WorldWideScience

Sample records for cern technical training

  1. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  2. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2009-01-01

    Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual session of this course will take place on 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  3. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced using Windows XP. The next bilingual sessions of this course will take place on December 12, 2008 and January 30, 2009. Register using our catalogue : http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

  4. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  5. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    Are you running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

  6. CERN Technical Training: Signal Processor

    CERN Multimedia

    HR Department

    2009-01-01

    A new training is going to be held at CERN on the ADSP SHARC Family. The "System Development and Programming with the Analog Devices’ SHARC Family" course is a 3.5-day hands-on training on Analog Devices SHARC DSPs, focusing on the latest ‘368/9 and 37x families. General DSP architecture, peripherals available, booting up process and DSP code development will be covered. Hardware tools, debugging and hardware design guidelines will be introduced as well. The course id designed for System Designers needing to make informed decisions on design tradeoffs, Hardware Designers needing to develop external interfaces, and Code Developers needing to know how to get the highest performance from their algorithms. The course will take place, in English, from 31 March to 4 April in the CERN Technical Training Center. Few places are still available. Registrations are opened on the Technical Training page. More information on our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your que...

  7. CERN Technical Training 2006: WBTechT offers online training

    CERN Multimedia

    Davide Vitè

    2006-01-01

    The 2006 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTO to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING technical.training@cern.ch

  8. CERN Technical Training 2006: WBTechT offers online training

    CERN Multimedia

    Davide Vitè

    2006-01-01

    The 2006 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months'unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTO to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING technical.training@cern.ch

  9. CERN Technical Training 2006 - WBTechT offers online training

    CERN Multimedia

    2006-01-01

    The 2006 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months'unlimited access. Visit the WBTechT portal, or the WBTechT information page at http://www.cern.ch/TechnicalTraining, and contact technical.training@cern.ch or your DTO to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING technical.training@cern.ch

  10. CERN Technical Training 2005: "Introduction to ANSYS"

    CERN Multimedia

    Davide Vitè

    2005-01-01

    Course Session (28.6 - 1.7.2005) The following course session is scheduled in the framework of the CERN Technical Training Programme 2005, and in collaboration with CAD-FEM AG (CH): Introduction to ANSYS (course in English): 28.6 - 1.7.2005 (4 days, 6 places available, estimated cost: approx. 1'200.- CHF per person). The price quoted above may vary, depending on the number of confirmed participants. If you are interested in attending the above course session, please discuss with your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at http://www.cern.ch/TechnicalTraining/ under "Places Available", with the detailed course programmes. Due to the short notice, please send at the same time an e-mail to Technical.Training@cern.ch, announcing your registration. The complete training offer of ANSYS courses at CERN can be found at the same website, in the Mechanical Design curriculum, Finite Element Methods section. Organiser: Davide Vit&egr...

  11. CERN Technical Training: Digital Signal Processors

    CERN Multimedia

    HR Department

    2009-01-01

    A new training is going to be held at CERN on the ADSP SHARC Family. The “System Development and Programming with the Analog Devices' SHARC Family” course is a 3.5-day hands-on training on Analog Devices SHARC DSPs, focusing on the latest ‘368/9 and 37x families. General DSP architecture, peripherals available, booting up process and DSP code development will be covered. Hardware tools, debugging and hardware design guidelines will be introduced as well. The course id designed for System Designers needing to make informed decisions on design tradeoffs, Hardware Designers needing to develop external interfaces, and Code Developers needing to know how to get the highest performance from their algorithms. The course will take place, in English, from 31 March to 4 April in the CERN Technical Training Center. Few places are still available. Registrations are opened on the Technical Training page. More information on our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or conta...

  12. CERN Technical Training 2005: WBTechT offers online training

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The 2005 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTO to find out more information.

  13. CERN Technical Training - New courses available at CERN!

    CERN Multimedia

    HR Department

    2010-01-01

    1. - The “JavaScript for web development” is a 3 day course. This hands-on JavaScript training course provides the knowledge needed to design and develop dynamic web pages using JavaScript. It introduces students to JavaScript and how the language can be used to turn static HTML pages into dynamic, interactive web pages. Students will learn the syntax of the JavaScript language, the Document Object Model, form validation, cookies, how to create functions. This course is for Web programmers who want to learn how to make their Web pages more interactive by using JavaScript. The course will take place, in English, from 5 to 7 May 2010 in the CERN Technical Training Centre. Registrations are open on the Technical Training page. For more information on our catalogue or for questions/comments, contact us at Technical.Training@cern.ch 2. - The “Web 2.0 development with AJAX” is a 3 day course. This hands-on AJAX course provides the knowledge needed to design and develop ...

  14. CERN Technical Training: Autumn 2007 Course Catalogue

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007. You may find the full updated Technical Training course programme in our web-catalogue. OFFICE SOFTWARE CERN EDMS MTF en pratique F 4.9 1/2 d WORD 2007 (Short Course III) - How to work with long documents E/F 14.9 1/2 d FrontPage 2003 - niveau 1 E/F 17-18.9 2 d WORD 2007 - Niveau1: ECDL F 20.-21-9 2 d ACCESS 2007 - Level 1: ECDL E 20-21.9 2 d EXCEL 2007 (Short Course I) - How to work with Formulae E/F 21.9 1/2 d CERN EDMS Introduction E 24.9 1 d Java 2 Enterprise Edition - Part 1: Web Applications E 24-25.9 2 d Outlook 2007 (Short Course II) - Calendar, Tasks and Notes E/F 28.9 1/2 d Outlook 2007 (Short Course III) - Meeting and Delegation ...

  15. CERN Technical Training - New courses available at CERN!

    CERN Multimedia

    HR Department

    2010-01-01

    1. - The “Web 2.0 development with AJAX” is a 3 day course. This hands-on AJAX course provides the knowledge needed to design and develop Web 2.0 websites. Through a series of lectures and practical examples you will learn the power of the JavaScript XML Http request object and how it can be used to add advanced interactivity to your website. This course gives an overview of the main AJAX frameworks and Web 2.0 techniques. The course will take place, in English, from 28 to 30 June 2010 in the CERN Technical Training Centre. Registrations are open on the Technical Training page. For more information on our catalogue or for questions/comments, contact us at Technical.Training@cern.ch 2. - “CAO = Allegro Design Entry HDL Front-to-Back Flow v16.3” is a 3 day course. In this course, you will learn how to create board-level schematic designs with Design Entry HDL. You will explore the integration between Design Entry HDL and other tools in the design flow, including the A...

  16. CERN Technical Training: Open Courses (July 2007)

    CERN Multimedia

    2007-01-01

    The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: Automate de Sécurité (French): -> POSTPONED > from 9 to 11 October 2007 ! 10.7.-12.7.2007 (3 days, full) JCOP - Joint PVSS - JCOP Framework 09.07-12.07.2007 (5 days, full) CERN - EDMS - Introduction 10.07.2007 (1 day, 5 places available) Oracle - HTML DB 2.0: Develop Web Applications (English): 11.7.-13.7.2007 (3 days, 5 places available) Technique du vide (French): 11.7.-12.7.2007 (2 days, full) ANSYS - Classical (French) 16.7.-20.7.2007 (5 days, 2 places available) CERN - EDMS - MTF en pratique 17.07.2007 (1 day, 7 places available) Oracle - Programming with PL/SQL (English): 17.7.-19.7.2007 (3 days, 1 place available) WORD 2007 - Niveau 1 ECDL 24.7.-25.7.2007 (2 days, 8 places available) Introduction to Databases and Database Design (English) 24.7.-25.7.2007 (2 days, 3 places available) Technique du vide (French): 24.7.-25.7.2007 (2 days, 6 place...

  17. CERN Technical Training: LABVIEW courses include RADE

    CERN Multimedia

    HR Department

    2009-01-01

    The contents of "LabView Basic I" and "LabView Intermediate II" trainings have been recently changed to include, respectively, an introduction and an expert training on the Rapid Application Development Environment (RADE). RADE is a LabView-based application developed at CERN to integrate LabView in the accelerator and experiment control infrastructure. It is a suitable solution to develop expert tools, machine development analysis and independent test facilities. The course names have also been changed to "LabVIEW Basics I with RADE Introduction" and "LabVIEW Intermediate II with Advanced RADE Application". " LabVIEW Basics I with RADE Introduction" is designed for: Users preparing to develop applications using LabVIEW, or NI Developer Suite; users and technical managers evaluating LabVIEW or NI Developer Suite in purchasing decisions; users pursuing the Certified LabVIEW Developer certification. The course prepare...

  18. CERN Technical Training: LABVIEW courses include RADE

    CERN Multimedia

    HR Department

    2009-01-01

    The contents of the "LabView Basic I" and "LabView Intermediate II" courses have recently been changed to include, respectively, an introduction to and expert training in the Rapid Application Development Environment (RADE). RADE is a LabView-based application developed at CERN to integrate LabView in the accelerator and experiment control infrastructure. It is a suitable solution to developing expert tools, machine development analysis and independent test facilities. The course names have also been changed to "LabVIEW Basics I with RADE Introduction" and "LabVIEW Intermediate II with Advanced RADE Application". " LabVIEW Basics I with RADE Introduction" is designed for: Users preparing to develop applications using LabVIEW, or NI Developer Suite; users and technical managers evaluating LabVIEW or NI Developer Suite in purchasing decisions; users pursuing the Certified LabVIEW Developer certification. The course pr...

  19. CERN Technical Training: LABVIEW courses include RADE

    CERN Multimedia

    HR Department

    2009-01-01

    The contents of the "LabView Basic I" and "LabView Intermediate II" courses have recently been changed to include, respectively, an introduction to and expert training in the Rapid Application Development Environment (RADE). RADE is a LabView-based application developed at CERN to integrate LabView in the accelerator and experiment control infrastructure. It is a suitable solution to developing expert tools, machine development analysis and independent test facilities. The course names have also been changed to "LabVIEW Basics I with RADE Introduction" and "LabVIEW Intermediate II with Advanced RADE Application". " LabVIEW Basics I with RADE Introduction" is designed for: Users preparing to develop applications using LabVIEW, or NI Developer Suite; users and technical managers evaluating LabVIEW or NI Developer Suite in purchasing decisions; users pursuing the Certified LabVIEW Developer certification. The course prepares participants to develop test and measurement, da...

  20. Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Would you need to enhance your skills in Microsoft Office applications or Outlook? A new "blended learning" course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on April 1st, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while ...

  1. CERN Technical Training Programme: Learning for the LHC!

    CERN Multimedia

    2003-01-01

    In collaboration with AS and AC divisions, the Technical Training Programme is launching EVM Hands-on Tutorials specifically designed for those people involved in the current EVM for LHC exercise. The goal of the EVM Hands-on Training Sessions is to provide insight in Earned Value Management as implemented at CERN. Following this course will enable you to understand the EVM methodology, the tools used at CERN, the procedures used for the data-collection and data-reporting and assist you in analysing cost & schedule variances. The course is an intensive 2-hour 'hands-on' training session. If you are interested in this course, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training web pages: http://www.cern.ch/TechnicalTraining/

  2. CERN Technical Training Programme: Learning for the LHC !

    CERN Multimedia

    2003-01-01

    In collaboration with AS and AC divisions, the Technical Training Programme is launching EVM Hands-on Tutorials specifically designed for those people involved in the current EVM for LHC exercise. The goal of the EVM Hands-on Training Sessions is to provide insight in Earned Value Management as implemented at CERN. Following this course will enable you to understand the EVM methodology, the tools used at CERN, the procedures used for the data-collection and data-reporting and assist you in analysing cost & schedule variances. The course is an intensive 2-hour 'hands-on' training session. If you are interested in this course, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training web pages: http://www.cern.ch/TechnicalTraining/

  3. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Windows Vista\t(Français)\t11.07\t½ journée SOFTWARE AND SYSTEM TECHNOLOGIES Advanced Python-Hands-on\t(English)\t07-09.07\t3 days MECHANICAL DESIGN ANSYS CFX\t(Français)\t28-31.07\t4 jours If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at: http://cta.cern.ch/cta2/f?p=110:9 under ‘Technical Training’ with the detailed course program. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. CERN Technical Training courses are open only to members of the CERN personnel (staff members and fellows; associates, stude...

  4. CERN Technical Training Programme: Learning for the LHC !

    CERN Document Server

    2003-01-01

    CLEAN-2002: Working in a Cleanroom CLEAN-2002 is a free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed. If you are interested in CLEAN-2002, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training pages: http://www.cern.ch/TechnicalTraining/ The next session, in English, will be on Friday, 11 April 2003 (afternoon). Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

  5. CERN Technical Training Programme: Learning for the LHC!

    CERN Multimedia

    CLEAN-2002: Working in a Cleanroom CLEAN-2002 is a free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed. If you are interested in CLEAN-2002, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training pages: http://www.cern.ch/TechnicalTraining/ The next session in French will be on Thursday, 4 September 2003 (afternoon), and in English on Thursday, 23 October 2003 (afternoon). Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

  6. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE CERN EDMS for Engineers (English) 20.03\t1 day CERN EDMS for Local Administrators (English) 27-28.03 2 days Word 2007: Short course I: HowTo. work with AutoTasks (Bilingual) 31.03 0.5 day/jour Word 2007: Short course II: HowTo mail merge (Bilingual)\t31.03\t0.5 day/jour Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t0.5 jour Sharepoint Collaboration Worskpace\t(Français) 07-08.04\t2 jours Windows VISTA (Français)\t04.04\t1 jour CERN EDMS MTF in practice (English)\t09.04\t0.5 day Word 2007 : Niveau 1 ECDL (Français) ...

  7. CERN Technical Training: available Places in forthcoming Courses

    CERN Document Server

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 Novelties\t(English)\t03.03\t1 day Sharepoint designer / Frontpage, Niveau 2\t(Français) 06-07.03 2 jours CERN EDMS Introduction (Français) 12.03 1 jour Sharepoint Collaboration Worskpace\t(Français) 17-18.03 2 jours CERN EDMS for Engineers (English) 20.03\t1 day CERN EDMS for Local Administrators (English) 27-28.03 1 day Word 2007: Short course I: HowTo. work with AutoTasks (Bilingual) 31.03 0.5 day/jour Word 2007: Short course II: HowTo mail merge (Bilingual)\t31.03\t0.5 day/jour Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t1 jour...

  8. CERN Technical Training: available Places in forthcoming Courses

    CERN Document Server

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE CERN EDMS Introduction (Français) 12.03 1 jour Sharepoint Collaboration Worskpace\t(Français) 17-18.03 2 jours CERN EDMS for Engineers (English) 20.03\t1 day CERN EDMS for Local Administrators (English) 27-28.03 1 day Word 2007: Short course I: HowTo. work with AutoTasks (Bilingual) 31.03 0.5 day/jour Word 2007: Short course II: HowTo mail merge (Bilingual)\t31.03\t0.5 day/jour Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t1 jour In Design: Introduction (Français)\t07-08.04\t2 jours Windows VISTA (Français)\t...

  9. CERN Technical Training: available Places in forthcoming Courses

    CERN Document Server

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). CERN EDMS for Local Administrators (English) 27-28.03 2 days Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t0.5 jour Windows VISTA (Français)\t04.04\t1 jour Sharepoint Collaboration Worskpace\t(Français) 07-08.04\t2 jours CERN EDMS MTF in practice (English)\t09.04\t0.5 day Word 2007 : Niveau 1 ECDL (Français) 10-11.04\t2 jours Indico - Meeting Organization\t(Français)\t18.04\t1 day Indico – Conference Organization\t(Français)\t18.04\t1 day Word 2007: Niveau 2 ECDL\t(Français)\t28-29.04\t2 jours Excel 2007 – Niveau 2 ECDL (Français)\t05-06.05\t2 jours In Design: Introduct...

  10. CERN Technical Training: available Places in forthcoming Courses

    CERN Document Server

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Word 2007 – Level 1: ECDL\t(Français)\t15-16.06\t2 jours CERN EDMS for Local Administrators\t(English)\t16-17.06\t2 days EXCEL 2007 – Level 2: ECDL\t(English)\t25-26.06\t2 days CERN EDMS for Engineers\t(English)\t26.06\t1 day Office 2007 – Novelties\t(French)\t29.06\t1 day Novelties of Excel 2007\t(Français)\t30.06\t1 jour EXCEL 2007 – level 1: ECDL\t(Français)\t06-7.07\t2 jours Indico – Meeting Organization\t(English)\t07.07\t2 hours Indico – Conference Organization\t(Français)\t07.07\t3 hours CERN EDMS MTF in practice\t(Français)\t08.07\t3.5 heures SOFTWARE AND SYSTEM TECHNOLOGIES Web Applications with Oracle Application Express (APEX) 3.2\t(English)\t16-19.06\t4 days JCOP – Finite State Machines in the JCOP...

  11. CERN Technical Training: available Places in forthcoming Courses

    CERN Document Server

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 Novelties (English) – 03.03 - 1 day Sharepoint designer / Frontpage, Niveau 2 – (Français) - 06-07.03 - 2 jours CERN EDMS Introduction (Français) - 12.03 - 1 jour Sharepoint Collaboration Worskpace (Français) - 17-18.03 - 2 jours CERN EDMS for Engineers (English) - 20.03 - 1 day CERN EDMS for Local Administrators (English) - 27.03 - 1 day Word 2007: Short course I: HowTo. work with AutoTasks (Bilingue/Bilingual) - 31.03 – 0.5 day/jour Word 2007: Short course II: HowTo mail merge (Bilingue/Bilingual) - 31.03 – 0.5 day/jour Excel 2007: Short course III: How to pivot tables (Bilingue/Bilingual) - 01.04 - 0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingue/Bilingual) - 01.04 -...

  12. CERN Technical training: Available places in forthcoming courses

    CERN Document Server

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies ITIL Foundations (version 3) EXAMINATION\t13-DEC-10\t13-DEC-10\tEnglish\t1 hour Electronic design Cours de base Automation du bâtiment\t15-DEC-10\t17-DEC-10\tFrench\t3 jours Office software Sharepoint Collaboration Workspace\t13-DEC-10\t14-DEC-10\tEnglish\t2 days If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found here under ‘Technical Training’ with the detailed course program. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. CERN Technical Training courses are open only to members of the CERN per...

  13. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. *************************************** Software and System Technologies Oracle - Programming with PL/SQL 28-JUN-10 30-JUN-10 English 3 days Project Development using Python  29-JUN-10  02-JUL-10  English 4 days JAVA - Level 2 05-JUL-10 08-JUL-10 English 4 days Electronic Design CAO = Allegro Design Entry HDL Front-to-Back Flow v16.3  28-JUN-10 30-JUN-10 French 3 jours LabVIEW Data ...

  14. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. *************************************** Software and System Technologies JAVA - Level 2 05-JUL-10 08-JUL-10 English 4 days JCOP - Finite State Machines in the JCOP Framework  22-JUN-10 24-JUN-10 English 3 days Le Langage C (ANSI et C99) 24-JUN-10 02-JUL-10 English 4 days Oracle - Programming with PL/SQL  28-JUN-10  30-JUN-10  English 3 days Project Development using Python 29-JUN-10 ...

  15. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE Travailler sur Windows Vista au CERN (free IT tutorial) F 30.10 1 h Introduction to Collaboration Workspaces using SharePoint (free IT tutorial) E 31.10 1h30 Lisez vos emails, et plus encore, avec Outlook 2007 (free IT tutorial) F 1.11 1h ACCESS 2007 - Level 2: ECDL E 1.-2.11 2 d Excel 2007 (Short Course III) - How to pivot tables F/E 09.11 0.5 d Introduction to Sharepoint E 15.11 1 d Nouveauté office 2007 - Powerpoint 2007 E/F 16.11 1 d Excel 2007 (Short Course IV) - How to link cells, worksheets and workbooks ...

  16. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 2: Object-Oriented and Generic Programming    25-MAY-10    28-MAY-10    English    3 days CERN openlab Multi-threading and Parallelism Workshop    04-MAY-10    05-MAY-10    English    2 days ITIL Foundations (version 3) EXAMINATION    29-APR-10    29-APR-10    English    1 hour JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans    21-JUN-10    23-JUN-10 &...

  17. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies Business Objects Basic\t5-Nov-09\t6-Nov-09\tFrench C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\tEnglish C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls\t3-Nov-09\t6-Nov-09\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\tEnglish JAVA - Level 1\t12-Oct-09\t14-Oct-09\tEnglish JAVA - Level 2\t16-Nov-09\t19-Nov-09\tEnglish JAVA 2 Enterprise Edition - Part 1: Web Applications\t22-Oct-09\t23-Oct-09\tEnglish JCOP - Finite State Machines in the J...

  18. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\t3\tEnglish C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls\t3-Nov-09\t6-Nov-09\t4\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\t2\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\t2\tEnglish Developing secure software\t14-Sep-09\t14-Sep-09\t0.5\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\t1\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\t4\tEnglish ITIL Foundations (version 3)\t14-Sep-09\t16-Sep-09\t3\tEnglish ITIL Foundations (version 3)\t12-Oct-09\t14-Oct-09\t3\tEnglish ITIL Foundations (version 3)\t18-Nov-09\t20-Nov-09\t3\tEnglish JAVA...

  19. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies Business Objects Basic\t5-Nov-09\t6-Nov-09\tFrench C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\tEnglish C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls\t3-Nov-09\t6-Nov-09\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\tEnglish JAVA - Level 1\t12-Oct-09\t14-Oct-09\tEnglish JAVA - Level 2\t16-Nov-09\t19-Nov-09\tEnglish JAVA 2 Enterprise Edition - Part 1: Web Applications\t22-Oct-09\t23-Oct-09\tEnglish JCOP - Finite State Machines in the J...

  20. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\t3\tEnglish C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls\t3-Nov-09\t6-Nov-09\t4\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\t2\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\t2\tEnglish Developing secure software\t14-Sep-09\t14-Sep-09\t0.5\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\t1\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\t4\tEnglish ITIL Foundations (version 3)\t14-Sep-09\t16-Sep-09\t3\tEnglish ITIL Foundations (version 3)\t12-Oct-09\t14-Oct-09\t3\tEnglish ITIL Foundations (version 3)\t18-Nov-09\t20-Nov-09\t3\tEng...

  1. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies Business Objects Basic\t5-Nov-09\t6-Nov-09\tFrench C++ Programming Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09\t7-Oct-09\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\tEnglish Hands-On Object-Oriented and Generic Programming in C++\t3-Nov-09\t6-Nov-09 Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\tEnglish JAVA - Level 1\t12-Oct-09\t14-Oct-09\tEnglish JAVA - Level 2\t16-Nov-09\t19-Nov-09\tEnglish JAVA 2 Enterprise Edition - Part 1: Web Applications\t22-Oct-09\t23-Oct-09\tEnglish JCOP - Finite State Machines in the JCOP Framework\t10-...

  2. CERN Technical Training: available Places in forthcoming Courses

    CERN Document Server

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE EXCEL 2007 – Level 2: ECDL\t(English)\t25-26.06\t2 days CERN EDMS for Engineers\t(English)\t26.06\t1 day Office 2007 – Novelties\t(French)\t29.06\t1 day Novelties of Excel 2007\t(Français)\t30.06\t1 jour EXCEL 2007 – level 1: ECDL\t(Français)\t06-7.07\t2 jours Indico – Meeting Organization\t(English)\t07.07\t2 hours Indico – Conference Organization\t(Français)\t07.07\t3 hours CERN EDMS MTF in practice\t(Français)\t08.07\t3.5 heures SOFTWARE AND SYSTEM TECHNOLOGIES JCOP – Finite State Machines in the JCOP Framework\t(English)\t23-25.06\t3 days XML – Introduction\t(English)\t25-26.06\t2 days Business Object Basic\t(French)\t29-30.06\t2 jours JCOP – Joint PVSS-JCOP Framework\t(English)\t29.06-03.07\t4.5 days MECHA...

  3. CERN Technical Training: Open Places for September 2007 Courses

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2007. You may find the full Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=300 ) or in next weeks paper bulletin. OFFICE SOFTWARE Introduction to Dreamweaver MX (French): 3.9.-4.9.2007 (2 days, places available) CERN EDMS MTF en pratique (French): 4.9.2007 – 9:00-12:30 (1/2 day, places available) Word 2007 (Short Course III) – How to work with long documents (Bilangue): 14.9.2007 – 14:00-17:30 (1/2 day, places available) Word 2007 Niveau 1 (French): 20.9.-21-9.2007 (2 days, places available) ACCESS 2007 – Level 1: ECDL (English): 20.9.-21.9.2007 – 9:00-17:30 (2 days, places available) Excel 2007 (Short Course I) – How to work with formulae (Bilangue): 21.9.2007 – 14:00-17:30 (1/2 day, places available) CERN EDMS Introduction (English): 24.09.2007 (1 day, places available) Outlook 2007 (Short Course II) – Calendar, Task...

  4. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the 2007 CERN Technical Training Programme and still have places available. You may find the full, updated Technical Training course programme on our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE FrontPage 2003 – Level 1\tE\t29-30.11\t2 d Word 2007 – niveau 2 : ECDL\tF\t13-14.12\t2 d SOFTWARE AND SYSTEM TECHNOLOGIES JAVA – Level 1\tE\t03-05.12\t3 d ELECTRONIC DESIGN LabVIEW Base 1 F\t03-05.12\t3 d LabVIEW Basics 2\tE\t06-07.12\t2 d MECHANICAL DESIGN AutoCAD Mechanical 2006\tF\t27-28.11\t2 d Technique du vide\tF\t12-13.11\t2 d If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO and apply electronically via EDH from the course description pages that can be found at: http://cta.cern.ch/cta2/f?p=110:9 under ‘Technical Training’ with the detailed course program. Registration for all courses is always open – sessions for the less-reque...

  5. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Access 2007 – Niveau 2: ECDL\t(Français)\t01-04.07\t4 ½ journées Windows Vista\t(Français)\t11.07\t½ journée SOFTWARE AND SYSTEM TECHNOLOGIES Oracle 10g Certified Professional\t(English)\t30.06-04.07\t5 days Advanced Python-Hands-on\t(English)\t07-09.07\t3 days Hands-On Design Patterns for Object-oriented Programming (English)\t02-04.07\t3 days MECHANICAL DESIGN ANSYS CFX\t(Français)\t28-31.07\t4 jours If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at: http://cta.cern.ch/cta2/f?p=110:9 under ‘Technical Training’ with the detailed course program. Registration for all courses is alw...

  6. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 –Novelties\tE\t03.03\t1 d Sharepoint designer (Frontpage) – Niveau 2\tF\t05-06.03\t2 d CERN EDMS - Introduction\tF\t12.03\t1 d CERN EDMS for Engineers\tE\t20.03\t1 d CERN EDMS for Local Administrators\tE\t37.03\t1 d Word 2007 (Short course I: HowTo. work with AutoTasks)\tB\t31.03\t0.5 d Word 2007 (Short course II: HowTo mail merge)\tB\t31.03\t0.5 d SOFTWARE AND SYSTEM TECHNOLOGIES Java 2 Enterprise Edition – Part 1: Web Applications\tE\t03-04.03\t2 d Perl 5 – Introduction\tE\t05.03\t1 d JCOP – Joint PVSS\tE\t10-14.03\t4 d Python – Hands-on Introduction\tE\t26-28.03\t3 d ELECTRONIC DESIGN Electrostatique Discharge Protection ESD\tF\t29.2\t0.5 d Altium designer – migration for occasional PCAD users\tF\t04-06.03\t3 d LabVIEW Intermediaire 1\tF\t10-12.03...

  7. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You can find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE WORD 2007 - level 1 : ECDL\t(English)\t05-06.02\t2 days ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours CERN EDMS – Introduction\t(English)\t10.02\t1 day CERN EDMS – Introduction\t(Français)\t11.02\t1 jour Sharepoint Designer (Frontpage)- Level 1\t(Français)\t12-13.02\t2 jours Windows Vista\t(Français)\t24.02\t3 heures ½ EXCEL 2007 – Level 2: ECDL\t(Français)\t26-27.02\t2 jours Indico – Meeting Organisation\t(Français)\t02.03\t2 heures Indico – Conference Organisation\t(English)\t02.03\t3 hours Excel 2007 – Level 1: ECDL\t(Français)\t03-04.03\t2 jours CERN EDMS for Local Administrators\t(English)\t04-05.03\t2 days Novelties Office 2007: Word 2007\t(Français)\t09.03\t1 jour Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 d...

  8. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You can find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours CERN EDMS – Introduction\t(English)\t10.02\t1 day CERN EDMS – Introduction\t(Français)\t11.02\t1 jour Windows Vista\t(Français)\t24.02\t3 heures ½ EXCEL 2007 – Level 2: ECDL\t(Français)\t26-27.02\t2 jours Indico – Meeting Organisation\t(Français)\t02.03\t2 heures Indico – Conference Organisation\t(English)\t02.03\t3 hours Excel 2007 – Level 1: ECDL\t(Français)\t03-04.03\t2 jours CERN EDMS for Local Administrators\t(English)\t04-05.03\t2 days Novelties Office 2007: Word 2007\t(Français)\t09.03\t1 jour Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 days Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours SOFTWARE AND SYSTEM TECHNOLOGIES Oracle 10 g Certified Prof...

  9. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You can find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours CERN EDMS – Introduction\t(English)\t10.02\t1 day CERN EDMS – Introduction\t(Français)\t11.02\t1 jour Sharepoint Designer (Frontpage)- Level 1\t(Français)\t12-13.02\t2 jours Windows Vista\t(Français)\t24.02\t3 heures ½ EXCEL 2007 – Level 2: ECDL\t(Français)\t26-27.02\t2 jours Indico – Meeting Organisation\t(Français)\t02.03\t2 heures Indico – Conference Organisation\t(English)\t02.03\t3 hours Excel 2007 – Level 1: ECDL\t(Français)\t03-04.03\t2 jours CERN EDMS for Local Administrators\t(English)\t04-05.03\t2 days Novelties Office 2007: Word 2007\t(Français)\t09.03\t1 jour Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 days Access 2007 – Level 2: ECDL\t(Français)\t30-31.0...

  10. CERN Technical Training: available Places in forthcoming Courses

    CERN Document Server

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE CERN EDMS – Introduction\t(English)\t05.06\t1 day Sharepoint Collaboration Workspace\t(Français)\t08-09.06\t2 jours Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t11.06\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t11.06\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t12.06\t0.5 jour/day Excel 2007 (Short Course IV) – HowTo…Link cells, worksheets and workbook\t(Bilingual)\t12.06\t0.5 jour/day Word 2007 – Level 1: ECDL\t(Français)\t15-16.06\t2 jours CERN EDMS for Local Administrators\t(English)\t16-17.06\t2 days EXCEL 2007 – Level 1: ECDL\t(Français)\t18-19.06\t2 jours EXCEL 2007 – Level 2: ECDL\t(English)\t25-26.06\t2 days CERN EDMS ...

  11. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE CERN EDMS – Introduction\t(Français)\t26.06\t1 jour Videoconferencing and collaborative tools\t(English)\t27.06\t2 hours CERN EDMS MTF in practice\t(Français)\t27.06\t½ journée A hands-on overview of EVO\t(English)\t27.06\t½ day CERN EDMS for Local Administrators\t(Français)\t30.06-01.07\t2 jours Excel 2007 – Level 2 ECDL\t(English)\t30.06-01.07\t2 days Access 2007 – Niveau 2: ECDL\t(Français)\t01-04.07\t4 ½ journées Hands-On Design Patterns for Object-oriented Programming (English)\t02-04.07\t3 days Windows Vista Advanced\t(Français)\t10.07\t½ journée Windows Vista\t(Français)\t11.07\t½ journée SOFTWARE AND SYSTEM TECHNOLOGIES JCOP – Finite State Machines in the JCOP Framework\t(English)\t24-26.06\t3 days ...

  12. CERN TECHNICAL TRAINING 2002: LEARNING FOR THE LHC !

    CERN Multimedia

    Davide Vitè

    2002-01-01

    - FEED-2002 - Analogue and Digital Techniques in Closed Loop Regulation Applications   FEED-2002 is a two-term course, given by CERN engineers in a new format within the framework of the Technical Training Programme. The course will review the techniques dealing with closed loop systems, focussing on time-invariant linear systems. FEED-2002 is composed of two terms, and of an open Introductory Lecture. Attendance to the Introductory Lecture is a prerequisite to the participation to both terms. All sessions will take place on Tuesdays afternoons in the Training Centre Auditorium, from 14h30 to 17h00. The course will be in English, with questions and answers also in French.   Introductory Lecture: AD/DA Conversion Techniques - An Overview Technical Training Seminar, 17 September 2002 (free attendance, no registration required) Lecturer: John Pett, SL-PO Programme: The modern Analogue to Digital (AD) and Digital to Analogue (DA) conversion methods. Digital representations of time-varying, rea...

  13. CERN TECHNICAL TRAINING 2002: LEARNING FOR THE LHC!

    CERN Multimedia

    Davide Vitè

    2002-01-01

    - FEED-2002 - Analogue and Digital Techniques in Closed Loop Regulation Applications   FEED-2002 is a two-term course, given by CERN engineers in a new format within the framework of the Technical Training Programme. The course will review the techniques dealing with closed loop systems, focussing on time-invariant linear systems. FEED-2002 is composed of two terms, and of an open Introductory Lecture. Attendance to the Introductory Lecture is a prerequisite to the participation to both terms. All sessions will take place on Tuesdays afternoons in the Training Centre Auditorium, from 14h30 to 17h00. The course will be in English, with questions and answers also in French.   Introductory Lecture: AD/DA Conversion Techniques - An Overview Technical Training Seminar, 17 September 2002 (free attendance, no registration required) Lecturer: John Pett, SL-PO Programme: The modern Analogue to Digital (AD) and Digital to Analogue (DA) conversion methods. Digital representations of time-varyi...

  14. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Excel 2007 – Level 1 : ECDL\t(French)\t06-07.10\t2 jours Project Planning with MS-Project\t(English)\t06-10.10\t2 days CERN EDMS For Local Administrators\t(French)\t08-09.10\t2 jours Excel 2007 (Short course IV) – HowTo…link cells, worksheets and workbooks (Bilingual)\t10.10\t½ day Outlook 2007 (Short course III) – Meetings and Delegation\t(Bilingual)\t10.10\t3 hours Introduction to Dreamweaver MX\t(Français)\t13-14.10\t2 jours Indico – Meeting Organization\t(Français)\t15.10\t2 heures Indico – Conference Organization\t(Français)\t15.10\t3 heures Word 2007 – Niveau 2 : ECDL\t(Français)\t20-21.10\t2 jours Novelties Office 2007 : PowerPoint 2007 (English)\t27.10\t1 day Sharepoint Collaboration Workspace\t(Français)\t06-07.11\t1 ½ day Excel 2007 ...

  15. CERN Technical Training: available places in forthcoming courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Word 2007 – Level 1 : ECDL\t(Français)\t22-23.09\t2 jours Novelties Office 2007: Word 2007\t(Français)\t30.09\t1 jour Excel 2007 (Short course II) – HowTo…format your worksheet for printing\t(Bilingual)\t03.10\t0.5 day Windows Vista Advanced\t(English)\t03.10\t0.5 day Excel 2007 – Level 1 : ECDL\t(English)\t06-07.10\t2 days Project Planning with MS-Project\t(English)\t06-17.10\t2 days CERN EDMS For Local Administrators\t(French)\t08-09.10\t2 jours Excel 2007 (Short course IV) – HowTo…link cells, worksheets and workbooks (Bilingual)\t10.10\t½ day Outlook 2007 (Short course III) – Meetings and Delegation\t(Bilingual)\t10.10\t½ day Introduction to Dreamweaver MX\t(Français)\t13-14.10\t2 jours Indico – Meeting Organization\t(Français)\t15.10\t2 heu...

  16. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Indico – Meeting Organization\t(Français)\t02.03\t3 heures Excel 2007 – Level 1: ECDL\t(Français)\t03-04.03\t2 jours CERN EDMS for Local Administrators\t(Français)\t04-05.03\t2 days Novelties Office 2007: Word 2007\t(Français)\t09.03\t1 jour Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 days Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(English)\t27-28.04\t1 jour ½ Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format ...

  17. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Sharepoint Collaboration Worskpace\t(Français) 07-08.04\t2 jours CERN EDMS MTF in practice (English)\t09.04\t0.5 day Word 2007 : Niveau 1 ECDL (Français) 10-11.04\t2 jours Indico - Meeting Organization\t(Français)\t18.04\t1 day Indico – Conference Organization\t(Français)\t18.04\t1 day Word 2007: Niveau 2 ECDL\t(Français)\t28-29.04\t2 jours Excel 2007 – Niveau 2 ECDL (Français)\t05-06.05\t2 jours In Design: Introduction (Français)\t13-14.05\t2 jours Sharepoint Collaboration Worskpace\t(English)\t19-20.05\t2 days Sharepoint Designer (Frontpage) – Level 1 ECDL\t(English)\t29-30.05\t2 days SOFTWARE AND SYSTEM TECHNOLOGIES C++ Programming Part 1 – Java 2 Enterprise Edition: Part 2 Enterprise JavaBeans (English)\t14-16.04 3 days Oracle SQL (En...

  18. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 – Novelties\t(Français)\t29.09\t1 jour Novelties Office 2007: Word 2007\t(Français)\t30.09\t1 jour Excel 2007 (Short course II) – HowTo…format your worksheet for printing\t(Bilingual)\t03.10\t0.5 day Windows Vista Advanced\t(English)\t03.10\t0.5 day Excel 2007 – Level 1 : ECDL\t(English)\t06-07.10\t2 days Project Planning with MS-Project\t(English)\t06-17.10\t2 days CERN EDMS For Local Administrators\t(French)\t08-09.10\t2 jours Excel 2007 (Short course IV) – HowTo…link cells, worksheets and workbooks (Bilingual)\t10.10\t½ day Outlook 2007 (Short course III) – Meetings and Delegation\t(Bilingual)\t10.10\t½ day Introduction to Dreamweaver MX\t(Français)\t13-14.10\t2 jours Indico – Meeting Organization\t(Français)\t15.10\t2 heures Ind...

  19. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and System Technologies Business Objects Basic - 5-Nov-09 - 6-Nov-09 - French C++ Programming Part 1 - Hands-On Introduction - 26-Oct-09 - 28-Oct-09 - English CERN openlab Multi-threading and Parallelism Workshop - 11-Nov-09 - 12-Nov-09 - English CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t6-Oct-09 - 7-Oct-09 - English Emacs - way beyond Text Editing\t29-Oct-09 - 29-Oct-09 - English Hands-On Object-Oriented and Generic Programming in C++ - 3-Nov-09 - 6-Nov-09 Intermediate Linux System Administration - 19-Nov-09 - 24-Nov-09 - English JAVA - Level 1\t12-Oct-09 - 14-Oct-09 - English JAVA - Level 2 - 16-Nov-09\t19-Nov-09 - English JAVA 2 Enterprise Edition - Part 1: Web Applications - 22-Oct-09 - 23-Oct-09 - English JCOP...

  20. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Business Objects advanced\t20-Oct-10\t20-Oct-10\tEnglish\t1 day C++ Part 2: Object-Oriented and Generic Programming\t22-Nov-10\t25-Nov-10\tEnglish\t4 days CERN openlab Multi-threading and Parallelism Workshop\t9-Nov-10\t10-Nov-10\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t22-Sep-10\t23-Sep-10\tEnglish\t2 days ITIL Foundations (version 3)\t22-Nov-10\t24-Nov-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t28-Oct-10\t28-Oct-10\tEnglish\t1 hour JAVA - Level 1\t25-Nov-10\t29-Nov-10\tEnglish\t3 days JAVA 2 Enterprise Edition - Part 1: Web Applications\t27-Oct-10\t28-Oct-10\tEnglish\t2 days JCOP - Finite State Machines in the JCOP Framework\t17-Nov-10\t19-Nov-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t11-Oct-10\t15-Oct-10\tEnglish\t4...

  1. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Windows Vista\t(Français)\t30.01\t3 heures ½ EXCEL 2007 level 1: ECDL\t(English)\t02-03.02\t2 days WORD 2007 - level 1 : ECDL\t(English)\t05-06.02\t2 days ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours CERN EDMS – Introduction\t(English)\t10.02\t1 day CERN EDMS – Introduction\t(Français)\t11.02\t1 jour Sharepoint Designer (Frontpage)- Level 1\t(Français)\t12-13.02\t2 jours EXCEL 2007 – Level 2: ECDL\t(Français)\t26-27.02\t2 jours SOFTWARE AND SYSTEM TECHNOLOGIES Oracle – SQL\t(English)\t02-04.02\t3 days Oracle Databases: Memory Management (10g & 11g) (English)\t05-06.02\t2 days JAVA 2 Enterprise Edition – Part 1: Web Applications\t(English)\t09-10.02\t2 days JCOP – Joint PVSS-JCOP Framework\t(English)\t09-13.02\t3 ½ da...

  2. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t0.5 jour Windows VISTA (Français)\t04.04\t1 jour Sharepoint Collaboration Worskpace\t(Français) 07-08.04\t2 jours CERN EDMS MTF in practice (English)\t09.04\t0.5 day Word 2007 : Niveau 1 ECDL (Français) 10-11.04\t2 jours Indico - Meeting Organization\t(Français)\t18.04\t1 day Indico – Conference Organization\t(Français)\t18.04\t1 day Word 2007: Niveau 2 ECDL\t(Français)\t28-29.04\t2 jours Excel 2007 – Niveau 2 ECDL (Français)\t05-06.05\t2 jours In Design: Introduction (Français)\t13-14.05\t2 jours Sharepoint Col...

  3. Technical Training: CERN Technical Training 2004 - Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    Monique Duval

    2004-01-01

    Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the ...

  4. Technical Training: CERN Technical Training 2004 - Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    Monique Duval

    2004-01-01

    Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on 7 September, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the app...

  5. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE Project Planning with MS-Project E 21 + 28/11 2 d Excel 2007 Level 2: ECDL E 26-27.11 2 d Introduction to Sharepoint E 23.11 1 d FrontPage 2003 - Level 1 E 29-30.11 2 d Excel 2007 - niveau 1 : ECDL F 10-11.12 2 d Word 2007 - niveau 2 : ECDL F 13-14.12 2 d SOFTWARE AND SYSTEM TECHNOLOGIES JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans E 12-14.11 3 d Oracle - Develop Web-based Applications with PL/SQL E 15-16.11 2 d Oracle 10g Certif...

  6. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue. OFFICE SOFTWARE Excel 2007 Level 2: ECDL E 26-27.11 2 d Introduction to Sharepoint E 23.11 1 d FrontPage 2003 - Level 1 E 29-30.11 2 d Excel 2007 - niveau 1 : ECDL F 10-11.12 2 d Word 2007 - niveau 2 : ECDL F 13-14.12 2 d SOFTWARE AND SYSTEM TECHNOLOGIES JAVA - Level 1 E 03-05.12 3 d XML - Introduction E 06-07.12 2 d ELECTRONIC DESIGN Advanced VHDL for FPGA Design E 26-30-11 5 d LabVIEW Base 1 F 03-05.12 3 d LabVIEW Basics 2 E ...

  7. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue. OFFICE SOFTWARE Project Planning with MS-Project E 21 + 28/11 2 d Excel 2007 Level 2: ECDL E 26-27.11 2 d Introduction to Sharepoint E 23.11 1 d FrontPage 2003 - Level 1 E 29-30.11 2 d Excel 2007 - niveau 1 : ECDL F 10-11.12 2 d Word 2007 - niveau 2 : ECDL F 13-14.12 2 d SOFTWARE AND SYSTEM TECHNOLOGIES Oracle 10g Certified Professional E 19-23.11 5 d JAVA - Level 1 E 03-05.12 3 d XML - Introduction E 06-07.12 2 d ELECTRONIC DESIGN Advanced VHDL ...

  8. CERN Technical Training: available places in forthcoming courses

    CERN Multimedia

    HR Department

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Developing secure software    07-DEC-09    07-DEC-09    0.5 day    English Intermediate Linux System Administration    19-Nov-09    24-Nov-09    4 days    English JAVA - Level 2    16-Nov-09    19-Nov-09    4 days    English JCOP - Joint PVSS-JCOP Framework    23-Nov-09    27-Nov-09    4.5 days    English Oracle Database SQL Tun...

  9. CERN technical training: available places in forthcoming courses

    CERN Multimedia

    HR Department

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Developing secure software\t07-DEC-09\t07-DEC-09\t0.5 day\tEnglish PERL 5 - Advanced Aspects\t10-DEC-09\t10-DEC-09\t1 day\tEnglish Project Development using Python\t01-DEC-09\t04-DEC-09\t4 days\tEnglish Electronic design Advanced VHDL for FPGA Design\t30-Nov-09\t04-DEC-09\t5 days\tEnglish LabVIEW - Working efficiently with LabVIEW 8\t07-DEC-09\t07-DEC-09\t1 day\tEnglish LabVIEW Basic I with RADE introduction\t30-Nov-09\t02-DEC-09\t3 days\tEnglish LabVIEW Basics 2\t03-DEC-09\t04-DEC-09\t2 days\tEnglish Mechanical design Office software Dreamweaver CS3 - Level 2\t04-DEC-09\t04-DEC-09\t1 jour\tFrench CERN EDMS - Introduction\t02-dec-09\t02-dec-09\t1 jour\tFrench Sharepoint Designer (Frontpage) - Level 1\t07-DEC-09\t08-DEC-09\t2 days\tEnglish Special course Egroups training\t15-DE...

  10. CERN Technical Training: new courses on computer security

    CERN Multimedia

    HR Department

    2009-01-01

    Two new trainings are available at CERN concerning computer security. • How to create secure software? The "Developing secure software" course (3.5 hours) is designed for software programmers, both for regular software and Web applications. It covers main aspects of security in different phases of the software development lifecycle. The last, optional hour discusses security issues of Web application developers. This course, although not hands-on, is interactive and full of real-life examples. The first session of this course will take place, in English, on 21 April in the CERN Technical Training Center. More sessions will be scheduled in 2009. • How to safely navigate and send mails? The "Secure e-mail and Web browsing" course is an entry-level 1.5-hour training aimed to show how to detect and avoid typical security pitfalls encountered when e-mailing and browsing the Web. It is designed for non-technical users of Internet Explorer and Outlook. The first sessions o...

  11. CERN Technical Training 2007: IT3T - IT Technical Training Tutorials (Autumn 2007)

    CERN Multimedia

    2007-01-01

    CERN Technical Training and the Internet Services group of the IT department (IT/IS) are jointly organizing a series of free tutorials, addressing some topics of common interest: the IT Technical Training Tutorials (IT3T). The first IT3T series will be offered in October 2007, in French, with the following schedule: IT3T/2007/1 "Introduction to Collaboration Workspaces using SharePoint", October 23rd , 14:30-16:00, Alexandre Lossent IT3T/2007/2 "What is new in Office 2007", October 25th, 14:30-15:30, Emmanuel Ormancey IT3T/2007/3 "Working with Windows Vista at CERN", October 30th, 14:30-15:30, Michal Kwiatek IT3T/2007/4 "Read your mail and more with Outlook 2007", November 1st, 14:30-15:30, Sebastien Dellabella All IT Technical Training Tutorials will take place in the Training Centre Auditorium (building 593, room 11), at 14h30. The tutorials are free of charge, but separate registration to each is required. Participation to any of the tutorials is open: attendance to any ...

  12. CERN Technical Training: Places available for forthcoming courses

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE CERN EDMS Introduction E 24.9 1 d Outlook 2007 (Short Course II) - Calendar, Tasks and Notes E/F 28.9 0.5 d Outlook 2007 (Short Course III) - Meeting and Delegation E/F 28.9 0.5 d Excel 2007 Niveau 2 : ECDL F 11-12.10 2 d Excel 2007 (Short Course II) - How to format your worksheet for printing E/F 12.10 0.5 d Excel 2007 (Short Course I) - How to work with Formulae E/F 21.9 1/2 d Nouveauté Word 2007 E/F 22.10 1 d Nouveauté Excel 2007 E/F 23.10 1/2 d Excel 2007 Level 2 : ECDL F 25-26.10 2 d In...

  13. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the 2007 CERN Technical Training Programme and still have places available. You may find the full, updated Technical Training course programme on our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE PowerPoint 2007 – Level/Niveau 1: ECDL\t(E/F)\t14-15.01\t(2 d) Windows XP\tF\t18.01 0.5 d Word - Niveau 1\t(F)\t21-22.01\t(2 d) Excel - Niveau 1\t(F)\t24-25.01\t(2 d) DreamWeaver\t(F)\t28-29.01\t(2 d) Sharepoint Designer (Frontpage) Niveau 1\t(F)\t31.01-01-02\t(2 d) SOFTWARE AND SYSTEM TECHNOLOGIES JCOP - Joint PVSS-JCOP Framework\t(E)\t28.01-01.02\t(4.5 d) ELECTRONIC DESIGN Introduction - Electromagnetic Compatibility (EMC) / Compatibilité électromagnetique (CEM)\t(E/F)\t16.01\t(0.5 d) S7 Distributed Safety Systems (E)\t23-25.01\t(3 d) Applications - Electromagnetic Compatibility (EMC) / Compatibilité électromagnetique (CEM)\t(E/F)\t30.01\t(0.5 d) SPECIAL COURSE AXEL: Introduction to Particle Accelerators\t(E)\t29...

  14. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Novelties of Excel 2007\t(Français)\t04.12\t1 jour Outlook 2007 (Short Course I) – E-mail (Bilingual) 05.12\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual) 05.12\t3 hours Powerpoint 2007 – Level 1:ECDL\t(English)\t08-09.12\t2 days Windows Vista\t(Français)\t12.12\t½ jour Office 2007 – Novelties\t(Français)\t15.12\t1 jour Office 2007 – Novelties\t(English)\t08.01\t1 day Novelties of EXCEL 2007\t(English)\t09.01\t1 day WORD 2007 - level 2 : ECDL\t(Français)\t12-13.01\t2 jours EXCEL 2007 - Level 2: ECDL\t(English)\t15-16.01\t2 days Novelties Office 2007: WORD 2007\t(Français)\t19.01\t1 jour EXCEL 2007 - level 1 : ECDL\t(English)\t20-21.01\t2 days Sharepoint Collaboration Workspace\t(Fran�...

  15. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2012-01-01

    The following course sessions are scheduled in the framework of the 2012 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Drupal in a Day 30/01/2012 30/01/2012 English Object-Oriented Analysis and Design using UML 07/02/2012 09/02/2012 English CERN openlab/Intel Computer Architecture and Performance Tuning Workshop 15/02/2012 16/02/2012 English Python - Hands-on Introduction 20/02/2012 23/02/2012 English ITIL Foundations (version 3) 22/02/2012 24/02/2012 English Drupal Site Building 05/03/2012 06/03/2012 English Joint PVSS-JCOP Framework 05/03/2012 09/03/2012 English Oracle Database SQL Tuning 07/03/2012 09/03/2012 English Oracle - SQL 12/03/2012 14/03/2012 English ITIL Foundations (version 3) EXAMINATION 19/03/2012 19/03/2012 English Object-oriented Design Patterns 19/03/2012 21/03/2012 English Python: Advanced Hands-On 26/03/2012 29/03/2012 English Ele...

  16. CERN Technical Training 2003: Learning for the LHC!

    CERN Multimedia

    2003-01-01

    AXEL-2003  -  Introduction to Particle Accelerators   AXEL-2003 is a course given at CERN within the framework of the Technical Training Programme. The course will present an introduction to particle accelerators. Known in the past as the PS Complex Operation Course (or the "PS Shutdown Course"), and organised by the ex-PS division until last year, it is now organised as a joint venture between the AB division and Technical Training, and open to a wider CERN community. The AXEL-2003 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course and the course supports will be in English, with questions and answers also in French. Lectur...

  17. CERN Technical Training 2003: Learning for the LHC!

    CERN Document Server

    2003-01-01

    AXEL-2003 - Introduction to Particle Accelerators AXEL-2003 is a course given at CERN within the framework of the Technical Training Programme. The course will present an introduction to particle accelerators. Known in the past as the PS Complex Operation Course (or the "PS Shutdown Course"), and organised by the ex-PS division until last year, it is now organised as a joint venture between the AB division and Technical Training, and open to a wider CERN community. The AXEL-2003 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course and the course supports will be in English, with questions and answers also in French. Lectures wil...

  18. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Secure e-mail and Web browsing\t(English)\t22.04\t1.5 hour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(English)\t27-28.04\t1 jour ½ Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t30.04\t0.5 jour/day Excel 2007 (Short Course IV) – HowTo…Link cells, worksheets and work...

  19. CERN Technical Training: available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Agile Project Management with Scrum,\t11-FEB-10\t12-FEB-10,\t2 days,\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop,\t09-FEB-10\t10-FEB-10,\t2 days,\tEnglish Developing secure software,\t22-Mar-10\t22-Mar-10,\t1.5 hour,\tEnglish Introduction to Databases and Database Design,\t11-Mar-10\t12-Mar-10,\t2 days,\tEnglish JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans,\t22-Mar-10\t24-Mar-10,\t3 days,\tEnglish JCOP - Finite State Machines in the JCOP Framework,\t9-Mar-10\t11-Mar-10,\t3 days,\tEnglish JCOP - Joint PVSS-JCOP Framework,\t22-FEB-10\t26-FEB-10,\t4.5 days,\tEnglish Object-Oriented Analysis and Design using UML,\t22-Mar-10\t24-Mar-10,\t3 days,\tEnglish Secure coding for Java,\t12-FEB-10\t12-FEB-10,\t1 day, English Secure coding for Perl,\t10...

  20. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Agile Project Management with Scrum 11-FEB-10 12-FEB-10 2 days English C++ Part 1 - Hands-On Introduction 17-Mar-10 19-Mar-10 3 days English CERN openlab/Intel Computer Architecture and Performance Tuning Workshop 09-FEB-10 10-FEB-10 2 days English Developing secure software 22-Mar-10 22-Mar-10 0,5 days English Emacs - way beyond Text Editing 26-Mar-10 26-Mar-10 1 day English Introduction to Databases and Database Design 11-Mar-10 12-Mar-10 2 days English JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans 22-Mar-10 24-Mar-10 3 days English JCOP - Finite State Machines in the JCOP Framework 9-Mar-10 11-Mar-10 3 days English JCOP - Joint PVSS-JCOP Framework 22-FEB-10 26-FEB-10 3 days English Object-Oriented Analysis and Design using UML 23-Mar-10 25...

  1. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Excel 2007 – Niveau 2 : ECDL\t(Français)\t08-09.09\t2 jour Excel 2007 (short course I) – HowTo..Work with formulae\t(Bilingual)\t15.09\t1 day Sharepoint Collaboration Workspace\t(English)\t15-16.09\t1 ½ day Windows Vista Advanced\t(Français)\t15.09\t0.5 jour Novelties of Excel 2007\t(English)\t16.09\t1 day WORD 2007 (Short Course III) - HowTo... Work with long documents\t(Bilingual)\t19.09\t3 hours Word 2007 – Level 1 : ECDL\t(Français)\t22-23.09\t2 jours Excel 2007 (Short course II) – HowTo…format your worksheet for printing\t(Bilingual)\t03.10\t0.5 day Windows Vista Advanced\t(English)\t03.10\t0.5 day Excel 2007 – Level 1 : ECDL\t(English)\t06-07.10\t2 days Project Planning with MS-Project\t(English)\t06-17.10\t2 d...

  2. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Introduction to Dreamweaver MX\t(Français)\t13-14.10\t2 jours Indico – Meeting Organization\t(Français)\t15.10\t2 heures Indico – Conference Organization\t(Français)\t15.10\t3 heures Sharepoint Designer (Frontpage) – Level 1\t(Français)\t16-17.10\t2 jours Word 2007 – Niveau 2 : ECDL\t(Français)\t20-21.10\t2 jours Novelties Office 2007 : PowerPoint 2007 (English)\t27.10\t1 day Sharepoint Collaboration Workspace\t(Français)\t06-07.11\t1 ½ day Excel 2007 – Level 2: ECDL\t(English)\t10-11.11\t2 days Excel 2007 (Short course III) – HowTo…Pivot tables (Bilingual)\t14.11\t½ day Word 2007 (Short course II) – HowTo…Mail merge (Bilingual)\t14.11 ½ day Sharepoint Designer (Frontpage) – Niveau 2\t(Français)\t17-18.11\t2 jours Word 2007 ...

  3. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2011-01-01

    The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t08-Feb-11\t09-Feb-11\tEnglish\t2 days Introduction to Databases and Database Design\t10-Mar-11\t11-Mar-11\tEnglish\t2 days JAVA - Level 2\t17-Jan-11\t20-Jan-11\tEnglish\t4 days JCOP-Joint PVSS-JCOP Framework\t14-Mar-11\t18-Mar-11\tEnglish\t4.5 days ORACLE-SQL\t16-Mar-11\t18-Mar-11\tEnglish\t3 days Oracle Databases: Advanced PL/SQL Programming\t21-Mar-11\t23-Mar-11\tEnglish\t3 days Linux LPI 101 - Introduction à Linux et LPI 102 Administration systèmes sur Linux\t8-Mar-11\t11-Mar-11\tFrançais\t4 jours Electronic design Siemens - STEP7: Level 1\t15-feb-11\t18-feb-11\tFrançais\t4 jours Mechanical Design ANSYS Workbench advanced\t31-Jan-11\t03-Feb-11\tEnglish\t4 days ANS...

  4. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Novelties Office 2007 : PowerPoint 2007 (English)\t27.10\t1 day Sharepoint Collaboration Workspace\t(Français)\t06-07.11\t1 ½ day Excel 2007 – Level 2: ECDL\t(English)\t10-11.11\t2 days Word 2007 (Short course III) – HowTo…Work with long documents\t(Bilingual)\t13.11\t½ jour Excel 2007 (Short course III) – HowTo…Pivot tables (Bilingual)\t14.11\t½ day Word 2007 (Short course II) – HowTo…Mail merge (Bilingual)\t14.11\t½ day Sharepoint Designer (Frontpage) – Niveau 2\t(Français)\t17-18.11\t2 jours Word 2007 – Level 1: ECDL\t(English)\t24-25.11\t2 days Indico – Meeting Organization\t(Français)\t27.11\t2 heures Indico – Conference Organization\t(Français)\t27.11\t3 heures Sharepoint Designer (Frontpa...

  5. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Word 2007 – Level 2 : ECDL\t(English)\t04-05.05\t2 days Excel 2007 – Level 2 : ECDL\t(English)\t07-08.05\t2 days Novelties Office 2007 : Word 2007\t(Français)\t11.05\t1 jour Secure e-mail and Web browsing\t(Français)\t19.05\t1.5 heure Outlook 2007 (Short Course 1) – E-mail\t(Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course III) – Meetings and Delegation (Bilingual)\t26.05\t3 hours Outlook 2007 (Short Course II) – HowTo…Mail merge (with Outlook)\t(Bilingual)\t26.05\t3 hours Word 2007 (Short Course III) - Working with long documents: Styles and tables of content\t(Bilingual)\t28.05\t3 hours Indico – Meeting Organization\t(English)\t05.06\t2 hours Indico ...

  6. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Novelties Office 2007 : PowerPoint 2007 (English)\t27.10\t1 day Excel 2007 – Level 2: ECDL\t(English)\t10-11.11\t2 days Word 2007 (Short course III) – HowTo…Work with long documents: styles and tables of contents\t(Bilingual)\t13.11\t3 hour Excel 2007 (Short course III) – HowTo…Pivot tables (Bilingual)\t14.11\t½ day Sharepoint Designer (Frontpage) – Niveau 2\t(Français)\t17-18.11\t2 jours Word 2007 – Level 1: ECDL\t(English)\t24-25.11\t2 days Indico – Meeting Organization\t(Français)\t27.11\t2 heures Indico – Conference Organization\t(Français)\t27.11\t3 heures Excel 2007 – Level 1: ECDL\t(English)\t01-02.12\t2 days Novelties of Excel 2007\t(Français)\t04.12\t1 jour Outlook 2007 (Short Course I) – E-mail (Bilin...

  7. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Excel 2007 – Level 2: ECDL\t(English)\t10-11.11\t2 days Word 2007 (Short course III) – HowTo…Work with long documents: styles and tables of contents\t(Bilingual)\t13.11\t3 hours\tExcel 2007 (Short course III) – HowTo…Pivot tables (Bilingual)\t14.11\t½ day Word 2007 – Level 1: ECDL\t(English)\t24-25.11\t2 days Indico – Meeting Organization\t(Français)\t27.11\t2 heures Indico – Conference Organization\t(Français)\t27.11\t3 heures Excel 2007 – Level 1: ECDL\t(English)\t01-02.12\t2 days Novelties of Excel 2007\t(Français)\t04.12\t1 jour Outlook 2007 (Short Course I) – E-mail (Bilingual) 05.12\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual) 05.12\t3 hours Powerpoint 2007 ...

  8. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2011-01-01

    The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Business Objects Basic\t21-Feb-11\t22-Feb-11\t2 days\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t15-Feb-11\t16-Feb-11\t2 days\tEnglish Introduction to Databases and Database Design\t10-Mar-11\t11-Mar-11\t2 days\tEnglish JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t16-Mar-11\t18-Mar-11\t3 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t5-Apr-11\t7-Apr-11\t3 days\tEnglish JCOP - Joint PVSS-JCOP Framework\t14-Mar-11\t18-Mar-11\t4.5 days\tEnglish Linux LPI 101 - Introduction à Linux et LPI 102 Administration systèmes sur Linux\t8-Mar-11\t11-Mar-11\t4 days\tEnglish Oracle - SQL\t16-Mar-11\t18-Mar-11\t3 days\tEnglish Oracle Databases: Advanced PL/SQL Programming\t21-Mar-11\t23-Mar-11\t3 days\tEnglish El...

  9. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Agile Project Management with Scrum\t11-FEB-10\t12-FEB-10\t2 days\tEnglish C++ Part 1 - Hands-On Introduction\t17-Mar-10\t19-Mar-10\t3 days\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t09-FEB-10\t10-FEB-10\t2 days\tEnglish Developing secure software\t22-Mar-10\t22-Mar-10\t0.5 day\tEnglish Emacs - way beyond Text Editing\t26-Mar-10\t26-Mar-10\t1 day English Introduction to Databases and Database Design\t11-Mar-10\t12-Mar-10\t2 days\tEnglish JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t22-Mar-10\t24-Mar-10\t3 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t9-Mar-10\t11-Mar-10\t3 days\tEnglish JCOP - Joint PVSS-JCOP Framework\t22-FEB-10\t26-FEB-10\t5 days\tEnglish Object-Oriented Analysis and Design using UML\t23-Mar-10\t25...

  10. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Sharepoint Collaboration Workspace\t(Français)\t06-07.11\t1 ½ jour Excel 2007 – Level 2: ECDL\t(English)\t10-11.11\t2 days Word 2007 (Short course III) – HowTo…Work with long documents: styles and tables of contents\t(Bilingual)\t13.11\t3 hours Excel 2007 (Short course III) – HowTo…Pivot tables (Bilingual)\t14.11\t½ day Word 2007 – Level 1: ECDL\t(English)\t24-25.11\t2 days Indico – Meeting Organization\t(Français)\t27.11\t2 heures Indico – Conference Organization\t(Français)\t27.11\t3 heures Excel 2007 – Level 1: ECDL\t(English)\t01-02.12\t2 days Novelties of Excel 2007\t(Français)\t04.12\t1 jour Outlook 2007 (Short Course I) – E-mail (Bilingual) 05.12\t3 hours Outlook 2007 (Short Course II) – Cale...

  11. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 days Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Secure e-mail and Web browsing\t(English)\t22.04\t1.5 hour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(English)\t27-28.04\t1 jour ½ Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t30.04\t0.5 jour/day Excel 2007 (Short Course IV) – HowT...

  12. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Sharepoint Collaborative Services\t(Francais)\t02-03.06\t2 days Indico – Meting Organization\t(Français)\t03.06\t2 heures Indico – Conference Organization\t(Français)\t03.06\t3 heures Introduction to Dreamweaver MX\t(English)\t05-06.06\t2 days Outlook 2007 (Short Course II) – Calendar, Tasks and Notes\t(Bilingue)\t09.06\t½ day/jour Outlook 2007 (Short Course III) – Meetings and Delegation\t(Bilingual)\t09.06\t0.5 day Excel 2007 – Niveau 1 : ECDL\t(Français)\t10-11.06\t2 jours Sharepoint Designer (Frontpage) – Level 2\t(English)\t12-13.06\t2 days PowerPoint 2007 – Niveau 1: ECDL\t(Français)\t19-20.06\t2 jours Videoconferencing and collaborative tools\t(English)\t27.06\t2 hours A hands-on overview of EVO\t(English)\t27.06\t½ day Excel 2007 – Level...

  13. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Outlook 2007 (Short Course II) – Calendar, Tasks and Notes\t(Bilingue)\t09.06\t½ day/jour Outlook 2007 (Short Course III) – Meetings and Delegation\t(Bilingual)\t09.06\t0.5 day Excel 2007 – Niveau 1 : ECDL\t(Français)\t10-11.06\t2 jours Sharepoint Designer (Frontpage) – Level 2\t(English)\t12-13.06\t2 days PowerPoint 2007 – Niveau 1: ECDL\t(Français)\t19-20.06\t2 jours Videoconferencing and collaborative tools\t(English)\t27.06\t2 hours A hands-on overview of EVO\t(English)\t27.06\t½ day Excel 2007 – Level 2 ECDL\t(English)\t30.06-01.07\t2 days Hands-On Design Patterns for Object-oriented Programming (English)\t02-04.07\t3 days Windows Vista\t(Français)\t11.07\t½ jour SOFTWARE AND SYSTEM TECHNOLOGIES Java – Level 2\t(English)\t9-12.06\t4 days ...

  14. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2011-01-01

    The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Business Objects Basic\t21-feb-11\t22-FEB-11\tEnglish\t2 days CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t08-Feb-11\t09-Feb-11\tEnglish\t2 days Introduction to Databases and Database Design\t10-Mar-11\t11-Mar-11\tEnglish\t2 days JAVA 2 Entreprise Edition - Part 2: Enterprise JavaBeans\t16-Mar-11\t18-Mar-11\tEnglish\t3 days JCOP-Joint PVSS-JCOP Framework\t14-Mar-11\t18-Mar-11\tEnglish\t4.5 days Linux LPI 101 - Introduction à Linux et LPI 102 Administration systèmes sur Linux\t8-Mar-11\t11-Mar-11\tFrançais\t4 jours ORACLE-SQL\t16-Mar-11\t18-Mar-11\tEnglish\t3 days Oracle Databases: Advanced PL/SQL Programming\t21-Mar-11\t23-Mar-11\tEnglish\t3 days Electronic design LabVIEW for beginners\t21-Mar-11\t23-Mar-11\tBilingual\t3 days/...

  15. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE ACCESS 2007 – Niveau 1 : ECDL\t(Français)\t27-28.05\t2 jours Sharepoint Designer (Frontpage) – Level 1\t(English)\t29-30.05\t2 days Sharepoint Collaborative Services\t(Francais)\t02-03.06\t2 days Indico – Meting Organization\t(Français)\t03.06\t2 heures Indico – Conference Organization\t(Français)\t03.06\t3 heures Introduction to Dreamweaver MX\t(English)\t05-06.06\t2 days Outlook 2007 (Short Course II) – Calendar, Tasks and Notes\t(Bilingue)\t09.06\t½ day/jour Outlook 2007 (Short Course III) – Meetings and Delegation\t(Bilingual)\t09.06\t0.5 day Excel 2007 – Niveau 1 : ECDL\t(Français)\t10-11.06\t2 jours Sharepoint Designer (Frontpage) – Level 2\t(English)\t12-13.06\t2 days PowerPoint 2007 – Niveau 1: ECDL...

  16. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Novelties Office 2007: Word 2007\tFrançais)\t09.03\t1 jour Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 days Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(English)\t27-28.04\t1 jour ½ Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t30.04\t0.5 jour/day ...

  17. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE ACCESS 2007 – Niveau 1 : ECDL\t(Français)\t27-28.05\t2 jours Sharepoint Designer (Frontpage) – Level 1\t(English)\t29-30.05\t2 days Sharepoint Collaborative Services\t(Francais)\t02-03.06\t2 days Indico – Meting Organization\t(Français)\t03.06\t2 heures Indico – Conference Organization\t(Français)\t03.06\t3 heures Introduction to Dreamweaver MX\t(English)\t05-06.06\t2 days Outlook 2007 (Short Course III) – Meetings and Delegation\t(Bilingual)\t09.06\t0.5 day Word 2007 (Short Course III) – HowTo….Work with long documents\t(Bilingual)\t09.06\t0.5 day Excel 2007 – Level 1 : ECDL\t(Français)\t10-11.06\t2 jours Sharepoint Designer (Frontpage) – Level 2\t(English)\t12-13.06\t2 days PowerPoint 2007 – Niveau 1: ECDL\t(Français)\t19-20.06\t2 jours Exce...

  18. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE WORD 2007 - level 2 : ECDL\t(Français)\t12-13.01\t2 jours EXCEL 2007 - Level 2: ECDL\t(English)\t15-16.01\t2 days Novelties Office 2007: WORD 2007\t(Français)\t19.01\t1 jour Windows Vista\t(Français)\t30.01\t3 heures ½ EXCEL 2007 level 1: ECDL\t(English)\t02-03.02\t2 days WORD 2007 - level 1 : ECDL\t(English)\t05-06.02\t2 days ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours Sharepoint Designer (Frontpage)- Level 1\t(Français)\t12-13.02\t2 jours SOFTWARE AND SYSTEM TECHNOLOGIES Linux System Administration\t(English)\t22-27.01\t4 days Oracle – SQL\t(English)\t02-04.02\t3 days Oracle Databases: Memory Management (10g & 11g) (English)\t05-06.02\t2 days JAVA 2 Enterprise Edition – Part 1: Web Applications\t(English)\t09-10.02\t2 days ...

  19. CERN Technical Training: new courses on computer security

    CERN Multimedia

    HR Department

    2009-01-01

    Two new trainings are available at CERN concerning computer security. • How to create secure software? The "Developing secure software" course (3.5 hours) is designed for software programmers, both for regular software and Web applications. It covers main aspects of security in different phases of the software development lifecycle. The last, optional hour discusses security issues of Web application developers. This course, although not hands-on, is interactive and full of real-life examples. The first session of this course will take place, in English, on 21 April in the CERN Technical Training Centre. More sessions will be scheduled in 2009. • How to safely navigate and send mails? The "Secure e-mail and Web browsing" course is an entry-level 1.5-hour course designed to show how to detect and avoid typical security pitfalls encountered when e-mailing and browsing the Web. It is designed for non-technical users of Internet Explorer and Outlook. The first sessions o...

  20. CERN Technical Training: new courses on computer security

    CERN Multimedia

    HR Department

    2009-01-01

    Two new trainings are available at CERN concerning computer security. • How to create secure software? The "Developing secure software" course (3.5 hours) is designed for software programmers, both for regular software and Web applications. It covers main aspects of security in different phases of the software development lifecycle. The last, optional hour discusses security issues of Web application developers. This course, although not hands-on, is interactive and full of real-life examples. The first session of this course will take place, in English, on 21 April in the CERN Technical Training Centre. More sessions will be scheduled in 2009. • How to safely navigate and send mails? The "Secure e-mail and Web browsing" course is an entry-level 1.5-hour course designed to show how to detect and avoid typical security pitfalls encountered when e-mailing and browsing the Web. It is designed for non-technical users of Internet Explorer and Outlook. The first sessions ...

  1. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Agile Project Management with Scrum\t15-Nov-10\t16-Nov-10\tEnglish\t2 days Business Objects advanced\t20-Oct-10\t20-Oct-10\tEnglish\t1 day C++ Part 2: Object-Oriented and Generic Programming\t22-Nov-10\t25-Nov-10\tEnglish\t4 days CERN openlab Multi-threading and Parallelism Workshop\t9-Nov-10\t10-Nov-10\tEnglish\t2 days ITIL Foundations (version 3)\t22-Nov-10\t24-Nov-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t28-Oct-10\t28-Oct-10\tEnglish\t1 hour JAVA - Level 1\t25-Nov-10\t29-Nov-10\tEnglish\t3 days JAVA 2 Enterprise Edition - Part 1: Web Applications\t27-Oct-10\t28-Oct-10\tEnglish\t2 days JCOP - Finite State Machines in the JCOP Framework\t17-Nov-10\t19-Nov-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t11-Oct-10\t15-Oct-10\tEnglish\t4.5 days Linux LPI 101 - Introdu...

  2. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Agile Project Management with Scrum\t15-Nov-10\t16-Nov-10\tEnglish\t2 days Business Objects advanced\t20-Oct-10\t20-Oct-10\tEnglish\t1 day C++ Part 2: Object-Oriented and Generic Programming\t22-Nov-10\t25-Nov-10\tEnglish\t4 days CERN openlab Multi-threading and Parallelism Workshop\t10-Nov-10\t11-Nov-10\tEnglish\t2 days Emacs - way beyond Text Editing\t09-DEC-10\t09-DEC-10\tEnglish\t3 days ITIL Foundations (version 3)\t22-Nov-10\t24-Nov-10\tEnglish\t1 day ITIL Foundations (version 3) EXAMINATION\t28-Oct-10\t28-Oct-10\tEnglish\t1 hour ITIL Foundations (version 3) EXAMINATION\t13-DEC-10\t13-DEC-10\tEnglish\t1 hour JAVA - Level 1\t25-Nov-10\t29-Nov-10\tEnglish\t3 days JAVA 2 Enterprise Edition - Part 1: Web Applications\t27-Oct-10\t28-Oct-10\tEnglish\t2 days JAVA 2 Enterprise Edition - Part 2: ...

  3. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and System Technologies Business Objects Basic - 5-Nov-09 - 6-Nov-09 - 2 - French C++ Part 1 - Hands-On Introduction - 26-Oct-09 - 28-Oct-09 - 3 - English C++ Part 2: Object-Oriented and Generic Programming - 3-Nov-09 - 6-Nov-09 - 4 - English CERN openlab Multi-threading and Parallelism Workshop - 11-Nov-09 - 12-Nov-09 - 2 - English Developing secure software - 07-DEC-09 - 07-DEC-09 - 0.5 - English Emacs - way beyond Text Editing - 29-Oct-09 - 29-Oct-09 - 1 - English Intermediate Linux System Administration - 19-Nov-09 - 24-Nov-09 - 4 - English JAVA - Level 2 - 16-Nov-09 - 19-Nov-09 - 4 - English JAVA 2 Enterprise Edition - Part 1: Web Applications - 22-Oct-09 - 23-Oct-09 - 2 - English JCOP - Finite State Machines in the JCOP Framework - 10-No...

  4. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Business Objects Basic\t18-Oct-10\t19-Oct-10\ttbc\t2 days Business Objects Advanced\t31.aug.10\t31.aug.10\tEnglish\t1 day Business Objects Advanced\t20-Oct-10\t20-Oct-10\tEnglish\t1 day C++ Part 1 - Hands-On Introduction\t20-Sep-10\t23-Sep-10\tEnglish\t4 days CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t22-Sep-10\t23-Sep-10\tEnglish\t2 days Developing secure software\t6-Sep-10\t6-Sep-10\tEnglish\t3,5 hours ISTQB International Software Testing Qualifications Board\t13-Sep-10\t16-Sep-10\tEnglish\t4 days ITIL Foundations (version 3)\t4-Oct-10\t6-Oct-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t28-Oct-10\t28-Oct-10\tEnglish\t1 hour JAVA 2 Entreprise Edition - Part 1: Web Applications\t27-Oct-10\t29-Oct-10\tEnglish\t2 days JCOP - Joint PVSS-JCOP Framew...

  5. CERN Technical training: available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Agile Project Management with Scrum\t11-FEB-10\t12-FEB-10\t2 days\tEnglish C++ Part 1 - Hands-On Introduction\t17-Mar-10\t19-Mar-10\t2 days\tEnglish CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t09-FEB-10\t10-FEB-10\t2 days\tEnglish Developing secure software\t22-Mar-10\t22-Mar-10\t2 days\tEnglish Emacs - way beyond Text Editing\t26-Mar-10\t26-Mar-10\t2 days\tEnglish Introduction to Databases and Database Design\t11-Mar-10\t12-Mar-10\t2 days\tEnglish ITIL Foundations (version 3)\t8-Mar-10\t10-Mar-10\t3 days\tEnglish ITIL Foundations (version 3)\t12-APR-10\t29-APR-10\t3 days\tEnglish ITIL Foundations (version 3) EXAMINATION\t25-Mar-10\t25-Mar-10\t1 hour\tEnglish JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t22-Mar-10\t24-Mar-10\t3 days\tEnglish JCOP - Fi...

  6. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Business Objects Basic\t18-Oct-10\t19-Oct-10\ttbc\t2 days Business Objects Advanced\t20-Oct-10\t20-Oct-10\tEnglish\t1 day CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t22-Sep-10\t23-Sep-10\tEnglish\t2 days ITIL Foundations (version 3) EXAMINATION\t28-Oct-10\t28-Oct-10\tEnglish\t1 hour JAVA 2 Entreprise Edition - Part 1: Web Applications\t27-Oct-10\t29-Oct-10\tEnglish\t2 days JCOP - Joint PVSS-JCOP Framework\t11-Oct-10\t15-Oct-10\tEnglish\t4,5 days Oracle Database SQL Tuning\t25-Oct-10\t27-Oct-10\tEnglish\t3 days Oracle Databases: Advanced PL/SQL Programming\t27-Sep-10\t29-Sep-10\tEnglish\t3 days PERL 5 - Introduction 25-Oct-10\t26-Oct-10\tEnglish\t2 days Python - Hands-on Introduction\t18-Oct-10\t21-Oct-10\tEnglish\t4 days Secure coding in C/C++\t12-Oct-10\t13-Oct-...

  7. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2011-01-01

    The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies JCOP - Finite State Machines in the JCOP Framework\t05-APR-11\t07-APR-11\t3 days\tEnglish JCOP - Joint PVSS-JCOP Framework\t09-MAY-11\t13-MAY-11\t4.5 days\tEnglish Object-oriented Design Patterns\t11-APR-11\t13-APR-11\t3 days\tEnglish Python - Hands-on Introduction\t09-MAY-11\t12-MAY-11\t4 days\tEnglish Python: Advanced Hands-On\t28-Mar-11\t31-Mar-11\t4 days\tEnglish JAVA - Level 1\t13-APR-11\t15-APR-11\t3 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t24-MAY-11\t26-MAY-11\t3 days\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t09-MAY-11\t10-MAY-11\t2 days\tEnglish ITIL Foundations (version 3)\t09-MAY-11\t11-MAY-11\t3 days\tEnglish ITIL Foundations (version 3) EXAMINATION\t23-MAY-11\t23-MAY-11\t1 hour\tEnglish Dealing efficiently with Oracle Performance Iss...

  8. CERN Technical Training: available Places in forthcoming Courses

    CERN Document Server

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Novelties Office 2007 : Word 2007\t(Français)\t11.05\t1 jour Secure e-mail and Web browsing\t(Français)\t19.05\t1.5 heure Outlook 2007 (Short Course 1) – E-mail\t(Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course III) – Meetings and Delegation (Bilingual)\t26.05\t3 hours Word 2007 (Short Course II) – HowTo…Mail merge (with Outlook)\t(Bilingual)\t26.05\t3 hours Word 2007 (Short Course III) - Working with long documents: Styles and tables of content\t(Bilingual)\t28.05\t3 hours Indico – Meeting Organization\t(English)\t05.06\t2 hours Indico – Conference Organization\t(Français)\t05.06\t3 hours Excel 2007 (Short Course I) –HowTo…Work with formulae (...

  9. CERN Technical Training: available Places in forthcoming Courses

    CERN Document Server

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Word 2007 – Level 1: ECDL\t(Français)\t24-25.11\t2 days Indico – Meeting Organization\t(Français)\t27.11\t2 heures Indico – Conference Organization\t(Français)\t27.11\t3 heures Excel 2007 – Level 1: ECDL\t(English)\t01-02.12\t2 days Novelties of Excel 2007\t(Français)\t04.12\t1 jour Outlook 2007 (Short Course I) – E-mail (Bilingual) 05.12\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual) 05.12\t3 hours Powerpoint 2007 – Level 1:ECDL\t(English)\t08-09.12\t2 days Windows Vista\t(Français)\t12.12\t½ jour Windows Vista Advanced\t(Français)\t12.12\t½ jour Office 2007 – Novelties\t(Français)\t15.12\t1 jour SOFTWARE AND SYSTEM TECHNOLOGIES Business Objects Basics\t(Français)\t17-1...

  10. CERN Technical Training: available places in forthcoming courses

    CERN Document Server

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Outlook 2007 (Short Course 1) – E-mail\t(Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual)\t25.05\t3 hours Word 2007 (Short Course III) - Working with long documents: Styles and tables of content (Bilingual)\t28.05\t3 hours Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t11.06\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t11.06\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t12.06\t0.5 jour/day Excel 2007 (Short Course IV) – HowTo…Link cells, worksheets and workbook\t(Bilingual)\t12.06\t0.5 jour/day Word 2007 – Level 1: ECDL\t(Français)\t15-...

  11. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Novelties Office 2007 : Word 2007\t(Français)\t11.05\t1 jour Secure e-mail and Web browsing\t(Français)\t19.05\t1.5 heure Outlook 2007 (Short Course 1) – E-mail\t(Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course III) – Meetings and Delegation (Bilingual)\t26.05\t3 hours Word 2007 (Short Course II) – HowTo…Mail merge (with Outlook)\t(Bilingual)\t26.05\t3 hours Word 2007 (Short Course III) - Working with long documents: Styles and tables of content\t(Bilingual)\t28.05\t3 hours Indico – Meeting Organization\t(English)\t05.06\t2 hours Indico – Conference Organization\t(Français)\t05.06\t3 hours Excel 2007 (Short Course I) –HowTo…Work with formulae\t(...

  12. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Word 2007 – Level 1: ECDL\t(Français)\t24-25.11\t2 days Indico – Meeting Organization\t(Français)\t27.11\t2 heures Indico – Conference Organization\t(Français)\t27.11\t3 heures Excel 2007 – Level 1: ECDL\t(English)\t01-02.12\t2 days Novelties of Excel 2007\t(Français)\t04.12\t1 jour Outlook 2007 (Short Course I) – E-mail (Bilingual) 05.12\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual) 05.12\t3 hours Powerpoint 2007 – Level 1:ECDL\t(English)\t08-09.12\t2 days Windows Vista\t(Français)\t12.12\t½ jour Windows Vista Advanced\t(Français)\t12.12\t½ jour Office 2007 – Novelties\t(Français)\t15.12\t1 jour SOFTWARE AND SYSTEM TECHNOLOGIES Business Objects Basics\t(Français)\t17-18...

  13. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Outlook 2007 (Short Course 1) – E-mail\t(Bilingual)\t25.05\t3 hours Outlook 2007 (Short Course II) – Calendar, Tasks and Notes (Bilingual)\t25.05\t3 hours Word 2007 (Short Course III) - Working with long documents: Styles and tables of content\t(Bilingual)\t28.05\t3 hours Indico – Meeting Organization\t(English)\t05.06\t2 hours Indico – Conference Organization\t(Français)\t05.06\t3 hours Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t11.06\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t11.06\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t12.06\t0.5 jour/day Excel 2007 (Short Course IV) – HowTo…Link cells, worksheets and workb...

  14. Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Would you need to enhance your skills in Microsoft Office applications or Outlook ? A new "blended learning" course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training course for Microsoft Applications. The next sessions will take place on the 19 and 26 February (Thursday mornings), with 8 participants at most. Course sessions will be self-paced and self-directed, with participants...

  15. Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Would you need to enhance your skills in Microsoft Office applications or Outlook ? A new "blended learning" course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training course for Microsoft Applications. The next session will take place on February 26, Thursday morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while ...

  16. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Windows Vista\t(Français)\t24.02\t3 heures ½ EXCEL 2007 – Level 2: ECDL\t(Français)\t26-27.02\t2 jours Excel 2007 – Level 1: ECDL\t(Français)\t03-04.03\t2 jours CERN EDMS for Local Administrators\t(Français)\t04-05.03\t2 days Novelties Office 2007: Word 2007\t(Français)\t09.03\t1 jour Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 days Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(English)\t27-28.04\t1 jour ½ Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t29.04\t0.5 jour/day Excel...

  17. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2011-01-01

    The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 1 - Hands-On Introduction\t25-Jan-11\t28-Jan-11\tEnglish\t4 days CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t15-Feb-11\t16-Feb-11\tEnglish\t2 days CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t08-Feb-11\t09-Feb-11\tEnglish\t2 days JAVA - Level 2\t17-Jan-11\t20-Jan-11\tEnglish\t4 days Python - Hands-on Introduction\t07-Feb-11\t10-Feb-11\tEnglish\t4 days Secure coding for Java\t12-Jan-11\t12-Jan-11\tEnglish\t1 day Secure coding for PHP\t14-Jan-11\t14-Jan-11\tEnglish\t1 day Secure coding for Python\t13-Jan-11\t13-Jan-11\tEnglish\t0.5 day Secure coding for Python\t13-Jan-11\t13-Jan-11\tEnglish\t0.5 day Electronic design Technologie S-Web\t12-Jan-11\t13-Jan-11\tFrench\t2 jours Mechanical Design ANSYS Workbench advanced\t31-Jan...

  18. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You can find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Windows Vista\t(Français)\t24.02\t3 heures ½ EXCEL 2007 – Level 2: ECDL\t(Français)\t26-27.02\t2 jours Indico – Meeting Organisation\t(Français)\t02.03\t2 heures Indico – Conference Organisation\t(English)\t02.03\t3 hours Excel 2007 – Level 1: ECDL\t(Français)\t03-04.03\t2 jours CERN EDMS for Local Administrators\t(Français)\t04-05.03\t2 days Novelties Office 2007: Word 2007\t(Français)\t09.03\t1 jour Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 days Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(Engli...

  19. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and System Technologies Business Objects Basic\t5-Nov-09\t6-Nov-09\t2\tEnglish C++ Part 1 - Hands-On Introduction\t26-Oct-09\t28-Oct-09\t3\tEnglish C++ Part 2: Object-Oriented and Generic Programming\t3-Nov-09\t6-Nov-09\t4\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\t2\tEnglish Developing secure software\t07-DEC-09\t07-DEC-09\t0.5\tEnglish Emacs - way beyond Text Editing\t29-Oct-09\t29-Oct-09\t1\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\t4\tEnglish JAVA - Level 2\t16-Nov-09\t19-Nov-09\t4\tEnglish JCOP - Finite State Machines in the JCOP Framework\t10-Nov-09\t12-Nov-09\t3\tEnglish JCOP - Joint PVSS-JCOP Framework\t23-Nov-09\t27-Nov-09\t4.5\tEnglish Oracle Database SQL Tuning\t07-DEC-09\t09-DEC-09\t3\tEnglish Oracle D...

  20. CERN technical training: available places in forthcoming courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). Software and system technologies Business Objects Basic\t5-Nov-09\t6-Nov-09\t2\tEnglish C++ Part 2: Object-Oriented and Generic Programming\t3-Nov-09\t6-Nov-09\t4\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t11-Nov-09\t12-Nov-09\t2\tEnglish Developing secure software\t07-DEC-09\t07-DEC-09\t0.5\tEnglish Intermediate Linux System Administration\t19-Nov-09\t24-Nov-09\t4\tEnglish JAVA - Level 2\t16-Nov-09\t19-Nov-09\t4\tEnglish JCOP - Finite State Machines in the JCOP Framework\t10-Nov-09\t12-Nov-09\t3\tEnglish JCOP - Joint PVSS-JCOP Framework\t23-Nov-09\t27-Nov-09\t4.5\tEnglish Oracle Database SQL Tuning\t07-DEC-09\t09-DEC-09\t3\tEnglish Oracle Databases: Advanced PL/SQL Programming\t2-Nov-09\t4-Nov-09\t3\tEnglish PERL 5 - Advanced Aspects\t10-DEC-09\t10-DEC-09\t1\tEnglish Proje...

  1. CERN technical training: available places in forthcoming courses

    CERN Multimedia

    HR Department

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Developing secure software\t07-DEC-09\t07-DEC-09\t0.5 day\tEnglish PERL 5 - Advanced Aspects\t10-DEC-09\t10-DEC-09\t1 day\tEnglish Electronic design LabVIEW - Working efficiently with LabVIEW 8\t07-DEC-09\t07-DEC-09\t1 day\tEnglish Mechanical design Office software Sharepoint Designer (Frontpage) - Level 1\t07-DEC-09\t08-DEC-09\t2 days\tEnglish Special course Egroups training\t15-DEC-09\t15-DEC-09\t0.5 jour\tFrench If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found here under ‘Technical Training’ with the detailed course program. Registration for all courses is always open – se...

  2. CERN Technical Training 2005: IT3T - IT Technical Training Tutorials (Summer 2005)

    CERN Multimedia

    Davide Vitè

    2005-01-01

    CERN Technical Training and the Internet Services group of the IT department (IT/IS) are jointly organizing a series of free tutorials, addressing some topics of common interest: the IT Technical Training Tutorials (IT3T). The next IT3T will be offered, in English, with the following schedule: IT3T/3 - Working remotely with Windows XP: June 28 (Michel Christaller) IT3T/4 - Editing Websites with FrontPage 2003: June 30 (Andreas Wagner) The IT Technical Training Tutorials will take place in the Training Centre Auditorium (building 593, room 11), from 14h30 to 15h30. The tutorials are free of charge, but separate registration to each is required. Participation to any of the tutorials is open: attendance to any tutorial is not a prerequisite to attend subsequent ones. If you are interested in attending, please discuss with your supervisor and/or your DTO, and apply electronically via EDH. Registered participants will be invited to each tutorial; attendance will be recorded in the personal training records. Mo...

  3. CERN Technical Training 2005: IT3T - IT Technical Training Tutorials (Summer 2005)

    CERN Multimedia

    Davide Vitè

    2005-01-01

    CERN Technical Training and the Internet Services group of the IT department (IT/IS) are jointly organizing a series of free tutorials, addressing some topics of common interest: the IT Technical Training Tutorials (IT3T). The next IT3T will be offered, in English, with the following schedule: IT3T/3 - Working remotely with Windows XP: June 28 (Michel Christaller) IT3T/4 - Editing Websites with FrontPage 2003: June 30 (Andreas Wagner) The IT Technical Training Tutorials will take place in the Training Centre Auditorium (building 593, room 11), from 14:30 to 15:30. The tutorials are free of charge, but separate registration to each is required. Participation to any of the tutorials is open: attendance to any tutorial is not a prerequisite to attend subsequent ones. If you are interested in attending, please discuss with your supervisor and/or your DTO, and apply electronically via EDH. Registered participants will be invited to each tutorial; attendance will be recorded in the personal training records. Mo...

  4. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE PowerPoint 2007 – Level/Niveau 1: ECDL\tE/F\t14-15.01\t2 d Windows XP\tF\t18.01\t0.5 d Word - Niveau 1\tF\t21-22.01\t2 d Excel - Niveau 1\tF\t24-25.01\t2 d DreamWeaver\tF\t28-29.01\t2 d Sharepoint Designer (Frontpage) Niveau 1\tF\t31-01.01-02\t2 d Introduction to Sharepoint E\t04.02\t1 d Word – Level 1\tE\t25-26.02\t2 d Excel – Level 1\tE\t28-29.02\t2 d SOFTWARE AND SYSTEM TECHNOLOGIES JCOP - Joint PVSS-JCOP Framework\tE\t28.01-01.02\t4.5 d Introduction to Object Oriented programming and UML\tE\t5-7.02\t3 d JCOP – Finite State Machines\tE\t19-21.02\t3 d ELECTRONIC DESIGN Introduction - Electromagnetic Compatibility (EMC) / Compatibilité électromagnetique (CEM)\tE/F\t16.01\t0.5 d S7 Distributed Safety Systems E\t23-25.01\t3 d ...

  5. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Powerpoint 2007 – Level 1:ECDL\t(English)\t08-09.12\t2 days Windows Vista\t(Français)\t12.12\t½ jour Office 2007 – Novelties\t(Français)\t15.12\t1 jour Office 2007 – Novelties\t(English)\t08.01\t1 day Novelties of EXCEL 2007\t(English)\t09.01\t1 day WORD 2007 - level 2 : ECDL\t(Français)\t12-13.01\t2 jours EXCEL 2007 - Level 2: ECDL\t(English)\t15-16.01\t2 days Novelties Office 2007: WORD 2007\t(Français)\t19.01\t1 jour Sharepoint Collaboration Workspace\t(Français)\t29-30.01\t1 jour ½ Windows Vista\t(Français)\t30.01\t3 heures ½ EXCEL 2007 level 1: ECDL\t(English)\t02-03.02\t2 days WORD 2007 - level 1 : ECDL\t(English)\t05-06.02\t2 days ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours Sharepoint Designer (Frontpage)- Level 1\t(Français)\t12-13.02...

  6. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Word - Niveau 1\tF\t21-22.01\t2 d Excel - Niveau 1\tF\t24-25.01\t2 d DreamWeaver\tF\t28-29.01\t2 d Sharepoint Designer (Frontpage) Niveau 1\tF\t31-01.01-02\t2 d Sharepoint Collaboration Workspace\tF\t04.02\t1 d Office 2007 - Nouveautés\tB\t05.02\t1 d Outlook 2007 (Short course I) – Email\tB\t07.02\t0.5 d Outlook 2007 (Short course II) - Calendar, Tasks, Notes\tB\t07.02\t0.5 d Outlook 2007 (Short course III) Meeting and Delegation\tB\t08.02\t0.5 d Word 2007 (Short course IV) – Master document\tB\t08.02\t0.5 d Sharepoint Collaboration Workspace\tE\t25.02\t1 d Word – Level 1\tE\t25-26.02\t2 d Excel – Level 1\tE\t28-29.02\t2 d SOFTWARE AND SYSTEM TECHNOLOGIES JCOP - Joint PVSS-JCOP Framework\tE\t28.01-01.02\t4.5 d Introduction to Object ...

  7. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 – Novelties\t(Français)\t15.12\t1 jour Office 2007 – Novelties\t(English)\t08.01\t1 day Novelties of EXCEL 2007\t(English)\t09.01\t1 day WORD 2007 - level 2 : ECDL\t(Français)\t12-13.01\t2 jours EXCEL 2007 - Level 2: ECDL\t(English)\t15-16.01\t2 days Novelties Office 2007: WORD 2007\t(Français)\t19.01\t1 jour Sharepoint Collaboration Workspace\t(Français)\t29-30.01\t1 jour ½ Windows Vista\t(Français)\t30.01\t3 heures ½ EXCEL 2007 level 1: ECDL\t(English)\t02-03.02\t2 days WORD 2007 - level 1 : ECDL\t(English)\t05-06.02\t2 days ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours Sharepoint Designer (Frontpage)- Level 1\t(Français)\t12-13.02\t2 jours Indico - Meeting Organization\t(Français)\t02.03\t2 heures Indico - Conference Organization\t...

  8. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE DreamWeaver\tF\t28-29.01\t2 d Sharepoint Designer (Frontpage) Niveau 1\tF\t31-01.01-02\t2 d Sharepoint Collaboration Workspace\tF\t04.02\t1 d Office 2007 – Nouveautés/Novelties\tB\t05.02\t1 d Outlook 2007 (Short course I) – Email\tB\t07.02\t0.5 d Outlook 2007 (Short course II) - Calendar, Tasks, Notes\tB\t07.02\t0.5 d Outlook 2007 (Short course III) Meeting and Delegation\tB\t08.02\t0.5 d Word 2007 (Short course IV) – Master document\tB\t08.02\t0.5 d Sharepoint Collaboration Workspace\tE\t25.02\t1 d Word – Level 1\tE\t25-26.02\t2 d Excel – Level 1\tE\t28-29.02\t2 d SOFTWARE AND SYSTEM TECHNOLOGIES JCOP - Joint PVSS-JCOP Framework\tE\t28.01-01.02\t4.5 d Introduction to Object Oriented programming and UML\tE\t5-7.02\t3 d ROXIE Use...

  9. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE ACCESS 2007 - level 1 : ECDL\tE\t13-14.02\t2 d Sharepoint Collaboration Workspace\tE\t25.02\t1 d Office 2007 –Novelties\tE\t03.03\t1 d Sharepoint designer (Frontpage) – Level 1\tE\t05-06.03\t2 d Word 2007 (Short course I: HowTo. work with AutoTasks)\tB\t31.03\t0.5 d Word 2007 (Short course II: HowTo mail merge)\tB\t31.03\t0.5 d SOFTWARE AND SYSTEM TECHNOLOGIES ROXIE User’s Course - Beginners Level\tE\t11-13.02\t3 d Electromagnetic Compatibility/Compatibilité Electromagnetique (EMC): Applications B\t13.02\t0.5 d Java 2 Enterprise Edition – Part 1: Web Applications\tE\t03-04.03\t2 d Perl 5 – Introduction\tE\t05.03\t1 d JCOP – Joint PVSS\tE\t10-14.03\t4 d Python – Hands-on Introduction\tE\t26-28.03\t3 d ELECTRONIC DESIGN Electrostatique Discharge Protecti...

  10. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 2: Object-Oriented and Generic Programming\t25-MAY-10\t28-MAY-10\tEnglish\t3 days CERN openlab Multi-threading and Parallelism Workshop\t04-MAY-10\t05-MAY-10\tEnglish\t2 days ITIL Foundations (version 3)\t31-MAY-10\t02-JUN-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t22-JUN-10\t22-JUN-10\tEnglish\t1 hour JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t21-JUN-10\t23-JUN-10\tEnglish\t3 days JavaScript for web development\t05-MAY-10\t07-MAY-10\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t22-JUN-10\t24-JUN-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t31-MAY-10\t04-JUN-10\tEnglish\t4.5 days Le Langage C (ANSI et C99)\t24-JUN-10\t02-JUL-10\tEnglish\t4 days Object-oriented Design Patterns\t10-MAY-10\t12-MAY-10\tEnglish\t3 days Orac...

  11. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 2: Object-Oriented and Generic Programming\t25-MAY-10\t28-MAY-10\tEnglish\t3 days CERN openlab Multi-threading and Parallelism Workshop\t04-MAY-10\t05-MAY-10\tEnglish\t2 days ITIL Foundations (version 3) EXAMINATION\t29-APR-10\t29-APR-10\tEnglish\t1 hour JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t21-JUN-10\t23-JUN-10\tEnglish\t3 days JavaScript for web development\t05-MAY-10\t07-MAY-10\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t27-APR-10\t29-APR-10\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t22-JUN-10\t24-JUN-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t19-APR-10\t23-APR-10\tEnglish\t4.5 days JCOP - Joint PVSS-JCOP Framework\t31-MAY-10\t04-JUN-10\tEnglish\t4.5 days Le Langage C (ANSI et C99)\t24-JUN-10\t02-J...

  12. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 – Novelties\t(Français)\t28.04\t1 jour Outlook 2007 (Short Course I) – Email\t(Bilingue)\t29.04\t0.5 day Outlook 2007 (Short Course II) – Calendar, Tasks and Notes\t(Bilingue)\t29.04\t0.5 day Excel 2007 – Niveau 2 ECDL (Français)\t05-06.05\t2 jours Novelties of Excel\t(Français)\t09.05\t1 jour In Design: Introduction (Français)\t13-14.05\t2 jours Sharepoint Collaboration Worskpace\t(English)\t19-20.05\t2 days Windows Vista\t(Français)\t20.05\t0.5 jour Word 2007 – Level 2 : ECDL\t(English)\t02-03.06\t2 days Excel 2007 – Niveau 2 ECDL\t(English)\t05-06.06\t2 days Outlook 2007 (Short Course III) – Meetings and Delegation\t(Bilingue)\t09.06\t0.5 day Word 2007 (Short Course III) – HowTo….Work with long documents\t(Bilingue)\t09.06\t0.5 day...

  13. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Excel 2007 – Niveau 2 ECDL (Français)\t05-06.05\t2 jours Novelties of Excel\t(Français)\t09.05\t1 jour In Design: Introduction (Français)\t13-14.05\t2 jours Windows Vista\t(Français)\t20.05\t0.5 jour Sharepoint Designer (Frontpage) – Level 1\t(English)\t29-30.05\t2 days Word 2007 – Level 2 : ECDL\t(English)\t02-03.06\t2 days Excel 2007 – Niveau 2 ECDL\t(English)\t05-06.06\t2 days Outlook 2007 (Short Course III) – Meetings and Delegation\t(Bilingual)\t09.06\t0.5 day Word 2007 (Short Course III) – HowTo….Work with long documents\t(Bilingual)\t09.06\t0.5 day Sharepoint Designer (Frontpage) – Level 1 ECDL\t(English)\t29-30.05\t2 days PowerPoint 2007 – Level 1: ECDL\t(Français)\t19-20.06\t2 jours SOFTWARE AND SYSTEM TECHNOLOGIES XML Introduction...

  14. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Secure e-mail and Web browsing\t(English)\t22.04\t1.5 hour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(English)\t27-28.04\t1 jour ½ Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t30.04\t0.5 jour/day Excel 2007 (Short Course IV) – HowTo…Link cells, worksheets and workbook\t(Bilingual)\t30.04\t0.5 jour/day...

  15. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE In Design: Introduction (Français)\t13-14.05\t2 jours Windows Vista\t(Français)\t20.05\t0.5 jour ACCESS 2007 – Level 1 : ECDL\t(Français)\t27-28.05\t2 jours Sharepoint Designer (Frontpage) – Level 1\t(English)\t29-30.05\t2 days Word 2007 – Level 2 : ECDL\t(English)\t02-03.06\t2 days Indico – Meting Organization\t(Français)\t03.06\t2 heures Indico – Conference Organization\t(Français)\t03.06\t3 heures Excel 2007 – Niveau 2 ECDL\t(English)\t05-06.06\t2 days Outlook 2007 (Short Course III) – Meetings and Delegation\t(Bilingual)\t09.06\t0.5 day Word 2007 (Short Course III) – HowTo….Work with long documents\t(Bilingual)\t09.06\t0.5 day Excel 2007 – Level 1 : ECDL\t(Français)\t10-11.06\t2 jours Sharepoint Designer (Frontpage) – Level 2\t(Englis...

  16. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE WORD 2007 - level 2 : ECDL\t(Français)\t12-13.01\t2 jours EXCEL 2007 - Level 2: ECDL\t(English)\t15-16.01\t2 days Novelties Office 2007: WORD 2007\t(Français)\t19.01\t1 jour Sharepoint Collaboration Workspace\t(Français)\t29-30.01\t1 jour ½ Windows Vista\t(Français)\t30.01\t3 heures ½ EXCEL 2007 level 1: ECDL\t(English)\t02-03.02\t2 days WORD 2007 - level 1 : ECDL\t(English)\t05-06.02\t2 days ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours Sharepoint Designer (Frontpage)- Level 1\t(Français)\t12-13.02\t2 jours Indico - Meeting Organization\t(Français)\t02.03\t2 heures Indico - Conference Organization\t(Français)\t02.03\t3 heures EXCEL 2007 - level 1 : ECDL\t(Français)\t03-04.03\t2 jours Sharepoint Designer (Frontpage) - Level 2\t(English)\t19-20.03\t...

  17. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    HR Department

    2009-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 – Novelties (Français)\t20.04\t1 jour Novelties Office 2007: Powerpoint 2007\t(Français)\t21.04\t1 jour Secure e-mail and Web browsing\t(English)\t22.04\t1.5 hour Introduction to Dreamweaver MX\t(Français)\t23-24.04\t2 jours Sharepoint Collaboration Workspace\t(English)\t27-28.04\t1 jour ½ Excel 2007 (Short Course I) –HowTo…Work with formulae (Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course II) – HowTo…Format your worksheet for printing\t(Bilingual)\t29.04\t0.5 jour/day Excel 2007 (Short Course III) – HowTo…Pivot Tables\t(Bilingual)\t30.04\t0.5 jour/day Excel 2007 (Short Course IV) – HowTo…Link cells, worksheets and workbook\t(Bilingual)\t30.04\t0.5 jour/day Word 2007 – Level 2 : ECDL\t(English)\t04-05.05\t2 days Exc...

  18. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Business Objects Basic\t18-Oct-10\t19-Oct-10\ttbc\t2 days Business Objects advanced\t20-Oct-10\t20-Oct-10\ttbc\t1 day C++ Part 1 - Hands-On Introduction\t20-Sep-10\t23-Sep-10\tEnglish\t4 days CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t22-Sep-10\t23-Sep-10\tEnglish\t2 days Developing secure software\t6-Sep-10\t6-Sep-10\tEnglish\t3,5 hours ISTQB International Software Testing Qualifications Board\t13-Sep-10\t16-Sep-10\tEnglish\t4 days ITIL Foundations (version 3)\t4-Oct-10\t6-Oct-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t28-Oct-10\t28-Oct-10\tEnglish\t1 hour JCOP - Joint PVSS-JCOP Framework\t30-AUG-10\t3-Sep-10\tEnglish\t4,5 days JCOP - Joint PVSS-JCOP Framework\t11-Oct-10\t15-Oct-10\tEnglish\t4,5 days Oracle Database SQL Tuning\t25-Oct-10\t27-Oc...

  19. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2011-01-01

    The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies CERN openlab Multi-threading and Parallelism Workshop\t9-May-11\t10-May-11\t2 days\tEnglish Dealing efficiently with Oracle Performance Issues\t26-May-11\t26-May-11\t1 day\tEnglish Developing secure software\t2-May-11\t2-May-11\t3.5 hours\tEnglish Emacs - way beyond Text Editing\t30-Jun-11\t30-Jun-11\t1 day\tEnglish ITIL Foundations (version 3)\t9-May-11\t11-May-11\t3 days\tEnglish ITIL Foundations (version 3) EXAMINATION\t23-May-11\t23-May-11\t1 hour\tEnglish JAVA - Level 1\t13-Apr-11\t15-Apr-11\t3 days\tEnglish JavaScript for web development\t22-Jun-11\t24-Jun-11\t3 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t24-May-11\t26-May-11\t3 days\tEnglish JCOP - Joint PVSS-JCOP Framework\t9-May-11\t13-May-11\t4.5 days\tEnglish JCOP - Joint PVSS-JCOP Framework\t20-Jun-11\t24-Jun-...

  20. CERN Technical training: available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 2: Object-Oriented and Generic Programming\t25-MAY-10\t28-MAY-10\t3 days\tEnglish Le Langage C (ANSI et C99)\t12-APR-10\t15-APR-10 English ITIL Foundations (version 3)\t12-APR-10\t14-APR-10\t3 days\tEnglish ITIL Foundations (version 3) EXAMINATION\t25-Mar-10\t25-Mar-10\t1 hour\tEnglish ITIL Foundations (version 3) EXAMINATION\t29-APR-10\t29-APR-10\t1 hour\tEnglish JAVA - Level 1\t22-Mar-10\t24-Mar-10\t3 days\tEnglish JCOP - Joint PVSS-JCOP Framework\t19-APR-10\t23-APR-10\t4.5 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t27-APR-10\t29-APR-10\t3 days\tEnglish CERN openlab Multi-threading and Parallelism Workshop\t04-MAY-10\t05-MAY-10\t2 days\tEnglish Oracle - SQL\t22-Mar-10\t24-Mar-10\t3 days\tEnglish Oracle - Programming with PL/SQL\t06-APR-10\t08-APR-10\t3 days\tE...

  1. CERN Technical Training: available Places in forthcoming Courses

    CERN Document Server

    2008-01-01

    The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE PowerPoint 2007 – Niveau 1: ECDL\t(Français)\t19-20.06\t2 jours Videoconferencing and collaborative tools\t(English)\t27.06\t2 hours A hands-on overview of EVO\t(English)\t27.06\t½ day Excel 2007 – Level 2 ECDL\t(English)\t30.06-01.07\t2 days Access 2007 – Niveau 2: ECDL\t(Français)\t01-04.07\t4 ½ journées Hands-On Design Patterns for Object-oriented Programming (English)\t02-04.07\t3 days Windows Vista Advanced\t(Français)\t10.07\t½ jour Windows Vista\t(Français)\t11.07\t½ jour SOFTWARE AND SYSTEM TECHNOLOGIES Python-Hands-on Introduction\t(English)\t16-18.06\t3 days JCOP – Finite State Machines in the JCOP Framework\t(English)\t24-26.06\t3 days Oracle 10g Certified Professional\t(English)\t30.06-04.07\t5 days Advanced Python-Hands-on\t(English)\t0...

  2. CERN Technical Training 2005: IT3T - IT Technical Training Tutorials (Summer 2005)

    CERN Multimedia

    Davide Vitè

    2005-01-01

    CERN Technical Training and the Internet Services group of the IT department (IT/IS) are jointly organizing a series of free tutorials, addressing some topics of common interest: the IT Technical Training Tutorials (IT3T). The first IT3T will be offered in June 2005, in English, with the following schedule: IT3T/1 - Read your mail and more with Outlook 2003: June 14 (Ruben Gaspar) IT3T/2 - Creating, managing and using distribution lists with Simba2: June 16 (Ruben Leivas) IT3T/3 - Working remotely with Windows XP: June 28 (Michel Christaller) IT3T/4 - Editing Websites with FrontPage 2003: June 30 (Andreas Wagner) All IT Technical Training Tutorials will take place in the Training Centre Auditorium (building 593, room 11), from 14h30 to 15h30. The tutorials are free of charge, but separate registration to each is required. Participation to any of the tutorials is open: attendance to any tutorial is not a prerequisite to attend subsequent ones. If you are interested in attending, please discuss with your sup...

  3. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE FrontPage 2003 - niveau 2 F 22-23.10 2 d Excel 2007 Level 2 : ECDL F 25-26.10 2 d Nouveauté Word 2007 E/F 29.10 1 d Nouveauté Excel 2007 E/F 30.10 0.5 d Excel 2007 (Short Course III) - How to pivot tables F/E 09.11 0.5 d Introduction to Sharepoint E 15.11 1 d Nouveauté Powerpoint 2007 E/F 16.11 1 d Excel 2007 (Short Course IV) - How to link cells, worksheets and workbooks F/E 16.11 0.5 d FrontPage 2003 - Level 1 E 29-30.11 2 d Excel 2007 - niveau 1 : ECDL F 10-11.12 2...

  4. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE Excel 2007 Niveau 2 : ECDL F 11-12.10 2 d Excel 2007 (Short Course II) - How to format your worksheet for printing E/F 12.10 0.5 d FrontPage 2003 - niveau 2 F 22-23.10 2 d Excel 2007 Level 2 : ECDL F 25-26.10 2 d Nouveauté Word 2007 E/F 29.10 1 d Nouveauté Excel 2007 E/F 30.10 0.5 d Excel 2007 (Short Course III) - How to pivot tables F/E 09.11 0.5 d Introduction to Sharepoint E 15.11 1 d Nouveauté Powerpoint 2007 E/F 16.11 1 d Excel 2007 (Short Course IV) - How to link cells, work...

  5. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE FrontPage 2003 - niveau 2 F 22-23.10 2 d Excel 2007 Level 2: ECDL F 25-26.10 2 d Nouveauté Word 2007 E/F 29.10 1 d Nouveauté Excel 2007 E/F 30.10 0.5 d ACCESS 2007 - Level 2: ECDL E 1.-2.11 2 d Excel 2007 (Short Course III) - How to pivot tables F/E 09.11 0.5 d Introduction to Sharepoint E 15.11 1 d Nouveauté Powerpoint 2007 E/F 16.11 1 d Excel 2007 (Short Course IV) - How to link cells, worksheets and workbooks F/E 16.11 0.5 d FrontPage 2003 - Level 1 E 29-30.11 2 d ...

  6. CERN Technical Training: Places available for forthcoming courses

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE Outlook 2007 (Short Course II) - Calendar, Tasks and Notes E/F 28.9 0.5 d Outlook 2007 (Short Course III) - Meeting and Delegation E/F 28.9 0.5 d Excel 2007 Niveau 2 : ECDL F 11-12.10 2 d Excel 2007 (Short Course II) - How to format your worksheet for printing E/F 12.10 0.5 d Excel 2007 (Short Course I) - How to work with Formulae E/F 21.9 1/2 d Nouveauté Word 2007 E/F 22.10 1 d Nouveauté Excel 2007 E/F 23.10 1/2 d Excel 2007 Level 2 : ECDL F 25-26.10 2 d Introduction to Sharepoint E 29.10 1 d ...

  7. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2007-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2007 and still have places available. You may find the full, updated Technical Training course program on our web-catalogue web-catalogue. OFFICE SOFTWARE Excel 2007 (Short Course III) - How to pivot tables F/E 09.11 0.5 d Introduction to Sharepoint E 15.11 1 d Excel 2007 (Short Course IV) - How to link cells, worksheets and workbooks E/F 16.11 0.5 d Project Planning with MS-Project E 21/11 + 28/11 2 d Excel 2007 Level 2 : ECDL E 26-27.11 2 d FrontPage 2003 - Level 1 E 29-30.11 2 d Excel 2007 - niveau 1 : ECDL F 10-11.12 2 d Word 2007 - niveau 2 : ECDL F 13-14.12 2 d SOFTWARE AND SYSTEM TECHNOLOGIES C++ for Particle Physicists E 05-09.11 3 d ...

  8. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 2: Object-Oriented and Generic Programming\t22-Nov-10\t25-Nov-10\tEnglish\t4 days Emacs - way beyond Text Editing\t09-DEC-10\t09-DEC-10\tEnglish\t3 days ITIL Foundations (version 3)\t22-Nov-10\t24-Nov-10\tEnglish\t1 day ITIL Foundations (version 3) EXAMINATION\t13-DEC-10\t13-DEC-10\tEnglish\t1 hour JAVA - Level 1\t25-Nov-10\t29-Nov-10\tEnglish\t3 days JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t13-DEC-10\t15-DEC-10\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t17-Nov-10\t19-Nov-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t29-Nov-10\t03-DEC-10\tEnglish\t4.5 days Object-oriented Design Patterns\t06-DEC-10\t08-DEC-10\tEnglish\t3 days Optimising Oracle - Foundations\t25-Nov-10\t26-Nov-10\tEnglish\t2 days Oracle - Programming with PL/SQL\t06-DE...

  9. CERN Technical Training: available places in forthcoming courses

    CERN Multimedia

    HR Department

    The following course sessions are scheduled in the framework of the 2009 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Developing secure software 07-DEC-09 07-DEC-09 0.5 day English JCOP - Joint PVSS-JCOP Framework 23-Nov-09 27-Nov-09 4.5 days English Oracle Database SQL Tuning 07-DEC-09 09-DEC-09 3 days English PERL 5 - Advanced Aspects 10-DEC-09 10-DEC-09 1 day English Project Development using Python 01-DEC-09 04-DEC-09 4 days English Python - Hands-on Introduction 08-DEC-09 10-DEC-09 3 days English Secure coding for Perl 26-Nov-09 26-Nov-09 1 day English Secure coding for PHP 25-Nov-09 25-Nov-09 1 day English Electronic design Advanced VHDL for FPGA Design 30-Nov-09 04-DEC-09 5 days English LabVIEW - Working efficiently with LabVIEW 8 07-DEC-09 07-DEC-09 1 day English LabVIEW Basic I with RADE introduction 30-Nov-09 02-DEC-09 3 days English LabVIEW Basics 2 03-D...

  10. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 2: Object-Oriented and Generic Programming\t25-MAY-10\t28-MAY-10\tEnglish\t3 days Certification: Ingénieur en Sécurité Fonctionnelle\t07-JUN-10\t10-JUN-10\tFrench\t3.5 jours Emacs - way beyond Text Editing\t16-JUL-10\t16-JUL-10\tEnglish\t1 day ITIL Foundations (version 3)\t31-MAY-10\t02-JUN-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t22-JUN-10\t22-JUN-10\tEnglish\t1 hour JAVA - Level 2\t05-JUL-10\t08-JUL-10\tEnglish\t4 days JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t21-JUN-10\t23-JUN-10\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t22-JUN-10\t24-JUN-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t31-MAY-10\t04-JUN-10\tEnglish\t4.5 days Le Langage C (ANSI et C99)\t24-JUN-10\t02-JUL-10\tEngl...

  11. CERN Technical training: available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 1 - Hands-On Introduction\t17-Mar-10\t19-Mar-10\t3 days\tEnglish Developing secure software\t22-Mar-10\t22-Mar-10\t0,5 day\tEnglish Emacs - way beyond Text Editing\t26-Mar-10\t26-Mar-10\t1 day\tEnglish Introduction to Databases and Database Design\t11-Mar-10\t12-Mar-10\t2 days\tEnglish ITIL Foundations (version 3)\t12-APR-10\t29-APR-10\t3 days\tEnglish ITIL Foundations (version 3) EXAMINATION\t25-Mar-10\t25-Mar-10\t1 hour\tEnglish JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t22-Mar-10\t24-Mar-10\t3 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t9-Mar-10\t11-Mar-10\t3 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t27-APR-10\t29-APR-10\t3 days\tEnglish JCOP - Joint PVSS-JCOP Framework\t19-APR-10\t23-APR-10\t4,5 days\tEnglish Le Langage...

  12. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 2: Object-Oriented and Generic Programming\t25-MAY-10\t28-MAY-10\tEnglish\t3 days Certification: Ingénieur en Sécurité Fonctionnelle\t07-JUN-10\t10-JUN-10\tFrench\t4 jours Emacs - way beyond Text Editing\t16-JUL-10\t16-JUL-10\tEnglish\t1 day ITIL Foundations (version 3)\t31-MAY-10\t02-JUN-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t22-JUN-10\t22-JUN-10\tEnglish\t1 hour JAVA - Level 2\t05-JUL-10\t08-JUL-10\tEnglish\t4 days JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t21-JUN-10\t23-JUN-10\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t22-JUN-10\t24-JUN-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t31-MAY-10\t04-JUN-10\tEnglish\t4.5 days Le Langage C (ANSI et C99)\t24-JUN-10\t02-JUL-10\tEnglis...

  13. CERN Technical training: available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 1 - Hands-On Introduction 17-Mar-10 19-Mar-10 2 days English Developing secure software 22-Mar-10 22-Mar-10 0.5 day English Emacs - way beyond Text Editing 26-Mar-10 26-Mar-10 2 days English Introduction to Databases and Database Design 11-Mar-10 12-Mar-10 2 days English ITIL Foundations (version 3) 8-Mar-10 10-Mar-10 3 days English ITIL Foundations (version 3) 12-APR-10 29-APR-10 3 days English ITIL Foundations (version 3) EXAMINATION 25-Mar-10 25-Mar-10 1 hour English JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans 22-Mar-10 24-Mar-10 3 days English JCOP - Finite State Machines in the JCOP Framework 9-Mar-10 11-Mar-10 3 days English JCOP - Finite State Machines in the JCOP Framework 27-APR-10 29-APR-10 3 days English JCOP - Joint PVS...

  14. CERN Technical training: available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 1 - Hands-On Introduction\t17-Mar-10\t19-Mar-10\t3 days\tEnglish Developing secure software\t22-Mar-10\t22-Mar-10\t0.5 day\tEnglish Emacs - way beyond Text Editing\t26-Mar-10\t26-Mar-10\t1 day English Introduction to Databases and Database Design\t11-Mar-10\t12-Mar-10\t2 days\tEnglish ITIL Foundations (version 3)\t8-Mar-10\t10-Mar-10\t3 days\tEnglish ITIL Foundations (version 3)\t12-APR-10\t29-APR-10\t3 days\tEnglish ITIL Foundations (version 3) EXAMINATION\t25-Mar-10\t25-Mar-10\t1 hour\tEnglish JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t22-Mar-10\t24-Mar-10\t3 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t9-Mar-10\t11-Mar-10\t3 days\tEnglish JCOP - Finite State Machines in the JCOP Framework\t27-APR-10\t29-APR-10\t3 days\tEnglish JCOP - Joint PVS...

  15. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 2: Object-Oriented and Generic Programming\t25-MAY-10\t28-MAY-10\tEnglish\t3 days ITIL Foundations (version 3)\t31-MAY-10\t02-JUN-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t22-JUN-10\t22-JUN-10\tEnglish\t1 hour JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t21-JUN-10\t23-JUN-10\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t22-JUN-10\t24-JUN-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t31-MAY-10\t04-JUN-10\tEnglish\t4.5 days Le Langage C (ANSI et C99)\t24-JUN-10\t02-JUL-10\tEnglish\t4 days Object-oriented Design Patterns\t10-MAY-10\t12-MAY-10\tEnglish\t3 days Oracle - Programming with PL/SQL\t28-JUN-10\t30-JUN-10\tEnglish\t3 days Oracle Certified Professional\t07-JUN-10\t11-JUN-10\tEnglish\t5 days Project Development using ...

  16. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2011-01-01

    The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t16-Mar-11\t18-Mar-11\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t05-APR-11\t07-APR-11\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t14-Mar-11\t18-Mar-11\tEnglish\t4,5 days Linux LPI 101 - Introduction à Linux et LPI 102 Administration systèmes sur Linux\t8-Mar-11\t11-Mar-11\tEnglish\t4 days Oracle - SQL\t16-Mar-11\t18-Mar-11\tEnglish\t3 days Oracle Databases: Advanced PL/SQL Programming\t21-Mar-11\t23-Mar-11\tEnglish\t3 days Electronic design Electromagnetic Compatibility (EMC) : Introduction\t06-APR-11\t06-APR-11\tBilingual\t0,5 days Advanced VHDL for FPGA Design\t04-APR-11\t08-APR-11\tEnglish\t5 days AutoCAD 2011 - level 1\t28-Mar-11\t05-APR-11\tFrench\t4 jours LabVIEW for beg...

  17. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Certification: Ingénieur en Sécurité Fonctionnelle\t07-JUN-10\t10-JUN-10\tFrench\t3.5 jours Emacs - way beyond Text Editing\t16-JUL-10\t16-JUL-10\tEnglish\t1 day ITIL Foundations (version 3)\t31-MAY-10\t02-JUN-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t22-JUN-10\t22-JUN-10\tEnglish\t1 hour JAVA - Level 2\t05-JUL-10\t08-JUL-10\tEnglish\t4 days JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t21-JUN-10\t23-JUN-10\tEnglish\t3 days JCOP - Finite State Machines in the JCOP Framework\t22-JUN-10\t24-JUN-10\tEnglish\t3 days Le Langage C (ANSI et C99)\t24-JUN-10\t02-JUL-10\tEnglish\t4 days Oracle - Programming with PL/SQL\t28-JUN-10\t30-JUN-10\tEnglish\t3 days Oracle Certified Professional\t07-JUN-10\t11-JUN-10\tEnglish\t5 days Project Devel...

  18. CERN Technical Training 2006: Software and System Technologies Curriculum - Scheduled

    CERN Multimedia

    2006-01-01

    Course Sessions (October 2006-March 2007) The Software and System Technologies Curriculum of the CERN Technical Training Programme offers comprehensive training in C++, Java, Perl, Python, XML, OO programming, JCOP/PVSS, database design and Oracle. In the PERL, C++, OO and Java course series there are some places available on the following course sessions, currently scheduled until March 2007: Object-Oriented Analysis and Design using UML: 17-19 October 2006 (3 days) JAVA 2 Enterprise Edition - Part 1: Web Applications: 19-20 October 2006 (2 days) JAVA - Level 1: 30 October -1 November 2006 (3 days) PERL 5 - Advanced Aspects: 2 November 2006 (1 day) C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming: 14-16 November 2006 (3 days) JAVA - Level 2: 4-7 December 2006 (4 days) C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls: 12-15 December 2006 (4 days) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 18-20 December 2006 (3 days) C++ for Particle Physicists:...

  19. CERN Technical Training: available Places in forthcoming Courses

    CERN Multimedia

    2008-01-01

    The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue. OFFICE SOFTWARE Sharepoint Collaboration Workspace\tF\t04.02\t1 d Office 2007 – Nouveautés/Novelties\tB\t05.02\t1 d Outlook 2007 (Short course I) – Email\tB\t07.02\t0.5 d Outlook 2007 (Short course II) - Calendar, Tasks, Notes\tB\t07.02\t0.5 d Outlook 2007 (Short course III) Meeting and Delegation\tB\t08.02\t0.5 d Word 2007 (Short course IV) – Master document\tB\t08.02\t0.5 d ACCESS 2007 - level 1 : ECDL\tE\t13-14.02\t2 d Sharepoint Collaboration Workspace\tE\t25.02\t1 d Word – Level 1\tE\t25-26.02\t2 d Excel – Level 1\tE\t28-29.02\t2 d Office 2007 –Novelties\tE\t03.03\t1 d Sharepoint designer (Frontpage) – Level 1\tE\t05-06.03\t2 d Word 2007 (Short course I: HowTo. work with AutoTasks)\tB\t31.03\t0.5 d Word 2007 (Short course II: HowTo mail merge)\tB\t31.03\t0.5 d SOFTWARE AND SYS...

  20. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Emacs - way beyond Text Editing\t09-DEC-10\t09-DEC-10\tEnglish\t3 days ITIL Foundations (version 3) EXAMINATION\t13-DEC-10\t13-DEC-10\tEnglish\t1 hour JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans\t13-DEC-10\t15-DEC-10\tEnglish\t3 days JCOP - Joint PVSS-JCOP Framework\t29-Nov-10\t03-DEC-10\tEnglish\t4.5 days Object-oriented Design Patterns\t06-DEC-10\t08-DEC-10\tEnglish\t3 days Oracle - Programming with PL/SQL\t06-DEC-10\t08-DEC-10\tEnglish\t3 days Oracle - SQL\t01-DEC-10\t03-DEC-10\tEnglish\t3 days PERL 5 - Advanced Aspects\t30-Nov-10\t30-Nov-10\tEnglish\t1 day XML - Introduction\t01-DEC-10\t02-DEC-10\tEnglish\t2 days Electronic design Cours de base Automation du bâtiment\t15-DEC-10\t17-DEC-10\tFrench\t3 jours LabVIEW Core I with RADE introduction\t29-Nov-10\t01-DEC-10\tBi...

  1. CERN Technical training: Available places in forthcoming courses

    CERN Multimedia

    HR Department

    2010-01-01

    The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies Emacs - way beyond Text Editing\t16-JUL-10\t16-JUL-10\tEnglish\t1 day JAVA - Level 2\t05-JUL-10\t08-JUL-10\tEnglish\t4 days JCOP - Finite State Machines in the JCOP Framework\t22-JUN-10\t24-JUN-10\tEnglish\t3 days Le Langage C (ANSI et C99)\t24-JUN-10\t02-JUL-10\tEnglish\t4 days Oracle - Programming with PL/SQL\t28-JUN-10\t30-JUN-10\tEnglish\t3 days Project Development using Python\t29-JUN-10\t02-JUL-10\tEnglish\t4 days Electronic design CAO = Allegro Design Entry HDL Front-to-Back Flow v16.3\t28-JUN-10\t30-JUN-10\tFrench\t3 jours LabVIEW Communication with RADE applications\t01-JUL-10\t02-JUL-10\tEnglish\t2 days Managing Software Engineering in LabVIEW\t08-JUL-10\t09-JUL-10\tEnglish\t2 days LabVIEW Data Acquisition and Signal Conditioning Course\t05-JUL-10\t07-JUL-10\tFrench\t3 jours Siemen...

  2. Technical Training: CERN Technical Training 2004 - New Short Courses (SC) on Microsoft Outlook

    CERN Multimedia

    Monique Duval

    2004-01-01

    The CERN Technical Training programme is now proposing a new format for courses on Microsoft Outlook. Three two-hours Short Courses (SC) will cover basic and advanced functionalities of the recommended mail client for email at CERN. Each module can be followed independently. The next scheduled sessions will take place as follows: Outlook (SC I): E-mail. Next session: 31.8.2004 (9h00-11h00) Outlook (SC II): Calendar, Tasks and Notes. Next session: 31.8.2004 (14h00-16h00) Outlook (SC III): Meetings and Delegation. Next session: 7.9.2004 (14h00-16h00) In particular, SC I will cover how to open, create and send email, work with attachments, use stationery, organise mail, and work with the address book, SC II will show how to work with the calendar, tasks and notes, and SC III will cover how to organise and manage meetings, work with meeting requests, share tasks, and use email and calendar delegation. The number of participants to each session is limited to 8. The instructor is English-French bilingual, and s...

  3. CERN Technical Training: Open Courses (April - June 2007)

    CERN Multimedia

    HR Department

    2007-01-01

    The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: AutoCAD 2006 - niveau 1 (course in French): 25.4.- 26.4.2007 & 2.5. - 3.5.2007 (4 days in 2 modules, 5 places available) AutoCAD 2006 - niveau 1 (course in French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, 4 places available) AutoCAD Mechanical 2006 (course in French) 21.6.-22.6.2007 (2 days, 8 places available) Automate de securite S7 (course in French) 14.5.-16.5.2007 (3 days, 4 places available) * NEW COURSE* Automate de securite S7 (course in French): 9.5.-11.5.2007 (3 days, 4 places available) * NEW COURSE* JCOP - Joint PVSS-JCOP Frameswork (course in English): 21.5.-25.5.2007 (5 days, 12 places available) JCOP - Finite State Machines in the JCOP Frameswork (course in English): 12.6.-14.6.2007 (3 days, 12 places available) LabVIEW Base 1 (in French): 2.-4.5.2007 (3 days, few places available) LabVIEW Intermediate 1 (previously: Application Development)...

  4. CERN Technical Training: Open Courses (April - June 2007)

    CERN Multimedia

    HR Department

    2007-01-01

    The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: AutoCAD 2006 - niveau 1 (French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, full) AutoCAD Mechanical 2006 (French) 21.6.-22.6.2007 (2 days, 3 places available) Automate de sécurité S7 (French) 14.5.-16.5.2007 (3 days, full) * NEW COURSE* FrontPage 2003, niveau 1 (French): 7.6.-8.6.2007 (2 days, 6 places available) LabVIEW Basics 1 (English): 11.-13.6.2007 (3 days, 4 places available) LabVIEW Basics 2 (English/French): 14.-15.6.2007 (2 days, 5 places available) Java - Level 1 (English): 25.6.-27.6.2007 (3 days, 8 places available) Java - Level 2 (English): 2.7.-5.7.2007 (4 days, 4 places available) JCOP - Joint PVSS-JCOP Framework (English): 21.5.-25.5.2007 (5 days, full) JCOP - Finite State Machines in the JCOP Framework (English): 12.6.-14.6.2007 (3 days, 5 places available) Project Planning with MS-Project (English): 19.6....

  5. CERN Technical Training: Open Courses (June - July 2007)

    CERN Multimedia

    2007-01-01

    The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: Project Planning with MS-Project (English): 19.6., 26.6.(am), 3.7.(am) (2 days, 3 modules, 4 places available) Python – Hands-on-Introduction (English): 19.6.-21.6.2007 (3 days, full) AutoCAD Mechanical 2006 (French) 21.6.-22.6.2007 (2 days, full) Simplorer (English): 21.6.-22.6.2007 (2 days, 2 places available) Impacts de la suppression du plomb (RoHS) en electronique (French): 21.6.2007 (1/2 day, places available) Java – Level 1 (English): 27.6.-29.6.2007 (3 days, 4 places available) AutoCAD 2006 - niveau 1 (French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, full) LabVIEW – Working efficiently with LabVIEW 8 (English): 29.6.2007 (1 day, 5 places available) Java – Level 2 (English): 2.7.-5.7.2007 (4 days, 2 places available) MATLAB – Fundamentals and Programming Techniques (English): 2.7.-3.7.2007 (2 days, full) MATLAB...

  6. CERN Technical Training: Open Courses (April - June 2007)

    CERN Multimedia

    HR Department

    2007-01-01

    The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: FrontPage 2003, niveau 1 (French): 7.6.-8.6.2007 (2 days, 5 places available) LabVIEW Basics 1 (English): 11.6.-13.6.2007 (3 days, 1 place available) JCOP - Finite State Machines in the JCOP Framework (English): 12.6.-14.6.2007 (3 days, 3 places available) LabVIEW Basics 2 (English): 14.6.-15.6.2007 (2 days, 3 places available) Project Planning with MS-Project (English): 19.6., 26.6.(am), 3.7.(am) (2 days, 3 modules, 6 places available) C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming (English) 19.6.-21.6.2007 (3 days, places available) Python - Hands-on-Introduction (English): 19.6.-21.6.2007 (3 days, FULL) AutoCAD Mechanical 2006 (French) 21.6.-22.6.2007 (2 days, 1 place available) Simplorer (English): 21.6.-22.6.2007 (2 days, 4 places available) Java - Level 1 (English): 25.6.-27.6.2007 (3 days, 5 places available) AutoCAD 2006 - ...

  7. CERN Technical Training: Open Courses (June-July 2007)

    CERN Multimedia

    HR Department

    2007-01-01

    The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: FrontPage 2003, niveau 1 (French): 7.6.-8.6.2007 (2 days, 5 places available) LabVIEW Basics 1 (English): 11.6.-13.6.2007 (3 days, 1 place available) JCOP - Finite State Machines in the JCOP Framework (English): 12.6.-14.6.2007 (3 days, 2 places available) LabVIEW Basics 2 (English): 14.6.-15.6.2007 (2 days, 2 places available) Project Planning with MS-Project (English): 19.6., 26.6.(am), 3.7.(am) (2 days, 3 modules, 5 places available) C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming (English) 19.6.-21.6.2007 (3 days, places available) Python - Hands-on-Introduction (English): 19.6.-21.6.2007 (3 days, full) AutoCAD Mechanical 2006 (French) 21.6.-22.6.2007 (2 days, full) Simplorer (English): 21.6.-22.6.2007 (2 days, 3 places available) Java - Level 1 (English): 25.6.-27.6.2007 (3 days, 5 places available) AutoCAD 2006 - niveau 1 (French): 27.6.- 28.6...

  8. CERN Technical Training: Open Courses (June - July 2007)

    CERN Multimedia

    2007-01-01

    The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: LabVIEW Basics 1 (English): 11.6.-13.6.2007 (3 days, 1 place available) JCOP – Finite State Machines in the JCOP Framework (English): 12.6.-14.6.2007 (3 days, 2 places available) LabVIEW Basics 2 (English): 14.6.-15.6.2007 (2 days, 2 places available) Project Planning with MS-Project (English): 19.6., 26.6.(am), 3.7.(am) (2 days, 3 modules, 4 places available) C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming (English) 19.6.-21.6.2007 (3 days, 9 places available) Python – Hands-on-Introduction (English): 19.6.-21.6.2007 (3 days, full) AutoCAD Mechanical 2006 (French) 21.6.-22.6.2007 (2 days, full) Simplorer (English): 21.6.-22.6.2007 (2 days, 3 places available) Java – Level 1 (English): 27.6.-29.6.2007 (3 days, 5 places available) AutoCAD 2006 - niveau 1 (French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, full) LabVIEW – ...

  9. CERN Technical Training: Open Courses (June - July 2007)

    CERN Multimedia

    2007-01-01

    The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: Java – Level 1 (English): 27.6.-29.6.2007 (3 days, 2 places available) AutoCAD 2006 - niveau 1 (French): 27.6. - 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, full) LabVIEW – Working efficiently with LabVIEW 8 (English): 29.6.2007 (1 day, 6 places available) Java – Level 2 (English): 2.7.-5.7.2007 (4 days, 3 places available) MATLAB – Fundamentals and Programming Techniques (English): 2.7.-3.7.2007 (2 days, full) MATLAB – Simulink for System and Algorithm Modeling (English) 4.7.-5.7.2007 (2 days, 2 places available) Automate de Sécurité (French): -> POSTPONED > from 9 to 11 October 2007 ! 10.7.-12.7.2007 (3 days, full) Oracle – HTML DB 2.0: Develop Web Applications (English): 11.7.-13.7.2007 (3 days, 7 places available) Technique du vide (French): 11.7.-12.7.2007 (2 days, full) ANSYS – Classical (French) 16.7.-20.7.2007 (5 days, 4 pl...

  10. CERN Technical Training: Open Courses (June - July 2007)

    CERN Multimedia

    2007-01-01

    The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: Java – Level 2 (English): 2.7.-5.7.2007 (4 days, 3 places available) MATLAB – Fundamentals and Programming Techniques (English): 2.7.-3.7.2007 (2 days, full) MATLAB – Simulink for System and Algorithm Modeling (English) 4.7.-5.7.2007 (2 days, 2 places available) Automate de Sécurité (French): -> POSTPONED > from 9.10 – 11.10.2007 ! 10.7.-12.7.2007 (3 days, full) Oracle – HTML DB 2.0: Develop Web Applications (English): 11.7.-13.7.2007 (3 days, 6 places available) Technique du vide (French): 11.7.-12.7.2007 (2 days, full) ANSYS – Classical (French) 16.7.-20.7.2007 (5 days, 3 places available) Oracle – Programming with PL/SQL (English): 17.7.-19.7.2007 (3 days, full) Introduction to Databases and Database Design (English) 24.7.-25.7.2007 (2 days, 5 places available) Technique du vide (French): 24.7.-25.7.2007 (2 days, 3 places available) If ...

  11. CERN Technical Training: Open Courses (April - June 2007)

    CERN Multimedia

    HR Department

    2007-01-01

    The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: AutoCAD 2006 - niveau 1 (French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, full) AutoCAD Mechanical 2006 (French) 21.6.-22.6.2007 (2 days, 3 places available) FrontPage 2003, niveau 1 (French): 7.6.-8.6.2007 (2 days, 6 places available) LabVIEW Basics 1 (English): 11.-13.6.2007 (3 days, 4 places available) LabVIEW Basics 2 (English/French): 14.-15.6.2007 (2 days, 5 places available) Java - Level 1 (English): 25.6.-27.6.2007 (3 days, 8 places available) Java - Level 2 (English): 2.7.-5.7.2007 (4 days, 4 places available) JCOP - Joint PVSS-JCOP Framework (English): 21.5.-25.5.2007 (5 days, full) JCOP - Finite State Machines in the JCOP Framework (English): 12.6.-14.6.2007 (3 days, 5 places available) Project Planning with MS-Project (English): 19.6.-21.6.2007 (3 days, 5 places available) Simplorer (English): 21.6.-22.6.2007 (2 days, few places availab...

  12. CERN Technical Training 2008: Learning for the LHC!

    CERN Multimedia

    2008-01-01

    FLUKA Workshop 2008: 23-27 June 2008 http://www.cern.ch/Fluka2008 FLUKA is a fully integrated particle physics Monte-Carlo simulation package. It has many applications in high energy experimental physics and engineering, shielding, detector and telescope design, cosmic ray studies, dosimetry, medical physics and radio-biology. More information, as well as related publications can be found on the FLUKA official website (www.fluka.org). This year, the CERN FLUKA Team, in collaboration with INFN and SC/RP, is organizing a FLUKA beginner’s course, held at CERN for the first time. Previous one-week courses were given in Frascati (Italy), twice in Houston (Texas, US), Pavia (Italy), as well as in Legnaro (Italy). At CERN, continuous lectures are provided in the framework of locally scheduled ‘FLUKA User Meetings’ (http://www.cern.ch/info-fluka-discussion). This new dedicated one-week CERN training course will be an opportunity for new users to learn the basics about FLUKA, as well as offer the possibility to...

  13. Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The Instructor-led CERN WBTechT course for Microsoft Applications is a new type of course offered in the framework of the Technical Training Programme, combining instructor-led and computer-based multimedia training, also known as "blended learning". The next sessions will take place on the 12, 19, and 26 February (Thursday mornings), and subsequent sessions will be organised following demand. Based on the new ElementK 2004 CERN WBTechT catalogue, courses will be self-paced and self-d...

  14. CERN Technical Training 2004: Learning for the LHC!

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro Annonce de nouveau cours pour l'environnement d'automatisme Schneider. Un nouveau cours sur les environnements d'automatisme Premium et Quantum de Schneider est maintenant offert dans le cadre de l'Enseignement technique du CERN, afin de découvrir le nouvel outil de programmation Unity. Cette formation, mise en place par le GUAPI (Groupe des utilisateurs d'automates programmable industriels du CERN), sera essentiellement technique et pratique, destinée aux automaticiens concepteurs, metteurs en œu...

  15. CERN Technical Training 2002: Learning for the LHC! Electromagnetic Compatibility (EMC): Introduction

    CERN Multimedia

    Davide Vitè

    2002-01-01

    A new session of the course Electromagnetic Compatibility (EMC): Introduction will be held on May 22 (am), in the framework of the CERN Technical Training Programme. This session, bilingual English-French, is free of charge, and will be given by F. Szoncso of TIS-GS division. The course is designed for physicists, engineers and technicians facing electromagnetic interference problems, and will describe the underlying phenomena and mechanisms of electromagnetic interference and their remedies. More information and online registration by EDH are available from the Technical Training "Electronics Design" pages, under the chapter "Miscellaneous". Please contact Technical.Training@cern.ch should you need any other information.

  16. Technical training: CERN Document Server (CDS), Inspire and Library Services

    CERN Multimedia

    IT & GS Departments

    2012-01-01

    A new training course, “CERN Document Server (CDS), Inspire and Library Services”, is available since the beginning of the year. The training course is given by members of CERN’s CDS Team (IT-CIS group) and the Library Services (GIS SIS group) and is intended for all members of personnel of CERN. This course will present CDS and inspirehep.net and the content, scope and scientific information available in or with CDS, as much as the classification and organization of the documents. It is intended to give you the training needed to know how to use CDS most efficiently and in particular covers: the main characteristics and advanced features for the search of documents (scientific, multimedia, etc). the collaborative tools : baskets, alerts, comments, evaluation, etc. the submission of documents in CDS and examples of workflows. An important part of the training is composed of various exercises, designed to acquire practical ability to work with CDS in cases similar to re...

  17. CERN Technical Training 2006: ANSYS Course Sessions (August-September 2006)

    CERN Multimedia

    2006-01-01

    The following ANSYS course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2006, and in collaboration with CAD-FEM AG (CH): ANSYS Design Modeler (course in French): 29-30.8.2006 (2 days) ANSYS Workbench (course in French): 12-15.9.2006 (4 days, only 2 places available) If you are interested in attending any of the above course sessions, please discuss with your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at under "Upcoming course sessions", with the detailed course programmes. The complete training offer of ANSYS courses at CERN can be found at the same website, under the Mechanical Design curriculum. CERN Technical Training courses are open only to the members of CERN personnel (staff members and fellows; associates, students, users, project associates; apprentices: employees of CERN contractors, with some restrictions). In particular, quoted prices and programmes refer specifically to the CERN ...

  18. CERN Technical Training 2004: Learning for the LHC!

    CERN Multimedia

    Monique Duval

    2004-01-01

    Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro Annonce de nouveau cours pour l'environnement d'automatisme Schneider. Un nouveau cours sur les environnements d'automatisme Premium et Quantum de Schneider est maintenant offert dans le cadre de l'Enseignement technique du CERN, afin de découvrir le nouvel outil de programmation Unity. Cette formation, mise en place par le GUAPI (Groupe des utilisateurs d'automates programmable industriels du CERN), sera essentiellement technique et pratique, destinée aux automaticiens concepteurs, metteurs en œuvre, installateurs, intégrateurs et techniciens de bureau d'études. Ce cours est ouvert aux personnes étant déjà capables de développer une application PL7-Pro sur TSX Premium, ou ayant suivi le stage AP571. Objectifs : Maîtriser rapidement les différences fonctionnelles d'Unity-Pro par rapport à PL7-Pro; programmer en PLC...

  19. CERN Technical Training 2002: Learning for the LHC! INTRODUCTION TO PVSS: FREE SESSION ON 11.11.2002 (AFTERNOON)

    CERN Multimedia

    Davide Vitè

    2002-01-01

    A free-of-charge Introduction to PVSS session will be offered at CERN on November 11, 2002 (afternoon). This course is designed for people interested in SCADA-systems, and will provide an overview of PVSS features and possibilities. The programme will include a presentation of what can be done with the SCADA-system PVSS and of how PVSS is being used at CERN. A session of the complete Basic PVSS course would follow on 12-14 November (cost: 600.- CHF). More information, full programme and online registration by EDH are available from the CERN 2002 Technical Training pages or by contacting Technical.Training@cern.ch

  20. CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    2004-01-01

    Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/ where you can find the detailed course contents under the "Microsoft Office XP" catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participa...

  1. CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    2004-01-01

    Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the "Microsoft Office XP" catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the partici...

  2. CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    Monique Duval

    2004-01-01

    Would you need to enhance your skills in Microsoft Office applications or Outlook? A 'blended learning' course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on November 9, morning. Course sessions are self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the appropriate WBT...

  3. CERN Technical Training 2004 - Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    Monique Duval

    2004-01-01

    Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the ap...

  4. CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    Monique Duval

    2004-01-01

    Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the ...

  5. CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    Monique Duval

    2004-01-01

    Would you need to enhance your skills in Microsoft Office applications or Outlook? A new blended learning course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on September 7, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office XP suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office XP' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the app...

  6. CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    Monique Duval

    2004-01-01

    Would you need to enhance your skills in Microsoft Office applications or Outlook? A 'blended learning' course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on November 9, morning. Course sessions are self-paced and self-directed, with participants being in control of their learning, while having direct access to an instructor when in class. Topics include the Microsoft Office suite (Word, Excel, PowerPoint, Access) and Outlook, at introductory, intermediate and advanced levels. Visit the 2004 CERN WBTechT Portal, http://www.course-source.net/sites/cern/, where you can find the detailed course contents under the 'Microsoft Office' catalogue. Previous experience in web-based training is not required, as each session will start with an introduction to E-learning, and registration of the participants into the appropriate WBT...

  7. CERN Technical Training 2007: IT3T - IT Technical Training Tutorials (Autumn 2007)

    CERN Multimedia

    2008-01-01

    Videos now available The videos of the first IT3T series, which was offered in French in October 2007 (Office 2007, Sharepoint collaboration workspace, Vista, Outlook 2007), are now available via Indico at: http://indico.cern.ch/categoryDisplay.py?categId=590Enjoy!

  8. CERN Technical Training 2007: IT3T - IT Technical Training Tutorials (Autumn 2007)

    CERN Multimedia

    2008-01-01

    Videos now available The videos of the first IT3T series which was offered in French in October 2007 (office 2007, Sharepoint collaboration workspace, Vista, Outlook 2007), are now available via Indico at the address: http://indico.cern.ch/categoryDisplay.py?categId=590Enjoy!

  9. CERN Technical Training 2007: IT3T - IT Technical Training Tutorials (Autumn 2007)

    CERN Multimedia

    2008-01-01

    Videos now available The videos of the first IT3T series which was offered in French, in October 2007 (office 2007, Sharepoint collaboration workspace, Vista, Outlook 2007), are now available via Indico at the address: http://indico.cern.ch/categoryDisplay.py?categId=590Enjoy!

  10. CERN Technical Training 2006: Office Software Curriculum Scheduled Course Sessions (October-December 2006)

    CERN Multimedia

    2006-01-01

    The Office Software Curriculum of the CERN Technical Training Programme currently offers comprehensive training in Microsoft Office (Word, Excel, Powerpoint, Access, Outlook), MS Project, Frontpage, Dreamweaver, Indesign, LaTeX, and CERN EDMS. There are some places available on the following Microsoft Office 2003 course sessions, currently scheduled until December 2007: EXCEL 2003 - niveau 2 : ECDL - 16-17 October (2 days, session in French) WORD 2003 (Short Course II) - HowTo... Mail merge - 2 November (morning, bilingual session) WORD 2003 (Short Course IV) - HowTo... Work with master document - 2 November (afternoon, bilingual session) OUTLOOK 2003 (Short Course III) - Meetings and Delegation - 3 November (morning, bilingual session) EXCEL 2003 (Short Course IV) - HowTo... Link cells, worksheets and workbooks - 3 November (afternoon, bilingual session) EXCEL 2003 - Level 1: ECDL - 13-14 November (2 days, session in English) ACCESS 2003 - Level 2: ECDL - 5-6 December (2 days, session in English) The abo...

  11. CERN Technical Training 2006: ANSYS Course Sessions (August-September 2006)

    CERN Multimedia

    Davide Vitè

    2006-01-01

    If you wish to participate in one of the following courses, please tell to your supervisor and apply electronically from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training'form available from your Departmental Secretariat or from your DTO (Departmental Training Officer). Applications will be accepted in the order in which they are received. The following ANSYS course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2006, and in collaboration with CAD-FEM AG (CH): ANSYS DesignModeler (course in French): 29-30.8.2006 (2 days) ANSYS Workbench (course in French): 12-15.9.2006 (4 days, only 3 places available) If you are interested in attending any of the above course sessions, please discuss with your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at http://cta.cern.ch/cta2/f?p=300 under 'Upcoming course sessions', with th...

  12. CERN Technical Training 2002: Learning for the LHC! HEREF-2002 : HELIUM REFRIGERATION TECHNIQUES

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Theory, Technology, Maintenance and Control of Helium Refrigerators HeREF-2002 is a new course, in the framework of the 2002 Technical Training Programme, that will provide a complete introduction to Helium refrigeration, with a practical approach to theory, technology, maintenance and control of Helium refrigeration installations. Theoretical aspects and equations will be limited to a minimum. HeREF-2002 targets an audience of technicians and operators of Helium refrigeration plants at CERN, as well as physicists and engineers needing an overview of current Helium refrigeration techniques. HeREF-2002 will address, among other, issues related to component technology, installation maintenance, process control and Helium purity. A commented visit to a couple of CERN Helium refrigeration or liquefaction plants will also take place. Duration: 7 half days (5 mornings and 2 afternoons), 21-25 October, 2002. Estimated cost: 300.- CHF Language: Bilingual English-French. The course support will be in English, the ...

  13. CERN Technical Training 2002: Learning for the LHC ! HeREF-2002 : Helium Refrigeration Techniques

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Theory, Technology, Maintenance and Control of Helium Refrigerators HeREF-2002 is a new course, in the framework of the 2002 Technical Training Programme, that will provide a complete introduction to Helium refrigeration, with a practical approach to theory, technology, maintenance and control of Helium refrigeration installations. Theoretical aspects and equations will be limited to a minimum. HeREF-2002 targets an audience of technicians and operators of Helium refrigeration plants at CERN, as well as physicists and engineers needing an overview of current Helium refrigeration techniques. HeREF-2002 will address, among other, issues related to component technology, installation maintenance, process control and Helium purity. A commented visit to a couple of CERN Helium refrigeration or liquefaction plants will also take place. Duration: 7 half days (5 mornings and 2 afternoons), 21-25 October 2002. Estimated cost: 300.- CHF Language: Bilingual English-French. The course support will be in English, the...

  14. CERN Technical Training 2002: Learning for the LHC! CLEAN-2002: WORKING IN A CLEAN ROOM

    CERN Multimedia

    Davide Vitè

    2002-01-01

    CLEAN-2002 is a new, free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed. If you are interested in CLEAN-2002, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training pages. The next session, in English, will be on 10 October (afternoon). Other sessions, in French and English, will be offered following demand: the first session in French will be organised in November. Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

  15. CERN Technical Training 2003: Learning for the LHC! : AXEL-2003  -  Introduction to Particle Accelerators

    CERN Document Server

    2003-01-01

    AXEL-2003 is a course given at CERN within the framework of the Technical Training Programme. The course will present an introduction to particle accelerators. Known in the past as the PS Complex Operation Course (or the "PS Shutdown Course"), and organised by the ex-PS division until last year, it is now organised as a joint venture between the AB division and Technical Training, and open to a wider CERN community. The AXEL-2003 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course and the course supports will be in English, with questions and answers also in French. Lectures will be recorded and available online via the Web Lectu...

  16. CERN Technical Training 2006: Software and System Technologies Curriculum - Scheduled Course Sessions (October-December 2006)

    CERN Multimedia

    2006-01-01

    he Software and System Technologies Curriculum of the CERN Technical Training Programme offers comprehensive training in C++, Java, Perl, Python, XML, OO programming, JCOP/PVSS, database design and Oracle. In the PERL, C++, OO and Java course series there are some places available on the following course sessions, scheduled until the end of this year: Object-Oriented Analysis and Design using UML: 17-19 October 2006 (3 days) JAVA 2 Enterprise Edition - Part 1: Web Applications: 19-20 October 2006 (2 days) JAVA - Level 1: 30 Oct. -1 Nov. 2006 (3 days) PERL 5 - Advanced Aspects: 2 November 2006 (1 day) C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming: 14-16 November 2006 (3 days) JAVA - Level 2: 4-7 December 2006 (4 days) C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls: 12-15 December 2006 (4 days) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans : 18.20 December 2006 (3 days) All the above sessions will be given in English, at the CERN Training Centre....

  17. CERN Technical Training 2003: Learning for the LHC ! DISP-2003  -  Digital Signal Processing

    CERN Multimedia

    2003-01-01

    DISP-2003 is a two-term course given by CERN and University of Lausanne (UNIL) experts within the framework of the Technical Training Programme. The course will review the current techniques dealing with Digital Signal Processing. The DISP-2003 lecture series is composed of two Terms, and it is intended for an audience who work or will work on digital signal processing aspects, and who need an introductory or refresher/update course. The course will be in English, with questions and answers also in French. Spring 1 Term: DISP-2003: Introduction to Digital Signal Processing 20 February 2003 - 3 April 2003, 7 lectures, Thursdays (attendance cost: 70.- CHF, registration required) Lecturers: Maria Elena Angoletta, AB-BDI; Guy Baribaud, AB-BDI; Philippe Baudrenghien, AB-RF; Laurent Deniau, AT-MTM Programme: 'Classical' digital signal processing. Fourier analysis. The Laplace transform. The z-transform. Digital filters. Statistics for Signal Processing. Signal Estimation and Spectral Analysis. Spring 2 T...

  18. CERN Technical Training 2003: Learning for the LHC! DISP-2003 - Digital Signal Processing

    CERN Multimedia

    2003-01-01

    DISP-2003 is a two-term course given by CERN and University of Lausanne (UNIL) experts within the framework of the Technical Training Programme. The course will review the current techniques dealing with Digital Signal Processing, and it is intended for an audience who work or will work on digital signal processing aspects, and who need an introductory or refresher/update course. The course will be in English, with question and answers also in French. Spring 2 Term: DISP-2003: Advanced Digital Signal Processing 30 April 2003 - 21 May 2003, 4 lectures, Wednesdays afternoon. Attendance cost: 40.- CHF, registration required. Lecturers: Léonard Studer, UNIL; Laurent Deniau, AT-MTM; Elena Wildner, AT-MAS. Programme: Intelligent signal processing (ISP). Non-linear time series analysis. Image processing. Wavelets. Basic concepts and definitions have been introduced during the previous Spring 1 Term: DISP-2003: Introduction to Digital Signal Processing. DISP-2003 is open to all people interested, but registrat...

  19. CERN Technical Training 2003: Learning for the LHC ! DISP-2003 - Digital Signal Processing

    CERN Multimedia

    2003-01-01

    DISP-2003 - Digital Signal Processing DISP-2003 is a two-term course given by CERN and University of Lausanne (UNIL) experts within the framework of the Technical Training Programme. The course will review the current techniques dealing with Digital Signal Processing, and it is intended for an audience who work or will work on digital signal processing aspects, and who need an introductory or refresher/update course. The course will be in English, with question and answers also in French. Spring 2 Term: DISP-2003: Advanced Digital Signal Processing 30 April 2003 - 21 May 2003, 4 lectures, Wednesdays afternoon (attendance cost: 40.- CHF, registration required) Lecturers: Léonard Studer, UNIL; Laurent Deniau, AT-MTM; Elena Wildner, AT-MAS Programme: Intelligent signal processing (ISP). Non-linear time series analysis. Image processing. Wavelets. (Basic concepts and definitions have been introduced during the previous Spring 1 Term: DISP-2003: Introduction to Digital Signal Processing). DISP-2003 is open...

  20. CERN Technical Training Programme: Learning for the LHC ! CLEAN-2002: Working in a Cleanroom

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Exceptional session in Italian on June 13, 2002 (am). CLEAN-2002 is a new, free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed. More information and registration through EDH is available here. The next session will be held in Italian, on 13 June (morning), following a specific request. Other sessions, in French and English, will be offered following demand: the first session in French will be organised in July 2002. Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

  1. CERN Technical Training 2005 - ELEC-2005: Electronics in High Energy Physics

    CERN Multimedia

    Monique Duval

    2004-01-01

    Learning for the LHC!ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the successful ELEC-2002 course series. This comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments.ELEC-2005 is composed of four Terms that will run throughout the year:Winter Term: Introduction to electronics in HEP (January-February, 6 lectures) Spring Term: Integrated circuits and VLSI technology for physics (March, 6 lectures) Summer Term: System electronics for physics: Issues (May, 7 lectures) Winter Term: Electronics applications in HEP experiments (November-December, 10 lectures) Lectures within each Term will take place on Tuesdays and Thursd...

  2. CERN Technical Training 2004: New Short Courses (SC) on Microsoft Outlook

    CERN Multimedia

    Monique Duval

    2004-01-01

    The CERN Technical Training programme is now proposing a new format for courses on Microsoft Outlook. Three two-hours Short Courses (SC) will cover basic and advanced functionalities of the recommended mail client for email at CERN. Each module can be followed independently. The next scheduled sessions will take place as follows: Outlook (SC I): E-mail. Next session: 31.8.2004 (9h00-11h00) Outlook (SC II): Calendar, Tasks and Notes. Next session: 31.8.2004 (14h00-16h00) Outlook (SC III): Meetings and Delegation. Next session: 7.9.2004 (14h00-16h00) In particular, SC I will cover how to open, create and send email, work with attachments, use stationery, organise mail, and work with the address book, SC II will show how to work with the calendar, tasks and notes, and SC III will cover how to organise and manage meetings, work with meeting requests, share tasks, and use email and calendar delegation. The number of participants to each session is limited to 8. The instructor is English-French bilingual, and she...

  3. CERN Technical Training 2004: New Short Courses (SC) on Microsoft Outlook

    CERN Multimedia

    Monique Duval

    2004-01-01

    The CERN Technical Training programme is now proposing a new format for courses on Microsoft Outlook. Three two-hours Short Courses (SC) will cover basic and advanced functionalities of the recommended mail client for email at CERN. Each module can be followed independently. The next scheduled sessions will take place as follows: Outlook (SC I): E-mail. Next session: 22.10.2004 (9h00-11h00) Outlook (SC II): Calendar, Tasks and Notes. Next session: 22.10.2004 (14h00-16h00) Outlook (SC III): Meetings and Delegation. Next session: 9.11.2004 (14h00-16h00) In particular, SC I will cover how to open, create and send email, work with attachments, use stationery, organise mail, and work with the address book, SC II will show how to work with the calendar, tasks and notes, and SC III will cover how to organise and manage meetings, work with meeting requests, share tasks, and use email and calendar delegation. The number of participants to each session is limited to 8. The instructor is English-French bilingual, and...

  4. CERN Technical Training 2004: New Short Course III (SC III) on Microsoft Outlook - Meetings and Delegation

    CERN Multimedia

    Monique Duval

    2004-01-01

    The CERN Technical Training programme is now proposing a new format for courses on Microsoft Outlook. Three two-hours Short Courses (SC) cover basic and advanced functionalities of the recommended mail client for email at CERN. Each module can be followed independently. The next scheduled session of the 3rd module will take place as follows: Outlook (SC III): Meetings and Delegation. Next session: 9.11.2004 (14:00-16:00) SC III will cover how to organise and manage meetings, work with meeting requests, share tasks, and use email and calendar delegation. The number of participants to each session is limited to 8. The instructor is English-French bilingual, and she will be available some time after each session to answer specific questions, or provide further explanations following demand. The cost of attending any SC module on Outlook is 70.- CHF. The above session will be confirmed if there are enough participants, and the attendance costs will be lower in case of a full class. If you are interested in...

  5. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  6. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Marie Lahchimi, Technical Training Administration (Tel: 74924)

  7. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  8. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tél : 74924)  

  9. Technical training - places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  10. CERN Technical Training 2006: Software and System Technologies Curriculum - Scheduled Course Sessions (October 2006-March 2007)

    CERN Multimedia

    2006-01-01

    The Software and System Technologies Curriculum of the CERN Technical Training Programme offers comprehensive training in C++, Java, Perl, Python, XML, OO programming, JCOP/PVSS, database design and Oracle. In the Oracle, C++, OO and Java course series there are some places available on the following course sessions, currently scheduled until March 2007: Object-Oriented Analysis and Design using UML: 17-19 October 2006 (3 days) JAVA - Level 1: 30 October - 1 November 2006 (3 days) C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming: 14-16 November 2006 (3 days) Oracle Database Server Administration: 23-29 November 2007 (5 days) JAVA - Level 2: 4-7 December 2006 (4 days) C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls: 12-15 December 2006 (4 days) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 18-20 December 2006 (3 days) JAVA 2 Enterprise Edition - Part 1: Web Applications: 15-16 January 2007 (2 days) C++ Programming Part 3 - Templates and the STL (St...

  11. CERN Technical Training 2006: Software and System Technologies Curriculum - Scheduled Course Sessions (August-December 2006)

    CERN Multimedia

    2006-01-01

    The Software and System Technologies Curriculum of the CERN Technical Training Programme offers comprehensive training in C++, Java, Perl, Python, XML, OO programming, JCOP/PVSS, database design and Oracle. In the PERL, C++, OO and Java course series there are some places available on the following course sessions, scheduled until the end of this year: PERL 5 - Introduction: 31.8-1.9.2006 (2 days) C++ for Particle Physicists: 16-20.10.2006 (6 half days, the popular course given by Paul Kunz) Object-Oriented Analysis and Design using UML: 17-19.10.2006 (3 days) JAVA 2 Enterprise Edition - Part 1: Web Applications: 19-20.10.2006 (2 days) JAVA - Level 1: 30.10-1.11.2006 (3 days) PERL 5 - Advanced Aspects: 2.11.2006 (1 day) C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming: 14-16.11.2006 (3 days) JAVA - Level 2: 4-7.12.2006 (4 days) C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls: 12-15.12.2006 (4 days) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBea...

  12. CERN Technical Training 2005: New Short Course (SC) Sessions on Office Software - July 2005

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The following new course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2005, within the Office Software curriculum: OUTLOOK 2003 (Short Course I) - E-mail : 6.7.2005 (morning) OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes : 7.7.2005 (morning) OUTLOOK 2003 (Short Course III) - Meetings and Delegation : 8.7.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks: 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge : 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae : 7.7.2005 (afternoon) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing : 8.7.2005 (afternoon) All the above sessions are organised in the new format of Short Courses (SC): 3 hour sessions (9h30-12h30 or 14h30-17h30), at a nominal cost of 75.- CHF per person per course. Any course can be followed independe...

  13. CERN Technical Training 2006: LabVIEW Course Sessions (September-December 2006)

    CERN Multimedia

    2006-01-01

    The following LabVIEW course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2006, and in collaboration with National Instruments (CH): LabVIEW Basics 1 (course in English): 11-13.9.2006 (3 days, only 3 places available) (course in English): 14-15.9.2006 (2 days) LabVIEW: Working efficiently with LabVIEW 8 (course in English): 18.9.2006 (1 day) **NEW COURSE** LabVIEW Application Development (course in English): 13-15.11.2006 (3 days. Pre-requisite: LabVIEW Basics I ans II, or equivalent experience) LabVIEW Advanced Programming (course in English): 16-17.11.2006 (2 days. Pre-requisite: LabVIEW Application Development, or equivalent experience) LabVIEW Base 1 (course in French): 4-6.12.2006 (3 days, only 1 place available) LabVIEW Base 2 (course in French): 7-8.12.2006 (2 days) If you are interested in attending any of the above course sessions, please discuss with your supervisor and/or your DTO,...

  14. CERN Technical Training 2006: LabVIEW Course Sessions (September-December 2006)

    CERN Multimedia

    2006-01-01

    The following LabVIEW course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2006, and in collaboration with National Instruments (CH): LabVIEW Basics 1 (course in English): 11-13.9.2006 (3 days, only 3 places available) LabVIEW Basics 2 (course in English): 14-15.9.2006 (2 days) LabVIEW: Working efficiently with LabVIEW 8 (course in English): 18.9.2006 (1 day) **NEW COURSE** LabVIEW Application Development (course in English): 13-15.11.2006 (3 days. Pre-requisite: LabVIEW Basics I ans II, or equivalent experience) LabVIEW Advanced Programming (course in English): 16-17.11.2006 (2 days. Pre-requisite: LabVIEW Application Development, or equivalent experience) LabVIEW Base 1 (course in French): 4-6.12.2006 (3 days, only 1 place available) LabVIEW Base 2 (course in French): 7-8.12.2006 (2 days) If you are interested in attending any of the above course sessions, please discuss with your supervisor and/or your DTO, and apply electronically via EDH from the cour...

  15. CERN Technical Training 2008: Learning for the LHC! FLUKA Workshop 2008: 23-27 June 2008

    CERN Multimedia

    2008-01-01

    http://www.cern.ch/Fluka2008 FLUKA is a fully integrated particle physics Monte-Carlo simulation package. It has many applications in high energy experimental physics and engineering, shielding, detector and telescope design, cosmic ray studies, dosimetry, medical physics and radio-biology. More information, as well as related publications, can be found on the official FLUKA website (http://www.fluka.org). This year, the CERN FLUKA Team, in collaboration with INFN and SC/RP, is organizing a FLUKA beginners course, held at CERN for the first time. Previous one-week courses were given in Frascati (Italy), twice in Houston (Texas, US), Pavia (Italy), as well as in Legnaro (Italy). At CERN, continuous lectures are provided in the framework of locally scheduled ‘FLUKA User Meetings’ (http://www.cern.ch/info-fluka-discussion). This new dedicated one-week CERN training course will be an opportunity for new users to learn the basics of FLUKA, as well as offering the possibility to broaden their knowledge about t...

  16. CERN Technical Training 2008: Learning for the LHC! FLUKA Workshop 2008: 23-27 June 2008

    CERN Multimedia

    2008-01-01

    http://www.cern.ch/Fluka2008 FLUKA is a fully integrated particle physics Monte-Carlo simulation package. It has many applications in high energy experimental physics and engineering, shielding, detector and telescope design, cosmic ray studies, dosimetry, medical physics and radio-biology. More information, as well as related publications, can be found on the official FLUKA website (http://www.fluka.org). This year, the CERN FLUKA Team, in collaboration with INFN and SC/RP, is organizing a FLUKA beginner’s course, held at CERN for the first time. Previous one-week courses were given in Frascati (Italy), twice in Houston (Texas, US), Pavia (Italy), as well as in Legnaro (Italy). At CERN, continuous lectures are provided in the framework of locally scheduled ‘FLUKA User Meetings’ (http://www.cern.ch/info-fluka-discussion). This new dedicated one-week CERN training course will be an opportunity for new users to learn the basics of FLUKA, as well as offering the possibility to broaden their knowledge abou...

  17. CERN's technical apprentices during their apprenticeships

    CERN Multimedia

    Adrian Billet

    2004-01-01

    CERN starting training apprentices in 1966 at the request of the Geneva authorities. The programme was consolidated with the opening of the training centre in 1971. In recent years CERN has taken on seven new technical apprentices each year (four in electronics, three in physics laboratory work), plus one or two administrative apprentices, such that there always are around 30 apprentices in total at CERN. The programme is highly regarded in Geneva by the authorities, industry, schools and young people, and contributes very positively to CERN's local image. Since the beginning 160 young people have now successfully completed their apprenticeships at CERN. Unlike some other employers, as a general rule CERN does not take on its ex-apprentices as staff; on completing their years at CERN the apprentices usually go on to higher education or are sought after by other employers.

  18. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

  19. CERN Technical Training 2006: 'Comprehensive VHDL for FPGA Design' and 'Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE' course sessions, May-June 2006

    CERN Multimedia

    2006-01-01

    Learning for the LHC! The next session of the course 'Comprehensive VHDL for FPGA Design' given in English by Doulos Ltd (UK) will take place at CERN from May 29 through June 2nd (5 days), for a maximum of 14 participants. It will be preceded by an optional, refresher session of the two-day course 'Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE', given on 23-24 May, in French, by Serge Brobecker of IT/DES. For more information, please visit the Technical Training CTA website, http://cta.cern.ch/cta2/f?p=300, to consult the detailed course descriptions and to apply via EDH. Organiser: Davide Vitè / HR-PMD / 75141 Davide.Vite@cern.ch ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING technical.training@cern.ch

  20. CERN Technical Training 2005: MAGNE-05 - Magnétisme pour l’électrotechnique

    CERN Multimedia

    Davide Vitè

    2005-01-01

    If you wish to participate in one of the following courses, please tell to your supervisor and apply electronically from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Departmental Secretariat or from your DTO (Departmental Training Officer). Applications will be accepted in the order in which they are received. Learning for the LHC ! Phénomènes magnétiques, matériaux et applications MAGNE-05 est un cours dans le cadre du programme de l’Enseignement Technique qui s’adresse aux personnes souhaitant découvrir, améliorer ou remettre à niveau leurs connaissances en magnétisme. Le cours est donné au CERN par la société CEDRAT Technologies basée à Meylan (France). La participation est ouverte à l’ensemble du personnel technique et scientifique nécessitant une formation en magnétisme dans le cadre de leurs activités professionnelles, courantes ou futures. Une importante économie p...

  1. Technical Training: WBTechT offers online training

    CERN Multimedia

    Monique Duval

    2005-01-01

    CERN Technical Training 2005 The 2005 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications and 90.- CHF for technical applications for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTO to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

  2. Technical Training: WBTechT offers online training

    CERN Multimedia

    Monique Duval

    2005-01-01

    CERN Technical Training 2005 The 2005 CERN Web-Based Technical Training portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications and 90.- CHF for technical applications for three months' unlimited access. Visit the WBTechT portal or http://www.cern.ch/TechnicalTraining, and contact Technical.Training@cern.ch or your DTOs to find out more information. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

  3. Technical infrastructure monitoring at CERN

    CERN Document Server

    Stowisek, Jan; Suwalska, Anna

    2006-01-01

    The Technical Infrastructure Monitoring system (TIM) is used to monitor and control CERN's technical services from the CERN Control Centre (CCC). The system's primary function is to provide CCC operators with reliable real-time information about the state of the laboratory's extensive and widely distributed technical infrastructure. TIM is also used to monitor all general services required for the operation of CERN's accelerator complex and the experiments. A flexible data acquisition mechanism allows TIM to interface with a wide range of technically diverse installations, using industry standard protocols wherever possible and custom designed solutions where needed. The complexity of the data processing logic, including persistence, logging, alarm handling, command execution and the evaluation of datadriven business rules is encapsulated in the system's business layer. Users benefit from a suite of advanced graphical applications adapted to operations (synoptic views, alarm consoles, data analysis tools etc....

  4. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrates unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) 10:30 -...

  5. CERN Technical Training 2008: Learning for the LHC! SECRETS OF A SUCCESSFUL WEBSITE

    CERN Multimedia

    2008-01-01

    Ever wondered what attracts people to a website time and time again? Want to know the secrets to creating a successful website? Perhaps you don’t know where to start when you are asked to build a website? Then sign up for two brand-new courses being offered within the Technical Training Program! In the first course (1-day) – Designing effective websites – you will be guided through the A-Z of creating a great site or improving an existing one. Through interactive sessions and practical exercises, you will learn handy tips and best practices in web design, writing for the web, planning, coding and production. While being independent of any particular software or content management system, you will come away armed with the knowledge required to produce your site. The second course (2-days) – Writing effectively for the web – explains how to communicate effectively on the web by packaging, writing and editing your content to meet the needs of your readers. In an age where we are inundated with cool to...

  6. CERN Technical Training 2008: Learning for the LHC! SECRETS OF A SUCCESSFUL WEBSITE

    CERN Multimedia

    2008-01-01

    Ever wondered what attracts people to a website time and time again? Want to know the secrets to creating a successful website? Perhaps you don’t know where to start when you are asked to build a website? Then sign up for two brand-new courses being offered within the Technical Training Program! In the first course (1-day) – Designing Effective Websites – you will be guided through the A-Z of creating a great site or improving an existing one. Through interactive sessions and practical exercises, you will learn handy tips and best practices in web design, writing for the web, planning, coding and production. While being independent of any particular software or content management system, you will come away armed with the knowledge required to produce your site. The second course (2-days) – Writing Effectively for the Web – explains how to communicate effectively on the web by packaging, writing and editing your content to meet the needs of your readers. In an age where we are inundated with cool to...

  7. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

  8. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

  9. CERN Technical Training 2002: Learning for the LHC! Introduction à la CAO CADENCE - French version only

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Dans le cadre du suivi du programme ELEC-2002 : Electronics in HEP, une nouvelle session du cours Introduction à la CAO CADENCE. De la saisie de schéma Concept-HDL au PCB est programmée pour le 4 et 5 juin prochains. Le cours, en français, est gratuit et sera animé par Serge Brobecker de la division IT/PS/EAS. Objectif de cette formation est de donner une vue générale du système CAO CADENCE utilisé au CERN, et d'en connaître l'environnement et les possibilités, en acquérant des notions suffisantes pour utiliser la saisie de schéma. Le cours est ciblé pour une audience d'ingénieurs et techniciens désirant utiliser les outils CAO disponibles au CERN, afin de concevoir des circuits logiques et des circuits programmables digitaux. Plus d'information, et possibilité d'inscription par EDH sont accessibles depuis les pages «...

  10. CERN Technical Training 2005: MAGNE-05 - Magnétisme pour l'électrotechnique

    CERN Multimedia

    Davide Vitè

    2005-01-01

    Learning for the LHC ! Phénomènes magnétiques, matériaux et applications MAGNE-05 est un cours dans le cadre du programme de l'Enseignement technique qui s'adresse aux personnes souhaitant découvrir, améliorer ou remettre à niveau leurs connaissances en magnétisme. Le cours est donné au CERN par la société CEDRAT Technologies basée à Meylan (France). La participation est ouverte à l'ensemble du personnel technique et scientifique nécessitant une formation en magnétisme dans le cadre de leurs activités professionnelles, courantes ou futures. Une importante économie par participant est réalisée par rapport aux frais nécessaires pour suivre la même formation sur le site de CEDRAT en France. MAGNE-05 s'intéresse, entre autres, au développement de la compréhension des phénomènes magnétiques et au « sens physique », appliqués à des produits industriels. Programme : Notions de base en électromagnétisme. Les aspects électrique et mécanique du magnétisme. Les régimes variab...

  11. CERN Technical Training 2005: MAGNE-05 - Magnétisme pour l’électrotechnique

    CERN Multimedia

    Davide Vitè

    2005-01-01

    Learning for the LHC ! Phénomènes magnétiques, matériaux et applications MAGNE-05 est un cours dans le cadre du programme de l’Enseignement Technique qui s’adresse aux personnes souhaitant découvrir, améliorer ou remettre à niveau leurs connaissances en magnétisme. Le cours est donné au CERN par la société CEDRAT Technologies basée à Meylan (France). La participation est ouverte à l’ensemble du personnel technique et scientifique nécessitant une formation en magnétisme dans le cadre de leurs activités professionnelles, courantes ou futures. Une importante économie par participant est réalisée par rapport aux frais nécessaires pour suivre la même formation sur le site de CEDRAT en France. MAGNE-05 s’intéresse, entre autres, au développement de la compréhension des phénomènes magnétiques et au « sens physique », appliqués à des produits industriels. Programme : Notions de base en électromagnétisme. Les aspects électrique et mécanique du magnétisme. Les régim...

  12. CERN Technical Training 2006: Introduction à Dreamweaver MX (26-27 juillet 2006)

    CERN Document Server

    2006-01-01

    CERN Enseignement technique 2006: Introduction à Dreamweaver MX (26-27 juillet 2006) Learning for the LHC! Une nouvelle session du cours pratique Introduction à Dreamweaver MX est proposée à l'ensemble du personnel par le service de l'Enseignement technique. Cette session aura lieu en français mercredi 26 et jeudi 27 juillet 2006. Objectifs: Maîtriser les différentes fonctions de base de Dreamweaver MX pour créer et gérer des pages ou des sites web. Programme: L'interface Dreamweaver MX. Images, couleurs et fonds. Ajouter des liens. Présenter des données en tables. Utiliser les tables pour la mise en page. L'Interface mise en page. L'image réactive. Les tags META et les moteurs de recherche. Les formulaires. Les éléments dynamiques. Boutons dynamiques. Boutons flash et texte. La barre de navigation. Les styles HTML. Feuilles de style. Positionnement par couches. Gestion du site. Révision générale et évaluation. Durée: 2 jours. Coût estimé: entre 750.- et 350.- CHF par personne, se...

  13. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The Joint PVSS JCOP Framework: 14 - 18.6.2004 (5 days) EXCEL 2003 - niveau 2 : 17 & 18.6.2004 (2 jours) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 au 8.7.2004 (3 jours) Technical Training Monique Duval - Tel.74924 technical.training@cern.ch

  14. CERN Technical training 2008 - Learning for the LHC: Special Workshop demonstrating reliability with accelerated testing

    CERN Multimedia

    2008-01-01

    Larry Edson’s workshop will show examples of quantitative reliability predictions based upon accelerated testing and demonstrates that reliability testing during the prototyping phase will help ascertain product shortcomings. When these weak points are addressed and the redesigned product is re-tested, the reliability of that product will become much higher. These methodologies successfully used in industry might be exceedingly useful also for component development in particle physics where reliability is of utmost importance. This training will provide participants with the skills necessary to demonstrate reliability requirements using accelerated testing methods. The workshop will focus on accelerated test design that employs increased stress levels. This approach has the advantage of reducing test time, sample size and test facility resources. The methodologies taught are applicable to all types of stresses, spanning the electro...

  15. CERN Technical training 2008 - Learning for the LHC: Special Workshop demonstrating reliability with accelerated testing

    CERN Multimedia

    2008-01-01

    Larry Edson’s workshop will show examples of quantitative reliability predictions based upon accelerated testing and demonstrate that reliability testing during the prototyping phase will help ascertain product shortcomings. When these weak points are addressed and the redesigned product is re-tested, the reliability of that product will become much higher. These methodologies successfully used in industry might be exceedingly useful also for component development in particle physics where reliability is of the utmost importance. This training will provide participants with the skills necessary to demonstrate reliability requirements using accelerated testing methods. The workshop will focus on accelerated test design that employs increased stress levels. This approach has the advantage of reducing test time, sample size and test facility resources. The methodologies taught are applicable to all types of stresses, spanning the elec...

  16. CERN Technical training 2008 - Learning for the LHC: Special workshop demonstrating reliability with accelerated testing

    CERN Multimedia

    2008-01-01

    Larry Edson’s workshop will show examples of quantitative reliability predictions based upon accelerated testing and demonstrate that reliability testing during the prototyping phase will help ascertain product shortcomings. When these weak points are addressed and the redesigned product is re-tested, the reliability of that product will become much higher. These methodologies successfully used in industry might be exceedingly useful also for component development in particle physics where reliability is of the utmost importance. This training will provide participants with the skills necessary to demonstrate reliability requirements using accelerated testing methods. The workshop will focus on accelerated test design that employs increased stress levels. This approach has the advantage of reducing test time, sample size and test facility resources. The methodologies taught are applicable to all types of stresses, spanning the elec...

  17. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW...

  18. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002: Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW hands-on (E):...

  19. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.09.2004 (4 jours) Introduction to the CERN EDMS : 22.6.2004 (1 day) The CERN EDMS for local administrators : 23 & 24.6.2004 (2 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 - 8.7.2004 (3 jours) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING...

  20. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Project Planning with MS-Project :6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1: 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1 : 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL : 2 - 4.6.2...

  1. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 days) LabVIEW Hands-on : 20.4.2004 (half-day, p.m.) FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 -...

  2. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 - 30.4.2004 (5 days) Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Pla...

  3. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Planning with MS-Project : 6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 10 - 12.5.2004 (3...

  4. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Hands-on Introduction to Python Programming : 12 - 14.11.03(3 days) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) C++ for Particle Physicists : 17 - 21.11.03 (6 X 3-hour lectures) Programmation automate Schneider TSX Premium - niveau 2 : 18 - 21.11.03 (4 jours) Project Planning with MS-Project  (free of charg...

  5. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval Tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The EDMS-MTF in practice (free of charge) : 28 -  30.10.03 (6 half-day sessions) AutoCAD 2002 – Level 1 : 3, 4, 12, 13.11.03 (4 days) LabVIEW TestStand ver. 3 : 4 & 5.11.03 (2 days) Introduction to PSpice : 4.11.03 p.m. (half-day) Hands-on Introduction to Python Programming : 12 – 14.11.03 (3 days) ACCESS ...

  6. Technical Training: Places Available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Oracle 9i: SQL: 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9i : New f...

  7. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) VisualEliteHDL : 25 & 26.5.2004 (2 days) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9...

  8. Technical Training: Places available**

    CERN Document Server

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 : 9 & 10.1.2004 (2 days) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions) LabVIEW hands-on (E) 16.3...

  9. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 1.4.2004 (morning) FrontPage XP - niveau 1 : 5 & 6.4.2004 (2 jours) AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 day...

  10. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Pa...

  11. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study for Microsoft applications :12.2.2004 (morning) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) CLEAN-2002 ...

  12. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW base 1 : 25 - 27.2.2004(3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) LabVIEW hands-on (E) : 16.3.2004 (afternoon) LabVIEW Basics 1 : 22 - 24.3.2004 ...

  13. Technical training - places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department »Electronics design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 3 places available Foundations of Electromagnetism and Magnet Design (EMAG) 14-Nov-12 to 27-Nov-12 6 days English 20 places available Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 15 places available Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 7 places available LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places available »Mechanical design Next Se...

  14. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Introduction to VHDL 21-Feb-13 to 22-Feb-13 2 days English Mechanical design Next Session Duration Language ANSYS - Introduction à ANSYS Mechanical APDL 04-Feb-13 to 07-Feb-13 4 days English Applications de la cotation fonctionnelle et du langage ISO 06-Feb-13 to 08-Feb-13 2 days 4 hours French CATIA V5 – Surfacique 14-Jan-13 to 15-Jan-13 2 days French Office software Next Session Duration Language ACCESS 2010 - niveau 2 : ECDL 06-Feb-13 to 07-Feb-13 2 days French Dreamweaver CS3 - Niveau 1 14-Jan-13 to 15-Jan-13 2 d...

  15. Technical training - Places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Availability Certified LabVIEW Associate Developer (CLAD) 06-Dec-12 to 06-Dec-12 1 hour English One more place available Compatibilité électromagnetique (CEM): Applications 23-Nov-12 to 23-Nov-12 3.5 hours English 3 places available Compatibilité électromagnétique (CEM): Introduction 23-Nov-12 to 23-Nov-12 3 hours English 43 places available Effets des Radiations sur les composants et systèmes électroniques 11-Dec-12 to 12-Dec-12 1 day 4 hours French 9 places available LabVIEW for beginners ...

  16. CERN Technical Training Programme: Learning for the LHC ! Cotations selon les normes GPS de l'ISO - French version only

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Suite à la proposition du Groupe de travail « Mechanical Design » du Technical Training, et dans le cadre des activités de construction du LHC, nous allons offrir prochainement une séance en français du cours Cotations selon les normes GPS de l'ISO les 29 et 30 avril prochains. Le coût du cours est pour l'instant fixé à 400.- CHF, mais il pourrait être réduit suivant le nombre de participants. Les objectifs de cette formation sont la maîtrise du tolérancement géométrique ISO décrit dans les normes GPS (Spécifications Géométriques des Produits), et une correcte démarche, par la suite, pour la cotation des produits. Le cours est ciblé pour une audience de projeteurs et dessinateurs devant concevoir, dimensionner et tolérancer des pièces mécaniques, et pour ...

  17. Technical training: places available

    CERN Multimedia

    HR Department

    2007-01-01

    CERN Technical Training: Open Courses (April - June 2007) The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007:   AutoCAD 2006 - niveau 1 (course in French): 25.4.- 26.4.2007 & 2.5. - 3.5.2007 (4 days in 2 modules, 5 places available) AutoCAD 2006 - niveau 1 (course in French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, 5 places available) AutoCAD Mechanical 2006 (course in French) 21.6.-22.6.2007 (2 days, 8 places available) * NEW COURSE* Automate de securite S7 (course in French) 14.5.-16.5.2007 (3 days, 4 places available) * NEW COURSE* Automate de securite S7 (course in French): 9.5.-11.5.2007 (3 days, 4 places available) JCOP - Joint PVSS-JCOP Frameswork (course in English): 21.5.-25.5.2007 (5 days, 12 places available) JCOP - Finite State Machines in the JCOP Frameswork (course in English): 12.6.-14.6.2007 (3 days, 12 places available) LabVIEW Basics 1 (in English): 2.-4.5.2007 (3 days, 7 places ...

  18. CERN hosts training event on international management

    CERN Multimedia

    2007-01-01

    CERN held its first training event on international management at the Globe on 2 October, sharing its expertise with high-level Swiss managers as part of their year-long part-time executive training programme on advanced management. CERN is often talked about in terms of impressive statistics: the coldest place in the universe, the largest accelerator, the greatest volume of data. Whilst the science is undeniably remarkable, it is backed by a management infrastructure that has to be as cutting-edge as the research it supports. On 2 October, the Learning and Development section of HR organised an event for 60 delegates to come to CERN to learn about international management from those who have taken on the management challenges at the heart of this unique institution. It was the first time that CERN had prepared such an event. SKU, a non-profit organisation, approached our management training team to arrange the event as part of a wee...

  19. Technical training: WBTechT offers online training

    CERN Multimedia

    Davide Vitè

    2006-01-01

    The 2006 CERN Web-Based Technical Training (WBTechT) portal is a computer-skills site offering multimedia learning. Visit http://www.course-source.net/sites/cern/ to self-register, consult the available programmes or request a course via EDH. A self-directed online course costs 50.- CHF for desktop applications (e.g. Microsoft Office Suite, Frontpage, Dreamweaver, Illustrator, Photoshop) and 90.- CHF for technical applications (e.g. Unix, Oracle, Java, JavaScript, C, C++) for three months'unlimited access. Visit the WBTechT portal, or the WBTechT information page at http://www.cern.ch/TechnicalTraining Contact: Technical.Training@cern.ch or your DTO to find out more information.

  20. CERN Academic training programme 2011

    CERN Multimedia

    PH Department

    2011-01-01

    Regular lecture   24, 25, 26 and 27 May 2011 from 11:00 to 12:00 at CERN (Bldg. 222-R-001 - Filtration Plant) Particle Dark Matter by Pippa Wells (CERN) I review the phenomenology of particle dark matter, including the process of thermal freeze-out in the early universe, and the direct and indirect detection of WIMPs. I also describe some of the most popular particle candidates for dark matter and summarize the current status of the quest to discover dark matter’s particle identity. Organiser: Maureen Prola-Tessaur/PH-EDU

  1. Technical training - Places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department Electronic Design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 4 places Electrostatique / Protection ESD 28-Sep-12 to 28-Sep-12 3 hours French 25 places Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 14 places Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 9 places LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places LabVIEW for Experts 24-Sep-12 to 28-Sep-12 5 days English 6 places LabVIEW for beginners 15-Oct-12 to 17-...

  2. Technical Training: C++ for Particle Physicists

    CERN Multimedia

    Monique Duval

    2005-01-01

    Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 7-11 March. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page : http://cern.ch/TechnicalTraining/ENSTEC/p2002/Software/cpppp_e.asp Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the ‘C++ for Particle Physicists' course and giving their name, CERN ID number, the Team account number to which the course fee should be charged, and VERY IMPORTANTLY an email address to which an invitation to the course can be sent. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

  3. Technical Training: ELEC-2005

    CERN Multimedia

    Davide Vitè

    2005-01-01

    ELEC-2005 - Electronics in High Energy Physics: Autumn Term (November-December 2005) ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the ELEC-2002 course series. This new, comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2005 is composed of four Terms. The Winter (Introduction to electronics in HEP), Spring (Integrated circuits and VLSI technology for physics), and Summer (System electronics for physics: Issues) Terms already took place. The Autumn Term: Electronics applications in HEP experiments (November-December, 10 lectures) is now open for online registration, and will start on November 8th with the...

  4. TECHNICAL TRAINING PROGRAMME

    CERN Multimedia

    Davide Vitè

    2002-01-01

    CLEAN-2002: Working in a Cleanroom A new, free of charge, half-day seminar is offered in the context of Technical Training for the LHC, for personnel working or managing activities in a cleanroom (for example physicists, engineers and technicians working at or visiting the laboratory). CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed, if possible. More information and registration is available HERE The next session, in English, will be on 24.4 (afternoon). Other sessions, in French and English, will be offered following demand. Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

  5. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 6 March TECHNICAL TRAINING SEMINAR from 9:30 to 16:45 - IT Amphitheatre - bldg. 31.3.004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars...

  6. Academic Training: Joint ILIAS-CAST-CERN Axion Training at CERN

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2005-2006 ACADEMIC TRAINING PROGRAMME 30 November, 1 and 2 December PLACE - DETAILS: http://agenda.cern.ch/fullAgenda.php?ida=a056218 Joint ILIAS-CAST-CERN Axion Training at CERN The ILIAS (Integrated Large Infrastructure for Astroparticle Science) is co-organising a 3 day academic training session together with the CAST collaboration and the CERN Academic Training Programme on physics related to axion research, including open discussions between theorists and experimentalists. The intention of the lectures is to provide academic training for scientists engaged in axion research and to facilitate the often missing link between experiment and theory with the aim of encouraging young researchers to communicate with experts in the field. The lectures include topics which are not regularly covered by standard lectures at universities and should lead to a deeper understanding of the physics related to axions, which covers a broad field from QCD to astrophysics and cosmology. There will be an opportunity for ...

  7. Academic Training: Joint ILIAS-CAST-CERN Axion Training at CERN

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2005-2006 ACADEMIC TRAINING PROGRAMME 30 November, 1 and 2 December PLACE - DETAILS: http://agenda.cern.ch/fullAgenda.php?ida=a056218 Joint ILIAS-CAST-CERN Axion Training at CERN The ILIAS (Integrated Large Infrastructure for Astroparticle Science) is co-organising a 3 day academic training session together with the CAST collaboration and the CERN Academic Training Programme on physics related to axion research, including open discussions between theorists and experimentalists. The intention of the lectures is to provide academic training for scientists engaged in axion research and to facilitate the often missing link between experiment and theory with the aim of encouraging young researchers to communicate with experts in the field. The lectures include topics which are not regularly covered by standard lectures at universities and should lead to a deeper understanding of the physics related to axions, which covers a broad field from QCD to astrophysics and cosmology. There will be an opportunity for ...

  8. Two national teams train at CERN

    CERN Document Server

    Alix Marcastel

    2011-01-01

    The Swedish and Czech national orienteering teams trained at CERN on Wednesday, at the invitation of the president of the orienteering club, Lennart Jirdén.   Tove Alexandersson, a junior member if the Swedish team.  Three weeks before she won gold, silver and bronze medals at the Junior World Championship.  The two national teams were training at Aix-les-Bains and were invited to come to CERN by the Laboratory's orienteering club. These top athletes had to find their bearings at CERN in the chilly July rain. CERN has a dynamic orienteering club which earned itself an international reputation by getting actively involved in the orienteering world championships last October, which took place in Geneva and Saint-Cergue and for which it prepared the routes. Having proved its worth on that occasion, the club will be helping to organise the next championships in 2012. CERN Map given to the runners. The triangle marks the starting line, and th...

  9. CERN Academic Training Programme 2011

    CERN Multimedia

    PH Department

    2011-01-01

    LECTURE SERIES 1, 2 and 3 February 2011 11:00-12:00 - Bldg. 222-R-001 - Filtration Plant LHC 2010: Summary of the Odyssey So Far and Near-Term Prospects by Paris Sphicas (CERN) In 2010, the LHC delivered proton-proton collisions at an energy of 7 TeV, significantly higher than what was previously attained. This has allowed the experiments to complete the commissioning of the detectors and to perform early measurements of key standard model processes. The inclusive production of particles, jets and photons, the observation of onia and heavy-flavored meson decays, the measurement of the W and Z cross sections, and the observation of top-quark production and decay constitute a full set of measurements which form the base from which searches for physics beyond the standard model can be launched. The results from a number of searches for supersymmetry and some exotic signatures are now appearing. The lectures will review this impressive list of physics achievements from 2010 and consider briefly what 2011 m...

  10. CERN Management & Communication Training programme

    CERN Multimedia

    2007-01-01

    Calendar of courses for November to December 2007Calendrier des cours prévus de novembre à décembre 2007 Please check our Web site to find out the number of places available which may vary.Veuillez consulter notre site Web pour connaître le nombre de places disponibles qui peut varier. Managing Teams (English) 13, 14, 15 November (Full) Communicating effectively - residential (Bilingual) 20, 21, 22 November (Full) FP7 Training - How to Negotiate and Administer Framework 7 Grant Agreements (English) 21 November (7 places available) Core Development Package for new Supervisors and Section leaders (MARS exercise) (English) 20, 21, 22 November (Full) Core Development Package for new Supervisors and Section leaders (MARS exercise) (français) 5, 6, 7 décembre (2 places disponibles) Core Development Pac...

  11. CERN Management & Communication Training programme

    CERN Multimedia

    2007-01-01

    Calendar of courses for November to December 2007Calendrier des cours prévus de novembre à décembre 2007 Please check our Web site to find out the number of places available which may vary.Veuillez consulter notre site Web pour connaître le nombre de places disponibles qui peut varier. Managing Teams (English) 13, 14, 15 November (Full) Communicating effectively - residential (Bilingual) 20, 21, 22 November (Full) FP7 Training - How to Negotiate and Administer Framework 7 Grant Agreements (English) 21 November (12 places available) Core Development Package for new Supervisors and Section leaders (MARS exercise) (English) 20, 21, 22 November (Full) Core Development Package for new Supervisors and Section leaders (MARS exercise) (français) 5, 6, 7 décembre (4 places disponibles) Core Development Pa...

  12. Technical Training Seminar

    CERN Document Server

    2003-01-01

    Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsi...

  13. Technical Training Seminar

    CERN Document Server

    2003-01-01

    Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsim ...

  14. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide VITÈ

    2002-01-01

    Wednesday 6 March   from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or con...

  15. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 6 March from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or contact the organiser.

  16. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Programmation STEP7 niveau 1 : 14-17.9.2004 (4 jours) ANSYS : Thermal Analysis : 22 - 24.9.2004 (3 days) LabVIEW Migration 6 à 7 : 23.9.2004 (one day) ANSYS : Advanced Topics : 27.9 - 1.10.2004 (5 days) Word 2003 - niveau 2 : 27 & 28.9.2004 (2 jours) LabVIEW - Basics 1 : 27 - 29.9.2004 (3 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 28 - 30.9.2004 (3 jours) LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) FrontPage 2003 - niveau 1 : 7 & 8.10.04 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924...

  17. Technical training - Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 16.5.2006 (May-November course sessions) Technical Training: Places available The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language ACROBAT 7.0 : Utilisation de fichiers PDF 8 8.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls 32 30.05-2.06.06 E ACROBAT 7.0 : Utilisation de fichiers PDF 24 7-9.06.06 E AutoCAD Mechanical 2006 16 13-14.06.06 F CERN EDMS for Local Administrators 16 13-14.06.06 E LabVIEW Base 2 32 27.06-5.07.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-...

  18. Technical Training: C++ for Particle Physicists

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 8 - 12 March. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page : http://cern.ch/TechnicalTraining/ENSTEC/p2002/Software/cpppp_e.asp Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the ‘C++ for Particle Physicists' ...

  19. Technical Training: C++ for Particle Physicists

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 8 - 12 March. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page: http://cern.ch/TechnicalTraining/ENSTEC/p2002/Software/cpppp_e.asp Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the ‘C++ for Particle Physicists' c...

  20. Technical Training: C++ for Particle Physicists

    CERN Multimedia

    Monique Duval

    2004-01-01

    Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 15 - 19 November. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page: Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the 'C++ for Particle Physicists' course and giving their name, CERN ID number, the Team account number to which the course fee should be charged, and VERY IMPORTANTLY an email address to which an invitation to the course can be sent. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

  1. Technical Training: C++ for Particle Physicists

    CERN Multimedia

    Monique Duval

    2004-01-01

    Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 15 - 19 November. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page. Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the 'C++ for Particle Physicists' course and giving their name, CERN ID number, the Team account number to which the course fee should be charged, and VERY IMPORTANTLY an email address to which an invitation to the course can be sent. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

  2. Technical Training: CLEAN-2002: Working in a Cleanroom

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch CERN Technical Training Programme: Learning for the LHC! CLEAN-2002 is a free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific ...

  3. CERN told to start technical thinking for next collider

    CERN Multimedia

    1998-01-01

    CERN has been told to begin technical design work for the successor to the LHC. A report commissioned last year, suggests that future design work should focus on developping cost-effective high-field magnets (1 page).

  4. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Introduction to the CERN EDMS : 22.6.2004 (1 day) The CERN EDMS for local administrators : 23 & 24.6.2004 (2 days) Compatibilité électromagnétique (CEM) - Introduction / Electromagnetic Compatibility (EMC) - Introduction: 7.7.2004 (morning) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.9.2004 (4 jours) Programmation STEP...

  5. Training course for eighteen teachers at CERN

    CERN Multimedia

    Laurianne Noemie Trimoulla

    2015-01-01

    From 8 to 10 December, 18 teachers from all over France attended a three-day training course on matter, organised by the LAMAP Foundation (Fondation La main à la pâte, see here) and hosted by CERN and S'Cool Lab. The LAMAP Foundation, set up by Georges Charpak in 1995, aims to help primary school teachers use the investigative process to instil the scientific spirit in their pupils.      Fired by curiosity and eager to learn, the teachers were introduced to the many and varied activities on offer at CERN, including the cloud chamber experiment, the Masterclass programme and the "Be a physicist" learning scheme. They particularly enjoyed their tours of Microcosm, the Synchrocyclotron and the ATLAS visitor centre, which stimulated many questions. They are eagerly looking forward to passing on their newly found knowledge to their pupils and perhaps even inspiring some to take up a career in physics! Last but not least, they were treat...

  6. Space shuttle crew training at CERN

    CERN Multimedia

    Paola Catapano

    From 13 to 16 October, the crew of NASA Space Shuttle mission STS-134 came to CERN for a special physics training programme. Invited here by Samuel Ting, they will deliver the Alpha Magnetic Spectrometer (AMS) detector to the International Space Station (ISS).   The STS134 crew in the Lodge at the Aiguille du Midi wearing CERN fleeces. From left to right: Captain Mark Kelly, US Navy; Pilot Gregory Johnson, USAF ret.; Mission Specialist Andrew Feustel; Mission Specialist Mike Fincke, USAF, Mission Specialist Gregory Chamitoff and Mission Specialist Roberto Vittori, ESA and Italian Air Force. Headed by Commander Mark Kelly, a US Navy captain, the crew included pilot Gregory Johnson, a US Air Force (USAF) colonel, and mission specialists Mike Fincke (also a USAF Colonel), Andrew Feustel, and Gregory Chamitoff of NASA, as well as Colonel Roberto Vittori of the European Space Agency (ESA). Two flight directors, Gary Horlache and Derek Hassmann of NASA, and the engineer responsible for the Ext...

  7. Launch of technical training courses for programmers

    CERN Multimedia

    2015-01-01

    This autumn, two new technical training courses have been launched for scientists and engineers at CERN who undertake programming tasks, particularly in C and C++. Both courses are taught by Andrzej Nowak, an expert in next-generation and cutting-edge computing technology research.   The training courses are organised in cooperation with CERN openlab and are sponsored by the CERN IT department – there is only a nominal registration fee of 50 CHF. This is an opportunity not to be missed! Computer architecture and hardware-software interaction (2 days, 26-27 October) The architecture course offers a comprehensive overview of current topics in computer architecture and their consequences for the programmer, from the basic Von Neumann schema to its modern-day expansions. Understanding hardware-software interaction allows the programmer to make better use of all features of available computer hardware and compilers. Specific architectural ...

  8. CERN'S TECHNICAL CONTROL ROOM (TCR) A CENTRAL SERVICE FOR EVERYONE

    CERN Multimedia

    Mario Batz

    2002-01-01

    The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate CERN equipment services or contractors. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number '72201'. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity covers the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, and buildings. These systems can either be part of the administrative infrastructure, such as offices or restaur...

  9. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP : 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003 : 30.6.2005 (IT Technical Training Tutorial, free of charge) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoC...

  10. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) size="2">(1journée) Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Shor...

  11. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 15 May 14:00 to 16:00 - Training Centre Auditorium - bldg. 593, room 11 Testing Embedded Software and Systems Ian Smith / SEVEN LAYER COMMUNICATIONS LTD, Edinburgh, Scotland The growing use of embedded processors has resulted in considerable challenges for software and system developers, to ensure that the products they produce function as required, without error. The increasing complexity of these products, and the systems they operate in, adds to the difficulty in testing these products effectively. These challenges will apply to the development of equipment and software for use on the LHC project. This seminar is aimed at anyone involved in the development and/or in the verification of embedded hardware, software or systems at CERN. It will provide an introduction to testing embedded products, and some insights into ways to address the growing complexity of modern embedded products. It will also show some of the methods Seven Layer Communications Ltd. have applied in developing effective test fac...

  12. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    NEW DATE AND TIME!!! Wednesday 26 June from 11:00 to 12:00 - Training Centre Auditorium - bldg. 593-11 High Temperature Superconductors: Progress and Issues Prof. Jan Evetts / UNIVERSITY OF CAMBRIDGE, Department of Materials Science and Metallurgy, UK Grappling with grain boundaries: Current transport processes in granular High Temperature Superconductors (HTS) The development of High Temperature Superconductors, seen from a materials scientist's point of view, is relevant to the superconductivity community at CERN: their possible high current applications can include high performance magnets for future accelerators. There is an urgent need to develop a quantitative description of HTS conductors in terms of their complex anisotropy, inhomogeneity and dimensionality. This is essential both for the practical specification of a conductor and for charting routes to conductor optimisation. The critical current, the n-value, dissipation and quenching characteristics are amongst most important parameters that make u...

  13. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Oracle 9i : New features for developers : 14 - 16.6.2004 (3 days) The Joint PVSS JCOP Framework: 14 - 18.6.2004 (5 days) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 15 & 16.6.2004 (2 jours) EXCEL 2003 - niveau 2 : 17 & 18.6.2004 (2 jours) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 au 8.7.2004 (3 jours) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.09.2004 (4 jours) ENSEIGNEMEN...

  14. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Hands-on Introduction to Python Programming: 1 - 3.9.2004 (3 days - free course) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.9.2004 (4 jours) Programmation STEP7 niveau 1 : 14-17.9.2004 (4 jours) FrontPage 2003 - niveau 1 : 20 & 21.9.2004 (2 jours) Word 2003 - niveau 2 : 27 & 28.9.2004 (2 jours) Introduction à Wind...

  15. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Joint PVSS JCOP Programming : 9 - 13.8.2004 (5 days) Hands-on Introduction to Python Programming: 1 - 3.9.2004 (3 days - free course) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) Joint PVSS JCOP Programming : 13 - 17.9.2004 (5 days) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.9.2004 (4 jours) Programmation STEP7 niveau 1 : 14-17.9.2004 (4...

  16. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Outlook (short course I) : E-mail : 31.8.2004 (2 hours, morning) Introduction à Outlook : Outlook (short course II) : Calendar, Tasks and Notes : 31.8.2004 (2 hours, afternoon) Instructor-led WBTechT Study or Follow-up for Microsoft Applications : 7.9.2004 (morning) Outlook (short course III) : Meetings and Delegation : 7.9.2004 (2 hours, afternoon) Introduction au VHDL et utilisation du simulateur ...

  17. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Joint PVSS JCOP Framework : 9 - 13.8.2004 (5 days) Introduction à Outlook : 19.8.2004 (1 jour) Outlook (Short Course I): E-mail: 31.8.2004 (2 hours, morning) Outlook (Short Course II): Calendar, Tasks and Notes: 31.8.2004 (2 hours, afternoon) Hands-on Introduction to Python Programming: 1 - 3.9.2004 (3 days - free course) Instructor-led WBTechT Study or Follow-up for Microsoft Applications: 7.9.20...

  18. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Joint PVSS JCOP Framework : 9 - 13.8.2004 (5 days) Introduction à Outlook : 19.8.2004 (1 jour) Outlook (Short Course I): E-mail: 31.8.2004 (2 hours, morning) Outlook (Short Course II): Calendar, Tasks and Notes: 31.8.2004 (2 hours, afternoon) Instructor-led WBTechT Study or Follow-up for Microsoft Applications: 7.9.2004 (morning) Outlook (Short Course III): Meetings and Delegation: 7.9.2004 (2 hours, afternoon) I...

  19. Technical training: AXEL-2012 - Introduction to Particle Accelerators

    CERN Multimedia

    HR Department

    2011-01-01

    CERN Technical Training 2012: Learning for the LHC! AXEL-2012 is a course series on particle accelerators, given at CERN within the framework of the Technical Training Program. Being part of BE Department’s Operation Group Shutdown Lecture series, the general accelerator physics module is organized since 2003 as a joint venture between the BE Department and Technical Training, and is open to a wider CERN community. The AXEL-2012 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) from the 16th – 20th of January 2012, and given in English with ...

  20. CERN Technical Training 2002: Learning for the LHC! HeREF-2002 : Techniques de la Réfrigération Hélium - French version only

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Théorie, Technologie, Entretien et Contrôle des Réfrigérateurs Hélium HeREF-2002 est un nouveau cours dans le cadre du programme de l'Enseignement Technique 2002, qui offre une présentation complète de la réfrigération hélium, avec une approche pratique de la théorie, la technologie, l'entretien et le contrôle des installations de réfrigération hélium. Les aspects théoriques et les équations seront réduits au maximum. HeREF-2002 concerne une assistance de techniciens et d'opérateurs d'installations de réfrigération hélium au CERN, autant que de physiciens et d'ingénieurs ayant besoin d'une bonne notion des techniques classiques de réfrigération hélium. HeREF-2002 s'intéresse, entre autres, à la technologie de...

  1. CERN'S TECHNICAL CONTROL ROOM (TCR) A CENTRAL SERVICE FOR EVERYONE

    CERN Multimedia

    Mario Batz

    2002-01-01

    The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate equipment services. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number '72201'. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity concerns the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, buildings. These systems can either be part of the administrative infrastructure, such as offices or restaurants, or part of the t...

  2. CERN'S TECHNICAL CONTROL ROOM (TCR) A CENTRAL SERVICE FOR EVERYONE

    CERN Multimedia

    Mario Batz (TCR Responsible)

    2001-01-01

    The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate equipment services. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number '72201'. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity concerns the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, buildings. These systems can either be part of the administrative infrastructure, such as offices or restaurants, or part of the t...

  3. CERN'S TECHNICAL CONTROL ROOM (TCR) A CENTRALSERVICE FOR EVERYONE

    CERN Document Server

    Mario Batz / TCR Responsible

    2001-01-01

    The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate equipment services. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number '72201'. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity concerns the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, buildings. These systems can either be part of the administrative infrastructure, such as offices or restaurants, or part of the t...

  4. CERN's Technical Control Room (TCR) A Central Service for Everyone

    CERN Document Server

    Mario Batz

    2001-01-01

    The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate equipment services. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number '72201'. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity concerns the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, buildings. These systems can either be part of the administrative infrastructure, such as offices or restaurants, or part of the t...

  5. CERN'S TECHNICAL CONTROL ROOM (TCR) A CENTRAL SERVICE FOR EVERYONE

    CERN Multimedia

    Mario Batz / TCR Responsible

    2000-01-01

    The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate equipment services. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number 72201. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity concerns the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, buildings. These systems can either be part of the administrative infrastructure, such as offices or restaurants, or part of the tec...

  6. CERN'S TECHNICAL CONTROL ROOM (TCR) A CENTRAL SERVICE FOR EVERYONE

    CERN Multimedia

    Mario Batz (TCR Responsible)

    2001-01-01

    The Technical Control Room (TCR) monitors and operates the entire technical infrastructure of CERN 24 hours a day, 365 days a year. It registers and dispatches troubleshooting requests to the appropriate equipment services. In addition, the TCR executes first-line interventions on the entire CERN site. Troubleshooting requests are transmitted to the TCR either via a computerised control system or via the phone number 72201. More than 10'000 such requests are dispatched and dealt with every year. The TCR's diverse field of activity concerns the following systems: electrical and fluid distribution networks, heating, cooling, ventilation, air-conditioning and gas equipment, safety and communication installations, electromechanical systems (e.g. lifts, cranes, machine tools, motorised doors), sanitary systems (leaks, sewage), control and monitoring infrastructure equipment, buildings. These systems can either be part of the administrative infrastructure, such as offices or restaurants, or part of the tec...

  7. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Tuesday 2 December From 10:00 to 16:00 - Training Centre Auditorium - bldg. 593, room 11 CST Customer Workshop - CST Computer Simulation Technology GmbH A Computer Simulation Technology (CST, http://www.cst.com) Customer Workshop is organised at CERN for people who are interested in 3D electromagnetic field simulation with CST Microwave Studio® and CST Design Studio. The CST Microwave Studio is a specialist tool for the fast and accurate 3D electromagnetic simulation of high frequency problems, with a broad application range, shorter development cycles, and virtual prototyping before physical trials. CST Design Studio provides a design environment where results from diverse simulators can be combined and analysed; a new version will be released in 2004. • 10:00 - 12:00 CST Microwave Studio, version 5. CAD-import and modelling. The new multilevel subgridding technique. Advanced new features of the T-, F- and E-solver. The user defined post-processing templates (first part). • 12:0...

  8. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Tuesday 2 December From 10:00 to 16:00 - Training Centre Auditorium - bldg. 593, room 11 CST Customer Workshop - CST Computer Simulation Technology GmbH A Computer Simulation Technology (CST, http://www.cst.com) Customer Workshop is organised at CERN for people who are interested in 3D electromagnetic field simulation with CST Microwave Studio® and CST Design Studio. The CST Microwave Studio is a specialist tool for the fast and accurate 3D electromagnetic simulation of high frequency problems, with a broad application range, shorter development cycles, and virtual prototyping before physical trials. CST Design Studio provides a design environment where results from diverse simulators can be combined and analysed; a new version will be released in 2004. 10:00 - 12:00 CST Microwave Studio, version 5. CAD-import and modelling. The new multilevel subgridding technique. Advanced new features of the T-, F- and E-solver. The user defined post-processing templates (first part). 12:00 - 13:00 Lunch. 13:00 - 1...

  9. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo (4 mornings) EXCEL 2003 (Short Course I) - HowTo... Work ...

  10. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 28.6 - 1.7.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) ACCES...

  11. CERN High School Teachers Training Programme meets DG

    CERN Multimedia

    Brice, Maximilien

    2014-01-01

    CERN's DG Rolf Heuer met with the participants of the High School Teachers Training Programme on 23 July 2014 for a Q&A Session. Following the interaction, he met with the HST Working Group collaborating on a lesson plan for teaching SESAME in high schools.

  12. CERN Academic Training Programme 2008/2009

    CERN Multimedia

    HR Department

    2008-01-01

    LECTURE SERIE 21-22-23 January 2009 11:00-12:00 hrs., Main Auditorium, Bldg 500-1-001 The Opposite Ends of Supersymmetry and their Implications for the LHC James WELLS / CERN-TH There have been many predictions for the mass patterns of superpartners. In these lectures I discuss two interesting opposite-end approaches to supersymmetry breaking that determine the superpartner masses: zero scalar mass supersymmetry (no scale, gaugino mediation, etc.) and heavy scalar mass supersymmetry (split susy, PeV-scale susy, etc.). We will step through the theory motivations for each scenario, and detail the rich phenomena that each implies for LHC discovery. 26-27-28 January 2009 11:00-12:00 hrs., Main Auditorium, Bldg 500-1-001 Electroweak symmetry breaking: to Higgs or not to Higgs Christophe Grojean / CERN-PH-TH How do elementary particles acquire their mass? What is making the photon different from the Z boson? In a word: How is electroweak symmetry broken? This is one of the pressing questions in particle phys...

  13. CERN Academic Training Programme 2008/2009

    CERN Multimedia

    HR Department

    2009-01-01

    LECTURE SERIES 21-22-23 January 2009 11:00-12:00 hrs., Main Auditorium, Bldg 500-1-001 The Opposite Ends of Supersymmetry and their Implications for the LHC James WELLS / CERN-TH There have been many predictions for the mass patterns of superpartners. In these lectures I discuss two interesting opposite-end approaches to supersymmetry breaking that determine the superpartner masses: zero scalar mass supersymmetry (no scale, gaugino mediation, etc.) and heavy scalar mass supersymmetry (split susy, PeV-scale susy, etc.). We will step through the theory motivations for each scenario, and detail the rich phenomena that each implies for LHC discovery. 26-27-28 January 2009 11:00-12:00 hrs., Main Auditorium, Bldg 500-1-001 Electroweak symmetry breaking: to Higgs or not to Higgs Christophe Grojean / CERN-PH-TH How do elementary particles acquire their mass? What makes the photon different from the Z boson? In a word: How is electroweak symmetry broken? This is one of the pressing...

  14. CERN Academic Training Programme 2008/2009

    CERN Multimedia

    HR Department

    2009-01-01

    LECTURE SERIES 26-27-28 January 2009 11:00-12:00, Main Auditorium, Bldg 500-1-001 Electroweak symmetry breaking: to Higgs or not to Higgs Christophe Grojean / CERN-PH-TH How do elementary particles acquire their mass? What makes the photon different from the Z boson? In a word: How is electroweak symmetry broken? This is one of the pressing questions in particle physics that the LHC will answer soon. The aim of this lecture is, after briefly introducing SM physics and the conventional Higgs mechanism, to give a survey of recent attempts to go beyond a simple elementary Higgs. In particular, I will describe composite models (where the Higgs boson emerges from a strongly-interacting sector) and Higsless models. Distinctive signatures at the LHC are expected and will reveal the true nature of the electroweak symmetry sector. 2-5 February 2009 11:00-12:00, Main Auditorium, Bldg 500-1-001 Statistical Techniques for Particle Physics Kyle Cranmer / CERN-PH This series will con...

  15. TECHNICAL TRAINING: Programmation automate Schneider TSX Premium 2ème niveau - French version only

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch CERN Technical Training 2003: Learning for the LHC ! Annonce de nouvelle formation - cours avancé Dans le cadre du programme de l'Enseignement Technique 2003, et en collaboration avec le GUAPI (Groupe des Utilisateurs d'Automates Programmables Industriels du CERN), une nouvelle formation a été organisée afin de perfectionner les connaissances sur l'outil PL7 de programmation des Automates PREMIUM de Schneider. Ce nouveau cours (niveau 2) s'adresse aux person...

  16. Technical training: AXEL-2008 - Introduction to Particle Accelerators

    CERN Multimedia

    2008-01-01

    CERN Technical Training 2008: Learning for the LHC! AXEL-2008 is a course series on particle accelerators, given at CERN within the framework of the AB Operation Group Shut-down Lectures. Since 2003, this course has been organized as a joint venture between the AB Department and Technical Training and is open to a wider CERN community. The AXEL-2008 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is also open to technicians, engineers and physicists interested in this field. The course does not require any prior knowledge of accelerators. However, some basic knowledge of trigonometry, matrices and differential equations and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) from 29th January to 1st February 2008, and given in English with questions and answers als...

  17. Technical Training: Places available

    CERN Multimedia

    DAvide Vitè

    2006-01-01

    Places available as of 25.7.2006 (August-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F EXCEL 2003 - niveau 1 : ECDL 16 30-31.08.06 F OUTLOOK 2003 (Short Course I) - E-mail 3 1.09.06 E/F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 1.09.06 E/F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F ANSYS Workbench 32 12-15.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E WORD 2003 (Short Course III) - HowTo... Work with long documents 3 15.09.06 E/F EXCEL 2003 (Short Course I) - HowTo... Wor...

  18. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 11.7.2006 (July-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue Design Patterns 16 25-26.07.06 E CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F CERN EDMS – Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 4-6.09.06 E ANSYS Workbench 32 12-15.09.06 F AutoCAD Mechanical 2006 16 12-13.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E LabVIEW: Working efficiently with LabWIEW 8 8 18.09.06 E PCAD Schémas ? Introduction 16 21-22.09.06 F PCAD PCB - Introduction  24 27-29.09.06 F C++ for Particle Physicists ...

  19. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 27.6.2006 (July-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue Manipulation des images 4 6.07.06 F Introduction to Databases and Database Design 16 11-12.07.06 E ACCESS 2003 - Level 1: ECDL 16 13-14.07.06 E-F Design Patterns 16 25-26.07.06 E CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 4-6.09.06 E ANSYS Workbench 32 12-15.09.06 F AutoCAD Mechanical 2006 16 12-13.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E AutoCAD 2006 - niveau 1 32 14-21.09.06 F LabVIEW Basics 2 ...

  20. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 19.7.2006 (August-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F OUTLOOK 2003 (Short Course I) - E-mail 3 1.09.06 E/F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 1.09.06 E/F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 11-13.09.06 E ANSYS Workbench 32 12-15.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E EXCEL 2003 (Short Course I) - HowTo... Work with formulae 3 15.09.06 E/F WORD 2003 (Short Course III) - HowTo... Work with long docu...

  1. Technical Training: EMAG-2005 - Electromagnetic Design and Mathematical Optimization Methods in Magnet Technology

    CERN Multimedia

    Monique Duval

    2005-01-01

    CERN Technical Training 2005: Learning for the LHC! CERN Technical Training, in collaboration with the AT-MEL-EM section, is organising a new course series in the framework of the 2005 CERN Technical Training programme: EMAG-2005 - Electromagnetic Design and Mathematical Optimization Methods in Magnet Technology, composed of three-hour lectures in the morning and topical seminars in the afternoon. The EMAG-2005 course series will run at CERN from Monday April 4 until Thursday April 14 (no lectures on Friday 8). The course series, in English, will focus on the foundations of electromagnetism and the design of accelerator magnets, both normal conducting and superconducting, employing analytical and numerical field computations. Examples of the LHC magnet design using the CERN field computation program ROXIE will be presented. However, EMAG-2005 is not a ROXIE user course: it is rather a course for users or potential users of numerical field computation software, and for magnet designers. The course will be o...

  2. Technical training: places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Introduction to the CERN EDMS: 2.11.2005 (1 day, free of charge) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) The CERN EDMS for Engineers: 8.11.2005 (1 day, free of charge) The EDMS-MTF in practice: 9.11.2005 (morning, free of charge) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Hands-On Object Oriented Design and Programming with C++ : 16 - 18.11.2005 (3 days) The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) Hands-on Introduction to Python Prog...

  3. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) Finite State Machines in the JCOP Framework : 25 - 27.10.2005 (3 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) Introduction to the CERN EDMS: 2.11.2005 (1 day, free of charge) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) The CERN EDMS for Engineers: 8.11.2005 (1 day, free of charge) The EDMS-MTF in practice: 9.11.2005 (morning, free of charge) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: ...

  4. CERN Academic Training Programme 2008/2009

    CERN Multimedia

    HR Department

    2009-01-01

    LECTURE SERIES 23, 24 , 25 February 2009 11:00-12:00 - Main Auditorium, Bldg. 500-1-001 String Theory for Pedestrians Prof. Constantin Bachas / École normale supérieure, Paris, France This is a rapid non-technical course on string theory. Lecture 1 is an introduction to the basics of the subject: classical and quantum strings, D(irichlet) branes and string-string dualities. In lecture 2 I will discuss string unification of the fundamental forces, covering both its successes and failures. Finally in lecture 3 I will review string models of black hole microstates, the holographic gauge/gravity duality and, if time permits, potential applications to the physics of the strong interactions.. 5-6 March 2009 Thursday, 5 March 2009: 11:00-12:00, 14:00-15:00, Main Auditorium, Bldg. 500-1-001. Friday, 6 March 2009: 10:00-12:00, Main Auditorium, Bldg. 500-1-001 Recent developments at 3rd generation storage ring light sources Jean-Marc FILHOL, Deputy Director-General SOLEIL, France Over the last decade, many 3rd ge...

  5. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) The EDMS MTF in practice : 4.10.2004 (afternoon) The CERN EDMS for Engineers : 6.10.2004 (1 day) FrontPage 2003 - niveau 1 : 7 & 8.10.04 (2 jours) Hands-On Object Oriented Design and Programming with C++ : 9 - 12.11.2004 (3 days) FileMaker - niveau 1 : 18 & 19.10.2004 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Outlook (Short Course III) : Meetings and Delegation : 9.11...

  6. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: ANSYS : Thermal Analysis : 22 - 24.9.2004 (3 days) LabVIEW Migration 6 à 7 : 23.9.2004 (one day) ANSYS : Advanced Topics : 27.9 - 1.10.2004 (5 days) Word 2003 - niveau 2 : 27 & 28.9.2004 (2 jours) LabVIEW - Basics 1 : 27 - 29.9.2004 (3 days) LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) The EDMS MTF in practice : 4.10.2004 (afternoon) The CERN EDMS for Engineers : 6.10.2004 (1 day) FrontPage 2003 - niveau 1 : 7 & 8.10.04 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Instructor-led WTechT Study or Fo...

  7. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Introduction à ANSYS : 23 - 26.11.2004 (4 jours) FileMaker - niveau 1 : 23 - 26.11.2004 (4 jours) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) Explicit Dynamics with ANSYS/LS-Dyna : 7 - 9.12.2004 (3 days) Introduction to PERL 5 : 8 & 9.12.2004 (2 days) PCAD Schémas - Débutants : 9 & 10.12.2004 (2 jours) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) Introduction to the CERN EDMS : 18.1.2005 (1 day - free course) The CERN EDMS for Local Administrators : 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) CLEAN-2002 : Travaill...

  8. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: FileMaker - niveau 1 : 23 - 26.11.2004 (4 jours) Explicit Dynamics with ANSYS/LS-Dyna : 7 - 9.12.2004 (3 days) Introduction to PERL 5 : 8 & 9.12.2004 (2 days) PCAD Schémas - Débutants : 9 & 10.12.2004 (2 jours) Advanced aspects of PERL 5: 10.12.2004 (1 day) PCAD PCB – Débutants : 13 - 15.12.2004 (3 jours) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) Introduction to the CERN EDMS : 18.1.2005 (1 day - free course) The CERN EDMS for Local Administrators : 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) CLEAN-2002 : Travailler en salle propre : 25.1.2005 ...

  9. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Explicit Dynamics with ANSYS/LS-Dyna : 7 - 9.12.2004 (3 days) Introduction to PERL 5 : 8 & 9.12.2004 (2 days) PCAD Schémas - Débutants : 9 & 10.12.2004 (2 jours) Advanced aspects of PERL 5: 10.12.2004 (1 day) PCAD PCB – Débutants : 13 - 15.12.2004 (3 jours) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) Introduction to the CERN EDMS : 18.1.2005 (1 day - free course) The CERN EDMS for Local Administrators : 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) CLEAN-2002 : Travailler en salle propre : 25.1.2005 (après-midi, cours gratuit) Compatibilit&eac...

  10. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) ELEC-2005 Autumn Term - Electronics applications in HEP experiments: 8.11 - 8.12.2005 (10 x 2h lectures) The EDMS-MTF in practice: 9.11.2005 (morning, free of charge) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Hands-On Object Oriented Design and Programming with C++ : 16 - 18.11.2005 (3 days) The CERN EDMS for Engineers: 17.11.2005 (1 day, free of charge) The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) Hands-on Introduction to Python Programming: 28 - 30.11.2005 (3 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : 30.11.2005 (afternoon) Fron...

  11. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: ELEC-2005 Autumn Term - Electronics applications in HEP experiments: 8.11 - 8.12.2005 (10 x 2h lectures) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Hands-On Object Oriented Design and Programming with C++ : 16 - 18.11.2005 (3 days) The CERN EDMS for Engineers: 17.11.2005 (1 day, free of charge) The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) Hands-on Introduction to Python Programming: 28 - 30.11.2005 (3 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : 30.11.2005 (afternoon) FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) LabVIEW Application Development (Intermediate 1): 5 - 7.12.2005 (3 d...

  12. TECHNICAL TRAINING SEMINAR: National Instruments

    CERN Multimedia

    Monique Duval

    2004-01-01

    From 9:30 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Data acquisition systems on PCs, industrial measurement and control techniques, advanced LabVIEW software and PXI instrumentation, and system components for tests and automation will be presented. Walk-in courses will address DIAdem, LabVIEW and data acquisition. Language: English and French Free seminars and courses, no registration Organisers: Rolf Stampfli / IT-CO / 78102 & 160367 / Rolf.Stampfli@cern.ch Davide Vitè / HR-PMD-ATT / 75141 Davide.Vite@cern.ch For more information and the complete event programme, please visit the...

  13. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1: 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) ELEC-2005.:Winter term: Introduction to electronics in HEP: 18, 20, 25, 27.1, 1 & 3.2.2005 (6 x 2h lectures) The CERN EDMS for Local Administrators: 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) CLEAN-2002 : Travailler en salle propre : 25.1.2005 (après-midi, cours gratuit) Compatibilité électromagnétique (CEM) : installation et remèdes : 25 - 27.1.2005 (3 jours) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9...

  14. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: The CERN EDMS for Local Administrators: 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (9 demi-journées) LabVIEW base 1/basics 1 : 31.1 - 2.2.2005 (3 jours/3 days - langue à décider/language to be decided) LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) C++ Programming Advanced -Traps and Pitfalls: 8 - 11.2.2005 (4 days) Joint PVSS JCOP Framework: 14 - 18.2.2005 (5 days) JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) ELEC-2005 â...

  15. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1: 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) The CERN EDMS for Local Administrators: 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) LabVIEW base 1/basics 1 : 31.1 - 1.2.2005 (2 j size="2">LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) C++ Programming Advanced -Traps and Pitfalls: 8 - 11.2.2005 (4 days) Joint PVSS JCOP Framework: 14 - 18.2.2005 (5 days) JAVA 2 Enterprise Edition - Part 1: ...

  16. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 7.2.2006 (February-May course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language WORD 2003 (Short Course II) - HowTo... Mail merge 3 09-02-06 E-F ACCESS 2003 - Level 1: ECDL M5 16 13 to 14-02-06 E-F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 16-02-06 E-F WORD 2003 (Short Course III) - HowTo... Work with long documents 3 16-02-06 E-F CERN EDMS - Introduction 8 21.02.06 E OUTLOOK 2003 (Short Course III) - Meetings and Delegation 3 27-02-06 E-F WORD 2003 (Short Course IV) - HowTo... Work with master document 3 27-02-06 E-F JAVA: Level 2 32 28-02-06 to 03-03-06 E Manipulation des images 4 28.02.06 F ACCESS 2003 - Level 2: ECDL AM5 16 02 to 03-03-06 E-F FrontPage 2003 - niveau 2 16 02 to 03-03-06 F C++ for Particle Physicists 20 06 to 10-03-06 E FileMaker - niv...

  17. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) MAGNE-05 - Magn&...

  18. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The CERN EDMS for Engineers : 6.10.2004 (1 day) FileMaker - niveau 1 : 18 & 19.10.2004 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions...

  19. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT Study or Follow-up for Microsoft Applications : 7.9.2004 7.9.2004 Outlook (short course III) : Meetings and Delegation : 7.9.2004 (2 hours, afternoon) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) Joint PVSS JCOP Framework : 13 - 17.9.2004 (5 days) Programmation STEP7 niveau 1 : 14-17.9.2004 (4 jours) ANSYS : Thermal Analysis : 22 - 24.9.2004 (3 days) LabVIEW Migration 6 à 7 : 23.9.2004 (one day) ANSYS : Advanced Topics : 27.9 - 1.10.2004 (5 days) Word 2003 - niveau 2 : 27 & 28.9.2004 (2 jours) LabVIEW - Basics 1 : 27 - 29.9.2004 (3 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 28 - 30.9.2004 (3 jours) LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) ...

  20. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) Introduction à Dreamweaver MX :  3 - 4.10.2005 (2 jours) Utilisation des fichiers PDF avec Acrobat 7.0 :   4.10.2005 (1 journée) LaTeX par la pratique :   4 - 6.10.2005 (3 matinées) PowerPoint 2003 (F) :  7.10.2005 (1 journée) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with Auto...

  1. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1:  5 - 7.9.2005 (3 days) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2...

  2. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW base 1 : 5 - 7.9.2005 (3 jours) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechniq...

  3. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1:  5 â€" 7.9.2005 (3 days) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) OU...

  4. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framew...

  5. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 9.5.2006 (May-October course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: find out the curren Hours Date Language LabVIEW Application Development 24 15-17.05.06 E LabVIEW Advanced Programming 16 18-19.05.06 E PERL 5: Advanced Aspects 8 18.05.06 E Technique du vide 16 18-19.05.06 F FileMaker - niveau 2 16 11-12.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 F Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE 16 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls 32 30.05-2.06.06 E Python: Hands-on Introduction 24 7-9.06.06 E AutoCAD Mechanical 2006 16 13-14.06.06 F CERN EDMS for Local Administrators 16 13-14.06.06...

  6. Technical Training: ELEC-2005: Electronics in High Energy Physics

    CERN Multimedia

    Monique Duval

    2005-01-01

    CERN Technical Training 2005: Learning for the LHC! ELEC-2005: Electronics in High Energy Physics - Spring Term ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the successful ELEC-2002 course series. This comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2005 is composed of four Terms: the Winter Term, Introduction to electronics in HEP, already took place; the next three Terms will run throughout the year: Spring Term: Integrated circuits and VLSI technology for physics (March, 6 lectures) - now open for registration Summer Term: System electronics for physics: Issues (May, 7 lectures) Autumn Term: Ele...

  7. Technical training: AXEL-2011 - Introduction to Particle Accelerators

    CERN Multimedia

    HR Department

    2010-01-01

    CERN Technical Training 2011: Learning for the LHC! AXEL-2011 is a course series on particle accelerators, given at CERN within the framework of the 2011 Technical Training Program. As part of the BE Department’s Operation Group Shutdown Lecture series, the general accelerator physics module has been organized since 2003 as a joint venture between the BE Department and Technical Training, and is open to a wider CERN community. The AXEL-2011 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is also open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge of accelerators. However, some basic knowledge of trigonometry, matrices and differential equations, and some basic knowledge of magnetism would be an advantage. The series will be composed of 10 one-hour courses (Monday 10.01.2011 – Fri 14.01.2011, from 09:00 to 10:30 and from 14:00 to 15:...

  8. Technical training: AXEL-2006 - Introduction to Particle Accelerators

    CERN Document Server

    Davide Vitè

    2006-01-01

    CERN Technical Training 2006: Learning for the LHC! AXEL-2006 is a course series on particle accelerators, given at CERN within the framework of the 2006 Technical Training Programme. Known in the past as the PS Complex Operation Course (or the 'PS Shutdown Course'), the general accelerator physics module is organised since 2003 as a joint venture between the AB department and Technical Training, and is open to a wider CERN community. The AXEL-2006 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) during the week 6-10 February March 2006, and given in English...

  9. Technical training: AXEL-2009 - Introduction to Particle Accelerators

    CERN Multimedia

    HR Department

    2008-01-01

    CERN Technical Training 2009: Learning for the LHC! AXEL-2009 is a course series on particle accelerators, given at CERN within the framework of the 2009 Technical Training Program. Known in the past as the PS Complex Operation Course (or the ‘PS Shutdown Course’), the general accelerator physics module is organized since 2003 as a joint venture between the AB department and Technical Training, and is open to a wider CERN community. The AXEL-2009 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) from the 19th – 23rd of January 2009, and given in English with...

  10. Technical training: AXEL-2010 - Introduction to particle accelerators

    CERN Multimedia

    HR Department

    2010-01-01

    CERN Technical Training 2010: Learning for the LHC! AXEL-2010 is a course series on particle accelerators, given at CERN within the framework of the 2010 Technical Training Program. Known in the past as the PS Complex Operation Course (or the ‘PS Shutdown Course’), the general accelerator physics module is organized since 2003 as a joint venture between the BE department and Technical Training, and is open to a wider CERN community. The AXEL-2010 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) from the 1st – 5th of February 201...

  11. Technical training: AXEL-2009 - Introduction to Particle Accelerators

    CERN Multimedia

    HR Department

    2009-01-01

    CERN Technical Training 2009: Learning for the LHC! AXEL-2009 is a course series on particle accelerators, given at CERN within the framework of the 2009 Technical Training Program. Known in the past as the PS Complex Operation Course (or the ‘PS Shutdown Course’), the general accelerator physics module as been organized since 2003 as a joint venture between the AB Department and Technical Training Service, and is open to a wider CERN community. The AXEL-2009 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is also open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge of accelerators. However, some basic knowledge of trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) from 19 to 23 January 2009, and will be given i...

  12. Technical Training: AXEL-2005: Introduction to Particle Accelerators

    CERN Multimedia

    Monique Duval

    2005-01-01

    CERN Technical Training 2005: Learning for the LHC! AXEL-2005 is a course series on particle accelerators, given at CERN within the framework of the 2005 Technical Training Programme. Known in the past as the PS Complex Operation Course (or the 'PS Shutdown Course', now AB/OP), the general accelerator physics section is organised since 2003 as a joint venture between the AB department and Technical Training, and is open to a wider CERN community. The AXEL-2005 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) during the week 14-18 March 2005, given in Fr...

  13. Technical Training: AXEL-2005 - Introduction to Particle Accelerators

    CERN Multimedia

    Monique Duval

    2005-01-01

    CERN Technical Training 2005: Learning for the LHC! AXEL-2005 is a course series on particle accelerators, given at CERN within the framework of the 2005 Technical Training Programme. Known in the past as the PS Complex Operation Course (or the 'PS Shutdown Course', now AB/OP), the general accelerator physics section is organised since 2003 as a joint venture between the AB department and Technical Training, and is open to a wider CERN community. The AXEL-2005 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course will be given in French on course supports in English; questions and answers possible in both languages. AXEL-2005 - I...

  14. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Wednesday 19 November From 9:30 to 17:30 - IT Amphitheatre bldg.31 3-004 2003 Data Transmission Design Seminar - TEXAS INSTRUMENTS The one-day 2003 Data Transmission Design Seminar is part of a series of technical seminars produced by Texas Instruments. This series of seminars will introduce system solutions based on different standards according to their respective requirements. It will include topics containing a blend of basic principles and hands-on application examples, along with layout-guidelines. • Basics and Practical Examples of Data-Transmission • Low Voltage Differential Signaling (LVDS) • Connectivity and PC-based Links • Industrial Interfaces • Parallel Bus Systems and Clock-Distribution-Circuits (CDC) This Seminar will be of interest to hardware designers and system engineers dealing with the realization of system- or board-level interfaces based on various transmission standards. Language: English Free seminar, no registration Organiser: John ...

  15. Training Manuals and Technical Publications.

    Science.gov (United States)

    Army Test and Evaluation Command, Aberdeen Proving Ground, MD.

    The objective of the Materiel Test Procedure is to describe methods for determining the need for adequacy of comprehensiveness, and clarity of training manuals and technical publications (or other pertinent types of literature) relating to the ammunition or ammunition components being tested. (Author)

  16. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 22 May From 14:00 to 17:00 - Training Centre Auditorium - bldg. 593, room 11 Reliability, Availability, Maintainability and Safety (RAMS) Philippe Galley, Vincent Brindejonc / LIGERON S.A., Saint Aubin, France This seminar will address Reliability, Availability, Maintainability and Safety (RAMS) engineering concepts to guarantee availability and safety of critical equipments, in particular in a high technology and R&D environment. Applications of these concepts will be presented. 14h00-14h30 Introduction to Reliability, Availability, Maintainability and Safety activities: general introduction to RAMS, basic definitions, integration of RAMS in a large project. 14h40-16h10 RAMS methodologies: Functional Analysis methodologies Preliminary Hazard Analysis Failure Mode Effects and Criticality Analysis (FMECA) Fault Tree Analysis Use of standards for Reliability predictions Reliability Block Diagrams for a system Advanced models, e.g. Markov's Graphs 16h30-17h00 Presentation of the activ...

  17. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 1 : 9 & 10.5.2005 (2 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2005 - niveau 1 : 12, 13, 18, 19.5.2005 (4 jours) ACCESS 2003 - Level 1: ECDL M5 : 11 & 12.5.2005 (2 days) Object-Oriented Analysis and Design using UML: 17 - 19.5.2005 (3 days) Synplify Pro Training: 18.5.2005 (1 day) Finite State Machines in the JCOP Framework: 24 - 26.5.2005 (3 days) The Joint PVSS JCOP Framework: 30.5 - 3.6.2005 (5 days) Introduction à la CAO CADENCE : 31.5 - 1.6.2005 (2 jours) LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Intr...

  18. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 1 : 9 & 10.5.2005 (2 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2005 - niveau 1 : 11, 12, 18, 19.5.2005 (4 jours) Object-Oriented Analysis and Design using UML: 17 - 19.5.2005 (3 days) Synplify Pro Training: 18.5.2005 (1 day) Finite State Machines in the JCOP Framework: 24 - 26.5.2005 (3 days) The Joint PVSS JCOP Framework: 30.5 - 3.6.2005 (5 days) Introduction à la CAO CADENCE : 31.5 - 1.6.2005 (2 jours) LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introductio...

  19. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    2004-01-01

    Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrate unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). • 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) • 10:30 - 10:45 coffee • 10:45 - 13:00 (second part)...

  20. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    2004-01-01

    Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrate unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). • 09:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) • 10:30 - 10:45 coffee • 10:45 - 13:00 (second part)...

  1. TECHNICAL TRAINING SPECIAL SEMINAR

    CERN Multimedia

    Technical Training; Tel.74924

    2001-01-01

    Wednesday 21 November From 9:00 hrs - Training Centre Auditorium room 11, bldg. 593 Linear Design Seminar James Bryant, Eberhard Brunner / ANALOG DEVICES Munich James Bryant, one of the well-known Analog Devices speakers, will present the reasons to use components based on new design processes. Among industrial and high speed applications, a particular focus will be given to single supply and low voltage applications. Eberhard Brunner is the specialist of RF products by Analog Devices. After several years in the US in the component design sector for these products, he will give a tutorial for communication and wireless, and applications based on high speed linear components. 09.00-10.15 Low voltage processes and high precision design techniques; AC and DC signal handling with low voltage and high speed products. 10.30-12.15 How to optimise high speed single supply applications; Single supply products in precision applications; Digital isolation, decoupling and grounding in high speed applications. 13.30-15.15...

  2. Open Access progress at CERN: technical implementation [OA Progress at CERN, Switzerland

    OpenAIRE

    Pepe, Alberto

    2005-01-01

    CERN has pursued open dissemination of scientific results since its early beginnings. CERN Document Server (CDS) today offers access to over 750,000 bibliographic records, including 320,000 fulltext documents, of interest to people working in particle physics and related areas. Covers preprints, articles, books, journals, photographs, and much more. Speech made at the conference session 'Reports from delegates on implementing the Berlin Declaration in their organisations'.

  3. Technical Training seminar: Texas Instruments

    CERN Multimedia

    2006-01-01

    Monday 6 November TECHNICAL TRAINING SEMINAR 14:00 to 17:30 - Training Centre Auditorium (bldg. 593) Texas Instruments Technical Seminar Michael Scholtholt, Field Application Engineer / TEXAS INSTRUMENTS (US, D, CH) POWER - A short approach to Texas Instruments power products Voltage mode vs. current mode control Differentiating DC/DC converters by analyzing control and compensation schemes: line / load regulation, transient response, BOM, board space, ease-of-use Introduction to the SWIFT software FPGA + CPLD power solutions WIRELESS / CHIPCON Decision criteria when choosing a RF platform Introduction to Texas Instruments wireless products: standardized platforms proprietary platforms ( 2.4 GHz / sub 1 GHz) development tools Antenna design: example for 2.4 GHz questions, discussion Industrial partners: Robert Medioni, François Caloz / Spoerle Electronic, CH-1440 Montagny (VD), Switzerland Phone: +41 24 447 0137, email: RMedioni@spoerle.com, http://www.spoerle.com Language: English. Free s...

  4. Technical training: AXEL-2008 - Introduction to Particle Accelerators

    CERN Multimedia

    2008-01-01

    CERN Technical Training 2008: Learning for the LHC! AXEL-2008 is a course series on particle accelerators, given at CERN within the framework of the AB Operation Group Shut-down Lectures. Since 2003, this course is organized as a joint venture between the AB department and Technical Training, and is open to a wider CERN community. The AXEL-2008 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to technicians, engineers, and physicists interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course series will be composed of 10 one-hour lectures (mornings and afternoons) from the 29th of January to the 1st February 2008, and given in English with questions and answers also possible in French. The lecturer is Rende Steerenberg, engineer and sup...

  5. Cern

    CERN Multimedia

    2009-01-01

    "La réparation de l'accélérateur géant de particules LHC, qui devrait redémarrer mi-novembre aprés une panne de plus d'un an, a coûté 23 millions d'euros, selon un haut responsable du Centre européen de recherche nucléaire (CERN), cité vendredi par les médias espagnols" (1 paragraph)

  6. Academic training: Fusion ITER at CERN in 2011

    CERN Multimedia

    PH Department

    2011-01-01

    Regular lecture 12, 13, 14 & 15 April 2011 from 11:00 to 12:00 (Europe/Zurich) at CERN ( 222-R-001 - Filtration Plant ) Fusion ITER at CERN in 2011 David Campbell and Guenter Janeschitz / ITER Organization, France  

  7. CERN Technical Training 2003: Learning for the LHC! MAGNE-03 : Magnétisme pour l'Electrotechnique Phénomènes magnétiques, matériaux et applications - French version only

    CERN Multimedia

    2003-01-01

    MAGNE-03 est un nouveau cours dans le cadre du programme de l'Enseignement Technique 2003, qui s'adresse aux personnes souhaitant découvrir, améliorer ou remettre à niveau leurs connaissances en magnétisme. Recommandé par l'ancienne division LHC, le cours est donné au CERN par la société CEDRAT Technologies basée à Meylan (France, 38). La participation est ouverte à l'ensemble du personnel technique et scientifique nécessitant une formation en magnétisme dans le cadre de leurs activités professionnelles, courantes ou futures. En ayant organisé des sessions au CERN, une économie d'environ 800.- CHF par participant est réalisée par rapport aux frais nécessaires pour suivre la même formation sur leur site en Isère. MAGNE-03 s'intéresse, entre autres, au développement de la compréhension des phénomènes magnétiques et le "sens physique" appliqués à des produits industriels. Programme : Notions de base en électromagnétisme. Les aspects électrique et mécanique du magnétisme. Les ...

  8. CERN Technical Training 2003: Learning for the LHC! MAGNE-03 : Magnétisme pour l'Electrotechnique
    Phénomènes magnétiques, matériaux et applications. - French version only

    CERN Multimedia

    2003-01-01

    MAGNE-03 est un nouveau cours dans le cadre du programme de l'Enseignement Technique 2003, qui s'adresse aux personnes souhaitant découvrir, améliorer ou remettre à niveau leurs connaissances en magnétisme. Recommandé par l'ancienne division LHC, le cours est donné au CERN par la société CEDRAT Technologies basée à Meylan (France, 38). La participation est ouverte à l'ensemble du personnel technique et scientifique nécessitant une formation en magnétisme dans le cadre de leurs activités professionnelles, courantes ou futures. En ayant organisé des sessions au CERN, une économie d'environ 800.- CHF par participant est réalisée par rapport aux frais nécessaires pour suivre la même formation sur leur site en Isère. MAGNE-03 s'intéresse, entre autres, au développement de la compréhension des phénomènes magnétiques et le "sens physique" appliqués à des produits industriels. Programme : Notions de base en électromagnétisme. Les aspects électrique et mécanique du magnétisme. Les ...

  9. Grab Windows training opportunities; check CERN Windows roadmap!

    CERN Multimedia

    IT Department

    2011-01-01

    CERN Operating Systems and Information Services group (IT-OIS) actively monitors market trends to check how new software products correspond to CERN needs. In the Windows world, Windows 7 has been a big hit, with over 1500 Windows 7 PCs within less than a year since its support was introduced at CERN. No wonder: Windows XP is nearly 10 years old and is steadily approaching the end of its life-cycle. At CERN, support for Windows XP will stop at the end of December 2012. Compared to Vista, Windows 7 has the same basic hardware requirements, but offers higher performance, so the decision to upgrade is rather straightforward. CERN support for Vista will end in June 2011. In the world of Microsoft Office, version 2007 offers better integration with the central services than the older version 2003. Progressive upgrade from 2003 to 2007 is planned to finish in September 2011, but users are encouraged to pro-actively upgrade at their convenience. Please note that Office 2007 brings an important change in the area of ...

  10. Consolidation on civil engineering and technical infrastructure at CERN from now to 2010

    CERN Document Server

    Alves, P; Pepinster, P; CERN. Geneva. ST Division

    2003-01-01

    The age of the civil engineering structure (office buildings, halls) and of tertiary technical equipment (mainly HVAC and electricity) at CERN is such that their renovation must be considered in the near future. Due to the large number of buildings and equipment in these conditions, and the restricted budget available, it is extremely important to define priorities. The aim of this note is to give the picture of the current conditions and the related problems, based on the backlog of CERN database (MP5) and confronting it with the inventory made at CERN by an external company. After having identified the most frequent problems and repairs to carry out, a planning for intervention is therefore presented optimizing the safety aspects, maintenance costs and comfort for the users. The timescale of this intervention is related to the money that will be available in the coming years.

  11. Technical Developments on Reduced $\\beta$ Superconducting Cavities at CERN

    CERN Document Server

    Aberle, O; Calatroni, Sergio; Chiaveri, Enrico; Häbel, E; Hanni, R; Losito, R; Marque, S; Tückmantel, Joachim

    1999-01-01

    Several authors proposed the construction of superconducting proton linacs using the LEP2 cavities once LEP will be decommissioned. However only a fraction (about half) of these cavities can be used as they are for the high-energy part (b~1) of such a linac, the low energy part requiring the development of accelerating structures optimized for lower values of the particle velocity. At CERN an R&D programme on reduced-b single-cell cavities started in 1996 in order to study and explore the limits of the technology successfully used for the production of LEP2 cavities (copper cavities niobium-plated using the magnetron sputtering technique). Four different geometries were extensively investigated, each representing part of a multicell structure optimized for particles having b=0.48, b=0.625, b=0.66 and b=0.8 respectively. The results were encouraging for the last two types and therefore a new phase of R&D aimed at the production of multicell cavities for b=0.66 and b=0.8 was started. The goal is to demo...

  12. Year-end technical stop: train to work safely

    CERN Multimedia

    Rosaria Marraffino

    2016-01-01

    As mentioned in the previous issue of the Bulletin (see here), the accelerators are currently undergoing maintenance as part of the year-end technical stop (YETS). Hundreds of people are working simultaneously on different machines, and many of them need to be trained in order to work safely underground. From a Safety Training point of view, this has resulted in a significant increase in training requests, most of them at the last minute, which are now being handled – but not without difficulties.     In the LHC mock-up, a helium leak is simulated. In this stressful situation, the trainees learn how to put their mask on in less than 40 seconds.   "The most requested course is the Self-Rescue Mask classroom training,” explains Christoph Balle, Safety Training Section Leader. “In this course, people are trained to face the oxygen deficiency hazards that may occur in CERN's underground areas, learning...

  13. TECHNICAL TRAINING SEMINAR - French version only

    CERN Multimedia

    2003-01-01

    Lundi 19 mai From 9:30 - 11:30 hrs - Training Centre Auditorium bât. 593, salle 11 PIPES 2003 - Introduction aux nouvelles méthodes de tuyauterie Michel Bosteels / CERN-ST-CV Depuis quelques années l'apparition de nouvelles méthodes de tuyauterie a changé radicalement leur conception, tant pour les applications industrielles que domestiques. Les utilisations au CERN concernent pratiquement tous les fluides, c'est-à-dire eau sanitaire, eau déminéralisée, air comprimé, fluorocarbones liquides ou gazeux, et tous les gaz, depuis l'hélium jusqu'au xénon. Ce séminaire de l'Enseignement Technique est adressé aux concepteurs et aux techniciens utilisant des tuyauteries de 2 mm jusqu'à 60 mm de diamètre: présentation des nouvelles techniques d'assemblage par sertissage sans soudure avec tubes en cuivre, inox et aluminium; applications, choix des raccords et calcul des diamètres pour tubes multicouches; utilisation du catalogue du magasin CERN. Langue: Français Séminaire libre, sans inscriptio...

  14. TECHNICAL TRAINING SEMINAR - French version only

    CERN Multimedia

    2003-01-01

    Lundi 19 mai From 9:30 - 11:30 hrs - Training Centre Auditorium bât. 593, salle 11 PIPES 2003 - Introduction aux nouvelles méthodes de tuyauterie Michel Bosteels / CERN-ST-CV Depuis quelques années l'apparition de nouvelles méthodes de tuyauterie a changé radicalement leur conception, tant pour les applications industrielles que domestiques. Les utilisations au CERN concernent pratiquement tous les fluides, c'est-à-dire eau sanitaire, eau déminéralisée, air comprimé, fluorocarbones liquides ou gazeux, et tous les gaz, depuis l'hélium jusqu'au xénon. Ce séminaire de l'Enseignement Technique est adressé aux concepteurs et aux techniciens utilisant des tuyauteries de 2 mm jusqu'à 60 mm de diamètre : présentation des nouvelles techniques d'assemblage par sertissage sans soudure avec tubes en cuivre, inox et aluminium ; applications, choix des raccords et calcul des diamètres pour tubes multicouches ; utilisation du catalogue du magasin CERN. Langue : Français Séminaire libre, sans inscr...

  15. CERN's Technician Training Experience notches up another success!

    CERN Multimedia

    Stephanie Hills

    2015-01-01

    The programme was set up almost three years ago to help address a Europe-wide shortage of highly skilled technicians, with the participants gaining valuable skills and experience in an international environment. It’s clear that the programme works: some of the technician fellows who have taken part are being snapped up by major science projects and the high-tech industry.   Going underground: Fay Chicken at work in ATLAS. Fay Chicken (see UK news from CERN 59) has just accepted a job offer from the European Spallation Source in Sweden, where she will be working in the detector development team: “I’m also going to be setting up a new workshop where prototype detectors will be built. When I went to Lund, I was shown a big, empty room – it’s up to me to equip it!” This level of responsibility is a big step up for Fay, but there is no doubt that her time at CERN has both built her confidence to take on the role, and convinced ESS th...

  16. Technical training: Comprehensive VHDL for FPGA Design' and 'Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE' course sessions, May-June 2006

    CERN Multimedia

    Davide Vitè

    2006-01-01

    The next session of the course 'Comprehensive VHDL for FPGA Design'given in English by Doulos Ltd (UK) will take place at CERN from May 29 through June 2nd (5 days), for a maximum of 14 participants. It will be preceded by an optional, refresher session of the two-day course 'Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE', given on 23-24 May, in French, by Serge Brobecker of IT/DES. For more information, please visit the Technical Training CTA website, http://cta.cern.ch/cta2/f?p=300, to consult the detailed course descriptions and to apply via EDH. Organiser: Davide Vitè / HR-PMD / 75141 Davide.Vite@cern.ch ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING technical.training@cern.ch

  17. Technical Training: ELEC-2005 - Electronics in High Energy Physics

    CERN Multimedia

    Monique Duval

    2005-01-01

    Learning for the LHC! ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the successful ELEC-2002 course series. This comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2005 is composed of four Terms that will run throughout the year: Winter Term: Introduction to electronics in HEP (January-February, 6 lectures) Spring Term: Integrated circuits and VLSI technology for physics (March, 6 lectures) Summer Term: System electronics for physics: Issues (May, 7 lectures) Autumn Term: Electronics applications in HEP experiments (November-December, 10 lectures) Lectures within each Term will take place on Tuesdays an...

  18. Preliminary results on μ-e+ events from the CERN wide-band beam technical run

    International Nuclear Information System (INIS)

    During the first technical run of the CERN wide-band neutrino beam, BEBC was operated with a 74 mole-% neon-hydrogen filling under conditions giving thin high density tracks to minimise confusion at interaction vertices. 19 μ-e+ events (including an estimated background of approximately 2 asymmetric Dalitz pairs) have been found in 5,600 +- 400 charged current neutrino interactions, corresponding to a μ-e+/μ- ratio of (0.5 +- 0.2)%. 5 of the 19 events contain vee-zeroes from the primary vertex. (orig.)

  19. Towards a common monitoring system for the accelerator and technical control rooms at CERN

    CERN Document Server

    Arduini, Gianluigi; Bätz, M; Carron de la Morinais, J M; Manglunki, Django; Priestnall, K; Robin, G; Ruette, M; Sollander, P

    2000-01-01

    The communication and coordination between the CERN accelerator and technical control rooms will be a critical issue for an efficient operation of the LHC and its injectors, which are expected to provide also beams for fixed target experiments, for detector component tests and for other activities including machine development. Early detection of faults in the accelerator and technical infrastructure (electricity, cooling, etc.) and their possible consequences on operation are useful not only to prevent major breakdowns but also to recover from them and to reschedule efficiently machine operation to satisfy the overall beam time requests from the different and concurrent users. To meet these requirements a method to define and provide common monitoring tools for all the actors involved in machine operation has been established. This method has been applied to the SPS accelerator and is being implemented in the PS complex and in the SPS experimental areas.

  20. Technical Training: New Course on Microsoft Access 2003 - ECDL Module 5

    CERN Multimedia

    Monique Duval

    2005-01-01

    CERN Technical Training 2005: Learning for the LHC! The CERN Technical Training programme is now proposing a new course on Microsoft Access 2003, designed for people using Access to work with databases. The course programme will include the description of the objects of an Access database, and how to work with Access, creating and using queries, tables, forms and reports. After this course, participants will be at the level of the ECDL Certificate, Database Module 5. Optionally, it will be possible to stand the ECDL examination at the CERN Training Centre. The first scheduled session of this two-day course on Microsoft Access 2003 will take place on March 15-16, 2005. The number of participants to each session is limited to 12. The course will be in English, with an English-French bilingual instructor. The course fee is 400.- CHF per person, scaling down in case of a class of more than 4 participants. The cost of the optional ECDL certification, that will take place at a subsequent date, is 112.- CHF for t...

  1. Technical Training: New Course on Microsoft Access 2003 - ECDL Module 5

    CERN Multimedia

    Monique Duval

    2005-01-01

    CERN Technical Training 2005: Learning for the LHC! The CERN Technical Training programme is now proposing a new course on Microsoft Access 2003, designed for people using Access to work with databases. The course programme will include the description of the objects of an Access database, and how to work with Access, creating and using queries, tables, forms and reports. After this course, participants will be at the level of the ECDL Certificate, Database Module 5. Optionally, it will be possible to stand the ECDL examination at the CERN Training Centre. The first scheduled session of this two-day course on Microsoft Access 2003 will take place on March 15-16, 2005. The number of participants to each session is limited to 12. The course will be in English, with an English-French bilingual instructor. The course fee is 400.- CHF per person, scaling down in case of a class of more than 4 participants. The cost of the optional ECDL certification, that will take place at a subsequent date, is 112.- CHF for ...

  2. The neutron Time-Of-Flight facility, n_TOF, at CERN (I): Technical Description

    CERN Document Server

    n_TOF, Collaboration

    2013-01-01

    The n_TOF facility is a spallation neutron source operating at CERN from 2001. It produces, thanks to the characteristics of the proton driver and of the massive Pb target, a wide energy, very high instantaneous neutron flux, which is employed for neutron-induced reactions measurement. The n TOF facility resumed operation in November 2008, after a 4 years stop due to radioprotection issues connected with the operation of the spallation target. It features a new lead spallation target with a more robust design a more efficient cooling, separate moderator circuit and a target area ventilation system. In this contribution technical details about this facility and its operation will be given, together with future perspective for the performances of the facility.

  3. Addendum to Technical Proposal: A Facility to Search for Hidden Particles (SHiP) at the CERN SPS

    CERN Document Server

    Collaboration, SHiP

    2015-01-01

    With the Technical Proposal submitted to the SPSC committee in April 2015, the SHiP collaboration declared its interest in proceeding towards a Comprehensive Design Study phase with the aim of preparing for the Technical Design Reports pending an approval by the CERN committees. Following the recommendation by the SPSC, it has been decided to complement the TP with this addendum that provides an update of the key aspects for the review of the SHiP project.

  4. Technical Training: Make the most of Office, Sharepoint and Lync 2013

    CERN Multimedia

    2014-01-01

    The IT Department, in cooperation with the Technical Training team, would like to invite you to IT Technical Training Tutorials 2014: Make the most of Office, Sharepoint and Lync 2013. In this lecture series, we will present: Microsoft Office 2013 Microsoft Lync 2013 (Including IP telephony) Microsoft SharePoint 2013 Sessions in French: 7 October, 9 a.m. - 12 p.m. Sessions in English: 13 October, 9 a.m. - 12 p.m. This training is free of charge, but please create your training request via EDH at: https://edh.cern.ch/Document/Personnel/TRN/new?course=146OEL01. Objectives of the training: General overview of the Microsoft Office 2013, Lync and Sharepoint 2013. Changes in comparison to the 2010 release of the software Discussion of new ways to communicate in the work environment, including audio calls, instant messaging, social newsfeeds and online editing of documents. The exact schedule for both series is available at: http://cern.ch/go/IT3T.

  5. Cooperation Agreement between the Government of Australia and the European Organization for Nuclear Research (CERN) concerning the further development of scientific and technical co-operation in the research projects of CERN

    International Nuclear Information System (INIS)

    This agreement was concluded on 1 November 1991 for five years and is renewable. Australia will participate in the CERN research projects in the field of experimental and technical physics, accelerator and detector engineering. (NEA)

  6. Personalization technical and tactical training of qualified judokas.

    Directory of Open Access Journals (Sweden)

    Shishlova Darya Viktorovna

    2011-10-01

    Full Text Available Systematized the literature regarding individual technical and tactical training of qualified judo wrestlers. A system for individualizing the technical and tactical training in women's judo. Highlighted the main provisions of individualization of technical and tactical training of qualified judo wrestlers. Certainly the structure of individualization process of preparing athletes. A pattern of dynamics of individual functional state. Developed interactive technology to improve the individualization of the training process.

  7. Institutional Assessment of Sindh Technical Education and Vocational Training Authority

    OpenAIRE

    World Bank

    2010-01-01

    Providing quality training that leads young people to jobs is critical for the economic and social development of the Province of Sindh, Pakistan. This working paper assesses the strengths and weaknesses of the Sindh Technical Education and Vocational Training Authority (STEVTA) as a provincial apex body in Technical Education and Vocational Training (TVET). The recent establishment of STE...

  8. Technical Training Seminar: Physicists in the world of finance

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Monday 27 February TECHNICAL TRAINING SEMINAR from 14:00 to 16:00, Council Chamber (bldg. 503) Physicists in the world of finance Oliver Cooke, Zhengyun Hu / LEHMAN BROTHERS (UK) Two PhD physicists will talk about their experiences of working in investment banking, describing what investment banks do and the jobs which attract physicists and engineers. They will introduce the derivatives markets, and explain the need for advanced modelling. In particular, they will present the many modelling techniques used, including Monte Carlo simulation, solving PDEs, stochastic calculus and data analysis. They will describe a typical day for a physicist in the world of finance, and present a case study in which they will show how they used an idea from physics to solve a finance problem. After a PhD and CERN fellowship on OPAL in the 1990s, Oliver Cooke moved to finance. He was initially a mathematical modeller of derivatives, and now is an exotic derivatives trader at Lehman Brothers in London. He will be j...

  9. Technical Training Seminar: Low-Voltage Differential Signaling (LVDS): Technology and Applications

    CERN Multimedia

    Monique Duval

    2004-01-01

    Tuesday 26 October TECHNICAL TRAINING SEMINAR from 14:00 to 16:30, Auditorium 40-SS-C01 Low-Voltage Differential Signaling (LVDS): Technology and Applications Herbert Eisenring, Kai Peters / NATIONAL SEMICONDUCTOR (Europe) National Semiconductor pioneered the Low-Voltage Differential Signaling (LVDS) technology, and is a recognized leader in high speed differential products and design tools. National Semiconductor offers a wide range of innovative, affordable interconnect solutions including serializer-deserializers (SerDes), drivers-receivers-transceivers, crosspoint switches and clock drivers. LVDS is a new technology addressing the needs of todays high performance data transmission applications, and the LVDS standard is becoming the most popular differential data transmission standard in the industry. This Technical Training Seminar will present National Semiconductor existing and future products, and some applications relevant to the activities carried out at CERN. 14:00 - 14:15 Presentation of Nati...

  10. Technical Training Seminar: Low-Voltage Differential Signaling (LVDS): Technology and Applications

    CERN Multimedia

    Monique Duval

    2004-01-01

    Tuesday 26 October TECHNICAL TRAINING SEMINAR from 14:00 to 16:30, Auditorium 40-SS-C01 Low-Voltage Differential Signaling (LVDS): Technology and Applications Herbert Eisenring, Kai Peters / NATIONAL SEMICONDUCTOR (Europe) National Semiconductor pioneered the Low-Voltage Differential Signaling (LVDS) technology, and is a recognized leader in high speed differential products and design tools. National Semiconductor offers a wide range of innovative, affordable interconnect solutions including serializer-deserializers (SerDes), drivers-receivers-transceivers, crosspoint switches and clock drivers. LVDS is a new technology addressing the needs of todays high performance data transmission applications, and the LVDS standard is becoming the most popular differential data transmission standard in the industry. This Technical Training Seminar will present National Semiconductor existing and future products, and some applications relevant to the activities carried out at CERN. 14:00 - 14:15 Presentation of Nat...

  11. Institutional Assessment of Sindh Technical Education and Vocational Training Authority

    OpenAIRE

    Janjua, Yasin; Blom, Andreas

    2010-01-01

    Providing quality training that leads young people to jobs is critical for the economic and social development of the Province of Sindh, Pakistan. This working paper assesses the strengths and weaknesses of the Sindh Technical Education and Vocational Training Authority (STEVTA) as a provincial apex body in Technical Education and Vocational Training (TVET). The recent establishment of STEVTA was a major step to reduce fragmentation of training policies and programs. The paper assesses the Au...

  12. CERN & Society

    CERN Multimedia

    2016-01-01

    Non Member State Summer Students 2015 are interviewed about their decision to study STEM subjects, to apply for CERN NMSSS programme, their experience onsite @CERN and takeaways, their future goals and aspirations, offering also advice to fellow students.The Non Member State Summer Student Programme stands for a unique opportunity for students from all over the world to spend their summer at CERN in Geneva, getting involved in some of the world’s biggest experiments. For 8 weeks, summer students gather on-site at CERN and join in the day-to-day work of research. The Programme targets advanced undergraduate and beginning graduate students of physics, computing and engineering, particularly from developing countries. Participating students receive scientific training, attend lectures and work on laboratory-based projects alongside with CERN experts and fellow students.

  13. Identifying Technical Content Training Needs of Georgia Agriculture Teachers

    Science.gov (United States)

    Peake, Jason B.; Duncan, Dennis W.; Ricketts, John C.

    2007-01-01

    The continuing trend toward increasing diversity of curriculum offered within secondary agricultural education programs is driving a change in pre-service and in-service technical training for agriculture teachers. This study looks at agriculture teachers' perceived importance of, and competence in, traditional technical competencies such as…

  14. Technical Training: New Course on Microsoft Access 2003 - ECDL Module 5

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The CERN Technical Training programme offers a new course on Microsoft Access 2003, designed for people using Access to work with databases. The course programme will include the description of the objects of a database, and how to create and use queries, tables, forms and reports. After this course, participants will be at the level of the ECDL Certificate, Database Module 5. Optionally, it will be possible to stand the ECDL examination at the CERN Training Centre. The next scheduled session of this course will take place on May 11-12, 2005. The number of participants to each session is limited to 12. The course will be in English, with an English-French bilingual instructor. The course fee is 400.- CHF per person, scaling down in case of a class of more than 4 participants. The cost of the optional ECDL certification, that will take place at a subsequent date, is 112.- CHF for the skills card (valid for the seven ECDL modules), and 25.- for each online test. The possibility of obtaining the ECDL certificat...

  15. Vocational-Technical Instructors Passive-Solar Training Workshop

    Science.gov (United States)

    1981-07-01

    The successful efforts to provide training to instructors who teach residential design and construction at vocational-technical (vo-tech) schools are described. The training was directed toward those techniques one must consider when designing and/or constructing an energy efficient passive solar home.

  16. The Job Training and Job Satisfaction Survey Technical Manual

    Science.gov (United States)

    Schmidt, Steven W.

    2004-01-01

    Job training has become an important aspect of an employee's overall job experience. However, it is not often called out specifically on instruments measuring job satisfaction. This technical manual details the processes used in the development and validation of a survey instrument to measure job training satisfaction and overall job…

  17. Aerospace Training. Washington's Community and Technical Colleges

    Science.gov (United States)

    Washington State Board for Community and Technical Colleges, 2014

    2014-01-01

    Aerospace is an economic powerhouse that generates jobs and fuels our economy. Washington's community and technical colleges produce the world-class employees needed to keep it that way. With about 1,250 aerospace-related firms employing more than 94,000 workers, Washington has the largest concentration of aerospace expertise in the nation. To…

  18. Technical Training: ELEC-2005 - Electronics in High Energy Physics: Summer Term (May 2005)

    CERN Multimedia

    Monique Duval

    2005-01-01

    ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the successful ELEC-2002 course series. This comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2005 is composed of four Terms. The Winter (Introduction to electronics in HEP) and Spring (Integrated circuits and VLSI technology for physics) Terms already took place; the next two Terms will run with the following schedule: Summer Term: System electronics for physics: Issues (May, 7 lectures) - now open for registration Autumn Term: Electronics applications in HEP experiments (November-December, 10 lectures) Lectures within each Term will take place on Tuesday...

  19. Technical Training: ELEC-2005 - Electronics in High Energy Physics: Summer Term (May 2005)

    CERN Multimedia

    Davide Vitè

    2005-01-01

    ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the successful ELEC-2002 course series.This comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2005 is composed of four Terms. The last two Terms will run with the following schedule: Summer Term: System electronics for physics: Issues (May, 7 lectures) - now open for registration Autumn Term: Electronics applications in HEP experiments (November-December, 10 lectures) Lectures within each Term will take place on Tuesdays and Thursdays, from 10h00 to 12h30. The course will be in English, with questions and answers also possible in French. Separate registrati...

  20. Technical Training Programme: Learning for the LHC ! CLEAN-2002: WORKING IN A CLEANROOM

    CERN Multimedia

    Davide Vitè

    2002-01-01

    CLEAN-2002 is a new, free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific problems put forward beforehand by attendees will also be addressed. More information and registration through EDH is available HERE The next session, in English, will be on 24 April (afternoon). Other sessions, in French and English, will be offered following demand: the first session in French will be organised in May or June. Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch

  1. TECHNICAL TRAINING FOR INDUSTRIAL RADIOGRAPHERS. FINAL REPORT.

    Science.gov (United States)

    BEARDEN, H.D.

    TO OFFSET THE PROBLEM OF A SHORTAGE OF QUALIFIED TECHNICIANS TO SERVE AS RADIOGRAPHERS IN INDUSTRY, 19 STUDENTS WERE TRAINED IN TWO CLASSES, THE FIRST CONSISTING OF 19, AND THE SECOND OF EIGHTEEN 30-HOUR WEEKS. ORGANIZED FORMAL OR LECTURE-TYPE INSTRUCTION WAS PRESENTED IN SOME SUBJECT AREAS, BUT THE MAJOR EMPHASIS WAS ON LABORATORY EXPERIENCES…

  2. Dear CERN and ESO Colleagues and Retirees

    CERN Multimedia

    Pension Fund

    2010-01-01

    Following approval by the CERN Pension Fund Governing Board, the CERN Pension Fund team is pleased to announce the new website address of your Pension Fund: http://pensionfund.cern.ch I take this opportunity to thank all the technical teams at CERN for the quality and rapidity of their support. Kind regards, Théodore Economou CEO, CERN Pension Fund

  3. A Common Software Configuration Management System for CERN SPS and LEP Accelerators and Technical Services

    CERN Document Server

    Hatziangeli, Eugenia; Bragg, A E; Ninin, P; Patino, J; Sobczak, H

    1999-01-01

    Software configuration management activities are crucial to assure the integrity of current operational and the quality of new software either being developed at CERN or outsourced. The functionality of the present management system became insufficient with large maintenance overheads. In order to improve our situation, a new software configuration management system has been set up. It is based on Razor, a commercial tool, which supports the management of file versions and operational software releases, along with integrated problem reporting capabilities. In addition to the basic tool functionality, automated procedures were custom made, for the installation and distribution of operational software. Policies were developed and applied over the software development life cycle to provide visibility and control. The system ensures that, at all times, the status and location of all deliverable versions are known, the state of shared objects is carefully controlled and unauthorised changes prevented. It provides ...

  4. A Common Software-Configuration Management System for CERN SPS and LEP Accelerators and Technical Services

    CERN Document Server

    Hatziangeli, Eugenia; Bragg, A E; Ninin, P; Patino, J; Sobczak, H

    2000-01-01

    Software-configuration management activities are crucial to ensure the integrity of current operational software and the quality of new software either being developed at CERN or outsourced. The functionality of the present management system became insufficient with large maintenance overheads. In order to improve our situation, a new software-configuration management system has been set up. It is based on Razor R, a commercial tool, which supports the management of file versions and operational software releases, along with integrated problem-reporting capabilities. In addition to the basic tool functionality, automated procedures were custom-made for the installation and distribution of operational software. The system ensures that, at all times, the status and location of all deliverable versions are known, the state of shared objects is carefully controlled and unauthorized changes prevented. This paper outlines the reasons for selecting the chosen tool, the implementation of the system and the final goal...

  5. A day in the CERN Control Centre

    CERN Multimedia

    Rosaria Marraffino

    2015-01-01

    The CERN Control Centre (CCC) is the nerve centre of the CERN beam systems. From this room, the experts prepare, monitor, adjust, and control the particle beams that circulate throughout the accelerator complex while ensuring that the services and the technical infrastructure work flawlessly. Buttons, screens, telephones, lights (but no sound): in the CCC, everything is ready to make it possible for the LHC to reach the unprecedented energies expected at Run 2.   Seen from above, the CERN Control Centre resembles the shape of a quadrupole magnet. The consoles are distributed in four circles, called “islands”, dedicated to the LHC, the SPS, the PS Complex and the Technical Infrastructure (TI) respectively. Spread between TI and LHC are the Cryogenics consoles. Being in the same room allows the 24h-manned islands to be constantly in touch with one another, thus ensuring the best performance of the machines. At the LHC island, operators are currently busy training the magnet...

  6. Role-playing for more realistic technical skills training.

    Science.gov (United States)

    Nikendei, C; Zeuch, A; Dieckmann, P; Roth, C; Schäfer, S; Völkl, M; Schellberg, D; Herzog, W; Jünger, J

    2005-03-01

    Clinical skills are an important and necessary part of clinical competence. Simulation plays an important role in many fields of medical education. Although role-playing is common in communication training, there are no reports about the use of student role-plays in the training of technical clinical skills. This article describes an educational intervention with analysis of pre- and post-intervention self-selected student survey evaluations. After one term of skills training, a thorough evaluation showed that the skills-lab training did not seem very realistic nor was it very demanding for trainees. To create a more realistic training situation and to enhance students' involvement, case studies and role-plays with defined roles for students (i.e. intern, senior consultant) were introduced into half of the sessions. Results of the evaluation in the second term showed that sessions with role-playing were rated significantly higher than sessions without role-playing.

  7. CERN firemen share their expertise

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    Firemen from local fire brigades have been coming to CERN to learn modern fire-fighting techniques. This apparatus allows the simulation of the spectacular backdraft phenomenon, so firemen training at CERN learn to understand it.

  8. TECHNICAL TRAINING SEMINAR: High Temperature Superconductors: Progress and Issues

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Monday 24 June from 14:30 to 15:30 - Training Centre Auditorium - bldg. 593-11 High Temperature Superconductors: Progress and Issues Prof. Jan Evetts / UNIVERSITY OF CAMBRIDGE, Department of Materials Science and Metallurgy, UK Grappling with grain boundaries: Current transport processes in granular High Temperature Superconductors (HTS) The development of High Temperature Superconductors, seen from a materials scientist's point of view, is relevant to the superconductivity community at CERN: their possible high current applications can include high performance magnets for future accelerators. There is an urgent need to develop a quantitative description of HTS conductors in terms of their complex anisotropy, inhomogeneity and dimensionality. This is essential both for the practical specification of a conductor and for charting routes to conductor optimisation. The critical current, the n-value, dissipation and quenching characteristics are amongst most important parameters that make up an engineering specifi...

  9. 1 November 2012 - Signature of the Co-operation Agreement between the Administrative Department of Science, Technology and Innovation (COLCIENCIAS) of Colombia and the European Organization for Nuclear Research (CERN) concerning Scientific and Technical Co-operation in High-Energy Physics and related technologies by CERN Director-General R. Heuer, witnessed by Ambassador of Colombia to Switzerland C. Turbay Quintero.

    CERN Multimedia

    Maximilien Brice

    2012-01-01

    1 November 2012 - Signature of the Co-operation Agreement between the Administrative Department of Science, Technology and Innovation (COLCIENCIAS) of Colombia and the European Organization for Nuclear Research (CERN) concerning Scientific and Technical Co-operation in High-Energy Physics and related technologies by CERN Director-General R. Heuer, witnessed by Ambassador of Colombia to Switzerland C. Turbay Quintero.

  10. 76 FR 62455 - Announcement of Updated Funding Availability for H-1B Technical Skills Training Grants

    Science.gov (United States)

    2011-10-07

    ... Employment and Training Administration Announcement of Updated Funding Availability for H-1B Technical Skills... Federal Register announcing the availability of $240 million for the H-1B Technical Skills Training Grants... available and encouraging additional applicants to apply for the H-1B Technical Skills Training...

  11. Education and training of the shift technical advisor

    International Nuclear Information System (INIS)

    This paper discusses the background and current approaches for qualifying the required position of Shift Technical Advisor (STA). Industry positions regarding the regulation are given. Problems associated with meeting the requirement are identified, along with a discussion of other alternatives for upgrading the education level of shift management. Inherent in the discussion is the conclusion that voluntary improvements in the training and education of shift management personnel are more effective than mandatory positions or degree requirements

  12. Apprenticeships at CERN: a host of awards

    CERN Multimedia

    2009-01-01

    This year again, two CERN apprentices have received awards at the end of their training. CERN’s broad range of technical skills means that it can provide training in a wide variety of trades and professions. Denis Fernier receives congratulations from Pierre-François Unger, Counsel state of the canton of Geneva in charge of the department of economics and health. Denis Fernier and Coralie Husi (right) at the prize-giving ceremony of the Union Industrielle de Genève.Every year, CERN hosts six technical apprentices for a four-year period: three electronics technicians and three physics lab technicians. And every year, at the end of their apprenticeships, one or more of them receives an award for being among the best apprentices in Geneva. On 23 September, two young apprentices were honoured by the Union industrielle genevoise (UIG) on passing their exams: Coralie Husi, a physics lab apprentice...

  13. Cooperation Agreement between the European Organization for Nuclear Research (CERN) and The Qatar Foundation for Education, Science and Community Development concerning Scientific and Technical Co-operation in High Energy Physics

    CERN Document Server

    2016-01-01

    Cooperation Agreement between the European Organization for Nuclear Research (CERN) and The Qatar Foundation for Education, Science and Community Development concerning Scientific and Technical Co-operation in High Energy Physics

  14. Co-operation agreement between the European Organization for Nuclear Research (CERN) and the Government of People's Republic of Bangladesh concerning Education, Scientific and Technical Co-operation in High-Energy Physics

    CERN Document Server

    2014-01-01

    Co-operation agreement between the European Organization for Nuclear Research (CERN) and the Government of People's Republic of Bangladesh concerning Education, Scientific and Technical Co-operation in High-Energy Physics

  15. 17 April 2008 - Head of Internal Audit Network meeting visiting the ATLAS experimental area with CERN ATLAS Team Leader P. Fassnacht, ATLAS Technical Coordinator M. Nessi and ATLAS Resources Manager M. Nordberg.

    CERN Multimedia

    Mona Schweizer

    2008-01-01

    17 April 2008 - Head of Internal Audit Network meeting visiting the ATLAS experimental area with CERN ATLAS Team Leader P. Fassnacht, ATLAS Technical Coordinator M. Nessi and ATLAS Resources Manager M. Nordberg.

  16. Windows XP ends its life at CERN – register for Windows 7 training!

    CERN Multimedia

    Michał Kwiatek (IT-OIS)

    2012-01-01

    Windows XP has been around for over 10 years and it is now time to move on. At CERN, general support for Windows XP will end in December 2012, and before this date users are requested to schedule a migration to the next version of Windows – Windows 7.   Windows 7 is already well established at CERN – it is used by a large majority of users. In fact, there was a considerable user demand even before its official release in October 2009 and its adoption has been smooth. Users praise Windows 7 for its improved stability and a clear advantage on laptops is a much more efficient implementation of offline files. The migration to Windows 7 involves a reinstallation of the operating system. Files stored in user home folders on DFS will be immediately available after the reinstallation. Applications will be upgraded to more recent versions and in certain cases, an application may even be replaced by another application providing the same functionality. Microsoft Office suite is a good ...

  17. CERN Video News on line

    CERN Document Server

    2003-01-01

    The latest CERN video news is on line. In this issue : an interview with the Director General and reports on the new home for the DELPHI barrel and the CERN firemen's spectacular training programme. There's also a vintage video news clip from 1954. See: www.cern.ch/video or Bulletin web page

  18. Technical management courses (before July)

    CERN Multimedia

    2015-01-01

    Please find below the courses in the field of technical management scheduled before July and which have places available.       For more details about a course and to register, please go to the Training Catalogue. If you need a course which is not in the catalogue, please contact your supervisor, your Departmental Training Officer or HR-LD at Technical.Management.Training@cern.ch.

  19. PACMAN at CERN

    CERN Multimedia

    2015-01-01

    PACMAN Particle Accelerator Components Metrology and Alignment to the Nanometre scale. PACMAN is an Innovative Doctoral Program Network, offering training to 10 Early Stage Researchers hosted by CERN thanks to The European Commission FP7 Marie Curie Actions.

  20. Broadband Data Converter Technical Presentation at CERN by e2v and ANATEC

    CERN Multimedia

    FI Department

    2008-01-01

    12 September 2008 10:00 – 11:45, Room B Main Building. Technical presentation e2v and ANATEC. e2v Grenoble (http://www.e2v.com) designs and manufactures standard and custom low latency and high speed ADCs that are true single core ADCs. Sampling speeds without interleaving range from 500MSPS to beyond 2.2GSPS with resolution ranging from 8 bits to 10bits and input bandwidths exceed 2.5GHz. With built-in interleaving feature some e2v multi-channel ADCs can reach 5GSPS sampling speed per device. e2v is known to offer 8, 10 and 12 bit ADCs with very low latency, exceptional linearity at high input frequency, that is in the 2nd Nyquist zone and beyond for some devices. This seminar will cover the following topics: Overview of existing standard 8bit, 10bit and 12bit ADCs up to 5GSPS. Key aspects of the e2v broadband ADC architecture. Benefits of true single core ADCs without internal interleaving. Choice of several possibilities to drive the ADC inputs, DC coupling at high spe...

  1. 76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

    Science.gov (United States)

    2011-06-17

    ... (TA-W-71,047A). The workers supply technical training services such as applied industrial technology, industrial automation, industrial maintenance and welding. The Department's Notice was published in the Federal Register on January 12, 2011 (76 FR 2147-2148). The certification was amended on May 18,...

  2. Metabolic Demand and Internal Training Load in Technical-Tactical Training Sessions of Professional Futsal Players.

    Science.gov (United States)

    Wilke, Carolina F; Ramos, Guilherme P; Pacheco, Diogo A S; Santos, Weslley H M; Diniz, Mateus S L; Gonçalves, Gabriela G P; Marins, João C B; Wanner, Samuel P; Silami-Garcia, Emerson

    2016-08-01

    Wilke, CF, Ramos, GP, Pacheco, DAS, Santos, WHM, Diniz, MSL, Gonçalves, GGP, Marins, JCB, Wanner, SP, and Silami-Garcia, E. Metabolic demand and internal training load in technical-tactical training sessions of professional futsal players. J Strength Cond Res 30(8): 2330-2340, 2016-The aim of the study was to characterize aspects of technical-tactical training sessions of a professional futsal team. We addressed 4 specific aims: characterize the metabolic demands and intensity of these training sessions, compare the training intensity among players of different positions, compare the intensity of different futsal-specific activities (4 × 4, 6 × 4, and match simulation), and investigate the association between an objective (training impulse; TRIMP) and a subjective method (session rating of perceived exertion; sRPE) of measuring a player's internal training load. Twelve top-level futsal players performed an incremental exercise to determine their maximal oxygen consumption, maximal heart rate (HRmax), ventilatory threshold (VT), and respiratory compensation point (RCP). Each player's HR and RPE were measured and used to calculate energy expenditure, TRIMP, and sRPE during 37 training sessions over 8 weeks. The average intensity was 74 ± 4% of HRmax, which corresponded to 9.3 kcal·min. The players trained at intensities above the RCP, between the RCP and VT and below the VT for 20 ± 8%, 28 ± 6%, and 51 ± 10% of the session duration, respectively. Wingers, defenders, and pivots exercised at a similar average intensity but with different intensity distributions. No difference in intensity was found between the 3 typical activities. A strong correlation between the average daily TRIMP and sRPE was observed; however, this relationship was significant for only 4 of 12 players, indicating that sRPE is a useful tool for monitoring training loads but that it should be interpreted for each player individually rather than collectively. PMID:26808850

  3. Technical Training Seminar: Laser Trackers: the Local Positioning Technology (LPT)

    CERN Multimedia

    Davide Vitè

    2005-01-01

    Friday 20 May from 10:00 to 16:00, Training Centre (bldg. 593) Laser Trackers: the Local Positioning Technology (LPT) Simon Moser, Michael Lettau, Achim Lupus, Niklaus Suter, Leica GEOSYSTEMS AG, Switzerland Laser trackers are used at CERN for different applications within the LHC Project. Leica Geosystems AG have been developing during the last four years the revolutionary Local Positioning Technology (LPT). Laser trackers are increasingly used to ensure accuracy of large fabrications, and alignment in the final assembly process. Competing portable Coordinate Measuring Machines (CMM) with articulated arms require a frequent repositioning, known to lead to a loss of accuracy and efficiency. Leica Geosystems developed armless solutions, the T-Probe and T-Scan, for use with its laser trackers. The combination of the tracker technology with photogrammetry is the base of LPT, enabling real time measurements with free hand-held devices, such as the T-Probe and T-Scan. T-Probe and T-Scan overcome the proble...

  4. Technical training: RF superconductivity and accelerator cavity applications

    CERN Document Server

    Technical Training

    2016-01-01

    We are happy to announce a new training course organised by the TE-VSC group in the field of the physics and applications of superconductors. The course provides an overview and update of the theory of radiofrequency and superconductors:   RF Superconductivity and Accelerator Cavity Applications https://cern.ch/course/?164VAC19 One timetable only:  Tuesday, 8 March 2016: from 2 p.m. to 4 p.m. Wednesday, 9 March 2016: from 9.30 a.m to 11.30 a.m. Thursday, 10 March 2016: from 9.30 a.m to 11.30 a.m. Monday, 14 March 2016: from 9.30 a.m to 11.30 a.m. Tuesday, 15 March 2016: from 9.30 a.m to 11.30 a.m. Wednesday, 16 March 2016: from 9.30 a.m to 11.30 a.m. Thursday, 17 March 2016: from 9.30 a.m to 11.30 a.m. Target audience: Experts in radiofrequency or solid state physics (PhD level). Pre-requisites: Basic knowledge of quantum physics and superc...

  5. Technical Tarining: C++ for Particle Physicists

    CERN Multimedia

    Monique Duval

    2005-01-01

    Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 7-11 March. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page : http://cern.ch/TechnicalTraining/ENSTEC/p2002/Software/cpppp_e.asp Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the ‘C++ for Particle Physicists' course and giving their name, CERN ID number, the Team account number to which the course fee should be charged, and VERY IMPORTANTLY an email address to which an invitation to the course can be sent. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

  6. CERN apprentice receives award

    CERN Multimedia

    2008-01-01

    Another CERN apprentice has received an award for the quality of his work. Stéphane Küng (centre), at the UIG ceremony last November, presided over by Geneva State Councillor Pierre-François Unger, Head of the Department of Economics and Health. Electronics technician Stéphane Küng was honoured in November by the Social Foundation of the Union Industrielle Genevoise (UIG) as one of Geneva’s eight best apprentices in the field of mechatronics. The 20-year-old Genevan obtained his Federal apprentice’s certificate (Certificat fédéral de capacité - CFC) in June 2007, achieving excellent marks in his written tests at the Centre d’Enseignement Professionnel Technique et Artisanal (CEPTA). Like more than 200 youngsters before him, Stéphane Küng spent part of his four-year sandwich course working at CERN, where he followed many practical training courses and gained valuable hands-on experience in various technical groups and labs. "It’ always very gr...

  7. Remotely Operated Train for Inspection and Measurement in CERN's LHC Tunnel

    CERN Document Server

    Kershaw, K; Bestmann, P; Feniet, T; Forkel-Wirth, D; Grenard, J L; Rousset, N

    2010-01-01

    Personnel access to the LHC tunnel will be restricted to varying extents during the life of the machine due to radiation and cryogenic hazards. For this reason a remotely operated modular inspection train, (TIM) running on the LHC tunnel’s overhead monorail has been developed. In order to be compatible with the LHC personnel access system, a small section train that can pass through small openings at the top of sector doors has now been produced. The basic train can be used for remote visual inspection; additional modules give the capability of carrying out remote measurement of radiation levels, environmental conditions around the tunnel, and even remote measurement of the precise position of machine elements such as collimators. The paper outlines the design, development and operation of the equipment including preparation of the infrastructure. Key features of the trains are described along with future developments and intervention scenarios.

  8. Exploration of Technical and Nontechnical Employee Attitudes toward Participation in Training

    Science.gov (United States)

    Ryburn, Ben; Brown, Dan; Meier, Ron

    2011-01-01

    This study examined technical and nontechnical employee attitudes toward participation in training. A survey was administered to 337 self-identified technical and nontechnical university employees. Our findings are as follows: (a) most employees prefer training that is less than 2 hours in length, (b) employees do not want training outside their…

  9. France at CERN

    CERN Multimedia

    2001-01-01

    From 19 to 22 June, for the 8th edition of France at CERN, 31 French companies presented their latest technology to the Laboratory. Demonstrating the latest in French technology during France at CERN. The France at CERN exhibition was inaugurated by Mr. Bernard Frois, Director of the Department Energy, Transport, Environment and Natural Resources at the Technology Directorate of the Ministry of Research. 'France is happy to be a Member of CERN, which is a successful example of the construction of scientific Europe,' he declared during the inauguration, 'this exhibition is an excellent opportunity to put fundamental research and advanced technology in contact.' Mr. Philippe Petit, French Ambassador to Switzerland, and Mr. Alexandre Defay, technical adviser of the Minister of Research, were also present to represent France and its industry. Representing CERN at the 19 June opening of the exhibition was Claude Detraz, who said, 'I hope that this exhibition will make it possible to weave stronger links between ...

  10. CERN Mobility Survey

    CERN Multimedia

    GS Department

    2011-01-01

    The Institute of Shipping and Transport of the University of the Aegean and the National Technical University of Athens are partners with CERN in a study of mobility patterns between and within the CERN sites and to that effect have realized a mobility survey dedicated to the CERN community.         The study aims to understand: How you presently get around the CERN sites; What problems you encounter regarding mobility; What your needs are; What improvements you’d like to see; What measures you would like to see implemented most. The replies we receive will enable us to define a general policy promoting the diversity of mobility at CERN and to establish and quantify the strategic actions to be implemented for both the short and medium term. The objectives of the transport mobility plans are to: Facilitate mobility within and between the CERN sites by identifying adequate solutions in response to individual ...

  11. Technical Training: Annonce de nouveau cours: Utilisation des fichiers PDF avec ACROBAT 6.0

    CERN Multimedia

    Monique Duval

    2005-01-01

    CERN Technical Training 2005: Learning for the LHC! Un nouveau cours pratique sur Adobe Acrobat version 6.0 est proposé à l'ensemble du personnel par le service de l'Enseignement Technique, pour répondre aux besoins de formation des utilisateurs des documents PDF. La première session aura lieu le 1er mars 2005. Objectifs : Maîtriser les différentes fonctions d'Adobe Acrobat 6.0. Programme : Présentation d'Adobe Acrobat 6.0. Création de fichiers PDF depuis Microsoft Office et d'autres applications. Création de fichiers Postscript. Modification de fichiers PDF, enregistrement et exportation. Protection par mot de passe et par signature numérique. Navigation dans les documents : interactivité, vignettes et pages, signets, liens, articles, affichage et ouverture des PDF, recherche. Travail en commun: Ajout de commentaires, révision par messagerie électronique Dur&e...

  12. Technical Training: ELEC-2005 - Electronics in High Energy Physics: Summer Term (May 2005)

    CERN Multimedia

    Davide Vitè

    2005-01-01

    ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme. It is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. The next ELEC-2005 Summer Term, System electronics for physics: Issues, is now open for online registration, and will start on May 10th. Lectures will take place on Tuesdays and Thursdays, from 10h00 to 12h30. The course will be in English, with questions and answers also possible in French. Separate registration to each Term is required: attendance costs will be of 10.- CHF per lecture (Summer Term: 70.- CHF). If you are interested in attending, please discuss with your supervisor and/or your DTO, and apply electronically via EDH. Participation to all sessions in a...

  13. UK businesses benefit from CERN technology

    CERN Multimedia

    Hill, Nathan

    2003-01-01

    At CERN, there are many examples of technologies becoming commercially useful. CERN technologies are of value to industry because particle physics experiments demand ever-higher levels of technical performance (1/2 page)

  14. ENGLISH TRAINING

    CERN Document Server

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. LANGUAGE TRAINING Françoise Benz tel. 73127 language.training@cern.ch PLACES AVAILABLE Writing Professional Documents in English This course is designed for people with a good level of spoken English who need to improve their professional writing (administrative, scientific, technical). Duration: 20 hours (2 hours a week) Price: 440 CHF (for 8 students) Date and timetable will be fixed when there are sufficient participants enrolled. Oral Expression This course is intended for people with a good knowledge of English who want to practise and maintain their sp...

  15. Enhancing Technical and Vocational Education and Training (TVET) in Nigeria for Sustainable Development: Competency-Based Training (CBT) Approach

    Science.gov (United States)

    Okoye, K. R. E.; Michael, Ofonmbuk Isaac

    2015-01-01

    This paper attempts to examine the concept of Competency-Based Training (CBT) as a veritable mode of delivery of Technical and Vocational Education and Training (TVET) and at the same time highlights some of the strengths and weaknesses of implementing competency-base training. The characteristics, principles and benefits of CBT were also x-rayed.…

  16. Signature of an agreement between CERN and the National Technical University of Athens (NTUA) to increase the participation of Greek students in CERN's Doctoral, Technical and Summer Student programmes.

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    Left to right: Professor Claude Detraz (Director for fixed target and future programmes); Dr. Magda Lola (deputy leader of the Recruitment andd FAS Programmes group of Human Resources division), responsible for the negotiations from the CERN side; and Professor Evangelos Gazis (NTUA), representing the Rector of NTUA, Professor Themistoklis Xanthopoulos.

  17. CERN Technical Training 2005: Introduction à Dreamweaver MX (3-4 octobre 2005)

    CERN Document Server

    Daive Vitè

    2005-01-01

    Learning for the LHC! Un nouveau cours pratique sur Dreamweaver MX est proposé dès maintenant à l'ensemble du personnel par le service de l'Enseignement Technique. La première session aura lieuen français lundi 3 et mardi 4 octobre 2005. Objectifs : Maîtriser les différentes fonctions de base de Dreamweaver MX. Programme : L’interface Dreamweaver MX. Images, couleurs et fonds. Ajouter des liens. Présenter des données en tables. Utiliser les tables pour la mise en page. L’Interface mise en page. L’image réactive. Les tags META et les moteurs de recherche. Les formulaires. Les éléments dynamiques. Boutons dynamiques. Boutons flash et texte. La barre de navigation. Les styles HTML. Feuilles de style. Positionnement par couches. Gestion du site. Révision générale et évaluation. Durée : 2 jours. Coût estimé : entre 700.- et 350.- CHF par personne, selon le nombre de participants (plus que 4 places disponibles sur cette session). Langue : Français Chaque participant recevra un ...

  18. CERN Technical Training 2005: Introduction à Dreamweaver MX (3-4 octobre 2005)

    CERN Multimedia

    Davide Vitè

    2005-01-01

    Learning for the LHC! Un nouveau cours pratique sur Dreamweaver MX est proposé dès maintenant à l'ensemble du personnel par le service de l'Enseignement technique. La première session aura lieu en français lundi 3 et mardi 4 octobre 2005. Objectifs : Maîtriser les différentes fonctions de base de Dreamweaver MX. Programme : L'interface Dreamweaver MX. Images, couleurs et fonds. Ajouter des liens. Présenter des données en tables. Utiliser les tables pour la mise en page. L'Interface mise en page. L'image réactive. Les tags META et les moteurs de recherche. Les formulaires. Les éléments dynamiques. Boutons dynamiques. Boutons flash et texte. La barre de navigation. Les styles HTML. Feuilles de style. Positionnement par couches. Gestion du site. Révision générale et évaluation. Durée : 2 jours. Coût estimé : entre 700.- et 350.- CHF par personne, selon le nombre de participants (limité à 12 par session). Langue : Français Chaque participant recevra un support de cours avec exercic...

  19. CERN Technical Training Programme 2003: Learning for the LHC! - French version only

    CERN Multimedia

    2003-01-01

    Nouveau curriculum CADENCE : cours et prochaines sessions Dans le cadre du suivi du programme ELEC-2002: Electronics in HEP, un nouveau curriculum CADENCE est maintenant offert par l'Enseignement Technique, composé par quatre modules: Module 1. Introduction à la CAO CADENCE : de la saisie de schéma Concept-HDL au PCB - prochaine session les 20 et 22 mai prochains (cours de 2 jours) Module 2. Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE - prochaine session en octobre 2003 (cours de 2 jours) Module 3. Conception de PCB rapides dans le flot CADENCE - première session le 11 juin 2003 (cours d'une demi-journée) Module 4. Réalisation de PCB rapides dans le flot CADENCE - première session le 17 juin 2003 (cours de 2 heures) Les cours, en français, seront gratuits et animés par Serge Brobecker et Jean-Michel Sainson de la section IT/PS/EAS (Electronic Applications Support). Objectif de ces modules de formation est de donner une vue générale du système CAO CADENCE utilisé...

  20. Direct Numerical Modeling of E-Cloud Driven Instability of a Bunch Train in the CERN SPS

    International Nuclear Information System (INIS)

    The simulation package WARP-POSINST was recently upgraded for handling multiple bunches and modeling concurrently the electron cloud buildup and its effect on the beam, allowing for direct self-consistent simulation of bunch trains generating, and interacting with, electron clouds. We have used the WARP-POSINST package on massively parallel supercomputers to study the buildup and interaction of electron clouds with a proton bunch train in the CERN SPS accelerator. Results suggest that a positive feedback mechanism exists between the electron buildup and the e-cloud driven transverse instability, leading to a net increase in predicted electron density. Electron clouds have been shown to trigger fast growing instabilities on proton beams circulating in the SPS and other accelerators. So far, simulations of electron cloud buildup and their effects on beam dynamics have been performed separately. This is a consequence of the large computational cost of the combined calculation due to large space and time scale disparities between the two processes. We have presented the latest improvements of the simulation package WARP-POSINST for the simulation of self-consistent ecloud effects, including mesh refinement, and generation of electrons from gas ionization and impact at the pipe walls. We also presented simulations of two consecutive bunches interacting with electrons clouds in the SPS, which included generation of secondary electrons. The distribution of electrons in front of the first beam was initialized from a dump taken from a preceding buildup calculation using the POSINST code. In this paper, we present an extension of this work where one full batch of 72 bunches is simulated in the SPS, including the entire buildup calculation and the self-consistent interaction between the bunches and the electrons.

  1. Self-Consistant Numerical Modeling of E-Cloud Driven Instability of a Bunch Train in the CERN SPS

    International Nuclear Information System (INIS)

    The simulation package WARP-POSINST was recently upgraded for handling multiple bunches and modeling concurrently the electron cloud buildup and its effect on the beam, allowing for direct self-consistent simulation of bunch trains generating, and interacting with, electron clouds. We have used the WARP-POSINST package on massively parallel supercomputers to study the growth rate and frequency patterns in space-time of the electron cloud driven transverse instability for a proton bunch train in the CERN SPS accelerator. Results suggest that a positive feedback mechanism exists between the electron buildup and the e-cloud driven transverse instability, leading to a net increase in predicted electron density. Comparisons to selected experimental data are also given. Electron clouds have been shown to trigger fast growing instabilities on proton beams circulating in the SPS and other accelerators. So far, simulations of electron cloud buildup and their effects on beam dynamics have been performed separately. This is a consequence of the large computational cost of the combined calculation due to large space and time scale disparities between the two processes. We have presented the latest improvements of the simulation package WARP-POSINST for the simulation of self-consistent ecloud effects, including mesh refinement, and generation of electrons from gas ionization and impact at the pipe walls. We also presented simulations of two consecutive bunches interacting with electrons clouds in the SPS, which included generation of secondary electrons. The distribution of electrons in front of the first beam was initialized from a dump taken from a preceding buildup calculation using the POSINST code. In this paper, we present an extension of this work where one full batch of 72 bunches is simulated in the SPS, including the entire buildup calculation and the self-consistent interaction between the bunches and the electrons. Comparisons to experimental data are also given.

  2. ACADEMIC TRAINING (O. BRUNING / CERN-SL, S. TAPPROGGE / Helsinki Univ. of Physics, E. TSESMELIS / Helsinki Univ. of Physics , CERN-EST)

    CERN Document Server

    Françoise Benz

    2002-01-01

    21, 22, 23 May LECTURE SERIES from 11.00 to 12.00 hrs - Auditorium, bldg. 500 The LHC Machine/Experiment Interface by O. BRUNING / CERN-SL, S. TAPPROGGE / Helsinki Univ. of Physics, E. TSESMELIS / Helsinki Univ. of Physics, CERN-EST     This series of three lectures will provide an overview of issues arising at the interface between the LHC machine and the experiments, which are required for guiding the interaction between the collider and the experiments when operation of the LHC commences. A basic description of the LHC Collider and its operating parameters, such as its energy, currents, bunch structure and luminosity, as well as variations on these parameters, will be given. Furthermore, the optics foreseen for the experimental insertions, the sources and intensities of beam losses and the running-in scenarios for the various phases of operation will be discussed. A second module will cover the specific requirements and expectations of each experiment in terms of the layout of experiment...

  3. Study of efficiency of using neural networks when forecasting the train arrival at the technical stations

    OpenAIRE

    Вернигора, Роман Віталійович; Єльнікова, Лідія Олегівна

    2015-01-01

    For efficient management of the railway direction, it was proposed to create a predictive model of the train operation. One of the components of this model is the train arrival module, designed to determine the arrival time of different trains to technical stations of the railway direction. The train arrival module is proposed to build based on a neural network, which using statistical information for prior periods and the train data obtained in real time, determines the train arrival time at...

  4. Academic involvement in shift technical advisor training for the utilities

    International Nuclear Information System (INIS)

    One of the clearest conclusions reached of nearly every commission and panel formed in response to the Three Mile Island accident was the desirability of upgrading the educational background of those persons with direct operational responsibility in a nuclear power plant. The long term objective is for all shift supervisors to have engineering degrees as well as NRC senior operating licenses. In the interim, the utilities are required to provide in-depth engineering expertise on every shift in the person of a Shift Technical Advisor (STA). The training of STA's is complicated by the requirement to have college level instruction in plant specific topics which are not typically included in the curricula of degree-granting instructions. One possible response to this challenge is presented

  5. Nuclear instrument maintenance and technical training in Nuclear Energy Unit

    International Nuclear Information System (INIS)

    Instrument maintenance service is a necessity in a Nuclear Research Institute, such as the Nuclear Energy Unit (NEU) to ensure the smooth running of our research activities. However, realising that maintenance back-up service for either nuclear or other scientific equipment is a major problem in developing countries such as Malaysia, NEU has set up an Instrumentation and Control Department to assist in rectifying the maintenance problem. Beside supporting in house activities in NEU, the Instrumentation and Control Department (I and C) is also geared into providing services to other organisations in Malaysia. This paper will briefly outline the activities of NEU in nuclear instrument maintenance as well as in technical training. (author)

  6. CERN, Geneva

    CERN Multimedia

    2007-01-01

    "The Large Hadron Collider (pages 1-3) is being built at CERN, the European Centre for Nuclear Research near Geneva. CERN offers some extremely exciting opportunities to see "big bang" in action. (1 page)

  7. Energy Assurance Technical Training and Awareness Program/Energy Infrastructure Training and Analysis Center

    Energy Technology Data Exchange (ETDEWEB)

    Barbara McCabe

    2005-11-15

    This report covers the work completed during Year One (Year One has a 16 month project period) of a five- year Cooperative Agreement (DE-FC26-03NT41895) between the International Union of Operating Engineers (IUOE) National Hazmat Program (OENHP) and the U. S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). This final technical report is being submitted, as required by the Cooperative Agreement, within 90 (calendar) days after the project period ends (December 31, 2004). The resources allocated to Year One of the Cooperative Agreement were adequate for the completion of the required deliverables. All deliverables have been completed and sent to AAD Document Control as directed in the cooperative agreement. The allocation for Year One required 20-25 trainers to be trained in each of five Train-the-Trainer courses and a total of 6,000 workers trained throughout the country. Through cost savings employed for the scheduling and conduct of Train-the-Trainer, instructor refreshers, and direct training classes, 3171 workers have been trained to date. This total incorporates 159 trainers and members from management, local, county, state and federal organizations identified in the Strategic Plan. The largest percentage of personnel trained is heavy equipment operators, and building engineers, which is the largest targeted population identified under this cooperative agreement. The OENHP, using existing curriculum as appropriate, has modified and developed new training modules that have been used to establish four different levels of training courses. The four courses are: (1) EA 500 Energy Assurance Train-the-Trainer, (2) EA 400 Energy Assurance Instructor Refresher, (3) EA 300 Energy Assurance, and (4) EA 100 Energy Assurance Awareness. Training modules cover topics, such as, but not limited to, facility vulnerability and vulnerability assessment, physical security- heating, ventilation, air conditioning, terrorism awareness, weapons of mass

  8. Repositioning Technical and Vocational Education and Training (TVET) for Youths Employment and National Security in Nigeria

    Science.gov (United States)

    Ogbunaya, T. C.; Udoudo, Ekereobong S.

    2015-01-01

    The paper focused on repositioning Technical and Vocational Education and Training (TVET) for youth's employment and national security in Nigeria. It examined briefly the concepts of technical vocational education and training (TVET), youths, unemployment and national security as well as the effects of unemployment on national security in Nigeria.…

  9. Technical and Vocational Education and Training in Peace Education: Solomon Islands

    Science.gov (United States)

    Maebuta, Jack

    2011-01-01

    Technical and vocational education and training programs as a form of peace education are examined in this paper. It explores the notion of educating for a culture of peace through refocusing technical and vocational education and training programs on sustainable community development in the Solomon Islands. It further highlights the policy and…

  10. Proposal for outline of training and evaluation method for non-technical skills

    International Nuclear Information System (INIS)

    The purpose of this study is to systematize measures for improvement of emergency response capability focused on non-technical skills. As the results of investigation of some emergency training in nuclear power plant and referring to CRM training, following two issues were picked up. 1) Lack of practical training method for improvement of non-technical skills. 2) Lack of evaluation method of non-technical skills. Then, based on these 7 non-technical skills 'situational awareness' 'decision making' 'communication' 'teamworking' 'leadership' 'managing stress' 'coping with fatigue' are promotion factors to improve emergency response capability, we propose practical training method for each non-technical skill. Also we give example of behavioral markers as evaluation factor, and indicate approaches to introduce the evaluation method of non-technical skills. (author)

  11. Features of the technical training athletes with hearing impaired in various sports

    Directory of Open Access Journals (Sweden)

    Khurtyk D.V.

    2012-09-01

    Full Text Available It was analysed scientific-methodical and specialized literature on adaptive sports: table tennis, basketball, judo, skiing. It is conducted interviews with leading coaches working in the Deaflympic sport. Monitor the training process of elite athletes with hearing impairments, specializing in ski racing. Found that for technical training of athletes use the principle of learning the exercises and improvement from simple to complex with the rote. It was shown the necessity of attracting able-bodied athletes in the training process deflimpiytsev to optimize their technical training. The data obtained allow us to determine the direction of improving the technical skills of this category of athletes.

  12. CERN: Digitally open, too

    CERN Multimedia

    Computer Security Team

    2013-01-01

    The Open Days are here!! From tomorrow onwards, we will be welcoming thousands of people to CERN. No barriers, no boundaries!   For decades, we have welcomed researchers and visitors from around the world to work at CERN, discuss physics research and attend our training sessions, lectures and conferences. This is how fundamental research should be conducted!!! But have you ever noticed how you are welcome at CERN in the digital world, too? Once you are affiliated and are registered with CERN, you receive a CERN computing account and e-mail address.  You can register your laptops, PCs and smartphones to use our (wireless) network, you can easily create your personal webpage, and profit from a vast disk space for file storage (AFS and DFS). CERN is indeed an Open Campus and not only during the Open Days. CERN is an Open Campus in the digital world. This digital Open Campus culture is exactly the reason why “computer security” has been dele...

  13. Structure and physical technical and tactical training handball players aged 10-11 years

    OpenAIRE

    Palagin A.A.

    2014-01-01

    Purpose: to study the structural and functional relationships, physical, technical and tactical training handball aged 10-11 years. Material: the study involved 20 handball players aged 10-11 years. Results: isolated and subjected to review 55 correlations between speed, speed-strength, coordination skills and basic technical and tactical methods of the game. Consider the correlation matrix structure level of physical, technical and tactical training to handball pedagogical experiment. Found ...

  14. Scientific Information Service at CERN

    CERN Document Server

    Pereira, Margarida

    2016-01-01

    Dissemination of information is an essential part of CERN's mission. It brings people together from all around the world and trains the scientists of tomorrow. CERN scientific output is documented and made available for the scientific community and the general public through the CERN Document Server, INSPIRE-HEP and Wikipedia. This report presents the work done in the Scientific Information Service during the summer student program.

  15. DOE Handbook: Guide to good practices for training of technical staff and managers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    Training programs at DOE facilities should prepare personnel to safely and efficiently operate the facilities in accordance with DOE requirements. This guide contains information that can be used to develop or validate training programs for technical staff and managers at DOE nuclear facilities. Training programs based on the content of this guide should provide assurance that these personnel perform their jobs safely and competently.

  16. DOE Handbook: Guide to good practices for training of technical staff and managers

    International Nuclear Information System (INIS)

    Training programs at DOE facilities should prepare personnel to safely and efficiently operate the facilities in accordance with DOE requirements. This guide contains information that can be used to develop or validate training programs for technical staff and managers at DOE nuclear facilities. Training programs based on the content of this guide should provide assurance that these personnel perform their jobs safely and competently

  17. CERN's Guardian Angels

    CERN Multimedia

    2002-01-01

    Any trouble at CERN? The Technical Control Room operates the entire technical infrastructure of CERN every day, all year long. They deal with problems that go from simple water leaks to devastating power cuts.   The Technical Control Room with Kenneth Olesen and Mark Harvey, minutes before their starting time. This big room is probably the liveliest at CERN, since there's always someone there, everyday, all year long. Laurent Randot and Eric Lienard working in the Technical Control Room at CERN in building 212. They've started at 7 a.m. and today has been a relatively quiet day. There have been some microcuts in the electric net because of the wind. But these have been repaired rather quickly... The relief: It's 2.30 p.m. Time for Laurent Randot and Eric Lienard to show their colleagues Mark Harvey and Kenneth Olesen what has been going on during the morning. They are the next TCR team of the day. Mark Harvey and Kenneth Olesen start their working day. They will work until 11p.m., when another team wil...

  18. The effects of combined technics training on some physical strength and technical features that is applied to basketball players

    Directory of Open Access Journals (Sweden)

    Fatih Kılınç

    2011-01-01

    Full Text Available Normal 0 21 false false false TR X-NONE X-NONE MicrosoftInternetExplorer4 Aim, it is the research about the effects of  combined technics traınıng on some physical, strength and technical features  that is applied to basketball players who are in basic  technich  development . Method, twenty-five (n:25 male volunteers  attended to this research who are the students of primary school.Two group was formed. The  first group went into combined technics training (KTA n.13, age 9.7+/-0.4 year, height 142.7+/-5.8cm, body weight 34+/-5.2 kg, the second group went into normal technics training (NTA n.12, age 10.5+/-0.5 year, height 147.7+/-0.5 cm, body weight 38.1+/-0.7 kg it is organised like this. Measurement of the physical environment, vertical jump test, right-left hand gripping strength, back strength, the basic technich tests (dribbling,changing hands from behind, reverse,  right–left  tourniquet were done. Training was programmed to be in eight weeks, five days in a week and 1.5 hour. Two  tests were applied to the children before and after the training. Descriptive statistics and t-test  were performed from the data that was obtained through the research. Findings, among the test measurment results after training  important  differences were found between combined technical training group (KTA and normal technical training group (NTA in arm, double-leg vertical jump, left-right one foot vertical jump as well as  the technical tests such as (dribbling, changing hands behind, reverse, right-left tourniquet (p<0.05. Results, in terms of  technical development in basketball, combined technical group (KTA had a very important degree of development. Basketball players have also developed the technical testing of computer-aided analysis program can be a practical field conditions can be reported.

  19. CERN welcomes European science

    CERN Multimedia

    2002-01-01

    On 3 and 4 October CERN will host a special workshop for Marie Curie fellows. This programme is a key plank in the EU's strategy for creating a European research area.     With thousands of scientists from all over the continent working together, CERN is already an exemplary European science showcase. On 3 and 4 October, the Laboratory will contribute further to unifying all European science by hosting a special workshop for EU-funded Marie Curie fellows. This scheme gives young researchers from around the continent the mobility to go to wherever Europe's best facilities in their chosen field happen to be. The event that will take place at CERN, entitled 'Special workshop of Marie Curie Fellows on research and training in physics and technology', organised together with the European Commission, is a continuation of a series of workshops with the aim, among others, of promoting young researchers, supporting their training and mobility, and facilitating the interdisciplinary dissemination of knowledge. Dur...

  20. CERN Choir

    CERN Multimedia

    Staff Association

    2015-01-01

      Do you like singing? The CERN Choir is looking for basses and tenors Join us! Programme Spring Session 2015: Donizetti: Misere & Missa di Gloria e Credo Bellini: Salve Regina Bruckner: Requiem in D minor Next concert: Sunday 31 May 2015 at 17:00 Musicales de Comesières (GE) Rehearsals at CERN Main Auditorium, building 500 On Wednesdays from 20.00 to 22:00 Membership fee: January to June 150 CHF September to December: 100CHF Contact: Baudouin.bleus@cern.ch Facebook/Choeur-du-CERN

  1. CERN videonews magazine Nr 3 : January 2003

    CERN Multimedia

    Audiovideo service

    2003-01-01

    News from : The Director General talks about the outcome of the December Council meeting. (CERN Bulletin 03/2003) DELPHI : a new home for the barrel. CERN firemen : a report on their spectacular training programme. (CERN Bulletin 51-52/2002/01-02/2003) 1954 : a vintage video news clip.

  2. Nuclear Criticality Safety Organization guidance for the development of continuing technical training. Revision 1

    International Nuclear Information System (INIS)

    The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of highly qualified personnel to meet the current and anticipated needs in nuclear criticality safety at the Oak Ridge Y-12 Plant and throughout the DOE complex. Continuing technical training is training outside of the initial qualification program to address identified organization-wide needs. Typically, this training is used to improve organization performance in the conduct of business. This document provides guidelines for the development of the technical portions of the Continuing Training Program. It is not a step-by-step procedure, but a collection of considerations to be used during the development process

  3. Apprenticeship at CERN

    CERN Multimedia

    Staff Association

    2016-01-01

    In 1961, based on the finding that the evolution of the labour market created a growing need for qualified staff, a first agreement between the Republic and Canton of Geneva and CERN was signed. One of the objectives of this agreement was the vocational training of young electronics and physics laboratory technicians. CERN, an important stakeholder in the local economy, highlighted with this agreement its willingness to participate in the local social and economic development. The first apprentice arrived at CERN in 1965. In 1971, the apprenticeship centre was created; it now hosts over twenty apprentices in total and welcomes about six new apprentices each year. These apprenticeships are for young people aged between 15 and 21 years, coming from one of the CERN Member States, and having completed their mandatory education, e.g. 11th grade in Switzerland or 3ème in France. The training is divided between working time at CERN and one or two days per week at school (CFPT in Geneva for electronics or ...

  4. Courrier CERN

    CERN Multimedia

    2015-01-01

    Example of the cover page of the French version of the CERN Courier; Courrier CERN from January 1962. The journal was published both in English and French up to volume 45, no. 5, June 2005. Since then there is a single-language edition where articles are published either in French or English with an abstract in the other language.

  5. The improvement of technical preparation of sprinters on the initial stage of sport training

    Directory of Open Access Journals (Sweden)

    Maleniuk T.V.

    2010-05-01

    Full Text Available Directions of perfection of technical preparation of sprinters are examined on the initial stage of the sporting training. The basic elements of technique at run are certain 100 meters. The system of criteria of estimation of technical preparedness of sprinters is developed. The certain lacks of technical preparedness are exposed. The method of improvement of technical preparation is developed and its efficiency is tested. The system of criteria of estimation of technical preparedness of sprinters is developed. A general tendency is exposed to their finding on middle, above average and to high levels.

  6. Technical Training on High-Order Spectral Analysis and Thermal Anemometry Applications

    Science.gov (United States)

    Maslov, A. A.; Shiplyuk, A. N.; Sidirenko, A. A.; Bountin, D. A.

    2003-01-01

    The topics of thermal anemometry and high-order spectral analyses were the subject of the technical training. Specifically, the objective of the technical training was to study: (i) the recently introduced constant voltage anemometer (CVA) for high-speed boundary layer; and (ii) newly developed high-order spectral analysis techniques (HOSA). Both CVA and HOSA are relevant tools for studies of boundary layer transition and stability.

  7. CERN firemen share their expertise

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    Firemen from local fire brigades have been coming to CERN to learn modern fire-fighting techniques. The CERN firemen have some unique training equipment for two particularly dangerous fire hazards, flashover and backdraft. Backdraft occurs when a fire smoulders for a long time within a confined space. The gases produced by the embers fail to burn owing to a lack of oxygen. When the door of the room is opened, for example, the resulting inflow of oxygen causes a deflagration that may prove fatal. This series of photos shows the use of special apparatus to simulate the spectacular backdraft phenomenon, so that firemen training at CERN learn to understand it.

  8. Guide to good practices for the selection, training, and qualification of shift technical advisors

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-02-01

    The DOE Guide to Good Practices For the Selection, Training, and Qualification of Shift Technical Advisors can be used by any DOE nuclear facility that has implemented the shift technical advisor (STA) position. DOE Order 5480.20A, Personnel Selection, Qualification and Training Requirements for DOE Nuclear Facilities, states that only Category A reactors must have a shift technical advisor. However, many DOE nuclear facilities have implemented the shift technical advisor position to provide independent on-shift technical advice and counsel to the shift operating personnel to help determine cause and mitigation of facility accidents. Those DOE nuclear facilities that have implemented or are going to implement the shift technical advisor position will find this guide useful. This guide addresses areas that may be covered by other training programs. In these cases, it is unnecessary (and undesirable) to duplicate these areas in the STA training program as long as the specific skills and knowledge essential for STAs are addressed. The guide is based on the premise that the trainee has not completed any facility-specific training other than general employee training.

  9. Guide to good practices for the selection, training, and qualification of shift technical advisors

    Energy Technology Data Exchange (ETDEWEB)

    1993-02-01

    The DOE Guide to Good Practices For The Selection, Training, and Qualification of Shift Technical Advisors can be used by any DOE nuclear facility that has implemented the shift technical advisor position. DOE Order 5480-20, ``Personnel Selection, Qualification, Training, and Staffing Requirements at DOE Reactor and Non-Reactor Nuclear Facilities,`` states that only Category A reactors must use shift technical advisor position. However, many DOE nuclear facilities have implemented the shift technical advisor position to provide independent on-shift technical advice and counsel to the shift operating personnel to help determine cause and mitigation of facility accidents. Those DOE nuclear facilities that have implemented or are going to implement the shift technical advisor position will find this guide useful. This guide addresses areas that may be covered by other training programs. In these cases, it is unnecessary (and undesirable) to duplicate these areas in the STA training program as long as the specific skills and knowledge essential for STAs are addressed. The guide is presented based on the premise that the trainee has not completed any facility-specific training other than general employee training.

  10. The Effects of Integrating On-Going Training for Technical Documentation Teams

    Science.gov (United States)

    Catanio, Joseph T.; Catanio, Teri L.

    2010-01-01

    The tools and techniques utilized in the technical communications profession are constantly improving and changing. Information Technology (IT) organizations devote the necessary resources to equip and train engineering, marketing, and sales teams, but often fail to do so for technical documentation teams. Many IT organizations tend to view…

  11. Training of technical staff for nuclear power stations

    International Nuclear Information System (INIS)

    Nine papers presented at the Seminar are printed. All are indexed separately. Two of the papers cover the facilities and training programmes for British naval personnel operating powered submarines. Four are concerned with the Central Electicity Board's training of nuclear power plant personnel, one specifically for the Hinckley Point-B reactor. Italian and Swedish nuclear power plant operator training programmes are reviewed in the other two papers. (U.K.)

  12. Briefing Paper regarding the Establishment of a Regional Technical and Industrial Skills Training Center.

    Science.gov (United States)

    Powell, Roger Baden

    In spring 1997, Oregon's Regional Workforce Committee commissioned a study to investigate the feasibility of creating a technical and industrial skills training center in Region 12 of the state. Interviews were conducted with 40 individuals from area companies, social service agencies, and training organizations regarding the need for such a…

  13. Improvement of technical and tactical training of judoists at the stage of leaving high performance sport

    Directory of Open Access Journals (Sweden)

    Ananchenko Konstantin

    2016-02-01

    Full Text Available The object of the study made by the authors is the training and competition process of judoists at the stage of leaving high performance sport. The subject of the study is individual approach to organizing technical-tactical preparation of judoists-veterans as a means of improving the efficiency of the training process. The article substantiates the directions of perfection of judoists’ training activity management at the stage of leaving high performance sport

  14. CERN Rocks

    CERN Multimedia

    2004-01-01

    The 15th CERN Hardronic Festival took place on 17 July on the terrace of Rest 3 (Prévessin). Over 1000 people, from CERN and other International Organizations, came to enjoy the warm summer night, and to watch the best of the World's High Energy music. Jazz, rock, pop, country, metal, blues, funk and punk blasted out from 9 bands from the CERN Musiclub and Jazz club, alternating on two stages in a non-stop show.  The night reached its hottest point when The Canettes Blues Band got everybody dancing to sixties R&B tunes (pictured). Meanwhile, the bars and food vans were working at full capacity, under the expert management of the CERN Softball club, who were at the same time running a Softball tournament in the adjacent "Higgs Field". The Hardronic Festival is the main yearly CERN music event, and it is organized with the support of the Staff Association and the CERN Administration.

  15. Final Technical Report. Training in Building Audit Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Brosemer, Kathleen [Sault Sainte Marie Tribe of Chippewa Indians, Marie, MI (United States)

    2015-03-27

    In 2011, the Tribe proposed and was awarded the Training in Building Audit Technologies grant from the DOE in the amount of $55,748 to contract for training programs for infrared cameras, blower door technology applications and building systems. The coursework consisted of; Infrared Camera Training: Level I - Thermal Imaging for Energy Audits; Blower Door Analysis and Building-As-A-System Training, Building Performance Institute (BPI) Building Analyst; Building Envelope Training, Building Performance Institute (BPI) Envelope Professional; and Audit/JobFLEX Tablet Software. Competitive procurement of the training contractor resulted in lower costs, allowing the Tribe to request and receive DOE approval to additionally purchase energy audit equipment and contract for residential energy audits of 25 low-income Tribal Housing units. Sault Tribe personnel received field training to supplement the classroom instruction on proper use of the energy audit equipment. Field experience was provided through the second DOE energy audits grant, allowing Sault Tribe personnel to join the contractor, Building Science Academy, in conducting 25 residential energy audits of low-income Tribal Housing units.

  16. Co-operation Agreement between the Ministry of Science, Technology and Environment of the Republic of Cuba (CITMA) and CERN concerning The Further Development of Scientific and Technical Co-operation

    CERN Document Server

    2003-01-01

    In the framework of the CERN collaboration with Latin America, co-operation agreements have been established with Argentina, Brazil, Colombia, Chile, Mexico and Peru. They have made possible a growing participation by Latin American particle physicists in the CERN programme, which has important potential for the future. The Cuban particle physics community is highly motivated and relatively advanced, both scientifically and technologically, since many of its members have been trained in installations of the former Soviet Union, many of which now participate in CERN's cooperation with Russia. In addition, Cuba has a good number of experienced computer scientists. A group from the Cuban Institute CEADEN (Centro de Aplicaciones Tecnológicas y Desarollo Nuclear) has recently been accepted unanimously into the ALICE collaboration, with agreed contributions to off-line software and Grid middlewave. Additional Cuban contributions to show controls, data acquisition and testing electronics for the Silicon drift decte...

  17. Italy at CERN, from 16 to 19 November 1999

    CERN Multimedia

    Patrice Loiez

    1999-01-01

    The Italian Minister of Research, Ortensio Zecchino, opened the exhibition on Tuesday 16 November together with CERN's Director General, Professor Luciano Maiani. Photo 17: (Left to right) CERN director-general Luciano Maiani, Italian Minister of Research Ortensio Zecchino, CERN Technical Support Division leader Alberto Scaramelli, CERN Supplies, Procurement and Logistics Division Leader Romeo Perin, CERN-Italy industrial liaison officer Lucio Rossi and high-precision press tool manufacturer Malvestiti SPA director G Malvestiti.

  18. 21 May 2013 - Greek Minister of Health A. Lykouretzos signing the guest book with CERN Director-General R. Heuer; visiting the LHC tunnel at POint 5 and CMS experimental cavern with Deputy Spokesperson T. Camporesi. CERN-HERMES Network Technical Coordinator E. Dimovasili; Life Sciences Adviser M. Dosanjh; National Contact Physicist, ATLAS Collaboration, NTU, Athens E. Gazis and International Relations Adviser R. Voss accompany the delegation throughout.

    CERN Multimedia

    Anna Pantelia

    2013-01-01

    21 May 2013 - Greek Minister of Health A. Lykouretzos signing the guest book with CERN Director-General R. Heuer; visiting the LHC tunnel at POint 5 and CMS experimental cavern with Deputy Spokesperson T. Camporesi. CERN-HERMES Network Technical Coordinator E. Dimovasili; Life Sciences Adviser M. Dosanjh; National Contact Physicist, ATLAS Collaboration, NTU, Athens E. Gazis and International Relations Adviser R. Voss accompany the delegation throughout.

  19. National Planning of Vocational and Technical Training, 1972.

    Science.gov (United States)

    Colombo Plan Bureau (Sri Lanka).

    This document contains the proceedings of the fifth of a series of seminars developed by the Colombo Plan Bureau to serve as a catalyst in the planning and development of skilled manpower in the Colombo region of south and southeast Asia. The seminars resulted from a realization that the shortage of technical and skilled manpower in the area is…

  20. The Technical Student Programme draws Norwegians

    CERN Multimedia

    2005-01-01

    Erik Hejne, second from left, Chairman of the Technical Students Committee, and Jens Vigen, who is concerned spefically with Norwegian students at CERN, with some of the Norwegian technical students who arrived at CERN in spring 2005, together with their teachers. From mid-April, CERN's PH and IT Departments are hosting ten Norwegian students from Bergen University College, the Sør-Trøndelag University College and the University of Science and Technology in Trondheim to take part in the Laboratory's Technical Student Programme. The Technical Student Programme is open to students of universities and technical higher education establishments in the Member States who, in the course of their studies, are required to complete a period of professional training in industry or in a laboratory. Around 70 Technical Students come to work at CERN each year. Selected by a committee, they spend between six months and one year with the Organization. The programme is funded by CERN. However, once the Laboratory's quota of...

  1. CERN firemen share their expertise

    CERN Document Server

    Maximilien Brice

    2002-01-01

    Firemen from local fire brigades have been coming to CERN to learn modern fire-fighting techniques. The CERN fire brigade has some unique training equipment for two particularly dangerous fire hazards, flashover and backdraft. Flashover occurs when a room that is on fire reaches a temperature of 400 to 500°. Beyond this point, a fully developed fire breaks out. This series of photos shows recruits from the fire services of Ain (Service Départemental Incendie et Secours (SDIS)) taking part in a flashover training exercise at CERN. Photo 01: Christopher Griggs, Chief Instructor of the CERN fire brigade (seated in the centre), explains the technique of using a fire-hose during a flashover to the recruits from the Ain SDIS.

  2. Live Webcast from CERN - Mission Impossible 3?

    CERN Multimedia

    2000-01-01

    It is a beautiful sunny autumn day, 21 November 2000. The place is CERN's Microcosm exhibition where around 50 pupils from the International School in Geneva and the Collège du Leman have gathered to dive into the mystery of antimatter production and take part in CERN's second Live Webcast of the series 'The Antimatter Factory'. The first was broadcast on 18 November. The webcast is played in the mood of Mission Impossible with music and teasers from this famous television and cinema series. The mission here is not to save the planet but to understand how and why antimatter is produced at CERN. In the Webcast studio, Paola Catapano, Rolf Landua and Mick Storr answer questions posed by students in Italy and Finland thanks to video-conferencing. Paola Catapano, Visit and Exhibitions group leader, dressed like a Bond girl Rolf Landua, spokesman of the ATHENA experiment and Mick Storr Head of Technical Training lead the show. The place starts buzzing and we peep into the antimatter factory (AD) and a...

  3. Model technical and tactical training karate «game» manner of conducting a duel

    Directory of Open Access Journals (Sweden)

    Natalya Boychenko

    2015-04-01

    Full Text Available Purpose: optimization of technical and tactical training karate «gaming» the manner of conducting a duel. Material and Methods: analysis and compilation of scientific and methodological literature, interviews with coaches for shock combat sports, video analysis techniques, teacher observations. Results: the model of technical and tactical training karate «game» manner of conducting a duel. Selection was done complexes jobs matching techniques to improve athletes 'game' in the manner of conducting a duel «Kyokushin» karate. Conclusion: the model of technical and tactical training fighters "game" manner of conducting a duel, which reveals the particular combination technique karate style «Kyokushin». Selection was done complexes jobs matching techniques to improve athletes 'game' in the manner of conducting a duel «Kyokushin» karate, aimed at improving the combinations with the action on the response of the enemy.

  4. Places available - Technical training (up to the end of 2015)

    CERN Multimedia

    2015-01-01

    Please find below all the upcoming courses (until December) that are currently missing participants, required for the courses to take place.     *Click on the picture*   For more details about a course and to register, please go to the Training Catalogue.

  5. The Technical Training Programme for Nuclear Power Station Personnel

    International Nuclear Information System (INIS)

    Canada's Nuclear Power Demonstration station (NPD), initiated by the federal agency Atomic Energy of Canada Limited, is operated and staffed by the Hydro-Electric Power Commission of Ontario, a provincial public utility. Obtaining and training staff for the station was hampered by the fact that until recently most of Ontario's electricity requirements were supplied by the abundant hydro-electric resources of the province. Increasing use of thermal-electric energy since 1950 created an extreme shortage of staff experienced in the operation of thermal stations. To meet this situation, trained manpower for nuclear generating stations was developed by the following steps: (1) An initial group of professional engineers was selected from among persons with considerable experience in nuclear work, thermal stations and electrical operation; (2) Another group of highly experienced operators and maintainers was selected; (3) The selected groups were given a rigorous training programme involving operation of both nuclear and coal-fired stations, instruction from the designers of NPD and training in the classroom and on the job; and (4) A nuclear training centre was established to select and train additional staff, conduct formal examinations and be generally responsible for personnel quality standards. Independent examinations of personnel were conducted by the Atomic Energy Control Board, a separate federal regulatory agency. Five general categories of personnel are being developed: (1) Supervisors: professional engineers responsible for operation, maintenance and administrative supervision, rotated periodically to increase their versatility; (2) Operators: four levels of qualification depending on the requirements of the job; (3) Control maintainers: four levels of qualification, responsible for maintenance of all instruments, control equipment and electrical equipment; (4) Mechanical maintainers: various levels and combinations of skills (welding, machining, fitting, etc

  6. 浅谈班组技术培训%Talking about the team technical training

    Institute of Scientific and Technical Information of China (English)

    杨文进

    2011-01-01

    Focusing on the phenomena that not understanding the importance of technical training, the unitary of activity way and flow at the form is prevalent in power team. The development method and cautions of the team technical training are described emphatically.%针对电力班组普遍存在的对技术培训重要性认识不足,活动方式简单一,流于形式的现象,着重阐述了班组技术培训开展方法及注意事项。

  7. Gaze training enhances laparoscopic technical skill acquisition and multi-tasking performance: A randomized, controlled study

    OpenAIRE

    Wilson, Mark R; Vine, Samuel J.; Bright, Elizabeth; Masters, Rich S. W.; Defriend, David; McGrath, John S

    2011-01-01

    Background: The operating room environment is replete with stressors and distractions that increase the attention demands of what are already complex psychomotor procedures. Contemporary research in other fields (e.g., sport) has revealed that gaze training interventions may support the development of robust movement skills. This current study was designed to examine the utility of gaze training for technical laparoscopic skills and to test performance under multitasking conditions. Methods: ...

  8. Age biased technical and organisational change, training and employment prospects of older workers

    OpenAIRE

    Behaghel, Luc; Caroli, Eve; Roger, Muriel

    2011-01-01

    We analyse the role of training in mitigating the negative impact of technical and organizational changes on the employment prospects of older workers. Using a panel of French firms in the late 1990s, we first estimate wage bill share equations for different age groups. Consistently with what is found in the literature, we find that adopting new technologies and innovative work practices negatively affects the wage bill share of older workers. In contrast, training older workers more than ave...

  9. Robot adventures at CERN

    CERN Multimedia

    2015-01-01

    Imagine if the CERN robots had an end-of-year party... From retrieving data tapes to handling material safely, the robots at CERN fulfill numerous tasks. Find out more: http://cern.ch/go/VjX7 Produced by: CERN Video Productions Director: Christoph M. Madsen Copyright © 2015 CERN. Terms of use: http://copyright.web.cern.ch/

  10. CERN apprenticeship scheme honoured

    CERN Multimedia

    2008-01-01

    Prestigious awards for two apprentices who did their practical training at CERN. Sylvain Heinzen, apprentice physics lab technician at CERN, receiving his award from Pierre-François UNGER, State Councillor responsible for the Federal Department of the Economy and Health. The other award-winner, Cédric Gerber, is on the right of the photo.Among Geneva’s top apprentices who were honoured by the Fondation sociale de l’Union industrielle genevoise (UIG) on 28 October this year, were two CERN apprentices. Electronics technician Cédric Gerber and physics lab technician Sylvain Heinzen both did their four-year sandwich course at CERN, obtaining their professional qualification, the Certificat fédéral de capacité (CFC), in June. On top of that, Cédric Gerber, who had been a particularly outstanding apprentice, received two further distinctions at the CFC awards ceremony - the State Council prize for achieving one of the top-ten o...

  11. CERN choir

    CERN Document Server

    2004-01-01

    Don't forget a special performance of Joseph Haydn's Creation, an oratorio in three parts, given by the CERN choir and the Annecy choir Pro Musica, this Sunday at 8.30 p.m. at the Grand Casino. Tickets (38 CHF) are available at Fnac Rive and Balexert.

  12. News Conference: Physics brings the community together Training: CERN trains physics teachers Education: World conference fosters physics collaborations Lecture: Physics education live at ASE Prize: Physics teacher wins first Moore medal Festival: European presidents patronize Science on Stage festival Videoconference: Videoconference brings Durban closer to the classroom

    Science.gov (United States)

    2012-03-01

    Conference: Physics brings the community together Training: CERN trains physics teachers Education: World conference fosters physics collaborations Lecture: Physics education live at ASE Prize: Physics teacher wins first Moore medal Festival: European presidents patronize Science on Stage festival Videoconference: Videoconference brings Durban closer to the classroom

  13. Cooperation between CERN and ITER

    CERN Multimedia

    2008-01-01

    CERN and the International Fusion Organisation ITER have just signed a first cooperation agreeement. Kaname Ikeda, the Director-General of the International Fusion Energy Organisation (ITER) (on the right) and Robert Aymar, Director-General of CERN, signing the agreement.The Director-General of the International Fusion Energy Organization, Mr Kaname Ikeda, and CERN Director-General, Robert Aymar, signed a cooperation agreement at a meeting on the Meyrin site on Thursday 6 March. One of the main purposes of this agreement is for CERN to give ITER the benefit of its experience in the field of technology as well as in administrative domains such as finance, procurement, human resources and informatics through the provision of consultancy services. Currently in its start-up phase at its Cadarache site, 70 km from Marseilles (France), ITER will focus its research on the scientific and technical feasibility of using fusion energy as a fu...

  14. Experience with training of technical personnel and worker occupations in concern's nuclear power plants

    International Nuclear Information System (INIS)

    The principles and main criteria of the education of operating personnel of nuclear power plants are presented as is their enshrinement in certain decisions of the Czechoslovak government and of the Central Committee of the Communist Party of Czechoslovakia. The concept is briefly described of the training of workers and technical personnel in operation, maintenance and repair units of nuclear power plants, in vocational training centres, and specialized training. The newly established apprenticeships are discussed. Also given are the numbers of apprentices and qualified personnel in the years 1976 - 1982. (B.S.)

  15. Fitness for accident management through NPP personnel training, simulators and technical support

    International Nuclear Information System (INIS)

    The contributions within the context of accident management of the Siemens A G-Power Generation Group Crisis Centre and the Siemens A G Training Centre are described. The Crisis Centre provides direct technical consulting to NPPs from experts in design and engineering. Training of NPP personnel is here outlined with particular emphasis on the use of simulators in getting practice of emergency handling and on development of documentation and operating procedures. It is pointed to projects to the introduction of these services in Eastern NPPs and training facilities

  16. For a new challenge: Jobs @ CERN

    CERN Multimedia

    HR Department

    2009-01-01

    Did you realise that there are often new opportunities in many areas at CERN? Take a look at the HR website and spread the word! Currently there are positions open in the following activities: 5 Physicists / 26 Engineers / 7 Technical Engineers / 23 Technicians / 15 Administrative work For further information and to apply, please go to: http://www.cern.ch/jobs HR Department

  17. Exposition sur la Fusion au CERN

    CERN Multimedia

    CERN Press Office. Geneva

    1993-01-01

    The fifth in a series of exhibitions at CERN presenting European research activities will be open to the public from 23 July to 11 September. CERN has invited the European Atomic Energy Community (Euratom) to present an overview of present research and technical developments in the field of thermonuclear fusion in Europe and elsewhere in the world.

  18. Technical Training in the MNCs in Malaysia: A Case Study Analysis of the Petrochemical Industry

    Science.gov (United States)

    Hooi, Lai Wan

    2010-01-01

    Purpose: The aim of this paper is to gain insight into some of the types of training and development practices that are carried out in the chemical industry for technical workers. A salient focus of the study is to make a comparative analysis of four MNCs, which were selected based on equity ownership, to ascertain whether T&D practices are…

  19. Structure and physical technical and tactical training handball players aged 10-11 years

    Directory of Open Access Journals (Sweden)

    Palagin A.A.

    2014-06-01

    Full Text Available Purpose : to study the structural and functional relationships, physical, technical and tactical training handball aged 10-11 years. Material : the study involved 20 handball players aged 10-11 years. Results : isolated and subjected to review 55 correlations between speed, speed-strength, coordination skills and basic technical and tactical methods of the game. Consider the correlation matrix structure level of physical, technical and tactical training to handball pedagogical experiment. Found that 55 of the 15 correlations calculated (27.3% positive and 12 (21.81 % of negative relationships were statistically significant. It is 49.08 % of the linkages (r = 0.54 to 0.85. Correlations allow to evaluate the effectiveness of the training process under the influence of specific funds targeted at individual components of motor abilities and techniques of the game. Conclusions : methodological recommendations, technology and program start-up phase of preparation of young handball players. The program aims at the development of the dual physical and technical and tactical training.

  20. Determinants of Entrepreneurial Intentions: Technical-Vocational Education and Training Students in Ethiopia

    Science.gov (United States)

    Buli, Bereket Mamo; Yesuf, Wasihun Mohammed

    2015-01-01

    Purpose: The purpose of this paper is to examine factors that could explain the difference in entrepreneurial intention (EI) among technical-vocational education and training (TVET) program students. Centered on the theory of planned behavior (TPB), the paper aims to contribute to the understanding of factors that affect EIs of students and offer…