Trapped modes in a dummy extraction septum for CERN Proton Synchrotron

International Nuclear Information System (INIS)

Persichelli, S.

2014-01-01

The term trapped mode is usually referred to a mode that can not propagate in the beam pipe, but is localized in a particular region inside the device, producing narrow resonances peaks in the coupling impedance. They can be excited by the presence of discontinuities inside different devices of an accelerator, producing unwanted beam instabilities. It is therefore important to identify trapped modes, especially for new elements to be installed in a high-intensity accelerator. We present a recent study of the coupling impedance due to trapped modes in a new extraction septum that will be installed in the CERN Proton Synchrotron in the framework of PS Multi-turn extraction (MTE) commissioning. Simulation and theoretical calculations were performed in order to understand performance limitations of the machine, to find cures to reduce the instabilities, and to evaluate beam-induced heating.

Upgrade of the CERN Proton Synchrotron Booster bending magnets for 2 GeV Operation

CERN Document Server

Newborough, A; Chritin, R

2013-01-01

Since its first operation in 1972 at an energy of 800MeV the CERN Proton Synchrotron Booster, which consists of 4 super imposed synchrotrons, has seen two upgrades: once to 1.0 GeV in 1988 and then to 1.4 GeV in 1999. During this time the main magnets of the machine have remained largely unchanged with small differences (<1%) between the inner and outer gaps of the main bending magnet fields being compensated by trim power supplies. The future upgrade of the machine will demand to extract protons at an energy of 2.0 GeV and require almost double the original dipole field. At this field, due to saturation effects, the inner and outer gaps of the main dipole magnets will differ by up to 4%. This paper presents the design and implementation of a modification of the magnetic circuit strongly reducing these effects. We also discuss the results of experimental tests concerning the effects on field quality and eddy current transients, including the implications for the real-time magnetic field measurement system ...

Observation of Octupole Driven Resonance Phenomena with Space Charge at the CERN Proton Synchrotron

CERN Document Server

Métral, E; Martini, M; Steerenberg, R; Franchetti, Giuliano; Hofmann, I

2006-01-01

Several benchmarking space charge experiments have been performed during the last few years in the CERN Proton Synchrotron. These controlled experiments are of paramount importance to validate the present very powerful simulation codes. The observations of the combined effect of space charge and nonlinear resonance on beam loss and emittance, using a single controllable octupole during ~ 1 s at 1.4 GeV kinetic energy, are discussed in some detail in the present paper. By lowering the working point towards the octupolar resonance, a gradual transition from a regime of loss-free core emittance blow-up to a regime of continuous loss was found.

A quadrature frequency converter in a feedback loop of high frequency cavities in the Proton Synchrotron at CERN.

CERN Document Server

Truszczynski, T

This thesis presents the author’s work during the internship at the European Laboratory for Particle Physics (CERN). The quadrature frequency converter is one of the modules that has been developed to upgrade the Proton Synchrotron RF system. Basic information about accelerators, fundamentals of IQ signal representation, mixing and phase shifting techniques are introduced. The development process of the converter is presented with the design details and measurements of the prototype board.

The 400 GeV proton synchrotron

International Nuclear Information System (INIS)

1976-05-01

A general account is given of the 400-GeV proton synchrotron, known as Super Proton Synchrotron (SPS), of the European Organization for Nuclear Research (CERN) at Geneva. A brief chapter on the history of the project covers the steps leading to the earlier plan for a 300-GeV accelerator at a new CERN laboratory elsewhere in Europe, abandoned in 1971 in favour of the present machine, and the progress of construction of the latter. The general features of the SPS design are outlined, illustrated by an aerial view of the CERN site, a plan of the SPS, and interior views of the SPS ring tunnel and main control room. (WSN)

In situ analyses of Ag speciation in tissues of cucumber and wheat using synchrotron-based X-ray absorption spectroscopy

Data.gov (United States)

U.S. Environmental Protection Agency — In situ analyses of Ag speciation in tissues of cucumber and wheat using synchrotron-based X-ray absorption spectroscopy showing spectral fitting and linear...

The control consoles for the CERN 400 GeV proton synchrotron

CERN Document Server

Beck, F; Shering, G

1977-01-01

The European Organization for Nuclear Research (CERN) provides research facilities for investigation into the physics of high energy particles for physicists from 11 European member states and visitors from several continents. To this end it constructs and operates large accelerators, and of these is a 400 GeV proton synchrotron, which is built in a circular tunnel cut into the bedrock, the majority of the equipment being housed in a number of buildings scattered over the surface of the site. Data are gathered in local units, multiplexed into a CAMAC interface, collected into local computers, and sent down high-speed data links to the control centre. Data-collection rates vary from leisurely status changes to megahertz transfer rates on the data links. All links are connected to a message-transfer system in the control centre, as are connections from various central computers giving library, graphics and alarm facilities. The three computers driving the three control consoles are similarly attached to the mes...

Production of radioactivity in local soil at AGS [Alternating Gradient Synchrotron] fast neutrino beam

International Nuclear Information System (INIS)

Gollon, P.J.; Rohrig, N.; Hauptmann, M.G.; McIntyre, K.; Miltenberger, R.; Naidu, J.

1989-10-01

Brookhaven National Laboratory (BNL) has constructed a new neutrino production target station at the Alternating Gradient Synchrotron (AGS). A study has been conducted in the vicinity of the old target area to determine the radiological consequences of operating this experimental facility. Results from all areas of the study are presented along with estimates of the potential environmental impact of the old and new facilities. 12 refs., 15 figs., 3 tabs

DESIGN OF A THIN QUADRUPOLE TO BE USED IN THE AGS SYNCHROTRON

Energy Technology Data Exchange (ETDEWEB)

TSOUPAS,N.; AHRENS, L.; ALFORQUE, R.; BAI, M.; BROWN, K.; COURANT, E.; ET AL.

2007-06-25

The Alternating Gradient Synchrotron (AGS) employs two partial helical snakes[l] to preserve the polarization of the proton beam during acceleration. In order to compensate for the focusing effect of the partial helical snakes on the beam optics in the AGS during acceleration of the beam, we introduced eight quadrupoles in straight sections of the AGS at the proximity of the partial snakes. At injection energies, the strength of each quad is set at a high value, and is ramped down to zero as the effect of the snakes diminishes by the square of beam's rigidity. Four of the eight compensation quadrupoles had to be placed in very short straight sections -30 cm in length, therefore the quadruples had be thin with an overall length of less than 30 cm. In this paper we will discus: (a) the mechanical and magnetic specifications of the ''thin'' quadrupole. (b) the method to minimize the strength of the dodecapole harmonic, (c) the method to optimize the thickness of the laminations that the magnet iron is made, (d) mechanical tolerances of the magnet, (e) comparison of the measured and calculated magnetic multipoles of the quadrupole.

The CERN Super Proton Synchrotron as a tool to study high energy density physics

CERN Document Server

Tahir, N A; Brugger, M; Assmann, R; Shutov, A V; Lomonosov, I V; Piriz, A R; Hoffmann, D H H; Deutsch, C; Fortov3, V E

2008-01-01

An experimental facility named HiRadMat, will be constructed at CERN to study the impact of the 450 GeV c−1 proton beam generated by the Super Proton Synchrotron (SPS) on solid targets. This is designed to study damage caused to the equipment including absorbers, collimators and others in case of an accidental release of the beam energy. This paper presents two-dimensional numerical simulations of target behavior irradiated by the SPS beam. These numerical simulations have shown that the target will be completely destroyed in such an accident, thereby generating high energy density (HED) matter. This study therefore suggests that this facility may also be used for carrying out dedicated experiments to study HED states in matter.

Two-particle correlations in azimuthal angle and pseudorapidity in inelastic p + p interactions at the CERN Super Proton Synchrotron

International Nuclear Information System (INIS)

Aduszkiewicz, A.; Dominik, W.; Kuich, M.; Matulewicz, T.; Posiadala, M.; Walewski, M.; Ali, Y.; Andronov, E.; Feofilov, G.A.; Igolkin, S.; Kondratiev, V.P.; Kovalenko, V.; Merzlaya, A.; Seryakov, A.; Vechernin, V.V.; Vinogradov, L.; Anticic, T.; Kadija, K.; Susa, T.; Antoniou, N.; Christakoglou, P.; Diakonos, F.; Kapoyannis, A.; Panagiotou, A.D.; Vassiliou, M.; Baatar, B.; Brandin, A.; Selyuzhenkov, I.; Taranenko, A.; Bay, F.; Di Luise, S.; Rubbia, A.; Sgalaberna, D.; Blondel, A.; Bravar, A.; Damyanova, A.; Haesler, A.; Korzenev, A.; Ravonel, M.; Bogomilov, M.; Kolev, D.; Tsenov, R.; Brzychczyk, J.; Larsen, D.; Planeta, R.; Richter-Was, E.; Staszel, P.; Wyszynski, O.; Bunyatov, S.A.; Kolesnikov, V.I.; Krasnoperov, A.; Lyubushkin, V.V.; Malakhov, A.I.; Matveev, V.; Melkumov, G.L.; Tereshchenko, V.; Busygina, O.; Golubeva, M.; Guber, F.; Ivashkin, A.; Kurepin, A.; Sadovsky, A.; Cirkovic, M.; Knezevic, N.; Manic, D.; Puzovic, J.; Czopowicz, T.; Grebieszkow, K.; Mackowiak-Pawlowska, M.; Maksiak, B.; Sarnecki, R.; Slodkowski, M.; Tefelska, A.; Tefelski, D.; Davis, N.; Kielbowicz, M.; Ozvenchuk, V.; Rybicki, A.; Dembinski, H.; Engel, R.; Herve, A.E.; Mathes, H.J.; Roth, M.; Szuba, M.; Ulrich, R.; Unger, M.; Veberic, D.; Deveaux, M.; Koziel, M.; Renfordt, R.; Stroebele, H.; Dumarchez, J.; Robert, A.; Ereditato, A.; Hierholzer, M.; Nirkko, M.; Pistillo, C.; Redij, A.; Fodor, Z.; Garibov, A.; Gazdzicki, M.; Grzeszczuk, A.; Kaptur, E.; Kisiel, J.; Kowalski, S.; Pulawski, S.; Schmidt, K.; Wilczek, A.; Hasegawa, T.; Kobayashi, T.; Nakadaira, T.; Nishikawa, K.; Sakashita, K.; Sekiguchi, T.; Shibata, M.; Tada, M.; Hylen, J.; Lundberg, B.; Marchionni, A.; Rameika, R.; Zwaska, R.; Johnson, S.R.; Marino, A.D.; Nagai, Y.; Rumberger, B.T.; Zimmerman, E.D.; Kowalik, K.; Rondio, E.; Stepaniak, J.; Laszlo, A.; Marton, K.; Vesztergombi, G.; Lewicki, M.; Naskret, M.; Turko, L.; Marcinek, A.; Messerly, B.; Paolone, V.; Wickremasinghe, A.; Mills, G.B.; Morozov, S.; Petukhov, O.; Mrowczynski, S.; Rybczynski, M.; Seyboth, P.; Stefanek, G.; Wlodarczyk, Z.; Wojtaszek-Szwarc, A.; Pavin, M.; Popov, B.A.; Rauch, W.; Roehrich, D.; Rustamov, A.; Zambelli, L.

2017-01-01

Results on two-particle ΔηΔφ correlations in inelastic p + p interactions at 20, 31, 40, 80, and 158 GeV/c are presented. The measurements were performed using the large acceptance NA61/SHINE hadron spectrometer at the CERN Super Proton Synchrotron. The data show structures which can be attributed mainly to effects of resonance decays, momentum conservation, and quantum statistics. The results are compared with the Epos and UrQMD models. (orig.)

Two-particle correlations in azimuthal angle and pseudorapidity in inelastic p + p interactions at the CERN Super Proton Synchrotron

Energy Technology Data Exchange (ETDEWEB)

Aduszkiewicz, A.; Dominik, W.; Kuich, M.; Matulewicz, T.; Posiadala, M.; Walewski, M. [University of Warsaw, Warsaw (Poland); Ali, Y. [Jagiellonian University, Cracow (Poland); COMSATS Institute of Information Technology, Islamabad (Pakistan); Andronov, E.; Feofilov, G.A.; Igolkin, S.; Kondratiev, V.P.; Kovalenko, V.; Merzlaya, A.; Seryakov, A.; Vechernin, V.V.; Vinogradov, L. [St. Petersburg State University, St. Petersburg (Russian Federation); Anticic, T.; Kadija, K.; Susa, T. [Ruder Boskovic Institute, Zagreb (Croatia); Antoniou, N.; Christakoglou, P.; Diakonos, F.; Kapoyannis, A.; Panagiotou, A.D.; Vassiliou, M. [University of Athens, Athens (Greece); Baatar, B.; Brandin, A.; Selyuzhenkov, I.; Taranenko, A. [National Research Nuclear University (Moscow Engineering Physics Institute), Moscow (Russian Federation); Bay, F.; Di Luise, S.; Rubbia, A.; Sgalaberna, D. [ETH Zuerich, Zuerich (Switzerland); Blondel, A.; Bravar, A.; Damyanova, A.; Haesler, A.; Korzenev, A.; Ravonel, M. [University of Geneva, Geneva (Switzerland); Bogomilov, M.; Kolev, D.; Tsenov, R. [University of Sofia, Faculty of Physics, Sofia (Bulgaria); Brzychczyk, J.; Larsen, D.; Planeta, R.; Richter-Was, E.; Staszel, P.; Wyszynski, O. [Jagiellonian University, Cracow (Poland); Bunyatov, S.A.; Kolesnikov, V.I.; Krasnoperov, A.; Lyubushkin, V.V.; Malakhov, A.I.; Matveev, V.; Melkumov, G.L.; Tereshchenko, V. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Busygina, O.; Golubeva, M.; Guber, F.; Ivashkin, A.; Kurepin, A.; Sadovsky, A. [Institute for Nuclear Research, Moscow (Russian Federation); Cirkovic, M.; Knezevic, N.; Manic, D.; Puzovic, J. [University of Belgrade, Belgrade (Serbia); Czopowicz, T.; Grebieszkow, K.; Mackowiak-Pawlowska, M.; Maksiak, B.; Sarnecki, R.; Slodkowski, M.; Tefelska, A.; Tefelski, D. [Warsaw University of Technology, Warsaw (Poland); Davis, N.; Kielbowicz, M.; Ozvenchuk, V.; Rybicki, A. [H. Niewodniczanski Institute of Nuclear Physics of the Polish Academy of Sciences, Krakow (Poland); Dembinski, H.; Engel, R.; Herve, A.E.; Mathes, H.J.; Roth, M.; Szuba, M.; Ulrich, R.; Unger, M.; Veberic, D. [Karlsruhe Institute of Technology, Karlsruhe (Germany); Deveaux, M.; Koziel, M.; Renfordt, R.; Stroebele, H. [University of Frankfurt, Frankfurt (Germany); Dumarchez, J.; Robert, A. [LPNHE, University of Paris VI and VII, Paris (France); Ereditato, A.; Hierholzer, M.; Nirkko, M.; Pistillo, C.; Redij, A. [University of Bern, Bern (Switzerland); Fodor, Z. [Wigner Research Centre for Physics of the Hungarian Academy of Sciences, Budapest (Hungary); University of Wroclaw, Wroclaw (Poland); Garibov, A. [National Nuclear Research Center, Baku (Azerbaijan); Gazdzicki, M. [University of Frankfurt, Frankfurt (Germany); Jan Kochanowski University in Kielce, Kielce (Poland); Grzeszczuk, A.; Kaptur, E.; Kisiel, J.; Kowalski, S.; Pulawski, S.; Schmidt, K.; Wilczek, A. [University of Silesia, Katowice (Poland); Hasegawa, T.; Kobayashi, T.; Nakadaira, T.; Nishikawa, K.; Sakashita, K.; Sekiguchi, T.; Shibata, M.; Tada, M. [Institute for Particle and Nuclear Studies, Tsukuba (Japan); Hylen, J.; Lundberg, B.; Marchionni, A.; Rameika, R.; Zwaska, R. [Fermilab, Batavia (United States); Johnson, S.R.; Marino, A.D.; Nagai, Y.; Rumberger, B.T.; Zimmerman, E.D. [University of Colorado, Boulder (United States); Kowalik, K.; Rondio, E.; Stepaniak, J. [National Centre for Nuclear Research, Warsaw (Poland); Laszlo, A.; Marton, K.; Vesztergombi, G. [Wigner Research Centre for Physics of the Hungarian Academy of Sciences, Budapest (Hungary); Lewicki, M.; Naskret, M.; Turko, L. [University of Wroclaw, Wroclaw (Poland); Marcinek, A. [Jagiellonian University, Cracow (Poland); University of Wroclaw, Wroclaw (Poland); Messerly, B.; Paolone, V.; Wickremasinghe, A. [University of Pittsburgh, Pittsburgh (United States); Mills, G.B. [Los Alamos National Laboratory, Los Alamos (United States); Morozov, S.; Petukhov, O. [Institute for Nuclear Research, Moscow (Russian Federation); National Research Nuclear University (Moscow Engineering Physics Institute), Moscow (Russian Federation); Mrowczynski, S.; Rybczynski, M.; Seyboth, P.; Stefanek, G.; Wlodarczyk, Z.; Wojtaszek-Szwarc, A. [Jan Kochanowski University in Kielce, Kielce (Poland); Pavin, M. [Ruder Boskovic Institute, Zagreb (Croatia); LPNHE, University of Paris VI and VII, Paris (France); Popov, B.A. [LPNHE, University of Paris VI and VII, Paris (France); Joint Institute for Nuclear Research, Dubna (Russian Federation); Rauch, W. [Fachhochschule Frankfurt, Frankfurt (Germany); Roehrich, D. [University of Bergen, Bergen (Norway); Rustamov, A. [National Nuclear Research Center, Baku (Azerbaijan); University of Frankfurt, Frankfurt (Germany); Zambelli, L. [LPNHE, University of Paris VI and VII, Paris (France); Institute for Particle and Nuclear Studies, Tsukuba (Japan)

2017-02-15

Results on two-particle ΔηΔφ correlations in inelastic p + p interactions at 20, 31, 40, 80, and 158 GeV/c are presented. The measurements were performed using the large acceptance NA61/SHINE hadron spectrometer at the CERN Super Proton Synchrotron. The data show structures which can be attributed mainly to effects of resonance decays, momentum conservation, and quantum statistics. The results are compared with the Epos and UrQMD models. (orig.)

The CERN Library

CERN Multimedia

Hester, Alec G

1968-01-01

Any advanced research centre needs a good Library. It can be regarded as a piece of equipment as vital as any machine. At the present time, the CERN Library is undergoing a number of modifications to adjust it to the changing scale of CERN's activities and to the ever increasing flood of information. This article, by A.G. Hester, former Editor of CERN COURIER who now works in the Scientific Information Service, describes the purposes, methods and future of the CERN Library.

Transverse beam splitting made operational: Key features of the multiturn extraction at the CERN Proton Synchrotron

Directory of Open Access Journals (Sweden)

A. Huschauer

2017-06-01

Full Text Available Following a successful commissioning period, the multiturn extraction (MTE at the CERN Proton Synchrotron (PS has been applied for the fixed-target physics programme at the Super Proton Synchrotron (SPS since September 2015. This exceptional extraction technique was proposed to replace the long-serving continuous transfer (CT extraction, which has the drawback of inducing high activation in the ring. MTE exploits the principles of nonlinear beam dynamics to perform loss-free beam splitting in the horizontal phase space. Over multiple turns, the resulting beamlets are then transferred to the downstream accelerator. The operational deployment of MTE was rendered possible by the full understanding and mitigation of different hardware limitations and by redesigning the extraction trajectories and nonlinear optics, which was required due to the installation of a dummy septum to reduce the activation of the magnetic extraction septum. This paper focuses on these key features including the use of the transverse damper and the septum shadowing, which allowed a transition from the MTE study to a mature operational extraction scheme.

Experiments at CERN in 1986

International Nuclear Information System (INIS)

1986-11-01

This report is a compilation of the current experimental programme at CERN. The experiments listed are being performed at one of the following machines: The Super Proton Synchrotron, the Proton Synchrotron and the Synchro-Cyclotron. The four experiments planned for the Large Electron Positron machine are also listed. Each experiment is briefly described and a schematic layout of its apparatus is included, together with lists of participants and institutions. (orig./HSI)

Experiments at CERN in 1984

International Nuclear Information System (INIS)

1984-11-01

This book is a compilation of the current experimental program at CERN. The experiments listed are being performed at one of the following machines: the Super Proton Synchrotron (SPS), the Proton Synchrotron (PS) and the Synchro-Cyclotron (SC). The Intersecting Storage Rings (ISR) have ceased functioning early this year. The four approved experiments to be done by means of the Large Electron Positron machine (LEP) are also listed. (orig./HSI)

Design of Injection and Extraction Systems with Optimisation of Lattice and Layout for the CERN PS2 Synchrotron

CERN Document Server

Bartmann, W

2009-01-01

The CERN Proton Synchrotron PS2 is one of the foreseen accelerators for the LHC injector upgrade. This upgrade aims first at increasing the instantaneous luminosity of LHC and second at providing a reliable beam for the CERN accelerator complex. From this aspect, the main characteristics of the PS2 are high reliability for high intensity beams. The goal of this thesis was the design of the machine’s lattice and injection/extraction systems meeting the constraints coming mainly from the LHC beam type but also from beam requirements of experiments at PS2 and the SPS. In the design, the given energy range together with filling schemes for different beam types and RF cogging were first used to define the circumference of the machine. Estimates on the space requirements of injection/extraction systems were made in order to divide the total machine length between arc and long straight section. Existing tunnels for transfer lines together with the minimisation of the total transfer line length favoured a race trac...

Vacuum chambers full of ideas for the Swedish synchrotron

CERN Multimedia

Corinne Pralavorio

2016-01-01

CERN’s Vacuum, Surfaces and Coatings group has contributed to the development of vacuum chambers for the MAX IV synchrotron, which has just been officially opened in Sweden.   A section of the new 3 GeV MAX IV synchrotron at the time of installation. In the centre of the magnets you can see the vacuum chamber developed in collaboration with CERN. (Photo: Marek Grabski, MAX IV Vacuum group) On 21 June, the King and the Prime Minister of Sweden officially opened MAX IV, a brand-new synchrotron in Lund, Sweden. The summer solstice, the longest day of the year, was deliberately chosen for the ceremony: MAX IV, a cutting-edge synchrotron, will deliver the brightest X-rays ever produced to more than 2000 users. Some 1500 kilometres away, a team at CERN followed the opening ceremony with a touch of pride. The Vacuum, Surfaces and Coatings group in the Technology department (TE-VSC) participated in the construction of this new synchrotron. Its contribution lies at the very hea...

First observations of intensity-dependent effects for transversely split beams during multiturn extraction studies at the CERN Proton Synchrotron

Directory of Open Access Journals (Sweden)

Simone Gilardoni

2013-05-01

Full Text Available During the commissioning of the CERN Proton Synchrotron multiturn extraction, tests with different beam intensities were performed in order to probe the behavior of resonance crossing in the presence of possible space charge effects. The initial beam intensity before transverse splitting was varied and the properties of the five beamlets obtained by crossing the fourth-order horizontal resonance were studied. A clear dependence of the beamlets’ parameters on the total beam intensity was found, which is the first direct observation of intensity-dependent effects for such a peculiar beam type. The experimental results are presented and discussed in detail in this paper.

CERN: Neutrino facelift

Energy Technology Data Exchange (ETDEWEB)

Anon.

1991-11-15

With the termination this summer of the CHARM II neutrino experiment at the SPS proton synchrotron, CERN's 30- year tradition of neutrino physics came to a temporary halt. However with these enigmatic particles playing a vital role in today's Standard Model but continually reluctant to give up all their secrets, neutrino physics will continue to be in the forefront of this research.

CERN Heavy-Ion Facility design report

International Nuclear Information System (INIS)

Warner, D.; Angert, N.; Bourgarel, M.P.; Brouzet, E.; Cappi, R.; Dekkers, D.; Evans, J.; Gelato, G.; Haseroth, H.; Hill, C.E.; Hutter, G.; Knott, J.; Kugler, H.; Lombardi, A.; Lustig, H.; Malwitz, E.; Nitsch, F.; Parisi, G.; Pisent, A.; Raich, U.; Ratzinger, U.; Riccati, L.; Schempp, A.; Schindl, K.; Schoenauer, H.; Tetu, P.; Umstaetter, H.H.; Rooij, M. van; Weiss, M.

1993-01-01

The design of the CERN Heavy-Ion Facility is described. This facility will be based on a new ion linear accelerator (Linac 3), together with improvements to the other accelerators of the CERN complex to allow them to cope with heavy ions, i.e. to the Proton Synchrotron Booster (PSB), the Proton Synchrotron (PS) and the Super Proton Synchrotron (SPS). For this reference design, the pure isotope of lead, 208 Pb, is considered. The bulk of the report describes Linac 3, a purpose-built heavy-ion linac mainly designed and constructed in collaboration with several CERN member state laboratories, but also with contributions from non-member states. Modifications and improvements to existing CERN accelerators essentially concern the RF acceleration, beam control and beam monitoring (all machines), beam kickers and septa at the input and output of the PSB, and major vacuum improvements, aiming to reduce the pressure by factors of at least seven and three in the PSB and PS respectively. After injection from the Electron Cyclotron Resonance source at 2.5 keV/u the partially stripped heavy-ion beam is accelerated successively by a Radio Frequency Quadrupole and an Interdigital-H linac to 4.2 MeV/u. After stripping to 208 Pb 53+ , the beam is again accelerated, firstly in the PSB (to 98.5 MeV/u), then in the PS (to 4.25 GeV/u). The final stage of acceleration in the SPS takes the fully stripped 208 Pb 82+ ions to 177 GeV/u, delivering a beam of 4.10 8 ions per SPS supercycle (15.2 s) to the experiments. The first physics run with lead ions is scheduled for the end of 1994. Finally, some requirements for carrying out heavy-ion physics at the Large Hadron Collider are mentioned. (orig.)

The history of CERN during the early 1950s

International Nuclear Information System (INIS)

Amaldi, E.

1989-01-01

This paper, written by CERN's first secretary general, looks at the history of CERN, the first example of an intergovernmental research laboratory created in Europe, which has now been operating successfully for more than thirty years. Three distinct periods of development are identified. Early initiatives sprang from a growing sense of European union, and a desire to gain the benefits of collaboration in scale, that United States examples such as Brookhaven National Laboratory had offered. The first big project was to build a 10GeV proton-synchrotron, at that time the largest in the world. The middle era corresponds to the establishment of the organization, with personnel assembling, and buildings and plant coming on line. In October 1954, with Felix Bloch as its director general, CERN entered its final permanent form. The synchrocyclotron operated in 1958 and a proton beam circulated in the proton-synchrotron in November 1959. (UK)

PERFORMANCE ANALYSIS OF MULTI-TURN EXTRACTION FROM THE PROTON SYNCHROTRON TO THE SUPER PROTON SYNCHROTRON

CERN Document Server

Abernethy, Samuel

2016-01-01

Within CERN's accelerator complex, the extraction from the Proton Synchrotron to the Super Proton Synchrotron has been done using the so-called ``Continuous Transfer" (CT) method since the 1970's. A new technique, known as Multi-Turn Extraction (MTE), has now been implemented and is in full operation. This report examines a holistic performance analysis of the novel technique in multiple aspects of the accelerator complex, as well as a direct comparison with its predecessor, CT, from the implementation of MTE in 2010 until the end of 2015.

CERN: Neutrino facelift

International Nuclear Information System (INIS)

Anon.

1991-01-01

With the termination this summer of the CHARM II neutrino experiment at the SPS proton synchrotron, CERN's 30- year tradition of neutrino physics came to a temporary halt. However with these enigmatic particles playing a vital role in today's Standard Model but continually reluctant to give up all their secrets, neutrino physics will continue to be in the forefront of this research

In situ thermal residual stress evolution in ultrathin ZnO and Ag films studied by synchrotron x-ray diffraction

Energy Technology Data Exchange (ETDEWEB)

Renault, P.O., E-mail: Pierre.olivier.renault@univ-poitiers.fr [Institut P' , CNRS, Universite de Poitiers, UPR 3346, 86962 Futuroscope (France); Krauss, C.; Le Bourhis, E.; Geandier, G. [Institut P' , CNRS, Universite de Poitiers, UPR 3346, 86962 Futuroscope (France); Benedetto, A. [Saint-Gobain Recherche (SGR), 93303 Aubervilliers (France); Grachev, S.Y.; Barthel, E. [Lab. Surface du Verre et Interfaces (SVI), UMR-CNRS 125, 93303 Aubervilliers (France)

2011-12-30

Residual-stress evolution in sputtered encapsulated ZnO/Ag/ZnO stack has been studied in-situ by synchrotron x-ray diffraction when heat treated. The ZnO/Ag/ZnO stack encapsulated into Si{sub 3}N{sub 4} layers and deposited on (001) Si substrates was thermally heated from 25 Degree-Sign C to 600 Degree-Sign C and cooled down to 25 Degree-Sign C. X-ray diffraction 2D patterns captured continuously during the heat treatment allowed monitoring the diffraction peak shifts of both Ag (15 nm thick) and ZnO (10 nm and 50 nm thick) sublayers. Due to the mismatch between the coefficients of thermal expansion, the silicon substrate induced compressive thermal stresses in the films during heating. We first observed a linear increase of the compressive stress state in both Ag and ZnO films and then a more complex elastic-stress evolution starts to operate from about 100 Degree-Sign C for Ag and about 250 Degree-Sign C for ZnO. Thermal contraction upon cooling seems to dominate so that the initial compressive film stresses relax by about 300 and 700 MPa after thermal treatment for ZnO and Ag, respectively. The overall behavior is discussed in terms of structural changes induced by the heat treatment.

Aerial view of CERN under the snow

CERN Multimedia

CERN PhotoLab

1963-01-01

In this photograph taken in the winter of 1963, CERN still looks quite bare under its mantle of snow. The Proton Synchrotron (PS), resembling a bicycle wheel in shape, had been in operation since the summer of 1959. A proposal had just been made for the site of CERN's second large project, the Intersecting Storage Rings (ISR): France was to house the world's first proton-proton collider. In September 1965, the French authorities signed an agreement making more than 40 hectares of land available for the extension of the CERN site established in Switzerland into French territory. The ISR project received final approval from the CERN Council in December 1965. The civil engineering work on the French part began in November 196

Beam measurement of the high frequency impedance sources with long bunches in the CERN Super Proton Synchrotron

Directory of Open Access Journals (Sweden)

A. Lasheen

2018-03-01

Full Text Available Microwave instability in the Super Proton Synchrotron (SPS at CERN is one of the main limitations to reach the requirements for the High Luminosity-LHC project (increased beam intensity by a factor 2. To identify the impedance source responsible of the instability, beam measurements were carried out to probe the SPS impedance. The method presented in this paper relies on measurements of the unstable spectra of single bunches, injected in the SPS with the rf voltage switched off. The modulation of the bunch profile gives information about the main impedance sources driving microwave instability, and is compared to particle simulations using the SPS impedance model to identify the most important contributions. This allowed us to identify the vacuum flanges as the main impedance source for microwave instability in the SPS, and to evaluate possible missing impedance sources.

Beam measurement of the high frequency impedance sources with long bunches in the CERN Super Proton Synchrotron

Science.gov (United States)

Lasheen, A.; Argyropoulos, T.; Bohl, T.; Esteban Müller, J. F.; Timko, H.; Shaposhnikova, E.

2018-03-01

Microwave instability in the Super Proton Synchrotron (SPS) at CERN is one of the main limitations to reach the requirements for the High Luminosity-LHC project (increased beam intensity by a factor 2). To identify the impedance source responsible of the instability, beam measurements were carried out to probe the SPS impedance. The method presented in this paper relies on measurements of the unstable spectra of single bunches, injected in the SPS with the rf voltage switched off. The modulation of the bunch profile gives information about the main impedance sources driving microwave instability, and is compared to particle simulations using the SPS impedance model to identify the most important contributions. This allowed us to identify the vacuum flanges as the main impedance source for microwave instability in the SPS, and to evaluate possible missing impedance sources.

Speech to be delivered by Mr. François de Rose, president of Council of the european organization for nuclear research on the occasion of the inauguration of the CERN proton synchrotron on 5 february 1960

CERN Multimedia

CERN Press Office. Geneva

1960-01-01

Speech to be delivered by Mr. François de Rose, president of Council of the european organization for nuclear research on the occasion of the inauguration of the CERN proton synchrotron on 5 february 1960

Evaluation of the CERN Super Proton Synchrotron longitudinal impedance from measurements of the quadrupole frequency shift

Directory of Open Access Journals (Sweden)

A. Lasheen

2017-06-01

Full Text Available Longitudinal instabilities are one of the main limitations in the CERN Super Proton Synchrotron (SPS to reach the beam parameters required for the High Luminosity LHC project. In preparation to the SPS upgrade, possible remedies are studied by performing macroparticle simulations using the machine impedance model obtained from electromagnetic simulations and measurements. To benchmark the impedance model, the results of simulations are compared with various beam measurements. In this study, the reactive part of the impedance was probed by measuring the quadrupole frequency shift with intensity, obtained from bunch length oscillations at mismatched injection into the SPS. This method was applied over many last years to follow up the evolution of the SPS impedance, injecting bunches with the same bunch length. A novel approach, giving significantly more information, consists in varying the injected bunch length. The comparison of these measurements with macroparticle simulations allowed us to test the existing model, identify some missing SPS impedance and to obtain its possible dependence on frequency.

Has CERN made the stuff of the newborn universe?

CERN Multimedia

Taubes, G

1997-01-01

Researchers at CERN report indications that they have recreated quark-gluon plasma in their Super Proton Synchrotron particle accelerator. The evidence involves the disappearance of of J/psi particles in lead-lead collisions.

Princess of Thailand returns to CERN

CERN Multimedia

Stefania Pandolfi

2015-01-01

On Tuesday, 17 November 2015, HRH Princess Maha Chakri Sirindhorn of Thailand visited CERN. Princess Sirindhorn was visiting the Laboratory for the fifth time, following her last visit in 2010.   Princess Maha Chakri Sirindhorn of Thailand (center) witnesses the signing of the collaboration agreement between CERN and SLRI, represented by Rolf Heuer (right) and Professor Sarawut Sujitjorn (left) respectively. The Princess was accompanied by a delegation that included the Director of the Synchrotron Light Research Institute (SLRI) in Thailand, Professor Sarawut Sujitjorn, and a large group of Thailand’s Diplomatic Representatives in Switzerland. Upon her arrival, Princess Sirindhorn was welcomed by CERN Director-General Rolf Heuer and the Director-General Designate, Fabiola Gianotti. At CERN, the Princess was given a brief update on the Laboratory’s activities since her last visit, in April 2010. Later on, she witnessed the signature of the f...

Accelerator design and construction in the 1950s

International Nuclear Information System (INIS)

Blewett, J.P.

1989-01-01

This article looks into the history of the design, construction and operation of four of the large particle accelerators of the 1950s, the Cosmotron and more powerful alternating-gradient synchrotron (AGS) at Brookhaven, the Bevatron at Berkeley and the CERN proton synchrotron in Geneva with which the author was involved. The author's own contribution was in magnet design for the Cosmotron and the radiofrequency accelerating system. He later worked on linear accelerators and strong focusing later used in the AGS with Nick Christofilos from Athens. Collaboration between CERN and Brookhaven continued following a British study of alternating-gradient focusing which showed up possible resonance problems. In 1953, the ''phase transition'' problem was overcome. The author's personal contribution to the AGS project completes the article. (UK)

Experiments at CERN in 1977

International Nuclear Information System (INIS)

1977-08-01

This report catalogues approved experiments at CERN and has been compiled as a guide to the status of the experimental research programme at the 400 GeV Proton Synchrotron (SPS), the Intersecting Storage Rings (ISR), the 25 GeV Proton Synchrotron (PS) and the Synchro-Cyclotron (SC). The schematic layouts of beams and experiments at the various machines are given in the beginning of the report and are followed by descriptive material on the experiments. In general, a short summary of each of the approved experiments is given with a description of the physics purpose, the apparatus employed, a list of the participants and the name of the collaboration. (Auth.)

Experiments at CERN in 1979

International Nuclear Information System (INIS)

Anon.

1979-08-01

The 1979 catalogue of approved experiments at CERN has been compiled as a guide to the status of the experimental research programme at the 400 GeV Proton Synchrotron (SPS), the Intersecting Storage Rings (ISR), the 25 GeV Proton Synchrotron (PS), and the Synchrocyclotron (SC). The schematic layouts of beams and experiments at the various machines are given in the beginning of the report and are followed by descriptive material on the experiments. In general, a short summary of each of the approved experiments is given, with a description of the physics purpose, the apparatus employed, a list of the participants and the name of the collaboration. (Auth.)

FPGA Design of the digital acquisition chain to test and implement ALPS, the new Beam Position Monitor for the Super Proton Synchrotron at CERN

CERN Document Server

Degl'Innocenti, Irene; Boccardi, Andrea

This thesis presents the firmware design and the data analysis to test and implement part of the acquisition chain of ALPS (A Logarithmic Position Monitor), the new beam position monitor of the Super Proton Synchrotron (SPS) at CERN, the European Organization for Nuclear Research. CERN provides particle accelerators and detectors to accelerate beams of particles and observe their collisions and the SPS is the second larger circular machine in the accelerator complex. The SPS beam position monitor, the system that measures the transverse position of the accelerated particle beams along the pipe, is now under redesign. In the BPM acquisition chain the signal from the sensor is first conditioned by the analog front-end, then digitalised in the digital front-end and transmitted to the back-end for being processed. The goal of the thesis is the conception of firmware modules and analysis tools integrated with the acquisition chain, aiming to acquire and analyse data to qualify the system and finally implement ...

Optics Studies for the CERN Proton Synchrotron Machine Linear and Nonlinear Modelling using Beam Based Measurements

CERN Document Server

Cappi, R; Martini, M; Métral, Elias; Métral, G; Steerenberg, R; Müller, A S

2003-01-01

The CERN Proton Synchrotron machine is built using combined function magnets. The control of the linear tune as well as the chromaticity in both planes is achieved by means of special coils added to the main magnets, namely two pole-face-windings and one figure-of-eight loop. As a result, the overall magnetic field configuration is rather complex not to mention the saturation effects induced at top-energy. For these reasons a linear model of the PS main magnet does not provide sufficient precision to model particle dynamics. On the other hand, a sophisticated optical model is the key element for the foreseen intensity upgrade and, in particular, for the novel extraction mode based on adiabatic capture of beam particles inside stable islands in transverse phase space. A solution was found by performing accurate measurement of the nonlinear tune as a function of both amplitude and momentum offset so to extract both linear and nonlinear properties of the lattice. In this paper the measurement results are present...

GPS Precision Timing at CERN

CERN Document Server

Beetham, C G

1999-01-01

For the past decade, the Global Positioning System (GPS) has been used to provide precise time, frequency and position co-ordinates world-wide. Recently, equipment has become available specialising in providing extremely accurate timing information, referenced to Universal Time Co-ordinates (UTC). This feature has been used at CERN to provide time of day information for systems that have been installed in the Proton Synchrotron (PS), Super Proton Synchrotron (SPS) and the Large Electron Positron (LEP) machines. The different systems are described as well as the planned developments, particularly with respect to optical transmission and the Inter-Range Instrumentation Group IRIG-B standard, for future use in the Large Hadron Collider (LHC).

The CERN neutrino beam to Gran Sasso (NGS). Conceptual technical design

Energy Technology Data Exchange (ETDEWEB)

Elsener, K [ed.; Acquistapace, G; Baldy, J L; Ball, A E; Bonnal, P; Buhler-Broglin, M; Carminati, F; Cennini, E; Ereditato, A; Falaleev, V; Faugeras, P; Ferrari, A; Foa, L; Fortuna, G; Genand, R; Grant, A L; Henny, L; Hilaire, A; Huebner, K; Inigo-Golfin, J; Kissler, K H; Lopez-Hernandez, L A; Maugain, J M; Mayoud, M; Migliozzi, P; Missiaen, D; Palladino, V; Papadopoulos, I M; Peraire, S; Pietropaolo, F; Rangod, S; Revol, J P; Roche, J; Sala, P; Sanelli, C; Stevenson, G R; Tomat, B; Tsesmelis, E; Valbuena, R; Vincke, H; Weisse, E; Wilhelmsson, M

1998-05-19

The conceptual design of a new neutrino facility at CERN is presented. Starting with 400 GeV/c protons from the Super Proton Synchrotron (SPS), a neutrino beam is produced which is directed towards the underground Gran Sasso Laboratory in Italy, 732 km away from CERN, where large, complex detectors will allow long-baseline experiments searching for neutrino oscillation phenomena to be performed. (orig.)

The CERN neutrino beam to Gran Sasso (NGS). Conceptual technical design

International Nuclear Information System (INIS)

Elsener, K.; Acquistapace, G.; Baldy, J.L.; Ball, A.E.; Bonnal, P.; Buhler-Broglin, M.; Carminati, F.; Cennini, E.; Ereditato, A.; Falaleev, V.; Faugeras, P.; Ferrari, A.; Foa, L.; Fortuna, G.; Genand, R.; Grant, A.L.; Henny, L.; Hilaire, A.; Huebner, K.; Inigo-Golfin, J.; Kissler, K.H.; Lopez-Hernandez, L.A.; Maugain, J.M.; Mayoud, M.; Migliozzi, P.; Missiaen, D.; Palladino, V.; Papadopoulos, I.M.; Peraire, S.; Pietropaolo, F.; Rangod, S.; Revol, J.P.; Roche, J.; Sala, P.; Sanelli, C.; Stevenson, G.R.; Tomat, B.; Tsesmelis, E.; Valbuena, R.; Vincke, H.; Weisse, E.; Wilhelmsson, M.

1998-01-01

The conceptual design of a new neutrino facility at CERN is presented. Starting with 400 GeV/c protons from the Super Proton Synchrotron (SPS), a neutrino beam is produced which is directed towards the underground Gran Sasso Laboratory in Italy, 732 km away from CERN, where large, complex detectors will allow long-baseline experiments searching for neutrino oscillation phenomena to be performed. (orig.)

First shipment of magnets from CERN to SESAME

CERN Multimedia

CERN Bulletin

2015-01-01

On Monday, 19 October, CERN will bid a fond farewell to two containers of magnets. Their destination: SESAME, the synchrotron light source under construction in Jordan.   The SESAME magnets, ready for transport. The containers hold 31 sextupoles, produced in Cyprus and France, and 32 quadrupoles, produced in Spain and Turkey. The magnets will rejoin 8 dipoles (from the UK) that are already at SESAME. The quadrupoles and sextupoles were checked and measured at CERN before this shipment, while the dipoles went via the ALBA synchrotron, near Barcelona, where magnetic measurements were carried out. With this shipment, around 50% of the magnets for the SESAME storage ring will have been delivered. The containers are expected to arrive just in time for the upcoming SESAME Council meeting at the end of November. The rest of the magnets – as well as all the power supplies and related control modules – have been produced and will be delivered to SESAME at th...

Study of an energy upgrade of the CERN PS Booster

CERN Document Server

Hanke, K; Angoletta, M E; Bartmann, W; Bartolome, S; Bertone, C; Blas, A; Borburgh, J; Bozzini, D; Butterworth, A; Carli, C; Dahlen, P; Dobers, T; Findlay, A; Folch, R; Gilbert, N; Hansen, J; Hermanns, T; Jensen, S; Le Roux, P; Lopez-Hernandez, L A; Mahner, E; Masi, A; Mikulec, B; Muttoni, Y; Newborough, A; Nisbet, D; Nonis, M; Olek, S; Paoluzzi, M; Pittet, S; Puccio, B; Raginel, V; Ruehl, I; Tan, J; Todd, B; Weterings, W; Widorski, W

2011-01-01

CERN’s LHC injector chain will have to deliver beams with ultimate brilliance as the LHC is heading for increased luminosity in the coming years. In order to overcome bottlenecks in the injector chain, an increase of the beam transfer energy from the CERN Proton Synchrotron Booster (PSB) to the Proton Synchrotron (PS) has been investigated as a possible upgrade scenario. This paper gives an overview of the technical solutions and summarizes the conclusions of the feasibility study.

The MedAustron Project at CERN, Status Report, May 2013

CERN Document Server

Benedikt, M; Gutleber, J

2013-01-01

MedAustron is a light ion-therapy and research centre based on a synchrotron accelerator complex under construction in Austria. It is the first large-scale accelerator facility in Austria. For the implementation of the required accelerator technologies, the county of Lower Austria and the company EBG MedAustron have set up dedicated agreements with CERN. These cover the assistance of CERN for the design and manufacturing follow-up of accelerator components and training of MedAustron personnel. CERN contributed to the MedAustron construction in particular by providing domain expertise, infrastructure, and manpower in relation with the design, the tendering and procurement processes.\

Comparison of the performance of different instruments in the stray neutron field around the CERN Proton Synchrotron.

Science.gov (United States)

Aza, Eleni; Caresana, Marco; Cassell, Christopher; Colombo, Valeria; Damjanovic, Sanja; Gilardoni, Simone; Manessi, Giacomo Paolo; Pangallo, Michel; Perrin, Daniel; Silari, Marco

2014-10-01

This paper discusses an intercomparison campaign carried out in several locations around the CERN Proton Synchrotron. The locations were selected in order to perform the measurements in different stray field conditions. Various neutron detectors were employed: ionisation chambers, conventional and extended range rem counters, both commercial and prototype ones, including a novel instrument called LUPIN, specifically conceived to work in pulsed fields. The attention was focused on the potential differences in the instrument readings due to dead-time losses that are expected to affect most commercial units. The results show that the ionisation chambers and LUPIN agree well with the expected H*(10) values, as derived from FLUKA simulations, showing no relevant underestimations even in strongly pulsed fields. On the contrary, the dead-time losses of the other rem counters induced an underestimation in pulsed fields that was more important for instruments characterised by a higher dead time. © The Author 2013. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

CAS CERN Accelerator School second advanced accelerator physics course

International Nuclear Information System (INIS)

Turner, S.

1989-01-01

The advanced course on general accelerator physics given in West Berlin closely followed that organised by the CERN Accelerator School at Oxford in September 1985 and whose proceedings were published as CERN Yellow Report 87-03 (1987). However, certain subjects were treated in a different way, improved or extended, while some new ones were introduced and it is all of these which are included in the present proceedings. The lectures include particle-photon interactions, high-brilliance lattices and single/multiple Touschek effect, while the seminars are on the major accelerators presently under construction or proposed for the near future, applications of synchrotron radiation, free-electron lasers, cosmic accelerators and crystal beams. Also included are errata, and addenda to some of the lectures, of CERN 87-03. (orig.)

AGS Spallation Target Experiment (ASTE) Collaboration

International Nuclear Information System (INIS)

Oyama, Yukio

1999-01-01

An experiment on mercury spallation target with high energy proton beam, called as the AGS Spallation Target Experiment (ASTE) Collaboration, has been performed at Alternating Gradient Synchrotron (AGS) of Brookhaven National Laboratory (BNL) in USA, in cooperation among the laboratories in Japan, Europe and USA. The experimental setup, scope and preliminary results are presented in the paper. (author)

People and things. CERN Courier, Nov 1991, v. 31(9)

International Nuclear Information System (INIS)

Anon.

1991-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: ; Following the initial acceleration of protons to 48 0 GeV on 8 October in the superconducting proton ring of the 6.3-kilometre HERA electron-proton collider at the DESY Laboratory, Hamburg, on 19 October the first electron-proton collisions occurred.; In September, an electron beam reached 3 GeV in the booster synchrotron of the European Synchrotron Radiation Facility (ESRF), Grenoble. ; The CERN Accelerator School (CAS) programme for 1992 includes courses on Magnetic Measurement and Alignment, to be held in Montreux, Switzerland, from 16- 20 March.; A Workshop on Pulsed Advanced Neutron Sources for Physics looked at the targetmoderator system required for the SIN-45 intense pulsed neutron source based on the proton beam of the kaon factory planned for the Academy's Institute for Nuclear Research

People and things. CERN Courier, Nov 1991, v. 31(9)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1991-11-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: ; Following the initial acceleration of protons to 48 0 GeV on 8 October in the superconducting proton ring of the 6.3-kilometre HERA electron-proton collider at the DESY Laboratory, Hamburg, on 19 October the first electron-proton collisions occurred.; In September, an electron beam reached 3 GeV in the booster synchrotron of the European Synchrotron Radiation Facility (ESRF), Grenoble. ; The CERN Accelerator School (CAS) programme for 1992 includes courses on Magnetic Measurement and Alignment, to be held in Montreux, Switzerland, from 16- 20 March.; A Workshop on Pulsed Advanced Neutron Sources for Physics looked at the targetmoderator system required for the SIN-45 intense pulsed neutron source based on the proton beam of the kaon factory planned for the Academy's Institute for Nuclear Research.

CERN accelerator school: Antiprotons for colliding beam facilities

International Nuclear Information System (INIS)

Bryant, P.; Newman, S.

1984-01-01

This is a specialized course which addresses a wide spectrum of theoretical and technological problems confronting the designer of an antiproton facility for high-energy-physics research. A broad and profound basis is provided by the lecturers' substantial experience gained over many years with CERN's unique equipment. Topics include beam optics, special lattices for antiproton accumulation and storage rings, antiproton production, stochastic cooling, acceleration and storage, r.f. noise, r.f. beam manipulations, beam-beam interaction, beam stability due to ion accumulation, and diagnostics. The SPS (Super Proton Synchrotron) panti p collider, LEAR (the Low Energy Antiproton Ring at CERN), antiprotons in the ISR (Intersecting Storage Rings), the new antiproton collector (ACOL) and gas jet targets are also discussed. A table is included listing the parameters of all CERN's accelerators and storage rings. See hints under the relevant topics. (orig./HSI)

Performances of BNL high-intensity synchrotrons

International Nuclear Information System (INIS)

Weng, W.T.

1998-03-01

The AGS proton synchrotron was completed in 1960 with initial intensity in the 10 to the 10th power proton per pulse (ppp) range. Over the years, through many upgrades and improvements, the AGS now reached an intensity record of 6.3 x 10 13 ppp, the highest world intensity record for a proton synchrotron on a single pulse basis. At the same time, the Booster reached 2.2 x 10 13 ppp surpassing the design goal of 1.5 x 10 13 ppp due to the introduction of second harmonic cavity during injection. The intensity limitation caused by space charge tune spread and its relationship to injection energy at 50 MeV, 200 MeV, and 1,500 MeV will be presented as well as many critical accelerator manipulations. BNL currently participates in the design of an accumulator ring for the SNS project at Oak Ridge. The status on the issues of halo formation, beam losses and collimation are also presented

On the polarized beam acceleration in medium energy synchrotrons

International Nuclear Information System (INIS)

Lee, S.Y.

1992-01-01

This lecture note reviews physics of spin motion in a synchrotron, spin depolarization mechanisms of spin resonances, and methods of overcoming the spin resonances during acceleration. Techniques used in accelerating polarized ions in the low/medium energy synchrotrons, such as the ZGS, the AGS, SATURNE, and the KEK PS and PS Booster are discussed. Problems related to polarized proton acceleration with snakes or partial snake are also examined

On the polarized beam acceleration in medium energy synchrotrons

Energy Technology Data Exchange (ETDEWEB)

Lee, S.Y.

1992-12-31

This lecture note reviews physics of spin motion in a synchrotron, spin depolarization mechanisms of spin resonances, and methods of overcoming the spin resonances during acceleration. Techniques used in accelerating polarized ions in the low/medium energy synchrotrons, such as the ZGS, the AGS, SATURNE, and the KEK PS and PS Booster are discussed. Problems related to polarized proton acceleration with snakes or partial snake are also examined.

Measurements of hyperon semileptonic decays at the CERN Super Proton Synchrotron I The Sigma ^{-} to Lambda e^{-} nu decay mode

CERN Document Server

Bourquin, M; Chatelus, Y; Chollet, J C; Degré, A; Froidevaux, D; Fyfe, A R; Gaillard, J M; Gee, C N P; Gibson, W M; Gray, R J; Igo-Kemenes, P; Jeffreys, P W; Merkel, B; Morand, R; Ott, R J; Plothow, H; Repellin, J P; Saunders, B J; Sauvage, G; Schiby, B; Siebert, H W; Smith, V J; Streit, K P; Strub, R; Thresher, J J

1982-01-01

The charged hyperon beam at the CERN Super Proton Synchrotron (SPS) has been used to collect data on semileptonic decays of Sigma ^{-}, Xi ^{-} and Lambda . A magnetic channel selects 100 GeV/c negatively charged particles produced in the forward direction by interaction of the 200 GeV/c SPS proton beam on a BeO target. The Sigma ^{-} and Xi ^{-} hyperons are concurrently identified in a DISC Cernekov counter, and their decay products are analysed by a magnetic spectrometer. Electron-hadron discrimination is achieved by the combined use of lead-glass and lead/scintillator counters, transition radiation detectors, and a Cerenkov counter. The authors report results on the Sigma ^{-} to Lambda e^{-} nu decay mode. Measurements of the GL polarization and of the centre-of-mass distributions (baryon kinetic energy, electron-neutrino correlation, and Dalitz plot distributions) yield the vector to axial-vector form factor ratio f/sub 1//g/sub 1/=+0.034+or-0.080, in agreement with the value expected from the conserved...

People and things. CERN Courier, Jan-Feb 1988, v. 28(1)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1988-01-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The CERN history project yielded its first fruits a year ago with the publication of a volume covering the years of the creation of CERN. 17 November brought together many of the leading figures from the second period under study – covering the construction and first operation of the proton synchrotron through to the end of 1965 when the intersecting storage rings were authorized. The 3rd ESO/CERN Symposium on Cosmology, Astronomy and Fundamental Physics will be held at the Palazzo Re Enzo, Bologna (Italy) from 16 to 20 May. New annual event, the next CERN Computing School will be in Oxford, UK, from 14-27 August: The programme covers software engineering, document preparation, communications and networks, hardware, data acquisition, computer-aided electronics design etc.

People and things. CERN Courier, Jan-Feb 1988, v. 28(1)

International Nuclear Information System (INIS)

Anon.

1988-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The CERN history project yielded its first fruits a year ago with the publication of a volume covering the years of the creation of CERN. 17 November brought together many of the leading figures from the second period under study – covering the construction and first operation of the proton synchrotron through to the end of 1965 when the intersecting storage rings were authorized. The 3rd ESO/CERN Symposium on Cosmology, Astronomy and Fundamental Physics will be held at the Palazzo Re Enzo, Bologna (Italy) from 16 to 20 May. New annual event, the next CERN Computing School will be in Oxford, UK, from 14-27 August: The programme covers software engineering, document preparation, communications and networks, hardware, data acquisition, computer-aided electronics design etc

People and things. CERN Courier, Oct 1979, v. 19(7)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1979-10-15

The article describes achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates: The booster of the Synchrotron Radiation Source under construction at Daresbury Laboratory is in operation and already providing electron beams that would be adequate to fill the storage ring in a few minutes.

People and things. CERN Courier, Oct 1979, v. 19(7)

International Nuclear Information System (INIS)

Anon.

1979-01-01

The article describes achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates: The booster of the Synchrotron Radiation Source under construction at Daresbury Laboratory is in operation and already providing electron beams that would be adequate to fill the storage ring in a few minutes

The European 400 GeV proton synchrotron

CERN Document Server

Middelkoop, Willem Cornelis

1977-01-01

On 19th February 1971, CERN decided to build a super proton synchrotron at a cost of 1150*10/sup 6/ Swiss francs. The design target of 400 GeV with a beam intensity of 10/sup 13/ protons/pulse was reached on the 4th of November 1976 within the original budget, allowing for inflation. The technical aspects of the SPS are reviewed, together with operating experience since May 1976. (2 refs).

Experiments at CERN in 1997

International Nuclear Information System (INIS)

1997-11-01

This book summarises the current experimental programme at CERN. The experiments listed are taking place at one of the following machines: the Large Electron Positron Collider (LEP), the Super Proton Synchroton (SPS), the 28 GeV Proton Synchrotron (PS), including the Antiproton Decelerator (AD) for slow antiprotons and the ISOLDE facility for short-lived ions. The three experiments now approved for installation at the Large Hadron Collider (LHC) and the R and D projects aimed at the development of new detector technologies and data acquisition systems for the LHC experiments are also listed. (orig./WL)

International Geneva comes to CERN

CERN Multimedia

Antonella Del Rosso

2015-01-01

To strengthen even more its links with the United Nations and the world of multilateral diplomacy, CERN is launching a new series of seminars aiming to introduce other international organisations to CERN’s internal audience. The Director-General of the United Nations Office at Geneva (UNOG) will lead the way with a seminar on 20 February. You are all invited to take part.   Although everybody knows where the Palais des Nations is, not everybody has visited it and even fewer people know about the complex mechanisms that make the UN work. On 20 February, Mr Michael Møller, Acting Director-General of UNOG, will discuss the topics that the international organisation par excellence deals with every day, its relationship with the headquarters in New York and the challenges that lie ahead, as well as the cooperation between UNOG and CERN. Since 2010, CERN has considerably strengthened its relationships with the other international organisations in Geneva and beyond. Cooperation Ag...

3rd August 2010 - CEO Siemens Healthcare Sector, Chief Technology Officer, Head of Corporate Technology, Member of Siemens AG Managing Board, Germany, H. Requardt, signing the guest book with CERN Director-General R. Heuer

CERN Multimedia

Maximilien Brice

2010-01-01

CERN-HI-1008148 11: H. von Dewitz in the ATLAS Visitor centre with Collaboration member M. Hauschild (left) and Former IT Department Head W. von Rüden (right) CERN-HI-1008148 18 : Head of Innovation and Systems Projects, Siemens Healthcare Sector O. Heid (left) in the ATLAS Visitor centre with Collaboration member M. Hauschild. CERN-HI-1008148: in the ATLAS visitor centre, from left to right: Former IT Department Head W. von Rüden; ATLAS Collaboration P. Mättig; CEO Siemens Healthcare Sector, Chief Technology Officer, Head of Corporate Technology, Member of Siemens AG Managing Board, Germany, H. Requardt; Head of Innovation and Systems Projects, Siemens Healthcare Sector O. Heid; H. von Dewitz; ATLAS Collaboration member M. Hauschild.

Golden Jubilee photos: CERN gets a second Laboratory

CERN Multimedia

2004-01-01

CERN's first large accelerator, the Proton Synchrotron (PS), had hardly come into operation at the beginning of the 1960s, when physicists started to dream of a machine ten times more powerful, operating at 300 Gigaelectronvolts. The construction of such an accelerator required a new laboratory to be built and several European sites were candidates. John Adams, the project leader, suggested using the PS as an injector for the new machine, to achieve the higher energy level at a lower cost. The new Laboratory was therefore to be built on a site adjacent to CERN. The project was approved in 1971, but the CERN Convention, which only provided for a single laboratory, had to be amended. An agreement was signed with France on 16 June 1972 (see photograph), establishing a new site at Prévessin, in the Pays de Gex. The two laboratories, which each had their own administrative structures and Directors-General, were merged in 1976.

CERN Technical Training 2005: "Introduction to ANSYS"

CERN Multimedia

Davide Vitè

2005-01-01

Course Session (28.6 - 1.7.2005) The following course session is scheduled in the framework of the CERN Technical Training Programme 2005, and in collaboration with CAD-FEM AG (CH): Introduction to ANSYS (course in English): 28.6 - 1.7.2005 (4 days, 6 places available, estimated cost: approx. 1'200.- CHF per person). The price quoted above may vary, depending on the number of confirmed participants. If you are interested in attending the above course session, please discuss with your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at http://www.cern.ch/TechnicalTraining/ under "Places Available", with the detailed course programmes. Due to the short notice, please send at the same time an e-mail to Technical.Training@cern.ch, announcing your registration. The complete training offer of ANSYS courses at CERN can be found at the same website, in the Mechanical Design curriculum, Finite Element Methods section. Organiser: Davide Vit&egr...

Status of the RHIC and BNL/CERN heavy ion programs

International Nuclear Information System (INIS)

Ozaki, S.

1993-01-01

With the gold beam operation at the Brookhaven AGS started in 1992, and with the lead beam operation at the CERN SPS planned for 1994--1995, investigation of high nucleon density states through high energy heavy ion collisions is becoming a reality. In addition, the Relativistic Heavy Ion Collider (RHIC) at BNL, which is dedicated to the study of ultra-high energy heavy ion collisions, is under construction with a target completion date in 1997. There also is a plan to run the proposed CERN LHC for a few months a year for the heavy ion program. These colliders should provide opportunities to extend our knowledge of nuclear matter to the extraordinary states of extreme high temperature and high density, thus opening the way to the creation and study of quark-gluon plasma. The lattice gauge calculation based on the theory of strong interactions (QCD) predicts that, at such states, quarks and gluons are deconfined from individual nucleons and form a hot plasma. In this paper, the status of heavy ion stationary target programs at the BNL AGS and the CERN SPS, the progress of RHIC construction, and heavy ion research potential at LHC will be presented. The status of the CERN LHC will be covered elsewhere in these Proceedings

Experiments at CERN in 1988

International Nuclear Information System (INIS)

1988-11-01

This book is a compilation of the current experimental programme at CERN. The experiments listed are being performed at one of the following machines: The Super Proton Synchrotron (SPS), the Proton Synchrotron (PS) and the Synchro Cyclotron (SC). The four experiments planned for the Large Electron Positron machine (LEP) are also listed. The schematic layouts of beams and experimental areas at the different machines appear at the beginning of the report. The experiments are briefly described and a schematic layout of each apparatus is included together with lists of participants and institutions. The status of the experiments (preparation/data-taking/completed) corresponds to the situation at the end of 1988. The 'completed' status means that data-taking is finished, not necessarily the analysis of the results; this status is kept for two years and then the experiment is removed from the catalogue. A complete list of all the experiments published in these books since 1974 is given at the end. (orig./HSI)

50 Years of synchrotrons Adams' Memorial lecture

CERN Document Server

Lawson, J D; CERN. Geneva

1996-01-01

Fifty years ago Frank Goward of the Atomic Energy Research Establishment Group at Malvern converted a small American betatron to make the worldÕs first synchrotron. At the same time Marcus Oliphant was planning to build at Birmingham a large proton machine with a ring magnet and variable magnetic field. Ideas for this had come to him during night-shifts tending the electromagnetic separators at Oak Ridge during the war. Some seven years later, in 1953, a group gathered together in Geneva to build the PS. A major contributor to the design work which had made this possible was John Adams. An account of some of the achievements in these eventful years will be presented. CERN has built nine synchrotrons/colliders and two temporary test rings. Eight machines are still running. The review will start with the PS, the first proton synchrotron based on the alternating gradient principle invented in 1952 at BNL. The design work of the PS team, under the enlightened leadership of J.B. Adams, and the construction of the...

History of CERN. V. 2

International Nuclear Information System (INIS)

Hermann, A.; Krige, J.; Mersits, U.; Pestre, D.; Weiss, L.

1990-01-01

This volume of the History of CERN starts at 8 October 1954, when the Council of the new organization met for the first time, and takes the history through the mid-1960's. when it was decided to equip the laboratory with a second generation of accelerators and a new Director-General was nominated. It covers the building and the running of the laboratory during these dozen years, it studies the construction and exploitation of the 600 MeV Synchro-cyclotron and the 28 GeV Proton Synchrotron, it considers the setting up of the material and organizational infrastructure which made this possible, and it covers the reigns of four Director-Generals, Felix Bloch, Cornelis Bakker, John Adams and Victor Weisskopf. Part I describes the various aspects which together constitute the history of CERN and aims to offer a synchronic panorama year by year account of CERN's main activities. Part II deals primarily with technological achievements and scientific results and it includes the most technical chapters in the volume. Part III defines how the CERN 'system' functioned, how this science-based organization worked, how it chose, planned and concretely realized its experimental programme on the shop-floor and how it identified the equipment it would need in the long term and organized its relations with the outside world, notably the political world. The concluding Part IV brings out the specificity of CERN, to identify the ways in which it differed from other big science laboratories in the 1950's and 1960's, and to try to understand where its uniqueness and originality lay. (author). refs.; figs.; tabs

CERN Technical Training 2006: ANSYS Course Sessions (August-September 2006)

CERN Multimedia

2006-01-01

The following ANSYS course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2006, and in collaboration with CAD-FEM AG (CH): ANSYS Design Modeler (course in French): 29-30.8.2006 (2 days) ANSYS Workbench (course in French): 12-15.9.2006 (4 days, only 2 places available) If you are interested in attending any of the above course sessions, please discuss with your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at under "Upcoming course sessions", with the detailed course programmes. The complete training offer of ANSYS courses at CERN can be found at the same website, under the Mechanical Design curriculum. CERN Technical Training courses are open only to the members of CERN personnel (staff members and fellows; associates, students, users, project associates; apprentices: employees of CERN contractors, with some restrictions). In particular, quoted prices and programmes refer specifically to the CERN ...

Managing the Real-time Behaviour of a Particle Beam Factory The CERN Proton Synchrotron Complex and its Timing System Principles

CERN Document Server

Bau, J C; Lewis, J; Philippe, J

1998-01-01

In the CERN 26 Gev Proton Synchrotron (PS) accelerator network, super-cycles are defined as sequences of different kinds of beams produced repetitively [Fig.1]. Each of these beams is characterised by attributes such as particle type, beam energy, its route through the accelerator network, and the final end user. The super-cycle is programmed by means of an editor through which the operational requirements of the physics programme can be described. Each beam in the normal sequence may later be replaced by a set of spare beams automatically depending on software and hardware interlocks and requests presented to the Master Timing Generator (MTG [Glos. 1]). The MTG calculates at run time how each beam is to be manufactured, and sends a telegram [Glos. 3] message to each accelerator, just before each cycle, describing what it should be doing now and during the next cycle. These messages, together with key machine timing events and clocks are encoded onto a timing distribution drop net where they are distributed a...

Allocution prononcée par M. François de Rose, Président du Conseil de l'organisation européenne pour la recherche nucléaire à l'occasion de l'inauguration du synchrotron à protons du CERN le 5 février 1960

CERN Multimedia

CERN Press Office. Geneva

1960-01-01

Allocution prononcée par M. François de Rose, Président du Conseil de l'organisation européenne pour la recherche nucléaire à l'occasion de l'inauguration du synchrotron à protons du CERN le 5 février 1960

Threedimensional system of coordinates used at CERN

International Nuclear Information System (INIS)

Gervaise, J.; Mayoud, M.; Menant, E.

1976-01-01

This report is a complete account of the transformations and corrections necessary for geodetic quantities, whether directly measured or derived, before they can be entered into calculations involving the basic reference system used at CERN. A special type of projection (orthographic projection) has been developed, with the aim that it be the best possible for the geodetic system employed for the Super Proton Synchrotron (SPS) whilst retaining the basic possibilities provided for the Proton Synchrotron (PS) and the Intersecting Storage Rings (ISR). The coordinate system in which the geometry of particle beams is defined is necessarily Cartesian. This feature, although mathematically simple, has a number of consequences for the treatment of measurements which are physically connected with the shape of the Earth. Details of the orthographic projection, the planimetry, and the altimetry are given. (Author) [fr

People and things. CERN Courier, Jun 1995, v. 35(4)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1995-06-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: Einstein lived here by Abraham Pais: Einstein enthusiasts will be pleased with Abraham Pais' new book 'Einstein lived here', advertised as a companion volume to Pais' classic Einstein biography 'Subtle is the Lord'. (Some of the material also appears in 'Subtle'.) As such the new volume is packed with anecdotes, quotes and other details to delight Einstein admirers and entertain the scientifically literate, but falls short of being a biography. Especially interesting is the background to his Nobel Prize, awarded for his explanation of the photoelectric effect and not for his monumental work on relativity, and the account of his first marriage, to Mileva Marie.; Giorgio Brianti retires: After a 40-year career spanning the whole of CERN's history, Giorgio Brianti retired from the Laboratory at the end of April. As well as having overseen many major projects, Brianti's dedicated work for CERN's next major machine, the LHC, scheduled to become operational in 2004, means his contributions will continue to be evident. Joining the infant Laboratory in 1954, Brianti was initially involved in industrial liaison, a theme to which he subsequently returned. After work on the magnets and then controls and instrumentation for the new PS proton synchrotron, he moved on to operations. In 1964 he became leader of Synchro-Cyclotron (SC) Division, at a time when the SC, CERN's first machine, was being substantially upgraded and its role extended for the ISOLDE on-line isotope separator. In 1967 he took charge of the team building the Booster, a new synchrotron to inject beams into the PS. As well as fulfilling its immediate objective of improving PS performance, the innovative design of the Booster and its astonishing adaptability are still paying dividends. Built to operate at 800 MeV, it has shown its

John Adams Lecture | Lucio Rossi (CERN) | 3 December

CERN Multimedia

2012-01-01

The Role of Superconducting Magnets for High Energy Physics, by Dr. Lucio Rossi, CERN Monday 3 December, 2012 at 2:30 p.m. Council Chamber, CERN Abstract: Superconducting Magnets have played a crucial role for the particle physics energy frontier. From Tevatron to the LHC, passing through HERA and RHIC, they have defined the last 30 years of hadron colliders. The talk will review the successful projects and mention the reasons and learning from the ill-fated projects, Isabelle and SSC. Technology spin-offs will be discussed, together with the development of the next generation magnets, the high-field ones, aimed at passing the 10 Tesla frontier in collider quality magnets, and the fast-cycled ones, aimed at enabling field ramp rates of 1 to 4 Tesla per second in synchrotron-quality magnets.

CERN: LEP delivers; Looking deeper at spin; Handling low energy antiprotons

Energy Technology Data Exchange (ETDEWEB)

Anon.

1990-03-15

One year ago, with the world catalogue of Z particles - the electrically neutral carrier of the weak nuclear force - containing a few hundred examples, it sounded extravagant when proponents of CERN's new LEP electron-positron collider promised a hundred thousand Zs by Christmas 1989. The first round of experiments in the North Area of CERN's SPS proton synchrotron included a considerable investment in studies using high energy muon beams. This paid off with important contribuions to physics, particularly in the measurement of the quark/gluon content (structure functions) of nucleons. ; The LEAR low energy antiproton ring at CERN takes its antimatter beams down to very low kinetic energies - less than 10 MeV - for a unique range of physics studies. However even these modest energies are too high for a series of experiments aiming to explore the effects of gravity on antimatter.

Studies of Lear antiproton deceleration: radiofrequency quadripole or synchrotron

International Nuclear Information System (INIS)

Iazzourene, F.

1987-06-01

The aim of this work is to study a radiofrequency quadrupole (RFQ) and a synchrotron as decelerating systems for antiprotons extracted from the Low Energy Antiproton Ring (LEAR) at CERN. Antiprotons at energies lower than those available from LEAR are need by some experiments, eg. the measurement of the mass difference between protons and antiprotons with 10 -9 accuracy, using a Smith and Princeton spectrometer, and the measurement of gravitation on the antiprotons, using a trap. Depending on the LEAR performances, one can conclude that the RFQ is suitable for the experiment on the gravitation, and the synchrotron, owing to its electron cooling system, is a better solution for the experiment on the mass difference measurement, because of the very small acceptance of the spectrometer [fr

People and things. CERN Courier, April 1980, v. 20(2)

International Nuclear Information System (INIS)

Anon.

1980-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: On 22 May Brookhaven National Laboratory will celebrate the twentieth year of operation of the Alternating Gradient Synchrotron; Japanese scientists are becoming involved in extensive collaborations at US high energy physics Laboratories (Argonne, Berkeley, Brookhaven, Fermi lab and Stanford)

Development of 18 K helium refrigeration system for CERN

CERN Document Server

CERN. Geneva

2004-01-01

The Conseil Europeen pour Ia Recherche Nucleaire (CERN) placed an order for a 1.8 K helium refrigeration system with IHI for the Large Hadron Collider project in 1999. IHI formed a consortium with Linde Kryotechnik AG (Switzerland), which has long experience with helium refrigeration systems. IHI designed and manufactured cold compressors based on leading technologies and expertise for turbo machinery. The cold compressor has the highest efficiency in the world. This paper describes the 1.8 K helium refrigeration system and performance test results at CERN. (5 refs).

Electron cloud in the CERN accelerators (PS, SPS, LHC)

International Nuclear Information System (INIS)

Iadarola, G; Rumolo, G

2013-01-01

Several indicators have pointed to the presence of an Electron Cloud (EC) in some of the CERN accelerators, when operating with closely spaced bunched beams. In particular, spurious signals on the pick ups used for beam detection, pressure rise and beam instabilities were observed at the Proton Synchrotron (PS) during the last stage of preparation of the beams for the Large Hadron Collider (LHC), as well as at the Super Proton Synchrotron (SPS). Since the LHC has started operation in 2009, typical electron cloud phenomena have appeared also in this machine, when running with trains of closely packed bunches (i.e. with spacings below 150ns). Beside the above mentioned indicators, other typical signatures were seen in this machine (due to its operation mode and/or more refined detection possibilities), like heat load in the cold dipoles, bunch dependent emittance growth and degraded lifetime in store and bunch-by-bunch stable phase shift to compensate for the energy loss due to the electron cloud. An overview of the electron cloud status in the different CERN machines (PS, SPS, LHC) will be presented in this paper, with a special emphasis on the dangers for future operation with more intense beams and the necessary countermeasures to mitigate or suppress the effect. (author)

Proton synchrotron accelerator theory

International Nuclear Information System (INIS)

Wilson, E.J.N.

1977-01-01

This is the text of a series of lectures given as part of the CERN Academic Training Programme and primarily intended for young engineers and technicians in preparation for the running-in of the 400 GeV Super Proton Synchrotron (SPS). Following the definition of basic quantities, the problems of betatron motion and the effect of momentum spread and orbital errors on the transverse motion of the beam are reviewed. Consideration is then given to multipole fields, chromaticity and non-linear resonances. After dealing with basic relations governing longitudinal beam dynamics, the space-charge, resistive-wall and other collective effects are treated, with reference to precautions in the SPS to prevent their occurrence. (Auth.)

Experiments at CERN in 1985

International Nuclear Information System (INIS)

1985-11-01

This book is a compilation of the current experimental program at CERN. The experiments listed are being performed at one of the following machines: the Super Proton Synchrotron (SPS), the Proton Synchrotron (PS) and the Synchro-Cyclotron (SC). The four experiments to be done by means of the Large Electron Positron machine (LEP) are also listed. The schematic layouts of beams and experiments at the various machines are given in the beginning of the report. The experiment goals and methods are briefly described and a schematic layout of the apparatus is included. Lists of participants and their institutions are also given. The status of the experiments (preparation, data-taking, completed) corresponds to the situation as of 1st November, 1985. ''Completed'' means only that data-taking is finished, not necessarily the analysis of the results; this status is kept for two years and then the experiment is removed from the catalogue. A complete list of all experiments published in this book since 1975 is given at the end of the catalogue. (orig./HSI)

Three-dimensional coordinate system used at CERN

International Nuclear Information System (INIS)

Gervaise, J.; Mayoud, M.; Menant, E.

1983-11-01

This report is a detailed account of the transformations and corrections that must be applied to any geodetic quantity - whether directly observed or derived - before it can be introduced into calculations relating to the reference system of coordinates used at CERN. In particular, a type of projection, called orthographic projection, has been developed to be as well adapted as possible to the geodetic network of the Subterranean Proton Synchrotron (SPS), while preserving the basic possibilities of the other installations - i.e., the Proton Synchrotron (PS) and the Intersecting Storage Rings (ISR). The system in which the particle beam geometry is defined is necessarily cartesian. This feature, though mathematically simple, nevertheless has numerous consequences for the treatment of measurements that are physically connected to the shape of the earth. The calculations of the orthographic projection, the planimetry and the altimetry are presented in detail. 12 figures

Characterization of isolated Ag cations in homoionic Ag-Y zeolites: A combined anomalous XRPD and EXAFS study

International Nuclear Information System (INIS)

Lamberti, C.; Prestipino, C.; Bordiga, S.; Fitch, A.N.; Marra, G.L.

2003-01-01

In this contribution we report a structural characterization of a homoionic Ag-Y zeolite (Si/Al=2.63) on both short (EXAFS) and long range (XRD) scales. Our study shows that the zeolite is a near-100% exchanged silver faujasite, showing almost isolated Ag + counterions (EXAFS estimates that clustered species represent less than 2% of the whole silver). Synchrotron radiation XRPD measurements (ESRF, BM16), performed at the Ag-K edge (λ=0.486103(2) A), just before (λ=0.486093(2) A) and far away (λ=0.491153(2) A), allowed us to locate the near totality of the expected Ag + counterions: 51.9(4) out of 52.9 per unit cell, located in five different sites. The output of the Rietveld refinement has been used successfully to simulate the Ag-K edge EXAFS spectra (ESRF, BM29)

CERN: LEP delivers; Looking deeper at spin; Handling low energy antiprotons

International Nuclear Information System (INIS)

Anon.

1990-01-01

One year ago, with the world catalogue of Z particles - the electrically neutral carrier of the weak nuclear force - containing a few hundred examples, it sounded extravagant when proponents of CERN's new LEP electron-positron collider promised a hundred thousand Zs by Christmas 1989. The first round of experiments in the North Area of CERN's SPS proton synchrotron included a considerable investment in studies using high energy muon beams. This paid off with important contribuions to physics, particularly in the measurement of the quark/gluon content (structure functions) of nucleons. ; The LEAR low energy antiproton ring at CERN takes its antimatter beams down to very low kinetic energies - less than 10 MeV - for a unique range of physics studies. However even these modest energies are too high for a series of experiments aiming to explore the effects of gravity on antimatter

People and things. CERN Courier, Jul-Aug 1984, v. 24(6)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1984-07-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. Valuable information on collective nuclear matter has come from another GSI / Berkeley team working at the Bevalac, this time using a streamer chamber to measure pion production in heavy ion collisions and infer the properties of the compressed nuclear matter formed in the 10{sup -23} seconds following the collisions. Judged by the bubbling enthusiasm of its 260 users, the LEAR Low Energy Antiproton Ring at CERN continues to be a great success. Electron beams have been taken to 800 MeV in the Aladdin storage ring at the Synchrotron Radiation Center, University of Wisconsin- Madison. The UA 1 'Monojets ' were first past the post in this year's traditional 3.9 km relay race round the CERN site.

People and things. CERN Courier, Jul-Aug 1984, v. 24(6)

International Nuclear Information System (INIS)

Anon.

1984-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. Valuable information on collective nuclear matter has come from another GSI / Berkeley team working at the Bevalac, this time using a streamer chamber to measure pion production in heavy ion collisions and infer the properties of the compressed nuclear matter formed in the 10 -23 seconds following the collisions. Judged by the bubbling enthusiasm of its 260 users, the LEAR Low Energy Antiproton Ring at CERN continues to be a great success. Electron beams have been taken to 800 MeV in the Aladdin storage ring at the Synchrotron Radiation Center, University of Wisconsin- Madison. The UA 1 'Monojets ' were first past the post in this year's traditional 3.9 km relay race round the CERN site

CERN Accelerator School: Intensity Limitations in Particle Beams | 2-11 November

CERN Multimedia

2015-01-01

Registration is now open for the CERN Accelerator School’s specialised course on Intensity Limitations in Particle Beams, to be held at CERN between 2 and 11 November 2015.   This course will mainly be of interest to staff in accelerator laboratories, university departments and companies manufacturing accelerator equipment. Many accelerators and storage rings, whether intended for particle physics experiments, synchrotron light sources or industrial applications, require beams of high brightness and the highest possible intensities. A good understanding of the possible limitations is required to achieve the desired performance. The programme for this course will cover the interaction of beams with their surroundings, with other beams and further collective effects. Lectures on the effects and possible mitigations will be complemented by tutorials. Further information can be found at: http://cas.web.cern.ch/cas/Intensity-Limitations-2015/IL-advert.html   http:/...

High pressure and high temperature EXAFS and diffraction study of AgI

International Nuclear Information System (INIS)

Yoshiasa, Akira; Arima, Hiroshi; Fukui, Hiroshi; Okube, Maki; Katayama, Yoshinori; Ohtaka, Osamu

2009-01-01

We have determined the precise P-T phase diagram of AgI by in-situ high-pressure high-temperature synchrotron experiments. X-ray diffraction and XAFS measurements were performed up to 6.0 GPa and 1100 K using a multi-anvil high-pressure device and synchrotron radiation from SPring-8. In the disordered rock-salt phase, Ag ions occupy both octahedral and tetrahedral sites and twenty percent of Ag ions occupy the tetrahedral site as a maximum value at 2 GPa. From the viewpoint of the local structure analyses, some sudden changes are recognized near broad phase transition point. Analysis of EXAFS Debye-Waller factor is useful because the force constant can be decided directly even at high pressure and high temperature. Pressure influences greatly the effective potential and anharmonicity decreases with increasing pressure. (author)

Nonlinear Resonance Benchmarking Experiment at the CERN Proton Synchrotron

CERN Document Server

Hofmann, I; Giovannozzi, Massimo; Martini, M; Métral, Elias

2003-01-01

As a first step of a space charge - nonlinear resonance benchmarking experiment over a large number of turns, beam loss and emittance evolution were measured over 1 s on a 1.4 GeV kinetic energy flat-bottom in the presence of a single octupole. By lowering the working point towards the resonance a gradual transition from a loss-free core emittance blow-up to a regime dominated by continuous loss was found. Our 3D simulations with analytical space charge show that trapping on the resonance due to synchrotron oscillation causes the observed core emittance growth as well as halo formation, where the latter is explained as the source of the observed loss.

Sesame Synchrotron Light for Experimental Sciences and Application in the Middle East

International Nuclear Information System (INIS)

El-Khalafawy, T.A.

2003-01-01

Anew international center for synchrotron radiation for research excellence for scientists from throughout the Middle East as well as other parts of the world could do for science what CERN has done for science in Europe. SESAME Project (Synchrotron Light for Experimental Sciences and Application in the Middle East ) under the umbrella for UNESCO establish the first major international research center as a cooperative venture by the scientists and governments of the Middle East, opened to all qualified scientists. It will be propeller for the regional economy while promoting the peaceful development of science and technology in the Middle East. SESAME will have as its centerpiece a synchrotron radiation based on a gift from Germany of the 0.8 GeV BESSYI storage ring and injector system which stopped operation at the end of November 1999

Preparation of a primary argon beam for the CERN fixed target physics.

Science.gov (United States)

Küchler, D; O'Neil, M; Scrivens, R; Thomae, R

2014-02-01

The fixed target experiment NA61 in the North Area of the Super Proton Synchrotron is studying phase transitions in strongly interacting matter. Up to now they used the primary beams available from the CERN accelerator complex (protons and lead ions) or fragmented beams created from the primary lead ion beam. To explore a wider range of energies and densities a request was made to provide primary argon and xenon beams. This paper describes the results of the setting up and 10 week test run of the Ar(11+) beam from the 14.5 GHz ECR ion source and the linear accelerator (Linac3) at CERN.

Preparation of a primary argon beam for the CERN fixed target physics

Energy Technology Data Exchange (ETDEWEB)

Küchler, D., E-mail: detlef.kuchler@cern.ch; O’Neil, M.; Scrivens, R. [CERN, BE Department, 1211 Geneva 23 (Switzerland); Thomae, R. [iThemba LABS, P.O. Box 722, Somerset West 7130 (South Africa)

2014-02-15

The fixed target experiment NA61 in the North Area of the Super Proton Synchrotron is studying phase transitions in strongly interacting matter. Up to now they used the primary beams available from the CERN accelerator complex (protons and lead ions) or fragmented beams created from the primary lead ion beam. To explore a wider range of energies and densities a request was made to provide primary argon and xenon beams. This paper describes the results of the setting up and 10 week test run of the Ar{sup 11+} beam from the 14.5 GHz ECR ion source and the linear accelerator (Linac3) at CERN.

Polarization preservation in the AGS

International Nuclear Information System (INIS)

Ratner, L.G.

1983-01-01

The successful operation of a high energy polarized beam at the Argonne Zero Gradient Synchrotron (ZGS) with the concommitant development of depolarizing resonance correction techniques has led to the present project of commissioning such a beam at the Brookhaven Alternating Gradient Synchrotron (AGS). A description of the project was presented at the 1981 National Accelerator Conference. I would like to now present a more detailed description of how we plan to preserve the polarization during acceleration, and to present our game plan for tuning through some 50 resonances and reaching our goal of a 26 GeV polarized proton beam with greater than 60% polarization

News from the Library: About a dozen prestigious CERN physicists contribute to a special issue of EPJ H

CERN Multimedia

CERN Library

2012-01-01

European Physical Journal H is a journal published by Springer that focuses on the historical development of ideas in contemporary physics. Since 2009 it has partially replaced the journal "Annales de Physique" published by EDP sciences.   The journal recently published a special issue about CERN accelerators entitled "CERN's accelerators, experiments and international integration 1959-2009", with the former CERN Director-General, Herwig Schopper, as guest editor. The origin of this issue is a symposium that took place at CERN on 3-4 December 2009: "50 years of Nobel Memories in High-Energy Physics", for the 50th anniversary of the CERN Proton Synchrotron. Some of the contributions to this symposium became articles that are a real treasure for physicists and historians. Many of these are actually personal recollections from the main actors of the CERN accelerators. In addition, regular papers have been invited to make this ...

The synchrotron option for a multi-megawatt proton driver

CERN Document Server

Prior, C R

2006-01-01

Of the three main options for a proton driver for a neutrino facility, synchrotron-based designs feature in proposals from J-PARC, Brookhaven and the Rutherford Appleton Laboratory. There are also synchrotron and linac options being considered in parallel at Fermilab. The Japanese machine has been developed from initial plans for a 3 GeV neutron source into a multi-purpose facility, with the addition of a 50 GeV proton synchrotron in a phased programme of construction. Brookhaven's ideas are based on upgrading the AGS, first to 1 MW and then to 4 MW. Fermilab is looking for a design to bypass the bottleneck that is the existing booster. At RAL, several designs have emerged, including one specifically based on upgrading the ISIS spallation neutron source into a possible dual neutron- neutrino facility.

CAS CERN Accelerator School: Fourth general accelerator physics course

International Nuclear Information System (INIS)

Turner, S.

1991-01-01

The fourth CERN Accelerator School (CAS) basic course on General Accelerator Physics was given at KFA, Juelich, from 17 to 28 September 1990. Its syllabus was based on the previous similar courses held at Gif-sur-Yvette in 1984, Aarhus 1986, and Salamanca 1988, and whose proceedings were published as CERN Reports 85-19, 87-10, and 89-05, respectively. However, certain topics were treated in a different way, improved or extended, while new subjects were introduced. All of these appear in the present proceedings, which include lectures or seminars on the history and applications of accelerators, phase space and emittance, chromaticity, beam-beam effects, synchrotron radiation, radiation damping, tune measurement, transition, electron cooling, the designs of superconducting magnets, ring lattices, conventional RF cavities and ring RF systems, and an introduction to cyclotrons. (orig.)

People and thing. CERN Courier, Nov 1986, v. 26(9)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1986-11-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The design current of 1 ampere was achieved this summer at the 750 MeV vacuum ultra-violet storage ring of the US National Synchrotron Light Source at Brookhaven. The next International Symposium on Lepton and Photon Interactions at High Energies will be held in Hamburg, West Germany, from 27-31 July 1987. The second Lake Louise Winter Institute will be held from 16-22 February at Chateau Lake Louise, Canada.; The 32nd Scottish Universities' Summer School in Physics will be held from 9-29 August 1987 at the University of St. Andrews. Earlier this year an exhibition of photographs of great beauty was presented at CERN on the invitation of the Staff Association. Following the success of the Symposium on Cosmology, Astronomy and Particle Physics organized jointly by CERN and the European Southern Observatory (ESO), now a regular feature of the physics international physics calendar, ESO and CERN are organizing an International School on Astro-Particle Physics at the Ettore Majorana Centre for Scientific Culture, Erice, Sicily, from 5-25 January.

History, developments and recent performance of the CERN linac 1

International Nuclear Information System (INIS)

Haseroth, H.; Hill, C.E.; Langbein, K.; Tanke, E.; Tylor, C.; Tetu, P.; Warner, D.; Weiss, M.

1992-01-01

In early June 1992 the original CERN 50 MeV proton Linac accelerated its last beam after nearly 33 years of loyal service. Although conceived as a proton machine and commissioned in 1959 as an injector for the 26 GeV Proton Synchrotron, it finished its life as a light-ion source for the Super Proton Synchrotron (SPS) and as a cheap source of particles for tests in the Low Energy Anti-Proton Ring (LEAR). Highlights in its recent history were the installation of RFQs and the upgrading with an ECR source for O 6+ and S 12+ ions. The early parameters and the subsequent modifications as well as the performance are reviewed in this paper. (Author) 8 refs., 3 figs., tab

People and things. CERN Courier, May 1987, v. 27(4)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1987-05-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The XIX General Assembly of the International Union of Pure and Applied Physics (IUPAP) is to be held at the US National Academy of Sciences, Washington DC, from 29 September - 3 October. The theme of the scientific programme will be 'Physics in a Technological World', reflecting the IUPAP General Council's aim of emphasizing the role of industrial physics and improving relations between industrial and academic physics. The CERN Accelerator School is organizing in collaboration with BESSY (the Berlin electron synchrotron radiation centre) the second of its biennial two-week courses on advanced accelerator physics.

People and things. CERN Courier, May 1987, v. 27(4)

International Nuclear Information System (INIS)

Anon.

1987-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The XIX General Assembly of the International Union of Pure and Applied Physics (IUPAP) is to be held at the US National Academy of Sciences, Washington DC, from 29 September - 3 October. The theme of the scientific programme will be 'Physics in a Technological World', reflecting the IUPAP General Council's aim of emphasizing the role of industrial physics and improving relations between industrial and academic physics. The CERN Accelerator School is organizing in collaboration with BESSY (the Berlin electron synchrotron radiation centre) the second of its biennial two-week courses on advanced accelerator physics

Beam Dynamics Studies for High-Intensity Beams in the CERN Proton Synchrotron

CERN Document Server

AUTHOR|(CDS)2082016; Benedikt, Michael

With the discovery of the Higgs boson, the existence of the last missing piece of the Standard Model of particle physics (SM) was confirmed. However, even though very elegant, this theory is unable to explain, for example, the generation of neutrino masses, nor does it account for dark energy or dark matter. To shed light on some of these open questions, research in fundamental particle physics pursues two complimentary approaches. On the one hand, particle colliders working at the high-energy frontier, such as the Large Hadron Collider (LHC) at the European Organization for Nuclear Research (CERN), located in Geneva, Switzerland, are utilized to investigate the fundamental laws of nature. Alternatively, fixed target facilities require high-intensity beams to create a large flux of secondary particles to investigate, for example, rare particle decay processes, or to create neutrino beams. This thesis investigates limitations arising during the acceleration of high-intensity beams at the CERN Proton Synchrotro...

Generation of warm dense matter and strongly coupled plasmas using the High Radiation on Materials facility at the CERN Super Proton Synchrotron

CERN Document Server

Tahir, N A; Brugger, M; Assmann, R; Shutov, A; Lomonosov, I V; Gryaznov, V; Piriz, A R; Udrea, S; Hoffmann, D H H; Fortov, V E; Deutsch, C

2009-01-01

A dedicated facility named High Radiation on Materials (HiRadMat) is being constructed at CERN to study the interaction of the 450 GeV protons generated by the Super Proton Synchrotron (SPS) with fixed solid targets of different materials. The main purpose of these future experiments is to study the generation and propagation of thermal shock waves in the target in order to assess the damage caused to the equipment, including collimators and absorbers, in case of an accident involving an uncontrolled release of the entire beam at a given point. Detailed numerical simulations of the beam-target interaction of several cases of interest have been carried out. In this paper we present simulations of the thermodynamic and the hydrodynamic response of a solid tungsten cylindrical target that is facially irradiated with the SPS beam with nominal parameters. These calculations have been carried out in two steps. First, the energy loss of the protons is calculated in the solid target using the FLUKA code (Fasso et al....

People and things. CERN Courier, Jun 1995, v. 35(4)

International Nuclear Information System (INIS)

Anon.

1995-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: Einstein lived here by Abraham Pais: Einstein enthusiasts will be pleased with Abraham Pais' new book 'Einstein lived here', advertised as a companion volume to Pais' classic Einstein biography 'Subtle is the Lord'. (Some of the material also appears in 'Subtle'.) As such the new volume is packed with anecdotes, quotes and other details to delight Einstein admirers and entertain the scientifically literate, but falls short of being a biography. Especially interesting is the background to his Nobel Prize, awarded for his explanation of the photoelectric effect and not for his monumental work on relativity, and the account of his first marriage, to Mileva Marie.; Giorgio Brianti retires: After a 40-year career spanning the whole of CERN's history, Giorgio Brianti retired from the Laboratory at the end of April. As well as having overseen many major projects, Brianti's dedicated work for CERN's next major machine, the LHC, scheduled to become operational in 2004, means his contributions will continue to be evident. Joining the infant Laboratory in 1954, Brianti was initially involved in industrial liaison, a theme to which he subsequently returned. After work on the magnets and then controls and instrumentation for the new PS proton synchrotron, he moved on to operations. In 1964 he became leader of Synchro-Cyclotron (SC) Division, at a time when the SC, CERN's first machine, was being substantially upgraded and its role extended for the ISOLDE on-line isotope separator. In 1967 he took charge of the team building the Booster, a new synchrotron to inject beams into the PS. As well as fulfilling its immediate objective of improving PS performance, the innovative design of the Booster and its astonishing adaptability are still paying

The AGS γt-jump system

International Nuclear Information System (INIS)

Syphers, M.J.; Ahrens, L.; van Asselt, W.; Brennan, J.M.

1994-01-01

In an attempt to generate a lossless crossing of an accelerator's transition energy, one procedure is to alter the transition energy of the accelerator quickly as the beam passes through this energy region by changing the optics of the lattice -- a so-called ''transition jump,'' or '' γt -jump'' scheme. Such a system was first implemented at CERN and later adopted at other accelerator laboratories. A scheme for the AGS was developed in 1986. A description of the AGS γt -jump system, and recent results from its commissioning are presented in this report

NA61/SHINE facility at the CERN SPS: beams and detector system

CERN Document Server

Abgrall, N.; Aduszkiewicz, A.; Ali, Y.; Anticic, T.; Antoniou, N.; Baatar, B.; Bay, F.; Blondel, A.; Blumer, J.; Bogomilov, M.; Bogusz, M.; Bravar, A.; Brzychczyk, J.; Bunyatov, S.A.; Christakoglou, P.; Czopowicz, T.; Davis, N.; Debieux, S.; Dembinski, H.; Diakonos, F.; Di Luise, S.; Dominik, W.; Drozhzhova, T.; Dumarchez, J.; Dynowski, K.; Engel, R.; Efthymiopoulos, I.; Ereditato, A.; Fabich, A.; Feofilov, G.A.; Fodor, Z.; Fulop, A.; Gazdzicki, M.; Golubeva, M.; Grebieszkow, K.; Grzeszczuk, A.; Guber, F.; Haesler, A.; Hasegawa, T.; Hierholzer, M.; Idczak, R.; Igolkin, S.; Ivashkin, A.; Jokovic, D.; Kadija, K.; Kapoyannis, A.; Kaptur, E.; Kielczewska, D.; Kirejczyk, M.; Kisiel, J.; Kiss, T.; Kleinfelder, S.; Kobayashi, T.; Kolesnikov, V.I.; Kolev, D.; Kondratiev, V.P.; Korzenev, A.; Koversarski, P.; Kowalski, S.; Krasnoperov, A.; Kurepin, A.; Larsen, D.; Laszlo, A.; Lyubushkin, V.V.; Maćkowiak-Pawlowska, M.; Majka, Z.; Maksiak, B.; Malakhov, A.I.; Maletic, D.; Manglunki, D.; Manic, D.; Marchionni, A.; Marcinek, A.; Marin, V.; Marton, K.; Mathes, H.J; Matulewicz, T.; Matveev, V.; Melkumov, G.L.; Messina, M.; Mrówczyński, St.; Murphy, S.; Nakadaira, T.; Nirkko, M.; Nishikawa, K.; Palczewski, T.; Palla, G.; Panagiotou, A.D.; Paul, T.; Peryt, W.; Petukhov, O.; Pistillo, C.; Planeta, R.; Pluta, J.; Popov, B.A.; Posiadala, M.; Puławski, S.; Puzovic, J.; Rauch, W.; Ravonel, M.; Redij, A.; Renfordt, R.; Richter-Was, E.; Robert, A.; Röhrich, D.; Rondio, E.; Rossi, B.; Roth, M.; Rubbia, A.; Rustamov, A.; Rybczyński, M.; Sadovsky, A.; Sakashita, K.; Savic, M.; Schmidt, K.; Sekiguchi, T.; Seyboth, P.; Sgalaberna, D.; Shibata, M.; Sipos, R.; Skrzypczak, E.; Słodkowski, M.; Sosin, Z.; Staszel, P.; Stefanek, G.; Stepaniak, J.; Stroebele, H.; Susa, T.; Szuba, M.; Tada, M.; Tereshchenko, V.; Tolyhi, T.; Tsenov, R.; Turko, L.; Ulrich, R.; Unger, M.; Vassiliou, M.; Veberic, D.; Vechernin, V.V.; Vesztergombi, G.; Vinogradov, L.; Wilczek, A.; Włodarczyk, Z.; Wojtaszek-Szwarz, A.; Wyszyński, O.; Zambelli, L.; Zipper, W.

2014-01-01

NA61/SHINE (SPS Heavy Ion and Neutrino Experiment) is a multi-purpose experimental facility to study hadron production in hadron-proton, hadron-nucleus and nucleus-nucleus collisions at the CERN Super Proton Synchrotron. It recorded the first physics data with hadron beams in 2009 and with ion beams (secondary 7Be beams) in 2011. NA61/SHINE has greatly profited from the long development of the CERN proton and ion sources and the accelerator chain as well as the H2 beamline of the CERN North Area. The latter has recently been modified to also serve as a fragment separator as needed to produce the Be beams for NA61/SHINE. Numerous components of the NA61/SHINE set-up were inherited from its predecessors, in particular, the last one, the NA49 experiment. Important new detectors and upgrades of the legacy equipment were introduced by the NA61/SHINE Collaboration. This paper describes the state of the NA61/SHINE facility - the beams and the detector system - before the CERN Long Shutdown I, which started in March ...

CERN moves to http://home.cern

CERN Multimedia

2015-01-01

A new top-level domain for CERN will be inaugurated next week, with the migration of the core website to http://home.cern.   The new home.cern webpage. The .cern top-level domain is intended for the exclusive use of CERN and its affiliates, and will soon be open for applications from within the community. Clear governance mechanisms for registration and management of .cern domains have been put in place. Applications for domains may be submitted by current members of the CERN personnel, and must be sponsored by a CERN entity such as a department, experiment, project or CERN-recognised experiment. For more information please refer to the registration policy. The acquisition of the .cern top-level domain was negotiated via ICANN’s new gTLD programme by a board comprising members of the CERN Legal Service, Communications group and IT department. .cern is one of over 1,300 new top-level domains that will launch over the coming months and years. The .cern domain nam...

Design of a high-precision fast wire scanner for the SPS at CERN

CERN Document Server

Veness, R; Dehning, B; Emery, J; Herranz Alvarez, J; Koujili, M; Samuelsson, S; Sirvent, J-L

2012-01-01

Studies are going on of a new wire scanner concept. All moving parts are inside the beam vacuum and it is specified for use in all the machines across the CERN accelerator complex. Key components have been developed and tested. Work is now focussing on the installation of a prototype for test in the Super Proton Synchrotron (SPS) accelerator. This article presents the specification of the device and constraints on the design for integration in the different accelerators at CERN. The design issues of the mechanical components are discussed and optimisation work shown. Finally, the prototype design, integrating the several components into the vacuum tank is presented.

Golden Jubilee photos: The Proton Synchrotron

CERN Multimedia

2004-01-01

Energy record Standing before the CERN personnel in the Main Auditorium on 25 November 1959, John Adams held not a bottle of champagne but a bottle of vodka. It had been presented to him a few months earlier during a visit to Dubna in the Soviet Union, where the world's most powerful accelerator had just been commissioned. He had been given strict instructions not to open the bottle until Dubna's energy record of 10 GeV had been broken. On 24 November, the record was smashed by CERN's brand new machine, the Proton Synchrotron, which accelerated protons at 24 GeV, over twice the energy of the Dubna machine. Before sending the empty bottle back to the Soviet Union, John Adams, who had headed the accelerator's construction, placed the recording of the signal in it as proof of the record. More than 40 years later, the PS is still going strong, delivering beams with particle densities a thousand times greater than when it first started operation. Over the years, other accelerators have grown up around it and the...

Model based controls and the AGS booster controls system architecture

International Nuclear Information System (INIS)

Casella, R.A.

1987-01-01

The Heavy Ion Transfer Line used to inject heavy ions created at the Tandem Van de Graaff into the Alternating Gradient Synchrotron (AGS) is briefly discussed, particularly as regards its control system

Equipment for measuring pulsed supply of the 400 GeV CERN accelerator

CERN Document Server

Aubry, G; De Vries, J

1977-01-01

Describes the energy measuring equipment for metering the pulsed supply to the CERN proton synchrotron which is under design and development by Landis and Gyr in association with Electricity' de France. The design will take into account the shape of the load curve and the tariff structure of the supply company. It will include solid state metering, a mini-computer and telemetering equipment. (2 refs).

Pramana – Journal of Physics | Indian Academy of Sciences

Indian Academy of Sciences (India)

Abstract. The field of relativistic heavy-ion physics is reviewed with emphasis on new results and highlights from the first run of the relativistic heavy-ion collider at BNL and the 15 year research programme at the super proton synchrotron (SPS) at CERN and the AGS at BNL.

Upgrading the AGS polarized beam facility

International Nuclear Information System (INIS)

Ratner, L.G.

1991-01-01

Although present techniques for crossing depolarizing resonances in circular accelerators work, they are very time-consuming to implement and were only able to provide about a 40% polarized beam at 22 GeV in the Alternating Gradient Synchrotron (AGS). We propose to install a partial ''Siberian Snake'' solenoid in the AGS to eliminate the need to correct imperfection resonances and to make other modifications in our intrinsic resonance correctors. This will allow us to reach an energy of 25 GeV with 70% polarization and will enable the AGS to be an efficient injector of polarized protons into the Relativistic Heavy Ion Collider (RHIC), as well as being able to carry on a fixed-target program with minimum set-up time. 3 refs., 5 figs., 1 tab

People and thing. CERN Courier, Nov 1986, v. 26(9)

International Nuclear Information System (INIS)

Anon.

1986-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The design current of 1 ampere was achieved this summer at the 750 MeV vacuum ultra-violet storage ring of the US National Synchrotron Light Source at Brookhaven. The next International Symposium on Lepton and Photon Interactions at High Energies will be held in Hamburg, West Germany, from 27-31 July 1987. The second Lake Louise Winter Institute will be held from 16-22 February at Chateau Lake Louise, Canada.; The 32nd Scottish Universities' Summer School in Physics will be held from 9-29 August 1987 at the University of St. Andrews. Earlier this year an exhibition of photographs of great beauty was presented at CERN on the invitation of the Staff Association. Following the success of the Symposium on Cosmology, Astronomy and Particle Physics organized jointly by CERN and the European Southern Observatory (ESO), now a regular feature of the physics international physics calendar, ESO and CERN are organizing an International School on Astro-Particle Physics at the Ettore Majorana Centre for Scientific Culture, Erice, Sicily, from 5-25 January

Microwave Schottky diagnostic systems for the Fermilab Tevatron, Recycler, and CERN Large Hadron Collider

Directory of Open Access Journals (Sweden)

Ralph J. Pasquinelli

2011-07-01

Full Text Available A means for noninvasive measurement of transverse and longitudinal characteristics of bunched beams in synchrotrons has been developed based on high sensitivity slotted waveguide pickups. The pickups allow for bandwidths exceeding hundreds of MHz while maintaining good beam sensitivity characteristics. Wide bandwidth is essential to allow bunch-by-bunch measurements by means of a fast gate. The Schottky detector system is installed and successfully commissioned in the Fermilab Tevatron, Recycler and CERN LHC synchrotrons. Measurement capabilities include tune, chromaticity, and momentum spread of single or multiple beam bunches in any combination. With appropriate calibrations, emittance can also be measured by integrating the area under the incoherent tune sidebands.

People and things. CERN Courier, Dec 1984, v. 24(10)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1984-12-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. With the primary goal of exploiting the new Tevatron facilities for physics, Fermilab Director Leon Lederman has announced a management reshuffle, effective from 1 October. The first 550 MeV proton bunches have been successfully extracted from the new Spallation Neutron Source at the Rutherford Appleton Laboratory, UK, at the first attempt.Lee Teng of Fermilab has been appointed Director of Taiwan's recently founded $30 million Synchrotron Radiation Research Centre, the island's first major large scale research project. A Protocol on cooperation between CERN and the Chinese Academy of Sciences was signed at CERN on 18 October by Zhao Guangzhao, a Vice-President of the Academy, and CERN Director General Herwig Schopper. The next Particle Accelerator Conference will be held in Vancouver, Canada, from 13-16 May 1985, organized by the TRIUMF Laboratory. Following the 1983 Santa Fe Conference, it will be the 11th in this biennial series devoted to all aspects of accelerator science, engineering and technology. From 3-14 September, the CERN Accelerator School organized (jointly with the Laboratoire de l'Accélérateur Linéaire, Orsay and the Laboratoire National Saturne, Saclay) a course on General Accelerator Physics at the Ecole Supérieure d'Electricité, Gif-sur-Yvette.

People and things. CERN Courier, Dec 1984, v. 24(10)

International Nuclear Information System (INIS)

Anon.

1984-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. With the primary goal of exploiting the new Tevatron facilities for physics, Fermilab Director Leon Lederman has announced a management reshuffle, effective from 1 October. The first 550 MeV proton bunches have been successfully extracted from the new Spallation Neutron Source at the Rutherford Appleton Laboratory, UK, at the first attempt.Lee Teng of Fermilab has been appointed Director of Taiwan's recently founded $30 million Synchrotron Radiation Research Centre, the island's first major large scale research project. A Protocol on cooperation between CERN and the Chinese Academy of Sciences was signed at CERN on 18 October by Zhao Guangzhao, a Vice-President of the Academy, and CERN Director General Herwig Schopper. The next Particle Accelerator Conference will be held in Vancouver, Canada, from 13-16 May 1985, organized by the TRIUMF Laboratory. Following the 1983 Santa Fe Conference, it will be the 11th in this biennial series devoted to all aspects of accelerator science, engineering and technology. From 3-14 September, the CERN Accelerator School organized (jointly with the Laboratoire de l'Accélérateur Linéaire, Orsay and the Laboratoire National Saturne, Saclay) a course on General Accelerator Physics at the Ecole Supérieure d'Electricité, Gif-sur-Yvette

BNL alternating gradient synchrotron with four helical magnets to minimize the losses of the polarized proton beam

Directory of Open Access Journals (Sweden)

N. Tsoupas

2013-04-01

Full Text Available The principle of using multiple partial helical magnets to preserve the polarization of the proton beam during its acceleration was applied successfully to the alternating gradient synchrotron (AGS which currently operates with two partial helical magnets. In this paper we further explore this idea by using four partial helical magnets placed symmetrically in the AGS ring. This provides many advantages over the present setup of the AGS, which uses two partial helical magnets. First, the symmetric placement of the four helical magnets and their relatively lower field of operation allows for better control of the AGS optics with reduced values of the beta functions especially near beam injection and allows both the vertical and horizontal tunes to be placed within the “spin tune gap,” therefore eliminating the horizontal and vertical intrinsic spin resonances of the AGS during the acceleration cycle. Second, it provides a wider spin tune gap. Third, the vertical spin direction during beam injection and extraction is closer to vertical. Although the spin tune gap, which is created with four partial helices, can also be created with a single or two partial helices, the high field strength of a single helical magnet which is required to generate such a spin tune gap makes the use of the single helical magnet impractical, and that of the two helical magnets rather difficult. In this paper we will provide results on the spin tune and on the optics of the AGS with four partial helical magnets, and compare them with those from the present setup of the AGS that uses two partial helical magnets. Although in this paper we specifically discuss the effect of the four partial helices on the AGS, this method which can eliminate simultaneously the vertical and horizontal intrinsic spin resonances is a general method and can be applied to any medium energy synchrotron which operates in similar energy range like the AGS and provides the required space to

Sixty Days Remaining, Forty Years of CERN, Two Brothers, One Exclusive Interview

CERN Multimedia

2001-01-01

Twins Marcel and Daniel Genolin while sharing memories of their CERN experiences, point out just how much smaller the Meyrin site once was. In a place such as CERN where the physical sciences are in many ways the essence of our daily lives and where technological advancement is an everyday occurrence, it is easy to lose track of the days, months, and even years. But last week twin brothers, Daniel and Marcel Genolin, hired in the early sixties and getting ready to end their eventful forty year CERN experiences, made it clear that the winds of time bluster past us whether we are aware or not. 'CERN was very small when we started' says Marcel, who has worked in transport during his entire time here. A lot has changed. 'When I got here there were no phones in peoples' houses' he recalls,'when there were problems in the control room with the PS (Proton Synchrotron) they used to get a megaphone and tell us {the transport service} to go and get the necessary physicists from their homes in the area. We had to lo...

People and things. CERN Courier, Sep 1991, v. 31(7)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1991-09-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: ; X-ray powder diffraction studies at the US National Synchrotron Light Source at Brookhaven have enabled US chemists to unravel the crystal structure of K{sub 3}C{sub 60} - one of the football-shaped 'buckminsterfullerene' supermolecules whose discovery was announced last year. The material is chemically a metal and is superconducting up to 19.3K.

People and things. CERN Courier, Sep 1991, v. 31(7)

International Nuclear Information System (INIS)

Anon.

1991-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: ; X-ray powder diffraction studies at the US National Synchrotron Light Source at Brookhaven have enabled US chemists to unravel the crystal structure of K 3 C 60 - one of the football-shaped 'buckminsterfullerene' supermolecules whose discovery was announced last year. The material is chemically a metal and is superconducting up to 19.3K

Heavy ion acceleration at the AGS

International Nuclear Information System (INIS)

Lee, Y.Y.

1989-01-01

The Brookhaven AGS is alternating gradient synchrotron, 807 meters in circumference, which was originally designed for only protons. Using the 15 MV Brookhaven Tandem Van de Graaff as an injector, the AGS started to accelerate heavy ions of mass lighter than sulfur. Because of the relatively poor vacuum (∼10 -8 Torr), the AGS is not able to accelerate heavier ions which could not be fully stripped of electrons at the Tandem energy. When the AGS Booster, which is under construction, is completed the operation will be extended to all species of heavy ions including gold and uranium. Because ultra-high vacuum (∼10 -11 Torr) is planned, the Booster can accelerate partially stripped elements. The operational experience, the parameters, and scheme of heavy ion acceleration will be presented in detail from injection to extraction, as well as future injection into the new Relativistic Heavy Ion Collider (RHIC). A future plan to improve intensity of the accelerator will also be presented. 5 figs., 4 tabs

Coupling Impedance of the CERN SPS beam position monitors

CERN Document Server

Salvant, B; Boccard, C; Caspers, Friedhelm; Grudiev, A; Jones, R; Métral, E; Rumolo, G; Zannini, C; Spataro, B; Alesini, D; Migliorati, M; Roncarolo, F; Calaga, R

2010-01-01

A detailed knowledge of the beam coupling impedance of the CERN Super Proton Synchrotron (SPS) is required in order to operate this machine with a higher intensity for the foreseen Large Hadron Collider (LHC) luminosity upgrade. A large number of Beam Position Monitors (BPMs) is currently installed in the SPS, and this is why their contribution to the SPS impedance has to be assessed. This paper focuses on electromagnetic (EM) simulations and bench measurements of the longitudinal and transverse impedance generated by the horizontal and vertical BPMs installed in the SPS machine.

Status of the SPL at CERN

CERN Document Server

Garoby, R

2007-01-01

The construction of the Large Hadron Collider at CERN is in its final phase, and commissioning with beam is scheduled to begin before the end of 2007. It is now time to prepare for increasing as much as possible the performance of this unique instrument to maximize the benefits for physics. An essential part of the proposed luminosity upgrade plan is the replacement of the CERN PS and its injectors by a 50 GeV proton synchrotron (PS2) and a 4 GeV superconducting linac (SPL). The design of the SPL has recently been updated and the optimization of its high-energy part will continue until ~2010. For the foreseen luminosity upgrade of the LHC a low-power version of the SPL (LP-SPL) is under study, which can be upgraded to a multi-megawatt machine providing beam to high-power proton users such as neutrino facilities and/or radio-active beam facilities. The construction start of the low-energy normal conducting SPL front-end, the 160 MeV "Linac4", is scheduled for January 2008, with the goal of being operational as...

People and things. CERN Courier, May 1979, v. 19(3)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1979-05-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news on upcoming or past events, for example the annual meeting of the High Energy Discussion Group. There will be reports of recent work at the AGS and for ISABELLE and future plans in these areas will be reviewed.

People and things. CERN Courier, May 1979, v. 19(3)

International Nuclear Information System (INIS)

Anon.

1979-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news on upcoming or past events, for example the annual meeting of the High Energy Discussion Group. There will be reports of recent work at the AGS and for ISABELLE and future plans in these areas will be reviewed

Design, Manufacture and Test of a 1.3 T / 10 Hz dipole model for Rapid Cycling Synchrotrons

CERN Document Server

Newborough, A

2013-01-01

The construction of a compact rapid cycling synchrotron has recently been studied at CERN to replace the first stage of its accelerator complex, the proton synchrotron booster. Although currently there are no plans to build this machine, fast cycled accelerator magnets are of general interest for numerous reasons. This has led to the design, manufacture and testing of a scaled model dipole as detailed in this paper to show the capability of producing and characterising a magnet design based on high-silicon content grain-oriented steel able to operate up to 1.3 T at 10 Hz.

Nondestructive analysis of silver in gold foil using synchrotron radiation X-ray fluorescence spectrometry

International Nuclear Information System (INIS)

Kasamatsu, Masaaki; Suzuki, Yasuhiro; Suzuki, Shinichi; Nakanishi, Toshio; Shimoda, Osamu; Nishiwaki, Yoshinori; Miyamoto, Naoki

2005-01-01

Small particles of gold foil detached from an indoor decoration might be important evidence to associate a suspect with a crime scene. We have investigated the application of elemental analysis using synchrotron radiation X-ray fluorescence spectrometry to discriminate small particles of gold foil. Eight kinds of gold foil samples collected in Japan were used in the experiments. As a result of synchrotron radiation X-ray fluorescence spectrometry, only two elements, gold and silver, were detected from all gold foil samples. The intensity ratios of AgK α /AuL α showed good correlation with the content ratios of Ag/Au. The variation of intensity ratio within a same sample was sufficiently small compared with those of different samples. Therefore the comparison of this intensity ratio can be an effective method to discriminate small particles originating from different types of gold foil. (author)

CERN: Fixed target targets

International Nuclear Information System (INIS)

Anon.

1993-01-01

Full text: While the immediate priority of CERN's research programme is to exploit to the full the world's largest accelerator, the LEP electron-positron collider and its concomitant LEP200 energy upgrade (January, page 1), CERN is also mindful of its long tradition of diversified research. Away from LEP and preparations for the LHC proton-proton collider to be built above LEP in the same 27-kilometre tunnel, CERN is also preparing for a new generation of heavy ion experiments using a new source, providing heavier ions (April 1992, page 8), with first physics expected next year. CERN's smallest accelerator, the LEAR Low Energy Antiproton Ring continues to cover a wide range of research topics, and saw a record number of hours of operation in 1992. The new ISOLDE on-line isotope separator was inaugurated last year (July, page 5) and physics is already underway. The remaining effort concentrates around fixed target experiments at the SPS synchrotron, which formed the main thrust of CERN's research during the late 1970s. With the SPS and LEAR now approaching middle age, their research future was extensively studied last year. Broadly, a vigorous SPS programme looks assured until at least the end of 1995. Decisions for the longer term future of the West Experimental Area of the SPS will have to take into account the heavy demand for test beams from work towards experiments at big colliders, both at CERN and elsewhere. The North Experimental Area is the scene of larger experiments with longer lead times. Several more years of LEAR exploitation are already in the pipeline, but for the longer term, the ambitious Superlear project for a superconducting ring (January 1992, page 7) did not catch on. Neutrino physics has a long tradition at CERN, and this continues with the preparations for two major projects, the Chorus and Nomad experiments (November 1991, page 7), to start next year in the West Area. Delicate neutrino oscillation effects could become

CERN: Fixed target targets

Energy Technology Data Exchange (ETDEWEB)

Anon.

1993-03-15

Full text: While the immediate priority of CERN's research programme is to exploit to the full the world's largest accelerator, the LEP electron-positron collider and its concomitant LEP200 energy upgrade (January, page 1), CERN is also mindful of its long tradition of diversified research. Away from LEP and preparations for the LHC proton-proton collider to be built above LEP in the same 27-kilometre tunnel, CERN is also preparing for a new generation of heavy ion experiments using a new source, providing heavier ions (April 1992, page 8), with first physics expected next year. CERN's smallest accelerator, the LEAR Low Energy Antiproton Ring continues to cover a wide range of research topics, and saw a record number of hours of operation in 1992. The new ISOLDE on-line isotope separator was inaugurated last year (July, page 5) and physics is already underway. The remaining effort concentrates around fixed target experiments at the SPS synchrotron, which formed the main thrust of CERN's research during the late 1970s. With the SPS and LEAR now approaching middle age, their research future was extensively studied last year. Broadly, a vigorous SPS programme looks assured until at least the end of 1995. Decisions for the longer term future of the West Experimental Area of the SPS will have to take into account the heavy demand for test beams from work towards experiments at big colliders, both at CERN and elsewhere. The North Experimental Area is the scene of larger experiments with longer lead times. Several more years of LEAR exploitation are already in the pipeline, but for the longer term, the ambitious Superlear project for a superconducting ring (January 1992, page 7) did not catch on. Neutrino physics has a long tradition at CERN, and this continues with the preparations for two major projects, the Chorus and Nomad experiments (November 1991, page 7), to start next year in the West Area. Delicate neutrino oscillation effects could become visible for the first

People and things. CERN Courier, Mar 1985, v. 25(2)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1985-03-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The main decisions taken at the eleventh meeting of the International Committee for Future Accelerators (ICFA) - held last October at the Leningrad Institute of Nuclear Physics, Gatchina - concerned the setting up of the four international panels which were proposed and agreed at the ICFA Seminar held at the Japanese KEK Laboratory earlier in the year. On 14 January the last of the 48 bending magnets of DESY-II, the new 9 GeV injection synchrotron for electrons and positrons, was installed in the tunnel of the 20 year-old DESY synchrotron in Hamburg. An international history symposium on 'Particle Physics in the 1950s: pions to quarks,' will be held at Fermilab in Batavia, Illinois on 1-4 May 1985.

People and things. CERN Courier, Mar 1985, v. 25(2)

International Nuclear Information System (INIS)

Anon.

1985-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The main decisions taken at the eleventh meeting of the International Committee for Future Accelerators (ICFA) - held last October at the Leningrad Institute of Nuclear Physics, Gatchina - concerned the setting up of the four international panels which were proposed and agreed at the ICFA Seminar held at the Japanese KEK Laboratory earlier in the year. On 14 January the last of the 48 bending magnets of DESY-II, the new 9 GeV injection synchrotron for electrons and positrons, was installed in the tunnel of the 20 year-old DESY synchrotron in Hamburg. An international history symposium on 'Particle Physics in the 1950s: pions to quarks,' will be held at Fermilab in Batavia, Illinois on 1-4 May 1985

CAS course on Intensity Limitations in Particle Beams at CERN

CERN Multimedia

CERN Accelerator School

2015-01-01

The CERN Accelerator School (CAS) recently organised a specialised course on Intensity Limitations in Particle Beams, at CERN from 2 to 11 November, 2015.     Many accelerators and storage rings, whether intended for particle physics experiments, synchrotron light sources or industrial applications, require beams of high brightness and the highest possible intensities. A good understanding of the possible limitations is required to achieve the desired performance. This course covered the interaction of beams with their surroundings and with other beams, as well as further collective effects. The lectures on the effects and possible mitigations were complemented by tutorials. The course was very successful, with 66 students representing 14 nationalities attending. Most participants came from European counties, but also from Armenia, China and Russia. Feedback from the participants was positive, reflecting the standard of the lectures and teaching. In addition to the academic pro...

CERN PS Optical Properties Measured with Turn-By-Turn Orbit Data

CERN Document Server

Bach, T; Giovannozzi, M; Hernalsteens, C; Lachaize, A; Sterbini, G; Tom´as, R; Wasef, R

2013-01-01

The performance of the CERN Proton Synchrotron (PS) has been constantly increasing over the years both in terms of beam parameters (intensity and brightness) and beam manipulations (transverse and longitudinal splitting). This implies a very good knowledge of the linear and non-linear model of the ring. In this paper we report on a detailed campaign of beam measurements based on turn-by-turn orbit data aimed at measuring the optics in several conditions as well as the resonance driving terms.

The operational status of the Booster injector for the AGS accelerator complex at BNL

International Nuclear Information System (INIS)

Ahrens, L.; Bleser, E.; Brennan, J.M.; Gardner, C.; Gill, E.; Glenn, J.W.; Reece, K.; Roser, T.; van Asselt, W.; Weng, W.T.

1992-01-01

The Booster synchrotron at Brookhaven National Laboratory has been incorporated into the accelerator chain at the Alternating Gradient Synchrotron (AGS) complex. After a successful first commissioning effort in the spring of 1991, the Booster has been part of this year's silicon, gold and proton physics runs. After a brief review of the Booster design goals, and of the early commissioning, this paper will summarize this year's activities

Model based controls and the AGS booster controls system architecture

International Nuclear Information System (INIS)

Casella, R.A.

1987-01-01

For the past three years the Accelerator Controls Section has been responsible for the development of the Heavy Ion Transfer Line (HITL) used to inject heavy ions created at the Tandem Van de Graaff into the Alternating Gradient Synchrotron (AGS). This was recognized as an opportunity to test new ideas for control of a beam line, which if successful, could be implemented in an upgrade of the existing control system for the AGS. The in place control system for the AGS consisted of DEC PDP10 computer as the primary computer interface to the accelerator via three control room consoles, and keeper of the device database. For the HITL project it was decided to make the control system a true distributed network putting more computing power down at the device level via intelligent subsystems. A network of Apollo workstations was added at the host level. Apollos run a distributed operating system and are connected to each other by the Domain Token Ring Network. The Apollos were seen as the new primary computers for consoles with each console containing at least one Apollo. These hosts and all other subsystems are connected to each other via an in house developed LAN (RELWAY). The design of the control system developed for HITL was mostly successful. The proposed AGS Booster is designed to be a synchrotron injector for the AGS. With the forthcoming development of the Booster for the AGS an opportunity has again developed to implement new ideas for accelerator control. One weakness of the HITL control system is the limited cpu power and poor debugging facilities of the stations

Luminescent properties of LuAG:Yb and YAG:Yb single crystalline films grown by Liquid Phase Epitaxy method

International Nuclear Information System (INIS)

Zorenko, Yu; Zorenko, T.; Gorbenko, V.; Voznyak, T.; Popielarski, P.; Batentschuk, M.; Osvet, A.; Brabec, Ch; Kolobanov, V.; Spasky, D.; Fedorov, A.

2016-01-01

In this work, investigation of the spectroscopic parameters of the luminescence of Yb"3"+ ions in single crystalline films of Lu_3Al_5O_1_2 and Y_3Al_5O_1_2 garnets was performed using the synchrotron radiation excitation with the energy in the range of Yb"3"+ charge transitions (CT), exciton range and the onset of interband transitions of these garnets. The basic spectroscopic parameters of the Yb"3"+ CT luminescence in LuAG and YAG hosts were determined and summarized with taking into account the differences in the band gap structure of these garnets. - Highlights: • Single crystalline films of Yb doped LuAG and YAG garnets were grown by LPE method. • Yb"3"+ luminescence of LuAG:Yb and YAG:Yb film were studied using synchrotron radiation. • Basic parameters of Yb"3"+ charge transfer luminescence in LuAG and YAG were determined.

John Adams and CERN: Personal Recollections

CERN Document Server

Brianti, Giorgio

2013-01-01

By any standards, John Adams had a most remarkable career. He was involved in three important, emerging technologies, radar, particle accelerators and controlled fusion, and had an outstanding impact on the last two. Without a university education, he attained hierarchical positions of the highest level in prestigious national and international organizations. This article covers the CERN part of his career, by offering some personal insights into the different facets of his contributions to major accelerator projects, from the first strong-focusing synchrotron, the PS, to the SPS and its conversion to a proton–antiproton collider. In particular, it outlines his abilities as a leader of an international collaboration, which has served as an example for international initiatives in other disciplines.

CAS - CERN Accelerator School and ALBA Synchrotron Light Facility : Course on Vacuum in Accelerators

CERN Document Server

Vacuum in Accelerators

2007-01-01

These proceedings present the lectures given at the twentieth specialized course organized by the CERN Accelerator School (CAS), the topic being Vacuum in Accelerators. The course was held in Platja d’Aro, Spain, from 16 to 24 May 2006. A similar course took place in Snekersten, Denmark, in 1999, with proceedings published as CERN 99-05. After an interval of seven years, the aim of this course was to present a review of the actual state of the art and to highlight the latest developments in the field. The lectures start with a general overview of vacuum, accelerators and cryogenics followed by a more detailed review of the basic principles concerning thermal and non-thermal outgassing. More specialized lectures are then proposed on gas dynamics, on the interaction of energetic particles with matter, and on beam–gas collisions. The production and measurement of vacuum is addressed in subsequent lectures on pumps and vacuum gauges which present a detailed view of the materials currently used in accelerators...

Towards the first collection of 44Sc at CERN MEDICIS

CERN Document Server

Dewit, Bertrand; Dockx, Kristof

CERN MEDICIS (Medical Isotopes Collected form ISOLDE) is a new facility at CERN, with the aim to extract and collect a large range of radioactive isotopes for research and development in medical applications. The ISOLDE (Isotope Separation On-Line Device) facility receives 1.4 GeV protons from the Proton Synchrotron Booster (PSB) where they impinge a target. However, about 85% of them transverse the target without interacting. By placing the MEDICIS target behind the ISOLDE target, a second life is given to these protons. The nuclear interactions inside the target result in a large variety of isotopes. After the irradiation stage, the target is transported to the MEDICIS facility where the off-line extraction is carried out and the radioactive isotope of interest is collected. The facility includes an experimental hall where employees will be working, even during a batch collection. Since we will be dealing with high activities in the target and the collection point it is of vital importance to evaluate the f...

People and things. CERN Courier, December 1983, v. 23(10)

International Nuclear Information System (INIS)

Anon.

1983-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. A portable 8 MeV electron linac has been developed at Los Alamos National Laboratory with a view to applications in radiography, particularly in the area of non-destructive examinations in the construction industry. The electron beam produces X-rays from a metal target and can also provide a beam of neutrons. At Stanford, two new beamlines are to be added to the SPEAR ring to provide additional facilities for basic research using synchrotron radiation. Organized in collaboration with the University of Bergen, the 1984 CERN School of Physics will be held from 11-24 June at Loftus/ Hardanger, Norway. The School is intended for young experimental physicists with at least one year of research experience, and aims to teach various aspects of high energy physics, especially theory

People and things. CERN Courier, Mar 1984, v. 24(2)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1984-03-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. Some time ago, Wolfgang ('Pief') Panofsky, Director of SLAC since 1961 and one of the prime movers behind both the famous two-mile electron linac and the Laboratory itself, announced his intention to step down in 1984. Immediately a search began for a worthy successor. Carlo Rubbia, leader of the UA 1 experiment at CERN which last year discovered the W and Z particles, was named by the US science magazine 'Discover' as its 1983 'Scientist of the Year'. A CERN-ECFA Workshop to study the feasibility of hadron colliders which it might at some time in the future be possible to install in the LEP tunnel, is to be held at the University of Lausanne from 21-24 March. Fermilab will host the 1984 US Summer School on High Energy Particle Accelerators from 13-24 August - the fourth in this series of summer schools.The 1984 CERN School of Computing, the eighth in the biennial series, is being organized in collaboration with the Instituto Estudios Energeticos (Junta de Energia Nuclear, Madrid) and the Facultad de Informatica, Barcelona, and will be held from 9-22 September at Aiguablava, Spain. The 1984 Users' Meeting of the High Energy Discussion Group (HEDG) at Brookhaven on 29-31 March will include a Workshop on the possible physics from an improved Alternating Gradient Synchrotron.

Beam-loss induced pressure rise of Large Hadron Collider collimator materials irradiated with 158 GeV/u $In^{49+}$ ions at the CERN Super Proton Synchrotron

CERN Document Server

Mahner, Edgar; Hansen, Jan; Page, Eric; Vincke, H

2004-01-01

During heavy ion operation, large pressure rises, up to a few orders of magnitude, were observed at CERN, GSI, and BNL. The dynamic pressure rises were triggered by lost beam ions that impacted onto the vacuum chamber walls and desorbed about 10/sup 4/ to 10/sup 7/ molecules per ion. The deterioration of the dynamic vacuum conditions can enhance charge-exchange beam losses and can lead to beam instabilities or even to beam abortion triggered by vacuum interlocks. Consequently, a dedicated measurement of heavy-ion induced molecular desorption in the GeV/u energy range is important for Large Hadron Collider (LHC) ion operation. In 2003, a desorption experiment was installed at the super proton synchrotron to measure the beam-loss induced pressure rise of potential LHC collimator materials. Samples of bare graphite, sputter coated (Cu, TiZrV) graphite, and 316 LN (low carbon with nitrogen) stainless steel were irradiated under grazing angle with 158 GeV/u indium ions. After a description of the new experimental ...

High-pressure x-ray diffraction of icosahedral Zr-Al-Ni-Cu-Ag quasicrystals

DEFF Research Database (Denmark)

Jiang, Jianzhong; Saksl, Karel; Rasmussen, Helge Kildahl

2001-01-01

temperature using synchrotron radiation. The icosahedral quasicrystal structure is retained up to the highest hydrostatic pressure used (approximately 28 GPa) and is reversible after decompression. The bulk modulus at zero pressure and its pressure derivative of the icosahedral Zr-Al-Ni-Cu-Ag quasicrystal......The effect of pressure on the structural stability of icosahedral Zr-Al-Ni-Cu-Ag quasicrystals forming from a Zr65Al7.5Ni10Cu7.5Ag10 metallic glass with a supercooled liquid region of 44 K has been investigated by in situ high-pressure angle-dispersive x-ray powder diffraction at ambient......-Al-Ni-Cu-Ag quasicrystals induced by pressure....

First Tuesday @ CERN: Industrial Impact of Information Technology from CERN

CERN Multimedia

CERN. Geneva

2004-01-01

CERN is where the web was born, and remains a hothouse of innovation in information technology (IT). In this fourth First Tuesday @ CERN, we look at industrial partnership at CERN in the IT area from several different angles. The approach taken by CERN with software licencing - a very hot topic in the world of IT - will be discussed. The benefits that CERN hardware and software suppliers gain from working with CERN will be presented, and the CERN openlab, a new approach to industrial partnership at CERN, will be covered. A novel ingredient of this First Tuesday @ CERN is that it will be run in parallel with a similar event for the business community in London, and there will be webcast presentations between the Queen Elizabeth II Conference Centre in London and CERN during the event. Thus, First Tuesday @ CERN will take on a truly European dimension, to reflect CERN's European character.

CERN/KEK: Very high accelerating gradients

Energy Technology Data Exchange (ETDEWEB)

Anon.

1993-01-15

Full text: A world-wide effort is under way to develop linear electron-positron colliders so that physics experiments can be extended into a range of energies where circular machines (necessarily much larger than CERN's 27-kilometre LEP machine) would be crippled by synchrotron radiation. CERN is studying the feasibility of building a 2 TeV machine called CLIC powered not by individual klystrons, but by a high intensity electron 'drive' linac running parallel to the main linac (November 1990, page 7). This drive linac will itself be powered by similar superconducting cavities to those developed for LEP. A high gradient is an obvious design aim for any future high energy linear collider because it makes it shorter and therefore cheaper - the design figure for the CLIC machine is 80 MV/m. The CLIC study group has taken a significant step forward in demonstrating the technical feasibility of their machine by achieving peak and average accelerating gradients of 137 MV/m and 84 MV/m respectively in a short section of accelerating structure during high gradient tests at the Japanese KEK Laboratory last year. This result obtained within the framework of a CERN/KEK collaboration on linear colliders was obtained using a 20-cell accelerating section built at CERN using state-of the- art technology which served both as a model for CLIC studies as well as a prototype for the Japanese Linear Collider studies. The operating frequency of the model accelerating section is 2.6 times lower than the CLIC frequency but was chosen because a high power r.f. source and pulse compression scheme has been developed for this frequency at KEK. Testing CLIC models at 11.4 GHz is however more stringent than at 30 GHz because the chance of electrical breakdown increases as the frequency is lowered. This recent result clearly demonstrates that a gradient of 80 MV/m is feasible.

CERN/KEK: Very high accelerating gradients

International Nuclear Information System (INIS)

Anon.

1993-01-01

Full text: A world-wide effort is under way to develop linear electron-positron colliders so that physics experiments can be extended into a range of energies where circular machines (necessarily much larger than CERN's 27-kilometre LEP machine) would be crippled by synchrotron radiation. CERN is studying the feasibility of building a 2 TeV machine called CLIC powered not by individual klystrons, but by a high intensity electron 'drive' linac running parallel to the main linac (November 1990, page 7). This drive linac will itself be powered by similar superconducting cavities to those developed for LEP. A high gradient is an obvious design aim for any future high energy linear collider because it makes it shorter and therefore cheaper - the design figure for the CLIC machine is 80 MV/m. The CLIC study group has taken a significant step forward in demonstrating the technical feasibility of their machine by achieving peak and average accelerating gradients of 137 MV/m and 84 MV/m respectively in a short section of accelerating structure during high gradient tests at the Japanese KEK Laboratory last year. This result obtained within the framework of a CERN/KEK collaboration on linear colliders was obtained using a 20-cell accelerating section built at CERN using state-of the- art technology which served both as a model for CLIC studies as well as a prototype for the Japanese Linear Collider studies. The operating frequency of the model accelerating section is 2.6 times lower than the CLIC frequency but was chosen because a high power r.f. source and pulse compression scheme has been developed for this frequency at KEK. Testing CLIC models at 11.4 GHz is however more stringent than at 30 GHz because the chance of electrical breakdown increases as the frequency is lowered. This recent result clearly demonstrates that a gradient of 80 MV/m is feasible

The AGS Booster main ring power supply system

International Nuclear Information System (INIS)

Soukas, A.; Hughes, K.; Sandberg, J.; Toldo, F.; Zhang, S.Y.

1989-01-01

The AGS Booster is being designed as a very versatile particle accelerator. Its primary function is to be a high quality injector to the currently operating Alternating Gradient Synchrotron (AGS). The Booster/AGS combination will produce proton intensities greater than 5 x 10 13 protons per pulse (ppp), and accelerate heavy ions, with mass up to 200, to a maximum energy of 15 GeV per atomic mass unit (GeV/amu). The power supply for the Booster Main Ring (BMRPS) has to accommodate a wide range of cycles and a wide range of operating parameters. The cycles range from storage for several seconds to rapid cycling at 7.5 Hz. The peak output power is 18 MW. This paper will describe the AGS Booster machine powering requirements, the choice of power supply, the a.c. circuit tie-in and its associated problems and some of the details of the design of the BMRPS. 9 refs., 2 figs

First Tuesday @ CERN: Industrial Impact of Information Technology from CERN

CERN Multimedia

CERN. Geneva

2004-01-01

CERN is where the web was born, and remains a hothouse of innovation in information technology (IT). In this fourth First Tuesday @ CERN, we look at industrial partnership at CERN in the IT area from several different angles. The approach taken by CERN with software licencing - a very hot topic in the world of IT - will be discussed. The benefits that CERN hardware and software suppliers gain from working with CERN will be presented, and the CERN openlab, a new approach to industrial partnership at CERN, will be covered. A novel ingredient of this First Tuesday @ CERN is that it will be run in parallel with a similar event for the business community in London, and there will be webcast presentations between the Queen Elizabeth II Conference Centre in London and CERN during the event. Thus, First Tuesday @ CERN will take on a truly European dimension, to reflect CERN's European character. More information: http://www.rezonance.ch, or view the joint UK event program

People and things. CERN Courier, Sep 1979, v. 19(6)

International Nuclear Information System (INIS)

Anon.

1979-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news on upcoming or past events, for example the start of construction of the Fermilab Energy Saver, the Nobel physicists meet in Lindau and the Workshop on Neutrino Bubble Chamber Physics at Tevatron Energies. Furthermore the 12.5 GeV Zero Gradient Synchrotron at the Argonne National Laboratory will close down after sixteen years of operation for high energy physics experiments. To mark the occasion a Symposium on the History of the ZGS is being organized at Argonne on 13-14 September

People and things. CERN Courier, Sep 1979, v. 19(6)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1979-09-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news on upcoming or past events, for example the start of construction of the Fermilab Energy Saver, the Nobel physicists meet in Lindau and the Workshop on Neutrino Bubble Chamber Physics at Tevatron Energies. Furthermore the 12.5 GeV Zero Gradient Synchrotron at the Argonne National Laboratory will close down after sixteen years of operation for high energy physics experiments. To mark the occasion a Symposium on the History of the ZGS is being organized at Argonne on 13-14 September.

Important changes for cern.market and other newsgroups at CERN

CERN Multimedia

2007-01-01

The "cern.market" is moving to the web! You should now use http://cern.ch/cern.market to read and post messages. After 25 June it will no longer be possible to post messages from a newsreader. More generally, the CERN newsgroup service (news.cern.ch) will be progressively decommissioned in June/July 2007. The newsgroup functionality for CERN discussion forums such as the cern.market is moving to web-based discussion forums and RSS feeds. As of 9 July, public services will need to be used to access public newsgroups (those not starting with "cern"), as the internal news.cern.ch server will cease to provide them. Please read http://cern.ch/mail/help/?fdid=33 for more information. The Mail Services team

Early history of the Cosmotron and AGS at Brookhaven

International Nuclear Information System (INIS)

Courant, E.D.

1989-01-01

Early work is described on the design and construction of the two Brookhaven particle accelerators of the 1950s, the Cosmotron and the AGS (alternating-gradient synchrotron). The Cosmotron, finished by the Spring of 1952, was the smaller machine reaching 3GeV and was the first to pass the billion electron volt mark. Suggested alterations to magnet orientations meant that the alternating gradients produced would stabilize the design. This ''strong-focusing'' idea was central to the second AGS machine, which also overcame the problems of resonances and transition energy, with the inclusion of an electron analog accelerator. (UK)

Simulations of Various Driving Mechanisms for the 3rd Order Resonant Extraction from the MedAustron Medical Synchrotron

CERN Document Server

Feldbauer, G; Dorda, U

2011-01-01

The MedAustron medical synchrotron is based on the CERN-PIMMS design and its technical implementation by CNAO [1]. This document elaborates on studies performed on the baseline betatron-core driven extraction method and investigates the feasibility of alternative resonance driving mechanisms like RF-knockout, RF-noise and the lattice tune. Single particle tracking results are presented, explained and compared to analytical results.

Important changes for cern.market and other newsgroups at CERN

CERN Multimedia

2007-01-01

The "cern.market" is moving to the web! You should now use http://cern.ch/cern.market to read and post messages. After 25 June it will no longer be possible to post messages from a newsreader. More generally, the CERN newsgroup service (news.cern.ch) will be progressively decommissioned in June/July 2007. The newsgroup functionality for CERN discussion forums such as the cern.market is moving to web-based discussion forums and RSS feeds. As of 9 July, public services will need to be used to access public newsgroups (those not starting with "cern"), as the internal news.cern.ch server will cease to provide them. Please read go there for more information. The Mail Services team

CERN Technical Training 2006: ANSYS Course Sessions (August-September 2006)

CERN Multimedia

Davide Vitè

2006-01-01

If you wish to participate in one of the following courses, please tell to your supervisor and apply electronically from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training'form available from your Departmental Secretariat or from your DTO (Departmental Training Officer). Applications will be accepted in the order in which they are received. The following ANSYS course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2006, and in collaboration with CAD-FEM AG (CH): ANSYS DesignModeler (course in French): 29-30.8.2006 (2 days) ANSYS Workbench (course in French): 12-15.9.2006 (4 days, only 3 places available) If you are interested in attending any of the above course sessions, please discuss with your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at http://cta.cern.ch/cta2/f?p=300 under 'Upcoming course sessions', with th...

People and things. CERN Courier, Mar 1984, v. 24(2)

International Nuclear Information System (INIS)

Anon.

1984-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. Some time ago, Wolfgang ('Pief') Panofsky, Director of SLAC since 1961 and one of the prime movers behind both the famous two-mile electron linac and the Laboratory itself, announced his intention to step down in 1984. Immediately a search began for a worthy successor. Carlo Rubbia, leader of the UA 1 experiment at CERN which last year discovered the W and Z particles, was named by the US science magazine 'Discover' as its 1983 'Scientist of the Year'. A CERN-ECFA Workshop to study the feasibility of hadron colliders which it might at some time in the future be possible to install in the LEP tunnel, is to be held at the University of Lausanne from 21-24 March. Fermilab will host the 1984 US Summer School on High Energy Particle Accelerators from 13-24 August - the fourth in this series of summer schools.The 1984 CERN School of Computing, the eighth in the biennial series, is being organized in collaboration with the Instituto Estudios Energeticos (Junta de Energia Nuclear, Madrid) and the Facultad de Informatica, Barcelona, and will be held from 9-22 September at Aiguablava, Spain. The 1984 Users' Meeting of the High Energy Discussion Group (HEDG) at Brookhaven on 29-31 March will include a Workshop on the possible physics from an improved Alternating Gradient Synchrotron

Environmental and safety issues associated with a 30-GeV proton synchrotron

International Nuclear Information System (INIS)

Lessard, E.T.

1999-01-01

This paper summarizes activation of materials, radioactive waste, sky-shine radiation, groundwater radioactivity, airborne radioactivity, beam faults, exposure of staff, and the environmental performance indicator for a high-energy synchrotron-accelerator-complex on Long Island, New York. Groundwater contamination is a particularly sensitive area of concern. The Laboratory site is located over an EPA designated sole-source aquifer system and there is significant public concern over 3 H in on-site groundwater. This paper is intended to give you information about the environmental impacts of one portion of Laboratory operations: the Alternating Gradient Synchrotron (AGS) complex of accelerators that deliver protons and heavy-ions to the high-energy physics and nuclear physics communities. copyright 1999 American Institute of Physics

Environmental and safety issues associated with a 30-GeV proton synchrotron

International Nuclear Information System (INIS)

Lessard, E. T.

1999-01-01

This paper summarizes activation of materials, radioactive waste, sky-shine radiation, groundwater radioactivity, airborne radioactivity, beam faults, exposure of staff, and the environmental performance indicator for a high-energy synchrotron-accelerator-complex on Long Island, New York. Groundwater contamination is a particularly sensitive area of concern. The Laboratory site is located over an EPA designated sole-source aquifer system and there is significant public concern over 3 H in on-site groundwater. This paper is intended to give you information about the environmental impacts of one portion of Laboratory operations: the Alternating Gradient Synchrotron (AGS) complex of accelerators that deliver protons and heavy-ions to the high-energy physics and nuclear physics communities

Measurements and FLUKA simulations of bismuth and aluminium activation at the CERN Shielding Benchmark Facility (CSBF)

Science.gov (United States)

Iliopoulou, E.; Bamidis, P.; Brugger, M.; Froeschl, R.; Infantino, A.; Kajimoto, T.; Nakao, N.; Roesler, S.; Sanami, T.; Siountas, A.

2018-03-01

The CERN High Energy AcceleRator Mixed field facility (CHARM) is located in the CERN Proton Synchrotron (PS) East Experimental Area. The facility receives a pulsed proton beam from the CERN PS with a beam momentum of 24 GeV/c with 5 ṡ1011 protons per pulse with a pulse length of 350 ms and with a maximum average beam intensity of 6.7 ṡ1010 p/s that then impacts on the CHARM target. The shielding of the CHARM facility also includes the CERN Shielding Benchmark Facility (CSBF) situated laterally above the target. This facility consists of 80 cm of cast iron and 360 cm of concrete with barite concrete in some places. Activation samples of bismuth and aluminium were placed in the CSBF and in the CHARM access corridor in July 2015. Monte Carlo simulations with the FLUKA code have been performed to estimate the specific production yields for these samples. The results estimated by FLUKA Monte Carlo simulations are compared to activation measurements of these samples. The comparison between FLUKA simulations and the measured values from γ-spectrometry gives an agreement better than a factor of 2.

Optimization of AGS Polarized Proton Operation with the Warm Helical Snake

CERN Document Server

Takano, Junpei; Bai, Mei; Brown, Kevin A; Gardner, Chris J; Glenn, Joseph; Hattori, Toshiyuki; Huang, Haixin; Luccio, Alfredo U; MacKay, William W; Okamura, Masahiro; Roser, Thomas; Tepikian, Steven; Tsoupas, Nicholaos

2005-01-01

A normal conducting helical dipole partial Siberian snake (Warm Snake) has been installed in the Alternating Gradient Synchrotron (AGS) at Brookhaven National Laboratory (BNL) for overcoming all of imperfection depolarizing resonances and reducing the transverse coupling resonances caused by the solenoidal Siberian snake which had been operated in AGS before the last polarized run. The polarized proton beam has been accelerated successfully with the warm snake and the polarization at extraction of the AGS was increased to 50% as opposed to 40% with the solenoidal snake. The magnetic field and beam trajectory in the warm snake was calculated by using the OPERA-3D/TOSCA software. We present optimization of the warm snake with beam during RUN5.

Measurements of hyperon semileptonic decays at the CERN Super Proton Synchrotron

International Nuclear Information System (INIS)

Bourquin, M.; Chatelus, Y.; Brown, R.M.

1983-06-01

Results on five different hyperon semileptonic decays from the WA2 experiment, performed in the CERN SPS charged hyperon beam, have been analysed within the framework of the Cabibbo model. For the first time, the inconsistencies, which inevitably occur when the results from different experiments are combined, have been avoided in these comprehensive fits to high statistics data from a single hyperon decay experiment. Excellent agreement with the basic Cabibbo model has been obtained using the WA2 data either alone or together with neutron lifetime measurements. These results contrast strongly with other recent Cabibbo analyses which have indicated the presence of SU(3) breaking effects. Using additional information on ft values for superallowed nuclear Fermi transitions, an upper limit on the mixing parameter sintheta 3 in the Kobayashi-Maskawa six quark scheme has been obtained. (author)

The Rapid Cycling Synchrotron of the EURISOL Beta-Beam facility

CERN Document Server

Lachaize, A

During the last two years, several upgrades of the initial baseline scenario were studied with the aim of increasing the average intensity of ion beams in the accelerator chain of the Beta Beam complex. This is the reason why the Rapid Cycling Synchrotron (RCS) specifications were reconsidered many times.General considerations on the optical design were presented at the Beta Beam Task Meetings held at CERN and at Saclay in 2005 (http://beta-beam.web.cern.ch/beta-beam/). More detailed beam optics studies were performed during the next months. Lattices, RF system parameters, multi-turn injection scheme, fast extraction, closed orbit correction and chromaticity correction systems were proposed for different versions of the RCS.Finally, the RCS specifications have stabilized in November 2006 after the fourth Beta Beam Task Meeting when it was decided to fix the maximum magnetic rigidity of ion beams to 14.47 T.m (3.5 GeV equivalent proton energy) and to adopt a ring physical radius of 40 m in order to facilitat...

The on-line repair, improvement and expansion of a working multicomputer control system for the CERN SPS accelerator

International Nuclear Information System (INIS)

Altaber, J.; Beck, F.; Collins, M.; Crowley-Milling, M.C.; Rausch, R.

1979-01-01

The 400 GeV proton synchrotron at CERN was first commissioned in 1976. Those of its features which are pertinent to the design of the control system are summarized. The paper then proceeds as follows: changes to the control system (changes to applications programs, equipment handling routines, system software changes); hardware increases and repairs; changes to the character of the system (hardware changes, microprocessors); conclusions. (U.K.)

The Upgrade of the Control System for the CERN/NA62 Liquid Krypton Detector

CERN Document Server

Moraux, A; Bremer, J; Falaleev, V; Gonidec, A; Passardi, Giorgio; Pezzetti, M

2009-01-01

The NA62 experiment is a continuation of the CERN kaon research program and particularly of the NA48 experiment which was designed in the early 90’s to measure the direct CP violation with a very high precision. An important component of the experimental setup is an electromagnetic calorimeter filled with 9000 liters of high-purity liquid krypton at 120 K. Its associated cryogenic system aims at providing a very high reliability and stable thermal conditions with temperature stabilization better than 0.1 K. The upgrade of the cryogenic control system was motivated by the need of ensuring its durability and standardization for the long term fixed-target physics program at the CERN Super Proton Synchrotron (SPS). This paper describes the adopted technical solutions to minimize the control shutdown and emphasizes the related safety issues.

A possible biomedical facility at the European Organization for Nuclear Research (CERN).

Science.gov (United States)

Dosanjh, M; Jones, B; Myers, S

2013-05-01

A well-attended meeting, called "Brainstorming discussion for a possible biomedical facility at CERN", was held by the European Organization for Nuclear Research (CERN) at the European Laboratory for Particle Physics on 25 June 2012. This was concerned with adapting an existing, but little used, 78-m circumference CERN synchrotron to deliver a wide range of ion species, preferably from protons to at least neon ions, with beam specifications that match existing clinical facilities. The potential extensive research portfolio discussed included beam ballistics in humanoid phantoms, advanced dosimetry, remote imaging techniques and technical developments in beam delivery, including gantry design. In addition, a modern laboratory for biomedical characterisation of these beams would allow important radiobiological studies, such as relative biological effectiveness, in a dedicated facility with standardisation of experimental conditions and biological end points. A control photon and electron beam would be required nearby for relative biological effectiveness comparisons. Research beam time availability would far exceed that at other facilities throughout the world. This would allow more rapid progress in several biomedical areas, such as in charged hadron therapy of cancer, radioisotope production and radioprotection. The ethos of CERN, in terms of open access, peer-reviewed projects and governance has been so successful for High Energy Physics that application of the same to biomedicine would attract high-quality research, with possible contributions from Europe and beyond, along with potential new funding streams.

Materials research utilizing NSLS [National Synchrotron Light Source]: Progress report

International Nuclear Information System (INIS)

Liedl, G.L.

1986-08-01

Research was conducted using NSLS synchrotron radiation on the following: decomposition kinetics of a supersaturated Ni-Si alloy, hexane monolayers on graphite, layering of Fe(CO) 5 on graphite, charge density waves, aging of Al-Li, superlattices in ternary MBE-grown semiconductor films, phase transformation in Cu-Be and Al-Zn, microstructural changes in complex alloys, diffuse x-ray scattering, ion conduction in Ag-Ge-Se glass, organic monolayers of the Langmuir Blodgett type, and residual stress in coating

CERN: TeV Electron-Positron Linear Collider Studies; More polarization in LEP

Energy Technology Data Exchange (ETDEWEB)

Anon.

1993-09-15

The world's highest energy electronpositron collider - CERN's LEP, with a circumference of 27 kilometres - will also be the last such machine to be built as a storage ring. With interest growing in electronpositron physics at energies beyond those attainable at LEP, the next generation of electron-positron colliders must be linear if prohibitive synchrotron radiation power losses are to be avoided. Very high energy linear colliders present many technical challenges but mastery of SLC at Stanford, the world's first electron-positron linear collider, is encouraging. The physics issues of a linear collider have been examined by the international community in ICFA workshops in Saariselka, Finland (September 1991) and most recently in Hawaii (April 1993). The emerging consensus is for a collider with an initial collision energy around 500 GeV, and which can be upgraded to over 1 TeV. A range of very different collider designs are being studied at Laboratories in Europe, the US, Japan and Russia. Following the report of the 1987 CERN Long Range Planning Committee chaired by Carlo Rubbia, studies for a 2 TeV linear collider have progressed at CERN alongside work towards the Laboratory's initial objective - the LHC high energy proton-proton collider in the LEP tunnel.

CERN: TeV Electron-Positron Linear Collider Studies; More polarization in LEP

International Nuclear Information System (INIS)

Anon.

1993-01-01

The world's highest energy electronpositron collider - CERN's LEP, with a circumference of 27 kilometres - will also be the last such machine to be built as a storage ring. With interest growing in electronpositron physics at energies beyond those attainable at LEP, the next generation of electron-positron colliders must be linear if prohibitive synchrotron radiation power losses are to be avoided. Very high energy linear colliders present many technical challenges but mastery of SLC at Stanford, the world's first electron-positron linear collider, is encouraging. The physics issues of a linear collider have been examined by the international community in ICFA workshops in Saariselka, Finland (September 1991) and most recently in Hawaii (April 1993). The emerging consensus is for a collider with an initial collision energy around 500 GeV, and which can be upgraded to over 1 TeV. A range of very different collider designs are being studied at Laboratories in Europe, the US, Japan and Russia. Following the report of the 1987 CERN Long Range Planning Committee chaired by Carlo Rubbia, studies for a 2 TeV linear collider have progressed at CERN alongside work towards the Laboratory's initial objective - the LHC high energy proton-proton collider in the LEP tunnel

Britain at CERN

CERN Multimedia

2000-01-01

H. E. Mr Christopher Hulse, Ambassador of United Kingdom in Switzerland, CERN Director General Luciano Maiani, Sir David Wright, Chief Executive of British Trade International and Roger Cashmore, CERN Director of research visit the Britain at CERN exhibition. From 14 to 17 November 30 British companies exhibited leading edge technologies at CERN. This is Britain's 18th exhibition at CERN since 1968. Out of the 30 companies, which attended the Britain at CERN exhibition in 1998, 25 have received an order or a contract relating to CERN during the last two years. The exhibition was inaugurated on Tuesday by Sir David Wright, Chief Executive of British Trade International. He was accompanied by H.E. Mr Christopher Hulse CMG, OBE, Her Majesty's Ambassador to Switzerland, and Mr. David Roberts, Deputy Head of Mission and Director of Trade Promotion at the British Embassy in Bern. CERN Director-General, Professor Luciano Maiani, underlined the major contribution of British physicists to CERN, pointing out the fact ...

FFAG ACCELERATOR AS A NEW INJECTOR FOR THE BNL-AGS.

Energy Technology Data Exchange (ETDEWEB)

RUGGIERO, A.G.

2004-10-13

It has been proposed recently to upgrade the Alternating-Gradient Synchrotron (AGS) of Brookhaven National Laboratory (BNL) to an average proton beam power of one MWatt at the top energy of 28 GeV. This is to be accomplished primarily by raising the AGS repetition rate from the present {approx} 1/3 to 2.5 pulses per second, and by a relatively modest increase of beam intensity from the present 0.7 to about 1.0 x 10{sup 14} protons per cycle. The present injector, the 1.5 GeV Booster, has a circumference a quarter of that of the AGS, and four successive beam pulses are required for a complete fill of the AGS. The filling time at injection is thus at least 0.5 seconds, and it ought to be eliminated if one desires to shorten the AGS cycle period. Moreover, holding the beam for such a long period of time during injection causes its quality to deteriorate and beam losses. This report is the summary of the results of a feasibility study of a 1.5 GeV Fixed-Field Alternating-Gradient (FFAG) Accelerator as a new possible injection to the AGS.

submitter Radiation Protection Studies for CERN LINAC4/SPL Accelerator Complex

CERN Document Server

Mauro, Egidio; Silari, Marco

2009-01-01

CERN is presently designing a new chain of accelerators to replace the present Proton Synchrotron (PS) complex: a 160 MeV room-temperature H$^-$ linac (Linac4) to replace the present 50 MeV proton linac injector, a 3.5 GeV Superconducting Proton Linac (SPL) to replace the 1.4 GeV PS booster (PSB) and a 50 GeV synchrotron (named PS2) to replace the 26 GeV PS. Linac4 has been funded and the civil engineering work started in October 2008, whilst the SPL is in an advanced stage of design. Beyond injecting into the future 50 GeV PS, the ultimate goal of the SPL is to generate a 4 MW beam for the production of intense neutrino beams. The radiation protection design is driven by the latter requirement. This thesis summarizes the radiation protection studies conducted for Linac4. FLUKA Monte Carlo simulations, complemented by analytical estimates, were performed 1) to evaluate the propagation of neutrons through the waveguide, ventilation and cable ducts placed along the accelerator, 2) to estimate the radiological i...

People and things. CERN Courier, Jan-Feb 1989, v.29(1)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1989-01-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. Jointly sponsored by Tel Aviv University and the Weizmann Institute of Science, the 9th International Conference 'Physics in Collision ' will take place in the Kibbutz Ma'ale Hahamisha on the outskirts of Jerusalem from June 19-22. A Users' Meeting of the European Synchrotron Radiation Facility (ESRF) will be held in Grenoble from 20-23 March. An Eloisatron Project Research Workshop 'Higgs Particle(s) - Physics Issues and Search Strategies in High Energy Collisions ' will be held at the Ettore Majorana Centre, Erice, Sicily, from 15-26 July. On November 17 a beam of carbon-12 6+ ions at an energy of 73 MeV was successfully electron cooled at the Test Storage Ring TSR of the Max Planck Institut fur Kernphysik in Heidelberg. On 13 November 1988 Erhard Fischer died from cancer. After joining CERN in 1958 he began basic R and D on ultrahigh vacuum problems for the proposed CESAR storage ring's.

30 CERN

Energy Technology Data Exchange (ETDEWEB)

Anon.

1984-11-15

September marked the 30th Anniversary of the coming into force of the Convention establishing the European Organization for Nuclear Research (CERN). A formal ceremony, attended by the King of Spain, was the highlight of the celebrations. Throughout the month, an exhibition of many of the important documents from CERN's early history (including the original Convention, kindly loaned by UNESCO, with the signatures of representatives of the twelve founding States) was presented at CERN. A concert by the Geneva Orchestre de la Suisse Romande was given in CERN's honour. An Open Day at the Laboratory drew thousands of visitors. A full day's 'history seminar' enabled a team presently working on CERN history to consult with many of the pioneers.

Synchrotron light

International Nuclear Information System (INIS)

2001-01-01

'Synchrotron Light' is an interactive and detailed introduction to the physics and technology of the generation of coherent radiation from accelerators as well as to its widespread high-tech applications in science, medicine and engineering. The topics covered are the interaction of light and matter, the technology of synchrotron light sources, spectroscopy, imaging, scattering and diffraction of X-rays, and applications to materials science, biology, biochemistry, medicine, chemistry, food and pharmaceutical technology. All synchrotron light facilities are introduced with their home-page addresses. 'Synchrotron Light' provides an instructive and comprehensive multimedia learning tool for students, experienced practitioners and novices wishing to apply synchrotron radiation in their future work. Its multiple-entry points permit an easy exploration of the CD-Rom according to the users knowledge and interest. 2-D and 3-D animations and virtual reconstruction with computer-generated images guide visitors into the scientific and technical world of a synchrotron and into the applications of synchrotron radiation. This bilingual (English and French) CD-Rom can be used for self-teaching and in courses at various levels in physics, chemistry, engineering, and biology. (author)

People and things. CERN Courier, September 1980, v. 20(6)

International Nuclear Information System (INIS)

Anon.

1980-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: ; At the 66th Session of the CERN Council on 27 June the project to construct a large electron-positron storage ring, known as LEP, as Europe's next major facility for high energy physics research was formally presented for the first time; A meeting, organized jointly by DESY and the Max-Planck Institute in Munich, will be held in Munich on 24-25 October for those interested in the construction and later use of the proposed HERA electron-proton colliding ring; On 19 June papers were signed at Fermilab extending the collaboration in high energy physics between the USA and China which first took formal form early in 1979; At the end of May, a second International Symposium on the History of Particle Physics was held at Fermilab; The Government of the Canadian province of Alberta has given interim funding for the conceptual design of an accelerator complex which will consist primarily of a heavy ion synchrotron giving ions up to A = 40 and 600 MeV/amu. The project has the acronym 'MARIA' — Medical Accelerator Research Institute, Alberta; On 16, 17 June a Cryogenic Workshop was held at Fermilab to focus on helium refrigeration systems for superconducting high energy accelerators. ; A few years ago, when the 5 GeV electron synchrotron NINA at the Daresbury Laboratory was in its final years of operation, the magnets of NINA seemed to be built into every new accelerator proposal then emerging in Europe. Now, with the machine closed down, the magnets remain available and Daresbury would like to see them in action again if anyone could make good use of them

Bienvenue au CERN !

CERN Multimedia

CERN Press Office. Geneva

1998-01-01

CERN, the Laboratory which invented the World-Wide Web has re-invented its public Web site. The new face of CERN has gone live at http://www.cern.ch/ Public . CERN's new Web pages have been designed to give visitors an informative introduction to the fascinating world of particle physics. For those whose whirl around the Web only allows a short stop, there's the 'CERN in two minutes' page.

CERN Rocks

CERN Multimedia

2004-01-01

The 15th CERN Hardronic Festival took place on 17 July on the terrace of Rest 3 (Prévessin). Over 1000 people, from CERN and other International Organizations, came to enjoy the warm summer night, and to watch the best of the World's High Energy music. Jazz, rock, pop, country, metal, blues, funk and punk blasted out from 9 bands from the CERN Musiclub and Jazz club, alternating on two stages in a non-stop show.  The night reached its hottest point when The Canettes Blues Band got everybody dancing to sixties R&B tunes (pictured). Meanwhile, the bars and food vans were working at full capacity, under the expert management of the CERN Softball club, who were at the same time running a Softball tournament in the adjacent "Higgs Field". The Hardronic Festival is the main yearly CERN music event, and it is organized with the support of the Staff Association and the CERN Administration.

Synchrotron-radiation research

International Nuclear Information System (INIS)

Cunningham, J.E.

1982-01-01

The use of radiation from synchrotron sources has started a renaissance in materials, physics, chemistry, and biology. Synchrotron radiation has advantages over conventional x rays in that its source brightness is a thousand times greater throughout a continuous energy spectrum, and resonances are produced with specific electron energy levels. Two major synchrotron radiation sources are operated by DOE: the Stanford Synchrotron Radiation Laboratory at SLAC, and the National Synchrotron Light Source at Brookhaven

CERN Choir

CERN Multimedia

Staff Association

2015-01-01

  Do you like singing? The CERN Choir is looking for basses and tenors Join us! Programme Spring Session 2015: Donizetti: Misere & Missa di Gloria e Credo Bellini: Salve Regina Bruckner: Requiem in D minor Next concert: Sunday 31 May 2015 at 17:00 Musicales de Comesières (GE) Rehearsals at CERN Main Auditorium, building 500 On Wednesdays from 20.00 to 22:00 Membership fee: January to June 150 CHF September to December: 100CHF Contact: Baudouin.bleus@cern.ch Facebook/Choeur-du-CERN

30 CERN

International Nuclear Information System (INIS)

Anon.

1984-01-01

September marked the 30th Anniversary of the coming into force of the Convention establishing the European Organization for Nuclear Research (CERN). A formal ceremony, attended by the King of Spain, was the highlight of the celebrations. Throughout the month, an exhibition of many of the important documents from CERN's early history (including the original Convention, kindly loaned by UNESCO, with the signatures of representatives of the twelve founding States) was presented at CERN. A concert by the Geneva Orchestre de la Suisse Romande was given in CERN's honour. An Open Day at the Laboratory drew thousands of visitors. A full day's 'history seminar' enabled a team presently working on CERN history to consult with many of the pioneers

Spectrum Analyzer Application for the Proton Synchrotron Wall Current Monitors

CERN Document Server

Limpens, Rik

The Proton Synchrotron (PS) is a key component in CERN's accelerator complex, where it usually accelerates either protons or heavy ions. The new acquisition system for the PS ring wall current monitors has been installed to be able to perform higher frequency measurements of a beam bunch. This is an important improvement, since the oscillating signals are related to losses of a beam bunch. The main goal of this project is to develop a LabVIEW application running on a Real-Time target to perform continuous and triggered spectral acquisition of a PS beam bunch and to provide a data visualization and analysis tool for the operators and users of the machine.

CAS CERN Accelerator School superconductivity in particle accelerators

International Nuclear Information System (INIS)

Turner, S.

1989-01-01

One of the objectives of the CERN Accelerator School is to run courses on specialised topics in the particle accelerator field. The present volume contains the proceedings of one such course, this time organized in conjunction with the Deutsches Elektronen Synchrotron (DESY) on the subject of superconductivity in particle accelerators. This course reflects the very considerable progress made over the last few years in the use of the technology for the magnet and radio-frequency systems of many large and small accelerators already in use or nearing completion, while also taking account of the development work now going on for future machines. The lectures cover the theory of superconductivity, cryogenics and accelerator magnets and cavities, while the seminars include superfluidity, superconductors, special magnets and the prospects for high-temperature superconductors. (orig.)

People and things. CERN Courier, Dec 1979, v. 19(9)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1979-12-15

The article reports on various accomplishments of CERN staff members and gives recent news updates: a Users Support Center has been established by the Accelerator Research Facilities Division of Argonne National Laboratory. Its purpose is to continue to make available expertise and facilities which have been developed at Argonne during the lifetime of the Zero Gradient Synchrotron (ZGS) to high energy physics users (particularly University user groups) who do not normally have access to them. The Universities Research Association, which operates Fermi National Accelerator Laboratory, is preparing a proposal in collaboration with astronomers to locate a Space Telescope Science Institute at Fermilab. The article also includes advertisements on molecule reactors, mass spectrometers, generators, motors, amplifiers etc.

People and things. CERN Courier, Dec 1979, v. 19(9)

International Nuclear Information System (INIS)

Anon.

1979-01-01

The article reports on various accomplishments of CERN staff members and gives recent news updates: a Users Support Center has been established by the Accelerator Research Facilities Division of Argonne National Laboratory. Its purpose is to continue to make available expertise and facilities which have been developed at Argonne during the lifetime of the Zero Gradient Synchrotron (ZGS) to high energy physics users (particularly University user groups) who do not normally have access to them. The Universities Research Association, which operates Fermi National Accelerator Laboratory, is preparing a proposal in collaboration with astronomers to locate a Space Telescope Science Institute at Fermilab. The article also includes advertisements on molecule reactors, mass spectrometers, generators, motors, amplifiers etc

BROOKHAVEN: AGS improvements

International Nuclear Information System (INIS)

Bleser, Ed

1994-01-01

The new Booster - AGS Alternating Gradient Synchrotron complex is providing beam while machine development to enhance performance also progresses, so far on schedule. In 1991 the Booster turned on and performed as requested - attesting to a successful construction and quality control programme. In 1992 beam was provided to users while the Booster met most of its operational goals - falling slightly short of its proton intensity goal of 0.5 x 10 13 protons per pulse (ppp). This would have been inconsequential except that the Booster intensity seemed to be hitting a fairly solid brick wall of undetermined origin. Since the goal for 1993 called for a doubling of the intensity, the situation seemed serious enough to schedule three months (February - April 1993) for Booster development

Structure of Ag, Fe and Ge microclusters

International Nuclear Information System (INIS)

Montano, P.A.; Shenoy, G.K.; Schulze, W.

1989-01-01

The structures of Ag, Fe and Ge microclusters were determined using EXAFS. The measurements were performed over a wide range of clusters sizes. The clusters were prepared using the gas aggregation technique and isolated in solid argon at 4.2 K. The measurements were performed at the National Synchrotron Light Source (NSLS) at beam line X-18B. A strong contraction of the interatomic distances was observed for Ag dimers and multimers. Silver clusters larger than 12 A mean diameter show a small contraction of the nn distance and a structure consistent with an fcc lattice. By contrast clusters smaller than 12 A show the presence of a small expansion and a strong reduction or absence of nnn in the EXAFS signal. This points towards a different crystallographic structure for Ag microclusters with diameter less than 12 A. In iron clusters we observe a gradual reduction of the nn distance as the cluster size decreases. The interatomic distance for iron dimers was determined to be 1.94 A, in good agreement with earlier measurements. The iron microclusters show a bcc structure down to a mean diameter of 9 A. Iron clusters with 9 A mean diameter show a structure inconsistent with a bcc lattice. The new structure is consistent with an fcc or hcp lattice. The measurements on Ge clusters show the presence of only nearest neighbors. There was clear evidence of temporal annealing as determined by variations in the near edge structure of the K-absorption edge. Absorption edge measurements were also performed for free Ge clusters travelling perpendicular to the direction of the synchrotron radiation beam. The measurements performed on the free clusters were consistent with those obtained for matrix isolated clusters. (orig.)

People and things. CERN Courier, Dec 1995, v. 35(9)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1995-12-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: José Mariano Gago, president of LIP, the national Laboratory for experimental high energy physics and related research and development projects, in Lisbon becomes Portuguese Minister of Science and Technology. As well as being a prominent Portuguese particle physicist, Professor Gago is well known at CERN and played a vital role in his country's becoming a CERN Member State from 1986. (For a report on CERN-Portugal affairs, see September, page 22.) CERN Research Director from 1989- 93, Walter Hoogland left CERN in October to return to the Dutch NIKHEF Laboratory. Director General Chris Llewellyn Smith recalled Walter Hoogland's valuable contributions in strengthening ties between CERN and non-Member States anxious to participate in CERA/'S experimental programme, and in the establishment of the Detector Research and Development Committee which blazed a trail for work towards LHC detectors. Brian Foster of Bristol has been invited to serve for the period from 1 September to 31 December 1995 as a member and for the period 1 January to 31 August 1998 as Chairman of the UK Particle Physics and Astronomy Research Council's Particle Physics Committee, succeeding David Saxon.; Aldo Michelini retires: Following a successful and wide ranging career at the forefront of particle physics, Aldo Michelini formally retired from CERN at the end of October. He joined CERN in 1960, following a series of experiments with tracking chambers, including some time with Jack Steinberger's group in Columbia. At CERN, he first worked on the CERN Wilson chamber, which now performs valuable service as an aquarium! Four years later, he led a CERN/ETH Zurich/IC London collaboration studying strong interactions using a then novel approach - spark chambers in a large magnet. From 1969 - 73, he led the Omega spectrometer

People and things. CERN Courier, Dec 1995, v. 35(9)

International Nuclear Information System (INIS)

Anon.

1995-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events: José Mariano Gago, president of LIP, the national Laboratory for experimental high energy physics and related research and development projects, in Lisbon becomes Portuguese Minister of Science and Technology. As well as being a prominent Portuguese particle physicist, Professor Gago is well known at CERN and played a vital role in his country's becoming a CERN Member State from 1986. (For a report on CERN-Portugal affairs, see September, page 22.) CERN Research Director from 1989- 93, Walter Hoogland left CERN in October to return to the Dutch NIKHEF Laboratory. Director General Chris Llewellyn Smith recalled Walter Hoogland's valuable contributions in strengthening ties between CERN and non-Member States anxious to participate in CERA/'S experimental programme, and in the establishment of the Detector Research and Development Committee which blazed a trail for work towards LHC detectors. Brian Foster of Bristol has been invited to serve for the period from 1 September to 31 December 1995 as a member and for the period 1 January to 31 August 1998 as Chairman of the UK Particle Physics and Astronomy Research Council's Particle Physics Committee, succeeding David Saxon.; Aldo Michelini retires: Following a successful and wide ranging career at the forefront of particle physics, Aldo Michelini formally retired from CERN at the end of October. He joined CERN in 1960, following a series of experiments with tracking chambers, including some time with Jack Steinberger's group in Columbia. At CERN, he first worked on the CERN Wilson chamber, which now performs valuable service as an aquarium! Four years later, he led a CERN/ETH Zurich/IC London collaboration studying strong interactions using a then novel approach - spark chambers in a large magnet. From 1969 - 73, he

People and things. CERN Courier, Apr 1988, v. 28(3)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1988-04-15

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The 5th Workshop on Nonlinear Evolution Equations and Dynamical Systems (NEEDS '89) will be held in Kolymbari, near Chania, Crete, from 2-19 July 1989. This year's DESY Theory Workshop ('Flavor Physics') will be held in Hamburg from 28-30 September. In conjunction with Daresbury Laboratory, the CERN Accelerator School is organizing a course on synchrotron radiation and free electron lasers in Chester, UK, from 6-12 April 1989. The topic for this year's SLAC Summer Institute is 'Probing the Weak Interaction: CP Violation and Rare Decays', The dates of the Institute are July 18th - 29th, 1988. The 1988 Summer Study on High Energy Physics in the 1990s will be held in Snowmass, Colorado, from 27 June to 15 July. The aim is to examine and evaluate the opportunities for high energy physics in the 1990s, including the possibilities with existing facilities, the proposed US Superconducting Super Collider (SSC), new accelerator technology, nonaccelerator experiments, special purpose facilities, and innovations in instrumentation and detector technology.

Development and Optimisation of the SPS and LHC beam diagnostics based on Synchrotron Radiation monitors

CERN Document Server

AUTHOR|(CDS)2081364; Roncarolo, Federico

Measuring the beam transverse emittance is fundamental in every accelerator, in particular for colliders, where its precise determination is essential to maximize the luminosity and thus the performance of the colliding beams.
 Synchrotron Radiation (SR) is a versatile tool for non-destructive beam diagnostics, since its characteristics are closely related to those of the source beam. At CERN, being the only available diagnostics at high beam intensity and energy, SR monitors are exploited as the proton beam size monitor of the two higher energy machines, the Super Proton Synchrotron (SPS) and the Large Hadron Collider (LHC). The thesis work documented in this report focused on the design, development, characterization and optimization of these beam size monitors. Such studies were based on a comprehensive set of theoretical calculations, numerical simulations and experiments. A powerful simulation tool has been developed combining conventional softwares for SR simulation and optics design, thus allowing t...

Joint US-CERN-Russia-Japan School

CERN Multimedia

CAS

2011-01-01

The Joint US-CERN-Russia-Japan School recently organised a course on Synchrotron Radiation & Free Electron Lasers, held at the Ettore Majorana Foundation and Centre for Scientific Culture in Erice, Italy from 6 to 15 April, 2011.   The school attracted 65 participants representing 22 different nationalities, with around half from Europe and the other half from Russia, Asia and the Americas. The programme comprised 15 lectures each of 90 minutes, 9 hours of parallel sessions, and 6 hours of discussion/student presentation sessions. Feedback from the participants was extremely positive, praising the expertise and enthusiasm of the lecturers, as well as the high standard and quality of their lectures. In addition to the academic programme, the students had the opportunity during the traditional one-day excursion to visit two archeological sites at the Temples of Segesta and Selinunte. The success of the school has encouraged the organisers to re-launch the Joint School, which ran on a roughly t...

Beam-loss induced pressure rise of Large Hadron Collider collimator materials irradiated with 158  GeV/u In^{49+} ions at the CERN Super Proton Synchrotron

Directory of Open Access Journals (Sweden)

E. Mahner

2004-10-01

Full Text Available During heavy ion operation, large pressure rises, up to a few orders of magnitude, were observed at CERN, GSI, and BNL. The dynamic pressure rises were triggered by lost beam ions that impacted onto the vacuum chamber walls and desorbed about 10^{4} to 10^{7} molecules per ion. The deterioration of the dynamic vacuum conditions can enhance charge-exchange beam losses and can lead to beam instabilities or even to beam abortion triggered by vacuum interlocks. Consequently, a dedicated measurement of heavy-ion induced molecular desorption in the GeV/u energy range is important for Large Hadron Collider (LHC ion operation. In 2003, a desorption experiment was installed at the Super Proton Synchrotron to measure the beam-loss induced pressure rise of potential LHC collimator materials. Samples of bare graphite, sputter coated (Cu, TiZrV graphite, and 316 LN (low carbon with nitrogen stainless steel were irradiated under grazing angle with 158  GeV/u indium ions. After a description of the new experimental setup, the results of the pressure rise measurements are presented, and the derived desorption yields are compared with data from other experiments.

Characterization of the Metrology beamline at the SOLEIL synchrotron and application to the determination of mass attenuation coefficients of Ag and Sn in the range 3.5 ≤ E ≤ 28 keV

International Nuclear Information System (INIS)

Menesguen, Y.; Lepy, M.C.

2011-01-01

This work presents the new Metrology beamline at the SOLEIL synchrotron facility and a first attempt to quantitative measurements of mass attenuation coefficients for Ag and Sn performed on the hard X-ray branch. We first describe the beamline itself and the characterization performed of the unfocused monochromatic beam running mode. We performed a first experimental measurement of mass attenuation coefficients in the range 3.5 ≤ E ≤ 28 keV and we also derived the K-absorption and L-absorption jump ratios. The results are compared with theoretical values as well as with other experimental data and agree well with previous published values. (authors)

Construction and early commissioning results of the AGS Booster

International Nuclear Information System (INIS)

Weng, W.T.; Ahrens, L.; Damm, R.; McNerney, A.J.

1991-01-01

The AGS Booster synchrotron has been designed to accelerate protons from 200 MeV to 1.5 GeV and heavy ions from several MeV per nucleon to several hundred MeV per nucleon for all the nuclei up to gold. The design requirements and measurements results of major accelerator components and systems are presented. The early commissioning results of the injection is also presented. 12 refs., 9 figs., 2 tabs

Collide@CERN Geneva

CERN Multimedia

CERN. Geneva; Kieffer, Robert; Blas Temino, Diego; Bertolucci, Sergio; Mr. Decelière, Rudy; Mr. Hänni, Vincent

2014-01-01

CERN, the Republic and Canton of Geneva, and the City of Geneva are delighted to invite you to “Collide@CERN Geneva Music”. Come to the public lecture about collisions between music and particle physics by the third winners of Collide@CERN Geneva, Vincent Hänni & Rudy Decelière, and their scientific inspiration partners, Diego Blas and Robert Kieffer. The event marks the beginning of their residency at CERN, and will be held at the CERN Globe of Science and Innovation on 16 October 2014 at 19.00. Doors will open at 18.30.

CERN Photo club

CERN Multimedia

CERN Photo club

2016-01-01

The CERN Photo Club organizes in collaboration with Canon Switzerland a photo contest open to all members of the CERN (Persons with a CERN access card). The only restriction is that the photos must have been taken with a CANON camera (DSLR, bridge or compact) between 1 and 31 October 2016. Send your three best pictures at  Photo.Contest@cern.ch with a short description explaining the images. Further information on the Photo club website: http://photoclub.web.cern.ch/content/photo-contest-october-2016

CERN Cricket Club

CERN Multimedia

CERN Cricket Club

2010-01-01

CERN Cricket Club Match Reports The cricket season is well under way, despite the weather, and several matches have been played. The match reporters have, however, found it too difficult to limit their reports to ¼ of a page, hence the reports have not appeared in the bulletin. All reports can be found at http://cern.ch/Club-Cricket/reports/reports.html The list of forthcoming matches can be consulted at http://cern.ch/Club-Cricket/fixtures.html Further information about the CERN Cricket Club can be found at http://cern.ch/Club-Cricket/

Design optimization of 600 A-13 kA current leads for the Large Hadron Collider project at CERN

CERN Document Server

Spiller, D M; Al-Mosawl, M K; Friend, C M; Thacker, P; Ballarino, A

2001-01-01

The requirements of the Large Hadron Collider project at CERN for high-temperature superconducting (HTS) current leads have been widely publicized. CERN require hybrid current leads of resistive and HTS materials with current ratings of 600 A, 6 kA and 13 kA. BICC General Superconductors, in collaboration with the University of Southampton, have developed and manufactured prototype current leads for the Large Hadron Collider project. The resistive section consists of a phosphorus de-oxidized copper conductor and heat exchanger and the HTS section is constructed from BICC General's (Pb, Bi)2223 tapes with a reduced thermal conductivity Ag alloy sheath. We present the results of the materials optimization studies for the resistive and the HTS sections. Some results of the acceptance tests at CERN are discussed. (9 refs).

CERN Cricket Club

CERN Document Server

CERN Cricket Club

2018-01-01

The CERN Cricket Club 2018 season begins soon, the first net practice is scheduled (weather permitting) for Thursday April 12th, at 18.00!  The club is always looking for new players and newcomers will be made very welcome. Anyone who is interested in joining the club should sign up on our web site: http://cern.ch/cricket/ or turn up for net practice, which takes place each Thursday evening (apart from CERN official holidays) until the end of September (starting at 18:00 to around 20:00) at the CERN Prévessin site: http://cern.ch/cricket/CERN-Ground.html The first matches will be in the Geneva T20 competition on Saturday and Sunday, April 14th / 15th. 

Surface morphology and electronic structure of Ni/Ag(100)

International Nuclear Information System (INIS)

Hite, D. A.; Kizilkaya, O.; Sprunger, P. T.; Howard, M. M.; Ventrice, C. A. Jr.; Geisler, H.; Zehner, D. M.

2000-01-01

The growth morphology and electronic structure of Ni on Ag(100) has been studied with scanning tunneling microscopy (STM) and synchrotron based angle resolved photoemission spectroscopy. At deposition temperatures at or below 300 K, STM reveals Ni cluster growth on the surface along with some subsurface growth. Upon annealing to 420 K, virtually all Ni segregates into the subsurface region forming embedded nanoclusters. The electronic structure of Ni d bands in the unannealed surface shows dispersion only perpendicular to the surface whereas the annealed surface has Ni d bands that exhibit a three-dimensional-like structure. This is a result of the increased Ni d-Ag sp hybridization bonding and increased coordination of the embedded Ni nanoclusters. (c) 2000 American Vacuum Society

Synchrotron radiation

CERN Document Server

Kunz, C

1974-01-01

The production of synchrotron radiation as a by-product of circular high-energy electron (positron) accelerators or storage rings is briefly discussed. A listing of existing or planned synchrotron radiation laboratories is included. The following properties are discussed: spectrum, collimation, polarization, and intensity; a short comparison with other sources (lasers and X-ray tubes) is also given. The remainder of the paper describes the experimental installations at the Deutsches Elektronen-Synchrotron (DESY) and DORIS storage rings, presents a few typical examples out of the fields of atomic, molecular, and solid-state spectroscopy, and finishes with an outlook on the use of synchrotron radiation in molecular biology. (21 refs).

CERN honours Georges Charpak

CERN Multimedia

2009-01-01

CERN pays tribute to the work of Georges Charpak at a colloquium in honour of his 85th birthday. var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-0753-kbps-480x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-Multirate-200-to-753-kbps-480x360.wmv', 'false', 480, 360, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-posterframe-480x360-at-10-percent.jpg', '1167500', true, 'Video/Public/Movies/2009/CERN-MOVIE-2009-008/CERN-MOVIE-2009-008-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4'); Watch the video conference of Georges Charpak.   On 9 March CERN’s Main Auditorium was the venue for a fascinating and moving celebration marking the 85th birthday of Georges Charpak, who was awarded the Nobel Prize for Physics in 1992 for his inven...

CERN Video News

CERN Document Server

2003-01-01

From Monday you can see on the web the new edition of CERN's Video News. Thanks to a collaboration between the audiovisual teams at CERN and Fermilab, you can see a report made by the American laboratory. The clip concerns the LHC magnets that are being constructed at Fermilab. Also in the programme: the spectacular rotation of one of the ATLAS coils, the arrival at CERN of the first American magnet made at Brookhaven, the story of the discovery 20 years ago of the W and Z bosons at CERN. http://www.cern.ch/video or Bulletin web page.

Britain at CERN

CERN Multimedia

CERN Press Office. Geneva

1996-01-01

On 8 October, H.E. Mr David Beattie, British Ambassador to Switzerland, Mr John R. Nichols, H.M. Consul-General in Geneva and, Prof. Christopher Llewellyn Smith, CERN*'s Director General, formally opened the industrial exhibition of thirty-three British hi-tech companies at CERN, which takes place from 8 to 11 October, 1996. The exhibition offers British companies the opportunity to display their products in fields that are of immediate importance to the scientists, engineers and technicians working at CERN, and also to scientists from non-Member States who take part in research projects at CERN.

Young Artists@ CERN

CERN Multimedia

2004-01-01

In view of 50th anniversary of CERN, about 20 young artists will be visiting CERN from 26 to 31 January to learn about the laboratory's research and the mysterious world of particle physics. The impressions they take home will be the main inspiration for the artwork they will then produce for an exhibition to be inaugurated in October 2004 as part of CERN's 50th anniversary celebration. We are looking for scientists who are interested in the Art-Science synergy and who can volunteer to discuss their work at CERN to these young artists during this week (25-31/01). Please contact renilde.vanden.broeck@cern.ch if you are interested. The project is called Young Artists@ CERN and for more information look at this website: http://www.hep.ucl.ac.uk/~andy/CERNart/

CERN Cricket club

CERN Multimedia

CERN Cricket club

2015-01-01

The CERN Cricket Club 2015 season begins soon, the first net practice is scheduled (weather permitting) for Thursday April 16th, at 18:00! The club is always looking for new players and newcomers will be made very welcome. Anyone who is interested in joining the club should sign up on our web site: http://cern.ch/Club-Cricket/ or turn up for net practice, which takes place each Thursday evening from April 16th (apart from CERN official holidays) until the end of September (starting at 18:00 to around 19:30) at the CERN Prévessin site: http://club-cricket.web.cern.ch/Club-Cricket/CERN-Ground.html The first match will be at home on Sunday, April 19th against Rhone CC from Lyon.

CERN Table Tennis Club

CERN Multimedia

CERN Table Tennis Club

2014-01-01

CERN Table Tennis Club Announcing CERN 60th Anniversary Table Tennis Tournament to take place at CERN, from July 1 to July 15, 2014   The CERN Table Tennis Club, reborn in 2008, is encouraging people at CERN to take more regular exercise. This is why the Club, thanks to the strong support of the CERN Staff Association, installed last season a first outdoor table on the terrace of restaurant # 1, and will install another one this season on the terrace of Restaurant # 2. Table tennis provides both physical exercise and friendly social interactions. The CERN Table Tennis club is happy to use the unique opportunity of the 60th CERN anniversary to promote table tennis at CERN, as it is a game that everybody can easily play, regardless of level. Table tennis is particularly well suited for CERN, as many great physicists play table tennis, as you might already know: “Heisenberg could not even bear to lose a game of table tennis”; “Otto Frisch played a lot of table tennis;...

Exploitation of the Saturne synchrotron during the forth quarter of 1961

International Nuclear Information System (INIS)

1962-01-01

This document reports data describing the availability and operation (maintenance, failures, operation, beam availability, repetition period), main incidents, experiments related to the machine itself (adjustment of the beam median plane, influence of pressure on the number of accelerated particles, influence of noise on the HF chain on the number of accelerated particles, oscillator test, phase servo-control, detection of the extracted beam), other studies (beam striker, ejection, target propulsion, field measurement), physics experiments (electronic experiments), measures and measurements regarding the protection against radiation, and the liquefier activity which occurred or took place during the exploitation of the Saturne synchrotron during the second three-month period of 1961. It also indicates external works performed in the CERN hydrogen bubble chamber

CERN Medtech:Hackathon

CERN Multimedia

Olofsson, Simon

2018-01-01

The CERN Medtech:Hackathon, organised by CERN Knowledge Transfer, was held in IdeaSquare during 6-9 April. Teams from all around the world gathered, by using CERN technology, to solve problems posed by the Medtech industry.

Violent collisions of spinning protons

Energy Technology Data Exchange (ETDEWEB)

Krisch, A.D. [Michigan Univ., Spin Physics Center, Ann Arbor, MI (United States)

2005-07-01

The author draws the history of polarized proton beams that has relied on experiments that took place in different accelerators like ZGS (zero gradient synchrotron, Argonne), AGS (Brookhaven) and Fermilab from 1973 till today. The first studies of the behavior and spin-manipulation of polarized protons helped in developing polarized beams around the world: Brookhaven now has 200 GeV polarized protons in the RHIC collider, perhaps someday the 7 TeV LHC at CERN might have polarized protons.

The present status of the n-TOF facility at CERN

International Nuclear Information System (INIS)

Igashira, Masayuki

2005-01-01

The main aim of the n - TOF facility at CERN is to provide precise neutron cross-section data relevant to the R and D of accelerator driven systems, nuclear astrophysics, etc. It is composed of a spallation neutron source, a 187.5-m flight path, a variety of detectors, a data acquisition system, etc. A 20 GeV proton synchrotron is employed together with a lead target for the spallation neutron source. The measurement of capture and fission cross sections started in 2002 and had been performed until the mid of November in 2004. The capture and fission measurements were performed for 28 and 7 isotopes, respectively. The brief history, present status, and future plan of the n - TOF facility are reported. (author)

CERN: From Russia with krypton

International Nuclear Information System (INIS)

Anon.

1995-01-01

Full text: Arecent arrival at CERN is a cryostat built under the auspices of thelnternational Science and Technology Center (ISTC), a programme funded by the European Union, Japan, Russia, and the US which aims to promote the integration of former Soviet Union scientists and industry into global research and development activities. The new cryostat, built by Moscowbased Krunichev Enterprises, better known for its involvement in the ''Proton'' space rocket and the ''Mir'' space station, will form a vital part of the NA48 experiment at the SPS synchrotron. NA48, a Cagliari/Cambridge/CERN/ Dubna/Edinburgh/Ferrara/Mainz/Orsay/Perugia/Pisa/Saclay/Siegen/ Turin/Vienna collaboration, aims to study the small asymmetry in the properties of matter and antimatter known as CP violation, and should be fully ready to collect data next year. Through its links with Dubna's Joint Institute of Nuclear Research (JINR), near Moscow, NA48 has launched a number of initiatives designed to involve Russian physicists and industry in the experiment. The bargain 22 tonnes of krypton for NA48's energy-measuring calorimeter were manufactured at a specially- built factory in Russia. INTAS, the European Union-backed scheme for the promotion of cooperation with former Soviet Union scientists, provides funds for Dubna physicists to visit Western Europe. INTAS will also provide computing and networking infrastructure allowing the Russian physicists to participate fully in NA48's programme. As well as the cryostat, NA48's collaborating institutes have placed other orders with Russian suppliers. INFN Pisa has ordered 14,000 electrical feed-though contacts from the Budker Institute in Novosibirsk, whilst Saclay has placed contracts elsewhere for vacuum and other equipment. The new cryostat forms part of a joint project of INFN Pisa and CERN, involving scientists from Dubna, Edinburgh, and Saclay. The Russian part was built by Krunichev

CERN in 2030

CERN Multimedia

Laëtitia Pedroso

2011-01-01

A competition will soon be launched to select the architect, urban planner or landscape designer to undertake the first phase of redevelopment of the parking area by the flagpoles, between Entrances A and B. This will be the first stage in a wider development project aimed at sprucing up the CERN site and enhancing its image. Work to create a pleasant and harmonious area at the CERN entrance will start in 2013 while preparatory work for other developments inside the CERN site has already begun…   CERN as it is today.  By 2030, CERN will be a greener place, much like a university campus. The arrival of the tramway on 30 April will be an opportunity to forge ahead with the urban plan aimed at rejuvenating the CERN site and redefining how it is organised. "Nearly sixty years after CERN's first buildings went up, this plan will help transform the site and give it a welcoming, friendly face, a bit like a university campus," explains Thierry Chanard, urban plannin...

Germany at CERN

CERN Multimedia

2005-01-01

From left to right: Maximilian Metzger, CERN's Secretary-General, Hermann Schunck, Director at the German Federal Ministry of Education and Research, and Robert Aymar, CERN's Director-General, talking to Wolfgang Holler from Butting, one of the companies at the "Germany at CERN" exhibition. Far right : Susanne-Corinna Langer-Greipl from BMBF, delegate to the CERN Finance Committee. For three days, CERN's Main Building was transformed into a showcase for German industry. Twenty-nine companies from sectors related to particle physics (electrical engineering, vacuum and low temperature technology, radiation protection, etc.) were here for the ninth "Germany at CERN" exhibition, organised by the German Federal Ministry of Education and Research (BMBF), which gave them the opportunity to meet scientists and administrators from the Laboratory. On 1 March the exhibition was visited by a German delegation headed by Dr Hermann Schunck, Director at BMBF.

A model of polarized-beam AGS in the ray-tracing code Zgoubi

Energy Technology Data Exchange (ETDEWEB)

Meot, F. [Brookhaven National Lab. (BNL), Upton, NY (United States); Ahrens, L. [Brookhaven National Lab. (BNL), Upton, NY (United States); Brown, K. [Brookhaven National Lab. (BNL), Upton, NY (United States); Dutheil, Y. [Brookhaven National Lab. (BNL), Upton, NY (United States); Glenn, J. [Brookhaven National Lab. (BNL), Upton, NY (United States); Huang, H. [Brookhaven National Lab. (BNL), Upton, NY (United States); Roser, T. [Brookhaven National Lab. (BNL), Upton, NY (United States); Shoefer, V. [Brookhaven National Lab. (BNL), Upton, NY (United States); Tsoupas, N. [Brookhaven National Lab. (BNL), Upton, NY (United States)

2016-07-12

A model of the Alternating Gradient Synchrotron, based on the AGS snapramps, has been developed in the stepwise ray-tracing code Zgoubi. It has been used over the past 5 years in a number of accelerator studies aimed at enhancing RHIC proton beam polarization. It is also used to study and optimize proton and Helion beam polarization in view of future RHIC and eRHIC programs. The AGS model in Zgoubi is operational on-line via three different applications, ’ZgoubiFromSnaprampCmd’, ’AgsZgoubiModel’ and ’AgsModelViewer’, with the latter two essentially interfaces to the former which is the actual model ’engine’. All three commands are available from the controls system application launcher in the AGS ’StartUp’ menu, or from eponymous commands on shell terminals. Main aspects of the model and of its operation are presented in this technical note, brief excerpts from various studies performed so far are given for illustration, means and methods entering in ZgoubiFromSnaprampCmd are developed further in appendix.

France at CERN

CERN Multimedia

CERN Bulletin

2010-01-01

Rolf Heuer, CERN Director General, visits the exhibition "La France au CERN". The exhibition France at CERN, organized by UBIFRANCE in collaboration with CERN's GS/SEM (Site Engineering and Management) service, took place from Monday 7 to Wednesday 9 June in the Main Building. The 36 French firms taking part came to present their products and technologies related to the Organization's activities. The next exhibition will be "Netherlands at CERN" in November.

People and things. CERN Courier, Jan-Feb 1989, v.29(1)

International Nuclear Information System (INIS)

Anon.

1989-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. Jointly sponsored by Tel Aviv University and the Weizmann Institute of Science, the 9th International Conference 'Physics in Collision ' will take place in the Kibbutz Ma'ale Hahamisha on the outskirts of Jerusalem from June 19-22. A Users' Meeting of the European Synchrotron Radiation Facility (ESRF) will be held in Grenoble from 20-23 March. An Eloisatron Project Research Workshop 'Higgs Particle(s) - Physics Issues and Search Strategies in High Energy Collisions ' will be held at the Ettore Majorana Centre, Erice, Sicily, from 15-26 July. On November 17 a beam of carbon-12 6+ ions at an energy of 73 MeV was successfully electron cooled at the Test Storage Ring TSR of the Max Planck Institut fur Kernphysik in Heidelberg. On 13 November 1988 Erhard Fischer died from cancer. After joining CERN in 1958 he began basic R and D on ultrahigh vacuum problems for the proposed CESAR storage ring's

Multiturn Extraction Based on Trapping in Stable Islands at CERN PS: Recent Measurement Advances

CERN Multimedia

Cappi, R; Giovannozzi, Massimo; Martini, M; Métral, Elias; Müller, A S; Sakumi, A; Steerenberg, R

2004-01-01

Recently a novel approach to perform multi-turn extraction was proposed based on beam splitting in the transverse phase space by means of trapping inside stable islands. During the year 2002, preliminary measurements at the CERN Proton Synchrotron with a low-intensity, singlebunch, proton beam, confirmed the possibility of generating various beamlets starting from a single Gaussian beam. The experimental campaign continued also during the year 2003 to assess a number of key issues, such as the feasibility of trapping with high-intensity beam and capture efficiency. The experimental results are presented and discussed in detail in this paper.

CERN Shop Christmas Sale

CERN Multimedia

Visits & Exhibition Service/ETT-VE

2001-01-01

11-13.12.2001 Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 11 to Thursday 13 December from 10.30 to 16.00. CERN Calendar 10.- CERN Sweat-shirts(M, L, XL) 30.- CERN T-shirt (M, L, XL) 20.- New CERN silk tie (2 colours) 35.- Fancy silk tie (blue, bordeau) 25.- Silk scarf (light blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- CERN watch 25.- CERN baseball cap 15.- CERN briefcase 15.- Book 'Antimatter' (English) 35.- Book 'How the web was born' (English) 25.- The Search for Infinity (French, Italian, English, German) 40.-   If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs.

Synchrotron light beam and a synchrotron light experiment facility

International Nuclear Information System (INIS)

Ando, Masami

1980-01-01

In the National Laboratory for High Energy Physics, about two years ago, the requirements of synchrotron light beam in respective measuring instruments were discussed. Then, also the arrangement (lattice) of a storage ring, the nature of synchrotron light beam, a synchrotron light experiment facility and the arrangement of the beam lines were studied. During the period of two years since then, due to the changes in the circumstances, the design of the lattice was altered. Accordingly, the arrangement of the beam lines and of measuring instruments were largely changed. At this point, the results of discussions in various meetings are described, though they may still be subject to future changes, with due consideration to beam, environment and beam lines required for the design of the measuring instruments: (1) storage ring and synchrotron light beam, (2) requirements on small beam size and beam stability, (3) a synchrotron light experiment facility. (J.P.N.)

RUNNING THE AGS MMPS AT 5 HZ, 24 GEV

International Nuclear Information System (INIS)

MARNERIS, I.; ROSER, T.; RUGGIERO, A.G.; SANDBERG, J.

2001-01-01

The Brookhaven Alternating Gradient Synchrotron (AGS) is a strong focusing accelerator which is used to accelerate protons and various heavy ion species to an equivalent proton enera of 29 GeV. At this energy, the maximum intensity achieved is 7 x 10 13 protons per pulse. This corresponds to an average beam power of about 0.2 MW. Future programs in high-energy and neutron physics may require an upgrade of the AGS accelerator to an average beam power of around 4 MW, with proton beams at the energy of 24 GeV. This can be achieved with an increase of the beam intensity to 2 x 10 14 protons per pulse that requires a 1.5-GeV super-conducting linac [1], as a new injector and by upgrading the power supply system to allow cycling at 5 beam pulses per second. This paper describes the present mode of operation of the AGS main magnet power supply, the requirements for operation at 5 Hz and a proposed sorption of all modifications required to upgrade the AGS main magnet power supply to operate at 5 HZ, with proton beams at the energy of 24 GeV

CERN Photo Club (CPC) / Canon Contest - My View of CERN

CERN Multimedia

Steyaert, Didier

2016-01-01

The CERN Photo Club has organized in collaboration with Canon Switzerland a photo contest open to all members of the CERN (Persons with a CERN access card). The only restriction is that the photos must have been taken with a CANON camera (DSLR, bridge or compact) between 1 and 31 October 2016.

What's new@CERN, episode 2

CERN Multimedia

CERN Video productions

2011-01-01

On Monday 7 November at 4pm in English and 4.20pm in French, watch "What's new@CERN" on webcast.cern.ch. In this second episode: LHC performance, a journey to the particle source and this past month's news.   var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-0753-kbps-640x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-Multirate-200-to-753-kbps-640x360-25-fps.wmv', 'false', 480, 360, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-posterframe-640x360-at-30-percent.jpg', '1394250', true, 'Video/Public/Movies/2011/CERN-MOVIE-2011-164/CERN-MOVIE-2011-164-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4');

Beam Measurements of the Longitudinal impedance of the CERN Super Proton Synchrotron

CERN Document Server

AUTHOR|(CDS)2090034; Petrache, Costel

One of the main challenges of future physics projects based on particle accelerators is the need for high intensity beams. However, collective effects are a major limitation which can deteriorate the beam quality or limit the maximum intensity due to losses. The CERN SPS, which is the last injector for the LHC, is currently unable to deliver the beams required for future projects due to longitudinal instabilities. The numerous devices in the machine (accelerating RF cavities, injection and extraction magnets, vacuum flanges. etc.) lead to variations in the geometry and material of the chamber through which the beam is travelling. The electromagnetic interaction within the beam (space charge) and of the beam with its environment are described by a coupling impedance which affects the motion of the particles and leads to instabilities for high beam intensities. Consequently, the critical impedance sources should be identified and solutions assessed. To have a reliable impedance model of an accelerator, the...

Doing business with CERN

CERN Multimedia

2015-01-01

The Procurement Service, in collaboration with the Communications group’s Design team, has recently launched a new information campaign targeted at companies wishing to supply their products and services to CERN. This campaign comprises:   A brochure, available in hard and soft copy:  http://procurement.web.cern.ch/brochures/doing-business-with-cern.   A 6-minute video overview: https://procurement-dev.web.cern.ch/doing-business-with-cern. This campaign is intended for Member State firms with whom CERN is yet to do business. The key objectives are: To emphasise that CERN can be considered a major customer across a wide range of activities;   To present CERN’s procurement procedures in a dynamic and digestible way;   To highlight the information available on CERN’s procurement website: http://procurement.web.cern.ch. Furthermore, a new section called “Having a contract with CERN” is also now ava...

Synchrotron radiation in Australia

International Nuclear Information System (INIS)

Garrett, R.F.

2002-01-01

Full text: Synchrotron radiation research in Australia is entering a new era with the commencement of the Australian synchrotron project, which will construct a 3 GeV third generation synchrotron facility at Monash University in Victoria. To date Australian scientists have used overseas facilities, primarily those managed by the Australian Synchrotron Research Program in Japan and the USA. A fast developing and maturing Australian synchrotron user program has developed around these overseas facilities. The field of synchrotron radiation and its importance to a wide range of research will be introduced and Australia's current involvement and facilities will be described. The current status and technical specifications of the Australian synchrotron will be presented. Copyright (2002) Australian X-ray Analytical Association Inc

Synchrotron x-ray-diffraction study of the structure and growth of Xe films adsorbed on the Ag(111) surface

International Nuclear Information System (INIS)

Dai, P.; Wu, Z.; Angot, T.; Wang, S.; Taub, H.; Ehrlich, S.N.

1999-01-01

Synchrotron x-ray scattering has been used to investigate the structure and growth of perhaps the simplest of all films: xenon physisorbed on the Ag(111) surface. High-resolution x-ray scans of the in-plane structure and lower-resolution scans (specular and nonspecular) of the out-of-plane order were performed. The Xe films were prepared under both quasiequilibrium and kinetic growth conditions, and have fewer structural defects than those investigated previously by others on graphite substrates. Under quasiequilibrium conditions, the bulk Xe-Xe spacing is reached at monolayer completion, and the monolayer and bilayer lattice constants at coexistence are inferred equal to within 0.005 Angstrom, consistent with theoretical calculations. The Xe/vacuum interface profile for a complete monolayer and bilayer grown at quasiequilibrium is found to be sharper than for kinetically grown films. At coverages above two layers, diffraction scans along the Xe(01l) rod for quasiequilibrated films are consistent with the presence of two domains having predominantly an ABC stacking sequence and rotated 60 degree with respect to each other about the surface normal. Annealing of these films alters neither the population of the two domains nor the fraction of ABA stacking faults. The thickest film grown under quasiequilibrium conditions exceeds 220 Angstrom (resolution limited). Under kinetic growth conditions, x-ray intensity oscillations at the Xe anti-Bragg position of the specular rod are observed as a function of time, indicating nearly layer-by-layer growth. Up to four complete oscillations corresponding to a film of eight layers have been observed before the intensity is damped out; the number of oscillations is found to depend on the substrate temperature, the growth rate, and the quality of the Ag(111) substrate. The specular reflectivity from kinetically grown films at nominal coverages of three and four layers has been analyzed using a Gaussian model which gives a film

A tool for model based diagnostics of the AGS Booster

International Nuclear Information System (INIS)

Luccio, A.

1993-01-01

A model-based algorithmic tool was developed to search for lattice errors by a systematic analysis of orbit data in the AGS Booster synchrotron. The algorithm employs transfer matrices calculated with MAD between points in the ring. Iterative model fitting of the data allows one to find and eventually correct magnet displacements and angles or field errors. The tool, implemented on a HP-Apollo workstation system, has proved very general and of immediate physical interpretation

From the CERN web: knowledge transfer, sustainability, CERN openlab and more

CERN Multimedia

2015-01-01

This section highlights articles, blog posts and press releases published in the CERN web environment over the past weeks. This way, you won’t miss a thing...   Previous successful Knowledge Transfer enterprises have helped to develop several useful technologies, such as these photonic crystals, which glow when high-energy charged particles pass through, and are used for medical imaging. New Knowledge Transfer website to grow CERN’s industry links 23 November – by Harriet Jarlett  CERN’s Knowledge Transfer Group has just launched a new tool to encourage CERN researchers and businesses to share their technologies, ideas and expertise. It’s hoped that by facilitating these exchanges the tool will inspire new ways to apply CERN technologies commercially, to help benefit industry and society. Continue to read…    The power station at CERN's Prévessin site. (Image: Margot Frenot/CERN). CERN an...

THE Port: hackathon at CERN | Starts soon! | 31 October-2 November

CERN Multimedia

2014-01-01

Are you innovative and do you like to share your ideas with other enthusiasts? Would you like to apply your knowledge and skills to humanitarian problems? Are you motivated to work on issues beneficial to society?   THE Port problem-solving workshop - also known as a hackathon / makeathon - will take place at CERN from 31 October to 2 November. Interdisciplinary teams of 35 participants and 23 local mentors will work on topics inspired by members of other NGOs such as the ICRC, UN Development Programme, UNOSAT/UNITAR and Norwegian People's Aid. Out of 90 applicants who made it through to the 2nd selections round and were invited to a web CERN video interview, 5 interdisciplinary teams were formed who work on the following topics:     Our participants are from companies and universities such as: Oxford, MIT, NASA, Google, Ericsson, SAP SE - Innovation Center, EPFL, ZF Friedrichshhafen AG, Zurich Airport, Near Earth Autonomy, NBA, University of Bergen, TEDxLausann...

People and things. CERN Courier, Apr 1988, v. 28(3)

International Nuclear Information System (INIS)

Anon.

1988-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The 5th Workshop on Nonlinear Evolution Equations and Dynamical Systems (NEEDS '89) will be held in Kolymbari, near Chania, Crete, from 2-19 July 1989. This year's DESY Theory Workshop ('Flavor Physics') will be held in Hamburg from 28-30 September. In conjunction with Daresbury Laboratory, the CERN Accelerator School is organizing a course on synchrotron radiation and free electron lasers in Chester, UK, from 6-12 April 1989. The topic for this year's SLAC Summer Institute is 'Probing the Weak Interaction: CP Violation and Rare Decays', The dates of the Institute are July 18th - 29th, 1988. The 1988 Summer Study on High Energy Physics in the 1990s will be held in Snowmass, Colorado, from 27 June to 15 July. The aim is to examine and evaluate the opportunities for high energy physics in the 1990s, including the possibilities with existing facilities, the proposed US Superconducting Super Collider (SSC), new accelerator technology, nonaccelerator experiments, special purpose facilities, and innovations in instrumentation and detector technology

CERN, Geneva

CERN Multimedia

2007-01-01

"The Large Hadron Collider (pages 1-3) is being built at CERN, the European Centre for Nuclear Research near Geneva. CERN offers some extremely exciting opportunities to see "big bang" in action. (1 page)

The CERN's year; L'annee du CERN

Energy Technology Data Exchange (ETDEWEB)

Chadli, M. [Universite de Picardie Jules Verne, CREA, 80 - Amiens (France); Coppier, H. [Ecole Superieure d' Ingenieurs en Electrotechnique et Electronique d' Amiens - ESIEE Amiens, 80 - Amiens (France); Pezzeti, M. [Conseil Europeen pour la Recherche Nucleaire (CERN), Geneve (Switzerland)

2007-12-15

CERN, the European organization for nuclear research, has just celebrated its fifty years of existence. Its first goal was to counterbalance the migration of physics scientists towards the USA by the creation of a physics laboratory gathering scientists from the different European countries. Today, the CERN's mission has changed and has overcome all the expectations of its founders. In 2008, it will become, with the LHC (Large Hadron Collider), the biggest particle accelerator in the world. The CERN employs about 3000 physicists, engineers, technicians and workers. There is also 6500 people from 80 different countries who use the CERN's facilities during the year. The CERN is controlled by 20 European member states and 6 observer countries, and 20 non-member countries participate to the programs in progress. The CERN's power comes from its international and cosmopolitan spirit. The whole most famous physicists of the world can work together for the progress of science and for a better understanding of matter, of its interactions and of our universe. Two Nobel prices of physics come from the CERN: C. Rubbia and S. Van der Meer in 1983 for the discovery of W{sup +}, W{sup -} and Z{sub 0} bosons, and G. Charpak for the development of particle detectors. One can foresee that the LHC will allow new scientific achievements, like for instance, during experiments for the quest of the famous Higgs boson. It is important also to mention that the CERN has been at the origin of several technological innovations in all technical and engineering domains in the framework of its fundamental physics researches. (J.S.)

The AGS Booster vacuum systems

International Nuclear Information System (INIS)

Hseuh, H.C.

1989-01-01

The AGS Booster is a synchrotron for the acceleration of both protons and heavy ions. The design pressure of low 10 -11 mbar is required to minimize beam loss of the partially stripped heavy ions. To remove contaminants and to reduce outgassing, the vacuum chambers and the components located in them will be chemically cleaned, vacuum fired, baked then treated with nitric oxide. The vacuum sector will be insitu baked to a minimum of 200 degree C and pumped by the combination of sputter ion pumps and titanium sublimation pumps. This paper describes the design and the processing of this ultra high vacuum system, and the performance of some half-cell vacuum chambers. 9 refs., 7 figs

From the CERN web: Collide@CERN, Fermilab neutrinos and more

CERN Multimedia

2015-01-01

This new section highlights articles, blog posts and press releases published in the CERN web environment over the past weeks. This way, you won’t miss a thing...   Ruth Jarman and Joe Gerhardt. (Photo: Matthias H. Risse). Collide@CERN Ars Electronica Award goes to “Semiconductor” 10 August – Collide@CERN Ruth Jarman and Joe Gerhardt, two English artists collaborating under the name Semiconductor, are this year’s recipients of the Collide@CERN Ars Electronica Award. In the coming months, they will begin a two-month residency at CERN.  Continue to read…     Illustration: Fermilab/Sandbox Studio.   Fermilab experiment sees neutrinos change over 500 miles 7 August - Fermilab press release Scientists on the NOvA experiment saw their first evidence of oscillating neutrinos, confirming that the extraordinary detector built for the project not only functions as planned but is also making great p...

Extinction correction and synchrotron radiation

International Nuclear Information System (INIS)

Suortti, P.

1983-01-01

The primary extinction factor ysub(p) is defined as the ratio of the integrated reflection from a coherently diffracting domain to the integrated kinematical reflection from the same domain. When ysub(p) is larger than 0.5 it may be approximated by ysub(p)= exp[-(αdelta) 2 ], where α is about 0.5 and delta the average size of the coherent domain when measured in units of the extinction length Λ, delta = D/Λ. Transfer equations are applied to symmetrical Laue diffraction, and the reflectivity per unit length, sigma(epsilon) is solved from the measured reflecting ratio as a function of the rocking angle epsilon = theta -thetasub(B). Measurements with conventional x-ray sources are made on single crystal slabs of Be and Si using AgKβ, MoKα 1 and CuKα radiation. The primary extinction factor ysub(p)(epsilon) is solved from a point-by-point comparison of two measurements where the extinction length Λ is changed by varying the polarization and/or wavelength of the x-ray beam. The results show that primary and secondary extinction are strongly correlated, and that the customary assumption of independent size and orientation distributions of crystal mosaics is unjustified. The structure factors for Be and Si show close agreement with other recent measurements and calculations. The limitations of the method are discussed in length, particularly the effects of beam divergences and incoherence of the rays in the crystal. It is concluded that under typical experimental conditions the requirements of the theory are met. Practical limitations arising from the use of characteristic wavelengths and unpolarized radiation prohibit the use of the full potential of the method. The properties of a synchrotron radiation source are compared with a conventional x-ray source, and it is demonstrated that the experimental limitations can be removed by the use of synchrotron radiation. A diffraction experiment with synchrotron radiation is outlined, as well as generalization of the

Synchrotron radiation sources

Energy Technology Data Exchange (ETDEWEB)

van Steenbergen, A.

1979-01-01

As a result of the exponential growth of the utilization of synchrotron radiation for research in the domain of the material sciences, atomic and molecular physics, biology and technology, a major construction activity has been generated towards new dedicated electron storage rings, designed optimally for synchrotron radiation applications, also, expansion programs are underway at the existing facilities, such as DORIS, SPEAR, and VEPP. In this report the basic properties of synchrotron radiation will be discussed, a short overview will be given of the existing and new facilities, some aspects of the optimization of a structure for a synchrotron radiation source will be discussed and the addition of wigglers and undulators for spectrum enhancement will be described. Finally, some parameters of an optimized synchrotron radiation source will be given.

A leading-edge hardware family for diagnostics applications and low-level RF in CERN's ELENA ring

CERN Document Server

Angoletta, M E; Jaussi, M; Leiononen, P; Levens, T E; Molendijk, J C; Sanchez-Quesada, J; Simonin, J

2013-01-01

The CERN Extra Low ENergy Antiproton (ELENA) Ring is a new synchrotron that will be commissioned in 2016 to further decelerate the antiprotons transferred from the CERN’s Antiproton Decelerator (AD). The requirements for the acquisition and treatment of signals for longitudinal diagnostics are very demanding, owing to the revolution frequency swing as well as to the digital signal processing required. The requirements for the Low-Level Radio-Frequency (LLRF) system are very demanding as well, especially in terms of revolution frequency swing, dynamic range and low noise required by the cavity voltage control and digital signal processing to be performed. Both sets of requirements will be satisfied by using a leading-edge hardware family, developed to cover the LLRF needs of all synchrotrons in the Meyrin site; it will be first deployed in 2014 in the CERN’s PSB and in the medical machine MedAustron. This paper gives an overview of the main building blocks of the hardware family and of th...

On-Line Radiation Test Facility for Industrial Equipment needed for the Large Hadron Collider at CERN

CERN Document Server

Rausch, R

1999-01-01

The future Large Hadron Collider to be built at CERN will use superconducting magnets cooled down to 1.2 K. To preserve the superconductivity, the energy deposition dose levels in equipment located outside the cryostat, in the LHC tunnel, are calculated to be of the order of 1 to 10 Gy per year. At such dose levels, no major radiation-damage problems are to be expected, and the possibility of installing Commercial Of The Shelf (COTS) electronic equipment in the LHC tunnel along the accelerator is considered. To this purpose, industrial electronic equipment and circuits have to be qualified and tested against radiation to insure their long term stability and reliability. An on-line radiation test facility has been setup at the CERN Super Proton Synchrotron (SPS) and a program of on-line tests for electronic equipment is ongoing. Equipment tested includes Industrial Programmable Logic Controllers (PLCs) from several manufacturers, standard VME modules, Fieldbuses like Profibus, WorldFIP and CAN, various electro...

Synchrotron radiation

International Nuclear Information System (INIS)

Knotek, M.L.

1987-01-01

Synchrotron radiation has had a revolutionary effect on a broad range of scientific studies, from physics, chemistry and metallurgy to biology, medicine and geoscience. The situation during the last decade has been one of very rapid growth, there is a great vitality to the field and a capability has been given to a very broad range of scientific disciplines which was undreamed of just a decade or so ago. Here we will discuss some of the properties of synchrotron radiation that makes it so interesting and something of the sources in existence today including the National Synchrotron Light Source (NSLS). The NSLS is one of the new facilities built specifically for synchrotron radiation research and the model that was developed there for involvement of the scientific community is a good one which provides some good lessons for these facilities and others

CERN Relay Race

CERN Multimedia

Running Club

2010-01-01

This year’s CERN Relay Race will take place around the Meyrin site on Thursday 20th May at 12h00. This annual event is for teams of 6 runners covering distances of 1000m, 800m, 800m, 500m, 500m and 300m respectively. Teams may be entered in the Seniors, Veterans, Ladies, Mixed or Open categories. The registration fee is 10 CHF per runner, and each runner receives a souvenir prize. As usual, there will be a programme of entertainments from 12h in the arrival area, in front of the Restaurant no. 1. Drinks, food, CERN club information and music will be available for the pleasure of both runners and spectators. The race starts at 12h15, with results and prize giving at 13:15.   For details of the race, and of how to sign up a team, please visit: https://espace.cern.ch/Running-Club/CERN-Relay The event is organised by the CERN Running Club with the support of the CERN Staff Association.  

Sharing resources@CERN

CERN Multimedia

2002-01-01

The library is launching a 'sharing resources@CERN' campaign, aiming to increase the library's utility by including the thousands of books bought by individual groups at CERN. This will improve sharing of information among CERN staff and users. Until now many people were unaware that copies of the same book (or standard, or journal) are often held not only by the library but by different divisions. (Here Eduardo Aldaz, from the PS division, and Isabel Bejar, from the ST division, read their divisional copies of the same book.) The idea behind the library's new sharing resources@CERN' initiative is not at all to collect the books in individual collections at the CERN library, but simply to register them in the Library database. Those not belonging to the library will in principle be unavailable for loan, but should be able to be consulted by anybody at CERN who is interested. "When you need a book urgently and it is not available in the library,' said PS Division engineer Eduardo Aldaz Carroll, it is a sham...

CERN Pensioners Association

CERN Multimedia

The GAC Committee

2004-01-01

Open Day To all CERN retired staff As part of the celebrations organised for the 50th anniversary of CERN, an Open Day will be held on Saturday 16 October 2004. Anyone willing to act as a guide, either to help and inform visitors at the reception points or to guide groups of visitors, sharing your knowledge with them, is invited to fill in the attached form. A preparatory meeting will be arranged for those who left CERN some time ago and whose knowledge of the site may no longer be quite up-to-date. The Open Day organisers need your help, which will be very much appreciated. We hope that many pensioners will participate. People with internet access may enrol directly without coming to CERN, http://www.cern.ch/CERN50/openday The GAC Committee OPEN DAY : CALL FOR VOLUNTEERS 16th October 2004 So now you are excited about the Open Day, how can you participate? As you can imagine, for such a large number of activities, we need many volunteers. Please return the following form to Elena Battis...

CERN Holiday Gift Guide

CERN Multimedia

2013-01-01

Do you have last-minute gifts to get? Stuck for ideas? The CERN Shop and the ATLAS and CMS secretariats have some wonderfully unique gifts and stocking-fillers for sale this year - perfect for the physics fanatics in your life. Let's take a look...   1. CERN Notebook, 10 CHF - 2. CERN Pop-up book, 30 CHF - 3. USB Stick 8GB, 25 CHF - 4. CERN Tumbler, 12 CHF 5. ATLAS 3D Viewer, 5 CHF - 6. ATLAS Puzzle, 15 CHF - 7. CMS Umbrella, 25 CHF   These gifts are all available at the CERN Shop, with the exception of the ATLAS 3D Viewer and the CMS umbrella, which are only available from the respective secretariats. Don’t forget! If you’re from CERN, you still have time to take advantage of a 10% off discount at the CERN shop. Offer ends 20 December.

The CERN's year

International Nuclear Information System (INIS)

Chadli, M.; Coppier, H.; Pezzeti, M.

2007-01-01

CERN, the European organization for nuclear research, has just celebrated its fifty years of existence. Its first goal was to counterbalance the migration of physics scientists towards the USA by the creation of a physics laboratory gathering scientists from the different European countries. Today, the CERN's mission has changed and has overcome all the expectations of its founders. In 2008, it will become, with the LHC (Large Hadron Collider), the biggest particle accelerator in the world. The CERN employs about 3000 physicists, engineers, technicians and workers. There is also 6500 people from 80 different countries who use the CERN's facilities during the year. The CERN is controlled by 20 European member states and 6 observer countries, and 20 non-member countries participate to the programs in progress. The CERN's power comes from its international and cosmopolitan spirit. The whole most famous physicists of the world can work together for the progress of science and for a better understanding of matter, of its interactions and of our universe. Two Nobel prices of physics come from the CERN: C. Rubbia and S. Van der Meer in 1983 for the discovery of W + , W - and Z 0 bosons, and G. Charpak for the development of particle detectors. One can foresee that the LHC will allow new scientific achievements, like for instance, during experiments for the quest of the famous Higgs boson. It is important also to mention that the CERN has been at the origin of several technological innovations in all technical and engineering domains in the framework of its fundamental physics researches. (J.S.)

Novel apparatus and methods for performing remotely controlled particle-solid interaction experiments at CERN

Science.gov (United States)

Krause, H. F.; Deveney, E. F.; Jones, N. L.; Vane, C. R.; Datz, S.; Knudsen, H.; Grafström, P.; Schuch, R.

1997-04-01

Recent atomic physics studies involving ultrarelativistic Pb ions required solid target positioners, scintillators, and a sophisticated data acquisition and control system placed in a remote location at the CERN Super Proton Synchrotron near Geneva, Switzerland. The apparatus, installed in a high-radiation zone underground, had to (i) function for months, (ii) automatically respond to failures such as power outages and particle-induced computer upsets, and (iii) communicate with the outside world via a telephone line. The heart of the apparatus developed was an Apple Macintosh-based CAMAC system that answered the telephone and interpreted and executed remote control commands that (i) sensed and set targets, (ii) controlled voltages and discriminator levels for scintillators, (iii) modified data acquisition hardware logic, (iv) reported control information, and (v) automatically synchronized data acquisition to the CERN spill cycle via a modem signal and transmitted experimental data to a remote computer. No problems were experienced using intercontinental telephone connections at 1200 baud. Our successful "virtual laboratory" approach that uses off-the-shelf electronics is generally adaptable to more conventional bench-type experiments.

Integrity at CERN

CERN Document Server

Department, HR

2015-01-01

In the fulfillment of its mission, CERN relies upon the trust and material support of its Member States and partners, and is committed to exercising exemplary stewardship of the resources with which it is entrusted. Accordingly, CERN expects the highest level of integrity from all its contributors (whether members of the personnel, consultants, contractors working on site, or persons engaged in any other capacity at or on behalf of CERN). Integrity is a core value of CERN, defined in the Code of Conduct as “behaving ethically, with intellectual honesty and being accountable for one’s own actions”.

Shielding Studies for the CERN Super-Proton-Synchrotron at Experimental Point 5

CERN Document Server

Müller, Mario J

2004-01-01

The European Laboratory for Particle Research, CERN has been operated the Super Proton Sychrotron (SPS) for more than 30 years with the shielding design knowledge of the early 70s. At that time particle transport codes were neither available nor capable of dealing with deep lateral shielding calculations. For the future LHC increasing projected values of beam intensity in the SPS and decreasing limits to radiation exposure have led to the need to re-assess the shielding at point 5 of the SPS. 20 years ago this area housed the UA1 experiment of Carlo Rubbia (nobel-price 1984). The thesis describes a re-assessment based on simulations using the multi-purpose radiation transport codes FLUKA and MCNPX. The latter one was utilized for geometry design and to compare variance reduction methods. Different assumed beam-loss points along the beam-line together with fluence-to-doserate conversion calculations were used to find the worst case scenario. Dose-rates as well as particle-energy spectra inside the accessible a...

CernVM Online and Cloud Gateway: a uniform interface for CernVM contextualization and deployment

International Nuclear Information System (INIS)

Lestaris, G; Charalampidis, I; Berzano, D; Blomer, J; Buncic, P; Ganis, G; Meusel, R

2014-01-01

In a virtualized environment, contextualization is the process of configuring a VM instance for the needs of various deployment use cases. Contextualization in CernVM can be done by passing a handwritten context to the user data field of cloud APIs, when running CernVM on the cloud, or by using CernVM web interface when running the VM locally. CernVM Online is a publicly accessible web interface that unifies these two procedures. A user is able to define, store and share CernVM contexts using CernVM Online and then apply them either in a cloud by using CernVM Cloud Gateway or on a local VM with the single-step pairing mechanism. CernVM Cloud Gateway is a distributed system that provides a single interface to use multiple and different clouds (by location or type, private or public). Cloud gateway has been so far integrated with OpenNebula, CloudStack and EC2 tools interfaces. A user, with access to a number of clouds, can run CernVM cloud agents that will communicate with these clouds using their interfaces, and then use one single interface to deploy and scale CernVM clusters. CernVM clusters are defined in CernVM Online and consist of a set of CernVM instances that are contextualized and can communicate with each other.

Tunnel Linking the CERN Sites: Discontinuation of the (small) 'Attestation CERN'

CERN Multimedia

Service des Relations avec les Pays-hôtes

2004-01-01

With effect from 1st June 2004, members of the personnel whose contracts with the Organization are too short for them to hold legitimation documents issued by the Host States will be required to carry only the following documents to use the Tunnel linking the CERN sites: their national identity card, if accepted by the French and Swiss regulations, or their passport (with a visa/visas if required by the French and/or Swiss regulations) and their blue CERN card (access card). The (small) 'Attestation CERN' (CERN certificate) issued by the Users Office or the Human Resources Department will no longer be required. This amendment to paragraph 10 b) and to Annex 3 of the Rules for Use of the Tunnel (ref. CERN/DSU-DO/RH/8200) is related to the addition of an expiry date on blue CERN cards, which has been compulsory since 1st January 2003, and to the recording of all relevant information in the database used for the systematic checking of tunnel users by means of card readers installed at the tunnel. Relations...

CERN - better than science fiction!

CERN Document Server

2007-01-01

From left to right: Allan Cameron (Production Designer), Sam Breckham (Location Manager), James Gillies (Head of Communication at CERN), Jacques Fichet (from the CERN audiovisual service), Rolf Landua (former spokesman of the ATHENA antihydrogen experiment at CERN and Head of CERN's Education Group), Ron Howard, and Renilde Vanden Broeck (CERN press officer).

The 1956 CERN Symposium

CERN Document Server

Jarlskog, Cecilia

2014-01-01

CERN, currently the largest organization in the world for particle physics, was founded in 1954. Originally located in Meyrin, at the outskirts of the city of Geneva in Switzerland, it has with time extended into neighboring France. The Theoretical Study Division of CERN, however, was created already in 1952, i.e., before the official inauguration of CERN. It was situated in Copenhagen. Christian Møller [1] was appointed (part-time) as the Director and there were two full time senior staff members, Gunnar Källén and Ben R. Mottelson. While constructing buildings and accelerators were in progress, an international conference was organized by CERN in the city of Geneva. This “CERN Symposium on High Energy Accelerators and Pion Physics”, 11–23 June 1956, attracted about 250 participants from outside CERN, among them at least 18 Nobel Laureates or future Laureates. Unfortunately, the participants from CERN are not listed in the Proceedings [2]. The conference focused on measuring devices such as bubbl...

CERN: Digitally open, too

CERN Multimedia

Computer Security Team

2013-01-01

The Open Days are here!! From tomorrow onwards, we will be welcoming thousands of people to CERN. No barriers, no boundaries!   For decades, we have welcomed researchers and visitors from around the world to work at CERN, discuss physics research and attend our training sessions, lectures and conferences. This is how fundamental research should be conducted!!! But have you ever noticed how you are welcome at CERN in the digital world, too? Once you are affiliated and are registered with CERN, you receive a CERN computing account and e-mail address.  You can register your laptops, PCs and smartphones to use our (wireless) network, you can easily create your personal webpage, and profit from a vast disk space for file storage (AFS and DFS). CERN is indeed an Open Campus and not only during the Open Days. CERN is an Open Campus in the digital world. This digital Open Campus culture is exactly the reason why “computer security” has been dele...

Programmed improvements of the alternating gradient synchrotron complex at Brookhaven National Laboratory, Upton, New York. Environmental assessment

International Nuclear Information System (INIS)

1994-03-01

The purpose and need for DOE to undertake the actions described in this document are to improve the efficiency of the Alternating Gradient Synchrotron (AGS) complex. Benefits would include optimization of the AGS scientific program, increased high-energy and nuclear physics experimentation, improved health and safety conditions for workers and users, reduced impact on the environment and the general public, energy conservation, decreased generation of hazardous and radioactive wastes, and completion of actions required to permit the AGS to be the injector to the Relativistic Heavy Ion Collider (RHIC)., Improved efficiency is defined as increasing the AGS's capabilities to capture and accelerate the proton intensity transferred to the AGS from the AGS booster. Improved capture of beam intensity would reduce the beam losses which equate to lost scientific opportunity for study and increased potential for radiation doses to workers and the general public. The action would also refurbish magnets used in the transfer tunnel which connects the AGS complex to RHIC to permit smooth injection of beam into the RHIC accelerator. These magnets were previously used to direct beam to fixed targets for high energy physics studies but have hot received proper maintenance to be reliable as injectors to RHIC. The document describes alternative actions, the affected environment, and environmental impacts

Pressure induced Ag{sub 2}Te polymorphs in conjunction with topological non trivial to metal transition

Energy Technology Data Exchange (ETDEWEB)

Zhu, J.; Zhang, S. J., E-mail: sjzhang@iphy.ac.cn, E-mail: jin@iphy.ac.cn; Yu, X. H.; Yu, R. C.; Jin, C. Q., E-mail: sjzhang@iphy.ac.cn, E-mail: jin@iphy.ac.cn; Dai, X.; Fang, Z. [Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Oganov, A. R. [Department of Geosciences, University of New York at Stony Brook (United States); Feng, W. X.; Yao, Y. G. [Department of Physics, Beijing Institute of Technology, Beijing (China); Zhu, J. L. [High Pressure Science and Engineering Center, University of Nevada, Las Vegas, Nevada 89154 (United States); Zhao, Y. S. [Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); South University of Science and Technology of China, Shenzhen, Guangdong (China)

2016-08-15

Silver telluride (Ag{sub 2}Te) is well known as superionic conductor and topological insulator with polymorphs. Pressure induced three phase transitions in Ag{sub 2}Te have been reported in previous. Here, we experimentally identified high pressure phase above 13 GPa of Ag{sub 2}Te by using high pressure synchrotron x ray diffraction method in combination with evolutionary crystal structure prediction, showing it crystallizes into a monoclinic structure of space group C2/m with lattice parameters a = 6.081Å, b = 5.744Å, c = 6.797 Å, β = 105.53°. The electronic properties measurements of Ag{sub 2}Te reveal that the topologically non-trivial semiconducting phase I and semimetallic phase II previously predicated by theory transformed into bulk metals for high pressure phases in consistent with the first principles calculations.

MapCERN: the CERN map on your mobile

CERN Multimedia

Anaïs Schaeffer

2011-01-01

On the initiative of the GS Department, a new smartphone application called MapCERN has just been released. Available in two different versions – one from the Apple Store for iPhones and the other from the web for Android and Blackberry – it will help you to find the building you're looking for more easily.     The Globe of Science and Innovation as "seen" in the augmented reality of the iPhone.  You've got an appointment with someone at the other end of the CERN site and you're planning to use the CERN map to find your way there but you suddenly realise you've left it in your office… No need to panic! Simply take out your smartphone and let it guide you to the building you're looking for. This first official CERN application, which has been developed by the GS Department in collaboration with private industry, is available free of charge from the Apple Store in the case of iPhones an...

First experience with carbon stripping foils for the 160 MeV H- injection into the CERN PSB

Science.gov (United States)

Weterings, Wim; Bracco, Chiara; Jorat, Louise; Noulibos, Remy; van Trappen, Pieter

2018-05-01

160 MeV H- beam will be delivered from the new CERN linear accelerator (Linac4) to the Proton Synchrotron Booster (PSB), using a H- charge-exchange injection system. A 200 µg/cm2 carbon stripping foil will convert H- into protons by stripping off the electrons. The H- charge-exchange injection principle will be used for the first time in the CERN accelerator complex and involves many challenges. In order to gain experience with the foil changing mechanism and the very fragile foils, in 2016, prior to the installation in the PSB, a stripping foil test stand has been installed in the Linac4 transfer line. In addition, parts of the future PSB injection equipment are also temporarily installed in the Linac4 transfer line for tests with a 160 MeV H- commissioning proton beam. This paper describes the foil changing mechanism and control system, summarizes the practical experience of gluing and handling these foils and reports on the first results with beam.

Spatial and temporal beam profile monitor with nanosecond resolution for CERN's Linac4 and Superconducting Proton Linac

CERN Document Server

Hori, M

2008-01-01

The Linac4, now being developed at CERN, will provide 160-MeV H- beams of high intensity . Before this beam can be injected into the CERN Proton Synchrotron Booster or future Superconducting Proton Linac for further acceleration, some sequences of 500-ps-long micro-bunches must be removed from it, using a beam chopper. These bunches, if left in the beam, would fall outside the longitudinal acceptance of the accelerators and make them radioactive. We developed a monitor to measure the time structure and spatial profile of this chopped beam, with respective resolutions and . Its large active area and dynamic range also allows investigations of beam halos. The ion beam first struck a carbon foil, and secondary electrons emerging from the foil were accelerated by a series of parallel grid electrodes. These electrons struck a phosphor screen, and the resulting image of the scintillation light was guided to a thermoelectrically cooled, charge-coupled device camera. The time resolution was attained by applying high-...

CERN honours its guides

CERN Multimedia

2004-01-01

At the end of January, CERN's guides were rewarded for their devotion to the Laboratory. They have a passion for their work, know CERN inside-out and for 40 years have shown people of all ages and nationalities, from all walks of life, around the Laboratory. Who are they? Why, the CERN guides, of course. On 27 January, ten of CERN's 180 guides received special honours for their impressive number of guided tours in 2003. Presenting the awards in the Microcosm hall, CERN's Director-General Robert Aymar congratulated the winners on the key role they play with respect to the general public. "CERN would be nothing without you who show them its activities," he stressed. CERN's Director-General Robert Aymar congratulates Alberto Ribon for his tally of over 40 visits in the course of 2003.One of the prizes was the book «The Particle Odyssey». Here the book's co-author Christine Sutton dedicates it for Sijin Qian. Tzanko Spassoff (PH) and retired staff members Klaus Batzner and Antonio Francano wo...

Inspired by CERN

CERN Multimedia

2004-01-01

Art students inspired by CERN will be returning to show their work 9 to 16 October in Building 500, outside the Auditorium. Seventeen art students from around Europe visited CERN last January for a week of introductions to particle physics and astrophysics, and discussions with CERN scientists about their projects. A CERN scientist "adopted"each artist so they could ask questions during and after the visit. Now the seeds planted during their visit have come to fruition in a show using many media and exploring varied concepts, such as how people experience the online world, the sheer scale of CERN's equipment, and the abstractness of the entities scientists are looking for. "The work is so varied, people are going to love some pieces and detest others," says Andrew Charalambous, the project coordinator from University College London who is also curating the exhibition. "It's contemporary modern art, and that's sometimes difficult to take in." For more information on this thought-provoking show, see: htt...

CERN Mobility Survey

CERN Multimedia

GS Department

2011-01-01

The Institute of Shipping and Transport of the University of the Aegean and the National Technical University of Athens are partners with CERN in a study of mobility patterns between and within the CERN sites and to that effect have realized a mobility survey dedicated to the CERN community.         The study aims to understand: How you presently get around the CERN sites; What problems you encounter regarding mobility; What your needs are; What improvements you’d like to see; What measures you would like to see implemented most. The replies we receive will enable us to define a general policy promoting the diversity of mobility at CERN and to establish and quantify the strategic actions to be implemented for both the short and medium term. The objectives of the transport mobility plans are to: Facilitate mobility within and between the CERN sites by identifying adequate solutions in response to individual ...

France at CERN

CERN Multimedia

2001-01-01

From 19 to 22 June, for the 8th edition of France at CERN, 31 French companies presented their latest technology to the Laboratory. Demonstrating the latest in French technology during France at CERN. The France at CERN exhibition was inaugurated by Mr. Bernard Frois, Director of the Department Energy, Transport, Environment and Natural Resources at the Technology Directorate of the Ministry of Research. 'France is happy to be a Member of CERN, which is a successful example of the construction of scientific Europe,' he declared during the inauguration, 'this exhibition is an excellent opportunity to put fundamental research and advanced technology in contact.' Mr. Philippe Petit, French Ambassador to Switzerland, and Mr. Alexandre Defay, technical adviser of the Minister of Research, were also present to represent France and its industry. Representing CERN at the 19 June opening of the exhibition was Claude Detraz, who said, 'I hope that this exhibition will make it possible to weave stronger links between ...

Sharing resources@CERN

CERN Multimedia

Maximilien Brice

2002-01-01

The library is launching a 'sharing resources@CERN' campaign, aiming to increase the library's utility by including the thousands of books bought by individual groups at CERN. This will improve sharing of information among CERN staff and users. Photo 01: L. to r. Eduardo Aldaz, from the PS division, Corrado Pettenati, Head Librarian, and Isabel Bejar, from the ST division, read their divisional copies of the same book.

Britain at CERN

CERN Multimedia

CERN Press Office. Geneva

1994-01-01

Thirty-two British hi-tech companies present their products at this new industrial exhibition at CERN which takes place from 22 to 25 November, 1994. The exhibition offers British companies the opportunity to display their products in fields that are of immediate importance to the scientists, engineers and technicians working at CERN, and also to scientists from non-Member States who take part in research projects at CERN.

Fusion Revisits CERN

CERN Multimedia

2001-01-01

It's going to be a hot summer at CERN. At least in the Main Building, where from 13 July to 20 August an exhibition is being hosted on nuclear fusion, the energy of the Stars. Nuclear fusion is the engine driving the stars but also a potential source of energy for mankind. The exhibition shows the different nuclear fusion techniques and research carried out on the subject in Europe. Inaugurated at CERN in 1993, following collaboration between Lausanne's CRPP-EPFL and CERN, with input from Alessandro Pascolini of Italy's INFN, this exhibition has travelled round Europe before being revamped and returning to CERN. 'Fusion, Energy of the Stars', from 13 July onwards, Main Building

Status and plans for 2013, CERN NA63

CERN Document Server

Andersen, K K

2012-01-01

We summarize the status and plans for the future for the CERN NA63 collaboration. Our results for the quantum synchrotron radiation emission, measured in 2009, have been published \\cite{Ande12b}. Owing to the close relation between the strong field radiation emission in crystals and beamstrahlung emission at the interaction point of a linear collider, we have in essence tested the approach to calculating the effective luminosity decrease from radiation loss in such machines. A systematic study of the structured target 'resonance' appearing from radiation emission by electrons passing two amorphous foils positioned with separations in the range $10-20000~\\mu$m was performed in september 2012. Preliminary results confirm a previously obtained result \\cite{Ande12a} that by this method, the formation length - of macroscopic dimensions up to 0.5 mm - for the generation of MeV-GeV radiation from multi-hundred GeV electrons can be \\emph{directly} measured. In fact the results obtained allow a distinction between com...

CERN Services Availability during the CERN Annual Closure 2011

CERN Multimedia

IT & GS Departments

2011-01-01

General Services: Most of the services provided by the GS Department that do not depend on continuous human presence will remain available during the CERN annual closure. Support levels are reduced during this period, in general the target reaction time for problems will be ½ day. Apart from the heating system, no interruptions are scheduled. In case of failure, the reaction time for restoration of services depends on the arrangements that have been made on a service by service level. Incidents will be documented at http://gssb.web.cern.ch/ For more detailed information please consult the service-portal (http://cern.ch/service-portal). Computing Services Most of the services provided by the IT Department - including WLCG production services - will remain available during the CERN annual closure. No interruptions are scheduled but in case of failure, the restoration of services cannot be guaranteed. Problems will be dealt with on a best effort basis only. However, please note: Experts shoul...

The Septum Magnet System of the New Fast Extraction Channel of the SPS at CERN

CERN Document Server

Balhan, B; Rizzo, A; Weterings, W

2004-01-01

In the Long Straight Section LSS4 of the Super Proton Synchrotron (SPS) at CERN, a new fast extraction system has been installed in order to extract the beam to ring 2 of the Large Hadron Collider (LHC) and the CERN Neutrino to Gran Sasso facility (CNGS). The system consists of horizontal closed orbit bumper magnets, extraction kicker magnets, enlarged aperture quadrupoles and six conventional DC electromagnetic septum magnets (MSE). A protection element (TPSG) has been placed immediately upstream of the first septum coil. The septum magnets and TPSG are mounted on a single mobile retractable support girder. The MSE septa are connected by a so-called plug-in system to a rigid water-cooled bus-bar, powered by water-cooled cables. The whole system is kept at the required vacuum pressure by ion pumps attached to separate pumping modules. In this note we present the design features and parameters of the MSE septum magnets, describe the function of the related main equipment elements, briefly report on the control...

Basis of medical accelerator. Synchrotron

International Nuclear Information System (INIS)

Kawachi, Kiyomitsu

2014-01-01

On the synchrotron as a medical accelerator, this paper introduces the basic principle, basic techniques and the like. The accelerator, when synchrotron is adopted as an ion beam radiotherapy system, is the composite accelerator composed of ion sources, injector, and synchrotron. This paper introduces the overall structure of synchrotron, and conceptually explains the basic behavior of high-frequency waves and magnetic field of synchrotron, as well as the deflection electromagnet of medical synchrotron and the operation pattern of high-frequency acceleration system. The types of synchrotron can be classified to the function combination type and function separation type, and this paper introduces the features of each type and various types of synchrotrons. It also explains beam dynamics important for ensuring the stability of beams, with a focus on the coordinate system, vertical movement, and lateral movement. In addition, it explains the incidence and outgoing of beams that are important for properly operating the accelerator, with a focus on their techniques. (A.O.)

The Duke of York visits CERN

CERN Multimedia

2004-01-01

The Duke of York chats before inaugurating the UK@CERN exhibition. From left to right: Robert Aymar, CERN's Director General, the Duke of York, and leading UK scientists at CERN: Jim Virdee, CMS deputy spokeman; theorist John Ellis ; and Steve Myers, head of the AB Department. On 23 November, the Duke of York visited CERN and, in his capacity as the UK's Special Representative for International Trade and Investment, inaugurated the UK@CERN Exhibition. This biennial trade show was initially held in 1968, the first such exhibition by a CERN member state. This year 22 companies displayed goods and services that could be of interest to CERN scientists. In his inaugural speech, the Duke emphasized that business between companies and CERN "is a two-way information flow with mutual benefits." The companies make sales but also benefit from technologies that CERN transfers to them. CERN benefits from the exchange, the Duke said, addressing CERN's scientists, because it "frees your time for what you do best: science....

See how people wished CERN a happy birthday with #MyCERN60

CERN Multimedia

Kate Kahle

2014-01-01

In the run up to 29 September, the hashtag #MyCERN60 gave CERN people and CERN’s followers on social media the chance to wish CERN a happy 60th birthday. Here are some of the highlights.   When tasked with wishing the European Laboratory for Particle Physics a happy 60th birthday, what would you do? Would you draw a picture? Bake a cake? #MyCERN60 on Twitter (EN, FR), Facebook, Google+ and social.cern.ch, gave people the opportunity to send a personal birthday greeting to the Organization. The results were heart-warming. Below is a selection of some of the messages received: Image credits: top left Sanam Ganjian via Google+, top right Rose Hannert via Twitter, middle left Anna P and Tina Nantsou via Facebook, middle right Francesco Palmonari via Twitter, bottom left  Smita Darmora via Facebook, bottom middle Hannah McClow via Twitter, bottom right Katya Chong via Twitter. Croatian students from the "Fran Galović" Koprivnica school celebrating CERN...

CREATIVE COLLISIONS: ARTS @CERN

CERN Multimedia

CERN. Geneva

2012-01-01

In 2000, CERN hosted Signatures of the Invisible – one of the landmark initiatives in arts and science. In 2012, CERN is now initiating its own science/arts programme Collide@CERN in different arts disciplines. The first of these is in digital arts, and the international competition to find the winning artist is called the Prix Ars Electronica Collide@CERN. It was announced September 2011 at CERN’s first collaboration with an international arts festival – Ars Electronica in Linz. The competition attracted over 395 entries from 40 countries around the world. The winning artist, Julius Von Bismarck, will begin his two month residency here at CERN next month. Ariane Koek who leads on this initiative, discusses the residency programme, as well as the background about Art@CERN. History has shown that particle physics and the arts are great inspiration partners. The publication of the paper by Max Planck which gave birth to quantum mechanics as well as those by Einstein, heavily influenced some of the grea...

CERN and the environment

CERN Multimedia

Corinne Pralavorio

2016-01-01

New webpages answer common questions about CERN and the environment.   One of the new public webpages dedicated to CERN and the environment. Do your neighbours ever ask you about CERN’s environmental impact? And about radiation in particular? If so, the answers to those questions can now be found online on a new set of public webpages dedicated to CERN and the environment. These pages, put together by the Occupational Health, Safety and Environmental Protection (HSE) unit and the groups responsible for CERN's site maintenance, contain a wealth of information on topics linked to the environment, such as biodiversity at CERN, waste management, ionising radiation, and water and electricity consumption. “CERN forms part of the local landscape, with its numerous sites and scientific activities. It’s understandable that people living nearby have questions about the impact of these activities and it’s important that we respond with complete transp...

German visits to CERN

CERN Multimedia

2007-01-01

State secretary to Germany's Federal Ministry of Education and Research, Frieder Meyer-Krahmer, with CERN's Director-General Robert Aymar.On 21 February, Professor Frieder Meyer-Krahmer, State Secretary to Germany's Federal Ministry of Education and Research, came to CERN. He visited the ALICE and ATLAS experiments and the computing centre before meeting the CERN's Director-General, some German physicists and members of the top management. The Minister of Science, Research and the Arts of the Baden-Württemberg regional government, Peter Frankenberg, and CERN's Director-General, Robert Aymar, signing an agreement on education. In the background: Sigurd Lettow, CERN's Director of Finance and Human Resources, and Karl-Heinz Meisel, Rector of the Fachhochschule Karlsruhe. The Minister of Science, Research and the Arts of the Baden-Württemberg regional government, Prof. Peter Frankenberg, visited CERN on 23 February. He was accompanied by the Rector of the Fachhochschule Karlsruhe, Prof. Karl-Heinz Meisel, and b...

CERN Relay Race

CERN Document Server

CERN Running Club

2010-01-01

The CERN relay race will take place around the Meyrin site on Thursday 20 May, starting at 12.15. If possible, please avoid driving on the site during this 20-minute period. If you do meet runners while driving your car, please STOP until they have all passed. Thank you for your cooperation. Details on the route, and how to register your team for the relay race, can be found at: https://espace.cern.ch/Running-Club/CERN-Relay

The voice of Austrians at CERN

CERN Multimedia

2009-01-01

On 7 May the Austrian Minister for Science announced that, after over 50 years of membership, Austria would withdraw from CERN. By 18 May the Austrian Chancellor had reversed the decision. The Bulletin spoke to some of the Austrian community at CERN about the rollercoaster of events in between. var flash_video_player=get_video_player_path(); insert_player_for_external('Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-0753-kbps-640x360-25-fps-audio-64-kbps-44-kHz-stereo', 'mms://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-Multirate-200-to-753-kbps-640x360-25-fps.wmv', 'false', 533, 300, 'https://mediastream.cern.ch/MediaArchive/Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-posterframe-640x360-at-10-percent.jpg', '1180837', true, 'Video/Public/Movies/2009/CERN-MOVIE-2009-056/CERN-MOVIE-2009-056-0600-kbps-maxH-360-25-fps-audio-128-kbps-48-kHz-stereo.mp4'); To watch this video in German click here. There was jubil...

CERN Phonebook evolution

CERN Multimedia

Sébastien Dellabella

2012-01-01

Consolidating phonebooks at CERN We have had many phonebooks in the past, Xwho (now decommissioned), the NICE phonebook on Windows PCs, and more recently the web site people.cern.ch. However, diversity doesn’t always equate to improved efficiency or quality. So in order to reduce the maintenance effort and to improve the user experience, we have consolidated these various phonebooks into a single web application: phonebook.cern.ch Motivations for change The NICE Phonebook was introduced in the year 2000 when Windows 95 was the major desktop platform. Since then, a lot has changed not only in technology and the desktop landscape but also in the variety of devices used to access the data (notably smartphones and tablets). Updating the NICE phonebook is slow. Once the master database is modified it can take up to two days for the data to propagate to the application. Thus, we are now planning the retirement of the NICE phonebook application. The new Phonebook.cern.ch The new phonebook.cern.ch...

Apprenticeship at CERN

CERN Multimedia

Staff Association

2016-01-01

In 1961, based on the finding that the evolution of the labour market created a growing need for qualified staff, a first agreement between the Republic and Canton of Geneva and CERN was signed. One of the objectives of this agreement was the vocational training of young electronics and physics laboratory technicians. CERN, an important stakeholder in the local economy, highlighted with this agreement its willingness to participate in the local social and economic development. The first apprentice arrived at CERN in 1965. In 1971, the apprenticeship centre was created; it now hosts over twenty apprentices in total and welcomes about six new apprentices each year. These apprenticeships are for young people aged between 15 and 21 years, coming from one of the CERN Member States, and having completed their mandatory education, e.g. 11th grade in Switzerland or 3ème in France. The training is divided between working time at CERN and one or two days per week at school (CFPT in Geneva for electronics or ...

CERN television news

CERN Multimedia

2002-01-01

CERN events brought right to your desktop by the new video bulletin.   CERN now has its very own news broadcast , or rather 'webcast', with a host of special reports and even a star presenter. From today onwards, just go to the Bulletin's web page, click on the 'video news' link and sit back and enjoy the latest news about CERN, presented in images by Wendy Korda. The ten-minute newscast in both French and English, the Organization's two official languages, presents interviews, pictures of experiments and computer-generated graphics, bringing you right up to date with some of the Laboratory's latest stories. The show concludes with a selection of the best snapshots taken by the CERN Photo Lab. So every one or two months CERN's Audio-Video Service (ETT/DH) will be putting together a video news report that you can watch on your own desktop computer. Daniel Boileau, Patrick Gilbert de Vautibault and Jacques Fichet, the Service's three technicians, came up with the idea of producing this regular feat...

CERN Relay Race

CERN Multimedia

2009-01-01

The CERN relay race, now in its 39th year, is already a well-known tradition, but this year the organizers say the event will have even more of a festival feeling. Just off the starting line of the CERN relay race.For the past few years, spectators and runners at the CERN relay race have been able to enjoy a beer while listening to music from the CERN music and jazz clubs. But this year the organizers are aiming for "even more of a festival atmosphere". As David Nisbet, President of the CERN running club and organizer of the relay race, says: "Work is not just about getting your head down and doing the theory, it’s also about enjoying the company of your colleagues." This year, on top of music from the Santa Luis Band and the Canettes Blues Band, there will be demonstrations from the Aikido and softball clubs, a stretching session by the Fitness club, as well as various stalls and of course, the well-earned beer from AGLUP, the B...

Radiography at CERN

CERN Multimedia

HSE Unit

2014-01-01

What is industrial radiography? It is a non-destructive method with a wide variety of applications, such as inspecting the quality of a weld. It uses high-energy radioactive sources or an X-ray generator.   Is this inspection technique used at CERN? Yes, it is widely used at CERN by the EN-MME Group, which outsources the work to one or more companies, depending on the workload. Is it possible to carry out radiography anywhere at CERN? Yes, it is possible to carry out radiography in any building/accelerator/experiment area at CERN (including in areas which are not normally subject to radiological hazards). When is radiography carried out? It normally takes place outside of working hours (7 p.m. to 6 a.m.). How will I know if radiography is taking place in my building? If this activity is planned in a CERN building, notices will be affixed to all of its main entrance doors at least 24 hours in advance. What are the risks? There is a risk of exposure to very high levels of radiation, dep...

CERN CAR STICKERS

CERN Multimedia

Service Accueil et Controle d'Accès; ST Division

1999-01-01

In accordance with Operational Circular n¡ 2, paragraph 21, CERN car stickers are to be renewed. The new stickers are now available and will be valid for a year.Youare therefore requested:either to obtain them from the distribution points for new stickers (see below); or to send us the application form below, duly completed, via the internal mail; or to complete the application form directly via the Web at the address: http://cern.ch/registration-stickers. Each vehicle has to carry a sticker and needs a separate application form.Vehicles bearing CERN diplomatic plates (CD07, 431K and CD series) do not need a sticker for access to the CERN areas.Thank you.List of distribution points:Registration Service (bldg 55 1st floor), open from 07h30 to 16h30. Building 33 (entrance hall), open from 08h00 to 18h00. Building 120 (ground floor), outside working hours.Name Surname CERN identification number Vehicle registration plates Country issuing the plates Vehicle ma...

Experimental status of the AGS Relativistic Heavy Ion Program

International Nuclear Information System (INIS)

Sangster, T.C.

1994-10-01

The universal motivation for colliding large nuclei at relativistic energies is the expectation that a small volume of the primordial quark soup, generally referred to as the Quark-Gluon Plasma (QGP), can be created and studied. The QGP is formed via a phase transition caused by either the extreme baryon densities and/or the extreme temperatures achieved in the overlap zone of the two colliding nuclei. Experiments at the Brookhaven National Laboratory Alternating Gradient Synchrotron (AGS) using a beam of Si nuclei at 14.6 GeV per nucleon on various nuclear targets have been completed. These same experiments are now actively searching for signatures of QGP formation using a beam of Au nuclei at 11.7 GeV per nucleon. This paper briefly summarizes some of the key results from the Si beam program and the current status of the experimental Au beam program at the AGS

Synchrotron radiation

International Nuclear Information System (INIS)

Nave, C.; Quinn, P.; Blake, R.J.

1988-01-01

The paper on Synchrotron Radiation contains the appendix to the Daresbury Annual Report 1987/88. The appendix is mainly devoted to the scientific progress reports on the work at the Synchrotron Radiation Source in 1987/8. The parameters of the Experimental Stations and the index to the Scientific Reports are also included in the appendix. (U.K.)

CERN Library | Book presentation: "60 years of CERN experiments and discoveries" | 15 December

CERN Document Server

CERN Library

2015-01-01

"60 years of CERN experiments and discoveries", edited by Herwig Schopper and Luigi Di Lella.   Tuesday 15 December at 16:00 Room C (Building 61) The presentation will be followed by refreshments The book contains a description of the most important experimental results achieved at CERN during the past 60 years, from the mid-1950s to the latest discovery of the Higgs particle. It covers the results from early accelerators at CERN to the most recent results at the LHC and thus provides an excellent review of the achievements of this outstanding laboratory. It reflects not only the impressive scientific progress achieved during the past six decades but demonstrates also the special way of successful international collaboration developed at CERN. The e-book is available in Open Access here thanks to an agreement between CERN and the publisher. "60 years of CERN experiments and discoveries", ed. by Herwig Schopper and Luigi Di Lella, World Scientific, 2015, ISBN 9789...

Courrier CERN

CERN Multimedia

2015-01-01

Example of the cover page of the French version of the CERN Courier; Courrier CERN from January 1962. The journal was published both in English and French up to volume 45, no. 5, June 2005. Since then there is a single-language edition where articles are published either in French or English with an abstract in the other language.

Design study of a normal conducting helical snake for AGS

CERN Document Server

Takano, Junpei; Okamura, Masahiro; Roser, Thomas; MacKay, William W; Luccio, Alfredo U; Takano, Koji

2004-01-01

A new normal conducting snake magnet is being fabricated for the Alternate Gradient Synchrotron (AGS) at Brookhaven National Laboratory (BNL). In the Relativistic Heavy Ion Collider (RHIC) project, a superconducting type helical dipole magnets had been developed and it performed successfully in high-energy polarized proton acceleration. The new AGS helical snake has the same basic magnetic structure but is more complicated. To achieve no beam shift and no beam deflection in one magnetic device, helical pitches and rotating angles were carefully calculated. Compared to a superconducting magnet, a normal warm magnet must have a large cross- sectional area of conductors which make it difficult to design a magnet with large helical pitch. We developed a modified window frame structure to accommodate the large number of conductors. Its three dimensional magnetic field was simulated by using OPERA3D/TOSCA. 3 Refs.

Design, processing, and properties of Bi 2212\\/Ag Rutherford cables

CERN Document Server

Collings, E W; Scanlan, R M; Dietderich, D R; Motowidlo, L R; Sokolowski, R S; Aoki, Y; Hasegawa, T

1999-01-01

In a program intended to explore the use of high temperature superconducting (HTSC) cables in high field synchrotron dipole magnets model Bi:2212/Ag Rutherford cables were designed bearing in mind the needs for mechanical integrity, relatively high tensile strength, and low coupling losses. To satisfy these needs a core-type cable design was selected and a readily available heat-resistant core material acquired. Cables were wound for critical current- and AC loss measurement. Both winding-induced (mechanical) and core-induced (chemical) critical current degradation was examined. Interstrand coupling loss was measured calorimetrically on model cable samples with bare- and oxide-coated cores. From the results it was predicted that the losses of full-scale Bi:2212/Ag-wound LHC-type Rutherford cables would fall close to the acceptability range for the windings of high-field accelerator dipoles. (10 refs).

Synchrotron radiation facilities

CERN Multimedia

1972-01-01

Particularly in the past few years, interest in using the synchrotron radiation emanating from high energy, circular electron machines has grown considerably. In our February issue we included an article on the synchrotron radiation facility at Frascati. This month we are spreading the net wider — saying something about the properties of the radiation, listing the centres where synchrotron radiation facilities exist, adding a brief description of three of them and mentioning areas of physics in which the facilities are used.

CCLIBS: The CERN Power Converter Control Libraries

CERN Document Server

AUTHOR|(SzGeCERN)404953; Lebioda, Krzysztof Tomasz; Magrans De Abril, Marc; Martino, Michele; Murillo Garcia, Raul; Nicoletti, Achille

2015-01-01

Accurate control of power converters is a vital activity in large physics projects. Several different control scenarios may coexist, including regulation of a circuit’s voltage, current, or field strength within a magnet. Depending on the type of facility, a circuit’s reference value may be changed asynchronously or synchronously with other circuits. Synchronous changes may be on demand or under the control of a cyclic timing system. In other cases, the reference may be calculated in real-time by an outer regulation loop of some other quantity, such as the tune of the beam in a synchrotron. The power stage may be unipolar or bipolar in voltage and current. If it is unipolar in current, it may be used with a polarity switch. Depending on the design, the power stage may be controlled by a firing angle or PWM duty-cycle reference, or a voltage or current reference. All these cases are supported by the CERN Converter Control Libraries (CCLIBS). These open-source C libraries include advanced reference generati...

Results from the CERN pilot CLOUD experiment

CERN Document Server

Duplissy, J; Reichl, U; Winkler, P M; Pedersen, E; Makhmutov, V; Viisanen, Y; Kulmala, M; Wilhelmsson, M; Weingartner, E; Avngaard, M; Curtius, J; Veenhof, R; Laakso, L; Gagne, S; Harrison, R G; Sipila, M; David, A; Seinfeld, J H; Nieminen, T; Verheggen, B; Aplin, K L; Stratmann, F; Arnold, F; Makela, J; Kellett, B; Fastrup, B; Marsh, N D; Lockwood, M; Carslaw, K; Wehrle, G; Aufmhoff, H; Pedersen, J O P; Baltensperger, U; Onnela, A; Laaksonen, A; Enghoff, M B; Svensmark, J; Wex, H; Lillestol, E; Wagner, P E; Kirkby, J; Stozhkov, Y; Polny, J; Bondo, T; Bingham, R; Svensmark, H

2010-01-01

During a 4-week run in October-November 2006, a pilot experiment was performed at the CERN Proton Synchrotron in preparation for the Cosmics Leaving OUtdoor Droplets (CLOUD) experiment, whose aim is to study the possible influence of cosmic rays on clouds. The purpose of the pilot experiment was firstly to carry out exploratory measurements of the effect of ionising particle radiation on aerosol formation from trace H2SO4 vapour and secondly to provide technical input for the CLOUD design. A total of 44 nucleation bursts were produced and recorded, with formation rates of particles above the 3 nm detection threshold of between 0.1 and 100 cm(-3) s(-1), and growth rates between 2 and 37 nm h(-1). The corresponding H2SO4 concentrations were typically around 10(6) cm(-3) or less. The experimentally-measured formation rates and H2SO4 concentrations are comparable to those found in the atmosphere, supporting the idea that sulphuric acid is involved in the nucleation of atmospheric aerosols. However, sulphuric acid...

News regarding Mobility at CERN

CERN Multimedia

2016-01-01

CERN Bikes CERN owns a fleet of more than 500 bikes, managed by the Mobility Centre (bdg. 6167). Members of CERN personnel (MPE and MPA) can use these free of charge during work-related activities at CERN (a security deposit is requested). Between 1st of June to 30th September anyone, except Summer Students, who wish to benefit from this service shall pay 1 CHF per day. As from the 1st of August, the CERN bike rental requests are done via the Service Now (SNOW) Portal. For more information, please consult: http://cern.ch/bike-rental.   CERN Cars More than 60 vehicles are available for rent by members of personnel (MPE and MPA) at the Mobility Center (bdg. 6167). As from the 5th of September you can submit reservation requests via the new EDH Car Rental Request document. As a reminder, the Terms of Use are the following: Operational Circular n° 4 (rev.1), governing the use of CERN vehicles;   Any use of the service must be authorised by the concerned Head of Department or Team Leader...

CERN internal communication is evolving

CERN Multimedia

2016-01-01

CERN news will now be regularly updated on the CERN People page (see here).      Dear readers, All over the world, communication is becoming increasingly instantaneous, with news published in real time on websites and social networks. In order to keep pace with these changes, CERN's internal communication is evolving too. From now on, you will be informed of what’s happening at CERN more often via the “CERN people” page, which will frequently be updated with news. The Bulletin is following this trend too: twice a month, we will compile the most important articles published on the CERN site, with a brand-new layout. You will receive an e-mail every two weeks as soon as this new form of the Bulletin is available. If you have interesting news or stories to share, tell us about them through the form at: https://communications.web.cern.ch/got-story-cern-website​. You can also find out about news from CERN in real time...

Radiation protection activities around the CERN accelerators

International Nuclear Information System (INIS)

Fasso, A.

1996-01-01

In 1995 several operational circumstances required careful watching by the Radiation Protection Group. Most of these were linked with new or recently started CERN activities: for instance the increasing importance assumed by ISOLDE operation and the breakdowns encountered which have given rise to contamination of the target region and to activity releases. In the SPS ring, several difficulties were brought about by a toilsome installation of a new interlock system, while lead ion operation marked the end of the year, as usual, with higher radiation levels in the SPS experimental areas, despite the fact that existing shielding had been improved. Also at the end of the year, the increase of LEP beam energy to 68 GeV caused a rise of dose rate levels from synchrotron radiation. This was expected, but studies are still needed to assess the full implications for different aspects of radiation protection. On the other hand, the ageing of magnet coils and other equipment (insulators, cables, flexible pipes), aggravated by the high proton beam intensities, has resulted in an increasing frequency of failures (mainly water leaks) both at the PS and at the SPS. If the apparent trend is confirmed, difficulties could be expected in the future for two reasons: the shortage of specialized staff, some of them approaching the CERN dose limit of 15 mSv annually, who can be assigned to repair work; and the lack of spare parts to replace the damaged items. Luckily, the long cooling times following high intensity proton runs provided by the operation with heavy-ions and by the winter shutdown mitigate this situation

CAS CERN accelerator school: 5. general accelerator physics course. Vol. 2. Proceedings

International Nuclear Information System (INIS)

Turner, S.

1994-01-01

The fifth CERN Accelerator School (CAS) basic course on General Accelerator Physics was given at the University of Jyvaeskylae, Finland, from 7 to 18 September 1992. Its syllabus was based on the previous similar courses held at Gif-sur-Yvette in 1984, Aarhus 1986, Salamanca 1988 and Juelich 1990, and whose proceedings were published as CERN Reports 85-19, 87-10, 89-05 and 91-04, respectively. However, certain topics were treated in a different way, improved or extended, while new subjects were introduced. As far as the proceedings of this school are concerned the opportunity was taken not only to include the lectures presented but also to select and revise the most appropriate chapters from the previous similar schools. In this way the present volumes constitute a rather complete introduction to all aspects of the design and construction of particle accelerators, including optics, emittance, luminosity, longitudinal and transverse beam dynamics, insertions, chromaticity, transfer lines, resonances, accelerating structures, tune shifts, coasting beams, lifetime, synchrotron radiation, radiation damping, beam-beam effects, diagnostics, cooling, ion and positron sources, RF and vacuum systems, injection and extraction, conventional, permanent and superconducting magnets, cyclotrons, RF linear accelerators, microtrons, as well as applications of particle accelerators (including therapy) and the history of accelerators. See hints under the relevant topics. (orig.)

CERN & Society launches donation portal

CERN Multimedia

Cian O'Luanaigh

2014-01-01

The CERN & Society programme brings together projects in the areas of education and outreach, innovation and knowledge exchange, and culture and arts, that spread the CERN spirit of scientific curiosity for the inspiration and benefit of society. Today, CERN & Society is launching its "giving" website – a portal to allow donors to contribute to various projects and forge new relationships with CERN.   "The CERN & Society initiative in its embryonic form began almost three years ago, with the feeling that the laboratory could play a bigger role for the benefit of society," says Matteo Castoldi, Head of the CERN Development Office, who, with his team, is seeking supporters and ambassadors for the CERN & Society initiative. "The concept is not completely new – in some sense it is embedded in CERN’s DNA, as the laboratory helps society by creating knowledge and new technologies – but we would like to d...

CERN in the park

CERN Multimedia

2002-01-01

CERN will be the centre of debate at a 'Café scientifique' on Monday 29 April. The aim of the Cafés scientifiques, which are organised by the association of Bancs Publics, is to kindle discussion between ordinary people and specialists in a scientific field. This Monday, Maurice Bourquin, President of the CERN Council, Hans Hoffmann, Director of Technology Transfer and Scientific Computing at CERN, Gilbert Guignard, a physicist at CERN, and Ruhal Floris, who teaches mathematical didactics at the University of Geneva, will explain the usefulness and contributions to science of the world's biggest laboratory for particle physics. What is CERN for? Monday 29 April at 18.30 Musée d'histoire des sciences, Geneva (in the park Perle du Lac) Entry free Wine and buffet after the discussion

European Synchrotron Radiation Facility

International Nuclear Information System (INIS)

Buras, B.

1985-01-01

How a European Synchrotron Radiation Facility has developed into a detailed proposal recently accepted as the basis for construction of the facility at Grenoble is discussed. In November 1977, the General Assembly of the European Science Foundation (ESF) approved the report of the ESF working party on synchrotron radiation entitled Synchrotron Radiation - a Perspective View for Europe. This report contained as one of its principal recommendations that work should commence on a feasibility study for a European synchrotron radiation laboratory having a dedicated hard X-ray storage ring and appropriate advanced instrumentation. In order to prepare a feasibility study the European Science Foundation set up the Ad-hoc Committee on Synchrotron Radiation, which in turn formed two working groups: one for the machine and another for instrumentation. This feasibility study was completed in 1979 with the publication of the Blue Book describing in detail the so called 1979 European Synchrotron Radiation Facility. The heart of the facility was a 5 GeV electron storage ring and it was assumed that mainly the radiation from bending magnets will be used. The facility is described

CERN Relay Race 2018

CERN Document Server

CERN Running club

2018-01-01

The CERN running club, in collaboration with the Staff Association, is happy to announce the 2018 relay race edition. It will take place on Thursday, May 24th and will consist as every year in a round trip of the CERN Meyrin site in teams of 6 members. It is a fun event, and you do not have to run fast to enjoy it. Registrations will be open from May 1st to May 22nd on the running club web site. All information concerning the race and the registration are available there too: http://runningclub.web.cern.ch/content/cern-relay-race. A video of the previous edition is also available here : http://cern.ch/go/Nk7C. As every year, there will be animations starting at noon on the lawn in front of restaurant 1, and information stands for many CERN associations and clubs will be available. The running club partners will also be participate in the event, namely Berthie Sport, Interfon and Uniqa.

CERN openlab Open Day

CERN Multimedia

Andrew Purcell

2015-01-01

CERN openlab is the unique public-private partnership between CERN and leading companies in the field of information and communication technology. The programme is now entering an exciting new phase and is expanding to include other public research organisations for the first time. A special event will be held at CERN to mark this occasion.   CERN openlab was created in 2001 and is now entering its fifth three-year phase (2015-2017). Its mission is to accelerate the development of cutting-edge solutions to be used by the scientific community to control the operations of complex machines and to analyse the vast amounts of data produced by physics experiments. During Run 2 of the LHC, it is expected that the CERN Data Centre will store more than 30 petabytes of data per year from the LHC experiments, which is equivalent to about 1.2 million Blu-ray discs, or 250 years of HD video. Testing in this demanding environment provides the companies collaborating in CERN openlab with valuable feedback o...

CERN Yoga club

CERN Multimedia

Le comité du club de yoga du CERN

2017-01-01

Members of the CERN Yoga club are invited to the General Assembly of the club which will take place on: Wednesday 5 July at 14.00 in conference room 504-E-005 (Next to Yoga room) The agenda is available on the club's website: cern.ch/club-yoga/ If you are unable to participate, please elect a proxy voter to vote on your behalf (available from your teacher or in the Yoga room) – these can be addressed to: cernyoga@cern.ch

Britain at CERN

CERN Multimedia

CERN Press Office. Geneva

1998-01-01

It was thirty years ago that British industry held the first ever trade fair at CERN and industrial links between Britain and the Laboratory have never looked back. Speaking at the opening of the 1998 "Britain at CERN" exhibition on 20 October, H.E. Mr Christopher Hulse, British Ambassador to Switzerland, underlined the value of CERN contracts to British industry saying that "The prize is well worth going for, I understand that contracts worth  1.5bn will be awarded over the next six years".

Get all the official CERN holidays automatically added to your CERN mailbox calendar

CERN Multimedia

CERN Mail Services

2013-01-01

A new tool has been created that makes it easy to check the official CERN holidays. These holidays will appear automatically in your calendar. Currently, to check the official CERN holidays, you had to consult either the CERN website or EDH. Now you can see these holidays in your CERN calendar together with absences, meetings and other events. To take advantage of this feature: add yourself as member of the e-group “holidays-to-calendar” here. You can also use this link. Your calendar will be updated the very next day.

"Infinitely CERN Memories from 50 years of research" CERN and Editions Suzanne Hurter are publishing a beautiful book, "Infinitely CERN", to commemorate the human and scientific adventure of CERN.

CERN Multimedia

Maximilien Brice

2004-01-01

The book tells the history of CERN through the voices of those who lived it. Highlights such as scientific events, technical achievements and CERN's role as an international organization in Geneva, are recalled chronologically by people who witnessed them: administrators, engineers and physicists, including Georges Charpak, Carlo Rubbia and Simon van der Meer, who received the Nobel Prize in physics for discoveries made at CERN.

Irradiation Facilities at CERN

CERN Document Server

Gkotse, Blerina; Carbonez, Pierre; Danzeca, Salvatore; Fabich, Adrian; Garcia, Alia, Ruben; Glaser, Maurice; Gorine, Georgi; Jaekel, Martin, Richard; Mateu,Suau, Isidre; Pezzullo, Giuseppe; Pozzi, Fabio; Ravotti, Federico; Silari, Marco; Tali, Maris

2017-01-01

CERN provides unique irradiation facilities for applications in many scientific fields. This paper summarizes the facilities currently operating for proton, gamma, mixed-field and electron irradiations, including their main usage, characteristics and information about their operation. The new CERN irradiation facilities database is also presented. This includes not only CERN facilities but also irradiation facilities available worldwide.

2005 CERN Relay Race

CERN Multimedia

Patrice Loiez

2005-01-01

The CERN Relay Race takes place each year in May and sees participants from all areas of the CERN staff. The winners in 2005 were The Shabbys with Los Latinos Volantes in second and Charmilles Technologies a close third. To add a touch of colour and levity, the CERN Jazz Club provided music at the finishing line.

Brazil and CERN get closer

CERN Multimedia

2002-01-01

The map of countries affiliated to CERN may in future include Brazil. On a visit to CERN last week, the Brazilian Minister of State for Science and Technology, Ronaldo Mota Sardenberg, expressed his country's interest in closer links to the Laboratory.   Luciano Maiani and the Brazilian Minister of State for Science and Technology Ronaldo Mota Sardenberg shake hands on CERN-Brazil co-operation. During his visit, the Minister and CERN Director General Luciano Maiani issued a joint statement for the continuation of a Co-operation Agreement first established in 1990. They also agreed to study the possibility of Brazil joining CERN-led Grid computing infrastructure projects. Brazilian physicists are already involved in the LHCb, ATLAS and CMS experiments. At the conclusion of the Minister's visit, he and Director-General Maiani agreed to establish a Working Group to examine ways of strengthening Brazil's links with CERN, and to prepare the way for a Brazilian request to CERN Council to become an Observer at th...

President of Chile at CERN

CERN Multimedia

2007-01-01

The President of Chile, Michelle Bachelet, in the ATLAS cavern with, from left to right, Peter Jenni, ATLAS Spokesman, Vivian Heyl, CONICYT President, and Robert Aymar, CERN Director-General. Robert Aymar, CERN Director-General, and Vivian Heyl, CONICYT President, signing a cooperation agreement between CERN and Chile’s Comisión Nacional de Investigación Científica y Tecnológica (CONICYT).The President of Chile, Michelle Bachelet, paid a visit to CERN during her three-day tour of Switzerland. The charismatic Michelle Bachelet and her large delegation were greeted by the CERN Director-General and then taken to see the ATLAS experiment and the LHC. She also took time to meet the Chilean community working at CERN, comprising several physicists in the Theory Group and the ATLAS experiment. The meeting was followed by the signing of a cooperation agreement between CERN and Chile’s Comisión Nacional de Investigación Científi...

Academic Training: Joint ILIAS-CAST-CERN Axion Training at CERN

CERN Multimedia

Françoise Benz

2005-01-01

2005-2006 ACADEMIC TRAINING PROGRAMME 30 November, 1 and 2 December PLACE - DETAILS: http://agenda.cern.ch/fullAgenda.php?ida=a056218 Joint ILIAS-CAST-CERN Axion Training at CERN The ILIAS (Integrated Large Infrastructure for Astroparticle Science) is co-organising a 3 day academic training session together with the CAST collaboration and the CERN Academic Training Programme on physics related to axion research, including open discussions between theorists and experimentalists. The intention of the lectures is to provide academic training for scientists engaged in axion research and to facilitate the often missing link between experiment and theory with the aim of encouraging young researchers to communicate with experts in the field. The lectures include topics which are not regularly covered by standard lectures at universities and should lead to a deeper understanding of the physics related to axions, which covers a broad field from QCD to astrophysics and cosmology. There will be an opportunity for ...

RSS based CERN Alerter. Information broadcast to all CERN offices.

CERN Multimedia

Otto, R

2007-01-01

Nearly every large organization uses a tool to broadcast messages and information across the internal campus (messages like alerts announcing interruption in services or just information about upcoming events). These tools typically allow administrators (operators) to send "targeted" messages which are sent only to specific groups of users or computers, e/g only those located in a specified building or connected to a particular computing service. CERN has a long history of such tools: CERNVMS€™s SPM_quotMESSAGE command, Zephyr and the most recent the NICE Alerter based on the NNTP protocol. The NICE Alerter used on all Windows-based computers had to be phased out as a consequence of phasing out NNTP at CERN. The new solution to broadcast information messages on the CERN campus continues to provide the service based on cross-platform technologies, hence minimizing custom developments and relying on commercial software as much as possible. The new system, called CERN Alerter, is based on RSS (Really Simpl...

CERN at the Post Office

CERN Multimedia

2006-01-01

In collaboration with CERN and the Conseil général de l'Ain, the French postal services of the Pays de Gex have released a new set of pre-paid envelopes paying tribute to CERN. The envelopes, which come in packets of ten, each featuring a different aspect of CERN, will be on sale from 6 June onwards. They will be available from five post offices in the Pays de Gex (Ferney-Voltaire, Prévessin-Moëns, Saint-Genis-Pouilly, Thoiry and CERN-Prévessin), as well as from the CERN Shop (Reception, Building 33). The envelopes were unveiled at an official ceremony on 23 May, which was attended by Jocelyne Boch, Vice-President of the Conseil général de l'Ain and Mayoress of Thoiry, as well as Marina Combe, Head of the Saint-Genis-Pouilly, Thoiry and CERN-Prévessin post offices, and Maximilian Metzger, CERN's Secretary-General. The last set of envelopes to feature CERN, which commemorated the Laboratory's 50th anniversary in 2004, were a huge success, with sales totalling 35 000 in less than a year. 'We received...

TARC experiment at CERN

International Nuclear Information System (INIS)

Andriamonje, S.; Arnould, H.; Bompas, C.A.; Del Moral, R.; Lacoste, V.

1997-01-01

It is well-known that a significant part of the world electricity is of nuclear origin (75% in case of France). One of the major current preoccupation is the search for ways to solve the important problems raised by the wastes produced in the nuclear plants to which the wastes of military origin must by added. It is urgently necessary of finding solutions to reduce the amount of wastes produced in the nuclear facilities and plants and if possible to destroy the huge present stocks. To solve these problems a solution advanced by Nobel prize winner C. Rubbia and coll. is the utilisation of hybrid systems i.e the coupling of a particle acceleration to an under-critical reactor. The research of the hybrid system efficiency in transmuting the nuclear wastes, particularly, of the long-lived fission products is presently under way at CERN. The proton beam from the proton synchrotron is injected into a massive hyper-pure lead block. The TARC (Transmutation by Adiabatic Resonance Crossing) experiment is the second stage for the determination of the fundamental parameters associated to the Energy Amplifier Project. The main goal of TARC is to measure the spallation neutron flux and to determine the efficiency of the hybrid systems intended to incinerate the nuclear wastes. The different techniques used are described. The large amount of obtained data are now processed

Lectures for CERN pensioners

CERN Multimedia

GS Department

2009-01-01

The CERN Medical Service and the Pensioners Association are pleased to invite CERN pensioners to a series of lectures given by professors and specialists from the Teaching Hospitals and the Faculty of Medicine of the University of Geneva on the following topic: PROMOTION OF OPTIMUM BRAIN AGEING The lectures will take place in the Main CERN Auditorium (Building 60) from 2.30 p.m. to 4.30 p.m. on the following dates: Thursday 15 January 2009: Diagnosing and treating Alzheimer’s disease Pr Gabriel GOLD Wednesday 25 February 2009: What is the brain reserve? Speaker’s name to be announced at a later date. The lectures will be given in French, with transparencies in English, and will be followed by a wide-ranging debate with the participants. CERN Medical Service - Pensioners Association - CERN-ESO (GAC-EPA)

Chemistry with synchrotron radiation

International Nuclear Information System (INIS)

Preses, J.; Grover, J.R.; White, M.G.; Kvick, A.

1990-01-01

An accidental by-product of high-energy physics, synchrotron radiation, has emerged as one of the most powerful tools for the understanding of chemical reactions. Advances made by using synchrotron radiation in physical chemistry are reviewed herein. Descriptions of experiments exploiting the many ways that synchrotron radiation can be manipulated are presented. These manipulations include intensification of the radiation and compression or shifting of its spectral structure. Combinations of the use of synchrotron radiation, which provides access to very short wavelengths and is, at the same time, continuously and easily tunable, with laser radiation, which offers much higher resolution and much more intense radiation per pulse, but is difficult to tune in the ultraviolet region of the spectra, gives the chemist a way to map a molecule's potential energy curve, to note the lengths and strengths of chemical bonds, and to predict and explain novel reactions of more complex molecules. The use of diffraction of x-rays to study the spacing of atoms in crystals is discussed. Various applications of synchrotron radiation to studies of the fluorescence of hydrocarbons and to the chiral dichroism studies of other natural products like DNA and RNA are described. Methods for enhancing synchrotron light sources by insertion devices, such as wigglers and undulators, that increase the available photo flux and construction of new sources of synchrotron radiation are mentioned

CERN openlab Open Day | 10 June

CERN Multimedia

2015-01-01

CERN openlab is now entering an exciting new phase and is expanding to include other public research organisations for the first time. To mark this occasion, a first-of-its-kind ‘CERN openlab Open Day’ event will be held at CERN on 10 June 2015.   CERN openlab is a unique public-private partnership between CERN and leading ICT companies. Its mission is to accelerate the development of cutting-edge solutions to be used by CERN’s scientific community. The ‘CERN openlab Open Day’ event will take place in the Main Auditorium on 10 June and will be an opportunity to learn more about the work carried out through CERN openlab to help tackle the challenges faced by the scientific community. Find out more: http://indico.cern.ch/event/381083/

Tests of SEC stability in high flux proton beams

International Nuclear Information System (INIS)

Agoritsas, V.; Witkover, R.L.

1979-01-01

The Secondary Emission Chamber (SEC) is used to measure the beam intensity in slow extracted beam channels of proton synchrotrons around the world. With the improvements in machine intensity, these monitors have been exposed to higher flux conditions than in the past. A change in sensitivity of up to 25% has been observed in the region around the beam spot. Using SEC's of special construction, a series of tests was performed at FNAL, BNL-AGS and CERN-PS. The results of these tests and conclusions about the construction of more stable SEC's are presented

Parking regulations on the CERN sites

CERN Multimedia

General Infrastructure Services Department

2010-01-01

The site surveillance service is also responsible for supervising compliance with the parking regulations on the CERN site. In that context, it ensures that the following rules are complied with on the CERN car park: Vehicles may not be left on a CERN car park for longer than 5 consecutive working days. However, CERN users are entitled to leave their vehicles parked at CERN for a longer period in the car park near Building 588 , subject to completing the application form "Demande d'autorisation pour un stationnement de longue durée" (application for a long-term parking permit) and sending it to the Reception and Access Control Service (access.surveillance@cern.ch) prior to departure.   Parking spaces, which are in short supply in many crowded areas of the CERN site, must not be occupied by abandoned vehicles/wrecks. The service organizes the disposal of such vehicles. Any CERN users wishing to get rid of a private vehicle parked on one of the CERN car pa...

"10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN"

CERN Multimedia

FI Department

2008-01-01

On January 29-30, 2008 On 29 and 30 January 2008, the German Federal Ministry of Education and Research (BMBF) will join forces with CERN in organizing the "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN". The Industrial Exhibition provides the opportunity for some 30 German companies to present their products and services to the scientists and buyers of CERN, establish contacts and gather information on future purchasing opportunities. The main subjects will be the following: mechanical engineering, electrical engineering, electronics, civil engineering and buildings, data processing, radiation protection and vacuum and low temperature technology. The first ever "Innovation Forum at CERN" - open to all CERN Member States – will bring together under one roof researchers, innovators, and entrepreneurs to understand and discuss CERN’s applied technology. They will learn about the know-how accumulated through the LHC, the five detectors ...

"10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN"

CERN Multimedia

FI Department

2008-01-01

29-30 January 2008 On 29 and 30 January 2008, the German Federal Ministry of Education and Research (BMBF) will join forces with CERN in organizing the "10th Germany at CERN" Industrial Exhibition and the first "Innovation Forum at CERN". The Industrial Exhibition will provide the opportunity for some 30 German companies to present their products and services to the scientists and buyers of CERN, establish contacts and gather information on future purchasing opportunities. The main subjects will be the following: mechanical engineering, electrical engineering, electronics, civil engineering and buildings, data processing, radiation protection and vacuum and low temperature technology. The first ever "Innovation Forum at CERN" - open to all CERN Member States - will bring together under one roof researchers, innovators, and entrepreneurs to understand and discuss CERN’s applied technology. They will learn about the know-how accumulated through the LHC, the five detectors ...

Relativistic Turbulence with Strong Synchrotron and Synchrotron-Self-Compton Cooling

Science.gov (United States)

Uzdensky, D. A.

2018-03-01

Many relativistic plasma environments in high-energy astrophysics, including pulsar wind nebulae, hot accretion flows onto black holes, relativistic jets in active galactic nuclei and gamma-ray bursts, and giant radio lobes, are naturally turbulent. The plasma in these environments is often so hot that synchrotron and inverse-Compton (IC) radiative cooling becomes important. In this paper we investigate the general thermodynamic and radiative properties (and hence the observational appearance) of an optically thin relativistically hot plasma stirred by driven magnetohydrodynamic (MHD) turbulence and cooled by radiation. We find that if the system reaches a statistical equilibrium where turbulent heating is balanced by radiative cooling, the effective electron temperature tends to attain a universal value θ = kT_e/m_e c^2 ˜ 1/√{τ_T}, where τT = neσTL ≪ 1 is the system's Thomson optical depth, essentially independent of the strength of turbulent driving and hence of the magnetic field. This is because both MHD turbulent dissipation and synchrotron cooling are proportional to the magnetic energy density. We also find that synchrotron self-Compton (SSC) cooling and perhaps a few higher-order IC components are automatically comparable to synchrotron in this regime. The overall broadband radiation spectrum then consists of several distinct components (synchrotron, SSC, etc.), well separated in photon energy (by a factor ˜ τ_T^{-1}) and roughly equal in power. The number of IC peaks is checked by Klein-Nishina effects and depends logarithmically on τT and the magnetic field. We also examine the limitations due to synchrotron self-absorption, explore applications to Crab PWN and blazar jets, and discuss links to radiative magnetic reconnection.

In the CERN Library

CERN Multimedia

CERN PhotoLab

1963-01-01

Seen in this picture is Noria Christophoridou, librarian of the Greek Atomic Energy Commission, who has been sent by her government to CERN for a year to widen her experience of library and documentation services. In the photograph she is providing information to Kurt Gottfried, a CERN visiting scientist from Harvard University, who is spending a year with CERN's Theory Division

Become a CERN WhiteHat

CERN Multimedia

CERN. Geneva

2014-01-01

Discovering CERN's weaknesses is as important as ever. Become a CERN WhiteHat and help us poking around CERN computing services and web applications. All you need is to apply and get the appropriate training...

Rf beam control for the AGS Booster

International Nuclear Information System (INIS)

Brennan, J.M.

1994-01-01

RF beam control systems for hadron synchrotrons have evolved over the past three decades into an essentially standard design. The key difference between hadron and lepton machines is the absence of radiation damping and existence of significant frequency variation in the case of hadrons. Although the motion of the hadron in the potential well of the rf wave is inherently stable it is not strongly damped. Damping must be provided by electronic feedback through the accelerating system. This feedback is typically called the phase loop. The technology of the rf beam control system for the AGS Booster synchrotron is described. First, the overall philosophy of the design is explained in terms of a conventional servo system that regulates the beam horizontal position in the vacuum chamber. The concept of beam transfer functions is fundamental to the mathematics of the design process and is reviewed. The beam transfer functions required for this design are derived from first principles. An overview of the beam signal pick-ups and high level rf equipment is given. The major subsystems, the frequency program, the heterodyne system, and beam feedback loops, are described in detail. Beyond accelerating the beam, the rf system must also synchronize the bunches in the Booster to the buckets in the AGS before transfer. The technical challenge in this process is heightened by the need to accomplish synchronization while the frequency is still changing. Details of the synchronization system are given. This report is intended to serve two purposes. One is to document the hardware and performance of the systems that have been built. The other is to serve as a tutorial vehicle from which the non-expert can not only learn the details of this system but also learn the principles of beam control that have led to the particular design choices made

Rf beam control for the AGS Booster

Energy Technology Data Exchange (ETDEWEB)

Brennan, J.M.

1994-09-26

RF beam control systems for hadron synchrotrons have evolved over the past three decades into an essentially standard design. The key difference between hadron and lepton machines is the absence of radiation damping and existence of significant frequency variation in the case of hadrons. Although the motion of the hadron in the potential well of the rf wave is inherently stable it is not strongly damped. Damping must be provided by electronic feedback through the accelerating system. This feedback is typically called the phase loop. The technology of the rf beam control system for the AGS Booster synchrotron is described. First, the overall philosophy of the design is explained in terms of a conventional servo system that regulates the beam horizontal position in the vacuum chamber. The concept of beam transfer functions is fundamental to the mathematics of the design process and is reviewed. The beam transfer functions required for this design are derived from first principles. An overview of the beam signal pick-ups and high level rf equipment is given. The major subsystems, the frequency program, the heterodyne system, and beam feedback loops, are described in detail. Beyond accelerating the beam, the rf system must also synchronize the bunches in the Booster to the buckets in the AGS before transfer. The technical challenge in this process is heightened by the need to accomplish synchronization while the frequency is still changing. Details of the synchronization system are given. This report is intended to serve two purposes. One is to document the hardware and performance of the systems that have been built. The other is to serve as a tutorial vehicle from which the non-expert can not only learn the details of this system but also learn the principles of beam control that have led to the particular design choices made.

Error analysis of acceleration control loops of a synchrotron

International Nuclear Information System (INIS)

Zhang, S.Y.; Weng, W.T.

1991-01-01

For beam control during acceleration, it is conventional to derive the frequency from an external reference, be it a field marker or an external oscillator, to provide phase and radius feedback loops to ensure the phase stability, radial position and emittance integrity of the beam. The open and closed loop behaviors of both feedback control and their response under the possible frequency, phase and radius errors are derived from fundamental principles and equations. The stability of the loops is investigated under a wide range of variations of the gain and time delays. Actual system performance of the AGS Booster is analyzed and compared to commissioning experiences. Such analysis is useful for setting design criteria and tolerances for new proton synchrotrons. 4 refs., 13 figs

Experience with workstations for accelerator control at the CERN SPS

International Nuclear Information System (INIS)

Ogle, A.; Ulander, J.; Wilkie, I.

1990-01-01

The CERN super proton synchrotron (SPS) control system is currently undergoing a major long-term upgrade. This paper reviews progress on the high-level application software with particular reference to the operator interface. An important feature of the control-system upgrade is the move from consoles with a number of fixed screens and limited multitasking ability to workstations with the potential to display a large number of windows and perform a number of independent tasks simultaneously. This workstation environment thus permits the operator to run tasks in one machine for which he previously had to monopolize two or even three old consoles. However, the environment also allows the operator to cover the screen with a multitude of windows, leading to complete confusion. Initial requests to present some form of 'global status' of the console proved to be naive, and several iterations were necessary before the operators were satisfied. (orig.)

Iran approaches CERN

CERN Multimedia

2002-01-01

Members of Parliament from the Islamic Republic of Iran visit SM18. From left to right : Ali Mojtahed-Shabestari, Deputy Ambassador of the Islamic Republic of Iran in Geneva, Diether Blechschmidt, from CERN, Abdol-Rahim Baharvand and Hossain Amiri, from the Iranian Parliament, Norbert Siegel, from CERN, Hossain Afarideh, Rasool Seddighi and Ahmad Shirzad from the Iranian Parliament. Five members of the Parliament of the Islamic Republic of Iran visited CERN for three days at the beginning of May. All of them have PhD's in Physics, as well as holding their job in politics. They are involved in legislation for science, research and education funding in Iran. Apart from their interest in CERN in general, they were especially attracted to the CMS detector, since an Iranian contribution to the LHC is now starting through a collaboration with the Institute for Studies in Theoretical Physics and Mathematics in Tehran.

CERN: SC-33

Energy Technology Data Exchange (ETDEWEB)

Anon.

1991-06-15

On 22 April a forward-looking CERN also looked back for a day, when the 'SC-33' event reviewed the achievements of CERN's first machine, the 600 MeV SynchroCyclotron (SC), which closed down on 17 December after 33 years of valiant service.

CERN Infrastructure Evolution

CERN Document Server

Bell, Tim

2012-01-01

The CERN Computer Centre is reviewing strategies for optimizing the use of the existing infrastructure in the future, and in the likely scenario that any extension will be remote from CERN, and in the light of the way other large facilities are today being operated. Over the past six months, CERN has been investigating modern and widely-used tools and procedures used for virtualisation, clouds and fabric management in order to reduce operational effort, increase agility and support unattended remote computer centres. This presentation will give the details on the project’s motivations, current status and areas for future investigation.

CERN and Portugal

International Nuclear Information System (INIS)

Anon.

1995-01-01

In its continual tour of CERN Member States, the European Committee for Future Accelerators (ECFA) visited Lisbon, Portugal, on 21-22 April, where it met at the Instituto Superiore Tecnico, a technical university with 9,000 students. Portuguese particle physics is in a particularly healthy situation, having developed considerably following Portugal's admission to CERN in 1985. With support from Brussels, scientific infrastructure has developed rapidly, although the science base has yet to attain the levels seen in larger nations. The 45-strong population of experimentalists in Portugal, including 14 PhDs, represents a 2.5-fold increase since Portugal joined CERN ten years ago and is in line with the goal stated at the time. This successful development of experimental particle physics has benefited much from physicists returning from abroad (mainly France and the UK). The direct result of the efforts of a few individuals (notably J.M. Gago), this splendid achievement provides an excellent role model for new and potential CERN Member States. At present, particle physics represents some 3 0% of all Portuguese physics publications. This very special role (and the financial support it implies) provides a visible target, but one which can be defended as it provides a catalyst for other national scientific developments. The national hub is the Laboratory for experimental high energy physics and related R&D projects (LIP), with centres in Lisbon (Head, J.M. Gago) and Coimbra (Head, A. Policarpo). LIP, with close links to two universities in Lisbon and to the University of Coimbra, has developed into a centre of expertise and training in electronics, computing and software engineering. Present LIP funding is some 2 million Swiss francs/year (70% in Lisbon and 3 0% in Coimbra), covering most of the salaries of the nonuniversity people, the remainder being supported by grants from Portuguese and European programmes. Portugal's contribution to CERN's 1995 budget

CERN and Israel

International Nuclear Information System (INIS)

Anon.

1995-01-01

Israel (along with the US, Japan, Canada, the Russian Federation and India) is one of the CERN non- Member State nations targeted for substantial future participation in CERN's experimental programme, in particular for the LHC proton collider to be built in the 27-kilometre LEP tunnel and which was formally approved by CERN Council in December (January/February, page 1). In keeping with their illustrious scientific traditions, Israeli experimental physicists have collaborated in experiments at many of the world's major high energy Laboratories - Brookhaven, Fermilab and SLAC in the US, and in Europe, DESY, Hamburg, as well as CERN. However CERN, as the geographically closest major Laboratory (as well as the largest), plays a special role for Israeli scientists. At CERN, the advent of preparations in the early 1980s for the experimental programme at the LEP electron-positron collider was the signal for Israeli researchers to mount a concerted effort and contribute to one of the experiments - Opal - at a level comparable to that of major nations. This allowed Israeli teams to participate fully in the planning and construction phase of this branch of Big Science. Underlining this commitment, and to coordinate the various national agencies involved in this aspect of Big Science, in 1983 the Israel Commission for High Energy Physics (ICHEP) was formed. It is currently chaired by David Horn of Tel Aviv. The initial ICHEP/CERN contract established the official CERN/lsrael link under which, in the short-term, teams from three major research centres - the Weizmann Institute, Tel- Aviv University, and Haifa's Technion - contributed to Opal, as the flagship experiment, while providing a framework for longer-term collaboration. (At CERN, Israeli physicists also participate in the NA45 heavy ion experiment and the NA47 Spin Muon Collaboration - SMC.) Opal groups some 320 scientists from 32 research centres in eight countries, and includes a 21-strong Israeli

Synchrotron radiation from protons

International Nuclear Information System (INIS)

Dutt, S.K.

1992-12-01

Synchrotron radiation from protons, though described by the same equations as the radiation from electrons, exhibits a number of interesting features on account of the parameters reached in praxis. In this presentation, we shall point out some of the features relating to (i) normal synchrotron radiation from dipoles in proton machines such as the High Energy Booster and the Superconducting Super Collider; (ii) synchrotron radiation from short dipoles, and its application to light monitors for proton machines, and (iii) synchrotron radiation from undulators in the limit when, the deflection parameter is much smaller than unity. The material for this presentation is taken largely from the work of Hofmann, Coisson, Bossart, and their collaborators, and from a paper by Kim. We shall emphasize the qualitative aspects of synchrotron radiation in the cases mentioned above, making, when possible, simple arguments for estimating the spectral and angular properties of the radiation. Detailed analyses can be found in the literature

Future Synchrotron Radiation Sources

CERN Document Server

Winick, Herman

2003-01-01

Sources of synchrotron radiation (also called synchrotron light) and their associated research facilities have experienced a spectacular growth in number, performance, and breadth of application in the past two to three decades. In 1978 there were eleven electron storage rings used as light sources. Three of these were small rings, all below 500 mega-electron volts (MeV), dedicated to this purpose; the others, with energy up to 5 giga-electron volts (GeV), were used parasitically during the operation of the ring for high energy physics research. In addition, at that time synchrotron radiation from nine cyclic electron synchrotrons, with energy up to 5 GeV, was also used parasitically. At present no cyclic synchrotrons are used, while about 50 electron storage rings are in operation around the world as fully dedicated light sources for basic and applied research in a wide variety of fields. Among these fields are structural molecular biology, molecular environmental science, materials, analytic chemistry, micr...

Comparison of the luminescent properties of Lu3Al5O12:Pr crystals and films under synchrotron radiation excitation

International Nuclear Information System (INIS)

Zorenko, Yu.; Gorbenko, V.; Zorenko, T.; Voznyak, T.; Nizankovskiy, S.

2016-01-01

The work is dedicated to comparative investigation of the luminescent properties of Lu 3 Al 5 O 12 :Pr(LuAG:Pr) single crystals and single crystalline films using excitation by synchrotron radiation with an energy of 3.7–25 eV in the exciton range of LuAG host. We have found that the differences in the excitation spectra and luminescence decay kinetics of LuAG:Pr crystals and films are caused by involving the LuAl antisite defects and oxygen vacancies in the crystals and Pb 2+ flux related dopants in the films in the excitation processes of the Pr 3+ luminescence. Taking into account these differences, we have determined the energy structure of the Pr 3+ ions in LuAG host and estimated the differences in the energies of creation of excitons bound with the isolated Pr 3+ ions in LuAG:Pr films and the dipole Pr–LuAl antisite defect centers in the crystal counterpart. - Highlights: • Comparison of the luminescent properties of LuAG:Pr single crystals and films. • Superposition of the Pr 3+ and defect centers luminescence of LuAG:Pr crystal. • Different creation energies of an excitons bound with the Pr 3+ in LuAG:Pr crystals and films. • More faster decay kinetics of the Pr 3+ luminescence in LuAG:Pr films. • Low content of slow emission component in LuAG:Pr films.

People and things. CERN Courier, November 1981, v. 21(9)

International Nuclear Information System (INIS)

Anon.

1981-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. At the end of August a circulating electron beam was achieved for the first time in the VUV (vacuum ultraviolet) ring of the US National Synchrotron Light Source at Brookhaven. Commissioning of the X-ray ring of the NSLS is imminent. From 11-14 January, an International Colloquium on Baryon Nonconservation (ICOBAN) will be held at the Tata Institute of Fundamental Research, Bombay.From 17-23 February an International Conference on Instrumentation for Colliding Beam Physics will be held at the Stanford Linear Accelerator Center. A Europhysics Conference on 'Computing in Accelerator Design and Operation' will be held in Warsaw from 21-24 September 1982. A team at Los Alamos, led by Charles Brau, has demonstrated the principle of a high efficiency free electron laser. Work has started on a prototype magnet to confirm the design of a 2 GeV electron microtron under study at Argonne for use in nuclear and particle physics research. On 2 October a new ion source and injector system, known as ABEL, was inaugurated at Berkeley. The X-ray synchrotron radiation produced by electron storage rings could provide improved diagnosis in conditions such as coronary artery disease. Fermilab is proposing to set up an on-site Latin America Center for Fundamental Physics and Technology to assist scientists and engineers from developing countries

Lectures for CERN pensioners

CERN Multimedia

SC Unit

2008-01-01

The CERN Medical Service and the Pensioners Association are pleased to invite CERN pensioners to a series of lectures given by professors and specialists from the Teaching Hospitals and the Faculty of Medicine of the University of Geneva on the following topic: PROMOTION OF OPTIMUM BRAIN AGEING The lectures will take place in the Main CERN Auditorium (Building 60) from 2.30 p.m. to 4.30 p.m. on the following dates: Wednesday 12 November 2008: Assessing the extent of brain ageing Dr Dina ZEKRY Friday 12 December 2008: Can memory decline be prevented? Pr Jean-Pierre MICHEL Thursday 15 January 2009: Diagnosing and treating Alzheimer’s disease Pr Gabriel GOLD Wednesday 25 February 2009: What is the brain reserve? Speaker’s name to be announced at a later date The lectures will be given in French, with transparencies in English, and will be followed by a wide-ranging debate with the participants. CERN Medical Service - Pensioners Association - CERN-ESO (GAC-EPA)

Romanian President Visits CERN

CERN Multimedia

2001-01-01

Director General Luciano Maiani watches as Romanian President Ion Iliescu signs the CERN guest book. On Friday the 12th of October, Romanian President Ion Iliescu arrived at CERN and was warmly greeted by Director General Luciano Maiani at the steps of building 500. After initial greetings and a general presentation of the laboratory, President Iliescu and his entourage embarked on a whistle stop tour of the CERN facilities. They visited the CMS magnet assembly hall and civil engineering work where presentations were made by CMS spokesperson Michel Della Negra and the ATLAS Tile Calorimeter where the president was introduced to Romanian physicists working here at CERN. Michel Della Negra explains some of the general principles behind CMS to President Iliescu during his visit last week. The Romanian teams working on CERN projects make very visible contributions, for example to the construction of the ATLAS experiment and to the preparation of its eventual scientific exploitation. 'Those of us on the ATLAS ...

EU Commissioner visits CERN

CERN Multimedia

2005-01-01

European Commissioner Viviane Reding in front of one of the computers showing how the Grid works and, from left to right, Robert Aymar, CERN's Director-General, Wolfgang von Rüden, Head of the Information Technology Department, and Bob Jones, the newly appointed director of the EGEE project since 1st November. Viviane Reding, European Commissioner for Information Society and Media, visited CERN on 28 October. Accompanied throughout by CERN's Director-General, Robert Aymar, and the Head of the Information Technology Department, Wolfgang von Rüden, the Commissioner visited the ATLAS cavern before going on to the Information Technology Department, where she was given a complete overview of CERN's activities in the strategic field of Grid computing. Viviane Reding's visit coincided with the end of the EGEE (Enabling Grids for E-sciencE) conference, which took place in Pisa in Italy. Co-ordinated by CERN and funded by the European Commission, the EGEE project aims to set up a worldwide grid infrastructure for sc...

Spaceflight participant visits CERN!

CERN Multimedia

Kathryn Coldham

2016-01-01

On 15 July, CERN welcomed spaceflight participant Anousheh Ansari.   Anousheh Ansari’s grin stretches from ear to ear, during an intriguing conversation with Nobel laureate Samuel C.C. Ting at AMS POCC. (Image: Maximilien Brice/CERN) Iranian-American Anousheh Ansari was the first-ever female spaceflight participant, spending eight days on the International Space Station (ISS) in 2006. She now has a new addition to her list of extraordinary sights ­– the home of the world’s largest particle accelerator: CERN.   On 15 July, Anousheh Ansari came to CERN and, unsurprisingly, visited the control room of the experiment attached to the ISS: the AMS. At the AMS Payload Operations Control Centre (AMS POCC) on CERN’s Prévessin site, she met the Nobel laureate Samuel Ting, spokesperson of the AMS experiment. Ansari and her accompanying guests were thrilled to expand their knowledge about CERN, its research and its...

Punctualizaciones del CERN

CERN Multimedia

2002-01-01

"Viene de la pagina anterior. Puntualizaciones del CERN. La valoracion que me merece la aprobacion en el Consejo de Ministros el 24 de mayo de un acuerdo de colaboracion entre el MCYT y el CERN para el proyecto de neutrinos al Gran Sasso es positiva" (1 page).

Controlled longitudinal emittance blow-up using band-limited phase noise in CERN PSB

Science.gov (United States)

Quartullo, D.; Shaposhnikova, E.; Timko, H.

2017-07-01

Controlled longitudinal emittance blow-up (from 1 eVs to 1.4 eVs) for LHC beams in the CERN PS Booster is currently achievied using sinusoidal phase modulation of a dedicated high-harmonic RF system. In 2021, after the LHC injectors upgrade, 3 eVs should be extracted to the PS. Even if the current method may satisfy the new requirements, it relies on low-power level RF improvements. In this paper another method of blow-up was considered, that is the injection of band-limited phase noise in the main RF system (h=1), never tried in PSB but already used in CERN SPS and LHC, under different conditions (longer cycles). This technique, which lowers the peak line density and therefore the impact of intensity effects in the PSB and the PS, can also be complementary to the present method. The longitudinal space charge, dominant in the PSB, causes significant synchrotron frequency shifts with intensity, and its effect should be taken into account. Another complication arises from the interaction of the phase loop with the injected noise, since both act on the RF phase. All these elements were studied in simulations of the PSB cycle with the BLonD code, and the required blow-up was achieved.

The CERN PC farm

CERN Multimedia

Serge Bellegarde

2005-01-01

Housed in the CERN Computer Centre, these banks of computers process and store data produced on the CERN systems. When the LHC starts operation in 2008, it will produce enough data every year to fill a stack of CDs 20 km tall. To handle this huge amount of data, CERN has also developed the Grid, allowing the processing power to be shared between computer centres around the world.

Coronary angiography using synchrotron radiation

International Nuclear Information System (INIS)

Akatsuka, Takao; Hiranaka, Yukio; Takeda, Tohru; Hyodo, Kazuyuki.

1990-01-01

Invasive coronary angiography is the imaging technique of choice for diagnosis of ischemic heart disease. Recently, the application of synchrotron radiation in coronary angiography has been investigated in the world, with the aim of developing the noninvasive technique for visualizing the heart. In this article, backgrounds and present situation of coronary angiography using synchrotron radiation are reviewed. Firstly, visual imaging techniques of the cardiovascular system are discussed in terms of angiography and digital subtraction angiography (DSA). Conventional temporal, energy, and hybrid subtraction modes used in DSA are referred to. Secondly, the application of synchrotron radiation is presented, focusing on the property of synchrotron radiation and K-edge subtraction angiography. Two kinds of synchrotron radiation beam methods are outlined. Interpretation of image data and various subtraction procedures remain unestablished. There is much to be done before coronary angiography using synchrotron radiation comes into a clinical practice. (N.K.)

CERN meets Facebook

CERN Multimedia

2012-01-01

Social networking sites like LinkedIn, MySpace, Google+ and Facebook are on the rise. In particular, the life of youngsters revolves more and more around these sites as they facilitate communication, networking and the exchange of niceties. Who does not today already have an account registered with one of them? A Facebook profile can contain photos, listings of hobbies, job information, preferences…   The on-going effort to externalise some of CERN's computing resources continues, and in order to promote a unified interface for personal information, CERN has decided to establish a partnership with Facebook starting on 1stApril. "CERN is a public and trustworthy international organisation, and as such, our staff and users have nothing to hide from the general public," said Alexi Spiner (IT), project leader responsible for this migration: * The computer profiles of all CERN users will be integrated into the Facebook portal; * In addition, we will also ...

Safety at CERN

CERN Document Server

2009-01-01

Safety is an integral part of our working lives, and should be in our minds whatever job we do at CERN. Ultimately, safety is the responsibility of the Director General – your safety is my concern. That’s why I have this week appointed a new Safety Policy Committee (SAPOCO) that reflects the new Organizational structure of CERN. CERN’s Staff Rules and Regulations clearly lay out in chapter 3 the scope of safety at CERN as well as my responsibilities and yours in safety matters. At CERN, safety is considered in the broadest sense, encompassing occupational Health and Safety, environmental protection, and the safety of equipment and installations. It is my responsibility to put appropriate measures in place to ensure that these conditions are met. And it is the responsibility of us all to ensure that we are fully conversant with safety provisions applicable in our areas of work and that we comply with them. The appointment of a n...

DESY greets CERN

CERN Multimedia

Helmut Dosch, Chairman of the DESY Board of Directors, continues the series of occasional exchanges between CERN and other laboratories world-wide. As part of this exchange, CERN Director-General Rolf Heuer wrote a message in DESY inForm. Helmut Dosch took over from Albrecht Wagner in March 2009. You may think that the connections between CERN and DESY are obvious – particle physics labs with record-breaking accelerators and users from all around the world trying to solve mankind’s great mysteries. We even exchanged a few Directors. But did you know that there are similarities that are much closer to home – for example that both labs have names for their staff in the host language that are untranslatable into English? You are CERNoises and CERNois, we are DESYanerinnen and DESYaner. And in the end it’s the people it all comes down to. We at DESY admire the resourcefulness, enthusiasm, dedication and perseverance with which you at CERN have designed, built, started ...

CERN stationery rejuvenated

CERN Multimedia

Anaïs Schaeffer

2013-01-01

With the introduction of CERN’s new graphic charter, our complete range of official communications stationery has been redesigned. Discover the newly harmonised and standardised range of CERN stationery.   As the Director-General announced in Bulletin 41-42/2012, a new graphic charter is now in force at CERN. The graphics team has taken this opportunity to redesign all the official CERN stationery, such as business cards, correspondence cards, letterheads, envelopes and file holders, all of which will now boast the same, unified format. In keeping with CERN’s new graphic charter, even the business cards have had a makeover: of a better quality than their predecessors, they now elegantly display the CERN colours (namely the familiar Pantone 286 blue). These new cards, which all follow a standardised format, help to project a standardised corporate image of the Organization. Order them online now! As the Director-General highlighted, “it's increasingly imp...

Cern Golf Club

CERN Document Server

Cern Golf Club

2014-01-01

  The Cern Golf Club   Members are here with invited to the: Annual General Meeting which takes place Wednesday evening the 5th February 2014 at 18h00 in the Conference room in bldg 13-2-005. A committee member will be at CERN gate B, 17h50 and accompany “external” CGC members to the conference room. Agenda: 1. President’s report 2. Treasurer’s report 3. Election of the Committee for 2014 4. Election of  Auditors 5. Draft schedule for 2014 CGC-competitions and other events 6. “Corpo” report    7. Proposals and any other business Please forward any proposals (to any of the committee members) you have, including candidature for the 2014 committee minimum three days in advance before the meeting.      Cern Golf Club   Les membres de club de golf de CERN sont invités à l’Assemblée Géné...

Synchrotron radiation research

International Nuclear Information System (INIS)

Markus, N.

1995-01-01

In the many varied application fields of accelerators, synchrotron radiation ranks as one of the most valuable and widely useful tools. Synchrotron radiation is produced in multi-GeV electron synchrotrons and storage rings, and emerges tangentially in a narrow vertical fan. Synchrotron radiation has been used extensively for basic studies and, more recently, for applied research in the chemical, materials, biotechnology and pharmaceutical industries. Initially, the radiation was a byproduct of high energy physics laboratories but the high demand soon resulted in the construction of dedicated electron storage rings. The accelerator technology is now well developed and a large number of sources have been constructed, with energies ranging from about 1.5 to 8 GeV including the 6 GeV European Synchrotron Radiation Facility (ESRF) source at Grenoble, France. A modern third-generation synchrotron radiation source has an electron storage ring with a complex magnet lattice to produce ultra-low emittance beams, long straights for 'insertion devices', and 'undulator' or 'wiggler' magnets to generate radiation with particular properties. Large beam currents are necessary to give high radiation fluxes and long beam lifetimes require ultra high vacuum systems. Industrial synchrotron radiation research programmes use either Xray diffraction or spectroscopy to determine the structures of a wide range of materials. Biological and pharmaceutical applications study the functions of various proteins. With this knowledge, it is possible to design molecules to change protein behaviour for pharmaceuticals, or to configure more active proteins, such as enzymes, for industrial processes. Recent advances in molecular biology have resulted in a large increase in protein crystallography studies, with researchers using crystals which, although small and weakly diffracting, benefit from the high intensity. Examples with commercial significance include the study of

Italy's Prime Minister visits CERN

CERN Multimedia

Stefania Pandolfi

2015-01-01

On Tuesday, 7 July 2015, the Prime Minister of the Italian Republic, Matteo Renzi, visited CERN. He was accompanied by a delegation that included Italy's Minister for Education, University and Research, Stefania Giannini.   From left to right: Fernando Ferroni, President of the Istituto Nazionale di Fisica Nucleare (INFN); Sergio Bertolucci, CERN Director for Research and Scientific Computing; Stefania Giannini, Italy's Minister of Education, University and Research; Matteo Renzi, Prime Minister of the Italian Republic; Fabiola Gianotti, CERN Director-General Designate; Rolf Heuer, CERN Director-General.   The Prime Minister was welcomed by members of the CERN Management together with former CERN Director-General and Senator for Life of the Italian Republic, Carlo Rubbia. After a brief general introduction to CERN’s activities by Rolf Heuer, the Italian delegation visited LHC Point 1. After a tour of the ATLAS control room, they donned helmets to visit th...

CERN openlab Summer Student Programme

CERN Multimedia

2012-01-01

CERN openlab is currently taking applications for its summer student programme. The closing date for applications is 30 March 2012.   The openlab Summer Student Programme is open for applications from bachelor, master and PhD students in computer science and physics. Successful applicants will spend 8 weeks at CERN, during the period June to September 2012, to work with some of the latest hardware and software technologies. The programme is more than just a summer at CERN: it can lead to follow-on projects at the home institute and may even inspire the students to become entrepreneurs in cutting-edge computing technologies. A series of lectures will be given by experts in various domains of CERN related high-throughput computing. Study tours to external companies and universities as well as to CERN facilities are also part of the programme. Please visit www.cern.ch/openlab-students for more information.

CERN openlab summer student programme

CERN Multimedia

2013-01-01

CERN openlab is currently taking applications for its summer student programme. The closing date for applications is 31 March 2013.   The openlab summer student programme is open for applications from bachelor, master and PhD students in computer science and physics. Successful applicants will spend 9 weeks at CERN, during the period from June to September 2013, working with some of the latest hardware and software technologies. The programme is more than just a summer at CERN: it can lead to follow-on projects at the home institute and may even inspire students to become entrepreneurs in cutting-edge computing technologies. A series of lectures will be given by experts in various domains of CERN-related high-throughput computing. Study tours of external companies and universities as well as of CERN facilities are also part of the programme. Please visit the CERN openlab website for more information.

Uses of synchrotron radiation

International Nuclear Information System (INIS)

Gordon, B.M.

1982-01-01

X-ray fluorescence has long been used as a technique for elemental analysis. X-ray fluorescence techniques have a number of features that make them attractive for application to biomedical samples. In the past few years synchrotron radiation x-ray sources have been developed and, because of their properties, their use can improve the sensitivity for trace element analysis by two to three orders of magnitude. Also, synchrotron radiation will make possible an x-ray microprobe with resolution in the micrometer range. The National Synchrotron Light Source (NSLS), a dedicated synchrotron radiation source recently built at Brookhaven National Laboratory, will have a facility for trace element analysis by x-ray fluorescence and will be available to all interested users

Synchrotron radiation

International Nuclear Information System (INIS)

Norman, D.; Walker, R.P.; Durham, P.J.; Ridley, P.A.

1986-01-01

The paper on synchrotron radiation is the appendix to the Daresbury (United Kingdom) annual report, 1985/86. The bulk of the volume is made up of the progress reports for the work carried out during the year under review using the Synchrotron Radiation Source (SRS) at Daresbury. The Appendix also contains: the scientific programmes at the the SRS, progress on beamlines, instrumentation and computing developments, and activities connected with accelerator development. (U.K.)

CERN HEALTH INSURANCE SCHEME (CHIS)

CERN Multimedia

HR Department

2002-01-01

List of benefits for 2002 The CHIS list of benefits for 2002 is now available from the HR Division Website (under 'general information'). We wish to draw your attention to the fact that the copies of this list available at the CERN UNIQA Office are intended ONLY for CERN pensioners. CERN staff members are therefore kindly requested to print this list themselves from the Web. English version HERE We would like to take this opportunity to remind staff members that they should obtain medical expenses claim forms from their divisional secretariat and NOT from the CERN UNIQA Office, which has a limited supply intended for CERN pensioners ONLY. Human Resources Division Tel: 73635

A Review on ϕ Meson Production in Heavy-Ion Collision

Directory of Open Access Journals (Sweden)

Md. Nasim

2015-01-01

Full Text Available The main aim of the relativistic heavy-ion experiment is to create extremely hot and dense matter and study the QCD phase structure. With this motivation, experimental program started in the early 1990s at the Brookhaven Alternating Gradient Synchrotron (AGS and the CERN Super Proton Synchrotron (SPS followed by Relativistic Heavy Ion Collider (RHIC at Brookhaven and recently at Large Hadron Collider (LHC at CERN. These experiments allowed us to study the QCD matter from center-of-mass energies (sNN 4.75 GeV to 2.76 TeV. The ϕ meson, due to its unique properties, is considered as a good probe to study the QCD matter created in relativistic collisions. In this paper we present a review on the measurements of ϕ meson production in heavy-ion experiments. Mainly, we discuss the energy dependence of ϕ meson invariant yield and the production mechanism, strangeness enhancement, parton energy loss, and partonic collectivity in nucleus-nucleus collisions. Effect of later stage hadronic rescattering on elliptic flow (v2 of proton is also discussed relative to corresponding effect on ϕ meson v2.

CERN: SC-33

International Nuclear Information System (INIS)

Anon.

1991-01-01

On 22 April a forward-looking CERN also looked back for a day, when the 'SC-33' event reviewed the achievements of CERN's first machine, the 600 MeV SynchroCyclotron (SC), which closed down on 17 December after 33 years of valiant service

The Proton Synchrotron, going strong at fifty years

CERN Multimedia

Django Manglunki

It was on the evening of 24 November 1959 that an incredulous Hildred Blewett, on detachment to CERN from the Brookhaven laboratory, exclaimed “Yes! We’re through transition!” The first beam of ten billion protons had not only broken through the 5.2 GeV barrier but gone on all the way to 24 GeV, the machine’s top energy at that time.   An operational screenshot from the PS, taken on its 50th anniversary. The three white peaks depict different phases (cycles) of the PS’s operation. In the first and third cycle, the PS is producing a very low-intensity beam for LHC commissioning. In the second cycle, protons are being spilled out for use in the East Area. Fifty years ago the PS, the first strong-focusing proton synchrotron using alternating gradient technology, first began to circulate beams at an unprecedented level of energy. Over the years, a complex of linear and circular accelerators and storage rings grew up around the PS. In the mid-1990s ...

VME Switch for CERN's PS Analog Video System

CERN Document Server

Acebes, I; Heinze, W; Lewis, J; Serrano, J

2003-01-01

Analog video signal switching is used in CERN's Proton Synchrotron (PS) complex to route the video signals coming from Beam Diagnostics systems to the Meyrin Control Room (MCR). Traditionally, this has been done with custom electromechanical relay-based cards controlled serially via CAMAC crates. In order to improve the robustness and maintainability of the system, while keeping it analog to preserve the low latency, a VME card based on Analog Devices' AD8116 analog matrix chip has been developed. Video signals go into the front panel and exit the switch through the P2 connector of the VME backplane. The module is a 16 input, 32 output matrix. Larger matrices can be built using more modules and bussing their outputs together, thanks to the high impedance feature of the AD8116. Another VME module takes the selected signals from the P2 connector and performs automatic gain to send them at nominal output level through its front panel. This paper discusses both designs and presents experimental test results.

Follow-up research at CERN

International Nuclear Information System (INIS)

1993-01-01

At The European Center for High Energy Physics (Conseil Europeen de Recherche Nucleaire - CERN) basic research is carried out based on some of the world's largest particle accelerators, especially the Large Electron Positron collider (LEP). Danish membership of CERN gives Danish physicists access to these machines and the Accelerator Committee offers advice on their utilization and related financing. Danish research carried out at CERN is described, based on contributions from individual research groups. The functions, administration and budgets of the Accelerator Committee are explained in addition to other forms of administration connected with CERN, such as the Danish CERN Delegation, and an evaluation of Danish experimentation within physics is presented. Information is given on individual Danish members of the CERN groups of scientists and a list of the publications of international research groups which include Danish subjects, covering the years 1991-93, is presented. The publication is related to the delegation of grants for research projects carried out by Danish physicists. (AB)

CERN openlab enters fifth phase

CERN Multimedia

Andrew Purcell

2015-01-01

CERN openlab is a unique public-private partnership between CERN and leading ICT companies. At the start of this year, openlab officially entered its fifth phase, which will run until the end of 2017. For the first time in its history, it has extended beyond the CERN community to include other major European and international research laboratories.   Founded in 2001 to develop the innovative ICT systems needed to cope with the unprecedented computing challenges of the LHC, CERN openlab unites science and industry at the cutting edge of research and innovation. In a white paper published last year, CERN openlab set out the main ICT challenges it will tackle during its fifth phase, namely data acquisition, computing platforms, data storage architectures, computer management and provisioning, networks and connectivity, and data analytics. As it enters its fifth phase, CERN openlab is expanding to include other research laboratories. "Today, research centres in other disciplines are also st...

LabVIEW Support at CERN

CERN Multimedia

HR Department

2010-01-01

Since the beginning of 2009, due to the CERN restructuring, LabVIEW support moved from the IT to the EN department, joining the Industrial Controls and Electronics Group (ICE). LabVIEW support has been merged with the Measurement, Test and Analysis (MTA) section which, using LabVIEW, has developed most of the measurement systems to qualify the LHC magnets and components over the past 10 years. The post mortem analysis for the LHC hardware commissioning has also been fully implemented using LabVIEW, customised into a framework, called RADE, for CERN needs. The MTA section has started with a proactive approach sharing its tools and experience with the CERN LabVIEW community. Its framework (RADE) for CERN integrated application development has been made available to the users. Courses on RADE have been integrated into the standard National Instruments training program at CERN. RADE and LabVIEW support were merged together in 2010 on a single email address:labview.support@cern.ch For more information please...

CERN's technical apprentices during their apprenticeships

CERN Multimedia

Adrian Billet

2004-01-01

CERN starting training apprentices in 1966 at the request of the Geneva authorities. The programme was consolidated with the opening of the training centre in 1971. In recent years CERN has taken on seven new technical apprentices each year (four in electronics, three in physics laboratory work), plus one or two administrative apprentices, such that there always are around 30 apprentices in total at CERN. The programme is highly regarded in Geneva by the authorities, industry, schools and young people, and contributes very positively to CERN's local image. Since the beginning 160 young people have now successfully completed their apprenticeships at CERN. Unlike some other employers, as a general rule CERN does not take on its ex-apprentices as staff; on completing their years at CERN the apprentices usually go on to higher education or are sought after by other employers.

Environmental radiation monitoring on the CERN sites and in the CERN environment during 1998

Energy Technology Data Exchange (ETDEWEB)

Vojtyla, P; Wittekind, D

1999-04-15

As a consequence of changes in the administrative structure of TIS Division in 1996 and 1997, the Environmental Section was integrated into the TIS Technical Services and Environment Group that also looks after the non-radiation parameters in the CERN releases and environment. However, it remains the duty of the Radiation Protection Group (RP) to define the environmental programme for radiation and radioactivity, and of the leader of RP to report its results both inside and outside CERN. Part I of this Annual Report describes the results of measurements which are relevant for assessing the radiological impact of CERN's activities on the environment and the population living in the vicinity of the CERN sites. Measurements of radioactivity released into the atmosphere and into water, as well as measurements of stray radiation at or near the CERN site boundaries, are reported.

CERN Library | Mario Campanelli presents "Inside CERN's Large Hadron Collider" | 16 March

CERN Multimedia

CERN Library

2016-01-01

"Inside CERN's Large Hadron Collider" by Mario Campanelli. Presentation on Wednesday, 16 March at 4 p.m. in the Library (bldg 52-1-052) The book aims to explain the historical development of particle physics, with special emphasis on CERN and collider physics. It describes in detail the LHC accelerator and its detectors, describing the science involved as well as the sociology of big collaborations, culminating with the discovery of the Higgs boson.  Inside CERN's Large Hadron Collider  Mario Campanelli World Scientific Publishing, 2015  ISBN 9789814656641​

Quantification of CERN's economic spin-off

International Nuclear Information System (INIS)

Bianchi-Streit, M.; Blackburne, N.; Budde, R.; Reitz, H.; Sagnell, B.; Schorr, B.; Schmied, H.

1986-01-01

A condensed version is given of CERN report ''Economic utility resulting from CERN contracts'' by the same authors, which attempts to quantify the economic benefit to high technology manufacturing industries involved in CERN contracts, in relation to their sales to CERN. It covers the period 1973 to 1987 and complements an earlier study made in 1973-1975. Interviews were carried out in 166 European firms of which the majority supplied estimates of increased sales and cost savings due to CERN contracts. This ''economic utility'' totals 3107 million Swiss francs (up to the year 1987) compared to sales to CERN in 1973 to 1982 amounting to 748 million Swiss francs in 1982 prices. It is estimated that, by 1987, CERN's high technology purchases made in 1973 to 1982 will have generated economic utility amounting to about 60% of the overall cost of the organization during the same period. (author)

Feasibility study for a biomedical experimental facility based on LEIR at CERN

International Nuclear Information System (INIS)

Abler, Daniel; Garonna, Adriano; Carli, Christian; Dosanjh, Manjit; Peach, Ken

2013-01-01

In light of the recent European developments in ion beam therapy, there is a strong interest from the biomedical research community to have more access to clinically relevant beams. Beamtime for pre-clinical studies is currently very limited and a new dedicated facility would allow extensive research into the radiobiological mechanisms of ion beam radiation and the development of more refined techniques of dosimetry and imaging. This basic research would support the current clinical efforts of the new treatment centres in Europe (for example HIT, CNAO and MedAustron). This paper presents first investigations on the feasibility of an experimental biomedical facility based on the CERN Low Energy Ion Ring LEIR accelerator. Such a new facility could provide beams of light ions (from protons to neon ions) in a collaborative and cost-effective way, since it would rely partly on CERN's competences and infrastructure. The main technical challenges linked to the implementation of a slow extraction scheme for LEIR and to the design of the experimental beamlines are described and first solutions presented. These include introducing new extraction septa into one of the straight sections of the synchrotron, changing the power supply configuration of the magnets, and designing a new horizontal beamline suitable for clinical beam energies, and a low-energy vertical beamline for particular radiobiological experiments. (author)

Feasibility study for a biomedical experimental facility based on LEIR at CERN.

Science.gov (United States)

Abler, Daniel; Garonna, Adriano; Carli, Christian; Dosanjh, Manjit; Peach, Ken

2013-07-01

In light of the recent European developments in ion beam therapy, there is a strong interest from the biomedical research community to have more access to clinically relevant beams. Beamtime for pre-clinical studies is currently very limited and a new dedicated facility would allow extensive research into the radiobiological mechanisms of ion beam radiation and the development of more refined techniques of dosimetry and imaging. This basic research would support the current clinical efforts of the new treatment centres in Europe (for example HIT, CNAO and MedAustron). This paper presents first investigations on the feasibility of an experimental biomedical facility based on the CERN Low Energy Ion Ring LEIR accelerator. Such a new facility could provide beams of light ions (from protons to neon ions) in a collaborative and cost-effective way, since it would rely partly on CERN's competences and infrastructure. The main technical challenges linked to the implementation of a slow extraction scheme for LEIR and to the design of the experimental beamlines are described and first solutions presented. These include introducing new extraction septa into one of the straight sections of the synchrotron, changing the power supply configuration of the magnets, and designing a new horizontal beamline suitable for clinical beam energies, and a low-energy vertical beamline for particular radiobiological experiments.

CERN Video News on line

CERN Multimedia

2003-01-01

The latest CERN video news is on line. In this issue : an interview with the Director General and reports on the new home for the DELPHI barrel and the CERN firemen's spectacular training programme. There's also a vintage video news clip from 1954. See: www.cern.ch/video or Bulletin web page

People and things. CERN Courier, May 1982, v. 22(4)

International Nuclear Information System (INIS)

Anon.

1982-01-01

The article reports on achievements of various people, staff changes and position opportunities within the CERN organization and contains news updates on upcoming or past events. The 1982 Summer Workshop on Proton Decay Experiments will be held from 7-11 June at Argonne National Laboratory. Its purpose is to bring together experimenters and theorists with an active interest in the next generation of proton decay experiments. A workshop will be held at Los Alamos from 19-22 July to discuss the LAMPF II project for a rapid cycling 16 GeV synchrotron providing 10 13 protons per pulse. 'The challenge of attaining ultra high energies' - This is the title of a meeting to review limitations and possibilities in particle acceleration to ultra high energies, organized jointly by ECFA and the Rutherford Laboratory. The topics for discussion will include the use of high electric fields generated in plasmas, external fields in short wave r.f. linacs, and laser illuminated gratings

Synchrotron radiation

International Nuclear Information System (INIS)

Poole, M.W.; Lea, K.R.

1982-01-01

A report is given on the work involving the Synchrotron Radiation Division of the Daresbury Laboratory during the period January 1981 - March 1982. Development of the source, beamlines and experimental stations is described. Progress reports from individual investigators are presented which reveal the general diversity and interdisciplinary nature of the research which benefits from access to synchrotron radiation and the associated facilities. Information is given on the organisation of the Division and publications written by the staff are listed. (U.K.)

National Synchrotron Light Source

International Nuclear Information System (INIS)

van Steenbergen, A.

1979-01-01

The National Synchrotron Light Source comprises two high intensity electron storage rings for the generation of intense fluxes of synchrotron radiation in the vuv wavelength domain (700 MeV e - ring) and in the x-ray wavelength domain (2.5 GeV e - ring). A description is presented of the basic facility and the characteristics of the synchrotron radiation sources. The present plans for specific beam lines will be enumerated and the planned use of beam wigglers and undulators will be discussed

Women at CERN

CERN Multimedia

2004-01-01

To mark International Women's Day on 8 March, the Weekly Bulletin has looked at the careers of six female physicists, engineers and administrators working at CERN. A frequent question on the lips of newcomers to CERN as they take a quick look around them is 'But where are the women?' However, while it's true that the Laboratory has never had a huge number of female personnel, a closer look reveals that there are in fact quite a few around. To mark International Women's Day, the Bulletin has interviewed six women working at CERN to find out how they see the Organization, what they do and what they think about their daily working lives. Creating a link 'Maybe because I grew up during World War II, my parents always taught me to respect people of other nationalities, religions, colour, etc., so one thing I have always appreciated about CERN is that it promotes this tolerance and understanding by giving us the great privilege of working side by side with colleagues from many cultures and walks of life.' Pegg...

CERN in detail

CERN Multimedia

Laëtitia Pedroso

2010-01-01

Before, you had to go on the TPG website to find a tram-route, use Google Maps to see an aerial photo of CERN, and look for CERN buildings on map.web.cern.ch. Now, that's ancient history, with a new Geographical Information System (GIS) Portal set up by the Design Office and Patrimony Service (GS/SEM/DOP).  It's a one-stop-shop for all this information and much more.   A screenshot of the GIS Portal. Over the past few days, you might have noticed the new interface called MAPSearch that pops up when you make a building search using the Building and Roads field on the CERN homepage. This is a simplified version of the new GIS web Portal, a project on which the GS Department's Design Office and Patrimony Service has been working since January 2010. "In today's informatics age, we need to respond ever more quickly to increasing numbers of specific user requests," explains Project Leader Youri Robert. This is more than just a new release of an old tool, it's a completely n...

CERN's Guardian Angels

CERN Multimedia

2002-01-01

Any trouble at CERN? The Technical Control Room operates the entire technical infrastructure of CERN every day, all year long. They deal with problems that go from simple water leaks to devastating power cuts.   The Technical Control Room with Kenneth Olesen and Mark Harvey, minutes before their starting time. This big room is probably the liveliest at CERN, since there's always someone there, everyday, all year long. Laurent Randot and Eric Lienard working in the Technical Control Room at CERN in building 212. They've started at 7 a.m. and today has been a relatively quiet day. There have been some microcuts in the electric net because of the wind. But these have been repaired rather quickly... The relief: It's 2.30 p.m. Time for Laurent Randot and Eric Lienard to show their colleagues Mark Harvey and Kenneth Olesen what has been going on during the morning. They are the next TCR team of the day. Mark Harvey and Kenneth Olesen start their working day. They will work until 11p.m., when another team wil...

CERN Cricket Club

CERN Multimedia

Staff Association

2014-01-01

CERN CRICKET CLUB   The CERN Cricket Club 2014 season has been a good one so far with the team qualifying for the Swiss Cup semi-finals, with home advantage on the Prevessin ground on Sunday, August 24th. Their opponents will only be known the day before when the final game in the Eastern Division is played.  The CERN ground hasn’t quite recovered from the Bosons&More party last year, the wet weather making it impossible to roll the ground, but the new, wider strip is a big improvement. Net practice eventually started in late July, which is probably why the results at the beginning of the season weren’t so good. As match reports are too long to be included in the weekly bulletin, the full reports and the schedule can be found under “Matches (Fixtures, results, reports)” on the Cricket Club web site at http://cern.ch/Club-Cricket/    Anyone interested in playing cricket is welcome to join us at net practice, which takes pla...

CERN Women's club

CERN Multimedia

CERN Women's club

2010-01-01

The Welcome Center The Welcome Center website for CERN newcomers – and everyone else at CERN – has celebrated its first anniversary in operation. It began as a project to organize all the various information available at CERN into an easy to use site, with advice to help you make the most of your time here. It continues to be updated as new information becomes available. Lori Hakulinen and her helpers offer to meet with anyone who has questions. They can advise you on weekend activities, local restaurants and where to buy hard to find items or some of your favorite things from home, in addition to all of the practicalities you need to know, such as how to find housing or have a telephone installed, where to take language classes and much, much more. It’s all listed at: http://cern.ch/club-cwc-newcomers In general, meetings take place the first and third Thursdays in the month at Restaurant No. 1 in the Children’s Dining Room. (Please consult the Homepage for schedu...

A Princess at CERN

CERN Multimedia

2009-01-01

On 16 March HRH Princess Maha Chakri Sirindhorn of Thailand visited CERN for the third time. After meeting the Director-General, she toured the CMS experimental area and LHC tunnel with Coordinator for external relations Felicitas Pauss and CMS Spokesperson Jim Virdee. During her visit she took a particular interest in CERN’s education programme. From left to right, Emmanuel Tsesmelis, from the CERN Directorate’s office, Jim Virdee, CMS Spokesperson, the Princess of Thailand and Felicitas Pauss, CERN Coordinator for external relations.

La Hollande au CERN

CERN Multimedia

CERN Press Office. Geneva

1995-01-01

On 17 October the third industrial exhibition, "Holland at CERN" was officially opened by Dr R.J. van Duinen, President of the Dutch Organisation for Scientific Research (NWO). In his opening speech he encouraged scientific organisations such as CERN to take full advantage of industry's ability to design and invent new processes and equipment stressing that the purpose of the "Holland at CERN" exhibition was not simply to sell equipment, but to establish an efficient cross-fertilisation between fundamental science and industry.

Cern Cricket Club

CERN Multimedia

Cern Cricket Club

2014-01-01

  Cern Cricket Club The CERN Cricket Club 2014 season has started earlier than usual, with a game scheduled for the first time ever on Easter Sunday.  Due to repair work for the damage done to the ground because of the “Bosons&More” party at the end of September, all games until June have had to be scheduled away. Net practice, which normally takes place on the ground from mid-April, will not start until mid-June. The club is always looking for new players and newcomers will be made very welcome. Anyone who is interested in joining the club should sign up on our web site: http://cern.ch/Club-Cricket/    

CHOEUR DU CERN

CERN Multimedia

CHOEUR DU CERN

2010-01-01

Les répétitions du chœur du CERN reprendront le mercredi 15 septembre à 20.00 heures à l’amphithéâtre principal – bâtiment 500. Au programme la préparation de notre concert de Noël avec la Missa Brevis, KV115, de Léopold Mozart et de la musique de Noël d’Europe. Les personnes qui aiment chanter, notamment des sopranes et des ténors, sont les bienvenues. Pour tout contact s’adresser à : Baudouin Bleus - (tél.CERN 767 82 44) -(baudouin.bleus@cern.ch) ou Martin Gatehouse ( martin.gatehouse@wanadoo.fr) ou Jean-Paul Diss (jean-pauldiss@wanadoo.fr).  

CERN Croquet club

CERN Multimedia

CERN Croquet Club

2018-01-01

The CERN Croquet Club warmly invites you to an “Open Day” at the CERN Croquet Club on Sunday afternoon, 1st July as of 14:00 We will show you how to play the different games and you can try them out yourselves. Croquet of course, but also the Japanese version, called Gateball, as well as Lawn Bowls, what one might call the British version of “Boules”. The Swiss Croquet Association will offer afternoon Tea and Cake For catering purposes, it would be nice if you can let us know in advance if you will be joining us. Friends and family ae welcome but they will require a CERN Access card. Hope to see you there.

“Hangout” with CERN this Thursday

CERN Multimedia

2012-01-01

Starting Thursday 1 November at 5 pm CET, CERN is launching a new weekly “Hangout with CERN” that will be broadcast live on Google+ and YouTube.   The first hangout will welcome virtual visitors to CERN. Over the coming weeks the CERN hangouts will be taking you around CERN, on visits experimental sites and to speak with physicists, engineers and more. But most importantly, they will be opportunities to answer your questions. You can post your questions in advance, either in the comment section on facebook or on Twitter to @CERN with the hashtag #askCERN. The best questions will be answered during the hangout, and participants may be invited to participate live! Find out more here.  

Open Hardware at CERN

CERN Multimedia

CERN Knowledge Transfer Group

2015-01-01

CERN is actively making its knowledge and technology available for the benefit of society and does so through a variety of different mechanisms. Open hardware has in recent years established itself as a very effective way for CERN to make electronics designs and in particular printed circuit board layouts, accessible to anyone, while also facilitating collaboration and design re-use. It is creating an impact on many levels, from companies producing and selling products based on hardware designed at CERN, to new projects being released under the CERN Open Hardware Licence. Today the open hardware community includes large research institutes, universities, individual enthusiasts and companies. Many of the companies are actively involved in the entire process from design to production, delivering services and consultancy and even making their own products available under open licences.

A vintage celebration for CERN

CERN Multimedia

2004-01-01

Maurice Dupraz, a winegrower from the Etat de Genève vineyards, explains the characteristics of the Vigne des Nations to Robert Aymar, CERN's Director-General, and Robert Cramer, Conseiller d'Etat. As part of the fiftieth anniversary celebrations, CERN was the guest of honour at the Vigne des Nations ceremony organised by the Etat de Genève on 7 May. My Organization is greatly honoured to have the Vigne des Nations dedicated to it, said Robert Aymar, CERN's Director-General, at the ceremony held on the slopes of the Lully vineyards at Bernex on 7 May. Invited by Robert Cramer, President of Geneva's Conseil d'Etat, he spoke of the special links that have been forged over the last fifty years between CERN and the Canton of Geneva, where the Organization has its headquarters. Both of them paid tribute to Maurice Bourquin, former rector of the University of Geneva and Swiss delegate to the CERN Council since 1994, who became the first Swiss President of the CERN Council in 2000. The Vigne des Nations ceremony,...

Medals for CERN spin-offs

CERN Multimedia

2007-01-01

Nine companies whose inventions make use of technologies developed at CERN were honoured at the 35th Salon des Inventions, held in Geneva from 18-22 April. CERN was the Salon's guest of honour. The CERN 'table' at the 35th Salon des Inventions. This year's Salon included 1000 exhibitions brought by 775 exhibitors from 45 countries. Those with misgivings about the value of particle physics should take a look at the list of prize winners from the 35th Salon des Inventions, held in Geneva from 18-22 April. Nine of the winning inventions were spin-offs from technologies developed at CERN. CERN's research and development strategy includes a programme where technologies developed at and for the Laboratory are jointly developed with industries, so that they may be adapted into a commercial product for other uses. These include many different domains of applications such as medical imaging and IT. The following companies won awards at the Salon for inventions from CERN-developed technologies: PANalytical won a g...

CERN safety reaches out to medicine

CERN Document Server

2001-01-01

What do CERN and other scientific organizations like ESA and ESO have in common with neurosurgery and airlines? At first sight, not much. But all require sound safety management. CERN's expertise in this field was recently highlighted when two CERN engineers were invited to talk at an international conference on Quality Management and Risk Control in Neurosurgery.CERN has long been recognised as a centre of excellence in physics, and its spin-offs in fields such as medicine have been widely hailed. But increasingly, the Laboratory's expertise in the management of large international collaborations is also being recognised. Contacts between CERN and organizations like ESA and ESO, as well as with industry, bear witness to this fact. One recent example comes from Airbus Industrie, which organized a meeting in 1998 with CERN to compare notes on project management, safety, and quality assurance. Safety management is a recognised speciality in the field of project management and at CERN, TIS and the safety offici...

Iranian and Kazakh representatives visit CERN

CERN Multimedia

2004-01-01

On 1st and 4th March respectively, CERN received visits from Asset Issekeshev, Kazakhstan's Vice-Minister of Industry and Trade, and Reza Mansouri, Deputy Minister for Science, Research and Technology of the Islamic Republic of Iran. Asset Issekeshev and his delegation came to CERN with the aim of learning "the European way of building strong and effective ties between science and the industrial sector". Welcomed by Maximilian Metzger, CERN's Secretary-General, he visited the ATLAS assembly hall and the CLIC installations before signing the visitors' book. After a short visit to Point 5 (CMS), Reza Mansouri met CERN's Director-General, Robert Aymar, before talking to Iranian PhD students working on their theses at CERN. Asset Issekeshev, Kazakhstan's Vice-Minister of Industry and Trade, signs the visitors' book, watched by Maximilian Metzger, CERN's Secretary-General.From left to right: Mojtaba Mohammadi and Majid Hashemi (Iranian PhD students at CERN); Dr Daniel Denegri (CMS), Professor Re...

Member State Event: Telling CERN's Story

CERN Multimedia

2004-01-01

As part of the events to mark the Laboratory's fiftieth anniversary, members of the CERN personnel are telling the story of CERN. Robert Cailliau (on the right of the photograph), co-inventor of the Web and currently responsible for CERN's external communications, and Chiara Mariotti (in the center), a physicist working at CMS, were invited to talk about the history of CERN and the Web at a conference in the 'Science Thursdays' series entitled 'From the Quark to the Web' in Turin on 26 February. This was not their first appearance before a non-specialist audience (almost 1000 people that day!) eager to find out what goes on in a unique research centre like CERN as talking about the Laboratory's activities and its history are part and parcel of their work for the Organization. Anniversary Events in the Member States: This 'Science Thursday' event devoted to CERN was one of Italy's contributions to CERN's fiftieth anniversary celebrations. Coming up soon in the Member States: Italy International Centre...

CERN's Community "Log Book" turns 50

CERN Multimedia

Katarina Anthony

2015-01-01

For five decades, the CERN Bulletin has been a staple of the Organization. As CERN has grown as a laboratory and a community, the Bulletin has been there to cover each development as it happens. In honour of the publication's 50th anniversary, we're taking a trip through CERN’s history via the headings and hidden corners of its internal newsletter.     It's 1965 and CERN - now 11 years old - has matured from a simple lab to a fledgling community. While news could once spread in a single afternoon, CERN's growth necessitated a new approach to the sharing of internal information. Meanwhile, the CERN Courier - the only publication in town - was approaching a more global physics audience – an audience for whom CERN road closures were not breaking news. And so, in March 1965, the Weekly Bulletin was born. What was meant as a simple newsletter of events and internal announcements quickly developed into a wider source of news about CERN....

- NEW - CERN Housing Service – WWW BOOKING

CERN Multimedia

GS Department

2010-01-01

You can now easily reserve your room at the CERN Hotel and plan your stay at CERN directly online with help of the online CERN Hotel reservation NOW available at the following address: https://edh.cern.ch/Hostel/ Please contact the CERN Housing Service team if you have any queries (reception in Building 39, 74481). GS-SEM Group Infrastructure and General Services Department

CERN Library | Herwig Schopper and Luigi Di Lella present "60 Years of CERN Experiments and Discoveries" | 10 March

CERN Document Server

CERN Library

2016-01-01

"60 Years of CERN Experiments and Discoveries" edited by Herwig Schopper and Luigi Di Lella. Presentation on Thursday, 10 March at 4 p.m. in Room C The book is a compilation of the most important experimental results achieved during the past 60 years at CERN - from the mid-1950s to the recent discovery of the Higgs particle. It covers the results from the early accelerators at CERN to those at the LHC and provides an excellent review of CERN's achievements. Not only presented is the impressive scientific progress achieved during the past six decades presented, but also is demonstrated the special way in which successful international collaboration exists at CERN. The book has been reviewed in the January-February issue of the CERN Courier: see here. Thanks to an agreement between CERN and the publisher, the e-book is available online Open Access. 60 Years of CERN Experiments and Discoveries Edited by Herwig Schopper and Luigi Di Lella W...

Digital transverse beam dampers from the Brookhaven AGS

International Nuclear Information System (INIS)

Smith, G.A.; Castillo, V.; Roser, T.; Van Asselt, W.; Witkover, R.; Wong, V.

1995-01-01

A wide band, digital damper system has been developed and is in use at the Brookhaven Alternating Gradient Synchrotron (AGS). The system consists of vertical and horizontal capacitive pickups, analog and digital processing electronics, four 500 Watt wide band power amplifiers, and two pairs of strip line beam kickers. The system is currently used to damp transverse coherent instabilities and injection errors, in both planes, for protons and all species of heavy ions. This paper discusses the system design and operation, particularly with regard to stabilization of the high intensity proton beam. The analog and digital signal processing techniques used to achieve optimum results are discussed. Operational data showing the effect of the damping are presented

SYNCHROTRON HEATING BY A FAST RADIO BURST IN A SELF-ABSORBED SYNCHROTRON NEBULA AND ITS OBSERVATIONAL SIGNATURE

International Nuclear Information System (INIS)

Yang, Yuan-Pei; Dai, Zi-Gao; Zhang, Bing

2016-01-01

Fast radio bursts (FRBs) are mysterious transient sources. If extragalactic, as suggested by their relative large dispersion measures, their brightness temperatures must be extremely high. Some FRB models (e.g., young pulsar model, magnetar giant flare model, or supra-massive neutron star collapse model) suggest that they may be associated with a synchrotron nebula. Here we study a synchrotron-heating process by an FRB in a self-absorbed synchrotron nebula. If the FRB frequency is below the synchrotron self-absorption frequency of the nebula, electrons in the nebula would absorb FRB photons, leading to a harder electron spectrum and enhanced self-absorbed synchrotron emission. In the meantime, the FRB flux is absorbed by the nebula electrons. We calculate the spectra of FRB-heated synchrotron nebulae, and show that the nebula spectra would show a significant hump in several decades near the self-absorption frequency. Identifying such a spectral feature would reveal an embedded FRB in a synchrotron nebula

SYNCHROTRON HEATING BY A FAST RADIO BURST IN A SELF-ABSORBED SYNCHROTRON NEBULA AND ITS OBSERVATIONAL SIGNATURE

Energy Technology Data Exchange (ETDEWEB)

Yang, Yuan-Pei; Dai, Zi-Gao [School of Astronomy and Space Science, Nanjing University, Nanjing 210093 (China); Zhang, Bing, E-mail: zhang@physics.unlv.edu [Department of Physics and Astronomy, University of Nevada, Las Vegas, NV 89154 (United States)

2016-03-01

Fast radio bursts (FRBs) are mysterious transient sources. If extragalactic, as suggested by their relative large dispersion measures, their brightness temperatures must be extremely high. Some FRB models (e.g., young pulsar model, magnetar giant flare model, or supra-massive neutron star collapse model) suggest that they may be associated with a synchrotron nebula. Here we study a synchrotron-heating process by an FRB in a self-absorbed synchrotron nebula. If the FRB frequency is below the synchrotron self-absorption frequency of the nebula, electrons in the nebula would absorb FRB photons, leading to a harder electron spectrum and enhanced self-absorbed synchrotron emission. In the meantime, the FRB flux is absorbed by the nebula electrons. We calculate the spectra of FRB-heated synchrotron nebulae, and show that the nebula spectra would show a significant hump in several decades near the self-absorption frequency. Identifying such a spectral feature would reveal an embedded FRB in a synchrotron nebula.

CERN strives to stay ahead

International Nuclear Information System (INIS)

Sutton, Christine.

1987-01-01

The paper examines the future of CERN, with respect to its proposed research programme and its need to save money. Proposals concerning what accelerators CERN should build for the future are outlined; machines such as the Large Hadron Collider and the CERN Linear Collider have been proposed. Experimental expectations for the first Large Electron Positron (LEP) collider (now close to completion) are briefly described, along with the experimental investigations for the second phase of operation of LEP where modifications will increase the machine's energy. Criticisms of CERN's management by its governing body are also discussed. (UK)

Synchrotron Environmental Science-I Workshop Report

International Nuclear Information System (INIS)

1999-01-01

Attendees of the Synchrotrons Environmental Science 1 (SES-1) workshop represented a broad spectrum of environmental science research areas and expertise in all of the current synchrotrons techniques (X-ray scattering and diffraction, X-ray absorption spectroscopy, and two- and three-dimensional X-ray imaging). These individuals came together to discuss current measurement obstacles in environmental research and, more specifically, ways to overcome such obstacles by applying synchrotrons radiation techniques. Significant obstacles in measurement affect virtually all of the research issues described. Attendees identified synchrotrons approaches of potential value in their research. A number of the environmental research studies discussed are currently being addressed with some success by synchrotron-based approaches. Nevertheless, improvements in low-Z measurement capabilities are needed to facilitate the use of synchrotrons radiation methodologies in environmental research

Synchrotron Environmental Science-I Workshop Report.

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-08

Attendees of the Synchrotrons Environmental Science 1 (SES-1) workshop represented a broad spectrum of environmental science research areas and expertise in all of the current synchrotrons techniques (X-ray scattering and diffraction, X-ray absorption spectroscopy, and two- and three-dimensional X-ray imaging). These individuals came together to discuss current measurement obstacles in environmental research and, more specifically, ways to overcome such obstacles by applying synchrotrons radiation techniques. Significant obstacles in measurement affect virtually all of the research issues described. Attendees identified synchrotrons approaches of potential value in their research. A number of the environmental research studies discussed are currently being addressed with some success by synchrotron-based approaches. Nevertheless, improvements in low-Z measurement capabilities are needed to facilitate the use of synchrotrons radiation methodologies in environmental research.

CERN, the US and the W

CERN Document Server

Crease, Robert P

2004-01-01

In 1983, CERN physicists discovered the W boson earning them the first Nobel prize. This discovery served as the turning point for CERN from the point of view of the self-confidence of its physicists, the confidence of its fund-raisers, and its reputation in the US. However, this feat did not come as easy for CERN. Rivalry with the US revealed complexities. Nevertheless in the end, CERN physicists became the more successful. Recognizing this, US physicists agreed to collaborate with CERN physicists. Today, there is no more political competition over accelerators between the two groups. (Edited abstract).

CERN – better than science fiction!

CERN Multimedia

2007-01-01

From left to right: Allan Cameron (Production Designer), Sam Breckham (Location Manager), James Gillies (Head of Communication at CERN), Jacques Fichet (from the CERN Audiovisual Service), Rolf Landua (former spokesman of the ATHENA antihydrogen experiment at CERN and Head of CERN’s Education Group), Ron Howard, and Renilde Vanden Broeck (CERN press officer). The two-time Academy Award-winning American film director, Ron Howard, recently visited CERN for background research in preparation for his new film Angels and Demons, based on the book by Dan Brown. He also filmed the adaption of Brown’s bestselling novel The Da Vinci Code last year.

Collide@CERN - public lecture

CERN Multimedia

2012-01-01

CERN, the Republic and Canton of Geneva and the City of Geneva are delighted to invite you to a public lecture by Gilles Jobin, first winner of the Collide@CERN Geneva Dance and Performance Artist-in-residence Prize, and his CERN inspiration partner, Joao Pequenao. They will present their work in dance and science at the Globe of Science and Innovation on Wednesday, 23 May 2012 at 7 p.m. (doors open at 6.30 p.m.).   
                                                  Programme 19:00 Opening address by - Professor Rolf-Dieter Heuer, CERN Director-General, - Ariane Koek...

CERN

CERN Multimedia

2007-01-01

"Geat ready for the mother of all particle accelerator: the Large Hadron Collider (LHC), nearing completion at CERN, the International particle physics lab headquartered in Geneva, Switzerland." (1 paragraph)

CERN Housing Service – New website

CERN Multimedia

GS Department

2009-01-01

You can now consult the new CERN Housing Service website which includes information relating to the CERN hostels booking rules, special negotiated rates for hotels in the local area, rental offers from the local private sector, etc.: https://espace.cern.ch/hostel-service/default.aspx Please contact the CERN Housing Service team if you have any queries (reception in Building 39, 74481). GS-SEM Group Infrastructure and General Services Department

CERN Housing Service – New website

CERN Multimedia

GS Department

2009-01-01

You can now consult the new CERN Housing Service website which includes information relating to the CERN hostel booking rules, special negotiated rates for hotels in the local area, rental offers from the local private sector, etc.: https://espace.cern.ch/hostel-service/default.aspx Please contact the CERN Housing Service team if you have any queries (reception in Building 39, 74481). GS-SEM Group Infrastructure and General Services Department

CERN Relay Race

CERN Document Server

2005-01-01

The CERN Relay Race will take place around the Meyrin site on Wednesday 18 May between 12.15 and 12.35. This year, weather permitting, there will be some new attractions in the start/finish area on the field behind the Main Building. You will be able to: listen to music played by the CERN Jazz Club; buy drinks at the bar organised by the CERN Running Club; buy lunch served directly on the terrace by the restaurant Novae. ATTENTION: concerning traffic, the recommendations are the same as always: If possible, please avoid driving on the site during this 20 minute period. If you do meet runners in your car, please STOP until they all have passed. Thank you for your understanding.

Upcoming opening of CERN's new Mobility Centre

CERN Multimedia

2016-01-01

On 29 February, CERN’s brand new Mobility Centre opened in the Globe car park. The Centre has been created to cater to the transport needs of everyone at CERN, to simplify procedures and to centralise all the transport services on offer: the rental of CERN bikes and cars, the CERN car-sharing scheme and SIXT car rental.   From 29 February onwards, the Mobility Centre in the Globe car park will be the place to go for all your duty travel needs: rental of CERN cars (with or without the CERN logo), SIXT car rental, CERN bike rental, distribution of cards allowing the use of CERN’s self-service bike- and car-sharing schemes. That same day, the premises currently housing the Car Pool in Building 130 will become the CERN garage, responsible for: upkeep and repairs on CERN bikes, minor maintenance work on CERN vehicles (e.g. replacing windscreen wipers, bulbs and fuses, refilling windscreen washer fluid, pumping up tyres, etc.), arranging and following up the repair and maintenan...

CERN and the LHC

CERN Multimedia

Cramer, J G

1992-01-01

CERN, a high-energy physics laboratory in Europe, is planning to build a more powerful particle accelerator, the Large Hadronic Collider. The US spreads its accelerators around the country while most of Europe's research is conducted at and around CERN.

First experimental evidence of hydrodynamic tunneling of ultra-relativistic protons in extended solid copper target at the CERN HiRadMat facility

Science.gov (United States)

Schmidt, R.; Blanco Sancho, J.; Burkart, F.; Grenier, D.; Wollmann, D.; Tahir, N. A.; Shutov, A.; Piriz, A. R.

2014-08-01

A novel experiment has been performed at the CERN HiRadMat test facility to study the impact of the 440 GeV proton beam generated by the Super Proton Synchrotron on extended solid copper cylindrical targets. Substantial hydrodynamic tunneling of the protons in the target material has been observed that leads to significant lengthening of the projectile range, which confirms our previous theoretical predictions [N. A. Tahir et al., Phys. Rev. Spec. Top.-Accel. Beams 15, 051003 (2012)]. Simulation results show very good agreement with the experimental measurements. These results have very important implications on the machine protection design for powerful machines like the Large Hadron Collider (LHC), the future High Luminosity LHC, and the proposed huge 80 km circumference Future Circular Collider, which is currently being discussed at CERN. Another very interesting outcome of this work is that one may also study the field of High Energy Density Physics at this test facility.

First experimental evidence of hydrodynamic tunneling of ultra–relativistic protons in extended solid copper target at the CERN HiRadMat facility

CERN Document Server

Schmidt, R; Sancho, J Blanco; Burkart, F; Grenier, D; Wollmann, D; Tahir, N A; Shutov, A; Piriz, A R

2014-01-01

A novel experiment has been performed at the CERN HiRadMat test facility to study the impact of the 440 GeV proton beam generated by the Super Proton Synchrotron on extended solid copper cylindrical targets. Substantial hydrodynamic tunneling of the protons in the target material has been observed that leads to significant lengthening of the projectile range, which confirms our previous theoretical predictions [N. A. Tahir et al., Phys. Rev. Spec. Top.-Accel. Beams 15, 051003 (2012)]. Simulation results show very good agreement with the experimental measurements. These results have very important implications on the machine protection design for powerful machines like the Large Hadron Collider (LHC), the future High Luminosity LHC, and the proposed huge 80 km circumference Future Circular Collider, which is currently being discussed at CERN. Another very interesting outcome of this work is that one may also study the field of High Energy Density Physics at this test facility.

Helping CERN give back to society

CERN Multimedia

2014-01-01

The CERN & Society mission: ‘To spread the CERN spirit of scientific curiosity for the inspiration and benefit of society.’   Digital library schools in Africa, Arts@CERN, a beam line for schools competition and perhaps soon a dedicated biomedical research facility: CERN infrastructure and expertise have a great influence on society, and we have the potential to do much more. For that, however, we need help, and that’s why we have launched the CERN & Society initiative, which this week sees the publication of a new website for those who want to understand more about how our research touches everyday life, as well as for those who wish to help CERN in this new endeavour. Fundamental research fulfils a very human need. The quest to understand the universe we live in is as old as humanity itself, and CERN is in the vanguard of that effort today. For our scientists and engineers, pushing technology to the limit is part of their day job, and in doing so they ...

Developers@CERN Forum | Python at CERN | 30 – 31 May

CERN Multimedia

2016-01-01

The Developers@CERN Forum is an event by developers for developers aimed at promoting knowledge- and experience-sharing (see here). The second forum will take place in the IT auditorium in the afternoons of 30 and 31 May.   With the topic “Python at CERN”, it will consist of a series of talks regarding the Python language, frameworks and tools used at CERN. Are you a Python guru or would you like to learn? Come and share your Python experiences with other developers! Submissions for presentations and workshops are open until 9 May at http://cern.ch/dev-forum. If you would like to stay informed about this or future events, please subscribe to the announcement e-group (just a few e-mails per year) here. 

Collide@CERN ProHelvetia Public Lecture

CERN Multimedia

CERN. Geneva; Heuer, Rolf; Mr. de Diesbach, Simon; Mr. Dubois, Marc; Ms. Perrenoud, Laura; Mr. Vust, Michel; Mrs. Bello, Monica

2015-01-01

You are very warmly invited to the opening presentation of Fragment.In’s residency at CERN. Fragment.In are the winners of Collide@CERN ProHelvetia, a collective formed by Laura Perrenoud, Simon de Diesbach, and Marc Dubois. They will present their artistic work along with their CERN scientific inspiration partner, who will present his/her work on Science. In their proposal, Fragment.In has a unique, original and creative approach to data visualization. We look forward to having them at CERN. Collide@CERN is the three month residency programme providing artists with time and space to reflect, research and renew their artistic practice.

CERN CAR CLUB

CERN Multimedia

Automobile club

2009-01-01

You are cordially invited to the next General Assembly of the CERN Car Club Tuesday 12 January 2010 at 5:45pm Bldg. 593 / room 11 As the end of 2009 is approaching, it is time to think about renewing your subscription. Therefore next time you are on the CERN-Meyrin site or at the Post Office counter don’t forget to fill in the payment slip to continue to be a part of our large family. The fee remains unchanged: 50 CHF. For those of you who are regular users of our equipment and who know of all the advantages that the club is in a position to offer, it seems pointless to give details, we are sure that many of you have made use of them and are satisfied. We remind you everyone working on CERN site is entitled to become a member of our club, this includes industrial support personnel and staff of companies which have a contract with CERN. If you are not yet a member, come and visit us! We will be happy to welcome you and show you the facilities, or you can visit our web site. The use of the club&...

CERN Shop - Christmas Sale in Bldg. 33

CERN Multimedia

PH Department

2010-01-01

Looking for Christmas present ideas? The CERN Shop will give CERN card holders a special reduction of 10 % on all CERN Shop articles from Monday 13.12.2010 to Saturday 18.12.2010. Come and visit the CERN Shop in the Reception Building 33.

High duty factor plasma generator for CERN's Superconducting Proton Linac.

Science.gov (United States)

Lettry, J; Kronberger, M; Scrivens, R; Chaudet, E; Faircloth, D; Favre, G; Geisser, J-M; Küchler, D; Mathot, S; Midttun, O; Paoluzzi, M; Schmitzer, C; Steyaert, D

2010-02-01

CERN's Linac4 is a 160 MeV linear accelerator currently under construction. It will inject negatively charged hydrogen ions into CERN's PS-Booster. Its ion source is a noncesiated rf driven H(-) volume source directly inspired from the one of DESY and is aimed to deliver pulses of 80 mA of H(-) during 0.4 ms at a 2 Hz repetition rate. The Superconducting Proton Linac (SPL) project is part of the luminosity upgrade of the Large Hadron Collider. It consists of an extension of Linac4 up to 5 GeV and is foreseen to deliver protons to a future 50 GeV synchrotron (PS2). For the SPL high power option (HP-SPL), the ion source would deliver pulses of 80 mA of H(-) during 1.2 ms and operate at a 50 Hz repetition rate. This significant upgrade motivates the design of the new water cooled plasma generator presented in this paper. Its engineering is based on the results of a finite element thermal study of the Linac4 H(-) plasma generator that identified critical components and thermal barriers. A cooling system is proposed which achieves the required heat dissipation and maintains the original functionality. Materials with higher thermal conductivity are selected and, wherever possible, thermal barriers resulting from low pressure contacts are removed by brazing metals on insulators. The AlN plasma chamber cooling circuit is inspired from the approach chosen for the cesiated high duty factor rf H(-) source operating at SNS.

News from the CERN Printshop

CERN Multimedia

IT Department

2010-01-01

Please note there are a limited number of the 2011 CERN wall calendars now available from the Printshop, located in Building 510-R-007. These have been printed on card in A3 and A4. If you need more than a few copies, there are two solutions: download the file and print your own on paper; send us an e-mail to place an order. Please visit the new Printshop website for more information: http://cern.ch/printshop. Printshop reception opening hours: 10h00-12h00 and 13h00-15h00. Many thanks. CERN Printshop Tel: 72426 E-mail: Printshop@cern.ch

Scientific Information Service at CERN

CERN Document Server

Pereira, Margarida

2016-01-01

Dissemination of information is an essential part of CERN's mission. It brings people together from all around the world and trains the scientists of tomorrow. CERN scientific output is documented and made available for the scientific community and the general public through the CERN Document Server, INSPIRE-HEP and Wikipedia. This report presents the work done in the Scientific Information Service during the summer student program.

UK Mission to CERN

CERN Multimedia

2004-01-01

At the end of June, nine experts from UK industry visited CERN to study techniques for developing distributed computing systems and to look at some specific applications. In a packed three-day programme, almost 40 CERN experts presented a comprehensive survey of achievements.

Cern-Grid besteht Belastungsprobe

CERN Multimedia

2005-01-01

In the European Center for Nuclear Research, CERN, in Geneva the Grid Computing infrastructure's building took a further hurdle: between CERN and seven Research Centers around the World, during 10 days, a continuous flow of about 600 MByte was achieved (¼ page)

CERN welcomes new members

Science.gov (United States)

2017-08-01

Lithuania is on course to become an associate member of CERN, pending final approval by the Lithuanian parliament. Associate membership will allow representatives of the Baltic nation to take part in meetings of the CERN Council, which oversees the Geneva-based physics lab.

CERN openlab Open Day

CERN Multimedia

Purcell, Andrew Robert

2015-01-01

The CERN openlab Open Day took place on 10 June, 2015. This was the first in a series of annual events at which research and industrial teams from CERN openlab can present their projects, share achievements, and collect feedback from their user communities.

CERN's 25th Anniversary

CERN Multimedia

CERN PhotoLab

1979-01-01

A ceremony in the Main Auditorium on 23 June 1979 to mark the 25th Anniversary of CERN. A photo of the five Director-Generals of CERN, from left to right: John Adams, Willi Jentschke, Felix Bloch, Viki Weisskopf and Leon van Hove.

Developers@CERN Forums: Python

CERN Multimedia

CERN. Geneva

2016-01-01

The Developers@CERN Forums second edition took place at the end of May on the topic of Python. How do developers at CERN interact with Python? Which cutting-edge projects are using Python? What were the highlights of this most recent forum?

CORNELL: Synchrotron 25

International Nuclear Information System (INIS)

Anon.

1993-01-01

A recent celebration marked the twenty-fifth anniversary of the Cornell Electron Synchrotron. The major milestone in the commissioning of the synchrotron was on October 11, 1967 when Helen Edwards, Boyce McDaniel, and Maury Tigner achieved a 7 GeV beam, a worldrecord energy for electron synchrotrons at that time. Like so many advances in experimental physics, this occurred early in the morning - 3 a.m.! The transition from accelerator commissioning to high energy physics operation was extremely rapid; 7 GeV operation for data collection was routine just five weeks later. Throughout its life as a source of photon and electron beams for fixed target experiments, the synchrotron maintained energy leadership for circular electron machines. Originally designed for operation at 10 GeV, eventually it consistently provided beams for experiments at energies up to 11.6 GeV. It now operates at 5 GeV, serving as the injector for the CESR electron-positron storage ring. Robert Wilson was director of the laboratory during the design and most of the construction of the machine. He left near the end of the construction to become the first director of Fermilab and was replaced by Boyce McDaniel, who guided the laboratory from the completion of the synchrotron to the construction and early operation of CESR. Wilson recalled how the laboratory had originally proposed a 3 GeV turnkey machine to be built entirely by industry and would fit in the space previously occupied by earlier Cornell accelerators. However, members of the laboratory realized that 3 GeV would not open new physics frontiers, that the construction of the accelerator was much of the fun of doing high energy physics experiments, and that a more challenging project was needed. This led to the proposal for the 10 GeV synchrotron which was built in the ''Cornell Style'' with many of the components fabricated and nearly all of the assembly done at Cornell

CORNELL: Synchrotron 25

Energy Technology Data Exchange (ETDEWEB)

Anon.

1993-03-15

A recent celebration marked the twenty-fifth anniversary of the Cornell Electron Synchrotron. The major milestone in the commissioning of the synchrotron was on October 11, 1967 when Helen Edwards, Boyce McDaniel, and Maury Tigner achieved a 7 GeV beam, a worldrecord energy for electron synchrotrons at that time. Like so many advances in experimental physics, this occurred early in the morning - 3 a.m.! The transition from accelerator commissioning to high energy physics operation was extremely rapid; 7 GeV operation for data collection was routine just five weeks later. Throughout its life as a source of photon and electron beams for fixed target experiments, the synchrotron maintained energy leadership for circular electron machines. Originally designed for operation at 10 GeV, eventually it consistently provided beams for experiments at energies up to 11.6 GeV. It now operates at 5 GeV, serving as the injector for the CESR electron-positron storage ring. Robert Wilson was director of the laboratory during the design and most of the construction of the machine. He left near the end of the construction to become the first director of Fermilab and was replaced by Boyce McDaniel, who guided the laboratory from the completion of the synchrotron to the construction and early operation of CESR. Wilson recalled how the laboratory had originally proposed a 3 GeV turnkey machine to be built entirely by industry and would fit in the space previously occupied by earlier Cornell accelerators. However, members of the laboratory realized that 3 GeV would not open new physics frontiers, that the construction of the accelerator was much of the fun of doing high energy physics experiments, and that a more challenging project was needed. This led to the proposal for the 10 GeV synchrotron which was built in the ''Cornell Style'' with many of the components fabricated and nearly all of the assembly done at Cornell.

IMPROVEMENT OF THE CERN SPS ELECTROSTATIC SEPTA ION TRAPS

CERN Multimedia

Balhan, Bruno; Barlow, Roger Andrew; Raffaele, Graziano

2016-01-01

At CERN, the SPS synchrotron is equipped with a slow extraction channel towards the fixed target beam lines in the North Area This channel includes five consecutive electrostatic septa, where the field free region and the active high field region are separated by an array of tungsten-rhenium wires. The field-free region provides for the circulating beam, while the high field region is used to deflect the extracted beam. Since the residual gas can be ionized by the orbiting beam, low energy ions could cross the wire array and enter the high field region and cause high voltage breakdown when accelerated onto the cathode. To prevent low energy ions from entering this high electric field region, a vertical field is applied to the orbiting beam using so-called ‘ion traps’ for active protection. The vertical field is created by electrodes placed inside the region containing the circulating beam. Due to electromagnetic coupling onto the ion trap electrodes observed with the high frequency LHC beam (25 ns spaced ...

CERN at ESOF 2016

CERN Multimedia

James Gillies

2016-01-01

CERN had a major presence at the ESOF2016 conference this week, largely in collaboration with our EIROforum partners. A keynote session featuring the CERN Director-General, Fabiola Gianotti, EMBL Director-General, Iain Mattaj, and ESO Director for Science, Rob Ivison, and chaired by BBC science correspondent Pallab Ghosh debated the value of European collaboration in science.   The focal point of EIROforum’s presence was a stand highlighting the societal benefit of EIROforum science. (Image: Matt Wilkinson Photography/ ESOF 2016) A double session covered the science of the EIROs, with ATLAS physicist Claire Lee representing CERN, and there was a session exploring the ways that the EIROforum organisations create business value locally, with the leader of the Knowledge Transfer group, Giovanni Anelli, representing CERN. The focal point of EIROforum’s presence was a stand highlighting the societal benefit of EIROforum science. Side events linked to the stand discussed subjects su...

Industrial Activity at CERN

CERN Document Server

Kowalik, G

2000-01-01

The decrease in the number of CERN staff creates the need for optimization of the non-core, infrastructure-related activities. An industrial, service-orientated approach has long been considered as an appropriate way to cope with the problem of diminishing resources. This paper presents industrial and service activity issues at CERN based on the experience of the exploitation of the power network. The most important problems linked to the application of the industrial approach to the exploitation of equipment in the CERN research environment are covered. These include the interface between accelerators and electrical exploitation services, external and internal regulations, sharing of responsibility between CERN staff and external contractors, continuous modification of clients' requirements, the balance between the cost of accelerator downtime versus the cost of infrastructure upgrade. A benchmarking through a comparison with a big industrial manufacturer is followed by recommendations for possible improveme...

Sn-In-Ag phase equilibria and Sn-In-(Ag)/Ag interfacial reactions

International Nuclear Information System (INIS)

Chen Sinnwen; Lee Wanyu; Hsu Chiaming; Yang Chingfeng; Hsu Hsinyun; Wu Hsinjay

2011-01-01

Research highlights: → Thermodynamic models of Sn-In and Sn-In-Ag are developed using the CALPHAD approach. → Reaction layer in the Sn-In-(Ag)/Ag couples at 100 deg. C is thinner than those at 25 deg. C, 50 deg. C, and 75 deg. C. → Reactions in the Sn-20 wt%In-2.8 wt%Ag/Ag couples are faster than those in the Sn-20 wt%In/Ag couples. - Abstract: Experimental verifications of the Sn-In and Sn-In-Ag phase equilibria have been conducted. The experimental measurements of phase equilibria and thermodynamic properties are used for thermodynamic modeling by the CALPHAD approach. The calculated results are in good agreement with experimental results. Interfacial reactions in the Sn-In-(Ag)/Ag couples have been examined. Both Ag 2 In and AgIn 2 phases are formed in the Sn-51.0 wt%In/Ag couples reacted at 100 and 150 deg. C, and only the Ag 2 In phase is formed when reacted at 25, 50 and 75 deg. C. Due to the different growth rates of different reaction phases, the reaction layer at 100 deg. C is thinner than those at 25 deg. C, 50 deg. C, and 75 deg. C. In the Sn-20.0 wt%In/Ag couples, the ζ phase is formed at 250 deg. C and ζ/AgIn 2 phases are formed at 125 deg. C. Compared with the Sn-20 wt%In/Ag couples, faster interfacial reactions are observed in the Sn-20.0 wt%In-2.8 wt%Ag/Ag couples, and minor Ag addition to Sn-20 wt%In solder increases the growth rates of the reaction phases.

Heavy flavour production and heavy flavour mixing at the CERN proton-antiproton collider

International Nuclear Information System (INIS)

Eijk, B. van.

1987-01-01

In this thesis some results of the proton-antiproton-collision experiment UA1 with the CERN Super Proton-Antiproton Synchrotron are presented and interpreted. Ch. 1 contians a general introduction to the physics motivations behind the proton-antiproton-collider project, a brief description of the CERN facilities and a summary of collider and UA1 physics achievements. Furthermore the concept of studying heavy flavours via their weak decays into muons is introduced. Ch. 2 gives a brief overview of the UA1 experimental set-up, while those parts of the detector that are relevant for the analysis, presented in this thesis, is discussed in some more detail. Ch. 3 contains a short introduction to, and motivation for the use of Monte Carlo techniques in event simulations, while Ch. 4 describes the framework of the recently developed 'EUROJET' event generator. In Ch. 5 a treatment is given of the theoretical background and concepts like 'quark-mixing' and 'CP-violation' are explained, also other useful definitions and formulae are introduced on which the later analysis of the same-sign to opposite-sign dimuon ratio is built. Data collection and event reconstruction is the subject of Ch. 6, while a detailed comparison between the theoretical models and experimentally obtained distributions is given in Ch. 7. Finally, in Ch. 8 some concluding remarks are made. 182 refs.; 81 figs.; 9 tabs

CERN car sharing scheme now open to everyone

CERN Multimedia

GS Department

2011-01-01

The CERN car sharing service is a self-service scheme providing a pool of 30 CERN cars available for pick-up free of charge from 13 points around the Meyrin and Prévessin sites. From Thursday, 1st December 2011, the service will be open to all members of the CERN personnel and contractors' personnel, in the framework of their professional activities at CERN only. The conditions of use can be consulted at: http://gs-dep.web.cern.ch/en/content/Mobility/Car_sharing To be able to use the service, members of the CERN personnel and contractors' personnel must: have a contractual link to CERN, possess an e-mail address registered in the CERN databases; hold an RFID access card, which can be obtained from the CERN Car Pool on presentation of a valid CERN access card. Car Pool, Building 130-R-012, open Monday-Friday, 8.00 a.m.-12.00 noon/1.00 p.m.-5.00 p.m. https://gs-dep.web.cern.ch/en/content/car-pool GS-IS

CERN Shop - Christmas Sale in Bldg. 33

CERN Multimedia

PH Department

Looking for Christmas present ideas? The CERN Shop will give the CERN card holders a special reduction of 10 % on all CERN Shop articles from Friday 11.12.2009 to Thursday 17.12.2009. Come to visit the CERN Shop at the Reception, Building 33. PH-EDU-PO

Member State Event: Telling CERN's story !

CERN Multimedia

2004-01-01

As part of the events to mark the Laboratory's fiftieth anniversary, members of the CERN personnel are telling the story of CERN. Robert Cailliau (on the right), currently responsible for CERN's external communications, and Chiara Mariotti (in the center), a physicist working at CMS, were invited to talk about the history of CERN and the Web at a conference in the 'Science Thursdays' series entitled 'From the Quark to the Web' in Turin on 26 February.

10,000th teacher visits CERN

CERN Multimedia

Kathryn Coldham

2016-01-01

This year, the 10,000th teacher will visit CERN since its first teacher programme in 1998.   HST 2016 teachers with CERN Director-General Fabiola Gianotti in the CERN Council Chamber. (Image: Maximilien Brice/CERN) This summer, CERN welcomed the 10,000th teacher to participate in one of its teacher programmes! This milestone was achieved in this year’s International High School Teacher (HST) programme, a three-week residential programme that saw 48 enthusiastic teachers flock from all over the world to help inspire young minds. Taking place every July since 1998, the HST programme aims to increase teachers’ knowledge on the cutting-edge particle physics research currently being carried out at CERN. It also opens up a whole new world of educational resources available for use by the teachers to inspire their students’ curious young minds. More information is available here.

CERN and Pakistan consolidate their partnership

CERN Multimedia

2006-01-01

During the President of Pakistan's visit to CERN, the Laboratory and Pakistan decided to strengthen their collaboration. The President of Pakistan, Pervez Musharraf, the Chairman of PAEC, Parvez Butt, and CERN's Director-General, Robert Aymar, exchange congratulations following the signing of the letter of intent to strengthen partnership between CERN and Pakistan.The President of the Islamic Republic of Pakistan, Pervez Musharraf, during his speech in the Council Chamber. The President of the Islamic Republic of Pakistan, General Pervez Musharraf, visited CERN on 27 January this year, accompanied by an important delegation of five ministers from the Pakistani Government, the Chairman of Pakistan's Atomic Energy Commission (PAEC), Parvez Butt, and an eminent former Chairman of the Commission, Ishfaq Ahmad, who pioneered cooperation with CERN. Welcomed by CERN's Director-General, Robert Aymar, the President visited the CMS experiment to which Pakistan is making a substantial contribution. The presidential pa...

CERN UN Roundtable

CERN Multimedia

CERN. Geneva; Del Rosso, Antonella; Gillies, James

2014-01-01

In the spirit of strengthening links and sharing best practices among the two Organizations, UNOG and CERN will be jointly organizing a round table discussion on the issue of “The challenge of communicating science and technology to the world: issues and solutions”. It is hoped that the discussions can highlight the experience of various organizations and institutions in their efforts to communicate and inform in several languages on topics – science and technology – that are often perceived as distant and arduous by the layman. ==>> Please note that registrations are now closed. It is not necessary to register for this event if you plan to watch it live on http://webcast.cern.ch. Send your questions to the speakers by email to: question@cern.ch

The World of Synchrotrons

Indian Academy of Sciences (India)

de Ciencias Fisicas,. Universidad Nacional. Autonoma de Mexico. Sameen Ahmed Khan. A summary of results on synchrotron radiation is presented along with notes on its properties and applications. Quantum aspects are briefly mentioned. Synchrotron radiation facilities are described briefly with a detailed coverage of ...

CERN servers donated to Ghana

CERN Multimedia

CERN Bulletin

2012-01-01

Cutting-edge research requires a constantly high performance of the computing equipment. At the CERN Computing Centre, computers typically need to be replaced after about four years of use. However, while servers may be withdrawn from cutting-edge use, they are still good for other uses elsewhere. This week, 220 servers and 30 routers were donated to the Kwame Nkrumah University of Science and Technology (KNUST) in Ghana.   “KNUST will provide a good home for these computers. The university has also developed a plan for using them to develop scientific collaboration with CERN,” said John Ellis, a professor at King’s College London and a visiting professor in CERN’s Theory Group.  John Ellis was heavily involved in building the relationship with Ghana, which started in 2006 when a Ghanaian participated in the CERN openlab student programme. Since 2007 CERN has hosted Ghanaians especially from KNUST in the framework of the CERN Summer Student Progr...

Back to school at CERN

CERN Multimedia

2007-01-01

The Education Group is expanding its courses for teachers: over 700 secondary school teachers will be going back to school at CERN this year. Thirty-seven teachers from various countries participated in the High School Teachers at CERN programme, with Rolf Landua, the head of the Education Group, Mick Storr, the Education Group’s programme coordinator and Robert Aymar, the CERN Director-General.From 3 to 8 July, CERN hosted the runners-up from the finals of the British Physics Olympiad, the prize for the winners being a trip to the International Physics Olympiad in Iran. The five students were invited to visit CERN to attend the summer student programme for three days. "This gives us an opportunity to study new subjects that are not necessarily part of the school curriculum. Even though I’ve heard about the various types of research, it is a real plus to be able to attend these lectures", explains Oliver Mac Farlane, a young stu...

The first CERN Spring Campus

CERN Multimedia

CERN Bulletin

2014-01-01

From 14 to 16 April, the first edition of the CERN Spring Campus took place in Spain. Taking place over three intensive days, this event brought experts from CERN together at the University of Oviedo, where they met the engineers and scientists of the future in a programme of scientific and technological dissemination and cultural exchange.   The young participants of the first CERN Spring Campus and their instructors show their enthusiasm after the intensive three-day course. “This three-day school focuses on preparing young engineers for the job market, with a particular emphasis on computing,” explains Derek Mathieson, Advanced Information Systems Group Leader in the GS Department and Head of the CERN Spring Campus organising committee. “We organised talks on entrepreneurship and IT, as well as on job interviews and CV writing. It was also an important opportunity for the participants to meet CERN computing engineers to find out what it is like to work in I...

CERN's role in medical applications

CERN Multimedia

Antonella Del Rosso

2014-01-01

Last week, CERN hosted the first meeting of the International Strategy Committee for medical applications. This Committee will help CERN establish its roadmap in the field of research and development activities for medical applications. Here the CERN Bulletin speaks with the Chair of the Committee as he shares his expectations and his vision.   Dr Michael Baumann is the Director of the Radiation Oncology department at the Carl Gustav Carus University Hospital in Dresden and of the Institute for Radiooncology of the Helmholtz-Zentrum Dresden-Rossendorf (Germany). He has recently been appointed Chair of CERN’s International Strategy Committee for medical applications – the team of experts who will advise the CERN Medical Applications Study Group led by Steve Myers. “CERN has a tremendous record in physics and basic research,” says Baumann. “I think that it has a very important role in steering some of the R&D that cannot be done at universities ...

Romania's flag raised at CERN

CERN Multimedia

Corinne Pralavorio

2016-01-01

A ceremony was held for the raising of the Romanian flag alongside the flags of CERN’s 21 other Member States.   The Romanian flag is raised alongside the flags of CERN’s other Member States, in the presence of the Romanian President, CERN’s Director-General, the President of the CERN Council and a large Romanian delegation. (Image: Maximilien Brice/ Sophia Bennett/CERN) On Monday, 5 September, the Romanian flag was raised in front of CERN for the first time, marking the country’s accession to Membership of the Organization. The blue, yellow and red flag joined those of the other 21 Member States of CERN in a ceremony attended by the President of Romania, Klaus Iohannis, the Romanian Minister for Education and Scientific Research, Mircea Dumitru, and several other members of the President’s office, the government and academia in Romania. The country officially became a CERN Member State on 17 July 2016, after 25 years of collaboration between the...

UN Secretary General visits CERN

CERN Multimedia

2008-01-01

UN Secretary General praises CERN in recent visit. Ban Ki-moon, Robert Aymar, CERN Director-General, and Sergei Ordzhonikidze, Director-General of the United Nations Office in Geneva at the CMS site.On Sunday 31 August, Ban Ki-moon, the UN Secretary General, made an important visit to CERN. Arriving in the late afternoon, he was warmly greeted at Point 5 by Robert Aymar, the Director-General, and the Sous-préfet of Gex, Olivier Laurens-Bernard. Accompanied by a UN delegation, Ban Ki-moon was also introduced to Jos Engelen, the Chief Scientific Officer, and Jim Virdee, the CMS spokesperson. He then took the opportunity to visit CMS and the machine tunnel. At the end of his short trip, Ban Ki-moon signed the Guest Book in the tradition of important dignitaries visiting CERN. Expressing his admiration for CERN’s spirit of collaboration, Ban Ki-moon said, "I am very honored to visit CERN, an invaluable scientific institution a...

2nd Developers@CERN Forum

CERN Multimedia

CERN. Geneva

2016-01-01

Are you a Python guru or would you like to learn?   The Developers@CERN Forum is an event by developers, for developers, aimed at promoting knowledge and experience sharing. This edition will take place at the IT Amphitheatre, on the 30th and 31st of May afternoons. It will consist of a series of short presentations and workshops. The topic for this conference will be Python at CERN: language, frameworks and tools. Have you got an idea for a presentation or workshop? Then, tell us about it (deadline on 9th of May). Registration will open in early May. Please subscribe to developers-forum-announce@cern.ch mailing list for further information. This event will be made by developers for developers. We are counting on your presence, but also on your contributions! To learn more about the initiative, read the CERN Bulletin article. Organization You can get in touch us at developers-forum-organizers@cern.ch.

CERN openlab enters new phase

CERN Multimedia

Katarina Anthony

2012-01-01

The newest phase of CERN’s openlab framework was inaugurated this week during a meeting of the openlab partners. This phase will last three years and will bring together existing openlab partners and a new contributor: Huawei.   Group picture taken at the first CERN openlab IV annual Board of Sponsors meeting, in the presence of the CERN Director-General, the partners and the openlab team members. © Fons Rademakers (CERN Photo Club). Eleven years ago, the creation of the CERN openlab created a long-term link between industrial partners and the Organization. Its framework has allowed industry to carry out large-scale IT research and development in an open atmosphere – an “Open Lab”, if you will. For CERN, openlab has contributed to giving the computing centre and, more broadly, the LHC community, the opportunity to ensure that the next generation of services and products is suitable to their needs. Now entering its fourth phase, openlab will ...

Search for the QCD critical point in nuclear collisions at 158A GeV at the CERN Super Proton Synchrotron (SPS)

NARCIS (Netherlands)

Anticic, T.; Botje, M.A.J.|info:eu-repo/dai/nl/070139032; Christakoglou, P.; van Leeuwen, M.|info:eu-repo/dai/nl/250599171

2010-01-01

Pion production in nuclear collisions at the Super Proton Synchrotron (SPS) is investigated with the aim to search, in a restricted domain of the phase diagram, for power laws in the behavior of correlations that are compatible with critical QCD. We analyzed interactions of nuclei of different sizes

CERN and ESA: fundamentally contrasting organisations?

International Nuclear Information System (INIS)

Bowell, Valerie

1988-01-01

The paper concerns the European Organisation for Nuclear Research (CERN) and the European Space Agency (ESA), and questions whether the United Kingdom (U.K.) will continue as a full member of these two organisations. A description is given of the establishment of these institutions, their collaboration and their activities. The effect of the U.K.'s financial difficulties on both CERN and ESA programmes is discussed. Figures are given on the actual cost to the U.K. of CERN and ESA, and also the CERN and ESA subscriptions as a percentage of total spending on particle physics and astronomy, for the period 1980-8. The U.K. committment to the ESA and CERN programmes are both described. (U.K.)

Synchrotron light source data book

International Nuclear Information System (INIS)

Murphy, J.

1989-01-01

The ''Synchrotron Light Source Data Book'' is as its name implies a collection of data on existing and planned synchrotron light sources. The intention was to provide a compendium of tools for the design of electron storage rings as synchrotron radiation sources. The slant is toward the accelerator physicist as other booklets such as the X-ray Data Booklet, edited by D. Vaughan (LBL PUB-490), address the 'use' of synchrotron radiation. It is hoped that the booklet serves as a pocket sized reference to facilitate back of the envelope type calculations. It contains some useful formulae in 'practical units' and a brief description of many of the existing and planned light source lattices

An Algerian Minister visits CERN

CERN Multimedia

2006-01-01

The Algerian Minister of Higher Education and Scientific Research, Rachid Haraoubia, visited CERN on 14 November. His party included the Rector of the University of Blida and the Director of the Algerian Ecole Nationale Polytechnique. Welcomed by CERN's Director-General, Robert Aymar, and Secretary-General, Maximilien Metzger, he signed the VIP Visitors' Book before going on to visit the ATLAS experiment and the LHC tunnel. He then had the opportunity to meet Algerian scientists working at CERN. Some fifteen Algerian physicists attached to European and US institutes are participating in the LHC experiments, in particular ATLAS. A formal collaboration agreement between Algeria and CERN is expected to be drawn up in the near future.

CERN Entrepreneur Mixer | 21 June | Pas perdus

CERN Multimedia

2016-01-01

  CERN Knowledge Transfer group is hosting an Entrepreneur Mixer, an event dedicated to building bridges between CERN innovative entrepreneurs. This will be a unique opportunity to discover business projects initiated by former CERN people, and to see how CERN technology is being exploited by start-up companies. The deadline for registration is Friday, 17 June. For more information, please visit the Indico page of the event: https://indico.cern.ch/event/537167/

Effects of Cu or Ag additions on the kinetics of MgB₂ phase formation in Fe-sheated wires

DEFF Research Database (Denmark)

Grivel, Jean-Claude; Abrahamsen, Asger Bech; Bednarcik, J.

2008-01-01

MgB2/Fe wires have been produced by the powder-in-tube technique following the in situ route. The influence of low amounts of Cu or Ag additions into the precursor powder mixture on the kinetics of MgB2 formation was studied in situ by means of synchrotron x-ray diffraction during heat-treatments...

France at CERN, 11-14 March 1986. CERN Courier, May 1986, v. 26(4)

Energy Technology Data Exchange (ETDEWEB)

Anon.

1986-05-15

More firms participated in the 1986 'France at CERN' Exhibition than in the previous exhibition in 1983. This year 55 firms, including three Chambers of Commerce and Industry, took part in the exhibition which comprised 34 stands. The choice of firms was approved by the official with responsibility for CERN at the Scientific and Technical Mission of the Ministry of Research and Technology, thereby ensuring that the exhibits corresponded to CERN's immediate needs and in particular to those of LEP.

National Synchrotron Light Source: vacuum system for National Synchrotron Light Source

International Nuclear Information System (INIS)

Schuchman, J.C.; Godel, J.B.; Jordan, W.; Oversluizen, T.

1978-01-01

The National Synchrotron Light Source (NSLS), a 24 million dollar project under construction at Brookhaven National Laboratory (BNL), is a research facility dedicated to the production of synchrotron radiation. Synchrotron radiation is that radiation produced by the acceleration of charged particles at near the speed of light. This facility will provide a continuous spectrum of radiation from the vacuum ultraviolet to the hard x-ray range. The radiation will be highly intense, 100% polarized, extremely well collimated and will have a pulsed time structure. The radiation will be produced in two electron storage rings at energies of 700 MeV and 2.5 GeV, respectively. A maximum of one ampere at 2 GeV, or one-half ampere at 2.5 GeV, of electron beam will be stored

CERN in the blogosphere

CERN Multimedia

CERN Bulletin

2011-01-01

CERN communicates with the outside world in many different ways – websites, publications, through the media and via twitter to name but a few. As of January, CERN has a new way of engaging with the world: a CERN institutional blog.   CERN’s blog was launched on 10 January on the Quantum Diaries platform, adding a new strand to a well-established site. Quantum Diaries was launched in 2005 as an initiative for the World Year of Physics promoted by the InterAction collaboration, a group that brings together the communication offices of some of the world’s major particle physics labs and organisations. The launch of institutional blogs from Brookhaven, CERN, Fermilab and TRIUMF has added an extra dimension to Quantum Diaries. Visits to the site jumped to 3000 per day with the addition of the institutional blogs, and that number is already growing. CERN’s first post explains one of the reasons we’re doing this. With the incredible thirst for informati...

CERN apprenticeship scheme honoured

CERN Document Server

2008-01-01

Prestigious awards for two apprentices who did their practical training at CERN. Sylvain Heinzen, apprentice physics lab technician at CERN, receiving his award from Pierre-François UNGER, State Councillor responsible for the Federal Department of the Economy and Health. The other award-winner, Cédric Gerber, is on the right of the photo.Among Geneva’s top apprentices who were honoured by the Fondation sociale de l’Union industrielle genevoise (UIG) on 28 October this year, were two CERN apprentices. Electronics technician Cédric Gerber and physics lab technician Sylvain Heinzen both did their four-year sandwich course at CERN, obtaining their professional qualification, the Certificat fédéral de capacité (CFC), in June. On top of that, Cédric Gerber, who had been a particularly outstanding apprentice, received two further distinctions at the CFC awards ceremony - the State Council prize for achieving one of the top-ten o...

Indian President visits CERN

CERN Multimedia

Katarina Anthony

2011-01-01

On 1 October, her Excellency Mrs Pratibha Devisingh Patil, President of India, picked CERN as the first stop on her official state visit to Switzerland. Accompanied by a host of Indian journalists, a security team, and a group of presidential delegates, the president left quite an impression when she visited CERN’s Point 2!   Upon arrival, Pratibha Patil was greeted by CERN Director General Rolf Heuer, as well as senior Indian scientists working at CERN, and various department directors. After a quick overview of the Organization, Rolf Heuer and the President addressed India’s future collaboration with CERN. India is currently an Observer State of the Organization, and is considering becoming an Associate Member State. A short stop in LHC operations gave Steve Myers and the Accelerator team the opportunity to take the President on a tour through the LHC tunnel. From there, ALICE’s Tapan Nayak and Spokesperson Paolo Giubellino took Pratibha Patil to the experiment&am...

CERN SHOP CHRISTMAS SALE

CERN Multimedia

Visits & Exhibition Service

2000-01-01

Looking for Christmas present ideas? Come to the Reception Shop Special Stand in Meyrin, Main Building, ground floor, from Tuesday 12 to Thursday 14 December from 10.00 to 16.00.   Sweat-shirt col zippé, grey, blue, black (M, L, XL) 30.- Sweat-shirt col polo, grey, collar blue (M, L, XL) 30.- T-shirt, black, (M, L, XL) 15.- WWW T-shirt, white, bordeau (M, L, XL) 15.- CERN silk tie (3 colours) 33.- Fancy silk tie (blue, bordeau 25.- Silk scarf (blue, red, yellow) 35.- Swiss army knife with CERN logo 25.- New model of CERN watch 25.- New CERN baseball cap 10.- Antimatter (English/anglais) 30.- The Search for Infinity (French, Italian, English,) 35.- Auf der Suche nach dem Unendlichen 45.- If you miss this special occasion, the articles are also available at the Reception Shop in Building 33 from Monday to Saturday between 08.30 and 17.30 hrs (Shop will be closed at 12.00 on 22.12.).

CERN and space science

CERN Multimedia

2009-01-01

The connection between CERN and space is tangible this week, as former CERN Fellow and ESA astronaut Christer Fuglesang begins the second week of his mission on space shuttle flight STS-128. I had the pleasure to meet Christer back in October 2008 at an IEEE symposium in Dresden, and he asked me whether we could give him something related to CERN for his official flight kit. We thought of caps and tee-shirts, but in the end decided to give him a neutralino as a symbol of the link between particle physics and the science of the Universe. Neutralinos are theoretical particles that the LHC will be looking for, and if they exist, they’re strong candidates for the Universe’s dark matter. Christer’s neutralino is just a model, of course, escaped from the particle zoo, but what better symbol of the connectedness of science? Christer Fuglesang is not the only link CERN has with the space shuttle programme. We’ve recently learned that...

Star spotting at CERN

CERN Multimedia

2008-01-01

This June, two American celebrities (and physics enthusiasts!) came to CERN. Brian Cox gave Mike Einziger (right), lead guitarist with the rock band Incubus, the star treatment in the ATLAS cavern. Jesse Dylan embraces the spirit of ATLAS! Mike Einziger, lead guitarist with the rock band Incubus, visited CERN on Friday 13 June between concerts in Finland and England. Einziger, a lifelong science enthusiast descended into the ATLAS and CMS caverns and visited the SM18 test magnet facility during his brief tour of CERN. Einziger learned about the LHC through watching online lectures from University of Manchester and ATLAS physicist Brian Cox, and was thrilled to have the chance to see the detectors in person. The musician has created an orchestral piece, inspired in part by the work being done at CERN for the LHC, which will have its debut in Los Angeles on 23 August. Just over a week earlier, Jesse Dylan, Hollywood film director a...

CERN anti-fraud policy

CERN Multimedia

2013-01-01

In 2011, a working group on improved fraud prevention and management was established. The group was composed of the Director of Administration and General Infrastructure, the Head of the Human Resources Department, and the Heads of the Legal Service and Internal Audit. It recommended the adoption of a global fraud prevention and management policy.   The global fraud prevention and management policy was implemented through the CERN Anti-Fraud Policy, which was endorsed by the Enlarged Directorate in May 2012 and approved by the Director-General for entry into force on 1 January 2013. The CERN Anti-Fraud Policy defines the Organization’s policy in matters of fraud.  CERN has a zero tolerance approach towards fraud, as it would compromise the accomplishment of its objectives and undermine its functioning, credibility and reputation. The policy also states CERN’s commitment to the prevention, identification and investigation of fraud. All CERN contributors have a key rol...

A new director for Arts@CERN

CERN Multimedia

CERN Bulletin

2015-01-01

On 2 March 2015, Mónica Bello will take the reins of the Arts@CERN programme. A few days before taking over the new job, the curator and art critic talked to the CERN Bulletin about her interest in arts and science, her motivations for the job, and her plans for the future of the programme.   Mónica Bello. “The exciting nature of CERN almost demands an artistic programme like Arts@CERN,” says Mónica, former artistic director of VIDA (one of the most important competitions in digital and new media arts worldwide), who has recently been appointed as the new director of the Arts@CERN programme. “The programme is unique as it provides the artist not only with resources, but also with interesting scientific topics and a natural way for the artists to become involved. Thanks to this programme, artists can come to CERN, bring their individuality, and really benefit from the sharing experience with scientists.” Mónica,...

CERN@school shoots for the stars

CERN Multimedia

Katarina Anthony

2011-01-01

CERN technology will be taking a stellar journey as the Langton Ultimate Cosmic ray Intensity Detector (LUCID) is launched into space in 2012. LUCID has been designed by students from the CERN@school programme using Timepix chips from the Medipix Collaboration at CERN.   CERN@school students present LUCID.  In today’s educational environment, a pioneering school physics programme that involves students in authentic research seems unlikely. But in the UK, the CERN@school programme is providing the resources for school students to do just that. “We develop projects which allow students to work alongside scientists and engineers before they go to university,” says Becky Parker, head of the Langton Star Centre and founder of the CERN@school programme. “Thanks to these programmes, students can make a genuine contribution to global scientific research. LUCID is the culmination of three years of efforts by the students.” Surrey Satellite Tech...

CERN Confirms commitment to Open Access

CERN Multimedia

2005-01-01

The CERN Library Information desk.At a meeting on the Wednesday before Easter, the Executive Committee endorsed a policy of open access to all the laboratory's results, as expressed in the document ‘Continuing CERN action on Open Access' (http://cds.cern.ch/record/828991/files/open-2005-006.pdf), released by its Scientific Information Policy Board (SIPB) earlier in the month. "This underlines CERN's commitment to sharing the excitement of fundamental research with as wide an audience as possible", said Guido Altarelli, current SIPB chairman. Open Access to scientific knowledge is today the goal of an increasing component of the worldwide scientific community. It is a concept, made possible by new electronic tools, which would bring enormous benefits to all readers by giving them free access to research results. CERN has implicitly supported such moves from its very beginning. Its Convention (http://cds.cern.ch/record/330625/files/cm-p00046871.pdf), adopted in 1953, requires openness, stipulating that "......

Collide@CERN: Horizons Irrésolus

CERN Multimedia

2016-01-01

Sound Installation by Collide@CERN Geneva artists Rudy Decelière and Vincent Hänni in collaboration with physicists Diego Blas and Robert Kieffer, for the Electron Festival 25-27th March, 2016 (see here).   Horizons irrésolus is a sound installation that follows on the artistic residency Collide@CERN 2014.    Registration is absolutely required. Each guest will have to have registered using their own name. Guests without having registered will not be able to come into CERN. Free entrance: Book here  A shuttle will be available every 15 minutes from 6 p.m. until 9 p.m. from CERN Reception (in front of CERN Globe) to the sound art installation. Access from Geneva to CERN Reception by tram 18, end of the line. With the support from The Republic and Canton of Geneva and The City of Geneva. Find out more on the artists and their Geneva 2...

6th IT First Tuesday@CERN

CERN Multimedia

François Grey

2005-01-01

Thursday 12 May, 17:30-19:30, Main Auditorium, CERN Data management in the 21st Century: the Petabyte challenge A Petabyte is a million Gigabytes, the equivalent of over 200,000 DVDs. That may seem like an enormous amount of data, but managing such quantities of data is a reality in the world of science, and is increasingly becoming an imperative in the world of business. This IT First Tuesday@CERN presents the Petabyte challenge, and some of the emerging solutions, from both scientific and commercial perspectives. For CERN's Large Hadron Collider, a Grid solution has been chosen to provide the necessary distributed storage capacity for the anticipated 15 Petabytes of data per year that this collider will produce. IBM is CERN's storage partner in the CERN openlab for DataGrid applications, and is testing the companies innovative TotalStorage SAN distributed filesystem in CERN's demanding IT environment. For Lausanne-based VisioWave, managing stored video data provides an extreme storage challenge. For D...

CERN has a new cultural policy

CERN Multimedia

Katarina Anthony

2010-01-01

A new cultural policy is to be unveiled at the beginning of 2011. Although CERN has been inspiring the works of artists for decades, the new policy represents the first official framework for CERN's engagement with the arts.   Screenshot of the upcoming ARTS@CERN Website. The new cultural policy features four main activities: the creation of an honorary advisory board, the launch of an Artist in Residence programme, support for the various cultural events developed at CERN, and a new website which will showcase CERN’s significant cultural activities and provide relevant information for both artists and people working at CERN. “The new cultural policy shows how much CERN values its significant role in culture,” explains Ariane Koek, the Communication Group’s cultural specialist working on this project. “CERN’s policy is extremely progressive, as it brings together art and science at the same level – Great Arts for Great Sci...

CERN software developers gathering in September

CERN Document Server

Antonella Del Rosso

2015-01-01

Hundreds of developers work on many different projects at CERN – from data analysis to beam operations and administrative applications. As of this September, they will have an opportunity to meet each other at the newly established Developers@CERN Forum.   “We go to conferences elsewhere but we hardly ever meet here at CERN, where we all work on our own separate software projects,” says José Carlos Luna, a member of the IT department and one of the organisers of the first Developers@CERN Forum. Indeed, although several CERN departments have software developers working in their teams, there is no proper “community” built around them. The first Developers@CERN Forum will be held on 28 and 29 September. The event is being organised by a few developers from the IT department, together with colleagues from the GS and EN departments. Its main scope is to reach out to all the departments in an effort to bring all CERN’s software dev...