WorldWideScience

Sample records for cern ps booster

  1. Observation of coherent instability in the CERN PS Booster

    CERN Document Server

    McAteer, M; Forte, V; Rumolo, G; Tomás, R

    2014-01-01

    At high intensities and at certain working points, an instability develops in the CERN PS Booster and large coherent transverse oscillations and beam loss occur [1]. The coherent oscillations and beam loss can be effectively controlled with the transverse damper system, but the origin of the instability is not well understood. In preparation for nonlinear optics measurements in the PS Booster that will take place after CERN’s first Long Shutdown, trial measurements were made with the PSB’s new trajectory measurement system. The measurements gave some new insight into the nature of this transverse instability, and these observations are presented here.

  2. Linac4, a New Injector for the CERN PS Booster

    CERN Document Server

    Garoby, R; Gerigk, F; Hanke, K; Lombardi, A; Pasini, M; Rossi, C; Sargsyan, E; Vretenar, M

    2006-01-01

    The first bottle-neck towards higher beam brightness in the LHC injector chain is due to space charge induced tune spread at injection into the CERN PS Booster (PSB). A new injector called Linac4 is proposed to remove this limitation. Using RF cavities at 352 and 704 MHz, it will replace the present 50 MeV proton Linac2, and deliver a 160 MeV, 40 mA H- beam. The higher injection energy will reduce space charge effects by a factor of 2, and charge exchange will drastically reduce the beam losses at injection. Operation will be simplified and the beam brightness required for the LHC ultimate luminosity should be obtained at PS ejection. Moreover, for the needs of non-LHC physics experiments like ISOLDE, the number of protons per pulse from the PSB will increase by a significant factor. This new linac constitutes an essential component of any of the envisaged LHC upgrade scenarios. It is also designed to become the low energy part of a future 3.5 GeV, multi-megawatt superconducting linac (SPL). The present desig...

  3. Sources of Emittance Growth at the CERN PS Booster to PS Transfer

    CERN Document Server

    Bartmann, Wolfgang; Burkart, Florian; Goddard, Brennan; Jentzsch, Jennifer; Ostojić, Ranko

    2016-01-01

    The CERN PS Booster (PSB) has four vertically stacked rings. After extraction from each ring, the bunches are recombined in two stages, comprising septum and kicker systems, such that the accumulated bunch train is injected through a single line into the PS. Bunches from the four rings go through a different number of vertical bends, which leads to differences in the betatron and dispersion functions due to edge focussing. The fast pulsed systems at PSB extraction, recombination and PS injection lead to systematic errors of delivery precision at the injection point. These error sources are quantified in terms of emittance growth and particle loss. Mitigations to reduce the overall emittance growth at the PSB to PS transfer within the LHC injectors upgrade are presented.

  4. Reliability and maintenance analysis of the CERN PS booster

    CERN Document Server

    Staff, P S B

    1977-01-01

    The PS Booster Synchrotron being a complex accelerator with four superposed rings and substantial additional equipment for beam splitting and recombination, doubts were expressed at the time of project authorization as to its likely operational reliability. For 1975 and 1976, the average down time was 3.2% (at least one ring off) or 1.5% (all four rings off). The items analysed are: operational record, design features, maintenance, spare parts policy, operating temperature, effects of thunderstorms, fault diagnostics, role of operations staff and action by experts. (15 refs).

  5. LHC Pilot Bunches from the CERN PS Booster

    CERN Document Server

    Benedikt, Michael

    2003-01-01

    For the first commissioning phase of the LHC, a single proton bunch is required. The production of this so-called "LHC pilot bunch" will follow a different scheme than the one of the nominal LHC proton bunch train. Both the transverse and the longitudinal LHC bunch characteristics should already be established in the PS Booster. The parameter space for the LHC pilot bunch spans a factor 66 in beam brightness. To cover the whole parameter space, a mixture of several ingredients was required: intensity adjustment with low voltage rf-capture; definition of the transverse emittance with shavers; controlled blow-up followed by longitudinal shaving to define the longitudinal emittance. All beam variants were produced on harmonic two, with only one bunch being sent to the downstream accelerator chain. To cover also the lowest intensity side, the Linac beam was reduced by a factor 5 with a "sieve". The pilot bunches corresponding to the "corners" of the parameter space and a few selected inner reference points were s...

  6. Dispersion Matching of a Space Charge dominated Beam at Injection into the CERN PS Booster

    CERN Document Server

    Hanke, Klaus; Scrivens, Richard

    2005-01-01

    In order to match the dispersion at injection into the CERN PS Booster, the optics of the injection line was simulated using two different codes (MAD and TRACE). The simulations were benchmarked versus experimental results. The model of the line was then used to re-match the dispersion. Experimental results are presented for different optics of the line. Measurements with varying beam current show the independence of the measured quantity of space-charge effects.

  7. Space Charge effects and mitigation in the CERN PS Booster, in view of the Upgrade

    CERN Document Server

    Benedetto, Elena; Forte, Vincenzo; Schmidt, Frank

    2016-01-01

    The CERN PS Booster (PSB) is presently running with a space charge tune spread larger than 0.5 at injection. Since the High Luminosity LHC (HL-LHC) will require beams with twice the intensity and brightness of today, the LHC Injector Upgrade (LIU) Project is putting in place an upgrade program for all the injector chain and, in particular, it relies on the important assumption that the PS Booster can successfully produce these beams after the implementation of the 160 MeV H- injection from Linac4. This contribution describes the studies (measure-ments and simulations) that have been carried out to con- firm that the PSB can indeed perform as needed in terms of beam brightness for the future HL-LHC runs. The importance of the mitigation measures already in place, such as the correction of the half-integer line, and the effects of non-linear resonances on the beam are also discussed.

  8. Measurement and Compensation of Betatron Resonances at the CERN PS Booster Synchrotron

    CERN Document Server

    Urschütz, Peter; Benedikt, Michael

    2004-01-01

    The CERN PS Booster synchrotron is the first circular accelerator in the proton injector chain of the future Large Hadron Collider and links the linear accelerator, Linac2, with the Proton Synchrotron. Apart from serving as a pre-injector for the LHC, the PS Booster provides high intensity beams for the ISOLDE physics facility and various other beams for the Proton Synchrotron and its users. The 50 MeV proton beam coming from Linac2 is accumulated in the PS Booster by means of a multi-turn-injection scheme. Throughout injection, rf-capture and early acceleration, the individual particles in the beam “see” large, fluctuating incoherent space-charge tune shifts, consequently sweeping a large area in the tune diagram and covering many resonances. Thus, the beam suffers amplitude blow-up from transverse betatron resonances and an efficient compensation is required to avoid subsequent particle losses. The presently used resonance compensation scheme was established 25 years ago by orthogonal search of coupled ...

  9. CERN PS Booster space charge simulations with a realistic model for alignement and field errors

    CERN Document Server

    Forte, V; McAteer, M

    2014-01-01

    The CERN PS Booster is one of the machines of the LHC injector chain which will be upgraded within the LIU (LHC Injectors upgrade) project. The injection energy of the PSB will be increased to 160MeV in order to mitigate direct space charge effects, considered to be the main performance limitation, thus allowing to double the brightness for the LHC beams. In order to better predict the gain to be expected, space charge simulations are being carried out. Efforts to establish a realistic modeling of field and alignment errors aim at extending the basic model of the machine towards a more realistic one. Simulations of beam dynamics with strong direct space charge and realistic errors are presented and analysed in this paper.

  10. Design of the New Wideband RF System for the CERN PS Booster

    CERN Document Server

    Paoluzzi, Mauro; Angoletta, Maria Elena; Arnaudon, Luca; Energico, Salvatore; Findlay, Alan; Haase, Matthias; Jaussi, Michael; Jones, Anthony; Landré, David; Molendijk, John; Quartullo, Danilo; Shaposhnikova, Elena

    2016-01-01

    For the renovation and upgrade of the CERN PS Booster (PSB) RF systems a development project was launched in 2012. The design, based on a new approach, aimed at replacing the existing tuned, narrowband RF systems with wideband, modular, solid-state driven units. A wide range of issues had to be addressed spanning from RF power production, radiation hardness of solid-state devices, active cancellation of beam-induced voltages, dedicated low-level electronics allowing multi-harmonic operation and beam stability. Following a three-year prototyping and testing campaign and two international reviews, the project endorsement came at the end of year 2015. It foresees the complete removal of present h1, h2 and h10 systems and the deployment of a new one covering all the frequency ranges from 1 MHz to 18 MHz. The four PSB rings will be equipped with 144 identical acceleration cells providing 24 kV total RF voltage per ring. This paper describes the design concepts, the retained solutions, the expected performances and...

  11. The PS booster

    CERN Multimedia

    1972-01-01

    The PS booster which accelerates protons from the linac at an energy of 50 MeV to an energy of 800 MeV before injecting them into the main magnet ring of the synchrotron. The booster consists of four superposed rings. In the photograph can be seen the input beam line from the linac and the output beam lines, where beams from the four booster levels have been combined into two beams before final recombination.

  12. 3D Emittances Tailoring Techniques and Optimization with Space Charge for the Future CERN PS Booster Operations with Linac4

    CERN Document Server

    Forte, Vincenzo; Benedetto, Elena; Bracco, Chiara; Cieslak-Kowalska, Magdalena; Di Giovanni, Gian Piero

    2016-01-01

    In the frame of the LIU (LHC Injectors Upgrade) project, the CERN PS Booster is going to be renovated to host a new H⁻ charge-exchange injection from the Linac4. One important feature of the new injection scheme is the possibility to tailor a wide range of 3D emittances for CERN's different users in an intensity span in the order of 5·10⁹ to 1.6·10¹³ protons per PSB ring. This paper gives an overview of 3D multi-turn injection techniques, focusing on the future LHC beams, which aim at reaching high brightness, and on highest intensity beams (ISOLDE), where losses are the main concern. Complete RF capture simulations and transverse injection maps, including space charge effects, are presented and also intended to be used during the commissioning with Linac4.

  13. The PS Booster hits 40

    CERN Multimedia

    Joannah Caborn Wengler

    2012-01-01

    Many accelerators’ "round" birthdays are being celebrated at CERN these days – the PS turned 50 in 2009, the SPS was 35 in 2011, and this year it's the turn of the PS Booster to mark its 40th anniversary. Originally designed to accelerate 1013 protons to 800 MeV, it has far exceeded its initial design performance over the years.   The PS Booster in the 1970s. Imagine the scene: a group of accelerator physicists staring expectantly at a monitor, when suddenly a shout of joy goes up as a signal flickers across the screen. Does that sound familiar? Well, turn the clock back 40 years (longer hair, wider trouser legs) and you have the situation at the PS Booster on 26 May 1972. On that day, beam was injected into the Booster for the first time. “It was a real buzz,” says Heribert Koziol, then Chairman of the Running-in Committee. “We were very happy – and also a little relieved – when the beam finally...

  14. Studies on a wideband, solid-state driven RF system for the CERN PS booster

    CERN Document Server

    Paoluzzi, M M; Arnaudon, L; Chritin, N S; Mikulec, B; Hanke, K; Tardy, T

    2012-01-01

    In the framework of the LHC Injectors Upgrade project (LIU) the PS Booster (PSB) will undergo in depth consolidation and upgrade programs [1]. The aim is increasing the extraction energy to 2 GeV, exploiting the potential of Linac4 and allowing reliable operations during the next 25 years. For the RF system, substantial improvements could come from the replacement of the existing narrowband, tuned systems covering the h=1 and h=2 frequency ranges (0.6 ÷ 1.8 MHz and 1.2 ÷ 3.6 MHz respectively) with wideband (0.5 ÷ 4 MHz) Finemet® loaded cavities. The new system would be modular, allow multi-harmonic operation, use solid-state power stages and include fast RF feedback to compensate beam loading effects to some extent. A proof of principle system providing ≈3.0 kV accelerating voltage has been designed, constructed and installed in one of the PSB rings. This paper provides details on the design and measurements as well as information on the project status.

  15. Detailed magnetic model simulations of the H- injection chicane magnets for the CERN PS Booster Upgrade, including eddy currents and influence on beam dynamics

    CERN Document Server

    Benedetto, E; Borburgh, J; Carli, C; Martini, M; Forte, V

    2014-01-01

    The CERN PS Booster will be upgraded with an H- injection system. The chicanemagnets for the injection bump ramp-down in 5 ms and generate eddy currents in the inconel vacuum chamber which perturb the homogeneity of the magnetic field. The multipolar field components are extracted from 3D OPERA simulations and are included in the lattice model. The -beating correction is computed all along the ramp and complete tracking simulations including space-charge are performed to evaluate the impact of these perturbations and correction on beam dynamics.

  16. Evolution of High Intensity Beams in the CERN PS Booster after H⁻ Injection and Phase Space Painting

    CERN Document Server

    Cieslak-Kowalska, Magdalena; Benedetto, Elena; Bracco, Chiara

    2016-01-01

    With the LHC Injector Upgrade (LIU) project, the injection energy of PS Booster (PSB) ' first circular accelerator in the LHC injector chain ' will be raised from 50 MeV to 160 MeV and the present multiturn injection will be upgraded to H⁻ injection with transverse and longitudinal painting. In the scope of this project, it is planned to double the beam intensities, profiting from the fact that the βγ2 factor will be two times larger (0.35 at 50 MeV and 0.71 at 160 MeV), so the resulting tune spread driven by a direct space charge should remain similar. This paper describes the feasibility to double the intensity of high intensity and large emittance beams, looking into the evolution under space charge and taking into account losses constrains in the ring and in the extraction lines.

  17. CERN News: Slow ejection efficiency at the PS; Vacuum tests on the ISR; Fire in the neutrino beam-line; Prototype r.f . cavity for the Booster; Crane-bridge in ISR experimental hall; Modifications to the r.f . system at the PS

    CERN Multimedia

    1969-01-01

    CERN News: Slow ejection efficiency at the PS; Vacuum tests on the ISR; Fire in the neutrino beam-line; Prototype r.f . cavity for the Booster; Crane-bridge in ISR experimental hall; Modifications to the r.f . system at the PS

  18. Design study of the large hadron electron collider and a rapid cycling synchrotron as alternative to the PS booster upgrade at CERN

    Energy Technology Data Exchange (ETDEWEB)

    Fitterer, Miriam

    2013-02-22

    With the Large Hadron Collider (LHC) the exploration of particle physics at center of mass energies at the TeV scale has begun. To extend the discovery potential of the LHC, a major upgrade is foreseen around 2020 of the LHC itself and the LHC injectors - the chain of accelerators preparing the beam for the LHC. One of the injectors - the second one in the chain - is the Proton Synchrotron (PS) Booster. Its performance is currently limited by the space-charge effect, which is the effect of the electromagnetic field of the particle beam on itself. This effect becomes weaker with higher energy, and therefore an energy upgrade of the PS Booster to 2 GeV maximum beam energy is foreseen. As the PS Booster is with its 40 years already an old machine, the construction of a new accelerator, a Rapid Cycling Synchrotron (RCS), to replace the PS Booster has been proposed. In this thesis different options for the beam guidance in the RCS - referred to as lattice and optics - are studied, followed by a more general comparison of different lattices and optics and their performance under consideration of the space-charge effect. To further complement the LHC physics program, also the possibility of deep inelastic lepton-nucleon scattering at the LHC has been suggested, referred to as Large Hadron Electron Collider (LHeC). In this case the proton beam of the LHC collides with the electron beam, which is accelerated in a separate newly built machine. Two options are considered as electron accelerator: a new energy recovery linac - the Linac-Ring option - and the installation of an electron ring in the existing LHC tunnel - the Ring-Ring option. One of the main challenges of the Ring-Ring option is the integration of the electron ring in the current LHC tunnel. A layout, lattice and optics of the electron accelerator is developed in this thesis, which meets the requirements with regard to integration and reaches the beam parameters demanded by the particle physics experiments.

  19. Measuring target for the PS Booster

    CERN Multimedia

    1971-01-01

    The measuring target for the PS Booster (originally 800 MeV, now 1.4 GeV). It measures the size of the beam by destroying all particles with amplitudes greater than the size of the fork, the position and width of which are adjustable. The plunging time is only 20 ms and the acceleration at the tip of the fork reaches 90 g. The servo-controlled linear motor is shown detached from the mechanism. See also 7602008.

  20. Position pickup of the PS Booster

    CERN Multimedia

    1975-01-01

    The beam position around the 4 rings of the PS Booster (originally 800 MeV, now 1.4 GeV), is measured with electrostatic pickups (PU). They consist of a ceramic cylinder forming part of the vacuum chamber, and, in order to save space, they are located inside the multipole lenses. The inside of the ceramic is coated with a metallic layer, into which the form of the electrodes was cut by computer-controlled micro-sandblasting. Each PU has a pair of horizontal and a pair of vertical electrodes, as well as a separate intensity-sensing circular electrode.

  1. The PS Booster Fast Wire Scanner

    CERN Document Server

    Burger, S; Priestnall, K; Raich, U

    2003-01-01

    The very tight emittance budget for LHC type beams makes precise emittance measurements in the injector complex a necessity. The PS machine uses 2 fast wire scanners per transverse plane for emittance measurement of the circulating beams. In order to ease comparison the same type of wire scanners have been newly installed in the upstream machine, the PS Booster, where each of the 4 rings is equipped with 2 wire scanners measuring the horizontal and vertical profiles. Those wire scanners use new and more modern control and readout electronics featuring dedicated intelligent motor movement controllers, which relieves the very stringent real time constraints due to the very high speed of 20m/s. In order to be able to measure primary beams at the very low injection energy of the Booster (50MeV) secondary emission currents from the wire can be measured as well as secondary particle flows at higher primary particle energies during and after acceleration. The solution adopted for the control of the devices is descri...

  2. MD on Head-Tail Instability in the PS Booster

    CERN Document Server

    Kornilov, V; Mikulec, B; Aumon, S; Rumolo, G

    2013-01-01

    Machine study experiments on the coherent instabilities appearing along the magnetic ramp have been performed at the CERN PS Booster synchrotron in the week of June 11-15, 2012. The space- and time structure of the head-tail instabilities was recorded by the triggered pick-up signals due to reproducibility of the occurrence time in the shot-by-shot sense. The intensity thresholds, the absolute growth rates and the mode structure have been compared for the bunches in the single-rf and in three types of the double-rf operation. The growth rates are compared to the instantaneous synchrotron frequencies, in the cases of the large corresponding ratio the head-tail mode structure is deformed by the driving impedance. Bunch parameters measurements indicate that the PSB bunches are in the regime of very strong transverse space-charge all along the magnetic ramp.

  3. LS1 Report: PS Booster prepares for beam

    CERN Multimedia

    Katarina Anthony

    2014-01-01

    With Linac2 already up and running, the countdown to beam in the LHC has begun! The next in line is the PS Booster, which will close up shop to engineers early next week. The injector will be handed over to the Operations Group who are tasked with getting it ready for active duty.   Taken as we approach the end of LS1 activities, this image shows where protons will soon be injected from Linac2 into the four PS Booster rings. Over the coming two months, the Operations Group will be putting the Booster's new elements through their paces. "Because of the wide range of upgrades and repairs carried out in the Booster, we have a very full schedule of tests planned for the machine," says Bettina Mikulec, PS Booster Engineer in Charge. "We will begin with cold checks; these are a wide range of tests carried out without beam, including system tests with power on/off and with varying settings, as well as verification of the controls system and timings." Amon...

  4. The PS Booster's ejection kicker: full house.

    CERN Multimedia

    1971-01-01

    The modules of the Booster's four-storied full-aperture kicker pretty much fill their vacuum tank (front cover removed). In the original 800 MeV version, the delay-type modules were pulsed at 30 kV from a Pulse-Forming-Network (PFN), yielding a field risetime as short as 60 ns. The fieldstrength was 0.1 T at a current of 1200 A. The modules are made from steel plates and ferrite slabs. The ferrite's high initial outgassing rate presented a serious vacuum problem for a long time.

  5. Multipole stack for the 4 rings of the PS Booster

    CERN Multimedia

    1976-01-01

    The PS Booster (originally 800 MeV, now 1.4 GeV) saw first beam in 1972, routine operation began in 1973. The strive for ever higher intensities required the addition of multipoles. Manufacture of 8 stacks of multipoles was launched in 1974, for installation in 1976. For details, see 7511120X.

  6. Injection and transfer lines of the PS Booster

    CERN Multimedia

    Photographic Service

    1972-01-01

    In the foreground is the vacuum chamber for the 50 MeV proton beam coming from the Linac. The tank held by white frames houses the "Vertical Distributor", which deflects the Linac beam to the levels of the Booster's 4 superposed rings. After acceleration in the Booster, originally to 800 MeV, today to 1.4 GeV, the beams from the 4 rings are combined in the vertical plane and transfered to the 26 GeV PS. The "Recombination Line", intersecting the injection line, crosses the picture from left to right.

  7. N$_2$ and Xe Gas Scintillation Cross-Section, Spectrum, and Lifetime Measurements from 50 MeV to 26 GeV at the CERN PS and Booster

    CERN Document Server

    Bosser, Jacques; MacCaferri, R; Plüm, M A

    2002-01-01

    Beam parameters in CERN's Proton Synchrotron (PS) accelerator must be controlled (and measured) with tighter precision than ever before to meet the stringent requirements of the Large Hadron Collider (LHC) programme. A non-destructive beam profile measurement system would be a valuable diagnostic tool. To this end, we measured N2 and Xe gas scintillation absolute cross-sections and lifetimes for proton beam energies from 1.4 to 25 GeV, which should prove valuable in the design and construction of a gas scintillation profile measurement system. We also measured relative cross-sections for proton beam energies between 0.05 and 1.4 GeV.

  8. The PS Booster as Pre-Injector for LHC

    CERN Document Server

    Schindl, Karlheinz

    1997-01-01

    The LHC will be supplied with protons from the injector chain Linac2-PS Booster-PS-SPS. The beam must have small transverse emittances to fit into the LHC dynamic aperture, but sufficient intensity to assure high luminosity operation. Such a beam with a brightness twice the one of present beams is feasible with a scheme involving acceleration of one bunch (instead of five) in each of the four PSB rings to a kinetic energy raised from 1 to 1.4 GeV, and two-batch filling of the PS. Beam dynamics aspects such as how to tackle small emittances under high space charge, optimizing the (time-varying) working point and dealing with stop-bands, the advent of new RF harmonics 1 and 2, how to shape the magnet cycle, are discussed, and results of machine experiments reported. Finally some open issues as well as ideas for future improvements are discussed.

  9. Beam lines from Linac 1 to PS and Booster

    CERN Multimedia

    1978-01-01

    View against the direction of the proton beams. The 50 MeV Linac 1 is behind the concrete wall. Its beam emerges from the hole near the centre of the picture. A switching magnet directs the beam either to the PS (to the right in the sense of the beam; original injection line), or lets it go straight on to the Booster (originally 800 MeV, now 1.4 GeV). The huge drum in the line to the Booster is a "debuncher", driven by the 200 MHz RF of the linac. It reduces the beam's momentum spread. This was the last year of Linac 1 as provider of protons to the Booster. Linac 2, nearly completed at the time of this picture, took up trial delivery at the end of 1978, and routine delivery in 1979. The beam line from Linac 2, barely visible here, can be clearly seen on 7802260. Linac 1 had a second life as an ion accelerator.

  10. Preparations for Upgrading the RF Systems of the PS Booster

    CERN Document Server

    Albright, Simon; Shaposhnikova, Elena

    2016-01-01

    The accelerators of the LHC injector chain need to be upgraded to provide the HL-LHC beams. The PS Booster, the first synchrotron in the LHC injection chain, uses three different RF systems (first, second and up to tenth harmonic) in each of its four rings. As part of the LHC Injector Upgrade the current ferrite RF systems will be replaced with broadband Finemet cavities, increasing the flexibility of the RF system. A Finemet test cavity has been installed in Ring 4 to investigate its effect on machine performance, especially beam stability, during extensive experimental studies. Due to large space charge impedance Landau damping is lost through most of the cycle in single harmonic operation, but is recovered when using the second harmonic and controlled longitudinal emittance blow-up. This paper compares beam parameters during acceleration with and without the Finemet test cavity. Comparisons were made using beam measurements and simulations with the BLonD code based on a full PS Booster impedance model. Thi...

  11. The HARP detector at the CERN PS

    CERN Document Server

    Catanesi, M G; Radicioni, E; Simone, S; Edgecock, R; Ellis, M; Robbins, S; Soler, F J P; Gößling, C; Mass, M; Bunyatov, S; Chukanov, A; Klimov, O; Krasin, I; Krasnoperov, A; Kustov, D; Popov, B; Serdiouk, V; Tereshchenko, V; Carassiti, V; Di Capua, E; Evangelisti, F; Vidal-Sitjes, G; Artamonov, A; Arce, P; Brocard, R; Decreuse, G; Friend, B; Giani, S; Gilardoni, S; Gorbunov, p; Grant, A; Grossheim, A; Gruber, P; Ivanchenko, V; Legrand, J C; Kayis-Topaksu,A; Panman, P; Papadopoulos, I; Pasternak, J; Chernyaev, E; Tsukerman, I; van der Vlugt, R; Veenhof, R; Wiebusch, C; Zucchelli, P; Blondel, A; Borghi, S; Campanelli, M; Cervera-Villanueva, A; Morone, M C; Prior, G; Schroeter, R; Kato, I; Gastaldi, Ugo; Mills, G B; Graulich, J S; Grégoire, G; Bonesini, M; Chignoli, F; Ferri, F; Paleari, F; Kirsanov, M; Postoev, V; Bagulya A; Grichine, V; Polukhina, N; Palladino, V; Coney, L; Schmitz, D; Barr, G; De Santo, A; Pattison, C; Zuber, K; Barichello, G; Bobisut, F; Gibin, D; Guglielmi, A; Laveder, M; Menegolli, A; Mezzetto M; Pepato, Adriano; Dumarchez, J; Troquereau, S; Vannucci, F; Dore, U; Iaciofano, A; Lobello, M; Marinilli, F; Orestano, D; Panayotov, D; Pasquali, M; Pastore, F; Tonazzo, A; Tortora, L; Booth, C; Buttar, C; Hodgson, P; Howlett, L; Nicholson, R; Bogomilovw, M; Burin, K; Chizhov, M; Kolev, D; Petev, P; Rusinov, I; Tsenov, R; Piperov, S; Temnikov, P; Apollonio, M; Chimenti, P; Giannini, G; Santin, G; Burguet-Castell, J; Gómez-Cadenas, J J; Novella, P; Sorel, M; Tornero, A

    2007-01-01

    HARP is a high-statistics, large solid angle experiment to measure hadron production using proton and pion beams with momenta between 1.5 and 15 GeV/c impinging on many different solid and liquid targets from low to high Z. The experiment, located in the T9 beam of the CERN PS, took data in 2001 and 2002. For the measurement of momenta of produced particles and for the identification of particle types, the experiment includes a large-angle spectrometer, based on a Time Projection Chamber and a system of Resistive Plate Chambers, and a forward spectrometer equipped with a set of large drift chambers, a threshold Cherenkov detector, a time-of-flight wall and an electromagnetic calorimeter. The large angle system uses a solenoidal magnet, while the forward spectrometer is based on a dipole magnet. Redundancy in particle identification has been sought, to enable the cross-calibration of efficiencies and to obtain a few percent overall accuracy in the cross-section measurements. Detector construction, operation an...

  12. The HARP detector at the CERN PS

    Science.gov (United States)

    Catanesi, M. G.; Muciaccia, M. T.; Radicioni, E.; Simone, S.; Edgecock, R.; Ellis, M.; Robbins, S.; Soler, F. J. P.; Gößling, C.; Mass, M.; Bunyatov, S.; Chukanov, A.; Klimov, O.; Krasin, I.; Krasnoperov, A.; Kustov, D.; Popov, B.; Serdiouk, V.; Tereshchenko, V.; Carassiti, V.; Di Capua, E.; Evangelisti, F.; Vidal-Sitjes, G.; Artamonov, A.; Arce, P.; Brocard, R.; Decreuse, G.; Friend, B.; Giani, S.; Gilardoni, S.; Gorbunov, P.; Grant, A.; Grossheim, A.; Gruber, P.; Ivanchenko, V.; Legrand, J.-C.; Kayis-Topaksu, A.; Panman, J.; Papadopoulos, I.; Pasternak, J.; Tcherniaev, E.; Tsukerman, I.; van der Vlugt, R.; Veenhof, R.; Wiebusch, C.; Zucchelli, P.; Blondel, A.; Borghi, S.; Campanelli, M.; Cervera-Villanueva, A.; Morone, M. C.; Prior, G.; Schroeter, R.; Kato, I.; Gastaldi, U.; Mills, G. B.; Graulich, J. S.; Grégoire, G.; Bonesini, M.; Chignoli, F.; Ferri, F.; Paleari, F.; Kirsanov, M.; Postoev, V.; Bagulya, A.; Grichine, V.; Polukhina, N.; Palladino, V.; Coney, L.; Schmitz, D.; Barr, G.; De Santo, A.; Pattison, C.; Zuber, K.; Barichello, G.; Bobisut, F.; Gibin, D.; Guglielmi, A.; Laveder, M.; Menegolli, A.; Mezzetto, M.; Pepato, A.; Dumarchez, J.; Troquereau, S.; Vannucci, F.; Dore, U.; Iaciofano, A.; Lobello, M.; Marinilli, F.; Orestano, D.; Panayotov, D.; Pasquali, M.; Pastore, F.; Tonazzo, A.; Tortora, L.; Booth, C.; Buttar, C.; Hodgson, P.; Howlett, L.; Nicholson, R.; Bogomilov, M.; Burin, K.; Chizhov, M.; Kolev, D.; Petev, P.; Rusinov, I.; Tsenov, R.; Piperov, S.; Temnikov, P.; Apollonio, M.; Chimenti, P.; Giannini, G.; Santin, G.; Burguet-Castell, J.; Gómez-Cadenas, J. J.; Novella, P.; Sorel, M.; Tornero, A.

    2007-02-01

    HARP is a high-statistics, large solid angle experiment to measure hadron production using proton and pion beams with momenta between 1.5 and 15 GeV/ c impinging on many different solid and liquid targets from low to high Z. The experiment, located in the T9 beam of the CERN PS, took data in 2001 and 2002. For the measurement of momenta of produced particles and for the identification of particle types, the experiment includes a large-angle spectrometer, based on a Time Projection Chamber and a system of Resistive Plate Chambers, and a forward spectrometer equipped with a set of large drift chambers, a threshold Cherenkov detector, a time-of-flight wall and an electromagnetic calorimeter. The large angle system uses a solenoidal magnet, while the forward spectrometer is based on a dipole magnet. Redundancy in particle identification has been sought, to enable the cross-calibration of efficiencies and to obtain a few percent overall accuracy in the cross-section measurements. Detector construction, operation and initial physics performances are reported. In addition, the full chain for data recording and analysis, from trigger to the software framework, is described.

  13. Multipole Stack for the 800 MeV PS Booster

    CERN Multimedia

    1975-01-01

    The 800 MeV PS Booster had seen first beam in its 4 superposed rings in 1972, routine operation began in 1973. In the strive for ever higher beam intensities, the need for additional multipole lenses became evident. After detailed studies, the manufacture of 8 stacks of multipoles was launched in 1974. Each stack consists of 4 superposed multipoles and each multipole has 4 concentric shells. From the innermost to the outermost shell, Type A contains octupole, skew-octupole, sextupole, skew-sextupole. Type B contains skew-octupole, skew-sextupole, vertical dipole, horizontal dipole. Completion of installation in 1976 opened the way to higher beam intensities. M. Battiaz is seen here with a multipole stack and its many electrical connections.

  14. A New CERN PS Transverse Damper

    CERN Document Server

    Blas, A; Benedetto, E; Caspers, Friedhelm; Glenat, D C; Louwerse, R; Martini, M; Métral, E; Rossi, V; Sladen, J

    2010-01-01

    Since 1999 the PS has been operated without active transverse damping thanks to an increase of the coupling between the transverse planes and the reduction of injection steering errors. Although the LHC requirements are met by these means, a new transverse feedback system has been commissioned to reinforce the robustness of operation and avoid the blow-up generated by residual injection steering errors. This system could also allow the reduction of the chromaticity and reduce the slow incoherent losses during the long PS injection plateau. It could also stabilize the high energy instabilities that appear occasionally with the LHC nominal beam and may be a limiting factor for ultimate LHC beam. Highlights include a signal processing with an automatic delay adapting itself to the varying revolution frequency, a programmable betatron phase adjustment along the cycle, pick-ups that have been re-furbished with electronics covering the very low frequency of the first betatron line and a compact wideband high-power ...

  15. The CERN PS/SL Controls Java Application Programming Interface

    International Nuclear Information System (INIS)

    The PS/SL Convergence Project was launched in March 1998. Its objective is to deliver a common control as infrastructure for the CERN accelerators by year 2001. In the framework of this convergence activity, a project was launched to develop a Java Application Programming Interface (API) between programs written in the Java language and the PS and SL accelerator equipment. This Java API was specified and developed in collaboration with TJNAF. It is based on the Java CDEV [1] package that has been extended in order to end up with a CERN/TJNAF common product. It implements a detailed model composed of devices organized in named classes that provide a property-based interface. It supports data subscription and introspection facilities. The device model is presented and the capabilities of the API are described with syntax examples. The software architecture is also described

  16. Electron cloud in the CERN accelerators (PS, SPS, LHC)

    OpenAIRE

    Iadarola, G.; Rumolo, G.

    2013-01-01

    Several indicators have pointed to the presence of an Electron Cloud (EC) in some of the CERN accelerators, when operating with closely spaced bunched beams. In particular, spurious signals on the pick ups used for beam detection, pressure rise and beam instabilities were observed at the Proton Synchrotron (PS) during the last stage of preparation of the beams for the Large Hadron Collider (LHC), as well as at the Super Proton Synchrotron (SPS). Since the LHC has started operation in 2009, ty...

  17. The 1.4 GeV PS Booster in its tunnel.

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    The PS Improvement Programme, launched as early as 1964, had a "Booster" as the key element in the quest for higher beam intensity and density. These were limited in the PS at injection of the 50 MeV proton beam from the linac by the incoherent (Laslett-) Q-shift. Boosting the linac beam to 800 MeV would raise the PS intensity limit by an order of magnitude, from 1E12 protons per pulse to 1E13. The main motivation was the supply of intense beams to the ISR. Soon, the Booster proved to be crucial for the neutral current experiment. A unique feature of the Booster are its 4 superposed rings. Its lattice is also unusual: between its 32 bending magnets, every second straight section contains a quadrupole triplet (F,D,F), while the alternate ones are drift spaces (mostly filled with essential components like septa, kickers, RF-cavities, etc.). In each picture we see one of the 16 periods. Following the direction of the beam from right to left: a bending magnet (green); an empty straight section; a bending magnet; ...

  18. Longitudinal Coupled-Bunch Instabilities in the CERN PS

    CERN Document Server

    Damerau, H; Mehler, M; Rossi, C; Shaposhnikova, E; Tückmantel, Joachim; Vallet, J L

    2007-01-01

    Longitudinal coupled bunch instabilities in the CERN PS represent a major limitation to the high brightness beam delivered for the LHC. To identify possible impedance sources for these instabilities, machine development studies have been carried out. The growth rates of coupled bunch modes have been measured, and modes have been identified using mountain range data. Growth rate estimations from coupled bunch mode theory are compared to these results. It is shown that the longitudinal impedance of the broad resonance curve of the main 10 MHz RF system can be identified as the most probable source. Several modes are driven simultaneously due to the large width of the resonance, which is considered for the analysis.

  19. Prediction of the Field Distribution in CERN-PS Magnets

    CERN Document Server

    Schoerling, D

    2014-01-01

    The CERN Proton Synchrotron (PS) has a circumference of 628m and operates at an energy of up to 26 GeV. It uses one hundred combined function magnets, with pole shapes designed to create a dipolar and a quadrupolar field component. Each magnet is equipped with a main current circuit and five auxiliary current-circuits, which allows controlling the linear and non-linear magnetic fields. These magnets were installed in the 1950s, and part of the compensating circuits have been added or modified since then, resulting in the fact that detailed measurements of the field distribution in each individual magnet as a function of the six currents are not available. This study is performed to estimate, through deterministic and stochastic calculations, the expected mean value and standard deviation of the field harmonics of the installed magnets as input for beam dynamics simulations. The relevant results can be used to design correction schemes to minimise beam losses in the PS and to enable the acceleration of higher ...

  20. Upgrade Strategies for the Proton Synchrotron Booster Dump at CERN

    CERN Document Server

    Sarrio Martinez, A; Maglioni, C

    2012-01-01

    CERN’s LHC Injection chain Upgrade (LIU) involves a revision of the Proton Synchrotron Booster dump, which was designed in the 1960’s to cope with beam energies reaching 800 MeV and intensities of 1e+13 particles per pulse. Thermo-mechanical studies highlighted the need for an upgrade of the dump, so that it is capable of withstanding energies in the order of 2 GeV and intensities up to 1e+14 particles per pulse. This paper proposes a new design of the dump in the light of various constraints and choices such as the geometry, materials and the integration of the required cooling system. Further topics discussed include the strategy for dismantling the old device, which has been continuously irradiated for almost 40 years and presents a difficult access. Therefore, a detailed ALARA procedure is being prepared in order to carry out the upgrade works in the area.

  1. Injection Bump Synchronization Study for the CERN PS

    CERN Document Server

    Serluca, Maurizio; Gilardoni, Simone; CERN. Geneva. ATS Department

    2016-01-01

    In the framework of the LHC Injector Upgrade (LIU) project the CERN PS injection kinetic energy will be upgraded from 1.4 to 2 GeV. The present injection bump is made by four bumpers in Straight Section (SS) 40, 42, 43, 44 and it will be converted in a five bumpers system to allow additional flexibility in the bump shape with a reduction of the proton losses during the bump closure. The injection section SS42 has being redesigned to accommodate a new eddy current septum which will host a new bumper magnet in the same vacuum vessel due to reduced longitudinal space availability. The synchronization and amplitude variation of the power converter of the in-vacuum bumper 42 with respect to the remaining outside vacuum bumpers 40, 41, 43, 44 can lead to orbit distortion and consequent losses during injection. In this note we present the experimental results from Machine Development (MD) studies along with simulations for the present system at 1.4 GeV to quantify the acceptable orbit distortion and the performance ...

  2. Electron cloud in the CERN accelerators (PS, SPS, LHC)

    CERN Document Server

    Iadarola, G

    2013-01-01

    Several indicators have pointed to the presence of an Electron Cloud (EC) in some of the CERN accelerators, when operating with closely spaced bunched beams. In particular, spurious signals on the pick ups used for beam detection, pressure rise and beam instabilities were observed at the Proton Synchrotron (PS) during the last stage of preparation of the beams for the Large Hadron Collider (LHC), as well as at the Super Proton Synchrotron (SPS). Since the LHC has started operation in 2009, typical electron cloud phenomena have appeared also in this machine, when running with trains of closely packed bunches (i.e. with spacings below 150ns). Beside the above mentioned indicators, other typical signatures were seen in this machine (due to its operation mode and/or more refined detection possibilities), like heat load in the cold dipoles, bunch dependent emittance growth and degraded lifetime in store and bunch-by-bunch stable phase shift to compensate for the energy loss due to the electron cloud. An overview o...

  3. Design of Air-Cooled Beam Dump for Extraction Line of PS Booster

    CERN Document Server

    Perillo-Marcone, A; Venturi, V; Antonakakis, T; Vlachoudis, V; Nowak, E; Mason, G; Battistin, M; Czapski, M; Sgobba, S

    2013-01-01

    A new beam dump has been designed, which withstands the future proton beam extracted from the Proton Syncrotron Booster (PSB) at CERN, consisting of up to 1E14 protons per pulse at 2 GeV after its upgrade in 2018/2019. In order to be able to efficiently release the deposited heat, the new dump will be made out of a single cylindrical block of a copper alloy and cooled by forced ventilation. In order to determine the energy density distribution deposited by the beam in the dump, Monte Carlo simulations were performed using FLUKA, and thermomechanical analyses carried out by importing the energy density into Ansys. In addition, CFD simulations of the airflow were carried out in order to accurately estimate the heat transfer convection coefficient on the surface of the dump. This paper describes the design process and highlights the constraints of integrating a new dump for increased beam power into the existing facility.

  4. High Energy Booster Options for a Future Circular Collider at CERN

    CERN Document Server

    Stoel, Linda; Bartmann, Wolfgang; Burkart, Florian; Goddard, Brennan; Herr, Werner; Kramer, Thomas; Milanese, Attilio; Rumolo, Giovanni; Shaposhnikova, Elena

    2016-01-01

    In case a Future Circular Collider for hadrons (FCC-hh) is constructed at CERN, the tunnels for SPS, LHC and the 100 km collider will be available to house a High Energy Booster (HEB). The different machine options cover a large technology range from an iron-dominated machine in the 100 km tunnel to a superconducting machine in the SPS tunnel. Using a modified LHC as reference, these options are compared with respect to their energy reach, magnet technology and filling time of the collider. Potential issues with beam transfer, reliability and beam stability are presented.

  5. Beam tests of MedAustron RF-jump at CERN’s PS Booster

    CERN Document Server

    Angoletta, M E; Hancock, S; Dorda, U

    2013-01-01

    MedAustron is a centre for ion beam cancer therapy (protons and carbon ions) and non-clinical research currently under construction in Wiener-Neustadt (Austria). MedAustron’s synchrotron Low-Level RF (LLRF) system is being developed in collaboration with CERN’s RF group. As part of the preparation of the beam for the betatron-core driven, horizontal third order slow resonant extraction, an RF-jump to the unstable phase must be executed which creates a uniform momentum spread of fixed width. A conceptual feasibility study of this RF-gymnastic was carried out during the 2012 run at CERN’s PS Booster (PSB). This consisted of several machine development sessions where the beam in PSB ring 4 was accelerated via a prototype Digital LLRF (DLLRF) system and a jump to the unstable phase and back was carried out in a controlled way. The aim of the study was to define the beam control features required to carry out this RF gymnastic and if possible to validate their implementation. This note describes the MedAu...

  6. Search for Neutrino Oscillations at CERN PS Using BEBC

    CERN Multimedia

    2002-01-01

    This experiment searches for neutrino oscillations detecting in BEBC neutrinos of different flavours originated by an initial @n&s'@m. beam. A low energy proton beam extracted from the PS is used to provide a @n&s'@m. beam focused towards BEBC. With such a beam two requirements for an experiment of high sensitivity are met:\\\\ \\\\ \\item a) the ratio of the distance travelled by neutrinos over their energy is large; \\item b) the beam is initially a high purity @n&s'@m. beam, the background of @n^e's being a few in a thousand. \\end{enumerate} @n&s'@m.~@A~@v^e oscillations would manifest themselves giving @n^e induced events in BEBC. The chamber filled with a heavy Ne-H^2 mixture is an ideal instrument to detect and measure electrons with momenta from few tens of MeV/c to several GeV/c, as well as the CC @n&s'@m. events for normalization. @n&s'@m.~@A~@n&s'@t. oscillation can be searched for by comparing the measured ratio NC/CC with that expected without oscillations.

  7. Simulation of Instability at Transition Energy with a New Impedance Model for CERN PS

    CERN Document Server

    Wang, Na; Biancacci, Nicolo; Migliorati, Mauro; Persichelli, Serena; Sterbini, Guido

    2016-01-01

    Instabilities driven by the transverse impedance are proven to be one of the limitations for the high intensity reach of the CERN PS. Since several years, fast single bunch vertical instability at transition energy has been observed with the high intensity bunch serving the neu-tron Time-of-Flight facility (n-ToF). In order to better understand the instability mechanism, a dedicated meas-urement campaign took place. The results were compared with macro-particle simulations with PyHEADTAIL based on the new impedance model developed for the PS. Instability threshold and growth rate for different longitu-dinal emittances and beam intensities were studied.

  8. Multi-turn injection of 50 MeV protons into the CERN Proton Synchrotron booster

    CERN Document Server

    Raginel, V; Carli, C; Mikulec, B

    2013-01-01

    Since 1978, Linac2 produces beams of 50 MeV protons with a current around 160 mA, which are injected into the CERN Proton Synchrotron Booster (PSB) with conventional multi-turn injection using a horizontal septum. It is planned to replace Linac2 during a future long stop with a new H- linac, Linac4, injecting at higher energy (160 MeV) and making use of the modern chargeexchange injection principle. Due to the age of Linac2 and to a delicate vacuum situation the risk of a serious Linac2 breakdown has to be considered. Therefore it is necessary to study if the PSB could produce beams useful for the LHC and other experiments injecting a Linac4 proton beam at 50 MeV with much lower average current compared to Linac2 and without the need for a long installation of the 160 MeV H- injection hardware. Benchmarking of the PSB injection model with the existing injection system with Linac2 using the ORBIT code has been done for a LHC-type beam and then the injection model was used to estimate the brightness for LHC-typ...

  9. Multi-turn injection of 50 MeV protons into the CERN Proton Synchrotron Booster

    CERN Document Server

    Raginel, V; Carli, C; Mikulec, B

    2013-01-01

    Since 1978, Linac2 produces beams of 50 MeV protons with a current around 160 mA, which are injected into the CERN Proton Synchrotron Booster (PSB) with conventional multi-turn injection using a horizontal septum. It is planned to replace Linac2 during a future long stop with a new H- linac, Linac4, injecting at higher energy (160 MeV) and making use of the modern chargeexchange injection principle. Due to the age of Linac2 and to a delicate vacuum situation the risk of a serious Linac2 breakdown has to be considered. Therefore it is necessary to study if the PSB could produce beams useful for the LHC and other experiments injecting a Linac4 proton beam at 50 MeV with much lower average current compared to Linac2 and without the need for a long installation of the 160 MeV H- injection hardware. Benchmarking of the PSB injection model with the existing injection system with Linac2 using the ORBIT code has been done for a LHC-type beam and then the injection model was used to estimate the brightness for LHC-typ...

  10. Studies of Space Charge Effects in the Proposed CERN PS2

    Energy Technology Data Exchange (ETDEWEB)

    Qiang, Ji; /LBL, Berkeley; Ryne, Robert; /LBL, Berkeley; De Maria, Riccardo; /Brookhaven; Macridin, Alexandru; /Fermilab; Spentzouris, Panagiotis; /Fermilab; Papaphilippou, Yannis; /CERN; Wienands, Ulrich; /SLAC

    2012-06-22

    A new proton synchrotron, the PS2, is under design study to replace the current proton synchrotron at CERN for the LHC upgrade. Nonlinear space charge effects could cause significant beam emittance growth and particle losses and limit the performance of the PS2. In this paper, we report on studies of the potential space-charge effects at the PS2 using three-dimensional self-consistent macroparticle tracking codes, IMPACT, MaryLie/IMPACT, and Synergia. We will present initial benchmark results among these codes. Effects of space-charge on the emittance growth, especially due to synchrotron coupling, aperture sizes, initial painted distribution, and RF ramping scheme will also be discussed.

  11. The Low-Level Control System for the CERN PS Multi-Turn Extraction Kickers

    CERN Document Server

    Schipper, J; Boucly, C; Carlier, E; Fowler, T; Gaudillet, H; Noulibos, R; Sermeus, L

    2010-01-01

    To reduce the beam losses when preparing high intensity proton beam for the CERN Neutrino to Gran Sasso (CNGS) facility, a new Multi-Turn extraction (MTE) scheme has been implemented in the PS, to replace the present Continuous Transfer (CT) to the SPS. Industrial off-the-shelf components have been used for the low-level part of the MTE kicker control system. National Instruments PXI systems are used to control the high voltage pulse generators and a SIEMENS programmable logic controller (PLC) handles the centralised oil cooling and gas insulation sub-systems

  12. Prospect for Charge Current Neutrino Interactions Measurements at the CERN-PS

    CERN Document Server

    Bernardini, P; Bozza, C; Brugnera, R; Cecchetti, A; Cecchini, S; Collazuol, G; Corso, F Dal; De Mitri, I; De Serio, M; Di Ferdinando, D; Dore, U; Dusini, S; Fabbricatore, P; Fanin, C; Fini, R A; Garfagnini, A; Grella, G; Kose, U; Laveder, M; Loverre, P; Longhin, A; Marsella, G; Mancarella, G; Mandrioli, G; Mauri, N; Medinaceli, E; Mezzetto, M; Muciaccia, M T; Orecchini, D; Paoloni, A; Pastore, A; Patrizii, L; Pozzato, M; Rescigno, R; Rosa, G; Simone, S; Sioli, M; Sirri, G; Spurio, M; Stanco, L; Stellacci, S; Surdo, A; Tenti, M; Togo, V

    2011-01-01

    Tensions in several phenomenological models grew with experimental results on neutrino/antineutrino oscillations at Short-Baseline (SBL) and with the recent, carefully recomputed, antineutrino fluxes from nuclear reactors. At a refurbished SBL CERN-PS facility an experiment aimed to address the open issues has been proposed [1], based on the technology of imaging in ultra-pure cryogenic Liquid Argon (LAr). Motivated by this scenario a detailed study of the physics case was performed. We tackled specific physics models and we optimized the neutrino beam through a full simulation. Experimental aspects not fully covered by the LAr detection, i.e. the measurements of the lepton charge on event-by-event basis and their energy over a wide range, were also investigated. Indeed the muon leptons from Charged Current (CC) (anti-)neutrino interactions play an important role in disentangling different phenomenological scenarios provided their charge state is determined. Also, the study of muon appearance/disappearance ca...

  13. The application software of the CERN PS accelerator controls system - analysis of its cost and resources

    International Nuclear Information System (INIS)

    The CERN PS accelerators have evolved into one of the world's most sophisticated high energy physics facility. The variety of beams and their high repetition rate means that a most sophisticated controls system is required. This reflects on the application software. At the time of the completion of the new control system, nearly 1000 programs, amounting to around 450 000 lines of code, have been developed at the cost of approximately 120 man-years. The span of this software ranges from real-time application programs to special purpose development and management tools. This paper documents the cost, resources and production of this software project. These are analyzed in terms of the structure of the application software. Rules-of-thumb are suggested for estimating the required effort at various phases of the project and to define the implementation strategy. (orig.)

  14. A Directory Service for the CERN PS/SL Java Programming Interface

    International Nuclear Information System (INIS)

    The CERN PS and SL accelerator control groups developed a common application programming interface (API) in Java [1]. Part of this API is a directory service that provide information about the underlying hardware and software. With this information, it is possible to write generic programs that do general actions on lists of devices without hard coding of device names. And, starting from a device name, full details about related devices, the device itself and its class and properties, can be obtained, including the meaning of bits and bit-patterns in status words. The interface definition is independent of any implementation but a reference implementation is provided using Java Database Connectivity (JDBC) against a set of tables in a relational database. Data from very different systems can be brought together and presented in a uniform way to the user. The full potential of the directory service is reached when it is used in software components (Java Beans)

  15. A Directory Service for the CERN PS/SL Java Programming Interface

    CERN Document Server

    Charrue, P; Di Maio, F; Kostro, K; Watson, W

    1999-01-01

    The CERN PS and SL accelerator control groups developed a common application programming interface (API) in Java [1]. Part of this API is a directory service that provides information about the underlying hardware and software. With this information it is possible to write generic programs that do general actions on lists of devices without hard coding of device names. And, starting from a device name, full details about related devices, the device itself and its class and properties, can be obtained, including the meaning of bits and bitpatterns in status words. The interface definition is independent of any implementation but a reference implementation is provided using Java Database Connectivity (JDBC) against a set of tables in a relational database. Data from very different systems can be brought together and presented in a uniform way to the user. The full potential of the directory service is reached when it is used in software components (Java Beans).

  16. New Control Structure of the 10 MHz RF System in the CERN PS

    CERN Document Server

    Damerau, H

    2013-01-01

    The 10MHz cavities comprise the main RF system in the CERN PS and the only one that allows acceleration. In total 11 tunable cavities (10 operational and a hot spare, grouped into 3+1 tuning groups and up to presently 6 voltage program groups) are distributed all around the circumference of the PS ring. Next to the RF drive signal each of the cavities is controlled by a voltage program and timing pulses to open and close the relays to short-circuit the cavity gaps. These control signals are presently generated by a dedicated hardware matrix. It translates voltage functions and relay timing pulses per cavity group into functions and timings per cavity. However, due to its central position in the RF beam control system, the dedicated hardware matrix can cause significant downtime in case of a major hardware failure. Instead of upgrading the existing obsolete hardware, this note suggests a replacement by standard controls hardware and dedicated application software. Thanks to advanced software concepts like “M...

  17. CERN的ISOLDE装置上的ECR离子剥离器Phoenix的最新进展%Recent Developments on the Phoenix ECR Booster at ISOLDE,CERN

    Institute of Scientific and Technical Information of China (English)

    M.Marie-Jeanne; P.Delahaye

    2007-01-01

    At ISOLDE(CERN),an on-line test bench is dedicated to charge breeding experiments with a 14GHz Phoenix ion source,for the investigation of the 1+→ n+ scenario at next generation ISOL-type facilities.This year,various technical developments have been undertaken for intensifying the tests of the online performances of the booster with a high diversity of stable and radioactive ion beams.This contribution will present an overview of the latest developments,the current challenges,and some perspectives for the future use of the Phoenix booster for physics experiments at ISOLDE.

  18. The Booster

    CERN Multimedia

    1972-01-01

    Where the beams from the Booster's four rings begin to recombine, before transfer to the PS. On the left are dipoles for vertical steering, and on the right is the tank containing two septum magnets which form the first combining element.

  19. Design of Injection and Extraction Systems with Optimisation of Lattice and Layout for the CERN PS2 Synchrotron

    CERN Document Server

    Bartmann, W

    2009-01-01

    The CERN Proton Synchrotron PS2 is one of the foreseen accelerators for the LHC injector upgrade. This upgrade aims first at increasing the instantaneous luminosity of LHC and second at providing a reliable beam for the CERN accelerator complex. From this aspect, the main characteristics of the PS2 are high reliability for high intensity beams. The goal of this thesis was the design of the machine’s lattice and injection/extraction systems meeting the constraints coming mainly from the LHC beam type but also from beam requirements of experiments at PS2 and the SPS. In the design, the given energy range together with filling schemes for different beam types and RF cogging were first used to define the circumference of the machine. Estimates on the space requirements of injection/extraction systems were made in order to divide the total machine length between arc and long straight section. Existing tunnels for transfer lines together with the minimisation of the total transfer line length favoured a race trac...

  20. LS1 Report: first beams in the Booster

    CERN Multimedia

    Anaïs Schaeffer

    2014-01-01

    On Monday, 2 June, the Operations Group injected the first beams into the PS Booster (PSB). The PSB, the second machine in the LHC injector chain to be recommissioned (Linac2 was the first), also provides beams for non-LHC experiments, some of which will need beams for physics as early as this summer.   The PS Booster. The Operations Group has been back in control of the PS Booster for a month now, having taken over where the engineers and experts of the EN Department, who were responsible for the maintenance work, left off. The group first ran tests with no beam (known as “cold check-out”) to check and requalify all the machine instrumentation, from the control room to the ring itself. Now in beam mode, the Booster is being prepared both to begin supplying the PS at the end of June and, above all, for physics to restart in the ISOLDE experimental area. The PS Booster console in the CERN Control Centre. “We have around 15 types of beams to ‘prepa...

  1. Beam Tests and Plans for the CERN PS Transverse Damper System

    CERN Document Server

    Blas, A; Sterbini, G

    2013-01-01

    The CERN Proton Synchrotron (CPS) has been running without any transverse damping equipment since 1998, thanks to the stabilizing effect of the linear coupling applied between horizontal and vertical planes. \

  2. Nouvelle application de control des cavités 200 MHz RF du PS (CERN)

    CERN Document Server

    Cotte, D

    2011-01-01

    Le système Radio Fréquence (RF) 200MHz du PS est un outil essentiel pour la préparation des faisceaux haute intensité du PS. Dans l’anneau PS on trouve 6 cavités 200 MHz utilisées pour contrôler : • l’émittance longitudinale des « bunches » • le processus de « Rebunching » du faisceau avant de l’envoyer au SPS. Chaque cavité est pilotée par des événements appelés « timing » et suit une fonction de tension programmée. Cependant, l’électronique utilisée pour piloter les cavités 200 MHz du PS est obsolète et sa fiabilité non garantie pour cause du manque de pièces de rechange. Ce document décrit le fonctionnement du nouveau programme d’application qui fait abstraction de l’ancienne matrice hardware. Elle suit les recommandations décrites dans l’étude d’une nouvelle structure pour le système RF 200MHz du PS. [1

  3. The Proton Beams for the New Time-of-Flight Neutron Facility at the CERN-PS

    CERN Document Server

    Cappi, R; Métral, G

    2000-01-01

    The experimental determination of neutron cross sections in fission and capture reactions as a function of the neutron energy is of primary importance in nuclear physics. Recent developments at CERN and elsewhere have shown that many fields of research and development, such as the design of Accelerator-Driven Systems (ADS) for nuclear waste incineration, nuclear astrophysics, fundamental nuclear physics, dosimetry for radiological protection and therapy, would benefit from a better knowledge of neutron cross sections. A neutron facility at the CERN-PS has been proposed with the aim of carrying out a systematic and high resolution study of neutron cross sections through Time-Of-Flight (n-TOF) measurement. The facility requires a high intensity proton beam (about 0.7x1013 particles/bunch) distributed in a short bunch (about 25 ns total length) to produce the neutrons by means of a spallation process in a lead target. To achieve these characteristics, a number of complex beam gymnastics have to be performed. All...

  4. Multi-turn Extraction system of the PS at CERN: information management and planning

    OpenAIRE

    Vergara Fernández, Rocío

    2007-01-01

    CERN es el Consejo Europeo de la Investigación Nuclear. Es el mayor laboratorio de física de partículas, donde científicos de todo el mundo estudian la estructura de la materia y las fuerzas que las mantienen unidas para así conseguir entender mejor el comportamiento y el origen del Universo. Actualmente se está construyendo el mayor acelerador del mundo (ya en su fase de puesta en marcha), el Large Hadron Collider (LHC) situado en la frontera franco-suiza, ocupando un túnel 27...

  5. Replacing the Beam Dump at the Booster

    CERN Multimedia

    2013-01-01

    The PS Booster Dump, designed in the 1960’s to cope with beam energies in the order of 800 MeV, has been dismantled and replaced with a new one, capable of withstanding the 2 GeV beam provided by the upcoming LINAC4 at CERN. This video shows the installation of that new dump core inside a one-metre diameter cavity, surrounded by five shielding rings made of concrete and steel. It is the culmination of months of preparation, an interdisciplinary work involving several teams from the Engineering, Beams and Technology Departments, as well as the collaboration and supervision of radio-protection experts.

  6. Measurement of the mean radial position of a lead ion beam in the CERN PS

    CERN Document Server

    Belleman, J; González, J; Johnston, S; Schulte, E C; Thivent, E

    1996-01-01

    The intensity of the lead ion beam in the PS, nominally 4×108 charges of Pb53+ per bunch, is too low for the closed orbit measurement system. However, for successful acceleration it is sufficient to know the mean radial position (MRP). A system was thus designed for simultaneous acquisition of revolution frequency and magnetic field. The frequency measurement uses a direct digital synthesiser (DDS), phase-locked to the beam signal from a special high-sensitivity pick-up. The magnetic field is obtained from the so-called B-train. From these two values, the MRP is calculated. The precision depends on the frequency measurement and on the accuracy of the value for the magnetic field. Furthermore, exact knowledge of the transition energy is essential. This paper describes the hardware and software developed for the MRP system, and discusses the issue of calibration, with a proton beam, of the B measurement.

  7. Updated DIRAC spectrometer at CERN PS for the investigation of ππ and πK atoms

    CERN Document Server

    Adeva, B; Allkofer, Y; Amsler, C; Anania, A; Aogaki, S; Benelli, A; Brekhovskikh, V; Caragheorgheopol, Gh; Cechak, T; Chiba, M; Chliapnikov, P; Ciocarlan, C; Constantinescu, S; Detraz, C; Doskarova, P; Drijard, D; Dudarev, A; Duma, M; Dumitriu, D; Fluerasu, D; Gorin, A; Gorchakov, O; Gritsay, K; Guaraldo, C; Gugiu, M; Hansroul, M; Hons, Z; Horikawa, S; Iwashita, Y; Karpukhin, V; Kluson, J; Kobayashi, M; Kruglov, V; Kruglova, L; Kulikov, A; Kulish, E; Kuptsov, A; Lamberto, A; Lanaro, A; Lednicky, R; Mariñas, C; Martincik, J; Nemenov, L; Nikitin, M; Okada, K; Olchevskii, V; Pentia, M; Penzo, A; Plo, M; Prusa, P; Rappazzo, G F; Romero Vidal, A; Ryazantsev, A; Rykalin, V; Saborido, J; Schacher, J; Sidorov, A; Smolik, J; Takeutchi, F; Tauscher, L; Trojek, T; Trusov, S; Ullaland, O; Urban, T; Vrba, T; Yazkov, V; Yoshimura, Y; Zhabitsky, M; Zrelov, P

    2015-01-01

    The DIRAC spectrometer installed at CERN PS was redesigned and upgraded in order to study simultaneously Aππ and AπK atoms, namely the bound states of π+π–, and π+K–, π–K+ mesons. The detector system which is able to accept a high intensity beam such as 2 - 6 × 1011 primary protons per second, the electronics and the data-acquisition system adapted to handle very large amount of data actually allowed to identify successfully π, K, p, e and µ and to give the possibility to select π-π and π-K pairs in the off-line analysis. The setup’s capability of giving a high resolution in the reconstruction of the relative momentum in the pair-CMS Q gave the possibility to analyze the distributions of its components, in order to identify the signal from pairs originating from hadronic atoms, and to measure their lifetimes in the ground state and π-π and π-K s-wave scattering lengths. The setup also allowed to study long-lived excited states of π-π atoms.

  8. Forward production of charged pions with incident $\\pi^{\\pm}$ on nuclear targets measured at the CERN PS

    CERN Document Server

    Apollonio, M; Bagulya, A; Barr, G; Blondel, A; Bobisut, F; Bogomilov, M; Bonesini, M; Booth, C; Borghi, S; Bunyatov, S; Burguet-Castell, J; Catanesi, M G; Cervera-Villanueva, A; Chimenti, P; Coney, L; Di Capua, E; Dore, U; Dumarchez, J; Edgecock, R; Ellis, M; Ferri, F; Gastaldi, U; Giani, S; Giannini, G; Gibin, D; Gilardoni, S; Gorbunov, P; Gössling, C; Gómez-Cadenas, J J; Grant, A; Graulich, J S; Grégoire, G; Grichine, V; Grossheim, A; Guglielmi, A; Howlett, L; Ivanchenko, A; Ivanchenko, V; Kayis-Topaksu, A; Kirsanov, M; Kolev, D; Kransnoperov, A; Martín-Albo, J; Meurer, C; Mezzetto, M; Mills, G B; Morone, M C; Novella, P; Orestano, D; Palladino, V; Panman, J; Papadopoulos, I; Pastore, F; Piperov, S; Polukhina, N; Popov, B; Prior, G; Radicioni, E; Schmitz, D; Schtoeter, R; Skoro, G; Sorel, M; Tcherniaev, E; Temnikov, P; Tereschenko, V; Tonazzo, A; Tortora, L; Tsenov, R; Tsukerman, I; Vidal-Sitjes, G; Wiebusch, C; Zucchelli, P

    2009-01-01

    Measurements of the double-differential $\\pi^{\\pm}$ production cross-section in the range of momentum 0.5 GeV/c < p < 8.0 GeV/c and angle 0.025 rad < theta < 0.25 rad in interactions of charged pions on beryllium, carbon, aluminium, copper, tin, tantalum and lead are presented. These data represent the first experimental campaign to systematically measure forward pion hadroproduction. The data were taken with the large acceptance HARP detector in the T9 beam line of Incident particles, impinging on a 5% nuclear interaction length target, were identified by an elaborate system of beam detectors. The tracking and identification of the produced particles was performed using the forward spectrometer of the HARP detector. Results are obtained for the double-differential cross-sections mainly at four incident pion beam momenta (3 GeV/c, 5 GeV/c, 8 GeV/c and 12 GeV/c). The measurements are compared with the GEANT4 and MARS Monte Carlo simulation. the CERN PS.

  9. Electron-cloud simulation studies for the CERN-PS in the framework of the LHC Injectors Upgrade project

    CERN Document Server

    Rioja Fuentelsaz, Sergio

    The present study aims to provide a consistent picture of the electron cloud effect in the CERN Proton Synchrotron (PS) and to investigate possible future limitations due to the requirements foreseen by the LHC Injectors Upgrade (LIU) project. It consists of a complete simulation survey of the electron cloud build-up in the different beam pipe sections of the ring depending on several controllable beam parameters and vacuum chamber surface properties, covering present and future operation parameters. As the combined function magnets of the accelerator constitute almost the $80\\%$ in length of the ring, the implementation of a new feature for the simulation of any external magnetic field on the PyECLOUD code, made it possible to perform this study. All the results of the simulations are given as a function of the vacuum chamber surface properties in order to deduce them, both locally and globally, when compared with experimental data. In a first step, we characterize locally the maximum possible number of ...

  10. New safety training for access to the PS complex areas

    CERN Multimedia

    2012-01-01

    Since 10/08/2012, a new course dedicated to the specific radiological risks in the accelerators of the PS complex has been available on SIR (https://sir.cern.ch/). This course complements the general classroom-based Radiation Safety training. Successful completion of the course will be obligatory and verified by the access system as from 01/11/2012 for access to the following accelerator areas: LINAC2, BOOSTER, PS and TT2. Information and reminder e-mails will be sent to all persons currently authorized to access the accelerators of the PS complex. For questions please contact the HSE unit and in particular, the Radiation Protection Group (+41227672504 or safety-rp-ps-complex@cern.ch).

  11. Cern

    CERN Multimedia

    2009-01-01

    "La réparation de l'accélérateur géant de particules LHC, qui devrait redémarrer mi-novembre aprés une panne de plus d'un an, a coûté 23 millions d'euros, selon un haut responsable du Centre européen de recherche nucléaire (CERN), cité vendredi par les médias espagnols" (1 paragraph)

  12. CERN Central Library : 2000 year old technology transfer. Two fragments of columns from a Roman building discovered during excavations for the PS in 1956 have prominent places in the Library where they can be enjoyed by all

    CERN Multimedia

    Laurent Guiraud

    2001-01-01

    CERN Central Library : 2000 year old technology transfer. Two fragments of columns from a Roman building discovered during excavations for the PS in 1956 have prominent places in the Library where they can be enjoyed by all

  13. Mapping of the thermal neutron distribution in the lead block assembly of the PS-211 experiment at CERN, using thermoluminescence and nuclear track detectors

    CERN Document Server

    Savvidis, E; Kitis, G

    2002-01-01

    The main purpose of the TARC (transmutation by adiabatic resonance crossing) experiment (PS-211), was to demonstrate the possibility to destroy efficiently long-lived fission fragments (LLFF) in accelerator driven systems (ADS). The experimental set-up which consisted of a lead block with dimensions 3.3 * 3.3 * 3 m/sup 3/, was installed in a CERN proton synchrotron (PS) beam line. The proton beam at 2.5 GeV/c and 3.5 GeV/c, was incident in the centre of the lead block assembly producing neutrons via spallation reactions. Neutron flux measurements are presented in the lead block assembly using thermoluminescence and nuclear track detectors. The results are in good agreement with Monte Carlo calculations as well as with the results of the other methods used in the framework of the TARC experiment. (5 refs).

  14. Mapping of the thermal neutron distribution in the lead block assembly of the PS-211 experiment at CERN, using thermoluminescence and nuclear track detectors.

    Science.gov (United States)

    Savvidis, E; Eleftheriadis, C A; Kitis, G

    2002-01-01

    The main purpose of the TARC (Transmutation by Adiabatic Resonance Crossing) experiment (PS-211), was to demonstrate the possibility to destroy efficiently Long-Lived Fission Fragments (LLFF) in Accelerator Driven Systems (ADS). The experimental set-up which consisted of a lead block with dimensions 3.3 x 3.3 x 3 m3, was installed in a CERN Proton Synchrotron (PS) beam line. The proton beam at 2.5 GeV/c and 3.5 GeV/c, was incident in the centre of the lead block assembly producing neutrons via spallation reactions. In this study, neutron flux measurements are presented in the lead block assembly using thermoluminescence and nuclear track detectors. The results are in good agreement with Monte Carlo calculations as well as with the results of the other methods used in the framework of the TARC experiment.

  15. PS complex

    CERN Multimedia

    1972-01-01

    A view of the present PS complex taken at the end of 1972. The earth embankment covering the Ring is clearly visible; in the foreground are the North and South Experimental Halls; to the right is the East Hall, and to the left the Booster surface buildings. The West Hall is too far to the left to seen, and also invisible is the SPS being constructed.

  16. Determination of the Neutron Fluence, the Beam Characteristics and the Backgrounds at the CERN-PS TOF Facility

    CERN Multimedia

    Leal, L C; Kitis, G; Guber, K H; Quaranta, A; Koehler, P E

    2002-01-01

    In the scope of our programme we propose to start in July 2000 with measurements on elements of well known cross sections, in order to check the reliability of the whole experimental installation at the CERN-TOF facility. These initial exploratory measurements will provide the key-parameters required for the further experimentation at the CERN-TOF neutron beam. The neutron fluence and energy resolution will be determined as a function of the neutron kinetic energy by reproducing standard capture and fission cross sections. The measurements of capture cross sections on elements with specific cross section features will allow to us to disentangle the different components of backgrounds and estimate their level in the experimental area. The time-energy calibration will be determined and monitored with a set of monoenergetic filters as well as by the measurements of elements with resonance-dominated cross sections. Finally, in this initial phase the behaviour of several detectors scheduled in successive measureme...

  17. Intensity effects in the formation of stable islands in phase space during the multi-turn extraction process at the CERN PS

    CERN Document Server

    machida, Shinji; Prior, Chris; Gilardoni, Simone; Giovannozzi, Massimo; Hirlander, Simon; Huschauer, Alexander

    2016-01-01

    The CERN PS utilises a Multi-Turn Extraction (MTE) scheme to stretch the beam pulse length to optimise the filling process of the SPS. MTE is a novel technique to split a beam in transverse phase space into nonlinear stable islands. The recent experimental results indicate that the positions of the islands depend on the total beam intensity. Particle simulations have been performed to understand the detailed mechanism of the intensity dependence. The analysis carried out so far suggests space charge effects through image charges and image currents on the vacuum chamber and the magnets iron cores dominate the observed behaviour. In this talk, the latest analysis with realistic modelling of the beam environment is discussed and it is shown how this further improves the understanding of intensity effects in MTE.

  18. The CERN PS multi-turn extraction based on beam splittting in stable islands of transverse phase space Design Report

    CERN Document Server

    Barnes, M J; Berrig, O E; Beuret, A; Borburgh, J; Bourquin, P; Brown, R; Burnet, Jean Paul; Caspers, Friedhelm; Cravero, J M; Dobers, T; Fowler, T; Gilardoni, S S; Hourican, M; Kalbreier, Willi; Kroyer, T; Di Maio, F; Martini, M; Mertens, V; Métral, E; Metzmacher, K D; Rossi, C; Royer, J P; Sermeus, L; Steerenberg, R; Villiger, G; Zickler, T

    2006-01-01

    Since 2001 considerable effort has been devoted to the study of a possible replacement of the continuous-transfer extraction mode from the PS to the SPS. Such an approach, called Multi-Turn Extraction (MTE), is based on capture of the beam inside stable islands of transverse phase space, generated by sextupoles and octupoles, thanks to a properly chosen tune variation. Both numerical simulations and measurements with beam were performed to understand the properties of this new extraction mode. The experimental study was completed at the end of 2004 and by the end of 2005 a scheme to implement this novel approach in the PS machine was defined and its performance assessed. This design report presents the outcome of the studies undertaken both in terms of technical issues as well as of resources necessary to implement the proposed scheme.

  19. Excitation of Longitudinal Coupled-bunch Oscillations with the Wide-band Cavity in the CERN PS

    CERN Document Server

    Ventura, Letizia; Migliorati, Mauro; Sterbini, Guido

    2016-01-01

    Longitudinal coupled-bunch oscillations in the CERN Proton Synchrotron have been studied in the past years and they have been recognized as one of the major challenges to reach the high brightness beam required by the High Luminosity LHC project. In the frame of the LHC Injectors Upgrade project in 2014 a new wide-band Finemet cavity has been installed in the Proton Synchrotron as a part of the coupled-bunch feedback system. To explore the functionality of the Finemet cavity during 2015 a dedicated measurement campaign has been performed. Coupled-bunch oscillations have been excited with the cavity around each harmonic of the revolution frequency with both a uniform and nominal filling pattern. In the following the measurements procedure and results are presented.

  20. CERN Heavy-Ion Facility design report

    International Nuclear Information System (INIS)

    The design of the CERN Heavy-Ion Facility is described. This facility will be based on a new ion linear accelerator (Linac 3), together with improvements to the other accelerators of the CERN complex to allow them to cope with heavy ions, i.e. to the Proton Synchrotron Booster (PSB), the Proton Synchrotron (PS) and the Super Proton Synchrotron (SPS). For this reference design, the pure isotope of lead, 208Pb, is considered. The bulk of the report describes Linac 3, a purpose-built heavy-ion linac mainly designed and constructed in collaboration with several CERN member state laboratories, but also with contributions from non-member states. Modifications and improvements to existing CERN accelerators essentially concern the RF acceleration, beam control and beam monitoring (all machines), beam kickers and septa at the input and output of the PSB, and major vacuum improvements, aiming to reduce the pressure by factors of at least seven and three in the PSB and PS respectively. After injection from the Electron Cyclotron Resonance source at 2.5 keV/u the partially stripped heavy-ion beam is accelerated successively by a Radio Frequency Quadrupole and an Interdigital-H linac to 4.2 MeV/u. After stripping to 208Pb53+, the beam is again accelerated, firstly in the PSB (to 98.5 MeV/u), then in the PS (to 4.25 GeV/u). The final stage of acceleration in the SPS takes the fully stripped 208Pb82+ ions to 177 GeV/u, delivering a beam of 4.108 ions per SPS supercycle (15.2 s) to the experiments. The first physics run with lead ions is scheduled for the end of 1994. Finally, some requirements for carrying out heavy-ion physics at the Large Hadron Collider are mentioned. (orig.)

  1. CERN OVERVIEW animation

    CERN Multimedia

    Arzur Catel Torres

    2015-01-01

    This animation shows how the Large Hadron Collider (LHC) works. The film begins with an aerial view of CERN near Geneva, with outlines of the accelerator complex, including the underground Large Hadron Collider (LHC), 27-km in circumference. The positions of the four largest LHC experiments, ALICE, ATLAS, CMS and LHCb are revealed before we see protons travelling around the LHC ring. The proton source is a simple bottle of hydrogen gas. An electric field is used to strip hydrogen atoms of their electrons to yield protons. Linac 2, the first accelerator in the chain, accelerates the protons to the energy of 50 MeV. The beam is then injected into the Proton Synchrotron Booster (PSB), which accelerates the protons to 1.4 GeV, followed by the Proton Synchrotron (PS), which pushes the beam to 25 GeV. Protons are then sent to the Super Proton Synchrotron (SPS) where they are accelerated to 450 GeV. The protons are finally transferred to the two beam pipes of the LHC. The beam in one pipe circulates clockwise while ...

  2. Immunity booster

    International Nuclear Information System (INIS)

    The immunity booster is, according to its patent description, microbiologically pure water with an D/(D+H) isotopic concentration of 100 ppm, with physical-chemical characteristics similar to those of distilled water. It is obtained by sterilization of a mixture of deuterium depleted water, with a 25 ppm isotopic concentration, with distilled water in a volume ratio of 4:6. Unlike natural immunity boosters (bacterial agents as Bacillus Chalmette-Guerin, Corynebacterium parvum; lipopolysaccharides; human immunoglobulin) or synthetical products (levamysol; isoprinosyne with immunostimulating action), which cause hypersensitivity and shocks, thrill, fever, sickness and the immunity complex disease, the water of 100 ppm D/(D + H) isotopic concentration is a toxicity free product. The testing for immune reaction of the immunity booster led to the following results: - an increase of cell action capacity in the first immunity shielding stage (macrophages), as evidenced by stimulation of a number of essential characterizing parameters, as well as of the phagocytosis capacity, bactericide capacity, and opsonic capacity of serum; - an increase of the number of leucocyte particularly of the granulocyte in peripheral blood, produced especially when medullar toxic agents like caryolysine are used; - it hinders the effect of lowering the number of erythrocytes in peripheral blood produced by experimentally induced chronic inflammation; - an increase of nonspecific immunity defence capacity against specific bacterial aggression of both Gram-positive bacteria (Streptococcus pneumoniae558) and of the Gram-negative ones (Klebsiella pneumoniae 507); - an increase of immunity - stimulating activity (proinflamatory), like that of levamisole as evidenced by the test of stimulation of experimentally induced inflammation by means of carrageenan. The following advantages of the immunity booster are stressed: - it is toxicity free and side effect free; - can be orally administrated as food

  3. A great start for the whole CERN accelerator chain

    CERN Multimedia

    2016-01-01

    With physics data-taking under way this week at the LHC, I’d like to take a look at what’s been happening at the rest of the CERN accelerator chain.   The LHC tends to dominate the news from CERN for all kinds of reasons, beech martens included, but we should not forget that there is a unique chain of accelerators upstream of the LHC, tended to and operated by an incredible group of people. If our whole accelerator chain does not work perfectly, nor can the LHC, and in addition to forming the LHC’s injector chain, our upstream accelerators support their own experiments, bringing great diversity to the CERN research programme. The chain begins with the proton source and Linac2, which have been faithfully delivering beams since 1978. This year, Linac2 accelerated its first beams on 29 February. Beams were then passed on to the PS Booster and the veteran PS, the linchpin of the CERN accelerator complex and in operation since 1959. The final link in the chain before the ...

  4. CERN : Nouveaux records lors d'une période d'exploitation au PS/SPS ; Un nouveau rôle pour les ISR ; Deuxième région d'intersection pour le système pp du SPS ; Détermination de la durée de vie du charme ; Calcul en Sicile et au CERN

    CERN Multimedia

    1979-01-01

    CERN : Nouveaux records lors d'une période d'exploitation au PS/SPS ; Un nouveau rôle pour les ISR ; Deuxième région d'intersection pour le système pp du SPS ; Détermination de la durée de vie du charme ; Calcul en Sicile et au CERN

  5. Sharing resources@CERN

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    The library is launching a 'sharing resources@CERN' campaign, aiming to increase the library's utility by including the thousands of books bought by individual groups at CERN. This will improve sharing of information among CERN staff and users. Photo 01: L. to r. Eduardo Aldaz, from the PS division, Corrado Pettenati, Head Librarian, and Isabel Bejar, from the ST division, read their divisional copies of the same book.

  6. PS injection area

    CERN Multimedia

    1974-01-01

    Looking against the direction of protons in the main ring (left): the beam coming from the linac 1 either goes to the booster (on the right) or is deflected towards the PS to be directly injected into section 26 (facing the camera). Also shown the start of the TT2 line, ejected from straight section 16 to go towards the ISR passing over the beam line from the linac. (see Photo Archive 7409009)

  7. Ram booster

    Science.gov (United States)

    Brand, Vance D. (Inventor); Morgan, Walter Ray (Inventor)

    2011-01-01

    The present invention is a space launch system and method to propel a payload bearing craft into earth orbit. The invention has two, or preferably, three stages. The upper stage has rocket engines capable of carrying a payload to orbit and provides the capability of releasably attaching to the lower, or preferably, middle stage. Similar to the lower stage, the middle stage is a reusable booster stage that employs all air breathing engines, is recoverable, and can be turned-around in a short time between missions.

  8. CERN Linac4. The space charge challenge

    Energy Technology Data Exchange (ETDEWEB)

    Hein, Lutz Matthias

    2013-08-06

    In the first phase of the upgrade program of the CERN accelerator complex the proton injector Linac2 will be replaced by a new, normal-conducting H-ion Linac, Linac4, allowing a significant increase of the proton flux intensity along the downstream accelerator complex. In the design of Linac4 three beam transport sections are implemented to match the beam between the different accelerator elements and to model the longitudinal pulse structure. These three beam transport sections, which are the most critical locations in terms of beam quality preservation, are in the focus of this thesis. During the work of this thesis the Low Energy Beam Transport (LEBT), which is required to match the source beam to the radiofrequency quadrupole (RFQ), has been commissioned and its beam dynamics re-constructed. The measurement campaign used to reconstruct the LEBT beam dynamics was performed with the aim to prepare the RFQ commissioning and to maximise the LEBT performance. Downstream of the Linac4 accelerator the beam is transported along a 180 m long transfer line to the Proton Synchrotron Booster (PS-Booster). The transfer line optics was studied, optimised and sections were completely re-designed. The new transfer line optics is characterised by an improved preservation of the beam emittance, higher stability of the optical solution with respect to alignment errors and field jitters of the transfer line magnets and it is matched to each of the PS-Booster injection schemes. In a concluding ''Start-To-End'' simulation based on the measured beam characteristics at the LEBT exit the beam dynamics of the downstream Linac, including the transfer line, was calculated. To minimise particle losses within acceptable emittance preservation the beam optics of the Medium Energy Beam Transport (MEBT) was adapted to the measured beam parameters. This ''Start-To-End'' simulation was performed to identify critical sections of the Linac4 beam dynamics and

  9. The LINAC4 Project at CERN

    CERN Document Server

    Arnaudon, L; Bertone, C; Body, Y; Broere, J; Brunner, O; Buzio, M; Carli, C; Caspers, F; Corso, JP; Coupard, J; Dallocchio, A; Dos Santos, N; Garoby, R; Gerigk, F; Hammouti, L; Hanke, K; Jones, M; Kozsar, I; Lettry, J; Lallement, JB; Lombardi, A; Lopez-Hernandez, LA; Maglioni, C; Mathot, S; Maury, S; Mikulec, B; Nisbet, D; Noels, C; Paoluzzi, M; Puccio, B; Raich, U; Ramberger, S; Rossi, C; Schwerg, N; Scrivens, R; Vandoni, G; Weisz, S; Vollaire, J; Vretenar, M; Zickler, T

    2011-01-01

    As the first step of a long-term programme aiming at an increase in the LHC luminosity, CERN is building a new 160 MeV H¯ linear accelerator, Linac4, to replace the ageing 50 MeV Linac2 as injector to the PS Booster (PSB). Linac4 is an 86-m long normal-conducting linac made of an H¯ source, a Radio Frequency Quadrupole (RFQ), a chopping line and a sequence of three accelerating structures: a Drift-Tube Linac (DTL), a Cell-Coupled DTL (CCDTL) and a Pi-Mode Structure (PIMS). The civil engineering has been recently completed, and construction of the main accelerator components has started with the support of a network of international collaborations. The low-energy section up to 3 MeV including a 3-m long 352 MHz RFQ entirely built at CERN is in the final construction phase and is being installed on a dedicated test stand. The present schedule foresees beam commissioning of the accelerator in the new tunnel in 2013/14; the moment of connection of the new linac to the CERN accelerator chain will depend on the L...

  10. Proposal to study $\\overline{p}$-nucleon interactions in the Cern 2m Hydrogen and deuterium BC, with $\\overline{p}$ at the highest energies alowed by the RF separators (10-15 GeV with the present PS intensity) by the Padua and Pisa TC Groups.

    CERN Document Server

    CERN. Geneva. Track Chamber Committee

    1966-01-01

    Proposal to study $\\overline{p}$-nucleon interactions in the Cern 2m Hydrogen and deuterium BC, with $\\overline{p}$ at the highest energies alowed by the RF separators (10-15 GeV with the present PS intensity) by the Padua and Pisa TC Groups.

  11. The historic Proton Synchrotron (PS) control room is about to start a new life. Opened by Niels Bohr in 1960, the room will be reused by CMS to built its control centre. When finished, it will resemble the CERN Control Centre for LHC operations, located in Prevessin.

    CERN Multimedia

    Husi C.

    2007-01-01

    The historic Proton Synchrotron (PS) control room is about to start a new life. Opened by Niels Bohr in 1960, the room will be reused by CMS to built its control centre. When finished, it will resemble the CERN Control Centre for LHC operations, located in Prevessin.

  12. CMS Centre at CERN

    CERN Multimedia

    2007-01-01

    A new "CMS Centre" is being established on the CERN Meyrin site by the CMS collaboration. It will be a focal point for communications, where physicists will work together on data quality monitoring, detector calibration, offline analysis of physics events, and CMS computing operations. Construction of the CMS Centre begins in the historic Proton Synchrotron (PS) control room. The historic Proton Synchrotron (PS) control room, Opened by Niels Bohr in 1960, will be reused by CMS to built its control centre. TThe LHC@FNAL Centre, in operation at Fermilab in the US, will work very closely with the CMS Centre, as well as the CERN Control Centre. (Photo Fermilab)The historic Proton Synchrotron (PS) control room is about to start a new life. Opened by Niels Bohr in 1960, the room will be reused by CMS to built its control centre. When finished, it will resemble the CERN Contro...

  13. Accelerating RF cavity of the Booster

    CERN Multimedia

    1983-01-01

    Each of the 4 PS Booster rings has a single accelerating cavity.It consists of 2 quarter-wave ferrite-loaded resonators. 2 figure-of-eight loops tune the frequency throughout the accelerating cycle, from 3 to 8 MHz (from 50 MeV at injection to the original Booster energy of 800 MeV, 2 GeV today). The cavities have a flat design, to fit the ring-to-ring distance of 36 cm, and are forced-air cooled. The 2 round objects in the front-compartments are the final-stage power-tetrodes. See also 8111095.

  14. Accelerating RF cavity of the Booster

    CERN Multimedia

    CERN PhotoLab

    1981-01-01

    Each of the 4 PS Booster rings has a single accelerating cavity. It consists of 2 quarter-wave ferrite-loaded resonators. There are 2 figure-of-eight loops on the ferrite loads for tuning the frequency throughout the acceleration cycle, from 3 to 8 MHz (from 50 MeV at injection to the original Booster energy of 800 MeV, 2 GeV today). The cavities have a flat design, to fit the ring-to-ring distance of 36 cm. The tube for forced-air cooling is visible in the left front. See also 8301084.

  15. The electron accelerator for the AWAKE experiment at CERN

    Science.gov (United States)

    Pepitone, K.; Doebert, S.; Burt, G.; Chevallay, E.; Chritin, N.; Delory, C.; Fedosseev, V.; Hessler, Ch.; McMonagle, G.; Mete, O.; Verzilov, V.; Apsimon, R.

    2016-09-01

    The AWAKE collaboration prepares a proton driven plasma wakefield acceleration experiment using the SPS beam at CERN. A long proton bunch extracted from the SPS interacts with a high power laser and a 10 m long rubidium vapour plasma cell to create strong wakefields allowing sustained electron acceleration. The electron bunch to probe these wakefields is supplied by a 20 MeV electron accelerator. The electron accelerator consists of an RF-gun and a short booster structure. This electron source should provide beams with intensities between 0.1 and 1 nC, bunch lengths between 0.3 and 3 ps and an emittance of the order of 2 mm mrad. The wide range of parameters should cope with the uncertainties and future prospects of the planned experiments. The layout of the electron accelerator, its instrumentation and beam dynamics simulations are presented.

  16. Sharing resources@CERN

    CERN Multimedia

    2002-01-01

    The library is launching a 'sharing resources@CERN' campaign, aiming to increase the library's utility by including the thousands of books bought by individual groups at CERN. This will improve sharing of information among CERN staff and users. Until now many people were unaware that copies of the same book (or standard, or journal) are often held not only by the library but by different divisions. (Here Eduardo Aldaz, from the PS division, and Isabel Bejar, from the ST division, read their divisional copies of the same book.) The idea behind the library's new sharing resources@CERN' initiative is not at all to collect the books in individual collections at the CERN library, but simply to register them in the Library database. Those not belonging to the library will in principle be unavailable for loan, but should be able to be consulted by anybody at CERN who is interested. "When you need a book urgently and it is not available in the library,' said PS Division engineer Eduardo Aldaz Carroll, it is a sham...

  17. The PS locomotive runs again

    CERN Multimedia

    2001-01-01

    Over forty years ago, the PS train entered service to steer the magnets of the accelerator into place... ... a service that was resumed last Tuesday. Left to right: Raymond Brown (CERN), Claude Tholomier (D.B.S.), Marcel Genolin (CERN), Gérard Saumade (D.B.S.), Ingo Ruehl (CERN), Olivier Carlier (D.B.S.), Patrick Poisot (D.B.S.), Christian Recour (D.B.S.). It is more than ten years since people at CERN heard the rumbling of the old PS train's steel wheels. Last Tuesday, the locomotive came back into service to be tested. It is nothing like the monstrous steel engines still running on conventional railways -just a small electric battery-driven vehicle employed on installing the magnets for the PS accelerator more than 40 years ago. To do so, it used the tracks that run round the accelerator. In fact, it is the grandfather of the LEP monorail. After PS was commissioned in 1959, the little train was used more and more rarely. This is because magnets never break down, or hardly ever! In fact, the loc...

  18. AGS Booster prototype magnets

    Energy Technology Data Exchange (ETDEWEB)

    Danby, G.; Jackson, J.; Lee, Y.Y.; Phillips, R.; Brodowski, J.; Jablonski, E.; Keohane, G.; McDowell, B.; Rodger, E.

    1987-03-19

    Prototype magnets have been designed and constructed for two half cells of the AGS Booster. The lattice requires 2.4m long dipoles, each curved by 10/sup 0/. The multi-use Booster injector requires several very different standard magnet cycles, capable of instantaneous interchange using computer control from dc up to 10 Hz.

  19. submitter Radiation Protection Studies for CERN LINAC4/SPL Accelerator Complex

    CERN Document Server

    Mauro, Egidio; Silari, Marco

    2009-01-01

    CERN is presently designing a new chain of accelerators to replace the present Proton Synchrotron (PS) complex: a 160 MeV room-temperature H$^-$ linac (Linac4) to replace the present 50 MeV proton linac injector, a 3.5 GeV Superconducting Proton Linac (SPL) to replace the 1.4 GeV PS booster (PSB) and a 50 GeV synchrotron (named PS2) to replace the 26 GeV PS. Linac4 has been funded and the civil engineering work started in October 2008, whilst the SPL is in an advanced stage of design. Beyond injecting into the future 50 GeV PS, the ultimate goal of the SPL is to generate a 4 MW beam for the production of intense neutrino beams. The radiation protection design is driven by the latter requirement. This thesis summarizes the radiation protection studies conducted for Linac4. FLUKA Monte Carlo simulations, complemented by analytical estimates, were performed 1) to evaluate the propagation of neutrons through the waveguide, ventilation and cable ducts placed along the accelerator, 2) to estimate the radiological i...

  20. CERN, Geneva

    CERN Multimedia

    2007-01-01

    "The Large Hadron Collider (pages 1-3) is being built at CERN, the European Centre for Nuclear Research near Geneva. CERN offers some extremely exciting opportunities to see "big bang" in action. (1 page)

  1. People and things. CERN Courier, Jun 1979, v. 19(4)

    International Nuclear Information System (INIS)

    On 1 April, six months ahead of schedule, electrons were injected into the 8 GeV electron-positron storage ring, CESR, at Cornell. Two weeks later beam was accumulated at an energy of 5.5 GeV. The contract for the management and construct/on of the conventional facilities of the ISABELLE 400 GeV proton storage rings to be built at the Brookhaven Laboratory has been awarded to the New York firm of Ammann and Whitney. Greatly helped by the quality of the beams from the new linac, the CERN 800 MeV four-ring Booster has achieved several new records which bode well for the role it has to play with the PS in feeding the high energy machines in the coming years

  2. Vertical distributor in the Booster injection line

    CERN Multimedia

    1979-01-01

    The beam from the 50 MeV linac filled the 4 rings of the PS Booster(originally 800 MeV, now 1.4 GeV) one after the other (in multiturn injection). A fast-switchable vertical steering magnet, the "distributor", directed the beam first to the top ring (nb.4), and after a preset number of turns to next lower ring, and so on. After filling the bottom ring, the tail of the linac beam was directed into a dump.

  3. Feasibility Study of the PS Injection for 2 GeV LIU Beams with an Upgraded KFA-45 Injection Kicker System Operating in Short Circuit Mode

    CERN Document Server

    Kramer, Thomas; Borburgh, Jan; Ducimetière, Laurent; Feliciano, Luis; Ferrero Colomo, Alvaro; Goddard, Brennan; Sermeus, Luc

    2016-01-01

    Under the scope of the LIU project the CERN PS Booster to PS beam transfer will be modified to match the requirements for the future 2 GeV beams. This paper describes the evaluation of the proposed upgrade of the PS injection kicker. Different schemes of an injection for LIU beams into the PS have been outlined in the past already under the aspect of individual transfer kicker rise and fall time performances. Homogeneous rise and fall time requirements in the whole PSB to PS transfer chain have been established which allowed to consider an upgrade option of the present injection kicker system operated in short circuit mode. The challenging pulse quality constraints require an improvement of the flat top and post pulse ripples. Both operation modes, terminated and short circuit mode are analysed and analogue circuit simulations for the present and upgraded system are outlined. Recent measurements on the installed kickers are presented and analysed together with the simulation data. First measurements verifying...

  4. High duty factor plasma generator for CERN's Superconducting Proton Linac

    International Nuclear Information System (INIS)

    CERN's Linac4 is a 160 MeV linear accelerator currently under construction. It will inject negatively charged hydrogen ions into CERN's PS-Booster. Its ion source is a noncesiated rf driven H- volume source directly inspired from the one of DESY and is aimed to deliver pulses of 80 mA of H- during 0.4 ms at a 2 Hz repetition rate. The Superconducting Proton Linac (SPL) project is part of the luminosity upgrade of the Large Hadron Collider. It consists of an extension of Linac4 up to 5 GeV and is foreseen to deliver protons to a future 50 GeV synchrotron (PS2). For the SPL high power option (HP-SPL), the ion source would deliver pulses of 80 mA of H- during 1.2 ms and operate at a 50 Hz repetition rate. This significant upgrade motivates the design of the new water cooled plasma generator presented in this paper. Its engineering is based on the results of a finite element thermal study of the Linac4 H- plasma generator that identified critical components and thermal barriers. A cooling system is proposed which achieves the required heat dissipation and maintains the original functionality. Materials with higher thermal conductivity are selected and, wherever possible, thermal barriers resulting from low pressure contacts are removed by brazing metals on insulators. The AlN plasma chamber cooling circuit is inspired from the approach chosen for the cesiated high duty factor rf H- source operating at SNS.

  5. High duty factor plasma generator for CERN's Superconducting Proton Linac.

    Science.gov (United States)

    Lettry, J; Kronberger, M; Scrivens, R; Chaudet, E; Faircloth, D; Favre, G; Geisser, J-M; Küchler, D; Mathot, S; Midttun, O; Paoluzzi, M; Schmitzer, C; Steyaert, D

    2010-02-01

    CERN's Linac4 is a 160 MeV linear accelerator currently under construction. It will inject negatively charged hydrogen ions into CERN's PS-Booster. Its ion source is a noncesiated rf driven H(-) volume source directly inspired from the one of DESY and is aimed to deliver pulses of 80 mA of H(-) during 0.4 ms at a 2 Hz repetition rate. The Superconducting Proton Linac (SPL) project is part of the luminosity upgrade of the Large Hadron Collider. It consists of an extension of Linac4 up to 5 GeV and is foreseen to deliver protons to a future 50 GeV synchrotron (PS2). For the SPL high power option (HP-SPL), the ion source would deliver pulses of 80 mA of H(-) during 1.2 ms and operate at a 50 Hz repetition rate. This significant upgrade motivates the design of the new water cooled plasma generator presented in this paper. Its engineering is based on the results of a finite element thermal study of the Linac4 H(-) plasma generator that identified critical components and thermal barriers. A cooling system is proposed which achieves the required heat dissipation and maintains the original functionality. Materials with higher thermal conductivity are selected and, wherever possible, thermal barriers resulting from low pressure contacts are removed by brazing metals on insulators. The AlN plasma chamber cooling circuit is inspired from the approach chosen for the cesiated high duty factor rf H(-) source operating at SNS.

  6. CERN Choir

    CERN Multimedia

    Staff Association

    2015-01-01

      Do you like singing? The CERN Choir is looking for basses and tenors Join us! Programme Spring Session 2015: Donizetti: Misere & Missa di Gloria e Credo Bellini: Salve Regina Bruckner: Requiem in D minor Next concert: Sunday 31 May 2015 at 17:00 Musicales de Comesières (GE) Rehearsals at CERN Main Auditorium, building 500 On Wednesdays from 20.00 to 22:00 Membership fee: January to June 150 CHF September to December: 100CHF Contact: Baudouin.bleus@cern.ch Facebook/Choeur-du-CERN

  7. PS Main Control Room (partial view)

    CERN Multimedia

    1974-01-01

    Jean-Pierre Potier (turning buttons) and Bertran Frammery (telephoning) on shift. The 26 GeV Synchrotron and later also its related machines (Linacs 1,2,3; PS-Booster; LEP-Injector Linacs and Electron-Positron Accumulator; Antiproton Accumulator, Antiproton Collector, Low Energy Antiproton Ring and more recently Antiproton Decelerator) were all controlled from the PS control room situated on the Meyrin site. The SPS and LEP were controlled from a separat control centre on the Prevessin site. In 2005 all controls were transferred to the Prevessin centre.

  8. YALINA Booster conversion project

    International Nuclear Information System (INIS)

    The YALINA Booster subcritical assembly was constructed at the Joint Institute for Power and Nuclear Research (JIPNR)-SOSNY, Belarus to examine the physics of Accelerator Driven Systems (ADS). The assembly has fast and thermal zones to study the coupling between the two zones, the transuranics transmutation, and the ADS kinetics. It is driven by external neutron source located at the assembly center. The central fast zone (the booster zone) consists of high enriched uranium (HEU) fuel rods loaded in a lead matrix and it is surrounded by thermal zone. The thermal zone has low enriched uranium (LEU) fuel rods loaded in polyethylene moderator. Between the two zones, there is a thermal neutron absorber zone. (JIPNR)-SOSNY has an International Science and Technology Center project in collaboration with Argonne National Laboratory of USA to convert the HEU fuel of YALINA Booster to LEU fuel without penalizing its performance. The first step of this project is to characterize and define the performance of the YALINA Booster subcritical assembly with HEU fuel by performing detailed analytical and experimental studies. The second step is to convert the booster zone to use uranium fuel rods with 21% enrichment. The YALINA Booster configuration is modified to reach the original subcriticality level. The analytical analyses have developed accurate calculational models without geometrical approximations for performing Monte Carlo and Deterministic calculations. MCNP, MCNPX, MCB, MONK, ERANOS, and PARTISN computer codes with different nuclear data libraries based on ENDF/VI, JEF2.2, and JEF3.1 have been used for static and kinetic analyses. The geometrical details are included explicitly without approximation or homogenization. In the experimental program, the subcriticality has been measured as a function of the number of the fuel rods loaded in the subcritical assembly. Different methods have been used to measure the assembly subcriticality during the fuel loading process. In

  9. Courrier CERN

    CERN Multimedia

    2015-01-01

    Example of the cover page of the French version of the CERN Courier; Courrier CERN from January 1962. The journal was published both in English and French up to volume 45, no. 5, June 2005. Since then there is a single-language edition where articles are published either in French or English with an abstract in the other language.

  10. CERN & Society

    CERN Multimedia

    2016-01-01

    Non Member State Summer Students 2015 are interviewed about their decision to study STEM subjects, to apply for CERN NMSSS programme, their experience onsite @CERN and takeaways, their future goals and aspirations, offering also advice to fellow students.The Non Member State Summer Student Programme stands for a unique opportunity for students from all over the world to spend their summer at CERN in Geneva, getting involved in some of the world’s biggest experiments. For 8 weeks, summer students gather on-site at CERN and join in the day-to-day work of research. The Programme targets advanced undergraduate and beginning graduate students of physics, computing and engineering, particularly from developing countries. Participating students receive scientific training, attend lectures and work on laboratory-based projects alongside with CERN experts and fellow students.

  11. Booster parameter list

    Energy Technology Data Exchange (ETDEWEB)

    Parsa, Z.

    1986-10-01

    The AGS Booster is designed to be an intermediate synchrotron injector for the AGS, capable of accelerating protons from 200 MeV to 1.5 GeV. The parameters listed include beam and operational parameters and lattice parameters, as well as parameters pertaining to the accelerator's magnets, vacuum system, radio frequency acceleration system, and the tunnel. 60 refs., 41 figs. (LEW)

  12. CERN Rocks

    CERN Multimedia

    2004-01-01

    The 15th CERN Hardronic Festival took place on 17 July on the terrace of Rest 3 (Prévessin). Over 1000 people, from CERN and other International Organizations, came to enjoy the warm summer night, and to watch the best of the World's High Energy music. Jazz, rock, pop, country, metal, blues, funk and punk blasted out from 9 bands from the CERN Musiclub and Jazz club, alternating on two stages in a non-stop show.  The night reached its hottest point when The Canettes Blues Band got everybody dancing to sixties R&B tunes (pictured). Meanwhile, the bars and food vans were working at full capacity, under the expert management of the CERN Softball club, who were at the same time running a Softball tournament in the adjacent "Higgs Field". The Hardronic Festival is the main yearly CERN music event, and it is organized with the support of the Staff Association and the CERN Administration.

  13. Experiments at CERN in 1984

    International Nuclear Information System (INIS)

    This book is a compilation of the current experimental program at CERN. The experiments listed are being performed at one of the following machines: the Super Proton Synchrotron (SPS), the Proton Synchrotron (PS) and the Synchro-Cyclotron (SC). The Intersecting Storage Rings (ISR) have ceased functioning early this year. The four approved experiments to be done by means of the Large Electron Positron machine (LEP) are also listed. (orig./HSI)

  14. Space Shuttle booster recovery planning.

    Science.gov (United States)

    Godfrey, R. E.

    1973-01-01

    At the initiation of the Space Shuttle Program, recoverable solid rocket boosters were base-lined, with an estimated savings of 30 per cent over expendable solid rockets. Present studies indicate that the solid rocket boosters in the 142-inch diameter range can be recovered using state-of-the-art recovery systems. Marshall Space Flight Center is conducting extensive studies to establish the most cost effective recovery system for the present Shuttle boosters. Model drop testing, in various facilities, and structural load testing are being conducted with model sizes ranging from 6 inches to 120 inches in diameter.

  15. Inside CERN : Devoiler l'inaccessible

    CERN Multimedia

    Denis Postle; Edwin Shaw

    1974-01-01

    Presentation of what goes on at CERN. Animation of protons going around a ring, then sent to a target and detectors look at them. SC. PS. ISR. Interesting animation: a red light is superimposed on the accelerator to indicate the beam path. (PS and ISR) BEBC. Scanning, with a nice moment of the tracks arriving. Omega. Tracks. Map showing where SPS will be. The Robbins. Other aspects of SPS construction: magnets, RF cavaties, vacuum tube.

  16. Robot adventures at CERN

    CERN Multimedia

    2015-01-01

    Imagine if the CERN robots had an end-of-year party... From retrieving data tapes to handling material safely, the robots at CERN fulfill numerous tasks. Find out more: http://cern.ch/go/VjX7 Produced by: CERN Video Productions Director: Christoph M. Madsen Copyright © 2015 CERN. Terms of use: http://copyright.web.cern.ch/

  17. CERN choir

    CERN Document Server

    2004-01-01

    Don't forget a special performance of Joseph Haydn's Creation, an oratorio in three parts, given by the CERN choir and the Annecy choir Pro Musica, this Sunday at 8.30 p.m. at the Grand Casino. Tickets (38 CHF) are available at Fnac Rive and Balexert.

  18. Conceptual design report: superconducting booster

    International Nuclear Information System (INIS)

    The Superconducting Booster project includes the construction of a new high-voltage injector and buncher for the existing tandem, a magnetic transport system, an rf linac with superconducting resonators, and a rebuncher-debuncher. The booster will fit in existing space so that a new building is not required. The layout of the accelerator is given in Fig. I-1. The University of Washington is contributing approximately $1 M to this project

  19. CERN Shuttle

    CERN Multimedia

    General Infrastructure Services Department

    2011-01-01

    As of Monday 21 February, a new schedule will come into effect for the Airport Shuttle (circuit No. 4) at the end of the afternoon: Last departure at 7:00 pm from Main Buildig, (Bldg. 500) to Airport (instead of 5:10 p.m.); Last departure from Airport to CERN, Main Buildig, (Bldg. 500), at 7:30 p.m. (instead of 5:40 p.m.). Group GS-IS

  20. Inauguration of POPS: the new power system of the PS

    CERN Multimedia

    Maximilien Brice

    2010-01-01

    Pictures 03 and 04 : The team from the Electrical Power Converters Group (TE/EPC) is joined by the Director of Accelerators, the heads of the BE, TE and FI departments, CERN managers and Converteam representatives in a group portrait in front of three of the containers that house the capacitor banks of the PS's new power supply system, POPS. Pictures 01, 06 and 07 : Magid-Michel Saikaly, energy and infrastructure director at Converteam, receives a prize from Steve Myers, Director of Accelerators at CERN, for the development and fabrication of the new electrical power system for the PS, called POPS.

  1. Spatial and temporal beam profile monitor with nanosecond resolution for CERN's Linac4 and Superconducting Proton Linac

    CERN Document Server

    Hori, M

    2008-01-01

    The Linac4, now being developed at CERN, will provide 160-MeV H- beams of high intensity . Before this beam can be injected into the CERN Proton Synchrotron Booster or future Superconducting Proton Linac for further acceleration, some sequences of 500-ps-long micro-bunches must be removed from it, using a beam chopper. These bunches, if left in the beam, would fall outside the longitudinal acceptance of the accelerators and make them radioactive. We developed a monitor to measure the time structure and spatial profile of this chopped beam, with respective resolutions and . Its large active area and dynamic range also allows investigations of beam halos. The ion beam first struck a carbon foil, and secondary electrons emerging from the foil were accelerated by a series of parallel grid electrodes. These electrons struck a phosphor screen, and the resulting image of the scintillation light was guided to a thermoelectrically cooled, charge-coupled device camera. The time resolution was attained by applying high-...

  2. CERN back to its roots

    CERN Multimedia

    2004-01-01

    History came full circle on Saturday 23 October, when CERN's 50th anniversary celebrations drew to a close with a ceremony at Geneva University's Institut de Physique. For it was here, on the banks of the River Arve, that CERN's first staff members, from the PS Magnets Group, came to work in October 1953. Since that day, there has not been a break in the collaboration between CERN and the Institut de Physique de Genève. "We cooperate very closely in the fields of experimental and theoretical particle physics, of course, but also in applied and materials physics," says Alain Blondel, Professor at Geneva University (ATLAS member and neutrino factory promoter) and organiser of the ceremony. "For instance, the Physics Section has just developed a superconducting magnet capable of reaching a continuous magnetic field of 21.3 Tesla, which is of great interest to CERN." The ceremony, interspersed with "cosmic" musical interludes, was an opportunity to recall this partnership that is more than fifty years old. A c...

  3. CERN moves to http://home.cern

    CERN Multimedia

    2015-01-01

    A new top-level domain for CERN will be inaugurated next week, with the migration of the core website to http://home.cern.   The new home.cern webpage. The .cern top-level domain is intended for the exclusive use of CERN and its affiliates, and will soon be open for applications from within the community. Clear governance mechanisms for registration and management of .cern domains have been put in place. Applications for domains may be submitted by current members of the CERN personnel, and must be sponsored by a CERN entity such as a department, experiment, project or CERN-recognised experiment. For more information please refer to the registration policy. The acquisition of the .cern top-level domain was negotiated via ICANN’s new gTLD programme by a board comprising members of the CERN Legal Service, Communications group and IT department. .cern is one of over 1,300 new top-level domains that will launch over the coming months and years. The .cern domain nam...

  4. Aerial view of CERN under the snow

    CERN Multimedia

    1963-01-01

    In this photograph taken in the winter of 1963, CERN still looks quite bare under its mantle of snow. The Proton Synchrotron (PS), resembling a bicycle wheel in shape, had been in operation since the summer of 1959. A proposal had just been made for the site of CERN's second large project, the Intersecting Storage Rings (ISR): France was to house the world's first proton-proton collider. In September 1965, the French authorities signed an agreement making more than 40 hectares of land available for the extension of the CERN site established in Switzerland into French territory. The ISR project received final approval from the CERN Council in December 1965. The civil engineering work on the French part began in November 196

  5. UK @ CERN

    CERN Multimedia

    FI Department

    2008-01-01

    17 – 18 November 2008 9.00 a.m. - 5.00 p.m. on Monday 17 November 9.00 a.m. - 5.00 p.m. on Tuesday 18 November Individual meetings will take place in the technicians’ or engineers’ offices. The companies will contact relevant users/technicians but anyone wishing to arrange an appointment with a specific company can contact Caroline Laignel (mailto:caroline.laignel@cern.ch, tel. 73722). A list of the companies is available from all departmental secretariats and on the web at: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm List of companies: 1. Caburn MDC Europe Ltd. 2. Croft Engineering Services 3. Cryox Ltd. 4. Goodfellow Cambridge Ltd. 5. Gravatom Engineering Systems Ltd. 6. High Voltage Technology 7. Lilco Ltd. 8. Micro Metalsmiths Ltd. 9. Photek Ltd. 10. Shadow Robot Company 11. Sundance Multiprocessor Technology Ltd. 12. Tessella plc 13. Thermal Resources Management Ltd. 14. Torr Scientific Ltd. For further information please contact Mrs C. Laignel, FI-DI, tel. 7372...

  6. CERN technology in the service of medicine

    CERN Multimedia

    2001-01-01

    The prototype of the first module of the LInac BOster (LIBO) has been constructed and tested at CERN. This new medical accelerator offers new perspectives in deep-seated tumour treatment.   Accelerator technology developed at CERN is set to bring about important advances in cancer therapy. The linac booster - LIBO - project aims to build a 3GHz proton linear accelerator to boost to 200 MeV the energy of the beam from 50-70 MeV cyclotrons, existing in several hospitals and laboratories. This will allow deep-seated tumours to be treated (see box). The prototype of the first LIBO module has just passed high power RF tests at CERN. Two members of the LIBO collaboration, Riccardo Zennaro and Paolo Berra, with the first LIBO module installed in the LIL tunnel. The LIBO idea goes back to 1993 when it was conceived by CERN's Ugo Amaldi, founder of Italy's TERA foundation. From the beginning, Mario Weiss, a former CERN staff member has led the project. A decisive step was taken in 1998 when a collaboration...

  7. EDH 'Millionaire' in PS Division

    CERN Multimedia

    2001-01-01

    Christmas cheer! Left to right: Gerard Lobeau receives a bottle of Champagne from Derek Mathieson and Jurgen De Jonghe in recognition of EDH's millionth document. At 14:33 on Monday 3 December a technician in PS division, Gerard Lobeau, unwittingly became part of an important event in the life of CERN's Electronic Document Handling system (EDH). While ordering some pieces of aluminum for one of the PS's 10Mhz RF cavities, he created EDH document number 1,000,000. To celebrate the event Derek Mathieson (EDH Project Leader) and Jurgen De Jonghe (Original EDH Project Leader) presented Mr Lobeau with a bottle of champagne. As with 93% of material requests, Mr Lobeau's order was delivered within 24 hours. 'I usually never win anything' said Mr Lobeau as he accepted his prize, 'I initially though there may have been a problem with EDH when the document number had so many zeros in it, and was then surprised to get a phone call from you a few minutes later.' The EDH team had been monitoring the EDH document number ...

  8. Look into the PS Main Control Room (partial view)

    CERN Multimedia

    1974-01-01

    Jean-Pierre Potier at work. The 26 GeV Synchrotron and later also its related machines (Linacs 1,2,3; PS-Booster, LEP-Injector Linacs and Electron-Positron Accumulator; Antiproton Accumulator, Antiproton Collector, Low Energy Antiproton Ring and more recently Antiproton Decelerator) were all controlled from the PS control room situated at the Meyrin site. The SPS and LEP were controlled from a separat control centre on the Prevessin site. In 2005 all controls were transferred to the Prevessin centre.

  9. Experiments at CERN in 1997

    International Nuclear Information System (INIS)

    This book summarises the current experimental programme at CERN. The experiments listed are taking place at one of the following machines: the Large Electron Positron Collider (LEP), the Super Proton Synchroton (SPS), the 28 GeV Proton Synchrotron (PS), including the Antiproton Decelerator (AD) for slow antiprotons and the ISOLDE facility for short-lived ions. The three experiments now approved for installation at the Large Hadron Collider (LHC) and the R and D projects aimed at the development of new detector technologies and data acquisition systems for the LHC experiments are also listed. (orig./WL)

  10. FNAL booster: Experiment and modeling

    Energy Technology Data Exchange (ETDEWEB)

    Panagiotis Spentzouris; James Amundson

    2003-06-02

    We present measurements of transverse and longitudinal beam phase space evolution during the first two hundred turns of the FNAL Booster cycle. We discuss the experimental technique, which allowed us to obtain turn-by-turn measurements of the beam profile. The experimental results are compared with the prediction of the Synergia 3D space charge simulation code.

  11. LS1 Report: PS beams are back!

    CERN Multimedia

    Katarina Anthony & Anaïs Schaeffer

    2014-01-01

    For the first time in over 15 months, there are beams back in the PS. Making their first tour of the accelerator today, 20 June, their injection marks the end of weeks of cold checkouts and hardware commissioning in the PS.   The CERN Control Centre (CCC) is back in business: people gather to restart the LHC injectors, today the PS. Since hardware commissioning was wrapped up on 23 May, the Operations Group (BE-OP) has been conducting cold checkouts on the PS. This involves switching on all of the machine's systems, verifying that they respond to commands by OP and ensuring they are calibrated to beam timings. "These verifications were done, in part, during the hardware commissioning dry runs," says Rende Steerenberg, PS section leader. "But the cold checkouts are on a much larger scale, as we act as if there is beam in the whole machine. We placed a full load on the controls system, cooling, networks, etc. in order to setup the accelerator in the most realis...

  12. Bienvenue au CERN !

    CERN Multimedia

    CERN Press Office. Geneva

    1998-01-01

    CERN, the Laboratory which invented the World-Wide Web has re-invented its public Web site. The new face of CERN has gone live at http://www.cern.ch/ Public . CERN's new Web pages have been designed to give visitors an informative introduction to the fascinating world of particle physics. For those whose whirl around the Web only allows a short stop, there's the 'CERN in two minutes' page.

  13. UK @ CERN

    CERN Multimedia

    FI Department

    2008-01-01

    17 – 18 November 2008 9.00 a.m. - 5.00 p.m. on Monday 17 November 9.00 a.m. - 5.00 p.m. on Tuesday 18 November Individual meetings will take place in the technicians’ or engineers’ offices. The companies will contact relevant users/technicians but anyone wishing to arrange an appointment with a specific company can contact Caroline Laignel (caroline.laignel@cern.ch, tel. 73722). A list of the companies is available from all departmental secretariats and on the web here. List of companies: 1. Caburn MDC Europe Ltd. 2. Croft Engineering Services 3. Cryox Ltd. 4. Goodfellow Cambridge Ltd. 5. Gravatom Engineering Systems Ltd. 6. High Voltage Technology 7. Lilco Ltd. 8. Micro Metalsmiths Ltd. 9. Photek Ltd. 10. Shadow Robot Company 11. Sundance Multiprocessor Technology Ltd. 12. Tessella plc 13. Thermal Resources Management Ltd. 14. Torr Scientific Ltd. For further information please contact Mrs C. Laignel, FI-DI, tel. 73722.

  14. SAFETY: STRICTER CONTROLS IN CONTROLLED AREAS IN THE PS

    CERN Document Server

    G. Daems

    2001-01-01

    The PS accelerators will soon stop for several months. Work will take place in controlled areas in the PS and will involve many people who are not always aware of the risks associated with the work sites. To guarentee the safety of these workers, the following two measures will be applied: everyone working in a controlled zone - Linacs, PSB, and PS machines tunnels, and transfer lines - must wear, visibly, his CERN access card and his film badge. the CERN access card and the film badge will only be issued after following a basic safety course. Regular checks will be carried out during the shutdown. Anyone without these two items on their person will be obliged to leave the area immediately.

  15. Supervision Software for the Integration of the Beam Interlock System with the CERN Accelerator Complex

    CERN Document Server

    Audrain, M; Dragu, M; Fuchsberger, K; Garnier, JC; Gorzawski, AA; Koza, M; Krol, K; Moscatelli, A; Puccio, B; Stamos, K; Zerlauth, M

    2014-01-01

    The Accelerator complex at the European Organisation for Nuclear Research (CERN) is composed of many systems which are required to function in a valid state to ensure safe beam operation. One key component of machine protection, the Beam Interlock System (BIS), was designed to interface critical systems around the accelerator chain, provide fast and reliable transmission of beam dump requests and trigger beam extraction in case of malfunctioning of equipment systems or beam losses. Numerous upgrades of accelerator and controls components during the Long Shutdown 1 (LS1) are followed by subsequent software updates that need to be thoroughly validated before the restart of beam operation in 2015. In parallel, the ongoing deployments of the BIS hardware in the PS booster (PSB) and the future LINAC4 give rise to new requirements for the related controls and monitoring software due to their fast cycle times. This paper describes the current status and ongoing work as well as the long-term vision for the integratio...

  16. Performance of the CERN PSB at 160 MeV with $H^{-}$ charge exchange injection

    CERN Document Server

    AUTHOR|(CDS)2084247; Santoni, Claudio

    As part of the LHC Injectors Upgrade Project, the CERN PS Booster (PSB) will be upgraded with a H- charge exchange injection system and its injection energy will be raised from 50 MeV to 160 MeV to obtain the beam brightness required for the LHC High-Luminosity Upgrade. Space charge effects like beam losses and transverse emittance blow-up at injection are expected to be the main limitations towards the achievement of the required high brightness. Studies of beam dynamics in presence of space charge in order to evaluate the performances of the PSB after the Upgrade have been performed. The first part of the work consists of measurements in the present machine, to study the effects of space charge and its interplay with resonances and to have a good set of data for code benchmarking. The code chosen for the beam tracking in presence of space charge is PTC-Orbit (and PyOrbit). Necessary numerical convergence studies are presented together with a benchmark with the PSB measurements. Once assessed the code and it...

  17. AHF Booster Tracking with SIMPSONS.

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, D. E. (David E.); Neri, F. (Filippo)

    2002-01-01

    The booster lattice for the Advanced Hydrotest Facility at Los Alamos was tracked in 3-D with the program SIMPSONS, using the full, symplectic lattice from TEAPOT, using the full set of magnet and misalignment errors, as well as full space-charge effects. The only corrections included were a rough closed-orbit correction and chromaticity correction. The lattice was tracked for an entire booster cycle, from multi-turn injection through acceleration to the top energy of 4 GeV, approximately 99,000 turns. An initial injection intensity of 4x1Ol2, injected in 25 turns, resulted in a final intensity of 3 . 2 {approx} 1 0a' {approx}t 4 GeV. Results of the tracking, including emittance growth, particle loss, and particle tune distributions are presented.

  18. Inside CERN : Grosse Maschinen fur kleinste teilchen

    CERN Multimedia

    CERN Public Information Office

    1974-01-01

    A service station with a difference. Presentation of what goes on at CERN. Animation of protons going around a ring, then sent to a target and detectors look at them. SC. PS. ISR. Interesting animation: a red light is superimposed on the accelerator to indicate the beam path. (PS and ISR) BEBC. Scanning, with a nice moment of the tracks arriving. Omega. Tracks. Map showing where SPS will be. The Robbins. Other aspects of SPS construction: magnets, RF cavaties, vacuum tube.Comments : Calm, well constructed presentation without much film imagination, aside from the red light/beam animation.

  19. The new heart of the PS is beating strongly

    CERN Multimedia

    Corinne Pralavorio

    2011-01-01

    The PS has resumed operation with a brand new electrical power system called POPS; this enormous system comprising power electronics and capacitors is crucial because if it broke down practically no particles would be able to circulate at CERN. As soon as it started, POPS passed all the tests with flying colours and is now pulsing at full power.   The new PS power system is made up of 6 containers, each with 60 tonnes of capacitors and 8 power converters. The date 11/02/11 will always be remembered with affection by the engineers in the Electrical Power Converters Group. At 11:11 in the morning (no joke), the first beams powered by the new system began to circulate in the PS. The cutely-named POPS (POwer for PS) took over from the old rotating machine that had been working since 1968. From now on it will be POPS that supplies the PS main magnets with the electrical pulses needed to accelerate the beams for the LHC and all CERN's other facilities. The system is crucial as the PS is one of the lyn...

  20. A day in the CERN Control Centre

    CERN Multimedia

    Rosaria Marraffino

    2015-01-01

    The CERN Control Centre (CCC) is the nerve centre of the CERN beam systems. From this room, the experts prepare, monitor, adjust, and control the particle beams that circulate throughout the accelerator complex while ensuring that the services and the technical infrastructure work flawlessly. Buttons, screens, telephones, lights (but no sound): in the CCC, everything is ready to make it possible for the LHC to reach the unprecedented energies expected at Run 2.   Seen from above, the CERN Control Centre resembles the shape of a quadrupole magnet. The consoles are distributed in four circles, called “islands”, dedicated to the LHC, the SPS, the PS Complex and the Technical Infrastructure (TI) respectively. Spread between TI and LHC are the Cryogenics consoles. Being in the same room allows the 24h-manned islands to be constantly in touch with one another, thus ensuring the best performance of the machines. At the LHC island, operators are currently busy training the magnet...

  1. Hangout with CERN: Welcome to CERN (S01E01)

    CERN Multimedia

    Kahle, Kate

    2012-01-01

    In this first Hangout with CERN "Welcome to CERN" ATLAS physicist Steven Goldfarb, CERN theorist Alvaro De Rujula and Mick Storr from the CERN education group introduce CERN and answer some of the questions received via #askCERN on Twitter and Google+. Recorded live on 1st November 2012.

  2. Last PS magnet refurbished

    CERN Multimedia

    2009-01-01

    PS Magnet Refurbishment Programme Completed. The 51st and final refurbished magnet was transported to the PS on Tuesday 3 February. The repair and consolidation work on the PS started back in 2003 when two magnets and a busbar connection were found to be faulty during routine high-voltage tests. The cause of the fault was a combination of age and radiation on electrical insulation. After further investigation the decision was taken to overhaul half of the PS’s 100 magnets to reduce the risk of a similar fault. As from 20 February the PS ring will start a five-week test programme to be ready for operation at the end of March.

  3. Doing business with CERN

    CERN Multimedia

    2015-01-01

    The Procurement Service, in collaboration with the Communications group’s Design team, has recently launched a new information campaign targeted at companies wishing to supply their products and services to CERN. This campaign comprises:   A brochure, available in hard and soft copy:  http://procurement.web.cern.ch/brochures/doing-business-with-cern.   A 6-minute video overview: https://procurement-dev.web.cern.ch/doing-business-with-cern. This campaign is intended for Member State firms with whom CERN is yet to do business. The key objectives are: To emphasise that CERN can be considered a major customer across a wide range of activities;   To present CERN’s procurement procedures in a dynamic and digestible way;   To highlight the information available on CERN’s procurement website: http://procurement.web.cern.ch. Furthermore, a new section called “Having a contract with CERN” is also now ava...

  4. Virgin Galactic explores CERN

    CERN Multimedia

    2016-01-01

    Virgin Galactic visited CERN with a group of future astronauts and Sir Richard Branson. During their visit the group was shown around various experiments, including the Globe, SM18, AMS and the CERN Control Centre.

  5. CERN Shop Christmas Sale

    CERN Multimedia

    Visits & Exhibition Service/ETT-VE

    2001-01-01

    11-13.12.2001 Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 11 to Thursday 13 December from 10.30 to 16.00. CERN Calendar 10.- CERN Sweat-shirts(M, L, XL) 30.- CERN T-shirt (M, L, XL) 20.- New CERN silk tie (2 colours) 35.- Fancy silk tie (blue, bordeau) 25.- Silk scarf (light blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- CERN watch 25.- CERN baseball cap 15.- CERN briefcase 15.- Book 'Antimatter' (English) 35.- Book 'How the web was born' (English) 25.- The Search for Infinity (French, Italian, English, German) 40.-   If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs.

  6. Greece at CERN

    CERN Multimedia

    CERN Press Office. Geneva

    1997-01-01

    Greece, one of CERN*'s founding Member States, inaugurated its first Industrial Exhibition at the Meyrin site on Tuesday, 14 October. After a meeting with CERN's Director General, Professor Christopher Llewellyn Smith, Professor Emmanuel Frangoulis, the General Secretary of the Greek Ministry of Industry, accompanied by Prof Emmanuel Floratos, Greek delegate to CERN council visited the DELPHI experiment on the LEP collider, guided by Andromachi Tsirou, a Greek physicist.

  7. France at CERN

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    Rolf Heuer, CERN Director General, visits the exhibition "La France au CERN". The exhibition France at CERN, organized by UBIFRANCE in collaboration with CERN's GS/SEM (Site Engineering and Management) service, took place from Monday 7 to Wednesday 9 June in the Main Building. The 36 French firms taking part came to present their products and technologies related to the Organization's activities. The next exhibition will be "Netherlands at CERN" in November.

  8. The CERN Library

    CERN Multimedia

    Hester, Alec G

    1968-01-01

    Any advanced research centre needs a good Library. It can be regarded as a piece of equipment as vital as any machine. At the present time, the CERN Library is undergoing a number of modifications to adjust it to the changing scale of CERN's activities and to the ever increasing flood of information. This article, by A.G. Hester, former Editor of CERN COURIER who now works in the Scientific Information Service, describes the purposes, methods and future of the CERN Library.

  9. GRYPHON: Air launched space booster

    Science.gov (United States)

    1993-06-01

    The project chosen for the winter semester Aero 483 class was the design of a next generation Air Launched Space Booster. Based on Orbital Sciences Corporation's Pegasus concept, the goal of Aero 483 was to design a 500,000 pound air launched space booster capable of delivering 17,000 pounds of payload to Low Earth Orbit and 8,000 pounds of payload to Geosynchronous Earth Orbit. The resulting launch vehicle was named the Gryphon. The class of forty senior aerospace engineering students was broken down into eight interdependent groups. Each group was assigned a subsystem or responsibility which then became their field of specialization. Spacecraft Integration was responsible for ensuring compatibility between subsystems. This group kept up to date on subsystem redesigns and informed those parties affected by the changes, monitored the vehicle's overall weight and dimensions, and calculated the mass properties of the booster. This group also performed the cost/profitability analysis of the Gryphon and obtained cost data for competing launch systems. The Mission Analysis Group was assigned the task of determining proper orbits, calculating the vehicle's flight trajectory for those orbits, and determining the aerodynamic characteristics of the vehicle. The Propulsion Group chose the engines that were best suited to the mission. This group also set the staging configurations for those engines and designed the tanks and fuel feed system. The commercial satellite market, dimensions and weights of typical satellites, and method of deploying satellites was determined by the Payloads Group. In addition, Payloads identified possible resupply packages for Space Station Freedom and identified those packages that were compatible with the Gryphon. The guidance, navigation, and control subsystems were designed by the Mission Control Group. This group identified required tracking hardware, communications hardware telemetry systems, and ground sites for the location of the Gryphon

  10. Booster double harmonic setup notes

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, C. J. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.

    2015-02-17

    The motivation behind implementing a booster double harmonic include the reduced transverse space charge force from a reduced peak beam current and reduced momentum spread of the beam, both of which can be achieved from flattening the RF bucket. RF capture and acceleration of polarized protons (PP) is first set up in the single harmonic mode with RF harmonic h=1. Once capture and acceleration have been set up in the single harmonic mode, the second harmonic system is brought on and programmed to operate in concert with the single harmonic system.

  11. In the CERN Library

    CERN Multimedia

    1963-01-01

    Seen in this picture is Noria Christophoridou, librarian of the Greek Atomic Energy Commission, who has been sent by her government to CERN for a year to widen her experience of library and documentation services. In the photograph she is providing information to Kurt Gottfried, a CERN visiting scientist from Harvard University, who is spending a year with CERN's Theory Division

  12. 2005 CERN Relay Race

    CERN Document Server

    Patrice Loiez

    2005-01-01

    The CERN Relay Race takes place each year in May and sees participants from all areas of the CERN staff. The winners in 2005 were The Shabbys with Los Latinos Volantes in second and Charmilles Technologies a close third. To add a touch of colour and levity, the CERN Jazz Club provided music at the finishing line.

  13. CERN Photowalk 2015

    CERN Multimedia

    2015-01-01

    CERN is organising a Photowalk on Friday 25 September 2015. At this event a few selected photographers will get the chance to come to CERN, the European Organization for Nuclear Research, for an exclusive behind-the-scenes tour of the laboratory. For more information: http://photowalk2015.web.cern.ch/

  14. CERN visit for a Norwegian Prize-winner

    CERN Multimedia

    2002-01-01

    One of the prize-winners of the Contest «Life in the Universe», the final of which was held at CERN during the Science and Technology Week in November 2001 (See Bulletin n°47/2002), came to CERN to receive his prize last June. The 15-year old Norwegian Ivar Marthinusen won a two-day visit to the Laboratory. He poses on the picture surrounded by his CERN's guardian angels: from left to right, Frank Tecker and Georges-Henry Hemelsoet from PS, Tommy Eriksson from AD, Sandrine Sanchez from the Visits Service, Ivar Mathinusen with his parents, Egil Lillestol (CERN/EP), Jens Vigen from the Library, Régine Chareyron from the Visits Service, Richard Jacobsson (CERN/EP) and Sophie Baillard from the Visits Service.

  15. Collide@CERN Geneva

    CERN Document Server

    CERN. Geneva; Kieffer, Robert; Blas Temino, Diego; Bertolucci, Sergio; Mr. Decelière, Rudy; Mr. Hänni, Vincent

    2014-01-01

    CERN, the Republic and Canton of Geneva, and the City of Geneva are delighted to invite you to “Collide@CERN Geneva Music”. Come to the public lecture about collisions between music and particle physics by the third winners of Collide@CERN Geneva, Vincent Hänni & Rudy Decelière, and their scientific inspiration partners, Diego Blas and Robert Kieffer. The event marks the beginning of their residency at CERN, and will be held at the CERN Globe of Science and Innovation on 16 October 2014 at 19.00. Doors will open at 18.30.

  16. CERN Photo club

    CERN Multimedia

    CERN Photo club

    2016-01-01

    The CERN Photo Club organizes in collaboration with Canon Switzerland a photo contest open to all members of the CERN (Persons with a CERN access card). The only restriction is that the photos must have been taken with a CANON camera (DSLR, bridge or compact) between 1 and 31 October 2016. Send your three best pictures at  Photo.Contest@cern.ch with a short description explaining the images. Further information on the Photo club website: http://photoclub.web.cern.ch/content/photo-contest-october-2016

  17. Britain at CERN

    CERN Multimedia

    CERN Press Office. Geneva

    1996-01-01

    On 8 October, H.E. Mr David Beattie, British Ambassador to Switzerland, Mr John R. Nichols, H.M. Consul-General in Geneva and, Prof. Christopher Llewellyn Smith, CERN*'s Director General, formally opened the industrial exhibition of thirty-three British hi-tech companies at CERN, which takes place from 8 to 11 October, 1996. The exhibition offers British companies the opportunity to display their products in fields that are of immediate importance to the scientists, engineers and technicians working at CERN, and also to scientists from non-Member States who take part in research projects at CERN.

  18. CERN Cricket Club

    CERN Multimedia

    CERN Cricket Club

    2010-01-01

    CERN Cricket Club Match Reports The cricket season is well under way, despite the weather, and several matches have been played. The match reporters have, however, found it too difficult to limit their reports to ¼ of a page, hence the reports have not appeared in the bulletin. All reports can be found at http://cern.ch/Club-Cricket/reports/reports.html The list of forthcoming matches can be consulted at http://cern.ch/Club-Cricket/fixtures.html Further information about the CERN Cricket Club can be found at http://cern.ch/Club-Cricket/

  19. CERN honours Georges Charpak

    CERN Multimedia

    2009-01-01

    CERN pays tribute to the work of Georges Charpak at a colloquium in honour of his 85th birthday. var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-0753-kbps-480x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-Multirate-200-to-753-kbps-480x360.wmv', 'false', 480, 360, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-posterframe-480x360-at-10-percent.jpg', '1167500', true, 'Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4'); Watch the video conference of Georges Charpak.   On 9 March CERN’s Main Auditorium was the venue for a fascinating and moving celebration marking the 85th birthday of Georges Charpak, who was awarded the Nobel Prize for Physics in 1992 for his inven...

  20. CERN Holiday Gift Guide

    CERN Multimedia

    2013-01-01

    Do you have last-minute gifts to get? Stuck for ideas? The CERN Shop and the ATLAS and CMS secretariats have some wonderfully unique gifts and stocking-fillers for sale this year - perfect for the physics fanatics in your life. Let's take a look...   1. CERN Notebook, 10 CHF - 2. CERN Pop-up book, 30 CHF - 3. USB Stick 8GB, 25 CHF - 4. CERN Tumbler, 12 CHF 5. ATLAS 3D Viewer, 5 CHF - 6. ATLAS Puzzle, 15 CHF - 7. CMS Umbrella, 25 CHF   These gifts are all available at the CERN Shop, with the exception of the ATLAS 3D Viewer and the CMS umbrella, which are only available from the respective secretariats. Don’t forget! If you’re from CERN, you still have time to take advantage of a 10% off discount at the CERN shop. Offer ends 20 December.

  1. Immune responses of elk to initial and booster vaccinations with Brucella abortus strain RB51 or 19.

    Science.gov (United States)

    Olsen, S C; Fach, S J; Palmer, M V; Sacco, R E; Stoffregen, W C; Waters, W R

    2006-10-01

    Previous studies have suggested that currently available brucellosis vaccines induce poor or no protection in elk (Cervus elaphus nelsoni). In this study, we characterized the immunologic responses of elk after initial or booster vaccination with Brucella abortus strains RB51 (SRB51) and 19 (S19). Elk were vaccinated with saline or 10(10) CFU of SRB51 or S19 (n=seven animals/treatment) and booster vaccinated with a similar dosage of the autologous vaccine at 65 weeks. Compared to nonvaccinates, elk vaccinated with SRB51 or S19 had greater (PS19 after initial vaccination and after booster vaccination. Compared to nonvaccinated elk, greater (PS19 (22 weeks) treatment groups. In general, proliferative responses of vaccinates to nonautologous antigens did not differ (P>0.05) from the responses of nonvaccinated elk. Gamma interferon production in response to autologous or nonautologous Brucella antigens did not differ (P>0.05) between controls and vaccinates after booster vaccination. Flow cytometric techniques suggested that proliferation occurred more frequently in immunoglobulin M-positive cells, with differences between vaccination and control treatments in CD4+ and CD8+ subset proliferation detected only at 22 weeks after initial vaccination. After booster vaccination, one technique ([3H]thymidine incorporation) suggested that proliferative responses to SRB51 antigen, but not S19 antigen, were greater (PBrucella antigens in S19 or SRB51 vaccinates after booster vaccination. Although some cellular immune responses were detected after initial or booster vaccination of elk with SRB51 or S19, our data suggest that responses tend to be transient and much less robust than previously reported in SRB51-vaccinated cattle (Bos taurus) or bison (Bison bison). These data may explain why the vaccination of elk with S19 and SRB51 induces poor protection against brucellosis. PMID:17028213

  2. The ps in therapeutics.

    Science.gov (United States)

    Newton, David W

    2012-01-01

    The decline of ps (pharmaceutical sciences) content and emphasis, especially pharmaceutics in pharmacy education, has been followed by pharmacy practice journals since the final BS to PharmD degree transition of 1990-2000. The particular deficit of drug compatibility, compounding, packaging, reactivity, solubility, stability and storage instruction, and information was a major impetus for the 1996 premier of the International journal of pharmaceutical compounding and the 2011 introduction of the Science and technology for the hospital pharmacist electronic newsletter. The four ps examples provided in this article to corroborate the introduction to Vol. 1, No. 2 of the Science and technology for the hospital pharmacist, which featured Dr. Richard Penna's prudent reflection that biological, chemical, and physical ps facts and knowledge are vital to patient care.

  3. CERN Table Tennis Club

    CERN Multimedia

    CERN Table Tennis Club

    2014-01-01

    CERN Table Tennis Club Announcing CERN 60th Anniversary Table Tennis Tournament to take place at CERN, from July 1 to July 15, 2014   The CERN Table Tennis Club, reborn in 2008, is encouraging people at CERN to take more regular exercise. This is why the Club, thanks to the strong support of the CERN Staff Association, installed last season a first outdoor table on the terrace of restaurant # 1, and will install another one this season on the terrace of Restaurant # 2. Table tennis provides both physical exercise and friendly social interactions. The CERN Table Tennis club is happy to use the unique opportunity of the 60th CERN anniversary to promote table tennis at CERN, as it is a game that everybody can easily play, regardless of level. Table tennis is particularly well suited for CERN, as many great physicists play table tennis, as you might already know: “Heisenberg could not even bear to lose a game of table tennis”; “Otto Frisch played a lot of table tennis;...

  4. The AGS Booster vacuum systems

    International Nuclear Information System (INIS)

    The AGS Booster is a synchrotron for the acceleration of both protons and heavy ions. The design pressure of low 10-11 mbar is required to minimize beam loss of the partially stripped heavy ions. To remove contaminants and to reduce outgassing, the vacuum chambers and the components located in them will be chemically cleaned, vacuum fired, baked then treated with nitric oxide. The vacuum sector will be insitu baked to a minimum of 200 degree C and pumped by the combination of sputter ion pumps and titanium sublimation pumps. This paper describes the design and the processing of this ultra high vacuum system, and the performance of some half-cell vacuum chambers. 9 refs., 7 figs

  5. Tetanus Booster -A missed opportunity

    Directory of Open Access Journals (Sweden)

    Rajesh Gupta

    2014-06-01

    Full Text Available Tetanus a known childhood killer is an entirely preventable disease with tetanus toxoid (TT. Most of the research today is on neonatal tetanus owing to its high case fatality rate. Though the reported mortality with tetanus is lower in older age groups, the management of tetanus is still a challenge in resource constraint settings of developing countries like India. On this background the present study was designed to know the status of tetanus immunization among school going age group children. This was an OPD based survey targeting school going children (age of 5 to 18 years attending Pediatric out-patient department (OPD of a tertiary care teaching hospital. It was observed that out of 636, 299 (47% children were vaccinated for diphtheria, pertusis and tetanus (DPT booster at 5 years of age. Out of 374 children eligible for TT (10 to 16 years only 37 (9.8 % were immunized with TT at age 10 years. Out of 44 children at age of 16 years only 6 (13.6% were immunized. Though there are strategies to immunize school going children under routine immunization programme, official records documented that the immunization coverage for TT was 68% in school going age group. Majority of (80% the cases of tetanus were in non-neonatal age group (mainly school going group in Madhya Pradesh, India. Based on these observations it can be concluded that the tetanus immunization coverage among children of school going age was poor in the given setting.  Tetanus is an acute, spastic paralytic illness historically called lockjaw that is caused by the neurotoxin produced by Clostridium tetani. Tetanus occurs worldwide and is endemic in approximately 90 developing countries. Tetanus is an entirely preventable disease with active immunization with tetanus toxoid. A serum antibody titer of ≥0.01 U/mL is considered protective. [1] In India, according to National immunization schedule, active immunization against tetanus is done with administration of tetanus toxoid as

  6. PS Control Room

    CERN Multimedia

    1963-01-01

    The good old PS Control Room, all manual. For each parameter, a knob or a button to control it; for each, a light or meter or oscilloscope to monitor it; carefully written pages serve as the data bank; phones and intercom for communication. D.Dekkers is at the microphone, M.Valvini sits in front.

  7. PS auxiliary magnet

    CERN Multimedia

    1974-01-01

    Units of the PS auxiliary magnet system. The picture shows how the new dipoles, used for vertical and horizontal high-energy beam manipulation, are split for installation and removal so that it is not necessary to break the accelerator vacuum. On the right, adjacent to the sector valve and the windings of the main magnet, is an octupole of the set.

  8. Young Artists@ CERN

    CERN Document Server

    2004-01-01

    In view of 50th anniversary of CERN, about 20 young artists will be visiting CERN from 26 to 31 January to learn about the laboratory's research and the mysterious world of particle physics. The impressions they take home will be the main inspiration for the artwork they will then produce for an exhibition to be inaugurated in October 2004 as part of CERN's 50th anniversary celebration. We are looking for scientists who are interested in the Art-Science synergy and who can volunteer to discuss their work at CERN to these young artists during this week (25-31/01). Please contact renilde.vanden.broeck@cern.ch if you are interested. The project is called Young Artists@ CERN and for more information look at this website: http://www.hep.ucl.ac.uk/~andy/CERNart/

  9. CERN and the environment

    CERN Multimedia

    Corinne Pralavorio

    2016-01-01

    New webpages answer common questions about CERN and the environment.   One of the new public webpages dedicated to CERN and the environment. Do your neighbours ever ask you about CERN’s environmental impact? And about radiation in particular? If so, the answers to those questions can now be found online on a new set of public webpages dedicated to CERN and the environment. These pages, put together by the Occupational Health, Safety and Environmental Protection (HSE) unit and the groups responsible for CERN's site maintenance, contain a wealth of information on topics linked to the environment, such as biodiversity at CERN, waste management, ionising radiation, and water and electricity consumption. “CERN forms part of the local landscape, with its numerous sites and scientific activities. It’s understandable that people living nearby have questions about the impact of these activities and it’s important that we respond with complete transp...

  10. German visits to CERN

    CERN Multimedia

    2007-01-01

    State secretary to Germany's Federal Ministry of Education and Research, Frieder Meyer-Krahmer, with CERN's Director-General Robert Aymar.On 21 February, Professor Frieder Meyer-Krahmer, State Secretary to Germany's Federal Ministry of Education and Research, came to CERN. He visited the ALICE and ATLAS experiments and the computing centre before meeting the CERN's Director-General, some German physicists and members of the top management. The Minister of Science, Research and the Arts of the Baden-Württemberg regional government, Peter Frankenberg, and CERN's Director-General, Robert Aymar, signing an agreement on education. In the background: Sigurd Lettow, CERN's Director of Finance and Human Resources, and Karl-Heinz Meisel, Rector of the Fachhochschule Karlsruhe. The Minister of Science, Research and the Arts of the Baden-Württemberg regional government, Prof. Peter Frankenberg, visited CERN on 23 February. He was accompanied by the Rector of the Fachhochschule Karlsruhe, Prof. Karl-Heinz Meisel, and b...

  11. Germany at CERN

    CERN Multimedia

    2005-01-01

    From left to right: Maximilian Metzger, CERN's Secretary-General, Hermann Schunck, Director at the German Federal Ministry of Education and Research, and Robert Aymar, CERN's Director-General, talking to Wolfgang Holler from Butting, one of the companies at the "Germany at CERN" exhibition. Far right : Susanne-Corinna Langer-Greipl from BMBF, delegate to the CERN Finance Committee. For three days, CERN's Main Building was transformed into a showcase for German industry. Twenty-nine companies from sectors related to particle physics (electrical engineering, vacuum and low temperature technology, radiation protection, etc.) were here for the ninth "Germany at CERN" exhibition, organised by the German Federal Ministry of Education and Research (BMBF), which gave them the opportunity to meet scientists and administrators from the Laboratory. On 1 March the exhibition was visited by a German delegation headed by Dr Hermann Schunck, Director at BMBF.

  12. CERN Cricket club

    CERN Multimedia

    CERN Cricket club

    2015-01-01

    The CERN Cricket Club 2015 season begins soon, the first net practice is scheduled (weather permitting) for Thursday April 16th, at 18:00! The club is always looking for new players and newcomers will be made very welcome. Anyone who is interested in joining the club should sign up on our web site: http://cern.ch/Club-Cricket/ or turn up for net practice, which takes place each Thursday evening from April 16th (apart from CERN official holidays) until the end of September (starting at 18:00 to around 19:30) at the CERN Prévessin site: http://club-cricket.web.cern.ch/Club-Cricket/CERN-Ground.html The first match will be at home on Sunday, April 19th against Rhone CC from Lyon.

  13. CERN - better than science fiction!

    CERN Multimedia

    2007-01-01

    From left to right: Allan Cameron (Production Designer), Sam Breckham (Location Manager), James Gillies (Head of Communication at CERN), Jacques Fichet (from the CERN audiovisual service), Rolf Landua (former spokesman of the ATHENA antihydrogen experiment at CERN and Head of CERN's Education Group), Ron Howard, and Renilde Vanden Broeck (CERN press officer).

  14. The CERN PC farm

    CERN Multimedia

    Serge Bellegarde

    2005-01-01

    Housed in the CERN Computer Centre, these banks of computers process and store data produced on the CERN systems. When the LHC starts operation in 2008, it will produce enough data every year to fill a stack of CDs 20 km tall. To handle this huge amount of data, CERN has also developed the Grid, allowing the processing power to be shared between computer centres around the world.

  15. CERN Relay Race

    CERN Document Server

    CERN Running Club

    2010-01-01

    The CERN relay race will take place around the Meyrin site on Thursday 20 May, starting at 12.15. If possible, please avoid driving on the site during this 20-minute period. If you do meet runners while driving your car, please STOP until they have all passed. Thank you for your cooperation. Details on the route, and how to register your team for the relay race, can be found at: https://espace.cern.ch/Running-Club/CERN-Relay

  16. Radiation protection at CERN

    OpenAIRE

    Forkel-Wirth, Doris; Roesler, Stefan; Silari, Marco; Streit-Bianchi, Marilena; Theis, Christian; Vincke, Heinz; Vincke, Helmut

    2013-01-01

    This paper gives a brief overview of the general principles of radiation protection legislation; explains radiological quantities and units, including some basic facts about radioactivity and the biological effects of radiation; and gives an overview of the classification of radiological areas at CERN, radiation fields at high-energy accelerators, and the radiation monitoring system used at CERN. A short section addresses the ALARA approach used at CERN.

  17. Academic Training Lecture Regular Programme: Physics at the AD/PS/SPS

    CERN Multimedia

    2012-01-01

    Physics at the AD/PS/SPS (1/4), by Lau Gatignon (CERN).   Monday, June 18, 2012 from 11:00 to 12:00 (Europe/Zurich) at CERN ( 222-R-001 - Filtration Plant )   Lecture 1: The CERN injector complex and beams for non-LHC physics. The various machines and beam lines in the CERN injector complex are presented, from the linacs to the SPS. Special emphasis is given to the beam lines at the PS and SPS machines: AD, North and East Areas, nTOF and CNGS and HiRadMad as well as the ion beams. A short outlook is given to possible future upgrades and projects.   More information here.  

  18. Britain at CERN

    CERN Multimedia

    2000-01-01

    H. E. Mr Christopher Hulse, Ambassador of United Kingdom in Switzerland, CERN Director General Luciano Maiani, Sir David Wright, Chief Executive of British Trade International and Roger Cashmore, CERN Director of research visit the Britain at CERN exhibition. From 14 to 17 November 30 British companies exhibited leading edge technologies at CERN. This is Britain's 18th exhibition at CERN since 1968. Out of the 30 companies, which attended the Britain at CERN exhibition in 1998, 25 have received an order or a contract relating to CERN during the last two years. The exhibition was inaugurated on Tuesday by Sir David Wright, Chief Executive of British Trade International. He was accompanied by H.E. Mr Christopher Hulse CMG, OBE, Her Majesty's Ambassador to Switzerland, and Mr. David Roberts, Deputy Head of Mission and Director of Trade Promotion at the British Embassy in Bern. CERN Director-General, Professor Luciano Maiani, underlined the major contribution of British physicists to CERN, pointing out the fact ...

  19. Integrity at CERN

    CERN Document Server

    Department, HR

    2015-01-01

    In the fulfillment of its mission, CERN relies upon the trust and material support of its Member States and partners, and is committed to exercising exemplary stewardship of the resources with which it is entrusted. Accordingly, CERN expects the highest level of integrity from all its contributors (whether members of the personnel, consultants, contractors working on site, or persons engaged in any other capacity at or on behalf of CERN). Integrity is a core value of CERN, defined in the Code of Conduct as “behaving ethically, with intellectual honesty and being accountable for one’s own actions”.

  20. Transfer line from the PSB to the PS (recombination)

    CERN Multimedia

    1976-01-01

    After sequential ejection of 5 bunches from each of the 4 rings of the Booster (originally 800 MeV, now 1.4 GeV), the 4 batches are brought to the same vertical level, so as to form a string of 20 bunches, filling the circumference of the PS. This vertical "recombination" is performed in the transfer line, using vertical bending magnets, septa and kickers. Here we see the section where the beam from ring 4 (the top one) is brought down to the level of ring 3, and the beam from ring 1 up to the level of ring 2. Further downstream (to the right, outside this picture), level 2 is brought up to level 3, identical to that of the PS. After this original recombination scheme, other ways of combining the 4 beams, vertically and/or longitudinally, were developed and used in operation.

  1. Gas Test Loop Booster Fuel Hydraulic Testing

    Energy Technology Data Exchange (ETDEWEB)

    Gas Test Loop Hydraulic Testing Staff

    2006-09-01

    The Gas Test Loop (GTL) project is for the design of an adaptation to the Advanced Test Reactor (ATR) to create a fast-flux test space where fuels and materials for advanced reactor concepts can undergo irradiation testing. Incident to that design, it was found necessary to make use of special booster fuel to enhance the neutron flux in the reactor lobe in which the Gas Test Loop will be installed. Because the booster fuel is of a different composition and configuration from standard ATR fuel, it is necessary to qualify the booster fuel for use in the ATR. Part of that qualification is the determination that required thermal hydraulic criteria will be met under routine operation and under selected accident scenarios. The Hydraulic Testing task in the GTL project facilitates that determination by measuring flow coefficients (pressure drops) over various regions of the booster fuel over a range of primary coolant flow rates. A high-fidelity model of the NW lobe of the ATR with associated flow baffle, in-pile-tube, and below-core flow channels was designed, constructed and located in the Idaho State University Thermal Fluids Laboratory. A circulation loop was designed and constructed by the university to provide reactor-relevant water flow rates to the test system. Models of the four booster fuel elements required for GTL operation were fabricated from aluminum (no uranium or means of heating) and placed in the flow channel. One of these was instrumented with Pitot tubes to measure flow velocities in the channels between the three booster fuel plates and between the innermost and outermost plates and the side walls of the flow annulus. Flow coefficients in the range of 4 to 6.5 were determined from the measurements made for the upper and middle parts of the booster fuel elements. The flow coefficient for the lower end of the booster fuel and the sub-core flow channel was lower at 2.3.

  2. Booster 6-GeV study

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Xi; Ankenbrandt, Charles M.; Pellico, William A.; Lackey, James; Padilla, Rene; /Fermilab; Norem, J.; /Argonne

    2004-12-01

    Since a wider aperture has been obtained along the Booster beam line, this opens the opportunity for Booster running a higher intensity beam than ever before. Sooner or later, the available RF accelerating voltage will become a new limit for the beam intensity. Either by increasing the RFSUM or by reducing the accelerating rate can achieve the similar goal. The motivation for the 6-GeV study is to gain the relative accelerating voltage via a slower acceleration.

  3. PS ejection septum magnet.

    CERN Multimedia

    1993-01-01

    For the acceleration of lead ions in the PS, the residual gas pressure had to be lowered. Many components, amongst these the septum magnets, had to be replaced by new ones with a lower outgassing rate. This is the new ejection, installed at the beginning of 1994, to direct protons and lead ions into the transfer line to the SPS as part of the LHC pre-acceleration chain.

  4. The PS Upgrade Program: Recent Advances

    CERN Document Server

    Gilardoni, SS; Bertone, C; Biancacci, N; Blas, A; Damjanovic, S; Bodart, D; Borburgh, J; Chiggiato, P; Damerau, H; Devine, JD; Dobers, T; Gourber-Pace, M; Hancock, S; Huschauer, A; Iadarola, G; Lopez Hernandez, LA; Masi, A; Mataguez, S; M´etral, E; Paoluzzi, M; Persichelli, S; Pittet, S; Rossi, C; Roesler, S; Rumolo, G; Salvant, B; Steerenberg, R; Sterbini, G; Vollaire, J; Wasef, R; Ventura, L; Yin Vallgren, C; Migliorati, M

    2013-01-01

    The LHC Injectors Upgrade project (LIU) has been initiated to improve the performances of the existing injector complex at CERN to match the future requirements of the HL-LHC (High Luminosity LHC). In this framework, the Proton Synchrotron (PS) will undergo fundamental changes for many of its main systems: the injection energy will be increased to reduce space-charge effects, the transverse damper will be improved to cope with transverse instabilities, and the RF systems will be upgraded to accelerate higher beam intensity and brightness. These hardware improvements are triggered by a series of studies meant to identify the most critical performance bottlenecks, like space charge, impedances, longitudinal and transverse instabilities, as well as electron-cloud. Additionally, alternative production schemes for the LHC-type beams have been proposed and implemented to circumvent some of the present limitations. A summary of the most recent advances of the studies, as well as the proposed hardware improvements is...

  5. Punctualizaciones del CERN

    CERN Document Server

    2002-01-01

    "Viene de la pagina anterior. Puntualizaciones del CERN. La valoracion que me merece la aprobacion en el Consejo de Ministros el 24 de mayo de un acuerdo de colaboracion entre el MCYT y el CERN para el proyecto de neutrinos al Gran Sasso es positiva" (1 page).

  6. Integration of CERN staff

    CERN Document Server

    1965-01-01

    An example of the integration of CERN staff in the neighbouring communes is provided by the hamlet of Bugnon at St-Genis-Pouilly (Ain), FRance. The CERN installation on the Swiss site are visible on the left in the background. Behind them the Saleve mountain in Haute-Savoie.

  7. UK Mission to CERN

    CERN Multimedia

    2004-01-01

    At the end of June, nine experts from UK industry visited CERN to study techniques for developing distributed computing systems and to look at some specific applications. In a packed three-day programme, almost 40 CERN experts presented a comprehensive survey of achievements.

  8. CERN's Early History Revisited

    CERN Multimedia

    Schopper, Herwig Franz; Krige, Gerhard John

    2005-01-01

    As a member of the group of historians charged to write the history of the founding of CERN, John Krige particularly underlines the important role I.I. Rabi played. The first author, former Director General of CERN add a few comments. S.A. Khan gives precisions about the role played by E. Amaldi and P. Auger; then J. Krige replies

  9. Romanian Visit to CERN

    CERN Multimedia

    2001-01-01

    Romanian Minister for Foreign Affairs, Mr Mircea Dan Geoana, visited CERN on 30 March to discuss collaboration between his country and the Laboratory. Above, Mr Dan Geoana signs the visitors' book in the presence of CERN Director General Luciano Maiani and Mrs Anda Flip, Ambassador and permanent representative of Romania at the United Nations.

  10. CERN openlab Open Day

    CERN Multimedia

    Purcell, Andrew Robert

    2015-01-01

    The CERN openlab Open Day took place on 10 June, 2015. This was the first in a series of annual events at which research and industrial teams from CERN openlab can present their projects, share achievements, and collect feedback from their user communities.

  11. The CERN Accelerator School

    CERN Multimedia

    2016-01-01

    Introduction to accelerator physics This course will take place in Budapest, Hungary, from 2 to 14 October 2016. It is now open for registration and further information can be found at: http://cas.web.cern.ch/cas/Hungary2016/Hungary-advert.html and http://indico.cern.ch/event/532397/.

  12. Child Care at CERN

    CERN Document Server

    CERN, Child Care Initiative

    2008-01-01

    This is a document summarizing a survey of child care needs of CERN staff and users which was performed in February 2008 by the CERN Child Care Initiative. The document presents the analysis of this data. Conclusions on the minimal facilities size are derived and possible funding source at the European Union are discussed.

  13. ESO: The CERN Years

    CERN Multimedia

    Schaeffer, A

    2012-01-01

    In 1970, CERN and ESO signed a collaboration agreement for the construction of the Observatory’s first telescope. That same year, ESO’s Telescope Division and Sky Atlas laboratory settled on the CERN site in Meyrin. Let’s turn back to the beginnings of this lasting and fruitful alliance.

  14. Conceptual Design of Superferric Magnets for PS2

    CERN Document Server

    Bottura, L; Kirby, G; MacCaferri, R; Maglioni, C; Parma, V; de Rijk, G; Richter, D; Rossi, L; Scandale, Walter; Serio, L; Tommasini, D

    2008-01-01

    We analyze feasibility and cost of a superferric magnet design for the PS2, the 50 GeV ring that should replace the PS in the CERN injector chain. Specifically, we provide the conceptual design of dipole and quadrupoles, including considerations on cryogenics and powering. The magnets have warm iron yoke, and cryostated superconducting coils embedded in the magnet, which reduces AC loss at cryogenic temperature. The superconductor has large operating margin to endure beam loss and operating loads over a long period of time. Although conservative, and without any critical dependence on novel technology developments, this superconducting option appears to be attractive as a low-power alternative to the normal-conducting magnets that are the present baseline for the PS2 design. In addition it provides flexibility in the selection of flat-top duration at no additional cost.

  15. The PS will soon be back in operation

    CERN Multimedia

    2006-01-01

    The PS's power supply system is undergoing repairs for the accelerator to restart on 26 June. The AB Department's Power Converter Group is working flat out with Siemens to return the PS's power supply system to working order. A problem appeared on the insulation of the power cables of the rotor of the rotating machine (photo) which supplies power to the PS magnets. To prevent more significant damage to the rotating machine, the AB Department, with the approval of the CERN Management, decided to shut down the PS which had started running on 15 May. Everything is being done to restart the accelerator on 26 June. The PS's rotating machine comprises a motor coupled to a generator. The generator's rotor acts like a flywheel, supplying high-power pulses of 40 to 50 megawatts to the PS magnets. The 6 megawatt motor drives the installation at 1000 revolutions per minute and compensates only for variations in speed. It is an essential interface since it would be hard to imagine connecting such an electrical charge, p...

  16. Qualitative analysis of low-lying resonances of the dipositronium emerging from Ps-Ps and Ps-Ps* collisions

    CERN Document Server

    Bao, C G

    1999-01-01

    An analysis of the channel wave functions is made to clarify the types of resonance emerging from Ps-Ps and Ps-Ps* collisions. The ordering of the energy levels of the states of the dipositronium is evaluated based on the inherent nodal structures of wave functions and on existing theoretical results. A few very probable low-lying narrower resonances, namely the 0+(A2), 1-(E),..., benefiting from the centrifugal barrier have been proposed.

  17. Lectures for CERN pensioners

    CERN Multimedia

    GS Department

    2009-01-01

    The CERN Medical Service and the Pensioners Association are pleased to invite CERN pensioners to a series of lectures given by professors and specialists from the Teaching Hospitals and the Faculty of Medicine of the University of Geneva on the following topic: PROMOTION OF OPTIMUM BRAIN AGEING The lectures will take place in the Main CERN Auditorium (Building 60) from 2.30 p.m. to 4.30 p.m. on the following dates: Thursday 15 January 2009: Diagnosing and treating Alzheimer’s disease Pr Gabriel GOLD Wednesday 25 February 2009: What is the brain reserve? Speaker’s name to be announced at a later date. The lectures will be given in French, with transparencies in English, and will be followed by a wide-ranging debate with the participants. CERN Medical Service - Pensioners Association - CERN-ESO (GAC-EPA)

  18. Romanian President Visits CERN

    CERN Multimedia

    2001-01-01

    Director General Luciano Maiani watches as Romanian President Ion Iliescu signs the CERN guest book. On Friday the 12th of October, Romanian President Ion Iliescu arrived at CERN and was warmly greeted by Director General Luciano Maiani at the steps of building 500. After initial greetings and a general presentation of the laboratory, President Iliescu and his entourage embarked on a whistle stop tour of the CERN facilities. They visited the CMS magnet assembly hall and civil engineering work where presentations were made by CMS spokesperson Michel Della Negra and the ATLAS Tile Calorimeter where the president was introduced to Romanian physicists working here at CERN. Michel Della Negra explains some of the general principles behind CMS to President Iliescu during his visit last week. The Romanian teams working on CERN projects make very visible contributions, for example to the construction of the ATLAS experiment and to the preparation of its eventual scientific exploitation. 'Those of us on the ATLAS ...

  19. CERN in the park

    CERN Multimedia

    2002-01-01

    CERN will be the centre of debate at a 'Café scientifique' on Monday 29 April. The aim of the Cafés scientifiques, which are organised by the association of Bancs Publics, is to kindle discussion between ordinary people and specialists in a scientific field. This Monday, Maurice Bourquin, President of the CERN Council, Hans Hoffmann, Director of Technology Transfer and Scientific Computing at CERN, Gilbert Guignard, a physicist at CERN, and Ruhal Floris, who teaches mathematical didactics at the University of Geneva, will explain the usefulness and contributions to science of the world's biggest laboratory for particle physics. What is CERN for? Monday 29 April at 18.30 Musée d'histoire des sciences, Geneva (in the park Perle du Lac) Entry free Wine and buffet after the discussion

  20. France at CERN

    CERN Multimedia

    2001-01-01

    From 19 to 22 June, for the 8th edition of France at CERN, 31 French companies presented their latest technology to the Laboratory. Demonstrating the latest in French technology during France at CERN. The France at CERN exhibition was inaugurated by Mr. Bernard Frois, Director of the Department Energy, Transport, Environment and Natural Resources at the Technology Directorate of the Ministry of Research. 'France is happy to be a Member of CERN, which is a successful example of the construction of scientific Europe,' he declared during the inauguration, 'this exhibition is an excellent opportunity to put fundamental research and advanced technology in contact.' Mr. Philippe Petit, French Ambassador to Switzerland, and Mr. Alexandre Defay, technical adviser of the Minister of Research, were also present to represent France and its industry. Representing CERN at the 19 June opening of the exhibition was Claude Detraz, who said, 'I hope that this exhibition will make it possible to weave stronger links between ...

  1. CERN Mobility Survey

    CERN Multimedia

    GS Department

    2011-01-01

    The Institute of Shipping and Transport of the University of the Aegean and the National Technical University of Athens are partners with CERN in a study of mobility patterns between and within the CERN sites and to that effect have realized a mobility survey dedicated to the CERN community.         The study aims to understand: How you presently get around the CERN sites; What problems you encounter regarding mobility; What your needs are; What improvements you’d like to see; What measures you would like to see implemented most. The replies we receive will enable us to define a general policy promoting the diversity of mobility at CERN and to establish and quantify the strategic actions to be implemented for both the short and medium term. The objectives of the transport mobility plans are to: Facilitate mobility within and between the CERN sites by identifying adequate solutions in response to individual ...

  2. At PS170 (APPLE)

    CERN Multimedia

    1983-01-01

    APPLE stands for Antiproton-Proton to Pair of LEptons (an acronym of the ancestor experiment PAPLEP), the PS170 experiment setup at LEAR to study e+e-pair production in antiproton-proton annihilation by Padova-(CEN) Saclay- Torino Collaboration. It consisted of a liquid hydrogen target surrounded by several layers of proportional chambers in the vertical field of a C-magnet (this photo), a gas Cerenkov counter, wire chambers, hodoscopes, and an electromagnetic calorimeter (see photo 8302539X, 8302540X). See also photo 8301539X for the setup assembly at an early stage.

  3. The 1956 CERN Symposium

    CERN Document Server

    Jarlskog, Cecilia

    2014-01-01

    CERN, currently the largest organization in the world for particle physics, was founded in 1954. Originally located in Meyrin, at the outskirts of the city of Geneva in Switzerland, it has with time extended into neighboring France. The Theoretical Study Division of CERN, however, was created already in 1952, i.e., before the official inauguration of CERN. It was situated in Copenhagen. Christian Møller [1] was appointed (part-time) as the Director and there were two full time senior staff members, Gunnar Källén and Ben R. Mottelson. While constructing buildings and accelerators were in progress, an international conference was organized by CERN in the city of Geneva. This “CERN Symposium on High Energy Accelerators and Pion Physics”, 11–23 June 1956, attracted about 250 participants from outside CERN, among them at least 18 Nobel Laureates or future Laureates. Unfortunately, the participants from CERN are not listed in the Proceedings [2]. The conference focused on measuring devices such as bubbl...

  4. CERN: Digitally open, too

    CERN Multimedia

    Computer Security Team

    2013-01-01

    The Open Days are here!! From tomorrow onwards, we will be welcoming thousands of people to CERN. No barriers, no boundaries!   For decades, we have welcomed researchers and visitors from around the world to work at CERN, discuss physics research and attend our training sessions, lectures and conferences. This is how fundamental research should be conducted!!! But have you ever noticed how you are welcome at CERN in the digital world, too? Once you are affiliated and are registered with CERN, you receive a CERN computing account and e-mail address.  You can register your laptops, PCs and smartphones to use our (wireless) network, you can easily create your personal webpage, and profit from a vast disk space for file storage (AFS and DFS). CERN is indeed an Open Campus and not only during the Open Days. CERN is an Open Campus in the digital world. This digital Open Campus culture is exactly the reason why “computer security” has been dele...

  5. CERN honours its guides

    CERN Multimedia

    2004-01-01

    At the end of January, CERN's guides were rewarded for their devotion to the Laboratory. They have a passion for their work, know CERN inside-out and for 40 years have shown people of all ages and nationalities, from all walks of life, around the Laboratory. Who are they? Why, the CERN guides, of course. On 27 January, ten of CERN's 180 guides received special honours for their impressive number of guided tours in 2003. Presenting the awards in the Microcosm hall, CERN's Director-General Robert Aymar congratulated the winners on the key role they play with respect to the general public. "CERN would be nothing without you who show them its activities," he stressed. CERN's Director-General Robert Aymar congratulates Alberto Ribon for his tally of over 40 visits in the course of 2003.One of the prizes was the book «The Particle Odyssey». Here the book's co-author Christine Sutton dedicates it for Sijin Qian. Tzanko Spassoff (PH) and retired staff members Klaus Batzner and Antonio Francano wo...

  6. CERN in 2030

    CERN Multimedia

    Laëtitia Pedroso

    2011-01-01

    A competition will soon be launched to select the architect, urban planner or landscape designer to undertake the first phase of redevelopment of the parking area by the flagpoles, between Entrances A and B. This will be the first stage in a wider development project aimed at sprucing up the CERN site and enhancing its image. Work to create a pleasant and harmonious area at the CERN entrance will start in 2013 while preparatory work for other developments inside the CERN site has already begun…   CERN as it is today.  By 2030, CERN will be a greener place, much like a university campus. The arrival of the tramway on 30 April will be an opportunity to forge ahead with the urban plan aimed at rejuvenating the CERN site and redefining how it is organised. "Nearly sixty years after CERN's first buildings went up, this plan will help transform the site and give it a welcoming, friendly face, a bit like a university campus," explains Thierry Chanard, urban plannin...

  7. La Hollande au CERN

    CERN Multimedia

    CERN Press Office. Geneva

    1995-01-01

    On 17 October the third industrial exhibition, "Holland at CERN" was officially opened by Dr R.J. van Duinen, President of the Dutch Organisation for Scientific Research (NWO). In his opening speech he encouraged scientific organisations such as CERN to take full advantage of industry's ability to design and invent new processes and equipment stressing that the purpose of the "Holland at CERN" exhibition was not simply to sell equipment, but to establish an efficient cross-fertilisation between fundamental science and industry.

  8. CERN 50th Anniversary : CERN's 50th anniversary celebrations drew to a close with a ceremony at Geneva University's Institut de Physique.

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    For it was here, on the banks of the River Arve, that CERN's first staff members, from the PS Magnets Group, came to work in October 1953. A commemorative plaque was inaugurated by Robert Aymar, CERN's Director-General, Charles Beer, State Councillor for the Canton of Geneva responsible for the Department of Public Education, and André Hurst, Rector of the University (Picture 01)

  9. Beyond iPS!

    Directory of Open Access Journals (Sweden)

    Editorial

    2012-01-01

    Full Text Available It’s undoubtedly a jubilant moment for scientists and clinicians working in the stem cell arena as Prof. Gurdon and Prof. Shinya Yamanaka have been chosen for the Nobel Prize in Physiology & Medicine this year. The mystery of cell biology is something unfathomable and probably the work of this duo as well as the other scientists, who have put their hands on in- vitro de-differentiation have opened our eyes to a new window or a new paradigm in cell biology. The iPS invention has brought a lot of hope in terms of potential direct benefits to treat several diseases, which have no definite options at the moment. But, we envisage that several spin-offs could come out of this invention and one very significant spin-off finding recently witnessed is the finding by Prof. Masaharu Seno and his team of researchers at the Okayama University, Japan (Chen L, et al. 2012, PLoS ONE 7(4:e33544.doi:10.1371/journal.pone.0033544. According to Prof. Seno, mouse iPS cells (miPS when cultured in the conditioned medium derived from cancer cell lines, differentiate into cancer stem cells (CSCs. While differentiating into CSCs, they do retain the potential to develop endothelial progenitor cells. Several questions arise here: 1.Are these miPS derived CSCs really pluripotent, even if the terminal differentiation destined to specific phenotypes? 2.Shouldn’t the Cancer Stem Cells be termed as cancer progenitor cells, as till date they are considered to be producing only cancer cells but not pluripotent to yield other types of normal tissues? The spin-offs could be infinite as the process of differentiation and de-differentiation happening due to trillions of signals and pathways, most still remaining not-so-well understood. A special mention should be made to Prof. Shinya Yamanaka as he has several sterling qualities to be a role-model for budding scientists. Apart from his passion for science, which made him shift his career from orthopedics to a cell biologist, his

  10. CERN achievements in relativistic heavy ion collisions

    Directory of Open Access Journals (Sweden)

    Bruno Giuseppe Eugenio

    2015-01-01

    Full Text Available Twenty years after a Letter of Intent by the GSI and LBL groups for the “Study of particle production and target fragmentation in central 20Ne on Pb reactions, at 12 GeV per nucleon energy of the CERN PS external beam" [1], based on the results found by the NA45/CERES, NA49, NA50, and WA97/NA57 experiments at the SPS, CERN announced compelling evidence for the formation of a new state of matter in heavyion collisions at CERN-SPS energies [2]. Some of the experiments were indeed the 2nd or 3rd generation successors of the apparatuses originally proposed by the GSI-LBL collaboration. Actually, the CERN ion program initiated at the SPS with the acceleration of oxygen ions at 60 and 200 GeV/nucleon only in 1986, and continued with sulphur ions at 200 GeV/nucleon up to 1993. The rest is history: lead-ion beams at 160 GeV/nucleon became available at the SPS in 1994; the LHC accelerated and collided lead beams at a center of mass energy per nucleon pair √sNN = 2.76 TeV in 2010. Heavy ion physics is definitely in the future program of CERN: ALICE will operate a major upgrade of its detectors during the second long shutdown of the LHC, in 2018-2019, and the associated physics program will span the third and fourth LHC runs, till late 2020s.

  11. Upgrade of the CERN PSB/CPS Fast Intensity Measurements

    CERN Document Server

    Monera Martinez, A; Belohrad, D; Jensen, L; Soby, L; Kasprowicz, G

    2011-01-01

    The CERN Proton Synchrotron Booster (PSB) and Proton Synchrotron (CPS) complex fast intensity measurement is undergoing a major upgrade. The old analogue electronics no longer provides enough accuracy, resolution and versatility to perform accurate beam intensity measurements. It has also become less reliable due to the ageing equipment. A new measurement system - Transformer Integrator Card (TRIC) - replaces these obsolete acquisition systems. TRIC is a generic platform used to measure the intensity in different transfer lines at CERN. Five TRICs were installed during the year 2010 in order to evaluate their performance with different beam types, from the low intensity pilot (5×10 9 charges per bunch) to high intensity beams (1×10 13 charges per bunch). The aim of this article is to present the technical aspects of the new system and the different measurement scenarios. It discusses possible sources of measurement errors and presents some statistical data acquired during this period.

  12. Summary of Booster Development and Qualification Report

    Energy Technology Data Exchange (ETDEWEB)

    Francois, Elizabeth G. [Los Alamos National Laboratory; Harry, Herbert H. [Los Alamos National Laboratory; Hartline, Ernest L. [Los Alamos National Laboratory; Hooks, Daniel E. [Los Alamos National Laboratory; Johnson, Carl E. [Los Alamos National Laboratory; Morris, John S. [Los Alamos National Laboratory; Novak, Alan M. [Los Alamos National Laboratory; Ramos, Kyle J. [Los Alamos National Laboratory; Sanders, Victor E. [Los Alamos National Laboratory; Scovel, Christina A. [Los Alamos National Laboratory; Lorenz, Thomas [LLNL; Wright, Mark [AWE; Botcher, Tod [PANTEX; Marx, Erin [NSWC-IHDIV; Gibson, Kevin [NSWC-IHDIV

    2012-06-21

    This report outlines booster development work done at Los Alamos National Laboratory from 2007 to present. The booster is a critical link in the initiation train of explosive assemblies, from complex devices like nuclear weapons to conventional munitions. The booster bridges the gap from a small, relatively sensitive detonator to an insensitive, but massive, main charge. The movement throughout the explosives development community is to use more and more insensitive explosive components. With that, more energy is needed out of the booster. It has to initiate reliably, promptly, powerfully and safely. This report is divided into four sections. The first provides a summary of a collaborative effort between LANL, LLNL, and AWE to identify candidate materials and uniformly develop a testing plan for new boosters. Important parameters and the tests required to measure them were defined. The nature of the collaboration and the specific goals of the participating partners has changed over time, but the booster development plan stands on its own merit as a complete description of the test protocol necessary to compare and qualify booster materials, and is discussed in its entirety in this report. The second section describes a project, which began in 2009 with the Department of Defense to develop replacement booster formulations for PBXN-7. Replacement of PBXN-7 was necessary because it contained Triaminotrinitrobenzene (TATB), which was becoming unavailable to the DoD and because it contained Cyclotrimethylenetrinitramine (RDX), which was sensitive and toxic. A LANL-developed explosive, Diaminoazoxyfurazan (DAAF), was an important candidate. This project required any replacement formulation be a drop-in replacement in existing munitions. This project was timely, in that it made use of the collaborative booster development project, and had the additional constraint of matching shock sensitivity. Additionally it needed to be a safety improvement, and a performance

  13. Cryogenics at CERN

    CERN Document Server

    Passardi, Giorgio

    2002-01-01

    The use of cryogenics at CERN was originated (in the 1960s) by High Energy Physics detectors requiring low temperature technologies to achieve the desired performance and indicates a sustained trend during the entire evolution of the CERN experimental program. More recently (in the 1980s) the need of cryogenics for CERN accelerators has shown an impressive increase due to the development of superconducting accelerating cavities and high field bending magnets. Today, the two largest detectors (ATLAS and CMS) of the LHC accelerator ask for a considerable variety of cryogenic equipments and the 27 km LHC magnets ring requires the largest 1.8 K helium refrigeration and distribution systems in the world. The status of CERN cryogenics is briefly reviewed including those systems not related to the LHC complex.

  14. Open Hardware at CERN

    CERN Multimedia

    CERN Knowledge Transfer Group

    2015-01-01

    CERN is actively making its knowledge and technology available for the benefit of society and does so through a variety of different mechanisms. Open hardware has in recent years established itself as a very effective way for CERN to make electronics designs and in particular printed circuit board layouts, accessible to anyone, while also facilitating collaboration and design re-use. It is creating an impact on many levels, from companies producing and selling products based on hardware designed at CERN, to new projects being released under the CERN Open Hardware Licence. Today the open hardware community includes large research institutes, universities, individual enthusiasts and companies. Many of the companies are actively involved in the entire process from design to production, delivering services and consultancy and even making their own products available under open licences.

  15. Rejuvenating CERN's Accelerators

    CERN Multimedia

    2004-01-01

    In the coming years and especially in 2005, CERN's accelerators are going to receive an extensive renovation programme to ensure they will perform reliably and effectively when the LHC comes into service.

  16. CERN recognises LHC suppliers

    CERN Multimedia

    2002-01-01

    CERN has just presented the first awards recognising LHC suppliers. The Russian institute BINP, the Belgian firm Cockerill-Sambre and the US company Wah-Chang are the recipients of the first 'Golden Hadrons'.

  17. PACMAN at CERN

    CERN Multimedia

    2015-01-01

    PACMAN Particle Accelerator Components Metrology and Alignment to the Nanometre scale. PACMAN is an Innovative Doctoral Program Network, offering training to 10 Early Stage Researchers hosted by CERN thanks to The European Commission FP7 Marie Curie Actions.

  18. YOUR LIFE@CERN

    CERN Multimedia

    Guinot, Genevieve

    2016-01-01

    Balancing work and home life, getting support for your family and thriving in an inclusive and respectful workplace: find out more about the support structures in place to enhance your working life@CERN!

  19. CERN scientists predict supernova

    CERN Multimedia

    2003-01-01

    "A team of theoretical physicists working at CERN and the Technion Institute of Technology in Israel has developed a theory to account for the mysterious gamma ray bursts that come from the depths of the Universe" (1/2 page).

  20. Fusion Revisits CERN

    CERN Multimedia

    2001-01-01

    It's going to be a hot summer at CERN. At least in the Main Building, where from 13 July to 20 August an exhibition is being hosted on nuclear fusion, the energy of the Stars. Nuclear fusion is the engine driving the stars but also a potential source of energy for mankind. The exhibition shows the different nuclear fusion techniques and research carried out on the subject in Europe. Inaugurated at CERN in 1993, following collaboration between Lausanne's CRPP-EPFL and CERN, with input from Alessandro Pascolini of Italy's INFN, this exhibition has travelled round Europe before being revamped and returning to CERN. 'Fusion, Energy of the Stars', from 13 July onwards, Main Building

  1. Industrial Activity at CERN

    CERN Document Server

    Kowalik, G

    2000-01-01

    The decrease in the number of CERN staff creates the need for optimization of the non-core, infrastructure-related activities. An industrial, service-orientated approach has long been considered as an appropriate way to cope with the problem of diminishing resources. This paper presents industrial and service activity issues at CERN based on the experience of the exploitation of the power network. The most important problems linked to the application of the industrial approach to the exploitation of equipment in the CERN research environment are covered. These include the interface between accelerators and electrical exploitation services, external and internal regulations, sharing of responsibility between CERN staff and external contractors, continuous modification of clients' requirements, the balance between the cost of accelerator downtime versus the cost of infrastructure upgrade. A benchmarking through a comparison with a big industrial manufacturer is followed by recommendations for possible improveme...

  2. Iran approaches CERN

    CERN Multimedia

    2002-01-01

    Members of Parliament from the Islamic Republic of Iran visit SM18. From left to right : Ali Mojtahed-Shabestari, Deputy Ambassador of the Islamic Republic of Iran in Geneva, Diether Blechschmidt, from CERN, Abdol-Rahim Baharvand and Hossain Amiri, from the Iranian Parliament, Norbert Siegel, from CERN, Hossain Afarideh, Rasool Seddighi and Ahmad Shirzad from the Iranian Parliament. Five members of the Parliament of the Islamic Republic of Iran visited CERN for three days at the beginning of May. All of them have PhD's in Physics, as well as holding their job in politics. They are involved in legislation for science, research and education funding in Iran. Apart from their interest in CERN in general, they were especially attracted to the CMS detector, since an Iranian contribution to the LHC is now starting through a collaboration with the Institute for Studies in Theoretical Physics and Mathematics in Tehran.

  3. Safety at CERN

    CERN Document Server

    2009-01-01

    Safety is an integral part of our working lives, and should be in our minds whatever job we do at CERN. Ultimately, safety is the responsibility of the Director General – your safety is my concern. That’s why I have this week appointed a new Safety Policy Committee (SAPOCO) that reflects the new Organizational structure of CERN. CERN’s Staff Rules and Regulations clearly lay out in chapter 3 the scope of safety at CERN as well as my responsibilities and yours in safety matters. At CERN, safety is considered in the broadest sense, encompassing occupational Health and Safety, environmental protection, and the safety of equipment and installations. It is my responsibility to put appropriate measures in place to ensure that these conditions are met. And it is the responsibility of us all to ensure that we are fully conversant with safety provisions applicable in our areas of work and that we comply with them. The appointment of a n...

  4. CERN Science and Technology

    OpenAIRE

    Di Meglio, Alberto

    2015-01-01

    A high-level overview of the relationship between science and technology at CERN and the impact of technology on research with a focus on ICT technologies. Presented as a 12-minute "power-talk" at CIOCity 2015, Brussels

  5. La nascita del CERN

    CERN Multimedia

    Fidecaro, Giuseppe

    2004-01-01

    CERN was born on 30th September 1954, after the ratification of the Convention by the Member States. After the war, there was a need for international collaboration to rebuild the half-destroyed Europe (2 pages)

  6. CERN stationery rejuvenated

    CERN Multimedia

    Anaïs Schaeffer

    2013-01-01

    With the introduction of CERN’s new graphic charter, our complete range of official communications stationery has been redesigned. Discover the newly harmonised and standardised range of CERN stationery.   As the Director-General announced in Bulletin 41-42/2012, a new graphic charter is now in force at CERN. The graphics team has taken this opportunity to redesign all the official CERN stationery, such as business cards, correspondence cards, letterheads, envelopes and file holders, all of which will now boast the same, unified format. In keeping with CERN’s new graphic charter, even the business cards have had a makeover: of a better quality than their predecessors, they now elegantly display the CERN colours (namely the familiar Pantone 286 blue). These new cards, which all follow a standardised format, help to project a standardised corporate image of the Organization. Order them online now! As the Director-General highlighted, “it's increasingly imp...

  7. Indian President visits CERN

    CERN Multimedia

    Katarina Anthony

    2011-01-01

    On 1 October, her Excellency Mrs Pratibha Devisingh Patil, President of India, picked CERN as the first stop on her official state visit to Switzerland. Accompanied by a host of Indian journalists, a security team, and a group of presidential delegates, the president left quite an impression when she visited CERN’s Point 2!   Upon arrival, Pratibha Patil was greeted by CERN Director General Rolf Heuer, as well as senior Indian scientists working at CERN, and various department directors. After a quick overview of the Organization, Rolf Heuer and the President addressed India’s future collaboration with CERN. India is currently an Observer State of the Organization, and is considering becoming an Associate Member State. A short stop in LHC operations gave Steve Myers and the Accelerator team the opportunity to take the President on a tour through the LHC tunnel. From there, ALICE’s Tapan Nayak and Spokesperson Paolo Giubellino took Pratibha Patil to the experiment&am...

  8. Ex / Noise / CERN / Deerhoof

    CERN Multimedia

    CERN, SM18,

    2015-01-01

    Indie rockers Deerhoof battled with the noise of CERN’s magnet test facilities on 30 August 2015. The band visited CERN at the invitation of ATLAS physicist James Beacham, whose pilot project Ex/Noise/CERN collides experimental music artists with experimental particle physics. Credits: -Producer- CERN Video Productions James Beacham François Briard -Director- Noemi Caraban -Camera- Yann Krajewski Piotr Traczyk Noemi Caraban -Crane operator- Antonio Henrique Jorge-Costa -Live recording at CERN- Mixing at Rec studio/Geneva By Serge Morattel -Infography- Daniel Dominguez Noemi Caraban -Deerhoof- John Dieterich Satomi Matsuzaki Ed Rodriguez Greg Saunier w/Deron Pulley SPECIAL THANKS TO: Michal Strychalski Marta Bajko Maryline Charrondiere Luca Bottura Christian Giloux Rodrigue Faes Mariane Catallon Georgina Hobgen Hailey Reissman Marine Bass

  9. Britain exhibition at CERN

    CERN Multimedia

    Bertin; CERN PhotoLab

    1969-01-01

    The United Kingdom inaugurated the Industrial Exhibitions in 1968, and it wasn't till 1971 that other countries staged exhibitions at CERN. This photo was taken in 1969, at the second British exhibition, where 16 companies were present.

  10. Star spotting at CERN

    CERN Multimedia

    2008-01-01

    This June, two American celebrities (and physics enthusiasts!) came to CERN. Brian Cox gave Mike Einziger (right), lead guitarist with the rock band Incubus, the star treatment in the ATLAS cavern. Jesse Dylan embraces the spirit of ATLAS! Mike Einziger, lead guitarist with the rock band Incubus, visited CERN on Friday 13 June between concerts in Finland and England. Einziger, a lifelong science enthusiast descended into the ATLAS and CMS caverns and visited the SM18 test magnet facility during his brief tour of CERN. Einziger learned about the LHC through watching online lectures from University of Manchester and ATLAS physicist Brian Cox, and was thrilled to have the chance to see the detectors in person. The musician has created an orchestral piece, inspired in part by the work being done at CERN for the LHC, which will have its debut in Los Angeles on 23 August. Just over a week earlier, Jesse Dylan, Hollywood film director a...

  11. CERN confirms LHC schedule

    CERN Multimedia

    2003-01-01

    The CERN Council held its 125th session on 20 June. Highlights of the meeting included confirmation that the LHC is on schedule for a 2007 start-up, and the announcement of a new organizational structure in 2004.

  12. CERN meets Facebook

    CERN Document Server

    2012-01-01

    Social networking sites like LinkedIn, MySpace, Google+ and Facebook are on the rise. In particular, the life of youngsters revolves more and more around these sites as they facilitate communication, networking and the exchange of niceties. Who does not today already have an account registered with one of them? A Facebook profile can contain photos, listings of hobbies, job information, preferences…   The on-going effort to externalise some of CERN's computing resources continues, and in order to promote a unified interface for personal information, CERN has decided to establish a partnership with Facebook starting on 1stApril. "CERN is a public and trustworthy international organisation, and as such, our staff and users have nothing to hide from the general public," said Alexi Spiner (IT), project leader responsible for this migration: * The computer profiles of all CERN users will be integrated into the Facebook portal; * In addition, we will also ...

  13. CERN at ESOF 2016

    CERN Document Server

    James Gillies

    2016-01-01

    CERN had a major presence at the ESOF2016 conference this week, largely in collaboration with our EIROforum partners. A keynote session featuring the CERN Director-General, Fabiola Gianotti, EMBL Director-General, Iain Mattaj, and ESO Director for Science, Rob Ivison, and chaired by BBC science correspondent Pallab Ghosh debated the value of European collaboration in science.   The focal point of EIROforum’s presence was a stand highlighting the societal benefit of EIROforum science. (Image: Matt Wilkinson Photography/ ESOF 2016) A double session covered the science of the EIROs, with ATLAS physicist Claire Lee representing CERN, and there was a session exploring the ways that the EIROforum organisations create business value locally, with the leader of the Knowledge Transfer group, Giovanni Anelli, representing CERN. The focal point of EIROforum’s presence was a stand highlighting the societal benefit of EIROforum science. Side events linked to the stand discussed subjects su...

  14. CERN, Accelerating Science

    CERN Multimedia

    De Melis, Cinzia

    2015-01-01

    What is the Universe made of? Where did it come from, where is it going and why does it behave the way it does? These are some of the questions that CERN set out to address when a small number of pioneering scientists created Europe’s first scientific international organization. Founded in 1954, in the aftermath of the Second World War, CERN is not only a first-class centre for fundamental research but also a pioneering adventure in international collaboration.

  15. Germany at CERN

    CERN Multimedia

    2001-01-01

    The Eighth Exhibition of German Industry, "Germany at CERN" started this week and offers German companies the opportunity to establish professional contacts with CERN. From left to right in the foreground: Maximilian Metzger (BMBF), Bettinna Schöneseffen (BMBF), Karl-Heinz Kissler (SPL division leader), Horst Wenninger, and Hans Hoffman. Behind and to the right of Karl-Heinz Kissler is His Excellency Mr Walter Lewalter, Ambassador and permanent representative of Germany to the UN office in Geneva.

  16. Cern Women's Club

    CERN Multimedia

    Cern Women's Club

    2014-01-01

      CERN WOMEN’S CLUB   Coffee Morning Tuesday 10th  June 2014, 12:30   Annual Club Lunch at the restaurant “Le Coq Rouge” in St-Genis-Pouilly Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://web.cern.ch/Club-WomensClub/

  17. Cern women's club

    CERN Multimedia

    Club des cernoises

    2014-01-01

    CERN WOMEN’S CLUB Coffee Morning Tuesday 13th  May 2014, 9:30 Bldg 504,  (Restaurant No 2 – DSR) 1st Floor, Club Room 3   Annual General Meeting Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://cern.ch/Club-WomensClub/

  18. CERN permanent exhibitions

    CERN Multimedia

    2016-01-01

    Explore by yourself the issues CERN's physicists are trying to solve: given that the entire universe is made of particles, where do they come from? Why do they behave in the way they do? Discover the massive apparatus used by physicists at CERN, like the LHC, and see how each part works. And if you have more time on site, follow the LHC circuit at ground level to understand in situ this giant machine. Enter our exhibitions. Welcome!

  19. Future Perspectives at CERN

    OpenAIRE

    Ellis, John

    2002-01-01

    Current and future experiments at CERN are reviewed,with emphasis on those relevant to astrophysics and cosmology. These include experiments related to nuclear astrophysics, matter-antimatter asymmetry, dark matter, axions, gravitational waves, cosmic rays, neutrino oscillations, inflation, neutron stars and the quark-gluon plasma. The centrepiece of CERN's future programme is the LHC, but some ideas for perspectives after the LHC are also presented.

  20. CERN expositions permanentes

    CERN Multimedia

    2016-01-01

    Explore by yourself the issues CERN's physicists are trying to solve: given that the entire universe is made of particles, where do they come from? Why do they behave in the way they do? Discover the massive apparatus used by physicists at CERN, like the LHC, and see how each part works. And if you have more time on site, follow the LHC circuit at ground level to understand in situ this giant machine. Enter our exhibitions. Welcome!

  1. CERN Library | Agnes Chavez @ CERN | 3 May

    CERN Multimedia

    CERN Library

    2016-01-01

    Agnes Chavez is an artist and educator participating in a two-week research stay through the ATLAS Experiment at CERN.   Tuesday 3 May at 4 p.m. CERN Library (52 1-052) Artist/educator, Agnes Chavez will share video outcomes from Projecting Particles, an Art + Science + Education collaboration with ATLAS. The Sci-Art project combines the International Masterclass with Projection Art in a series of teen-led youth workshops and projection events. In this presentation Chavez will share her vision and describe the research and development behind the project, now in its third year.  For the Projecting pARTicles series of art installations she has formed an interdisciplinary team of programmers, artists, scientists and educators to investigate how we can create art and education interventions inspired by emerging particle physics theories. Chavez’s art experiments with data visualization, sound and projections to create participatory environments. She collaborates with programmers t...

  2. POPS: the 60MW power converter for the PS accelerator: Control strategy and performances

    CERN Document Server

    Boattini, Fulvio; Skawinski, Gregory

    2015-01-01

    The main power supply of Proton-Synchrotron (PS) accelerator is one of the biggest at CERN. The old rotating machine system has been replaced with a new NPC based DC/DC power supply named POPS (Power system for PS main magnets) with capacitor banks as energy storage mean. POPS is in operation since February 2011. The operation of the PS accelerator requires a specific design of the control system with very high performance requirements in term of accuracy and precision. This paper describes the main lines of the control strategies analyzing the problems encountered and the solutions adopted. The performances of the converter are presented throughout the paper.

  3. CREATIVE COLLISIONS: ARTS @CERN

    CERN Document Server

    CERN. Geneva

    2012-01-01

    In 2000, CERN hosted Signatures of the Invisible – one of the landmark initiatives in arts and science. In 2012, CERN is now initiating its own science/arts programme Collide@CERN in different arts disciplines. The first of these is in digital arts, and the international competition to find the winning artist is called the Prix Ars Electronica Collide@CERN. It was announced September 2011 at CERN’s first collaboration with an international arts festival – Ars Electronica in Linz. The competition attracted over 395 entries from 40 countries around the world. The winning artist, Julius Von Bismarck, will begin his two month residency here at CERN next month. Ariane Koek who leads on this initiative, discusses the residency programme, as well as the background about Art@CERN. History has shown that particle physics and the arts are great inspiration partners. The publication of the paper by Max Planck which gave birth to quantum mechanics as well as those by Einstein, heavily influenced some of the grea...

  4. CERN Pensioners Association

    CERN Multimedia

    The GAC Committee

    2004-01-01

    Open Day To all CERN retired staff As part of the celebrations organised for the 50th anniversary of CERN, an Open Day will be held on Saturday 16 October 2004. Anyone willing to act as a guide, either to help and inform visitors at the reception points or to guide groups of visitors, sharing your knowledge with them, is invited to fill in the attached form. A preparatory meeting will be arranged for those who left CERN some time ago and whose knowledge of the site may no longer be quite up-to-date. The Open Day organisers need your help, which will be very much appreciated. We hope that many pensioners will participate. People with internet access may enrol directly without coming to CERN, http://www.cern.ch/CERN50/openday The GAC Committee OPEN DAY : CALL FOR VOLUNTEERS 16th October 2004 So now you are excited about the Open Day, how can you participate? As you can imagine, for such a large number of activities, we need many volunteers. Please return the following form to Elena Battis...

  5. CERN Relay Race

    CERN Multimedia

    Running Club

    2010-01-01

    This year’s CERN Relay Race will take place around the Meyrin site on Thursday 20th May at 12h00. This annual event is for teams of 6 runners covering distances of 1000m, 800m, 800m, 500m, 500m and 300m respectively. Teams may be entered in the Seniors, Veterans, Ladies, Mixed or Open categories. The registration fee is 10 CHF per runner, and each runner receives a souvenir prize. As usual, there will be a programme of entertainments from 12h in the arrival area, in front of the Restaurant no. 1. Drinks, food, CERN club information and music will be available for the pleasure of both runners and spectators. The race starts at 12h15, with results and prize giving at 13:15.   For details of the race, and of how to sign up a team, please visit: https://espace.cern.ch/Running-Club/CERN-Relay The event is organised by the CERN Running Club with the support of the CERN Staff Association.  

  6. CERN In Focus

    CERN Document Server

    CERN audiovisual service

    2008-01-01

    First edition 2008 of Cern in Focus. On behalf of the audiovisual team, a selection of the latest videos filmed at CERN. Every six weeks, we will bring you the latest in CERN's activities, from LHC start up to the Computing Grid, featuring the experiments and many other goings-on at CERN. The agenda of this first edition of CERN in Focus features the visit of the prime minister of Malta, Lawrence Gonzi... CMS and the final descent of the YE-1 end cap... The departure of UA1 magnets to Japan... The start up of sectors 4 and 5... And finally, in our sports round up... We'll talk about football. New in brief this month... The final bolt is in place : On 7th November, in the bowels of the LHC tunnel, CERN's Director General Robert Aymar tightened a gold-plated bolt for the last arc interconnection of sector 1-2. This symbolic gesture marks the completion of all the arc interconnections of the LHC. Last welding work: it was never going to be an easy task. On this day last year just one sector had been completed,...

  7. CERN openlab Open Day

    CERN Multimedia

    Andrew Purcell

    2015-01-01

    CERN openlab is the unique public-private partnership between CERN and leading companies in the field of information and communication technology. The programme is now entering an exciting new phase and is expanding to include other public research organisations for the first time. A special event will be held at CERN to mark this occasion.   CERN openlab was created in 2001 and is now entering its fifth three-year phase (2015-2017). Its mission is to accelerate the development of cutting-edge solutions to be used by the scientific community to control the operations of complex machines and to analyse the vast amounts of data produced by physics experiments. During Run 2 of the LHC, it is expected that the CERN Data Centre will store more than 30 petabytes of data per year from the LHC experiments, which is equivalent to about 1.2 million Blu-ray discs, or 250 years of HD video. Testing in this demanding environment provides the companies collaborating in CERN openlab with valuable feedback o...

  8. Developing the World's Most Powerful Solid Booster

    Science.gov (United States)

    Priskos, Alex S.; Frame, Kyle L.

    2016-01-01

    NASA's Journey to Mars has begun. Indicative of that challenge, this will be a multi-decadal effort requiring the development of technology, operational capability, and experience. The first steps are underway with more than 15 years of continuous human operations aboard the International Space Station (ISS) and development of commercial cargo and crew transportation capabilities. NASA is making progress on the transportation required for deep space exploration - the Orion crew spacecraft and the Space Launch System (SLS) heavy-lift rocket that will launch Orion and large components such as in-space stages, habitat modules, landers, and other hardware necessary for deep-space operations. SLS is a key enabling capability and is designed to evolve with mission requirements. The initial configuration of SLS - Block 1 - will be capable of launching more than 70 metric tons (t) of payload into low Earth orbit, greater mass than any other launch vehicle in existence. By enhancing the propulsion elements and larger payload fairings, future SLS variants will launch 130 t into space, an unprecedented capability that simplifies hardware design and in-space operations, reduces travel times, and enhances two solid propellant five-segment boosters, both based on space shuttle technologies. This paper will focus on development of the booster, which will provide more than 75 percent of total vehicle thrust at liftoff. Each booster is more than 17 stories tall, 3.6 meters (m) in diameter and weighs 725,000 kilograms (kg). While the SLS booster appears similar to the shuttle booster, it incorporates several changes. The additional propellant segment provides additional booster performance. Parachutes and other hardware associated with recovery operations have been deleted and the booster designated as expendable for affordability reasons. The new motor incorporates new avionics, new propellant grain, asbestos-free case insulation, a redesigned nozzle, streamlined manufacturing

  9. Beam tests on a proton linac booster for hadron therapy

    CERN Document Server

    De Martinis, C; Berra, P; Birattari, C; Calabretta, L; Crandall, K; Giove, D; Masullo, M R; Mauri, M; Rosso, E; Rovelli, A; Serafini, L; Szeless, Balázs; Toet, D Z; Vaccaro, Vittorio G; Weiss, M; Zennaro, R

    2002-01-01

    LIBO is a 3 GHz modular side-coupled proton linac booster designed to deliver beam energies up to 200 MeV, as required for the therapy of deep seated tumours. The injected beam of 50 to 70 MeV is produced by a cyclotron like those in several hospitals and research institutes. A full-scale prototype of the first module with an input/output energy of 62/74 MeV, respectively, was designed and built in 1999 and 2000. Full power RF tests were carried out successfully at CERN using a test facility at LIL at the end of the year 2000. In order to prove the feasibility of the acceleration process, an experimental setup with this module was installed at the INFN Laboratorio Nazionale del Sud (LNS) in Catania during 2001. The superconducting cyclotron provided the 62 MeV test beam. A compact solid-state RF modulator with a 4 MW klystron, made available by IBA-Scanditronix, was put into operation to power the linac. In this paper the main features of the accelerator are reviewed and the experimental results obtained duri...

  10. Beam loss monitors comparison at the CERN Proton Synchrotron

    CERN Document Server

    Gilardoni, S S; Effinger, E; Gil-Flores, J; Wienands, U

    2011-01-01

    CERN is planning the renovation and upgrade of the beam loss detection system for the Proton Synchrotron (PS). Improved performance in speed–to be able to monitor beam loss on a bunch-by-bunch basis–and in longterm stability–to reduce or avoid the need for periodic calibration–are aimed for. To select the most suitable technology, different detectors were benchmarked in the machine with respect to the same beam loss. The characteristics of the different detectors, the results of the measurement campaign and their suitability as future monitors for the PS are presented.

  11. Spotlight on CERN : Recruitment and professions at CERN

    CERN Multimedia

    CERN video productions

    2010-01-01

    Spotlight on CERN No. 3 Recruitment and professions at CERN Welcome to the Globe of Science and Innovation for this third edition of "Spotlight on CERN". When one thinks about professions at CERN, what springs to mind? Physicists? Engineers? In fact, the smooth operation of the Organisation relies on a diversity of professions and this in itself, poses a real challenge in terms of recruitment in CERN member states. Today, to tell us more about this challenge and about CERN professions in general, we welcome James Purvis, Head of the HR Recruitment, Programmes and Monitoring group, and Lore Taillieu, leader of the group's Recruitment section.

  12. Experiments at CERN in 1985

    International Nuclear Information System (INIS)

    This book is a compilation of the current experimental program at CERN. The experiments listed are being performed at one of the following machines: the Super Proton Synchrotron (SPS), the Proton Synchrotron (PS) and the Synchro-Cyclotron (SC). The four experiments to be done by means of the Large Electron Positron machine (LEP) are also listed. The schematic layouts of beams and experiments at the various machines are given in the beginning of the report. The experiment goals and methods are briefly described and a schematic layout of the apparatus is included. Lists of participants and their institutions are also given. The status of the experiments (preparation, data-taking, completed) corresponds to the situation as of 1st November, 1985. ''Completed'' means only that data-taking is finished, not necessarily the analysis of the results; this status is kept for two years and then the experiment is removed from the catalogue. A complete list of all experiments published in this book since 1975 is given at the end of the catalogue. (orig./HSI)

  13. The CPLEAR detector at CERN

    CERN Document Server

    Adler, R; Alhalel, T; Angelopoulos, Angelos; Apostolakis, Alcibiades J; Aslanides, Elie; Backenstoss, Gerhard; Bal, F; Bard, J P; Barraca, D; Bee, C P; Behnke, O; Benelli, A; Bennet, J; Bertin, V; Blanc, F; Bloch, P; Bonnet, M; Bula, C; Calzas, A; Carlson, P J; Carroll, M; Carvalho, J; Cawley, E; Charalambous, S; Chardalas, M; Chardin, G; Charra, P; Chertok, M B; Cody, A; Da Silva, J; Damianoglou, D; Daniel, R; Danielsson, M; Dechelette, Paul; Dedieu, M; Dedoussis, S; Dejardin, M; Derré, J; Dijksman, A; Dinkespiler, B; Dodgson, M; Dröge, M; Duclos, J; Dudragne, J; Durand, D; Ealet, A; Eckart, B; Eleftheriadis, C; Engster, Claude; Evangelou, I; Faravel, L; Fassnacht, P; Faure, J L; Felder, C; Ferreira-Marques, R; Fetscher, W; Fidecaro, Maria; Filipcic, A; Francis, D; Fry, J; Fuglesang, C; Gabathuler, Erwin; Gally, Y; Gamet, R; Garreta, D; Geiss, D; Geralis, R; Gerber, H J; Go, A; Gumplinger, P; Guyon, D; Guyot, C; Harrison, P; Harrison, P F; Haselden, A; Hayman, P J; Hazen, E S; Henry-Coüannier, F; Heyes, W G; Hollander, R W; Hubert, E; Jacobs, C; Jansson, K; Johner, H U; Jon-And, K; Karkour, N; Kérek, A; Kesseler, G; Kettle, P R; King, D; Klados, T; Kochowski, Claude; Kokkas, P; Kontek, K; Kreuger, R; Lawry, T; Lecouturier, T; Le Gac, R; Leimgruber, F; Linget, D; Liolios, A; Löfstedt, B; Louis, F; Machado, E; Maley, P; Mall, U; Mandic, I; Manthos, N; Marel, Gérard; Marin, C P; Martin, H; Michau, J C; Mikuz, M; Miller, J; Montanet, François; Nakada, Tatsuya; Nanni, F; Onofre, A; Pagels, B; Papadopoulos, I M; Pavlopoulos, P; Pelucchi, F; Petit, P; Philippoussis, K; Pinto da Cunha, J; Policarpo, Armando; Polivka, G; Postma, H; Rheme, C; Rickenbach, R; Roberts, B L; Rozaki, E; Ruf, T; Sacks, L; Sakelliou, L; Sanders, P; Santoni, C; Sarigiannis, K; Schäfer, M; Schaller, L A; Schietinger, T; Schopper, A; Schune, P; Soares, A; Steinacher, M; Tatsis, S; Tauscher, Ludwig; Thibault, C; Touchard, F; Touramanis, C; Triantis, F A; Tröster, D A; Tsamouranis, I; Tschopp, H; Tsilimigras, Panayiotis; Van Beveren, E; van Eijk, C W E; Van Koningsfeld, V; Vanuxem, J P; Varner, G S; Verweij, H; Vlachos, S; Warner, D; Watson, E; Weber, P; Wendler, H; Wigger, O; Witzig, C; Wolter, M; Yéche, C; Zavrtanik, D; Zimmerman, D

    1996-01-01

    The CPLEAR collaboration has constructed a detector at CERN for an extensive programme of CP-, T- and CPT-symmetry studies using ${\\rm K}^0$ and $\\bar{\\rm K}^0$ produced by the annihilation of $\\bar{\\rm p}$'s in a hydrogen gas target. The ${\\rm K}^0$ and $\\bar{\\rm K}^0$ are identified by their companion products of the annihilation ${\\rm K}^{\\pm} \\pi^{\\mp}$ which are tracked with multiwire proportional chambers, drift chambers and streamer tubes. Particle identification is carried out with a liquid Cherenkov detector for fast separation of pions and kaons and with scintillators which allow the measurement of time of flight and energy loss. Photons are measured with a lead/gas sampling electromagnetic calorimeter. The required antiproton annihilation modes are selected by fast online processors using the tracking chamber and particle identification information. All the detectors are mounted in a 0.44 T uniform field of an axial solenoid of diameter 2 m and length 3.6 m to form a magnetic spectrometer capable o...

  14. Experiments at CERN in 1988

    International Nuclear Information System (INIS)

    This book is a compilation of the current experimental programme at CERN. The experiments listed are being performed at one of the following machines: The Super Proton Synchrotron (SPS), the Proton Synchrotron (PS) and the Synchro Cyclotron (SC). The four experiments planned for the Large Electron Positron machine (LEP) are also listed. The schematic layouts of beams and experimental areas at the different machines appear at the beginning of the report. The experiments are briefly described and a schematic layout of each apparatus is included together with lists of participants and institutions. The status of the experiments (preparation/data-taking/completed) corresponds to the situation at the end of 1988. The 'completed' status means that data-taking is finished, not necessarily the analysis of the results; this status is kept for two years and then the experiment is removed from the catalogue. A complete list of all the experiments published in these books since 1974 is given at the end. (orig./HSI)

  15. High Intensity Beam Issues in the CERN Proton Synchrotron

    CERN Document Server

    Aumon, Sandra; Rivkin, Leonid

    This PhD work is about limitations of high intensity proton beams observed in the CERN Proton Synchrotron (PS) and, in particular, about issues at injection and transition energies. With its 53 years, the CERN PS would have to operate beyond the limit of its performance to match the future requirements. Beam instabilities driven by transverse impedance and aperture restrictions are important issues for the operation and for the High-Luminosity LHC upgrade which foresees an intensity increase delivered by the injectors. The main subject of the thesis concerns the study of a fast transverse instability occurring at transition energy. The proton beams crossing this energy range are particularly sensitive to wake forces because of the slow synchrotron motion. This instability can cause a strong vertical emittance blow-up and severe losses in less than a synchrotron period. Experimental observations show that the particles at the peak density of the beam longitudinal distribution oscillate in the vertical plane du...

  16. 78 FR 55648 - Signal Booster Rules

    Science.gov (United States)

    2013-09-11

    ...), published at 78 FR 21555, April 11, 2013, are effective September 11, 2013. FOR FURTHER INFORMATION CONTACT... protect Customer Proprietary Network Information (CPNI). Privacy Act: The information collection... facilitate review of wireless providers' behavior regarding Consumer Signal Boosters, the R&O requires...

  17. Inspired by CERN

    CERN Multimedia

    2004-01-01

    Art students inspired by CERN will be returning to show their work 9 to 16 October in Building 500, outside the Auditorium. Seventeen art students from around Europe visited CERN last January for a week of introductions to particle physics and astrophysics, and discussions with CERN scientists about their projects. A CERN scientist "adopted"each artist so they could ask questions during and after the visit. Now the seeds planted during their visit have come to fruition in a show using many media and exploring varied concepts, such as how people experience the online world, the sheer scale of CERN's equipment, and the abstractness of the entities scientists are looking for. "The work is so varied, people are going to love some pieces and detest others," says Andrew Charalambous, the project coordinator from University College London who is also curating the exhibition. "It's contemporary modern art, and that's sometimes difficult to take in." For more information on this thought-provoking show, see: htt...

  18. CERN Phonebook evolution

    CERN Multimedia

    Sébastien Dellabella

    2012-01-01

    Consolidating phonebooks at CERN We have had many phonebooks in the past, Xwho (now decommissioned), the NICE phonebook on Windows PCs, and more recently the web site people.cern.ch. However, diversity doesn’t always equate to improved efficiency or quality. So in order to reduce the maintenance effort and to improve the user experience, we have consolidated these various phonebooks into a single web application: phonebook.cern.ch Motivations for change The NICE Phonebook was introduced in the year 2000 when Windows 95 was the major desktop platform. Since then, a lot has changed not only in technology and the desktop landscape but also in the variety of devices used to access the data (notably smartphones and tablets). Updating the NICE phonebook is slow. Once the master database is modified it can take up to two days for the data to propagate to the application. Thus, we are now planning the retirement of the NICE phonebook application. The new Phonebook.cern.ch The new phonebook.cern.ch...

  19. Lectures for CERN pensioners

    CERN Multimedia

    SC Unit

    2008-01-01

    The CERN Medical Service and the Pensioners Association are pleased to invite CERN pensioners to a series of lectures given by professors and specialists from the Teaching Hospitals and the Faculty of Medicine of the University of Geneva on the following topic: PROMOTION OF OPTIMUM BRAIN AGEING The lectures will take place in the Main CERN Auditorium (Building 60) from 2.30 p.m. to 4.30 p.m. on the following dates: Wednesday 12 November 2008: Assessing the extent of brain ageing Dr Dina ZEKRY Friday 12 December 2008: Can memory decline be prevented? Pr Jean-Pierre MICHEL Thursday 15 January 2009: Diagnosing and treating Alzheimer’s disease Pr Gabriel GOLD Wednesday 25 February 2009: What is the brain reserve? Speaker’s name to be announced at a later date The lectures will be given in French, with transparencies in English, and will be followed by a wide-ranging debate with the participants. CERN Medical Service - Pensioners Association - CERN-ESO (GAC-EPA)

  20. Apprenticeship at CERN

    CERN Multimedia

    Staff Association

    2016-01-01

    In 1961, based on the finding that the evolution of the labour market created a growing need for qualified staff, a first agreement between the Republic and Canton of Geneva and CERN was signed. One of the objectives of this agreement was the vocational training of young electronics and physics laboratory technicians. CERN, an important stakeholder in the local economy, highlighted with this agreement its willingness to participate in the local social and economic development. The first apprentice arrived at CERN in 1965. In 1971, the apprenticeship centre was created; it now hosts over twenty apprentices in total and welcomes about six new apprentices each year. These apprenticeships are for young people aged between 15 and 21 years, coming from one of the CERN Member States, and having completed their mandatory education, e.g. 11th grade in Switzerland or 3ème in France. The training is divided between working time at CERN and one or two days per week at school (CFPT in Geneva for electronics or ...

  1. Spaceflight participant visits CERN!

    CERN Multimedia

    Kathryn Coldham

    2016-01-01

    On 15 July, CERN welcomed spaceflight participant Anousheh Ansari.   Anousheh Ansari’s grin stretches from ear to ear, during an intriguing conversation with Nobel laureate Samuel C.C. Ting at AMS POCC. (Image: Maximilien Brice/CERN) Iranian-American Anousheh Ansari was the first-ever female spaceflight participant, spending eight days on the International Space Station (ISS) in 2006. She now has a new addition to her list of extraordinary sights ­– the home of the world’s largest particle accelerator: CERN.   On 15 July, Anousheh Ansari came to CERN and, unsurprisingly, visited the control room of the experiment attached to the ISS: the AMS. At the AMS Payload Operations Control Centre (AMS POCC) on CERN’s Prévessin site, she met the Nobel laureate Samuel Ting, spokesperson of the AMS experiment. Ansari and her accompanying guests were thrilled to expand their knowledge about CERN, its research and its...

  2. EU Commissioner visits CERN

    CERN Document Server

    2005-01-01

    European Commissioner Viviane Reding in front of one of the computers showing how the Grid works and, from left to right, Robert Aymar, CERN's Director-General, Wolfgang von Rüden, Head of the Information Technology Department, and Bob Jones, the newly appointed director of the EGEE project since 1st November. Viviane Reding, European Commissioner for Information Society and Media, visited CERN on 28 October. Accompanied throughout by CERN's Director-General, Robert Aymar, and the Head of the Information Technology Department, Wolfgang von Rüden, the Commissioner visited the ATLAS cavern before going on to the Information Technology Department, where she was given a complete overview of CERN's activities in the strategic field of Grid computing. Viviane Reding's visit coincided with the end of the EGEE (Enabling Grids for E-sciencE) conference, which took place in Pisa in Italy. Co-ordinated by CERN and funded by the European Commission, the EGEE project aims to set up a worldwide grid infrastructure for sc...

  3. CERN television news

    CERN Multimedia

    2002-01-01

    CERN events brought right to your desktop by the new video bulletin.   CERN now has its very own news broadcast , or rather 'webcast', with a host of special reports and even a star presenter. From today onwards, just go to the Bulletin's web page, click on the 'video news' link and sit back and enjoy the latest news about CERN, presented in images by Wendy Korda. The ten-minute newscast in both French and English, the Organization's two official languages, presents interviews, pictures of experiments and computer-generated graphics, bringing you right up to date with some of the Laboratory's latest stories. The show concludes with a selection of the best snapshots taken by the CERN Photo Lab. So every one or two months CERN's Audio-Video Service (ETT/DH) will be putting together a video news report that you can watch on your own desktop computer. Daniel Boileau, Patrick Gilbert de Vautibault and Jacques Fichet, the Service's three technicians, came up with the idea of producing this regular feat...

  4. CERN CAR STICKERS

    CERN Multimedia

    Service Accueil et Controle d'Accès; ST Division

    1999-01-01

    In accordance with Operational Circular n¡ 2, paragraph 21, CERN car stickers are to be renewed. The new stickers are now available and will be valid for a year.Youare therefore requested:either to obtain them from the distribution points for new stickers (see below); or to send us the application form below, duly completed, via the internal mail; or to complete the application form directly via the Web at the address: http://cern.ch/registration-stickers. Each vehicle has to carry a sticker and needs a separate application form.Vehicles bearing CERN diplomatic plates (CD07, 431K and CD series) do not need a sticker for access to the CERN areas.Thank you.List of distribution points:Registration Service (bldg 55 1st floor), open from 07h30 to 16h30. Building 33 (entrance hall), open from 08h00 to 18h00. Building 120 (ground floor), outside working hours.Name Surname CERN identification number Vehicle registration plates Country issuing the plates Vehicle ma...

  5. CERN Relay Race

    CERN Multimedia

    2009-01-01

    The CERN relay race, now in its 39th year, is already a well-known tradition, but this year the organizers say the event will have even more of a festival feeling. Just off the starting line of the CERN relay race.For the past few years, spectators and runners at the CERN relay race have been able to enjoy a beer while listening to music from the CERN music and jazz clubs. But this year the organizers are aiming for "even more of a festival atmosphere". As David Nisbet, President of the CERN running club and organizer of the relay race, says: "Work is not just about getting your head down and doing the theory, it’s also about enjoying the company of your colleagues." This year, on top of music from the Santa Luis Band and the Canettes Blues Band, there will be demonstrations from the Aikido and softball clubs, a stretching session by the Fitness club, as well as various stalls and of course, the well-earned beer from AGLUP, the B...

  6. Radiography at CERN

    CERN Multimedia

    HSE Unit

    2014-01-01

    What is industrial radiography? It is a non-destructive method with a wide variety of applications, such as inspecting the quality of a weld. It uses high-energy radioactive sources or an X-ray generator.   Is this inspection technique used at CERN? Yes, it is widely used at CERN by the EN-MME Group, which outsources the work to one or more companies, depending on the workload. Is it possible to carry out radiography anywhere at CERN? Yes, it is possible to carry out radiography in any building/accelerator/experiment area at CERN (including in areas which are not normally subject to radiological hazards). When is radiography carried out? It normally takes place outside of working hours (7 p.m. to 6 a.m.). How will I know if radiography is taking place in my building? If this activity is planned in a CERN building, notices will be affixed to all of its main entrance doors at least 24 hours in advance. What are the risks? There is a risk of exposure to very high levels of radiation, dep...

  7. PS: 10$^{13}$ ppp

    CERN Multimedia

    1975-01-01

    An intensity of 10$^{13}$ protons per pulse was reached in the proton synchrotron (PS) in a test run held on 10 December. This test was a repeat of the one held on 7 November (see December COURIER, p. 423), finishing the year with a new record and achieving the required intensity set out in the PS improvement programme.

  8. Pressure-Equalizing Cradle for Booster Rocket Mounting

    Science.gov (United States)

    Rutan, Elbert L. (Inventor)

    2015-01-01

    A launch system and method improve the launch efficiency of a booster rocket and payload. A launch aircraft atop which the booster rocket is mounted in a cradle, is flown or towed to an elevation at which the booster rocket is released. The cradle provides for reduced structural requirements for the booster rocket by including a compressible layer, that may be provided by a plurality of gas or liquid-filled flexible chambers. The compressible layer contacts the booster rocket along most of the length of the booster rocket to distribute applied pressure, nearly eliminating bending loads. Distributing the pressure eliminates point loading conditions and bending moments that would otherwise be generated in the booster rocket structure during carrying. The chambers may be balloons distributed in rows and columns within the cradle or cylindrical chambers extending along a length of the cradle. The cradle may include a manifold communicating gas between chambers.

  9. Dalai Lama at CERN

    International Nuclear Information System (INIS)

    On 30 August CERN turned aside from its usual day-to-day preoccupations when Director-General Herwig Schopper played host to the Dalai Lama of Tibet and his entourage during the holy man's 1983 visit to Europe. In welcoming his visitor, Professor Schopper stressed the role of particle physics in helping to understand man's place in the cosmos, and how the Dalai Lama's interest would further the interrelation of science, philosophy and religion. The Dalai Lama visited the UA 1 experiment (rolled back into its 'garage' during the present fixed target operations at CERN) and the large installations for the neutrino experiments in the West Area of the SPS machine. There was an intriguing exchange of views with CERN theorists, who described how science has continually modified our view of the world around us

  10. Safety alarms at CERN

    CERN Document Server

    Ninin, P; Henny, L

    1998-01-01

    In order to operate the CERN accelerators complex safely, the acquisition, transport and management of safety alarms is of crucial importance. The French regulatory authority [Direction de Sûreté des Installations Nucléaires de Base (INB)] defines them as Level 3 alarms; they represent as such a danger for the life and require an immediate intervention of the Fire Brigade. Safety alarms are generated by fire and flammable gas detection systems, electrical emergency stops, and other safety related systems. Level 3 alarms are transmitted for reliability reasons to their operation centre: the CERN Safety Control Room (SCR) using two different media: the hard-wired network and a computer based system. The hard-wired networks are connected to local panels summarizing in 34 security areas the overall CERN geography. The computer based system offers data management facilities such as alarm acquisition, distribution, archiving and information correlation. The Level 3 alarms system is in constant evolution in order...

  11. CERN's new safety policy

    CERN Multimedia

    2014-01-01

    The documents below, published on 29 September 2014 on the HSE website, together replace the document SAPOCO 42 as well as Safety Codes A1, A5, A9, A10, which are no longer in force. As from the publication date of these documents any reference made to the document SAPOCO 42 or to Safety Codes A1, A5, A9 and A10 in contractual documents or CERN rules and regulations shall be deemed to constitute a reference to the corresponding provisions of the documents listed below.   "The CERN Safety Policy" "Safety Regulation SR-SO - Responsibilities and organisational structure in matters of Safety at CERN" "General Safety Instruction GSI-SO-1 - Departmental Safety Officer (DSO)" "General Safety Instruction GSI-SO-2 - Territorial Safety Officer (TSO)" "General Safety Instruction GSI-SO-3 - Safety Linkperson (SLP)" "General Safety Instruction GSI-SO-4 - Large Experiment Group Leader In Matters of Safety (LEXGLI...

  12. CERN welcomes European science

    CERN Multimedia

    2002-01-01

    On 3 and 4 October CERN will host a special workshop for Marie Curie fellows. This programme is a key plank in the EU's strategy for creating a European research area.     With thousands of scientists from all over the continent working together, CERN is already an exemplary European science showcase. On 3 and 4 October, the Laboratory will contribute further to unifying all European science by hosting a special workshop for EU-funded Marie Curie fellows. This scheme gives young researchers from around the continent the mobility to go to wherever Europe's best facilities in their chosen field happen to be. The event that will take place at CERN, entitled 'Special workshop of Marie Curie Fellows on research and training in physics and technology', organised together with the European Commission, is a continuation of a series of workshops with the aim, among others, of promoting young researchers, supporting their training and mobility, and facilitating the interdisciplinary dissemination of knowledge. Dur...

  13. CERN UN Roundtable

    CERN Document Server

    CERN. Geneva; Del Rosso, Antonella; Gillies, James

    2014-01-01

    In the spirit of strengthening links and sharing best practices among the two Organizations, UNOG and CERN will be jointly organizing a round table discussion on the issue of “The challenge of communicating science and technology to the world: issues and solutions”. It is hoped that the discussions can highlight the experience of various organizations and institutions in their efforts to communicate and inform in several languages on topics – science and technology – that are often perceived as distant and arduous by the layman. ==>> Please note that registrations are now closed. It is not necessary to register for this event if you plan to watch it live on http://webcast.cern.ch. Send your questions to the speakers by email to: question@cern.ch

  14. CHOEUR DU CERN

    CERN Document Server

    CHOEUR DU CERN

    2010-01-01

    Les répétitions du chœur du CERN reprendront le mercredi 15 septembre à 20.00 heures à l’amphithéâtre principal – bâtiment 500. Au programme la préparation de notre concert de Noël avec la Missa Brevis, KV115, de Léopold Mozart et de la musique de Noël d’Europe. Les personnes qui aiment chanter, notamment des sopranes et des ténors, sont les bienvenues. Pour tout contact s’adresser à : Baudouin Bleus - (tél.CERN 767 82 44) -(baudouin.bleus@cern.ch) ou Martin Gatehouse ( martin.gatehouse@wanadoo.fr) ou Jean-Paul Diss (jean-pauldiss@wanadoo.fr).  

  15. CERN Relay Race

    CERN Multimedia

    2005-01-01

    The CERN Relay Race will take place around the Meyrin site on Wednesday 18 May between 12.15 and 12.35. This year, weather permitting, there will be some new attractions in the start/finish area on the field behind the Main Building. You will be able to: listen to music played by the CERN Jazz Club; buy drinks at the bar organised by the CERN Running Club; buy lunch served directly on the terrace by the restaurant Novae. ATTENTION: concerning traffic, the recommendations are the same as always: If possible, please avoid driving on the site during this 20 minute period. If you do meet runners in your car, please STOP until they all have passed. Thank you for your understanding.

  16. Cern Cricket Club

    CERN Multimedia

    Cern Cricket Club

    2014-01-01

      Cern Cricket Club The CERN Cricket Club 2014 season has started earlier than usual, with a game scheduled for the first time ever on Easter Sunday.  Due to repair work for the damage done to the ground because of the “Bosons&More” party at the end of September, all games until June have had to be scheduled away. Net practice, which normally takes place on the ground from mid-April, will not start until mid-June. The club is always looking for new players and newcomers will be made very welcome. Anyone who is interested in joining the club should sign up on our web site: http://cern.ch/Club-Cricket/    

  17. Kandinsky College Visits CERN

    CERN Document Server

    CERN Video productions; Angelos Alexopoulos

    2012-01-01

    This video documents the visit of nine senior high school students of the Kandinsky College in Nijmegen (Netherelands) to CERN. The students visited many of CERN's experimental facilities, took part in a Cloud Chamber workshop, attended talks and roundtable discussions of SpacePart12 and worked on the evaluation of the Microcosm exhibition as part of a school inquiry-based research project. The students and their teacher, Paul de Haas (a participant of the High School Teachers 2012 Programme at CERN) were connected with Prof. Christine Kourkoumelis and George Vasileiadis at the University of Athens and learned hands-on how to analyse real physics events, including Higgs-like ones, from the ATLAS experiment at the LHC using the HYPATIA Applet.

  18. Operational behaviour of CO{sub 2} booster systems; Betriebsverhalten von CO{sub 2}-Booster-Systemen

    Energy Technology Data Exchange (ETDEWEB)

    Javerschek, Oliver; Hieble, Tobias [BITZER Kuehlmaschinenbau GmbH, Sindelfingen (Germany)

    2011-07-01

    The operating characteristics of booster systems and the resulting operating conditions of CO{sub 2} booster systems in supermarket refrigeration are explained and discussed. Criteria and challenges of different operating and load conditions are gone into. Simulated and measured operating states of a small-scale booster system are compared and evaluated. [German] In der vorliegenden Veroeffentlichung werden unterschiedliche Betriebsverhalten und die daraus resultierenden Betriebsbedingungen von CO{sub 2}-Booster-Systemen in der Supermarktkaelte erlaeutert und diskutiert. Dabei werden wesentliche Kriterien und Herausforderungen bei den unterschiedlichen Betriebs- und Lastbedingungen besprochen. Ausserdem werden simulierte und gemessene Betriebszustaende einer kleinen Booster-Kaelteanlage vergleichend betrachtet und bewertet.

  19. Space Launch System Accelerated Booster Development Cycle

    Science.gov (United States)

    Arockiam, Nicole; Whittecar, William; Edwards, Stephen

    2012-01-01

    With the retirement of the Space Shuttle, NASA is seeking to reinvigorate the national space program and recapture the public s interest in human space exploration by developing missions to the Moon, near-earth asteroids, Lagrange points, Mars, and beyond. The would-be successor to the Space Shuttle, NASA s Constellation Program, planned to take humans back to the Moon by 2020, but due to budgetary constraints was cancelled in 2010 in search of a more "affordable, sustainable, and realistic" concept2. Following a number of studies, the much anticipated Space Launch System (SLS) was unveiled in September of 2011. The SLS core architecture consists of a cryogenic first stage with five Space Shuttle Main Engines (SSMEs), and a cryogenic second stage using a new J-2X engine3. The baseline configuration employs two 5-segment solid rocket boosters to achieve a 70 metric ton payload capability, but a new, more capable booster system will be required to attain the goal of 130 metric tons to orbit. To this end, NASA s Marshall Space Flight Center recently released a NASA Research Announcement (NRA) entitled "Space Launch System (SLS) Advanced Booster Engineering Demonstration and/or Risk Reduction." The increased emphasis on affordability is evident in the language used in the NRA, which is focused on risk reduction "leading to an affordable Advanced Booster that meets the evolved capabilities of SLS" and "enabling competition" to "enhance SLS affordability. The purpose of the work presented in this paper is to perform an independent assessment of the elements that make up an affordable and realistic path forward for the SLS booster system, utilizing advanced design methods and technology evaluation techniques. The goal is to identify elements that will enable a more sustainable development program by exploring the trade space of heavy lift booster systems and focusing on affordability, operability, and reliability at the system and subsystem levels5. For this study

  20. Poland at CERN

    CERN Multimedia

    CERN Press Office. Geneva

    2000-01-01

    On 17 October 2000, the second Polish industrial and technological exhibition opens at CERN*. The first one was held five years ago and nine of the companies that were present then have come back again this year. Six of those companies were awarded contracts with CERN in 1995. Three Polish officials were present at the Opening Ceremony today: Mrs Malgorzata Kozlowska, Under-secretary of State in the State Committee for Scientific Research, Mr Henryk Ogryczak, Under-secretary of State in Ministry of Economy and Prof. Jerzy Niewodniczanski, President of National Atomic Energy Agency.

  1. CERN Relay Race

    CERN Document Server

    2008-01-01

    The CERN relay race will take place around the Meyrin site on Thursday 5 June starting at 12:15 p.m. If possible, please avoid driving on the site during this 20-minute period. If you do meet runners while driving your car, please STOP until they have all passed. Thank you for your cooperation. Details on how to register your team for the relay race are given on the Staff Association Bulletin web site. You can access the online registration form at: http://cern.ch/club-running-relay/form.html

  2. The significance of Cern

    CERN Multimedia

    Weisskopf,V

    Le Prof. V.Weisskopf, DG du Cern de 1961 à 1965, est né à Vienne, a fait ses études à Göttingen et a une carrière académique particulièrement riche. Il a travaillé à Berlin, Copenhague et Berlin et est parti aux Etats Unis pour participer au projet Manhattan et était Prof. au MTT jusqu'à 1960. Revenu en Europe, il a été DG du Cern et lui a donné l'impulsion que l'on sait.

  3. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  4. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2009-01-01

    Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual session of this course will take place on 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  5. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced using Windows XP. The next bilingual sessions of this course will take place on December 12, 2008 and January 30, 2009. Register using our catalogue : http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

  6. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  7. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    Are you running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

  8. CERN Diversity Newsletter - November 2015

    CERN Document Server

    Kaltenhauser, Kristin; CERN. Geneva. HR Department

    2015-01-01

    Quarterly CERN Diversity Newsletter, informing on recent and ongoing diversity activities, and interesting reads, videos and other links related to diversity. Subscribe here: https://diversity.web.cern.ch/2015/07/subscribe-diversity-newsletter

  9. Le CERN chasse les neutrinos

    CERN Document Server

    2005-01-01

    CERN Scientists have just completed the construction of the "target chamber", essential link of the CNGS Project (CERN Neutrinos to Gran Sasso) intended for better understanding these mysterious particles , the neutrinos

  10. CERN firemen share their expertise

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    Firemen from local fire brigades have been coming to CERN to learn modern fire-fighting techniques. This apparatus allows the simulation of the spectacular backdraft phenomenon, so firemen training at CERN learn to understand it.

  11. Une flamme pour le CERN

    CERN Multimedia

    2004-01-01

    For the 50th anniversary of CERN, letters posted from Saint Genis will bear a postmark to celebrate CERN's anniversary. Envelopes are also available from the Saint-Genis-Pouilly (France) post office (3 paragraphs)

  12. CERN Diversity Newsletter - September 2016

    CERN Document Server

    Guinot, Genevieve

    2016-01-01

    Quarterly CERN Diversity Newsletter, informing on recent and ongoing diversity activities, and interesting reads, videos and other links related to diversity. Subscribe here: https://diversity.web.cern.ch/2015/07/subscribe-diversity-newsletter

  13. CERN Diversity Newsletter - March 2016

    CERN Document Server

    Kaltenhauser, Kristin; CERN. Geneva. HR Department

    2016-01-01

    Quarterly CERN Diversity Newsletter, informing on recent and ongoing diversity activities, and interesting reads, videos and other links related to diversity. Subscribe here: https://diversity.web.cern.ch/2015/07/subscribe-diversity-newsletter

  14. CERN 50th Anniversary : CERN's 50th anniversary celebrations drew to a close with a ceremony at Geneva University's Institut de Physique.

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    For it was here, on the banks of the River Arve, that CERN's first staff members, from the PS Magnets Group, came to work in October 1953. The ceremony was followed by drinks and an exhibition of the activities of the School of Physics.

  15. WILL I AM visits CERN

    CERN Multimedia

    Noemi Caraban

    2013-01-01

    Will.i.am visited CERN in December 2013, fulfilling a wish he made in a video-link appearance at TEDxCERN earlier that year http://tedxcern.web.cern.ch/video/choral-performance-reach-stars-william. During his visit, he was shown the Antimatter Decelerator, the underground ATLAS experiment cavern and the CERN Control Centre. He also took the opportunity to promote CERN’s beam line for schools competition.

  16. CERN Video News on line

    CERN Document Server

    2003-01-01

    The latest CERN video news is on line. In this issue : an interview with the Director General and reports on the new home for the DELPHI barrel and the CERN firemen's spectacular training programme. There's also a vintage video news clip from 1954. See: www.cern.ch/video or Bulletin web page

  17. The CERN fire-fighters

    CERN Multimedia

    CERN PhotoLab

    1959-01-01

    CERN is one of the few laboratories to have its own fire station. The CERN fire brigade was set up in July 1956 to provide a rapid response in the event of an accident and to tackle the risks specific to the Organisation's activities. Six members of the CERN fire brigade in 1959. From left to right: Messrs. Ubertin, Dalbignat, Verny, Vosdey, Lissajoux, Favre.

  18. CERN's future secured

    CERN Multimedia

    2003-01-01

    The CERN Council held its 123rd session on 13 December under the chairmanship of Professor Maurice Bourquin. The election of the next Director General, the Baseline Plan for 2003-2010 and a new status for non-European states were among the items agreed. In addition, the European Investment Bank has agreed a loan of 300 million EUR to complete the LHC.

  19. Satellite photo of CERN

    CERN Multimedia

    1991-01-01

    This photo from the Landsat5 orbital telescope shows the locations of CERN's Meyrin and Prevessin sites near Geneva on the Swiss-France border. The tunnels housing the LHC and SPS accelerators are also illustrated. Photo credit: US Geological Survey/photo by Jane Doe.

  20. CERN and space science

    CERN Multimedia

    2009-01-01

    The connection between CERN and space is tangible this week, as former CERN Fellow and ESA astronaut Christer Fuglesang begins the second week of his mission on space shuttle flight STS-128. I had the pleasure to meet Christer back in October 2008 at an IEEE symposium in Dresden, and he asked me whether we could give him something related to CERN for his official flight kit. We thought of caps and tee-shirts, but in the end decided to give him a neutralino as a symbol of the link between particle physics and the science of the Universe. Neutralinos are theoretical particles that the LHC will be looking for, and if they exist, they’re strong candidates for the Universe’s dark matter. Christer’s neutralino is just a model, of course, escaped from the particle zoo, but what better symbol of the connectedness of science? Christer Fuglesang is not the only link CERN has with the space shuttle programme. We’ve recently learned that...

  1. DESY greets CERN

    CERN Multimedia

    Helmut Dosch, Chairman of the DESY Board of Directors, continues the series of occasional exchanges between CERN and other laboratories world-wide. As part of this exchange, CERN Director-General Rolf Heuer wrote a message in DESY inForm. Helmut Dosch took over from Albrecht Wagner in March 2009. You may think that the connections between CERN and DESY are obvious – particle physics labs with record-breaking accelerators and users from all around the world trying to solve mankind’s great mysteries. We even exchanged a few Directors. But did you know that there are similarities that are much closer to home – for example that both labs have names for their staff in the host language that are untranslatable into English? You are CERNoises and CERNois, we are DESYanerinnen and DESYaner. And in the end it’s the people it all comes down to. We at DESY admire the resourcefulness, enthusiasm, dedication and perseverance with which you at CERN have designed, built, started ...

  2. CERN celebrates another milestone

    CERN Multimedia

    2007-01-01

    "CERN (the European Organization for Nuclear Research) recently celebrated the lowering of the gigantic toroid magnet end-cap, using an EOT crane, onto the cavern floor. After a two-hour operation, the installation teams from ATLAS, PH-ATI and TS could finally breath a sigh of relief." (1/2 page)

  3. A heatwave at CERN

    CERN Multimedia

    Anaïs Schaeffer

    2011-01-01

    It's getting hot in Buildings 201 and 860, over-heating even... But no reason to panic! We're talking about the superheated water boilers of CERN's two heating plants, which heat all the buildings on the Meyrin and Prévessin sites.   View of the three boilers and the control centre of the Meyrin heating plant. CERN's two heating plants each comprise three gas* boilers, with generators of 15 MW in the case of Meyrin and 5 MW in the case of Prévessin. Both inject pressurised water, superheated to 125 degrees, into several kilometres of pipes, 22 km on the Meyrin site and 5 km in Prévessin. "A single boiler is sufficient most of the time but a second kicks in automatically during very cold weather, and a third is there on stand-by," explains Christophe Martel, head of the GS Department section responsible for CERN's heating and air-conditioning systems. All of CERN's buildings have a sub-station that receives the superheated water from the boilers an...

  4. CERN fellows and visitors

    CERN Multimedia

    Penney, R. W.

    1963-01-01

    This article describes the Fellowship and Visitor Programme as it is at present, detailing the various headings under which the visitors come and indicating the methods by which they are chosen. The way in which their work is integrated into the general scientific activity of CERN is discussed briefly.

  5. CERN CROQUET CLUB

    CERN Multimedia

    Cern Croquet Club

    2015-01-01

    CERN CROQUET CLUB   Prévessin site Introduction to croquet, and barbecue, at the club from 18.00 on Thursday 30th April. Please Email norferga@orange.fr by 28th April if you are coming.  Please wear flat-soled shoes. Looking forward to seeing. Norman Eatough, President

  6. CERN-Russian meeting

    CERN Multimedia

    1974-01-01

    (front) V.P Dzhelepov (Dubna) (2nd row) A. Serov (State Committee), I.G. Morozov (Vice-Minister for Atomic Energy), V.S. Kaftanov (ITEP) (back) A. Derevschikov, R. Anthoine, V. Savrin, S. Nurushev, E. Gabathuler, M. Steuer (see CERN Courier of August 1974)

  7. CERN confirms LHC schedule

    CERN Multimedia

    2003-01-01

    The CERN Council held its 125th session under the chairmanship of Professor Maurice Bourquin. Highlights of the meeting included confirmation that the Large Hadron Collider (LHC) and its detectors are on schedule for a 2007 start-up, and that the LHC computing grid (LCG) project is about to reach a major milestone (1 page).

  8. CERN in detail

    CERN Multimedia

    Laëtitia Pedroso

    2010-01-01

    Before, you had to go on the TPG website to find a tram-route, use Google Maps to see an aerial photo of CERN, and look for CERN buildings on map.web.cern.ch. Now, that's ancient history, with a new Geographical Information System (GIS) Portal set up by the Design Office and Patrimony Service (GS/SEM/DOP).  It's a one-stop-shop for all this information and much more.   A screenshot of the GIS Portal. Over the past few days, you might have noticed the new interface called MAPSearch that pops up when you make a building search using the Building and Roads field on the CERN homepage. This is a simplified version of the new GIS web Portal, a project on which the GS Department's Design Office and Patrimony Service has been working since January 2010. "In today's informatics age, we need to respond ever more quickly to increasing numbers of specific user requests," explains Project Leader Youri Robert. This is more than just a new release of an old tool, it's a completely n...

  9. The CERN Accelerator School

    CERN Multimedia

    2016-01-01

    Introduction to accelerator physics The CERN Accelerator School: Introduction to Accelerator Physics, which should have taken place in Istanbul, Turkey, later this year has now been relocated to Budapest, Hungary.  Further details regarding the new hotel and dates will be made available as soon as possible on a new Indico site at the end of May.

  10. The CERN Accelerator School

    CERN Multimedia

    2016-01-01

      Introduction to accelerator physics This course will take place in Istanbul, Turkey, from 18 to 30 September 2016. It is now open for registration, and further information can be found here: http://cas.web.cern.ch/cas/Turkey-2016/Turkey-advert.html

  11. Cern Women's Club

    CERN Multimedia

    Club des cernoises

    2013-01-01

    Christmas SaleTuesday 26th November 2013, from 9:00 to 11:00 Main Building 60 Ground Floor Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch.

  12. CERN CAR CLUB

    CERN Multimedia

    Automobile club

    2009-01-01

    You are cordially invited to the next General Assembly of the CERN Car Club Tuesday 12 January 2010 at 5:45pm Bldg. 593 / room 11 As the end of 2009 is approaching, it is time to think about renewing your subscription. Therefore next time you are on the CERN-Meyrin site or at the Post Office counter don’t forget to fill in the payment slip to continue to be a part of our large family. The fee remains unchanged: 50 CHF. For those of you who are regular users of our equipment and who know of all the advantages that the club is in a position to offer, it seems pointless to give details, we are sure that many of you have made use of them and are satisfied. We remind you everyone working on CERN site is entitled to become a member of our club, this includes industrial support personnel and staff of companies which have a contract with CERN. If you are not yet a member, come and visit us! We will be happy to welcome you and show you the facilities, or you can visit our web site. The use of the club&...

  13. Cern Golf Club

    CERN Multimedia

    Cern Golf Club

    2014-01-01

      The Cern Golf Club   Members are here with invited to the: Annual General Meeting which takes place Wednesday evening the 5th February 2014 at 18h00 in the Conference room in bldg 13-2-005. A committee member will be at CERN gate B, 17h50 and accompany “external” CGC members to the conference room. Agenda: 1. President’s report 2. Treasurer’s report 3. Election of the Committee for 2014 4. Election of  Auditors 5. Draft schedule for 2014 CGC-competitions and other events 6. “Corpo” report    7. Proposals and any other business Please forward any proposals (to any of the committee members) you have, including candidature for the 2014 committee minimum three days in advance before the meeting.      Cern Golf Club   Les membres de club de golf de CERN sont invités à l’Assemblée Géné...

  14. CERN Housing Service: Hostel

    CERN Document Server

    CERN Housing Service

    2004-01-01

    Arrangements for the end of the year closure Hostel on the CERN site During the closure of CERN for Christmas and the New Year, the hostel will be closed from midday on Friday 17 December 2004 until Monday 3 January 2005 at 8:00. All accounts must be settled and room keys returned to the Reception before 10:00 on Friday 17 December 2004. Hostel in St. Genis-Pouilly The wing reserved for CERN will be closed from midday on Friday 17 December 2004 until Monday 3 January 2005 at 8:00. Anyone with no alternative but to stay in the Hostel during this period can be accommodated in another part of the building. The people concerned must make the appropriate reservations in person at the Reception of the St.-Genis Hostel, as far in advance as possible and in any case no later than Friday 10 December 2004. The total length of stay during the two weeks in question must be paid for in advance, no later than Friday10 December 2004. All reservations remaining unpaid after this date will be cancelled. Reception: CERN ...

  15. CERN in the blogosphere

    CERN Multimedia

    CERN Bulletin

    2011-01-01

    CERN communicates with the outside world in many different ways – websites, publications, through the media and via twitter to name but a few. As of January, CERN has a new way of engaging with the world: a CERN institutional blog.   CERN’s blog was launched on 10 January on the Quantum Diaries platform, adding a new strand to a well-established site. Quantum Diaries was launched in 2005 as an initiative for the World Year of Physics promoted by the InterAction collaboration, a group that brings together the communication offices of some of the world’s major particle physics labs and organisations. The launch of institutional blogs from Brookhaven, CERN, Fermilab and TRIUMF has added an extra dimension to Quantum Diaries. Visits to the site jumped to 3000 per day with the addition of the institutional blogs, and that number is already growing. CERN’s first post explains one of the reasons we’re doing this. With the incredible thirst for informati...

  16. CERN Women's club

    CERN Multimedia

    CERN Women's club

    2010-01-01

    The Welcome Center The Welcome Center website for CERN newcomers – and everyone else at CERN – has celebrated its first anniversary in operation. It began as a project to organize all the various information available at CERN into an easy to use site, with advice to help you make the most of your time here. It continues to be updated as new information becomes available. Lori Hakulinen and her helpers offer to meet with anyone who has questions. They can advise you on weekend activities, local restaurants and where to buy hard to find items or some of your favorite things from home, in addition to all of the practicalities you need to know, such as how to find housing or have a telephone installed, where to take language classes and much, much more. It’s all listed at: http://cern.ch/club-cwc-newcomers In general, meetings take place the first and third Thursdays in the month at Restaurant No. 1 in the Children’s Dining Room. (Please consult the Homepage for schedu...

  17. Muse at CERN

    CERN Multimedia

    CERN Bulletin

    2016-01-01

    On 19 July, the world-famous, English rock band, Muse, visited CERN before taking centre-stage at Nyon’s Paléo Festival. They toured some of CERN’s installations, including the Synchrocyclotron and the Microcosm exhibition, and also looked in on CMS and the Antimatter Factory.    

  18. Induced radioactivity at CERN

    CERN Multimedia

    1970-01-01

    A description of some of the problems and some of the advantages associated with the phenomenon of induced radioactivity at accelerator centres such as CERN. The author has worked in this field for several years and has recently written a book 'Induced Radioactivity' published by North-Holland.

  19. CERN Cricket Club

    CERN Multimedia

    Staff Association

    2014-01-01

    CERN CRICKET CLUB   The CERN Cricket Club 2014 season has been a good one so far with the team qualifying for the Swiss Cup semi-finals, with home advantage on the Prevessin ground on Sunday, August 24th. Their opponents will only be known the day before when the final game in the Eastern Division is played.  The CERN ground hasn’t quite recovered from the Bosons&More party last year, the wet weather making it impossible to roll the ground, but the new, wider strip is a big improvement. Net practice eventually started in late July, which is probably why the results at the beginning of the season weren’t so good. As match reports are too long to be included in the weekly bulletin, the full reports and the schedule can be found under “Matches (Fixtures, results, reports)” on the Cricket Club web site at http://cern.ch/Club-Cricket/    Anyone interested in playing cricket is welcome to join us at net practice, which takes pla...

  20. Commissaire Moulin visits CERN

    CERN Multimedia

    CERN Bulletin

    2014-01-01

    The French actor and film-maker Yves Rénier was shown around the Laboratory on Friday 6 June by friends at CERN.   Yves Rénier at LEIR. (Photo: Ludwig Pregernig) A keen diver and star of the long-running French television police drama Commissaire Moulin, Yves Rénier took advantage of a stopover in Geneva on his way to the Red Sea to meet up with his friends from the CERN Diving Club, who were only too pleased to take him on a tour of the Laboratory. In the morning, Yves Rénier visited the CERN Control Centre (CCC), Linac2 and LEIR. After lunch at the brasserie in Restaurant No. 2, the actor continued his tour with the CERN Computer Centre, the SM18 superconducting magnet test facility, and lastly the ATLAS experiment. “Thank you so much for showing me around and introducing me to a world I knew so little about,” confided Yves Rénier. “It’s fascinating to see so many scientists of different cultures,...

  1. CERN apprenticeship scheme honoured

    CERN Multimedia

    2008-01-01

    Prestigious awards for two apprentices who did their practical training at CERN. Sylvain Heinzen, apprentice physics lab technician at CERN, receiving his award from Pierre-François UNGER, State Councillor responsible for the Federal Department of the Economy and Health. The other award-winner, Cédric Gerber, is on the right of the photo.Among Geneva’s top apprentices who were honoured by the Fondation sociale de l’Union industrielle genevoise (UIG) on 28 October this year, were two CERN apprentices. Electronics technician Cédric Gerber and physics lab technician Sylvain Heinzen both did their four-year sandwich course at CERN, obtaining their professional qualification, the Certificat fédéral de capacité (CFC), in June. On top of that, Cédric Gerber, who had been a particularly outstanding apprentice, received two further distinctions at the CFC awards ceremony - the State Council prize for achieving one of the top-ten o...

  2. Improved safety at CERN

    CERN Multimedia

    2006-01-01

    As announced in Weekly Bulletin No. 43/2006, a new approach to the implementation of Safety at CERN has been decided, which required taking some managerial decisions. The guidelines of the new approach are described in the document 'New approach to Safety implementation at CERN', which also summarizes the main managerial decisions I have taken to strengthen compliance with the CERN Safety policy and Rules. To this end I have also reviewed the mandates of the Safety Commission and the Safety Policy Committee (SAPOCO). Some details of the document 'Safety Policy at CERN' (also known as SAPOCO42) have been modified accordingly; its essential principles, unchanged, remain the basis for the safety policy of the Organisation. I would also like to inform you that I have appointed Dr M. Bona as the new Head of the Safety Commission until 31.12.2008, and that I will proceed soon to the appointment of the members of the new Safety Policy Committee. All members of the personnel are deemed to have taken note of the d...

  3. CERN SHOP CHRISTMAS SALE

    CERN Multimedia

    Visits & Exhibition Service

    2000-01-01

    Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 12 to Thursday 14 December from 10.00 to 16.00.   Sweat-shirt col zippé, grey, blue, black (M, L, XL) 30.- Sweat-shirt col polo, grey, collar blue (M, L, XL) 30.- T-shirt, black, (M, L, XL) 15.- WWW T-shirt, white, bordeau (M, L, XL) 15.- CERN silk tie (3 colours) 33.- Fancy silk tie (blue, bordeau 25.- Silk scarf (blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- New model of CERN watch 25.- New CERN baseball cap 10.- Antimatter (English/anglais) 30.- The Search for Infinity (French, Italian, English,) 35.- Auf der Suche nach dem Unendlichen 45.- If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs (Shop will be closed at 12.00 on 22.12.).

  4. Bhutan at CERN

    CERN Document Server

    2002-01-01

    On Tuesday 12 March, CERN received an extraordinary visitor, a very great representative of a very tiny country. His Royal Highness, Dasho Jigme Khesar Namgyal Wangchuk, Crown Prince of Bhutan, visited the assembly site of CMS. For those whose geographical knowledge is weak, Bhutan is a tiny bhuddist kingdom, nestled in the Himalayas and surrounded by two giants, India and China.

  5. Tragic loss at CERN

    CERN Multimedia

    CERN Ski Club

    2015-01-01

    Tragic loss at CERN The CERN community is mourning the tragic loss of two members of the CERN Ski Club. On Sunday, April 12, an avalanche buried four out of five skiers, taking part in a ski touring in the region of the Becs de Bosson in Valais (CH). The fifth skier, who had not been buried in the snow,  courageously managed to save two of the skiers, but Hervé Milcent, 49 years, federal ski instructor, and Mattieu Cattin, 33 years, were buried under two to three meters of snow, far down the avalanche slope, and did not survive, despite the fast arrival of the mountain rescue. In its 40 years of existence, the CERN Ski Club, one of the biggest in the Geneva area, has never been confronted with such a tragedy. The passing of Hervé and Matthieu has deeply shocked and saddened all volunteers of the Club as well as the entire alpine community. The ski touring section of the club would like to honour its friend Hervé, who joined the club in 1998. In 2003 he became res...

  6. CERN's Guardian Angels

    CERN Multimedia

    2002-01-01

    Any trouble at CERN? The Technical Control Room operates the entire technical infrastructure of CERN every day, all year long. They deal with problems that go from simple water leaks to devastating power cuts.   The Technical Control Room with Kenneth Olesen and Mark Harvey, minutes before their starting time. This big room is probably the liveliest at CERN, since there's always someone there, everyday, all year long. Laurent Randot and Eric Lienard working in the Technical Control Room at CERN in building 212. They've started at 7 a.m. and today has been a relatively quiet day. There have been some microcuts in the electric net because of the wind. But these have been repaired rather quickly... The relief: It's 2.30 p.m. Time for Laurent Randot and Eric Lienard to show their colleagues Mark Harvey and Kenneth Olesen what has been going on during the morning. They are the next TCR team of the day. Mark Harvey and Kenneth Olesen start their working day. They will work until 11p.m., when another team wil...

  7. Women at CERN

    CERN Multimedia

    2004-01-01

    To mark International Women's Day on 8 March, the Weekly Bulletin has looked at the careers of six female physicists, engineers and administrators working at CERN. A frequent question on the lips of newcomers to CERN as they take a quick look around them is 'But where are the women?' However, while it's true that the Laboratory has never had a huge number of female personnel, a closer look reveals that there are in fact quite a few around. To mark International Women's Day, the Bulletin has interviewed six women working at CERN to find out how they see the Organization, what they do and what they think about their daily working lives. Creating a link 'Maybe because I grew up during World War II, my parents always taught me to respect people of other nationalities, religions, colour, etc., so one thing I have always appreciated about CERN is that it promotes this tolerance and understanding by giving us the great privilege of working side by side with colleagues from many cultures and walks of life.' Pegg...

  8. Give blood at CERN

    CERN Multimedia

    SC Unit

    2008-01-01

    ACCIDENTS and ILLNESSES don’t take a break! DO SOMETHING AMAZING - GIVE BLOOD! IT’S IN ALL OUR INTERESTS. 30 July 2008 from 9.30 a.m. to 4 p.m. CERN RESTAURANT NOVAE First floor - Salle des Pas Perdus After you have given blood, you are invited to partake of refreshments kindly offered by NOVAE.

  9. Development of Cogging at the Fermilab Booster

    Energy Technology Data Exchange (ETDEWEB)

    Seiya, K. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Chaurize, S. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Drennan, C. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Pellico, W. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Triplett, A. K. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Waller, A. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2015-01-30

    The development of magnetic cogging is part of the Fermilab Booster upgrade within the Proton Improvement Plan (PIP). The Booster is going to send 2.25E17 protons/hour which is almost double the present flux, 1.4E17 protons/hour to the Main Injector (MI) and Recycler (RR). The extraction kicker gap has to synchronize to the MI and RR injection bucket in order to avoid a beam loss at the rising edge of the extraction and injection kickers. Magnetic cogging is able to control the revolution frequency and the position of the gap using the magnetic field from dipole correctors while radial position feedback keeps the beam at the central orbit. The new cogging is expected to reduce beam loss due to the orbit changes and reduce beam energy loss when the gap is created. The progress of the magnetic cogging system development is going to be discussed in this paper.

  10. Tracking study of hadron collider boosters

    Energy Technology Data Exchange (ETDEWEB)

    Machida, S.; Bourianoff, G.; Huang, Y.; Mahale, N.

    1992-07-01

    A simulation code SIMPSONS (previously called 6D-TEASE T) of single- and multi-particle tracking has been developed for proton synchrotrons. The 6D phase space coordinates are calculated each time step including acceleration with an arbitrary ramping curve by integration of the rf phase. Space-charge effects are modelled by means of the Particle In Cell (PIC) method. We observed the transverse emittance growth around the injection energy of the Low Energy Booster (LEB) of the Superconducting Super Collider (SSC) with and without second harmonic rf cavities which reduce peak line density. We also employed the code to see the possible transverse emittance deterioration around the transition energy in the Medium Energy Booster (MEB) and to estimate the emittance dilution due to an injection error of the MEB.

  11. Fuel gas boosters in developing nations

    Energy Technology Data Exchange (ETDEWEB)

    Sumbles, Billy [VALERUS, Ahmadabad (India). South East Asia Regional; Paris, Mike [VALERUS, Houston, TX (United States)

    2008-07-01

    Regulations requiring the use of natural gas, as opposed to flaring, and the need for clean generation solutions are driving global demand for gas-fired generation and corresponding fuel gas booster stations. Gas-producing nations are looking for viable solutions to be able to capture and use natural gas. And nations in the Middle East, Asia and Europe are developing a gas infrastructure similar to the U.S. Gas transported across long distances in pipelines often requires compression to boost pressure and meet industrial needs. In many cases, the gas may need to be processed before it can be used. However, end-users cannot just order gas booster stations out of a catalogue. Several factors - such as turbine operation, gas quality, compression pressure requirements, and the extent of processing required - need to be considered before designing and installing such systems. (author)

  12. LMFBR with booster pump in pumping loop

    Science.gov (United States)

    Rubinstein, H.J.

    1975-10-14

    A loop coolant circulation system is described for a liquid metal fast breeder reactor (LMFBR) utilizing a low head, high specific speed booster pump in the hot leg of the coolant loop with the main pump located in the cold leg of the loop, thereby providing the advantages of operating the main pump in the hot leg with the reliability of cold leg pump operation.

  13. SNS RING STUDY AT THE AGS BOOSTER.

    Energy Technology Data Exchange (ETDEWEB)

    ZHANG, S.Y.; AHRENS, L.; BEEBE-WANG, J.; BLASKIEWICZ, M.; FEDOTOV, A.; GARDNER, C.; LEE, Y.Y.; LUCCIO, A.; MALITSKY, N.; ROSER, T.; WENG, W.T.; WEI, J.; ZENO, K.; REECE, K.; WANG, J.G.

    2000-06-30

    During the g-2 run at the BNL AGS in early 2000, a 200 MeV storage-ring-like magnetic cycle has been set-up and tuned at the Booster in preparing for the Spallation Neutron Source (SNS) accumulator ring study. In this article, we report the progress of the machine set-up, tuning, some preliminary studies, and the future plan.

  14. CERN HEALTH INSURANCE SCHEME (CHIS)

    CERN Multimedia

    HR Department

    2002-01-01

    List of benefits for 2002 The CHIS list of benefits for 2002 is now available from the HR Division Website (under 'general information'). We wish to draw your attention to the fact that the copies of this list available at the CERN UNIQA Office are intended ONLY for CERN pensioners. CERN staff members are therefore kindly requested to print this list themselves from the Web. English version HERE We would like to take this opportunity to remind staff members that they should obtain medical expenses claim forms from their divisional secretariat and NOT from the CERN UNIQA Office, which has a limited supply intended for CERN pensioners ONLY. Human Resources Division Tel: 73635

  15. CERN & Society launches donation portal

    CERN Multimedia

    Cian O'Luanaigh

    2014-01-01

    The CERN & Society programme brings together projects in the areas of education and outreach, innovation and knowledge exchange, and culture and arts, that spread the CERN spirit of scientific curiosity for the inspiration and benefit of society. Today, CERN & Society is launching its "giving" website – a portal to allow donors to contribute to various projects and forge new relationships with CERN.   "The CERN & Society initiative in its embryonic form began almost three years ago, with the feeling that the laboratory could play a bigger role for the benefit of society," says Matteo Castoldi, Head of the CERN Development Office, who, with his team, is seeking supporters and ambassadors for the CERN & Society initiative. "The concept is not completely new – in some sense it is embedded in CERN’s DNA, as the laboratory helps society by creating knowledge and new technologies – but we would like to d...

  16. John Adams and CERN: Personal Recollections

    CERN Document Server

    Brianti, Giorgio

    2013-01-01

    By any standards, John Adams had a most remarkable career. He was involved in three important, emerging technologies, radar, particle accelerators and controlled fusion, and had an outstanding impact on the last two. Without a university education, he attained hierarchical positions of the highest level in prestigious national and international organizations. This article covers the CERN part of his career, by offering some personal insights into the different facets of his contributions to major accelerator projects, from the first strong-focusing synchrotron, the PS, to the SPS and its conversion to a proton–antiproton collider. In particular, it outlines his abilities as a leader of an international collaboration, which has served as an example for international initiatives in other disciplines.

  17. The CERN accelerators controls convergence project

    CERN Document Server

    Van den Eynden, Marc

    1999-01-01

    Summary form only given. The CERN PS and SL Accelerators controls groups have started in March 1998 a convergence effort aimed at building a common controls infrastructure for year 2001. The first activities concentrated on the definition of an object oriented Accelerator Device Model and Application Programming Interface (API) aimed at offering to high level application software developers a narrow and coherent view of the accelerator components. Efforts have also started to build the underlying middleware architecture that will support this model, including services based on the publish- subscribe paradigm. This presentation will highlight some aspects of this Accelerator Device model as seen form the application software level. A logical view of the associated middleware architecture that will transport Accelerator device data will also be discussed.

  18. ERC rewards CERN researchers

    CERN Multimedia

    Rosaria Marraffino

    2015-01-01

    The European Research Council (ERC) has awarded starting grants to Magdalena Kowalska, a member of the ISOLDE physics team, and Claude Duhr, CERN Theory Division. The funding will enable them to build their own research teams at CERN, engaging postdocs and PhD students.   Magdalena Kowalska and Claude Duhr. The ERC fosters scientific excellence in Europe through competitive funding. Its grants are awarded to projects headed by researchers – both beginning-of-career and established – via an open, peer-reviewed competition. In December 2014, Magdalena Kowalska and Claude Duhr were awarded grants to pursue research in ultra-sensitive nuclear magnetic resonance (NMR) in liquids and mathematical structures in scattering amplitudes, respectively. “Our research project aims to apply an ultra-sensitive NMR technique using radioisotopes to liquids in order to study the interaction of metal ions with biological molecules such as proteins, DNA or RNA,” says Mag...

  19. Ombud's Corner: Respect @ CERN

    CERN Multimedia

    Sudeshna Datta-Cockerill

    2014-01-01

    Since 2010 CERN has been a member of the Geneva-based association "Le respect, ça change la vie". Four years later and in conjunction with CERN’s celebration of its 60 years of ‘science for peace’, it is time to launch a new respectful workplace awareness campaign under the auspices of the Ombud.   Mutual respect is a basic pillar of peace. At CERN, we pride ourselves on our history, which started when a handful of Europe’s visionary scientists saw the opportunity that an international laboratory for fundamental research would present in bringing nations together. That idea has worked very well and, today, our success can be measured not only in terms of unprecedented scientific achievements but also in terms of training and education, and exemplary collaboration across borders, cultures and an extensive range of differences. In order for history to continue along these positive lines, and coming back to the awareness campai...

  20. CERN MicroClub

    CERN Multimedia

    CERN MicroClub

    2016-01-01

    Le CERN Micro Club (en partenariat avec Google Education et EU Code Week) organise un évènement éducatif exceptionnel autour de trois kits scientifiques basés sur le mini-ordinateur Raspberry Pi : Le Bras Robotique "Poppy Ergo Jr", conçu par l'équipe-projet Flowers (Centre de recherche Inria Bordeaux Sud-Ouest, ENSTA Paris Tech). Le kit de détection de rayons cosmiques "Muon Hunter", conçu en partenariat entre Mr Mihaly Vadai et les membres du CERN Micro Club. La voiture radio-commandée programmable Wifi "GianoPi", conçue en partenariat avec le campus "La Chataigneraie", pour l'Ecole Internationale de Genève.   Le vendredi 7 octobre (de 18h à 20h) : Une conférence gratuite et ouverte à tous (limitée à 100 personnes), pendant laquelle v...

  1. Italy at CERN

    CERN Multimedia

    Caroline Laignel

    2005-01-01

    15 - 17 November 2005 Main Building Bldg 60 - ground and 1st floor 09:00 - 17:30 Twenty-six companies will present their latest technology at the "Italy at CERN" exhibition. Italian industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: electrical engineering, electronics, logistics, mechanical engineering, vacuum and low-temperature technology.   The exhibition is being organised by the INFN in Padua. The exhibitors are listed below.   A detailed programme will be available in due course : from your Departmental secretariat, at the exhibition, on the FI homepage http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS  Ansaldo Superconduttori Spa CAEN Spa CECOM Snc Consorzio Canavese Export CPE Italia Spa Criotec Impianti Srl CTE Sistemi Srl Carpenteria S. Antonio Spa E.E.I. Equipaggiamenti Elettronici Industriali Elettronica Conduttori Srl Goma Elettronica Spa ICAR Spa Intercond Spa Keno...

  2. ITALY AT CERN

    CERN Multimedia

    23 - 26 June 2003 Main Building Bldg 60 - ground and 1st floor 09.00 hrs - 17.30 hrs Twenty-four companies will present their latest technology at the "Italy at CERN" exhibition. The Italian industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: cryogenics and vacuum technologies, electric power and power electronics, mechanical components, small and precision machined mechanical components, engineering, industrial plants, industrial machinery, automation, telecommunication, instrumentation, data processing and electronics. The exhibition is being organised by the INFN of Padova. There follows : - the list of exhibitors. A detailed programme will be available in due course at : - your Divisional secretariat, - the exhibition, - on the SPL homepage http://spl-div.web.cern.ch/spl-div/member_states/exhibitions_visits.htm LIST OF EXHIBITORS 1 Aerimpianti Spa13 Europa Metalli - LMI spa 2 AERSAT Spa14 FBM ICOSS srl 3 Andalo' Gianni Srl15 Finsys...

  3. ITALY AT CERN

    CERN Multimedia

    2003-01-01

    23 - 26 June 2003 Main Building Bldg 60 - ground and 1st floor 09.30 hrs - 17.30 hrs Twenty-four companies will present their latest technology at the "Italy at CERN" exhibition. The Italian industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: cryogenics and vacuum technologies, electric power and power electronics, mechanical components, small and precision machined mechanical components, engineering, industrial plants, industrial machinery, automation, telecommunication, instrumentation, data processing and electronics. The exhibition is being organised by the INFN of Padova. There follows: - the list of exhibitors. A detailed programme will be available in due course: - from your Divisional secretariat, - at the exhibition, - on the SPL homepage http://spl-div.web.cern.ch/spl-div/member_states/exhibitions_visits.htm LISTE DES EXPOSANTS / LIST OF EXHIBITORS 1 Aerimpianti Spa13 Europa Metalli - LMI spa 2 AERSAT Spa14 FBM ICOSS srl 3 Anda...

  4. Monitoring Evolution at CERN

    CERN Document Server

    Andrade, P; Murphy, S; Pigueiras, L; Santos, M

    2015-01-01

    Over the past two years, the operation of the CERN Data Centres went through significant changes with the introduction of new mechanisms for hardware procurement, new services for cloud provisioning and configuration management, among other improvements. These changes resulted in an increase of resources being operated in a more dynamic environment. Today, the CERN Data Centres provide over 11000 multi-core processor servers, 130 PB disk servers, 100 PB tape robots, and 150 high performance tape drives. To cope with these developments, an evolution of the data centre monitoring tools was also required. This modernisation was based on a number of guiding rules: sustain the increase of resources, adapt to the new dynamic nature of the data centres, make monitoring data easier to share, give more flexibility to Service Managers on how they publish and consume monitoring metrics and logs, establish a common repository of monitoring data, optimise the handling of monitoring notifications, and replace the previous ...

  5. Germany at CERN

    CERN Multimedia

    C. Laignel / FI-DI

    2005-01-01

    From 1 to 3 march 2005 Administration Building Bldg 60/61 - ground and 1st floor 09:30 - 17:30 Twenty eight companies will present their latest technology at the "Germany at CERN" exhibition. German industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: mechanical engineering, particle detectors, electrical engineering, electronics, data processing, radiation protection and vacuum and low temperature techonology. The exhibition is organised by the Federal Minister of Education and Research (BMBF), Bonn. There follows: the list of exhibitors A detailed programme will be available in due course at : your Departemental secretariat, the reception information desk, Building 33, the exhibition. A detailed list of firms is available under the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS ACCEL Instruments GmbH APRA-NORM Elektromechanik GmbH BABCOCK NOELL Nucle...

  6. Germany AT CERN

    CERN Multimedia

    2005-01-01

    From 1 to 2 March 2005 Administration Building Bldg 60/61 - ground and 1st floor 09:30 - 17:30 Twenty nine companies will present their latest technology at the "Germany at CERN" exhibition. German industry will exhibit products and technologies related to the field of particle physics. The main sectors represented will be: mechanical engineering, particle detectors, electrical engineering, electronics, data processing, radiation protection and vacuum and low temperature techonology. The exhibition is organised by the Federal Ministry of Education and Research (BMBF), Bonn. The exhibitors are listed below. A detailed programme will be available in due course: from your Departemental secretariat, from the reception information desk, Building 33, at the exhibition itself. A detailed list of the participating firms is already available at the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS ACCEL Instruments GmbH APRA-NORM Elekt...

  7. CERN School of Computing

    CERN Multimedia

    2007-01-01

    The 2007 CERN School of Computing, organised by CERN in collaboration with the University of Split (FESB) will be held from 20 to 31 August 2007 in Dubrovnik, Croatia. It is aimed at postgraduate students and research workers with a few years' experience in scientific physics, computing or related fields. Special themes this year are: GRID Technologies: The Grid track delivers unique theoretical and hands-on education on some of the most advanced GRID topics; Software Technologies: The Software track addresses some of the most relevant modern techniques and tools for large scale distributed software development and handling as well as for computer security; Physics Computing: The Physics Computing track focuses on informatics topics specific to the HEP community. After setting-the-scene lectures, it addresses data acquisition and ROOT. Grants from the European Union Framework Programme 6 (FP6) are available to participants to cover part or all of the cost of the School. More information can be found at...

  8. Germany AT CERN

    CERN Multimedia

    C. Laignel / FI-DI

    2005-01-01

    From 1 to 3 march 2005 Administration Building Bldg 60/61 - ground and 1st floor 09:30 - 17:30 Twenty nine companies will present their latest technology at the "Germany at CERN" exhibition. German industry will exhibit products and technologies related to the field of particle physics. The main sectors represented will be: mechanical engineering, particle detectors, electrical engineering, electronics, data processing, radiation protection and vacuum and low temperature techonology. The exhibition is organised by the Federal Minister of Education and Research (BMBF), Bonn. The exhibitors are listed below. A detailed programme will be available in due course: from your Departemental secretariat, from the reception information desk, Building 33, at the exhibition itself. A detailed list of the participating firms is already available at the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS ACCEL Instruments GmbH APRA-NORM Elekt...

  9. France at CERN

    CERN Multimedia

    2005-01-01

    From 04 to 06 october 2005 Administration Building Bldg 60/61 - ground and 1st floor 09:00 - 17:30   Thirty-two companies will present their latest technology at the "France at CERN" exhibition. French industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: mechanical engineering, electrical engineering, electronics, data processing, various supplies, civil engineering and buildings, and vacuum and low temperature technology. The exhibition is organised by UBIFRANCE, the French Committee for Trade Events Abroad.  You will find below : the list of exhibitors.   A detailed programme will be available in due course at : your Departmental secretariat, the reception information desk, Building 33, the exhibition itself.   A detailed list of the firms involved is already available under the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm     LIST OF EXHIBITORS AIR LIQUIDE DTA ALSTOM...

  10. France at CERN

    CERN Multimedia

    2005-01-01

    From 04 to 06 october 2005 Administration Building Bldg 60/61 - ground and 1st floor 09:00 - 17:30   Thirty-two companies will present their latest technology at the "France at CERN" exhibition. French industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: mechanical engineering, electrical engineering, electronics, data processing, various supplies, civil engineering and buildings, and vacuum and low temperature technology. The exhibition is organised by UBIFRANCE, the French Committee for Trade Events Abroad.  You will find below : the list of exhibitors.   A detailed programme will be available in due course at : your Departmental secretariat, the reception information desk, Building 33, the exhibition itself.   A detailed list of the firms involved is already available under the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm     LIST OF EXHIBITORS AIR LIQUIDE DTA ALSTO...

  11. CERN Heart Days

    CERN Multimedia

    2003-01-01

    14 & 15 OCTOBER 2003 The Medical Service and the Fire Brigade invite everyone working at CERN to participate in the above event. INFIRMARY 9 am to 16.30 pm Building 57, ground floor No need to book HEALTHY HEART? Evaluation of personal cardiac risks through the monitoring of: Blood pressure Cholesterol and sugar levels Body Mass Index ... and more Leaflets, information and advice concerning cardiac issues FIRE BRIGADE 9 to 12am - Building 65 Please book (limited to 15 people/day) FIRST AID COURSES What to do in a Cardiac Emergency (3 h. duration) Places are limited and on reservation only (15 people/day). To book, e-mail the Medical Services on: service.medical@cern.ch

  12. CERN Heart Days

    CERN Multimedia

    2003-01-01

    14 & 15 OCTOBER 2003 The Medical Service and the Fire Brigade invite everyone working at CERN to participate in the above event. INFIRMARY 9 am to 16.30 pm Building 57, ground floor HEALTHY HEART? ♥ Evaluation of personal cardiac risks through the monitoring of: • Blood pressure • Cholesterol and sugar levels • Body Mass Index ... and more ♥ Leaflets, information and advice concerning cardiac issues FIRE BRIGADE 9 to 12am Building 65 FIRST AID COURSES ♥ What to do in a Cardiac Emergency (3 h duration) Places are limited and on reservation only (15 people / day) To book, E-mail the Medical Services on: service.medical@cern.ch

  13. CERN Heart Days

    CERN Multimedia

    2003-01-01

    14 & 15 OCTOBER 2003 The Medical Service and the Fire Brigade invite everyone working at CERN to participate in the above event. INFIRMARY 9 am to 16.30 pm Building 57, ground floor no need to book HEALTHY HEART? • Evaluation of personal cardiac risks through the monitoring of: Blood pressure Cholesterol and sugar levels Body Mass Index ... and more • Leaflets, information and advice concerning cardiac issues FIRE BRIGADE 9 to 12 am - Building 65 Please book (limited to 15 people/day) FIRST AID COURSES • What to do in a Cardiac Emergency (3 h. duration) Places are limited and on reservation only (15 people/day). To book, e-mail the Medical Services on: service.medical@cern.ch

  14. Great Britain at CERN

    CERN Multimedia

    2006-01-01

    From 14 to 16 November 2006 Administration Building, Bldg. 60/61 - ground and 1st floor 09.30 - 17.30 Fifteen companies will present their latest technologies at the 'Great Britain at CERN' exhibition. British industry will exhibit products and technologies related to the field of particle physics. The main fields represented will be computing technologies, electrical engineering, electronics, mechanical engineering, vacuum & low temperature technologies and particle detectors. The exhibition is organised by BEAMA Exhibitions (the British Electrotechnical and Allied Manufacturers Association). Below you will find: a list of the exhibitors. A detailed programme will be available in due course: from your Departmental secretariat, from the Reception information desk, Building 33, at the exhibition itself. A detailed list of the companies is available at the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS 3D Metrics Almat...

  15. Great Britain at CERN

    CERN Multimedia

    2006-01-01

    From 14 to 16 November 2006 Administration Building, Bldg. 60/61 - ground and 1st floor 09.30 - 17.30 Fifteen companies will present their latest technologies at the 'Great Britain at CERN' exhibition. British industry will exhibit products and technologies related to the field of particle physics. The main fields represented will be computing technologies, electrical engineering, electronics, mechanical engineering, vacuum & low temperature technologies and particle detectors. The exhibition is organised by BEAMA Exhibitions (the British Electrotechnical and Allied Manufacturers Association). Below you will find: a list of the exhibitors. A detailed programme will be available in due course: from your Departmental secretariat, from the Reception information desk, Building 33, at the exhibition itself. A detailed list of the companies is available at the following FI link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS 3D Metrics Alma...

  16. CERN Courier goes digital

    CERN Multimedia

    Christine Sutton, CERN Courier editor

    2013-01-01

    The January/February 2013 issue of the CERN Courier offers a new way to access the content – the first digital edition of the magazine.   The CERN Courier dates back to August 1959, when the first issue appeared, consisting of 8 black-and-white pages. Since then it has seen many changes in design and layout, leading to the current full-colour editions of more than 50 pages on average. It went on the web for the first time in October 1998, when IOP Publishing took over the production work. Now, we have taken another step forward with a digital edition that provides yet another means to access the content beyond the web and print editions, which continue as before. To download the digital edition, click here. To sign up to the new issue alert, please visit: http://cerncourier.com/cws/sign-up.

  17. CERN Pension Fund move

    CERN Document Server

    HR Department

    2007-01-01

    The CERN Pension Fund has moved to new offices on the 5th floor of Building 5. The Benefits Service of the Fund is now located in Offices 5-5-017 - 5-5-021 - 5-5-023. We remind you that the office hours are: Tuesday/Wednesday/Thursday from 10 am to 12 am and from 3 pm to 5 pm. The Fund would like to take this opportunity to warmly thank all the persons involved in the relocation.

  18. CERN access cards

    CERN Multimedia

    HR Department

    2007-01-01

    Holders of CERN access cards are reminded that the card is an official document. It is important to carry it with you at all times when you are on the site. This applies also to those on standby duty who are called out for emergency interventions. As announced in Weekly Bulletin 13/2006, any loss or theft of access cards must be declared to the competent external authorities.

  19. Cern Women's Club

    CERN Multimedia

    Club des Cernoises

    2011-01-01

    Coffee Morning Tuesday 8th November 2011, 9:00 - 11:00 Bldg 504 (Restaurant No 2 - DSR) 1st Floor, Club Room 3 Organization of our Christmas Sale In favour of “Terre des Hommes” Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch/Club-WomensClub/

  20. CERN Women's Club

    CERN Multimedia

    Club des cernoises

    2011-01-01

    Coffee Morning Tuesday 11th October, 9:00 – 11:00 Bldg 504 (Restaurant No 2) 1st Floor, Club Room 3 Presentation of the charity to benefit from the Christmas Sale TERRE DES HOMMES New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch/Club-WomensClub/

  1. CERN Women's Club

    CERN Multimedia

    CERN Women's Club

    2011-01-01

    Coffee Morning Tuesday 10th January 2012, 9:00 – 11:00 Bldg 504 (Restaurant No 2 – DSR) 1st Floor, Club Room 3 Epiphany (French tradition – “Tirer les rois”) Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch/Club-WomensClub/

  2. Les outils du CERN

    CERN Multimedia

    1999-01-01

    C'est le plus grand centre mondial de recherche en physique des particules. Les outils du Laboratoire, accélérateurs et détecteurs de particules, figurent parmi les instruments scientifiques les plus complexes au monde. Des prix Nobels ont d'ailleurs été attribués aux physiciens du CERN pour leurs développements.

  3. CERN Women's Club

    CERN Multimedia

    Club des Cernoises

    2013-01-01

    Coffee Morning Tuesday 11th  June 2013, 12:30 Annual Club Lunch at the restaurant “Bois Joly” in Crozet Those interested in helping should come along. New arrivals and all members are cordially invited.You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch/Club-WomensClub/

  4. Cern Women's Club

    CERN Multimedia

    Club des cernoises

    2013-01-01

    Coffee MorningTuesday 14th January 2014, from 9 : 00 to 11: 00 Bldg 504 (Restaurant No 2 – DSR) 1st Floor, Club Room 3 Epiphany (French tradition - "Tirer les rois")   Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch.

  5. Cern Women's Club

    CERN Multimedia

    Club des cernoises

    2013-01-01

    Coffee MorningTuesday 14th May 2013, 9:30 Bldg 504 (Restaurant No 2 – DSR) 1st Floor, Club Room 3 Annual General Meeting Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch

  6. Cern Women's Club

    CERN Multimedia

    Club des cernoises

    2013-01-01

    Coffee MorningTuesday 9th April 2013, 9:00 – 14:00 Bldg 504 (Restaurant No 2 – DSR) Ground Floor Spring Jumble Sale Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch/Club-WomensClub/

  7. CERN Women's Club

    CERN Multimedia

    CERN Women's Club

    2012-01-01

    Coffee Morning Tuesday 15th  May 2012, 9:00 Building 504,  (Restaurant No 2 – DSR) 1st Floor, Club Room 3 Annual General Meeting Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch/Club-WomensClub/

  8. CERN Women's Club

    CERN Multimedia

    CERN Women's Club

    2013-01-01

    Coffee Morning Tuesday 10th September 2013, 9:00 Bldg 504, (Restaurant No 2 – DSR) 1st Floor, Club Room 3 Registration Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch/Club-WomensClub/

  9. Cern Women's Club

    CERN Multimedia

    Club des cernoises

    2013-01-01

    Coffee MorningTuesday 12th March 2013, 9:00 – 11:00 Bldg 504 (Restaurant No 2 – DSR) 1st Floor, Club Room 3 Eastern Tradition Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch/Club-WomensClub/

  10. CERN Women's Club

    CERN Multimedia

    CERN Women's Club

    2012-01-01

    offee Morning Tuesday 12th  June 2012, 12:30 Annual Club Lunch at "The Physalis" in Prévessin Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch/Club-WomensClub/

  11. Cern Women's club

    CERN Multimedia

    Club des Cernoises

    2013-01-01

    Coffee Morning Tuesday 5th  February 2013, 9:00 – 11:00 Bldg 504 (Restaurant No 2 – DSR) 1st  Floor, Club Room 3 Presentation of cheque to Nous Aussi Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch/Club-WomensClub/    

  12. Cern Women's Club

    CERN Multimedia

    Club des cernoises

    2012-01-01

    Coffee MorningTuesday 15th January 2013, 9:00 – 11:00 Bldg 504 (Restaurant No 2 – DSR) 1st Floor, Club Room 3 Epiphany (French tradition – “Tirer les rois”) Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch/Club-WomensClub/

  13. Cern Women's Club

    CERN Multimedia

    Club des cernoises

    2013-01-01

    Coffee MorningTuesday 12th November 2013, from 9:00 to 11:00 Bldg 504 (Restaurant No 2 – DSR) 1st Floor, Club Room 3 Organisation of Christmas Sale Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch.

  14. CERN Relay Race 2009

    CERN Multimedia

    2009-01-01

    The CERN relay race will take place around the Meyrin site on Thursday 14th May starting at 12:15. If possible, please avoid driving on the site during this 20-minute period. If you do meet runners while driving your car, please STOP until they have all passed. Thank you for your cooperation. More details on how to register your team for the relay race

  15. CERN Electronics Pool presentations

    CERN Multimedia

    2011-01-01

    The CERN Electronics Pool has organised a series of presentations in collaboration with oscilloscope manufacturers. The last one will take place according to the schedule below.   Time will be available at the end of the presentation to discuss your personal needs. The Agilent presentation had to be postponed and will be organised later. -     Lecroy: Thursday, 24 November 2011, in 530-R-030, 14:00 to 16:30.

  16. Results from the October 2014 CERN test beam of LumiCal

    CERN Document Server

    Borysov, O; Levy, A; Levy, I; Lukic, S; Moron, J; Neagu, A T; Preda, T; Rosenblat, O

    2016-01-01

    A prototype of a luminometer, designed for a future e+e- collider detector, was tested in the CERN PS accelerator T9 testbeam. The objective of this test beam was to demonstrate a multi-plane operation, to study the development of the electromagnetic shower and to compare it with MC simulations.

  17. CERN on the net

    CERN Multimedia

    2008-01-01

    As all eyes turn to the LHC in the run-up to the big switch-on, online media are providing a keyhole into the deepest corners of CERN. From YouTube to blogs, communicating ideas has never before had the capacity to reach so many people. A wide range of websites comment on CERN.Blogs, YouTube, social networking, podcasting, Twitter, SecondLife, Flickr…. it’s easy to get lost in the ever expanding world of Web 2.0. But it’s also hard to ignore the fact that these web facilities are becoming a central part of everyday life, whether it’s for finding information, sharing interests with friends, keeping up to date with news, or simply for entertainment. CERN’s profile on these sites is also increasing, but as with everything on the Internet there is a huge range in the quality of information available, stretching from officially endorsed sites all the way to the plain ridiculous! This is our guide to some of the best CERN conte...

  18. Denis Guedj at CERN

    CERN Multimedia

    2009-01-01

    Denis Guedj (right), pictured with Etiennette Auffray Hillemanns of the CMS collaboration and Hartmut Hillemanns of the DG-KTT group.French author Denis Guedj, who is also a mathematician and Professor of History of Science at Paris VIII University, visited CERN on 7 and 8 October. During a presentation in the CERN Library he discussed his 15 published books and likened the process of novel writing to working on a scientific experiment: it begins with a limited amount of data, and then questions arise, problems are solved and further research reveals truths. Denis Guedj works hard to ensure that his novels contain ‘true fiction’. His most recent visit to CERN will help him to write a new book set at the LHC in which he will combine his scientific interest in what happens when a proton and proton collide with a human story about what happens to a male and female physicist who meet in the LHC tunnel. "Visiting the CMS cavern was...

  19. New psychologist at CERN

    CERN Multimedia

    Laëtitia Pedroso

    2010-01-01

    A new psychologist, Sigrid Malandain, started work at CERN on 1 November. The psychologist’s office, formerly part of the Social Affairs Service in Human Resources, has now moved to the Medical Service (office 57-1-024). It is open every Tuesday and Thursday.   The new psychologist, Sigrid Malandain. Working in an organisation like CERN has numerous advantages. However, as in any professional setting, the work can sometimes bring stress, anxiety, overwork and so on. For this reason, a few years ago CERN brought in a psychologist for the staff. “As a psychologist, my role isn’t just to deal with known problems, but also to make assessments and, if possible, prevent difficult situations arising. Sometimes people realise that something is wrong, but they can’t say why. In such cases, I may be able to use a discussion to assess the nature of the problem and determine if further sessions are needed. If that is the case, I can either conduct the session...

  20. Control week at CERN

    CERN Multimedia

    2008-01-01

    From 19 to 23 May, the IT-CO Group will be organising the first "Poster forum" at CERN on the theme of process control. Process control lies at the heart of numerous conferences across the world in which CERN takes an active part. Many posters have been produced, and these deserve to be presented to everybody in order to give value to, share and derive maximum benefit from the software, tools and methods developed and used at CERN in this field. This initiative will also allow each group, section and member of the personnel to present their work to others at the Laboratory. The forum will take place from 19 to 23 May in the main hall of Building 500, leading to Restaurant No. 1, on the Meyrin site. To stimulate discussions and exchanges, the authors will be in attendance by their posters on Thursday 22 May between 12 noon and 2.00 p.m. Interested? If you wish to take part and present your work, please contact mathias.philippe.dutou...

  1. Upcycling CERN Exhibitions

    CERN Multimedia

    Katarina Anthony

    2015-01-01

    Summer is coming - and with it, a new Microcosm exhibition showcasing CERN (see here). But while the new exhibit is preparing to enchant visitors, many have been asking about the site's former content. Will it simply be out with the old and in with the new? Not as such!   The plasma ball from Microcosm is now on display at the LHCb site. As Microcosm's new content is moving in, its old content is moving up. From LHCb to IdeaSquare, former Microcosm displays and objects are being installed across the CERN site. "Microcosm featured many elements that were well suited to life outside of the exhibition," says Emma Sanders, Microcosm project leader in the EDU group. "We didn't want this popular content to go to waste, and so set out to find them new homes across CERN." The LHCb experiment has received a number of Microcosm favourites, including the Rutherford experiment, the cosmic ray display and the Thomson experiment. "We&...

  2. On location at CERN

    CERN Multimedia

    Joannah Caborn Wengler

    2012-01-01

    CERN continues to be a very popular candidate for film locations at the moment. Not only has it inspired a German author and a film-maker interested in the more exotic interpretations of the science being worked on at the Organization, but even the recent puppet animation film by the legendary Muppets featured some CERN scenes.   Dr Bunsen Honeydew (far left) and his friends at ATLAS. Beaker, Bunsen's assistant, has just been sucked up the vacuum tube top left... Image courtesy Walt Disney Studios. In “The Muppet Movie”, released in November 2011 in North America and world-wide in January and February this year, Kermit is reuniting his friends who have ended up in some far-flung places since they last worked together 10 years ago. CERN caught the imagination of the film-makers as the perfect place for the Muppet scientists, Dr. Honeydew Bunsen and his hapless assistant Beaker. After a brief scene filmed in front of a backdrop of the ATLAS detector, the rest of the ...

  3. CERN, accelerator of motivation

    CERN Multimedia

    François Becler

    2014-01-01

    Have your dreams ever come true? My dream did, when I was lucky enough to be allowed into the world’s largest particle physics laboratory and spend five whole days there.   François, in front of LEP's DELPHI detector, displayed in the LHCb cavern. François was given the opportunity to visit the experiment during his placement at CERN. I’m a pupil in my last year at the Collège Jean-Jacques Rousseau in Saint-Julien-en-Genevois and was on a work experience placement at CERN from 16 to 20 December last year. I’m so happy I was chosen because working alongside physicists and engineers of all nationalities was like a dream come true. The first thing that impressed me was the size of the site, its infrastructures and facilities but also the fact that I was working in a prestigious, world-renowned organisation. I spent lots of time looking at the map and trying to find my way around... CERN's such a massive place ! Th...

  4. Spanish Visit to CERN

    CERN Multimedia

    2002-01-01

    Last week CERN was visited by the Spanish Minister of Science and Technology, Josep Piqué i Camps. While here, he was able to visit the ATLAS assembly hall where many items of equipment are being built in collaboration with Spanish academic institutions or firms. These include the vacuum vessels for the ATLAS barrel toroid magnets supplied by the Spanish firm Felguera Construcciones Mechanics. Similarly, the Universidad Autónoma de Madrid is participating in the manufacture of the electromagnetic calorimeter endcaps, while the Barcelona Institute for High Energy Physics and the Valencia IFIC (Instituto de Física Corpuscular) are highly involved in the production of barrel modules for the tile calorimeter. The delegation, accompanied by Spanish scientists at CERN, also visited the LHC superconducting magnet test hall (photo). From left to right: Felix Rodriguez Mateos of CERN LHC Division, Josep Piqué i Camps, Spanish Minister of Science and Technology, César Dopazo, Director-General of CIEMAT (Spanish ...

  5. CERN GSM monitoring system

    CERN Multimedia

    Ghabrous Larrea, C

    2009-01-01

    As a result of the tremendous development of GSM services over the last years, the number of related services used by organizations has drastically increased. Therefore, monitoring GSM services is becoming a business critical issue in order to be able to react appropriately in case of incident. In order to provide with GSM coverage all the CERN underground facilities, more than 50 km of leaky feeder cable have been deployed. This infrastructure is also used to propagate VHF radio signals for the CERN’s fire brigade. Even though CERN’s mobile operator monitors the network, it cannot guarantee the availability of GSM services, and for sure not VHF services, where signals are carried by the leaky feeder cable. So, a global monitoring system has become critical to CERN. In addition, monitoring this infrastructure will allow to characterize its behaviour over time, especially with LHC operation. Given that commercial solutions were not yet mature, CERN developed a system based on GSM probes and an application...

  6. CERN honours Carlo Rubbia

    CERN Document Server

    2009-01-01

    Carlo Rubbia turned 75 on March 31, and CERN held a symposium to mark his birthday and pay tribute to his impressive contribution to both CERN and science. Carlo Rubbia, 4th from right, together with the speakers at the symposium.On 7 April CERN hosted a celebration marking Carlo Rubbia’s 75th birthday and 25 years since he was awarded the Nobel Prize for Physics. "Today we will celebrate 100 years of Carlo Rubbia" joked CERN’s Director-General, Rolf Heuer in his opening speech, "75 years of his age and 25 years of the Nobel Prize." Rubbia received the Nobel Prize along with Simon van der Meer for contributions to the discovery of the W and Z bosons, carriers of the weak interaction. During the symposium, which was held in the Main Auditorium, several eminent speakers gave lectures on areas of science to which Carlo Rubbia made decisive contributions. Among those who spoke were Michel Spiro, Director of the French National Insti...

  7. Serbian President visits CERN

    CERN Document Server

    Katarina Anthony

    2012-01-01

    On Tuesday 10 January, Serbian President Boris Tadić visited the Laboratory to sign the Agreement of granting the status of Associate Membership as the pre-stage to full Membership of CERN.    Before the signing ceremony, the President, welcomed by Director-General Rolf Heuer at CERN’s Point 5, took the opportunity to visit CERN. After a general introduction, the President took advantage of the shutdown to visit the LHC’s underground caverns. Leading the President through their respective experiments were spokespersons Fabiola Gianotti (ATLAS) and Joe Incandela (CMS).  After a morning of tours, President Tadić and Rolf Heuer signed the Agreement. Serbia’s status as an Associate Member as pre-stage to full Membership is expected to come into force following ratification by the Serbian Parliament. After a maximum period of five years, the CERN Council will decide on the admission of Serbia to full Membership. This new agreement continues Serbia&a...

  8. CERN Housing Service: Hostels

    CERN Multimedia

    2006-01-01

    Arrangements for the end of the year closure: Hostels on the CERN site During the closure of CERN for Christmas and the New Year, the hostels will be closed from midday on Friday, December 22, 2006 until Monday, January 8, 2007 at 7h30. All accounts must be settled and room keys returned to the Reception before 10 a.m. on Friday, December 22, 2006. Hostel in St. Genis-Pouilly The wing reserved for CERN will be closed from midday on Friday, December 22, 2006 until Monday, January 8, 2007 at 8h00. Anyone with no alternative but to stay in the hostel during this period can be accommodated in another part of the building, subject to availability. The people concerned must make the appropriate reservations in person at the Reception of the St. Genis Hostel, as far in advance as possible and in any case no later than Friday, December 15, 2006. The total length of stay during the two weeks in question must be paid for in advance, no later than Friday, December 15, 2006. All reservations remaining unpaid aft...

  9. CERN HOUSING SERVICE: HOSTEL

    CERN Multimedia

    2000-01-01

    1. Arrangements for the end of the year closure 1.1 Hostel on the CERN site During the closure of CERN for Christmas and the New Year, the hostel will be closed from mid-day on Friday, December 22, 2000 until Monday, January 8, 2001 at 8h00. All accounts must be settled and room keys returned to the Reception before 10h00 on Friday, December 22, 2000. 1.2 Hostel in St. Genis-Pouilly The wing reserved for CERN will be closed from mid-day on Friday, December 22, 2000 until Monday, January 8, 2001 at 8h00. Anyone with no alternative but to stay in the Hostel during this period can be accommodated in another part of the building. The people concerned must make the appropriate reservations in person at the Reception of the St. Genis Hostel, as far in advance as possible and in any case no later than Friday, December 15, 2000. The total length of stay during the two weeks in question must be paid in advance, no later than Friday, December 15, 2000. All reservations remaining unpaid after this date will be cancelled...

  10. CERN HOUSING SERVICE: HOSTEL

    CERN Multimedia

    2003-01-01

    1. Arrangements for the end of the year closure 1.1 Hostel on the CERN site During the closure of CERN for Christmas and the New Year, the hostel will be closed from mid-day on Friday, December 19, 2003 until Monday, January 5, 2004 at 8h00. All accounts must be settled and room keys returned to the Reception before 10h00 on Friday, December 19, 2003. 1.2 Hostel in St. Genis-Pouilly The wing reserved for CERN will be closed from mid-day on Friday, December 19, 2003 until Monday, January 5, 2004 at 8h00. Anyone with no alternative but to stay in the Hostel during this period can be accommodated in another part of the building. The people concerned must make the appropriate reservations in person at the Reception of the St. Genis Hostel, as far in advance as possible and in any case no later than Friday, December 12, 2003. The total length of stay during the two weeks in question must be paid for in advance, no later than Friday, December 12, 2003. All reservations remaining unpaid after this date will be canc...

  11. CERN Housing Service: Hostel

    CERN Multimedia

    2004-01-01

    Arrangements for the end of the year closure Hostel on the CERN site During the closure of CERN for Christmas and the New Year, the hostel will be closed from mid-day on Friday, December 17, 2004 until Monday, January 3, 2005 at 8h00. All accounts must be settled and room keys returned to the Reception before 10h00 on Friday, December 17, 2004. Hostel in St. Genis-Pouilly The wing reserved for CERN will be closed from mid-day on Friday, December 17, 2004 until Monday, January 3, 2005 at 8h00. Anyone with no alternative but to stay in the Hostel during this period can be accommodated in another part of the building. The people concerned must make the appropriate reservations in person at the Reception of the St. Genis Hostel, as far in advance as possible and in any case no later than Friday, December 10, 2004. The total length of stay during the two weeks in question must be paid for in advance, no later than Friday, December 10, 2004. All reservations remaining unpaid after this date will be cancell...

  12. CERN HOUSING SERVICE: HOSTEL

    CERN Document Server

    2002-01-01

    1. Arrangements for the end of the year closure 1.1 Hostel on the CERN site During the closure of CERN for Christmas and the New Year, the hostel will be closed from midday on Friday 20 December 2002 until Monday 6 January 2003 at 8h00. All accounts must be settled and room keys returned to the Reception before 10h00 on Friday 20 December 2002. 1.2 Hostel in St. Genis-Pouilly The wing reserved for CERN will be closed from midday on Friday 20 December 2002 until Monday 6 January 2003 at 8h00. Anyone with no alternative but to stay in the Hostel during this period can be accommodated in another part of the building. The people concerned must make the appropriate reservations in person at the Reception of the St. Genis Hostel, as far in advance as possible and in any case no later than Friday 13 December 2002. The total length of stay during the two weeks in question must be paid for in advance, no later than Friday 13 December 2002. All reservations remaining unpaid after this date will be cancelled. 2. Reminde...

  13. CERN Housing Service: Hostels

    CERN Multimedia

    2006-01-01

    Arrangements for the end of the year closure: Hostels on the CERN site During the closure of CERN for Christmas and the New Year, the hostels will be closed from mid-day on Friday, December 22, 2006 until Monday, January 8, 2007 at 7h30. All accounts must be settled and room keys returned to the Reception before 10 a.m. on Friday, December 22, 2006. Hostel in St. Genis-Pouilly The wing reserved for CERN will be closed from mid-day on Friday, December 22, 2006 until Monday, January 8, 2007 at 8h00. Anyone with no alternative but to stay in the hostel during this period can be accommodated in another part of the building, subject to the number of rooms available. The people concerned must make the appropriate reservations in person at the Reception of the St. Genis Hostel, as far in advance as possible and in any case no later than Friday, December 15, 2006. The total length of stay during the two weeks in question must be paid for in advance, no later than Friday, December 15, 2006. All reservations r...

  14. CERN Housing Service : HOSTELS

    CERN Multimedia

    2005-01-01

    ARRANGEMENTS FOR THE END-OF-YEAR CLOSURE Hostels on the CERN site During the CERN shutdown over Christmas and the New Year, the hostels will be closed from midday on Wednesday, 21 December 2005 until 7.30 a.m. on Thursday, 5 January 2006. All accounts must be settled and room keys returned to the Reception before 10.00 a.m. on Wednesday, 21 December 2005. Hostel in St. Genis-Pouilly The wing reserved for CERN will be closed from midday on Wednesday, 21 December 2005 until 8.00 a.m. on Thursday, 5 January 2006. Anyone with no alternative but to stay in the hostel during this period can be accommodated in another part of the building, subject to availability. Those concerned must make the appropriate reservations in person at the Reception of the St. Genis Hostel as early as possible and in any case no later than Wednesday, 14 December 2005. The total stay during the two weeks in question must be paid for in advance, no later than Wednesday, 14 December 2005. After this date, any reservations that have ...

  15. CERN's first female firefighter

    CERN Multimedia

    Alizée Dauvergne

    2010-01-01

    Until recently, the women's changing room in the Fire Station, built in 2005, has always been empty. With the arrival of Séverine Peverelly, CERN's first female firefighter, it now has a purpose. Séverine Peverelly took up her post as a firefighter in April. Séverine, who comes from Gap in France, took up her post as a firefighter in the CERN fire brigade at the beginning of April. "We were looking for a new member," explains David Peyron, Head of the Fire and Rescue Service. It didn't matter if it was a man or a woman; we needed a firefighter with the right skills, and Séverine just happened to have them." With ten years experience working in French fire services, Séverine was looking for a new challenge. "What attracted me to CERN was the international dimension, because that creates additional challenges," she explains. And these can be considerable! For one thing, every country has its own way of worki...

  16. CERN: an aerial view

    CERN Multimedia

    2004-01-01

    On 30th January, when CERN still resembled a winter wonderland, a helicopter with a photographer on board took off on an aerial tour. One sunny morning at the end of January, when the area was waking up to an overnight snowfall, a helicopter took off from the Meyrin site with a CERN photographer on board. CERN has been the subject of aerial photographs ever since its creation. Although its appearance has changed over the years, the Laboratory has aged well. The aerial photographs taken during its fifty-year history bear witness to its expansion, showing how a handful of buildings and a first accelerator have blossomed into an entire machine complex. Let's take to the skies and have a look at some of the photos taken on this crisp January morning: a sight for sore eyes! In the foreground, Building 40 on the Meyrin site is recognisable from its magnet shape.On the right of the Route de Meyrin (crossing the photo diagonally), next to Point 1, the work on the Globe of Innovation, which got underway at the beg...

  17. CERN Library | Agnes Chavez @ CERN | 17 March

    CERN Multimedia

    2015-01-01

    Agnes Chavez will present her work on Tuesday, 17 March 2015 at 4 p.m. in the Library (Builidng. 52-1-052) Coffee will be served from 3.30 p.m.   Agnes Chavez is an artist and educator participating in a two-week research stay organised by the ATLAS Experiment at CERN. Chavez is using the stay to develop her art and education project, Projecting pARTicles, which will be exploring particle physics through projection art. Chavez experiments with data visualization, sound and projection art to create participatory environments. She collaborates with programmers to create algorithmic drawings projected on to buildings, walls and spaces. This work explores our relationship with nature and technology, and how these and other sensory experiences determine how we perceive and interpret the world around us. For the Projecting pARTicles series she has formed an interdisciplinary team of programmers, artists, scientists and educators to investigate how we can create art and education interventions inspire...

  18. Static reactive power compensation for the pulse power supply plant of the CERN booster

    CERN Document Server

    Jahn, K; Schluter, W

    1975-01-01

    If pulse power supplies with high-capacity static converters are connected directly to an 18 kV network without any special compensation measures being adopted, certain problems must be overcome. The article describes a new reactive-power compensation system in detail, a number of oscillograms being used to illustrate the results obtained. The system is also suitable for use in metallurgical plants and rolling mills where there are large fluctuations in the reactive power, and in steelworks for working in parallel with electric arc furnaces. (2 refs).

  19. CERN: Fixed target targets

    International Nuclear Information System (INIS)

    Full text: While the immediate priority of CERN's research programme is to exploit to the full the world's largest accelerator, the LEP electron-positron collider and its concomitant LEP200 energy upgrade (January, page 1), CERN is also mindful of its long tradition of diversified research. Away from LEP and preparations for the LHC proton-proton collider to be built above LEP in the same 27-kilometre tunnel, CERN is also preparing for a new generation of heavy ion experiments using a new source, providing heavier ions (April 1992, page 8), with first physics expected next year. CERN's smallest accelerator, the LEAR Low Energy Antiproton Ring continues to cover a wide range of research topics, and saw a record number of hours of operation in 1992. The new ISOLDE on-line isotope separator was inaugurated last year (July, page 5) and physics is already underway. The remaining effort concentrates around fixed target experiments at the SPS synchrotron, which formed the main thrust of CERN's research during the late 1970s. With the SPS and LEAR now approaching middle age, their research future was extensively studied last year. Broadly, a vigorous SPS programme looks assured until at least the end of 1995. Decisions for the longer term future of the West Experimental Area of the SPS will have to take into account the heavy demand for test beams from work towards experiments at big colliders, both at CERN and elsewhere. The North Experimental Area is the scene of larger experiments with longer lead times. Several more years of LEAR exploitation are already in the pipeline, but for the longer term, the ambitious Superlear project for a superconducting ring (January 1992, page 7) did not catch on. Neutrino physics has a long tradition at CERN, and this continues with the preparations for two major projects, the Chorus and Nomad experiments (November 1991, page 7), to start next year in the West Area. Delicate neutrino oscillation effects could become

  20. A note on fuzzy PS-ideals in PS-algebra and its level subsets

    Directory of Open Access Journals (Sweden)

    Priya Thirugapillai

    2014-03-01

    Full Text Available In this paper, a new notion, named fuzzification of PS – Algebra, which is a generalization of BCK/BCI/TM/BH/Q/d/KU-algebras, is introduced, along with PS-ideal and we have discussed some of their properties in detail. Keywords: PS-Algebra, PS-ideal, Fuzzy PS-Ideal, Level Subsets, PS-Subalgebra and Fuzzy PS-Subalgebra.

  1. A multichannel time-to-digital converter ASIC with better than 3 ps RMS time resolution

    International Nuclear Information System (INIS)

    The development of a new multichannel, fine-time resolution time-to-digital converter (TDC) ASIC is currently under development at CERN. A prototype TDC has been designed, fabricated and successfully verified with demonstrated time resolutions of better than 3 ps-rms. Least-significant-bit (LSB) sizes as small as 5 ps with a differential-non-linearity (DNL) of better than ±0.9 LSB and integral-non-linearity (INL) of better than ±1.3 LSB respectively have been achieved. The contribution describes the implemented architecture and presents measurement results of a prototype ASIC implemented in a commercial 130 nm technology

  2. CERN openlab enters fifth phase

    CERN Multimedia

    Andrew Purcell

    2015-01-01

    CERN openlab is a unique public-private partnership between CERN and leading ICT companies. At the start of this year, openlab officially entered its fifth phase, which will run until the end of 2017. For the first time in its history, it has extended beyond the CERN community to include other major European and international research laboratories.   Founded in 2001 to develop the innovative ICT systems needed to cope with the unprecedented computing challenges of the LHC, CERN openlab unites science and industry at the cutting edge of research and innovation. In a white paper published last year, CERN openlab set out the main ICT challenges it will tackle during its fifth phase, namely data acquisition, computing platforms, data storage architectures, computer management and provisioning, networks and connectivity, and data analytics. As it enters its fifth phase, CERN openlab is expanding to include other research laboratories. "Today, research centres in other disciplines are also st...

  3. Italy's Prime Minister visits CERN

    CERN Multimedia

    Stefania Pandolfi

    2015-01-01

    On Tuesday, 7 July 2015, the Prime Minister of the Italian Republic, Matteo Renzi, visited CERN. He was accompanied by a delegation that included Italy's Minister for Education, University and Research, Stefania Giannini.   From left to right: Fernando Ferroni, President of the Istituto Nazionale di Fisica Nucleare (INFN); Sergio Bertolucci, CERN Director for Research and Scientific Computing; Stefania Giannini, Italy's Minister of Education, University and Research; Matteo Renzi, Prime Minister of the Italian Republic; Fabiola Gianotti, CERN Director-General Designate; Rolf Heuer, CERN Director-General.   The Prime Minister was welcomed by members of the CERN Management together with former CERN Director-General and Senator for Life of the Italian Republic, Carlo Rubbia. After a brief general introduction to CERN’s activities by Rolf Heuer, the Italian delegation visited LHC Point 1. After a tour of the ATLAS control room, they donned helmets to visit th...

  4. CERN openlab Summer Student Programme

    CERN Multimedia

    2012-01-01

    CERN openlab is currently taking applications for its summer student programme. The closing date for applications is 30 March 2012.   The openlab Summer Student Programme is open for applications from bachelor, master and PhD students in computer science and physics. Successful applicants will spend 8 weeks at CERN, during the period June to September 2012, to work with some of the latest hardware and software technologies. The programme is more than just a summer at CERN: it can lead to follow-on projects at the home institute and may even inspire the students to become entrepreneurs in cutting-edge computing technologies. A series of lectures will be given by experts in various domains of CERN related high-throughput computing. Study tours to external companies and universities as well as to CERN facilities are also part of the programme. Please visit www.cern.ch/openlab-students for more information.

  5. CERN openlab summer student programme

    CERN Multimedia

    2013-01-01

    CERN openlab is currently taking applications for its summer student programme. The closing date for applications is 31 March 2013.   The openlab summer student programme is open for applications from bachelor, master and PhD students in computer science and physics. Successful applicants will spend 9 weeks at CERN, during the period from June to September 2013, working with some of the latest hardware and software technologies. The programme is more than just a summer at CERN: it can lead to follow-on projects at the home institute and may even inspire students to become entrepreneurs in cutting-edge computing technologies. A series of lectures will be given by experts in various domains of CERN-related high-throughput computing. Study tours of external companies and universities as well as of CERN facilities are also part of the programme. Please visit the CERN openlab website for more information.

  6. Exploration of tune point for booster

    International Nuclear Information System (INIS)

    Booster is working as a common injector for Indus-1 and Indus-2 synchrotron radiation sources at Raja Ramanna Centre for Advanced Technology. To augment its performance, new dipole and quadrupole magnets are being design as a replacement of the existing magnets. In the new quadrupole magnets, sextupole magnetic field is also incorporated for correction of natural chromaticity. In the presence of sextupole, multipoles and linear imperfections may reduce the dynamic aperture. The studies of the dynamic aperture with multipoles evolved in magnet design and magnet misalignment are carried out to explore a suitable tune point in vicinity of its operating tune point. Brief results are presented in this paper. (author)

  7. Space Transportation Booster Engine (STBE) configuration study

    Science.gov (United States)

    1986-01-01

    The overall objective of this Space Transportation Booster Engine (STBE) study is to identify candidate engine configurations which enhance vehicle performance and provide operational flexibility at low cost. The specific objectives are as follows: (1) to identify and evaluate candidate LOX/HC engine configurations for the Advanced Space Transportation System for an early 1995 IOC and a late 2000 IOC; (2) to select one optimum engine for each time period; 3) to prepare a conceptual design for each configuration; (4) to develop a technology plan for the 2000 IOC engine; and, (5) to prepare preliminary programmatic planning and analysis for the 1995 IOC engine.

  8. Golden Jubilee photos: CERN gets a second Laboratory

    CERN Multimedia

    2004-01-01

    CERN's first large accelerator, the Proton Synchrotron (PS), had hardly come into operation at the beginning of the 1960s, when physicists started to dream of a machine ten times more powerful, operating at 300 Gigaelectronvolts. The construction of such an accelerator required a new laboratory to be built and several European sites were candidates. John Adams, the project leader, suggested using the PS as an injector for the new machine, to achieve the higher energy level at a lower cost. The new Laboratory was therefore to be built on a site adjacent to CERN. The project was approved in 1971, but the CERN Convention, which only provided for a single laboratory, had to be amended. An agreement was signed with France on 16 June 1972 (see photograph), establishing a new site at Prévessin, in the Pays de Gex. The two laboratories, which each had their own administrative structures and Directors-General, were merged in 1976.

  9. Speed of light exceeded in 31st CERN Relay

    CERN Multimedia

    2001-01-01

    In the closest-ever finish of the CERN relay race, Florian Marinet (number 54) of the Neutrinos to Gran Sasso team just fails to catch Pierre Maesen of The Shabbys on the line. The AThLetic AceS team (number 76) won the Veterans category by just 3 seconds from long-time participants The Lynx Runners, who didn't leave empty handed. They picked up the cup that is drawn at random. Evidence for new physics? No, simply evidence for faster legs. Only at CERN could the speed of light come third to a team called The Shabbys. But that's exactly what happened on Wednesday 23 May when the team from PS Division lifted the Opitz cup after winning the 31st CERN relay race. The Shabbys sped home in 10 minutes 53 seconds, just 0.3 of a second ahead of the 'Neutrinos to Gran Sasso' team. There's some logic there since it is the PS complex that will provide the protons that will give rise to the neutrino beam. As for 'c0 the speed of light', they took a relatively leisurely 11 minutes 1.6 seconds to cover the course. A total...

  10. Dear CERN and ESO Colleagues and Retirees

    CERN Multimedia

    Pension Fund

    2010-01-01

    Following approval by the CERN Pension Fund Governing Board, the CERN Pension Fund team is pleased to announce the new website address of your Pension Fund: http://pensionfund.cern.ch I take this opportunity to thank all the technical teams at CERN for the quality and rapidity of their support. Kind regards, Théodore Economou CEO, CERN Pension Fund

  11. Scientific Information Service at CERN

    CERN Document Server

    Pereira, Margarida

    2016-01-01

    Dissemination of information is an essential part of CERN's mission. It brings people together from all around the world and trains the scientists of tomorrow. CERN scientific output is documented and made available for the scientific community and the general public through the CERN Document Server, INSPIRE-HEP and Wikipedia. This report presents the work done in the Scientific Information Service during the summer student program.

  12. Upgrade Issues for the CERN Accelerator Complex

    CERN Document Server

    Garoby, R

    2008-01-01

    The Large Hadron Collider (LHC) at CERN is at a very advanced stage of hardware commissioning and the first beam collisions in the experiments are expected during the year 2008. In line with the recommendations issued in 2006 by the European Strategy Group for Particle Physics, work has now started for maximizing the physics reach of the LHC and for preparing for other foreseeable needs. Beyond upgrades in the LHC itself, mainly in the optics of the insertions, the injector complex has to be renewed to deliver beam with upgraded characteristics with a high reliability. In a first phase, a new 160 MeV H-linac ("Linac4") will be built to replace the present 50 MeV proton linac (Linac2) and extensive consolidation will be made. In a second phase, the present 26 GeV PS and its set of injectors (Linac2 + PSB) are planned to be replaced with a ~50 GeV synchrotron ("PS2") using a ~4 GeV superconducting proton linac ("SPL") as injector. The SPS itself will also be the subject of major improvements, to be able to cope...

  13. CERN Permanent exhibitions short version

    CERN Multimedia

    2016-01-01

    Visits Explore by yourself the issues CERN's physicists are trying to solve: given that the entire universe is made of particles, where do they come from? Why do they behave in the way they do? Discover the massive apparatus used by physicists at CERN, like the LHC, and see how each part works. CERN invites the public to discover the mysteries of the Universe and the work of the world's biggest physics laboratory through free of charge guided tours and permanent exhibitions. As a group, with friends, individually, on foot, on your bike, come and discover CERN or explore it virtually. Welcome!

  14. STS-27 Atlantis, OV-104, solid rocket booster (SRB) inspection

    Science.gov (United States)

    1988-01-01

    Engineers, kneeling inside a hollow solid rocket booster (SRB), closely inspect the SRB segments and seams in the Kennedy Space Center (KSC) rotation and processing facility. The SRB will be used on STS-27 Atlantis, Orbiter Vehicle (OV) 104. The booster segments were transported via rail car from Morton Thiokol's Utah manufacturing plant. View provided by KSC with alternate number KSC-88PC-492.

  15. CERN Technical Training 2003: Learning for the LHC!

    CERN Multimedia

    2003-01-01

    AXEL-2003  -  Introduction to Particle Accelerators   AXEL-2003 is a course given at CERN within the framework of the Technical Training Programme. The course will present an introduction to particle accelerators. Known in the past as the PS Complex Operation Course (or the "PS Shutdown Course"), and organised by the ex-PS division until last year, it is now organised as a joint venture between the AB division and Technical Training, and open to a wider CERN community. The AXEL-2003 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course and the course supports will be in English, with questions and answers also in French. Lectur...

  16. CERN Technical Training 2003: Learning for the LHC!

    CERN Document Server

    2003-01-01

    AXEL-2003 - Introduction to Particle Accelerators AXEL-2003 is a course given at CERN within the framework of the Technical Training Programme. The course will present an introduction to particle accelerators. Known in the past as the PS Complex Operation Course (or the "PS Shutdown Course"), and organised by the ex-PS division until last year, it is now organised as a joint venture between the AB division and Technical Training, and open to a wider CERN community. The AXEL-2003 course series is designed for technicians who are operating an accelerator, or whose work is closely linked to accelerators, but it is open to all people (technicians, engineers, physicists) interested in this field. The course does not require any prior knowledge on accelerators. However, some basic knowledge on trigonometry, matrices and differential equations, and some basic notions of magnetism would be an advantage. The course and the course supports will be in English, with questions and answers also in French. Lectures wil...

  17. LHC Injectors Upgrade (LIU) Project at CERN

    CERN Document Server

    Shaposhnikova, Elena; Damerau, Heiko; Funken, Anne; Gilardoni, Simone; Goddard, Brennan; Hanke, Klaus; Kobzeva, Lelyzaveta; Lombardi, Alessandra; Manglunki, Django; Mataguez, Simon; Meddahi, Malika; Mikulec, Bettina; Rumolo, Giovanni; Scrivens, Richard; Vretenar, Maurizio

    2016-01-01

    A massive improvement program of the LHC injector chain is presently being conducted under the LIU project. For the proton chain, this includes the replacement of Linac2 with Linac4 as well as all necessary upgrades to the Proton Synchrotron Booster (PSB), the Proton Synchrotron (PS) and Super Proton Synchrotron (SPS), aimed at producing beams with the challenging High Luminosity LHC (HL-LHC) parameters. Regarding the heavy ions, plans to improve the performance of Linac3 and the Low Energy Ion Ring (LEIR) are also pursued under the general LIU program. The full LHC injection chain returned to operation after Long Shutdown 1, with extended beam studies taking place in Run 2. A general project Cost and Schedule Review also took place in March 2015, and several dedicated LIU project reviews were held to address issues awaiting pending decisions. In view of these developments, 2014 and 2015 have been key years to define a number of important aspects of the final LIU path. This paper will describe the reviewed LI...

  18. CERN PSB Beam Tests of CNAO Synchrotron's Digital LLRF

    CERN Document Server

    Angoletta, M E; De Martinis, C; Falbo, L; Findlay, A; Foglio, R; Hunt, S; Tourres, D; Vescovi, C

    2008-01-01

    The Italian National Centre for Oncological hAdrontherapy (CNAO), in its final construction phase, uses proton and carbon ion beams to treat patients affected by solid tumours. At the heart of CNAO is a 78- meter circumference synchrotron that accelerates particles to up to 400 MeV/u. The synchrotron relies on a digital LLRF system based upon Digital Signal Processors (DSPs) and Field Programmable Gate Array (FPGA). This system implements cavity servoing and beam control capabilities, such as phase and radial loops. Beam tests of the CNAO synchrotron LLRF system were carried out at CERN's Proton Synchrotron Booster (PSB) in autumn 2007, to verify the combined DSP/FPGA architecture and the beam control capabilities. For this, a prototype version of CNAO's LLRF system was adapted to the PSB requirements. This paper outlines the prototype system layout and describes the tests carried out and their results. In particular, system architecture and beam control capabilities were successfully proven by comparison wit...

  19. Reference: RBCSBOX3PS [PLACE

    Lifescience Database Archive (English)

    Full Text Available RBCSBOX3PS Green PJ, Yong M-H, Cuozzo M, Kano-Murakami Y, Silverstein P, Chua N-H Binding site require...ments for pea nuclear protein factor GT-1 correlate with sequences required for light-dep

  20. CERN hearing day

    CERN Multimedia

    2005-01-01

    1 in 10 people suffer from hearing loss ? do you? The Medical Service invites everyone working on the CERN site to participate in the NATIONAL HEARING DAY on: Thursday 10th March 2005 From 9am to 4pm The Infirmary, Blg. 57, Ground Floor We will be offering hearing tests (audiograms), as well as information and advice on hearing loss, tinnitus, etc. Deafness does not just affect the elderly: in Europe, 50% of the hearing-impaired are under the age of 55. Exposure to excessive noise is one of the main reasons for hearing problems but prevention is possible. For example, hearing protection devices can prevent 80% of tinnitus cases.

  1. CERN hearing day

    CERN Multimedia

    2005-01-01

    1 in 10 people suffer from hearing loss - do you? The Medical Service invites everyone working on the CERN site to participate in the NATIONAL HEARING DAY on: Thursday 10th March 2005 From 9am to 4pm The Infirmary, Blg. 57, Ground Floor We will be offering hearing tests (audiograms), as well as information and advice on hearing loss, tinnitus, etc. Deafness does not just affect the elderly: in Europe, 50% of the hearing-impaired are under the age of 55. Exposure to excessive noise is one of the main reasons for hearing problems but PREVENTION IS POSSIBLE. For example, hearing protection devices can prevent 80% of tinnitus cases.

  2. CERN hearing day

    CERN Document Server

    2005-01-01

    1 in 10 people suffer from hearing loss - do you? The Medical Service invites everyone working on CERN premises to participate in the National Hearing Day on: Thursday 10th March From 9am to 4pm The Infirmary, Blg. 57, Gr.Fl. We will be offering hearing tests (audiogram); information, advice on hearing loss, tinnitus and more. Deafness does not just affect the elderly: in Europe, 50% the hearing-impaired are under the age of 55. Exposure to excessive noise is one of the main reasons for hearing loss. But prevention is possible and effective: for example, Hearing protection devices could reduce tinnitus cases by 80%.

  3. CERN hearing day

    CERN Document Server

    2005-01-01

    1 in 10 people suffer from hearing loss - do you? The Medical Service invites everyone working on CERN premises to participate in the National Hearing Day on: Thursday 10th March From 9am to 4pm The Infirmary, Blg. 57, Gr.Fl. We will be offering hearing tests (audiogram); information, advice on hearing loss, tinnitus and more. Deafness does not just affect the elderly: in Europe, 50% the hearing-impaired are under the age of 55. Exposure to excessive noise is one of the main reasons for hearing loss. But PREVENTION IS POSSIBLE AND EFFECTIVE: for example, Hearing protection devices could reduce tinnitus cases by 80%.

  4. 2014 CERN Accelerator Schools

    CERN Multimedia

    2014-01-01

    A specialised school on Power Converters will be held in Baden, Switzerland, from 7 to 14 May 2014. Please note that the deadline for applications is 7 FEBRUARY 2014. A course on Introduction to Accelerator Physics will be held in Prague, Czech Republic, from 31 August to 12 September 2014. Applications are now open for this school; the application deadline is 25 APRIL 2014. Further information on these schools and other CAS events can be found on the CAS website and on the Indico page. For further information please contact Barbara.strasser@cern.ch

  5. CONFERENCE FOR CERN PENSIONERS

    CERN Multimedia

    GS Department

    2010-01-01

    Wednesday 9 June 2010 from 2.30 p.m. to 5.00 p.m. Auditorium in Building 30 7-018 RESEARCH PROJECT “OPTIMUM BRAIN AGEING” Initial results of the study of the population of CERN pensioners Dr François HERRMANN, Geneva Technology and cognitive decline: prevention and compensation Professor Alain FRANCO, Nice, Vice-President of the IAGG (lnternational Association of Gerontology and Geriatrics) Discussion with the participants Admission free. The presentations will be in French.

  6. Conference for CERN pensioners

    CERN Multimedia

    GS Department

    2010-01-01

    Wednesday 9 June 2010 from 2.30 p.m. to 5.00 p.m. Auditorium in Building 30 7-018 RESEARCH PROJECT “OPTIMUM BRAIN AGEING” Initial results of the study of the population of CERN pensioners Dr François HERRMANN, Geneva Technology and cognitive decline: prevention and compensation Professor Alain FRANCO, Nice, Vice-President of the IAGG (lnternational Association of Gerontology and Geriatrics) Discussion with the participants Admission free. The presentations will be in French.

  7. Spotlight on CERN

    CERN Multimedia

    CERN video productions

    2009-01-01

    Welcome to the Globe of Science and Innovation for the first "Spotlight on CERN" just a few weeks before the restart of the LHC machine. Today our guest is Mike Lamont, who is in charge of the Operations Group for the accelerator beams. This weekend, protons were injected into the LHC for the first time since September 2008. But before we talk about that, let's go back a few weeks and look at the previous stage, which involved testing the transfer lines of the injection tunnels TI2/TI8. Our video team was there to film this operation.

  8. CERN Pension Fund move

    CERN Multimedia

    HR Department

    2007-01-01

    The CERN Pension Fund has moved to new offices at the 5th floor of Building 5. The Benefits Service of the Fund will henceforth receive you in the offices: 5-5-017 - 5-5-021 - 5-5-023. We remind you that the office hours are: Tuesday/Wednesday/Thursday from 10 am to 12 am and from 3 pm to 5 pm. The Fund would like to take this opportunity to warmly thank all the persons involved in the Removal.

  9. CERN safety week

    CERN Multimedia

    DG Unit

    2009-01-01

    Following an increase in the number of accidents in 2008, the Safety Commission is organising a CERN safety week from 8 to 12 June for riders of bicycles, scooters and motorbikes. We invite you to take part in the programme, which will be held in the Main Building (Bldg. 500) and will consist of an exhibition, organised events and hands-on activities, including demonstrations of emergency braking, a driving simulator, simulation of what it feels like to drive under the influence of alcohol, demonstrations by the Fire Brigade, video projections, etc. There will also be a number of prizes to be won. Please sign up via your DSO.

  10. Cern Women's Club

    CERN Multimedia

    Club des cernoises

    2013-01-01

    Coffee MorningTuesday 8th October 2013, from 9:00 to 11:00 Bldg 504 (Restaurant No 2 – DSR) 1st Floor, Club Room 3 Presentation of the charity to benefit from the Christmas Sale  “Au Coeur des Grottes”. Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch.

  11. Cern Women's club

    CERN Document Server

    Cern Women's club

    2014-01-01

    Coffee Morning Tuesday 14th October 2014, 9:30 – 11:30 Bldg 504 (Restaurant No 2 – DSR) 1st Floor, Club Room 3 Presentation of the charity to benefit from the Christmas Sale “Les Jardins de Voltaire” Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch/Club-WomensClub/  

  12. CERN Relay Race

    CERN Document Server

    2011-01-01

    The CERN relay race will take place around the Meyrin site on Thursday 19 May starting at 12-15. If possible, please avoid driving on the site during this 20-minute period. If you do meet runners while driving your car, please STOP until they have all passed. Thank you for your cooperation. Details of the course and of how to register your team for the relay race can be found here. Some advice for all runners from the Medical Service can also be found here.   

  13. Michael Frayn visits CERN

    CERN Multimedia

    2007-01-01

    Award-winning playwright and novelist Michael Frayn gave a guest lecture in the main auditorium at CERN on Friday 15 March about his new book The Human Touch: Our Part in the Creation of the Universe. The lecture focused on cosmology and philosophy and the limitations that language places on our ability to understand the creation of a universe in which we seem to play such a small part. In addition to his novels and plays, which include Copenhagen, a play about the 1941 meeting between German physicist Werner Heisenberg and Danish physicist Niels Bohr, Frayn has translated several works from Russian, including plays by Chekhov and Tolstoy.

  14. Superconducting racetrack booster for the ion complex of MEIC

    Energy Technology Data Exchange (ETDEWEB)

    Filatov, Yu [Joint Inst. for Nuclear Research (JINR), Dubna (Russian Federation); Moscow Inst. of Physics and Technology (MIPT), Moscow (Russian Federation); Kondratenko, A. M. [Science and Technique Laboratory ' Zaryad' , 630090, Novosibirsk, Russia; Kondratenko, M. A. [Science and Technique Laboratory ' Zaryad' , 630090, Novosibirsk, Russia; Kovalenko, A. [Joint Inst. for Nuclear Research (JINR), Dubna (Russian Federation); Derbenev, Yaroslav S. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Lin, Fanglei [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Morozov, Vasiliy S. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Zhang, Yuhong [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2016-02-01

    The current design of the Medium-energy Electron-Ion Collider (MEIC) project at Jefferson lab features a single 8 GeV/c figure-8 booster based on super-ferric magnets. Reducing the circumference of the booster by switching to a racetrack design may improve its performance by limiting the space charge effect and lower its cost. We consider problems of preserving proton and deuteron polarizations in a superconducting racetrack booster. We show that using magnets based on hollow high-current NbTi composite superconducting cable similar to those designed at JINR for the Nuclotron guarantees preservation of the ion polarization in a racetrack booster up to 8 GeV/c. The booster operation cycle would be a few seconds that would improve the operating efficiency of the MEIC ion complex.

  15. CERN videonews magazine Nr 2 : December 2002

    CERN Multimedia

    Audiovideo Service

    2002-01-01

    News from :ATRAP experiment's latest achievements. (CERN Bulletin 45/2002) CAST experiment. (CERN Bulletin 35/2002) InDiCo : the European digital conferencing project. (CERN Bulletin 42/2002) CMS : superconducting cable production Diaporama

  16. 2013 CERN Road Race

    CERN Multimedia

    Klaus Hanke

    2013-01-01

    The 2013 edition of the annual CERN Road Race will be held on Wednesday 18 September at 18.15.   The 5.5 km race takes place over 3 laps of a 1.8 km circuit in the West Area of the Meyrin site, and is open to everyone working at CERN and their families. There are runners of all speeds, with times ranging from under 17 to over 34 minutes, and the race is run on a handicap basis, by staggering the starting times so that (in theory) all runners finish together. Children (< 15 years) have their own race over 1 lap of 1.8 km. As usual, there will be a “best family” challenge (judged on best parent + best child). Trophies are awarded in the usual men’s, women’s and veterans’ categories, and there is a challenge for the best age/performance. Every adult will receive a souvenir prize, financed by a registration fee of 10 CHF. Children enter free (each child will receive a medal). More information, and the online entry form, can be found at: htt...

  17. 2013 CERN Road Race

    CERN Multimedia

    Klaus Hanke

    2013-01-01

    The 2013 annual CERN Road Race will be held on Wednesday 18 September at 6.15 p.m.   The 5.5 km race takes place over 3 laps of a 1.8 km circuit in the West Area of the Meyrin site, and is open to everyone working at CERN and their families. There are runners of all speeds, with times ranging from under 17 to over 34 minutes, and the race is run on a handicap basis, by staggering the starting times so that (in theory) all runners finish together. Children (< 15 years) have their own race over 1 lap of 1.8 km. As usual, there will be a “best family” challenge (judged on best parent and best child). Trophies are awarded in the usual men’s, women’s and veterans’ categories, and there is a challenge for the best age/performance. Every adult will receive a souvenir prize, financed by a registration fee of 10 CHF. Children enter free (each child will receive a medal). More information, and the online entry form, can be found here.

  18. What's new @CERN ?

    CERN Multimedia

    CERN video productions

    2011-01-01

    Le 30 mars 2010 – une date désormais gravée dans le marbre – le jour où le LHC, le grand collisionneur de hadrons, soit le plus puissant accélérateur de particules au monde a commencé à fonctionner à des énergies inédites. Depuis, les collisions s’enchainent avec la promesse de découvertes. Dans cette édition de What’s new at CERN?, nous allons faire le bilan des performances de cette machine et parler de son mode d’exploitation qui va changer dans quelques jours. Les mots clés de cette émission ? Performances – expériences – ions - protons - avenir Tout cela en compagnie de Steve Myers, directeur du CERN pour les accélérateurs et la technologie, et de Yves Schutz, physicien de l’expérience ALICE.

  19. CERN honours Carlo Rubbia

    CERN Multimedia

    2009-01-01

    On 7 April CERN will be holding a symposium to mark the 75th birthday of Carlo Rubbia, who shared the 1984 Nobel Prize for Physics with Simon van der Meer for contributions to the discovery of the W and Z bosons, carriers of the weak interaction. Following a presentation by Rolf Heuer, lectures will be given by eminent speakers on areas of science to which Carlo Rubbia has made decisive contributions. Michel Spiro, Director of the French National Institute of Nuclear and Particle Physics (IN2P3) of the CNRS, Lyn Evans, sLHC Project Leader, and Alan Astbury of the TRIUMF Laboratory will talk about the physics of the weak interaction and the discovery of the W and Z bosons. Former CERN Director-General Herwig Schopper will lecture on CERN’s accelerators from LEP to the LHC. Giovanni Bignami, former President of the Italian Space Agency and Professor at the IUSS School for Advanced Studies in Pavia will speak about his work with Carlo Rubbia. Finally, Hans Joachim Sch...

  20. CERN honours Carlo Rubbia

    CERN Multimedia

    2009-01-01

    On 7 April CERN will be holding a symposium to mark the 75th birthday of Carlo Rubbia, who shared the 1984 Nobel Prize for Physics with Simon van der Meer for contributions to the discovery of the W and Z bosons, carriers of the weak interaction. Following a presentation by Rolf Heuer, lectures will be given by eminent speakers on areas of science to which Carlo Rubbia has made decisive contributions. Michel Spiro, Director of the French National Institute of Nuclear and Particle Physics (IN2P3) of the CNRS, Lyn Evans, sLHC Project Leader, and Alan Astbury of the TRIUMF Laboratory will talk about the physics of the weak interaction and the discovery of the W and Z bosons. Former CERN Director-General Herwig Schopper will lecture on CERN’s accelerators from LEP to the LHC. Giovanni Bignami, former President of the Italian Space Agency, will speak about his work with Carlo Rubbia. Finally, Hans Joachim Schellnhuber of the Potsdam Institute for Climate Research and Sven Kul...

  1. Preserving CERN's legacy

    CERN Multimedia

    Antonella Del Rosso

    2015-01-01

    At CERN, scientists from all over the world design and build innovative instruments to be implemented in the cutting-edge machines used in high-energy physics. Those instruments go on to become part of the world’s most powerful accelerators, Nobel-prize-winning detectors, unique antimatter machines, the first web servers… These are historical pieces and belong to our common heritage. But, what happens to them once they are no longer in use?   New endeavours consistently require new technical developments, and the list of “old” objects belonging to a laboratory like CERN increases over time. As innovative as they might have been when they were created, they are often bulky, sometimes very delicate, and do not always look like everyday tools when they are dismantled. How best to deal with them? “A database of objects suitable for scientific exhibitions has been available on CDS for many years,” says Gigi Rolandi, Chair of CER...

  2. EUCYS prizewinner visits CERN

    CERN Multimedia

    Jennifer Toes

    2016-01-01

    Young Turkish student Baris Volkan Gürses visited CERN from 4 to 8 July after winning the prize in the 2015 European Contest for Young Scientists (EUCYS).    Baris Volkan Gürses, EUCYS prizewinner, visiting the Microcosm. After winning both regional and national competitions in Turkey, 18-year-old student Baris Volkan Gürses competed against 169 young scientists and was awarded a visit to CERN by EIROforum for his physics project in EUCYS 2015. His project, entitled “Generation of artificial gravity by using electrostatic force for prevention of muscle atrophy and osteoporosis occurring in gravity-free environments”, focused on the design of a mechanism to help with the impact of spaceflight on the human body. “My objective was to eliminate the negative effects of a gravity-free environment on astronauts who stay in space for longer periods of time, like in the International Space Station,” explained Volkan. &...

  3. CERN Croquet Club

    CERN Multimedia

    Staff Association

    2015-01-01

    CERN Croquet Club plays from April to October on two grass courts, on a par with golf greens, on the Prévessin site, where we have a clubhouse with bar and barbecue facilities. Lawn bowls is also played there. Croquet involves using a long mallet to hit one’s balls through a series of narrow hoops. Accuracy is needed, as well as a grasp of tactics. Games are singles or doubles. We play both Association croquet, the original complex game which requires a fairly long apprenticeship, and Golf croquet, a version which moves along more quickly and is easy to learn. Coaching is provided. Membership is open to anyone, whether CERN employees or not. We organise several internal club competitions, including a monthly mini-league, and members also play in Swiss Championships.  The Swiss team plays a number of international matches each year, at home or away, against England, Scotland, Wales, Italy, Belgium, Austria and Germany. Swiss champions play in the European and World Golf croq...

  4. Lectures for CERN pensioners

    CERN Multimedia

    GS Department

    2009-01-01

    The Medical Service and the CERN and ESO Pensioners Association invite CERN pensioners to a series of presentations given by professors and specialists at the University Teaching Hospitals and the Faculty of Medicine at the University of Geneva on the subject of: PROMOTION OF OPTIMUM BRAIN AGEING The final series of presentations will be held in CERN’s Main Auditorium (Building 500) on: Wednesday, 25 February 2009, from 2:30 p.m. to 4:30 p.m. What is cerebral reserve ? Historique et importance de la notion de «réserve cérébrale» Prof. Ezio GIACOBINI Intervention de la réserve cérébrale sur les troubles de la cognition Prof. Jean-Pierre MICHEL Comment est-il possible d’évaluer la réserve cérébrale ? Prof. Gabriel GOLD Projet de recherche «Optimum Brain Ageing» -\tAspects méthodologiques - Dr François HERRMANN -\tAspects pratiques - Dr Dina ZEKRY The presentations will be given in French with overheads in English and will be followed by a wide-rangi...

  5. Lectures for CERN pensioners

    CERN Multimedia

    GS Department

    2009-01-01

    The Medical Service and the CERN and ESO Pensioners Association invite CERN pensioners to a series of presentations given by professors and specialists at the University Teaching Hospitals and the Faculty of Medicine at the University of Geneva on the subject of: PROMOTION OF OPTIMUM BRAIN AGEING The final presentation will be given in CERN’s Main Auditorium (Building 500) on: Wednesday, 25 February 2009, from 2:30 p.m. to 4:30 p.m. What is cerebral reserve ? Historique et importance de la notion de «réserve cérébrale» - Prof. Ezio GIACOBINI Intervention de la réserve cérébrale sur les troubles de la cognition - Prof. Jean-Pierre MICHEL Comment est-il possible d’évaluer la réserve cérébrale? - Prof. Gabriel GOLD Projet de recherche «Optimum Brain Ageing» - Aspects méthodologiques - Dr François HERRMANN - Aspects pratiques - Dr Dina ZEKRY The presentations will be given in French with overheads in English and will be followed by a wide-ranging disc...

  6. Lectures for CERN pensioners

    CERN Multimedia

    GS Department

    2009-01-01

    The Medical Service and the CERN and ESO Pensioners Association invite CERN pensioners to a series of presentations given by professors and specialists at the University Teaching Hospitals and the Faculty of Medicine at the University of Geneva on the subject of: PROMOTION OF OPTIMUM BRAIN AGEING The final series of presentations will be held in CERN’s Main Auditorium (Building 500) on: Wednesday, 25 February 2009, from 2:30 p.m. to 4:30 p.m. What is cerebral reserve ? Historique et importance de la notion de «réserve cérébrale» Prof. Ezio GIACOBINI Intervention de la réserve cérébrale sur les troubles de la cognition Prof. Jean-Pierre MICHEL Comment est-il possible d’évaluer la réserve cérébrale? Prof. Gabriel GOLD Projet de recherche «Optimum Brain Ageing» - Aspects méthodologiques - Dr François HERRMANN -\tAspects pratiques - Dr Dina ZEKRY The presentations will be given in French with overheads in English and will be followed by a wide-rangin...

  7. Kofi Annan visits CERN

    CERN Multimedia

    Katarina Anthony

    2011-01-01

    On Tuesday 13 September, former Secretary-General of the United Nations and Nobel Peace Laureate Kofi Annan paid a visit to CERN.   Arriving in the early afternoon, Kofi Annan and his family were greeted by Director-General Rolf Heuer on the steps of Building 500. After a quick introduction to the Laboratory, they were whisked off to SM18 for a tour of the LHC’s superconducting magnet test hall, guided by Technology Department Head Frédérick Bordry. After a light lunch in Restaurant 2, Kofi Annan added his signature to CERN’s Guest Book. He is the second UN Secretary-General to add their name to CERN’s roster; his successor Ban Ki-Moon’s visited CERN in 2008.  Kofi Annan was then guided by spokesperson Fabiola Gianotti on a tour of ATLAS’s Visitor Centre. This was an opportunity for some of the younger members of the ATLAS collaboration to meet the former Secretary-General and to answer his questions about the exper...

  8. Bulgarians@cern.ch

    CERN Multimedia

    2000-01-01

    The happy Bulgarian family. From left to right, last row to first row: Ilka Antcheva, Georgi Antchev, Dimitri Borilkov, Ivana Hristova, Petiu Petev, Peicho Petkov, Borislav Pavlov, Peter Hristov, Mihail Tchijov, Stefan Piperov, Ekaterina Ivanova, Dimitar Kolev, Roumen Tzenov. Bobby is striding along with his white sneakers, black trousers belted high at the waist and a blue shirt buttoned up to the top. He comes to the coffee table and sits down on the chair crossing his legs. While speaking he fiddles with his glasses and his black curly hair dangles on the sides of his head. Borislav Pavlov or Bobby is a 22 year old Bulgarian summer Physics student at Sofia University and came to CERN to work on ORCA reconstruction software for the CMS experiment. “I will do my thesis on ORCA and it is so good that I can be here, work here where the projects actually happen and exchange experience with the people working here,” he says. “It is an honor for me.” Bulgaria joined CERN as a member state in 1999 but Bulgar...

  9. By boat to CERN

    CERN Multimedia

    2009-01-01

    Hello, my name is Jordan Juras. I will be here at CERN for a 2-month period spanning mid-June through mid-August working as Student Journalist for The Bulletin. This is a conventional position, but the manner with which I arrived at CERN is quite the opposite. Sitting at work one May 12th morning, I came across a Bulletin article (No. 20-21/2009) while perusing the LHC website. It was advertising ‘Fisica in Barca in Europe 2009’. They were looking for physicists living along the Mediterranean coast between Lisbon and Genoa to help out with the programme. Though I do not hold the title of physicist, nor do I live in Europe (in fact I live just outside of Harrow, Ontario, Canada), I felt compelled to write an email, expressing my love for physics and my interest in helping out with the programme. To my surprise, my help on board was welcome, and I managed to find some discount airfare and I set out for the South of Italy to meet the boat in Bari. Between Bari and Tries...

  10. Steven Weinberg visits CERN

    CERN Multimedia

    2009-01-01

    Steven Weinberg visiting the ATLAS cavern accompanied by Peter JenniIt was no surprise that the CERN audience arrived early in the Globe of Science and Innovation for the colloquium on 7 July. Nobel laureate Steven Weinberg is one of the major contributors to the Standard Model of particle physics. He received the Nobel Prize for Physics in 1979 for his work on the unified theory of the electromagnetic and weak interactions, one of the essential pillars of the Standard Model. After lunch at CERN and a visit to ATLAS, Weinberg gave a colloquium on "The Quantum Theory of Fields: Effective or Fundamental" to a packed audience. In his talk, he looked at how the use of quantum field theory in particle physics has fluctuated in popularity since Paul Dirac first introduced the approach to describe the interaction of particles with electromagnetic fields in the late 1920s. In particular, he posed the question: Is quantum field theory fundamental or does it a...

  11. Italy au CERN

    CERN Multimedia

    FI Department

    2008-01-01

    4 – 6 March 2008 Main Building Bldg 60 - ground and 1st floor 09.00 hrs - 17.30 hrs Nineteen companies will present their latest technology at the "Italy at CERN" exhibition. Italian industry will exhibit products and technologies related to the field of particle physics. The main subjects are civil engineering and buildings, data processing, electrical engineering, electronics, industrial support, mechanical engineering, particle detectors and vacuum and low-temperature technology. The exhibition is being organised by the INFN of Padova. The exhibitors are listed below. More details on the firms can be found at the following link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS Boffetti Impianti S.r.l. Bozzi & Figli S.r.l. C.A.E.N. S.p.A. Cavicel S.p.A. Comecer S.p.A. E.E.I. Elettronica Conduttori S.r.l. Euromec S.r.l. Eurotech S.p.A. IRST Fondazione Bruno Kessler IVG Colbacchini S.p.A. Krohne Italia S.r.l. Luvata For...

  12. ITALY AT CERN

    CERN Multimedia

    FI Department

    2008-01-01

    4 – 6 March 2008 Main Building Bldg 60 - ground and 1st floor 09.00 hrs - 17.30 hrs Nineteen companies will present their latest technology at the "Italy at CERN" exhibition. Italian industry will exhibit products and technologies related to the field of particle physics. The main subjects are civil engineering and buildings, data processing, electrical engineering, electronics, industrial support, mechanical engineering, particle detectors and vacuum and low-temperature technology. The exhibition is being organised by the INFN of Padova. The exhibitors are listed below. More details on the firms can be found at the following link: http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS Boffetti Impianti S.r.l. Bozzi & Figli S.r.l. C.A.E.N. S.p.A. Cavicel S.p.A. Comecer S.p.A. E.E.I. Elettronica Conduttori S.r.l. Euromec S.r.l. Eurotech S.p.A. IRST Fondazione Bruno Kessler IVG Colbacchini S.p.A. Krohne Italia S.r.l. Luvata For...

  13. Italy at CERN

    CERN Multimedia

    Caroline Laignel

    2005-01-01

    15 - 17 November 2005 Main Building Bldg 60 - ground and 1st floor 09:00 - 17:30 Twenty-six companies will present their latest technology at the "Italy at CERN" exhibition. Italian industry will exhibit products and technologies which are related to the field of particle physics.The main subjects are: electrical engineering, electronics, logistics, mechanical engineering, vacuum and low-temperature technology. The exhibition is being organised by the INFN in Padua.The exhibitors are listed below.A detailed programme will be available in due course : from your Departmental secretariat, at the exhibition, on the FI homepage http://fi-dep.web.cern.ch/fi-dep/structure/memberstates/exhibitions_visits.htm LIST OF EXHIBITORS  Ansaldo Superconduttori Spa CAEN Spa CECOM Snc Consorzio Canavese Export CPE Italia Spa Criotec Impianti Srl CTE Sistemi Srl Carpenteria S. Antonio Spa E.E.I. Equipaggiamenti Elettronici Industriali Elettronica Conduttori Srl Goma Elettronica Spa ICAR Spa Intercond Spa Kenotec Srl O...

  14. Thomas Kibble visits CERN

    CERN Multimedia

    Rosaria Marraffino

    2014-01-01

    Emeritus Professor Sir Thomas W.B. Kibble, from Imperial College London visited LHC for the first time last week and delivered a colloquium on the genesis of electroweak unification and the Brout-Englert-Higgs mechanism.   From left to right: Jim Virdee, Tiziano Camporesi, Tom Kibble and Austin Ball on the visit to CMS. On his way back from Trieste, where he received the Abdus Salam International Centre for Theoretical Physics' Dirac Medal, Tom Kibble stopped by CERN for his first visit to the LHC. Kibble had a standing invitation from Jim Virdee, former CMS spokesperson, who is also a researcher from Imperial College London. Peter Jenni (left) and Tom Kibble tour the ATLAS detector. (Image: Erwan Bertrand) Kibble made the trip to CERN a family outing and brought along 14 relatives,  including his children and grandchildren. He visited the ATLAS detector with Peter Jenni, its former spokesperson, on Friday 10 October. In the afternoon, Kibble delivered a colloquium in the...

  15. CERN CINE CLUB

    CERN Multimedia

    CERN CINE CLUB

    2010-01-01

    CERN CINE CLUB Thursday 24 June 2010 at 20:30 / Jeudi 24 Juin 2010 à 20:30 CERN Main Auditorium / Amphithéâtre Principal   The Raggedy Rawney By/de : Bob Hoskins (UK, 1988) - 104 min With/avec: Dexter Fletcher, Bob Hoskins, David Hill, Zoe Nathanson, Zoe Wanamaker Bob Hoskins makes his directorial debut with this lyrical, mystical fable about the strength of family and the transcendence of love. When a young military recruit named Tom goes AWOL after his first taste of battle, he must disguise himself with face paint and women’s clothing to avoid being captured by his vengeful commanding officer. He is instead discovered and taken in by Darky, the leader of an eccentric group of traveling gypsies, who thinks he is a «rawney», a half-mad, half-magical woman who brings good fortune. But when Tom begins a love affair with Darky’s daughter, he sets off a chain reaction of events that will soon put all of their lives in grave ...

  16. CERN@school

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    CERN’s educational programmes have inspired large numbers of physics teachers all over Europe to adopt innovative approaches to teaching.  Becky Parker, a former participant in the High School Teachers (HST) programme, has set up the CERN@school project, in which students are using Medipix chips to study cosmic rays. They have recently designed and are building Lucid, a detector that will be launched into space in 2011.   The LUCID detector designed by the Langton school. Take a school with the declared aim of ‘providing learning experiences which are enjoyable, stimulating and challenging and which encourage critical and innovative thinking’. Add to that a motivated teacher who wants to put it into practice and you have the perfect seeds for growing a new generation of young researchers. Becky Parker came to CERN in 2007. She observed how cutting-edge research is done here and decided to export it to her school. However, she didn’t just go back t...

  17. Monitoring Evolution at CERN

    Science.gov (United States)

    Andrade, P.; Fiorini, B.; Murphy, S.; Pigueiras, L.; Santos, M.

    2015-12-01

    Over the past two years, the operation of the CERN Data Centres went through significant changes with the introduction of new mechanisms for hardware procurement, new services for cloud provisioning and configuration management, among other improvements. These changes resulted in an increase of resources being operated in a more dynamic environment. Today, the CERN Data Centres provide over 11000 multi-core processor servers, 130 PB disk servers, 100 PB tape robots, and 150 high performance tape drives. To cope with these developments, an evolution of the data centre monitoring tools was also required. This modernisation was based on a number of guiding rules: sustain the increase of resources, adapt to the new dynamic nature of the data centres, make monitoring data easier to share, give more flexibility to Service Managers on how they publish and consume monitoring metrics and logs, establish a common repository of monitoring data, optimise the handling of monitoring notifications, and replace the previous toolset by new open source technologies with large adoption and community support. This contribution describes how these improvements were delivered, present the architecture and technologies of the new monitoring tools, and review the experience of its production deployment.

  18. Cern Wowen's Club

    CERN Document Server

    Club des Cernoises

    2014-01-01

    Cern Wowen's Club Coffee Morning Tuesday 11th February 2014, 9:00 – 11:00 Bldg 504 (Restaurant No 2 – DSR) 1st Floor, Club Room 3 Celebration of the 40th Anniversary of the Club   Those interested in helping should come along. New arrivals and all members are cordially invited. You can enrol for membership, renew membership, find out about and sign up for our activities. Visit our website: http://club-womensclub.web.cern.ch/Club-WomensClub/     Club des Cernoises Coffee Morning Mardi  11 février 2014, 9 h. – 11 h. Bât. 504 (Restaurant No 2 – DSR) 1er étage, Salle 3 du Club Célébration du 40ème anniversaire du Club Toutes celles qui désirent nous aider sont les bienvenues. Les nouvelles venues et  tous les membres sont invités au Coffee Morning. Vous pourrez adhérer au Club, renouveler  votre cot...

  19. CERN diabetes awareness days

    CERN Multimedia

    2005-01-01

    Do you have diabetes without knowing it? Following last year's successful campaign, the CERN Infirmary has organised two further diabetes prevention and screening days on 10th & 11th October 2005 from 9am to 4pm (INFIRMARY, Bldg 57, ground floor) open to everyone working on the CERN site who was unable to participate in 2004. Testing of blood pressure, cholesterol and sugar levels, Body Mass Index, etc. Information - documentation - personal and individual advice. Presence of a dietician from 2 p.m. to 4 p.m. In cooperation with the NOVAE, DSR & AVENANCE restaurants. Diabetes is reaching epidemic proportions in many countries and, if not diagnosed sufficiently early, can be a major cause of blindness, heart and kidney disease, etc. Prevention is possible through screening and life-style changes such as improved dietary habits and regular physical exercise. Diabetes is not a serious condition in itself if diagnosed and treated early enough but it can have very serious consequences if und...

  20. CERN Diabetes Awareness Days

    CERN Multimedia

    2005-01-01

    Do you have diabetes without knowing it? Following last year's successful campaign, the CERN Infirmary has organised two further diabetes prevention and screening days on 10th & 11th October 2005 from 9am to 4pm (INFIRMARY, Bldg 57, ground floor) open to everyone working on the CERN site who was unable to participate in 2004. Testing of blood pressure, cholesterol and sugar levels, Body Mass Index, etc. Information - documentation - personal and individual advice. Presence of a dietician from 2 p.m. to 4 p.m. In cooperation with the NOVAE, DSR & AVENANCE restaurants Diabetes is reaching epidemic proportions in many countries and, if not diagnosed sufficiently early, can be a major cause of blindness and of heart and kidney disease, etc. Prevention is possible through screening and life-style changes such as improved dietary habits and regular physical exercise. Diabetes is not a serious condition in itself if it is diagnosed and treated early enough but it can have very serious consequences...

  1. The colours of CERN

    CERN Multimedia

    Laëtitia Pedroso

    2010-01-01

    Would you move into an office painted in a colour you hate? As we all know, taste in colour is individual. Thanks to the establishment of a new Painting Charter, conflicting opinions will be unified.   The four new paint colours established in the Painting Charter. There were many reasons behind the creation of the Painting Charter by the GS SEM Department. Unlike many companies, CERN has not until now regulated which colours can be used inside buildings. With many nationalities passing through CERN, tastes tend to differ: northern countries usually prefer colder colours, while southern countries seem to prefer warm colours. It’s not hard to imagine how quickly we could make a rainbow! In addition, whenever an office needs to be repainted, it can be difficult to find exactly the same colour. This results in entire walls being repainted, which increases the cost. If – by chance – the original colour is found, it could be out of stock. While ...

  2. CERN Yachting club

    CERN Document Server

    CERN Yachting club

    2015-01-01

    Surely among the most active sports clubs within CERN, the Yachting Club has had a steadily increasing membership over a decade; it is now around 350 but new members are always welcome, especially now at the beginning of a season. Indeed, with the Lottery for places in courses which are one of our highlights, membership has jumped since mid-March. The Lottery is always heavily oversubscribed, which we like to think represents its good reputation for quality of teaching and good fun at the same time. Now those lucky new students are in contact with their teachers, will be buying wetsuits in some cases (dinghy and catamaran courses), joining us for the launch of the fleet (see calendar on website at http://yachting.web.cern.ch/yachting/ycc_home.html ) and  – in many cases – learning sailing as complete beginners. Those Lottery-unlucky can still plan a fun season, with our Thursday Practice evenings, where we can almost always place everyone on a boat for an outing.   ...

  3. Celebrating diversity at CERN

    CERN Multimedia

    2014-01-01

    With international women’s day coming up on 8 March, along with the recent appointment of a new Diversity Programme Leader, it seems timely to take a look at how far we’ve come over recent years in promoting gender equality at CERN. In short, the news is good, but we still have some way to travel.   CERN does not have a policy of positive discrimination, but rather one of presenting a level playing field. We work to ensure, for example, that the diversity of candidates presented for interview reflects the diversity of applicants. It’s an approach that is having the desired effect. Overall, the percentage of female staff members has risen from 17% to 20% over the last decade, with parity being achieved among professional administrators and significant advances being made among research and applied physicists, engineers and technicians. At recruitment, our approach is working: we’re managing to attract growing numbers of women. This brings us to the phen...

  4. CERN in "Nature"

    CERN Multimedia

    CERN Bulletin

    2013-01-01

    CERN is nestled within a verdant natural environment which, thanks to a conservation-oriented policy, is characterized by a remarkable biodiversity. The continued protection of that diversity calls for thoughtful, carefully planned measures.   CERN’s site is an extensive one: its 650 hectares include 210 hectares of buildings, roadways and parking lots, 100 hectares of fenced-off green area, and 340 hectares of non-fenced land, a patchwork of fields, woods and pasture. This land teems with a great variety of plants and animals, including some rare and unexpected species. In 2009 CERN received a certificate from the Swiss foundation Nature & économie for the Meyrin site, and the award was renewed in 2012 for three more years. “The green spaces inside the fenced area are tended by six ISS gardeners, whose duties also include keeping the sidewalks and footpaths clear of snow in winter. The Meyrin site also includes orchid sanctuaries, meadows and sheep pasture...

  5. Kayak CERN Club

    CERN Multimedia

    Kayak CERN Club

    2014-01-01

                            Canoë Kayak CERN (CKC) Mikko Karppinen Vainqueur de la Maxi Kayak Pour la première édition de la course maxi kayak d’Annecy dimanche 1er juin, organisée par l’association Kayak sans Frontières, trois membres du Canoë Kayak CERN prenaient le départ de la boucle de 34kms autour du lac, Nicolas Roget qui après 23kms d’effort dû abandonner suite à plusieurs dessalages dans la partie la plus mouvementée du lac, René Dague franchissait la ligne d’arrivée après 3h15 de course se classant à la 10ème place juste devant l’ancien champion du monde de slalom Jacques Calori...

  6. CERN Record Club

    CERN Multimedia

    CERN Record club

    2015-01-01

    Over 2000 DVDs Now Available If you were a member last year, please come along and renew your membership for just 20.- and check out the latest additions, the list is at http://crc.web.cern.ch/crc/public/disc.php?action=search&month=2015/01. If you are not a member, why not come along and have a look, we now have over 2000 DVDs on display covering Action films, Suspense, Drama, Comedy, Sci fi and Childrens. The full catalogue can be consulted at http://cern.ch/crc and for 20.- membership you have access to all of them. There is also a CD selection, Classical music, Jazz and popular; it is not on display but the catalogue is online and you can select what you want and come to the club to collect it. We are open from 12:30 to 13:00 on Mondays, Wednesdays and Fridays and the Club Room is in Restaurant 2, Building 504, near the UBS ATM. We look forward to seeing you.

  7. GERMANY AT CERN

    CERN Multimedia

    2001-01-01

    13 - 15 November 2001 Administration Building Bldg 60 - ground and 1st floor 09.00 hrs - 17.30 hrs OPENING CEREMONY 10h00 - 13 November GERMANY AT CERN Thirty-three German companies will be demonstrating their supplies and services offered for the construction of the Large Hadron Collider (LHC) and other key CERN programmes. The Industrial exhibition will be enriched with a display of objects of contemporary German art. The official German presentation is under the patronage of the Federal Minister of Education and Research (BMBF), Bonn. There follows : the list of exhibitors, the list of lectures to be given at the exhibition. A detailed programme will be available in due course at : your Divisional Secretariat, the Reception information desk, building 33, the exhibition. LIST OF EXHIBITORS Accel Instruments GmbH Representative: 1.1 Accel Instruments GmbH/CH-8754 Netsal apra-norm Elektromechanik GmbH Representative: 2.1 apra-norm s.n.c./F-67500 Haguenau Babcock Noell Nuclear GmbH Balcke-D&u...

  8. CERN apprentice receives award

    CERN Multimedia

    2008-01-01

    Another CERN apprentice has received an award for the quality of his work. Stéphane Küng (centre), at the UIG ceremony last November, presided over by Geneva State Councillor Pierre-François Unger, Head of the Department of Economics and Health. Electronics technician Stéphane Küng was honoured in November by the Social Foundation of the Union Industrielle Genevoise (UIG) as one of Geneva’s eight best apprentices in the field of mechatronics. The 20-year-old Genevan obtained his Federal apprentice’s certificate (Certificat fédéral de capacité - CFC) in June 2007, achieving excellent marks in his written tests at the Centre d’Enseignement Professionnel Technique et Artisanal (CEPTA). Like more than 200 youngsters before him, Stéphane Küng spent part of his four-year sandwich course working at CERN, where he followed many practical training courses and gained valuable hands-on experience in various technical groups and labs. "It’ always very gr...

  9. Disk storage at CERN

    CERN Document Server

    Mascetti, L; Chan, B; Espinal, X; Fiorot, A; Labrador, H Gonz; Iven, J; Lamanna, M; Presti, G Lo; Mościcki, JT; Peters, AJ; Ponce, S; Rousseau, H; van der Ster, D

    2015-01-01

    CERN IT DSS operates the main storage resources for data taking and physics analysis mainly via three system: AFS, CASTOR and EOS. The total usable space available on disk for users is about 100 PB (with relative ratios 1:20:120). EOS actively uses the two CERN Tier0 centres (Meyrin and Wigner) with 50:50 ratio. IT DSS also provide sizeable on-demand resources for IT services most notably OpenStack and NFS-based clients: this is provided by a Ceph infrastructure (3 PB) and few proprietary servers (NetApp). We will describe our operational experience and recent changes to these systems with special emphasis to the present usages for LHC data taking, the convergence to commodity hardware (nodes with 200-TB each with optional SSD) shared across all services. We also describe our experience in coupling commodity and home-grown solution (e.g. CERNBox integration in EOS, Ceph disk pools for AFS, CASTOR and NFS) and finally the future evolution of these systems for WLCG and beyond.

  10. France at CERN

    CERN Multimedia

    GS Department

    2010-01-01

    Industrial Exhibition Administration Building Bldg 61 Tuesday 8 June: 9 a.m. – 5.30 p.m. Wednesday 9 June: 9 a.m. – 4 p.m. “FRANCE AT CERN” – INDUSTRIAL EXHIBITION Thirty-six French companies are presenting their latest technological advances during the industrial exhibition "France at CERN", featuring products and technologies specifically related to the activities of the CERN facility. Presenting their know-how in electric vehicles, PSA - PEUGEOT/CITROEN are sponsoring the event. Seminars will be hold in the Main Building’s conference rooms: R&D innovation strategy in Pôle Nucléaire Bourgogne (08/06/2010 – 13h) MU by Peugeot (08/06/2010 – 14h) Citroën (08/06/2010 – 15h) « Elément 14 » : a unique design engineer community for sharing Electronic Engineering Solutions (09/06/2010 – 11h) Individual B2B meetin...

  11. New auditorium for CERN

    CERN Multimedia

    Laëtitia Pedroso

    2010-01-01

    Since September 2009 the PH and GS Departments have been working very closely together on the renovation project for Building 222. The building is now being transformed into an auditorium with a seating capacity of 200. Work began on 15 November 2009 and will be completed just in time for the first conferences.   The conference room in B222 a few days ago. After 20 years as premises for the filtering and purification of CERN's drinking water and three years as a hall for the reception tests and testing of electronic equipment for the LHC experiments, Building 222 is about to get another new lease of life. Only the Main Auditorium and the Globe have seating capacities in excess of 200 at CERN. “The problem of the lack of conference rooms with such a seating capacity was raised at the end of 2008 by the PH Department, which proposed this idea. The project was entrusted to the GS Department in 2009,” explains Barthélemy Gossuin, an engineer in the GS Department who is...

  12. Disk storage at CERN

    Science.gov (United States)

    Mascetti, L.; Cano, E.; Chan, B.; Espinal, X.; Fiorot, A.; González Labrador, H.; Iven, J.; Lamanna, M.; Lo Presti, G.; Mościcki, JT; Peters, AJ; Ponce, S.; Rousseau, H.; van der Ster, D.

    2015-12-01

    CERN IT DSS operates the main storage resources for data taking and physics analysis mainly via three system: AFS, CASTOR and EOS. The total usable space available on disk for users is about 100 PB (with relative ratios 1:20:120). EOS actively uses the two CERN Tier0 centres (Meyrin and Wigner) with 50:50 ratio. IT DSS also provide sizeable on-demand resources for IT services most notably OpenStack and NFS-based clients: this is provided by a Ceph infrastructure (3 PB) and few proprietary servers (NetApp). We will describe our operational experience and recent changes to these systems with special emphasis to the present usages for LHC data taking, the convergence to commodity hardware (nodes with 200-TB each with optional SSD) shared across all services. We also describe our experience in coupling commodity and home-grown solution (e.g. CERNBox integration in EOS, Ceph disk pools for AFS, CASTOR and NFS) and finally the future evolution of these systems for WLCG and beyond.

  13. Industrial services at CERN

    CERN Multimedia

    2002-01-01

    The Bulletin looks at industrial services contracts and the real impact of the cost reductions at CERN. The level of industrial services contracts varies from one phase to another. For example, during the dismantling of LEP (photo) it rose substiantially to fall again at the end of dismantling. Industrial services contracts are an important resource for CERN. The level and nature of such contracts changes according to the phase of operation of the Laboratory. A construction phase, as for the LHC, requires a higher level of industrial services contracts compared with a period of normal running. During the operation of LEP, industrial services contracts were thus maintained at a level of 120 MCHF per year. The level rose to 156 MCHF in 2001 to include contracts awarded for dismantling LEP, and fell to about 144 MCHF in 2002 when the dismantling was complete. During the whole LHC construction period, up to 2007, industrial services spending will be stable in the range 135-140 MCHF per year. For the running pe...

  14. Austria @ CERN: A Happy Ending!

    CERN Multimedia

    Association du personnel

    2009-01-01

    7 May 2009: the Austrian Minister for Science announces the end of his country’s collaboration with CERN in the near future. 18 May 2009: the Austrian Chancellor declares that his country will not leave CERN. Between these two dates, people inside and outside the Laboratory and, in particular, the Management and President of Council, were very active.

  15. CERN at the Post Office

    CERN Multimedia

    2006-01-01

    In collaboration with CERN and the Conseil général de l'Ain, the French postal services of the Pays de Gex have released a new set of pre-paid envelopes paying tribute to CERN. The envelopes, which come in packets of ten, each featuring a different aspect of CERN, will be on sale from 6 June onwards. They will be available from five post offices in the Pays de Gex (Ferney-Voltaire, Prévessin-Moëns, Saint-Genis-Pouilly, Thoiry and CERN-Prévessin), as well as from the CERN Shop (Reception, Building 33). The envelopes were unveiled at an official ceremony on 23 May, which was attended by Jocelyne Boch, Vice-President of the Conseil général de l'Ain and Mayoress of Thoiry, as well as Marina Combe, Head of the Saint-Genis-Pouilly, Thoiry and CERN-Prévessin post offices, and Maximilian Metzger, CERN's Secretary-General. The last set of envelopes to feature CERN, which commemorated the Laboratory's 50th anniversary in 2004, were a huge success, with sales totalling 35 000 in less than a year. 'We received...

  16. CERN internal communication is evolving

    CERN Document Server

    2016-01-01

    CERN news will now be regularly updated on the CERN People page (see here).      Dear readers, All over the world, communication is becoming increasingly instantaneous, with news published in real time on websites and social networks. In order to keep pace with these changes, CERN's internal communication is evolving too. From now on, you will be informed of what’s happening at CERN more often via the “CERN people” page, which will frequently be updated with news. The Bulletin is following this trend too: twice a month, we will compile the most important articles published on the CERN site, with a brand-new layout. You will receive an e-mail every two weeks as soon as this new form of the Bulletin is available. If you have interesting news or stories to share, tell us about them through the form at: https://communications.web.cern.ch/got-story-cern-website​. You can also find out about news from CERN in real time...

  17. Cooperation between CERN and ITER

    CERN Multimedia

    CERN Audiovisual Service

    2008-01-01

    CERN and the International Fusion Organisation ITER have just signed a first cooperation agreeement. The Director-General of the International Fusion Energy Organization, Mr Kaname Ikeda, and CERN Director-General, Robert Aymar, signed a cooperation agreement at a meeting on the Meyrin site on Thursday 6 March.

  18. News regarding Mobility at CERN

    CERN Document Server

    2016-01-01

    CERN Bikes CERN owns a fleet of more than 500 bikes, managed by the Mobility Centre (bdg. 6167). Members of CERN personnel (MPE and MPA) can use these free of charge during work-related activities at CERN (a security deposit is requested). Between 1st of June to 30th September anyone, except Summer Students, who wish to benefit from this service shall pay 1 CHF per day. As from the 1st of August, the CERN bike rental requests are done via the Service Now (SNOW) Portal. For more information, please consult: http://cern.ch/bike-rental.   CERN Cars More than 60 vehicles are available for rent by members of personnel (MPE and MPA) at the Mobility Center (bdg. 6167). As from the 5th of September you can submit reservation requests via the new EDH Car Rental Request document. As a reminder, the Terms of Use are the following: Operational Circular n° 4 (rev.1), governing the use of CERN vehicles;   Any use of the service must be authorised by the concerned Head of Department or Team Leader...

  19. CERN Diversity Newsletter - July 2015

    CERN Document Server

    Kaltenhauser, Kristin; CERN. Geneva. HR Department

    2015-01-01

    The first official edition of the CERN Diversity Newsletter, informing on recent and ongoing diversity activities, and interesting reads, videos and other links related to diversity. Subscribe here: https://diversity.web.cern.ch/2015/07/subscribe-diversity-newsletter

  20. Bulgarians sue CERN for leniency

    CERN Multimedia

    König, R

    2001-01-01

    Bulgaria is appealing to CERN to drastically reduce its contribution to CERN for the next two years. The NATO bombing campaign against Yugoslavia in 1999 destroyed enough bridges on the river Danube to cripple commerce between Bulgaria and Western Europe, damaging the economy and squeezing the government's budget (1/2 page).

  1. CERN neutrino project on target

    CERN Multimedia

    2005-01-01

    Scientists at CERN announced the completion of the target assembly for the CERN neutrinos to Gran Sasso project, CNGS. On schedule for start-up in May 2006, CNGS will send a beam of neutrinos through the Earth to the Gran Sasso laboratory 730 km away in Italy in a bid to unravel the mysteries of nature's most elusive particles (½ page)

  2. Cern-Grid besteht Belastungsprobe

    CERN Multimedia

    2005-01-01

    In the European Center for Nuclear Research, CERN, in Geneva the Grid Computing infrastructure's building took a further hurdle: between CERN and seven Research Centers around the World, during 10 days, a continuous flow of about 600 MByte was achieved (¼ page)

  3. Developers@CERN Forums: Python

    CERN Document Server

    CERN. Geneva

    2016-01-01

    The Developers@CERN Forums second edition took place at the end of May on the topic of Python. How do developers at CERN interact with Python? Which cutting-edge projects are using Python? What were the highlights of this most recent forum?

  4. Council celebrates CERN Control Centre

    CERN Multimedia

    2006-01-01

    With the unveiling of its new sign, the CERN Control Centre was officially inaugurated on Thursday 16 March. To celebrate its startup, CERN Council members visited the sleek centre, a futuristic-looking room filled with a multitude of monitoring screens.

  5. The CERN antiproton collector

    International Nuclear Information System (INIS)

    The Antiproton Collector is a new ring of much larger acceptance than the present accumulator. It is designed to receive 108 antiprotons per PS cycle. In order to be compatible with the Antiproton Accumulator, the momentum spread and the emittances are reduced from 6% to 0.2% and from 200 π mm mrad to 25 π mm mrad respectively. In addition to the ring itself, the new target area and the modifications to the stochastic systems of the Antiproton Accumulator are described. (orig.)

  6. The beam coupling impedance model of CERN Proton Synchrotron

    CERN Document Server

    Persichelli, Serena; Migliorati, Mauro; Salvant, Benoit

    The research activity described in this thesis work is dedicated to developing a longitudinal and a transverse beam coupling impedance model for the CERN Proton Synchrotron (PS), in the framework of the Large Hadron Collider (LHC) Injector Upgrade (LIU) project. The study allows a better understanding of the instability threshold of the machine, helping predicting the effects of the current increase planned for the upgrade program. Furthermore, the knowledge of the machine beam coupling impedance model allows improving the stability of beams injected into the LHC chain, in prevision for the particle collision energy increase in program for LHC physics experiments.

  7. Booster Vaccination: The Role of Reduced Antigen Content Vaccines as a Preschool Booster

    Directory of Open Access Journals (Sweden)

    Giovanni Gabutti

    2014-01-01

    Full Text Available The need for boosters for tetanus, diphtheria, pertussis, and polio, starting from preschool age, is related to the waning immune protection conferred by vaccination, the elimination/reduction of natural boosters due to large-scale immunization programs, and the possibility of reintroduction of wild agents from endemic areas. Taking into account the relevance of safety/tolerability in the compliance with vaccination among the population, it have been assessed whether today enough scientific evidences are available to support the use of dTap-IPV booster in preschool age. The review of the literature was conducted using the PubMed search engine. A total of 41 works has been selected; besides, the documentation produced by the World Health Organization, the European Centre for Disease Control, and the Italian Ministry of Health has been consulted. Many recent papers confirm the opportunity to use a low antigenic dose vaccine starting from 4 to 6 years of age. There is also evidence that 10 years after immunization the rate of seroprotected subjects against diphtheria does not differ significantly between those vaccinated with paediatric dose (DTaP or reduced dose (dTaP or dTap product. The dTpa vaccine is highly immunogenic for diphtheria toxoids regardless of prior vaccination history (2 + 1 and 3 + 1 schedules.

  8. Beam dynamics with new booster dipoles

    International Nuclear Information System (INIS)

    New bending magnets are being designed for the booster synchrotron at RRCAT, Indore with the same effective length and field which will be installed in the existing ring with the same configuration of drifts and quadrupole magnets. Presently sector type dipoles are in use. It is easier to fabricate parallel edge (rectangular type) dipoles but the beam optics gets modified due to edges which provide additional focusing. The effect on tune point can be corrected using two quadrupole families. Studies indicate that the beam emittance is lower in the optics with rectangular type dipoles but the beam injection and extraction are more difficult. In this paper, the beam optics, beam emittance, injection and extraction with two configurations of the dipole magnets are compared. (author)

  9. Ocean recovery of Shuttle Solid Rocket Boosters.

    Science.gov (United States)

    Junker, L. J.

    1973-01-01

    Cost effective recovery of the expended Space-Shuttle Solid Rocket Boosters (SRB) from the ocean will result in significant overall cost savings to the Space Shuttle Program. The ocean recovery mission begins with the dispatching of the recovery team to the predicted splashdown area. The SRBs, drogue parachutes and main parachutes must be tracked, located, retrieved, and transported to land where they will be refurbished and recycled for reuse. Trade studies to be conducted will consider the recovery mission requirements and weigh the advantages, disadvantages and costs of various candidate recovery systems. Major parameters effecting the selection of the final system will ensure that the system will meet overall objectives. Large- and small-scale SRB model testing has been conducted to establish characteristics of SRBs during water entry, floating free and under tow.

  10. Power flow control using quadrature boosters

    Science.gov (United States)

    Sadanandan, Sandeep N.

    A power system that can be controlled within security constraints would be an advantage to power planners and real-time operators. Controlling flows can lessen reliability issues such as thermal limit violations, power stability problems, and/or voltage stability conditions. Control of flows can also mitigate market issues by reducing congestion on some lines and rerouting power to less loaded lines or onto preferable paths. In the traditional control of power flows, phase shifters are often used. More advanced methods include using Flexible AC Transmission System (FACTS) Controllers. Some examples include Thyristor Controlled Series Capacitors, Synchronous Series Static Compensators, and Unified Power Flow Controllers. Quadrature Boosters (QBs) have similar structures to phase-shifters, but allow for higher voltage magnitude during real power flow control. In comparison with other FACTS controllers QBs are not as complex and not as expensive. The present study proposes to use QBs to control power flows on a power system. With the inclusion of QBs, real power flows can be controlled to desired scheduled values. In this thesis, the linearized power flow equations used for power flow analysis were modified for the control problem. This included modifying the Jacobian matrix, the power error vector, and calculating the voltage injected by the quadrature booster for the scheduled real power flow. Two scenarios were examined using the proposed power flow control method. First, the power flow in a line in a 5-bus system was modified with a QB using the method developed in this thesis. Simulation was carried out using Matlab. Second, the method was applied to a 30-bus system and then to a 118-bus system using several QBs. In all the cases, the calculated values of the QB voltages led to desired power flows in the designated line.

  11. Rf beam control for the AGS Booster

    Energy Technology Data Exchange (ETDEWEB)

    Brennan, J.M.

    1994-09-26

    RF beam control systems for hadron synchrotrons have evolved over the past three decades into an essentially standard design. The key difference between hadron and lepton machines is the absence of radiation damping and existence of significant frequency variation in the case of hadrons. Although the motion of the hadron in the potential well of the rf wave is inherently stable it is not strongly damped. Damping must be provided by electronic feedback through the accelerating system. This feedback is typically called the phase loop. The technology of the rf beam control system for the AGS Booster synchrotron is described. First, the overall philosophy of the design is explained in terms of a conventional servo system that regulates the beam horizontal position in the vacuum chamber. The concept of beam transfer functions is fundamental to the mathematics of the design process and is reviewed. The beam transfer functions required for this design are derived from first principles. An overview of the beam signal pick-ups and high level rf equipment is given. The major subsystems, the frequency program, the heterodyne system, and beam feedback loops, are described in detail. Beyond accelerating the beam, the rf system must also synchronize the bunches in the Booster to the buckets in the AGS before transfer. The technical challenge in this process is heightened by the need to accomplish synchronization while the frequency is still changing. Details of the synchronization system are given. This report is intended to serve two purposes. One is to document the hardware and performance of the systems that have been built. The other is to serve as a tutorial vehicle from which the non-expert can not only learn the details of this system but also learn the principles of beam control that have led to the particular design choices made.

  12. CERN's new microcosm exhibition is now open

    CERN Document Server

    2016-01-01

    After a major revamp in 2015, CERN’s microcosm exhibition is once again open to visitors. The exhibition is free and open to all without reservation and visitors are encouraged to share their #microcosm @CERN experiences on social media. Read more: http://cern.ch/go/7HWC -Producer- CERN Video Productions -Director- Kate Kahle -Camera- indissoluble.com and Julien Ordan -Editor- Julien Ordan -Infography- Daniel Dominguez Noemi Caraban -Music- “Light Years” by Stellardrone http://freemusicarchive.org/music/Ste... You can follow us on: cern.ch youtube.com/cerntv google.com/+CERN facebook.com/cern twitter.com/cern/ linkedin.com/company/cern instagram.com/cern Copyright © 2016 CERN. Terms of use: http://copyright.web.cern.ch/

  13. CSR studies for transfer line-2 at CTF3, CERN

    International Nuclear Information System (INIS)

    A transfer line with ability to compress the electron beam bunch length has been designed for CTF3 project at CERN. This line compresses bunch length from 8.3 ps to 1.5 ps with a wide tuning range of longitudinal dispersion R56 from -0.25 m to +0.25 m. In entire range of tuning second order longitudinal dispersion T566 is suppressed and transverse beam emittance dilution is kept below ∼ 10%. But at shorter bunch length, the emitted synchrotron radiation becomes coherent and thus can increase the bunch length and can dilute the transverse emittance. A study is carried out to quantify the effect of CSR on bunch length and emittance in entire range of tuning for this line and no any major detrimental effects of CSR are seen. (author)

  14. Working point and resonance studies at the CERN Proton Synchrotron

    CERN Document Server

    Huschauer, Alexander; Steerenberg, Rende

    The Proton Synchrotron (PS) is the oldest yet the most versatile particle accelerator operating at CERN. Having accelerated a multitude of different particle species within the last five decades, it is today used to define the longitudinal structure of the proton beams going into collision in the Large Hadron Collider (LHC), and thus constitutes an integral part of the LHC injector chain. Around 2020 the LHC will be subject to an upgrade to significantly increase the number of collisions at the interaction points. The beam parameters demanded by the High Luminosity LHC (HL-LHC) will, as a result, require substantial improvements of the pre-accelerators, which are currently being studied within the LHC Injectors Upgrade (LIU) project. The increase of luminosity will be accompanied by an increase of beam intensity, which might result in instabilities appearing on the injection flat bottom of the PS. Transverse Head-Tail instabilities have already been observed on operational LHC beams and an alternative stabili...

  15. Transverse beam coupling impedance of the CERN Proton Synchrotron

    Science.gov (United States)

    Persichelli, S.; Migliorati, M.; Biancacci, N.; Gilardoni, S.; Metral, E.; Salvant, B.

    2016-04-01

    Beam coupling impedance is a fundamental parameter to characterize the electromagnetic interaction of a particle beam with the surrounding environment. Synchrotron machine performances are critically affected by instabilities and collective effects triggered by beam coupling impedance. In particular, transverse beam coupling impedance is expected to impact beam dynamics of the CERN Proton Synchrotron (PS), since a significant increase in beam intensity is foreseen within the framework of the LHC Injectors Upgrade (LIU) project. In this paper we describe the study of the transverse beam coupling impedance of the PS, taking into account the main sources of geometrical impedance and the contribution of indirect space charge at different energies. The total machine impedance budget, determined from beam-based dedicated machine measurement sessions, is also discussed and compared with the theoretical model.

  16. France at CERN

    CERN Document Server

    2003-01-01

    From 23 to 25 September 2003 Administration Building Bldg 60/61 - ground and 1st floor 09.30 hrs - 17.30 hrs Twenty five companies will present their latest technology at the "France at CERN" exhibition. The French industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: electrical engineering, electronics, computer data processing, mechanical engineering, vacuum & low temperatures technologies, particles detectors and civil engineering. The exhibition is organised by UBIFRANCE, the French Committee for Trade Events Abroad. There follows : - the list of exhibitors. A detailed programme will be available in due course at : - your Divisional secretariat, - the reception information desk, Building 33, - the exhibition. A web page is available under the following link: http://www.lafranceaucern.com LIST OF EXHIBITORS 1 Air Liquide14 Nicomatic 2 ATI Electronique15 Photonis 3 ATIM16 Positronic industries SAS 4 ATOS17 Qu...

  17. France at CERN

    CERN Multimedia

    2003-01-01

    From 23 to 25 September 2003 Administration Building Bldg 60/61 - ground and 1st floor 09.30 hrs - 17.30 hrs Twenty five companies will present their latest technology at the "France at CERN" exhibition. The French industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: electrical engineering, electronics, computer data processing, mechanical engineering, vacuum & low temperatures technologies, particles detectors and civil engineering. The exhibition is organised by UBIFRANCE, the French Committee for Trade Events Abroad. There follows : - the list of exhibitors. A detailed programme will be available in due course at : - your Divisional secretariat, - the reception information desk, Building 33, - the exhibition. A web page is available under the following link: http://www.lafranceaucern.com LIST OF EXHIBITORS 1 Air Liquide 14 Nicomatic 2 ATI Electronique 15 Photonis 3 ATIM 16 Positronic industries SAS 4 ATOS 17 Quantel 5 AXON 18 Ra...

  18. France at CERN

    CERN Multimedia

    2003-01-01

    From 22 to 25 September 2003 Administration Building Bldg 60/61 - ground and 1st floor 09.30 hrs - 17.30 hrs Twenty five companies will present their latest technology at the "France at CERN" exhibition. The French industry will exhibit products and technologies which are related to the field of particle physics. The main subjects are: electrical engineering, electronics, computer data processing, mechanical engineering, vacuum & low temperatures technologies, particles detectors and civil engineering. The exhibition is organised by UBIFRANCE, the French Committee for Trade Events Abroad. Please find below: - the list of exhibitors. A detailed programme will be available in due course at : - your Divisional secretariat, - the reception information desk, Building 33, - the exhibition. LIST OF EXHIBITORS 1 Air Liquide14 Nicomatic 2 ATI Electronique15 Photonis 3 ATIM16 Positronic industries SAS 4 ATOS17 Quantel 5 AXON18 Radiospares 6 Cedrat Technologies19 Rexor 7 CIAT20 SDS Service &...

  19. Fermi comes to CERN

    CERN Multimedia

    2009-01-01

    In only 10 months of scientific activity, the Fermi space observatory has already collected an unprecedented wealth of information on some of the most amazing objects in the sky. In a recent talk at CERN, Luca Latronico, a member of the Fermi collaboration, explained some of their findings and emphasized the strong links between High Energy Physics (HEP) and High Energy Astrophysics (HEA). The Fermi gamma-ray telescope was launched by NASA in June 2008. After about two months of commissioning it started sending significant data back to the Earth. Since then, it has made observations that are changing our view of the sky: from discovering a whole new set of pulsars, the greatest total energy gamma-ray burst ever, to detecting an unexplained abundance of high-energy electrons that could be a signature of dark matter, to producing a uniquely rich and high definition sky map in gamma-rays. The high performance of the instrument comes as ...

  20. CERN printing infrastructure

    CERN Document Server

    Otto, R

    2008-01-01

    For many years CERN had a very sophisticated print server infrastructure [13] which supported several different protocols (AppleTalk, IPX and TCP/IP) and many different printing standards. Today's situation differs a lot: we have a much more homogenous network infrastructure, where TCP/IP is used everywhere and we have less printer models, which almost all work using current standards (i.e. they all provide PostScript drivers). This change gave us the possibility to review the printing architecture aiming at simplifying the infrastructure in order to achieve full automation of the service. The new infrastructure offers both: LPD service exposing print queues to Linux and Mac OS X computers and native printing for Windows based clients. The printer driver distribution is automatic and native on Windows and automated by custom mechanisms on Linux, where the appropriate Foomatic drivers are configured. Also the process of printer registration and queue creation is completely automated following the printer regis...