WorldWideScience

Sample records for centrifugation

  1. CENTRIFUGE

    Science.gov (United States)

    Rushing, F.C.

    1960-09-01

    A vibration damping mechanism for damping vibration forces occurring during the operation of a centrifuge is described. The vibration damping mechanism comprises a plurality of nested spaced cylindrical elements surrounding the rotating shaft of the centrifuge. Some of the elements are held substantially stationary while the others are held with respect to a pair of hearings spaced along the rotating shaft. A fluid is retained about the cylindrical elements.

  2. CENTRIFUGE APPARATUS

    Science.gov (United States)

    Skarstrom, C.; Urey, H.C.; Cohen, K.

    1960-08-01

    A high-speed centrifuge for the separation of gaseous isotopes is designed comprising a centrifugal pump mounted on the outlet of a centrifuge bowl and arranged to pump the heavy and light fractions out of the centrifuge bowl in two separate streams.

  3. Centrifugal pumps

    CERN Document Server

    Anderson, HH

    1981-01-01

    Centrifugal Pumps describes the whole range of the centrifugal pump (mixed flow and axial flow pumps are dealt with more briefly), with emphasis on the development of the boiler feed pump. Organized into 46 chapters, this book discusses the general hydrodynamic principles, performance, dimensions, type number, flow, and efficiency of centrifugal pumps. This text also explains the pumps performance; entry conditions and cavitation; speed and dimensions for a given duty; and losses. Some chapters further describe centrifugal pump mechanical design, installation, monitoring, and maintenance. The

  4. Centrifugal pumps

    CERN Document Server

    Gülich, Johann Friedrich

    2014-01-01

    This book gives an unparalleled, up-to-date, in-depth treatment of all kinds of flow phenomena encountered in centrifugal pumps including the complex interactions of fluid flow with vibrations and wear of materials. The scope includes all aspects of hydraulic design, 3D-flow phenomena and partload operation, cavitation, numerical flow calculations, hydraulic forces, pressure pulsations, noise, pump vibrations (notably bearing housing vibration diagnostics and remedies), pipe vibrations, pump characteristics and pump operation, design of intake structures, the effects of highly viscous flows, pumping of gas-liquid mixtures, hydraulic transport of solids, fatigue damage to impellers or diffusers, material selection under the aspects of fatigue, corrosion, erosion-corrosion or hydro-abrasive wear, pump selection, and hydraulic quality criteria. As a novelty, the 3rd ed. brings a fully analytical design method for radial impellers, which eliminates the arbitrary choices inherent to former design procedures. The d...

  5. Centrifugal reciprocating compressor

    Science.gov (United States)

    High, W. H.

    1980-01-01

    Efficient compressor uses centrifugal force to compress gas. System incorporates two coupled dc motors, each driving separate centrifugal reciprocating-compressor assembly. Motors are synchronized to accelerate and decelerate alternately.

  6. Enrichment: centrifuge process

    International Nuclear Information System (INIS)

    This short course is divided into three sections devoted respectively to the physics of the process, some practical problems raised by the design of a centrifuge and the present situation of centrifugation in the World. 31 figs., 18 refs

  7. CENTRIFUGE END CAP

    Science.gov (United States)

    Beams, J.W.; Snoddy, L.B.

    1960-08-01

    An end cap for ultra-gas centrifuges is designed to impart or remove angular momentum to or from the gas and to bring the entering gas to the temperature of the gas inside the centrifuge. The end cap is provided with slots or fins for adjusting the temperature and the angular momentum of the entering gas to the temperature and momentum of the gas in the centrifuge and is constructed to introduce both the inner and the peripheral stream into the centrifuge.

  8. Centrifuge modeling of monopiles

    DEFF Research Database (Denmark)

    Klinkvort, Rasmus Tofte

    To gain a larger knowledge of the monopile foundation concept, centrifuge modeling is used by the geotechnical group at DTU. The centrifuge operated at DTU is a beam centrifuge and was built in 1976. In the recent years it has been upgraded with onboard data acquisition and control systems. The...... capabilities of the centrifuge at DTU makes it possible to obtain a scale factor of 85 in experiments which equals a soil volume in prototype scale of a diameter of 40 meters and a depth of 40 meters. This paper describes centrifuge modeling theory, the centrifuge setup at DTU and as an example show results...... from centrifuge tests performed on large diameter piles installed in dry sand....

  9. RESEARCH CENTRIFUGE- ADVANCED TOOL SEPERATION

    OpenAIRE

    Mahajan Ashwini; Prof. B.V. Jain; Dr Surajj Sarode

    2015-01-01

    A centrifuge is a critical piece of equipment for the laboratory. Purpose of this study was to study research centrifuge in detail, its applications, uses in different branches and silent features. Their are two types of research centrifuge study here revolutionary research centrifuge and microprocessor research centrifuge. A centrifuge is a device that separates particles from a solution through use of a rotor. In biology, the particles are usually cells, sub cellular organelles, or large mo...

  10. DESIGN INFORMATION REPORT: CENTRIFUGES

    Science.gov (United States)

    In the 1960s, manufacturers began to design centrifuges specifically for wastewater sludge applications. In addition, sludge thickening and dewatering processes were improved with the introduction of polyelectrolytes for chemical sludge conditioning. The report contains a brief d...

  11. Centrifugal casting process

    International Nuclear Information System (INIS)

    Centrifugal casting is not one of the most common metalforming techniques, but there are a few applications of great value, for example in gas cooled reactors. In this article a few examples of these applications are discussed

  12. Geotechnical centrifuge under construction

    Science.gov (United States)

    Richman, Barbara T.

    Modifications are underway at the National Aeronautics and Space Administration (NASA) Ames Research Center in California to transform a centrifuge used in the Apollo space program to the largest geotechnical centrifuge in the free world. The centrifuge, to be finished in August and opened next January, following check out and tuning, will enable geoscientists to model stratigraphic features down to 275 m below the earth's surface. Scientists will be able to model processes that are coupled with body force loading, including earthquake response of earth structures and soil structure interaction; rubbled-bed behavior during in situ coal gasification or in oil shale in situ retorts; behavior of frozen soil; frost heave; behavior of offshore structures; wave-seabed interactions; explosive cratering; and blast-induced liquefaction.The centrifuge will have a load capacity of 900-g-tons (short); that is, it will be able to carry a net soil load of 3 short tons to a centripetal acceleration of 300 times the acceleration caused by gravity. Modified for a total cost of $2.4 million, the centrifuge will have an arm with a 7.6-m radius and a swinging platform or bucket at its end that will be able to carry a payload container measuring 2.1×2.1 m. An additional future input of $500,000 would enable the purchase of a larger bucket that could accommodate a load of up to 20 tons, according to Charles Babendreier, program director for geotechnical engineering at the National Science Foundation. Additional cooling for the motor would also be required. The centrifuge has the capability of accelerating the 20-ton load to 100 g.

  13. Perceived radial translation during centrifugation

    NARCIS (Netherlands)

    Bos, J.E.; Correia Grácio, B.J.

    2015-01-01

    BACKGROUND: Linear acceleration generally gives rise to translation perception. Centripetal acceleration during centrifugation, however, has never been reported giving rise to a radial, inward translation perception. OBJECTIVE: To study whether centrifugation can induce a radial translation percepti

  14. Central centrifugal cicatricial alopecia

    OpenAIRE

    Collin Blattner; Dennis C Polley; Frank Ferritto; Elston, Dirk M

    2013-01-01

    Central centrifugal cicatricial alopecia is a common cause of progressive permanent apical alopecia. This unique form of alopecia includes entities previously know as “hot comb alopecia,” “follicular degeneration syndrome,” “pseudopelade” in African Americans and “central elliptical pseudopelade” in Caucasians. The etiology appears to be multifactorial and the condition occurs in all races.

  15. Centrifugal analyzer development

    International Nuclear Information System (INIS)

    The development of the centrifuge fast analyzer (CFA) is reviewed. The development of a miniature CFA with computer data analysis is reported and applications for automated diagnostic chemical and hematological assays are discussed. A portable CFA system with microprocessor was adapted for field assays of air and water samples for environmental pollutants, including ammonia, nitrates, nitrites, phosphates, sulfates, and silica. 83 references

  16. Centrifugally decoupling touchdown bearings

    Science.gov (United States)

    Post, Richard F

    2014-06-24

    Centrifugally decoupling mechanical bearing systems provide thin tensioned metallic ribbons contained in a support structure. This assembly rotates around a stationary shaft being centered at low speeds by the action of the metal ribbons. Tension springs are connected on one end to the ribbons and on the other end to the support structure. The ribbons pass through slots in the inner ring of the support structure. The spring preloading thus insures contact (or near-contact) between the ribbons and the shaft at rotation speeds below the transition speed. Above this speed, however, the centrifugal force on the ribbons produces a tensile force on them that exceeds the spring tensile force so that the ribbons curve outward, effectively decoupling them from mechanical contact with the shaft. They still remain, however, in position to act as a touchdown bearing in case of abnormally high transverse accelerations.

  17. Performance in Centrifugal Compressors

    Directory of Open Access Journals (Sweden)

    K. Sato

    1999-01-01

    Full Text Available A 3-D unsteady thin-layer Navier-Stokes code has been used to calculate the flow through a centrifugal compressor stage. The validation of the code for steady flows in centrifugal compressors was conducted for the Krain’s impeller with a vaneless diffuser as a test case and the numerical results were compared with the experimental results. The predicted flow field and performance agreed well with the experimental data. An unsteady stage solution was then conducted with this impeller followed by a generic low-solidity vaned-diffuser to examine the unsteady effects on the impeller performance. The computational results showed a stabilising effect of the blade row interaction.

  18. Manufacture of centrifugal Castings

    OpenAIRE

    Minář, Martin

    2015-01-01

    The main goal of this bachelor thesis is to collect basic information related to the production of castings by centrifugal casting. It is focused on horizontal and vertical centrigugal casting, casting of various metals and their alloys, such as zinc, aluminum, iron, steel and silumin. This technology is compared with other casting methods in terms of specific characteristics, amount of usage, production economics, advantages, disadvantages, the resulting quality of castings and other factors.

  19. Oscillatory counter-centrifugation

    Science.gov (United States)

    Xu, Shujing; Nadim, Ali

    2016-02-01

    In ordinary centrifugation, a suspended particle that is heavier than the displaced fluid migrates away from the rotation axis when the fluid-filled container rotates steadily about that axis. In contrast a particle that is lighter than the displaced fluid (e.g., a bubble) migrates toward the rotation axis in a centrifuge. In this paper, we show theoretically that if a fluid-filled container rotates in an oscillatory manner as a rigid body about an axis, at high enough oscillation frequencies, the sense of migration of suspended particles is reversed. That is, in that case particles denser than the fluid migrate inward, while those that are lighter than the fluid move outward. We term this unusual phenomenon "Oscillatory Counter-Centrifugation" or OCC, for short. Through application of the method of averaging to the equations of motion, we derive a simple criterion to predict the occurrence of OCC. The analysis also reveals that the time-average of the Coriolis force in the radial direction is the term that is responsible for this effect. In addition, we analyze the effects of the Basset history force and the Rubinow-Keller lift force on particle trajectories and find that OCC persists even when these forces are active. The phenomenon awaits experimental verification.

  20. Gas Centrifuges and Nuclear Proliferation

    Energy Technology Data Exchange (ETDEWEB)

    Albright, David

    2004-09-15

    Gas centrifuges have been an ideal enrichment method for a wide variety of countries. Many countries have built gas centrifuges to make enriched uranium for peaceful nuclear purposes. Other countries have secretly sought centrifuges to make highly enriched uranium for nuclear weapons. In more recent times, several countries have secretly sought or built gas centrifuges in regions of tension. The main countries that have been of interest in the last two decades have been Pakistan, Iraq, Iran, and North Korea. Currently, most attention is focused on Iran, Pakistan, and North Korea. These states did not have the indigenous abilities to make gas centrifuges, focusing instead on illicit and questionable foreign procurement. The presentation covered the following main sections: Spread of centrifuges through illicit procurement; Role of export controls in stopping proliferation; Increasing the transparency of gas centrifuge programs in non-nuclear weapon states; and, Verified dismantlement of gas centrifuge programs. Gas centrifuges are important providers of low enriched uranium for civil nuclear power reactors. They also pose special nuclear proliferation risks. We all have special responsibilities to prevent the spread of gas centrifuges into regions of tension and to mitigate the consequences of their spread into the Middle East, South Asia, and North Asia.

  1. Autocontrol technique of combined centrifuges

    International Nuclear Information System (INIS)

    The design characteristic of the autocontrol technique of the combined centrifuge is introduced. Digital technique, vary structure control and interface technique, graphical display techniques, digital communication technique as well as electronic technique are applied in the course of research. Automation in the operation of large scale combined centrifuges and the course of combined test has been realized and it can coordinate with other systems of status monitoring, data collecting and centrifugal force-aerodynamic force matched load automatically

  2. Centrifugal-reciprocating compressor

    Science.gov (United States)

    Higa, W. H. (Inventor)

    1984-01-01

    A centrifugal compressor is described which includes at least one pair of cylinders arranged in coaxial alignment and supported for angular displacement about a common axis of rotation normally disecting a common longitudinal axis of symmetry for the cylinders. The cylinders are characterized by ported closures located at the mutually remote ends thereof through which the cylinders are charged and discharged, and a pair of piston heads seated within the cylinders and supported for floating displacement in compressive strokes in response to unidirectional angular displacement imparted to the cylinders.

  3. Centrifugal bucket hoist

    OpenAIRE

    Kotačka, Petr

    2014-01-01

    This bachelor thesis deals with an engineering design of a centrifugal bucket elevator with transport height 6.5 metres and transport performance 40 000 kilograms per hour. The thesis focuses especially on a functional calculation of the elevator thanks to which a gear motor, band and bucket are chosen. This is followed by an analysis of a constructional solution with a strength check of a drive shaft and parallel keys as well as a calculation of a service life of bearings. Technical document...

  4. Centrifugal shot blast system

    International Nuclear Information System (INIS)

    This report describes a demonstration of Concrete cleaning, Inc., modified centrifugal shot blast technology to remove the paint coating from concrete flooring. This demonstration is part of the Chicago Pile-5 (CP-5) Large-Scale Demonstration Project (LSDP) sponsored by the US Department of Energy (DOE), office of Science and Technology (OST), Deactivation and Decommissioning Focus Area (DDFA). The objective of the LSDP is to select and demonstrate potentially beneficial technologies at the Argonne National Laboratory-East (ANL) CP-5 Research Reactor. The purpose of the LSDP is to demonstrate that using innovative and improved decontamination and decommissioning (D and D) technologies from various sources can result in significant benefits, such as decreased cost and increased health and safety, as compared with baseline D and D technologies. Potential markets exist for the innovative centrifugal shot blast system at the following sites: Fernald Environmental Management Project, Los Alamos, Nevada, Oak Ridge Y-12 and K-25, Paducah, Portsmouth Gaseous Diffusion site, and the Savannah River Site. This information is based on a revision to the OST Linkage Tables dated August 4, 1997

  5. Rat growth during chronic centrifugation

    Science.gov (United States)

    Pitts, G. C.; Oyama, J.

    1978-01-01

    Female weanling rats were chronically centrifuged at 4.15 G with controls at terrestrial gravity. Samples were sacrificed for body composition studies at 0, 28, 63, 105 and 308 days of centrifugation. The centrifuged group approached a significantly lower mature body mass than the controls (251 and 318g) but the rate of approach was the same in both groups. Retirement to 1G on the 60th day resulted in complete recovery. Among individual components muscle, bone, skin, CNS, heart, kidneys, body water and body fat were changed in the centrifuged group. However, an analysis of the growth of individual components relative to growth of the total fat-free compartment revealed that only skin (which increased in mass) was responding to centrifugation per se.

  6. Unshrouded Centrifugal Turbopump Impeller

    Science.gov (United States)

    Prueger, George; Williams, Morgan; Chen, Wei; Paris, John; Stewart, Eric; Williams, Robert

    1999-01-01

    The ratio of rocket engine thrust to weight is a limiting constraint in placing more payload into orbit at a low cost. A key component of an engine's overall weight is the turbopump weight, Reducing the turbopump weight can result in significant engine weight reduction and hence, increased delivered payload. There are two main types of pumps: centrifugal and axial pumps. These types of pumps can be further sub-divided into those with shrouds and those without shrouds (unshrouded pumps). Centrifugal pumps can achieve the same pump discharge pressure as an axial pump and it requires fewer pump stages and lower pump weight than an axial pump. Also, with unshrouded centrifugal pumps (impeller), the number of stages and weight can be further reduced. However. there are several issues with regard to using an unshrouded impeller: 1) there is a pump performance penalty due to the front open face recirculation flow; 2) there is a potential pump axial thrust problem from the unbalanced front open face and the back shroud face; and, 3) since test data is very linu'ted for this configuration, there is uncertainty in the magnitude and phase of the rotordynamics forces due to the front impeller passage. The purpose of the paper is to discuss the design of an unshrouded impeller and to examine the design's hydrodynamic performance, axial thrust, and rotordynamics performance. The design methodology will also be discussed. This work will help provide some guidelines for unshrouded impeller design. In particular, the paper will discuss the design of three unshrouded impellers - one with 5 full and 5 partial blades (5+5). one with 6+6 blades and one with 8+8 blades. One of these designs will be selected for actual fabrication and flow test. Computational fluid dynamics (CFD) is used to help design and optimize the unshrouded impeller. The relative pump performance penalty is assessed by comparing the CFD results of the unshrouded impeller with the equivalent shrouded impeller for a

  7. Microwave assisted centrifuge and related methods

    Science.gov (United States)

    Meikrantz, David H [Idaho Falls, ID

    2010-08-17

    Centrifuge samples may be exposed to microwave energy to heat the samples during centrifugation and to promote separation of the different components or constituents of the samples using a centrifuge device configured for generating microwave energy and directing the microwave energy at a sample located in the centrifuge.

  8. Uranium enrichment by gas centrifuge

    International Nuclear Information System (INIS)

    After recalling the physical principles and the techniques of centrifuge enrichment the report describes the centrifuge enrichment programmes of the various countries concerned and compares this technology with other enrichment technologies like gaseous diffusion, laser, aerodynamic devices and chemical processes. The centrifuge enrichment process is said to be able to replace with advantage the existing enrichment facilities in the short and medium term. Future prospects of the process are also described, like recycled uranium enrichment and economic improvements; research and development needs to achieve the economic prospects are also indicated. Finally the report takes note of the positive aspect of centrifuge enrichment as far as safeguards and nuclear safety are concerned. 27 figs, 113 refs

  9. Gas centrifugal separator

    International Nuclear Information System (INIS)

    Object: To enhance separating performance by jointly using separating action of impulse wave without increasing peripheral speed of a gas centrifugal separator and lengthening a cylindrical portion thereof. Structure: A mixed gas is introduced into a rotating cylinder from a mixed gas pipe and is separated into gas rich in light component and gas decreased in light component, these gases being taken outside the rotating cylinder through a product opening and a fixed waste pipe, respectively. A fixed product recycling pipe is disposed between an upper end plate and an upper buffer plate of the rotating cylinder the recycling pipe having an opening formed at the leading end so as to oppose to the rotating mixed gas, and the gas introduced from the opening is re-introduced into the central portion of the rotating cylinder for recirculation. A waste pipe is disposed between a lower end plate and a lower buffer plate of the rotating cylinder, and the gas not introduced into the opening of the waste pipe is circulated within the rotating cylinder. (Kamimura, M.)

  10. Centrifugal Compressor Aeroelastic Analysis Code

    Science.gov (United States)

    Keith, Theo G., Jr.; Srivastava, Rakesh

    2002-01-01

    Centrifugal compressors are very widely used in the turbomachine industry where low mass flow rates are required. Gas turbine engines for tanks, rotorcraft and small jets rely extensively on centrifugal compressors for rugged and compact design. These compressors experience problems related with unsteadiness of flowfields, such as stall flutter, separation at the trailing edge over diffuser guide vanes, tip vortex unsteadiness, etc., leading to rotating stall and surge. Considerable interest exists in small gas turbine engine manufacturers to understand and eventually eliminate the problems related to centrifugal compressors. The geometric complexity of centrifugal compressor blades and the twisting of the blade passages makes the linear methods inapplicable. Advanced computational fluid dynamics (CFD) methods are needed for accurate unsteady aerodynamic and aeroelastic analysis of centrifugal compressors. Most of the current day industrial turbomachines and small aircraft engines are designed with a centrifugal compressor. With such a large customer base and NASA Glenn Research Center being, the lead center for turbomachines, it is important that adequate emphasis be placed on this area as well. Currently, this activity is not supported under any project at NASA Glenn.

  11. Hyperbolically Shaped Centrifugal Compressor

    Institute of Scientific and Technical Information of China (English)

    Romuald Puzyrewski; Pawel Flaszy(n)ski

    2003-01-01

    Starting from the classical centrifugal compressor, cone shaped in meridional cross section, two modifications are considered on the basis of results from 2D and 3D flow models. The first modification is the change of the meridional cross section to hyperbolically shaped channel. The second modification, proposed on the basis of 2D axisymmetric solution, concerns the shape of blading. On the strength of this solution the blades are formed as 3D shaped blades, coinciding with the recent tendency in 3D designs. Two aims were considered for the change of meridional compressor shape. The first was to remove the separation zone which appears as the flow tums from axial to radial direction. The second aim is to uniformize the flow at exit of impeller. These two goals were considered within the frame of 2D axisymmetric model. Replacing the cone shaped compressor by a hyperbolically shaped one, the separation at the corner was removed. The disc and shroud shape of the compressor was chosen in the way which satisfies the condition of most uniform flow at the compressor exit. The uniformity of exit flow from the rotor can be considered as the factor which influences the performance of the diffuser following the rotor. In the 2D model a family of stream surfaces of S1 type is given in order to find S2 surfaces which may be identified with the midblade surfaces of compressor blading. A computation of 3D type has been performed in order to establish the relations between 2D and 3D models in the calculation of flow parameters. In the presented example the 2D model appears as the inverse model which leads to 3D shape of blading whereas the 3D model has been used for the direct solution. In the presented example the confrontation of two models, 2D and 3D, leads to a better understanding of the application of these models to the design procedure.

  12. Centrifugal slip casting of components

    International Nuclear Information System (INIS)

    Research in layered and functionally gradient materials has emerged because of the increasing demand for high-performance engineering materials. Many techniques have been used to produce layered and functionally gradient components. Common examples include thermal spray processing, powder processing, chemical and physical vapor deposition, high-temperature or combustion synthesis, diffusion treatments, microwave processing and infiltration. Of these techniques, powder processing routes offer excellent microstructural control and product quality, and they are capable of producing large components. Centrifugal slip casting is a powder-processing technique combining the effects of slip casting and centrifugation. In slip casting, consolidation takes place as fluid is removed by the porous mold. Particles within the slip move with the suspending fluid until reaching the mold wall, at which point they are consolidated. In centrifugation, particles within the slip move through the fluid at a rate dependent upon the gravitational force and particle drag

  13. Physical simulations using centrifuge techniques

    International Nuclear Information System (INIS)

    Centrifuge techniques offer a technique for doing physical simulations of the long-term mechanical response of deep ocean sediment to the emplacement of waste canisters and to the temperature gradients generated by them. Preliminary investigations of the scaling laws for pertinent phenomena indicate that the time scaling will be consistent among them and equal to the scaling factor squared. This result implies that this technique will permit accelerated-life-testing of proposed configurations; i.e, long-term studies may be done in relatively short times. Presently, existing centrifuges are being modified to permit scale model testing. This testing will start next year

  14. Centrifugation and the Manhattan Project

    Science.gov (United States)

    Reed, Cameron

    2009-05-01

    A study of U. S. Army Manhattan Engineer District documents reveals that consideration of centrifugation as a means of uranium enrichment during World War II was considerably more extensive than is commonly appreciated. By the time the centrifuge project was abandoned in early 1944 a full-scale prototype unit had been fabricated and tested at near-production speeds, enrichments of close to theoretically-expected levels had been demonstrated with pilot-plant units, and plans for production plants had been developed. This paper will review the history of this little-known aspect of the Project and examine the circumstances of how it came to be discontinued.

  15. Centrifugally cast for top performance

    International Nuclear Information System (INIS)

    Centrifugally cast nickel-chromium alloy components, supplied by Fahralloy-Wisconsin Ltd. are being used for the lattice tubes in CANDU reactors. Horizontal centrifugal casting facilities enable tubular shapes to be made with outside diameters of 3 to 23 in.; lengths of up to 162 in. A unique feature of horizontal casting is that the mechanical properties are the same in all directions. The structure is also completely homogeneous and combines characteristically high resistance to heat and corrosion with enhanced physical and mechanical properties. (R.A.)

  16. Empirical Design Considerations for Industrial Centrifugal Compressors

    OpenAIRE

    Cheng Xu; Amano, Ryoichi S.

    2012-01-01

    Computational Fluid Dynamics (CFD) has been extensively used in centrifugal compressor design. CFD provides further optimisation opportunities for the compressor design rather than designing the centrifugal compressor. The experience-based design process still plays an important role for new compressor developments. The wide variety of design subjects represents a very complex design world for centrifugal compressor designers. Therefore, some basic information for centrifugal design is still ...

  17. Performance of a Centrifugal Slurry Pump

    OpenAIRE

    Hawas Yahya Bajawi; Basharat Salim; Ziyadh Suhibani

    2014-01-01

    The aim of this study was to experimentally investigate the effect of speed, concentration and size of slurry on the performance of a centrifugal pump. For this purpose a facility was built where the performance of a centrifugal slurry pump was examined using aggregate slurry. Three sizes of slurry with three concentrations and at three impeller speeds were used for the performance investigations of a centrifugal slurry pump. As a reference performance the performance of centrifugal slurry pu...

  18. Laser and gas centrifuge enrichment

    Energy Technology Data Exchange (ETDEWEB)

    Heinonen, Olli [Senior Fellow, Belfer Center for Science and International Affairs, Harvard Kennedy School, Cambridge, Massachusetts (United States)

    2014-05-09

    Principles of uranium isotope enrichment using various laser and gas centrifuge techniques are briefly discussed. Examples on production of high enriched uranium are given. Concerns regarding the possibility of using low end technologies to produce weapons grade uranium are explained. Based on current assessments commercial enrichment services are able to cover the global needs of enriched uranium in the foreseeable future.

  19. Laser and gas centrifuge enrichment

    Science.gov (United States)

    Heinonen, Olli

    2014-05-01

    Principles of uranium isotope enrichment using various laser and gas centrifuge techniques are briefly discussed. Examples on production of high enriched uranium are given. Concerns regarding the possibility of using low end technologies to produce weapons grade uranium are explained. Based on current assessments commercial enrichment services are able to cover the global needs of enriched uranium in the foreseeable future.

  20. CENTRIFUGAL CASTING OF ANTIFRICTION SILUMIN

    OpenAIRE

    V. Ju. Stetsenko; A. I. Rivkin; A. P. Gutev

    2016-01-01

    It is shown that the way of centrifugal casting into water-cooled mould with vertical rotation axis enables to receive hollow slugs with diameter 100–250 mm, with height under 200 mm with wall thickness under 15 mm of antifriction silumin АК15М3, which will replace expensive antifriction bronze.

  1. CENTRIFUGAL CASTING OF ANTIFRICTION SILUMIN

    Directory of Open Access Journals (Sweden)

    V. Ju. Stetsenko

    2016-02-01

    Full Text Available It is shown that the way of centrifugal casting into water-cooled mould with vertical rotation axis enables to receive hollow slugs with diameter 100–250 mm, with height under 200 mm with wall thickness under 15 mm of antifriction silumin АК15М3, which will replace expensive antifriction bronze.

  2. Centrifugal pumps for rocket engines

    Science.gov (United States)

    Campbell, W. E.; Farquhar, J.

    1974-01-01

    The use of centrifugal pumps for rocket engines is described in terms of general requirements of operational and planned systems. Hydrodynamic and mechanical design considerations and techniques and test procedures are summarized. Some of the pump development experiences, in terms of both problems and solutions, are highlighted.

  3. Continuous-Flow Centrifugal Separator

    Science.gov (United States)

    Waldron, Robert D.

    1988-01-01

    Apparatus combines principles of centrifugal and cyclone separators to control movement of solid or liquid particles suspended in flowing gas. Spinning disk contains radial channels, width varys as function of distance from center. Gas flows from outer ring around disk toward center. Particles in gas collected at periphery, center or both.

  4. Centrifuge facilities at Technical University of Denmark

    DEFF Research Database (Denmark)

    Leth, Caspar Thrane; Krogsbøll, Anette Susanne; Hededal, Ole

    2008-01-01

    The geotechnical group at the Danish Technical University (DTU) operates a geotechnical beam centrifuge. The centrifuge was build in 1976 and has been upgraded through the years, latest with onboard data and control systems. The centrifuge concept involves an increased gravity field in which...... the physical model is placed and tested. The capabilities of the centrifuge at DTU makes it possible to obtain a scale factor of 75-85 in the tests which equals a soil volume in prototype scale of ø40m and a depth of 36 m. The centrifuge facilities at DTU have through the years been used for testing various...

  5. Centrifugal separator devices, systems and related methods

    Science.gov (United States)

    Meikrantz, David H.; Law, Jack D.; Garn, Troy G.; Todd, Terry A.; Macaluso, Lawrence L.

    2012-03-20

    Centrifugal separator devices, systems and related methods are described. More particularly, fluid transfer connections for a centrifugal separator system having support assemblies with a movable member coupled to a connection tube and coupled to a fixed member, such that the movable member is constrained to movement along a fixed path relative to the fixed member are described. Also, centrifugal separator systems including such fluid transfer connections are described. Additionally, methods of installing, removing and/or replacing centrifugal separators from centrifugal separator systems are described.

  6. Physical simulations using centrifuge techniques

    International Nuclear Information System (INIS)

    Centrifuge techniques offer a method for doing physical simulations of the long-term mechanical response of deep ocean sediment to the emplacement of waste canisters and to the temperature gradients generated by them. Theoretical investigations of the scaling laws for pertinent phenomena indicate that the time scaling will be consistent among them and equal to the scaling factor squared. This result implies that this technique will permit accelerated-life-testing or proposed configurations; i.e., long-term studies may be done in relatively short times. Medium-scale simulation experiments that are designed to investigate the mechanical response of the sediment are currently in progress. Large-scale simulations can be started in the near future with the completion of the modifications to the Sandia-25 centrifuge

  7. Method of operating centrifugal clarifier

    International Nuclear Information System (INIS)

    The present invention concerns a method of operating a centrifugal clarifier for spent nuclear fuel reprocessing. That is, clarified liquid containing useful ingredients dissolved therein and sludge ingredients are separated centrifugally by rotating a bottom-opened cylindrical bawl. In this case, the rotation of the cylindrical bawl is stopped to discharge and recover the clarified liquid remaining in the bawl from the bottom thereof. Further, sludge deposition layers are left in the bawl and they are rinsed to recover the useful ingredients. With this method, it is possible to reduce the amount of the rinsing liquid used as compared with the conventional method and also shorten the rinsing operation time compared with the conventional method. Furthermore, since useful ingredients contained in the sludge depositions, for example, U and Pu solutions can be recovered, their losses can be reduced remarkably. (I.S.)

  8. Centrifuge pellet injector for JET

    International Nuclear Information System (INIS)

    An engineering design of a centrifuge pellet injector for JET is reported as part of the Phase I contract number JE 2/9016. A rather detailed design is presented for the mechanical and electronic features. Stress calculations, dynamic behaviour and life estimates are considered. The interfaces to the JET vacuum system and CODAS are discussed. Proposals for the pellet diagnostics (velocity, mass and shape) are presented. (orig.)

  9. Centrifugal pumps and allied machinery

    CERN Document Server

    Anderson, HH

    1994-01-01

    This book will be of vital interest to all engineers and designers concerned with centrifugal pumps and turbines. Including statistical information derived from 20000 pumps and 700 turbines with capacities of 5gpm to 5000000gpm, this book offers the widest range and scope of information currently available. Statistical analyses suggest practical methods of increasing pump performance and provide valuable data for new design aspects.

  10. Twinning of amphibian embryos by centrifugation

    Science.gov (United States)

    Black, S. D.

    1984-01-01

    In the frog Xenopus laevis, the dorsal structures of the embryonic body axis normally derive from the side of the egg opposite the side of sperm entry. However, if the uncleaved egg is inclined at lg or centrifuged in an inclined position, this topographic relationship is overridden: the egg makes its dorsal axial structures according to its orientation in the gravitational/centrifugal field, irrespective of the position of sperm entry. Certain conditions of centrifugation cause eggs to develop into conjoined twins with two sets of axial structures. A detailed analysis of twinning provided some insight into experimental axis orientation. First, as with single-axis embryos, both axes in twins are oriented according to the direction of centrifugation. One axis forms at the centripetal side of the egg and the other forms at the centrifugal side, even when the side of sperm entry is normal to the centrifugal force vector. Second, if eggs are centrifuged to give twins, but are inclined at lg to prevent post-centrifugation endoplasmic redistributions, only single-axis embryos develop. Thus, a second redistribution is required for high-frequency secondary axis formation. This can be accomplished by lg (as in the single centrifugations) or by a second centrifugation directed along the egg's animal-vegetal axis.

  11. Empirical Design Considerations for Industrial Centrifugal Compressors

    Directory of Open Access Journals (Sweden)

    Cheng Xu

    2012-01-01

    Full Text Available Computational Fluid Dynamics (CFD has been extensively used in centrifugal compressor design. CFD provides further optimisation opportunities for the compressor design rather than designing the centrifugal compressor. The experience-based design process still plays an important role for new compressor developments. The wide variety of design subjects represents a very complex design world for centrifugal compressor designers. Therefore, some basic information for centrifugal design is still very important. The impeller is the key part of the centrifugal stage. Designing a highly efficiency impeller with a wide operation range can ensure overall stage design success. This paper provides some empirical information for designing industrial centrifugal compressors with a focus on the impeller. A ported shroud compressor basic design guideline is also discussed for improving the compressor range.

  12. CFD simulation of centrifugal cells washers.

    Science.gov (United States)

    Kellet, Beth E; Binbing, Han; Dandy, David S; Wickramasinghe, S Ranil

    2004-01-01

    The feasibility of using computational fluid dynamics to guide the design of better centrifuges for processing shed blood is explored here. The velocity field and the rate of protein removal from the shed blood have been studied. The results indicate that computational fluid dynamics could help screen preliminary centrifuge bowl designs thus reducing the number of initial experimental tests required when developing new centrifuge bowls. Though the focus of this work is on washing shed blood the methods developed here are applicable to the design of centrifuge bowls for other blood processing applications. PMID:15133962

  13. Magnetic-fluid-based smart centrifugal switch

    International Nuclear Information System (INIS)

    A new type of centrifugal switch, which we call 'smart centrifugal switch' is designed and developed utilizing the novel properties of magnetic fluid. No mechanical movement is involved in the sensing and switching operations of this centrifugal switch and both these operations are achieved in a smart way. The performance of the switch is studied. This switch has several important advantages over conventional centrifugal switches like smart and non-contact type operation, sparkless and hence explosion proof working and inertia-less simple structure

  14. Cavitation Effects in Centrifugal Pumps- A Review

    Directory of Open Access Journals (Sweden)

    Maxime Binama

    2016-05-01

    Full Text Available Cavitation is one of the most challenging fluid flow abnormalities leading to detrimental effects on both the centrifugal pump flow behaviors and physical characteristics. Centrifugal pumps’ most low pressure zones are the first cavitation victims, where cavitation manifests itself in form of pitting on the pump internal solid walls, accompanied by noise and vibration, all leading to the pump hydraulic performance degradation. In the present article, a general description of centrifugal pump performance and related parameters is presented. Based on the literature survey, some light were shed on fundamental cavitation features; where different aspects relating to cavitation in centrifugal pumps were briefly discussed

  15. Virgin Coconut Oil Production by Centrifugation Method

    Directory of Open Access Journals (Sweden)

    Y.C.Wong

    2014-03-01

    Full Text Available The virgin coconut oil (VCO production by centrifugation method was studied. The production of VCO was studied by using various centrifugation speed, temperature and time intervals. The results showed that the yield of VCO was 13.53% at 12000rpm, at 120 minutes. The highest yield of VCO was 13.80% at centrifugation temperature of 40oC. The concentration of lauric acid present in the samples with variables of centrifugation temperatures, speed, and time intervals were 0.4543µg, 6.2367µg, and 6.4894µg respectively.

  16. ORNL centrifuge pellet fueling system

    International Nuclear Information System (INIS)

    A centrifuge pellet injecter designed and built at Oak Ridge National Laboratory (ORNL) is in operation on Tore Supra. This injector has the capability of injecting up to 100 pellets at speeds up to 800 M/s. The solid deuterium pellets can be formed with a variable mass from 3 to 10 torr-L and are fired at a rate of up to 10 pellets per second. The experimental program that is under way combines repetitive pellet fueling with the ergodic divertor and pump limiters to establish and understand long-pulse plasmas in which the pellet fuel source is in balance with the particle exhaust. With lower hybrid current drive, pulse lengths of up to 2 min might be achieved. To prepare for these extended pulse lengths, the pellet source on the centrifuge will be extended to provide a 300- to 500-pellet capability. A similar system extended to steady-state pellet fabrication technology and designed for a radiation and tritium environment would be a candidate for a fueling system for the International Thermonuclear Experimental Reactor (ITER). Analysis of pellet-fueled ITER discharges using the WHIST code shows the potential for controlling the radial fuel deposition point to achieve the desired core density while maintaining the edge density and temperatures so as to minimize the diverter plate erosion. A centrifuge fueling system would have the capability of taking the D-T exhaust directly from the cryopumping systems, recondensing and purifying the fuel, and injecting the reconstituted pellets into the plasma, thereby minimizing the tritium inventory

  17. CENTRIFUGES

    Science.gov (United States)

    Beams, J.W.; Snoddy, L.B.

    1960-08-01

    Damping bearings for use on the shafts of an ultracentrifuge were designed which are capable of passing through critical angular speeds. The shaft extending from one end of the rotor is journaled in fixed-plain bearings mounted on annular resilient shock-absorbing elements to dampen small vibrations. The shaft at the other end of the rotor is journaled in two damper-bearing assemblies which are so spaced on the shaft that a vibration node can at no time exist at both bearing assemblies. These bearings are similar to the other bearings except that the bearing housings are slidably mounted on the supporting structure for movement transverse to the rotational axis of the rotor.

  18. Solid deuterium centrifuge pellet injector

    International Nuclear Information System (INIS)

    Pellet injectors are needed to fuel long pulse tokamak plasmas and other magnetic confinement devices. For this purpose, an apparatus has been developed that forms 1.3-mm-diam pellets of frozen deuterium at a rate of 40 pellets per second and accelerates them to a speed of 1 km/s. Pellets are formed by extruding a billet of solidified deuterium through a 1.3-mm-diam nozzle at a speed of 5 cm/s. The extruding deuterium is chopped with a razor knife, forming 1.3-mm right circular cylinders of solid deuterium. The pellets are accelerated by synchronously injecting them into a high speed rotating arbor containing a guide track, which carries them from a point near the center of rotation to the periphery. The pellets leave the wheel after 1500 of rotation at double the tip speed. The centrifuge is formed in the shape of a centrifugal catenary and is constructed of high strength KEVLAR/epoxy composite. This arbon has been spin-tested to a tip speed of 1 km/s

  19. Astronaut Gordon Cooper in centrifuge for tests

    Science.gov (United States)

    1963-01-01

    Astronaut L. Gordon Cooper, prime pilot for the Mercury-Atlas 9 mission, is strapped into the gondola while undergoing tests in the centrifuge at the Naval Air Development Center, Johnsville, Pennsylvania. The centrifuge is used to investigate by simulation the pilot's capability to control the vehicle during the actual flight in its booster and reentry profile.

  20. Separation of gas mixtures by centrifugation

    Science.gov (United States)

    Park, C.; Love, W. L.

    1972-01-01

    Magnetohydrodynamic (MHD) centrifuge utilizing electric currents and magnetic fields produces a magnetic force which develops supersonic rotational velocities in gas mixtures. Device is superior to ordinary centrifuges because rotation of gas mixture is produced by MHD force rather than mechanical means.

  1. High frequency dynamics in centrifugal compressors

    NARCIS (Netherlands)

    Twerda, A.; Meulendijks, D.; Smeulers, J.P.M.; Handel, R. van den; Lier, L.J. van

    2008-01-01

    Problems with centrifugal compressors relating to high frequency, i.e. Blade passing frequency (BPF) are increasing. Pulsations and vibrations generated in centrifugal compressors can lead to nuisance, due to strong tonal noise, and even breakdown. In several cases the root cause of a failure or a n

  2. Detection methods for centrifugal microfluidic platforms

    DEFF Research Database (Denmark)

    Burger, Robert; Amato, Letizia; Boisen, Anja

    2016-01-01

    Centrifugal microfluidics has attracted much interest from academia as well as industry, since it potentially offers solutions for affordable, user-friendly and portable biosensing. A wide range of so-called fluidic unit operations, e.g. mixing, metering, liquid routing, and particle separation...... centrifugal microfluidics platform and cover optical as well as mechanical and electrical detection principles....

  3. Control system modeling of a centrifuge

    International Nuclear Information System (INIS)

    Improved control of a centrifuge can be achieved by using a mathematical model. This model is a linear, time-invariant, second order model which relates the input to the output of the centrifuge. After the Z-transform of the model was taken, a digital computer program was written to implement the model. The model parameters were optimized through correlation of the theoretical output as compared with the actual output of the centrifuge. As a result, a model was developed that simulated the centrifuge. Traditionally, a desired centrifuge output was produced by an input which was determined by trial and error. However, using the model with the desired output curve, the necessary input can be calculated with the digital computer program

  4. Design of centrifugal impeller blades

    Science.gov (United States)

    Betz, A; Flugge-Lotz, I

    1939-01-01

    This paper restricts itself to radial impellers with cylindrical blades since, as Prasil has shown, the flow about an arbitrarily curved surface of revolution may be reduced to this normal form we have chosen by a relatively simple conformal transformation. This method starts from the simple hypotheses of the older centrifugal impeller theory by first assuming an impeller with an infinite number of blades. How the flow is then modified is then investigated. For the computation of flow for a finite number of blades, the approximation method as developed by Munk, Prandtl and Birnbaum, or Glauert is found suitable. The essential idea of this method is to replace the wing by a vortex sheet and compute the flow as the field of these vortices. The shape of the blades is then obtained from the condition that the flow must be along the surface of the blade.

  5. Centrifugal membrane filtration - Task 9

    International Nuclear Information System (INIS)

    The Energy and Environmental Research Center (EERC) has teamed with SpinTek Membrane Systems, Inc., the developer of a centrifugal membrane filtration technology, to demonstrate applications for the SpinTek technology within the US Department of Energy (DOE) Environmental management (EM) Program. The technology uses supported microporous membranes rotating at high rpm, under pressure, to separate suspended and colloidal solids from liquid streams, yielding a solids-free permeate stream and a highly concentrated solids stream. This is a crosscutting technology that falls under the Efficient Separations and Processing Crosscutting Program, with potential application to tank wastes, contaminated groundwater, landfill leachate, and secondary liquid waste streams from other remediation processes, including decontamination and decommissioning systems. Membrane-screening tests were performed with the SpinTek STC-X4 static test cell filtration unit, using five ceramic membranes with different pore size and composition. Based on permeate flux, a 0.25-microm TiO2/Al2O3 membrane was selected for detailed performance evaluation using the SpinTek ST-IIL centrifugal membrane filtration unit with a surrogate tank waste solution. An extended test run of 100 hr performed on a surrogate tank waste solution showed some deterioration in filtration performance, based on flux, apparently due to the buildup of solids near the inner portion of the membrane where relative membrane velocities were low. Continued testing of the system will focus on modifications to the shear pattern across the entire membrane surface to affect improved long-term performance

  6. Centrifuge workers study. Phase II, completion report

    Energy Technology Data Exchange (ETDEWEB)

    Wooten, H.D.

    1994-09-01

    Phase II of the Centrifuge Workers Study was a follow-up to the Phase I efforts. The Phase I results had indicated a higher risk than expected among centrifuge workers for developing bladder cancer when compared with the risk in the general population for developing this same type of cancer. However, no specific agent could be identified as the causative agent for these bladder cancers. As the Phase II Report states, Phase I had been limited to workers who had the greatest potential for exposure to substances used in the centrifuge process. Phase II was designed to expand the survey to evaluate the health of all employees who had ever worked in Centrifuge Program Departments 1330-1339 but who had not been interviewed in Phase I. Employees in analytical laboratories and maintenance departments who provided support services for the Centrifuge Program were also included in Phase II. In December 1989, the Oak Ridge Associated Universities (ORAU), now known as Oak Ridge Institute for Science and Education (ORISE), was contracted to conduct a follow-up study (Phase II). Phase H of the Centrifuge Workers Study expanded the survey to include all former centrifuge workers who were not included in Phase I. ORISE was chosen because they had performed the Phase I tasks and summarized the corresponding survey data therefrom.

  7. Centrifuge workers study. Phase II, completion report

    International Nuclear Information System (INIS)

    Phase II of the Centrifuge Workers Study was a follow-up to the Phase I efforts. The Phase I results had indicated a higher risk than expected among centrifuge workers for developing bladder cancer when compared with the risk in the general population for developing this same type of cancer. However, no specific agent could be identified as the causative agent for these bladder cancers. As the Phase II Report states, Phase I had been limited to workers who had the greatest potential for exposure to substances used in the centrifuge process. Phase II was designed to expand the survey to evaluate the health of all employees who had ever worked in Centrifuge Program Departments 1330-1339 but who had not been interviewed in Phase I. Employees in analytical laboratories and maintenance departments who provided support services for the Centrifuge Program were also included in Phase II. In December 1989, the Oak Ridge Associated Universities (ORAU), now known as Oak Ridge Institute for Science and Education (ORISE), was contracted to conduct a follow-up study (Phase II). Phase H of the Centrifuge Workers Study expanded the survey to include all former centrifuge workers who were not included in Phase I. ORISE was chosen because they had performed the Phase I tasks and summarized the corresponding survey data therefrom

  8. Gas dynamics in strong centrifugal fields

    Energy Technology Data Exchange (ETDEWEB)

    Bogovalov, S.V.; Kislov, V.A.; Tronin, I.V. [National research nuclear university “MEPhI”, Kashirskoje shosse, 31,115409, Moscow (Russian Federation)

    2015-03-10

    Dynamics of waves generated by scopes in gas centrifuges (GC) for isotope separation is considered. The centrifugal acceleration in the GC reaches values of the order of 106g. The centrifugal and Coriolis forces modify essentially the conventional sound waves. Three families of the waves with different polarisation and dispersion exist in these conditions. Dynamics of the flow in the model GC Iguasu is investigated numerically. Comparison of the results of the numerical modelling of the wave dynamics with the analytical predictions is performed. New phenomena of the resonances in the GC is found. The resonances occur for the waves polarized along the rotational axis having the smallest dumping due to the viscosity.

  9. Modeling of Centrifugal Force Field and the Effect on Filling and Solidification in Centrifugal Casting

    Science.gov (United States)

    Sheng, Wenbin; Ma, Chunxue; Gu, Wanli

    2011-06-01

    Based on the steady flow in a tube, a mathematical model has been established for the consideration of centrifuging force field by combining the equations of continuity, conservation of momentum and general energy. Effects of centrifugal field on the filling and solidification are modeled by two accessional terms: centrifugal force and Chorios force. In addition, the transfer of heat by convection is considered to achieve a coupling calculation of velocity field and temperature field. The solution of pressure item is avoided by introducing the stream function ψ(x,y) and the eddy function ξ(x,y). Corresponding difference formats for the simultaneous equations of centrifugal filling, the accessional terms and the solidifying latent heat have been established by the finite difference technique. Furthermore, the centrifugal filling and solidification processes in a horizontal tube are summarized to interpret the mechanism by which internal defects are formed in centrifugal castings.

  10. Safety aspects of gas centrifuge enrichment plants

    International Nuclear Information System (INIS)

    Uranium enrichment by gas centrifuge is a commercially proven, viable technology. Gas centrifuge enrichment plant operations pose hazards that are also found in other industries as well as unique hazards as a result of processing and handling uranium hexafluoride and the handling of enriched uranium. Hazards also found in other industries included those posed by the use of high-speed rotating equipment and equipment handling by use of heavy-duty cranes. Hazards from high-speed rotating equipment are associated with the operation of the gas centrifuges themselves and with the operation of the uranium hexafluoride compressors in the tail withdrawal system. These and related hazards are discussed. It is included that commercial gas centrifuge enrichment plants have been designed to operate safely

  11. Astronaut Virgil Grissom preparing for centrifuge training

    Science.gov (United States)

    1961-01-01

    Astronaut Virgil I. (Gus) Grissom, wearing the new Mercury pressure suit, is preparing for centrifuge training. He is talking with Astronaut L. Gordon Cooper and two others before the training session.

  12. Horizontal vibrations of piles in a centrifuge

    International Nuclear Information System (INIS)

    The aim of the thesis is the study of soil dynamics for important structures like nuclear power plants, offshore platforms, dams etc. Experimental results of horizontal vibrations on a pile partially anchored in a soil scale model put into a centrifuge are presented. Mechanical similitude conditions from equilibrium equations or rheologic laws are described. After a description of testing equipment (centrifuge, electrodynamic excitator) experimental results are interpreted with a model. Non-linearities on frequency response curves are characterized

  13. CFD Simulation of Annular Centrifugal Extractors

    OpenAIRE

    Vedantam, S.; Wardle, K. E.; Tamhane, T. V.; Ranade, V. V.; Joshi, J. B.

    2012-01-01

    Annular centrifugal extractors (ACE), also called annular centrifugal contactors offer several advantages over the other conventional process equipment such as low hold-up, high process throughput, low residence time, low solvent inventory and high turn down ratio. The equipment provides a very high value of mass transfer coefficient and interfacial area in the annular zone because of the high level of power consumption per unit volume and separation inside the rotor due to the high g of cent...

  14. Towards Centrifugal Compressor Stages Virtual Testing

    OpenAIRE

    Guidotti, Emanuele

    2014-01-01

    Flow features inside centrifugal compressor stages are very complicated to simulate with numerical tools due to the highly complex geometry and varying gas conditions all across the machine. For this reason, a big effort is currently being made to increase the fidelity of the numerical models during the design and validation phases. Computational Fluid Dynamics (CFD) plays an increasing role in the assessment of the performance prediction of centrifugal compressor stages. Historically, CFD wa...

  15. Meridional Considerations of the Centrifugal Compressor Development

    OpenAIRE

    Xu, C.; Amano, R. S.

    2012-01-01

    Centrifugal compressor developments are interested in using optimization procedures that enable compressor high efficiency and wide operating ranges. Recently, high pressure ratio and efficiency of the centrifugal compressors require impeller design to pay attention to both the blade angle distribution and the meridional profile. The geometry of the blades and the meridional profile are very important contributions of compressor performance and structure reliability. This paper presents some ...

  16. Renal Response to Chronic Centrifugation in Rats

    Science.gov (United States)

    Ortiz, Rudy M.; Wang, T. J.; Corbin, B. J.; Wade, C. E.; Hargens, Alan R. (Technical Monitor)

    1996-01-01

    Previously reported effects of chronic centrifugation on renal function in mammals are contradictory. The present study was conducted as an effort to provide a comprehensive analysis of renal response to chronic centrifugation (12 days at +2 Gz). Sixteen male Sprague-Dawley rats (210-230 g) were used: eight centrifuged (EC) and eight off centrifuge controls (OCC). During centrifugation EC had lower body weight and food consumption. EC showed a decrease (72%) in water intake for the first two days (T1 and T2) followed by significant increases from T4-T6. EC urine output increased two-fold over the first four days, returning to baseline by T9. EC urea excretion was elevated on T3 through T5. Creatinine, Na(+), K(+), and osmolar excretion were lower than OCC over the last four days of the study. Assuming constant plasma osmolarity and creatinine levels, EC free water clearance (C(sub H2O)) was elevated significantly on T4 when the peak urine output was exhibited. EC also had a greater C(sub H2O) over the last four days, associated with a significantly lower osmolar clearance and GFR. The initial diuresis exhibited during centrifugation can be attributed to a reduced water resorption and increased urea excretion. This diuresis was mediated independent of changes in GFR over the first eight days. However, differences in excretion seen after eight days of centrifugation are probably GFR mediated which would imply animals established a new homeostatic setpoint by that time. Centrifugation elicites an acute alteration in fluid homeostasis followed by adaptation within a week.

  17. Finite element analysis of centrifugal impellers

    OpenAIRE

    Sham Sunder, K.

    1981-01-01

    A three-dimensional method of stress analysis using finite element techniques is presented for determining the stress distribution in centrifugal impellers. It can treat all of the three types of loading possible in an inpeller, viz centrifugal, thermal and fluid. The method has no known limitations with regards to the geometric factors such as asymnetry of disk, blade curvature, presence of a cover disk or shroud, single or double sided impeller etc. A comparison of r...

  18. Combination Of Investment And Centrifugal Casting

    Science.gov (United States)

    Creeger, Gordon A.

    1994-01-01

    Modifications, including incorporation of centrifugal casting, made in investment-casting process reducing scrap rate. Used to make first- and second-stage high-pressure-fuel-turbopump nozzles, containing vanes with thin trailing edges and other thin sections. Investment mold spun for short time while being filled, and stopped before solidification occurs. Centrifugal force drives molten metal into thin trailing edges, ensuring they are filled. With improved filling, preheat and pour temperatures reduced and solidification hastened so less hot tearing.

  19. CFD Analysis of Centrifugal Pump: A Review

    OpenAIRE

    Narayan P. Jaiswal

    2014-01-01

    The main objective of this work is to understand role of the computational fluid dynamics (CFD) technique in analyzing and predicting the performance of centrifugal pump. Computational Fluid Dynamics (CFD) is the present day state-of-art technique for fluid flow analysis. The critical review of CFD analysis of CFD analysis of centrifugal pump along with future scope for further improvement is presented in this paper. Different solver like ANSYS-CFX, FLUENT etc can be used for ...

  20. Return Vane Installed in Multistage Centrifugal Pump

    OpenAIRE

    Miyano, Masafumi; Kanemoto, Toshiaki; Kawashima, Daisuke; Wada, Akihiro; Hara, Takashi; Sakoda, Kazuyuki

    2008-01-01

    To optimize the stationary components in the multistage centrifugal pump, the effects of the return vane profile on the performances of the multistage centrifugal pump were investigated experimentally, taking account of the inlet flow conditions for the next stage impeller. The return vane, whose trailing edge is set at the outer wall position of the annular channel downstream of the vane and which discharges the swirl-less flow, gives better pump performances. By equipping such return vane w...

  1. Small-sized centrifugal extractors

    International Nuclear Information System (INIS)

    Small-sized centrifugal extractors (E) and small-sized clarifier (SCC) are described. The SCE construction provides their remote service with the help of manipulators. The arrangement of sections in the block of all apparatuses is the same and it differs only in the number of sections (4-14 sections). Phase mixing and separation are carried out in the sections. The sections rotate with the help of electromotor remotely replaced in case of necessity. The main construction material of the extractors is chromium-nickel steel, stainless bearings, interlaying material -polyethylene. On the basis of SCE construction the SCC is developed with the operating volume up to 1000 cm3 and capacity up to 200 l/h. The clarifier can be used for the control purification of solutions from solid ingredients in hot chambers with remote service. On the basis of the tests performed the conclusion may be made on the advisability of SCC application for preparing initial solutions before extraction

  2. Enrichment technology. Dependable vendor of gas centrifuges

    International Nuclear Information System (INIS)

    Enrichment Technology is an innovative, high-tech company that develops, manufactures and installs gas centrifuges for enriching uranium. In addition, Enrichment Technology designs enrichment plants that use gas centrifuge technology. This technology offers the most efficient and cost-effective method for enriching uranium yet: high-performance, safe technology that dominates the market with a global share of 45 percent. A determining factor in Enrichment Technology's success is its mission: supplying its customers with safe, reliable technology. Production of the centrifuges requires versatile know-how and collaboration between different departments as well as interdisciplinary teams at the various sites. More than 2000 operators at 8 sites in 5 countries contribute their individual knowledge and personal skills in order to produce this exceptional technology. The head office is in Beaconsfield near London and the operational headquarters are in Almelo in the Netherlands. There are other sites in Germany (Juelich und Gronau), Great Britain (Capenhurst) as well as project sites in the USA and France. Capenhurst is where experienced engineers design new enrichment plants and organise their construction. Centrifuge components are manufactured in Almelo and Juelich, while the pipework needed to connect up the centrifuges is produced at the site in Gronau. In Juelich, highly qualified scientists in interdisciplinary teams are continuously researching ways of improving the current centrifuges. Communication between specialists in the fields of chemistry, physics and engineering forms the basis for the company's success and the key to extending this leading position in the global enrichment market. (orig.)

  3. Separation of uranium isotopes by gas centrifugation

    International Nuclear Information System (INIS)

    The uranium isotope enrichment is studied by means of the countercurrent gas centrifuge driven by thermal convection. A description is given of (a) the transfer and purification of the uranium hexafluoride used as process gas in the present investigation; (b) the countercurrent centrifuge ZG3; (c) the system designed for the introduction and extraction of the process gas from the centrifuge; (d) the measurement of the process gas flow rate through the centrifuge; (e) the determination of the uranium isotopic abundance by mass spectrometry; (f) the operation and mechanical behavior of the centrifuge and (g) the isotope separation experiments, performed, respectively, at total reflux and with production of enriched material. The results from the separation experiments at total reflux are discussed in terms of the enrichment factor variation with the magnitude and flow profile of the countercurrent given by the temperature difference between the rotor covers. As far as the separation experiments with production are concerned, the discussion of their results is presented through the variation of the enrichment factor as a function of the flow rate, the observed asymmetry of the process and the calculated separative power of the centrifuge. (Author)

  4. Unexpected properties of the centrifugal force

    International Nuclear Information System (INIS)

    Contrary to what is stated in the Newtonian dynamics, rotation of a reference frame is not sufficient for the occurrence of the centrifugal force. Instead, the necessary and sufficient condition is a motion along a path different from that of a photon trajectory in space. This calls for a rather fundamental change in understanding of the very nature of the centrifugal force. It also has important practical physical consequences: in a strong gravitational field, where light trajectories are substantially curved, centrifugal force is much weaker than the Newtonian theory predicts. In addition, when there are closed (circular) photon trajectories in space, the centrifugal force may reverse its direction - it attracts towards the rotation axis!. The weakening of the centrifugal force in strong gravitational fields and the reversal of its direction in the neighbourhood of close photon trajectories in space fully and clearly explain puzzling examples of counter intuitive behaviour of dynamical effects of rotation found previously by several authors: e.g. reversal of the ellipticity behaviour of the relativistic Maclaurin spheroids (Chandrasekhar and Miller, 1974), reversal of the viscous torque action (Anderson and Lemos, 1988), or the fact that rotation increases internal pressure of a sufficiently compact star (Abramowicz and Wagoner, 1974). Weakening of the centrifugal force implies that rotating neutron stars are less oblate (and probably more stable) than the Newtonian theory predicts. This is important for the recently discussed question of how fast can pulsars spin. (author). 23 refs, 3 figs

  5. Numerical and experimental investigation of the centrifugal stage axial compressor centrifugal stationary GTE

    OpenAIRE

    Шаровский, Михаил Антонович; Усатенко, Елена Александровна; Шелковский, Михаил Юрьевич; Зубрицкая, Инна Аркадьевна

    2012-01-01

    About increase in efficiency of a centrifugal step of the compressor in low-dimensional GTD with the osetsentrobezhny compressor. Use of the “closed” driving wheel as basic possibility of receiving a highly effective centrifugal step. The gazodinamichesky aspect of its design and manufacturing is considered.

  6. Liquid centrifugation for nuclear waste partitioning

    Energy Technology Data Exchange (ETDEWEB)

    Bowman, C.D.

    1992-03-11

    The performance of liquid centrifugation for nuclear waste partitioning is examined for the Accelerator Transmutation of Waste Program currently under study at the Los Alamos National Laboratory. Centrifugation might have application for the separation of the LiF-BeF{sub 2} salt from heavier radioactive materials fission product and actinides in the separation of fission product from actinides, in the isotope separation of fission-product cesium before transmutation of the {sup 137}Cs and {sup 135}Cs, and in the removal of spallation product from the liquid lead target. It is found that useful chemical separations should be possible using existing materials for the centrifuge construction for all four cases with the actinide fraction in fission product perhaps as low as 1 part in 10{sup 7} and the fraction of {sup 137}CS in {sup 133}Cs being as low as a few parts in 10{sup 5}. A centrifuge cascade has the advantage that it can be assembled and operated as a completely closed system without a waste stream except that associated with maintenance or replacement of centrifuge components.

  7. Centrifugal acceleration in the magnetotail lobes

    Directory of Open Access Journals (Sweden)

    H. Nilsson

    2010-02-01

    Full Text Available Combined Cluster EFW and EDI measurements have shown that cold ion outflow in the magnetospheric lobes dominates the hydrogen ion outflow from the Earth's atmosphere. The ions have too low kinetic energy to be measurable with particle instruments, at least for the typical spacecraft potential of a sunlit spacecraft in the tenuous lobe plasmas outside a few RE. The measurement technique yields both density and bulk velocity, which can be combined with magnetic field measurements to estimate the centrifugal acceleration experienced by these particles. We present a quantitative estimate of the centrifugal acceleration, and the velocity change with distance which we would expect due to centrifugal acceleration. It is found that the centrifugal acceleration is on average outward with an average value of about of 5 m s−2. This is small, but acting during long transport times and over long distances the cumulative effect is significant, while still consistent with the relatively low velocities estimated using the combination of EFW and EDI data. The centrifugal acceleration should accelerate any oxygen ions in the lobes to energies observable by particle spectrometers. The data set also put constraints on the effectiveness of any other acceleration mechanisms acting in the lobes, where the total velocity increase between 5 and 19 RE geocentric distance is less than 5 km s−1.

  8. Centrifugal compressor design for electrically assisted boost

    Science.gov (United States)

    Y Yang, M.; Martinez-Botas, R. F.; Zhuge, W. L.; Qureshi, U.; Richards, B.

    2013-12-01

    Electrically assisted boost is a prominent method to solve the issues of transient lag in turbocharger and remains an optimized operation condition for a compressor due to decoupling from turbine. Usually a centrifugal compressor for gasoline engine boosting is operated at high rotational speed which is beyond the ability of an electric motor in market. In this paper a centrifugal compressor with rotational speed as 120k RPM and pressure ratio as 2.0 is specially developed for electrically assisted boost. A centrifugal compressor including the impeller, vaneless diffuser and the volute is designed by meanline method followed by 3D detailed design. Then CFD method is employed to predict as well as analyse the performance of the design compressor. The results show that the pressure ratio and efficiency at design point is 2.07 and 78% specifically.

  9. Analysis of Secondary Flows in Centrifugal Impellers

    Directory of Open Access Journals (Sweden)

    Brun Klaus

    2005-01-01

    Full Text Available Secondary flows are undesirable in centrifugal compressors as they are a direct cause for flow (head losses, create nonuniform meridional flow profiles, potentially induce flow separation/stall, and contribute to impeller flow slip; that is, secondary flows negatively affect the compressor performance. A model based on the vorticity equation for a rotating system was developed to determine the streamwise vorticity from the normal and binormal vorticity components (which are known from the meridional flow profile. Using the streamwise vorticity results and the small shear-large disturbance flow method, the onset, direction, and magnitude of circulatory secondary flows in a shrouded centrifugal impeller can be predicted. This model is also used to estimate head losses due to secondary flows in a centrifugal flow impeller. The described method can be employed early in the design process to develop impeller flow shapes that intrinsically reduce secondary flows rather than using disruptive elements such as splitter vanes to accomplish this task.

  10. Effects of chronic centrifugation on mice

    Science.gov (United States)

    Janer, L.; Duke, J.

    1984-01-01

    Previous studies have shown that exposure to excess gravity in vitro alters the developmental sequence in embryonic mouse limbs and palates (Duke, Janer and Campbell, 1984; Duke, 1983). The effects of excess gravity on in vivo mammalian development was investigated using a small animal centrifuge. Four-week old female mice exposed to excess gravities of 1.8-3.5 G for eight weeks weighed significantly less than controls. Mice were mated after five weeks of adaptation to excess G, and sacrificed either at gestational day 12 or 18. There were fewer pregnancies in the centrifuged group (4/36) than in controls (9/31), and crown rump lengths (CRL) of embryos developing in the centrifuge were less than CRLs of 1-G embryos. These results show that although immersed in amniotic fluid, embryos are responsive to Delta-G.

  11. Centrifugal compressor design for electrically assisted boost

    International Nuclear Information System (INIS)

    Electrically assisted boost is a prominent method to solve the issues of transient lag in turbocharger and remains an optimized operation condition for a compressor due to decoupling from turbine. Usually a centrifugal compressor for gasoline engine boosting is operated at high rotational speed which is beyond the ability of an electric motor in market. In this paper a centrifugal compressor with rotational speed as 120k RPM and pressure ratio as 2.0 is specially developed for electrically assisted boost. A centrifugal compressor including the impeller, vaneless diffuser and the volute is designed by meanline method followed by 3D detailed design. Then CFD method is employed to predict as well as analyse the performance of the design compressor. The results show that the pressure ratio and efficiency at design point is 2.07 and 78% specifically

  12. Possible segregation caused by centrifugal titanium casting.

    Science.gov (United States)

    Watanabe, K; Okawa, S; Kanatani, M; Nakano, S; Miyakawa, O; Kobayashi, M

    1996-12-01

    The possibility of the segregation under solidification process using a centrifugal casting machine was investigated using an electron probe microanalyzer with elemental distribution map, line analysis and quantitative analysis. When a very small quantity of platinum was added to local molten titanium during the casting process, macroscopic segregation was observed under conditions of density difference of 0.1 g/cm3 at the most, confirming that the centrifugal force of the casting machine is extremely strong. When a Ti-6Al-4V alloy was cast, however, no macroscopic segregation was observed. The centrifugal force of the casting machine examined in the present study hardly results in the body-force segregation in this titanium alloy. PMID:9550020

  13. Effects of Centrifuge Diameter and Operation on Rodent Adaptation to Chronic Centrifugation

    Science.gov (United States)

    Fuller, Charles A.

    1997-01-01

    This study examined the responses of rats to centrifugation in a constant acceleration field (1.5 G). Centrifuge diameter (1.8m, 2.5m or 6.0m) and schedule of operation (Daily or weekly stop) varied between groups. Body mass, food consumption, water consumption and neurovestibular function were measured weekly. Body temperature and activity were continuously monitored using telemetry. A subset of subjects were videotaped (50 minutes per day) to allow for movement analysis. Exposure to a hyperdynamic field of this magnitude did cause the expected depression in the physiological variables monitored. Recovery was accomplished within a relatively rapid time frame; all variables returned to precentrifugation levels. In general, the magnitudes of the changes and the rate of recovery were similar at different centrifuge diameters and stopping frequency. There were cases, however, in which the magnitude of the response and/or the rate of recovery to a new steady-state were altered as a result of centrifuge diameter. In summary, these results indicate that stopping frequency has little, if any, effect on adaptation to chronic centrifugation. However, the angular velocity (omega), and therefore centrifuge diameter is an important consideration in the adaptation of an organism to chronic centrifugation.

  14. Detection methods for centrifugal microfluidic platforms.

    Science.gov (United States)

    Burger, Robert; Amato, Letizia; Boisen, Anja

    2016-02-15

    Centrifugal microfluidics has attracted much interest from academia as well as industry, since it potentially offers solutions for affordable, user-friendly and portable biosensing. A wide range of so-called fluidic unit operations, e.g. mixing, metering, liquid routing, and particle separation, have been developed and allow automation and integration of complex assay protocols in lab-on-a-disc systems. Besides liquid handling, the detection strategy for reading out the assay is crucial for developing a fully integrated system. In this review, we focus on biosensors and readout methods for the centrifugal microfluidics platform and cover optical as well as mechanical and electrical detection principles. PMID:26166363

  15. Wave-Driven Rotation In Centrifugal Mirrors

    Energy Technology Data Exchange (ETDEWEB)

    Abraham J. Fetterman and Nathaniel J. Fisch

    2011-03-28

    Centrifugal mirrors use supersonic rotation to provide axial confinement and enhanced stability. Usually the rotation is produced using electrodes, but these electrodes have limited the rotation to the Alfven critical ionization velocity, which is too slow to be useful for fusion. Instead, the rotation could be produced using radio frequency waves. A fixed azimuthal ripple is a simple and efficient wave that could produce rotation by harnessing alpha particle energy. This is an extension of the alpha channeling effect. The alpha particle power and efficiency in a simulated devices is sufficient to produce rotation without external energy input. By eliminating the need for electrodes, this opens new opportunities for centrifugal traps.

  16. Wave-Driven Rotation In Centrifugal Mirrors

    International Nuclear Information System (INIS)

    Centrifugal mirrors use supersonic rotation to provide axial confinement and enhanced stability. Usually the rotation is produced using electrodes, but these electrodes have limited the rotation to the Alfven critical ionization velocity, which is too slow to be useful for fusion. Instead, the rotation could be produced using radio frequency waves. A fixed azimuthal ripple is a simple and efficient wave that could produce rotation by harnessing alpha particle energy. This is an extension of the alpha channeling effect. The alpha particle power and efficiency in a simulated devices is sufficient to produce rotation without external energy input. By eliminating the need for electrodes, this opens new opportunities for centrifugal traps.

  17. Centrifugal Sieve for Size-Segregation/ Beneficiation of Regolith Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Utilizing centrifugal force as the primary body-force, combined with both shearing flow and vibratory motion the proposed centrifugal-sieve separators can provide...

  18. Design Optimization of Centrifugal Pump Using Radial Basis Function Metamodels

    OpenAIRE

    Yu Zhang; Jinglai Wu; Yunqing Zhang; Liping Chen

    2014-01-01

    Optimization design of centrifugal pump is a typical multiobjective optimization (MOO) problem. This paper presents an MOO design of centrifugal pump with five decision variables and three objective functions, and a set of centrifugal pumps with various impeller shroud shapes are studied by CFD numerical simulations. The important performance indexes for centrifugal pump such as head, efficiency, and required net positive suction head (NPSHr) are investigated, and the results indicate that th...

  19. Differential white cell count by centrifugal microfluidics.

    Energy Technology Data Exchange (ETDEWEB)

    Sommer, Gregory Jon; Tentori, Augusto M.; Schaff, Ulrich Y.

    2010-07-01

    We present a method for counting white blood cells that is uniquely compatible with centrifugation based microfluidics. Blood is deposited on top of one or more layers of density media within a microfluidic disk. Spinning the disk causes the cell populations within whole blood to settle through the media, reaching an equilibrium based on the density of each cell type. Separation and fluorescence measurement of cell types stained with a DNA dye is demonstrated using this technique. The integrated signal from bands of fluorescent microspheres is shown to be proportional to their initial concentration in suspension. Among the current generation of medical diagnostics are devices based on the principle of centrifuging a CD sized disk functionalized with microfluidics. These portable 'lab on a disk' devices are capable of conducting multiple assays directly from a blood sample, embodied by platforms developed by Gyros, Samsung, and Abaxis. [1,2] However, no centrifugal platform to date includes a differential white blood cell count, which is an important metric complimentary to diagnostic assays. Measuring the differential white blood cell count (the relative fraction of granulocytes, lymphocytes, and monocytes) is a standard medical diagnostic technique useful for identifying sepsis, leukemia, AIDS, radiation exposure, and a host of other conditions that affect the immune system. Several methods exist for measuring the relative white blood cell count including flow cytometry, electrical impedance, and visual identification from a stained drop of blood under a microscope. However, none of these methods is easily incorporated into a centrifugal microfluidic diagnostic platform.

  20. Centrifugal Pump Experiment for Chemical Engineering Undergraduates

    Science.gov (United States)

    Vanderslice, Nicholas; Oberto, Richard; Marrero, Thomas R.

    2012-01-01

    The purpose of this paper is to describe a Centrifugal Pump Experiment that provided an experiential learning experience to chemical engineering undergraduates at the University of Missouri in the spring of 2010 in the Unit Operations Laboratory course. Lab equipment was used by senior students with computer-based data and control technology. In…

  1. Positive feedback stabilization of centrifugal compressor surge

    NARCIS (Netherlands)

    Willems, Frank; Heemels, W.P.M.H.; Jager, de Bram; Stoorvogel, Anton A.

    2002-01-01

    Stable operation of axial and centrifugal compressors is limited towards low mass flows due to the occurrence of surge. The stable operating region can be enlarged by active control. In this study, we use a control valve which is fully closed in the desired operating point and only opens to stabiliz

  2. Predicting Droplet Formation on Centrifugal Microfluidic Platforms

    Science.gov (United States)

    Moebius, Jacob Alfred

    Centrifugal microfluidics is a widely known research tool for biological sample and water quality analysis. Currently, the standard equipment used for such diagnostic applications include slow, bulky machines controlled by multiple operators. These machines can be condensed into a smaller, faster benchtop sample-to-answer system. Sample processing is an important step taken to extract, isolate, and convert biological factors, such as nucleic acids or proteins, from a raw sample to an analyzable solution. Volume definition is one such step. The focus of this thesis is the development of a model predicting monodispersed droplet formation and the application of droplets as a technique for volume definition. First, a background of droplet microfluidic platforms is presented, along with current biological analysis technologies and the advantages of integrating such technologies onto microfluidic platforms. Second, background and theories of centrifugal microfluidics is given, followed by theories relevant to droplet emulsions. Third, fabrication techniques for centrifugal microfluidic designs are discussed. Finally, the development of a model for predicting droplet formation on the centrifugal microfluidic platform are presented for the rest of the thesis. Predicting droplet formation analytically based on the volumetric flow rates of the continuous and dispersed phases, the ratios of these two flow rates, and the interfacial tension between the continuous and dispersed phases presented many challenges, which will be discussed in this work. Experimental validation was completed using continuous phase solutions of different interfacial tensions. To conclude, prospective applications are discussed with expected challenges.

  3. Flow Pattern Characterization for a Centrifugal Impeller

    Science.gov (United States)

    Benavides, Efrén M.

    2014-08-01

    This paper proposes a model for characterizing the flow pattern of a centrifugal impeller attending to the severity of the reverse flow. The model assumes 1) a definition of an escaping particle as the one that flows in every operational point from the trailing edge towards the leading edge of the impeller blades, and 2) a characterization of flow where an operational point is said to have a theoretical flow pattern if it is not possible to establish a fully-reversed escaping particle on it. Therefore, the first part of the article is focused on defining an escaping particle for a centrifugal compressor. The model locates over the map of a centrifugal impeller the line that splits the map in two regions: the region on the right hand side, where a theoretical flow pattern can exist, and the region on the left, where a theoretical flow pattern cannot exist. Therefore, the locus of this line marks a frontier where the expected performance of the impeller cannot be sustained as high as expected. The second part of the article uses a high-performance commercial centrifugal impeller wheel for contrasting the model. A qualitative characterization of the surge line, conclusions and discussions are presented.

  4. Rotor for a pyrolysis centrifuge reactor

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention relates to a rotor for a pyrolysis centrifuge reactor, said rotor comprising a rotor body having a longitudinal centre axis, and at least one pivotally mounted blade being adapted to pivot around a pivot axis under rotation of the rotor body around the longitudinal centre axis...

  5. Evaluation of an improved centrifugal casting machine.

    Science.gov (United States)

    Donovan, T E; White, L E

    1985-05-01

    A Type III gold alloy, a silver-palladium alloy, and a base metal alloy were cast in two different centrifugal casting machines. With the number of complete cast mesh squares as an indicator of castability, the Airspin casting machine produced superior castings with all three alloys. The base metal alloy produced the greatest number of complete squares with both casting machines. PMID:3889295

  6. Pressure distribution in centrifugal dental casting.

    Science.gov (United States)

    Nielsen, J P

    1978-02-01

    Equations are developed for liquid metal pressure in centrifugal dental casting, given the instantaneous rotational velocity, density, and certain dimensions of the casting machine and casting pattern. A "reference parabola" is introduced making the fluid pressure concept more understandable. A specially designed specimen demonstrates experimentally the reference parabola at freezing. PMID:355283

  7. Performance of a Centrifugal Slurry Pump

    Directory of Open Access Journals (Sweden)

    Hawas Yahya Bajawi

    2014-02-01

    Full Text Available The aim of this study was to experimentally investigate the effect of speed, concentration and size of slurry on the performance of a centrifugal pump. For this purpose a facility was built where the performance of a centrifugal slurry pump was examined using aggregate slurry. Three sizes of slurry with three concentrations and at three impeller speeds were used for the performance investigations of a centrifugal slurry pump. As a reference performance the performance of centrifugal slurry pump was also tested with clean water. The performance of pump has been reported as variations of head, power and efficiency at various flow rates along with the system characteristics of the pump. The results reveal that the pump performance is grossly affected by the type of slurry, its concentration and size. Besides this the variation in speed also affects the performance as is observed in pumps with water. The maximum decrease in the head, with respect to clear water, at the operating point was found to be 47% for aggregate for size 20 mm, 15% concentration and 2600 rpm. The maximum decrement in efficiency at operating point for aggregate was found to be 47% for 4 mm size, 15% concentration and at 2200 rpm. The power increment requirement for aggregate was 9% for 4 mm size, 15% concentration and 2600 rpm.

  8. A Novel Fabrication Method for Functionally Graded Materials under Centrifugal Force: The Centrifugal Mixed-Powder Method

    OpenAIRE

    Eri Miura-Fujiwara; Yoshifumi Inaguma; Hisashi Sato; Yoshimi Watanabe

    2009-01-01

    One of the fabrication methods for functionally graded materials (FGMs) is a centrifugal solid-particle method, which is an application of the centrifugal casting technique. However, it is the difficult to fabricate FGMs containing nano-particles by the centrifugal solid-particle method. Recently, we proposed a novel fabrication method, which we have named the centrifugal mixed-powder method, by which we can obtain FGMs containing nano-particles. Using this processing method, Cu-based FGMs co...

  9. Mechanisms of Sensorimotor Adaptation to Centrifugation

    Science.gov (United States)

    Paloski, W. H.; Wood, S. J.; Kaufman, G. D.

    1999-01-01

    We postulate that centripetal acceleration induced by centrifugation can be used as an inflight sensorimotor countermeasure to retain and/or promote appropriate crewmember responses to sustained changes in gravito-inertial force conditions. Active voluntary motion is required to promote vestibular system conditioning, and both visual and graviceptor sensory feedback are critical for evaluating internal representations of spatial orientation. The goal of our investigation is to use centrifugation to develop an analog to the conflicting visual/gravito-inertial force environment experienced during space flight, and to use voluntary head movements during centrifugation to study mechanisms of adaptation to altered gravity environments. We address the following two hypotheses: (1) Discordant canal-otolith feedback during head movements in a hypergravity tilted environment will cause a reorganization of the spatial processing required for multisensory integration and motor control, resulting in decreased postural stability upon return to normal gravity environment. (2) Adaptation to this "gravito-inertial tilt distortion" will result in a negative after-effect, and readaptation will be expressed by return of postural stability to baseline conditions. During the third year of our grant we concentrated on examining changes in balance control following 90-180 min of centrifugation at 1.4 9. We also began a control study in which we exposed subjects to 90 min of sustained roll tilt in a static (non-rotating) chair. This allowed us to examine adaptation to roll tilt without the hypergravity induced by centrifugation. To these ends, we addressed the question: Is gravity an internal calibration reference for postural control? The remainder of this report is limited to presenting preliminary findings from this study.

  10. Evolution of microstructure in centrifugal cast Al-Cu alloy

    Directory of Open Access Journals (Sweden)

    Sui Yanwei

    2010-02-01

    Full Text Available In this research, the effects of centrifugal radius and mould rotation speed on microstructure in centrifugal-cast Al-Cu alloy have been investigated. The results show that, with increase of the centrifugal radius or mould rotation speed, the grain size of centrifugal-cast Al-Cu alloy decreases gradually, while the content of white phases containing the Al2Cu precipitated from α-phase, divorced eutectic and regular eutectic microstructure increases, leading to higher Cu macrosegregation. The variation level of microstructure in centrifugal-cast Al-Cu alloy at 600 rpm of mould rotation speed is greater than that at 300 rpm.

  11. Fault Detection and Isolation in Centrifugal Pumps

    DEFF Research Database (Denmark)

    Kallesøe, Carsten

    Centrifugal pumps are used in a variety of different applications, such as water supply, wastewater, and different industrial applications. Some pump installations are crucial for the applications to work. Failures can lead to substantial economic losses and can influence the life of many people...... when they occur. Therefore, detection of faults, if possible in an early stage, and isolation of their causes are of great interest. Especially fault detection, which can be used for predictive maintenance, can decrease working expenses and increase the reliability of the application in which the pump...... is placed. The topic of this work is Fault Detection and Identification in centrifugal pumps. Different approaches are developed with special focus on robustness. Robustness with respect to disturbances, unknown parts of the system, and parameter variations are considered. All developed algorithms...

  12. Centrifuge modelling of offshore monopile foundation

    DEFF Research Database (Denmark)

    Klinkvort, Rasmus Tofte; Hededal, Ole

    2010-01-01

    Today one of the most used concepts for wind turbine foundation is the monopile. The foundation concepts for these monopiles on deeper water is uncertain and consequently the design needs to be conservative leading to uneconomic designs. This paper describes a total number of 6 static and 5 cyclic...... centrifuge tests on a laterally loaded monopile in dry sand. The prototype dimension of the piles was modelled to a diameter of 1 meter and penetration depth on 6 meter. The test series were designed in order to investigate the scaling laws in the centrifuge both for monotonic and cyclic loading. It was not...... possible in the tests to reproduce the same prototype response for both the monotonic and the cyclic loading. It was not clear if this scatter in prototype data was due to normal measurement uncertainties or if the response is depending on the scaling factor....

  13. Condensing Heat Recovery of Centrifugal Chiller

    Institute of Scientific and Technical Information of China (English)

    GONG Guang-cai; JIAO Jun-jun; WANG Li-ping; ZENG Wei

    2009-01-01

    To a kind of centrifugal water chiUer with R22 and about 1745 kW of cooling capacity.a heat exchanger was added between the outlet of compressor and original condenser to get part of or all the condensing heat.Condensing heat can be recovered by compound condensing method,which adopts air-cooling model+wa-ter-cooling model or water-cooling model+water-cooling model at the condensing side of the system.By exergy analysis and experiment research on compound condensing heat recovery of centrifugal chiller,the results are ob-tained that the capability of the whole system increases,the energy efficiency ratio (EER) becomes 3.2~5.0 from 2.2~3.4, which implies the EER increases about 1.0~1.5,the exergy efficiency increases about 10%,and the chiller runs more stably after reformation.

  14. Crud removal equipment using a centrifugal clarifier

    International Nuclear Information System (INIS)

    Centrifugal clarifiers have been applied for the treatment of the radioactive liquid wastes in BWR nuclear power stations to reduce the amount of secondary waste, such as filter aid materials generated by pressure precoat filters. Two steps of the R and D programs have been performed before the full-scale operation of the centrifugal clarifiers installed in the Hamaoka NPS 2 radwaste system: one, a cold test at the laboratory, and the other, a pilot plant test at Hamaoka NPS 1. This paper describes the pilot plant test results and the experience gathered from the actual full-scale equipment operation, that is: concentration of the insoluble impurities of the treated liquid wastes has been kept to less than 0.5 ppm, while that of the fluent increased to approximately 100 ppm; sludge volume reduction by the equipment is approximately one tenth of that made by the pressure precoat filters

  15. High stability design for new centrifugal compressor

    Science.gov (United States)

    Kanki, H.; Katayama, K.; Morii, S.; Mouri, Y.; Umemura, S.; Ozawa, U.; Oda, T.

    1989-01-01

    It is essential that high-performance centrifugal compressors be free of subsynchronous vibrations. A new high-performance centrifugal compressor has been developed by applying the latest rotordynamics knowledge and design techniques: (1) To improve the system damping, a specially designed oil film seal was developed. This seal attained a damping ratio three times that of the conventional design. The oil film seal contains a special damper ring in the seal cartridge. (2) To reduce the destabilizing effect of the labyrinth seal, a special swirl canceler (anti-swirl nozzle) was applied to the balance piston seal. (3) To confirm the system damping margin, the dynamic simulation rotor model test and the full load test applied the vibration exciting test in actual load conditions.

  16. Meridional Considerations of the Centrifugal Compressor Development

    Directory of Open Access Journals (Sweden)

    C. Xu

    2012-01-01

    Full Text Available Centrifugal compressor developments are interested in using optimization procedures that enable compressor high efficiency and wide operating ranges. Recently, high pressure ratio and efficiency of the centrifugal compressors require impeller design to pay attention to both the blade angle distribution and the meridional profile. The geometry of the blades and the meridional profile are very important contributions of compressor performance and structure reliability. This paper presents some recent studies of meridional impacts of the compressor. Studies indicated that the meridional profiles of the impeller impact the overall compressor efficiency and pressure ratio at the same rotational speed. Proper meridional profiles can improve the compressor efficiency and increase the overall pressure ratio at the same blade back curvature.

  17. Vibration analysis of large centrifugal pump rotors

    Science.gov (United States)

    Y Zhao, W.; Ge, J. G.; Ma, D.; Li, C. M.; Bao, S. B.

    2013-12-01

    Through the critical speed of centrifugal pumps, internal flow field and the force of the impeller, we analyze centrifugal pump vibration. Using finite element analysis software ANSYS to calculate the natural frequency of the rotor system and the critical speed; with the help of the Fluent software to simulate pump internal flow field, we conclude that speed increase will not cause intense vibration of the fluid in the pump. Using unsteady numerical simulation we discovered that in an impeller suffering transient radial force cyclical change periodically, as well as the frequency size determined by the product of the impeller speed and number of blades, resonance phenomena should make impeller to transient radial force frequency. If wanting to avoid pump resonance when it is running away, the transient radial force frequency should avoid the frequency range which can cause resonance.

  18. A vibration model for centrifugal contactors

    Energy Technology Data Exchange (ETDEWEB)

    Leonard, R.A.; Wasserman, M.O.; Wygmans, D.G.

    1992-11-01

    Using the transfer matrix method, we created the Excel worksheet ``Beam`` for analyzing vibrations in centrifugal contactors. With this worksheet, a user can calculate the first natural frequency of the motor/rotor system for a centrifugal contactor. We determined a typical value for the bearing stiffness (k{sub B}) of a motor after measuring the k{sub B} value for three different motors. The k{sub B} value is an important parameter in this model, but it is not normally available for motors. The assumptions that we made in creating the Beam worksheet were verified by comparing the calculated results with those from a VAX computer program, BEAM IV. The Beam worksheet was applied to several contactor designs for which we have experimental data and found to work well.

  19. A vibration model for centrifugal contactors

    International Nuclear Information System (INIS)

    Using the transfer matrix method, we created the Excel worksheet ''Beam'' for analyzing vibrations in centrifugal contactors. With this worksheet, a user can calculate the first natural frequency of the motor/rotor system for a centrifugal contactor. We determined a typical value for the bearing stiffness (kB) of a motor after measuring the kB value for three different motors. The kB value is an important parameter in this model, but it is not normally available for motors. The assumptions that we made in creating the Beam worksheet were verified by comparing the calculated results with those from a VAX computer program, BEAM IV. The Beam worksheet was applied to several contactor designs for which we have experimental data and found to work well

  20. Vibration analysis of large centrifugal pump rotors

    International Nuclear Information System (INIS)

    Through the critical speed of centrifugal pumps, internal flow field and the force of the impeller, we analyze centrifugal pump vibration. Using finite element analysis software ANSYS to calculate the natural frequency of the rotor system and the critical speed; with the help of the Fluent software to simulate pump internal flow field, we conclude that speed increase will not cause intense vibration of the fluid in the pump. Using unsteady numerical simulation we discovered that in an impeller suffering transient radial force cyclical change periodically, as well as the frequency size determined by the product of the impeller speed and number of blades, resonance phenomena should make impeller to transient radial force frequency. If wanting to avoid pump resonance when it is running away, the transient radial force frequency should avoid the frequency range which can cause resonance

  1. Centrifugal shot blasting. Innovative technology summary report

    International Nuclear Information System (INIS)

    At the US Department of Energy (DOE) Fernald Environmental Management Project (FEMP), the Facilities Closure and Demolition Projects Integrated Remedial Design/Remedial Action (RD/RA) work plan calls for the removal of one inch (1 in) depth of concrete surface in areas where contamination with technetium-99 has been identified. This report describes a comparative demonstration between two concrete removal technologies: an innovative system using Centrifugal Shot Blasting (CSB) and a modified baseline technology called a rotary drum planer

  2. DESIGN PARAMETERS OF CENTRIFUGAL COMPRESSOR INDUCER

    OpenAIRE

    KOÇAK, Saim

    1998-01-01

    Design characteristics of centrifugal compressor impellers working with compressible fluids are analyzed, and the design parameters of inducer are defined. The effects of incidence, deviation and deflection angles, relative eddy, rotating stall and Mach number are investigated. The relation between minimum relative Mach number of inducer and flow angle is investigated and it is observed that the minimum Mach number occurs for flow angle values between -680 and -520 . In the design, the effect...

  3. Development of centrifuge modelling in geotechnics

    OpenAIRE

    J. Garnier

    2006-01-01

    In order to satisfy similitude conditions, physical modelling in the field of geotechnics requires major facilities, such as shaking tables, calibration chambers and centrifuges. The rapid expansion of centifuge modelling since the beginning of the 1980's can be explained by technological developments in computing, electronics and mechanics as well by enhanced knowledge in the areas of scaling laws, thanks to recent research work on both the properties of reconstituted soils and similitude co...

  4. Centrifuge modeling of soil atmosphere interaction

    OpenAIRE

    CAICEDO, B; TRISTANCHO, J; THOREL, Luc

    2010-01-01

    Atmosphere process of infiltration or evaporation affect the behavior of geotechnical structures located near the soil surface. This paper focuses on the drying process of soils due to evaporation. The scaling laws are analyzed and afterwards the results on applying two cycles of heating and cooling on a soil mass are presented. Based on these results, conclusions about the feasibility of reproducing evaporation on centrifuge models are recommended.

  5. Aerodynamic instabilities in transonic centrifugal compressor

    OpenAIRE

    Buffaz, Nicolas; Trébinjac, Isabelle

    2014-01-01

    International audience This paper presents the analysis of the instabilities inception in a transonic centrifugal com-pressor for different rotation speeds. The analysis was conducted from experimental results obtained with unsteady pressure sensors implanted in the inducer, vaneless diffuser and vaned diffuser. Beyond the stability limit the compressor enters into a deep surge without any precursor, whatever the speed. The surge process is initiated in the vaned diffuser by a massive boun...

  6. CENTRIFUGAL VIBRATION TEST OF RC PILE FOUNDATION

    Science.gov (United States)

    Higuchi, Shunichi; Tsutsumiuchi, Takahiro; Otsuka, Rinna; Ito, Koji; Ejiri, Joji

    It is necessary that nonlinear responses of structures are clarified by soil-structure interaction analysis for the purpose of evaluating the seismic performances of underground structure or foundation structure. In this research, centrifuge shake table tests of reinforced concrete pile foundation installed in the liquefied ground were conducted. Then, finite element analyses for the tests were conducted to confirm an applicability of the analytical method by comparing the experimental results and analytical results.

  7. Submarine landslide flows simulation through centrifuge modelling

    OpenAIRE

    Gue, Chang Shin

    2012-01-01

    Landslides occur both onshore and offshore. However, little attention has been given to offshore landslides (submarine landslides). Submarine landslides have significant impacts and consequences on offshore and coastal facilities. The unique characteristics of submarine landslides include large mass movements and long travel distances at very gentle slopes. This thesis is concerned with developing centrifuge scaling laws for submarine landslide flows through the study of modell...

  8. Potential flow through centrifugal pumps and turbines

    Science.gov (United States)

    Sorensen, E

    1941-01-01

    The methods of conformal transformation up to the present have been applied to the potential flows in the rotation of solid bodies only to a limited extent. This report deals with aspects of centrifugal pumps and turbines such as: the complex potential for rotation, potential for the flow due to the blade rotation, velocities at the blade tip, comparison with "infinite number of blades," and a variable number of blades.

  9. Detecting dark matter using centrifuging techniques

    OpenAIRE

    Mitra, S.; Foot, R.

    2003-01-01

    A new and inexpensive technique for detecting self interacting dark matter in the form of small grains in bulk matter is proposed. Depending on the interactions with ordinary matter, dark matter grains in bulk matter may be isolated by using a centrifuge and using ordinary matter as a filter. The case of mirror matter interacting with ordinary matter via photon-mirror photon kinetic mixing provides a concrete example of this type of dark matter candidate.

  10. Shallow water model for horizontal centrifugal casting

    Science.gov (United States)

    Boháček, J.; Kharicha, A.; Ludwig, A.; Wu, M.

    2012-07-01

    A numerical model was proposed to simulate the solidification process of an outer shell of work roll made by the horizontal centrifugal casting technique. Shallow water model was adopted to solve the 2D average flow dynamics of melt spreading and the average temperature distribution inside the centrifugal casting mould by considering the centrifugal force, Coriolis force, viscous force due to zero velocity on the mould wall, gravity, and energy transport by the flow. Additionally, a 1D sub-model was implemented to consider the heat transfer in the radial direction from the solidifying shell to the mould. The solidification front was tracked by fulfilling the Stefan condition. Radiative and convective heat losses were included from both, the free liquid surface and the outer wall of the mould. Several cases were simulated with the following assumed initial conditions: constant height of the liquid metal (10, 20, and 30 mm), uniform temperature of the free liquid surface (1755 K). The simulation results have shown that while the solidification front remained rather flat, the free surface was disturbed by waves. The amplitude of waves increased with the liquid height. Free surface waves diminished as the solidification proceeded.

  11. CFD Simulation of Annular Centrifugal Extractors

    Directory of Open Access Journals (Sweden)

    S. Vedantam

    2012-01-01

    Full Text Available Annular centrifugal extractors (ACE, also called annular centrifugal contactors offer several advantages over the other conventional process equipment such as low hold-up, high process throughput, low residence time, low solvent inventory and high turn down ratio. The equipment provides a very high value of mass transfer coefficient and interfacial area in the annular zone because of the high level of power consumption per unit volume and separation inside the rotor due to the high g of centrifugal field. For the development of rational and reliable design procedures, it is important to understand the flow patterns in the mixer and settler zones. Computational Fluid Dynamics (CFD has played a major role in the constant evolution and improvements of this device. During the past thirty years, a large number of investigators have undertaken CFD simulations. All these publications have been carefully and critically analyzed and a coherent picture of the present status has been presented in this review paper. Initially, review of the single phase studies in the annular region has been presented, followed by the separator region. In continuation, the two-phase CFD simulations involving liquid-liquid and gas-liquid flow in the annular as well as separator regions have been reviewed. Suggestions have been made for the future work for bridging the existing knowledge gaps. In particular, emphasis has been given to the application of CFD simulations for the design of this equipment.

  12. EM Task 9 - Centrifugal Membrane Filtration

    International Nuclear Information System (INIS)

    This project is designed to establish the utility of a novel centrifugal membrane filtration technology for the remediation of liquid mixed waste streams at US Department of Energy (DOE) facilities in support of the DOE Environmental Management (EM) program. The Energy and Environmental Research Center (EERC) has teamed with SpinTek Membrane Systems, Inc., a small business and owner of the novel centrifugal membrane filtration technology, to establish the applicability of the technology to DOE site remediation and the commercial viability of the technology for liquid mixed waste stream remediation. The technology is a uniquely configured process that makes use of ultrafiltration and centrifugal force to separate suspended and dissolved solids from liquid waste streams, producing a filtered water stream and a low-volume contaminated concentrate stream. This technology has the potential for effective and efficient waste volume minimization, the treatment of liquid tank wastes, the remediation of contaminated groundwater plumes, and the treatment of secondary liquid waste streams from other remediation processes, as well as the liquid waste stream generated during decontamination and decommissioning activities

  13. Shallow water model for horizontal centrifugal casting

    International Nuclear Information System (INIS)

    A numerical model was proposed to simulate the solidification process of an outer shell of work roll made by the horizontal centrifugal casting technique. Shallow water model was adopted to solve the 2D average flow dynamics of melt spreading and the average temperature distribution inside the centrifugal casting mould by considering the centrifugal force, Coriolis force, viscous force due to zero velocity on the mould wall, gravity, and energy transport by the flow. Additionally, a 1D sub-model was implemented to consider the heat transfer in the radial direction from the solidifying shell to the mould. The solidification front was tracked by fulfilling the Stefan condition. Radiative and convective heat losses were included from both, the free liquid surface and the outer wall of the mould. Several cases were simulated with the following assumed initial conditions: constant height of the liquid metal (10, 20, and 30 mm), uniform temperature of the free liquid surface (1755 K). The simulation results have shown that while the solidification front remained rather flat, the free surface was disturbed by waves. The amplitude of waves increased with the liquid height. Free surface waves diminished as the solidification proceeded.

  14. Compact, Automated Centrifugal Slide-Staining System

    Science.gov (United States)

    Feeback, Daniel L.; Clarke, Mark S. F.

    2004-01-01

    The Directional Acceleration Vector-Driven Displacement of Fluids (DAVD-DOF) system, under development at the time of reporting the information for this article, would be a relatively compact, automated, centrifugally actuated system for staining blood smears and other microbiological samples on glass microscope slides in either a microgravitational or a normal Earth gravitational environment. The DAVD-DOF concept is a successor to the centrifuge-operated slide stainer (COSS) concept, which was reported in Slide-Staining System for Microgravity or Gravity (MSC-22949), NASA Tech Briefs, Vol. 25, No. 1 (January, 2001), page 64. The COSS includes reservoirs and a staining chamber that contains a microscope slide to which a biological sample is affixed. The staining chamber is sequentially filled with and drained of staining and related liquids from the reservoirs by use of a weighted plunger to force liquid from one reservoir to another at a constant level of hypergravity maintained in a standard swing-bucket centrifuge. In the DAVD-DOF system, a staining chamber containing a sample would also be sequentially filled and emptied, but with important differences. Instead of a simple microscope slide, one would use a special microscope slide on which would be fabricated a network of very small reservoirs and narrow channels connected to a staining chamber (see figure). Unlike in the COSS, displacement of liquid would be effected by use of the weight of the liquid itself, rather than the weight of a plunger.

  15. ELECTRO-HYDRAULIC SERVO SYSTEM IN THE CENTRIFUGE FIELD

    Institute of Scientific and Technical Information of China (English)

    Dong Longlei; Yan Guirong; Li Ronglin

    2004-01-01

    The mechanical characteristics of the electro-hydraulic servo system in the centrifuge field are analyzed.The hydraulic pressure law in the centrifuge field indicates the existence of the centrifuge hydraulic pressure.The mechanical characteristics of the slide-valve and the dual nozzle flapper valve are studied,and it is found that the centrifuge field can not only increase the driving force or moment of the function units,but also decrease the stability of the components.Finally by applying Gauss minimum constraint principle,the dynamic model of the electro-hydraulic vibrator in the centrifuge field is established,and the mechanical restriction of the system is also presented.The study will be helpful for the realization of the combined vibration and centrifuge test system.

  16. Optimum axial flow taper in a countercurrent gas centrifuge

    Energy Technology Data Exchange (ETDEWEB)

    Von Halle, E.

    1979-02-01

    The effect of an axially varying countercurrent circulation rate in a gas centrifuge on the efficiency factors, e/sub I/, the ideality efficiency, and e/sub C/, the circulation efficiency, is investigated and compared with the case in which the countercurrent circulation rate is constant throughout the centrifuge. The optimum variation of the centrifuge parameter m, which is a measure of the countercurrent circulation rate, as a function of axial position in the centrifuge is determined. It is shown that when the countercurrent circulation rate has its optimum value at every axial position in the centrifuge, the product of the efficiency factors, e/sub I/ x e/sub C/, can exceed 81 per cent, the nominal upper limit of the value of the product of the efficiency factors for a constant countercurrent circulation rate, and can be quite close to unity. This is illustrated by numerical examples based on a centrifuge previously described in the literature.

  17. Pressure Pulsation Signal Analysis for Centrifugal Compressor Blade Crack Determination

    OpenAIRE

    Hongkun Li; Xuefeng Zhang; Xiaowen Zhang; Shuhua Yang; Fujian Xu

    2014-01-01

    Blade is a key piece of component for centrifugal compressor. But blade crack could usually occur as blade suffers from the effect of centrifugal forces, gas pressure, friction force, and so on. It could lead to blade failure and centrifugal compressor closing down. Therefore, it is important for blade crack early warning. It is difficult to determine blade crack as the information is weak. In this research, a pressure pulsation (PP) sensor installed in vicinity to the crack area is used to d...

  18. On assessment of processing variables on vertical centrifugal casting technique

    OpenAIRE

    Chirita, Georgel; Stefanescu, I.; Barbosa, J; Puga, Hélder; Delfim SOARES; Filipe Samuel SILVA

    2009-01-01

    The aim of the present study is to investigate the influence of the vertical centrifugal casting technique over mechanical and metallurgical properties of a hypereutectic Al–18Si alloy. Due to the inherent vibration of the centrifugal casting technique, and in order to study and understand the individual effects of the equipment vibration and the centrifugal force itself (pressure or fluid dynamics), as well as the combined effect of both, three different tests were performed: gra...

  19. Fabrication of bulk metallic glasses by centrifugal casting method

    OpenAIRE

    R. Nowosielski; R. Babilas

    2007-01-01

    Purpose: The aim of the present work is characterization of the centrifugal casting method, apparatus andproduced amorphous materials, which are also known as bulk metallic glassesDesign/methodology/approach: The studied centrifugal casting system consists of two main parts: castingapparatus and injection system of molten alloy. The described centrifugal casting method was presented bypreparing a casting apparatus “CentriCast – 5”. The apparatus includes a cylindrical copper mold, which isrot...

  20. Complex Doping of Uranium under Centrifugal Casting in Zirconium Mold

    International Nuclear Information System (INIS)

    The paper presents the results of the investigation on the structure and distribution pattern of the doping elements in uranium casting, produced by the centrifugal casting in a sealed zirconium mold. It is investigated the possibility of complex zirconium and iron doping of uranium. The values of the zirconium mold dissolution rate against the centrifugal casting time are provided. The mechanism is suggested for doping uranium with the elements included in the mold material during the fuel rod fabrication by the centrifugal casting

  1. DESIGN AND FABRICATION OF A CENTRIFUGAL CASTING MACHINE

    OpenAIRE

    Adedipe Oyewole; Abolarin Matthew Sunday

    2011-01-01

    The design and fabrication of a centrifugal casting machine was successfully carried out. The operation of the machine was based on the principle of centrifugal force. Suitable design theory, analysis and calculation were adopted carried out in the course of the work. The mold is bolted to the base plate which can rotate at moderatespeeds thereby forcing the molten metal against the inner walls of the mold. This machine could be used to cast small engineering components. The centrifugal force...

  2. Numerical Investigations on the Transient Performance of a Centrifugal Pump

    OpenAIRE

    Asim, Taimoor; Mishra, Rakesh

    2015-01-01

    Centrifugal pumps are an integral part of plants used in process industries. The flow structure within a centrifugal pump is very complex due to the interaction between the rotating impeller and the geometric features around it. In the present study, numerical investigations on a centrifugal pump have been carried out using a Computational Fluid Dynamics (CFD) based solver. This study employs finite volume technique in order to analyse the influence of variations in the rotational speed of th...

  3. Latex Micro-balloon Pumping in Centrifugal Microfluidic Platforms

    OpenAIRE

    Aeinehvand, Mohammad Mahdi; Ibrahim, Fatimah; Al-Faqheri, Wisam; Thio, Tzer Hwai Gilbert; Kazemzadeh, Amin; Wadi harun, Sulaiman; Madou, Marc

    2014-01-01

    Centrifugal microfluidic platforms have emerged as point-of-care diagnostic tools. However, the unidirectional nature of the centrifugal force limits the available space for multi-stepped processes on a single microfluidics disc. To overcome this limitation, a passive pneumatic pumping method actuated at high rotational speeds has been previously proposed to pump liquid against the centrifugal force. In this paper, a novel micro-balloon pumping method that relies on elastic energy stored in a...

  4. Effects of centrifugation on gonadal and adrenocortical steroids in rats

    Science.gov (United States)

    Kakihana, R.; Butte, J. C.

    1980-01-01

    Many endocrine systems are sensitive to external changes in the environment. Both the pituitary adrenal and pituitary gonadal systems are affected by stress including centrifugation stress. The effect of centrifugation on the pituitary gonadal and pituitary adrenocortical systems was examined by measuring the gonadal and adrenal steroids in the plasma and brain following different duration and intensity of centrifugation stress in rats. Two studies were completed and the results are presented. The second study was carried out to describe the developmental changes of brain, plasma and testicular testosterone and dihydrotestosterone in Sprague Dawley rats so that the effect of centrifugation stress on the pituitary gonadal syatem could be better evaluated in future studies.

  5. Optimization problem for gas centrifuge and local separation efficiency

    International Nuclear Information System (INIS)

    Application of the ideal centrifuge theory to the numerical calculation and optimization of gas centrifuge and correct choice of local optimum criterion for the problems of numeric optimization is considered. Centrifuge with optimum circulation within rotor is used in reference to ideal one. Separation theory based on the radius-mean method is developed in the work. The error of choosing optimum criterion associated with the direct transfer of the ideal cascade theory available to literature is analyzed for the problems of the numerical optimization of centrifuge

  6. EM Task 9 - Centrifugal membrane filtration

    International Nuclear Information System (INIS)

    The overall project consists of several integrated research phases related to the applicability, continued development, demonstration, and commercialization of the SpinTek centrifugal membrane filtration process. Work performed during this reporting period consisted of Phase 2 evaluation of the SpinTek centrifugal membrane filtration technology and Phase 3, Technology Partnering. During Phase 1 testing conducted at the EERC using the SpinTek ST-IIL unit operating on a surrogate tank waste, a solids cake developed on the membrane surface. The solids cake was observed where linear membrane velocities were less than 17.5 ft/s and reduced the unobstructed membrane surface area up to 25%, reducing overall filtration performance. The primary goal of the Phase 2 research effort was to enhance filtration performance through the development and testing of alternative turbulence promoter designs. The turbulence promoters were designed to generate a shear force across the entire membrane surface sufficient to maintain a self-cleaning membrane capability and improve filtration efficiency and long-term performance. Specific Phase 2 research activities included the following: System modifications to accommodate an 11-in.-diameter, two-disk rotating membrane assembly; Development and fabrication of alternative turbulence promoter designs; Testing and evaluation of the existing and alternative turbulence promoters under selected operating conditions using a statistically designed test matrix; and Data reduction and analysis; The objective of Phase 3 research was to demonstrate the effectiveness of SpinTek's centrifugal membrane filtration as a pretreatment to remove suspended solids from a liquid waste upstream of 3M's WWL cartridge technology for the selective removal of technetium (Tc)

  7. Characteristics of centrifugal rapid contactor, (3)

    International Nuclear Information System (INIS)

    Organic solvent yields the degradation product as a result of irradiation, in the extraction process of spent fuel reprocessing. The development of a centrifugal rapid contactor is required for the reduction of the solvent degradation by shortening the contact time. The effects of fine solid particles were investigated with a SGN-Robatel LX-208N contactor, following the uranium extraction and re-extraction performance tests. It was found as the experimental result that the considerable quantity of solids accumulated in the rotor of the centrifugal contactor. As for this experimental apparatus, the flow diagram for the centrifugal rapid contactor and auxiliary apparatuses is shown, which are the same system used for the uranium extraction and re-extraction tests. The schematic diagram, the typical stage construction and fluid transfer path of the LX-208 contactor are illustrated. The main specifications of the LX-208 contactor are as follows: the internal diameter of a rotating bowl 200 mm, the material SUS 316, the number of stages 8, and the total hold-up volume of the contactor 1.8 l. Most tests were carried out with aqueous feed only, because white Alundum is easily deposited in the rotor, and the particle concentration in effluent stream becomes undetectable when organic and aqueous feeds are supplied simultaneously. As the experimental results, the correlation of Alundum concentration in effluent and running time, the effect of rotor speed on effluent stream concentration, the particle size distribution curves for No. 6000 and No. 8000 white Alundum, the effect of flow rate on effluent stream concentration and the effect of flow rate on particle size distribution for both No. 6000 and No. 8000 white Alundum are presented. (Nakai, Y.)

  8. Effects of Prolonged Centrifugation on Orthostasis

    Science.gov (United States)

    Cohen, Malcolm M..; Hargens, A. R.; Yates, B. J.; Bowley, Susan M. (Technical Monitor)

    2000-01-01

    A feasibility study conducted on the Ames 20-G Human Centrifuge examined how well humans can maintain orthostatic tolerance during and after prolonged exposures to hypergravity. Three adult males lived for periods of 22 hours in the centrifuge while it was at rest (1.00 G), and while it rotated at 9.38 RPM to provide 1.25 G-total at the mean radius of 7.62 m. Two participants also experienced 22-hour habitation sessions at 11.46 RPM, which provided 1.50 G-total. Both before and after each habitation session, the participants were given gradual onset rate (GOR) acceleration profiles at 0.067 G/sec to determine their Gz tolerance. In addition, cardiovascular responses were compared while subjects were supine, siting, and standing at various times during the habitation (stand test), and cardiovascular responsiveness was determined using a lower body negative pressure tilt table (LBNPTT) at the beginning of the experiment and after each session. Post-Pre changes in G tolerance were -0.33 (mean) +/- 0.11 (std. error) Gz for habitation at 1.00 G, -0.02 +/- 0.12 Gz for habitation at 1.25 G, and +0.41 +/- 0.13 Gz for habitation at 1.50 G. Performance on the stand test generally improved with duration of habitation in hypergravity. Our results suggest that habitation in a confined chamber at 1.00 G reduces G tolerance and leads to lowered LBNPTT tolerance. Exposure to increased G in the centrifuge leads to enhanced performance on the stand test, and to increased GOR acceleration tolerance, but only when fluid balance is maintained; when motion sickness and negative fluid balance were observed, G tolerance was reduced. The data indicate that enhanced G tolerance can result from prolonged exposure to hypergravity, but that these changes are complex and depend on multiple underlying physiological processes.

  9. Pouring mould during centrifugal casting process

    Directory of Open Access Journals (Sweden)

    J. Śleziona

    2007-07-01

    Full Text Available Purpose: The paper presents the model and the example simulations of the centrifugal casting of metal matrix composite reinforced with SiC, especially the distribution of the velocity of liquid composite for the initial stage of pouring the mould (up to 1s.Design/methodology/approach: Numerical simulations have been performed using the CFD program FLUENT 6.1.To simulate pouring the mould, axisymmetric swirl model has been applied. To model the air-matrix free surface (and also volume fraction of particular continuous phases and dispersed phase, Vo lume of Fluid approach (VOF and Discrete Phase Model (DPM have been used, respectively. The turbulent flow of the fluid has been simulated by the standard k-ε model of turbulence.Findings: The results show that the behaviour of composite in pouring process depends strongly on the existence of reinforcement and process parameters and the initial stage of the casting can probably have an influence on the segregation and various final distribution of reinforcement particles.Research limitations/implications: The implemented simulational scheme can be used to study the behaviour of liquid composite during casting and the final simulational structure of composite should be verified experimentally.Practical implications: The simulation by CFD program (Fluent can be treated as an attractive and useful tool for modelling centrifugal casting process of metal matrix composite reinforced by ceramic particles. The created model and procedures can be come the basis for more advanced researches.Originality/value: The development of CFD program and the computer technology allow to study even complicated problems. Hence, we have implemented the CFD program to simulate the centrifugal casing of composite.

  10. Upgrading MSR performance with centrifugal separators

    International Nuclear Information System (INIS)

    Moisture separator performance in nuclear plants has been inadequate in many cases, with the plant experiencing excessive outlet moisture content and mechanical degradation. Many of these problems are the result of the inherent disadvantages of inertial separators in the moisture separator reheaters (MSRs). Babcock and Wilcox believes that centrifugal separators, which have been used extensively in fossil and nuclear steam generators, have the potential to improve the performance and reliability of moisture separation in MSRs. Cyclone separators are currently being tested to confirm their performance at MSR operating pressures

  11. Design and Prototyping of Micro Centrifugal Compressor

    Institute of Scientific and Technical Information of China (English)

    Shimpei Mizuki; Gaku Minorikawa; Toshiyuki Hirano; Yuichiro Asaga; Naoki Yamaguchi; Yutaka Ohta; Eisuke Outa

    2003-01-01

    In order to establish the design methodology of ultra micro centrifugal compressor, which is the most important component of ultra micro gas turbine unit, a 10 times of the final target size model was designed, prototyped and tested. The problems to be solved for downsizing were examined and 2-dimensional impeller was chosen as the first model due to its productivity. The conventional 1D prediction method, CFD and the inverse design were attempted. The prototyped compressor was driven by using a turbocharger and the performance characteristics were measured.

  12. Gas centrifuge bibliography 1980-1982

    International Nuclear Information System (INIS)

    A bibliography, with abstract, is presented of the gas centrifuge literature published from 1980 to 1982 inclusive. It supplements PG Information Series 25 (CA), BNFL Information Series 15 (CA) and BNFL Information Series 23 (CA), which covered the periods 1895 to 1970, 1970 to 1974, and 1975 to 1979 respectively. After bibliographies and books and pamphlets, the main list is arranged chronologically under the headings, Reports, Journal articles, and Conference papers. Items omitted from the earlier bibliographies or received too late for inclusion in this, have been listed separately. There are author, report number and subject indexes. (U.K.)

  13. DESIGN PARAMETERS OF CENTRIFUGAL COMPRESSOR INDUCER

    Directory of Open Access Journals (Sweden)

    Saim KOÇAK

    1998-03-01

    Full Text Available Design characteristics of centrifugal compressor impellers working with compressible fluids are analyzed, and the design parameters of inducer are defined. The effects of incidence, deviation and deflection angles, relative eddy, rotating stall and Mach number are investigated. The relation between minimum relative Mach number of inducer and flow angle is investigated and it is observed that the minimum Mach number occurs for flow angle values between -680 and -520 . In the design, the effect of a 100 difference in flow angle is found to be less than 1 % on minimum relative Mach number.

  14. Rotordynamic Forces on Centrifugal Pump Impellers

    OpenAIRE

    Franz, R.; Arndt, N.; Caughey, T. K.; Brennen, C. E.; Acosta, A.J

    1987-01-01

    The asymmetric flow around an impeller in a volute exerts a force upon the impeller. To study the rotordynamic force on an impeller which is vibrating around its machine axis of rotation, the impeller, mounted on a dynamometer, is made to whirl in a circular orbit within the volute. The measured force is expressed as the sum of a steady radial force and an unsteady force due to the eccentric motion of the impeller. These forces were measured in separate tests on a centrifugal pump with rad...

  15. THERMODYNAMIC DESIGN OF CENTRIFUGAL COMPRESSOR FOR TURBOCHARGER

    OpenAIRE

    Sonawane Shubham*, Sondkar Pratik, Qasim Siddiqui, Phirke Indraneel, Prof. R. P. Kakde

    2016-01-01

    The purpose of a turbocharger is to increase the power output of an engine by supplying compressed air to the engine intake manifold so that fuel can be burnt efficiently. In this work, thermodynamic design of a high pressure ratio centrifugal compressor, for 75 kW class engines, was carried out. A pressure ratio of 2.8 was considered with a compressor rotational speed of 60,000 RPM. The compressor was designed for vane less diffuser. The impeller designs were obtained using ci...

  16. Theory and experiments on centrifuge cratering

    Science.gov (United States)

    Schmidt, R. M.; Holsapple, K. A.

    1980-01-01

    Centrifuge experimental techniques provide possibilities for laboratory simulation of ground motion and cratering effects due to explosive loadings. The results of a similarity analysis for the thermomechanical response of a continuum show that increased gravity is a necessary condition for subscale testing when identical materials for both model and prototype are being used. The general similarity requirements for this type of subscale testing are examined both theoretically and experimentally. The similarity analysis is used to derive the necessary and sufficient requirements due to the general balance and jump equations and gives relations among all the scale factors for size, density, stress, body forces, internal energy, heat supply, heat conduction, heat of detonation, and time. Additional constraints due to specific choices of material constitutive equations are evaluated separately. The class of constitutive equations that add no further requirements is identified. For this class of materials, direct simulation of large-scale cratering events at small scale on the centrifuge is possible and independent of the actual constitutive equations. For a rate-independent soil it is shown that a small experiment at gravity g and energy E is similar to a large event at 1 G but with energy equal to g3E. Consequently, experiments at 500 G with 8 grams of explosives can be used to simulate a kiloton in the field. A series of centrifuge experiments was performed to validate the derived similarity requirements and to determine the practicality of applying the technique to dry granular soils having little or no cohesion. Ten shots using Ottawa sand at various gravities confirmed reproducibility of results in the centrifuge environment, provided information on particle size effects, and demonstrated the applicability of the derived similitude requirements. These experiments used 0.5-4 grams of pentaerythritol-tetranitrate (PETN) and 1.7 grams of lead-azide explosives. They

  17. Impeller blade design method for centrifugal compressors

    Science.gov (United States)

    Jansen, W.; Kirschner, A. M.

    1974-01-01

    The design of a centrifugal impeller with blades that are aerodynamically efficient, easy to manufacture, and mechanically sound is discussed. The blade design method described here satisfies the first two criteria and with a judicious choice of certain variables will also satisfy stress considerations. The blade shape is generated by specifying surface velocity distributions and consists of straight-line elements that connect points at hub and shroud. The method may be used to design radially elemented and backward-swept blades. The background, a brief account of the theory, and a sample design are described.

  18. Pouring mould during centrifugal casting process

    OpenAIRE

    J. Śleziona; R. Zagórski

    2007-01-01

    Purpose: The paper presents the model and the example simulations of the centrifugal casting of metal matrix composite reinforced with SiC, especially the distribution of the velocity of liquid composite for the initial stage of pouring the mould (up to 1s).Design/methodology/approach: Numerical simulations have been performed using the CFD program FLUENT 6.1.To simulate pouring the mould, axisymmetric swirl model has been applied. To model the air-matrix free surface (and also volume fractio...

  19. Centrifugally Stimulated Exospheric Ion Escape at Mercury

    Science.gov (United States)

    Delcourt, Dominique; Seki, K.; Terada, N.; Moore, Thomas E.

    2012-01-01

    We investigate the transport of ions in the low-altitude magnetosphere magnetosphere of Mercury. We show that, because of small spatial scales, the centrifugal effect due to curvature of the E B drift paths can lead to significant particle energization in the parallel direction. We demonstrate that because of this effect, ions with initial speed smaller than the escape speed such as those produced via thermal desorption can overcome gravity and escape into the magnetosphere. The escape route of this low-energy exosphere originating material is largely controlled by the magnetospheric convection rate. This escape route spreads over a narrower range of altitudes when the convection rate increases. Bulk transport of low-energy planetary material thus occurs within a limited region of space once moderate magnetospheric convection is established. These results suggest that, via release of material otherwise gravitationally trapped, the E B related centrifugal acceleration is an important mechanism for the net supply of plasma to the magnetosphere of Mercury.

  20. Centrifugal acceleration of the polar wind

    Science.gov (United States)

    Horwitz, J. L.; Ho, C. W.; Scarbro, H. D.; Wilson, G. R.; Moore, T. E.

    1994-01-01

    The effect of parallel ion acceleration associated with convection was first applied to energization of test particle polar ions by Cladis (1986). However, this effect is typically neglected in 'self-consistent' models of polar plasma outflow, apart from the fluid simulation by Swift (1990). Here we include approximations for this acceleration, which we broadly characterize as centrifugal in nature, in our time-dependent, semikinetic model of polar plasma outflow and describe the effects on the bulk parameter profiles and distribution functions of H+ and O+. For meridional convection across the pole the approximate parallel force along a polar magnetic field line may be written as F(sub cent, pole) = 1.5m(E(sub i))/B(sub i))squared (r(squared)/r(sup 3)(sub i)) where m is ion mass, r is geometric distance; and E(sub i), B(sub i) and r(sub i) refer to the electric and magnetic field magnitudes and geocentric distance at the ionosphere, respectively. For purely longitudinal convection along a constant L shell the parallel force is F(cent. long) = F(sub cent, pole)(1 - (r/(r(sub i)L))(sup 3/2)/(1 - 3r/(4 r(sub i)L))(sup 5/2). For high latitudes the difference between these two cases is relatively unimportant below approximately 5 R(sub E). We find that the steady state O+ bulk velocities and parallel temperatures strongly increase and decrease, respectively, with convection strength. In particular, the bulk velocities increase from near 0 km/s at 4000 km altitude to approximately 10 km/s at 5 R(sub E) geocentric distance for 50-mV/m ionospheric convection electric field. However, the centrifugal effect on the steady O+ density profiles depends on the exobase ion and electron temperatures: for low-base temperatures (T(sub i) = T(sub e) = 3000 K) the O+ density at high altitudes increases greatly with convection, while for higher base temperatures (T(sub i) = 5000 K, T(sub e) = 9000 K), the high-altitude O+ density decreases somewhat as convection is enhanced. The

  1. Coil planet centrifugation as a means for small particle separation

    Science.gov (United States)

    Herrmann, F. T.

    1983-01-01

    The coil planet centrifuge uses a centrifugal force field to provide separation of particles based on differences in sedimentation rates by flow through a rotating coiled tube. Three main separations are considered: (1) single phase fresh sheep and human erythrocytes, (2) single phase fixed heep and human erythrocytes, and (3) electrophoretically enhanced single phase fresh sheep and human erythrocytes.

  2. Astronaut Virgil Grissom preparing for training in centrifuge at Johnsville

    Science.gov (United States)

    1959-01-01

    Astronaut Virgil (Gus) Grissom seen preparing for training in centrifuge at Johnsville. A Navy corpsman attaches sensors to Grissom to monitor his body's reaction to the centrifuge (586); He is pictured leaving a U.S. Navy instillation and removing his helmet (587).

  3. Separative power of an optimised concurrent gas centrifuge

    CERN Document Server

    Bogovalov, S V

    2015-01-01

    The problem of separation of uranium isotopes in a concurrent gas centrifuge is solved analytically. Separative power of the optimized concurrent gas centrifuges equals to $\\delta U=12.7(V/700~{\\rm m/s})^2 (300 ~{\\rm K}/T)L, ~{\\rm kg ~SWU/yr}$, where $L$ and $V$ are the length and linear velocity of the rotor of the gas centrifuge, $T$ is the temperature. This formula well agrees with an empirical separative power of counter current gas centrifuges. The optimal value of the separative power is not unique on the plane $(p_w,v_z)$, where $p_w$ is pressure at the wall of the rotor and $v_z$ is axial velocity of the gas. This value is constant on a line defined by the equation $p_wv_z=constant$. Equations defining the mass flux and the electric power necessary to support the rotation of the gas centrifuge are obtained.

  4. Thermal hydrodynamical analysis of a countercurrent gas centrifuge

    International Nuclear Information System (INIS)

    The separative effect in a centrifuge is amplified when a countercurrent in the axial direction is added to the centrifugal field. The mechanisms used to create this countercurrent are obtained with the gas deceleration near to the waste scoop, mechanical effect, and temperature distribution on the rotor walls, thermal effect. This work treats the influence of the thermal countercurrent on the centrifuge separative performance. A complete centrifuge model is presented, therefore this study passes by the hydrodynamical and thermal phenomena analysis. For the accomplishment of this work the gas flow is simulated inside the rotor, initially with arbitrary thermal boundary conditions. Then a structural thermal model is developed to supply the realistic boundary conditions for the hydrodynamical model. This procedure, with the integrated models, allows to propose and to evaluate configuration changes for a centrifuge minimizing the laboratory phase tests

  5. High Efficiency Centrifugal Compressor for Rotorcraft Applications

    Science.gov (United States)

    Medic, Gorazd; Sharma, Om P.; Jongwook, Joo; Hardin, Larry W.; McCormick, Duane C.; Cousins, William T.; Lurie, Elizabeth A.; Shabbir, Aamir; Holley, Brian M.; Van Slooten, Paul R.

    2014-01-01

    The report "High Efficiency Centrifugal Compressor for Rotorcraft Applications" documents the work conducted at UTRC under the NRA Contract NNC08CB03C, with cost share 2/3 NASA, and 1/3 UTRC, that has been extended to 4.5 years. The purpose of this effort was to identify key technical barriers to advancing the state-of-the-art of small centrifugal compressor stages; to delineate the measurements required to provide insight into the flow physics of the technical barriers; to design, fabricate, install, and test a state-of-the-art research compressor that is representative of the rear stage of an axial-centrifugal aero-engine; and to acquire detailed aerodynamic performance and research quality data to clarify flow physics and to establish detailed data sets for future application. The design activity centered on meeting the goal set outlined in the NASA solicitation-the design target was to increase efficiency at higher work factor, while also reducing the maximum diameter of the stage. To fit within the existing Small Engine Components Test Facility at NASA Glenn Research Center (GRC) and to facilitate component re-use, certain key design parameters were fixed by UTRC, including impeller tip diameter, impeller rotational speed, and impeller inlet hub and shroud radii. This report describes the design effort of the High Efficiency Centrifugal Compressor stage (HECC) and delineation of measurements, fabrication of the compressor, and the initial tests that were performed. A new High-Efficiency Centrifugal Compressor stage with a very challenging reduction in radius ratio was successfully designed, fabricated and installed at GRC. The testing was successful, with no mechanical problems and the running clearances were achieved without impeller rubs. Overall, measured pressure ratio of 4.68, work factor of 0.81, and at design exit corrected flow rate of 3 lbm/s met the target requirements. Polytropic efficiency of 85.5 percent and stall margin of 7.5 percent were

  6. A Novel Fabrication Method for Functionally Graded Materials under Centrifugal Force: The Centrifugal Mixed-Powder Method

    Directory of Open Access Journals (Sweden)

    Eri Miura-Fujiwara

    2009-12-01

    Full Text Available One of the fabrication methods for functionally graded materials (FGMs is a centrifugal solid-particle method, which is an application of the centrifugal casting technique. However, it is the difficult to fabricate FGMs containing nano-particles by the centrifugal solid-particle method. Recently, we proposed a novel fabrication method, which we have named the centrifugal mixed-powder method, by which we can obtain FGMs containing nano-particles. Using this processing method, Cu-based FGMs containing SiC particles and Al-based FGMs containing TiO2 nano-particles on their surfaces have been fabricated. In this article, the microstructure and mechanical property of Cu/SiC and Al/TiO2 FGMs, fabricated by the centrifugal mixed-powder method are reviewed.

  7. Centrifugal semicountercurrent extractor with moving heavy phase

    International Nuclear Information System (INIS)

    Construction of semicountercurrent centrifugal extractor with moving heavy phase for radiochemical industry is developed, its operation principle being described. Formulas for determination of the radius of phase interface, hydrolock radius and extractor retaining ability are derived. The correctness of the formula derived is justified experimentally. It is shown that with the increase of consumption the value of retaining ability also grows. For the given reactor at the consumption up to 12 l/h the retaining ability does not exceed 0.1. Priming ablation is not more than 0.02%. The reactor operation limits as to productivity depending on different parameters are determined. Reagent losses as a result of volatility and aerosols are found. It is shown that the apparatus efficiency is near 100%. This testifies to the absence of stagnant zones and mechanical priming ablation of one phase from the other

  8. Two-phase fluids in centrifugal separators

    International Nuclear Information System (INIS)

    In nuclear power plants centrifugal separators are often used for the separation of mixtures of gas and liquid. The investigations described in this paper are concerned with flow distributions in such separators or in other apparatus with a two-phase fluid as the working medium. The measuring methods used for the determination of the local parameters of flow are described. Tests of cascades were performed. The profiles had a mean line of an arc of circle and constant thickness. Blades like these are commonly used in separators. Furthermore the results of measurements in the separation zones of separators of the tangential and the axial type are presented. Finally it will be discussed, in as far the data obtained with a mixture of air and water can also be applied to other mixtures. (orig.)

  9. Recent advances in centrifugal contactors design

    International Nuclear Information System (INIS)

    Advances in thedesign of the Argonne centrifugal contactor for solvent extaction are being realized as these contactors are built, tested, and used to implement the TRUEX process for the cleanup of nuclear waste liquids. These advances include (1) using off-the-shelf, face-mounted motors, (2) modifying the contractor so that relatively volatile solvents can be used, (3) adding a high-level liquid detector that can be used to alert the plant operator of process upsets, (4) providing secondary feed ports, (5) optimizing support frame design, (6) maintaining a linear design with external interstage lines so the stages can be allocated as needed for extraction, scrub, strip, and solvent cleanup operations, and (7) developing features that facilitate contractor operation in remote facilities. 11 refs., 8 figs

  10. Potential commercial applications of centrifuge technology

    International Nuclear Information System (INIS)

    As part of an effort to prevent the loss of and maximize the use of unique developments of the centrifuge program, this document identifies and briefly describes unclassified technologies potentially available for transfer. In addition, this document presents a preliminary plan for action needed to carry out the transfer activity. Continuing efforts will provide additional descriptions of technologies which have applications that are not as apparent or as obvious as those presented here. Declassification of some of the program information, now classified as restricted data, would permit the descriptions of additional technologies which have significant commercial potential. The following are major areas of technology where transfer opportunities exist: biomedical; separation; motors and control systems; materials; vacuum; dynamics and balancing; and diagnostics and instrumentation

  11. Centrifugal acceleration of plasma in pulsar magnetosphere

    Indian Academy of Sciences (India)

    R T Gangadhara; V Krishna

    2003-12-01

    We present a relativistic model for the centrifugal acceleration of plasma bunches and the coherent radio emission in pulsar magnetosphere. We find that rotation broadens the width of leading component compared to the width of trailing component. We explain this difference in the component widths using the nested cone emission geometry. We estimate the effect of pulsar spin on the Stokes parameters, and find that the inclination between the rotation and magnetic axes can introduce an asymmetry in the circular polarization of the conal components. We analyse the single pulse polarization data of PSR B0329+54 at 606 MHz, and find that in its conal components, one sense of circular polarization dominates in the leading component while the other sense dominates in the trailing component. Our simulation shows that changing the sign of the impact parameter changes the sense of circular polarization as well as the swing of polarization angle.

  12. Numerical simulation of centrifugal casting of pipes

    International Nuclear Information System (INIS)

    A numerical simulation model for the horizontal centrifugal pipe casting process was developed with the commercial simulation package Flow3D. It considers - additionally to mass, energy and momentum conservation equations and free surface tracking - the fast radial and slower horizontal movement of the mold. The iron inflow is not steady state but time dependent. Of special importance is the friction between the liquid and the mold in connection with the viscosity and turbulence of the iron. Experiments with the mold at controlled revolution speeds were carried out using a high-speed camera. From these experiments friction coefficients for the description of the interaction between mold and melt were obtained. With the simulation model, the influence of typical process parameters (e.g. melts inflow, mold movement, melt temperature, cooling media) on the wall thickness of the pipes can be studied. The comparison to results of pipes from production shows a good agreement between simulation and reality.

  13. Numerical simulation of centrifugal casting of pipes

    Science.gov (United States)

    Kaschnitz, E.

    2012-07-01

    A numerical simulation model for the horizontal centrifugal pipe casting process was developed with the commercial simulation package Flow3D. It considers - additionally to mass, energy and momentum conservation equations and free surface tracking - the fast radial and slower horizontal movement of the mold. The iron inflow is not steady state but time dependent. Of special importance is the friction between the liquid and the mold in connection with the viscosity and turbulence of the iron. Experiments with the mold at controlled revolution speeds were carried out using a high-speed camera. From these experiments friction coefficients for the description of the interaction between mold and melt were obtained. With the simulation model, the influence of typical process parameters (e.g. melts inflow, mold movement, melt temperature, cooling media) on the wall thickness of the pipes can be studied. The comparison to results of pipes from production shows a good agreement between simulation and reality.

  14. Stability of centrifugal pump characteristic curve

    OpenAIRE

    Chmatil, Ľuboš

    2011-01-01

    Předložená diplomová práce obsahuje teoretický rozbor charakteristik odstředíveho čerpadla, podmínky stability Y(Q) charakteristiky, výpočet charakteristiky ßč(ns), úpravy vedúce k stabilizaci spirálního telesa a oběžného kola, návrh spirály, obežného kola a následný výpočet v programe Fluent. This master's thesis includes theoretical analysis of characteristics of a centrifugal pump, conditions of stability of Y(Q) characteristic, calculation of characteristics ßč(ns), modifications leadi...

  15. Rotordynamic forces on centrifugal pump impellers

    Science.gov (United States)

    Franz, R.; Arndt, N.; Caughey, T. K.; Brennen, C. E.; Acosta, A. J.

    1987-01-01

    The asymmetric flow around an impeller in a volute exerts a force upon the impeller. To study the rotordynamic force on an impeller which is vibrating around its machine axis of rotation, the impeller, mounted on a dynamometer, is made to whirl in a circular orbit within the volute. The measured force is expressed as the sum of a steady radial force and an unsteady force due to the eccentric motion of the impeller. These forces were measured in separate tests on a centrifugal pump with radically increased shroud clearance, a two-dimensional impeller, and an impeller with an inducer, the impeller of the HPOTP (High Pressure Oxygen Turbopump) of the SSME (Space Shuttle Main Engine). In each case, a destabilizing force was observed over a region of positive whirl.

  16. [Hemodynamic analysis of a centrifugal blood pump].

    Science.gov (United States)

    Wang, Yang; Yang, Ming; Xu, Zihao; Zhuang, Xiaoqi; Li, Qilei; Xu, Liang

    2015-01-01

    This paper built the mathematical model of a centrifugal blood pump, which was designed by ourselves, combined it with that of the human cardiovascular system and simulated the coupling system using Matlab. Then we set up the experiment platform, linked the blood pump to mock human cardiovascular system in case of three-stage heart failure, and measured aortic pressure and flow under different speed. The comparison between experiment results and simulation results not only indicates the coupling model is correct and the blood pump works well, but also shows that with the increase of blood pump speed, the pulsation of aortic pressure and flow will be reduced, this situation will affect the structure and function of blood vessels. PMID:26027287

  17. Multiphase flow modeling in centrifugal partition chromatography.

    Science.gov (United States)

    Adelmann, S; Schwienheer, C; Schembecker, G

    2011-09-01

    The separation efficiency in Centrifugal Partition Chromatography (CPC) depends on selection of a suitable biphasic solvent system (distribution ratio, selectivity factor, sample solubility) and is influenced by hydrodynamics in the chambers. Especially the stationary phase retention, the interfacial area for mass transfer and the flow pattern (backmixing) are important parameters. Their relationship with physical properties, operating parameters and chamber geometry is not completely understood and predictions are hardly possible. Experimental flow visualization is expensive and two-dimensional only. Therefore we simulated the flow pattern using a volume-of-fluid (VOF) method, which was implemented in OpenFOAM®. For the three-dimensional simulation of a rotating FCPC®-chamber, gravitational centrifugal and Coriolis forces were added to the conservation equation. For experimental validation the flow pattern of different solvent systems was visualized with an optical measurement system. The amount of mobile phase in a chamber was calculated from gray scale values of videos recorded by an image processing routine in ImageJ®. To visualize the flow of the stationary phase polyethylene particles were used to perform a qualitative particle image velocimetry (PIV) analysis. We found a good agreement between flow patterns and velocity profiles of experiments and simulations. By using the model we found that increasing the chamber depth leads to higher specific interfacial area. Additionally a circular flow in the stationary phase was identified that lowers the interfacial area because it pushes the jet of mobile phase to the chamber wall. The Coriolis force alone gives the impulse for this behavior. As a result the model is easier to handle than experiments and allows 3D prediction of hydrodynamics in the chamber. Additionally it can be used for optimizing geometry and operating parameters for given physical properties of solvent systems. PMID:21324465

  18. Analysis of centrifugal convection in rotating pipes

    Science.gov (United States)

    Shtern, Vladimir; Zimin, Valery; Hussain, Fazle

    2001-08-01

    New exact solutions, obtained for centrifugal convection of a compressible fluid in pipes and annular pipes, explain axially elongated counterflow and energy separation—poorly understood phenomena occurring in vortex devices, e.g., hydrocyclones and Ranque tubes. Centrifugal acceleration (which can be up to 106 times gravity in practical vortex tubes), combined with an axial gradient of temperature (even small), induces an intense flow from the cold end to the hot end along the pipe wall and a backflow near the axis. To account for large density variations in vortex devices, we use the axial temperature gradient as a small parameter instead of the Boussinesq approximation. For weak pipe rotation, the swirl is of solid-body type and solutions are compact: vz/vza=1-4y2+3y4 and (T-Tw)/(Ta-Tw)=(1-y2)3; where y=r/rw, the subscripts w and a denote values of axial velocity vz, temperature T, and radial distance r, at the wall and on the axis. The axial gradient of pressure, being proportional to 3y2-1, has opposite directions near the wall, y=1, and near the axis, y=0; this explains the counterflow. With increasing pipe rotation, the flow starts to converge to the axis. This causes important new effects: (i) the density and swirl velocity maxima occur away from the wall (vortex core formation), (ii) the temperature near the axis becomes lower than near the wall (the Ranque effect), (iii) the axial gradient of temperature drops from the wall to the axis, and (iv) the total axial heat flux (Nu) reaches its maximum Numax≈4000 and then decreases as swirl increases. These features can be exploited for the development of a micro-heat-exchanger, e.g., for cooling computer chips.

  19. Tropic responses of Phycomyces sporangiophores to gravitational and centrifugal stimuli.

    Science.gov (United States)

    DENNISON, D S

    1961-09-01

    A low-speed centrifuge was used to study the tropic responses of Phycomyces sporangiophores in darkness to the stimulus of combined gravitational and centrifugal forces. If this stimulus is constant the response is a relatively slow tropic reaction, which persists for up to 12 hours. The response is accelerated by increasing the magnitude of the gravitational-centrifugal force. A wholly different tropic response, the transient response, is elicited by an abrupt change in the gravitational-centrifugal stimulus. The transient response has a duration of only about 6 min. but is characterized by a high bending speed (about 5 degrees /min.). An analysis of the distribution of the transient response along the growing zone shows that the active phase of the response has a distribution similar to that of the light sensitivity for the light-growth and phototropic responses. Experiments in which sporangiophores are centrifuged in an inert dense fluid indicate that the sensory mechanism of the transient response is closely related to the physical deformation of the growing zone caused by the action of the gravitational-centrifugal force on the sporangiophore as a whole. However, the response to a steady gravitational-centrifugal force is most likely not connected with this deformation, but is probably triggered by the shifting of regions or particles of differing density relative to one another inside the cell. PMID:13721903

  20. Uranium enrichment using gas centrifugation. An analysis focusing export control

    International Nuclear Information System (INIS)

    The Swedish Defence Research Agency, FOI, has performed a study on uranium enrichment by gas centrifugation. The theory and principles of gas centrifugation is described in this report and relevant equipment used in the process has been identified. Different aspects of operating a gas centrifuge facility - and its indicators - are also presented. The separation efficiency and the flow of material through a centrifuge are very small, and therefore, a large number of centrifuges in cascades is needed to produce a larger amount of enriched uranium within a reasonable time. Countries with nuclear weapons ambitions often show an interest in gas centrifuges to produce weapons grade uranium - if they have managed to acquire the technology - because of the efficiency of the process and since it is relatively easy to conceal. Most equipment used in gas centrifuge facilities is under export control to prevent clandestine uranium enrichment. The Nuclear Suppliers' Group has compiled lists of nuclear related equipment and components that are of importance to export control. The control lists have also been included in the EU legislation

  1. Performance analysis of mini centrifugal pump with splitter blades

    Science.gov (United States)

    Shigemitsu, T.; Fukutomi, J.; Wada, T.; Shinohara, H.

    2013-12-01

    Design method for a mini centrifugal pump is not established because the internal flow condition for these small-sized fluid machines is not clarified and conventional theory is not suitable for small-sized pumps. Then, a semi-open impeller for the mini centrifugal pump with 55mm impeller diameter is adopted in this research to take simplicity and maintenance into consideration. Splitter blades are adopted in this research to improve the performance and internal flow condition of mini centrifugal pump having large blade outlet angle. The performance tests are conducted with these rotors in order to investigate the effect of the splitter blades on the performance and internal flow condition of the mini centrifugal pump. A three dimensional steady numerical flow analysis is conducted to analyze rotor, volute efficiency and loss caused by a vortex. It is clarified from the experimental results that the performance of the mini centrifugal pump is improved by the effect of the splitter blades. Flow condition at outlet of the rotor becomes uniform and back flow regions are suppressed in the case with the splitter blades. Further, the volute efficiency increases and the vortex loss decreases. In the present paper, the performance of the mini centrifugal pump is shown and the flow condition is clarified with the results of the experiment and the numerical flow analysis. Furthermore, the performance analyses of the mini centrifugal pumps with and without the splitter blades are conducted.

  2. Purification of Sardinella sp., Oil: Centrifugation and Bentonite Adsorbent

    Directory of Open Access Journals (Sweden)

    S.H. Suseno

    2014-01-01

    Full Text Available Centrifugation and purification using adsorbents is one example of a fish oil refining techniques applied to reduce impurities of fish oil. The study aimed to determine the sardine oil quality before treatment, to determine yield of fish oil after centrifugation treatment and to determine the influence of centrifugation speed and bentonite concentration on sardine oil quality. Factorial design with two factors was used in this study. Level of free fatty acid and peroxide value before purification was 35.53% and 170 mEq/kg. Yield of fish oil after centrifugation treatment has been ranged from 17.42±3.56 to 76.33±0.21%. The best treatment which could reduce the peroxide value and total oxidation was a treatment with centrifugation speed at 6500 rpm and bentonite concentration at 3%. Peroxide value and total oxidation of its treatment was 25.00±0.00 and 51.43±0.01 mEq/kg. The lowest value of p-anisidine was 1.29±0.05 mEq/kg and its value could be found in a treatment with centrifugation speed at 4500 rpm and bentonite concentration at 5%. The level of free fatty acid after purification process was ranged from 27.35 to 34.69%. Oil clarity tended to increase with the increase of centrifugation speed and adsorbent concentration.

  3. The American Gas Centrifuge Past, Present, and Future

    Energy Technology Data Exchange (ETDEWEB)

    Waters, Dean

    2004-09-15

    The art of gas centrifugation was born in 1935 at the University of Virginia when Dr. Jesse Beams demonstrated experimentally the separation of chlorine isotopes using an ultra-high speed centrifuge. Dr. Beam’s experiment initiated work that created a rich history of scientific and engineering accomplishment in the United States in the art of isotope separation and even large scale biological separation by centrifugation. The early history of the gas centrifuge development was captured in a lecture and documented by Dr. Jesse Beams in 1975. Much of Dr. Beams lecture material is used in this paper up to the year 1960. Following work by Dr. Gernot Zippe at the University of Virginia between 1958 and 1960, the US government embarked on a centrifuge development program that ultimately led to the start of construction of the Gas Centrifuge Enrichment Plant in Piketon Ohio in the late 1970’s. The government program was abandoned in 1985 after investing in the construction of two of six planned process buildings, a complete supply chain for process and centrifuge parts, and the successful manufacture and brief operation of an initial complement of production machines that would have met 15 percent of the planned capacity of the constructed process buildings. A declining market for enriched uranium, a glut of uranium enrichment capacity worldwide, and the promise of a new laser based separation process factored in the decision to stop the government program. By the late 1990’s it had become evident that gas centrifugation held the best promise to produce enriched uranium at low cost. In1999, the United States Enrichment Corporation undertook an initiative to revive the best of the American centrifuge technology that had been abandoned fourteen years earlier. This is an exciting story and one that when complete will enable the United States to maintain its domestic supply and to be highly competitive in the world market for this important energy commodity. (auth)

  4. Centrifugal Casting Features/Metallurgical Characterization of Aluminum Alloys

    International Nuclear Information System (INIS)

    This paper deals with the study of centrifugal effects on aluminium castings under high G values. Most of the studies in this domain (FGMs obtained by centrifugal casting) deal with functionally graded composites reinforced with a solid phase such as silicon particles or others. However, in this study it will be shown that unreinforced aluminium alloys may be significantly influenced by the centrifugal effect and that functionally graded castings are also obtained. It has been observed that the centrifugal effect may increase in some alloys, depending on the relative position in the castings, the rupture strength by approx. 50%, and rupture strain by about 300%, as compared to the gravity casting technique. The Young's modulus may also increase by about 20%. It has also been reported that in vertical centrifugal castings there are mainly three aspects that affect the components thus obtained, namely: fluid dynamics; vibration (inherent to the system); and centrifugal force. These features have a different effect on the castings depending on the aluminium alloy. In this paper, an analysis of the most important effects of the centrifugal casting process on metallurgical features is conducted. A solidification characterization at several points along the mould will be made in order to have an accurate idea of both the fluid dynamics inside the mould during the casting and the solidification behavior in different parts of the component. These two analyses will be related to the metallurgical properties (phase distribution; SDAS; eutectic silicon content and shape, pores density and shape) along the component and mainly along the direction of the centrifugal pressure. A comparison between castings obtained by both centrifugal casting technique and gravity casting technique is made for reference (gravity casting)

  5. Centrifugal Casting Features/Metallurgical Characterization of Aluminum Alloys

    Science.gov (United States)

    Chirita, G.; Stefanescu, I.; Soares, D.; Cruz, D.; Silva, F. S.

    2008-02-01

    This paper deals with the study of centrifugal effects on aluminium castings under high G values. Most of the studies in this domain (FGMs obtained by centrifugal casting) deal with functionally graded composites reinforced with a solid phase such as silicon particles or others. However, in this study it will be shown that unreinforced aluminium alloys may be significantly influenced by the centrifugal effect and that functionally graded castings are also obtained. It has been observed that the centrifugal effect may increase in some alloys, depending on the relative position in the castings, the rupture strength by approx. 50%, and rupture strain by about 300%, as compared to the gravity casting technique. The Young's modulus may also increase by about 20%. It has also been reported that in vertical centrifugal castings there are mainly three aspects that affect the components thus obtained, namely: fluid dynamics; vibration (inherent to the system); and centrifugal force. These features have a different effect on the castings depending on the aluminium alloy. In this paper, an analysis of the most important effects of the centrifugal casting process on metallurgical features is conducted. A solidification characterization at several points along the mould will be made in order to have an accurate idea of both the fluid dynamics inside the mould during the casting and the solidification behavior in different parts of the component. These two analyses will be related to the metallurgical properties (phase distribution; SDAS; eutectic silicon content and shape, pores density and shape) along the component and mainly along the direction of the centrifugal pressure. A comparison between castings obtained by both centrifugal casting technique and gravity casting technique is made for reference (gravity casting).

  6. Ocular counterrolling induced by centrifugation during orbital space flight

    Science.gov (United States)

    Moore, S. T.; Clement, G.; Raphan, T.; Cohen, B.

    2001-01-01

    During the 1998 Neurolab mission (STS-90), four astronauts were exposed to interaural centripetal accelerations (Gy centrifugation) of 0.5 g and 1 g during rotation on a centrifuge, both on Earth and during orbital space flight. Subjects were oriented either left-ear out or right-ear out, facing or back to motion. Binocular eye movements were measured in three dimensions using a video technique. On Earth, tangential centrifugation that produces 1 g of interaural linear acceleration combines with gravity to tilt the gravitoinertial acceleration (GIA) vector 45 degrees in the roll plane relative to the head vertical, generating a summed vector of 1.4 g. Before flight, this elicited mean ocular counterrolling (OCR) of 5.7 degrees. Due to the relative absence of gravity during flight, there was no linear acceleration along the dorsoventral axis of the head. As a result, during in-flight centrifugation, gravitoinertial acceleration was strictly aligned with the centripetal acceleration along the interaural axis. There was a small but significant decrease (mean 10%) in the magnitude of OCR in space (5.1 degrees). The magnitude of OCR during postflight 1 g centrifugation was not significantly different from preflight OCR (5.9 degrees). Findings were similar for 0.5 g centrifugation, but the OCR magnitude was approximately 60% of that induced by centrifugation at 1 g. OCR during pre- and postflight static tilt was not significantly different and was always less than OCR elicited by centrifugation of Earth for an equivalent interaural linear acceleration. In contrast, there was no difference between the OCR generated by in-flight centrifugation and by static tilt on Earth at equivalent interaural linear accelerations. These data support the following conclusions: (1) OCR is generated predominantly in response to interaural linear acceleration; (2) the increased OCR during centrifugation on Earth is a response to the head dorsoventral 1 g linear acceleration component, which

  7. Separation of Nanoparticles in Aqueous Multiphase Systems through Centrifugation

    KAUST Repository

    Akbulut, Ozge

    2012-08-08

    This paper demonstrates the use of aqueous multiphase systems (MuPSs) as media for rate-zonal centrifugation to separate nanoparticles of different shapes and sizes. The properties of MuPSs do not change with time or during centrifugation; this stability facilitates sample collection after separation. A three-phase system demonstrates the separation of the reaction products (nanorods, nanospheres, and large particles) of a synthesis of gold nanorods, and enriches the nanorods from 48 to 99% in less than ten minutes using a benchtop centrifuge. © 2012 American Chemical Society.

  8. Investigation on complete characteristics and hydraulic transient of centrifugal pump

    International Nuclear Information System (INIS)

    An improved method was developed to obtain the complete characteristic of centrifugal pump. The conversion formula of complete characteristics is established based on the normal performance curve. An example was presented to illuminate the new method, and the complete characteristic curves of 14SA-10 centrifugal pump were obtained by the new method. The hydraulic transient of the centrifugal pump failure and start-up was simulated by method of characteristics (MOC), which quote the complete characteristics data. The results show that the inversion method is available to obtain the complete pump characteristic curves provided the normal performance curve. For hydraulic transient simulation, more accurate numerical result can be obtained, if the new model is adopted to convert the experimental normal performance curve to complete characteristics curve of centrifugal pump

  9. Comparative analysis of discrete exosome fractions obtained by differential centrifugation

    DEFF Research Database (Denmark)

    Jeppesen, Dennis Kjølhede; Hvam, Michael L; Primdahl-Bengtson, Bjarke;

    2014-01-01

    BACKGROUND: Cells release a mixture of extracellular vesicles, amongst these exosomes, that differ in size, density and composition. The standard isolation method for exosomes is centrifugation of fluid samples, typically at 100,000×g or above. Knowledge of the effect of discrete...... ultracentrifugation speeds on the purification from different cell types, however, is limited. METHODS: We examined the effect of applying differential centrifugation g-forces ranging from 33,000×g to 200,000×g on exosome yield and purity, using 2 unrelated human cell lines, embryonic kidney HEK293 cells and bladder...... of phenol red and cleared by 200,000×g overnight centrifugation. The centrifugation tube fill level impacted the sedimentation efficacy. Comparative analysis by NTA, protein quantification, and detection of exosomal and contamination markers identified differences in vesicle size, concentration...

  10. Confusion around the tidal force and the centrifugal force

    CERN Document Server

    Matsuda, Takuya; Boffin, Henri M J

    2015-01-01

    We discuss the tidal force, whose notion is sometimes misunderstood in the public domain literature. We discuss the tidal force exerted by a secondary point mass on an extended primary body such as the Earth. The tidal force arises because the gravitational force exerted on the extended body by the secondary mass is not uniform across the primary. In the derivation of the tidal force, the non-uniformity of the gravity is essential, and inertial forces such as the centrifugal force are not needed. Nevertheless, it is often asserted that the tidal force can be explained by the centrifugal force. If we literally take into account the centrifugal force, it would mislead us. We therefore also discuss the proper treatment of the centrifugal force.

  11. Fluent-based numerical simulation of flow centrifugal fan

    Institute of Scientific and Technical Information of China (English)

    LI Xian-zhang

    2011-01-01

    Testing centrifugal fan flow field by physical laboratory is difficult because the testing system is complex and the workload is heavy, and the results observed by naked-eye deviates far from the actual value. To address this problem, the computational fluid dynamics software FLUENT was applied to establish three-dimensional model of the centrifugal fan. The numeral model was verified by comparing simulation data to experimental data. The pressure centrifugal fan and the speed changes in distribution in centrifugal fan was simulated by computational fluid dynamics software FLUENT. The simulation results show that the gas flow velocity in the impeller increases with impeller radius increase. Static pressure gradually increases when gas from the fan access is imported through fan impeller leaving fans.

  12. Experimental study on cavitation in centrifugal pump impellers

    International Nuclear Information System (INIS)

    Investigations concerning cavitation in centrifugal impellers were carried out in a closed circuit. The value of net positive suction head (NPSH) at different head drops and at breakdown were used to verify the affinity laws

  13. Method and apparatus for separating gas mixture by centrifuging

    International Nuclear Information System (INIS)

    A process and a centrifuge are provided for separating a gas mixture having different molecular weights into a light fraction and a heavy fraction. The process comprises the steps of introducing the gas mixture into at least one intermediate space formed between at least two concentric rotors, and separating the gas mixture into a light fraction and a heavy fraction by subjecting the gas mixture to centrifugal forces by rotation of the concentric rotors. The centrifuge comprises at least two concentric rotors rotatably in a housing and defining between them one or more intermediate spaces, means for driving the rotors, and means for introducing the gas mixture into the or each intermediate space, whereby in operation the mixture is subjected to centrifugal forces

  14. MULTIOBJECT OPTIMIZATION OF A CENTRIFUGAL IMPELLER USING EVOLUTIONARY ALGORITHMS

    Institute of Scientific and Technical Information of China (English)

    Li Jun; Liu Lijun; Feng Zhenping

    2004-01-01

    Application of the multiobjective evolutionary algorithms to the aerodynamic optimization design of a centrifugal impeller is presented. The aerodynamic performance of a centrifugal impeller is evaluated by using the three-dimensional Navier-Stokes solutions. The typical centrifugal impeller is redesigned for maximization of the pressure rise and blade load and minimization of the rotational total pressure loss at the given flow conditions. The B閦ier curves are used to parameterize the three-dimensional impeller blade shape. The present method obtains many reasonable Pareto optimal designs that outperform the original centrifugal impeller. Detailed observation of the certain Pareto optimal design demonstrates the feasibility of the present multiobjective optimization method tool for turbomachinery design.

  15. The gas centrifuge and the nonproliferation of nuclear weapons

    International Nuclear Information System (INIS)

    The gas centrifuge is a particularly challenging technology for the institutions of the existing nonproliferation regime. Centrifuge facilities can be reconfigured for the production of weapon-grade uranium in a comparatively short time-frame, while clandestine facilities are virtually impossible to detect with technical intelligence tools. A potential expansion in nuclear power and the natural maturing of states technical abilities suggest a world where centrifuge proliferation could become an even more serious threat to global security. This overview reviews the proliferation-relevant technical characteristics of the gas centrifuge and examines how effective control strategies must differ from traditional approaches. A well-informed policymaking process is needed to address these issues. We outline current gaps in understanding that ought to be closed in order to formulate robust nonproliferation policies. (authors)

  16. Centrifuging Step-Screw Conveyor for Regolith Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A variety of ISRU operations will utilize lunar regolith as feedstock. The proposed centrifuging step-screw conveyor concept will provide a well controlled robust,...

  17. DESIGN AND FABRICATION OF A CENTRIFUGAL CASTING MACHINE

    Directory of Open Access Journals (Sweden)

    Adedipe Oyewole

    2011-12-01

    Full Text Available The design and fabrication of a centrifugal casting machine was successfully carried out. The operation of the machine was based on the principle of centrifugal force. Suitable design theory, analysis and calculation were adopted carried out in the course of the work. The mold is bolted to the base plate which can rotate at moderatespeeds thereby forcing the molten metal against the inner walls of the mold. This machine could be used to cast small engineering components. The centrifugal force on the machine was determined to be 3207.3N, while the required power on the machine was 854.7W. A test was carried out on the fabricated centrifugal casting machine with aluminum alloy and the machine was able to cast 6kg of aluminum alloy and the casting was successful.

  18. Manufacture of hollow ingots using centrifugal casting machines

    Science.gov (United States)

    Pomeshchikov, A. G.; Greneva, T. S.; Baidachenko, V. I.; Berezin, V. I.

    2010-12-01

    Centrifugal machines are proposed for the foundry created at the Almalyk Mining and Smelting Factory in order to produce hollow ingots of a liquid metal made by remelting of consumable electrodes in a refractory accumulating crucible.

  19. Measurement of ground shock in explosive centrifuge model tests

    International Nuclear Information System (INIS)

    Los Alamos National Laboratory has begun a project to simulate the formation and collapse of underground cavities produced by nuclear explosions using chemical explosions at much smaller scale on a large geotechnical centrifuge. Use of a centrifuge for this project presents instrumentation challenges which are not encountered in tests at similar scale off of the centrifuge. Electromagnetic velocity measuring methods which have been very successfully applied to such models at 1 g would be very difficult, if not impossible, to implement at 100 g. We are investigating the feasibility of other techniques for monitoring the ground shock in small-scale tests including accelerometers, stress gauges, dynamic strain meters and small, mutual-inductance particle velocity gauges. Initial results indicate that some of these techniques can be adapted for centrifuge applications. 17 references, 4 figures

  20. Centrifugal Liquid/Gas Separator With Phase Detectors

    Science.gov (United States)

    Schneider, Steven J.

    1994-01-01

    Centrifugal liquid/gas separator that includes phase (liquid or gas) detectors helps ensure exclusiveness of each phase at its assigned outlet. Acoustic sensors in centrifugal liquid/gas separator measure speeds of sound in nominally pure liquid and nominally pure gas at liquid and gas outlets respectively. When speed of sound is that of pure liquid or gas, valve opens to let liquid or gas flow out.

  1. Process intensification: water electrolysis in a centrifugal acceleration field

    OpenAIRE

    Lao, Liyun; Ramshaw, C.; Yeung, Hoi

    2011-01-01

    Intensification of hydrogen production by carrying out water electrolysis in a centrifugal acceleration field has been demonstrated. A prototype single cell rotary water electrolyser was constructed, and a number of design challenges with regard to the practical application were addressed. The rotary electrolyser was tested over a range of current density, centrifugal acceleration, electrolyte concentration, temperature, and electrode geometry. The test results showed that a...

  2. Design Method for Channel Diffusers of Centrifugal Compressors

    OpenAIRE

    Mykola Kalinkevych; Andriy Skoryk

    2013-01-01

    The design method for channel diffusers of centrifugal compressors, which is based on the solving of the inverse problem of gas dynamics, is presented in the paper. The concept of the design is to provide high pressure recovery of the diffuser by assuming the preseparation condition of the boundary layer along one of the channel surfaces. The channel diffuser was designed with the use of developed method to replace the vaned diffuser of the centrifugal compressor model stage. The numerical si...

  3. Design and Characterization of a Centrifugal Compressor Surge Test Rig

    OpenAIRE

    Kin Tien Lim; Se Young Yoon; Christopher P. Goyne; Zongli Lin; Allaire, Paul E.

    2011-01-01

    A detailed description of a new centrifugal compressor surge test rig is presented. The objective of the design and development of the rig is to study the surge phenomenon in centrifugal compression systems and to investigate a novel method of surge control by active magnetic bearing servo actuation of the impeller axial tip clearance. In this paper, we focus on the design, initial setup, and testing of the rig. The latter two include the commissioning of the rig and the experimental characte...

  4. Non Adiabatic Centrifugal Compressor Gas Dynamic Performance Definition

    OpenAIRE

    Soldatova, Kristina

    2014-01-01

    Most centrifugal compressors operate in conditions with negligible heat transfer (adiabatic compression). Their plant tests conditions are similar or close to adiabatic conditions. Test regulations establish measures to diminish influence of a heat transfer “compressor body – atmospheric air” to an exit temperature. Therefore a temperature rise in a compressor is used to calculate a work input coefficient and efficiency. Unlike it high pressure centrifugal compressors of gas turbines and supe...

  5. Fabrication of bulk metallic glasses by centrifugal casting method

    Directory of Open Access Journals (Sweden)

    R. Nowosielski

    2007-01-01

    Full Text Available Purpose: The aim of the present work is characterization of the centrifugal casting method, apparatus andproduced amorphous materials, which are also known as bulk metallic glassesDesign/methodology/approach: The studied centrifugal casting system consists of two main parts: castingapparatus and injection system of molten alloy. The described centrifugal casting method was presented bypreparing a casting apparatus “CentriCast – 5”. The apparatus includes a cylindrical copper mold, which isrotated by a motor. The transmission allows to changing the speed of rotating mold.Findings: Bulk metallic glasses are a novel class of engineering materials, which exhibit excelent mechanical,thermal, magnetic and corrosion properties. Centrifugal casting is a useful method to produce bulk amorphousmaterials in form of rings, tubes or cylindrical parts. Presented centrifugal casting method and casting apparatushas been prepared to fabricate the samples of bulk metallic glass in form of rings with an outer diameter of 25mm and controlled thicknesses by changing the weight of the molten alloy.Research limitations/implications: Studied centrifugal casting method and casting apparatus has beenprepared to fabricate the samples of bulk metallic glass. For future research a characterization of microstructureand properties of prepared material will be performed.Practical implications: The centrifugal casting is a useful process to produce bulk amorphous materials in formof rings, tubes or graded amorphous matrix composites. It seems to be a very simple method, which allows toobtain BMG materials.Originality/value: The centrifugal casting method allows to produce bulk amorphous rings with thicknessabove 1-mm.

  6. Numerical Calculation on Cavitation Pressure Pulsation in Centrifugal Pump

    OpenAIRE

    Weidong Shi; Chuan Wang; Wei Wang; Bing Pei

    2014-01-01

    In order to study the internal flow in centrifugal pump when cavitation occurs, numerical calculation of the unsteady flow field in the WP7 automobile centrifugal pump is conducted based on the Navier-Stokes equations with the RNG k-ε turbulence model and Zwart-Gerber-Belamri cavitation model. The distributions of bubble volume fraction and pressure pulsation laws in the pump are analyzed when cavitation occurs. The conclusions are as follows: the bubble volume fraction is larger on the sucti...

  7. A new practice in fruit trees: Centrifugal training system

    OpenAIRE

    Ersin ATAY; Pierre Eric LAURI

    2013-01-01

    The choice of the training system is a rather important decision for yield, fruit quality and profitability. There were dramatic changes in concepts for apple training in the last years. Centrifugal training system which was one of the innovations was developed in the beginning of the 2000’s in France. SolAxe training system forms the main part of this training system. The most innovative aspect of the Centrifugal training system is the artificial extinction technique. This technique is carri...

  8. Centrifuge for separation of enriched 235U

    International Nuclear Information System (INIS)

    The invention claim is for a centrifuge for enrichment of 235U characterized by: (1) a rotor provided with hollow upper and lower rotating shafts which serve, respectively, as a feed conduit for a light inert-gas/UF6-gas mixture and as a discharge conduit for the light inert gas, and provided with top and bottom end-plates having vents for discharging the 235U-enriched gas and 235U-depleted gas in equal amounts; (2) a fixed outer jacket which accomodates the freely rotating rotor in such a manner as to form annular slits between the shoulders of the rotor and the inner wall of the jacket, and is equipped at the mid-section with gas-inlet conduits for injecting the inert light gas into the annular space between the rotor and the jacket through the openings provided at the tips of the conduits in the direction of the rotor's rotation and also tangentially to the rotor, and is further equipped near the top and bottom with gas-outlet conduits fitted with control valves; and (3) heating and cooling units installed at the top and bottom of the annualr space between the rotor and the jacket. (U.S.)

  9. Improvements to self priming centrifugal pumps

    International Nuclear Information System (INIS)

    This invention concerns a self priming centrifugal pump for dangerous liquids, high radioactive, flammable, explosive and very toxic liquids for instance, for which it is necessary to enclose the equipment in a biological protection cell, as is done in the nuclear industry (reprocessing of irradiated fuels). The device ensures that all the gases and radioactive and toxic aerosols present in the delivery pipe are returned through leak tight pipes into the drawing tank, the gaseous top of which is connected to a gas processing plant, without it being possible for them to escape from the plant and contaminate the cell or penetrate into an apparatus such as a filter under pressure that cannot work in their presence. The pump impeller cage is provided with horizontal partitions which define the pump body, a lower suction chamber, a middle delivery chamber and an upper venting chamber respectively connected to a suction pipe, a delivery pipe and a venting pipe connected to a gas processing unit significantly at atmospheric pressure. Leak tightness between these different chambers and the body of the pump is provided by three ring seals resting on the truncated part of the pump body as well as by an internal gasket fixed between the motor shaft and the upper wall of the venting chamber. As all the pipes are attached to the fixed pump body, the removable unit may be easily taken out or placed back simply by moving it vertically upwards

  10. Investigation of Flow in a Centrifugal Pump

    Science.gov (United States)

    Fischer, Karl

    1946-01-01

    The investigation of the flow in a centrifugal pump indicated that the flow patterns in frictional fluid are fundamentally different from those in frictionless fluid. In particular, the dead air space adhering to the section side undoubtedly causes a reduction of the theoretically possible delivery head. The velocity distribution over a parallel circle is also subjected to a noticeable change as a result of the incomplete filling of the passages. The relative velocity on the pressure side of the vane, which for passages completely filled with active flow would differ little from zero even at comparatively lower than normal delivery volume, is increased, so that no rapid reverse flow occurs on the pressure side of the vane even for smaller delivery volume. It was established, further, that the flow ceases to be stationary for very small quantities of water. The inflow to the impeller can be regarded as radial for the operating range an question. The velocity triangles at the exit are subjected to a significant alteration in shape ae a result of the increased peripheral velocity, which may be of particular importance in the determination of the guide vane entrance angle.

  11. Considerations on safeguards approach for small centrifuge enrichment facilities

    International Nuclear Information System (INIS)

    The safeguards' objectives for enrichment facilities encompass the detection of the diversion of declared nuclear material and of facility misuse. The safeguard's approach presently applied for commercial centrifuge enrichment facilities is based on the Hexa partite Project and seems not to be directly applicable to cases of small plants. Since ABACC started its operation one of the main problems faced was the application of safeguards to small centrifuge enrichment plants for testing centrifuges in cascade mode or for small LEU production. These plants consist of a few fully independent cascades, does not operate in a routine basis and panels prevent visual access to the centrifuges and their surroundings for preserving sensitive information. For such plants misuse scenarios seems to dominate, particularly those associated with feeding the plant with undeclared LEU. This paper presents a concise analysis of misuse strategies in small centrifuge facility and alternative safeguard's approach, describing the main control elements to be applied. The particularities arising from the existence of panels or boxes covering the centrifuges are specifically addressed. Two alternatives approaches based on the application of a transitory perimeter control to increase the effectiveness of unannounced inspection and on the application of permanent perimeter control are presented. (author)

  12. Centrifugal potential energy : an astounding renewable energy concept

    Energy Technology Data Exchange (ETDEWEB)

    Oduniyi, I.A. [Aled Conglomerate Nigeria Ltd., Lagos (Nigeria)

    2010-07-01

    A new energy concept known as centrifugal potential energy was discussed. This new energy concept is capable of increasing the pressure, temperature and enthalpy of a fluid, without having to apply work or heat transfer to the fluid. It occurs through a change in the centrifugal potential energy of the flowing fluid in a rotating frame of reference or a centrifugal force field, where work is performed internally by the centrifugal weight of the fluid. This energy concept has resulted in new energy equations, such as the Rotational Frame Bernoulli's Equation for liquids and the Rotational Frame Steady-Flow Energy Equation for gases. Applications of these equations have been incorporated into the design of centrifugal field pumps and compressors. Rather than compressing a fluid with a physical load transfer, these devices can compress a fluid via the effect of centrifugal force applied to the object. A large amount of energy is therefore produced when this high pressure compressed working fluid expands in a turbine. When water is used as the working fluid, it could reach renewable energy densities in the range of 25-100 kJ/kg of water. When atmospheric air is used, it could reach energy densities in the range of 500-1,500 kJ/kg of air.

  13. Fabrication of Al/Diamond Particles Functionally Graded Materials by Centrifugal Sintered-Casting Method

    International Nuclear Information System (INIS)

    The continuous graded structure of functionally graded materials (FGMs) can be created under a centrifugal force. Centrifugal sintered-casting (CSC) method, proposed by the authors, is one of the fabrication methods of FGM under centrifugal force. This method is a combination of the centrifugal sintering method and centrifugal casting method. In this study, Al/diamond particle FGM was fabricated by the proposed method.

  14. Fabrication of Al/Diamond Particles Functionally Graded Materials by Centrifugal Sintered-Casting Method

    Science.gov (United States)

    Watanabe, Yoshimi; Shibuya, Masafumi; Sato, Hisashi

    2013-03-01

    The continuous graded structure of functionally graded materials (FGMs) can be created under a centrifugal force. Centrifugal sintered-casting (CSC) method, proposed by the authors, is one of the fabrication methods of FGM under centrifugal force. This method is a combination of the centrifugal sintering method and centrifugal casting method. In this study, Al/diamond particle FGM was fabricated by the proposed method.

  15. A wireless centrifuge force microscope (CFM) enables multiplexed single-molecule experiments in a commercial centrifuge.

    Science.gov (United States)

    Hoang, Tony; Patel, Dhruv S; Halvorsen, Ken

    2016-08-01

    The centrifuge force microscope (CFM) was recently introduced as a platform for massively parallel single-molecule manipulation and analysis. Here we developed a low-cost and self-contained CFM module that works directly within a commercial centrifuge, greatly improving accessibility and ease of use. Our instrument incorporates research grade video microscopy, a power source, a computer, and wireless transmission capability to simultaneously monitor many individually tethered microspheres. We validated the instrument by performing single-molecule force shearing of short DNA duplexes. For a 7 bp duplex, we observed over 1000 dissociation events due to force dependent shearing from 2 pN to 12 pN with dissociation times in the range of 10-100 s. We extended the measurement to a 10 bp duplex, applying a 12 pN force clamp and directly observing single-molecule dissociation over an 85 min experiment. Our new CFM module facilitates simple and inexpensive experiments that dramatically improve access to single-molecule analysis. PMID:27587129

  16. Cerebral Hypoperfusion Precedes Nausea During Centrifugation

    Science.gov (United States)

    Serrador, Jorge M.; Schlegel, Todd T.; Black, F. Owen; Wood, Scott J.

    2004-01-01

    Nausea and motion sickness are important operational concerns for aviators and astronauts. Understanding underlying mechanisms associated with motion sickness may lead to new treatments. The goal of this work was to determine if cerebral blood flow changes precede the development of nausea in motion sick susceptible subjects. Cerebral flow velocity in the middle cerebral artery (transcranial Doppler), blood pressure (Finapres) and end-tidal CO2 were measured while subjects were rotated on a centrifuge (250 degrees/sec). Following 5 min of rotation, subjects were translated 0.504 m off-center, creating a +lGx centripetal acceleration in the nasal-occipital plane. Ten subjects completed the protocol without symptoms while 5 developed nausea (4 while 6ff-center and 1 while rotating on-center). Prior to nausea, subjects had significant increases in blood pressure (+13plus or minus 3 mmHg, P less than 0.05) and cerebrovascular resistance (+46 plus or minus 17%, P less than 0.05) and decreases in cerebral flow velocity both in the second (-13 plus or minus 4%) and last minute (-22 plus or minus 5%) before symptoms (P less than 0.05). In comparison, controls demonstrated no change in blood pressure or cerebrovascular resistance in the last minute of off-center rotation and only a 7 plus or minus 2% decrease in cerebral flow velocity. All subjects had significant hypocapnia (-3.8 plus or minus 0.4 mmHg, P less than 0.05), however this hypocapnia could not fully explain the cerebral hypoperfusion associated with the development of nausea. These data indicate that reductions in cerebral blood flow precede the development of nausea. Further work is necessary to determine what role cerebral hypoperfusion plays in motion sickness and whether cerebral hypoperfusion can be used to predict the development of nausea in susceptible individuals.

  17. Parametric representation of centrifugal pump homologous curves

    Energy Technology Data Exchange (ETDEWEB)

    Veloso, Marcelo A.; Mattos, Joao R.L. de, E-mail: velosom@cdtn.br, E-mail: jrmattos@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-07-01

    Essential for any mathematical model designed to simulate flow transient events caused by pump operations is the pump performance data. The performance of a centrifugal pump is characterized by four basic quantities: the rotational speed, the volumetric flow rate, the dynamic head, and the hydraulic torque. The curves showing the relationships between these four variables are called the pump characteristic curves. The characteristic curves are empirically developed by the pump manufacturer and uniquely describe head and torque as functions of volumetric flow rate and rotation speed. Because of comprising a large amount of points, this configuration is not suitable for computational purposes. However, it can be converted to a simpler form by the development of the homologous curves, in which dynamic head and hydraulic torque ratios are expressed as functions of volumetric flow and rotation speed ratios. The numerical use of the complete set of homologous curves requires specification of sixteen partial curves, being eight for the dynamic head and eight for the hydraulic torque. As a consequence, the handling of homologous curves is still somewhat complicated. In solving flow transient problems that require the pump characteristic data for all the operation zones, the parametric form appears as the simplest way to deal with the homologous curves. In this approach, the complete characteristics of a pump can be described by only two closed curves, one for the dynamic head and other for the hydraulic torque, both in function of a single angular coordinate defined adequately in terms of the quotient between volumetric flow ratio and rotation speed ratio. The usefulness and advantages of this alternative method are demonstrated through a practical example in which the homologous curves for a pump of the type used in the main coolant loops of a pressurized water reactor (PWR) are transformed to the parametric form. (author)

  18. [The analytical setting of rotary speed of centrifuge rotor and centrifugation time in chemical, biochemical and microbiological practice].

    Science.gov (United States)

    Zolotarev, K V

    2012-08-01

    The researchers happen to face with suspensions in their chemical, biochemical and microbiological practice. The suspensions are the disperse systems with solid dispersed phase and liquid dispersion medium and with dispersed phase particle size > 100 nm (10-7 m). Quite often the necessity occurs to separate solid particles from liquid. To use for this purpose the precipitation in gravitation field can make the process to progress too long. In this respect an effective mode is the precipitation in the field of centrifugal forces--the centrifugation. The rotary speed of centrifuge rotor and centrifugation time can be set analytically using regularities of general dynamics and hydrodynamics. To this effect, should be written and transformed the equation of First and Second Newton Laws for suspension particle being in the field of centrifugal forces and forces of resistance of liquid and vessel wall. The force of liquid resistance depends on particle motion condition in liquid. To determine the regimen the Archimedes and Reynolds numerical dimensionless criteria are to be applied. The article demonstrates the results of these transformations as analytical inverse ratio dependence of centrifugation time from rotary speed. The calculation of series of "rate-time" data permits to choose the optimal data pair on the assumption of centrifuge capacity and practical reasonability. The results of calculations are validated by actual experimental data hence the physical mathematical apparatus can be considered as effective one. The setting progress depends both from parameter (Reynolds criterion) and data series calculation. So, the most convenient way to apply this operation is the programming approach. The article proposes to use the program Microsoft Excel and VBA programming language for this purpose. The possibility to download the file from Internet to use it for fast solution is proposed. PMID:23097986

  19. A fuzzy controlled three-phase centrifuge for waste separation

    International Nuclear Information System (INIS)

    The three-phase centrifuge technology discussed in this paper was developed by Neal Miller, president of Centech, Inc. The three-phase centrifuge is an excellent device for cleaning up oil field and refinery wastes which are typically composed of hydrocarbons, water, and solids. The technology is unique. It turns the waste into salable oil, reusable water, and landfill-able solids. No secondary waste is produced. The problem is that only the inventor can set up and run the equipment well enough to provide an optimal cleanup. Demand for this device has far exceeded a one man operation. There is now a need for several centrifuges to be operated at different locations at the same time. This has produced a demand for an intelligent control system, one that could replace a highly skilled operator, or at least supplement the skills of a less experienced operator. The control problem is ideally suited to fuzzy logic, since the centrifuge is a highly complicated machine operated entirely by the skill and experience of the operator. A fuzzy control system was designed for and used with the centrifuge

  20. Development of a Feeder for Uninterrupted Centrifugation Studies

    Science.gov (United States)

    Mulenburg, Gerald M.; Vasques, Marilyn F.; Gundo, Daniel P.; Griffith, Jon B.; Wade, Charles E. (Technical Monitor)

    1994-01-01

    A specialized paste diet feeder was developed in support of a hypergravity (2G) centrifuge study. The centrifuge study was to be compared to a previously flown Russian Cosmos spaceflight so experimental parameters of the 14 day spaceflight had to be duplicated. In order to duplicate at hyper G an experiment that took place in weightlessness, all other conditions must be as identical as possible. Stopping the centrifuge to provide maintenance for the animals causes unacceptable changes in experimental research results. Thus the experimental protocol required the delivery of a designated amount of paste diet at regular intervals for a two week period without stopping the centrifuge. A centrifuge and a stationary control cage, each containing 10 laboratory rats, were fitted with feeders that were calibrated to provide 140 plus or minus 2g of paste diet every 6 hours. This paper describes development of the feeder design and results of its operation over the two week experiment. The design philosophy and details of the feeder system are provided with recommendations for future such devices.

  1. Centrifuge modelling - migration of radionuclides from engineered trenches

    International Nuclear Information System (INIS)

    This report provides an overview of some centrifuge small-scale physical model tests and 1g experimental and theoretical work relating to the sub-surface migration of a model pollutant (sodium chloride) from a notional prototype surface landfill of width 25 metres and depth 3 metres cut into a 20 metre deep layer of nominally uniform soil overlying a more permeable base layer. An introduction is given to the application of geotechnical centrifuge modelling techniques to pollutant migration studies. Experiments performed at 1/100th scale using the Cambridge 10 metre diameter Geotechnical Beam Centrifuge simulating transport through silt over prototype time periods of around 35 years, are summarised. Comparisons of data with calculations using early versions of the POLLUTE and MIGRATE computer codes are presented. An experiment at 1/400th scale using the new Cambridge Geotechnical Drum Centrifuge, involving transport through clay over a prototype time period of around 1000 years, is described. Potential future uses of centrifuge modelling techniques to simulate long-term migration through more complex hydrological environments are also discussed. (author)

  2. Unattended safeguards instrumentation at centrifuge enrichment plants

    International Nuclear Information System (INIS)

    As global uranium enrichment capacity under international safeguards expands, the International Atomic Energy Agency (IAEA) is challenged to develop effective safeguards approaches at gaseous centrifuge enrichment plants, particularly high‑capacity plants, while working within budgetary constraints. New safeguards approaches should meet the high‑level verification objectives for such facilities (i.e., timely detection of: diversion of declared material, excess production beyond declared amounts, and production of enrichment levels higher than declared), but should also strive for efficiency advantages in implementation, for both the IAEA and operators. Under the Agency’s State- level approach to safeguards implementation, the Agency needs a flexible toolbox of technologies, allowing tailoring of safeguards measures for each individual enrichment facility. In this paper, the potential roles and development status for three different types of unattended measurement instrumentation are discussed. On‑Line Enrichment Monitors (OLEM) could provide continuous enrichment measurement for 100% of the declared gas flowing through unit header pipes. Unattended Cylinder Verification Stations (UCVS) could provide unattended verification of the declared uranium mass and enrichment of 100% of the cylinders moving through the plant, but also apply and verify an ‘NDA Fingerprint’ to preserve verification knowledge on the contents of each cylinder throughout its life in the facility. Sharing of the operator’s load cell signals from feed and withdrawal stations could count all cylinders introduced to the process and provide periodic monitoring of the uranium mass balance for in‑process material. The integration of load cell, OLEM and UCVS data streams offers the possibility for 100% verification of declared cylinder flow, and enables the periodic verification of the declared 235U mass balance in the plant. These new capabilities would enhance the IAEA’s effectiveness

  3. Centrifugally activated bearing for high-speed rotating machinery

    Science.gov (United States)

    Post, Richard F.

    1994-01-01

    A centrifugally activated bearing is disclosed. The bearing includes an annular member that extends laterally and radially from a central axis. A rotating member that rotates about the central axis relative to the annular member is also included. The rotating member has an interior chamber that surrounds the central axis and in which the annular member is suspended. Furthermore, the interior chamber has a concave shape for retaining a lubricant therein while the rotating member is at rest and for retaining a lubricant therein while the rotating member is rotating. The concave shape is such that while the rotating member is rotating a centrifugal force causes a lubricant to be forced away from the central axis to form a cylindrical surface having an axis collinear with the central axis. This centrifugally displaced lubricant provides restoring forces to counteract lateral displacement during operation.

  4. Oscillatory Counter-Centrifugation: Effects of History and Lift Forces

    Science.gov (United States)

    Nadim, Ali

    2014-11-01

    This work is co-authored with my doctoral student Shujing Xu and is dedicated to the memory of my doctoral advisor Howard Brenner who enjoyed thought experiments related to rotating systems. Oscillatory Counter-Centrifugation refers to our theoretical discovery that within a liquid-filled container that rotates in an oscillatory manner about a fixed axis as a rigid body, a suspended particle can be made to migrate on average in the direction opposite to that of ordinary centrifugation. That is, a heavy (or light) particle can move toward (or away from) the rotation axis, when the frequency of oscillations is high enough. In this work we analyze the effects of the Basset history force and the Saffman lift force on particle trajectories and find that the counter-centrifugation phenomenon persists even when these forces are active.

  5. Investigation of Surge Behavior in a Micro Centrifugal Compressor

    Institute of Scientific and Technical Information of China (English)

    Shimpei MIZUKI; Yuichiro ASAGA; Yushi ONO; Hoshio TSUJITA

    2006-01-01

    This paper reports the experimental and theoretical study of the surge occurred in prototyping an ultra micro centrifugal compressor. As the first step, the 10 times size model of an ultra micro centrifugal compressor having the 40 mm outer diameter was designed and manufactured. The detailed experimental investigations for the transient behavior of surge with several different values of B parameter were carried out. The experimental results during the surge were compared with those obtained by the non-linear lumped parameter theory in order to validate the effectiveness of the theoretical surge model for the micro centrifugal compressor. As a result, the quite different behavior of the surge appeared for the different values of B both in the experiment and in the analysis.

  6. Fault diagnosis of monoblock centrifugal pump using SVM

    Directory of Open Access Journals (Sweden)

    V. Muralidharan

    2014-09-01

    Full Text Available Monoblock centrifugal pumps are employed in variety of critical engineering applications. Continuous monitoring of such machine component becomes essential in order to reduce the unnecessary break downs. At the outset, vibration based approaches are widely used to carry out the condition monitoring tasks. Particularly fuzzy logic, support vector machine (SVM and artificial neural networks were employed for continuous monitoring and fault diagnosis. In the present study, the application of SVM algorithm in the field of fault diagnosis and condition monitoring is discussed. The continuous wavelet transforms were calculated for different families and at different levels. The computed transformation coefficients form the feature set for the classification of good and faulty conditions of the components of centrifugal pump. The classification accuracies of different continuous wavelet families at different levels were calculated and compared to find the best wavelet for the fault diagnosis of the monoblock centrifugal pump.

  7. Numerical optimization for separation power of gas centrifuge

    International Nuclear Information System (INIS)

    In order to obtain higher separation power of the gas centrifuge, the code was developed to solve the flow-field of the counter-current to acquire the separation power, which was integrated with the iSight software, so a numerical optimization model for separation power was presented, in which the driver conditions and the geometry parameters of the waste baffle were optimized to get the maximum separation power using the sequential quadratic programming arithmetic, and the 12% higher results was acquired, which shows the feasibility of this method. The results also note that the separation power of gas centrifuge is sensitive to the driver conditions and the structure parameters of the waste baffle, so it is necessary to perform the optimization calculation for the certain gas centrifuge model. (authors)

  8. Design Optimization of a Centrifugal Fan with Splitter Blades

    Science.gov (United States)

    Heo, Man-Woong; Kim, Jin-Hyuk; Kim, Kwang-Yong

    2015-05-01

    Multi-objective optimization of a centrifugal fan with additionally installed splitter blades was performed to simultaneously maximize the efficiency and pressure rise using three-dimensional Reynolds-averaged Navier-Stokes equations and hybrid multi-objective evolutionary algorithm. Two design variables defining the location of splitter, and the height ratio between inlet and outlet of impeller were selected for the optimization. In addition, the aerodynamic characteristics of the centrifugal fan were investigated with the variation of design variables in the design space. Latin hypercube sampling was used to select the training points, and response surface approximation models were constructed as surrogate models of the objective functions. With the optimization, both the efficiency and pressure rise of the centrifugal fan with splitter blades were improved considerably compared to the reference model.

  9. Design Method for Single-Blade Centrifugal Pump Impeller

    Science.gov (United States)

    Nishi, Yasuyuki; Fujiwara, Ryota; Fukutomi, Junichiro

    The sewage pumps are demanded a high pump efficiency and a performance in passing foreign bodies. Therefore, the impeller used by these usages requires the large passed particle size (minimum particle size in the pump). However, because conventional design method of pump impeller results in small impeller exit width, it is difficult to be applied to the design of single-blade centrifugal pump impeller which is used as a sewage pump. This paper proposes a design method for single-blade centrifugal pump impeller. As a result, the head curve of the impeller designed by the proposed design method satisfied design specifications, and pump efficiency was over 62% more than conventional single-blade centrifugal pump impeller. By comparing design values with CFD analysis values, the suction velocity ratio of the design parameter agreed well with each other, but the relative velocity ratio did not agree due to the influence of the backflow of the impeller entrance.

  10. Parametric performance evaluation of a hydraulic centrifugal pump

    International Nuclear Information System (INIS)

    Parametric study of a hydraulic centrifugal pump with backward curved blades has been performed numerically using three-dimensional Reynolds-averaged Navier-Stokes equations. The shear stress transport turbulence model was used for analysis of turbulence. The finite volume method and an unstructured grid system were used for the numerical solution. The optimal grid system in the computational domain was selected through a grid dependency test. Tested parameters were related to the geometry of the impeller and volute: seven variables defining the hub and shroud contours and the blades angle of impeller, and two variables defining the inlet width and expansion angle of volute. The effects of these parameters on the hydrodynamic performance of the centrifugal pump have been investigated. It was found that the centrifugal water pump with the twisted blades has the enhancing efficiency compared to the straight blades pump

  11. Centrifuge Techniques and Apparatus for Transport Experiments in Porous Media

    Energy Technology Data Exchange (ETDEWEB)

    Earl D. Mattson; Carl D. Paler; Robert W. Smith; Markus Flury

    2010-06-01

    This paper describes experimental approaches and apparatus that we have developed to study solute and colloid transport in porous media using Idaho National Laboratory's 2-m radius centrifuge. The ex-perimental techniques include water flux scaling with applied acceleration at the top of the column and sub-atmospheric pressure control at the column base, automation of data collection, and remote experimental con-trol over the internet. These apparatus include a constant displacement piston pump, a custom designed liquid fraction collector based on switching valve technology, and modified moisture monitoring equipment. Suc-cessful development of these experimental techniques and equipment is illustrated through application to transport of a conservative tracer through unsaturated sand column, with centrifugal acceleration up to 40 gs. Development of such experimental equipment that can withstand high accelerations enhances the centrifuge technique to conduct highly controlled unsaturated solute/colloid transport experiments and allows in-flight liquid sample collection of the effluent.

  12. Space Station Centrifuge: A Requirement for Life Science Research

    Science.gov (United States)

    Smith, Arthur H.; Fuller, Charles A.; Johnson, Catherine C.; Winget, Charles M.

    1992-01-01

    A centrifuge with the largest diameter that can be accommodated on Space Station Freedom is required to conduct life science research in the microgravity environment of space. (This was one of the findings of a group of life scientists convened at the University of California, Davis, by Ames Research Center.) The centrifuge will be used as a research tool to understand how gravity affects biological processes; to provide an on-orbit one-g control; and to assess the efficacy of using artificial gravity to counteract the deleterious biological effect of space flight. The rationale for the recommendation and examples of using ground-based centrifugation for animal and plant acceleration studies are presented. Included are four appendixes and an extensive bibliography of hypergravity studies.

  13. Centrifuge modelling of drained lateral pile - soil response

    DEFF Research Database (Denmark)

    Klinkvort, Rasmus Tofte

    remaining tests were used to investigate the pile - soil interaction to gain a better in-sight into the complex problem. A monotonic test series was carried out initially and then pile - soil interaction curves were deduced from these tests and compared with methodologies used today. The results indicate...... was proposed to predict the accumulation of displacement and change in secant stiffness using the observations seen in the centrifuge. With the centrifuge test observation as basis, an cyclic pile - soil interaction element was developed. The element can be used in Winkler type analysis where the soil...... of rigid piles. The tests have been performed in homogeneously dense dry or saturated Fontainebleau sand in order to mimic simplified drained offshore soil conditions. Approximately half of the tests have been carried out to investigate the centrifuge procedure in order to create a methodology of...

  14. Solvent-free cleaning using a centrifugal cryogenic pellet accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Haines, J.R.; Fisher, P.W.; Foster, C.A.

    1995-06-01

    An advanced centrifuge that accelerates frozen CO{sub 2} pellets to high speeds for surface cleaning and paint removal is being developed at the Oak Ridge National Laboratory. The centrifuge-based accelerator was designed, fabricated, and tested under a program sponsored by the Warner Robins Air Logistics Center, Robins Air Force Base, Georgia. In comparison to the more conventional compressed air ``sandblast`` pellet accelerators, the centrifugal accelerator system can achieve higher pellet speeds, has precise speed control, and is more than ten times as energy efficient. Furthermore, the use of frozen CO{sub 2} pellets instead of conventional metal, plastic, sand, or other abrasive materials that remain solid at room temperature, minimizes the waste stream. This apparatus has been used to demonstrate cleaning of various surfaces, including removal of paint, oxide coatings, metal coatings, organic coatings, and oil and grease coatings from a variety of surfaces. The design and operation of the apparatus is discussed.

  15. Parametric performance evaluation of a hydraulic centrifugal pump

    Science.gov (United States)

    Heo, M. W.; Y Kim, K.; Ma, S. B.; Yoo, I. S.; Choi, W. C.; Kim, J. H.; Choi, Y. S.

    2014-03-01

    Parametric study of a hydraulic centrifugal pump with backward curved blades has been performed numerically using three-dimensional Reynolds-averaged Navier-Stokes equations. The shear stress transport turbulence model was used for analysis of turbulence. The finite volume method and an unstructured grid system were used for the numerical solution. The optimal grid system in the computational domain was selected through a grid dependency test. Tested parameters were related to the geometry of the impeller and volute: seven variables defining the hub and shroud contours and the blades angle of impeller, and two variables defining the inlet width and expansion angle of volute. The effects of these parameters on the hydrodynamic performance of the centrifugal pump have been investigated. It was found that the centrifugal water pump with the twisted blades has the enhancing efficiency compared to the straight blades pump.

  16. Model tests of geosynthetic reinforced slopes in a geotechnical centrifuge

    International Nuclear Information System (INIS)

    Geosynthetic-reinforced slopes and walls became very popular in recent years because of their financial, technical, and ecological advantages. Centrifuge modelling is a powerful tool for physical modelling of reinforced slopes and offers the advantage to observe the failure mechanisms of the slopes. In order to replicate the gravity induced stresses of a prototype structure in a geometrically 1/N reduced model, it is necessary to test the model in a gravitational field N times larger than that of the prototype structure. In this dissertation, geotextile-reinforced slope models were tested in a geotechnical centrifuge to identify the possible failure mechanisms. Slope models were tested by varying slope inclination, tensile strengths of the geotextiles, and overlapping lengths. Photographs of the geotextile reinforced slope models in flight were taken with a digital camera and the soil deformations of geotextile reinforced slopes were evaluated with Particle Image Velocimetry (PIV). The experimental results showed that failure of the centrifuge models initiated at midheight of the slope, and occurred due to geotextile breakage instead of pullout. The location of the shear surface is independent of the tensile strength of the geotextile; it is dependent on the shear strength of the soil. It is logical to see that the required acceleration of the centrifuge at slope failure was decreased with increasing slope inclination. An important contribution to the stability of the slope models was provided by the overlapping of the geotextile layers. It has a secondary reinforcement effect when it was prolonged and passed through the shear surface. Moreover, the location of the shear surface observed with PIV analysis exactly matches the tears of the retrieved geotextiles measured carefully after the centrifuge testing. It is concluded that PIV is an efficient tool to instrument the slope failures in a geotechnical centrifuge.(author)

  17. Centrifugation Effects on Estrous Cycling, Mating Success and Pregnancy Outcome in Rats

    Science.gov (United States)

    Ronca, April E.; Rushing, Linda S.; Tou, Janet; Wade, Charles E.; Baer, Lisa A.

    2005-01-01

    We analyzed the effects of 2-g centrifugation on estrous cycling, mating success and pregnancy outcome in rats. Sexually mature female and male rats were assigned to either 2-g centrifuge or non-centrifuge conditions, and to non-breeding or breeding conditions. In non-breeding females, estrous cycles were analyzed by examining vaginal cytology before and for 35 days during centrifugation. Breeding females were time-mated following 7 days of adaptation to centrifugation. Following adaptation to centrifugation, estrous cycle duration over a five-cycle period was similar in centrifuged and non-centrifuged females. Identical numbers of centrifuged and non-centrifuged females conceived, however centrifuged females took four-times longer than controls to achieve conception. Births occurred at the normal gestational length. Pup birth weight and postnatal survival were pcentrifuged as compared to non-centrifuged groups. In conclusion, 2-g centrifugation had no effect on estrous cycle length or the probably of becoming pregnant but delayed conception and diminished pregnancy outcome.

  18. Design Method for Channel Diffusers of Centrifugal Compressors

    Directory of Open Access Journals (Sweden)

    Mykola Kalinkevych

    2013-01-01

    Full Text Available The design method for channel diffusers of centrifugal compressors, which is based on the solving of the inverse problem of gas dynamics, is presented in the paper. The concept of the design is to provide high pressure recovery of the diffuser by assuming the preseparation condition of the boundary layer along one of the channel surfaces. The channel diffuser was designed with the use of developed method to replace the vaned diffuser of the centrifugal compressor model stage. The numerical simulation of the diffusers was implemented by means of CFD software. Obtained gas dynamic characteristics of the designed diffuser were compared to the base vaned diffuser of the compressor stage.

  19. Open-cycle centrifugal vapor-compression heat pump

    Science.gov (United States)

    Burgmeier, L. R.; Horner, J. E.

    1987-11-01

    The objectives of the program were: (1) to develop an open cycle, high lift, centrifugal steam compressor system that can be efficiently retrofitted to existing multi-effect and high temperature differential evaporators while maintaining the cost benefits of a single stage centrifugal compressor, and (2) to demonstrate the energy saving cost benefits of driving the compressor with a natural gas fueled gas turbine engine. The turbine exhaust was to be used for final drying of the product that was evaporated. The installation of the system is described along with the test activities through May 1987.

  20. Centrifuge modelling of a laterally cyclic loaded pile

    DEFF Research Database (Denmark)

    Klinkvort, Rasmus Tofte; Leth, Caspar Thrane; Hededal, Ole

    A total number of 9 static and 6 cyclic centrifuge tests on laterally loaded piles in very dense, dry sand was erformed. The prototype dimensions of the piles were 1 meter in diameter and penetration depths varying from 6 to 10 meters. The static tests were used to investigate the initial subgrade...... reaction modulus and as a reference for cyclic tests. For the cyclic tests the accumulation of deflections and the change in secant stiffness of the soil from repetitive loading were investigated. From all the tests carried out accumulations of deflections were seen. rom the centrifuge tests it was seen...

  1. The use of centrifugation to study early Drosophila embryogenesis

    Science.gov (United States)

    Abbott, M. K.; Spooner, B. S. (Principal Investigator)

    1993-01-01

    By the end of 10th nuclear cycle, the somatic nuclei of the Drosophila embryo have migrated to the periphery of the egg. Centrifugation of embryos did not result in the displacement of these nuclei, since cytoskeletal elements anchor them to the cortex. But, mild centrifugal forces displace the centrally located, nascent yolk nuclei. If this increased sensitivity to hypergravity occurs before the beginning of nuclear differentiation during cycle 8, when the nascent yolk and somatic nuclei physically separate, then it would mark the earliest functional difference between these two lineages.

  2. Apparatus and method for centrifugation and robotic manipulation of samples

    Science.gov (United States)

    Vellinger, John C. (Inventor); Ormsby, Rachel A. (Inventor); Kennedy, David J. (Inventor); Thomas, Nathan A. (Inventor); Shulthise, Leo A. (Inventor); Kurk, Michael A. (Inventor); Metz, George W. (Inventor)

    2007-01-01

    A device for centrifugation and robotic manipulation of specimen samples, including incubating eggs, and uses thereof are provided. The device may advantageously be used for the incubation of avian, reptilian or any type of vertebrate eggs. The apparatus comprises a mechanism for holding samples individually, rotating them individually, rotating them on a centrifuge collectively, injecting them individually with a fixative or other chemical reagent, and maintaining them at controlled temperature, relative humidity and atmospheric composition. The device is applicable to experiments involving entities other than eggs, such as invertebrate specimens, plants, microorganisms and molecular systems.

  3. Aspiration spiral-flow type centrifugal flotation machine

    Institute of Scientific and Technical Information of China (English)

    陈文义

    2002-01-01

    Aspiration spiral flow type centrifugal flotation machine takes full advantage of centrifugal force field and gravitational field, and strengthens flotation of coal slurry. As a new-type flotation machine of high efficiency, its key component is bubble generator. Which completes the process of ore pulp inflation and liberalization. The design, parameters and working principle of bubble generator provide the design of the same device in similar equipment with reference. The result of industrial operation shows that this machine is of such features as small occupational area, greater concentration ratio, high processing capacity, high efficiency and lower investment etc.

  4. Blade Crack Detection of Centrifugal Fan Using Adaptive Stochastic Resonance

    OpenAIRE

    Bingbing Hu; Bing Li

    2015-01-01

    Centrifugal fans are widely used in various industries as a kind of turbo machinery. Among the components of the centrifugal fan, the impeller is a key part because it is used to transform kinetic energy into pressure energy. Crack in impeller’s blades is one of the serious hidden dangers. It is important to detect the cracks in the blades as early as possible. Based on blade vibration signals, this research applies an adaptive stochastic resonance (ASR) method to diagnose crack fault in cent...

  5. On the characteristics of centrifugal-reciprocating machines. [cryogenic coolers

    Science.gov (United States)

    Higa, W. H.

    1980-01-01

    A method of compressing helium gas for cryogenic coolers is presented which uses centrifugal force to reduce the forces on the connecting rod and crankshaft in the usual reciprocating compressor. This is achieved by rotating the piston-cylinder assembly at a speed sufficient for the centrifugal force on the piston to overcome the compressional force due to the working fluid. The rotating assembly is dynamically braked in order to recharge the working space with fluid. The intake stroke consists of decelerating the rotating piston-cylinder assembly and the exhaust stroke consists of accelerating the assembly.

  6. The effect of gas fraction on centrifugal pump

    Science.gov (United States)

    Zhu, Z. T.; Wang, Y.; Zhao, L. F.; Ning, C.; Xie, S. F.; Liu, Z. C.

    2015-01-01

    In order to study the multiphase flow field in M125 centrifugal pump, three-dimensional modeling was used for internal flow through three-dimensional software Pro/E. Then based on SST turbulence model combining with Rayleigh-Plesset cavitation model, and structured grid to simulate the hydraulic characteristics of volute and impeller within different gas conditions. The velocity, pressure and gas volume fraction distributions of the interior flow field of volute and impeller were obtained and analyzed, which revealed the effect of gas fractions on the flow characteristic of the centrifugal pump.

  7. Flow in a Low Specific Speed Centrifugal Pump Using PIV

    OpenAIRE

    Cui Dai; Liang Dong

    2013-01-01

    The interflow plays important roles in centrifugal pump design. In order to study the effect of rotation and z-axis on internal flow, two-dimensional particle image velocimetry (PIV) measurements have been performed to measure the steady velocity field on three planes in all impeller passages of a low specific-speed centrifugal pump. The results show that the relative velocity flows in blade passages are obviously different in terms of the positions of the blade relative to the tongue. The in...

  8. Deep eutectic solvents in countercurrent and centrifugal partition chromatography.

    Science.gov (United States)

    Roehrer, Simon; Bezold, Franziska; García, Eva Marra; Minceva, Mirjana

    2016-02-19

    Deep eutectic solvents (DESs) were evaluated as solvents in centrifugal partition chromatography, a liquid-liquid chromatography separation technology. To this end, the partition coefficients of ten natural compounds of different hydrophobicity were determined in non-aqueous biphasic systems containing DES. The influence of the composition of DESs and the presence of water in the biphasic system on the partition coefficient were also examined. In addition, several process relevant physical properties of the biphasic system, such as the density and viscosity of the phases, were measured. A mixture of three to four hydrophobic compounds was successfully separated in a centrifugal partition extractor using a heptane/ethanol/DES biphasic system. PMID:26810802

  9. Effects of centrifugation stress on pituitary-gonadal function in male rats

    Science.gov (United States)

    Gray, G. D.; Smith, E. R.; Damassa, D. A.; Davidson, J. M.

    1980-01-01

    The effects of centrifugation for various lengths of time on circulating levels of luteinizing hormone (LH) and testosterone in male rats were investigated. In a chronic 52-day experiment, centrifugation at 4.1 G significantly reduced LH and testosterone levels for the entire period. Centrifugation at 2.3 G had less effect inasmuch as LH levels were not significantly decreased and testosterone levels were significantly reduced only during the first few days of centrifugation. In more acute experiments, centrifugation at 4.1 G for 4 h resulted in reduced testosterone levels, whereas centrifugation for 15 min did not significantly alter the hormone levels. These results indicate that centrifugation can decrease circulating LH and testosterone levels if the gravitational force is of sufficient magnitude and is maintained for a period of hours. Chronic centrifugation may also inhibit the acute excitatory response of LH to handling and ether stress.

  10. Rapid, low-cost prototyping of centrifugal microfluidic devices for effective implementation of various microfluidic components

    OpenAIRE

    Smith, Suzanne; Land, Kevin; Madou, Marc; Kido, Horacio

    2015-01-01

    A centrifugal microfluidic platform to develop various microfluidic operations – the first of its kind in South Africa – is presented. Rapid and low-cost prototyping of centrifugal microfluidic disc devices, as well as a set-up to test the devices using centrifugal forces, is described. Preliminary results show that various microfluidic operations such as fluidic valving, transportation, and microfluidic droplet generation can be achieved. This work provides a complete centrifugal microfluidi...

  11. Dynamic actuator for Soil-Structure Interaction physical modelling in centrifuge

    OpenAIRE

    CABRERA, Miguel; Caicedo, Bernardo; THOREL, Luc

    2014-01-01

    Dynamic interactions in centrifuge modelling are often induced with external or not controlled sources. This paper presents a method to study Soil-Structure Interaction in centrifuge, with the use of a dynamic actuator developed for centrifuge testing. The dynamic actuator is employed into the model giving the possibility to test the dynamic response of a wind turbine structure, without any additional supporting accessory. The centrifuge soil model was instrumented in order to measure the wav...

  12. Stochastic modeling and optimization of the precipitation centrifugation of powder precipitates

    International Nuclear Information System (INIS)

    A computer mathematical simulator of a submersible rotating machine has been proposed to optimize the precipitation centrifugation process of powder precipitates. The program system on imitation modeling and calculation of the centrifuge has been developed. The developed mathematical simulator of the centrifuge and the program system can be used to optimize the processes and equipment for centrifuging, as well as systems and processes of various fuel cycles

  13. Effect of inner structure of centrifugal separator on particle classification performance

    OpenAIRE

    Yamamoto, Tetsuya; Watanabe, Natsuko; Fukui, Kunihiro; Yoshida, Hideto

    2009-01-01

    This study investigated the effects of the inner structure of a centrifugal separator on particle classification performance. The typical inner structure of centrifugal separators is as follows: a blade, which consists of two orthogonal plates. is inserted into the centrifugal separator to create rigid fluid and particle rotations. The results of the present study demonstrate that centrifugal separator performance was significantly improved by attachment of a cylinder to the center of a conve...

  14. Fast Pyrolysis of Lignin Using a Pyrolysis Centrifuge Reactor

    DEFF Research Database (Denmark)

    Trinh, Ngoc Trung; Jensen, Peter Arendt; Sárossy, Zsuzsa;

    2013-01-01

    Fast pyrolysis of lignin from an ethanol plant was investigated on a lab scale pyrolysis centrifuge reactor (PCR) with respect to pyrolysis temperature, reactor gas residence time, and feed rate. A maximal organic oil yield of 34 wt % dry basis (db) (bio-oil yield of 43 wt % db) is obtained at...

  15. Thermal hydrodynamic analysis of a countercurrent gas centrifuge

    International Nuclear Information System (INIS)

    The influence of the thermal countercurrent on the separative performance of countercurrent centrifuges is treated in this work. The methodology used consists in modeling the gas flow inside the rotor under thermal boundary conditions supplied by the structural thermal model. The gas flow model, also called hydrodynamical model, is based on the Finite Volume Method for cylindrical geometry with azimuthal symmetry. The structural thermal model is based on the Nodal Method and take into account simultaneously, the conduction convection and radiation phenomena. The procedure adopted for this study consisted in the definition of the operational and geometric conditions of a centrifuge which was used as a pattern to the accomplished analysis. This configuration, called 'Standard Centrifuge', was used for the accomplishment of several simulations where the importance of the realistic boundary thermal conditions for the numerical evaluation of the centrifuge separative capacity was evidenced. A selective alteration for the optical properties based on simple engineering procedures was proposed. An improvement of 5% was obtained with this alteration. (author)

  16. Centrifuge modelling of rigid piles in soft clay

    DEFF Research Database (Denmark)

    Klinkvort, R.T.; Poder, M.; Truong, P.;

    2016-01-01

    this study is to employ centrifuge modelling in order to derive experimental p-y curves for rigid piles embedded in over-consolidated soft clay. A kaolin clay sample was prepared and pre-consolidated by applying a constant pressure at the soil surface, while different over-consolidation ratios were...

  17. Centrifugal pumping of gas-liquid mixtures: a mechanistic approach

    Energy Technology Data Exchange (ETDEWEB)

    Estevam, Valdir [PETROBRAS, Rio de Janeiro, RJ (Brazil); Franca, Fernando A. [Universidade Estadual de Campinas, SP (Brazil); Alhanati, Francisco J.S. [C-Fer Technologies, Edmonton, Alberta (Canada)

    2004-07-01

    Centrifugal pumps are known to show a 'surging' behavior at certain conditions of free gas and liquid flow rate at the intake. In the 'surging region' on a pump characteristic curve, the head generated is significantly lower than if the pump were handling a gas-liquid homogeneous mixture. The surging happens, as one shows in this paper, due to the existence of a gas pocket, referred as 'elongated bubble', at the pump impeller inlet region. Therefore, to be able to predict the performance of centrifugal pumps under two-phase conditions, one has to disclose and model the mechanisms that set existence of the elongated bubble at the impeller inlet, besides calculating its length inside the impeller. This paper reports on the results of experimental and mechanistic modelling work conducted with the objective of better predicting the gas-liquid performance of centrifugal pumps under all range of conditions, including those characterized by 'surging'. The focus was on small diameter centrifugal pumps used to produce oil wells. A mechanistic two-fluid model devised to calculate the head generated by the pump was developed. The predictions of the model show good agreement with data collected for this study, and with data recently collected by other research organizations. (author)

  18. Efficient heavy crude oil dehydration with centrifugal separation technology

    Energy Technology Data Exchange (ETDEWEB)

    Perschke, T. [GEA Westfalia Separator Systems GmbH, Oelde (Germany)

    2009-07-01

    Most conventional oil reservoirs are declining and the importance of unconventional heavy crude oil reservoirs is increasing. Unconventional heavy crude oils cannot be handled in the traditional way for dewatering and desalting. The industry mostly employs static dewatering and desalting systems using electrostatic field, chemicals and temperature. These systems have their limitations when it comes to lower API grades. High-speed centrifuges from GEA Westfalia Separator are utilized successfully in the exploration, delivery and treatment of crude oils and oily water applications as they combine efficiency, reliability and environmental conservation in a broad spectrum of highly specialized applications. This paper presented the basic function and fundamental principle behind the separation of particles, or water droplets, in a liquid using Stokes Law. The paper also presented the throughput equation and discussed heavy oil extraction. The solution was then presented. The paper also explained why disk stack centrifuges are used for heavy crude oil dehydration. The process parameters for disc stack centrifuge technology were also reviewed along with future considerations for using disc stack centrifuges for crude oil. It was concluded that the efficiencies of the respective types of equipment are preliminarily determined by the driving g-force in combination with the length of the settling path for the oil droplets. 1 fig.

  19. Toxic waste treatment with sliding centrifugal plasma reactor

    International Nuclear Information System (INIS)

    The aim is to develop technology for hazardous waste treatment, including the building and putting into operation of a prototype based on a sliding centrifugal plasma technology to demonstrate its ability to degradation taking in account the existing environmental standards. (Author)

  20. Centrifugal impeller operating at a very low temperature

    International Nuclear Information System (INIS)

    Several compression stages working at very low temperatures (approximately= 4 K) and low pressures (approximately= 10 mb) have been calculated, assembled and tested. Good thermodynamic efficiencies (approximately= 0,55) and compression ratios (approximately= 3) are obtained. A compression stage is constituted by a centrifugal impeller surrounded by a static diffuser

  1. Pressure Pulsation Signal Analysis for Centrifugal Compressor Blade Crack Determination

    Directory of Open Access Journals (Sweden)

    Hongkun Li

    2014-01-01

    Full Text Available Blade is a key piece of component for centrifugal compressor. But blade crack could usually occur as blade suffers from the effect of centrifugal forces, gas pressure, friction force, and so on. It could lead to blade failure and centrifugal compressor closing down. Therefore, it is important for blade crack early warning. It is difficult to determine blade crack as the information is weak. In this research, a pressure pulsation (PP sensor installed in vicinity to the crack area is used to determine blade crack according to blade vibration transfer process analysis. As it cannot show the blade crack information clearly, signal analysis and empirical mode decomposition (EMD are investigated for feature extraction and early warning. Firstly, signal filter is carried on PP signal around blade passing frequency (BPF based on working process analysis. Then, envelope analysis is carried on to filter the BPF. In the end, EMD is carried on to determine the characteristic frequency (CF for blade crack. Dynamic strain sensor is installed on the blade to determine the crack CF. Simulation and experimental investigation are carried on to verify the effectiveness of this method. The results show that this method can be helpful for blade crack classification for centrifugal compressors.

  2. Effect of chronic centrifugation on body composition in the rat.

    Science.gov (United States)

    Pitts, G. C.; Bull, L. S.; Oyama, J.

    1972-01-01

    Two groups of adult female rats were chronically centrifuged for 60 days (2.76 G, 4.15 G, controls at 1.00 G). Live weights of centrifugal rats decreased about 20 g (6%) per Delta 1 G above control. This weight loss comprised reductions in both body fat and fat-free body weight (FFBW) as determined by body-composition studies on eight rats per group killed at the end of centrifugation. Of nine components constituting the FFBW, only skeletal muscle, liver, and heart changed significantly in weight. Chemical composition showed reductions (compared with controls) in the fat fraction of most components and increases in the water fraction of liver and gut. Identical measurements were made on the remaining eight rats per group killed 43 days after return to 1 G. Neither centrifuged group had reached the control body-weight level at this time. No statistically significant effect of previous G level was found in any of the body-composition parameters. The possible involvment of physiological regulation was considered.

  3. Mass transfer in the mixer of a centrifugal extractor

    International Nuclear Information System (INIS)

    Mass transfer in the mixer of one-step centrifugal extractor ZEN-100K (USSR) designed for spent fuel reprocessing was studied. The mean drop diameter of dispersed phase, stage efficiency according to Hausen and mass transfer coefficients of nitric acid and uranyl nitrate in the system 30% TBP/kerosene-water were determined. 2 refs.; 5 figs

  4. Cyber meets nuclear - Stuxnet and the cyberattacks on Iranian centrifuges

    International Nuclear Information System (INIS)

    In 2010 the computer worm Stuxnet attacked the information hardware of the Iranian uranium enrichment program. Stuxnet spread by USB flash drives and attacked SCADA software installed on Windows systems via several zero-day exploits. SCADA configures programmable logic controllers which control in the case of the Iranian centrifuge cascades frequency converter drives to choose the frequency of centrifuge motors. Thus the attackers were able to either change the rotation frequency of the rotor and thereby the separative power of the centrifuge or even destroy the fast spinning centrifuges by stopping and restarting them. The designers of Stuxnet must have had intimate knowledge of the facility design as e.g. the cascade connection scheme was programmed into Stuxnet. Based on this information some calculations of the Iranian cascade regarding the potential to produce highly enriched uranium will be presented using cascade simulation tools. The use of such highly sophisticated computer attacks to sabotage a nuclear program shed a new light on the debate about cyber attacks and the use of information technology for kinetic attacks in general. The talk will address problems the weaponization of information technology poses for international security and will highlight some more recent developments.

  5. Synthesis and Analytical Centrifugation of Magnetic Model Colloids

    NARCIS (Netherlands)

    Luigjes, B.

    2012-01-01

    This thesis is a study of the preparation and thermodynamic properties of magnetic colloids. First, two types of magnetic model colloids are investigated: composite colloids and single-domain nanoparticles. Thermodynamics of magnetic colloids is studied using analytical centrifugation, including a s

  6. Blade Crack Detection of Centrifugal Fan Using Adaptive Stochastic Resonance

    Directory of Open Access Journals (Sweden)

    Bingbing Hu

    2015-01-01

    Full Text Available Centrifugal fans are widely used in various industries as a kind of turbo machinery. Among the components of the centrifugal fan, the impeller is a key part because it is used to transform kinetic energy into pressure energy. Crack in impeller’s blades is one of the serious hidden dangers. It is important to detect the cracks in the blades as early as possible. Based on blade vibration signals, this research applies an adaptive stochastic resonance (ASR method to diagnose crack fault in centrifugal fan. The ASR method, which can utilize the optimization ability of the grid search method and adaptively realize the optimal stochastic resonance system matching input signals, may weaken the noise and highlight weak characteristic and thus can diagnose the fault accurately. A centrifugal fan test rig is established and experiments with three cases of blades are conducted. In comparison with the ensemble empirical mode decomposition (EEMD analysis and the traditional Fourier transform method, the experiment verified the effectiveness of the current method in blade crack detection.

  7. US and international export controls for the gas centrifuge

    International Nuclear Information System (INIS)

    After an overview of the nuclear fuel cycle and the gas centrifuge enrichment process, the historical aspects of international agreements to limit exports of such equipment are considered and the US implementation legislation to control exports of this ad related equipment are given in some detail

  8. Can centrifugation affect the morphology of polyethylene wear debris ?

    Czech Academy of Sciences Publication Activity Database

    Zolotarevova, E.; Fejfarková, Z.; Entlicher, G.; Lapčíková, Monika; Šlouf, Miroslav; Pokorný, D.; Sosna, A.

    2008-01-01

    Roč. 265, 11-12 (2008), s. 1914-1917. ISSN 0043-1648 R&D Projects: GA MŠk 2B06096 Institutional research plan: CEZ:AV0Z40500505 Keywords : polyethyelene wear particles * total joint replacement * centrifugation Subject RIV: CD - Macromolecular Chemistry Impact factor: 1.509, year: 2008

  9. Numerical Simulation and Cold Modeling experiments on Centrifugal Casting

    Science.gov (United States)

    Keerthiprasad, Kestur Sadashivaiah; Murali, Mysore Seetharam; Mukunda, Pudukottah Gopaliengar; Majumdar, Sekhar

    2011-02-01

    In a centrifugal casting process, the fluid flow eventually determines the quality and characteristics of the final product. It is difficult to study the fluid behavior here because of the opaque nature of melt and mold. In the current investigation, numerical simulations of the flow field and visualization experiments on cold models have been carried out for a centrifugal casting system using horizontal molds and fluids of different viscosities to study the effect of different process variables on the flow pattern. The effects of the thickness of the cylindrical fluid annulus formed inside the mold and the effects of fluid viscosity, diameter, and rotational speed of the mold on the hollow fluid cylinder formation process have been investigated. The numerical simulation results are compared with corresponding data obtained from the cold modeling experiments. The influence of rotational speed in a real-life centrifugal casting system has also been studied using an aluminum-silicon alloy. Cylinders of different thicknesses are cast at different rotational speeds, and the flow patterns observed visually in the actual castings are found to be similar to those recorded in the corresponding cold modeling experiments. Reasonable agreement is observed between the results of numerical simulation and the results of cold modeling experiments with different fluids. The visualization study on the hollow cylinders produced in an actual centrifugal casting process also confirm the conclusions arrived at from the cold modeling experiments and numerical simulation in a qualitative sense.

  10. Centrifugal castings of stainless steel spiked with radioactive tracers

    International Nuclear Information System (INIS)

    The results of making centrifugal castings of stainless steel spiked with radioactive tracers are presented in this report. After casting, the cylinders were machined and analyses made of the tracer content of the machining chips. The structure of the castings was also investigated for porosity and corrosion resistance. The tests have demonstrated that centrifugal castings can be made from a stainless steel supply contaminated with isotopes of cobalt, strontium, cesium, and iridium. With radiation levels of about 0.4 mR/h [which approaches the Defense Waste Processing Facility (DWPF) upper limit], no smearable surface contamination was obtained from the machined cylinders. For 60 to 67 μCi of radioactive isotopes melted with 500 lbs of steel, the contact activity of the ingots was about 0.8 mR/h and the machined cylinders 0.4 mR/h. Most of the original 192Ir and all the 60Co activity was found distributed in the ingots and in the centrifugally cast cylinders. The 60Co was homogeneously distributed and the iridium showed a slight migration due to the centrifugal force field of 120 G's. Porosity and corrosion resistance measurements showed an acceptable structure. 4 refs., 16 figs., 3 tabs

  11. Model Based Fault Detection in a Centrifugal Pump Application

    DEFF Research Database (Denmark)

    Kallesøe, Carsten; Cocquempot, Vincent; Izadi-Zamanabadi, Roozbeh

    2006-01-01

    A model based approach for fault detection in a centrifugal pump, driven by an induction motor, is proposed in this paper. The fault detection algorithm is derived using a combination of structural analysis, observer design and Analytical Redundancy Relation (ARR) design. Structural considerations...... the algorithm is capable of detecting four different faults in the mechanical and hydraulic parts of the pump....

  12. Prediction of performance of centrifugal pumps during starts under pressure

    Science.gov (United States)

    Rostafinski, W.

    1969-01-01

    Method which calculates start-up characteristics of centrifugal pumps reveals a capacity to predict pressure drop characteristics of pumps with vaned diffusers. Calculations are based on pump geometry, design-point flow, speed, and pressure rise, and the pump characteristic within range of approximately ten percent of the design-point flow.

  13. Measurements of the rotordynamic shroud forces for centrifugal pumps

    Science.gov (United States)

    Guinzburg, A.; Brennen, C. E.; Acosta, A. J.; Caughey, T. K.

    1990-01-01

    An experiment was designed to measure the rotordynamic shroud forces on a centrifugal pump impeller. The measurements were done for various whirl/impeller speed ratios and for different flow rates. A destabilizing tangential force was measured for small positive whirl ratios and this force decreased with increasing flow rate.

  14. The optimal parameters of bubble centrifuging in glass melts

    Czech Academy of Sciences Publication Activity Database

    Tonarová, V.; Němec, Lubomír; Kloužek, Jaroslav

    2011-01-01

    Roč. 357, 22-23 (2011), s. 3785-3790. ISSN 0022-3093 R&D Projects: GA MPO 2A-1TP1/063 Institutional research plan: CEZ:AV0Z40320502 Keywords : glass * bubble * centrifuging * modelling Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass Impact factor: 1.537, year: 2011

  15. Enhancement of invasiveness of Yersinia enterocolitica and Escherichia coli in HEp-2 cells by centrifugation.

    OpenAIRE

    Vesikari, T; Bromirska, J; Mäki, M

    1982-01-01

    Centrifugation enhanced the infectivity of invasive Escherichia coli and Yersinia enterocolitica for HEp-2 cells. Noninvasive bacteria were not endocytosed after centrifugation. The centrifugation procedure may increase the sensitivity of testing for bacterial invasiveness in cell culture without causing false-positive results.

  16. Evaluation of a vertical continuous centrifuge for clarification of HTGR dissolver slurries

    International Nuclear Information System (INIS)

    A series of statistically designed centrifuge performance tests was conducted to evaluate the solid-liquid separation efficiency of a vertical continuous centrifuge. Test results show that 100% of the particles greater than 4 microns in diameter were removed from simulated HTGR fuel reprocessing dissolver solutions. Centrifugal force and liquid density are the principal variables affecting separation efficiency

  17. Comparative analysis of discrete exosome fractions obtained by differential centrifugation

    Directory of Open Access Journals (Sweden)

    Dennis K. Jeppesen

    2014-11-01

    Full Text Available Background: Cells release a mixture of extracellular vesicles, amongst these exosomes, that differ in size, density and composition. The standard isolation method for exosomes is centrifugation of fluid samples, typically at 100,000×g or above. Knowledge of the effect of discrete ultracentrifugation speeds on the purification from different cell types, however, is limited. Methods: We examined the effect of applying differential centrifugation g-forces ranging from 33,000×g to 200,000×g on exosome yield and purity, using 2 unrelated human cell lines, embryonic kidney HEK293 cells and bladder carcinoma FL3 cells. The fractions were evaluated by nanoparticle tracking analysis (NTA, total protein quantification and immunoblotting for CD81, TSG101, syntenin, VDAC1 and calreticulin. Results: NTA revealed the lowest background particle count in Dulbecco's Modified Eagle's Medium media devoid of phenol red and cleared by 200,000×g overnight centrifugation. The centrifugation tube fill level impacted the sedimentation efficacy. Comparative analysis by NTA, protein quantification, and detection of exosomal and contamination markers identified differences in vesicle size, concentration and composition of the obtained fractions. In addition, HEK293 and FL3 vesicles displayed marked differences in sedimentation characteristics. Exosomes were pelleted already at 33,000×g, a g-force which also removed most contaminating microsomes. Optimal vesicle-to-protein yield was obtained at 67,000×g for HEK293 cells but 100,000×g for FL3 cells. Relative expression of exosomal markers (TSG101, CD81, syntenin suggested presence of exosome subpopulations with variable sedimentation characteristics. Conclusions: Specific g-force/k factor usage during differential centrifugation greatly influences the purity and yield of exosomes. The vesicle sedimentation profile differed between the 2 cell lines.

  18. An experiment to test centrifugal confinement for fusion

    International Nuclear Information System (INIS)

    The basic idea of centrifugal confinement is to use centrifugal forces from supersonic rotation to augment conventional magnetic confinement. Optimizing this 'knob' results in a fusion device that features four advantages: steady state, no disruptions, superior cross-field confinement, and a simpler coil configuration. The idea rests on two prongs: first, centrifugal forces can confine plasmas to desired regions of shaped magnetic fields; second, the accompanying large velocity shear can stabilize even magnetohydrodynamic (MHD) instabilities. A third feature is that the velocity shear also viscously heats the plasma; no auxiliary heating is necessary to reach fusion temperatures. Regarding transport, the velocity shear can also quell microturbulence, leading to fully classical confinement, as there are no neoclassical effects. Classical parallel electron transport then sets the confinement time. These losses are minimized by a large Pastukhov factor resulting from the deep centrifugal potential well: at Mach 4-5, the Lawson criterion is accessible. One key issue is whether velocity shear will be sufficient by itself to stabilize MHD interchanges. Numerical simulations indicate that laminar equilibria can be obtained at Mach numbers of 4-5 but that the progression toward laminarity with increasing Mach number is accompanied by residual convection from the interchanges. The central goal of the Maryland Centrifugal Torus (MCT) [R. F. Ellis et al., Bull. Am. Phys. Soc. 44, 48 (1998)] is to obtain MHD stability from velocity shear. As an assist to accessing laminarity, MCT will incorporate two unique features: plasma elongation and toroidal magnetic field. The former raises velocity shear efficiency, and modest magnetic shear should suppress residual convection

  19. Pengaruh Kecepatan Putar Pada Proses Pengecoran Aluminium Centrifugal

    Directory of Open Access Journals (Sweden)

    Sugiharto Sugiharto

    2004-01-01

    Full Text Available One of the methods in casting process is centrifugal casting. Generally, it is used to make a product in the form of cylinder or symmetric on spin mold. Thus, it is necessary to discuss further about the influence of rotation velocity variation on the quality of Aluminum casting product that enwrap mechanical characteristic and micro structure. The velocity variations that chosen are 150 rpm, 180 rpm and 200 rpm. This experiment is executed by looking at micro structure that is produced on each rotation variation especially the part of cross section of casting product. Then, it can be done a discussion about micro structure relation towards the hardness number on each rotation variation. In the observation of micro structure, grain structure that is produced by centrifugal casting is generally equiaxed and columnar with the orientation of direction in accordance with the direction of machine velocity. From the result of Vickers hardness test, it can be seen that rotation variation on 200 rpm show higher hardness number rather than another rotation variation. Abstract in Bahasa Indonesia : Salah satu metode dalam proses pengecoran adalah pengecoran centrifugal yang pada umumnya digunakan untuk menghasilkan benda berbentuk silinder atau benda kerja yang simetris pada cetakan yang berputar. Oleh karena itu perlu dikaji lebih lanjut tentang pengaruh variasi kecepatan putar cetakan terhadap kualitas pengecoran alumunium yang meliputi sifat mekanik (kekerasan dan struktur mikro. Variasi kecepatan yang dipilih sebesar 150 rpm, 180 rpm dan 200 rpm. Percobaan dilakukan dengan melihat hasil struktur mikro yang dihasilkan pada setiap variasi putaran terutama bagian penampang melintang produk cor. Selanjutnya dapat dilakukan pembahasan mengenai hubungan struktur mikro terhadap angka kekerasan setiap variasi putaran tersebut. Pada pengamatan struktur mikro, bentuk butir yang dihasilkan pengecoran centrifugal secara umum berbentuk equiaxed dan columnar dengan

  20. Ocular Counter-Rolling During Centrifugation and Static Tilt

    Science.gov (United States)

    Cohen, Bernard; Clement, Gilles; Moore, Steven; Curthoys, Ian; Dai, Mingjia; Koizuka, Izumi; Kubo, Takeshi; Raphan, Theodore

    2003-01-01

    Activation of the gravity sensors in the inner ear-the otoliths-generates reflexes that act to maintain posture and gaze. Ocular counter-rolling (OCR) is an example of such a reflex. When the head is tilted to the side, the eyes rotate around the line of sight in the opposite direction (i.e., counter-rolling). While turning comers, undergoing centrifugation, or making side-to-side tilting head movements, the OCR reflex orients the eyes towards the sum of the accelerations from body movements and gravity. Deconditioning of otolith-mediated reflexes following adaptation to microgravity has been proposed as the basis of many of the postural, locomotor, and gaze control problems experienced by returning astronauts. Evidence suggests that OCR is reduced postflight in about 75% of astronauts tested; but the data are sparse, primarily due to difficulties in recording rotational eye movements. During the Neurolab mission, a short-arm human centrifuge was flown that generated sustained sideways accelerations of 0.5-G and one-G to the head and upper body. This produces OCR; and so for the first time, the responses to sustained centrifugation could be studied without the influence of Earth's gravity on the results. This allowed us to determine the relative importance of sideways and vertical acceleration in the generation of OCR. This also provided the first test of the effects of exposure to artificial gravity in space on postflight otolith-ocular reflexes. There was little difference between the responses to centrifugation in microgravity and on Earth. In both conditions, the induced OCR was roughly proportional to the applied acceleration, with the OCR magnitude during 0.5-G centrifugation approximately 60% of that generated during one-G centrifugation. The overall mean OCR from the four payload crewmembers in response to one-G of sideways acceleration was 5.7 plus or minus 1.1 degree (mean and SD) on Earth. Inflight one-G centrifugation generated 5.7 plus or minus 1

  1. Massively parallel single-molecule manipulation using centrifugal force

    CERN Document Server

    Halvorsen, Ken

    2009-01-01

    Precise manipulation of single molecules has already led to remarkable insights in physics, chemistry, biology and medicine. However, widespread adoption of single-molecule techniques has been impeded by equipment cost and the laborious nature of making measurements one molecule at a time. We have solved these issues with a new approach: massively parallel single-molecule force measurements using centrifugal force. This approach is realized in a novel instrument that we call the Centrifuge Force Microscope (CFM), in which objects in an orbiting sample are subjected to a calibration-free, macroscopically uniform force-field while their micro-to-nanoscopic motions are observed. We demonstrate high-throughput single-molecule force spectroscopy with this technique by performing thousands of rupture experiments in parallel, characterizing force-dependent unbinding kinetics of an antibody-antigen pair in minutes rather than days. Additionally, we verify the force accuracy of the instrument by measuring the well-est...

  2. Reverse-Tangent Injection in a Centrifugal Compressor

    Science.gov (United States)

    Skoch, Gary J.

    2007-01-01

    Injection of working fluid into a centrifugal compressor in the reverse tangent direction has been invented as a way of preventing flow instabilities (stall and surge) or restoring stability when stall or surge has already commenced. The invention applies, in particular, to a centrifugal compressor, the diffuser of which contains vanes that divide the flow into channels oriented partly radially and partly tangentially. In reverse-tangent injection, a stream or jet of the working fluid (the fluid that is compressed) is injected into the vaneless annular region between the blades of the impeller and the vanes of the diffuser. As used here, "reverse" signifies that the injected flow opposes (and thereby reduces) the tangential component of the velocity of the impeller discharge. At the same time, the injected jet acts to increase the radial component of the velocity of the impeller discharge.

  3. Flow generation in a novel centrifugal diffuser test device

    Science.gov (United States)

    Vidos, P.

    1983-09-01

    Recognition of the need to develop optimum diffusers for advanced centrifugal compressors, resulted in the design and manufacture of a novel low-speed test facility for centrifugal diffuser testing. The CDTD was designed to allow the flow angle and wall boundary profiles into the test diffuser to be controlled by variable geometry in the flow generator. The present study reports on the design of the flow generator and the analysis of the internal flow using a NASA computer code (MERIDL). First test results are given and are compared with the results of a control volume analysis. The flow angle control technique was found to work effectively but to give somewhat smaller angles (by 4 deg) than were predicted. It was concluded that the information obtained would allow scaling of the device; however, an analysis code was needed which would accept the real physical boundary conditions.

  4. Dynamical System Analysis of Unsteady Phenomena in Centrifugal Compressor

    Institute of Scientific and Technical Information of China (English)

    YasuyukiKomatsubara; ShimpeiMizuki

    1997-01-01

    Surge and rotating stall occurring in a centrifugal compressor system are investigated by using a phase portrait reconstruction method.From experimentally measured time series of data,the method clarified the cyclic behavior of surge.For rotating stall,there still remain problems in the phase portrait due to the chaotic behavior.However,the results obtained by the present method are able to provide new insights to the modelings for surge and rotating stall.Surge and roatting stall occurring in a centrifugal compressor system are investigated by using a phase portrait reconstruction method.From experimentally measured time series of data,the method clarified the cylcic behavior of surge.For rotating stall,there still remain problems in the phase portrait due to the chaotic behavior.However,the results obtained by the present method are able to provide new insights to the modelings for surge and rotating stall.

  5. Description of the Portsmouth Gas Centrifuge Enrichment Plant

    International Nuclear Information System (INIS)

    The Portsmouth Gas Centrifuge Enrichment Plant (GCEP) will be located at the site of the Portsmouth Gaseous Diffusion Plant in Piketon, Ohio. The purpose of the facility is to provide enriching services for the production of low assay enriched uranium for civilian nuclear power reactors. The construction and operation of the GCEP is administered by the US Department of Energy. The facility will be operated under contract from the US Government. Control of the GCEP rests solely with the US Government, which holds and controls access to the technology. Construction of GCEP is expected to be completed in the mid-1990's. Many facility design and operating procedures are subject to change. Nonetheless, the design described in this report does reflect current thinking. Descriptions of the general facility and major buildings such as the process buildings, feed and withdrawal building, cylinder storage and transfer, recycle/assembly building, and a summary of the centrifuge uranium enriching process are provided in this report

  6. Concept for a short arm human centrifuge onbord ISS.

    Science.gov (United States)

    Kuebler, Ulrich; Grinberg, Anna; Kern, Peter

    Astrium is presently performing for ESA a definition study about the accommodation of a short arm human centrfiuge into a spacecraft. A scientific workshop has been part of the study with the goal to define from various research fields (e.g. cardiovascular, gravitational biology, neuroscience, bone/muscle) requirements for such an artificial gravity system on ISS. As a second step the requirements were consolidated to a set of common specfications for the developemnt of a centrifuge system serving as integrated countermeasure for longterm exposure to g. The presentation will focus on the scientific requirements and the respective translation into technical requirement, finally leading to a centrifuge concept, including accommodation possi-bilities onbord ISS.

  7. The solvent extraction of Am(VI) using centrifugal contactors

    International Nuclear Information System (INIS)

    An engineering-scale centrifugal contactor test bed was built at Idaho National Laboratory to perform solvent extraction testing for the partitioning of hexavalent americium. The raffinate simulant feed was spiked with 243Am and 139Ce and treated with sodium bismuthate to oxidize americium to Am(VI), filtered and contacted with 1 M DAAP/dodecane using centrifugal contactors. Extraction efficiency comparable to batch contacts was obtained, indicating for the first time that Am(VI) can be maintained under process conditions. Contrary to expectations, stripping was not as effective as expected. However, this result may actually be advantageous to process design, since a scrub step, previously thought to be impossible due to rapid Am(VI) reduction, may now be considered for future flowsheet tests. (author)

  8. Core temperature of tailless rats exposed to centrifugation

    Science.gov (United States)

    Monson, C. B.; Oyama, J.

    1984-01-01

    The role of the tail in the altered thermoregulation of rats during acute exposure to hypergravity was investigated, using groups of rats of two ages: 55 days (young) and 138 days (old). Rectal and foot temperature changes were measured in intact and tailless rats subjected to 1 h centrifugation of 2.8 G, with preceding (1 h) and following (1-3 h) 1 G periods. At 22 C, the loss of body heat from the tail per se does not measurably contribute to the hypothermia induced by hypergravity. However, the heat loss from the feet was greater in the tailless rats than in the intact rats from the young group of animals, although there was no significant difference between the tailless and intact rats in the old animal group. It is concluded that the inhibition of heat production is a significant factor in the hypothermia of centrifuged tailless rats, as it has been previously shown to be in the intact animals.

  9. Application study on fast extracting plutonium with annular centrifugal extractor

    International Nuclear Information System (INIS)

    An extraction system with annular centrifugal extractors has been designed to separate plutonium. It worked well when centrifugal speed was ranged from 2000 to 8000 r/min and organic-aqueous flow ratio (o/a) ranged from 1/3 to 1, without obvious entraining phenomenon Pu (IV) in 6 mol/L HNO3 solution was fast extracted and separated, using 0.1 mol/L TOPO/Cyclohexane as extraction solvent and 0.01 mol/L oxalic acid as back extraction solvent. The extraction ratio of two stages was larger than 90%, and the back ratio per stage was more than 96%. The extraction system shows fast operating speed and high extraction ratio, therefore it is suitable for fast extracting Pu. (authors)

  10. Preliminary studies on design and control of centrifugal contactor

    International Nuclear Information System (INIS)

    As a centrifugal contactor is a type of extractor which has high mass-transfer efficiency with short contacting time, it is effective to increase throughput and to protect solvent from radiolytic degradation. An experimental apparatus to study the characteristics of this contactor is made of metacrylate resin. First, from the measured data of interface location between heavy and light phases, the pressure drop at weir is expressed as a function of flow rate and rotation speed. A useful formulation is obtained to calculate the average diameter of droplet and the settling length required in the contactor. Then, transient response of the contactor for step input is measured, and the dynamics of centrifugal contactor is found to be a process of second-order with dead time. A discrete PI control algorithm is proposed for DDC simulation. (author)

  11. Product Evaluation Task Force Phase Two report for centrifuge cake

    International Nuclear Information System (INIS)

    It has been proposed that all Intermediate Level Wastes arising at Sellafield should be encapsulated prior to ultimate disposal. The Product Evaluation Task Force (PETF) was set up to investigate possible encapsulants and to produce and adequate data base to justify the preferred matrices. Three possible types of encapsulants for Centrifuge Cake;- Inorganic cements, Polymer cements, and Polymers, are evaluated using the Kepner Tregoe decision analysis technique. This technique provides a methodology for scoring and ranking alternative options and evaluating any risks associated with an option. The analysis shows that for all four stages of waste management operations ie. Storage Transport, handling and emplacement Disposal, and Process, cement matrices are considerably superior to other potential matrices. A matrix, consisting of nine parts Blast Furnace Slag (BFS) to one part Ordinary Portland Cement (OPC) is recommended as the preferred matrix for Phase 3 studies on Centrifuge Cake. (author)

  12. Experiment of a centrifugal pump during changing speed operation

    International Nuclear Information System (INIS)

    In this paper, a method of changing rotational speed of impeller periodically as the pulsatile working condition is developed to realize pulse outputs both of flow discharge and of head for a centrifugal pump through experiment. The performance of the centrifugal pump under pulsatile working operation condition is measured which indicates this model pump could produce desired pulse flow under such condition. Flow patterns at four testing points under pulsatile conditions are obtained by means of the particle image velocimetry (PIV) technology both with laser induced fluorescence (LIF) particles and refractive index matched (RIM) fluid. Results of PIV measurement show the distributions of velocity, streamlines, and the principal Reynolds normal stress (PRNS). Under the design flow rate condition, the relative velocity in the blade channel distributes smoothly and decreases from inlet to exit. And at the impeller exit, the relative velocity is lower close to suction side than that near pressure side of blade in most of blade channels.

  13. Experiment of a centrifugal pump during changing speed operation

    Science.gov (United States)

    Yuan, H. J.; Shao, J.; Wu, Y. L.; Liu, S. H.

    2012-11-01

    In this paper, a method of changing rotational speed of impeller periodically as the pulsatile working condition is developed to realize pulse outputs both of flow discharge and of head for a centrifugal pump through experiment. The performance of the centrifugal pump under pulsatile working operation condition is measured which indicates this model pump could produce desired pulse flow under such condition. Flow patterns at four testing points under pulsatile conditions are obtained by means of the particle image velocimetry (PIV) technology both with laser induced fluorescence (LIF) particles and refractive index matched (RIM) fluid. Results of PIV measurement show the distributions of velocity, streamlines, and the principal Reynolds normal stress (PRNS). Under the design flow rate condition, the relative velocity in the blade channel distributes smoothly and decreases from inlet to exit. And at the impeller exit, the relative velocity is lower close to suction side than that near pressure side of blade in most of blade channels.

  14. Numerical investigation of suction vortices behavior in centrifugal pump

    Energy Technology Data Exchange (ETDEWEB)

    An, Young Joon; Shin, Byeong Rog [Changwon National University, Changwon (Korea, Republic of)

    2011-03-15

    A numerical simulation on suction vortices behavior in a centrifugal pump was carried out to investigate their influence on the internal flow through impellers including formation and shedding of cavitation by using a finite-volume method and k-{omega} Shear Stress Transport turbulence model. For cavitating flow, a two phase homogeneous cavitation model was used. A full three-dimensional flow in a single section centrifugal pump consisting of a six blade impeller and shroud ring was computed with structured mesh. A constant suction vortex is imposed as a boundary condition. Vortices behavior was investigated according to the variation of flow rates of two pump systems with and without suction vortices. From the results, suction vortices induced biased flow structure and more cavitations, especially at the low flow rate condition. Complicated internal flow phenomena through impellers such as formation of cavitations, growing and shedding of the vortex, flow separation and flow unsteadiness due to the suction vortices are investigated and discussed.

  15. Numerical investigation of suction vortices behavior in centrifugal pump

    International Nuclear Information System (INIS)

    A numerical simulation on suction vortices behavior in a centrifugal pump was carried out to investigate their influence on the internal flow through impellers including formation and shedding of cavitation by using a finite-volume method and k-ω Shear Stress Transport turbulence model. For cavitating flow, a two phase homogeneous cavitation model was used. A full three-dimensional flow in a single section centrifugal pump consisting of a six blade impeller and shroud ring was computed with structured mesh. A constant suction vortex is imposed as a boundary condition. Vortices behavior was investigated according to the variation of flow rates of two pump systems with and without suction vortices. From the results, suction vortices induced biased flow structure and more cavitations, especially at the low flow rate condition. Complicated internal flow phenomena through impellers such as formation of cavitations, growing and shedding of the vortex, flow separation and flow unsteadiness due to the suction vortices are investigated and discussed

  16. Computer-aided design and optimization of centrifugal pumps

    Energy Technology Data Exchange (ETDEWEB)

    Asuaje, M.; Bakir, F.; Kouidri, S.; Noguera, R.; Rey, R.

    2005-03-15

    Improvement in computer power and the development of numerical computational methods over the last few years have allowed the emergence of computational fluid dynamic (CFD) codes, making possible the numerical simulation of flow and energy transfer in turbo machines. To improve the efficiency of these tools, fast design software must be used. Within the framework of the optimization process of centrifugal pumps, HELIOX software was developed. It is a tool for design and performance analysis of centrifugal pumps. HELIOX allows quick design of new pumps and improvement of existing ones. HELIOX's performance analysis has been validated through many industrial cases: approximately 100 machines of different sizes and mechanical power. Heliox can be linked to quasi-and three-dimensional analysis tools; these tools enable a better understanding of physical phenomena so as to control the flow fields inside pumps. (Author)

  17. Waste minimization and resource recovery using centrifugation and thermal desorption

    International Nuclear Information System (INIS)

    Separation and Recovery Systems, Inc. (SRS) provides on-site waste minimization and resource recovery using its state-of-the-art MX-1500 centrifuge and MX-2000 thermal desorber. The MX-1500 can process over 450 feed tons of material per day, resulting in centrifuged cake containing 20% to 60% by weight. The MX-2000 is a hollow-flite thermal processor indirectly heated by either steam or hot oil. SRS has dewatered and/or deoiled over 1,000,000 feed tons of material in the refining, chemical, and energy industries using the MX-1500. SRS estimates that over 300,000 barrels of reusable oil have been recovered from that material. Additionally, SRS has dried and/or detoxified over 150,000 wet tons of solids or soil to regulatory or customer-specified limits using the MX-2000

  18. Optimization of centrifugal pump cavitation performance based on CFD

    Science.gov (United States)

    Xie, S. F.; Wang, Y.; Liu, Z. C.; Zhu, Z. T.; Ning, C.; Zhao, L. F.

    2015-01-01

    In order to further improve the cavitation performance of a centrifugal pump, slots on impeller blade near inlet were studied and six groups of hydraulic model were designed. Base on cavitating flow feature inside a centrifugal pump, bubble growth and implosion are calculated from the Rayleigh-Plesset equation which describes the dynamic behavior of spherical bubble and RNG κ-epsilon model was employed to simulate and analyze the internal two-phase flow of the model pump under the same conditions. The simulation results show that slots on blade near inlet could improve the cavitation performance and cavitation performance improvement of the second group was more obvious. Under the same conditions, the pressure on the back of blade near inlet was higher than the pressure on the back of unmodified blade near inlet, and energy distribution in the flow channel between the two blades was more uniform with a small change of head.

  19. A centrifugal pump concept designed for multiple use in space

    Science.gov (United States)

    Wunderlich, E.; Wulz, H. G.

    A centrifugal pump concept was elaborated for a multiple application in future spacecrafts. Based on this concept a prototype of a small centrifugal pump was manufactured and comprehensively tested. The model pump has been approved in different test series with the fluids liquid ammonia and demineralized water. The design of the model pump was driven by strict requirements of COLUMBUS, namely long life, noiseless operation, minimum mass and low energy consumption. Because of its modular design and as a result of selected materials of multiple compatibility, this pump is suited for the delivery of various further fluids, such as freons, hydrocarbons, propellants (hydrazine) etc.. It is also capable of pumping corrosive or toxic fluids for laboratory processes in space. The wide speed range from about 1,00 to 20,000 rpm which corresponds to a flow from about 1 to 20 l/min, permits an energy saving adaption and flow control.

  20. Fluidic Analysis in an Annular Centrifugal Contactor for Fuel Reprocessing

    International Nuclear Information System (INIS)

    An annular centrifugal contactor (ACC) is a promising device for fuel reprocessing process, because it offers several advantages—a smaller size, a smaller holdup volume, and a higher separation performance—over conventional contactors such as a mixer-settler and a pulse column. Fluid dynamics and dispersion in an ACC, which has a combined mixer/centrifuge structure, are closely related to its separation performance and capacity, and this information is useful in improving equipment design. In this paper, experimental and computational fluid dynamics (CFD) studies were conducted to analyze fluidic and dispersion behavior in ACCs. Multiphase mixing (water/TBP-dodecane/air) in the annular zone was observed by Particle Imaging Velocimetry, and the change in the fluidic and dispersion behavior was ascertained under several operational conditions. The results of the CFD studies, which considered multiphase turbulent flow in the annular and rotor interior zones, were in a good agreement with the experimental data. (author)

  1. Centrifugal effects in a weakly ionized rotating gas

    International Nuclear Information System (INIS)

    The author deals with a weakly ionized gas rotating under the influence of the Lorentz force in a cylindrical vessel. This force occurs if an electrical current flows across a magnetic field. The investigation concerns the possibility to bring a neutral gas into rotation by a relatively small number of charged particles (ions and electrons) on which the Lorentz force is acting. Also the possibility to use the centrifugal force, due to the rotation of the gas, for mass separation, is discussed. (Auth.)

  2. Computational and Experimental Study of an Industrial Centrifugal Compressor Volute

    Institute of Scientific and Technical Information of China (English)

    HarriPitkanen; HannuEsa; 等

    2000-01-01

    A centrifugal compressor with a vaneless diffuser was studied experimentally and numericallly.The main target of the study was to analyze the volute flow.Two different volute geometries was studied.The numerical solution was done by using a steady-state RANS code at both design and off-design conditions.Both calculated and measured pressure and velocity distributions are presented.

  3. Dynamic Actuator for Centrifuge Modeling of Soil-Structure Interaction

    OpenAIRE

    CABRERA, Miguel Angel; Caicedo, Bernardo; THOREL, Luc

    2012-01-01

    This paper presents a new dynamic actuator useful to study soil-structure interactions in a centrifuge. This new dynamic apparatus is based on an amplified piezoelectric actuator. Using this device it is possible to create vibrations in the soil sample of different frequencies and amplitudes. The dynamic actuator consists of a set of weights in a single degree of freedom system plus a piezoelectric actuator and a piezoelectric load cell, which measures the dynamic load. A description of the d...

  4. Centrifuge modeling of soil atmosphere interaction using climatic chamber

    OpenAIRE

    CAICEDO, B; TRISTANCHO, J; THOREL, Luc

    2010-01-01

    Soil-atmospheric interaction processes such as infiltration or evaporation can have a significant effect on the behavior of geotechnical structures located near the soil surface. This paper focuses on the drying process of soils due to evaporation. The scaling laws are analyzed and the results of the application of two cycles of heating and cooling on a soil mass are presented. Based on these results, conclusions about the feasibility of reproducing evaporation on centrifuge models are recomm...

  5. Origins of hydrodynamic forces on centrifugal pump impellers

    OpenAIRE

    Adkins, Douglas R.; Brennen, Christopher E.

    1986-01-01

    Hydrodynamic interactions that occur between a centrifugal pump impeller and volute are experimentally and theoretically investigated. The theoretical analysis considers the inability of the blades to perfectly guide the flow through the impeller, and also includes a quasi-one dimensional treatment of the flow in the volute. The disturbance at the impeller discharge and the resulting forces are determined by the theoretical model. The model is then extended to obtain the hydrodynamic force pe...

  6. Analyses of Hydrodynamic Radial Forces on Centrifugal Pump Impellers

    OpenAIRE

    Adkins, D. R.; Brennen, C. E.

    1988-01-01

    Hydrodynamic interactions that occur between a centrifugal pump impeller and a volute are experimentally and theoretically investigates. The theoretical analysis considers the inability of the blades to perfectly guide the flow through the impeller, and also includes a quasi-one dimensional treatment of flow in the volute. Flow disturbances at the impeller discharge and the resulting forces are determined by the theoretical model. The model is then extended to obtain the hydrodynamic force...

  7. Development and Design of a Centrifugal Compressor Volute

    OpenAIRE

    Cheng Xu; Michael Müller

    2005-01-01

    The volute is one of the key components of a centrifugal compressor. The design of the volute not only impacts the compressor efficiency but also influences the operating range. The detailed flow simulation presented here helps to better understand the volute flow mechanisms and provide design guidance in volute design to meet performance goals. In this study, the viscous Navier-Stokes equations are used to simulate the flow inside the vaneless diffuser and volute. The de...

  8. Dynamical system analysis of unstable flow phenomena in centrifugal blower

    Directory of Open Access Journals (Sweden)

    Garcia David

    2015-09-01

    Full Text Available Methods of dynamical system analysis were employed to analyze unsteady phenomena in a centrifugal blower. Pressure signals gathered at different control points were decomposed into their Principal Components (PCs by means of Singular Spectrum Analysis (SSA. Certain number of PCs was considered in the analysis based on their statistical correlation. Projection of the original signal onto its PCs allowed to draw the phase trajectory that clearly separated non-stable blower working conditions from its regular operation.

  9. Inverse Design of Centrifugal Compressor Stages Using a Meanline Approach

    OpenAIRE

    Yuri Biba; Peter Menegay

    2004-01-01

    This article discusses an approach for determining meanline geometric parameters of centrifugal compressor stages given specified performance requirements. This is commonly known as the inverse design approach. The opposite process, that of calculating performance parameters based on geometry input is usually called analysis, or direct calculation. An algorithm and computer code implementing the inverse approach is described. As an alternative to commercially available inverse design codes...

  10. A Novel Aerodynamic Design Method for Centrifugal Compressor Impeller

    OpenAIRE

    Mahdi Nili-Ahmadabadi; mohammad durali; Ali Hajilouy Benisi

    2014-01-01

    This paper describes a new quasi-3D design method for centrifugal compressor impeller. The method links up a novel inverse design algorithm, called Ball-Spine Algorithm (BSA), and a quasi-3D analysis. Euler equation is solved on the impeller meridional plane. The unknown boundaries (hub and shroud) of numerical domain are iteratively modified by BSA until a target pressure distribution in flow passage is reached. To validate the quasi-3D analysis code, existing compressor impeller is investig...

  11. Comparison of Two Diffusers in a Transonic Centrifugal Compressor

    OpenAIRE

    Koji Nakagawa; Hiroshi Hayami; Yuichi Keimi

    2003-01-01

    Flow mechanisms suppressing the flow separation in two diffusers, a low-solidity cascade diffuser and a vaned diffuser with additional small vanes near the inlet, were compared mainly by numerical simulation. As the superiority of the low-solidity cascade diffuser was expected, a series of experiments was conducted using a transonic centrifugal compressor with a maximum pressure ratio of 7. The performance of the compressor with the vaned diffuser was comparable to that of the low-solidity ca...

  12. Optimal Design of a Centrifugal Compressor Impeller Using Evolutionary Algorithms

    OpenAIRE

    Soo-Yong Cho; Kook-Young Ahn; Young-Duk Lee; Young-Cheol Kim

    2012-01-01

    An optimization study was conducted on a centrifugal compressor. Eight design variables were chosen from the control points for the Bezier curves which widely influenced the geometric variation; four design variables were selected to optimize the flow passage between the hub and the shroud, and other four design variables were used to improve the performance of the impeller blade. As an optimization algorithm, an artificial neural network (ANN) was adopted. Initially, the design of experiment...

  13. Centrifugal compressor flow instabilities at lowmass flow rate

    OpenAIRE

    Sundström, Elias

    2016-01-01

    Turbochargers play an important role in increasing the energetic efficiency andreducing emissions of modern power-train systems based on downsized recipro-cating internal combustion engines (ICE). The centrifugal compressor in tur-bochargers is limited at off-design operating conditions by the inception of flowinstabilities causing rotating stall and surge. They occur at reduced enginespeeds (low mass flow rates), i.e. typical operating conditions for a betterengine fuel economy, harming ICEs...

  14. Measurement and Calibration of Centrifugal Compressor Pressure Scanning Instrumentation

    OpenAIRE

    Rivas, Jose R; Lou, Fangyuan; Harrison, Herbert "Trey"; Key, Nicole

    2015-01-01

    The compressor is a key component of a jet engine necessary to compress air for the combustion process. Research to optimize compressor efficiency through the understanding of air flow behavior has led to increased efforts in creating modern compressor test facilities. In collaboration with Honeywell, the High Speed Compressor facility at Zucrow Laboratories has built a centrifugal compressor test cell with instrumentation to measure the temperatures and pressures of the air flow. This facili...

  15. Body Weight Gain during Altered Gravity: Spaceflight, Centrifugation and Transitions

    Science.gov (United States)

    Wade, Charles E.; Harper, J. S.; Daunton, N. G.; Corcoran, M. L.; Morey-Holton, E.; Hargens, Alan R. (Technical Monitor)

    1995-01-01

    Gravity is a force that influences all living systems, and is often disregarded in the study of environment on growth and development. To assess the effect of gravity exposure on growth, immature rats (130-200 g) were evaluated during chronic altered gravity exposure and during transition between gravity fields. The effects of 14 days of spaceflight on body weight gain were evaluated (n=12) and compared to controls. Spaceflight did not affect weight gain. In 6 rats, the transition from spaceflight to 1 G showed a significant (p less than 0.05) post flight weight loss over 48 hr of 13 g compared to controls. Over subsequent days this loss was compensated for with no difference noted after 5 days. Exposure to hypergravity, 2 G for 16 days, was evaluated in groups of n=6 (Control; On Center Control (OCC); Centrifuged). With centrifugation or OCC there was a reduction in body weight within 24 hr. The OCC regained control weights within 13 days. The weight difference, 26 +/- 1 g, persisted with 2 G with no subsequent difference in weight gain over days 3-16 compared to controls; 3.7 +/- 0.1 versus 3.9 +/- 0.1 g/day respectively. Transition from centrifugation to 1 G resulted in a weight increase within 48 hours. Over 16 days the rate of gain was increased 3.1 +/- 0.1 g/day for centrifuge compared to 2.1 +/- 0.1 g/day for controls between Day 3 to 16. However, differences from control were still noted on Day 16. Transition from one gravity field to another causes acute changes in body weight. Transition to microgravity or 1 G, following the acute changes, results in adjustments to attain a normal weight. In hypergravity the acute reduction in body weight persist, but weight gain is normal. Transitioning from hypergravity to 1G results in an increased weight gain to compensate for the persistent reduction during exposure.

  16. Effects of Different Blade Angle Distributions on Centrifugal Compressor Performance

    OpenAIRE

    Pekka Röyttä; Aki Grönman; Ahti Jaatinen; Teemu Turunen-Saaresti; Jari Backman

    2009-01-01

    A centrifugal compressor with three different shrouded 2D impellers is studied numerically. All impellers have the same dimensions, and they only differ in channel length and geometry. Noticeable differences in efficiency are observed. Two different turbulence models, Chien's k-ε and k-ω SST, are compared. For this case, k-ω SST was found more realistic. The hypothesis that pressure losses in a curved duct and in an impeller passage behave similarly is suggested and found inadequate.

  17. Centrifugal stretching of 170Hf in the interacting boson model

    Directory of Open Access Journals (Sweden)

    Werner V.

    2014-03-01

    Full Text Available We present the results of a recent experiment to deduce lifetimes of members of the ground state rotational band of 170Hf, which show the effect of centrifugal stretching in this deformed isotope. Results are compared to the geometrical confined beta-soft(CBS rotor model, as well as to the interacting boson model (IBM. Two methods to correct for effects due to the finite valence space within the IBM are proposed.

  18. Impeller Design of a Centrifugal Fan with Blade Optimization

    OpenAIRE

    Yu-Tai Lee; Vineet Ahuja; Ashvin Hosangadi; Michael E. Slipper; Lawrence P. Mulvihill; Roger Birkbeck; Coleman, Roderick M.

    2011-01-01

    A method is presented for redesigning a centrifugal impeller and its inlet duct. The double-discharge volute casing is a structural constraint and is maintained for its shape. The redesign effort was geared towards meeting the design volute exit pressure while reducing the power required to operate the fan. Given the high performance of the baseline impeller, the redesign adopted a high-fidelity CFD-based computational approach capable of accounting for all aerodynamic losses. The present eff...

  19. Numerical simulation of the countercurrent flow in a gas centrifuge

    Energy Technology Data Exchange (ETDEWEB)

    Cloutman, L.D.; Gentry, R.A.

    1983-03-01

    We present a finite difference method for the numerical simulation of the axisymmetric countercurrent flow in a gas centrifuge. A time-marching technique is used to relax an arbitrary initial condition to the desired steady-state solution. All boundary layers can be resolved, and nonlinear effects may be included. Numerical examples are presented. We conclude that this technique is capable of predicting accurately the performance of a wide variety of machines under all operating conditions of interest.

  20. Pengaruh Kecepatan Putar Pada Proses Pengecoran Aluminium Centrifugal

    OpenAIRE

    Sugiharto Sugiharto; Soejono Tjitro

    2004-01-01

    One of the methods in casting process is centrifugal casting. Generally, it is used to make a product in the form of cylinder or symmetric on spin mold. Thus, it is necessary to discuss further about the influence of rotation velocity variation on the quality of Aluminum casting product that enwrap mechanical characteristic and micro structure. The velocity variations that chosen are 150 rpm, 180 rpm and 200 rpm. This experiment is executed by looking at micro structure that is produced on ea...

  1. Fault Diagnosis in a Centrifugal Pump Using Active Magnetic Bearings

    OpenAIRE

    Nordmann Rainer; Aenis Martin

    2004-01-01

    The number of rotors running in active magnetic bearings (AMBs) has increased over the last few years. These systems offer a great variety of advantages compared to conventional systems. The aim of this article is to use the AMBs together with a developed built-in software for identification, fault detection, and diagnosis in a centrifugal pump. A single-stage pump representing the turbomachines is investigated. During full operation of the pump, the AMBs are used as actuators to generate def...

  2. A Review of Centrifugal Testing of Gasoline Contamination and Remediation

    OpenAIRE

    Jay N. Meegoda; Liming Hu

    2011-01-01

    Leaking underground storage tanks (USTs) containing gasoline represent a significant public health hazard. Virtually undetectable to the UST owner, gasoline leaks can contaminate groundwater supplies. In order to develop remediation plans one must know the extent of gasoline contamination. Centrifugal simulations showed that in silty and sandy soils gasoline moved due to the physical process of advection and was retained as a pool of free products above the water table. However, in clayey soi...

  3. Purification of crime scene DNA extracts using centrifugal filter devices

    OpenAIRE

    Norén, Lina; Hedell, Ronny; Ansell, Ricky; Hedman, Johannes

    2013-01-01

    BACKGROUND: The success of forensic DNA analysis is limited by the size, quality and purity of biological evidence found at crime scenes. Sample impurities can inhibit PCR, resulting in partial or negative DNA profiles. Various DNA purification methods are applied to remove impurities, for example, employing centrifugal filter devices. However, irrespective of method, DNA purification leads to DNA loss. Here we evaluate the filter devices Amicon Ultra 30 K and Microsep 30 K with respect to re...

  4. Phase characterization in two centrifugally cast HK stainless steel tubes

    International Nuclear Information System (INIS)

    The petrochemical industry has been using 25% Cr - 20% Ni centrifugally cast stainless steel since the early 1960s in reformer and pyrolysis furnaces. This class of material has replaced the traditional superalloys showing similar creep behavior, with substantial reduction in costs. The use of the centrifugal casting technique for tube production has also contributed to better quality in these components. During the past two decades, several studies have been conducted concerning the improvement in the performance of this material at high temperatures. Some of them were related to failure analysis and life prediction, while others were related to the chemical composition balance and to new alloying procedures. As a consequence, a new generation of centrifugally cast steels has been developed in the form of niobium-modified HK and HP steels. The creep resistance of these alloys appears to be dependent on the composition, morphology, and distribution of carbides that form within them. The purpose of the study reported herein is to characterize the precipitation effects occurring during long- term service in two HK-type steels, one being of basic HK composition and the other a niobium-modified alloy

  5. Modelling of horizontal centrifugal casting of work roll

    Science.gov (United States)

    Xu, Zhian; Song, Nannan; Tol, Rob Val; Luan, Yikun; Li, Dianzhong

    2012-07-01

    A numerical model to simulate horizontal centrifugal roll castings is presented in this paper. In order to simulate the flow fluid and solidification of horizontal centrifugal roll casting correctly, the model uses a body fitted mesh technique to represent the geometry. This new method maps a plate layer mesh to a circular mesh. The smooth body fitted mesh method gives more accurate calculation results for cylindrical geometries. A velocity depending on the angular velocity and inner radius of the mould is set up as a velocity boundary condition. The fluid flow coupled with heat transfer and solidification in a rapidly rotating roll is simulated. A gravity free falling method is applied as a pouring condition. A moveable pouring system is also used in the simulations. High speed steel is used to produce the work roll. Two different gating positions and a moveable gating system are simulated in this paper. Results show that the position of pouring system has a significant influence on the temperature distribution. The temperature distribution at a fixed central pouring system is more favourable than the distribution from a side pouring system. A moving gating system method is a better way to obtain a uniform temperature field in centrifugal casting and offers an alternative for existing techniques.

  6. Governing Principles of Alginate Microparticle Synthesis with Centrifugal Forces.

    Science.gov (United States)

    Eral, Huseyin Burak; Safai, Eric R; Keshavarz, Bavand; Kim, Jae Jung; Lee, Jisoek; Doyle, P S

    2016-07-19

    A controlled synthesis of polymeric particles is becoming increasingly important because of emerging applications ranging from medical diagnostics to self-assembly. Centrifugal synthesis of hydrogel microparticles is a promising method, combining rapid particle synthesis and the ease of manufacturing with readily available laboratory equipment. This method utilizes centrifugal forces to extrude an aqueous polymer solution, sodium alginate (NaALG) through a nozzle. The extruded solution forms droplets that quickly cross-link upon contact with aqueous calcium chloride (CaCl2) solution to form hydrogel particles. The size distribution of hydrogel particles is dictated by the pinch-off behavior of the extruded solution through a balance of inertial, viscous, and surface tension stresses. We identify the parameters dictating the particle size and provide a numerical correlation predicting the average particle size. Furthermore, we create a phase map identifying different pinch-off regimes (dripping without satellites, dripping with satellites, and jetting), explaining the corresponding particle size distributions, and present scaling arguments predicting the transition between regimes. By shedding light on the underlying physics, this study enables the rational design and operation of particle synthesis by centrifugal forces. PMID:27311392

  7. Flow measurements in a centrifugal diffusor test device

    Science.gov (United States)

    Vitting, T.

    1985-06-01

    This work sought to verify concepts used in the design of a large scale, low speed, radial cascade wind tunnel which was to be used to investigate flow phenomena in and the performance of vaned radial diffusors. A major contributor to centrifugal compressor efficiency is the performance of the vaned diffusor which closely follows the impeller of the compressor. The purpose of this diffusor is to efficiently convert most of the kinetic energy of the transonic flow entering the vane into pressure. The need for an experimental facility which could simulate adequately, at low cost and in a controlled way, the environment of the centrifugal compressor motivated the development of the Centrifugal Diffusor Test Device (CDTD). It was expected that the generation of a three dimensional flow would provide improved empirical data on annular cascade performance. This measurement program surveyed the axial and circumferential uniformity of the flow at the inlet of a transonic wedge-type blading mounted in the device. Evaluation of the results showed the flow uniformity to be unsatisfactory. Leakage and other small perturbations in the flow field in the swirl generator are believed to be amplified by the basic flow configuration of the device.

  8. Centrifugal vacuum casting for fuel cladding tube blanks

    International Nuclear Information System (INIS)

    An advanced technique for making tube blanks with an acceptable level of nonmetallic inclusions is vacuum induction melting combined with centrifugal casting, as the latter gives a cylindrical casting having an axial hole, while the cast metal has elevated density and contains fewer nonmetallic inclusions than does the metal cast in a stationary mold. The reduction in the nonmetallic inclusions occurs because of increased rates of floating up in the rotating mold on account of the centrifugal force and the rejection to the inner surface. One can choose the parameters such as the pouring speed, rotational speed, mold cooling, and liquid-metal temperature and can introduce a deoxidizer to remove the nonmetallic inclusions or reduce the grain size of them and produce an appropriate cast structure and obtain a metal whose quality is the same as that on vacuum induction melting with secondary arc remelting. For these purposes, the authors have developed centrifugal-casting machines for use under vacuum or in inert gases with horizontal and vertical mold rotation axes

  9. Modelling of horizontal centrifugal casting of work roll

    International Nuclear Information System (INIS)

    A numerical model to simulate horizontal centrifugal roll castings is presented in this paper. In order to simulate the flow fluid and solidification of horizontal centrifugal roll casting correctly, the model uses a body fitted mesh technique to represent the geometry. This new method maps a plate layer mesh to a circular mesh. The smooth body fitted mesh method gives more accurate calculation results for cylindrical geometries. A velocity depending on the angular velocity and inner radius of the mould is set up as a velocity boundary condition. The fluid flow coupled with heat transfer and solidification in a rapidly rotating roll is simulated. A gravity free falling method is applied as a pouring condition. A moveable pouring system is also used in the simulations. High speed steel is used to produce the work roll. Two different gating positions and a moveable gating system are simulated in this paper. Results show that the position of pouring system has a significant influence on the temperature distribution. The temperature distribution at a fixed central pouring system is more favourable than the distribution from a side pouring system. A moving gating system method is a better way to obtain a uniform temperature field in centrifugal casting and offers an alternative for existing techniques.

  10. A new practice in fruit trees: Centrifugal training system

    Directory of Open Access Journals (Sweden)

    Ersin ATAY

    2013-06-01

    Full Text Available The choice of the training system is a rather important decision for yield, fruit quality and profitability. There were dramatic changes in concepts for apple training in the last years. Centrifugal training system which was one of the innovations was developed in the beginning of the 2000’s in France. SolAxe training system forms the main part of this training system. The most innovative aspect of the Centrifugal training system is the artificial extinction technique. This technique is carried out more specifically in the center of the tree and on the underside of branches to remove potentially poor quality fruits. Artificial extinction improves light distribution within the tree canopy especially in colored-fruit varieties for which the light climate is particularly important. It also offers an alternative training method to reduce biennial bearing. In addition to canopy porosity created by artificial extinction, this training system can help reducing disease and harmful insects. In this study it is aimed to explain general rules of centrifugal training system.

  11. Optimization of Power Consumption for Centrifugation Process Based on Attenuation Measurements

    International Nuclear Information System (INIS)

    The main objective of this research is to produce a mathematical model that allows decreasing the electrical power consumption of centrifugation process based on attenuation measurements. The centrifugation time for desired separation efficiency may be measured to determine the power consumed of laboratory centrifuge device. The power consumption is one of several parameters that affect the system reliability and productivity. Attenuation measurements of wave propagated through blood sample during centrifugation process were used indirectly to measure the power consumption of device. A mathematical model for power consumption was derived and used to modify the speed profile of centrifuge controller. The power consumption model derived based on attenuation measurements has successfully save the power consumption of centrifugation process keeping high separation efficiency. 18kW.h monthly for 100 daily time device operation had been saved using the proposed model.

  12. Enriched surface acidity for surfactant-free suspensions of carboxylated carbon nanotubes purified by centrifugation

    Directory of Open Access Journals (Sweden)

    Elizabeth I. Braun

    2016-06-01

    Full Text Available It is well known that surfactant-suspended carbon nanotube (CNT samples can be purified by centrifugation to decrease agglomerates and increase individually-dispersed CNTs. However, centrifugation is not always part of protocols to prepare CNT samples used in biomedical applications. Herein, using carboxylated multi-walled CNTs (cMWCNTs suspended in water without a surfactant, we developed a Boehm titrimetric method for the analysis of centrifuged cMWCNT suspensions and used it to show that the surface acidity of oxidized carbon materials in aqueous cMWCNT suspensions was enriched by ∼40% by a single low-speed centrifugation step. This significant difference in surface acidity between un-centrifuged and centrifuged cMWCNT suspensions has not been previously appreciated and is important because the degree of surface acidity is known to affect the interactions of cMWCNTs with biological systems.

  13. Bioreactor-free tissue engineering: directed tissue assembly by centrifugal casting.

    Science.gov (United States)

    Mironov, Vladimir; Kasyanov, Vladimir; Markwald, Roger R; Prestwich, Glenn D

    2008-02-01

    Casting is a process by which a material is introduced into a mold while it is liquid, allowed to solidify in a predefined shape inside the mold, and then removed to give a fabricated object, part or casing. Centrifugal casting could be defined as a process of molding using centrifugal forces. Although the centrifugal casting technology has a long history in metal manufacturing and in the plastics industry, only recently has this technology attracted the attention of tissue engineers. Initially, centrifugation was used to optimize cell seeding on a solid scaffold. More recently, centrifugal casting has been used to create tubular scaffolds and both tubular and flat multilayered, living tissue constructs. These newer applications were enabled by a new class of biocompatible in situ crosslinkable hydrogels that mimic the extracellular matrix. Herein the authors summarize the state of the art of centrifugal casting technology in tissue engineering, they outline associated technological challenges, and they discuss the potential future for clinical applications. PMID:18194071

  14. Influence of blade angle distribution along leading edge on cavitation performance of a centrifugal pump

    Science.gov (United States)

    Xu, Y.; Tan, L.; Cao, S. L.; Wang, Y. C.; Meng, G.; Qu, W. S.

    2015-01-01

    The influence of blade angle distribution along leading edge on cavitation performance of centrifugal pumps is analysed in the present paper. Three sets of blade angle distribution along leading edge for three blade inlet angles are chosen to design nine centrifugal pump impellers. The RNG k-epsilon turbulence model and the Zwart-Gerber-Belamri cavitation model are employed to simulate the cavitation flows in centrifugal pumps with different impellers and the same volute. The numerical results are compared with the experimental data, and the comparison proves that the numerical simulation can accurately predict the cavitation performance of centrifugal pumps. On the basis of the numerical simulations, the pump head variations with pump inlet pressure, and the flow details in centrifugal pump are revealed to demonstrate the influence of blade angle distribution along leading edge on cavitation performances of centrifugal pumps.

  15. Quantification of platelets obtained by different centrifugation protocols in SHR rats

    Directory of Open Access Journals (Sweden)

    João Alberto Yazigi Junior

    2015-12-01

    Full Text Available ABSTRACT OBJECTIVE: To quantify the platelet concentration in the blood of SHR rats, by means of different centrifugation protocols, and to evaluate what the most effective method for obtaining platelets is. METHODS: We used 40 male rats of the isogenic SHR lineage. The animals were divided into three groups: control, using whole blood without centrifugation; single centrifugation, using whole blood subjected to a single centrifugation at 200 × gand 400 × g; and double centrifugation, using whole blood subjected one centrifugation at different rotations, followed by collection of whole plasma subjected to another centrifugation at different rotations: 200 × g+ 200 ×g; 200 × g+ 400 × g; 200 × g+ 800 × g; 400 ×g+ 400 × g; 400 × g+ 800 × g. Samples of 3 ml of blood were drawn from each animal by means of cardiac puncture. The blood was stored in Vacutainer collection tubes containing 3.2% sodium citrate. The blood from the control group animals was analyzed without being subjected to centrifugation. After the blood from the other groups of animals had been subjected to centrifugation, the whole plasma was collected and subjected to platelet counting in the lower third of the sample. RESULTS: We obtained greatest platelet enrichment in the subgroup with two centrifugations comprising 400 × gfor 10 min + 400 ×gfor 10 min, in which the mean platelet concentration was 11.30 times higher than that of the control group. CONCLUSION: It was possible to obtain a high platelet concentration using viable simple techniques, by means of centrifugation of whole blood and use of commonly used materials. The most effective method for obtaining platelet concentrate was found in samples subjected to two centrifugations.

  16. Computer precision simulation for titanium casting centrifugal mold filling of prescision titanium castings

    OpenAIRE

    Xu, Daming; LI, XIN; Geving AN

    2004-01-01

    Computer simulation codes were developed based on proposed mathematical model for centrifugal mold filling processes and previous computer software for 3D mold filling and solidification of castings. Sample simulations were implemented for mold filling processes of precision titanium castings under gravity and different centrifugal casting techniques. The computation results show that the alloy melt has a much stronger mold filling ability for thin section castings unde a centrifugal force fi...

  17. Topological analysis of the formation of Jet-Wake flow pattern in centrifugal impeller channel

    Institute of Scientific and Technical Information of China (English)

    ZHENG Qun; LIU Shun-long

    2004-01-01

    Topological analyses are carried out for the numerical results of internal flow field in centrifugal impeller. Topological rules of the singular point characteristics of the limiting streamline are derived and used to determine three dimensional separation patterns in centrifugal impeller and to verify the numerical results. The results reveal that the wake is saddle to nodal closed separation and the formation, its onset point and its developing process of Jet-Wake Flow pattern in centrifugal impeller are presented in this paper.

  18. The Dynamics of Stall and Surge Behavior in Axial-Centrifugal Compressors

    OpenAIRE

    Cousins, William T.

    1997-01-01

    The phenomena of stall and surge in axial-centrifugal compressors is investigated through high-response measurements of both the pressure field and the flowfield throughout the surge cycle. A unique high-response forward-facing and aft-facing probe provides flow information. Several axial-centrifugal compressors are examined, both in compressor rigs and engines. Extensive discussion is presented on the differences in axial and centrifugal rotors and their effect on the system response char...

  19. Increasing the Stable Operating Range of a Fixed-Geometry Variable-Speed Centrifugal Compressor

    OpenAIRE

    Brasz, Joost J.

    2014-01-01

    Centrifugal compressors used on water-cooled chillers require stable operation over a wide range of flows at greatly varying pressure ratios. These operational requirements are dictated by variations in cooling demand and ambient conditions. Variable-speed centrifugal compressors are known to maintain their peak efficiency at the varying operating conditions much better than fixed-speed compressors. Replacing a fixed-speed centrifugal compressor with a variable speed one can reduce the annual...

  20. A New Optimization Method for Centrifugal Compressors Based on 1D Calculations and Analyses

    OpenAIRE

    Pei-Yuan Li; Chu-Wei Gu; Yin Song

    2015-01-01

    This paper presents an optimization design method for centrifugal compressors based on one-dimensional calculations and analyses. It consists of two parts: (1) centrifugal compressor geometry optimization based on one-dimensional calculations and (2) matching optimization of the vaned diffuser with an impeller based on the required throat area. A low pressure stage centrifugal compressor in a MW level gas turbine is optimized by this method. One-dimensional calculation results show that D3/D...

  1. Main characteristic parameters of centrifugal pump and safe operation of reactor

    International Nuclear Information System (INIS)

    Based on main characteristic parameters of centrifugal pump, the problems are discussed during the reactor operation. To High-Flux Engineering Test Reactor, ten-type typical faults are generalized in the reactor operation. Making use of basic knowledge of centrifugal pump, it can help reactor operators to find out whether centrifugal pump is out of order and to handle it. So, the safety of reactor can be assured

  2. Differentiating Central Centrifugal Cicatricial Alopecia and Androgenetic Alopecia in African American Men: Report of Three Cases

    OpenAIRE

    Davis, Erica C.; Reid, Sophia D.; Callender, Valerie D.; Sperling, Leonard C.

    2012-01-01

    Central centrifugal cicatricial alopecia is a scarring alopecia that is predominantly seen in African American women, but occurs less frequently in men. The authors present three cases of African American men with biopsy-proven central centrifugal cicatricial alopecia and detail the clinical presentation, histological findings, and treatment regimens. Central centrifugal cicatricial alopecia should be considered in the differential diagnosis when evaluating male patients with vertex hair loss...

  3. Effect of Mould Wall Thickness on Rate of Solidification of Centrifugal Casting

    OpenAIRE

    Madhusudhan; Narendranaath S; S, Mohankumar G C; Mukunda P G

    2010-01-01

    In Centrifugal Casting process the centrifugal force presses the metal against the inner wall of the metal mould, resulting in rapid solidification of the molten metal. However the solidification structures like structural uniformity and structural character of the solidified metal of centrifugal casting is of great importance, regarding to its mechanical properties. The solidification time of the casting is dependent upon the various parameters like speed ofrotation of the mold, mould wall t...

  4. A REVIEW PAPER ON DEVELOPMENT OF IMPELLER OF CENTRIFUGAL PUMP USING COMPUTATIONAL FLUID DYNAMICS

    OpenAIRE

    Mr. Nilesh Nemgonda Patil

    2015-01-01

    Nowadays, the centrifugal pumps became very popular because of recent development of high speed electric motors, steam turbines etc.Centrifugal pumps can be single-stage or may be multistage pumps. It depends upon the number of impellers used in the pump. Single stage pump consists of only one impeller while in multistage pumps the impellers are mounted in the series in pumps. These Centrifugal pumps can be analyzed by software code like Computational Fluid Dynamics (CFD).This CFD...

  5. WATER RETENTION VALUE MEASUREMENTS OF CELLULOSIC MATERIALS USING A CENTRIFUGE TECHNIQUE

    OpenAIRE

    Jinxin Wang; Qingzheng Cheng; Joseph McNeel; Peter Jacobson

    2010-01-01

    A centrifugal method has been modified and applied to the assessment of water retention value (WRV) in cellulosic materials. Microcrystalline cellulose (MCC), small particles/fibrils isolated from MCC using high-pressure homogenizer, and pulp fibers saturated in water were centrifuged at different speeds and times with filter paper and/or a membrane acting as the filter in the WRV measurement setup. As centrifugal speed, time, and filter pore-size increased, lower WRVs were obtained. Smaller ...

  6. Medical incidences during centrifuge training and F-16 flying in the Netherlands

    OpenAIRE

    Holewijn, M.

    1996-01-01

    A survey in the NAMC database containing the records of centrifuge runs of candidate and experienced pilots revealed that in 15.1% of the centrifuge training sessions, a run was stopped. The major reasons were motion sickness (31%), fatigue (28%), and arrhythmias (22%). During centrifuge training at the NAMC the prevalence of an episode of supra ventricular ectopies was 33%. In 21% of the runs a ventricular ectopie occurred. In-flight ECG monitoring revealed that arrhythmias occurred in 62% o...

  7. Adiabatic Field-Free Alignment of Asymmetric Top Molecules with an Optical Centrifuge

    Science.gov (United States)

    Korobenko, A.; Milner, V.

    2016-05-01

    We use an optical centrifuge to align asymmetric top SO2 molecules by adiabatically spinning their most polarizable O-O axis. The effective centrifugal potential in the rotating frame confines the sulfur atoms to the plane of the laser-induced rotation, leading to the planar molecular alignment that persists after the molecules are released from the centrifuge. The periodic appearance of the full three-dimensional alignment, typically observed only with linear and symmetric top molecules, is also detected. Together with strong in-plane centrifugal forces, which bend the molecules by up to 10 deg, permanent field-free alignment offers new ways of controlling molecules with laser light.

  8. Adiabatic field-free alignment of asymmetric top molecules with an optical centrifuge

    CERN Document Server

    Korobenko, A

    2015-01-01

    We use an optical centrifuge to align asymmetric top $\\mathrm{SO_2}$ molecules by adiabatically spinning their most polarizable O-O axis. The effective centrifugal potential in the rotating frame confines sulfur atoms to the plane of the laser-induced rotation, leading to the planar molecular alignment which persists after the molecules are released from the centrifuge. Periodic appearance of the full three-dimensional alignment, typically observed only with linear and symmetric top molecules, is also detected. Together with strong in-plane centrifugal forces, which bend the molecules by up to 10 degrees, permanent field-free alignment offers new ways of controlling molecules with laser light.

  9. High Order Centrifugal Distortion Corrections to Energy Levels of Asymmetric Top Molecules

    Institute of Scientific and Technical Information of China (English)

    LIU Yu-Yan; LIU Xiao-Yong; LIU Hong-Ping; GUO Yuan-Qing; HUANG Guang-Ming; LIN Jie-Li; GAO Hui

    2000-01-01

    High order centrifugal distortion terms have been derived and added to the effective Hamiltonian of asymmetric top molecules. Based on this Hamiltonian, a program in Fortran 77 has been developed for spectral analysis of asymmetric top molecules. The high order centrifugal distortion terms are found to be non-negligible even for the low-lying rotational transitions of molecules, such as Ha 18O, subjected to severe centrifugal distortion effect,and for the high-lying rotational transitions of molecules, such as 14N16O2 subjected to the moderate centrifugal distortion effect.

  10. Computer precision simulation for titanium casting centrifugal mold filling of prescision titanium castings

    Directory of Open Access Journals (Sweden)

    Daming XU

    2004-08-01

    Full Text Available Computer simulation codes were developed based on proposed mathematical model for centrifugal mold filling processes and previous computer software for 3D mold filling and solidification of castings. Sample simulations were implemented for mold filling processes of precision titanium castings under gravity and different centrifugal casting techniques. The computation results show that the alloy melt has a much stronger mold filling ability for thin section castings unde a centrifugal force field than that only under the gravity. A "return back" mold filling manner is showed to be a reasonable technique for centrifugal casting processes, especially for thin section prcision castings.

  11. Confusion around the tidal force and the centrifugal force

    OpenAIRE

    Matsuda, Takuya; Isaka, Hiromu; Boffin, Henri M. J.

    2015-01-01

    We discuss the tidal force, whose notion is sometimes misunderstood in the public domain literature. We discuss the tidal force exerted by a secondary point mass on an extended primary body such as the Earth. The tidal force arises because the gravitational force exerted on the extended body by the secondary mass is not uniform across the primary. In the derivation of the tidal force, the non-uniformity of the gravity is essential, and inertial forces such as the centrifugal force are not nee...

  12. Physical modelling of earthquakes in the LCPC centrifuge

    OpenAIRE

    CHAZELAS, JL; Derkx, F.; THOREL, L; Escoffier, S.; Rault, G; BUTTIGIEG, S; COTTINEAU, LM; J. Garnier

    2006-01-01

    This paper presents a set of three new equipments that will enable next the Laboratoire Central des Ponts et Chaussées (LCPC - Nantes - France) to carry out reduced scale physical modeling in the centrifuge for earthquake engineering researches and testing. An earthquake simulator (EQS), designed by ACTIDYN Systems, will enable to apply as well sinus inputs in a wide band of frequencies as real or synthesis earthquakes at the bottom of soil models. This EQS is mono axial and its originality s...

  13. Materialoptimering för diskar i en centrifug

    OpenAIRE

    Johansson, Emma; Klingmark, Erika; Larsson, Johan

    2015-01-01

    Under detta kandidatexamensarbete i lättkonstruktioner har en studie i huruvida det är möjligt att reducera vikten hos en centrifug genomförts. Centriair AB var projektets uppdragsgivare och Jack Delin var industrihandledare under hela processen. Centrifugen som viktreducerades används inom friteringsbranschen och innehåller 200-250 tunna diskar som roterar 3000 varv per minut. Diskarnas uppgift är att separera oljepartiklar från vattendroppar genom att slunga dessa mot de inre väggarna i cen...

  14. Effects of Different Blade Angle Distributions on Centrifugal Compressor Performance

    Directory of Open Access Journals (Sweden)

    Jari Backman

    2009-01-01

    Full Text Available A centrifugal compressor with three different shrouded 2D impellers is studied numerically. All impellers have the same dimensions, and they only differ in channel length and geometry. Noticeable differences in efficiency are observed. Two different turbulence models, Chien's k-ε and k-ω SST, are compared. For this case, k-ω SST was found more realistic. The hypothesis that pressure losses in a curved duct and in an impeller passage behave similarly is suggested and found inadequate.

  15. Concentration and purification of poliovirus by ultrafiltration and isopycnic centrifugation.

    Science.gov (United States)

    Guskey, L E; Wolff, D A

    1972-07-01

    A method is described by which poliovirus can be rapidly and simply concentrated by the use of a Diaflo XM-50 ultrafilter membrane. Freon-extracted ultrafilter concentrates banded in CsCl provided a 1,724-fold volumetric concentration of poliovirus. During concentration, trypsin-digested cellular material can pass through the ultrafilter membrane, thus providing a versatile means of degrading and eliminating extraneous contaminating proteins. The ultrafilter concentration system is compared with the CsCl cushion system of poliovirus concentration, and both systems are further compared by banding virus and virus capsid material in CsCl by use of isopycnic centrifugation. PMID:4341520

  16. Cell structure and percent viability by a slide centrifuge technique.

    OpenAIRE

    Fitzgerald, M G; Hosking, C S

    1982-01-01

    It was found that a slide centrifuge (Cytospin) preparation of a cell suspension allowed a reliable assessment of not only cell structure but also the percentage of non-viable cells. The non-viable cells appeared as "smear" cells and paralleled in number the cells taking up trypan blue. Direct experiment showed the unstained viable cells in a trypan blue cell suspension remained intact in a Cytospin preparation while the cells taking up trypan blue were the "smear" cells. The non-viability of...

  17. Capture into resonance and phase space dynamics in optical centrifuge

    CERN Document Server

    Armon, Tsafrir

    2016-01-01

    The process of capture of a molecular enesemble into rotational resonance in the optical centrifuge is investigated. The adiabaticity and phase space incompressibility are used to find the resonant capture probability in terms of two dimensionless parameters P1,P2 characterising the driving strength and the nonlinearity, and related to three characteristic time scales in the problem. The analysis is based on the transformation to action-angle variables and the single resonance approximation, yielding reduction of the three-dimensional rotation problem to one degree of freedom. The analytic results for capture probability are in a good agreement with simulations. The existing experiments satisfy the validity conditions of the theory.

  18. Effect of centrifugal pump impeller shapes on cavitation erosion

    International Nuclear Information System (INIS)

    The cavitation erosion test and suction performance test for five types of centrifugal pump impellers with different blade inlet angles and different position of blade inlet edges are carried out by using the open-type pump test loop and painting method. The relationship among the shape of impellers, flow rate, pump running time and position, degree of cavitation erosion inside impellers are made clear under the state of 3% pump head dropping. The experimental results are discussed with the internal flow pattern and inlet reverse flow occurred in the pump

  19. Performance Improvement of a Centrifugal Compressor by Passive Means

    OpenAIRE

    N. Sitaram; Swamy, S. M.

    2012-01-01

    The present experimental investigation deals with performance improvement of a low-speed centrifugal compressor by inexpensive passive means such as turbulence generator placed at different positions and partial shroud near the rotor blade tip. The experiments are carried out at three values of tip clearance, namely 2.2%, 5.1%, and 7.9% of rotor blade height at the exit. Performance tests are carried out for a total of 13 configurations. From these measurements, partial shroud is found to giv...

  20. OFF-DESIGN OPERATION OF IMPELLER OF THE CENTRIFUGAL COMPRESSOR

    Directory of Open Access Journals (Sweden)

    Saim KOÇAK

    2004-02-01

    Full Text Available Inducer and discharge dimensions of impellers of centrifugal compressor are determined as a preliminary design. Blockage factor and inducer dimensionless mass flow are exercised in relation with the relative Mach number. The equation which will be based o off-design calculation, related with the discharge relative Mach number are iterated until it will equal to inducer dimensionless mass flow rate. Then discharge relative Mach number for off-design works is obtained. The results calculated in accordance with pressure, temperature and density are seen to be similar with the theoretical parameters.

  1. Oxygen consumption measurements during continual centrifugation of mice.

    Science.gov (United States)

    Fethke, W.; Cook, K. M.; Porter, S. M.; Wunder, C. C.

    1973-01-01

    A simple method is described for measurement of metabolism of conscious, unrestrained animals, during chronic centrifugation or other conditions of isolation (23.75 hr/day) from the investigators in an essentially normal atmospheric environment for as long as seven days. This involves telemetry of pressure changes in a metabolic chamber. At 7 G's, increased O2 intake lasting two to seven days and a decreased excursion of the day-night difference were measured for male white mice with less effect or even an opposite effect at lower fields. Base-line measurements of metabolic rate per mouse are less affected by animal size than expected from the surface area law.

  2. Aneutronic fusion on the base of asymmetrical centrifugal trap

    Science.gov (United States)

    Volosov, V. I.

    2006-08-01

    A physical design of a device that can be a base for a direct-conversion nuclear electric power station is considered. The project considers the aneutronic reaction P-11B in the asymmetric centrifugal trap. Kinetic energy of nuclear particles (alpha particles) is converted into electrical energy inside this device; no thermal cycle is used. Heating and recuperation of energy of protons and boron ions take place in the plasma space. The presented scheme differs significantly from the conventional thermonuclear fusion. 'Fast' protons, which are the main energy component of plasma, have an almost monoenergetic spectrum. This makes it possible to realize the 'resonance' fusion.

  3. Gender Differences in Cardiovascular Tolerance to Short Arm Centrifugation

    Science.gov (United States)

    Fong, Kevin J.; Arya, Maneesh; Paloski, William H.

    2007-01-01

    In preparation for the NASA Artificial Gravity (AG) pilot study, the tolerability of the proposed AG parameters was tested in 11 ambulatory human subjects (6m, 5w) by exposing each to a short arm centrifuge trial. Subjects were oriented in the supine position (but inclined 6deg head down) on one arm of the centrifuge, and the rotation rate (30.6-33.4 rpm) and radial position of the feet were set to produce 2.5G of equivalent gravitational load at the force plate directly beneath the feet, 1G at the level of the mediastinum, and approximately 0.55G at the labyrinth. Amongst the 6 men participating in this preliminary study, 5 completed at least 60 minutes of the trial successfully with no adverse sequelae. However, amongst the female cohort the test was stopped by the medical monitor before 60 min in all but one case, with pre-syncope listed as the reason for termination in all cases. Mean time before abort of the centrifuge run amongst the women was 33.2 +/- 20.97 min. It is known that women have a greater predisposition to syncope during orthostatic stress, under normal tilt table conditions, during LBNP, and following space flight. The reasons for this difference are the subject of some debate, but anthropometric factors, the vasoactive effects of sex hormones, gender differences in susceptibility to motion sickness, catecholamine levels, ability to augment total peripheral resistance in response to orthostatic stress, and structural differences in cardiac anatomy and physiology have all been suggested. This finding led to the exclusion of women from the AG pilot study. Clearly if AG is to be employed as a multi-system countermeasure it must provide physiological protection at rotation rates within the tolerance limits of all potential astronauts. Further investigation of the responses of women to centrifugation will be necessary to determine how to adjust AG parameters for tolerance by female subjects before a more detailed investigation of the appropriate dose

  4. Over all separation factors for stable isotopes by gas centrifuge

    International Nuclear Information System (INIS)

    The separation factor for the elements with molar wight differences, γ0, is an important characteristic parameter for separation of varied isotopes. Besides the dependence on construction parameters of the gas centrifuge it depends on many variables. Some of them are operation conditions, such as feeding flow rate F, pressure at wall pw, temperature T0 and distribution temperature on the wall and others. Separation factor γ0 depends on physical properties, such as molar weight M, viscosity μ, product of ρD, where ρ is density of working media and D is its diffusion coefficient. It was taken four examples: UF6, WF6, OsO4 and Xe

  5. Performance Test of a R134a Centrifugal Water Chiller

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyeonkoo; Yoon, Pil Hyun; Kim, Choon Dong; Lee, Yong Duck; Jeong, Jinhee [LG Cable Ltd., Anyang (Korea)

    2001-05-01

    A centrifugal water chiller using alternative refrigerant R134a have been developed. The prototype was designed to have refrigeration capacity of 300 RT. Its compressor employs a single high-speed impeller, airfoil diffuser and collector. Newly developed enhanced tubes were installed in the evaporator and the condenser to reduce the required head for the compressor. Off-design characteristics at various conditions, performance test of the compressor and analysis of the refrigeration cycle were performed. So the probability of use in part load condition was checked and the direction for revision was suggested. 5 refs., 11 figs., 2 tabs.

  6. Gas centrifuge power supplies (inverters): Key components and subassemblies

    International Nuclear Information System (INIS)

    This document was prepared to serve as a guide for export control officials in their interpretation, understanding, and implementation of exports laws that relate to the international trigger list entry for gas centrifuge power supplies (also known as frequency changers, convertors, or inverters) and parts, components, and subassemblies of such power supplies. Particular emphasis is placed on descriptions of the key parts, components, and subassemblies of such power supplies, which were previously unspecified, so as to clarify the intent of the international trigger list entry

  7. Analyses of hydrodynamic radial forces on centrifugal pump impellers

    Science.gov (United States)

    Adkins, D. R.; Brennen, C. E.

    1988-01-01

    An experimental and theoretical study of the hydrodynamic interactions occurring between a centrifugal pump impeller and a volute is presented. The theoretical analysis provides a quasi-one-dimensional treatment of the flow in the volute, and it is extended to include the hydrodynamic force perturbations caused by the impeller whirling eccentrically in the volute. It is noted that these perturbations are often destabilizing. The theoretical models were found to accurately predict the radial forces caused by the flow through the impeller. The pressure acting on the front shroud of the impeller is shown to have a significant effect on the destabilizing hydrodyamic forces.

  8. Abnormal Tilt Perception During Centrifugation in Patients with Vestibular Migraine.

    Science.gov (United States)

    Wang, Joanne; Lewis, Richard F

    2016-06-01

    Vestibular migraine (VM), defined as vestibular symptoms caused by migraine mechanisms, is very common but poorly understood. Because dizziness is often provoked in VM patients when the semicircular canals and otolith organs are stimulated concurrently (e.g., tilting the head relative to gravity), we measured tilt perception and eye movements in patients with VM and in migraine and normal control subjects during fixed-radius centrifugation, a paradigm that simultaneously modulates afferent signals from the semicircular canals and otoliths organs. Twenty-four patients (8 in each category) were tested with a motion paradigm that generated an inter-aural centrifugal force of 0.36 G, resulting in a 20° tilt of the gravito-inertial force in the roll plane. We found that percepts of roll tilt developed slower in VM patients than in the two control groups, but that eye movement responses, including the shift in the eye's rotational axis, were equivalent in all three groups. These results demonstrate a change in vestibular perception in VM that is unaccompanied by changes in vestibular-mediated eye movements and suggest that either the brain's integration of canal and otolith signals or the dynamics of otolith responses are aberrant in patients with VM. PMID:26956976

  9. Vacuum-arc plasma centrifuge applied to stable isotope separation

    International Nuclear Information System (INIS)

    This work describes the results of a vacuum-arc plasma centrifuge experiment. A plasma centrifuge is an apparatus where a plasma column is produced due to the interaction of an electric current with an externally applied magnetic field, sup(→)J x sup(→)B. Among the applications of a rotating plasma, this work deals particularly with its utilization in an isotope enrichment device. The main characteristics of the plasma produced in this experiment are presented, with special attention to the plasma column rotation and the isotope enrichment. The analysis of the results is performed using a fluid model for a completely ionized rigid body rotating plasma column in steady state equilibrium. The main results are: a) rotation frequency of the plasma column in the range 2 x 10 sup(4) to 3 x 10 sup(5) rad/s; b) enrichment of 10 to 30% for the magnesium isotopes, and of 290 to 490% for the carbon 13 isotope; c) rigid body rotation of the plasma column only for radii smaller than the characteristic radius of the plasma column. re; d) linear dependence of the rotation frequency upon the magnetic field strength only for r < re; e) existence of an optimum value of the magnetic field for maximum enrichment; and f) dependence of the rotation frequency upon the inverse of the atomic mass. (author)

  10. Design Attributes and Scale Up Testing of Annular Centrifugal Contactors

    Energy Technology Data Exchange (ETDEWEB)

    David H. Meikrantz; Jack D. Law

    2005-04-01

    Annular centrifugal contactors are being used for rapid yet efficient liquid- liquid processing in numerous industrial and government applications. Commercialization of this technology began eleven years ago and now units with throughputs ranging from 0.25 to 700 liters per minute are readily available. Separation, washing, and extraction processes all benefit from the use of this relatively new commercial tool. Processing advantages of this technology include: low in-process volume per stage, rapid mixing and separation in a single unit, connection-in-series for multi-stage use, and a wide operating range of input flow rates and phase ratios without adjustment. Recent design enhancements have been added to simplify maintenance, improve inspection ability, and provide increased reliability. Cartridge-style bearing and mechanical rotary seal assemblies that can include liquid-leak sensors are employed to enhance remote operations, minimize maintenance downtime, prevent equipment damage, and extend service life. Clean-in-place capability eliminates the need for disassembly, facilitates the use of contactors for feed clarification, and can be automated for continuous operation. In nuclear fuel cycle studies, aqueous based separations are being developed that efficiently partition uranium, actinides, and fission products via liquid-liquid solvent extraction. Thus, annular centrifugal contactors are destined to play a significant role in the design of such new processes. Laboratory scale studies using mini-contactors have demonstrated feasibility for many such separation processes but validation at an engineering scale is needed to support actual process design.

  11. Experiments on Plasma Injection into a Centrifugally Confined System

    Science.gov (United States)

    Messer, S.; Bomgardner, R.; Brockington, S.; Case, A.; Witherspoon, F. D.; Uzun-Kaymak, I.; Elton, R.; Young, W.; Teodorescu, C.; Morales, C. H.; Ellis, R. F.

    2009-11-01

    We describe the cross-field injection of plasma into a centrifugally-confined system. Two different types of plasma railgun have been installed on the Maryland Centrifugal Experiment (MCX) in an attempt to drive that plasma's rotation. The initial gun was a coaxial device designed to mitigate the blowby instability. The second one was a MiniRailgun with a rectangular bore oriented so that the MCX magnetic field augments the railgun's internal magnetic field. Tests at HyperV indicate this MiniRailgun reaches much higher densities than the original gun, although muzzle velocity is slightly reduced. We discuss the impact of these guns on MCX for various conditions. Initial results show that even for a 2 kG field, firing the MiniRailgun modifies oscillations of the MCX diamagnetic loops and can impact the core current and voltage. The gun also has a noticeable impact on MCX microwave emissions. These observations suggest plasma enters the MCX system. We also compare diagnostic data collected separately from MCX for these and other guns, focussing primarily on magnetic measurements.

  12. Centrifuge modeling of buried continuous pipelines subjected to normal faulting

    Science.gov (United States)

    Moradi, Majid; Rojhani, Mahdi; Galandarzadeh, Abbas; Takada, Shiro

    2013-03-01

    Seismic ground faulting is the greatest hazard for continuous buried pipelines. Over the years, researchers have attempted to understand pipeline behavior mostly via numerical modeling such as the finite element method. The lack of well-documented field case histories of pipeline failure from seismic ground faulting and the cost and complicated facilities needed for full-scale experimental simulation mean that a centrifuge-based method to determine the behavior of pipelines subjected to faulting is best to verify numerical approaches. This paper presents results from three centrifuge tests designed to investigate continuous buried steel pipeline behavior subjected to normal faulting. The experimental setup and procedure are described and the recorded axial and bending strains induced in a pipeline are presented and compared to those obtained via analytical methods. The influence of factors such as faulting offset, burial depth and pipe diameter on the axial and bending strains of pipes and on ground soil failure and pipeline deformation patterns are also investigated. Finally, the tensile rupture of a pipeline due to normal faulting is investigated.

  13. Impeller inlet geometry effect on performance improvement for centrifugal pumps

    International Nuclear Information System (INIS)

    This research treats the effect of impeller inlet geometry on performance improvement for a boiler feed pump, who is a centrifugal pump having specific speed of 183 m.m3min-1.min-1 and close type impeller with exit diameter of 450 mm. The hydraulic performance and cavitation performance of the pump have been tested experimentally. In order to improve the pump, five impellers have been considered by extending the blade leading edge or applying much larger blade angle at impeller inlet compared with the original impeller. The 3-D turbulent flow inside those pumps has been analyzed basing on RNG k-ε turbulence model and VOF cavitation model. It is noted that the numerical results are fairly good compared with the experiments. Based on the experimental test and numerical simulation, the following conclusions can be drawn: (1) Impeller inlet geometry has important influence on performance improvement in the case of centrifugal pump. Favorite effects on performance improvement have been achieved by both extending the blade leading edge and applying much larger blade angle at impeller inlet: (2) It is suspected that the extended leading edge have favorite effect for improving hydraulic performance, and the much larger blade angle at impeller inlet have favorite effect for improving cavitation performance for the test pump: (3) Uniform flow upstream of impeller inlet is helpful for improving cavitation performance of the pump

  14. Effect of attack angle on flow characteristic of centrifugal fan

    Science.gov (United States)

    Wu, Y.; Dou, H. S.; Wei, Y. K.; Chen, X. P.; Chen, Y. N.; Cao, W. B.

    2016-05-01

    In this paper, numerical simulation is performed for the performance and internal flow of a centrifugal fan with different operating conditions using steady three-dimensional incompressible Navier-Stokes equations coupled with the RNG k-e turbulent model. The performance curves, the contours of static pressure, total pressure, radial velocity, relative streamlines and turbulence intensity at different attack angles are obtained. The distributions of static pressure and velocity on suction surface and pressure surface in the same impeller channel are compared for various attack angles. The research shows that the efficiency of the centrifugal fan is the highest when the attack angle is 8 degree. The main reason is that the vortex flow in the impeller is reduced, and the jet-wake pattern is weakened at the impeller outlet. The pressure difference between pressure side and suction side is smooth and the amplitude of the total pressure fluctuation is low along the circumferential direction. These phenomena may cause the loss reduced for the attack angle of about 8 degree.

  15. Exit flow measurements of a centrifugal pump impeller

    International Nuclear Information System (INIS)

    Discharge flows from a centrifugal pump impeller with a specific speed of 150 [rpm, m3/min, m] were experimentally investigated. A large axisymmetric collector instead of a volute casing was installed to obtain circumferentially uniform flow, i.e. without interaction of the impeller and the volute. The unsteady flow was measured at the impeller exit and vaneless diffuser using a hot film probe and a pressure transducer. The flow at impeller exit showed pronounced jet-wake flow patterns. The wake, which was on the suction/hub side at high flow rate, became enlarged pitchwisely on both the hub and the shroud side as the flow rate decreases. The pitchwise non-uniformity of the flow rapidly decreased along the downstream and the non-uniformity almost disappeared at radius ratio of 1.18 for medium flow rate. The mean vaneless diffuser flow was reasonably predicted using a one dimensional analysis when an empirical constant was used to specify the skin friction coefficient. The data can be used for a centrifugal pump impeller design and validation of CFD codes and flow modeling

  16. Numerical Study of Unsteady Flow in Centrifugal Cold Compressor

    Science.gov (United States)

    Zhang, Ning; Zhang, Peng; Wu, Jihao; Li, Qing

    In helium refrigeration system, high-speed centrifugal cold compressor is utilized to pumped gaseous helium from saturated liquid helium tank at low temperature and low pressure for producing superfluid helium or sub-cooled helium. Stall and surge are common unsteady flow phenomena in centrifugal cold compressors which severely limit operation range and impact efficiency reliability. In order to obtain the installed range of cold compressor, unsteady flow in the case of low mass flow or high pressure ratio is investigated by the CFD. From the results of the numerical analysis, it can be deduced that the pressure ratio increases with the decrease in reduced mass flow. With the decrease of the reduced mass flow, backflow and vortex are intensified near the shroud of impeller. The unsteady flow will not only increase the flow loss, but also damage the compressor. It provided a numerical foundation of analyzing the effect of unsteady flow field and reducing the flow loss, and it is helpful for the further study and able to instruct the designing.

  17. Design and Characterization of a Centrifugal Compressor Surge Test Rig

    Directory of Open Access Journals (Sweden)

    Kin Tien Lim

    2011-01-01

    Full Text Available A detailed description of a new centrifugal compressor surge test rig is presented. The objective of the design and development of the rig is to study the surge phenomenon in centrifugal compression systems and to investigate a novel method of surge control by active magnetic bearing servo actuation of the impeller axial tip clearance. In this paper, we focus on the design, initial setup, and testing of the rig. The latter two include the commissioning of the rig and the experimental characterization of the compressor performance. The behavior of the compressor during surge is analyzed by driving the experimental setup into surge. Two fundamental frequencies, 21 Hz and 7 Hz, connected to the surge oscillation in the test rig are identified, and the observed instability is categorized according to the intensity of pressure fluctuations. Based on the test results, the excited pressure waves are clearly the result of surge and not stall. Also, they exhibit the characteristics of mild and classic surge instead of deep surge. Finally, the change in the compressor performance due to variation in the impeller tip clearance is experimentally examined, and the results support the potential of the tip clearance modulation for the control of compressor surge. This is the first such demonstration of the feasibility of surge control of a compressor using active magnetic bearings.

  18. Study on hydraulic performance of φ10 mm centrifugal extractor

    International Nuclear Information System (INIS)

    For applying φ10 mm centrifugal extractor to study on the back-extraction section of plutonium purification cycle in Purex process, the characteristics such as the entrainment state of the two-phase exit liquid, the volume of the liquid in both the annular space and the rotor were studied when the rotor speed was changed, with the two- phase flow ratio (A : O) 1 : 4 and the heavy phase weir diameter 6.4 mm, 6.6 mm and 6.8 mm, respectively. The results show that the centrifugal extractor has a stable operational state when the total flow is less than 9.0 mL/min and the rotor speed is greater than 4000 r/min. There is no entrainment in the liquid two-phase exit. The liquid volumes in the annular space and the rotor are about 0.7 mL and 2.2 mL, respectively. The contact time of two-phase can be calculated by relating the total flow. (authors)

  19. Fabrication of BSCCO Tube by Centrifugal Melting Process

    International Nuclear Information System (INIS)

    Bi-22l2 tubes for fault current limiter (FCL) were fabricated by centrifugal melting process. SrSO4 (10 wt. %) was added to Bi-2212 powder to lower the melting point of Bi-22l2 and to improve the mechanical properties. The BSCCO powder was completely melted at 1300 degree C using the RF furnace and then poured into rotating steel mold. The steel mold, preheated at 450 degree C - 550 degree C for 2 hour was rotated at 1020 - 2520 RPM. The solidified BSCCO tube was cooled down to room temperature in the furnace for 48 hours and separated from the mold between Bi-2212 and the mold. ZrO2 solution was used to separate it easily from the mold and Ag tape was attached in the mold inner wall of the mold to analysis electrical property. Bi-22l2 tube was often cracked when the cooling rate was high. BSCCO tubes with 70 φ x 100 mm, 50 φ x 100 mm and 30 φ x 150 mm size were fabricated by centrifugal melting process. The Jc3 of tubes with 50 φ x 100 mm x 4.0 t and 50 φ x 100 mm x 4.0 t were 178 and 74.2 A/cm2 at 77K, respectively. The processing condition for Bi-2212 tube fabrication was investigated using XRD and SEM analyses.

  20. Artificial gravity: head movements during short-radius centrifugation

    Science.gov (United States)

    Young, L. R.; Hecht, H.; Lyne, L. E.; Sienko, K. H.; Cheung, C. C.; Kavelaars, J.

    2001-01-01

    Short-radius centrifugation is a potential countermeasure to long-term weightlessness. Unfortunately, head movements in a rotating environment induce serious discomfort, non-compensatory vestibulo-ocular reflexes, and subjective illusions of body tilt. In two experiments we investigated the effects of pitch and yaw head movements in participants placed supine on a rotating bed with their head at the center of rotation, feet at the rim. The vast majority of participants experienced motion sickness, inappropriate vertical nystagmus and illusory tilt and roll as predicted by a semicircular canal model. However, a small but significant number of the 28 participants experienced tilt in the predicted plane but in the opposite direction. Heart rate was elevated following one-second duration head turns. Significant adaptation occurred following a series of head turns in the light. Vertical nystagmus, motion sickness and illusory tilt all decreased with adaptation. Consequences for artificial gravity produced by short-radius centrifuges as a countermeasure are discussed. Grant numbers: NCC 9-58. c 2001. Elsevier Science Ltd. All rights reserved.

  1. LISSAT Analysis of a Generic Centrifuge Enrichment Plant

    Energy Technology Data Exchange (ETDEWEB)

    Lambert, H; Elayat, H A; O?Connell, W J; Szytel, L; Dreicer, M

    2007-05-31

    The U.S. Department of Energy (DOE) is interested in developing tools and methods for use in designing and evaluating safeguards systems for current and future plants in the nuclear power fuel cycle. The DOE is engaging several DOE National Laboratories in efforts applied to safeguards for chemical conversion plants and gaseous centrifuge enrichment plants. As part of the development, Lawrence Livermore National Laboratory has developed an integrated safeguards system analysis tool (LISSAT). This tool provides modeling and analysis of facility and safeguards operations, generation of diversion paths, and evaluation of safeguards system effectiveness. The constituent elements of diversion scenarios, including material extraction and concealment measures, are structured using directed graphs (digraphs) and fault trees. Statistical analysis evaluates the effectiveness of measurement verification plans and randomly timed inspections. Time domain simulations analyze significant scenarios, especially those involving alternate time ordering of events or issues of timeliness. Such simulations can provide additional information to the fault tree analysis and can help identify the range of normal operations and, by extension, identify additional plant operational signatures of diversions. LISSAT analyses can be used to compare the diversion-detection probabilities for individual safeguards technologies and to inform overall strategy implementations for present and future plants. Additionally, LISSAT can be the basis for a rigorous cost-effectiveness analysis of safeguards and design options. This paper will describe the results of a LISSAT analysis of a generic centrifuge enrichment plant. The paper will describe the diversion scenarios analyzed and the effectiveness of various safeguards systems alternatives.

  2. Design and test of a high pressure centrifugal compressor

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae Ho; Han, Chak Heui; Paeng, Ki Seok; Chen, Seung Bae [Samsung Techwin, Changwon (Korea, Republic of); Kim, Yong Ryun [Agency for Defense Development, Daejeon (Korea, Republic of)

    2005-07-01

    This paper presents an aerodynamic design, flow analysis and performance test of a pressure ratio 4:1 centrifugal compressor for gas turbine engine. The compressor is made up of a centrifugal impeller, a two-stage diffuser consisted of radial and axial types. The impeller has a 45 degree backswept angle and the design running tip clearance is 5% of impeller exit height. Three-dimensional numerical analysis is performed to analyze the flows in the impeller, diffuser and deswirler considering the impeller tip clearance. Test module and rig facilities for the compressor stage performance test are designed and fabricated. The overall compressor stage performances as well as the static pressure fields on the impeller and diffuser are measured. Two diffusers of wedge and airfoil types are tested with an impeller. The calculation and test results show that flow fields downstream the deswirler at the design and off-design points are highly nonuniform and the airfoil diffuser has the better aerodynamic characteristics than those of wedge diffuser.

  3. Ultrasonic wave scattering and characterization: centrifugally cast stainless steel

    International Nuclear Information System (INIS)

    Centrifugally cast stainless steel materials are widely used in the nuclear industry. Unfortunately, from the point of view of ultrasonic nondestructive testing for detection, location, classification, and sizing of defects, the material is difficult to size because of its anisotropic character. Ultrasonic wave propagation is not as well understood in anisotropic materials as wave propagation in isotropic materials. A numerical computer model is being developed to study wave propagation in anisotropic materials. The model is an extension of an ultrasonic field analysis model used to predict wave propagation in fluids. This new model includes mode conversion concepts at boundaries and considers wave speed a variable, with both position and propagation direction. Of primary concern in this work is the development of procedures to detect, locate, and classify anomalies inside an anisotropic material, and the potential masking effects of the anisotropic filter. A physical model of a reflector embedded in anisotropic half space was developed. A computational philosophy was also established. Progress has been made in understanding the phase velocity profiles as a function of angle for centrifugally cast stainless steel material, the resulting group velocities and beam deviation angle, the mathematics required for generating a point source solution in anisotropic media, the quasi-longitudinal and shear partition function, and the mode conversion principles on the surface of a reflector. Potential problems associated with anisotropic media inspection and possible anomaly classification and imaging were also established

  4. Control rod drive housing made of recrystallised centrifugal casting

    International Nuclear Information System (INIS)

    The possibility of fabricating the Control Rod Drive (CRD) Housings for Boiling Water Reactor (BWR) pressure vessels by recrystallised centrifugal casting without welding was investigated. The material used was to the specification ASME SA-351 CF3M, and after centrifugal casting it was cold formed by a process involving 15% to 30% plastic deformation before the final solution heat treatment, so that recrystallisation can be obtained. Various mechanical, metallurgical and nondestructive tests were performed, and the following superior characteristics were confirmed. Metallurgical tests showed that small austenite grain and 11 to 12% isolated ferrite are uniformly distributed throughout the whole parts of the CRD housing. Tests at room temperature, and up to 3000C on tensile specimens taken from various portions of the CRD housing were satisfactory. The weldability of the recrystallised casting CRD housing to Inconel stub tube was satisfactory. The attenuation of ultrasonic waves of the recrystallised casting was compared with those of cast and wrought material, and it was confirmed that ultrasonic tests can be performed with almost the same sensitivity as on wrought materials. When such nondestructive ultrasonic tests were made on the whole length of a typical sample, supported by liquid penetrant tests, no defective indications were found. (U.K.)

  5. Ultrasonic wave scattering and characterization: centrifugally cast stainless steel

    International Nuclear Information System (INIS)

    Of recent concern in nondestructive evaluation is the importance of inspecting anisotropic material. The anisotropic nature of centrifugally cast stainless steel (CCSS) used in the nuclear industry is discussed. There exists significant skew angle variations of 15 degrees or more at times that can cause serious problems in defect detection, location, classification, and sizing. With recent advances in the understanding of wave propagation in anisotropic media associated with critical angle refractivity, surface waves, plate waves, and longitudinal and shear wave scattering employing a newly developed point source Green's function numerical integration model, there exists an excellent chance that, once a material's characteristics are known with respect to its anisotropic character, a very accurate and a detailed defect classification analysis could be carried out. All the rules that exist today for studying defects in homogeneous isotropic media can most likely be extended to the anisotropic problem if the material characteristics are clearly established. The purpose of this work is to outline a numerical integration ultrasonic field analysis computation model and also to illustrate a variety of different experimental and analytical techniques that could be used to characterize the anisotropic nature and hence the corresponding grain structure associated with centrifugally cast stainless steel

  6. Analysis of Centrifugal Pump in Diffuser Vane By Using CFD

    Directory of Open Access Journals (Sweden)

    V.R.Sivakumar

    2014-02-01

    Full Text Available Flow analysis in centrifugal pumps has long been an intensive subject of research. Computational Fluid Dynamics (CFD is the present day state are created in different parts of the pump at off radial gaps. The operating characteristic curves predicted by the numerical simulation were compared with the results of model testing and are found in good agreement. The test case consists of an enshrouded centrifugal impeller with seven blades and a radial vane diffuser with 7 vanes. A large number of measurements are available in the radial gap between the impeller and the diffuse, makin of steady and unsteady calculations of the flow in the pump are compared with the experimental ones, and four different turbulent models are analyzed. The steady K frozen rotor concept, while the unsteady simulation uses a fully resolved sliding grid approach. The comparisons show that the unsteady numerical results accurately predict the unsteadiness of the flow, demonstrating the validit and applicability of that methodology for unsteady incompressible turbo machinery flow computations. The steady approach is less accurate, with an unphysical advection of the impeller wakes, but accurate enough for a crude approximation. The different turbulence models predict the flow at the same level of accuracy, with slightly different results.

  7. Flow Analysis of the Cleveland Clinic Centrifugal Pump

    Science.gov (United States)

    Veres, Joseph P.; Golding, Leonard A. R.; Smith, William A.; Horvath, David; Medvedev, Alexander

    1997-01-01

    An implantable ventricular assist rotordynamic blood pump is being developed by the Cleveland Clinic Foundation in cooperation with the NASA Lewis Research Center. At the nominal design condition, the pump provides blood flow at the rate of 5 liters per minute at a pressure rise of 100 mm of mercury and a rotative speed of 3000 RPM. Bench testing of the centrifugal pump in a water/glycerin mixture has provided flow and pressure data at several rotative speeds. A one-dimensional empirical based pump flow analysis computer code developed at NASA Lewis Research Center has been used in the design process to simulate the flow in the primary centrifugal pump stage. The computer model was used to size key impeller and volute geometric parameters that influence pressure rise and flow. Input requirements to the computer model include a simple representation of the pump geometry. The model estimates the flow conditions at the design and at off-design operating conditions at the impeller leading and trailing edges and the volute inlet and exit. The output from the computer model is compared to flow and pressure data obtained from bench testing.

  8. Concrete Cleaning, Inc. centrifugal shot blaster: Baseline report; Greenbook (chapter)

    International Nuclear Information System (INIS)

    The centrifugal shot blaster technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU's evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The centrifugal shot blaster is an electronically operated shot blast machine that has been modified to remove layers of concrete to varying depths. A hardened steel shot propelled at a high rate of speed abrades the surface of the concrete. The depth of material removed is determined by the rate of speed the machine is traveling and the volume of shot being fired into the blast chamber. The steel shot is recycled and used over until it is pulverized into dust, which ends up in the waste container with the concrete being removed. Debris is continually vacuumed by a large dust collection system attached to the shot blaster. The safety and health evaluation during the human factors assessment focused on two main areas: noise and dust

  9. On sound generation mechanism by a centrifugal blower

    Science.gov (United States)

    Wu, Sean

    2002-05-01

    Centrifugal blower noise has often been modeled as dipoles and quadrupoles to account for the effects of fluid-structure interaction and turbulence as the impeller rotates. However, many experimental results have shown that sound powers from centrifugal blowers increase with speed to the power of 4-6, which implies the existence of a monopole [Lighthill, Proc. R. Soc., Ser. A 222, 564-587 (1952)]. This paper demonstrates that such a monopole indeed exists for a blower running inside a heating ventilation and air-conditioning (HVAC) unit of a vehicle. Tests indicate that this monopole is producible by a volumetric fluctuation due to an unsteady rotor. When the blower is operated at the voltage power input specified by the car manufacturer, the sound power increases with the speed to the power of 4. When the blower is installed on a stable shaft and running at the same voltage power input, the volumetric fluctuations are significantly reduced and the sound power increases with speed to the power of 6. This implies that the monopole sound has been effectively replaced by the dipole sound. Since dipole is less effective in generating sound at low speeds than monopole, eliminating rotor fluctuations can lower vehicle HVAC noise levels.

  10. Cardio-postural interactions and short-arm centrifugation.

    Science.gov (United States)

    Blaber, Andrew; Goswami, Nandu; Xu, Da; Laurin, Alexendre

    INTRODUCTION: We are interested in mechanisms associated with orthostatic tolerance. In previous studies we have shown that postural muscles in the calf contribute to both posture and blood pressure regulation during orthostatic stress. In this study we investigated the relationship between cardiovascular and postural muscle control before, during and after short arm human centrifuge (SAHC) up to 2.2 G. METHODS: Eleven healthy young subjects (6 m, 5 f), with no history of cardiovascular disease, falls or orthostatic hypotension, participated. All were familiarized with the SAHC with 10 minutes at 1-G at the feet. Each subject was instrumented in the supine position on the SAHC for beat-to-beat ECG and blood pressure (Portapres derived SBP). Bilateral lower leg EMG was collected from four leg postural muscles: tibialis anterior, medial gastrocnemius, lateral gastrocnemius, and medial soleus. Transdermal differential recording of signals was performed using an 8-channel EMG system, (Myosystem 1200, Noraxon Inc., Arizona, USA). Postural sway data of the body COP was computed from the force and moment data collected with a force platform (Accusway, AMTI, MA, USA). Before and after SAHC, the subject stood on a force platform with their gaze fixed on a point at eye level, closed their eyes and stood quietly for 5 min. A final stand was conducted 30 min after centrifugation with supine rest in between. During clockwise centrifugation (10-min 1g and 10-min 2.2g at the foot) the subjects’ head was hooded and in the dark. The subject’s body was restrained into the rotation arm with a parachute harness and given additional body support with a foot-plate. ECG, EMG and BP data were collected throughout and centre of pressure trajectory (COP) collected during the stand test. Subjects were requested to relax and not to voluntarily contract the leg muscles; however, they were not to suppress contractions as they occurred involuntarily or by reflex. A Continuous Wavelet

  11. Stability Improvement of High-Pressure-Ratio Turbocharger Centrifugal Compressor by Asymmetric Flow Control—Part I: Non-Axisymmetrical Flow in Centrifugal Compressor

    OpenAIRE

    Yang, Mingyang; Zheng, Xinqian; Zhang, Yangjun; Bamba, Takahiro; Tamaki, Hideaki; Huenteler, Joern; Li, Zhigang

    2012-01-01

    This is Part I of a two-part paper documenting the development of a novel asymmetric flow control method to improve the stability of a high-pressure-ratio turbocharger centrifugal compressor. Part I focuses on the nonaxisymmetrical flow in a centrifugal compressor induced by the nonaxisymmetrical geometry of the volute while Part II describes the development of an asymmetric flow control method to avoid the stall on the basis of the characteristic of nonaxisymmetrical flow. To understand the ...

  12. Centrifugation. Sludge Treatment and Disposal Course #166. Instructor's Guide [and] Student Workbook.

    Science.gov (United States)

    Best, Richard A.

    An introductory description of the use of centrifuges in the process of volume reduction is provided in this lesson. Three basic centrifuges, their theory of operation, quality of cake and centrate, and operational control testing are discussed. The lesson includes an instructor's guide and student workbook. The instructor's guide contains a…

  13. Kinetics of carbon distribution in uranium doping elements and its alloys at centrifugal casting

    International Nuclear Information System (INIS)

    The report presents results of the metallic Uranium and its Zirconium and Niobium alloys centrifugal cas-ting influence on the distribution mode of the alloying elements in casts,structure and carbide composition.Distribution mechanism of carbon and alloying elements in Uranium during centrifugal casting is suggested in the report

  14. Structure and properties of metal of commercial steam pipes produced by centrifugal casting

    International Nuclear Information System (INIS)

    Structure and properties of metal of large diameter pipes produced by centrifugal casting of 15Kh1M1FL steel are investigated. It is shown that the structure of centrifugally cast pipe metal is much more in homogeneous than that of hot-rolled pipes

  15. 77 FR 65360 - Grant of Authority for Subzone Status (Centrifugal and Submersible Pumps); Auburn, NY

    Science.gov (United States)

    2012-10-26

    ... subzone at the centrifugal and submersible pump manufacturing and warehousing facilities of Xylem Water..., filed 10-21-2011); Whereas, notice inviting public comment has been given in the Federal Register (76 FR... Foreign-Trade Zones Board Grant of Authority for Subzone Status (Centrifugal and Submersible...

  16. Numerical Calculation of the Three-Dimensional Swirling Flow Inside the Centrifugal Pump Volutes

    Directory of Open Access Journals (Sweden)

    E. Cezmi Nursen

    2003-01-01

    Full Text Available The flow inside the volute of a centrifugal pump is threedimensional and, depending upon the position of the inlet relative to the cross-section center line, a single or double swirling flow occurs. The purpose of this study was the calculation of the three-dimensional swirling flow inside the centrifugal pump volute.

  17. Smoothed Particle Hydro-dynamic Analysis of Improvement in Sludge Conveyance Efficiency of Screw Decanter Centrifuge

    Energy Technology Data Exchange (ETDEWEB)

    Park, Dae Woong [Korea Testing and Research Institute, Kwachun (Korea, Republic of)

    2015-03-15

    A centrifuge works on the principle that particles with different densities will separate at a rate proportional to the centrifugal force during high-speed rotation. Dense particles are quickly precipitated, and particles with relatively smaller densities are precipitated more slowly. A decanter-type centrifuge is used to remove, concentrate, and dehydrate sludge in a water treatment process. This is a core technology for measuring the sludge conveyance efficiency improvement. In this study, a smoothed particle hydro-dynamic analysis was performed for a decanter centrifuge used to convey sludge to evaluate the efficiency improvement. This analysis was applied to both the original centrifugal model and the design change model, which was a ball-plate rail model, to evaluate the sludge transfer efficiency.

  18. A high acceleration programmable centrifuge used in purification of myocardial and skeletal muscle myosins.

    Science.gov (United States)

    Wikman-Coffelt, J; Coffelt, R J

    1981-02-01

    Protein purification can be improved by using high acceleration - deceleraton centrifugation. This study describes a high acceleration programmable centrifuge which reaches 5,000 x g in 3 sec and brakes from 5,000 to 0 x g in 4.3 sec. This study further describes the use of this centrifuge in myosin purification and thus demonstrates that protein purification can be improved by separating particles with a high acceleration - deceleration centrifuge for the following reasons: (1) biological and chemical equilibria are immediately terminated, (2) proteolysis is reduced, (3) working time is decreased, and (4) the native state of labile proteins are better preserved. Rapid acceleration and deceleration is advantageous in reducing centrifugation time for separation of particles because it decreases diffusion time of particles and non-desirable interactions. PMID:6452672

  19. Smoothed Particle Hydro-dynamic Analysis of Improvement in Sludge Conveyance Efficiency of Screw Decanter Centrifuge

    International Nuclear Information System (INIS)

    A centrifuge works on the principle that particles with different densities will separate at a rate proportional to the centrifugal force during high-speed rotation. Dense particles are quickly precipitated, and particles with relatively smaller densities are precipitated more slowly. A decanter-type centrifuge is used to remove, concentrate, and dehydrate sludge in a water treatment process. This is a core technology for measuring the sludge conveyance efficiency improvement. In this study, a smoothed particle hydro-dynamic analysis was performed for a decanter centrifuge used to convey sludge to evaluate the efficiency improvement. This analysis was applied to both the original centrifugal model and the design change model, which was a ball-plate rail model, to evaluate the sludge transfer efficiency.

  20. Simulation and sensitivity analysis on process of switching double centrifugal pump

    International Nuclear Information System (INIS)

    The experimental and simulating processes of switching centrifugal pump in the double centrifugal pump water supply system were studied. The experiment results verified the validity of the model. Based on the sensitivity analysis of the experimental process with the model, we can get the following conclusions: In the process of switching centrifugal pump in the double centrifugal pump water supply system, the smaller the system flow and the greater the centrifugal moment of inertia, the greater the loss water, the smaller the minimum flow rate, the longer the system recovery stability; the smaller the characteristic time of the check valves, the more stable the flow volatility of the main circuit, but the volatility of the system flow during switching is very limited. (authors)

  1. Response of rat body composition to simultaneous exercise and centrifugation at 3.14g

    Science.gov (United States)

    Pitts, G. C.; Oyama, J.

    1982-01-01

    A study is described calling into question the hypothesis that an increased physical load during chronic centrifugation contributes to the body composition changes observed in centrifuged rats. Considering fat-free and fat-free dry masses of the total body and carcass, it is seen that centrifugation combined with either wheel running or restraint reduced these masses to approximately 85% of the respective 1-g values, that is, the same result with either sedentary rats or rats running several hundred meters per day. It is pointed out that if an effect of a centrifugation-induced load is present but hidden by opposing factors, an analysis of variance should reveal it as an interaction between acceleration and other variables; however, no such interactions are found here. Tables are included emphasizing the pervasive influence of chronic centrifugation after only 12 days exposure.

  2. The potential of centrifugal casting for the production of near net shape uranium parts

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, E. [United States Air Force Academy, Colorado Springs, CO (US). Dept. of Engineering Mechanics

    1993-09-01

    This report was written to provide a detailed summary of a literature survey on the near net shape casting process of centrifugal casting. Centrifugal casting is one potential casting method which could satisfy the requirements of the LANL program titled Near Net Shape Casting of Uranium for Reduced Environmental, Safety and Health Impact. In this report, centrifugal casting techniques are reviewed and an assessment of the ability to achieve the near net shape and waste minimization goals of the LANL program by using these techniques is made. Based upon the literature reviewed, it is concluded that if properly modified for operation within a vacuum, vertical or horizontal centrifugation could be used to safely cast uranium for the production of hollow, cylindrical parts. However, for the production of components of geometries other than hollow tubes, vertical centrifugation could be combined with other casting methods such as semi-permanent mold or investment casting.

  3. The potential of centrifugal casting for the production of near net shape uranium parts

    International Nuclear Information System (INIS)

    This report was written to provide a detailed summary of a literature survey on the near net shape casting process of centrifugal casting. Centrifugal casting is one potential casting method which could satisfy the requirements of the LANL program titled Near Net Shape Casting of Uranium for Reduced Environmental, Safety and Health Impact. In this report, centrifugal casting techniques are reviewed and an assessment of the ability to achieve the near net shape and waste minimization goals of the LANL program by using these techniques is made. Based upon the literature reviewed, it is concluded that if properly modified for operation within a vacuum, vertical or horizontal centrifugation could be used to safely cast uranium for the production of hollow, cylindrical parts. However, for the production of components of geometries other than hollow tubes, vertical centrifugation could be combined with other casting methods such as semi-permanent mold or investment casting

  4. Effects of Impeller-Diffuser Interaction on Centrifugal Compressor Performance

    Science.gov (United States)

    Tan, Choon S.

    2003-01-01

    This research program focuses on characterizing the effect of impeller-diffuser interactions in a centrifugal compressor stage on its performance using unsteady threedimensional Reynolds-averaged Navier-Stokes simulations. The computed results show that the interaction between the downstream diffuser pressure field and the impeller tip clearance flow can account for performance changes in the impeller. The magnitude of performance change due to this interaction was examined for an impeller with varying tip clearance followed by a vaned or vaneless diffuser. The impact of unsteady impeller-diffuser interaction, primarily through the impeller tip clearance flow, is reflected through a time-averaged change in impeller loss, blockage and slip. The results show that there exists a tip clearance where the beneficial effect of the impeller-diffuser interaction on the impeller performance is at a maximum. A flow feature that consists of tip flow back leakage was shown to occur at design speed for the centrifugal compressor stage. This flow phenomenon is described as tip flow that originates in one passage, flows downstream of the impeller trailing edge and then returns to upstream of the impeller trailing edge of a neighboring passage. Such a flow feature is a source of loss in the impeller. A hypothesis is put forth to show that changing the diffuser vane count and changing impeller-diffuser gap has an analogous effect on the impeller performance. The centrifugal compressor stage was analyzed using diffusers of different vane counts, producing an impeller performance trend similar to that when the impeller-diffuser gap was varied, thus supporting the hypothesis made. This has the implication that the effect impeller performance associated with changing the impeller-diffuser gap and changing diffuser vane count can be described by the non-dimensional ratio of impeller-diffuser gap to diffuser vane pitch. A procedure is proposed and developed for isolating impeller passage

  5. Centrifugal photovoltaic and photogalvanic effects driven by structured light

    CERN Document Server

    Wätzel, Jonas

    2016-01-01

    Much efforts are devoted to material structuring in a quest to enhance the photovoltaic effect. We show that structuring light in a way it transfers orbital angular momentum to semiconductor-based rings results in a steady charge accumulation at the outer boundaries that be utilized for the generation of an open circuit voltage or a photogalvanic (bulk photovoltaic) type current. This effect which stems both from structuring light and matter (confinement potentials), can be magnified even at fixed moderate intensities, by increasing the orbital angular momentum of light which strengthens the effective centrifugal potential that repels the charge outwards. Based on a full numerical time propagation of the carriers wave functions in the presence of light pulses we demonstrate how the charge buildup leads to a useable voltage or directed photocurrent whose amplitudes and directions are controllable by the light pulse parameters.

  6. Stopping intense beams of internally cold molecules via centrifugal forces

    Science.gov (United States)

    Wu, Xing; Gantner, Thomas; Zeppenfeld, Martin; Chervenkov, Sotir; Rempe, Gerhard

    2016-05-01

    Cryogenic buffer-gas cooling produces intense beams of internally cold molecules. It offers a versatile source for studying collision dynamics and reaction pathways in the cold regime, and could open new avenues for controlled chemistry, precision spectroscopy, and exploration of fundamental physics. However, an efficient deceleration of these beams still presents a challenge. Here, we demonstrate that intense and continuous beams of electrically guided molecules produced by a cryogenic buffer-gas cell can be brought to a halt by the centrifugal force in a rotating frame. Various molecules (e.g. CH3F and CF3CCH) are decelerated to below 20m /s at a corresponding output intensity of ~ 6 ×109mm-2 .s-1 . In addition, our RF-resonant depletion detection shows that up to 90 % rotational-state purity can be achieved in the so-produced slow molecular beams.

  7. Centrifugal stretching along the ground state band of 168Hf

    International Nuclear Information System (INIS)

    The lifetimes of the Jπ=4+, 6+, 8+, and 10+ levels along the ground state band in 168Hf were measured by means of the recoil distance Doppler shift (RDDS) method using the New Yale Plunger Device (NYPD) and the SPEEDY detection array at Wright Nuclear Structure Laboratory of Yale University. Excited states in 168Hf were populated using the 124Sn(48Ti,4n) fusion evaporation reaction. The new lifetime values are sufficiently precise to clearly prove the increase of quadrupole deformation as a function of angular momentum in the deformed nucleus 168Hf. The data agree with the predictions from the geometrical confined β-soft (CBS) rotor model that involves centrifugal stretching in a soft potential

  8. A small centrifugal pump for circulating cryogenic helium

    International Nuclear Information System (INIS)

    A small centrifugal pump is described which has been developed to circulate supercritical helium through a test loop for superconducting magnets. The pump has a fully enclosed warm and which contains the adjustable speed brushless DC drive motor and self-acting bearings operating in helium gas. The drive and bearing system is designed to minimize contaimination to the circulating supercritical helium in the test loop. The performance data which have been obtained show that the pump operates very close to its design specifications. Additional tests are planned to provide a more complete range of performance data for the pump. Subsequent record discussion concerned the pump shaft and the efficiency of the heat leak to the heat station. Efficiency of at least 65% is attainable with this pump, including all heat leak

  9. Centrifugal photovoltaic and photogalvanic effects driven by structured light.

    Science.gov (United States)

    Wätzel, J; Berakdar, J

    2016-01-01

    Much efforts are devoted to material structuring in a quest to enhance the photovoltaic effect. We show that structuring light in a way it transfers orbital angular momentum to semiconductor-based rings results in a steady charge accumulation at the outer boundaries that can be utilized for the generation of an open circuit voltage or a photogalvanic (bulk photovoltaic) type current. This effect which stems both from structuring light and matter confinement potentials, can be magnified even at fixed moderate intensities, by increasing the orbital angular momentum of light which strengthens the effective centrifugal potential that repels the charge outwards. Based on a full numerical time propagation of the carriers wave functions in the presence of light pulses we demonstrate how the charge buildup leads to a useable voltage or directed photocurrent whose amplitudes and directions are controllable by the light pulse parameters. PMID:26900105

  10. Centrifugal photovoltaic and photogalvanic effects driven by structured light

    Science.gov (United States)

    Wätzel, J.; Berakdar, J.

    2016-02-01

    Much efforts are devoted to material structuring in a quest to enhance the photovoltaic effect. We show that structuring light in a way it transfers orbital angular momentum to semiconductor-based rings results in a steady charge accumulation at the outer boundaries that can be utilized for the generation of an open circuit voltage or a photogalvanic (bulk photovoltaic) type current. This effect which stems both from structuring light and matter confinement potentials, can be magnified even at fixed moderate intensities, by increasing the orbital angular momentum of light which strengthens the effective centrifugal potential that repels the charge outwards. Based on a full numerical time propagation of the carriers wave functions in the presence of light pulses we demonstrate how the charge buildup leads to a useable voltage or directed photocurrent whose amplitudes and directions are controllable by the light pulse parameters.

  11. Use of partially shrouded impeller in a small centrifugal compressor

    Institute of Scientific and Technical Information of China (English)

    Jin Tang; Teemu Turunen-Saaresti; Jaakko Larjola

    2008-01-01

    Numerical analysis is conducted for the 3-dimensional impeller and vaneless diffuser of a small centrifugal compressor. The influence of impeller tip clearance on the flow field of the impeller is investigated. Detailed investigation on the leaking flow across the tip clearance of the impeller shows that the leaking flow rate is higher near the exit of the impeller than that near the inlet of the impeller. Based on this phenomenon, a new partially shrouded impeller is designed. The impeller is shrouded near the exit of the impeller. Numerical results show that the secondary flow region becomes smaller at the exit of the impeller. Better performance is achieved than that with the unshrouded impeller.

  12. Capture into resonance and phase space dynamics in optical centrifuge

    Science.gov (United States)

    Armon, Tsafrir; Friedland, Lazar

    2016-05-01

    The process of capture of a molecular enesemble into rotational resonance in the optical centrifuge is investigated. The adiabaticity and phase space incompressibility are used to find the resonant capture probability in terms of two dimensionless parameters P1 , 2 characterising the driving strength and the nonlinearity, and related to three characteristic time scales in the problem. The analysis is based on the transformation to action-angle variables and the single resonance approximation, yielding reduction of the three-dimensional rotation problem to one degree of freedom. The analytic results for capture probability are in a good agreement with simulations. The existing experiments satisfy the validity conditions of the theory. This work was supported by the Israel Science Foundation Grant 30/14.

  13. Cavitating flow investigation inside centrifugal impellers for a condensate pump

    International Nuclear Information System (INIS)

    In order to investigate the effect of blade inlet angle on centrifugal pump cavitation performance, numerical simulation of cavitating turbulent flow is conducted for a condensate pump with different impellers based on SST k−ω turbulence model and a mixture cavitation model. The results indicate that for a condensate pump having meridional section with larger area at blade leading edge compared with conventional pumps, the reverse flows inside the blade-to-blade channels are not negligible. It is noted that large incidence at blade leading edge is helpful to improve the cavitation performance for the pump. The possible reason may be the growth of cavities inside the impeller has less influence on the flow in the channel between two neighboring blades. Further, uniform incidence angle along the blade leading edge is preferable for the improvement of cavitation performance.

  14. Systems approach used in the Gas Centrifuge Enrichment Plant

    Energy Technology Data Exchange (ETDEWEB)

    Rooks, W.A. Jr.

    1982-01-01

    A requirement exists for effective and efficient transfer of technical knowledge from the design engineering team to the production work force. Performance-Based Training (PBT) is a systematic approach to the design, development, and implementation of technical training. This approach has been successfully used by the US Armed Forces, industry, and other organizations. The advantages of the PBT approach are: cost-effectiveness (lowest life-cycle training cost), learning effectiveness, reduced implementation time, and ease of administration. The PBT process comprises five distinctive and rigorous phases: Analysis of Job Performance, Design of Instructional Strategy, Development of Training Materials and Instructional Media, Validation of Materials and Media, and Implementation of the Instructional Program. Examples from the Gas Centrifuge Enrichment Plant (GCEP) are used to illustrate the application of PBT.

  15. Performance Improvement of a Centrifugal Compressor by Passive Means

    Directory of Open Access Journals (Sweden)

    N. Sitaram

    2012-01-01

    Full Text Available The present experimental investigation deals with performance improvement of a low-speed centrifugal compressor by inexpensive passive means such as turbulence generator placed at different positions and partial shroud near the rotor blade tip. The experiments are carried out at three values of tip clearance, namely 2.2%, 5.1%, and 7.9% of rotor blade height at the exit. Performance tests are carried out for a total of 13 configurations. From these measurements, partial shroud is found to give the best performance. The improvement in the compressor performance may be due to the reduction of tip leakage flows by the small extension of partial shroud (2 mm on the pressure surface side. Although there is nominal change in performance due to turbulence generator (TG, TG has beneficial effect of increased operating range.

  16. Operational Experience with a Cryogenic Axial-Centrifugal Compressor

    CERN Document Server

    Decker, L; Löhlein, K; Purtschert, W; Ziegler, B L; Lebrun, P; Tavian, L; Brunovsky, I; Tucek, L

    1998-01-01

    The Large Hadron Collider (LHC), presently under construction at CERN, requires large refrigeration capacity at 1.8 K. Compression of gaseous helium at cryogenic temperatures is therefore inevitable. Together with subcontractors, Linde Kryotechnik has developed a prototype machine. This unit is based on a cryogenic axial-centrifugal compressor, running on ceramic ball bearings and driven by a variable-frequency electrical motor operating at ambient temperature. Integrated in a test facility for superconducting magnets the machine has been commissioned without major problems and successfully gone through the acceptance test in autumn 1995. Subsequent steps were initiated to improve efficiency of this prototype. This paper describes operating experience gained so far and reports on measured performance prior to and after constructional modifications.

  17. A cryogenic axial-centrifugal compressor for superfluid helium refrigeration

    CERN Document Server

    Decker, L; Schustr, P; Vins, M; Brunovsky, I; Lebrun, P; Tavian, L

    1997-01-01

    CERN's new project, the Large Hadron Collider (LHC), will use superfluid helium as coolant for its high-field superconducting magnets and therefore require large capacity refrigeration at 1.8 K. This may only be achieved by subatmospheric compression of gaseous helium at cryogenic temperature. To stimulate development of this technology, CERN has procured from industry prototype Cold Compressor Units (CCU). This unit is based on a cryogenic axial-centrifugal compressor, running on ceramic ball bearings and driven by a variable-frequency electrical motor operating under low-pressure helium at ambient temperature. The machine has been commissioned and is now in operation. After describing basic constructional features of the compressor, we report on measured performance.

  18. A Novel Aerodynamic Design Method for Centrifugal Compressor Impeller

    Directory of Open Access Journals (Sweden)

    Mahdi Nili-Ahmadabadi

    2014-01-01

    Full Text Available This paper describes a new quasi-3D design method for centrifugal compressor impeller. The method links up a novel inverse design algorithm, called Ball-Spine Algorithm (BSA, and a quasi-3D analysis. Euler equation is solved on the impeller meridional plane. The unknown boundaries (hub and shroud of numerical domain are iteratively modified by BSA until a target pressure distribution in flow passage is reached. To validate the quasi-3D analysis code, existing compressor impeller is investigated experimentally. Comparison between the quasi-3D analysis and the experimental results shows good agreement. Also, a full 3D Navier-Stokes code is used to analyze the existing and designed compressor numerically. The results show that the momentum decrease near the shroud wall in the existing compressor is removed by hub-shroud modifications resulting an improvement in performance by 0.6 percent.

  19. Numerical Investigation of Flow in a Centrifugal Compressor

    Science.gov (United States)

    Grishin, Yu. A.; Bakulin, V. N.

    2015-09-01

    With the use of the domestic software suite of computational hydrodynamics Flow Vision based on application of the method of control volumes, numerical simulation of air composition and delivery by a centrifugal compressor employed for supercharging a piston engine has been carried out. The head-flow characteristics of the compressor, as well as the 3D fields of flow velocity and pressure distributions in the elements of the compressor flow passage, including the interblade channels of the impeller, have been obtained for various regimes. In the regimes of diminished air flow rate, surging phenomena are identified, characterized by a return flow. The application of the technique of numerical experiment will make it possible from here on to carry out design optimization of the compressor flow passage profile and thus to improve its basic characteristics — the degree of pressure increase, compressed air flow rate, and the efficiency — as well as to reduce the costs of the development and production of compressors.

  20. Numerical analysis of 3-D potential flow in centrifugal turbomachines

    Science.gov (United States)

    Daiguji, H.

    1983-09-01

    A numerical method is developed for analysing a three-dimensional steady incompressible potential flow through an impeller in centrifugal turbomachines. The method is the same as the previous method which was developed for the axial flow turbomachines, except for some treatments in the downstream region. In order to clarify the validity and limitation of the method, a comparison with the existing experimental data and numerical results is made for radial flow compressor impellers. The calculated blade surface pressure distributions almost coincide with the quasi-3-D calculation by Krimerman and Adler (1978), but are different partly from the quasi-3-D calculation using one meridional flow analysis. It is suggested from this comparison that the flow through an impeller with high efficiency near the design point can be predicted by this fully 3-D numerical method.

  1. Numerical study of a high-speed miniature centrifugal compressor

    Science.gov (United States)

    Li, Xiaoyi

    A miniature centrifugal compressor is a key component of reverse Brayton cycle cryogenic cooling system. The system is commonly used to generate a low cryogenic temperature environment for electronics to increase their efficiency, or generate, store and transport cryogenic liquids, such as liquid hydrogen and oxygen, where space limit is also an issue. Because of space limitation, the compressor is composed of a radial IGV, a radial impeller and an axial-direction diffuser (which reduces the radial size because of smaller diameter). As a result of reduction in size, rotating speed of the impeller is as high as 313,000 rpm, and Helium is used as the working fluid, in order to obtain the required static pressure ratio/rise. Two main characteristics of the compressor---miniature and high-speed, make it distinct from conventional compressors. Higher compressor efficiency is required to obtain a higher COP (coefficient of performance) system. Even though miniature centrifugal compressors start to draw researchers' attention in recent years, understanding of the performance and loss mechanism is still lacking. Since current experimental techniques are not advanced enough to capture details of flow at miniature scale, numerical methods dominate miniature turbomachinery study. This work numerically studied a high speed miniature centrifugal compressor with commercial CFD code. The overall performance of the compressor was predicted with consideration of interaction between blade rows by using sliding mesh model. The law of similarity of turbomachinery was validated for small scale machines. It was found that the specific ratio effect needs to be considered when similarity law is applied. But Reynolds number effect can be neglected. The loss mechanism of each component was analyzed. Loss due to turning bend was significant in each component. Tip leakage loss of small scale turbomachines has more impact on the impeller performance than that of large scale ones. Because the

  2. Calculating High Speed Centrifugal Compressor Performance from Averaged Measurements

    Science.gov (United States)

    Lou, Fangyuan; Fleming, Ryan; Key, Nicole L.

    2012-12-01

    To improve the understanding of high performance centrifugal compressors found in modern aircraft engines, the aerodynamics through these machines must be experimentally studied. To accurately capture the complex flow phenomena through these devices, research facilities that can accurately simulate these flows are necessary. One such facility has been recently developed, and it is used in this paper to explore the effects of averaging total pressure and total temperature measurements to calculate compressor performance. Different averaging techniques (including area averaging, mass averaging, and work averaging) have been applied to the data. Results show that there is a negligible difference in both the calculated total pressure ratio and efficiency for the different techniques employed. However, the uncertainty in the performance parameters calculated with the different averaging techniques is significantly different, with area averaging providing the least uncertainty.

  3. Subsychronous vibration of multistage centrifugal compressors forced by rotating stall

    Science.gov (United States)

    Fulton, J. W.

    1987-01-01

    A multistage centrifugal compressor, in natural gas re-injection service on an offshore petroleum production platform, experienced subsynchronous vibrations which caused excessive bearing wear. Field performance testing correlated the subsynchronous amplitude with the discharge flow coefficient, demonstrating the excitation to be aerodynamic. Adding two impellers allowed an increase in the diffuser flow angle (with respect to tangential) to meet the diffuser stability criteria based on factory and field tests correlated using the theory of Senoo (for rotating stall in a vaneless diffuser). This modification eliminated all significant subsynchronous vibrations in field service, thus confirming the correctness of the solution. Other possible sources of aerodynamically induced vibrations were considered, but the judgment that those are unlikely has been confirmed by subsequent experience with other similar compressors.

  4. Ion exchange separation for decontamination of centrifuge enrichment plant

    International Nuclear Information System (INIS)

    Ion exchange separation of uranyl ion (UO22+) from metal cations has been carried out by the columnar operation using ion exchange resins in 0.1 mol/dm3 sulfuric acid medium. Uranyl ion was adsorbed in an anion exchange resin and the rest metal cations, Fe(III), Al(III), Cr(III), Ni(II) and Cu(II) ions, were adsorbed in a cation exchange resin in this system. Desorption of uranyl ion and metal cations adsorbed in the resins were tested by 2 mol/dm3 sulfuric acid solution. Desorbed elements were confirmed to be precipitated by appropriate alkaline solutions. On the basis of the results obtained, a concept was made on a decontamination system for uranium-contaminated waste solution from centrifuge enrichment plant. (author)

  5. Gas Centrifuge Enrichment Plant seismic time history development

    International Nuclear Information System (INIS)

    The objective of this study is to generate a number of artificial-spectrum consistent-time histories for use in the seismic analysis of the Gas Centrifuge Enrichment Plant (GCEP) service modules (SM). The method used in the generation of the artificial time histories presented in this report makes use of the fast Fourier transform (FFT) algorithm to modify the Fourier frequency spectrum of a recorded accelerogram. The response spectrum of the generated accelerogram is consistent with the spectrum specification given by USAEC Regulatory Guide 1.60. Five statistically independent time histories have been developed. These accelerograms are based on recorded West Coast accelerations that meet specific requirements associated with the location of the recording station with regard to the epicenter. The acceleration time history, Fourier and response spectras, and integrated velocity and displacement records are presented

  6. Transient analysis of charging system with centrifugal charging pumps

    International Nuclear Information System (INIS)

    The CARD (CVCS Analysis for Design) code has been developed for the transient analysis of the letdown and charging system of Korea Standard Nuclear Power Plant. The computer code has been already verified and validated by comparing with actual test results. Analyzed in this paper are the flow and pressure transients in the charging line. The sensitivity studies are performed to select the acceptable control parameters of charging line backpressure controller and seal injection flow controller. In addition, the seal injection system transient is evaluated for the pressurizer auxiliary spray operation. It is shown that the charging line backpressure controller control parameters yield a significant effect on the charging system stability. The results obtained from this study will be used to verify the system design and to select the optimum control parameters for the charging system with centrifugal charging pumps

  7. Centrifugally driven microfluidic disc for detection of chromosomal translocations

    DEFF Research Database (Denmark)

    Brøgger, Anna Line; Kwasny, Dorota; Bosco, Filippo G.;

    2012-01-01

    Chromosome translocations are a common cause of congenital disorders and cancer. Current detection methods require use of expensive and highly specialized techniques to identify the chromosome regions involved in a translocation. There is a need for rapid yet specific detection for diagnosis and...... prognosis of patients. In this work we demonstrate a novel, centrifugally-driven microfluidic system for controlled manipulation of oligonucleotides and subsequent detection of chromosomal translocations. The device is fabricated in the form of a disc with capillary burst microvalves employed to control the...... fluid flow. The microvalves in series are designed to enable fluid movement from the center towards the periphery of the disc to handle DNA sequences representing translocation between chromosome 3 and 9. The translocation detection is performed in two hybridization steps in separate sorting and...

  8. Cell Electrofusion in Centrifuged Erythrocyte Pellets Assessed by Dielectric Spectroscopy.

    Science.gov (United States)

    Asami, Koji

    2016-04-01

    We have characterized cell electrofusion in cell pellets by dielectric spectroscopy. Cell pellets were formed from horse erythrocyte suspensions by centrifugation and were subjected to intense AC pulses. The dielectric spectra of the pellets were measured over a frequency range of 10 Hz to 10 MHz. The application of AC pulses caused low-frequency (LF) dielectric relaxation below about 100 kHz. The LF dielectric relaxation was markedly affected not only by pretreatment of cells at 50 °C, which disrupts the spectrin network of erythrocytes, but also by the parameters of the AC pulses (frequency of the sine wave and repeat count of the pulses). The occurrence of the LF dielectric relaxation was qualitatively accounted for by modeling fusion products in the pellet by prolate spheroidal cells whose long axes run parallel to the applied electric field. PMID:26407874

  9. Systems approach used in the Gas Centrifuge Enrichment Plant

    International Nuclear Information System (INIS)

    A requirement exists for effective and efficient transfer of technical knowledge from the design engineering team to the production work force. Performance-Based Training (PBT) is a systematic approach to the design, development, and implementation of technical training. This approach has been successfully used by the US Armed Forces, industry, and other organizations. The advantages of the PBT approach are: cost-effectiveness (lowest life-cycle training cost), learning effectiveness, reduced implementation time, and ease of administration. The PBT process comprises five distinctive and rigorous phases: Analysis of Job Performance, Design of Instructional Strategy, Development of Training Materials and Instructional Media, Validation of Materials and Media, and Implementation of the Instructional Program. Examples from the Gas Centrifuge Enrichment Plant (GCEP) are used to illustrate the application of PBT

  10. Ultrasonic NDT and imaging of centrifugally cast stainless steel samples

    International Nuclear Information System (INIS)

    This paper examines the application of a split-spectrum processing (SSP) technique for detection of defects in centrifugally cast stainless steel (CCSS) samples. Nonlinear polarity thresholding and minimization algorithms were derived and were shown to provide significant enhancement in the signal-to-noise ratio. The optimal processing parameters for the two nonlinear SSP algorithms were identified experimentally; the choice of window bandwidth and spectral region were the most critical parameters. These parameters were shown to be relatively similar for both columnar and equiaxial samples. A bandpass filtering technique, which yielded substantial grain noise suppression in stainless steel data in previous work, was unsuccessful in providing signal-to-noise ratio enhancement for the CCSS samples. Therefore, the experimental results indicate that the SSP technique in conjunction with the nonlinear algorithms is highly effective in suppressing grain noise and enhancing the flaw signal in CCSS components

  11. Origins of hydrodynamic forces on centrifugal pump impellers

    Science.gov (United States)

    Adkins, Douglas R.; Brennen, Christopher E.

    1987-01-01

    Hydrodynamic interactions that occur between a centrifugal pump impeller and volute are experimentally and theoretically investigated. The theoretical analysis considers the inability of the blades to perfectly guide the flow through the impeller, and also includes a quasi-one dimensional treatment of the flow in the volute. The disturbance at the impeller discharge and the resulting forces are determined by the theoretical model. The model is then extended to obtain the hydrodynamic force perturbations that are caused by the impeller whirling eccentrically in the volute. Under many operating conditions, these force perturbations were found to be destablizing. Comparisons are made between the theoretical model and the experimental measurements of pressure distributions and radial forces on the impeller. The theoretical model yields fairly accurate predictions of the radial forces caused by the flow through the impeller. However, it was found that the pressure acting on the front shroud of the impeller has a substantial effect on the destablizing hydrodynamic forces.

  12. Cavitation Performance of a Centrifugal Pump with Water and Mercury

    Science.gov (United States)

    Hammitt, F. G.; Barton, R. K.; Cramer, V. F.; Robinson, M. J.

    1961-01-01

    The cavitation performance of a given centrifugal pump with water (hot and cold) and mercury is compared. It is found that there are significant scale effects with all fluids tested, with the Thoma cavitation parameter decreasing in all cases for increased pump speed or fluid Reynolds' number. The data for a fixed flow coefficient fall into a single curve when plotted against pump speed (or fluid velocity), rather than against Reynolds' number. Conversely, the Thoma parameter for a given Reynolds' number is approximately twice as large for mercury as for water. The direction of this variation is as predicted from consideration of the cavitation thermodynamic parameters which vary by a factor of 10(exp 7) between these fluids. No difference in cavitation performance between hot and cold water (approximately 160 F and 80 F) was observed, However, the thermodynamic parameters vary only by a factor of 5.

  13. Approaches to Stable Operation of Shaftless Centrifugal Pump

    Institute of Scientific and Technical Information of China (English)

    Ryunosuke Kawashima; Mitsuo Uno; Toshiaki Kanemoto

    2009-01-01

    The shaft-less impeller of the centrifugal pump, which is driven by the magnetic induction, was developed. The impeller rotates under the floating condition without any control device. The floating condition of the impeller is realized by utilizing the pressure in pump casing. The pump performance and the rotational behavior of the im-peUer were investigated experimentally. It has found that the floating position of the impeller become quite unsta-ble in a partial flow rate operation. And the pressure distribution at the casing wall affects the rotational posture of the impeller. This paper presents the effect of the casing treatment on the rotational posture of the impeller and the pressure distribution. The reasonable casing treatment is available for the stable rotational posture of the impeller.

  14. Characterization of a centrifugal pump in He II

    Science.gov (United States)

    Weisend, J. G., II; Van Sciver, S. W.

    1988-01-01

    As part of an effort to determine the feasibility of helium transfer in space, a centrifugal pump was tested in He II at a variety of flow rates, pump speeds, and fluid temperatures. The pump, which has a straight bladed impeller 6.86 cm in diameter, generated a maximum pressure rise of 15 kPa and a maximum flow rate of 22 g/s for the conditions of the test. Pump performance seems to be independent of fluid temperature and is in good agreement with the values predicted by the manufacturer. Over the range of flow coefficients, the measured maximum efficiency is around 50 percent. Cavitation is observed in the pump and is thought to be highly dependent on the local heating of the helium in the pump. Preliminary measurements of the noise spectra of the pump suggest a possible mechanism to predict the onset of cavitation.

  15. DETECTION OF CAVITATION IN CENTRIFUGAL PUMP BY VIBRATION METHODS

    Institute of Scientific and Technical Information of China (English)

    NI Yongyan; YUAN Shouqi; PAN Zhongyong; YUAN Jianping

    2008-01-01

    For the purpose of detecting the cavitation of centrifugal pump onsite and real time, the vibration signals on varied operation conditions of both cavitation and non-cavitation obtained through acceleration sensors were analyzed. When cavitation occurs, the cavities near the leading edge of the blade will appear periodic oscillating, which will induce quasi-synchronous vibration. The frequency of the quasi-synchronous vibration symmetrically appears on the two sides of the blade passing frequency, by which the cavitation incipiency can be detected. During the developing process of the cavitation, as the severe complexity of the unsteady flow, it is very difficult to detect the development of cavitation by classical analysis methods. Fractal method of Higuchi is successfully used for detecting the incipiency, fully development of cavitation and the development between them.

  16. Study of blade clearance effects on centrifugal pumps

    Science.gov (United States)

    Hoshide, R. K.; Nielson, C. E.

    1972-01-01

    A program of analysis, design, fabrication, and testing has been conducted to develop and experimentally verify analytical models to predict the effects of impeller blade clearance on centrifugal pumps. The effect of tip clearance on pump efficiency, and the relationship between the head coefficient and torque loss with tip clearance was established. Analysis were performed to determine the cost variation in design, manufacture, and test that would occur between unshrouded and shrouded impellers. An impeller, representative of typical rocket engine impellers, was modified by removing its front shroud to permit variation of its blade clearances. It was tested in water with special instrumentation to provide measurements of blade surface pressures during operation. Pump performance data were obtained from tests at various impeller tip clearances. Blade pressure data were obtained at the nominal tip clearance. Comparisons of predicted and measured data are given.

  17. High separative power vacuum arc centrifuge (HSP-VAC)

    International Nuclear Information System (INIS)

    The reliability of supply of stable isotopes needed in medicine and science has been a problem for decades. Among the many sources of enriched stable isotopes are the Calutrons at Oak Ridge National Laboratory, ICONS of Cambridge Isotopes Limited, and reactors such as at Atomic Energy of Canada Ltd. and elsewhere. Alameda Applied Sciences Corporation (AASC) staff have spearheaded the development of a new type of isotope separator, dubbed the Vacuum Arc Centrifuge (VAC). This effort dates to the 1980s under National Science Foundation sponsorship at Yale, the early 1990s under a U.S. Department of Energy grant, and more recently, under AASC internal funding. The VAC consists of a vacuum arc discharge between a metal cathode (containing the substances to be separated) and a mesh anode across a small gap

  18. A multiple disk centrifugal pump as a blood flow device.

    Science.gov (United States)

    Miller, G E; Etter, B D; Dorsi, J M

    1990-02-01

    A multiple disk, shear force, valveless centrifugal pump was studied to determine its suitability as a blood flow device. A pulsatile version of the Tesla viscous flow turbine was designed by modifying the original steady flow pump concept to produce physiological pressures and flows with the aid of controlling circuitry. Pressures and flows from this pump were compared to a Harvard Apparatus pulsatile piston pump. Both pumps were connected to an artificial circulatory system. Frequency and systolic duration were varied over a range of physiological conditions for both pumps. The results indicated that the Tesla pump, operating in a pulsatile mode, is capable of producing physiologic pressures and flows similar to the Harvard pump and other pulsatile blood pumps. PMID:2312140

  19. Concrete Cleaning, Inc. centrifugal shot blaster: Baseline report; Summary

    International Nuclear Information System (INIS)

    The centrifugal shot blaster is an electronically operated shot-blast machine that removes layer of concrete of varying depths. Hardened steel shot propelled at a high rate of speed abrades the surface of the concrete. The depth of material removed is determined by the rate of speed the machine is traveling and the volume of shot being fired into the blast chamber. The steel shot is reused until it is pulverized to dust, which is deposited in the waste container with the concrete being removed. Debris is continually vacuumed by a large dust collection system attached to the shot blaster. The safety and health evaluation during the human factors assessment focused on two main areas: noise and dust

  20. Rigorous buoyancy driven bubble mixing for centrifugal microfluidics.

    Science.gov (United States)

    Burger, S; Schulz, M; von Stetten, F; Zengerle, R; Paust, N

    2016-01-21

    We present batch-mode mixing for centrifugal microfluidics operated at fixed rotational frequency. Gas is generated by the disk integrated decomposition of hydrogen peroxide (H2O2) to liquid water (H2O) and gaseous oxygen (O2) and inserted into a mixing chamber. There, bubbles are formed that ascent through the liquid in the artificial gravity field and lead to drag flow. Additionaly, strong buoyancy causes deformation and rupture of the gas bubbles and induces strong mixing flows in the liquids. Buoyancy driven bubble mixing is quantitatively compared to shake mode mixing, mixing by reciprocation and vortex mixing. To determine mixing efficiencies in a meaningful way, the different mixers are employed for mixing of a lysis reagent and human whole blood. Subsequently, DNA is extracted from the lysate and the amount of DNA recovered is taken as a measure for mixing efficiency. Relative to standard vortex mixing, DNA extraction based on buoyancy driven bubble mixing resulted in yields of 92 ± 8% (100 s mixing time) and 100 ± 8% (600 s) at 130g centrifugal acceleration. Shake mode mixing yields 96 ± 11% and is thus equal to buoyancy driven bubble mixing. An advantage of buoyancy driven bubble mixing is that it can be operated at fixed rotational frequency, however. The additional costs of implementing buoyancy driven bubble mixing are low since both the activation liquid and the catalyst are very low cost and no external means are required in the processing device. Furthermore, buoyancy driven bubble mixing can easily be integrated in a monolithic manner and is compatible to scalable manufacturing technologies such as injection moulding or thermoforming. We consider buoyancy driven bubble mixing an excellent alternative to shake mode mixing, in particular if the processing device is not capable of providing fast changes of rotational frequency or if the low average rotational frequency is challenging for the other integrated fluidic operations. PMID:26607320

  1. Modelling of flow with cavitation in centrifugal pump

    International Nuclear Information System (INIS)

    The paper concerns flow modelling in centrifugal pump with special consideration of cavitation phenomena. Cavitation occurs when local pressure drops below the saturation pressure according to the temperature of the flow. Vapour bubbles are created and then they flow through the areas with higher pressure. The bubbles collapse rapidly generating pressure wave, noise and vibration. Working under cavitation condition is very dangerous to a pump and can significantly shorten its lifetime. The investigated centrifugal pump consists of three two-flow rotors and stators working on a single shaft. The modelling process started with grid independence study. When the grid was chosen, the pump performance curve was obtained using the single phase fluid model. Next, using the results from pump performance curve calculations, the cavitation characteristic was obtained. The constant capacity was held when the pressure at the inlet was reduced. The two – phase model was used with Zwart cavitation model. The results indicate that the pump work in safe range of parameters. The analysis also provides wide range of information about the areas of vapour appearance. The most endangered regions are leading edges of rotor. When pressure at the inlet drops to about one third of pressure that calculations started from the cavitation cloud appears in whole rotor. The intense of vapour bubbles creation is greater near the shroud of the pump, rather than near the hub. As cavitation is strongly unsteady phenomena, the transient calculations were performed to check if the results are close to those obtained using the steady state type. The differences are not significant.

  2. Unsteady behavior and control of vortices in centrifugal compressor

    Science.gov (United States)

    Ohta, Yutaka; Fujisawa, Nobumichi

    2014-10-01

    Two examples of the use of vortex control to reduce noise and enhance the stable operating range of a centrifugal compressor are presented in this paper. In the case of high-flow operation of a centrifugal compressor with a vaned diffuser, a discrete frequency noise induced by interaction between the impeller-discharge flow and the diffuser vane, which appears most notably in the power spectra of the radiated noise, can be reduced using a tapered diffuser vane (TDV) without affecting the performance of the compressor. Twin longitudinal vortices produced by leakage flow passing through the tapered portion of the diffuser vane induce secondary flow in the direction of the blade surface and prevent flow separation from the leading edge of the diffuser. The use of a TDV can effectively reduce both the discrete frequency noise generated by the interaction between the impeller-discharge flow and the diffuser surface and the broadband turbulent noise component. In the case of low-flow operation, a leading-edge vortex (LEV) that forms on the shroud side of the suction surface near the leading edge of the diffuser increases significantly in size and blocks flow in the diffuser passage. The formation of an LEV may adversely affect the performance of the compressor and may cause the diffuser to stall. Using a one-side tapered diffuser vane to suppress the evolution of an LEV, the stable operating range of the compressor can be increased by more than 12 percent, and the pressure-rise characteristics of the compressor can be improved. The results of a supplementary examination of the structure and unsteady behavior of LEVs, conducted by means of detailed numerical simulations, are also presented.

  3. Modelling of flow with cavitation in centrifugal pump

    Science.gov (United States)

    Homa, D.; Wróblewski, W.

    2014-08-01

    The paper concerns flow modelling in centrifugal pump with special consideration of cavitation phenomena. Cavitation occurs when local pressure drops below the saturation pressure according to the temperature of the flow. Vapour bubbles are created and then they flow through the areas with higher pressure. The bubbles collapse rapidly generating pressure wave, noise and vibration. Working under cavitation condition is very dangerous to a pump and can significantly shorten its lifetime. The investigated centrifugal pump consists of three two-flow rotors and stators working on a single shaft. The modelling process started with grid independence study. When the grid was chosen, the pump performance curve was obtained using the single phase fluid model. Next, using the results from pump performance curve calculations, the cavitation characteristic was obtained. The constant capacity was held when the pressure at the inlet was reduced. The two - phase model was used with Zwart cavitation model. The results indicate that the pump work in safe range of parameters. The analysis also provides wide range of information about the areas of vapour appearance. The most endangered regions are leading edges of rotor. When pressure at the inlet drops to about one third of pressure that calculations started from the cavitation cloud appears in whole rotor. The intense of vapour bubbles creation is greater near the shroud of the pump, rather than near the hub. As cavitation is strongly unsteady phenomena, the transient calculations were performed to check if the results are close to those obtained using the steady state type. The differences are not significant.

  4. A Review of Centrifugal Testing of Gasoline Contamination and Remediation

    Directory of Open Access Journals (Sweden)

    Jay N. Meegoda

    2011-08-01

    Full Text Available Leaking underground storage tanks (USTs containing gasoline represent a significant public health hazard. Virtually undetectable to the UST owner, gasoline leaks can contaminate groundwater supplies. In order to develop remediation plans one must know the extent of gasoline contamination. Centrifugal simulations showed that in silty and sandy soils gasoline moved due to the physical process of advection and was retained as a pool of free products above the water table. However, in clayey soils there was a limited leak with lateral spreading and without pooling of free products above the water table. Amount leaked depends on both the type of soil underneath the USTs and the amount of corrosion. The soil vapor extraction (SVE technology seems to be an effective method to remove contaminants from above the water table in contaminated sites. In-situ air sparging (IAS is a groundwater remediation technology for contamination below the water table, which involves the injection of air under pressure into a well installed into the saturated zone. However, current state of the art is not adequate to develop a design guide for site implementation. New information is being currently generated by both centrifugal tests as well as theoretical models to develop a design guide for IAS. The petroleum contaminated soils excavated from leaking UST sites can be used for construction of highway pavements, specifically as sub-base material or blended and used as hot or cold mix asphalt concrete. Cost analysis shows that 5% petroleum contaminated soils is included in hot or cold mix asphalt concrete can save US$5.00 production cost per ton of asphalt produced.

  5. A review of centrifugal testing of gasoline contamination and remediation.

    Science.gov (United States)

    Meegoda, Jay N; Hu, Liming

    2011-08-01

    Leaking underground storage tanks (USTs) containing gasoline represent a significant public health hazard. Virtually undetectable to the UST owner, gasoline leaks can contaminate groundwater supplies. In order to develop remediation plans one must know the extent of gasoline contamination. Centrifugal simulations showed that in silty and sandy soils gasoline moved due to the physical process of advection and was retained as a pool of free products above the water table. However, in clayey soils there was a limited leak with lateral spreading and without pooling of free products above the water table. Amount leaked depends on both the type of soil underneath the USTs and the amount of corrosion. The soil vapor extraction (SVE) technology seems to be an effective method to remove contaminants from above the water table in contaminated sites. In-situ air sparging (IAS) is a groundwater remediation technology for contamination below the water table, which involves the injection of air under pressure into a well installed into the saturated zone. However, current state of the art is not adequate to develop a design guide for site implementation. New information is being currently generated by both centrifugal tests as well as theoretical models to develop a design guide for IAS. The petroleum contaminated soils excavated from leaking UST sites can be used for construction of highway pavements, specifically as sub-base material or blended and used as hot or cold mix asphalt concrete. Cost analysis shows that 5% petroleum contaminated soils is included in hot or cold mix asphalt concrete can save US$5.00 production cost per ton of asphalt produced. PMID:21909320

  6. Effect of pumping chamber on performance of non-overload centrifugal pump

    Institute of Scientific and Technical Information of China (English)

    谷云庆; 吴登昊; 牟介刚; 蒋兰芳; 代东顺; 施瀚昱; 郑水华

    2015-01-01

    In order to specify the characteristics of un-overloaded centrifugal pumps, the IH100-65-200 pump was chosen as the model pump. Different calculation models for centrifugal pumps were established under different pumping chamber sectional parameters. In the numerical simulation of the centrifugal pumps flow field, the shaft power, head, efficiency, and the changes of the internal flow field under different sectional areas and sectional shapes were studied with the RNGk−εturbulence model, and the influence of the pumping chamber section characteristics of the non-overloaded centrifugal pumps were analyzed. The results show that sectional areas have a significant impact on the non-overload characteristics of centrifugal pumps. The shaft power and head of centrifugal pump are increasing with a lager sectional area, by which the gradient of head curves decreases. The efficiency is improved under a large flow rate condition, but the head and the efficiency are reduced at a small flow rate. It is also observed that the sectional shapes have less influence on the shaft power, the hydraulic performance and flow field characteristics of a centrifugal pump.

  7. Isolation of exosomes by differential centrifugation: Theoretical analysis of a commonly used protocol

    Science.gov (United States)

    Livshts, Mikhail A.; Khomyakova, Elena; Evtushenko, Evgeniy G.; Lazarev, Vassili N.; Kulemin, Nikolay A.; Semina, Svetlana E.; Generozov, Edward V.; Govorun, Vadim M.

    2015-11-01

    Exosomes, small (40-100 nm) extracellular membranous vesicles, attract enormous research interest because they are carriers of disease markers and a prospective delivery system for therapeutic agents. Differential centrifugation, the prevalent method of exosome isolation, frequently produces dissimilar and improper results because of the faulty practice of using a common centrifugation protocol with different rotors. Moreover, as recommended by suppliers, adjusting the centrifugation duration according to rotor K-factors does not work for “fixed-angle” rotors. For both types of rotors - “swinging bucket” and “fixed-angle” - we express the theoretically expected proportion of pelleted vesicles of a given size and the “cut-off” size of completely sedimented vesicles as dependent on the centrifugation force and duration and the sedimentation path-lengths. The proper centrifugation conditions can be selected using relatively simple theoretical estimates of the “cut-off” sizes of vesicles. Experimental verification on exosomes isolated from HT29 cell culture supernatant confirmed the main theoretical statements. Measured by the nanoparticle tracking analysis (NTA) technique, the concentration and size distribution of the vesicles after centrifugation agree with those theoretically expected. To simplify this “cut-off”-size-based adjustment of centrifugation protocol for any rotor, we developed a web-calculator.

  8. Effect of gelatin on the water dispersion and centrifugal purification of single-walled carbon nanotubes

    Science.gov (United States)

    Hanium Maria, Kazi; Mieno, Tetsu

    2016-01-01

    We report a convenient and effective procedure for the water dispersion and purification of single-walled carbon nanotubes (SWNTs). The purification procedure involves a combination of dispersion and centrifugation, in which gelatin; an environmentally friendly material is used as a dispersing agent. It has been found that an aqueous solution of gelatin effectively disperses SWNTs for more than a month. Another advantage of using gelatin as a dispersing agent is that it can be easily removed by washing with water and filtration. The centrifugation procedure employs a centrifugal force of about 2500 times the gravitational force to separate the particles. Although carbonaceous and metallic impurities usually have higher density than SWNTs in arc-produced carbon soot, the centrifugation can easily remove impurities leaving undamaged SWNTs in solution when appropriate centrifugal force and a centrifugation time are used. Centrifugation is carried out for three times to sufficiently remove impurities. Finally, the SWNTs are separated from the gelatin by heating in water and filtering.

  9. Deposition of high-density Au nanoparticles on ITO glass by centrifugation

    International Nuclear Information System (INIS)

    A high and controllable area density Au nanoparticles (NPs) deposition method through centrifugation on indium tin oxide (ITO) is proposed. Area densities as high as 509 NP/µm2 for 10-nm Au NPs and 130 NP/µm2 for 20-nm Au NPs are obtained with relative centrifugal force of 2397 g and larger than 16 min centrifugation time. Using centrifugation method, the Au NP area density can be increased 50 times and 13 times for 10 and 20-nm Au NPs when compared with droplet-only method. A theoretical model is developed to describe the Au NP movement under centrifugation and predict the area density of Au NP on ITO glass. Approximations are applied to derive the analytical expressions for linear and saturation regions. After the beginning of centrifugation, the area density increases linearly with centrifugation time in the initial stage, while the area density gradually saturates when the electrostatic force exerting by the Au NPs on the ITO glass cannot be neglected. Transition phase between the linear and saturated regions is obtained through curve fitting. The model matches well with experimental results in corresponding regions which demonstrate the high-density and cost-effective deposition method for Au NPs on ITO

  10. Deposition of high-density Au nanoparticles on ITO glass by centrifugation

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Dan; Tang, Xiaohong, E-mail: EXHTANG@ntu.edu.sg [Nanyang Technological University, OPTIMUS, Photonics Centre of Excellence, School of Electrical and Electronic Engineering (Singapore); Yoon, Ho Sup [Nanyang Technological University, Division of Structural Biology & Biochemistry, School of Biological Sciences (Singapore)

    2015-04-15

    A high and controllable area density Au nanoparticles (NPs) deposition method through centrifugation on indium tin oxide (ITO) is proposed. Area densities as high as 509 NP/µm{sup 2} for 10-nm Au NPs and 130 NP/µm{sup 2} for 20-nm Au NPs are obtained with relative centrifugal force of 2397 g and larger than 16 min centrifugation time. Using centrifugation method, the Au NP area density can be increased 50 times and 13 times for 10 and 20-nm Au NPs when compared with droplet-only method. A theoretical model is developed to describe the Au NP movement under centrifugation and predict the area density of Au NP on ITO glass. Approximations are applied to derive the analytical expressions for linear and saturation regions. After the beginning of centrifugation, the area density increases linearly with centrifugation time in the initial stage, while the area density gradually saturates when the electrostatic force exerting by the Au NPs on the ITO glass cannot be neglected. Transition phase between the linear and saturated regions is obtained through curve fitting. The model matches well with experimental results in corresponding regions which demonstrate the high-density and cost-effective deposition method for Au NPs on ITO.

  11. Fabrication of silk fibroin film using centrifugal casting technique for corneal tissue engineering.

    Science.gov (United States)

    Lee, Min Chae; Kim, Dong-Kyu; Lee, Ok Joo; Kim, Jung-Ho; Ju, Hyung Woo; Lee, Jung Min; Moon, Bo Mi; Park, Hyun Jung; Kim, Dong Wook; Kim, Su Hyeon; Park, Chan Hum

    2016-04-01

    Films prepared from silk fibroin have shown potential as biomaterials in tissue engineering applications for the eye. Here, we present a novel process for fabrication of silk fibroin films for corneal application. In this work, fabrication of silk fibroin films was simply achieved by centrifugal force. In contrast to the conventional dry casting method, we carried out the new process in a centrifuge with a rotating speed of 4000 rpm, where centrifugal force was imposed on an aluminum tube containing silk fibroin solution. In the present study, we also compared the surface roughness, mechanical properties, transparency, and cell proliferation between centrifugal and dry casting method. In terms of surface morphology, films fabricated by the centrifugal casting have less surface roughness than those by the dry casting. For elasticity and transparency, silk fibroin films obtained from the centrifugal casting had favorable results compared with those prepared by dry casting. Furthermore, primary human corneal keratocytes grew better in films prepared by the centrifugal casting. Therefore, our results suggest that this new fabrication process for silk fibroin films offers important potential benefits for corneal tissue regeneration. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 508-514, 2016. PMID:25939800

  12. Numerical studies in a centrifugal pump with the improved blade considering cavitation

    Science.gov (United States)

    Song, P. F.; Zhang, Y. X.; Xu, C.; Zhou, X.; Zhang, J. Y.

    2015-01-01

    In this paper, a centrifugal pump with the improved blade for cavitation is studied numerically. A 3D impeller with logarithmic spiral blade profile was designed by the in-house hydraulic design code using a centrifugal pump geometric parameters, and the blade profile curve of suction side on the designed impeller is replaced by a combination of tangent line and circle arc line. The cavitation flows in the centrifugal pump with designed impeller, modified impeller and centrifugal pump spectrum impeller are respectively calculated by two-phase CFD simulation at three flow rates. The tests of the centrifugal pump have been conducted to verify numerical simulation. The effects of designed impeller and modified impeller on hydraulic efficiency, critical cavitation number, cavitation length, head drop performance and vapor cavity distribution in impeller are investigated. The results show that the modification of blade profile curve of suction side can improve the cavitation performance of an impeller and hydraulic efficiency of centrifugal pump. Compared with designed impeller, the critical cavitation number of centrifugal pump with modified impeller decrease by 26.5% under the same flow rate coefficient, and the cavitation intensity in the modified impeller is weakened effectively. The hydraulic efficiency of modified impeller also increases by 4.9%.

  13. Effect of Sustained Human Centrifugation on Autonomic Cardiovascular and Vestibular Function

    Science.gov (United States)

    Schlegel, Todd T.; Wood, Scott J.; Brown, Troy E.; Benavides, Edgar W.; Harm, Deborah L.; Rupert, A. H.

    2002-01-01

    Repeated exposure to +Gz enhances human baroreflex responsiveness and improves tolerance to cardiovascular stress. However, both sustained exposure to +Gx and changes in otolith function resulting from the gravitational changes of space flight and parabolic flight may adversely affect autonomic cardiovascular function and orthostatic tolerance. HYPOTHESES: Baroreflex function and orthostatic tolerance are acutely improved by a single sustained (30 min) exposure to +3Gz but not +3Gx. Moreover, after 30 min of +3Gx, any changes that occur in autonomic cardiovascular function will relate commensurately to changes in otolith function. METHODS: Twenty-two healthy human subjects were first exposed to 5 min of +3 Gz centrifugation and then subsequently up to a total of30 min of either +3Gz (n = 15) or +3Gx (n = 7) centrifugation. Tests of autonomic cardiovascular function both before and after both types of centrifugation included: (a) power spectral determinations of beat-to-beat R-R intervals and arterial pressures; (b) carotid-cardiac baroreflex tests; ( c) Valsalva tests; and (d) 30-min head-up tilt (HUT) tests. Otolith function was assessed during centrifugation by the linear vestibulo-ocular reflex and both before and after centrifugation by measurements of ocular counter-rolling and dynamic posturography. RESULTS: All four +3Gz subjects who were intolerant to HUT before centrifugation became tolerant to HUT after centrifugation. The operational point of the carotid-cardiac baroreflex and the Valsalva-related baroreflex were also enhanced in the +3Gz group but not in the +3Gx group. No significant vestibular-autonomic relationships were detected, other than a significant vestibular-cerebrovascular interaction reported previously. CONCLUSIONS: A single, sustained exposure to +3 Gz centrifugation acutely improves baroreflex function and orthostatic tolerance whereas a similar exposure to +3 Gx centrifugation appears to have less effect.

  14. Centrifuge-dewatered mature fine tails : geotechnical observations from a field test

    Energy Technology Data Exchange (ETDEWEB)

    Lahaie, R. [Syncrude Canada Ltd., Fort McMurray, AB (Canada); Seto, J.T.C. [BGC Engineering, Edmonton, AB (Canada)

    2010-07-01

    This paper discussed the field scale test of a centrifuge-dewatering method for treating mature fine tailings (MFT). The method is intended to reduce MFT stockpiles and create a trafficable surface. In centrifuge-dewatering, the MFT is diluted, flocculated, and processed through a centrifuge plant. The resulting cake is taken to a tailings deposit. In the oil sands industry, centrifuges have not yet been used to dewater fluid tailings on a commercial scale. A 6-week trial was undertaken to better comprehend the process of centrifuging MFT and evaluate ways of reclaiming centrifuge-dewatered MFT. Centrifuge cake was produced and deposited in 5 partly contained cells and 2 large culverts, and the deposits were instrumented, sampled, and tested over the course of a year. Centrifugation initially caused the solids content of the MFT to increase from 30 percent to more than 50 percent, and the exposed cell deposits subsequently densified and strengthened as a result of natural desiccation, such as freeze-thaw and evaporative drying. Less than a year after deposition, the resulting solids content exceeded 70 percent, and the undrained shear strength exceeded 15 kilopascals. The cake in the 2 culverts was found to consolidate and strengthen more slowly. A ground-based laser scanning technique was used to survey the deposits in order to measure changes over time. The centrifuge-dewatering process was found to be viable, but in order to meet regulatory mandates, supplementary methods will be needed to further increase the strength gain. 2 refs., 3 tabs., 11 figs.

  15. Study on High-Speed Centrifugal-Regenerative Pump with an Inducer

    Institute of Scientific and Technical Information of China (English)

    朱祖超; 陈鹰; 金庆明; 黄敦回

    2002-01-01

    The study on high-speed centrifugal-regenerative pumps with an inducer (HCRP) is carried out. Thecombined structure of inducer, centrifugal impeller, and regenerative impeller is presented, and a theoretical parallelcombinatorial hydraulic design method is investigated. The comparative experimental results show that efficiency insmaller capacity region, head coefficient and efficiency in larger capacity region of HCRPs is few lower, much higherand lower than those of high-speed centrifugal pumps, respectively, anci that the suction performance of HCRPs isdetermined only by inducer. HCRPs can be more suitably applied to deliver small-capacity high-head liquids inchemical and petrochemical industries.

  16. EXPERIMENTAL STUDY ON HIGH-SPEED CENTRIFUGAL PUMPS WITH DIFFERENT IMPELLERS

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The experimental study is carded out on high-speed centrifugal pumps with three different impellers. The ex-perimental results and analysis show that high-speed centrifugal pumps with a closed complex impeller can achieve thehighest efficiency and the lowest head coefficient followed by those with half-open impeller and open-impeller, and canobtain much easily stable head-capacity characrastic curve, while those with a half-open complex impeller can't. Thecharacteristic curve with a open impeller is almost constant horizontal line before dropping sharply. The results also showthat the axial clearance between pump casing and impeller can influence greatly on the performance of centrifugal pumps.

  17. An assessment of a spiral duct centrifuge using standard and high concentration aerosols

    International Nuclear Information System (INIS)

    The Stoeber spiral duct centrifuge has been calibrated by means of polystyrene latex microspheres for the subsequent measurement of aerosol particle size distributions. Intermediate (1 g m-3) ad high (100 g m-3) sodium chloride aerosol concentrations have been sampled by the centrifuge to determine possible limitations in the equipment. Corrections have to be made for the effect of Coriolis forces, and aerosol concentrations above 1 g m-3 should be diluted before sampling. The spiral duct centrifuge is an extremely versatile instrument for aerosol analysis, and shows a high degree of reliability when operated under well-defined conditions. (author)

  18. AERODYNAMIC STUDIES IN THE STATIC COMPONENTS OF A CENTRIFUGAL COMPRESSOR STAGE

    OpenAIRE

    K.SRINIVASA REDDY; G.V. Ramana Murty; K.V. Sharma

    2011-01-01

    Aerodynamic studies in the static components of a centrifugal compressor stage were conducted using the computational fluid dynamics solver FLUENT. For the simulation study, a typical centrifugal compressor stage geometry with a flow coefficient of 0.053 was chosen, The study is confined to the static components of the centrifugal compressor stage, i.e., the crossover bend (180° U-bend), a radial cascade of return channel vanes, and the exit ducting (90° L-turn). The aerodynamic performance i...

  19. Centrifugal fragmentation of a dinuclear system in the process of its evolution to the compound nucleus

    International Nuclear Information System (INIS)

    The physical content of centrifugal fragmentation is discussed. It is a specific nuclear process which is realized in the evolution of a dinuclear system into a compound nucleus at large angular momenta and large mass asymmetry of the system. The dinuclear system concept which describes the process of the compound nucleus formation in heavy ion reactions predicts the possibility of centrifugal fragmentation. Experimental data giving evidence of the realization of this nuclear process are given. A possible scheme of the centrifugal fragmentation model is discussed

  20. A study of segregation mechanism in centrifugal cast high speed steel rolls

    International Nuclear Information System (INIS)

    Segregation influences the microstructure and performance of high speed steel (HSS) roll. The main reason why segregation occurs in centrifugal cast HSS roll is that atom clusters are formed in HSS melt and such atom clusters have different densities. The high-density atom clusters move to the outer periphery and the low-density atom clusters move to the inner periphery of the roll under centrifugal force. Changing the movement law of atom clusters in the centrifugal force field and increasing the solidification rate of HSS melt can lighten the segregation in HSS roll and improve its performance

  1. Internal Flow Measurement of a Very Low Specific-Speed Centrifugal Pump by PIV

    OpenAIRE

    Choi, Y.-D.; Kurokawa, Junichi; Nishino, K; Matsui, J.; Imamura, H.

    2002-01-01

    As the performance characteristics of a very low specific-speed centrifugal pump are much different from those of a normal specific-speed pump, there is strong demand of full understanding for the internal flow of the very low specific-speed centrifugal pump in order to improve the pump performance. The purpose of this study is to establish a method of visualization by PIV for a very low specific-speed centrifugal pump and to make clear the internal flow characteristics of the pump. Test pump...

  2. Experimental characterization of high speed centrifugal compressor aerodynamic forcing functions

    Science.gov (United States)

    Gallier, Kirk

    The most common and costly unexpected post-development gas turbine engine reliability issue is blade failure due to High Cycle Fatigue (HCF). HCF in centrifugal compressors is a coupled nonlinear fluid-structure problem for which understanding of the phenomenological root causes is incomplete. The complex physics of this problem provides significant challenges for Computational Fluid Dynamics (CFD) techniques. Furthermore, the available literature fails to address the flow field associated with the diffuser potential field, a primary cause of forced impeller vibration. Because of the serious nature of HCF, the inadequacy of current design approaches to predict HCF, and the fundamental lack of benchmark experiments to advance the design practices, there exists a need to build a database of information specific to the nature of the diffuser generated forcing function as a foundation for understanding flow induced blade vibratory failure. The specific aim of this research is to address the fundamental nature of the unsteady aerodynamic interaction phenomena inherent in high-speed centrifugal compressors wherein the impeller exit flow field is dynamically modulated by the vaned diffuser potential field or shock structure. The understanding of this unsteady aerodynamic interaction is fundamental to characterizing the impeller forcing function. Unsteady static pressure measurement at several radial and circumferential locations in the vaneless space offer a depiction of pressure field radial decay, circumferential variation and temporal fluctuation. These pressure measurements are coupled with high density, full field measurement of the velocity field within the diffuser vaneless space at multiple spanwise positions. The velocity field and unsteady pressure field are shown to be intimately linked. A strong momentum gradient exiting the impeller is shown to extend well across the vaneless space and interact with the diffuser vane leading edge. The deterministic unsteady

  3. Oil-free centrifugal hydrogen compression technology demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Heshmat, Hooshang [Mohawk Innovative Technology Inc., Albany, NY (United States)

    2014-05-31

    One of the key elements in realizing a mature market for hydrogen vehicles is the deployment of a safe and efficient hydrogen production and delivery infrastructure on a scale that can compete economically with current fuels. The challenge, however, is that hydrogen, being the lightest and smallest of gases with a lower viscosity and density than natural gas, readily migrates through small spaces and is difficult to compresses efficiently. While efficient and cost effective compression technology is crucial to effective pipeline delivery of hydrogen, the compression methods used currently rely on oil lubricated positive displacement (PD) machines. PD compression technology is very costly, has poor reliability and durability, especially for components subjected to wear (e.g., valves, rider bands and piston rings) and contaminates hydrogen with lubricating fluid. Even so called “oil-free” machines use oil lubricants that migrate into and contaminate the gas path. Due to the poor reliability of PD compressors, current hydrogen producers often install duplicate units in order to maintain on-line times of 98-99%. Such machine redundancy adds substantially to system capital costs. As such, DOE deemed that low capital cost, reliable, efficient and oil-free advanced compressor technologies are needed. MiTi’s solution is a completely oil-free, multi-stage, high-speed, centrifugal compressor designed for flow capacity of 500,000 kg/day with a discharge pressure of 1200 psig. The design employs oil-free compliant foil bearings and seals to allow for very high operating speeds, totally contamination free operation, long life and reliability. This design meets the DOE’s performance targets and achieves an extremely aggressive, specific power metric of 0.48 kW-hr/kg and provides significant improvements in reliability/durability, energy efficiency, sealing and freedom from contamination. The multi-stage compressor system concept has been validated through full scale

  4. Centrifuge modeling of one-step outflow tests for unsaturated parameter estimations

    Directory of Open Access Journals (Sweden)

    H. Nakajima

    2006-05-01

    Full Text Available Centrifuge modeling of one-step outflow tests were carried out using a 2-m radius geotechnical centrifuge, and the cumulative outflow and transient pore pressure were measured during the tests at multiple gravity levels. Based on the scaling law of centrifuge modeling, the measurements generally showed reasonable agreement with prototype data calculated from forward simulations with input parameters determined from standard laboratory tests. The parameter optimizations were examined for three different combinations of input data sets using the test measurements. Within the gravity level examined in this study up to 40 g, the optimized unsaturated parameters compared well when accurate pore pressure measurements were included along with cumulative outflow as input data. The centrifuge modeling technique with its capability to implement variety of instrumentations under well controlled initial and boundary conditions, shortens testing time and can provide significant information for the parameter estimation procedure.

  5. Need, utilization, and configuration of a large, multi-G centrifuge on the Space Station

    Science.gov (United States)

    Bonting, Sjoerd L.

    1987-01-01

    A large, multi-g centrifuge is required on the Space Station (1) to provide valid 1-g controls for the study of zero-g effects on animals and plants and to study readaptation to 1 g; (2) to store animals at 1 g prior to short-term zero-g experimentation; (3) to permit g-level threshold studies of gravity effects. These requirements can be met by a 13-ft-diam., center-mounted centrifuge, on which up to 48 modular habitats with animals (squirrel monkey, rat, mouse) and plants are attached. The advantages of locating this centrifuge with the vivarium, a common environmental control and life support system, a general-purpose work station and storage of food, water, and supplies in an attached short module, are elaborated. Servicing and operation of the centrifuge, as well as minimizing its impact on other Space Station functions are also considered.

  6. Soft magnetic CoNiFe films electrodeposited under centrifugal forces

    International Nuclear Information System (INIS)

    Physical and magnetic properties of soft magnetic CoNiFe films electrodeposited under centrifugal forces were investigated. It was demonstrated that employing an external centrifugal force during the deposition process provides stronger magnetic properties of the soft magnet electrodeposited. Based on the approach proposed, preparation of soft magnetic CoNiFe film with Bs higher than 2.1 T and Hc lower than 1.1 Ωe is possible. For a conventional CoNiFe film with Bs of 1.96 T (electrodeposited under Earth's gravity), the saturation induction can be increased to 2.14 T by applying a 290g centrifugal force during the electrodeposition process, while the Hc approximately remained the same. It is thought that this enhancement provided by an applied centrifugal force is due to the increase of bcc/fcc ratio, where this increase is not associated with a significant crystallite growth in this case

  7. Assessment of parameters of gas centrifuge and separation cascade basing on integral characteristics of separation plant

    International Nuclear Information System (INIS)

    Highlights: • We developed the calculation method to assess a feed flow rate into a gas centrifuge. • It is based on the knowledge of the integral characteristics of a separation plant. • Our method is verified by comparison with the results of the independent one. • The method also allows to specify other features of the separation cascade work. - Abstract: A calculation technique to assess a feed flow rate into a single GC, a total number of centrifuges in a separation cascade and to determine its likely configurations basing on the known integral characteristics of a centrifugal plant is developed. Evaluation of characteristics of the industrial gas centrifuge TC-12 and separation cascades of the NEF plant performed by two independent calculation techniques demonstrates their satisfactory agreement. This methodology would help to some extent the nuclear inspectors in evaluating and assessing the capability of an enrichment facility, and discovering any use for undeclared purposes

  8. Mathematical modeling of mass transfer during centrifugal filtration of polydisperse suspensions

    Energy Technology Data Exchange (ETDEWEB)

    V.F. Pozhidaev; Y.B. Rubinshtein; G.Y. Golberg; S.A. Osadchii [Dahl East Ukraine National University, Lugansk (Ukraine)

    2009-07-15

    A mass-transfer equation, the solution of which for given boundary conditions makes it possible to derive in analytical form a relationship between the extraction of the solid phase of a suspension into the centrifuge effluent and the fineness of the particles, is suggested on the basis of a model; this is of particular importance in connection with the development of a new trend in the utilization of filtering centrifuges - concentration of coal slurries by extraction into the centrifuge effluent of the finest particles, the ash content of which is substantially higher than that of particles of the coarser classes. Results are presented for production studies under conditions at an active establishment (the Neryungrinskaya Enrichment Factory); these results confirmed the adequacy of the mathematical model proposed: convergence of computed and experimental data was within the limits of the experimental error (no more than 3%). The model in question can be used to predict results of suspension separation by centrifugal filtration.

  9. Stability of an exogeneous counter flow toward azimuthal and axisymmetric modes in a centrifuge

    International Nuclear Information System (INIS)

    A centrifuge having a high angular velocity and a revolution symmetry is considered. A counter flow is generated inside it by injecting and extracting gases at four points. The stability of these two parallel fluxes is numerically studied

  10. Effect of Mould Wall Thickness on Rate of Solidification of Centrifugal Casting

    Directory of Open Access Journals (Sweden)

    Madhusudhan

    2010-11-01

    Full Text Available In Centrifugal Casting process the centrifugal force presses the metal against the inner wall of the metal mould, resulting in rapid solidification of the molten metal. However the solidification structures like structural uniformity and structural character of the solidified metal of centrifugal casting is of great importance, regarding to its mechanical properties. The solidification time of the casting is dependent upon the various parameters like speed ofrotation of the mold, mould wall temperature, heat transfer coefficient at the metal-mold interface, mould wall thickness, material of the mould and so on. In this paper experimental study of effect of mould wall thickness on solidification of the centrifugal casting has been discussed. As the mould wall thickness increases, due to the chilling effect, the solidification time decreases. Fine grains are observed in castings produced in thick walled mould and coarse grains are observed in thin walled moulds. Brinel Hardness of the casting was measured.

  11. Characteristics of Fe-28Mn-6Si-5Cr shape memory alloy produced by centrifugal casting

    International Nuclear Information System (INIS)

    Recent application of ferrous shape memory alloys, particularly Fe-Mn-Si alloys as pipe joints used for a tunnel driving technique in the field of civil engineering, requires efficient production of alloy pipes. Centrifugal casting is one of the efficient manufacturing techniques which can produce suitable sizes of pipes of approximately 4 to 14 inches in outside diameter. The mechanical properties of the centrifugally cast Fe-Mn-Si shape memory alloy were investigated to have 700 MPa in tensile strength and shape recovery of ∝3% of the initial deformation. The shape recovery achieved by the centrifugally cast materials proved to be comparable to that of the rolled materials. The TEM microstructure of the centrifugally cast materials deformed necessarily in the process of shape recovery reveals random distribution of ε (hcp) bands containing many dislocations inside, whereas the structure of the rolled materials shows ε phases containing fewer dislocations. (orig.)

  12. On the Effect of Cavitation on the Radial Forces and Hydrodynamic Stiffness of a Centrifugal Pump

    OpenAIRE

    Franz, R. J.; Brennen, C. E.; Acosta, A. J.; Caughey, T. K.

    1986-01-01

    The asymmetric flow within a volute exerts a radial force on a centrifugal impeller. The present paper presents experimental measurements of the radial forces on the impeller in the presence of cavitation.

  13. A test program to measure fluid mechanical whirl-excitation forces in centrifugal pumps

    Science.gov (United States)

    Brennen, C. E.; Acosta, A. J.; Caughey, T. K.

    1980-01-01

    The details of a test program for the measurement of the unsteady forces on centrifugal impellers are discussed. Various hydrodynamic flows are identified as possible contributors to these destabilizing forces.

  14. COOLING METHOD OF SILUMINA CASTINGS AK15M3 AT VERTICAL CENTRIFUGAL CASTING

    OpenAIRE

    V. Yu. Stecenko; K. N. Baranov; A. P. Gutev

    2013-01-01

    The way of cooling of castings from silumin AK15M3 is developed at the vertical centrifugal casting, enabling to receive bimetallic blanks with high-disperse eutectic and hypereutectic microstructures and minimal allowance for machining.

  15. COOLING METHOD OF SILUMINA CASTINGS AK15M3 AT VERTICAL CENTRIFUGAL CASTING

    Directory of Open Access Journals (Sweden)

    V. Yu. Stecenko

    2013-01-01

    Full Text Available The way of cooling of castings from silumin AK15M3 is developed at the vertical centrifugal casting, enabling to receive bimetallic blanks with high-disperse eutectic and hypereutectic microstructures and minimal allowance for machining.

  16. Flow Field of Metallic Fluid Acted by Electromagnetic and Centrifugal Force

    Institute of Scientific and Technical Information of China (English)

    QIU Yi-qing; LUO Zong-an; JIA Guang-lin; LIU Xiang-hua; WANG Guo-dong

    2004-01-01

    According to the principle of electromagnetism and hydrodynamics, a mathematical model of flow field for metallic fluid acted by electromagnetic and centrifugal forces was established. The calculation results showed that the relative velocity between metallic fluid layers rises and the absolute rotational velocity of metallic fluid falls with the increase of magnetic induction intensity. The increase of centrifugal revolution hardly affects the relative velocity between metallic fluid layers, but can enhance the absolute rotational velocity of metallic fluid.

  17. Centrifugal Compressor Performance Deviations with Various Refrigerants, Impeller Sizes and Shaft Speeds

    OpenAIRE

    Wu, Yuanjie; Thilges, Chris

    2014-01-01

    Under the pressure of the Montreal Protocol originally written in 1987, the current popularly used HCFC and HFC refrigerants for comfortable air conditioning, such as low pressure refrigerant R123, will have to be phased out in the near future. This forces companies in centrifugal chiller industry to redesign and retest new centrifugal compressors which can accommodate alternative refrigerants. Keeping the present flow path designs is an economic design process for the alternative refrigerant...

  18. CFD comparison with centrifugal compressor measurements on a wide operating range

    OpenAIRE

    Arnou D.; Fabrie P.; Le Sausse P.; Clunet F.

    2013-01-01

    Centrifugal compressors are widely used in industrial applications thanks to their high efficiency. They are able to provide a wide operating range before reaching the flow barrier or surge limits. Performances and range are described by compressor maps obtained experimentally. After a description of performance test rig, this article compares measured centrifugal compressor performances with computational fluid dynamics results. These computations are performed at steady conditions with R134...

  19. A human gut metaproteomic dataset from stool samples pretreated or not by differential centrifugation

    OpenAIRE

    Alessandro Tanca; Antonio Palomba; Salvatore Pisanu; Maria Filippa Addis; Sergio Uzzau

    2015-01-01

    We present a human gut metaproteomic dataset deposited in the ProteomeXchange Consortium via the PRIDE partner repository with the dataset identifier PXD001573. Ten aliquots of a single stool sample collected from a healthy human volunteer were either pretreated by differential centrifugation (DC; N=5) or not centrifuged (NC; N=5). Protein extracts were then processed by filter-aided sample preparation, single-run liquid chromatography and high-resolution mass spectrometry, and peptide identi...

  20. Modeling on Fluid Flow and Inclusion Motion in Centrifugal Continuous Casting Strands

    Science.gov (United States)

    Wang, Qiangqiang; Zhang, Lifeng; Sridhar, Seetharaman

    2016-08-01

    During the centrifugal continuous casting process, unreasonable casting parameters can cause violent level fluctuation, serious gas entrainment, and formation of frozen shell pieces at the meniscus. Thus, in the current study, a three-dimensional multiphase turbulent model was established to study the transport phenomena during centrifugal continuous casting process. The effects of nozzle position, casting and rotational speed on the flow pattern, centrifugal force acting on the molten steel, level fluctuation, gas entrainment, shear stress on mold wall, and motion of inclusions during centrifugal continuous casting process were investigated. Volume of Fluid model was used to simulate the molten steel-air two-phase. The level fluctuation and the gas entrainment during casting were calculated by user-developed subroutines. The trajectory of inclusions in the rotating system was calculated using the Lagrangian approach. The results show that during centrifugal continuous casting, a large amount of gas was entrained into the molten steel, and broken into bubbles of various sizes. The greater the distance to the mold wall, the smaller the centrifugal force. Rotation speed had the most important influence on the centrifugal force distribution at the side region. Angular moving angle of the nozzle with 8° and keeping the rotation speed with 60 revolutions per minute can somehow stabilize the level fluctuation. The increase of angular angle of nozzle from 8 to 18 deg and rotation speed from 40 to 80 revolutions per minute favored to decrease the total volume of entrained bubbles, while the increase of distance of nozzle moving left and casting speed had reverse effects. The trajectories of inclusions in the mold were irregular, and then rotated along the strand length. After penetrating a certain distance, the inclusions gradually moved to the center of billet and gathered there. More work, such as the heat transfer, the solidification, and the inclusions entrapment

  1. Stall Margin Improvement in a Centrifugal Compressor through Inducer Casing Treatment

    OpenAIRE

    V. V. N. K. Satish Koyyalamudi; Quamber H. Nagpurwala

    2016-01-01

    The increasing trend of high stage pressure ratio with increased aerodynamic loading has led to reduction in stable operating range of centrifugal compressors with stall and surge initiating at relatively higher mass flow rates. The casing treatment technique of stall control is found to be effective in axial compressors, but very limited research work is published on the application of this technique in centrifugal compressors. Present research was aimed to investigate the effect of casing t...

  2. Design and Performance Evaluation of a Very Low Flow Coefficient Centrifugal Compressor

    OpenAIRE

    Yongsheng Wang; Feng Lin; Chaoqun Nie; Abraham Engeda

    2013-01-01

    Very low flow coefficient centrifugal compressors are often applied as the last stages of multistage compressors. Due to the lower volume flow rate, the flow channels in the impeller and diffuser are so narrow that friction loss becomes the main factor, which leads to lower efficiency than that of other stages in the same compressors. In addition, most of design methods are generally based on medium flow coefficient centrifugal compressors. Taking on researches on the low flow coefficient cen...

  3. Performance Analysis of Centrifugal Compressor under Multiple Working Conditions Based on Time-weighted Average

    OpenAIRE

    Zhao, Yuanyang; Xiao, Jun; Li, Liansheng; Yang, Qichao; Liu, Guangbin; Wang, Le; Tang, Bin

    2014-01-01

    A method of compressor performance analysis under multiple working conditions is present based on the Time-weighted average (TWA). The main operation parameters can be obtained based the estimate of the working conditions and times of compressors. Then the comprehensive analysis method can be used to get the overall performance of compressor. The performance of a basic centrifugal compressor was simulation by CFD method in this paper. The overall performance of the centrifugal compressor is c...

  4. Numerical Investigation of the Performance and Flow Behaviour of Centrifugal Compressors

    OpenAIRE

    Wu, Yu Ang

    2014-01-01

    Centrifugal compressor is of great importance in industries. High efficiency, high stage pressure ratio, wide operation range, easy to manufacture and easy to maintain make it prevalent in aerospace, automobile and power generation industries. The possibility in improving its efficiency has been pursued all the way along its path of development. Nowadays, energy-saving has been a key competitiveness for any power-consuming product. Dyson V2 centrifugal compressor is powered by a high speed el...

  5. Optimal Vaneless Diffuser Design For A High-End Centrifugal Compressor

    OpenAIRE

    Ahmed, Noukhez; Asim, Taimoor; Mishra, Rakesh; Sivagnanasundaram, Subenuka; Eynon, Paul

    2015-01-01

    Turbochargers are widely used in the automotive industry to reduce engine emissions and to increase the power. Centrifugal compressors are an integral part of turbochargers. Centrifugal compressors comprises primarily of inducer, impeller, diffuser and volute. The diffuser has an important role in the isentropic efficiency of the compressor. Over the past few decades, researchers have been trying to increase the total-to-total compressor stage efficiency by altering the diffuser’s geometries....

  6. Performance Improvement of a Return Channel in a Multistage Centrifugal Compressor Using Multiobjective Optimization

    OpenAIRE

    Nishida, Yoshifumi; Kobayashi, Hiromi; Nishida, Hideo; Sugimura, Kazuyuki

    2013-01-01

    The effect of the design parameters of a return channel on the performance of a multistage centrifugal compressor was numerically investigated, and the shape of the return channel was optimized using a multiobjective optimization method based on a genetic algorithm to improve the performance of the centrifugal compressor. The results of sensitivity analysis using Latin hypercube sampling suggested that the inlet-to-outlet area ratio of the return vane affected the total pressure loss in the r...

  7. Effect of 30-min +3 Gz centrifugation on vestibular and autonomic cardiovascular function

    Science.gov (United States)

    Schlegel, Todd T.; Wood, Scott J.; Brown, Troy E.; Harm, Deborah L.; Rupert, A. H.

    2003-01-01

    INTRODUCTION: Repeated exposure to increased +Gz enhances human baroreflex responsiveness and improves tolerance to cardiovascular stress. However, it is not known whether such enhancements might also result from a single, more prolonged exposure to increased +Gz. Our study was designed to investigate whether baroreflex function and orthostatic tolerance are acutely improved by a single prolonged exposure to +3 Gz, and moreover, whether changes in autonomic cardiovascular function resulting from exposure to increased +Gz are correlated with changes in otolith function. METHODS: We exposed 15 healthy human subjects to +3 Gz centrifugation for up to 30 min or until symptoms of incipient G-induced loss of consciousness (G-LOC) ensued. Tests of autonomic cardiovascular function both before and after centrifugation included: 1) power spectral determinations of beat-to-beat R-R intervals and arterial pressures; 2) carotid-cardiac baroreflex tests; 3) Valsalva tests; and 4) 30-min head-up tilt tests. Otolith function was assessed during centrifugation by the linear vestibulo-ocular reflex and both before and after centrifugation by measurements of ocular counter-rolling and dynamic posturography. RESULTS: Of the 15 subjects who underwent prolonged +3 Gz, 4 were intolerant to 30 min of head-up tilt before centrifugation but became tolerant to such tilt after centrifugation. The Valsalva-related baroreflex as well as a measure of the carotid-cardiac baroreflex were also enhanced after centrifugation. No significant vestibular-autonomic relationships were detected beyond a vestibular-cerebrovascular interaction reported earlier in a subset of seven participants. CONCLUSIONS: A single prolonged exposure to +3 Gz centrifugation acutely improves baroreflex function and orthostatic tolerance.

  8. DESIGN AND DYNAMICAL SIMULATION TO NEW VIBRATING CENTRIFUGE WITH WIDER FREQUENCY RANGE

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A new type of vibrating centrifuge with wider frequency range is designed instead of the traditional one with a single frequency to improve the vibrating effect. With the aid of a new dynamical model, one simulation without considering the visco-elasticity of basis is presented, then the dynamical responses of time and frequency in different scheme are given. The computational results show that the improved vibrating centrifuge possesses a remarkably widened frequency range.

  9. Investigation of Flash Flotation Technology Utilizing Centrifugal Forces and Novel Sparging Methods

    OpenAIRE

    Rowley, Dylan Mark

    2014-01-01

    A new processing technique, centrifugal flotation, has been developed in recent research projects to overcome the large residence times and fine particle limitations of traditional flotation technologies. The major innovation in the area of centrifugal flotation is the Air Sparged Hydrocyclone (ASH), which has proven capabilities in achieving quality products at specific capacities greater than traditional flotation methods. However, the ASH technology ultimately suffers from sparger plugging...

  10. MR Continuously Variable Transmission Driven by SMA for Centrifugal Fan in Nuclear Power Plant

    OpenAIRE

    Jianzuo Ma; Hongyu Shu; Jin Huang

    2012-01-01

    The running efficiency of centrifugal fan affects the economical efficiency of the ventilation system. In this paper, we proposed a continuously variable transmission system based on magnetorheological fluid and shape memory alloy for improving the operating efficiency of the centrifugal fan. The equation of transmission torque developed by magnetorheological fluid is derived to compute the torque transmission ability in the continuously variable transmission system. A shape memory alloy spri...

  11. The Optimal Hydraulic Design of Centrifugal Impeller Using Genetic Algorithm with BVF

    OpenAIRE

    Xin Zhou; Yongxue Zhang; Zhongli Ji; Hucan Hou

    2014-01-01

    Derived from idea of combining the advantages of two-dimensional hydraulic design theory, genetic algorithm, and boundary vorticity flux diagnosis, an optimal hydraulic design method of centrifugal pump impeller was developed. Given design parameters, the desired optimal centrifugal impeller can be obtained after several iterations by this method. Another 5 impellers with the same parameters were also designed by using single arc, double arcs, triple arcs, logarithmic spiral, and linear-varia...

  12. Numerical Optimization of Impeller for Backward-Curved Centrifugal Fan by Response Surface Methodology (RSM)

    OpenAIRE

    Fannian Meng; Quanlin Dong; Yan Wang; Pengfei Wang; Chunxi Zhang

    2013-01-01

    A numerical optimum study on three-dimensional unsteady viscous flow in a centrifugal fan with backward-curved blades was performed. The influence of the inlet angle, the outlet blade angle and blade number on aerodynamic performance of the centrifugal fan was analyzed concerning the whole impeller-volute configuration. Response Surface Methodology (RSM) based on a three-level, three -variable Box-Behnken Design (BBD) was used to evaluate the interactive effects of factors such as inlet blade...

  13. Experimental Investigation on Centrifugal Compressor Blade Crack Classification Using the Squared Envelope Spectrum

    OpenAIRE

    Xuefeng Zhang; Hongkun Li; Fujian Xu

    2013-01-01

    Centrifugal compressors are a key piece of equipment for modern production. Among the components of the centrifugal compressor, the impeller is a pivotal part as it is used to transform kinetic energy into pressure energy. Blade crack condition monitoring and classification has been broadly investigated in the industrial and academic area. In this research, a pressure pulsation (PP) sensor arranged in close vicinity to the crack area and the corresponding casing vibration signals are used to ...

  14. Effect of Rotor–Stator Interaction on Impeller Performance in Centrifugal Compressors

    OpenAIRE

    Sato, K.; He, L.

    1999-01-01

    A 3-D unsteady thin-layer Navier-Stokes code has been used to calculate the flow through a centrifugal compressor stage. The validation of the code for steady flows in centrifugal compressors was conducted for the Krain’s impeller with a vaneless diffuser as a test case and the numerical results were compared with the experimental results. The predicted flow field and performance agreed well with the experimental data. An unsteady stage solution was then conducted with this impeller followed ...

  15. EXPERIMENTAL INVESTIGATION OF FLOW INSTABILITIES AND ROTATING STALL IN A HIGH-ENERGY CENTRIFUGAL PUMP STAGE

    OpenAIRE

    Berten, Stefan; Dupont, Philippe; Fabre, Laurent; Kayal, Maher; Avellan, Francois; Farhat, Mohamed

    2009-01-01

    In centrifugal pumps, the interaction between the rotating impeller and the stationary diffuser generates specific pressure fluctuation patterns. When the pump is operated at off design conditions, these pressure fluctuations increase. The resulting rise of mechanical vibration levels may negatively affect the operational performance and the life span of mechanical components. This paper presents detailed pressure fluctuation measurements performed in a high speed centrifugal pump...

  16. Numerical identification of blade exit angle effect on the performance for a multistage centrifugal pump impeller

    OpenAIRE

    Babayigit Osman; Kocaaslan Osman; Aksoy Muharrem Hilmi; Guleren Kursad Melih; Ozgoren Muammer

    2015-01-01

    Nowadays, single and multistage centrifugal pumps are widely used in industrial and mining enterprises. One of the most important components of a centrifugal pump is the impeller. The performance characteristics are related to the pump comprising the head and the overall efficiency rely a great deal on the impeller geometry. In this work, effects of blade exit angle change on hydraulic efficiency of a multi stage pump impeller are investigated via Ansys-Fluent computational fluid dynamics sof...

  17. A scale-down mimic for mapping the process performance of centrifugation, depth and sterile filtration

    OpenAIRE

    Joseph, A; Kenty, B.; Mollet, M.; Hwang, K.; S Rose; Goldrick, S.; Bender, J; Farid, S. S.; Titchener-Hooker, N.

    2016-01-01

    In the production of biopharmaceuticals disk-stack centrifugation is widely used as a harvest step for the removal of cells and cellular debris. Depth filters followed by sterile filters are often then employed to remove residual solids remaining in the centrate. Process development of centrifugation is usually conducted at pilot-scale so as to mimic the commercial scale equipment but this method requires large quantities of cell culture and significant levels of effort for successful charact...

  18. Solidified structure of thin-walled titanium parts by vertical centrifugal casting

    OpenAIRE

    Wu Shiping; Xu Qin; Zhang Jun

    2011-01-01

    The solidified structure of the thin-walled and complicated Ti-6Al-4V castings produced by the vertical centrifugal casting process was studied in the present work. The results show that the wall thickness of the section is featured with homogeneously distributed fine equiaxial grains, compared with the microstructure of the thick-walled section. The grain size of the castings has a tendency to decrease gradually with the increasing of the centrifugal radius. The inter-lamellar space in thick...

  19. RESEARCH OF MECHANICAL PROPERTY GRADIENT DISTRIBUTION OF Al-Cu ALLOY IN CENTRIFUGAL CASTING

    OpenAIRE

    ZHI SUN; YANWEI SUI; AIHUI LIU; BANGSHENG LI; JINGJIE GUO

    2011-01-01

    Al-Cu alloy castings are obtained using centrifugal casting. The regularity of mechanical property gradient distribution of Al-Cu alloy castings with the same centrifugal radius at different positions is investigated. The result shows that the tensile strength, yield strength, elongation and microscope hardness exhibit the following gradient distribution characteristic — high on both sides and low on the center. The trend of mechanical property gradient distribution of Al-Cu alloy increases w...

  20. Effect of quenching temperature on structure and properties of centrifugal casting high speed steel roll

    OpenAIRE

    Fu Hanguang; Cheng Xiaole; Du Zhongze

    2009-01-01

    The critical points and time-temperature-transformation (TTT) curves of the isothermal transformation diagrams for a high-speed steel casting on a horizontal centrifugal casting machine had been determined experimentally in the study. The effects of quenching temperature on the microstructures and properties of centrifugal casting high speed steel (HSS) roll has been investigated using scanning electron microscopy (SEM), light optical microscopy (LOM) and X-ray diffraction (XRD) as well as us...