidar is not a sensor approved by the current version of the IEC 61400-12-1 [1] and therefore the site...... calibration with lidars does not comply with the standard. However, the measurements are carried out following the guidelines of IEC 61400-12-1 where possible, but with some deviations presented in the following chapters....

  5. Adaptation of the implementation of surveillance of the general discharge of the Trillo NPP, and on-line access to the data; Adaptacion de la Instrumentacion de vigilancia del vertido general de la CN Trillo, y acceso on-line a los datos

    Energy Technology Data Exchange (ETDEWEB)

    Caler Rubio, R.; Escribano Blanco, N.

    2013-07-01

    The object of this work is to make the necessary modifications in the implementation of surveillance of the general of the Trillo NPP dumping to comply with the requirements by the Confederacion Hidrografica del Tajo in the review of the authorization of discharges CHT-ATT-000045, through the installation of new analyzers of physicochemical parameters on discharge of waste from Central canal, as well as the implementation of a system of real time data access.

  6. Outdoor Recreation Sites Inventory

    Data.gov (United States)

    Vermont Center for Geographic Information — The RECSITES data layer contains a wide range of recreational sites in Vermont. This point data layer includes parks, ski areas, boat access points, and many other...

  7. Programming for SITE.

    Science.gov (United States)

    Mody, Bella

    1979-01-01

    Describes the Satellite Instructional Television Experiment (SITE) project in India during 1975-76, including programing patterns, formats, and audiences. Demonstrates that countries like India have the technical and managerial capability to design, operate, and maintain advanced communication technology. (JMF)

  8. Coal mine site reclamation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-02-15

    Coal mine sites can have significant effects on local environments. In addition to the physical disruption of land forms and ecosystems, mining can also leave behind a legacy of secondary detrimental effects due to leaching of acid and trace elements from discarded materials. This report looks at the remediation of both deep mine and opencast mine sites, covering reclamation methods, back-filling issues, drainage and restoration. Examples of national variations in the applicable legislation and in the definition of rehabilitation are compared. Ultimately, mine site rehabilitation should return sites to conditions where land forms, soils, hydrology, and flora and fauna are self-sustaining and compatible with surrounding land uses. Case studies are given to show what can be achieved and how some landscapes can actually be improved as a result of mining activity.

  9. Measuring site occupancy

    DEFF Research Database (Denmark)

    Rogowska-Wrzesinska, Adelina; Wojdyla, Katarzyna; Williamson, James

    2014-01-01

    Site occupancy is an extremely important aspect of quantification of protein modifications. Knowing the degree of modification of each oxidised cysteine residue is critical to understanding the biological role of these modifications. Yet modification site occupancy is very often overlooked, in part...... occupancy of the modification site. We show that, on one hand, heavily modified cysteines are not necessarily involved in the response to oxidative stress. On the other hand residues with low modification level can be dramatically affected by mild oxidative imbalance. We make use of high resolution mass...... peptides corresponding to 90 proteins. Only 6 modified peptides changed significantly under mild oxidative stress. Quantitative information allowed us to determine relative modification site occupancy of each identified modified residue and pin point heavily modified ones. The method proved to be precise...

  10. Water Quality Monitoring Sites

    Data.gov (United States)

    Vermont Center for Geographic Information — Water Quality Monitoring Site identifies locations across the state of Vermont where water quality data has been collected, including habitat, chemistry, fish and/or...

  11. Superfund Site Information

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes a number of individual data sets related to site-specific information for Superfund, which is governed under the Comprehensive Environmental...

  12. Summer Meal Sites

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Information pertaining to Summer Meal Sites, as collected by Citiparks in the City of Pittsburgh Department of Parks and Recreation. This dataset includes the...

  13. Jet Car Track Site

    Data.gov (United States)

    Federal Laboratory Consortium — Located in Lakehurst, New Jersey, the Jet Car Track Site supports jet cars with J57 engines and has a maximum jet car thrust of 42,000 pounds with a maximum speed of...

  14. 近百年全球草地生态系统净初级生产力时空动态对气候变化的响应%The NPP spatiotemporal variation of global grassland ecosystems in response to climate change over the past 100 years

    Institute of Scientific and Technical Information of China (English)

    刚成诚; 王钊齐; 杨悦; 陈奕兆; 张艳珍; 李建龙; 程积民

    2016-01-01

    气候变化是影响生态系统空间地理分布、结构和功能的主要因素。为了从长时间序列大空间尺度上了解气候变化对草地生态系统的影响及其反馈机制,本研究利用综合顺序分类法及分段模型分别模拟了1911-2010年间全球草地生态系统及净初级生产力(NPP)的时空动态,并通过相关性分析揭示草地 NPP 对不同气候因子的响应。结果表明,在过去的百年间,全球草地面积从1920s 的5175.73万 km2下降到1990s 的5102.16万 km2,其中冻原与高山草地类组的面积下降最多,为192.35万 km2,荒漠草地类组、典型草地类组和温带湿润草地类组的面积分别下降了14.31、34.15和70.81万 km2,而热带萨王纳类组的面积增加了238.06万 km2。在气候变化的影响下,大多数草地类组的重心均向北方移动,在北半球尤为明显。全球草地 NPP 从1920s 的25.93 Pg DW/年增加到1990s 的26.67 Pg DW/年。就各草地类组而言,冻原与高山草地类组、荒漠草地类组、典型草地类组、温带湿润草地类组的 NPP 均呈现下降趋势,分别下降了709.57、24.98、115.74和291.56 Tg DW/年,而热带萨王纳类组的NPP 则增加了1887.37 Tg DW/年。从全球尺度来看,降水是影响草地 NPP 的主要气候因子。总的来说,近百年气候变化对全球草地生态系统产生了深刻的影响,尽管草地 NPP 呈现增加的趋势,但暖湿化的气候变化对草地生态系统的结构和空间分布产生了不利的影响。%Climate change has a significant effect on the spatial distribution,structure and function of ecosys-tems.To understand the effects and feedback mechanisms of climate change on a large spatial and temporal scale,the distribution,shift ranges and net primary production (NPP)of grassland ecosystems across the globe from 1911 to 2010 have been simulated using the Comprehensive Sequential

  15. Investigation of radionuclides and anthropic tracer migration in groundwater at the Chernobyl site

    Science.gov (United States)

    Le Gal La Salle, Corinnne; Simonucci, Caroline; Roux, Céline; Bugai, Dmitry; Aquilina, Luc; Fourré, Elise; Jean-Baptiste, Philippe; Labasque, Thierry; Michelot, Jean-Luc; Fifield, Keith; Team Aster Team; Van Meir, Nathalie; Kashparov, Valeriy; Diez, Olivier; Bassot, Sylvain; Lancelot, Joel

    2013-04-01

    Following the reactor 4 explosion of the Chernobyl Nuclear Power Plant (ChNPP), at least 1019 Bq of radionuclides (RN) were released in the environment. In order to protect workers and prevent further atmospheric RN dispersion in the area adjacent to the ChNPP, contaminated wastes including fuel particles, topsoil layer and forest remains were buried in approximately 800 shallow trenches in the sand formation in the Red Forest waste dump site [1]. No containment measures were taken, and since then RN have leaked to the unsaturated zone and to the groundwater. Since 1999, migration of RN in the vicinity of the trench 22 at Red Forest site has been investigated within the frame of the EPIC program carried out by IRSN in collaboration with UIAR and IGS [2, 3]. A plume of 90Sr was shown downgradient from the trench 22 with activites reaching 3750 Bq/L [2]. In 2008, further studies were initiated through the TRASSE research group, based on a collaboration between IRSN and CNRS. These programs aim at combining groundwater dating with RN migration monitoring studies in order to constrain RN transport models [3]. Groundwater residence time was investigated based on 3H/He and CFC. Both tracers led to ages ranging from modern (1-3 y) at 2 m depth below the groundwater table to significantly higher apparent ages of 50-60 y at 27 m below the groundwater table [3]. 36Cl/Cl ratios 2 to 4 orders of magnitude higher than the theoretical natural ratio are measured in groundwater. Similarly, SF6 shows concentrations as high as 1200 pptv while natural concentrations are in the order of 6-7 pptv. Based on apparent groundwater ages, both contaminations are linked to the Chernobyl explosion. Hence those tracers show excellent potential to constrain conservative and reactive transport, respectively. In contrast, 238U/235U ratio down gradient from trench 22 remains similar to the natural ratio. This suggests that either most of the U contained in the trench is in a non soluble form

  16. The probabilistic safety analysis of Jose Cabrera NPP in the Context of the Periodic safety review; El analisis probabilista de seguridad de C. N. Jose Cabrera en el contexto de la revision periodica de seguridad

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, A. [Empresario Agrupados, A. I. E. Madrid (Spain); Lupianez, J. M.; Ortega, P.; Gallo, J.; Saiz, J.; Gomez, C. [Union Fenosa. Madrid (Spain)

    2000-07-01

    In July 1989, the Spanish Nuclear Safety Council (CSN) called on Jose Cabrera NPP (JCNPP) to perform a probabilistic safety analysis (PSA). Edition 1 of this PSA was presented in July 1993. Edition 2 was delivered to the CSN, along with the database of items pending from the evaluation of Edition 1, December 1997. In October 1998, the CSN and JCNPP agreed on the appropriateness of having a PSA approved for use in the evaluation of the Periodic Safety Review (PSR) and in the renewal process of the Provisional Operating Permit (October 1999). This involved a great effort on the part of both parties, who established a joint calendar of actions to be taken, setting strict deadlines. The deadline for delivering Edition 3 (models, data and quantification programmes) was set for 15 june 1999. This was complemented by the preparation of applications on licensing-related issues, and a document reflecting the resolution of pending items. Subsequently, In April, JCNPP was required to prepare additional applications. (Author)

  17. RADIOECOLOGICAL INVESTIGATIONS IN THE SEA OF JAPAN AND THE NORTH-WEST PART OF THE PACIFIC OCEAN AFTER THE ACCIDENT AT THE NPP “FUKUSHIMA-1” IN JAPAN: PRELIMINARY RESULTS

    Directory of Open Access Journals (Sweden)

    A. I. Nikitin

    2011-01-01

    Full Text Available In the period from April 22 until May 20, 2011, an expedition aboard the research vessel “Pavel Gordienko” (Russian Federation was carried out to the Sea of Japan and the Kuril-Kamchatka region of the Pacific Ocean. The main aim of the expedition was to study radioactive contamination of the atmospheric air and sea water after the accident at the NPP “Fukushima-1” in Japan. This paper provides preliminary results on the activity concentration of 137Cs and 134Cs in twenty four samples of sea water. The activity concentrations of 131I, 137Cs, 134Cs, and 7Be for twenty nine samples of atmospheric aerosols, which were sampled during the expedition, are also given. Despite the preliminary character of the results of this study, a generic conclusion on a negligible radiological impact of the anthropogenic gamma-ray-emitting radionuclides for the Far-Eastern sea areas of Russia can be reached. The investigations have been supported by a grant from the Russian Geographical Society.

  18. Experiences in the implementation of the Coaching project in the nuclear power plant of Laguna Verde (NPP-L V); Experiencias en la implementacion del proyecto Coaching en la Central Nucleoelectrica Laguna Verde (CNLV)

    Energy Technology Data Exchange (ETDEWEB)

    Mendez M, H. I., E-mail: hugo.mendez01@cfe.gob.mx [Comision Federal de Electricidad, Central Nucleoelectrica Laguna Verde, Departamento del Centro de Entrenamiento, Carretera Cardel-Nautla Km 42.5, Alto Lucero, Veracruz (Mexico)

    2012-10-15

    This document has the purpose of to share acquired experiences during the implementation of the Coaching project focused the training of supervisors and directive personnel of the nuclear power plant of Laguna Verde (NPP-L V). Derived of the improvement areas identified by the supervisor organization of the nuclear power stations WANO (World Association Nuclear of Operators) and of the auto-evaluations realized by the expert personnel of the same power station that based on external experiences carried out through the Benchmarking (comparison with other power stations) they have reflected the necessity to activate a training process in Coaching with a practical focus toward the directive and supervisor personnel in the power station. By means of the observation of the personnel's acting so much in the control rooms like in different areas, three focus areas have been identified for the training in Coaching, these are the personnel's motivation, the organizational communication so much in vertical form as horizontal and the perception of confidence lack among directive, supervisors, operators and technicians. The plan focused in the abilities training of Coaching with practical sense was development, supported with an evaluation of 360 grades as tool of competitions development through a computer application e-Coaching. The use of application and Coaching following techniques facilitated the conformation of the practical focus, same that are of continuous use starting from the training of the supervisor and directive personnel. (Author)

  19. Criticality and shielding study for reracking of the spent fuel storage of NPP Jaragua; Estudio de la criticalidad y el blindaje del almacen de combustible irradiado de la Central Electronuclear de Juragua para redes compactas

    Energy Technology Data Exchange (ETDEWEB)

    Guerra Valdes, Ramiro; Lopez Aldama, Daniel; Rodriguez Gual, Maritza; Garcia Yip, Fernando; Alvarez Cardona, Caridad [Centro de Tecnologia Nuclear, La Habana (Cuba)

    1996-07-01

    Annually one third of the fuel assemblies are discharged from VVER-440 reactor core. After 2 years of decay in the refueling pool, these assemblies are transferred to the spent fuel storage pool. With two units in operation, it would exhaust its storage capability in about 10 years. According to the trend of extending the interim storage period, the reracking of the spent fuel storage pool has become a viable option to enlarge storage capability at the nuclear power plant. The present paper deals with the criticality and shielding analysis for reracking of the spent fuel storage pool of NPP Juragua. The WIMS/D4 lattice code is used for the criticality study. For doses calculations, the source strength is estimated with ORIGEN 2 and the shielding problem is solved with the combination of the code ANISN and the multigroup library CASK. It is shown that it is possible to compact the storage rack in a factor of 1.98 using 3 mm thick boron steel clads. While the source is nearly doubled in the pool, the doses in its boundaries are increased approximately in only 1.24 times. (author)

  20. Estimating Absolute Site Effects

    Energy Technology Data Exchange (ETDEWEB)

    Malagnini, L; Mayeda, K M; Akinci, A; Bragato, P L

    2004-07-15

    The authors use previously determined direct-wave attenuation functions as well as stable, coda-derived source excitation spectra to isolate the absolute S-wave site effect for the horizontal and vertical components of weak ground motion. They used selected stations in the seismic network of the eastern Alps, and find the following: (1) all ''hard rock'' sites exhibited deamplification phenomena due to absorption at frequencies ranging between 0.5 and 12 Hz (the available bandwidth), on both the horizontal and vertical components; (2) ''hard rock'' site transfer functions showed large variability at high-frequency; (3) vertical-motion site transfer functions show strong frequency-dependence, and (4) H/V spectral ratios do not reproduce the characteristics of the true horizontal site transfer functions; (5) traditional, relative site terms obtained by using reference ''rock sites'' can be misleading in inferring the behaviors of true site transfer functions, since most rock sites have non-flat responses due to shallow heterogeneities resulting from varying degrees of weathering. They also use their stable source spectra to estimate total radiated seismic energy and compare against previous results. they find that the earthquakes in this region exhibit non-constant dynamic stress drop scaling which gives further support for a fundamental difference in rupture dynamics between small and large earthquakes. To correct the vertical and horizontal S-wave spectra for attenuation, they used detailed regional attenuation functions derived by Malagnini et al. (2002) who determined frequency-dependent geometrical spreading and Q for the region. These corrections account for the gross path effects (i.e., all distance-dependent effects), although the source and site effects are still present in the distance-corrected spectra. The main goal of this study is to isolate the absolute site effect (as a function of frequency

  1. Modelling of radionuclides dispersion in coastal waters. A study case on the dispersion of radionuclides released with the liquid effluents of Angra dos Reis NPP - Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, H.M.; Veiga, L.; Rochedo, E.; Vetere, M.I. [Instituto de Radioprotecao e Dosimetria (IRD), Rio de Janeiro, RJ (Brazil); Osvath, I. [International Atomic Energy Agency, Monaco (Monaco). Marine Environment Lab

    1997-12-31

    The problem of the dispersion of radionuclides at coastal areas is discussed. The study focused on the dispersion of {sup 3}H and {sup 137}Cs released at Ribeira Bay, Rio de Janeiro, Brazil, with the liquid effluents of the Angra dos Reis nuclear power plant. It has been demonstrated that due to the site specific hydrodynamics the exportation of radionuclides to the open ocean would be a rather fast process. The study also examined the best strategy for accidental releases. It could be evaluated that in terms of the radionuclide inventory in the boxes the release at Itaorna Inlet would be a better option than the release at Piraquara de Fora Inlet. However, this option should be examined after a detailed dose assessment study. (author) 6 refs.

  2. Site clearance working group

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The Gulf of Mexico and Louisiana continue to be areas with a high level of facility removal, and the pace of removal is projected to increase. Regulations were promulgated for the Gulf of Mexico and Louisiana requiring that abandoned sites be cleared of debris that could interfere with fishing and shrimping activities. The site clearance regulations also required verification that the sites were clear. Additionally, government programs were established to compensate fishermen for losses associated with snagging their equipment on oil and gas related objects that remained on the water bottoms in areas other than active producing sites and sites that had been verified as clear of obstructions and snags. The oil and gas industry funds the compensation programs. This paper reviews the regulations and evolving operating practices in the Gulf of Mexico and Louisiana where site clearance and fisherman`s gear compensation regulations have been in place for a number of years. Although regulations and guidelines may be in place elsewhere in the world, this paper focuses on the Gulf of Mexico and Louisiana. Workshop participants are encouraged to bring up international issues during the course of the workshop. Additionally, this paper raises questions and focuses on issues that are of concern to the various Gulf of Mexico and Louisiana water surface and water bottom stakeholders. This paper does not have answers to the questions or issues. During the workshop participants will debate the questions and issues in an attempt to develop consensus opinions and/or make suggestions that can be provided to the appropriate organizations, both private and government, for possible future research or policy adjustments. Site clearance and facility removal are different activities. Facility removal deals with removal of the structures used to produce oil and gas including platforms, wells, casing, piles, pipelines, well protection structures, etc.

  3. SiteGuide: A tool for web site authoring support

    NARCIS (Netherlands)

    Hollink, V.; de Boer, V.; van Someren, M.; Cordeiro, J.; Filipe, J.

    2010-01-01

    We present ‘SiteGuide’, a tool that helps web designers to decide which information will be included in a new web site and how the information will be organized. SiteGuide takes as input URLs of web sites from the same domain as the site the user wants to create. It automatically searches the pages

  4. Tritium level along Romanian Black Sea Coast

    Energy Technology Data Exchange (ETDEWEB)

    Varlam, C.; Stefanescu, I.; Popescu, I.; Faurescu, I. [National Inst. for Cryogenic and Isotopic Technologies, PO Box 10, Rm. Valcea, 24050 (Romania)

    2008-07-15

    Establishing the tritium level along the Romanian Black Sea Coast, after 10 years of exploitation of the nuclear power plant from Cernavoda, is a first step in evaluating its impact on the Black Sea ecosystem. The monitoring program consists of tritium activity concentration measurement in sea water and precipitation from Black Sea Coast between April 2005 and April 2006. The sampling points were spread over the Danube-Black Sea Canal - before the locks Agigea and Navodari, and Black Sea along the coast to the Bulgarian border. The average tritium concentration in sea water collected from the sampling locations had the value of 11.1 {+-} 2.1 TU, close to tritium concentration in precipitation. Although an operating nuclear power plant exists in the monitored area, the values of tritium concentration in two locations are slightly higher than those recorded elsewhere. To conclude, it could be emphasized that until now, Cernavoda NPP did not had any influence on the tritium concentration of the Black Sea Shore. (authors)

  5. Superfund and Toxic Release Inventory Sites - MDC_ContaminatedSite

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — A point feature class of open DERM Contaminated sites - see phase code for status of site. Contaminated sites identifies properties where environmental contamination...

  6. Region 9 NPL Sites (Superfund Sites 2013) Polygons

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site POLYGON locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  7. Superfund and Toxic Release Inventory Sites - MDC_ContaminatedSite

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — A point feature class of open DERM Contaminated sites - see phase code for status of site. Contaminated sites identifies properties where environmental contamination...

  8. YUCCA MOUNTAIN SITE DESCRIPTION

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Simmons

    2004-04-16

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

  9. Hydroelectric generating site signage

    Energy Technology Data Exchange (ETDEWEB)

    Bentley, K. [British Columbia Hydro, Vancouver, BC (Canada)

    1997-04-01

    Recreational sites have been developed at several BC Hydro reservoirs. These sites are visited by approximately 800,000 people annually and therefore, require consistent control measures to ensure public safety and to restrict public access to hazardous areas. BC Hydro is in the process of establishing a province-wide standard in which layout, colour, description of hazards, BC Hydro identity and sign placement would follow an established set of criteria. Proposed signs would consist of a pictograph and a printed warning below. Preliminary designs for 16 of the signs were presented. 16 figs.

  10. Region 9 NPL Sites - 2014

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site point locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  11. Site-Specific Innovation

    DEFF Research Database (Denmark)

    Reeh, Henrik; Hemmersam, Peter

    2015-01-01

    , but also places for emerging lifestyles and cultural processes. In this transformation process, harbours provide arenas for a new urban dynamics, involving multiple sectors and functions in society, as opposed to the monoculturalism prevailing in the ages of the industrial city. To us, the critical...... question is how innovation may contribute to urban life and site-specific qualities....

  12. Sites and Enactments

    DEFF Research Database (Denmark)

    Korsgaard, Steffen; Neergaard, Helle

    2010-01-01

    This paper develops a framework for researching entrepreneurial opportunities. We argue that these can best be understood as dynamic and fluid effects of entrepreneurial processes that are enacted differently across different sites. On this basis we develop a framework for studying entrepreneuria...

  13. 2014 Site Environmental Report

    Energy Technology Data Exchange (ETDEWEB)

    Paquette, Douglas [Brookhaven National Lab. (BNL), Upton, NY (United States); Remien, Jason [Brookhaven National Lab. (BNL), Upton, NY (United States); Foley, Brian [Brookhaven National Lab. (BNL), Upton, NY (United States); Burke, John [Brookhaven National Lab. (BNL), Upton, NY (United States); Dorsch, William [Brookhaven National Lab. (BNL), Upton, NY (United States); Ratel, Karen [Brookhaven National Lab. (BNL), Upton, NY (United States); Howe, Robert [Brookhaven National Lab. (BNL), Upton, NY (United States); Welty, Tim [Brookhaven National Lab. (BNL), Upton, NY (United States); Williams, Jeffrey [Brookhaven National Lab. (BNL), Upton, NY (United States); Pohlpt, Peter [Brookhaven National Lab. (BNL), Upton, NY (United States); Lagattolla, Richard [Brookhaven National Lab. (BNL), Upton, NY (United States); Metz, Robert [Brookhaven National Lab. (BNL), Upton, NY (United States); Milligan, James [Brookhaven National Lab. (BNL), Upton, NY (United States); Lettieri, Lawrence [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2015-10-01

    BNL prepares an annual Site Environmental Report (SER) in accordance with DOE Order 231.1B, Environment, Safety and Health Reporting. The report is written to inform the public, regulators, employees, and other stakeholders of the Laboratory’s environmental performance during the calendar year in review.

  14. Sites and Enactments

    DEFF Research Database (Denmark)

    Korsgaard, Steffen T.; Neergaard, Helle

    2008-01-01

    is formulated where opportunities are seen as dynamic in the sense that they are enacted in different social practices at different sites. The method is illustrated through an analysis of the birth of The Republic of Tea, a very successful tea company, as presented in the book "The Republic of Tea"....

  15. Visit our Site

    NARCIS (Netherlands)

    Jos de Haan; Renée Mast; Marleen Varekamp; Susanne Janssen

    2006-01-01

    Original title: Bezoek onze site. More and more cultural organisations are digitising content and making this cultural treasure chest available to a wider public via the Internet. International comparison shows that the Netherlands is one of the leaders in this regard. This report summarises the ma

  16. Power plant siting

    Energy Technology Data Exchange (ETDEWEB)

    Winter, J.V.; Conner, D.A.

    1978-01-01

    Just to keep up with expected demand, the US will need over 500 new power generation units by 1985. Where these power plants will be located is the subject of heated debate among utility officials, government leaders, conservationists, concerned citizens and a multitude of special interest groups. This book offers a balanced review of all of the salient factors that must be taken into consideration in selecting power plant locations. To deal with this enormously complex subject, the authors (1) offer a general overview of the history and reasoning behind present legislation on the state and national levels; (2) describe the many different agencies that have jurisdiction in power plant location, from local water authorities and city councils to state conservation boards and the Nuclear Regulatory Commission; and (3) include a state-by-state breakdown of siting laws, regulations and present licensing procedures. Architects, engineers, contractors, and others involved in plant construction and site evaluation will learn of the trade-offs that must be made in balancing the engineering, economic, and environmental impacts of plant location. The book covers such areas as availability of water supplies for generation or cooling; geology, typography, and demography of the proposed site; and even the selection of the fuel best suited for the area. Finally, the authors examine the numerous environmental aspects of power plant siting.

  17. School-Site Management.

    Science.gov (United States)

    English, Fenwick W.

    1989-01-01

    School-site management embodies the concept that decisions should be made at the lowest possible level in organizations and intends that no decision be made without the input of those affected by them. The concept also suggests the empowerment of individual units of the system, particularly, the teachers. Centralization versus decentralization is…

  18. Small Wind Site Assessment Guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Olsen, Tim [Advanced Energy Systems LLC, Eugene, OR (United States); Preus, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-09-01

    Site assessment for small wind energy systems is one of the key factors in the successful installation, operation, and performance of a small wind turbine. A proper site assessment is a difficult process that includes wind resource assessment and the evaluation of site characteristics. These guidelines address many of the relevant parts of a site assessment with an emphasis on wind resource assessment, using methods other than on-site data collection and creating a small wind site assessment report.

  19. Multi-site assimilation of a terrestrial biosphere model (BETHY) using satellite derived soil moisture data

    Science.gov (United States)

    Wu, Mousong; Sholze, Marko

    2017-04-01

    We investigated the importance of soil moisture data on assimilation of a terrestrial biosphere model (BETHY) for a long time period from 2010 to 2015. Totally, 101 parameters related to carbon turnover, soil respiration, as well as soil texture were selected for optimization within a carbon cycle data assimilation system (CCDAS). Soil moisture data from Soil Moisture and Ocean Salinity (SMOS) product was derived for 10 sites representing different plant function types (PFTs) as well as different climate zones. Uncertainty of SMOS soil moisture data was also estimated using triple collocation analysis (TCA) method by comparing with ASCAT dataset and BETHY forward simulation results. Assimilation of soil moisture to the system improved soil moisture as well as net primary productivity(NPP) and net ecosystem productivity (NEP) when compared with soil moisture derived from in-situ measurements and fluxnet datasets. Parameter uncertainties were largely reduced relatively to prior values. Using SMOS soil moisture data for assimilation of a terrestrial biosphere model proved to be an efficient approach in reducing uncertainty in ecosystem fluxes simulation. It could be further used in regional an global assimilation work to constrain carbon dioxide concentration simulation by combining with other sources of measurements.

  20. Trends of grassland NPP and its response to human activity in Northern Tibet%藏北高寒草地NPP变化趋势及其对人类活动的响应

    Institute of Scientific and Technical Information of China (English)

    高清竹; 万运帆; 李玉娥; 盛文萍; 江村旺扎; 王宝山; 李文福

    2007-01-01

    基于1981~2004年多年遥感监测数据和气象数据以及其它相关数据,采用CASA(Carnegie-Ames-Stanford Approach)模型估算藏北地区草地植被净第一性生产力(NPP),分析草地植被NPP变化趋势的空间格局及其对人类活动强度的响应.结果表明:近24a以来,藏北绝大部分区域(约占草地总面积的88.61%)草地植被NPP变化趋势不明显;而草地植被NPP变化趋势显著的区域仅占草地总面积的11.39%,其中显著降低约占11.30%,显著增高仅占0.09%.在藏北地区,高海拔区域有较大比例(大于26%)的草地NPP显著降低;坡度在15~30°之间区域的草地NPP变化幅度较大;而坡向对草地NPP变化趋势的影响不大.藏北地区居民点对草地NPP变化趋势的负面影响小于道路影响;从综合影响来看,离道路和居民点越近、人类活动强度及其对草地NPP变化趋势的影响越大,尤其是草地NPP显著增高区域只分布在人类活动强度最大的第一个缓冲区内.

  1. Calculation and analysis of hydrogen volume concentrations in the vent pipe rigid proposed for NPP-L V; Calculo y analisis de concentraciones volumetricas de hidrogeno en el tubo de venteo rigido propuesto para la CNLV

    Energy Technology Data Exchange (ETDEWEB)

    Gomez T, A. M.; Xolocostli M, V. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Lopez M, R.; Filio L, C. [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Jose Ma. Barragan No. 779, Col. Narvarte, 03020 Mexico D. F. (Mexico); Royl, P., E-mail: armando.gomez@inin.gob.mx [Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz I, D-76344 Eggenstein-Leopoldshafen (Germany)

    2014-10-15

    In 2012 was modeled of primary and secondary container of the nuclear power plant of Laguna Verde (NPP-L V) for the CFD Gas-Flow code. These models were used to calculate hydrogen volume concentrations run release the reactor building in case of a severe accident. The results showed that the venting would produce detonation conditions in the venting level (level 33) and flammability at ground level of reload. One of the solutions to avoid reaching critical concentrations (flammable or detonable) inside the reactor building and thus safeguard the contentions is to make a rigid venting. The rigid vent is a pipe connected to the primary container could go to the level 33 of the secondary container and style fireplace climb to the top of the reactor building. The analysis of hydrogen transport inside the vent pipe can be influenced by various environmental criteria and factors vent, so a logical consequence of the 2012 analysis is the analysis of the gases transport within said pipe to define vent ideal conditions. For these evaluations the vent pipe was modeled with a fine mesh of 32 radial interior nodes and a coarse mesh of 4 radial interior nodes. With three-dimensional models were realized calculations that allow observing the influence of heat transfer in the long term, i.e. a complete analysis of exhaust (approx. 700 seconds). However, the most interesting results focus on the first milliseconds, when the H{sub 2} coming from the atmosphere of the primary container faces the air in the vent pipe. These first milliseconds besides allowing evaluating the detonation criteria in great detail in the different tubular sections similarly allow evaluating the pressure wave that occurs in the pipe and that at some point slows to the fluid on the last tubular section and could produce a detonation inside the pipe. Results are presented for venting fixed conditions, showing possible detonations into the pipe. (Author)

  2. Hydrogen Concentration Distribution Simulation During Severe Accidents in Pressurizer Relief Tank Compartment of NPP Containment%严重事故下安全壳卸压箱隔间氢气浓度场模拟

    Institute of Scientific and Technical Information of China (English)

    郭强; 陈耀东

    2012-01-01

    根据MELCOR程序对全厂断电诱发的严重事故下安全壳内各隔间的氢气浓度分布的计算结果,参考美国联邦法规关于氢气控制和风险分析的标准,分析安全壳内氢气的燃烧风险.结果表明:安全壳内平均氢气浓度不会导致整体性氢气燃烧,但存在局部燃烧的风险.通过CFD程序对氢气浓度较高的卸压箱隔间进行氢气释放和空间气体流动过程的模拟,得到更细致的卸压箱隔间内氢气浓度场分布,给出氢气聚集区域的准确位置,为采取严重事故缓解措施,设计氢复合器布置方案提供了参考依据.%Based on the analysis by MELCOR for hydrogen concentration distributions in compartments of NPP containment during severe accidents which is induced by station blackout, the hydrogen combustion risk was investigated. According to the hydrogen control and risk analysis standard of US, the results show that the average hydrogen concentration will not bring on global deflagration, but local deflagration may occur. By application of CFD code, further simulation of hydrogen release and flow process in pressurizer relief tank compartment was performed. More details of hydrogen distribution and hydrogen accumulation zone were showed. Through the results, some insights were given as references for severe accident mitigation measures and hydrogen recombines arrangement design.

  3. PhosphoSiteAnalyzer

    DEFF Research Database (Denmark)

    Bennetzen, Martin V; Cox, Jürgen; Mann, Matthias

    2012-01-01

    an algorithm to retrieve kinase predictions from the public NetworKIN webpage in a semiautomated way and applies hereafter advanced statistics to facilitate a user-tailored in-depth analysis of the phosphoproteomic data sets. The interface of the software provides a high degree of analytical flexibility...... and is designed to be intuitive for most users. PhosphoSiteAnalyzer is a freeware program available at http://phosphosite.sourceforge.net ....

  4. Site-directed mutagenesis.

    Science.gov (United States)

    Bachman, Julia

    2013-01-01

    Site-directed mutagenesis is a PCR-based method to mutate specified nucleotides of a sequence within a plasmid vector. This technique allows one to study the relative importance of a particular amino acid for protein structure and function. Typical mutations are designed to disrupt or map protein-protein interactions, mimic or block posttranslational modifications, or to silence enzymatic activity. Alternatively, noncoding changes are often used to generate rescue constructs that are resistant to knockdown via RNAi.

  5. 1999 SITE ENVIRONMENTAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    ENGEL-COX,J.; ZIMMERMAN,E.; LEE,R.; WILLIAMS,J.; GREEN,T.; PAQUETTE,D.; HOODA,B.; SCARPITTA,S.; GENZER,P.; ET AL

    2000-09-01

    Throughout the scientific community, Brookhaven National Laboratory (BNL) is renowned for its leading-edge research in physics, medicine, chemistry, biology, materials, and the environment. BNL is committed to supporting its world-class scientific research with an internationally recognized environmental protection program. The 1999 Site Environmental Report (SER) summarizes the status of the Laboratory's environmental programs and performance, including the steady progress towards cleaning up the site and fully integrating environmental stewardship into all facets of the Laboratory's mission. BNL is located on 5,265 acres of pine barrens in Suffolk County in the center of Long Island, New York. The Laboratory is situated above a sole source aquifer at the headwaters of the Peconic River; therefore, protecting ground and surface water quality is a special concern. Approximately 3,600 acres of the site are undeveloped and serve as habitat for a wide variety of animals and plants, including one New York State endangered species, the tiger salamander, and two New York State threatened species, the banded sunfish and the stiff goldenrod. Monitoring, preserving, and restoring these ecological resources is a high priority for the Laboratory.

  6. Assessment on regulatory framework for safety of radioactive waste management as preparation for future NPP in Indonesia; a comparison study with South Korea

    Energy Technology Data Exchange (ETDEWEB)

    Setianingsih, Lilis Susanti [KAIST, Daejeon (Korea, Republic of); Jeong, Seung Young [KINS, Daejeon (Korea, Republic of)

    2012-10-15

    Indonesia is an archipelago country consisting of more than 18,000 islands with five main big islands; Java; the smallest among the five, with the most population which is more than 58% of the total 237 million people as national population living in it; Sumatera, Borneo/Kalimantan, Sulawesi and Irian which share half of its island to Papua New Guinea. Challenges in monitoring and controlling nuclear related facilities in such widely spread geographical location is definitely high. Requirements of strong regulation and consistent law enforcement along with qualified human resources to perform their duties need to be satisfied in order to be able to cover the whole region with excellent strategic planning of actions. Apart from the three research reactors, radioactive and/or nuclear facilities exist in industrial sites in Indonesia for various purposes. There are several types of nuclear energy utilization for industrial purposes. Irradiator is one type utilizing ionizing radiation generation or sealed encapsulated radioactive source commonly used for enhancing rubber flexibility without decreasing its quality level. Other application of nuclear energy utilization in industry is gauging implemented in beverage and cigarettes industries for measurement process by using radioactive source like Cs 137, Co 60 and Am 241Be to control maximum level of liquid in glass bottles and to check even distribution of tobacco in cigarettes. Nuclear energy utilization in Non Destructive Testing (NDT) application can be found in facilities like radiography for open facilities (usually for remote location with mobile equipment of NDT) and for closed facilities usually performed for piping inspection particularly in piping connection for structure and material inspection. In oil field service industry, we have oil well logging utilizing nuclear energy for formation evaluation process by having porosity and density measurements. Nuclear well logging is intended to get well bore

  7. ZFN-Site searches genomes for zinc finger nuclease target sites and off-target sites

    Directory of Open Access Journals (Sweden)

    Iseli Christian

    2011-05-01

    Full Text Available Abstract Background Zinc Finger Nucleases (ZFNs are man-made restriction enzymes useful for manipulating genomes by cleaving target DNA sequences. ZFNs allow therapeutic gene correction or creation of genetically modified model organisms. ZFN specificity is not absolute; therefore, it is essential to select ZFN target sites without similar genomic off-target sites. It is important to assay for off-target cleavage events at sites similar to the target sequence. Results ZFN-Site is a web interface that searches multiple genomes for ZFN off-target sites. Queries can be based on the target sequence or can be expanded using degenerate specificity to account for known ZFN binding preferences. ZFN off-target sites are outputted with links to genome browsers, facilitating off-target cleavage site screening. We verified ZFN-Site using previously published ZFN half-sites and located their target sites and their previously described off-target sites. While we have tailored this tool to ZFNs, ZFN-Site can also be used to find potential off-target sites for other nucleases, such as TALE nucleases. Conclusions ZFN-Site facilitates genome searches for possible ZFN cleavage sites based on user-defined stringency limits. ZFN-Site is an improvement over other methods because the FetchGWI search engine uses an indexed search of genome sequences for all ZFN target sites and possible off-target sites matching the half-sites and stringency limits. Therefore, ZFN-Site does not miss potential off-target sites.

  8. Windows Azure web sites

    CERN Document Server

    Chambers, James

    2013-01-01

    A no-nonsense guide to maintaining websites in Windows Azure If you're looking for a straightforward, practical guide to get Azure websites up and running, then this is the book for you. This to-the-point guide provides you with the tools you need to move and maintain a website in the cloud. You'll discover the features that most affect developers and learn how they can be leveraged to work to your advantage. Accompanying projects enhance your learning experience and help you to walk away with a thorough understanding of Azure's supported technologies, site deployment, and manageme

  9. 1994 Site Environmental Report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    The 1994 Site Environmental Report summarizes environmental activities at Lawrence Berkeley Laboratory (LBL) for the calendar year (CY) 1994. The report strives to present environmental data in a manner that characterizes the performance and compliance status of the Laboratory`s environmental management programs when measured against regulatory standards and DOE requirements. The report also discusses significant highlight and planning efforts of these programs. The format and content of the report are consistent with the requirements of the US Department of Energy (DOE) Order 5400.1, General Environmental Protection Program.

  10. A Parametric Study of the Impact of the Cooling Water Site Specific Conditions on the Efficiency of a Pressurized Water Reactor Nuclear Power Plant

    Directory of Open Access Journals (Sweden)

    Mohamed M. A. Ibrahim

    2014-01-01

    Full Text Available In this study, the thermal analysis for the impact of the cooling seawater site specific conditions on the thermal efficiency of a conceptual pressurized water reactor nuclear power plant (PWR NPP is presented. The PWR NPP thermal performance depends upon the heat transfer analysis of steam surface condenser accounting for the key parameters such as the cooling seawater salinity and temperature that affect the condenser overall heat transfer coefficient and fouling factor. The study has two aspects: the first one is the impact of the temperature and salinity within a range of (290 K–310 K and 0.00–60000 ppm on the seawater thermophysical properties such as density, specific heat, viscosity, and thermal conductivity that reflect a reduction in the condenser overall heat transfer coefficient from 2.25 kW/m2 K to 1.265 kW/m2 K at temperature and salinity of 290 K and 0.00 ppm and also from 2.35 kW/m2 K to 1.365 kW/m2 K at temperature and salinity of 310 K and 60000 ppm, whereas the second aspect is the fouling factor variations due to the seawater salinity. The analysis showed that the two aspects have a significant impact on the computation of the condenser overall heat transfer coefficient, whereas the increase of seawater salinity leads to a reduction in the condenser overall heat transfer coefficient.

  11. AMF 1 Site Science

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Mark Alan [Rutgers Univ., New Brunswick, NJ (United States)

    2016-08-18

    This report documents progress on DOE Grant# DE-FG02-08ER64531 funded by the Department of Energy’s Atmospheric Systems Research (ASR) program covering the period between its inception in 2008 and its conclusion in 2014. The Atmospheric Radiation Measurement (ARM) Program’s Mobile Facility #1 (AMF#1) is a collection of state-of-the art atmospheric sensing systems including remote and in situ instrumentation designed to characterize the atmospheric column above and in the immediate vicinity of the deployment location. The grant discussed in this report funded the activities of the AMF#1 Site Scientist Team. Broad responsibilities of this team included examining new deployment sites and recommending instrument deployment configurations; data quality control during the early stages of deployments and for certain instruments through the course of the deployment; scientific outreach in the host country or location (particularly international deployments); scientific research oriented toward basic questions about cloud physics and radiation transfer in the deployment region; and training of Ph.D. students to conduct future research relevant to the Atmospheric Systems Research (ASR) program.

  12. Site-specific

    Directory of Open Access Journals (Sweden)

    Adel M.E. Mohamed

    2013-06-01

    Full Text Available In order to quantify the near-surface seismic properties (P- and S-wave velocities, and the dynamic elastic properties with respect to the depth at a specific area (6th of October club, we conducted a non-invasive and low cost active seismic survey. The primary wave velocity is determined by conducting a P-wave shallow seismic refraction survey. The dispersive characteristics of Rayleigh type surface waves were utilized for imaging the shallow subsurface layers by estimating the 1D (depth and 2D (depth and surface location shear wave velocities. The reliability of the Multi-channel Analysis of Surface Waves (MASW depends on the accurate determination of phase velocities for horizontally traveling fundamental mode Rayleigh waves. Consequently, the elastic properties are evaluated empirically. The Vs30 (average shear wave velocity down to 30 m depth, which is obtained from the MASW technique, plays a critical role in evaluating the site response of the upper 30 m depth. The distribution of the obtained values of Vs30 through the studied area demonstrates site classes of C and D, according to the NEHRP (National Earthquake Hazard Reduction Program and IBC (International Building Code standards.

  13. Multi-Sited Resilience

    DEFF Research Database (Denmark)

    Olwig, Mette Fog

    2012-01-01

    Participatory methods to build local resilience often involve the organization of local community groups. When global organizations use such methods, it reflects a desire to incorporate local agency. They thereby acknowledge the ability of a society to be innovative and adapt when faced with natu......Participatory methods to build local resilience often involve the organization of local community groups. When global organizations use such methods, it reflects a desire to incorporate local agency. They thereby acknowledge the ability of a society to be innovative and adapt when faced...... with natural disasters and climate change. In a globalized world, however, it is hard to discern what is “local” as global organizations play an increasingly visible and powerful role. This paper will argue that local understandings and practices of resilience cannot be disentangled from global understandings...... flooding in northern Ghana, this paper examines the mutual construction of “local” and “global” notions and practices of resilience through multi-sited processes. It is based on interviews and participant observation in multiple sites at the “local,” “regional” and “global” levels....

  14. Multi-Sited Resilience

    DEFF Research Database (Denmark)

    Olwig, Mette Fog

    2012-01-01

    Participatory methods to build local resilience often involve the organization of local community groups. When global organizations use such methods, it reflects a desire to incorporate local agency. They thereby acknowledge the ability of a society to be innovative and adapt when faced with natu......Participatory methods to build local resilience often involve the organization of local community groups. When global organizations use such methods, it reflects a desire to incorporate local agency. They thereby acknowledge the ability of a society to be innovative and adapt when faced...... with natural disasters and climate change. In a globalized world, however, it is hard to discern what is “local” as global organizations play an increasingly visible and powerful role. This paper will argue that local understandings and practices of resilience cannot be disentangled from global understandings...... flooding in northern Ghana, this paper examines the mutual construction of “local” and “global” notions and practices of resilience through multi-sited processes. It is based on interviews and participant observation in multiple sites at the “local,” “regional” and “global” levels....

  15. 2003 SITE ENVIRONMENTAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    ENVIRONMENT AND WASTE MANAGMENT SERVICES DIVISION; ET AL.

    2004-10-01

    Each year, Brookhaven National Laboratory (BNL), a multi-program national laboratory, prepares an annual Site Environmental Report (SER) in accordance with Order 231.1A, Environment, Safety and Health Reporting, of the U.S. Department of Energy (DOE). The SER is written to inform outside regulators, the public, and Laboratory employees of BNL's environmental performance during the calendar year in review, and to summarize BNL's on-site environmental data; environmental management performance; compliance with applicable DOE, Environmental Protection Agency (EPA), state, and local regulations; and environmental, restoration, and surveillance monitoring programs. BNL has prepared annual SERs since 1971 and has documented nearly all of its environmental history since the Laboratory's inception in 1947. This report is intended to be a technical document. It is available in print and as a downloadable file on the BNL web page at http://www.bnl.ser.htm. A summary of the SER is also prepared each year to provide a general overview, and is distributed with a CD version of the full-length SER. The summary supports BNL's educational and community outreach program.

  16. 1996 Site environmental report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The FEMP is a Department of Energy (DOE)-owned facility that produced high-quality uranium metals for military defense for nearly 40 years. DOE suspended production at the FEMP in 1989 and formally ended production in 1991. Although production activities have ceased, the site continues to examine the air and liquid pathways as possible routes through which pollutants from past operations and current remedial activities may leave the FEMP. The Site Environmental Report (SER) is prepared annually in accordance with DOE Order 5400.1, General Environmental Protection Program. This 1996 SER provides the general public as well as scientists and engineers with the results from the ongoing Environmental Monitoring Program. Also included in this report is information concerning the FEMP progress toward achieving full compliance with requirements set forth by DOE, U.S. Environmental Protection Agency (EPA), and Ohio EPA (OEPA). For some readers, the highlights provided in this Executive Summary may provide sufficient information. Many readers, however, may wish are presented here. All information presented in this summary is discussed more fully in the main body of this report.

  17. RISKAUDIT Report no. 7, Vol. 2: Safety evaluation of VVER 440/213 and VVER 1000/320 reactors in Rovno NPP Units 1, 2 and 3. Final Report by AIB-Vincotte Nuclear, CIEMAT, ANPA, GRS, IPSN, AEA-T

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-07-15

    The Riskaudit 7 report has been made by a group of independent experts from Western European countries representing technical organizations specialized in the support of regulatory bodies of those countries. It represents a preliminary estimation of the Ukrainian WWER B 213 and B 320 reactors, based on the example of Rovno NPP, analysed with a Western practice. The second part of the document covers the following aspects of the report: accident analysis; systems analysis; plant operation; operating experience feedback; radio protection and health; probabilistic safety assessment; summary and future plans.

  18. Parametric study of different perturbations applied to the reactor of the NPP Ringhals-1with the coupled codes RELAP5/PARCSv2.7; Estudio parametrico de diferentes perturbaciones aplicadas al reactor de la Central Nuclear de Ringhals 1 con los codigos acoplados RELAP5/PARCSv2.7

    Energy Technology Data Exchange (ETDEWEB)

    Abarca, A.; Barrachina, T.; Miro, R.; Ginestar, D.; Verdu, G.

    2011-07-01

    It has been implemented in the attached code a new method of inducing instabilities in NPP with BWR reactor, through disturbances in the moderator density based on the shape and amplitude of the power