WorldWideScience

Sample records for central station ingeniero

  1. Overhaul of the generator of the hydroelectric central station Ingeniero Carlos Ramirez Ulloa; Rehabilitacion del generador de la unidad 2 de la central hidroelectrica ingeniero Carlos Ramirez Ulloa

    Energy Technology Data Exchange (ETDEWEB)

    Robles Pimentel, Edgar [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Garcia Hernandez, Javier [Comision Federal de Electricidad, Mexico, D. F. (Mexico)

    1997-12-31

    In November 1995, the failure of the Unit 2 generator at the hydroelectric central station Ingeniero Carlos Ramirez Ulloa, El Caracol, occurred. The accident forced to carry out its overhaul. Here are presented the technical problems faced during the overhaul of the generator and analyzed the implemented solutions. [Espanol] En noviembre de 1995 ocurrio la falla del generador de la unidad 2 de la central hidroelectrica Ing. Carlos Ramirez Ulloa, El Caracol. El accidente obligo a llevar a cabo su rehabilitacion. Se presentan los problemas tecnicos enfrentados durante la rehabilitacion del generador y se discuten las soluciones implementadas.

  2. Central Station Design Options

    DEFF Research Database (Denmark)

    2011-01-01

    The purpose of EDISON Work Package 4.1 is the evaluation of possible Central (charging) Stations design options for making possible the public charging of Electric Vehicles (EVs). A number of scenarios for EVs are assessed, with special emphasis on the options of Fast Charging and Battery Swapping....... The work identifies the architecture, sizing and siting of prospective Central Stations in Denmark, which can be located at shopping centers, large car parking lots or gas stations. Central Stations are planned to be integrated in the Danish distribution grid. The Danish island of Bornholm, where a high.......g. due to vandalism, the charge supply circuit is disconnected. More electrical vehicles on the market are capable today of quick charging up to 50 kW power level. The feasibility of Central Stations with fast charging/swapping option, their capacity, design, costs and grid impact, as well as battery...

  3. "Central Station" Londonis

    Index Scriptorium Estoniae

    2000-01-01

    Londoni galeriis Milch seitsme läti, leedu ja eesti kunstniku projekt "Central Station". Kuraatorid Lisa Panting, Sally Tallant. Eestist osalevad Hanno Soans (Catarina Campinoga koostöös valminud video), Kiwa, Kai Kaljo

  4. Central station market development strategies for photovoltaics

    Science.gov (United States)

    1980-01-01

    Federal market development strategies designed to accelerate the market penetration of central station applications of photovoltaic energy system are analyzed. Since no specific goals were set for the commercialization of central station applications, strategic principles are explored which, when coupled with specific objectives for central stations, can produce a market development implementation plan. The study includes (1) background information on the National Photovoltaic Program, photovoltaic technology, and central stations; (2) a brief market assessment; (3) a discussion of the viewpoints of the electric utility industry with respect to solar energy; (4) a discussion of commercialization issues; and (5) strategy principles. It is recommended that a set of specific goals and objectives be defined for the photovoltaic central station program, and that these goals and objectives evolve into an implementation plan that identifies the appropriate federal role.

  5. Central station market development strategies for photovoltaics

    Science.gov (United States)

    1980-11-01

    Federal market development strategies designed to accelerate the market penetration of central station applications of photovoltaic energy system are analyzed. Since no specific goals were set for the commercialization of central station applications, strategic principles are explored which, when coupled with specific objectives for central stations, can produce a market development implementation plan. The study includes (1) background information on the National Photovoltaic Program, photovoltaic technology, and central stations; (2) a brief market assessment; (3) a discussion of the viewpoints of the electric utility industry with respect to solar energy; (4) a discussion of commercialization issues; and (5) strategy principles. It is recommended that a set of specific goals and objectives be defined for the photovoltaic central station program, and that these goals and objectives evolve into an implementation plan that identifies the appropriate federal role.

  6. Central Station DHC Phase 1 feasibility

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, H.L.

    1992-03-01

    This project assisted a private real estate developer in technically assessing the feasibility of integrating a central DHC system into a proposed 72 acre area mixed-use Planned Development (Central Station) just south of the Chicago Central Business District (Loop). The technical assessment concluded that a district heating and cooling system for Central Station will be feasible, provided that a major anchor load can be connected to the system. The system conceived for the site employs a modular approach that adjusts production capacity to actual load growth. The design concept includes gas-fired boilers for heating, gas turbine driven chillers for base loading, electric motor driven chillers for peaking, steam turbines for peak power and back pressure operation, and chilled water storage. Energy will be supplied to the users in the form of steam or low temperature hot water for heating, and low temperature chilled water for cooling.

  7. El Ingeniero desde el concepto de servicio

    OpenAIRE

    Elias Fusté, Antonio; Torres Torres, Francisco

    1998-01-01

    Las exigencias actuales del entorno laboral hacen que el periodo de formación de un ingeniero no acabe con la obtención de su título, sino que continúe de forma muy importante a lo largo de toda su vida profesional. La profesionalización de la docencia en todos sus niveles hace patente que la formación de carácter científico-técnico tenga que ser complementada con conocimientos de tipo social y gerencial, dando lugar a la llamada formación integral del ingeniero. Un punto de vista muy útil a ...

  8. EL PRESENTE Y FUTURO DE LOS INGENIEROS

    Directory of Open Access Journals (Sweden)

    Zorrilla Gascón, Miguel Ángel

    2014-05-01

    Full Text Available Hoy en día, la tasa de desempleo del ingeniero español es mucho más elevada de lo deseado, y ha provocado que muchos de nosotros nos hayamos tenido que especializar a edades “avanzadas” o reinventar o simplemente cambiar de actividad profesional.

  9. Design of photovoltaic central power station concentrator array

    Energy Technology Data Exchange (ETDEWEB)

    1984-02-01

    A design for a photovoltaic central power station using tracking concentrators has been developed. The 100 MW plant is assumed to be located adjacent to the Saguaro Power Station of Arizona Public Service. The design assumes an advanced Martin Marietta two-axis tracking fresnel lens concentrator. The concentrators are arrayed in 5 MW subfields, each with its own power conditioning unit. The photovoltaic plant output is connected to the existing 115 kV switchyard. The site specific design allows detailed cost estimates for engineering, site preparation, and installation. Collector and power conditioning costs have been treated parametrically.

  10. Benchmarking: retos y riesgos para el ingeniero industrial

    Directory of Open Access Journals (Sweden)

    Sergio Humberto Romo Picazo

    2000-01-01

    Full Text Available Los métodos para el análisis y solución de problemas que tradicionalmente ha usado el ingeniero industrial pueden adoptar un enfoque distinto, usando el concepto de benchmarking. El benchmarking representa una herramienta muy importante para los ingenieros industriales, ya que bien aplicada conduce al mejoramiento de los procesos. Sin embargo, todo ingeniero industrial debe conocer las limitaciones y riesgos que implica la decisión de llevar a cabo un proyecto de benchmarking, aquí se señalan algunos de ellos.

  11. Mini Neutron Monitors at Concordia Research Station, Central Antarctica

    Science.gov (United States)

    Poluianov, Stepan; Usoskin, Ilya; Mishev, Alexander; Moraal, Harm; Kruger, Helena; Casasanta, Giampietro; Traversi, Rita; Udisti, Roberto

    2015-12-01

    Two mini neutron monitors are installed at Concordia research station (Dome C, Central Antarctica, 75° 06' S, 123° 23' E, 3,233 m.a.s.l.). The site has unique properties ideal for cosmic ray measurements, especially for the detection of solar energetic particles: very low cutoff rigidity acceptance cones pointing to geographical latitudes > 75° S. The instruments consist of a standard neutron monitor and a "bare" (lead-free) neutron monitor. The instrument operation started in mid-January 2015. The barometric correction coefficients were computed for the period from 1 February to 31 July 2015. Several interesting events, including two notable Forbush decreases on 17 March 2015 and 22 June 2015, and a solar particle event of 29 October 2015 were registered. The data sets are available at cosmicrays.oulu.fi and nmdb.eu.

  12. The central monitoring station of Indian Environmental Radiation Monitoring Network (IERMON): the architecture and functions

    International Nuclear Information System (INIS)

    The Indian Environmental Radiation Monitoring Network (IERMON) is being established across the country by the Bhabha Atomic Research Centre, Mumbai. The network consists of stations with automated systems for environmental radiation monitoring with online data communication facility. Currently about 100 stations are operational and additional 500 stations are expected to be installed by March, 2012. The network is established with different objectives, the main objective being the detection and reporting of any nuclear emergency anywhere in the country. The central monitoring station of the network is established in Mumbai. This paper describes the architecture and functions of IERMON Central Station. The Central Station consists of server room for online data collection from remote stations and maintenance of databases for various applications; central monitoring room for user interaction with database and IERMON website maintenance and development room for the development of new applications. The functions of IERMON Central Station include detection and reporting of nuclear emergency, maintenance of remote stations, enhancement of public awareness on environmental radiation through public display systems and website, etc. The details on system layout and data protocols can be found in the paper. (author)

  13. Mecánica de medios continuos para ingenieros

    OpenAIRE

    Oliver Olivella, Xavier; Agelet de Saracibar Bosch, Carlos

    2002-01-01

    Mecánica de medios continuos para ingenieros pretende ser una herramienta para la formación de los ingenieros en la mecánica de medios continuos, que mantiene un equilibrio adecuado entre la rigurosidad de su planteamiento y la claridad de los principios físicos tratados. El contenido del texto está claramente dividido en dos partes, que se presentan secuencialmente. En la primera (capítulos 1 a 5), se introducen los aspectos fundamentales y descriptivos comunes a todos los medios continu...

  14. Space Station Environmental Control and Life Support System architecture - Centralized versus distributed

    Science.gov (United States)

    Boehm, A. M.; Behrend, A. F.

    1984-01-01

    Both Centralized and Distributed approaches are being evaluated for the installation of Environmental Control and Life Support (ECLS) equipment in the Space Station. In the Centralized facility concept, integrated processing equipment is located in two modules with plumbing used to circulate ECLS services throughout the Station. The Distributed approach locates the ECLS subsystems in every module of the Space Station with each subsystem designed to meet its own module needs. This paper defines the two approaches and how the advantages and disadvantages of each are tied to the choice of Space Station architecture. Other considerations and evaluations include: crew movement, Station evolution and the ducting impact needed to circulate ECLS services from centrally located processing equipment.

  15. El Ingeniero Agrícola en la Agroindustria

    Directory of Open Access Journals (Sweden)

    Ramos Sarria Ramiro

    1985-12-01

    Full Text Available En este artículo se da a conocer la capacidad técnica y administrativa que posee el Ingeniero Agrícola, para organizar un sistema coherente que logre definir, planificar y promover una política de desarrollo científico y tecnológico en la agroindustria.

  16. The Staffing of Central Electricity Generating Board Nuclear Power Stations

    International Nuclear Information System (INIS)

    An account is given of the staffing requirements and organization at a CEBG nuclear power station. The training of staff and licensing requirements for reactoroperating staff are discussed. Experience gained to data of the outcome of pre-operating training and detailed planning in the operational sphere is given. (author)

  17. The ANSS Station Information System: A Centralized Station Metadata Repository for Populating, Managing and Distributing Seismic Station Metadata

    Science.gov (United States)

    Thomas, V. I.; Yu, E.; Acharya, P.; Jaramillo, J.; Chowdhury, F.

    2015-12-01

    Maintaining and archiving accurate site metadata is critical for seismic network operations. The Advanced National Seismic System (ANSS) Station Information System (SIS) is a repository of seismic network field equipment, equipment response, and other site information. Currently, there are 187 different sensor models and 114 data-logger models in SIS. SIS has a web-based user interface that allows network operators to enter information about seismic equipment and assign response parameters to it. It allows users to log entries for sites, equipment, and data streams. Users can also track when equipment is installed, updated, and/or removed from sites. When seismic equipment configurations change for a site, SIS computes the overall gain of a data channel by combining the response parameters of the underlying hardware components. Users can then distribute this metadata in standardized formats such as FDSN StationXML or dataless SEED. One powerful advantage of SIS is that existing data in the repository can be leveraged: e.g., new instruments can be assigned response parameters from the Incorporated Research Institutions for Seismology (IRIS) Nominal Response Library (NRL), or from a similar instrument already in the inventory, thereby reducing the amount of time needed to determine parameters when new equipment (or models) are introduced into a network. SIS is also useful for managing field equipment that does not produce seismic data (eg power systems, telemetry devices or GPS receivers) and gives the network operator a comprehensive view of site field work. SIS allows users to generate field logs to document activities and inventory at sites. Thus, operators can also use SIS reporting capabilities to improve planning and maintenance of the network. Queries such as how many sensors of a certain model are installed or what pieces of equipment have active problem reports are just a few examples of the type of information that is available to SIS users.

  18. El Título de Ingeniero Agrónomo

    Directory of Open Access Journals (Sweden)

    Universidad Nacional de Colombia Facultad de Agronomía

    1941-08-01

    Full Text Available Como es ocurrencia frecuente la controversia sobre la propiedad académica o el derecho que asiste a los profesionales que han cursado estudios superiores de Agronomía para usar el título de Ingenieros Agrónomos, es procedente aclarar este punto sobre todo hoy que en Colombia la carrera agronómica está ocupando destacada posición en el panorama social y económico del país.

  19. Dos cubiertas del ingeniero Heinz Hossdorf, Suiza

    Directory of Open Access Journals (Sweden)

    Editorial, Equipo

    1966-07-01

    Full Text Available I. Reading hall of the Bale University Library Otto H. Senn, architect The roof of the central hall is the most outstanding feature, and consists of six hyperbolic paraboloidal thin shells, placed along a ring. They transmit the thrusts to a prestressed outer hoop, which is part of the intermediate reading gallery. This hoop is connected with the rest of the gallery structure by means of a metallic triangulated structure. 2. Public hall of the «Rudolf Steiner» School at Bale H. F. Leu, architect In this original constructional design the end public stand of the hall cantilevers over ¿he lower platform, and also serves as support for the polyhedrical roof; this consists of reinforced concrete slabs, 12 cm in thickness. There is a perimetral hoop and reinforcing ribs, which help to transmit most of the load to the springers of the overhanging structure.1. Sala de lectura de la Biblioteca de la Universidad de Basilea La cubierta del espacio central, que es la más interesante, se compone de seis paraboloides hiperbólicos—definidos por estructuras laminares—, en disposición radial, los cuales transmiten sus empujes a un anillo pretensado de borde, que constituye la cubierta de la galería intermedia. Dicho anillo se enlaza con el borde de la galería por medio de una estructura triangulada metálica. 2. Salón de actos de la Escuela "Rudolf Steiner" en Basilea Esta original solución constructiva es consecuencia de que la tribuna de fondo vuela en ménsula sobre la planta inferior, sirviendo, a la vez, de apoyo para la cubierta poliédrica, constituida por placas de hormigón armado de 12 cm de espesor. Se han organizado el zuncho perimetral y los nervios de refuerzo, de forma que la mayor parte de la carga se transmita a las esquinas de arranque del cuerpo volado.

  20. Dos cubiertas del ingeniero Heinz Hossdorf (Suiza

    Directory of Open Access Journals (Sweden)

    Editorial, Equipo

    1966-09-01

    Full Text Available Cement factories at Liesberg Burckhardt, architect The roof shells of the roof of this factory are noteworthy because they are fitted with a minimum sized hoop ring, and with an additional tie member. Tensioning has been carried out by a special procedure, from the centre of the shell. Laboratory for the Secheron Factory M. & W. Rohner; P. Schatt & O. Trottmann, architects The outstanding structural feature of this factory is a main concrete girder, built in situ, from which prestressed ribs branch off every 2.50 m. At the end of these ribs metal tie hangers support part of the enclosing factory walls.Fábrica de Cemento en Líesberg Las láminas de esta cubierta se caracterizan por tener el anillo de borde en forma de arco de sección mínima, con un tirante auxiliar, y por el sistema de tesado, realizado desde el centro de la lámina por un procedimiento especial. Laboratorio para la Fábrica Secheron Consta, fundamentalmente, de una viga central hormigonada «in situ» de la que parten, cada 3,5 m, unos nervios pretensados, cuyos extremos se cuelgan, mediante tirantes metálicos, los elementos que constituyen los apoyos de la fachada.

  1. Design of a photovoltaic central power station: flat-plate array

    Energy Technology Data Exchange (ETDEWEB)

    1984-02-01

    A design for a photovoltaic central power station using fixed flat-panel arrays has been developed. The 100 MW plant is assumed to be located adjacent to the Saguaro Power Station of Arizona Public Service. The design assumes high-efficiency photovoltaic modules using dendritic web cells. The modules are arranged in 5 MW subfields, each with its own power conditioning unit. The photovoltaic output is connected to the existing 115 kV utility switchyard. The site specific design allows detailed cost estimates for engineering, site preparation, and installation. Collector and power conditioning costs have been treated parametrically.

  2. Crustal thickness in central Europe from single-station seismic noise autocorrelation analysis

    Science.gov (United States)

    Becker, Gesa; Knapmeyer-Endrun, Brigitte

    2016-04-01

    The InSight mission to Mars will place a single three-component seismometer on the planet's surface, requiring the application of single-station methods. In addition, seismicity on Mars is likely less abundant than on Earth, making it important to also use the available seismic noise. For these reasons different approaches of seismic noise autocorrelation have been tested with broadband three-component datasets from 12 stations across central Europe. These stations cover varying Moho depths of ca. 25-50 km depth. With the help of the autocorrelations, reflected body waves are extracted in order to estimate the crustal thickness at each station. This is of special relevance for Mars, where average crustal thickness is uncertain by a factor of two. The different approaches used are waterlevel normalized autocorrelation, with and without application of a short-term and long-term average filter to the spectrum of the data prior to autocorrelation, and phase autocorrelation. These approaches are compared and analyzed. Estimates for the Moho depths are made from the lag times of the reflected P-waves and compared to available Moho depth values at the stations. Due to the availability of three-component data these estimates can be cross-validated and in some cases not only P-wave reflections, but also possible S-wave and multiple reflections can be identified. The estimates compare well with the general trend of Moho depth expected for these stations. The consistency of results is further investigated by comparing different stations of the GERES array (aperture 2 km), which also allows to examine results for closely located broad-band and short-period stations side by side.

  3. Shadowing on Apollo 12 Solar Cells and Possible Movement of the ALSEP Central Station

    Science.gov (United States)

    Berman, Paul A.; Williams, David R.

    2014-01-01

    A fortuitous arrangement of a west-facing solar cell and a bracket on the Apollo 12 ALSEP (Apollo Lunar Surface Experiments Package) has allowed us to precisely determine the relative position of the Sun near sunset relative to the Apollo 12 central station over a period of nearly 8 years. The small bracket, mounted on the central station due west of the cell, casts a shadow on the cell near sunset, decreasing the output of the cell proportional to the area of shadow covering the cell. The pattern of shadowing by the bracket gives good agreement with the known change of solar azimuth on a yearly timescale, but the pattern gradually but constantly changed from year-to-year, in a manner inconsistent with the known and changing position of the Sun.

  4. Frequency selection module in composition the central station of reception and transmission multimedia information

    Directory of Open Access Journals (Sweden)

    G. A. Mirskikh

    2011-10-01

    Full Text Available The knot is incomposition the keystation of reception and transmission signals of ether television, radiosignals and multimedia information is presented in the article. The module of frequencyselection is intended for filtration and division of power of signal between eight users. Thecomplete set from sixteen modules of frequency selection is used In the central station. Thebasic frequency parameters of filters of intermediate-frequency and topology of microstripcoplanaricdivizor on the basis of double circular divizors are presented in the article

  5. Generating power stations and optimization energetic of processes; Centrales generadoras y optimacion energetica de procesos

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez Ramirez, Ranulfo; Fernandez Montiel, Manuel Francisco [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    1999-07-01

    Some recent experiences of the Management of Thermal Processes of the Instituto de Investigaciones Electricas (IIE) related to the works on generating power stations of electricity, plants of cogeneration and energy saving are presented. [Spanish] Se presentan algunas experiencias recientes de la Gerencia de Procesos Termicos del Instituto de Investigaciones Electricas (IIE) relacionadas con los trabajos sobre centrales generadoras de electricidad, plantas de cogeneracion y ahorro de energia.

  6. Recent temperature trends at mountain stations on the southern slope of the central Himalayas

    Indian Academy of Sciences (India)

    Dambaru Ballab Kattel; Tandong Yao

    2013-02-01

    Insufficient long-term in situ observations and complex topographic conditions pose major problems in quantifying the magnitude of climatic trends in mountainous regions such as Nepal. Presented here is three decades (1980–2009) of data on annual maximum, minimum and average temperature trends from 13 mountain stations on the southern slope of the central Himalayas. The stations are located at elevations between 1304 and 2566 m above sea level and with varied topography. Spatial analyses of the average temperature trend show warming in most of the stations. The magnitude of warming is higher for maximum temperatures, while minimum temperatures exhibit larger variability such as positive, negative or no change. These results are consistent with patterns reported in some parts of the Indian subcontinent and Upper Indus Basin, but different from conditions on the Tibetan Plateau (China), where the warming of minimum temperatures is more prominent than that of the maximum temperatures. From the temporal variations, a dramatic increase in temperature is observed in the latest decade, particularly in the average and maximum temperatures. The results from the cumulative sum chart analyses suggest that the thermal regime shifted in 1997. The dramatic enhancement of average temperature in the last decade is strongly consistent with the result of contemporary studies of the surrounding regions, where warming is attributed to an increase in anthropogenic greenhouse gases. However, as in the western Himalayas and the Upper Indus Basin, the mountain stations on the southern slope of the central Himalayas show variability in temperature trends, particularly for the minimum temperature. This inhomogeneous trend is likely ascribed to the differences in topography and microclimatic regime of the observed stations.

  7. Organization and management of building-site of central station on high-speed line Madrid-Barcelona French border.

    OpenAIRE

    Garcia Puig, Manel

    2009-01-01

    The thesis is about the organization and management of a construction site. The original project is the construction of the Central Station, high-speed line Madrid- Barcelona-French border. Because of the magnitude of the work, has been determined to split the building site into two phases. In a first phase, carrying out the works relating to access to the station and car park, in a second phase, the works related to the railway station and the platform. In the following ...

  8. Solar lanterns for domestic lighting in India: Viability of central charging station model

    Energy Technology Data Exchange (ETDEWEB)

    Chaurey, A., E-mail: akanksha@teri.res.i [TERI, Darbari Seth Block, Habitat Place, Lodhi Road, New Delhi 110003 (India); Kandpal, T.C., E-mail: tarak@ces.iitd.ernet.i [Centre for Energy Studies, Indian Institute of Technology, Hauz Khas, New Delhi 110016 (India)

    2009-11-15

    About 68 million households in India rely on kerosene as a fuel for domestic lighting. Kerosene-based lighting devices, not only for poor quality of light, but also for the risks of indoor air pollution and fire hazards, etc. are not a desired option for domestic lighting purposes. Solar lantern is a better alternative in terms of its quality of illumination, durability and versatility of use. The dissemination model for solar lantern in India has so far been based on cash sales with or without the incentive of capital subsidy. This paper analyses several dissemination models including rental and fee-for-service based on centralized solar charging station concept for CFL- and LED-based designs of solar lanterns available in India. The basis of comparison is the acceptable daily costs or rental to the user as well as to the owner of the charging station. Further, the paper studies the impact of likely escalation in kerosene price on the acceptable daily rental and estimates the amount of subsidy required to make the charging station model viable for disseminating solar lanterns among rural households.

  9. Solar lanterns for domestic lighting in India. Viability of central charging station model

    Energy Technology Data Exchange (ETDEWEB)

    Chaurey, A. [TERI, Darbari Seth Block, Habitat Place, Lodhi Road, New Delhi 110003 (India); Kandpal, T.C. [Centre for Energy Studies, Indian Institute of Technology, Hauz Khas, New Delhi 110016 (India)

    2009-11-15

    About 68 million households in India rely on kerosene as a fuel for domestic lighting. Kerosene-based lighting devices, not only for poor quality of light, but also for the risks of indoor air pollution and fire hazards, etc. are not a desired option for domestic lighting purposes. Solar lantern is a better alternative in terms of its quality of illumination, durability and versatility of use. The dissemination model for solar lantern in India has so far been based on cash sales with or without the incentive of capital subsidy. This paper analyses several dissemination models including rental and fee-for-service based on centralized solar charging station concept for CFL- and LED-based designs of solar lanterns available in India. The basis of comparison is the acceptable daily costs or rental to the user as well as to the owner of the charging station. Further, the paper studies the impact of likely escalation in kerosene price on the acceptable daily rental and estimates the amount of subsidy required to make the charging station model viable for disseminating solar lanterns among rural households. (author)

  10. Modern concepts of thermodynamic optimization in Mexican thermoelectric stations; Conceptos modernos de optimacion termodinamica en centrales termoelectricas mexicanas

    Energy Technology Data Exchange (ETDEWEB)

    Cervantes-de Gortari, J; Vidal-Santo, A.; Mendez-Lavielle, F.; Bautista-Godinez, O. [Departamento de Termoenergia, from Facultad de Ingenieria UNAM (Mexico)

    2002-03-01

    In this paper, a summary review of the current thermodynamic concepts related to the maximum power generation and minimum entropy production are presented. The results of the analysis are considered in Mexican power stations using conventional cycles and are compared with other power stations around the world. [Spanish] En este trabajo se revisa el analisis de maxima generacion de potencia que implica la minimizacion de la produccion de entropia en centrales generadoras de potencia. De acuerdo con los lineamientos mas recientes publicados en la literatura. Los conceptos y resultados del analisis se aplican a varias centrales mexicanas y se comparan con otras centrales en el mundo.

  11. Modern concepts of thermodynamic optimization in Mexican thermoelectric power stations; Conceptos modernos de optimacion termodinamica en centrales termoelectricas mexicanas

    Energy Technology Data Exchange (ETDEWEB)

    Cervantes de Gortari, J.; Vidal Santo, A.; Mendez Lavielle, F.; Bautista Godinez, O. [Facultad de Ingenieria, UNAM, Mexico, D.F. (Mexico)

    2002-03-01

    In this paper, a summary review of the current thermodynamic concepts to the maximum power generation and minimum entropy production are presented. The results of the analysis are considered in Mexican power stations using conventional cycles and are compared with other power stations around the world. [Spanish] En este trabajo se revisa el analisis de maxima generacion de potencia que implica la minimizacion de la produccion de entropia en centrales generadoras de potencia, de acuerdo con los lineamientos mas recientes publicados en la literatura. Los conceptos y resultados del analisis se aplican a varias centrales mexicanas y se comparan con otras centrales en el mundo.

  12. 30 years in the Veracruz state coast landscape: Laguna Verde nuclear power station. 1. ed.; 30 anos de paisaje costero veracruzano: Central Nucleoelectrica Laguan Verde

    Energy Technology Data Exchange (ETDEWEB)

    Guevara, S; Moreno Casasola, P; Castillo Campos, G; Dorantes, C; Gonzalez Garcia, F; Halffter, G; Isunza, E; Lot H, A; Mendoza, R; Paradowska, K; Priego, A; Sanchez Vigil, C; Vazquez, G [Comision Federal de Electricidad and Instituto Nacional de Ecologia A.C. (Mexico)

    2008-07-01

    results of the environmental measurements also demonstrate that the nuclear option of electrical energy generation, when it is operated with safety and efficiency, is one of the friendlier forms with the environment of power generation. [Spanish] Hace 36 anos nacio uno de los proyectos energeticos mas importantes de Mexico; el diseno y construccion de la Central Nuclear Laguna Verde. Este proyecto se volvio realidad gracias al compromiso de un grupo de profesionistas mexicanos que dieron lo mejor de ellos para su realizacion. En Mexico no existia en ese momento una legislacion que contemplara la proteccion del medio ambiente; sin embargo, la Constitucion preve que cuando en el pais no exista legislacion para el desarrollo de un proyecto. Este debe adoptar la legislacion del pais que lo esta vendiendo. En el caso especifico de Laguna Verde, se adopto la legislacion de los Estados Unidos de America y en la parte ambiental se tuvo que realizar el primer Manifiesto de Impacto Ambiental, que se titulo Informe ambiental para la construccion de la Central Nuclear Laguna Verde en el Estado de Veracruz. Este estudio lo realizaron varias instituciones tanto nacionales como extranjeras. Entre las mas sobresalientes se cuenta con: la Universidad Nacional autonoma de Mexico, el Instituto Politecnico Nacional, la Universidad Veracruzana, el Instituto Nacional para la Investigacion de los Recursos Biologicos, el Instituto de Ecologia, A.C. Con este informe, los ingenieros se dieron a la tarea de disenar y construir, los biologos y ecologos a realizar los estudios para mitigar los efectos causados al medio ambiente durante la construccion y, posteriormente, durante la operacion de la Central Nuclear. Despues de 18 anos de operacion comercial de la central se concluye el presente libro, en el cual se comparan los resultados obtenidos en 1972, cuando se iniciaron los estudios para el informe ambiental, contra los obtenidos a lo largo de este periodo. Es importante ver en los resultados de

  13. Planning Future Electric Vehicle Central Charging Stations Connected to Low-Voltage Distribution Networks

    DEFF Research Database (Denmark)

    Marra, Francesco; Træholt, Chresten; Larsen, Esben

    2012-01-01

    A great interest is recently paid to Electric Vehicles (EV) and their integration into electricity grids. EV can potentially play an important role in power system operation, however, the EV charging infrastructures have been only partly defined, considering them as limited to individual charging...... points, randomly distributed into the networks. This paper addresses the planning of public central charging stations (CCS) that can be integrated in low-voltage (LV) networks for EV parallel charging. The concepts of AC and DC architectures of CCS are proposed and a comparison is given...... on their investment cost. Investigation on location and size of CCS is conducted, analyzing two LV grids of different capacity. The results enlighten that a public CCS should be preferably located in the range of 100 m from the transformer. The AC charging levels of 11 kW and 22 kW have the highest potential in LV...

  14. Staff Draft Report. Comparative Cost of California Central Station Electricity Generation Technologies.

    Energy Technology Data Exchange (ETDEWEB)

    Badr, Magdy; Benjamin, Richard

    2003-02-11

    This Energy Commission staff draft report presents preliminary levelized cost estimates for several generic central-station electricity generation technologies. California has traditionally adopted energy policies that balance the goals of supporting economic development, improving environmental quality and promoting resource diversity. In order to be effective, such policies must be based on comprehensive and timely gathering of information. With this goal in mind, the purpose of the report is to provide comparative levelized cost estimates for a set of renewable (e.g., solar) and nonrenewable (e.g., natural gas-fired) central-station electricity generation resources, based on each technology's operation and capital cost. Decision-makers and others can use this information to compare the generic cost to build specific technology. These costs are not site specific. If a developer builds a specific power plant at a specific location, the cost of siting that plant at that specific location must be considered. The Energy Commission staff also identifies the type of fuel used by each technology and a description of the manner in which the technology operates in the generation system. The target audiences of this report are both policy-makers and anyone wishing to understand some of the fundamental attributes that are generally considered when evaluating the cost of building and operating different electricity generation technology resources. These costs do not reflect the total cost to consumers of adding these technologies to a resources portfolio. These technology characterizations do not capture all of the system, environmental or other relevant attributes that would typically be needed by a portfolio manager to conduct a comprehensive ''comparative value analysis''. A portfolio analysis will vary depending on the particular criteria and measurement goals of each study. For example, some form of firm capacity is typically needed with wind

  15. Empirical transfer functions for stations in the Central California seismological network

    Science.gov (United States)

    Bakun, W.H.; Dratler, Jay

    1976-01-01

    A sequence of calibration signals composed of a station identification code, a transient from the release of the seismometer mass at rest from a known displacement from the equilibrium position, and a transient from a known step in voltage to the amplifier input are generated by the automatic daily calibration system (ADCS) now operational in the U.S. Geological Survey central California seismographic network. Documentation of a sequence of interactive programs to compute, from the calibration data, the complex transfer functions for the seismographic system (ground motion through digitizer) the electronics (amplifier through digitizer), and the seismometer alone are presented. The analysis utilizes the Fourier transform technique originally suggested by Espinosa et al (1962). Section I is a general description of seismographic calibration. Section II contrasts the 'Fourier transform' and the 'least-squares' techniques for analyzing transient calibration signals. Theoretical consideration for the Fourier transform technique used here are described in Section III. Section IV is a detailed description of the sequence of calibration signals generated by the ADCS. Section V is a brief 'cookbook description' of the calibration programs; Section VI contains a detailed sample program execution. Section VII suggests the uses of the resultant empirical transfer functions. Supplemental interactive programs by which smooth response functions, suitable for reducing seismic data to ground motion, are also documented in Section VII. Appendices A and B contain complete listings of the Fortran source Codes while Appendix C is an update containing preliminary results obtained from an analysis of some of the calibration signals from stations in the seismographic network near Oroville, California.

  16. System studies of coal fired-closed cycle MHD for central station power plants

    Science.gov (United States)

    Zauderer, B.

    1976-01-01

    This paper presents a discussion of the closed cycle MHD results obtained in a recent study of various advanced energy conversion (ECAS) power systems. The study was part of the first phase of this ECAS study. Since this was the first opportunity to evaluate the coal fired closed cycle MHD system, a number of iterations were required to partially optimize the system. The present paper deals with the latter part of the study in which the direct coal fired, MHD topping-steam bottoming cycle was established as the current choice for central station power generation. The emphasis of the paper is on the background assumptions and the conclusions that can be drawn from the closed cycle MHD analysis. The author concludes that closed cycle MHD has efficiencies comparable to that of open cycle MHD and that both systems are considerably more efficient than the other system studies in Phase 1 of the GE ECAS. Its cost will possibly be slightly higher than that of the open cycle MHD system. Also, with reasonable fuel escalation assumptions, both systems can produce lower cost electricity than conventional steam power plants. Suggestions for further work in closed cycle MHD components and systems is made.

  17. Intake-to-delivered-energy ratios for central station and distributed electricity generation in California

    International Nuclear Information System (INIS)

    In previous work, we showed that the intake fraction (iF) for nonreactive primary air pollutants was 20 times higher in central tendency for small-scale, urban-sited distributed electricity generation (DG) sources than for large-scale, central station (CS) power plants in California [Heath, G.A., Granvold, P.W., Hoats, A.S., Nazaroff, W.W., 2006. Intake fraction assessment of the air pollutant exposure implications of a shift toward distributed electricity generation. Atmospheric Environment 40, 7164-7177]. The present paper builds on that study, exploring pollutant- and technology-specific aspects of population inhalation exposure from electricity generation. We compare California's existing CS-based system to one that is more reliant on DG units sited in urban areas. We use Gaussian plume modeling and a GIS-based exposure analysis to assess 25 existing CSs and 11 DG sources hypothetically located in the downtowns of California's most populous cities. We consider population intake of three pollutants - PM2.5, NOx and formaldehyde - directly emitted by five DG technologies - natural gas (NG)-fired turbines, NG internal combustion engines (ICE), NG microturbines, diesel ICEs, and fuel cells with on-site NG reformers. We also consider intake of these pollutants from existing CS facilities, most of which use large NG turbines, as well as from hypothetical facilities located at these same sites but meeting California's best-available control technology standards. After systematically exploring the sensitivity of iF to pollutant decay rate, the iFs for each of the three pollutants for all DG and CS cases are estimated. To efficiently compare the pollutant- and technology-specific exposure potential on an appropriate common basis, a new metric is introduced and evaluated: the intake-to-delivered-energy ratio (IDER). The IDER expresses the mass of pollutant inhaled by an exposed population owing to emissions from an electricity generation unit per quantity of electric

  18. Crustal seismic velocity in the Marche region (Central Italy): computation of a minimum 1-D model with seismic station corrections.

    OpenAIRE

    Scarfì, L.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, Italia; Imposa, S.; Dipartimento di Scienze Geologiche, University of Catania, Italy; Raffaele, R.; Dipartimento di Scienze Geologiche, Università di Catania, Italy; Scaltrito, A.; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Catania, Catania, Italia

    2008-01-01

    A 1-D velocity model for the Marche region (central Italy) was computed by inverting P- and S-wave arrival times of local earthquakes. A total of 160 seismic events with a minimum of ten observations, a travel time residual ≤ 0.8 s and an azimuthal gap lower than 180° have been selected. This “minimum 1-D velocity model” is complemented by station corrections, which can be used to take into account possible near-surface velocity heterogeneities beneath each station. Using this new P-wave ...

  19. Competencias profesionales de un ingeniero en alimentos. Un estudio sobre su formación matemática

    OpenAIRE

    Muñoz, Hernán

    2004-01-01

    Esta presentación da cuenta de una investigación de tipo cualitativo que genera y sistematiza la información sobre las competencias profesionales y matemáticas de un Ingeniero en Alimentos. Las fuentes utilizadas fueron análisis bibliográfico sobre competencias profesionales, focus group realizados con ingenieros en alimentos de empresas y con académicos de universidades y entrevistas en profundidad realizadas a académicos de las universidades y a ingenieros en alimentos. Se integró y comparó...

  20. APLICACIÓN DE LAS TÉCNICAS MULTICRITERIO MULTIEXPERTOS DENTRO DEL PERFIL DEL INGENIERO INDUSTRIAL

    Directory of Open Access Journals (Sweden)

    Elvis Salinas González

    2005-06-01

    Full Text Available

    Los ingenieros industriales se desarrollan en un ámbito empresarial y dentro de las actividades que realizan están implícitos una serie de procesos de toma de decisiones. De hecho, dirigir es tomar decisiones que se concretan en impartir instrucciones, coordinar personas, liderar grupos y asumir compromisos por ejemplo: contratar un proyecto, seleccionar un obrero, etc. Ellos deben tener los conocimientos necesarios para saber organizar y programar los trabajos que deben efectuarse, asignar los recursos necesarios para ello, y adoptar las medidas para corregir desviaciones que puedan existir. Es por esto, que en el presente trabajo se muestran algunos problemas propios de la esferas de trabajo del ingeniero industrial donde es importante la aplicación de técnicas multicriterio multiexperto

  1. Analysis of ambient air quality trends at selected West Central Airshed Society stations : Tomahawk and Carrot Creek

    International Nuclear Information System (INIS)

    Ambient air trends were evaluated using data collected over a 10 year period from two West Central Airshed Society monitoring stations in rural Alberta. The pollutants studied included ozone (O3), nitrogen dioxide (NO2), sulfur dioxide (SO2), and particulate matter (PM2.5). Two approaches were used to evaluate the trends. The first approach used various percentiles of hourly concentration distributions from each year, while the second approach used frequencies of the number of hours in which various benchmark concentrations were exceeded each year. These statistics were assumed to be linear over the period of study. Hypothesis tests were conducted on the best-fit lines to check whether slope of the lines was zero in order to indicate change. Results from both approaches were found to be in good agreement. At the Tomahawk Station, no statistically dominant change was detected in air quality with respect to O3 and PM2.5. However, SO2 and NO2 showed statistically significant decreasing trends. At the Carrot Creek Station, a pronounced decreasing trend in SO2 was observed, but there was no change in O3 and NO2. The decreasing trends observed with SO2 at both stations is consistent with the province's efforts to reduced natural gas flaring and venting. It was cautioned that since the period of study over which trends were examined was short, the changes or lack of changes observed do not necessarily indicate long term trends

  2. Cogeneration in large processing power stations; Cogeneracion en grandes centrales de proceso

    Energy Technology Data Exchange (ETDEWEB)

    Munoz, Jose Manuel [Observatorio Ciudadano de la Energia A. C., (Mexico)

    2004-06-15

    In this communication it is spoken of the cogeneration in large processing power stations with or without electricity surplus, the characteristics of combined cycle power plants and a comparative analysis in a graph entitled Sale price of electricity in combined cycle and cogeneration power plants. The industrial plants, such as refineries, petrochemical, breweries, paper mills and cellulose plants, among others, with steam necessities for their processes, have the technical and economical conditions to cogenerate, that is, to produce steam and electricity simultaneously. In fact, many of such facilities that exist at the moment in any country, count on cogeneration equipment that allows them to obtain their electricity at a very low cost, taking advantage of the existence steam generators that anyway are indispensable to satisfy their demand. In Mexico, given the existing legal frame, the public services of electricity as well as the oil industry are activities of obligatory character for the State. For these reasons, the subject should be part of the agenda of planning of this power sector. The opportunities to which we are referring to, are valid for the small industries, but from the point of view of the national interest, they are more important for the large size facilities and in that rank, the most numerous are indeed in PEMEX, whereas large energy surplus and capacity would result into cogenerations in refineries and petrochemical facilities and they would be of a high value, precisely for the electricity public service, that is, for the Comision Federal de Electricidad (CFE). [Spanish] En esta ponencia se habla de la cogeneracion en grandes centrales de proceso con o sin excedentes de electricidad, las caracteristicas de plantas de ciclo combinado y se muestra el analisis comparativo en una grafica titulada precio de venta de electricidad en plantas de ciclo combinado y de cogeneracion. Las plantas industriales, tales como refinerias, petroquimicas

  3. Glocalized New Age Spirituality: A Mental Map of the New Central Bus Station in Tel Aviv, Deciphered through Its Visual Codes and Based on Ethno-Visual Research

    Science.gov (United States)

    Ben-Peshat, Malka; Sitton, Shoshana

    2011-01-01

    We present here the findings of an ethno-visual research study involving the creation of a mental map of images, artifacts and practices in Tel Aviv's New Central Bus Station. This huge and complex building, part bus station, part shopping mall, has become a stage for multicultural encounters and interactions among diverse communities of users.…

  4. In their blood : understanding heritage meanings through the socio-historical experience of Hong Kong's Central police station

    OpenAIRE

    Kilias, Antonios Constantinos

    2014-01-01

    This dissertation focuses on the personal layers of meaning attached to a heritage site, using the case study of Hong Kong’s old Central Police Station (CPS). It is a way to enhance the understanding of the site in a way that goes beyond the scope of ‘official’ records and histories, such as those found in conservation reports, government documents, etc. These documents focus heavily on the significant historical stories attached to the site and the site’s formal architectural qualities as a ...

  5. Characterization of alternative electric generation technologies for the SPS comparative assessment: volume 2, central-station technologies

    International Nuclear Information System (INIS)

    The SPS Concept Development and Evaluation Program includes a comparative assessment. An early first step in the assessment process is the selection and characterization of alternative technologies. This document describes the cost and performance (i.e., technical and environmental) characteristics of six central station energy alternatives: (1) conventional coal-fired powerplant; (2) conventional light water reactor (LWR); (3) combined cycle powerplant with low-Btu gasifiers; (4) liquid metal fast breeder reactor (LMFBR); (5) photovoltaic system without storage; and (6) fusion reactor

  6. Characterization of alternative electric generation technologies for the SPS comparative assessment: volume 2, central-station technologies

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    The SPS Concept Development and Evaluation Program includes a comparative assessment. An early first step in the assessment process is the selection and characterization of alternative technologies. This document describes the cost and performance (i.e., technical and environmental) characteristics of six central station energy alternatives: (1) conventional coal-fired powerplant; (2) conventional light water reactor (LWR); (3) combined cycle powerplant with low-Btu gasifiers; (4) liquid metal fast breeder reactor (LMFBR); (5) photovoltaic system without storage; and (6) fusion reactor.

  7. Modern techniques for the emissions control in thermal electric stations; Tecnicas modernas para el control de emisiones en centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Romo Millares, C. A. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1995-12-31

    This paper presents the techniques and the control equipment for emissions in thermal stations that have the highest possibilities of being considered in the immediate future in the national energy panorama and the established frame for the environmental normativity. The pollutant compounds subject to revision are the nitrogen and sulfur oxides and unburned particles. [Espanol] Se presentan las tecnicas y equipos de control de emisiones para centrales termoelectricas que tienen mayores posibilidades de ser consideradas en el futuro inmediato dentro del panorama energetico nacional y el marco establecido por la normatividad ambiental. Los compuestos contaminantes sujetos a revision son los oxidos de nitrogeno y azufre y las particulas inquemadas.

  8. A Terrestrial Reference Frame (TRF, coordinates and velocities for South American stations: contributions to Central Andes geodynamics

    Directory of Open Access Journals (Sweden)

    M. V. Mackern

    2009-12-01

    Full Text Available Satellite positioning systems allow the fixing of the location of a point on the Earth's surface with very good precision and accuracy. To do this, however, it is necessary to determine the point coordinates taking account the reference system and the movements that affect them because of tectonic plate movements. These reference systems are materialized by a significant number of continuous measurement stations in South America. In SIRGAS (Sistema de Referencia Geocéntrico para las Américas, there are four Analysis Centers that process the data collected from satellites of the Global Navigation Satellite Systems (GNSS, with the primary purpose to maintain the international terrestrial reference frame through calculation of the coordinates and velocities of the continuous GNSS stations of the SIRGAS-CON Network.

    In this work, we demonstrate the quality of the solutions from CIMA, one of the SIRGAS official processing centers operating in Mendoza, Argentina, in comparison with other South American processing centers. The importance of precise calculations of coordinates and velocities in a global frame is also shown. Finally, we give estimations of velocities from stations located within deformation zones in the Central Andes.

  9. The effect of locations of central metro stations on real estate values. A case study of Thessaloniki, Greece.

    Directory of Open Access Journals (Sweden)

    Agapi Xifilidou

    2012-07-01

    Full Text Available Almost all of the most populated cities in the world have invested heavily on high capacity urban public transit systems. Apart from the direct economic benefits –travel time reduction, environmental benefits, some indirect benefits are the increase in real estate values (residential and commercial, improved accessibility and possible land use changes towards the development of an area. This study investigates the impact of the future central metro stations of Thessaloniki on real estate values. Real estate values can increase up to 11,3% at a distance shorter than 50 m and gradually decrease up to -14% for a distance greater than 500 m. A hedonic analysis is presented so as to determine the influence of metro stations to 52 commercial properties. The results of the investigation indicate that the changes in market are not necessarily connected or totally attributed to the construction of the metro stations. Instead interesting results show that in some cases common belief about the impact of urban public transit systems can be slightly different.

  10. Methodology for transient simulation of a small heliothermic central station; Metodologia para simulacao transiente de uma pequena central heliotermica

    Energy Technology Data Exchange (ETDEWEB)

    Wendel, Marcelo

    2010-08-15

    The final steps of generating electricity from concentrated solar power technologies are similar to conventional thermal processes, since steam or gas is also employed for moving turbines or pistons. The fundamental difference lies on the fact that steam or hot gas is generated by solar radiation instead of fossil fuels or nuclear heat. The cheapest electricity generated from solar energy has been achieved with large-scale power stations based on this concept. Computer simulations represent a low-cost option for the design of thermal systems. The present study aims to develop a methodology for the transient simulation of a micro-scale solar-thermal power plant (120 kWe) which should be appropriate in terms of accuracy and computational effort. The facility considered can optionally operate as a cogeneration plant producing electric power as well as chilled water. Solar radiation is collected by parabolic troughs, electricity is generated by an organic Rankine cycle and chilled water is produced by an absorption cooling cycle. The organic Rankine cycle is of interest because it allows for a plant with relatively simple structure and automated operation. The simulation methodology proposed in this study is implemented in TRNSYS with new components (TYPEs) developed for the solar field and thermal cycles. The parabolic trough field component is based on an experimental efficiency curve of the solar collector. In the case of the Rankine and absorption cycles, the components are based on performance polynomials generated with EES from detailed thermodynamic models, which are calibrated with performance data from manufacturers. Distinct plant configurations are considered. An optimization algorithm is used for searching the best operating point in each case. Results are presented for the following Brazilian sites: Fortaleza, Petrolina and Bom Jesus da Lapa. The latter offers the highest global plant performance. An analysis about the influence of the thermal storage on

  11. La formación del ingeniero hidráulico

    OpenAIRE

    Kobus, Helmut; Plate, Erich; Shen, Hsieh Wen; Szöllösi-Nagy, A.

    1994-01-01

    En este artículo un comité de expertos pertenecientes a las asociaciones AIHR (Asociación Internacional de Investigaciones Hidráulicas) y UNESCO, con una reflexión común presentan los recientes desarrollos en Ingeniería Hidráulica y sus aplicaciones para la formación de ingenieros hidráulicos. Las estructuras de las disciplinas fundamentales subyacentes, geociencias y ciencias de la ingeniería y la gran variedad de asignaturas de ingeniería envueltas deben ser consideradas en el contexto m...

  12. Radiofrequency radiation at Stockholm Central Railway Station in Sweden and some medical aspects on public exposure to RF fields

    Science.gov (United States)

    Hardell, Lennart; Koppel, Tarmo; Carlberg, Michael; Ahonen, Mikko; Hedendahl, Lena

    2016-01-01

    The Stockholm Central Railway Station in Sweden was investigated for public radiofrequency (RF) radiation exposure. The exposimeter EME Spy 200 was used to collect the RF exposure data across the railway station. The exposimeter covers 20 different radiofrequency bands from 88 to 5,850 MHz. In total 1,669 data points were recorded. The median value for total exposure was 921 μW/m2 (or 0.092 μW/cm2; 1 μW/m2=0.0001 μW/cm2) with some outliers over 95,544 μW/m2 (6 V/m, upper detection limit). The mean total RF radiation level varied between 2,817 to 4,891 μW/m2 for each walking round. High mean measurements were obtained for GSM + UMTS 900 downlink varying between 1,165 and 2,075 μW/m2. High levels were also obtained for UMTS 2100 downlink; 442 to 1,632 μW/m2. Also LTE 800 downlink, GSM 1800 downlink, and LTE 2600 downlink were in the higher range of measurements. Hot spots were identified, for example close to a wall mounted base station yielding over 95,544 μW/m2 and thus exceeding the exposimeter's detection limit. Almost all of the total measured levels were above the precautionary target level of 3–6 μW/m2 as proposed by the BioInitiative Working Group in 2012. That target level was one-tenth of the scientific benchmark providing a safety margin either for children, or chronic exposure conditions. We compare the levels of RF radiation exposures identified in the present study to published scientific results reporting adverse biological effects and health harm at levels equivalent to, or below those measured in this Stockholm Central Railway Station project. It should be noted that these RF radiation levels give transient exposure, since people are generally passing through the areas tested, except for subsets of people who are there for hours each day of work. PMID:27633090

  13. Enseñanza e Ingeniería en Colombia: El caso de la Escuela de Ingenieros de la Universidad Nacional, 1867-1890

    Directory of Open Access Journals (Sweden)

    Mauricio Moscoso Díaz

    2004-12-01

    Full Text Available This article deals with the teaching of engineering, from an institutional perspective, in Colombia through the political and economic factors that affected the School of Engineering of the National University. Due to political instability and budgetary restrictions, the academic offerings were limited and the survival of the School itself was threatened. This article points to the means through which the Colombian élite strengthened technology and relations with the state. The article also shows how the number and influence of engineers grew as a consequence of the opening of new networks of communication in Colombia.//El presente artículo aborda la enseñanza de Ia ingeniería en Colombia, a partir de los factores políticos y económicos que afectaron la Escuela de Ingenieros de la Universidad Nacional, desde una perspectiva institucional. Observa que debido a la inestabilidad y las restricciones presupuestales, se limitaron las posibilidades académicas y se pusieron en peligro Ia supervivencia de las instituciones educativas. No obstante el estudio señala los mecanismos mediante los cuales la élite colombiana, orientó sus esfuerzos hacia la sofisticación técnica a pesar del estatismo. Explora igual¬mente las relaciones existentes con el Estado, durante la coyuntura entre el radicalismo liberal y el advenimiento de la Regeneración. Finalmente alude a la economía de exportación, como eje central que posibilitó la construcción de vías de comunicación, y el consecuente ascenso de los ingenieros.

  14. Solar cogeneration: Cimarron River station, Central Telephone and Utilities-Western Power

    Energy Technology Data Exchange (ETDEWEB)

    Harder, J.E.

    1981-04-01

    The site-specific conceptual design progress is described for a solar central receiver cogeneration facility at a Kansas utility. The process is described which led to the selection of the preferred solar cogeneration facility. The status of the conceptual design is presented. The evaluation of system performance is described. A test program is described that is to determine the magnitude of impact that local environmental factors have on collector system performance and to measure the direct normal insolation at the cogeneration facility site. The system specification is appended. (LEW)

  15. The research station "Vaskiny Dachi", Central Yamal, West Siberia, Russia – a review of 25 years of permafrost studies

    Directory of Open Access Journals (Sweden)

    Marina O. Leibman

    2015-03-01

    Full Text Available The research station "Vaskiny Dachi" on the Yamal Peninsula was established in 1988. Activities aimed at monitoring of permafrost and related environmental features under a relatively low level of nature disturbances caused by gas field development. Cryogenic processes that may affect the environment and their structures have been of primary interest. Landslides are the most common cryogenic processes in Central Yamal in general and also in the proximity of the station. Field surveys of numerous landslides, analysis of their dependence on climatic parameters and their fluctuations resulted in novel classification of cryogenic landslides based on mechanisms of their development. Dating by radiocarbon and dendrochronology allows the separation of cycles of landslide activation. Cryogenic landslides control the development of other processes, such as thermal erosion, river channel erosion and thermokarst. It also affects topography, vegetation pattern, geochemistry of vegetation, ground water and soils. As a result, permafrost parameters, specifically active layer depth and ground temperature, moisture and ice content in the active layer, depend indirectly on landsliding. Monitoring within the framework of the main programs of the International Permafrost Association, such as Circumarctic Active Layer Monitoring (CALM, since 1993 and Thermal State of Permafrost (TSP, since 2011, play an important role among the research activities. From the collected data one can conclude that ground temperature increased on average by about 1 °C since the 1990s. At the same time, active layer fluctuations do not exactly follow the air temperature changes. Spatial changes in ground temperature are controlled by the redistribution of snow which is resulting from strong winds characteristic for tundra environments and the highly dissected relief of Central Yamal. Temporal variations rather depend on air temperature fluctuations but the rate differs in various

  16. El papel del ingeniero mecánico en el contexto energético actual

    Directory of Open Access Journals (Sweden)

    María Dolores Durán García

    2010-01-01

    Full Text Available En el presente trabajo se analiza, en primer término, la evolución del papel del ingeniero a través de la historia, desde sus orígenes en la Revolución Industrial hasta nuestros días; asimismo se abordan las diferentes formas en que se ha ido concibiendo la función del ingeniero mecánico y los efectos de la situación económica, tecnológica y medioambiental en estas percepciones sociales. Esta última implicación, la ambiental, sirve de base para establecer la responsabilidad actual de este profesional de la Ingeniería en el consumo de energía, tanto en México como a nivel mundial y el papel que debe cumplir en el diseño de sistemas que permitan transformar y/o emplear la energía de manera racional y eficiente. Con base en lo anterior, finalmente se indican algunos de los conocimientos y habilidades que este profesional debe adquirir durante su formación profesional, para cumplir con esta importante responsabilidad.

  17. Uso de las TIC como parte de una estrategia para formar ingenieros auto reflexivos

    Directory of Open Access Journals (Sweden)

    Félix I. Cabrera Vega

    2014-04-01

    Full Text Available La enseñanza tradicional de la ingeniería, basada en clases magistrales, no reconocería las inteligencias múltiples ni las diferentes formas de aprender que tienen los alumnos. De este modo,la mayoría de estudiantes no interiorizan los conceptos ni se preocupanpor las necesidades reales de las personas y del ambiente que las rodea. Para dejar de desarrollarse en un ámbito óntico-lógico, el ingeniero necesita ser formado en un ambiente de trabajo donde se respete su individualidad y se le brinde libertad para desenvolverse. Por lo tanto, el docente debe ser un guía que emplee las herramientas tecnológicas actuales, utilice diversas formas de enseñanza y muestre empatía con sus alumnos. También, la edad y experiencia de las personas establece formas de aprendizaje particulares. Por ello, en este trabajo se presenta una experiencia de enseñanza que combina las ideas de Gardner, Montessori y la andragogía. Además, se resalta el papel fundamental que cumplen las TICS en el proceso de formación de ingenieros auto reflexivos.

  18. Proceedings of the Flat-Plate Solar Array Project Research Forum on the Design of Flat-Plate Photovoltaic Arrays for Central Stations

    Science.gov (United States)

    The Flat Plate Solar Array Project, focuses on advancing technologies relevant to the design and construction of megawatt level central station systems. Photovoltaic modules and arrays for flat plate central station or other large scale electric power production facilities require the establishment of a technical base that resolves design issues and results in practical and cost effective configurations. Design, qualification and maintenance issues related to central station arrays derived from the engineering and operating experiences of early applications and parallel laboratory reserch activities are investigated. Technical issues are examined from the viewpoint of the utility engineer, architect/engineer and laboratory researcher. Topics on optimum source circuit designs, module insulation design for high system voltages, array safety, structural interface design, measurements, and array operation and maintenance are discussed.

  19. African aerosol and trace-gas emissions from the Central-African Bujumbura station.

    Science.gov (United States)

    Gielen, Clio; Van Roozendael, Michel; Hendrick, Francois; Pinardi, Gaia; De Smet, Isabelle; Fayt, Caroline; Hermans, Christian; Ndenzako, Eugene; Nzohabonayo, Pierre; Akimana, Rachel

    2015-04-01

    We present aerosol and trace-gas retrievals from the new Central-African measurement site of Bujumbura, where a new MAX-DOAS instrument and cimel sun photometer have been operational since late 2013. This is the first time that MAX-DOAS measurements are performed in Central Africa, which are critical to resolve the large uncertainties of satellite observations of trace gases and aerosols over this area. The Bujumbura region is a source of strong biogenic compounds and biomass burning products, and invaluable to study the export of African emissions to the Indian ocean. Using the bePRO radiative transfer tool, we retrieve aerosol optical depths (AODs) and vertical extinction profiles for aerosols and trace gases such as NO2 and HCHO. The AOD retrievals are compared to the co-located AERONET sun photometer measurements and further analysed to investigate seasonal and diurnal cycles in the observed variability or to detect biomass-burning events.For the trace gases NO2 and HCHO, the ground-based MAX-DOAS vertical columns and profiles are used for tropospheric trace-gas validation of the GOME-2 and OMI satellites. We further discuss the representativity of the site regarding satelitte comparisons and modelling efforts, given its specific orography.

  20. Labor urbanística y desarrollo local de los ingenieros militares en La Habana, Cuba. Siglo XIX

    Directory of Open Access Journals (Sweden)

    María Victoria Zardoya Loureda

    2015-03-01

    El presente trabajo se centra en la labor de los ingenieros militares durante el siglo XIX, relacionada con el importante cambio de escala e imagen que transformó a la capital cubana a lo largo de esos años.

  1. Proceedings of the Flat-Plate Solar Array Project Research Forum on the design of flat-plate photovoltaic arrays for central stations

    Energy Technology Data Exchange (ETDEWEB)

    None

    1983-01-01

    The Flat-Plate Solar Array Project, managed by the Jet Propulsion Laboratory for the US Department of Energy, has focused on advancing technologies relevant to the design and construction of megawatt-level central-station systems. Photovoltaic modules and arrays for flat-plate central-station or other large-scale electric power production facilities require the establishment of a technical base that resolves design issues and results in practical and cost-effective configurations. The Central Station Research Forum addressed design, qualification and maintenance issues related to central-station arrays derived from the engineering and operating experiences of early applications and parallel laboratory research activities. Technical issues were examined from the viewpoint of the utility engineer, architect-engineer and laboratory researcher. The forum included presentations on optimum source-circuit designs, module insulation design for high system voltages, array safety, structural interface design, measurements and array operation and maintenance. The Research Forum focused on current capabilities as well as design difficulties requiring additional technological thrusts and/or continued research emphasis. Session topic summaries highlighting major points during group discussions, identifying promising technical approaches or areas of future research, are presented.

  2. Progress report of the Munich central railway station - airport high-speed maglev line project; Projektstand der Magnetschnellbahn Muenchen Hauptbahnhof - Flughafen

    Energy Technology Data Exchange (ETDEWEB)

    Keil, J. [DB Magnetbahn GmbH, Muenchen (Germany)

    2006-07-01

    The dates for discussing the project of a maglev railway connection from the Munich central railway station to the airport are drawing near. The plans generated so far are proof of the fact that the project is easy on man and environment. (orig.)

  3. La medicion de la absorcion de luz de soluciones quimicas, una practica social de ingenieros bioquimicos

    OpenAIRE

    Galicia, Adriana; Arrieta, Jaime; Landa, Lorena

    2007-01-01

    En éste artículo, mostramos evidencias de la interacción de estudiantes de ingeniería bioquímica en la construcción de lo lineal a partir de la modelación de la absorción de luz de soluciones de glucosa a diferentes concentraciones en el laboratorio de química, tomando como premisa que ésta actividad es una practica social que se realiza en comunidades de ingenieros bioquímicos en el análisis cuantitativo para determinar la concentración de una sustancia en una muestra a partir de la medición...

  4. La formación del ingeniero hidráulico para el siglo XXI

    OpenAIRE

    Lopardo, Raúl A.

    1995-01-01

    Los cambios producidos por la revolución electrónica, la generalización de la informática y la valoración ambiental indican la necesidad de introducir modificaciones de fondo en la formación de los ingenieros hidráulicos de cara al Siglo XXI. Se reivindica el interés de enfatizar la relevancia de la carrera de Ingeniería Hidráulica, detallándose su campo de acción y las posibilidades profesionales que actualmente se presentan en el tema. dado lo vertiginoso de las alteraciones que se están ge...

  5. Ozone, carbon monoxide and nitrogen oxides time series at four alpine GAW mountain stations in central Europe

    Directory of Open Access Journals (Sweden)

    S. Gilge

    2010-12-01

    Full Text Available Long-term, ground based in-situ observations of ozone (O3 and its precursor gases nitrogen dioxide (NO2 and carbon monoxide (CO from the four sites Hohenpeissenberg and Zugspitze (D, Sonnblick (A and Jungfraujoch (CH are presented for the period 1995–2007. These Central European alpine mountain observatories cover an altitude range of roughly 1000 to 3500 m. Comparable analytical methods and common quality assurance (QA procedures are used at all sites. For O3 and CO, calibration is linked to primary calibrations (O3 or CO standards provided by the Central Calibration Laboratory (CCL at NOAA/ESRL. All stations have been audited by the World Calibration Centre (WCC for CO and O3 (WCC-Empa; CH. Data from long-term measurements of NO2 and CO are only available from Hohenpeissenberg and Jungfraujoch. Both sites show slightly decreasing mixing ratios of the primarily emitted NO2 and the partly anthropogenically emitted CO between 1995 and 2007. The findings are generally consistent with shorter observation periods at Zugspitze and Sonnblick and thus are considered to represent regional changes in Central European atmospheric composition at this altitude range. Over the same period, 1995–2007, the O3 mixing ratios have slightly increased at three of the four sites independent of wind sector. Trends are often more pronounced in winter and less in summer; highest declines of NO2 and CO are observed in winter and the lowest in summer, whereas the strongest O3 increase was detected in winter and lowest or even decline in summer, respectively. Weekly cycles demonstrate anthropogenic impact at all elevations with enhanced NO2 on working days compared to weekends. Enhanced O3 values on working days indicating photochemical production from anthropogenic precursors are only observed in summer, whereas in all other seasons anti

  6. Ozone, Carbon monoxide and Nitrogen oxides time series at four Alpine GAW mountain stations in Central Europe

    Directory of Open Access Journals (Sweden)

    S. Gilge

    2010-08-01

    Full Text Available Long-term, ground based in-situ observations of Ozone (O3 and its precursor gases Nitrogen dioxide (NO2 and Carbon monoxide (CO from the four sites Hohenpeissenberg and Zugspitze (D, Sonnblick (A and Jungfraujoch (CH are presented for the period 1995–2007. These Central European alpine mountain observatories cover an altitude range of roughly 1000 to 3500 m. Comparable analytical methods and common quality assurance (QA procedures are used at all sites. For O3 and CO, calibration is linked to primary calibrations (O3 or CO standards provided by the Central Calibration Laboratory (CCL at NOAA/ESRL. All stations have been audited by the World Calibration Centre (WCC for CO and O3 (WCC-Empa; CH. Data from long-term measurements of NO2 and CO are only available from Hohenpeissenberg and Jungfraujoch. Both sites show slightly decreasing mixing ratios of the primarily emitted NO2 and the partly anthropogenically emitted CO between 1995 and 2007. The findings are generally consistent with shorter observation periods at Zugspitze and Sonnblick and thus are considered to represent regional changes in Central European atmospheric composition at this altitude range. Over the same period 1995–2007, the O3 mixing ratios have slightly increased at three of the four sites. This was observed independent of wind sector and for most seasons, with a tendency to higher positive trends in winter and lower and partly negative trends in summer. Trends are often more pronounced in winter and less in summer; highest declines of NO2 and CO are observed in winter and the lowest in summer, whereas the highest rate of O3 increase was detected in winter and lowest in summer, respectively. Weekly cycles demonstrate anthropogenic impact at all elevations with enhanced NO2 on working days compared to weekends. Enhanced O3 values on working days

  7. [Spatial representativeness of monitoring stations for air quality in Florence (Tuscany Region, Central Italy) according to ARPAT e LaMMA. Critical observations].

    Science.gov (United States)

    Grechi, Daniele

    2016-01-01

    On March 2015, the Environmental Protection Agency of Tuscany Region (Central Italy) and the Laboratory of monitoring and environmental modelling published a Report on spatial representativeness of monitoring stations for Tuscan air quality, where they supported the decommissioning of modelling stations located in the Florentine Plain. The stations of Signa, Scandicci, and Firenze-Bassi, located in a further South area, were considered representative Believing that air quality of the Plain could be evaluated by these stations is a stretch. In this text the author show the inconsistency of the conclusion of the Report through correlation graphs comparing daily means of PM10 detected in the disposed stations and in the active ones, showing relevant differences between the reported values and the days when the limits are exceeded. The discrepancy is due to the fact that uncertainty of theoretical estimates is greater than the differences recorded by the stations considered as a reference and the areas they may represent. The area of the Plain has a population of 150,000 individuals and it is subject to a heavy environmental pression, which will change for the urban works planned for the coming years. The population's legitimate request for the analytical monitoring of air pollution could be met through the organization of participated monitoring based on the use of low-cost innovative tools.

  8. Investigation on the environmental radioactivity of the proposed location for Nuclear Power Plant Station in Ujung Watu area, Central Java

    International Nuclear Information System (INIS)

    During the period of November 1981 and March 1983, preliminary investigation of the environmental radioactivity at the proposed location of nuclear power station in Ujung Watu area in Central Java has been carried out. The investigated area covers an area within a radius of 5 km of the proposed location. During this period a total of about 319 environmental samples which consist of soils, grasses, drinking and surface waters, several food-item of agricultural and sea product have been collected. Measurement of exposure and absorbed dose level were also carried out at 52 and 27 locations within the investigated area. Measurement of exposure dose was carried out using scintillation probe detector coupled to rate meter and absorbed dose level was measured using TL-dosemeter. The samples were analysed for the gross - α and β radioactivity, the content of H-3, Cs-137 and Sr-90. Results showed that the radiation level of the area has a range of 4 ± 18 mR/h with an average of about 4.6 x 1.4 mR/h. Absorbed dose showed a value within the range of 4.5 - 6.9 x 10-7 Gy/day with an average value of 6.2 ± 1.2 x 10-7 Gy/day. The value area is within the normal range of natural level. Measurement of fall-out indicated that the integral impact of Cs-137 and Sr-90 from fall-out to this area were about 2.6 MBq/km2 and 1.5 MBg/km2 respectively. However, no Cs-137 and Sr-90 were detected in the samples collected during this study. (author). 9 refs

  9. Human Settlements in the South-Central U.S., Viewed at Night from the International Space Station

    Science.gov (United States)

    Dawson, Melissa; Evans, Cynthia; Stefanov, William; Wilkinson, M. Justin; Willis, Kimberly; Runco, Susan

    2012-01-01

    A recent innovation of astronauts observing Earth from the International Space Station (ISS) is documenting human footprints by photographing city lights at night time. One of the earliest night-time images from the ISS was the US-Mexico border at El Paso-Ciudad Juarez. The colors, patterns and density of city lights document the differences in the cultural settlement patterns across the border region, as well as within the urban areas themselves. City lights help outline the most populated areas in settlements around the world, and can be used to explore relative population densities, changing patterns of urban/suburban development, transportation networks, spatial relationship to geographic features, and more. The data also provides insight into parameters such as surface roughness for input into local and regional climate modeling and studies of light pollution. The ground resolution of night-time astronaut photography from the ISS is typically an order of magnitude greater than current Defense Meteorological Satellite Program (DMSP) data, and therefore can serve as a "zoom lens" for selected urban areas. Current handheld digital cameras in use on the ISS, optimized for greater light sensitivity, provide opportunities to obtain new detailed imagery of atmospheric phenomena such as airglow, aurora, and noctilucent clouds in addition to documenting urban patterns. ISS astronauts have taken advantage of increasingly sensitive digital cameras to document the world at night in unprecedented detail. In addition, the capability to obtain time-lapse imagery from fixed cameras has been exploited to produce dynamic videos of both changing surface patterns around the world and atmospheric phenomena. We will profile some spectacular images of human settlements over the South-Central U.S., and contrast with other images from around the world. More data can be viewed at http://eol.jsc.nasa.gov/Videos/CrewEarthObservationsVideos/. US-Mexico border is obvious by the different

  10. Del territorio a la empresa: conocimientos productivos entre los ingenieros del norte de México

    Directory of Open Access Journals (Sweden)

    Alfredo Hualde Alfaro

    2001-01-01

    Full Text Available El crecimiento del empleo industrial con el aumento de la inversión extranjera ha producido un incremento de los mercados profesionales de ingenieros en las ciudades del norte de México. En los casos a los que el artículo se refiere, dicho crecimiento es mucho más importante en Tijuana que en Hermosillo. En una época de valoración creciente del conocimiento, la pericia y las competencias para el desarrollo local y regional, es necesario preguntarse por la naturaleza de dichos conocimientos, la forma de transmisión de los mismos y los actores e instituciones que intervienen en la producción y reproducción de los conocimientos productivos. El artículo toma el caso de las maquiladoras de Tijuana y de la empresa Ford de Hermosillo con el objetivo de reflexionar acerca de la forma en que dichos conocimientos constituyen (o no nexos de articulación entre las empresas y el territorio.

  11. Technical and environmental aspects of combined cycle power stations with integrated gasification (CCGI); Aspectos tecnicos y medioambientales de las centrales de ciclo combinado con gasificacion integrada (CCGI)

    Energy Technology Data Exchange (ETDEWEB)

    Beltran Mora, Hector Alejandro; Urias Romero, Francisco [Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2004-06-15

    A description is presented of the operation of the Combined Cycle Power Stations with Integrated Gasification (CCGI) where the use of solid fuels (coal, vacuum residues, petroleum coke, and biomass) or liquids is possible in a thermal power station with the efficiency and many of the own environmental benefits of the combined cycles. The gasification process is analyzed, that is a thermo-chemical process by means of which a fuel that is in solid state or liquid becomes to the gaseous state by means of a partial oxidation and the obtained gas of this process is called synthesis gas (syngas, by its abbreviations in English) that is used in Combined Cycle Power Stations as a substitute for the natural gas. Also the other components of this type of power stations are shown, such as the air separating unit, and some of the modifications that are due to make to adapt a gas turbine so that it uses syngas, and the considerations of their integration with the air separating unit to optimize the operation of the plant are detailed. A comparison of efficiency values of power stations CCGI with the conventional carbon-electric and the power stations of combined cycle that use natural gas is also shown. Finally the emissions of pollutants of SO{sub 2}, NO{sub x} and CO{sub 2} are analyzed. The possibility of using fuels like petroleum coke and vacuum tower residues that are produced in the Cadereyta refinery is studied for the possible construction of a CCGI power station in Mexico. [Spanish] Se presenta la descripcion del funcionamiento de las centrales ciclo combinado con gasificacion integrada (CCGI) donde es posible el uso de combustibles solidos (carbon, residuos de vacio, coque de petroleo, biomasa) o liquidos en una central termica con la eficiencia y muchos de los beneficios ambientales propios de los ciclos combinados. Se analiza el proceso de gasificacion, que es un proceso termoquimico mediante el cual se convierte un combustible que se encuentra en estado solido o

  12. The Borders of Engineers Without Borders: A Self-Assessment of Ingenieros Sin Fronteras Colombia

    Directory of Open Access Journals (Sweden)

    Andrés Felipe Valderrama Pineda

    2012-05-01

    Full Text Available This article results from a process of self-assessment within Ingenieros Sin Fronteras Colombia (ISFC. The activities usually referred to as humanitarian engineering, assistive engineering, engineering for aid, and/or engineering for development are increasingly involving educational frameworks, activities, and institutions in service-learning schemes. In this article, we discuss the issues and challenges that arise from this combination of objectives, activities, and institutional settings, especially when these approaches are implemented in the Global South. To do so we reflect on the type of service learning we are conducting in Colombia. We develop a general service learning in engineering typology to situate our work. We find that our Local Learning in the South collaboration makes the work of ISFC both different than and similar to other service-learning engagements. It is different in the sense that local engagements do not experience the cultural and language barriers faced by cross-cultural projects. It is similar in the sense that, with the exception of the cross-cultural challenges, our projects run the same risks as any other service learning in engineering projects in the world. To reflect on these risks we propose a set of five questions to self-assess our work. Thinking about the choice of naming our work “ingeniería sin fronteras” (engineering without borders, we consider what kind of borders we are dealing with and propose five: financial, epistemic, engineering educational, knowledge, and reputation. We invite other organizations to question the kind of borders their work aims at eliminating but risks replicating.

  13. MECATRÓNICA COMO DISCIPLINA ACADÉMICA EN LA FORMACIÓN PROFESIONAL DEL INGENIERO MECÁNICO

    OpenAIRE

    Maria Guanipa Pérez; Herry Guillen

    2007-01-01

    El propósito fundamental de esta investigación fue determinar los criterios para insertar la disciplina académica mecatrónica en la formación profesional del ingeniero mecánico, en la escuela de ingeniería mecánica de la facultad de ingeniería de La Universidad del Zulia (LUZ). Para alcanzar este objetivo se desarrolló un estudio explicativo, correlacional de carácter práctico, bajo un diseño no experimental y transversal. La muestra estuvo conformada por treinta (30) docentes y treinta (30) ...

  14. Pietro Antonio Tomasello de Padua : un ingeniero militar véneto en la Sicilia de Carlos V

    OpenAIRE

    Vesco, Maurizio

    2011-01-01

    En 1522 el virrey de Sicilia, Ettore Pignatelli, conde de Monteleone, inició una gran campaña para fortalecer las defensas de las principales ciudades de la costa de Sicilia: Palermo, Trapani, Milazzo, Siracusa y, algunos años más tarde, incluso Messina. El ingeniero real Pietro Antonio Tomasello de Padua, un técnico militar Veneto, pidió renovar el sistema de defensas de la isla, con la introducción por primera vez de bastiones circulares y poligonales en for...

  15. 集中型充电站容量规划模型研究%Study on Capacity and Site Planning of Large-scale Centralized Charging Stations

    Institute of Scientific and Technical Information of China (English)

    高赐威; 张亮; 薛飞; 刘红超

    2012-01-01

    购买电池的初期投资大、电池充电时间长以及分布式随机充电对电网负面影响大是制约电动汽车发展的重要因素.基于里程计费的换电池模式实际上采用了电池租赁模式和慢充技术,而且可以通过建立规模庞大的集中型充电站为电池进行充电,因此为当前电动汽车发展问题具有竞争力的解决方案.但是作为新生事物,集中型充电站规划建设缺乏科学理论指导,从区域各类型电动汽车的电池组充电需求出发,在综合考虑集中型充电站建设初期购置设备费用和运行期间购买电能费用的基础上,建立了集中型充电站最优容量配置模型,数值算例仿真验证了模型的有效性相关分析表明,电池组需求和充电电价设置对集中型充电站的容量规划影响巨大.%The high initial investment of battery, the long charging time, and the negative effect on the power grid due to the electric vehicles' distributed and random charging, are the main factors that limit the development of electric vehicles (EVs). The battery swapping mode actually applies battery leasing model and the slow charging technology, and large-scale centralized charging station can be built to recharge the battery, which has become a competitive way to solve this key problem. As a new-born thing, it is lack of theoretical guidance for the planning and operation of large-scale centralized charging station. Given the regional charging demand and considering the initial investment of equipment and the electric energy cost during the operation period, a capacity planning model for centralized charging station was established. The effectivity of the model was tested by a numerical example. Relative analysis demonstrates that battery demand and charging tariff will have great influence on the capacity planning of the centralized charging station.

  16. Design optimization of the Laguna Verde nuclear power station fuel recharge; Optimacion del diseno de recargas de combustible para la Central Laguna Verde

    Energy Technology Data Exchange (ETDEWEB)

    Cortes Campos, Carlos Cristobal [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Montes Tadeo, Jose Luis [Instituto Nacional de Investigaciones Nucleares (ININ), Salazar (Mexico)

    1991-12-31

    It is described, in general terms, the procedure that is followed to accomplish the optimization of the recharge design, and an example is shown where this procedure was applied for the analysis of the type BWR reactor of Unit No. 1 of the Laguna Verde Nuclear Power Station. [Espanol] Se describe en terminos generales el procedimiento que se sigue para realizar la optimacion del diseno de recargas, y se muestra un ejemplo en el que se utilizo dicho procedimiento para el analisis del reactor tipo BWR de la unidad 1, de la Central Laguna Verde (CLV).

  17. La actividad de docencia en clase mediada por la TIC: Proyecto de educación continuada para arquitecto e ingeniero

    OpenAIRE

    Maria do Carmo Duarte Freitas; Ricardo Mendes Junior; Sérgio Scheer; Sergio Fernando Tavares

    2011-01-01

    El art??culo relata la propuesta de educaci??n continuada para arquitecto e ingeniero civil ??? designado como Residencia T??cnica. En este proyecto, catedr??ticos comparten experiencias te??ricas y pr??cticas con bur??cratas, ingenieros y arquitectos reci??n-formados, en una sociedad entre la Universidad y un ??rgano p??blico de la Provincia del Paran?? - Brasil. Durante el proceso de formaci??n, los profesores y alumnos discuten y buscan soluciones a los problemas que experim...

  18. Investigación y proceso: esencia de la formación de ingenieros químicos

    Directory of Open Access Journals (Sweden)

    Daniel Bogoya M.

    2011-01-01

    Full Text Available En este trabajo se plantea una metodología para la confección de un currículo de ingeniería química, partiendo de la concepción de un modelo de educación superior conducente a satisfacer combinadamente una demanda solvente y orientada, obediente e inmediatista, proveniente de los anhelos de producción de la industria química; la pretensión de un mejoramiento del medio de vida del profesional, que intenta un ascenso en todos los órdenes; los planes del Estado en materia de desarrollo industrial y económico, aún desarticulados entre sectores y en términos del tiempo; y el papel estratégico que la universidad debe jugar en una sociedad, dependiente también en el ámbito de la ingeniería química, donde se hace indispensable que los intelectuales asuman la responsabilidad de concebir y conducir con audacia los procesos de innovaeión que se requieren. Con base en este entorno se proponen como ejes centrales, para la formación de ingenieros químicos: la generación de una cultura investigativa que como actitud ante la vida forje un espíritu crítico, dispuesto a explorar otros caminos; y el dominio de las características que permitan entender un proceso químico y sus interacciones con la energía, la economía y el medio ambiente, donde interviene sistemáticamente un amplio conjunto de conceptos, posible de organizar de diferentes maneras y de sintetizar en un código fijo que se va actualizando permanentemente. Así, el primer eje tiene que ver fundamentalmente con la metodología y el segundo con los contenidos. La metodología propuesta implica archivar el paradigma de la "clase magistral", para pasar al del "seminario investigativo", ya usual en otras sociedades. Aquí se busca que cada educando protagonice su propia existencia y esculpa su propia estatua, en lugar de seguir única, callada y obedientemente la huella dejada por el docente. La organización de los contenidos implica una visión orgánica, para que cada

  19. LABOR URBANÍSTICA Y DESARROLLO LOCAL DE LOS INGENIEROS MILITARES EN LA HABANA, CUBA. SIGLO XIX

    Directory of Open Access Journals (Sweden)

    María Victoria Zardoya Loureda

    2011-01-01

    Full Text Available La evolución arquitectónica y urbana de La Habana durante sus primeras centurias de existencia, estuvo condicionada en gran medida por la signifi cación de su puerto dentro de la táctica defensiva de carácter intercontinental que desplegó la corona española en sus dominios americanos. Desde fi nales del siglo XVIII y sobre todo, cuando Cuba y Puerto Rico quedaron como únicas colonias hispanas en América, el trabajo de los ingenieros militares se volcó hacia el interior del país, dirigido a una defensa de carácter diferente, destinada a aplacar las ansias independentistas criollas. Su quehacer entonces combinó los objetivos militares con acciones civiles que tuvieron una gran trascendencia urbana. El presente trabajo se centra en la labor de los ingenieros militares durante el siglo XIX, relacionada con el importante cambio de escala e imagen que transformó a la capital cubana a lo largo de esos años.

  20. Methodology for carrying out energy diagnosis in auxiliaries systems in thermal electrical central stations; Metodologia para realizar un diagnostico energetico en sistemas auxiliares de centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Nebradt Garcia, Jesus [Comision Federal de Electricidad (CFE), Mexico, D. F. (Mexico); Rojas Hidalgo, Ismael; Huante Perez, Liborio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1998-12-31

    One of the potential areas for energy saving in Central Electric Power Plants are the auxiliaries system, so as to based in a preliminary energy diagnosis and considering that energy saving measures would be taken, going from the instrumentation, operational changes in equipment, as well as in using velocity variators in motors, it turns out to be that the energy consumption of auxiliaries at 75% load in a 150 MW thermal power plant varies from 3% to 4% and for the case of a 350 MW power plant the energy consumption of the auxiliaries represents 2 to 3.5%. Nowadays this consumption are above 6%. Considering that the country has 40 units with capacities varying from 150 to 350 MW, the economical and the fuel saving would be substantial. This paper will present a summary of the methodology to be used to carry out this type of projects. [Espanol] Una de las areas potenciales de ahorro de energia en centrales termoelectricas son los sistemas auxiliares, de tal manera que basados en un diagnostico energetico preliminar y considerando que se aplicarian las medidas de ahorro de energia que van desde la instrumentacion, cambios operativos en equipos, asi como el uso de variadores de velocidad en motores, se tienen que los consumos de auxiliares para un 75% de carga en una central termoelectrica de 150 MW varian desde un 3% hasta un 4% y para el caso de una central termoelectrica de 350 MW, el consumo de auxiliares representa del 2 al 3.5%. Hoy en dia dichos consumos estan por encima del 6%. Si consideramos que el pais cuenta con 40 unidades que varian desde 150 MW hasta 350 MW, entonces los ahorros economicos y de combustible serian impactantes. La presente ponencia mostrara un resumen de la metodologia a emplear para la realizacion de este tipo de proyectos.

  1. A Comparative Economic Analysis of North-Central New Mexico. New Mexico Agricultural Experiment Station Research Report 211.

    Science.gov (United States)

    Carruthers, Garrey E.; Eastman, Clyde

    North-Central New Mexico has many of the problems common to other rural areas. Unemployment and underemployment rates tend to be high and per capita income relatively low. This study evaluated regional economic performance over a 19-year period (1949-1968) as compared to other regions and the nation. Shift analysis (a means of examining regional…

  2. "La ciencia de los ingenieros..." en la primera mitad del siglo XVIII

    Directory of Open Access Journals (Sweden)

    Galindo Díaz, Jorge

    2000-06-01

    que, para algunos autores, es el primer gran tratado de la ingeniería moderna: La Science des Ingénieurs, escrito por Bernard Forest de Belidor, francés de origen catalán y profesor de matemáticas en la Escuela de Artillería de La Fére, miembro de las sociedades científicas de Londres y Prusia y corresponsal de la Academia Real de Ciencias de París. Con este libro se presentaría un rotundo cambio de dirección en dos aspectos fundamentales de la cultura técnica de los ingenieros modernos: el dimensionamiento de la estructura a partir de procedimientos numéricos y la organización de los procesos de los trabajos de construcción. En las páginas siguientes daré cuenta de los contenidos de este tratado consultado en su versión original y en su particular traducción castellana, no sin antes hablar del papel que cumplió en la disociación de dos profesiones que hasta entonces habrían de compartir actitudes y competencias: arquitectura e ingeniería, tal como se entendían desde los ya distantes años del Renacimiento cuando la durabilidad, la estabilidad y la solidez de un edificio, cualquiera que él fuera, estaban precedidas por una ejecución perfecta, por el uso de los materiales adecuados, y donde el dimensionado de las partes obedecía a un plan general de las proporciones del conjunto, ... de un buscado equilibrio de los elementos. Veremos cómo -con la ciencia de los ingenieros del siglo XVIII-todos estos principios deberán explicarse, entonces, atendiendo a razones de naturaleza algebraica, en el conocimiento de la mecánica y en la comprensión abstracta de los elementos estructurales. Vale la pena señalar que este trabajo es parte de una investigación mucho más amplia sobre las transformaciones del conocimiento técnico en el campo de la ingeniería y la arquitectura entre los siglos XVI y XVIII, en Europa y en América, haciendo especial hincapié en el papel que juegan las escuelas y academias, a uno y otro lado del océano.

  3. An early work [1910-1913] in Biological Psychology by pioneer psychiatrist, criminologist and philosopher José Ingenieros, M.D. (1877-1925) of Buenos Aires.

    Science.gov (United States)

    Triarhou, Lazaros C; del Cerro, Manuel

    2006-04-01

    One of the earliest recorded works in Biological Psychology was published in 1910 by Argentine psychiatrist José Ingenieros (1877-1925), Professor of Experimental Psychology at the Faculty of Philosophy and Letters of the University of Buenos Aires. Ingenieros, a multifaceted personality and prolific author and educator famous for his lapidary aphorisms, has been considered a 'luminary' for generations. Trained as a physician, he was the first scientist to establish a comprehensive psychological system in Latin America. His long list of publications includes more than 300 titles generally divided in two periods: studies in mental pathology and criminology (1897-1908) and studies in philosophy, psychology and sociology (1908-1925). His works were never made particularly available to English-speaking audiences, despite the fact that certain of his books are still best-sellers in the Spanish-speaking world. We present an overview of Ingenieros' life and work, and a detailed account of his profoundly interesting work Principios de Psicología Biológica, in which he analyzes the development, evolution and social context of mental functions. We also provide an English translation of the Introduction contributed by Nobel laureate Wilhelm Ostwald (1853-1932) to the 1922 German edition of the work, pertinent to the energetic principles Ingenieros used and the study of Psychology as a natural science. It is a hope, 80 years after Ingenieros' parting, to bibliographically resurrect this champion of reason, who, until now, has not been given his due placement in the international psychological and biomedical literature.

  4. La física y la cultura de la profesión del ingeniero informático

    OpenAIRE

    Salvador Bacilio Barberán Feria; José Sánchez Suárez; Rodolfo Valentín García Bermúdez

    2012-01-01

    Este artículo abordó la relación entre la Teoría de Maxwell para el electromagnetismo, tema de Física, y la asignatura Arquitectura de Computadoras, pues resulta fuente de cultura para la carrera de Ingeniería Informática. En este sentido se demostró la importancia de la ciencia Física en la formación inicial de este ingeniero, desde los principios físicos de la tecnología del funcionamiento de los periféricos de las máquinas computadoras, y su contribución a la formación ética profesional, l...

  5. Ingenieros españoles en la Ilustración (El Real Gabinete de Máquinas)

    OpenAIRE

    González, Ignacio

    2004-01-01

    La segunda mitad del siglo XVII fue una época fértil para el progreso de las diversas ramas de la tecnología y, de una manera m"DVpartiC..ldlar,para la ingeniería mecánica y la civil. Una de las innovaciones más notables de este período fue la creación del «Real Gabinete de Máquinas», en cuya génesis, organización y dirección tuvieron un papel destacado dos de los más grandes personajes de la Ilustración tardía, el ingeniero civil Agustín de Betancourt y Molina (Puerto de la Cr...

  6. La física y la cultura de la profesión del ingeniero informático

    Directory of Open Access Journals (Sweden)

    Salvador Bacilio Barberán Feria

    2012-01-01

    Full Text Available Este artículo abordó la relación entre la Teoría de Maxwell para el electromagnetismo, tema de Física, y la asignatura Arquitectura de Computadoras, pues resulta fuente de cultura para la carrera de Ingeniería Informática. En este sentido se demostró la importancia de la ciencia Física en la formación inicial de este ingeniero, desde los principios físicos de la tecnología del funcionamiento de los periféricos de las máquinas computadoras, y su contribución a la formación ética profesional, lo que cobra una profunda connotación social. Se argumenta la tesis expuesta a partir del ejemplo de la fotocopiadora.

  7. Characteristics of Aerosol Spectral Optical Depths over Manora Peak, Nainital $-$ A High Altitude Station in the Central Himalayas

    CERN Document Server

    Sagar, R; Dumka, U C; Moorthy, K K; Pant, P

    2003-01-01

    We present for the first time spectral behaviour of aerosol optical depths (AODs) over Manora Peak, Nainital located at an altitude of ~2 km in the central Himalayas. The observations were carried out using a Multi-Wavelength Solar Radiometer during January to December 2002. The primary features of the study are (i) larger AOD during afternoon periods compared to forenoon, attributable to change in the ray path from comparatively cleaner environment in the forenoon to polluted environment in the afternoon (ii) extremely low AODs during local winter and a remarkable increase to high values in summer (iii) a distinct change in the spectral dependencies of AODs from a relatively steeper spectra during winter to a shallower one in summer representing both transparent (meteorological aerosols) and polluted summer (urban haze aerosols) skies.The mean aerosol extinction law at Nainital during 2002 is best represented by $0.10 \\lambda^{-0.61}$.

  8. Automation system at Kitami centralized control station of Hokkaido Electric Power Co. Ltd.; Hokkaido denryoku (kabu) Kitami shuchu seigyosho jidoka system

    Energy Technology Data Exchange (ETDEWEB)

    Tsuruma, T.; Tatekoji, T.; Dobashi, K. [Hokkaido Electric Power Co. Inc., Sapporo (Japan); Nakamura, T.; Manabe, Y. [Meidensha Corp., Tokyo (Japan)

    1994-09-16

    This paper introduces the summary of the automation system at Kitami Centralized Control Station of Hokkaido Electric Power Co., Ltd. The system has been discussed to apply a more excellent function-dispersed system that can amalgamate the latest opening techniques, and comply with the trend of up-scaling and more complication of the power systems. The system is a large-scale power automating system that integrates the power supply operations throughout the district in addition to the centralized monitoring and control of about 50 power plants and substations in the district. Further, the features of the function dispersed system are exhibited at a possible maximum extent, an operation system using automatic information service functions and graphical user interface was adopted, and the facilitation of operations was further improved. The system is a function-dispersed system that adopts the token ring LAN having excellent real-time performance in the process system, uses the Ethernet in the man-machine system, and couples the processors divided into function units organically with each other. The main devices are duplicated to execute the system operation factor and the data continuity at the maximum level. 2 figs., 1 tab.

  9. Modeling of soil water content and soil temperature at selected U.S. and central European stations using SoilClim model

    Science.gov (United States)

    Hlavinka, P.; Trnka, M.; Balek, J.; Zalud, Z.; Hayes, M.; Svoboda, M.; Eitzinger, J.

    2009-04-01

    Within the presented study the SoilClim model was tested through various climatic and soil conditions. SoilClim model enables to estimate reference and actual evapotranspiration from defined vegetation cover and consequently the soil water content within two defined layers (named as Moisture control section I and II) could be deduced. The soil temperature in 0.5 m depth is also estimated (on the basis of simple empirical model). Mentioned outputs could be additionally used for identification of soil climate regimes (both Hydric and Thermic) within selected location. The SoilClim works in daily step and needs daily maximum and minimum air temperature, global radiation, precipitation, air humidity and wind speed as input. The brief information about soil layers (field capacity, wilting point, depth) and vegetation cover is necessary. The algorithm for reference evapotranspiration is based on Penman-Monteith method. The main aim of the study was to assess accuracy and suitability of the SoilClim for simulation of soil water content in the two defined layers and temperature in 0.50 m depth. For this purpose the seven stations through central U.S. were selected (by twos from Nebraska, Iowa and Kansas and one from South Dakota). Used measurements were observed from 2004 to 2008. The central European region was represented by Austrian Lysimetric station Gross-Enzersdorf. The data within three different soil profiles and for various crop covers (spring barley, winter wheat, maize and potato) from 1999 to 2004 were used. During introduced reserch SoilClim provided reasonable results of soil moisture for both layers against lysimetric measurements. Agreement between measured and estimated water content (30 days averages) could be described by coefficient of determination (R2) which varied from 0.45 to 0.75. The Mean Bias Error (MBE) for values in daily step was from -12.87 % to 20.66 % and Root Mean Square Error (RMSE) varied from 14.49 % to 34.76 %. The modeling efficiency

  10. 污水源热泵中心能源站设计研究%Design of central energy station with sewage source heat pump

    Institute of Scientific and Technical Information of China (English)

    杨灵艳; 朱清宇; 路宾; 沈亮

    2012-01-01

    作为区域能源中心,污水源热泵中心能源站的设计特点与小型污水源热泵系统设计不同,设计过程中要从安全性、经济性和节能性进行综合考虑.以一个实际污水源热泵站项目为例,探讨了大型污水源热泵站设计过程中,污水侧低温热源、外网布置、机组配置、用户侧末端设置等值得注意的相关问题,总结了污水源热泵站的设计特点.并将实际项目与传统的电制冷加锅炉供热方式进行比较,其经济性、节能环保效果十分显著.%As a district energy centre, the station is different from a small-scale one in design characteristics, requiring that the safety, cost-effectiveness and energy efficiency be comprehensively considered during the designing. Based on a practical project, discusses several noteworthy points including the low temperature heat source in the sewage side, heat/cold supply network arrangement, units configuration, user-side terminal settings, etc., and summarizes the design characteristics of the central station. Compares it with the traditional HVAC systems in the mode of power-driven refrigeration plus boiler heating, showing that it is more advantageous in the effects of economics, environmental protection and energy efficiency.

  11. Adaptation of Korean rice cultivars under PhilRice, Nueva Ecija Central Experiment Station's agro-climatic conditions

    International Nuclear Information System (INIS)

    Agro-climatic conditions are very vital for growth and development of rice plants. Rice cultivars that were not bred and developed in the Philippines must be properly screened and tested to identify genotypes that will adapt to its new environment. Nine Korean and 3 Philippine rice cultivars were planted at the Philippine Rice Research Institute Central Experiment Station from 2011 dry season to 2013 wet season. The main objective is to test, identify, and recommend Korean rice cultivars adapted to Philippine conditions. Weather data such as solar duration and radiation, relative humidity, rainfall, and temperature generated from Automatic Weather Station (AWS) were used to study the response of Korean and Philippine cultivars. Other data includes plant height, days to 50% flowering and yield. Results showed that there were differences among the cultivars in plant height which ranged from 2.4-14.9 cm. Variation in days to 50% flowering were also observed. Yield also varied but was greater during dry season compared to wet season. Plant height was affected by relative humidity and rainfall especially during sowing and transplanting. During panicle initiation, relative humidity had greater influence on plant height. Other weather parameters such as temperature, solar radiation and duration had negative correlation with plant height. On the other hand, flowering was delayed due to low solar radiation and high rainfall. High correlation was observed between maturity and relative humidity especially during sowing and transplanting. Yield was correlated with solar duration and radiation. Dasanbyeo, Milyang 23, Hanareumbyeo, Hangangchai 1, and Saegyejinmi were identified most adapted Korean cultivars under Nueva Ecija climatic conditions

  12. Set-up and calibration of an outdoor nozzle-type rainfall simulator for soil erosion studies at the Masse experimental station (central Italy)

    Science.gov (United States)

    Vergni, Lorenzo; Todisco, Francesca

    2016-04-01

    This contribution describes the technical characteristics and the preliminary calibration of a rainfall simulator recently installed by the Department of Agricultural, Food and Environmental Sciences (Perugia University) at the Masse experimental station located 20 km south of Perugia, in the region of Umbria (central Italy). The site includes some USLE plots of different length λ = 11 and 22 m and width w = 2, 4 and 8 m, oriented parallel to a 16 % slope and kept free of vegetation by frequent ploughing. Since 2008, the station enabled to collect data from more than 80 erosive events, that were mainly used to investigate the relationship between rainfall characteristics and soil loss. The relevant soil loss variability that characterizes erosive storm events with similar overall characteristics (duration and/or depth) can be explained by the different rainfall profile of erosive storms and by the different antecedent soil aggregate stability. To analyse in more detail these aspects, recently, the Masse experimental station has been equipped with a semi-portable rainfall simulator placed over two micro-plots of 1x1 m each, having the same topographic and pedologic conditions of the adjacent USLE plots. The rainfall simulator consists of four full-cone spray nozzles for each micro-plot, placed at the angles of a 0.18-m square, centred over the plot at a height of 2.7 m above the ground. The operating pressure is regulated by pressure regulating valves and checked by pressure gauges mounted in correspondence of each nozzle. An electronic control unit regulates the start and stop of the inlet solenoid valves. A range of rainfall intensities can be achieved, by activating different combinations of nozzles (15 different intensities) also during the same simulation trial. The particular design of the plots allows to collect separately the runoff volume deriving from the plots and the water volume fallen outside of the plot. In this way it is possible to derive, by

  13. Stations for an innovative transport system. The halts on the Munich central station - airport Maglev link; Innovative Stationen fuer ein innovatives Verkehrssystem. Die 'Bahnhoefe' der Magnetschnellbahn Muenchen Hauptbahnhof - Flughafen

    Energy Technology Data Exchange (ETDEWEB)

    Marscholek-Uecker, K. [DB Magnetbahn GmbH, Muenchen (Germany)

    2007-07-01

    The maglev system in Munich calls for the creation of superior kinds of station and station environment. To that end, a design and service concept together with requirements for the DB AG specifications and naturally also the necessary planning and approval procedures have been put together. What stands out in the project, however, is the all-encompassing design concept for rolling stock and stations, aimed at creating a coherent product for the customer. The objective is for the journey to be one single harmonious experience form end to end, encompassing the rolling stock, stations and surroundings. (orig.)

  14. Formación encadenada de técnicos, tecnólogos e ingenieros en telecomunicaciones / Formation tied of technicians, technologists and engineers in telecommunication

    Directory of Open Access Journals (Sweden)

    Guillermo Echeverri Jiménez

    2007-01-01

    Full Text Available En la formación de técnicos, tecnólogos e ingenieros se ha diagnosticado lo siguiente: no existen encadenamientos entre estos niveles. La formación de técnicos, tecnólogos e ingenieros se confunde. Y existe un imaginario social: la formación técnica es para pobres. Esta situación afecta el desarrollo del país en dos sentidos: se ahonda el estado de dependencia tecnológica; se abre más la brecha socioeconómica, en tanto los técnicos no tienen un reconocimiento acorde con la importancia de su labor, o los ingenieros son mal remunerados por, supuestamente, hacer lo mismo que hace un técnico. Esta Propuesta es una alternativa de solución a la problemática planteada. Se propone un programa que articula la formación de técnicos, tecnólogos e ingenieros, desde una perspectiva integral, investigativa, flexible y por competencias.In the formation of technicians, technologists and engineers the following thing has been diagnosed: linking between these levels does not exist. The formation of technicians, technologists and engineers is confused. And a social one exists imaginary: the technical formation is for poor men. This situation affects the development of the country in two-way traffic: the state of technological dependency goes deep; he opens himself plus the socioeconomic breach, in as much the technicians they do not have an agreed recognition with the importance of his work, or the engineers badly are remunerated by, supposedly, doing just like a technician does.

  15. Subsoil TPH and other petroleum fractions-contamination levels in an oil storage and distribution station in north-central Mexico.

    Science.gov (United States)

    Iturbe, Rosario; Flores, Carlos; Flores, Rosa Ma; Torres, Luis G

    2005-12-01

    Many oil industry related sites have become contaminated due to the activities characteristic of this industry, such as oil exploration and production, refining, and petro-chemistry. In Mexico, reported hydrocarbon spills for the year 2000 amounted to 185203, equivalent to 6252 tons (PEMEX, 2000). The first step for the remediation of these polluted sites is to assess the size and intensity of the oil contamination affecting the subsoil and groundwater, followed by a health risk assessment to establish clean up levels. The aim of this work was to characterize the soil and water in a north-central Mexico Oil Storage and Distribution Station (ODSS), in terms of TPHs, gasoline and diesel fractions, BTEX, PAHs, MTBE, and some metals. Besides, measurements of the explosivity index along the ODSS were made and we describe and discuss the risk health assessment analysis performed at the ODSS, as well as the recommendations arising from it. Considering soils with TPH concentrations higher than 2000 mg kg(-1), the contaminated areas corresponding to the railway zone is about 12776.5 m2, to the south of the storage tanks is about 6558 m2, and to the south of the filling tanks is about 783 m2. Total area to be treated is about 20107 m2 (volume of 20107 m3), considering 1m depth. PMID:15963553

  16. Impacto de las estancias profesionales en la formación del Ingeniero Químico

    Directory of Open Access Journals (Sweden)

    Maria Esther Aurora Contreras Lara Vega

    2015-05-01

    Full Text Available Este trabajo es el resultado de la evaluación de los reportes de las estancias profesionales de los estudiantes del Programa Educativo de Ingeniero Químico, de las generaciones 2001-06 a 2006- 2011, para identificar las principales funciones que desempeñan en sus estancias profesionales, las áreas donde se insertan y el sector que los contrata. La información recabada de las estancias profesionales es un indicador del grado de pertinencia del currículo del programa. Se determinó que 82 % de los alumnos se colocaron en industrias y áreas que tienen que ver con su perfil profesional de egreso; destacan las áreas de calidad, ingeniería aplicada y servicios, y la de seguridad, higiene y protección ambiental. Se identificó que los alumnos desempeñan principalmente actividades propias de su formación y se reconocieron áreas de oportunidad como la de mejorar las habilidades de comunicación oral y escrita y el manejo de equipos de laboratorio especializados

  17. Aspectos climatológicos en las obras de funcionarios reales e ingenieros militares del siglo XVIII hispanoamericano

    Directory of Open Access Journals (Sweden)

    Molina García, Juan Alberto

    2014-06-01

    Full Text Available In the Eighteenth century, royal officials and military engineers achieved a considerable knowledge of American climates and their links with several subjects of natural and social reality. They remained long periods at the Hispanic colonies and the governments commended them the wholeness of the Empire and the resolution of many business connected to climate. Their research procedures were base on the collective action, as well as on the division of tasks.En el siglo XVIII, los funcionarios reales y los ingenieros militares alcanzaron un considerable conocimiento de los climas americanos y de sus vínculos con aspectos de la realidad natural y social. Permanecieron durante largos períodos en las colonias hispánicas y los gobiernos les encomendaron la integridad del imperio y la resolución de asuntos relacionados con el clima. Sus procedimientos de indagación se basaron en la acción colectiva, así como en la división de tareas.

  18. El color y su significado en los documentos cartográficos del Cuerpo de Ingenieros Militares del siglo XVIII

    Directory of Open Access Journals (Sweden)

    Margarita San Andrés Moya

    2009-08-01

    Full Text Available Los Documentos Cartográficos del Cuerpo de Ingenieros Militares del s. XVIII y las fuentes documentales asociadas a su ejecución tienen un gran interés histórico, artístico y cultural. En este artículo se analizan las fuentes relacionadas con las técnicas, los materiales y sus formas de aplicación. Se describen los pigmentos y colorantes recogidos en los distintos tratados relacionados con este arte, especialmente los referidos a la técnica del lavado, en los que, además, se hace referencia a los códigos de color según el elemento representado, el orden o secuencia de trabajo y las mezclas de colores. Puesto que se trata de documentos que en aquella época tuvieron una función eminentemente práctica, en su ejecución se seguían unas pautas determinadas, que permitían normalizar su lectura e interpretación. Desde la perspectiva de la Conservación-Restauración, la documentación estudiada aporta una información significativa relacionada con los materiales sobre los que se intervienen, la detección de procesos de degradación y la autentificación de documentos.

  19. Heat transfer equipment performance diagnosis of auxiliary systems in electric power stations; Diagnostico de comportamiento de equipo de transferencia de calor de sistemas auxiliares de centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz Esparza Gutierrez, Rogelio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1990-12-31

    In this article the methodology followed to diagnose the performance of the equipment where heat is transferred from the feed water, condensate and circulation water systems in fossil power plants (FPP). The data collection is made with the unit in normal operation, using local instrumentation without taking the equipment out of service for its installation. The equipment diagnosis is made through the analysis of the collected data in actual operation and the design data; for this purpose a thermal balance of the interested systems is performed to obtain all the conditions an operation data. Later on the performance indicative parameters (PIP) of actual operation and design are calculated and compared one against the other. Such a comparison reveals the performance deterioration and the possible equipment faults. The data obtained and the supplementary information are stored in a data base whose objective is that Comision Federal de Electricidad has on hand a prompt access to them in order to control the performance, compare them among similar units and power stations, and inclusively verify possible recurrent causes of low availability in the referred systems. [Espanol] En este articulo se presenta la metodologia seguida para diagnosticar el comportamiento de equipos en los que se transfiere calor de los sistemas de agua de alimentacion, condensado y circulacion de las centrales termoelectricas (CTE). La toma de datos se realiza con la unidad en operacion normal, utilizando instrumentacion local sin necesidad de sacar de servicio a los equipos para su instalacion, ya que se ocupan los mismos puntos para instrumentos con que cuentan por diseno. El diagnostico de los equipos se realiza mediante el analisis de los datos recopilados, tanto de operacion real como de diseno; para ello, se efectua un balance termico de los sistemas de interes para obtener todas las condiciones y los datos de operacion. Posteriormente, se calculan los parametros indicativos de

  20. ARRA-funded VS30 measurements using multi-technique approach at strong-motion stations in California and central-eastern United States

    Science.gov (United States)

    Yong, Alan; Martin, Antony; Stokoe, Kenneth; Diehl, John

    2013-01-01

    Funded by the 2009 American Recovery and Reinvestment Act (ARRA), we conducted geophysical site characterizations at 191 strong-motion stations: 187 in California and 4 in the Central-Eastern United States (CEUS). The geophysical methods used at each site included passive and active surface-wave and body-wave techniques. Multiple techniques were used at most sites, with the goal of robustly determining VS (shear-wave velocity) profiles and VS30 (the time-averaged shear-wave velocity in the upper 30 meters depth). These techniques included: horizontal-to-vertical spectral ratio (HVSR), two-dimensional (2-D) array microtremor (AM), refraction microtremor (ReMi™), spectral analysis of surface wave (SASW), multi-channel analysis of surface waves (Rayleigh wave: MASRW; and Love wave: MASLW), and compressional- and shear-wave refraction. Of the selected sites, 47 percent have crystalline, volcanic, or sedimentary rock at the surface or at relatively shallow depth, and 53 percent are of Quaternary sediments located in either rural or urban environments. Calculated values of VS30 span almost the full range of the National Earthquake Hazards Reduction Program (NEHRP) Site Classes, from D (stiff soils) to B (rock). The NEHRP Site Classes based on VS30 range from being consistent with the Class expected from analysis of surficial geology, to being one or two Site Classes below expected. In a few cases where differences between the observed and expected Site Class occurred, it was the consequence of inaccurate or coarse geologic mapping, as well as considerable degradation of the near-surface rock. Additionally, several sites mapped as rock have Site Class D (stiff soil) velocities, which is due to the extensive weathering of the surficial rock.

  1. Diffuse control of gas turbines in power stations of combined cycle; Contral difuso de turbinas de gas en centrales de ciclo combinado

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez P, Marino; Garduno R, Raul; De Lara J, Salvadror; Castelo C, Luis [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2001-07-01

    In this article the application of the technology of the fuzzy logic to the control of gas turbines is presented in order to evaluate it in one of the most difficult processes and with stricter control requirements that exist in the electrical generation industry. For being important for the generation electrical sector, given their use in Comision Federal de Electricidad (CFE), the first selected prototype was the gas turbines model W501 of Westinghouse, installed in the of combined cycle power stations of Dos Bocas, Veracruz, Gomez Palacio, Durango and Tula, Hidalgo, Mexico. The second selected prototype was the one of the turbo gas units type 5001 (that applies to the GE 5001 models and Westinghouse of series 191 and 251). Based on the analysis of the performance of the system of conventional control previously made, the controllers of speed and generation of electrical power were selected to be replaced by diffuse controllers. [Spanish] En este articulo se presenta la aplicacion de la tecnologia de la logica difusa al control de turbinas de gas con el proposito de evaluarla en uno de los procesos mas dificiles y con requerimientos mas estrictos de control que existen en la industria de generacion electrica. Por ser importantes para el sector electrico de generacion, dada su utilizacion en Comision Federal de Electricidad (CFE), el primer prototipo seleccionado fueron las turbinas de gas modelo W501 de Westinghouse, instaladas en la central de ciclo combinado de Dos Bocas, Veracruz, Gomez Palacio, Durango y Tula, Hidalgo, Mexico. El segundo prototipo seleccionado fue el de unidades turbogas tipo 5001 (que aplica a los modelos GE 5001 y Westinghouse de la serie 191 y 251). Basados en el analisis del desempeno del sistema de control convencional realizado previamente, los controladores de velocidad y de generacion de potencia electrica fueron seleccionados para ser sustituidos por controladores difusos.

  2. Technological tendencies for the improvement of the performance of combined cycle power stations; Tendencias tecnologicas para el mejoramiento del desempeno de centrales de cilco combinado

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez P, Marino; Garduno R, Raul; Chavez T, Rafael [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2001-07-01

    In this article are dealt some the aspects that have turned the combined cycle generating power stations (CCGPS) into the dominant way for the electrical generation in the world. In the first part it is presented the plan of expansion of the national electrical generation and similar information that the U.S.A. has for the CCGPS, which will give an idea of the importance and the impact that has this technology at the moment. The basic characteristics that are necessary to specify in order to satisfy the environmental and operation requirements, and the available technologies to increase the global efficiency of the CCGPS are also exposed. Finally it describes the evolution of the technology of control for CCGPS developed in the Gerencia de Control e Instrumentacion (GCI), as well as the capacities available to support the electrical sector in this technological discipline. [Spanish] En este articulo se tratan algunos de los aspectos que han convertido a las centrales de generacion de ciclo combinado (CGCC) en el modo dominante para la generacion electrica en el mundo. En la primera parte se presenta el plan de expansion de la generacion electrica nacional e informacion similar que los EE.UU. tienen para las CGCC, lo que dara una idea de la importancia y del impacto que tiene actualmente esta tecnologia. Se exponen tambien las caracteristicas principales que es necesario especificar a fin de satisfacer los requerimientos ambientales y de operacion, y las tecnologias disponibles para incrementar la eficiencia global de las CGCC. Finalmente se describe la evolucion de la tecnologia de control para CGCC desarrollada en la Gerencia de Control e Instrumentacion (GCI), asi como las capacidades disponibles para apoyar al sector electrico en esta disciplina tecnologica.

  3. SNOW COVER OF THE CENTRAL ANTARCTICA (VOSTOK STATION AS AN IDEAL NATURAL TABLET FOR COSMIC DUST COLLECTION: PRELIMINARY RESULTS ON THE IDENTIFICATION OF MICROMETEORITES OF CARBONACEOUS CHONDRITE TYPE

    Directory of Open Access Journals (Sweden)

    E. S. Bulat

    2012-01-01

    Full Text Available During the 2010/11 season nearby the Vostok station the 56th Russian Antarctic Expedition has collected surface snow in a big amount from a 3 m deep pit using 15 220 L vol. containers (about 70 kg snow each. Snow melting and processing by ultra-centrifugation was performed in a clean (class 10 000 and 100 laboratory. Total dust concentrations were not exceeded 37.4 mkg per liter with particle dispersal mode around 2.5 mkm. To analyze the elemental composition of fine dust particles aimed to reveal Antarctic micrometeorites (AMM two electron microscopy devices equipped with different micro-beams were implemented. As a preliminary result, three particles (of 107 analyzed featured by Mg content clearly dominated over Al along with Si and Fe as major elements (a feature of carbonaceous chondrites were observed. By this the Vostok AMM CS11 collection was established. The occurrence of given particles was averaged 2.8% – the factual value obtained for the first time for chondritic type AMM at Vostok which should be considered as the lowest estimate for all other families of AMM. Given the reference profile of total dust content in East Antarctic snow during Holocene (18 mkg/kg the MM deposition in Antarctica was quantified for the first time – 14 tons per day for carbonaceous chondrites for the Vostok AMM CS11 collection and up to 245 tons per day for all MM types for the Concordia AMM DC02 collection. The results obtained allowed to prove that snow cover (ice sheet in total of Central East Antarctica is the best spot (most clean of other natural locations and always below 0 ºC for collecting native MM deposited on the Earth during the last million years and could be useful in deciphering the origin and evolution of solid matter in our Solar System and its effects on Earth-bound biogeochemical and geophysical processes including the life origin. The farther analyses of the Vostok AMMs are in a progress.

  4. Análisis de ruido en áreas de la central termoeléctrica Habana. // Noise analysis in the Habana thermoelectrial power station areas.

    Directory of Open Access Journals (Sweden)

    L. Felipe Sexto

    2002-09-01

    Full Text Available El trabajo aborda los aspectos más significativos que se derivan de las mediciones de ruido efectuadas en áreas de laCentral Termoeléctrica Habana, en enero del 2000, realizando una caracterización del paisaje sonoro inherente a la sala demáquinas dónde se encuentran en explotación tres grupos de turbogeneradores de 100 MW cada uno. También se ofrecenlos resultados en otras zonas importantes de la planta. Se exponen las emisiones características de algunos equipos bajocondiciones de campo directo y reverberante. Además, se valoran algunos riesgos que afectan al personal expuesto y semencionan acciones necesarias para contrarrestar los efectos de la contaminación sonora. Entre los parámetros empleadospara la evaluación del ruido se hallan el nivel sonoro con ponderación AF, el nivel sonoro continuo equivalente, los valoresmáximo y mínimo, el análisis de frecuencias, el tiempo de exposición y el índice NR (noise rating curves. También, setratan criterios y recomendaciones dadas por ISO, EPA y NIOSH.Palabras claves: Ruido, contaminación, salud, turbogenerador, medición de ruido.___________________________________________________________________AbstractThe work approaches the most significant aspects that are derived from the conducted noise measurements in areas of theThermoelectrial Power station Habana, and a characterization of the inherent sonorous landscape in the engine room wherethree groups of turbogenerators of 100 MW each are in operation. Also the results in other important zones of the plant areoffered. The transmissions characteristic of some equipment under conditions of direct and reverberante field are exposed.In addition, some risks that affect the exposed personnel and actions necessary to resist the effects of the sonorouscontamination are mentioned. Between the parameters used for the noise evaluation are the sonorous level withponderación AF, the equivalent continuous sonorous level, the maximum and

  5. 考虑削峰填谷的配电网集中型充电站选址定容规划%Locating and Sizing of Centralized Charging Stations in Distribution Network Considering Load Shifting

    Institute of Scientific and Technical Information of China (English)

    所丽; 唐巍; 白牧可; 张璐

    2014-01-01

    采用电池租赁和建立集中型充电站是电动汽车产业具有竞争力的发展模式。根据规划区各类型电动汽车日行驶距离概率分布,建立了电动汽车日换电需求模型。以此为基础,将集中型充电站的规划与配电网调度相结合,建立了考虑削峰填谷作用的集中型充电站选址定容二层规划模型。利用改进遗传算法与自适应粒子群相结合的混合智能算法进行求解,并将加权伏罗诺伊图应用于集中型充电站服务区域的划分,实现了集中型充电站负载率的均衡。通过仿真算例验证了所提模型和方法的有效性和可行性。%Leasing batteries and establishing centralized charging stations are the future competitive development orientations in electric vehicle industry. Based on driving distance probability distribution of various electric vehicles obtained by statistical analysis, an uncertainty model of electric vehicle battery replacement demand is established. Considering the investment of centralized charging stations and lines, network loss and load shifting, a planning model for centralized charging stations is put forward. The hybrid intelligent optimization method, which combines the improved genetic algorithm with the self-adaptive particle swarm algorithm, is used to solve the above two layer programming models. The service area is divided by the weighted Voronoi diagram in order to balance the load rates of centralized charging stations. The simulation results show that the proposed model and method are effective and feasible for centralized charging station planning.

  6. Angiolo Mazzoni Del Grande, ingeniero italiano en Colombia y las propuestas para una teoría de la restauración arquitectónica

    OpenAIRE

    Olimpia Niglio

    2015-01-01

    La cultura de la restauración de la arquitectura en Colombia comenzó a manifestarse en la segunda mitad del siglo xx, cuando el arquitecto Carlos Arbeláez Camacho, profesor de la Universidad Nacional de Colombia, instituyó los primeros cursos de historia colombiana del arte. En marzo de 1948, llegó a la misma Universidad el ingeniero italiano Angiolo Mazzoni Del Grande para iniciar, en un primer momento, los cursos de Composición y Urbanismo y, luego, los cursos de Historia de las construccio...

  7. La ingeniería legal en la formación del ingeniero y la contratación estatal en ingeniería

    OpenAIRE

    Fernando Guzmán Castro; Leonardo Latorre Chacón

    2011-01-01

    En la Facultad de Ingeniería de la Universidad Nacional de Colombia, sede Bogotá, se ha ofrecido desde hace mucho tiempo la asignatura Ingeniería Legal, que conceptualiza los puntos de convergencia entre el ejercicio de la ingeniería y los aspectos legales vigentes en el país. Inicialmente el ilustre ingeniero Alfredo Bateman, y más adelante los autores del artículo han dirigido el curso que se ha dictado para todas las especialidades de ingeniería. Al comienzo del presente artículo se descri...

  8. Atmospheric pollution from power stations: current situation and prospects with regard to legislation. Contaminacion atmosferica de las centrales termicas: situacion actual y perspectivas legislativas

    Energy Technology Data Exchange (ETDEWEB)

    Castiella Villacampa, E.; Asuar Alonso, O.

    1989-11-01

    The monitoring of emissions into the atmosphere from thermal power plants is of vital importance. The recently published Board Directive of 24 November 1988 is therefore one step further towards the protection of the environment. As a consequence, power stations need to make a great effort to adapt. We have also seen that power stations have the technology to quantify their emissions and that they appear to have sufficient time available to reduce them. 5 refs., 3 figs., 1 tab.

  9. Possibilities and limitations of analogue methods for studying the dynamics of nuclear power stations; Possibilites et limitations du calcul analogique pour les etudes dynamiques de centrales nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Caillet, C.; Deat, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    1. Introduction: the present paper is devoted to analog simulation of problems related to nuclear reactors other than the simulation of the kinetic equations which is well known. 2. Thermodynamic problems: various problems relative to temperature evolution in a reactor, in a pipe, in an exchanger, in a turbine, are studied, and simulation techniques used by earlier authors are critically reviewed. 3. Pipe simulators: it is shown that this problem can be solved by the use of specialized simulators which will be described and analysed. 4. Rotating machine simulators: the particular aspect of rotating machine calculations introducing frequent use of diagrams is emphasized. A simulator requiring both digital and analogue methods is described. 5. The study of a nuclear power station: as an example it is proposed to discuss problems a rising in connection with the preceding elements (a, b, c, d) when simulating the behaviour of large nuclear plants. The part played by ordinary computing elements for the simulation of the different servomechanism transfer functions is considered and process of regulation is outlined. 6. Conclusion: the necessity of the use of high quality simulators and computers is underlined and the accuracy of the solutions is discussed. (author)Fren. [French] 1. Cinetique des reacteurs: la simulation des equations cinetiques d'un reacteur nucleaire ne pose desormais plus de probleme. II est donc possible de faire le point des differentes applications de la technique analogique dans ce domaine. 2. Les problemes thermodynamiques: on discute les differents problemes poses par l'evolution des temperatures dans un reacteur, dans une tuyauterie, dans un echangeur, dans une turbine, et on passe en revue les techniques de simulation proposees jusqu'a ce jour. 3s simulateurs de tuyauteries: on montre comment les differents problemes poses ci-dessus peuvent etre resolus, pour une classe tres vaste de reacteurs par l'emploi de simulateurs

  10. The seismic station history of the central exploration institute of geology%中央地质调查所所属地震台站历史变迁

    Institute of Scientific and Technical Information of China (English)

    侯江

    2015-01-01

    During the period of the Republic of China,the central exploration institute of geology built three seismic stations one after another in Beijing,Chongqing and Nanjing.The first seismic station was built by Xishan and called Jiufeng Seismic Station in Beiping (now Beijing)in 1930.It is the first seismic station built by Chinese in modern history of China.In 1943 the Beipei Seismic Station was built in Chongqing and then a modern seismic in-strument was designed by Chinese and was called Ling style seismometer.In 1946 China Nanjing Shuijing Seismic Station began its operation.Three seismic stations built by the central exploration institute of geology in different pe-riods respectively mark the beginning of Chinese modern seismology and is of very important value.%民国时期,中央地质调查所在北京、重庆、南京先后建立地震台,三地的地震台有新建、有迁建,而皆一脉相承。1930年在北平(北京)西山创建鹫峰地震台,这是近代中国人自建的第一个地震台;1943年在重庆北碚建成北碚地震台,并研制成功中国人自制的第一台现代地震观测仪器———霓式地震仪;1946年在南京恢复地震台工作,建立中国南京水晶台地震台。中央地质调查所各个时期建立的地震台站所做的开创性工作,在中国近代地震科学发展史上有着举足轻重的作用。

  11. Ingenieros del siglo XXI: importancia de la comunicación y de la formación estratégica en la doble esfera educativa y profesional del ingeniero

    Directory of Open Access Journals (Sweden)

    Martín, Ana M.ª

    2008-08-01

    Full Text Available The rise of worldwide communication networks and information technologies have redefined the concept of education in all fields. In engineering, a new educational paradigm can be glimpsed where the development of generic skills is prioritized in the curriculum and professional training of university students and practitioners. Skills such as the ability to successfully communicate orally and in writing, to operate with a multidisciplinary perspective in decision-making and problem-solving, to work in teams, and to become involved in lifelong learning, among others. The relationship among communication, training and lifelong learning is a key point in the profile of the engineer in this century. The challenge for those who are committed to the new paradigm, both teachers and trainers in the private sector, is to be able to incorporate the three dimensions into the educational process, so that it contributes to a better preparation of the individual to perform in the workplace from a human and professional point of view.El nacimiento de las redes mundiales de comunicación y las tecnologías de la información han redefinido el concepto de la educación en todos los ámbitos. En el terreno de la ingeniería se vislumbra un nuevo paradigma educativo donde se prioriza el desarrollo de destrezas genéricas, entre las que destacan la habilidad para comunicarse eficazmente de forma oral y escrita, para funcionar con una perspectiva multidisciplinar en la toma de decisiones y la resolución de problemas, el énfasis en el trabajo colaborativo y la capacidad para involucrarse en un aprendizaje de por vida. La interrelación entre comunicación, aprendizaje y formación es un factor fundamental en el perfil del ingeniero del nuevo siglo. El desafío para quienes nos hallamos comprometidos con este paradigma –tanto docentes como formadores en el sector privado– está en saber integrar estas tres dimensiones en el proceso educativo, de tal modo que

  12. Automatic system of tests for control equipment in combined cycle power stations; Sistema automatico de pruebas para equipos de control en centrales de ciclo combinado

    Energy Technology Data Exchange (ETDEWEB)

    Martinez M, Miguel A; Flores L, Zenon; Delgadillo V, Miguel A; Gutierrez A, Ruben [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2001-07-01

    This article deals on the Automatic System of Tests, denominated PROBADOR, used by the Gerencia de Control e Instrumentation (GCI) of the Instituto de Investigaciones Electricas (IIE)for the accomplishment of dynamic tests in laboratory, to the systems of acquisition and control developed with the electronic line SAC-IIE that are installed in the Thermoelectric Power station of Combined Cycle (CTCC) of Dos Bocas, Veracruz and Gomez Palacio, Durango, Mexico. Also the architecture, the functions that are carried out in the equipment of the System of Acquisition and control (SAC) and in the personal computer (PC) that conforms it are described, as well as the methodology used for the development of the tests. The PC constitutes Interface Man-Machine (IMM) and in the SAC equipment the simulation of the processes is made (by means of the execution of algebraic-differential equations) in the compressor, combustion chamber, gas turbine, heat recuperators, steam turbines and condenser equipment that integrate a CTCC. The equations that are used are based in the thermodynamics, flow dynamics and heat transfer; they become attached to the real process with a margin of error that is estimated in 10%. Finally, the tendencies of the PROBADOR and the technical and economic advantages are described that it has provided for the improvement in the performance of the control systems, before different situations, with no need to have the real process. [Spanish] Este articulo versa sobre el Sistema Automatico de Pruebas, denominado PROBADOR, utilizado por la Gerencia de Control e Instrumentacion (GCI) del Instituto de Investigaciones Electricas para la realizacion de pruebas dinamicas en laboratorio, a los sistemas de adquisicion y control desarrollado con la linea electronica SAC-IIE que estan instalados en las Centrales Termoelectricas de Ciclo Combinado (CTCC) de Dos Bocas, Veracruz y Gomez Palacio, Durango, Mexico. Tambien se describen la arquitectura, las funciones que se llevan

  13. La formación de competencias informacionales en el ingeniero industrial / Industrial engineer information literacy training

    Directory of Open Access Journals (Sweden)

    Alvarez, Juan Carlos

    2016-04-01

    Full Text Available El artículo describe las propiedades estadísticas de la información, su importancia para la toma de decisiones y la necesidad incluir la alfabetización informacional como parte del proceso de enseñanza aprendizaje en las universidades. El objetivo de la investigación fue proponer acciones que lograran integrar los procesos de solución de problemas docentes y la búsqueda, evaluación y recuperación de la información que requiere su solución. Se emplearon como métodos el análisis documental y la sistematización teórica para la construcción de los fundamentos conceptuales que se proponen, la modelación de su estructura y componentes. Finalmente se aplicó un pre-experimento pedagógico para evaluar la efectividad de la propuesta desde la formación del ingeniero industrial en la Universidad de Camagüey. El resultado esencial de la investigación estuvo en las acciones propuestas, como síntesis de la solución de problemas docentes y de información, que posibilitaron las transformaciones operadas en el comportamiento informacional de los estudiantes. ABSTRACT The article describes the characteristics of information, its importance for making of decisions and the need of including information literacy as a focus of the teaching-learning process at the university. The aim was to devise activities capable of integrating academic solving problem and locating, accessing and retrieving the information needed for their corresponding solution. A theoretical framework is constructed on the basis of documents analysis and systematizing methods, modeling was used to devise the activities describing their structure and components. Finally, an experiment was carried out to evaluate the effectiveness of the proposal in training industrial engineers at the University of Camagüey. The findings include a set of activities that combines problem-solving with information management which in terms lead to improving students’ ability and

  14. Space Station

    Science.gov (United States)

    Anderton, D. A.

    1985-01-01

    The official start of a bold new space program, essential to maintain the United States' leadership in space was signaled by a Presidential directive to move aggressively again into space by proceeding with the development of a space station. Development concepts for a permanently manned space station are discussed. Reasons for establishing an inhabited space station are given. Cost estimates and timetables are also cited.

  15. Amtrak Stations

    Data.gov (United States)

    Department of Homeland Security — Updated database of the Federal Railroad Administration's (FRA) Amtrak Station database. This database is a geographic data set containing Amtrak intercity railroad...

  16. For largest space flexibility and largest energy efficiency. Modern room automation enables an open-space solution in the arched structures of the central railway station; Fuer groesste Raumflexibilitaet und hoechste Energieeffizienz. Moderne Raumautomation ermoeglicht Open-Space Loesung in den Buegelbauten des Berliner Hauptbahnhofs

    Energy Technology Data Exchange (ETDEWEB)

    Ottilinger, Werner [Sauter Deutschland, Freiburg im Breisgau (Germany)

    2013-05-15

    A feature of the central railway station in Berlin are the 46 meters high arched structures that span the railway station and accommodate more than 1,500 employees of the Deutsche Bahn AG (Berlin, Federal Republic of Germany). A total of 42,000 square meters of office space and a large business and conference center spread on twelve floors. Within the commissioning of this central railway station, this vast area should be designed technically variable in order to hold the time and cost as low as possible for the reconstruction or change of tenants.

  17. Leonardo da Vinci: Ingeniero

    OpenAIRE

    Contreras López, Miguel Ángel

    2016-01-01

    Leonardo comprendió y utilizó el auténtico método experimental un siglo antes de que Francis Bacon filosofase sobre él, y antes de que Galileo lo pusiese en práctica. Leonardo no escribió tratados metodológicos, pero en sus cuadernos de apuntes nos dejó esparcidas sus ideas. Decía que las matemáticas, la geometría y la aritmética, podían llegar a la certeza absoluta dentro de su propio ámbito, pues manejan conceptos mentales ideales de valor universal. En cambio, la verdadera ciencia (refirié...

  18. The Princess Elisabeth Station

    Science.gov (United States)

    Berte, Johan

    2012-01-01

    Aware of the increasing impact of human activities on the Earth system, Belgian Science Policy Office (Belspo) launched in 1997 a research programme in support of a sustainable development policy. This umbrella programme included the Belgian Scientific Programme on Antarctic Research. The International Polar Foundation, an organization led by the civil engineer and explorer Alain Hubert, was commissioned by the Belgian Federal government in 2004 to design, construct and operate a new Belgian Antarctic Research Station as an element under this umbrella programme. The station was to be designed as a central location for investigating the characteristic sequence of Antarctic geographical regions (polynia, coast, ice shelf, ice sheet, marginal mountain area and dry valleys, inland plateau) within a radius of 200 kilometers (approx.124 miles) of a selected site. The station was also to be designed as "state of the art" with respect to sustainable development, energy consumption, and waste disposal, with a minimum lifetime of 25 years. The goal of the project was to build a station and enable science. So first we needed some basic requirements, which I have listed here; plus we had to finance the station ourselves. Our most important requirement was that we decided to make it a zero emissions station. This was both a philosophical choice as we thought it more consistent with Antarctic Treaty obligations and it was also a logistical advantage. If you are using renewable energy sources, you do not have to bring in all the fuel.

  19. Modelación de la evolución de la levadura: un estudio de las prácticas sociales del ingeniero bioquímico

    OpenAIRE

    Arrieta, Jaime; Galicia, Adriana

    2005-01-01

    En éste artículo, hacemos un análisis de la interacción de estudiantes de ingeniería bioquímica en la construcción de lo exponencial a partir de la modelación de la evolución de levaduras en el laboratorio de microbiología, tomando como premisa que ésta actividad es una practica social que se realiza en comunidades de ingenieros bioquímicos. Nuestra atención se centra en la riqueza del papel discursivo de los actores y su interacción, ya que a través del discurso, los actores construyen, d...

  20. Visión panorámica actual del Ingeniero de Planta en el proceso de fabricación del cennento

    Directory of Open Access Journals (Sweden)

    Castilo Neyra, Percy B. R.

    1984-06-01

    Full Text Available The energy crisis and subsequent retraction of sales on the market have demanded a greater exigency in the productive aspect of cement, requiring lower production costs and making the quality of the product more appropriate to the nature of its use in construction. This article focuses on the perspectives which should be considered by the Plant Engineer in order to achieve these objectives. The importance and necessity of projecting the process to the characteristics of the end product are stressed, as well as the usefulness of an adequate knowledge of the raw materials. Other factors which could also be considered as work tools of the Plant Engineer are mentioned, always taking into consideration, however, the fact that their best use will basically depend on the criterion with which they are put to use, since each factory constitutes a different world of its own.

    La crisis energética y la subsecuente retracción de ventas en el mercado han demandado una mayor exigencia en el aspecto productivo del cemento, requiriéndose menores costos de producción y una mejor adecuación de la calidad del producto a las características de su empleo en obra. En este artículo se enfoca las perspectivas que debe considerar el Ingeniero de Planta para el logro de estos objetivos. Se destaca la importancia y necesidad de la proyección del proceso a las características del producto final, así como la utilidad de un conocimiento adecuado de las materias primas. Se mencionan otros factores que podrían considerarse igualmente como herramientas de trabajo para el Ingeniero de Planta, pero siempre bajo la consideración de que su mejor utilización dependerá fundamentalmente del criterio con que sean empleadas, por constituir cada fábrica un mundo diferente y particular.

  1. TPH and PAH concentrations in the subsoil of polyduct segments, oil pipeline pumping stations, and right-of-way pipelines from Central Mexico

    Science.gov (United States)

    Iturbe, Rosario; Castro, Alejandrina; Perez, Guillermina; Flores, Carlos; Torres, Luis G.

    2008-10-01

    For the year 1996, 366 incidents related with clandestine poaching of oil-products were reported in Mexico, 159 in 1997, and 240 in 1998. For the year 2003 (the most recently reported figure), there were 136 events. Petroleos Mexicanos (PEMEX), very concerned with the environmental agenda, has developed programs oriented to diminish contamination levels in all of its oil facilities. This work was aimed at characterizing zones around polyduct segments, pipelines, pumping stations, and right-of-way pipelines located in the center of Mexico. The TPH contaminated sites were, in decreasing order, polyduct km 39 + 150 > polyduct km 25 + 020 > Zoquital > Tepetitlan > Catalina > Venta Prieta > Ceiba. Most of the sampled points showed the presence of more than one of the 16 PAHs considered by USEPA as priority pollutants. Except point TEPE 2A, where no PAHs were detected, all the sampled points showed values from low to medium concentrations; however, values found at the sites did not exceed the limits according to the Mexican or the American legislation. The place with the largest contaminated area corresponded to the polyduct km 39 + 150, with 130 m2 and 260 m3 to be treated. The least contaminated area was that around the JUAN 4 point at Juandho station, with 20 m2 and 22 m3 of contaminated soil. The total area to be treated is about 230 m2 and 497 m3.

  2. Computerized system for the support of the predictive maintenance in thermoelectric power stations of Comision Federal de Electricidad; Sistema computarizado para el apoyo del mantenimiento predictivo en centrales termoelectricas de la Comision Federal de Electricidad

    Energy Technology Data Exchange (ETDEWEB)

    Aranda A, Segio; Garcia M, Raul; Poujol G, Francisco; Chairez C, Carlos; Dominguez M, Nely [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2002-07-01

    This paper describes the functionality of the Integral System of Information for the Diagnosis of Predictive Maintenance (SIIDMP) in the thermoelectric centrals, whose primary target is to give support to the personnel related with the maintenance and operation of the thermoelectric central to optimize the application of the inspection, maintenance and its associated costs. It is important to comment that in the generating power stations of Comision Federal de Electricidad (CFE) techniques and methodologies for the preventive and corrective maintenance are applied, in addition of which they count on electronic equipment of operation dedicated to the inspection and control of vibratory equipment. The architecture of the SIIDMP is of the client-server type and for its design and implantation Windows NT 4.0 was used as operating system, SQL Server 7.0 as server and manager of the database, Visual C++ for the programs of data mining, Vision Basic 6.0 for the codification of the application programs and Interface Man-Machine (IMM), the communication mechanism Open Data Base Connectivity (ODBC) to establish the connection with the different data sources, as well as libraries of symbols and graphs that were included in the interface of the user. The main objective of the SIIDMP is to take care of the own necessities on optimization, improvements and savings in the operation of the power stations. With systems like the SIIDMP, a reduction of the costs due to shutdowns by accidental failures of the main equipment is looked for, limiting the deterioration of the equipment, as well as to provide knowledge and aid to all the personnel who take part in the management of the operation and conservation of the facilities of the power station. [Spanish] Se describe la funcionalidad del Sistema Integral de Informacion para el Diagnostico de Mantenimiento Predictivo en las centrales termoelectricas (SIIDMP), cuyo objetivo principal es apoyar al personal relacionado con el

  3. 考虑集中型充电站定址分容的电网规划研究%Grid Planning Considering Capacity and Site of Large-scale Centralized Charging Stations

    Institute of Scientific and Technical Information of China (English)

    高赐威; 张亮; 薛飞; 刘红超

    2012-01-01

    The battery swapping scheme together with pricing with mile counting and large-scale centralized charging is a competitive way for the development of electric vehicle industry. Although a large-scale centralized charging station has significant effects on the power system operation, it lacks of theoretical guidance for its planning. The scheme of "centralized charging, unified distribution" was introduced. Considering power grid and traffic network, a planning model which aims to decide the capacity and site choice of a large-scale centralized charging station was established. The effectiveness of this model was tested by the comparison of several alternatives. Sensitivity analysis was made with reference to the new lines' transmission capacity and the candidate station's land price, which were proved to be the key factors for the selection of centralized charging stations' sites and capacity allocating.%采用基于里程计费的换电池模式和建立规模庞大的集中型充电站是电动汽车产业具有竞争力的发展模式。集中型充电站作为功率巨大的负荷对电力系统运行影响较为显著,但是其规划问题当前缺乏相应的理论指导。简要介绍了“集中充电、统一配送”的运营模式,针对集中型充电站接入的电网规划问题,综合考虑电力网络和交通网络因素,建立了集中型充电站的定址分容模型,通过方案比较验证了模型的有效性,并从新建线路传输容量和待选站址地价2方面对模型进行了灵敏度分析,结果表明二者均为影响集中型充电站定址分容的关键因素。

  4. Control of a deareador level of a thermoelectric power station using modern control techniques; Control de nivel de un deareador de una central termoelectrica utilizando tecnicas de control moderno

    Energy Technology Data Exchange (ETDEWEB)

    Chavez Estrada, Jose Israel

    1997-01-01

    The present work shows the implementation of the scheme of predictive control IMC (Internal Model Control) in order to control the level of the deareador of a combined cycle thermoelectric power station of (C.C.T.S.). The implementation has the purpose of looking for alternative strategies of control to the classic ones (PID`s) that more efficiently control the variables of interest, in addition to getting into the new control techniques of control. Following the philosophy of predictive control IMC the form to applying this technique is shown, as well as the implementation of this type of controllers. A comparison of predictive control IMC is made with the scheme of conventional control (three control elements PID`s ) used at present to control the level of the deareador in the Combined Cycle Thermoelectric Power stations of Dos Bocas, Veracruz, Mexico and of Gomez Palacio, Durango, Mexico. [Espanol] El presente trabajo muestra la implementacion del esquema de control predictivo IMC (Control con Modelo Interno) con el objeto de controlar el nivel del deareador de una Central Termoelectrica de Ciclo Combinado (C.T.C.C.). La implementacion tiene la finalidad de buscar estrategias de control alternas a las clasicas (PID`s) que controlen mas eficientemente la variable de interes, ademas de incursionar en las nuevas tecnicas de control. Siguiendo la filosofia del control predictivo IMC se muestra la forma de aplicar esta tecnica, asi como la implementacion de este tipo de controladores. Se hace una comparacion del control predictivo IMC con el esquema de control convencional (control de tres elementos PID`s) utilizando actualmente para controlar el nivel del deareador en las centrales termoelectricas de ciclo combinado de Dos Bocas, Veracruz y de Gomez Palacio, Durango en Mexico.

  5. Integrated plant safety assessment: systematic evaluation program. Oyster Creek nuclear generating station. GPU Nuclear Corporation and Jersey Central Power and Light Company. Docket No. 50-219

    International Nuclear Information System (INIS)

    The Systematic Evaluation Program was initiated in February 1978 by the US Nuclear Regulatory Commission to review the designs of older operating nuclear reactor plants to reconfirm and document their safety. The review provides (1) an assessment of how these plants compare with current licensing safety requirements relating to selected issues, (2) a basis for deciding on how these differences should be resolved in an integrated plant review, and (3) a documented evaluation of plant safety. This report documents the review of the Oyster Creek Nuclear Generating Station (located in Ocean County, New Jersey), one of ten plants reviewed under Phase II of this program, and indicates how 137 topics selected for review under Phase I of the program were addressed. Equipment and procedural changes have been identified as a result of the review. It is expected that this report will be one of the bases in considering the issuance of a full-term operating license in place of the existing provisional operating license

  6. Mercury in the snow and firn at Summit Station, Central Greenland, and implications for the study of past atmospheric mercury levels

    Directory of Open Access Journals (Sweden)

    X. Faïn

    2008-07-01

    Full Text Available Gaseous Elemental Mercury (Hg° or GEM was investigated at Summit Station, Greenland, in the interstitial air extracted from the perennial snowpack (firn at depths ranging from the surface to 30 m, during summer 2005 and spring 2006. Photolytic production and destruction of Hg° were observed close to the snow surface during summer 2005 and spring 2006, and we observed dark oxidation of GEM up to 270 cm depth in June 2006. Photochemical transformation of gaseous elemental mercury resulted in diel variations in the concentrations of this gas in the near-surface interstitial air, but destruction of Hg° was predominant in June, and production was the main process in July. This seasonal evolution of the chemical mechanisms involving gaseous elemental mercury produces a signal that propagates downward through the firn air, but is unobservably small below 15 m in depth. As a consequence, multi-annual averaged records of GEM concentration should be well preserved in deep firn air at depths below 15 m, and available for the reconstruction of the past atmospheric history of GEM over the last decades.

  7. Vínculo lenguaje-contexto y su importancia para la comunicación del futuro ingeniero // The relatonship between language and context and its importance for the communication of the future engineer

    Directory of Open Access Journals (Sweden)

    Ada Caridad Cabrera - González

    2010-09-01

    Full Text Available El objetivo central que persigue el sistema educacional cubano es la formación de profesionalesintegrales. En esto, sin lugar a dudas, está implícito el propósito de lograr que sean además,competentes en el uso del lenguaje para que puedan satisfacer las exigencias, no solo del modelodel profesional diseñado para cada carrera de ciencias técnicas sino además, las del contexto dondese desenvuelven. El objetivo de este artículo, es demostrar el vínculo lenguaje-contexto y cómo através de este se puede favorecer la comunicación, a partir de considerar al lenguaje como mediadoresencial en los procesos de construcción de conocimientos en situaciones interactivas. Se utilizaronmétodos del nivel teórico y empírico que permitieron abordar el objeto de estudio y aproximarlo a lasposiciones actuales que tratan acerca de este particular. Como resultado de este trabajo se ofrecenalgunos ejemplos que evidencian que el uso que se hace del lenguaje está relacionado con elcontexto de comunicación y que en la medida en que el estudiante sepa operar con el lenguajecientífico-técnico podrá desarrollar determinadas habilidades que favorecerán su desempeñoprofesional presente y futuro.Palabras claves: comunicación, contexto, ingeniero, lenguaje._________________________________________________________________________AbstractThe main objective followed by the Cuban educational system is the formation of whole professionals.The purpose to achieve competent professionals in the use of the language to meet the demands notonly from the professional model designed for each career of technical science but also the ones fromthe context where they develop is implicit. The objective of this article is to show the language-contextbond and how it can favour communication, considering language as an essential mediator in theconstruction processes of knowledge in interactive situations. Methods from a theoretical andempirical level were used. They allowed

  8. The centralized monitoring system solution for auxiliary equipment and environmental facilities in the station operation%厂站运行辅助设备及环境设备的集中监测系统解决方案

    Institute of Scientific and Technical Information of China (English)

    张振华

    2013-01-01

    With the gradual expansion of power system construction, unattended substation is imperative. The number and type of auxiliary equipment and environmental equipment in station operation are relatively large, so to realize the efficient and centralized monitoring and management of the equipment bears the brunt of difficulties. A new solution of plant station running auxiliary equipment and environmental equipment for centralized monitoring system is designed and proposed based on the relative switch information of automatic control and new sensing technology collect equipment. The system realizes centralized monitoring and management on auxiliary equipment and environment in the station operation by the dispatching terminal, after the communication network of electric power and the internal information network sent back the running state data of auxiliary equipment and environmental equipment in the station operation, which not only greatly improves the quality and efficiency of the equipment operation and maintenance, but also provides a new solution for substation communication network operation and maintenance. It can effectively realize unmanned operation and development of substation.%随着电力系统建设规模日趋壮大,变电站无人化已势在必行。厂站运行辅助设备、环境设备的数量和类型均相对较多,实现设备的高效、集中监控管理便成为了首当其冲的难题。基于自动控制和新型传感技术采集设备的相关开关量信息,设计并提出了一种新型的厂站运行辅助设备及环境设备的集中监测系统解决方案。该方案通过电力通信网和内部信息网络完成厂站运行辅助设备及环境设备运行状态数据的回传,从而实现了地调主站端对厂站运行的辅助设备和环境的集中实时监控和管理,极大地提高了设备运行维护的质量和效率。该研究为今后变电站通信网络的运行和维护提供了一种新的解决

  9. Analysis of the problems of induced draft fans in a carbo-electric power station; Analisis de la problematica de ventiladores de tiro inducido de una central carboelectrica

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Sanchez, Valentin de Jesus; Vital Flores, Francisco [LAPEM, Comision Federal de Electricidad (Mexico)

    2007-11-15

    The induced draft fans of the 350 MW units of a Thermo-electric power plant presented problems consisting of the failure of the capacity of gases extraction, together with the presence of cracks in the blades; this condition was observed since the stage of putting into service. Consequently, losses have been originated in the availability in two units, as well as, losses due to the manufacture of new impellers, which also originated that, in some cases, that the measures of the impellers, locally manufactured, differed from the originals, resulting in differences in the unit's efficiency. [Spanish] Los ventiladores tiro inducido de las unidades de 350 MW de una Central Termoelectrica presentaban una problematica consistente en la falla de capacidad de extraccion de gases, aunado a la presencia de fracturas en las aspas de los impulsores, esta condicion se observo desde la etapa de puesta en servicio. En consecuencia se han ocasionado perdidas de disponibilidad en dos unidades, asi como tambien, perdidas debido a la fabricacion de nuevos impulsores, lo que tambien origino que, en algunos casos, las medidas de los impulsores, fabricados localmente, diferian de los originales, dando como resultado diferencias en la eficiencia de las unidades.

  10. Conventional and intelligent generalized supervisory control for combined cycle generating power stations.; Control supervisiorio generalizado convencional e inteligente para centrales de generacion de ciclo combinado

    Energy Technology Data Exchange (ETDEWEB)

    Martinez M, Miguel A; Sanchez P, Marino [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Gonzalez Rubio S, Jose L [Cento Nacional de Investigacion y Desarrollo Tecnologico (Cenidet), Cuernavaca, Morelos (Mexico)

    2005-07-01

    Under the expectations of expansion of electric power generation in Mexico, this work exposes the development of a conventional and intelligent generalized supervisory control (CSG) for a combined cycle generation power plant. This one allows to obtain the optimal operation of the power plant through the automatic starting of the generating units and to obtain the maximum possible amount of electrical power in automatic and safe form. For the development of the CSG a control loop by temperature was implemented for the gas turbine system and a control loop by strangled pressure for the gas turbine and a control loop by strangled pressure for the steam turbine. The design of these supervisory systems was made with base in the critical limits on the involved variables of the process: blading average temperature, for the gas turbine (GT) and strangled pressure for the steam turbine (ST) [Spanish] Bajo estas expectativas de expansion de generacion de energia en Mexico, este trabajo expone el desarrollo de un control supervisorio generalizado (CSG) para una central generacion de ciclo combinado. Este permite lograr la operacion optima de la planta a traves del arranque automatico de las unidades generadoras y obtener la maxima cantidad posible de potencia electrica en forma automatica y segura. Para el desarrollo del CSG se implanto un lazo de control por temperatura para el sistema de turbina de gas y un lazo de control por presion estrangulada para la turbina de gas y un lazo de control por presion estrangulada para la turbina de vapor. El diseno de estos sistemas supervisorio se realizo con base en los limites criticos de las variables del proceso involucradas: temperatura promedio de empaletado para la turbina de gas (TG) y presion estrangulada para la turbina de vapor (TV)

  11. Evaluación del desempeño de roles en el proceso de formación del Ingeniero Informático

    Directory of Open Access Journals (Sweden)

    Yucely López Trujillo

    2015-01-01

    Full Text Available En la actualidad el Plan de estudios que se aplica en la carrera de Ingeniería Informática en Cuba, es el denominado Plan D. Su creación y puesta en ejecución busca resolver deficiencias detectadas en los planes de estudios precedentes, en temas como: la creación de habilidades y hábitos de trabajo en equipo y el trabajo por roles del futuro ingeniero, entre otros aspectos. Así, desarrollar un proceso de formación de roles efectivo es un objetivo importante de la carrera. Para el logro de este empeño, resulta imprescindible evaluar sistemáticamente el desempeño de roles por parte de los estudiantes. En el presente trabajo se describe una propuesta para la evaluación del desempeño de roles en la carrera. Por otra parte, para apoyar la toma de decisiones estratégicas vinculadas al proceso de enseñanza, es necesario analizar en profundidad los resultados del proceso de formación de roles, con el propósito de: valorar la calidad de dicho proceso, identificar las fortalezas y debilidades, predecir comportamientos futuros, así como, descubrir relaciones ocultas entre los datos y nuevo conocimiento. Es por esto que se propone la aplicación de la minería de datos.

  12. La ingeniería legal en la formación del ingeniero y la contratación estatal en ingeniería

    Directory of Open Access Journals (Sweden)

    Fernando Guzmán Castro

    2011-02-01

    Full Text Available En la Facultad de Ingeniería de la Universidad Nacional de Colombia, sede Bogotá, se ha ofrecido desde hace mucho tiempo la asignatura Ingeniería Legal, que conceptualiza los puntos de convergencia entre el ejercicio de la ingeniería y los aspectos legales vigentes en el país. Inicialmente el ilustre ingeniero Alfredo Bateman, y más adelante los autores del artículo han dirigido el curso que se ha dictado para todas las especialidades de ingeniería. Al comienzo del presente artículo se describen los conceptos de la ingeniería legal, agrupándolos en subtemas: la legislación laboral, las actividades mercantiles y el régimen de sociedades, la propiedad y la legislación fiscal, la contratación en ingeniería, la legislación ambiental y la reglamentación de la profesión de ingeniería. En una segunda parte se profundiza en uno de los temas, la contratación en ingeniería, describiendo los tipos de contratos y las condiciones de contratación vigentes en la legislación colombiana.

  13. Educational software tool for protection system engineers: distance relay; Herramienta educativa para la formacion de ingenieros en protecciones electricas: relevador de distancia

    Energy Technology Data Exchange (ETDEWEB)

    Trujillo-Guajardo, L.A.; Conde-Enriquez, A. [Universidad Autonoma de Nuevo Leon, Nuevo Leon (Mexico)]. E-mail: luistrujillo84@gmail.com; con_de@yahoo.com

    2012-04-15

    In this article, a graphical software tool is presented; this tool is based on the education of protection system engineers. The theoretical fundaments used for the design of operation characteristics of distance relays and their algorithms are presented. The software allows the evaluation and analysis of real time events or simulated ones of every stage of design of the distance relay. Some example cases are presented to illustrate the activities that could be done with the graphical software tool developed. [Spanish] En este articulo se presenta una herramienta computacional grafica para apoyar la formacion de ingenieros en protecciones electricas. Los fundamentos teoricos para el diseno de caracteristicas de operacion de relevadores de distancia, asi como las rutinas de programacion de un relevador de distancia son presentados. La herramienta desarrollada permite la evaluacion de las etapas de diseno de relevadores y el analisis de la operacion ante eventos reales o simulados. Se presentan algunos casos de ejemplo para ilustrar las actividades didacticas que son posibles de realizar con la herramienta presentada.

  14. WVU Hydrogen Fuel Dispensing Station

    Energy Technology Data Exchange (ETDEWEB)

    Davis, William [West Virginia University Research Corporation, Morgantown, WV (United States)

    2015-09-01

    The scope of this project was changed during the course of the project. Phase I of the project was to construct a site similar to the site at Central West Virginia Regional Airport in Charleston, WV to show that duplication of the site was a feasible method of conducting hydrogen stations. Phase II of the project was necessitated due to a lack of funding that was planned for the development of the station in Morgantown. The US Department of Energy determined that the station in Charleston would be dismantled and moved to Morgantown and reassembled at the Morgantown site. This necessitated storage of the components of the station for almost a year at the NAFTC Headquarters which caused a number of issues with the equipment that will be discussed in later portions of this report. This report will consist of PHASE I and PHASE II with discussions on each of the tasks scheduled for each phase of the project.

  15. Cycle for fuel elements. Uranium production, programs for nuclear power stations and capital expenditure involved; Cycles de combustibles. Production d'uranium, programme de centrales electriques et effort financier correspondant

    Energy Technology Data Exchange (ETDEWEB)

    Andriot, J.; Gaussens, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    A number of different possible programs for nuclear power stations of various types are presented in this survey. These programs are established in relation to the use of uranium and thorium in amounts similar to those that shall probably be produced in France during the next fifteen years. As it is possible to draw plans for nuclear power stations in which several processes exist simultaneously, an unlimited number of variations being thinkable, this survey is limited to successive analysis of the results obtained by use of only one of each of the following three systems: - system natural uranium-graphite, - system natural uranium-heavy water, -system enriched uranium-pressurised light water. All schemes are considered as assemblages of these three simple systems. The effects of plutonium recycling are also considered for each system. The electric power installed and the capacity of stations situated up-stream and down-stream have been calculated by this method and an attempt has been made to establish the sum to be invested during the fifteen years necessary for the launching of the programs scheduled. A table of timing for the investments groups the results obtained. Considering the fact that French availabilities in capital shall not be unlimited during the coming years, this way of presenting the results seems to be interesting. (author)Fren. [French] L'etude presentee comporte l'examen d'un certain nombre d'hypotheses de programmes de centrales nucleaires de types differents. Ces programmes correspondent a l'utilisation de tonnages d'uranium et de thorium de l'ordre de grandeur de ceux qui seront probablement produits par la France dans les quinze prochaines annees. Comme il est possible de batir un programme de centrales nucleaires, comportant a la fois plusieurs filieres suivant des variantes en nombre infini, on s'est contente d'examiner successivement les resultats ous si on utilisait exclusivement l

  16. Robust velocity and load control of a steam turbine in a combined cycle thermoelectric power station; Control robusto de velocidad y carga de una turbina de vapor en una central termoelectrica de ciclo combinado

    Energy Technology Data Exchange (ETDEWEB)

    Reyes Archundia, Enrique

    1998-12-31

    of the computation, the programming languages and the numerical methods allow to develop mathematical models that simulate in an approximate manner the processes to control, as it is the case of the combined cycle thermoelectric power station and in this way making the evaluation of algorithms of modern control possible. In chapter I a functional description of the steam turbine process is given. Since this belongs to a combined cycle thermoelectric power station, it is begun with the description of this power station, later to emphasize the subsystem of the steam turbine and emphasize each one of the elements that comprise this last one. [Espanol] Este trabajo de investigacion esta orientado a disenar, desarrollar y validar un algoritmo de control moderno, que permita la obtencion de mejores desempenos en el control de velocidad de una turbina de vapor perteneciente a una central termoelectrica de ciclo combinado, en todo el intervalo de operacion, asi como la obtencion de mejores desempenos en el control de la cantidad de megawatts generados por la misma cuando esta acoplada a un generador electrico, comparando el desempeno con el obtenido mediante el controlador convencional existente. Los cambios en la referencia de velocidad o carga, son a solicitud del operador y se dan siempre en forma de rampa, indicando la rapidez con la que se desea efectuar el cambio de valor en la referencia. Esta es la razon por la cual el objetivo principal del control a disenar es realizar un buen seguimiento a referencias del tipo rampa. En el subsistema de la turbina de vapor existente el inconveniente de que las valvulas que regulan el flujo de vapor hacia la turbina, presentan un acoplamiento con la valvula del bypass que permite derivar el flujo de vapor hacia el condensador principal sin tener que pasar por la turbina. Es por esto que se propone un control multivariable que contemple la interaccion que se presenta entre las valvulas antes mencionadas, partiendo de un diseno

  17. Results in energy saving obtained with the application of speed variator in fossil power stations; Resultados de ahorro de energia obtenidos con la aplicacion de variadores de velocidad en centrales termoelectricas

    Energy Technology Data Exchange (ETDEWEB)

    Merlos Rueda, Rosa Maria [Programa de Ahorro de Energia del Sector Electrico (PAESE), Mexico, D. F. (Mexico)

    1999-07-01

    The project of installation of speed variator in fossil power stations (CT's) of Comision Federal de Electricidad (CFE), as an energy saving measure, is a pilot project that began with the support of the Subdivision de Generacion, and promoted by the Energy Saving Program of the Electric Sector (PAESE), with the putting in operation of an equipment in the condensate pump of the Punta Prieta II C. T. U3. The energy saving observed was substantial, fluctuating between the 19.4% at high loads (at 90% load) and the 71.1% at low loads (at 40% load) of the generating unit. With these results, it was decided to extend the scope of the project with the installation of 6 more equipment for equal number of fossil power stations, located in 4 of the 5 Regions of Generation. The fossil power stations, selected for this stage of the project were: C. T. Felipe Carrillo Puerto U1, C.T. Lerma U4, C.T. Salamanca U1, C.T. Monterrey U6, C.T. Francisco Villa U3 and the C.T. Punta Prieta II-U1. The equipment was in operation during the first quarter of 1998, and the first results indicate an energy savings average per equipment, between 39% and 52%. The recovery of the investment fluctuates between the 48.4% and the 87.6% in less than two years of operation, with which a maximum period of recovery of 3 years is expected. The estimated potential of energy saving, considering the application of these devices in condensate pumps, feedwater pumps (where no speed variator is installed) forced draft fans, induced draft fans and gas recirculation fans, as well as circulation water pumps, of the existing Generating Power stations, ascends to an annual total of 830,000, which represents an approximate 9.4% of the National consumption of self services. [Spanish] El proyecto de instalacion de variadores de velocidad en Centrales Termoelectricas (CT's) de la Comision Federal de Electricidad (CFE), como medida de ahorro de energia, es un proyecto piloto que se inicio con el apoyo de la

  18. Centralized Management of Military Health Strengths in Station Armed Forces%驻地部队卫勤力量集中调度管理模式改革

    Institute of Scientific and Technical Information of China (English)

    李曙光; 欧崇阳; 胡其平

    2011-01-01

    The author summarized the existing problems of station armed forces in health service person-nel , materials and equipment. Then, a new mode of health strength management was put forward, which included "integrating resources, centralized management and scientific development" , so as to reinforce the comprehensive effects of all level health institutions, serve the preparedness for emergency military region, complete diversified military operations, and satisfied the medical and health demands.%通过归纳目前驻地部队在卫勤人员、物资装备管理等方面存在的问题,对驻地部队“整合资源、集中调度、科学发展”的卫勤力量调度管理新模式进行探讨,以不断增强部队各级卫生机构建设的综合效益,为服务军事斗争准备、完成多样化军事任务、满足官兵医疗卫生需求提供强有力的支援.

  19. Design of Mobile Communication Base Station Centralized Monitoring Unit Based on EDGE%基于EDGE的通信基站环境监控单元的设计

    Institute of Scientific and Technical Information of China (English)

    董裕艺; 陆昕为; 黎春强; 钟文清

    2012-01-01

    对移动基站环境集中监控系统的历史及现状进行了简要介绍,分析了基于各种传输方式的基站环境监控系统的优缺点,利用增强型数据速率GSM演进技术(Enhanced Data Rate for GSM Evolution,EDGE)对基站动力环境各项参数进行采集及机房各路摄像头进行监控、存储,提出了基于EDGE的基站集中监控单元的设计思路,该设计具有费用低廉、可靠性高和及时性好的优点,有着很好的应用推广前景。%The history and current situation of environmental monitoring unit of mobile base station was introduced. A centralized monitoring unit based on EDGE with low cost, high reliability and real-time performance was presented. It uses enhanced data rate for GSM evolution technology, which can collect and process power and environment parameters in time. This design features low cost, high reliability and good in-time capability. Which presents a broad application prospect.

  20. COMPRENSIÓN DE LAS DISTRIBUCIONES MUESTRALES EN UN CURSO DE ESTADÍSTICA PARA INGENIEROS UNDERSTANDING OF SAMPLE DISTRIBUTIONS FOR A COURSE ON STATISTICS FOR ENGINEERS

    Directory of Open Access Journals (Sweden)

    Lidia Retamal P

    2007-04-01

    Full Text Available Se describe una propuesta didáctica de enseñanza contextualizada y con uso del programa @risk de las distribuciones muestrales en el aula de estadística para ingenieros de segundo año universitario. Apropiándonos de la teoría de las funciones semióticas, desarrollada en la Universidad de Granada-España, caracterizamos los elementos de significados de las propiedades importantes de las distribuciones muestrales y evaluamos, mediante campos de problemas algebraicos y de simulación, los errores o dificultades que los alumnos ponen de manifiesto en las aplicaciones de simulación de procesos en las ciencias de la ingeniería. Como consecuencia, al considerar los elementos de significados adquiridos en las respuestas de los estudiantes, proponemos la simulación para muestras pequeñas y grandes de forma intuitiva, como primer acercamiento del alumno hacia la construcción del significado de las distribuciones muestrales, usando el lenguaje gráfico con apoyo del computador, para posteriormente analizar con los estudiantes su forma algebraica según la naturaleza de las variables aleatorias Se describe una propuesta didáctica de enseñanza contextualizada y con uso del programa @risk de las distribuciones muestrales en el aula de estadística para ingenieros de segundo año universitario. Apropiándonos de la teoría de las funciones semióticas, desarrollada en la Universidad de Granada-España, caracterizamos los elementos de significados de las propiedades importantes de las distribuciones muestrales y evaluamos, mediante campos de problemas algebraicos y de simulación, los errores o dificultades que los alumnos ponen de manifiesto en las aplicaciones de simulación de procesos en las ciencias de la ingeniería. Como consecuencia, al considerar los elementos de significados adquiridos en las respuestas de los estudiantes, proponemos la simulación para muestras pequeñas y grandes de forma intuitiva, como primer acercamiento del alumno

  1. Information system for data management of civil buildings instrumentation in generating power stations; Sistema de informacion para el manejo de datos de la instrumentacion de las obras civiles de las centrales generadoras

    Energy Technology Data Exchange (ETDEWEB)

    Alvarado, Alonso; Escamilla, Juan Carlos; Alaniz, Felipe de Jesus [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Gonzalez, Francisco; Mena, Enrique [Comision Federal de Electricidad, Mexico, D. F. (Mexico)

    1997-12-31

    A relevant task performed by Comision Federal de Electricidad (CFE) is the analysis of the structural behavior and safety assessment of the country`s large electric energy generating stations. This task is performed capturing, revising an analyzing the information generated by measuring instruments installed in the power station civil structures. Such activity generates a large amount of data and the collection, analysis and assessment is a long and tiresome process; additionally, the generated information is kept in plain isolated files, that causes sluggishness in the process and delays in the access to the information. This article describes the characteristics of the Information System for Structure Measurements (Sistema de Informacion de Medicion de Estructuras) (SIME), developed by the Instituto de Investigaciones Electricas (IIE) for CFE in order to enhance the opportunity for the information management. SIME captures, arranges, stores and reports the data obtained from the measurements at the works with great efficiency and flexibility. This system is part of another of greater scope with which CFE will ensure an optimum operation condition of its civil buildings. [Espanol] Una tarea relevante que realiza la Comision Federal de Electricidad (CFE) es analizar el comportamiento estructural y evaluar la seguridad de las grandes obras generadoras de energia electrica del pais. Esta tarea la realiza capturando, revisando y analizando la informacion que generan instrumentos de medicion instalados en las estructuras civiles de las centrales. Tal actividad genera gran cantidad de datos y el proceso de recopilacion, analisis y evaluacion es tardado y tedioso; ademas, la informacion que se genera se guarda en archivos planos aislados, lo que ocasiona lentitud en el proceso y retraso en el acceso a la informacion. Este articulo describe las caracteristicas del Sistema de Informacion de Medicion de Estructuras (SIME) desarrollado por el Instituto de Investigaciones

  2. Caracterización ingeniero geológica del perfil de meteorización de rocas ultrabásicas serpentinizadas en el territorio de Moa, Cuba

    Directory of Open Access Journals (Sweden)

    Rafael Guardado-Lacaba

    2005-03-01

    Full Text Available Las cortezas de meteorización desarrollada sobre rocas ultrabásicas serpentinizadas en la región de Moa han sido ampliamente caracterizadas desde el punto de vista mineralógico y geoquímico, no siendo así respecto a su comportamiento ingeniero geológico, el cual constituye un elemento fundamental para emprender cualquier evaluación de riesgos asociados a movimientos de masas. La presente investigación abarcó las cortezas de tipo residual sobre las cuales se aplicaron los métodos geomecánicos tradicionalmente utilizados para caracterizar el comportamiento ingeniero geológico de un macizo. Se realizó la descripción visual de los diferentes horizontes lateríticos, y se aplicaron índices relacionados con las propiedades físico- mecánicas, estructurales y texturales tales como el índice de microfractura y micropetrográfico, índice de calidad del macizo rocoso (RQD e índice de alteración unificado. Como resultado se presenta una propuesta de clasificación ingeniero geológica del perfil en función del grado de meteorización, el cuál se definió en una escala de I a V a partir de los valores típicos de las propiedades físico mecánicas, RQD, relación porcentual roca/suelo y otros dos elementos relacionados con el modo de rotura de taludes y laderas y la tipología de deslizamiento

  3. Control rod cluster drop time anomaly Guandong nuclear power station (Daya bay) and Electricite de France nuclear power stations (1450 MWe N4 Series); Anomalie de temps de chute des grappes de controle centrale de guang dong (daya bay) et centrales d`electricite de France (Palier N4-1450 MWE)

    Energy Technology Data Exchange (ETDEWEB)

    Olivera, J.J.; Naury, S.; Tricot, N.; Tran Dai, P.; Gama, J.M.

    1996-12-31

    The anomaly of control rod cluster drop time revealed at Guandong Nuclear Power Station in Daya Bay and in the Chooz B1 pilot unit for the N4 series, led to the replacement of the M1 type control rod cluster guide tubes with 1300 MWe PWR type guide tubes, adapted to the geometry of the Guandong reactors and the 1450 MWe reactors of the N4 series. The comparison of the drop times obtained with the 1300 MWe type control rod cluster guide 1300 MWe type control rod cluster guide tubes gave satisfactory results. These met the safety criterion for N4 series control rod cluster drop times (2.15 under hot shutdown conditions). The drop time tests which will be carried out in middle of and at the end of cycle 1 of Chooz B1 should make it possible to finally validate the solution already successfully implemented at Guandong. However, this anomaly has revealed the limits of representativeness of the experimental test loops with regard to the real reactor configuration. In view of this, it has been deemed necessary to ask Electricite de France to pursue its analysis both on the understanding of the phenomena which led to this anomaly and on the limits of the representativeness of the experimental test loops. (authors).

  4. La formación de ingenieros de la edificación en empresas constructoras en la comunidad autónoma de Castilla-La Mancha. Su influencia en la satisfacción laboral

    OpenAIRE

    Fuentes-del-Burgo, Joaquín; Navarro-Astor, Elena

    2013-01-01

    Objeto: El objetivo de la investigación es indagar en las actividades formativas que desarrollan empresas constructoras en Castilla-La Mancha, con los ingenieros de edificación/arquitectos técnicos que trabajan como jefes de obra y su efecto sobre la satisfacción laboral. Diseño/metodología: Se realizaron 34 entrevistas semi-estructuradas. Mediante el empleo de metodología cualitativa, el contenido de las entrevistas se analizó utilizando el programa ATLAS.ti. Aportaciones y resultado...

  5. Marco de competencias genéricas para la formación de ingenieros en ciencias informáticas.Generic competencies framework for formation of engineers in informaticas science

    OpenAIRE

    Elizabeth Rodriguez Stiven; Yadenis Piñeiros Perez; Yordan Portela Pozo; Pedro Piñero Cruz

    2012-01-01

    En la industria del software, el trabajo en equipo es una práctica clave para el éxito de los proyectos, sin embargo, el enfoque de las competencias orientadas a mejorar la actuación de los profesionales desde la perspectiva del equipo ha sido insuficiente en los marcos de competencias. El presente trabajo tiene como objetivo completar el Marco de Competencias Genéricas para Ingenieros en Ciencias Informáticas desde una perspectiva social; competencias relac...

  6. Perfeccionamiento del programa de probabilidades y estadísticas vinculado a la formación de ingenieros informáticos en la universidad de las ciencias informáticas

    OpenAIRE

    Sarría, Julián; Izquierdo, Lázaro René; Permuy, José

    2010-01-01

    En este trabajo se pretende presentar las conclusiones a las que se arribó mediante el análisis realizado en las diferentes componentes del Programa analítico de Probabilidades y Estadísticas para el plan de formación del Ingeniero Informático de la Universidad de las Ciencias Informáticas de Cuba. Mediante un experimento pedagógico realizado en tres brigadas, donde ilustraremos los resultados alcanzados realizado sobre en la orientación de tareas docentes y en la formulación adecuada de los ...

  7. MANEJO DEL AGUA EN UN SISTEMA DE RIEGO INGENIERO SIN CASCADA Y SU EFECTO EN LA CONDUCTIVIDAD ELÉCTRICA DEL SUELO Y EL RENDIMIENTO EN EL CULTIVO DEL ARROZ (Oryza sativa L.

    Directory of Open Access Journals (Sweden)

    R. Polón

    2006-01-01

    Full Text Available En la granja Cubanacán perteneciente al CAI Arrocero Los Palacios, durante tres épocas poco lluviosas y tres lluviosas (desde 2000 hasta 2002, se desarrolló un estudio del manejo de agua en un sistema de riego ingeniero sin cascada, para conocer su efecto en la conductividad eléctrica del extracto de saturación del suelo y en el rendimiento del cultivo. Los resultados no mostraron diferencias significativas en el rendimiento agrícola y en la conductividad eléctrica del suelo cuando el riego se manejó en terrazas sin cascada (sin pendiente.

  8. China Tightens Control over Petrol Stations

    Institute of Scientific and Technical Information of China (English)

    Sun Huiping

    2002-01-01

    @@ China has recently mounted a nationwide campaign to standardize petrol stations. Based on the reports from China Central Television, all the petrol station that have not been licensed with "Oil Products Retail Permit" issued by the provincial economic and trade commission will be halted for business operation. Such petrol stations will be allowed to resume business if they are in line with the local industrial development plan and obtain the permits after going though all the necessary formalities. The petrol stations that are not in line with the development plan will be closed before August 31,2002.

  9. Departamento de ingenieros de la construcción. Escuela Técnica Superior de Aquisgrán

    Directory of Open Access Journals (Sweden)

    Rosskotten, Heinrich

    1964-12-01

    Full Text Available The main nucleus of this project consists of an eight storey building, housing 9 main lecture rooms, 2 smaller ones, and drawing classrooms. Attached to it, running in a westerly direction, another building has two large lecture halls, each with seating capacity for 200 students. Finally, the Institute blocks accommodate the following: statics, construction, roads, construction machinery, soil mechanics and town planning departments. All these are connected with the main building by means of three bridges. The various buildings are planned in a highly organic manner: this avoids architectural monotony, and tends, on the contrary, to convey an impression of dynamic harmony.El núcleo central del complejo está constituido por un edificio de ocho plantas, que alberga las dependencias correspondientes a nueve cátedras, dos aulas pequeñas y salas de dibujo. En conexión con el mismo —en dirección E—, otro de los edificios contiene dos grandes aulas con capacidad para 200 estudiantes cada una. Y finalmente los bloques de los Institutos, que albergan las siguientes naves: de Estática, de Construcción, de Carreteras, de Maquinaria de Construcción, así como la de Mecánica del Suelo y Urbanización, todas comunicadas con el edificio principal a través de tres puentes. La disposición orgánica de las distintas construcciones, no solamente evita la monotonía en la composición arquitectónica, sino que une todas las edificaciones en un conjunto armónico.

  10. La mecánica ilustrada en los ingenieros militares españoles. El proyecto de los almacenes de pólvora (1715-1798

    Directory of Open Access Journals (Sweden)

    Lluis i Ginovart, J.

    2015-09-01

    Full Text Available The catenary arches were part of the great structural success of the modernist architecture, and especially in the Gaudí’s work. The study of the Spanish military engineers’ projects shows that they were the first that introduced in the Spanish territory in the first third of the eighteenth century. Knowledge and the attempt to apply this type of structure, especially in the construction of Powder-Magazines, will demonstrate the knowledge of the scientific theory of these structures made by Hooke. The study of pre-scientific Mechanics was claimed by Juan de Herrera in the Academy of Mathematics (1583, as it is scientific Mechanics at the Academy of Barcelona (1720. For this reason and due to the use of catenary arch and vault, this will show that they provided the bases of modern mechanic.Los arcos catenarios formaron parte del gran éxito estructural de la arquitectura modernista y, especialmente, de la obra de Gaudí. El estudio de los proyectos de los ingenieros militares españoles, demuestra que fueron ellos los primeros que los introdujeron en el territorio español en el primer tercio del siglo XVIII. El conocimiento y el intento de aplicación de este tipo de estructuras, especialmente en la construcción de polvorines, demostraría el conocimiento de la teoría científica de estas estructuras formulada por Hooke. El estudio de la Mecánica pre-científica fue reclamado por Juan de Herrera en la Academia de Matemáticas (1583, al igual que lo será la Mecánica científica en la Academia de Barcelona (1720. Por ello y ante la utilización del arco y bóveda catenaria, se demostraría también que aportaron las bases de la Mecánica moderna.

  11. A new power station with clean combustion of coal residues financed by the Commission wins an international prize. Una nueva central electrica de combustion limpia de residuos de carbon financiada por la Comision gana un premio internacional

    Energy Technology Data Exchange (ETDEWEB)

    Furfari, S. (Commission of the European Communities, Brussels (Belgium). Directorate General for Energy, Energy Technology Unit)

    1993-07-01

    Between 1987 and 1989 10,55 million ecus were given by the European Commission's Demonstration Programme for the construction of the Emile Huchet power station using circulating fluidized bed combustion technology. The power station was constructed jointly by Charbonnages de France, COREAL, Stein Industrie and Lurgi. An important feature was its ability to burn coal preparation wastes cleanly. Despite burning poor quality fuel its emissions are well below the maximum standards. Other stations of this type are now planned in France.

  12. Estudio del estado de los Puentes en la Carretera Central en su travesía por la provincia de Matanzas.

    OpenAIRE

    Yordanis Cuba Cepero; Luis R. González Arestuche

    2012-01-01

    La Carretera Central es considerada una de las Siete Maravillas de la Ingeniería Civil en Cuba, según selección realizada en 1997 por la Unión Nacional de Arquitectos e Ingenieros de la Construcción de Cuba-UNAICC. Con el paso de los años, estudiosos de esa obra refuerzan su criterio de que fue el primer megaproyecto realizado en Cuba, por la complejidad de su ejecución y porque atravesó la isla por su centro. Considerando que uno de los territorios atravesados por esta importante vía, es la ...

  13. Square Kilometre Array station configuration using two-stage beamforming

    CERN Document Server

    Jiwani, Aziz; Razavi-Ghods, Nima; Hall, Peter J; Padhi, Shantanu; de Vaate, Jan Geralt bij

    2012-01-01

    The lowest frequency band (70 - 450 MHz) of the Square Kilometre Array will consist of sparse aperture arrays grouped into geographically-localised patches, or stations. Signals from thousands of antennas in each station will be beamformed to produce station beams which form the inputs for the central correlator. Two-stage beamforming within stations can reduce SKA-low signal processing load and costs, but has not been previously explored for the irregular station layouts now favoured in radio astronomy arrays. This paper illustrates the effects of two-stage beamforming on sidelobes and effective area, for two representative station layouts (regular and irregular gridded tile on an irregular station). The performance is compared with a single-stage, irregular station. The inner sidelobe levels do not change significantly between layouts, but the more distant sidelobes are affected by the tile layouts; regular tile creates diffuse, but regular, grating lobes. With very sparse arrays, the station effective area...

  14. Análisis del perfil de conocimientos de alumnos de nuevo ingreso en la Escuela Técnica Superior de Ingenieros Industriales de la Universidad Politécnica de Madrid

    Directory of Open Access Journals (Sweden)

    Ángel GARCÍA BELTRÁN

    2009-11-01

    Full Text Available RESUMEN: Se ha realizado un análisis estadístico de diversas calificaciones (último curso pre-universitario, examen de Selectividad y prueba de auto-evaluación de diferentes materias antes de comenzar el primer curso universitario obtenidas por alumnos de nuevo ingreso que van a realizar el primer curso de carrera en la Escuela Técnica Superior de Ingenieros Industriales de la Universidad Politécnica de Madrid. Se ha analizado la correlación entre estas calificaciones y otros posibles factores de influencia durante los cursos 1997-98, 1998-99 y 1999-2000. Los factores analizados son el tipo de centro de procedencia (público o privado y el sexo del alumno.ABSTRACT: A statistical analysus has been carried out for different grades (last high school year, college entrance examination and self-evaluation of different subjects before starting college obtained by students os the Escuela Técnica Superior de Ingenieros Industriales in the Universidad Politécnica de Madrid. Correlations between these grades and some potentially influential factors were analyzed for the academic years 1997-1998,1998-1999 and 1999-2000. The analyzed factors were the type of high school (public or private and the student's gender.RÉSUMÉ: On a fait une analyse statistique des certaines qualifications (dernier cours avant l'entrée a l'université, l'examen du Bac et une preuve de auto-evaluation de différents matières avant de commencer le premier cours universitaire obtenus pour des élèves de nouvelle incoporation quin vont commencer le premier cours à la Escuela Técnica Superior de Ingenieros Industriales de la Universidad Politécnica de Madrid. On a analysée la corrélation entre cettes qualifications et autres posibles facteurs d'influence pendant les courses 1997-1998, 1998-1999 et 1999-2000. Les facteurs analysés sont le carácter du établishement d'enseignement (public et privé et le sexe de l'élevé.

  15. La programación de software como competencia profesional del ingeniero en sistemas informáticos / Software programming as a professional competence of computing system engineers

    Directory of Open Access Journals (Sweden)

    San Andrés, Esthela María

    2016-01-01

    Full Text Available En el nuevo milenio con el impetuoso avance de las TIC las organizaciones y empresas demandan el desarrollo de sistemas computacionales para la automatización de diferentes procesos que permitan mejorar e incrementar su productividad y eficiencia, por lo que exigen de las instituciones de educación superior la preparación de profesionales que puedan aportar sus esfuerzos en la construcción de soluciones de negocio utilizando la tecnología computacional de vanguardia en la programación de software. El presente artículo describe los resultados parciales de una investigación que se realiza con el objetivo de formar y desarrollar la competencia profesional programar software en los Ingenieros en Sistemas Informáticos. Se realizó un diagnóstico en la carrera de Ingeniería en Sistemas Informáticos de la UTM donde se aplicaron encuestas, entrevistas y observaciones a clases, tomando una muestra de 179 estudiantes y siete profesores, los resultados identificaron insuficiencias de los estudiantes en la formación teórico-práctica en programación, lo que limita su futuro desempeño profesional. En el desarrollo de la investigación, también se utilizó el análisis y la síntesis para resumir los fundamentos teóricos esenciales que sirven de sustento a los resultados que se presentan, a través de la asignatura Programación I se muestra la relación entre la competencia y la asignatura y los resultados de aprendizaje que se deben alcanzar con las respectivas evidencias para su evaluación. Palabras clave: competencias, competencias profesionales, aprendizaje, ABSTRACT: In the new millennium with the impetuous progress of ICTs the organizations and companies demand the development of computer systems for automatizing processes which allow improving and increasing their productivity and efficiency, so they require from the higher education institutions the training of professionals capable of contributing to develop business solutions

  16. Reconstruction of Jinghua abandoned railway station

    OpenAIRE

    Yang, Guang; 楊光

    2015-01-01

    Old Jinghua railway station is one well-preserved part of Hangjiang Line. It needs to be preserved for the following reasons. Firstly is the history factor that it is the first railway station that designed and built by Chinese in south of china. What is more, Jinghua railway station make great contribution during the anti Japanese war. Secondly, the location of this site is very unique. It is located in the central of Jinghua city and near the connection point of Wu river, wuyi river and Yiw...

  17. Inter-comparison of radiation protection organization and practices in foreign nuclear power stations. Report nr 304; Intercomparaison de l'organisation et des pratiques de radioprotection dans des centrales nucleaires etrangeres. Rapport no. 304

    Energy Technology Data Exchange (ETDEWEB)

    Drouet, F.; Crouail, P.; D' Ascenzo, L.; Lefaure, C.; Vaillant, L.

    2007-02-15

    This report is notably based on visits performed in eight foreign nuclear power stations (in Spain, Belgium, Sweden, United Kingdom, United States, Switzerland) and a questionnaire on radiation protection, primary circuit chemistry, maintenance, planning, intervener training (subcontractors included), and factors explaining exposure evolutions. This report proposes a synthesis of these visits and surveys. It addresses the radiation protection management in the power station, actions undertaken with respect to dose rates, actions undertaken with respect to exposed work volumes, and contributions of remote data monitoring technologies

  18. Analysis of solar radiation and other variables for the evaluation of locations of thermo solar power stations; Analisis de radiacion solar y otras vairables para la evaluacion de emplazamientos de centrales termosolares

    Energy Technology Data Exchange (ETDEWEB)

    Montero, I.; Miranda, M. T.; Rojas, S.; Bolinaga, B.; Tierra, C.; Pico, J. del

    2008-07-01

    This paper presents the characteristics of various measuring weather stations located in future CCP thermal plants, showing the different systems they are equipped with, among others, pyrheliometer, pyrano meter, anemometers, thermo-hygrometer and data transmission system. Some results of solar radiation and other climate variables obtained in these stations are presented and analyzed in relation to existing data in the area, taking into account different external parameters that can influence the direct radiation obtained and, therefore, the future operation of the thermal plant. (Author)

  19. Risk of fire and dust explosions analysis in thermal Power station of ''As Pontes''; Analisis del Riesgo de fuego y Explosion en la Central Termica As Pontes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    Among the numerous difficulties come up in the industrial processes that operate with coal, the handling of combustible solids constitutes a priority objective because of the potential risk of fire and dust explosions that implies. The aim of this project was to determine the coal usage conditions that assure total safety in its manipulation avoiding every risks at the Thermal Power Station. Several variables had to be considered starting with the basis concept of coal, which ranges very different types, compositions and origins and studying the coal handling and operation condition on different areas in the Thermal Power Station. (Author)

  20. Leveled cost of the generation in a power station of combined cycle with integrated gas producer (CCGI); Costo nivelado de la generacion en una central de ciclo combinado con gasificador integrado (CCGI)

    Energy Technology Data Exchange (ETDEWEB)

    Hiriart Le Bert, Gerardo [Comision Federal de Electricidad (CFE), (Mexico); Beltran Mora, Hector [Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2004-06-15

    A brief description of a combined cycle power station that uses synthesis gas, better known as CCGI, is presented. The costs of the initial investment of several plants of this type, that have been described in literature, are analyzed and the predictions that different experts do on the costs that are expected in the near future are reviewed. Also the maintenance expenses that would be expected during the normal operation and the main maintenance are examined. The availability factors that reasonably must be considered based on the recent experiences are analyzed. Afterwards the sense which that the plant factor has in one of natural gas and one of synthesis, where generally are used as base plant. The costs of the different fuels that can be used in a CCGI are examined. Finally the leveled cost of the energy for both cases is calculated and the sensitivity of both to the cost of the respective fuels is examined. The result is presented in graphical form to show in a first attempt, the circumstances under which one or another technology could be preferable. It is made clear that the data used in this brief study are the best reasoned estimation and in no way they must be considered as definitive, in special in those of investment and maintenance of the CCGI where the operation history is still short. [Spanish] Se presenta una breve descripcion de una Central de Ciclo Combinado que utiliza Gas de Sintesis o mejor conocidas como CCGI. Se analizan los costos de la inversion inicial de varias plantas de este tipo que han sido descritas en la literatura y se resenan las predicciones que hacen diferentes expertos sobre los costos que se esperan para el futuro cercano. Tambien se examinan los gastos de mantenimiento que se esperarian durante la operacion normal y durante los mantenimientos mayores. Se analizan los factores de disponibilidad que razonablemente deben considerarse, basados en las experiencias recientes. Luego se discute el sentido que tiene el factor de

  1. Análisis de cambios de uso del suelo en la Delegación Municipal de Ingeniero White (Buenos Aires, Argentina: aplicación de geotecnologías

    Directory of Open Access Journals (Sweden)

    Andrea Marcela Silva Schweitzer

    2014-01-01

    Full Text Available La Delegación Municipal de Ingeniero White se encuentra en la provincia de Buenos Aires, Argentina. Este trabajo analiza la dinámica de cambio de uso del suelo en el área mencionada durante el periodo 1967-2012. La metodología empleada se basa, por un lado, en el desarrollo del proceso cartográfico necesario para la identificación de los usos del suelo a escala 1:50.000 para ambos años y, por otro, en la aplicación del método de tabulación cruzada en un entorno SIG con el fin de evaluar los cambios ocurridos en el lapso de 45 años. Los resultados muestran un importante crecimiento del uso residencial y poca variación en el resto de los usos.

  2. Diseño de una secuencia basada en optimización para la enseñanza del cálculo diferencial en formación de ingenieros

    OpenAIRE

    Martínez Díaz, Edna Fabiola

    2015-01-01

    En esta investigación se analiza el rol de la modelización en la formación de ingenieros y en particular cómo puede tener lugar en un curso de Cálculo Diferencial en el Tecnológico de Colima. Un análisis del plan de estudios y entrevistas a profesores responsables de la enseñanza de esta asignatura permiten dar cuenta de cómo se enseña la optimización, los libros de Cálculo considerados como apoyo y el tipo de problemas propuestos para su aplicación. Se consideran algunos elementos de la T...

  3. Análisis de las discrepancias económicas entre Swanston y Cia, constructora del Puerto de la Luz (Canarias, y su ingeniero Juan de León y Castillo

    Directory of Open Access Journals (Sweden)

    Mercedes Calvo Cruz

    2009-12-01

    Full Text Available En este trabajo pretendemos abordar la figura de Juan de León y Castillo, persona ilustre en su época, científico, ingeniero y apasionado por la política y la filosofía, desde una óptica novedosa, toda vez, que se pretende poner de manifiesto la estrecha relación que existió entre el ingeniero y la Swanston and Company, contratista que llevó a cabo la construcción del Puerto de Refugio de la Luz de Las Palmas. Esta relación data de 1891, momento en el que se firma el contrato entre ambos y Juan de León y Castillo se hace cargo de las obras del puerto como Ingeniero Director y Consultivo.Es nuestro objetivo evidenciar los entresijos económicos y los numerosos problemas que existieron entre el ingeniero y la empresa contratista y poner de manifiesto una desconocida faceta de Juan de León y Castillo como censor de los libros contables y demás documentación económica que la Swanston llevaba para la obra que nos ocupa.Por tanto, con este trabajo quisiéramos contribuir al conocimiento de un hombre ilustre y polifacético, que no sólo se dedicó a la estricta labor de desarrollar aquellos conocimientos recibidos sino que denota la curiosidad propia de un investigador y la ecuanimidad en su proceder.In this work we try to approach Juan de León y Castillo's figure, an illustrious person of his time, scientist, engineer and an enthusiast about politics and philosophy. From a new optic, he tried to reveal the narrow relation that existed between the engineer and the Swanston and Company, contractor who carried out the construction of El Puerto de Refugio de la Luz de Las Palmas. This relation dates back on the late 1891, moment in which the contract is signed between both and Juan de León y Castillo takes charge of the works of the port as an engineer, director and advisor.It is our aim to demonstrate the economic mesenteries and the numerous problems which existed between the engineer and the company contractor and to reveal an

  4. MANEJO DEL AGUA EN UN SISTEMA DE RIEGO INGENIERO CON CASCADA Y SU EFECTO EN LA CONDUCTIVIDAD ELÉCTRICA DEL SUELO Y EL RENDIMIENTO EN EL CULTIVO DEL ARROZ (Oryza sativa L.

    Directory of Open Access Journals (Sweden)

    R. Polón

    2006-01-01

    Full Text Available En la granja de semilla Cubanacán perteneciente al CAI Arrocero "Los Palacios", durante tres épocas poco lluviosas y tres lluviosas, desde 2000 hasta 2002, se desarrolló un estudio del manejo de agua en un sistema de riego ingeniero con cascada, para conocer su efecto en la conductividad eléctrica del extracto de saturación del suelo y el rendimiento del cultivo. Los resultados mostraron una disminución significativa en el rendimiento agrícola y un incremento en la conductividad eléctrica del suelo, cuando el riego se manejó en terrazas con cascada (pendiente, encontrándose diferencias significativas entre las dos primeras y la última terraza.

  5. El Área de Conocimiento de Expresión Gráfica en la Ingeniería en la Titulación de Ingeniero Técnico en Diseño Industrial

    OpenAIRE

    Sánchez Jiménez, Francisco Javier; Llorente Geniz, Julián; Fernández de la Puente Sarriá, Arturo; Martín Salinas, Jesús

    2003-01-01

    Durante el pasado curso académico 2001/02 ha comenzado a impartirse la titulación de Ingeniero Técnico en Diseño Industrial en la Escuela Universitaria Politécnica de la Universidad de Sevilla. Dentro del Plan de Estudios aprobado en esta Escuela, el Área de Conocimiento de Expresión Gráfica en la Ingeniería es responsable de una parte muy importante de la docencia. Se pretende, con esta comunicación, realizar un análisis del papel que la Expresión Gráfica en la Ingeniería desarrolla...

  6. Reference Climatological Stations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Reference Climatological Stations (RCS) network represents the first effort by NOAA to create and maintain a nationwide network of stations located only in...

  7. Hammond Bay Biological Station

    Data.gov (United States)

    Federal Laboratory Consortium — Hammond Bay Biological Station (HBBS), located near Millersburg, Michigan, is a field station of the USGS Great Lakes Science Center (GLSC). HBBS was established by...

  8. Streamflow Gaging Stations

    Data.gov (United States)

    Department of Homeland Security — This map layer shows selected streamflow gaging stations of the United States, Puerto Rico, and the U.S. Virgin Islands, in 2013. Gaging stations, or gages, measure...

  9. Fire Stations - 2007

    Data.gov (United States)

    Kansas Data Access and Support Center — Fire Station Locations in Kansas Any location where fire fighters are stationed at or based out of, or where equipment that such personnel use in carrying out their...

  10. Weather Radar Stations

    Data.gov (United States)

    Department of Homeland Security — These data represent Next-Generation Radar (NEXRAD) and Terminal Doppler Weather Radar (TDWR) weather radar stations within the US. The NEXRAD radar stations are...

  11. Water Level Station History

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Images contain station history information for 175 stations in the National Water Level Observation Network (NWLON). The NWLON is a network of long-term,...

  12. Fire Stations - 2009

    Data.gov (United States)

    Kansas Data Access and Support Center — Fire Stations in Kansas Any location where fire fighters are stationed or based out of, or where equipment that such personnel use in carrying out their jobs is...

  13. 室外集中直流远供系统在街道站的应用探讨%Discussion on the Application of Outdoor Centralized DC Remote System in the Street Station

    Institute of Scientific and Technical Information of China (English)

    陈文环

    2014-01-01

    There are many disadvantages in the traditional power supply solution for street stations,no matter in terms of outdoor small-48 V switching mode power supply or 220 V.These disadvantages will brought great pressure to mainte-nance in the later period.This paper proposed a new back-up solution of power protection for street stations:to use out-door 280 V high-voltage DC remote as the back-up power for street stations.%传统的街道站供电方案不论是室外小型-48 V开关电源还是220 V电源供电,都存在许多的弊端,给后期维护带来很大的压力。文中提出一种新的街道站后备电源保障方案,即采用室外280 V高压直流远供给街道站提供后备电源保障。

  14. Non-Coop Station History

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Station history documentation for stations outside the US Cooperative Observer network. Primarily National Weather Service stations assigned WBAN station IDs. Other...

  15. Space station, 1959 to . .

    Science.gov (United States)

    Butler, G. V.

    1981-04-01

    Early space station designs are considered, taking into account Herman Oberth's first space station, the London Daily Mail Study, the first major space station design developed during the moon mission, and the Manned Orbiting Laboratory Program of DOD. Attention is given to Skylab, new space station studies, the Shuttle and Spacelab, communication satellites, solar power satellites, a 30 meter diameter radiometer for geological measurements and agricultural assessments, the mining of the moons, and questions of international cooperation. It is thought to be very probable that there will be very large space stations at some time in the future. However, for the more immediate future a step-by-step development that will start with Spacelab stations of 3-4 men is envisaged.

  16. Analysis of internal events for the Unit 1 of the Laguna Verde nuclear power station; Analisis de eventos internos para la Unidad 1 de la Central Nucleolelectrica de Laguna Verde

    Energy Technology Data Exchange (ETDEWEB)

    Huerta B, A.; Aguilar T, O.; Nunez C, A.; Lopez M, R. [Comision Nacional de Seguridad Nuclear y Salvaguardias, 03000 Mexico D.F. (Mexico)

    1993-07-01

    This volume presents the results of the starter event analysis and the event tree analysis for the Unit 1 of the Laguna Verde nuclear power station. The starter event analysis includes the identification of all those internal events which cause a disturbance to the normal operation of the power station and require mitigation. Those called external events stay beyond the reach of this study. For the analysis of the Laguna Verde power station eight transient categories were identified, three categories of loss of coolant accidents (LOCA) inside the container, a LOCA out of the primary container, as well as the vessel break. The event trees analysis involves the development of the possible accident sequences for each category of starter events. Events trees by systems for the different types of LOCA and for all the transients were constructed. It was constructed the event tree for the total loss of alternating current, which represents an extension of the event tree for the loss of external power transient. Also the event tree by systems for the anticipated transients without scram was developed (ATWS). The events trees for the accident sequences includes the sequences evaluation with vulnerable nucleus, that is to say those sequences in which it is had an adequate cooling of nucleus but the remoting systems of residual heat had failed. In order to model adequately the previous, headings were added to the event tree for developing the sequences until the point where be solved the nucleus state. This process includes: the determination of the failure pressure of the primary container, the evaluation of the environment generated in the reactor building as result of the container failure or cracked of itself, the determination of the localization of the components in the reactor building and the construction of boolean expressions to estimate the failure of the subordinated components to an severe environment. (Author)

  17. Cooperative Station History Forms

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Various forms, photographs and correspondence documenting the history of Cooperative station instrumentation, location changes, inspections, and...

  18. Amtrak Rail Stations (National)

    Data.gov (United States)

    Department of Transportation — Updated database of the Federal Railroad Administration's (FRA) Amtrak Station database. This database is a geographic data set containing Amtrak intercity railroad...

  19. INTERACT Station Catalogue - 2015

    DEFF Research Database (Denmark)

    INTERACT stations are located in all major environmental envelopes of the Arctic providing an ideal platform for studying climate change and its impact on the environment and local communities. Since alpine environments face similar changes and challenges as the Arctic, the INTERACT network also...... and research groups. Therefore, INTERACT has produced a catalogue of research stations including descriptions of the physical setting, facilities and services offered at the stations. It is our hope that this catalogue will help researchers identify research stations that suit their specific needs. The 2015...

  20. The Station System

    Science.gov (United States)

    Brooks, David W.

    1970-01-01

    Describes an introductory college chemistry course utilizing laboratory stations and laboratory instruction by video taped presentations. Author discusses the general operation of the laboratory, the method used in evaluating students' progress, the teaching effectiveness and economy of the station system. Results of a student questionnaire reveal…

  1. SPS rectifier stations

    CERN Multimedia

    1974-01-01

    The first of the twelves SPS rectifier stations for the bending magnets arrived at CERN at the end of the year. The photograph shows a station with the rectifiers on the left and in the other three cubicles the chokes, capacitors and resistor of the passive filter.

  2. Nuclear power stations licensing

    International Nuclear Information System (INIS)

    The judicial aspects of nuclear stations licensing are presented. The licensing systems of the United States, Spain, France and Federal Republic of Germany are focused. The decree n0 60.824 from July 7 sup(th), 1967 and the following legislation which define the systematic and area of competence in nuclear stations licensing are analysed

  3. Secure base stations

    NARCIS (Netherlands)

    Bosch, Peter; Brusilovsky, Alec; McLellan, Rae; Mullender, Sape; Polakos, Paul

    2009-01-01

    With the introduction of the third generation (3G) Universal Mobile Telecommunications System (UMTS) base station router (BSR) and fourth generation (4G) base stations, such as the 3rd Generation Partnership Project (3GPP) Long Term Evolution (LTE) Evolved Node B (eNB), it has become important to se

  4. Refurbishment and optimisation of the district heating system and the Morettina central heating station in Locarno, Switzerland; Sanierung und Optimierung des Waermeverbundes und der Heizzentrale Morettina in Locarno. Erfolgskontrolle der Betriebsoptimierung

    Energy Technology Data Exchange (ETDEWEB)

    Lanz, S. [Dr. Eicher und Pauli AG, Berne (Switzerland); Ceschi, P. A. [Calore SA, c/o S.E.S., Locarno (Switzerland)

    2004-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) discusses the successful operational optimisation of a district heating system in Locarno in southern Switzerland. The system supplies various public and private buildings with heat and cold. This pilot installation features boilers fired with liquefied gas, a combined heat and power unit and a combined heat-pump/refrigeration system. The refurbishment of the installations after three years of operation is described, which included changes to the system's hydraulics and control system as well as improvements to various sub-stations in the heating network. The results of the refurbishment, including better co-ordination of the various aggregates and lower operating temperatures, are discussed. Recommendations are also made on the planning, organisation and operation of future projects of this type.

  5. Space station operations management

    Science.gov (United States)

    Cannon, Kathleen V.

    1989-01-01

    Space Station Freedom operations management concepts must be responsive to the unique challenges presented by the permanently manned international laboratory. Space Station Freedom will be assembled over a three year period where the operational environment will change as significant capability plateaus are reached. First Element Launch, Man-Tended Capability, and Permanent Manned Capability, represent milestones in operational capability that is increasing toward mature operations capability. Operations management concepts are being developed to accomodate the varying operational capabilities during assembly, as well as the mature operational environment. This paper describes operations management concepts designed to accomodate the uniqueness of Space Station Freedoom, utilizing tools and processes that seek to control operations costs.

  6. Enhanced Master Station History Report

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Enhanced Master Station History Report (EMSHR) is a compiled list of basic, historical information for every station in the station history database, beginning...

  7. Opportunities for the operation of the Comision Federal de Electricidad`s fossil fuel power plant stations eventually to be retired as cogeneration units; Oportunidades de operar las centrales termoelectricas de la Comision Federal de Electricidad, eventualmente retirables como unidades de cogeneracion

    Energy Technology Data Exchange (ETDEWEB)

    Buendia Dominguez, E. H. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Merlos Rueda, R. M. [Programa de Ahorro de Energia para el Sector Electrico, Mexico, D. F. (Mexico)

    1995-12-31

    The Programa de Ahorro de Energia para el Sector Electrico (PAESE) (Program for Energy Conservation for the Electric Sector) in collaboration with the Instituto de Investigaciones Electricas (IIE), decided to evaluate technically and economically the possibilities of operating the Comision Federal de Electricidad`s Thermoelectric Power Stations (TPS), eventually to be retired as cogeneration units in supplying thermal energy to industry. The study was focussed to the Monterrey and San Jeronimo Power Stations, determining in a first stage, the optimum radius for handling and transporting steam and/or hot water and so to define the industries that potentially could obtain heat energy from the TPS, in this stage the thermal needs of the evaluated industries were determined (pressure, temperature and flow). In a second stage, the different arrangements to be made to operate the selected TPS, so as to be in position of satisfying such thermal energy demands were evaluated. This paper presents the results of this study. [Espanol] El Programa de Ahorro de Energia para el Sector Electrico (PAESE), en colaboracion con el Instituto de Investigaciones Electricas, decidieron evaluar tecnica y economicamente las posibilidades de operar las centrales termoelectricas (CT`s) de la Comision Federal de Electricidad, eventualmente retirables, como unidades de cogeneracion al ofrecer calor a la industria. El estudio se enfoco en las centrales de Monterrey y San Jeronimo, determinado en una primera etapa el radio optimo para el manejo y transporte de vapor y/o agua caliente y asi definir a las industrias que potencialmente podrian recibir calor de las CT`s, en esta etapa se determinaron las necesidades termicas de las industrias evaluadas (presion, temperatura y flujo). En una segunda etapa se evaluo los diferentes arreglos para operar las CT`s seleccionadas para que pudieran satisfacer dichas demandas termicas. En este trabajo se presentaron los resultados de dicho estudio.

  8. Active Marine Station Metadata

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Active Marine Station Metadata is a daily metadata report for active marine bouy and C-MAN (Coastal Marine Automated Network) platforms from the National Data...

  9. Realtime USGS Streamflow Stations

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Approximately 5,000 of the 6,900 U.S. Geological Survey sampling stations are equipped with telemetry to transmit data on streamflow, temperature, and other...

  10. Master Station History Report

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Standard/Legacy MSHR, formally identified as the DSI-9767 dataset, is the legacy dataset/report sorted by NCDC Station ID and period of record. This...

  11. ASOS Station Photos

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The images contained in this library are of stations in the Automated Surface Observing System (ASOS) network. These images were taken between 1998-2001 for the...

  12. Mukilteo Research Station

    Data.gov (United States)

    Federal Laboratory Consortium — Research at the Mukilteo Research Station focuses on understanding the life cycle of marine species and the impacts of ecosystem stressors on anadromous and marine...

  13. Materials Test Station

    Data.gov (United States)

    Federal Laboratory Consortium — When completed, the Materials Test Station at the Los Alamos Neutron Science Center will meet mission need. MTS will provide the only fast-reactor-like irradiation...

  14. FEMA DFIRM Station Start

    Data.gov (United States)

    Minnesota Department of Natural Resources — This table contains information about station starting locations. These locations indicate the reference point that was used as the origin for distance measurements...

  15. USRCRN Station Information

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Documentation of United States Regional Climate Reference Network (USRCRN) installations in 2009. Installations documented are for USRCRN pilot project stations in...

  16. Electrostatic pickup station

    CERN Multimedia

    1982-01-01

    Electrostatic pickup station, with 4 interleaved electrodes, to measure beam position in the horizontal and vertical plane. This type is used in the transfer lines leaving the PS (TT2, TT70, TTL2). See also 7904075.

  17. Space Station galley design

    Science.gov (United States)

    Trabanino, Rudy; Murphy, George L.; Yakut, M. M.

    1986-01-01

    An Advanced Food Hardware System galley for the initial operating capability (IOC) Space Station is discussed. Space Station will employ food hardware items that have never been flown in space, such as a dishwasher, microwave oven, blender/mixer, bulk food and beverage dispensers, automated food inventory management, a trash compactor, and an advanced technology refrigerator/freezer. These new technologies and designs are described and the trades, design, development, and testing associated with each are summarized.

  18. Mesocarnivore Photo Stations [ds26

    Data.gov (United States)

    California Department of Resources — This database was established to record furbearer and raptor presence through photographs taken at camera stations. The general study area where camera stations...

  19. Soil Erosion and Agricultural Afforestation at the South of Central Siberia (To 55 Years of Foundation of Khakass Erosion Preventive Station of V. N. Sukachev Institute of Forest, Russian Academy of Sciences, Siberian Branch

    Directory of Open Access Journals (Sweden)

    A. I. Lobanov

    2015-02-01

    Full Text Available Results of fundamental and applied studies of V. N. Sukachev Institute of Forest Russian Academy of Sciences, Siberian Branch and the Research Institute for Agrarian Problems of Khakassia, Federal Agency of Scientific Organizations of Russia in soil deflation control using management, also agrotechnological and agroafforestation measures, have been given in this scientific review. These activities were undertaken for 55 years. It was established that an average annual humus loss on arable lands in the south of Central Siberia made 1.6 t per 1 ha in the result of soil erosion. The system of usage and protection of soils subjected to erosion has been considered which covers the net of forest shelter belts, strip planting of agricultural crops, application of soil protective farming equipment and fertilizing. In the result of complex studies of soils prone to erosion the following activities were worked out: the way for fertility increase of sandy-loam soils by deep application of organic fertilizers; the way for growing the Siberian larch shelter forests; the way for growing the shelter stands using diagonally- wide meshed construction; the way for growing stands on slope pastures; the technology for growing the two-row shelter forests with a wide row- spacing; ways for growing stands for cattle-breeding purpose; ways for growing massive Scots pine stands; principles of choice of trees and bushes for shelter forests; the main standards for evaluation of linear steppe stands in the south of Krasnoyarsk Krai, Khakass Republic and the Republic of Tyva; concept for growing a new generation of shelter forests ect. Protective forest stands established in the south of Central Siberia in the area more than 50 thousand ha are shown to give a new environmental effect resulting in an increase of soil fertility and crop capacity. Studies of tactical and perspective levels have been shown in the paper, realization of which will promote solving the problems of

  20. The local economic and social effects of power station siting: anticipated, demonstrated and perceived

    International Nuclear Information System (INIS)

    The paper discusses the economic and social effects of power station siting at a local level using material based on the interim research findings from a project commissioned by the Central Electricity Generating Board. The cases for and against power station development are outlined and a review of the actual economic and social effects is presented, drawn from a study of a conventional power station at Drax and a nuclear power station at Sizewell. (U.K.)

  1. UMTS Network Stations

    Science.gov (United States)

    Hernandez, C.

    2010-09-01

    The weakness of small island electrical grids implies a handicap for the electrical generation with renewable energy sources. With the intention of maximizing the installation of photovoltaic generators in the Canary Islands, arises the need to develop a solar forecasting system that allows knowing in advance the amount of PV generated electricity that will be going into the grid, from the installed PV power plants installed in the island. The forecasting tools need to get feedback from real weather data in "real time" from remote weather stations. Nevertheless, the transference of this data to the calculation computer servers is very complicated with the old point to point telecommunication systems that, neither allow the transfer of data from several remote weather stations simultaneously nor high frequency of sampling of weather parameters due to slowness of the connection. This one project has developed a telecommunications infrastructure that allows sensorizadas remote stations, to send data of its sensors, once every minute and simultaneously, to the calculation server running the solar forecasting numerical models. For it, the Canary Islands Institute of Technology has added a sophisticated communications network to its 30 weather stations measuring irradiation at strategic sites, areas with high penetration of photovoltaic generation or that have potential to host in the future photovoltaic power plants connected to the grid. In each one of the stations, irradiance and temperature measurement instruments have been installed, over inclined silicon cell, global radiation on horizontal surface and room temperature. Mobile telephone devices have been installed and programmed in each one of the weather stations, which allow the transfer of their data taking advantage of the UMTS service offered by the local telephone operator. Every minute the computer server running the numerical weather forecasting models receives data inputs from 120 instruments distributed

  2. The Space Station

    Science.gov (United States)

    Sharples, R.; Hieatt, J.

    1984-11-01

    The configuration of the Space Station under design studies by NASA is limited only by the capabilities of the Shuttle and the purposes to which it is applied. Once the standard interlocks, launch vibration modes, and pallet designs are fixed, all other assembly of modular components, testing, and trim will be performed in space. The Station will serve for long-term experiments, as a base for planetary missions asembly, launch, and retrieval, and for loading and launching multiple satellites on an orbital transfer vehicle. Materials processing research will be carried out in the Station, as will various scientific and commercial remote sensing activities. The first operational version (1990) will require four Shuttle launches to reach an assembled mass of 70,000 kg drawing 30 kWe from solar panels and housing a crew of five. By the year 2000 the station will support 10-12 crew members in five habitat modules, will be 31 m long, will have cost $18-20 billion, and will be returning $2 billion per year. The station will be periodically reboosted to higher orbits that decay suficiently for orbiter rendezvous for supplies and assignments.

  3. Waste Transfer Stations

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund

    2011-01-01

    tion and transport is usually the most costly part of any waste management system; and when waste is transported over a considerable distance or for a long time, transferring the waste from the collection vehicles to more efficient transportation may be economically beneficial. This involves...... a transfer station where the transfer takes place. These stations may also be accessible by private people, offering flexibility to the waste system, including facilities for bulky waste, household hazardous waste and recyclables. Waste transfer may also take place on the collection route from small...... satellite collection vehicles to large compacting vehicles that cannot effectively travel small streets and alleys within the inner city or in residential communities with narrow roads. However, mobile transfer is not dealt with in this chapter, which focuses on stationary transfer stations. This chapter...

  4. Hydrogen Fuelling Stations

    DEFF Research Database (Denmark)

    Rothuizen, Erasmus Damgaard

    This thesis concerns hydrogen fuelling stations from an overall system perspective. The study investigates thermodynamics and energy consumption of hydrogen fuelling stations for fuelling vehicles for personal transportation. For the study a library concerning the components in a hydrogen fuelling...... station has been developed in Dymola. The models include the fuelling protocol (J2601) for hydrogen vehicles made by Society of Automotive Engineers (SAE) and the thermodynamic property library CoolProp is used for retrieving state point. The components in the hydrogen fuelling library are building up....... A system consisting of one high pressure storage tank is used to investigate the thermodynamics of fuelling a hydrogen vehicle. The results show that the decisive parameter for how the fuelling proceeds is the pressure loss in the vehicle. The single tank fuelling system is compared to a cascade fuelling...

  5. Hydrogen vehicle fueling station

    Energy Technology Data Exchange (ETDEWEB)

    Daney, D.E.; Edeskuty, F.J.; Daugherty, M.A. [Los Alamos National Lab., NM (United States)] [and others

    1995-09-01

    Hydrogen fueling stations are an essential element in the practical application of hydrogen as a vehicle fuel, and a number of issues such as safety, efficiency, design, and operating procedures can only be accurately addressed by a practical demonstration. Regardless of whether the vehicle is powered by an internal combustion engine or fuel cell, or whether the vehicle has a liquid or gaseous fuel tank, the fueling station is a critical technology which is the link between the local storage facility and the vehicle. Because most merchant hydrogen delivered in the US today (and in the near future) is in liquid form due to the overall economics of production and delivery, we believe a practical refueling station should be designed to receive liquid. Systems studies confirm this assumption for stations fueling up to about 300 vehicles. Our fueling station, aimed at refueling fleet vehicles, will receive hydrogen as a liquid and dispense it as either liquid, high pressure gas, or low pressure gas. Thus, it can refuel any of the three types of tanks proposed for hydrogen-powered vehicles -- liquid, gaseous, or hydride. The paper discusses the fueling station design. Results of a numerical model of liquid hydrogen vehicle tank filling, with emphasis on no vent filling, are presented to illustrate the usefulness of the model as a design tool. Results of our vehicle performance model illustrate our thesis that it is too early to judge what the preferred method of on-board vehicle fuel storage will be in practice -- thus our decision to accommodate all three methods.

  6. Centralized surveillance and control of satellite networks

    Science.gov (United States)

    Rzewnicki, S. E.; McBeath, J. W.; Brostrup-Jensen, P.

    Satellite based services and networks are increasing in number. This paper describes how such networks can be operated efficiently using software based systems to do satellite transmission surveillance and remote earth station status, alarm and control monitoring at a centralized operations control center. Arrangements are available to accomplish real time, customer controlled configuration of space segments and earth station equipment. Application of the system elements satellite transmission surveillance, alarm and control central, earth station remote, and customer control terminals - to a number of typical networks is described.

  7. La formación de ingenieros de la edificación en empresas constructoras en la comunidad autónoma de Castilla-La Mancha. Su influencia en la satisfacción laboral

    Directory of Open Access Journals (Sweden)

    Elena Navarro-Astor

    2013-09-01

    Full Text Available Objeto: El objetivo de la investigación es indagar en las actividades formativas que desarrollan empresas constructoras en Castilla-La Mancha, con los ingenieros de edificación/arquitectos técnicos que trabajan como jefes de obra y su efecto sobre la satisfacción laboral. Diseño/metodología: Se realizaron 34 entrevistas semi-estructuradas. Mediante el empleo de metodología cualitativa, el contenido de las entrevistas se analizó utilizando el programa ATLAS.ti. Aportaciones y resultados: Salvo una gran empresa, no existe una planificación de la formación que responda completamente a las necesidades de estos profesionales. Existe una formación introductoria en los sistemas de gestión de la empresa (cuando los hay, y la obligatoria por ley en prevención de riesgos laborales. Adicionalmente, la mayoría de los ingenieros realizan actividades de formación propias, con el fin de actualizar o aumentar conocimientos, o para mejorar en el puesto de trabajo. Han aparecido una serie de barreras que dificultan la existencia y los efectos que podría tener la formación sobre las personas que la realizan. Finalmente, el efecto de la formación sobre la satisfacción laboral suele ser positivo, con mayor intensidad en aquellos casos en los que la formación ayuda a mejorar el desempeño en el puesto de trabajo. Implicaciones prácticas: Los resultados podrían ayudar a las empresas constructoras a definir un programa de formación que cumpla adecuadamente los objetivos de esta práctica esencial en el desarrollo de los recursos humanos. Valor añadido: Se cubre un vacío existente en la literatura sobre la dirección y gestión de recursos humanos en el Sector de la Construcción en España. El estudio aporta la visión que los ingenieros de edificación/arquitectos técnicos tienen sobre la formación y sus efectos.Purpose: This paper explores training activities for building engineers, working as site managers, carried out by construction

  8. Prácticas de desarrollo profesional de empresas constructoras con arquitectos técnicos e ingenieros de edificación que trabajan como jefes de obra. Análisis del efecto sobre su satisfacción laboral

    OpenAIRE

    FUENTES DEL BURGO, JOAQUÍN; Navarro Astor, Elena

    2015-01-01

    La investigación ha indagado sobre las políticas y prácticas de desarrollo profesional que las empresas constructoras desarrollan con arquitectos técnicos e ingenieros de edificación que trabajan como jefes de obra. Concretamente se estudiaron las acciones de formación desarrolladas por las empresas, la promoción y los planes de carrera. Además se ha analizado el efecto de estas prácticas sobre la satisfacción laboral de estos técnicos. Se ha utilizado una metodología cualitativa realizando e...

  9. Investigación cualitativa de las políticas y prácticas de desarrollo profesional de empresas constructoras con arquitectos técnicos e ingenieros de edificación que trabajan como jefes de obra. Análisis del efecto sobre su satisfacción laboral

    OpenAIRE

    FUENTES DEL BURGO, JOAQUÍN; Navarro Astor, Elena

    2015-01-01

    La investigación ha indagado sobre las políticas y prácticas de desarrollo profesional que las empresas constructoras desarrollan con arquitectos técnicos e ingenieros de edificación que trabajan como jefes de obra. Concretamente se estudiaron las acciones de formación desarrolladas por las empresas, la promoción y los planes de carrera. Además se ha analizado el efecto de estas prácticas sobre la satisfacción laboral de estos técnicos. Se ha utilizado una metodología cualitativa realizand...

  10. Space Station Final Configuration

    Science.gov (United States)

    1994-01-01

    An artist's conception of what the final configuration of the International Space Station (ISS) will look like when it is fully built and deployed. The ISS is a multidisciplinary laboratory, technology test bed, and observatory that will provide an unprecedented undertaking in scientific, technological, and international experimentation.

  11. Galileo Station Keeping Strategy

    Science.gov (United States)

    Perez-Cambriles, Antonio; Bejar-Romero, Juan Antonio; Aguilar-Taboada, Daniel; Perez-Lopez, Fernando; Navarro, Daniel

    2007-01-01

    This paper presents analyses done for the design and implementation of the Maneuver Planning software of the Galileo Flight Dynamics Facility. The station keeping requirements of the constellation have been analyzed in order to identify the key parameters to be taken into account in the design and implementation of the software.

  12. Designing a Weather Station

    Science.gov (United States)

    Roman, Harry T.

    2012-01-01

    The collection and analysis of weather data is crucial to the location of alternate energy systems like solar and wind. This article presents a design challenge that gives students a chance to design a weather station to collect data in advance of a large wind turbine installation. Data analysis is a crucial part of any science or engineering…

  13. Electrostatic pickup station

    CERN Multimedia

    1979-01-01

    Electrostatic pickup station, with 4 electrodes, to measure beam position in the horizontal and vertical plane. This type is used in the transfer lines leaving the PS (TT2, TTL2, TT70). See also 8206063, where the electrode shapes are clearly visible.

  14. Kiowa Creek Switching Station

    Energy Technology Data Exchange (ETDEWEB)

    1990-03-01

    The Western Area Power Administration (Western) proposes to construct, operate, and maintain a new Kiowa Creek Switching Station near Orchard in Morgan County, Colorado. Kiowa Creek Switching Station would consist of a fenced area of approximately 300 by 300 feet and contain various electrical equipment typical for a switching station. As part of this new construction, approximately one mile of an existing 115-kilovolt (kV) transmission line will be removed and replaced with a double circuit overhead line. The project will also include a short (one-third mile) realignment of an existing line to permit connection with the new switching station. In accordance with the Council on Environmental Quality (CEQ) regulations for implementing the procedural provisions of the National Environmental Policy Act of 1969 (NEPA), 40 CFR Parts 1500--1508, the Department of Energy (DOE) has determined that an environmental impact statement (EIS) is not required for the proposed project. This determination is based on the information contained in this environmental assessment (EA) prepared by Western. The EA identifies and evaluates the environmental and socioeconomic effects of the proposed action, and concludes that the advance impacts on the human environment resulting from the proposed project would not be significant. 8 refs., 3 figs., 1 tab.

  15. Network centrality of metro systems.

    Directory of Open Access Journals (Sweden)

    Sybil Derrible

    Full Text Available Whilst being hailed as the remedy to the world's ills, cities will need to adapt in the 21(st century. In particular, the role of public transport is likely to increase significantly, and new methods and technics to better plan transit systems are in dire need. This paper examines one fundamental aspect of transit: network centrality. By applying the notion of betweenness centrality to 28 worldwide metro systems, the main goal of this paper is to study the emergence of global trends in the evolution of centrality with network size and examine several individual systems in more detail. Betweenness was notably found to consistently become more evenly distributed with size (i.e. no "winner takes all" unlike other complex network properties. Two distinct regimes were also observed that are representative of their structure. Moreover, the share of betweenness was found to decrease in a power law with size (with exponent 1 for the average node, but the share of most central nodes decreases much slower than least central nodes (0.87 vs. 2.48. Finally the betweenness of individual stations in several systems were examined, which can be useful to locate stations where passengers can be redistributed to relieve pressure from overcrowded stations. Overall, this study offers significant insights that can help planners in their task to design the systems of tomorrow, and similar undertakings can easily be imagined to other urban infrastructure systems (e.g., electricity grid, water/wastewater system, etc. to develop more sustainable cities.

  16. Network centrality of metro systems.

    Science.gov (United States)

    Derrible, Sybil

    2012-01-01

    Whilst being hailed as the remedy to the world's ills, cities will need to adapt in the 21(st) century. In particular, the role of public transport is likely to increase significantly, and new methods and technics to better plan transit systems are in dire need. This paper examines one fundamental aspect of transit: network centrality. By applying the notion of betweenness centrality to 28 worldwide metro systems, the main goal of this paper is to study the emergence of global trends in the evolution of centrality with network size and examine several individual systems in more detail. Betweenness was notably found to consistently become more evenly distributed with size (i.e. no "winner takes all") unlike other complex network properties. Two distinct regimes were also observed that are representative of their structure. Moreover, the share of betweenness was found to decrease in a power law with size (with exponent 1 for the average node), but the share of most central nodes decreases much slower than least central nodes (0.87 vs. 2.48). Finally the betweenness of individual stations in several systems were examined, which can be useful to locate stations where passengers can be redistributed to relieve pressure from overcrowded stations. Overall, this study offers significant insights that can help planners in their task to design the systems of tomorrow, and similar undertakings can easily be imagined to other urban infrastructure systems (e.g., electricity grid, water/wastewater system, etc.) to develop more sustainable cities. PMID:22792373

  17. Hydrogen Filling Station

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, Robert F; Sabacky, Bruce; Anderson II, Everett B; Haberman, David; Al-Hassin, Mowafak; He, Xiaoming; Morriseau, Brian

    2010-02-24

    Hydrogen is an environmentally attractive transportation fuel that has the potential to displace fossil fuels. The Freedom CAR and Freedom FUEL initiatives emphasize the importance of hydrogen as a future transportation fuel. Presently, Las Vegas has one hydrogen fueling station powered by natural gas. However, the use of traditional sources of energy to produce hydrogen does not maximize the benefit. The hydrogen fueling station developed under this grant used electrolysis units and solar energy to produce hydrogen fuel. Water and electricity are furnished to the unit and the output is hydrogen and oxygen. Three vehicles were converted to utilize the hydrogen produced at the station. The vehicles were all equipped with different types of technologies. The vehicles were used in the day-to-day operation of the Las Vegas Valley Water District and monitoring was performed on efficiency, reliability and maintenance requirements. The research and demonstration utilized for the reconfiguration of these vehicles could lead to new technologies in vehicle development that could make hydrogen-fueled vehicles more cost effective, economical, efficient and more widely used. In order to advance the development of a hydrogen future in Southern Nevada, project partners recognized a need to bring various entities involved in hydrogen development and deployment together as a means of sharing knowledge and eliminating duplication of efforts. A road-mapping session was held in Las Vegas in June 2006. The Nevada State Energy Office, representatives from DOE, DOE contractors and LANL, NETL, NREL were present. Leadership from the National hydrogen Association Board of Directors also attended. As a result of this session, a roadmap for hydrogen development was created. This roadmap has the ability to become a tool for use by other road-mapping efforts in the hydrogen community. It could also become a standard template for other states or even countries to approach planning for a hydrogen

  18. Hydrogen Filling Station

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, Robert F; Sabacky, Bruce; Anderson II, Everett B; Haberman, David; Al-Hassin, Mowafak; He, Xiaoming; Morriseau, Brian

    2010-02-24

    Hydrogen is an environmentally attractive transportation fuel that has the potential to displace fossil fuels. The Freedom CAR and Freedom FUEL initiatives emphasize the importance of hydrogen as a future transportation fuel. Presently, Las Vegas has one hydrogen fueling station powered by natural gas. However, the use of traditional sources of energy to produce hydrogen does not maximize the benefit. The hydrogen fueling station developed under this grant used electrolysis units and solar energy to produce hydrogen fuel. Water and electricity are furnished to the unit and the output is hydrogen and oxygen. Three vehicles were converted to utilize the hydrogen produced at the station. The vehicles were all equipped with different types of technologies. The vehicles were used in the day-to-day operation of the Las Vegas Valley Water District and monitoring was performed on efficiency, reliability and maintenance requirements. The research and demonstration utilized for the reconfiguration of these vehicles could lead to new technologies in vehicle development that could make hydrogen-fueled vehicles more cost effective, economical, efficient and more widely used. In order to advance the development of a hydrogen future in Southern Nevada, project partners recognized a need to bring various entities involved in hydrogen development and deployment together as a means of sharing knowledge and eliminating duplication of efforts. A road-mapping session was held in Las Vegas in June 2006. The Nevada State Energy Office, representatives from DOE, DOE contractors and LANL, NETL, NREL were present. Leadership from the National hydrogen Association Board of Directors also attended. As a result of this session, a roadmap for hydrogen development was created. This roadmap has the ability to become a tool for use by other road-mapping efforts in the hydrogen community. It could also become a standard template for other states or even countries to approach planning for a hydrogen

  19. Battery charging stations

    Energy Technology Data Exchange (ETDEWEB)

    Bergey, M.

    1997-12-01

    This paper discusses the concept of battery charging stations (BCSs), designed to service rural owners of battery power sources. Many such power sources now are transported to urban areas for recharging. A BCS provides the opportunity to locate these facilities closer to the user, is often powered by renewable sources, or hybrid systems, takes advantage of economies of scale, and has the potential to provide lower cost of service, better service, and better cost recovery than other rural electrification programs. Typical systems discussed can service 200 to 1200 people, and consist of stations powered by photovoltaics, wind/PV, wind/diesel, or diesel only. Examples of installed systems are presented, followed by cost figures, economic analysis, and typical system design and performance numbers.

  20. Weigh-in-Motion Stations

    Data.gov (United States)

    Department of Homeland Security — The data included in the GIS Traffic Stations Version database have been assimilated from station description files provided by FHWA for Weigh-in-Motion (WIM), and...

  1. Automatic Traffic Recorder (ATR) Stations

    Data.gov (United States)

    Department of Homeland Security — The data included in the GIS Traffic Stations Version database have been assimilated from station description files provided by FHWA for Weigh-in-Motion (WIM), and...

  2. Emergency Medical Service (EMS) Stations

    Data.gov (United States)

    Kansas Data Access and Support Center — EMS Locations in Kansas The EMS stations dataset consists of any location where emergency medical services (EMS) personnel are stationed or based out of, or where...

  3. Railway Station Facilities in Rural and Urban Services Based on Observation and User Feedback

    Directory of Open Access Journals (Sweden)

    Mohd Masirin Mohd Idrus

    2016-01-01

    Full Text Available Public transport is one of the facilities available in Malaysia. Overwhelming demand from the community has demanded public transport as an alternative for some people to do their daily activities. The increasing of Malaysian population brought many problems to the environment especially traffic congestion problem. The Government spends a lot of money to overcome this problem [10]. Public transport has been upgraded to ensure user comfort. Most people in the city are more interested in using railway transport as traffic congestion and travel time accuracy is better than other public transport [1, 5]. To influence public demand, the facilities available at the train station should be complete [3, 5]. The choice of location for the study are Batu Gajah station (station 1 and Kluang station (station 2 for rural services while Bandar Tasik Selatan station (station 3 and KL Central station (station 4 for urban services. The results of this study showed that, based on data and information obtained from field survey work and the feedback questionnaires from users, basic facilities at railway stations surveyed for urban and rural services can be identified and listed. An analysis of the status of the facilities at railway stations can be established through the safety of passengers and observations in the field. The facilities available at the urban service station are more complete than in rural service station. Facilities at railway station should be improved to attract people using the facilities.

  4. Space station ventilation study

    Science.gov (United States)

    Colombo, G. V.; Allen, G. E.

    1972-01-01

    A ventilation system design and selection method which is applicable to any manned vehicle were developed. The method was used to generate design options for the NASA 33-foot diameter space station, all of which meet the ventilation system design requirements. System characteristics such as weight, volume, and power were normalized to dollar costs for each option. Total system costs for the various options ranged from a worst case $8 million to a group of four which were all approximately $2 million. A system design was then chosen from the $2 million group and is presented in detail. A ventilation system layout was designed for the MSFC space station mockup which provided comfortable, efficient ventilation of the mockup. A conditioned air distribution system design for the 14-foot diameter modular space station, using the same techniques, is also presented. The tradeoff study resulted in the selection of a system which costs $1.9 million, as compared to the alternate configuration which would have cost $2.6 million.

  5. Space Station fluid management logistics

    Science.gov (United States)

    Dominick, Sam M.

    1990-01-01

    Viewgraphs and discussion on space station fluid management logistics are presented. Topics covered include: fluid management logistics - issues for Space Station Freedom evolution; current fluid logistics approach; evolution of Space Station Freedom fluid resupply; launch vehicle evolution; ELV logistics system approach; logistics carrier configuration; expendable fluid/propellant carrier description; fluid carrier design concept; logistics carrier orbital operations; carrier operations at space station; summary/status of orbital fluid transfer techniques; Soviet progress tanker system; and Soviet propellant resupply system observations.

  6. Air and radiation monitoring stations

    CERN Multimedia

    AUTHOR|(SzGeCERN)582709

    2015-01-01

    CERN has around 100 monitoring stations on and around its sites. New radiation measuring stations, capable of detecting even lower levels of radiation, were installed in 2014. Two members of HE-SEE group (Safety Engineering and Environment group) in front of one of the new monitoring stations.

  7. Thermal management of space stations

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Thermal management aims at making full use of energy resources available in the space station to reduce energy consumption, waste heat rejection and the weight of the station. It is an extension of the thermal control. This discussion introduces the concept and development of thermal management, presents the aspects of thermal management and further extends its application to subsystems of the space station.

  8. Converter station of Juebek; Umrichterwerk Juebek

    Energy Technology Data Exchange (ETDEWEB)

    Zimmert, G. [AEG Bahnfahrwegsysteme GmbH, Frankfurt am Main (Germany); Scheuring, J. [AEG Bahnfahrwegsysteme GmbH, Frankfurt am Main (Germany); Werth, L. [AEG Bahnfahrwegsysteme GmbH, Frankfurt am Main (Germany); Koeltzsch, W. [Deutsche Bahn AG, Hamburg (Germany); Niehage, H. [AEG Anlagen- und Antriebssysteme GmbH, Berlin (Germany); Tadros, Y. [Daimler Benz AG, Berlin (Germany). Forschungsinstitut fuer Antriebstechnik und Leistungselektronik

    1995-09-01

    Most northern electrified lines in Schleswig-Holstein will be supplied with a.c. 16 2/3 Hz 15 kV traction energy from de-central converter station of Juebek which is under construction as a turn-key project. Converter technology based on semiconductor power elements will replace the conventional technology of rotating converters in the future. The paper gives a survey about importance and conception of Juebek converter station, incorporated technology and its state of construction. (orig.) [Deutsch] Zur Bahnenergieversorgung des noerdlichsten Bereiches der elektrifizierten Strecken in Schleswig-Holstein mit AC 16 2/3 Hz 15 kV wird zur Zeit das dezentrale Umrichterwerk Juebek als schluesselfertige Anlage errichtet. Die Umrichtertechnik auf der Basis leistungselektronischer Stromrichter wird in den kommenden Jahren die bisherige Maschinenumformertechnik abloesen. Der Beitrag gibt einen Ueberblick ueber die Bedeutung und das Konzept des Umrichterwerkes Juebek, die eingesetzte Technik und den Stand des Bauablaufes. (orig.)

  9. La “fisiología de la ciudad”: médicos, e ingenieros en el Medellín de hace un siglo Urban physiology: physicians and engineers in Medellin, one century ago

    Directory of Open Access Journals (Sweden)

    Luis Fernando González Escobar

    2006-01-01

    Full Text Available Este texto explora el papel cumplido por los médicos en la regulación, el control y el planeamiento de la ciudad de Medellín entre finales del siglo XIX y principios del XX. Se plantea cómo la higiene como saber, importada de Europa por los médicos, orientó prácticas y fue otro de los parámetros del progreso y la civilización de la sociedad y la ciudad entre uno y otro siglo. De igual manera, se da cuenta del influjo que tuvieron el saber y la práctica de los médicos, desde distintas concepciones teóricas, para orientar tanto la higiene privada como la higiene pública de la ciudad. Se destaca la manera en que los médicos, como individuos u organización social, introdujeron sus percepciones, diagnósticos y propuestas sobre los problemas de la salud pública en conferencias, artículos y prácticas concretas que se expresaron en la arquitectura y el urbanismo de la ciudad; así, los médicos de Medellín lograron introducir políticas públicas para la reglamentación y el desarrollo urbano arquitectónico mucho antes que los ingenieros y los arquitectos; en este sentido fueron pioneros en la “planificación”de la ciudad. This paper explores the role accomplished by medical doctors in the regulation, management and planning of the city of Medellín between the XIX and XX centuries. Hygiene as a knowledge, imported by medical doctors from Europe, was applied and used as progress and development parameter for both the society and the city. From different theoretical perspectives, medical knowledge and practice had a vital impact on the definition of hygiene as a private and public matter. It is important to emphasize the approach that medical doctors, as individuals or as members of a social organization, shared their observations, diagnoses and strategies on public health problems not only in conferences and papers but also in tangible actions which are reflected in the architecture and urbanism of the city. In this manner

  10. A Central Brazil GT5 Event

    Science.gov (United States)

    Barros, L. V.; Assumpcao, M.; Caixeta, D.

    2013-05-01

    Ground-truth (GT) events, accurately located with a precision of 5 km (GT5 event) and associated travel times to regional stations are important in developing precise velocity models. The low Brazilian seismicity, with only three continental earthquakes of magnitude five in the last three decades, and the low number of seismic stations explain the difficulty to detect events at regional distances. In the world maps of GT events, Brazil appears almost empty. In Stable Continental Interiors, like Brazil, it is difficult to find an event fulfilling all the GT5 prerequisites, particularly in respect with the number of picked phases and azimuthal gaps. Recently PTS-CTBTO has organized meeting and workshops to encourage seismologists from South and Central America to cooperate with the work of identifying GT5 events in these countries, with a goal of developing a 3-dimentional velocity model for this part of the globe not covered yet like Europe and North America. As a result we studied a recent magnitude 5 event in Central Brazil detected by few regional stations. Aftershock studies with local stations, showed a fault 5 km long. Taking the mainshock epicenter as the center of fault the maximum error would be minimal, 2.5 km, assuming the events were located with zero uncertainty. The parameters depth and origin time source were precisely determined using correlations between waveforms of six events and stations corrections. The event magnitudes range from 3.5 to 5.0 (mainshock, taken as reference event) recorded by regional and local stations. Events recorded at local and regional stations were used to determine the regional station corrections. These events were located only with data from local stations, assigning to the regional stations P and S phases zero weight in order to determine residuals for each regional stations used. The stations corrections were taken as the average of the residuals at each station. Precise pickings of P and S phases for the mainshock

  11. Space station: Cost and benefits

    Science.gov (United States)

    1983-01-01

    Costs for developing, producing, operating, and supporting the initial space station, a 4 to 8 man space station, and a 4 to 24 man space station are estimated and compared. These costs include contractor hardware; space station assembly and logistics flight costs; and payload support elements. Transportation system options examined include orbiter modules; standard and extended duration STS fights; reusable spacebased perigee kick motor OTV; and upper stages. Space station service charges assessed include crew hours; energy requirements; payload support module storage; pressurized port usage; and OTV service facility. Graphs show costs for science missions, space processing research, small communication satellites; large GEO transportation; OVT launch costs; DOD payload costs, and user costs.

  12. US central station nuclear electric generating units: significant milestones

    International Nuclear Information System (INIS)

    Listings of US nuclear power plants include significant dates, reactor type, owners, and net generating capacity. Listings are made by state, region, and utility. Tabulations of status, schedules, and orders are also presented

  13. Mir Space Station

    Science.gov (United States)

    1997-01-01

    This is a view of the Russian Mir Space Station photographed by a crewmember of the fifth Shuttle/Mir docking mission, STS-81. The image shows: upper center - Progress supply vehicle, Kvant-1 module, and Core module; center left - Priroda module; center right - Spektr module; bottom left - Kvant-2 module; bottom center - Soyuz; and bottom right - Kristall module and Docking module. The Progress was an unmarned, automated version of the Soyuz crew transfer vehicle, designed to resupply the Mir. The Kvant-1 provided research in the physics of galaxies, quasars, and neutron stars, by measuring electromagnetic spectra and x-ray emissions. The Core module served as the heart of the space station and contained the primary living and working areas, life support, and power, as well as the main computer, communications, and control equipment. Priroda's main purpose was Earth remote sensing. The Spektr module provided Earth observation. It also supported research into biotechnology, life sciences, materials science, and space technologies. American astronauts used the Spektr as their living quarters. Kvant-2 was a scientific and airlock module, providing biological research, Earth observations, and EVA (extravehicular activity) capability. The Soyuz typically ferried three crewmembers to and from the Mir. A main purpose of the Kristall module was to develop biological and materials production technologies in the space environment. The Docking module made it possible for the Space Shuttle to dock easily with the Mir. The journey of the 15-year-old Russian Mir Space Station ended March 23, 2001, as the Mir re-entered the Earth's atmosphere and fell into the south Pacific Ocean.

  14. Capacity at Railway Stations

    DEFF Research Database (Denmark)

    Landex, Alex

    2011-01-01

    zone(s) the possible conflicts with other trains (also in the opposite direction) are taken into account leading to more trustworthy results. Although the UIC 406 methodology proposes that the railway network should be divided into line sections when trains turn around and when the train order...... is changed, this paper recommends that the railway lines are not always be divided. In case trains turn around on open (single track) line, the capacity consumption may be too low if a railway line is divided. The same can be the case if only few trains are overtaken at an overtaking station. For dead end...

  15. Designing Space Station

    Science.gov (United States)

    1986-01-01

    An overview of preparations for the construction of Space Station Freedom (SSF) is presented. The video includes footage of astronauts testing materials for erectable structures in space both in the Shuttle bay while in orbit and in a neutral buoyancy tank at McDonald Douglas' Underwater Test Facility. Also shown are footage of robot systems that will assist the astronauts in building SSF, a computer simulation of an Orbiting Maneuvering Vehicle, solar dynamic mirrors that will power SSF, and mockups of the living quarters of the SSF.

  16. Submerged AUV Charging Station

    Science.gov (United States)

    Jones, Jack A.; Chao, Yi; Curtin, Thomas

    2014-01-01

    Autonomous Underwater Vehicles (AUVs) are becoming increasingly important for military surveillance and mine detection. Most AUVs are battery powered and have limited lifetimes of a few days to a few weeks. This greatly limits the distance that AUVs can travel underwater. Using a series of submerged AUV charging stations, AUVs could travel a limited distance to the next charging station, recharge its batteries, and continue to the next charging station, thus traveling great distances in a relatively short time, similar to the Old West “Pony Express.” One solution is to use temperature differences at various depths in the ocean to produce electricity, which is then stored in a submerged battery. It is preferred to have the upper buoy submerged a reasonable distance below the surface, so as not to be seen from above and not to be inadvertently destroyed by storms or ocean going vessels. In a previous invention, a phase change material (PCM) is melted (expanded) at warm temperatures, for example, 15 °C, and frozen (contracted) at cooler temperatures, for example, 8 °C. Tubes containing the PCM, which could be paraffin such as pentadecane, would be inserted into a container filled with hydraulic oil. When the PCM is melted (expanded), it pushes the oil out into a container that is pressurized to about 3,000 psi (approx equals 20.7 MPa). When a valve is opened, the high-pressure oil passes through a hydraulic motor, which turns a generator and charges a battery. The low-pressure oil is finally reabsorbed into the PCM canister when the PCM tubes are frozen (contracted). Some of the electricity produced could be used to control an external bladder or a motor to the tether line, such that depth cycling is continued for a very long period of time. Alternatively, after the electricity is generated by the hydraulic motor, the exiting low-pressure oil from the hydraulic motor could be vented directly to an external bladder on the AUV, such that filling of the bladder

  17. Automatic data-quality monitoring for continuous GPS tracking stations in Taiwan

    Science.gov (United States)

    Yeh, T. K.; Wang, C. S.; Chao, B. F.; Chen, C. S.; Lee, C. W.

    2007-10-01

    Taiwan has more than 300 Global Positioning System (GPS) tracking stations maintained by the Ministry of the Interior (MOI), Academia Sinica, the Central Weather Bureau and the Central Geological Survey. In the future, GPS tracking stations may replace the GPS control points after being given a legal status. Hence, the data quality of the tracking stations is an increasingly significant factor. This study considers the feasibility of establishing a system for monitoring GPS receivers. This investigation employs many data-quality indices and examines the relationship of these indices and the positioning precision. The frequency stability of the GPS receiver is the most important index; the cycle slip is the second index and the multipath is the third index. An auto-analytical system for analysing GPS data quality and monitoring the MOI's tracking stations can quickly find and resolve problems, or changes in station environment, to maintain high data quality for the tracking stations.

  18. Integrated management model. Methodology and software-enabled tood designed to assist a utility in developing a station-wide optimization; Modelo de gestion integrada del activo. Una Metodologia para la Optimizacion Economica de la Gestion del Envejecimiento y la Fiabilidad de los Equipos de la Central

    Energy Technology Data Exchange (ETDEWEB)

    Llovet, R.; Ibanez, R.; Woodcock, J.

    2005-07-01

    A key concern for utilities today is optimizing station aging and realibility management activities in a manner that maximizes the value of those activities withing an affordable budget. The Westinghouse Proactive Asset Management Model is a methodology and software-enabled tood designed to assist a utility in developing a station-wide optimization of those activities. The process and tool support the development of an optimized, station-wide plan for inspection, testing, maintenance, repaor and replacement of aging components. The optimization identifies the benefit and optimal timing of those activities based on minimizing unplanned outage costs (avoided costs) and maximizing station Net Present Value. (Author)

  19. NCERA-101 Station Report from Kennedy Space Center, FL, USA

    Science.gov (United States)

    Massa, Gioia D.; Wheeler, Raymond M.

    2014-01-01

    This is our annual report to the North Central Extension Research Activity, which is affiliated with the USDA and Land Grant University Agricultural Experiment Stations. I have been a member of this committee for 25 years. The presentation will be given by Dr. Gioia Massa, Kennedy Space Center

  20. Hinkley Point 'C' power station public inquiry: statement of case

    International Nuclear Information System (INIS)

    This Statement of Case contains full particulars of the case which the Central Electricity Generating Board (CEGB) proposes to put forward at the Hinkley Point ''C'' Inquiry. It relates to the planning application made by the CEGB for the construction of a 1200 MW Pressurized Water Reactor (PWR) power station at Hinkley Point in the United Kingdom, adjacent to an existing nuclear power station. The inquiry will consider economic, safety, environmental and planning matters relevant to the application and the implications for agriculture and local amenities of re-aligning two power transmission lines. The Statement contains submissions on the following matters: Topic 1 The Requirement for the Station; Topic 2 Safety and Design, including Radioactive Discharges; Topic 3 The On-Site Management of Radioactive Waste and Decommissioning of the Station; Topic 4 Emergency Arrangements; Topic 5 Local and Environmental Issues. (author)

  1. Exobiology experiments for space station

    Science.gov (United States)

    Devincenzi, D. L.; Griffiths, L. D.

    1985-01-01

    The benefits the Space Station could provide to the study of the origin, evolution, and distribution of life throughout the universe are described. Space Station experiments relevant to the cosmic evolution of biogenic elements and compounds, prebiotic chemical evolution, early evolution of life, and the evolution of advanced life forms are examined. The application of astronomical and astrometric observations to be obtained from the Space Station to the origin of life research is discussed.

  2. Discharges from nuclear power stations

    International Nuclear Information System (INIS)

    HM Inspectorate of Pollution commissioned, with authorising responsibilities in England and Wales, a study into the discharges of radioactive effluents from Nuclear Power Stations. The study considered arisings from nuclear power stations in Europe and the USA and the technologies to treat and control the radioactive discharges. This report contains details of the technologies used at many nuclear power stations to treat and control radioactive discharges and gives, where information was available, details of discharges and authorised discharge limits. (author)

  3. Space station furnace facility

    Science.gov (United States)

    Cobb, Sharon D.; Lehoczky, Sandor L.

    1996-07-01

    The Space Shuttle Furnace Facility (SSFF) is the modular, multi-user scientific instrumentation for conducting materials research in the reduced gravity environment of the International Space Station. The facility is divided into the Core System and two Instrument Racks. The core system provides the common electrical and mechanical support equipment required to operate experiment modules (EMs). The EMs are investigator unique furnaces or apparatus designed to accomplish specific science investigations. Investigations are peer selected every two years from proposals submitted in response to National Aeronautics and Space Administration Research Announcements. The SSFF Core systems are designed to accommodate an envelope of eight types of experiment modules. The first two modules to be developed for the first instrument rack include a high temperature gradient furnace with quench, and a low temperature gradient furnace. A new EM is planned to be developed every two years.

  4. Local control stations

    International Nuclear Information System (INIS)

    This paper describes research concerning the effects of human engineering design at local control stations (i.e., operator interfaces located outside the control room) on human performance and plant safety. The research considered both multifunction panels (e.g. remote shutdown panels) as well as single-function interfaces (e.g., valves, breakers, gauges, etc.). Changes in performance shaping factors associated with variations in human engineering at LCSs were estimated based on expert opinion. By means of a scaling procedure, these estimates were used to modify the human error probabilities in a PRA model, which was then employed to generate estimates of plant risk and scoping-level value/impact ratios for various human engineering upgrades. Recent documentation of human engineering deficiencies at single-function LCSs was also reviewed, and an assessment of the current status of LCSs with respect to human engineering was conducted

  5. Photochemical Assessment Monitoring Stations (PAMS)

    Data.gov (United States)

    U.S. Environmental Protection Agency — Photochemical Assessment Monitoring Stations (PAMS). This file provides information on the numbers and distribution (latitude/longitude) of air monitoring sites...

  6. Agricultural Experiment Stations and Branch Stations in the United States

    Science.gov (United States)

    Pearson, Calvin H.; Atucha, Amaya

    2015-01-01

    In 1887, Congress passed the Hatch Act, which formally established and provided a funding mechanism for agricultural experiment stations in each state and territory in the United States. The main purpose of agricultural experiment stations is to conduct agricultural research to meet the needs of the citizens of the United States. The objective of…

  7. Papel de la modelación matemática en la formación de los ingenieros // Role of mathematical modeling in the training of engineers

    Directory of Open Access Journals (Sweden)

    María Lucía Brito-Vallina

    2011-05-01

    Full Text Available Existe una enorme brecha entre las habilidades matemáticas que requiere el ingeniero, vinculadasfundamentalmente a las actividades de modelar, interpretar, comunicarse en un lenguaje preciso,etc., y las habilidades que se forman en los cursos de Matemática, que ponen su mayor énfasis en laactividad de resolver ejercicios de cálculo. Son variadas las causas de este fenómeno, que no esexclusivo de Cuba. El conocimiento científico en general, es concebido por las prácticas sociales, ysin embargo se ha considerado en muchas ocasiones el estudio de las matemáticas como el trabajocon conceptos abstractos, es decir alejados de la actividad humana. La modelación matemática deproblemas, crea en los estudiantes una capacidad y habilidad necesarias para la solución deposibles problemas prácticos.El presente trabajo tiene como objetivo proponer una estrategia metodológica que posibiliteestructurar de modo sistémico el desarrollo de la habilidad de modelar, teniendo en cuenta laclasificación de los principales modelos matemáticos para las ingenierías; según la teoría o técnicautilizada en su elaboración, la naturaleza de los procesos que desarrollan, su estructura matemáticay otras, sin obviar por supuesto, el perfil del profesional de estas carreras y las principalescategorías didácticas del proceso de enseñanza – aprendizaje.Palabras claves: matemática, modelación, ingeniería.__________________________________________________________________AbstractThere is a huge gap between the mathematical skills required by the engineer, primarily related to the activitiesof modeling, interpreting, communicating in precise language, etc., And skills that form in the courses ofMathematics and listed in the programs study, which put the most emphasis on solving activity calculationexercises. There are several causes of this phenomenon which is not unique to Cuba. Scientific knowledge isgenerally conceived by social practices, has emerged and

  8. Stanwell power station project

    Energy Technology Data Exchange (ETDEWEB)

    Mills, David R; J Dey, Christopher [University of Sidney, Sidney (Australia); Morrison, Graham L [University of New South Wales, Sidney (Australia)

    2000-07-01

    This paper describes the Compact Linear Fresnel Reflector (CLFR) being developed for installation at the Stanwell power station in Queensland Australia. Stanwell Corporation Limited (SCL). Solahart International, Solsearch Pty. Ltd. And the universities of Sidney and New South Wales are cooperating in the project, and this first plant being partly funded by the Australian Greenhouse Office. The solar plant will be attached to a 1440 MW(e) coal fired plant. The 17000 m{sup 2} array will be the largest array in Australia, producing a peak of 13 MW of thermal energy which will offset the use of coal in the generation of electricity. It will use direct steam generation and will feed either steam or hot water at 265 Celsius degrees directly into the power station preheating cycle. The CLFR system, first developed by the University of Sidney and Solsearch Pty. Ltd., is simple and offers small reflector size, low structural cost, fixed receiver geometry. Initial installed plant costs are approximately US$1000 per kWe, but this includes the effect of high up-front design costs and the cost should drop substantially in the second and subsequent plants. [Spanish] Proyecto de la Planta Electrica Stanwell este articulo describe el Reflector Lineal Compacto Fresnel (CLFR, siglas en ingles) que se esta desarrollando para la instalacion de la planta electrica Stanwell en Queensland, Australia. La Corporacion Stanwell Limited (SCL), Solahart International, Solsearch Pty. Ltd., las universidades de Sidney y de New South Wales estan cooperando en este proyecto, y esta primera planta esta parcialmente auspiciada por la Australian Greenhouse Office. La planta solar sera anexa a una planta de carbon de 1440 MW(e). Este arreglo de 17000 m{sup 2} sera el mayor en Australia y producira un maximo de 13 MW en energia termica la cual contrarrestara el uso del carbon en la generacion de electricidad. Utilizara generacion con vapor directo y alimentara ya sea vapor o agua caliente a 265 grados

  9. Sighting the International Space Station

    Science.gov (United States)

    Teets, Donald

    2008-01-01

    This article shows how to use six parameters describing the International Space Station's orbit to predict when and in what part of the sky observers can look for the station as it passes over their location. The method requires only a good background in trigonometry and some familiarity with elementary vector and matrix operations. An included…

  10. Current NASA space station planning

    Science.gov (United States)

    Culbertson, P. E.

    1982-01-01

    Design considerations, trials, and actions both taken and necessary in the future which lead to the establishment of a space station by NASA are reviewed. Human performance on board Skylab demonstrated the feasibility and benefits of continuous operation of a space station. The manned orbital systems concept (MOSC) program, keeping in close contact with potential users, resulted in station requirements which included support for 720 day missions, up to four specialists per payload, 8-10 kW power, a 230 x 200 n mi altitude orbit, orbit change capability of 28.5 deg, all attitude orientation, and stability to within 1,100,000 g. Although the concept will not be funded, it provides a guide for incremental growth of a manned station from previously unmanned science platforms. Initiation of hardware development is projected for 1984-85. The agencies, both domestic and international, and missions for which the station will be built, are discussed.

  11. Accelerated GLAS exposure station

    International Nuclear Information System (INIS)

    The Geoscience Laser Altimeter System (GLAS) is being developed by NASA/GSFC to measure the dynamics of the ice sheet mass balance, land, and cloud and atmospheric properties. An instrument altimetric resolution of 10 cm per shot is required. The laser transmitter will be a diode pumped, Q-switched, Nd:YAG laser producing 1064 nm, 100 mJ, 4 ns pulses at 40 Hz repetition rate in a TEM∞ mode. A minimum lifetime goal of 2 billion shots is required per laser transmitter. The performance of the GLAS laser can be limited by physical damage to the optical components caused by the interaction of intense laser energy with the optical coatings and substrates. Very little data exists describing the effects of long duration laser exposure, of 4 ns pulses, on an optical component. An Accelerated GLAS Exposure Station (AGES) is being developed which will autonomously operate and monitor the GLAS laser at an accelerated rate of 500 Hz. The effects of a large number of laser shots will be recorded. Parameters to be monitored include: laser power, pulsewidth, beam size, laser diode drive current and power, Q-switch drive voltage, temperature, and humidity. For comparison, one set of AGES-sister optical components will be used in the non-accelerated GLAS laser and another will be evaluated by a commercial optical damage test facility

  12. Swedish encapsulation station review

    International Nuclear Information System (INIS)

    In the Encapsulation Station (ES) Review performed by NAC International, a number of different areas have been studied. The main objectives with the review have been to: Perform an independent review of the cost estimates for the ES presented in SKB's document 'Plan 1996'. This has been made through comparisons between the ES and BNFL's Waste Encapsulation Plant (WEP) at Sellafield as well as with the CLAB facility. Review the location of the ES (at the CLAB site or at the final repository) and its interaction with other parts of the Swedish system for spent fuel management. Review the logistics and plant capacity of the ES. Identify important safety aspects of the ES as a basis for future licensing activities. Based on NAC International's experience of casks for transport and storage of spent fuel, review the basic design of the copper/steel canister and the transport cask. This review insides design, manufacturing, handling and licensing aspects. Perform an overall comparison between the ES project and the CLAB project with the objective to identify major project risks and discuss their mitigation

  13. Swedish encapsulation station review

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Sven Olof; Brunzell, P.; Heibel, R.; McCarthy, J.; Pennington, C.; Rusch, C.; Varley, G. [NAC International, Zuerich (Switzerland)

    1998-06-01

    In the Encapsulation Station (ES) Review performed by NAC International, a number of different areas have been studied. The main objectives with the review have been to: Perform an independent review of the cost estimates for the ES presented in SKB`s document `Plan 1996`. This has been made through comparisons between the ES and BNFL`s Waste Encapsulation Plant (WEP) at Sellafield as well as with the CLAB facility. Review the location of the ES (at the CLAB site or at the final repository) and its interaction with other parts of the Swedish system for spent fuel management. Review the logistics and plant capacity of the ES. Identify important safety aspects of the ES as a basis for future licensing activities. Based on NAC International`s experience of casks for transport and storage of spent fuel, review the basic design of the copper/steel canister and the transport cask. This review insides design, manufacturing, handling and licensing aspects. Perform an overall comparison between the ES project and the CLAB project with the objective to identify major project risks and discuss their mitigation 19 refs, 9 figs, 35 tabs

  14. 47 CFR 97.109 - Station control.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Station control. 97.109 Section 97.109... SERVICE Station Operation Standards § 97.109 Station control. (a) Each amateur station must have at least one control point. (b) When a station is being locally controlled, the control operator must be at...

  15. 47 CFR 97.207 - Space station.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Space station. 97.207 Section 97.207... SERVICE Special Operations § 97.207 Space station. (a) Any amateur station may be a space station. A holder of any class operator license may be the control operator of a space station, subject to...

  16. Biotechnology opportunities on Space Station

    Science.gov (United States)

    Deming, Jess; Henderson, Keith; Phillips, Robert W.; Dickey, Bernistine; Grounds, Phyllis

    1987-01-01

    Biotechnology applications which could be implemented on the Space Station are examined. The advances possible in biotechnology due to the favorable microgravity environment are discussed. The objectives of the Space Station Life Sciences Program are: (1) the study of human diseases, (2) biopolymer processing, and (3) the development of cryoprocessing and cryopreservation methods. The use of the microgravity environment for crystal growth, cell culturing, and the separation of biological materials is considered. The proposed Space Station research could provide benefits to the fields of medicine, pharmaceuticals, genetics, agriculture, and industrial waste management.

  17. THE LICHENS OF NORTH CENTRAL OKLAHOMA

    Directory of Open Access Journals (Sweden)

    DARVIN WENDELL KECK

    2006-12-01

    Full Text Available Over 1,000 specimens of lichens were collected at 78 collecting stations in 11 counties of North Central Oklahoma during 1959 and 1960. The objectives were to identify lichens collected in the area; to establish a record of lichen distribution for each county in the area; and to analyze the ecological relationships.

  18. 47 CFR 80.107 - Service of private coast stations and marine-utility stations.

    Science.gov (United States)

    2010-10-01

    ...-utility stations. 80.107 Section 80.107 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED... Operating Procedures-Land Stations § 80.107 Service of private coast stations and marine-utility stations. A private coast station or a marine-utility station is authorized to transmit messages necessary for...

  19. Gravity Station Data for Spain

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The gravity station data total 28493 records. This data base was received in April 1997. Principal gravity parameters include Free-air Anomalies which have been...

  20. Interior Alaska Gravity Station Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The gravity station data total 9416 records. This data base was received in March 1997. Principal gravity parameters include Free-air Anomalies which have been...

  1. Gravity Station Data for Portugal

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The gravity station data total 3064 records. This data base was received in April 1997. Principal gravity parameters include Free-air Anomalies which have been...

  2. Space Station reference configuration description

    Science.gov (United States)

    1984-01-01

    The data generated by the Space Station Program Skunk Works over a period of 4 months which supports the definition of a Space Station reference configuration is documented. The data were generated to meet these objectives: (1) provide a focal point for the definition and assessment of program requirements; (2) establish a basis for estimating program cost; and (3) define a reference configuration in sufficient detail to allow its inclusion in the definition phase Request for Proposal (RFP).

  3. Space stations systems and utilization

    CERN Document Server

    Messerschmid, Ernst

    1999-01-01

    The design of space stations like the recently launched ISS is a highly complex and interdisciplinary task. This book describes component technologies, system integration, and the potential usage of space stations in general and of the ISS in particular. It so adresses students and engineers in space technology. Ernst Messerschmid holds the chair of space systems at the University of Stuttgart and was one of the first German astronauts.

  4. ANSS Backbone Station Quality Assessment

    Science.gov (United States)

    Leeds, A.; McNamara, D.; Benz, H.; Gee, L.

    2006-12-01

    In this study we assess the ambient noise levels of the broadband seismic stations within the United States Geological Survey's (USGS) Advanced National Seismic System (ANSS) backbone network. The backbone consists of stations operated by the USGS as well as several regional network stations operated by universities. We also assess the improved detection capability of the network due to the installation of 13 additional backbone stations and the upgrade of 26 existing stations funded by the Earthscope initiative. This assessment makes use of probability density functions (PDF) of power spectral densities (PSD) (after McNamara and Buland, 2004) computed by a continuous noise monitoring system developed by the USGS- ANSS and the Incorporated Research Institutions in Seismology (IRIS) Data Management Center (DMC). We compute the median and mode of the PDF distribution and rank the stations relative to the Peterson Low noise model (LNM) (Peterson, 1993) for 11 different period bands. The power of the method lies in the fact that there is no need to screen the data for system transients, earthquakes or general data artifacts since they map into a background probability level. Previous studies have shown that most regional stations, instrumented with short period or extended short period instruments, have a higher noise level in all period bands while stations in the US network have lower noise levels at short periods (0.0625-8.0 seconds), high frequencies (8.0- 0.125Hz). The overall network is evaluated with respect to accomplishing the design goals set for the USArray/ANSS backbone project which were intended to increase broadband performance for the national monitoring network.

  5. Internationalization of the Space Station

    Science.gov (United States)

    Lottmann, R. V.

    1985-01-01

    Attention is given to the NASA Space Station system elements whose production is under consideration by potential foreign partners. The ESA's Columbus Program declaration encompasses studies of pressurized modules, unmanned payload carriers, and ground support facilities. Canada has expressed interest in construction and servicing facilities, solar arrays, and remote sensing facilities. Japanese studies concern a multipurpose experimental module concept. Each of these foreign investments would expand Space Station capabilities and lay the groundwork for long term partnerships.

  6. Railway Station Role in Composing Urban Conflicts

    Directory of Open Access Journals (Sweden)

    Elisa Conticelli

    2011-12-01

    Full Text Available Despite railway infrastructure was the structural framework on which modern European States were developed, contributing to unify territories and to the establishment of Nations, right from the beginning, the relationship between railway and city has been characterized by physical, functional and social conflicts, mainly because of a lack of integration between infrastructural and urban policies, which have been produced strong conflicts during decades. These critical situations have concentrated on the railway stations surrounding areas, which have started symbolizing the main conflicts that are taking place inside the cities.Similarly to what happened in the XIX century, today railway is a strategic infrastructure for the European territory development, thanks to the introduction of high speed transport systems and the promotion of rail transport as a more sustainable transportation system, which can quickly connect metropolitan central areas, more and more impenetrable by private vehicles, and key functions centres for the contemporary urban systems.In this framework, railway stations are becoming public places representing a complex society which is more and more dedicated to motion; thus they offer an unmissable chance not only to carry out urban development and spatial cohesion policies, but also to compose old tensions caused by the sharing of physical space, which is more and more scarce and valuable, and by ghettoization phenomena which have been produced at local scale, between rail infrastructure and the surrounding urban context. Today, such conflicts are growing and they are involving many actors who express a lot of different interests, needs and expectations, relating to the station areas’ destiny.Starting from the analysis of some conflicting situations between rail stations and the surrounding areas which have took place until today, this paper investigates some recent renewal interventions on Italian and European main railway

  7. central t

    Directory of Open Access Journals (Sweden)

    Manuel R. Piña Monarrez

    2007-01-01

    Full Text Available Dado que la Regresión Ridge (RR, es una estimación sesgada que parte de la solución de la regresión de Mínimos Cuadrados (MC, es vital establecer las condiciones para las que la distribución central t de Student que se utiliza en la prueba de hipótesis en MC, sea también aplicable a la regresión RR. La prueba de este importante resultado se presenta en este artículo.

  8. CFD Simulation of Airflow in the Side-Platform Stations

    OpenAIRE

    Adibi Omid; Farhanieh Bijan; Afshin Hossein

    2015-01-01

    Design of an appropriate ventilation system is one of the main concerns in the construction of subways. In this paper, thermal comforts of side-platform stations are investigated by numerical methods. For the numerical simulation, grids are generated by structured methods and governing equations are discretized by finite volume methods. In the numerical simulation, second order upwind and second order central difference scheme are used to consider the convection and diffusion terms of momentu...

  9. On the Statistical Multiplexing Gain of Virtual Base Station Pools

    OpenAIRE

    Liu, Jingchu; Zhou, Sheng; Gong, Jie; Niu, Zhisheng; Xu, Shugong

    2014-01-01

    Facing the explosion of mobile data traffic, cloud radio access network (C-RAN) is proposed recently to overcome the efficiency and flexibility problems with the traditional RAN architecture by centralizing baseband processing. However, there lacks a mathematical model to analyze the statistical multiplexing gain from the pooling of virtual base stations (VBSs) so that the expenditure on fronthaul networks can be justified. In this paper, we address this problem by capturing the session-level...

  10. Introduction to Space Station Freedom

    Science.gov (United States)

    Kohrs, Richard

    NASA field centers and contractors are organized to develop 'work packages' for Space Station Freedom. Marshall Space Flight Center and Boeing are building the U.S. laboratory and habitation modules, nodes, and environmental control and life support system; Johnson Space Center and McDonnell Douglas are responsible for truss structure, data management, propulsion systems, thermal control, and communications and guidance; Lewis Research Center and Rocketdyne are developing the power system. The Canadian Space Agency (CSA) is contributing a Mobile Servicing Center, Special Dextrous Manipulator, and Mobile Servicing Center Maintenance Depot. The National Space Development Agency of Japan (NASDA) is contributing a Japanese Experiment Module (JEM), which includes a pressurized module, logistics module, and exposed experiment facility. The European Space Agency (ESA) is contributing the Columbus laboratory module. NASA ground facilities, now in various stages of development to support Space Station Freedom, include: Marshall Space Flight Center's Payload Operations Integration Center and Payload Training Complex (Alabama), Johnson Space Center's Space Station Control Center and Space Station Training Facility (Texas), Lewis Research Center's Power System Facility (Ohio), and Kennedy Space Center's Space Station Processing Facility (Florida). Budget appropriations impact the development of the Space Station. In Fiscal Year 1988, Congress appropriated only half of the funds that NASA requested for the space station program ($393 million vs. $767 million). In FY 89, NASA sought $967 million for the program, and Congress appropriated $900 million. NASA's FY 90 request was $2.05 billion compared to an appropriation of $1.75 billion; the FY 91 request was $2.45 billion, and the appropriation was $1.9 billion. After NASA restructured the Space Station Freedom program in response to directions from Congress, the agency's full budget request of $2.029 billion for Space Station

  11. 47 CFR 73.1820 - Station log.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Station log. 73.1820 Section 73.1820... Rules Applicable to All Broadcast Stations § 73.1820 Station log. (a) Entries must be made in the station log either manually by a person designated by the licensee who is in actual charge of...

  12. 47 CFR 80.409 - Station logs.

    Science.gov (United States)

    2010-10-01

    ... either at the principal control point of the station or electronically filed at the station licensee's... stations must maintain a log, whether by means of written or automatic logging or a combination thereof... antenna tower lights when the radio station has an antenna structure requiring illumination by part 17...

  13. Computer software design description for the Treated Effluent Disposal Facility (TEDF), Project L-045H, Operator Training Station (OTS)

    International Nuclear Information System (INIS)

    The Treated Effluent Disposal Facility (TEDF) Operator Training Station (OTS) is a computer-based training tool designed to aid plant operations and engineering staff in familiarizing themselves with the TEDF Central Control System (CCS)

  14. Novel Radio on Fiber Access Eliminating External Electric Power Supply at Base Station

    Institute of Scientific and Technical Information of China (English)

    Tetsuya; Miki; Katsuyasu; Kawano; Nobuo; Nakajima; Naoto; Kishi; Masaru; Miyamoto; Tetsu; Aoki

    2003-01-01

    A novel Radio On Fiber(ROF) access is proposed and demonstrated which enables the pico-cell Base Station (BS) for high-speed wireless communications to eliminate external electric power supply facilities. We demonstrated 2.4-GHz band radio signal transmission through the BS without external electric power supply. The electrical power used for BS circuit is feeded by optical power over optical fiber from central station.

  15. 77 FR 16175 - Station Blackout

    Science.gov (United States)

    2012-03-20

    ... Rulemaking on Station Blackout Due to Coronal Mass Ejection D. Mitigating Strategies IV. Discussion and... petition for rulemaking (PRM), PRM-50-101 (76 FR 58165) as a way to address SBO mitigation. The approach... predecessor to the NRC, had yet to develop generic requirements for facility design criteria at that time....

  16. Space Station-Baseline Configuration

    Science.gov (United States)

    1989-01-01

    In response to President Reagan's directive to NASA to develop a permanent marned Space Station within a decade, part of the State of the Union message to Congress on January 25, 1984, NASA and the Administration adopted a phased approach to Station development. This approach provided an initial capability at reduced costs, to be followed by an enhanced Space Station capability in the future. This illustration depicts the baseline configuration, which features a 110-meter-long horizontal boom with four pressurized modules attached in the middle. Located at each end are four photovoltaic arrays generating a total of 75-kW of power. Two attachment points for external payloads are provided along this boom. The four pressurized modules include the following: A laboratory and habitation module provided by the United States; two additional laboratories, one each provided by the European Space Agency (ESA) and Japan; and an ESA-provided Man-Tended Free Flyer, a pressurized module capable of operations both attached to and separate from the Space Station core. Canada was expected to provide the first increment of a Mobile Serving System.

  17. Space Station reference configuration update

    Science.gov (United States)

    Bonner, Tom F., Jr.

    1985-01-01

    The reference configuration of the NASA Space Station as of November 1985 is presented in a series of diagrams, drawings, graphs, and tables. The configurations for components to be contributed by ESA, Canada, and Japan are included. Brief captions are provided, along with answers to questions raised at the conference.

  18. Remote input/output station

    CERN Multimedia

    1972-01-01

    A general view of the remote input/output station installed in building 112 (ISR) and used for submitting jobs to the CDC 6500 and 6600. The card reader on the left and the line printer on the right are operated by programmers on a self-service basis.

  19. The Medicina Station Status Report

    Science.gov (United States)

    Orfei, Alessandro; Orlati, Andrea; Maccaferri, Giuseppe

    2013-01-01

    General information about the Medicina Radio Astronomy Station, the 32-m antenna status, and the staff in charge of the VLBI observations is provided. In 2012, the data from geodetic VLBI observations were acquired using the Mark 5A recording system with good results. Updates of the hardware were performed and are briefly described.

  20. Development of a Turnkey Hydrogen Fueling Station Final Report

    Energy Technology Data Exchange (ETDEWEB)

    David E. Guro; Edward Kiczek; Kendral Gill; Othniel Brown

    2010-07-29

    The transition to hydrogen as a fuel source presents several challenges. One of the major hurdles is the cost-effective production of hydrogen in small quantities (less than 1MMscf/month). In the early demonstration phase, hydrogen can be provided by bulk distribution of liquid or compressed gas from central production plants; however, the next phase to fostering the hydrogen economy will likely include onsite generation and extensive pipeline networks to help effect a pervasive infrastructure. Providing inexpensive hydrogen at a fleet operator’s garage or local fueling station is a key enabling technology for direct hydrogen Fuel Cell Vehicles (FCVs). The objective of this project was to develop a comprehensive, turnkey, stand-alone, commercial hydrogen fueling station for FCVs with state-of-the-art technology that is cost-competitive with current hydrocarbon fuels. Such a station would promote the advent of the hydrogen fuel economy for buses, fleet vehicles, and ultimately personal vehicles. Air Products, partnering with the U.S. Department of Energy (DOE), The Pennsylvania State University, Harvest Energy Technology, and QuestAir, developed a turnkey hydrogen fueling station on the Penn State campus. Air Products aimed at designing a station that would have 65% overall station efficiency, 82% PSA (pressure swing adsorption) efficiency, and the capability of producing hydrogen at $3.00/kg (gge) H2 at mass production rates. Air Products designed a fueling station at Penn State from the ground up. This project was implemented in three phases. The first phase evaluated the various technologies available in hydrogen generation, compression, storage, and gas dispensing. In the second phase, Air Products designed the components chosen from the technologies examined. Finally, phase three entailed a several-month period of data collection, full-scale operation, maintenance of the station, and optimization of system reliability and performance. Based on field data

  1. Tarapur atomic power station: analysis of station blackout scenario

    Energy Technology Data Exchange (ETDEWEB)

    Contractor, A.D.; Lele, H.G.; Vaze, K.K. [Bhabha Atomic Research Centre, Mumbai (India). Reactor Safety Division; Srivastava, A.

    2015-03-15

    India is currently operating two BWR built by General Electric Company. The design features of these reactors are similar to the Fukushima's BWR except some better containment features in Indian BWR. This paper discusses the enveloping scenario of station blackout of infinite duration with no operator action and no component failure. The paper describes the details of modelling the TAPS-BWR plant model including SCDAP modelling of reactor core in system code RELAP5 and further thermal hydraulic safety assessment of station blackout scenario. The analysis brought out effectively the response of the plant to this high-pressure severe accident scenario. The time line of the severe accident progression will give details of various stages of accident progression along with hydrogen generation, which will be useful in evolving suitable severe accident management guidelines.

  2. Metodología para la Implantación de un Sistema de Gestión por el Conocimiento en Empresas de Diseño y Servicios Ingenieros para el sector de la construcción en Cuba

    Directory of Open Access Journals (Sweden)

    Julio Alfredo García Caraballo

    2006-01-01

    Full Text Available En la ponencia se presenta la "Metodología para la Implantación de un Sistema de Gestión por el Conocimiento en Empresas de Diseño y Servicios Ingenieros para el sector de la construcción en Cuba " resultado de una investigación científica ejecutada por la Empresa de Proyectos de Arquitectura e Ingeniería de Matanzas con la colaboración de la Universidad de Matanzas "Camilo Cienfuegos" y que aplicada y validada en la primera permitió la creación de los cimientos de una cultura gerencial que reconoce el valor que tienen para una organización, el uso adecuado de la información y la insustituible importancia de utilizar y preservar los conocimientos adquiridos por los trabajadores en el transcurso del tiempo, que son a su vez parte estratégica de su patrimonio. Dicha metodología facilita extender esta cultura a todos los niveles de dirección de la organización y entre sus trabajadores, como vía para alcanzar la eficacia y eficiencia necesarias en nuestra economía.

  3. The First Station of the Long Wavelength Array

    CERN Document Server

    Henning, Patricia; Taylor, Gregory B; Craig, Joseph; Pihlström, Ylva; Rickard, Lee J; Clarke, Tracy E; Kassim, Namir E; Cohen, Aaron

    2010-01-01

    The Long Wavelength Array (LWA) will be a new multi-purpose radio telescope operating in the frequency range 10-88 MHz. Upon completion, LWA will consist of 53 phased array "stations" distributed over a region about 400 km in diameter in the state of New Mexico. Each station will consist of 256 pairs of dipole-type antennas whose signals are formed into beams, with outputs transported to a central location for high-resolution aperture synthesis imaging. The resulting image sensitivity is estimated to be a few mJy (5 sigma, 8 MHz, 2 polarizations, 1 hr, zenith) in 20-80 MHz; with resolution and field of view of (8", 8 deg) and (2",2 deg) at 20 MHz and 80 MHz, respectively. All 256 dipole antennas are in place for the first station of the LWA (called LWA-1), and commissioning activities are well underway. The station is located near the core of the EVLA, and is expected to be fully operational in early 2011.

  4. Discussion on telluric field and seismic activity in Central Greece

    OpenAIRE

    J. Zlotnicki; G. N. Tsokas; G. Vargemezis

    2000-01-01

    Two stations were installed in the Southeastern Thessaly basin (Central Greece), recording the geomagnetic and telluric fields from 1993 to 1996. The aim was to detect long-term abnormal changes of the telluric field, which were possibly related to imbedding earthquakes. Between January 1993 and October 1996, 213 and185 (Neraida and Mavrolofos stations respectively) abnormal changes of the telluric field were observed in association with the seismic activity. The duration of these changes var...

  5. Stations

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The National Flood Hazard Layer (NFHL) data incorporates all Digital Flood Insurance Rate Map(DFIRM) databases published by FEMA, and any Letters Of Map Revision...

  6. Space Station tethered elevator system

    Science.gov (United States)

    Haddock, Michael H.; Anderson, Loren A.; Hosterman, K.; Decresie, E.; Miranda, P.; Hamilton, R.

    1989-01-01

    The optimized conceptual engineering design of a space station tethered elevator is presented. The tethered elevator is an unmanned, mobile structure which operates on a ten-kilometer tether spanning the distance between Space Station Freedom and a platform. Its capabilities include providing access to residual gravity levels, remote servicing, and transportation to any point along a tether. The report discusses the potential uses, parameters, and evolution of the spacecraft design. Emphasis is placed on the elevator's structural configuration and three major subsystem designs. First, the design of elevator robotics used to aid in elevator operations and tethered experimentation is presented. Second, the design of drive mechanisms used to propel the vehicle is discussed. Third, the design of an onboard self-sufficient power generation and transmission system is addressed.

  7. Manned space stations - A perspective

    Science.gov (United States)

    Disher, J. H.

    1981-09-01

    The findings from the Skylab missions are discussed as they relate to the operations planning of future space stations such as Spacelab and the proposed Space Operations Center. Following a brief description of the Skylab spacecraft, the significance of the mission as a demonstration of the possibility of effecting emergency repairs in space is pointed out. Specific recommendations made by Skylab personnel concerning capabilities for future in-flight maintenance are presented relating to the areas of spacecraft design criteria, tool selection and spares carried. Attention is then given to relevant physiological findings, and to habitability considerations in the areas of sleep arrangements, hygiene, waste management, clothing, and food. The issue of contamination control is examined in detail as a potential major system to be integrated into future design criteria. The importance of the Skylab results to the designers of future space stations is emphasized.

  8. HSIP Fire Stations in New Mexico

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — Fire Stations in New Mexico Any location where fire fighters are stationed or based out of, or where equipment that such personnel use in carrying out their jobs is...

  9. 75 FR 22674 - Moynihan Station Development Project

    Science.gov (United States)

    2010-04-29

    ... Quality NEPA implementing regulations, 40 CFR parts 1500-1508, and the FRA NEPA procedures, 64 FR 28545... Federal Railroad Administration Moynihan Station Development Project AGENCY: Federal Railroad... comment period for the Moynihan Station Development Project Environmental Assessment. SUMMARY: The...

  10. Open System of Agile Ground Stations Project

    Data.gov (United States)

    National Aeronautics and Space Administration — There is an opportunity to build the HETE-2/TESS network of ground stations into an innovative and powerful Open System of Agile Stations, by developing a low-cost...

  11. Fortaleza Station Report for 2012

    Science.gov (United States)

    Kaufmann, Pierre; Pereira de Lucena, A. Macilio; Sombra da Silva, Adeildo

    2013-01-01

    This is a brief report about the activities carried out at the Fortaleza geodetic VLBI station (ROEN: R´adio Observat´orio Espacial do Nordeste), located in Eus´ebio, CE, Brazil, during the period from January until December 2012. The observing activities were resumed in May after the major maintenance that comprised the azimuth bearing replacement. The total observational experiments consisted of 103 VLBI sessions and continuous GPS monitoring recordings.

  12. North Central Project: Environment act proposal

    International Nuclear Information System (INIS)

    Manitoba Hydro proposes to construct a power transmission and distribution line system to connect 12 northern Manitoba communities to the utility's central power grid. The purpose of this North Central Project (NCP) is to provide reliable and unrestricted electric service to remote communities now largely receiving limited diesel-generated power. The NCP is composed of a 138-kV transmission line running ca 350 km from the Kelsey Generating Station, ca 160 km of 25-kV distribution lines, new transformer stations at four communities, upgraded internal distribution systems within the communities, removal of existing diesel stations and restoration of the sites, modifications and additions to the Kelsey switchyard, and a communications system. The NCP is described in detail, including proposed line routes and transformer station locations, rationales for site and route selection, projected impacts on the environment and local societies, and consultations with the communities to be affected. Potential impacts are expected to be modest, with few unmitigable adverse impacts and a number of potentially significant positive benefits. Impact management measures are proposed to prevent or mitigate adverse effects and to create or enhance positive impacts such as local employment of native peoples. 49 figs., 1 tab

  13. Microbiology on Space Station Freedom

    Science.gov (United States)

    Pierson, Duane L. (Editor); Mcginnis, Michael R. (Editor); Mishra, S. K. (Editor); Wogan, Christine F. (Editor)

    1991-01-01

    This panel discussion convened in Houston, Texas, at the Lunar and Planetary Institute, on November 6 to 8, 1989, to review NASA's plans for microbiology on Space Station Freedom. A panel of distinguished scientists reviewed, validated, and recommended revisions to NASA's proposed acceptability standards for air, water, and internal surfaces on board Freedom. Also reviewed were the proposed microbiology capabilities and monitoring plan, disinfection procedures, waste management, and clinical issues. In the opinion of this advisory panel, ensuring the health of the Freedom's crews requires a strong goal-oriented research effort to determine the potential effects of microorganisms on the crewmembers and on the physical environment of the station. Because there are very few data addressing the fundamental question of how microgravity influences microbial function, the panel recommended establishing a ground-based microbial model of Freedom, with subsequent evaluation using in-flight shuttle data. Sampling techniques and standards will be affected by both technological advances in microgravity-compatible instrumentation, and by changes in the microbial population over the life of the station.

  14. Package power stations for export

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    The cheap and efficient generation of power is an essential requirement for the success and prosperity of any community and is especially important to third world countries. It is therefore logical that the more technologically advanced nations should seek to produce power stations for the developing countries. Power plant can now be designed into a packaged form that may be readily exported and commissioned. This valuable and interesting collection of papers were originally presented at a seminar organised by the Power Industries Division of the Institution of Mechanical Engineers. Topics considered include the developing world market for packaged power stations using indigenous fuels; multi-fuel systems for power generation; packaging, modularisation, and containerisation of equipment for power boilers for export; compact coal-fired industrial plant; rural woodburning power stations; biomass gasification based power generation technology and potential; gas fed reciprocating engine development; packaged heavy duty gas turbines for power generation; and criteria for assessing the appropriateness of package power technologies in developing countries.

  15. Automatic Control of Water Pumping Stations

    Institute of Scientific and Technical Information of China (English)

    Muhannad Alrheeh; JIANG Zhengfeng

    2006-01-01

    Automatic Control of pumps is an interesting proposal to operate water pumping stations among many kinds of water pumping stations according to their functions.In this paper, our pumping station is being used for water supply system. This paper is to introduce the idea of pump controller and the important factors that must be considering when we want to design automatic control system of water pumping stations. Then the automatic control circuit with the function of all components will be introduced.

  16. 47 CFR 97.205 - Repeater station.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Repeater station. 97.205 Section 97.205... SERVICE Special Operations § 97.205 Repeater station. (a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be a repeater. A holder of...

  17. 47 CFR 87.109 - Station logs.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Station logs. 87.109 Section 87.109... Operating Requirements and Procedures Operating Procedures § 87.109 Station logs. (a) A station at a fixed location in the international aeronautical mobile service must maintain a log in accordance with Annex...

  18. 78 FR 44035 - Station Blackout Mitigation Strategies

    Science.gov (United States)

    2013-07-23

    ... COMMISSION 10 CFR Parts 50 and 52 RIN 3150-AJ08 Station Blackout Mitigation Strategies AGENCY: Nuclear... concerning nuclear power plant licensees' and applicants' station blackout mitigation strategies. The...-415- 4737, or by email to pdr.resource@nrc.gov . The regulatory basis document, ``Station...

  19. 78 FR 21275 - Station Blackout Mitigation Strategies

    Science.gov (United States)

    2013-04-10

    ...; ] NUCLEAR REGULATORY COMMISSION 10 CFR Parts 50 and 52 RIN 3150-AJ08 Station Blackout Mitigation Strategies... plant licensees' station blackout mitigation strategies. Appendix A of the draft regulatory basis... involving station blackout mitigation strategies, the NRC is making preliminary documents publicly...

  20. 47 CFR 97.203 - Beacon station.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Beacon station. 97.203 Section 97.203... SERVICE Special Operations § 97.203 Beacon station. (a) Any amateur station licensed to a holder of a Technician, Technician Plus, General, Advanced or Amateur Extra Class operator license may be a beacon....

  1. Standardized Curriculum for Service Station Retailing.

    Science.gov (United States)

    Mississippi State Dept. of Education, Jackson. Office of Vocational, Technical and Adult Education.

    This curriculum guide for service station retailing was developed by the state of Mississippi to standardize vocational education course titles and core contents. The objectives contained in this document are common to all service station retailing programs in the state. The guide contains objectives for service station retailing I and II courses.…

  2. 30 CFR 57.12085 - Transformer stations.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Transformer stations. 57.12085 Section 57.12085 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Underground Only § 57.12085 Transformer stations. Transformer stations shall be enclosed to prevent...

  3. CFD Simulation of Airflow in the Side-Platform Stations

    Directory of Open Access Journals (Sweden)

    Adibi Omid

    2015-01-01

    Full Text Available Design of an appropriate ventilation system is one of the main concerns in the construction of subways. In this paper, thermal comforts of side-platform stations are investigated by numerical methods. For the numerical simulation, grids are generated by structured methods and governing equations are discretized by finite volume methods. In the numerical simulation, second order upwind and second order central difference scheme are used to consider the convection and diffusion terms of momentum and energy equations, respectively. Results of this study show that in term of thermal comfort, region next to the hallway and the middle part of the platform is the worst zones of the station. In these zones, air velocity is very low (less than 0.5m/s and the air temperature reaches to 34°C which is more than its limit (Tmax≤32°C.

  4. Space station dynamics, attitude control and momentum management

    Science.gov (United States)

    Sunkel, John W.; Singh, Ramen P.; Vengopal, Ravi

    1989-01-01

    The Space Station Attitude Control System software test-bed provides a rigorous environment for the design, development and functional verification of GN and C algorithms and software. The approach taken for the simulation of the vehicle dynamics and environmental models using a computationally efficient algorithm is discussed. The simulation includes capabilities for docking/berthing dynamics, prescribed motion dynamics associated with the Mobile Remote Manipulator System (MRMS) and microgravity disturbances. The vehicle dynamics module interfaces with the test-bed through the central Communicator facility which is in turn driven by the Station Control Simulator (SCS) Executive. The Communicator addresses issues such as the interface between the discrete flight software and the continuous vehicle dynamics, and multi-programming aspects such as the complex flow of control in real-time programs. Combined with the flight software and redundancy management modules, the facility provides a flexible, user-oriented simulation platform.

  5. Spent fuel canister docking station

    Energy Technology Data Exchange (ETDEWEB)

    Suikki, M. [Afore Oy, Turku (Finland)

    2006-01-15

    The working report for the spent fuel canister docking station presents a design for the operation and structure of the docking equipment located in the fuel handling cell for the spent fuel in the encapsulation plant. The report contains a description of the basic requirements for the docking station equipment and their implementation, the operation of the equipment, maintenance and a cost estimate. In the designing of the equipment all the problems related with the operation have been solved at the level of principle, nevertheless, detailed designing and the selection of final components have not yet been carried out. In case of defects and failures, solutions have been considered for postulated problems, and furthermore, the entire equipment was gone through by the means of systematic risk analysis (PFMEA). During the docking station designing we came across with needs to influence the structure of the actual disposal canister for spent nuclear fuel, too. Proposed changes for the structure of the steel lid fastening screw were included in the report. The report also contains a description of installation with the fuel handling cell structures. The purpose of the docking station for the fuel handling cell is to position and to seal the disposal canister for spent nuclear fuel into a penetration located on the cell floor and to provide suitable means for executing the loading of the disposal canister and the changing of atmosphere. The designed docking station consists of a docking ring, a covering hatch, a protective cone and an atmosphere-changing cap as well as the vacuum technology pertaining to the changing of atmosphere and the inert gas system. As far as the solutions are concerned, we have arrived at rather simple structures and most of the actuators of the system are situated outside of the actual fuel handling cell. When necessary, the equipment can also be used for the dismantling of a faulty disposal canister, cut from its upper end by machining. The

  6. 47 CFR 90.476 - Interconnection of fixed stations and certain mobile stations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Interconnection of fixed stations and certain... Systems § 90.476 Interconnection of fixed stations and certain mobile stations. (a) Fixed stations and...)(11), 90.35(c)(42), and 90.267 are not subject to the interconnection provisions of §§ 90.477 and...

  7. Slotted Aloha for Networked Base Stations

    OpenAIRE

    Bajovic, Dragana; Jakovetic, Dusan; Vukobratovic, Dejan; Crnojevic, Vladimir

    2014-01-01

    We study multiple base station, multi-access systems in which the user-base station adjacency is induced by geographical proximity. At each slot, each user transmits (is active) with a certain probability, independently of other users, and is heard by all base stations within the distance $r$. Both the users and base stations are placed uniformly at random over the (unit) area. We first consider a non-cooperative decoding where base stations work in isolation, but a user is decoded as soon as...

  8. A customer-friendly Space Station

    Science.gov (United States)

    Pivirotto, D. S.

    1984-01-01

    This paper discusses the relationship of customers to the Space Station Program currently being defined by NASA. Emphasis is on definition of the Program such that the Space Station will be conducive to use by customers, that is by people who utilize the services provided by the Space Station and its associated platforms and vehicles. Potential types of customers are identified. Scenarios are developed for ways in which different types of customers can utilize the Space Station. Both management and technical issues involved in making the Station 'customer friendly' are discussed.

  9. Arduino adventures escape from Gemini station

    CERN Document Server

    Kelly, James Floyd

    2013-01-01

    Arduino Adventures: Escape from Gemini Station provides a fun introduction to the Arduino microcontroller by putting you (the reader) into the action of a science fiction adventure story.  You'll find yourself following along as Cade and Elle explore Gemini Station-an orbiting museum dedicated to preserving and sharing technology throughout the centuries. Trouble ensues. The station is evacuated, including Cade and Elle's class that was visiting the station on a field trip. Cade and Elle don't make it aboard their shuttle and are trapped on the station along with a friendly artificial intellig

  10. Crew Member Interface with Space Station Furnace Facility

    Science.gov (United States)

    Cash, Martha B.

    1997-01-01

    The Space Station Furnace Facility (SSFF) is a facility located in the International Space Station United States Laboratory (ISS US Lab) for materials research in the microgravity environment. The SSFF will accommodate basic research, commercial applications, and studies of phenomena of metals and alloys, electronic and photonic materials, and glasses and ceramics. To support this broad base of research requirements, the SSFF will operate, regulate, and support a variety of Experiment Modules (EMs). To meet station requirements concerning the microgravity level needed for experiments, station is providing an active vibration isolation system, and SSFF provides the interface. SSFF physically consists of a Core Rack and two instrument racks (IRs) that occupy three adjacent ISS US Lab rack locations within the International Space Station (ISS). All SSFF racks are modified International Standard Payload Racks (ISPR). SSFF racks will have a 50% larger pass through area on the lower sides than ISPRs to accommodate the many rack to rack interconnections. The Instrument Racks are further modified with lowered floors and an additional removable panel (15" x 22") on top of the rack for access if needed. The Core Rack shall contain all centralized Core subsystems and ISS subsystem equipment. The two Instrument Racks shall contain the distributed Core subsystem equipment, ISS subsystem equipment, and the EMs. The Core System, which includes the Core Rack, the IR structures, and subsystem components located in the IRs serves as the central control and management for the IRs and the EMs. The Core System receives the resources provided by the International Space Station (ISS) and modifies, allocates, and distributes these resources to meet the operational requirements of the furnace. The Core System is able to support a total of four EMs and can control, support, and activate/deactivate the operations of two EMs, simultaneously. The IRs can be configured to house two small EMs or

  11. Timber Mountain Precipitation Monitoring Station

    International Nuclear Information System (INIS)

    A precipitation monitoring station was placed on the west flank of Timber Mountain during the year 2010. It is located in an isolated highland area near the western border of the Nevada National Security Site (NNSS), south of Pahute Mesa. The cost of the equipment, permitting, and installation was provided by the Environmental Monitoring Systems Initiative (EMSI) project. Data collection, analysis, and maintenance of the station during fiscal year 2011 was funded by the U.S. Department of Energy, National Nuclear Security Administration, Nevada Site Office Environmental Restoration, Soils Activity. The station is located near the western headwaters of Forty Mile Wash on the Nevada Test and Training Range (NTTR). Overland flows from precipitation events that occur in the Timber Mountain high elevation area cross several of the contaminated Soils project CAU (Corrective Action Unit) sites located in the Forty Mile Wash watershed. Rain-on-snow events in the early winter and spring around Timber Mountain have contributed to several significant flow events in Forty Mile Wash. The data from the new precipitation gauge at Timber Mountain will provide important information for determining runoff response to precipitation events in this area of the NNSS. Timber Mountain is also a groundwater recharge area, and estimation of recharge from precipitation was important for the EMSI project in determining groundwater flowpaths and designing effective groundwater monitoring for Yucca Mountain. Recharge estimation additionally provides benefit to the Underground Test Area Sub-project analysis of groundwater flow direction and velocity from nuclear test areas on Pahute Mesa. Additionally, this site provides data that has been used during wild fire events and provided a singular monitoring location of the extreme precipitation events during December 2010 (see data section for more details). This letter report provides a summary of the site location, equipment, and data collected in

  12. Central Pain Syndrome

    Science.gov (United States)

    ... Enhancing Diversity Find People About NINDS NINDS Central Pain Syndrome Information Page Table of Contents (click to ... being done? Clinical Trials Organizations What is Central Pain Syndrome? Central pain syndrome is a neurological condition ...

  13. Central venous line - infants

    Science.gov (United States)

    CVL - infants; Central catheter - infants - surgically placed ... plastic tube that is put into a large vein in the chest. WHY IS A ... central catheter (PICC) or midline central catheter (MCC). A CVL ...

  14. Weather Monitoring Station: A Review

    Directory of Open Access Journals (Sweden)

    Mr. Dipak V. Sose

    2016-06-01

    Full Text Available Weather monitoring plays a very important role in human life hence study of weather system is necessary. Currently there are two types of the weather monitoring stations available i.e. wired and wireless. Wireless system has some advantages over the wired one hence popular now a days. The parameters are include in weather monitoring usually temperature, humidity atmospheric pressure, light intensity, rainfall etc. There are many techniques existed using different processor such as PIC, AVR, ARM etc. Analog to digital channel are used to fetch the analog output of the sensors. The wireless techniques used in the weather monitoring having GSM, FM channel, Zigbee, RF etc Protocols

  15. Steam turbines for PWR stations

    International Nuclear Information System (INIS)

    The thermodynamic cycle requirements and mechanical design features applying to modern GEC 3000 rev/min steam turbines for pressurised water reactor power stations are reviewed. The most recent developments include machines of 630 MW and 985 MW output which are currently under construction. The importance of service experience with nuclear wet steam turbines associated with a variety of types of water cooled reactor and its relevance to the design of modern 3000 rev/min turbines for pressurised water reactor applications is emphasised. (author)

  16. Supervision of the Natural Gas Station Using a SCADA System

    Directory of Open Access Journals (Sweden)

    LAKHOUA Mohamed Najeh

    2013-05-01

    Full Text Available The aim of this paper is to present a SCADA application of the natural gas station using the programming language C#. In fact, almost all critical industrial infrastructures and processes are managed remotely from central control rooms, using computers and communications networks. Thus, in this practical case the data is collected from six calculating Instromet model 782-20A using the serial protocol Modbus ASCII and operating in an IHM. This application contains also a database in order to store alarms and measures using the SQL software.

  17. 大规模光伏电站集中并网对电网的影响分析及对策%Analysis and Countermeasures on the Influence of Centralized Grid Connection of Large-scale Photovoltaic Power Stations upon Power Grid

    Institute of Scientific and Technical Information of China (English)

    秦睿; 董开松; 汪红燕; 杨萍; 刘海燕

    2014-01-01

    随着国家鼓励光伏发展政策的出台,新一轮光伏电站大规模建设已铺开。光伏电站类型复杂,其带来的控制、送出和消纳问题,对电网运行和稳定特性影响深刻,对电网安全带来了巨大挑战。针对大规模光伏电站并网发电后对电网运行的影响和分布式光伏发电对配网的影响,从大规模光伏电力的消纳与送出、运行与控制、电网调峰、安全稳定、电能质量和配电网电压控制、抗扰动能力等方面的因素进行了综合分析,提出了建立新能源技术支持系统平台和提高光伏集中接入地区电力外送及消纳能力等应对的措施。%Along with the introduction of state policies to stimulate PV development,a new round of construction of large-scale PV power stations is now in full swing.PV power stations of complicated types lead to such issues as control,sending and utilization exert a profound influence on the operation and stability of power grids,thus constituting a great challenge to grid safety.This paper makes a comprehensive analysis on the influence of grid connection of large scale photovoltaic power stations upon grid operation,influence of distributed photovoltaic power generation upon the distribution network,as well as utilization/sending,operation/control,grid regulation,safety/stability and energy quality of large scale photovoltaic power,as well as voltage control and anti-disturbance ability of the distribution network,and presents countermeasures including establishment of a new energy technical support platform and enhancement of power delivery and utilization ability of the area of concentrated grid connection.

  18. Variation in size, morphology and chemical composition of polymetallic nodules from the Central Indian Ocean Basin

    Digital Repository Service at National Institute of Oceanography (India)

    Valsangkar, A.B.; Karisiddaiah, S.M.; Parthiban, G.

    Chemical composition of 613 polymetallic nodules from 150 stations in the Central Indian Ocean Basin (CIOB) are determined and variations in Mn, Fe, Cu, Ni, Co, Zn and moisture content are studied with respect to their size and surface texture...

  19. Bacterial abundance and production in the central and eastern Arabian Sea

    Digital Repository Service at National Institute of Oceanography (India)

    Ramaiah, N.; Raghukumar, S.; Gauns, M.

    Seasonal and spatial variations in bacterial and picoplankton abundances and bacterial production (thymidine incorporation rates) were determined in the water column up to 150 m in several stations in the central and eastern Arabian Sea. Higher...

  20. Radio-location of mobile stations in third generation networks

    Directory of Open Access Journals (Sweden)

    Milan Manojle Šunjevarić

    2013-06-01

    direction, if specified by a direction on an object, (b circle, if determined by measuring the distance of an object, or (c a hyperbola, if the difference is determined by measuring the distance between two objects. In cellular networks, the location of mobile stations can be estimated roughly by proximity sensing methods and methods based on an evaluation of the characteristics of base stations (fingerprinting. Basic characteristics of the UMTS standard The radio network controller (RNC has three different roles and is therefore known as: Controlling RNC (CRNC, Serving RNC (SRNC and Drifting RNC (DRNC. The Local Measurement Unit (LMU performs radio measurements (measuring the delay of signals from base stations to the LMU and forwards the data to the CRNC. The main location functions are performed within the Serving RNC which can operate in two modes: RNC central and central SAS (Standalone SMLC. The RNC in the RNC central mode controls the flow of requirements for the localization, chooses the method of localization, provides information as necessary and, finally, estimates the location of the user. The SAS mode performs the procedures based on the requirements of the service radio network controller (SRNC. The SAS executes the global location (Global Navigation Satellite System and location on the uplink, based on measuring the time difference U-TDoA (Uplink - Time Difference of Arrival. Methods of locating the MS in a UMTS network In the UMTS network, depending on the used network infrastructure,  both the station and network-based method can be used, i.e. determining the MS location can be performed on the MS or on the network side. In UMTS networks, the following methods can be used: methods based on measurements in the time domain (time-based, methods based on measurements of a received power level (Received Signal Strength - RSS, methods based on measuring the angle under which the signal arrives to the receiving antenna and methods based on the global location

  1. Next-Generation GPS Station for Hazards Mitigation (Invited)

    Science.gov (United States)

    Bock, Y.

    2013-12-01

    traditional approaches where data are collected and analyzed from a network of stations at a central processing facility, we are embedding these capabilities in the Geodetic Module's processor for in situ analysis and data delivery through TCP/IP to avoid single points of failure during emergencies. We are infusing our technology to several local and state groups, including the San Diego County Office of Emergency Services for earthquake and tsunami early warnings, UC San Diego Health Services for hospital monitoring and early warning, Caltrans for bridge monitoring, and NOAA's Weather Forecasting Offices in San Diego and Los Angeles Counties for forecasting extreme weather events. We describe our overall system and the ongoing efforts at technology infusion.

  2. Polarographic determination of Iodide and Iodate, in Solutions Coming from Aerosols in Fission Products Containment Studies in Nuclear Power Stations; Determinacion Polarografica de Especies de Iodo (Ioduro y Iodato) en Soluciones Procedentes de Aerosoles, para Estudios de Contencion de Productos de Fision en Centrales Nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez, M.; Ballesteros, O.; Fernandez, M.; Clavero, M.; Gonzalez, A. M. [Ciemat, Madrid (Spain)

    2000-07-01

    A polarographic method is described for the iodine species determination, iodide and iodate in water solutions. the iodate can be determined by differential pulse polarography. Calibration curves and the detection and determination limits have been obtained. Iodides is oxidized to iodate with sodium hypochlorite and the excess of oxidizing agent is destroyed with sodium sulphide. The concentration of iodide is calculated as the difference between the concentration of iodate in the sample before and after the oxidation. As an application, species of iodine in samples coming from the experimental plants GIRS (Gaseous Iodine Removal by Sprays) of Nuclear Fission Department of the CIEMAT, dedicated to fission products containment studies in nuclear power station, were determined. (Author) 10 refs.

  3. Simulation of the steady state of the Laguna Verde Nuclear power station at full power (1931 MWt and 2027 Mwt) with the SCDAPSIM code; Simulacion del estado estacionario de la Central Nucleoelectrica de Laguna Verde a plena potencia (1931 MWt y 2027 MWt) con el codigo SCDAPSIM

    Energy Technology Data Exchange (ETDEWEB)

    Amador G, R.; Nunez C, A.; Mateos, E. del A. [Comision Nacional de Seguridad Nuclear y Salvaguardias, Mexico D.F. (Mexico)

    2001-07-01

    This document describes two models developed for the Laguna Verde Nuclear Power Station (LVNPP) using SCDAPSIM computer code. These models represent the LVNPP in normal operation with a nominal power of 1931 MWt and power uprate conditions of 2027 MWt. The steady states obtained by means of these models comply with the criteria established by the ANSI/ANS-3.5-1985 for nuclear power plant simulators. This criteria has been applied to the models of the LVNPP developed by CNSNS in want of some international accepted criteria for ''Best Estimation'' computer codes. These models will be the bases to carry out studies of validation of the own models as well as the analysis of diverse scenarios that evolve to a severe accident. (Author)

  4. Insurance of nuclear power stations

    International Nuclear Information System (INIS)

    Electrical utility companies have invested large sums in the establishment of nuclear facilities. For this reason it is normal for these companies to attempt to protect their investments as much as possible. One of the methods of protection is recourse to insurance. For a variety of reasons traditional insurance markets are unable to function normally for a number of reasons including, the insufficient number of risks, an absence of meaningful accident statistics, the enormous sums involved and a lack of familiarity with nuclear risks on the part of insurers, resulting in a reluctance or even refusal to accept such risks. Insurers have, in response to requests for coverage from nuclear power station operators, established an alternative system of coverage - insurance through a system of insurance pools. Insurers in every country unite in a pool, providing a net capacity for every risk which is a capacity covered by their own funds, and consequently without reinsurance. All pools exchange capacity. The inconvenience of this system, for the operators in particular, is that it involves a monopolistic system in which there are consequently few possibilities for the negotiation of premiums and conditions of coverage. The system does not permit the establishment of reserves which could, over time, reduce the need for insurance on the part of nuclear power station operators. Thus the cost of nuclear insurance remains high. Alternatives to the poor system of insurance are explored in this article. (author)

  5. Waste management at power stations

    International Nuclear Information System (INIS)

    Like most other industrial processes, nuclear power stations produce waste in gaseous, liquid and solid forms. Gaseous and liquid wastes are routinely discharged from the stations after suitable treatment, the residual radioactivity being diluted and dispersed in the environment. The discharges are controlled and authorised under the Radioactive Substances Act and the environmental impact is minimal. In recent years low level wastes (LLW) have been sent to BNFL's disposal site at Drigg. Recent charges at Drigg have resulted in changed arrangements for the transport and disposal of low level wastes. This disposal route will be used until an alternative facility is brought into operation. Consideration is being given to volume reduction by supercompaction. Small amounts of intermediate level waste (ILW) such as spent ion exchange resins are now stored pending the availability of a disposal route. Such as a mobile waste treatment plant. In the case of Magnox debris a demonstration dissolution plant has been constructed at Dungeness and this will significantly reduce the volume of waste being stored whilst retaining the bulk of the activity on site for later treatment. At Trawsfynydd a few debris store will hold the fuel element debris in 500 litre drums. (author)

  6. Space station operating system study

    Science.gov (United States)

    Horn, Albert E.; Harwell, Morris C.

    1988-01-01

    The current phase of the Space Station Operating System study is based on the analysis, evaluation, and comparison of the operating systems implemented on the computer systems and workstations in the software development laboratory. Primary emphasis has been placed on the DEC MicroVMS operating system as implemented on the MicroVax II computer, with comparative analysis of the SUN UNIX system on the SUN 3/260 workstation computer, and to a limited extent, the IBM PC/AT microcomputer running PC-DOS. Some benchmark development and testing was also done for the Motorola MC68010 (VM03 system) before the system was taken from the laboratory. These systems were studied with the objective of determining their capability to support Space Station software development requirements, specifically for multi-tasking and real-time applications. The methodology utilized consisted of development, execution, and analysis of benchmark programs and test software, and the experimentation and analysis of specific features of the system or compilers in the study.

  7. STRUVE arc and EUPOS® stations

    Science.gov (United States)

    Lasmane, Ieva; Kaminskis, Janis; Balodis, Janis; Haritonova, Diana

    2013-04-01

    The Struve Geodetic Arc was developed in Years 1816 to 1855, 200 years ago. Historic information on the points of the Struve Geodetic Arc are included in the UNESCO World Heritage list in 2005. Nevertheless, the sites of many points are still not identified nor included in the data bases nowadays. Originally STRUVE arc consisted of 258 main triangles with 265 triangulation points. Currently 34 of the original station points are identified and included in the in the UNESCO World Heritage list. identified original measurement points of the Meridian Arc are located in Sweden (7 points), Norway (15), Finland (83), Russia (1), Estonia (22), Latvia (16), Lithuania (18), Belorussia (28), Ukraine (59) and Moldova (27). In Year 2002 was initiated another large coverage project - European Position Determination System "EUPOS®". Currently there are about 400 continuously operating GNSS (Global Navigation Satellite Systems) stations covering EU countries Estonia, Latvia, Lithuania, Poland, Czech Republic, Slovakia, Hungary, Bulgaria, Romania and East European countries Ukraine and Moldavia. EUPOS® network is a ground based GNSS augmentation system widely used for geodesy, land surveying, geophysics and navigation. It gives the opportunity for fast and accurate position determination never available before. It is an honorable task to use the EUPOS® system for research of the Struve triangulation former sites. Projects with Struve arc can popularize geodesy, geo-information and its meaning in nowadays GIS and GNSS systems. Struve Arc and its points is unique cooperation cross-border object which deserve special attention because of their natural beauty and historical value for mankind. GNSS in geodesy discovers a powerful tool for the verification and validation of the height values of geodetic leveling benchmarks established historically almost 200 years ago. The differential GNSS and RTK methods appear very useful to identify vertical displacement of landscape by means of

  8. To centralize or not to centralize?

    OpenAIRE

    Campbell, Andrew; Kunisch, Sven; Müller-Stewens, Günter

    2011-01-01

    The CEO's dilemma-were the gains of centralization worth the pain it could cause?-is a perennial one. Business leaders dating back at least to Alfred Sloan, who laid out GM's influential philosophy of decentralization in a series of memos during the 1920s, have recognized that badly judged centralization can stifle initiative, constrain the ability to tailor products and services locally, and burden business divisions with high costs and poor service.1 Insufficient centralization can deny bus...

  9. Maintenance evaluation for space station liquid systems

    Science.gov (United States)

    Flugel, Charles

    1987-01-01

    Many of the thermal and environmental control life support subsystems as well as other subsystems of the space station utilize various liquids and contain components which are either expendables or are life-limited in some way. Since the space station has a 20-year minimum orbital lifetime requirement, there will also be random failures occurring within the various liquid-containing subsystems. These factors as well as the planned space station build-up sequence require that maintenance concepts be developed prior to the design phase. This applies to the equipment which needs maintenance as well as the equipment which may be required at a maintenance work station within the space station. This paper presents several maintenance concepts for liquid-containing items and a flight experiment program which would allow for evaluation and improvement of these concepts so they can be incorporated in the space station designs at the outset of its design phase.

  10. UK 2009-2010 repeat station report

    Directory of Open Access Journals (Sweden)

    Thomas J.G. Shanahan

    2013-03-01

    Full Text Available The British Geological Survey is responsible for conducting the UK geomagnetic repeat station programme. Measurements made at the UK repeat station sites are used in conjunction with the three UK magnetic observatories: Hartland, Eskdalemuir and Lerwick, to produce a regional model of the local field each year. The UK network of repeat stations comprises 41 stations which are occupied at approximately 3-4 year intervals. Practices for conducting repeat station measurements continue to evolve as advances are made in survey instrumentation and as the usage of the data continues to change. Here, a summary of the 2009 and 2010 UK repeat station surveys is presented, highlighting the measurement process and techniques, density of network, reduction process and recent results.

  11. The computing and data infrastructure to interconnect EEE stations

    Science.gov (United States)

    Noferini, F.

    2016-07-01

    The Extreme Energy Event (EEE) experiment is devoted to the search of high energy cosmic rays through a network of telescopes installed in about 50 high schools distributed throughout the Italian territory. This project requires a peculiar data management infrastructure to collect data registered in stations very far from each other and to allow a coordinated analysis. Such an infrastructure is realized at INFN-CNAF, which operates a Cloud facility based on the OpenStack opensource Cloud framework and provides Infrastructure as a Service (IaaS) for its users. In 2014 EEE started to use it for collecting, monitoring and reconstructing the data acquired in all the EEE stations. For the synchronization between the stations and the INFN-CNAF infrastructure we used BitTorrent Sync, a free peer-to-peer software designed to optimize data syncronization between distributed nodes. All data folders are syncronized with the central repository in real time to allow an immediate reconstruction of the data and their publication in a monitoring webpage. We present the architecture and the functionalities of this data management system that provides a flexible environment for the specific needs of the EEE project.

  12. Sources of the wind power stations

    International Nuclear Information System (INIS)

    The paper deals with problems of the wind power stations. Describes the basic properties of wind energy. Shows and describes the different types of electrical machines used as a source of electricity in the wind power stations. Shows magnetic fields synchronous generator with salient poles and permanent magnets in the program FEMM. Describes methods for assessing of reversing the effects of the wind power stations on the distribution network. (Authors)

  13. Contemporary Tendencies in Radio Station Management

    OpenAIRE

    CIUREL Daniel-Liviu

    2013-01-01

    Radio station management has changed dramatically during the last few years. Operating in a stiff competition environment, radio stations need to focus on new business models, as they evolve from broadcasting to narrowcasting or nichecasting. Since a radio station operates simultaneously on two markets (the consumers and the advertisers) attention should be placed both on the radio production and the radio promotion, on-air as well as off-air. The Program Director (PD) is acting more and more...

  14. Station Program Note Pull Automation

    Science.gov (United States)

    Delgado, Ivan

    2016-01-01

    Upon commencement of my internship, I was in charge of maintaining the CoFR (Certificate of Flight Readiness) Tool. The tool acquires data from existing Excel workbooks on NASA's and Boeing's databases to create a new spreadsheet listing out all the potential safety concerns for upcoming flights and software transitions. Since the application was written in Visual Basic, I had to learn a new programming language and prepare to handle any malfunctions within the program. Shortly afterwards, I was given the assignment to automate the Station Program Note (SPN) Pull process. I developed an application, in Python, that generated a GUI (Graphical User Interface) that will be used by the International Space Station Safety & Mission Assurance team here at Johnson Space Center. The application will allow its users to download online files with the click of a button, import SPN's based on three different pulls, instantly manipulate and filter spreadsheets, and compare the three sources to determine which active SPN's (Station Program Notes) must be reviewed for any upcoming flights, missions, and/or software transitions. Initially, to perform the NASA SPN pull (one of three), I had created the program to allow the user to login to a secure webpage that stores data, input specific parameters, and retrieve the desired SPN's based on their inputs. However, to avoid any conflicts with sustainment, I altered it so that the user may login and download the NASA file independently. After the user has downloaded the file with the click of a button, I defined the program to check for any outdated or pre-existing files, for successful downloads, to acquire the spreadsheet, convert it from a text file to a comma separated file and finally into an Excel spreadsheet to be filtered and later scrutinized for specific SPN numbers. Once this file has been automatically manipulated to provide only the SPN numbers that are desired, they are stored in a global variable, shown on the GUI, and

  15. Space Station Freedom operations planning

    Science.gov (United States)

    Accola, Anne L.; Keith, Bryant

    1989-01-01

    The Space Station Freedom program is developing an operations planning structure which assigns responsibility for planning activities to three tiers of management. The strategic level develops the policy, goals and requirements for the program over a five-year horizon. Planning at the tactical level emphasizes program integration and planning for a two-year horizon. The tactical planning process, architecture, and products have been documented and discussed with the international partners. Tactical planning includes the assignment of user and system hardware as well as significant operational events to a time increment (the period of time from the arrival of one Shuttle to the manned base to the arrival of the next). Execution-level planning emphasizes implementation, and each organization produces detailed plans, by increment, that are specific to its function.

  16. Tracing Utopia in 'Utopia Station'

    DEFF Research Database (Denmark)

    Schwarzbart, Judith

    carries the same meaning and function in a contemporary culture. Utopia Station unfolded over a long period of time, starting with different gatherings in 2002, continuing with diverse ‘stations’ at the Venice Biennial (2003), Haus der Kunst in Munich (2004), and the World Social Forum in Porte Alegre......, modes of display, and the particular types of sociality potentially produced in exhibitions. The notion of utopia has moved back into fashion in recent years (with a readers such as Utopia (Documents in Contemporary Art) ed. Richard Noble (2009) and Utopia & Contemporary Art at Arken Museum of Modern...... Art (Publication due in 2012)). But it seems to differ noticeable from the ideologically driven concept(s) of the 20th century avant-garde. The paper will suggest that we in experiments with openness and structure, with an ambivalent engagement in popular culture and everyday life, and complex double...

  17. Forest climate stations in Bavaria

    International Nuclear Information System (INIS)

    The hydrology division of the Forstliche Versuchs- und Forschungsanstalt of Bavaria is the responsible operator of forest climate stations, with which it fulfills the following basic tasks: - securing of climate data relevant to growth and vitality which are representative of all major Bavarian forest areas, - measurement of soil humidity in region-typical forest sites as a parameter of forest site prospection and for the application of forest-hydrological models, - establishment of the deposition of pollutants and nutrients to forest ecosystems, - verification of the quality of soil leachates under forest sites, - preparing of budgets of substance cycles in forest ecosystems, - monitoring of biological processes in forest ecosystems as an instrument of precautionary environmental care. Furthermore, these basic data are prepared for use in ecosystemal research approachers in cooperation with other scientific disciplines. (orig.)

  18. Análisis descriptivo de la contabilidad de las obras del Puerto de la Luz y Las Palmas (Canarias, España) a través del estudio realizado por su director el ingeniero Juan de León y Castillo, siglos XIX y XX. (Accounting of the building works of the Port of la Luz y Las Palmas (Canary Islands, Spain) analyzed through the study of its director the engineer Juan de León y Castillo, 19th and 20th Centuries)

    OpenAIRE

    Castro Pérez, Candelaria; Calvo Cruz, Mercedes

    2010-01-01

    La construcción del Puerto de La Luz y Las Palmas, 1883-1903, fue adjudicada a la empresa inglesa Swanston and Company y dirigida por el ingeniero Juan de León y Castillo. El objetivo del presente trabajo es realizar una labor de reconstrucción, análisis e interpretación de las principales cuentas utilizadas para registrar las obras de construcción del citado puerto, el balance de las obras y el cálculo de las utilidades, todo ello a partir de los informes, cartas y demás documentos elaborado...

  19. Environmental assessment, proposed generating station for Darlington

    International Nuclear Information System (INIS)

    This document indicates the intention of Ontario Hydro to seek approval from the Provincial Government for its plan to construct and operate a 3400 MWe nuclear generating station at the Darlington site, west of Bowmanville. This preliminary proposal also contains the environmental assessment. The environmental section of this proposal describes and assesses the existing environment and the environmental influences which would occur due to the construction and operation of a nuclear generating station, consisting of four 850 MW units, at the Darlington site. This proposed station is similar to the Bruce GS A station presently under construction. (author)

  20. Live From Space Station Outreach Payload Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Live from Space Station? Outreach Payload (LFSSOP) is a technologically challenging, exciting opportunity for university students to conduct significant...

  1. Weather station with a web server

    OpenAIRE

    Repinc, Matej

    2013-01-01

    In this diploma thesis we present the process of making a cheap weather station using Arduino prototyping platform and its functionality. The weather station monitors current temperature, humidity of air and air pressure. The station has its own simple HTTP server that is used to relay current data in two different formats: JSON encoded data and simple HTML website. The weather station can also send data to a pre-defined server used for data collection. We implemented a web site where data an...

  2. Themis - A solar power station

    Science.gov (United States)

    Hillairet, J.

    The organization, goals, equipment, costs, and performance of the French Themis (Thermo-helio-electric-MW) project are outlined. The program was begun for both the domestic energy market and for export. The installation comprises a molten eutectic salt loop which receives heat from radiators situated in a central tower. The salt transfers the heat to water for steam generation of electricity. A storage tank holds enough molten salt to supply one day's reserve of power, 40 MWh. A field of heliostats directs the suns rays for an estimated 2400 hr/yr onto the central receiver aperture, while 11 additional parabolic concentrators provide sufficient heat to keep the salt reservoir at temperatures exceeding 200 C. In a test run of several months during the spring of 1982 the heliostats directed the sun's rays with an average efficiency of 75 percent, yielding 2.3 MW of power at a system efficiency of 20.5 percent in completely automatic operation.

  3. Simulations of the design basis accident at conditions of power increase and the o transient of MSIV at overpressure conditions of the Laguna Verde Power Station; Simulaciones del accidente base de diseno a condiciones de aumento de potencia y del transitorio de cierre de MSIV a condiciones de sobrepresion de la Central Laguna Verde

    Energy Technology Data Exchange (ETDEWEB)

    Araiza M, E.; Nunez C, A. [Comision Nacional de Seguridad Nuclear y Salvaguardias, 03000 Mexico D.F. (Mexico)

    2001-07-01

    This document presents the analysis of the simulation of the loss of coolant accident at uprate power conditions, that is 2027 MWt (105% of the current rated power of 1931MWt). This power was reached allowing an increase in the turbine steam flow rate without changing the steam dome pressure value at its rated conditions (1020 psiaJ. There are also presented the results of the simulation of the main steam isolation va/ve transient at overpressure conditions 1065 psia and 1067 MWt), for Laguna Verde Nuclear Power Station. Both simulations were performed with the best estimate computer code TRA C BF1. The results obtained in the loss of coolant accident show that the emergency core coolant systems can recover the water level in the core before fuel temperature increases excessively, and that the peak pressure reached in the drywell is always below its design pressure. Therefore it is concluded that the integrity of the containment is not challenged during a loss of coolant accident at uprate power conditions.The analysis of the main steam isolation valve transients at overpressure conditions, and the analysis of the particular cases of the failure of one to six safety relief valves to open, show that the vessel peak pressures are below the design pressure and have no significant effect on vessel integrity. (Author)

  4. Calculation of the pipes failure probability of the Rcic system of a nuclear power station by means of software WinPRAISE 07; Calculo de la probabilidad de falla de tuberias del sistema RCIC de una central nuclear mediante el software WinPRAISE 07

    Energy Technology Data Exchange (ETDEWEB)

    Jasso G, J.; Diaz S, A.; Mendoza G, G.; Sainz M, E. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Garcia de la C, F. M., E-mail: angeles.diaz@inin.gob.mx [Comision Federal de Electricidad, Central Nucleoelectrica Laguna Verde, Km 44.5 Carretera Cardel-Nautla, 91476 Laguna Verde, Alto Lucero, Veracruz (Mexico)

    2014-10-15

    The growth and the cracks propagation by fatigue are a typical degradation mechanism that is presented in the nuclear industry as in the conventional industry; the unstable propagation of a crack can cause the catastrophic failure of a metallic component even with high ductility; for this reason, activities of programmed maintenance have been established in the industry using inspection and visual techniques and/or ultrasound with an established periodicity allowing to follow up to these growths, controlling the undesirable effects; however, these activities increase the operation costs; and in the peculiar case of the nuclear industry, they increase the radiation exposure to the participant personnel. The use of mathematical processes that integrate concepts of uncertainty, material properties and the probability associated to the inspection results, has been constituted as a powerful tool of evaluation of the component reliability, reducing costs and exposure levels. In this work the evaluation of the failure probability by cracks growth preexisting by fatigue is presented, in pipes of a Reactor Core Isolation Cooling system (Rcic) in a nuclear power station. The software WinPRAISE 07 (Piping Reliability Analysis Including Seismic Events) was used supported in the probabilistic fracture mechanics principles. The obtained values of failure probability evidenced a good behavior of the analyzed pipes with a maximum order of 1.0 E-6, therefore is concluded that the performance of the lines of these pipes is reliable even extrapolating the calculations at 10, 20, 30 and 40 years of service. (Author)

  5. East Baton Rouge Fire Stations, UTM15 NAD83, LAGIC (2002) [ebr_fire_stations

    Data.gov (United States)

    Louisiana Geographic Information Center — This dataset consists of twenty-nine (29) geocoded points representing fire stations in East Baton Rouge parish, Louisiana. Thirty (30) fire station, disctrict, and...

  6. Microearthquakes at Valles Caldera, New Mexico: Improved Detection and Location with Two Additional Caldera Stations

    Science.gov (United States)

    Roberts, P. M.; House, L. S.; Ten Cate, J. A.

    2015-12-01

    The Los Alamos Seismic Network (LASN) has operated for 43 years, providing data to locate more than 2,500 earthquakes in north-central New Mexico. Roughly 1-2 earthquakes are detected and located per month within about 150 km of Los Alamos, a total of over 900 from 1973 to present. LASN's primary purpose is to monitor seismicity close to the Los Alamos National Laboratory (LANL) for seismic hazards; monitoring seismicity associated with the nearby Valles Caldera is secondary. Until 2010 the network was focused on monitoring seismic hazards and comprised only 7 stations, all near LANL or in the nearby Jemez Mountains. Just one station—PER, installed in 1998—was close enough to Valles Caldera to be able to detect microearthquakes located in or near the caldera. An initial study of the data from station PER between 1998 and 2002 identified and located 13 events with magnitudes less than 0.5 using the single-station hodogram technique. Those events were all located south of the caldera within a few kilometers of PER. Recently, two new digital broadband stations were installed inside the caldera, one on a northeastern ring-fracture dome, station CDAB, and the other on a northwestern dome, station SAMT. Also, station PER was upgraded with digital broadband instrumentation. Thus, LASN now can detect and record microearthquakes as small as magnitude -1.5 near the caldera, and they can be located using multiple arrival times. Several recent events located near station SAMT on the caldera's ring fracture are the first that have been seen in that area. Additional events were recorded (by all three stations) and located in the area south of the caldera where the earlier hodogram-only events were located. These new multi-station event recordings allow a more quantitative assessment of the uncertainties in the initial single-station hodogram locations. Each event is located using multiple arrival times as well as the hodogram method at as many as three stations. Thus

  7. Hydrogen Station Cost Estimates: Comparing Hydrogen Station Cost Calculator Results with other Recent Estimates

    Energy Technology Data Exchange (ETDEWEB)

    Melaina, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Penev, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-09-01

    This report compares hydrogen station cost estimates conveyed by expert stakeholders through the Hydrogen Station Cost Calculation (HSCC) to a select number of other cost estimates. These other cost estimates include projections based upon cost models and costs associated with recently funded stations.

  8. Estimating Pedestrian flows at train stations using the Station Transfer Model

    NARCIS (Netherlands)

    Van den Heuvel, J.P.A.; Dekkers, K.; De Vos, S.

    2012-01-01

    Train stations play a vital role in the door to door travel experience of train passengers. From the passengers’ value of time perspective, the station is the weakest link in total time value of the journey. Within the station the transfer function – moving between the various transport modes and wa

  9. Catalog of seismograph stations operated in support of the ERDA Nevada Operations Office, January 1964 thru June 1976

    Science.gov (United States)

    Navarro, R.; Wuollet, Geraldine M.; Bradley, B.R.

    1977-01-01

    The seismograph stations listed in this catalog were established over the period January 1964 through June 1976 in support of the Energy Research and Development Administration, Nevada (ERDA/NV) underground weapons testing program at the Nevada Test Site (NTS), central Nevada, and Amchitka, Alaska. For station listings before 1964 see Coast and Geodetic Survey publication, "Seismic Data Summary Nuclear Detonation Program 1961 through 1963", by W. V. Mickey and T. R. Shugart, January 1964. Coordinates of stations instrumented for ERDA's Industrial Application Division (IAD, Plowshare) events are published in separate reports (Appendix A, page 66). In addition to the stations for monitoring the testing program, other stations established for specific seismicity studies, such as the Aleutian Seismicity Network, are also listed.

  10. Plans for Learning Stations. Tractor Mechanics.

    Science.gov (United States)

    Clemson Univ., SC. Vocational Education Media Center.

    This shop guide gives graphic illustration of twenty-eight learning stations in a tractor mechanics shop, at each of which a specific learning activity occurs. The authors suggest that each station (most of them constructed of plywood or sheet metal and angle iron) be self-contained, having its own appropriate tools, supplies, parts, and set of…

  11. 49 CFR 236.814 - Station, control.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Station, control. 236.814 Section 236.814..., MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.814 Station, control. The place where the control machine of a traffic control system is located....

  12. The white SR spectrum experimental station

    Energy Technology Data Exchange (ETDEWEB)

    Ancharov, A.I. E-mail: a.i.ancharov@inp.nsk.su; Evdokov, O.V.; Tolochko, B.P.; Sukhorukov, A.V.; Baru, S.E.; Savinov, G.A.; Kosov, A.V.; Sheromov, M.A.; Sikka, S.K.; Momin, S.N

    2000-06-21

    A new experimental station for working with white synchrotron radiation is described. Radiation from the bending magnet of the VEPP-4 storage ring is used. The station is destined for study of structures at high pressure by energy-dispersive and Laue diffraction methods.

  13. The white SR spectrum experimental station

    CERN Document Server

    Ancharov, A I; Tolochko, B P; Sukhorukov, A V; Baru, S E; Savinov, G A; Kosov, A V; Sheromov, M A; Sikka, S K; Momin, S N

    2000-01-01

    A new experimental station for working with white synchrotron radiation is described. Radiation from the bending magnet of the VEPP-4 storage ring is used. The station is destined for study of structures at high pressure by energy-dispersive and Laue diffraction methods.

  14. IVA robotics for Space Station Freedom

    Science.gov (United States)

    Jones, Sharon Monica

    1992-01-01

    The objective is to increase the scientific productivity of Space Station Freedom (Spacelab) during the man-tended phase and beyond. The topics are presented in viewgraph form and include: Space Station Freedom (SSF) background, man-tended phase, intra-vehicular activity (IVA) robotics, protein crystal growth experiment, thermal enclosure system equipment, and candidate mockup demonstrations.

  15. Modeling passenger flows in public transport stations

    Directory of Open Access Journals (Sweden)

    Cem Kırlangıçoğlu

    2015-06-01

    Full Text Available There are many architectural design parameters for public transport stations which include urban and station level studies. Each station must be designed in accordance with the basic passenger requirements such as accessibility, safety, comfort, satisfaction and etc. Circulation spaces must be formed and sized to meet the minimum movement needs of passengers. For an underground station; main entrance region, position of gates, location and number of turnstiles, escalators, stairs, ramps, passageways, intermediate concourses and platforms must be arranged to minimize walking distances and to prevent congestion. In this study, circulation of passengers is simulated in a quantitatively verifiable manner, taking into account how individuals interact with each other and with the physical obstacles in their environment in a metro station. Virtual experiments are performed to see the continuity and density of pedestrian flow at different levels of Haram Area East Metro Station of the first metro line of Madinah Al-Munawwarah, Saudi Arabia. According to the predictions, more than 40.000 passengers are expected to use this station in one hour after a Friday prayer during Ramadan period in the year of 2040. That means a critically high travel demand and it is really significant to design the most convenient underground station for these passengers to fulfil the necessary requirements.

  16. The Sewer Research Station in Frejlev

    DEFF Research Database (Denmark)

    Schaarup-Jensen, Kjeld; Hvitved-Jacobsen, T.

    This report for the 2000 activities at the sewer research station in Frejlev. Only few - if any - sewer monitoring stations like the one in Frejlev exist. Without no doubt the field data produced - especially the time series - in the course of time will serve as a unique basis for projects dealing...

  17. The Sewer Research Station in Frejlev

    DEFF Research Database (Denmark)

    Hvitved-Jacobsen, Thorkild; Schaarup-Jensen, Kjeld

    2003-01-01

    This report for the 1999 activities at the sewer research station in Frejlev. Only few - if any - sewer monitoring stations like the one in Frejlev exist. Without no doubt the field data produced - especially the time series - in the course of time will serve as a unigue basis for projects dealing...

  18. GSFC contamination monitors for Space Station

    Science.gov (United States)

    Carosso, P. A.; Tveekrem, J. L.; Coopersmith, J. D.

    1988-01-01

    This paper describes the Work Package 3 activities in the area of neutral contamination monitoring for the Space Station. Goddard Space Flight Center's responsibilities include the development of the Attached Payload Accommodations Equipment (APAE), the Polar Orbiting Platform (POP), and the Flight Telerobotic Servicer (FTS). GSFC will also develop the Customer Servicing Facility (CSF) in Phase 2 of the Space Station.

  19. Present trends in HVDC converter station design

    Energy Technology Data Exchange (ETDEWEB)

    Carlsson, Lennart; Asplund, Gunnar; Bjorklund, Hans; Flisberg, Gunnar [ABB Power Systems AB, Ludvika (Sweden)

    1994-12-31

    HVDC converter station technology has developed rapidly to satisfy increasing requirements during past 10 - 15 years, but there has not been any dramatic changes since thyristor valves were introduced in the mid 70s. This paper describes some recent and expected future developments, that will substantiality change and simplify future converter stations. (author) 4 refs., 7 figs.

  20. Background noise spectra of global seismic stations

    Energy Technology Data Exchange (ETDEWEB)

    Wada, M.M.; Claassen, J.P.

    1996-08-01

    Over an extended period of time station noise spectra were collected from various sources for use in estimating the detection and location performance of global networks of seismic stations. As the database of noise spectra enlarged and duplicate entries became available, an effort was mounted to more carefully select station noise spectra while discarding others. This report discusses the methodology and criteria by which the noise spectra were selected. It also identifies and illustrates the station noise spectra which survived the selection process and which currently contribute to the modeling efforts. The resulting catalog of noise statistics not only benefits those who model network performance but also those who wish to select stations on the basis of their noise level as may occur in designing networks or in selecting seismological data for analysis on the basis of station noise level. In view of the various ways by which station noise were estimated by the different contributors, it is advisable that future efforts which predict network performance have available station noise data and spectral estimation methods which are compatible with the statistics underlying seismic noise. This appropriately requires (1) averaging noise over seasonal and/or diurnal cycles, (2) averaging noise over time intervals comparable to those employed by actual detectors, and (3) using logarithmic measures of the noise.

  1. Solar radiation observation stations updated to 1979

    Energy Technology Data Exchange (ETDEWEB)

    Carter, E.A.; Cristina, J.R.; Williams, B.B.

    1979-04-01

    The type of sensing and recording equipment for 420 stations in the US are listed alphabetically by states. The stations are divided according to whether or not they are in the basic National Weather Service, NOAA, network. Reports of summarized solar radiation data are listed in an appendix. (MHR)

  2. Estudio del estado de los Puentes en la Carretera Central en su travesía por la provincia de Matanzas.

    Directory of Open Access Journals (Sweden)

    Yordanis Cuba Cepero

    2012-01-01

    Full Text Available La Carretera Central es considerada una de las Siete Maravillas de la Ingeniería Civil en Cuba, según selección realizada en 1997 por la Unión Nacional de Arquitectos e Ingenieros de la Construcción de Cuba-UNAICC. Con el paso de los años, estudiosos de esa obra refuerzan su criterio de que fue el primer megaproyecto realizado en Cuba, por la complejidad de su ejecución y porque atravesó la isla por su centro. Considerando que uno de los territorios atravesados por esta importante vía, es la provincia de Matanzas, y que desde su puesta en explotación, a finales de la década del 20´ del siglo pasado, han sido escasas las acciones de conservación (mantenimiento, rehabilitación y adaptación, es que se decide actualizar el estado de los puentes localizados en esta importante vía y a su vez proponer acciones de carácter general para la gestión de su rehabilitación.

  3. Simulators of nuclear power stations

    International Nuclear Information System (INIS)

    The report deals with the simulators of nuclear power stations used for the training of operators and for the analysis of operations. It reviews the development of analogical, hybrid and digital simulators up to the present, indicating the impact resulting from the TMI-2 accident. It indicates, the components of simulators and the present accepted terminology for a classification of the various types of simulators. It reviews the present state of the art of the technology: how a basic mathematical model of a nuclear power system is worked out and what are the technical problems associated with more accurate models. Examples of elaborate models are given: for a PWR pressurizer, for an AGR steam generator. It also discusses certain problems of hardware technology. Characteristics of present replica simulators are given with certain details: simulated transient evolutions and malfunctions, accuracy of simulation. The work concerning the assessment of the validity of certain simulators is reported. A list of simulator manufacturers and a survey of the principal simulators in operation in the countries of the European Community, in the United States, and in certain other countries are presented. Problem associated with the use of simulators as training facilities, and their use as operational devices are discussed. Studies and research in progress for the expected future development of simulators are reviewed

  4. NIDDK Central Repository

    Data.gov (United States)

    U.S. Department of Health & Human Services — The NIDDK Central Repository stores biosamples, genetic and other data collected in designated NIDDK-funded clinical studies. The purpose of the NIDDK Central...

  5. The new 2nd-generation laser station at Santiago de Cuba

    Science.gov (United States)

    Masevich, A. G.; Chepurnov, B. D.; Fundora, M.; del Pino, J.; Kautzleben, H.

    The new laser-radar station at Santiago de Cuba was equipped in cooperation between the Academies of Sciences of the USSR, Cuba and the G.D.R. The system is based on a modified satellite-tracking camera (SBG). Its basic concept and the technical performance are similar to the laser-radar station of the Central Institute for Physics of the Earth, Potsdam. During a first 6-weeks-observation campaign (Dec. 1985 - Jan. 1986), 70 satellite passes (including 40 passes of the geodynamical satellite LAGEOS) were obtained.

  6. Hinkley Point 'C' power station public inquiry: outline statement of case

    International Nuclear Information System (INIS)

    This outline statement relates to the public inquiry to be held into the planning application by the Central Electricity Generating Board (CEGB) to construct a 1200 MW Pressurized Water Reactor (PWR) power station at Hinkley Point (Hinkley Point ''C'') in the United Kingdom, adjacent to an existing nuclear power station. The inquiry will consider economic, safety, environmental and planning matters relevant to the application and the implications for agriculture and local amenities of the re-aligning of two 400 kV overhead transmission lines. The outline statement contains submissions on: policy contest and approach; the requirement for Hinkley Point ''C''; design and safety; local issues. (UK)

  7. Central and peripheral demyelination

    OpenAIRE

    Man Mohan Mehndiratta; Natasha Singh Gulati

    2014-01-01

    Several conditions cause damage to the inherently normal myelin of central nervous system, perepheral nervous system or both central and perepheral nervous system and hence termed as central demyelinating diseases, perepheral demyelinating diseases and combined central and perepheral demyelinating diseases respectively. Here we analysed and foccused on the etiology, prevalance, incidence and age of these demyelinating disorders. Clinical attention and various diagnostic tests are needed to ad...

  8. 14 CFR 145.207 - Repair station manual.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Repair station manual. 145.207 Section 145...) SCHOOLS AND OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.207 Repair station manual. (a) A certificated repair station must prepare and follow a repair station manual acceptable to...

  9. 47 CFR 97.211 - Space telecommand station.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Space telecommand station. 97.211 Section 97... AMATEUR RADIO SERVICE Special Operations § 97.211 Space telecommand station. (a) Any amateur station designated by the licensee of a space station is eligible to transmit as a telecommand station for that...

  10. Space Station thermal storage/refrigeration system research and development

    Science.gov (United States)

    Dean, W. G.; Karu, Z. S.

    1993-01-01

    Space Station thermal loading conditions represent an order of magnitude increase over current and previous spacecraft such as Skylab, Apollo, Pegasus III, Lunar Rover Vehicle, and Lockheed TRIDENT missiles. Thermal storage units (TSU's) were successfully used on these as well as many applications for ground based solar energy storage applications. It is desirable to store thermal energy during peak loading conditions as an alternative to providing increased radiator surface area which adds to the weight of the system. Basically, TSU's store heat by melting a phase change material (PCM) such as a paraffin. The physical property data for the PCM's used in the design of these TSU's is well defined in the literature. Design techniques are generally well established for the TSU's. However, the Space Station provides a new challenge in the application of these data and techniques because of three factors: the large size of the TSU required, the integration of the TSU for the Space Station thermal management concept with its diverse opportunities for storage application, and the TSU's interface with a two-phase (liquid/vapor) thermal bus/central heat rejection system. The objective in the thermal storage research and development task was to design, fabricate, and test a demonstration unit. One test article was to be a passive thermal storage unit capable of storing frozen food at -20 F for a minimum of 90 days. A second unit was to be capable of storing frozen biological samples at -94 F, again for a minimum of 90 days. The articles developed were compatible with shuttle mission conditions, including safety and handling by astronauts. Further, storage rack concepts were presented so that these units can be integrated into Space Station logistics module storage racks. The extreme sensitivity of spacecraft radiator systems design-to-heat rejection temperature requirements is well known. A large radiator area penalty is incurred if low temperatures are accommodated via a

  11. Proposal for a remotely manned space station

    Science.gov (United States)

    Minsky, Marvin

    1990-01-01

    The United States is in trouble in space. The costs of the proposed Space Station Freedom have grown beyond reach, and the present design is obsolete. The trouble has come from imagining that there are only two alternatives: manned vs. unmanned. Both choices have led us into designs that do not appear to be practical. On one side, the United States simply does not possess the robotic technology needed to operate or assemble a sophisticated unmanned space station. On the other side, the manned designs that are now under way seem far too costly and dangerous, with all of its thousands of extravehicular activity (EVA) hours. More would be accomplished at far less cost by proceeding in a different way. The design of a space station made of modular, Erector Set-like parts is proposed which is to be assembled using earth-based remotely-controlled binary-tree telerobots. Earth-based workers could be trained to build the station in space using simulators. A small preassembled spacecraft would be launched with a few telerobots, and then, telerobots could be ferried into orbit along with stocks of additional parts. Trained terrestrial workers would remotely assemble a larger station, and materials for additional power and life support systems could be launched. Finally, human scientists and explorers could be sent to the space station. Other aspects of such a space station program are discussed.

  12. Local earthquake activity around Syowa Station, Antarctica

    OpenAIRE

    Kaminuma,Katsutada/Kanao,Masaki/Kubo,Atsuki

    1998-01-01

    The Japanese Antarctic Station, Syowa (69°S, 39°E), is located at the edge of the east Antarctic shield. Seismic observations at Syowa Station were started in 1959. Phase readings of earthquakes have been published by National Institute of Polar Research once a year since 1968, as one of the Data Report Series. Nine local earthquakes were detected empirically on short-period seismograms at Syowa Station in 1990-1996 on the basis of long term records of many different types of events. The seis...

  13. 77 FR 41203 - NASA International Space Station Advisory Committee; Meeting

    Science.gov (United States)

    2012-07-12

    ... SPACE ADMINISTRATION NASA International Space Station Advisory Committee; Meeting AGENCY: National... Administration announces an open meeting of the NASA International Space Station (ISS) Advisory Committee. The... aboard the International Space Station, including transportation, and crew rotation; and, to assess...

  14. 77 FR 2765 - NASA International Space Station Advisory Committee; Meeting

    Science.gov (United States)

    2012-01-19

    ... SPACE ADMINISTRATION NASA International Space Station Advisory Committee; Meeting AGENCY: National... Administration announces an open meeting of the NASA International Space Station (ISS) Advisory Committee. The... aboard the International Space Station, including transportation, and crew rotation; and, to assess...

  15. 77 FR 66082 - NASA International Space Station Advisory Committee; Meeting

    Science.gov (United States)

    2012-11-01

    ... SPACE ADMINISTRATION NASA International Space Station Advisory Committee; Meeting AGENCY: National... Administration announces an open meeting of the NASA International Space Station (ISS) Advisory Committee. The... aboard the International Space Station, including transportation, and crew rotation; and, to assess...

  16. 75 FR 51852 - NASA International Space Station Advisory Committee; Meeting

    Science.gov (United States)

    2010-08-23

    ... SPACE ADMINISTRATION NASA International Space Station Advisory Committee; Meeting AGENCY: National... Administration announces an open meeting of the NASA International Space Station Advisory Committee. The purpose... the International Space Station, including transportation, crew rotation, training, and...

  17. Flow field in the inner shelf along the central east coast of India during the southwest monsoon season

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, T.V.N.

    Current measurements collected along the inner shelf off the central east coast of India at seven stations during August-September 1988 are discussed. Data indicate a southerly flowing alongshore current, which occupies the whole of the water column...

  18. U.S. Navy flyover hosted by the Virginia Tech Corps of Cadets for Central Michigan game

    OpenAIRE

    Cox, Carrie

    2010-01-01

    Carrier Airborne Early Warning Squadron One Two Zero, VAW-120, stationed at Naval Station Norfolk, Va., will conduct a military flyover with an E-2C Hawkeye and a C-2A Greyhound during the National Anthem prior to the Virginia Tech versus Central Michigan University football game on Saturday, Oct. 9.

  19. NPS Focus Digital Library and Research Station

    Data.gov (United States)

    National Park Service, Department of the Interior — Scope: National. NPS Focus Digital Library and Research Station information system manages images and archives of images as well as documents described by linked...

  20. [Station Safety Plan: Louisa National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Louisa National Wildlife Refuge Safety plan discusses policies for the safety of the station employees, volunteers and public. This plan seeks to identify and...

  1. 78 FR 50340 - Travelers' Information Stations

    Science.gov (United States)

    2013-08-19

    ... normal communication facilities are disrupted as a result of hurricane, flood, earthquake or similar... From the Federal Register Online via the Government Publishing Office FEDERAL COMMUNICATIONS COMMISSION 47 CFR Part 90 Travelers' Information Stations AGENCY: Federal Communications Commission....

  2. CDMP COOP Station History Indexing Guidelines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Single 66-page document entitled 'Station history COOP Rework via WSSRD and stragglers NC4 & NC3: Keying Rules,' dated December 12, 2003. Contractors with...

  3. Non-Coop Station History Forms Digest

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Single 71-page document entitled 'Station history non-COOP Keying Rules & Forms Digest,' dated December 12, 2003. Contractors with NCDC Climate Database...

  4. Outdoor Field Experience with Autonomous Stations

    CERN Document Server

    Lopes, L; Blanco, A; Carolino, N; Cerda, M A; Conceicao, R; Cunha, O; Ferreira, M; Fonte, P; Luz, R; Mendes, L; Pereira, A; Pimenta, M; Sarmento, R; Tome, B

    2016-01-01

    In the last two decades Resistive Plate Chambers were employed in the Cosmic Ray Experiments COVER-PLASTEX and ARGO/YBJ. In both experiments the detectors were housed indoors, likely owing to gas distribution requirements and the need to control environment variables that directly affect RPCs operational stability. But in experiments where Extended Air Shower (EAS) sampling is necessary, large area arrays composed by dispersed stations are deployed, rendering this kind of approach impossible. In this situation, it would be mandatory to have detectors that could be deployed in small standalone stations, with very rare opportunities for maintenance, and with good resilience to environmental conditions. Aiming to meet these requirements, we started some years ago the development of RPCs for Autonomous Stations. The results from indoor tests and measurements were very promising, both concerning performance and stability under very low gas flow rate, which is the main requirement for Autonomous Stations. In this w...

  5. Satellite laser station Helwan status 1992

    Science.gov (United States)

    Cech, M.; Hamal, Karel; Jelinkova, Helena; Novotny, Antonin; Prochazka, Ivan; Baghos, B. B.; Helali, Y.; Tawadros, M. J.

    1993-01-01

    The Satellite Laser Station Helwan has been operated jointly by the National Research Institute of Astronomy and Geophysics in Helwan, Egypt and the Czech Technical University in Prague, Czechslovakia. The station components have been carefully tuned to increase the systems overall stability and reliability critical for the remote location. The mount correction model based on the Gaussian smoothing has been implemented to simplify the blind satellite acquisition and tracking. The on-site normal points generation algorithm has been implemented, the station has been connected to the international information network. The ERS-1 satellite has been included into the tracking schedule. The station range capability has been verified by experimental Etalon 1 ranging by April 1992. The ranging precision of 2-3 centimeters is obtained when ranging to ERS-1, Starlette, and Lageos satellites.

  6. Space Station concept development group studies

    Science.gov (United States)

    Powell, L. E.

    1984-01-01

    The NASA study activities in preparation for a Space Station began in the early 1970's. The early studies included many in-house NASA and contracted studies. A group of representatives from all the NASA Centers, titled the Space Station Concept Development Group (CDG) was involved in the studies which led to the initiation of the Space Station Program. The CDG studies were performed over a period of approximately one year and consisted of four phases. The initial phase had the objective to determine the functions required of the station as opposed to a configuration. The activities of the second phase were primarily concerned with a sizing of the facilities required for payloads and the resources necessary to support these mission payloads. The third phase of studies was designed to develop a philosophical approach to a number of areas related to autonomy, maintainability, operations and logistics, and verification. The fourth phase of the study was to be concerned with configuration assessment activities.

  7. DMA Reference Base Station Network Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data (15,904 records documenting 9,090 worldwide gravity base stations) were gathered by various governmental organizations (and academia) using a variety of...

  8. Accommodating life sciences on the Space Station

    Science.gov (United States)

    Arno, Roger D.

    1987-01-01

    The NASA Ames Research Center Biological Research Project (BRP) is responsible for identifying and accommodating high priority life science activities, utilizing nonhuman specimens, on the Space Station and is charged to bridge the gap between the science community and the Space Station Program. This paper discusses the approaches taken by the BRP in accomodating these research objectives to constraints imposed by the Space Station System, while maintaining a user-friendly environment. Consideration is given to the particular research disciplines which are given priority, the science objectives in each of these disciplines, the functions and activities required by these objectives, the research equipment, and the equipment suits. Life sciences programs planned by the Space Station participating partners (USA, Europe, Japan, and Canada) are compared.

  9. The Future Deep Underwater Space Station

    Directory of Open Access Journals (Sweden)

    Jianjun Yao

    2013-08-01

    Full Text Available The purpose of the study is to provide an idea of developing an underwater space station. Though the ocean covers about 71% of the surface of the Earth and holds tremendous amount of resources, it is still an unknown field for human beings. With the depletion of natural resources on the land, there is an urgent need to explore and exploit the ocean, but this process is constrained by the ocean engineering equipment and technology. The study proposed a sketch of a deep sea space station, which is similar to the International space station. The station can applied to observe the ocean environment, generate power from the ocean energy, manage to mine resources, control underwater factories and underwater vehicles, be habitable for staff, making another space for human.

  10. Hydropower development in the Central Himalayas

    Energy Technology Data Exchange (ETDEWEB)

    Singh, N. (Irrigation Design Organization, Rourkee (India))

    1992-10-01

    The Central Himalayas comprise eight hill districts of the State of Uttar Pradesh, India. These mountains are the source of the Ganga and its main tributaries: the Yamuna, Ramganga and Sarda rivers. The identified hydro potential of the Ganga, Yamuna, Sarda and their tributaries in the Central Himalayas is about 30 000 MW, with an annual average energy potential of 100 TWh. The projects which have been completed so far have only developed 3.2 per cent of this potential. The projects which are now under construction will exploit another 10.4 per cent of the potential. Thus, the untapped potential is as much as 85 per cent of the total. The minor tributaries also offer vast potential for mini and micro hydroelectric stations. In most conservative estimates, this potential is about 2000 MW. (author).

  11. Precipitation in the Central Mediterranean during the last century

    Science.gov (United States)

    Maheras, P.; Balafoutis, Ch.; Vafiadis, M.

    1992-09-01

    Monthly precipitation data from 10 stations (Patras, Corfu, Hvar, Trieste, Venice, Florence, Rome, Naples, Catania and Malta) in the Central Mediterranean area are used for a period of 95 years (1894 1988). The homogeneity of these precipitation time series is tested and their statistical characteristics are analysed. An abrupt climatic change is found at Naples and Rome. The application of Principal Component Analysis (PCA) has yielded three groups of stations where the precipitation data indicate similar fluctuations. Group A includes the stations situated along the coasts of the Ionian and Adriatic seas and the station Naples, while Group B includes the Northern Italian stations and Group C includes the stations at Catania and Malta. In all three groups maximum precipitation was observed during the 1930s. The periodicities of the scores of the significant components have been studied by spectral analysis and significant periodicities of 13.6, 3.5 and 2.2 years were found. Finally, a discussion of the relationships between these precipitation fluctuations and circulation types over the Mediterranean is presented.

  12. Hinkley Point 'C' power station public inquiry: proof of evidence on landscape and architecture

    International Nuclear Information System (INIS)

    A public inquiry has been set up to examine the planning application made by the Central Electricity Generating Board (CEGB) for the construction of a 1200 MW Pressurized Water Reactor power station at Hinkley Point (Hinkley Point ''C'') in the United Kingdom, adjacent to an existing nuclear power station. The CEGB evidence to the Inquiry includes an assessment of the effect, in visual terms, that the additional power station will have on the surrounding landscape and landscaping proposals for the proposed construction, including reinstatement of land used for temporary works. In addition, the architectural objectives for the new buildings are presented, primarily aiming at the best possible appearance from relatively short distances and medium and long range. (UK)

  13. Selective Nitrate Recognition by a Halogen-Bonding Four-Station [3]Rotaxane Molecular Shuttle.

    Science.gov (United States)

    Barendt, Timothy A; Docker, Andrew; Marques, Igor; Félix, Vítor; Beer, Paul D

    2016-09-01

    The synthesis of the first halogen bonding [3]rotaxane host system containing a bis-iodo triazolium-bis-naphthalene diimide four station axle component is reported. Proton NMR anion binding titration experiments revealed the halogen bonding rotaxane is selective for nitrate over the more basic acetate, hydrogen carbonate and dihydrogen phosphate oxoanions and chloride, and exhibits enhanced recognition of anions relative to a hydrogen bonding analogue. This elaborate interlocked anion receptor functions via a novel dynamic pincer mechanism where upon nitrate anion binding, both macrocycles shuttle from the naphthalene diimide stations at the periphery of the axle to the central halogen bonding iodo-triazolium station anion recognition sites to form a unique 1:1 stoichiometric nitrate anion-rotaxane sandwich complex. Molecular dynamics simulations carried out on the nitrate and chloride halogen bonding [3]rotaxane complexes corroborate the (1) H NMR anion binding results. PMID:27436297

  14. Check valve slam analysis in pumping station

    Science.gov (United States)

    Himr, D.; Habán, V.; Dokoupil, P.

    2016-03-01

    Pumping station supplies water for technological process. The check valve in the station was replaced with a new one. The regular test of black out discovered the high pressure pulsations accompanied with noticeable pipeline movement of discharge pipe. It was caused by late check valve closing, probably, when the back flow reached the highest possible velocity. This statement was supported with analysis of results of pressure measurement near the check valve and with a numerical simulation of the flow in the pipeline system.

  15. Check valve slam analysis in pumping station

    OpenAIRE

    Himr D.; Habán V.; Dokoupil P.

    2016-01-01

    Pumping station supplies water for technological process. The check valve in the station was replaced with a new one. The regular test of black out discovered the high pressure pulsations accompanied with noticeable pipeline movement of discharge pipe. It was caused by late check valve closing, probably, when the back flow reached the highest possible velocity. This statement was supported with analysis of results of pressure measurement near the check valve and with a numerical simulation of...

  16. Work Station For Inverting Solar Cells

    Science.gov (United States)

    Feder, H.; Frasch, W.

    1982-01-01

    Final work station along walking-beam conveyor of solar-array assembly line turns each pretabbed solar cell over, depositing it back-side-up onto landing pad, which centers cell without engaging collector surface. Solar cell arrives at inverting work station collector-side-up with two interconnect tabs attached to collector side. Cells are inverted so that second soldering operation takes place in plain view of operator. Inversion protects collector from damage when handled at later stages of assembly.

  17. Connecting strangers at a train station

    DEFF Research Database (Denmark)

    Serafin, Stefania; Böttcher, Niels; Pellarin, Lars;

    2005-01-01

    In this paper we describe a virtual instrument or a performance space, placed at Høje Tåstrup train station in Denmark, which is meant to establish communicative connections between strangers, by letting users of the system create soundscapes together across the rails. We discuss mapping...... to the development of an interactive installation which takes place in Hoje Taastrup train station in Denmark....

  18. [Medicine at a polar station in Antarctica].

    Science.gov (United States)

    Brat, Kristián; Zvěřina, Ondřej

    2015-12-01

    The paper describes specific aspects of work of a scientific expedition doctor and the stay and life at a polar research station in Antarctica. Apart from the outline of everyday problems, the first named author also learns about the history of medical practitioners working in Antarctica, writes about the results of the biomedical research activities conducted in the period of 2011-2014 and briefly describes the daily routine at a scientific polar station in Antarctica.

  19. Diagnostic Analysis on a Regional Rainstorm Weather in North-central Henan Province

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    [Objective] The research aimed to analyze a regional rainstorm weather process in north-central Henan Province. [Method] Based on the conventional meteorological observation data and the rainfall data of Henan Meteorological Station, the diagnostic analysis of atmospheric thermodynamics and dynamics on a rainstorm weather process in north-central Henan Province on July 19, 2010 was carried out. The characteristics of physical quantity field and the evolution of weather situation in north-central Henan Provi...

  20. Reevaluation of air surveillance station siting

    Energy Technology Data Exchange (ETDEWEB)

    Abbott, K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Jannik, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-07-06

    DOE Technical Standard HDBK-1216-2015 (DOE 2015) recommends evaluating air-monitoring station placement using the analytical method developed by Waite (Waite, 1973). The technique utilizes wind rose and population distribution data in order to determine a weighting factor for each directional sector surrounding a nuclear facility. Based on the available resources (number of stations) and a scaling factor, this weighting factor is used to determine the number of stations recommended to be placed in each sector considered. An assessment utilizing this method was performed in 2003 to evaluate the effectiveness of the existing SRS air-monitoring program. The resulting recommended distribution of air-monitoring stations was then compared to that of the existing site perimeter surveillance program (Fledderman 2003). The assessment demonstrated that the distribution of air-monitoring stations at the time generally agreed with the results obtained using the Waite method; however at the time new stations were established in Barnwell and in Williston in order to meet requirements of DOE guidance document EH-0173T.

  1. Alkaline RFC Space Station prototype - 'Next step Space Station'. [Regenerative Fuel Cells

    Science.gov (United States)

    Hackler, I. M.

    1986-01-01

    The regenerative fuel cell, a candidate technology for the Space Station's energy storage system, is described. An advanced development program was initiated to design, manufacture, and integrate a regenerative fuel cell Space Station prototype (RFC SSP). The RFC SSP incorporates long-life fuel cell technology, increased cell area for the fuel cells, and high voltage cell stacks for both units. The RFC SSP's potential for integration with the Space Station's life support and propulsion systems is discussed.

  2. Automation of servicibility of radio-relay station equipment

    Science.gov (United States)

    Uryev, A. G.; Mishkin, Y. I.; Itkis, G. Y.

    1985-03-01

    Automation of the serviceability of radio relay station equipment must ensure central gathering and primary processing of reliable instrument reading with subsequent display on the control panel, detection and recording of failures soon enough, advance enough warning based on analysis of detertioration symptoms, and correct remote measurement of equipment performance parameters. Such an inspection will minimize transmission losses while reducing nonproductive time and labor spent on documentation and measurement. A multichannel automated inspection system for this purpose should operate by a parallel rather than sequential procedure. Digital data processing is more expedient in this case than analog method and, therefore, analog to digital converters are required. Spepcial normal, above limit and below limit test signals provide means of self-inspection, to which must be added adequate interference immunization, stabilization, and standby power supply. Use of a microcomputer permits overall refinement and expansion of the inspection system while it minimizes though not completely eliminates dependence on subjective judgment.

  3. Space Station Freedom environmental database system (FEDS) for MSFC testing

    Science.gov (United States)

    Story, Gail S.; Williams, Wendy; Chiu, Charles

    1991-01-01

    The Water Recovery Test (WRT) at Marshall Space Flight Center (MSFC) is the first demonstration of integrated water recovery systems for potable and hygiene water reuse as envisioned for Space Station Freedom (SSF). In order to satisfy the safety and health requirements placed on the SSF program and facilitate test data assessment, an extensive laboratory analysis database was established to provide a central archive and data retrieval function. The database is required to store analysis results for physical, chemical, and microbial parameters measured from water, air and surface samples collected at various locations throughout the test facility. The Oracle Relational Database Management System (RDBMS) was utilized to implement a secured on-line information system with the ECLSS WRT program as the foundation for this system. The database is supported on a VAX/VMS 8810 series mainframe and is accessible from the Marshall Information Network System (MINS). This paper summarizes the database requirements, system design, interfaces, and future enhancements.

  4. Medical Actions in Emergencies at Nuclear Power Stations

    International Nuclear Information System (INIS)

    Casualties which could occur as a result of accidents at nuclear power stations can be categorized as follows. Those due to: (a) Over-exposure to external radiation; or (b) Excessive contamination of body surfaces with radioactive materials with, possibly, absorption of toxic quantities of these materials; (c) Combinations of (a) and (b) complicated by conventional injuries. This paper discusses the arrangements made within the Central Electricity Generating Board for dealing with casualties, taking account of the limited medical and nursing facilities. These arrangements can be summarized as follows: (a) Immediate actions on site, including first aid and rescue; (b) Plans have been agreed with the medical staff of appropriate hospitals for dealing with eventualities of this nature; (c) Adequate training programs have been instituted to include nursing and first-aid teams; (d) Rehabilitation and reemployment of injured personnel. Details of dosimetry both physical and biological which would be used to assess the extent of radioactive exposure are described. (author)

  5. Monitoring and optimization of energy consumption of base transceiver stations

    CERN Document Server

    Spagnuolo, Antonio; Vetromile, Carmela; Formosi, Roberto; Lubritto, Carmine

    2015-01-01

    The growth and development of the mobile phone network has led to an increased demand for energy by the telecommunications sector, with a noticeable impact on the environment. Monitoring of energy consumption is a great tool for understanding how to better manage this consumption and find the best strategy to adopt in order to maximize reduction of unnecessary usage of electricity. This paper reports on a monitoring campaign performed on six Base Transceiver Stations (BSs) located central Italy, with different technology, typology and technical characteristics. The study focuses on monitoring energy consumption and environmental parameters (temperature, noise, and global radiation), linking energy consumption with the load of telephone traffic and with the air conditioning functions used to cool the transmission equipment. Moreover, using experimental data collected, it is shown, with a Monte Carlo simulation based on power saving features, how the BS monitored could save energy.

  6. Central Laboratories Services

    Data.gov (United States)

    Federal Laboratory Consortium — The TVA Central Laboratories Services is a comprehensive technical support center, offering you a complete range of scientific, engineering, and technical services....

  7. Analysis of the ULF electromagnetic emission related to seismic activity, Teoloyucan geomagnetic station, 1998-2001

    OpenAIRE

    Kotsarenko, A.; Pérez Enríquez, R.; López Cruz-Abeyro, J. A.; Koshevaya, S.; V. Grimalsky; Zúñiga, F. R.

    2004-01-01

    International audience Results of ULF geomagnetic measurements at station Teoloyucan (Central Mexico, 99.11'35.735''W, 19.44'45.100''N, 2280m height) in relation to seismic activity in the period 1998-2001 and their analysis are presented. Variations of spectral densities for horizontal and vertical components, polarization densities and spectrograms of magnetic field, their derivatives are analyzed as a part of traditional analysis in this study. Values of spectral density were calculated...

  8. Spotting Epidemic Keystones by R0 Sensitivity Analysis: High-Risk Stations in the Tokyo Metropolitan Area

    Science.gov (United States)

    Yashima, Kenta; Sasaki, Akira

    2016-01-01

    How can we identify the epidemiologically high-risk communities in a metapopulation network? The network centrality measure, which quantifies the relative importance of each location, is commonly utilized for this purpose. As the disease invasion condition is given from the basic reproductive ratio R0, we have introduced a novel centrality measure based on the sensitivity analysis of this R0 and shown its capability of revealing the characteristics that has been overlooked by the conventional centrality measures. The epidemic dynamics over the commute network of the Tokyo metropolitan area is theoretically analyzed by using this centrality measure. We found that, the impact of countermeasures at the largest station is more than 1,000 times stronger compare to that at the second largest station, even though the population sizes are only around 1.5 times larger. Furthermore, the effect of countermeasures at every station is strongly dependent on the existence and the number of commuters to this largest station. It is well known that the hubs are the most influential nodes, however, our analysis shows that only the largest among the network plays an extraordinary role. Lastly, we also found that, the location that is important for the prevention of disease invasion does not necessarily match the location that is important for reducing the number of infected. PMID:27607239

  9. Central centrifugal cicatricial alopecia

    OpenAIRE

    Collin Blattner; Dennis C Polley; Frank Ferritto; Elston, Dirk M

    2013-01-01

    Central centrifugal cicatricial alopecia is a common cause of progressive permanent apical alopecia. This unique form of alopecia includes entities previously know as “hot comb alopecia,” “follicular degeneration syndrome,” “pseudopelade” in African Americans and “central elliptical pseudopelade” in Caucasians. The etiology appears to be multifactorial and the condition occurs in all races.

  10. Optimal Central Bank Transparency

    NARCIS (Netherlands)

    van der Cruijsen, C.A.B.; Eijffinger, S.C.W.; Hoogduin, L.H.

    2008-01-01

    Should central banks increase their degree of transparency any further? We show that there is likely to be an optimal intermediate degree of central bank transparency. Up to this optimum more transparency is desirable: it improves the quality of private sector inflation forecasts. But beyond the opt

  11. Optimal central bank transparency

    NARCIS (Netherlands)

    C.A.B. van der Cruijsen; S.C.W. Eijffinger; L. Hoogduin

    2008-01-01

    Should central banks increase their degree of transparency any further? We show that there is likely to be an optimal intermediate degree of central bank transparency. Up to this optimum more transparency is desirable: it improves the quality of private sector inflation forecasts. But beyond the opt

  12. Optimal central bank transparency

    NARCIS (Netherlands)

    C.A.B. van der Cruijsen; S.C.W. Eijffinger; L.H. Hoogduin

    2010-01-01

    Should central banks increase their degree of transparency any further? We show that there is likely to be an optimal intermediate degree of central bank transparency. Up to this optimum more transparency is desirable: it improves the quality of private sector inflation forecasts. But beyond the opt

  13. Central pontine myelinolysis

    Science.gov (United States)

    ... from one nerve to another. The most common cause of central pontine myelinolysis is a quick change in the body's sodium ... The nerve damage caused by central pontine myelinolysis is usually ... The disorder can cause serious long-term (chronic) disability.

  14. Central Diffraction at ALICE

    CERN Document Server

    Lämsä, Jerry W

    2011-01-01

    The ALICE experiment is shown to be well suited for studies of exclusive final states from central diffractive reactions. The gluon-rich environment of the central system allows detailed QCD studies and searches for exotic meson states, such as glueballs, hybrids and new charmonium-like states. It would also provide a good testing ground for detailed studies of heavy quarkonia. Due to its central barrel performance, ALICE can accurately measure the low-mass central systems with good purity. The efficiency of the Forward Multiplicity Detector (FMD) and the Forward Shower Counter (FSC) system for detecting rapidity gaps is shown to be adequate for the proposed studies. With this detector arrangement, valuable new data can be obtained by tagging central diffractive processes.

  15. Central diffraction at ALICE

    Energy Technology Data Exchange (ETDEWEB)

    Laemsae, J W; Orava, R, E-mail: risto.orava@helsinki.fi [Helsinki Insitute of Physics, and Division of Elementary Particle Physics, Department of Physics, PL 64 (Gustaf Haellstroeminkatu 2a), FI-00014 University of Helsinki (Finland)

    2011-02-01

    The ALICE experiment is shown to be well suited for studies of exclusive final states from central diffractive reactions. The gluon-rich environment of the central system allows detailed QCD studies and searches for exotic meson states, such as glueballs, hybrids and new charmonium-like states. It would also provide a good testing ground for detailed studies of heavy quarkonia. Due to its central barrel performance, ALICE can accurately measure the low-mass central systems with good purity. The efficiency of the Forward Multiplicity Detector (FMD) and the Forward Shower Counter (FSC) system for detecting rapidity gaps is shown to be adequate for the proposed studies. With this detector arrangement, valuable new data can be obtained by tagging central diffractive processes.

  16. Organizational centralization in radiology.

    Science.gov (United States)

    Aas, I H Monrad

    2006-01-01

    Traditionally, hospitals have a radiology department, where images are taken and interpretation occurs. Teleradiology makes it possible to capture images in one location and transmit them elsewhere for interpretation. Organizational centralization of radiology interpretations is therefore of interest. Empirical data have been collected in qualitative interviews of 26 resource persons with substantial experience with picture archiving and communication systems and teleradiology, from 12 departments of radiology in Norway. The response rate was 90%. A total of 21 theoretically possible types of centralization of image interpretation were identified, representing combinations of three categories of geographical centralization, and seven categories of centralization according to function. Various advantages and disadvantages of centralization were identified. Organizational changes may be decisive for the future of teleradiology, but it may be wise to plan for change in small steps, since we know little about how broad future organizational changes based on teleradiology will be, or what will decide how far particular organizations will go. PMID:16438776

  17. Station characteristics of the Singapore Infrasound Array

    Science.gov (United States)

    Perttu, Anna; Taisne, Benoit; Caudron, Corentin; Garces, Milton; Avila Encillo, Jeffrey; Ildefonso, Sorvigenaleon

    2016-04-01

    Singapore, located in Southeast Asia, presents an ideal location for an additional regional infrasound array, with diverse persistent natural and anthropogenic regional infrasound sources, including ~750 active or potentially active volcanoes within 4,000 kilometers. Previous studies have focused on theoretical and calculated regional signal detection capability improvement with the addition of a Singapore array. The Earth Observatory of Singapore installed a five element infrasound array in northcentral Singapore in late 2014, and this station began consistent real-time data transmission mid-2015. The Singapore array uses MB2005s microbarometers and Nanometrics Taurus digitizers. Automated array processing is carried out with the INFrasonic EneRgy Nth Octave (INFERNO) energy estimation suite, and PMCC (Progressive MultiChannel Correlation). The addition of the Singapore infrasound array to the existing International Monitoring System (IMS) infrasound stations in the region has increased regional infrasound detection capability, which is illustrated with the preliminary work on three observed meteor events of various sizes in late 2015. A meteor observed in Bangkok, Thailand in early September, 2015 was picked up by the CTBTO, however, another meteor observed in Bangkok in November was only recorded on the Singapore array. Additionally, another meteor observed over Sumatra was only recorded by one IMS station and the Singapore array. This study uses array processing and Power Spectral Density results for both the Singapore and publicly available regional IMS stations to examine station characteristics and detection capability of the Singapore array in the context of the regional IMS network.

  18. Space station architectural concepts and functional capability

    Science.gov (United States)

    Herman, D. H.

    1983-03-01

    Space program goals that NASA can best achieve by the construction of a space station in keeping with the 1958 directive to maintain U.S. pre-eminence in space technology are discussed. Science goals that can be satisfied by a suitable equipped space station include a deeper understanding of the earth/sun system and the earth as a planet, the acquisition of new data on the evolution of the solar system, of life, and of the universe, and the extended study of the laws governing the state of matter and energy. Application goals that can be pursued with a space station include assaying all renewable and nonrenewable earth resources, predicting environment, weather, and climatic changes, studying ocean dynamics, using space to develop new processes and materials, and using space for information transmission on a global basis. The space station can serve as a waypoint for voyages by manned or unmanned spacecraft, as a laboratory, observation platform, and technology proving station, and as a base for deployment and repair of other spacecraft.

  19. 30 CFR 77.1106 - Battery-charging stations; ventilation.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Battery-charging stations; ventilation. 77.1106... COAL MINES Fire Protection § 77.1106 Battery-charging stations; ventilation. Battery-charging stations shall be located in well-ventilated areas. Battery-charging stations shall be equipped with...

  20. 42 CFR 35.1 - Hospital and station rules.

    Science.gov (United States)

    2010-10-01

    ... EXAMINATIONS HOSPITAL AND STATION MANAGEMENT General § 35.1 Hospital and station rules. The officer in charge of a station or hospital of the Service is authorized to adopt such rules and issue such instructions... 42 Public Health 1 2010-10-01 2010-10-01 false Hospital and station rules. 35.1 Section...

  1. 47 CFR 80.1153 - Station log and radio watches.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Station log and radio watches. 80.1153 Section... SERVICES STATIONS IN THE MARITIME SERVICES Voluntary Radio Installations General § 80.1153 Station log and radio watches. (a) Licensees of voluntary ships are not required to maintain radio station logs....

  2. 14 CFR 1214.402 - International Space Station crewmember responsibilities.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false International Space Station crewmember... SPACE FLIGHT International Space Station Crew § 1214.402 International Space Station crewmember responsibilities. (a) All NASA-provided International Space Station crewmembers are subject to specified......

  3. 47 CFR 80.72 - Antenna requirements for coast stations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Antenna requirements for coast stations. 80.72 Section 80.72 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO... Stations § 80.72 Antenna requirements for coast stations. All emissions of a coast station a...

  4. 47 CFR 80.81 - Antenna requirements for ship stations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Antenna requirements for ship stations. 80.81 Section 80.81 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO... Stations § 80.81 Antenna requirements for ship stations. All telephony emissions of a ship station or...

  5. 47 CFR 74.3 - FCC inspections of stations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false FCC inspections of stations. 74.3 Section 74.3... Services in Part 74 § 74.3 FCC inspections of stations. (a) The licensee of a station authorized under this part must make the station available for inspection by representatives of the FCC during the...

  6. 47 CFR 73.1225 - Station inspections by FCC.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Station inspections by FCC. 73.1225 Section 73... BROADCAST SERVICES Rules Applicable to All Broadcast Stations § 73.1225 Station inspections by FCC. (a) The... FCC during the station's business hours, or at any time it is in operation. (b) In the course of...

  7. Nuclear power station siting experience in the United Kingdom: past and present and proposals for the future

    International Nuclear Information System (INIS)

    Foremost of the many factors in site selection considerations are population distribution, cooling-water availability and amenity. Others are safety of potable water sources, geological stability and the risk of external hazards. Where cooling-water supplies are a limiting factor, the choica of reactor system is of major importance. To determine as early as possible the effect a station might have on its environment, desk studies, visual surveys and wind-tunnel tests are carried out. The Central Electricity Generating Board places great importance on obtaining the fullest degree of acceptance by the public for its nuclear stations and ensures that full consultation is provided with the relevant authorities at all stages of power-station development. It also provides public exhibitions, public meetings and liaison with the local inhabitants. Recruitment of station staff where possible from the immediate area of the station and formation of sports and social clubs are two of the practical steps which help to integrate the station into the local community. Whilst the current energy crisis has reinforced the need for a substantial nuclear programme, possible ways of further reducing the impact of nuclear stations on the environment are being considered. The paper concludes that sufficient nuclear sites can be provided for future needs but that continuing effort will be required to ensure public acceptance. (author)

  8. Beaver Valley Power Station and Shippingport Atomic Power Station. 1984 Annual environmental report, radiological. Volume 2

    International Nuclear Information System (INIS)

    This report describes the Radiological Environmental Monitoring Program conducted during 1984 in the vicinity of the Beaver Valley Power Station and the Shippingport Atomic Power Station. The Radiological Environmental Program consists of on-site sampling of water and gaseous effluents and off-site monitoring of water, air, river sediments, soils, food pathway samples, and radiation levels in the vicinity of the site. This report discusses the results of this monitoring during 1984. The environmental program outlined in the Beaver Valley Power Station Technical Specifications was followed throughout 1984. The results of this environmental monitoring program show that Shippingport Atomic Power Station and Beaver Valley Power Station operations have not adversely affected the surrounding environment. 23 figs., 18 tabs

  9. Impact of suntracking on Space Station controllability

    Science.gov (United States)

    Chipman, Richard; Hu, Tsay-Hsin G.; Barber, Mark; Holmes, Eric

    The multibody dynamics of the Space Station is studied as affected by the suntracking motions of the photovotaic arrays. Dynamic responses are simulated for the Station being controlled by control moment gyros (CMGs). Controllability is shown to be a function of flight orientation, stage (inertial properties, CP-CG offset) and the suntracking dynamics. For certain combinations of these parameters, the aerodynamic, inertial disturbances and motor torques from alpha joint(s) arising from near-perfect suntracking are too large for the control moment gyro system to control. However, by imposing slight restrictions on the dynamics of the suntracking, CMGs are able to provide Station attitude stability with excellent pointing performance and an excellent microgravity environment.

  10. Space station configuration and flight dynamics identification

    Science.gov (United States)

    Metter, E.; Milman, M. H.

    1985-01-01

    The Space Station will be assembled in low earth orbit by a combination of deployable and space erectable modules that are progressively integrated during successive flights of the Shuttle. The crew assisted space construction will result in a configuration which is a large scale composite of structural elements having connectivity with a wide range of possible end conditions and imprecisely known dynamic characteristics. The generic applications of Flight Dynamics Identification to the candidate Space Station configurations currently under consideration are described. Identification functions are categorized, and the various methods for extracting parameter estimates are correlated with the sensing of parameter estimates are correlated with the sensing of specific characteristics of interest to both engineering subsystems and users of the Station's commercial and scientific facilities. Onboard implementation architecture and constraints are discussed from the viewpoint of maximizing integration of the Identification process with the flight subsystem's data and signal flow.

  11. DFS - Transmission design, payload and earth stations

    Science.gov (United States)

    Mahner, Helmut; Meyer, Juergen; Friederichs, Lothar

    The overall design and space- and ground-segment hardware for the FRG satellite communication system DFS-Kopernikus are described, and preliminary results of simulation and prototype tests are reported. The system provides 11 transparent operational channels (10 at Ku band and one at Ka band) suitable for distribution of analog FM carriers (such as TV signals) or point-to-point transmission of digital signals or high-quality TV. Standard 20-W TWTAs, 44- and 90-MHz bandwidths, and an interleaved dual-polarization scheme are employed to provide EIRP of at least 49 dBW over the entire primary coverage area. The ground segment includes Standard C stations, two Ka-band stations with 11-m antennas, and new-services stations with 3.5-m Cassegrain or 4.5-m Gregorian antennas. The network synchronization procedures are outlined, and test results demonstrating the consistently adequate performance of the system are presented graphically.

  12. Catawba nuclear station preoperational ALARA review

    International Nuclear Information System (INIS)

    This paper describes the particular emphasis placed on preoperational as los as reasonably achievable (ALARA) considerations at Duke Power's Catawba Nuclear Station. A strong station commitment to the ALARA philosophy, and review of existing capabilities, led to development of an aggressive two-part ALARA program. Capabilities consisted of sufficient numbers of available personnel, lengthy lead time during construction, a very detailed plastic model, and a sister plant of similar design. The program, as developed, consisted of a preoperational program, which looked at design and construction aspects of ALARA, and the operational program, dealing with the ALARA committee and operational problems. MAnagement's philosophy of holding everyone responsible for ALARA provided the motivation to organize the preoperational program to use that resource. The Health Physics group accepted responsibility for development, coordination, and reviewer training. The problem provided a base to build on as station personnel gained experience in their own crafts and radiation protection in general

  13. Towards Reliable Velocities of Permanent GNSS Stations

    Science.gov (United States)

    Bogusz, Janusz; Klos, Anna; Gruszczynska, Marta; Gruszczynski, Maciej

    2016-06-01

    In the modern geodesy the role of the permanent station is growing constantly. The proper treatment of the time series from such station lead to the determination of the reliable velocities. In this paper we focused on some pre-analysis as well as analysis issues, which have to be performed upon the time series of the North, East and Up components and showed the best, in our opinion, methods of determination of periodicities (by means of Singular Spectrum Analysis) and spatio-temporal correlations (Principal Component Analysis), that still exist in the time series despite modelling. Finally, the velocities of the selected European permanent stations with the associated errors determined following power-law assumption in the stochastic part is presented.

  14. Affordable Space Tourism: SpaceStationSim

    Science.gov (United States)

    2006-01-01

    For over 5 years, people have been living and working in space on the International Space Station (ISS), a state-of-the-art laboratory complex orbiting high above the Earth. Offering a large, sustained microgravity environment that cannot be duplicated on Earth, the ISS furthers humankind s knowledge of science and how the body functions for extended periods of time in space all of which will prove vital on long-duration missions to Mars. On-orbit construction of the station began in November 1998, with the launch of the Russian Zarya Control Module, which provided battery power and fuel storage. This module was followed by additional components and supplies over the course of several months. In November 2000, the first ISS Expedition crew moved in. Since then, the ISS has continued to change and evolve. The space station is currently 240 feet wide, measured across the solar arrays, and 171 feet long, from the NASA Destiny Laboratory to the Russian Zvezda Habitation Module. It is 90 feet tall, and it weighs approximately 404,000 pounds. Crews inhabit a living space of about 15,000 cubic feet. To date, 90 scientific investigations have been conducted on the space station. New results from space station research, from basic science to exploration research, are being published each month, and more breakthroughs are likely to come. It is not all work on the space station, though. The orbiting home affords many of the comforts one finds on Earth. There is a weightless "weight room" and even a musical keyboard alongside research facilities. Holidays are observed, and with them, traditional foods such as turkey and cobbler are eaten, with lemonade to wash them down

  15. Measurement of gamma radiation around base station

    International Nuclear Information System (INIS)

    The ? -radiation have been measured around base station in Isparta region of Turkey to see the contribution of base station on the background radiation. Isparta which is surrounded by high mountain of Davras is located at southern part of Turkey. There are several volcanic activity in this region. The background radiation arises from two main sources. These are natural and technological sources. The natural radiation are mainly contributed by cosmic rays and terrestrial radiation. Cosmic rays comes from outside of the atmosphere after supernova explosion in the universe. The radiation comes direct from outside of atmosphere called primer cosmic rays and some of them can create seconder particle such as neutron.proton etc after some reaction with the oxygen, nitrogen etc in the atmosphere. The origin of terrestrial radiation are some radionucleus in rocks and soils. These are mainly 40K, 238U, 232Th and their products. The terrestrial radiation depends on geological structure of the region. The other types of γ-radiation is technological origin. With the development of technology in many different fields radiation can be produced. Nowadays mobile phones are widely used technological device and this requires base station to be established around habitable area. The electromagnetic radiations from base station and its effect are always a big question in people's mind and this would be investigated. The measurement have been performed using ASP/2e counter connected to a sing NaI(Tl) γ-ray detector. It was done around five different base station and also different altitude in Davraz mountain. The radiation dose from ambient air over five months ranges from 50 to 140 nGy h-1. The contribution of base station to the natural background radiation was clearly seen in the measurement

  16. Development Prospect of China's Urban Gas Filling Station

    Institute of Scientific and Technical Information of China (English)

    Luo Zuoxian

    2006-01-01

    @@ Status of China's urban gas filling station Development scale China's urban gas filling stations have kept on increasing in recent years along with the development of gas autos. The number of urban gas filling stations in China increased to 712 in 2004 from 130 in 1999, with the growth rate 448 percent. The annual growth rate of LPG filling stations and CNG filling stations was 34.3 percent and 32.2 percent respectively (see Fig. 1).

  17. LOCATING SUGAR CANE LOADING STATIONS UNDER VARIATIONS IN CANE SUPPLY

    OpenAIRE

    SUPACHAI PATHUMNAKUL; CHATKLAO SANMUANG; NAWAPAK EUA-ANANT; KULLAPAPRUK PIEWTHONGNGAM

    2012-01-01

    This study addresses the problem of locating sugar cane loading stations and allocating cane fields to those stations. The problem is different from the general location–allocation problem in so far as this framework takes into account the different maturity periods of each cane field. If the loading station is improperly located, it can result in high transportation costs from cane fields to the station and significant fluctuations in the station utilization rate. A modification of the well-...

  18. 75 FR 75706 - Dresden Nuclear Power Station, Units 2 and 3 and Quad Cities Nuclear Power Station, Unit Nos. 1...

    Science.gov (United States)

    2010-12-06

    ... Power Station, Units 2 and 3 and Quad Cities Nuclear Power Station, Unit Nos. 1 and 2; Notice of... Nuclear Power Station, Units 2 and 3, respectively, located in Grundy County, Illinois, and to Renewed Facility Operating License Nos. DPR-29 and DPR-30 for Quad Cities Nuclear Power Station, Unit Nos. 1 and...

  19. 47 CFR 74.793 - Digital low power TV and TV translator station protection of broadcast stations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Digital low power TV and TV translator station... DISTRIBUTIONAL SERVICES Low Power TV, TV Translator, and TV Booster Stations § 74.793 Digital low power TV and TV translator station protection of broadcast stations. (a) An application to construct a new digital low...

  20. 47 CFR 73.878 - Station inspections by FCC; availability to FCC of station logs and records.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Station inspections by FCC; availability to FCC... (LPFM) § 73.878 Station inspections by FCC; availability to FCC of station logs and records. (a) The... FCC during the station's business hours, and at any time it is in operation. In the course of...

  1. Technology, Safety and Costs of Decommissioning Nuclear Reactors At Multiple-Reactor Stations

    Energy Technology Data Exchange (ETDEWEB)

    Wittenbrock, N. G.

    1982-01-01

    Safety and cost information is developed for the conceptual decommissioning of large (1175-MWe) pressurized water reactors (PWRs) and large (1155-MWe) boiling water reactors {BWRs) at multiple-reactor stations. Three decommissioning alternatives are studied: DECON (immediate decontamination), SAFSTOR (safe storage followed by deferred decontamination), and ENTOMB (entombment). Safety and costs of decommissioning are estimated by determining the impact of probable features of multiple-reactor-station operation that are considered to be unavailable at a single-reactor station, and applying these estimated impacts to the decommissioning costs and radiation doses estimated in previous PWR and BWR decommissioning studies. The multiple-reactor-station features analyzed are: the use of interim onsite nuclear waste storage with later removal to an offsite nuclear waste disposal facility, the use of permanent onsite nuclear waste disposal, the dedication of the site to nuclear power generation, and the provision of centralized services. Five scenarios for decommissioning reactors at a multiple-reactor station are investigated. The number of reactors on a site is assumed to be either four or ten; nuclear waste disposal is varied between immediate offsite disposal, interim onsite storage, and immediate onsite disposal. It is assumed that the decommissioned reactors are not replaced in one scenario but are replaced in the other scenarios. Centralized service facilities are provided in two scenarios but are not provided in the other three. Decommissioning of a PWR or a BWR at a multiple-reactor station probably will be less costly and result in lower radiation doses than decommissioning an identical reactor at a single-reactor station. Regardless of whether the light water reactor being decommissioned is at a single- or multiple-reactor station: • the estimated occupational radiation dose for decommissioning an LWR is lowest for SAFSTOR and highest for DECON • the estimated

  2. HIS Central and the Hydrologic Metadata Catalog

    Science.gov (United States)

    Whitenack, T.; Zaslavsky, I.; Valentine, D. W.

    2008-12-01

    The CUAHSI Hydrologic Information System project maintains a comprehensive workflow for publishing hydrologic observations data and registering them to the common Hydrologic Metadata Catalog. Once the data are loaded into a database instance conformant with the CUAHSI HIS Observations Data Model (ODM), the user configures ODM web service template to point to the new database. After this, the hydrologic data become available via the standard CUAHSI HIS web service interface, that includes both data discovery (GetSites, GetVariables, GetSiteInfo, GetVariableInfo) and data retrieval (GetValues) methods. The observations data then can be further exposed via the global semantics-based search engine called Hydroseek. To register the published observations networks to the global search engine, users can now use the HIS Central application (new in HIS 1.1). With this online application, the WaterML-compliant web services can be submitted to the online catalog of data services, along with network metadata and a desired network symbology. Registering services to the HIS Central application triggers a harvester which uses the services to retrieve additional network metadata from the underlying ODM (information about stations, variables, and periods of record). The next step in HIS Central application is mapping variable names from the newly registered network, to the terms used in the global search ontology. Once these steps are completed, the new observations network is added to the map and becomes available for searching and querying. The number of observations network registered to the Hydrologic Metadata Catalog at SDSC is constantly growing. At the time of submission, the catalog contains 51 registered networks, with estimated 1.7 million stations.

  3. Gravitational biology on the space station

    Science.gov (United States)

    Keefe, J. R.; Krikorian, A. D.

    1983-01-01

    The current status of gravitational biology is summarized, future areas of required basic research in earth-based and spaceflight projects are presented, and potential applications of gravitational biology on a space station are demonstrated. Topics covered include vertebrate reproduction, prenatal/postnatal development, a review of plant space experiments, the facilities needed for growing plants, gravimorphogenesis, thigmomorphogenesis, centrifuges, maintaining a vivarium, tissue culture, and artificial human organ generation. It is proposed that space stations carrying out these types of long-term research be called the National Space Research Facility.

  4. The Future Deep Underwater Space Station

    OpenAIRE

    Jianjun Yao; Guilin Jiang; Rui Xiao

    2013-01-01

    The purpose of the study is to provide an idea of developing an underwater space station. Though the ocean covers about 71% of the surface of the Earth and holds tremendous amount of resources, it is still an unknown field for human beings. With the depletion of natural resources on the land, there is an urgent need to explore and exploit the ocean, but this process is constrained by the ocean engineering equipment and technology. The study proposed a sketch of a deep sea space station, which...

  5. Check valve slam analysis in pumping station

    Directory of Open Access Journals (Sweden)

    Himr D.

    2016-01-01

    Full Text Available Pumping station supplies water for technological process. The check valve in the station was replaced with a new one. The regular test of black out discovered the high pressure pulsations accompanied with noticeable pipeline movement of discharge pipe. It was caused by late check valve closing, probably, when the back flow reached the highest possible velocity. This statement was supported with analysis of results of pressure measurement near the check valve and with a numerical simulation of the flow in the pipeline system.

  6. Cargo Assured Access to International Space Station

    Science.gov (United States)

    Smith, David A.

    2004-01-01

    Boeing's Cargo Assured Access logistics delivery system will provide a means to transport cargo to/from the International Space Station, Low Earth Orbit and the moon using Expendable Launch Vehicles. For Space Station, this capability will reduce cargo resupply backlog during nominal operations (e.g., supplement Shuttle, Progress, ATV and HTV) and augment cargo resupply capability during contingency operations (e.g., Shuttle delay and/or unavailability of International Partner launch or transfer vehicles). This capability can also provide an autonomous means to deliver cargo to lunar orbit, a lunar orbit refueling and work platform, and a contingency crew safe haven in support of NASA's new Exploration Initiative.

  7. Distributed systems for protecting nuclear power stations

    International Nuclear Information System (INIS)

    The advantages of distributed control systems for the control of nuclear power stations are obviously of great interest. Some years ago, EPRI, (Electric Power Research Institute) showed that multiplexing the signals is technically feasible, that it enables the availability specifications to be met and costs to be reduced. Since then, many distributed control systems have been proposed by the manufacturers. This note offers some comments on the application of the distribution concept to protection systems -what should be distributed- and ends with a brief description of a protection system based on microprocessors for the pressurized power stations now being built in France

  8. Refueling stations for natural gas vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Blazek, C.F.; Kinast, J.A.; Biederman, R.T.; Jasionowski, W.

    1991-01-01

    The unavailability of natural gas vehicle (NGV) refueling stations constitutes one of the major barriers to the wide spread utilization of natural gas in the transportation market. The purpose of this paper is to review and evaluate the current technical and economic status of compressed natural gas vehicle refueling stations and to identify the components or design features that offer the greatest potential for performance improvements and/or cost reductions. Both fast-fill- and slow-fill-type refueling systems will be discussed. 4 refs., 10 figs., 6 tabs.

  9. Space Station Freedom - Technical and management challenges

    Science.gov (United States)

    Moser, Thomas L.

    1988-01-01

    The development of the Space Station is reviewed, focusing on the technical and managerial aspects of the program. The optimization of the Space Station configuration, utilization impacts on design, technical aspects of the distribution systems, and the problems of designing for a lifetime of 30 years or more are discussed. In addition, cost reduction studies, testing and verification, determining the assembly sequence, and operational communications and support systems are examined. Managerial aspects of the program include organization, program control, management tools and processes, and the integration of elements from the international partners.

  10. Study of Electromagnetism Compatibility of Bleeper Station

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Transmitted power will decrease, cross-modulate distortion and inter-modulate distortion will be caused and antenna pattern will shift if transmitted antennas are fixed together. All these will lead to the alteration of area coverage. According to the basic theory of electromagnetism compatibility a computer model is established. We do some quantitative analysis of the problems above and give total number, arrangement mode and distance between antennas of bleeper station that operate at 150 MHz. The relation of these factors above are also given. All these are basis of the arrangement of antenna group of bleeper station.

  11. Fire Stations - FIRE_STATIONS_HSIP_IDHS_IN: Fire Stations in Indiana as Developed for the Homeland Security Infrastructure Program (Indiana Department of Homeland Security, Point Shapefile)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — FIRE_STATIONS_HSIP_IDHS_IN is a point shapefile that contains locations of fire station, as developed for the Homeland Security Infrastructure Program (HSIP). The...

  12. From city’s station to station city: an integrative spatial approach to the (re)development of station areas

    NARCIS (Netherlands)

    Martins da Conceição, A.

    2015-01-01

    The spaces of station areas do not fully achieve the liveability level sought out by recent redevelopment projects. Additionally, the role that architecture plays in their spatial definition seems to be constrained, likely because of the projects’ highly complex interdisciplinary planning processes.

  13. Imaging central pain syndromes.

    Science.gov (United States)

    Veldhuijzen, Dieuwke S; Greenspan, Joel D; Kim, Jong H; Coghill, Robert C; Treede, Rolf-Detlef; Ohara, Shinji; Lenz, Frederick A

    2007-06-01

    Anatomic, functional, and neurochemical imaging studies have provided new investigative tools in the study of central pain. High-resolution imaging studies allow for precise determination of lesion location, whereas functional neuroimaging studies measure pathophysiologic consequences of injury to the central nervous system. Additionally, magnetic resonance spectroscopy evaluates lesion-induced neurochemical changes in specific brain regions that may be related to central pain. The small number of studies to date precludes definitive conclusions, but the recent findings provide information that either supports or refutes current hypotheses and can serve to generate new ideas.

  14. Discussion on telluric field and seismic activity in Central Greece

    Directory of Open Access Journals (Sweden)

    J. Zlotnicki

    2000-06-01

    Full Text Available Two stations were installed in the Southeastern Thessaly basin (Central Greece, recording the geomagnetic and telluric fields from 1993 to 1996. The aim was to detect long-term abnormal changes of the telluric field, which were possibly related to imbedding earthquakes. Between January 1993 and October 1996, 213 and185 (Neraida and Mavrolofos stations respectively abnormal changes of the telluric field were observed in association with the seismic activity. The duration of these changes varied from several minutes to 24 days and the maximum amplitude was 3.8 mV/m. Data recording detected 625 and 917 seismic events for Neraida and Mavrolofos station respectively. The percentage of the earthquakes associated with the telluric anomalies is 27% and 16% respectively for each station. Both percentages are considered to be very low. Telluric activity was followed by a burst of seismic activity in areas spreading to different directions from the stations. A correlation of the characteristics of the telluric field with the earthquake magnitude was attempted, but no reliable relationship was obtained.

  15. Pilot solar hybrid power station in rural area, Rompin, Pahang, Malaysia

    International Nuclear Information System (INIS)

    Malaysia has considerable number of widely deployed small rural area. These hamlets are very much associated with Orang Asli residents. They get their source of energy by candle or kerosene light while some richer community can afford a generator set. The usual or normal system using solar as a source for electricity at rural area is standalone system for each house. As for this project, a pilot centralized solar power station will be the source of electricity to light up the fifteen houses at Kampung Denai, Rompin, Pahang, Malaysia. This system will be the first ever built for the orang asli settlement at Pahang. The objectives of this project are to design and install the solar power station at remote location and to develop standard design of stand-alone solar power station suitable for Malaysia. Orang Asli residents at Kampung Denai was chosen because there is a school for the Orang Asli children. Moreover, the remote communities are living in stratification, which makes electrical wiring easier. Furthermore, the remote area is far from the last transmission line and cumbersome to bring diesel through the rough and unpredictable land road. The main domestic energy is for residential purposes (e.g. small lighting unit, radio, television, video, etc). The generator capacity is 18.6 kW. The solar sizing was done both for the home and school appliances at Kampung Denai. The maximum demand measured was 4195.35 kW. The pilot centralized solar power station consists of 10 kW photovoltaic panels, 10 kW inverter, 150 kWh battery and other balance of system. A generator set with capacity of 12.5 kVA is installed for back up and during monsoon season. This paper will present status of the system, operational and maintenance issues, load profile of the solar power station and economics and system design of the whole system

  16. Phytoplankton from Lake Magelungen, Central Sweden 1960-1963

    International Nuclear Information System (INIS)

    The investigation of the qualitative and quantitative composition of phytoplankton in Lake Magelungen, Central Sweden, was carried out over a period of three years to illustrate the conditions before the release of waste water from the Aagesta Heat and Power Station began. Vertical sampling series were taken about once a month and samples from three different stations (named MA, MOB and MH) in the lake were analysed and compared. Most importance was laid on the quantitative composition and the differences in total volumes between the different stations. Highest volume values were always recorded in late spring and in summer. Two algal groups predominated every year, viz. chlorophytes and cyanophytes. After a moderate spring outburst caused by diatoms (Stephanodiscus, Synedra and Asterionella) peak volume values of chlorophytes were recorded in June and July. Predominating genera were Scenedesmus, Coelastrum and Pediastrum. The chlorophyte maximum was always followed by an immense development of cyanophytes (Anabaena, Aphanizomenon and Microcystis). The diatoms were well developed only during short periods, the chrysophyceans were of little significance as were all other algal groups. A marked difference existed between the Station MOB compared with the two other stations. The water at Station MOB was more polluted and several algal genera indicating the pollution were recorded. Both chlorophytes and cyanophytes were often developed in very great quantities at this station. The total volumes of phytoplankton in Lake Magelungen already are very high and the lake is to be considered as highly eutrophic. It is very possible that changes as to further additions of nutritional elements or/and changes in the thermal balance will increase the algal populations and accelerate the normal development of the lake

  17. Phytoplankton from Lake Magelungen, Central Sweden 1960-1963

    Energy Technology Data Exchange (ETDEWEB)

    Willen, Torbjoern [Inst. of Limnology, Univ of Uppsala, Uppsala (Sweden)

    1966-03-15

    The investigation of the qualitative and quantitative composition of phytoplankton in Lake Magelungen, Central Sweden, was carried out over a period of three years to illustrate the conditions before the release of waste water from the Aagesta Heat and Power Station began. Vertical sampling series were taken about once a month and samples from three different stations (named MA, MOB and MH) in the lake were analysed and compared. Most importance was laid on the quantitative composition and the differences in total volumes between the different stations. Highest volume values were always recorded in late spring and in summer. Two algal groups predominated every year, viz. chlorophytes and cyanophytes. After a moderate spring outburst caused by diatoms (Stephanodiscus, Synedra and Asterionella) peak volume values of chlorophytes were recorded in June and July. Predominating genera were Scenedesmus, Coelastrum and Pediastrum. The chlorophyte maximum was always followed by an immense development of cyanophytes (Anabaena, Aphanizomenon and Microcystis). The diatoms were well developed only during short periods, the chrysophyceans were of little significance as were all other algal groups. A marked difference existed between the Station MOB compared with the two other stations. The water at Station MOB was more polluted and several algal genera indicating the pollution were recorded. Both chlorophytes and cyanophytes were often developed in very great quantities at this station. The total volumes of phytoplankton in Lake Magelungen already are very high and the lake is to be considered as highly eutrophic. It is very possible that changes as to further additions of nutritional elements or/and changes in the thermal balance will increase the algal populations and accelerate the normal development of the lake.

  18. Central nervous system

    Science.gov (United States)

    The central nervous system is composed of the brain and spinal cord. Your brain and spinal cord serve as the main "processing center" for your entire nervous system. They control all the workings of your body.

  19. Central Data Exchange

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Central Data Exchange (CDX) enables fast, efficient and more accurate environmental data submissions from state and local governments, industry and tribes to...

  20. Central Asian Republic Info

    Data.gov (United States)

    US Agency for International Development — CAR Info is designed and managed by the Central Asian Republic Mission to fill in the knowledge and reporting gaps in existing agency systems for that Mission. It...

  1. Central nervous system resuscitation

    DEFF Research Database (Denmark)

    McIntosh, T K; Garde, E; Saatman, K E;

    1997-01-01

    Traumatic injury to the central nervous system induces delayed neuronal death, which may be mediated by acute and chronic neurochemical changes. Experimental identification of these injury mechanisms and elucidation of the neurochemical cascade following trauma may provide enhanced opportunities...

  2. Ambient Noise Tomography of central Java, with Transdimensional Bayesian Inversion

    Science.gov (United States)

    Zulhan, Zulfakriza; Saygin, Erdinc; Cummins, Phil; Widiyantoro, Sri; Nugraha, Andri Dian; Luehr, Birger-G.; Bodin, Thomas

    2014-05-01

    Delineating the crustal structure of central Java is crucial for understanding its complex tectonic setting. However, seismic imaging of the strong heterogeneity typical of such a tectonically active region can be challenging, particularly in the upper crust where velocity contrasts are strongest and steep body wave ray-paths provide poor resolution. We have applied ambient noise cross correlation of pair stations in central Java, Indonesia by using the MERapi Amphibious EXperiment (MERAMEX) dataset. The data were collected between May to October 2004. We used 120 of 134 temporary seismic stations for about 150 days of observation, which covered central Java. More than 5000 Rayleigh wave Green's function were extracted by cross-correlating the noise simultaneously recorded at available station pairs. We applied a fully nonlinear 2D Bayesian inversion technique to the retrieved travel times. Features in the derived tomographic images correlate well with previous studies, and some shallow structures that were not evident in previous studies are clearly imaged with Ambient Noise Tomography. The Kendeng Basin and several active volcanoes appear with very low group velocities, and anomalies with relatively high velocities can be interpreted in terms of crustal sutures and/or surface geological features.

  3. Centralization and political accountability

    OpenAIRE

    Hindriks, Jean; Lockwood, Ben

    2004-01-01

    In this paper we abstract from the usual gains and costs of decentralization (e.g. preference matching, spillovers and economies of scale). Instead we compare the political accountability of decentralized governments relative to centralized ones when there is a risk of "bad" governance. We study both the selection and incentive effects of accountability. A key aspect of centralization is to make the politician answerable to multiple constituencies subject to a common budget constraint. Our ma...

  4. Central Bank independence

    OpenAIRE

    Vasile DEDU; Tiberiu STOICA

    2012-01-01

    In this paper we present the key aspects regarding central bank’s independence. Most economists consider that the factor which positively influences the efficiency of monetary policy measures is the high independence of the central bank. We determined that the National Bank of Romania (NBR) has a high degree of independence. NBR has both goal and instrument independence. We also consider that the hike of NBR’s independence played an important role in the significant disin...

  5. Outsourcing central banking

    DEFF Research Database (Denmark)

    Khoury, Sarkis Joseph; Wihlborg, Clas

    2005-01-01

    The literature on Currency Boards (CB) stops at the water edge in terms of dealing with the totality of the functions of a central bank. Monetary policy, and banking supervisioncan be "outsourced" in an open economy with substantial foreign direct investment (FDI)in the banking sector if political...... the feasibility of, and constraints on, outsourcing of central bank functions. A brief discussion of the Argentinian experience is used for contrast.Key words: Currency Board, Foreign Banks, Supervision, Regional Integration,outsourcing....

  6. 78 FR 67309 - Earth Stations Aboard Aircraft

    Science.gov (United States)

    2013-11-12

    ...), and (d) published at 78 FR 14920 on March 8, 2013, are effective on November 12, 2013. FOR FURTHER...-161, published at 78 FR 14920, March 8, 2013. The OMB Control Number is 3060-1187. The Commission... COMMISSION 47 CFR Part 25 Earth Stations Aboard Aircraft AGENCY: Federal Communications Commission....

  7. PROSPECTS AND FEATURES OF BIOGASOLINE STATIONS

    Directory of Open Access Journals (Sweden)

    Grigorash O. V.

    2015-04-01

    Full Text Available The article deals with one of the promising areas belonging to energy-saving technologies; it is the introduction of biogasoline stations into agricultural production. The analysis of the application in the world has been shown. To determine the cost-effectiveness of biogasoline stations we have shown the data for the calculation of the potential of biomass: organic waste settlements; animal waste; waste of poultry; crop residues; waste processing industry. We have obtained graphic dependences of electricity generated in the day from livestock and poultry, as well as the number of sunflower, rice, and sugar beets. The table also shows the thermal properties of organic agricultural wastes, allowing increasing the efficiency of calculations to determine the biomass resources. We have considered the schemes of biogasoline stations, a gas turbine power plant and a steam turbine power plant and disclosed the features of their work. To improve the operating and technical specifications of the stations intended for power generation we have proposed using non-contact generators and stabilization of parameters of electric power in their designs to carry out direct frequency converter. We have disclosed the advantages and disadvantages of biogas, as well as the direction of its effective use. It is shown that the use of all the possibilities in the complex of biogasoline stationns (production of fertilizers and motor oil, production of heat and electricity would improve the efficiency and the payback of investment would be from 3 to 5 years, which is mainly determined by the volumes of biomass

  8. Variability of TEC over an equatorial station

    International Nuclear Information System (INIS)

    Variability in TEC obtained by the Faraday rotation technique at an equatorial station is investigated. Diurnal, seasonal and solar cycle effects were observed. Both absolute and relative variability were considered. The trend of variations in absolute variability is completely different from those of relative variability. (author)

  9. National FCEV and Hydrogen Fueling Station Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Bush, Brian; Melaina, Marc

    2016-06-09

    This presentation provides a summary of the FY16 activities and accomplishments for NREL's national fuel cell electric vehicle (FCEV) and hydrogen fueling station scenarios project. It was presented at the U.S. Department of Energy Hydrogen and Fuel Cells Program 2016 Annual Merit Review and Peer Evaluation Meeting on June 9, 2016, in Washington, D.C.

  10. New control system: displays on stations screens

    International Nuclear Information System (INIS)

    Setting applications display on control stations screens uses X-WINDOWS and graphic interface MOTIF. Representation of Y=f(x) and of data tables are displayed by the utilization P-GRAPHICS package using simplified functions of GOBE library routines. (A.B.). 1 fig

  11. Simple Solutions for Space Station Audio Problems

    Science.gov (United States)

    Wood, Eric

    2016-01-01

    Throughout this summer, a number of different projects were supported relating to various NASA programs, including the International Space Station (ISS) and Orion. The primary project that was worked on was designing and testing an acoustic diverter which could be used on the ISS to increase sound pressure levels in Node 1, a module that does not have any Audio Terminal Units (ATUs) inside it. This acoustic diverter is not intended to be a permanent solution to providing audio to Node 1; it is simply intended to improve conditions while more permanent solutions are under development. One of the most exciting aspects of this project is that the acoustic diverter is designed to be 3D printed on the ISS, using the 3D printer that was set up earlier this year. Because of this, no new hardware needs to be sent up to the station, and no extensive hardware testing needs to be performed on the ground before sending it to the station. Instead, the 3D part file can simply be uploaded to the station's 3D printer, where the diverter will be made.

  12. 47 CFR 78.69 - Station records.

    Science.gov (United States)

    2010-10-01

    ... operator's supervision. (e) When a station in this service has an antenna structure which is required to be... was made, if an automatic alarm system is not employed. (3) In the event of any observed or otherwise... associated tower lighting control devices, indicators, and alarm systems. (ii) Any adjustments,...

  13. 76 FR 3064 - Travelers Information Stations

    Science.gov (United States)

    2011-01-19

    ... entities.'' The Commission specifically noted that such stations had been used to reduce traffic congestion... voice information pertaining to traffic and road conditions, traffic hazard and travel advisories... ``noncommercial voice information pertaining to traffic and road conditions, traffic hazard and travel...

  14. Space Station-Baseline Configuration With Callouts

    Science.gov (United States)

    1989-01-01

    In response to President Reagan's directive to NASA to develop a permanent marned Space Station within a decade, part of the State of the Union message to Congress on January 25, 1984, NASA and the Administration adopted a phased approach to Station development. This approach provided an initial capability at reduced costs, to be followed by an enhanced Space Station capability in the future. This illustration depicts the baseline configuration, which features a 110-meter-long horizontal boom with four pressurized modules attached in the middle. Located at each end are four photovoltaic arrays generating a total of 75-kW of power. Two attachment points for external payloads are provided along this boom. The four pressurized modules include the following: A laboratory and habitation module provided by the United States; two additional laboratories, one each provided by the European Space Agency (ESA) and Japan; and an ESA-provided Man-Tended Free Flyer, a pressurized module capable of operations both attached to and separate from the Space Station core. Canada was expected to provide the first increment of a Mobile Serving System.

  15. Fifteen years of international space station

    NARCIS (Netherlands)

    Verhagen, B.; Celebi, T.

    2014-01-01

    The International Space Station (ISS) celebrated its 15th birthday in October 2013. The ISS is the largest spaceship ever built by humans and very important for research, to understand life and physics. However, the ISS is very expensive to maintain and therefore some people argue that the ISS progr

  16. Microgravity particle research on the Space Station

    Energy Technology Data Exchange (ETDEWEB)

    Squyres, S.W.; Mckay, C.P.; Schwartz, D.E.

    1987-12-01

    Science questions that could be addressed by a Space Station Microgravity Particle Research Facility for studying small suspended particles were discussed. Characteristics of such a facility were determined. Disciplines covered include astrophysics and the solar nebula, planetary science, atmospheric science, exobiology and life science, and physics and chemistry.

  17. Safety distances for hydrogen filling stations

    NARCIS (Netherlands)

    Matthijsen, A J C M; Kooi, E S

    2006-01-01

    In the context of spatial planning the Dutch Ministry of Housing, Spatial Planning and the Environment asked the Centre for External Safety of the National Institute for Public Health and the Environment (RIVM) to advice on safe distances pertaining to hydrogen filling stations. The RIVM made use of

  18. Manned remote work station development article

    Science.gov (United States)

    1978-01-01

    Flight article and associated design concepts are evaluated to meet fundamental requirements of a universal crew cabin to be used as a construction cherrypicker, a space crane turret, a railed work station, or a free flyer. Key technology developments are embodied into a simulation program. A schedule and simulation test plan matrix is given for the open cabin cherry picker.

  19. Technical Design Report, Second Target Station

    Energy Technology Data Exchange (ETDEWEB)

    Galambos, John D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Anderson, David E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bechtol, D. [HDR, Inc., Chattanooga, TN (United States); Bethea, Katie L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Brown, N. [Barge Waggoner Sumner & Cannon, Inc., Nashville, TN (United States); Carden, W. F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chae, Steven M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Clark, A. [Barge Waggoner Sumner & Cannon, Inc., Nashville, TN (United States); Counce, Deborah M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Craft, K. [Barge Waggoner Sumner & Cannon, Inc., Nashville, TN (United States); Crofford, Mark T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Collins, Richard M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cousineau, Sarah M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Curry, Douglas E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cutler, Roy I. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dayton, Michael J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dean, Robert A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Deibele, Craig E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Doleans, Marc [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dye, T. [HDR, Inc., Chattanooga, TN (United States); Eason, Bob H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Eckroth, James A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Fincrock, C. [HDR, Inc., Chattanooga, TN (United States); Fritts, S. [Barge Waggoner Sumner & Cannon, Inc., Nashville, TN (United States); Gallmeier, Franz X. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gawne, Ken R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hartman, Steven M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Herwig, Kenneth W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hess, S. [HDR, Inc., Chattanooga, TN (United States); Holmes, Jeffrey A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Horak, Charlie M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Howell, Matthew P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Iverson, Erik B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jacobs, Lorelei L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jones, Larry C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Johnson, B. [HDR, Inc., Chattanooga, TN (United States); Johnson, S. [HDR, Inc., Chattanooga, TN (United States); Kasemir, Kay [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kim, Sang-Ho [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Laughon, Gregory J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lu, W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Mahoney, Kelly L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Mammosser, John [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); McManamy, T. [McManamy Consulting, Inc., Knoxville, TN (United States); Michilini, M. [HDR, Inc., Chattanooga, TN (United States); Middendorf, Mark E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); O' Neal, Ed [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nemec, B. [Barge Waggoner Sumner & Cannon, Inc., Nashville, TN (United States); Peters, Roy Cecil [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Plum, Michael A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Reagan, G. [Barge Waggoner Sumner & Cannon, Inc., Nashville, TN (United States); Remec, Igor [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rennich, Mark J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Riemer, Bernie [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Saethre, Robert B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Schubert, James Phillip [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Shishlo, Andrei P. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Smith, C. Craig [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Strong, William Herb [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tallant, Kathie M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tennant, David Alan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Thibadeau, Barbara M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Trumble, S. [HDR, Inc., Chattanooga, TN (United States); Trotter, Steven M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wang, Z. [Institute of Modern Physics (IMP), Chinese Academy of Sciences (China); Webb, Steven B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Williams, Derrick C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); White, Karen S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Zhao, Jinkui [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-01-01

    The Second Target Station (STS) is a proposed upgrade for SNS. It includes a doubling of the accelerator power and an additional instrument hall. The new instrument hall will receive a 467 kW 10 Hz beam. The parameters and preliminary design aspects of the STS are presented for the accelerator, target systems, instrument hall, instruments and civil construction aspects.

  20. Sediment transport dynamics at the Ria de Vigo inferred from two mooring stations

    Science.gov (United States)

    Campistegui, Aimar; Bernabeu, Ana; Rey, Daniel

    2010-05-01

    The aim of this study is to characterise bottom currents and associated seafloor sediments at the Ría de Vigo, a 28 km long by 12 km wide funnel shaped coastal embayments at the NW coast of the Iberian Peninsula. The embayment is south-westerly oriented, against the general northerly trend of the main coast, and partially closed at its mouth by the Cies Islands. Forms a wide U-valley with central depths varying from 10 to 60 m. Hydrodynamics shows a semidiurnal mesotidal regime, negative estuarine circulation; and important south-western wave climate component, particularly in winter. Coarse sediments are mostly siliciclastic-bioclastic carbonates mixtures and are preferentially distributed at shallow depths parallel to the coast. Fine grained sediments mostly consist of mud and are preferentially distributed in the most internal parts and occupying the deep central parts of the embayment. The survey was carried mooring two stations at the inner and outer parts of the embayment, the later quite close to the southern mouth. In each station the current velocity and direction, salinity, temperature, turbidity, pressure and dissolved oxygen were measured near the bottom. The survey period covered two weeks, from June 28th till July 11th of 2005. Surficial sediment grain size was characterised in representative sediment samples from different points of the ría, including the stations sites, using box corers. The analyzed temperature and salinity data show an upwelling process, taking place since the third day on, registering low temperature values, about 13°C and high salinity values, about 36.5 ppt. During the non-upwelling period the bottom current direction in both stations was different, NE during the flood SW during the ebb, at the station 1 and eastwards during the flood and SW during the ebb at the station 2. But during the upwelling period was the same at both stations, NE-SW. At the same time the velocity during whole survey period was higher in the first

  1. Data Authentication Demonstration for Radionuclide Stations

    Energy Technology Data Exchange (ETDEWEB)

    Harris, Mark; Herrington, Pres; Miley, Harry; Ellis, J. Edward; McKinnon, David; St. Pierre, Devon

    1999-08-03

    Data authentication is required for certification of sensor stations in the International Monitoring System (IMS). Authentication capability has been previously demonstrated for continuous waveform stations (seismic and infrasound). This paper addresses data surety for the radionuclide stations in the IMS, in particular the Radionuclide Aerosol Sampler/Analyzer (RASA) system developed by Pacific Northwest National Laboratory (PNNL). Radionuclide stations communicate data by electronic mail using formats defined in IMS 1.0, Formats and Protocols for Messages. An open message authentication standard exists, called S/MIME (Secure/Multipurpose Internet Mail Extensions), which has been proposed for use with all IMS radionuclide station message communications. This standard specifies adding a digital signature and public key certificate as a MIME attachment to the e-mail message. It is advantageous because it allows authentication to be added to all IMS 1.0 messages in a standard format and is commercially supported in e-mail software. For command and control, the RASA system uses a networked Graphical User Interface (GUI) based upon Common Object Request Broker Architecture (CORBA) communications, which requires special authentication procedures. The authors have modified the RASA system to meet CTBTO authentication guidelines, using a FORTEZZA card for authentication functions. They demonstrated signing radionuclide data messages at the RASA, then sending, receiving, and verifying the messages at a data center. They demonstrated authenticating command messages and responses from the data center GUI to the RASA. Also, the particular authentication system command to change the private/public key pair and retrieve the new public key was demonstrated. This work shows that data surety meeting IMS guidelines may be immediately applied to IMS radionuclide systems.

  2. Site response investigation at the seismological station

    International Nuclear Information System (INIS)

    The work is focused on research on the influence of geological background of seismic station Ostrava-Krasne Pole (OKC) on the dynamic parameters of seismic unrest observed at this station, namely: the speed of oscillation amplitude ui (m/s) and frequency content of f (Hz) of these oscillations. In the experiment, seismic unrest was registered simultaneously in the original seismic basement (OKC A) and experimental drift (OKC B). The survey results showed significant amplitude velocity differences between the values measured during both day and night on each of the habitats, but were also found significant differences in velocity amplitudes between different habitats during the day or night, as the following range of values observed: OKC station A: ui ≅ 30 nm/s (night) and ui up to 170 nm/s (day); OKC station B ui ≅ 20 nm/s (night) ui up to 70 nm/s (day). Amplifying effect of subsoil seismic basement (OKC A) was explained by about 22 m thick layer of unconsolidated sediments with a mosque acoustic resistance (clay loam, sand and gravel) as compared with the bedrock tunnel that has outcrops of kulmske shale in background. To calculate the amplitude spectra the FFT method was used that has been in the range of frequencies f = (2 - 26) Hz and then scaling the spectrum. While the spectrum of the OKC stations A and B have the OKC components of NS and a significant peak at frequencies f ≅ 10 Hz for the EW component peak shifted to higher frequencies, and that f = (12 - 16) Hz. In principle the courses of standard spectra on the corresponding components have very similar, almost identical character. (authors)

  3. Assessment of the once-through cooling alternative for central steam-electric generating stations

    Energy Technology Data Exchange (ETDEWEB)

    Paddock, R. A.; Ditmars, J. D.

    1978-12-01

    The efficacy of the disposal of waste heat from steam-electric power generation by means of once-through cooling systems was examined in the context of the physical aspects of water quality standards and guidelines for thermal discharges. Typical thermal standards for each of the four classes of water bodies (rivers, lakes, estuaries, and coastal waters) were identified. The mixing and dilution characteristics of various discharge modes ranging from simple, shoreline surface discharges to long, submerged multiport diffusers were examined in terms of the results of prototype measurements, analytical model predictions, and physical model studies. General guidelines were produced that indicate, for a given plant capacity, a given type of receiving water body, and a given discharge mode, the likelihood that once-through cooling can be effected within the restrictions of typical thermal standards. In general, it was found that shoreline surface discharges would not be adequate for large power plants (greater than or equal to 500 MW) at estuarine and marine coastal sites, would be marginally adequate at lake sites, and would be acceptable only at river sites with large currents and river discharges. Submerged multiport diffusers were found to provide the greatest likelihood of meeting thermal standards in all receiving water environments.

  4. US central station nuclear electric generating units: significant milestones (status as of July 1, 1980)

    International Nuclear Information System (INIS)

    The status of 189 US nuclear power plants is reported in a table which gives the name, owner, capacity, type, NSSS architect and contractor and data of public announcement, NSSS order, licensing, and initial operation. The plants are also indexed according to state, region, utility, and alphabetical name. The utility nuclear steam supply system orders are also listed

  5. 78 FR 2416 - Agency Information Collection Activities: Application To Establish a Centralized Examination Station

    Science.gov (United States)

    2013-01-11

    ... necessary for the proper performance of the functions of the agency, including whether the information shall... the applicant's facility; the fairness of fee structure; and knowledge of cargo handling operations and of CBP procedures. The names of all corporate officers and all employees who will come in...

  6. Soil Temperature Station Data from Permafrost Regions of Russia (Selection of Five Stations), 1880s - 2000

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set includes soil temperature data from boreholes located at five stations in Russia: Yakutsk, Verkhoyansk, Pokrovsk, Isit', and Churapcha. The data have...

  7. US Coast Guard Stations in Louisiana, Geographic NAD83, USCG [coast_guard_stations_USCG_1997

    Data.gov (United States)

    Louisiana Geographic Information Center — This is is a point dataset for the locations and attributes of eight US Coast Guard stations in Louisiana. The attributes include name, address, latitude (NAD27),...

  8. On measuring surface wave phase velocity from station-station cross-correlation of ambient signal

    OpenAIRE

    Boschi, Lapo; Weemstra, Cornelis; Verbeke, Julie; Ekström, Göran; Zunino, Andrea; Giardini, Domenico

    2013-01-01

    International audience We apply two different algorithms to measure surface wave phase velocity, as a function of frequency, from seismic ambient noise recorded at pairs of stations from a large European network. The two methods are based on consistent theoretical formulations, but differ in the implementation: one method involves the time-domain cross-correlation of signal recorded at different stations; the other is based on frequency-domain cross-correlation, and requires finding the ze...

  9. Studying dynamics of indicators of nuclear power stations exploitation (the case of US nuclear power stations)

    OpenAIRE

    Varshavsky, Leonid

    2013-01-01

    Analysis of external and internal factors influencing significant improvement of economic indicators of US nuclear power stations in the 1990s is carried out. Approaches to modeling dynamics of capacity factors of nuclear power stations are proposed. Comparative analysis of dynamics of capacity factors and occupational radiation exposure for various generations of US nuclear power plants is carried out. Dynamical characteristics of «learning by doing» effects for analyzed indicators are measu...

  10. CENTRAL PLATEAU REMEDIATION

    Energy Technology Data Exchange (ETDEWEB)

    ROMINE, L.D.

    2006-02-01

    A systematic approach to closure planning is being implemented at the Hanford Site's Central Plateau to help achieve the goal of closure by the year 2035. The overall objective of Central Plateau remediation is to protect human health and the environment from the significant quantity of contaminated material that resulted from decades of plutonium production in support of the nation's defense. This goal will be achieved either by removing contaminants or placing the residual contaminated materials in a secure configuration that minimizes further migration to the groundwater and reduces the potential for inadvertent intrusion into contaminated sites. The approach to Central Plateau cleanup used three key concepts--closure zones, closure elements, and closure process steps--to create an organized picture of actions required to complete remediation. These actions were merged with logic ties, constraints, and required resources to produce an integrated time-phased schedule and cost profile for Central Plateau closure. Programmatic risks associated with implementation of Central Plateau closure were identified and analyzed. Actions to mitigate the most significant risks are underway while high priority remediation projects continue to make progress.

  11. PV-solar / wind hybrid energy system for GSM/CDMA type mobile telephony base station

    Directory of Open Access Journals (Sweden)

    Pragya Nema, R.K. Nema, Saroj Rangnekar

    2010-03-01

    Full Text Available This paper gives the design idea of optimized PV-Solar and Wind Hybrid Energy System for GSM/CDMA type mobile base station over conventional diesel generator for a particular site in central India (Bhopal . For this hybrid system ,the meteorological data of Solar Insolation, hourly wind speed, are taken for Bhopal-Central India (Longitude 77o.23'and Latitude 23o.21' and the pattern of load consumption of mobile base station are studied and suitably modeled for optimization of the hybrid energy system using HOMER software. The simulation and optimization result gives the best optimized sizing of wind turbine and solar array with diesel generator for particular GSM/CDMA type mobile telephony base station. This system is more cost effective and environmental friendly over the conventional diesel generator. It should reduced approximate 70%-80% fuel cost over conventional diesel generator and also reduced the emission of CO2 and other harmful gasses in environments. It is expected that the newly developed and installed system will provide very good opportunities for telecom sector in near future.

  12. MOZART - A seismological investigation of Central Mozambique

    Science.gov (United States)

    Domingues, Ana; Chamussa, Jose; Helffrich, George; Fishwick, Stewart; Ferreira, Ana; Custodio, Susana; Silveira, Graca; Manhica, Vladimiro; Fonseca, Joao

    2013-04-01

    Project MOZART (MOZAmbique Rift Tomography) aims to investigate the geological structure and current tectonic activity of the Mozambique sector of the East African Rift System (EARS). Space geodesy has indicated in recent years that the border between Nubia and the Somalian plate at these latitudes (16°S to 24°S) encompasses the Rovuma microplate, but little is known about its geometry or seismotectonics. The M7 Machaze earthquake of 2006 highlighted the relevance of the associated deformation, and motivated the MOZART deployment. Besides the regional seismotectonics, other targets of the project are the illumination of the Mesoproterozoic structures of the Mozambique Belt, and the study of its role in the current incipient rifting. The seismic network is composed of 30 VBB seismographic stations on loan from NERC's SEIS-UK Pool (Guralp CMG-3T 120s sensors) covering Central Mozambique (Manica, Sofala, Gaza and Inhambane provinces) with average inter-station spaces of the order of 100 km. Four stations are across the border in South Africa (Kruger Park). Data acquisition started in March 2011, and decommissioning is foreseen for August 2013. Data processing is underway, and includes local seismicity analysis, receiver function estimation and the study of surface wave dispersion (both ambient noise and teleseismic). Once a preliminary velocity model is developed with these techniques, further refinements will be attempted through waveform tomography. For this purpose, SPECFEM waveform modelling with a 3D velocity model is currently being implemented. Preliminary results of the ongoing data processing and analysis will be presented.

  13. Mantle Structure Beneath Central South America

    Science.gov (United States)

    Vandecar, J. C.; Silver, P. G.; James, D. E.; Assumpcao, M.; Schimmel, M.; Zandt, G.

    2003-12-01

    Making use of 60 digital broadband seismic stations that have operated across central South America in recent years, we have undertaken an inversion for the upper- and uppermost lower-mantle P- and S-wave velocity structures beneath the region. We have combined data from four portable PASSCAL-type experiments as well as the 3 GTSN permanent stations (LPAZ, BDFB and CPUP) and 1 Geoscope station (SPB) located in the region. The portable data were deployed at various times between 1992 and 1999 and include: 28 sites from the Brazilian Lithosphere Seismic Project (BLSP: Carnegie Institution of Washington and Universidade de Sao Paulo), 16 sites from the Broadband ANdean JOint experiment (BANJO: Carnegie Institution of Washington and University of Arizona), 8 sites from the Seismic Exploration of the Deep Altiplano project (SEDA: Lawrence Livermore National Laboratory) and 4 sites from the University of Brasilia. The P- and S-wave relative delay times are independently obtained via a multi-channel cross correlation of band-passed waveforms for each teleseismic event. These data are then inverted using an iterative, robust, non-linear scheme which parameterizes the 3-D velocity variations as splines under tension constrained at over 120,000 nodes across South America between latitudes of 15 and 30 degrees South. Amongst other features, we robustly image the high-velocity subducting Nazca plate penetrating into the lower mantle and the high-velocity root of the ~3.2 Gyr old Sao Francisco Craton extending to depths of 200-300 km. We will discuss the consistency between our tomographic models and predictions of dynamic mantle models based on plate tectonic reconstructions of subduction.

  14. Colloquium on Central Asia

    International Nuclear Information System (INIS)

    This colloquium on Azerbaijan was organized by the direction of international relations of the French Senate and the French center of foreign trade (CFCE). This document gathers the interventions of the participants and the debates with the audience following these interventions. The topics treated concern: - the present day political-economical situation of Central Asia countries (problem of borders, relations with Russia and China); - the economies of Central Asia countries: short term problems and medium-term perspectives; - the relations with the European Union (political, economical, trade and investments, perspectives); - the European energy stakes of Caspian sea (oil and gas reserves, development of hydrocarbon resources, exploitation and transport constraints, stakes for Europe and France); - TotalFinaElf company in Central Asia (Kazakhstan, Azerbaijan, enclavement problem); - the economical impacts of the TRACECA pathway (Transport Corridor Europe Caucasus Asia). (J.S.)

  15. SOCRATES Invades Central Europe

    Directory of Open Access Journals (Sweden)

    Joseph Slowinski

    1998-04-01

    Full Text Available The objective of this article is to explore the current reality faced by higher education students in Central and Eastern Europe and to draw out the implications of this current reality for policy makers in the future. In the article, I explore the influence of transnational corporations' training programs on education as it currently pertains to Central and Eastern European higher education and employment. In addition, multinational corporate entities exercise influence on European Union policy through the role of lobby organizations and activities. I explore the influence of these practices on education with an emphasis on the emerging importance of Western language skills. In addition, I focus on the European Union and its efforts to expand into Central and Eastern Europe in order to provide a focal point for analysis.

  16. The Naive Central Banker

    Directory of Open Access Journals (Sweden)

    Marcelo de Carvalho Griebeler

    2015-09-01

    Full Text Available There has been in some countries a trend of assigning other functions to central banks besides price stability. The most suggested function to be added to monetary authority’s obligations is to pursue economic growth or full employment. In this paper we characterize the behavior and analyse the optimal monetary policy of, what we call, a naive central banker. We describe the naive behavior as one that does face the inflation-unemployment trade-off, but it tries to minimize both variables simultaneously. Our findings, both under discretion and commitment, indicate that the naive central banker delivers lower expected inflation and inflation variance than the benchmark behavior whenever the economy is rigid enough. However, the degree of conservativeness also affects this result, such that the less conservative the naive policymaker, the more rigidity is necessary.

  17. VIIP: Central Nervous System (CNS) Modeling

    Science.gov (United States)

    Vera, Jerry; Mulugeta, Lealem; Nelson, Emily; Raykin, Julia; Feola, Andrew; Gleason, Rudy; Samuels, Brian; Ethier, C. Ross; Myers, Jerry

    2015-01-01

    Current long-duration missions to the International Space Station and future exploration-class missions beyond low-Earth orbit expose astronauts to increased risk of Visual Impairment and Intracranial Pressure (VIIP) syndrome. It has been hypothesized that the headward shift of cerebrospinal fluid (CSF) and blood in microgravity may cause significant elevation of intracranial pressure (ICP), which in turn may then induce VIIP syndrome through interaction with various biomechanical pathways. However, there is insufficient evidence to confirm this hypothesis. In this light, we are developing lumped-parameter models of fluid transport in the central nervous system (CNS) as a means to simulate the influence of microgravity on ICP. The CNS models will also be used in concert with the lumped parameter and finite element models of the eye described in the related IWS works submitted by Nelson et al., Feola et al. and Ethier et al.

  18. Hale Central Peak

    Science.gov (United States)

    2004-01-01

    19 September 2004 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows some of the mountains that make up the central peak region of Hale Crater, located near 35.8oS, 36.5oW. Dark, smooth-surfaced sand dunes are seen to be climbing up the mountainous slopes. The central peak of a crater consists of rock brought up during the impact from below the crater floor. This autumn image is illuminated from the upper left and covers an area approximately 3 km (1.9 mi) across.

  19. Central Bank independence

    Directory of Open Access Journals (Sweden)

    Vasile DEDU

    2012-08-01

    Full Text Available In this paper we present the key aspects regarding central bank’s independence. Most economists consider that the factor which positively influences the efficiency of monetary policy measures is the high independence of the central bank. We determined that the National Bank of Romania (NBR has a high degree of independence. NBR has both goal and instrument independence. We also consider that the hike of NBR’s independence played an important role in the significant disinflation process, as headline inflation dropped inside the targeted band of 3% ± 1 percentage point recently.

  20. Several Centuries of Centrality

    OpenAIRE

    Roth, Dana L.

    2015-01-01

    As Carolyn Bertozzi mentioned in her inaugural editorial, the relationship of “Central Science” to “Chemistry” became popularized over 40 years ago with the publication of the first edition of Brown and LeMay’s Chemistry: The Central Science, now in its 13th edition. Yet as late as 2003, Prof. Sason Shaik at The Hebrew University claimed “popularization of chemistry remains scant.” He goes on to share [his] “own experience of popularizing chemistry by delivering the following universal messag...