Assessment of Individual Doses and Intervention Planning at CERN

International Nuclear Information System (INIS)

Brugger, M.; Forkel-Wirth, D.; Gaborit, J.C.; Menzel, H.; Roesler, S.; Vincke, H.

2006-01-01

Founded in 1954, CERN is the European Organization for Nuclear Research, one of the world's largest international particle physics centres. It sits astride the Franco-Swiss border near Geneva. The Large Hadron Collider (Lhc) is currently being installed in a 27-kilometer ring tunnel, buried deep below the countryside on the outskirts of Geneva, Switzerland and the Pays de Gex, France. When its operation begins in 2007, the Lhc will be the world's most powerful particle accelerator. The start-up and the operation of the Lhc will mark a new era for CERN's operational radiation protection. The total surface of CERN's radiation areas will enlarge significantly and a large number of work places have to be regularly monitored by CERN's radiation protection group. The maintenance personnel will comprise CERN staff, outside contractors and a large number of physicists from all over the world. CERN meets this challenge by applying optimisation processes already in the design of accelerator and detector components and by an appropriate intervention and dose planning during operation. Detailed Monte Carlo calculations were performed during the design phase of the Lhc and were used to identify the potential radiation hazards during future maintenance in areas with elevated beam losses (accelerator ejection and injection, beam dumps, target areas or beam cleaning insertions) and thus elevated dose rates. In an iterative way, the design of the accelerator components and the layout of these regions were optimised. The impact of the proposed modifications on the dose to personnel was evaluated by Monte Carlo simulations. Calculated individual and collective doses were then compared to design constraints. (authors)

CERN radiation protection (RP) calibration facilities

Energy Technology Data Exchange (ETDEWEB)

Pozzi, Fabio

2016-04-14

Radiation protection calibration facilities are essential to ensure the correct operation of radiation protection instrumentation. Calibrations are performed in specific radiation fields according to the type of instrument to be calibrated: neutrons, photons, X-rays, beta and alpha particles. Some of the instruments are also tested in mixed radiation fields as often encountered close to high-energy particle accelerators. Moreover, calibration facilities are of great importance to evaluate the performance of prototype detectors; testing and measuring the response of a prototype detector to well-known and -characterized radiation fields contributes to improving and optimizing its design and capabilities. The CERN Radiation Protection group is in charge of performing the regular calibrations of all CERN radiation protection devices; these include operational and passive dosimeters, neutron and photon survey-meters, and fixed radiation detectors to monitor the ambient dose equivalent, H*(10), inside CERN accelerators and at the CERN borders. A new state-of-the-art radiation protection calibration facility was designed, constructed and commissioned following the related ISO recommendations to replace the previous ageing (more than 30 years old) laboratory. In fact, the new laboratory aims also at the official accreditation according to the ISO standards in order to be able to release certified calibrations. Four radiation fields are provided: neutrons, photons and beta sources and an X-ray generator. Its construction did not only involve a pure civil engineering work; many radiation protection studies were performed to provide a facility that could answer the CERN calibration needs and fulfill all related safety requirements. Monte Carlo simulations have been confirmed to be a valuable tool for the optimization of the building design, the radiation protection aspects, e.g. shielding, and, as consequence, the overall cost. After the source and irradiator installation

Experience within the CERN Civil Engineering Group with Outsourced Design Services

CERN Document Server

Watson, T

1998-01-01

In April 1996, CERN awarded three contracts for civil engineering design services associated with the LHC project. The three contracts were awarded to three different joint ventures of firms from five member states. The total bid price for these services was in excess of 35 MCHF and the contracts will run for up to seven years. This paper aims to discuss and analyze the experience gained to date in the management of these contracts. In particular, the paper will address the issues of conditions of contract and specification for this form of contract. Current experience with each of the three consultants will be presented with the areas of difficulty highlighted. Conclusions will be made regarding future use of such contracts and in particular the way in which CERN must change in order to work efficiently with external designers.

EFQPSK Versus CERN: A Comparative Study

Science.gov (United States)

Borah, Deva K.; Horan, Stephen

2001-01-01

This report presents a comparative study on Enhanced Feher's Quadrature Phase Shift Keying (EFQPSK) and Constrained Envelope Root Nyquist (CERN) techniques. These two techniques have been developed in recent times to provide high spectral and power efficiencies under nonlinear amplifier environment. The purpose of this study is to gain insights into these techniques and to help system planners and designers with an appropriate set of guidelines for using these techniques. The comparative study presented in this report relies on effective simulation models and procedures. Therefore, a significant part of this report is devoted to understanding the mathematical and simulation models of the techniques and their set-up procedures. In particular, mathematical models of EFQPSK and CERN, effects of the sampling rate in discrete time signal representation, and modeling of nonlinear amplifiers and predistorters have been considered in detail. The results of this study show that both EFQPSK and CERN signals provide spectrally efficient communications compared to filtered conventional linear modulation techniques when a nonlinear power amplifier is used. However, there are important differences. The spectral efficiency of CERN signals, with a small amount of input backoff, is significantly better than that of EFQPSK signals if the nonlinear amplifier is an ideal clipper. However, to achieve such spectral efficiencies with a practical nonlinear amplifier, CERN processing requires a predistorter which effectively translates the amplifier's characteristics close to those of an ideal clipper. Thus, the spectral performance of CERN signals strongly depends on the predistorter. EFQPSK signals, on the other hand, do not need such predistorters since their spectra are almost unaffected by the nonlinear amplifier, Ibis report discusses several receiver structures for EFQPSK signals. It is observed that optimal receiver structures can be realized for both coded and uncoded EFQPSK

CERN 's large hadron collider : Radiation protection aspects of design and commissioning

International Nuclear Information System (INIS)

Forkel-Wirth, Doris; Brugger, Markus; Menzel, Hans; Roesler, Stefan; Vincke, Heinz; Vincke, Helmut

2008-01-01

Full text: CERN, the world's largest particle physics laboratory provides high energy hadron beams for experiments exploring matter. For this purpose various accelerators are operated and in 2008 the last link will be added to the accelerator chain: beam will be injected into CERN 's new 'flagship', the Large Hadron Collider (LHC). From then on high energy physics experiments will exploit the LHC 's colliding beams of protons and lead ions with a center of mass energy of 14 TeV and 1150 TeV, respectively. Radiation Protection aspects were taken into account during the whole duration of the design phase. Conservative design constraints were defined in 1996; some years later some of them, in particular with respect to the dose to occupational exposed workers, had to be readjusted to account for the latest development in CERN 's radiation protection rules and regulations. Numerous radiation protection studies had been performed to ensure a lay-out of the machine and its experiments in compliance with these constraints. These studies assessed all radiation risks related to the various beam-operation modes of the accelerator. In all cases external exposure was identified as the major risk: due to high energetic, mixed radiation fields during beam-on and due to beta and gamma radiation fields caused by induced radioactivity during beam-off. Counter measures were implemented like an optimized beam operation to limit beam losses, installation of thick shielding, prohibition of access to the major part of the LHC underground areas during beam-operation and optimization of the equipment and its handling during maintenance and repair. Detailed Monte Carlo simulations were performed to derive from the various beam loss scenarios the dose rates the workers will be exposed to. Individual and collective doses were projected based on the calculations and the maintenance scenarios provided by the teams concerned. In an iterative way the lay-out of the various regions were optimized

An analytical simulation of the ion-antiproton instabilities in the CERN Antiproton Accumulator

International Nuclear Information System (INIS)

Dainelli, A.; Pusterla, M.

1988-01-01

A direct map method with a Mathieu approach to tune modulation is proposed and used to simulate nonlinear effects on particle motion that are generated by a beam-beam-like interaction of antiprotons with ions of the residual gas in the CERN Antiproton Accumulator. Two different Gaussian ion distributions are used, and the effects of the simulated beam-beam force on the particle motion is studied in phase space, with a particular attention to high-order nonlinear resonances. (author) 16 refs., 4 figs

Simulation of the CERN GTS-LHC ECR ion source extraction system with lead and argon ion beams

CERN Document Server

Toivanen, V; Küchler, D; Lombardi, A; Scrivens, R; Stafford-Haworth, J

2014-01-01

A comprehensive study of beam formation and beam transport has been initiated in order to improve the performance of the CERN heavy ion injector, Linac3. As part of this study, the ion beam extraction system of the CERN GTS-LHC 14.5 GHz Electron Cyclotron Resonance Ion Source (ECRIS) has been modelled with the ion optical code IBSimu. The simulations predict self-consistently the triangular and hollow beam structures which are often observed experimentally with ECRIS ion beams. The model is used to investigate the performance of the current extraction system and provides a basis for possible future improvements. In addition, the extraction simulation provides a more realistic representation of the initial beam properties for the beam transport simulations, which aim to identify the performance bottle necks along the Linac3 low energy beam transport. The results of beam extraction simulations with Pb and Ar ion beams from the GTS-LHC will be presented and compared with experimental observations.

Simulations and measurements of beam loss patterns at the CERN Large Hadron Collider

Science.gov (United States)

Bruce, R.; Assmann, R. W.; Boccone, V.; Bracco, C.; Brugger, M.; Cauchi, M.; Cerutti, F.; Deboy, D.; Ferrari, A.; Lari, L.; Marsili, A.; Mereghetti, A.; Mirarchi, D.; Quaranta, E.; Redaelli, S.; Robert-Demolaize, G.; Rossi, A.; Salvachua, B.; Skordis, E.; Tambasco, C.; Valentino, G.; Weiler, T.; Vlachoudis, V.; Wollmann, D.

2014-08-01

The CERN Large Hadron Collider (LHC) is designed to collide proton beams of unprecedented energy, in order to extend the frontiers of high-energy particle physics. During the first very successful running period in 2010-2013, the LHC was routinely storing protons at 3.5-4 TeV with a total beam energy of up to 146 MJ, and even higher stored energies are foreseen in the future. This puts extraordinary demands on the control of beam losses. An uncontrolled loss of even a tiny fraction of the beam could cause a superconducting magnet to undergo a transition into a normal-conducting state, or in the worst case cause material damage. Hence a multistage collimation system has been installed in order to safely intercept high-amplitude beam protons before they are lost elsewhere. To guarantee adequate protection from the collimators, a detailed theoretical understanding is needed. This article presents results of numerical simulations of the distribution of beam losses around the LHC that have leaked out of the collimation system. The studies include tracking of protons through the fields of more than 5000 magnets in the 27 km LHC ring over hundreds of revolutions, and Monte Carlo simulations of particle-matter interactions both in collimators and machine elements being hit by escaping particles. The simulation results agree typically within a factor 2 with measurements of beam loss distributions from the previous LHC run. Considering the complex simulation, which must account for a very large number of unknown imperfections, and in view of the total losses around the ring spanning over 7 orders of magnitude, we consider this an excellent agreement. Our results give confidence in the simulation tools, which are used also for the design of future accelerators.

Simulations and measurements of beam loss patterns at the CERN Large Hadron Collider

Directory of Open Access Journals (Sweden)

R. Bruce

2014-08-01

Full Text Available The CERN Large Hadron Collider (LHC is designed to collide proton beams of unprecedented energy, in order to extend the frontiers of high-energy particle physics. During the first very successful running period in 2010–2013, the LHC was routinely storing protons at 3.5–4 TeV with a total beam energy of up to 146 MJ, and even higher stored energies are foreseen in the future. This puts extraordinary demands on the control of beam losses. An uncontrolled loss of even a tiny fraction of the beam could cause a superconducting magnet to undergo a transition into a normal-conducting state, or in the worst case cause material damage. Hence a multistage collimation system has been installed in order to safely intercept high-amplitude beam protons before they are lost elsewhere. To guarantee adequate protection from the collimators, a detailed theoretical understanding is needed. This article presents results of numerical simulations of the distribution of beam losses around the LHC that have leaked out of the collimation system. The studies include tracking of protons through the fields of more than 5000 magnets in the 27 km LHC ring over hundreds of revolutions, and Monte Carlo simulations of particle-matter interactions both in collimators and machine elements being hit by escaping particles. The simulation results agree typically within a factor 2 with measurements of beam loss distributions from the previous LHC run. Considering the complex simulation, which must account for a very large number of unknown imperfections, and in view of the total losses around the ring spanning over 7 orders of magnitude, we consider this an excellent agreement. Our results give confidence in the simulation tools, which are used also for the design of future accelerators.

Doing business with CERN

CERN Multimedia

2015-01-01

The Procurement Service, in collaboration with the Communications group’s Design team, has recently launched a new information campaign targeted at companies wishing to supply their products and services to CERN. This campaign comprises:   A brochure, available in hard and soft copy:  http://procurement.web.cern.ch/brochures/doing-business-with-cern.   A 6-minute video overview: https://procurement-dev.web.cern.ch/doing-business-with-cern. This campaign is intended for Member State firms with whom CERN is yet to do business. The key objectives are: To emphasise that CERN can be considered a major customer across a wide range of activities;   To present CERN’s procurement procedures in a dynamic and digestible way;   To highlight the information available on CERN’s procurement website: http://procurement.web.cern.ch. Furthermore, a new section called “Having a contract with CERN” is also now ava...

CERN in 2030

CERN Multimedia

Laëtitia Pedroso

2011-01-01

A competition will soon be launched to select the architect, urban planner or landscape designer to undertake the first phase of redevelopment of the parking area by the flagpoles, between Entrances A and B. This will be the first stage in a wider development project aimed at sprucing up the CERN site and enhancing its image. Work to create a pleasant and harmonious area at the CERN entrance will start in 2013 while preparatory work for other developments inside the CERN site has already begun…   CERN as it is today.  By 2030, CERN will be a greener place, much like a university campus. The arrival of the tramway on 30 April will be an opportunity to forge ahead with the urban plan aimed at rejuvenating the CERN site and redefining how it is organised. "Nearly sixty years after CERN's first buildings went up, this plan will help transform the site and give it a welcoming, friendly face, a bit like a university campus," explains Thierry Chanard, urban plannin...

Numerical simulation of electromagnetic fields and impedance of CERN LINAC4 H(-) source taking into account the effect of the plasma.

Science.gov (United States)

Grudiev, A; Lettry, J; Mattei, S; Paoluzzi, M; Scrivens, R

2014-02-01

Numerical simulation of the CERN LINAC4 H(-) source 2 MHz RF system has been performed taking into account a realistic geometry from 3D Computer Aided Design model using commercial FEM high frequency simulation code. The effect of the plasma has been added to the model by the approximation of a homogenous electrically conducting medium. Electric and magnetic fields, RF power losses, and impedance of the circuit have been calculated for different values of the plasma conductivity. Three different regimes have been found depending on the plasma conductivity: (1) Zero or low plasma conductivity results in RF electric field induced by the RF antenna being mainly capacitive and has axial direction; (2) Intermediate conductivity results in the expulsion of capacitive electric field from plasma and the RF power coupling, which is increasing linearly with the plasma conductivity, is mainly dominated by the inductive azimuthal electric field; (3) High conductivity results in the shielding of both the electric and magnetic fields from plasma due to the skin effect, which reduces RF power coupling to plasma. From these simulations and measurements of the RF power coupling on the CERN source, a value of the plasma conductivity has been derived. It agrees well with an analytical estimate calculated from the measured plasma parameters. In addition, the simulated and measured impedances with and without plasma show very good agreement as well demonstrating validity of the plasma model used in the RF simulations.

A system for designing and simulating particle physics experiments

International Nuclear Information System (INIS)

Zelazny, R.; Strzalkowski, P.

1987-01-01

In view of the rapid development of experimental facilities and their costs, the systematic design and preparation of particle physics experiments have become crucial. A software system is proposed as an aid for the experimental designer, mainly for experimental geometry analysis and experimental simulation. The following model is adopted: the description of an experiment is formulated in a language (here called XL) and put by its processor in a data base. The language is based on the entity-relationship-attribute approach. The information contained in the data base can be reported and analysed by an analyser (called XA) and modifications can be made at any time. In particular, the Monte Carlo methods can be used in experiment simulation for both physical phenomena in experimental set-up and detection analysis. The general idea of the system is based on the design concept of ISDOS project information systems. The characteristics of the simulation module are similar to those of the CERN Geant system, but some extensions are proposed. The system could be treated as a component of greater, integrated software environment for the design of particle physics experiments, their monitoring and data processing. (orig.)

CERN in detail

CERN Multimedia

Laëtitia Pedroso

2010-01-01

Before, you had to go on the TPG website to find a tram-route, use Google Maps to see an aerial photo of CERN, and look for CERN buildings on map.web.cern.ch. Now, that's ancient history, with a new Geographical Information System (GIS) Portal set up by the Design Office and Patrimony Service (GS/SEM/DOP).  It's a one-stop-shop for all this information and much more.   A screenshot of the GIS Portal. Over the past few days, you might have noticed the new interface called MAPSearch that pops up when you make a building search using the Building and Roads field on the CERN homepage. This is a simplified version of the new GIS web Portal, a project on which the GS Department's Design Office and Patrimony Service has been working since January 2010. "In today's informatics age, we need to respond ever more quickly to increasing numbers of specific user requests," explains Project Leader Youri Robert. This is more than just a new release of an old tool, it's a completely n...

CERN Summer Student Project Report – Simulation of the Micromegas Detector

CERN Document Server

Soares Ferreira Nunes Teixeira, Sofia Luisa

2015-01-01

My project during the Summer Student Programme at CERN consisted on simulations of the Micromegas (MM) detectors in order to test and characterize them in the presence of contamination by air of the gas mixture. The MM detectors were chosen for the upcoming upgrade of the ATLAS detector. The motivation for this project and the results obtained are here presented. Moreover, the work that should be carried out after this programme as a continuation of this project is also referred. To conclude, final considerations about the project are presented.

Open Days Guide: CERN, for a better life

CERN Multimedia

CERN Bulletin

2013-01-01

At times, CERN research can seem rather “out there”. After all, how can this work possibly relate to daily life? So, let’s bring it back down to Earth with some real-life examples of CERN technology in action.   A treatment room at the Italian centre for hadron therapy (CNAO). Image: CNAO. On the Open Days, visit these sites for a first-hand look at CERN’s important and innovative role in everyday technology: - The Knowledge Transfer (KT) visit point, where you will be introduced to hadron therapy, Positron Emission Tomography (PET), the Medicis project and Medipix. There, you will be able to see an immobilization mask, where patients are placed during hadron therapy treatment, as well as a “phantom” – a piece used to simulate the human body for radiobiology studies. (Map: A3). - Pôle Energie: Technologies developed for CERN accelerators have been used to design and build a high-tech solar thermal collector. Th...

CERN moves to http://home.cern

CERN Multimedia

2015-01-01

A new top-level domain for CERN will be inaugurated next week, with the migration of the core website to http://home.cern.   The new home.cern webpage. The .cern top-level domain is intended for the exclusive use of CERN and its affiliates, and will soon be open for applications from within the community. Clear governance mechanisms for registration and management of .cern domains have been put in place. Applications for domains may be submitted by current members of the CERN personnel, and must be sponsored by a CERN entity such as a department, experiment, project or CERN-recognised experiment. For more information please refer to the registration policy. The acquisition of the .cern top-level domain was negotiated via ICANN’s new gTLD programme by a board comprising members of the CERN Legal Service, Communications group and IT department. .cern is one of over 1,300 new top-level domains that will launch over the coming months and years. The .cern domain nam...

A high-compression electron gun for C6+ production: concept, simulations and mechanical design

Science.gov (United States)

Mertzig, Robert; Breitenfeldt, M.; Mathot, S.; Pitters, J.; Shornikov, A.; Wenander, F.

2017-07-01

In this paper we report on simulations and the mechanical design of a high-compression electron gun for an Electron Beam Ion Source (EBIS) dedicated for production of high intensity and high repetition rate pulses of bare carbon ions for injection into linac-based hadron therapy facilities. The gun is presently under construction at CERN to be retrofitted into the TwinEBIS test bench for experimental studies. We describe the design constraints, show results of numeric simulations and report on the mechanical design featuring several novel ideas. The reported design makes use of combined-function units with reduced number of mechanical joints that were carefully controlled and tuned during the manufacturing phase. The simulations addressed a wide range of topics including the influence of thermal effects, focusing optics, symmetry-breaking misalignments and injection into a full 5 T field.

The 2017 Xe run at CERN Linac3: measurements and beam dynamics simulations

CERN Document Server

Benedetti, Stefano; Kuchler, Detlef; Lombardi, Alessandra; Wenander, Fredrik John Carl; Toivanen, Ville Aleksi; CERN. Geneva. ATS Department

2018-01-01

At CERN quark-gluon plasma and fixed target ion experiments are performed thanks to the Heavy-ion Facility, composed by different accelerators. The starting point is CERN Linac3, which delivers 4.2 MeV/u ion beams to the Low Energy Ion Ring (LEIR). In 2017 Linac3 accelerated Xe instead of the most usual Pb. Machine development (MD) time was allocated to adapt the accelerator to the new ion species. This article summarizes the measurements performed during the MD time allocated to characterize the line from the source to the filtering section. A parallel effort was devoted to match those measurements to the beam dynamics simulations, and the second part of the article highlights the results achieved in this regard. Thanks to the improved understanding of the machine critical areas, a list of possible improvements is proposed at the end.

CERN Technical Training - New courses available at CERN!

CERN Multimedia

HR Department

2010-01-01

1. - The “Web 2.0 development with AJAX” is a 3 day course. This hands-on AJAX course provides the knowledge needed to design and develop Web 2.0 websites. Through a series of lectures and practical examples you will learn the power of the JavaScript XML Http request object and how it can be used to add advanced interactivity to your website. This course gives an overview of the main AJAX frameworks and Web 2.0 techniques. The course will take place, in English, from 28 to 30 June 2010 in the CERN Technical Training Centre. Registrations are open on the Technical Training page. For more information on our catalogue or for questions/comments, contact us at Technical.Training@cern.ch 2. - “CAO = Allegro Design Entry HDL Front-to-Back Flow v16.3” is a 3 day course. In this course, you will learn how to create board-level schematic designs with Design Entry HDL. You will explore the integration between Design Entry HDL and other tools in the design flow, including the A...

La Hollande au CERN

CERN Multimedia

CERN Press Office. Geneva

1995-01-01

On 17 October the third industrial exhibition, "Holland at CERN" was officially opened by Dr R.J. van Duinen, President of the Dutch Organisation for Scientific Research (NWO). In his opening speech he encouraged scientific organisations such as CERN to take full advantage of industry's ability to design and invent new processes and equipment stressing that the purpose of the "Holland at CERN" exhibition was not simply to sell equipment, but to establish an efficient cross-fertilisation between fundamental science and industry.

Conceptual design of the SPL II A high-power superconducting $H^-$ linac at CERN

CERN Document Server

Baylac, M; Benedico-Mora, E; Caspers, Friedhelm; Chel, S; Deconto, J M; Duperrier, R; Froidefond, E; Garoby, R; Hanke, K; Hill, C; Hori, M; Inigo-Golfin, J; Kahle, K; Kroyer, T; Küchler, D; Lallement, J B; Lindroos, M; Lombardi, A M; López Hernández, A; Magistris, M; Meinschad, T; Millich, Antonio; Noah-Messomo, E; Pagani, C; Palladino, V; Paoluzzi, M; Pasini, M; Pierini, P; Rossi, C; Royer, J P; Sanmartí, M; Sargsyan, E; Scrivens, R; Silari, M; Steiner, T; Tückmantel, Joachim; Uriot, D; Vretenar, M

2006-01-01

An analysis of the revised physics needs and recent progress in the technology of superconducting RF cavities have led to major changes in the speci cation and in the design for a Superconducting Proton Linac (SPL) at CERN. Compared with the rst conceptual design report (CERN 2000–012) the beam energy is almost doubled (3.5 GeV instead of 2.2 GeV), while the length of the linac is reduced by 40% and the repetition rate is reduced to 50 Hz. The basic beam power is at a level of 4–5MW and the approach chosen offers enough margins for upgrades. With this high beam power, the SPL can be the proton driver for an ISOL-type radioactive ion beam facility of the next generation (`EURISOL'), and for a neutrino facility based on superbeam C beta-beam or on muon decay in a storage ring (`neutrino factory'). The SPL can also replace the Linac2 and PS Booster in the low-energy part of the CERN proton accelerator complex, improving signi cantly the beam performance in terms of brightness and intensity for the bene t of al...

CERN Technical Training 2008: Learning for the LHC! FLUKA Workshop 2008: 23-27 June 2008

CERN Multimedia

2008-01-01

http://www.cern.ch/Fluka2008 FLUKA is a fully integrated particle physics Monte-Carlo simulation package. It has many applications in high energy experimental physics and engineering, shielding, detector and telescope design, cosmic ray studies, dosimetry, medical physics and radio-biology. More information, as well as related publications, can be found on the official FLUKA website (http://www.fluka.org). This year, the CERN FLUKA Team, in collaboration with INFN and SC/RP, is organizing a FLUKA beginners course, held at CERN for the first time. Previous one-week courses were given in Frascati (Italy), twice in Houston (Texas, US), Pavia (Italy), as well as in Legnaro (Italy). At CERN, continuous lectures are provided in the framework of locally scheduled ‘FLUKA User Meetings’ (http://www.cern.ch/info-fluka-discussion). This new dedicated one-week CERN training course will be an opportunity for new users to learn the basics of FLUKA, as well as offering the possibility to broaden their knowledge about t...

CERN Technical Training 2008: Learning for the LHC! FLUKA Workshop 2008: 23-27 June 2008

CERN Multimedia

2008-01-01

http://www.cern.ch/Fluka2008 FLUKA is a fully integrated particle physics Monte-Carlo simulation package. It has many applications in high energy experimental physics and engineering, shielding, detector and telescope design, cosmic ray studies, dosimetry, medical physics and radio-biology. More information, as well as related publications, can be found on the official FLUKA website (http://www.fluka.org). This year, the CERN FLUKA Team, in collaboration with INFN and SC/RP, is organizing a FLUKA beginner’s course, held at CERN for the first time. Previous one-week courses were given in Frascati (Italy), twice in Houston (Texas, US), Pavia (Italy), as well as in Legnaro (Italy). At CERN, continuous lectures are provided in the framework of locally scheduled ‘FLUKA User Meetings’ (http://www.cern.ch/info-fluka-discussion). This new dedicated one-week CERN training course will be an opportunity for new users to learn the basics of FLUKA, as well as offering the possibility to broaden their knowledge abou...

CERN firemen share their expertise

CERN Multimedia

Maximilien Brice

2002-01-01

Firemen from local fire brigades have been coming to CERN to learn modern fire-fighting techniques. The CERN firemen have some unique training equipment for two particularly dangerous fire hazards, flashover and backdraft. Backdraft occurs when a fire smoulders for a long time within a confined space. The gases produced by the embers fail to burn owing to a lack of oxygen. When the door of the room is opened, for example, the resulting inflow of oxygen causes a deflagration that may prove fatal. This series of photos shows the use of special apparatus to simulate the spectacular backdraft phenomenon, so that firemen training at CERN learn to understand it.

New radiation protection calibration facility at CERN.

Science.gov (United States)

Brugger, Markus; Carbonez, Pierre; Pozzi, Fabio; Silari, Marco; Vincke, Helmut

2014-10-01

The CERN radiation protection group has designed a new state-of-the-art calibration laboratory to replace the present facility, which is >20 y old. The new laboratory, presently under construction, will be equipped with neutron and gamma sources, as well as an X-ray generator and a beta irradiator. The present work describes the project to design the facility, including the facility placement criteria, the 'point-zero' measurements and the shielding study performed via FLUKA Monte Carlo simulations. © The Author 2013. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The new vertical neutron beam line at the CERN n-TOF facility design and outlook on the performance

Energy Technology Data Exchange (ETDEWEB)

Weiß, C., E-mail: christina.weiss@cern.ch [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Chiaveri, E.; Girod, S.; Vlachoudis, V.; Aberle, O. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Barros, S. [Instituto Tecnológico e Nuclear, Instituto Superior Técnico, Universidade Técnica de Lisboa, Lisboa (Portugal); Bergström, I. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Berthoumieux, E. [Commissariat à l’Énergie Atomique (CEA) Saclay – Irfu, Gif-sur-Yvette (France); Calviani, M. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Guerrero, C.; Sabaté-Gilarte, M. [Universidad de Sevilla (Spain); European Organization for Nuclear Research (CERN), Geneva (Switzerland); Tsinganis, A. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); National Technical University of Athens (NTUA) (Greece); Andrzejewski, J. [Uniwersytet Łódzki, Lodz (Poland); Audouin, L. [Centre National de la Recherche Scientifique/IN2P3 – IPN, Orsay (France); Bacak, M. [Atominstitut, Technische Universität Wien (Austria); Balibrea-Correa, J. [Centro de Investigaciones Energeticas Medioambientales y Tecnológicas (CIEMAT), Madrid (Spain); Barbagallo, M. [Istituto Nazionale di Fisica Nucleare, Bari (Italy); Bécares, V. [Centro de Investigaciones Energeticas Medioambientales y Tecnológicas (CIEMAT), Madrid (Spain); and others

2015-11-01

At the neutron time-of-flight facility n-TOF at CERN a new vertical beam line was constructed in 2014, in order to extend the experimental possibilities at this facility to an even wider range of challenging cross-section measurements of interest in astrophysics, nuclear technology and medical physics. The design of the beam line and the experimental hall was based on FLUKA Monte Carlo simulations, aiming at maximizing the neutron flux, reducing the beam halo and minimizing the background from neutrons interacting with the collimator or back-scattered in the beam dump. The present paper gives an overview on the design of the beam line and the relevant elements and provides an outlook on the expected performance regarding the neutron beam intensity, shape and energy resolution, as well as the neutron and photon backgrounds.

Advanced Control Facility for the CERN-UNICOS Framework

CERN Document Server

Pezzetti, M; Coppier, H

2010-01-01

CERN, during last decade, has extensively applied the CERN/UNICOS framework to large scale cryoplant control system. An increase of interested to advanced control techniques and innovative simulation environment applied to cryogenic processes has also occur. Since new control algorithm development into UNICOS framework requires significant time, a control testing platform which can be externally connected can improve and simplify the procedure of testing advanced controllers implementation. In this context, the present paper describes the development of a control testing tool at CERN, which allows rapid control strategies implementation through the Matlab/Simulink® environment, coupled with the large scale cryogenics UNICOS control system or with the CERN PROCOS simulation environment. The time delays which are inherently introduced by network links and communication protocols are analyzed and experimentally identified. Security and reliability issues are also discussed.

Fundamental particles Bat 774 at CERN

CERN Document Server

Soppelsa, Francesco

2016-01-01

The book talks about the design and construction of the building 774 at CERN. The building 774 is a unique building both for its architectural value and for its location. Located in front of of the CCC (Control Center) at CERN is the main door of more than 100,000 tourists come visiting CERN each year.

CERN – better than science fiction!

CERN Multimedia

2007-01-01

From left to right: Allan Cameron (Production Designer), Sam Breckham (Location Manager), James Gillies (Head of Communication at CERN), Jacques Fichet (from the CERN Audiovisual Service), Rolf Landua (former spokesman of the ATHENA antihydrogen experiment at CERN and Head of CERN’s Education Group), Ron Howard, and Renilde Vanden Broeck (CERN press officer). The two-time Academy Award-winning American film director, Ron Howard, recently visited CERN for background research in preparation for his new film Angels and Demons, based on the book by Dan Brown. He also filmed the adaption of Brown’s bestselling novel The Da Vinci Code last year.

Italy's Prime Minister visits CERN

CERN Multimedia

Stefania Pandolfi

2015-01-01

On Tuesday, 7 July 2015, the Prime Minister of the Italian Republic, Matteo Renzi, visited CERN. He was accompanied by a delegation that included Italy's Minister for Education, University and Research, Stefania Giannini.   From left to right: Fernando Ferroni, President of the Istituto Nazionale di Fisica Nucleare (INFN); Sergio Bertolucci, CERN Director for Research and Scientific Computing; Stefania Giannini, Italy's Minister of Education, University and Research; Matteo Renzi, Prime Minister of the Italian Republic; Fabiola Gianotti, CERN Director-General Designate; Rolf Heuer, CERN Director-General.   The Prime Minister was welcomed by members of the CERN Management together with former CERN Director-General and Senator for Life of the Italian Republic, Carlo Rubbia. After a brief general introduction to CERN’s activities by Rolf Heuer, the Italian delegation visited LHC Point 1. After a tour of the ATLAS control room, they donned helmets to visit th...

Monte Carlo simulations and benchmark studies at CERN's accelerator chain

CERN Document Server

AUTHOR|(CDS)2083190; Brugger, Markus

2016-01-01

Mixed particle and energy radiation fields present at the Large Hadron Collider (LHC) and its accelerator chain are responsible for failures on electronic devices located in the vicinity of the accelerator beam lines. These radiation effects on electronics and, more generally, the overall radiation damage issues have a direct impact on component and system lifetimes, as well as on maintenance requirements and radiation exposure to personnel who have to intervene and fix existing faults. The radiation environments and respective radiation damage issues along the CERN’s accelerator chain were studied in the framework of the CERN Radiation to Electronics (R2E) project and are hereby presented. The important interplay between Monte Carlo simulations and radiation monitoring is also highlighted.

Simulations and measurements of beam loss patterns at the CERN Large Hadron Collider

CERN Document Server

Bruce, R.; Boccone, V.; Bracco, C.; Brugger, M.; Cauchi, M.; Cerutti, F.; Deboy, D.; Ferrari, A.; Lari, L.; Marsili, A.; Mereghetti, A.; Mirarchi, D.; Quaranta, E.; Redaelli, S.; Robert-Demolaize, G.; Rossi, A.; Salvachua, B.; Skordis, E.; Tambasco, C.; Valentino, G.; Weiler, T.; Vlachoudis, V.; Wollmann, D.

2014-08-21

The CERN Large Hadron Collider (LHC) is designed to collide proton beams of unprecedented energy, in order to extend the frontiers of high-energy particle physics. During the first very successful running period in 2010--2013, the LHC was routinely storing protons at 3.5--4 TeV with a total beam energy of up to 146 MJ, and even higher stored energies are foreseen in the future. This puts extraordinary demands on the control of beam losses. An un-controlled loss of even a tiny fraction of the beam could cause a superconducting magnet to undergo a transition into a normal-conducting state, or in the worst case cause material damage. Hence a multi-stage collimation system has been installed in order to safely intercept high-amplitude beam protons before they are lost elsewhere. To guarantee adequate protection from the collimators, a detailed theoretical understanding is needed. This article presents results of numerical simulations of the distribution of beam losses around the LHC that have leaked out of the co...

DESY greets CERN

CERN Multimedia

Helmut Dosch, Chairman of the DESY Board of Directors, continues the series of occasional exchanges between CERN and other laboratories world-wide. As part of this exchange, CERN Director-General Rolf Heuer wrote a message in DESY inForm. Helmut Dosch took over from Albrecht Wagner in March 2009. You may think that the connections between CERN and DESY are obvious – particle physics labs with record-breaking accelerators and users from all around the world trying to solve mankind’s great mysteries. We even exchanged a few Directors. But did you know that there are similarities that are much closer to home – for example that both labs have names for their staff in the host language that are untranslatable into English? You are CERNoises and CERNois, we are DESYanerinnen and DESYaner. And in the end it’s the people it all comes down to. We at DESY admire the resourcefulness, enthusiasm, dedication and perseverance with which you at CERN have designed, built, started ...

Radiation protection considerations in the design of the LHC, CERN's large hadron collider

International Nuclear Information System (INIS)

Hoefert, M.; Huhtinen, M.; Moritz, L.E.; Nakashima, H.; Potter, K.M.; Rollet, S.; Stevenson, G.R.; Zazula, J.M.

1996-01-01

This paper describes the radiological concerns which are being taken into account in the design of the LHC (CERN's future Large Hadron Collider). The machine will be built in the 27 km circumference ring tunnel of the existing LEP collider at CERN. The high intensity of the circulating beams (each containing more than 10 14 protons at 7 TeV) determines the thickness specification of the shielding of the main-ring tunnel, the precautions to be taken in the design of the beam dumps and their associated caverns and the radioactivity induced by the loss of protons in the main ring by inelastic beam-gas interactions. The high luminosity of the collider is designed to provide inelastic collision rates of 10 9 per second in each of the two principal detector installations, ATLAS and CMS. These collisions determine the shielding of the experimental areas, the radioactivity induced in both the detectors and in the machine components on either side of the experimental installations and, to some extent, the radioactivity induced in the beam-cleaning (scraper) systems. Some of the environmental issues raised by the project will be discussed. (author)

A new design for the CERN-Fréjus neutrino Super Beam

CERN Document Server

Longhin, A

2011-01-01

We present an optimization of the hadron focusing system for a low-energy high-intensity conventional neutrino beam (Super-Beam) proposed on the basis of the HP-SPL at CERN with a beam power of 4 MW and an energy of 4.5 GeV. The far detector would be a 440 kton Water Cherenkov detector (MEMPHYS) located at a baseline of 130 km in the Fr\\'ejus site. The neutrino fluxes simulation relies on a new GEANT4 based simulation coupled with an optimization algorithm based on the maximization of the sensitivity limit on the $\\theta_{13}$ mixing angle. A new configuration adopting a multiple horn system with solid targets is proposed which improves the sensitivity to $\\theta_{13}$ and the CP violating phase $\\delta_{CP}$.

CERN in the spotlight at the Geneva Festival

CERN Document Server

2004-01-01

CERN will be the guest of honour at the Geneva Festival, which takes place from 29 July to 8 August. The Organization will be involved in two big events: the curtain-raising firework display and the end-of-festival concert. Come and see the creation of the Universe... acted out by fireworks! CERN, celebrating its 50th anniversary, will raise the curtain on the annual Geneva Festival (Fêtes de Genève) on Friday 30 July at 10.15 p.m. with a pyrotechnical and musical extravaganza. The display will be accompanied by a narration explaining the different stages of creation, written by CERN physicist Rolf Landua. Pyro-musical design is by Catherine Walder, overall firework design by René Gousset and pyrotechnical design by Pierre-Alain Beretta (Pyrostars). For further information see: www.cern.ch/cern50/events/Fireworks/Fireworks-en.html. At the end of the Festival, the CERN choir, itself celebrating its thirtieth year, joins forces with the Annecy choir Pro Musica to give a special performance of Jo...

Teachers come to learn at CERN!

CERN Multimedia

Patrice Loïez

2003-01-01

PhysicsTeachers@CERN is an annual three-day meeting at CERN for teachers from all over Europe. The programme includes seminars, visits and educational activities. It is designed to give physics teachers new insights into contemporary particle physics. The fifty participants in the 2003 meeting, which took place from 21 to 23 February, are pictured in the garden adjoining Microcosm, CERN's on-site science centre.

The 168/E at CERN and the MARK 2. An improved processor design

International Nuclear Information System (INIS)

Kunz, P.; Botterill, D.R.; Lord, D.; Edwards, A.; Fucci, A.; Lee, G.; Martin, B.; Mornacchi, G.; Scharff-Hansen, P.; Storr, M.

1981-01-01

In the first part of this paper the history of the 168/E work at CERN is reviewed, this is followed by a short description of the hardware and software in use and finally some examples of future applications are given. In the second part of the paper the limitations of the present 168/E design are discussed and the ways that a new design, Mark 2, could overcome them are presented. (orig.)

CERN Technical Training: Signal Processor

CERN Multimedia

HR Department

2009-01-01

A new training is going to be held at CERN on the ADSP SHARC Family. The "System Development and Programming with the Analog Devices’ SHARC Family" course is a 3.5-day hands-on training on Analog Devices SHARC DSPs, focusing on the latest ‘368/9 and 37x families. General DSP architecture, peripherals available, booting up process and DSP code development will be covered. Hardware tools, debugging and hardware design guidelines will be introduced as well. The course id designed for System Designers needing to make informed decisions on design tradeoffs, Hardware Designers needing to develop external interfaces, and Code Developers needing to know how to get the highest performance from their algorithms. The course will take place, in English, from 31 March to 4 April in the CERN Technical Training Center. Few places are still available. Registrations are opened on the Technical Training page. More information on our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your que...

PhysicsTeachers@CERN2005

CERN Multimedia

Maximilien Brice

2005-01-01

PhysicsTeachers@CERN is a three day conference for high school teachers. It is a great opportunity to meet colleagues from other countries and keep up-to-date with today's physics. The conference is designed to provide a valuable experience for high school physics teachers and give them new insights into contemporary particle physics. The conference is open to physics teachers from all CERN member states.

CERN Technical Training: Digital Signal Processors

CERN Multimedia

HR Department

2009-01-01

A new training is going to be held at CERN on the ADSP SHARC Family. The “System Development and Programming with the Analog Devices' SHARC Family” course is a 3.5-day hands-on training on Analog Devices SHARC DSPs, focusing on the latest ‘368/9 and 37x families. General DSP architecture, peripherals available, booting up process and DSP code development will be covered. Hardware tools, debugging and hardware design guidelines will be introduced as well. The course id designed for System Designers needing to make informed decisions on design tradeoffs, Hardware Designers needing to develop external interfaces, and Code Developers needing to know how to get the highest performance from their algorithms. The course will take place, in English, from 31 March to 4 April in the CERN Technical Training Center. Few places are still available. Registrations are opened on the Technical Training page. More information on our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or conta...

Measurements and FLUKA Simulations of Bismuth, Aluminium and Indium Activation at the upgraded CERN Shielding Benchmark Facility (CSBF)

Science.gov (United States)

Iliopoulou, E.; Bamidis, P.; Brugger, M.; Froeschl, R.; Infantino, A.; Kajimoto, T.; Nakao, N.; Roesler, S.; Sanami, T.; Siountas, A.; Yashima, H.

2018-06-01

The CERN High energy AcceleRator Mixed field (CHARM) facility is situated in the CERN Proton Synchrotron (PS) East Experimental Area. The facility receives a pulsed proton beam from the CERN PS with a beam momentum of 24 GeV/c with 5·1011 protons per pulse with a pulse length of 350 ms and with a maximum average beam intensity of 6.7·1010 protons per second. The extracted proton beam impacts on a cylindrical copper target. The shielding of the CHARM facility includes the CERN Shielding Benchmark Facility (CSBF) situated laterally above the target that allows deep shielding penetration benchmark studies of various shielding materials. This facility has been significantly upgraded during the extended technical stop at the beginning of 2016. It consists now of 40 cm of cast iron shielding, a 200 cm long removable sample holder concrete block with 3 inserts for activation samples, a material test location that is used for the measurement of the attenuation length for different shielding materials as well as for sample activation at different thicknesses of the shielding materials. Activation samples of bismuth, aluminium and indium were placed in the CSBF in September 2016 to characterize the upgraded version of the CSBF. Monte Carlo simulations with the FLUKA code have been performed to estimate the specific production yields of bismuth isotopes (206 Bi, 205 Bi, 204 Bi, 203 Bi, 202 Bi, 201 Bi) from 209 Bi, 24 Na from 27 Al and 115 m I from 115 I for these samples. The production yields estimated by FLUKA Monte Carlo simulations are compared to the production yields obtained from γ-spectroscopy measurements of the samples taking the beam intensity profile into account. The agreement between FLUKA predictions and γ-spectroscopy measurements for the production yields is at a level of a factor of 2.

Shielding design for the front end of the CERN SPL.

Science.gov (United States)

Magistris, Matteo; Silari, Marco; Vincke, Helmut

2005-01-01

CERN is designing a 2.2-GeV Superconducting Proton Linac (SPL) with a beam power of 4 MW, to be used for the production of a neutrino superbeam. The SPL front end will initially accelerate 2 x 10(14) negative hydrogen ions per second up to an energy of 120 MeV. The FLUKA Monte Carlo code was employed for shielding design. The proposed shielding is a combined iron-concrete structure, which also takes into consideration the required RF wave-guide ducts and access labyrinths to the machine. Two beam-loss scenarios were investigated: (1) constant beam loss of 1 Wm(-1) over the whole accelerator length and (2) full beam loss occurring at various locations. A comparison with results based on simplified approaches is also presented.

CERN@school shoots for the stars

CERN Multimedia

Katarina Anthony

2011-01-01

CERN technology will be taking a stellar journey as the Langton Ultimate Cosmic ray Intensity Detector (LUCID) is launched into space in 2012. LUCID has been designed by students from the CERN@school programme using Timepix chips from the Medipix Collaboration at CERN.   CERN@school students present LUCID.  In today’s educational environment, a pioneering school physics programme that involves students in authentic research seems unlikely. But in the UK, the CERN@school programme is providing the resources for school students to do just that. “We develop projects which allow students to work alongside scientists and engineers before they go to university,” says Becky Parker, head of the Langton Star Centre and founder of the CERN@school programme. “Thanks to these programmes, students can make a genuine contribution to global scientific research. LUCID is the culmination of three years of efforts by the students.” Surrey Satellite Tech...

CERN@school

CERN Multimedia

CERN Bulletin

2010-01-01

CERN’s educational programmes have inspired large numbers of physics teachers all over Europe to adopt innovative approaches to teaching.  Becky Parker, a former participant in the High School Teachers (HST) programme, has set up the CERN@school project, in which students are using Medipix chips to study cosmic rays. They have recently designed and are building Lucid, a detector that will be launched into space in 2011.   The LUCID detector designed by the Langton school. Take a school with the declared aim of ‘providing learning experiences which are enjoyable, stimulating and challenging and which encourage critical and innovative thinking’. Add to that a motivated teacher who wants to put it into practice and you have the perfect seeds for growing a new generation of young researchers. Becky Parker came to CERN in 2007. She observed how cutting-edge research is done here and decided to export it to her school. However, she didn’t just go back t...

Design of a 120 MeV $H^{-}$ Linac for CERN High-Intensity Applications

CERN Document Server

Gerigk, F

2002-01-01

The SPL (Superconducting Proton Linac) study at CERN foresees the construction of a 2.2 GeV linac as a high beam-power driver for applications such as a second-generation radioactive ion beam facility or a neutrino superbeam. At the same time such a high-performance injector would both modernize and improve the LHC injection chain. The 120 MeV normal-conducting section of the SPL could be used directly in a preliminary stage for H- charge-exchange injection into the PS Booster. This would increase the proton flux to the CERN experiments while also improving the quality and reliability of the beams for the LHC. The 120 MeV linac consists of a front-end, a conventional Drift Tube Linac (DTL) to 40 MeV and a Cell Coupled Drift Tube Linac (CCDTL) to the full energy. All the RF structures will operate at 352 MHz, using klystrons and RF equipment recovered from the LEP collider. This paper concentrates on the design of the 3 to 120 MeV section. It introduces the design criteria for high-stability beam optics and th...

First Tuesday @ CERN: Industrial Impact of Information Technology from CERN

CERN Multimedia

CERN. Geneva

2004-01-01

CERN is where the web was born, and remains a hothouse of innovation in information technology (IT). In this fourth First Tuesday @ CERN, we look at industrial partnership at CERN in the IT area from several different angles. The approach taken by CERN with software licencing - a very hot topic in the world of IT - will be discussed. The benefits that CERN hardware and software suppliers gain from working with CERN will be presented, and the CERN openlab, a new approach to industrial partnership at CERN, will be covered. A novel ingredient of this First Tuesday @ CERN is that it will be run in parallel with a similar event for the business community in London, and there will be webcast presentations between the Queen Elizabeth II Conference Centre in London and CERN during the event. Thus, First Tuesday @ CERN will take on a truly European dimension, to reflect CERN's European character.

First Tuesday @ CERN: Industrial Impact of Information Technology from CERN

CERN Multimedia

CERN. Geneva

2004-01-01

CERN is where the web was born, and remains a hothouse of innovation in information technology (IT). In this fourth First Tuesday @ CERN, we look at industrial partnership at CERN in the IT area from several different angles. The approach taken by CERN with software licencing - a very hot topic in the world of IT - will be discussed. The benefits that CERN hardware and software suppliers gain from working with CERN will be presented, and the CERN openlab, a new approach to industrial partnership at CERN, will be covered. A novel ingredient of this First Tuesday @ CERN is that it will be run in parallel with a similar event for the business community in London, and there will be webcast presentations between the Queen Elizabeth II Conference Centre in London and CERN during the event. Thus, First Tuesday @ CERN will take on a truly European dimension, to reflect CERN's European character. More information: http://www.rezonance.ch, or view the joint UK event program

Important changes for cern.market and other newsgroups at CERN

CERN Multimedia

2007-01-01

The "cern.market" is moving to the web! You should now use http://cern.ch/cern.market to read and post messages. After 25 June it will no longer be possible to post messages from a newsreader. More generally, the CERN newsgroup service (news.cern.ch) will be progressively decommissioned in June/July 2007. The newsgroup functionality for CERN discussion forums such as the cern.market is moving to web-based discussion forums and RSS feeds. As of 9 July, public services will need to be used to access public newsgroups (those not starting with "cern"), as the internal news.cern.ch server will cease to provide them. Please read http://cern.ch/mail/help/?fdid=33 for more information. The Mail Services team

Modélisation, simulation et contrôle des installations cryogéniques du CERN

CERN Document Server

Bradu, Benjamin; Gayet, P

2010-01-01

Cette thèse présente le développement d'un simulateur de processus cryogéniques de grande taille appliqué aux installations cryogéniques de l'accélérateur de particules LHC (Large Hadron Collider) au CERN (Organisation Européenne pour la Recherche Nucléaire). Ce simulateur est basé sur une approche de modélisation orientée objet où chaque équipement (échangeur, turbine, compresseur, etc.) est représenté à partir d'un ensemble d'équations physiques algébro-différentielles. L'architecture de contrôle du CERN est également simulée en intégrant le contrôle réalisé par des automates programmables (PLC) avec le système de supervision. Ce simulateur à été développé pour servir différents desseins comme l'entraînement des opérateurs, la vérification des programmes automates (virtual commissioning) et l'optimisation des stratégies de contrôle. Le système cryogénique d'un détecteur de particules (CMS) a d'abord été simulé pour valider les modèles, puis un liquéfacteur d'...

CERN Technical Training - New courses available at CERN!

CERN Multimedia

HR Department

2010-01-01

1. - The “JavaScript for web development” is a 3 day course. This hands-on JavaScript training course provides the knowledge needed to design and develop dynamic web pages using JavaScript. It introduces students to JavaScript and how the language can be used to turn static HTML pages into dynamic, interactive web pages. Students will learn the syntax of the JavaScript language, the Document Object Model, form validation, cookies, how to create functions. This course is for Web programmers who want to learn how to make their Web pages more interactive by using JavaScript. The course will take place, in English, from 5 to 7 May 2010 in the CERN Technical Training Centre. Registrations are open on the Technical Training page. For more information on our catalogue or for questions/comments, contact us at Technical.Training@cern.ch 2. - The “Web 2.0 development with AJAX” is a 3 day course. This hands-on AJAX course provides the knowledge needed to design and develop ...

Important changes for cern.market and other newsgroups at CERN

CERN Multimedia

2007-01-01

The "cern.market" is moving to the web! You should now use http://cern.ch/cern.market to read and post messages. After 25 June it will no longer be possible to post messages from a newsreader. More generally, the CERN newsgroup service (news.cern.ch) will be progressively decommissioned in June/July 2007. The newsgroup functionality for CERN discussion forums such as the cern.market is moving to web-based discussion forums and RSS feeds. As of 9 July, public services will need to be used to access public newsgroups (those not starting with "cern"), as the internal news.cern.ch server will cease to provide them. Please read go there for more information. The Mail Services team

Redesign of CERN LINAC3 RFQ for Lead 29+

CERN Document Server

Benedetti, Stefano; Lallement, Jean-Baptiste; Lombardi, Alessandra; CERN. Geneva. ATS Department

2018-01-01

CERN Linac3 is at the heart of the CERN Heavy Ion Facility, providing 4.2 MeV/u ion beams to the Low Energy Ion Ring (LEIR). It mostly accelerates 208Pb29+, though in recent years runs were performed with 40Ar11+ and 129Xe22+, in view of the raising interest of the physics community towards lighter ions experiments. In the framework of the LHC Injectors Upgrade (LIU) project, measurements and beam dynamics simulations showed that a transmission bottleneck of Linac3 is represented by the RFQ. As this accelerator was originally designed for 208Pb25+, the lower beam rigidity of the heavy ions currently in used – and planned to be used – permits a redesign of the RFQ aimed at increasing its transverse acceptance, and thus the transmitted beam current. The methodology adopted and the results of this study are presented.

The Evolution of CERN EDMS

CERN Document Server

Wardzinska, Aleksandra; Bray, Rachel; Delamare, Christophe; Arza, Griselda Garcia; Krastev, Tsvetelin; Pater, Krzysztof; Suwalska, Anna; Widegren, David

2015-01-01

Large-scale long-term projects such as the LHC require the ability to store, manage, organize and distribute large amounts of engineering information, covering a wide spectrum of fields. This information is a living material, evolving in time, following specific lifecycles. It has to reach the next generations of engineers so they understand how their predecessors designed, crafted, operated and maintained the most complex machines ever built.This is the role of CERN EDMS. The Engineering and Equipment Data Management Service has served the High Energy Physics Community for over 15 years. It is CERN's official PLM (Product Lifecycle Management), supporting engineering communities in their collaborations inside and outside the laboratory. EDMS is integrated with the CAD (Computer-aided Design) and CMMS (Computerized Maintenance Management) systems used at CERN providing tools for engineers who work in different domains and who are not PLM specialists.Over the years, human collaborations and machines grew in si...

The design, construction and commissioning of the CERN Large Electron-Positron collider

International Nuclear Information System (INIS)

Myers, S.; Picasso, E.

1990-01-01

A description is given of the most important parameters considered in the design of the CERN Large Electron-Positron collider. It is shown how these parameters affect the collider performance and how they have been optimised with respect to the cost of the project. The functioning of each major subsystem is described with respect to its role as part of the collider. Finally, the planning, testing and initial commissioning of LEP is described and possible future developments are outlined. (author)

ATLAS@Home looks for CERN volunteers

CERN Multimedia

Rosaria Marraffino

2014-01-01

ATLAS@Home is a CERN volunteer computing project that runs simulated ATLAS events. As the project ramps up, the project team is looking for CERN volunteers to test the system before planning a bigger promotion for the public.   The ATLAS@home outreach website. ATLAS@Home is a large-scale research project that runs ATLAS experiment simulation software inside virtual machines hosted by volunteer computers. “People from all over the world offer up their computers’ idle time to run simulation programmes to help physicists extract information from the large amount of data collected by the detector,” explains Claire Adam Bourdarios of the ATLAS@Home project. “The ATLAS@Home project aims to extrapolate the Standard Model at a higher energy and explore what new physics may look like. Everything we’re currently running is preparation for next year's run.” ATLAS@Home became an official BOINC (Berkeley Open Infrastructure for Network ...

Space-Charge Experiments at the CERN Proton Synchrotron

CERN Document Server

Franchetti, Giuliano; Hofmann, I; Martini, M; Métral, E; Qiang, J; Ryne, D; Steerenberg, R; CFA Beam Dynamics Workshop “High Intensity and Brightness Hadron Beams”

2005-01-01

Benchmarking of the simulation codes used for the design of the next generation of high beam power accelerators is of paramount importance due to the very demanding requirements on the level of beam losses. This is usually accomplished by comparing simulation results against available theories, and more importantly, against experimental observations. To this aim, a number of well-defined test cases, obtained by accurate measurements made in existing machines, are of great interest. Such measurements have been made in the CERN Proton Synchrotron to probe three space-charge effects: (i) transverse emittance blow-up due to space-charge induced crossing of the integer or half-integer stop-band, (ii) space-charge and octupole driven resonance trapping, and (iii) intensity-dependent emittance transfer between the two transverse planes. The last mechanism is discussed in detail in this paper and compared to simulation predictions.

Design Study for a Future Laguna-LBNO Long-Baseline Neutrino Facility at CERN

CERN Document Server

Alabau-Gonzalvo, J; Antoniou, F; Benedikt, M; Calviani, M; Efthymiopoulos, I; Ferrari, A; Garoby, R; Gerigk, F; Gilardoni, S; Goddard, B; Kosmicki, A; Lazaridis, C; Osborne, J; Papaphillippou, Y; Parfenova, A; Shaposhnikova, E; Steerenberg, R; Velten, P; Vincke, H

2013-01-01

The Large Apparatus studying Grand Unification and Neutrino Astrophysics (LAGUNA) study [1] investigated seven pre-selected underground sites in Europe (Finland, France, Italy, Poland, Romania, Spain and UK), capable of housing large volume detectors for terrestrial, accelerator generated and astrophysical neutrino research. The study was focused on geo-technical assessment of the sites, concluding that no show-stoppers exist for the construction of the required large underground caverns in the chosen sites. The LAGUNA-LBNO FP7/EC-funded design study extends the LAGUNA study in two key aspects: the detailed engineering of detector construction and operation, and the study of a long-baseline neutrino beam from CERN, and possibly other accelerator centres in Europe. Based on the findings of the LAGUNA study, the Pyh¨asalmi mine in Finland is chosen as prime site for the far detector location. The mine offers the deepest underground location in Europe (-1400 m) and a baseline of 2’300 km from CERN (Fig. 1). ...

BEAM LINE DESIGN FOR THE CERN HIRADMAT TEST FACILITY

CERN Document Server

Hessler, C; Goddard, B; Meddahi, M; Weterings, W

2009-01-01

The LHC phase II collimation project requires beam shock and impact tests of materials used for beam intercepting devices. Similar tests are also of great interest for other accelerator components such as beam entrance/exit windows and protection devices. For this purpose a dedicated High Radiation Material test facility (HiRadMat) is under study. This facility may be installed at CERN at the location of a former beam line. This paper describes the associated beam line which is foreseen to deliver a 450 GeV proton beam from the SPS with an intensity of up to 3×1013 protons per shot. Different beam line designs will be compared and the choice of the beam steering and diagnostic elements will be discussed, as well as operational issues.

Beam Line Design for the CERN Hiradmat Test Facility

CERN Document Server

Hessler, C; Goddard, B; Meddahi, M; Weterings, W

2010-01-01

The LHC phase II collimation project requires beam shock and impact tests of materials used for beam intercepting devices. Similar tests are also of great interest for other accelerator components such as beam entrance/exit windows and protection devices. For this purpose a dedicated High Radiation Material test facility (HiRadMat) is under study. This facility may be installed at CERN at the location of a former beam line. This paper describes the associated beam line which is foreseen to deliver a 450 GeV proton beam from the SPS with an intensity of up to 3×10**13 protons per shot. Different beam line designs will be compared and the choice of the beam steering and diagnostic elements will be discussed, as well as operational issues.

New website dealing with CERN-EU relations

CERN Multimedia

2005-01-01

A new website dealing with CERN-EU relations (cern.ch/EU) is being brought into production. Thanks are due to several people for their contributions, and especially to the primary authors - Piotr Kurpiel, a Technical Student, and Miguel Marquina / IT. This site is designed to help people looking for information concerning interactions between Europe and particle physics in general, and the CERN programme in particular. FACILITIES AVAILABLE TO THE PUBLIC For members of the public, links are provided to several websites of general interest and there is also a search facility to help navigation among the main sources of information on EU programmes. FACILITIES ONLY AVAILABLE TO CERN USERS Entry to the CERN area of the site requires authentication via your NICE login name and password. In this area: You can look at information about present or past EU co-funded projects at CERN. For projects with their own websites you can click through to the site to obtain more detailed information. You can subscribe to ...

Design study of an ERL Test Facility at CERN

CERN Document Server

Jensen, E; Brüning, O; Calaga, R; Catalan-Lasheras, N; Goddard, B; Klein, M; Torres-Sanchez, R; Valloni, A

2014-01-01

The modern concept of an Energy Recovery Linac allows providing large electron currents at large beam energy with low power consumption. This concept is used in FEL’s, electron-ion colliders and electron coolers. CERN has started a Design Study of an ERL Test Facility with the purpose of 1) studying the ERL principle, its specific beam dynamics and operational issues, as relevant for LHeC, 2) providing a test bed for superconducting cavity modules, cryogenics and integration, 3) studying beam induced quenches in superconducting magnets and protection methods, 4) providing test beams for detector R&D and other applications. It will be complementary to existing or planned facilities and is fostering international collaboration. The operating frequency of 802 MHz was chosen for performance and for optimum synergy with SPS and LHC; the design of the cryomodule has started. The ERL Test Facility can be constructed in stages from initially 150 MeV to ultimately 1 GeV in 3 passes, with beam currents of up to 8...

TEDx Organisers meet at CERN

CERN Multimedia

Abha Eli Phoboo

2013-01-01

CERN hosted the second TEDx European Organisers meeting last week with around 80 organisers attending from all over Europe. They were given an introduction to CERN and a tour of the LHC experiments.   The participants of the TEDx European Organisers meeting held at CERN last week. Among the attendees was Bruno Giussani, European director of TED, who delivered the welcome address. The TEDx European organisers shared their experiences in workshops and brainstormed about how to work on different aspects of organising a TEDx event, and about improving the relationship between TEDx and TED. “The goal of this meeting was for veteran TEDx organisers to help younger ones, help each other, bring the community together and have better quality events,” said Claudia Marcelloni, head of TEDxCERN. TEDx is an independently organised TED (Technology, Entertainment, Design) talk event, which has grown exponentially all over the world. There are hundreds of TEDx events every day and it n...

A brief history of CERN

International Nuclear Information System (INIS)

Jacob, M.

2004-01-01

This article draws a brief history of CERN that has just celebrated its jubilee. Today 20 member states contribute to its annual budget that reached 650 million euros in 2004. In 1954 CERN was created by 12 founder states for mainly 3 reasons: 1) to achieve a research facility dedicated to particle physics able to compete with its American counterparts and that no European country could afford alone, 2) to generate with scientific research an example and a promoter for future international collaborations, and 3) to make scientists from different countries that were at war a few years before, to work together. The creation of CERN has not led to a decline of national laboratories as it was feared in the fifties. On the contrary scientific and technical tasks have been dispatched: CERN provides member states with accelerator facilities while national laboratories and universities contribute to the design and fabrication of detectors and to the analysis of experimental data. The history of CERN is marked by 2 main scientific milestones, first the discovery of weak interaction through neutral currents in 1973 and secondly the discovery of W and Z bosons in 1983. (A.C.)

Proposal for the award of a contract for provision of mechanical design and draughting services off the CERN site

CERN Document Server

2004-01-01

This document concerns the award of a contract for the provision of mechanical design and draughting services off the CERN site. Following a market survey carried out among 62 firms in fifteen Member States, a call for tenders (IT-3213/EST) was sent on 19 January 2004 to eight firms, in seven Member States. By the closing date, CERN had received eight tenders from eight firms in seven Member States. The Finance Committee is invited to agree to the negotiation of a contract with ACROTECNA (FR), the lowest bidder, for the provision of mechanical design and draughting services off the CERN site for an amount of 489 373 euros (771 882 Swiss francs) for an initial period of three years starting on 1 July 2004, subject to revision for inflation from 1 July 2007. The rate of exchange used is that stipulated in the tender. The contract will include options for two one-year extensions beyond the initial three-year period. The firm has indicated the following distribution by country of the contract value covered by thi...

CERN Technical Training 2006: ANSYS Course Sessions (August-September 2006)

CERN Multimedia

2006-01-01

The following ANSYS course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2006, and in collaboration with CAD-FEM AG (CH): ANSYS Design Modeler (course in French): 29-30.8.2006 (2 days) ANSYS Workbench (course in French): 12-15.9.2006 (4 days, only 2 places available) If you are interested in attending any of the above course sessions, please discuss with your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at under "Upcoming course sessions", with the detailed course programmes. The complete training offer of ANSYS courses at CERN can be found at the same website, under the Mechanical Design curriculum. CERN Technical Training courses are open only to the members of CERN personnel (staff members and fellows; associates, students, users, project associates; apprentices: employees of CERN contractors, with some restrictions). In particular, quoted prices and programmes refer specifically to the CERN ...

Numerical simulations of mixing conditions and aerosol dynamics in the CERN CLOUD chamber

CERN Document Server

Voigtländer, J; Rondo, L; Kürten, A; Stratmann, F

2012-01-01

To study the effect of galactic cosmic rays on aerosols and clouds, the Cosmics Leaving OUtdoor Droplets (CLOUD) project was established. Experiments are carried out at a 26.1 m3 tank at CERN (Switzerland). In the experiments, the effect of ionizing radiation on H2SO4 particle formation and growth is investigated. To evaluate the experimental configuration, the experiment was simulated using a coupled multidimensional computational fluid dynamics (CFD) – particle model. In the model the coupled fields of gas/vapor species, temperature, flow velocity and particle properties were computed to investigate mixing state and mixing times of the CLOUD tank's contents. Simulation results show that a 1-fan configuration, as used in first experiments, may not be sufficient to ensure a homogeneously mixed chamber. To mix the tank properly, two fans and sufficiently high fan speeds are necessary. The 1/e response times for instantaneous changes of wall temperature and saturation ratio were found to be in the order of fe...

Integrated Design of Superconducting Magnets with the CERN Field Computation Program ROXIE

CERN Document Server

Russenschuck, Stephan; Bazan, M; Lucas, J; Ramberger, S; Völlinger, Christine

2000-01-01

The program package ROXIE has been developed at CERN for the field computation of superconducting accelerator magnets and is used as an approach towards the integrated design of such magnets. It is also an example of fruitful international collaborations in software development.The integrated design of magnets includes feature based geometry generation, conceptual design using genetic optimization algorithms, optimization of the iron yoke (both in 2d and 3d) using deterministic methods, end-spacer design and inverse field calculation.The paper describes the version 8.0 of ROXIE which comprises an automatic mesh generator, an hysteresis model for the magnetization in superconducting filaments, the BEM-FEM coupling method for the 3d field calculation, a routine for the calculation of the peak temperature during a quench and neural network approximations of the objective function for the speed-up of optimization algorithms, amongst others.New results of the magnet design work for the LHC are given as examples.

Design and fabrication of the prototype superconducting quadrupole for the CERN LHC project

International Nuclear Information System (INIS)

Baze, J.M.; Cacaut, D.; Jacquemin, J.P.; Lyraud, C.; Michez, C.; Pabot, Y.; Perot, J.; Rifflet, J.M.; Toussaint, J.C.; Vedrine, P.

1992-01-01

Within the framework of the LHC R and D program, CERN and CEA/Saclay have established a collaboration to carry out, amongst others, the design, building and testing of a superconducting LHC prototype quadrupole at the Saclay laboratory. The cold mass of this quadrupole is presently under construction at Saclay. The quadrupole design features a twin aperture configuration, a gradient design features a twin aperture configuration, a gradient of 250T/m, a length of 3m and a free coil aperture of 56mm. European industries participate in this project by delivering components and fabrication the tooling according to specifications prepared by Saclay. This paper gives details of the magnet design and construction. Coil winding will start in summer 1991 and the first prototype should be assembled and ready for testing by mid 1992

Control system design of the CERN/CMS tracker thermal screen

CERN Document Server

Carrone, E

2003-01-01

The Tracker is one of the CMS (Compact Muon Solenoid experiment) subdetectors to be installed at the LHC (Large Hadron Collider) accelerator, scheduled to start data taking in 2007 at CERN (European Organization for Nuclear Research). The tracker will be operated at a temperature of -10 degree C in order to reduce the radiation damage on the silicon detectors; hence, an insulated environment has to be provided by means of a screen that introduces a thermal separation between the Tracker and the neighboring detection systems. The control system design includes a formal description of the process by means of a thermodynamic model; then, the electrical equivalence is derived. The transfer function is inferred by the ratio of the voltage on the outer skin and the voltage input, i.e. the ratio of the temperature outside the tracker and the heat generated (which is the controlled variable). A PID (Proportional Integral Derivative) controller has been designed using MatLab. The results achieved so far prove that thi...

Minimizing the background radiation in the new neutron time-of-flight facility at CERN FLUKA Monte Carlo simulations for the optimization of the n_TOF second experimental line

CERN Document Server

Bergström, Ida; Elfgren, Erik

2013-06-11

At the particle physics laboratory CERN in Geneva, Switzerland, the Neutron Time-of-Flight facility has recently started the construction of a second experimental line. The new neutron beam line will unavoidably induce radiation in both the experimental area and in nearby accessible areas. Computer simulations for the minimization of the background were carried out using the FLUKA Monte Carlo simulation package. The background radiation in the new experimental area needs to be kept to a minimum during measurements. This was studied with focus on the contributions from backscattering in the beam dump. The beam dump was originally designed for shielding the outside area using a block of iron covered in concrete. However, the backscattering was never studied in detail. In this thesis, the fluences (i.e. the flux integrated over time) of neutrons and photons were studied in the experimental area while the beam dump design was modified. An optimized design was obtained by stopping the fast neutrons in a high Z mat...

Security scanning of Web sites at CERN

CERN Multimedia

IT Department

2010-01-01

As of early 2010, the CERN Computer Security Team will start regular scanning of all Web sites and Web applications at CERN, visible on the Internet, or on the General Purpose Network (office network). The goal of this scanning is to improve the quality of CERN Web sites. All deficits found will be reported by e-mail to the relevant Web site owners, and must be fixed in a timely manner. Web site owners may also request one-off scans of their Web site or Web application, by sending an e-mail to Computer.Security@cern.ch. These Web scans are designed to limit the impact on the scanned Web sites. Nevertheless, in very rare cases scans may cause undesired side-effects, e.g. generate a large number of log entries, or cause particularly badly designed or less robust Web applications to crash. If a Web site is affected by these security scans, it will also be susceptible to any more aggressive scan that can be performed any time by a malicious attacker. Such Web applications should be fixed, and also additionally...

Open-science projects get kickstarted at CERN

CERN Multimedia

Achintya Rao

2015-01-01

CERN is one of the host sites for the Mozilla Science Lab Global Sprint to be held on 4 and 5 June, which will see participants around the world work on projects to further open science and educational tools.   IdeaSquare will be hosting the event at CERN. The Mozilla Science Lab Global Sprint was first held in 2014 to bring together open-science practitioners and enthusiasts to collaborate on projects designed to advance science on the open web. The sprint is a loosely federated event, and CERN is participating in the 2015 edition, hosting sprinters in the hacker-friendly IdeaSquare. Five projects have been formally proposed and CERN users and staff are invited to participate in a variety of ways. A special training session will also be held to introduce the CERN community to existing open-science and collaborative tools, including ones that have been deployed at CERN. 1. GitHub Science Badges: Sprinters will work on developing a badge-style visual representation of how open a software pro...

Electromagnetic simulations for non-ultrarelativistic beams and applications to the CERN low energy machines

CERN Document Server

Zannini, C; Rumolo, G; Rijoff, T

2014-01-01

In the framework of the PS-Booster upgrade project an accurate impedance model is needed in order to determine the effect on the beam stability and assess the impact of the new devices to be installed in the machine. CST 3-D EM simulations are widely used to estimate the impedance contribution of the different devices along the CERN accelerator complex. Unlike the highly relativistic case, in which the reliability of the EM solver has been proved in many specific cases by comparing simulations with analytical results, the nonrelativistic case has been so far not yet benchmarked. In order to use systematically CST 3-D EM simulations for the PS-Booster, or even lower energy machines like the antiproton decelerator ELENA, a validation campaign has been carried out. The main complication to single out the beam coupling impedance, as resulting from the interaction of the beam with the surroundings, consisted of removing reliably the strong contribution of the direct space charge of the source bunch, which is inclu...

Britain at CERN

CERN Multimedia

2000-01-01

H. E. Mr Christopher Hulse, Ambassador of United Kingdom in Switzerland, CERN Director General Luciano Maiani, Sir David Wright, Chief Executive of British Trade International and Roger Cashmore, CERN Director of research visit the Britain at CERN exhibition. From 14 to 17 November 30 British companies exhibited leading edge technologies at CERN. This is Britain's 18th exhibition at CERN since 1968. Out of the 30 companies, which attended the Britain at CERN exhibition in 1998, 25 have received an order or a contract relating to CERN during the last two years. The exhibition was inaugurated on Tuesday by Sir David Wright, Chief Executive of British Trade International. He was accompanied by H.E. Mr Christopher Hulse CMG, OBE, Her Majesty's Ambassador to Switzerland, and Mr. David Roberts, Deputy Head of Mission and Director of Trade Promotion at the British Embassy in Bern. CERN Director-General, Professor Luciano Maiani, underlined the major contribution of British physicists to CERN, pointing out the fact ...

CERN safety week

CERN Multimedia

DG Unit

2009-01-01

Following an increase in the number of accidents in 2008, the Safety Commission is organising a CERN safety week from 8 to 12 June for riders of bicycles, scooters and motorbikes. We invite you to take part in the programme, which will be held in the Main Building (Bldg. 500) and will consist of an exhibition, organised events and hands-on activities, including demonstrations of emergency braking, a driving simulator, simulation of what it feels like to drive under the influence of alcohol, demonstrations by the Fire Brigade, video projections, etc. There will also be a number of prizes to be won. Please sign up via your DSO.

Simulation of Instability at Transition Energy with a New Impedance Model for CERN PS

CERN Document Server

Wang, Na; Biancacci, Nicolo; Migliorati, Mauro; Persichelli, Serena; Sterbini, Guido

2016-01-01

Instabilities driven by the transverse impedance are proven to be one of the limitations for the high intensity reach of the CERN PS. Since several years, fast single bunch vertical instability at transition energy has been observed with the high intensity bunch serving the neu-tron Time-of-Flight facility (n-ToF). In order to better understand the instability mechanism, a dedicated meas-urement campaign took place. The results were compared with macro-particle simulations with PyHEADTAIL based on the new impedance model developed for the PS. Instability threshold and growth rate for different longitu-dinal emittances and beam intensities were studied.

A future for computational fluid dynamics at CERN

CERN Document Server

Battistin, M

2005-01-01

Computational Fluid Dynamics (CFD) is an analysis of fluid flow, heat transfer and associated phenomena in physical systems using computers. CFD has been used at CERN since 1993 by the TS-CV group, to solve thermo-fluid related problems, particularly during the development, design and construction phases of the LHC experiments. Computer models based on CFD techniques can be employed to reduce the effort required for prototype testing, saving not only time and money but offering possibilities of additional investigations and design optimisation. The development of a more efficient support team at CERN depends on to two important factors: available computing power and experienced engineers. Available computer power IS the limiting resource of CFD. Only the recent increase of computer power had allowed important high tech and industrial applications. Computer Grid is already now (OpenLab at CERN) and will be more so in the future natural environment for CFD science. At CERN, CFD activities have been developed by...

Freeing up access to CERN technology

CERN Multimedia

Joannah Caborn Wengler

2012-01-01

In line with CERN’s principle of maximising the dissemination of knowledge to society, the Knowledge Transfer (KT) Group has launched a new collaborative initiative to share the products of CERN’s scientific and technological labours: Easy Access IP, where IP stands for intellectual property.   CERN has a whole portfolio of dissemination channels designed and implemented by the KT Group, with Easy Access IP being the latest addition. “Inspired by the UK’s Easy Access Innovation initiative, our scheme involves making some of CERN's technologies available royalty-free and through a more agile licensing process,” explains Giovanni Anelli, head of the Group. “This approach seems to be an appropriate model for CERN, where the ultimate goal of technology transfer is not to generate income but to transfer knowledge to external partners.” The new scheme, as the name suggests, is designed to make it easier for industry and othe...

Princess of Thailand returns to CERN

CERN Multimedia

Stefania Pandolfi

2015-01-01

On Tuesday, 17 November 2015, HRH Princess Maha Chakri Sirindhorn of Thailand visited CERN. Princess Sirindhorn was visiting the Laboratory for the fifth time, following her last visit in 2010.   Princess Maha Chakri Sirindhorn of Thailand (center) witnesses the signing of the collaboration agreement between CERN and SLRI, represented by Rolf Heuer (right) and Professor Sarawut Sujitjorn (left) respectively. The Princess was accompanied by a delegation that included the Director of the Synchrotron Light Research Institute (SLRI) in Thailand, Professor Sarawut Sujitjorn, and a large group of Thailand’s Diplomatic Representatives in Switzerland. Upon her arrival, Princess Sirindhorn was welcomed by CERN Director-General Rolf Heuer and the Director-General Designate, Fabiola Gianotti. At CERN, the Princess was given a brief update on the Laboratory’s activities since her last visit, in April 2010. Later on, she witnessed the signature of the f...

30 CERN

Energy Technology Data Exchange (ETDEWEB)

Anon.

1984-11-15

September marked the 30th Anniversary of the coming into force of the Convention establishing the European Organization for Nuclear Research (CERN). A formal ceremony, attended by the King of Spain, was the highlight of the celebrations. Throughout the month, an exhibition of many of the important documents from CERN's early history (including the original Convention, kindly loaned by UNESCO, with the signatures of representatives of the twelve founding States) was presented at CERN. A concert by the Geneva Orchestre de la Suisse Romande was given in CERN's honour. An Open Day at the Laboratory drew thousands of visitors. A full day's 'history seminar' enabled a team presently working on CERN history to consult with many of the pioneers.

All change at the CERN UBS branch

CERN Multimedia

Antonella Del Rosso

2012-01-01

UBS branches across the country are being modernised, and the CERN branch is no exception. The Bulletin brings you a preview of the project, which will get under way in January 2013.   Mock-up of the renovated UBS branch. The changes at the UBS branch in CERN's Main Building will be no simple facelift. The entire bank will be renovated, transforming the present relatively confined premises into an open and attractive area. "The renovation of the UBS branches is part of a wider campaign designed to further enhance our customer relations," explains Ezio Mangia, the head of the CERN branch.  The UBS bank currently occupies three sets of premises in CERN's Main Building (two on the ground floor and one in the basement). "By the end of the work, which is scheduled to be completed by the middle of next year, CERN customers will benefit from a new area with open-plan counters and "hole-in-the-wall" machines accessible to...

Looking at CERN from a different perspective

CERN Multimedia

Jordan Juras

2011-01-01

Although the vast majority of students at CERN study and work on projects in the physics, engineering or IT fields, there are some who come to use CERN as a subject to complement their research in other fields. Larissa Kuchina, a graphic design student, and Jérôme Wohlschlag, an architectural student, completed their degrees and their dissertations on unusual aspects of the Laboratory. Both offer valuable perspectives that are not necessarily the ones we usually encounter.   Top: Aerial vue of the CERN site in 1961 (CERN archive). Bottom: Photo of the Master's project model. Recently, Jérôme Wohlschlag featured CERN in his dissertation for his Master’s degree in architecture at the Ecole Polytechnique Fédérale de Lausanne. Developed with the help of Professor Franz Graf’s TSAM Laboratoire des Techniques et de la Sauveguard de L’Architecture Moderne, Jérôme’s project focuse...

Haute-Savoie at CERN

CERN Multimedia

2003-01-01

From 10 to 14 November, twenty-two companies presented their latest technology at the Haute-Savoie exhibition at CERN. With hedges of green plants, wooden lawn chairs, and even a small fountain like the ones near mountain chalets, the exhibitors transformed the hall of the main building into a little natural corner. They not only brought local flair but also a multitude of interesting information about their know-how of innovative technologies. In addition to the exhibition, presentations on topics ranging from multiplexing over materials to nano-technologies were given at the end of each afternoon in the Council Chamber. One of the exibitors at the "Haute-Savoie at CERN" shows (from left to right) Roland Pascal, Service Director General of the Haute-Savoie Département, Claude Birraux, Vice-President of the general council of Haute-Savoie and Member of the French Parliament, Robert Aymar, designated CERN Director General, and Ernest Nycollin, President of the general council of Haute-Savoie one of the stand...

Proposal for the award of two contracts for the provision of mechanical design and draughting services on and off the CERN Site

CERN Document Server

2006-01-01

This document concerns the award of two contracts for the provision of mechanical design and draughting services on and off the CERN site. The Finance Committee is invited to agree to the negotiation of two contracts with: 1. ACROTECNA (FR), the lowest bidder, for approximately 55% of the provision of mechanical design and draughting services on and off the CERN site, for a period of three years for a total amount not exceeding 794 200 euros (1 239 006 Swiss francs), not subject to revision. The contract will include options for two one-year extensions beyond the initial three-year period. The rate of exchange used is that stipulated in the tender. 2. TECNICAS AERONAUTICAS MADRID (ES), the joint lowest bidder after alignment, for approximately 45% of the provision of mechanical design and draughting services on and off the CERN site, for a period of three years for a total amount not exceeding 1 013 730 Swiss francs, not subject to revision. The contract will include options for two one-year extensions beyond...

CERN Webfest: A weekend for science on the web

CERN Multimedia

CERN Bulletin

2013-01-01

Are you passionate about science? Do you like communicating that passion to the general public? Then come along to the CERN Summer Student Webfest on the weekend of 3-4 August! It is a grassroots initiative by the summer students, open to all staff and users, and aims to spark new ideas that could innovate the future of web-based education about CERN, the LHC and particle physics.   The CERN Summer Student Webfest is a weekend of online web-based creativity modelled on the gatherings (sometimes called hackfests or hackathons) that energize many open-source communities. You can work with like-minded students and CERN staff to design and build demos of the web apps you would like to see online. Prizes will be awarded to the best projects, with a Grand Prize winner receiving a trip to the Mozilla Festival in London! Participants in the CERN Summer Student Webfest will work in teams and design neat applications that encourage the public to learn more about science and, in particular, CE...

CERN Rocks

CERN Multimedia

2004-01-01

The 15th CERN Hardronic Festival took place on 17 July on the terrace of Rest 3 (Prévessin). Over 1000 people, from CERN and other International Organizations, came to enjoy the warm summer night, and to watch the best of the World's High Energy music. Jazz, rock, pop, country, metal, blues, funk and punk blasted out from 9 bands from the CERN Musiclub and Jazz club, alternating on two stages in a non-stop show.  The night reached its hottest point when The Canettes Blues Band got everybody dancing to sixties R&B tunes (pictured). Meanwhile, the bars and food vans were working at full capacity, under the expert management of the CERN Softball club, who were at the same time running a Softball tournament in the adjacent "Higgs Field". The Hardronic Festival is the main yearly CERN music event, and it is organized with the support of the Staff Association and the CERN Administration.

CERN Choir

CERN Multimedia

Staff Association

2015-01-01

  Do you like singing? The CERN Choir is looking for basses and tenors Join us! Programme Spring Session 2015: Donizetti: Misere & Missa di Gloria e Credo Bellini: Salve Regina Bruckner: Requiem in D minor Next concert: Sunday 31 May 2015 at 17:00 Musicales de Comesières (GE) Rehearsals at CERN Main Auditorium, building 500 On Wednesdays from 20.00 to 22:00 Membership fee: January to June 150 CHF September to December: 100CHF Contact: Baudouin.bleus@cern.ch Facebook/Choeur-du-CERN

30 CERN

International Nuclear Information System (INIS)

Anon.

1984-01-01

September marked the 30th Anniversary of the coming into force of the Convention establishing the European Organization for Nuclear Research (CERN). A formal ceremony, attended by the King of Spain, was the highlight of the celebrations. Throughout the month, an exhibition of many of the important documents from CERN's early history (including the original Convention, kindly loaned by UNESCO, with the signatures of representatives of the twelve founding States) was presented at CERN. A concert by the Geneva Orchestre de la Suisse Romande was given in CERN's honour. An Open Day at the Laboratory drew thousands of visitors. A full day's 'history seminar' enabled a team presently working on CERN history to consult with many of the pioneers

Status of the ATLAS experiment at CERN

International Nuclear Information System (INIS)

Taylor, G.

2000-01-01

Full text: The ATLAS experiment, to operate at CERN's Large Hadron Collider (LHC), from 2005 is currently under construction. The Australian HEP Consortium is participating in the development and construction of the semi-conductor tracker (SCT) sub-system of ATLAS. Australian scientists play significant roles in many aspects of the SCT detector module development, including design, prototyping, measurement, beam tests and simulation. Production facilities for construction of two hundred high precision detector modules for the SCT Forward region are well advanced in Melbourne and Sydney laboratories. This talk will give an overview of ATLAS experiment goals and status. It will concentrate on the Australian contribution. The talk will conclude with an outline of the future schedule and plans

The IEEE Milestone event at CERN

CERN Multimedia

2005-01-01

On the initiative of its French and Swiss Sections, the IEEE has honoured CERN with an 'IEEE Milestone in the history of electricity and electronics' for the invention of the multi-wire proportional chamber in 1968. The IEEE established the Electrical Engineering Milestones programe in 1983 to honour significant achievements in the history of electrical and electronics engineering. To be designated, an achievement must be at least 25 years old, must have involved a unique solution to an engineering problem, and must have had at least regional impact. Currently there are more than  50 IEEE Milestones around the world. http://www.ieee.org/organizations/history_center/cern.html The installation and unveiling of this IEEE Milestone will provide the opportunity to emphasize the close relationship between science, technology, industry and well-being in society.  A ceremony, organised with the support of a group of IEEE members working at CERN, will be held at the CERN Globe of Science and Inn...

CERN: Accelerator school

International Nuclear Information System (INIS)

Anon.

1993-01-01

Full text: Jyvaskyla, a university town in central Finland, was the setting for last year's General Accelerator School organized by the CERN Accelerator School. Well over a hundred students - more than for some time - followed two weeks of lectures on a broad spectrum of accelerator topics, the first step en route to becoming the designers, builders and operators of the surprisingly large number of, accelerators of all kinds either built or planned throughout Europe and further afield. This was the fifth such school organized by CAS in a biennial cycle which alternates this introductory level with more advanced tuition. The next, advanced, school will be from 20 October - 1 November, hosted by Athens University on the Greek Island of Rhodes. (Application details will become available in Spring but would-be participants should already reserve the dates.) After Finland, the CAS caravan moved to Benalmadena near Malaga in Spain where, together with Seville University, they organized one of the joint US-CERN schools held every two years and focusing on frontier accelerator topics. This time the subject was electron-positron factories - machines for high luminosity experiments in phi, tau-charm, beauty and Z physics. Experts from both sides of the Atlantic and from Japan shared their knowledge with an equally representative audience and probed the many intensity related phenomena which must be mastered to reach design performance. A number of these topics will receive extended coverage in the next specialist CAS School which is a repeat - by public demand - of the highly successful radiofrequency course held in Oxford in 1991. This school will be in Capri, Italy, with the support of the University of Naples from 29 April to 5 May. Details and application forms are now available by e-mail (CASRF@CERNVM.CERN.CH), by fax (+41 22 7824836) or from Suzanne von Wartburg, CERN Accelerator School, 1211 Geneva 23, Switzerland

Llewellyn Smith, Director-General designate of CERN, discusses LHC

CERN Multimedia

Sweet, William N

1992-01-01

Christopher Llewellyn Smith was nominated by the Committee of Council to be Director General of CERN. He aims to pave the way for the Large Hadron Collider and utilize to the full the Large Electron-Positron machine.

CERN panel calls for cuts and shake-ups

CERN Multimedia

Weiss, G

2002-01-01

An external review committee has proposed that CERN slash other research projects in order to finish the LHC. The report of the ERC praised the design of the LHC and the technical competence of CERN staff. However it criticized the lab for "serious weaknesses" in cost control, contract management and financial reporting (1 page).

All Digital IQ Servo-System for CERN Linacs

CERN Document Server

Broere, J; Garoby, R; Rohlev, A; Serrano, J

2004-01-01

A VME based control system has been developed and built at CERN for the servo loops regulating the field in linac accelerating structures. It is an all-digital system built on a single VME card, providing digital detection, processing, and modulation. It is foreseen to be used, in different versions, for the needs of both present and future CERN hadron linacs. The first application will be in the energy ramping RF chain of the CERN Heavy Ion Linac (linac 3). Design principle and the experimental results are described.

CERN Enters the Second Year AD

CERN Document Server

2001-01-01

2001 is the year that physics at CERN's new Antiproton Decelerator (AD) really gets up to speed. Changes to the AD since 2000 mean that this year the three experiments, ASACUSA, ATHENA, and ATRAP have had more intense antiproton beams to work with since physics started on 7 May. CERN's Antiproton Decelerator - major improvements for 2001. The AD is a unique machine. Its job is to decelerate not accelerate particle beams, and it has to handle beam energies that vary by an unprecedented factor of 35 from injection to ejection. Since the machine was designed to operate at fixed energy in its first incarnation as a collector of antiprotons for CERN's 1980s proton antiproton collider, this factor of 35 presented a big challenge to the AD team. The team's design goal was to hang onto a quarter of the injected antiprotons through their vertiginous fall in energy, and to repeat the deceleration cycle once per minute. Improvements to the machine over the winter shutdown and through the first four weeks of 2001 run...

Collide@CERN Geneva

CERN Multimedia

CERN. Geneva; Kieffer, Robert; Blas Temino, Diego; Bertolucci, Sergio; Mr. Decelière, Rudy; Mr. Hänni, Vincent

2014-01-01

CERN, the Republic and Canton of Geneva, and the City of Geneva are delighted to invite you to “Collide@CERN Geneva Music”. Come to the public lecture about collisions between music and particle physics by the third winners of Collide@CERN Geneva, Vincent Hänni & Rudy Decelière, and their scientific inspiration partners, Diego Blas and Robert Kieffer. The event marks the beginning of their residency at CERN, and will be held at the CERN Globe of Science and Innovation on 16 October 2014 at 19.00. Doors will open at 18.30.

CERN Photo club

CERN Multimedia

CERN Photo club

2016-01-01

The CERN Photo Club organizes in collaboration with Canon Switzerland a photo contest open to all members of the CERN (Persons with a CERN access card). The only restriction is that the photos must have been taken with a CANON camera (DSLR, bridge or compact) between 1 and 31 October 2016. Send your three best pictures at  Photo.Contest@cern.ch with a short description explaining the images. Further information on the Photo club website: http://photoclub.web.cern.ch/content/photo-contest-october-2016

CERN Cricket Club

CERN Multimedia

CERN Cricket Club

2010-01-01

CERN Cricket Club Match Reports The cricket season is well under way, despite the weather, and several matches have been played. The match reporters have, however, found it too difficult to limit their reports to ¼ of a page, hence the reports have not appeared in the bulletin. All reports can be found at http://cern.ch/Club-Cricket/reports/reports.html The list of forthcoming matches can be consulted at http://cern.ch/Club-Cricket/fixtures.html Further information about the CERN Cricket Club can be found at http://cern.ch/Club-Cricket/

CERN Cricket Club

CERN Document Server

CERN Cricket Club

2018-01-01

The CERN Cricket Club 2018 season begins soon, the first net practice is scheduled (weather permitting) for Thursday April 12th, at 18.00!  The club is always looking for new players and newcomers will be made very welcome. Anyone who is interested in joining the club should sign up on our web site: http://cern.ch/cricket/ or turn up for net practice, which takes place each Thursday evening (apart from CERN official holidays) until the end of September (starting at 18:00 to around 20:00) at the CERN Prévessin site: http://cern.ch/cricket/CERN-Ground.html The first matches will be in the Geneva T20 competition on Saturday and Sunday, April 14th / 15th. 

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 –Novelties\tE\t03.03\t1 d Sharepoint designer (Frontpage) – Niveau 2\tF\t05-06.03\t2 d CERN EDMS - Introduction\tF\t12.03\t1 d CERN EDMS for Engineers\tE\t20.03\t1 d CERN EDMS for Local Administrators\tE\t37.03\t1 d Word 2007 (Short course I: HowTo. work with AutoTasks)\tB\t31.03\t0.5 d Word 2007 (Short course II: HowTo mail merge)\tB\t31.03\t0.5 d SOFTWARE AND SYSTEM TECHNOLOGIES Java 2 Enterprise Edition – Part 1: Web Applications\tE\t03-04.03\t2 d Perl 5 – Introduction\tE\t05.03\t1 d JCOP – Joint PVSS\tE\t10-14.03\t4 d Python – Hands-on Introduction\tE\t26-28.03\t3 d ELECTRONIC DESIGN Electrostatique Discharge Protection ESD\tF\t29.2\t0.5 d Altium designer – migration for occasional PCAD users\tF\t04-06.03\t3 d LabVIEW Intermediaire 1\tF\t10-12.03...

1988 CERN school of computing

International Nuclear Information System (INIS)

Verkerk, C.

1989-01-01

These Proceedings contain written versions of most of the lectures delivered at the 1988 CERN School of Computing. Five lecture series concerned different aspects of parallel and vector processing: advanced computer architectures; parallel architectures for neurocomputers; Occam and transputers; vectorization of Monte Carlo code; and vectorization of high-energy physics code. Software engineering was the topic of three series of lectures: formal methods for program design; introduction to software engineering; and tutorial lectures on structured analysis and structured design. Lectures on data-acquisition and recording were followed by lectures on new techniques for data analysis in high-energy physics. Computer-assisted design of electronic systems, and silicon compilation and design synthesis for digital systems, were the topic of two other, closely related, lecture series. Lectures on accelerator controls and on robotics are also recorded in these Proceedings. Various other aspects of computing were covered in lectures on high-speed networks document preparation systems, interpersonal communication using computers, and on Fortran 8x. Two general lectures gave an introduction to high-energy physics at CERN. (orig.)

CERN honours Georges Charpak

CERN Multimedia

2009-01-01

CERN pays tribute to the work of Georges Charpak at a colloquium in honour of his 85th birthday. var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-0753-kbps-480x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-Multirate-200-to-753-kbps-480x360.wmv', 'false', 480, 360, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-posterframe-480x360-at-10-percent.jpg', '1167500', true, 'Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4'); Watch the video conference of Georges Charpak.   On 9 March CERN’s Main Auditorium was the venue for a fascinating and moving celebration marking the 85th birthday of Georges Charpak, who was awarded the Nobel Prize for Physics in 1992 for his inven...

Open Hardware For CERN's Accelerator Control Systems

CERN Document Server

van der Bij, E; Ayass, M; Boccardi, A; Cattin, M; Gil Soriano, C; Gousiou, E; Iglesias Gonsálvez, S; Penacoba Fernandez, G; Serrano, J; Voumard, N; Wlostowski, T

2011-01-01

The accelerator control systems at CERN will be renovated and many electronics modules will be redesigned as the modules they will replace cannot be bought anymore or use obsolete components. The modules used in the control systems are diverse: analog and digital I/O, level converters and repeaters, serial links and timing modules. Overall around 120 modules are supported that are used in systems such as beam instrumentation, cryogenics and power converters. Only a small percentage of the currently used modules are commercially available, while most of them had been specifically designed at CERN. The new developments are based on VITA and PCI-SIG standards such as FMC (FPGA Mezzanine Card), PCI Express and VME64x using transition modules. As system-on-chip interconnect, the public domain Wishbone specification is used. For the renovation, it is considered imperative to have for each board access to the full hardware design and its firmware so that problems could quickly be resolved by CERN engineers or its ...

CERN Video News

CERN Document Server

2003-01-01

From Monday you can see on the web the new edition of CERN's Video News. Thanks to a collaboration between the audiovisual teams at CERN and Fermilab, you can see a report made by the American laboratory. The clip concerns the LHC magnets that are being constructed at Fermilab. Also in the programme: the spectacular rotation of one of the ATLAS coils, the arrival at CERN of the first American magnet made at Brookhaven, the story of the discovery 20 years ago of the W and Z bosons at CERN. http://www.cern.ch/video or Bulletin web page.

Britain at CERN

CERN Multimedia

CERN Press Office. Geneva

1996-01-01

On 8 October, H.E. Mr David Beattie, British Ambassador to Switzerland, Mr John R. Nichols, H.M. Consul-General in Geneva and, Prof. Christopher Llewellyn Smith, CERN*'s Director General, formally opened the industrial exhibition of thirty-three British hi-tech companies at CERN, which takes place from 8 to 11 October, 1996. The exhibition offers British companies the opportunity to display their products in fields that are of immediate importance to the scientists, engineers and technicians working at CERN, and also to scientists from non-Member States who take part in research projects at CERN.

The MedAustron Project at CERN, Status Report, May 2013

CERN Document Server

Benedikt, M; Gutleber, J

2013-01-01

MedAustron is a light ion-therapy and research centre based on a synchrotron accelerator complex under construction in Austria. It is the first large-scale accelerator facility in Austria. For the implementation of the required accelerator technologies, the county of Lower Austria and the company EBG MedAustron have set up dedicated agreements with CERN. These cover the assistance of CERN for the design and manufacturing follow-up of accelerator components and training of MedAustron personnel. CERN contributed to the MedAustron construction in particular by providing domain expertise, infrastructure, and manpower in relation with the design, the tendering and procurement processes.\

Young Artists@ CERN

CERN Multimedia

2004-01-01

In view of 50th anniversary of CERN, about 20 young artists will be visiting CERN from 26 to 31 January to learn about the laboratory's research and the mysterious world of particle physics. The impressions they take home will be the main inspiration for the artwork they will then produce for an exhibition to be inaugurated in October 2004 as part of CERN's 50th anniversary celebration. We are looking for scientists who are interested in the Art-Science synergy and who can volunteer to discuss their work at CERN to these young artists during this week (25-31/01). Please contact renilde.vanden.broeck@cern.ch if you are interested. The project is called Young Artists@ CERN and for more information look at this website: http://www.hep.ucl.ac.uk/~andy/CERNart/

CERN Cricket club

CERN Multimedia

CERN Cricket club

2015-01-01

The CERN Cricket Club 2015 season begins soon, the first net practice is scheduled (weather permitting) for Thursday April 16th, at 18:00! The club is always looking for new players and newcomers will be made very welcome. Anyone who is interested in joining the club should sign up on our web site: http://cern.ch/Club-Cricket/ or turn up for net practice, which takes place each Thursday evening from April 16th (apart from CERN official holidays) until the end of September (starting at 18:00 to around 19:30) at the CERN Prévessin site: http://club-cricket.web.cern.ch/Club-Cricket/CERN-Ground.html The first match will be at home on Sunday, April 19th against Rhone CC from Lyon.

CERN Table Tennis Club

CERN Multimedia

CERN Table Tennis Club

2014-01-01

CERN Table Tennis Club Announcing CERN 60th Anniversary Table Tennis Tournament to take place at CERN, from July 1 to July 15, 2014   The CERN Table Tennis Club, reborn in 2008, is encouraging people at CERN to take more regular exercise. This is why the Club, thanks to the strong support of the CERN Staff Association, installed last season a first outdoor table on the terrace of restaurant # 1, and will install another one this season on the terrace of Restaurant # 2. Table tennis provides both physical exercise and friendly social interactions. The CERN Table Tennis club is happy to use the unique opportunity of the 60th CERN anniversary to promote table tennis at CERN, as it is a game that everybody can easily play, regardless of level. Table tennis is particularly well suited for CERN, as many great physicists play table tennis, as you might already know: “Heisenberg could not even bear to lose a game of table tennis”; “Otto Frisch played a lot of table tennis;...

CERN Medtech:Hackathon

CERN Multimedia

Olofsson, Simon

2018-01-01

The CERN Medtech:Hackathon, organised by CERN Knowledge Transfer, was held in IdeaSquare during 6-9 April. Teams from all around the world gathered, by using CERN technology, to solve problems posed by the Medtech industry.

1992 CERN school of computing

International Nuclear Information System (INIS)

Verkerk, C.

1993-01-01

These Proceedings contain written accounts of most of the lectures given at the 1992 CERN School of Computing, covering a variety of topics. A number of aspects of parallel and of distributed computing were treated in five lecture series: 'Status of parallel computing', 'An introduction to the APE100 computer', 'Introduction to distributed systems', 'Interprocess communication' and 'SHIFT, heterogeneous workstation services at CERN'. Triggering and data acquisition for future colliders was covered in: 'Neural networks for tripper' and 'Architecture for future data acquisition systems'. Analysis of experiments was treated in two series of lectures; 'Off-line software in HEP: Experience and trends', and 'Is there a future for event display?'. Design techniques were the subject of lectures on: 'Computer-aided design of electronics', CADD, computer-aided detector design' and 'Software design, the methods and the tools'. The other lectures reproduced here treated various fields: 'Second generation expert systems', 'Multidatabase in health care systems', 'Multimedia networks, what is new?' 'Pandora: An experimental distributed multimedia system', 'Benchmarking computers for HEP', 'Experience with some early computers' and 'Turing and ACE; lessons from a 1946 computer design'. (orig.)

Germany at CERN

CERN Multimedia

2005-01-01

From left to right: Maximilian Metzger, CERN's Secretary-General, Hermann Schunck, Director at the German Federal Ministry of Education and Research, and Robert Aymar, CERN's Director-General, talking to Wolfgang Holler from Butting, one of the companies at the "Germany at CERN" exhibition. Far right : Susanne-Corinna Langer-Greipl from BMBF, delegate to the CERN Finance Committee. For three days, CERN's Main Building was transformed into a showcase for German industry. Twenty-nine companies from sectors related to particle physics (electrical engineering, vacuum and low temperature technology, radiation protection, etc.) were here for the ninth "Germany at CERN" exhibition, organised by the German Federal Ministry of Education and Research (BMBF), which gave them the opportunity to meet scientists and administrators from the Laboratory. On 1 March the exhibition was visited by a German delegation headed by Dr Hermann Schunck, Director at BMBF.

France at CERN

CERN Multimedia

CERN Bulletin

2010-01-01

Rolf Heuer, CERN Director General, visits the exhibition "La France au CERN". The exhibition France at CERN, organized by UBIFRANCE in collaboration with CERN's GS/SEM (Site Engineering and Management) service, took place from Monday 7 to Wednesday 9 June in the Main Building. The 36 French firms taking part came to present their products and technologies related to the Organization's activities. The next exhibition will be "Netherlands at CERN" in November.

CERN Shop Christmas Sale

CERN Multimedia

Visits & Exhibition Service/ETT-VE

2001-01-01

11-13.12.2001 Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 11 to Thursday 13 December from 10.30 to 16.00. CERN Calendar 10.- CERN Sweat-shirts(M, L, XL) 30.- CERN T-shirt (M, L, XL) 20.- New CERN silk tie (2 colours) 35.- Fancy silk tie (blue, bordeau) 25.- Silk scarf (light blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- CERN watch 25.- CERN baseball cap 15.- CERN briefcase 15.- Book 'Antimatter' (English) 35.- Book 'How the web was born' (English) 25.- The Search for Infinity (French, Italian, English, German) 40.-   If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs.

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE CERN EDMS Introduction (Français) 12.03 1 jour Sharepoint Collaboration Worskpace\t(Français) 17-18.03 2 jours CERN EDMS for Engineers (English) 20.03\t1 day CERN EDMS for Local Administrators (English) 27-28.03 1 day Word 2007: Short course I: HowTo. work with AutoTasks (Bilingual) 31.03 0.5 day/jour Word 2007: Short course II: HowTo mail merge (Bilingual)\t31.03\t0.5 day/jour Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t1 jour In Design: Introduction (Français)\t07-08.04\t2 jours Windows VISTA (Français)\t...

CERN Photo Club (CPC) / Canon Contest - My View of CERN

CERN Multimedia

Steyaert, Didier

2016-01-01

The CERN Photo Club has organized in collaboration with Canon Switzerland a photo contest open to all members of the CERN (Persons with a CERN access card). The only restriction is that the photos must have been taken with a CANON camera (DSLR, bridge or compact) between 1 and 31 October 2016.

Control Optimization of a LHC 18 KW Cryoplant Warm Compression Station Using Dynamic Simulations

CERN Document Server

Bradu, B; Niculescu, S I

2010-01-01

This paper addresses the control optimization of a 4.5 K refrigerator used in the cryogenic system of the Large Hadron Collider (LHC) at CERN. First, the compressor station with the cold-box have been modeled and simulated under PROCOS (Process and Control Simulator), a simulation environment developed at CERN. Next, an appropriate parameter identification has been performed on the simulator to obtain a simplified model of the system in order to design an Internal Model Control (IMC) enhancing the regulation of the high pressure. Finally, a floating high pressure control is proposed using a cascade control to reduce operational costs.

What's new@CERN, episode 2

CERN Multimedia

CERN Video productions

2011-01-01

On Monday 7 November at 4pm in English and 4.20pm in French, watch "What's new@CERN" on webcast.cern.ch. In this second episode: LHC performance, a journey to the particle source and this past month's news.   var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-0753-kbps-640x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-Multirate-200-to-753-kbps-640x360-25-fps.wmv', 'false', 480, 360, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-posterframe-640x360-at-30-percent.jpg', '1394250', true, 'Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4');

Making CERN a modern and attractive employer

CERN Multimedia

2016-01-01

On 1 September 2016, the new career structure that emerged from the latest five-yearly review of employment terms and conditions came into effect.   All CERN staff received a letter in August explaining what the new structure means for them personally, while an HR road show has presented the new structure around the departments. The five-yearly review focused on CERN staff, but it also concerns Fellows and Associates. Its aims are to contribute to the long-term sustainability of CERN by ensuring that we are competitive in the job market, and that we are attentive to the needs of our personnel. Surveys conducted by both the HR Department and the Staff Association told us that people care about things like diversity, flexibility, social conditions and transparency. As a result, new procedures simplify the annual performance appraisal, clarify the promotion process and introduce more flexible conditions for parental leave and teleworking. These things are all designed to make CERN a modern and attra...

CERN Technical Training 2005: "Introduction to ANSYS"

CERN Multimedia

Davide Vitè

2005-01-01

Course Session (28.6 - 1.7.2005) The following course session is scheduled in the framework of the CERN Technical Training Programme 2005, and in collaboration with CAD-FEM AG (CH): Introduction to ANSYS (course in English): 28.6 - 1.7.2005 (4 days, 6 places available, estimated cost: approx. 1'200.- CHF per person). The price quoted above may vary, depending on the number of confirmed participants. If you are interested in attending the above course session, please discuss with your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at http://www.cern.ch/TechnicalTraining/ under "Places Available", with the detailed course programmes. Due to the short notice, please send at the same time an e-mail to Technical.Training@cern.ch, announcing your registration. The complete training offer of ANSYS courses at CERN can be found at the same website, in the Mechanical Design curriculum, Finite Element Methods section. Organiser: Davide Vit&egr...

Record Recommendations for the CERN Document Server

CERN Document Server

AUTHOR|(CDS)2096025; Marian, Ludmila

CERN Document Server (CDS) is the institutional repository of the European Organization for Nuclear Research (CERN). It hosts all the research material produced at CERN, as well as multi- media and administrative documents. It currently has more than 1.5 million records grouped in more than 1000 collections. It’s underlying platform is Invenio, an open source digital library system created at CERN. As the size of CDS increases, discovering useful and interesting records becomes more challenging. Therefore, the goal of this work is to create a system that supports the user in the discovery of related interesting records. To achieve this, a set of recommended records are displayed on the record page. These recommended records are based on the analyzed behavior (page views and downloads) of other users. This work will describe the methods and algorithms used for creating, implementing, and the integration with the underlying software platform, Invenio. A very important decision factor when designing a recomme...

CERN SUMMER SCHOOL 2015 PROJECT REPORT

CERN Document Server

Jin, Zizhuo Tony

2015-01-01

The context of this internship is the CERN summer student program for the year 2015. As a member of the CERN summer school, I have been assigned, in addition to the classes I attended in the morning, a scientific project within the BE-ABP-HSC section. This work was done under the directions of Benoit Salvant and Nicolo Biancacci whom I thank greatly for their help, patience and teaching. The project consisted in observing the effects generated by the beam passing through various devices. We focused mainly on the electromagnetic waves generated by beams of particles travelling along two of the accelerator's devices: A wire scanner and the TDI (LHC injection beam stopper). These Simulations are of importance to estimate the effect of the beam onto the surrounding apparatus and ensuring both that the latter doesn't get damaged and that the beam doesn't lose too much energy. All the models and simulations were done using c CST STUDIO SUITE software developed by the c CST company.

The CERN Library

CERN Multimedia

Hester, Alec G

1968-01-01

Any advanced research centre needs a good Library. It can be regarded as a piece of equipment as vital as any machine. At the present time, the CERN Library is undergoing a number of modifications to adjust it to the changing scale of CERN's activities and to the ever increasing flood of information. This article, by A.G. Hester, former Editor of CERN COURIER who now works in the Scientific Information Service, describes the purposes, methods and future of the CERN Library.

CERN Radiation Protection (RP) calibration facilities

CERN Document Server

AUTHOR|(CDS)2082069; Macián-Juan, Rafael

Radiation protection calibration facilities are essential to ensure the correct operation of radiation protection instrumentation. Calibrations are performed in specific radiation fields according to the type of instrument to be calibrated: neutrons, photons, X-rays, beta and alpha particles. Some of the instruments are also tested in mixed radiation fields as often encountered close to high-energy particle accelerators. Moreover, calibration facilities are of great importance to evaluate the performance of prototype detectors; testing and measuring the response of a prototype detector to well-known and -characterized radiation fields contributes to improving and optimizing its design and capabilities. The CERN Radiation Protection group is in charge of performing the regular calibrations of all CERN radiation protection devices; these include operational and passive dosimeters, neutron and photon survey-meters, and fixed radiation detectors to monitor the ambient dose equivalent, H*(10), inside CERN accelera...

From the CERN web: knowledge transfer, sustainability, CERN openlab and more

CERN Multimedia

2015-01-01

This section highlights articles, blog posts and press releases published in the CERN web environment over the past weeks. This way, you won’t miss a thing...   Previous successful Knowledge Transfer enterprises have helped to develop several useful technologies, such as these photonic crystals, which glow when high-energy charged particles pass through, and are used for medical imaging. New Knowledge Transfer website to grow CERN’s industry links 23 November – by Harriet Jarlett  CERN’s Knowledge Transfer Group has just launched a new tool to encourage CERN researchers and businesses to share their technologies, ideas and expertise. It’s hoped that by facilitating these exchanges the tool will inspire new ways to apply CERN technologies commercially, to help benefit industry and society. Continue to read…    The power station at CERN's Prévessin site. (Image: Margot Frenot/CERN). CERN an...

Electron-cloud simulation studies for the CERN-PS in the framework of the LHC Injectors Upgrade project

CERN Document Server

Rioja Fuentelsaz, Sergio

The present study aims to provide a consistent picture of the electron cloud effect in the CERN Proton Synchrotron (PS) and to investigate possible future limitations due to the requirements foreseen by the LHC Injectors Upgrade (LIU) project. It consists of a complete simulation survey of the electron cloud build-up in the different beam pipe sections of the ring depending on several controllable beam parameters and vacuum chamber surface properties, covering present and future operation parameters. As the combined function magnets of the accelerator constitute almost the $80\\%$ in length of the ring, the implementation of a new feature for the simulation of any external magnetic field on the PyECLOUD code, made it possible to perform this study. All the results of the simulations are given as a function of the vacuum chamber surface properties in order to deduce them, both locally and globally, when compared with experimental data. In a first step, we characterize locally the maximum possible number of ...

CERN & Society – Spreading our spirit of scientific curiosity

CERN Multimedia

2016-01-01

With the third group of winners of the CERN Beamline for Schools (BL4S) competition on their way home after successfully conducting their experiments at CERN, now is a good time to take a look at the CERN & Society programme.   Established in 2014, the CERN & Society Foundation raises funds for a range of projects designed to maximise CERN’s impact by deploying our facilities and expertise beyond our core mission. BL4S is among the most successful projects in the CERN & Society portfolio. Now entering its fourth annual cycle, BL4S has allowed hundreds of schools around the world to experience particle physics research first hand by preparing their proposals for experiments, frequently with guidance from members of the International Particle Physics Outreach Group, IPPOG, and other physicists around the world. Each year, two lucky winning teams come to CERN to carry out their experiments: a fabulous prize by any standard. BL4S, however, is far from the only project in the CER...

France at CERN

CERN Multimedia

GS Department

2010-01-01

Industrial Exhibition Administration Building Bldg 61 Tuesday 8 June: 9 a.m. – 5.30 p.m. Wednesday 9 June: 9 a.m. – 4 p.m. “FRANCE AT CERN” – INDUSTRIAL EXHIBITION Thirty-six French companies are presenting their latest technological advances during the industrial exhibition "France at CERN", featuring products and technologies specifically related to the activities of the CERN facility. Presenting their know-how in electric vehicles, PSA - PEUGEOT/CITROEN are sponsoring the event. Seminars will be hold in the Main Building’s conference rooms: R&D innovation strategy in Pôle Nucléaire Bourgogne (08/06/2010 – 13h) MU by Peugeot (08/06/2010 – 14h) Citroën (08/06/2010 – 15h) « Elément 14 » : a unique design engineer community for sharing Electronic Engineering Solutions (09/06/2010 – 11h) Individual B2B meetin...

CERN-BINP Workshop for Young Scientists in $e^{+}e^{-}$ Colliders

CERN Document Server

Linssen, Lucie; eCOL 2016

2017-01-01

The "CERN-BINP workshop for young scientists in e+e- colliders" is organised in the framework of the EU-funded CREMLIN project. The CREMLIN project aims at strengthening science cooperation between six Russian megascience facilities and related research infrastructure counterparts in Europe. BINP and CERN coordinate a dedicated CREMLIN work package focusing on a future super-charm-tau factory (SCT) at BINP. SCT aims at producing e+e- collisions with up to 5 GeV centre-of-mass energy and at very high luminosity. In parallel CERN is hosting design studies for two possible high-energy e+e- colliders: FCC-ee and CLIC. In matters of physics, design and technologies the BINP and CERN studies address technological and scientific questions of common interest. Similar issues are dealt with in the framework of other flavour factories and energy frontier e+e- colliders worldwide. The 3-day workshop provides young scientists (at the student and postdoc level) opportunities to present their work and exchange experiences. ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You can find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE WORD 2007 - level 1 : ECDL\t(English)\t05-06.02\t2 days ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours CERN EDMS – Introduction\t(English)\t10.02\t1 day CERN EDMS – Introduction\t(Français)\t11.02\t1 jour Sharepoint Designer (Frontpage)- Level 1\t(Français)\t12-13.02\t2 jours Windows Vista\t(Français)\t24.02\t3 heures ½ EXCEL 2007 – Level 2: ECDL\t(Français)\t26-27.02\t2 jours Indico – Meeting Organisation\t(Français)\t02.03\t2 heures Indico – Conference Organisation\t(English)\t02.03\t3 hours Excel 2007 – Level 1: ECDL\t(Français)\t03-04.03\t2 jours CERN EDMS for Local Administrators\t(English)\t04-05.03\t2 days Novelties Office 2007: Word 2007\t(Français)\t09.03\t1 jour Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 d...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You can find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours CERN EDMS – Introduction\t(English)\t10.02\t1 day CERN EDMS – Introduction\t(Français)\t11.02\t1 jour Sharepoint Designer (Frontpage)- Level 1\t(Français)\t12-13.02\t2 jours Windows Vista\t(Français)\t24.02\t3 heures ½ EXCEL 2007 – Level 2: ECDL\t(Français)\t26-27.02\t2 jours Indico – Meeting Organisation\t(Français)\t02.03\t2 heures Indico – Conference Organisation\t(English)\t02.03\t3 hours Excel 2007 – Level 1: ECDL\t(Français)\t03-04.03\t2 jours CERN EDMS for Local Administrators\t(English)\t04-05.03\t2 days Novelties Office 2007: Word 2007\t(Français)\t09.03\t1 jour Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 days Access 2007 – Level 2: ECDL\t(Français)\t30-31.0...

CERN, Geneva

CERN Multimedia

2007-01-01

"The Large Hadron Collider (pages 1-3) is being built at CERN, the European Centre for Nuclear Research near Geneva. CERN offers some extremely exciting opportunities to see "big bang" in action. (1 page)

CERN Technical Training 2006: 'Comprehensive VHDL for FPGA Design' and 'Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE' course sessions, May-June 2006

CERN Multimedia

2006-01-01

Learning for the LHC! The next session of the course 'Comprehensive VHDL for FPGA Design' given in English by Doulos Ltd (UK) will take place at CERN from May 29 through June 2nd (5 days), for a maximum of 14 participants. It will be preceded by an optional, refresher session of the two-day course 'Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE', given on 23-24 May, in French, by Serge Brobecker of IT/DES. For more information, please visit the Technical Training CTA website, http://cta.cern.ch/cta2/f?p=300, to consult the detailed course descriptions and to apply via EDH. Organiser: Davide Vitè / HR-PMD / 75141 Davide.Vite@cern.ch ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING technical.training@cern.ch

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 Novelties (English) – 03.03 - 1 day Sharepoint designer / Frontpage, Niveau 2 – (Français) - 06-07.03 - 2 jours CERN EDMS Introduction (Français) - 12.03 - 1 jour Sharepoint Collaboration Worskpace (Français) - 17-18.03 - 2 jours CERN EDMS for Engineers (English) - 20.03 - 1 day CERN EDMS for Local Administrators (English) - 27.03 - 1 day Word 2007: Short course I: HowTo. work with AutoTasks (Bilingue/Bilingual) - 31.03 – 0.5 day/jour Word 2007: Short course II: HowTo mail merge (Bilingue/Bilingual) - 31.03 – 0.5 day/jour Excel 2007: Short course III: How to pivot tables (Bilingue/Bilingual) - 01.04 - 0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingue/Bilingual) - 01.04 -...

CERN launches high-school internship programme

Science.gov (United States)

Johnston, Hamish

2017-07-01

The CERN particle-physics lab has hosted 22 high-school students from Hungary in a pilot programme designed to show teenagers how science, technology, engineering and mathematics is used at the particle-physics lab.

The CERN's year; L'annee du CERN

Energy Technology Data Exchange (ETDEWEB)

Chadli, M. [Universite de Picardie Jules Verne, CREA, 80 - Amiens (France); Coppier, H. [Ecole Superieure d' Ingenieurs en Electrotechnique et Electronique d' Amiens - ESIEE Amiens, 80 - Amiens (France); Pezzeti, M. [Conseil Europeen pour la Recherche Nucleaire (CERN), Geneve (Switzerland)

2007-12-15

CERN, the European organization for nuclear research, has just celebrated its fifty years of existence. Its first goal was to counterbalance the migration of physics scientists towards the USA by the creation of a physics laboratory gathering scientists from the different European countries. Today, the CERN's mission has changed and has overcome all the expectations of its founders. In 2008, it will become, with the LHC (Large Hadron Collider), the biggest particle accelerator in the world. The CERN employs about 3000 physicists, engineers, technicians and workers. There is also 6500 people from 80 different countries who use the CERN's facilities during the year. The CERN is controlled by 20 European member states and 6 observer countries, and 20 non-member countries participate to the programs in progress. The CERN's power comes from its international and cosmopolitan spirit. The whole most famous physicists of the world can work together for the progress of science and for a better understanding of matter, of its interactions and of our universe. Two Nobel prices of physics come from the CERN: C. Rubbia and S. Van der Meer in 1983 for the discovery of W{sup +}, W{sup -} and Z{sub 0} bosons, and G. Charpak for the development of particle detectors. One can foresee that the LHC will allow new scientific achievements, like for instance, during experiments for the quest of the famous Higgs boson. It is important also to mention that the CERN has been at the origin of several technological innovations in all technical and engineering domains in the framework of its fundamental physics researches. (J.S.)

Where students turn into teachers: the eighth Inverted CERN School of Computing

CERN Multimedia

2015-01-01

For the eighth time since 2005, the CERN School of Computing (CSC) has organised its inverted school, which will take place at CERN on 23 and 24 February 2015, in the IT Auditorium (Room 31/3-004).   The idea for inverted CSCs stemmed from the observation that at regular CSCs it is common to find students in the room who know more on a particular (advanced) topic than the lecturer. So why not try and exploit this and turn the students into teachers? CSC2014 students made proposals via an electronic discussion forum, from which a programme was designed. This year’s programme focuses on challenging and innovative topics, including: the evolution of processor architectures, the growing complexity of CPUs and its impact on the software landscape, exploring clustering and data processing, the importance of message passing in high-performance computing, the development of applications across heterogeneous systems. There will be also lectures on applied computing used in the simulation of lon...

From the CERN web: Collide@CERN, Fermilab neutrinos and more

CERN Multimedia

2015-01-01

This new section highlights articles, blog posts and press releases published in the CERN web environment over the past weeks. This way, you won’t miss a thing...   Ruth Jarman and Joe Gerhardt. (Photo: Matthias H. Risse). Collide@CERN Ars Electronica Award goes to “Semiconductor” 10 August – Collide@CERN Ruth Jarman and Joe Gerhardt, two English artists collaborating under the name Semiconductor, are this year’s recipients of the Collide@CERN Ars Electronica Award. In the coming months, they will begin a two-month residency at CERN.  Continue to read…     Illustration: Fermilab/Sandbox Studio.   Fermilab experiment sees neutrinos change over 500 miles 7 August - Fermilab press release Scientists on the NOvA experiment saw their first evidence of oscillating neutrinos, confirming that the extraordinary detector built for the project not only functions as planned but is also making great p...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Office 2007 Novelties\t(English)\t03.03\t1 day Sharepoint designer / Frontpage, Niveau 2\t(Français) 06-07.03 2 jours CERN EDMS Introduction (Français) 12.03 1 jour Sharepoint Collaboration Worskpace\t(Français) 17-18.03 2 jours CERN EDMS for Engineers (English) 20.03\t1 day CERN EDMS for Local Administrators (English) 27-28.03 1 day Word 2007: Short course I: HowTo. work with AutoTasks (Bilingual) 31.03 0.5 day/jour Word 2007: Short course II: HowTo mail merge (Bilingual)\t31.03\t0.5 day/jour Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t1 jour...

CERN Accelerator School

International Nuclear Information System (INIS)

Anon.

1994-01-01

The CERN Accelerator School (CAS) recently held its Advanced Accelerator Physics course in Greece on the island of Rhodes. Complementing the general course in Finland last year, this course was organized together with the University of Athens and NCSR. Demokritos. Accelerator specialists from Europe, CIS, Japan and USA followed two weeks of ''state-of-theart'' lectures designed to complete their education in the field

Design of Injection and Extraction Systems with Optimisation of Lattice and Layout for the CERN PS2 Synchrotron

CERN Document Server

Bartmann, W

2009-01-01

The CERN Proton Synchrotron PS2 is one of the foreseen accelerators for the LHC injector upgrade. This upgrade aims first at increasing the instantaneous luminosity of LHC and second at providing a reliable beam for the CERN accelerator complex. From this aspect, the main characteristics of the PS2 are high reliability for high intensity beams. The goal of this thesis was the design of the machine’s lattice and injection/extraction systems meeting the constraints coming mainly from the LHC beam type but also from beam requirements of experiments at PS2 and the SPS. In the design, the given energy range together with filling schemes for different beam types and RF cogging were first used to define the circumference of the machine. Estimates on the space requirements of injection/extraction systems were made in order to divide the total machine length between arc and long straight section. Existing tunnels for transfer lines together with the minimisation of the total transfer line length favoured a race trac...

CERN Relay Race

CERN Multimedia

Running Club

2010-01-01

This year’s CERN Relay Race will take place around the Meyrin site on Thursday 20th May at 12h00. This annual event is for teams of 6 runners covering distances of 1000m, 800m, 800m, 500m, 500m and 300m respectively. Teams may be entered in the Seniors, Veterans, Ladies, Mixed or Open categories. The registration fee is 10 CHF per runner, and each runner receives a souvenir prize. As usual, there will be a programme of entertainments from 12h in the arrival area, in front of the Restaurant no. 1. Drinks, food, CERN club information and music will be available for the pleasure of both runners and spectators. The race starts at 12h15, with results and prize giving at 13:15.   For details of the race, and of how to sign up a team, please visit: https://espace.cern.ch/Running-Club/CERN-Relay The event is organised by the CERN Running Club with the support of the CERN Staff Association.  

Sharing resources@CERN

CERN Multimedia

2002-01-01

The library is launching a 'sharing resources@CERN' campaign, aiming to increase the library's utility by including the thousands of books bought by individual groups at CERN. This will improve sharing of information among CERN staff and users. Until now many people were unaware that copies of the same book (or standard, or journal) are often held not only by the library but by different divisions. (Here Eduardo Aldaz, from the PS division, and Isabel Bejar, from the ST division, read their divisional copies of the same book.) The idea behind the library's new sharing resources@CERN' initiative is not at all to collect the books in individual collections at the CERN library, but simply to register them in the Library database. Those not belonging to the library will in principle be unavailable for loan, but should be able to be consulted by anybody at CERN who is interested. "When you need a book urgently and it is not available in the library,' said PS Division engineer Eduardo Aldaz Carroll, it is a sham...

CERN Pensioners Association

CERN Multimedia

The GAC Committee

2004-01-01

Open Day To all CERN retired staff As part of the celebrations organised for the 50th anniversary of CERN, an Open Day will be held on Saturday 16 October 2004. Anyone willing to act as a guide, either to help and inform visitors at the reception points or to guide groups of visitors, sharing your knowledge with them, is invited to fill in the attached form. A preparatory meeting will be arranged for those who left CERN some time ago and whose knowledge of the site may no longer be quite up-to-date. The Open Day organisers need your help, which will be very much appreciated. We hope that many pensioners will participate. People with internet access may enrol directly without coming to CERN, http://www.cern.ch/CERN50/openday The GAC Committee OPEN DAY : CALL FOR VOLUNTEERS 16th October 2004 So now you are excited about the Open Day, how can you participate? As you can imagine, for such a large number of activities, we need many volunteers. Please return the following form to Elena Battis...

CERN Holiday Gift Guide

CERN Multimedia

2013-01-01

Do you have last-minute gifts to get? Stuck for ideas? The CERN Shop and the ATLAS and CMS secretariats have some wonderfully unique gifts and stocking-fillers for sale this year - perfect for the physics fanatics in your life. Let's take a look...   1. CERN Notebook, 10 CHF - 2. CERN Pop-up book, 30 CHF - 3. USB Stick 8GB, 25 CHF - 4. CERN Tumbler, 12 CHF 5. ATLAS 3D Viewer, 5 CHF - 6. ATLAS Puzzle, 15 CHF - 7. CMS Umbrella, 25 CHF   These gifts are all available at the CERN Shop, with the exception of the ATLAS 3D Viewer and the CMS umbrella, which are only available from the respective secretariats. Don’t forget! If you’re from CERN, you still have time to take advantage of a 10% off discount at the CERN shop. Offer ends 20 December.

CERN Linac4 - The Space Charge Challenge Design and Commission

CERN Document Server

Hein, Lutz Matthias; Holzer, Bernhard

In the first phase of the upgrade program of the CERN accelerator complex the proton injector Linac2 will be replaced by a new, normal-conducting $H^-$ ion Linac, Linac4, allowing a significant increase of the proton flux intensity along the downstream accelerator complex. In the design of Linac4 three beam transport sections are implemented to match the beam between the different accelerator elements and to model the longitudinal pulse structure. These three beam transport sections, which are the most critical locations in terms of beam quality preservation, are in the focus of this thesis. During the work of this thesis the low energy beam transport (LEBT), which is required to match the source beam to the radiofrequency quadrupole (RFQ), has been commissioned and its beam dynamics re-constructed. The measurement campaign used to re-construct the LEBT beam dynamics was performed with the aim to prepare the RFQ commissioning and to maximise the LEBT performance. Downstream of the Linac4 accelerator the beam...

The CERN's year

International Nuclear Information System (INIS)

Chadli, M.; Coppier, H.; Pezzeti, M.

2007-01-01

CERN, the European organization for nuclear research, has just celebrated its fifty years of existence. Its first goal was to counterbalance the migration of physics scientists towards the USA by the creation of a physics laboratory gathering scientists from the different European countries. Today, the CERN's mission has changed and has overcome all the expectations of its founders. In 2008, it will become, with the LHC (Large Hadron Collider), the biggest particle accelerator in the world. The CERN employs about 3000 physicists, engineers, technicians and workers. There is also 6500 people from 80 different countries who use the CERN's facilities during the year. The CERN is controlled by 20 European member states and 6 observer countries, and 20 non-member countries participate to the programs in progress. The CERN's power comes from its international and cosmopolitan spirit. The whole most famous physicists of the world can work together for the progress of science and for a better understanding of matter, of its interactions and of our universe. Two Nobel prices of physics come from the CERN: C. Rubbia and S. Van der Meer in 1983 for the discovery of W + , W - and Z 0 bosons, and G. Charpak for the development of particle detectors. One can foresee that the LHC will allow new scientific achievements, like for instance, during experiments for the quest of the famous Higgs boson. It is important also to mention that the CERN has been at the origin of several technological innovations in all technical and engineering domains in the framework of its fundamental physics researches. (J.S.)

The LHC road at CERN

International Nuclear Information System (INIS)

Anon.

1989-01-01

To explore the 1 TeV energy scale where fundamental particle interactions should encounter new conditions, two major routes were proposed - a high magnetic field proton collider in the LEP tunnel, dubbed LHC for Large Hadron Collider, and the CERN Linear Collider (CLIC) to supply beams of electrons and positrons. Exploratory studies have shown that while CLIC remains a valid long-term goal, LHC appears as the most cost-effective way for CERN to enter the 1 TeV arena. High-field superconducting magnet prototype work demonstrates that a 'two-in-one' design supplying the 10 tesla fields needed to handle LHC's 8 TeV proton beams (collision energy 16 TeV) is a practical proposition. (orig./HSI).

1990 CERN School of Computing

International Nuclear Information System (INIS)

1991-01-01

These Proceedings contain written versions of lectures delivered at the 1990 CERN School of Computing, covering a variety of topics. Computer networks are treated in three papers: standards in computer networking; evolution of local and metropolitan area networks; asynchronous transfer mode, the solution for broadband ISDN. Data acquisition and analysis are the topic of papers on: data acquisition using MODEL software; graphical event analysis. Two papers in the field of signal processing treat digital image processing and the use of digital signal processors in HEP. Another paper reviews the present state of digital optical computing. Operating systems and programming discipline are covered in two papers: UNIX, evolution towards distributed systems; new developments in program verification. Three papers treat miscellaneous topics: computer security within the CERN environment; numerical simulation in fluid mechanics; fractals. An introduction to transputers and Occam gives an account of the tutorial lectures given at the School. (orig.)

Commissioning the CERN IT Agile Infrastructure with experiment workloads

CERN Document Server

Medrano Llamas, Ramón; Kucharczyk, Katarzyna; Denis, Marek Kamil; Cinquilli, Mattia

2014-01-01

In order to ease the management of their infrastructure, most of the WLCG sites are adopting cloud based strategies. In the case of CERN, the Tier 0 of the WLCG, is completely restructuring the resource and configuration management of their computing center under the codename Agile Infrastructure. Its goal is to manage 15,000 Virtual Machines by means of an OpenStack middleware in order to unify all the resources in CERN's two datacenters: the one placed in Meyrin and the new on in Wigner, Hungary. During the commissioning of this infrastructure, CERN IT is offering an attractive amount of computing resources to the experiments (800 cores for ATLAS and CMS) through a private cloud interface. ATLAS and CMS have joined forces to exploit them by running stress tests and simulation workloads since November 2012. This work will describe the experience of the first deployments of the current experiment workloads on the CERN private cloud testbed. The paper is organized as follows: the first section will explain th...

CDD CERN Drawings Directory User's manual Version 1.1

CERN Document Server

Delamare, Christophe; Jeannin, F; Petit, S

1996-01-01

CDD (CERN Drawings Directory) is a multi-platform utility which manages engineering drawings made in any division at CERN. The aim of CDD is not to store the graphical drawing itself, but to store a reference with some information related to the drawing. Access to this data is provided via a graphical user interface which is based upon ORACLE Forms and via WWW. Drawings following different numbering systems and different management rules can be handled by CDD. The only condition is that those particular functionalities are well defined. Several drawing systems have been identified in CERN and therefore considered when designing the application. The current version of CDD focuses on systems EST, LEP, ST-IE, SPS, ST-CE and the experiments ALICE, ATLAS, CMS and LHCb. Other CERN systems could be easily integrated upon demand.

Integrity at CERN

CERN Document Server

Department, HR

2015-01-01

In the fulfillment of its mission, CERN relies upon the trust and material support of its Member States and partners, and is committed to exercising exemplary stewardship of the resources with which it is entrusted. Accordingly, CERN expects the highest level of integrity from all its contributors (whether members of the personnel, consultants, contractors working on site, or persons engaged in any other capacity at or on behalf of CERN). Integrity is a core value of CERN, defined in the Code of Conduct as “behaving ethically, with intellectual honesty and being accountable for one’s own actions”.

Preserving CERN's legacy

CERN Multimedia

Antonella Del Rosso

2015-01-01

At CERN, scientists from all over the world design and build innovative instruments to be implemented in the cutting-edge machines used in high-energy physics. Those instruments go on to become part of the world’s most powerful accelerators, Nobel-prize-winning detectors, unique antimatter machines, the first web servers… These are historical pieces and belong to our common heritage. But, what happens to them once they are no longer in use?   New endeavours consistently require new technical developments, and the list of “old” objects belonging to a laboratory like CERN increases over time. As innovative as they might have been when they were created, they are often bulky, sometimes very delicate, and do not always look like everyday tools when they are dismantled. How best to deal with them? “A database of objects suitable for scientific exhibitions has been available on CDS for many years,” says Gigi Rolandi, Chair of CER...

Simulating the Beam-line at CERN's ISOLDE Experiment

CERN Document Server

McGrath, Casey

2013-01-01

Maximizing the optical matching along portions of the ISOLDE beam-line and automating this procedure will make it easier for scientists to determine what the strengths of the electrical elds of each beam-line element should be in order to reduce particle loss. Simulations are run using a program called MAD-X, however, certain issues were discovered that hindered an immediate success of the simulations. Specifically, the transfer matrices for electrostatic components like the switchyards, kickers, and electric quadrupoles were missing from the original coding. The primary aim of this project was to design these components using AutoCAD and then extract the transfer matrices using SIMION. Future work will then implement these transfer matrices into the MAD-X code to make the simulations of the beam-line more accurate.

CernVM Online and Cloud Gateway: a uniform interface for CernVM contextualization and deployment

International Nuclear Information System (INIS)

Lestaris, G; Charalampidis, I; Berzano, D; Blomer, J; Buncic, P; Ganis, G; Meusel, R

2014-01-01

In a virtualized environment, contextualization is the process of configuring a VM instance for the needs of various deployment use cases. Contextualization in CernVM can be done by passing a handwritten context to the user data field of cloud APIs, when running CernVM on the cloud, or by using CernVM web interface when running the VM locally. CernVM Online is a publicly accessible web interface that unifies these two procedures. A user is able to define, store and share CernVM contexts using CernVM Online and then apply them either in a cloud by using CernVM Cloud Gateway or on a local VM with the single-step pairing mechanism. CernVM Cloud Gateway is a distributed system that provides a single interface to use multiple and different clouds (by location or type, private or public). Cloud gateway has been so far integrated with OpenNebula, CloudStack and EC2 tools interfaces. A user, with access to a number of clouds, can run CernVM cloud agents that will communicate with these clouds using their interfaces, and then use one single interface to deploy and scale CernVM clusters. CernVM clusters are defined in CernVM Online and consist of a set of CernVM instances that are contextualized and can communicate with each other.

Tunnel Linking the CERN Sites: Discontinuation of the (small) 'Attestation CERN'

CERN Multimedia

Service des Relations avec les Pays-hôtes

2004-01-01

With effect from 1st June 2004, members of the personnel whose contracts with the Organization are too short for them to hold legitimation documents issued by the Host States will be required to carry only the following documents to use the Tunnel linking the CERN sites: their national identity card, if accepted by the French and Swiss regulations, or their passport (with a visa/visas if required by the French and/or Swiss regulations) and their blue CERN card (access card). The (small) 'Attestation CERN' (CERN certificate) issued by the Users Office or the Human Resources Department will no longer be required. This amendment to paragraph 10 b) and to Annex 3 of the Rules for Use of the Tunnel (ref. CERN/DSU-DO/RH/8200) is related to the addition of an expiry date on blue CERN cards, which has been compulsory since 1st January 2003, and to the recording of all relevant information in the database used for the systematic checking of tunnel users by means of card readers installed at the tunnel. Relations...

CERN-IPMC solution for AdvancedTCA blades

CERN Document Server

Mendez, Julian Maxime; Haas, Stefan Ludwig; Joos, Markus; Mico, Sylvain; Vasey, Francois

2018-01-01

The AdvancedTCA standard has been selected as one of the hardware platforms for the upgrades of the back-end electronics of the CMS and ATLAS experiments of the Large Hadron Collider. In this context, the CERN EP-ESE group has designed and produced an IPMC mezzanine card for the management of AdvancedTCA blades. This paper presents the CERN-IPMC hardware and the software environment to be used for its customization and describes a test pad that can also be used as a development kit.

Study of longitudinal multibunch instabilities for LHC-type beams at the CERN Proton Synchrotron

CERN Document Server

Ventura, Letizia; Migliorati, Mauro; Palumbo, Luigi

This Master thesis work has been carried out at CERN in the framework of the LHC (Large Hadron Collider) Injector upgrade program (LIU). Longitudinal coupled-bunch (CB) oscillations are an important limitation for the high-brightness beam accelerated in the CERN Proton Synchrotron. Up to present intensities they are suppressed by a dedicated feedback system limited to the first two dominant oscillation modes. In view of the proposed installation of a new wide-band FB system in the framework of the LIU program, measurements have been performed on the old system with the aim of dimensioning the new one. A new simulation program, called LCBC ( Longitudinal Coupled Bunch Simulation), has been used to study the behaviour of the CB FB. By means of this code I have started an extensive simulation campaign to benchmark the code with the theory of coupled bunch and to confirm that the 10 MHz cavity system is the main cause of the coupled bunch instabilities in the CERN PS.

The 1956 CERN Symposium

CERN Document Server

Jarlskog, Cecilia

2014-01-01

CERN, currently the largest organization in the world for particle physics, was founded in 1954. Originally located in Meyrin, at the outskirts of the city of Geneva in Switzerland, it has with time extended into neighboring France. The Theoretical Study Division of CERN, however, was created already in 1952, i.e., before the official inauguration of CERN. It was situated in Copenhagen. Christian Møller [1] was appointed (part-time) as the Director and there were two full time senior staff members, Gunnar Källén and Ben R. Mottelson. While constructing buildings and accelerators were in progress, an international conference was organized by CERN in the city of Geneva. This “CERN Symposium on High Energy Accelerators and Pion Physics”, 11–23 June 1956, attracted about 250 participants from outside CERN, among them at least 18 Nobel Laureates or future Laureates. Unfortunately, the participants from CERN are not listed in the Proceedings [2]. The conference focused on measuring devices such as bubbl...

CERN: Digitally open, too

CERN Multimedia

Computer Security Team

2013-01-01

The Open Days are here!! From tomorrow onwards, we will be welcoming thousands of people to CERN. No barriers, no boundaries!   For decades, we have welcomed researchers and visitors from around the world to work at CERN, discuss physics research and attend our training sessions, lectures and conferences. This is how fundamental research should be conducted!!! But have you ever noticed how you are welcome at CERN in the digital world, too? Once you are affiliated and are registered with CERN, you receive a CERN computing account and e-mail address.  You can register your laptops, PCs and smartphones to use our (wireless) network, you can easily create your personal webpage, and profit from a vast disk space for file storage (AFS and DFS). CERN is indeed an Open Campus and not only during the Open Days. CERN is an Open Campus in the digital world. This digital Open Campus culture is exactly the reason why “computer security” has been dele...

CernVM - a virtual software appliance for LHC applications

International Nuclear Information System (INIS)

Buncic, P; Sanchez, C Aguado; Blomer, J; Franco, L; Mato, P; Harutyunian, A; Yao, Y

2010-01-01

CernVM is a Virtual Software Appliance capable of running physics applications from the LHC experiments at CERN. It aims to provide a complete and portable environment for developing and running LHC data analysis on any end-user computer (laptop, desktop) as well as on the Grid, independently of Operating System platforms (Linux, Windows, MacOS). The experiment application software and its specific dependencies are built independently from CernVM and delivered to the appliance just in time by means of a CernVM File System (CVMFS) specifically designed for efficient software distribution. The procedures for building, installing and validating software releases remains under the control and responsibility of each user community. We provide a mechanism to publish pre-built and configured experiment software releases to a central distribution point from where it finds its way to the running CernVM instances via the hierarchy of proxy servers or content delivery networks. In this paper, we present current state of CernVM project and compare performance of CVMFS to performance of traditional network file system like AFS and discuss possible scenarios that could further improve its performance and scalability.

Medical Applications at CERN and the ENLIGHT Network.

Science.gov (United States)

Dosanjh, Manjit; Cirilli, Manuela; Myers, Steve; Navin, Sparsh

2016-01-01

State-of-the-art techniques derived from particle accelerators, detectors, and physics computing are routinely used in clinical practice and medical research centers: from imaging technologies to dedicated accelerators for cancer therapy and nuclear medicine, simulations, and data analytics. Principles of particle physics themselves are the foundation of a cutting edge radiotherapy technique for cancer treatment: hadron therapy. This article is an overview of the involvement of CERN, the European Organization for Nuclear Research, in medical applications, with specific focus on hadron therapy. It also presents the history, achievements, and future scientific goals of the European Network for Light Ion Hadron Therapy, whose co-ordination office is at CERN.

Parallelism at Cern: real-time and off-line applications in the GP-MIMD2 project

International Nuclear Information System (INIS)

Calafiura, P.

1997-01-01

A wide range of general purpose high-energy physics applications, ranging from Monte Carlo simulation to data acquisition, from interactive data analysis to on-line filtering, have been ported, or developed, and run in parallel on IBM SP-2 and Meiko CS-2 CERN large multi-processor machines. The ESPRIT project GP-MIMD2 has been a catalyst for the interest in parallel computing at CERN. The project provided the 128 processor Meiko CS-2 system that is now succesfully integrated in the CERN computing environment. The CERN experiment NA48 was involved in the GP-MIMD2 project since the beginning. NA48 physicists run, as part of their day-to-day work, simulation and analysis programs parallelized using the message passing interface MPI. The CS-2 is also a vital component of the experiment data acquisition system and will be used to calibrate in real-time the 13000 channels liquid krypton calorimeter. (orig.)

Offering Global Collaboration Services beyond CERN and HEP

CERN Document Server

Fernandes, J; Baron, T

2015-01-01

The CERN IT department has built over the years a performant and integrated ecosystem of collaboration tools, from videoconference and webcast services to event management software. These services have been designed and evolved in very close collaboration with the various communities surrounding the laboratory and have been massively adopted by CERN users. To cope with this very heavy usage, global infrastructures have been deployed which take full advantage of CERN's international and global nature. If these services and tools are instrumental in enabling the worldwide collaboration which generates major HEP breakthroughs, they would certainly also benefit other sectors of science in which globalization has already taken place. Some of these services are driven by commercial software (Vidyo or Wowza for example), some others have been developed internally and have already been made available to the world as Open Source Software in line with CERN's spirit and mission. Indico for example is now installed in 10...

Domain Specific Language for Magnetic Measurements at CERN

CERN Document Server

Petrone, C

2009-01-01

CERN, the European Organization for Nuclear Research, is one of the world’s largest and most respected centres for scientific research. Founded in 1954, the CERN Laboratory sits astride the Franco–Swiss border near Geneva. It was one of Europe’s first joint ventures and now has 20 Member States. Its main purpose is fundamental research in partcle physics, namely investigating what the Universe is made of and how it works. At CERN, the design and realization of the new particle accelerator, the Large Hadron Collider (LHC), has required a remarkable technological effort in many areas of engineering. In particular, the tests of LHC superconducting magnets disclosed new horizons to magnetic measurements. At CERN, the objectively large R&D effort of the Technolgy Department/Magnets, Superconductors and Cryostats (TE/MSC) group identified areas where further work is required in order to assist the LHC commissioning and start-up, to provide continuity in the instrumentation for the LHC magnets maintenance,...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Windows Vista\t(Français)\t11.07\t½ journée SOFTWARE AND SYSTEM TECHNOLOGIES Advanced Python-Hands-on\t(English)\t07-09.07\t3 days MECHANICAL DESIGN ANSYS CFX\t(Français)\t28-31.07\t4 jours If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at: http://cta.cern.ch/cta2/f?p=110:9 under ‘Technical Training’ with the detailed course program. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. CERN Technical Training courses are open only to members of the CERN personnel (staff members and fellows; associates, stude...

MapCERN: the CERN map on your mobile

CERN Multimedia

Anaïs Schaeffer

2011-01-01

On the initiative of the GS Department, a new smartphone application called MapCERN has just been released. Available in two different versions – one from the Apple Store for iPhones and the other from the web for Android and Blackberry – it will help you to find the building you're looking for more easily.     The Globe of Science and Innovation as "seen" in the augmented reality of the iPhone.  You've got an appointment with someone at the other end of the CERN site and you're planning to use the CERN map to find your way there but you suddenly realise you've left it in your office… No need to panic! Simply take out your smartphone and let it guide you to the building you're looking for. This first official CERN application, which has been developed by the GS Department in collaboration with private industry, is available free of charge from the Apple Store in the case of iPhones an...

Experiments at CERN in 1981

International Nuclear Information System (INIS)

1981-08-01

This report contains the preliminary abstracts of the current experiments at the CERN SPS synchrotron, the anti p colliding beams, the CERN ISR, the CERN PS synchrotron, and the CERN synchrocyclotron. See hints under the relevant topics. (HSI)

CERN honours its guides

CERN Multimedia

2004-01-01

At the end of January, CERN's guides were rewarded for their devotion to the Laboratory. They have a passion for their work, know CERN inside-out and for 40 years have shown people of all ages and nationalities, from all walks of life, around the Laboratory. Who are they? Why, the CERN guides, of course. On 27 January, ten of CERN's 180 guides received special honours for their impressive number of guided tours in 2003. Presenting the awards in the Microcosm hall, CERN's Director-General Robert Aymar congratulated the winners on the key role they play with respect to the general public. "CERN would be nothing without you who show them its activities," he stressed. CERN's Director-General Robert Aymar congratulates Alberto Ribon for his tally of over 40 visits in the course of 2003.One of the prizes was the book «The Particle Odyssey». Here the book's co-author Christine Sutton dedicates it for Sijin Qian. Tzanko Spassoff (PH) and retired staff members Klaus Batzner and Antonio Francano wo...

The design and construction of a double-sided Silicon Microvertex Detector for the L3 experiment at CERN

International Nuclear Information System (INIS)

Adam, A.; Ambrosi, G.; Babucci, E.; Bertucci, B.; Biasini, M.; Bilei, G.M.; Caria, M.; Checcucci, B.; Easo, S.; Fiandrini, E.; Krastev, V.R.; Massetti, R.; Pauluzzi, M.; Santocchia, A.; Servoli, L.; Baschirotto, A.; Bosetti, M.; Pensotti, S.; Rancoita, P.G.; Rattaggi, M.; Terzi, G.; Battiston, R.; Bay, A.; Burger, W.J.; Extermann, P.; Perrin, E.; Susinno, G.F.; Bencze, G.Y.L.; Kornis, J.; Toth, J.; Bobbink, G.J.; Duinker, P.; Brooks, M.L.; Coan, T.E.; Kapustinsky, J.S.; Kinnison, W.W.; Lee, D.M.; Mills, G.B.; Thompson, T.C.; Busenitz, J.; DiBitonto, D.; Camps, C.; Commichau, V.; Hangartner, K.; Schmitz, P.; Chen, A.; Hou, S.; Lin, W.T.; Gougas, A.; Kim, D.; Paul, T.; Hauviller, C.; Herve, A.; Josa, I.; Landi, G.; Lebeau, M.; Lecomte, P.; Viertel, G.M.; Waldmeier, S.; Leiste, R.; Lejeune, E.; Weill, R.; Lohmann, W.; Nowak, H.; Sachwitz, M.; Schoeniech, B.; Tonisch, F.; Trowitzsch, G.; Vogt, H.; Passaleva, G.; Yeh, S.C.

1993-01-01

A Silicon Microvertex Detector (SMD) has been commissioned for the L3 experiment at the Large Electron-Positron colliding-beam accelerator (LEP) at the European Center for Nuclear Physics, (CERN). The SMD is a 72,672 channel, two layer barrel tracker that is comprised of 96 ac-coupled, double-sided silicon detectors. Details of the design and construction are presented

The design of the optical components and gas control systems of the CERN Omega Ring Imaging Cerenkov Detector

International Nuclear Information System (INIS)

Apsimon, R.J.; Cowell, J.; Flower, P.S.

1985-06-01

A large Ring Imaging Cerenkov Detector (RICH) has been commissioned for use at the CERN Omega Spectrometer. The general design of the device is discussed, and the dependence of the attainable spatial resolution and range of particle identification on its optical parameters is illustrated. The construction and performance of the major optical components and gas systems of the detector are also described. (author)

Inspired by CERN

CERN Multimedia

2004-01-01

Art students inspired by CERN will be returning to show their work 9 to 16 October in Building 500, outside the Auditorium. Seventeen art students from around Europe visited CERN last January for a week of introductions to particle physics and astrophysics, and discussions with CERN scientists about their projects. A CERN scientist "adopted"each artist so they could ask questions during and after the visit. Now the seeds planted during their visit have come to fruition in a show using many media and exploring varied concepts, such as how people experience the online world, the sheer scale of CERN's equipment, and the abstractness of the entities scientists are looking for. "The work is so varied, people are going to love some pieces and detest others," says Andrew Charalambous, the project coordinator from University College London who is also curating the exhibition. "It's contemporary modern art, and that's sometimes difficult to take in." For more information on this thought-provoking show, see: htt...

CERN Mobility Survey

CERN Multimedia

GS Department

2011-01-01

The Institute of Shipping and Transport of the University of the Aegean and the National Technical University of Athens are partners with CERN in a study of mobility patterns between and within the CERN sites and to that effect have realized a mobility survey dedicated to the CERN community.         The study aims to understand: How you presently get around the CERN sites; What problems you encounter regarding mobility; What your needs are; What improvements you’d like to see; What measures you would like to see implemented most. The replies we receive will enable us to define a general policy promoting the diversity of mobility at CERN and to establish and quantify the strategic actions to be implemented for both the short and medium term. The objectives of the transport mobility plans are to: Facilitate mobility within and between the CERN sites by identifying adequate solutions in response to individual ...

France at CERN

CERN Multimedia

2001-01-01

From 19 to 22 June, for the 8th edition of France at CERN, 31 French companies presented their latest technology to the Laboratory. Demonstrating the latest in French technology during France at CERN. The France at CERN exhibition was inaugurated by Mr. Bernard Frois, Director of the Department Energy, Transport, Environment and Natural Resources at the Technology Directorate of the Ministry of Research. 'France is happy to be a Member of CERN, which is a successful example of the construction of scientific Europe,' he declared during the inauguration, 'this exhibition is an excellent opportunity to put fundamental research and advanced technology in contact.' Mr. Philippe Petit, French Ambassador to Switzerland, and Mr. Alexandre Defay, technical adviser of the Minister of Research, were also present to represent France and its industry. Representing CERN at the 19 June opening of the exhibition was Claude Detraz, who said, 'I hope that this exhibition will make it possible to weave stronger links between ...

Sharing resources@CERN

CERN Multimedia

Maximilien Brice

2002-01-01

The library is launching a 'sharing resources@CERN' campaign, aiming to increase the library's utility by including the thousands of books bought by individual groups at CERN. This will improve sharing of information among CERN staff and users. Photo 01: L. to r. Eduardo Aldaz, from the PS division, Corrado Pettenati, Head Librarian, and Isabel Bejar, from the ST division, read their divisional copies of the same book.

Britain at CERN

CERN Multimedia

CERN Press Office. Geneva

1994-01-01

Thirty-two British hi-tech companies present their products at this new industrial exhibition at CERN which takes place from 22 to 25 November, 1994. The exhibition offers British companies the opportunity to display their products in fields that are of immediate importance to the scientists, engineers and technicians working at CERN, and also to scientists from non-Member States who take part in research projects at CERN.

A gift to "mark" the fiftieth anniversary of CERN!

CERN Multimedia

2004-01-01

On 1 March, envelopes bearing a photograph of CERN will be available from the Saint-Genis-Pouilly (France) post office. During the week they will then become available from the CERN Prévessin, Prévessin-Moëns, Ferney-Voltaire and Thoiry post offices. On the 1st of each month thereafter, an envelope bearing a new photograph will be released; each will illustrate a different event in the history of CERN. When the series is completed, in December 2004, the ten envelopes released will form an attractive collection. The envelopes, illustrated with historical photographs of CERN and the pictorial postmark, including the new CERN logo, were designed by the graphics fiftieth anniversary team. The first envelope will be available from the Saint-Genis-Pouilly post office on 1 March. The Conseil Général de l'Ain and the Communauté de Communes du Pays de Gex will cover the cost of printing these stamped envelopes. The St-Genis post office will also issue a pictorial postmark including the fiftieth anniversary log...

Fusion Revisits CERN

CERN Multimedia

2001-01-01

It's going to be a hot summer at CERN. At least in the Main Building, where from 13 July to 20 August an exhibition is being hosted on nuclear fusion, the energy of the Stars. Nuclear fusion is the engine driving the stars but also a potential source of energy for mankind. The exhibition shows the different nuclear fusion techniques and research carried out on the subject in Europe. Inaugurated at CERN in 1993, following collaboration between Lausanne's CRPP-EPFL and CERN, with input from Alessandro Pascolini of Italy's INFN, this exhibition has travelled round Europe before being revamped and returning to CERN. 'Fusion, Energy of the Stars', from 13 July onwards, Main Building

LHC@Home: a BOINC-based volunteer computing infrastructure for physics studies at CERN

Science.gov (United States)

Barranco, Javier; Cai, Yunhai; Cameron, David; Crouch, Matthew; Maria, Riccardo De; Field, Laurence; Giovannozzi, Massimo; Hermes, Pascal; Høimyr, Nils; Kaltchev, Dobrin; Karastathis, Nikos; Luzzi, Cinzia; Maclean, Ewen; McIntosh, Eric; Mereghetti, Alessio; Molson, James; Nosochkov, Yuri; Pieloni, Tatiana; Reid, Ivan D.; Rivkin, Lenny; Segal, Ben; Sjobak, Kyrre; Skands, Peter; Tambasco, Claudia; Veken, Frederik Van der; Zacharov, Igor

2017-12-01

The LHC@Home BOINC project has provided computing capacity for numerical simulations to researchers at CERN since 2004, and has since 2011 been expanded with a wider range of applications. The traditional CERN accelerator physics simulation code SixTrack enjoys continuing volunteers support, and thanks to virtualisation a number of applications from the LHC experiment collaborations and particle theory groups have joined the consolidated LHC@Home BOINC project. This paper addresses the challenges related to traditional and virtualized applications in the BOINC environment, and how volunteer computing has been integrated into the overall computing strategy of the laboratory through the consolidated LHC@Home service. Thanks to the computing power provided by volunteers joining LHC@Home, numerous accelerator beam physics studies have been carried out, yielding an improved understanding of charged particle dynamics in the CERN Large Hadron Collider (LHC) and its future upgrades. The main results are highlighted in this paper.

CERN Services Availability during the CERN Annual Closure 2011

CERN Multimedia

IT & GS Departments

2011-01-01

General Services: Most of the services provided by the GS Department that do not depend on continuous human presence will remain available during the CERN annual closure. Support levels are reduced during this period, in general the target reaction time for problems will be ½ day. Apart from the heating system, no interruptions are scheduled. In case of failure, the reaction time for restoration of services depends on the arrangements that have been made on a service by service level. Incidents will be documented at http://gssb.web.cern.ch/ For more detailed information please consult the service-portal (http://cern.ch/service-portal). Computing Services Most of the services provided by the IT Department - including WLCG production services - will remain available during the CERN annual closure. No interruptions are scheduled but in case of failure, the restoration of services cannot be guaranteed. Problems will be dealt with on a best effort basis only. However, please note: Experts shoul...

Return from space: from the International Space Station to CERN

CERN Multimedia

2012-01-01

On 16 May 2011, the space shuttle Endeavour took off for the last time from Cape Canaveral in Florida with six astronauts on board. Their mission (code-named STS-134) was to install the Alpha Magnetic Spectrometer (AMS), the dark matter and antimatter detector designed at CERN, on the International Space Station. Since then, AMS has been sending data to CERN from space.   On Wednesday 25 July do not miss a rare opportunity to meet the mission’s six astronauts at CERN: Mark E. Kelly, commander (NASA) Greg H. Johnson, pilot (NASA) and the mission’s specialists: Michael Fincke (NASA) Roberto Vittori (ESA and ASI) Andrew J. Feustel (NASA) Greg Chamitoff (NASA) 4:20 pm: the event will kick off with a photo and autograph session at the Globe of Science and Innovation. 5 pm: lecture given by the astronauts for CERN personnel and summer students in the Main Auditorium. (Seats reserved for the summer students - contact: summer.student.info@cern.ch). ...

The Duke of York visits CERN

CERN Multimedia

2004-01-01

The Duke of York chats before inaugurating the UK@CERN exhibition. From left to right: Robert Aymar, CERN's Director General, the Duke of York, and leading UK scientists at CERN: Jim Virdee, CMS deputy spokeman; theorist John Ellis ; and Steve Myers, head of the AB Department. On 23 November, the Duke of York visited CERN and, in his capacity as the UK's Special Representative for International Trade and Investment, inaugurated the UK@CERN Exhibition. This biennial trade show was initially held in 1968, the first such exhibition by a CERN member state. This year 22 companies displayed goods and services that could be of interest to CERN scientists. In his inaugural speech, the Duke emphasized that business between companies and CERN "is a two-way information flow with mutual benefits." The companies make sales but also benefit from technologies that CERN transfers to them. CERN benefits from the exchange, the Duke said, addressing CERN's scientists, because it "frees your time for what you do best: science....

Simulation of accelerator-driven systems

International Nuclear Information System (INIS)

Kadi, Y.; Carminati, F.

2003-01-01

The neutronic calculations presented in this paper are a result of a state-of-the-art computer code package developed by the EET group at CERN. Both high-energy particle interactions and low-energy neutron transport are treated with a sophisticated method based on a full Monte Carlo simulation, together with modem nuclear data libraries. The code is designed to run both on parallel and scalar computers. A series of experiments carried out at the CERN-PS (i) confirmed that the spallation process is correctly predicted and (ii) validated the reliability of the predictions of the integral neutronic parameters of the Energy Amplifier Demonstration Facility. (author)

See how people wished CERN a happy birthday with #MyCERN60

CERN Multimedia

Kate Kahle

2014-01-01

In the run up to 29 September, the hashtag #MyCERN60 gave CERN people and CERN’s followers on social media the chance to wish CERN a happy 60th birthday. Here are some of the highlights.   When tasked with wishing the European Laboratory for Particle Physics a happy 60th birthday, what would you do? Would you draw a picture? Bake a cake? #MyCERN60 on Twitter (EN, FR), Facebook, Google+ and social.cern.ch, gave people the opportunity to send a personal birthday greeting to the Organization. The results were heart-warming. Below is a selection of some of the messages received: Image credits: top left Sanam Ganjian via Google+, top right Rose Hannert via Twitter, middle left Anna P and Tina Nantsou via Facebook, middle right Francesco Palmonari via Twitter, bottom left  Smita Darmora via Facebook, bottom middle Hannah McClow via Twitter, bottom right Katya Chong via Twitter. Croatian students from the "Fran Galović" Koprivnica school celebrating CERN...

From the CERN web: gravitational waves, magic numbers, innovation and more

CERN Multimedia

2016-01-01

This section highlights articles, blog posts and press releases published in the CERN web environment over the past weeks. This way, you won’t miss a thing...     Simulation of two massive black holes merging, based on data collected from the LIGO collaboration on 14 September 2015. (Image: LIGO Collaboration © 2016 SXS) The hills are alive, with the sound of gravitational waves 12 February – ATLAS Collaboration It’s 16:00 CET at CERN and I’m sitting in the CERN Main Auditorium. The room is buzzing with excitement, not unlike the day in 2012 when the Higgs discovery was announced in this very room. But today the announcement is not from CERN, but the LIGO experiment which is spread across two continents. Many expect the announcement to be about a discovery of gravitational waves, as predicted by Einstein in 1916, but which have remained elusive until today… Continue to read…   The laser launch st...

Design of the New Wideband RF System for the CERN PS Booster

CERN Document Server

Paoluzzi, Mauro; Angoletta, Maria Elena; Arnaudon, Luca; Energico, Salvatore; Findlay, Alan; Haase, Matthias; Jaussi, Michael; Jones, Anthony; Landré, David; Molendijk, John; Quartullo, Danilo; Shaposhnikova, Elena

2016-01-01

For the renovation and upgrade of the CERN PS Booster (PSB) RF systems a development project was launched in 2012. The design, based on a new approach, aimed at replacing the existing tuned, narrowband RF systems with wideband, modular, solid-state driven units. A wide range of issues had to be addressed spanning from RF power production, radiation hardness of solid-state devices, active cancellation of beam-induced voltages, dedicated low-level electronics allowing multi-harmonic operation and beam stability. Following a three-year prototyping and testing campaign and two international reviews, the project endorsement came at the end of year 2015. It foresees the complete removal of present h1, h2 and h10 systems and the deployment of a new one covering all the frequency ranges from 1 MHz to 18 MHz. The four PSB rings will be equipped with 144 identical acceleration cells providing 24 kV total RF voltage per ring. This paper describes the design concepts, the retained solutions, the expected performances and...

CREATIVE COLLISIONS: ARTS @CERN

CERN Multimedia

CERN. Geneva

2012-01-01

In 2000, CERN hosted Signatures of the Invisible – one of the landmark initiatives in arts and science. In 2012, CERN is now initiating its own science/arts programme Collide@CERN in different arts disciplines. The first of these is in digital arts, and the international competition to find the winning artist is called the Prix Ars Electronica Collide@CERN. It was announced September 2011 at CERN’s first collaboration with an international arts festival – Ars Electronica in Linz. The competition attracted over 395 entries from 40 countries around the world. The winning artist, Julius Von Bismarck, will begin his two month residency here at CERN next month. Ariane Koek who leads on this initiative, discusses the residency programme, as well as the background about Art@CERN. History has shown that particle physics and the arts are great inspiration partners. The publication of the paper by Max Planck which gave birth to quantum mechanics as well as those by Einstein, heavily influenced some of the grea...

CERN and the environment

CERN Multimedia

Corinne Pralavorio

2016-01-01

New webpages answer common questions about CERN and the environment.   One of the new public webpages dedicated to CERN and the environment. Do your neighbours ever ask you about CERN’s environmental impact? And about radiation in particular? If so, the answers to those questions can now be found online on a new set of public webpages dedicated to CERN and the environment. These pages, put together by the Occupational Health, Safety and Environmental Protection (HSE) unit and the groups responsible for CERN's site maintenance, contain a wealth of information on topics linked to the environment, such as biodiversity at CERN, waste management, ionising radiation, and water and electricity consumption. “CERN forms part of the local landscape, with its numerous sites and scientific activities. It’s understandable that people living nearby have questions about the impact of these activities and it’s important that we respond with complete transp...

German visits to CERN

CERN Multimedia

2007-01-01

State secretary to Germany's Federal Ministry of Education and Research, Frieder Meyer-Krahmer, with CERN's Director-General Robert Aymar.On 21 February, Professor Frieder Meyer-Krahmer, State Secretary to Germany's Federal Ministry of Education and Research, came to CERN. He visited the ALICE and ATLAS experiments and the computing centre before meeting the CERN's Director-General, some German physicists and members of the top management. The Minister of Science, Research and the Arts of the Baden-Württemberg regional government, Peter Frankenberg, and CERN's Director-General, Robert Aymar, signing an agreement on education. In the background: Sigurd Lettow, CERN's Director of Finance and Human Resources, and Karl-Heinz Meisel, Rector of the Fachhochschule Karlsruhe. The Minister of Science, Research and the Arts of the Baden-Württemberg regional government, Prof. Peter Frankenberg, visited CERN on 23 February. He was accompanied by the Rector of the Fachhochschule Karlsruhe, Prof. Karl-Heinz Meisel, and b...

CERN Courier goes digital

CERN Multimedia

Christine Sutton, CERN Courier editor

2013-01-01

The January/February 2013 issue of the CERN Courier offers a new way to access the content – the first digital edition of the magazine.   The CERN Courier dates back to August 1959, when the first issue appeared, consisting of 8 black-and-white pages. Since then it has seen many changes in design and layout, leading to the current full-colour editions of more than 50 pages on average. It went on the web for the first time in October 1998, when IOP Publishing took over the production work. Now, we have taken another step forward with a digital edition that provides yet another means to access the content beyond the web and print editions, which continue as before. To download the digital edition, click here. To sign up to the new issue alert, please visit: http://cerncourier.com/cws/sign-up.

CERN Relay Race

CERN Document Server

CERN Running Club

2010-01-01

The CERN relay race will take place around the Meyrin site on Thursday 20 May, starting at 12.15. If possible, please avoid driving on the site during this 20-minute period. If you do meet runners while driving your car, please STOP until they have all passed. Thank you for your cooperation. Details on the route, and how to register your team for the relay race, can be found at: https://espace.cern.ch/Running-Club/CERN-Relay

CERN told to start technical thinking for next collider

CERN Multimedia

1998-01-01

CERN has been told to begin technical design work for the successor to the LHC. A report commissioned last year, suggests that future design work should focus on developping cost-effective high-field magnets (1 page).

The voice of Austrians at CERN

CERN Multimedia

2009-01-01

On 7 May the Austrian Minister for Science announced that, after over 50 years of membership, Austria would withdraw from CERN. By 18 May the Austrian Chancellor had reversed the decision. The Bulletin spoke to some of the Austrian community at CERN about the rollercoaster of events in between. var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-0753-kbps-640x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-Multirate-200-to-753-kbps-640x360-25-fps.wmv', 'false', 533, 300, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-posterframe-640x360-at-10-percent.jpg', '1180837', true, 'Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4'); To watch this video in German click here. There was jubil...

CERN Phonebook evolution

CERN Multimedia

Sébastien Dellabella

2012-01-01

Consolidating phonebooks at CERN We have had many phonebooks in the past, Xwho (now decommissioned), the NICE phonebook on Windows PCs, and more recently the web site people.cern.ch. However, diversity doesn’t always equate to improved efficiency or quality. So in order to reduce the maintenance effort and to improve the user experience, we have consolidated these various phonebooks into a single web application: phonebook.cern.ch Motivations for change The NICE Phonebook was introduced in the year 2000 when Windows 95 was the major desktop platform. Since then, a lot has changed not only in technology and the desktop landscape but also in the variety of devices used to access the data (notably smartphones and tablets). Updating the NICE phonebook is slow. Once the master database is modified it can take up to two days for the data to propagate to the application. Thus, we are now planning the retirement of the NICE phonebook application. The new Phonebook.cern.ch The new phonebook.cern.ch...

Apprenticeship at CERN

CERN Multimedia

Staff Association

2016-01-01

In 1961, based on the finding that the evolution of the labour market created a growing need for qualified staff, a first agreement between the Republic and Canton of Geneva and CERN was signed. One of the objectives of this agreement was the vocational training of young electronics and physics laboratory technicians. CERN, an important stakeholder in the local economy, highlighted with this agreement its willingness to participate in the local social and economic development. The first apprentice arrived at CERN in 1965. In 1971, the apprenticeship centre was created; it now hosts over twenty apprentices in total and welcomes about six new apprentices each year. These apprenticeships are for young people aged between 15 and 21 years, coming from one of the CERN Member States, and having completed their mandatory education, e.g. 11th grade in Switzerland or 3ème in France. The training is divided between working time at CERN and one or two days per week at school (CFPT in Geneva for electronics or ...

CERN television news

CERN Multimedia

2002-01-01

CERN events brought right to your desktop by the new video bulletin.   CERN now has its very own news broadcast , or rather 'webcast', with a host of special reports and even a star presenter. From today onwards, just go to the Bulletin's web page, click on the 'video news' link and sit back and enjoy the latest news about CERN, presented in images by Wendy Korda. The ten-minute newscast in both French and English, the Organization's two official languages, presents interviews, pictures of experiments and computer-generated graphics, bringing you right up to date with some of the Laboratory's latest stories. The show concludes with a selection of the best snapshots taken by the CERN Photo Lab. So every one or two months CERN's Audio-Video Service (ETT/DH) will be putting together a video news report that you can watch on your own desktop computer. Daniel Boileau, Patrick Gilbert de Vautibault and Jacques Fichet, the Service's three technicians, came up with the idea of producing this regular feat...

CERN Relay Race

CERN Multimedia

2009-01-01

The CERN relay race, now in its 39th year, is already a well-known tradition, but this year the organizers say the event will have even more of a festival feeling. Just off the starting line of the CERN relay race.For the past few years, spectators and runners at the CERN relay race have been able to enjoy a beer while listening to music from the CERN music and jazz clubs. But this year the organizers are aiming for "even more of a festival atmosphere". As David Nisbet, President of the CERN running club and organizer of the relay race, says: "Work is not just about getting your head down and doing the theory, it’s also about enjoying the company of your colleagues." This year, on top of music from the Santa Luis Band and the Canettes Blues Band, there will be demonstrations from the Aikido and softball clubs, a stretching session by the Fitness club, as well as various stalls and of course, the well-earned beer from AGLUP, the B...

Radiography at CERN

CERN Multimedia

HSE Unit

2014-01-01

What is industrial radiography? It is a non-destructive method with a wide variety of applications, such as inspecting the quality of a weld. It uses high-energy radioactive sources or an X-ray generator.   Is this inspection technique used at CERN? Yes, it is widely used at CERN by the EN-MME Group, which outsources the work to one or more companies, depending on the workload. Is it possible to carry out radiography anywhere at CERN? Yes, it is possible to carry out radiography in any building/accelerator/experiment area at CERN (including in areas which are not normally subject to radiological hazards). When is radiography carried out? It normally takes place outside of working hours (7 p.m. to 6 a.m.). How will I know if radiography is taking place in my building? If this activity is planned in a CERN building, notices will be affixed to all of its main entrance doors at least 24 hours in advance. What are the risks? There is a risk of exposure to very high levels of radiation, dep...

CERN CAR STICKERS

CERN Multimedia

Service Accueil et Controle d'Accès; ST Division

1999-01-01

In accordance with Operational Circular n¡ 2, paragraph 21, CERN car stickers are to be renewed. The new stickers are now available and will be valid for a year.Youare therefore requested:either to obtain them from the distribution points for new stickers (see below); or to send us the application form below, duly completed, via the internal mail; or to complete the application form directly via the Web at the address: http://cern.ch/registration-stickers. Each vehicle has to carry a sticker and needs a separate application form.Vehicles bearing CERN diplomatic plates (CD07, 431K and CD series) do not need a sticker for access to the CERN areas.Thank you.List of distribution points:Registration Service (bldg 55 1st floor), open from 07h30 to 16h30. Building 33 (entrance hall), open from 08h00 to 18h00. Building 120 (ground floor), outside working hours.Name Surname CERN identification number Vehicle registration plates Country issuing the plates Vehicle ma...

A ring image Cerenkov detector for the CERN Omega Spectrometer

International Nuclear Information System (INIS)

Davenport, M.; Deol, R.S.; Flower, P.S.

1983-05-01

A development program has been undertaken to produce a large ring image Cerenkov detector (RICH) for use at the CERN Omega Spectrometer. A prototype Cerenkov counter has been constructed and successfully operated in a high energy particle beam, Cerenkov rings having been observed in an experimental time projection chamber (TPC) using the photoionising agents Triethylamine (TEA) and Tetrakis (dimethylamine) ethylene (TMAE). Systematic measurements have been made of the optical properties of window materials and reflecting surfaces in the vacuum ultraviolet region. Results of these tests are presented, and the design of the large detector based on these experiences together with Monte Carlo simulations of the events expected in the WA69 experiment, is discussed. (author)

Dynamics and tolerances for the CERN interdigital H LINAC

International Nuclear Information System (INIS)

Valero, S.; Ratzinger, U.

1992-01-01

A three tank interdigital H structure has been chosen for the 0.25 to 4.2 MeV/u part of the CERN heavy-ion injector linac. The complete design has been developed by GSI, in particular the longitudinal dimensions have been determined and multi-particle studies have been made using the program LORAS. Some RF tolerance studies have also be made at CERN using this program. For more general approach to the dynamics, the program DYNAC is being used at CERN especially where statistical analyses are essential i.e for determining emittance growth, tolerances on accelerator parameters and alignment. The approaches and results of these two programs are compared for this novel type of accelerator

Designing the Four Rod Crab Cavity for the High-Luminosity LHC upgrade.

CERN Document Server

Hall, Ben

2014-01-01

This thesis presents the design for a novel compact crab cavity for the HL-LHC upgrade at CERN, Geneva. The LHC requires 400MHz RF cavities that can provide up to 10MV transverse gradient across two to three cavities with suit- ably low surface fields for continual operation. As a result, a cavity design was required that would be optimised to these new parameters. From initial design studies based on Jefferson Laboratory’s CEBAF deflector, extensive optimiza- tion was carried out to design a superconducting crab cavity, dubbed the Four Rod Crab Cavity (4RCC). The design underwent several iterations throughout the course of the project due to changing requirements from CERN, particularly space requirements inside the LHC. In addition, it was decided that a focus on field flatness was required. An aluminium prototype was then constructed from the finalised and computer-simulated design to confirm the designed field flat- ness. Additional computer simulation studies using CST were performed to en-...

CERN Library | Book presentation: "60 years of CERN experiments and discoveries" | 15 December

CERN Document Server

CERN Library

2015-01-01

"60 years of CERN experiments and discoveries", edited by Herwig Schopper and Luigi Di Lella.   Tuesday 15 December at 16:00 Room C (Building 61) The presentation will be followed by refreshments The book contains a description of the most important experimental results achieved at CERN during the past 60 years, from the mid-1950s to the latest discovery of the Higgs particle. It covers the results from early accelerators at CERN to the most recent results at the LHC and thus provides an excellent review of the achievements of this outstanding laboratory. It reflects not only the impressive scientific progress achieved during the past six decades but demonstrates also the special way of successful international collaboration developed at CERN. The e-book is available in Open Access here thanks to an agreement between CERN and the publisher. "60 years of CERN experiments and discoveries", ed. by Herwig Schopper and Luigi Di Lella, World Scientific, 2015, ISBN 9789...

Courrier CERN

CERN Multimedia

2015-01-01

Example of the cover page of the French version of the CERN Courier; Courrier CERN from January 1962. The journal was published both in English and French up to volume 45, no. 5, June 2005. Since then there is a single-language edition where articles are published either in French or English with an abstract in the other language.

CERN Technical Training Programme: Learning for the LHC!

CERN Multimedia

2003-01-01

In collaboration with AS and AC divisions, the Technical Training Programme is launching EVM Hands-on Tutorials specifically designed for those people involved in the current EVM for LHC exercise. The goal of the EVM Hands-on Training Sessions is to provide insight in Earned Value Management as implemented at CERN. Following this course will enable you to understand the EVM methodology, the tools used at CERN, the procedures used for the data-collection and data-reporting and assist you in analysing cost & schedule variances. The course is an intensive 2-hour 'hands-on' training session. If you are interested in this course, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training web pages: http://www.cern.ch/TechnicalTraining/

CERN Technical Training Programme: Learning for the LHC !

CERN Multimedia

2003-01-01

In collaboration with AS and AC divisions, the Technical Training Programme is launching EVM Hands-on Tutorials specifically designed for those people involved in the current EVM for LHC exercise. The goal of the EVM Hands-on Training Sessions is to provide insight in Earned Value Management as implemented at CERN. Following this course will enable you to understand the EVM methodology, the tools used at CERN, the procedures used for the data-collection and data-reporting and assist you in analysing cost & schedule variances. The course is an intensive 2-hour 'hands-on' training session. If you are interested in this course, please discuss with your supervisor or your DTO. More information and online registration by EDH are available from the Technical Training web pages: http://www.cern.ch/TechnicalTraining/

Service management at CERN with Service-Now

International Nuclear Information System (INIS)

Toteva, Z; Fedorko, I; Hefferman, J; Lemaitre, S; Mira, O Pera; Alonso, R Alvarez; Cheimariou, M-E; Clavo, D Martin; Granda, E Alvarez; Pedreira, P Martinez

2012-01-01

The Information Technology (IT) and the General Services (GS) departments at CERN have decided to combine their extensive experience in support for IT and non-IT services towards a common goal – to bring the services closer to the end user based on Information Technology Infrastructure Library (ITIL) best practice. The collaborative efforts have so far produced definitions for the incident and the request fulfilment processes which are based on a unique two-dimensional service catalogue that combines both the user and the support team views of all services. After an extensive evaluation of the available industrial solutions, Service-now was selected as the tool to implement the CERN Service-Management processes. The initial release of the tool provided an attractive web portal for the users and successfully implemented two basic ITIL processes; the incident management and the request fulfilment processes. It also integrated with the CERN personnel databases and the LHC GRID ticketing system. Subsequent releases continued to integrate with other third-party tools like the facility management systems of CERN as well as to implement new processes such as change management. Independently from those new development activities it was decided to simplify the request fulfilment process in order to achieve easier acceptance by the CERN user community. We believe that due to the high modularity of the Service-now tool, the parallel design of ITIL processes e.g., event management and non-ITIL processes, e.g., computer centre hardware management, will be easily achieved. This presentation will describe the experience that we have acquired and the techniques that were followed to achieve the CERN customization of the Service-Now tool.

News regarding Mobility at CERN

CERN Multimedia

2016-01-01

CERN Bikes CERN owns a fleet of more than 500 bikes, managed by the Mobility Centre (bdg. 6167). Members of CERN personnel (MPE and MPA) can use these free of charge during work-related activities at CERN (a security deposit is requested). Between 1st of June to 30th September anyone, except Summer Students, who wish to benefit from this service shall pay 1 CHF per day. As from the 1st of August, the CERN bike rental requests are done via the Service Now (SNOW) Portal. For more information, please consult: http://cern.ch/bike-rental.   CERN Cars More than 60 vehicles are available for rent by members of personnel (MPE and MPA) at the Mobility Center (bdg. 6167). As from the 5th of September you can submit reservation requests via the new EDH Car Rental Request document. As a reminder, the Terms of Use are the following: Operational Circular n° 4 (rev.1), governing the use of CERN vehicles;   Any use of the service must be authorised by the concerned Head of Department or Team Leader...

CERN internal communication is evolving

CERN Multimedia

2016-01-01

CERN news will now be regularly updated on the CERN People page (see here).      Dear readers, All over the world, communication is becoming increasingly instantaneous, with news published in real time on websites and social networks. In order to keep pace with these changes, CERN's internal communication is evolving too. From now on, you will be informed of what’s happening at CERN more often via the “CERN people” page, which will frequently be updated with news. The Bulletin is following this trend too: twice a month, we will compile the most important articles published on the CERN site, with a brand-new layout. You will receive an e-mail every two weeks as soon as this new form of the Bulletin is available. If you have interesting news or stories to share, tell us about them through the form at: https://communications.web.cern.ch/got-story-cern-website​. You can also find out about news from CERN in real time...

Un ministre britannique inaugure au CERN les journées WWW

CERN Multimedia

CERN Press Office. Geneva

1995-01-01

On 8 March, UK Science Minister David Hunt opened CERN's 'World-Wide Web Days', a conference designed to give journalists, educators and communication experts a practical introduction to this new telecommunications revolution. Citing CERN's invention of the Web as the latest in a long line of unforseeable spin-offs, the Minister praised the vital role played by fundamental research: "By working at the extreme limits of present technology", said Hunt, "CERN and other basic research laboratories help to break new technological ground and sow the seeds of what will become mainstream manufacturing in the future."

Statistical simulations of machine errors for LINAC4

CERN Document Server

Baylac, M.; Froidefond, E.; Sargsyan, E.

2006-01-01

LINAC 4 is a normal conducting H- linac proposed at CERN to provide a higher proton flux to the CERN accelerator chain. It should replace the existing LINAC 2 as injector to the Proton Synchrotron Booster and can also operate in the future as the front end of the SPL, a 3.5 GeV Superconductingg Proton Linac. LINAC 4 consists of a Radio-Frequency Quadrupole, a chopper line, a Drift Tube Linac (DTL) and a Cell Coupled DTL all operating at 352 MHz and finally a Side Coupled Linac at 704 MHz. Beam dynamics was studied and optimized performing end-to-end simulations. This paper presents statistical simulations of machine errors which were performed in order to validate the proposed design.

CASE in CERN's accelerator sector

International Nuclear Information System (INIS)

Albrecht, A.; Cabas-Alonso, A.; Chevrier, F.

1992-01-01

As in the software industry where computer aided software engineering (CASE) methodologies and tools are commonly used, CERN endeavours to introduce this technology to improve the efficiency of designing, producing and maintaining software. A large project is currently under development in the administrative area whereas a dedicated group had been set up to evaluate state of the art techniques for software development relating to physics experiments. A similar activity, though on a smaller scale, has been initiated in the accelerator sector also in view of the large amount of software that will be required by the LEP200 and the LHC projects. This paper briefly describes this technology and gives an account of current experience with the use of CASE methods and tools for technical projects in the accelerator sector at CERN. (author)

Summer at CERN: a time to make friends

CERN Multimedia

2013-01-01

Summer brings the opportunity for many of us to spend time enjoying the company of our families and friends. It also brings a new generation of young people to CERN – the summer students.   We often talk about the extended CERN community as a being like a big family, where the common bond is the science we do. The summer students who join us every year are in many ways the newest additions to this family. This year we have welcomed 276 students in total, with an impressive 133 from non-Member states. As usual they are joining in the learning experience that the programme offers and taking the opportunity to socialise. However, this year they are showing a particular enthusiasm for developing activities together that are linked to spreading the message about CERN. They’ve shown great support for the CERN Summer Student Webfest – now in its second year - where they were invited to work in teams and design web apps that will encourage the public to learn more abou...

CERN & Society launches donation portal

CERN Multimedia

Cian O'Luanaigh

2014-01-01

The CERN & Society programme brings together projects in the areas of education and outreach, innovation and knowledge exchange, and culture and arts, that spread the CERN spirit of scientific curiosity for the inspiration and benefit of society. Today, CERN & Society is launching its "giving" website – a portal to allow donors to contribute to various projects and forge new relationships with CERN.   "The CERN & Society initiative in its embryonic form began almost three years ago, with the feeling that the laboratory could play a bigger role for the benefit of society," says Matteo Castoldi, Head of the CERN Development Office, who, with his team, is seeking supporters and ambassadors for the CERN & Society initiative. "The concept is not completely new – in some sense it is embedded in CERN’s DNA, as the laboratory helps society by creating knowledge and new technologies – but we would like to d...

CERN in the park

CERN Multimedia

2002-01-01

CERN will be the centre of debate at a 'Café scientifique' on Monday 29 April. The aim of the Cafés scientifiques, which are organised by the association of Bancs Publics, is to kindle discussion between ordinary people and specialists in a scientific field. This Monday, Maurice Bourquin, President of the CERN Council, Hans Hoffmann, Director of Technology Transfer and Scientific Computing at CERN, Gilbert Guignard, a physicist at CERN, and Ruhal Floris, who teaches mathematical didactics at the University of Geneva, will explain the usefulness and contributions to science of the world's biggest laboratory for particle physics. What is CERN for? Monday 29 April at 18.30 Musée d'histoire des sciences, Geneva (in the park Perle du Lac) Entry free Wine and buffet after the discussion

Proposal for the award of a contract for the design, supply, installation, commissioning and testing at CERN of eight helium dryer units for the LHC

CERN Document Server

2001-01-01

This document concerns the award of a contract for the design, supply, installation, commissioning and testing at CERN of eight helium dryer units for the LHC. Following a market survey carried out among 42 firms in ten Member States, a call for tenders (IT-2722/LHC/LHC) was sent on 10 August 2000 to seven firms and three consortia, consisting of two firms each, in seven Member States. By the closing date, CERN had received five tenders from three firms and two consortia in five Member States. The Finance Committee is invited to agree to the negotiation of a contract with the firm COSMI (IT), the lowest bidder fulfilling the technical requirements, for the design, supply, installation, commissioning and testing at CERN of eight helium dryer units for a total amount of 3 514 779 euros, (5 307 329 Swiss francs), not subject to revision, with options for additional equipment for heating the adsorber bed and additional heat exchanger/condenser equipment, for an additional amount of 80 081 euros (120 923 Swiss fra...

CERN Relay Race 2018

CERN Document Server

CERN Running club

2018-01-01

The CERN running club, in collaboration with the Staff Association, is happy to announce the 2018 relay race edition. It will take place on Thursday, May 24th and will consist as every year in a round trip of the CERN Meyrin site in teams of 6 members. It is a fun event, and you do not have to run fast to enjoy it. Registrations will be open from May 1st to May 22nd on the running club web site. All information concerning the race and the registration are available there too: http://runningclub.web.cern.ch/content/cern-relay-race. A video of the previous edition is also available here : http://cern.ch/go/Nk7C. As every year, there will be animations starting at noon on the lawn in front of restaurant 1, and information stands for many CERN associations and clubs will be available. The running club partners will also be participate in the event, namely Berthie Sport, Interfon and Uniqa.

CERN openlab Open Day

CERN Multimedia

Andrew Purcell

2015-01-01

CERN openlab is the unique public-private partnership between CERN and leading companies in the field of information and communication technology. The programme is now entering an exciting new phase and is expanding to include other public research organisations for the first time. A special event will be held at CERN to mark this occasion.   CERN openlab was created in 2001 and is now entering its fifth three-year phase (2015-2017). Its mission is to accelerate the development of cutting-edge solutions to be used by the scientific community to control the operations of complex machines and to analyse the vast amounts of data produced by physics experiments. During Run 2 of the LHC, it is expected that the CERN Data Centre will store more than 30 petabytes of data per year from the LHC experiments, which is equivalent to about 1.2 million Blu-ray discs, or 250 years of HD video. Testing in this demanding environment provides the companies collaborating in CERN openlab with valuable feedback o...

CERN Yoga club

CERN Multimedia

Le comité du club de yoga du CERN

2017-01-01

Members of the CERN Yoga club are invited to the General Assembly of the club which will take place on: Wednesday 5 July at 14.00 in conference room 504-E-005 (Next to Yoga room) The agenda is available on the club's website: cern.ch/club-yoga/ If you are unable to participate, please elect a proxy voter to vote on your behalf (available from your teacher or in the Yoga room) – these can be addressed to: cernyoga@cern.ch

Britain at CERN

CERN Multimedia

CERN Press Office. Geneva

1998-01-01

It was thirty years ago that British industry held the first ever trade fair at CERN and industrial links between Britain and the Laboratory have never looked back. Speaking at the opening of the 1998 "Britain at CERN" exhibition on 20 October, H.E. Mr Christopher Hulse, British Ambassador to Switzerland, underlined the value of CERN contracts to British industry saying that "The prize is well worth going for, I understand that contracts worth  1.5bn will be awarded over the next six years".

Get all the official CERN holidays automatically added to your CERN mailbox calendar

CERN Multimedia

CERN Mail Services

2013-01-01

A new tool has been created that makes it easy to check the official CERN holidays. These holidays will appear automatically in your calendar. Currently, to check the official CERN holidays, you had to consult either the CERN website or EDH. Now you can see these holidays in your CERN calendar together with absences, meetings and other events. To take advantage of this feature: add yourself as member of the e-group “holidays-to-calendar” here. You can also use this link. Your calendar will be updated the very next day.

submitter LHC@Home: a BOINC-based volunteer computing infrastructure for physics studies at CERN

CERN Document Server

Barranco, Javier; Cameron, David; Crouch, Matthew; De Maria, Riccardo; Field, Laurence; Giovannozzi, Massimo; Hermes, Pascal; Høimyr, Nils; Kaltchev, Dobrin; Karastathis, Nikos; Luzzi, Cinzia; Maclean, Ewen; McIntosh, Eric; Mereghetti, Alessio; Molson, James; Nosochkov, Yuri; Pieloni, Tatiana; Reid, Ivan D; Rivkin, Lenny; Segal, Ben; Sjobak, Kyrre; Skands, Peter; Tambasco, Claudia; Van der Veken, Frederik; Zacharov, Igor

2017-01-01

The LHC@Home BOINC project has provided computing capacity for numerical simulations to researchers at CERN since 2004, and has since 2011 been expanded with a wider range of applications. The traditional CERN accelerator physics simulation code SixTrack enjoys continuing volunteers support, and thanks to virtualisation a number of applications from the LHC experiment collaborations and particle theory groups have joined the consolidated LHC@Home BOINC project. This paper addresses the challenges related to traditional and virtualized applications in the BOINC environment, and how volunteer computing has been integrated into the overall computing strategy of the laboratory through the consolidated LHC@Home service. Thanks to the computing power provided by volunteers joining LHC@Home, numerous accelerator beam physics studies have been carried out, yielding an improved understanding of charged particle dynamics in the CERN Large Hadron Collider (LHC) and its future upgrades. The main results are highlighted i...

"Infinitely CERN Memories from 50 years of research" CERN and Editions Suzanne Hurter are publishing a beautiful book, "Infinitely CERN", to commemorate the human and scientific adventure of CERN.

CERN Multimedia

Maximilien Brice

2004-01-01

The book tells the history of CERN through the voices of those who lived it. Highlights such as scientific events, technical achievements and CERN's role as an international organization in Geneva, are recalled chronologically by people who witnessed them: administrators, engineers and physicists, including Georges Charpak, Carlo Rubbia and Simon van der Meer, who received the Nobel Prize in physics for discoveries made at CERN.

Design of fault simulator

Energy Technology Data Exchange (ETDEWEB)

Gabbar, Hossam A. [Faculty of Energy Systems and Nuclear Science, University of Ontario Institute of Technology (UOIT), Ontario, L1H 7K4 (Canada)], E-mail: hossam.gabbar@uoit.ca; Sayed, Hanaa E.; Osunleke, Ajiboye S. [Okayama University, Graduate School of Natural Science and Technology, Division of Industrial Innovation Sciences Department of Intelligent Systems Engineering, Okayama 700-8530 (Japan); Masanobu, Hara [AspenTech Japan Co., Ltd., Kojimachi Crystal City 10F, Kojimachi, Chiyoda-ku, Tokyo 102-0083 (Japan)

2009-08-15

Fault simulator is proposed to understand and evaluate all possible fault propagation scenarios, which is an essential part of safety design and operation design and support of chemical/production processes. Process models are constructed and integrated with fault models, which are formulated in qualitative manner using fault semantic networks (FSN). Trend analysis techniques are used to map real time and simulation quantitative data into qualitative fault models for better decision support and tuning of FSN. The design of the proposed fault simulator is described and applied on experimental plant (G-Plant) to diagnose several fault scenarios. The proposed fault simulator will enable industrial plants to specify and validate safety requirements as part of safety system design as well as to support recovery and shutdown operation and disaster management.

Irradiation Facilities at CERN

CERN Document Server

Gkotse, Blerina; Carbonez, Pierre; Danzeca, Salvatore; Fabich, Adrian; Garcia, Alia, Ruben; Glaser, Maurice; Gorine, Georgi; Jaekel, Martin, Richard; Mateu,Suau, Isidre; Pezzullo, Giuseppe; Pozzi, Fabio; Ravotti, Federico; Silari, Marco; Tali, Maris

2017-01-01

CERN provides unique irradiation facilities for applications in many scientific fields. This paper summarizes the facilities currently operating for proton, gamma, mixed-field and electron irradiations, including their main usage, characteristics and information about their operation. The new CERN irradiation facilities database is also presented. This includes not only CERN facilities but also irradiation facilities available worldwide.

2005 CERN Relay Race

CERN Multimedia

Patrice Loiez

2005-01-01

The CERN Relay Race takes place each year in May and sees participants from all areas of the CERN staff. The winners in 2005 were The Shabbys with Los Latinos Volantes in second and Charmilles Technologies a close third. To add a touch of colour and levity, the CERN Jazz Club provided music at the finishing line.

France at CERN, from 23 to 25 September 2003

CERN Multimedia

Maximilien Brice

2003-01-01

From left to right: Jean-Claude Brisson, ILO, Robert Aymar, designated CERN Director General, Françoise Le Moign, Assistant General Consul at Geneva, Alain Guillouët, Head of the economic mission in Switzerland, French Embassy, Thierry Boquien, Ubifrance, French agency for international development of companies, Bernard Frois, Director of the Department for Energy, Transport, and Environment of the French Ministry for Research and New Technologies, Claude Détraz, CERN Director for Fixed Targets and Future Programmes.

Brazil and CERN get closer

CERN Multimedia

2002-01-01

The map of countries affiliated to CERN may in future include Brazil. On a visit to CERN last week, the Brazilian Minister of State for Science and Technology, Ronaldo Mota Sardenberg, expressed his country's interest in closer links to the Laboratory.   Luciano Maiani and the Brazilian Minister of State for Science and Technology Ronaldo Mota Sardenberg shake hands on CERN-Brazil co-operation. During his visit, the Minister and CERN Director General Luciano Maiani issued a joint statement for the continuation of a Co-operation Agreement first established in 1990. They also agreed to study the possibility of Brazil joining CERN-led Grid computing infrastructure projects. Brazilian physicists are already involved in the LHCb, ATLAS and CMS experiments. At the conclusion of the Minister's visit, he and Director-General Maiani agreed to establish a Working Group to examine ways of strengthening Brazil's links with CERN, and to prepare the way for a Brazilian request to CERN Council to become an Observer at th...

President of Chile at CERN

CERN Multimedia

2007-01-01

The President of Chile, Michelle Bachelet, in the ATLAS cavern with, from left to right, Peter Jenni, ATLAS Spokesman, Vivian Heyl, CONICYT President, and Robert Aymar, CERN Director-General. Robert Aymar, CERN Director-General, and Vivian Heyl, CONICYT President, signing a cooperation agreement between CERN and Chile’s Comisión Nacional de Investigación Científica y Tecnológica (CONICYT).The President of Chile, Michelle Bachelet, paid a visit to CERN during her three-day tour of Switzerland. The charismatic Michelle Bachelet and her large delegation were greeted by the CERN Director-General and then taken to see the ATLAS experiment and the LHC. She also took time to meet the Chilean community working at CERN, comprising several physicists in the Theory Group and the ATLAS experiment. The meeting was followed by the signing of a cooperation agreement between CERN and Chile’s Comisión Nacional de Investigación Científi...

Academic Training: Joint ILIAS-CAST-CERN Axion Training at CERN

CERN Multimedia

Françoise Benz

2005-01-01

2005-2006 ACADEMIC TRAINING PROGRAMME 30 November, 1 and 2 December PLACE - DETAILS: http://agenda.cern.ch/fullAgenda.php?ida=a056218 Joint ILIAS-CAST-CERN Axion Training at CERN The ILIAS (Integrated Large Infrastructure for Astroparticle Science) is co-organising a 3 day academic training session together with the CAST collaboration and the CERN Academic Training Programme on physics related to axion research, including open discussions between theorists and experimentalists. The intention of the lectures is to provide academic training for scientists engaged in axion research and to facilitate the often missing link between experiment and theory with the aim of encouraging young researchers to communicate with experts in the field. The lectures include topics which are not regularly covered by standard lectures at universities and should lead to a deeper understanding of the physics related to axions, which covers a broad field from QCD to astrophysics and cosmology. There will be an opportunity for ...

RSS based CERN Alerter. Information broadcast to all CERN offices.

CERN Multimedia

Otto, R

2007-01-01

Nearly every large organization uses a tool to broadcast messages and information across the internal campus (messages like alerts announcing interruption in services or just information about upcoming events). These tools typically allow administrators (operators) to send "targeted" messages which are sent only to specific groups of users or computers, e/g only those located in a specified building or connected to a particular computing service. CERN has a long history of such tools: CERNVMS€™s SPM_quotMESSAGE command, Zephyr and the most recent the NICE Alerter based on the NNTP protocol. The NICE Alerter used on all Windows-based computers had to be phased out as a consequence of phasing out NNTP at CERN. The new solution to broadcast information messages on the CERN campus continues to provide the service based on cross-platform technologies, hence minimizing custom developments and relying on commercial software as much as possible. The new system, called CERN Alerter, is based on RSS (Really Simpl...

CERN at the Post Office

CERN Multimedia

2006-01-01

In collaboration with CERN and the Conseil général de l'Ain, the French postal services of the Pays de Gex have released a new set of pre-paid envelopes paying tribute to CERN. The envelopes, which come in packets of ten, each featuring a different aspect of CERN, will be on sale from 6 June onwards. They will be available from five post offices in the Pays de Gex (Ferney-Voltaire, Prévessin-Moëns, Saint-Genis-Pouilly, Thoiry and CERN-Prévessin), as well as from the CERN Shop (Reception, Building 33). The envelopes were unveiled at an official ceremony on 23 May, which was attended by Jocelyne Boch, Vice-President of the Conseil général de l'Ain and Mayoress of Thoiry, as well as Marina Combe, Head of the Saint-Genis-Pouilly, Thoiry and CERN-Prévessin post offices, and Maximilian Metzger, CERN's Secretary-General. The last set of envelopes to feature CERN, which commemorated the Laboratory's 50th anniversary in 2004, were a huge success, with sales totalling 35 000 in less than a year. 'We received...

EUCYS prizewinner visits CERN

CERN Multimedia

Jennifer Toes

2016-01-01

Young Turkish student Baris Volkan Gürses visited CERN from 4 to 8 July after winning the prize in the 2015 European Contest for Young Scientists (EUCYS).    Baris Volkan Gürses, EUCYS prizewinner, visiting the Microcosm. After winning both regional and national competitions in Turkey, 18-year-old student Baris Volkan Gürses competed against 169 young scientists and was awarded a visit to CERN by EIROforum for his physics project in EUCYS 2015. His project, entitled “Generation of artificial gravity by using electrostatic force for prevention of muscle atrophy and osteoporosis occurring in gravity-free environments”, focused on the design of a mechanism to help with the impact of spaceflight on the human body. “My objective was to eliminate the negative effects of a gravity-free environment on astronauts who stay in space for longer periods of time, like in the International Space Station,” explained Volkan. &...

Lectures for CERN pensioners

CERN Multimedia

GS Department

2009-01-01

The CERN Medical Service and the Pensioners Association are pleased to invite CERN pensioners to a series of lectures given by professors and specialists from the Teaching Hospitals and the Faculty of Medicine of the University of Geneva on the following topic: PROMOTION OF OPTIMUM BRAIN AGEING The lectures will take place in the Main CERN Auditorium (Building 60) from 2.30 p.m. to 4.30 p.m. on the following dates: Thursday 15 January 2009: Diagnosing and treating Alzheimer’s disease Pr Gabriel GOLD Wednesday 25 February 2009: What is the brain reserve? Speaker’s name to be announced at a later date. The lectures will be given in French, with transparencies in English, and will be followed by a wide-ranging debate with the participants. CERN Medical Service - Pensioners Association - CERN-ESO (GAC-EPA)

The CERN Pension Fund: an eternal challenge

CERN Multimedia

Staff Association

2014-01-01

  Introduction By virtue of its status as an international organization, CERN and its employees do not operate under the labour laws and social security systems of the Host or Member States. Thus, the Organization has to establish its own social security scheme, including pension insurance, for the adequate protection of its employed personnel. This scheme must also be designed to allow the recruitment and retention of highly qualified personnel from all Member States. It are the Organization’s pension obligations that certain Member States want to reconsider. This is the first in a series of articles where we explain that reneging on their commitments regarding the pension Fund the Member States would create a great social injustice, very detrimental to the Organization, its staff and not compliant with international law. Principles and responsibilities The CERN Pension Fund (hereafter called the “Fund”) was set up by the CERN Council in December 1955. Its lega...

Open Days Guide for the CERN-savvy

CERN Multimedia

Katarina Anthony

2013-01-01

Do you think you know your Laboratory? Been there, done that? Well then prepare to be proven wrong! The CERN sites are hosting some spectacular tours, demonstrations and events to surprise even the most well-versed of CERNois. Take a look.   Do you have questions? We have the answers! If you’re heading straight for the Main Building on arrival, make sure to take a detour through the CERN Workshop (Map: B1). But be warned: this will be a long detour! Spread across six distinct areas, the CERN Workshop is the first-stop shop for accelerator and experiment prototypes. Welding, drilling, precision measurements, mechanical tests and even element design: it’s all done here. Technicians will be at work on dozens of machines and will be ready to answer your questions. It’s your chance to see detector components while they're still works-in-progress ( let us know if you spot any CLIC pieces! ) and to satisfy your inner “Bob the Builder”. Head...

CERN's Tree of Science at the Summit

CERN Multimedia

2004-01-01

The World Summit on the Information Society held its closing session at Palexpo on 12 December. During the Summit, CERN organised the SIS Forum, the Tree of Science, at Palexpo. Kofi Annan and Tim Berners-Lee, sending a message to 800 schools around the world, from the first Web server will remain one of the abiding images of the Science Stand organised by CERN as part of the World Summit on the Information Society last December. According to its designer, François Fluckiger (IT Department) this stand was not intended purely as an exhibition or as a lecture point but as a forum. Thirty-two scientific institutions throughout the world made their own contributions to the information society over the five days of the exhibition. In all, 42 science projects were exhibited to several thousand visitors under four themes: education and culture; health; environment, development and risks; fundamental sciences and enabling technologies. CERN's stand represented a tree with a trunk in the centre with scre...

Dutch hi-tech companies exhibit at CERN

CERN Multimedia

Roberto Cantoni

2010-01-01

Twenty-seven Dutch companies will present the state of the art of their technological developments at the industrial exhibition Holland @ CERN from 8 to 11 November. The exhibition is designed to help strengthen the ties between fundamental science and Dutch industry.   The exhibition, supported by the Dutch Ministry of Economic Affairs and organised by the Netherlands National Institute for Subatomic Physics (Nikhef), in cooperation with the Foundation for Fundamental Research on Matter (FOM), the FOM Institute for Plasma Physics Rijnhuizen, and Dutch Scientific, an association of manufacturers of scientific equipment, will be held in the Main Building from 8 to11 November. “The last Holland @ CERN exhibition took place fifteen years ago”, says Robert Klöpping from Nikhef, Dutch Industrial Liaison Officer for CERN and Purchasing Advisor for Grenoble ESRF. “This kind of event is very important for Dutch industry as it allows us to show what Dutch companies c...

Nobel prize-winner Heinrich Rohrer visits CERN

CERN Document Server

2008-01-01

The Nobel prize-winner Heinrich Rohrer met young scientists on a recent visit to the Laboratory. From left to right: Xavier Gréhant (CERN Openlab), Ewa Stanecka (ATLAS), Magda Kowalska (ISOLDE), Heinrich Rohrer, Stéphanie Beauceron (CMS) and Ana Gago Da Silva (UNOSAT).Heinrich Rohrer, who shared the 1986 Nobel prize for physics with Gerd Binnig for the design of the scanning tunnelling microscope, visited CERN on 25 June. Welcomed by the Director-General, Robert Aymar, he visited the ATLAS cavern and control room, the Computer Centre, the Unosat project, the Antimatter Decelerator and ISOLDE. At the end of his visit, he voiced his admiration for CERN and its personnel. As a renowned Nobel prize-winner Heinrich Rohrer has the opportunity to pass on his experience and enthusiasm to young scientists. During the evening meal, at which he met five young physicists and computer scientists, who were delighted with the chance to talk to him, he stressed the importance for re...

CERN openlab Open Day | 10 June

CERN Multimedia

2015-01-01

CERN openlab is now entering an exciting new phase and is expanding to include other public research organisations for the first time. To mark this occasion, a first-of-its-kind ‘CERN openlab Open Day’ event will be held at CERN on 10 June 2015.   CERN openlab is a unique public-private partnership between CERN and leading ICT companies. Its mission is to accelerate the development of cutting-edge solutions to be used by CERN’s scientific community. The ‘CERN openlab Open Day’ event will take place in the Main Auditorium on 10 June and will be an opportunity to learn more about the work carried out through CERN openlab to help tackle the challenges faced by the scientific community. Find out more: http://indico.cern.ch/event/381083/

CERN apprenticeships honoured at the Cité des Métiers

CERN Multimedia

2006-01-01

Florian Métral, an electronics apprentice at CERN, accepting his prize at the award ceremony.CERN's exhibition stand at the Cité des Métiers et des Formations. CERN has just taken part in the Cité des Métiers et des Formations for the first time. This job and training fair, designed to assist both young people and adults in their choice of profession, training or career change, was held at Palexpo, Geneva's main exhibition centre, from 13 to 19 November. CERN had its own stand, where the Laboratory's activities and its many different trades and training opportunities were on display. Throughout the week and the weekend, a series of guides and members of the HR Department took it in turns to present CERN and the wide range of training it offers students and apprentices. Apprentices came into the spotlight on 13 November, when the Union Industrielle Genevoise awarded prizes to the eight most meritorious apprentices in the field of mecatronics (mechanical and electronics engineering) in the Canton of Gene...

Parking regulations on the CERN sites

CERN Multimedia

General Infrastructure Services Department

2010-01-01

The site surveillance service is also responsible for supervising compliance with the parking regulations on the CERN site. In that context, it ensures that the following rules are complied with on the CERN car park: Vehicles may not be left on a CERN car park for longer than 5 consecutive working days. However, CERN users are entitled to leave their vehicles parked at CERN for a longer period in the car park near Building 588 , subject to completing the application form "Demande d'autorisation pour un stationnement de longue durée" (application for a long-term parking permit) and sending it to the Reception and Access Control Service (access.surveillance@cern.ch) prior to departure.   Parking spaces, which are in short supply in many crowded areas of the CERN site, must not be occupied by abandoned vehicles/wrecks. The service organizes the disposal of such vehicles. Any CERN users wishing to get rid of a private vehicle parked on one of the CERN car pa...

"10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN"

CERN Multimedia

FI Department

2008-01-01

On January 29-30, 2008 On 29 and 30 January 2008, the German Federal Ministry of Education and Research (BMBF) will join forces with CERN in organizing the "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN". The Industrial Exhibition provides the opportunity for some 30 German companies to present their products and services to the scientists and buyers of CERN, establish contacts and gather information on future purchasing opportunities. The main subjects will be the following: mechanical engineering, electrical engineering, electronics, civil engineering and buildings, data processing, radiation protection and vacuum and low temperature technology. The first ever "Innovation Forum at CERN" - open to all CERN Member States – will bring together under one roof researchers, innovators, and entrepreneurs to understand and discuss CERN’s applied technology. They will learn about the know-how accumulated through the LHC, the five detectors ...

"10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN"

CERN Multimedia

FI Department

2008-01-01

29-30 January 2008 On 29 and 30 January 2008, the German Federal Ministry of Education and Research (BMBF) will join forces with CERN in organizing the "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN". The Industrial Exhibition will provide the opportunity for some 30 German companies to present their products and services to the scientists and buyers of CERN, establish contacts and gather information on future purchasing opportunities. The main subjects will be the following: mechanical engineering, electrical engineering, electronics, civil engineering and buildings, data processing, radiation protection and vacuum and low temperature technology. The first ever "Innovation Forum at CERN" - open to all CERN Member States - will bring together under one roof researchers, innovators, and entrepreneurs to understand and discuss CERN’s applied technology. They will learn about the know-how accumulated through the LHC, the five detectors ...

A thorough spring-clean for CERN's Web pages

CERN Multimedia

2001-01-01

This coming Tuesday will see the unveiling of CERN's new user pages on the Web. Their simplified layout and design will make everybody's lives a whole lot easier. Stand by for Tuesday 17 April when, as announced in the Weekly Bulletin of 2 April (n°14/2001), the new newly-designed users welcome page will be hitting our screens as the default CERN home page. But don't worry, if you've got the blues for the good old blue-green home page it's still in service and, to ensure a smooth transition, will be maintained in parallel until 25 May. But in all likelihood you'll be quickly won over by the new-look pages, which are so much simpler to use. Welcome to the new Web! The aim of this revamp, led by the WPE (Web Public Education) group, is to simplify and introduce a more logical hierarchy into the menus and welcome pages on CERN's Intranet. In a second stage, the 'General Public' pages will get a similar makeover. The fact is that the number of links on the user pages, and in particular the welcome page...

Dynamics and tolerances for the CERN Interdigital H linac

International Nuclear Information System (INIS)

Bylinsky, Y.; Ratzinger, U.; Valero, S.

1992-01-01

A three tank Interdigital H structure has been chosen for the 0.25 to 4.2 MeV/u part of the CERN heavy-ion injector linac. The complete design has been developed by GSI; in particular the longitudinal dimensions have been determined and multi-particle studies have been made using the program LORAS. Some RF tolerance studies have also been made at CERN using this program. For a more general approach to the dynamics, the program DYNAC is being used at CERN, especially where statistical analyses are essential; i.e. for determining emittance growth, tolerances on accelerator parameters and alignment. The approaches and results of these two programs are compared for this novel type of accelerator. (Author) 6 refs., 3 tabs., 3 figs

2014 CERN Accelerator Schools: Beam Loss and Accelerator Protection

CERN Multimedia

2014-01-01

The US-CERN-JAPAN-RUSSIA Joint International Accelerator School is organising a course on Beam Loss and Accelerator Protection to be held in Newport Beach, California, USA from 5-14 November, 2014.    This school is intended for physicists and engineers who are or may be engaged in the design, construction, and/or operation of accelerators with high power photon or particle beams and/or accelerator sub-systems with large stored energy. Application deadlines are 15 August and 4 September. Further information on this Joint School can be found at: http://cas.web.cern.ch/cas/JAS/Newport%20Beach%202014/NPBadvert.html http://indico.cern.ch/event/287647/ http://uspas.fnal.gov/programs/JAS/JAS14.shtml

In the CERN Library

CERN Multimedia

CERN PhotoLab

1963-01-01

Seen in this picture is Noria Christophoridou, librarian of the Greek Atomic Energy Commission, who has been sent by her government to CERN for a year to widen her experience of library and documentation services. In the photograph she is providing information to Kurt Gottfried, a CERN visiting scientist from Harvard University, who is spending a year with CERN's Theory Division

CERN accelerator school: Antiprotons for colliding beam facilities

International Nuclear Information System (INIS)

Bryant, P.; Newman, S.

1984-01-01

This is a specialized course which addresses a wide spectrum of theoretical and technological problems confronting the designer of an antiproton facility for high-energy-physics research. A broad and profound basis is provided by the lecturers' substantial experience gained over many years with CERN's unique equipment. Topics include beam optics, special lattices for antiproton accumulation and storage rings, antiproton production, stochastic cooling, acceleration and storage, r.f. noise, r.f. beam manipulations, beam-beam interaction, beam stability due to ion accumulation, and diagnostics. The SPS (Super Proton Synchrotron) panti p collider, LEAR (the Low Energy Antiproton Ring at CERN), antiprotons in the ISR (Intersecting Storage Rings), the new antiproton collector (ACOL) and gas jet targets are also discussed. A table is included listing the parameters of all CERN's accelerators and storage rings. See hints under the relevant topics. (orig./HSI)

Become a CERN WhiteHat

CERN Multimedia

CERN. Geneva

2014-01-01

Discovering CERN's weaknesses is as important as ever. Become a CERN WhiteHat and help us poking around CERN computing services and web applications. All you need is to apply and get the appropriate training...

People and things. CERN Courier, Jan-Feb 1988, v. 28(1)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1988-01-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The CERN history project yielded its first fruits a year ago with the publication of a volume covering the years of the creation of CERN. 17 November brought together many of the leading figures from the second period under study – covering the construction and first operation of the proton synchrotron through to the end of 1965 when the intersecting storage rings were authorized. The 3rd ESO/CERN Symposium on Cosmology, Astronomy and Fundamental Physics will be held at the Palazzo Re Enzo, Bologna (Italy) from 16 to 20 May. New annual event, the next CERN Computing School will be in Oxford, UK, from 14-27 August: The programme covers software engineering, document preparation, communications and networks, hardware, data acquisition, computer-aided electronics design etc.

People and things. CERN Courier, Jan-Feb 1988, v. 28(1)

International Nuclear Information System (INIS)

Anon.

1988-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The CERN history project yielded its first fruits a year ago with the publication of a volume covering the years of the creation of CERN. 17 November brought together many of the leading figures from the second period under study – covering the construction and first operation of the proton synchrotron through to the end of 1965 when the intersecting storage rings were authorized. The 3rd ESO/CERN Symposium on Cosmology, Astronomy and Fundamental Physics will be held at the Palazzo Re Enzo, Bologna (Italy) from 16 to 20 May. New annual event, the next CERN Computing School will be in Oxford, UK, from 14-27 August: The programme covers software engineering, document preparation, communications and networks, hardware, data acquisition, computer-aided electronics design etc

The CERN Super Proton Synchrotron as a tool to study high energy density physics

CERN Document Server

Tahir, N A; Brugger, M; Assmann, R; Shutov, A V; Lomonosov, I V; Piriz, A R; Hoffmann, D H H; Deutsch, C; Fortov3, V E

2008-01-01

An experimental facility named HiRadMat, will be constructed at CERN to study the impact of the 450 GeV c−1 proton beam generated by the Super Proton Synchrotron (SPS) on solid targets. This is designed to study damage caused to the equipment including absorbers, collimators and others in case of an accidental release of the beam energy. This paper presents two-dimensional numerical simulations of target behavior irradiated by the SPS beam. These numerical simulations have shown that the target will be completely destroyed in such an accident, thereby generating high energy density (HED) matter. This study therefore suggests that this facility may also be used for carrying out dedicated experiments to study HED states in matter.

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE CERN EDMS – Introduction\t(Français)\t26.06\t1 jour Videoconferencing and collaborative tools\t(English)\t27.06\t2 hours CERN EDMS MTF in practice\t(Français)\t27.06\t½ journée A hands-on overview of EVO\t(English)\t27.06\t½ day CERN EDMS for Local Administrators\t(Français)\t30.06-01.07\t2 jours Excel 2007 – Level 2 ECDL\t(English)\t30.06-01.07\t2 days Access 2007 – Niveau 2: ECDL\t(Français)\t01-04.07\t4 ½ journées Hands-On Design Patterns for Object-oriented Programming (English)\t02-04.07\t3 days Windows Vista Advanced\t(Français)\t10.07\t½ journée Windows Vista\t(Français)\t11.07\t½ journée SOFTWARE AND SYSTEM TECHNOLOGIES JCOP – Finite State Machines in the JCOP Framework\t(English)\t24-26.06\t3 days ...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). CERN EDMS for Local Administrators (English) 27-28.03 2 days Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t0.5 jour Windows VISTA (Français)\t04.04\t1 jour Sharepoint Collaboration Worskpace\t(Français) 07-08.04\t2 jours CERN EDMS MTF in practice (English)\t09.04\t0.5 day Word 2007 : Niveau 1 ECDL (Français) 10-11.04\t2 jours Indico - Meeting Organization\t(Français)\t18.04\t1 day Indico – Conference Organization\t(Français)\t18.04\t1 day Word 2007: Niveau 2 ECDL\t(Français)\t28-29.04\t2 jours Excel 2007 – Niveau 2 ECDL (Français)\t05-06.05\t2 jours In Design: Introduct...

submitter Direct Drive and Eddy Current Septa Magnet Designs for CERN's PSB Extraction at 2 GeV

CERN Document Server

Szoke, Z; Balhan, B; Baud, C; Borburgh, J; Hourican, M; Masson, T; Prost, A

2016-01-01

In the framework of the LIU project, new septa magnets have been designed between CERN's PS booster (PSB) extraction and PS injection. The upgraded devices are to deal with the increased beam energy from 1.4 to 2 GeV at extraction of the PSB. The direct drive recombination septa in the PSB transfer line to the PS and the eddy current PS injection septum together with a bumper at injection have been investigated using finite-element software. For the recombination magnets, an increase in magnet length is sufficient to obtain the required deflection; however, for the PS injection elements, a more novel solution is necessary to also achieve increased robustness to extend the expected lifetime of the pulsed device. The injection septum will share the same vacuum vessel with an injection bumper, and both magnets will be located adjacent to each other. The new PS injection magnet will be the first septum operated at CERN based on eddy current technology. The magnetic modeling of the devices, the comparison of the p...

CERN safety system monitoring - SSM

International Nuclear Information System (INIS)

Hakulinen, T.; Ninin, P.; Valentini, F.; Gonzalez, J.; Salatko-Petryszcze, C.

2012-01-01

CERN SSM (Safety System Monitoring) is a system for monitoring state-of-health of the various access and safety systems of the CERN site and accelerator infrastructure. The emphasis of SSM is on the needs of maintenance and system operation with the aim of providing an independent and reliable verification path of the basic operational parameters of each system. Included are all network-connected devices, such as PLCs (local purpose control unit), servers, panel displays, operator posts, etc. The basic monitoring engine of SSM is a freely available system-monitoring framework Zabbix, on top of which a simplified traffic-light-type web-interface has been built. The web-interface of SSM is designed to be ultra-light to facilitate access from hand-held devices over slow connections. The underlying Zabbix system offers history and notification mechanisms typical of advanced monitoring systems. (authors)

Iran approaches CERN

CERN Multimedia

2002-01-01

Members of Parliament from the Islamic Republic of Iran visit SM18. From left to right : Ali Mojtahed-Shabestari, Deputy Ambassador of the Islamic Republic of Iran in Geneva, Diether Blechschmidt, from CERN, Abdol-Rahim Baharvand and Hossain Amiri, from the Iranian Parliament, Norbert Siegel, from CERN, Hossain Afarideh, Rasool Seddighi and Ahmad Shirzad from the Iranian Parliament. Five members of the Parliament of the Islamic Republic of Iran visited CERN for three days at the beginning of May. All of them have PhD's in Physics, as well as holding their job in politics. They are involved in legislation for science, research and education funding in Iran. Apart from their interest in CERN in general, they were especially attracted to the CMS detector, since an Iranian contribution to the LHC is now starting through a collaboration with the Institute for Studies in Theoretical Physics and Mathematics in Tehran.

Computer Security: protect CERN - respect copyrights

CERN Multimedia

Computer Security Team

2014-01-01

Are you a physicist who does complex mathematical calculations? Are you a webmaster who regularly embeds visual contents? Do you regularly present to large audiences? Are you an engineer who does sophisticated simulations of heat transfers, structural stability or electric circuits? Are you a technician who often uses CAD software? Do you like listening to music while being at CERN? Go ahead!   But make sure that you have legitimately obtained the software/images/music/videos you are using and hold valid licenses to run your software. Using illegal or pirated software/images/music/videos is not a trivial offense. It violates the CERN Computing Rules (OC5) and puts the Organization at risk! Vendors deserve credit and compensation. So make sure to buy your software via legitimate channels and use a valid and honestly obtained license. This also applies to “shareware” and software under open licenses, which might also come with a cost. Usually, only “freeware&rd...

Model United Nations comes to CERN

CERN Multimedia

Anaïs Schaeffer

2012-01-01

From 20 to 22 January pupils from international schools in Switzerland, France and Turkey came to CERN for three days of "UN-type" conferences.   The MUN organisers, who are all pupils at the Lycée international in Ferney-Voltaire, worked tirelessly for weeks to make the event a real success. The members of the MUN/MFNU association at the Lycée international in Ferney-Voltaire spent several months preparing for their first "Model United Nations" (MUN),  a simulation of a UN session at which young "diplomats" take on the role of delegates representing different nations to discuss a given topic. And as their chosen topic was science, it was only natural that they should hold the event at CERN. For three days, from 20 to 22 January, no fewer than 340 pupils from 12 international schools* in Switzerland, France and Turkey came together to deliberate, consult and debate on the importance of scientific progress fo...

Design and Development of a Diagnostics Client for a Beam Loss Measurement System at CERN

CERN Document Server

Angelogiannopoulos, Emmanouil; Jackson, Stephen

The European Organization for Nuclear Research, known as CERN, is one of the biggest research centers in the field of particle physics. Its main function is to provide particle accelerators and other infrastructure needed for high energy physics research. Particles are accelerated through a complex of accelerators and are brought into collision, in order to study the fundamental elements of matter and the forces acting between them. Of course, such complex and expensive machines need control and protection. For that purpose, a variety of different systems -hardware and/or software- is needed. One such system is the Beam Loss Monitoring (BLM) system of an accelerator. This kind of system is designed for measuring beam losses around an accelerator. An appropriate design of the BLM system and an appropriate location of the monitors enable a wide field of very useful beam diagnostics and machine protection possibilities. This thesis focuses on the design and development of a client application, which is realized ...

CERN: SC-33

Energy Technology Data Exchange (ETDEWEB)

Anon.

1991-06-15

On 22 April a forward-looking CERN also looked back for a day, when the 'SC-33' event reviewed the achievements of CERN's first machine, the 600 MeV SynchroCyclotron (SC), which closed down on 17 December after 33 years of valiant service.

CERN Infrastructure Evolution

CERN Document Server

Bell, Tim

2012-01-01

The CERN Computer Centre is reviewing strategies for optimizing the use of the existing infrastructure in the future, and in the likely scenario that any extension will be remote from CERN, and in the light of the way other large facilities are today being operated. Over the past six months, CERN has been investigating modern and widely-used tools and procedures used for virtualisation, clouds and fabric management in order to reduce operational effort, increase agility and support unattended remote computer centres. This presentation will give the details on the project’s motivations, current status and areas for future investigation.

CERN and Portugal

International Nuclear Information System (INIS)

Anon.

1995-01-01

In its continual tour of CERN Member States, the European Committee for Future Accelerators (ECFA) visited Lisbon, Portugal, on 21-22 April, where it met at the Instituto Superiore Tecnico, a technical university with 9,000 students. Portuguese particle physics is in a particularly healthy situation, having developed considerably following Portugal's admission to CERN in 1985. With support from Brussels, scientific infrastructure has developed rapidly, although the science base has yet to attain the levels seen in larger nations. The 45-strong population of experimentalists in Portugal, including 14 PhDs, represents a 2.5-fold increase since Portugal joined CERN ten years ago and is in line with the goal stated at the time. This successful development of experimental particle physics has benefited much from physicists returning from abroad (mainly France and the UK). The direct result of the efforts of a few individuals (notably J.M. Gago), this splendid achievement provides an excellent role model for new and potential CERN Member States. At present, particle physics represents some 3 0% of all Portuguese physics publications. This very special role (and the financial support it implies) provides a visible target, but one which can be defended as it provides a catalyst for other national scientific developments. The national hub is the Laboratory for experimental high energy physics and related R&D projects (LIP), with centres in Lisbon (Head, J.M. Gago) and Coimbra (Head, A. Policarpo). LIP, with close links to two universities in Lisbon and to the University of Coimbra, has developed into a centre of expertise and training in electronics, computing and software engineering. Present LIP funding is some 2 million Swiss francs/year (70% in Lisbon and 3 0% in Coimbra), covering most of the salaries of the nonuniversity people, the remainder being supported by grants from Portuguese and European programmes. Portugal's contribution to CERN's 1995 budget

CERN and Israel

International Nuclear Information System (INIS)

Anon.

1995-01-01

Israel (along with the US, Japan, Canada, the Russian Federation and India) is one of the CERN non- Member State nations targeted for substantial future participation in CERN's experimental programme, in particular for the LHC proton collider to be built in the 27-kilometre LEP tunnel and which was formally approved by CERN Council in December (January/February, page 1). In keeping with their illustrious scientific traditions, Israeli experimental physicists have collaborated in experiments at many of the world's major high energy Laboratories - Brookhaven, Fermilab and SLAC in the US, and in Europe, DESY, Hamburg, as well as CERN. However CERN, as the geographically closest major Laboratory (as well as the largest), plays a special role for Israeli scientists. At CERN, the advent of preparations in the early 1980s for the experimental programme at the LEP electron-positron collider was the signal for Israeli researchers to mount a concerted effort and contribute to one of the experiments - Opal - at a level comparable to that of major nations. This allowed Israeli teams to participate fully in the planning and construction phase of this branch of Big Science. Underlining this commitment, and to coordinate the various national agencies involved in this aspect of Big Science, in 1983 the Israel Commission for High Energy Physics (ICHEP) was formed. It is currently chaired by David Horn of Tel Aviv. The initial ICHEP/CERN contract established the official CERN/lsrael link under which, in the short-term, teams from three major research centres - the Weizmann Institute, Tel- Aviv University, and Haifa's Technion - contributed to Opal, as the flagship experiment, while providing a framework for longer-term collaboration. (At CERN, Israeli physicists also participate in the NA45 heavy ion experiment and the NA47 Spin Muon Collaboration - SMC.) Opal groups some 320 scientists from 32 research centres in eight countries, and includes a 21-strong Israeli

Lectures for CERN pensioners

CERN Multimedia

SC Unit

2008-01-01

The CERN Medical Service and the Pensioners Association are pleased to invite CERN pensioners to a series of lectures given by professors and specialists from the Teaching Hospitals and the Faculty of Medicine of the University of Geneva on the following topic: PROMOTION OF OPTIMUM BRAIN AGEING The lectures will take place in the Main CERN Auditorium (Building 60) from 2.30 p.m. to 4.30 p.m. on the following dates: Wednesday 12 November 2008: Assessing the extent of brain ageing Dr Dina ZEKRY Friday 12 December 2008: Can memory decline be prevented? Pr Jean-Pierre MICHEL Thursday 15 January 2009: Diagnosing and treating Alzheimer’s disease Pr Gabriel GOLD Wednesday 25 February 2009: What is the brain reserve? Speaker’s name to be announced at a later date The lectures will be given in French, with transparencies in English, and will be followed by a wide-ranging debate with the participants. CERN Medical Service - Pensioners Association - CERN-ESO (GAC-EPA)

Romanian President Visits CERN

CERN Multimedia

2001-01-01

Director General Luciano Maiani watches as Romanian President Ion Iliescu signs the CERN guest book. On Friday the 12th of October, Romanian President Ion Iliescu arrived at CERN and was warmly greeted by Director General Luciano Maiani at the steps of building 500. After initial greetings and a general presentation of the laboratory, President Iliescu and his entourage embarked on a whistle stop tour of the CERN facilities. They visited the CMS magnet assembly hall and civil engineering work where presentations were made by CMS spokesperson Michel Della Negra and the ATLAS Tile Calorimeter where the president was introduced to Romanian physicists working here at CERN. Michel Della Negra explains some of the general principles behind CMS to President Iliescu during his visit last week. The Romanian teams working on CERN projects make very visible contributions, for example to the construction of the ATLAS experiment and to the preparation of its eventual scientific exploitation. 'Those of us on the ATLAS ...

EU Commissioner visits CERN

CERN Multimedia

2005-01-01

European Commissioner Viviane Reding in front of one of the computers showing how the Grid works and, from left to right, Robert Aymar, CERN's Director-General, Wolfgang von Rüden, Head of the Information Technology Department, and Bob Jones, the newly appointed director of the EGEE project since 1st November. Viviane Reding, European Commissioner for Information Society and Media, visited CERN on 28 October. Accompanied throughout by CERN's Director-General, Robert Aymar, and the Head of the Information Technology Department, Wolfgang von Rüden, the Commissioner visited the ATLAS cavern before going on to the Information Technology Department, where she was given a complete overview of CERN's activities in the strategic field of Grid computing. Viviane Reding's visit coincided with the end of the EGEE (Enabling Grids for E-sciencE) conference, which took place in Pisa in Italy. Co-ordinated by CERN and funded by the European Commission, the EGEE project aims to set up a worldwide grid infrastructure for sc...

Spaceflight participant visits CERN!

CERN Multimedia

Kathryn Coldham

2016-01-01

On 15 July, CERN welcomed spaceflight participant Anousheh Ansari.   Anousheh Ansari’s grin stretches from ear to ear, during an intriguing conversation with Nobel laureate Samuel C.C. Ting at AMS POCC. (Image: Maximilien Brice/CERN) Iranian-American Anousheh Ansari was the first-ever female spaceflight participant, spending eight days on the International Space Station (ISS) in 2006. She now has a new addition to her list of extraordinary sights ­– the home of the world’s largest particle accelerator: CERN.   On 15 July, Anousheh Ansari came to CERN and, unsurprisingly, visited the control room of the experiment attached to the ISS: the AMS. At the AMS Payload Operations Control Centre (AMS POCC) on CERN’s Prévessin site, she met the Nobel laureate Samuel Ting, spokesperson of the AMS experiment. Ansari and her accompanying guests were thrilled to expand their knowledge about CERN, its research and its...

CERN craftsman named Best in France

CERN Multimedia

Laurent Guiraud

2001-01-01

Didier Lombard, metal worker in EST Division, was crowned 'France's Top Craftsman' during the 21st edition of the contest, which covered the period 1997 to 2000. CERN employs some of Europe's top crafts people to work on construction of components for experiments that are designed to a high degree of precision.

Punctualizaciones del CERN

CERN Multimedia

2002-01-01

"Viene de la pagina anterior. Puntualizaciones del CERN. La valoracion que me merece la aprobacion en el Consejo de Ministros el 24 de mayo de un acuerdo de colaboracion entre el MCYT y el CERN para el proyecto de neutrinos al Gran Sasso es positiva" (1 page).

The CERN PC farm

CERN Multimedia

Serge Bellegarde

2005-01-01

Housed in the CERN Computer Centre, these banks of computers process and store data produced on the CERN systems. When the LHC starts operation in 2008, it will produce enough data every year to fill a stack of CDs 20 km tall. To handle this huge amount of data, CERN has also developed the Grid, allowing the processing power to be shared between computer centres around the world.

CERN meets Facebook

CERN Multimedia

2012-01-01

Social networking sites like LinkedIn, MySpace, Google+ and Facebook are on the rise. In particular, the life of youngsters revolves more and more around these sites as they facilitate communication, networking and the exchange of niceties. Who does not today already have an account registered with one of them? A Facebook profile can contain photos, listings of hobbies, job information, preferences…   The on-going effort to externalise some of CERN's computing resources continues, and in order to promote a unified interface for personal information, CERN has decided to establish a partnership with Facebook starting on 1stApril. "CERN is a public and trustworthy international organisation, and as such, our staff and users have nothing to hide from the general public," said Alexi Spiner (IT), project leader responsible for this migration: * The computer profiles of all CERN users will be integrated into the Facebook portal; * In addition, we will also ...

Safety at CERN

CERN Document Server

2009-01-01

Safety is an integral part of our working lives, and should be in our minds whatever job we do at CERN. Ultimately, safety is the responsibility of the Director General – your safety is my concern. That’s why I have this week appointed a new Safety Policy Committee (SAPOCO) that reflects the new Organizational structure of CERN. CERN’s Staff Rules and Regulations clearly lay out in chapter 3 the scope of safety at CERN as well as my responsibilities and yours in safety matters. At CERN, safety is considered in the broadest sense, encompassing occupational Health and Safety, environmental protection, and the safety of equipment and installations. It is my responsibility to put appropriate measures in place to ensure that these conditions are met. And it is the responsibility of us all to ensure that we are fully conversant with safety provisions applicable in our areas of work and that we comply with them. The appointment of a n...

CERN stationery rejuvenated

CERN Multimedia

Anaïs Schaeffer

2013-01-01

With the introduction of CERN’s new graphic charter, our complete range of official communications stationery has been redesigned. Discover the newly harmonised and standardised range of CERN stationery.   As the Director-General announced in Bulletin 41-42/2012, a new graphic charter is now in force at CERN. The graphics team has taken this opportunity to redesign all the official CERN stationery, such as business cards, correspondence cards, letterheads, envelopes and file holders, all of which will now boast the same, unified format. In keeping with CERN’s new graphic charter, even the business cards have had a makeover: of a better quality than their predecessors, they now elegantly display the CERN colours (namely the familiar Pantone 286 blue). These new cards, which all follow a standardised format, help to project a standardised corporate image of the Organization. Order them online now! As the Director-General highlighted, “it's increasingly imp...

Cern Golf Club

CERN Document Server

Cern Golf Club

2014-01-01

  The Cern Golf Club   Members are here with invited to the: Annual General Meeting which takes place Wednesday evening the 5th February 2014 at 18h00 in the Conference room in bldg 13-2-005. A committee member will be at CERN gate B, 17h50 and accompany “external” CGC members to the conference room. Agenda: 1. President’s report 2. Treasurer’s report 3. Election of the Committee for 2014 4. Election of  Auditors 5. Draft schedule for 2014 CGC-competitions and other events 6. “Corpo” report    7. Proposals and any other business Please forward any proposals (to any of the committee members) you have, including candidature for the 2014 committee minimum three days in advance before the meeting.      Cern Golf Club   Les membres de club de golf de CERN sont invités à l’Assemblée Géné...

CERN openlab Summer Student Programme

CERN Multimedia

2012-01-01

CERN openlab is currently taking applications for its summer student programme. The closing date for applications is 30 March 2012.   The openlab Summer Student Programme is open for applications from bachelor, master and PhD students in computer science and physics. Successful applicants will spend 8 weeks at CERN, during the period June to September 2012, to work with some of the latest hardware and software technologies. The programme is more than just a summer at CERN: it can lead to follow-on projects at the home institute and may even inspire the students to become entrepreneurs in cutting-edge computing technologies. A series of lectures will be given by experts in various domains of CERN related high-throughput computing. Study tours to external companies and universities as well as to CERN facilities are also part of the programme. Please visit www.cern.ch/openlab-students for more information.

CERN openlab summer student programme

CERN Multimedia

2013-01-01

CERN openlab is currently taking applications for its summer student programme. The closing date for applications is 31 March 2013.   The openlab summer student programme is open for applications from bachelor, master and PhD students in computer science and physics. Successful applicants will spend 9 weeks at CERN, during the period from June to September 2013, working with some of the latest hardware and software technologies. The programme is more than just a summer at CERN: it can lead to follow-on projects at the home institute and may even inspire students to become entrepreneurs in cutting-edge computing technologies. A series of lectures will be given by experts in various domains of CERN-related high-throughput computing. Study tours of external companies and universities as well as of CERN facilities are also part of the programme. Please visit the CERN openlab website for more information.

Design education with simulation games

DEFF Research Database (Denmark)

Juuti, Tero; Lehtonen, Timo; Hansen, Poul H. Kyvsgård

2008-01-01

" This paper is a report on the use of simulation games in design education. Our objective was to find solution to the question: "How to do design education effectively and efficiently for hundreds of people with minimum resources?" In the paper the learning theories are described in short. Our...... data was gathered from exams and the results were analysed. Especially the learning of low grade exam students was impressive when using simulation game. The data from industry is based on observations while using simulation game. The results were that each of the workshop, game, and simulation...... elements can support the effort if configured and synchronized properly. The simulation games are valuable method for design education with skillful design, scoping and facilitation."...

CERN HEALTH INSURANCE SCHEME (CHIS)

CERN Multimedia

HR Department

2002-01-01

List of benefits for 2002 The CHIS list of benefits for 2002 is now available from the HR Division Website (under 'general information'). We wish to draw your attention to the fact that the copies of this list available at the CERN UNIQA Office are intended ONLY for CERN pensioners. CERN staff members are therefore kindly requested to print this list themselves from the Web. English version HERE We would like to take this opportunity to remind staff members that they should obtain medical expenses claim forms from their divisional secretariat and NOT from the CERN UNIQA Office, which has a limited supply intended for CERN pensioners ONLY. Human Resources Division Tel: 73635

CERN Technical Training: new courses on computer security

CERN Multimedia

HR Department

2009-01-01

Two new trainings are available at CERN concerning computer security. • How to create secure software? The "Developing secure software" course (3.5 hours) is designed for software programmers, both for regular software and Web applications. It covers main aspects of security in different phases of the software development lifecycle. The last, optional hour discusses security issues of Web application developers. This course, although not hands-on, is interactive and full of real-life examples. The first session of this course will take place, in English, on 21 April in the CERN Technical Training Centre. More sessions will be scheduled in 2009. • How to safely navigate and send mails? The "Secure e-mail and Web browsing" course is an entry-level 1.5-hour course designed to show how to detect and avoid typical security pitfalls encountered when e-mailing and browsing the Web. It is designed for non-technical users of Internet Explorer and Outlook. The first sessions ...

CERN Technical Training: new courses on computer security

CERN Multimedia

HR Department

2009-01-01

Two new trainings are available at CERN concerning computer security. • How to create secure software? The "Developing secure software" course (3.5 hours) is designed for software programmers, both for regular software and Web applications. It covers main aspects of security in different phases of the software development lifecycle. The last, optional hour discusses security issues of Web application developers. This course, although not hands-on, is interactive and full of real-life examples. The first session of this course will take place, in English, on 21 April in the CERN Technical Training Centre. More sessions will be scheduled in 2009. • How to safely navigate and send mails? The "Secure e-mail and Web browsing" course is an entry-level 1.5-hour course designed to show how to detect and avoid typical security pitfalls encountered when e-mailing and browsing the Web. It is designed for non-technical users of Internet Explorer and Outlook. The first sessions o...

CERN: SC-33

International Nuclear Information System (INIS)

Anon.

1991-01-01

On 22 April a forward-looking CERN also looked back for a day, when the 'SC-33' event reviewed the achievements of CERN's first machine, the 600 MeV SynchroCyclotron (SC), which closed down on 17 December after 33 years of valiant service

Simulation study of electron cloud induced instabilities and emittance growth for the CERN Large Hadron Collider proton beam

CERN Document Server

Benedetto, Elena; Schulte, Daniel; Rumolo, Giovanni

2005-01-01

The electron cloud may cause transverse single-bunch instabilities of proton beams such as those in the Large Hadron Collider (LHC) and the CERN Super Proton Synchrotron (SPS). We simulate these instabilities and the consequent emittance growth with the code HEADTAIL, which models the turn-by-turn interaction between the cloud and the beam. Recently some new features were added to the code, in particular, electric conducting boundary conditions at the chamber wall, transverse feedback, and variable beta functions. The sensitivity to several numerical parameters has been studied by varying the number of interaction points between the bunch and the cloud, the phase advance between them, and the number of macroparticles used to represent the protons and the electrons. We present simulation results for both LHC at injection and SPS with LHC-type beam, for different electron-cloud density levels, chromaticities, and bunch intensities. Two regimes with qualitatively different emittance growth are observed: above th...

Follow-up research at CERN

International Nuclear Information System (INIS)

1993-01-01

At The European Center for High Energy Physics (Conseil Europeen de Recherche Nucleaire - CERN) basic research is carried out based on some of the world's largest particle accelerators, especially the Large Electron Positron collider (LEP). Danish membership of CERN gives Danish physicists access to these machines and the Accelerator Committee offers advice on their utilization and related financing. Danish research carried out at CERN is described, based on contributions from individual research groups. The functions, administration and budgets of the Accelerator Committee are explained in addition to other forms of administration connected with CERN, such as the Danish CERN Delegation, and an evaluation of Danish experimentation within physics is presented. Information is given on individual Danish members of the CERN groups of scientists and a list of the publications of international research groups which include Danish subjects, covering the years 1991-93, is presented. The publication is related to the delegation of grants for research projects carried out by Danish physicists. (AB)

CERN openlab enters fifth phase

CERN Multimedia

Andrew Purcell

2015-01-01

CERN openlab is a unique public-private partnership between CERN and leading ICT companies. At the start of this year, openlab officially entered its fifth phase, which will run until the end of 2017. For the first time in its history, it has extended beyond the CERN community to include other major European and international research laboratories.   Founded in 2001 to develop the innovative ICT systems needed to cope with the unprecedented computing challenges of the LHC, CERN openlab unites science and industry at the cutting edge of research and innovation. In a white paper published last year, CERN openlab set out the main ICT challenges it will tackle during its fifth phase, namely data acquisition, computing platforms, data storage architectures, computer management and provisioning, networks and connectivity, and data analytics. As it enters its fifth phase, CERN openlab is expanding to include other research laboratories. "Today, research centres in other disciplines are also st...

LabVIEW Support at CERN

CERN Multimedia

HR Department

2010-01-01

Since the beginning of 2009, due to the CERN restructuring, LabVIEW support moved from the IT to the EN department, joining the Industrial Controls and Electronics Group (ICE). LabVIEW support has been merged with the Measurement, Test and Analysis (MTA) section which, using LabVIEW, has developed most of the measurement systems to qualify the LHC magnets and components over the past 10 years. The post mortem analysis for the LHC hardware commissioning has also been fully implemented using LabVIEW, customised into a framework, called RADE, for CERN needs. The MTA section has started with a proactive approach sharing its tools and experience with the CERN LabVIEW community. Its framework (RADE) for CERN integrated application development has been made available to the users. Courses on RADE have been integrated into the standard National Instruments training program at CERN. RADE and LabVIEW support were merged together in 2010 on a single email address:labview.support@cern.ch For more information please...

High energy density physics effects predicted in simulations of the CERN HiRadMat beam-target interaction experiments

Science.gov (United States)

Tahir, N. A.; Burkart, F.; Schmidt, R.; Shutov, A.; Wollmann, D.; Piriz, A. R.

2016-12-01

Experiments have been done at the CERN HiRadMat (High Radiation to Materials) facility in which large cylindrical copper targets were irradiated with 440 GeV proton beam generated by the Super Proton Synchrotron (SPS). The primary purpose of these experiments was to confirm the existence of hydrodynamic tunneling of ultra-relativistic protons and their hadronic shower in solid materials, that was predicted by previous numerical simulations. The experimental measurements have shown very good agreement with the simulation results. This provides confidence in our simulations of the interaction of the 7 TeV LHC (Large Hadron Collider) protons and the 50 TeV Future Circular Collider (FCC) protons with solid materials, respectively. This work is important from the machine protection point of view. The numerical simulations have also shown that in the HiRadMat experiments, a significant part of thetarget material is be converted into different phases of High Energy Density (HED) matter, including two-phase solid-liquid mixture, expanded as well as compressed hot liquid phases, two-phase liquid-gas mixture and gaseous state. The HiRadMat facility is therefore a unique ion beam facility worldwide that is currently available for studying the thermophysical properties of HED matter. In the present paper we discuss the numerical simulation results and present a comparison with the experimental measurements.

CERN's IT Consultancy Team: a new IT project support service

CERN Multimedia

Ignacio Reguero, IT Department

2016-01-01

Newly created IT Consultancy Team provides advice on IT matters to communities at CERN starting new projects or reviewing computing activities of old.   The members of CERN's IT Consultancy Team. The consultants share their knowledge and experience to improve awareness of the IT landscape at CERN and to advise on system architecture and design to ensure best usage of existing IT services and solutions that favour, and are compatible with, the infrastructure already in place. They also help to formalise requirements and assess impact on security, software licenses and cost, especially where contacts among different services are needed and questions go beyond the current computing service offerings. For instance, the IT consultants may help answering questions like the ones below: We are starting with project X – how could we make its computing aspects compatible with the CERN IT infrastructure? E.g. if you need a web content management system favour Drupal instead of Wor...

CERN firefighters have got your back covered

CERN Multimedia

The Fire Brigade

2011-01-01

There’s not much room in the centre of a detector. Ensuring the safety of technicians who have to work on components close to the collision point is an absolute priority. With this firmly in mind, the Fire Brigade has recently acquired a back immobilisation device known as a spine splint.   CERN firefighters show off their new spine splint. Conscious of the potential safety hazards for personnel working on ALICE’s inner detectors, the collaboration’s GLIMOS, Fernando Pedrosa, asked the Fire Brigade to organise an exercise in March to simulate the emergency evacuation of a person from the centre of the detector. Despite the exceptionally limited space available in the centre of ALICE, the Fire Brigade successfully met the challenge. However, although specially designed for emergency evacuations, the cumbersome dimensions of the stretcher used in this first exercise caused many problems.   Following the exercise, the Fire Brigade therefore inves...

Two pioneering artists visit CERN

CERN Multimedia

CERN Bulletin

2015-01-01

On Monday, 19 January, CERN physicists welcomed musician Tim Blake - progressive rock keyboard and theremin player - and architectural lighting designer Patrice Warrener - inventor of the Chromolithe Polychromatic Illumination system, used in Lyon’s “Fête des Lumières”. Together, they make up the musical duo "Crystal Machine".   The artists visit the Antiproton Decelerator. (Image: Django Manglunki.)   Their visit began with an introduction to CERN by their friend Django Manglunki, project leader for the ion injector chain, and an improvised discussion on the LHC extraction system with Roger Barlow, kicker magnet controls expert and progressive rock fan. This was followed by a quick trip to the CCC, the server room and the SPS RF amplifiers in BA3. Next on the itinerary was a tour of the AD and anti-hydrogen experiments led by Michael Doser, AEgIS Spokesperson. A leisurely lunch followed, in the company ...

Open Compute Project at CERN

CERN Multimedia

CERN. Geneva

2014-01-01

The Open Compute Project, OCP ( http://www.opencompute.org/), was launched by Facebook in 2011 with the objective of building efficient computing infrastructures at lowest possible cost. The technologies are released as open hardware design, with the goal to develop servers and data centers following the model traditionally associated with open source software projects. We have been following the OCP project for some time and decided to buy two OCP twin servers in 2013 to get some hands-on experience. The servers have been tested and compared with our standard hardware regularly acquired through large tenders. In this presentation we will give some relevant results from this testing and also discuss some of the more important differences that can matter for a larger deployment at CERN. Finally it will outline the details for a possible project for a larger deployment of OCP hardware for production use at CERN.

CERN/KEK: Very high accelerating gradients

Energy Technology Data Exchange (ETDEWEB)

Anon.

1993-01-15

Full text: A world-wide effort is under way to develop linear electron-positron colliders so that physics experiments can be extended into a range of energies where circular machines (necessarily much larger than CERN's 27-kilometre LEP machine) would be crippled by synchrotron radiation. CERN is studying the feasibility of building a 2 TeV machine called CLIC powered not by individual klystrons, but by a high intensity electron 'drive' linac running parallel to the main linac (November 1990, page 7). This drive linac will itself be powered by similar superconducting cavities to those developed for LEP. A high gradient is an obvious design aim for any future high energy linear collider because it makes it shorter and therefore cheaper - the design figure for the CLIC machine is 80 MV/m. The CLIC study group has taken a significant step forward in demonstrating the technical feasibility of their machine by achieving peak and average accelerating gradients of 137 MV/m and 84 MV/m respectively in a short section of accelerating structure during high gradient tests at the Japanese KEK Laboratory last year. This result obtained within the framework of a CERN/KEK collaboration on linear colliders was obtained using a 20-cell accelerating section built at CERN using state-of the- art technology which served both as a model for CLIC studies as well as a prototype for the Japanese Linear Collider studies. The operating frequency of the model accelerating section is 2.6 times lower than the CLIC frequency but was chosen because a high power r.f. source and pulse compression scheme has been developed for this frequency at KEK. Testing CLIC models at 11.4 GHz is however more stringent than at 30 GHz because the chance of electrical breakdown increases as the frequency is lowered. This recent result clearly demonstrates that a gradient of 80 MV/m is feasible.

CERN/KEK: Very high accelerating gradients

International Nuclear Information System (INIS)

Anon.

1993-01-01

Full text: A world-wide effort is under way to develop linear electron-positron colliders so that physics experiments can be extended into a range of energies where circular machines (necessarily much larger than CERN's 27-kilometre LEP machine) would be crippled by synchrotron radiation. CERN is studying the feasibility of building a 2 TeV machine called CLIC powered not by individual klystrons, but by a high intensity electron 'drive' linac running parallel to the main linac (November 1990, page 7). This drive linac will itself be powered by similar superconducting cavities to those developed for LEP. A high gradient is an obvious design aim for any future high energy linear collider because it makes it shorter and therefore cheaper - the design figure for the CLIC machine is 80 MV/m. The CLIC study group has taken a significant step forward in demonstrating the technical feasibility of their machine by achieving peak and average accelerating gradients of 137 MV/m and 84 MV/m respectively in a short section of accelerating structure during high gradient tests at the Japanese KEK Laboratory last year. This result obtained within the framework of a CERN/KEK collaboration on linear colliders was obtained using a 20-cell accelerating section built at CERN using state-of the- art technology which served both as a model for CLIC studies as well as a prototype for the Japanese Linear Collider studies. The operating frequency of the model accelerating section is 2.6 times lower than the CLIC frequency but was chosen because a high power r.f. source and pulse compression scheme has been developed for this frequency at KEK. Testing CLIC models at 11.4 GHz is however more stringent than at 30 GHz because the chance of electrical breakdown increases as the frequency is lowered. This recent result clearly demonstrates that a gradient of 80 MV/m is feasible

CERN gives a hand to Telethon

CERN Multimedia

2000-01-01

Let's go for 30 hours of non-stop events with Telethon 2000! Telethon is a televised event across France, which has taken place every year for the last 10 years. Its aim is to raise money for research into genetically transmitted diseases. This year it will be held in four cities and one of them is Divonne-le-Bains. The Spa town, which has chosen the theme of 'Internationality', is expecting over 40 000 visitors! Many spectacular attractions are planned. Among them, 200 children between the ages of 8 and 14 of all nationalities will gather in a parade on 8 December. They will wear their national costumes and carry national flags. Non-stop sports, cultural, musical, and gastronomical events will add to the fun part of Telethon. French craftsmen will offer for sale pieces of a huge wooden globe built by them, and a grand drawing competition will test children's talent to design a flag for the world. CERN is involved in the event by designing a webpage that will be accessible through CERN's main website. On thi...

Validation of Quench Simulation and Simulation of the TWIN Solenoid

CERN Document Server

Pots, Rosalinde Hendrika

2015-01-01

For the Future Circular Collider at CERN a multi-purpose detector is proposed. The 6T TWIN Solenoid, a very large magnet system with a stored energy of 53 GJ, is being designed. It is important to protect the magnet against quenches in the system. Therefore several existing quench protection systems are evaluated and simulations have be performed on quenches in the TWIN Solenoid. The simulations on quenches in the TWIN Solenoid have been performed with promising results; the hotspot temperatures do not exceed 120 K and layer to layer voltages stay below 500 V. Adding quench heaters to the system might improve the quench protection system further.

CERN's technical apprentices during their apprenticeships

CERN Multimedia

Adrian Billet

2004-01-01

CERN starting training apprentices in 1966 at the request of the Geneva authorities. The programme was consolidated with the opening of the training centre in 1971. In recent years CERN has taken on seven new technical apprentices each year (four in electronics, three in physics laboratory work), plus one or two administrative apprentices, such that there always are around 30 apprentices in total at CERN. The programme is highly regarded in Geneva by the authorities, industry, schools and young people, and contributes very positively to CERN's local image. Since the beginning 160 young people have now successfully completed their apprenticeships at CERN. Unlike some other employers, as a general rule CERN does not take on its ex-apprentices as staff; on completing their years at CERN the apprentices usually go on to higher education or are sought after by other employers.

Environmental radiation monitoring on the CERN sites and in the CERN environment during 1998

Energy Technology Data Exchange (ETDEWEB)

Vojtyla, P; Wittekind, D

1999-04-15

As a consequence of changes in the administrative structure of TIS Division in 1996 and 1997, the Environmental Section was integrated into the TIS Technical Services and Environment Group that also looks after the non-radiation parameters in the CERN releases and environment. However, it remains the duty of the Radiation Protection Group (RP) to define the environmental programme for radiation and radioactivity, and of the leader of RP to report its results both inside and outside CERN. Part I of this Annual Report describes the results of measurements which are relevant for assessing the radiological impact of CERN's activities on the environment and the population living in the vicinity of the CERN sites. Measurements of radioactivity released into the atmosphere and into water, as well as measurements of stray radiation at or near the CERN site boundaries, are reported.

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You can find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours CERN EDMS – Introduction\t(English)\t10.02\t1 day CERN EDMS – Introduction\t(Français)\t11.02\t1 jour Windows Vista\t(Français)\t24.02\t3 heures ½ EXCEL 2007 – Level 2: ECDL\t(Français)\t26-27.02\t2 jours Indico – Meeting Organisation\t(Français)\t02.03\t2 heures Indico – Conference Organisation\t(English)\t02.03\t3 hours Excel 2007 – Level 1: ECDL\t(Français)\t03-04.03\t2 jours CERN EDMS for Local Administrators\t(English)\t04-05.03\t2 days Novelties Office 2007: Word 2007\t(Français)\t09.03\t1 jour Sharepoint Designer (Frontpage) – Level 2\t(English)\t18-19.03\t2 days Access 2007 – Level 2: ECDL\t(Français)\t30-31.03\t2 jours SOFTWARE AND SYSTEM TECHNOLOGIES Oracle 10 g Certified Prof...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Sharepoint Collaboration Worskpace\t(Français) 07-08.04\t2 jours CERN EDMS MTF in practice (English)\t09.04\t0.5 day Word 2007 : Niveau 1 ECDL (Français) 10-11.04\t2 jours Indico - Meeting Organization\t(Français)\t18.04\t1 day Indico – Conference Organization\t(Français)\t18.04\t1 day Word 2007: Niveau 2 ECDL\t(Français)\t28-29.04\t2 jours Excel 2007 – Niveau 2 ECDL (Français)\t05-06.05\t2 jours In Design: Introduction (Français)\t13-14.05\t2 jours Sharepoint Collaboration Worskpace\t(English)\t19-20.05\t2 days Sharepoint Designer (Frontpage) – Level 1 ECDL\t(English)\t29-30.05\t2 days SOFTWARE AND SYSTEM TECHNOLOGIES C++ Programming Part 1 – Java 2 Enterprise Edition: Part 2 Enterprise JavaBeans (English)\t14-16.04 3 days Oracle SQL (En...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the 2008 CERN Technical Training Programme and places are still available. You will find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Access 2007 – Niveau 2: ECDL\t(Français)\t01-04.07\t4 ½ journées Windows Vista\t(Français)\t11.07\t½ journée SOFTWARE AND SYSTEM TECHNOLOGIES Oracle 10g Certified Professional\t(English)\t30.06-04.07\t5 days Advanced Python-Hands-on\t(English)\t07-09.07\t3 days Hands-On Design Patterns for Object-oriented Programming (English)\t02-04.07\t3 days MECHANICAL DESIGN ANSYS CFX\t(Français)\t28-31.07\t4 jours If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at: http://cta.cern.ch/cta2/f?p=110:9 under ‘Technical Training’ with the detailed course program. Registration for all courses is alw...

H$^{-}$ ion source for CERN's Linac4 accelerator: simulation, experimental validation and optimization of the hydrogen plasma

CERN Document Server

Mattei, Stefano; Lettry, Jacques

2017-07-25

Linac4 is the new negative hydrogen ion (H$^-$) linear accelerator of the European Organization for Nuclear Research (CERN). Its ion source operates on the principle of Radio-Frequency Inductively Coupled Plasma (RF-ICP) and it is required to provide 50~mA of H$^-$ beam in pulses of 600~$\\mu$s with a repetition rate up to 2 Hz and within an RMS emittance of 0.25~$\\pi$~mm~mrad in order to fullfil the requirements of the accelerator. This thesis is dedicated to the characterization of the hydrogen plasma in the Linac4 H$^-$ ion source. We have developed a Particle-In-Cell Monte Carlo Collision (PIC-MCC) code to simulate the RF-ICP heating mechanism and performed measurements to benchmark the fraction of the simulation outputs that can be experimentally accessed. The code solves self-consistently the interaction between the electromagnetic field generated by the RF coil and the resulting plasma response, including a kinetic description of charged and neutral species. A fully-implicit implementation allowed to si...

CERN'S Fire and Rescue Group Gets New Ambulance

CERN Multimedia

2000-01-01

The ambulance is to replace another based on the off-road vehicle design which was originally acquired for the civil engineering phase of LEP construction. Just one figure, in 1999, the CERN ambulance was called out 195 times.

CERN Public homepage takes its first step towards web 2.0

CERN Multimedia

2009-01-01

Some of you may have noticed a change of format on the CERN public homepage recently. The Bulletin catches up with Dan Noyes, CERN web content manager, to find out what is happening. With over 7000 websites in the cern.ch domain, CERN’s web landscape is a challenging one to manage. Dan Noyes, who joined CERN a year ago, is the web content manager within the Communication group, which is mandated to develop the public and user websites as well as developing standards and guidelines for the wider CERN web. The recent changes made to the public homepage were the first small step towards some quite major changes proposed for CERN’s websites over the next couple of years. Currently, one of the problems of CERN’s websites is that the quantity and the diversity of the information in them make them difficult to manage, if one wants to avoid duplication and to keep information updated and easy to find. This is also aggravated by the lack of a standard design philosophy a...

CERN Technical Training: Open Courses (July 2007)

CERN Multimedia

2007-01-01

The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007: Automate de Sécurité (French): -> POSTPONED > from 9 to 11 October 2007 ! 10.7.-12.7.2007 (3 days, full) JCOP - Joint PVSS - JCOP Framework 09.07-12.07.2007 (5 days, full) CERN - EDMS - Introduction 10.07.2007 (1 day, 5 places available) Oracle - HTML DB 2.0: Develop Web Applications (English): 11.7.-13.7.2007 (3 days, 5 places available) Technique du vide (French): 11.7.-12.7.2007 (2 days, full) ANSYS - Classical (French) 16.7.-20.7.2007 (5 days, 2 places available) CERN - EDMS - MTF en pratique 17.07.2007 (1 day, 7 places available) Oracle - Programming with PL/SQL (English): 17.7.-19.7.2007 (3 days, 1 place available) WORD 2007 - Niveau 1 ECDL 24.7.-25.7.2007 (2 days, 8 places available) Introduction to Databases and Database Design (English) 24.7.-25.7.2007 (2 days, 3 places available) Technique du vide (French): 24.7.-25.7.2007 (2 days, 6 place...

Brand-new signage for the CERN shuttles

CERN Multimedia

Roberto Cantoni

2010-01-01

If, after reading the title of this article, you're striving to remember what the signs for the CERN shuttles look like, then you just hit the nail on the head: we bet that only a few people can actually do so. In order to make it easier for CERN users to move around the CERN sites, a graphic restyling of the shuttle signage has been implemented. You will start to see the new timetables in the coming days.   Larisa Kuchina, a graphic designer in the Communication Group, restyled the shuttle signage to make it more visible and intelligible. “I was inspired by the very clear and user friendly interface of the Geneva Public Transport system (TPG)”, explains Larisa. “Each timetable will also include the corresponding shuttle route. We will soon introduce new road signs for shuttle stops to make sure they are visible from a distance”. There are currently four shuttle lines, serving 28,000 passengers since February 2010: two of them operate between Meyrin and Pr...

CERN Library | Mario Campanelli presents "Inside CERN's Large Hadron Collider" | 16 March

CERN Multimedia

CERN Library

2016-01-01

"Inside CERN's Large Hadron Collider" by Mario Campanelli. Presentation on Wednesday, 16 March at 4 p.m. in the Library (bldg 52-1-052) The book aims to explain the historical development of particle physics, with special emphasis on CERN and collider physics. It describes in detail the LHC accelerator and its detectors, describing the science involved as well as the sociology of big collaborations, culminating with the discovery of the Higgs boson.  Inside CERN's Large Hadron Collider  Mario Campanelli World Scientific Publishing, 2015  ISBN 9789814656641​

Development of 18 K helium refrigeration system for CERN

CERN Document Server

CERN. Geneva

2004-01-01

The Conseil Europeen pour Ia Recherche Nucleaire (CERN) placed an order for a 1.8 K helium refrigeration system with IHI for the Large Hadron Collider project in 1999. IHI formed a consortium with Linde Kryotechnik AG (Switzerland), which has long experience with helium refrigeration systems. IHI designed and manufactured cold compressors based on leading technologies and expertise for turbo machinery. The cold compressor has the highest efficiency in the world. This paper describes the 1.8 K helium refrigeration system and performance test results at CERN. (5 refs).

Quantification of CERN's economic spin-off

International Nuclear Information System (INIS)

Bianchi-Streit, M.; Blackburne, N.; Budde, R.; Reitz, H.; Sagnell, B.; Schorr, B.; Schmied, H.

1986-01-01

A condensed version is given of CERN report ''Economic utility resulting from CERN contracts'' by the same authors, which attempts to quantify the economic benefit to high technology manufacturing industries involved in CERN contracts, in relation to their sales to CERN. It covers the period 1973 to 1987 and complements an earlier study made in 1973-1975. Interviews were carried out in 166 European firms of which the majority supplied estimates of increased sales and cost savings due to CERN contracts. This ''economic utility'' totals 3107 million Swiss francs (up to the year 1987) compared to sales to CERN in 1973 to 1982 amounting to 748 million Swiss francs in 1982 prices. It is estimated that, by 1987, CERN's high technology purchases made in 1973 to 1982 will have generated economic utility amounting to about 60% of the overall cost of the organization during the same period. (author)

CERN Video News on line

CERN Multimedia

2003-01-01

The latest CERN video news is on line. In this issue : an interview with the Director General and reports on the new home for the DELPHI barrel and the CERN firemen's spectacular training programme. There's also a vintage video news clip from 1954. See: www.cern.ch/video or Bulletin web page

Women at CERN

CERN Multimedia

2004-01-01

To mark International Women's Day on 8 March, the Weekly Bulletin has looked at the careers of six female physicists, engineers and administrators working at CERN. A frequent question on the lips of newcomers to CERN as they take a quick look around them is 'But where are the women?' However, while it's true that the Laboratory has never had a huge number of female personnel, a closer look reveals that there are in fact quite a few around. To mark International Women's Day, the Bulletin has interviewed six women working at CERN to find out how they see the Organization, what they do and what they think about their daily working lives. Creating a link 'Maybe because I grew up during World War II, my parents always taught me to respect people of other nationalities, religions, colour, etc., so one thing I have always appreciated about CERN is that it promotes this tolerance and understanding by giving us the great privilege of working side by side with colleagues from many cultures and walks of life.' Pegg...

CERN's Guardian Angels

CERN Multimedia

2002-01-01

Any trouble at CERN? The Technical Control Room operates the entire technical infrastructure of CERN every day, all year long. They deal with problems that go from simple water leaks to devastating power cuts.   The Technical Control Room with Kenneth Olesen and Mark Harvey, minutes before their starting time. This big room is probably the liveliest at CERN, since there's always someone there, everyday, all year long. Laurent Randot and Eric Lienard working in the Technical Control Room at CERN in building 212. They've started at 7 a.m. and today has been a relatively quiet day. There have been some microcuts in the electric net because of the wind. But these have been repaired rather quickly... The relief: It's 2.30 p.m. Time for Laurent Randot and Eric Lienard to show their colleagues Mark Harvey and Kenneth Olesen what has been going on during the morning. They are the next TCR team of the day. Mark Harvey and Kenneth Olesen start their working day. They will work until 11p.m., when another team wil...

CERN Cricket Club

CERN Multimedia

Staff Association

2014-01-01

CERN CRICKET CLUB   The CERN Cricket Club 2014 season has been a good one so far with the team qualifying for the Swiss Cup semi-finals, with home advantage on the Prevessin ground on Sunday, August 24th. Their opponents will only be known the day before when the final game in the Eastern Division is played.  The CERN ground hasn’t quite recovered from the Bosons&More party last year, the wet weather making it impossible to roll the ground, but the new, wider strip is a big improvement. Net practice eventually started in late July, which is probably why the results at the beginning of the season weren’t so good. As match reports are too long to be included in the weekly bulletin, the full reports and the schedule can be found under “Matches (Fixtures, results, reports)” on the Cricket Club web site at http://cern.ch/Club-Cricket/    Anyone interested in playing cricket is welcome to join us at net practice, which takes pla...

CERN Women's club

CERN Multimedia

CERN Women's club

2010-01-01

The Welcome Center The Welcome Center website for CERN newcomers – and everyone else at CERN – has celebrated its first anniversary in operation. It began as a project to organize all the various information available at CERN into an easy to use site, with advice to help you make the most of your time here. It continues to be updated as new information becomes available. Lori Hakulinen and her helpers offer to meet with anyone who has questions. They can advise you on weekend activities, local restaurants and where to buy hard to find items or some of your favorite things from home, in addition to all of the practicalities you need to know, such as how to find housing or have a telephone installed, where to take language classes and much, much more. It’s all listed at: http://cern.ch/club-cwc-newcomers In general, meetings take place the first and third Thursdays in the month at Restaurant No. 1 in the Children’s Dining Room. (Please consult the Homepage for schedu...

The Summer Student Webfest is back at CERN!

CERN Multimedia

Sharada Mohanty

2014-01-01

The CERN Summer Student Webfest is an annual hackathon at CERN, in which a group of bright and creative minds meet over a weekend to build cool science projects using Open Web technologies. It’s happening soon. Be there!   At the previous two Webfests, participants built applications ranging from 3D games about particle physics to cheap mobile-phone-enabled cosmic ray detectors. And yes, they built them, or at least working prototypes, over just one weekend! Participants in the Webfest work in small teams, each on specific ideas, to design neat Web applications that encourage the public to learn more about science and in particular about CERN, the LHC and physics. This year, we’re also encouraging summer students to explore humanitarian projects that involve Web-based solutions, together with CERN’s partner UNOSAT. If you have a great idea for a project, or you want to team up with other students and use or further develop your Web skills, this is your opportunity t...

A Princess at CERN

CERN Multimedia

2009-01-01

On 16 March HRH Princess Maha Chakri Sirindhorn of Thailand visited CERN for the third time. After meeting the Director-General, she toured the CMS experimental area and LHC tunnel with Coordinator for external relations Felicitas Pauss and CMS Spokesperson Jim Virdee. During her visit she took a particular interest in CERN’s education programme. From left to right, Emmanuel Tsesmelis, from the CERN Directorate’s office, Jim Virdee, CMS Spokesperson, the Princess of Thailand and Felicitas Pauss, CERN Coordinator for external relations.

Top-level DB design for Big Data in ATLAS Experiment at CERN

CERN Document Server

Dimitrov, Gancho; The ATLAS collaboration

2017-01-01

This presentation describes a system that accumulates a set of key quantities for a very large number of particle collision events recorded by the ATLAS experiment at the LHC (Large Hadron Collider) at CERN. The main project requirements are the handling of tens of billions of rows per year with minimal DB resources, and providing outstanding performance for the fundamental use cases. Various challenges were faced in the process of project development, such as large data volume, large transactions (tens to hundreds of million of rows per transaction) requiring significant amount of undo, row duplication checks, adequate table statistics gathering, and SQL execution plan stability. Currently the system hosts about 120 billion rows as the data ingestion rate has gone beyond the initially foreseen 30 billion rows per year. The crucial DB schema design decisions and the Oracle DB features and techniques will be shared with the audience. By attending this session you will learn how big physics data can be organize...

The Evolution of CERN EDMS

Science.gov (United States)

Wardzinska, Aleksandra; Petit, Stephan; Bray, Rachel; Delamare, Christophe; Garcia Arza, Griselda; Krastev, Tsvetelin; Pater, Krzysztof; Suwalska, Anna; Widegren, David

2015-12-01

Large-scale long-term projects such as the LHC require the ability to store, manage, organize and distribute large amounts of engineering information, covering a wide spectrum of fields. This information is a living material, evolving in time, following specific lifecycles. It has to reach the next generations of engineers so they understand how their predecessors designed, crafted, operated and maintained the most complex machines ever built. This is the role of CERN EDMS. The Engineering and Equipment Data Management Service has served the High Energy Physics Community for over 15 years. It is CERN's official PLM (Product Lifecycle Management), supporting engineering communities in their collaborations inside and outside the laboratory. EDMS is integrated with the CAD (Computer-aided Design) and CMMS (Computerized Maintenance Management) systems used at CERN providing tools for engineers who work in different domains and who are not PLM specialists. Over the years, human collaborations and machines grew in size and complexity. So did EDMS: it is currently home to more than 2 million files and documents, and has over 6 thousand active users. In April 2014 we released a new major version of EDMS, featuring a complete makeover of the web interface, improved responsiveness and enhanced functionality. Following the results of user surveys and building upon feedback received from key users group, we brought what we think is a system that is more attractive and makes it easy to perform complex tasks. In this paper we will describe the main functions and the architecture of EDMS. We will discuss the available integration options, which enable further evolution and automation of engineering data management. We will also present our plans for the future development of EDMS.

Cern Cricket Club

CERN Multimedia

Cern Cricket Club

2014-01-01

  Cern Cricket Club The CERN Cricket Club 2014 season has started earlier than usual, with a game scheduled for the first time ever on Easter Sunday.  Due to repair work for the damage done to the ground because of the “Bosons&More” party at the end of September, all games until June have had to be scheduled away. Net practice, which normally takes place on the ground from mid-April, will not start until mid-June. The club is always looking for new players and newcomers will be made very welcome. Anyone who is interested in joining the club should sign up on our web site: http://cern.ch/Club-Cricket/    

CHOEUR DU CERN

CERN Multimedia

CHOEUR DU CERN

2010-01-01

Les répétitions du chœur du CERN reprendront le mercredi 15 septembre à 20.00 heures à l’amphithéâtre principal – bâtiment 500. Au programme la préparation de notre concert de Noël avec la Missa Brevis, KV115, de Léopold Mozart et de la musique de Noël d’Europe. Les personnes qui aiment chanter, notamment des sopranes et des ténors, sont les bienvenues. Pour tout contact s’adresser à : Baudouin Bleus - (tél.CERN 767 82 44) -(baudouin.bleus@cern.ch) ou Martin Gatehouse ( martin.gatehouse@wanadoo.fr) ou Jean-Paul Diss (jean-pauldiss@wanadoo.fr).  

CERN Croquet club

CERN Multimedia

CERN Croquet Club

2018-01-01

The CERN Croquet Club warmly invites you to an “Open Day” at the CERN Croquet Club on Sunday afternoon, 1st July as of 14:00 We will show you how to play the different games and you can try them out yourselves. Croquet of course, but also the Japanese version, called Gateball, as well as Lawn Bowls, what one might call the British version of “Boules”. The Swiss Croquet Association will offer afternoon Tea and Cake For catering purposes, it would be nice if you can let us know in advance if you will be joining us. Friends and family ae welcome but they will require a CERN Access card. Hope to see you there.

“Hangout” with CERN this Thursday

CERN Multimedia

2012-01-01

Starting Thursday 1 November at 5 pm CET, CERN is launching a new weekly “Hangout with CERN” that will be broadcast live on Google+ and YouTube.   The first hangout will welcome virtual visitors to CERN. Over the coming weeks the CERN hangouts will be taking you around CERN, on visits experimental sites and to speak with physicists, engineers and more. But most importantly, they will be opportunities to answer your questions. You can post your questions in advance, either in the comment section on facebook or on Twitter to @CERN with the hashtag #askCERN. The best questions will be answered during the hangout, and participants may be invited to participate live! Find out more here.  

FLUKA Monte Carlo simulations and benchmark measurements for the LHC beam loss monitors

International Nuclear Information System (INIS)

Sarchiapone, L.; Brugger, M.; Dehning, B.; Kramer, D.; Stockner, M.; Vlachoudis, V.

2007-01-01

One of the crucial elements in terms of machine protection for CERN's Large Hadron Collider (LHC) is its beam loss monitoring (BLM) system. On-line loss measurements must prevent the superconducting magnets from quenching and protect the machine components from damages due to unforeseen critical beam losses. In order to ensure the BLM's design quality, in the final design phase of the LHC detailed FLUKA Monte Carlo simulations were performed for the betatron collimation insertion. In addition, benchmark measurements were carried out with LHC type BLMs installed at the CERN-EU high-energy Reference Field facility (CERF). This paper presents results of FLUKA calculations performed for BLMs installed in the collimation region, compares the results of the CERF measurement with FLUKA simulations and evaluates related uncertainties. This, together with the fact that the CERF source spectra at the respective BLM locations are comparable with those at the LHC, allows assessing the sensitivity of the performed LHC design studies

FLUKA Monte Carlo simulations and benchmark measurements for the LHC beam loss monitors

Science.gov (United States)

Sarchiapone, L.; Brugger, M.; Dehning, B.; Kramer, D.; Stockner, M.; Vlachoudis, V.

2007-10-01

One of the crucial elements in terms of machine protection for CERN's Large Hadron Collider (LHC) is its beam loss monitoring (BLM) system. On-line loss measurements must prevent the superconducting magnets from quenching and protect the machine components from damages due to unforeseen critical beam losses. In order to ensure the BLM's design quality, in the final design phase of the LHC detailed FLUKA Monte Carlo simulations were performed for the betatron collimation insertion. In addition, benchmark measurements were carried out with LHC type BLMs installed at the CERN-EU high-energy Reference Field facility (CERF). This paper presents results of FLUKA calculations performed for BLMs installed in the collimation region, compares the results of the CERF measurement with FLUKA simulations and evaluates related uncertainties. This, together with the fact that the CERF source spectra at the respective BLM locations are comparable with those at the LHC, allows assessing the sensitivity of the performed LHC design studies.

A vintage celebration for CERN

CERN Multimedia

2004-01-01

Maurice Dupraz, a winegrower from the Etat de Genève vineyards, explains the characteristics of the Vigne des Nations to Robert Aymar, CERN's Director-General, and Robert Cramer, Conseiller d'Etat. As part of the fiftieth anniversary celebrations, CERN was the guest of honour at the Vigne des Nations ceremony organised by the Etat de Genève on 7 May. My Organization is greatly honoured to have the Vigne des Nations dedicated to it, said Robert Aymar, CERN's Director-General, at the ceremony held on the slopes of the Lully vineyards at Bernex on 7 May. Invited by Robert Cramer, President of Geneva's Conseil d'Etat, he spoke of the special links that have been forged over the last fifty years between CERN and the Canton of Geneva, where the Organization has its headquarters. Both of them paid tribute to Maurice Bourquin, former rector of the University of Geneva and Swiss delegate to the CERN Council since 1994, who became the first Swiss President of the CERN Council in 2000. The Vigne des Nations ceremony,...

Medals for CERN spin-offs

CERN Multimedia

2007-01-01

Nine companies whose inventions make use of technologies developed at CERN were honoured at the 35th Salon des Inventions, held in Geneva from 18-22 April. CERN was the Salon's guest of honour. The CERN 'table' at the 35th Salon des Inventions. This year's Salon included 1000 exhibitions brought by 775 exhibitors from 45 countries. Those with misgivings about the value of particle physics should take a look at the list of prize winners from the 35th Salon des Inventions, held in Geneva from 18-22 April. Nine of the winning inventions were spin-offs from technologies developed at CERN. CERN's research and development strategy includes a programme where technologies developed at and for the Laboratory are jointly developed with industries, so that they may be adapted into a commercial product for other uses. These include many different domains of applications such as medical imaging and IT. The following companies won awards at the Salon for inventions from CERN-developed technologies: PANalytical won a g...

Beam Transfer Line Design for a Plasma Wakefield Acceleration Experiment (AWAKE) at the CERN SPS

CERN Document Server

Bracco, C; Brethoux, D; Clerc, V; Goddard, B; Gschwendtner, E; Jensen, L K; Kosmicki, A; Le Godec, G; Meddahi, M; Muggli, P; Mutin, C; Osborne, O; Papastergiou, K; Pardons, A; Velotti, F M; Vincke, H

2013-01-01

The world’s first proton driven plasma wakefield acceleration experiment (AWAKE) is presently being studied at CERN. The experimentwill use a high energy proton beam extracted from the SPS as driver. Two possible locations for installing the AWAKE facility were considered: the West Area and the CNGS beam line. The previous transfer line from the SPS to the West Area was completely dismantled in 2005 and would need to be fully re-designed and re-built. For this option, geometric constraints for radiation protection reasons would limit the maximum proton beam energy to 300 GeV. The existing CNGS line could be used by applying only minor changes to the lattice for the final focusing and the interface between the proton beam and the laser, required for plasma ionisation and bunch-modulation seeding. The beam line design studies performed for the two options are presented.

CERN safety reaches out to medicine

CERN Document Server

2001-01-01

What do CERN and other scientific organizations like ESA and ESO have in common with neurosurgery and airlines? At first sight, not much. But all require sound safety management. CERN's expertise in this field was recently highlighted when two CERN engineers were invited to talk at an international conference on Quality Management and Risk Control in Neurosurgery.CERN has long been recognised as a centre of excellence in physics, and its spin-offs in fields such as medicine have been widely hailed. But increasingly, the Laboratory's expertise in the management of large international collaborations is also being recognised. Contacts between CERN and organizations like ESA and ESO, as well as with industry, bear witness to this fact. One recent example comes from Airbus Industrie, which organized a meeting in 1998 with CERN to compare notes on project management, safety, and quality assurance. Safety management is a recognised speciality in the field of project management and at CERN, TIS and the safety offici...

Iranian and Kazakh representatives visit CERN

CERN Multimedia

2004-01-01

On 1st and 4th March respectively, CERN received visits from Asset Issekeshev, Kazakhstan's Vice-Minister of Industry and Trade, and Reza Mansouri, Deputy Minister for Science, Research and Technology of the Islamic Republic of Iran. Asset Issekeshev and his delegation came to CERN with the aim of learning "the European way of building strong and effective ties between science and the industrial sector". Welcomed by Maximilian Metzger, CERN's Secretary-General, he visited the ATLAS assembly hall and the CLIC installations before signing the visitors' book. After a short visit to Point 5 (CMS), Reza Mansouri met CERN's Director-General, Robert Aymar, before talking to Iranian PhD students working on their theses at CERN. Asset Issekeshev, Kazakhstan's Vice-Minister of Industry and Trade, signs the visitors' book, watched by Maximilian Metzger, CERN's Secretary-General.From left to right: Mojtaba Mohammadi and Majid Hashemi (Iranian PhD students at CERN); Dr Daniel Denegri (CMS), Professor Re...

Member State Event: Telling CERN's Story

CERN Multimedia

2004-01-01

As part of the events to mark the Laboratory's fiftieth anniversary, members of the CERN personnel are telling the story of CERN. Robert Cailliau (on the right of the photograph), co-inventor of the Web and currently responsible for CERN's external communications, and Chiara Mariotti (in the center), a physicist working at CMS, were invited to talk about the history of CERN and the Web at a conference in the 'Science Thursdays' series entitled 'From the Quark to the Web' in Turin on 26 February. This was not their first appearance before a non-specialist audience (almost 1000 people that day!) eager to find out what goes on in a unique research centre like CERN as talking about the Laboratory's activities and its history are part and parcel of their work for the Organization. Anniversary Events in the Member States: This 'Science Thursday' event devoted to CERN was one of Italy's contributions to CERN's fiftieth anniversary celebrations. Coming up soon in the Member States: Italy International Centre...

CERN's Community "Log Book" turns 50

CERN Multimedia

Katarina Anthony

2015-01-01

For five decades, the CERN Bulletin has been a staple of the Organization. As CERN has grown as a laboratory and a community, the Bulletin has been there to cover each development as it happens. In honour of the publication's 50th anniversary, we're taking a trip through CERN’s history via the headings and hidden corners of its internal newsletter.     It's 1965 and CERN - now 11 years old - has matured from a simple lab to a fledgling community. While news could once spread in a single afternoon, CERN's growth necessitated a new approach to the sharing of internal information. Meanwhile, the CERN Courier - the only publication in town - was approaching a more global physics audience – an audience for whom CERN road closures were not breaking news. And so, in March 1965, the Weekly Bulletin was born. What was meant as a simple newsletter of events and internal announcements quickly developed into a wider source of news about CERN....

The hardware track finder processor in CMS at CERN

International Nuclear Information System (INIS)

Kluge, A.

1997-07-01

The work covers the design of the Track Finder Processor in the high energy experiment CMS at CERN/Geneva. The task of this processor is to identify muons and to measure their transverse momentum. The Track Finder makes it possible to determine the physical relevance of each high energetic collision and to forward only interesting data to the data analysis units. Data of more than two hundred thousand detector cells are used to determine the location of muons and to measure their transverse momentum. Each 25 ns a new data set is generated. Measurement of location and transverse momentum of the muons can be terminated within 350 ns by using an ASIC. The classical method in high energy physics experiments is to employ a pattern comparison method. The predefined patterns are compared to the found patterns. The high number of data channels and the complex requirements to the spatial detector resolution do not permit to employ a pattern comparison method. A so called track following algorithm was designed, which is able to assemble complete tracks through the whole detector starting from single track segments. Instead of storing a high number of track patterns the problem is brought back to the algorithm level. Comprehensive simulations, employing the hardware simulation language VHDL, were conducted in order to optimize the algorithm and its hardware implementation. A FPGA (field program able gate array)-prototype was designed. A feasibility study to implement the track finder processor employing ASICs was conducted. (author)

Quench testing of HTS sub-elements for 13 kA and 600 A leads designed to the specifications for the CERN Large Hadron Collider project

CERN Document Server

Cowey, L; Krischel, D; Bock, J J

2000-01-01

Ability to safely withstand and survive self quench conditions is an important consideration in the design and utilisation of HTS current leads. The provision of a non superconducting shunt path allows current to be diverted in the event of a transition to the normal state. This shunt should allow very rapid transfer of current out of the HTS material and be able to safely support the full load current for the time required to detect the fault and reduce the current to zero. However, the shunt should also be designed to minimise the increased heat load which will result from it's addition to the lead. Test of leads based on melt cast BSCCO 2212 utilising a fully integrated silver gold alloy sheath are described. The HTS sub- elements form part of a full 13 kA lead, designed to the specifications of CERN for the LHC project. The sub-elements proved able to fully comply with and exceed the quench performance required by CERN. The HTS module was quenched at the full design current and continued to maintain this ...

- NEW - CERN Housing Service – WWW BOOKING

CERN Multimedia

GS Department

2010-01-01

You can now easily reserve your room at the CERN Hotel and plan your stay at CERN directly online with help of the online CERN Hotel reservation NOW available at the following address: https://edh.cern.ch/Hostel/ Please contact the CERN Housing Service team if you have any queries (reception in Building 39, 74481). GS-SEM Group Infrastructure and General Services Department

CERN Library | Herwig Schopper and Luigi Di Lella present "60 Years of CERN Experiments and Discoveries" | 10 March

CERN Document Server

CERN Library

2016-01-01

"60 Years of CERN Experiments and Discoveries" edited by Herwig Schopper and Luigi Di Lella. Presentation on Thursday, 10 March at 4 p.m. in Room C The book is a compilation of the most important experimental results achieved during the past 60 years at CERN - from the mid-1950s to the recent discovery of the Higgs particle. It covers the results from the early accelerators at CERN to those at the LHC and provides an excellent review of CERN's achievements. Not only presented is the impressive scientific progress achieved during the past six decades presented, but also is demonstrated the special way in which successful international collaboration exists at CERN. The book has been reviewed in the January-February issue of the CERN Courier: see here. Thanks to an agreement between CERN and the publisher, the e-book is available online Open Access. 60 Years of CERN Experiments and Discoveries Edited by Herwig Schopper and Luigi Di Lella W...

Proposal of a Technical Design of the ATLAS Forward Region Shielding

CERN Document Server

Leroy, C; Palla, J; Pospísil, S; Puchmajer, P; Sodomka, J; Stekl, I

2002-01-01

The aim of this note is to present a technical design of the ATLAS forward region. The concept is based on segmented shielding supported by the results of an experiment performed at CERN - PS and Monte Carlo simulations extending these results to ATLAS situation. This concept is translated into a practical engineering design.

CERN strives to stay ahead

International Nuclear Information System (INIS)

Sutton, Christine.

1987-01-01

The paper examines the future of CERN, with respect to its proposed research programme and its need to save money. Proposals concerning what accelerators CERN should build for the future are outlined; machines such as the Large Hadron Collider and the CERN Linear Collider have been proposed. Experimental expectations for the first Large Electron Positron (LEP) collider (now close to completion) are briefly described, along with the experimental investigations for the second phase of operation of LEP where modifications will increase the machine's energy. Criticisms of CERN's management by its governing body are also discussed. (UK)

Inverted CERN School of Computing

CERN Multimedia

IT Department

2011-01-01

  The 5th edition of the Inverted CERN School of Computing (iCSC, “Where students turn into teachers”) will take place next Thursday and Friday (3 and 4 of March) at CERN, Building 31 - IT Amphitheatre - Third Floor. Attendance is free and open to everyone. The programme is designed so that you can attend the lectures that interest you. This year highlights: Cloud Computing, Software Engineering, Cryptography Registration is not mandatory, but will allow you to obtain a copy of the full booklet (first registered, first served). Programme overview: Thursday 3 March 2011 10:00 - 10:15 Introduction School opening 10:15 - 11:10 Lecture 1 Virtualization: what it is, how it works – Luigi Gallerani 11:20 - 12:15 Lecture 2 Server Virtualization at work – Carlos Garcia Fernandez 14:00 - 14:55 Lecture 3 Unweaving Clouds: Principles and Practice – Belmiro Moreira 15:30 - 16:25 Lecture 4 Understanding Cryptography: From Caesar to Public-Key – Nicola...

JACoW Decoupling CERN accelerators

CERN Document Server

Dworak, Andrzej

2018-01-01

The accelerator complex at CERN is a living system. Accelerators are being dismantled, upgraded or change their purpose. New accelerators are built. The changes do not happen overnight, but when they happen they may require profound changes across the handling systems. Central timings (CT), responsible for sequencing and synchronization of accelerators, are good examples of such systems. This paper shows how over the past twenty years the changes and new requirements influenced the evolution of the CTs. It describes experience gained from using the Central Beam and Cycle Manager (CBCM) CT model, for strongly coupled accelerators, and how it led to a design of a new Dynamic Beam Negotiation (DBN) model for the AD and ELENA accelerators, which reduces the coupling, increasing accelerator independence. The paper ends with an idea how to merge strong points of both models in order to create a single generic system able to efficiently handle all CERN accelerators and provide more beam time to experiments and LHC.

CERN, the US and the W

CERN Document Server

Crease, Robert P

2004-01-01

In 1983, CERN physicists discovered the W boson earning them the first Nobel prize. This discovery served as the turning point for CERN from the point of view of the self-confidence of its physicists, the confidence of its fund-raisers, and its reputation in the US. However, this feat did not come as easy for CERN. Rivalry with the US revealed complexities. Nevertheless in the end, CERN physicists became the more successful. Recognizing this, US physicists agreed to collaborate with CERN physicists. Today, there is no more political competition over accelerators between the two groups. (Edited abstract).

The ALICE experiment at the CERN LHC

NARCIS (Netherlands)

Aamodt, K.; de Haas, A.P.; Grebenyuk, O.|info:eu-repo/dai/nl/304848883; Ivan, C.G.|info:eu-repo/dai/nl/304847747; Kamermans, R.|info:eu-repo/dai/nl/073698733; Mischke, A.|info:eu-repo/dai/nl/325781435; Nooren, G.J.L.|info:eu-repo/dai/nl/07051349X; Oskamp, C.J.; Peitzmann, T.|info:eu-repo/dai/nl/304833959; Simili, E.; van den Brink, A.; van Eijndhoven, N.J.A.M.|info:eu-repo/dai/nl/072823674; Yuting, B.

2008-01-01

ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy

Collide@CERN - public lecture

CERN Multimedia

2012-01-01

CERN, the Republic and Canton of Geneva and the City of Geneva are delighted to invite you to a public lecture by Gilles Jobin, first winner of the Collide@CERN Geneva Dance and Performance Artist-in-residence Prize, and his CERN inspiration partner, Joao Pequenao. They will present their work in dance and science at the Globe of Science and Innovation on Wednesday, 23 May 2012 at 7 p.m. (doors open at 6.30 p.m.).   
                                                  Programme 19:00 Opening address by - Professor Rolf-Dieter Heuer, CERN Director-General, - Ariane Koek...

CERN

CERN Multimedia

2007-01-01

"Geat ready for the mother of all particle accelerator: the Large Hadron Collider (LHC), nearing completion at CERN, the International particle physics lab headquartered in Geneva, Switzerland." (1 paragraph)

CERN Housing Service – New website

CERN Multimedia

GS Department

2009-01-01

You can now consult the new CERN Housing Service website which includes information relating to the CERN hostels booking rules, special negotiated rates for hotels in the local area, rental offers from the local private sector, etc.: https://espace.cern.ch/hostel-service/default.aspx Please contact the CERN Housing Service team if you have any queries (reception in Building 39, 74481). GS-SEM Group Infrastructure and General Services Department

CERN Housing Service – New website

CERN Multimedia

GS Department

2009-01-01

You can now consult the new CERN Housing Service website which includes information relating to the CERN hostel booking rules, special negotiated rates for hotels in the local area, rental offers from the local private sector, etc.: https://espace.cern.ch/hostel-service/default.aspx Please contact the CERN Housing Service team if you have any queries (reception in Building 39, 74481). GS-SEM Group Infrastructure and General Services Department

CERN Relay Race

CERN Document Server

2005-01-01

The CERN Relay Race will take place around the Meyrin site on Wednesday 18 May between 12.15 and 12.35. This year, weather permitting, there will be some new attractions in the start/finish area on the field behind the Main Building. You will be able to: listen to music played by the CERN Jazz Club; buy drinks at the bar organised by the CERN Running Club; buy lunch served directly on the terrace by the restaurant Novae. ATTENTION: concerning traffic, the recommendations are the same as always: If possible, please avoid driving on the site during this 20 minute period. If you do meet runners in your car, please STOP until they all have passed. Thank you for your understanding.

CERN: Ten-Tesla twin

International Nuclear Information System (INIS)

Anon.

1991-01-01

An important step in the development of the high field superconducting magnets for CERN's proposed LHC proton collider came on 21 October when a 1 metre-long model of the proposed twin-dipole magnet produced a field of 10 Tesla in its two o beam apertures at the design temperature of 1.8K. The LHC designers have to plan for proton beams approaching 8 TeV to attain the right conditions for the quarks and gluons hidden deep inside protons to produce new physics. To contain these very high energy protons in the tight track of the 27-kilometre LEP tunnel would need the strongest magnetic bending power ever used in a full storage ring

The role of DEM at CERN

CERN Document Server

Van der Bij, E

2005-01-01

The DEM group in the Technical Support department provides services for the fabrication of special printed circuits that are invaluable for the whole particle physics community. The capability is based around a core technology that is developed by using skills to etch and process materials that are not commonly used in industry, combined with production methods used in PCB manufacturing. The role of the prototyping facilities is to assist engineers and physicists and to offer them easy access to competencies often not available from industry. At the same time, with the expertise and production capacity available, it makes that CERN is always geared up to handle emergency situations. The design office and the assembly workshop that are also part of DEM have similar roles that lower the cost and improve the quality and maintainability of electronics developed at CERN.

Upcoming opening of CERN's new Mobility Centre

CERN Multimedia

2016-01-01

On 29 February, CERN’s brand new Mobility Centre opened in the Globe car park. The Centre has been created to cater to the transport needs of everyone at CERN, to simplify procedures and to centralise all the transport services on offer: the rental of CERN bikes and cars, the CERN car-sharing scheme and SIXT car rental.   From 29 February onwards, the Mobility Centre in the Globe car park will be the place to go for all your duty travel needs: rental of CERN cars (with or without the CERN logo), SIXT car rental, CERN bike rental, distribution of cards allowing the use of CERN’s self-service bike- and car-sharing schemes. That same day, the premises currently housing the Car Pool in Building 130 will become the CERN garage, responsible for: upkeep and repairs on CERN bikes, minor maintenance work on CERN vehicles (e.g. replacing windscreen wipers, bulbs and fuses, refilling windscreen washer fluid, pumping up tyres, etc.), arranging and following up the repair and maintenan...

Proceedings of CAS - CERN Accelerator School: Advanced Accelerator Physics Course

International Nuclear Information System (INIS)

Herr, W

2014-01-01

This report presents the proceedings of the Course on Advanced Accelerator Physics organized by the CERN Accelerator School. The course was held in Trondheim, Norway from 18 to 29 August 2013, in collaboration with the Norwegian University of Science and Technology. Its syllabus was based on previous courses and in particular on the course held in Berlin 2003 whose proceedings were published as CERN Yellow Report CERN-2006-002. The field has seen significant advances in recent years and some topics were presented in a new way and other topics were added. The lectures were supplemented with tutorials on key topics and 14 hours of hands on courses on Optics Design and Corrections, RF Measurement Techniques and Beam Instrumentation and Diagnostics. These courses are a key element of the Advanced Level Course

CERN and the LHC

CERN Multimedia

Cramer, J G

1992-01-01

CERN, a high-energy physics laboratory in Europe, is planning to build a more powerful particle accelerator, the Large Hadronic Collider. The US spreads its accelerators around the country while most of Europe's research is conducted at and around CERN.

Helping CERN give back to society

CERN Multimedia

2014-01-01

The CERN & Society mission: ‘To spread the CERN spirit of scientific curiosity for the inspiration and benefit of society.’   Digital library schools in Africa, Arts@CERN, a beam line for schools competition and perhaps soon a dedicated biomedical research facility: CERN infrastructure and expertise have a great influence on society, and we have the potential to do much more. For that, however, we need help, and that’s why we have launched the CERN & Society initiative, which this week sees the publication of a new website for those who want to understand more about how our research touches everyday life, as well as for those who wish to help CERN in this new endeavour. Fundamental research fulfils a very human need. The quest to understand the universe we live in is as old as humanity itself, and CERN is in the vanguard of that effort today. For our scientists and engineers, pushing technology to the limit is part of their day job, and in doing so they ...

Developers@CERN Forum | Python at CERN | 30 – 31 May

CERN Multimedia

2016-01-01

The Developers@CERN Forum is an event by developers for developers aimed at promoting knowledge- and experience-sharing (see here). The second forum will take place in the IT auditorium in the afternoons of 30 and 31 May.   With the topic “Python at CERN”, it will consist of a series of talks regarding the Python language, frameworks and tools used at CERN. Are you a Python guru or would you like to learn? Come and share your Python experiences with other developers! Submissions for presentations and workshops are open until 9 May at http://cern.ch/dev-forum. If you would like to stay informed about this or future events, please subscribe to the announcement e-group (just a few e-mails per year) here. 

People and things. CERN Courier, May 1989, v. 29(4)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1989-05-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. CERN's Accelerator School and Uppsala University, Sweden, are jointly organizing a course on Advanced Accelerator Physics, to be held in Uppsala from 18-29 September, Students should have a basic knowledge of accelerators, and the course is designed to highlight the problems of small rings.The new World Laboratory headquarters in Lausanne, Switzerland, were formally opened on 7 March.

People and things. CERN Courier, May 1989, v. 29(4)

International Nuclear Information System (INIS)

Anon.

1989-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. CERN's Accelerator School and Uppsala University, Sweden, are jointly organizing a course on Advanced Accelerator Physics, to be held in Uppsala from 18-29 September, Students should have a basic knowledge of accelerators, and the course is designed to highlight the problems of small rings.The new World Laboratory headquarters in Lausanne, Switzerland, were formally opened on 7 March

Collide@CERN ProHelvetia Public Lecture

CERN Multimedia

CERN. Geneva; Heuer, Rolf; Mr. de Diesbach, Simon; Mr. Dubois, Marc; Ms. Perrenoud, Laura; Mr. Vust, Michel; Mrs. Bello, Monica

2015-01-01

You are very warmly invited to the opening presentation of Fragment.In’s residency at CERN. Fragment.In are the winners of Collide@CERN ProHelvetia, a collective formed by Laura Perrenoud, Simon de Diesbach, and Marc Dubois. They will present their artistic work along with their CERN scientific inspiration partner, who will present his/her work on Science. In their proposal, Fragment.In has a unique, original and creative approach to data visualization. We look forward to having them at CERN. Collide@CERN is the three month residency programme providing artists with time and space to reflect, research and renew their artistic practice.

CERN CAR CLUB

CERN Multimedia

Automobile club

2009-01-01

You are cordially invited to the next General Assembly of the CERN Car Club Tuesday 12 January 2010 at 5:45pm Bldg. 593 / room 11 As the end of 2009 is approaching, it is time to think about renewing your subscription. Therefore next time you are on the CERN-Meyrin site or at the Post Office counter don’t forget to fill in the payment slip to continue to be a part of our large family. The fee remains unchanged: 50 CHF. For those of you who are regular users of our equipment and who know of all the advantages that the club is in a position to offer, it seems pointless to give details, we are sure that many of you have made use of them and are satisfied. We remind you everyone working on CERN site is entitled to become a member of our club, this includes industrial support personnel and staff of companies which have a contract with CERN. If you are not yet a member, come and visit us! We will be happy to welcome you and show you the facilities, or you can visit our web site. The use of the club&...

CERN Shop - Christmas Sale in Bldg. 33

CERN Multimedia

PH Department

2010-01-01

Looking for Christmas present ideas? The CERN Shop will give CERN card holders a special reduction of 10 % on all CERN Shop articles from Monday 13.12.2010 to Saturday 18.12.2010. Come and visit the CERN Shop in the Reception Building 33.

Status and physics of the SHiP experiment at CERN

CERN Document Server

Buonaura, Annarita

2017-01-01

SHIP is a new general purpose fixed target facility, whose Technical Proposal has been recently reviewed by the CERN SPS Committee and by the CERN Research Board. The two boards recommended that the experiment proceeds further to a Comprehensive Design phase in the context of the new CERN Working group "Physics Beyond Colliders", aiming at presenting a CERN strategy for the European Strategy meeting of 2019. In its initial phase, the 400GeV proton beam extracted from the SPS will be dumped on a heavy target with the aim of integrating $2 \\times 10^{20}$ pot in 5 years. A dedicated detector, based on a long vacuum tank followed by a spectrometer and particle identification detectors, will allow probing a variety of models with light long-lived exotic particles and masses below O(10) GeV /c$^{2}$. The main focus will be the physics of the so-called Hidden Portals, i.e. search for Dark Photons, Light scalars and pseudo-scalars, and Heavy Neutrinos. The sensitivity to Heavy Neutrinos will allow for the first time...

Status and physics of the SHiP experiment at CERN

CERN Document Server

Buonaura, Annarita

2018-01-01

SHIP is a new general purpose fixed target facility, whose Technical Proposal has been recently reviewed by the CERN SPS Committee and by the CERN Research Board. The two boards recommended that the experiment proceeds further to a Comprehensive Design phase in the context of the new CERN Working group "Physics Beyond Colliders", aiming at presenting a CERN strategy for the European Strategy meeting of 2019. In its initial phase, the 400GeV proton beam extracted from the SPS will be dumped on a heavy target with the aim of integrating $2 \\times 10^{20}$ pot in 5 years. A dedicated detector, based on a long vacuum tank followed by a spectrometer and particle identification detectors, will allow probing a variety of models with light long-lived exotic particles and masses below O(10) GeV /c$^{2}$. The main focus will be the physics of the so-called Hidden Portals, i.e. search for Dark Photons, Light scalars and pseudo-scalars, and Heavy Neutrinos. The sensitivity to Heavy Neutrinos will allow for the first time...

News from the CERN Printshop

CERN Multimedia

IT Department

2010-01-01

Please note there are a limited number of the 2011 CERN wall calendars now available from the Printshop, located in Building 510-R-007. These have been printed on card in A3 and A4. If you need more than a few copies, there are two solutions: download the file and print your own on paper; send us an e-mail to place an order. Please visit the new Printshop website for more information: http://cern.ch/printshop. Printshop reception opening hours: 10h00-12h00 and 13h00-15h00. Many thanks. CERN Printshop Tel: 72426 E-mail: Printshop@cern.ch

Scientific Information Service at CERN

CERN Document Server

Pereira, Margarida

2016-01-01

Dissemination of information is an essential part of CERN's mission. It brings people together from all around the world and trains the scientists of tomorrow. CERN scientific output is documented and made available for the scientific community and the general public through the CERN Document Server, INSPIRE-HEP and Wikipedia. This report presents the work done in the Scientific Information Service during the summer student program.

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2007-01-01

The following course sessions are scheduled in the framework of the 2007 CERN Technical Training Programme and still have places available. You may find the full, updated Technical Training course programme on our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE FrontPage 2003 – Level 1\tE\t29-30.11\t2 d Word 2007 – niveau 2 : ECDL\tF\t13-14.12\t2 d SOFTWARE AND SYSTEM TECHNOLOGIES JAVA – Level 1\tE\t03-05.12\t3 d ELECTRONIC DESIGN LabVIEW Base 1 F\t03-05.12\t3 d LabVIEW Basics 2\tE\t06-07.12\t2 d MECHANICAL DESIGN AutoCAD Mechanical 2006\tF\t27-28.11\t2 d Technique du vide\tF\t12-13.11\t2 d If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO and apply electronically via EDH from the course description pages that can be found at: http://cta.cern.ch/cta2/f?p=110:9 under ‘Technical Training’ with the detailed course program. Registration for all courses is always open – sessions for the less-reque...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2011-01-01

The following course sessions are scheduled in the framework of the 2011 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies C++ Part 1 - Hands-On Introduction\t25-Jan-11\t28-Jan-11\tEnglish\t4 days CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t15-Feb-11\t16-Feb-11\tEnglish\t2 days CERN openlab/Intel Computer Architecture and Performance Tuning Workshop\t08-Feb-11\t09-Feb-11\tEnglish\t2 days JAVA - Level 2\t17-Jan-11\t20-Jan-11\tEnglish\t4 days Python - Hands-on Introduction\t07-Feb-11\t10-Feb-11\tEnglish\t4 days Secure coding for Java\t12-Jan-11\t12-Jan-11\tEnglish\t1 day Secure coding for PHP\t14-Jan-11\t14-Jan-11\tEnglish\t1 day Secure coding for Python\t13-Jan-11\t13-Jan-11\tEnglish\t0.5 day Secure coding for Python\t13-Jan-11\t13-Jan-11\tEnglish\t0.5 day Electronic design Technologie S-Web\t12-Jan-11\t13-Jan-11\tFrench\t2 jours Mechanical Design ANSYS Workbench advanced\t31-Jan...

UK Mission to CERN

CERN Multimedia

2004-01-01

At the end of June, nine experts from UK industry visited CERN to study techniques for developing distributed computing systems and to look at some specific applications. In a packed three-day programme, almost 40 CERN experts presented a comprehensive survey of achievements.

Cern-Grid besteht Belastungsprobe

CERN Multimedia

2005-01-01

In the European Center for Nuclear Research, CERN, in Geneva the Grid Computing infrastructure's building took a further hurdle: between CERN and seven Research Centers around the World, during 10 days, a continuous flow of about 600 MByte was achieved (¼ page)

CERN welcomes new members

Science.gov (United States)

2017-08-01

Lithuania is on course to become an associate member of CERN, pending final approval by the Lithuanian parliament. Associate membership will allow representatives of the Baltic nation to take part in meetings of the CERN Council, which oversees the Geneva-based physics lab.

CERN openlab Open Day

CERN Multimedia

Purcell, Andrew Robert

2015-01-01

The CERN openlab Open Day took place on 10 June, 2015. This was the first in a series of annual events at which research and industrial teams from CERN openlab can present their projects, share achievements, and collect feedback from their user communities.

CERN's 25th Anniversary

CERN Multimedia

CERN PhotoLab

1979-01-01

A ceremony in the Main Auditorium on 23 June 1979 to mark the 25th Anniversary of CERN. A photo of the five Director-Generals of CERN, from left to right: John Adams, Willi Jentschke, Felix Bloch, Viki Weisskopf and Leon van Hove.

Developers@CERN Forums: Python

CERN Multimedia

CERN. Geneva

2016-01-01

The Developers@CERN Forums second edition took place at the end of May on the topic of Python. How do developers at CERN interact with Python? Which cutting-edge projects are using Python? What were the highlights of this most recent forum?

CERN at ESOF 2016

CERN Multimedia

James Gillies

2016-01-01

CERN had a major presence at the ESOF2016 conference this week, largely in collaboration with our EIROforum partners. A keynote session featuring the CERN Director-General, Fabiola Gianotti, EMBL Director-General, Iain Mattaj, and ESO Director for Science, Rob Ivison, and chaired by BBC science correspondent Pallab Ghosh debated the value of European collaboration in science.   The focal point of EIROforum’s presence was a stand highlighting the societal benefit of EIROforum science. (Image: Matt Wilkinson Photography/ ESOF 2016) A double session covered the science of the EIROs, with ATLAS physicist Claire Lee representing CERN, and there was a session exploring the ways that the EIROforum organisations create business value locally, with the leader of the Knowledge Transfer group, Giovanni Anelli, representing CERN. The focal point of EIROforum’s presence was a stand highlighting the societal benefit of EIROforum science. Side events linked to the stand discussed subjects su...

Industrial Activity at CERN

CERN Document Server

Kowalik, G

2000-01-01

The decrease in the number of CERN staff creates the need for optimization of the non-core, infrastructure-related activities. An industrial, service-orientated approach has long been considered as an appropriate way to cope with the problem of diminishing resources. This paper presents industrial and service activity issues at CERN based on the experience of the exploitation of the power network. The most important problems linked to the application of the industrial approach to the exploitation of equipment in the CERN research environment are covered. These include the interface between accelerators and electrical exploitation services, external and internal regulations, sharing of responsibility between CERN staff and external contractors, continuous modification of clients' requirements, the balance between the cost of accelerator downtime versus the cost of infrastructure upgrade. A benchmarking through a comparison with a big industrial manufacturer is followed by recommendations for possible improveme...

CERN car sharing scheme now open to everyone

CERN Multimedia

GS Department

2011-01-01

The CERN car sharing service is a self-service scheme providing a pool of 30 CERN cars available for pick-up free of charge from 13 points around the Meyrin and Prévessin sites. From Thursday, 1st December 2011, the service will be open to all members of the CERN personnel and contractors' personnel, in the framework of their professional activities at CERN only. The conditions of use can be consulted at: http://gs-dep.web.cern.ch/en/content/Mobility/Car_sharing To be able to use the service, members of the CERN personnel and contractors' personnel must: have a contractual link to CERN, possess an e-mail address registered in the CERN databases; hold an RFID access card, which can be obtained from the CERN Car Pool on presentation of a valid CERN access card. Car Pool, Building 130-R-012, open Monday-Friday, 8.00 a.m.-12.00 noon/1.00 p.m.-5.00 p.m. https://gs-dep.web.cern.ch/en/content/car-pool GS-IS

CERN Shop - Christmas Sale in Bldg. 33

CERN Multimedia

PH Department

Looking for Christmas present ideas? The CERN Shop will give the CERN card holders a special reduction of 10 % on all CERN Shop articles from Friday 11.12.2009 to Thursday 17.12.2009. Come to visit the CERN Shop at the Reception, Building 33. PH-EDU-PO

Member State Event: Telling CERN's story !

CERN Multimedia

2004-01-01

As part of the events to mark the Laboratory's fiftieth anniversary, members of the CERN personnel are telling the story of CERN. Robert Cailliau (on the right), currently responsible for CERN's external communications, and Chiara Mariotti (in the center), a physicist working at CMS, were invited to talk about the history of CERN and the Web at a conference in the 'Science Thursdays' series entitled 'From the Quark to the Web' in Turin on 26 February.

Commissioning the CERN IT Agile Infrastructure with experiment workloads

Science.gov (United States)

Medrano Llamas, Ramón; Harald Barreiro Megino, Fernando; Kucharczyk, Katarzyna; Kamil Denis, Marek; Cinquilli, Mattia

2014-06-01

In order to ease the management of their infrastructure, most of the WLCG sites are adopting cloud based strategies. In the case of CERN, the Tier 0 of the WLCG, is completely restructuring the resource and configuration management of their computing center under the codename Agile Infrastructure. Its goal is to manage 15,000 Virtual Machines by means of an OpenStack middleware in order to unify all the resources in CERN's two datacenters: the one placed in Meyrin and the new on in Wigner, Hungary. During the commissioning of this infrastructure, CERN IT is offering an attractive amount of computing resources to the experiments (800 cores for ATLAS and CMS) through a private cloud interface. ATLAS and CMS have joined forces to exploit them by running stress tests and simulation workloads since November 2012. This work will describe the experience of the first deployments of the current experiment workloads on the CERN private cloud testbed. The paper is organized as follows: the first section will explain the integration of the experiment workload management systems (WMS) with the cloud resources. The second section will revisit the performance and stress testing performed with HammerCloud in order to evaluate and compare the suitability for the experiment workloads. The third section will go deeper into the dynamic provisioning techniques, such as the use of the cloud APIs directly by the WMS. The paper finishes with a review of the conclusions and the challenges ahead.

Commissioning the CERN IT Agile Infrastructure with experiment workloads

International Nuclear Information System (INIS)

Llamas, Ramón Medrano; Megino, Fernando Harald Barreiro; Cinquilli, Mattia; Kucharczyk, Katarzyna; Denis, Marek Kamil

2014-01-01

In order to ease the management of their infrastructure, most of the WLCG sites are adopting cloud based strategies. In the case of CERN, the Tier 0 of the WLCG, is completely restructuring the resource and configuration management of their computing center under the codename Agile Infrastructure. Its goal is to manage 15,000 Virtual Machines by means of an OpenStack middleware in order to unify all the resources in CERN's two datacenters: the one placed in Meyrin and the new on in Wigner, Hungary. During the commissioning of this infrastructure, CERN IT is offering an attractive amount of computing resources to the experiments (800 cores for ATLAS and CMS) through a private cloud interface. ATLAS and CMS have joined forces to exploit them by running stress tests and simulation workloads since November 2012. This work will describe the experience of the first deployments of the current experiment workloads on the CERN private cloud testbed. The paper is organized as follows: the first section will explain the integration of the experiment workload management systems (WMS) with the cloud resources. The second section will revisit the performance and stress testing performed with HammerCloud in order to evaluate and compare the suitability for the experiment workloads. The third section will go deeper into the dynamic provisioning techniques, such as the use of the cloud APIs directly by the WMS. The paper finishes with a review of the conclusions and the challenges ahead.

10,000th teacher visits CERN

CERN Multimedia

Kathryn Coldham

2016-01-01

This year, the 10,000th teacher will visit CERN since its first teacher programme in 1998.   HST 2016 teachers with CERN Director-General Fabiola Gianotti in the CERN Council Chamber. (Image: Maximilien Brice/CERN) This summer, CERN welcomed the 10,000th teacher to participate in one of its teacher programmes! This milestone was achieved in this year’s International High School Teacher (HST) programme, a three-week residential programme that saw 48 enthusiastic teachers flock from all over the world to help inspire young minds. Taking place every July since 1998, the HST programme aims to increase teachers’ knowledge on the cutting-edge particle physics research currently being carried out at CERN. It also opens up a whole new world of educational resources available for use by the teachers to inspire their students’ curious young minds. More information is available here.

CERN and Pakistan consolidate their partnership

CERN Multimedia

2006-01-01

During the President of Pakistan's visit to CERN, the Laboratory and Pakistan decided to strengthen their collaboration. The President of Pakistan, Pervez Musharraf, the Chairman of PAEC, Parvez Butt, and CERN's Director-General, Robert Aymar, exchange congratulations following the signing of the letter of intent to strengthen partnership between CERN and Pakistan.The President of the Islamic Republic of Pakistan, Pervez Musharraf, during his speech in the Council Chamber. The President of the Islamic Republic of Pakistan, General Pervez Musharraf, visited CERN on 27 January this year, accompanied by an important delegation of five ministers from the Pakistani Government, the Chairman of Pakistan's Atomic Energy Commission (PAEC), Parvez Butt, and an eminent former Chairman of the Commission, Ishfaq Ahmad, who pioneered cooperation with CERN. Welcomed by CERN's Director-General, Robert Aymar, the President visited the CMS experiment to which Pakistan is making a substantial contribution. The presidential pa...

ATLAS copies its first PetaByte out of CERN

CERN Multimedia

M. Branco; P. Salgado; L. Goossens; A. Nairz

2006-01-01

On 6th August ATLAS reached a major milestone for its Distributed Data Management project - copying its first PetaByte (1015 Bytes) of data out from CERN to computing centers around the world. This achievement is part of the so-called 'Tier-0 exercise' running since 19th June, where simulated fake data is used to exercise the expected data flow within the CERN computing centre and out over the Grid to the Tier-1 computing centers as would happen during the real data taking. The expected rate of data output from CERN when the detector is running at full trigger rate is 780 MB/s shared among 10 external Tier-1 sites(*), amounting to around 8 PetaBytes per year. The idea of the exercise was to try to reach this data rate and sustain it for as long as possible. The exercise was run as part of the LCG's Service Challenges and allowed ATLAS to test successfully the integration of ATLAS software with the LCG middleware services that are used for low level cataloging and the actual data movement. When ATLAS is produ...

CERN UN Roundtable

CERN Multimedia

CERN. Geneva; Del Rosso, Antonella; Gillies, James

2014-01-01

In the spirit of strengthening links and sharing best practices among the two Organizations, UNOG and CERN will be jointly organizing a round table discussion on the issue of “The challenge of communicating science and technology to the world: issues and solutions”. It is hoped that the discussions can highlight the experience of various organizations and institutions in their efforts to communicate and inform in several languages on topics – science and technology – that are often perceived as distant and arduous by the layman. ==>> Please note that registrations are now closed. It is not necessary to register for this event if you plan to watch it live on http://webcast.cern.ch. Send your questions to the speakers by email to: question@cern.ch

CERN servers donated to Ghana

CERN Multimedia

CERN Bulletin

2012-01-01

Cutting-edge research requires a constantly high performance of the computing equipment. At the CERN Computing Centre, computers typically need to be replaced after about four years of use. However, while servers may be withdrawn from cutting-edge use, they are still good for other uses elsewhere. This week, 220 servers and 30 routers were donated to the Kwame Nkrumah University of Science and Technology (KNUST) in Ghana.   “KNUST will provide a good home for these computers. The university has also developed a plan for using them to develop scientific collaboration with CERN,” said John Ellis, a professor at King’s College London and a visiting professor in CERN’s Theory Group.  John Ellis was heavily involved in building the relationship with Ghana, which started in 2006 when a Ghanaian participated in the CERN openlab student programme. Since 2007 CERN has hosted Ghanaians especially from KNUST in the framework of the CERN Summer Student Progr...

Back to school at CERN

CERN Multimedia

2007-01-01

The Education Group is expanding its courses for teachers: over 700 secondary school teachers will be going back to school at CERN this year. Thirty-seven teachers from various countries participated in the High School Teachers at CERN programme, with Rolf Landua, the head of the Education Group, Mick Storr, the Education Group’s programme coordinator and Robert Aymar, the CERN Director-General.From 3 to 8 July, CERN hosted the runners-up from the finals of the British Physics Olympiad, the prize for the winners being a trip to the International Physics Olympiad in Iran. The five students were invited to visit CERN to attend the summer student programme for three days. "This gives us an opportunity to study new subjects that are not necessarily part of the school curriculum. Even though I’ve heard about the various types of research, it is a real plus to be able to attend these lectures", explains Oliver Mac Farlane, a young stu...

The first CERN Spring Campus

CERN Multimedia

CERN Bulletin

2014-01-01

From 14 to 16 April, the first edition of the CERN Spring Campus took place in Spain. Taking place over three intensive days, this event brought experts from CERN together at the University of Oviedo, where they met the engineers and scientists of the future in a programme of scientific and technological dissemination and cultural exchange.   The young participants of the first CERN Spring Campus and their instructors show their enthusiasm after the intensive three-day course. “This three-day school focuses on preparing young engineers for the job market, with a particular emphasis on computing,” explains Derek Mathieson, Advanced Information Systems Group Leader in the GS Department and Head of the CERN Spring Campus organising committee. “We organised talks on entrepreneurship and IT, as well as on job interviews and CV writing. It was also an important opportunity for the participants to meet CERN computing engineers to find out what it is like to work in I...

CERN's role in medical applications

CERN Multimedia

Antonella Del Rosso

2014-01-01

Last week, CERN hosted the first meeting of the International Strategy Committee for medical applications. This Committee will help CERN establish its roadmap in the field of research and development activities for medical applications. Here the CERN Bulletin speaks with the Chair of the Committee as he shares his expectations and his vision.   Dr Michael Baumann is the Director of the Radiation Oncology department at the Carl Gustav Carus University Hospital in Dresden and of the Institute for Radiooncology of the Helmholtz-Zentrum Dresden-Rossendorf (Germany). He has recently been appointed Chair of CERN’s International Strategy Committee for medical applications – the team of experts who will advise the CERN Medical Applications Study Group led by Steve Myers. “CERN has a tremendous record in physics and basic research,” says Baumann. “I think that it has a very important role in steering some of the R&D that cannot be done at universities ...

Romania's flag raised at CERN

CERN Multimedia

Corinne Pralavorio

2016-01-01

A ceremony was held for the raising of the Romanian flag alongside the flags of CERN’s 21 other Member States.   The Romanian flag is raised alongside the flags of CERN’s other Member States, in the presence of the Romanian President, CERN’s Director-General, the President of the CERN Council and a large Romanian delegation. (Image: Maximilien Brice/ Sophia Bennett/CERN) On Monday, 5 September, the Romanian flag was raised in front of CERN for the first time, marking the country’s accession to Membership of the Organization. The blue, yellow and red flag joined those of the other 21 Member States of CERN in a ceremony attended by the President of Romania, Klaus Iohannis, the Romanian Minister for Education and Scientific Research, Mircea Dumitru, and several other members of the President’s office, the government and academia in Romania. The country officially became a CERN Member State on 17 July 2016, after 25 years of collaboration between the...

UN Secretary General visits CERN

CERN Multimedia

2008-01-01

UN Secretary General praises CERN in recent visit. Ban Ki-moon, Robert Aymar, CERN Director-General, and Sergei Ordzhonikidze, Director-General of the United Nations Office in Geneva at the CMS site.On Sunday 31 August, Ban Ki-moon, the UN Secretary General, made an important visit to CERN. Arriving in the late afternoon, he was warmly greeted at Point 5 by Robert Aymar, the Director-General, and the Sous-préfet of Gex, Olivier Laurens-Bernard. Accompanied by a UN delegation, Ban Ki-moon was also introduced to Jos Engelen, the Chief Scientific Officer, and Jim Virdee, the CMS spokesperson. He then took the opportunity to visit CMS and the machine tunnel. At the end of his short trip, Ban Ki-moon signed the Guest Book in the tradition of important dignitaries visiting CERN. Expressing his admiration for CERN’s spirit of collaboration, Ban Ki-moon said, "I am very honored to visit CERN, an invaluable scientific institution a...

2nd Developers@CERN Forum

CERN Multimedia

CERN. Geneva

2016-01-01

Are you a Python guru or would you like to learn?   The Developers@CERN Forum is an event by developers, for developers, aimed at promoting knowledge and experience sharing. This edition will take place at the IT Amphitheatre, on the 30th and 31st of May afternoons. It will consist of a series of short presentations and workshops. The topic for this conference will be Python at CERN: language, frameworks and tools. Have you got an idea for a presentation or workshop? Then, tell us about it (deadline on 9th of May). Registration will open in early May. Please subscribe to developers-forum-announce@cern.ch mailing list for further information. This event will be made by developers for developers. We are counting on your presence, but also on your contributions! To learn more about the initiative, read the CERN Bulletin article. Organization You can get in touch us at developers-forum-organizers@cern.ch.

CERN openlab enters new phase

CERN Multimedia

Katarina Anthony

2012-01-01

The newest phase of CERN’s openlab framework was inaugurated this week during a meeting of the openlab partners. This phase will last three years and will bring together existing openlab partners and a new contributor: Huawei.   Group picture taken at the first CERN openlab IV annual Board of Sponsors meeting, in the presence of the CERN Director-General, the partners and the openlab team members. © Fons Rademakers (CERN Photo Club). Eleven years ago, the creation of the CERN openlab created a long-term link between industrial partners and the Organization. Its framework has allowed industry to carry out large-scale IT research and development in an open atmosphere – an “Open Lab”, if you will. For CERN, openlab has contributed to giving the computing centre and, more broadly, the LHC community, the opportunity to ensure that the next generation of services and products is suitable to their needs. Now entering its fourth phase, openlab will ...

CERN and ESA: fundamentally contrasting organisations?

International Nuclear Information System (INIS)

Bowell, Valerie

1988-01-01

The paper concerns the European Organisation for Nuclear Research (CERN) and the European Space Agency (ESA), and questions whether the United Kingdom (U.K.) will continue as a full member of these two organisations. A description is given of the establishment of these institutions, their collaboration and their activities. The effect of the U.K.'s financial difficulties on both CERN and ESA programmes is discussed. Figures are given on the actual cost to the U.K. of CERN and ESA, and also the CERN and ESA subscriptions as a percentage of total spending on particle physics and astronomy, for the period 1980-8. The U.K. committment to the ESA and CERN programmes are both described. (U.K.)

submitter Radiation Protection Studies for CERN LINAC4/SPL Accelerator Complex

CERN Document Server

Mauro, Egidio; Silari, Marco

2009-01-01

CERN is presently designing a new chain of accelerators to replace the present Proton Synchrotron (PS) complex: a 160 MeV room-temperature H$^-$ linac (Linac4) to replace the present 50 MeV proton linac injector, a 3.5 GeV Superconducting Proton Linac (SPL) to replace the 1.4 GeV PS booster (PSB) and a 50 GeV synchrotron (named PS2) to replace the 26 GeV PS. Linac4 has been funded and the civil engineering work started in October 2008, whilst the SPL is in an advanced stage of design. Beyond injecting into the future 50 GeV PS, the ultimate goal of the SPL is to generate a 4 MW beam for the production of intense neutrino beams. The radiation protection design is driven by the latter requirement. This thesis summarizes the radiation protection studies conducted for Linac4. FLUKA Monte Carlo simulations, complemented by analytical estimates, were performed 1) to evaluate the propagation of neutrons through the waveguide, ventilation and cable ducts placed along the accelerator, 2) to estimate the radiological i...

An Algerian Minister visits CERN

CERN Multimedia

2006-01-01

The Algerian Minister of Higher Education and Scientific Research, Rachid Haraoubia, visited CERN on 14 November. His party included the Rector of the University of Blida and the Director of the Algerian Ecole Nationale Polytechnique. Welcomed by CERN's Director-General, Robert Aymar, and Secretary-General, Maximilien Metzger, he signed the VIP Visitors' Book before going on to visit the ATLAS experiment and the LHC tunnel. He then had the opportunity to meet Algerian scientists working at CERN. Some fifteen Algerian physicists attached to European and US institutes are participating in the LHC experiments, in particular ATLAS. A formal collaboration agreement between Algeria and CERN is expected to be drawn up in the near future.

Design of a control system for stepper motors with micro-metric precision employed in the beam emittance measurement of the Linac4 at CERN

CERN Document Server

AUTHOR|(CDS)2207212; Dueñas Díaz, José Antonio

A new linear accelerator (Linac4) is being designed to replace its predecessor (Linac2) at CERN. The new Linac4 will double the initial intensity giving an injection energy of up to 160 MeV. It will be an essential component of the LHC (Large Hadron Collider). To assess the quality of the beam, monitoring systems are placed along the beam pipe, being one of them devoted to measure its emittance, the so-called emittance scanner. The measurement of the emittance is important since it constitutes one of the two main parameters that limits the overall LHC performance, being the other parameter the energy of the beam. While the energy level of the beam can be modified during different phases at CERN, the beam emittance cannot; it is determined by the first source that produces the beam. The beam emittance directly influences the amount of particles colliding. For this purpose, the Linac4 emittance scanner will be placed on the very first step of the whole CERN accelerator complex right after the particles sour...

CERN Entrepreneur Mixer | 21 June | Pas perdus

CERN Multimedia

2016-01-01

  CERN Knowledge Transfer group is hosting an Entrepreneur Mixer, an event dedicated to building bridges between CERN innovative entrepreneurs. This will be a unique opportunity to discover business projects initiated by former CERN people, and to see how CERN technology is being exploited by start-up companies. The deadline for registration is Friday, 17 June. For more information, please visit the Indico page of the event: https://indico.cern.ch/event/537167/

France at CERN, 11-14 March 1986. CERN Courier, May 1986, v. 26(4)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1986-05-15

More firms participated in the 1986 'France at CERN' Exhibition than in the previous exhibition in 1983. This year 55 firms, including three Chambers of Commerce and Industry, took part in the exhibition which comprised 34 stands. The choice of firms was approved by the official with responsibility for CERN at the Scientific and Technical Mission of the Ministry of Research and Technology, thereby ensuring that the exhibits corresponded to CERN's immediate needs and in particular to those of LEP.

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

HR Department

2009-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Programme 2008 and places are still available. You may find the full updated Technical Training course programme in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Windows Vista\t(Français)\t30.01\t3 heures ½ EXCEL 2007 level 1: ECDL\t(English)\t02-03.02\t2 days WORD 2007 - level 1 : ECDL\t(English)\t05-06.02\t2 days ACCESS 2007 - Level 1 : ECDL\t(Français)\t09-10.02\t2 jours CERN EDMS – Introduction\t(English)\t10.02\t1 day CERN EDMS – Introduction\t(Français)\t11.02\t1 jour Sharepoint Designer (Frontpage)- Level 1\t(Français)\t12-13.02\t2 jours EXCEL 2007 – Level 2: ECDL\t(Français)\t26-27.02\t2 jours SOFTWARE AND SYSTEM TECHNOLOGIES Oracle – SQL\t(English)\t02-04.02\t3 days Oracle Databases: Memory Management (10g & 11g) (English)\t05-06.02\t2 days JAVA 2 Enterprise Edition – Part 1: Web Applications\t(English)\t09-10.02\t2 days JCOP – Joint PVSS-JCOP Framework\t(English)\t09-13.02\t3 ½ da...

CERN Technical Training: available Places in forthcoming Courses

CERN Multimedia

2008-01-01

The following course sessions are scheduled in the framework of the CERN Technical Training Program 2008 and places are still available. You may find the full updated Technical Training course program in our web-catalogue (http://cta.cern.ch/cta2/f?p=110:9). OFFICE SOFTWARE Excel 2007: Short course III: How to pivot tables (Bilingual)\t01.04\t0.5 day/jour Excel 2007: Short course IV: How to link cells, worksheets and workbooks (Bilingual)\t01.04\t0.5 day/jour CERN EDMS MTF en pratique (Français)\t02.04\t0.5 jour Windows VISTA (Français)\t04.04\t1 jour Sharepoint Collaboration Worskpace\t(Français) 07-08.04\t2 jours CERN EDMS MTF in practice (English)\t09.04\t0.5 day Word 2007 : Niveau 1 ECDL (Français) 10-11.04\t2 jours Indico - Meeting Organization\t(Français)\t18.04\t1 day Indico – Conference Organization\t(Français)\t18.04\t1 day Word 2007: Niveau 2 ECDL\t(Français)\t28-29.04\t2 jours Excel 2007 – Niveau 2 ECDL (Français)\t05-06.05\t2 jours In Design: Introduction (Français)\t13-14.05\t2 jours Sharepoint Col...

CERN in the blogosphere

CERN Multimedia

CERN Bulletin

2011-01-01

CERN communicates with the outside world in many different ways – websites, publications, through the media and via twitter to name but a few. As of January, CERN has a new way of engaging with the world: a CERN institutional blog.   CERN’s blog was launched on 10 January on the Quantum Diaries platform, adding a new strand to a well-established site. Quantum Diaries was launched in 2005 as an initiative for the World Year of Physics promoted by the InterAction collaboration, a group that brings together the communication offices of some of the world’s major particle physics labs and organisations. The launch of institutional blogs from Brookhaven, CERN, Fermilab and TRIUMF has added an extra dimension to Quantum Diaries. Visits to the site jumped to 3000 per day with the addition of the institutional blogs, and that number is already growing. CERN’s first post explains one of the reasons we’re doing this. With the incredible thirst for informati...

CERN apprenticeship scheme honoured

CERN Document Server

2008-01-01

Prestigious awards for two apprentices who did their practical training at CERN. Sylvain Heinzen, apprentice physics lab technician at CERN, receiving his award from Pierre-François UNGER, State Councillor responsible for the Federal Department of the Economy and Health. The other award-winner, Cédric Gerber, is on the right of the photo.Among Geneva’s top apprentices who were honoured by the Fondation sociale de l’Union industrielle genevoise (UIG) on 28 October this year, were two CERN apprentices. Electronics technician Cédric Gerber and physics lab technician Sylvain Heinzen both did their four-year sandwich course at CERN, obtaining their professional qualification, the Certificat fédéral de capacité (CFC), in June. On top of that, Cédric Gerber, who had been a particularly outstanding apprentice, received two further distinctions at the CFC awards ceremony - the State Council prize for achieving one of the top-ten o...

Indian President visits CERN

CERN Multimedia

Katarina Anthony

2011-01-01

On 1 October, her Excellency Mrs Pratibha Devisingh Patil, President of India, picked CERN as the first stop on her official state visit to Switzerland. Accompanied by a host of Indian journalists, a security team, and a group of presidential delegates, the president left quite an impression when she visited CERN’s Point 2!   Upon arrival, Pratibha Patil was greeted by CERN Director General Rolf Heuer, as well as senior Indian scientists working at CERN, and various department directors. After a quick overview of the Organization, Rolf Heuer and the President addressed India’s future collaboration with CERN. India is currently an Observer State of the Organization, and is considering becoming an Associate Member State. A short stop in LHC operations gave Steve Myers and the Accelerator team the opportunity to take the President on a tour through the LHC tunnel. From there, ALICE’s Tapan Nayak and Spokesperson Paolo Giubellino took Pratibha Patil to the experiment&am...

CERN SHOP CHRISTMAS SALE

CERN Multimedia

Visits & Exhibition Service

2000-01-01

Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 12 to Thursday 14 December from 10.00 to 16.00.   Sweat-shirt col zippé, grey, blue, black (M, L, XL) 30.- Sweat-shirt col polo, grey, collar blue (M, L, XL) 30.- T-shirt, black, (M, L, XL) 15.- WWW T-shirt, white, bordeau (M, L, XL) 15.- CERN silk tie (3 colours) 33.- Fancy silk tie (blue, bordeau 25.- Silk scarf (blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- New model of CERN watch 25.- New CERN baseball cap 10.- Antimatter (English/anglais) 30.- The Search for Infinity (French, Italian, English,) 35.- Auf der Suche nach dem Unendlichen 45.- If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs (Shop will be closed at 12.00 on 22.12.).

CERN and space science

CERN Multimedia

2009-01-01

The connection between CERN and space is tangible this week, as former CERN Fellow and ESA astronaut Christer Fuglesang begins the second week of his mission on space shuttle flight STS-128. I had the pleasure to meet Christer back in October 2008 at an IEEE symposium in Dresden, and he asked me whether we could give him something related to CERN for his official flight kit. We thought of caps and tee-shirts, but in the end decided to give him a neutralino as a symbol of the link between particle physics and the science of the Universe. Neutralinos are theoretical particles that the LHC will be looking for, and if they exist, they’re strong candidates for the Universe’s dark matter. Christer’s neutralino is just a model, of course, escaped from the particle zoo, but what better symbol of the connectedness of science? Christer Fuglesang is not the only link CERN has with the space shuttle programme. We’ve recently learned that...

Star spotting at CERN

CERN Multimedia

2008-01-01

This June, two American celebrities (and physics enthusiasts!) came to CERN. Brian Cox gave Mike Einziger (right), lead guitarist with the rock band Incubus, the star treatment in the ATLAS cavern. Jesse Dylan embraces the spirit of ATLAS! Mike Einziger, lead guitarist with the rock band Incubus, visited CERN on Friday 13 June between concerts in Finland and England. Einziger, a lifelong science enthusiast descended into the ATLAS and CMS caverns and visited the SM18 test magnet facility during his brief tour of CERN. Einziger learned about the LHC through watching online lectures from University of Manchester and ATLAS physicist Brian Cox, and was thrilled to have the chance to see the detectors in person. The musician has created an orchestral piece, inspired in part by the work being done at CERN for the LHC, which will have its debut in Los Angeles on 23 August. Just over a week earlier, Jesse Dylan, Hollywood film director a...

CERN anti-fraud policy

CERN Multimedia

2013-01-01

In 2011, a working group on improved fraud prevention and management was established. The group was composed of the Director of Administration and General Infrastructure, the Head of the Human Resources Department, and the Heads of the Legal Service and Internal Audit. It recommended the adoption of a global fraud prevention and management policy.   The global fraud prevention and management policy was implemented through the CERN Anti-Fraud Policy, which was endorsed by the Enlarged Directorate in May 2012 and approved by the Director-General for entry into force on 1 January 2013. The CERN Anti-Fraud Policy defines the Organization’s policy in matters of fraud.  CERN has a zero tolerance approach towards fraud, as it would compromise the accomplishment of its objectives and undermine its functioning, credibility and reputation. The policy also states CERN’s commitment to the prevention, identification and investigation of fraud. All CERN contributors have a key rol...

A new director for Arts@CERN

CERN Multimedia

CERN Bulletin

2015-01-01

On 2 March 2015, Mónica Bello will take the reins of the Arts@CERN programme. A few days before taking over the new job, the curator and art critic talked to the CERN Bulletin about her interest in arts and science, her motivations for the job, and her plans for the future of the programme.   Mónica Bello. “The exciting nature of CERN almost demands an artistic programme like Arts@CERN,” says Mónica, former artistic director of VIDA (one of the most important competitions in digital and new media arts worldwide), who has recently been appointed as the new director of the Arts@CERN programme. “The programme is unique as it provides the artist not only with resources, but also with interesting scientific topics and a natural way for the artists to become involved. Thanks to this programme, artists can come to CERN, bring their individuality, and really benefit from the sharing experience with scientists.” Mónica,...

CERN Confirms commitment to Open Access

CERN Multimedia

2005-01-01

The CERN Library Information desk.At a meeting on the Wednesday before Easter, the Executive Committee endorsed a policy of open access to all the laboratory's results, as expressed in the document ‘Continuing CERN action on Open Access' (http://cds.cern.ch/record/828991/files/open-2005-006.pdf), released by its Scientific Information Policy Board (SIPB) earlier in the month. "This underlines CERN's commitment to sharing the excitement of fundamental research with as wide an audience as possible", said Guido Altarelli, current SIPB chairman. Open Access to scientific knowledge is today the goal of an increasing component of the worldwide scientific community. It is a concept, made possible by new electronic tools, which would bring enormous benefits to all readers by giving them free access to research results. CERN has implicitly supported such moves from its very beginning. Its Convention (http://cds.cern.ch/record/330625/files/cm-p00046871.pdf), adopted in 1953, requires openness, stipulating that "......

Collide@CERN: Horizons Irrésolus

CERN Multimedia

2016-01-01

Sound Installation by Collide@CERN Geneva artists Rudy Decelière and Vincent Hänni in collaboration with physicists Diego Blas and Robert Kieffer, for the Electron Festival 25-27th March, 2016 (see here).   Horizons irrésolus is a sound installation that follows on the artistic residency Collide@CERN 2014.    Registration is absolutely required. Each guest will have to have registered using their own name. Guests without having registered will not be able to come into CERN. Free entrance: Book here  A shuttle will be available every 15 minutes from 6 p.m. until 9 p.m. from CERN Reception (in front of CERN Globe) to the sound art installation. Access from Geneva to CERN Reception by tram 18, end of the line. With the support from The Republic and Canton of Geneva and The City of Geneva. Find out more on the artists and their Geneva 2...

6th IT First Tuesday@CERN

CERN Multimedia

François Grey

2005-01-01

Thursday 12 May, 17:30-19:30, Main Auditorium, CERN Data management in the 21st Century: the Petabyte challenge A Petabyte is a million Gigabytes, the equivalent of over 200,000 DVDs. That may seem like an enormous amount of data, but managing such quantities of data is a reality in the world of science, and is increasingly becoming an imperative in the world of business. This IT First Tuesday@CERN presents the Petabyte challenge, and some of the emerging solutions, from both scientific and commercial perspectives. For CERN's Large Hadron Collider, a Grid solution has been chosen to provide the necessary distributed storage capacity for the anticipated 15 Petabytes of data per year that this collider will produce. IBM is CERN's storage partner in the CERN openlab for DataGrid applications, and is testing the companies innovative TotalStorage SAN distributed filesystem in CERN's demanding IT environment. For Lausanne-based VisioWave, managing stored video data provides an extreme storage challenge. For D...

CERN has a new cultural policy

CERN Multimedia

Katarina Anthony

2010-01-01

A new cultural policy is to be unveiled at the beginning of 2011. Although CERN has been inspiring the works of artists for decades, the new policy represents the first official framework for CERN's engagement with the arts.   Screenshot of the upcoming ARTS@CERN Website. The new cultural policy features four main activities: the creation of an honorary advisory board, the launch of an Artist in Residence programme, support for the various cultural events developed at CERN, and a new website which will showcase CERN’s significant cultural activities and provide relevant information for both artists and people working at CERN. “The new cultural policy shows how much CERN values its significant role in culture,” explains Ariane Koek, the Communication Group’s cultural specialist working on this project. “CERN’s policy is extremely progressive, as it brings together art and science at the same level – Great Arts for Great Sci...

CERN software developers gathering in September

CERN Document Server

Antonella Del Rosso

2015-01-01

Hundreds of developers work on many different projects at CERN – from data analysis to beam operations and administrative applications. As of this September, they will have an opportunity to meet each other at the newly established Developers@CERN Forum.   “We go to conferences elsewhere but we hardly ever meet here at CERN, where we all work on our own separate software projects,” says José Carlos Luna, a member of the IT department and one of the organisers of the first Developers@CERN Forum. Indeed, although several CERN departments have software developers working in their teams, there is no proper “community” built around them. The first Developers@CERN Forum will be held on 28 and 29 September. The event is being organised by a few developers from the IT department, together with colleagues from the GS and EN departments. Its main scope is to reach out to all the departments in an effort to bring all CERN’s software dev...

Full steam ahead for the CERN Accelerator School

CERN Multimedia

2003-01-01

The CERN Accelerator School (CAS), now in its 20th year, has a new head, Daniel Brandt. Here he talks to the Bulletin about the most recent school, which was held in collaboration with the Paul Scherrer Institute (PSI), and about the school's future. The CERN Accelerator School has been running since 1983. It holds training courses for accelerator physicists and engineers twice a year, with a pattern of introductory, intermediate and specialised courses. The courses, which take place in different Member States, consist of a programme of lectures and tutorials spread over a period of one or two weeks. Participants come from Member States and other countries world-wide. This year, CAS has a new head, Daniel Brandt, who has taken over from Ted Wilson. Brandt, an accelerator physicist, has been at CERN since 1981, working on aspects of LEP from the early days of design, and throughout most of its operation. More recently his responsibilities have included the LHC Heavy Ions Programme (Heavy Ions in the LHC). Th...

CERN Technical training: Available places in forthcoming courses

CERN Multimedia

HR Department

2010-01-01

The following course sessions are scheduled in the framework of the 2010 CERN Technical Training Programme and places are still available. You can find the full updated Technical Training course programme in our web catalogue. Software and system technologies ITIL Foundations (version 3) EXAMINATION\t13-DEC-10\t13-DEC-10\tEnglish\t1 hour Electronic design Cours de base Automation du bâtiment\t15-DEC-10\t17-DEC-10\tFrench\t3 jours Office software Sharepoint Collaboration Workspace\t13-DEC-10\t14-DEC-10\tEnglish\t2 days If you are interested in attending any of the above course sessions, please talk to your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found here under ‘Technical Training’ with the detailed course program. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. CERN Technical Training courses are open only to members of the CERN per...

CERN Technical Training: new courses on computer security

CERN Multimedia

HR Department

2009-01-01

Two new trainings are available at CERN concerning computer security. • How to create secure software? The "Developing secure software" course (3.5 hours) is designed for software programmers, both for regular software and Web applications. It covers main aspects of security in different phases of the software development lifecycle. The last, optional hour discusses security issues of Web application developers. This course, although not hands-on, is interactive and full of real-life examples. The first session of this course will take place, in English, on 21 April in the CERN Technical Training Center. More sessions will be scheduled in 2009. • How to safely navigate and send mails? The "Secure e-mail and Web browsing" course is an entry-level 1.5-hour training aimed to show how to detect and avoid typical security pitfalls encountered when e-mailing and browsing the Web. It is designed for non-technical users of Internet Explorer and Outlook. The first sessions o...

Dr Fabiola Gianotti has been selected by CERN Council to become next CERN Director General

CERN Multimedia

Brice, Maximilien

2014-01-01

With the next Director-General announced, watch the press conference starting in a few minutes via http://cern.ch/webcast/ and send your questions via Twitter to @CERNpressoffice CERN Council selects Italian physicist, Dr Fabiola Gianotti, as CERN’s next Director-General. Dr Gianotti’s mandate will begin on 1 January 2016 and run for a period of five years, read more: http://cern.ch/go/tN09F

CERN Summer Student Webfest: a weekend for science and creativity | 29 - 31 July 2016

CERN Multimedia

2016-01-01

Are you passionate about science? Do you like communicating that passion to the general public? Then come along to the CERN Summer Student Webfest on the weekend of 29-31 July! It is a grassroots initiative, open to all, that aims to spark new ideas that could innovate the future of web-based education about CERN, the LHC, particle physics, humanitarian matters and health.   The CERN Summer Student Webfest is a weekend of online web-based creativity modelled on the gatherings (sometimes called hackfests or hackathons) that energize many open-source communities. Participants will work in teams and design neat applications that encourage the public to learn more about science. The projects can range from designing online games for kids to crafting citizen science projects and developing low-cost mobile-phone-based cosmic ray detectors. You do not have to be a software or hardware expert to contribute: many types of skill sets are needed to develop a fun project, from writing and designing ...

Offering Global Collaboration Services beyond CERN and HEP

Science.gov (United States)

Fernandes, J.; Ferreira, P.; Baron, T.

2015-12-01

The CERN IT department has built over the years a performant and integrated ecosystem of collaboration tools, from videoconference and webcast services to event management software. These services have been designed and evolved in very close collaboration with the various communities surrounding the laboratory and have been massively adopted by CERN users. To cope with this very heavy usage, global infrastructures have been deployed which take full advantage of CERN's international and global nature. If these services and tools are instrumental in enabling the worldwide collaboration which generates major HEP breakthroughs, they would certainly also benefit other sectors of science in which globalization has already taken place. Some of these services are driven by commercial software (Vidyo or Wowza for example), some others have been developed internally and have already been made available to the world as Open Source Software in line with CERN's spirit and mission. Indico for example is now installed in 100+ institutes worldwide. But providing the software is often not enough and institutes, collaborations and project teams do not always possess the expertise, or human or material resources that are needed to set up and maintain such services. Regional and national institutions have to answer needs, which are growingly global and often contradict their operational capabilities or organizational mandate and so are looking at existing worldwide service offers such as CERN's. We believe that the accumulated experience obtained through the operation of a large scale worldwide collaboration service combined with CERN's global network and its recently- deployed Agile Infrastructure would allow the Organization to set up and operate collaborative services, such as Indico and Vidyo, at a much larger scale and on behalf of worldwide research and education institutions and thus answer these pressing demands while optimizing resources at a global level. Such services would

21 October 2008 - LHC Inauguration - Canadian Ambassador to Switzerland R. Collette welcomed by CERN Director-General R. Aymar, CERN Chief Scientific Officer J. Engelen and CERN Financial Officer S. Lettow.

CERN Multimedia

CERN Photo Service

2008-01-01

21 October 2008 - LHC Inauguration - Canadian Ambassador to Switzerland R. Collette welcomed by CERN Director-General R. Aymar, CERN Chief Scientific Officer J. Engelen and CERN Financial Officer S. Lettow.

Doing business with CERN: a new website explains everything

CERN Multimedia

CERN Bulletin

2011-01-01

At CERN, procuring all supplies and services is the job of the Procurement and Industrial Services (PI) group of the Finance and Procurement Department. Managing about 30,000 new orders and contracts every year, the Group recently launched a brand-new website where CERN and its external partners can find all the useful information to effectively do business together.   When the Laboratory needs to buy goods or services, the PI group comes into play and makes sure that this happens according to the established rules and procedures. “CERN procures supplies and services and awards orders and contracts in compliance with the principles of transparency and impartiality,” explains Anders Unnervik, Head of Procurement and Industrial Services in the Finance and Procurement Department (FP). “CERN’s tendering procedures are selective but they are designed to guarantee fair competition.” The invitations to tender are, in principle, limited to firms establish...

cernatschool.org's use of CVMFS and the CernVM

CERN Multimedia

CERN. Geneva

2018-01-01

cernatschool.org is a very small Virtual Organisation made up of secondary school and university students, and participating organisations in the Institute for Research in Schools. We use CVMFS to delpoy dependencies and Python 3 itself for custom software used for analysing radiation data from Medipix detectors. This software is designed for running on GridPP worker nodes, part of the UK based distributed computing grid. The cernatschool.org VO also uses the CernVM, for job submission and interacting with the grid. The current use for both CVMFS and the CernVM is for facilitating analysis of 3 years worth of data from the LUCID payload on TechDemoSat-1. The CernVM looks like it could be particularly useful in the future for a standard system for students to use to program and analyse data themselves with, allowing easy access to any software they might need (not necessarily using GridPP compute resources at all).

Neutrinos at CERN

International Nuclear Information System (INIS)

Anon.

1993-01-01

CERN's long and distinguished neutrino tradition began in 1958 at the then new 500 MeV synchrocyclotron (SC) with the first observation of the decay of a charged pion into an electron and a neutrino. At that time, the first ideas on the special (vector/axial vector) structure of the weak interactions had been put forward by Feynman and Gell-Mann and by Marshak and Sudarshan, but the continual non-observation of that charged pion decay was holding up progress. This decay is only one part in ten thousand, and is masked by the dominant muon-neutrino channel. A special telescope was built to pick up the high energy electrons from the pion decay. In 1962 came another SC neutrino success, with the first measurement of the decay of a charged pion into a neutral one, with emission of an electron and a neutrino. Meanwhile the main thrust of CERN's neutrino effort was taking shape at the PS. By the close of 1960, CERN had decided to attack neutrino physics using several detectors - a 1m heavy liquid bubble chamber from Andre Lagarrigue's team in Paris, a CERN 1 m heavy liquid bubble chamber, and a hybrid chamber/counter from a group led by Helmut Faissner

ESO: The CERN Years

CERN Multimedia

Schaeffer, A

2012-01-01

In 1970, CERN and ESO signed a collaboration agreement for the construction of the Observatory’s first telescope. That same year, ESO’s Telescope Division and Sky Atlas laboratory settled on the CERN site in Meyrin. Let’s turn back to the beginnings of this lasting and fruitful alliance.

Integration of CERN staff

CERN Multimedia

CERN PhotoLab

1965-01-01

An example of the integration of CERN staff in the neighbouring communes is provided by the hamlet of Bugnon at St-Genis-Pouilly (Ain), France. The CERN installation on the Swiss site are visible on the left in the background. Behind them the Saleve mountain in Haute-Savoie.

CERN Shop - Christmas Sale 15-17.12.2003

CERN Multimedia

2003-01-01

Looking for Christmas present ideas? Come to the Reception Shop Special Stand: in Meyrin, Main Building, ground floor, from Monday 15 to Wednesday 17 December from 10:30 to 16:00 hrs. CERN Sweat-shirts (M, L, XL) 30.- CERN T-shirt, (M, L, XL) 20.- CERN silk tie (2 colours) 35.- Fancy silk tie (blue, bordeau) 20.- Silk scarf (light blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- Swiss Duo Pack with CERN logo 30.- CERN/Atlas watch 40.- CERN baseball cap 15.- CERN briefcase 15,- Mouse mat 10,- CERN Calendar 5,- Books: - "Antimatter" (English) 35.- - "How the web was born" (English, Italian) 30,- - "The Search for Infinity" (French, Italian, English, German) 40.- - "World of Particles/le monde de particules" 6,- - "Facts and Mysteries" (English) 28,- - "Nucleus" (English) 50,- If you miss this special occasion, the articles are also available at the Reception Shop in Buildin...

France at CERN, 11-14 March 1986. CERN Courier, May 1986, v. 26(4)

International Nuclear Information System (INIS)

Anon.

1986-01-01

More firms participated in the 1986 'France at CERN' Exhibition than in the previous exhibition in 1983. This year 55 firms, including three Chambers of Commerce and Industry, took part in the exhibition which comprised 34 stands. The choice of firms was approved by the official with responsibility for CERN at the Scientific and Technical Mission of the Ministry of Research and Technology, thereby ensuring that the exhibits corresponded to CERN's immediate needs and in particular to those of LEP

The CERN & Society programme launches its newsletter

CERN Multimedia

Matteo Castoldi

2016-01-01

The newsletter will be issued quarterly. Sign up to remain informed about the latest initiatives of the CERN & Society programme!    The CERN & Society programme encompasses projects in the areas of education and outreach, innovation and knowledge exchange, and culture and creativity that spread the CERN spirit of scientific curiosity for the inspiration and benefit of society. The programme is funded primarily by the CERN & Society Foundation, a charitable foundation established by CERN and supported by individuals, trusts, organisations and commercial companies. The projects are inspired or enabled by CERN but lie outside of the Laboratory’s specific research mandate. We especially want to help young talent from around the world to flourish in the future. The programme is now launching its newsletter, which will be issued quarterly. Everybody who wants to be informed about CERN & Society’s activities, stay up-to-date with its latest in...

Academic Training: Joint ILIAS-CAST-CERN Axion Training at CERN